Science.gov

Sample records for acid volatile sulfides

  1. ACID-VOLATILE SULFIDE AS A FACTOR MEDIATING CADMIUM AND NICKEL BIOAVAILABILITY IN CONTAMINATED SEDIMENTS

    EPA Science Inventory

    We investigated the influence of sulfide, measured as acid-volatile sulfide (AVS), on the bioavailability of cadmium and nickel in sediments. eventeen samples from an estuarine system heavily contaminated with cadmium and nickel were analyzed for AVS and simultaneously extracted ...

  2. Interlaboratory comparison of measurements of acid-volatile sulfide and simultaneously extracted nickel in spiked sediments

    USGS Publications Warehouse

    Brumbaugh, William G.; Hammerschmidt, Chad R.; Zanella, Luciana; Rogevich, Emily; Salata, Gregory; Bolek, Radoslaw

    2011-01-01

    An interlaboratory comparison of acid-volatile sulfide (AVS) and simultaneously extracted nickel (SEM_Ni) measurements of sediments was conducted among five independent laboratories. Relative standard deviations for the seven test samples ranged from 5.6 to 71% (mean?=?25%) for AVS and from 5.5 to 15% (mean?=?10%) for SEM_Ni. These results are in stark contrast to a recently published study that indicated AVS and SEM analyses were highly variable among laboratories.

  3. Interlaboratory comparison of measurements of acid-volatile sulfide and simultaneously extracted nickel in spiked sediments

    USGS Publications Warehouse

    Brumbaugh, W.G.; Hammerschmidt, C.R.; Zanella, L.; Rogevich, E.; Salata, G.; Bolek, R.

    2011-01-01

    An interlaboratory comparison of acid-volatile sulfide (AVS) and simultaneously extracted nickel (SEM-Ni) measurements of sediments was conducted among five independent laboratories. Relative standard deviations for the seven test samples ranged from 5.6 to 71% (mean=25%) for AVS and from 5.5 to 15% (mean=10%) for SEM-Ni. These results are in stark contrast to a recently published study that indicated AVS and SEM analyses were highly variable among laboratories. ?? 2011 SETAC.

  4. Heavy metals and acid-volatile sulfides in sediments of the Tijuana Estuary

    SciTech Connect

    Meyer, S.F.; Gersberg, R.M.

    1997-12-31

    The Tijuana Estuary in San Diego County, CA is a wetland-dominated estuary, which has been designated a National Estuarine Sanctuary for protection of a number of endangered species and their habitat. For decades, raw sewage from the city of Tijuana, Mexico has flowed into the Tijuana River and across the international border into the Tijuana Estuary. This problem has worsened in recent years with the substantial growth of Tijuana`s population along with intensive industrial development. Unfortunately, due to many factors, an industrial pretreatment program similar to one implemented in the United States, has not been initiated in Mexico, and the threat of chemical contamination of the Tijuana Estuary exists. To date, however, the degree and spatial nature of such contamination has not been well assessed. We report here on the levels of selected toxic metals in the sediments of the estuary. Additionally, we measured both acid-volatile sulfides (AVS) and simultaneously extracted metals (SEM) in order to estimate the potential toxicity of these estuarine sediments.

  5. Effects of acid-volatile sulfide on zinc bioavailability and toxicity to benthic macroinvertebrates: A spiked sediment field experiment

    SciTech Connect

    Liber, K.; Call, D.J.; Markee, T.P.; Schmude, K.L.; Balcer, M.D.; Whiteman, F.W.; Ankley, G.T.

    1996-12-01

    Acid-volatile sulfide (AVS) has been proposed as the primary normalization phase for the development of sediment quality criteria for certain cationic metals. This study was designed to assist in this development by providing necessary field data on the relationships among season, AVS concentrations, and zinc bioavailability and toxicity in freshwater sediments. Zinc was spiked into uncontaminated sediments collected from a local pond, creating five simultaneously extracted metal (SEM) concentrations ranging from 0.8 to 12.0 {micro}mol/g dry weight. The spiked sediments were transferred to 4-L plastic trays, returned to the bottom of the pond, and sampled on five dates during 1993--1994. Results revealed a pronounced increase in AVS concentration with increasing zinc concentration. Acid-volatile sulfide concentrations in zinc-spiked sediments displayed only minor seasonal variation but were lowest in surficial (0--2 cm) sediments. Acid-volatile sulfide concentrations always exceeded SEM concentrations at {le}6.0 {micro}mol SEM/g; only at 12.0 {micro}mol SEM/g did SEM/AVS ratios exceed 1.0. Zinc was rarely detected in pore water at any treatment and never at concentrations which should have posed a hazard to benthic macroinvertebrates. No substantial effect on colonization of zinc-spiked sediments by benthic macroinvertebrates was observed. Only oligochaetes (Naididae) were significantly reduced in abundance at the high zinc treatment, although reductions were occasionally evident for other taxa. Lack of noteworthy pore-water zinc concentrations and lack of associated, ecologically meaningful effects were attributed to the increase in AVS levels observed with increasing SEM zinc sediment concentration. The increases in AVS theoretically resulted from a replacement of natural iron and manganese sulfides with the more stable zinc sulfide complex.

  6. Influence of acid volatile sulfides and metal concentrations on metal partitioning in contaminated sediments

    USGS Publications Warehouse

    Lee, J.-S.; Lee, B.-G.; Luoma, S.N.; Choi, H.J.; Koh, C.-H.; Brown, C.L.

    2000-01-01

    The influence of acid volatile sulfide (AVS) on the partitioning of Cd, Ni, and Zn in porewater (PW) and sediment as reactive metals (SEM, simultaneously extracted metals) was investigated in laboratory microcosms. Two spiking procedures were compared, and the effects of vertical geochemical gradients and infaunal activity were evaluated. Sediments were spiked with a Cd-Ni-Zn mixture (0.06, 3, 7.5 ??mol/g, respectively) containing four levels of AVS (0.5, 7.5, 15, 35 ??mol/g). The results were compared to sediments spiked with four levels of Cd-Ni-Zn mixtures at one AVS concentration (7.5 ??mol/g). A vertical redox gradient was generated in each treatment by an 18-d incubation with an oxidized water column. [AVS] in the surface sediments decreased by 65-95% due to oxidation during incubation; initial [AVS] was maintained at 0.5-7.5 cm depth. PW metal concentrations were correlated with [SEM - AVS] among all data. But PW metal concentrations were variable, causing the distribution coefficient, Kd(pw) (the ratio of [SEM] to PW metal concentrations) to vary by 2-3 orders of magnitude at a given [SEM - AVS]. One reason for the variability was that vertical profiles in PW metal concentrations appeared to be influenced by diffusion as well as [SEM - AVS]. The presence of animals appeared to enhance the diffusion of at least Zn. The generalization that PW metal concentrations are controlled by [SEM - AVS] is subject to some important qualifications if vertical gradients are complicated, metal concentrations vary, or equilibration times differ.The influence of acid volatile sulfide (AVS) on the partitioning of Cd, Ni, and Zn in porewater (PW) and sediment as reactive metals (SEM, simultaneously extracted metals) was investigated in laboratory microcosms. Two spiking procedures were compared, and the effects of vertical geochemical gradients and infaunal activity were evaluated. Sediments were spiked with a Cd-Ni-Zn mixture (0.06, 3, 7.5 ??mol/g, respectively) containing

  7. Short-term endproducts of sulfate reduction in a salt marsh: Formation of acid volatile sulfides, elemental sulfur, and pyrite

    NASA Astrophysics Data System (ADS)

    King, Gary M.; Howes, B. L.; Dacey, J. W. H.

    1985-07-01

    Rates of sulfate reduction, oxygen uptake and carbon dioxide production in sediments from a short Spartina alterniflora zone of Great Sippewissett Marsh were measured simultaneously during late summer. Surface sediments (0-2 cm) were dominated by aerobic metabolism which accounted for about 45% of the total carbon dioxide production over 0-15 cm. Rates of sulfate reduction agreed well with rates of total carbon dioxide production below 2 cm depth indicating that sulfate reduction was the primary pathway for sub-surface carbon metabolism. Sulfate reduction rates were determined using a radiotracer technique coupled with a chromous chloride digestion and carbon disulfide extraction of the sediment to determine the extent of formation of radiolabelled elemental sulfur and pyrite during shortterm (48 hr) incubations. In the surface 10 cm of the marsh sediments investigated, about 50% of the reduced radiosulfur was recovered as dissolved or acid volatile sulfides, 37% as carbon disulfide extractable sulfur, and only about 13% was recovered in a fraction operationally defined as pyrite. Correlations between the extent of sulfate depletion in the marsh sediments and the concentrations of dissolved and acid volatile sulfides supported the results of the radiotracer work. Our data suggest that sulfides and elemental sulfur may be major short-term end-products of sulfate reduction in salt marshes.

  8. Influence of acid volatile sulfide and metal concentrations on metal bioavailability to marine invertebrates in contaminated sediments

    USGS Publications Warehouse

    Lee, B.-G.; Lee, J.-S.; Luoma, S.N.; Choi, H.J.; Koh, C.-H.

    2000-01-01

    An 18-day microcosm study was conducted to evaluate the influence of acid volatile sulfides (AVS) and metal additions on bioaccumulation from sediments of Cd, Ni, and Zn in two clams (Macoma balthica and Potamocorbula amurensis) and three marine polychaetes (Neanthes arenaceodentata, Heteromastus filiformis, and Spiophanes missionensis). Manipulation of AVS by oxidation of naturally anoxic sediments allowed use of metal concentrations typical of nature and evaluation of processes important to chronic metal exposure. A vertical sediment column similar to that often found in nature was used to facilitate realistic biological behavior. Results showed that AVS or porewater (PW) metals controlled bioaccumulation in only 2 of 15 metal-animal combinations. Bioaccumulation of all three metals by the bivalves was related significantly to metal concentrations extracted from sediments (SEM) but not to [SEM - AVS] or PW metals. SEM predominantly influenced bioaccumulation of Ni and Zn in N. arenaceodentata, but Cd bioaccumulation followed PW Cd concentrations. SEM controlled tissue concentrations of all three metals in H. filiformis and S. missionensis, with minor influences from metal-sulfide chemistry. Significant bioaccumulation occurred when SEM was only a small fraction of AVS in several treatments. Three factors appeared to contribute to the differences between these bioaccumulation results and the results from toxicity tests reported previously: differences in experimental design, dietary uptake, and biological attributes of the species, including mode and depth of feeding.An 18-day microcosm study was conducted to evaluate the influence of acid volatile sulfides (AVS) and metal additions on bioaccumulation from sediments of Cd, Ni, and Zn in two clams (Macoma balthica and Potamocorbula amurensis) and three marine polychaetes (Neanthes arenaceodentata, Heteromastus filiformis, and Spiophanes missionensis). Manipulation of AVS by oxidation of naturally anoxic sediments

  9. Effects of acid-volatile sulfide on metal bioavailability and toxicity to midge (Chironomus tentans) larvae in black shale sediments.

    PubMed

    Ogendi, George M; Brumbaugh, William G; Hannigan, Robyn E; Farris, Jerry L

    2007-02-01

    Metal bioavailability and toxicity to aquatic organisms are greatly affected by variables such as pH, hardness, organic matter, and sediment acid-volatile sulfide (AVS). Sediment AVS, which reduces metal bioavailability and toxicity by binding and immobilizing metals as insoluble sulfides, has been studied intensely in recent years. Few studies, however, have determined the spatial variability of AVS and its interaction with simultaneously extracted metals (SEM) in sediments containing elevated concentrations of metals resulting from natural geochemical processes, such as weathering of black shales. We collected four sediment samples from each of four headwater bedrock streams in northcentral Arkansa (USA; three black shale-draining streams and one limestone-draining stream). We conducted 10-d acute whole-sediment toxicity tests using the midge Chironomus tentans and performed analyses for AVS, total metals, SEMs, and organic carbon. Most of the sediments from shale-draining streams had similar total metal and SEM concentrations but considerable differences in organic carbon and AVS. Zinc was the leading contributor to the SEM molar sum, averaging between 68 and 74%, whereas lead and cadmium contributed less than 3%. The AVS concentration was very low in all but two samples from one of the shale streams, and the sum of the SEM concentrations was in molar excess of AVS for all shale stream sediments. No significant differences in mean AVS concentrations between sediments collected from shale-draining or limestone-draining sites were noted (p > 0.05). Midge survival and growth in black shale-derived sediments were significantly less (p < 0.001) than that of limestone-derived sediments. On the whole, either SEM alone or SEM-AVS explained the total variation in midge survival and growth about equally well. However, survival and growth were significantly greater (p < 0.05) in the two sediment samples that contained measurable AVS compared with the two sediments from the

  10. Effects of acid-volatile sulfide on metal bioavailability and toxicity to midge (Chironomus tentans) larvae in black shale sediments

    USGS Publications Warehouse

    Ogendi, G.M.; Brumbaugh, W.G.; Hannigan, R.E.; Farris, J.L.

    2007-01-01

    Metal bioavailability and toxicity to aquatic organisms are greatly affected by variables such as pH, hardness, organic matter, and sediment acid-volatile sulfide (AVS). Sediment AVS, which reduces metal bioavailability and toxicity by binding and immobilizing metals as insoluble sulfides, has been studied intensely in recent years. Few studies, however, have determined the spatial variability of AVS and its interaction with simultaneously extracted metals (SEM) in sediments containing elevated concentrations of metals resulting from natural geochemical processes, such as weathering of black shales. We collected four sediment samples from each of four headwater bedrock streams in northcentral Arkansa (USA; three black shale-draining streams and one limestone-draining stream). We conducted 10-d acute whole-sediment toxicity tests using the midge Chironomus tentans and performed analyses for AVS, total metals, SEMs, and organic carbon. Most of the sediments from shale-draining streams had similar total metal and SEM concentrations but considerable differences in organic carbon and AVS. Zinc was the leading contributor to the SEM molar sum, averaging between 68 and 74%, whereas lead and cadmium contributed less than 3%. The AVS concentration was very low in all but two samples from one of the shale streams, and the sum of the SEM concentrations was in molar excess of AVS for all shale stream sediments. No significant differences in mean AVS concentrations between sediments collected from shale-draining or limestone-draining sites were noted (p > 0.05). Midge survival and growth in black shale-derived sediments were significantly less (p < 0.001) than that of limestone-derived sediments. On the whole, either SEM alone or SEM-AVS explained the total variation in midge survival and growth about equally well. However, survival and growth were significantly greater (p < 0.05) in the two sediment samples that contained measurable AVS compared with the two sediments from the

  11. Evaluation of metal/acid-volatile sulfide relationships in the prediction of metal bioaccumulation by benthic macroinvertebrates

    SciTech Connect

    Ankley, G.T.

    1996-12-01

    Recent studies have demonstrated that the toxicity of divalent cationic metals (cadmium, copper, lead, nickel, and zinc) in sediments can be controlled through binding to acid-volatile sulfide (AVS). When the molar concentration of AVS exceeds that of the metals (i.e., the metal/AVS ratio is less than unity), they exist predominantly as insoluble metal sulfides, which presumably are not biologically available. Thus, at metal/AVS ratios less than 1, toxicity of sediment-associated metals to benthic macro-invertebrates has not been observed. However, bioaccumulation may provide a more direct assessment of contaminant bioavailability than the presence or absence of toxicity. The purpose of this report is to comprehensively review available literature on metal bioaccumulation versus sediment metal/AVS relationships to further examine the tenet that AVS controls metal bioavailability. In all, 12 studies were evaluated; these ranged from short-term (10-d) laboratory experiments with metal-spiked or field-collected sediments containing cadmium, copper, lead, nickel, and/or zinc to long-term (> 1-year) field studies with sediments spiked with cadmium or zinc. Test organisms included mollusks, oligochaetes, polychaetes, amphipods, and midges. The preponderance of studies indicated reduced accumulation of metals at sediment metal/AVS ratios of less than 1. However, there were exceptions to this general observation, two of which occurred in short-term laboratory experiments with cadmium- or nickel-spiked sediments. In these studies there appeared to be a linear accumulation of metals with increasing sediment metal concentrations irrespective of the metal/AVS ratio. Although there is experimental evidence suggesting that significant bioaccumulation of metals does not occur when there is sufficient AVS available to bind them, the existence of data to the contrary indicates the need for further research into factors controlling the bioaccumulation of metals from sediments.

  12. Do acid volatile sulfides (AVS) influence the accumulation of sediment-bound metals to benthic invertebrates under natural field conditions?

    PubMed

    De Jonge, Maarten; Dreesen, Freja; De Paepe, Josefina; Blust, Ronny; Bervoets, Lieven

    2009-06-15

    The present study evaluates the influence of acid volatile sulfides (AVS) on accumulation of sediment-bound metals in benthic invertebrates under natural field conditions. Natural sediments, pore water, surface water, and two species of widespread benthic invertebrates (Chironomus gr. thummi and Tubifex tubifex) were collected from 17 historical polluted Flemish lowland rivers and measured for metal concentrations. Different sediment characteristics were determined (AVS, organic matter, clay content) and multiple regression was used to study their relationship with accumulated metals in the invertebrates. Physical and chemical analysis of the field samples indicated low metal concentrations in the water and pore water, but very high metal concentrations in the sediment and the invertebrates, especially for Pb (5.99 micromol/ g). In general, metal accumulation in chironomids and tubificid worms was most strongly correlated with total metal concentrations in the sediment and sediment metal concentrations normalized for organic matter and clay content. Following the results of the linear regression model, AVS did not turn out to be a significant variable in describing variation in metal accumulation. Our study clearly demonstrates that, in addition to the results gained from experiments under lab conditions, benthic invertebrates can accumulate metals from unspiked field sediments even when there's an excess of AVS. PMID:19603670

  13. Predicting the toxicity of sediment-associated trace metals with simultaneously extracted trace metal: Acid-volatile sulfide concentrations and dry weight-normalized concentrations: A critical comparison

    USGS Publications Warehouse

    Long, E.R.; MacDonald, D.D.; Cubbage, J.C.; Ingersoll, C.G.

    1998-01-01

    The relative abilities of sediment concentrations of simultaneously extracted trace metal: acid-volatile sulfide (SEM:AVS) and dry weight- normalized trace metals to correctly predict both toxicity and nontoxicity were compared by analysis of 77 field-collected samples. Relative to the SEM:AVS concentrations, sediment guidelines based upon dry weight-normalized concentrations were equally or slightly more accurate in predicting both nontoxic and toxic results in laboratory tests.

  14. Predicting the toxicity of metal-contaminated field sediments using interstitial concentration of metals and acid-volatile sulfide normalizations

    SciTech Connect

    Hansen, D.J.; Berry, W.J.; Mahony, J.D.

    1996-12-01

    The authors investigated the utility of interstitial water concentrations of metals and simultaneously extracted metal/acid-volatile sulfide (SEM/AVS) ratios to explain the biological availability of sediment-associated divalent metals to benthic organisms exposed in the laboratory to sediments from five saltwater and four freshwater locations in the US, Canada, and China. The amphipod Ampelisca abdita or the polychaete Neanthes arenaceodentata were exposed to 70 sediments from the five saltwater locations, and the amphipod Hyalella azteca or the oligochaete Lumbriculus variegatus were exposed to 55 sediments from four freshwater locations in 10-d lethality tests. Almost complete absence of toxicity in spiked sediments and field sediments where metals were the only known source of contamination and where interstitial water toxic units (IWTUs) were < 0.5 indicates that toxicity associated with sediments having SEM/AVS ratios < 1.0 from two saltwater locations in industrial harbors was not metals-related as these sediments contained <0.5 IWTU. Metals-associated toxicity was absent in 100% of sediments from the remaining three saltwater field locations, where metals were the only known source of contamination and SEM/AVS ratios were {le} 1.0. Two-thirds of 45 sediments from seven saltwater and freshwater field locations having both IWTUs > 0.5 (55%) were used alone. The difference between the molar concentrations of SEM and AVS (SEM-AVS) can provide important insight into the extent of additional available binding capacity, the magnitude by which AVS binding has been exceeded, and, when organism response is considered, the potential magnitude of importance of other metal binding phases. SEM-AVS should be used instead of SEM/AVS ratios as a measure of metals availability. In published experiments with both metal-spiked and field sediments, SEM-AVS and IWTUs accurately identified absence of sediment toxicity and with less accuracy identified the presence of toxicity.

  15. Precipitation of Zn(II), Cu(II) and Pb(II) at bench-scale using biogenic hydrogen sulfide from the utilization of volatile fatty acids.

    PubMed

    Alvarez, Maria Teresa; Crespo, Carla; Mattiasson, Bo

    2007-01-01

    Biological production of hydrogen sulfide (H(2)S) using sulfate-reducing bacteria (SRB) has important potential within environmental biotechnology. The aim of this work was to study the possibility of using SRB for the treatment of an acid mine drainage (AMD) at bench-scale. This process involved three stages: the optimization of H(2)S production through the utilization of total volatile fatty acids (TVFAs) by SRB, the establishment of a biofilm reactor for sulfide production, and the precipitation of metals by using the biologically produced H(2)S. The substrates used for TVFAs production consisted of papaya, apple and banana. The H(2)S produced from the degradation of TVFAs was utilized for the precipitation of a metal-contaminated effluent collected from Bolivar mine (Oruro, Bolivia). The maximum concentration of H(2)S obtained was approximately 16mM. Removal efficiencies of ca. 100% for copper, above 94% for zinc, and above 92% for lead were achieved. PMID:16979215

  16. Chronic effect of cadmium in sediments on colonization by benthic marine organisms: An evaluation of the role of interstitial cadmium and acid-volatile sulfide in biological availability

    SciTech Connect

    Hansen, D.J.; Berry, W.J.; Benyi, S.J.; Mahony, J.D.; Corbin, J.M.; Pratt, S.D.; Toro, D.M. di |; Abel, M.B.

    1996-12-01

    The role of interstitial cadmium and acid-volatile sulfide (AVS) in controlling the bioavailability of sediment-associated metal was examined using the chronic saltwater benthic colonization test. Sediments were spiked to achieve nominal cadmium/AVS molar ratios of 0.0 (control), 0.1, 0.8, and 3.0 in this 118-d test. Oxidation of AVS in the surficial 2.4 cm within 2 to 4 weeks resulted in sulfide profiles similar to those occurring naturally in local sediments. In the nominal 0.1 cadmium/AVS treatment measured simultaneously extracted metal (SEM{sub Cd}) was always less than AVS. Interstitial cadmium concentrations were less than those likely to cause biological effects. No significant biological effects were detected. In the nominal 0.8 cadmium/AVS treatment, measured SEM{sub Cd} commonly exceeded AVS in the surficial 2.4 cm of sediment. Interstitial cadmium concentrations were of likely toxicological significance to highly sensitive species. Shifts in the presence or absence over all taxa, and fewer macrobenthic polychaetes (Mediomastus ambiseta, Streblospio benedicti, and Podarke obscurea) and unidentified meiofaunal nematodes, were observed. In the nominal 3.0 cadmium/AVS treatment, concentrations of SEM{sub Cd} were always greater than AVS throughout the sediment column. Interstitial cadmium ranged from 28,000 to 174,000 {micro}g/L. In addition to the effects above, the sediments were colonized by fewer macrobenthic species, polychaete species, and harpacticoids; had lower densities of diatoms; lacked bivalve molluscs; and exhibited other impacts. Over all treatments, the observed biological responses were consistent with SEM{sub Cd}/AVS ratios in surficial sediments and interstitial water cadmium concentrations.

  17. Effect of cadmium in sediments on colonization by benthic marine organisms: Role of interstitial cadmium and acid volatile sulfide in bioavailability

    SciTech Connect

    Hansen, D.; Berry, W.; Benyi, S.; Mahony, J.; Corbin, J.; Pratt, S.; Able, M.

    1995-12-31

    The role of interstitial cadmium and acid volatile sulfide (AVS) in controlling the bioavailability of sediment-associated metal was examined using the chronic saltwater benthic colonization test. Sediments were spiked with cadmium to achieve simultaneously extracted metal (SEM)/AVS molar ratios of 0. 0 (control), 0.1, 0.8 and 3.0 in this 118-day test. Oxidation of AVS in the surficial 2.4 cm within two to four weeks resulted in sulfide profiles similar to those occurring naturally in local sediments. In the nominal 0.1 SEM/AVS treatment, measured SEM was always less than AVS. Interstitial cadmium concentrations (< 3--10 {micro}g/L) were below those likely to cause biological effects. No significant biological effects were detected. In the nominal 0.8 SEM/AVS treatment, measured SEM commonly exceeded AVS in the surficial 2.4 cm of sediment. Interstitial cadmium concentrations (24--157 {micro}g/L) were likely of toxicological significance to sensitive species. Shifts were observed in presence/absence of species, and there were fewer macrobenthic polychaetes (Mediomastus ambiseta, Strebloapio benedicti and Podarke obscura) and unidentified meiofaunal nematodes. In the nominal 3.0 SEM/AVS treatment, concentrations of SEM were always greater than AVS throughout the sediment column. Interstitial cadmium ranged from 28,000 to 174,000 {micro}g/L. In addition to the effects above, these sediments were colonized by fewer macrobenthic species, polychaete species and harpacticoids; had lower densities of diatoms; lacked bivalve molluscs and exhibited other impacts. The observed biological responses were consistent with measured SEM/AVS ratios in surficial sediments and interstitial water cadmium concentrations, further supporting their utility in predicting metals bioavailability.

  18. The role of acid-volatile sulfide and interstitial water metal concentrations in determining bioavailability of cadmium and nickel from contaminated sediments to the marine polychaete Neanthes arenaceodentata

    SciTech Connect

    Pesch, C.E.; Hansen, D.J.; Boothman, W.S. . Environmental Research Lab.); Berry, W.J. ); Mahony, J.D. . Chemistry Dept.)

    1995-01-01

    This study investigated the influence of acid-volatile sulfide (AVS) and interstitial water (IW) metal concentrations on bioavailability and toxicity of Cd and Ni to an infaunal sediment-ingesting marine worm, Neanthes Arenaceodentata. Ten-d exposures were conducted with sediments, contaminated primarily with Cd and Ni, from Foundry Cove (Hudson River, NY), and with uncontaminated sediments spiked with Cd or Ni. Molar ratios of simultaneously extracted metal (SEM)/AVS ranged from < 0.02 to 44 for Cd-spiked, 0.02 to 241 for Ni-spiked, and <0.06 to 125 for Foundry Cove sediments. In all experiments, significant mortality was not observed when SEM/AVS ratios were <1.0 and interstitial water toxic units (IWTU) were <1.0. In the Cd and Ni-spiked experiments, when SEM/AVS ratios or IWTUs were >1.0, sediments were either lethal or worms did not burrow. Mortality of worms in Foundry Cove sediments was [le] 20%, and worms burrowed in all these sediments. However, IW contained <1.0 TU (Ni + Cd) in all Foundry Cove sediments except one (IWTU = 1.69). Metal concentrations in worms generally increased with increases in sediment metal concentration, SEM/AVS molar ratio, and IW metal concentration. The presence of metal in worms from sediments from SEM/AVS ratios <1.0 may be evidence of release of Cd or Ni from oxidized metal sulfide (a result of burrowing), uptake of metal from ingested sediment, or adsorption to body surfaces. These results support the hypothesis that when the concentration of AVS in sediments exceeds that of divalent metals sediments will not be acutely toxic. However, a greater number of sediments was correctly predicted to be nontoxic when interstitial water metal concentration of <1.0 TU was used.

  19. Bioavailability assessment of toxic metals using the technique "acid-volatile sulfide (AVS)-simultaneously extracted metals (SEM)" in marine sediments collected in Todos os Santos Bay, Brazil.

    PubMed

    Silva, Jucelino B; Nascimento, Rodrigo A; de Oliva, Sergio T; de Oliveira, Olívia M C; Ferreira, Sergio L C

    2015-10-01

    This paper reports the bioavailability of the metals (cadmium, copper, zinc, lead, and nickel) in sediment samples collected in seven stations from the São Paulo Estuary, Todos os Santos Bay, Brazil. The bioavailability was determined by employing the technique "acid-volatile sulfide (AVS) and simultaneously extracted metal (SEM)". The elements cadmium, copper, lead, and zinc were determined using differential pulse anodic stripping voltammetry (DPASV), while nickel was quantified utilizing electrothermal atomic absorption spectrometry (ET AAS). The accuracy of these methods was confirmed using a certified reference material of estuarine sediment (NIST 1646). The sulfide was quantified using potentiometry with selective electrode and the organic matter determination employing an indirect volumetric method using potassium dichromate and iron(II) sulfate solutions. The bioavailability of the metals was estimated by relationship between the concentration of AVS and the sum of the concentrations of the simultaneously extracted metals (ΣSEM), considering a significant toxicity when (ΣSEM)/(AVS) is higher than 1. The bioavailability values in the seven stations studied varied from 0.93 to 1.31 (June, 2014) and from 0.34 to 0.58 (September, 2014). These results demonstrated a critical condition of toxicity (bioavailability >1) in six of the seven sediment samples collected during the rainy season (June, 2014). In the other period (September, 2014), the bioavailability was always lower than 1 for all sediment samples collected in the seven stations. The individual values of the concentrations of the five metals were compared with the parameters PEL (probable effects level) and TEL (threshold effects level), which are commonly employed for characterization of ecological risk in environmental systems. This comparison revealed that all metals have concentrations lower than the PEL and only zinc and lead in some stations have contents higher than the TEL. The

  20. Effects of spatial and temporal variation of acid-volatile sulfide on the bioavailability of copper and zinc in freshwater sediments

    SciTech Connect

    Besser, J.M.; Ingersoll, C.G.; Giesy, J.P.

    1996-03-01

    Variation in concentrations of acid-volatile sulfide (AVS) in sediments from the upper Clark Fork River of Montana, USA, was associated with differences in bioaccumulation of Cu and Zn and growth of larvae of the midge, Chironomus tentans. Growth of midge larvae was significantly greater and bioaccumulation of Cu was significantly less in surface sections (0--3 cm depth) of sediment cores, which had greater concentrations of AVS and lesser ratios of simultaneously extracted metals to AVS (SEM:AVS ratios) than in subsurface sediments (6--9 cm). Concentrations of AVS were significantly less in sediments incubated with oxic overlying water for 9 weeks than in the same sediments incubated under anoxic conditions. Bioaccumulation of Cu differed significantly between incubation treatments, corresponding to differences in concentrations of AVS and SEM:AVS ratios, although midge growth did not. Bioaccumulation of Zn did not differ significantly between depth strata of sediment cores or between incubation treatments. When results from the two sets of bioassays were combined, bioaccumulation of Cu and Zn, but not growth, was significantly correlated with SEM:AVS ratios and other estimates of bioavailable metal fractions in sediments. Growth of midge larvae was significantly correlated with bioaccumulation of Zn, but not Cu, suggesting that Zn was the greater contributor to the toxicity of these sediments. Assessments of the toxicity of metal-contaminated freshwater sediments should consider the effects of spatial and temporal variation in AVS concentrations on metal bioavailability.

  1. The utility of acid volatile sulfide and simultaneously extracted metals concentrations as an indicator of metal bioavailability and toxicity in estuarine sediments

    SciTech Connect

    Summers, K.; Windom, H.; Weisberg, S.

    1995-12-31

    As part of the Environmental Monitoring and Assessment Program, surficial sediment samples (upper 2 cm) were collected from over 1,000 estuarine sites along the Mid-Atlantic and Gulf of Mexico coastlines from 1990--1994. In addition, sediment samples from approximately 30 sites within the New York/New Jersey Harbor complex were collected in 1993. Acid volatile sulfide concentrations (AVS), simultaneously extracted metals (SEM), sediment toxicity bioassays, and benthic community compositions were determined for each of these sites. The present effort examined the hypotheses that: (1) the ratio of AVS to SEM is an indicator of metal availability and sediment toxicity and (2) that correction of other sources of mortality (organic contamination, narcosis, hypoxia, etc.) further strengthens this ratio relationship. Examination of highly metal contaminated sites in the New York/New Jersey harbor area, selected metal contaminated regions in the Mid-Atlantic and Gulf estuaries, as well as reference regions (uncontaminated zones) did not support these hypotheses. In fact, significant/or benthic community composition shifts that could not be attributed to other sources were observed in regions characterized by the alternate hypothesis. Normalized metal concentrations based on available aluminum appeared to be more closely related indicator of observed toxicity of benthic community attributes than AVS ratios.

  2. Volatile Organic Sulfur Compounds of Environmental Interest: Dimethyl Sulfide and Methanethiol

    ERIC Educational Resources Information Center

    Chasteen, Thomas G.; Bentley, Ronald

    2004-01-01

    Volatile organic sulfur compounds (VOSCs) have been assigned environmental roles in global warming, acid precipitation, and cloud formation where two important members dimethyl sulfide (CH3)2 S, DMS, and methanethiol, CH3SH, MT, of VOSC group are involved.

  3. Sulfur K-edge XANES and acid volatile sulfide analyses of changes in chemical speciation of S and Fe during sequential extraction of trace metals in anoxic sludge from biogas reactors.

    PubMed

    Shakeri Yekta, Sepehr; Gustavsson, Jenny; Svensson, Bo H; Skyllberg, Ulf

    2012-01-30

    The effect of sequential extraction of trace metals on sulfur (S) speciation in anoxic sludge samples from two lab-scale biogas reactors augmented with Fe was investigated. Analyses of sulfur K-edge X-ray absorption near edge structure (S XANES) spectroscopy and acid volatile sulfide (AVS) were conducted on the residues from each step of the sequential extraction. The S speciation in sludge samples after AVS analysis was also determined by S XANES. Sulfur was mainly present as FeS (≈ 60% of total S) and reduced organic S (≈ 30% of total S), such as organic sulfide and thiol groups, in the anoxic solid phase. Sulfur XANES and AVS analyses showed that during first step of the extraction procedure (the removal of exchangeable cations), a part of the FeS fraction corresponding to 20% of total S was transformed to zero-valent S, whereas Fe was not released into the solution during this transformation. After the last extraction step (organic/sulfide fraction) a secondary Fe phase was formed. The change in chemical speciation of S and Fe occurring during sequential extraction procedure suggests indirect effects on trace metals associated to the FeS fraction that may lead to incorrect results. Furthermore, by S XANES it was verified that the AVS analysis effectively removed the FeS fraction. The present results identified critical limitations for the application of sequential extraction for trace metal speciation analysis outside the framework for which the methods were developed. PMID:22284519

  4. Assessment of sediment quality in two important areas of mariculture in the Bohai Sea and the northern Yellow Sea based on acid-volatile sulfide and simultaneously extracted metal results.

    PubMed

    Gao, Xuelu; Li, Peimiao; Chen, Chen-Tung Arthur

    2013-07-15

    The surface sediments from Laizhou Bay (LB) and the coastal sea around Zhangzi Island (ZI) were analyzed for acid-volatile sulfide (AVS) and simultaneously extracted metals (SEMs) to assess the sediment quality. These two areas, especially LB, are important mariculture bases in China and are significantly affected by the Yellow River. The concentrations of AVS ([AVS]) and SEM ([SEM]) varied in the ranges 0.71-11.03 and 0.10-0.74 μmol g(-1) dry weight, respectively. [AVS] was generally low in the river outlet area and increased in the seaward direction in LB. [AVS] was significantly and positively correlated with TOC. [SEM] was significantly and positively correlated with TOC, the water content of sediment and the fine sediment fraction and it was significantly and negatively correlated with coarse sediment fraction. The obtained results suggest that the surface sediments of LB and ZI were of high quality and not likely to cause negative effects on their ecosystems. PMID:23465622

  5. Acid Volatile Sulfides (avs) and the Bioavailability of Trace Metals in the Channel of the SÃO Francisco River, Sepetiba Bay - de Janeiro-Brazil

    NASA Astrophysics Data System (ADS)

    Monte, Christiane; Rodrigues, Ana Paula; Marinho, Matheus; Quaresma, Tássia; Machado, Wilson

    2014-05-01

    Sepetiba Bay has 430 Km2 of internal and 2,500 Km2 area of the drainage basin (Lacerda et al., 2007), located 60 km west of the city of Rio de Janeiro. Sepetiba Bay has 430 Km2 of internal and 2,500 Km2 area of the drainage basin (Lacerda et al., 2007), located 60 km west of the city of Rio de Janeiro.The San Francisco channel comes from the Guandu River and empties into Sepetiba Bay and is the main contributor of freshwater to the estuarine system. The Guandu River system/channel of San Francisco receives contribution of domestic and industrial effluents, which go largely to Sepetiba Bay. This work aimed to evaluate the .This work aimed to evaluate the ratio SEM/AVS as a way of predicting bioavailability trace metals from industrial sewage, mainly, in the estuarine system of Sepetiba. This model is based on the property of some Divalent metal cations (Cd, Cu, Ni, Pb and Zn), by presenting a low solubility constant, are removed from the soluble fraction by precipitation, forming secondary metal sulfides. Were held four transects, made up of three points each, the coast line to the center of the Bay. The surface sediment was collected with a van Veen sampler type ,packed in glass jars and kept frozen until analysis.The determination of SEM/AVS followed the methodology described by Allen et al. (1991). The variation between sulfide 159.88 ± 0.05 µmol/g on 12 points. The metals that entered the sum of simultaneous extraction were: Cd, Cu, Ni, Pb and Zn ranging from: 6.47 ± 0.11 µmol/g on sum.The means (± standard deviation) ratio SEM/AVS per transect were: 1.04 ± 1.20 (transect 1); 0.48 ± 0.53 (transect 2); 1.26 ± 1.32 (transect 3) and 0.18 ± 0.14 (transect 4). Only transects 1 and 3 had higher results than 1 , meaning that there are more divalent metal sulfides in the environment. This means that only the sulfides would not be capable of complex and may reflect the potential bioavailability of these in the aquatic environment. There is no statistical

  6. Use of hydrochloric acid for determinining solid-phase arsenic partitioning in sulfidic sediments.

    PubMed

    Wilkin, Richard T; Ford, Robert G

    2002-11-15

    We examined the use of room-temperature hydrochloric acid (1-6 M) and salt solutions of magnesium chloride, sodium carbonate, and sodium sulfide for the removal of arsenic from synthetic iron monosulfides and contaminated sediments containing acid-volatile sulfides (AVS). Results indicate that acid-soluble arsenic reacts with H2S released from AVS phases and precipitates at low pH as disordered orpiment or alacranite. Arsenic sulfide precipitation is consistent with geochemical modeling in that conditions during acid extraction are predicted to be oversaturated with respect to orpiment, realgar, or both. Binding of arsenic with sulfide at low pH is sufficiently strong that 6 M HCl will not keep spiked arsenic in the dissolved fraction. Over a wide range of AVS concentrations and molar [As]/[AVS] ratios, acid extraction of arsenic from sulfide-bearing sediments will give biased results that overestimate the stability or underestimate the bioavailability of sediment-bound arsenic. Alkaline solutions of sodium sulfide and sodium carbonate are efficient in removing arsenic from arsenic sulfides and mixed iron-arsenic sulfides because of the high solubility of arsenic at alkaline pH, the formation of stable arsenic complexes with sulfide or carbonate, or both. PMID:12487318

  7. Volatile Organic Sulfur Compounds of Environmental Interest: Dimethyl Sulfide and Methanethiol. An Introductory Overview

    NASA Astrophysics Data System (ADS)

    Chasteen, Thomas G.; Bentley, Ronald

    2004-10-01

    Volatile organic sulfur compounds and their degradation products play important environmental roles in global warming, acid precipitation, and cloud formation. Two important members of this group, dimethyl sulfide, DMS, and methanethiol, MT, are formed by living organisms as well as by abiotic processes. DMS is synthesized by various organisms in the marine environment and large quantities of it are released to the atmosphere. One key precursor for DMS synthesis is the sulfonium salt, dimethylsulfoniopropionate. MT, also formed in marine environments, can be further converted to DMS. The chemical reactions responsible for the biosynthesis of DMS and MT are emphasized here, as well as means for their degradation. Since sulfur compounds are often ignored in normal course work, this article provides a basic foundation for an understanding of these interesting and environmentally significant compounds.

  8. 'Low-acid' sulfide oxidation using nitrate-enriched groundwater

    NASA Astrophysics Data System (ADS)

    Donn, Michael; Boxall, Naomi; Reid, Nathan; Meakin, Rebecca; Gray, David; Kaksonen, Anna; Robson, Thomas; Shiers, Denis

    2016-04-01

    Acid drainage (AMD/ARD) is undoubtedly one of the largest environmental, legislative and economic challenges facing the mining industry. In Australia alone, at least 60m is spent on AMD related issues annually, and the global cost is estimated to be in the order of tens of billions US. Furthermore, the challenge of safely and economically storing or treating sulfidic wastes will likely intensify because of the trend towards larger mines that process increasingly higher volumes of lower grade ores and the associated sulfidic wastes and lower profit margins. While the challenge of managing potentially acid forming (PAF) wastes will likely intensify, the industrial approaches to preventing acid production or ameliorating the effects has stagnated for decades. Conventionally, PAF waste is segregated and encapsulated in non-PAF tips to limit access to atmospheric oxygen. Two key limitations of the 'cap and cover' approach are: 1) the hazard (PAF) is not actually removed; only the pollutant linkage is severed; and, 2) these engineered structures are susceptible to physical failure in short-to-medium term, potentially re-establishing that pollutant linkage. In an effort to address these concerns, CSIRO is investigating a passive, 'low-acid' oxidation mechanism for sulfide treatment, which can potentially produce one quarter as much acidity compared with pyrite oxidation under atmospheric oxygen. This 'low-acid' mechanism relies on nitrate, rather than oxygen, as the primary electron accepter and the activity of specifically cultured chemolithoautotrophic bacteria and archaea communities. This research was prompted by the observation that, in deeply weathered terrains of Australia, shallow (oxic to sub-oxic) groundwater contacting weathering sulfides are commonly inconsistent with the geochemical conditions produced by ARD. One key characteristic of these aquifers is the natural abundance of nitrate on a regional scale, which becomes depleted around the sulfide bodies, and

  9. Hypochlorous Acid Leaching of Sulfide Minerals

    NASA Astrophysics Data System (ADS)

    Cho, Eung Ha

    1987-01-01

    The leaching mechanisms of chalcopyrite, sphalerite, and chalcocite with hypochlorous acid have been resolved by analyzing the concentrations of the products of the leaching reactions and also by determining the effects of pH on the leaching rate. Chalcopyrite and sphalerite give rise to sulfur and sulfate as the primary products and the leaching rates are pH independent. However, chalcocite gives rise to only sulfur as the primary product, and the leaching rates are pH dependent.

  10. 21 CFR 573.914 - Salts of volatile fatty acids.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 6 2013-04-01 2013-04-01 false Salts of volatile fatty acids. 573.914 Section 573... Food Additive Listing § 573.914 Salts of volatile fatty acids. (a) Identity. The food additive is a blend containing the ammonium or calcium salt of isobutyric acid and the ammonium or calcium salts of...

  11. 21 CFR 573.914 - Salts of volatile fatty acids.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 6 2012-04-01 2012-04-01 false Salts of volatile fatty acids. 573.914 Section 573... Food Additive Listing § 573.914 Salts of volatile fatty acids. (a) Identity. The food additive is a blend containing the ammonium or calcium salt of isobutyric acid and the ammonium or calcium salts of...

  12. Acidic volatiles and the Mars Soil

    NASA Astrophysics Data System (ADS)

    Banin, A.; Han, F. X.; Kan, I.; Cicelsky, A.

    1997-06-01

    Large portions of Mars' surface are covered with deposits of fine, homogeneous, weathered dusty-soil material. Nanophase iron oxides, silicate mineraloids, and salts prevail in the soil. The mode of formation of this somewhat peculiar type of soil is still far from being clear. One scenario suggests that weathering took place during early epochs when Mars may have been ``warm and wet.'' The properties of the soil are not easily reconciled with this scenario. We propose another possible scenario that attributes, in part, the peculiar nature of the Martian dust and soil to a relatively ``young'' weathering product formed during the last few hundreds of millions of years in a process that involves acidic volatiles. We tested this hypothesis in an experimental study of the first step of acidolytic weathering of a partly palagonitized volcanic tephra of hawaiitic lava origin, using sulfuric, hydrochloric and nitric acids and their mixtures. The tephra effectively ``neutralize'' the added acidity. The protonic acidity added to the tephra attacks the primary minerals, releasing Fe, Al, and Mg, which control the pH, acting as Lewis-acid species of varying acid strengths. The full amount of acidity added to the tephra is stored in it, but only a very small fraction is preserved as the original protonic acidity. The majority of the added sulfate and chloride were present as salts and easily solubilized minerals. Well-crystallized sulfate salt minerals of aluminum and calcium were detected by powder X ray diffractometry, whereas secondary magnesium and iron minerals were not detected, due probably to lack of crystallinity. The presence of gypsum (CaSO4.2H2O) and alunogen (Al2(SO4)3.17H2O) is probably responsible for the observed increased hygroscopicity of the acidified tephra and their tendency to form hardened crusts. We suggest that if this mechanism is of importance on Mars, then the chemically weathered component of the Martian soil consists of a salt-rich mineral

  13. 21 CFR 573.914 - Salts of volatile fatty acids.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ...) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS FOOD ADDITIVES PERMITTED IN FEED AND DRINKING WATER OF ANIMALS Food Additive Listing § 573.914 Salts of volatile fatty acids. (a) Identity. The food additive is a... 21 Food and Drugs 6 2011-04-01 2011-04-01 false Salts of volatile fatty acids. 573.914 Section...

  14. 21 CFR 573.914 - Salts of volatile fatty acids.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ...) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS FOOD ADDITIVES PERMITTED IN FEED AND DRINKING WATER OF ANIMALS Food Additive Listing § 573.914 Salts of volatile fatty acids. (a) Identity. The food additive is a... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Salts of volatile fatty acids. 573.914 Section...

  15. Revisiting benzene cluster cations for the chemical ionization of dimethyl sulfide and select volatile organic compounds

    DOE PAGESBeta

    Kim, Michelle J.; Zoerb, Matthew C.; Campbell, Nicole R.; Zimmermann, Kathryn J.; Blomquist, Byron W.; Huebert, Barry J.; Bertram, Timothy H.

    2016-04-05

    Here, benzene cluster cations were revisited as a sensitive and selective reagent ion for the chemical ionization of dimethyl sulfide (DMS) and a select group of volatile organic compounds (VOCs). Laboratory characterization was performed using both a new set of compounds (i.e., DMS, β-caryophyllene) as well as previously studied VOCs (i.e., isoprene, α-pinene). Using a field deployable chemical-ionization time-of-flight mass spectrometer (CI-ToFMS), benzene cluster cations demonstrated high sensitivity (> 1 ncps ppt−1) to DMS, isoprene, and α-pinene standards. Parallel measurements conducted using a chemical-ionization quadrupole mass spectrometer, with a much weaker electric field, demonstrated that ion–molecule reactions likely proceed through a combinationmore » of ligand-switching and direct charge transfer mechanisms. Laboratory tests suggest that benzene cluster cations may be suitable for the selective ionization of sesquiterpenes, where minimal fragmentation (< 25 %) was observed for the detection of β-caryophyllene, a bicyclic sesquiterpene. The in-field stability of benzene cluster cations using CI-ToFMS was examined in the marine boundary layer during the High Wind Gas Exchange Study (HiWinGS). The use of benzene cluster cation chemistry for the selective detection of DMS was validated against an atmospheric pressure ionization mass spectrometer, where measurements from the two instruments were highly correlated (R2 > 0.95, 10 s averages) over a wide range of sampling conditions.« less

  16. Revisiting benzene cluster cations for the chemical ionization of dimethyl sulfide and select volatile organic compounds

    NASA Astrophysics Data System (ADS)

    Kim, Michelle J.; Zoerb, Matthew C.; Campbell, Nicole R.; Zimmermann, Kathryn J.; Blomquist, Byron W.; Huebert, Barry J.; Bertram, Timothy H.

    2016-04-01

    Benzene cluster cations were revisited as a sensitive and selective reagent ion for the chemical ionization of dimethyl sulfide (DMS) and a select group of volatile organic compounds (VOCs). Laboratory characterization was performed using both a new set of compounds (i.e., DMS, β-caryophyllene) as well as previously studied VOCs (i.e., isoprene, α-pinene). Using a field deployable chemical-ionization time-of-flight mass spectrometer (CI-ToFMS), benzene cluster cations demonstrated high sensitivity (> 1 ncps ppt-1) to DMS, isoprene, and α-pinene standards. Parallel measurements conducted using a chemical-ionization quadrupole mass spectrometer, with a much weaker electric field, demonstrated that ion-molecule reactions likely proceed through a combination of ligand-switching and direct charge transfer mechanisms. Laboratory tests suggest that benzene cluster cations may be suitable for the selective ionization of sesquiterpenes, where minimal fragmentation (< 25 %) was observed for the detection of β-caryophyllene, a bicyclic sesquiterpene. The in-field stability of benzene cluster cations using CI-ToFMS was examined in the marine boundary layer during the High Wind Gas Exchange Study (HiWinGS). The use of benzene cluster cation chemistry for the selective detection of DMS was validated against an atmospheric pressure ionization mass spectrometer, where measurements from the two instruments were highly correlated (R2 > 0.95, 10 s averages) over a wide range of sampling conditions.

  17. Revisiting benzene cluster cations for the chemical ionization of dimethyl sulfide and select volatile organic compounds

    NASA Astrophysics Data System (ADS)

    Kim, M. J.; Zoerb, M. C.; Campbell, N. R.; Zimmermann, K. J.; Blomquist, B. W.; Huebert, B. J.; Bertram, T. H.

    2015-10-01

    Benzene cluster cations were revisited as a sensitive and selective reagent ion for the chemical ionization of dimethyl sulfide (DMS) and a select group of volatile organic compounds (VOCs). Laboratory characterization was performed using both a new set of compounds (i.e. DMS, β-caryophyllene) as well as previously studied VOCs (i.e., isoprene, α-pinene). Using a field deployable chemical ionization time-of-flight mass spectrometer (CI-ToFMS), benzene cluster cations demonstrated high sensitivity (> 1 ncps ppt-1) to DMS, isoprene, and α-pinene standards. Parallel measurements conducted using a chemical-ionization quadrupole mass spectrometer, with a weaker electric field, demonstrated that ion-molecule reactions likely proceed through a combination of ligand-switching and direct charge transfer mechanisms. Laboratory tests suggest that benzene cluster cations may be suitable for the selective ionization of sesquiterpenes, where minimal fragmentation (< 25 %) was observed for the detection of β-caryophyllene, a bicyclic sesquiterpene. The field stability of benzene cluster cations using CI-ToFMS was examined in the marine boundary layer during the High Wind Gas Exchange Study (HiWinGS). The use of benzene cluster cation chemistry for the selective detection of DMS was validated against an atmospheric pressure ionization mass spectrometer. Measurements from the two instruments were highly correlated (R2=0.80) over a wide range of sampling conditions.

  18. Revisiting benzene cluster cations for the chemical ionization of dimethyl sulfide and select volatile organic compounds

    DOE PAGESBeta

    Kim, Michelle J.; Zoerb, Matthew C.; Campbell, Nicole R.; Zimmermann, Kathryn J.; Blomquist, Byron W.; Huebert, Barry J.; Bertram, Timothy H.

    2016-01-01

    Benzene cluster cations were revisited as a sensitive and selective reagent ion for the chemical ionization of dimethyl sulfide (DMS) and a select group of volatile organic compounds (VOCs). Laboratory characterization was performed using both a new set of compounds (i.e., DMS, β-caryophyllene) as well as previously studied VOCs (i.e., isoprene, α-pinene). Using a field deployable chemical-ionization time-of-flight mass spectrometer (CI-ToFMS), benzene cluster cations demonstrated high sensitivity (> 1 ncps ppt−1) to DMS, isoprene, and α-pinene standards. Parallel measurements conducted using a chemical-ionization quadrupole mass spectrometer, with a much weaker electric field, demonstrated that ion–molecule reactions likely proceed through a combination of ligand-switching and directmore » charge transfer mechanisms. Laboratory tests suggest that benzene cluster cations may be suitable for the selective ionization of sesquiterpenes, where minimal fragmentation (< 25 %) was observed for the detection of β-caryophyllene, a bicyclic sesquiterpene. The in-field stability of benzene cluster cations using CI-ToFMS was examined in the marine boundary layer during the High Wind Gas Exchange Study (HiWinGS). The use of benzene cluster cation chemistry for the selective detection of DMS was validated against an atmospheric pressure ionization mass spectrometer, where measurements from the two instruments were highly correlated (R2 > 0.95, 10 s averages) over a wide range of sampling conditions.« less

  19. Mineralogical studies of sulfide samples and volatile concentrations of basalt glasses from the southern Juan de Fuca Ridge

    NASA Technical Reports Server (NTRS)

    Brett, Robin; Evans, Howard T., Jr.; Wandless, M. V.; Gibson, E. K., Jr.; Hedenquist, Jeffrey W.

    1987-01-01

    Sulfide samples obtained from Alvin dives on the southern Juan de Fuca Ridge were examined, showing the presence of two previously undiscovered minerals, both formed at low temperatures. The first detection of lizardite, starkeyite, and anatase in such an environment is also reported. Sulfide geothermometry involving the Cu-Fe-S system shows a vent temperature of less than 328 C for one sample. Ice-melting temperatures on inclusions from this sample are about -2.8 C, and fluid inclusion studies on crystals near this sample show pressure-corrected homogenization temperatures of 268 and 285 C. Volatile concentrations from vesicle-free basalt glass from the vent field are found to be about 0.0013 wt pct CO2 and 0.16 wt pct H2O.

  20. Fulvic acid-sulfide ion competition for mercury ion binding in the Florida everglades

    USGS Publications Warehouse

    Reddy, M.M.; Aiken, G.R.

    2001-01-01

    Negatively charged functional groups of fulvic acid compete with inorganic sulfide ion for mercury ion binding. This competition is evaluated here by using a discrete site-electrostatic model to calculate mercury solution speciation in the presence of fulvic acid. Model calculated species distributions are used to estimate a mercury-fulvic acid apparent binding constant to quantify fulvic acid and sulfide ion competition for dissolved inorganic mercury (Hg(II)) ion binding. Speciation calculations done with PHREEQC, modified to use the estimated mercury-fulvic acid apparent binding constant, suggest that mercury-fulvic acid and mercury-sulfide complex concentrations are equivalent for very low sulfide ion concentrations (about 10-11 M) in Everglades' surface water. Where measurable total sulfide concentration (about 10-7 M or greater) is present in Everglades' surface water, mercury-sulfide complexes should dominate dissolved inorganic mercury solution speciation. In the absence of sulfide ion (for example, in oxygenated Everglades' surface water), fulvic acid binding should dominate Everglades' dissolved inorganic mercury speciation.

  1. 40 CFR 60.648 - Optional procedure for measuring hydrogen sulfide in acid gas-Tutwiler Procedure. 1

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... hydrogen sulfide in acid gas-Tutwiler Procedure. 1 60.648 Section 60.648 Protection of Environment..., 2011 § 60.648 Optional procedure for measuring hydrogen sulfide in acid gas—Tutwiler Procedure. 1 1 Gas... dilute solutions are used. In principle, this method consists of titrating hydrogen sulfide in a...

  2. 40 CFR 60.5408 - What is an optional procedure for measuring hydrogen sulfide in acid gas-Tutwiler Procedure?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... measuring hydrogen sulfide in acid gas-Tutwiler Procedure? 60.5408 Section 60.5408 Protection of Environment... § 60.5408 What is an optional procedure for measuring hydrogen sulfide in acid gas—Tutwiler Procedure... of titrating hydrogen sulfide in a gas sample directly with a standard solution of iodine....

  3. 40 CFR 60.648 - Optional procedure for measuring hydrogen sulfide in acid gas-Tutwiler Procedure. 1

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... hydrogen sulfide in acid gas-Tutwiler Procedure. 1 60.648 Section 60.648 Protection of Environment... procedure for measuring hydrogen sulfide in acid gas—Tutwiler Procedure. 1 1 Gas Engineers Handbook, Fuel.... In principle, this method consists of titrating hydrogen sulfide in a gas sample directly with...

  4. 40 CFR 60.648 - Optional procedure for measuring hydrogen sulfide in acid gas-Tutwiler Procedure. 1

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... hydrogen sulfide in acid gas-Tutwiler Procedure. 1 60.648 Section 60.648 Protection of Environment..., 2011 § 60.648 Optional procedure for measuring hydrogen sulfide in acid gas—Tutwiler Procedure. 1 1 Gas... dilute solutions are used. In principle, this method consists of titrating hydrogen sulfide in a...

  5. 40 CFR 60.648 - Optional procedure for measuring hydrogen sulfide in acid gas-Tutwiler Procedure. 1

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... hydrogen sulfide in acid gas-Tutwiler Procedure. 1 60.648 Section 60.648 Protection of Environment... procedure for measuring hydrogen sulfide in acid gas—Tutwiler Procedure. 1 1 Gas Engineers Handbook, Fuel.... In principle, this method consists of titrating hydrogen sulfide in a gas sample directly with...

  6. 40 CFR 60.5408 - What is an optional procedure for measuring hydrogen sulfide in acid gas-Tutwiler Procedure?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... measuring hydrogen sulfide in acid gas-Tutwiler Procedure? 60.5408 Section 60.5408 Protection of Environment... § 60.5408 What is an optional procedure for measuring hydrogen sulfide in acid gas—Tutwiler Procedure... of titrating hydrogen sulfide in a gas sample directly with a standard solution of iodine....

  7. 40 CFR 60.648 - Optional procedure for measuring hydrogen sulfide in acid gas-Tutwiler Procedure. 1

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... hydrogen sulfide in acid gas-Tutwiler Procedure. 1 60.648 Section 60.648 Protection of Environment... procedure for measuring hydrogen sulfide in acid gas—Tutwiler Procedure. 1 1 Gas Engineers Handbook, Fuel.... In principle, this method consists of titrating hydrogen sulfide in a gas sample directly with...

  8. Partitioning of U, Th and K Between Metal, Sulfide and Silicate, Insights into the Volatile-Content of Mercury

    NASA Technical Reports Server (NTRS)

    Habermann, M.; Boujibar, A.; Righter, K.; Danielson, L.; Rapp, J.; Righter, M.; Pando, K.; Ross, D. K.; Andreasen, R.; Chidester, B.

    2016-01-01

    During the early stages of the Solar System formation, especially during the T-Tauri phase, the Sun emitted strong solar winds, which are thought to have expelled a portion of the volatile elements from the inner solar system. It is therefore usually believed that the volatile depletion of a planet is correlated with its proximity to the Sun. This trend was supported by the K/Th and K/U ratios of Venus, the Earth, and Mars. Prior to the MESSENGER mission, it was expected that Mercury is the most volatile-depleted planet. However, the Gamma Ray Spectrometer of MESSENGER spacecraft revealed elevated K/U and K/Th ratios for the surface of Mercury, much higher than previous expectations. It is possible that the K/Th and K/U ratios on the surface are not a reliable gauge of the bulk volatile content of Mercury. Mercury is enriched in sulfur and is the most reduced of the terrestrial planets, with oxygen fugacity (fO2) between IW-6.3 and IW-2.6 log units. At these particular compositions, U, Th and K behave differently and can become more siderophile or chalcophile. If significant amounts of U and Th are sequestered in the core, the apparent K/U and K/Th ratios measured on the surface may not represent the volatile budget of the whole planet. An accurate determination of the partitioning of these elements between silicate, metal, and sulfide phases under Mercurian conditions is therefore essential to better constrain Mercury's volatile content and assess planetary formation models.

  9. Reduction of volatile acidity of acidic wines by immobilized Saccharomyces cerevisiae cells.

    PubMed

    Vilela, A; Schuller, D; Mendes-Faia, A; Côrte-Real, M

    2013-06-01

    Excessive volatile acidity in wines is a major problem and is still prevalent because available solutions are nevertheless unsatisfactory, namely, blending the filter-sterilized acidic wine with other wines of lower volatile acidity or using reverse osmosis. We have previously explored the use of an empirical biological deacidification procedure to lower the acetic acid content of wines. This winemaker's enological practice, which consists in refermentation associated with acetic acid consumption by yeasts, is performed by mixing the acidic wine with freshly crushed grapes, musts, or marc from a finished wine fermentation. We have shown that the commercial strain Saccharomyces cerevisiae S26 is able to decrease the volatile acidity of acidic wines with a volatile acidity higher than 1.44 g L(-1) acetic acid, with no detrimental impact on wine aroma. In this study, we aimed to optimize the immobilization of S26 cells in alginate beads for the bioreduction of volatile acidity of acidic wines. We found that S26 cells immobilized in double-layer alginate-chitosan beads could reduce the volatile acidity of an acidic wine (1.1 g L(-1) acetic acid, 12.5 % (v/v) ethanol, pH 3.12) by 28 and 62 % within 72 and 168 h, respectively, associated with a slight decrease in ethanol concentration (0.7 %). Similar volatile acidity removal efficiencies were obtained in medium with high glucose concentration (20 % w/v), indicating that this process may also be useful in the deacidification of grape musts. We, therefore, show that immobilized S. cerevisiae S26 cells in double-layer beads are an efficient alternative to improve the quality of wines with excessive volatile acidity. PMID:23361840

  10. Iron sulfide oxidation and the chemistry of acid generation

    NASA Astrophysics Data System (ADS)

    Sullivan, Patrick J.; Yelton, Jennifer L.; Reddy, K. J.

    1988-06-01

    Acid mine drainage, produced from the oxidation of iron sulfides, often contains elevated levels of dissolved aluminum (AI), iron (Fe), and sulfate (SO4) and low pH. Understanding the interactions of these elements associated with acid mine drainage is necessary for proper solid waste management planning. Two eastern oil shales were leached using humidity cell methods. This study used a New Albany Shale (4.6 percent pyrite) and a Chattanooga Shale (1.5 percent pyrite). The leachates from the humidity cells were filtered, and the filtrates were analyzed for total concentrations of cations and anions. After correcting for significant solution species and complexes, ion activities were calculated from total concentrations. The results show that the activities of Fe3+, Fe2+, Al3+, and SO4 2- increased due to the oxidation of pyrite. Furthermore, the oxidation of pyrite resulted in a decreased pH and an increased pe+pH (redox-potential). The Fe3+ and Fe2+ activities appeared to be controlled by amorphous Fe(OH)3 solid phase above a pH of 6.0 and below pe+pH 11.0. The Fe3+, Fe2+, and SO4 2- activities reached saturation with respect to FeOHSO4 solid phase between pH 3.0 and 6.0 and below pe+pH 11.0 Below a pH of 3.0 and above a pe+pH of 11.0, Fe2+, Fe3+, and SO4 2- activities are supported by FeSO4·7H2O solid phase. Above a pH of 6.0, the Al3+ activity showed an equilibrium with amorphous Al(OH)3 solid phase. Below pH 6.0, Al3+ and SO4 2- activities are regulated by the AlOHSO4 solid phase, irrespective of pe+pH. The results of this study suggest that under oxidizing conditions with low to high leaching potential, activities of Al and Fe can be predicted on the basis of secondary mineral formation over a wide range of pH and redox. As a result, the long-term chemistry associated with disposal environments can be largely predicted (including trace elements).

  11. Mineralogical studies of sulfide samples and volatile concentrations of basalt glasses from the southern Juan de Fuca Ridge.

    PubMed

    Brett, R; Evans, H T; Gibson, E K; Hedenquist, J W; Wandless, M V; Sommer, M A

    1987-10-10

    Sulfide samples obtained from the U.S. Geological Survey's DSRV Alvin dives on the southern Juan de Fuca Ridge closely resemble those from the same area described by Koski et al. (1984). Major minerals include sphalerite, wurtzite, pyrite, marcasite, isocubanite, anhydrite, and chalcopyrite. Equilibrium, if attained at all, during deposition of most sulfides was a transient event over a few tens of micrometers at most and was perturbed by rapid temperature and compositional changes of the circulating fluid. Two new minerals were found: one, a hydrated Zn, Fe hydroxy-chlorosulfate, and the other, a (Mn, Mg, Fe) hydroxide or hydroxy-hydrate. Both were formed at relatively low temperatures. Lizardite, starkeyite, and anatase were found for the first time in such an environment. Sulfide geothermometry involving the system Cu-Fe-S indicates a vent temperature of <328 degrees C for one sample. Fluid inclusion studies on crystals from the same vicinity of the same sample give pressure-corrected homogenization temperatures of 268 degrees and 285 degrees C. Ice-melting temperatures on inclusions from the same sample are about -2.8 degrees C, indicating that the equivalent salinity of the trapped fluid is about 50% greater than that of seawater. Volatile concentrations from vesicle-free basalt glass from the vent field are about 0.013 wt% CO2 and 0.16 wt% H2O, CO2 contents in these samples yield an entrapment depth of 2200 m of seawater, which is the depth from which the samples were collected. PMID:11542121

  12. Effect of nitrogen supplementation and Saccharomyces species on hydrogen sulfide and other volatile sulfur compounds in shiraz fermentation and wine.

    PubMed

    Ugliano, Maurizio; Fedrizzi, Bruno; Siebert, Tracey; Travis, Brooke; Magno, Franco; Versini, Giuseppe; Henschke, Paul A

    2009-06-10

    A Shiraz must with low yeast assimilable nitrogen (YAN) was supplemented with two increasing concentrations of diammonium phosphate (DAP) and fermented with one Saccharomyces cerevisiae and one Saccharomyces bayanus strain, with maceration on grape skins. Hydrogen sulfide (H(2)S) was monitored throughout fermentation, and a total of 16 volatile sulfur compounds (VSCs) were quantified in the finished wines. For the S. cerevisiae yeast strain, addition of DAP to a final YAN of 250 or 400 mg/L resulted in an increased formation of H(2)S compared to nonsupplemented fermentations (100 mg/L YAN). For this yeast, DAP-supplemented fermentations also showed prolonged formation of H(2)S into the later stage of fermentation, which was associated with increased H(2)S in the final wines. The S. bayanus strain showed a different H(2)S production profile, in which production was inversely correlated to initial YAN. No correlation was found between total H(2)S produced by either yeast during fermentation and H(2)S concentration in the final wines. For both yeasts, DAP supplementation yielded higher concentrations of organic VSCs in the finished wines, including sulfides, disulfides, mercaptans, and mercaptoesters. PCA analysis indicated that nitrogen supplementation before fermentation determined a much clearer distinction between the VSC profiles of the two yeasts compared to nonsupplemented fermentations. These results raise questions concerning the widespread use of DAP in the management of low YAN fermentations with respect to the formation of reductive characters in wine. PMID:19391591

  13. In situ solvothermal growth of metal-organic framework-5 supported on porous copper foam for noninvasive sampling of plant volatile sulfides.

    PubMed

    Hu, Yuling; Lian, Haixian; Zhou, Langjun; Li, Gongke

    2015-01-01

    The present study reported on an in situ solvothermal growth method for immobilization of metal-organic framework MOF-5 on porous copper foam support for enrichment of plant volatile sulfides. The porous copper support impregnated with mother liquor of MOF-5 anchors the nucleation and growth of MOF crystallites at its surface, and its architecture of the three-dimensional channel enables accommodation of the MOF-5 crystallite seed. A continuous and well-intergrown MOF-5 layer, evidenced from scanning electron microscope imaging and X-ray diffraction, was successfully immobilized on the porous metal bar with good adhesion and high stability. Results show that the resultant MOF-5 coating was thermally stable up to 420 °C and robust enough for replicate extraction for at least 200 times. The MOF-5 bar was then applied to the headspace sorptive extraction of the volatile organic sulfur compounds in Chinese chive and garlic sprout in combination with thermal desorption-gas chromatography/mass spectrometry. It showed high extraction sensitivity and good selectivity to these plant volatile sulfides owing to the extraordinary porosity of the metal-organic framework as well as the interaction between the S-donor sites and the surface cations at the crystal edges. Several primary sulfur volatiles containing allyl methyl sulfide, dimethyl disulfide, diallyl sulfide, methyl allyl disulfide, and diallyl disulfide were quantified. Their limits of detection were found to be in the range of 0.2-1.7 μg/L. The organic sulfides were detected in the range of 6.0-23.8 μg/g with recoveries of 76.6-100.2% in Chinese chive and 11.4-54.6 μg/g with recoveries of 77.1-99.8% in garlic sprout. The results indicate the immobilization of MOF-5 on copper foam provides an efficient enrichment formats for noninvasive sampling of plant volatiles. PMID:25435245

  14. Emissions of volatile fatty acids from feed at dairy facilities

    NASA Astrophysics Data System (ADS)

    Alanis, Phillip; Ashkan, Shawn; Krauter, Charles; Campbell, Sean; Hasson, Alam S.

    2010-12-01

    Recent studies suggest that dairy operations may be a major source of non-methane volatile organic compounds in dairy-intensive regions such as Central California, with short chain carboxylic acids (volatile fatty acids or VFAs) as the major components. Emissions of four VFAs (acetic acid, propanoic acid, butanoic acid and hexanoic acid) were measured from two feed sources (silage and total mixed rations (TMR)) at six Central California Dairies over a fifteen-month period. Measurements were made using a combination of flux chambers, solid phase micro-extraction fibers coupled to gas chromatography mass spectrometry (SPME/GC-MS) and infra-red photoaccoustic detection (IR-PAD for acetic acid only). The relationship between acetic acid emissions, source surface temperature and four sample composition factors (acetic acid content, ammonia-nitrogen content, water content and pH) was also investigated. As observed previously, acetic acid dominates the VFA emissions. Fluxes measured by IR-PAD were systematically lower than SPME/GC-MS measurements by a factor of two. High signals in field blanks prevented emissions from animal waste sources (flush lane, bedding, open lot) from being quantified. Acetic acid emissions from feed sources are positively correlated with surface temperature and acetic acid content. The measurements were used to derive a relationship between surface temperature, acetic acid content and the acetic acid flux. The equation derived from SPME/GC-MS measurements predicts estimated annual average acetic acid emissions of (0.7 + 1/-0.4) g m -2 h -1 from silage and (0.2 + 0.3/-0.1) g m -2 h -1 from TMR using annually averaged acetic acid content and meteorological data. However, during the summer months, fluxes may be several times higher than these values.

  15. Quadruple sulfur isotope constraints on the origin and cycling of volatile organic sulfur compounds in a stratified sulfidic lake

    NASA Astrophysics Data System (ADS)

    Oduro, Harry; Kamyshny, Alexey; Zerkle, Aubrey L.; Li, Yue; Farquhar, James

    2013-11-01

    We have quantified the major forms of volatile organic sulfur compounds (VOSCs) distributed in the water column of stratified freshwater Fayetteville Green Lake (FGL), to evaluate the biogeochemical pathways involved in their production. The lake's anoxic deep waters contain high concentrations of sulfate (12-16 mmol L-1) and sulfide (0.12 μmol L-1 to 1.5 mmol L-1) with relatively low VOSC concentrations, ranging from 0.1 nmol L-1 to 2.8 μmol L-1. Sulfur isotope measurements of combined volatile organic sulfur compounds demonstrate that VOSC species are formed primarily from reduced sulfur (H2S/HS-) and zero-valent sulfur (ZVS), with little input from sulfate. Thedata support a role of a combination of biological and abiotic processes in formation of carbon-sulfur bonds between reactive sulfur species and methyl groups of lignin components. These processes are responsible for very fast turnover of VOSC species, maintaining their low levels in FGL. No dimethylsulfoniopropionate (DMSP) was detected by Electrospray Ionization Mass Spectrometry (ESI-MS) in the lake water column or in planktonic extracts. These observations indicate a pathway distinct from oceanic and coastal marine environments, where dimethylsulfide (DMS) and other VOSC species are principally produced via the breakdown of DMSP by plankton species.

  16. CHROMATOGRAPHIC SEPARATION AND IDENTIFICATION OF PRODUCTS FROM THE REACTION OF DIMETHYLARSINIC ACID WITH HYDROGEN SULFIDE

    EPA Science Inventory

    The reaction of dimethylarsinic acid (DMAV) with hydrogen sulfide (H2S) is of biological significance and may be implicated in the overall toxicity and carcinogenicity of arsenic. The course of the reaction in aqueous phase was monitored and an initial product, dimethylthioarsin...

  17. Dosing free nitrous acid for sulfide control in sewers: results of field trials in Australia.

    PubMed

    Jiang, Guangming; Keating, Anthony; Corrie, Shaun; O'halloran, Kelly; Nguyen, Lam; Yuan, Zhiguo

    2013-09-01

    Intermittent dosing of free nitrous acid (FNA), with or without the simultaneous dosing of hydrogen peroxide, is a new strategy developed recently for the control of sulfide production in sewers. Six-month field trials have been carried out in a rising main sewer in Australia (150 mm in diameter and 1080 m in length) to evaluate the performance of the strategy that was previously demonstrated in laboratory studies. In each trial, FNA was dosed at a pumping station for a period of 8 or 24 h, some with simultaneous hydrogen peroxide dosing. The sulfide control effectiveness was monitored by measuring, on-line, the dissolved sulfide concentration at a downstream location of the pipeline (828 m from the pumping station) and the gaseous H2S concentration at the discharge manhole. Effective sulfide control was achieved in all nine consecutive trials, with sulfide production reduced by more than 80% in 10 days following each dose. Later trials achieved better control efficiency than the first few trials possibly due to the disrupting effects of FNA on sewer biofilms. This suggests that an initial strong dose (more chemical consumption) followed by maintenance dosing (less chemical consumption) could be a very cost-effective way to achieve consistent control efficiency. It was also found that heavy rainfall slowed the recovery of sulfide production after dosing, likely due to the dilution effects and reduced retention time. Overall, intermittent dose of FNA or FNA in combination with H2O2 was successfully demonstrated to be a cost-effective method for sulfide control in rising main sewers. PMID:23764584

  18. Aldol Condensation of Volatile Carbonyl Compounds in Acidic Aerosols

    NASA Astrophysics Data System (ADS)

    Noziere, B.; Esteve, W.

    2003-12-01

    Reactions of volatile organic compounds in acidic aerosols have been shown recently to be potentially important for organic aerosol formation and growth. Aldol condensation, the acid-catalyzed polymerization of carbonyl compounds, is a likely candidate to enhance the flux of organic matter from the gas phase to the condensed phase in the atmosphere. Until now these reactions have only been characterized for conditions relevant to synthesis (high acidities and liquid phase systems) and remote from atmospheric ones. In this work, the uptake of gas-phase acetone and 2,4\\-pentanedione by sulfuric acid solutions has been measured at room temperature using a Rotated Wetted Wall Reactor coupled to a Mass Spectrometer. The aldol condensation rate constants for 2,4\\-pentanedione measured so far for sulfuric acid solutions between 96 and 70 % wt. display a variation with acidity in agreement with what predicted in the organic chemical literature. The values of these constants, however, are much lower than expected for this compound, and comparable to the ones of acetone. Experiments are underway to complete this study to lower acidities and understand the discrepancies with the predicted reactivity.

  19. Anthropogenic Oxidation of Seafloor Massive Sulfide (SMS) deposits: Implications for Localized Seafloor Acid Generation

    NASA Astrophysics Data System (ADS)

    Bilenker, L.; Romano, G. Y.; Mckibben, M. A.

    2011-12-01

    A rapid increase in the price of transition metals in recent years has piqued interest in deep sea in situ mining of seafloor massive sulfide (SMS) deposits. There are important unanswered questions about the potential environmental effects of seafloor mining, particularly localized sulfuric acid generation. Currently there is a paucity of data on the oxidation kinetics of sulfide minerals in seawater. Seafloor massive sulfides oxidize rapidly via irreversible, acid-producing reactions. The oxidation kinetics of these minerals need to be quantified to estimate the significance of acid production. Laboratory experiments have been performed to evaluate the effects of pH, temperature, oxidant concentration, and mineral surface area on the rate of oxidation of chalcopyrite (CuFeS2) and pyrrhotite (Fe1-xS) in seawater. Temperature controlled circulation baths, Teflon reaction vessels, synthetic seawater, and pure, hand sorted natural sulfide mineral crystals are used in experiments. Both batch and flow-through reactor methods are employed. Reaction products are analyzed using ICP-MS. The rate law is expressed as follows: R = k (MO2,aq)a(MH+)b where R is the specific mineral oxidation rate (moles/m2/sec), k is the rate constant (a function of temperature), and a and b are reaction orders for molar aqueous species' concentrations (M). The initial rate method is used to determine the reaction order of each variable. Chalcopyrite and pyrrhotite are being studied because as the slowest- and fastest-oxidizing of the common sulfide minerals found in SMS deposits, they bound the range of rates seen in seafloor settings and can be used to place lower and upper limits on abiotic rates of metal release and sulfuric acid production. Experiments to date indicate an oxidation rate of pyrrhotite several times faster than that of chalcopyrite. The rate laws, when incorporated into reactive-transport computer codes, will enable the prediction of localized anthropogenic sulfuric acid

  20. Removal and recovery of inhibitory volatile fatty acids from mixed acid fermentations by conventional electrodialysis.

    PubMed

    Jones, Rhys Jon; Massanet-Nicolau, Jaime; Guwy, Alan; Premier, Giuliano C; Dinsdale, Richard M; Reilly, Matthew

    2015-08-01

    Hydrogen production during dark fermentation is inhibited by the co-production of volatile fatty acids (VFAs) such as acetic and n-butyric acid. In this study, the effectiveness of conventional electrodialysis (CED) in reducing VFA concentrations in model solutions and hydrogen fermentation broths is evaluated. This is the first time CED has been reported to remove VFAs from hydrogen fermentation broths. During 60 min of operation CED removed up to 99% of VFAs from model solutions, sucrose-fed and grass-fed hydrogen fermentation broths, containing up to 1200 mg l(-1) each of acetic acid, propionic acid, i-butyric acid, n-butyric acid, i-valeric acid, and n-valeric acid. CED's ability to remove VFAs from hydrogen fermentation broths suggests that this technology is capable of improving hydrogen yields from dark fermentation. PMID:25898090

  1. Mechanisms of volatile production from non-sulfur amino acids by irradiation

    NASA Astrophysics Data System (ADS)

    Ahn, Dong Uk; Lee, Eun Joo; Feng, Xi; Zhang, Wangang; Lee, Ji Hwan; Jo, Cheorun; Nam, Kichang

    2016-02-01

    Non-sulfur amino acid monomers were used to study the mechanisms of volatile production in meat by irradiation. Irradiation not only produced many volatiles but also increased the amounts of volatiles from non-sulfur amino acid monomers. The major reaction mechanisms involved in volatile production from each group of the amino acids by irradiation differ significantly. However, we speculate that the radiolysis of amino acid side chains were the major mechanism. In addition, Strecker degradation, especially the production of aldehydes from aliphatic group amino acids, and deamination, isomerization, decarboxylation, cyclic reaction and dehydrogenation of the initial radiolytic products were also contributed to the production of volatile compounds. Each amino acid monomers produced different odor characteristics, but the intensities of odor from all non-sulfur amino acid groups were very weak. This indicated that the contribution of volatiles produced from non-sulfur amino acids was minor. If the volatile compounds from non-sulfur amino acids, especially aldehydes, interact with other volatiles compounds such as sulfur compounds, however, they can contribute to the off-odor of irradiated meat significantly.

  2. Use of ferric sulfate: acid media for the desulfurization of model compounds of coal. [Dibenzothiophene, diphenyl sulfide, di-n-butyl sulfide

    SciTech Connect

    Clary, L.R.; Vermeulen, T.; Lynn, S.

    1980-12-01

    The objective of this work has been to investigate the ability of ferric sulfate-acid leach systems to oxidize the sulfur in model compounds of coal. Ferric iron-acid leach systems have been shown to be quite effective at removal of inorganic sulfur in coal. In this study, the oxidative effect of ferric iron in acid-leach systems was studied using dibenzothiophene, diphenyl sulfide, and di-n-butyl sulfide as models of organic sulfur groups in coal. Nitrogen and oxygen, as well as various transition metal catalysts and oxidants, were utilized in this investigation. Dibenzothiophene was found to be quite refractory to oxidation, except in the case where metavanadate was added, where it appears that 40% oxidation to sulfone could have occurred per hour at 150/sup 0/C and mild oxygen pressure. Diphenyl sulfide was selectively oxidized to sulfoxide and sulfone in an iron and oxygen system. Approximately 15% conversion to sulfone occurred per hour under these conditions. Some of the di-n-butyl sulfide was cracked to 1-butene and 1-butanethiol under similar conditions. Zinc chloride and ferric iron were used at 200/sup 0/C in an attempt to desulfonate dibenzothiophene sulfone, diphenyl sulfone, and di-n-butyl sulfone. Di-n-butyl sulfone was completely desulfurized on one hour and fragmented to oxidized parafins, while dibenzothiophene sulfone and diphenyl sulfone were unaffected. These results suggest that an iron-acid leach process could only selectively oxidize aryl sulfides under mild conditions, representing only 20% of the organic sulfur in coal (8% of the total sulfur). Removal through desulfonation once selective sulfur oxidation had occurred was only demonstrated for alkyl sulfones, with severe oxidation of the fragmented paraffins also occurring in one hour.

  3. Reduction of acid rock drainage using steel slag in cover systems over sulfide rock waste piles.

    PubMed

    de Almeida, Rodrigo Pereira; Leite, Adilson do Lago; Borghetti Soares, Anderson

    2015-04-01

    The extraction of gold, coal, nickel, uranium, copper and other earth-moving activities almost always leads to environmental damage. In metal and coal extraction, exposure of sulfide minerals to the atmosphere leads to generation of acid rock drainage (ARD) and in underground mining to acid mine drainage (AMD) due to contamination of infiltrating groundwater. This study proposes to develop a reactive cover system that inhibits infiltration of oxygen and also releases alkalinity to increase the pH of generated ARD and attenuate metal contaminants at the same time. The reactive cover system is constructed using steel slag, a waste product generated from steel industries. This study shows that this type of cover system has the potential to reduce some of the adverse effects of sulfide mine waste disposal on land. Geochemical and geotechnical characterization tests were carried out. Different proportions of sulfide mine waste and steel slag were studied in leachate extraction tests. The best proportion was 33% of steel slag in dry weight. Other tests were conducted as follows: soil consolidation, saturated permeability and soil water characteristic curve. The cover system was numerically modeled through unsaturated flux analysis using Vadose/w. The solution proposed is an oxygen transport barrier that allows rain water percolation to treat the ARD in the waste rock pile. The results showed that the waste pile slope is an important factor and the cover system must have 5 m thickness to achieve an acceptable effectiveness. PMID:25750056

  4. Microbial Diversity and Population Structure of Extremely Acidic Sulfur-Oxidizing Biofilms From Sulfidic Caves

    NASA Astrophysics Data System (ADS)

    Jones, D.; Stoffer, T.; Lyon, E. H.; Macalady, J. L.

    2005-12-01

    Extremely acidic (pH 0-1) microbial biofilms called snottites form on the walls of sulfidic caves where gypsum replacement crusts isolate sulfur-oxidizing microorganisms from the buffering action of limestone host rock. We investigated the phylogeny and population structure of snottites from sulfidic caves in central Italy using full cycle rRNA methods. A small subunit rRNA bacterial clone library from a Frasassi cave complex snottite sample contained a single sequence group (>60 clones) similar to Acidithiobacillus thiooxidans. Bacterial and universal rRNA clone libraries from other Frasassi snottites were only slightly more diverse, containing a maximum of 4 bacterial species and probably 2 archaeal species. Fluorescence in situ hybridization (FISH) of snottites from Frasassi and from the much warmer Rio Garrafo cave complex revealed that all of the communities are simple (low-diversity) and dominated by Acidithiobacillus and/or Ferroplasma species, with smaller populations of an Acidimicrobium species, filamentous fungi, and protists. Our results suggest that sulfidic cave snottites will be excellent model microbial ecosystems suited for ecological and metagenomic studies aimed at elucidating geochemical and ecological controls on microbial diversity, and at mapping the spatial history of microbial evolutionary events such as adaptations, recombinations and gene transfers.

  5. Microbial Electrochemical Monitoring of Volatile Fatty Acids during Anaerobic Digestion.

    PubMed

    Jin, Xiangdan; Angelidaki, Irini; Zhang, Yifeng

    2016-04-19

    Volatile fatty acid (VFA) concentration is known as an important indicator to control and optimize anaerobic digestion (AD) process. In this study, an innovative VFA biosensor was developed based on the principle of a microbial desalination cell. The correlation between current densities and VFA concentrations was first evaluated with synthetic digestate. Two linear relationships were observed between current densities and VFA levels from 1 to 30 mM (0.04 to 8.50 mA/m(2), R(2) = 0.97) and then from 30 to 200 mM (8.50 to 10.80 mA/m(2), R(2) = 0.95). The detection range was much broader than that of other existing VFA biosensors. The biosensor had no response to protein and lipid which are frequently found along with VFAs in organic waste streams from AD, suggesting the selective detection of VFAs. The current displayed different responses to VFA levels when different ionic strengths and external resistances were applied, though linear relationships were always observed. Finally, the biosensor was further explored with real AD effluents and the results did not show significance differences with those measured by GC. The simple and efficient biosensor showed promising potential for online, inexpensive, and reliable measurement of VFA levels during AD and other anaerobic processes. PMID:27054267

  6. Immobilization of lactobionic acid on the surface of cadmium sulfide nanoparticles and their interaction with hepatocytes.

    PubMed

    Kamruzzaman Selim, K M; Xing, Zhi-Cai; Guo, Haiqing; Kang, Inn-Kyu

    2009-09-01

    In the current study, beta-galactose-carrying lactobionic acid (LA) was conjugated on the surface of mercaptoacetic acid-coated cadmium sulfide nanoparticles (CSNPs) to ensure specific recognition of liver cells (hepatocytes) and to enhance biocompatibility. Maltotrionic acid-coated CSNPs (MCSNPs) were also prepared for use as a control. The results showed that LA-immobilized CSNPs (LCSNPs) were selectively and rapidly internalized into hepatocytes and emitted more intense fluorescence images as well as demonstrated increased biocompatible behavior in vitro than those of CSNPs and MCSNPs. Furthermore, the uptake amount of LCSNPs into hepatocytes was higher than that of CSNPs and MCSNPs. All these results indicate that LCSNPs may find ever-growing applications in biological labels and detection or contrast agents in life science and medical diagnostics. PMID:19365615

  7. Capillary gas chromatography determination of volatile organic acids in rain and fog samples

    SciTech Connect

    Kawamura, K.; Kaplan, I.R.

    1984-08-01

    A fused silica capillary gas chromatography technique is described for the determination of volatile acids (C/sub 1/-C/sub 7/) in rain samples using p-bromophenacyl esters. As the sensitivity of this method is high (GC detection limit is ca. 10 pmol), a small volume of rain (25-50 mL) or fog (1-2 mL) is needed. Spiked experiments showed that the measured concentrations of volatile acids in the spiked rain samples linearly increased with a slope of approx.1 in proportion to the concentrations of volatile acids added in the rainwater. Repeated analyses of rain samples showed that relative standard deviations are less than or equal to 18% for C/sub 1/, C/sub 2/, and C/sub 3/ acids, which are the major volatile acids.

  8. Using electromagnetic induction technology to predict volatile fatty acid, source area differences

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Subsurface sampling techniques have been adapted to measure manure accumulation on feedlot surface. Objectives of this study were to determine if sensor data could be used to predict differences in volatile fatty acids (VFA) and other volatiles produced on the feedlot surface three days following a...

  9. Weathering processes and pickeringite formation in a sulfidic schist: a consideration in acid precipitation neutralization studies

    SciTech Connect

    Parnell, R.A. Jr.

    1983-01-01

    Extremely low abrasion pH values (2.8-3.3) characterize the weathering products of the Partridge Formation, a Middle-Ordovician metamorphosed, black, sulfidic shale. The local occurrence is observed of two sulfates that are rare in the Northeast: pickeringite and jarosite. X-ray diffraction studies of the weathering residues and the sulfate efflorescences have also identified dioctahedral and trioctahedral illite, kaolinite, vermiculite, and an 11-12 Angstrom phase, thought to be a type of randomly-interstratified biotite-vermiculite. From the mineralogical studies, qualitative weathering processes for the schist are formulated. A probable mechanism for the intense chemical weathering of the schist appears to be oxidation of iron sulfides to form iron oxide-hydroxides, sulfates, and sulfuric acid. This natural weathering process is proposed as an analog to anthropogenic low pH rock weathering resulting from acid precipitation. In the Northeast, natural weathering rates, may, in places, significantly affect the water chemistry and mineralogy used to quantify total (natural plus anthropogenic) weathering and leaching rates. 27 references, 4 figures.

  10. Dynamics of the anaerobic process: effects of volatile fatty acids.

    PubMed

    Pind, Peter F; Angelidaki, Irini; Ahring, Birgitte K

    2003-06-30

    A complex and fast dynamic response of the anaerobic biogas system was observed when the system was subjected to pulses of volatile fatty acids (VFAs). It was shown that a pulse of specific VFAs into a well-functioning continuous stirred tank reactor (CSTR) system operating on cow manure affected both CH(4) yield, pH, and gas production and that a unique reaction pattern was seen for the higher VFAs as a result of these pulses. In this study, two thermophilic laboratory reactors were equipped with a novel VFA-sensor for monitoring specific VFAs online. Pulses of VFAs were shown to have a positive effect on process yield and the levels of all VFA were shown to stabilize at a lower level after the biomass had been subjected to several pulses. The response to pulses of propionate or acetate was different from the response to butyrate, iso-butyrate, valerate, or iso-valerate. High concentrations of propionate affected the degradation of all VFAs, while a pulse of acetate affected primarily the degradation of iso-valerate or 2-methylbutyrate. Pulses of n-butyrate, iso-butyrate, and iso-valerate yielded only acetate, while degradation of n-valerate gave both propionate and acetate. Product sensitivity or inhibition was shown for the degradation of all VFAs tested. Based on the results, it was concluded that measurements of all specific VFAs are important for control purposes and increase and decrease in a specific VFA should always be evaluated in close relationship to the conversion of other VFAs and the history of the reactor process. It should be pointed out that the observed dynamics of VFA responses were based on hourly measurements, meaning that the response duration was much lower than the hydraulic retention time, which exceeds several days in anaerobic CSTR systems. PMID:12701145

  11. Branched-chain and aromatic amino acid catabolism into aroma volatiles in Cucumis melo L. fruit

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The unique aroma of melons (Cucumis melo L., Cucurbitaceae) is composed of many volatile compounds biosynthetically derived from fatty-acids, carotenoids, amino-acids as well as terpenes. Incubation of melon fruit cubes with amino- and a-keto acids led to the enhanced formation of aroma compounds be...

  12. Role of Volatile Fatty Acids in Development of the Cecal Microflora in Broiler Chickens during Growth

    PubMed Central

    van der Wielen, Paul W. J. J.; Biesterveld, Steef; Notermans, Servé; Hofstra, Harm; Urlings, Bert A. P.; van Knapen, Frans

    2000-01-01

    It is known that volatile fatty acids can inhibit growth of species of the family Enterobacteriaceae in vitro. However, whether these volatile fatty acids affect bacterial populations in the ceca of chickens is unknown. Therefore, a study was conducted to investigate if changes in volatile fatty acids in ceca of broiler chickens during growth affect bacterial populations. Results showed that members of the Enterobacteriaceae and enterococci are present in large numbers in 3-day-old broilers and start to decrease when broilers grow older. Lactobacilli are present in large numbers as well in 3-day-old broilers, but they remain stable during the growth of broilers. Acetate, butyrate, and propionate increase from undetectable levels in 1-day-old broilers to high concentrations in 15-day-old broilers, after which they stabilize. Significant negative correlations could be calculated between numbers of Enterobacteriaceae and concentrations of undissociated acetate, propionate, and butyrate. Furthermore, pure cultures of Enterobacteriaceae isolated from the ceca were grown in the presence of volatile fatty acids. Growth rates and maximal optical density decreased when these strains grew in the presence of increasing volatile fatty acid concentrations. It is concluded that volatile fatty acids are responsible for the reduction in numbers of Enterobacteriaceae in the ceca of broiler chickens during growth. PMID:10831435

  13. Mechanisms of volatile production from sulfur-containing amino acids by irradiation

    NASA Astrophysics Data System (ADS)

    Uk Ahn, Dong; Joo Lee, Eun; Feng, Xi; Zhang, Wangang; Lee, Ji Hwan; Jo, Cheorun; Nam, Kichang

    2016-02-01

    Sulfur-containing amino acids were used to study the mechanisms of off-odor production in meat by irradiation. Irradiation not only increased the amounts of volatiles but also produced many new volatiles from sulfur-containing amino acid monomers. We speculate that the majority of the volatiles were the direct radiolytic products of the side chains, but Strecker degradation as well as deamination and decarboxylation of radiolytic products were also involved in the production of volatile compounds from sulfur amino acids. The volatile compounds produced in amino acids were not only the primary products of irradiation, but also the products of secondary chemical reactions after the primary compounds were produced. Cysteine and methionine produced odor characteristics similar to that of the irradiated meat, but the amounts of sulfur volatiles from methionine were far greater than that of cysteine. Although the present study was carried out using an amino acid model system, the information can be applied to the quality indexes of irradiated meats as well as other food products.

  14. Bioconversion of volatile fatty acids into lipids by the oleaginous yeast Yarrowia lipolytica.

    PubMed

    Fontanille, Pierre; Kumar, Vinod; Christophe, Gwendoline; Nouaille, Régis; Larroche, Christian

    2012-06-01

    The valorization of volatile fatty acids into microbial lipids by the oleaginous yeast Yarrowia lipolytica was investigated. Therefore, a two-stage fed-batch strategy was designed: the yeast was initially grown on glucose or glycerol as carbon source, then sequential additions of acetic acid under nitrogen limiting conditions were performed after glucose or glycerol exhaustion. The typical values obtained with an initial 40 g/L concentration of glucose were close to 31 g/L biomass, a lipid concentration of 12.4 g/L, which correspond to a lipid content of the biomass close to 40%. This cultivation strategy was also efficient with other volatile fatty acids (butyric and propionic acids) or with a mixture of these three VFAs. The lipids composition was found quite similar to that of vegetable oils. The study demonstrated the feasibility of simultaneous biovalorization of volatile fatty acids and glycerol, two cheap industrial by-products. PMID:22464419

  15. Sulfidization of Au(111) from thioacetic acid: an experimental and theoretical study.

    PubMed

    Fischer, Jeison A; Zoldan, Vinícius C; Benitez, Guillermo; Rubert, Aldo A; Ramirez, Eduardo A; Carro, Pilar; Salvarezza, Roberto C; Pasa, André A; Vela, Maria E

    2012-10-30

    We have studied the adsorption of thioacetic acid (TAAH) on Au(111) from solution deposition. The close proximity of the SH groups to CO groups makes this molecule very attractive for exploring the effect of the functional group on the stability of the S-C and S-Au bonds. Although thioacetic acid was supposed to decompose slowly in water by hydrolysis supplying hydrogen sulfide, this behavior is not expected in nonpolar solvents such as toluene or hexane. Therefore, we have used these solvents for TAAH self-assembly on the Au(111) surface. The characterization of the adsorbates has been done by electrochemical techniques, X-ray photoelectron spectroscopy (XPS), and scanning tunneling microscopy (STM). We have found that even in nonpolar solvents thioacetic acid decomposes to S. The results have been discussed on the basis that the adsorbed species suffer a cleavage on the Au surface, leaving the S attached to it. The dissociation is a spontaneous process that reaches the final state very fast once it is energetically favorable, as can be interpreted from DFT calculations. The thioacetic acid adsorption reveals the strong effect that produces a functional group and the key role of the S-H bond cleavage in the self-assembly process. PMID:23002810

  16. Lewis acid-promoted hydrofluorination of alkynyl sulfides to generate α-fluorovinyl thioethers

    PubMed Central

    Bello, Davide

    2015-01-01

    Summary A new method for the preparation of α-fluorovinyl thioethers is reported which involves the hydrofluorination of alkynyl sulfides with 3HF·Et3N, a process that requires Lewis acid activation using BF3·Et2O and TiF4. The method gives access to a range of α-fluorovinyl thioethers, some in high stereoselectivity with the Z-isomer predominating over the E-isomer. The α-fluorovinyl thioether motif has prospects as a steric and electronic mimetic of thioester enols and enolates, important intermediates in enzymatic C–C bond forming reactions. The method opens access to appropriate analogues for investigations in this direction. PMID:26664609

  17. Thioredoxin and dihydrolipoic acid are required for 3-mercaptopyruvate sulfurtransferase to produce hydrogen sulfide.

    PubMed

    Mikami, Yoshinori; Shibuya, Norihiro; Kimura, Yuka; Nagahara, Noriyuki; Ogasawara, Yuki; Kimura, Hideo

    2011-11-01

    H2S (hydrogen sulfide) has recently been recognized as a signalling molecule as well as a cytoprotectant. We recently demonstrated that 3MST (3-mercaptopyruvate sulfurtransferase) produces H2S from 3MP (3-mercaptopyruvate). Although a reducing substance is required for an intermediate persulfide at the active site of 3MST to release H2S, the substance has not been identified. In the present study we show that Trx (thioredoxin) and DHLA (dihydrolipoic acid) associate with 3MST to release H2S. Other reducing substances, such as NADPH, NADH, GSH, cysteine and CoA, did not have any effect on the reaction. We also show that 3MST produces H2S from thiosulfate. The present study provides a new insight into a mechanism for the production of H2S by 3MST. PMID:21732914

  18. Low-cost silica, calcite and metal sulfide scale control through on-site production of sulfurous acid from H{sub 2}S or elemental sulfur

    SciTech Connect

    Gallup, D.L.; Kitz, K.

    1997-12-31

    UNOCAL Corporation currently utilizes brine pH modification technology to control scale deposition. Acids utilized in commercial operations include, sulfuric and hydrochloric. A new process reduces costs by producing acid on-site by burning hydrogen sulfide or elemental sulfur. Hydrogen sulfide in non-condensible gas emissions is reduced by oxidization to sulfurous acid. Brine or condensate is treated with sulfurous acid to control scale deposition, mitigate corrosion and improve gas partitioning in condensers.

  19. Microbial diversity at the moderate acidic stage in three different sulfidic mine tailings dumps generating acid mine drainage.

    PubMed

    Korehi, Hananeh; Blöthe, Marco; Schippers, Axel

    2014-11-01

    In freshly deposited sulfidic mine tailings the pH is alkaline or circumneutral. Due to pyrite or pyrrhotite oxidation the pH is dropping over time to pH values <3 at which acidophilic iron- and sulfur-oxidizing prokaryotes prevail and accelerate the oxidation processes, well described for several mine waste sites. The microbial communities at the moderate acidic stage in mine tailings are only scarcely studied. Here we investigated the microbial diversity via 16S rRNA gene sequence analysis in eight samples (pH range 3.2-6.5) from three different sulfidic mine tailings dumps in Botswana, Germany and Sweden. In total 701 partial 16S rRNA gene sequences revealed a divergent microbial community between the three sites and at different tailings depths. Proteobacteria and Firmicutes were overall the most abundant phyla in the clone libraries. Acidobacteria, Actinobacteria, Bacteroidetes, and Nitrospira occurred less frequently. The found microbial communities were completely different to microbial communities in tailings at

  20. Abiogenic and Microbial Controls on Volatile Fatty Acids in Precambrian Crustal Fracture Waters

    NASA Astrophysics Data System (ADS)

    McDermott, J. M.; Heuer, V.; Tille, S.; Moran, J.; Slater, G.; Sutcliffe, C. N.; Glein, C. R.; Hinrichs, K. U.; Sherwood Lollar, B.

    2015-12-01

    Saline fracture waters within the Precambrian Shield rocks of Canada and South Africa have been sequestered underground over geologic timescales up to 1.1-1.8 Ga [1, 2]. These fluids are rich in H2 derived from radiolysis and hydration of mafic and ultramafic rocks [1, 2, 3] and host a low-biomass, low-diversity microbial ecosystem at some sites [2]. The abiogenic or biogenic nature of geochemical processes has important implications for bioavailable carbon sources and the role played by abiotic organic synthesis in sustaining a chemosynthetic deep biosphere. Volatile fatty acids (VFAs) are simple carboxylic acids that may support microbial communities in such environments, such as those found in terrestrial [4] and deep-sea [5] hot springs. We present abundance and δ13C analysis for VFAs in a spectrum of Canadian Shield fluids characterized by varying dissolved H2, CH4, and C2+ n-alkane compositions. Isotope mass balance indicates that microbially mediated fermentation of carbon-rich graphitic sulfides may produce the elevated levels of acetate (39-273 μM) found in Birchtree and Thompson mine. In contrast, thermodynamic considerations and isotopic signatures of the notably higher acetate (1.2-1.9 mM), as well as formate and propionate abundances (371-816 μM and 20-38 μM, respectively) found at Kidd Creek mine suggest a role for abiogenic production via reduction of dissolved inorganic carbon with H2 for formate, and oxidation of C2+ n-alkanes for acetate and propionate, along with possible microbial cycling. VFAs comprise the bulk of dissolved and total organic carbon in the mines surveyed, and as such represent a potential key substrate for life. [1] Holland et al. (2013) Nature 497: 367-360. [2] Lin et al. (2006) Science 314: 479-482. [3] Sherwood Lollar et al. (2014) Nature 516: 379-382. [4] Windman et al. (2007) Astrobiology 7(6): 873-890. [5] Lang et al. (2010) Geochim. Cosmochim. Acta 92: 82-99.

  1. Effects of hops (Humulus lupulus L.) extract on volatile fatty acid production by rumen bacteria

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Aims: To determine the effects of hops extract, on in vitro volatile fatty acid (VFA) production by bovine rumen microorganisms. Methods and Results: When mixed rumen microbes were suspended in media containing carbohydrates, the initial rates of VFA production were suppressed by beta-acid rich hops...

  2. Bile-acid-activated farnesoid X receptor regulates hydrogen sulfide production and hepatic microcirculation

    PubMed Central

    Renga, Barbara; Mencarelli, Andrea; Migliorati, Marco; Distrutti, Eleonora; Fiorucci, Stefano

    2009-01-01

    AIM: To investigate whether the farnesoid X receptor (FXR) regulates expression of liver cystathionase (CSE), a gene involved in hydrogen sulfide (H2S) generation. METHODS: The regulation of CSE expression in response to FXR ligands was evaluated in HepG2 cells and in wild-type and FXR null mice treated with 6-ethyl chenodeoxycholic acid (6E-CDCA), a synthetic FXR ligand. The analysis demonstrated an FXR responsive element in the 5’-flanking region of the human CSE gene. The function of this site was investigated by luciferase reporter assays, chromatin immunoprecipitation and electrophoretic mobility shift assays. Livers obtained from rats treated with carbon tetrachloride alone, or in combination with 6-ethyl chenodeoxycholic acid, were studied for hydrogen sulphide generation and portal pressure measurement. RESULTS: Liver expression of CSE is regulated by bile acids by means of an FXR-mediated mechanism. Western blotting, qualitative and quantitative polymerase chain reaction, as well as immunohistochemical analysis, showed that expression of CSE in HepG2 cells and in mice is induced by treatment with an FXR ligand. Administration of 6E-CDCA to carbon tetrachloride treated rats protected against the down-regulation of CSE expression, increased H2S generation, reduced portal pressure and attenuated the endothelial dysfunction of isolated and perfused cirrhotic rat livers. CONCLUSION: These results demonstrate that CSE is an FXR-regulated gene and provide a new molecular explanation for the pathophysiology of portal hypertension. PMID:19418582

  3. Microbial contributions to coupled arsenic and sulfur cycling in the acid-sulfide hot spring Champagne Pool, New Zealand

    PubMed Central

    Hug, Katrin; Maher, William A.; Stott, Matthew B.; Krikowa, Frank; Foster, Simon; Moreau, John W.

    2014-01-01

    Acid-sulfide hot springs are analogs of early Earth geothermal systems where microbial metal(loid) resistance likely first evolved. Arsenic is a metalloid enriched in the acid-sulfide hot spring Champagne Pool (Waiotapu, New Zealand). Arsenic speciation in Champagne Pool follows reaction paths not yet fully understood with respect to biotic contributions and coupling to biogeochemical sulfur cycling. Here we present quantitative arsenic speciation from Champagne Pool, finding arsenite dominant in the pool, rim and outflow channel (55–75% total arsenic), and dithio- and trithioarsenates ubiquitously present as 18–25% total arsenic. In the outflow channel, dimethylmonothioarsenate comprised ≤9% total arsenic, while on the outflow terrace thioarsenates were present at 55% total arsenic. We also quantified sulfide, thiosulfate, sulfate and elemental sulfur, finding sulfide and sulfate as major species in the pool and outflow terrace, respectively. Elemental sulfur concentration reached a maximum at the terrace. Phylogenetic analysis of 16S rRNA genes from metagenomic sequencing revealed the dominance of Sulfurihydrogenibium at all sites and an increased archaeal population at the rim and outflow channel. Several phylotypes were found closely related to known sulfur- and sulfide-oxidizers, as well as sulfur- and sulfate-reducers. Bioinformatic analysis revealed genes underpinning sulfur redox transformations, consistent with sulfur speciation data, and illustrating a microbial role in sulfur-dependent transformation of arsenite to thioarsenate. Metagenomic analysis also revealed genes encoding for arsenate reductase at all sites, reflecting the ubiquity of thioarsenate and a need for microbial arsenate resistance despite anoxic conditions. Absence of the arsenite oxidase gene, aio, at all sites suggests prioritization of arsenite detoxification over coupling to energy conservation. Finally, detection of methyl arsenic in the outflow channel, in conjunction with

  4. Microbial contributions to coupled arsenic and sulfur cycling in the acid-sulfide hot spring Champagne Pool, New Zealand.

    PubMed

    Hug, Katrin; Maher, William A; Stott, Matthew B; Krikowa, Frank; Foster, Simon; Moreau, John W

    2014-01-01

    Acid-sulfide hot springs are analogs of early Earth geothermal systems where microbial metal(loid) resistance likely first evolved. Arsenic is a metalloid enriched in the acid-sulfide hot spring Champagne Pool (Waiotapu, New Zealand). Arsenic speciation in Champagne Pool follows reaction paths not yet fully understood with respect to biotic contributions and coupling to biogeochemical sulfur cycling. Here we present quantitative arsenic speciation from Champagne Pool, finding arsenite dominant in the pool, rim and outflow channel (55-75% total arsenic), and dithio- and trithioarsenates ubiquitously present as 18-25% total arsenic. In the outflow channel, dimethylmonothioarsenate comprised ≤9% total arsenic, while on the outflow terrace thioarsenates were present at 55% total arsenic. We also quantified sulfide, thiosulfate, sulfate and elemental sulfur, finding sulfide and sulfate as major species in the pool and outflow terrace, respectively. Elemental sulfur concentration reached a maximum at the terrace. Phylogenetic analysis of 16S rRNA genes from metagenomic sequencing revealed the dominance of Sulfurihydrogenibium at all sites and an increased archaeal population at the rim and outflow channel. Several phylotypes were found closely related to known sulfur- and sulfide-oxidizers, as well as sulfur- and sulfate-reducers. Bioinformatic analysis revealed genes underpinning sulfur redox transformations, consistent with sulfur speciation data, and illustrating a microbial role in sulfur-dependent transformation of arsenite to thioarsenate. Metagenomic analysis also revealed genes encoding for arsenate reductase at all sites, reflecting the ubiquity of thioarsenate and a need for microbial arsenate resistance despite anoxic conditions. Absence of the arsenite oxidase gene, aio, at all sites suggests prioritization of arsenite detoxification over coupling to energy conservation. Finally, detection of methyl arsenic in the outflow channel, in conjunction with

  5. Metal-Silicate-Sulfide Partitioning of U, Th, and K: Implications for the Budget of Volatile Elements in Mercury

    NASA Technical Reports Server (NTRS)

    Habermann, M.; Boujibar, A.; Righter, K.; Danielson, L.; Rapp, J.; Righter, M.; Pando, K.; Ross, D. K.; Andreasen, R.

    2016-01-01

    During formation of the solar system, the Sun produced strong solar winds, which stripped away a portion of the volatile elements from the forming planets. Hence, it was expected that planets closest to the sun, such as Mercury, are more depleted in volatile elements in comparison to other terrestrial planets. However, the MESSENGER mission detected higher than expected K/U and K/Th ratios on Mercury's surface, indicating a volatile content between that of Mars and Earth. Our experiments aim to resolve this discrepancy by experimentally determining the partition coefficients (D(sup met/sil)) of K, U, and Th between metal and silicate at varying pressure (1 to 5 GPa), temperature (1500 to 1900 C), oxygen fugacity (IW-2.5 to IW-6.5) and sulfur-content in the metal (0 to 33 wt%). Our data show that U, Th, and K become more siderophile with decreasing fO2 and increasing sulfur-content, with a stronger effect for U and Th in comparison to K. Using these results, the concentrations of U, Th, and K in the bulk planet were calculated for different scenarios, where the planet equilibrated at a fO2 between IW-4 and IW-7, assuming the existence of a FeS layer, between the core and mantle, with variable thickness. These models show that significant amounts of U and Th are partitioned into Mercury's core. The elevated superficial K/U and K/Th values are therefore only a consequence of the sequestration of U and Th into the core, not evidence of the overall volatile content of Mercury.

  6. Fatty acid composition and volatile compounds of caviar from farmed white sturgeon (Acipenser transmontanus).

    PubMed

    Caprino, Fabio; Moretti, Vittorio Maria; Bellagamba, Federica; Turchini, Giovanni Mario; Busetto, Maria Letizia; Giani, Ivan; Paleari, Maria Antonietta; Pazzaglia, Mario

    2008-06-01

    The present study was conducted to characterize caviar obtained from farmed white sturgeons (Acipenser transmontanus) subjected to different dietary treatments. Twenty caviar samples from fish fed two experimental diets containing different dietary lipid sources have been analysed for chemical composition, fatty acids and flavour volatile compounds. Fatty acid make up of caviar was only minimally influenced by dietary fatty acid composition. Irrespective of dietary treatments, palmitic acid (16:0) and oleic acid (OA, 18:1 n-9) were the most abundant fatty acid followed by docosahexaenoic acid (DHA, 22:6 n-3) and eicopentaenoic (EPA, 20:5 n-3). Thirty-three volatile compounds were isolated using simultaneous distillation-extraction (SDE) and identified by GC-MS. The largest group of volatiles were represented by aldehydes with 20 compounds, representing the 60% of the total volatiles. n-Alkanals, 2-alkenals and 2,4-alkadienals are largely the main responsible for a wide range of flavours in caviar from farmed white surgeon. PMID:18486649

  7. Effects of ascorbic acid and antioxidants on color, lipid oxidation and volatiles of irradiated ground beef

    NASA Astrophysics Data System (ADS)

    Ahn, D. U.; Nam, K. C.

    2004-09-01

    Beef loins with 3 different aging times after slaughter were ground, added with none, 0.1% ascorbic acid, 0.01% sesamol+0.01% α-tocopherol, or 0.1% ascorbic acid+0.01% sesamol+0.01% tocopherol. The meats were packaged in oxygen-permeable bags, irradiated at 2.5 kGy, and color, oxidation-reduction potential (ORP), lipid oxidation and volatile profiles were determined. Irradiation decreased the redness of ground beef, and visible color of beef changed from a bright red to a green/brown depending on the age of meat. Addition of ascorbic acid prevented color changes in irradiated beef, and the effect of ascorbic acid became greater as the age of meat or storage time after irradiation increased. The ground beef added with ascorbic acid had lower ORP than control, and the low ORP of meat helped maintaining the heme pigments in reduced form. During aerobic storage, S-volatiles disappeared while volatile aldehydes significantly increased in irradiated beef. Addition of ascorbic acid at 0.1% or sesamol+α-tocopherol at each 0.01% level to ground beef prior to irradiation were effective in reducing lipid oxidation and S-volatiles. As storage time increased, however, the antioxidant effect of sesamol+tocopherol in irradiated ground beef was superior to that of ascorbic acid.

  8. Evidence of Bronsted acidity on sulfided promoted and unpromoted Mo/Al sub 2 O sub 3 catalysts

    SciTech Connect

    Topsoe, N.Y.; Topsoe, H. ); Massoth, F.E. )

    1989-09-01

    It is uncertain what effect acidity, especially protonic (Bronsted) acidity, has on typical hydrotreating reactions over molybdenum-containing, sulfided catalysts. In a study of the hydrogenation of 1-hexene, small amounts of propylene were found together with the major product, hexane. The amount of the former increased with increase in the H{sub 2}S partial pressure, leading to the supposition that H{sub 2}S increased the Bronsted acidity of the sulfided catalyst. The hydrodenitrogenation of quinoline was also found to be promoted by H{sub 2}S, which was attributed to an increase in the number of Bronsted acid sites. However, no direct evidence for the presence of Bronsted acid sites was obtained. One of the advantages of using pyridine as the probe molecule for monitoring acidity is that it can adsorb both as coordinated and protonated pyridine on Lewis and Bronsted acid sites, respectively. These adsorbed pyridine species can be easily distinguished by infrared spectroscopy. Bronsted and Lewis acid sites have been detected for oxidic promoted and unpromoted Mo/Al{sub 2}/O{sub 3} catalysts but only Lewis acidity has been found on the corresponding sulfided catalysts. It should be pointed out that most of the previous IR studies have been carried out with pyridine adsorption at relatively low temperatures (below 423 K). It occurred to the authors that since the Bronsted acidity, if it exists, must be weak, higher temperatures may be required to produce the pyridinium ion. The present not reports IR evidence of Bronsted acidity at elevated temperatures corresponding to those typically employed under hydroprocessing reactions.

  9. Lewis-Acid/Base Effects on Gallium Volatility in Molten Chlorides

    SciTech Connect

    Williams, D.F.

    2001-02-26

    It has been proposed that GaCl{sub 3} can be removed by direct volatilization from a Pu-Ga alloy that is dissolved in a molten chloride salt. Although pure GaCl{sub 3} is quite volatile (boiling point, 201 C), the behavior of GaCl{sub 3} dissolved in chloride salts is different due to solution effects and is critically dependent on the composition of the solvent salt (i.e., its Lewis-acid/base character). In this report, the behavior of gallium in prototypical Lewis-acid and Lewis-base salts is compared. It was found that gallium volatility is suppressed in basic melts and enhanced in acidic melts. The implications of these results on the potential for simple gallium removal in molten salt systems are significant.

  10. Analysis of volatile components, fatty acids, and phytosterols of Abies koreana growing in Poland.

    PubMed

    Wajs-Bonikowska, Anna; Olejnika, Karol; Bonikowski, Radosław; Banaszczakb, Piotr

    2013-09-01

    Extracts and essential oils from seeds as well as essential oils from cone scales and needles with twigs of the Abies koreana population were studied. An analysis of Korean fir essential oils allowed us to determine 147 volatile compounds. The identified compounds constituted 97-99% of the seed, cone and needle oils. The main volatile in the seed and needle oils was limonene (56.6% and 23.4%, respectively), while the predominant volatile in cone oils was alpha-pinene (51.2%). Korean fir seeds provided a rich source of both essential oil (3.8-8.5%) and extract, which was isolated with a 24.5% yield and contained numerous groups of fatty acids and phytosterols (414 microg/100g extract). The most prominent fatty acids were unsaturated, among which linoleic (41.2%) and oleic (31.2%) fatty acid were the main ones while the dominant sterols were isomers of ergostadienol and beta-sitosterol. A. koreana seeds, cones and needles are a source of many volatile bioactive compounds while the seed extract, with a pleasant scent, contained not only volatiles, but also fractions rich in fatty acids and phytosterols. These facts make A. koreana essential oils and especially the seed extract potential components of cosmetics. PMID:24273870

  11. Reaction of Hydrogen Sulfide with Disulfide and Sulfenic Acid to Form the Strongly Nucleophilic Persulfide.

    PubMed

    Cuevasanta, Ernesto; Lange, Mike; Bonanata, Jenner; Coitiño, E Laura; Ferrer-Sueta, Gerardo; Filipovic, Milos R; Alvarez, Beatriz

    2015-11-01

    Hydrogen sulfide (H2S) is increasingly recognized to modulate physiological processes in mammals through mechanisms that are currently under scrutiny. H2S is not able to react with reduced thiols (RSH). However, H2S, more precisely HS(-), is able to react with oxidized thiol derivatives. We performed a systematic study of the reactivity of HS(-) toward symmetric low molecular weight disulfides (RSSR) and mixed albumin (HSA) disulfides. Correlations with thiol acidity and computational modeling showed that the reaction occurs through a concerted mechanism. Comparison with analogous reactions of thiolates indicated that the intrinsic reactivity of HS(-) is 1 order of magnitude lower than that of thiolates. In addition, H2S is able to react with sulfenic acids (RSOH). The rate constant of the reaction of H2S with the sulfenic acid formed in HSA was determined. Both reactions of H2S with disulfides and sulfenic acids yield persulfides (RSSH), recently identified post-translational modifications. The formation of this derivative in HSA was determined, and the rate constants of its reactions with a reporter disulfide and with peroxynitrite revealed that persulfides are better nucleophiles than thiols, which is consistent with the α effect. Experiments with cells in culture showed that treatment with hydrogen peroxide enhanced the formation of persulfides. Biological implications are discussed. Our results give light on the mechanisms of persulfide formation and provide quantitative evidence for the high nucleophilicity of these novel derivatives, setting the stage for understanding the contribution of the reactions of H2S with oxidized thiol derivatives to H2S effector processes. PMID:26269587

  12. A Binary Host Plant Volatile Lure Combined With Acetic Acid to Monitor Codling Moth (Lepidoptera: Tortricidae).

    PubMed

    Knight, A L; Basoalto, E; Katalin, J; El-Sayed, A M

    2015-10-01

    Field studies were conducted in the United States, Hungary, and New Zealand to evaluate the effectiveness of septa lures loaded with ethyl (E,Z)-2,4-decadienoate (pear ester) and (E)-4,8-dimethyl-1,3,7-nonatriene (nonatriene) alone and in combination with an acetic acid co-lure for both sexes of codling moth, Cydia pomonella (L.). Additional studies were conducted to evaluate these host plant volatiles and acetic acid in combination with the sex pheromone, (E,E)-8,10-dodecadien-1-ol (codlemone). Traps baited with pear ester/nonatriene + acetic acid placed within orchards treated either with codlemone dispensers or left untreated caught significantly more males, females, and total moths than similar traps baited with pear ester + acetic acid in some assays. Similarly, traps baited with codlemone/pear ester/nonatriene + acetic acid caught significantly greater numbers of moths than traps with codlemone/pear ester + acetic acid lures in some assays in orchards treated with combinational dispensers (dispensers loaded with codlemone/pear ester). These data suggest that monitoring of codling moth can be marginally improved in orchards under variable management plans using a binary host plant volatile lure in combination with codlemone and acetic acid. These results are likely to be most significant in orchards treated with combinational dispensers. Significant increases in the catch of female codling moths in traps with the binary host plant volatile blend plus acetic acid should be useful in developing more effective mass trapping strategies. PMID:26314018

  13. Cadmium sulfide quantum dots stabilized by castor oil and ricinoleic acid

    NASA Astrophysics Data System (ADS)

    Kyobe, Joseph William; Mubofu, Egid Beatus; Makame, Yahya M. M.; Mlowe, Sixberth; Revaprasadu, Neerish

    2016-02-01

    Castor oil and ricinoleic acid (an isolate of castor oil) are environmentally friendly bio-based organic surfactants that have been used as capping agents to prepare nearly spherical cadmium sulfide quantum dots (QDs) at 230, 250 and 280 °C. The prepared quantum dots were characterized by Ultra violet-visible (UV-vis), Photoluminescence (PL), Transmission Electron Microscopy (TEM), High Resolution Transmission Electron Microscopy (HRTEM) and X-ray diffraction (XRD) giving an overall CdS QDs average size of 5.14±0.39 nm. The broad XRD pattern and crystal lattice fringes in the HRTEM images showed a hexagonal phase composition of the CdS QDs. The calculated/estimated average size of the prepared castor oil capped CdS QDs for various techniques were 4.64 nm (TEM), 4.65 nm (EMA), 5.35 nm (UV-vis) and 6.46 nm (XRD). For ricinoleic acid capped CdS QDs, the average sizes were 5.56 nm (TEM), 4.78 nm (EMA), 5.52 nm (UV-vis) and 8.21 nm (XRD). Optical properties of CdS QDs showed a change of band gap energy from its bulk band gap of 2.42-2.82 eV due to quantum size confinement effect for temperature range of 230-280 °C. Similarly, a blue shift was observed in the photoluminescence spectra. Scanning electron microscope (SEM) observations show that the as-synthesized CdS QDs structures are spherical in shape. Fourier transform infra-red (FTIR) studies confirms the formation of castor oil and ricinoleic acid capped CdS QDs.

  14. Expanding the modular ester fermentative pathways for combinatorial biosynthesis of esters from volatile organic acids.

    PubMed

    Layton, Donovan S; Trinh, Cong T

    2016-08-01

    Volatile organic acids are byproducts of fermentative metabolism, for example, anaerobic digestion of lignocellulosic biomass or organic wastes, and are often times undesired inhibiting cell growth and reducing directed formation of the desired products. Here, we devised a general framework for upgrading these volatile organic acids to high-value esters that can be used as flavors, fragrances, solvents, and biofuels. This framework employs the acid-to-ester modules, consisting of an AAT (alcohol acyltransferase) plus ACT (acyl CoA transferase) submodule and an alcohol submodule, for co-fermentation of sugars and organic acids to acyl CoAs and alcohols to form a combinatorial library of esters. By assembling these modules with the engineered Escherichia coli modular chassis cell, we developed microbial manufacturing platforms to perform the following functions: (i) rapid in vivo screening of novel AATs for their catalytic activities; (ii) expanding combinatorial biosynthesis of unique fermentative esters; and (iii) upgrading volatile organic acids to esters using single or mixed cell cultures. To demonstrate this framework, we screened for a set of five unique and divergent AATs from multiple species, and were able to determine their novel activities as well as produce a library of 12 out of the 13 expected esters from co-fermentation of sugars and (C2-C6) volatile organic acids. We envision the developed framework to be valuable for in vivo characterization of a repertoire of not-well-characterized natural AATs, expanding the combinatorial biosynthesis of fermentative esters, and upgrading volatile organic acids to high-value esters. Biotechnol. Bioeng. 2016;113: 1764-1776. © 2016 Wiley Periodicals, Inc. PMID:26853081

  15. Development of sensitive and selective food sensors using new Re(I)-Pt(II) bimetallic complexes to detect volatile biogenic sulfides formed by meat spoilage.

    PubMed

    Chow, Cheuk-Fai; Ho, Pui-Yu; Sun, Dong; Lu, Yu-Jing; Wong, Wing-Leung; Tang, Qian; Gong, Cheng-Bin

    2017-02-01

    Detection of volatile biogenic sulfides (VBS) plays a crucial role in food safety because the amounts of these compounds can reflect the freshness of meat. A new indicator-displacement assay with Re(I)-Pt(II) complexes, [Re(Lig)(CO)3(bridge)]-[Pt(DMSO)(Cl)2] (1: Lig=5-phenyl-1,10-phenanthroline and bridge=NCS(-); 2: Lig=5-phenyl-1,10-phenanthroline and bridge=CN(-); 3: Lig=2,2'-biquinoline and bridge=NCS(-)), was demonstrated to be a very effective sensing method to VBS. The results indicated that the control of Re(I)-bridge-Pt(II) and Re(I)-ligand combination are able to regulate their sensing selectivity and sensitivity. This system was successfully applied to detect CH3SCH3 in real rotten pork with a linear luminometric response up to 20.0mgkg(-1) (R=0.997) with the detection limit as 0.05 mgkg(-1). Complex 1 also gave comparable results on the detection of VBS with respect to those determined by GCMS with recovery range from 76% to 102% (RSD%=13.8). PMID:27596434

  16. Determination of volatile fatty acids in landfill leachates by ion-exclusion chromatography.

    PubMed

    Yamamoto, Atsushi; Yasuhara, Akio; Kodama, Shuji; Matsunaga, Akinobu; Suzuki, Shigeru; Mohri, Shino; Yamada, Masato

    2004-03-01

    An ion-exclusion chromatographic method with on-line desalinization for the determination of volatile fatty acids in landfill leachates is described. Highly sensitive conductivity detection of the organic acids was achieved by using dilute p-hydroxybenzoic acid solution as an eluent. Interference with mineral acids was reduced by treatment with barium chloride solution prior to desalinization. A silver-loaded cation-exchange guard column for the desalinization was installed in series with the analytical column to avoid the contamination of organic acids. This method features detection limits of 0.01 mg L(-1) formic acid, 0.02 mg L(-1) acetic acid, 0.05 mg L(-1) propionic acid, and 0.1 mg L(-1) butyric acid, respectively, with an injection of 20 microL sample. Application of the on-line desalinization LC method is illustrated for leachate samples from a Japanese sanitary landfill. PMID:15334921

  17. Volatilization of iodine from nitric acid using peroxide

    DOEpatents

    Cathers, G.I.; Shipman, C.J.

    1975-10-21

    A method for removing radioactive iodine from nitric acid solution by adding hydrogen peroxide to the solution while concurrently holding the solution at the boiling point and distilling hydrogen iodide from the solution is reported.

  18. Characterisation of calamansi (Citrus microcarpa). Part I: volatiles, aromatic profiles and phenolic acids in the peel.

    PubMed

    Cheong, Mun Wai; Chong, Zhi Soon; Liu, Shao Quan; Zhou, Weibiao; Curran, Philip; Bin Yu

    2012-09-15

    Volatile compounds in the peel of calamansi (Citrus microcarpa) from Malaysia, the Philippines and Vietnam were extracted with dichloromethane and hexane, and then analysed by gas chromatography-mass spectroscopy/flame ionisation detector. Seventy-nine compounds representing >98% of the volatiles were identified. Across the three geographical sources, a relatively small proportion of potent oxygenated compounds was significantly different, exemplified by the highest amount of methyl N-methylanthranilate in Malaysian calamansi peel. Principal component analysis and canonical discriminant analysis were applied to interpret the complex volatile compounds in the calamansi peel extracts, and to verify the discrimination among the different origins. In addition, four common hydroxycinnamic acids (caffeic, p-coumaric, ferulic and sinapic acids) were determined in the methanolic extracts of calamansi peel using ultra-fast liquid chromatography coupled to photodiode array detector. The Philippines calamansi peel contained the highest amount of total phenolic acids. In addition, p-Coumaric acid was the dominant free phenolic acids, whereas ferulic acid was the main bound phenolic acid. PMID:23107679

  19. Interaction of volatiles, sugars and acids on perception of tomato aroma and flavor descriptors

    Technology Transfer Automated Retrieval System (TEKTRAN)

    To better understand the effect of sugars and acid levels on perception of aroma volatiles, intensity of tomato characteristic earthy/medicinal/musty, green/grassy/viny and fruity/floral aroma and flavor descriptors were evaluated using coarsely choped partially deodorized tomato puree spiked with 1...

  20. Total volatile fatty acid concentrations are unreliable estimators of treatment effects on ruminal fermentation in vivo

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Volatile fatty acid concentrations ([VFA], mM) have long been used to assess impact of dietary treatments on ruminal fermentation in vivo. However, discrepancies in statistical results between VFA and VFA pool size (VFAmol), possibly related to ruminal digesta liquid amount (LIQ, kg), suggest issues...

  1. Reducing ammonia emissions and volatile fatty acids in poultry litter with liquid aluminum chloride

    Technology Transfer Automated Retrieval System (TEKTRAN)

    This study was a pen trial in which the effects of adding different rates of liquid aluminum chloride (AlCl3) on litter pH, total volatile fatty acids (VFAs), and ammonia (NH3) fluxes was evaluated. Liquid AlCl3 treatments used in this study were sprayed on the rice hull surface at rates of 100 g, 2...

  2. Relationship of soluble solids, acidity and aroma volatiles to flavor in late-season navel oranges

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Navel orange flavor development during early fruit maturation is strongly dependent on changes in soluble solids concentration (SSC) and titratable acidity (TA), while later in the season other factors, such as aroma volatiles, also become important. The flavor of individual oranges can differ gre...

  3. Optimization of Sulfide/Sulfite Pretreatment of Lignocellulosic Biomass for Lactic Acid Production

    PubMed Central

    Adnan, Ahmad; Qureshi, Fahim Ashraf

    2013-01-01

    Potential of sodium sulfide and sodium sulfite, in the presence of sodium hydroxide was investigated to pretreat the corncob (CC), bagasse (BG), water hyacinth and rice husk (RH) for maximum digestibility. Response Surface Methodology was employed for the optimization of pretreatment factors such as temperature, time and concentration of Na2S and Na2SO3, which had high coefficient of determination (R2) along with low probability value (P), indicating the reliable predictability of the model. At optimized conditions, Na2S and Na2SO3 remove up to 97% lignin, from WH and RH, along with removal of hemicellulose (up to 93%) during pretreatment providing maximum cellulose, while in BG and CC; 75.0% and 90.0% reduction in lignin and hemicellulose was observed. Saccharification efficiency of RH, WH, BG and CC after treatment with 1.0% Na2S at 130°C for 2.3–3.0 h was 79.40, 85.93, 87.70, and 88.43%, respectively. WH treated with Na2SO3 showed higher hydrolysis yield (86.34%) as compared to Na2S while other biomass substrates showed 2.0–3.0% less yield with Na2SO3. Resulting sugars were evaluated as substrate for lactic acid production, yielding 26.48, 25.36, 31.73, and 30.31 gL−1 of lactic acid with 76.0, 76.0, 86.0, and 83.0% conversion yield from CC, BG, WH, and RH hydrolyzate, respectively. PMID:24058918

  4. Optimization of sulfide/sulfite pretreatment of lignocellulosic biomass for lactic acid production.

    PubMed

    Idrees, Muhammad; Adnan, Ahmad; Qureshi, Fahim Ashraf

    2013-01-01

    Potential of sodium sulfide and sodium sulfite, in the presence of sodium hydroxide was investigated to pretreat the corncob (CC), bagasse (BG), water hyacinth and rice husk (RH) for maximum digestibility. Response Surface Methodology was employed for the optimization of pretreatment factors such as temperature, time and concentration of Na₂S and Na₂SO₃, which had high coefficient of determination (R²) along with low probability value (P), indicating the reliable predictability of the model. At optimized conditions, Na₂S and Na₂SO₃ remove up to 97% lignin, from WH and RH, along with removal of hemicellulose (up to 93%) during pretreatment providing maximum cellulose, while in BG and CC; 75.0% and 90.0% reduction in lignin and hemicellulose was observed. Saccharification efficiency of RH, WH, BG and CC after treatment with 1.0% Na₂S at 130°C for 2.3-3.0 h was 79.40, 85.93, 87.70, and 88.43%, respectively. WH treated with Na₂SO₃ showed higher hydrolysis yield (86.34%) as compared to Na₂S while other biomass substrates showed 2.0-3.0% less yield with Na₂SO₃. Resulting sugars were evaluated as substrate for lactic acid production, yielding 26.48, 25.36, 31.73, and 30.31 gL⁻¹ of lactic acid with 76.0, 76.0, 86.0, and 83.0% conversion yield from CC, BG, WH, and RH hydrolyzate, respectively. PMID:24058918

  5. Biotreatment of refinery spent sulfidic caustics

    SciTech Connect

    Sublette, K.L.; Rajganesh, B.; Woolsey, M.; Plato, A.

    1995-12-31

    Caustics are used in petroleum refinering to remove hydrogen sulfide from various hydrocarbon streams. Spent sulfidic caustics from two Conoco refineries have been successfully biotreated on bench and pilot scale, resulting in neutralization and removal of active sulfides. Sulfides were completely oxidized to sulfate by Thiobacillus denitrificans. Microbial oxidation of sulfide produced acid, which at least partially neutralized the caustic.

  6. Acetic Acid Acts as a Volatile Signal To Stimulate Bacterial Biofilm Formation

    PubMed Central

    Chen, Yun; Gozzi, Kevin; Yan, Fang

    2015-01-01

    ABSTRACT Volatiles are small air-transmittable chemicals with diverse biological activities. In this study, we showed that volatiles produced by the bacterium Bacillus subtilis had a profound effect on biofilm formation of neighboring B. subtilis cells that grew in proximity but were physically separated. We further demonstrated that one such volatile, acetic acid, is particularly potent in stimulating biofilm formation. Multiple lines of genetic evidence based on B. subtilis mutants that are defective in either acetic acid production or transportation suggest that B. subtilis uses acetic acid as a metabolic signal to coordinate the timing of biofilm formation. Lastly, we investigated how B. subtilis cells sense and respond to acetic acid in regulating biofilm formation. We showed the possible involvement of three sets of genes (ywbHG, ysbAB, and yxaKC), all encoding putative holin-antiholin-like proteins, in cells responding to acetic acid and stimulating biofilm formation. All three sets of genes were induced by acetate. A mutant with a triple mutation of those genes showed a severe delay in biofilm formation, whereas a strain overexpressing ywbHG showed early and robust biofilm formation. Results of our studies suggest that B. subtilis and possibly other bacteria use acetic acid as a metabolic signal to regulate biofilm formation as well as a quorum-sensing-like airborne signal to coordinate the timing of biofilm formation by physically separated cells in the community. PMID:26060272

  7. Life in heaps: a review of microbial responses to variable acidity in sulfide mineral bioleaching heaps for metal extraction.

    PubMed

    Shiers, D W; Collinson, D M; Watling, H R

    2016-09-01

    Industrial heap leaching of low grade mineral sulfide ores is catalysed by the use of acidophilic microorganisms. These microorganisms obtain energy for growth from the oxidation of reduced inorganic or organic compounds, including soluble ferrous ion, reduced inorganic sulfur compounds (RISC) and acid-stable organic compounds. By-products of these oxidative processes, such as soluble ferric ion and sulfuric acid create favourable chemical conditions for leaching. This review is focused on the behaviour of common bioleaching microorganisms, their responses to changing pH in an industrial setting, and how both changes and microbial responses can impact the micro and macro environment. PMID:27283362

  8. Adsorption compared with sulfide precipitation as metal removal processes from acid mine drainage in a constructed wetland

    NASA Astrophysics Data System (ADS)

    Machemer, Steven D.; Wildeman, Thomas R.

    1992-01-01

    Metal removal processes from acid mine drainage were studied in an experimental constructed wetland in the Idaho Springs-Central City mining district of Colorado. The wetland was designed to passively remove heavy metals from the mine drainage flowing from the Big Five Tunnel. Concurrent studies were performed in the field on the waters flowing from the wetland and in the laboratory on the wetland substrate. Both studies suggest that there is competition for organic adsorption sites among Fe, Cu, Zn and Mn. Iron and Cu appear to be more strongly adsorbed than Zn and Mn. The adsorption of metals varies with the fluctuation of pH in the outflow water. Also indicated by field and laboratory studies is the microbial reduction of sulfate with a corresponding increase in the sulfide concentration of the water. As sulfide is generated. Cu and Zn are completely removed. The field results suggest that upon start up of a constructed wetland, the adsorption of dissolved metals onto organic sites in the substrate material will be an important process. Over time, sulfide precipitation becomes the dominant process for metal removal from acid mine drainage.

  9. Competitive Oxidation of Volatile Fatty Acids by Sulfate- and Nitrate-Reducing Bacteria from an Oil Field in Argentina▿ †

    PubMed Central

    Grigoryan, Aleksandr A.; Cornish, Sabrina L.; Buziak, Brenton; Lin, Shiping; Cavallaro, Adriana; Arensdorf, Joseph J.; Voordouw, Gerrit

    2008-01-01

    Acetate, propionate, and butyrate, collectively referred to as volatile fatty acids (VFA), are considered among the most important electron donors for sulfate-reducing bacteria (SRB) and heterotrophic nitrate-reducing bacteria (hNRB) in oil fields. Samples obtained from a field in the Neuquén Basin, western Argentina, had significant activity of mesophilic SRB, hNRB, and nitrate-reducing, sulfide-oxidizing bacteria (NR-SOB). In microcosms, containing VFA (3 mM each) and excess sulfate, SRB first used propionate and butyrate for the production of acetate, which reached concentrations of up to 12 mM prior to being used as an electron donor for sulfate reduction. In contrast, hNRB used all three organic acids with similar kinetics, while reducing nitrate to nitrite and nitrogen. Transient inhibition of VFA-utilizing SRB was observed with 0.5 mM nitrite and permanent inhibition with concentrations of 1 mM or more. The addition of nitrate to medium flowing into an upflow, packed-bed bioreactor with an established VFA-oxidizing SRB consortium led to a spike of nitrite up to 3 mM. The nitrite-mediated inhibition of SRB led, in turn, to the transient accumulation of up to 13 mM of acetate. The complete utilization of nitrate and the incomplete utilization of VFA, especially propionate, and sulfate indicated that SRB remained partially inhibited. Hence, in addition to lower sulfide concentrations, an increase in the concentration of acetate in the presence of sulfate in waters produced from an oil field subjected to nitrate injection may indicate whether the treatment is successful. The microbial community composition in the bioreactor, as determined by culturing and culture-independent techniques, indicated shifts with an increasing fraction of nitrate. With VFA and sulfate, the SRB genera Desulfobotulus, Desulfotignum, and Desulfobacter as well as the sulfur-reducing Desulfuromonas and the NR-SOB Arcobacter were detected. With VFA and nitrate, Pseudomonas spp. were

  10. Effect of Boric Acid on Volatile Products of Thermooxidative Degradation of Epoxy Polymers

    NASA Astrophysics Data System (ADS)

    Nazarenko, O. B.; Bukhareva, P. B.; Melnikova, T. V.; Visakh, P. M.

    2016-01-01

    The polymeric materials are characterized by high flammability. The use of flame retardants in order to reduce the flammability of polymers can lead to the formation of toxic gaseous products under fire conditions. In this work we studied the effect of boric acid on the volatile products of thermooxidative degradation of epoxy polymers. The comparative investigations were carried out on the samples of the unfilled epoxy resin and epoxy resin filled with a boric acid at percentage 10 wt. %. The analysis of the volatile decomposition products and thermal stability of the samples under heating in an oxidizing medium was performed using a thermal mass-spectrometric analysis. It is found that the incorporation of boric acid into the polymer matrix increases the thermal stability of epoxy composites and leads to a reduction in the 2-2.7 times of toxic gaseous products

  11. Effect of pH on fecal recovery of energy derived from volatile fatty acids.

    PubMed

    Kien, C L; Liechty, E A

    1987-01-01

    We assessed the effect of pH on volatilization of short-chain fatty acids during lyophilization. Acetic, propionic, valeric, and butyric acids were added to a fecal homogenate in amounts sufficient to raise the energy density by 18-27%. Fecal homogenate samples were either acidified (pH 2.8-3.2), alkalinized (pH 7.9-8.7), or left unchanged (4.0-4.8) prior to lyophilization and subsequent bomb calorimetry. Alkalinizing the fecal samples prevented the 20% loss of energy derived from each of these volatile fatty acids observed in samples either acidified or without pH adjustment. These data suggest that in energy balance studies involving subjects with active colonic fermentation, fecal samples should be alkalinized prior to lyophilization and bomb calorimetry. PMID:3681570

  12. Arachidonic acid-dependent carbon-eight volatile synthesis from wounded liverwort (Marchantia polymorpha).

    PubMed

    Kihara, Hirotomo; Tanaka, Maya; Yamato, Katsuyuki T; Horibata, Akira; Yamada, Atsushi; Kita, Sayaka; Ishizaki, Kimitsune; Kajikawa, Masataka; Fukuzawa, Hideya; Kohchi, Takayuki; Akakabe, Yoshihiko; Matsui, Kenji

    2014-11-01

    Eight-carbon (C8) volatiles, such as 1-octen-3-ol, octan-3-one, and octan-3-ol, are ubiquitously found among fungi and bryophytes. In this study, it was found that the thalli of the common liverwort Marchantia polymorpha, a model plant species, emitted high amounts of C8 volatiles mainly consisting of (R)-1-octen-3-ol and octan-3-one upon mechanical wounding. The induction of emission took place within 40min. In intact thalli, 1-octen-3-yl acetate was the predominant C8 volatile while tissue disruption resulted in conversion of the acetate to 1-octen-3-ol. This conversion was carried out by an esterase showing stereospecificity to (R)-1-octen-3-yl acetate. From the transgenic line of M. polymorpha (des6(KO)) lacking arachidonic acid and eicosapentaenoic acid, formation of C8 volatiles was only minimally observed, which indicated that arachidonic and/or eicosapentaenoic acids were essential to form C8 volatiles in M. polymorpha. When des6(KO) thalli were exposed to the vapor of 1-octen-3-ol, they absorbed the alcohol and converted it into 1-octen-3-yl acetate and octan-3-one. Therefore, this implied that 1-octen-3-ol was the primary C8 product formed from arachidonic acid, and further metabolism involving acetylation and oxidoreduction occurred to diversify the C8 products. Octan-3-one was only minimally formed from completely disrupted thalli, while it was formed as the most abundant product in partially disrupted thalli. Therefore, it is assumed that the remaining intact tissues were involved in the conversion of 1-octen-3-ol to octan-3-one in the partially disrupted thalli. The conversion was partly promoted by addition of NAD(P)H into the completely disrupted tissues, suggesting an NAD(P)H-dependent oxidoreductase was involved in the conversion. PMID:25174554

  13. Strong emissive nanofibers of organogels for the detection of volatile acid vapors.

    PubMed

    Xue, Pengchong; Sun, Jiabao; Yao, Boqi; Gong, Peng; Zhang, Zhenqi; Qian, Chong; Zhang, Yuan; Lu, Ran

    2015-03-16

    Two L-phenylalanine derivatives with 5,8-bis(2-(carbazol-3-yl)vinyl)quinoxaline (PCQ) and 5,8-bis[2-(carbazol-3-yl)]-2,3-dimethylquinoxaline (DCQ) as fluorophores were synthesized, and their photophysical properties were measured and compared. The two compounds were found to gelate some organic solvents and self-assemble into 1D nanofibers in gels. The wet gel of PCQ emitted a weak orange fluorescence, but the DCQ gel had a strong green one. This result can be due to the presence of two methyl groups and the nonplanar conformation of fluorophore in DCQ. The gel film of DCQ also showed significantly stronger fluorescence than that of PCQ. Thus, the wet gel and xerogel film of DCQ were selected to study their sensing properties to acids. The yellow wet gel of DCQ transformed into a brown sol upon the addition of 0.2 equiv trifluoroacetic acid (TFA), accompanied by emission quenching. The xerogel film of DCQ rapidly responded to volatile acids, such as TFA, HCl, and HOAc. The fluorescence of the xerogel film was gradually quenched with increased concentration of volatile acid vapors. The fibrous film exhibited low detection limits for volatile acid. The detection limits of the thin films for TFA, HCl, and HOAc reached 43, 122, and 950 ppb, respectively. PMID:25393379

  14. Biomineralization of arsenate to arsenic sulfides is greatly enhanced at mildly acidic conditions.

    PubMed

    Rodriguez-Freire, Lucia; Sierra-Alvarez, Reyes; Root, Robert; Chorover, Jon; Field, James A

    2014-12-01

    Arsenic (As) is an important water contaminant due to its high toxicity and widespread occurrence. Arsenic-sulfide minerals (ASM) are formed during microbial reduction of arsenate (As(V)) and sulfate (SO4(2-)). The objective of this research is to study the effect of the pH on the removal of As due to the formation of ASM in an iron-poor system. A series of batch experiments was used to study the reduction of SO4(2-) and As(V) by an anaerobic biofilm mixed culture in a range of pH conditions (6.1-7.2), using ethanol as the electron donor. Total soluble concentrations and speciation of S and As were monitored. Solid phase speciation of arsenic was characterized by x-ray adsorption spectroscopy (XAS). A marked decrease of the total aqueous concentrations of As and S was observed in the inoculated treatments amended with ethanol, but not in the non-inoculated controls, indicating that the As-removal was biologically mediated. The pH dramatically affected the extent and rate of As removal, as well as the stoichiometric composition of the precipitate. The amount of As removed was 2-fold higher and the rate of the As removal was up to 17-fold greater at pH 6.1 than at pH 7.2. Stoichiometric analysis and XAS results confirmed the precipitate was composed of a mixture of orpiment and realgar, and the proportion of orpiment in the sample increased with increasing pH. The results taken as a whole suggest that ASM formation is greatly enhanced at mildly acidic pH conditions. PMID:25222328

  15. Quantitative Microbial Community Analysis of Three Different Sulfidic Mine Tailing Dumps Generating Acid Mine Drainage▿

    PubMed Central

    Kock, Dagmar; Schippers, Axel

    2008-01-01

    The microbial communities of three different sulfidic and acidic mine waste tailing dumps located in Botswana, Germany, and Sweden were quantitatively analyzed using quantitative real-time PCR (Q-PCR), fluorescence in situ hybridization (FISH), catalyzed reporter deposition-FISH (CARD-FISH), Sybr green II direct counting, and the most probable number (MPN) cultivation technique. Depth profiles of cell numbers showed that the compositions of the microbial communities are greatly different at the three sites and also strongly varied between zones of oxidized and unoxidized tailings. Maximum cell numbers of up to 109 cells g−1 dry weight were determined in the pyrite or pyrrhotite oxidation zones, whereas cell numbers in unoxidized tailings were significantly lower. Bacteria dominated over Archaea and Eukarya at all tailing sites. The acidophilic Fe(II)- and/or sulfur-oxidizing Acidithiobacillus spp. dominated over the acidophilic Fe(II)-oxidizing Leptospirillum spp. among the Bacteria at two sites. The two genera were equally abundant at the third site. The acidophilic Fe(II)- and sulfur-oxidizing Sulfobacillus spp. were generally less abundant. The acidophilic Fe(III)-reducing Acidiphilium spp. could be found at only one site. The neutrophilic Fe(III)-reducing Geobacteraceae as well as the dsrA gene of sulfate reducers were quantifiable at all three sites. FISH analysis provided reliable data only for tailing zones with high microbial activity, whereas CARD-FISH, Q-PCR, Sybr green II staining, and MPN were suitable methods for a quantitative microbial community analysis of tailings in general. PMID:18586975

  16. Biomineralization of Arsenate to Arsenic Sulfides is Greatly Enhanced at Mildly Acidic Conditions

    PubMed Central

    Rodriguez-Freire, Lucia; Sierra-Alvarez, Reyes; Root, Robert; Chorover, Jon; Field, James A.

    2014-01-01

    Arsenic (As) is an important water contaminant due to its high toxicity and widespread occurrence. Arsenic-sulfide minerals (ASM) are formed during microbial reduction of arsenate (AsV) and sulfate (SO42−). The objective of this research is to study the effect of the pH on the removal of As due to the formation of ASM in an iron-poor system. A series of batch experiments was used to study the reduction of SO42− and AsV by an anaerobic biofilm mixed culture in a range of pH conditions (6.1–7.2), using ethanol as the electron donor. Total soluble concentrations and speciation of S and As were monitored. Solid phase speciation of arsenic was characterized by x-ray adsorption spectroscopy (XAS). A marked decrease of the total aqueous concentrations of As and S was observed in the inoculated treatments amended with ethanol, but not in the non-inoculated controls, indicating that the As-removal was biologically mediated. The pH dramatically affected the extent and rate of As removal, as well as the stoichiometric composition of the precipitate. The amount of As removed was 2-fold higher and the rate of the As removal was up to 17-fold greater at pH 6.1 than at pH 7.2. Stoichiometric analysis and XAS results confirmed the precipitate was composed of a mixture of orpiment and realgar, and the proportion of orpiment in the sample increased with increasing pH. The results taken as a whole suggest that ASM formation is greatly enhanced at mildly acidic pH conditions. PMID:25222328

  17. Synthesis and characterization of poly(acrylic acid) stabilized cadmium sulfide quantum dots.

    PubMed

    Celebi, Serdar; Erdamar, A Koray; Sennaroglu, Alphan; Kurt, Adnan; Acar, Havva Yagci

    2007-11-01

    Cadmium sulfide (CdS) nanoparticles (NPs) capped with poly(acrylic acid) (PAA) were prepared in aqueous solutions from Cd(NO3)2 and Na2S. Influence of the COOH/Cd ratio (0.8-12.5), reaction pH (5.5 and 7.5), and PAA molecular weight (2100 and 5100 g/mol) on the particle size, colloidal stability, and photoluminescence were investigated. A Cd/S ratio of <1 causes ineffective passivization of the surface with the carboxylate and therefore results in a red shift of the absorption band and a significant drop in photoluminescence. Therefore, the Cd/S ratio was fixed at 1.1 for all experiments studying the mentioned variables. PAA coating provided excellent colloidal stability at a COOH/Cd ratio above 1. Absorption edges of PAA-coated CdS NPs are in the range of 460-508 nm. The size of the NPs increases slightly with increasing PAA molecular weight and COOH/Cd ratio at pH 7.5. It is demonstrated that there is a critical COOH/Cd ratio (1.5-2) that maximizes the photoluminescence intensity and quantum yield (QY, 17%). Above this critical ratio, which corresponds to smaller crystal sizes (3.7-4.1 nm) for each reaction set, the quantum yield decreases and the crystal size increases. Moreover, CdS NPs prepared at pH 7.5 have significantly higher QY and absorb at lower wavelengths in comparison with those prepared at pH 5.5. Luminescence quenching has not been observed over 8 months. PMID:17929960

  18. Quantitative microbial community analysis of three different sulfidic mine tailing dumps generating acid mine drainage.

    PubMed

    Kock, Dagmar; Schippers, Axel

    2008-08-01

    The microbial communities of three different sulfidic and acidic mine waste tailing dumps located in Botswana, Germany, and Sweden were quantitatively analyzed using quantitative real-time PCR (Q-PCR), fluorescence in situ hybridization (FISH), catalyzed reporter deposition-FISH (CARD-FISH), Sybr green II direct counting, and the most probable number (MPN) cultivation technique. Depth profiles of cell numbers showed that the compositions of the microbial communities are greatly different at the three sites and also strongly varied between zones of oxidized and unoxidized tailings. Maximum cell numbers of up to 10(9) cells g(-1) dry weight were determined in the pyrite or pyrrhotite oxidation zones, whereas cell numbers in unoxidized tailings were significantly lower. Bacteria dominated over Archaea and Eukarya at all tailing sites. The acidophilic Fe(II)- and/or sulfur-oxidizing Acidithiobacillus spp. dominated over the acidophilic Fe(II)-oxidizing Leptospirillum spp. among the Bacteria at two sites. The two genera were equally abundant at the third site. The acidophilic Fe(II)- and sulfur-oxidizing Sulfobacillus spp. were generally less abundant. The acidophilic Fe(III)-reducing Acidiphilium spp. could be found at only one site. The neutrophilic Fe(III)-reducing Geobacteraceae as well as the dsrA gene of sulfate reducers were quantifiable at all three sites. FISH analysis provided reliable data only for tailing zones with high microbial activity, whereas CARD-FISH, Q-PCR, Sybr green II staining, and MPN were suitable methods for a quantitative microbial community analysis of tailings in general. PMID:18586975

  19. Aromatic and volatile acid intermediates observed during anaerobic metabolism of lignin-derived oligomers

    SciTech Connect

    Colberg, P.J.; Young, L.Y.

    1985-02-01

    Anaerobic enrichment cultures acclimated for 2 years to use a /sup 14/C-labeled, lignin-derived substrate with a molecular weight of 600 as a sole source of carbon were characterized by capillary and packed column gas chromatography. After acclimation, several of the active methanogenic organisms were inhibited with 2-bromoethanesulfonic acid, which suppressed methane formation and enhanced accumulation of a series of metabolic intermediates. Volatile fatty acids levels in 2-bromoethansulfonic acid-amended cultures were 10 times greater than those in the uninhibited, methane-forming organisms with acetate as the predominant component. Furthermore, in the 2-bromoethanesulfonic acid-amended organisms, almost half of the original substrate carbon was metabolized to 10 monaromatic compounds, with the most appreciable quantities accumulated as cinnamic, benzoic, caffeic, vanillic, and ferulic acids. 2-Bromoethanesulfonic acid seemed to effectively block CH/sub 4/ formation in the anaerobic food chain, resulting in the observed buildup of volatile fatty acids and monoaromatic intermediates. Neither fatty acids nor aromatic compounds were detected in the oligolignol substrate before its metabolism, suggesting that these anaerobic organisms have the ability to mediate the cleavage of the ..beta..-aryl-ether bond, the most common intermonomeric linkage in lignin, with the subsequent release of the observed constituent aromatic monomers.

  20. Identification of the subsurface sulfide bodies responsible for acidity in Río Tinto source water, Spain

    NASA Astrophysics Data System (ADS)

    Gómez-Ortiz, David; Fernández-Remolar, David C.; Granda, Ángel; Quesada, Cecilio; Granda, Teresa; Prieto-Ballesteros, Olga; Molina, Antonio; Amils, Ricardo

    2014-04-01

    The acidic waters of the Río Tinto rise from several acidic springs that emerge in the area surrounding Peña de Hierro (Fernández-Remolar et al., 2005). These springs are located above minor normal faults that act as natural conduits for the water from the underlying deep aquifer. Although it has been suggested that the acidity of the river originates from the biooxidation of massive and stockwork sulfides (Fernández-Remolar et al., 2008a), the location of the source for these acidic solutions has not previously been established. This lack of evidence has been used to suggest that the acidity of the Río Tinto may be the product of the most conspicuous of the possible source, the extensive mining of the area over approximately the last 5000 years (Davis et al., 2000). In this paper, we report resistivity and time-domain electromagnetic sounding data from the Río Tinto aquifer to a depth of ∼600 m, revealing the locations for the acidic sources. Both types of data support the presence of two distinct geological units that we interpret as thrust sheets emplaced onto each other during the Variscan orogeny of the Carboniferous. These units, both of which contain massive and stockwork sulfides, act as the aquifer for the acidic waters of the Río Tinto. Under this scenario, which is in agreement with the geological record of the Río Tinto fluvial system for the past 6 Ma (Moreno et al., 2003), our results imply that mining activity had little influence on the generation of the acidic river waters.

  1. Effects of borax treatment on hydrogen sulfide emissions and sulfate reducing bacteria in stored swine manure

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Malodorous compounds and emissions produced from stored swine manure can pose both environmental and health issues. These nuisance odors largely result from compounds such as sulfides, volatile fatty acids, and phenols, which are produced as a result of anaerobic digestion of materials present in t...

  2. Antimicrobial Effects of Free Nitrous Acid on Desulfovibrio vulgaris: Implications for Sulfide-Induced Corrosion of Concrete.

    PubMed

    Gao, Shu-Hong; Ho, Jun Yuan; Fan, Lu; Richardson, David J; Yuan, Zhiguo; Bond, Philip L

    2016-09-15

    Hydrogen sulfide produced by sulfate-reducing bacteria (SRB) in sewers causes odor problems and asset deterioration due to the sulfide-induced concrete corrosion. Free nitrous acid (FNA) was recently demonstrated as a promising antimicrobial agent to alleviate hydrogen sulfide production in sewers. However, details of the antimicrobial mechanisms of FNA are largely unknown. Here, we report the multiple-targeted antimicrobial effects of FNA on the SRB Desulfovibrio vulgaris Hildenborough by determining the growth, physiological, and gene expression responses to FNA exposure. The activities of growth, respiration, and ATP generation were inhibited when exposed to FNA. These changes were reflected in the transcript levels detected during exposure. The removal of FNA was evident by nitrite reduction that likely involved nitrite reductase and the poorly characterized hybrid cluster protein, and the genes coding for these proteins were highly expressed. During FNA exposure, lowered ribosome activity and protein production were detected. Additionally, conditions within the cells were more oxidizing, and there was evidence of oxidative stress. Based on an interpretation of the measured responses, we present a model depicting the antimicrobial effects of FNA on D. vulgaris These findings provide new insight for understanding the responses of D. vulgaris to FNA and will provide a foundation for optimal application of this antimicrobial agent for improved control of sewer corrosion and odor management.IMPORTANCE Hydrogen sulfide produced by SRB in sewers causes odor problems and results in serious deterioration of sewer assets that requires very costly and demanding rehabilitation. Currently, there is successful application of the antimicrobial agent free nitrous acid (FNA), the protonated form of nitrite, for the control of sulfide levels in sewers (G. Jiang et al., Water Res 47:4331-4339, 2013, http://dx.doi.org/10.1016/j.watres.2013.05.024). However, the details of the

  3. Volatile fatty acids distribution during acidogenesis of algal residues with pH control.

    PubMed

    Li, Yan; Hua, Dongliang; Zhang, Jie; Zhao, Yuxiao; Xu, Haipeng; Liang, Xiaohui; Zhang, Xiaodong

    2013-06-01

    The anaerobic acidification of protein-rich algal residues with pH control (4, 6, 8, 10) was studied in batch reactors, which was operated at mesophilic(35 °C) condition. The distribution of major volatile fatty acids (VFAs) during acidogenesis was emphasized in this paper. The results showed that the acidification efficiency and VFAs distribution in the acid reactor strongly depended on the pH. The main product for all the runs involved acetic acid except that the proportion of butyric acid acidified at pH 6 was relatively higher. The other organic acids remained at lower levels. The VFAs yield reached the maximum value with about 0.6 g VFAs/g volatile solid (VS) added as pH was 8, and also the content of total ammonia nitrogen (TAN) reached the highest values of 9,629 mg/l. Low acidification degrees were obtained under the conditions at pH 4 and 10, which was not suitable for the metabolism of acidogens. Hydralic retention time (HRT) required for different conditions varied. As a consequence, it was indicated that pH was crucial to the acidification efficiency and products distribution. The investigation of acidogenesis process, which was producing the major substrates, short-chain fatty acids, would play the primary role in the efficient operation of methanogenesis. PMID:23381617

  4. Impact of undissociated volatile fatty acids on acidogenesis in a two-phase anaerobic system.

    PubMed

    Xiao, Keke; Zhou, Yan; Guo, Chenghong; Maspolim, Yogananda; Ng, Wun Jern

    2016-04-01

    This study investigated the degradation and production of volatile fatty acids (VFAs) in the acidogenic phase reactor of a two-phase anaerobic system. 20 mmol/L bromoethanesulfonic acid (BESA) was used to inhibit acidogenic methanogens (which were present in the acidogenic phase reactor) from degrading VFAs. The impact of undissociated volatile fatty acids (unVFAs) on "net" VFAs production in the acidogenic phase reactor was then evaluated, with the exclusion of concurrent VFAs degradation. "Net" VFAs production from glucose degradation was partially inhibited at high unVFAs concentrations, with 59%, 37% and 60% reduction in production rates at 2190 mg chemical oxygen demand (COD)/L undissociated acetic acid (unHAc), 2130 mg COD/L undissociated propionic acid (unHPr) and 2280 mg COD/L undissociated n-butyric acid (unHBu), respectively. The profile of VFAs produced further indicated that while an unVFA can primarily affect its own formation, there were also unVFAs that affected the formation of other VFAs. PMID:27090711

  5. The Salicylic Acid-Mediated Release of Plant Volatiles Affects the Host Choice of Bemisia tabaci.

    PubMed

    Shi, Xiaobin; Chen, Gong; Tian, Lixia; Peng, Zhengke; Xie, Wen; Wu, Qingjun; Wang, Shaoli; Zhou, Xuguo; Zhang, Youjun

    2016-01-01

    The whitefly Bemisia tabaci (Gennadius) (Hemiptera: Aleyrodidae) causes serious crop losses worldwide by transmitting viruses. We have previously shown that salicylic acid (SA)-related plant defenses directly affect whiteflies. In this study, we applied exogenous SA to tomato plants in order to investigate the interaction between SA-induced plant volatiles and nonviruliferous B. tabaci B and Q or B- and Q-carrying tomato yellow leaf curl virus (TYLCV). The results showed that exogenous SA caused plants to repel nonviruliferous whiteflies, but the effect was reduced when the SA concentration was low and when the whiteflies were viruliferous. Exogenous SA increased the number and quantity of plant volatiles-especially the quantity of methyl salicylate and δ-limonene. In Y-tube olfactometer assays, methyl salicylate and δ-limonene repelled the whiteflies, but the repellency was reduced for viruliferous Q. We suggest that the release of plant volatiles as mediated by SA affects the interaction between whiteflies, plants, and viruses. Further studies are needed to determine why viruliferous Q is less sensitive than nonviruliferous Q to repellent plant volatiles. PMID:27376280

  6. Determination of volatile fatty acids in wastewater by solvent extraction and gas chromatography

    NASA Astrophysics Data System (ADS)

    Mkhize, Nontando T.; Msagati, Titus A. M.; Mamba, Bhekie B.; Momba, Maggy

    The purpose of this study was to develop a liquid-liquid extraction method for the analysis of volatile fatty acids collected at the elutriation units of Unit 3, 4 and 5 at Johannesburg Water-Northern Works Wastewater Treatment Plant. Liquid-liquid extraction (LLE) method employing dichloromethane (DCM) and methyl-tert-butyl-ether (MTBE) as extracting solvents was used during the quantitative analysis of volatile fatty acids namely acetic, propionic, butyric, isobutyric, valeric, isovaleric and heptanoic acid. The detection of the extracts was by gas chromatography coupled to a mass spectrometer operating under electron ionization mode (GC-EI-MS). The results showed that MTBE was a better extraction solvent than DCM as it gave much higher recoveries (>5 folds). On the other hand, the overall reactor performance for all the three units in the period when the samples were collected, which was measured by the ratio of propionic to acetic acid was good since the ratio o did not exceed 1.4 with the exception of the samples collected on the 3rd of October where the ratio exceeded 1.4 significantly. The concentration of acetic acid, another indicator for the reactor performance in all three units was way below 800 mg/L thus the digester balance was on par.

  7. METABOLIC FUNCTION OF BRANCHED-CHAIN VOLATILE FATTY ACIDS, GROWTH FACTORS FOR RUMINOCOCCI II.

    PubMed Central

    Allison, M. J.; Bryant, M. P.; Katz, I.; Keeney, M.

    1962-01-01

    Allison, M. J. (Dairy Cattle Research Branch, USDA, Beltsville, Md.), M. P. Bryant, I. Katz, and M. Keeney. Metabolic function of branched-chain volatile fatty acids, growth factors for ruminococci. II. Biosynthesis of higher branched-chain fatty acids and aldehydes. J. Bacteriol. 83:1084–1093. 1962.—A number of strains of rumen bacteria require branched-chain volatile fatty acids for growth. A strain of Ruminococcus flavefaciens that requires either isovalerate or isobutyrate incorporates radioactive carbon from isovalerate-1-C14 and isovalerate-3-C14 into leucine and into the lipid fraction of the cells. Evidence obtained by both paper and gas chromatography indicated that most of the label in the lipid of cells grown in isovalerate-1-C14 was in a branched-chain 15-carbon fatty acid, with some in a 17-carbon acid; about 7.5% of the C14 was recovered in a branched-chain 15-carbon aldehyde. The aldehydes were in the phospholipid fraction and were presumably present as plasmalogen. A strain of R. albus was shown to require isobutyrate, 2-methyl-n-butyrate, or 2-ketoisovalerate for growth. This strain did not incorporate appreciable C14 from isovalerate-1-C14 or isovalerate-3-C14. When grown in a medium containing isobutyrate-1-C14, most of the cellular C14 was found in the lipid fraction. Analysis of the lipid demonstrated that the label was present mainly as branched-chain 14-carbon and 16-carbon fatty acids, with 11% of the C14 present in 14- and 16-carbon carbonyl compounds, presumably branched-chain aldehydes. Branched-chain 14-, 15-, and 16-carbon fatty acids are major components of the lipids of these rumen bacteria. The possibility that these acids and aldehydes, which are found in ruminant body and milk lipids, may be of microbial origin is discussed. PMID:13860622

  8. Influence of pasture-based feeding systems on fatty acids, organic acids and volatile organic flavour compounds in yoghurt.

    PubMed

    Akbaridoust, Ghazal; Plozza, Tim; Trenerry, V Craige; Wales, William J; Auldist, Martin J; Ajlouni, Said

    2015-08-01

    The influence of different pasture-based feeding systems on fatty acids, organic acids and volatile organic flavour compounds in yoghurt was studied. Pasture is the main source of nutrients for dairy cows in many parts of the world, including southeast Australia. Milk and milk products produced in these systems are known to contain a number of compounds with positive effects on human health. In the current study, 260 cows were fed supplementary grain and forage according to one of 3 different systems; Control (a traditional pasture based diet offered to the cows during milking and in paddock), PMR1 (a partial mixed ration which contained the same supplement as Control but was offered to the cows as a partial mixed ration on a feedpad), PMR 2 (a differently formulated partial mixed ration compared to Control and PMR1 which was offered to the cows on a feedpad). Most of the yoghurt fatty acids were influenced by feeding systems; however, those effects were minor on organic acids. The differences in feeding systems did not lead to the formation of different volatile organic flavour compounds in yoghurt. Yet, it did influence the relative abundance of these components. PMID:26143651

  9. Emissions of the natural acidic substance in the acid rain region: Dimethyl sulfide and hydrogen sulfide in the region of Xiamen, China

    SciTech Connect

    Yubao Wang; Miaoqin Lu

    1996-12-31

    The global anthropogenic emissions of sulfur, mainly SO2, are relatively well studied for most of the industrialized world, and relatively little is known to date about natural sulfur emission sources, such as, coastal waters and wetland. The most important atmospheric sulfur compounds originating from biogeochemical sources are DMS and H{sub 2}S. Previous studies suggest that biogenic DMS is mainly emitted from oceanic phytoplankton species. The global emission of sulfur by this process was estimated to be 40 Tg S/year. Major sources of biogenic H{sub 2}S in the atmosphere are believed to be bacterial sulfate reduction in anoxic soils and degradation of organic matter. The mentioned reduced sulfur compounds are partially oxidation in the troposphere to SO{sub 2} and further to sulfur acid, another strong acid produced from DMS oxidation is methane sulphonic acid (CH{sub 3}S(O{sub 2})OH). These compounds are strong acid and will influence the pH of precipitation and will be the important impact in acid rain phenomena.

  10. Effects of high pressure processing on fatty acid composition and volatile compounds in Korean native black goat meat.

    PubMed

    Kang, Geunho; Cho, Soohyun; Seong, Pilnam; Park, Beomyoung; Kim, Sangwoo; Kim, Donghun; Kim, Youngjun; Kang, Sunmun; Park, Kyoungmi

    2013-08-01

    This study investigated the effects of high pressure processing (HPP) on fatty acid composition and volatile compounds in Korean native black goat (KNBG) meat. Fatty acid content in KNBG meat was not significantly (p > 0.05) different among the control goats and those subjected HPP. The 9,12-octadecadienoic acid and octadecanoic acid, well-known causes of off-flavors, were detected from meat of some KNBG. A difference between the control and HPP treatment was observed in the discriminated function analysis using an electronic nose. The results suggest that the volatile compounds in KNBG meat were affected by HPP. PMID:23644220

  11. A malonitrile-functionalized metal-organic framework for hydrogen sulfide detection and selective amino acid molecular recognition

    PubMed Central

    Li, Haiwei; Feng, Xiao; Guo, Yuexin; Chen, Didi; Li, Rui; Ren, Xiaoqian; Jiang, Xin; Dong, Yuping; Wang, Bo

    2014-01-01

    A novel porous polymeric fluorescence probe, MN-ZIF-90, has been designed and synthesized for quantitative hydrogen sulfide (H2S) fluorescent detection and highly selective amino acid recognition. This distinct crystalline structure, derived from rational design and malonitrile functionalization, can trigger significant enhancement of its fluorescent intensity when exposed to H2S or cysteine molecules. Indeed this new metal-organic framework (MOF) structure shows high selectivity of biothiols over other amino acids and exhibits favorable stability. Moreover, in vitro viability assays on HeLa cells show low cytotoxicity of MN-ZIF-90 and its imaging contrast efficiency is further demonstrated by fluorescence microscopy studies. This facile yet powerful strategy also offers great potential of using open-framework materials (i.e. MOFs) as the novel platform for sensing and other biological applications. PMID:24621614

  12. Bioconversion of volatile fatty acids derived from waste activated sludge into lipids by Cryptococcus curvatus.

    PubMed

    Liu, Jia; Liu, Jia-Nan; Yuan, Ming; Shen, Zi-Heng; Peng, Kai-Ming; Lu, Li-Jun; Huang, Xiang-Feng

    2016-07-01

    Pure volatile fatty acid (VFA) solution derived from waste activated sludge (WAS) was used to produce microbial lipids as culture medium in this study, which aimed to realize the resource recovery of WAS and provide low-cost feedstock for biodiesel production simultaneously. Cryptococcus curvatus was selected among three oleaginous yeast to produce lipids with VFAs derived from WAS. In batch cultivation, lipid contents increased from 10.2% to 16.8% when carbon to nitrogen ratio increased from about 3.5 to 165 after removal of ammonia nitrogen by struvite precipitation. The lipid content further increased to 39.6% and the biomass increased from 1.56g/L to 4.53g/L after cultivation for five cycles using sequencing batch culture (SBC) strategy. The lipids produced from WAS-derived VFA solution contained nearly 50% of monounsaturated fatty acids, including palmitic acid, heptadecanoic acid, ginkgolic acid, stearic acid, oleic acid, and linoleic acid, which showed the adequacy of biodiesel production. PMID:27038264

  13. Neutralization/prevention of acid rock drainage using mixtures of alkaline by-products and sulfidic mine wastes.

    PubMed

    Alakangas, Lena; Andersson, Elin; Mueller, Seth

    2013-11-01

    Backfilling of open pit with sulfidic waste rock followed by inundation is a common method for reducing sulfide oxidation after mine closure. This approach can be complemented by mixing the waste rock with alkaline materials from pulp and steel mills to increase the system's neutralization potential. Leachates from 1 m3 tanks containing sulfide-rich (ca.30 wt %) waste rock formed under dry and water saturated conditions under laboratory conditions were characterized and compared to those formed from mixtures. The waste rock leachate produced an acidic leachate (pH<2) with high concentrations of As (65 mg/L), Cu (6 mg/L), and Zn (150 mg/L) after 258 days. The leachate from water-saturated waste rock had lower concentrations of As and Cu (<2 μg/L), Pb and Zn (20 μg/L and 5 mg/L), respectively, and its pH was around 6. Crushed (<6 mm) waste rock mixed with different fractions (1-5 wt %) of green liquid dregs, fly ash, mesa lime, and argon oxygen decarburization (AOD) slag was leached on a small scale for 65 day, and showed near-neutral pH values, except for mixtures of waste rock with AOD slag and fly ash (5% w/w) which were more basic (pH>9). The decrease of elemental concentration in the leachate was most pronounced for Pb and Zn, while Al and S were relatively high. Overall, the results obtained were promising and suggest that alkaline by-products could be useful additives for minimizing ARD formation. PMID:23740301

  14. Enhancement of volatile fatty acids production from rice straw via anaerobic digestion with chemical pretreatment.

    PubMed

    Park, Gwon Woo; Kim, Ilgook; Jung, Kwonsu; Seo, Charles; Han, Jong-In; Chang, Ho Nam; Kim, Yeu-Chun

    2015-08-01

    Rice straw is one of the most abundant renewable biomass sources and was selected as the feedstock for the production of volatile fatty acids (VFAs) from which microbial biodiesel can be produced. Two kinds of chemical pretreatments involving nitric acid and sodium hydroxide were investigated at 150 °C with 20 min of reaction time. The nitric acid pretreatment generated the most hemicellulose hydrolyzate, while significant reduction of the lignin occurred with sodium hydroxide pretreatment. Anaerobic digestion of 20 g/L rice straw yielded 6.00 and 7.09 g VFAs/L with 0.5% HNO3 and 2% NaOH, respectively. The VFAs yield with 2% NaOH was 0.35 g/g. PMID:25764527

  15. Structural, chemical and optical properties of the polyethylene-copper sulfide composite thin films synthesized using polythionic acid as sulfur source

    NASA Astrophysics Data System (ADS)

    Ancutiene, Ingrida; Navea, Juan G.; Baltrusaitis, Jonas

    2015-08-01

    Synthesis and properties of thin copper sulfide films deposited on polyethylene were explored for the development of low cost hybrid organic-inorganic photovoltaic materials. Polyethylene was used as a model organic host material for thin copper sulfide film formation. Adsorption-diffusion method was used which utilized consecutive exposure of polyethylene to polythionic acid followed by aqueous Cu(II/I) solution. Several crystalline copper sulfide phases were obtained in synthesized samples and elucidated using X-ray diffraction. Surface chemical composition determined using X-ray photoelectron spectroscopy showed the presence of copper sulfides in combination with copper hydroxide. Thickness of the composite material films ranged from several microns to ∼18 μm and depended on the Cu(II/I) exposure time. Bandgap of the materials obtained was measured and ranged from 1.88 to 1.17 eV. Importantly, heating these complex copper sulfide crystalline phase containing films at 100 °C in inert atmosphere invariably resulted in a single copper sulfide, anilite (Cu1.75S), phase. Anilite possesses a bandgap of 1.36 eV and has demonstrated excellent photovoltaic properties. Thus, the method described in this work can be used for a low cost large scale composite thin film photovoltaic material deposition based on anilite as photoactive material.

  16. Separation of boric acid from PWR waste by volatilization during evaporation

    SciTech Connect

    Bruggeman, A.; Braet, J.; Smaers, F.; De Regge, P.

    1997-01-01

    SCK{circ}CEN has developed a process to separate boric acid during and/or after evaporation of the liquid waste from pressurized light-water reactors. The key goal is to achieve higher waste volume reduction factors, while maintaining low activity discharge limits. An additional goal is to obtain purified boric acid for recycling. The process is based on the volatility of boric acid in steam. The liquid waste is treated in a semicontinuous evaporator, which operates preferentially at a higher temperature than the present evaporators. The stream loaded with boric acid is fed to a column for fractional condensation with partial reflux. In this way, one obtains a highly concentrated waste that contains all the radioactive and chemical impurities and little boron, a concentrated boric acid solution which can be reused, as well as a highly decontaminated effluent without boron. In case replacement or adaptation of existing evaporators is less practical, one can adapt the process for the treatment of evaporator concentrates. After having been intensively tested at SCK{circ}CEN, the process has recently been demonstrated in a small pilot installation and with realistic liquid waste, at the nuclear power station in Doel, Belgium. The results corresponded to the theoretical predictions. After a transitional period, the boron concentration in the evaporator no longer increased and consequently did not limit the achievable waste volume reduction factor. The boric acid was recovered from the steam and during a supplementary treatment additional boric acid from the waste concentrate was recovered.

  17. Strong Fluorescent Smart Organogel as a Dual Sensing Material for Volatile Acid and Organic Amine Vapors.

    PubMed

    Xue, Pengchong; Yao, Boqi; Wang, Panpan; Gong, Peng; Zhang, Zhenqi; Lu, Ran

    2015-11-23

    An L-phenylalanine derivative (C12PhBPCP) consisting of a strong emission fluorophore with benzoxazole and cyano groups is designed and synthesized to realize dual responses to volatile acid and organic amine vapors. The photophysical properties and self-assembly of the said derivative in the gel phase are also studied. C12PhBPCP can gelate organic solvents and self-assemble into 1 D nanofibers in the gels. UV/Vis absorption spectral results show H-aggregate formation during gelation, which indicates strong exciton coupling between fluorophores. Both wet gel and xerogel emit strong green fluorescence because the cyano group suppresses fluorescence quenching in the self-assemblies. Moreover, the xerogel film with strong green fluorescence can be used as a dual chemosensor for quantitative detection of volatile acid and organic amine vapors with fast response times and low detection limits owing to its large surface area and amplified fluorescence quenching. The detection limits are 796 ppt and 25 ppb for gaseous aniline and trifluoroacetic acid (TFA), respectively. PMID:26449736

  18. The Salicylic Acid-Mediated Release of Plant Volatiles Affects the Host Choice of Bemisia tabaci

    PubMed Central

    Shi, Xiaobin; Chen, Gong; Tian, Lixia; Peng, Zhengke; Xie, Wen; Wu, Qingjun; Wang, Shaoli; Zhou, Xuguo; Zhang, Youjun

    2016-01-01

    The whitefly Bemisia tabaci (Gennadius) (Hemiptera: Aleyrodidae) causes serious crop losses worldwide by transmitting viruses. We have previously shown that salicylic acid (SA)-related plant defenses directly affect whiteflies. In this study, we applied exogenous SA to tomato plants in order to investigate the interaction between SA-induced plant volatiles and nonviruliferous B. tabaci B and Q or B- and Q-carrying tomato yellow leaf curl virus (TYLCV). The results showed that exogenous SA caused plants to repel nonviruliferous whiteflies, but the effect was reduced when the SA concentration was low and when the whiteflies were viruliferous. Exogenous SA increased the number and quantity of plant volatiles—especially the quantity of methyl salicylate and δ-limonene. In Y-tube olfactometer assays, methyl salicylate and δ-limonene repelled the whiteflies, but the repellency was reduced for viruliferous Q. We suggest that the release of plant volatiles as mediated by SA affects the interaction between whiteflies, plants, and viruses. Further studies are needed to determine why viruliferous Q is less sensitive than nonviruliferous Q to repellent plant volatiles. PMID:27376280

  19. High throughput volatile fatty acid skin metabolite profiling by thermal desorption secondary electrospray ionisation mass spectrometry.

    PubMed

    Martin, Helen J; Reynolds, James C; Riazanskaia, Svetlana; Thomas, C L Paul

    2014-09-01

    The non-invasive nature of volatile organic compound (VOC) sampling from skin makes this a priority in the development of new screening and diagnostic assays. Evaluation of recent literature highlights the tension between the analytical utility of ambient ionisation approaches for skin profiling and the practicality of undertaking larger campaigns (higher statistical power), or undertaking research in remote locations. This study describes how VOC may be sampled from skin and recovered from a polydimethylsilicone sampling coupon and analysed by thermal desorption (TD) interfaced to secondary electrospray ionisation (SESI) time-of-flight mass spectrometry (MS) for the high throughput screening of volatile fatty acids (VFAs) from human skin. Analysis times were reduced by 79% compared to gas chromatography-mass spectrometry methods (GC-MS) and limits of detection in the range 300 to 900 pg cm(-2) for VFA skin concentrations were obtained. Using body odour as a surrogate model for clinical testing 10 Filipino participants, 5 high and 5 low odour, were sampled in Manilla and the samples returned to the UK and screened by TD-SESI-MS and TD-GC-MS for malodour precursors with greater than >95% agreement between the two analytical techniques. Eight additional VFAs were also identified by both techniques with chains 4 to 15 carbons long being observed. TD-SESI-MS appears to have significant potential for the high throughput targeted screening of volatile biomarkers in human skin. PMID:24992564

  20. Volatile tritiated organic acids in stack effluents and in air surrounding contaminated materials

    SciTech Connect

    Belot, Y.; Camus, H.; Marini, T.; Raviart, S. )

    1993-06-01

    A small fraction of the tritium released into the atmosphere from tritium-handling or solid waste storage facilities was shown to be in the form of volatile organic acids. The same compounds were also found, but at a much higher proportion, in the tritium evolved at room temperature from highly contaminated materials placed under air atmospheres. This might be due to the oxidation and labeling of hydrocarbon(s) by mechanisms that are presumably of a radiolytic nature. The new forms could have an impact on operational requirements and waste management strategies within a tritium facility and a fusion reactor hall. Further data are needed to assess the related doses.

  1. Sulfide Mineralogy and Geochemistry

    NASA Astrophysics Data System (ADS)

    Dilles, John

    2007-02-01

    Reviews in Mineralogy and Geochemistry Series, Volume 61 David J. Vaughan, Editor Geochemical Society and Mineralogical Society of America; ISBN 0-939950-73-1 xiii + 714 pp.; 2006; $40. Sulfide minerals as a class represent important minor rock-forming minerals, but they are generally known as the chief sources of many economic metallic ores. In the past two decades, sulfide research has been extended to include important roles in environmental geology of sulfide weathering and resultant acid mine drainage, as well as in geomicrobiology in which bacteria make use of sulfides for metabolic energy sources. In the latter respect, sulfides played an important role in early evolution of life on Earth and in geochemical cycling of elements in the Earth's crust and hydrosphere.

  2. Multiple headspace solid-phase microextraction for quantifying volatile free fatty acids in cheeses.

    PubMed

    Rincón, Arturo A; Pino, Verónica; Ayala, Juan H; Afonso, Ana M

    2014-11-01

    Multiple headspace solid-phase microextraction (MHS-SPME) has been utilized for the quantitative determination of 9 volatile free fatty acids (FFAs) in cheeses, in combination with gas-chromatography and flame-ionization detection (GC-FID). Variables affecting HS-SPME and MHS-SPME were optimized to attain adequate sensitivity while allowing correct application of the MHS method. Thus, the MHS-SPME method was successfully performed when using 0.3g of cheese and 1 mL of NaCl (sat. solution), which is subjected to four consecutive extractions using the carboxen-polydimethylsyloxane (CAR-PDMS) as the commercial SPME coating, 40 min of HS extraction time at 45°C, and 6 min of desorption time in the GC injector at 290°C. The MHS-SPME permitted the calculation of β values, which range from 0.72±0.01-0.95±0.02, depending on the cheese studied. Later, this β parameter is used to perform quantitation for the 9 volatile FFAs after just a single HS-SPME extraction, using an external solvent calibration curve. The validity of the utilization of an external solvent calibration was tested with aqueous standards of volatile FFAs, getting average recoveries higher than 81.2%. Quantitation by MHS-SPME was free of matrix interferences despite measuring a complex cheese sample. The optimized method was validated, presenting inter-day reproducibility values (as RSD in %) lower than 13%, and limits of detection down to 7 µg kg(-1). The method was also compared with a conventional extraction method such as solid-phase extraction for the studied cheeses elaborated with goat milk, generating comparable results. To our knowledge, this is the first time that MHS-SPME has been applied to volatiles in cheeses. PMID:25127582

  3. Laboratory studies of Aedes aegypti (L.) attraction to ketones, sulfides and primary chloroalkanes tested alone and in combination with l-lactic acid

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The attraction of female Aedes aegypti to single compounds and binary compositions comprised of L-lactic acid and an additional saturated compound from a set of ketones, sulfides, and chloroalkanes was studied using a triple-cage dual-port olfactometer. These chemical classes were studied because o...

  4. Authentication of dried distilled grain with solubles (DDGS) by fatty acid and volatile profiling

    PubMed Central

    Tres, Alba; Heenan, Samuel P.; van Ruth, Saskia

    2014-01-01

    Demand for ethanol substituted fuels from the utilisation of cereal based biofuel has resulted in an over production of dried distillers grains with solubles (DDGS) that are now readily available on the animal feed market. With this rapid emerging availability comes potential variability in the nutritional value of DDGS and possible risks of feed contaminants. Subsequently, the authentication and traceability of alternative animal feed sources is of high priority. In this study and as part of the EU research project “Quality and Safety of Feeds and Food for Europe (QSAFFE FP7-KBBE-2010-4) an attempt was made to classify the geographical origin of cereal grains used in the production of DDGS material. DDGS material of wheat and corn origin were obtained from Europe, China, and the USA. Fatty acid profiles and volatile fingerprints were assessed by gas chromatography flame ionisation (GC-FID) and rapid proton transfer reaction mass spectrometry (PTR-MS) respectively. Chemometric analysis of fatty acid profiles and volatile fingerprints allowed for promising classifications of cereals used in DDGS material by geographical and botanical origin and enabled visual representation of the data. This objective analytical approach could be adapted for routine verification of cereal grains used in the production of DDGS material. PMID:25368433

  5. Selenium Sulfide

    MedlinePlus

    Selenium sulfide, an anti-infective agent, relieves itching and flaking of the scalp and removes the dry, ... Selenium sulfide comes in a lotion and is usually applied as a shampoo. As a shampoo, selenium ...

  6. A novel and simple treatment for control of sulfide induced sewer concrete corrosion using free nitrous acid.

    PubMed

    Sun, Xiaoyan; Jiang, Guangming; Bond, Philip L; Keller, Jurg; Yuan, Zhiguo

    2015-03-01

    Improved technologies are currently required for mitigating microbially induced concrete corrosion caused by the oxidation of sulfide to sulfuric acid in sewer systems. This study presents a novel strategy for reducing H2S oxidation on concrete surfaces that accommodate an active corrosion biofilm. The strategy aims to reduce biological oxidation of sulfide through treating the corrosion biofilm with free nitrous acid (FNA, i.e. HNO2). Two concrete coupons with active corrosion activity and surface pH of 3.8 ± 0.3 and 2.7 ± 0.2 were sprayed with nitrite. For both coupons, the H2S uptake rates were reduced by 84%-92% 15 days after the nitrite spray. No obvious recovery of the H2S uptake rate was observed during the entire experimental period (up to 12 months after the spray), indicating the long-term effectiveness of the FNA treatment in controlling the activity of the corrosion-causing biofilms. Live/Dead staining tests on the microorganisms on the concrete coupon surfaces demonstrated that viable bacterial cells decreased by > 80% 39 h after the nitrite spray, suggesting that biofilm cells were killed by the treatment. Examination of a corrosion layer within a suspended solution, containing the corrosion-causing biofilms, indicated that biological activity (ATP level and ratio of viable bacterial cells) was severely decreased by the treatment, confirming the bactericidal effect of FNA on the microorganisms in the biofilms. While field trials are still required to verify its effectiveness, it has been demonstrated here that the FNA spray is potentially a very cheap and effective strategy to reduce sewer corrosion. PMID:25543238

  7. Role of volatile fatty acids in colonization resistance to Clostridium difficile in gnotobiotic mice.

    PubMed Central

    Su, W J; Waechter, M J; Bourlioux, P; Dolegeal, M; Fourniat, J; Mahuzier, G

    1987-01-01

    Clostridium difficile is an agent involved in the development of antibiotic-associated pseudomembranous colitis. The purpose of this work was to investigate the role of volatile fatty acids (VFAs) in resistance to colonization by C. difficile by using a gnotobiotic animal model. Accordingly, germfree mice were associated with different hamster flora, and the VFAs in their cecal contents were measured by gas chromatography. The results showed that VFAs were produced mainly by the intestinal flora, especially by the strictly anaerobic bacteria. In these associated mice, the concentrations of acetic, propionic, and butyric acids were higher than those of other acids, but at pH 6.8 the MICs of these three acids in vitro for C. difficile were more than 200 mu eq/ml. In gnotobiotic mice monoassociated with C. difficile and in the isolated ceca of these mice, VFAs did not inhibit the growth of C. difficile. In gnotobiotic mice which were diassociated with C. difficile and C. butyricum and given drinking water with a lactose concentration of 20%, the cecal contents included about the same amount of butyric acid as did those of the monoassociated mice, although the population of C. difficile remained the same. Therefore, it is suggested that VFAs alone cannot inhibit intestinal colonization by C. difficile and that, consequently, other inhibitory mechanisms are also present. PMID:3596806

  8. Preparation of volatile fatty acid (VFA) calcium salts by anaerobic digestion of glucose.

    PubMed

    Li, Xiaofen; Swan, Janis E; Nair, Giridhar R; Langdon, Alan G

    2015-01-01

    Many potentially useful intermediates such as hydrogen and volatile fatty acids (VFAs) are formed during the complex anaerobic digestion processes that produce methane from biomass. This study recovers VFAs from an anaerobic digester by a combination of gas stripping and absorption with calcium carbonate slurry. Glucose was used as the model substrate because it is readily available, inexpensive, and easily digested. Sludge from a meatworks anaerobic digester produced methane and carbon dioxide (and sometimes a small amount of hydrogen) when batch-fed with glucose. Conditioning the neutral anaerobic sludge to an acidic pH (below 4.8) was achieved using repeated 1 g L(-1) doses of glucose. After conditioning, mainly VFAs and hydrogen were produced. The intermediate VFAs could be stripped using headspace gas. In subsequent fed-batch digestion/stripping cycles, the pH decreased when glucose was added and then increased when the VFA was gas stripped. The predominant acids formed at low pH values were lactic, butyric, and acetic acids. Lactic acid was converted to VFAs during stripping. The VFA calcium salts recovered were 80% butyrate and 20% acetate with minor quantities of propionate and valerate. PMID:25274086

  9. Biotransformation of volatile fatty acids by oleaginous and non-oleaginous yeast species.

    PubMed

    Kolouchová, Irena; Schreiberová, Olga; Sigler, Karel; Masák, Jan; Řezanka, Tomáš

    2015-11-01

    The possibility of utilizing volatile fatty acids (VFA)-containing waste substrates from biotechnological and industrial processes was investigated by cultivating both oleaginous (Candida sp., Rhodotorula glutinis, Trichosporon cutaneum, Yarrowia lipolytica) and non-oleaginous (Kluyveromyces polysporus, Saccharomyces cerevisiae, Torulaspora delbrueckii) yeast species on acetic acid, propionic acid and a combination of either acid with glucose as carbon and energy sources. Both oleaginous and non-oleaginous yeasts grew on VFA. Oleaginous yeasts accumulated lipids to 15-48% of dry cell weight, non-oleaginous yeasts also grew on VFA and showed comparable biomass yields but the lipid content was only 2-5%. Biomass and lipid yield increased in cultivations on VFA plus glucose. The lipid composition was comparable to plant-derived oils and therefore might be exploitable in biodiesel production; nearly all species, when cultured on propionate, showed a high content of the desirable odd-chain unsaturated FA, especially 17:1 acid. This study points at the wide array of possible applications of many yeasts, even non-oleaginous strains, for biovalorization of industrial wastes. Despite their low lipid content these species are useful because they can readily utilize VFA from waste products and, since they are not biologically hazardous, their biomass can be afterwards used, e.g. as livestock fodder. PMID:26323601

  10. Acidogenic fermentation of food waste for volatile fatty acid production with co-generation of biohydrogen.

    PubMed

    Dahiya, Shikha; Sarkar, Omprakash; Swamy, Y V; Mohan, S Venkata

    2015-04-01

    Fermentation experiments were designed to elucidate the functional role of the redox microenvironment on volatile fatty acid (VFA, short chain carboxylic acid) production and co-generation of biohydrogen (H2). Higher VFA productivity was observed at pH 10 operation (6.3g/l) followed by pH 9, pH 6, pH 5, pH 7, pH 8 and pH 11 (3.5 g/l). High degree of acidification, good system buffering capacity along with co-generation of higher H2 production from food waste was also noticed at alkaline condition. Experiments illustrated the role of initial pH on carboxylic acids synthesis. Alkaline redox conditions assist solubilization of carbohydrates, protein and fats and also suppress the growth of methanogens. Among the carboxylic acids, acetate fraction was higher at alkaline condition than corresponding neutral or acidic operations. Integrated process of VFA production from waste with co-generation of H2 can be considered as a green and sustainable platform for value-addition. PMID:25682230

  11. Jasmonic acid is involved in the signaling pathway for fungal endophyte-induced volatile oil accumulation of Atractylodes lancea plantlets

    PubMed Central

    2012-01-01

    Background Jasmonic acid (JA) is a well-characterized signaling molecule in plant defense responses. However, its relationships with other signal molecules in secondary metabolite production induced by endophytic fungus are largely unknown. Atractylodes lancea (Asteraceae) is a traditional Chinese medicinal plant that produces antimicrobial volatiles oils. We incubated plantlets of A. lancea with the fungus Gilmaniella sp. AL12. to research how JA interacted with other signal molecules in volatile oil production. Results Fungal inoculation increased JA generation and volatile oil accumulation. To investigate whether JA is required for volatile oil production, plantlets were treated with JA inhibitors ibuprofen (IBU) and nordihydroguaiaretic acid. The inhibitors suppressed both JA and volatile oil production, but fungal inoculation could still induce volatile oils. Plantlets were further treated with the nitric oxide (NO)-specific scavenger 2-(4-carboxyphenyl)-4,4,5,5-tetramethylimidazoline-1-oxyl-3-oxide potassium salt (cPTIO), the H2O2 inhibitors diphenylene iodonium (DPI) and catalase (CAT), and the salicylic acid (SA) biosynthesis inhibitors paclobutrazol and 2-aminoindan-2-phosphonic acid. With fungal inoculation, IBU did not inhibit NO production, and JA generation was significantly suppressed by cPTIO, showing that JA may act as a downstream signal of the NO pathway. Exogenous H2O2 could reverse the inhibitory effects of cPTIO on JA generation, indicating that NO mediates JA induction by the fungus through H2O2-dependent pathways. With fungal inoculation, the H2O2 scavenger DPI/CAT could inhibit JA generation, but IBU could not inhibit H2O2 production, implying that H2O2 directly mediated JA generation. Finally, JA generation was enhanced when SA production was suppressed, and vice versa. Conclusions Jasmonic acid acts as a downstream signaling molecule in NO- and H2O2-mediated volatile oil accumulation induced by endophytic fungus and has a complementary

  12. Synergism in the effect of prior jasmonic acid application on herbivore-induced volatile emission by Lima bean plants: transcription of a monoterpene synthase gene and volatile emission

    PubMed Central

    Menzel, Tila R.; Weldegergis, Berhane T.; David, Anja; Boland, Wilhelm; Gols, Rieta; van Loon, Joop J. A.; Dicke, Marcel

    2014-01-01

    Jasmonic acid (JA) plays a central role in induced plant defence e.g. by regulating the biosynthesis of herbivore-induced plant volatiles that mediate the attraction of natural enemies of herbivores. Moreover, exogenous application of JA can be used to elicit plant defence responses similar to those induced by biting-chewing herbivores and mites that pierce cells and consume their contents. In the present study, we used Lima bean (Phaseolus lunatus) plants to explore how application of a low dose of JA followed by minor herbivory by spider mites (Tetranychus urticae) affects transcript levels of P. lunatus (E)-β-ocimene synthase (PlOS), emission of (E)-β-ocimene and nine other plant volatiles commonly associated with herbivory. Furthermore, we investigated the plant’s phytohormonal response. Application of a low dose of JA increased PlOS transcript levels in a synergistic manner when followed by minor herbivory for both simultaneous and sequential infestation. Emission of (E)-β-ocimene was also increased, and only JA, but not SA, levels were affected by treatments. Projection to latent structures-discriminant analysis (PLS-DA) of other volatiles showed overlap between treatments. Thus, a low-dose JA application results in a synergistic effect on gene transcription and an increased emission of a volatile compound involved in indirect defence after herbivore infestation. PMID:25318119

  13. Vine-shoot waste aqueous extract applied as foliar fertilizer to grapevines: Effect on amino acids and fermentative volatile content.

    PubMed

    Sánchez-Gómez, R; Garde-Cerdán, T; Zalacain, A; Garcia, R; Cabrita, M J; Salinas, M R

    2016-04-15

    The aim of this work was to study the influence of foliar applications of different wood aqueous extracts on the amino acid content of musts and wines from Airén variety; and to study their relationship with the volatile compounds formed during alcoholic fermentation. For this purpose, the foliar treatments proposed were a vine-shoot aqueous extract applied in one and two times, and an oak extract which was only applied once. Results obtained show the potential of Airén vine-shoot waste aqueous extracts to be used as foliar fertilizer, enhancing the wine amino acid content especially when they were applied once. Similar results were observed with the aqueous oak extract. Regarding wine fermentative volatile compounds, there is a close relationship between musts and their wines amino acid content allowing us to discuss about the role of proline during the alcoholic fermentation and the generation of certain volatiles. PMID:26616933

  14. [Volatile fatty acids in the rumen of sheep fed a synthetic diet].

    PubMed

    Baran, M; Bod'a, K; Jalc, D; Piatková, M; Kalacnjuk, G I; Várady, J

    1983-08-01

    A trial was conducted with wethers to study the effect of the administration of a synthetic diet (composition: 30.125% starch, 30.125% sucrose, 25% cellulose, 5.25% urea, 8.125% mineral supplement, 1.25% maize oil and 0.125% cholinechloride) upon rumen fermentation. The adaptation to the synthetic diet lasted three months, the proportion of the synthetic diet increasing every week (by 10%) to the detriment of a traditional diet (composition: 0.5 kg meadow hay, 0.3 kg barley, 0.2 kg wheat bran, salt and straw ad libitum). In the 10th week the animals consumed 0.5 kg granular synthetic diet, 0.2 kg cellulose flakes and 0.01 kg polystyrene. After three weeks of the administration of the fully synthetic diet, the rumen fluid was sampled after morning feeding in intervals of 0, 1, 3, 5 and 7 hours. In the dynamics of fermentation, statistically significant differences were found only in isobutyric and isovaleric acid between the 0th and 1st and between the 5th and 7th hours (P less than 0.05--P less than 0.001). The data for all the time intervals were recalculated to average values. These were as follows: total volatile fatty acids 63.03 mmol/l, acetic acid 51.00 mol%, propionic acid 26.75 mol%, butyric acid 19.43 mol%, isobutyric acid 0.91 mol%, isovaleric 1.27 mol%, valeric acid 0.62 mol%, energy efficiency of VFA production 78.23%. The obtained data are confronted with literary data on synthetic diets which contained urea and various energy sources. PMID:6414150

  15. Mortality of Pratylenchus penetrans by Volatile Fatty Acids from Liquid Hog Manure

    PubMed Central

    Mahran, A.; Tenuta, M.; Hanson, M. L.; Daayf, F.

    2008-01-01

    As part of our research program assessing the use of liquid hog manure (LHM) to control root-lesion nematodes, Pratylenchus penetrans, a series of acute toxicity tests was conducted to: (i) examine if non-ionized forms of volatile fatty acids (VFA) are responsible for the mortality of P. penetrans exposed to LHM under acidic conditions, (ii) determine if Caenorhabditis elegans can be a surrogate for P. penetrans in screening tests by comparing their sensitivities to VFA, (iii) characterize the nematicidal effect of individual VFA in LHM to P. penetrans, and (iv) determine whether individual VFA in LHM interact in their toxicity to P. penetrans. LHM was significantly (P ≤ 0.05) more toxic to P. penetrans than a mixture of its main VFA components at concentrations of 5% and 10% (vol. VFA or LHM /vol. in buffer). Pratylenchus penetrans was more sensitive to acetic acid than C. elegans, whereas the sensitivity of both nematode species to n-caproic acid was similar. Individual VFA vary in their lethality to P. penetrans. n-valeric acid was the most toxic (LC95= 6.8 mM), while isobutyric acid was the least toxic (LC95 = 45.7 mM). Individual VFA did not interact in their toxicity to P. penetrans, and their effects were considered additive. VFA account for the majority of the lethal effect of LHM to P. penetrans under acidic conditions. Caenorhabditis elegans cannot be used as a surrogate to P. penetrans in toxicity studies using VFA. The efficacy of LHM to control P. penetrans can be evaluated by assessing its VFA content prior to application, and this evaluation is facilitated by the fact that the interaction of individual VFA appears to be simply additive. PMID:19259528

  16. Volatility and oxidative aging of aqueous maleic acid aerosol droplets and the dependence on relative humidity.

    PubMed

    Dennis-Smither, Benjamin J; Marshall, Frances H; Miles, Rachael E H; Preston, Thomas C; Reid, Jonathan P

    2014-07-31

    The microphysical structure and heterogeneous oxidation by ozone of single aerosol particles containing maleic acid (MA) has been studied using aerosol optical tweezers and cavity enhanced Raman spectroscopy. The evaporation rate of MA from aqueous droplets has been measured over a range of relative humidities and the pure component vapor pressure determined to be (1.7 ± 0.2) × 10(-3) Pa. Variation in the refractive index (RI) of an aqueous MA droplet with relative humidity (RH) allowed the subcooled liquid RI of MA to be estimated as 1.481 ± 0.001. Measurements of the hygroscopic growth are shown to be consistent with equilibrium model predictions from previous studies. Simultaneous measurements of the droplet composition, size, and refractive index have been made during ozonolysis at RHs in the range 50-80%, providing insight into the volatility of organic products, changes in the droplet hygroscopicity, and optical properties. Exposure of the aqueous droplets to ozone leads to the formation of products with a wide range of volatilities spanning from involatile to volatile. Reactive uptake coefficients show a weak dependence on ozone concentration, but no dependence on RH or salt concentration. The time evolving RI depends significantly on the RH at which the oxidation proceeds and can even show opposing trends; while the RI increases with ozone exposure at low relative humidity, the RI decreases when the oxidation proceeds at high relative humidity. The variations in RI are broadly consistent with a framework for predicting RIs for organic components published by Cappa et al. ( J. Geophys. Res. 2011 , 116 , D15204 ). Once oxidized, particles are shown to form amorphous phases on drying rather than crystallization, with slow evaporation kinetics of residual water. PMID:25003240

  17. Using electromagnetic induction technology to predict volatile fatty acid, source area differences.

    PubMed

    Woodbury, Bryan L; Eigenberg, Roger A; Varel, Vince; Lesch, Scott; Spiehs, Mindy J

    2011-01-01

    Subsurface measures have been adapted to identify manure accumulation on feedlot surfaces. Understanding where manure accumulates can be useful to develop management practices that mitigate air emissions from manure, such as odor or greenhouse gases. Objectives were to determine if electromagnetic induction could be used to predict differences in volatile fatty acids (VFA) and other volatiles produced in vitro from feedlot surface material following a simulated rain event. Twenty soil samples per pen were collected from eight pens with cattle fed two different diets using a predictive sampling approach. These samples were incubated at room temperature for 3 d to determine fermentation products formed. Fermentation products were categorized into acetate, straight-, branched-chained, and total VFAs. These data were used to develop calibration prediction models on the basis of properties measured by electromagnetic induction (EMI). Diet had no significant effect on mean volatile solids (VS) concentration of accumulated manure. However, manure from cattle fed a corn (Zea mays L.)-based diet had significantly ( P ≤ 0.1) greater mean straight-chained and total VFA generation than pens where wet distillers grain with solubles (WDGS) were fed. Alternately, pens with cattle fed a WDGS-based diet had significantly (P ≤ 0.05) greater branched-chained VFAs than pens with cattle fed a corn-based diet. Many branched-chain VFAs have a lower odor threshold than straight-chained VFAs; therefore, emissions from WDGS-based diet manure would probably have a lower odor threshold. We concluded that diets can affect the types and quantities of VFAs produced following a rain event. Understanding odorant accumulation patterns and the ability to predict generation can be used to develop precision management practices to mitigate odor emissions. PMID:21869503

  18. Experimental studies of selective acid gas removal: Absorption of hydrogen sulfide and carbon dioxide into aqueous methyldiethanolamine using packed columns

    SciTech Connect

    Schubert, C.N.

    1988-01-01

    The use of aqueous methyldiethanolamine (MDEA) for selective removal of hydrogen sulfide from acid gas streams has been studied in a 2 inch column packed with 1/4 inch ceramic Intalox saddles. The column was operated in a counter-current, steady state fashion. The feed gas composition varied between 1 and 5 mole % hydrogen sulfide and between 0 and 50 mole % carbon dioxide. In order to assist the development of packed column absorption models, the rate at which pure carbon dioxide absorbs into 2 M MDEA was measured as a function of pressure, liquid flow rate and packed bed length. The importance of end effects was carefully evaluated. In addition, draining and tracer methods were used to estimate the amount of static holdup present in the column. Using classical draining methods, as much as 50 % of the total holdup was found to be static. However, according to the step decrease in tracer method, less than 5 % of the total holdup was static. Since the step decrease in tracer method measures the amount of static holdup present in the bed under irrigated conditions, it seems likely that the draining method provides an unrealistic estimate of static holdup. Thus, although the notion of static holdup may be useful as a means of correlating mass transfer coefficients, the data indicate that very little static holdup exists in the column under irrigated conditions. Hence, in the absence of a mechanistically sound model, the choice of whether to use static holdup or dispersion as a means of accounting for deviations from plug flow in the liquid phase should be made on the basis of computational convenience.

  19. Pseudo catalytic transformation of volatile fatty acids into fatty acid methyl esters.

    PubMed

    Jung, Jong-Min; Cho, Jinwoo; Kim, Ki-Hyun; Kwon, Eilhann E

    2016-03-01

    Instead of anaerobic digestion of biodegradable wastes for producing methane, this work introduced the transformation of acidogenesis products (VFAs) into fatty acid methyl esters (FAMEs) to validate the feasible production of short-chained fatty alcohols via hydrogenation of FAMEs. In particular, among VFAs, this work mainly described the mechanistic explanations for transforming butyric acid into butyric acid methyl ester as a case study. Unlike the conventional esterification process (conversion efficiency of ∼94%), the newly introduced esterification under the presence of porous materials via the thermo-chemical process reached up to ∼99.5%. Furthermore, the newly introduced esterification via the thermo-chemical pathway in this work showed extremely high tolerance of impurities: the conversion efficiency under the presence of impurities reached up to ∼99±0.3%; thus, the inhibition behaviors attributed from the impurities used for the experimental work were negligible. PMID:26720136

  20. Volatile fatty acids produced by co-fermentation of waste activated sludge and henna plant biomass.

    PubMed

    Huang, Jingang; Zhou, Rongbing; Chen, Jianjun; Han, Wei; Chen, Yi; Wen, Yue; Tang, Junhong

    2016-07-01

    Anaerobic co-fermentation of waste activated sludge (WAS) and henna plant biomass (HPB) for the enhanced production of volatile fatty acids (VFAs) was investigated. The results indicated that VFAs was the main constituents of the released organics; the accumulation of VFAs was much higher than that of soluble carbohydrates and proteins. HPB was an advantageous substrate compared to WAS for VFAs production; and the maximum VFAs concentration in an HPB mono-fermentation system was about 2.6-fold that in a WAS mono-fermentation system. In co-fermentation systems, VFAs accumulation was positively related to the proportion of HPB in the mixed substrate, and the accumulated VFAs concentrations doubled when HPB was increased from 25% to 75%. HPB not only adjust the C/N ratio; the associated and/or released lawsone might also have a positive electron-shuttling effect on VFAs production. PMID:27003793

  1. Bioproduction of volatile fatty acid from the fermentation of waste activated sludge for in situ denitritation.

    PubMed

    Wang, Bo; Peng, Yongzhen; Guo, Yuanyuan; Wang, Shuying

    2016-04-01

    Waste activated sludge (WAS) fermentation integrated with denitritation (the reduction of nitrite to dinitrogen gas) at different pHs was investigated in batch-mode reactors over a 24-day period. The results showed that in comparison with controlled pHs, the volatile fatty acid (VFA) bioproduction for in situ denitritation was significantly improved at uncontrolled pH. VFA fermented from WAS was quickly consumed by denitritation at uncontrolled pH, which accelerated sludge degradation. On the other hand, sludge digestion was benefited from the alkalinity produced from denitritation, while methanogenesis was prohibited by alkalinity and nitrite. The integrated sludge fermentation and denitritation can be cost-effectively applied to wastewater treatment plants, so that organic substrates (e.g., VFAs) are produced for denitritation via simultaneous sludge fermentation, which enables WAS reutilization and enhances nitrogen removal efficiency without the need of external carbon sources. PMID:26475401

  2. Optimization of process parameters for production of volatile fatty acid, biohydrogen and methane from anaerobic digestion.

    PubMed

    Khan, M A; Ngo, H H; Guo, W S; Liu, Y; Nghiem, L D; Hai, F I; Deng, L J; Wang, J; Wu, Y

    2016-11-01

    The anaerobic digestion process has been primarily utilized for methane containing biogas production over the past few years. However, the digestion process could also be optimized for producing volatile fatty acids (VFAs) and biohydrogen. This is the first review article that combines the optimization approaches for all three possible products from the anaerobic digestion. In this review study, the types and configurations of the bioreactor are discussed for each type of product. This is followed by a review on optimization of common process parameters (e.g. temperature, pH, retention time and organic loading rate) separately for the production of VFA, biohydrogen and methane. This review also includes additional parameters, treatment methods or special additives that wield a significant and positive effect on production rate and these products' yield. PMID:27570139

  3. Predicting the mobility of Zn, Fe, Cu, Pb, Cd from roasted sulfide (pyrite) residues -- A case study of wastes from the sulfuric acid industry in Sweden

    SciTech Connect

    Lin, Z.; Qvarfort, U.

    1996-12-31

    Leachates from roasted sulfide residues, which are the wastes from the production of sulfuric acid at Falun, Sweden, have low pH and high concentrations of Zn, Fe, and SO{sub 4}. The minerals are mainly hematite and maghemite and, because the various sulfides in the feed behave differently during the roasting process, the residual sulfides minerals are pyrrhotite and sphalerite. Oxidation of the residual sulfides contributes acidity, Zn, Fe, Cu, Cd, and sulfate to the effluents from the waste deposits. The dissolution of sphalerite is most likely accelerated in acid solution rich in Fe(III). The formation of Pb-sulfate coatings on galena may provide an armoring effect which slows the oxidation of the galena. Residual sulfides are source phases controlling long-term contaminant release. Other source minerals for Zn, Fe, Pb, Cu, Cd and SO{sub 4} in the effluents are iron oxides which retained percentage quantities of SO{sub 4}, roast-derived alteration rims of Zn oxides on sphalerite, altered silicates formed during the roasting process, and secondary minerals (e.g., Zn, Fe, Cu sulfates, iron hydroxides) that were precipitated by in-site oxidation in the waste dumps. The Zn, Fe, and Cu sulfates most likely control short-term changes in the chemistry of the leachate, while Pb concentration in the leachates may be controlled predominantly by Pb-release from the altered silicates. The mineralogical and geochemical data provide fundamental information essential for the remedial management of this type of industrial waste.

  4. Electrocatalytic reduction of sulfuric acid to hydrogen sulfide by a trinuclear niobium cluster

    SciTech Connect

    Paul, E.A.; Batten, T.H.; May, M.A.; Sayers, W.R.; Shelton, P.E.; Kojima, T.; Katovic, V.

    1994-02-16

    It is thought that metal cluster compounds hold great potential as catalysts for the multiple-electron reduction of small molecules, since they contain several metal atoms in close proximity, available for multiside bonding. However, very few examples of catalysis by metal clusters have been documented so far. In the course of the electrochemical investigation of Nb(5+) in H{sub 2}SO{sub 4} and the mechanism for the formation of the trinuclear cluster anion [Nb{sub 3}O{sub 2}(SO{sub 4}){sub 6}(H{sub 2}O){sub 3}]{sup 5{minus}}, the authors found that the niobium cluster electrocatalyzes the reduction of 12 M H{sub 2}SO{sub 4} to H{sub 2}S on a Hg electrode at room temperature at -1.2 V vs Hg/Hg{sub 2}SO{sub 4} (-0.6 V vs NHE). The reduction of sulfate to sulfide is an important step in the sulfur biological cycle. In plants and some bacteria, the reduction is achieved through several intermediate steps, each requiring a different enzyme. Concentrated H{sub 2}SO{sub 4} can be reduced by a variety of metals at elevated temperatures (>230 {degrees}C) to H{sub 2} and SO{sub 2}. With Zn and Cd, some H{sub 2}S and elemental S depending upon the I{sup {minus}}/I{sub 2} concentrations. This latter reaction, however, required solid KI and was not established to be catalytic.

  5. Functional analysis of a tomato salicylic acid methyl transferase and its role in synthesis of the flavor volatile methyl salicylate

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Methyl salicylate (MeSA) is a volatile plant secondary metabolite that is an important contributor to taste and scent of many fruits and flowers. It is synthesized from salicylic acid (SA), a phytohormone that contributes to plant pathogen defense. MeSA is synthesized by members of a family of O-met...

  6. Volatile profiling reveals intracellular metabolic changes in Aspergillus parasiticus: veA regulates branched chain amino acid and ethanol metabolism

    PubMed Central

    2010-01-01

    Background Filamentous fungi in the genus Aspergillus produce a variety of natural products, including aflatoxin, the most potent naturally occurring carcinogen known. Aflatoxin biosynthesis, one of the most highly characterized secondary metabolic pathways, offers a model system to study secondary metabolism in eukaryotes. To control or customize biosynthesis of natural products we must understand how secondary metabolism integrates into the overall cellular metabolic network. By applying a metabolomics approach we analyzed volatile compounds synthesized by Aspergillus parasiticus in an attempt to define the association of secondary metabolism with other metabolic and cellular processes. Results Volatile compounds were examined using solid phase microextraction - gas chromatography/mass spectrometry. In the wild type strain Aspergillus parasiticus SU-1, the largest group of volatiles included compounds derived from catabolism of branched chain amino acids (leucine, isoleucine, and valine); we also identified alcohols, esters, aldehydes, and lipid-derived volatiles. The number and quantity of the volatiles produced depended on media composition, time of incubation, and light-dark status. A block in aflatoxin biosynthesis or disruption of the global regulator veA affected the volatile profile. In addition to its multiple functions in secondary metabolism and development, VeA negatively regulated catabolism of branched chain amino acids and synthesis of ethanol at the transcriptional level thus playing a role in controlling carbon flow within the cell. Finally, we demonstrated that volatiles generated by a veA disruption mutant are part of the complex regulatory machinery that mediates the effects of VeA on asexual conidiation and sclerotia formation. Conclusions 1) Volatile profiling provides a rapid, effective, and powerful approach to identify changes in intracellular metabolic networks in filamentous fungi. 2) VeA coordinates the biosynthesis of secondary

  7. Formation and characterization of conductive thin layers of copper sulfide (Cu xS) on the surface of polyethylene and polyamide by the use of higher polythionic acids

    NASA Astrophysics Data System (ADS)

    Ancutiene, Ingrida; Janickis, Vitalijus; Ivanauskas, Remigijus

    2006-04-01

    Layers of copper sulfide of varying composition and properties are formed on the surface of polyethylene and polyamide by a sorption-diffusion method using solutions of higher polythionic acids, H 2S nO 6. The concentration of sulfur adsorbed-diffused into PE and PA depends on the degree of the acid sulfurity, n, the temperature of the solution and the period of the polymer treatment. The amount of copper in a sulfide (Cu xS) layer formed after the sulfured polymer treatment with a solution of Cu(I-II) salt is strongly dependent on the concentration of sulfur in the PE and PA. By the chemical analysis of the obtained sulfide layers was determined that a value of x in the Cu xS layers varies in the interval 1 < x < 2. The microscopic investigation of transverse sections of PE and PA samples with copper sulfide layers showed that the major part of copper sulfide is in the surface matrix of the polymer. X-ray diffraction studies of the Cu xS layers obtained seven phases: with x = 2 (chalcocite), 1.9375 (djurleite), 1.8 (digenite), 1.75 (anilite), 1.12 (yarrowite), 1.06 (talnakhite) and 1 (covellite). The measurements of the electrical conductance of Cu xS layers (0.1-4 S cm -2) showed that its value greatly depends on the conditions of PE and PA interaction with H 2S nO 6 and of further interaction with Cu(I-II) salt solution, on the chemical and phase composition of the layer.

  8. The interplay of the gut microbiome, bile acids, and volatile organic compounds.

    PubMed

    Sagar, Nidhi M; Cree, Ian A; Covington, James A; Arasaradnam, Ramesh P

    2015-01-01

    Background. There has been an increasing interest in the use of volatile organic compounds (VOCs) as potential surrogate markers of gut dysbiosis in gastrointestinal disease. Gut dysbiosis occurs when pathological imbalances in gut bacterial colonies precipitate disease and has been linked to the dysmetabolism of bile acids (BA) in the gut. BA metabolites as a result of microbial transformations act as signaling molecules and have demonstrated regulation of intestinal homeostasis through the TGR5 and FXR receptors by inhibiting inflammation, preventing pathogen invasion, and maintaining cell integrity. The presence of VOC footprints is the resultant effect to gut microbiome substrate fermentation. Aim. To review the role of the gut microbiome and bile acid signaling in intestinal homeostasis and the resultant use of VOCs as potential noninvasive surrogate biomarkers in gut dysbiosis. Methods. A systematic search on PubMed and Medline databases was performed to identify articles relevant to gut dysbiosis, BA metabolism, and VOCs. Conclusions. The host and presence of the gut microbiome appear to regulate the BA pool size. A dysbiotic gut microbiome results in disrupted intestinal homeostasis, which may be reflected by VOCs, differentiating those who are healthy and those with disease. PMID:25821460

  9. Ethanol and Volatile Fatty Acid Production from Lignocellulose by Clostridium cellulolyticum

    PubMed Central

    Williams, K.; Zheng, Y.; McGarvey, J.; Fan, Z.; Zhang, R.

    2013-01-01

    Clostridium cellulolyticum is capable of producing glycosyl hydrolase enzymes as well as fermentation products including ethanol and acetate. In this study, the potential of using C. cellulolyticum for ethanol and volatile fatty acid production from straw and grape pomace was examined. For rice straw, the effects of alkaline pretreatment and substrate sterilization prior to fermentation on products yields were also investigated. Effects of alkaline pretreatment and necessity for subsequent washing were tested for two types of grape pomace. For rice straw, the highest ethanol yield was 0.16 g/gVS from the straw pretreated with 10% sodium hydroxide loading at 121°C for 1 hour. Sterilization of the straw prior to fermentation was found to be not significant for ethanol production. Sterilization appeared to decrease native acetogen populations in the rice straw, resulting in lower acetic acid yields. The highest ethanol yield from grape pomace was of 0.09 g/gVS from the pretreated pomace. Pomace type (red or white) and washing were found to be not significant. Ethanol yields by C. cellulolyticum were lower than those from yeast in a simultaneous saccharification and fermentation system, but overall conversion of cellulose and hemicellulose was high, between 68 and 79%. PMID:25969767

  10. Corn or sorghum wet distiller's grains with solubles in combination with steam-flaked corn: In vitro fermentation and hydrogen sulfide production

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The effects of wet distiller's grains with solubles (WDG) on in vitro rate of gas production, in vitro dry matter disappearance (IVDMD), hydrogen sulfide (H2S) production, and volatile fatty acids (VFA) were evaluated. Five substrate treatments that were balanced for ether extract content were arran...

  11. Laboratory Studies of Aedes aegypti Attraction to Ketones, Sulfides, and Primary Chloroalkanes Tested Alone and in Combination with L-Lactic Acid.

    PubMed

    Bernier, Ulrich R; Kline, Daniel L; Allan, Sandra A; Barnard, Donald R

    2015-03-01

    The attraction of female Aedes aegypti to single compounds and binary compositions containing L-lactic acid and an additional saturated compound from a set of ketones, sulfides, and chloroalkanes was studied using a triple-cage dual-port olfactometer. These chemical classes were studied because of their structural relation to acetone, dimethyl disulfide, and dichloromethane, which have all been reported to synergize attraction to L-lactic acid. Human odors, carbon dioxide, and the binary mixture of L-lactic acid and CO₂served as controls for comparison of attraction responses produced by the binary mixtures. All tested mixtures that contained chloroalkanes attracted mosquitoes at synergistic levels, as did L-lactic acid and CO₂. Synergism was less frequent in mixtures of L-lactic acid with sulfides and ketones; in the case of ketones, synergistic attraction was observed only for L-lactic acid combined with acetone or butanone. Suppression or inhibition of attraction response was observed for combinations that contained ketones of C7-C12 molecular chain length (optimum in the C8-C10 range). This inhibition effect is similar to that observed previously for specific ranges of carboxylic acids, aldehydes, and alcohols. PMID:25843177

  12. Selenium Sulfide

    MedlinePlus

    Selenium sulfide comes in a lotion and is usually applied as a shampoo. As a shampoo, selenium sulfide usually is used twice a week for the first ... it is irritating. Rinse off all of the lotion.Do not use this medication on children younger ...

  13. Effects of wheat bran and porridge oats on hepatic portal venous volatile fatty acids in the pig.

    PubMed

    Topping, D L; Illman, R J; Taylor, M N; McIntosh, G H

    1985-01-01

    Adult male pigs (40-60 kg of body weight) of the Kangaroo Island strain were surgically implanted with chronic indwelling hepatic portal venous cannulae. After a 24-hour fast the animals were given meals containing 500 g of either wheat bran or porridge oats and 200 g of sucrose and 2 litres of milk. With both cereal preparations plasma volatile fatty acids rose in the hepatic portal vein but the increase was significantly greater with wheat bran. Omission of sucrose and milk did not alter the response to porridge oats but diminished the response to wheat bran. These changes in plasma volatile fatty acids were unaffected by prior cooking of the cereals with hot water. With all test meals acetate and propionate were the major acids found, with butyrate contributing less than 8% of the total. This compositional profile was also found when the pigs were fed a commercial ration. The absence of butyrate differed from observations in the rat and reflected low concentrations of this acid in large bowel digesta. The difference in the response of the concentration of volatile fatty acids to feeding porridge oats and wheat bran in the pig was also the reverse of that found in the rat. These species differences may be of significance in relation to the choice of animal models for human fibre metabolism. PMID:2998265

  14. A review: factors affecting excess sludge anaerobic digestion for volatile fatty acids production.

    PubMed

    Zhang, Dong; Li, Xiaoshuai; Jia, Shuting; Dai, Lingling; Zhao, Jianfu; Chen, Yinguang; Dai, Xiaohu

    2015-01-01

    This paper presents a review of methods that improve the production of volatile fatty acids (VFA) from excess sludge during the anaerobic digestion process. These methods are mainly divided into two approaches. The first approach is located in the pre-treatment methods, which change the properties of the substrates, such as thermal pre-treatment, alkaline pre-treatment, microwave pre-treatment and ultrasonic pre-treatment. The other approach is found in the fermentation process control methods, which influence the environment of anaerobic digestion for the production of VFA, such as pH, temperature, mixing, additives and solids retention time control. In the text recent research studies of each method are listed and analyzed in detail. Comparably, microwave and ultrasonic pre-treatment methods are considered emerging and promising technologies due to their efficiency and environmentally friendly characteristics. However, the microwave pre-treatment has high electricity demand, which might make the process economically unfeasible. In order to calculate optimal operation, further studies still need to be done. PMID:26287825

  15. Recovery of reducing sugars and volatile fatty acids from cornstalk at different hydrothermal treatment severity.

    PubMed

    Zhu, Zhangbing; Liu, Zhidan; Zhang, Yuanhui; Li, Baoming; Lu, Haifeng; Duan, Na; Si, Buchun; Shen, Ruixia; Lu, Jianwen

    2016-01-01

    This study focused on the degradation of cornstalk and recovery of reducing sugars and volatile fatty acids (VFAs) at different hydrothermal treatment severity (HTS) (4.17-8.28, 190-320°C). The highest recovery of reducing sugars and VFAs reached 92.39% of aqueous products, equal to 34.79% based on dry biomass (HTS, 6.31). GC-MS and HPLC identified that the aqueous contained furfural (0.35-2.88 g/L) and 5-hydroxymethyl furfural (0-0.85 g/L) besides reducing sugars and VFAs. Hemicellulose and cellulose were completely degraded at a HTS of 5.70 and 7.60, respectively. SEM analysis showed that cornstalk was gradually changed from rigid and highly ordered fibrils to molten and grainy structure as HTS increased. FT-IR and TGA revealed the significant changes of organic groups for cornstalk before and after hydrothermal treatment at different HTS. Hydrothermal treatment might be promising for providing feedstocks suitable for biohythane production. PMID:26316401

  16. Dynamic metabolic modelling of volatile fatty acids conversion to polyhydroxyalkanoates by a mixed microbial culture.

    PubMed

    Pardelha, Filipa; Albuquerque, Maria G E; Reis, Maria A M; Oliveira, Rui; Dias, João M L

    2014-06-25

    In this work, we present a dynamic metabolic model that describes the uptake of complex mixtures of volatile fatty acids (VFA) and respective conversion into PHA by mixed microbial cultures (MMC). This model builds upon a previously published flux balance analysis model [1] that identified the minimization of TCA cycle activity as the key metabolic objective to predict PHA storage fluxes and respective composition. The model was calibrated either with experimental data of PHA production from fermented sugar cane molasses or from synthetic mixtures of VFA. All PHA production experiments were performed using a MMC selected with fermented sugar cane molasses under feast and famine regimen. The model was able to capture the process dynamics denoted by an excellent fit between experimental and computed time profiles of concentrations with the regression coefficients always above 0.92. The introduced VFA uptake regulatory factor reflects the decrease of acetyl-CoA and propionyl-CoA available to TCA cycle in conformity with the hypothesis that the minimization of TCA cycle is a key metabolic objective for MMC subjected to feast and famine regimen for the maximization of PHA production. PMID:23933561

  17. Measurements of Volatile Organic Compounds and Gaseous Sulfuric Acid During the 2008 CAREBEIJING Campaign

    NASA Astrophysics Data System (ADS)

    Zhang, R.; Zheng, J.; Hu, M.; Zhu, T.

    2009-05-01

    Air quality in Beijing has been a hot topic recently, because Beijing hosted the 2008 summer Olympics. To combat the problem, China ordered numerous factories shut down or used only sporadically during the games to limit air pollution in the area. Another major step involved ordering about one-half of the city's 3.3 million vehicles off the road during the games, allowing only cars on roads with odd or even-numbered license plates on alternate days until the games were over. In addition, China has implemented new auto emission standards since March 2009 with regulations that are similar to those used throughout Europe. Our team at the Texas A&M participated in the 2008 CAREBEIJING campaign, with the objectives of studying the complex chemistry of the air in Beijing, looking at emission controls and their effectiveness, studying the surrounding air from other regions and how it can affect Beijing's air, and comparing all of our findings with air quality in other cities we have examined, such as Mexico City and Houston. In this talk, preliminary results of measurements of volatile organic compounds (VOCs) and gaseous sulfuric acid will be presented to discuss the trends of VOCs and new particle formation associated with the traffic control.

  18. A comprehensive study on volatile fatty acids production from rice straw coupled with microbial community analysis.

    PubMed

    Park, Gwon Woo; Seo, Charles; Jung, Kwonsu; Chang, Ho Nam; Kim, Woong; Kim, Yeu-Chun

    2015-06-01

    Rice straw is one of the most abundant renewable energy sources available. Through anaerobic acidogenesis, the substance of rice straw can be converted to volatile fatty acids (VFAs). VFAs itself is of value and is a precursor to biofuels. Hence, it can be converted to mixed alcohols by addition of hydrogen, and biodiesel can be produced as a carbon source for oleaginous microorganism. To maximize VFAs production during anaerobic digestion (AD), response surface analysis (RSM) was carried out with respect to temperature, substrate concentration, and pH variables. Optimization results showed maximal VFAs concentration of 12.37 g/L at 39.23 °C, 52.85 g/L of rice straw, and pH 10. In quantification of microbial community by quantitative polymerase chain reaction, the bacterial profile showed that the growth of methanogens was effectively inhibited by methanogenic inhibitors. Furthermore, 454 pyrosequencing showed that members of the Ruminococcaceae family, capable of hydrolyzing lignocellulosic biomass, were the most dominant species in many RSM trials. This study provided a useful insight on the biological improvement of AD performance through the combinational linkage between process parameters and microbial information. PMID:25651880

  19. Improving production of volatile fatty acids from food waste fermentation by hydrothermal pretreatment.

    PubMed

    Yin, Jun; Wang, Kun; Yang, Yuqiang; Shen, Dongsheng; Wang, Meizhen; Mo, Han

    2014-11-01

    Food waste (FW) was pretreated by a hydrothermal method and then fermented for volatile fatty acid (VFAs) production. The soluble substance in FW increased after hydrothermal pretreatment (⩽200 °C). Higher hydrothermal temperature would lead to mineralization of the organic compounds. The optimal temperature for organic dissolution was 180 °C, at which FW dissolved 42.5% more soluble chemical oxygen demand than the control. VFA production from pretreated FW fermentation was significantly enhanced compared with the control. The optimal hydrothermal temperature was 160 °C with a VFA yield of 0.908 g/g VSremoval. Butyrate and acetate were the prevalent VFAs followed by propionate and valerate. FW fermentation was inhibited after 200 °C pretreatment. The VFAs were extracted from the fermentation broth by liquid-liquid extraction. The VFA recovery was 50-70%. Thus, 0.294-0.411 g VFAs could be obtained per gram of hydrothermally pretreated FW (in dry weight) by this method. PMID:25218204

  20. Enhanced volatile fatty acids production of waste activated sludge under salinity conditions: Performance and mechanisms.

    PubMed

    Su, Gaoqiang; Wang, Shuying; Yuan, Zhiguo; Peng, Yongzhen

    2016-03-01

    Volatile fatty acids (VFAs) are essential for removing biological nitrogen and phosphorus in wastewater treatment plants. The purpose of this work was to investigate whether and how the addition of NaCl could improve the production of VFAs from waste activated sludge (WAS). Sludge solubilization was efficiently improved by the addition of NaCl. Both protein and carbohydrate in the fermentation liquid increased with the dosage of NaCl, and it provided a larger amount of organic compounds for the production of the VFAs. NaCl had inhibitory effects on the production of methane and a high dosage of NaCl could severely suppress the growth of methanogens, which decreased the consumption of the VFAs. Consequently, the production of VFAs was significantly enhanced by the addition of NaCl. The maximum production of VFAs was achieved with the highest dosage of NaCl (3316 mg (COD)/L at the NaCl dosage 0.5 mol/L; 783 mg (COD)/L without the addition of NaCl). Therefore, this study indicates that using NaCl could be an efficient method for improving the production of VFAs from WAS. PMID:26320405

  1. Microbial conversion of synthetic and food waste-derived volatile fatty acids to lipids.

    PubMed

    Vajpeyi, Shashwat; Chandran, Kartik

    2015-01-01

    Lipid accumulation in the oleaginous yeast Cryptococcus albidus was evaluated using mixtures of volatile fatty acids (VFA) as substrates. In general, batch growth under nitrogen limitation led to higher lipid accumulation using synthetic VFA. During batch growth, an initial COD:N ratio of 25:1mg COD:mg N led to maximum intracellular lipid accumulation (28.3 ± 0.7% g/g dry cell weight), which is the maximum reported for C. albidus using VFA as the carbon source, without compromising growth kinetics. At this feed COD:N ratio, chemostat cultures fed with synthetic VFA yielded statistically similar intracellular lipid content as batch cultures (29.9 ± 1.9%, g/g). However, batch cultures fed with VFA produced from the fermentation of food waste, yielded a lower lipid content (14.9 ± 0.1%, g/g). The lipid composition obtained with synthetic and food-waste-derived VFA was similar to commercial biodiesel feedstock. We therefore demonstrate the feasibility of linking biochemical waste treatment and biofuel production using VFA as key intermediates. PMID:25697838

  2. Sugar and volatile fatty acids dynamic during anaerobic treatment of olive mill wastewater.

    PubMed

    Fernandes, L R; Gomes, A C; Lopes, A; Albuquerque, A; Simões, R M

    2016-01-01

    Biogas production has been the main route used to exploit olive mill wastewater (OMW), after pretreatment and/or in combination with other effluents, but more recently the production of chemicals and biopolymers by biotechnological routes has deserved increasing attention by the scientific community. The present paper aims to explore the potential of fresh OMW as a source of volatile fatty acids (VFAs) and biogas. The time profile of VFAs production and the corresponding sugar consumption was followed by high-performance liquid chromatography, in batch anaerobic assays. The experimental results have revealed the very high potential of the OMW for the production of VFAs, mainly due to the high sugar concentration in the effluent (37.8 g/L) and its complete conversion into VFAs, in a time period of 2-3 days. The most abundant VFAs were acetic (48-50%), n-butanoic (12-27%), iso-pentanoic (12-14%) and propanoic (5-13%). The ratio of VFA containing even and odd carbon chains increased with the reduction in the initial chemical oxygen demand concentration of the samples used in the experiments. The conversion of the VFAs to biogas was inhibited at concentrations of 3.5 g/L of VFAs. PMID:26496487

  3. Volatile fatty acid impacts on nitrite oxidation and carbon dioxide fixation in activated sludge.

    PubMed

    Oguz, Merve T; Robinson, Kevin G; Layton, Alice C; Sayler, Gary S

    2006-02-01

    Batch test were performed to assess nitrite removal, nitrate formation, CO2 fixation, gaseous nitrogen production and microbial density in activated sludge exposed to volatile fatty acid (VFA) mixtures. Nitrite removal and nitrate formation were both affected by the presence of VFAs, but to different degrees. Nitrate formation rates were reduced to a greater extent (79%) than nitrite removal rates (36%) resulting in an apparent unbalanced nitrite oxidation reaction. Since the total bacterial density and the nitrite oxidizing bacteria (NOB, Nitrospira) concentration remained essentially constant under all test conditions, the reduction in rates was not due to heterotrophic uptake of nitrogen or to a decrease in the NOB population. In contrast to the nitrogen results, VFAs were not found to impact CO2 fixation efficiency. It appeared that nitrite oxidation occurred when VFAs were present since the oxidation of nitrite provides energy for CO2 fixation. However, nitrate produced from the oxidation of nitrite was reduced to gaseous nitrogen products. N2O gas was detected in the presence of VFAs which was a clear indication that VFAs stimulated an alternative pathway, such as aerobic denitrification, during biotransformation of nitrogen in activated sludge. PMID:16436292

  4. Bioelectrochemical recovery of waste-derived volatile fatty acids and production of hydrogen and alkali.

    PubMed

    Zhang, Yifeng; Angelidaki, Irini

    2015-09-15

    Volatile fatty acids (VFA) are organic compounds of great importance for various industries and environmental processes. Fermentation and anaerobic digestion of organic wastes are promising alternative technologies for VFA production. However, one of the major challenges is development of sustainable downstream technologies for VFA recovery. In this study, an innovative microbial bipolar electrodialysis cell (MBEDC) was developed to meet the challenge of waste-derived VFA recovery, produce hydrogen and alkali, and potentially treat wastewater. The MBEDC was operated in fed-batch mode. At an applied voltage of 1.2 V, a VFA recovery efficiency of 98.3%, H2 of 18.4 mL and alkali production presented as pH of 12.64 were obtained using synthetic fermentation broth. The applied voltage, initial VFA concentrations and composition were affecting the VFA recovery. The energy balance revealed that net energy (5.20-6.86 kWh/kg-VFA recovered) was produced at all the applied voltages (0.8-1.4 V). The coexistence of other anionic species had no negative effect on VFA transportation. The VFA concentration was increased 2.96 times after three consecutive batches. Furthermore, the applicability of MBEDC was successfully verified with digestate. These results demonstrate for the first time the possibility of a new method for waste-derived VFA recovery and valuable products production that uses wastewater as fuel and bacteria as catalyst. PMID:26057718

  5. Intrinsic degradation of volatile fatty acids in laboratory-compacted clayey soil

    NASA Astrophysics Data System (ADS)

    Hrapovic, L.; Rowe, R. K.

    2002-10-01

    Volatile fatty acids (VFAs) represent the major organic constituent of landfill leachate and provide the greatest potential for leachate induced organic contamination of groundwater (e.g. as represented by an increase in the concentration of dissolved organic carbon and chemical oxygen demand). Long-term diffusion tests were performed for laboratory-compacted clayey soil plugs exposed to continuous supply of synthetic leachate containing VFAs. Significant microbial activity developed upon exposure of the soil's indigenous microorganisms to these degradable contaminants. The growth of heterotrophic aerobic bacteria (HAB, which include facultative anaerobes), sulfate reducing bacteria (SRB) and methanogenic bacteria carrying out fermentation and mineralization of the VFAs became evident after 30-50 days of testing. The maximum microbial counts of (2-8)×10 8 and (0.1-1)×10 8 cfu/g for HAB and SRB were localized in the soil layer at the interface with the source of organic and inorganic nutrients. Regardless of this rapid growth in microbial population, the VFA consumption was small and measurable only after a lag of 140-180 days. It is considered that this lag of otherwise readily degradable organic compounds (such as VFAs) persisted due to a combination of the effects of a high initial concentration of these acids (2.4 g/l as dissolved organic carbon, DOC) applied to carbon starved soil microorganisms and the small pore size of the compacted clay. Once the significant amounts of gas were generated from fermentation, conditions developed for improved mass transport and exchange of the nutrients and bacteria and the outcome of the intrinsic degradation was more apparent. The breakdown of VFAs that followed after the lag was localized near the top of the soil and was characterized by a short half-life of 0.75-5 days for DOC (total VFAs as dissolved organic carbon).

  6. Characterization of Fatty Acid, Amino Acid and Volatile Compound Compositions and Bioactive Components of Seven Coffee (Coffea robusta) Cultivars Grown in Hainan Province, China.

    PubMed

    Dong, Wenjiang; Tan, Lehe; Zhao, Jianping; Hu, Rongsuo; Lu, Minquan

    2015-01-01

    Compositions of fatty acid, amino acids, and volatile compound were investigated in green coffee beans of seven cultivars of Coffea robusta grown in Hainan Province, China. The chlorogenic acids, trigonelline, caffeine, total lipid, and total protein contents as well as color parameters were measured. Chemometric techniques, principal component analysis (PCA), hierarchical cluster analysis (HCA), and analysis of one-way variance (ANOVA) were performed on the complete data set to reveal chemical differences among all cultivars and identify markers characteristic of a particular botanical origin of the coffee. The major fatty acids of coffee were linoleic acid, palmitic acid, oleic acid, and arachic acid. Leucine (0.84 g/100 g DW), lysine (0.63 g/100 g DW), and arginine (0.61 g/100 g DW) were the predominant essential amino acids (EAAs) in the coffee samples. Seventy-nine volatile compounds were identified and semi-quantified by HS-SPME/GC-MS. PCA of the complete data matrix demonstrated that there were significant differences among all cultivars, HCA supported the results of PCA and achieved a satisfactory classification performance. PMID:26389867

  7. Inoculation of the nonlegume Capsicum annuum L. with Rhizobium strains. 2. Changes in sterols, triterpenes, fatty acids, and volatile compounds.

    PubMed

    Silva, Luís R; Azevedo, Jessica; Pereira, Maria J; Carro, Lorena; Velazquez, Encarna; Peix, Alvaro; Valentão, Patrícia; Andrade, Paula B

    2014-01-22

    Peppers (Capsicum spp.) are consumed worldwide, imparting flavor, aroma, and color to foods, additionally containing high concentrations of biofunctional compounds. This is the first report about the effect of the inoculation of two Rhizobium strains on sterols, triterpenes, fatty acids, and volatile compounds of leaves and fruits of pepper (Capsicum annuum L.) plants. Generally, inoculation with strain TVP08 led to the major changes, being observed a decrease of sterols and triterpenes and an increase of fatty acids, which are related to higher biomass, growth, and ripening of pepper fruits. The increase of volatile compounds may reflect the elicitation of plant defense after inoculation, since the content on methyl salicylate was significantly increased in inoculated material. The findings suggest that inoculation with Rhizobium strains may be employed to manipulate the content of interesting metabolites in pepper leaves and fruits, increasing potential health benefits and defense abilities of inoculated plants. PMID:24405510

  8. Anchoring the Gas-Phase Acidity Scale from Hydrogen Sulfide to Pyrrole. Experimental Bond Dissociation Energies of Nitromethane, Ethanethiol, and Cyclopentadiene.

    PubMed

    Ervin, Kent M; Nickel, Alex A; Lanorio, Jerry G; Ghale, Surja B

    2015-07-16

    A meta-analysis of experimental information from a variety of sources is combined with statistical thermodynamics calculations to refine the gas-phase acidity scale from hydrogen sulfide to pyrrole. The absolute acidities of hydrogen sulfide, methanethiol, and pyrrole are evaluated from literature R-H bond energies and radical electron affinities to anchor the scale. Relative acidities from proton-transfer equilibrium experiments are used in a local thermochemical network optimized by least-squares analysis to obtain absolute acidities of 14 additional acids in the region. Thermal enthalpy and entropy corrections are applied using molecular parameters from density functional theory, with explicit calculation of hindered rotor energy levels for torsional modes. The analysis reduces the uncertainties of the absolute acidities of the 14 acids to within ±1.2 to ±3.3 kJ/mol, expressed as estimates of the 95% confidence level. The experimental gas-phase acidities are compared with calculations, with generally good agreement. For nitromethane, ethanethiol, and cyclopentadiene, the refined acidities can be combined with electron affinities of the corresponding radicals from photoelectron spectroscopy to obtain improved values of the C-H or S-H bond dissociation energies, yielding D298(H-CH2NO2) = 423.5 ± 2.2 kJ mol(-1), D298(C2H5S-H) = 364.7 ± 2.2 kJ mol(-1), and D298(C5H5-H) = 347.4 ± 2.2 kJ mol(-1). These values represent the best-available experimental bond dissociation energies for these species. PMID:25549109

  9. REMOVAL AND RECOVERY OF SULFIDE FROM TANNERY WASTEWATER

    EPA Science Inventory

    Recovery of sulfide from tannery waste was accomplished through acidification with sulfuric acid in a closed system and removing hydrogen sulfide formed by blowing with air. Sulfide was then absorbed in caustic solution to produce re-usable sodium sulfide/sulfhydrate liquor for t...

  10. Acid Saline Weathering of A Massive Sulfide and Gossan Formation: Implications for Development and Preservation of Biosignatures on Mars

    NASA Astrophysics Data System (ADS)

    Williams, A. J.; Sumner, D. Y.; Zierenberg, R. A.

    2010-12-01

    The surface of modern Mars is rich in S and Fe minerals. Variations in water activity and the weathering reactions of these minerals have been integral to developing Martian surface conditions during the last 2 Ga. Terrestrial gossans, especially those formed from acid-saline solutions at low water-rock ratio, provide an important analog for understanding how S and Fe minerals may have weathered on Mars. Acidophiles and chemolithotrophs have been identified in these environments on Earth, so they also comprise a model system for putative biosignature formation and preservation that is relevant to conditions on early Mars. The Iron Mountain massive sulfide deposit is capped by a gossan, parts of which were exposed at the surface prior to mining, and parts of which have been exposed for several decades. The deposit is located in seasonally dry northern CA with high late spring to early fall evaporation rates. Samples of pyrite, iron-oxide-rich, and sulfate-rich gossan were collected during the dry season in late spring 2010. Mineral species identified with SEM-EDS, XRD, and optical microscopy include: pyrite, goethite, lepitocrocite, hematite, schwartmanite, gypsum, quartz, and acanthite. As yet unidentified soluble sulfate minerals formed by evaporative concentration are also present. Distilled water added to a pyrite-sulfate sample yielded a pH of ~2.5 once the evaporites dissolved. The spatial variability of minerals and the extent of alteration provide the opportunity to study weathering gradients and solution/reprecipitation in this system. Putative microbial communities containing filaments have been observed in small patches on sample surfaces and in fractures with FEG-SEM and optical microscopy. Although present, textural features interpreted to have formed microbially are sparse. The relative paucity of microbial morphologies in this analog acid-saline system combined with their heterogeneous spatial distribution presents a challenge for remote detection by

  11. Production of volatiles in fresh-cut apple: effect of applying alginate coatings containing linoleic acid or isoleucine.

    PubMed

    Maya-Meraz, Irma O; Espino-Díaz, Miguel; Molina-Corral, Francisco J; González-Aguilar, Gustavo A; Jacobo-Cuellar, Juan L; Sepulveda, David R; Olivas, Guadalupe I

    2014-11-01

    One of the main quality parameters in apples is aroma, its main precursors are fatty acids (FA) and amino acids (AA). In this study, alginate edible coatings were used as carriers of linoleic acid or isoleucine to serve as precursors for the production of aroma in cut apples. Apple wedges were immersed in a CaCl2 solution and coated with one of the following formulations: alginate solution (Alg-Ca), Alg-Ca-low-level linoleic acid (0.61 g/Lt), (LFA), Alg-Ca-high-level linoleic acid (2.44 g/L; HFA), Alg-Ca-low-level isoleucine (0.61 g/L; LAA), and Alg-Ca-high-level isoleucine (2.44 g/L; HAA). Apple wedges were stored at 3 °C and 85% relative humidity for 21 d and key volatiles were studied during storage. Addition of precursors, mainly isoleucine, showed to increase the production of some key volatiles on coated fresh-cut apples during storage. The concentration of 2-methyl-1-butanol was 4 times higher from day 12 to day 21 in HAA, while 2-methyl butyl acetate increased from day 12 to day 21 in HAA. After 21 d, HAA-apples presented a 40-fold value of 2-methyl-butyl acetate, compared to Alg-Ca cut apples. Values of hexanal increased during cut apple storage when the coating carried linoleic acid, mainly on HFA, from 3 to 12 d. The ability of apples to metabolize AA and FA depends on the concentration of precursors, but also depends on key enzymes, previous apple storage, among others. Further studies should be done to better clarify the behavior of fresh-cut apples as living tissue to metabolize precursors contained in edible coatings for the production of volatiles. PMID:25296624

  12. Contrast of volatile fatty acid driven and inorganic acid or base driven phosphorus release and uptake in enhanced biological phosphorus removal.

    PubMed

    Randall, Andrew A

    2012-04-01

    Addition of an inorganic acid or base was detrimental to net phosphorus removals in short-term batch experiments, suggesting there might be system upset when pH changes. In contrast, addition of volatile fatty acids (VFAs) increased anaerobic phosphorus release and aerobic phosphorus uptake while maintaining or improving net phosphorus removals. The effect of pH change differed if the acid or base added was inorganic versus organic. Volatile fatty acids that resulted in poly-3-hydroxy-butyrate rather than poly-3-hydroxy-valerate resulted in greater net phosphorus removals, and this corresponded to differences in consumption of reducing equivalents. Acetic acid resulted in improved net phosphorus removal compared to sodium acetate, suggesting that acid forms of VFAs might be superior as supplemental VFAs. It is hypothesized that anaerobic phosphorus release following addition of inorganic acid is primarily a result of phosphorus and proton (H+) symport (excretion from the cell) for pH homeostasis, whereas addition of VFAs results in phosphorus and H+ release to maintain the proton motive force. PMID:22834218

  13. Mechanistic chemical perspective of hydrogen sulfide signaling.

    PubMed

    Nagy, Péter

    2015-01-01

    Hydrogen sulfide is now a well-appreciated master regulator in a diverse array of physiological processes. However, as a consequence of the rapid growth of the area, sulfide biology suffers from an increasing number of controversial observations and interpretations. A better understanding of the underlying molecular pathways of sulfide's actions is key to reconcile controversial issues, which calls for rigorous chemical/biochemical investigations. Protein sulfhydration and coordination/redox chemical interactions of sulfide with heme proteins are the two most extensively studied pathways in sulfide biochemistry. These pathways are important mediators of protein functions, generate bioactive sulfide metabolites, contribute to sulfide storage/trafficking and carry antioxidant functions. In addition, inorganic polysulfides, which are oxidative sulfide metabolites, are increasingly recognized as important players in sulfide biology. This chapter provides an overview of our mechanistic perspective on the reactions that govern (i) sulfide's bioavailability (including the delicate enzyme machineries that orchestrate sulfide production and consumption and the roles of the large sulfide-storing pools as biological buffers), (ii) biological significance and mechanisms of persulfide formation (including the reduction of disulfides, condensation with sulfenic acids, oxidation of thiols with polysulfides and radical-mediated pathways), (iii) coordination and redox chemical interactions of sulfide with heme proteins (including cytochrome c oxidase, hemoglobins, myoglobins and peroxidases), and (iv) the chemistry of polysulfides. PMID:25725513

  14. Acetate and other Volatile Fatty Acids - Key Intermediates in marine sediment metabolism - Thermodynamic and kinetic implications

    NASA Astrophysics Data System (ADS)

    Glombitza, C.; Jaussi, M.; Røy, H.; Jørgensen, B. B.

    2014-12-01

    Volatile fatty acids (VFAs) play important roles as key intermediates in the anaerobic metabolism of subsurface microbial communities. Usually they are present in marine sediment pore water in low concentrations as a result of balanced production and consumption, both occurring in the same sediment zone. Thus their low concentrations represent a steady state condition regulated by either thermodynamics or kinetics. We have developed a novel analytical approach for the parallel measurement of several VFAs directly from marine pore water without any sample pretreatment by the use of a 2-dimensional ion chromatography coupled to mass spectrometry. In a first study we analyzed acetate, formate, and propionate in pore water from sediment cores retrieved from 5 different stations within and offshore of the Godhåbsfjord (Greenland). The sediment cores represent different sedimentological conditions, ranging from a typical marine sedimentation site to a glacier/freshwater dominated site. In addition to VFA concentrations, we measured sulfate concentrations, sulfate reduction rates, and cell abundances. We calculated the Gibbs free energy (ΔG) available for sulfate reduction (SR), as well as the VFA turnover times by the in-situ SR rates. The turnover time for acetate by SR ranged from several hours to days in the top cm of sediment and increased to several hundred years at the bottom of the SR zone. From the associated cell abundances we calculated that the VFA turnover times were significantly longer than the diffusion times of the VFA between individual cells. This shows that VFA consumption in the SR zone, and concomitantly the observed pore water concentrations, are not constrained by diffusion. DG values for SR using acetate were >36 kJ/mol which is significantly above the lower limit for anaerobic microbial energy metabolism. It thus remains unclear what controls the VFA concentrations in the sediment.

  15. Volatile Fatty Acid Production by the Hindgut Microbiota of Xylophagous Termites †

    PubMed Central

    Odelson, David A.; Breznak, John A.

    1983-01-01

    Acetate dominated the extracellular pool of volatile fatty acids (VFAs) in the hindgut fluid of Reticulitermes flavipes, Zootermopsis angusticollis, and Incisitermes schwarzi, where it occurred at concentrations of 57.9 to 80.6 mM and accounted for 94 to 98 mol% of all VFAs. Small amounts of C3 to C5 VFAs were also observed. Acetate was also the major VFA in hindgut homogenates of Schedorhinotermes lamanianus, Prorhinotermes simplex, Coptotermes formosanus, and Nasutitermes corniger. Estimates of in situ acetogenesis by the hindgut microbiota of R. flavipes (20.2 to 43.3 nmol · termite−1 · h−1) revealed that this activity could support 77 to 100% of the respiratory requirements of the termite (51.6 to 63.6 nmol of O2 · termite−1 · h−1). This conclusion was buttressed by the demonstration of acetate in R. flavipes hemolymph (at 9.0 to 11.6 mM), but not in feces, and by the ability of termite tissues to readily oxidize acetate to CO2. About 85% of the acetate produced by the hindgut microbiota was derived from cellulose C; the remainder was derived from hemicellulose C. Selective removal of major groups of microbes from the hindgut of R. flavipes indicated that protozoa were primarily responsible for acetogenesis but that bacteria also functioned in this capacity. H2 and CH4 were evolved by R. flavipes (usually about 0.4 nmol · termite−1 · h−1), but these compounds represented a minor fate of electrons derived from wood dissimilation within R. flavipes. A working model is proposed for symbiotic wood polysaccharide degradation in R. flavipes, and the possible roles of individual gut microbes, including CO2-reducing acetogenic bacteria, are discussed. PMID:16346296

  16. Microscale Biosensor for Measurement of Volatile Fatty Acids in Anoxic Environments

    PubMed Central

    Meyer, Rikke Louise; Larsen, Lars Hauer; Revsbech, Niels Peter

    2002-01-01

    A microscale biosensor for acetate, propionate, isobutyrate, and lactate is described. The sensor is based on the bacterial respiration of low-molecular-weight, negatively charged species with a concomitant reduction of NO3− to N2O. A culture of denitrifying bacteria deficient in N2O reductase was immobilized in front of the tip of an electrochemical N2O microsensor. The bacteria were separated from the outside environment by an ion-permeable membrane and supplied with nutrients (except for electron donors) from a medium reservoir behind the N2O sensor. The signal of the sensor, which corresponded to the rate of N2O production, was proportional to the supply of the electron donor to the bacterial mass. The selectivity for volatile fatty acids compared to other organic compounds was increased by selectively enhancing the transport of negatively charged compounds into the sensor by electrophoretic migration (electrophoretic sensitivity control). The sensor was susceptible to interference from O2, N2O, NO2−, H2S, and NO3−. Interference from NO3− was low and could be quantified and accounted for. The detection limit was equivalent to about 1 μM acetate, and the 90% response time was 30 to 90 s. The response of the sensor was not affected by changes in pH between 5.5 and 9 and was also unaffected by changes in salinity in the range of 2 to 32‰. The functioning of the sensor over a temperature span of 7 to 30°C was investigated. The concentration range for a linear response was increased five times by increasing the temperature from 7 to 19.5°C. The life span of the biosensor varied between 1 and 3 weeks after manufacturing. PMID:11872469

  17. On-line removal of volatile fatty acids from CELSS anaerobic bioreactor via nanofiltration

    NASA Technical Reports Server (NTRS)

    Colon, Guillermo

    1995-01-01

    The CELSS (controlled ecological life support system) resource recovery system, which is a waste processing system, uses aerobic and anaerobic bioreactors to recover plants nutrients and secondary foods from the inedible biomass. The anaerobic degradation of the inedible biomass by means of culture of rumen bacteria,generates organic compounds such as volatile fatty acids (acetic, propionic, butyric, VFA) and ammonia. The presence of VFA in the bioreactor medium at fairly low concentrations decreases the microbial population's metabolic reactions due to end-product inhibition. Technologies to remove VFA continuously from the bioreactor are of high interest. Several candidate technologies were analyzed, such as organic solvent liquid-liquid extraction, adsorption and/or ion exchange, dialysis, electrodialysis, and pressure driven membrane separation processes. The proposed technique for the on-line removal of VFA from the anaerobic bioreactor was a nanofiltration membrane recycle bioreactor. In order to establish the nanofiltration process performance variables before coupling it to the bioreactor, a series of experiments were carried out using a 10,000 MWCO tubular ceramic membrane module. The variables studied were the bioreactor slurry permeation characteristics, such as, the permeate flux, VFA and the nutrient removal rates as a function of applied transmembrane pressure, fluid recirculation velocity, suspended matter concentration, and process operating time. Results indicate that the permeate flux, VFA and nutrients removal rates are directly proportional to the fluid recirculation velocity in the range between 0.6 to 1.0 m/s, applied pressure when these are low than 1.5 bar, and inversely proportional to the total suspended solids concentration in the range between 23,466 to 34,880. At applied pressure higher than 1.5 bar the flux is not more linearly dependent due to concentration polarization and fouling effects over the membrange surface. It was also found

  18. Sulfur and sulfides in chondrules

    NASA Astrophysics Data System (ADS)

    Marrocchi, Yves; Libourel, Guy

    2013-10-01

    The nature and distribution of sulfides within type I PO, POP and PP chondrules of the carbonaceous chondrite Vigarano (CV3) have been studied by secondary electron microscopy and electron microprobe. They occur predominantly as spheroidal blebs composed entirely of low-Ni iron sulfide (troilite, FeS) or troilite + magnetite but in less abundance in association with metallic Fe-Ni beads in opaque assemblages. Troilites are mainly located within the low-Ca pyroxene outer zone and their amounts increase with the abundance of low-Ca pyroxene within chondrules, suggesting co-crystallization of troilite and low-Ca pyroxene during high-temperature events. We show that sulfur concentration and sulfide occurrence in chondrules obey high temperature sulfur solubility and saturation laws. Depending on the fS2 and fO2 of the surrounding gas and on the melt composition, mainly the FeO content, sulfur dissolved in chondrule melts may eventually reach a concentration limit, the sulfur content at sulfide saturation (SCSS), at which an immiscible iron sulfide liquid separates from the silicate melt. The occurrence of both a silicate melt and an immiscible iron sulfide liquid is further supported by the non-wetting behavior of sulfides on silicate phases in chondrules due to the high interfacial tension between their precursor iron-sulfide liquid droplets and the surrounding silicate melt during the high temperature chondrule-forming event. The evolution of chondrule melts from PO to PP towards more silicic compositions, very likely due to high PSiO(g) of the surrounding nebular gas, induces saturation of FeS at much lower S content in PP than in PO chondrules, leading to the co-crystallization of iron sulfides and low-Ca pyroxenes. Conditions of co-saturation of low-Ca pyroxene and FeS are only achieved in non canonical environments characterized by high partial pressures of sulfur and SiO and redox conditions more oxidizing than IW-3. Fe and S mass balance calculations also

  19. Field method for sulfide determination

    SciTech Connect

    Wilson, B L; Schwarser, R R; Chukwuenye, C O

    1982-01-01

    A simple and rapid method was developed for determining the total sulfide concentration in water in the field. Direct measurements were made using a silver/sulfide ion selective electrode in conjunction with a double junction reference electrode connected to an Orion Model 407A/F Specific Ion Meter. The method also made use of a sulfide anti-oxidant buffer (SAOB II) which consists of ascorbic acid, sodium hydroxide, and disodium EDTA. Preweighed sodium sulfide crystals were sealed in air tight plastic volumetric flasks which were used in standardization process in the field. Field standards were prepared by adding SAOB II to the flask containing the sulfide crystals and diluting it to the mark with deionized deaerated water. Serial dilutions of the standards were used to prepare standards of lower concentrations. Concentrations as low as 6 ppB were obtained on lake samples with a reproducibility better than +- 10%.

  20. Online monitoring of concentration and dynamics of volatile fatty acids in anaerobic digestion processes with mid-infrared spectroscopy.

    PubMed

    Falk, Harry Michael; Reichling, Peter; Andersen, Christian; Benz, Roland

    2015-02-01

    An ATR-MIR-FTIR spectrometer was integrated into a laboratory scale anaerobic digestion setup. Automatically, a sludge sample from the digester was transferred to a measurement cell; an IR spectrum was recorded and evaluated by chemometric models to estimate the concentration of the individual volatile fatty acids (VFA). The calibration set included semi-artificial samples spiked with known concentrations of the VFA as well as original samples from a continuous fermentation. High-performance liquid chromatography (HPLC) was used as a reference analysis of the samples. The models were optimized for a low root mean square error of prediction (RMSEP). R(2) for acetic acid, propionic acid, isobutyric acid, butyric acid, valeric acid, and isovaleric acid were 0.94, 0.88, 0.83, 0.75, 0.59, and 0.90, respectively. The accuracy of the models was validated in a second experiment. Considering the complex and heterogeneous sludge composition and the chemical similarity of VFA, absolute concentration and dynamic (increasing and decreasing concentration of VFA) was predicted well for acetic, propionic, isobutyric, and isovaleric acid (in their respective concentration range); Butyric acid could not be detected. The installed setup was able to gather and measure native samples from the digester (every 2 h) automatically over a period of 6 months without problems of clogging or biofouling. The instant and continuous analysis of the concentration of the VFA made it possible to evaluate the current bioprocess status and adjust the organic loading rate accordingly. PMID:25142153

  1. Enhancement of propionic acid fraction in volatile fatty acids produced from sludge fermentation by the use of food waste and Propionibacterium acidipropionici.

    PubMed

    Chen, Yinguang; Li, Xiang; Zheng, Xiong; Wang, Dongbo

    2013-02-01

    Volatile fatty acids (VFA) can be used as the additional carbon source of biological nutrient removal (BNR), and the increase of propionic acid percentage in VFA has been reported to facilitate the performance of BNR. In this study a new method for significantly improving the propionic acid fraction in VFA derived from waste activated sludge was reported, which included (1) mixing food waste with sludge and pre-fermenting the mixture (first stage), and (2) separating the mixture, sterilizing the pre-fermentation liquid and fermenting it after inoculating Propionibacterium acidipropionici (second stage). By optimizing the first stage with response surface methodology, a propionic acid content of 68.4% with propionic acid concentration of 7.13 g COD/L could be reached in the second stage, which was much higher than that reported previously. Lactic acid was found to be the most abundant product of the first stage and it served as the substrate for propionic acid production in the second stage. Further investigation showed that during the first stage the addition of food waste to the pre-fermentation system of sludge significantly increased the generation of lactic acid due to the synergistic effect, which resulted in the improvement of propionic acid production in the second stage. Finally, the use of propionic acid-enriched VFA as a superior carbon source of BNR was tested, and its performance was observed to be much better than using acetic acid-enriched VFA derived from sludge by the previously documented method. PMID:23219005

  2. Key volatile organic compounds emitted from swine nursery house

    NASA Astrophysics Data System (ADS)

    Yao, H. Q.; Choi, H. L.; Zhu, K.; Lee, J. H.

    2011-05-01

    This study was carried out to quantify the concentration and emission levels of key volatile organic compounds (VOCs) - sulfides, indolics, phenolics and volatile fatty acids (VFA) - emitted from swine nursery house, and assess the effect of microclimate (including temperature, relative humidity and air speed) on the key odorous compounds. Samples were collected from the Experimental Farm of Seoul National University in Suwon, South Korea. And the collection took place for four seasons and the sampling time was fixed at 10:30 in the morning. The application of one-way ANOVA and Bonferroni t analyses revealed that, most of the odorous compound concentrations, such as dimethyl sulfide (DMS), dimethyl disulfide (DMDS), indole, p-cresol and all the volatile fatty acids were lowest during the summer ( P < 0.01). Meanwhile, negative correlations were observed between temperature and odorants, as well as air speed and odorants. A possible reason was that high ventilation transferred most of the odors out of the house during the summer. From the whole year data, non-linear multiple regressions were conducted and the equations were proposed depending upon the relationships between microclimate parameters and odorous compounds. The equations were applied in hope of easily calculating the concentrations of the odorous compounds in the commercial farms. The results obtained in this study should be used for reducing the volatile organic compounds by controlling microclimate parameters and also could be helpful in setting a guideline for good management practices in nursery house.

  3. Formic and Acetic Acids in Degradation Products of Plant Volatiles Elicit Olfactory and Behavioral Responses from an Insect Vector.

    PubMed

    George, Justin; Robbins, Paul S; Alessandro, Rocco T; Stelinski, Lukasz L; Lapointe, Stephen L

    2016-05-01

    Volatile phytochemicals play a role in orientation by phytophagous insects. We studied antennal and behavioral responses of the Asian citrus psyllid, Diaphorina citri, vector of the citrus greening disease pathogen. Little or no response to citrus leaf volatiles was detected by electroantennography. Glass cartridges prepared with β-ocimene or citral produced no response initially but became stimulatory after several days. Both compounds degraded completely in air to a number of smaller molecules. Two peaks elicited large antennal responses and were identified as acetic and formic acids. Probing by D. citri of a wax substrate containing odorants was significantly increased by a blend of formic and acetic acids compared with either compound separately or blends containing β-ocimene and/or citral. Response surface modeling based on a 4-component mixture design and a 2-component mixture-amount design predicted an optimal probing response on wax substrate containing a blend of formic and acetic acids. Our study suggests that formic and acetic acids play a role in host selection by D. citri and perhaps by phytophagous insects in general even when parent compounds from which they are derived are not active. These results have implications for the investigation of arthropod olfaction and may lead to elaboration of attract-and-kill formulations to reduce nontarget effects of chemical control in agriculture. PMID:26857741

  4. Microbial community structure and sulfur biogeochemistry in mildly-acidic sulfidic geothermal springs in Yellowstone National Park.

    PubMed

    Macur, R E; Jay, Z J; Taylor, W P; Kozubal, M A; Kocar, B D; Inskeep, W P

    2013-01-01

    Geothermal and hydrothermal waters often contain high concentrations of dissolved sulfide, which reacts with oxygen (abiotically or biotically) to yield elemental sulfur and other sulfur species that may support microbial metabolism. The primary goal of this study was to elucidate predominant biogeochemical processes important in sulfur biogeochemistry by identifying predominant sulfur species and describing microbial community structure within high-temperature, hypoxic, sulfur sediments ranging in pH from 4.2 to 6.1. Detailed analysis of aqueous species and solid phases present in hypoxic sulfur sediments revealed unique habitats containing high concentrations of dissolved sulfide, thiosulfate, and arsenite, as well as rhombohedral and spherical elemental sulfur and/or sulfide phases such as orpiment, stibnite, and pyrite, as well as alunite and quartz. Results from 16S rRNA gene sequencing show that these sediments are dominated by Crenarchaeota of the orders Desulfurococcales and Thermoproteales. Numerous cultivated representatives of these lineages, as well as the Thermoproteales strain (WP30) isolated in this study, require complex sources of carbon and respire elemental sulfur. We describe a new archaeal isolate (strain WP30) belonging to the order Thermoproteales (phylum Crenarchaeota, 98% identity to Pyrobaculum/Thermoproteus spp. 16S rRNA genes), which was obtained from sulfur sediments using in situ geochemical composition to design cultivation medium. This isolate produces sulfide during growth, which further promotes the formation of sulfide phases including orpiment, stibnite, or pyrite, depending on solution conditions. Geochemical, molecular, and physiological data were integrated to suggest primary factors controlling microbial community structure and function in high-temperature sulfur sediments. PMID:23231658

  5. Total volatile fatty acid concentrations are unreliable estimators of treatment effects on ruminal fermentation in vivo.

    PubMed

    Hall, M B; Nennich, T D; Doane, P H; Brink, G E

    2015-06-01

    Volatile fatty acid concentrations ([VFA], mM) have long been used to assess the effect of dietary treatments on ruminal fermentation in vivo. However, discrepancies in statistical results between [VFA] and VFA pool size (VFAmol) possibly related to ruminal digesta liquid amount (LIQ, kg) indicate potential issues with the use of [VFA]. We investigated relationships among [VFA], VFAmol, and LIQ measured 2 h postfeeding using individual lactating cow data (n=175) from 7 separate feeding studies. Regression analyses were performed using mixed models with "study" as a discrete random variable. The mean across studies and average range of values within studies, respectively, were 151 and 75 for [VFA], 11.2 and 9.8 for VFAmol, 73.3 and 41.0 for LIQ, and 289 and 83 mmol/kg for rumen fluid osmolality. Liquid amount changed with VFAmol (3.76 VFAmol+31.2; average within-study R2=0.69), but the relationship was weak between [VFA] and LIQ (0.524 LIQ+112.8; average within-study R2=0.12). The relationship between LIQ and VFAmol was likely a function of the osmotic gradient between rumen liquid and blood. The VFA are a major ruminal solute; VFAmol amounts can affect water flux in the rumen as similar tonicities of rumen fluid and blood are maintained. This also has a damping effect on ruminal solute concentration, creating the weak relationship between [VFA] and LIQ. Within studies, similar [VFA] were found in LIQ differing by 30 kg or more. The difference between minimum and maximum LIQ within cow within study was 12.7 kg (standard deviation=7.1), so inclusion of "cow" in analyses did not correct for the variation in LIQ. To allow valid comparisons of experimental treatments, responses must be on an equivalent basis; concentrations in different LIQ are not on an equivalent basis and so are not valid to use for comparing treatment effects. The [VFA] changed with VFAmol (5.80 VFAmol+86.3; average within-study R2=0.56). However, the ratio of [VFA] to VFAmol ranged from 9.0 to 24

  6. Production of polyhydroxyalkanoate (PHA) by Ralstonia eutropha JMP 134 with volatile fatty acids from palm oil mill effluent as precursors.

    PubMed

    Setiadi, Tjandra; Aznury, Martha; Trianto, Azis; Pancoro, Adi

    2015-01-01

    The highest volatile fatty acids (VFAs) concentration from palm oil mill effluent (POME) treated by anaerobic fermentation was achieved for a 1-day process when the main acids used were acetic, propionic and butyric acids. Polyhydroxyalkanoate (PHA) production with VFAs from POME as precursors in the fed-batch mode has advantages over batch mode, both in terms of its productivity and 3HV (3-hydroxyvalerate) composition in the produced polymer. With the fed batch, the productivity increased to 343% and contained more 3HV than those of the batch. The structures of the PHA were identified by different methods and they supported each other; the resulting products consisted of functional groups of 3HB (3-hydroxybutyrate) and 3HV. PMID:26606081

  7. Regeneration of lactic and succinic acid-laden basic sorbents by leaching with a volatile base in an organic solvent

    SciTech Connect

    Husson, S.M.; King, C.J. |

    1998-08-01

    Leaching with an organic solution of a volatile base was explored as a method of regenerating tertiary amine and pyridyl sorbents. Experimental data are presented that show that regeneration efficiency correlated with the nonaqueous basicity of the regenerant as measured by the Gutmann donicity scale. Essentially complete regeneration of lactic acid-laden Dowex MWA-1 was achieved when 8--10 mol of trimethylamine were present for every mole of adsorbed acid; adequate (>70%) regeneration was obtained at a 2:1 molar ratio. The resulting trimethylamine-lactic acid complex can be thermally decomposed fully when trimethylamine is employed in an organic solvent instead of in water. A likely cause of the incomplete thermal decomposition of trimethylammonium lactate in previous, water-based systems is the aqueous environment in which the decomposition was performed.

  8. Selenium sulfide

    Integrated Risk Information System (IRIS)

    Selenium sulfide ; CASRN 7446 - 34 - 6 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinogenic

  9. Hydrogen sulfide

    Integrated Risk Information System (IRIS)

    Hydrogen sulfide ; 7783 - 06 - 4 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinogenic Effec

  10. Carbonyl sulfide

    Integrated Risk Information System (IRIS)

    Carbonyl sulfide ; CASRN 463 - 58 - 1 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarcinogenic

  11. Medium chain length polyhydroxyalkanoate (mcl-PHA) production from volatile fatty acids derived from the anaerobic digestion of grass.

    PubMed

    Cerrone, Federico; Choudhari, Santosh K; Davis, Reeta; Cysneiros, Denise; O'Flaherty, Vincent; Duane, Gearoid; Casey, Eoin; Guzik, Maciej W; Kenny, Shane T; Babu, Ramesh P; O'Connor, Kevin

    2014-01-01

    A two step biological process for the conversion of grass biomass to the biodegradable polymer medium chain length polyhydroxyalkanoate (mcl-PHA) was achieved through the use of anaerobic and aerobic microbial processes. Anaerobic digestion (mixed culture) of ensiled grass was achieved with a recirculated leach bed bioreactor resulting in the production of a leachate, containing 15.3 g/l of volatile fatty acids (VFAs) ranging from acetic to valeric acid with butyric acid predominating (12.8 g/l). The VFA mixture was concentrated to 732.5 g/l with a 93.3 % yield of butyric acid (643.9 g/l). Three individual Pseudomonas putida strains, KT2440, CA-3 and GO16 (single pure cultures), differed in their ability to grow and accumulate PHA from VFAs. P. putida CA-3 achieved the highest biomass and PHA on average with individual fatty acids, exhibited the greatest tolerance to higher concentrations of butyric acid (up to 40 mM) compared to the other strains and exhibited a maximum growth rate (μMAX = 0.45 h⁻¹). Based on these observations P. putida CA-3 was chosen as the test strain with the concentrated VFA mixture derived from the AD leachate. P. putida CA-3 achieved 1.56 g of biomass/l and accumulated 39 % of the cell dry weight as PHA (nitrogen limitation) in shake flasks. The PHA was composed predominantly of 3-hydroxydecanoic acid (>65 mol%). PMID:24162086

  12. Priming by Hexanoic Acid Induce Activation of Mevalonic and Linolenic Pathways and Promotes the Emission of Plant Volatiles.

    PubMed

    Llorens, Eugenio; Camañes, Gemma; Lapeña, Leonor; García-Agustín, Pilar

    2016-01-01

    Hexanoic acid (Hx) is a short natural monocarboxylic acid present in some fruits and plants. Previous studies reported that soil drench application of this acid induces effective resistance in tomato plants against Botrytis cinerea and Pseudomonas syringae and in citrus against Alternaria alternata and Xanthomonas citri. In this work, we performed an in deep study of the metabolic changes produced in citrus by the application of Hx in response to the challenge pathogen A. alternata, focusing on the response of the plant. Moreover, we used (13)C labeled hexanoic to analyze its behavior inside the plants. Finally, we studied the volatile emission of the treated plants after the challenge inoculation. Drench application of (13)C labeled hexanoic demonstrated that this molecule stays in the roots and is not mobilized to the leaves, suggesting long distance induction of resistance. Moreover, the study of the metabolic profile showed an alteration of more than 200 molecules differentially induced by the application of the compound and the inoculation with the fungus. Bioinformatics analysis of data showed that most of these altered molecules could be related with the mevalonic and linolenic pathways suggesting the implication of these pathways in the induced resistance mediated by Hx. Finally, the application of this compound showed an enhancement of the emission of 17 volatile metabolites. Taken together, this study indicates that after the application of Hx this compound remains in the roots, provoking molecular changes that may trigger the defensive response in the rest of the plant mediated by changes in the mevalonic and linolenic pathways and enhancing the emission of volatile compounds, suggesting for the first time the implication of mevalonic pathway in response to hexanoic application. PMID:27148319

  13. Priming by Hexanoic Acid Induce Activation of Mevalonic and Linolenic Pathways and Promotes the Emission of Plant Volatiles

    PubMed Central

    Llorens, Eugenio; Camañes, Gemma; Lapeña, Leonor; García-Agustín, Pilar

    2016-01-01

    Hexanoic acid (Hx) is a short natural monocarboxylic acid present in some fruits and plants. Previous studies reported that soil drench application of this acid induces effective resistance in tomato plants against Botrytis cinerea and Pseudomonas syringae and in citrus against Alternaria alternata and Xanthomonas citri. In this work, we performed an in deep study of the metabolic changes produced in citrus by the application of Hx in response to the challenge pathogen A. alternata, focusing on the response of the plant. Moreover, we used 13C labeled hexanoic to analyze its behavior inside the plants. Finally, we studied the volatile emission of the treated plants after the challenge inoculation. Drench application of 13C labeled hexanoic demonstrated that this molecule stays in the roots and is not mobilized to the leaves, suggesting long distance induction of resistance. Moreover, the study of the metabolic profile showed an alteration of more than 200 molecules differentially induced by the application of the compound and the inoculation with the fungus. Bioinformatics analysis of data showed that most of these altered molecules could be related with the mevalonic and linolenic pathways suggesting the implication of these pathways in the induced resistance mediated by Hx. Finally, the application of this compound showed an enhancement of the emission of 17 volatile metabolites. Taken together, this study indicates that after the application of Hx this compound remains in the roots, provoking molecular changes that may trigger the defensive response in the rest of the plant mediated by changes in the mevalonic and linolenic pathways and enhancing the emission of volatile compounds, suggesting for the first time the implication of mevalonic pathway in response to hexanoic application. PMID:27148319

  14. Can the development and autolysis of lactic acid bacteria influence the cheese volatile fraction? The case of Grana Padano.

    PubMed

    Lazzi, Camilla; Povolo, Milena; Locci, Francesco; Bernini, Valentina; Neviani, Erasmo; Gatti, Monica

    2016-09-16

    In this study, the relationship between the dynamics of the growth and lysis of lactic acid bacteria in Grana Padano cheese and the formation of the volatile flavor compounds during cheese ripening was investigated. The microbial dynamics of Grana Padano cheeses that were produced in two different dairies were followed during ripening. The total and cultivable lactic microflora, community composition as determined by length heterogeneity-PCR (LH-PCR), and extent of bacterial lysis using an intracellular enzymatic activity assay were compared among cheeses after 2, 6 and 13months of ripening in two dairies. The evolution of whole and lysed microbiota was different between the two dairies. In dairy 2, the number of total cells was higher than that in dairy 1 in all samples, and the number of cells that lysed during ripening was lower. In addition, at the beginning of ripening (2months), the community structure of the cheese from dairy 2 was more complex and was composed of starter lactic acid bacteria (Lactobacillus helveticus and Lactobacillus delbrueckii) and NSLAB, possibly arising from raw milk, including Lactobacillus rhamnosus/Lactobacillus casei and Pediococcus acidilactici. On the other hand, the cheese from dairy 1 that ripened for 2months was mainly composed of the SLAB L. helveticus and L. delbrueckii. An evaluation of the free-DNA fraction through LH-PCR identified those species that had a high degree of lysis. Data on the dynamics of bacterial growth and lysis were evaluated with respect to the volatile profile and the organic acid content of the two cheeses after 13months of ripening, producing very different results. Cheese from dairy 1 showed a higher content of free fatty acids, particularly those deriving from milk fat lipolysis, benzaldehyde and organic acids, such as pGlu and citric. In contrast, cheese from dairy 2 had a greater amount of ketones, alcohols, hydrocarbons, acetic acid and propionic acid. Based on these results, we can conclude that

  15. Effect of leachate recirculation and aeration on volatile fatty acid concentrations in aerobic and anaerobic landfill leachate.

    PubMed

    Bilgili, M Sinan; Demir, Ahmet; Varank, Gamze

    2012-02-01

    The main aim of this study was to investigate the effect of leachate recirculation and aeration on volatile fatty acid (VFA) concentrations in aerobic and anaerobic landfill leachate samples. In this study, two aerobic (A1, A2) and two anaerobic (AN1, AN2) reactors with (A1, AN1) and without (A2, AN2) leachate recirculation were used in order to determine the change of volatile fatty acids components in landfill leachate. VFA degradation rate was almost 100% in each reactor but the degradation rate show notable differences. In aerobic landfill reactors, total VFA concentrations decreased below 1000 mg L(-1) after 120 days of operation and only caproic and acetic acids were determined at this time. The stabilization of the VFA concentrations takes about 350 and 450 days for AN1 and AN2 reactors, respectively. VFA concentrations were higher than that of aerobic reactors because of the acidogenic phase occurred in anaerobic environment. According to the results of VFA components, the stabilization of the waste was achieved after 120 days of operation in aerobic landfills. At this time, anaerobic reactors were in the acidogenic phase which results with the high concentrations of VFA. The results also indicated that leachate recirculation does not affect the degradation rate in aerobic landfills as much as it does in anaerobic landfills. PMID:21930522

  16. Alcohol, volatile fatty acid, phenol, and methane emissions from dairy cows and fresh manure

    Technology Transfer Automated Retrieval System (TEKTRAN)

    There are approximately 2.5 million dairy cows in California. Emission inventories list dairy cows and their waste as the major source of regional air pollutants, but data on their actual emissions remain sparse, particularly for smog-forming volatile organic compounds (VOC) and greenhouse gases (GH...

  17. Green leaf volatiles, fire and nonanoic acid activate MAPkinases in the model grass species Lolium temulentum

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Forage and turf related grasses are utilized in diverse environments where they are routinely subjected to herbicides and exposed to fire and volatiles after cutting, however very little is known concerning the perception or molecular responses to these different stresses or compounds. In the model ...

  18. Effect of training systems on fatty acids and their derived volatiles in Cabernet Sauvignon grapes and wines of the north foot of Mt. Tianshan.

    PubMed

    Xu, Xiao-Qing; Cheng, Guo; Duan, Liang-Liang; Jiang, Ren; Pan, Qiu-Hong; Duan, Chang-Qing; Wang, Jun

    2015-08-15

    C6 and C9 volatiles, originated from fatty acids, are important volatiles for 'Cabernet Sauvignon' grapes and wines. This study evaluated the influence of different training systems including Modified Vertical Shoot Positioned, (M-VSP); Fan training system with two trunks (F-TT); Fan training system with multiple trunks (F-MT) on these volatiles and the long-chain fatty acids (>C12) of grape berries and wines in the northwest of China. The expression profiles of genes from associated metabolic pathway were also analyzed. F-MT training resulted in lower vine vigor, larger yield, higher content of unsaturated fatty acids in grapes and lower C6 esters in wines in comparison with M-VSP and F-TT. M-VSP and F-TT enhanced C6 volatiles in grape berries. The concentrations of C6 volatiles were positively correlated with the expression of VvLOXA and VvHPL1. The results expanded the knowledge of the influence of training systems on fatty acids and their derived volatiles of grapes and wines. PMID:25794740

  19. Proteinase-producing halophilic lactic acid bacteria isolated from fish sauce fermentation and their ability to produce volatile compounds.

    PubMed

    Udomsil, Natteewan; Rodtong, Sureelak; Tanasupawat, Somboon; Yongsawatdigul, Jirawat

    2010-07-15

    Halophilic lactic acid bacteria were isolated from fish sauce mashes fermented at 1 to 12 months. Seven out of sixty-four isolates were selected according to their proteolytic activity and growth at 25% NaCl for characterization and investigation of volatile compound production. All selected isolates were Gram-positive cocci with pairs/tetrads and grew at 0-25% NaCl, pH 4.5-9.0. Results of 16S rRNA gene sequence analysis showed 99% homology to Tetragenococcus halophilus ATCC 33315. The restriction fragment length polymorphism (RFLP) patterns of all isolates were also similar to those of T. halophilus ATCC 33315. These isolates were, thus, identified as T. halophilus. All isolates hydrolyzed fish protein in the medium containing 25% NaCl. Intracellular aminopeptidase of 7 isolates exhibited the highest activity of 2.85-3.67 U/ml toward Ala-p-nitroanilide (Ala-pNA). T.halophilus strains MS33 and M11 showed the highest alanyl aminopeptidase activity (P<0.05), and produced histamine in mGYP broth containing 5 and 25% NaCl in the level of 6.62-22.55 and 13.14-20.39 mg/100ml, respectively. Predominant volatile compounds of fish broth containing 25% NaCl inoculated with T. halophilus MS33 and MRC5-5-2 were 1-propanol, 2-methylpropanal, and benzaldehyde, corresponding to major volatile compounds in fish sauce. T.halophilus appeared to play an important role in volatile compound formation during fish sauce fermentation. PMID:20541276

  20. Production of medium-chain volatile fatty acids by mixed ruminal microorganisms is enhanced by ethanol in co-culture with Clostridium kluyveri

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Fermentative production of medium-chain (C5-C8) volatile fatty acids by the carboxylate platform has several potential advantages as a route to biofuel precursors. However, its practicality is limited by the relatively slow synthesis of these acids from shorter precursors (C2-C4) that accumulate dur...

  1. Photoinduced chemical reactions on natural single crystals and synthesized crystallites of mercury(II) sulfide in aqueous solution containing naturally occurring amino acids.

    PubMed

    Pal, Bonamali; Ikeda, Shigeru; Ohtani, Bunsho

    2003-03-10

    Photoirradiation at >300 nm of aqueous suspensions of several natural crystal specimens and synthesized crystallites of mercury(II) sulfide (HgS) induced deaminocyclization of optically active or racemic lysine into pipecolinic acid (PCA) under deaerated conditions. This is the first example, to the best of our knowledge, of photoinduced chemical reactions of natural biological compounds over natural minerals. It was found that the natural HgS crystals had activity higher than those of synthesized ones but lower than those of other sulfides of transition metals, e.g., CdS and ZnS, belonging to the same II-IV chalcogenides. In almost all of the photoreactions, decompostion of HgS occurred to liberate hydrogen sulfide (H(2)S) and Hg(2+), and the latter seemed to have undergone in-situ reductive deposition on HgS as Hg(0) after a certain induction period (24-70 h) during the photoirradiation, as indicated by the darkened color of the suspensions. The formation of PCA, presumably through combination of oxidation of lysine and reduction of an intermediate, cyclic Schiff base, could also be seen after a certain induction time of the Hg(0) formation. This was supported by the fact that the addition of small amount of Hg(2+) (0.5 wt % of HgS) increased the PCA yield by almost 2-fold. We also tried to elucidate certain aspects of the plausible stereochemical reactions in relation to the chiral crystal structure of HgS. Although, in some experiments, slight enantiomeric excess of the product PCA was observed, the excess was below or equal to the experimental error and no other supporting analytical data could not be obtained; we cannot conclude the enantiomeric photoproduction of PCA by the natural chiral HgS specimen. PMID:12611518

  2. Temperature and solids retention time control microbial population dynamics and volatile fatty acid production in replicated anaerobic digesters

    PubMed Central

    Vanwonterghem, Inka; Jensen, Paul D.; Rabaey, Korneel; Tyson, Gene W.

    2015-01-01

    Anaerobic digestion is a widely used technology for waste stabilization and generation of biogas, and has recently emerged as a potentially important process for the production of high value volatile fatty acids (VFAs) and alcohols. Here, three reactors were seeded with inoculum from a stably performing methanogenic digester, and selective operating conditions (37°C and 55°C; 12 day and 4 day solids retention time) were applied to restrict methanogenesis while maintaining hydrolysis and fermentation. Replicated experiments performed at each set of operating conditions led to reproducible VFA production profiles which could be correlated with specific changes in microbial community composition. The mesophilic reactor at short solids retention time showed accumulation of propionate and acetate (42 ± 2% and 15 ± 6% of CODhydrolyzed, respectively), and dominance of Fibrobacter and Bacteroidales. Acetate accumulation (>50% of CODhydrolyzed) was also observed in the thermophilic reactors, which were dominated by Clostridium. Under all tested conditions, there was a shift from acetoclastic to hydrogenotrophic methanogenesis, and a reduction in methane production by >50% of CODhydrolyzed. Our results demonstrate that shortening the SRT and increasing the temperature are effective strategies for driving microbial communities towards controlled production of high levels of specific volatile fatty acids. PMID:25683239

  3. Temperature and solids retention time control microbial population dynamics and volatile fatty acid production in replicated anaerobic digesters

    NASA Astrophysics Data System (ADS)

    Vanwonterghem, Inka; Jensen, Paul D.; Rabaey, Korneel; Tyson, Gene W.

    2015-02-01

    Anaerobic digestion is a widely used technology for waste stabilization and generation of biogas, and has recently emerged as a potentially important process for the production of high value volatile fatty acids (VFAs) and alcohols. Here, three reactors were seeded with inoculum from a stably performing methanogenic digester, and selective operating conditions (37°C and 55°C 12 day and 4 day solids retention time) were applied to restrict methanogenesis while maintaining hydrolysis and fermentation. Replicated experiments performed at each set of operating conditions led to reproducible VFA production profiles which could be correlated with specific changes in microbial community composition. The mesophilic reactor at short solids retention time showed accumulation of propionate and acetate (42 +/- 2% and 15 +/- 6% of CODhydrolyzed, respectively), and dominance of Fibrobacter and Bacteroidales. Acetate accumulation (>50% of CODhydrolyzed) was also observed in the thermophilic reactors, which were dominated by Clostridium. Under all tested conditions, there was a shift from acetoclastic to hydrogenotrophic methanogenesis, and a reduction in methane production by >50% of CODhydrolyzed. Our results demonstrate that shortening the SRT and increasing the temperature are effective strategies for driving microbial communities towards controlled production of high levels of specific volatile fatty acids.

  4. The effect of volatile fatty acids (VFAs) on nutrient removal in SBR with biomass adapted to dairy wastewater.

    PubMed

    Janczukowicz, Wojciech; Rodziewicz, Joanna; Czaplicka, Kamila; Kłodowska, Izabella; Mielcarek, Artur

    2013-01-01

    This study aims to determine the effect of volatile fatty acids on nitrates and orthophosphate removal in a sequencing batch reactor (SBR) with activated sludge biomass adapted to process dairy wastewater. The research also determine whether it is the type of fatty acid applied that is responsible for the effectiveness of denitrification and dephosphatation at varying nitrate:orthophosphate ratios, or whether these processes are additionally affected by the presence of microorganisms that have adapted to the specific carbon composition of the wastewater being treated. At the beginning of an operating cycle SBRs were dosed with VFAs to provide a source of carbon. A comparative analysis was performed of nitrate and orthophosphate removal at initial nitrate concentrations of 1.22, 7.3 and 15.2 mgN(NO3)L⁻¹. Doses of fatty acids were approximately 10.5 mg⁻¹COD·mgP(PO4). They consisted of acetic, propionic, butyric, isobutyric, valeric, isovaleric and caproic acids. Increases of nitrate concentration from 1.22 to 15.2 mg N(NO3)L⁻¹ were observed to reduce the quantity of removed orthophosphate depending on the fatty acid applied, from 7.2-9.2 mgP(PO4)L to 4.5 - 6.7 mgP(PO4)L. Every increase in the removed nitrates by 5.0 mgN(NO3)L⁻¹ was accompanied by a decrease in the removed orthophosphate of around 1 mgP(PO4)L⁻¹. The reactor containing acetic acid was found to remove the highest amount of orthophosphate irrespective of the nitrates concentration. Acids present in significant amount in dairy wastewaters (i.e. acetic, propionic and butyric) were more effective source of carbon in the denitrification process compared to low concentration acids. PMID:23445424

  5. Parallel analysis of volatile fatty acids, indole, skatole, phenol, and trimethylamine from waste-related source environments.

    PubMed

    Rahman, Md Mahmudur; Kim, Ki-Hyun

    2013-11-01

    An experimental technique based on sorbent tube-thermal desorption-gas chromatography (ST-TD-GC) was investigated for the simultaneous determination of a cluster of eight volatile odorants (propionic acid, n-butyric acid, i-valeric acid, n-valeric acid, trimethylamine, phenol, indole, and skatole) and a reference compound (benzene). Calibration was made by direct injection of a liquid working standard (L-WS) into a quartz tube packed with three bed sorbent (Tenax TA, Carbopack B, and Carbopack X). To assess the relative performance between different detector systems, a comparative analysis was made using both mass spectrometry (MS) and a flame ionization detector (FID) with the aid of a TD system. In the TD-GC-MS analysis, calibration results were evaluated in two different modes, namely total ion chromatogram (TIC) and extracted ion chromatogram (EIC). In both FID and MS, the elution order of investigated odorants complied with the retention time index (RTI) values for the polar column with a coefficient of determination (R(2)) at or above 0.99. As a means to validate our detection approach, environmental samples from a bathroom and manhole (vacuum samples) as well as cat stool and wastewater (headspace samples) were also collected. The ST-TD method tested for the concurrent analysis of diverse odorants allowed us to measure a list of offensive odorants from those samples. PMID:24070624

  6. Control of amphibious weed ipomoea (Ipomoea carnea) by utilizing it for the extraction of volatile fatty acids as energy precursors.

    PubMed

    Rafiq Kumar, M; Tauseef, S M; Abbasi, Tasneem; Abbasi, S A

    2015-01-01

    Volatile fatty acids (VFAs), comprising mainly of acetic acid and lesser quantities of propionic and butyric acids, are generated when zoomass or phytomass is acted upon by acidogenic and acetogenic microorganisms. VFAs can be utilized by methanogens under anaerobic conditions to generate flammable methane-carbon dioxide mixtures known as 'biogas'. Acting on the premise that this manner of VFA utilization for generating relatively clean energy can be easily accomplished in a controlled fashion in conventional biogas plants as well as higher-rate anaerobic digesters, we have carried out studies aimed to generate VFAs from the pernicious weed ipomoea (Ipomoea carnea). The VFA extraction was accomplished by a simple yet effective technology, appropriate for use even by laypersons. For this acid-phase reactors were set, to which measured quantities of ipomoea leaves were charged along with water inoculated with cow dung. The reactors were stirred intermittently. It was found that VFA production started within hours of the mixing of the reactants and peaked by the 10(th) or 11(th) day in all the reactors, effecting a conversion of over 10% of the biomass into VFAs. The reactor performance had good reproducibility and the process appeared easily controllable, frugal and robust. PMID:25685545

  7. Control of amphibious weed ipomoea (Ipomoea carnea) by utilizing it for the extraction of volatile fatty acids as energy precursors

    PubMed Central

    Rafiq Kumar, M.; Tauseef, S.M.; Abbasi, Tasneem; Abbasi, S.A.

    2014-01-01

    Volatile fatty acids (VFAs), comprising mainly of acetic acid and lesser quantities of propionic and butyric acids, are generated when zoomass or phytomass is acted upon by acidogenic and acetogenic microorganisms. VFAs can be utilized by methanogens under anaerobic conditions to generate flammable methane–carbon dioxide mixtures known as ‘biogas’. Acting on the premise that this manner of VFA utilization for generating relatively clean energy can be easily accomplished in a controlled fashion in conventional biogas plants as well as higher-rate anaerobic digesters, we have carried out studies aimed to generate VFAs from the pernicious weed ipomoea (Ipomoea carnea). The VFA extraction was accomplished by a simple yet effective technology, appropriate for use even by laypersons. For this acid-phase reactors were set, to which measured quantities of ipomoea leaves were charged along with water inoculated with cow dung. The reactors were stirred intermittently. It was found that VFA production started within hours of the mixing of the reactants and peaked by the 10th or 11th day in all the reactors, effecting a conversion of over 10% of the biomass into VFAs. The reactor performance had good reproducibility and the process appeared easily controllable, frugal and robust. PMID:25685545

  8. Influence of temperature on volatile fatty acid production and microbial community structure during anaerobic fermentation of microalgae.

    PubMed

    Cho, Hyun Uk; Kim, Young Mo; Choi, Yun-Nam; Kim, Hye Gyeong; Park, Jong Moon

    2015-09-01

    The objectives of this study were to investigate the effect of operating temperature on volatile fatty acids (VFAs) production from microalgal biomass, and to clarify the relationships between VFAs accumulation at different temperatures and the corresponding bacterial communities. The VFA yields were 0.10±0.017, 0.12±0.008, and 0.34±0.009 g/g VS at 35, 45, and 55 °C, respectively. The proportion of acetic acid decreased from 85.6% to 65.8% as operating temperature increased, whereas that of propionic acid increased from near 0% to 15.5% and that of iso-valeric acid remained relatively stable (10.2-11.2%). Bacterial communities at different operating temperatures consisted mostly of the phyla Proteobacteria, Bacteroidetes, and Firmicutes, which can degrade organic compounds effectively. Bacillus sp. was more predominant at 55 °C than at mesophilic temperatures, suggesting that this microorganism contributed significantly to the higher hydrolysis rate and VFA yield at this operating temperature. PMID:25791331

  9. Volatile organic acid adsorption and cation dissociation by porphyritic andesite for enhancing hydrolysis and acidogenesis of solid food wastes.

    PubMed

    Cheng, Fan; Li, Ming; Li, Dawei; Chen, Ling; Jiang, Weizhong; Kitamura, Yutaka; Li, Baoming

    2010-07-01

    Volatile organic acid adsorption, cation dissociation by porphyritic andesite, and their effects on the hydrolysis and acidogenesis of solid food wastes were evaluated through batch experiments. The acetic acid adsorption experiments show that pH was mainly regulated by H(+) adsorption. The mono-layer and multi-layer adsorption were found under the low (8.3-83.2 mmol/L) and high (133.22-532.89 mmol/L) initial acetic acid concentration, respectively. The dissociated cations concentration in acidic solution showed the predominance of Ca(2+). Porphyritic andesite addition elevated the pH levels and accelerated hydrolysis and acidogenesis in the batch fermentation experiment. Leachate of porphyritic andesite addition achieved the highest hydrolysis constant of 22.1 x 10(-3)kgm(-2)d(-1) and VS degradation rates of 3.9 g L(-1)d(-1). The highest activity of microorganisms represented by specific growth rate of ATP, 0.16d(-1), and specific consumption rate of Ca(2+), 0.18d(-1), was obtained by adding leachate of porphyritic andesite. PMID:20156676

  10. Similar PAH Fate in Anaerobic Digesters Inoculated with Three Microbial Communities Accumulating Either Volatile Fatty Acids or Methane

    PubMed Central

    Braun, Florence; Hamelin, Jérôme; Bonnafous, Anaïs; Delgenès, Nadine; Steyer, Jean-Philippe; Patureau, Dominique

    2015-01-01

    Urban sludge produced on wastewater treatment plants are often contaminated by organic pollutants such as polycyclic aromatic hydrocarbons (PAH). Their removal under methanogenic conditions was already reported, but the factors influencing this removal remain unclear. Here, we determined the influence of microbial communities on PAH removal under controlled physico-chemical conditions. Twelve mesophilic anaerobic digesters were inoculated with three microbial communities extracted from ecosystems with contrasting pollution histories: a PAH contaminated soil, a PCB contaminated sediment and a low contaminated anaerobic sludge. These anaerobic digesters were operated during 100 days in continuous mode. A sterilised activated sludge, spiked with 13 PAH at concentrations usually encountered in full-scale wastewater treatment plants, was used as substrate. The dry matter and volatile solid degradation, the biogas production rate and composition, the volatile fatty acids (VFA) production and the PAH removals were monitored. Bacterial and archaeal communities were compared in abundance (qPCR), in community structure (SSCP fingerprinting) and in dominant microbial species (454-pyrosequencing). The bioreactors inoculated with the community extracted from low contaminated anaerobic sludge showed the greater methane production. The PAH removals ranged from 10 % to 30 %, respectively, for high and low molecular weight PAH, whatever the inoculums tested, and were highly correlated with the dry matter and volatile solid removals. The microbial community structure and diversity differed with the inoculum source; this difference was maintained after the 100 days of digestion. However, the PAH removal was not correlated to these diverse structures and diversities. We hence obtained three functional stable consortia with two contrasted metabolic activities, and three different pictures of microbial diversity, but similar PAH and matter removals. These results confirm that PAH

  11. Influence of the backbone structure on the release of bioactive volatiles from maleic acid-based polymer conjugates.

    PubMed

    Berthier, Damien L; Paret, Nicolas; Trachsel, Alain; Herrmann, Andreas

    2010-11-17

    Poly(maleic acid monoester)-based β-mercapto ketones were synthesized and investigated as potential delivery systems for the controlled release of bioactive, volatile, α,β-unsaturated enones (such as damascones and damascenones) by retro 1,4-addition. The bioconjugates were prepared in a one-pot synthesis using 2-mercaptoethanol as a linker. The thiol group of 2-mercaptoethanol adds to the double bond of the enone to form a β-mercapto ketone, which was then grafted via nucleophilic ring-opening of the remaining alcohol function onto a series of alternating copolymers of maleic anhydride and 1-octadecene, ethylene, isobutylene, and methyl vinyl ether. The influence of copolymer backbones on the release of δ-damascone was investigated in buffered aqueous solution as a function of pH and time. In the presence of a cationic surfactant, the polymer conjugates were transferred from an aqueous medium to a cotton surface. The deposition and the release of δ-damascone from the cotton surface as a function of the polymer backbone structure were measured by fluorescence spectroscopy and dynamic headspace analysis, respectively. All polymer conjugates were found to deliver higher amounts of the volatile into the headspace than the reference consisting of unmodified δ-damascone. Polymers with a hydrophobic backbone were generally efficiently deposited on the cotton surface, but released δ-damascone only moderately in solution. Conjugates with a more hydrophilic backbone release the active compound more efficiently in water, but are deposited to a lower extent onto the target surface. A good balance of the hydrophobicity and hydrophilicity of the polymer backbone is the key factor to maximize the deposition of the conjugates on the target surface and to optimize the release of the bioactive volatiles. PMID:20936844

  12. Similar PAH fate in anaerobic digesters inoculated with three microbial communities accumulating either volatile fatty acids or methane.

    PubMed

    Braun, Florence; Hamelin, Jérôme; Bonnafous, Anaïs; Delgenès, Nadine; Steyer, Jean-Philippe; Patureau, Dominique

    2015-01-01

    Urban sludge produced on wastewater treatment plants are often contaminated by organic pollutants such as polycyclic aromatic hydrocarbons (PAH). Their removal under methanogenic conditions was already reported, but the factors influencing this removal remain unclear. Here, we determined the influence of microbial communities on PAH removal under controlled physico-chemical conditions. Twelve mesophilic anaerobic digesters were inoculated with three microbial communities extracted from ecosystems with contrasting pollution histories: a PAH contaminated soil, a PCB contaminated sediment and a low contaminated anaerobic sludge. These anaerobic digesters were operated during 100 days in continuous mode. A sterilised activated sludge, spiked with 13 PAH at concentrations usually encountered in full-scale wastewater treatment plants, was used as substrate. The dry matter and volatile solid degradation, the biogas production rate and composition, the volatile fatty acids (VFA) production and the PAH removals were monitored. Bacterial and archaeal communities were compared in abundance (qPCR), in community structure (SSCP fingerprinting) and in dominant microbial species (454-pyrosequencing). The bioreactors inoculated with the community extracted from low contaminated anaerobic sludge showed the greater methane production. The PAH removals ranged from 10% to 30%, respectively, for high and low molecular weight PAH, whatever the inoculums tested, and were highly correlated with the dry matter and volatile solid removals. The microbial community structure and diversity differed with the inoculum source; this difference was maintained after the 100 days of digestion. However, the PAH removal was not correlated to these diverse structures and diversities. We hence obtained three functional stable consortia with two contrasted metabolic activities, and three different pictures of microbial diversity, but similar PAH and matter removals. These results confirm that PAH removal

  13. Production of glycolic acid by chemolithotrophic iron- and sulfur-oxidizing bacteria and its role in delineating and sustaining acidophilic sulfide mineral-oxidizing consortia.

    PubMed

    Nancucheo, Ivan; Johnson, D Barrie

    2010-01-01

    Glycolic acid was detected as an exudate in actively growing cultures of three chemolithotrophic acidophiles that are important in biomining operations, Leptospirillum ferriphilum, Acidithiobacillus (At.) ferrooxidans, and At. caldus. Although similar concentrations of glycolic acid were found in all cases, the concentrations corresponded to ca. 24% of the total dissolved organic carbon (DOC) in cultures of L. ferriphilum but only ca. 5% of the total DOC in cultures of the two Acidithiobacillus spp. Rapid acidification (to pH 1.0) of the culture medium of At. caldus resulted in a large increase in the level of DOC, although the concentration of glycolic acid did not change in proportion. The archaeon Ferroplasma acidiphilum grew in the cell-free spent medium of At. caldus; glycolic acid was not metabolized, although other unidentified compounds in the DOC pool were metabolized. Glycolic acid exhibited levels of toxicity with 21 strains of acidophiles screened similar to those of acetic acid. The most sensitive species were chemolithotrophs (L. ferriphilum and At. ferrivorans), while the most tolerant species were chemoorganotrophs (Acidocella, Acidobacterium, and Ferroplasma species), and the ability to metabolize glycolic acid appeared to be restricted (among acidophiles) to Firmicutes (chiefly Sulfobacillus spp.). Results of this study help explain why Sulfobacillus spp. rather than other acidophiles are the main organic carbon-degrading bacteria in continuously fed stirred tanks used to bioprocess sulfide mineral concentrates and also why temporary cessation of pH control in these systems, resulting in rapid acidification, often results in a plume of the archaeon Ferroplasma. PMID:19933342

  14. Ruthenium volatility from the vitrification of melter feeds prepared using the Nitric Acid Flowsheet

    SciTech Connect

    Hutson, N.D.

    1992-10-22

    The present DWPF flowsheet calls for the chemical treatment of waste sludge with 90 wt% formic acid prior to the addition of the Precipitate Hydrolysis Aqueous (PHA) product. An alternative processing methodology, denoted the ``Nitric Acid Flowsheet``, has been proposed. In the application of this flowsheet, nitric acid would be used to neutralize sludge base components (hydroxides and carbonates) prior to the addition of late wash PHA. The late wash PHA will contain sufficient quantities of formic acid to adequately complete necessary reduction-oxidation (REDOX) reactions.

  15. Ruthenium volatility from the vitrification of melter feeds prepared using the Nitric Acid Flowsheet

    SciTech Connect

    Hutson, N.D.

    1992-10-22

    The present DWPF flowsheet calls for the chemical treatment of waste sludge with 90 wt% formic acid prior to the addition of the Precipitate Hydrolysis Aqueous (PHA) product. An alternative processing methodology, denoted the Nitric Acid Flowsheet'', has been proposed. In the application of this flowsheet, nitric acid would be used to neutralize sludge base components (hydroxides and carbonates) prior to the addition of late wash PHA. The late wash PHA will contain sufficient quantities of formic acid to adequately complete necessary reduction-oxidation (REDOX) reactions.

  16. Acidogenic fermentation of Scenedesmus sp.-AMDD: Comparison of volatile fatty acids yields between mesophilic and thermophilic conditions.

    PubMed

    Gruhn, Marvin; Frigon, Jean-Claude; Guiot, Serge R

    2016-01-01

    This study compared the acidogenic fermentation of Scenedesmus sp.-AMDD at laboratory-scale, under mesophilic (35°C) and thermophilic conditions (55°C). Preliminary batch tests were performed to evaluate best conditions for volatile fatty acid (VFA) production from microalgal biomass, with respect to the inoculum, pH and nutrients. The use of bovine manure as inoculum, the operating pH of 4.5 and the addition of a nutrient mix, resulted in a high VFA production of up to 222mgg(-1) total volatile solid (TVS), with a butyrate share of 27%. Both digesters displayed similar hydrolytic activity with 0.38±0.02 and 0.42±0.03 g soluble chemical oxygen demand (COD)g(-1) TVS for the digesters operated at 35 and 55°C, respectively. Mesophilic conditions were more favorable for VFA production, which reached 171±5, compared to 88±12 mg soluble CODg(-1) TVS added under thermophilic conditions (94% more). It was shown that in both digesters, butyrate was the predominant VFA. PMID:26551650

  17. Effect of initial total solids concentration on volatile fatty acid production from food waste during anaerobic acidification.

    PubMed

    Wang, Quan; Jiang, Jianguo; Zhang, Yujing; Li, Kaimin

    2015-01-01

    The effect of initial total solids (TS) concentration on volatile fatty acid (VFAs) production from food waste under mesophilic conditions (35 °C) was determined. VFAs concentration and composition, biogas production, soluble chemical oxygen demand concentration, TS and volatile solids (VS) reduction, and ammonia nitrogen [Formula: see text] release were investigated. The VFAs concentrations were 26.10, 39.68, 59.58, and 62.64 g COD/L at TS contents of 40, 70, 100, and 130 g/L, respectively. While the VFAs' yields ranged from 0.467 to 0.799 g COD/g VSfed, decreased as initial TS increased. The percentage of propionate was not affected by TS concentration, accounting for 30.19-34.86% of the total VFAs, while a higher percentage of butyrate and lower percentage of acetate was achieved at a higher TS concentration. Biogas included mainly hydrogen and carbon dioxide and the maximum hydrogen yield of 148.9 ml/g VSfed was obtained at 130 g TS/L. [Formula: see text] concentration, TS and VS reductions increased as initial TS increased. Considering the above variables, we conclude that initial TS of 100 g/L shall be the most appropriate to VFAs production. PMID:25666310

  18. Hydrogen Sulfide Oxidation by Myoglobin.

    PubMed

    Bostelaar, Trever; Vitvitsky, Victor; Kumutima, Jacques; Lewis, Brianne E; Yadav, Pramod K; Brunold, Thomas C; Filipovic, Milos; Lehnert, Nicolai; Stemmler, Timothy L; Banerjee, Ruma

    2016-07-13

    Enzymes in the sulfur network generate the signaling molecule, hydrogen sulfide (H2S), from the amino acids cysteine and homocysteine. Since it is toxic at elevated concentrations, cells are equipped to clear H2S. A canonical sulfide oxidation pathway operates in mitochondria, converting H2S to thiosulfate and sulfate. We have recently discovered the ability of ferric hemoglobin to oxidize sulfide to thiosulfate and iron-bound hydropolysulfides. In this study, we report that myoglobin exhibits a similar capacity for sulfide oxidation. We have trapped and characterized iron-bound sulfur intermediates using cryo-mass spectrometry and X-ray absorption spectroscopy. Further support for the postulated intermediates in the chemically challenging conversion of H2S to thiosulfate and iron-bound catenated sulfur products is provided by EPR and resonance Raman spectroscopy in addition to density functional theory computational results. We speculate that the unusual sensitivity of skeletal muscle cytochrome c oxidase to sulfide poisoning in ethylmalonic encephalopathy, resulting from the deficiency in a mitochondrial sulfide oxidation enzyme, might be due to the concentration of H2S by myoglobin in this tissue. PMID:27310035

  19. Milk volatile organic compounds and fatty acid profile in cows fed timothy as hay, pasture, or silage.

    PubMed

    Villeneuve, M-P; Lebeuf, Y; Gervais, R; Tremblay, G F; Vuillemard, J C; Fortin, J; Chouinard, P Y

    2013-01-01

    Nutrient composition and organoleptic properties of milk can be influenced by cow diets. The objective of this study was to evaluate the forage type effects on volatile organic compounds, fatty acid (FA) profile, and organoleptic properties of milk. Timothy grass was fed as hay, pasture, or silage during a period of 27 d to a group of 21 cows in a complete block design based on days in milk. Each cow also received 7.2 kg/d of a concentrate mix to meet their nutrient requirements. Forage dry matter intake averaged 13.9 kg/d and was not different among treatments. Milk yield was higher for cows fed pasture, intermediate for cows fed silage, and lowest for cows fed hay. However, milk fat content was higher for cows fed hay and silage, compared with cows fed pasture. As a result, fat-corrected milk and fat yield were not different among treatments. Increasing the supply of dietary cis-9,cis-12 18:2 (linoleic acid) and cis-9,cis-12,cis-15 18:3 (α-linolenic acid) when feeding pasture enhanced the concentration of these 2 essential FA in milk fat compared with feeding hay or silage. Moreover, the ratio of 16:0 (palmitic acid) to cis-9 18:1 (oleic acid), which is closely related to the melting properties of milk fat, was lower in milk from cows on pasture than in milk from cows fed hay or silage. Cows fed hay produced milk with higher levels of several free FA and γ-lactones, but less pentanal and 1-pentanol. More dimethyl sulfone and toluene were found in milk of cows on pasture. Cows fed silage produced milk with higher levels of acetone, 2-butanone, and α-pinene. Results from a sensory evaluation showed that panelists could not detect a difference in flavor between milk from cows fed hay compared with silage. However, a significant number of assessors perceived a difference between milk from cows fed hay compared with milk from cows fed pasture. In a sensory ranking test, the percentage of assessors ranking for the intensity of total (raw milk, fresh milk, and farm

  20. Biological upgrading of volatile fatty acids, key intermediates for the valorization of biowaste through dark anaerobic fermentation.

    PubMed

    Singhania, Reeta Rani; Patel, Anil Kumar; Christophe, Gwendoline; Fontanille, Pierre; Larroche, Christian

    2013-10-01

    VFAs can be obtained from lignocellulosic agro-industrial wastes, sludge, and various biodegradable organic wastes as key intermediates through dark fermentation processes and synthesized through chemical route also. They are building blocks of several organic compounds viz. alcohol, aldehyde, ketones, esters and olefins. These can serve as alternate carbon source for microbial biolipid, biohydrogen, microbial fuel cells productions, methanisation, and for denitrification. Organic wastes are the substrate for VFA platform that is of zero or even negative cost, giving VFA as intermediate product but their separation from the fermentation broth is still a challenge; however, several separation technologies have been developed, membrane separation being the most suitable one. These aspects will be reviewed and results obtained during anaerobic treatment of slaughterhouse wastes with further utilisation of volatile fatty acids for yeast cultivation have been discussed. PMID:23339903

  1. Removal of volatile fatty acids and ammonia recovery from unstable anaerobic digesters with a microbial electrolysis cell.

    PubMed

    Cerrillo, Míriam; Viñas, Marc; Bonmatí, August

    2016-11-01

    Continuous assays with a microbial electrolysis cell (MEC) fed with digested pig slurry were performed to evaluate its stability and robustness to malfunction periods of an anaerobic digestion (AD) reactor and its feasibility as a strategy to recover ammonia. When performing punctual pulses of volatile fatty acids (VFA) in the anode compartment of the MEC, simulating a malfunction of the AD process, an increase in the current density was produced (up to 14 times, reaching values of 3500mAm(-2)) as a result of the added chemical oxygen demand (COD), especially when acetate was used. Furthermore, ammonium diffusion from the anode to the cathode compartment was enhanced and the removal efficiency achieved up to 60% during daily basis VFA pulses. An AD-MEC combined system has proven to be a robust and stable configuration to obtain a high quality effluent, with a lower organic and ammonium content. PMID:27501031

  2. Growth of Chlorella sorokiniana on a mixture of volatile fatty acids: The effects of light and temperature.

    PubMed

    Turon, V; Trably, E; Fouilland, E; Steyer, J-P

    2015-12-01

    This study investigated the influence of light and temperature on Chlorella sorokiniana grown on a mixture of acetate and butyrate, two of the volatile fatty acids produced by dark fermentation. Exposure to light caused autotrophic biomass production (56% of the final biomass) and reduced the time to reach butyrate exhaustion to 7 days at 25°C from 10 days in the dark. For growth on acetate at the optimum temperature (35°C), the presence of butyrate reduced the growth rate (by 46%) and the carbon yield (by 36%). For successful microalgae growth on dark fermentation effluent, butyrate inhibition may be reduced by setting the temperature to 30°C and providing light. PMID:26461792

  3. Volatile fatty acids platform from thermally hydrolysed secondary sewage sludge enhanced through recovered micronutrients from digested sludge.

    PubMed

    Kumi, Philemon J; Henley, Adam; Shana, Achame; Wilson, Victoria; Esteves, Sandra R

    2016-09-01

    The extracellular polymeric substances and microbial cytoplasmic contents seem to hold inorganic ions and organic products, such as proteins and carbohydrates that are of critical importance for the metabolism of hydrolytic and acidogenic anaerobic microorganisms. The addition of soluble microbially recovered nutrients from thermally treated digestate sludge, for the fermentation of thermally hydrolysed waste activated sludge, resulted in higher volatile fatty acids yields (VFAs). The yield of VFAs obtained from the recovered microbial nutrients was 27% higher than the no micronutrients control, and comparable to the yield obtained using a micronutrients commercial recipe. In addition, the use of a low pH resulting from a high sucrose dose to select spore forming acidogenic bacteria was effective for VFA production, and yielded 20% higher VFAs than without the pH shock and this associated with the addition of recovered microbial nutrients would overcome the need to thermally pre-treat the inoculum. PMID:27206055

  4. Development of a submerged anaerobic membrane bioreactor for concurrent extraction of volatile fatty acids and biohydrogen production.

    PubMed

    Trad, Zaineb; Akimbomi, Julius; Vial, Christophe; Larroche, Christian; Taherzadeh, Mohammad J; Fontaine, Jean-Pierre

    2015-11-01

    The aim of this work was to study an externally-submerged membrane bioreactor for the cyclic extraction of volatile fatty acids (VFAs) during anaerobic fermentation, combining the advantages of submerged and external technologies for enhancing biohydrogen (BioH2) production from agrowaste. Mixing and transmembrane pressure (TMP) across a hollow fiber membrane placed in a recirculation loop coupled to a stirred tank were investigated, so that the loop did not significantly modify the hydrodynamic properties in the tank. The fouling mechanism, due to cake layer formation, was reversible. A cleaning procedure based on gas scouring and backwashing with the substrate was defined. Low TMP, 10(4)Pa, was required to achieve a 3Lh(-1)m(-2) critical flux. During fermentation, BioH2 production was shown to restart after removing VFAs with the permeate, so as to enhance simultaneously BioH2 production and the recovery of VFAs as platform molecules. PMID:26253913

  5. Authentication of Italian PDO lard using NIR spectroscopy, volatile profile and fatty acid composition combined with chemometrics.

    PubMed

    Chiesa, L; Panseri, S; Bonacci, S; Procopio, A; Zecconi, A; Arioli, F; Cuevas, F J; Moreno-Rojas, J M

    2016-12-01

    This study analysed the usefulness of near infrared spectroscopy (NIRS), combined with volatile compound (VOC) and fatty acid (FA) analyses, for the authentication of the unique Italian Valle d'Aosta Arnad Protected Designation of Origin (PDO) lard. Ensuring the authenticity of high value meat products remains an emerging topic within the food sector. This study validated a FA, VOC and NIRS model for use in the authentication of Arnad PDO lard. The model showed a high potential rate to recognize patterns in lard samples. In particular the sensitivity and specificity calibration values were both 100%, and cross-validation models were performed using FAs and VOCs separately. The NIRS model obtained sensitivity and specificity values of 98.2% in the calibration data set, and 94.4% in the cross-validation step. This analytical approach may represent an effective tool to prevent food fraud, which is crucial for meat derived products with a high commercial value. PMID:27374536

  6. Prevention of volatile fatty acids production and limitation of odours from winery wastewaters by denitrification.

    PubMed

    Bories, André; Guillot, Jean-Michel; Sire, Yannick; Couderc, Marie; Lemaire, Sophie-Andréa; Kreim, Virginie; Roux, Jean-Claude

    2007-07-01

    The effect of the addition of nitrate to winery wastewaters to control the formation of VFA in order to prevent odours during storage and treatment was studied in batch bioreactors at different NO(3)/chemical oxygen demand (COD) ratios and at full scale in natural evaporation ponds (2 x 7000 m(2)) by measuring olfactory intensity. In the absence of nitrate, butyric acid (2304 mgL(-1)), acetic acid (1633 mgL(-1)), propionic acid (1558 mgL(-1)), caproic acid (499 mgL(-1)) and valeric acid (298 mgL(-1)) were produced from reconstituted winery wastewater. For a ratio of NO(3)/COD=0.4 gg(-1), caproic and valeric acids were not formed. The production of butyric and propionic acids was reduced by 93.3% and 72.5%, respectively, at a ratio of NO(3)/COD=0.8, and by 97.4% and 100% at a ratio of NO(3)/COD=1.2 gg(-1). Nitrate delayed and decreased butyric acid formation in relation to the oxidoreduction potential. Studies in ponds showed that the addition of concentrated calcium nitrate (NITCAL) to winery wastewaters (3526 m(3)) in a ratio of NO(3)/COD=0.8 inhibited VFA production, with COD elimination (94%) and total nitrate degradation, and no final nitrite accumulation. On the contrary, in ponds not treated with nitrate, malodorous VFA (from propionic to heptanoïc acids) represented up to 60% of the COD. Olfactory intensity measurements in relation to the butanol scale of VFA solutions and the ponds revealed the pervasive role of VFA in the odour of the untreated pond as well as the clear decrease in the intensity and not unpleasant odour of the winery wastewater pond enriched in nitrates. The results obtained at full scale underscored the feasibility and safety of the calcium nitrate treatment as opposed to concentrated nitric acid. PMID:17467770

  7. Synergistic effect of antioxidant system and osmolyte in hydrogen sulfide and salicylic acid crosstalk-induced heat tolerance in maize (Zea mays L.) seedlings

    PubMed Central

    Li, Zhong-Guang

    2015-01-01

    Salicylic acid (SA), is a plant hormone with multifunction that is involved in plant growth, development and the acquisition of stress tolerance. Hydrogen sulfide (H2S) is emerging similar functions, but crosstalk between SA and H2S in the acquisition of heat tolerance is not clear. Our recent study firstly reported that SA treatment enhanced the activity of L-cysteine desulfhydrase (L-DES), a key enzyme in H2S biosynthesis, followed by induced endogenous H2S accumulation, which in turn improved the heat tolerance of maize seedlings.1 In addition, NaHS, a H2S donor, enhanced SA-induced heat tolerance, while its biosynthesis inhibitor DL-propargylglycine (PAG) and scavenger hydroxylamine (HT) weakened SA-induced heat tolerance. Also, NaHS had no significant effect on SA accumulation and its biosynthesis enzymes phenylalanine ammonia lyase (PAL) and benzoic-acid-2-hydroxylase (BA2H) activities, as well as significant difference was not observed in NaHS-induced heat tolerance of maize seedlings by SA biosynthesis inhibitors paclobutrazol (PAC) and 2-aminoindan-2-phosph- onic acid (AIP) treatment.1 Further study displayed that SA induced osmolytes (proline, betaine and trehalose) accumulation and enhancement in activity of antioxidant system in maize seedlings. These results showed that antioxidant system and osmolyte play a synergistic role in SA and H2S crosstalk-induced heat tolerance of maize seedlings. PMID:26337076

  8. Reduction of volatile fatty acids and odor offensiveness by anaerobic digestion and solid separation of dairy manure during manure storage.

    PubMed

    Page, Laura H; Ni, Ji-Qin; Zhang, Hao; Heber, Albert J; Mosier, Nathan S; Liu, Xingya; Joo, Hung-Soo; Ndegwa, Pius M; Harrison, Joseph H

    2015-04-01

    Volatile fatty acids (VFA) play an important role in the biodegradation of organic wastes and production of bioenergy under anaerobic digestion, and are related to malodors. However, little is known about the dynamics of VFA during dairy manure storage. This study evaluated the characteristics of VFA in dairy manure before and after anaerobic co-digestion in a laboratory experiment using eight lab-scale reactors. The reactors were loaded with four different types of dairy manure: (1) liquid dairy manure from a freestall barn, (2) mixture of dairy manure and co-digestion food processing wastes at the inlet of an anaerobic digester, (3) effluent from the digester outlet, and (4) the liquid fraction of effluent from a solid separator. Four VFA (acetic, propionic, butyric, and 2-methylbutyric acids) were identified and quantified in weekly manure samples from all reactors. Results showed that the dominant VFA was acetic acid in all four manure sources. The off-farm co-digestion wastes significantly increased the total VFA concentrations and the proportions of individual VFA in the influent. The dairy manure under storage demonstrated high temporal and spatial variations in pH and VFA concentrations. Anaerobic digestion reduced the total VFA by 86%-96%; but solid-liquid separation did not demonstrate a significant reduction in total VFA in this study. Using VFA as an indicator, anaerobic digestion exhibited an effective reduction of dairy manure odor offensiveness. PMID:25617873

  9. Quantitation of volatiles and nonvolatile acids in an extract from coffee beverages: correlation with antioxidant activity.

    PubMed

    Fujioka, Kazutoshi; Shibamoto, Takayuki

    2006-08-01

    The antioxidant activities of a commercial brewed coffee were investigated by measuring malonaldehyde (MA) formation from oxidized cod liver oil using a gas chromatographic method (MA-GC assay) and a thiobarbituric acid method (TBA assay). The highest antioxidant activity obtained by the MA-GC assay was from regular whole brewed coffee (97.8%) at a level of 20%, and the highest antioxidant activity obtained by the TBA assay was from decaffeinated whole brewed coffee (96.6%) at a level of 5%. Among 31 chemicals identified in a dichloromethane extract, guaiacol, ethylguaiacol, and vinylguaiacol exhibited antioxidant activities, which were comparable to that of alpha-tocopherol. Among nine chlorogenic acids (three caffeoylquinic acids, three feruloylquinic acids, and three dicaffeoylquinic acids) identified, 5-caffeoylquinic acid contained the greatest amount both in regular (883.5 microg/mL) and in decaffeinated (1032.6 microg/mL) coffees; it exhibited 24.5% activity by the MA-GC assay and 45.3% activity by the TBA assay at a level of 10 microg/mL. Caffeic and ferulic acids showed moderate antioxidant activities in both assays. PMID:16881716

  10. Volatility of Organic Aerosol: Evaporation of Ammonium Sulfate/Succinic Acid Aqueous Solution Droplets

    PubMed Central

    2013-01-01

    Condensation and evaporation modify the properties and effects of atmospheric aerosol particles. We studied the evaporation of aqueous succinic acid and succinic acid/ammonium sulfate droplets to obtain insights on the effect of ammonium sulfate on the gas/particle partitioning of atmospheric organic acids. Droplet evaporation in a laminar flow tube was measured in a Tandem Differential Mobility Analyzer setup. A wide range of droplet compositions was investigated, and for some of the experiments the composition was tracked using an Aerosol Mass Spectrometer. The measured evaporation was compared to model predictions where the ammonium sulfate was assumed not to directly affect succinic acid evaporation. The model captured the evaporation rates for droplets with large organic content but overestimated the droplet size change when the molar concentration of succinic acid was similar to or lower than that of ammonium sulfate, suggesting that ammonium sulfate enhances the partitioning of dicarboxylic acids to aqueous particles more than currently expected from simple mixture thermodynamics. If extrapolated to the real atmosphere, these results imply enhanced partitioning of secondary organic compounds to particulate phase in environments dominated by inorganic aerosol. PMID:24107221

  11. Method for inhibiting oxidation of metal sulfide-containing material

    DOEpatents

    Elsetinow, Alicia; Borda, Michael J.; Schoonen, Martin A.; Strongin, Daniel R.

    2006-12-26

    The present invention provides means for inhibiting the oxidation of a metal sulfide-containing material, such as ore mine waste rock or metal sulfide taiulings, by coating the metal sulfide-containing material with an oxidation-inhibiting two-tail lipid coating (12) thereon, thereby inhibiting oxidation of the metal sulfide-containing material in acid mine drainage conditions. The lipids may be selected from phospholipids, sphingolipids, glycolipids and combinations thereof.

  12. DIFFERENTIAL VOLATILE EMISSIONS AND SALICYLIC ACID LEVELS FROM TOBACCO PLANTS IN RESPONSE TO DIFFERENT STRAINS OF PSEUDOMONAS SYRINGAE

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Pathogen-induced plant responses include changes in both volatile and non-volatile secondary metabolites. To investigate the role of bacterial pathogenesis in plant volatile emissions, tobacco plants, Nicotiana tabacum K326, were inoculated with virulent, avirulent, and mutant strains of Pseudomona...

  13. Discrimination among iron sulfide species formed in microbial cultures.

    PubMed

    Popa, R; Kinkle, B K

    2000-10-01

    A quantitative method for the study of iron sulfides precipitated in liquid cultures of bacteria is described. This method can be used to quantify and discriminate among amorphous iron sulfide (FeS(amorph)), iron monosulfide minerals such as mackinawite or greigite (FeS(min)), and iron disulfide minerals such as pyrite or marcasite (FeS(2min)) formed in liquid cultures. Degradation of iron sulfides is performed using a modified Cr(2+) reduction method with reflux distillation. The basic steps of the method are: first, separation of FeS(amorph); second, elimination of interfering species of S such as colloidal sulfur (S(c) degrees ), thiosulphate (S(2)O(3)(2-)) and polysulfides (S(x)(2-)); third, separation of FeS(min); and fourth, separation of FeS(2min). The final product is H(2)S which is determined after trapping. The efficiency of recovery is 96-99% for FeS(amorph), 76-88% for FeS(min), and >97% for FeS(2min). This method has a high reproducibility if the experimental conditions are rigorously applied and only glass conduits are used. A well ventilated fume hood must be used because of the toxicity and volatility of several reagents and products. The advantage relative to previously described methods are better resolution for iron sulfide species and use of the same bottles for both incubation of cultures and acid degradation. The method can also be used for Fe/S stoichiometry with sub-sampling and Fe analysis. PMID:11018273

  14. Storage of methane as volatile fatty acids for intermittent fuel use

    SciTech Connect

    Nghiem, N.P.; Mehta, K.; Callihan, C.D.

    1983-01-01

    A process for on-site production of methane from sweet potato canning wastes was developed. In this process methane is stored conveniently as a liquid in the form of organic acids which are produced in an acid pond. When methane is needed, the acids are pumped into a methane pond underneath a sludge blanket, where high rates of methane production begin shortly after feeding. A demonstration plant has been designed and is being constructed using the existing pond system and facilities in a sweet potato canning factory in Louisiana. The methane produced is burned on-site to generate process steam for use in the main plant. 14 references, 10 figures, 3 tables.

  15. Evaluation of sulfidic mine tailings solidified/stabilized with cement kiln dust and fly ash to control acid mine drainage

    SciTech Connect

    Nehdi, M.; Tariq, A.

    2008-11-15

    In the present research, industrial byproducts, namely, cement kiln dust (CKD) and Class C fly ash (FAC) have been used as candidate materials along with the partial addition of sulfate-resistant cement (SRC) in the Stabilization/solidification of polymetallic sulfidic mine tailings (MT). The effectiveness of S/S was assessed by comparing laboratory experimental values obtained from unconfined compressive strength, hydraulic conductivity and leaching propensity tests of S/S samples with regulatory standards for safe surface disposal of such wastes. Despite general regulatory compliance of compressive strength and hydraulic conductivity, some solidified/stabilized-cured matrices were found unable to provide the required immobilization of pollutants. Solidified/stabilized and 90-day cured mine tailings specimens made with composite binders containing (10% CKD + 10% FAC), (5% SRC + 15% FAC) and (5% SRC + 5% CKD + 10% FAC) significantly impaired the solubility of all contaminants investigated and proved successful in fixing metals within the matrix, in addition to achieving adequate unconfined compressive strength and hydraulic conductivity values, thus satisfying USEPA regulations. Laboratory investigations revealed that, for polymetallic mining waste, leachate concentrations are the most critical factor in assessing the effectiveness of S/S technology.

  16. Identification of Bioactivity, Volatile and Fatty Acid Profile in Supercritical Fluid Extracts of Mexican arnica.

    PubMed

    García-Pérez, J Saúl; Cuéllar-Bermúdez, Sara P; Arévalo-Gallegos, Alejandra; Rodríguez-Rodríguez, José; Iqbal, Hafiz M N; Parra-Saldivar, Roberto

    2016-01-01

    Supercritical fluid extraction (SFE) is a sustainable technique used for the extraction of lipophilic metabolites such as pigments and fatty acids. Arnica plant is considered a potential candidate material with high antioxidant and antimicrobial activities. Therefore, in this study, a locally available Heterotheca inuloides, also known as Mexican arnica, was analyzed for the extraction of high-value compounds. Based on different pressure (P), temperature (T), and co-solvent (CoS), four treatments (T) were prepared. A maximum 7.13% yield was recovered from T2 (T = 60 °C, P = 10 MPa, CoS = 8 g/min), followed by 6.69% from T4 (T = 60 °C, P = 30 MPa, CoS = 4 g/min). Some bioactive sesquiterpenoids such as 7-hydroxycadalene, caryophyllene and δ-cadinene were identified in the extracts by GC/MS. The fatty acid profile revealed that the main components were palmitic acid (C16:0), followed by linoleic acid (C18:2ω6c), α-linolenic acid (C18:3ω3) and stearic acid (C18:0) differing in percent yield per treatment. Antibacterial activities were determined by the agar diffusion method, indicating that all the treatments exerted strong antibacterial activity against S. aureus, C. albicans, and E. coli strains. The antioxidant capacity of the extracts was also measured by three in vitro assays, DPPH, TEAC and FRAP, using Trolox as a standard. Results showed high antioxidant capacity enabling pharmaceutical applications of Mexican arnica. PMID:27626416

  17. Effects of volatile fatty acids on propionate metabolism and gluconeogenesis in caprine hepatocytes

    SciTech Connect

    Aiello, R.J.; Armentano, L.E.

    1987-12-01

    Isolated caprine hepatocytes were incubated with fatty acids of various chain lengths. Short-chain fatty acids effects on rates of gluconeogenesis and oxidation from (2-/sup 14/C) propionate were determined. Additions of glucose (2.5 mM) had no effect on hepatic (2-/sup 14/C)-propionate metabolism in the presence and absence of amino acids. A complete mixture of amino acids increased label incorporation from (2-/sup 14/C) propionate into (/sup 14/C) glucose by 22%. Butyrate inhibited (2-/sup 14/C) propionate metabolism and increased the apparent Michaelis constant for (2-/sup 14/C) propionate incorporation into (/sup 14/C) glucose from 2.4 +/- 1.5 to 5.6 +/- .9 mM. Butyrate's effects on propionate were similar in the presence and absence of L-carnitine (1 mM). Isobutyrate, 2-methylbutyrate, and valerate (1.25 mM) had no effect on (/sup 14/C) glucose production but decreased /sup 14/CO/sub 2/ production to 57, 61, and 54% of the control (2-/sup 14/C) propionate (1.25 mM). This inhibition on /sup 14/CO/sub 2/ was not competitive. Isovalerate had no effect on either (2-/sup 14/C) propionate incorporation into glucose of CO/sub 2/. An increase in ratio of (/sup 14/C) glucose to /sup 14/CO/sub 2/ from (2-/sup 14/C)-propionate demonstrated that short-chain fatty acids other than butyrate do not inhibit gluconeogenesis from propionate. In addition, fatty acids that generate a net synthesis of intracellular oxaloacetate may partition propionate carbons toward gluconeogenic rather than oxidative pathways in goat hepatocytes.

  18. STUDIES ON THE METABOLIC FUNCTION OF BRANCHED-CHAIN VOLATILE FATTY ACIDS, GROWTH FACTORS FOR RUMINOCOCCI I.

    PubMed Central

    Allison, Milton J.; Bryant, Marvin P.; Doetsch, Raymond N.

    1962-01-01

    Allison, Milton J. (Dairy Cattle Research Branch, U. S. Department of Agriculture, Beltsville, Md.), M. P. Bryant, and R. N. Doetsch. Studies on the metabolic function of branched-chain volatile fatty acids, growth factors for ruminococci. I. Incorporation of isovalerate into leucine. J. Bacteriol. 83:523–532. 1962.—Ruminococcus flavefaciens strain C94, a cellulolytic rumen bacterium, requires either isobutyrate or isovalerate for growth. The organism was grown in the presence of C14-labeled isovalerate, and the metabolic fate of the labeled carbon was studied to obtain information on the functions of this growth factor. Radioactivity from isovalerate-1-C14 and isovalerate-3-C14 was found mainly in the protein and lipid fractions of the cells. The C14 in protein was all in leucine, indicating that a function of isovalerate was to serve as a carbon skeleton for leucine synthesis. As C14 in leucine synthesized from isovalerate-1-C14 was entirely in carbon 2, the intact isovalerate molecule was apparently incorporated into leucine. This is evidence that leucine was synthesized by a mechanism different from that previously demonstrated in other microorganisms. R. flavefaciens has a definite but limited ability to incorporate exogenous amino acids, including leucine. It incorporated 2% of the C14 during growth in uniformly labeled (UL) C14-Chlorella protein hydrolyzate; Escherichia coli incorporated 37% of the label under similar conditions. In another experiment, a limited amount of exogenous leucine-2-C14 was incorporated into protein of R. flavefaciens. The requirement for isovalerate was not replaced by dl-leucine or 2-ketoisocaproate. It is suggested that isovalerate or isobutyrate is required because R. flavefaciens has a limited ability to incorporate exogenous branched-chain amino acids and a limited ability to synthesize the isopropyl group found in these amino acids and in other components of the cell. Images PMID:13860621

  19. Sulfide chemiluminescence detection

    DOEpatents

    Spurlin, Stanford R.; Yeung, Edward S.

    1985-01-01

    A method of chemiluminescently determining a sulfide which is either hydrogen sulfide or methyl mercaptan by reacting the sulfide with chlorine dioxide at low pressure and under conditions which allow a longer reaction time in emission of a single photon for every two sulfide containing species, and thereafter, chemiluminescently detecting and determining the sulfide. The invention also relates not only to the detection method, but the novel chemical reaction and a specifically designed chemiluminescence detection cell for the reaction.

  20. Sulfide chemiluminescence detection

    DOEpatents

    Spurlin, S.R.; Yeung, E.S.

    1985-11-26

    A method is described for chemiluminescently determining a sulfide which is either hydrogen sulfide or methyl mercaptan by reacting the sulfide with chlorine dioxide at low pressure and under conditions which allow a longer reaction time in emission of a single photon for every two sulfide containing species, and thereafter, chemiluminescently detecting and determining the sulfide. The invention also relates not only to the detection method, but the novel chemical reaction and a specifically designed chemiluminescence detection cell for the reaction. 4 figs.

  1. Hydrogen sulfide acts as a downstream signal molecule in salicylic acid-induced heat tolerance in maize (Zea mays L.) seedlings.

    PubMed

    Li, Zhong-Guang; Xie, Lin-Run; Li, Xiao-Juan

    2015-04-01

    Salicylic acid (SA), 2-hydroxy benzoic acid, is a small phenolic compound with multifunction that is involved in plant growth, development, and the acquisition of stress tolerance. In recent years, hydrogen sulfide (H2S) has been found to have similar functions, but cross talk between SA and H2S in the acquisition of heat tolerance is not clear. In this study, pretreatment of maize seedlings with SA improved the survival percentage of seedlings under heat stress, indicating that SA pretreatment could improve the heat tolerance of maize seedlings. In addition, treatment with SA enhanced the activity of L-cysteine desulfhydrase (L-DES), a key enzyme in H2S biosynthesis, which in turn induced accumulation of endogenous H2S. Interestingly, SA-induced heat tolerance was enhanced by addition of NaHS, a H2S donor, but weakened by specific inhibitors of H2S biosynthesis DL-propargylglycine (PAG) and its scavenger hydroxylamine (HT). Furthermore, pretreatment with paclobutrazol (PAC) and 2-aminoindan-2-phosphonic acid (AIP), inhibitors of SA biosynthesis, had no significant effect on NaHS-induced heat tolerance of maize seedlings. Similarly, significant change in the activities of phenylalanine ammonia lyase (PAL) and benzoic-acid-2-hydroxylase (BA2H), the key enzymes in SA biosynthesis, and the content of endogenous SA, was not observed in maize seedlings by NaHS treatment. All of the above-mentioned results suggest that SA pretreatment could improve the heat tolerance of maize seedlings, and H2S might be a novel downstream signal molecule in SA-induced heat tolerance. PMID:25727780

  2. Flux balance analysis of mixed microbial cultures: application to the production of polyhydroxyalkanoates from complex mixtures of volatile fatty acids.

    PubMed

    Pardelha, Filipa; Albuquerque, Maria G E; Reis, Maria A M; Dias, João M L; Oliveira, Rui

    2012-12-31

    Fermented agro-industrial wastes are potential low cost substrates for polyhydroxyalkanoates (PHA) production by mixed microbial cultures (MMC). The use of complex substrates has however profound implications in the PHA metabolism. In this paper we investigate PHA accumulation using a lumped metabolic model that describes PHA storage from arbitrary mixtures of volatile fatty acids (VFA). Experiments were conducted using synthetic and complex VFA mixtures obtained from the fermentation of sugar cane molasses. Metabolic flux analysis (MFA) and flux balance analysis (FBA) were performed at different stages of culture enrichment in order to investigate the effect of VFA composition and time of enrichment in PHA storage efficiency. Substrate uptake and PHA storage fluxes increased over enrichment time by 70% and 73%, respectively. MFA calculations show that higher PHA storage fluxes are associated to an increase in the uptake of VFA with even number of carbon atoms and a more effective synthesis of hydroxyvalerate (HV) precursors from VFA with odd number of carbons. Furthermore, FBA shows that the key metabolic objective of a MMC subjected to the feast and famine regimen is the minimization of the tricarboxylic acid cycle fluxes. The PHA flux and biopolymer composition (hydroxybutyrate (HB): HV) could be accurately predicted in several independent experiments. PMID:23036926

  3. Formation of volatile compounds in kefir made of goat and sheep milk with high polyunsaturated fatty acid content.

    PubMed

    Cais-Sokolińska, D; Wójtowski, J; Pikul, J; Danków, R; Majcher, M; Teichert, J; Bagnicka, E

    2015-10-01

    This article explored the formation of volatile compounds during the production of kefir from goat and sheep milks with high polyunsaturated fatty acids (PUFA) as a result of feeding animals forage supplemented with maize dried distillers grains with solubles (DDGS). The increased PUFA content of the goat and sheep milks resulted in significant changes to the fermentation process. In particular, apart from an increase in the time taken to ferment sheep milk, fermentation yielded less 2,3-butanedione. The highest quantities of this compound were assayed in kefir produced from goat milk with an increased content of PUFA. An increase of PUFA significantly elevated ethanal synthesis during lactose-alcohol fermentation of sheep milk. Neither the origin of milk (sheep or goat) nor the level of PUFA had any statistical effect on the amount of ethanal assayed during the fermentation of milk and within the finished product. The proportion of l(+)-lactic acid was higher in kefirs produced using goat milk compared with sheep milk and did not depend on the content of PUFA in milk fat. The content of PUFA had a significant effect on the aroma profile of the resulting kefirs. An increase in PUFA content resulted in the loss of whey aroma in goat milk kefirs and the animal odor in sheep milk kefirs, and a creamy aroma became more prevalent in kefirs made from sheep milk. PMID:26277315

  4. Volatile fatty acids influence on the structure of microbial communities producing PHAs.

    PubMed

    Ciesielski, Slawomir; Przybylek, Grzegorz

    2014-01-01

    Polyhydroxyalkanoates (PHAs) can be produced by microorganisms and are a biodegradable alternative to fossil-fuel based plastics. Currently, the focus is on reducing production costs by exploring alternative substrates for PHAs production, and on producing copolymers which are less brittle than monomers. Accordingly, this study used a substrate consisting of wastewater from waste-glycerol fermentation, supplemented with different amounts of acetic and propionic acids. These substrates were used to feed mixed microbial communities enriched from activated sludge in a sequencing batch reactor. A reactor supplemented with 2 mL of acetic acid produced 227.8 mg/L of a homopolymer of hydroxybutyrate (3 HB); 4 mL of acetic acid produced 279.8 mg/L 3 HB; whereas 4 mL of propionic acid produced 673.0 mg/L of a copolymer of 3 HB and 3 HV (hydroxyvalerate). Ribosomal Intergenic Spacer Analysis (RISA) was used to show the differences between the communities created in the reactors. Thauera species predominated in biomass that produced 3 HB; Paracoccus denitrificans in the biomass that produced 3 HB-co-3 HV. Because P. denitrificans produced the more desirable copolymer, it may be advantageous to promote its growth in PHAs-producing reactors by adding propionate. PMID:25242921

  5. Inoculant effects on alfalfa silage: in vitro gas and volatile fatty acid production

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Alfalfa silages from two similar trials, 15 treatments with an untreated control and 14 lactic acid bacterial inoculants, were analyzed for in vitro ruminal gas production. First cut (477 g DM/kg) and second cut (393 g DM/kg) alfalfa had been ensiled in glass jars for a minimum of 30 days at room te...

  6. Production of hydrogen, ethanol and volatile fatty acids from the seaweed carbohydrate mannitol.

    PubMed

    Xia, Ao; Jacob, Amita; Herrmann, Christiane; Tabassum, Muhammad Rizwan; Murphy, Jerry D

    2015-10-01

    Fermentative hydrogen from seaweed is a potential biofuel of the future. Mannitol, which is a typical carbohydrate component of seaweed, was used as a substrate for hydrogen fermentation. The theoretical specific hydrogen yield (SHY) of mannitol was calculated as 5 mol H2/mol mannitol (615.4 mL H2/g mannitol) for acetic acid pathway, 3 mol H2/mol mannitol (369.2 mL H2/g mannitol) for butyric acid pathway and 1 mol H2/mol mannitol (123.1 mL H2/g mannitol) for lactic acid and ethanol pathways. An optimal SHY of 1.82 mol H2/mol mannitol (224.2 mL H2/g mannitol) was obtained by heat pre-treated anaerobic digestion sludge under an initial pH of 8.0, NH4Cl concentration of 25 mM, NaCl concentration of 50mM and mannitol concentration of 10 g/L. The overall energy conversion efficiency achieved was 96.1%. The energy was contained in the end products, hydrogen (17.2%), butyric acid (38.3%) and ethanol (34.2%). PMID:26163759

  7. Disulfooxy fatty acids from the American bird grasshopper Schistocerca americana, elicitors of plant volatiles

    Technology Transfer Automated Retrieval System (TEKTRAN)

    A new class of compounds has been isolated from the regurgitant of the grasshopper species Schistocerca americana. These compounds (named here caeliferins) are comprised of saturated and monounsaturated, sulfated alpha-hydroxy fatty acids in which the omega carbon is functionalized with either a su...

  8. Novel fatty acid-related compounds from the American bird grasshopper, Schistocerca americana, elicit plant volatiles

    Technology Transfer Automated Retrieval System (TEKTRAN)

    A new class of compounds has been isolated from the regurgitant of the grasshopper, Schistocerca americana. These compounds (named caeliferins) are comprised of unusual saturated and monounsaturated, alpha- and omega-substituted fatty acids. The regurgitant contains a series of these compounds wit...

  9. Volatile fatty acids influence on the structure of microbial communities producing PHAs

    PubMed Central

    Ciesielski, Slawomir; Przybylek, Grzegorz

    2014-01-01

    Polyhydroxyalkanoates (PHAs) can be produced by microorganisms and are a biodegradable alternative to fossil-fuel based plastics. Currently, the focus is on reducing production costs by exploring alternative substrates for PHAs production, and on producing copolymers which are less brittle than monomers. Accordingly, this study used a substrate consisting of wastewater from waste-glycerol fermentation, supplemented with different amounts of acetic and propionic acids. These substrates were used to feed mixed microbial communities enriched from activated sludge in a sequencing batch reactor. A reactor supplemented with 2 mL of acetic acid produced 227.8 mg/L of a homopolymer of hydroxybutyrate (3HB); 4 mL of acetic acid produced 279.8 mg/L 3HB; whereas 4 mL of propionic acid produced 673.0 mg/L of a copolymer of 3HB and 3HV (hydroxyvalerate). Ribosomal Intergenic Spacer Analysis (RISA) was used to show the differences between the communities created in the reactors. Thauera species predominated in biomass that produced 3HB; Paracoccus denitrificans in the biomass that produced 3HB-co-3HV. Because P. denitrificans produced the more desirable copolymer, it may be advantageous to promote its growth in PHAs-producing reactors by adding propionate. PMID:25242921

  10. Microbial- and thiosulfate-mediated dissolution of mercury sulfide minerals and transformation to gaseous mercury.

    PubMed

    Vázquez-Rodríguez, Adiari I; Hansel, Colleen M; Zhang, Tong; Lamborg, Carl H; Santelli, Cara M; Webb, Samuel M; Brooks, Scott C

    2015-01-01

    Mercury (Hg) is a toxic heavy metal that poses significant environmental and human health risks. Soils and sediments, where Hg can exist as the Hg sulfide mineral metacinnabar (β-HgS), represent major Hg reservoirs in aquatic environments. Metacinnabar has historically been considered a sink for Hg in all but severely acidic environments, and thus disregarded as a potential source of Hg back to aqueous or gaseous pools. Here, we conducted a combination of field and laboratory incubations to identify the potential for metacinnabar as a source of dissolved Hg within near neutral pH environments and the underpinning (a)biotic mechanisms at play. We show that the abundant and widespread sulfur-oxidizing bacteria of the genus Thiobacillus extensively colonized metacinnabar chips incubated within aerobic, near neutral pH creek sediments. Laboratory incubations of axenic Thiobacillus thioparus cultures led to the release of metacinnabar-hosted Hg(II) and subsequent volatilization to Hg(0). This dissolution and volatilization was greatly enhanced in the presence of thiosulfate, which served a dual role by enhancing HgS dissolution through Hg complexation and providing an additional metabolic substrate for Thiobacillus. These findings reveal a new coupled abiotic-biotic pathway for the transformation of metacinnabar-bound Hg(II) to Hg(0), while expanding the sulfide substrates available for neutrophilic chemosynthetic bacteria to Hg-laden sulfides. They also point to mineral-hosted Hg as an underappreciated source of gaseous elemental Hg to the environment. PMID:26157421

  11. Microbial- and thiosulfate-mediated dissolution of mercury sulfide minerals and transformation to gaseous mercury

    PubMed Central

    Vázquez-Rodríguez, Adiari I.; Hansel, Colleen M.; Zhang, Tong; Lamborg, Carl H.; Santelli, Cara M.; Webb, Samuel M.; Brooks, Scott C.

    2015-01-01

    Mercury (Hg) is a toxic heavy metal that poses significant environmental and human health risks. Soils and sediments, where Hg can exist as the Hg sulfide mineral metacinnabar (β-HgS), represent major Hg reservoirs in aquatic environments. Metacinnabar has historically been considered a sink for Hg in all but severely acidic environments, and thus disregarded as a potential source of Hg back to aqueous or gaseous pools. Here, we conducted a combination of field and laboratory incubations to identify the potential for metacinnabar as a source of dissolved Hg within near neutral pH environments and the underpinning (a)biotic mechanisms at play. We show that the abundant and widespread sulfur-oxidizing bacteria of the genus Thiobacillus extensively colonized metacinnabar chips incubated within aerobic, near neutral pH creek sediments. Laboratory incubations of axenic Thiobacillus thioparus cultures led to the release of metacinnabar-hosted Hg(II) and subsequent volatilization to Hg(0). This dissolution and volatilization was greatly enhanced in the presence of thiosulfate, which served a dual role by enhancing HgS dissolution through Hg complexation and providing an additional metabolic substrate for Thiobacillus. These findings reveal a new coupled abiotic-biotic pathway for the transformation of metacinnabar-bound Hg(II) to Hg(0), while expanding the sulfide substrates available for neutrophilic chemosynthetic bacteria to Hg-laden sulfides. They also point to mineral-hosted Hg as an underappreciated source of gaseous elemental Hg to the environment. PMID:26157421

  12. Effect of infused volatile fatty acids and caseinate on milk composition and coagulation in dairy cows.

    PubMed

    Hurtaud, C; Rulquin, H; Verite, R

    1993-10-01

    Milk protein secretion is changed by increasing the proportion of energy, mainly as propionic acid, or the availability of AA. Whether associative effects exist between energy nature and protein amounts is unknown. Therefore, ruminal isoenergetic infusions of low or high propionate mixtures were combined factorially with duodenal infusion of sodium caseinate or control. Four ruminally and duodenally fistulated Holstein cows were used. The diet was limited and consisted of 70% forage and 30% concentrate. Caseinate infusion increased milk yield and protein and casein contents and decreased milk fat content; curd yields and coagulation properties of milk were improved. The infusion of propionic acid caused a large increase in rumen propionate. Milk yield tended to decrease, and milk fat decreased, but protein, casein, and curd yields were unchanged; milk-coagulating properties were improved. No interaction existed between energy and protein amounts. Alteration of VFA had little effect on milk composition, but increasing the protein supply to the duodenum increased milk protein. PMID:8227627

  13. Method for the extraction of the volatile compound salicylic acid from tobacco leaf material.

    PubMed

    Verberne, Marianne C; Brouwer, Nynke; Delbianco, Federica; Linthorst, Huub J M; Bol, John F; Verpoorte, Robert

    2002-01-01

    Salicylic acid (SA) is a signalling compound in plants which is able to induce systemic acquired resistance. In the analysis of SA in plant tissues, the extraction recovery is often very low and variable. This is mainly caused by sublimation of SA, especially during evaporation of organic solvents. Techniques have been designed in order to overcome this problem. In the first part of the extraction procedure, sublimation of SA was prevented by addition of 0.2 M sodium hydroxide. At a later stage of the extraction procedure, sublimation of SA during solvent evaporation was controlled by the addition of a small amount of HPLC eluent. In this way, recoveries in the range of 71-91% for free SA and 65-79% for acid-hydrolysed SA were obtained. Recoveries could be further optimised by the use of an internal standard to correct for volume changes after the addition of the HPLC eluent. PMID:11899606

  14. Combined effect of starch/montmorillonite coating and passive MAP in antioxidant activity, total phenolics, organic acids and volatile of fresh-cut carrots.

    PubMed

    Guimarães, Isabela Costa; dos Reis, Kelen Cristina; Menezes, Evandro Galvão Tavares; Borges, Paulo Rogério Siriano; Rodrigues, Ariel Costa; Leal, Renato; Hernandes, Thais; de Carvalho, Elisângela Helena Nunes; Vilas Boas, Eduardo Valério de Barros

    2016-01-01

    This work evaluates fresh-cut carrots (FCC) coated with montmorillonite (MMT) subjected to passive modified atmosphere packaging. Carrots were sanitized, cooled, peeled and sliced. Half of the FCC were coated with MMT nanoparticle film and the other half were not. All FCCs were packed in a polypropylene rigid tray, covered with a polypropylene rigid lid or sealed with polyethylene + propylene film, in four treatments (RL, rigid lid; RLC, rigid lid + coating; ST, sealed tray; STC, sealed tray + coating). FCCs were stored at 4 °C and were analyzed weekly for 4 weeks (total antioxidant activity by 2,2-diphenyl-1-picryl hydrazyl method and the β-carotene/linoleic acid, phenolic compounds, organic acids and volatile compounds). The use of coating film with starch nanoparticles and a modified atmosphere leads to the preservation of the total antioxidant activity, the volatile and organic acids of FCC. PMID:26857136

  15. Quantitative analysis of growth and volatile fatty acid production by the anaerobic ruminal bacterium Megasphaera elsdenii T81.

    PubMed

    Weimer, P J; Moen, G N

    2013-05-01

    Megasphaera elsdenii T81 grew on either DL-lactate or D-glucose at similar rates (0.85 h(-1)) but displayed major differences in the fermentation of these substrates. Lactate was fermented at up to 210-mM concentration to yield acetic, propionic, butyric, and valeric acids. The bacterium was able to grow at much higher concentrations of D-glucose (500 mM), but never removed more than 80 mM of glucose from the medium, and nearly 60 % the glucose removed was sequestered as intracellular glycogen, with low yields of even-carbon acids (acetate, butyrate, caproate). In the presence of both substrates, glucose was not used until lactate was nearly exhausted, even by cells pregrown on glucose. Glucose-grown cultures maintained only low extracellular concentrations of acetate, and addition of exogenous acetate increased yields of butyrate, but not caproate. By contrast, exogenous acetate had little effect on lactate fermentation. At pH 6.6, growth rate was halved by exogenous addition of 60 mM propionate, 69 mM butyrate, 44 mM valerate, or 33 mM caproate; at pH 5.9, these values were reduced to 49, 49, 18, and 22 mM, respectively. The results are consistent with this species' role as an effective ruminal lactate consumer and suggest that this organism may be useful for industrial production of volatile fatty acids from lactate if product tolerance could be improved. The poor fermentation of glucose and sensitivity to caproate suggests that this strain is not practical for industrial caproate production. PMID:23271673

  16. Functional analysis of a tomato salicylic acid methyl transferase and its role in synthesis of the flavor volatile methyl salicylate.

    PubMed

    Tieman, Denise; Zeigler, Michelle; Schmelz, Eric; Taylor, Mark G; Rushing, Sarah; Jones, Jeffrey B; Klee, Harry J

    2010-04-01

    Methyl salicylate (MeSA) is a volatile plant secondary metabolite that is an important contributor to taste and scent of many fruits and flowers. It is synthesized from salicylic acid (SA), a phytohormone that contributes to plant pathogen defense. MeSA is synthesized by members of a family of O-methyltransferases. In order to elaborate the mechanism of MeSA synthesis in tomato, we screened a set of O-methyltransferases for activity against multiple substrates. An enzyme that specifically catalyzes methylation of SA, SlSAMT, as well as enzymes that act upon jasmonic acid and indole-3-acetic acid were identified. Analyses of transgenic over- and under-producing lines validated the function of SlSAMT in vivo. The SlSAMT gene was mapped to a position near the bottom of chromosome 9. Analysis of MeSA emissions from an introgression population derived from a cross with Solanum pennellii revealed a quantitative trait locus (QTL) linked to higher fruit methyl salicylate emissions. The higher MeSA emissions associate with significantly higher SpSAMT expression, consistent with SAMT gene expression being rate limiting for ripening-associated MeSA emissions. Transgenic plants that constitutively over-produce MeSA exhibited only slightly delayed symptom development following infection with the disease-causing bacterial pathogen, Xanthomonas campestris pv. vesicatoria (Xcv). Unexpectedly, pathogen-challenged leaves accumulated significantly higher levels of SA as well as glycosylated forms of SA and MeSA, indicating a disruption in control of the SA-related metabolite pool. Taken together, the results indicate that SlSAMT is critical for methyl salicylate synthesis and methyl salicylate, in turn, likely has an important role in controlling SA synthesis. PMID:20070566

  17. Molar proportions of volatile fatty acids in the gastrointestinal tract of East African wild ruminants.

    PubMed

    Clemens, E T; Maloiy, G M; Sutton, J D

    1983-01-01

    The molar proportions of seven individual VFA's were determined at select sites along the gastrointestinal tract of sixteen species of East African wild ruminants. The resulting data were statistically analyzed for species effect, and for effects due to major feeding groups (browsers, grazers, fresh grass grazers, etc.) and for body weight groups (5-750 kg animals). Present data suggest that body weight, rather than diet, is the more influential factor in reticulo-rumen fermentation rate, and in the molar proportion of fatty acids present. The molar proportions of VFA's observed in the mid and hindgut of these wild ruminants appeared more responsive to diet and body weight of the animal than did foregut VFA values. PMID:6139202

  18. Protozoan, Bacterial, and Volatile Fatty Acid Changes Associated with Feeding Tylosin

    PubMed Central

    Satapathy, N.; Purser, D. B.

    1967-01-01

    Tylosin was fed to two of six wethers for 79 days, to a second two for only 28 days, and not at all to a third pair (controls). The addition of tylosin to the daily feed resulted in a rapid twofold increase in protozoal concentration and a change in the composition or characteristics, or both, of the bacterial population. The results indicate that the bacterial population was modified to the extent of about 80%. Total acid concentrations were initially depressed but appeared to be greater than those in control animals at the termination of the experiment. Deletion of tylosin from the ration resulted in a rapid decrease in protozoal concentrations, whereas changes in the bacterial population did not occur for a further 30 days. PMID:16349756

  19. The use of concentrated monosodium glutamate wastewater as a conditioning agent for adjusting acidity and minimizing ammonia volatilization in livestock manure composting.

    PubMed

    Liu, Li; Kong, Haimin; Lu, Beibei; Wang, Jibing; Xie, Yuan; Fang, Ping

    2015-09-15

    In this study, concentrated monosodium glutamate waste (CMGW) was proposed as a conditioning agent to adjust acidity and decrease ammonia (NH3) volatilization in thermophilic aerobic composting based on two incubation experiments. The results showed that with the addition of CMGW, NH3 volatilization of compost mixture under high temperature phase decreased significantly and pH met the current national standard within 5.5-8.5. When CMGW dosage increased to 2% (v/w), the decrease in NH3 volatilization was as high as 78.9%. This effect was enhanced by repeated application of CMGW. Furthermore, although the electrical conductivity increased with the application of CMGW, both the germination index and the microbial respiration of compost mixture implied that CMGW had no negative effects on the maturity of compost, instead, a comprehensive maturity might be accelerated. It was concluded that CMGW was an optional conditioning agent for thermophilic aerobic composting of livestock manure in regards to adjusting acidity and preventing nitrogen loss from NH3 volatilization. PMID:26164271

  20. Effects of irrigation regimes on fatty acid composition, antioxidant and antifungal properties of volatiles from fruits of Koroneiki cultivar grown under Tunisian conditions.

    PubMed

    Brahmi, Faten; Chehab, Hechmi; Flamini, Guido; Dhibi, Madiha; Issaoui, Manel; Mastouri, Maha; Hammami, Mohamed

    2013-11-15

    The olive tree is generally grown under rain-fed conditions. However, since the yield response to irrigation is great, even with low amounts of water, there is increasing interest in irrigated agriculture. The main goal of this study was, therefore, to investigate the effect of irrigation regimes on olive (Olea europaea L., cv. Koroneiki) obtained from an intensively-managed orchard in a semi-arid area with a Mediterranean climate in Tunisia. Different irrigation treatments 50% ETc, 75% ETc and 100% ETc were applied to the olive orchard. Accordingly, the effects of three irrigation regimes on volatile compounds, fatty acid composition and biological activities of Koroneiki cultivar were studied. The total profile of the volatile constituents of all samples revealed the predominance of 3-ethenylpyridine (from 14.9-19.6%), phenylethyl alcool (from 7.8-19.2%) and benzaldehyde (from 9.0 to 13.8%). During watering level treatments studied, the major fatty acids were oleic, palmitic and linoleic. Antioxidant activity of the fresh fruit volatiles cultivated at a watering level of 100% ETc was higher than that obtained under 50 and 75% Etc. The results of antifungal activity showed that the fruits volatiles of the three irrigation treatments had varying degrees of growth inhibition against the microorganisms tested. PMID:24511688

  1. Investigation into the effect of high concentrations of volatile fatty acids in anaerobic digestion on methanogenic communities.

    PubMed

    Franke-Whittle, Ingrid H; Walter, Andreas; Ebner, Christian; Insam, Heribert

    2014-11-01

    A study was conducted to determine whether differences in the levels of volatile fatty acids (VFAs) in anaerobic digester plants could result in variations in the indigenous methanogenic communities. Two digesters (one operated under mesophilic conditions, the other under thermophilic conditions) were monitored, and sampled at points where VFA levels were high, as well as when VFA levels were low. Physical and chemical parameters were measured, and the methanogenic diversity was screened using the phylogenetic microarray ANAEROCHIP. In addition, real-time PCR was used to quantify the presence of the different methanogenic genera in the sludge samples. Array results indicated that the archaeal communities in the different reactors were stable, and that changes in the VFA levels of the anaerobic digesters did not greatly alter the dominating methanogenic organisms. In contrast, the two digesters were found to harbour different dominating methanogenic communities, which appeared to remain stable over time. Real-time PCR results were inline with those of microarray analysis indicating only minimal changes in methanogen numbers during periods of high VFAs, however, revealed a greater diversity in methanogens than found with the array. PMID:25164858

  2. Investigation into the effect of high concentrations of volatile fatty acids in anaerobic digestion on methanogenic communities

    PubMed Central

    Franke-Whittle, Ingrid H.; Walter, Andreas; Ebner, Christian; Insam, Heribert

    2014-01-01

    A study was conducted to determine whether differences in the levels of volatile fatty acids (VFAs) in anaerobic digester plants could result in variations in the indigenous methanogenic communities. Two digesters (one operated under mesophilic conditions, the other under thermophilic conditions) were monitored, and sampled at points where VFA levels were high, as well as when VFA levels were low. Physical and chemical parameters were measured, and the methanogenic diversity was screened using the phylogenetic microarray ANAEROCHIP. In addition, real-time PCR was used to quantify the presence of the different methanogenic genera in the sludge samples. Array results indicated that the archaeal communities in the different reactors were stable, and that changes in the VFA levels of the anaerobic digesters did not greatly alter the dominating methanogenic organisms. In contrast, the two digesters were found to harbour different dominating methanogenic communities, which appeared to remain stable over time. Real-time PCR results were inline with those of microarray analysis indicating only minimal changes in methanogen numbers during periods of high VFAs, however, revealed a greater diversity in methanogens than found with the array. PMID:25164858

  3. Investigation into the effect of high concentrations of volatile fatty acids in anaerobic digestion on methanogenic communities

    SciTech Connect

    Franke-Whittle, Ingrid H.; Walter, Andreas; Ebner, Christian; Insam, Heribert

    2014-11-15

    Highlights: • Different methanogenic communities in mesophilic and thermophilic reactors. • High VFA levels do not cause major changes in archaeal communities. • Real-time PCR indicated greater diversity than ANAEROCHIP microarray. - Abstract: A study was conducted to determine whether differences in the levels of volatile fatty acids (VFAs) in anaerobic digester plants could result in variations in the indigenous methanogenic communities. Two digesters (one operated under mesophilic conditions, the other under thermophilic conditions) were monitored, and sampled at points where VFA levels were high, as well as when VFA levels were low. Physical and chemical parameters were measured, and the methanogenic diversity was screened using the phylogenetic microarray ANAEROCHIP. In addition, real-time PCR was used to quantify the presence of the different methanogenic genera in the sludge samples. Array results indicated that the archaeal communities in the different reactors were stable, and that changes in the VFA levels of the anaerobic digesters did not greatly alter the dominating methanogenic organisms. In contrast, the two digesters were found to harbour different dominating methanogenic communities, which appeared to remain stable over time. Real-time PCR results were inline with those of microarray analysis indicating only minimal changes in methanogen numbers during periods of high VFAs, however, revealed a greater diversity in methanogens than found with the array.

  4. Oenological characteristics, amino acids and volatile profiles of Hongqu rice wines during pottery storage: Effects of high hydrostatic pressure processing.

    PubMed

    Tian, Yuting; Huang, Jiamei; Xie, Tingting; Huang, Luqiang; Zhuang, Weijin; Zheng, Yafeng; Zheng, Baodong

    2016-07-15

    Hongqu rice wines were subjected to high hydrostatic pressure (HHP) treatments of 200 MPa and 550 MPa at 25 °C for 30 min and effects on wine quality during pottery storage were examined. HHP treatment can significantly (p<0.05) decrease the content of fusel-like alcohols and maintain the concentration of lactones in these wines. After 18 months of storage, the HHP-treated wines exhibited a more rapid decrease in total sugars (9.3-15.3%), lower free amino acid content (e.g. lysine content decreased by 45.0-84.5%), and higher ketone content (e.g. 6- and 14-fold increase for 2-nonanone). These changes could be attributed to the occurrence of Maillard and oxidation reactions. The wines treated at 550 MPa for 30 min developed about twice as rapidly during pottery storage than untreated wines based on principal component analysis. After only 6 months, treated wines had a volatile composition and an organoleptic quality similar to that of untreated wines stored in pottery for 18 months. PMID:26948638

  5. Improving volatile fatty acids production by exploiting the residual substrates in post-fermented sludge: Protease catalysis of refractory protein.

    PubMed

    Yin, Bo; Liu, Hongbo; Wang, Yuanyuan; Bai, Jie; Liu, He; Fu, Bo

    2016-03-01

    The real cause to the low yield of volatile fatty acids (VFAs), from inhibition or low biodegradation, is uncertain in sludge anaerobic fermentation. In this study, poor biodegradability of proteins and fast decrease of the indigenous hydrolase activity in the residual post-fermented sludge were found to be the major reasons. With the addition of trypsin or alkaline protease in residual post-fermented sludge after primary alkaline fermentation, degradation efficiency of refractory protein increased by 33.6% and 34.8%, respectively. Accordingly, the VFAs yields were improved by 69.7% and 106.1%, respectively. Furthermore, the activities of added trypsin and alkaline protease could maintain at 13.52 U/mL and 19.11 U/mL in the alkaline fermentation process. This study demonstrated that exploiting the refractory proteins in residual post-fermented sludge by protease addition seems to be a very promising way for improving VFAs yield of conventional alkaline fermentations with waste activated sludge. PMID:26722812

  6. Enhancement of acidogenic fermentation for volatile fatty acid production from food waste: Effect of redox potential and inoculum.

    PubMed

    Yin, Jun; Yu, Xiaoqin; Zhang, Yeer; Shen, Dongsheng; Wang, Meizhen; Long, Yuyang; Chen, Ting

    2016-09-01

    The aim of this study was to explore the effects of redox potential (ORP) and inoculum on volatile fatty acids (VFAs) production from food waste by acidogenic fermentation. Four experimental conditions with two ORP levels were tested: limited aeration conditions with ORP level of -100 to -200mV inoculating anaerobic sludge (LA+AnS) or aerobic sludge (LA+AeS), and anaerobic conditions with ORP level of -200 to -300mV inoculating anaerobic sludge with 2-bromoethanosulfophate (AN+BES) and without BES (AN). The maximal VFA yield (0.79g COD/g VS) was attained in LA+AnS reactor due to enhanced hydrolysis of substrates, especially proteins (degradation efficiency 78.3%). A higher frequency of phylum Firmicutes under limited aeration conditions (42.2-48.2%) was observed than that under anaerobic conditions (21.1%). The microbial community was more diverse in LA+AnS reactors than LA+AeS. We conclude that appropriate ORP level (from -100 to -200mV) and inoculum play essential roles in VFA production. PMID:27343452

  7. Influence of Volatile Fatty Acids on Nitrite Accumulation by a Pseudomonas stutzeri Strain Isolated from a Denitrifying Fluidized Bed Reactor

    PubMed Central

    van Rijn, J.; Tal, Y.; Barak, Y.

    1996-01-01

    Intermediate nitrite accumulation during denitrification by Pseudomonas stutzeri isolated from a denitrifying fluidized bed reactor was examined in the presence of different volatile fatty acids. Nitrite accumulated when acetate or propionate served as the carbon and electron source but did not accumulate in the presence of butyrate, valerate, or caproate. Nitrite accumulation in the presence of acetate was caused by differences in the rates of nitrate and nitrite reduction and, in addition, by competition between nitrate and nitrite reduction pathways for electrons. Incubation of the cells with butyrate resulted in a slower nitrate reduction rate and a faster nitrite reduction rate than incubation with acetate. Whereas nitrate inhibited the nitrite reduction rate in the presence of acetate, no such inhibition was found in butyrate-supplemented cells. Cytochromes b and c were found to mediate electron transport during nitrate reduction by the cells. Cytochrome c was reduced via a different pathway when nitrite-reducing cells were incubated with acetate than when they were incubated with butyrate. Furthermore, addition of antimycin A to nitrite-reducing cells resulted in partial inhibition of electron transport to cytochrome c in acetate-supplemented cells but not in butyrate-supplemented cells. On the basis of these findings, we propose that differences in intermediate nitrite accumulation are caused by differences in electron flow to nitrate and nitrite reductases during oxidation of either acetate or butyrate. PMID:16535368

  8. Selective chemical dissolution of sulfides: An evaluation of six methods applicable to assaying sulfide-bound nickel

    USGS Publications Warehouse

    Klock, P.R.; Czamanske, G.K.; Foose, M.; Pesek, J.

    1986-01-01

    Six analytical techniques for the selective chemical dissolution of sulfides are compared with the purpose of defining the best method for accurately determining the concentration of sulfide-bound nickel. Synthesized sulfide phases of known elemental content, mixed with well-analyzed silicates, were used to determine the relative and absolute efficiency, based on Ni and Mg recovery, of the techniques. Tested leach-methods purported to dissolve sulfide from silicate phases include: brominated water, brominated water-carbon tetrachloride, nitric-hydrochloric acid, hydrogen peroxide-ammonium citrate, bromine-methanol and hydrogen peroxide-ascorbic acid. Only the hydrogen peroxide-ammonium citrate method did not prove adequate in dissolving the sulfide phases. The remaining five methods dissolved the sulfide phases, but the indicated amount of attack on the silicate portion ranged from 3% to 100%. The bromine-methanol method is recommended for assaying sulfide-Ni deposits when Ni is also present in silicate phases. ?? 1986.

  9. Inhibition of volatile compounds derived from fatty acid oxygenation with chilling and heating treatments and their influences on the oxylipin pathawy gene expression and enzyme activity levels in tomato (Solanum lycopersicon

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Hexanal, Z-3-hexenal, E-2-hexenal, hexanol and Z-3-hexenol are major tomato (Solanum Lycopersicon) volatile aromas derived from oxygenation of unsaturated fatty acids. Chilling or heating treatments suppress production of these C6 volatiles. The objective of this research was to determine the respon...

  10. Cadmium sulfide membranes

    DOEpatents

    Spanhel, Lubomir; Anderson, Marc A.

    1992-07-07

    A method is described for the creation of novel q-effect cadmium sulfide membranes. The membranes are made by first creating a dilute cadmium sulfide colloid in aqueous suspension and then removing the water and excess salts therefrom. The cadmium sulfide membrane thus produced is luminescent at room temperature and may have application in laser fabrication.

  11. Cadmium sulfide membranes

    DOEpatents

    Spanhel, Lubomir; Anderson, Marc A.

    1991-10-22

    A method is described for the creation of novel q-effect cadmium sulfide membranes. The membranes are made by first creating a dilute cadmium sulfide colloid in aqueous suspension and then removing the water and excess salts therefrom. The cadmium sulfide membrane thus produced is luminescent at room temperature and may have application in laser fabrication.

  12. Thiobarbituric acid reactive substances and volatile compounds in chicken breast meat infused with plant extracts and subjected to electron beam irradiation.

    PubMed

    Rababah, T; Hettiarachchy, N S; Horax, R; Cho, M J; Davis, B; Dickson, J

    2006-06-01

    The effect of irradiation on thiobarbituric acid reactive substances (TBARS) and volatile compounds in raw and cooked nonirradiated and irradiated chicken breast meat infused with green tea and grape seed extracts was investigated. Chicken breast meat was vacuum infused with green tea extract (3,000 ppm), grape seed extract (3,000 ppm), or their combination (at a total of 6,000 ppm), irradiated with an electron beam, and stored at 5 degrees C for 12 d. The targeted irradiation dosage was 3.0 kGy and the average absorbed dosage was 3.12 kGy. Values of TBARS and volatile compound contents of raw and cooked chicken meat were determined during the 12-d storage period. Thiobarbituric acid reactive substances values ranged from 15.5 to 71.4 mg of malondialdehyde/kg for nonirradiated raw chicken and 17.3 to 80.1 mg of malondialdehyde/kg for irradiated raw chicken. Values for cooked chicken ranged from 31.4 to 386.2 and 38.4 to 504.1 mg of malondialdehyde/kg for nonirradiated and irradiated chicken, respectively. Irradiation increased TBARS and hexanal values of controls and meat infused with plant extracts. Hexanal had the highest intensity of volatiles followed by pentanal and other volatiles. Cooking the samples significantly (P < 0.05) increased the amounts of TBARS and volatiles. Addition of plant extracts decreased the amount of TBARS as well as hexanal and pentanal values. Although irradiation increases lipid oxidation, infusion of chicken meat with plant extracts could reduce lipid oxidation caused by irradiation. PMID:16776483

  13. Measurement of non-enteric emission fluxes of volatile fatty acids from a California dairy by solid phase micro-extraction with gas chromatography/mass spectrometry

    NASA Astrophysics Data System (ADS)

    Alanis, Phillip; Sorenson, Mark; Beene, Matt; Krauter, Charles; Shamp, Brian; Hasson, Alam S.

    Dairies are a major source of volatile organic compounds (VOCs) in California's San Joaquin Valley; a region that experiences high ozone levels during summer. Short-chain carboxylic acids, or volatile fatty acids (VFAs), are believed to make up a large fraction of VOC emissions from these facilities, although there are few studies to substantiate this. In this work, a method using a flux chamber coupled to solid phase micro-extraction (SPME) fibers followed by analysis using gas chromatography/mass spectrometry was developed to quantify emissions of six VFAs (acetic acid, propanoic acid, butanoic acid, pentanoic acid, hexanoic acid and 3-methyl butanoic acid) from non-enteric sources. The technique was then used to quantify VFA fluxes from a small dairy located on the campus of California State University Fresno. Both animal feed and animal waste are found to be major sources of VFAs, with acetic acid contributing 70-90% of emissions from the sources tested. Measured total acid fluxes during spring (with an average temperature of 20 °C) were 1.84 ± 0.01, 1.06 ± 0.08, (1.3 ± 0.5) × 10 -2, (1.7 ± 0.2) × 10 -2 and (1.2 ± 0.5) × 10 -2 g m -2 h -1 from silage, total mixed rations, flushing lane, open lot and lagoon sources, respectively. VFA emissions from the sources tested total 390 ± 80 g h -1. The data indicate high fluxes of VFAs from dairy facilities, but differences in the design and operation of dairies in the San Joaquin Valley as well as seasonal variations mean that additional measurements must be made to accurately determine emissions inventories for the region.

  14. Exploring the in vitro formation of trimethylarsine sulfide from dimethylthioarsinic acid in anaerobic microflora of mouse cecum using HPLC-ICP-MS and HPLC-ESI-MS

    SciTech Connect

    Kubachka, Kevin M.; Kohan, Michael C.; Herbin-Davis, Karen; Creed, John T. Thomas, David J.

    2009-09-01

    Although metabolism of arsenicals to form methylated oxoarsenical species has been extensively studied, less is known about the formation of thiolated arsenical species that have recently been detected as urinary metabolites. Indeed, their presence suggests that the metabolism of ingested arsenic is more complex than previously thought. Recent reports have shown that thiolated arsenicals can be produced by the anaerobic microflora of the mouse cecum, suggesting that metabolism prior to systemic absorption may be a significant determinant of the pattern and extent of exposure to various arsenic-containing species. Here, we examined the metabolism of {sup 34}S labeled dimethylthioarsinic acid ({sup 34}S-DMTA{sup V}) by the anaerobic microflora of the mouse cecum using HPLC-ICP-MS and HPLC-ESI-MS/MS to monitor for the presence of various oxo- and thioarsenicals. The use of isotopically enriched {sup 34}S-DMTA{sup V} made it possible to differentiate among potential metabolic pathways for production of the trimethylarsine sulfide (TMAS{sup V}). Upon in vitro incubation in an assay containing anaerobic microflora of mouse cecum, {sup 34}S-DMTA{sup V} underwent several transformations. Labile {sup 34}S was exchanged with more abundant {sup 32}S to produce {sup 32}S-DMTA{sup V}, a thiol group was added to yield DMDTA{sup V}, and a methyl group was added to yield {sup 34}S-TMAS{sup V}. Because incubation of {sup 34}S-DMTA{sup V} resulted in the formation of {sup 34}S-TMAS{sup V}, the pathway for its formation must preserve the arsenic-sulfur bond. The alternative metabolic pathway postulated for formation of TMAS{sup V} from dimethylarsinic acid (DMA{sup V}) would proceed via a dimethylarsinous acid (DMA{sup III}) intermediate and would necessitate the loss of {sup 34}S label. Structural confirmation of the metabolic product was achieved using HPLC-ESI-MS/MS. The data presented support the direct methylation of DMTA{sup V} to TMAS{sup V}. Additionally, the detection of

  15. Uncoupled hydrogen and volatile fatty acids generation in a two-step biotechnological anaerobic process fed with actual site wastewater.

    PubMed

    Monti, Matilde; Scoma, Alberto; Martinez, Gonzalo; Bertin, Lorenzo; Fava, Fabio

    2015-05-25

    Among agro-wastes, olive mill wastewater (OMW) truly qualifies as a high impact organic residue due to its biochemical-rich composition and high annual production. In the present investigation, dephenolized OMW (OMWdeph) was employed as the feedstock for a biotechnological two-stage anaerobic process dedicated to the production of biohydrogen and volatile fatty acids (VFAs), respectively. To this end, two identically configured packed-bed biofilm reactors were operated sequentially. In the first, the hydraulic retention time was set to 1 day, whereas in the second it was equal to 5 days. The rationale was to decouple the hydrolysis of the organic macronutrients held by the OMWdeph, so as to quantitatively generate a biogas enriched in H2 (first stage aim), for the acidogenesis of the residual components left after hydrolysis, to then produce a highly concentrated mixture of VFAs (second stage aim). Results showed that the generation of H2 and VFAs was effectively split, with carbohydrates and lipids, respectively, being the main substrates of the two processes. About 250 ml H2 L(-1) day(-1) was produced, corresponding to a yield of 0.36 mol mol(-1) of consumed carbohydrates (expressed as glucose equivalents). The overall concentration of VFAs in the acidogenic process was 13.80 g COD L(-1), so that 2.76 g COD L(-1) day(-1) was obtained. Second generation biorefineries use a selected fraction of an organic waste to conduct a microbiologically-driven pathway towards the generation of one target molecule. With the proposed approach, a greater value of the waste was attained, since the multi-purpose two-stage process did not entail competition for substrates between the first and the second steps. PMID:25174889

  16. High-rate volatile fatty acid (VFA) production by a granular sludge process at low pH.

    PubMed

    Tamis, J; Joosse, B M; Loosdrecht, M C M van; Kleerebezem, R

    2015-11-01

    Volatile fatty acids (VFA) are proposed platform molecules for the production of basic chemicals and polymers from organic waste streams. In this study we developed a granular sludge process to produce VFA at high rate, yield and purity while minimizing potential operational costs. A lab-scale anaerobic sequencing batch reactor (ASBR) was fed with 10 g l(-1) glucose as model substrate. Inclusion of a short (2 min) settling phase before effluent discharge enabled effective granulation and very high volumetric conversion rates of 150-300 gCOD l(-1)  d(-1) were observed during glucose conversion. The product spectrum remained similar at the tested pH range with acetate and butyrate as the main products, and a total VFA yield of 60-70% on chemical oxygen demand (COD) basis. The requirement for base addition for pH regulation could be reduced from 1.1 to 0.6 mol OH(-) (mol glucose)(-1) by lowering the pH from 5.5 to 4.5. Solids concentrations in the effluent were 0.6 ± 0.3 g l(-1) but could be reduced to 0.02 ± 0.01 g l(-1) by introduction of an additional settling period of 5 min. The efficient production of VFA at low pH with a virtually solid-free effluent increases the economic feasibility of waste-based chemicals and polymer production. Biotechnol. PMID:25950759

  17. Effects of rare earth element lanthanum on rumen methane and volatile fatty acid production and microbial flora in vitro.

    PubMed

    Zhang, T T; Zhao, G Y; Zheng, W S; Niu, W J; Wei, C; Lin, S X

    2015-06-01

    The objectives of the trial were to study the effects of rare earth element (REE) lanthanum (La) on the in vitro rumen methane (CH4 ) and volatile fatty acid (VFA) production and the microbial flora of feeds. Four feed mixtures with different levels of neutral detergent fibre (NDF), that is 20.0% (I), 31.0% (II), 41.9% (III) and 52.7% (IV), were formulated as substrates. Five levels of LaCl3 , that is 0, 0.4, 0.6, 0.8 and 1.0 mmol/kg dry matter (DM), were added to the feed mixtures, respectively, as experimental treatments in a two-factor 5 × 4 randomized design. The in vitro incubation lasted for 24 h. The results showed that supplementing LaCl3 increased the total gas (p < 0.001) production and tended to increase the total VFA production (p = 0.072) and decreased the CH4 production (p = 0.001) and the ratios of acetate/propionate (p = 0.019) and CH4 /total VFA (p < 0.001). Interactions between LaCl3 and NDF were significant in total gas production (p = 0.030) and tended to be significant in CH4 production (p = 0.071). Supplementing LaCl3 at the level of 0.8 mmol/g DM decreased the relative abundance of methanogens and protozoa in the total bacterial 16S rDNA analysed using the real-time PCR (p < 0.0001), increased F. succinogenes (p = 0.0003) and decreased R. flavefaciens (p < 0.0001) whereas did not affect R. albus and anaerobic fungi (p > 0.05). It was concluded that LaCl3 decreased the CH4 production without negatively affecting feed digestion through manipulating rumen microbial flora when feed mixtures with different levels of NDF were used as substrates. PMID:25263819

  18. Plasma lipids and large bowel volatile fatty acids in pigs fed on white rice, brown rice and rice bran.

    PubMed

    Marsono, Y; Illman, R J; Clarke, J M; Trimble, R P; Topping, D L

    1993-09-01

    Adult male pigs were fed on a diet containing (% of energy) fat 25 starch 55 from white rice and providing 20 g fibre/pig d (diet WR). In two other groups rice bran was added to the diet to provide 43 g fibre/d. One group received the diet unmodified (diet RB), but in another (diet RO) heat-stabilized unrefined rice oil replaced the palm oil. In a further group brown rice replaced white rice and provided 37 g fibre/pig per d (diet BR). Plasma cholesterol concentrations were similar with diets WR, RB and BR. With diet RO the concentration was significantly lower than with diets WR and BR but was not different from diet RB. Plasma high-density-lipoprotein-cholesterol and plasma triacylglycerols were unaffected by diet. In all groups, digesta mass rose from the caecum to the proximal colon but fell in the distal colon. Diet WR gave the lowest digesta mass while diet BR gave a significantly higher mass along the large bowel length. RB- and RO-fed pigs had equal masses of digesta which were intermediate between BR- and WR-fed pigs at all sampling sites. Pools of individual and total volatile fatty acids (VFA) in the proximal large bowel were unaffected by diet. Pools of total and individual VFA in the median and distal colon were lowest with diets WR and RB and significantly higher with diet BR. In these regions of the colon pools of acetate in RO-fed pigs did not differ from those in the BR-fed group but were higher than in other groups. However, pools of propionate and butyrate with the RO diet were significantly lower than with diet BR and the same as with diets WR and RB. Portal venous VFA concentrations were unaffected by diet. The higher large bowel digesta masses and VFA with diet BR may reflect the escape of starch from the small intestine. PMID:8260477

  19. Molecular dynamics investigation of separation of hydrogen sulfide from acidic gas mixtures inside metal-doped graphite micropores.

    PubMed

    Huang, Pei-Hsing

    2015-09-21

    The separation of poisonous compounds from various process fluids has long been highly intractable, motivating the present study on the dynamic separation of H2S in acidic-gas-mixture-filled micropores. The molecular dynamics approach, coupled with the isothermal-isochoric ensemble, was used to model the molecular interactions and adsorption of H2S/CO2/CO/H2O mixtures inside metal-doped graphite slits. Due to the difference in the adsorption characteristics between the two distinct adsorbent materials, the metal dopant in the graphitic micropores leads to competitive adsorption, i.e. the Au and graphite walls compete to capture free adsorbates. The effects of competitive adsorption, coupled with changes in the gas temperature, concentration, constituent ratio and slit width on the constituent separation of mixtures were systematically studied. The molecule-wall binding energies calculated in this work (those of H2S, H2O and CO on Au walls and those of H2O, CO and CO2 on graphite walls) show good agreement with those obtained using density functional theory (DFT) and experimental results. The z-directional self-diffusivities (Dz) for adsorbates inside the slit ranged from 10(-9) to 10(-7) m(2) s(-1) as the temperature was increased from 10 to 500 K. The values are comparable with those for a typical microporous fluid (10(-8)-10(-9) m(2) s(-1) in a condensed phase and 10(-6)-10(-7) m(2) s(-1) in the gaseous state). The formation of H-bonding networks and hydrates of H2S is disadvantageous for the separation of mixtures. The results indicate that H2S can be efficiently separated from acidic gas mixtures onto the Au(111) surface by (i) reducing the mole fraction of H2S and H2O in the mixtures, (ii) raising the gas temperature to the high temperature limit (≥400 K), and (iii) lowering the slit width to below the threshold dimension (≤23.26 Å). PMID:26256825

  20. Excess sludge and herbaceous plant co-digestion for volatile fatty acids generation improved by protein and cellulose conversion enhancement.

    PubMed

    Zhang, Dong; Fu, Xiang; Jia, Shuting; Dai, Lingling; Wu, Bing; Dai, Xiaohu

    2016-01-01

    Volatile fatty acids (VFA), the substrate for the bio-methane yield, can be generated from excess sludge or herbaceous plant waste during the anaerobic fermentation process. However, due to the high protein content and the low carbon-to-nitrogen (C/N) ratio of excess sludge, the nutrient utilization of excess sludge to generate VFA and bio-methane usually becomes inefficient and uneconomical. In this study, the laboratory findings showed that both the organic conversion and VFA generation from the mixture of excess sludge and herbaceous plant waste (e.g., the tall fescue was used as model), could be significantly enhanced, especially when the C/N ratio was adjusted to 20/1. In order to get more VFA and bio-methane generation, the effects of different thermal pretreatment strategies on the excess sludge and tall fescue co-fermentation were investigated. The study of thermal pretreatment revealed that the maximal VFA generation (585.2 g COD/kg of total solids (TS)) from the mixture of sludge and tall fescue by thermal pretreatment at 100 °C was almost 9.9 and 4.1 times higher than un-pretreated sole sludge and tall fescue, respectively. Then the mechanism of enhanced VFA generation from the mixture by thermal pretreatment was investigated. It was observed that pretreating the mixture of excess sludge and tall fescue at 100 °C caused the greatest hydrolysis and acidification. The produced VFA was applied to generate the bio-methane, and it was showed that the bio-methane produced from the thermal-pretreated (100 °C) mixture was almost 9.6 and 4.9 times as high as un-pretreated sole sludge and tall fescue, respectively. In addition, the detection of enzyme activities showed that the main enzymes related to cellulose, hemicelluloses, lignin degradation, and acid forming were more active when VFA was produced from the thermal-pretreated (100 °C) mixture than other cases. Class Bacteroidia, class β-Proteobateria, α-Proteobateria, and phylum Firmicutes of the reactor

  1. Extent of sample loss on the sampling device and the resulting experimental biases when collecting volatile fatty acids (VFAs) in air using sorbent tubes.

    PubMed

    Kim, Yong-Hyun; Kim, Ki-Hyun

    2013-08-20

    Not all volatile organic compounds (VOCs) are suitable for sampling from air onto sorbent tubes (ST) with subsequent analysis by thermal desorption (TD) with gas chromatography (GC). Some compounds (such as C2 hydrocarbons) are too volatile for quantitative retention by sorbents at ambient temperature, while others are too reactive - either for storage stability on the tubes (post-sampling) or for thermal desorption/GC analysis. Volatile fatty acids (VFAs) are one of the compound groups that present a challenge to sorbent tube sampling. In this study, we evaluated sample losses on the inner wall surface of the sorbent tube sampler. The sorptive losses of five VFA (acetic, propionic, n-butyric, i-valeric, and n-valeric acid) were tested using two types of tubes (stainless steel and quartz), each packed with three sorbent beds arranged in order of sorbent strength from the sampling end of the tube (Tenax TA, Carbopack B, and Carbopack X). It showed significantly higher losses of VFAs in both liquid phase and vapor phase when using stainless steel tube samplers. These losses were also seen if vapor-phase fatty acids were passed through empty stainless steel tubing and increased dramatically with increasing molecular weight, e.g., losses of 33.6% (acetic acid) to 97.5% (n-valeric acid). Similar losses of VFAs were also observed from headspace sampling of cheese products. Considering that stainless steel sampling tubes are still used extensively by many researchers, their replacement with quartz tubes is recommended to reduce systematic biases in collecting VFA samples or in their calibration. PMID:23869450

  2. Hydrogen sulfide generated by L-cysteine desulfhydrase acts upstream of nitric oxide to modulate abscisic acid-dependent stomatal closure.

    PubMed

    Scuffi, Denise; Álvarez, Consolación; Laspina, Natalia; Gotor, Cecilia; Lamattina, Lorenzo; García-Mata, Carlos

    2014-12-01

    Abscisic acid (ABA) is a well-studied regulator of stomatal movement. Hydrogen sulfide (H2S), a small signaling gas molecule involved in key physiological processes in mammals, has been recently reported as a new component of the ABA signaling network in stomatal guard cells. In Arabidopsis (Arabidopsis thaliana), H2S is enzymatically produced in the cytosol through the activity of l-cysteine desulfhydrase (DES1). In this work, we used DES1 knockout Arabidopsis mutant plants (des1) to study the participation of DES1 in the cross talk between H2S and nitric oxide (NO) in the ABA-dependent signaling network in guard cells. The results show that ABA did not close the stomata in isolated epidermal strips of des1 mutants, an effect that was restored by the application of exogenous H2S. Quantitative reverse transcription polymerase chain reaction analysis demonstrated that ABA induces DES1 expression in guard cell-enriched RNA extracts from wild-type Arabidopsis plants. Furthermore, stomata from isolated epidermal strips of Arabidopsis ABA receptor mutant pyrabactin-resistant1 (pyr1)/pyrabactin-like1 (pyl1)/pyl2/pyl4 close in response to exogenous H2S, suggesting that this gasotransmitter is acting downstream, although acting independently of the ABA receptor cannot be ruled out with this data. However, the Arabidopsis clade-A PROTEIN PHOSPHATASE2C mutant abscisic acid-insensitive1 (abi1-1) does not close the stomata when epidermal strips were treated with H2S, suggesting that H2S required a functional ABI1. Further studies to unravel the cross talk between H2S and NO indicate that (1) H2S promotes NO production, (2) DES1 is required for ABA-dependent NO production, and (3) NO is downstream of H2S in ABA-induced stomatal closure. Altogether, data indicate that DES1 is a unique component of ABA signaling in guard cells. PMID:25266633

  3. Hydrogen Sulfide Generated by l-Cysteine Desulfhydrase Acts Upstream of Nitric Oxide to Modulate Abscisic Acid-Dependent Stomatal Closure1[C][W

    PubMed Central

    Scuffi, Denise; Álvarez, Consolación; Laspina, Natalia; Gotor, Cecilia; Lamattina, Lorenzo; García-Mata, Carlos

    2014-01-01

    Abscisic acid (ABA) is a well-studied regulator of stomatal movement. Hydrogen sulfide (H2S), a small signaling gas molecule involved in key physiological processes in mammals, has been recently reported as a new component of the ABA signaling network in stomatal guard cells. In Arabidopsis (Arabidopsis thaliana), H2S is enzymatically produced in the cytosol through the activity of l-cysteine desulfhydrase (DES1). In this work, we used DES1 knockout Arabidopsis mutant plants (des1) to study the participation of DES1 in the cross talk between H2S and nitric oxide (NO) in the ABA-dependent signaling network in guard cells. The results show that ABA did not close the stomata in isolated epidermal strips of des1 mutants, an effect that was restored by the application of exogenous H2S. Quantitative reverse transcription polymerase chain reaction analysis demonstrated that ABA induces DES1 expression in guard cell-enriched RNA extracts from wild-type Arabidopsis plants. Furthermore, stomata from isolated epidermal strips of Arabidopsis ABA receptor mutant pyrabactin-resistant1 (pyr1)/pyrabactin-like1 (pyl1)/pyl2/pyl4 close in response to exogenous H2S, suggesting that this gasotransmitter is acting downstream, although acting independently of the ABA receptor cannot be ruled out with this data. However, the Arabidopsis clade-A PROTEIN PHOSPHATASE2C mutant abscisic acid-insensitive1 (abi1-1) does not close the stomata when epidermal strips were treated with H2S, suggesting that H2S required a functional ABI1. Further studies to unravel the cross talk between H2S and NO indicate that (1) H2S promotes NO production, (2) DES1 is required for ABA-dependent NO production, and (3) NO is downstream of H2S in ABA-induced stomatal closure. Altogether, data indicate that DES1 is a unique component of ABA signaling in guard cells. PMID:25266633

  4. Volatile Metabolites

    PubMed Central

    Rowan, Daryl D.

    2011-01-01

    Volatile organic compounds (volatiles) comprise a chemically diverse class of low molecular weight organic compounds having an appreciable vapor pressure under ambient conditions. Volatiles produced by plants attract pollinators and seed dispersers, and provide defense against pests and pathogens. For insects, volatiles may act as pheromones directing social behavior or as cues for finding hosts or prey. For humans, volatiles are important as flavorants and as possible disease biomarkers. The marine environment is also a major source of halogenated and sulfur-containing volatiles which participate in the global cycling of these elements. While volatile analysis commonly measures a rather restricted set of analytes, the diverse and extreme physical properties of volatiles provide unique analytical challenges. Volatiles constitute only a small proportion of the total number of metabolites produced by living organisms, however, because of their roles as signaling molecules (semiochemicals) both within and between organisms, accurately measuring and determining the roles of these compounds is crucial to an integrated understanding of living systems. This review summarizes recent developments in volatile research from a metabolomics perspective with a focus on the role of recent technical innovation in developing new areas of volatile research and expanding the range of ecological interactions which may be mediated by volatile organic metabolites. PMID:24957243

  5. Propagated fixed-bed mixed-acid fermentation: effect of volatile solid loading rate and agitation at near-neutral pH.

    PubMed

    Golub, Kristina W; Golub, Stacey R; Meysing, Daniel M; Holtzapple, Mark T

    2012-11-01

    To increase conversion and product concentration, mixed-acid fermentation can use a countercurrent strategy where solids and liquids pass in opposite directions through a series of fermentors. To limit the requirement for moving solids, this study employed a propagated fixed-bed fermentation, where solids were stationary and only liquid was transferred. To evaluate the role of agitation, continuous mixing was compared with periodic mixing. The periodically mixed fermentation had similar conversion, but lower yield and selectivity. Increasing volatile solid loading rate from 1.5 to 5.1g non-acid volatile solids/(L(liq)·d) and increasing liquid retention time decreased yield, conversion, selectivity, but increased product concentrations. Compared to a previous study at high pH (~9), this study achieved higher performance at near neutral pH (~6.5) and optimal C-N ratios. Compared to countercurrent fermentation, propagated fixed-bed fermentations have similar selectivities and produce similar proportions of acetic acid, but have lower yields, conversion, productivities, and acid concentrations. PMID:22995159

  6. Deodorization of garlic breath volatiles by food and food components.

    PubMed

    Munch, Ryan; Barringer, Sheryl A

    2014-04-01

    The ability of foods and beverages to reduce allyl methyl disulfide, diallyl disulfide, allyl mercaptan, and allyl methyl sulfide on human breath after consumption of raw garlic was examined. The treatments were consumed immediately following raw garlic consumption for breath measurements, or were blended with garlic prior to headspace measurements. Measurements were done using a selected ion flow tube-mass spectrometer. Chlorophyllin treatment demonstrated no deodorization in comparison to the control. Successful treatments may be due to enzymatic, polyphenolic, or acid deodorization. Enzymatic deodorization involved oxidation of polyphenolic compounds by enzymes, with the oxidized polyphenols causing deodorization. This was the probable mechanism in raw apple, parsley, spinach, and mint treatments. Polyphenolic deodorization involved deodorization by polyphenolic compounds without enzymatic activity. This probably occurred for microwaved apple, green tea, and lemon juice treatments. When pH is below 3.6, the enzyme alliinase is inactivated, which causes a reduction in volatile formation. This was demonstrated in pH-adjusted headspace measurements. However, the mechanism for volatile reduction on human breath (after volatile formation) is unclear, and may have occurred in soft drink and lemon juice breath treatments. Whey protein was not an effective garlic breath deodorant and had no enzymatic activity, polyphenolic compounds, or acidity. Headspace concentrations did not correlate well to breath treatments. PMID:24592995

  7. Tetracycline removal and effect on the formation and degradation of extracellular polymeric substances and volatile fatty acids in the process of hydrogen fermentation.

    PubMed

    Hou, Guangying; Hao, Xiaoyan; Zhang, Rui; Wang, Jing; Liu, Rutao; Liu, Chunguang

    2016-07-01

    Many research indicate antibiotics show adverse effect on methane fermentation, while few research focus on their effect on hydrogen fermentation. The present study aimed to gain insight of the effect of antibiotics on hydrogen fermentation with waste sludge and corn straw as substrate. For this purpose, tetracycline, as a model, was investigated with regard to tetracycline removal, hydrogen production, interaction with extracellular polymeric substances (EPSs) of substrate and volatile fatty acids (VFAs) on concentration and composition. Results show that tetracycline could be removed efficiently by hydrogen fermentation, and relative low-dose tetracycline (200mg/l) exposure affects little on hydrogen production. While tetracycline exposure could change hydrogen fermentation from butyric acid-type to propionic acid-type depending on tetracycline level. Based upon three-dimensional excitation-emission matrix fluorescence spectroscopy and UV-vis tetracycline changed the component and content of EPSs, and static quenching was the main mechanism between EPSs with tetracycline. PMID:27070285

  8. Effect of polyvinyl alcohol hydrogel as a biocarrier on volatile fatty acids production of a two-stage thermophilic anaerobic membrane bioreactor.

    PubMed

    Chaikasem, Supawat; Abeynayaka, Amila; Visvanathan, Chettiyappan

    2014-09-01

    This work studied the effect of polyvinyl alcohol hydrogel (PVA-gel) beads, as an effective biocarrier for volatile fatty acid (VFA) production in hydrolytic reactor of a two-stage thermophilic anaerobic membrane bioreactor (TAnMBR). The two-stage TAnMBR, treating synthetic high strength particulate wastewater with influent chemical oxygen demand (COD) [16.4±0.8 g/L], was operated at 55 °C. Under steady state conditions, the reactor was operated at an organic loading rate of 8.2±0.4 kg COD/m(3) d. Operational performance of the system was monitored by assessing VFA composition and quantity, methane production and COD removal efficiency. Increment of VFA production was observed with PVA-gel addition. Hydrolytic effluent contained large amount of acetic acid and n-butyric acid. However, increase in VFA production adversely affected the methanogenic reactor performance due to lack of methanogenic archaea. PMID:24803272

  9. Production of medium-chain volatile fatty acids by mixed ruminal microorganisms is enhanced by ethanol in co-culture with Clostridium kluyveri.

    PubMed

    Weimer, Paul J; Nerdahl, Michael; Brandl, Dane J

    2015-01-01

    Mixed bacterial communities from the rumen ferment cellulosic biomass primarily to C2-C4 volatile fatty acids, and perform only limited chain extension to produce C5 (valeric) and C6 (caproic) acids. The aim of this study was to increase production of caproate and valerate in short-term in vitro incubations. Co-culture of mixed ruminal microbes with a rumen-derived strain of the bacterium Clostridium kluyveri converted cellulosic biomass (alfalfa stems or switchgrass herbage) plus ethanol to VFA mixtures that include valeric and caproic acids as the major fermentation products over a 48-72h run time. Concentrations of caproate reached 6.1gL(-1), similar to or greater than those reported in most conventional carboxylate fermentations that employ substantially longer run times. PMID:25459809

  10. A ground electromagnetic survey used to map sulfides and acid sulfate ground waters at the abandoned Cabin Branch Mine, Prince William Forest Park, northern Virginia gold-pyrite belt

    USGS Publications Warehouse

    Wynn, Jeffrey C.

    2000-01-01

    INTRODUCTION AND BACKGROUND: Prince William Forest Park is situated at the northeastern end of the Virginia Gold-Pyrite belt northwest of the town of Dumfries, VA. The U. S. Marine Corps Reservation at Quantico borders the park on the west and south, and occupies part of the same watershed. Two abandoned mines are found within the park: the Cabin Branch pyrite mine, a historic source of acid mine drainage, and the Greenwood gold mine, a source of mercury contamination. Both are within the watershed of Quantico Creek (Fig.1). The Cabin Branch mine (also known as the Dumfries mine) lies about 2.4 km northwest of the town of Dumfries. It exploited a 300 meter-long, lens-shaped body of massive sulfide ore hosted by metamorphosed volcanic rocks; during its history over 200,000 tons of ore were extracted and processed locally. The site became part of the National Capitol Region of the National Park Service in 1940 and is currently managed by the National Park Service. In 1995 the National Park Service, in cooperation with the Virginia Department of Mines, Minerals, and Energy reclaimed the Cabin Branch site. The Virginia Gold-Pyrite belt, also known as the central Virginia volcanic-plutonic belt, is host to numerous abandoned metal mines (Pavlides and others, 1982), including the Cabin Branch deposit. The belt itself extends from its northern terminus near Cabin Branch, about 50 km south of Washington, D.C., approximately 175 km to the southwest into central Virginia. It is underlain by metamorphosed volcanic and clastic (non-carbonate) sedimentary rocks, originally deposited approximately 460 million years ago during the Ordovician Period (Horton and others, 1998). Three kinds of deposits are found in the belt: volcanic-associated massive sulfide deposits, low-sulfide quartz-gold vein deposits, and gold placer deposits. The massive sulfide deposits such as Cabin Branch were historically mined for their sulfur, copper, zinc, and lead contents, but also yielded byproduct

  11. Solid Phase Micro-extraction (SPME) with In Situ Transesterification: An Easy Method for the Detection of Non-volatile Fatty Acid Derivatives on the Insect Cuticle.

    PubMed

    Kühbandner, Stephan; Ruther, Joachim

    2015-06-01

    Triacylglycerides (TAGs) and other non-volatile fatty acid derivatives (NFADs) occur in large amounts in the internal tissues of insects, but their presence on the insect cuticle is controversially discussed. Most studies investigating cuticular lipids of insects involve solvent extraction, which implies the risk of extracting lipids from internal tissues. Here, we present a new method that overcomes this problem. The method employs solid phase micro-extraction (SPME) to sample NFADs by rubbing the SPME fiber over the insect cuticle. Subsequently, the sampled NFADs are transesterified in situ with trimethyl sulfonium hydroxide (TMSH) into more volatile fatty acid methyl esters (FAMEs), which can be analyzed by standard GC/MS. We performed two types of control experiments to enable significant conclusions: (1) to rule out contamination of the GC/MS system with NFADs, and (2) to exclude the presence of free fatty acids on the insect cuticle, which would also furnish FAMEs after TMSH treatment, and thus might simulate the presence of NFADs. In combination with these two essential control experiments, the described SPME technique can be used to detect TAGs and/or other NFADs on the insect cuticle. We analyzed six insect species from four insect orders with our method and compared the results with conventional solvent extraction followed by ex situ transesterification. Several fatty acids typically found as constituents of TAGs were detected by the SPME method on the cuticle of all species analyzed. A comparison of the two methods revealed differences in the fatty acid compositions of the samples. Saturated fatty acids showed by trend higher relative abundances when sampled with the SPME method, while several minor FAMEs were detected only in the solvent extracts. Our study suggests that TAGs and maybe other NFADs are far more common on the insect cuticle than usually thought. PMID:26025161

  12. Effect of calcium chloride on abating inhibition due to volatile fatty acids during the start-up period in anaerobic digestion of municipal solid waste.

    PubMed

    Kumar, Sunil; Das, Avijit; Srinivas, G Lohit Kumar; Dhar, Hiya; Ojha, Vivek Kumar; Wong, Jonathan

    2016-01-01

    Biomethanation of municipal solid waste (MSW) is a slow process and the yield of biogas is usually low. The present study was carried out to examine the effect of calcium chloride (CaCl2) on anaerobic digestion of MSW. Three anaerobic digesters with different concentrations of CaCl2, namely sample without additives (Control), sample with 2.5 g/L CaCl2 (R1) and sample with 5 g/L CaCl2 (R2) were studied separately and the significant results are presented. From the experimental results, it was observed that pH decreased with an increase in the dosage of CaCl2. Total solids and volatile solids reduction percentage in digester R2 was considerably lower than Control and R1 digesters. The significant positive correlation with small increments in volatile solids and chemical oxygen demand (COD) reduction were observed with an increase in pH. The cumulative biogas production in all the three digesters (Control, R1 and R2) were observed to be 35.38, 46.46 and 37.56 L, respectively. It was also observed that the volatile fatty acids (VFAs) removal efficiency in digester R1 was the best among all the three digesters. A comparison of the effluent characteristics revealed improvement in the overall performance of the digester R1 amended with 2.5 g/L CaCl2 over the other two digesters. PMID:26609893

  13. EMI-Sensor Data to Identify Areas for Potential Emissions of Volatile Fatty Acids from Feedlot Surfaces

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Remote sensing methods have been developed to measure manure accumulation patterns on feedlot surfaces. This study was designed to determine if this sensor data could be used to predict differences in volatile fermentation products and the areas in the pens where they are produced following a rain...

  14. Tomato aromatic amino acid decarboxylases participate in synthesis of the flavor volatiles 2-phenylethanol and 2-phenylacetaldehyde

    PubMed Central

    Tieman, Denise; Taylor, Mark; Schauer, Nicolas; Fernie, Alisdair R.; Hanson, Andrew D.; Klee, Harry J.

    2006-01-01

    An important phenylalanine-derived volatile compound produced by plants is 2-phenylethanol. It is a major contributor to flavor in many foods, including fresh fruits, such as tomato, and an insect-attracting scent in roses and many other flowers. Despite the centrality of 2-phenylethanol to flavor and fragrance, the plant genes responsible for its synthesis have not been identified. Here, we describe a biosynthetic pathway for 2-phenylethanol and other phenylalanine-derived volatiles in tomato fruits and a small family of decarboxylases (LeAADC1A, LeAADC1B, and LeAADC2) that can mediate that pathway's first step. These enzymes each catalyze conversion of phenylalanine to phenethylamine and tyrosine to tyramine. Although tyrosine is the preferred substrate in vitro, phenylalanine levels in tomato fruits far exceed those of tyrosine, indicating that phenylalanine is a physiological substrate. Consistent with this view, overexpression of either LeAADC1A or LeAADC2 in transgenic tomato plants resulted in fruits with up to 10-fold increased emissions of the products of the pathway, including 2-phenylacetaldehyde, 2-phenylethanol, and 1-nitro-2-phenylethane. Further, antisense reduction of LeAADC2 significantly reduced emissions of these volatiles. Besides establishing a biosynthetic route, these results show that it is possible to change phenylalanine-based flavor and aroma volatiles in plants by manipulating expression of a single gene. PMID:16698923

  15. Evaluation of sampling methods for measuring exposure to volatile inorganic acids in workplace air. Part 1: sampling hydrochloric acid (HCl) and nitric acid (HNO₃) from a test gas atmosphere.

    PubMed

    Howe, Alan; Musgrove, Darren; Breuer, Dietmar; Gusbeth, Krista; Moritz, Andreas; Demange, Martine; Oury, Véronique; Rousset, Davy; Dorotte, Michel

    2011-08-01

    Historically, workplace exposure to the volatile inorganic acids hydrochloric acid (HCl) and nitric acid (HNO(3)) has been determined mostly by collection on silica gel sorbent tubes and analysis of the corresponding anions by ion chromatography (IC). However, HCl and HNO(3) can be present in workplace air in the form of mist as well as vapor, so it is important to sample the inhalable fraction of airborne particles. As sorbent tubes exhibit a low sampling efficiency for inhalable particles, a more suitable method was required. This is the first of two articles on "Evaluation of Sampling Methods for Measuring Exposure to Volatile Inorganic Acids in Workplace Air" and describes collaborative sampling exercises carried out to evaluate an alternative method for sampling HCl and HNO(3) using sodium carbonate-impregnated filters. The second article describes sampling capacity and breakthrough tests. The method was found to perform well and a quartz fiber filter impregnated with 500 μL of 1 M Na(2)CO(3) (10% (m/v) Na(2)CO(3)) was found to have sufficient sampling capacity for use in workplace air measurement. A pre-filter is required to remove particulate chlorides and nitrates that when present would otherwise result in a positive interference. A GSP sampler fitted with a plastic cone, a closed face cassette, or a plastic IOM sampler were all found to be suitable for mounting the pre-filter and sampling filter(s), but care has to be taken with the IOM sampler to ensure that the sampler is tightly closed to avoid leaks. HCl and HNO(3) can react with co-sampled particulate matter on the pre-filter, e.g., zinc oxide, leading to low results, and stronger acids can react with particulate chlorides and nitrates removed by the pre-filter to liberate HCl and HNO(3), which are subsequently collected on the sampling filter, leading to high results. However, although there is this potential for both positive and negative interferences in the measurement, these are unavoidable

  16. DISSOLUTION OF PLUTONIUM CONTAINING CARRIER PRECIPITATE BY CARBONATE METATHESIS AND SEPARATION OF SULFIDE IMPURITIES THEREFROM BY SULFIDE PRECIPITATION

    DOEpatents

    Duffield, R.B.

    1959-07-14

    A process is described for recovering plutonium from foreign products wherein a carrier precipitate of lanthanum fluoride containing plutonium is obtained and includes the steps of dissolving the carrier precipitate in an alkali metal carbonate solution, adding a soluble sulfide, separating the sulfide precipitate, adding an alkali metal hydroxide, separating the resulting precipitate, washing, and dissolving in a strong acid.

  17. Formation of Zn- and Fe-sulfides near hydrothermal vents at the Eastern Lau Spreading Center: implications for sulfide bioavailability to chemoautotrophs

    PubMed Central

    Hsu-Kim, Heileen; Mullaugh, Katherine M; Tsang, Jeffrey J; Yucel, Mustafa; Luther, George W

    2008-01-01

    Background The speciation of dissolved sulfide in the water immediately surrounding deep-ocean hydrothermal vents is critical to chemoautotrophic organisms that are the primary producers of these ecosystems. The objective of this research was to identify the role of Zn and Fe for controlling the speciation of sulfide in the hydrothermal vent fields at the Eastern Lau Spreading Center (ELSC) in the southern Pacific Ocean. Compared to other well-studied hydrothermal systems in the Pacific, the ELSC is notable for unique ridge characteristics and gradients over short distances along the north-south ridge axis. Results In June 2005, diffuse-flow (< 50°C) and high-temperature (> 250°C) vent fluids were collected from four field sites along the ELSC ridge axis. Total and filtered Zn and Fe concentrations were quantified in the vent fluid samples using voltammetric and spectrometric analyses. The results indicated north-to-south variability in vent fluid composition. In the high temperature vent fluids, the ratio of total Fe to total Zn varied from 39 at Kilo Moana, the most northern site, to less than 7 at the other three sites. The concentrations of total Zn, Fe, and acid-volatile sulfide indicated that oversaturation and precipitation of sphalerite (ZnS(s)) and pyrite (FeS2(s)) were possible during cooling of the vent fluids as they mixed with the surrounding seawater. In contrast, most samples were undersaturated with respect to mackinawite (FeS(s)). The reactivity of Zn(II) in the filtered samples was tested by adding Cu(II) to the samples to induce metal-exchange reactions. In a portion of the samples, the concentration of labile Zn2+ increased after the addition of Cu(II), indicating the presence of strongly-bound Zn(II) species such as ZnS clusters and nanoparticles. Conclusion Results of this study suggest that Zn is important to sulfide speciation at ELSC vent habitats, particularly at the southern sites where Zn concentrations increase relative to Fe. As the

  18. Regeneration of carboxylic acid-laden basic sorbents by leaching with a volatile base in an organic solvent

    DOEpatents

    King, C. Judson; Husson, Scott M.

    1999-01-01

    Carboxylic acids are sorbed from aqueous feedstocks onto a solid adsorbent. The acids are freed from the sorbent phase by treating it with an organic solution of alkylamine thus forming an alkylamine/carboxylic acid complex which is decomposed with improved efficiency to the desired carboxylic acid and the alkylamine. Carbon dioxide addition can be used to improve the adsorption or the carboxylic acids by the solid phase sorbent.

  19. MEASURING METAL SULFIDE COMPLEXES IN OXIC RIVER WATERS WITH SQUARE WAVE VOLTAMMETRY. (R825395)

    EPA Science Inventory

    A sulfide identification protocol was developed to quantify specific metal
    sulfides that could exist in river water. Using a series of acid additions,
    nitrogen purges, and voltammetric analyses, metal sulfides were identified and
    semiquantified in three specific gr...

  20. Effects of volatile fatty acids, ammonium and agitation on thermophilic methane production from biogas plant sludge in lab-scale experiments.

    PubMed

    Lins, Philipp; Illmer, Paul

    2012-07-01

    The effects of different volatile fatty acids (VFA, formate, acetate, propionate and butyrate), ammonium (NH (4) (+)) and agitation on methane (CH(4)) production were determined in 120-mL serum bottles. We showed that the addition of formate did not lead to an inhibition of methanogenesis until a concentration of 120 mmol/L. A complete inhibition of methanogenesis was detected in variants containing 360 mmol/L formate or propionate until day 3 but the production started afterwards within next 2 days. This might indicate a kind of adaptation to the higher volatile fatty acid concentrations. Increasing NH (4) (+) concentrations led to higher initial CH(4) production, with an optimum at 120 mmol/L. The addition of 720 mmol/L NH (4) (+) led to a complete inhibition until day 3; subsequently, CH(4) production started again on day 5 though it was still significantly lower compared to the other variants. Finally, also the speed of agitation showed significant effects on methanogenesis. The CH(4) production from complex carbon sources was most favourable at a moderate agitation of 150 rpm of the lab-scale serum bottles. A lower or higher speed brought about a distinct reduction of CH(4) production. PMID:22588621

  1. The profile of volatile compounds in the outer and inner parts of broiled pork neck is strongly influenced by the acetic-acid marination conditions.

    PubMed

    Biller, Elżbieta; Boselli, Emanuele; Obiedziński, Mieczysław; Karpiński, Piotr; Waszkiewicz-Robak, Bożena

    2016-11-01

    Raw pork neck cutlets were marinated in an aqueous solution of acetic acid (pH4, 24h, 4°C) without (M) or with 1% (w/w) of glucose. The control (K) was formed by non-treated raw pork neck. The cutlets were then broiled (185°C, 30min). In all K cutlets, significant higher amounts of volatile compounds (VCs) were developed after broiling than the other samples. Significant more aldehydes and alcohols were present in the inner parts than in the surface. The correlation between surface and internal layers was high only for aldehydes. Marinating decreased the differences among VCs and led to the standardization of the processed meat. The addition of glucose to the marinade led to more volatile aldehydes, carboxylic acids, esters, furan, pyran, pyrazine, pyrrol and pyridine derivatives than in M samples. Several (53) specific VCs explained the differences among the surface samples related to the marinating process. However, only 16 VCs explained the variance among the inner parts. PMID:27395822

  2. Photosynthetic mixed culture polyhydroxyalkanoate (PHA) production from individual and mixed volatile fatty acids (VFAs): substrate preferences and co-substrate uptake.

    PubMed

    Fradinho, J C; Oehmen, A; Reis, M A M

    2014-09-20

    This work studied the effect of the substrate feeding composition on the polyhydroxyalkanoate (PHA) accumulation capacity of an acetate enriched photosynthetic mixed culture (PMC). From the six tested organic acids - malate, citrate, lactate, acetate, propionate and butyrate - only the three volatile fatty acids (VFAs) enabled PHA production, with acetate and butyrate leading to polyhydroxybutyrate (PHB) formation and propionate leading to a HB:HV copolymer with a 51% fraction of hydroxyvalerate (HV). Also, results showed an acceleration of butyrate and propionate consumption when fed in the presence of acetate, suggesting that the latter can act as a co-substrate for butyrate and propionate uptake. Furthermore, results suggest that some PMC bacterial groups present a substrate preference for butyrate in relation to acetate and propionate. These findings indicate the possibility of feeding the PMC with cheap VFA rich fermented wastes, leading to a more cost-effective and environmentally sustainable PHA production system. PMID:24915131

  3. Lipid production by microalgae Chlorella protothecoides with volatile fatty acids (VFAs) as carbon sources in heterotrophic cultivation and its economic assessment.

    PubMed

    Fei, Qiang; Fu, Rongzhan; Shang, Longan; Brigham, Christopher J; Chang, Ho Nam

    2015-04-01

    Volatile fatty acids (VFAs) that can be derived from food wastes were used for microbial lipid production by Chlorella protothecoides in heterotrophic cultures. The usage of VFAs as carbon sources for lipid accumulation was investigated in batch cultures. Culture medium, culture temperature, and nitrogen sources were explored for lipid production in the heterotrophic cultivation. The concentration and the ratio of VFAs exhibited significant influence on cell growth and lipid accumulation. The highest lipid yield coefficient and lipid content of C. protothecoides grown on VFAs were 0.187 g/g and 48.7%, respectively. The lipid content and fatty acids produced using VFAs as carbon sources were similar to those seen on growth and production using glucose. The techno-economic analysis indicates that the biodiesel derived from the lipids produced by heterotrophic C. protothecoides with VFAs as carbon sources is very promising and competitive with other biofuels and fossil fuels. PMID:25332127

  4. A solid-phase microextraction chamber method for analysis of manure volatiles.

    PubMed

    Miller, Daniel N; Woodbury, Bryan L

    2006-01-01

    Odors from livestock operations are a complex mixture of volatile carbon, sulfur, and nitrogen compounds. Currently, detailed volatiles analysis is both time consuming and requires specialized equipment and methods. This work describes a new method that utilizes a dynamic flux chamber, solid-phase microextraction (SPME), and gas chromatography-mass spectroscopy (GC-MS) to describe and compare the odorous compounds emitted from cattle and swine feces. Evaluation of method parameters produced a protocol for comparing relative emissions based on fixed sample temperature (20 degrees C) and exposed surface area (approximately 523 cm(2)), air flow rates (1 L min(-1) or 16 cm s(-1)), SPME exposure time (5 min), and chamber cleaning procedures (70% ethanol rinse and drying for 30 min at 105 degrees C) to minimize cross-contamination between samples. A variety of volatile organic compounds (VOCs) including alcohols, volatile fatty acids, aromatic ring compounds, ketones, esters, and sulfides were routinely detected and the relative emissions from fresh and incubated (37 degrees C overnight) swine and cattle feces were compared as a measure of potential to produce odorants during manure storage. Differences in the types and relative quantities of volatiles emitted were detected when animal species (cattle or swine), diet, fecal incubation, or sample storage conditions (20, 4, or -20 degrees C) were varied. PMID:17071909

  5. Fermentation of alfalfa wet-fractionation liquids to volatile fatty acids by Streptococcus bovis and Megasphaera elsdenii

    Technology Transfer Automated Retrieval System (TEKTRAN)

    A “green juice”, obtained by squeezing freshly harvested alfalfa leaves amended with a commercial lactic acid bacterial inoculant, was readily fermented by 7- to 21-d incubation at room temperature to obtain lactic acid at concentrations of 12-46 g l-1, along with additional acetic and succinic acid...

  6. Effects of steam-treated rice straw feeding on growth, digestibility, and plasma volatile fatty acids of goats under different housing systems.

    PubMed

    Muhammad, Naeem; Nasir, Rajput; Li, Dong; Lili, Zhang; Tian, Wang

    2014-12-01

    In order to use rice straw as forage in livestock feeding, the effects of steam-treated rice straw (at 15.5 kgf/cm(2) for 120 s) feeding on growth performance, plasma volatile fatty acid profile, and nutrient digestibility of goats were determined. Twenty male goats (18.69 ± 0.34 kg) were used in an 84-day trial. The goats were divided into four groups of five goats each to receive steam-treated (STRS) or untreated (UTRS) rice straw diet under closed house (CH) and open house (OH) systems. The results revealed that the goats fed with STRS had significantly higher dry matter (DM), organic matter (OM), crude protein (CP), neutral detergent fiber (NDF), and acid detergent fiber (ADF) digestibility; similarly, the average daily weight gain and feed conversion ratio were higher for STRS groups under both CH and OH systems than those for UTRS. The plasma protein and insulin in STRS and cholesterol in UTRS groups was higher (P < 0.05) at 60 days but found not different (P > 0.05) at 30 days. The plasma amylase, lipase, T3, T4 and glucagon at 30 and 60 days were not different (P > 0.05) among the groups. The plasma acetate, propionate, butyrate, and total volatile fatty acid were higher (P < 0.05) in STRS groups at 30 and 60 days. The housing conditions had no effects (P > 0.05) on these parameters. It could be concluded that steam treatment of rice straw at 15.5 kgf/cm(2) for 120 s increased apparent nutrient digestibility, hence increased the growth and feed efficiency of growing goats. PMID:25277493

  7. Sulfide clean-up of solutions from heavy metal ions

    SciTech Connect

    Kislinskaya, G.E.; Kozachek, N.N.; Krasnova, G.M.; Shenk, N.I.

    1982-09-20

    The object of the present research was to determine the conditions for thorough clean-up of solutions from cadmium or mercury contamination by use of iron sulfide. Results indicated that the shape of the dependence of the degree of extraction of copper with iron sulfide on the pH value is analogous to the curve for cadmium; that is, copper, like cadmium, is precipitated by chemical reaction. In distinction from cadmium and copper, mercury is extracted by iron sulfide both in acid and also in neutral solutions, that is, it is possible to attain a direct ion exchange by reaction. At high pH values, only small amounts of iron go into solution, therefore FeS can be used very rationally for the extraction of both small (about 1 mg/liter), and also of large (about 1 mg/liter) amounts of mercury from solutions, which are nearly neutral. By adding sodium sulfide and a flocculant, one can accelerate the process of mercury precipitation, and also reduce the solution of iron sulfide. In the present case, iron sulfide plays the role of a substrate for the crystallization of mercury sulfide, since in dilute solutions the latter forms poorly filterable colloidal solutions. Thus when one uses fused iron sulfide with addition of sodium sulfide, a high degree of mercury extraction is attained, and the spent sorbent is filtered well.

  8. Hydrolysis-acidogenesis of food waste in solid-liquid-separating continuous stirred tank reactor (SLS-CSTR) for volatile organic acid production.

    PubMed

    Karthikeyan, Obulisamy Parthiba; Selvam, Ammaiyappan; Wong, Jonathan W C

    2016-01-01

    The use of conventional continuous stirred tank reactor (CSTR) can affect the methane (CH4) recovery in a two-stage anaerobic digestion of food waste (FW) due to carbon short circuiting in the hydrolysis-acidogenesis (Hy-Aci) stage. In this research, we have designed and tested a solid-liquid-separating CSTR (SLS-CSTR) for effective Hy-Aci of FW. The working conditions were pH 6 and 9 (SLS-CSTR-1 and -2, respectively); temperature-37°C; agitation-300rpm; and organic loading rate (OLR)-2gVSL(-1)day(-1). The volatile fatty acids (VFA), enzyme activities and bacterial population (by qPCR) were determined as test parameters. Results showed that the Hy-Aci of FW at pH 9 produced ∼35% excess VFA as compared to that at pH 6, with acetic and butyric acids as major precursors, which correlated with the high enzyme activities and low lactic acid bacteria. The design provided efficient solid-liquid separation there by improved the organic acid yields from FW. PMID:26512860

  9. Microbial conversion of inorganic carbon to dimethyl sulfide in anoxic lake sediment (Plußsee, Germany)

    NASA Astrophysics Data System (ADS)

    Lin, Y.-S.; Heuer, V. B.; Ferdelman, T. G.; Hinrichs, K.-U.

    2010-04-01

    In anoxic environments, volatile methylated sulfides including methanethiol (MT) and dimethyl sulfide (DMS) link the pools of inorganic and organic carbon with the sulfur cycle. However, direct formation of methylated sulfides from reduction of dissolved inorganic carbon has previously not been demonstrated. During examination of the hydrogenotrophic microbial activity at different temperatures in the anoxic sediment from Lake Plußsee, DMS formation was detected at 55 °C and was enhanced when bicarbonate was supplemented. Addition of both bicarbonate and H2 resulted in the strongest stimulation of DMS production, and MT levels declined slightly. Addition of methyl-group donors such as methanol and syringic acid or methyl-group acceptors such as hydrogen sulfide did not enhance further accumulation of DMS and MT. The addition of 2-bromoethanesulfonate inhibited DMS formation and caused a slight MT accumulation. MT and DMS had average δ13C values of -55‰ and -62‰, respectively. Labeling with NaH13CO3 showed that incorporation of bicarbonate into DMS occurred through methylation of MT. H235S labeling demonstrated a microbially-mediated, but slow, process of hydrogen sulfide methylation that accounted for <10% of the accumulation rates of DMS. Our data suggest: (1) methanogens are involved in DMS formation from bicarbonate, and (2) the major source of the 13C-depleted MT is neither bicarbonate nor methoxylated aromatic compounds. Other possibilities for isotopically light MT, such as demethylation of 13C-depleted DMS or other organic precursors such as methionine, are discussed. This DMS-forming pathway may be relevant for anoxic environments, such as hydrothermally influenced sediments and fluids and sulfate-methane transition zones in marine sediments.

  10. Evidence supporting biologically mediated sulfide oxidation in hot spring ecosystems

    NASA Astrophysics Data System (ADS)

    Cox, A. D.; Shock, E.

    2011-12-01

    The sulfide concentration of fluids in hydrothermal ecosystems is one of several factors determining the transition to microbial photosynthesis (Cox et al., 2011, Chem. Geol. 280, 344-351). To investigate the loss of sulfide in Yellowstone hot spring systems, measurements of total dissolved sulfide with respect to time were made in incubation experiments conducted on 0.2-micron filtered (killed controls) vs. unfiltered hot spring water at locations with three different pH:sulfide combinations (pH 2.5 with 50 μM sulfide, 5.2 with 5.6 μM sulfide, and 8.3 with 86 μM sulfide). At the higher pH values, the experiments yielded similar rates of sulfide loss in filtered and unfiltered water of approximately 0.8 (pH 5.2) and 7.6 nmol sulfide L-1s-1 (pH 8.3). At the acidic spring, the unfiltered water lost sulfide at a rate 1.6 times that of the filtered water (8.2 vs. 5 nmol sulfide L-1s-1). These results suggest that the pelagic biomass at the pH 5.2 and 8.3 springs may not affect sulfide loss, whereas in the pH 2.5 spring there appears to be an effect. In addition, the incubation of filamentous biomass with unfiltered water increased the rate of sulfide loss by approximately two-fold at a pH of 2.5 (59 vs. 31 nmol L-1s-1; Cox et al., 2011), five-fold at a pH of 5.2 (3.9 vs. 0.8 nmol sulfide L-1s-1), and barely increased the rate of sulfide loss at a pH of 8.3 (9.1 vs. 8.4 nmol sulfide L-1s-1). Sulfide is predominately present as HS- at a pH of 8.3, which may not be taken up as easily by microorganisms as the H2S (aq) that dominates sulfide speciation at pH 2.5 and 5.2. That the loss of sulfide at acidic pH is due to biotic rather than abiotic factors is further supported by studies with whole mat samples that show greater sulfide consumption than killed controls (D'Imperio et al., 2008, AEM 74, 5802-5808). Taken together, the results of these experiments suggest that the majority of sulfide oxidation occurs in the filamentous biomass of hot spring ecosystems, although

  11. Inoculation and alkali coeffect in volatile fatty acids production and microbial community shift in the anaerobic fermentation of waste activated sludge.

    PubMed

    Huang, Long; Chen, Ben; Pistolozzi, Marco; Wu, Zhenqiang; Wang, Jufang

    2014-02-01

    Batch fermentations of waste activated sludge (WAS) at alkaline pH with different inocula were performed. Paper mill anaerobic granular sludge (PAS) and dyeing mill anaerobic sludge (DAS) were used as inocula. At pH 10 the inoculation did not increase the volatile fatty acids (VFAs) production compared to the non-inoculated samples fermented in the same conditions, and the maximal VFAs yield of non-inoculated WAS was higher than inoculated WAS. However, at pH 9 the inoculation with PAS increased the sludge hydrolysis and VFAs production was 1.7-fold higher than that in non-inoculated WAS (yield 52.40mg/g of volatile solid). Denaturing gradient gel electrophoresis analysis revealed that 3 bacterial species, identified as Proteocatella, Tepidibacter, and Clostridium, disappeared when inoculated with PAS at pH 9 or at pH⩾10. The results showed that the inoculation with PAS can be helpful to achieve a relatively high VFAs production from WAS in a moderate alkaline environment. PMID:24345567

  12. Effects of sub-lethal concentrations of thyme and oregano essential oils, carvacrol, thymol, citral and trans-2-hexenal on membrane fatty acid composition and volatile molecule profile of Listeria monocytogenes, Escherichia coli and Salmonella enteritidis.

    PubMed

    Siroli, Lorenzo; Patrignani, Francesca; Gardini, Fausto; Lanciotti, Rosalba

    2015-09-01

    The aim of this work was to investigate the modifications of cell membrane fatty acid composition and volatile molecule profiles of Listeria monocytogenes, Salmonella enteritidis, Escherichia coli, during growth in the presence of different sub-lethal concentrations of thyme and oregano essential oils as well as carvacrol, thymol, trans-2-hexenal and citral. The results evidenced that the tested molecules induced noticeable modifications of membrane fatty acid profiles and volatile compounds produced during the growth. Although specific differences in relation to the species considered were identified, the tested compounds induced a marked increase of some membrane associated fatty acids, particularly unsaturated fatty acids, trans-isomers, and specific released free fatty acids. These findings can contribute to the comprehension of the stress response mechanisms used by different pathogenic microorganisms often involved in food-borne diseases in relation to the exposure to sub-lethal concentrations of natural antimicrobials. PMID:25842326

  13. Labile sulfide and sulfite in phytochelatin complexes

    SciTech Connect

    Eannetta, N.T.; Steffens, J.C. )

    1989-04-01

    Heavy metals such as cadmium induce tomato cell cultures to synthesize the metal binding polypeptides ({gamma}-Glu-Cys){sub 3} and ({gamma}-Glu-Cys){sub 4}-Gly (phytochelatins). Tomato cells selected for growth on normally lethal concentrations of CdCl{sub 2} synthesize higher quantities of these polypeptides. Cd{sup r} cells are not cross-resistant to other heavy metals, and recent work suggests that metal detoxification by these peptides may be Cd-specific. The occurrence of labile sulfur as a component of the metal complex raises questions concerning possible functions of phytochelatins besides that of Cd binding. The presence of acid-labile sulfide ion in phytochelatin complexes has been reported by several groups. We report the additional finding that labile sulfite is also present in these complexes and in higher amounts than sulfide. Sulfide and sulfite are both released from the metal binding complex by acidification or by treatment with EDTA.

  14. Weathering of sulfides on Mars

    NASA Technical Reports Server (NTRS)

    Burns, Roger G.; Fisher, Duncan S.

    1987-01-01

    Pyrrhotite-pentlandite assemblages in mafic and ultramafic igneous rocks may have contributed significantly to the chemical weathering reactions that produce degradation products in the Martian regolith. By analogy and terrestrial processes, a model is proposed whereby supergene alteration of these primary Fe-Ni sulfides on Mars has generated secondary sulfides (e.g., pyrite) below the water table and produced acidic groundwater containing high concentrations of dissolved Fe, Ni, and sulfate ions. The low pH solutions also initiated weathering reactions of igneous feldspars and ferromagnesian silicates to form clay silicate and ferric oxyhydroxide phases. Near-surface oxidation and hydrolysis of ferric sulfato-and hydroxo-complex ions and sols formed gossan above the water table consisting of poorly crystalline hydrated ferric sulfates (e.g., jarosite), oxides (ferrihydrite, goethite), and silica (opal). Underlying groundwater, now permafrost contains hydroxo sulfato complexes of Fe, Al, Mg, Ni, which may be stabilized in frozen acidic solutions beneath the surface of Mars. Sublimation of permafrost may replenish colloidal ferric oxides, sulfates, and phyllosilicates during dust storms on Mars.

  15. Economic process to produce biohydrogen and volatile fatty acids by a mixed culture using vinasse from sugarcane ethanol industry as nutrient source.

    PubMed

    Sydney, Eduardo Bittencourt; Larroche, Christian; Novak, Alessandra Cristine; Nouaille, Regis; Sarma, Saurabh Jyoti; Brar, Satinder Kaur; Letti, Luiz Alberto; Soccol, Vanete Thomaz; Soccol, Carlos Ricardo

    2014-05-01

    This work evaluates the potential of vinasse (a waste obtained at the bottom of sugarcane ethanol distillation columns) as nutrient source for biohydrogen and volatile fatty acids production by means of anaerobic consortia. Two different media were proposed, using sugarcane juice or molasses as carbon source. The consortium LPBAH1 was selected for fermentation of vinasse supplemented with sugarcane juice, resulting in a higher H2 yield of 7.14 molH2 molsucrose(-1) and hydrogen content in biogas of approx. 31%, while consortium LPBAH2 resulted in 3.66 molH2/molsucrose and 32.7% hydrogen content in biogas. The proposed process showed a rational and economical use for vinasse, a mandatory byproduct of the renewable Brazilian energy matrix. PMID:24675397

  16. Temporal trends in vent fluid iron and sulfide chemistry following the 2005/2006 eruption at East Pacific Rise, 9°50'N

    NASA Astrophysics Data System (ADS)

    Yücel, Mustafa; Luther, George W.

    2013-04-01

    The chemistry of vent fluids that emanate to the seafloor undergoes dramatic changes after volcanic eruptions. Data on these changes are still limited, but the best studied example is the East Pacific Rise (EPR) at 9°50'N, where the temporal evolution of the vent fluid chemistry after the 1991/1992 eruption was documented. The area underwent another eruption sequence during late 2005/early 2006, and here we show that a similar evolution is recurring in the iron and sulfide contents of the high-temperature fluids sampled in June 2006, January 2007, and June 2008. The vents have had increasing dissolved iron and decreasing acid-volatile sulfide (free sulfide plus FeS) concentrations with 1 order of magnitude variation. In addition, chromium reducible sulfide (mainly pyrite) also had fivefold decreasing concentrations over the 3 years. Our results confirm a pattern that was noted only once before for 9°50'N EPR and emphasize the dramatic yearly variability in the concentrations of iron-sulfur species emanating from vents.

  17. Combining pH and electrical conductivity measurements to improve titrimetric methods to determine ammonia nitrogen, volatile fatty acids and inorganic carbon concentrations.

    PubMed

    Charnier, C; Latrille, E; Lardon, L; Miroux, J; Steyer, J P

    2016-05-15

    Volatile fatty acids (VFA), inorganic carbon (IC) and total ammonia nitrogen (TAN) are key variables in the current context of anaerobic digestion (AD). Accurate measurements like gas chromatography and infrared spectrometry have been developed to follow the concentration of these compounds but none of these methods are affordable for small AD units. Only titration methods answer the need for small plant monitoring. The existing methods accuracy was assessed in this study and reveals a lack of accuracy and robustness to control AD plants. To solve these issues, a new titrimetric device to estimate the VFA, IC and TAN concentrations with an improved accuracy was developed. This device named SNAC (System of titration for total ammonia Nitrogen, volatile fatty Acids and inorganic Carbon) has been developed combining the measurement of electrical conductivity and pH. SNAC were tested on 24 different plant samples in a range of 0-0.16 mol.L(-1) TAN, 0.01-0.21 mol.L(-1) IC and 0-0.04 mol.L(-1) VFA. The standard error was about 0.012 mol.L(-1) TAN, 0.015 mol.L(-1) IC and 0.003 mol.L(-1) VFA. The coefficient of determination R(2) between the estimated and reference data was 0.95, 0.94 and 0.95 for TAN, IC and VFA respectively. Using the same data, current methods based on key pH points lead to standard error more than 14.5 times higher on VFA and more than 1.2 times higher on IC. These results show that SNAC is an accurate tool to improve the management of AD plant. PMID:27010787

  18. Comparison of sugar, acids, and volatile composition in raspberry bushy dwarf virus-resistant transgenic raspberries and the wild type 'meeker' (rubus idaeus L.).

    PubMed

    Malowicki, Sarah M M; Martin, Robert; Qian, Michael C

    2008-08-13

    Raspberry bushy dwarf virus (RBDV) causes a significant reduction in yield and quality in raspberry and raspberry-blackberry hybrid. Genetic modifications were made to 'Meeker' red raspberries to impart RBDV resistance. The RBDV-resistant transgenic and wild type 'Meeker' plants were grown in Oregon and Washington, and the fruits were harvested in the 2004 and 2005 growing seasons. Year-to-year and site-to-site variations were observed for the degrees Brix and titratable acidity, with Oregon raspberries having slightly higher degrees Brix and lower titratable acidity than Washington raspberries. Twenty-nine volatile compounds were quantified using stir bar sorptive extraction (SBSE) paired with gas chromatography-mass spectrometry (GC-MS). There were very few differences in volatile concentrations between the transgenic varieties and the wild type 'Meeker'. Much larger variations were observed between sites and harvest seasons. Raspberries grown in Oregon appeared to have higher concentrations of delta-octalactone, delta-decalactone, geraniol, and linalool. Chiral analysis of alpha-ionone, alpha-pinene, linalool, terpinen-4-ol, delta-octalactone, and delta-decalactone demonstrated a much higher percentage of one isomer over the other, particularly alpha-ionone, alpha-pinene, delta-octalactone, and delta-decalactone, with more than 90% of one isomer, while a racemic mixture was observed for linalool. The isomeric analysis revealed very little variation between varieties, locations, or years. The flavor compounds tested in this study did not show any difference between the transgenic lines and the wild type 'Meeker' raspberry. PMID:18598047

  19. Effect of the dietary supplementation of essential oils from rosemary and artemisia on muscle fatty acids and volatile compound profiles in Barbarine lambs.

    PubMed

    Vasta, Valentina; Aouadi, Dorra; Brogna, Daniela M R; Scerra, Manuel; Luciano, Giuseppe; Priolo, Alessandro; Ben Salem, Hichem

    2013-10-01

    Eighteen Barbarine lambs (3 months of age), were assigned for 95 days to 3 treatments: six lambs were fed a barley-based concentrate plus oat hay ad libitum (control group, C); other lambs received the control diet plus essential oil (400 ppm DM) either of Rosmarinus officinalis (R400 group; n=6) or of Artemisia herba alba (A400 group; n=6). At slaughter the muscle longissimus dorsi was sampled and subjected to fatty acid and volatile organic compounds (VOC) analyses. The A400 lambs presented a greater amount of vaccenic, rumenic and linolenic acids and of polyunsaturated fatty acids (PUFA) in meat than the C and R400 animals. Essential oils supplementation did not affect meat VOC profile though the sesquiterpenes copaene and β-caryophyllene were detected only in the meat of R400 and A400 lambs. It is concluded that the supplementation of rosemary or artemisia essential oils does not produce detrimental effects on lamb meat VOC profile. The supplementation of artemisia can improve meat healthy properties. PMID:23747617

  20. The role of poly-hydroxy-alkanoate form in determining the response of enhanced biological phosphorus removal biomass to volatile fatty acids.

    PubMed

    Liu, Yan-Hua; Geiger, Cherie; Randall, Andrew Amis

    2002-01-01

    Anaerobic-aerobic batch experiments indicated that poly-hydroxy-alkanoate (PHA) form was important in determining the net phosphorus removal resulting from different volatile fatty acids (VFAs). Poly-3-hydroxy-butyrate (3HB) content was found to correlate fairly well with higher observed aerobic phosphorus uptake per unit PHA carbon degraded. Poly-3-hydroxy-valerate (3HV) correlated with lower aerobic phosphorus uptakes per unit PHA carbon degraded. These experiments, conducted with synthetic wastewater, imply that VFA speciation might have a significant effect on aerobic phosphorus uptakes and net phosphorus removal. In addition, the model parameter fP.UPT (Barker and Dold, 1997) could vary with the proportion of acetic to propionic acid received (i.e., the acetic/propionic acid ratio may be an important parameter for these systems). Carbohydrate data implied that the lower aerobic phosphorus uptake resulting from 3HV might have been caused by a greater fraction of PHA carbon shunting to carbohydrate biosynthesis during aerobiosis. PMID:11995868

  1. The gas chromatographic determination of volatile fatty acids in wastewater samples: evaluation of experimental biases in direct injection method against thermal desorption method.

    PubMed

    Ullah, Md Ahsan; Kim, Ki-Hyun; Szulejko, Jan E; Cho, Jinwoo

    2014-04-11

    The production of short-chained volatile fatty acids (VFAs) by the anaerobic bacterial digestion of sewage (wastewater) affords an excellent opportunity to alternative greener viable bio-energy fuels (i.e., microbial fuel cell). VFAs in wastewater (sewage) samples are commonly quantified through direct injection (DI) into a gas chromatograph with a flame ionization detector (GC-FID). In this study, the reliability of VFA analysis by the DI-GC method has been examined against a thermal desorption (TD-GC) method. The results indicate that the VFA concentrations determined from an aliquot from each wastewater sample by the DI-GC method were generally underestimated, e.g., reductions of 7% (acetic acid) to 93.4% (hexanoic acid) relative to the TD-GC method. The observed differences between the two methods suggest the possibly important role of the matrix effect to give rise to the negative biases in DI-GC analysis. To further explore this possibility, an ancillary experiment was performed to examine bias patterns of three DI-GC approaches. For instance, the results of the standard addition (SA) method confirm the definite role of matrix effect when analyzing wastewater samples by DI-GC. More importantly, their biases tend to increase systematically with increasing molecular weight and decreasing VFA concentrations. As such, the use of DI-GC method, if applied for the analysis of samples with a complicated matrix, needs a thorough validation to improve the reliability in data acquisition. PMID:24745750

  2. Advanced treatment of residual nitrogen from biologically treated coke effluent by a microalga-mediated process using volatile fatty acids (VFAs) under stepwise mixotrophic conditions.

    PubMed

    Ryu, Byung-Gon; Kim, Woong; Heo, Sung-Woon; Kim, Donghyun; Choi, Gang-Guk; Yang, Ji-Won

    2015-09-01

    This work describes the development of a microalga-mediated process for simultaneous removal of residual ammonium nitrogen (NH4(+)-N) and production of lipids from biologically treated coke effluent. Four species of green algae were tested using a sequential mixotrophic process. In the first phase-CO2-supplied mixotrophic condition-all microalgae assimilated NH4(+)-N with no evident inhibition. In second phase-volatile fatty acids (VFAs)-supplied mixotrophic condition-removal rates of NH4(+)-N and biomass significantly increased. Among the microalgae used, Arctic Chlorella sp. ArM0029B had the highest rate of NH4(+)-N removal (0.97 mg/L/h) and fatty acid production (24.9 mg/L/d) which were 3.6- and 2.1-fold higher than those observed under the CO2-supplied mixotrophic condition. Redundancy analysis (RDA) indicated that acetate and butyrate were decisive factors for increasing NH4(+)-N removal and fatty acid production. These results demonstrate that microalgae can be used in a sequential process for treatment of residual nitrogen after initial treatment of activated sludge. PMID:25881553

  3. Impact of diets with a high content of greaves-meal protein or carbohydrates on faecal characteristics, volatile fatty acids and faecal calprotectin concentrations in healthy dogs

    PubMed Central

    2013-01-01

    Background Research suggests that dietary composition influences gastrointestinal function and bacteria-derived metabolic products in the dog colon. We previously reported that dietary composition impacts upon the faecal microbiota of healthy dogs. This study aims at evaluating the dietary influences on bacteria-derived metabolic products associated with the changes in faecal microbiota that we had previously reported. We fed high-carbohydrate starch based (HCS), [crude protein: 194 g/kg, starch: 438 g/kg], high-protein greaves-meal (HPGM), [crude protein: 609 g/kg, starch: 54 g/kg] and dry commercial (DC), [crude protein: 264 g/kg, starch: 277 g/kg] diets, and studied their effects on the metabolism of the colonic microbiota and faecal calprotectin concentrations in five Beagle dogs, allocated according to the Graeco-Latin square design. Each dietary period lasted for three weeks and was crossed-over with washout periods. Food intake, body weight, and faecal consistency scores, dry matter, pH, ammonia, volatile fatty acids (VFAs), and faecal canine calprotectin concentrations were determined. Results Faecal ammonia concentrations decreased with the HCS diet. All dogs fed the HPGM diet developed diarrhoea, which led to differences in faecal consistency scores between the diets. Faecal pH was higher with the HPGM diet. Moreover, decreases in propionic and acetic acids coupled with increases in branched-chain fatty acids and valeric acid caused changes in faecal total VFAs in dogs on the HPGM diet. Faecal canine calprotectin concentration was higher with the HPGM diet and correlated positively with valeric acid concentration. Conclusions The HPGM diet led to diarrhoea in all dogs, and there were differences in faecal VFA profiles and faecal canine calprotectin concentrations. PMID:24107268

  4. Volatile aromatic hydrocarbons and dicarboxylic acid concentrations in air at an urban site in the Southwestern US

    NASA Astrophysics Data System (ADS)

    Tran, Ngoc K.; Steinberg, Spencer M.; Johnson, Brian J.

    Concentrations of benzene, toluene, ethylbenzene, o-xylene, and m- and p-xylene were measured at an urban sampling site in Las Vegas, NV by sorbent sampling followed by thermal desorption and determination by GC-PID. Simultaneously, measurements of oxalic, malonic, succinic, and adipic acids were made at the same site by collection on quartz filters, extraction, esterification, and determination by GC-FID. For the period from April 7, 1997 to June 11, 1997, 201 sets of hydrocarbon measurements and 99 sets of acid measurements were made. Additional measurements of dicarboxylic acids were made on samples that represented potential direct sources, e.g. green plants and road dust. Correlations between the hydrocarbon and CO concentrations (measured by the Clark County Health District at a nearby site) were highly significant and a strong negative correlation of hydrocarbon concentration with ozone concentration (also from the county site) was observed under quiescent atmospheric conditions. In general, dicarboxylic acid concentrations were well correlated with one another (with the exception of adipic acid) but not well correlated with hydrocarbon, CO, and ozone concentrations. Multiple sources and complex formation processes are indicated for the dicarboxylic acids.

  5. Evaluation of sampling methods for measuring exposure to volatile inorganic acids in workplace air. Part 2: Sampling capacity and breakthrough tests for sodium carbonate-impregnated filters.

    PubMed

    Demange, Martine; Oury, Véronique; Rousset, Davy

    2011-11-01

    In France, the MétroPol 009 method used to measure workplace exposure to inorganic acids, such as HF, HCl, and HNO3, consists of a closed-face cassette fitted with a prefilter to collect particles, and two sodium carbonate-impregnated filters to collect acid vapor. This method was compared with other European methods during the development of a three-part standard (ISO 21438) on the determination of inorganic acids in workplace air by ion chromatography. Results of this work, presented in a companion paper, led to a need to go deeper into the performance of the MétroPol 009 method regarding evaluation of the breakthrough of the acids, both alone and in mixtures, interference from particulate salts, the amount of sodium carbonate required to impregnate the sampling filter, the influence of sampler components, and so on. Results enabled improvements to be made to the sampling device with respect to the required amount of sodium carbonate to sample high HCl or HNO3 concentrations (500 μL of 5% Na2CO3 on each of two impregnated filters). In addition, a PVC-A filter used as a prefilter in a sampling device showed a propensity to retain HNO3 vapor so a PTFE filter was considered more suitable for use as a prefilter. Neither the material of the sampling cassette (polystyrene or polypropylene) nor the sampling flowrate (1 L/min or 2 L/min) influenced the performance of the sampling device, as a recovery of about 100% was achieved in all experiments for HNO3, HCl, and HF, as well as HNO3+HF and HNO3+HCl mixtures, over a wide range of concentrations. However, this work points to the possibility of interference between an acid and salts of other acids. For instance, interference can occur through interaction of HNO3 with chloride salts: the stronger the acid, the greater the interference. Methods based on impregnated filters are reliable for quantitative recovery of inorganic volatile acids in workplace atmosphere but are valuable only in the absence of interferents. PMID

  6. Gas chromatography coupled to mass spectrometry analysis of volatiles, sugars, organic acids and aminoacids in Valencia Late orange juice and reliability of the Automated Mass Spectral Deconvolution and Identification System for their automatic identification and quantification.

    PubMed

    Cerdán-Calero, Manuela; Sendra, José María; Sentandreu, Enrique

    2012-06-01

    Neutral volatiles and non-volatile polar compounds (sugars, organics acids and aminoacids) present in Valencia Late orange juice have been analysed by Gas Chromatography coupled to Mass Spectrometry (GC-MS). Before analysis, the neutral volatiles have been extracted by Headspace-Solid Phase Microextraction (HS-SPME), and the non-volatile polar compounds have been transformed to their corresponding volatile trimethylsilyl (TMS) derivatives. From the resulting raw GC-MS data files, the reliability of the Automated Mass Spectral Deconvolution and Identification System (AMDIS) to perform accurate identification and quantification of the compounds present in the sample has been tested. Hence, both raw GC-MS data files have been processed automatically by using AMDIS and manually by using Xcalibur™, the manufacturer's data processing software for the GC-MS platform used. Results indicate that the reliability of AMDIS for accurate identification and quantification of the compounds present in the sample strongly depends on a number of operational settings, for both the MS and AMDIS, which must be optimized for the particular type of assayed sample. After optimization of these settings, AMDIS and Xcalibur™ yield practically the same results. A total of 85 volatiles and 22 polar compounds have been identified and quantified in Valencia Late orange juice. PMID:22533907

  7. Production of hydrogen, ethanol and volatile fatty acids through co-fermentation of macro- and micro-algae.

    PubMed

    Xia, Ao; Jacob, Amita; Tabassum, Muhammad Rizwan; Herrmann, Christiane; Murphy, Jerry D

    2016-04-01

    Algae may be fermented to produce hydrogen. However micro-algae (such as Arthrospira platensis) are rich in proteins and have a low carbon/nitrogen (C/N) ratio, which is not ideal for hydrogen fermentation. Co-fermentation with macro-algae (such as Laminaria digitata), which are rich in carbohydrates with a high (C/N) ratio, improves the performance of hydrogen production. Algal biomass, pre-treated with 2.5% dilute H2SO4 at 135°C for 15min, effected a total yield of carbohydrate monomers (CMs) of 0.268g/g volatile solids (VS). The CMs were dominating by glucose and mannitol and most (ca. 95%) were consumed by anaerobic fermentative micro-organisms during subsequent fermentation. An optimal specific hydrogen yield (SHY) of 85.0mL/g VS was obtained at an algal C/N ratio of 26.2 and an algal concentration of 20g VS/L. The overall energy conversion efficiency increased from 31.3% to 54.5% with decreasing algal concentration from 40 to 5 VS g/L. PMID:26820925

  8. Sulfidation of silver nanoparticles

    NASA Astrophysics Data System (ADS)

    Levard, C.; Michel, F. M.; Brown, G. E.

    2010-12-01

    Rapid development of nanotechnologies that exploit the properties of silver nanoparticles (Ag-NPs) raises questions concerning the impact of Ag on the environment. Ag-NPs are currently among the most widely used in the nanotechnology industry and the amount released into the environment is expected to increase along with production (1). When present in geochemical systems, Ag-NPs may undergo a variety of changes due to varying redox, pH, and chemical conditions. Expected changes range from surface modification (e.g., oxidation, sulfidation, chloridation etc.) to complete dissolution and re-precipitation. In this context, the focus of our work is on understanding the behavior of synthetic Ag-NPs with different particle sizes under varying conditions relevant to the environment. Sulfidation of Ag-NPs is of particular interest since it among the processes most likely to occur in aqueous systems, in particular under reducing conditions. Three sizes of Ag-NPs coated with polyvinyl pyrrolidone were produced using the polyol process (2) (7 ±1; 20 ±4, and 40 ±9 nm). Batch solutions containing the different Ag-NPs were subsequently reacted with Na2S solutions of different concentrations. The sulfidation process was followed step-wise for 24 hours and the corrosion products formed were characterized by electron microscopy (TEM/SEM), diffraction (XRD), and photo-electron spectroscopy (XPS). Surface charge (pHPZC) of the products formed during this process was also measured, as were changes in solubility and reactivity. Based on experimental observations we infer that the sulfidation process is the result of dissolution-precipitation and find that: (i) acanthite (Ag2S) is formed as a corrosion product; (ii) Ag-NPs aggregation increased with sulfidation rate; (iii) pHPZC increases with the rate of sulfidation; and (iv) the solubility of the corrosion products formed from sulfidation appears lower than that of non-sulfidated Ag-NPs. We observe size-dependent differences in

  9. The diversity of the fecal bacterial community and its relationship with the concentration of volatile fatty acids in the feces during subacute rumen acidosis in dairy cows

    PubMed Central

    2012-01-01

    Background Sub-acute ruminal acidosis (SARA) is a well-recognized digestive disorder found in particular in well-managed dairy herds. SARA can result in increased flow of fermentable substrates to the hindgut, which can increase the production of volatile fatty acids, alter the structure of the microbial community, and have a negative effect on animal health and productivity. However, little is known about changes in the structure of the microbial community and its relationship with fatty acids during SARA. Four cannulated primiparous (60 to 90 day in milk) Holstein dairy cows were assigned to two diets in a 2 × 2 crossover experimental design. The diets contained (on a dry matter basis): 40% (control diet, COD) and 70% (SARA induction diet, SAID) concentrate feeds. Samples of ruminal fluid and feces were collected on day 12, 15, 17 and 21 of the treatment period, and the pH was measured in the ruminal and fecal samples; the fecal microbiota was determined by pyrosequencing analysis of the V1–V3 region of amplified 16S ribosomal RNA (16S rRNA). Results SAID decreased ruminal and fecal pH and increased the propionate, butyrate and total volatile fatty acid (TVFA) concentration in feces when compared with the COD. A barcoded DNA pyrosequencing method was used to generate 2116 16S operational taxonomic units (OTUs). A total of 11 phyla were observed, distributed amongst all cattle on both diets; however, only 5 phyla were observed in all animals regardless of dietary treatment, and considerable animal to animal variation was revealed. The average abundance and its range of the 5 phyla were as follows: Firmicutes (63.7%, 29.1–84.1%), Proteobacteria (18.3%, 3.4–46.9%), Actinobacteria (6.8%, 0.4–39.9%), Bacteroidetes (7.6%, 2.2–17.7%) and Tenericutes (1.6%, 0.3–3%). Feeding the SAID resulted in significant shifts in the structure of the fecal microbial community when compared with the traditional COD. Among the 2116 OTUs detected in the present study, 88

  10. Correlation between composition of the bacterial community and concentration of volatile fatty acids in the rumen during the transition period and ketosis in dairy cows.

    PubMed

    Wang, Xiaoxu; Li, Xiaobing; Zhao, Chenxu; Hu, Pan; Chen, Hui; Liu, Zhaoxi; Liu, Guowen; Wang, Zhe

    2012-04-01

    The transition period is a severe challenge to dairy cows. Glucose supply cannot meet demand and body fat is mobilized, potentially leading to negative energy balance (NEB), ketosis, or fatty liver. Propionate produces glucose by gluconeogenesis, which depends heavily on the number and species of microbes. In the present study, we analyzed the rumen microbiome composition of cows in the transition period, cows with ketosis, and nonperinatal cows by terminal restriction fragment length polymorphism (TRFLP) analysis of 16S rRNA genes and quantitative PCR. TRFLP analysis indicated that the quantity of Veillonellaceae organisms was reduced and that of Streptococcaceae organisms was increased in rumen samples from the transition period and ketosis groups, with the number of Lactobacillaceae organisms increased after calving. Quantitative PCR data suggested that the numbers of the main propionate-producing microbes, Megasphaera elsdenii and Selenomonas ruminantium, were decreased, while numbers of the main lactate-producing bacterium, Streptococcus bovis, were increased in the rumen of cows from the transition period and ketosis groups, with the number of Lactobacillus sp. organisms increased after calving. Volatile fatty acid (VFA) and glucose concentrations were decreased, but the lactic acid concentration was increased, in rumen samples from the transition period and ketosis groups. Our results indicate that the VFA concentration is significantly related to the numbers of Selenomonas ruminantium and Megasphaera elsdenii organisms in the rumen. PMID:22267666

  11. SULFIDE METHOD PLUTONIUM SEPARATION

    DOEpatents

    Duffield, R.B.

    1958-08-12

    A process is described for the recovery of plutonium from neutron irradiated uranium solutions. Such a solution is first treated with a soluble sullide, causing precipitation of the plutoniunn and uraniunn values present, along with those impurities which form insoluble sulfides. The precipitate is then treated with a solution of carbonate ions, which will dissolve the uranium and plutonium present while the fission product sulfides remain unaffected. After separation from the residue, this solution may then be treated by any of the usual methods, such as formation of a lanthanum fluoride precipitate, to effect separation of plutoniunn from uranium.

  12. Analysis of Phosphonic Acids: Validation of Semi-Volatile Analysis by HPLC-MS/MS by EPA Method MS999

    SciTech Connect

    Owens, J; Vu, A; Koester, C

    2008-10-31

    The Environmental Protection Agency's (EPA) Region 5 Chicago Regional Laboratory (CRL) developed a method titled Analysis of Diisopropyl Methylphosphonate, Ethyl Hydrogen Dimethylamidophosphate, Isopropyl Methylphosphonic Acid, Methylphosphonic Acid, and Pinacolyl Methylphosphonic Acid in Water by Multiple Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry: EPA Version MS999. This draft standard operating procedure (SOP) was distributed to multiple EPA laboratories and to Lawrence Livermore National Laboratory, which was tasked to serve as a reference laboratory for EPA's Environmental Reference Laboratory Network (ERLN) and to develop and validate analytical procedures. The primary objective of this study was to validate and verify the analytical procedures described in EPA Method MS999 for analysis of the listed phosphonic acids and surrogates in aqueous samples. The gathered data from this validation study will be used to: (1) demonstrate analytical method performance; (2) generate quality control acceptance criteria; and (3) revise the SOP to provide a validated method that would be available for use during a homeland security event. The data contained in this report will be compiled, by EPA CRL, with data generated by other EPA Regional laboratories so that performance metrics of EPA Method MS999 can be determined.

  13. Studies on antioxidant activity, volatile compound and fatty acid composition of different parts of Glycyrrhiza echinata L.

    PubMed Central

    Çakmak, Yavuz Selim; Aktumsek, Abdurrahman; Duran, Ahmet

    2012-01-01

    The essential oil compound, fatty acid composition and the in vitro antioxidant activity of the root and aerial of Glycyrrhiza echinata L., a medicinal plant growing in Turkey, have been studied. The antioxidant capacity tests were designed to evaluate the antioxidant activities of methanol extracts. Total phenolic and flavonoid concentrations of each extract were also determined by using both Folin-Ciocalteu reagent and aluminum chloride. The aerial part was found to possess the highest total phenolic content (146.30 ± 4.58 mg GAE/g) and total antioxidant capacity (175.33 ± 3.98 mg AE/g). The essential oil from root and aerial parts was analyzed by gas chromatography mass spectroscopy (GC-MS) systems. The major components identified were n-hexadecanoic acid, hexahydro farnesyl acetone, α-caryophyllen, hexanal and phytol. In fatty acid profiles of plant, palmitic, stearic, oleic and linoleic acid were detected as the main components. The results of this study have shown that the extracts G. echinata are suitable as a natural antioxidant and food supplement source for pharmacological and food industries due to their beneficial chemical composition and antioxidant capacity. PMID:27418901

  14. Quantitative analysis of growth and volatile fatty acid production by the anaerobic ruminal bacterium Megasphaera elsdenii T81

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Megaspheara elsdenii T81 grew on either DL-lactate or D-glucose at similar rates (0.85 per h), but displayed major differences in the fermentation of these substrates. Lactate was fermented at up to 210-mM concentration to yield acetic, propionic, butyric, and valeric acids. The bacterium was able t...

  15. Effects of Tannic Acid on Lipid and Protein Oxidation, Color, and Volatiles of Raw and Cooked Chicken Breast Meat during Storage

    PubMed Central

    Al-Hijazeen, Marwan; Lee, Eun Joo; Mendonca, Aubrey; Ahn, Dong Uk

    2016-01-01

    The objective of this study was to determine the effect of tannic acid (TA) on the oxidative stability and the quality characteristics of ground chicken breast meat. Five treatments including (1) control (none added), (2) 2.5 ppm TA, (3) 5 ppm TA, (4) 10 ppm TA, and (5) 5 ppm butylated hydroxyanisole (BHA) were added to boneless, skinless ground chicken breast meat, and used for both raw and cooked meat studies. For the raw meat study, the ground chicken breast meat was packaged in oxygen-permeable bags and stored at 4 °C for 7 days. For the cooked study, raw ground meat samples were vacuum-packaged in oxygen-impermeable vacuum bags, cooked in-bag to the internal temperature of 75 °C, re-packaged in oxygen-permeable bags, and then stored. Both raw and cooked meats were analyzed for lipid and protein oxidation, color, and volatiles (cooked meat only) at 0, 3, and 7 days of storage. Raw meats with 10 ppm of TA added had significantly (p ≤ 0.05) lower lipid and protein oxidation than other treatments during storage. In addition, TA at 10 ppm level maintained the highest color a*- and L*-values during storage. Cooked chicken breast meat with 5 and 10 ppm TA added produced significantly (p ≤ 0.05) lower amounts of off-odor volatiles than other treatments. Among the volatile compounds, the amount of hexanal increased rapidly during storage for cooked meat. However, meats with 5 and 10 ppm TA added showed the lowest amount of hexanal and other aldehydes related to lipid oxidation, indicating a strong antioxidant effect of TA in cooked chicken breast meat. Furthermore, the differences in aldehydes among the treatments were bigger in cooked than in raw meat, indicating that the antioxidant effect of TA in cooked meat was greater than that in raw meat. Therefore, TA at >5 ppm can be used as a good natural preservative in cooked chicken meat to maintain its quality during storage. PMID:27304971

  16. Effects of Tannic Acid on Lipid and Protein Oxidation, Color, and Volatiles of Raw and Cooked Chicken Breast Meat during Storage.

    PubMed

    Al-Hijazeen, Marwan; Lee, Eun Joo; Mendonca, Aubrey; Ahn, Dong Uk

    2016-01-01

    The objective of this study was to determine the effect of tannic acid (TA) on the oxidative stability and the quality characteristics of ground chicken breast meat. Five treatments including (1) control (none added), (2) 2.5 ppm TA, (3) 5 ppm TA, (4) 10 ppm TA, and (5) 5 ppm butylated hydroxyanisole (BHA) were added to boneless, skinless ground chicken breast meat, and used for both raw and cooked meat studies. For the raw meat study, the ground chicken breast meat was packaged in oxygen-permeable bags and stored at 4 °C for 7 days. For the cooked study, raw ground meat samples were vacuum-packaged in oxygen-impermeable vacuum bags, cooked in-bag to the internal temperature of 75 °C, re-packaged in oxygen-permeable bags, and then stored. Both raw and cooked meats were analyzed for lipid and protein oxidation, color, and volatiles (cooked meat only) at 0, 3, and 7 days of storage. Raw meats with 10 ppm of TA added had significantly (p ≤ 0.05) lower lipid and protein oxidation than other treatments during storage. In addition, TA at 10 ppm level maintained the highest color a*- and L*-values during storage. Cooked chicken breast meat with 5 and 10 ppm TA added produced significantly (p ≤ 0.05) lower amounts of off-odor volatiles than other treatments. Among the volatile compounds, the amount of hexanal increased rapidly during storage for cooked meat. However, meats with 5 and 10 ppm TA added showed the lowest amount of hexanal and other aldehydes related to lipid oxidation, indicating a strong antioxidant effect of TA in cooked chicken breast meat. Furthermore, the differences in aldehydes among the treatments were bigger in cooked than in raw meat, indicating that the antioxidant effect of TA in cooked meat was greater than that in raw meat. Therefore, TA at >5 ppm can be used as a good natural preservative in cooked chicken meat to maintain its quality during storage. PMID:27304971

  17. Three-component oxysulfenylation reaction: two simple and convenient approaches to β-alkoxy sulfides.

    PubMed

    Wang, Dingyi; Zhang, Rongxing; Ning, Wei; Yan, Zhaohua; Lin, Sen

    2016-06-14

    An unprecedented method for the synthesis of β-alkoxy sulfides via a NaI/HBr-mediated three-component oxysulfenylation reaction of alkenes with arylsulfinic acids and alcohols is reported. Furthermore, I2-promoted oxysulfenylation of alkenes using sodium arylsulfinates instead of arylsulfinic acids to synthesise various β-alkoxy sulfides is also described. PMID:27185479

  18. Distillate fuels containing an amine salt of a sulfonic acid and a low volatility carrier fluid (PNE-554)

    SciTech Connect

    Ashcraft, T.L.; Schilowitz, A.M.; Talley, L.D.; Berlowitz, P.J.

    1993-06-01

    A distillate fuel composition is described comprising a major amount of gasoline and a minor synergistic amount of an additive combination of (a) an amine salt of a sulfonic acid wherein the amine moiety is a monoamine, a polyamine, a monoamine or a polyamine containing ether linkages, or mixtures thereof, said amine moiety containing from 2 to 100 carbon atoms and from 1 to 3 nitrogen atoms, and the sulfonic acid moiety is an alkyl benzyl sulfonic acid in which the alkyl group contains from 20 to 50 carbon atoms, and (b) a carrier fluid that is mineral oil base stock, a polyol ester, and mixtures thereof, wherein less than 10 volume % of the carrier fluid in vaporized at a temperature of 125 C., provided that the amount of component (a) in the fuel composition is from about 40 to about 1500 ppm and the amount of component (b) is from about 0.1 to about 10 times the amount of component (a).

  19. Preparation of mesoporous cadmium sulfide nanoparticles with moderate pore size

    SciTech Connect

    Han Zhaohui Zhu, Huaiyong; Shi, Jeffrey; Parkinson, Gordon; Lu, G.Q.

    2007-03-15

    The preparation of cadmium sulfide nanoparticles that have a moderate pore size is reported. This preparation method involves a hydrothermal process that produces a precursor mixture and a following acid treatment of the precursor to get the porous material. The majority of the particles have a pore size close to 20nm, which complements and fills in the gap between the existing cadmium sulfide materials, which usually have a pore size either less than 10nm or are well above 100nm.

  20. Effects of a Bacteria-Based Probiotic on Ruminal pH, Volatile Fatty Acids and Bacterial Flora of Holstein Calves

    PubMed Central

    QADIS, Abdul Qadir; GOYA, Satoru; IKUTA, Kentaro; YATSU, Minoru; KIMURA, Atsushi; NAKANISHI, Shusuke; SATO, Shigeru

    2014-01-01

    ABSTRACT Twelve ruminally cannulated Holstein calves (age, 12 ± 3 weeks) were used to identify the effect of a probiotic comprised of Lactobacillus plantarum, Enterococcus faecium and Clostridium butyricum on ruminal components. The calves were adapted to a diet containing a 50% high-concentrate (standard diet) for 1 week, and then, the probiotic was given once daily for 5 days (day 1–5) at 1.5 or 3.0 g/100 kg body weight to groups of four calves each. Four additional calves fed the standard diet without probiotic served as the corresponding control. Ruminal pH was measured continuously throughout the 15-day experimental period. Ruminal fluid was collected via a fistula at a defined time predose and on days 7 and 14 to assess volatile fatty acid (VFA), lactic acid and ammonia-nitrogen concentrations, as well as the bacterial community. The probiotic at either dose improved the reduced 24-hr mean ruminal pH in calves. The circadian patterns of the 1 hr mean ruminal pH were identical between the probiotic doses. In both probiotic groups, ruminal lactic acid concentrations remained significantly lower than that of the control. Probiotic did not affect ruminal VFA concentrations. L. plantarum and C. butyricum were not detected in the rumen of calves given the high-dose probiotic, whereas Enterococcus spp. remained unchanged. These results suggest that calves given a probiotic had stable ruminal pH levels (6.6–6.8), presumably due to the effects of the probiotic on stabilizing rumen-predominant bacteria, which consume greater lactate in the rumen. PMID:24614603

  1. Zinc sulfide liquefaction catalyst

    DOEpatents

    Garg, Diwakar

    1984-01-01

    A process for the liquefaction of carbonaceous material, such as coal, is set forth wherein coal is liquefied in a catalytic solvent refining reaction wherein an activated zinc sulfide catalyst is utilized which is activated by hydrogenation in a coal derived process solvent in the absence of coal.

  2. Are accumulated sulfide-bound metals metabolically available in the benthic oligochaete Tubifex tubifex?

    PubMed

    De Jonge, Maarten; Eyckmans, Marleen; Blust, Ronny; Bervoets, Lieven

    2011-04-01

    The present study evaluates the relationship between metal-binding sediment characteristics like acid volatile sulfides (AVS), metal accumulation, and internal metal distribution in the benthic oligochaete Tubifex tubifex and relates this accumulation to the induction of metallothionein-like proteins (MTLPs). In total, 15 Flemish lowland rivers were sampled. Cd, Cu, Zn, Pb, Ni, As, Cr, Co, and Ag concentrations were measured in environmental fractions (water and sediment) and worm tissue (both total and subcellular fractions). Furthermore, total cytosolic MTLP concentrations were measured in the worm tissue. Our results showed that Cd, Pb, Ni, and Cr were mainly stored as biological detoxified metal (BDM) while Cu, Zn, As, and Ag were mostly available in the metal sensitive fraction (MSF). A remarkable difference in the subcellular distribution of accumulated Cd, Ni, and Co between anoxic (SEMMe-AVS<0; mostly stored as BDM) and oxic (SEMMe-AVS>0; mostly stored in the MSF) sediments was noticed. Moreover, a rapid increase in MTLP induction was found when SEMTot-AVS>0. Our results indicate that the accumulated sulfide-bound metals were detoxified and little available to the metabolism of T. tubifex under anoxic conditions. PMID:21375326

  3. Application of iron sulfide particles for groundwater and soil remediation: A review.

    PubMed

    Gong, Yanyan; Tang, Jingchun; Zhao, Dongye

    2016-02-01

    Rapid industrialization and urbanization have resulted in elevated concentrations of hazardous inorganic and organic contaminants in groundwater and soil, which has become a paramount concern to the environment and the public health. In recent years, iron sulfide (FeS), a major constituent of acid-volatile sulfides, has elicited extensive interests in environmental remediation due to its ubiquitous presence and high treatment efficiency in anoxic environment. This paper provides a comprehensive review on recent advances in: (1) synthesis of FeS particles (including nanoscale FeS); and (2) reactivity of FeS towards a variety of common environmental contaminants in groundwater and soil over extended periods of time, namely, heavy metals (Hg(II), Cu(II), Pb(II), and Cr(VI)), oxyanions (arsenite, arsenate, selenite, and selenate), radionuclides (e.g., uranium (U) and neptunium (Np)), chlorinated organic compounds (e.g., trichloroethane, trichloroethylene, and p-chloroaniline), nitroaromatic compounds, and polychlorinated biphenyls. Different physiochemical and biological methods for preparing FeS with desired particle size, structure, and surface properties are discussed. Reaction principles and removal effectiveness/constraints are discussed in details. Special attention is placed to the application of nanoscale FeS particles because of their unique properties, such as small particle size, large specific surface area, high surface reactivity, and soil deliverability in the subsurface. Moreover, current knowledge gaps and further research needs are identified. PMID:26707732

  4. Effect of bioturbation on metal-sulfide oxidation in surficial freshwater sediments

    SciTech Connect

    Peterson, G.S.; Ankley, G.T.; Leonard, E.N.

    1996-12-01

    Recent studies have demonstrated the role of acid-volatile sulfide (AVS) in controlling the bioavailability of several cationic metals in anoxic sediments. However, metal-sulfide complexes can be relatively labile with respect to oxidation associated with factors such as seasonal changes in rates of oxidation/production of AVS. Another potentially important mechanism of AVS oxidation in surficial sediments is bioturbation. The authors used different densities of the burrowing oligochaete Lumbriculus variegatus in a series of laboratory experiments to evaluate the effect of bioturbation on oxidation of AVS and subsequent bioavailability of cadmium and zinc spiked into freshwater sediments. Metal bioavailability was determined directly by bioaccumulation in the test organisms and indirectly through analysis of interstitial (pore) water metal concentrations. In the studies, horizon-specific sediment analyses were conducted to assess spatial differences in AVS and pore-water metal concentrations specifically related to organism activity. Burrowing activity of the oligochaete significantly reduced AVS concentrations in surficial sediments in a density-dependent manner and resulted in elevated interstitial water concentrations of cadmium but not zinc. Concentrations of cadmium in pore water from deeper horizons were consistently lower than those in the surficial sediments. The bioaccumulation of cadmium, but not zinc, but the oligochaetes. Overall, the results indicate that bioturbation can enhance the bioavailability of some cationic metals in surficial sediments, via oxidation of AVS, and demonstrate the importance of analyzing surficial sediments when assessing bioavailability of metals in sediments.

  5. Sulfidation kinetics of silver nanoparticles reacted with metal sulfides.

    PubMed

    Thalmann, Basilius; Voegelin, Andreas; Sinnet, Brian; Morgenroth, Eberhard; Kaegi, Ralf

    2014-05-01

    Recent studies have documented that the sulfidation of silver nanoparticles (Ag-NP), possibly released to the environment from consumer products, occurs in anoxic zones of urban wastewater systems and that sulfidized Ag-NP exhibit dramatically reduced toxic effects. However, whether Ag-NP sulfidation also occurs under oxic conditions in the absence of bisulfide has not been addressed, yet. In this study we, therefore, investigated whether metal sulfides that are more resistant toward oxidation than free sulfide, could enable the sulfidation of Ag-NP under oxic conditions. We reacted citrate-stabilized Ag-NP of different sizes (10-100 nm) with freshly precipitated and crystalline CuS and ZnS in oxygenated aqueous suspensions at pH 7.5. The extent of Ag-NP sulfidation was derived from the increase in dissolved Cu(2+) or Zn(2+) over time and linked with results from X-ray absorption spectroscopy (XAS) analysis of selected samples. The sulfidation of Ag-NP followed pseudo first-order kinetics, with rate coefficients increasing with decreasing Ag-NP diameter and increasing metal sulfide concentration and depending on the type (CuS and ZnS) and crystallinity of the reacting metal sulfide. Results from analytical electron microscopy revealed the formation of complex sulfidation patterns that seemed to follow preexisting subgrain boundaries in the pristine Ag-NP. The kinetics of Ag-NP sulfidation observed in this study in combination with reported ZnS and CuS concentrations and predicted Ag-NP concentrations in wastewater and urban surface waters indicate that even under oxic conditions and in the absence of free sulfide, Ag-NP can be transformed into Ag2S within a few hours to days by reaction with metal sulfides. PMID:24678586

  6. Effects of liquid aluminum chloride additions to poultry litter on broiler performance, ammonia emissions, soluble phosphorus, total volatile Fatty acids, and nitrogen contents of litter.

    PubMed

    Choi, I H; Moore, P A

    2008-10-01

    Recent studies have shown that the use of aluminum sulfate [alum, Al2(SO4)3.14H2O] and aluminum chloride (AlCl3) additions to animal manures are more effective than other chemicals in reducing ammonia (NH3) emissions and P solubility. Although the use of Al2(SO4)3.14H2O has been intensively used in the poultry industry for many years, no research has been conducted to evaluate the effect of liquid AlCl3 on these parameters. The objectives of this study were to determine the effects of applying liquid AlCl3 to poultry litter on 1) broiler performance, 2) NH3 fluxes, and 3) litter chemical characteristics, including soluble reactive P, total volatile fatty acids, and N content. Eight hundred broiler chicks were placed into 16 floor pens (50 birds/pen) in a single house for 6 wk. Liquid AlCl3 treatments were sprayed on the litter surface at rates of 100, 200, and 300 g of liquid AlCl3/kg of litter; un-treated litter served as controls. At the 2 lower rates, liquid AlCl3 treatments tended to improve weight gain and feed intake but had no effect on feed conversion or mortality, whereas the higher rate (300 g/kg of litter) had a negative effect on intake. Application of 100, 200, and 300 g of liquid AlCl3 reduced NH3 fluxes by 63, 76, and 76% during the 6-wk period, respectively, compared with the controls. Liquid AlCl3 additions reduced litter soluble reactive P contents by 24, 30, and 36%, respectively, at the low, medium, and high rates. Total volatile fatty acid contents (odor precursors) in litter were reduced by 20, 50, and 51%, respectively, with 100, 200, and 300 g of liquid AlCl3/kg of litter. Liquid AlCl3 additions increased total N, inorganic N, and plant available N contents in litter. These results indicate that liquid AlCl3 additions at the lower rates can provide significant positive environmental benefits to broiler operations. PMID:18809856

  7. Extraction and solubilization of crude oil and volatile petroleum hydrocarbons by purified humic and fulvic acids and sodium dodecylbenzenesulfonate.

    PubMed

    Eljack, Mahmoud D; Hussam, Abul

    2014-01-01

    Solubilization of crude oil (Fula, Sudan) in water demonstrates humic acid (HA), completely dissolves oil with a solubilization efficiency of 1600 g oil /g HA. The order of solubilization increases: HA > HA+ FA (fulvic acid) > FA > SDBS (sodium dodecylbenzene sulfonate). Synthetic surfactant like, SDBS, exhibits the lowest efficiency even with 23 times the concentration of FA or HA. Extraction of diesel contaminated sand and GC-MS analysis show that HA and FA exhibit 50-90% extraction efficiency for C10-C22 at pH 11.9 with just one extraction. SDBS exhibits the least removal efficiency (<1%) for normal hydrocarbons. The effect of pH on extraction with HA by its micelles such as the surface active property was found to be greater than that for FA. On the basis of critical concentration, the extraction efficiencies with FA and HA are 1287 and 11453 times compared to SDBS, respectively, for the least extracted hydrocarbon at pH 10.8. The HSGC experiments showed that the solubilization efficiency of alkylbenzenes in gasoline (Shell 87) increases almost linearly with FA concentration with a slight deviation at 5-6 μM FA. About 35-60% of alkylbenzenes in gasoline were solubilized and partitioned at the highest FA concentration (15 μM) studied. Both studies with gasoline and diesel show similar extraction efficiencies even at 227-fold increased FA with diesel. PMID:25320849

  8. Influence of Avotan on the microflora and concentrations of ammonia and volatile fatty acids in the rumen.

    PubMed

    Sommer, A; Chrenková, M; Ceresnáková, Z; Szakács, J; Flák, P; Uváciková, I

    1993-01-01

    The influence of Avotan (Firm Cyanamid) was studied on VFA concentration, pH, dynamics of NH3 and on numbers of chosen species of rumen microorganisms in physiological experiments with four young bulls and two wethers with rumen cannulas. It was found no marked physiological change in pH of rumen fluid under the influence of Avotan. Difference between groups were statistical significant. Avotan caused significant (P < or = 0.01) decrease of molar % of acetic acid (from 67.0 to 62.1) and an increase of propionic acid (from 16.41 to 28.21 mol %) in wethers. These changes were nonsignificant with bulls. The acetate: propionate ratio decreased significantly from 4.1 to 2.2 in wethers. Avotan decreased highly significantly (P < or = 0.01) the level of NH3 in the rumen fluid during the observed period (0, 1.5, 3, 4.5 and 6 hours after feeding) in bulls. It was observed the similar effect in wethers 3 hours after feeding (from 170 mmol to 81 mmol/l). Decrease of the total number of microorganisms in the rumen fluid was observed in animals which received Avotan (on the average 3.5 times in young bulls, and 4.5 times in wethers). The number of enterococci decreased significantly (2.8-4.5 times), number of amylolytic bacteria decreased less significantly. PMID:8572917

  9. Control of Microbial Sulfide Production with Biocides and Nitrate in Oil Reservoir Simulating Bioreactors

    PubMed Central

    Xue, Yuan; Voordouw, Gerrit

    2015-01-01

    Oil reservoir souring by the microbial reduction of sulfate to sulfide is unwanted, because it enhances corrosion of metal infrastructure used for oil production and processing. Reservoir souring can be prevented or remediated by the injection of nitrate or biocides, although injection of biocides into reservoirs is not commonly done. Whether combined application of these agents may give synergistic reservoir souring control is unknown. In order to address this we have used up-flow sand-packed bioreactors injected with 2 mM sulfate and volatile fatty acids (VFA, 3 mM each of acetate, propionate and butyrate) at a flow rate of 3 or 6 pore volumes (PV) per day. Pulsed injection of the biocides glutaraldehyde (Glut), benzalkonium chloride (BAC) and cocodiamine was used to control souring. Souring control was determined as the recovery time (RT) needed to re-establish an aqueous sulfide concentration of 0.8–1 mM (of the 1.7–2 mM before the pulse). Pulses were either for a long time (120 h) at low concentration (long-low) or for a short time (1 h) at high concentration (short-high). The short-high strategy gave better souring control with Glut, whereas the long-low strategy was better with cocodiamine. Continuous injection of 2 mM nitrate alone was not effective, because 3 mM VFA can fully reduce both 2 mM nitrate to nitrite and N2 and, subsequently, 2 mM sulfate to sulfide. No synergy was observed for short-high pulsed biocides and continuously injected nitrate. However, use of continuous nitrate and long-low pulsed biocide gave synergistic souring control with BAC and Glut, as indicated by increased RTs in the presence, as compared to the absence of nitrate. Increased production of nitrite, which increases the effectiveness of souring control by biocides, is the most likely cause for this synergy. PMID:26696994

  10. Enhancement of volatile fatty acid production by co-fermentation of food waste and excess sludge without pH control: The mechanism and microbial community analyses.

    PubMed

    Wu, Qing-Lian; Guo, Wan-Qian; Zheng, He-Shan; Luo, Hai-Chao; Feng, Xiao-Chi; Yin, Ren-Li; Ren, Nan-Qi

    2016-09-01

    The study provided a cost-effective and high-efficiency volatile fatty acid (VFA) production strategy by co-fermentation of food waste (FW) and excess sludge (ES) without artificial pH control. VFA production of 867.42mg COD/g-VS was obtained under the optimized condition: FW/ES 5, solid retention time 7d, organic loading rate 9g VS/L-d and temperature 40°C. Mechanism exploration revealed that the holistic biodegradability of substrate was greatly enhanced, and proper pH range (5.2-6.4) was formed by the high buffering capacity of the co-fermentation system itself, which effectively enhanced hydrolysis yield (63.04%) and acidification yield (83.46%) and inhibited methanogenesis. Moreover, microbial community analysis manifested that co-fermentation raised the relative abundances of hydrolytic and acidogenic bacteria including Clostridium, Sporanaerobacter, Tissierella and Bacillus, but suppressed the methanogen Anaerolineae, which also facilitated high VFA production. These results were of great guiding significance aiming for VFA recovery from FW and ES in large-scale. PMID:27289056

  11. Anti-inflammatory effect of volatile oil and hydroalcoholic extract of Rosa damascena Mill. on acetic acid-induced colitis in rats.

    PubMed

    Latifi, Ghazal; Ghannadi, Alireza; Minaiyan, Mohsen

    2015-01-01

    Rosa damascena is a small plant belonging to Rosaceae family which has been used for the treatment of some inflammatory diseases and digestive disorders in the Iranian folk medicine. This study was performed to investigate the effect of R. damascena hydroalcoholic extract (RDHE) and R. damascena volatile oil (RDVO) on ulcerative colitis induced by acetic acid in rats. Different doses of RDHE (250, 500, 1000 mg/kg) and RDVO (100, 200, 400 µl/kg) were given orally (p.o.) and doses of RDHE (125, 250, 500 mg/kg) were administrated intraperitoneally (i.p.) to the male Wistar rats (n=6) 2 h before induction of colitis which continued daily for 4 successive days. Prednisolone (4 mg/kg p.o.) and dexamethasone (1 mg/kg i.p.) were used in the reference groups. Weight/length ratios of wet colon were measured and the tissues were assessed macroscopically, histopathologically, and biochemically via measuring the myeloperoxidase (MPO) activity. Oral RDHE at all doses examined, and the lowest dose of RDVO given p.o. or RDHE administered i.p. reduced all indices of colitis measured in different assays as well as the MPO activity. These results provide encouraging support for the use of hydroalcoholic extract of R. damascena in relieving alimentary inflammatory conditions and reinforce the use of this plant to develop new agents for treating ulcerative colitis. PMID:26779271

  12. Improved Properties of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Produced by Comamonas sp. EB172 Utilizing Volatile Fatty Acids by Regulating the Nitrogen Source

    PubMed Central

    Zakaria, Mohd Rafein; Ariffin, Hidayah; Abd-Aziz, Suraini; Hassan, Mohd Ali; Shirai, Yoshihito

    2013-01-01

    This study presents the effect of carbon to nitrogen ratio (C/N) (mol/mol) on the cell growth and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) accumulation by Comamonas sp. EB172 in 2 L fermenters using volatile fatty acids (VFA) as the carbon source. This VFA was supplemented with ammonium sulphate and yeast extract in the feeding solution to achieve C/N (mol/mol) 5, 15, 25, and 34.4, respectively. By extrapolating the C/N and the source of nitrogen, the properties of the polymers can be regulated. The number average molecular weight (Mn) of P(3HB-co-3HV) copolymer reached the highest at 838 × 103 Da with polydispersity index (PDI) value of 1.8, when the culture broth was supplemented with yeast extract (C/N 34.4). Tensile strength and Young's modulus of the copolymer containing 6–8 mol% 3HV were in the ranges of 13–14.4 MPa and 0.26–0.34 GPa, respectively, comparable to those of polyethylene (PE). Thus, Comamonas sp. EB172 has shown promising bacterial isolates producing polyhydroxyalkanoates from renewable carbon materials. PMID:24106698

  13. An endophyte of Picrorhiza kurroa Royle ex. Benth, producing menthol, phenylethyl alcohol and 3-hydroxypropionic acid, and other volatile organic compounds.

    PubMed

    Qadri, Masroor; Deshidi, Ramesh; Shah, Bhawal Ali; Bindu, Kushal; Vishwakarma, Ram A; Riyaz-Ul-Hassan, Syed

    2015-10-01

    An endophytic fungus, PR4 was found in nature associated with the rhizome of Picrorhiza kurroa, a high altitude medicinal plant of Kashmir Himalayas. The fungus was found to inhibit the growth of several phyto-pathogens by virtue of its volatile organic compounds (VOCs). Molecular phylogeny, based on its ITS1-5.8S-ITS2 ribosomal gene sequence, revealed the identity of the fungus as Phomopsis/Diaporthe sp. This endophyte was found to produce a unique array of VOCs, particularly, menthol, phenylethyl alcohol, (+)-isomenthol, β-phellandrene, β-bisabolene, limonene, 3-pentanone and 1-pentanol. The purification of compounds from the culture broth of PR4 led to the isolation of 3-hydroxypropionic acid (3-HPA) as a major metabolite. This is the first report of a fungal culture producing a combination of biologically and industrially important metabolites—menthol, phenylethyl alcohol, and 3-HPA. The investigation into the monoterpene biosynthetic pathway of PR4 led to the partial characterization of isopiperitenone reductase (ipr) gene, which seems to be significantly distinct from the plant homologue. The biosynthesis of plant-like-metabolites, such as menthol, is of significant academic and industrial significance. This study indicates that PR4 is a potential candidate for upscaling of menthol, phenylethyl alcohol, and 3-HPA, as well as for understanding the menthol/monoterpene biosynthetic pathway in fungi. PMID:26220851

  14. Higher-Level Production of Volatile Fatty Acids In Vitro by Chicken Gut Microbiotas than by Human Gut Microbiotas as Determined by Functional Analyses

    PubMed Central

    Lei, Fang; Yin, Yeshi; Wang, Yuezhu; Deng, Bo; Yu, Hongwei David; Li, Lanjuan; Xiang, Charlie; Wang, Shengyue

    2012-01-01

    The aim of this study was to determine the relationship between the composition and function of gut microbiota. Here, we compared the bacterial compositions and fermentation metabolites of human and chicken gut microbiotas. Results generated by quantitative PCR (qPCR) and 454 pyrosequencing of the 16S rRNA gene V3 region showed the compositions of human and chicken microbiotas to be markedly different, with chicken cecal microbiotas displaying more diversity than human fecal microbiotas. The nutrient requirements of each microbiota growing under batch and chemostat conditions were analyzed. The results showed that chicken cecal microbiotas required simple sugars and peptides to maintain balanced growth in vitro but that human fecal microbiotas preferred polysaccharides and proteins. Chicken microbiotas also produced higher concentrations of volatile fatty acids than did human microbiotas. Our data suggest that the availability of different fermentable substrates in the chicken cecum, which exist due to the unique anatomical structure of the cecum, may provide an environment favorable to the nourishment of microbiotas suited to the production of the higher-energy metabolites required by the bird. Therefore, gut structure, nutrition, immunity, and life-style all contribute to the selection of an exclusive bacterial community that produces types of metabolites beneficial to the host. PMID:22685152

  15. Anti-inflammatory effect of volatile oil and hydroalcoholic extract of Rosa damascena Mill. on acetic acid-induced colitis in rats

    PubMed Central

    Latifi, Ghazal; Ghannadi, Alireza; Minaiyan, Mohsen

    2015-01-01

    Rosa damascena is a small plant belonging to Rosaceae family which has been used for the treatment of some inflammatory diseases and digestive disorders in the Iranian folk medicine. This study was performed to investigate the effect of R. damascena hydroalcoholic extract (RDHE) and R. damascena volatile oil (RDVO) on ulcerative colitis induced by acetic acid in rats. Different doses of RDHE (250, 500, 1000 mg/kg) and RDVO (100, 200, 400 µl/kg) were given orally (p.o.) and doses of RDHE (125, 250, 500 mg/kg) were administrated intraperitoneally (i.p.) to the male Wistar rats (n=6) 2 h before induction of colitis which continued daily for 4 successive days. Prednisolone (4 mg/kg p.o.) and dexamethasone (1 mg/kg i.p.) were used in the reference groups. Weight/length ratios of wet colon were measured and the tissues were assessed macroscopically, histopathologically, and biochemically via measuring the myeloperoxidase (MPO) activity. Oral RDHE at all doses examined, and the lowest dose of RDVO given p.o. or RDHE administered i.p. reduced all indices of colitis measured in different assays as well as the MPO activity. These results provide encouraging support for the use of hydroalcoholic extract of R. damascena in relieving alimentary inflammatory conditions and reinforce the use of this plant to develop new agents for treating ulcerative colitis. PMID:26779271

  16. Volatile and biogenic amines, microbiological counts, and bacterial amino acid decarboxylase activity throughout the salt-ripening process of anchovies (Engraulis encrasicholus).

    PubMed

    Pons-Sánchez-Cascado, S; Veciana-Nogués, M T; Bover-Cid, S; Mariné-Font, A; Vidal-Carou, M C

    2005-08-01

    Chemical and microbiological parameters were studied during the industrial production of salt-ripened anchovies (Engraulis encrasicholus). Gradual acidification and increases in the proteolysis index and in total volatile basic nitrogen were observed. At the end of the maturing process, the values reached pH 5.55 +/- 0.03, 21.33 +/- 5.82%, and 44.06 +/- 12.47 mg/ 100 g, respectively. In the three studied anchovy batches, the biogenic amines tyramine, histamine, putrescine, cadaverine, and agmatine increased during ripening. The highest values were found in the batch where initial microbial load was highest (batch 1), especially for enterobacteria and enterococci. Tyramine was the most abundant amine, reaching values from nondetectable to 90 mg/kg, whereas histamine did not surpass 20 mg/kg. Among the microorganisms isolated, Enterobacter cloacae, Aerococcus viridans, Kocuria varians, and Staphylococcus chromogenes were able to decarboxylate amino acids and produce biogenic amines in vitro. Most (70.59%) of the microorganisms identified were able to produce histamine, 23.53% were able to produce the diamines putrescine and cadaverine, and only 11.76% were able to produce tyramine, although this substance was the major biogenic amine found in anchovy samples. PMID:21132979

  17. Herbs, thyme essential oil and condensed tannin extracts as dietary supplements for broilers, and their effects on performance, digestibility, volatile fatty acids and organoleptic properties.

    PubMed

    Cross, D E; McDevitt, R M; Acamovic, T

    2011-04-01

    1. Herbs, thyme essential oil (EO) and condensed tannin (CT) extracts were compared for their effects, as dietary supplements, on broiler growth performance, nutrient digestibility and volatile fatty acid (VFA) profiles in the gut. Cooked meat from the birds fed on diets with 4 herbs and an EO extract was compared by a taste panel against those fed on the control treatment, for organoleptic properties in the meat. 2. Female broiler chicks were fed on wheat-soybean meal diets from 0-42 d of age. These chicks were given either the basal diet (control), or the basal diet with one of rosemary, garlic or yarrow herbs, mimosa, cranberry or grapeseed CT's, or thyme EO supplements (8 treatments in total). Body weight (BW) and feed consumption (FC) were measured. 3. The garlic supplement tended to improve growth rate over the first 7 d, while mimosa CT and thyme EO supplements reduced weight gains. The mimosa supplement in diets significantly reduced FC to d 21. Meanwhile, the addition of a cranberry supplement reduced the digestibility of DM, OM and N, compared with the controls. Dietary thyme EO, yarrow, rosemary and garlic supplements modified caecal isovaleric and isobutyric acid proportions (presented as 'Other VFA'; p < 0.05). Dietary herb significantly affected the intensity of meat flavour, and the potential of observing both garlic and abnormal flavours. There were large differences between the consumption of red and white meat samples, while meat temperature affected several flavour attributes. 4. Broiler performance and digestibility for birds given dietary garlic and grapeseed CT supplements were similar to the controls, and these supplements appear suitable for dietary inclusion. Careful choices are necessary when selecting dietary plant extract supplements for broilers, but beneficial effects can be observed. PMID:21491246

  18. Endogenously produced hydrogen sulfide is involved in porcine oocyte maturation in vitro.

    PubMed

    Nevoral, Jan; Žalmanová, Tereza; Zámostná, Kateřina; Kott, Tomáš; Kučerová-Chrpová, Veronika; Bodart, Jean-Francois; Gelaude, Armance; Procházka, Radek; Orsák, Matyáš; Šulc, Miloslav; Klein, Pavel; Dvořáková, Markéta; Weingartová, Ivona; Víghová, Aurélia; Hošková, Kristýna; Krejčová, Tereza; Jílek, František; Petr, Jaroslav

    2015-12-01

    Hydrogen sulfide, one of three known gasotransmitters, is involved in physiological processes, including reproductive functions. Oocyte maturation and surrounding cumulus cell expansion play an essential role in female reproduction and subsequent embryonic development. Although the positive effects of exogenous hydrogen sulfide on maturing oocytes are well known, the role of endogenous hydrogen sulfide, which is physiologically released by enzymes, has not yet been described in oocytes. In this study, we observed the presence of Cystathionine β-Synthase (CBS), Cystathionine γ-Lyase (CTH) and 3-Mercaptopyruvate Sulfurtransferase (3-MPST), hydrogen sulfide-releasing enzymes, in porcine oocytes. Endogenous hydrogen sulfide production was detected in immature and matured oocytes as well as its requirement for meiotic maturation. Individual hydrogen sulfide-releasing enzymes seem to be capable of substituting for each other in hydrogen sulfide production. However, meiosis suppression by inhibition of all hydrogen sulfide-releasing enzymes is not irreversible and this effect is a result of M-Phase/Maturation Promoting Factor (MPF) and Mitogen-Activated Protein Kinase (MAPK) activity inhibition. Futhermore, cumulus expansion expressed by hyaluronic acid (HA) production is affected by the inhibition of hydrogen sulfide production. Moreover, quality changes of the expanded cumuli are indicated. These results demonstrate hydrogen sulfide involvement in oocyte maturation as well as cumulus expansion. As such, hydrogen sulfide appears to be an important cell messenger during mammalian oocyte meiosis and adequate cumulus expansion. PMID:26456342

  19. Sulfide detoxification in plant mitochondria.

    PubMed

    Birke, Hannah; Hildebrandt, Tatjana M; Wirtz, Markus; Hell, Rüdiger

    2015-01-01

    In contrast to animals, which release the signal molecule sulfide in small amounts from cysteine and its derivates, phototrophic eukaryotes generate sulfide as an essential intermediate of the sulfur assimilation pathway. Additionally, iron-sulfur cluster turnover and cyanide detoxification might contribute to the release of sulfide in mitochondria. However, sulfide is a potent inhibitor of cytochrome c oxidase in mitochondria. Thus, efficient sulfide detoxification mechanisms are required in mitochondria to ensure adequate energy production and consequently survival of the plant cell. Two enzymes have been recently described to catalyze sulfide detoxification in mitochondria of Arabidopsis thaliana, O-acetylserine(thiol)lyase C (OAS-TL C), and the sulfur dioxygenase (SDO) ethylmalonic encephalopathy protein 1 (ETHE1). Biochemical characterization of sulfide producing and consuming enzymes in mitochondria of plants is fundamental to understand the regulatory network that enables mitochondrial sulfide homeostasis under nonstressed and stressed conditions. In this chapter, we provide established protocols to determine the activity of the sulfide releasing enzyme β-cyanoalanine synthase as well as sulfide-consuming enzymes OAS-TL and SDO. Additionally, we describe a reliable and efficient method to purify OAS-TL proteins from plant material. PMID:25747485

  20. SEMI-VOLATILE ORGANIC ACIDS AND OTHER POLAR COMPOUNDS COLLECTED IN NEW YORK CITY IN RESPONSE TO THE EVENTS OF 9/11

    EPA Science Inventory

    Concentrations of over 25 polar semi-volatile and non-volatile organic compounds were measured in Lower Manhattan, New York using a high capacity Integrated Organic Gas and Particle sampler, after the initial destruction of the World Trade Center. The polar organic compounds in...

  1. Geothermal hydrogen sulfide removal

    SciTech Connect

    Urban, P.

    1981-04-01

    UOP Sulfox technology successfully removed 500 ppM hydrogen sulfide from simulated mixed phase geothermal waters. The Sulfox process involves air oxidation of hydrogen sulfide using a fixed catalyst bed. The catalyst activity remained stable throughout the life of the program. The product stream composition was selected by controlling pH; low pH favored elemental sulfur, while high pH favored water soluble sulfate and thiosulfate. Operation with liquid water present assured full catalytic activity. Dissolved salts reduced catalyst activity somewhat. Application of Sulfox technology to geothermal waters resulted in a straightforward process. There were no requirements for auxiliary processes such as a chemical plant. Application of the process to various types of geothermal waters is discussed and plans for a field test pilot plant and a schedule for commercialization are outlined.

  2. Aspects of the bottom sediment of Lake Nakaumi and Honjo area ~ featuring with organic matter and the Sulfides ~

    NASA Astrophysics Data System (ADS)

    Shinohara, R.

    2015-12-01

    Lake Nakaumi is a brackish water located at southwest Japan. Seawater from the Sea of Japan inflows through Sakai-strait, and river water flows through the Oohashi River into this lake. Lake Nakaumi is characterized with hypoxic and/or anoxic condition of bottom water derived with the distinct stratification of salinity in summer season. In this lake, a public project had been carried out for land reclamation since 1963. Honjo Area located to the north part of Lake Nakaumi, was semi-separated from Lake Nakaumi by reclamation dikes constructed for this project at 1981. However, this public project was aborted with the change of social conditions. To the effective utilization of the area, the partial removal of dike was carried out. Seawater from Sakai-strait flows directly into Honjo Area again. Environmental change of the lake is expected by this inflow of the seawater in Lake Nakaumi and Honjo Area after this restoration. It is well known that the surface sediment reflects the environment of lake bottom. The organic matter and the sulfides in sediment are good indicators of sedimentation environment. In this study, we analyzed them by several methods and grasped the bottom environment of both areas after the removal of dikes. We examined the impact of the restoration to both areas by comparing the observations with the past data. Surface sediment samples in Lake Nakaumi and Honjo Area were obtained at 77 and 40 stations, respectively. We collected surface sediment (about 1cm) were for each station, and analyzed total organic carbon (TOC) and total nitrogen (TN) as organic matter, and hydrogen sulfide (H2S) in pore water, total sulfide (TS) and acid volatile sulfide (AVS) as sulfides. TOC contents of Lake Nakaumi and Honjo Area range within 0.0-5.1% and 0.2-4.9%, respectively. TN contents range within 0.0-0.6 % and 0.1-0.6 %. TS contents range within 0.1-2.6% and 0.0-2.0 %. H2S contents range within 0.3-119.0 ppm and 0.5-140.4 ppm. AVS contents range within 0

  3. Scalping of light volatile sulfur compounds by wine closures.

    PubMed

    Silva, Maria A; Jourdes, Michaël; Darriet, Philippe; Teissedre, Pierre-Louis

    2012-11-01

    Closures have an important influence on wine quality during aging in a bottle. Closures have a direct impact on oxygen exposure and on volatiles scavenging in wine. Model wine solution soaking assays of several types of closures (i.e., natural and technical cork stoppers, synthetic closures, screw caps) with two important wine volatile sulfur compounds led to a considerable reduction in their levels. After 25 days, cork closures and synthetic closures, to a lesser extent, have significantly scavenged hydrogen sulfide and dimethyl sulfide. These compounds have a determinant impact on wine aging bouquet, being largely responsible for "reduced off-flavors". Hydrogen sulfide levels are often not well correlated with the exposure of wine to oxygen or with the permeability of the closure. Its preferential sorption by some types of closures may explain that behavior. Scalping phenomenon should be taken into account when studying wine post-bottling development. PMID:23072649

  4. Venus: Halide cloud condensation and volatile element inventories

    NASA Technical Reports Server (NTRS)

    Lewis, J. S.; Fegley, B., Jr.

    1982-01-01

    Several Venus cloud condensates, including A12C16 as well as halides, oxides and sulfides of arsenic and antimony, are assessed for their thermodynamic and geochemical plausibility. Aluminum chloride can confidently be ruled out, and condensation of arsenic sulfides on the surface will cause arsenic compounds to be too rare to produce the observed clouds. Antimony may conceivably be sufficiently volatile, but the expected molecular form is gaseous SbS, not the chloride. Arsenic and antimony compounds in the atmosphere will be regulated at very low levels by sulfide precipitation, irrespective of the planetary inventory of As and Sb. Thus the arguments for a volatile-deficient origin for Venus based on the depletion of water and mercury (relative to Earth) cannot be tested by a search for atmospheric arsenic or antimony.

  5. Rumen morphometrics and the effect of digesta pH and volume on volatile fatty acid absorption.

    PubMed

    Melo, L Q; Costa, S F; Lopes, F; Guerreiro, M C; Armentano, L E; Pereira, M N

    2013-04-01

    The effects of rumen digesta volume and pH on VFA absorption and its relation to rumen wall morphology were evaluated. Nine rumen cannulated cows formed 3 groups based on desired variation in rumen morphology: The High group was formed by Holsteins yielding 25.9 kg milk/d and fed on a high-grain total mixed ration (TMR); the Medium group by Holstein-Zebu crossbreds yielding 12.3 kg milk/d and fed on corn silage, tropical pasture, and a commercial concentrate; and the Dry group by nonlactating grazing Jerseys fed exclusively on tropical pasture. Within each group, a sequence of 3 ruminal conditions was induced on each cow in 3 × 3 Latin Squares, with 7-d periods: high digesta volume and high pH (HVHP), low volume and high pH (LVHP), and low volume and low pH (LVLP). Rumen mucosa was biopsied on the first day of Period 1. Ruminal morphometric variables evaluated were mitotic index, absorptive surface and papillae number per square centimeter of wall, area per papillae, papillae area as a percentage of absorptive surface, and epithelium, keratinized layer, and nonkeratinized layer thickness. There was marked variation in rumen morphology among the groups of cows. Grazing Jerseys had decreased rumen wall absorptive surface area and basal cells mitotic index, and increased thickness of the epithelium and of the keratin layer compared with cows receiving concentrates. Mean rumen pH throughout the 4 h sampling period was: 6.78 for HVHP, 7.08 for LVHP, and 5.90 for LVLP (P < 0.01). The capacity of the rumen wall to absorb VFA was estimated by the Valerate/CrEDTA technique. The fractional exponential decay rate for the ratio of valeric acid to Cr (k Val/Cr) was determined by rumen digesta sampling at 20-min intervals during 4 h, after the mixing of markers and the return of the evacuated ruminal content. The k Val/Cr values for treatments HVHP, LVHP, and LVLP were, respectively: 19.6, 23.9, and 35.0 %/h (SEM = 2.01; P = 0.21 for contrast HVHP vs. LVHP and P < 0.01 for

  6. Bioavailability and stability of mercury sulfide in Armuchee (USA) soil

    SciTech Connect

    Han, Fengxiang; Shiyab, Safwan; Su, Yi; Monts, David L.; Waggoner, Charles A.; Matta, Frank B.

    2007-07-01

    Because of the adverse effects of elemental mercury and mercury compounds upon human health, the U.S. Department of Energy (DOE) is engaged in an on-going effort to monitor and remediate mercury-contaminated DOE sites. In order to more cost effectively implement those extensive remediation efforts, it is necessary to obtain an improved understanding of the role that mercury and mercury compounds play in the ecosystem. We have conducted pilot scale experiments to study the bioavailability of mercury sulfide in an Armuchee (eastern US ) soil. The effects of plants and incubation time on chemical stability and bioavailability of HgS under simulated conditions of the ecosystem have been examined, as has the dynamics of the dissolution of mercury sulfide by various extractants. The results show that mercury sulfide in contaminated Armuchee soil was still to some extent bioavailable to plants. After planting, soil mercury sulfide is more easily dissolved by both 4 M and 12 M nitric acid than pure mercury sulfide reagent. Dissolution kinetics of soil mercury sulfide and pure chemical reagent by nitric acid are different. Mercury release by EDTA from HgS-contaminated soil increased with time of reaction and soil mercury level. Chelating chemicals increase the solubility and bioavailability of mercury in HgS-contaminated soil. (authors)

  7. Acid-labile sulfides in shallow marine bottom sediments: A review of the impact on ecosystems in the Azov Sea, the NE Black Sea shelf and NW Adriatic lagoons

    NASA Astrophysics Data System (ADS)

    Sorokin, Yu. I.; Zakuskina, O. Yu

    2012-02-01

    Acid-labile sulfides (LS) increase in bottom sediments at sites in the Azov Sea, at the NE Black Sea shelf and in the coastal lagoons of NW Adriatic Sea experiencing direct impacts of anthropogenic pollution. Fresh anthropogenic organic matter stimulates the bacterial sulfate reduction and here the rate of the LS production overcomes their loss during the oxidation and pyritization. This results in the expansion of reduced sediment layer up to the bottom surface. The LS concentration in the reduced sediments varies between 300 and 2000 mg S l -1 of wet silt depending on the size of pollution loading and on the rate of sedimentation. In the oxidized sediments away from the direct pollution impact, the LS concentration did not exceed 100-150 mg S l -1. Being a strong cytochrome toxin, the LS adversely affect the coastal ecosystems. The concentrations over 600 mg S l -1 result in quasi total benthic mortality whereas >300-400 mg S l -1 depletes the benthic faunal abundance and taxonomic diversity. Accumulation of the LS in sediments also induces nocturnal hypoxia and stimulates domination of toxic cyanobacteria in the pelagic phytocenoses.

  8. Improved volatile fatty acids anaerobic production from waste activated sludge by pH regulation: Alkaline or neutral pH?

    PubMed

    Ma, Huijun; Chen, Xingchun; Liu, He; Liu, Hongbo; Fu, Bo

    2016-02-01

    In this study, the anaerobic fermentation was carried out for volatile fatty acids (VFAs) production at different pH (between 7.0 and 10.0) conditions with untreated sludge and heat-alkaline pretreated waste activated sludge. In the fermentation with untreated sludge, the extent of hydrolysis of organic matters and extent of acidification at alkaline pH are 54.37% and 30.37%, respectively, resulting in the highest VFAs yield at 235.46mg COD/gVS of three pH conditions. In the fermentation with heat-alkaline pretreated sludge, the acidification rate and VFAs yield at neutral pH are 30.98% and 240.14mg COD/gVS, respectively, which are higher than that at other pH conditions. With the glucose or bovine serum albumin as substrate for VFAs production, the neutral pH showed a higher VFAs concentration than the alkaline pH condition. The results of terminal restriction fragment length polymorphism (T-RFLP) analysis indicated that the alkaline pH caused low microbial richness. Based on the results in this study, we demonstrated that the alkaline pH is favor of hydrolysis of organic matter in sludge while neutral pH improved the acidogenesis for the VFAs production from sludge. Our finding is obvious different to the previous research and helpful for the understanding of how heat-alkaline pretreatment and alkaline fermentation influence the VFAs production, and beneficial to the development of VFAs production process. PMID:26652215

  9. Role of Nitric Oxide and Hydrogen Sulfide in the Vasodilator Effect of Ursolic Acid and Uvaol from Black Cherry Prunus serotina Fruits.

    PubMed

    Luna-Vázquez, Francisco J; Ibarra-Alvarado, César; Rojas-Molina, Alejandra; Romo-Mancillas, Antonio; López-Vallejo, Fabián H; Solís-Gutiérrez, Mariana; Rojas-Molina, Juana I; Rivero-Cruz, Fausto

    2016-01-01

    The present research aimed to isolate the non-polar secondary metabolites that produce the vasodilator effects induced by the dichloromethane extract of Prunus serotina (P. serotina) fruits and to determine whether the NO/cGMP and the H2S/KATP channel pathways are involved in their mechanism of action. A bioactivity-directed fractionation of the dichloromethane extract of P. serotina fruits led to the isolation of ursolic acid and uvaol as the main non-polar vasodilator compounds. These compounds showed significant relaxant effect on rat aortic rings in an endothelium- and concentration-dependent manner, which was inhibited by NG-nitro-L-arginine methyl ester (L-NAME), DL-propargylglycine (PAG) and glibenclamide (Gli). Additionally, both triterpenes increased NO and H2S production in aortic tissue. Molecular docking studies showed that ursolic acid and uvaol are able to bind to endothelial NOS and CSE with high affinity for residues that form the oligomeric interface of both enzymes. These results suggest that the vasodilator effect produced by ursolic acid and uvaol contained in P. serotina fruits, involves activation of the NO/cGMP and H2S/KATP channel pathways, possibly through direct activation of NOS and CSE. PMID:26771591

  10. Hydrogen sulfide intoxication.

    PubMed

    Guidotti, Tee L

    2015-01-01

    Hydrogen sulfide (H2S) is a hazard primarily in the oil and gas industry, agriculture, sewage and animal waste handling, construction (asphalt operations and disturbing marshy terrain), and other settings where organic material decomposes under reducing conditions, and in geothermal operations. It is an insoluble gas, heavier than air, with a very low odor threshold and high toxicity, driven by concentration more than duration of exposure. Toxicity presents in a unique, reliable, and characteristic toxidrome consisting, in ascending order of exposure, of mucosal irritation, especially of the eye ("gas eye"), olfactory paralysis (not to be confused with olfactory fatigue), sudden but reversible loss of consciousness ("knockdown"), pulmonary edema (with an unusually favorable prognosis), and death (probably with apnea contributing). The risk of chronic neurcognitive changes is controversial, with the best evidence at high exposure levels and after knockdowns, which are frequently accompanied by head injury or oxygen deprivation. Treatment cannot be initiated promptly in the prehospital phase, and currently rests primarily on supportive care, hyperbaric oxygen, and nitrite administration. The mechanism of action for sublethal neurotoxicity and knockdown is clearly not inhibition of cytochrome oxidase c, as generally assumed, although this may play a role in overwhelming exposures. High levels of endogenous sulfide are found in the brain, presumably relating to the function of hydrogen sulfide as a gaseous neurotransmitter and immunomodulator. Prevention requires control of exposure and rigorous training to stop doomed rescue attempts attempted without self-contained breathing apparatus, especially in confined spaces, and in sudden release in the oil and gas sector, which result in multiple avoidable deaths. PMID:26563786

  11. The Determination of Hydrogen Sulfide in Stack Gases, Iodometric Titration After Sulfite Removal.

    ERIC Educational Resources Information Center

    Robles, E. G.

    The determination of hydrogen sulfide in effluents from coal-fired furnaces and incinerators is complicated by the presence of sulfur oxides (which form acids). Organic compounds also may interfere with or prevent the formation of the cadmium sulfide precipitate or give false positive results because of reaction with iodine. The report presents a…

  12. Dual-channel optical sensing platform for detection of diminazene aceturate based on thioglycolic acid-wrapped cadmium telluride/cadmium sulfide quantum dots.

    PubMed

    Hao, Chenxia; Zhou, Tao; Liu, Shaopu; Wang, Linlin; Huang, Bowen; Kuang, Nianxi; He, Youqiu

    2016-06-15

    A dual-channel optical sensing platform which combines the advantages of dual-wavelength overlapping resonance Rayleigh scattering (DWO-RRS) and fluorescence has been designed for the detection of diminazene aceturate (DA). It is based on the use of thioglycolic acid-wrapped CdTe/CdS quantum dots (Q-dots). In the absence of DA, the thioglycolic acid-wrapped CdTe/CdS Q-dots exhibit the high fluorescence spectrum and low RRS spectrum, so are selected to develop an easy-to-get system. In the presence of DA, the thioglycolic acid-wrapped CdTe/CdS Q-dots and DA form a complex through electrostatic interaction, which result in the RRS intensity getting enhanced significantly with new RRS peaks appearing at 317 and 397nm; the fluorescence is powerfully quenched. Under optimum conditions, the scattering intensities of the two peaks are proportional to the concentration of DA in the range of 0.0061-3.0μgmL(-1). The detection limits for the two single peaks are 4.1ngmL(-1) and 3.3ngmL(-1), while that of the DWO-RRS method is 1.8ngmL(-1), indicating that the DWO-RRS method has high sensitivity. Besides, the fluorescence also exhibits good linear range from 0.0354 to 10.0μgmL(-1) with a detection limit of 10.6ngmL(-1). In addition, the system has been applied to the detection of DA in milk samples with satisfactory results. PMID:27016631

  13. Qualitative and quantitative analysis of volatile constituents from latrines.

    PubMed

    Lin, Jianming; Aoll, Jackline; Niclass, Yvan; Velazco, Maria Inés; Wünsche, Laurent; Pika, Jana; Starkenmann, Christian

    2013-07-16

    More than 2.5 billion people defecate in the open. The increased commitment of private and public organizations to improving this situation is driving the research and development of new technologies for toilets and latrines. Although key technical aspects are considered by researchers when designing new technologies for developing countries, the basic aspect of offending malodors from human waste is often neglected. With the objective of contributing to technical solutions that are acceptable to global consumers, we investigated the chemical composition of latrine malodors sampled in Africa and India. Field latrines in four countries were evaluated olfactively and the odors qualitatively and quantitatively characterized with three analytical techniques. Sulfur compounds including H2S, methyl mercaptan, and dimethyl-mono-(di;tri) sulfide are important in sewage-like odors of pit latrines under anaerobic conditions. Under aerobic conditions, in Nairobi for example, paracresol and indole reached concentrations of 89 and 65 μg/g, respectively, which, along with short chain fatty acids such as butyric acid (13 mg/g) explained the strong rancid, manure and farm yard odor. This work represents the first qualitative and quantitative study of volatile compounds sampled from seven pit latrines in a variety of geographic, technical, and economic contexts in addition to three single stools from India and a pit latrine model system. PMID:23829328

  14. Mineralogy of the hardpan formation processes in the interface between sulfide-rich sludge and fly ash: Applications for acid mine drainage mitigation

    SciTech Connect

    Perez-Lopez, R.; Nieto, J.M.; Alvarez-Valero, A.M.; De Almodovar, G.R.

    2007-11-15

    In the present study, experiments in non-saturated leaching columns were conducted to characterize the neoformed phases that precipitate at the interface between two waste residues having different chemical characteristics: an acid mine drainage producer residue (i.e., pyritic sludge) and an acidity neutralizer residue (i.e., coal combustion fly ash). A heating source was placed on top of one of the columns to accelerate oxidation and precipitation of newly formed phases, and thus, to observe longer-scale processes. When both residues are deposited together, the resulting leachates are characterized by alkaline pH, and low sulfate and metal concentrations. Two mechanisms help to improve the quality of the leachates. Over short-time scales, the leaching of pyrite at high pH (as a consequence of fly ash addition) favors the precipitation of ferrihydrite, encapsulating the pyrite grains and attenuating the oxidation process. Over longer time scales, a hardpan is promoted at the interface between both residues due to the precipitation of ferrihydrite, jarosite, and a Ca phase-gypsum or aragonite, depending on carbonate ion activity. Geochemical modeling of leachates using PHREEQC software predicted supersaturation in the observed minerals. The development of a relatively rigid crust at the interface favors the isolation of the mining waste from weathering processes, helped by the cementation of fly ash owing to aragonite precipitation, which ensures total isolation and neutralization of the mine residues.

  15. Volatile emissions during storing of green food waste under different aeration conditions.

    PubMed

    Agapiou, A; Vamvakari, J P; Andrianopoulos, A; Pappa, A

    2016-05-01

    Controlled field experiments were carried out for monitoring the emissions of three plastic commercial household waste bins, which were adapted for studying the effect of aeration process in the evolved volatiles, during house storing of green food waste for 2 weeks, prior to collection. Three experimental scenarios were examined based on no aeration ("NA," closed commercial waste bin), diffusion-based aeration ("DA," closed commercial waste bin with tiny holes), and enforced aeration ("EA," closed commercial waste bin with tiny holes and enforced aeration). The monitoring of volatile organic compounds (VOCs) emitted from organic household kitchen waste was performed using solid-phase microextraction-gas chromatography-mass spectrometry (SPME-GC-MS) analysis. Portable sensors were also used for monitoring selected gases and parameters of environmental, bioprocess, and health interest (e.g., CO2, O2, H2S, CH4, NH3, % RH, waste temperatures). VOC emissions are strongly dependent on the waste material. The most frequent VOCs identified over the storing waste, showing over 50 % appearance in all examined samples, were terpenes (e.g., di-limonene, beta-myrcene, delta-3-carene, alpha-pinene, alpha-terpinolene, linalool, etc.), sulfides (dimethyl disulfide), aromatics (benzene, 1-methyl-2-(2-propenyl)), alkanes (e.g., decane, dodecane), ketones (2-propanone), esters (e.g., acetic acid ethyl ester, acetic acid methyl ester), and alcohols (e.g., 3-cyclohexen-1-ol, 4-methyl-1-(1-methylethyl)). The prominent role of terpenes in the "pre-compost" odor and especially that of di-limonene was highlighted. In all examined scenarios, the emitted volatiles were increased at raised temperatures and later decreased in time. Aeration of waste bins slightly affected the volatilization process resulting in higher profiles of VOCs; uniformity in the composition of VOCs was also noted. Slight modifications of commercial waste bins may favor the initiation of home composting. PMID

  16. Measurement, analysis, and modeling of hydrogen sulfide emissions from a swine facility in North Carolina

    NASA Astrophysics Data System (ADS)

    Blunden, Jessica

    Annual global source contributions of sulfur compounds to the natural atmospheric environment are estimated to be 142 x 106 tons. Although not quantified, volatilization from animal wastes may be an important source of gaseous reduced sulfur compounds. Hydrogen sulfide (H2S) is a colorless gas emitted during decomposition of hog manure that produces an offensive "rotten egg" odor. Once released into the atmosphere, H 2S is oxidized and the eventual byproduct, sulfuric acid, may combine with other atmospheric constituents to form aerosol products such as ammonium bisulfate and ammonium sulfate. In recent years, confined animal feeding operations (CAFOs) have increased in size, resulting in more geographically concentrated areas of animals and, subsequently, animal waste. In North Carolina and across the southeastern United States anaerobic waste treatment lagoons are traditionally used to store and treat hog excreta at commercial hog farms. Currently, no state regulations exist for H2S gaseous emissions from animal production facilities in North Carolina and the amount of H2S being emitted into the atmosphere from these potential sources is widely unknown. In response to the need for data, this research initiative has been undertaken in an effort to quantify emissions of H2S from swine CAFOs. An experimental study was conducted at a commercial swine farm in eastern North Carolina to measure hydrogen sulfide emissions from a hog housing unit utilizing a mechanical fan ventilation system and from an on-site waste storage treatment lagoon. A dynamic flow-through chamber system was employed to make lagoon flux measurements. Semi-continuous measurements were made over a one-year period (2004-2005) for a few days during each of the four predominant seasons in order to assess diurnal and temporal variability in emissions. Fan rpm from the barn was continuously measured and flow rates were calculated in order to accurately assess gaseous emissions from the system

  17. Photooxidation of methyl sulfide, ethyl sulfide, and methanethiol

    SciTech Connect

    Grosjean, D.

    1984-06-01

    Products of sunlight-irradiated mixtures of oxides of nitrogen and alkyl sulfides (RSR, R = CH/sub 3/, C/sub 2/H/sub 5/) and methanethiol (CH/sub 3/SH) in air include formaldehyde (R = CH/sub 3/), acetaldehyde and PAN (R = C/sub 2/H/sub 5/), sulfur dioxide, and alkyl nitrates (RONO/sub 2/) as well as particulate alkanesulfonic acids (RSO/sub 2/OH) and inorganic sulfate. The nature and yields of gaseous and particulate products are discussed in terms of OH-initiated reaction pathways, including C-S bond scission, and subsequent reactions of alkythiyl radicals (RS), including those leading to photolabile RSNO and stable RSNO/sub 2/ products for which indirect evidence is presented. SO/sub 2/ yields are found to vary according to the relative importance of the competing pathways RS + O/sub 2/ (a) and RS + NO/sub 2/ (b), for which a ratio k/sub b/ / k/sub a/ approx. 2 x 10/sup 6/ is derived from data for irradiated RSR-NO/sub x/, RSH-Cl/sub 2/, and RSH-Cl/sub 2/-NO/sub 2/ mixtures.

  18. Spectral-IP Characteristics of Bacterial Activity on Sulfide Mineral Surfaces: Implications for Detection and Environmental Impact Assessment of Acid Mine Drainage.

    NASA Astrophysics Data System (ADS)

    Blackmore, S. R.; Southam, G.; Katsube, J.

    2004-12-01

    Spectral induced polarization (IP) measurements were carried out, over a frequency range of 1.0-106 Hz, on pyrite crystal surfaces colonized by thiobacilli at different growth stages and in `sedimentary systems' with different pyrite-quartz ratios. The purpose was to determine if these varied pyrite-bacteria conditions are reflected in the spectral-IP responses and whether IP, as a geophysical tool, is able to detect and assess the potential for acid mine drainage due to bacterial activity. The study used an Acidithiobacillus ferrooxidans subspecies, isolated from the Kam Kotia mine tailings, Timmins, Ontario, using limiting dilutions in 9K buffer medium (pH 3; (NH4)2SO4, 0.4 g; K2HPO4, 0.1 g; MgSO47H2O, 0.1 g) supplemented with 3.3 g/L of filter sterilized FeSO47H2O as their energy source. Duplicate syringe columns experiments were prepared using varying concentrations of acid-washed silica and/or pyrite (simulating either disseminated or stratified pyritic ore) and colonized with thiobacilli. All columns were maintained under saturating conditions with circumneutral 9K buffer. Each column began with an acidic pH and became more alkaline over the 2-month experiment, typically ending close to the circumneutral pH of the media. The spectral-IP measurements responded directly to bacterial activity, i.e., changes in impedance were observed in all samples. Samples that contained bacteria were higher in impedance (with significant differences observed between frequencies of 10-100000Hz). Over time, scanning electron microscopy revealed increases in the bacterial corrosion surface area, bacterial ferric-sulfate encasement, the number of bacteria colonies and abundance of ferric precipitates. Bacterially induced mineralization was observed as patches in all systems. In the disseminated and stratified environments, the patches covered 8-10% of the grains, predominantly along the fractured mineral edges. In the `massive' 100% pyrite systems, bacteria-mineral patches covered

  19. Floral volatiles: from biosynthesis to function.

    PubMed

    Muhlemann, Joëlle K; Klempien, Antje; Dudareva, Natalia

    2014-08-01

    Floral volatiles have attracted humans' attention since antiquity and have since then permeated many aspects of our lives. Indeed, they are heavily used in perfumes, cosmetics, flavourings and medicinal applications. However, their primary function is to mediate ecological interactions between flowers and a diverse array of visitors, including pollinators, florivores and pathogens. As such, they ultimately ensure the plants' reproductive and evolutionary success. To date, over 1700 floral volatile organic compounds (VOCs) have been identified. Interestingly, they are derived from only a few biochemical networks, which include the terpenoid, phenylpropanoid/benzenoid and fatty acid biosynthetic pathways. These pathways are intricately regulated by endogenous and external factors to enable spatially and temporally controlled emission of floral volatiles, thereby fine-tuning the ecological interactions facilitated by floral volatiles. In this review, we will focus on describing the biosynthetic pathways leading to floral VOCs, the regulation of floral volatile emission, as well as biological functions of emitted volatiles. PMID:24588567

  20. Organic Sulfur Gas Production in Sulfidic Caves

    NASA Astrophysics Data System (ADS)

    Stern, L. A.; Engel, A. S.; Bennett, P. C.

    2001-12-01

    Lower Kane Cave, Big Horn Basin, WY, permits access to an environment where anaerobic sulfide-rich groundwater meets the aerobic vadose zone. At this interface microorganisms thrive on diverse metabolic pathways including autotrophic sulfur oxidation, sulfate reduction, and aerobic heterotrophy. Springs introduce groundwater rich in H2S to the cave where it both degasses into the cave atmosphere and is used by chemautotrophic sulfur oxidizing bacteria in the cave spring and stream habitat. The cave atmosphere in the immediate vicinity of the springs has elevated levels of CO2, H2S and methane, mirroring the higher concentration of H2S and methane in the spring water. The high CO2 concentrations are attenuated toward the two main sources of fresh air, the cave entrance and breathing holes at the rear of the cave. Conventional toxic gas monitors permit estimations of H2S concentrations, but they have severe cross sensitivity with other reduced sulfur gases, and thus are inadequate for characterization of sulfur cave gases. However employment of a field-based GC revealed elevated concentrations of carbonyl sulfide in cave atmosphere. Cultures of microorganisms collected from the cave optimized for enriching fermenters and autotrophic and heterophic sulfate reducing bacteria each produced carbonyl sulfide suggesting a biogenic in origin of the COS in addition to H2S. Enrichment cultures also produced methanethiol (methyl mercaptan) and an additional as yet undetermined volatile organic sulfur compound. In culture, the organo-sulfur compounds were less abundant than H2S, whereas in the cave atmosphere the organo-sulfur compounds were the dominant sulfur gases. Thus, these organo-sulfur gases may prove to be important sources of both reduced sulfur and organic carbon to microorganisms living on the cave wall in a subaerial habitat. Moreover groundwater has not yet been recognized as a source of sulfur gases to the atmosphere, but with the abundance of sulfidic

  1. Influence of reactive sulfide (AVS) and supplementary food on Ag, Cd and Zn bioaccumulation in the marine polychaete Neanthes arenaceodentata

    USGS Publications Warehouse

    Lee, J.-S.; Lee, B.-G.; Yoo, H.; Koh, C.-H.; Luoma, S.N.

    2001-01-01

    A laboratory bioassay determined the relative contribution of various pathways of Ag, Cd and Zn bioaccumulation in the marine polychaete Neanthes arenaceodentata exposed to moderately contaminated sediments. Juvenile worms were exposed for 25 d to experimental sediments containing 5 different reactive sulfide (acid volatile sulfides, AVS) concentrations (1 to 30 ??mol g-1), but with constant Ag, Cd, and Zn concentrations of 0.1, 0.1 and 7 ??mol g-1, respectively. The sediments were supplemented with contaminated food (TetraMin??) containing 3 levels of Ag-Cd-Zn (uncontaminated, 1?? or 5??1 metal concentrations in the contaminated sediment). The results suggest that bioaccumulation of Ag, Cd and Zn in the worms occurred predominantly from ingestion of contaminated sediments and contaminated supplementary food. AVS or dissolved metals (in porewater and overlying water) had a minor effect on bioaccumulation of the 3 metals in most of the treatments. The contribution to uptake from the dissolved source was most important in the most oxic sediments, with maximum contributions of 8% for Ag, 30% for Cd and 20% for Zn bioaccumulation. Sediment bioassays where uncontaminated supplemental food is added could seriously underestimate metal exposures in an equilibrated system; N. arenaceodentata feeding on uncontaminated food would be exposed to 40-60% less metal than if the food source was equilibrated (as occurs in nature). Overall, the results show that pathways of metal exposure are dynamically linked in contaminated sediments and shift as external geochemical characteristics and internal biological attributes vary.

  2. Sulfide Mineral Surfaces

    SciTech Connect

    Rosso, Kevin M.; Vaughan, David J.

    2006-08-01

    The past twenty years or so have seen dramatic development of the experimental and theoretical tools available to study the surfaces of solids at the molecular (?atomic resolution?) scale. On the experimental side, two areas of development well illustrate these advances. The first concerns the high intensity photon sources associated with synchrotron radiation; these have both greatly improved the surface sensitivity and spatial resolution of already established surface spectroscopic and diffraction methods, and enabled the development of new methods for studying surfaces. The second centers on the scanning probe microscopy (SPM) techniques initially developed in the 1980's with the first scanning tunneling microscope (STM) and atomic force microscope (AFM) experiments. The direct 'observation' of individual atoms at surfaces made possible with these methods has truly revolutionized surface science. On the theoretical side, the availability of high performance computers coupled with advances in computational modeling has provided powerful new tools to complement the advances in experiment. Particularly important have been the quantum mechanics based computational approaches such as density functional theory (DFT), which can now be easily used to calculate the equilibrium crystal structures of solids and surfaces from first principles, and to provide insights into their electronic structure. In this chapter, we review current knowledge of sulfide mineral surfaces, beginning with an overview of the principles relevant to the study of the surfaces of all crystalline solids. This includes the thermodynamics of surfaces, the atomic structure of surfaces (surface crystallography and structural stability, adjustments of atoms at the surface through relaxation or reconstruction, surface defects) and the electronic structure of surfaces. We then discuss examples where specific crystal surfaces have been studied, with the main sulfide minerals organized by structure type

  3. Volatile fatty acids (VFAs) production from swine manure through short-term dry anaerobic digestion and its separation from nitrogen and phosphorus resources in the digestate.

    PubMed

    Huang, Weiwei; Huang, Wenli; Yuan, Tian; Zhao, Ziwen; Cai, Wei; Zhang, Zhenya; Lei, Zhongfang; Feng, Chuanping

    2016-03-01

    The sustainability of an agricultural system depends highly upon the recycling of all useful substances from agricultural wastes. This study explored the feasibility of comprehensive utilization of C, N and P resources in swine manure (SM) through short-term dry anaerobic digestion (AD) followed by dry ammonia stripping, aiming at achieving (1) effective total volatile fatty acids (VFAs) production and separation; (2) ammonia recovery from the digestate; and (3) preservation of high P bioavailability in the solid residue for further applications. Specifically, two ammonia stripping strategies were applied and compared in this work: (I) ammonia stripping was directly performed with the digestate from dry AD of SM (i.e. dry ammonia stripping); and (II) wet ammonia stripping was conducted by using the resultant filtrate from solid-liquid separation of the mixture of digestate and added water. Results showed that dry AD of the tested SM at 55 °C, 20% TS and unadjusted initial pH (8.6) for 8 days produced relatively high concentrations of total VFAs (94.4 mg-COD/g-VS) and ammonia-N (20.0 mg/g-VS) with high potentially bioavailable P (10.6 mg/g-TS) remained in the digestate, which was considered optimal in this study. In addition, high ammonia removal efficiencies of 96.2% and 99.7% were achieved through 3 h' dry and wet stripping (at 55 °C and initial pH 11.0), respectively, while the total VFAs concentration in the digestate/filtrate remained favorably unchanged. All experimental data from the two stripping processes well fitted to the pseudo first-order kinetic model (R(2) = 0.9916-0.9997) with comparable theoretical maximum ammonia removal efficiencies (Aeq, >90%) being obtained under the tested dry and wet stripping conditions, implying that the former was more advantageous due to its much higher volumetric total ammonia-N removal rate thus much smaller reactor volume, less energy/chemicals consumption and no foaming problems. After 8 days' dry AD and 3

  4. Short communication: Comparison of pH, volatile fatty acids, and microbiome of rumen samples from preweaned calves obtained via cannula or stomach tube.

    PubMed

    Terré, M; Castells, L; Fàbregas, F; Bach, A

    2013-08-01

    The objective of this study was to compare rumen samples from young dairy calves obtained via a stomach tube (ST) or a ruminal cannula (RC). Five male Holstein calves (46±4.0 kg of body weight and 11±4.9 d of age) were ruminally cannulated at 15 d of age. Calves received 4 L/d of a commercial milk replacer (25% crude protein and 19.2% fat) at 12.5% dry matter, and were provided concentrate and chopped oats hay ad libitum throughout the study (56 d). In total, 29 paired rumen samples were obtained weekly throughout the study in most of the calves by each extraction method. These samples were used to determine pH and volatile fatty acids (VFA) concentration, and to quantify Prevotella ruminicola and Streptococcus bovis by quantitative PCR. Furthermore, a denaturing gradient gel electrophoresis was performed on rumen samples harvested during wk 8 of the study to determine the degree of similarity between rumen bacteria communities. Rumen pH was 0.30 units greater in ST compared with RC samples. Furthermore, total VFA concentrations were greater in RC than in ST samples. However, when analyzing the proportion of each VFA by ANOVA, no differences were found between the sampling methods. The quantification of S. bovis and P. ruminicola was similar in both extraction methods, and values obtained using different methods were highly correlated (R(2)=0.89 and 0.98 for S. bovis and P. ruminicola, respectively). Fingerprinting analysis showed similar bacteria band profiles between samples obtained from the same calves using different extraction methods. In conclusion, when comparing rumen parameters obtained using different sampling techniques, it is recommended that VFA profiles be used rather than total VFA concentrations, as total VFA concentrations are more affected by the method of collection. Furthermore, although comparisons of pH across studies should be avoided when samples are not obtained using the same sampling method, the comparison of fingerprinting of a

  5. Inclusion of psyllium in milk replacer for neonatal calves. 2. Effects on volatile fatty acid concentrations, microbial populations, and gastrointestinal tract size.

    PubMed

    Cannon, S J; Fahey, G C; Pope, L L; Bauer, L L; Wallace, R L; Miller, B L; Drackley, J K

    2010-10-01

    Fermentable fibers such as psyllium increase volatile fatty acid (VFA) concentrations in the lower digestive tract and increase the gastrointestinal tract (GIT) mass of many mammals. We reasoned that psyllium inclusion in milk replacer might produce similar effects in neonatal dairy calves, which could lead to improved growth and health. Male Holstein calves were fed a milk replacer (22% crude protein, 20% fat) either without or with psyllium (1.1% of dry matter, DM) from 2 d through 28 d of age. Milk replacer was reconstituted to 12.5% DM and fed at 12% of calf body weight, adjusted weekly. Water was offered ad libitum but no starter was fed. Three calves per treatment were harvested weekly to sample digesta from the reticulo-rumen, abomasum, jejunum, proximal colon, and distal colon, and to determine length and mass of GIT components. Psyllium in milk replacer increased the proportion of butyrate in reticulo-rumen contents from 2.4 to 3.2% of total but did not affect total VFA concentrations. Total VFA concentrations were very low in the jejunum but psyllium tended to increase total VFA, acetate, and valerate concentrations; valerate accounted for 15.9 and 16.7% of total VFA (molar basis) for control and psyllium calves, respectively. Psyllium increased total VFA concentrations in the proximal and distal colon by 104.4 and 45.6%, respectively, but had little effect on the profile of VFA. Psyllium in milk replacer increased populations of bifidobacteria (from 9.7 to 10.3 log(10) cfu/g of DM) and lactobacilli (from 8.2 to 9.4 log(10) cfu/g of DM) in the reticulo-rumen, but did not affect populations in jejunum or colon. Calves fed psyllium had 12.0% greater total GIT mass and 9.4% greater GIT as a percentage of body weight. Psyllium tended to increase mass of the reticulo-rumen and significantly increased mass of duodenum (34.2%), jejunum (14.5%), and colon (14.6%). Density of intestinal tissues from calves fed psyllium-supplemented milk replacer was 25.9% greater

  6. Effect of digestion temperature and pH on treatment efficiency and evolution of volatile fatty acids during thermophilic aerobic digestion of model high strength agricultural waste.

    PubMed

    Ugwuanyi, J Obeta; Harvey, L M; McNeil, B

    2005-04-01

    Thermophilic aerobic digestion (TAD) of a model agricultural waste, potato peel slurry, at soluble chemical oxygen demand (COD) load equivalent to approximately 8.0 gl(-1), was carried out under batch conditions at 0.5 vvm aeration rate. Digestions were carried out at temperatures of 45, 50, 55, 60 and 65 degrees C (or left unregulated) without pH control to study the effect of digestion temperatures on TAD. The effects of digestion pH on the process were studied at pH 6.0, 7.0, 8.0, 9.0 and 9.5 (and in unregulated control) all at 55 degrees C. Except for digestion at 65 degrees C, which was inoculated extraneously using culture of Bacillus strearothermophilus all reactions were carried out using the populations indigenous to the waste. During digestion at different temperatures, the removal of soluble COD increased with temperature to reach a peak at 60 degrees C before declining slightly, removal of soluble solid (SS) followed similar pattern and reached peak at 65 degrees C being the highest temperature studied, while the degradation of TSS and TS (TSS + TS) decreased with an increase in temperature. Digestion at pH 7.0 was more efficient than at other pH values. Acetate was the predominant volatile fatty acid (VFA) in all the reactions and accounted for up to 90% of the total. Digestion at 60 degrees C led to the greatest accumulation of acetate, and this coincided with the period of highest oxygen uptake, and rapid consumption of soluble carbohydrate. Iso-valerate was also produced at all pH values. Digestion at 55 degrees C and also at pH 7.0 led to rapid and efficient processes with least accumulation of VFA and should be of interest in full-scale processes whenever it is practicable to regulate the digestion pH and temperature. The result of digestion at unregulated pH indicates that gradual adaptation may be used to achieve efficient treatment at elevated pH values. This would be of interest in full-scale processes where it is not practicable to tightly

  7. Sulfate reduction in freshwater sediments receiving Acid mine drainage.

    PubMed

    Herlihy, A T; Mills, A L

    1985-01-01

    One arm of Lake Anna, Va., receives acid mine drainage (AMD) from Contrary Creek (SO(4) concentration = 2 to 20 mM, pH = 2.5 to 3.5). Acid-volatile sulfide concentrations, SO(4) reduction rates, and interstitial SO(4) concentrations were measured at various depths in the sediment at four stations in four seasons to assess the effects of the AMD-added SO(4) on bacterial SO(4) reduction. Acid-volatile sulfide concentrations were always an order of magnitude higher at the stations receiving AMD than at a control station in another arm of the lake that received no AMD. Summer SO(4) reduction rates were also an order of magnitude higher at stations that received AMD than at the control station (226 versus 13.5 mmol m day), but winter values were inconclusive, probably due to low sediment temperature (6 degrees C). Profiles of interstitial SO(4) concentrations at the AMD stations showed a rapid decrease with depth (from 1,270 to 6 muM in the top 6 cm) due to rapid SO(4) reduction. Bottom-water SO(4) concentrations in the AMD-receiving arm were highest in winter and lowest in summer. These data support the conclusion that there is a significant enhancement of SO(4) reduction in sediments receiving high SO(4) inputs from AMD. PMID:16346696

  8. Sulfate Reduction in Freshwater Sediments Receiving Acid Mine Drainage

    PubMed Central

    Herlihy, Alan T.; Mills, Aaron L.

    1985-01-01

    One arm of Lake Anna, Va., receives acid mine drainage (AMD) from Contrary Creek (SO42− concentration = 2 to 20 mM, pH = 2.5 to 3.5). Acid-volatile sulfide concentrations, SO42− reduction rates, and interstitial SO42− concentrations were measured at various depths in the sediment at four stations in four seasons to assess the effects of the AMD-added SO42− on bacterial SO42− reduction. Acid-volatile sulfide concentrations were always an order of magnitude higher at the stations receiving AMD than at a control station in another arm of the lake that received no AMD. Summer SO42− reduction rates were also an order of magnitude higher at stations that received AMD than at the control station (226 versus 13.5 mmol m−2 day−1), but winter values were inconclusive, probably due to low sediment temperature (6°C). Profiles of interstitial SO42− concentrations at the AMD stations showed a rapid decrease with depth (from 1,270 to 6 μM in the top 6 cm) due to rapid SO42− reduction. Bottom-water SO42− concentrations in the AMD-receiving arm were highest in winter and lowest in summer. These data support the conclusion that there is a significant enhancement of SO42− reduction in sediments receiving high SO42− inputs from AMD. PMID:16346696

  9. PRESERVATION OF SULFIDIC WATERS CONTAINING DISSOLVED AS (III)

    EPA Science Inventory

    Field samples for arsenic analyses are commonly preserved by acidification with hydrochloric or nitric acid. In some suboxic samples, appreciable concentrations of H2S and HS- are observed due to the microbial respiration of sulfate-reducing bacteria. If both As(III) and sulfid...

  10. DETERMINATION OF HYDROGEN SULFIDE IN REFINERY FUEL GASES

    EPA Science Inventory

    Several widely employed test methods for the iodimetric measurement of hydrogen sulfide in refinery fuel gases are shown to suffer from serious thiol interferences. An absorbing solution consisting of 0.16 M cadmium sulfate/sulfuric acid at pH 3.0 is shown to be effective for the...

  11. Electrobioleaching of base metal sulfides

    NASA Astrophysics Data System (ADS)

    Natarajan, K. A.

    1992-01-01

    Bioleaching of base metal sulfides, such as pyrite, chalcopyrite, and sphalerite, under the influence of applied direct current (DC) potentials is discussed. Contributions toward mineral dissolution from three effects, namely, galvanic, applied potential, and microbiological, are analyzed and compared. Sphalerite could be selectively bioleached in the presence of Thiobacillus ferrooxidans under an applied potential of -500 mV (SCE) from mixed sulfides containing sphalerite, pyrite, and chalcopyrite. Bacterial activity and growth were found to be promoted under electrobioleaching conditions. Probable mechanisms involved in the bioleaching of different sulfides under positive and negative applied potentials are discussed.

  12. Interactions between volatile and nonvolatile coffee components. 1. Screening of nonvolatile components.

    PubMed

    Charles-Bernard, Marielle; Kraehenbuehl, Karin; Rytz, Andreas; Roberts, Deborah D

    2005-06-01

    This study is the first of two publications that investigate the phenomena of coffee nonvolatiles interacting with coffee volatile compounds. The purpose was to identify which coffee nonvolatile(s) are responsible for the interactions observed between nonvolatile coffee brew constituents and thiols, sulfides, pyrroles, and diketones. The overall interaction of these compounds with coffee brews prepared with green coffee beans roasted at three different roasting levels (light, medium, and dark), purified nonvolatiles, and medium roasted coffee brew fractions (1% solids after 1 or 24 h) was measured using a headspace solid-phase microextraction technique. The dark roasted coffee brew was slightly more reactive toward the selected compounds than the light roasted coffee brew. Selected pure coffee constituents, such as caffeine, trigonelline, arabinogalactans, chlorogenic acid, and caffeic acid, showed few interactions with the coffee volatiles. Upon fractionation of medium roasted coffee brew by solid-phase extraction, dialysis, size exclusion chromatography, or anion exchange chromatography, characterization of each fraction, evaluation of the interactions with the aromas, and correlation between the chemical composition of the fractions and the magnitude of the interactions, the following general conclusions were drawn. (1) Low molecular weight and positively charged melanoidins present significant interactions. (2) Strong correlations were shown between the melanoidin and protein/peptide content, on one hand, and the extent of interactions, on the other hand (R = 0.83-0.98, depending on the volatile compound). (3) Chlorogenic acids and carbohydrates play a secondary role, because only weak correlations with the interactions were found in complex matrixes. PMID:15913304

  13. Increasing sulfate concentrations result in higher sulfide production and phosphorous mobilization in a shallow eutrophic freshwater lake.

    PubMed

    Chen, Mo; Li, Xiao-Hong; He, Yu-Hong; Song, Na; Cai, Hai-Yuan; Wang, Changhui; Li, Yun-Tao; Chu, Hai-Yan; Krumholz, Lee R; Jiang, He-Long

    2016-06-01

    Increasing sulfate input has been seen as an issue in management of aquatic ecosystems, but its influences on eutrophic freshwater lakes is not clear. In this study, it was observed that increasing sulfate concentration without additional cyanobacterial bloom biomass (CBB) addition did not have an obvious effect on element cycling during 1-year continuous flow mesocosm experiments in which water and sediments were taken from a shallow eutrophic lake with sulfate levels near 1 mM. However, following addition of CBB to mesocosms, sulfate-reducing bacteria (SRB) were observed in the water column, and increasing numbers of SRB in the water column were associated with higher sulfate input. Sulfate amendment (0-70 mg L(-1)) also resulted in a larger amount of total dissolved sulfide (peak values of 5.90 ± 0.36 to 7.60 ± 0.12 mg L(-1)) in the water column and acid volatile sulfide (1081.71 ± 69.91 to 1557.98 ± 41.72 mg kg(-1)) in 0-1 cm surface sediments due to sulfate reduction. During the period of CBB decomposition, increasing sulfate levels in the water column were positively correlated with increasing diffusive phosphate fluxes of 1.23 ± 0.32 to 2.17 ± 0.01 mg m(-2) d(-1) at the water-sediment interface. As increases in sulfide and phosphate release rates deteriorated the water quality/ecosystem and even spurred the occurrence of a black water problem in lakes, the control of sulfate input level should be considered for shallow eutrophic lake management, especially during cyanobacterial bloom periods. PMID:27023925

  14. Changes in ruminal volatile fatty acid production and absorption rate during the dry period and early lactation as affected by rate of increase of concentrate allowance.

    PubMed

    Dieho, K; Dijkstra, J; Schonewille, J T; Bannink, A

    2016-07-01

    The aim of the present experiment was to study changes in volatile fatty acid (VFA) production using an isotope dilution technique, and changes in VFA fractional absorption rate (kaVFA) using a buffer incubation technique (BIT) during the dry period and early lactation, as affected by the postpartum (pp) rate of increase of concentrate allowance. The current results are complementary to previously reported changes on rumen papillae morphology from the same experiment. From 50 d antepartum to 80 d pp, VFA production rate was measured 5 times and kaVFA was measured 10 times in 12 rumen-cannulated Holstein Friesian cows. Cows had free access to a mixed ration, consisting of grass and corn silage, soybean meal, and (dry period only) chopped straw. Treatment consisted of either a rapid (RAP; 1.0 kg of DM/d; n=6) or gradual (GRAD; 0.25 kg of DM/d; n=6) increase of concentrate allowance (up to 10.9 kg of DM/d), starting at 4 d pp, aimed at creating a contrast in rumen-fermentable organic matter intake. For the BIT, rumen contents were evacuated, the rumen washed, and a standardized buffer fluid introduced [120 mM VFA, 60% acetic (Ac), 25% propionic (Pr), and 15% butyric (Bu) acid; pH 5.9 and Co-EDTA as fluid passage marker]. For the isotope dilution technique, a pulse-dose of (13)C-labeled Ac, Pr, and Bu and Co-EDTA as fluid passage marker was infused. The rate of total VFA production was similar between treatments and was 2 times higher during the lactation (114 mol/d) than the dry period (53 mol/d). Although papillae surface area at 16, 30, and 44 d pp was greater in RAP than GRAD, Bu and Ac production at these days did not differ between RAP and GRAD, whereas at 16 d pp RAP produced more Pr than GRAD. These results provide little support for the particular proliferative effects of Bu on papillae surface area. Similar to developments in papillae surface area in the dry period and early lactation, the kaVFA (per hour), measured using the BIT, decreased from 0.45 (Ac), 0

  15. METAL INTERACTIONS AT SULFIDE MINERAL SURFACES. PART 2. ADSORPTION AND DESORPTION OF LANTHANUM

    EPA Science Inventory

    Batch-type adsorption experiments with four sulfide minerals (chalcocite, galena, pyrite, and sphalerite) were used to investigate the adsorption and desorption behavior of lanthanum (III) in the presence of ethylenediaminetetraacetic acid (EDTA), a model humic substance. Linear ...

  16. A novel method for improving cerussite sulfidization

    NASA Astrophysics Data System (ADS)

    Feng, Qi-cheng; Wen, Shu-ming; Zhao, Wen-juan; Cao, Qin-bo; Lü, Chao

    2016-06-01

    Evaluation of flotation behavior, solution measurements, and surface analyses were performed to investigate the effects of chloride ion addition on the sulfidization of cerussite in this study. Micro-flotation tests indicate that the addition of chloride ions prior to sulfidization can significantly increase the flotation recovery of cerussite, which is attributed to the formation of more lead sulfide species on the mineral surface. Solution measurement results suggest that the addition of chloride ions prior to sulfidization induces the transformation of more sulfide ions from pulp solution onto the mineral surface by the formation of more lead sulfide species. X-ray diffraction and energy-dispersive spectroscopy indicate that more lead sulfide species form on the mineral surface when chloride ions are added prior to sulfidization. These results demonstrate that the addition of chloride ions prior to sulfidization can significantly improve the sulfidization of cerussite, thereby enhancing the flotation performance.

  17. Volatile organic compound emissions from Larrea tridentata (creosotebush)

    NASA Astrophysics Data System (ADS)

    Jardine, K.; Abrell, L.; Kurc, S. A.; Huxman, T.; Ortega, J.; Guenther, A.

    2010-12-01

    We present results from the CREosote ATmosphere Interactions through Volatile Emissions (CREATIVE 2009) field study in southern Arizona aimed at quantifying emission rates of VOCs from creosotebush (Larrea tridentata) during the summer 2009 monsoon season. This species was chosen because of its vast distribution in North and South American deserts and because its resins have been reported to contain a rich set of volatile organic compounds (VOC). While a variety of ecosystems have been investigated for VOC emissions, deserts remain essentially unstudied, partially because of their low biomass densities and water limitations. However, during the North American monsoon, a pronounced increase in rainfall from an extremely dry June (<5 mm precipitation) to a rainy July (>80 mm) occurs over large areas of the Sonoran desert in the southwestern United States and northwestern Mexico. We observed a strong diurnal pattern of branch emissions and ambient concentrations of an extensive suite of VOCs with maxima in early afternoon. These include VOCs typically observed in forest sites (oxygenated VOCs and volatile isoprenoids) as well as a large number of other compounds, some of which have not been previously described from any plant including 1-chloro-2-methoxy-benzene and isobutyronitrile. Although generally considered to be derived from anthropogenic sources, we observed emissions of aromatic compounds including benzene, and a broad range of phenolics. Dimethyl sulfide emissions from creosotebush were higher than reported from any previously studied plant suggesting that terrestrial ecosystems should be reconsidered as an important source of this climatically important gas. We also present direct, primary emission measurements of isoprene and its apparent oxidation products methyl vinyl ketone, methacrolein, and 3-methyl furan (the later three compounds are typically assumed to form from secondary reactions within the atmosphere), as well as a group of compounds considered

  18. Volatile organic compound emissions from Larrea tridentata (creosotebush)

    NASA Astrophysics Data System (ADS)

    Jardine, K.; Abrell, L.; Kurc, S. A.; Huxman, T.; Ortega, J.; Guenther, A.

    2010-07-01

    The emission of Volatile Organic Compounds (VOCs) from plants impacts both climate and air quality by fueling atmospheric chemistry and by contributing to aerosol particles. While a variety of ecosystems have been investigated for VOC emissions, deserts remain essentially unstudied, partially because of their low biomass densities and water limitations. However, during the North American monsoon, a pronounced increase in rainfall from an extremely dry June (<5 mm precipitation) to a rainy July (>80 mm) occurs over large areas of the Sonoran desert in the Southwestern United States and Northwestern Mexico. We present results from the CREosote ATmosphere Interactions through Volatile Emissions (CREATIVE 2009) field study in Southern Arizona aimed at quantifying emission rates of VOCs from creosotebush (Larrea tridentata) during the summer 2009 monsoon season. This species was chosen because of its vast distribution in North and South American deserts and because its resins have been reported to contain a rich set of VOCs. We observed a strong diurnal pattern with branch emissions and ambient concentrations of an extensive suite of VOCs with maxima in early afternoon. These include VOCs typically observed in forest sites (oxygenated VOCs and volatile isoprenoids) as well as a large number of other compounds, some of which have not been previously described from any plant including 1-chloro-2-methoxy-benzene and isobutyronitrile. Although generally considered to be derived from anthropogenic sources, we observed emissions of aromatic compounds including benzene, and a broad range of phenolics. Dimethyl sulfide emissions from creosotebush were higher than reported from any previously studied plant suggesting that terrestrial ecosystems should be reconsidered as an important source of this climatically important gas. We also present direct, primary emission measurements of isoprene and its apparent oxidation products methyl vinyl ketone, methacrolein, and 3-methyl furan

  19. Prevention of sulfide oxidation in sulfide-rich waste rock

    NASA Astrophysics Data System (ADS)

    Nyström, Elsa; Alakangas, Lena

    2015-04-01

    The ability to reduce sulfide oxidation in waste rock after mine closure is a widely researched area, but to reduce and/or inhibit the oxidation during operation is less common. Sulfide-rich (ca 30 % sulfur) waste rock, partially oxidized, was leached during unsaturated laboratory condition. Trace elements such as As and Sb were relatively high in the waste rock while other sulfide-associated elements such as Cu, Pb and Zn were low compared to common sulfide-rich waste rock. Leaching of unsaturated waste rock lowered the pH, from around six down to two, resulting in continuously increasing element concentrations during the leaching period of 272 days. The concentrations of As (65 mg/L), Cu (6.9 mg/L), Sb (1.2 mg/L), Zn (149 mg/L) and S (43 g/L) were strongly elevated at the end of the leaching period. Different alkaline industrial residues such as slag, lime kiln dust and cement kiln dust were added as solid or as liquid to the waste rock in an attempt to inhibit sulfide oxidation through neo-formed phases on sulfide surfaces in order to decrease the mobility of metals and metalloids over longer time scale. This will result in a lower cost and efforts of measures after mine closure. Results from the experiments will be presented.

  20. Anaerobic versus aerobic degradation of dimethyl sulfide and methanethiol in anoxic freshwater sediments

    SciTech Connect

    Lomans, B.P.; Op den Camp, H.J.M.; Pol, A.; Vogels, G.D.

    1999-02-01

    Degradation of dimethyl sulfide and methanethiol in slurries prepared from sediments of minerotrophic peatland ditches were studied under various conditions. Maximal aerobic dimethyl sulfide-degrading capacities, measured in bottles shaken under an air atmosphere, were 10-fold higher than the maximal anaerobic degrading capacities determined from bottles shaken under N{sub 2} or H{sub 2} atmosphere. Incubations under experimental conditions which mimic the in situ conditions, however, revealed that aerobic degradation of dimethyl sulfide and methanethiol in freshwater sediments is low due to oxygen limitation. Inhibition studies with bromoethanesulfonic acid and sodium tungstate demonstrated that the degradation of dimethyl sulfide and methanethiol in these incubations originated mainly from methanogenic activity. Prolonged incubation under a H{sub 2} atmosphere resulted in lower dimethyl sulfide degradation rates. Kinetic analysis of the data resulted in apparent K{sub m} values (6 to 8 {micro}M) for aerobic dimethyl sulfide degradation which are comparable to those reported for Thiobacillus spp., Hyphomicrobium spp., and other methylotrophs. Apparent K{sub m} values determined for anaerobic degradation of dimethyl sulfide were of the same order of magnitude. The low apparent K{sub m} values obtained explain the low dimethyl sulfide and methanethiol concentrations in freshwater sediments that they reported previously. The observations point to methanogenesis as the major mechanism of dimethyl sulfide and methanethiol consumption in freshwater sediments.

  1. Assessment of volatile compounds, neutral and polar lipid fatty acids of four beef muscles from USDA Choice and Select graded carcasses and their relationships with consumer palatability scores and intramuscular fat content.

    PubMed

    Hunt, M R; Legako, J F; Dinh, T T N; Garmyn, A J; O'Quinn, T G; Corbin, C H; Rathmann, R J; Brooks, J C; Miller, M F

    2016-06-01

    Fatty acids (FA) in neutral and polar lipids (NL and PL) and volatile compounds were determined in Gluteus medius (GM), Longissimus lumborum (LL), Serratus ventralis (SV), and Semimembranosus (SM) muscles from upper 2/3 USDA Choice and Select quality grades (QG). Concentrations of NL FA (mg/g) were influenced by intramuscular fat (IMF) content being greater in upper 2/3 Choice compared with Select. The SV contained greater concentrations of NL FA; meanwhile, the SM contained the lowest quantities of NL FA. Percentages (g/100g of total FA) of NL SFA and MUFA were increased in beef with greater IMF content. Concentrations and percentages of PL FA had muscle specific differences between QG. Volatile compounds were primarily affected by muscle. Increases in SFA and MUFA were related with consumer liking, regardless of lipid fraction. Overall the influence of QG on SFA and MUFA was muscle specific. Therefore, each muscle may require specific considerations when considering FA, volatile compounds, and ultimately consumer liking. PMID:26874592

  2. Apparatus for use in sulfide chemiluminescence detection

    DOEpatents

    Spurlin, S.R.; Yeung, E.S.

    1987-01-06

    A method is described for chemiluminescently determining a sulfide which is either hydrogen sulfide or methyl mercaptan by reacting the sulfide with chlorine dioxide at low pressure and under conditions which allow a longer reaction time in emission of a single photon for every two sulfide containing species, and thereafter, chemiluminescently detecting and determining the sulfide. The invention also relates not only to the detection method, but the novel chemical reaction and a specifically designed chemiluminescence detection cell for the reaction. 4 figs.

  3. Apparatus for use in sulfide chemiluminescence detection

    DOEpatents

    Spurlin, Stanford R.; Yeung, Edward S.

    1987-01-01

    A method of chemiluminescently determining a sulfide which is either hydrogen sulfide or methyl mercaptan by reacting the sulfide with chlorine dioxide at low pressure and under conditions which allow a longer reaction time in emission of a single photon for every two sulfide containing species, and thereafter, chemiluminescently detecting and determining the sulfide. The invention also relates not only to the detection method, but the novel chemical reaction and a specifically designed chemiluminescence detection cell for the reaction.

  4. Thermoelectric Properties of Lanthanum Sulfide

    NASA Technical Reports Server (NTRS)

    Wood, C.; Lockwood, R.; Parker, J. B.; Zoltan, A.; Zoltan, L. D.; Danielson, L.; Raag, V.

    1987-01-01

    Report describes measurement of Seebeck coefficient, electrical resistivity, thermal conductivity, and Hall effect in gamma-phase lanthanum sulfide with composition of La3-x S4. Results of study, part of search for high-temperature thermoelectric energy-conversion materials, indicate this sulfide behaves like extrinsic semiconductor over temperature range of 300 to 1,400 K, with degenerate carrier concentration controlled by stoichiometric ratio of La to S.

  5. Pyrolysis and volatilization of cocaine

    SciTech Connect

    Martin, B.R.; Lue, L.P.; Boni, J.P. )

    1989-05-01

    The increasing popularity of inhaling cocaine vapor prompted the present study, to determine cocaine's fate during this process. The free base of (3H)cocaine (1 microCi/50 mg) was added to a glass pipe, which was then heated in a furnace to simulate freebasing. Negative pressure was used to draw the vapor through a series of glass wool, ethanol, acidic, and basic traps. Air flow rate and temperature were found to have profound effects on the volatilization and pyrolysis of cocaine. At a temperature of 260 degrees C and a flow rate of 400 mL/min, 37% of the radioactivity remained in the pipe, 39% was found in the glass wool trap, and less than 1% in the remainder of the volatilization apparatus after a 10-min volatilization. Reducing the air flow rate to 100 mL/min reduced the amount of radioactivity collected in the glass wool trap to less than 10% of the starting material and increased the amount that remained in the pipe to 58%. GC/MS analysis of the contents of the glass wool trap after volatilization at 260 degrees C and a flow rate of 400 mL/min revealed that 60% of the cocaine remained intact, while approximately 6 and 2% of the starting material was recovered as benzoic acid and methylecgonidine, respectively. As the temperature was increased to 650 degrees C, benzoic acid and methylecgonidine accounted for 83 and 89% of the starting material, respectively, whereas only 2% of the cocaine remained intact. Quantitation of cocaine in the vapor during the course of volatilization revealed high concentrations during the first two min and low concentrations for the remaining time.

  6. Iron-control additives improve acidizing

    SciTech Connect

    Walker, M.; Dill, W. ); Besler, M. )

    1989-07-24

    Iron sulfide and sulfur precipitation in sour wells can be controlled with iron-sequestering agents and sulfide modifiers. Oil production has been routinely increased in sour wells where precipitation of iron sulfide and elemental sulfur has been brought under control. Production increases have been especially noteworthy on wells that had a history of rapid production decline after acid stimulation. Twenty-fold production increases have been recorded. Key to the production increase has been to increase permeability with: Iron chelating agents that control precipitation of iron sulfide. A sulfide modifier that reduces precipitation of solids in the presence of excessive amounts of hydrogen sulfide and prevents precipitation of elemental sulfur.

  7. The effects of a ration change from a total mixed ration to pasture on rumen fermentation, volatile fatty acid absorption characteristics, and morphology of dairy cows.

    PubMed

    Schären, M; Seyfang, G M; Steingass, H; Dieho, K; Dijkstra, J; Hüther, L; Frahm, J; Beineke, A; von Soosten, D; Meyer, U; Breves, G; Dänicke, S

    2016-05-01

    To investigate the effect of the change from a concentrate and silage-based ration (total mixed ration, TMR) to a pasture-based ration, a 10-wk trial (wk 1-10) was performed, including 10 rumen- and duodenum-fistulated German Holstein dairy cows (182±24 d in milk, 23.5±3.5kg of milk/d; mean ± standard deviation). The cows were divided in either a pasture group (PG, n=5) or a confinement group (CG, n=5). The CG stayed on a TMR-based ration (35% corn silage, 35% grass silage, 30% concentrate; dry matter basis), whereas the PG was gradually transitioned from a TMR to a pasture-based ration (wk 1: TMR only; wk 2: 3 h/d on pasture wk 3 and 4: 12 h/d on pasture wk 5-10: pasture only). Ruminal pH, volatile fatty acids (VFA), NH3-N, and lipopolysaccharide (LPS) concentrations were measured in rumen fluid samples collected medially and ventrally on a weekly basis. Ruminal pH was continuously recorded during 1 to 4 consecutive days each week using ruminal pH measuring devices. In wk 1, 5, and 10, rumen contents were evacuated and weighed, papillae were collected from 3 locations in the rumen, and subsequently a VFA absorption test was performed. In the PG, mean rumen pH and molar acetate proportions decreased, and molar butyrate proportions increased continuously over the course of the trial, which can most likely be ascribed to an increased intake of rapidly fermentable carbohydrates. During the first weeks on a full grazing ration (wk 5-7), variation of rumen pH decreased, and in wk 5 a lower rumen content, papillae surface area, and potential for VFA absorption were observed. In wk 8 to 10, variation of rumen pH and total VFA concentrations increased again, and acetate/propionate ratio decreased. In wk-10 rumen content, papillae area and VFA absorption characteristics similar to initial levels were observed. Although continuous rumen pH assessments and LPS concentrations did not reveal an increased risk for subacute rumen acidosis (SARA) during the adaption period

  8. Sulfur speciation and sulfide oxidation in the water column of the Black Sea

    NASA Astrophysics Data System (ADS)

    Luther, George W., III; Church, Thomas M.; Powell, David

    storage onboard ship even though they were filtered (0.2 μm) and handled to exclude oxygen contamination. Chemical additives such as formaldehyde, glutaraldehyde, hydroxylamine and ascorbic acid prevented or retarded the sulfide loss. Thiosulfate and azide did not inhibit sulfide loss. These studies suggest an anaerobic chemical oxidation of sulfide rather than a biological oxidation on stored and filtered samples.

  9. The Variation Characteristic of Sulfides and VOSc in a Source Water Reservoir and Its Control Using a Water-Lifting Aerator.

    PubMed

    Shi, Jian-Chao; Huang, Ting-Lin; Wen, Gang; Liu, Fei; Qiu, Xiao-Peng; Wang, Bao-Shan

    2016-01-01

    Sulfides and volatile organic sulfur compounds (VOSc) in water are not only malodorous but also toxic to humans and aquatic organisms. They cause serious deterioration in the ecological environment and pollute drinking water sources. In the present study, a source water reservoir-Zhoucun Reservoir in East China-was selected as the study site. Through a combination of field monitoring and in situ release experiments of sulfides, the characteristics of seasonal variation and distribution of sulfides and VOSc in the reservoir were studied, and the cause of the sulfide pollution was explained. The results show that sulfide pollution was quite severe in August and September 2014 in the Zhoucun Reservoir, with up to 1.59 mg·L(-1) of sulfides in the lower layer water. The main source of sulfides is endogenous pollution. VOSc concentration correlates very well with that of sulfides during the summer, with a peak VOSc concentration of 44.37 μg·L(-1). An installed water-lifting aeration system was shown to directly oxygenate the lower layer water, as well as mix water from the lower and the upper layers. Finally, the principle and results of controlling sulfides and VOSc in reservoirs using water-lifting aerators are clarified. Information about sulfides and VOSc fluctuation and control gained in this study may be applicable to similar reservoirs, and useful in practical water quality improvement and pollution prevention. PMID:27092517

  10. The Variation Characteristic of Sulfides and VOSc in a Source Water Reservoir and Its Control Using a Water-Lifting Aerator

    PubMed Central

    Shi, Jian-Chao; Huang, Ting-Lin; Wen, Gang; Liu, Fei; Qiu, Xiao-Peng; Wang, Bao-Shan

    2016-01-01

    Sulfides and volatile organic sulfur compounds (VOSc) in water are not only malodorous but also toxic to humans and aquatic organisms. They cause serious deterioration in the ecological environment and pollute drinking water sources. In the present study, a source water reservoir—Zhoucun Reservoir in East China—was selected as the study site. Through a combination of field monitoring and in situ release experiments of sulfides, the characteristics of seasonal variation and distribution of sulfides and VOSc in the reservoir were studied, and the cause of the sulfide pollution was explained. The results show that sulfide pollution was quite severe in August and September 2014 in the Zhoucun Reservoir, with up to 1.59 mg·L−1 of sulfides in the lower layer water. The main source of sulfides is endogenous pollution. VOSc concentration correlates very well with that of sulfides during the summer, with a peak VOSc concentration of 44.37 μg·L−1. An installed water-lifting aeration system was shown to directly oxygenate the lower layer water, as well as mix water from the lower and the upper layers. Finally, the principle and results of controlling sulfides and VOSc in reservoirs using water-lifting aerators are clarified. Information about sulfides and VOSc fluctuation and control gained in this study may be applicable to similar reservoirs, and useful in practical water quality improvement and pollution prevention. PMID:27092517

  11. PROCESS FOR TREATING VOLATILE METAL FLUORIDES

    DOEpatents

    Rudge, A.J.; Lowe, A.J.

    1957-10-01

    This patent relates to the purification of uranium hexafluoride, made by reacting the metal or its tetrafluoride with fluorine, from the frequently contained traces of hydrofluoric acid. According to the present process, UF/sub 6/ containing as an impurity a small amount of hydrofluoric acid, is treated to remove such impurity by contact with an anhydrous alkali metal fluoride such as sodium fluoride. In this way a non-volatile complex containing hydrofluoric acid and the alkali metal fluoride is formed, and the volatile UF /sub 6/ may then be removed by distillation.

  12. Release of volatile mercury from vascular plants

    NASA Technical Reports Server (NTRS)

    Siegel, S. M.; Puerner, N. J.; Speitel, T. W.

    1974-01-01

    Volatile, organic solvent soluble mercury has been found in leaves and seeds of several angiosperms. Leaves of garlic vine, avocado, and haole-koa release mercury in volatile form rapidly at room temperature. In garlic vine, the most active release is temperature dependent, but does not parallel the vapor-pressure temperature relationship for mercury. Mercury can be trapped in nitric-perchloric acid digestion fluid, or n-hexane, but is lost from the hexane unless the acid mixture is present. Seeds of haole-koa also contain extractable mercury but volatility declines in the series n-hexane (90%), methanol (50%), water (10%). This suggests that reduced volatility may accompany solvolysis in the more polar media.

  13. Inhaled Hydrogen Sulfide

    PubMed Central

    Volpato, Gian Paolo; Searles, Robert; Yu, Binglan; Scherrer-Crosbie, Marielle; Bloch, Kenneth D.; Ichinose, Fumito; Zapol, Warren M.

    2010-01-01

    Background Breathing hydrogen sulfide (H2S) has been reported to induce a suspended animation–like state with hypothermia and a concomitant metabolic reduction in rodents. However, the impact of H2S breathing on cardiovascular function remains incompletely understood. In this study, the authors investigated the cardiovascular and metabolic effects of inhaled H2S in a murine model. Methods The impact of breathing H2S on cardiovascular function was examined using telemetry and echocardiography in awake mice. The effects of breathing H2S on carbon dioxide production and oxygen consumption were measured at room temperature and in a warmed environment. Results Breathing H2S at 80 parts per million by volume at 27°C ambient temperature for 6 h markedly reduced heart rate, core body temperature, respiratory rate, and physical activity, whereas blood pressure remained unchanged. Echocardiography demonstrated that H2S exposure decreased both heart rate and cardiac output but preserved stroke volume. Breathing H2S for 6 h at 35°C ambient temperature (to prevent hypothermia) decreased heart rate, physical activity, respiratory rate, and cardiac output without altering stroke volume or body temperature. H2S breathing seems to induce bradycardia by depressing sinus node activity. Breathing H2S for 30 min decreased whole body oxygen consumption and carbon dioxide production at either 27° or 35°C ambient temperature. Both parameters returned to baseline levels within 10 min after the cessation of H2S breathing. Conclusions Inhalation of H2S at either 27° or 35°C reversibly depresses cardiovascular function without changing blood pressure in mice. Breathing H2S also induces a rapidly reversible reduction of metabolic rate at either body temperature. PMID:18362598

  14. Enzymatic methylation of sulfide, selenide, and organic thiols by Tetrahymena thermophila

    SciTech Connect

    Drotar, A.; Fall, L.R.; Mishalanie, E.A.; Tavernier, J.E.; Fall, R.

    1987-09-01

    Cell extracts from the ciliate Tetrahymena thermophila catalyzed the S-adenosylmethionine-dependent methylation of sulfide. The product of the reaction, methanethiol, was detected by a radiometric assay and by a gas-chromatographic assay coupled to a sulfur-selective chemiluminescence detector. Extracts also catalyzed the methylation of selenide, and the product was shown by gas chromatography-mass spectrometry to be methaneselenol. The sulfide and selenide methyltransferase activities copurified with the aromatic thiol methyltransferase previously characterized from this organism, but heat inactivation experiments suggested the involvement of distinct sulfide and selenide methyltransferases. Short-term toxicity tests were carried out for sulfide, selenide, and their methylated derivatives; the monomethylated forms were somewhat more toxic than the nonmethylated or dimethylated compounds. Cell suspensions of T. thermophila exposed to sulfide, methanethiol, or their selenium analogs emitted methylated derivatives into the headspace. These results suggest that this freshwater protozoan is capable of the stepwise methylation of sulfide and selenide, leading to the release of volatile methylated sulfur or selenium gases.

  15. Enzymatic methylation of sulfide, selenide, and organic thiols by Tetrahymena thermophila.

    PubMed Central

    Drotar, A; Fall, L R; Mishalanie, E A; Tavernier, J E; Fall, R

    1987-01-01

    Cell extracts from the ciliate Tetrahymena thermophila catalyzed the S-adenosylmethionine-dependent methylation of sulfide. The product of the reaction, methanethiol, was detected by a radiometric assay and by a gas-chromatographic assay coupled to a sulfur-selective chemiluminescence detector. Extracts also catalyzed the methylation of selenide, and the product was shown by gas chromatography-mass spectrometry to be methaneselenol. The sulfide and selenide methyltransferase activities copurified with the aromatic thiol methyltransferase previously characterized from this organism (A.-M. Drotar and R. Fall, Pestic. Biochem. Physiol. 25:396-406, 1986), but heat inactivation experiments suggested the involvement of distinct sulfide and selenide methyltransferases. Short-term toxicity tests were carried out for sulfide, selenide, and their methylated derivatives; the monomethylated forms were somewhat more toxic than the nonmethylated or dimethylated compounds. Cell suspensions of T. thermophila exposed to sulfide, methanethiol, or their selenium analogs emitted methylated derivatives into the headspace. These results suggest that this freshwater protozoan is capable of the stepwise methylation of sulfide and selenide, leading to the release of volatile methylated sulfur or selenium gases. PMID:3674871

  16. Surface reactivity of pyrite and related sulfides

    NASA Astrophysics Data System (ADS)

    Murphy, Riley; Strongin, Daniel R.

    2009-01-01

    Pyrite, FeS 2, commonly referred to as "Fool's gold" is the most common sulfide in the Earth's surface region. Not only is the mineral ubiquitous, but the reactivity of pyrite is of central importance in a devastating environmental issue known as acid mine drainage (AMD) and in beneficial commercial processes such as mineral benefaction, which can range from the desulfurization of coal to the isolation of copper or gold ores. Pyrite has even been postulated to be a key constituent of a prebiotic iron-sulfur world existing at the high pressure and temperature conditions common to hydrothermal vents at the oceanic floor. The development of an atomic level picture of the structure and reactivity of pyrite is paramount to understanding the chemistry of this mineral in these wide-ranging environments. This contribution focuses on research carried out over the past three decades that has used modern surface science tools to understand the reactivity of pyrite surfaces. An understanding of the reactivity of the pyrite surfaces has benefited from studies using a wide range of experimental techniques that range from vacuum-based experiments utilizing electron and photon spectroscopies, and probe microscopy to in situ studies using infra-red spectroscopy. Synchrotron-based techniques that include photoelectron spectroscopy and X-ray absorption spectroscopy have played a large role in both these environments. These techniques have perhaps been the most useful in establishing the structure of the pristine pyrite surface. Related iron sulfides are also briefly introduced in this review including pyrrhotite (Fe xS 1- x) and the dimorph of pyrite, marcasite. The surface reactivity of these sulfides exhibit both similarities and differences to pyrite, and help to bring forward the unique activity of pyrite in both environmentally and technologically important conditions.

  17. Conference on Planetary Volatiles

    NASA Technical Reports Server (NTRS)

    Hrametz, K.; Kofler, L.

    1982-01-01

    Initial and present volatile inventories and distributions in the Earth, other planets, meteorites, and comets; observational evidence on the time history of volatile transfer among reservoirs; and volatiles in planetary bodies, their mechanisms of transport, and their relation to thermal, chemical, geological and biological evolution were addressed.

  18. Conference on Planetary Volatiles

    NASA Technical Reports Server (NTRS)

    Pepin, R. O. (Compiler); Oconnell, R. (Compiler)

    1982-01-01

    Initial and present volatile inventories and distributions in the Earth, other planets, meteorites, and comets; observational evidence on the time history of volatile transfer among reservoirs; and volatiles in planetary bodies, their mechanisms of transport, and their relation to thermal, chemical, geological and biological evolution are addressed.

  19. Sulfite-sulfide-sulfate-carbonate equilibria with applications to Mars

    NASA Astrophysics Data System (ADS)

    Marion, G. M.; Kargel, J. S.; Crowley, J. K.; Catling, D. C.

    2013-07-01

    Mars volcanic SO2 and H2S gas emissions are likely the dominant source of martian sulfate, and the source of sulfuric acid. Until this work, the FREZCHEM model lacked SO2 and H2S gases and associated sulfite and sulfide minerals. The specific objectives of this paper were to add these components and associated sulfite and sulfide minerals and phases into FREZCHEM, and to explore some possible roles of these chemistries on Mars. New solid phases added included the sulfites: Na2SO3·7H2O, K2SO3, (NH4)2SO3·H2O, MgSO3·6H2O, CaSO3·0.5H2O, and FeSO3·1.5H2O, and the sulfide: FeS2. The lowest eutectic of these minerals was K2SO3 (= 6.57 m) at 228 K. Because sulfurous acid is stronger than carbonic acid, this causes a much larger fraction of S(IV) to exist as sulfite (SO32-) at acidic to mildly alkaline pH, whereas almost none of the C is present as carbonate anion. Model calculations show that small quantities of SO2 in an early CO2-rich martian atmosphere suppressed formation of carbonates because SO2 is much more water soluble than CO2 and a stronger acid, which may be a major reason why sulfates are much more common than carbonates on Mars. Also, perhaps equally important are low temperatures that favor sulfite mineral precipitation, the oxidation of which leads to sulfate minerals. Another potentially important factor that favors sulfite/sulfide mineral formation is low pH values that cannot allow carbonate minerals, but can allow sulfide minerals such as pyrite (FeS2). The presence of pyrite, highly insoluble, would lead to sulfate minerals when oxygen becomes available in acidic environments. Major cations for both sulfites (or sulfates) and carbonates (Ca and Mg) can limit carbonates. Sulfite-sulfide volcanism on a cold, lower pH, Mars are the primary causes of high sulfate minerals (e.g., Ca and Mg sulfates), compared to volcanism on a warm, higher pH, Earth that led to more abundant carbonate minerals (e.g., Ca and Mg carbonates).

  20. Silicate sulfidation and chemical differences between enstatite chondrites and Earth

    NASA Astrophysics Data System (ADS)

    Lehner, S. W.; Petaev, M. I.; Buseck, P. R.

    2013-12-01

    Isotopic similarity between the Earth-Moon system and enstatite chondrites (ECs) led to the idea that ECs were Earth's building blocks [1-3]. However, compared to Earth's mantle, ECs have low Fe0/Fe ratios, are enriched in volatile elements, and depleted in refractory lithophile elements and Mg [4]. Therefore, deriving Earth composition from ECs requires a loss of volatiles during or prior to accretion and sequestering a large fraction of Si in the deep Earth. Alternatively, the isotopic similarity between the Earth and ECs is explained by their formation from a common precursor that experienced different evolutionary paths resulting in the chemical difference [4]. The vestiges of such a precursor are still present in the unequilibrated ECs as FeO-rich silicates with O isotopic compositions identical to bulk ECs and Earth [5]. Conversion of such a precursor into the characteristic EC mineral assemblage requires high-temperature processing in an H-poor environment with high fS2 and fO2 close to that of the classic solar nebula [6], consistent with redox conditions inferred from Ti4+/Ti3+ ratios in EC pyroxene [7]. Under such conditions reaction of FeO-rich silicates with S-rich gas results in their replacement by the assemblage of FeO-poor silicates; Fe, Mg, Ca sulfides; free silica; and Si-bearing Fe,Ni metal alloy. The progressive sulfidation of ferromagnesian silicates in chondrules results in loss of Mg and addition of Fe, Mn, S, Na, K and, perhaps, other volatiles [6]. At the advanced stages of silicate sulfidation recorded in the metal-sulfide nodules [8], a portion of Si is reduced and dissolved in the Fe,Ni metal. This process is known to fractionate Si isotopes [9,10] and would explain the differences between the ECs and Earth's mantle [11]. The sulfidation of silicates also produces porous S-rich silica, a peculiar phase observed so far only in the ECs. It consists of a sinewy SiO2-rich framework enclosing numerous vesicles filled with beam

  1. Sulfide Stability of Planetary Basalts

    NASA Technical Reports Server (NTRS)

    Caiazza, C. M.; Righter, K.; Gibson, E. K., Jr.; Chesley, J. T.; Ruiz, J.

    2004-01-01

    The isotopic system, 187Re 187Os, can be used to determine the role of crust and mantle in magma genesis. In order to apply the system to natural samples, we must understand variations in Re/Os concentrations. It is thought that low [Os] and [Re] in basalts can be attributed to sulfide (FeS) saturation, as Re behaves incompatibly to high degrees of evolution until sulfide saturation occurs [1]. Previous work has shown that lunar basalts are sulfide under-saturated, and mid-ocean ridge, ocean-island and Martian (shergottites) basalts are saturated [2,3]. However, little is known about arc basalts. In this study, basaltic rocks were analyzed across the Trans-Mexican Volcanic Belt.

  2. A Reaction Involving Oxygen and Metal Sulfides.

    ERIC Educational Resources Information Center

    Hill, William D. Jr.

    1986-01-01

    Describes a procedure for oxygen generation by thermal decomposition of potassium chlorate in presence of manganese dioxide, reacted with various sulfides. Provides a table of sample product yields for various sulfides. (JM)

  3. Microbial conversion of inorganic carbon to dimethyl sulfide in anoxic lake sediment (Plußsee, Germany)

    NASA Astrophysics Data System (ADS)

    Lin, Y. S.; Heuer, V. B.; Ferdelman, T. G.; Hinrichs, K.-U.

    2010-08-01

    In anoxic environments, volatile methylated sulfides like methanethiol (MT) and dimethyl sulfide (DMS) link the pools of inorganic and organic carbon with the sulfur cycle. However, direct formation of methylated sulfides from reduction of dissolved inorganic carbon has previously not been demonstrated. When studying the effect of temperature on hydrogenotrophic microbial activity, we observed formation of DMS in anoxic sediment of Lake Plußsee at 55 °C. Subsequent experiments strongly suggested that the formation of DMS involves fixation of bicarbonate via a reductive pathway in analogy to methanogenesis and engages methylation of MT. DMS formation was enhanced by addition of bicarbonate and further increased when both bicarbonate and H2 were supplemented. Inhibition of DMS formation by 2-bromoethanesulfonate points to the involvement of methanogens. Compared to the accumulation of DMS, MT showed the opposite trend but there was no apparent 1:1 stoichiometric ratio between both compounds. Both DMS and MT had negative δ13C values of -62‰ and -55‰, respectively. Labeling with NaH13CO3 showed more rapid incorporation of bicarbonate into DMS than into MT. The stable carbon isotopic evidence implies that bicarbonate was fixed via a reductive pathway of methanogenesis, and the generated methyl coenzyme M became the methyl donor for MT methylation. Neither DMS nor MT accumulation were stimulated by addition of the methyl-group donors methanol and syringic acid or by the methyl-group acceptor hydrogen sulphide. The source of MT was further investigated in a H235S labeling experiment, which demonstrated a microbially-mediated process of hydrogen sulfide methylation to MT that accounted for only <10% of the accumulation rates of DMS. Therefore, the major source of the 13C-depleted MT was neither bicarbonate nor methoxylated aromatic compounds. Other possibilities for isotopically depleted MT, such as other organic precursors like methionine, are discussed. This DMS

  4. Vegetation successfully prevents oxidization of sulfide minerals in mine tailings.

    PubMed

    Li, Yang; Sun, Qingye; Zhan, Jing; Yang, Yang; Wang, Dan

    2016-07-15

    The oxidization of metal sulfide in tailings causes acid mine drainage. However, it remains unclear whether vegetation prevents the oxidization of metal sulfides. The oxidization characteristics and microbial indices of the tailings in the presence of various plant species were investigated to explore the effects of vegetation on the oxidization of sulfide minerals in tailings. The pH, reducing sulfur, free iron oxides (Fed), chemical oxygen consumption (COC) and biological oxygen consumption (BOC) were measured. Key iron- and sulfur-oxidizing bacteria (Acidithiobacillus spp., Leptospirillum spp. and Thiobacillus spp.) were quantified using real-time PCR. The results indicate that vegetation growing on tailings can effectively prevent the oxidization of sulfide minerals in tailings. A higher pH and reducing-sulfur content and lower Fed were observed in the 0-30 cm depth interval in the presence of vegetation compared to bare tailings (BT). The COC gradually decreased with depth in all of the soil profiles; specifically, the COC rapidly decreased in the 10-20 cm interval in the presence of vegetation but gradually decreased in the BT profiles. Imperata cylindrica (IC) and Chrysopogon zizanoides (CZ) profiles contained the highest BOC in the 10-20 cm interval. The abundance of key iron- and sulfur-oxidizing bacteria in the vegetated tailings were significantly lower than in the BT; in particular, IC was associated with the lowest iron- and sulfur-oxidizing bacterial abundance. In conclusion, vegetation successfully prevented the oxidization of sulfide minerals in the tailings, and Imperata cylindrica is the most effective in reducing the number of iron- and sulfur-oxidizing bacteria and helped to prevent the oxidization of sulfide minerals in the long term. PMID:27093236

  5. Enamel surface changes caused by hydrogen sulfide

    PubMed Central

    Yamaguchi, Takao; Hanabusa, Masao; Hosoya, Noriyasu; Chiba, Toshie; Yoshida, Takumasa; Morito, Akiyuki

    2015-01-01

    Background: Volatile sulfur compounds (VSCs) produced inside the mouth are a well-known cause of halitosis. Recent studies have suggested that VSCs modify the pathology of periodontitis by encouraging the migration of bacterial toxins associated with increased permeability of gingival epithelia, and enhancing the production of matrix metalloproteinases in gingival connective tissue. Nonetheless, the effects on the enamel of direct exposure to VSCs within the oral cavity remain unclear. In the present study, we observed the effects of VSCs in the form of hydrogen sulfide (H2S) on enamel surfaces and determined their effects on restorations. Materials and Methods: Extracted human tooth and bovine tooth samples were divided into the H2S experimental side and the control side. We observed the effects of H2S on enamel surfaces using electron microscopy and conducted a shear test. Results: We found that exposure to H2S obscured the enamel surface's crystal structure. The surface also exhibited coarseness and reticular changes. Shear testing did not reveal any differences in bond strength. Conclusions: Our findings suggested that H2S occurring inside the mouth causes changes to the crystal structure of the enamel surface that can lead to tooth wear, but that it does not diminish the effects of dental bonding in adhesive restorations. PMID:26752833

  6. Use of iron salts to control dissolved sulfide in trunk sewers

    SciTech Connect

    Padival, N.A.; Kimbell, W.A.; Redner, J.A.

    1995-11-01

    Sewer headspace H{sub 2}S reduction by precipitating dissolved sulfide in wastewater was investigated using iron salt (FeCl{sub 3} and FeCl{sub 2}). Full-scale experiments were conducted in a 40-km (25 mi) sewer with an average flow of 8.7 m{sup 3}/s (200 mgd). Results were sensitive to total Fe dosages and Fe(III)/Fe(II) blend ratios injected. A concentration of 16 mg/L total Fe and a blend ratio of 1.9:1 [Fe(III):Fe(II)] reduced dissolved sulfide levels by 97%. Total sulfide and headspace H{sub 2}S were reduced by 63% and 79%, respectively. Liquid and gas-phase sulfide reductions were largely due to the effective precipitation of sulfide with Fe(III) and Fe(II) and the limited volatilization of H{sub 2}S, respectively. Oxidation of sulfide in the presence of Fe(II) and minute amounts of O{sub 2} may have occurred. A combination of Fe(III) and Fe(II) proved more effective than either salt alone. By using excess Fe(III), dissolved sulfide can be reduced to undetectable levels. No specific relation between the concentration of Fe or Fe(III)/Fe(II) blend ratio and sewer crown pH was inferred. Iron salts may retard crown corrosion rates by precipitating free sulfide and reducing its release to the sewer headspace as H{sub 2}S. A mechanism to inhibit certain responsible bacteria was not established in the 40-km (25 mi) sewer.

  7. Sulfides in the sulfur-poor zones of the Stillwater Complex, Montana

    NASA Astrophysics Data System (ADS)

    Aird, H. M.; Boudreau, A. E.

    2013-12-01

    The processes involved in the formation of the platinum-group-element (PGE) enriched J-M reef and Picket Pin zones of the Stillwater Complex remain controversial, with theories ranging from the purely magmatic (e.g. magma mixing) to those involving interaction with a volatile fluid. Since the PGE are often associated with base metal sulfides, we are characterizing the sulfide assemblages in samples collected in the 'sulfur-poor' regions above and below the J-M reef in an attempt to elucidate the mechanisms involved in the formation of the ore-zone. Localized, heavily altered assemblages primarily include greenschist minerals such as clinozoisite, chlorite and disseminated calcite and quartz. These sulfides have not been included in this study. In Gabbronorite Zone I (GN-I), below the J-M reef, sulfide assemblages often consist of large (~200μm) multiphase sulfides comprising pentlandite, pyrrhotite, chalcopyrite and pyrite with minor primary magnetite, calcite and quartz. When hosted by orthopyroxene these assemblages are commonly rimmed by Ca-rich pyroxene. Some sulfides below the ore-zone are in intimate association with high-temperature carbonates composed of calcite exsolved from dolomite. Hydrous minerals such as biotite and apatite are also commonly found in association with sulfide assemblages below the reef. Sulfide assemblages in the Bronzitite Zone (BZ) commonly resemble those in GN-I, but may also be smaller (<50μm) multiphase blebs comprising pyrrhotite, pentlandite and magnetite, such as are found in the Peridotite Zone (PZ). Sulfides in the BZ are hosted by orthopyroxene, often rimmed by Ca-rich pyroxene, while sulfides in the PZ may be hosted by orthopyroxene or olivine, sometimes with associated chromite. Conversely, fresh assemblages above the J-M reef (GN-II) commonly consist of monophase pyrite which has been partially altered to magnetite, either from the outside inwards, or along cracks within the sulfide crystal. These sulfides are hosted by

  8. 30 CFR 250.604 - Hydrogen sulfide.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 2 2011-07-01 2011-07-01 false Hydrogen sulfide. 250.604 Section 250.604...-Workover Operations § 250.604 Hydrogen sulfide. When a well-workover operation is conducted in zones known to contain hydrogen sulfide (H2S) or in zones where the presence of H2S is unknown (as defined...

  9. 30 CFR 250.808 - Hydrogen sulfide.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 2 2013-07-01 2013-07-01 false Hydrogen sulfide. 250.808 Section 250.808 Mineral Resources BUREAU OF SAFETY AND ENVIRONMENTAL ENFORCEMENT, DEPARTMENT OF THE INTERIOR OFFSHORE OIL... § 250.808 Hydrogen sulfide. Production operations in zones known to contain hydrogen sulfide (H2S) or...

  10. 30 CFR 250.808 - Hydrogen sulfide.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 2 2012-07-01 2012-07-01 false Hydrogen sulfide. 250.808 Section 250.808 Mineral Resources BUREAU OF SAFETY AND ENVIRONMENTAL ENFORCEMENT, DEPARTMENT OF THE INTERIOR OFFSHORE OIL... § 250.808 Hydrogen sulfide. Production operations in zones known to contain hydrogen sulfide (H2S) or...

  11. 30 CFR 250.808 - Hydrogen sulfide.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 2 2014-07-01 2014-07-01 false Hydrogen sulfide. 250.808 Section 250.808 Mineral Resources BUREAU OF SAFETY AND ENVIRONMENTAL ENFORCEMENT, DEPARTMENT OF THE INTERIOR OFFSHORE OIL... § 250.808 Hydrogen sulfide. Production operations in zones known to contain hydrogen sulfide (H2S) or...

  12. 30 CFR 250.504 - Hydrogen sulfide.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 2 2011-07-01 2011-07-01 false Hydrogen sulfide. 250.504 Section 250.504...-Completion Operations § 250.504 Hydrogen sulfide. When a well-completion operation is conducted in zones known to contain hydrogen sulfide (H2S) or in zones where the presence of H2S is unknown (as defined...

  13. Nanostructured metal sulfides for energy storage.

    PubMed

    Rui, Xianhong; Tan, Huiteng; Yan, Qingyu

    2014-09-01

    Advanced electrodes with a high energy density at high power are urgently needed for high-performance energy storage devices, including lithium-ion batteries (LIBs) and supercapacitors (SCs), to fulfil the requirements of future electrochemical power sources for applications such as in hybrid electric/plug-in-hybrid (HEV/PHEV) vehicles. Metal sulfides with unique physical and chemical properties, as well as high specific capacity/capacitance, which are typically multiple times higher than that of the carbon/graphite-based materials, are currently studied as promising electrode materials. However, the implementation of these sulfide electrodes in practical applications is hindered by their inferior rate performance and cycling stability. Nanostructures offering the advantages of high surface-to-volume ratios, favourable transport properties, and high freedom for the volume change upon ion insertion/extraction and other reactions, present an opportunity to build next-generation LIBs and SCs. Thus, the development of novel concepts in material research to achieve new nanostructures paves the way for improved electrochemical performance. Herein, we summarize recent advances in nanostructured metal sulfides, such as iron sulfides, copper sulfides, cobalt sulfides, nickel sulfides, manganese sulfides, molybdenum sulfides, tin sulfides, with zero-, one-, two-, and three-dimensional morphologies for LIB and SC applications. In addition, the recently emerged concept of incorporating conductive matrices, especially graphene, with metal sulfide nanomaterials will also be highlighted. Finally, some remarks are made on the challenges and perspectives for the future development of metal sulfide-based LIB and SC devices. PMID:25073046

  14. 30 CFR 250.808 - Hydrogen sulfide.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Hydrogen sulfide. 250.808 Section 250.808... OPERATIONS IN THE OUTER CONTINENTAL SHELF Oil and Gas Production Safety Systems § 250.808 Hydrogen sulfide. Production operations in zones known to contain hydrogen sulfide (H2S) or in zones where the presence of...

  15. 30 CFR 250.604 - Hydrogen sulfide.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Hydrogen sulfide. 250.604 Section 250.604... OPERATIONS IN THE OUTER CONTINENTAL SHELF Oil and Gas Well-Workover Operations § 250.604 Hydrogen sulfide. When a well-workover operation is conducted in zones known to contain hydrogen sulfide (H2S) or...

  16. 30 CFR 250.504 - Hydrogen sulfide.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Hydrogen sulfide. 250.504 Section 250.504... OPERATIONS IN THE OUTER CONTINENTAL SHELF Oil and Gas Well-Completion Operations § 250.504 Hydrogen sulfide. When a well-completion operation is conducted in zones known to contain hydrogen sulfide (H2S) or...

  17. 30 CFR 250.490 - Hydrogen sulfide.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 2 2014-07-01 2014-07-01 false Hydrogen sulfide. 250.490 Section 250.490 Mineral Resources BUREAU OF SAFETY AND ENVIRONMENTAL ENFORCEMENT, DEPARTMENT OF THE INTERIOR OFFSHORE OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF Oil and Gas Drilling Operations Hydrogen Sulfide § 250.490 Hydrogen sulfide. (a)...

  18. Denitrifying sulfide removal process on high-salinity wastewaters in the presence of Halomonas sp.

    PubMed

    Liu, Chunshuang; Zhao, Dongfeng; Ma, Wenjuan; Guo, Yadong; Wang, Aijie; Wang, Qilin; Lee, Duu-Jong

    2016-02-01

    Biological conversion of sulfide, acetate, and nitrate to, respectively, elemental sulfur (S(0)), carbon dioxide, and nitrogen-containing gas (such as N2) at NaCl concentration of 35-70 g/L was achieved in an expanded granular sludge bed (EGSB) reactor. A C/N ratio of 1:1 was noted to achieve high sulfide removal and S(0) conversion rate at high salinity. The extracellular polymeric substance (EPS) quantities were increased with NaCl concentration, being 11.4-mg/g volatile-suspended solids at 70 mg/L NaCl. The denitrifying sulfide removal (DSR) consortium incorporated Thauera sp. and Halomonas sp. as the heterotrophs and Azoarcus sp. being the autotrophs at high salinity condition. Halomonas sp. correlates with the enhanced DSR performance at high salinity. PMID:26454867

  19. Vesicle-metal-sulfide assemblages from the Chelyabinsk meteorite

    NASA Astrophysics Data System (ADS)

    Andronikov, A.; Lauretta, D.; Hill, D.; Andronikova, I.

    2014-07-01

    On February 15, 2013, an ET object entered the Earth's atmosphere over the Russian city of Chelyabinsk. It entered at a preatmospheric velocity of 18.6 km/sec at the angle of 17--20°. The bolide responsible for this event was estimated to be 17-20 m in diameter and had a mass of ˜10 Ktons; the ensuing airburst occurred at an altitude >20 km and released a total energy of ˜440 kT [1,2]. The Chelyabinsk meteorite is an equilibrated LL5 ordinary chondrite, shock stage S4, and weathering grade WG0 similar to other LL5 falls [1,2]. Our studied sample is an impact melt breccia consisting of shock-darkened chondrite clasts (SDC) and vesicular impact melt lithology (IML). The SDC have recrystallized textures and contain barred- and porphyritic-olivine, porphyritic-olivine-pyroxene and radial-pyroxene chondrules in the intrachondrule matrix. A dense network of thin fractures in the SDC is filled up with opaque minerals [cf. 3]. Metals in the SDC are kamacite (4.7--8.5 % Ni), taenite (21.4--33.5 % Ni), and martensite (14.5--18.6 % Ni). The IML consists mostly of tiny (<10 microns) silicate grains surrounded by patches of glass. The IML is characterized by the presence of multiple vesicles (up to 1 mm) in silicate matrix. The vesicles are often filled up with sulfide-metal assemblages or only with sulfide. Metals in the IML are martensite (12.9--18.4 % Ni) and taenite (19.3--47.3 % Ni). Sulfides from both SDC and IML are Ni-bearing troilite (62.2--64.2 % Fe; 35.2--37.2 % S; 3000--5000 ppm Ni), with rare pentlandite (41.2--48.6 % Fe, 33.2--34.3 % S, 19.4--23.9 % Ni). The presence of abundant vesicles in the IML indicates strong heating and volatilization. Since no other phase except for sulfide-metal assemblages were observed to fill up vesicles, the likely source of volatiles is S vapor formed by vaporization of FeS during impact melting [cf. 4]. Molten metal and sulfide coalesced into droplets of metal-sulfide liquids forming eventually sulfide-metal assemblages. A

  20. Instrumentation for evaluating differences in ammonia volatilization from broiler litter and cake

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Greater understanding of the mechanisms affecting ammonia volatilization from reused broiler bedding is needed to determine pathways for mitigating ammonia emissions. A chamber acid trap (CAT) system was developed to provide an improved laboratory method for determining ammonia volatilization from...

  1. SULFIDE PRECIPITATION OF HEAVY METALS

    EPA Science Inventory

    The research program was initiated with the objective of evaluating a new process, the sulfide precipitation of heavy metals from industrial wastewaters. The process was expected to effect a more complete removal of heavy metals than conventional lime processing because of the mu...

  2. p-Chlorophenyl methyl sulfide

    Integrated Risk Information System (IRIS)

    p - Chlorophenyl methyl sulfide ; CASRN 123 - 09 - 1 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for N

  3. Transition metal sulfide loaded catalyst

    DOEpatents

    Maroni, Victor A.; Iton, Lennox E.; Pasterczyk, James W.; Winterer, Markus; Krause, Theodore R.

    1994-01-01

    A zeolite based catalyst for activation and conversion of methane. A zeolite support includes a transition metal (Mo, Cr or W) sulfide disposed within the micropores of the zeolite. The catalyst allows activation and conversion of methane to C.sub.2 + hydrocarbons in a reducing atmosphere, thereby avoiding formation of oxides of carbon.

  4. Platinum metals magmatic sulfide ores.

    PubMed

    Naldrett, A J; Duke, J M

    1980-06-27

    Platinum-group elements (PGE) are mined predominantly from deposits that have formed by the segregation of molten iron-nickel-copper sulfides from silicate magmas. The absolute concentrations of PGE in sulfides from different deposits vary over a range of five orders of magnitude, whereas those of other chalcophile elements vary by factors of only 2 to 100. However, the relative proportions of the different PGE in a given deposit are systematically related to the nature of the parent magma. The absolute and relative concentrations of PGE in magmatic sulfides are explained in terms of the degree of partial melting of mantle peridotite required to produce the parent magma and the processes of batch equilibration and fractional segregation of sulfides. The Republic of South Africa and the U.S.S.R. together possess more than 97 percent of the world PGE reserves, but significant undeveloped resources occur in North America. The Stillwater complex in Montana is perhaps the most important example. PMID:17796685

  5. Sulfide:quinone oxidoreductase from echiuran worm Urechis unicinctus.

    PubMed

    Ma, Yu-Bin; Zhang, Zhi-Feng; Shao, Ming-Yu; Kang, Kyoung-Ho; Tan, Zhi; Li, Jin-Long

    2011-02-01

    Sulfide is a natural, widely distributed, poisonous substance, and sulfide:quinone oxidoreductase (SQR) has been identified to be responsible for the initial oxidation of sulfide in mitochondria. In this study, full-length SQR cDNA was cloned from the echiuran worm Urechis unicinctus, a benthic organism living in marine sediments. The protein consisted of 451 amino acids with a theoretical pI of 8.98 and molecular weight of 50.5 kDa. Subsequently, the SQR mRNA expression in different tissues was assessed by real-time reverse transcription and polymerase chain reaction and showed that the highest expression was in midgut, followed by anal sacs and coelomic fluid cells, and then body wall and hindgut. Furthermore, activated SQR was obtained by dilution refolding of recombinant SQR expression in E. coli, and the refolded product showed optimal activity at 37 °C and pH 8.5 and K (m) for ubiquinone and sulfide at 15.6 µM and 40.3 µM, respectively. EDTA and GSH had an activating effect on refolded SQR, while Zn(2+) caused decreased activity. Western blot showed that SQR in vivo was located in mitochondria and was ∼ 10 kDa heavier than the recombinant protein. In addition, SQR, detected by immunohistochemistry, was mainly located in the epithelium of all tissues examined. Ultrastructural observations of these tissues' epithelium by transmission electron microscopy provided indirect cytological evidence for its mitochondrial location. Interesting aspects of the U. unicinctus SQR amino acid sequence, its catalytic mechanism, and the different roles of these tissues in sulfide metabolic adaptation are also discussed. PMID:20419499

  6. Determination of low level sulfides in environmental waters by automated gas dialysis/methylene blue colorimetry

    SciTech Connect

    Francom, D. Goodwin, L.R.; Dieken, F.P. )

    1990-01-01

    A sensitive and rapid automated method has been developed for the selective analysis of acid extractable sulfide in environmental samples by combining gas dialysis separation techniques with methylene blue detection procedures. Acid extractable sulfide is separated from the sample matrix by the gas dialysis membrane and subsequently trapped in a dilute sodium hydroxide receiving stream. This stream is reacted with N,N-dimethyl-p-phenylenediamine and ferric chloride to produce methylene blue which is then quantitated colorimetrically at 660 nm. For standards and nonturbid environmental samples, there is good agreement between the results obtained by this procedure and the standard methylene blue method. The effect of interferences on the accurate determination of sulfide by both methods was also examined and it was found that cupric ions significantly interfered with sulfide estimation. To obtain adequate sulfide recoveries in tap water and environmental samples ascorbic acid must be added as an antioxidant. A detection limit of 2 {mu}g/L of sulfide has been obtained using this procedure.

  7. Food price volatility

    PubMed Central

    Gilbert, C. L.; Morgan, C. W.

    2010-01-01

    The high food prices experienced over recent years have led to the widespread view that food price volatility has increased. However, volatility has generally been lower over the two most recent decades than previously. Variability over the most recent period has been high but, with the important exception of rice, not out of line with historical experience. There is weak evidence that grains price volatility more generally may be increasing but it is too early to say. PMID:20713400

  8. Effect of Se treatment on the volatile compounds in broccoli.

    PubMed

    Lv, Jiayu; Wu, Jie; Zuo, Jinhua; Fan, Linlin; Shi, Junyan; Gao, Lipu; Li, Miao; Wang, Qing

    2017-02-01

    Broccoli contains high levels of bioactive compounds but deteriorates and senesces easily. In the present study, freshly harvested broccoli was treated with selenite and stored at two different temperatures. The effect of selenite treatment on sensory quality and postharvest physiology were analyzed. Volatile components were assessed by HS-SPME combined with GC-MS and EN. The metabolism of Se and S was also examined. Results indicated that Se treatment had a significant effect on maintaining the sensory quality, suppressing the respiration intensity and ethylene production, as well as increasing the content of Se and decreasing the content of S. In particular, significant differences in the composition of volatile compounds were present between control and Se-treated. The differences were mainly due to differences in alcohols and sulfide compounds. These results demonstrate that Se treatment can have a positive effect on maintaining quality and enhancing its sensory quality through the release of volatile compounds. PMID:27596413

  9. Synergistic Trap Response of the False Stable Fly and Little House Fly (Diptera: Muscidae) to Acetic Acid and Ethanol, Two Principal Sugar Fermentation Volatiles.

    PubMed

    Landolt, Peter J; Cha, Dong H; Zack, Richard S

    2015-10-01

    In an initial observation, large numbers of muscoid flies (Diptera) were captured as nontarget insects in traps baited with solutions of acetic acid plus ethanol. In subsequent field experiments, numbers of false stable fly Muscina stabulans (Fallén) and little house fly Fannia canicularis (L.) trapped with the combination of acetic acid plus ethanol were significantly higher than those trapped with either chemical alone, or in unbaited traps. Flies were trapped with acetic acid and ethanol that had been formulated in the water of the drowning solution of the trap, or dispensed from polypropylene vials with holes in the vial lids for diffusion of evaporated chemical. Numbers of both species of fly captured were greater with acetic acid and ethanol in glass McPhail traps, compared to four other similar wet trap designs. This combination of chemicals may be useful as an inexpensive and not unpleasant lure for monitoring or removing these two pest fly species. PMID:26314021

  10. The loss of the hemoglobin H2S-binding function in annelids from sulfide-free habitats reveals molecular adaptation driven by Darwinian positive selection.

    PubMed

    Bailly, Xavier; Leroy, Riwanon; Carney, Susan; Collin, Olivier; Zal, Franck; Toulmond, Andre; Jollivet, Didier

    2003-05-13

    The hemoglobin of the deep-sea hydrothermal vent vestimentiferan Riftia pachyptila (annelid) is able to bind toxic hydrogen sulfide (H(2)S) to free cysteine residues and to transport it to fuel endosymbiotic sulfide-oxidising bacteria. The cysteine residues are conserved key amino acids in annelid globins living in sulfide-rich environments, but are absent in annelid globins from sulfide-free environments. Synonymous and nonsynonymous substitution analysis from two different sets of orthologous annelid globin genes from sulfide rich and sulfide free environments have been performed to understand how the sulfide-binding function of hemoglobin appeared and has been maintained during the course of evolution. This study reveals that the sites occupied by free-cysteine residues in annelids living in sulfide-rich environments and occupied by other amino acids in annelids from sulfide-free environments, have undergone positive selection in annelids from sulfide-free environments. We assumed that the high reactivity of cysteine residues became a disadvantage when H(2)S disappeared because free cysteines without their natural ligand had the capacity to interact with other blood components, disturb homeostasis, reduce fitness and thus could have been counterselected. To our knowledge, we pointed out for the first time a case of function loss driven by molecular adaptation rather than genetic drift. If constraint relaxation (H(2)S disappearance) led to the loss of the sulfide-binding function in modern annelids from sulfide-free environments, our work suggests that adaptation to sulfide-rich environments is a plesiomorphic feature, and thus that the annelid ancestor could have emerged in a sulfide-rich environment. PMID:12721359

  11. The loss of the hemoglobin H2S-binding function in annelids from sulfide-free habitats reveals molecular adaptation driven by Darwinian positive selection

    PubMed Central

    Bailly, Xavier; Leroy, Riwanon; Carney, Susan; Collin, Olivier; Zal, Franck; Toulmond, André; Jollivet, Didier

    2003-01-01

    The hemoglobin of the deep-sea hydrothermal vent vestimentiferan Riftia pachyptila (annelid) is able to bind toxic hydrogen sulfide (H2S) to free cysteine residues and to transport it to fuel endosymbiotic sulfide-oxidising bacteria. The cysteine residues are conserved key amino acids in annelid globins living in sulfide-rich environments, but are absent in annelid globins from sulfide-free environments. Synonymous and nonsynonymous substitution analysis from two different sets of orthologous annelid globin genes from sulfide rich and sulfide free environments have been performed to understand how the sulfide-binding function of hemoglobin appeared and has been maintained during the course of evolution. This study reveals that the sites occupied by free-cysteine residues in annelids living in sulfide-rich environments and occupied by other amino acids in annelids from sulfide-free environments, have undergone positive selection in annelids from sulfide-free environments. We assumed that the high reactivity of cysteine residues became a disadvantage when H2S disappeared because free cysteines without their natural ligand had the capacity to interact with other blood components, disturb homeostasis, reduce fitness and thus could have been counterselected. To our knowledge, we pointed out for the first time a case of function loss driven by molecular adaptation rather than genetic drift. If constraint relaxation (H2S disappearance) led to the loss of the sulfide-binding function in modern annelids from sulfide-free environments, our work suggests that adaptation to sulfide-rich environments is a plesiomorphic feature, and thus that the annelid ancestor could have emerged in a sulfide-rich environment. PMID:12721359

  12. Trace element siting in iron sulfides from coal determined by secondary ion mass spectrometry

    SciTech Connect

    Wiese, R.G. Jr. ); Muir, I.J.; Fyfe, W.S. )

    1990-01-01

    Intact samples of coal have been analyzed by SIMS (secondary ion mass spectrometry) ion imaging and ion probe techniques for determination of the distribution of trace elements in pyrite and marcasite and in the associated clay minerals. Ion mapping of site-specific concentrations of trace elements is important as one considers the environmental consequences of not only the combustion of coal, but also the disposal of coal-washing plant refuse and the placement of mine spoils during reclamation. Iron sulfides and clays are both involved in the oxidation-hydration reactions that result in the formation of acid waters and the release of trace elements into the ecosystem. Iron sulfides from selected Ohio coals contain site-specific concentrations of Mn, Co, Ni, Cu, As, and Pb. Clay minerals found within and marginal to the sulfides contain V, Cr, and also As and Co. The distribution of trace elements in the sulfides and associated clays clearly is related to microenvironments that existed during the formation of successive parts of the sulfide grains. The sulfide-clay relationships determine the extent to which the sulfides break down in oxidation-hydration reactions.

  13. Effect of high-pressure-moderate-temperature processing on the volatile profile of milk.

    PubMed

    Vazquez-Landaverde, Pedro A; Torres, J Antonio; Qian, Michael C

    2006-11-29

    The effects of high hydrostatic pressure on volatile generation in milk were investigated in this study. Raw milk samples were treated under different pressures (482, 586, and 620 MPa), temperatures (25 and 60 degrees C), and holding times (1, 3, and 5 min). Samples submitted to heat treatments alone (25, 60, and 80 degrees C for 1, 3, and 5 min) were used for comparison. Trace volatile sulfur compounds were analyzed using solid-phase microextraction (SPME) and gas chromatography (GC) with pulsed-flame photometric detection (PFPD), whereas the rest of the volatile compounds were analyzed using SPME-GC with flame ionization detection (FID). Multivariate analysis of variance (MANOVA) and principal component analysis (PCA) were used to study the effect of pressure, temperature, and time on volatile generation. Relative concentration increases of 27 selected volatile compounds were compared to an untreated sample. It was found that pressure, temperature, and time, as well as their interactions, all had significant effects (P < 0.001) on volatile generation in milk. Pressure and time effects were significant at 60 degrees C, whereas their effects were almost negligible at 25 degrees C. The PCA plot indicated that the volatile generation of pressure-heated samples at 60 degrees C was different from that of heated-alone samples. Heat treatment tended to promote the formation of methanethiol, hydrogen sulfide, methyl ketones, and aldehydes, whereas high-pressure treatment favored the formation of hydrogen sulfide and aldehydes. PMID:17117808

  14. On-site Rapid Detection of Trace Non-volatile Inorganic Explosives by Stand-alone Ion Mobility Spectrometry via Acid-enhanced Evaporization

    PubMed Central

    Peng, Liying; Hua, Lei; Wang, Weiguo; Zhou, Qinghua; Li, Haiyang

    2014-01-01

    New techniques for the field detection of inorganic improvised explosive devices (IEDs) are urgently developed. Although ion mobility spectrometry (IMS) has been proved to be the most effective method for screening organic explosives, it still faces a major challenge to detect inorganic explosives owing to their low volatilities. Herein, we proposed a strategy for detecting trace inorganic explosives by thermal desorption ion mobility spectrometry (TD-IMS) with sample-to-sample analysis time less than 5 s based on in-situ acidification on the sampling swabs. The responses for typical oxidizers in inorganic explosives, such as KNO3, KClO3 and KClO4 were at least enhanced by a factor of 3000 and their limits of detection were found to be subnanogram. The common organic explosives and their mixtures with inorganic oxidizers were detected, indicating that the acidification process did not affect the detection of organic explosives. Moreover, the typical inorganic explosives such as black powders, firecrackers and match head could be sensitively detected as well. These results demonstrated that this method could be easily employed in the current deployed IMS for on-site sensitive detection of either inorganic explosives or organic ones. PMID:25318960

  15. On-site rapid detection of trace non-volatile inorganic explosives by stand-alone ion mobility spectrometry via acid-enhanced evaporization.

    PubMed

    Peng, Liying; Hua, Lei; Wang, Weiguo; Zhou, Qinghua; Li, Haiyang

    2014-01-01

    New techniques for the field detection of inorganic improvised explosive devices (IEDs) are urgently developed. Although ion mobility spectrometry (IMS) has been proved to be the most effective method for screening organic explosives, it still faces a major challenge to detect inorganic explosives owing to their low volatilities. Herein, we proposed a strategy for detecting trace inorganic explosives by thermal desorption ion mobility spectrometry (TD-IMS) with sample-to-sample analysis time less than 5 s based on in-situ acidification on the sampling swabs. The responses for typical oxidizers in inorganic explosives, such as KNO3, KClO3 and KClO4 were at least enhanced by a factor of 3000 and their limits of detection were found to be subnanogram. The common organic explosives and their mixtures with inorganic oxidizers were detected, indicating that the acidification process did not affect the detection of organic explosives. Moreover, the typical inorganic explosives such as black powders, firecrackers and match head could be sensitively detected as well. These results demonstrated that this method could be easily employed in the current deployed IMS for on-site sensitive detection of either inorganic explosives or organic ones. PMID:25318960

  16. On-site Rapid Detection of Trace Non-volatile Inorganic Explosives by Stand-alone Ion Mobility Spectrometry via Acid-enhanced Evaporization

    NASA Astrophysics Data System (ADS)

    Peng, Liying; Hua, Lei; Wang, Weiguo; Zhou, Qinghua; Li, Haiyang

    2014-10-01

    New techniques for the field detection of inorganic improvised explosive devices (IEDs) are urgently developed. Although ion mobility spectrometry (IMS) has been proved to be the most effective method for screening organic explosives, it still faces a major challenge to detect inorganic explosives owing to their low volatilities. Herein, we proposed a strategy for detecting trace inorganic explosives by thermal desorption ion mobility spectrometry (TD-IMS) with sample-to-sample analysis time less than 5 s based on in-situ acidification on the sampling swabs. The responses for typical oxidizers in inorganic explosives, such as KNO3, KClO3 and KClO4 were at least enhanced by a factor of 3000 and their limits of detection were found to be subnanogram. The common organic explosives and their mixtures with inorganic oxidizers were detected, indicating that the acidification process did not affect the detection of organic explosives. Moreover, the typical inorganic explosives such as black powders, firecrackers and match head could be sensitively detected as well. These results demonstrated that this method could be easily employed in the current deployed IMS for on-site sensitive detection of either inorganic explosives or organic ones.

  17. Replacive sulfide formation in anhydrite chimneys from the Pacmanus hydrothermal field, Papua New Guinea

    NASA Astrophysics Data System (ADS)

    Los, Catharina; Bach, Wolfgang; Plümper, Oliver

    2016-04-01

    Hydrothermal flow within the oceanic crust is an important process for the exchange of energy and mass between the lithosphere, hydrosphere and biosphere. Infiltrated seawater heats up and interacts with wall rock, causing mineral replacement reactions. These play a large role in the formation of ore deposits; at the discharge zone, a hot, acidic and metal-rich potential ore fluid exits the crust. It mixes with seawater and forms chimneys, built up of sulfate minerals such as anhydrite (CaSO4), which are subsequently replaced by sulfide minerals. Sulfide formation is related to fluid pathways, defined by cracks and pores in the sulfate chimney. Over time, these systems might develop into massive sulfide deposits. The big question is then: how is sulfate-sulfide replacement related to the evolution of rock porosity? To address this question, sulfide-bearing anhydrite chimneys from the Pacmanus hydrothermal field (Manus Basin, Papua New Guinea) were studied using X-ray tomography, EMPA, FIB-SEM and -TEM. The apparently massive anhydrite turns out highly porous on the micro scale, with sulfide minerals in anhydrite cleavage planes and along grain boundaries. The size of the sulfide grains relates to the pores they grew into, suggesting a tight coupling between dissolution (porosity generation) and growth of replacive minerals. Some of the sulfide grains are hollow and apparently used the dissolving anhydrite as a substrate to start growth in a pore. Another mode of sulfide development is aggregates of euhedral pyrite cores surrounded by colloform chalcopyrite. This occurrence implies that fluid pathways have remained open for some time to allow several stages of precipitation during fluid evolution. To start the replacement and to keep it going, porosity generation is crucial. Our samples show that dissolution of anhydrite occurred along pathways where fluid could enter, such as cleavage planes and grain boundaries. It appears that fluids ascending within the inner

  18. Development of novel and sensitive methods for the determination of sulfide in aqueous samples by hydrogen sulfide generation-inductively coupled plasma-atomic emission spectroscopy.

    PubMed

    Colon, M; Todolí, J L; Hidalgo, M; Iglesias, M

    2008-02-25

    Two new, simple and accurate methods for the determination of sulfide (S(2-)) at low levels (microgL(-1)) in aqueous samples were developed. The generation of hydrogen sulfide (H(2)S) took place in a coil where sulfide reacted with hydrochloric acid. The resulting H(2)S was then introduced as a vapor into an inductively coupled plasma-atomic emission spectrometer (ICP-AES) and sulfur emission intensity was measured at 180.669nm. In comparison to when aqueous sulfide was introduced, the introduction of sulfur as H(2)S enhanced the sulfur signal emission. By setting a gas separator at the end of the reaction coil, reduced sulfur species in the form of H(2)S were removed from the water matrix, thus, interferences could be avoided. Alternatively, the gas separator was replaced by a nebulizer/spray chamber combination to introduce the sample matrix and reagents into the plasma. This methodology allowed the determination of both sulfide and sulfate in aqueous samples. For both methods the linear response was found to range from 5microgL(-1) to 25mgL(-1) of sulfide. Detection limits of 5microgL(-1) and 6microgL(-1) were obtained with and without the gas separator, respectively. These new methods were evaluated by comparison to the standard potentiometric method and were successfully applied to the analysis of reduced sulfur species in environmental waters. PMID:18261510

  19. SEED DETERIORATION INCREASES IN THE PRESENCE OF VOLATILES

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Seeds of culinary importance emit low molecular weight carbonyl compounds that can be detected as volatiles in the surrounding air. Volatile carbonyl molecules are byproducts of cascading peroxidative reactions and can be highly reactive against proteins, lipids and nucleic acids. Carum carvi L. pro...

  20. Marine diagenesis of hydrothermal sulfide

    SciTech Connect

    Moammar, M.O.

    1985-01-01

    An attempt is made to discuss the artificial and natural oxidation and hydrolysis of hydrothermal sulfide upon interaction with normal seawater. Synthetic and natural ferrosphalerite particles used in kinetic oxidation and hydrolysis studies in seawater develop dense, crystalline coatings consisting of ordered and ferrimagnetic delta-(Fe, Zn)OOH. Due to the formation of this reactive diffusion barrier, the release of Zn into solution decreases rapidly, and sulfide oxidation is reduced to a low rate determined by the diffusion of oxygen through the oxyhydroxide film. This also acts as an efficient solvent for ions such as Zn/sup 2 +/, Ca/sup 2 +/, and possibly Cd/sup 2 +/, which contribute to the stabilization of the delta-FeOOH structure. The oxidation of sulfide occurs in many seafloor spreading areas, such as 21/sup 0/N on the East Pacific Ridge. In these areas the old surface of the sulfide chimneys are found to be covered by an orange stain, and sediment near the base of nonactive vents is also found to consist of what has been referred to as amorphous iron oxide and hydroxide. This thesis also discusses the exceedingly low solubility of zinc in seawater, from delta-(Fe, Zn)OOH and the analogous phase (zinc-ferrihydroxide) and the zinc exchange minerals, 10-A manganate and montmorillonite. The concentrations of all four are of the same magnitude (16, 36.4, and 12 nM, respectively) as the zinc concentration in deep ocean water (approx. 10 nM), which suggests that manganates and montmorillonite with iron oxyhydroxides control zinc concentration in the deep ocean.

  1. Sulfide-Driven Microbial Electrosynthesis

    SciTech Connect

    Gong, YM; Ebrahim, A; Feist, AM; Embree, M; Zhang, T; Lovley, D; Zengler, K

    2013-01-01

    Microbial electrosynthesis, the conversion of carbon dioxide to organic molecules using electricity, has recently been demonstrated for acetogenic microorganisms, such as Sporomusa ovata. The energy for reduction of carbon dioxide originates from the hydrolysis of water on the anode, requiring a sufficiently low potential. Here we evaluate the use of sulfide as an electron source for microbial electrosynthesis. Abiotically oxidation of sulfide on the anode yields two electrons. The oxidation product, elemental sulfur, can be further oxidized to sulfate by Desulfobulbus propionicus, generating six additional electrons in the process. The eight electrons generated from the combined abiotic and biotic steps were used to reduce carbon dioxide to acetate on a graphite cathode by Sporomusa ovata at a rate of 24.8 mmol/day.m(2). Using a strain of Desulfuromonas as biocatalyst on the anode resulted in an acetate production rate of 49.9 mmol/day.m(2), with a Coulombic efficiency of over 90%. These results demonstrate that sulfide can serve effectively as an alternative electron donor for microbial electrosynthesis.

  2. Effects of pH control and concentration on microbial oil production from Chlorella vulgaris cultivated in the effluent of a low-cost organic waste fermentation system producing volatile fatty acids.

    PubMed

    Cho, Hyun Uk; Kim, Young Mo; Choi, Yun-Nam; Xu, Xu; Shin, Dong Yun; Park, Jong Moon

    2015-05-01

    The objective of this study was to investigate the feasibility of applying volatile fatty acids (VFAs) produced from low-cost organic waste to the major carbon sources of microalgae cultivation for highly efficient biofuel production. An integrated process that consists of a sewage sludge fermentation system producing VFAs (SSFV) and mixotrophic cultivation of Chlorella vulgaris (C. vulgaris) was operated to produce microbial lipids economically. The effluents from the SSFV diluted to different concentrations at the level of 100%, 50%, and 15% were prepared for the C. vulgaris cultivation and the highest biomass productivity (433±11.9 mg/L/d) was achieved in the 100% culture controlling pH at 7.0. The harvested biomass included lipid contents ranging from 12.87% to 20.01% under the three different effluent concentrations with and without pH control. The composition of fatty acids from C. vulgaris grown on the effluents from the SSFV complied with the requirements of high-quality biodiesel. These results demonstrated that VFAs produced from the SSFV are favorable carbon sources for cultivating C. vulgaris. PMID:25280600

  3. Iron sulfide as a water-deposited scale in sour gas wells

    SciTech Connect

    Claassen, E.J.

    1988-01-01

    Iron is soluble in reservoir waters which have high salinity and high hydrogen sulfide content. As the well produces, iron sulfide is precipitated due to the drop in pressure with the resultant increase in pH. The crystallines attach to the lower portion of the tubing, where either bimetallic or crevice corrosion occur beneath the crystallines. Gas condensate wells deposit a high molecular weight material, such as asphaltene, on the iron sulfide crystallites as they deposit. Under these conditions the scale cannot be removed by hydrochloric acid, surfactants, or chelating agents. Corrosion of the metal continues if the combination layer of iron sulfide and asphaltene is cracked, porous, or spalls, but stops if the layer is dense and non-friable. The layer of scale can be removed only by mechanical means, or by removing the binder chemically.

  4. Simple and specific colorimetric detection of Staphylococcus using its volatile 2-[3-acetoxy-4,4,14-trimethylandrost-8-en-17-yl] propanoic acid in the liquid phase and head space of cultures.

    PubMed

    Saranya, Raju; Aarthi, Raju; Sankaran, Krishnan

    2015-05-01

    Spread of drug-resistant Staphylococcus spp. into communities pose danger demanding effective non-invasive and non-destructive tools for its early detection and surveillance. Characteristic volatile organic compounds (VOCs) produced by bacteria offer new diagnostic targets and novel approaches not exploited so far in infectious disease diagnostics. Our search for such characteristic VOC for Staphylococcus spp. led to the depiction of 2-[3-acetoxy-4,4,14-trimethylandrost-8-en-17-yl] propanoic acid (ATMAP), a moderately volatile compound detected both in the culture and headspace when the organism was grown in tryptone soya broth (TSB) medium. A simple and inexpensive colorimetric method (colour change from yellow to orange) using methyl red as the pH indicator provided an absolutely specific way for identifying Staphylococcus spp., The assay performed in liquid cultures (7-h growth in TSB) as well as in the headspace of plate cultures (grown for 10 h on TSA) was optimised in a 96-well plate and 12-well plate formats, respectively, employing a set of positive and negative strains. Only Staphylococcus spp. showed the distinct colour change from yellow to orange due to the production of the above VOC while in the case of other organisms, the reagent remained yellow. The method validated using known clinical and environmental strains (56 including Staphylococcus, Proteus, Pseudomonas, Klebsiella, Bacillus, Shigella and Escherichia coli) was found to be highly efficient showing 100% specificity and sensitivity. Such simple methods of bacterial pathogen identification are expected to form the next generation tools for the control of infectious diseases through early detection and surveillance of causative agents. PMID:25900191

  5. Dichloromethyl alkyl ethers and sulfides in the Reformatskii reaction

    SciTech Connect

    Lapkin, I.I.; Fotin, V.V.

    1986-09-10

    A study was carried out on the reaction of dichloromethyl alkyl ethers and sulfides with ..cap alpha..-brominated esters in the presence of zinc resulting in the formation of either ..cap alpha..-alkyl-..beta..-alkoxyacrylates (or ..cap alpha..-alkyl-..beta..-alkylthioacrylates) or ..cap alpha..,..cap alpha..,..cap alpha..',..cap alpha..'-tetramethyl-..beta..-alkoxyglutaric acid (or ..cap alpha..,..cap alpha..,..cap alpha..',..cap alpha..'-tetramethyl-..beta..-alkylthioglutaric acid) depending on the structure of the starting bromoester. PMR and IR spectroscopy indicates the geometry of the ..cap alpha..-alkyl-..beta..-alkoxyacrylates and ..cap alpha..-alkyl-..beta..-alkylthioacrylates.

  6. Selenium Uptake and Volatilization by Marine Algae

    NASA Astrophysics Data System (ADS)

    Luxem, Katja E.; Vriens, Bas; Wagner, Bettina; Behra, Renata; Winkel, Lenny H. E.

    2015-04-01

    Selenium (Se) is an essential trace nutrient for humans. An estimated one half to one billion people worldwide suffer from Se deficiency, which is due to low concentrations and bioavailability of Se in soils where crops are grown. It has been hypothesized that more than half of the atmospheric Se deposition to soils is derived from the marine system, where microorganisms methylate and volatilize Se. Based on model results from the late 1980s, the atmospheric flux of these biogenic volatile Se compounds is around 9 Gt/year, with two thirds coming from the marine biosphere. Algae, fungi, and bacteria are known to methylate Se. Although algal Se uptake, metabolism, and methylation influence the speciation and bioavailability of Se in the oceans, these processes have not been quantified under environmentally relevant conditions and are likely to differ among organisms. Therefore, we are investigating the uptake and methylation of the two main inorganic Se species (selenate and selenite) by three globally relevant microalgae: Phaeocystis globosa, the coccolithophorid Emiliania huxleyi, and the diatom Thalassiosira oceanica. Selenium uptake and methylation were quantified in a batch experiment, where parallel gas-tight microcosms in a climate chamber were coupled to a gas-trapping system. For E. huxleyi, selenite uptake was strongly dependent on aqueous phosphate concentrations, which agrees with prior evidence that selenite uptake by phosphate transporters is a significant Se source for marine algae. Selenate uptake was much lower than selenite uptake. The most important volatile Se compounds produced were dimethyl selenide, dimethyl diselenide, and dimethyl selenyl sulfide. Production rates of volatile Se species were larger with increasing intracellular Se concentration and in the decline phase of the alga. Similar experiments are being carried out with P. globosa and T. oceanica. Our results indicate that marine algae are important for the global cycling of Se

  7. The effect of flooding on the exchange of the volatile C2-compounds ethanol, acetaldehyde and acetic acid between leaves of Amazonian floodplain tree species and the atmosphere

    NASA Astrophysics Data System (ADS)

    Rottenberger, S.; Kleiss, B.; Kuhn, U.; Wolf, A.; Piedade, M. T. F.; Junk, W.; Kesselmeier, J.

    2008-08-01

    The effect of root inundation on the leaf emissions of ethanol, acetaldehyde and acetic acid in relation to assimilation and transpiration was investigated with 2 3 years old tree seedlings of four Amazonian floodplain species by applying dynamic cuvette systems under greenhouse conditions. Emissions were monitored over a period of several days of inundation using a combination of Proton Transfer Reaction Mass Spectrometry (PTR-MS) and conventional techniques (HPLC, ion chromatography). Under non-flooded conditions, none of the species exhibited measurable emissions of any of the compounds, but rather low deposition of acetaldehyde and acetic acid was observed instead. Tree species specific variations in deposition velocities were largely due to variations in stomatal conductance. Flooding of the roots resulted in leaf emissions of ethanol and acetaldehyde by all species, while emissions of acetic acid were only observed from the species exhibiting the highest ethanol and acetaldehyde emission rates. All three compounds showed a similar diurnal emission profile, each displaying an emission burst in the morning, followed by a decline in the evening. This concurrent behavior supports the conclusion, that all three compounds emitted by the leaves are derived from ethanol produced in the roots by alcoholic fermentation, transported to the leaves with the transpiration stream and finally partly converted to acetaldehyde and acetic acid by enzymatic processes. Co-emissions and peaking in the early morning suggest that root ethanol, after transportation with the transpiration stream to the leaves and enzymatic oxidation to acetaldehyde and acetate, is the metabolic precursor for all compounds emitted, though we can not totally exclude other production pathways. Emission rates substantially varied among tree species, with maxima differing by up to two orders of magnitude (25 1700 nmol m-2 min-1 for ethanol and 5 500 nmol m-2 min-1 for acetaldehyde). Acetic acid emissions

  8. The effect of flooding on the exchange of the volatile C2-compounds ethanol, acetaldehyde and acetic acid between leaves of Amazonian floodplain tree species and the atmosphere

    NASA Astrophysics Data System (ADS)

    Rottenberger, S.; Kleiss, B.; Kuhn, U.; Wolf, A.; Piedade, M. T. F.; Junk, W.; Kesselmeier, J.

    2008-02-01

    The effect of root inundation on the leaf emissions of ethanol, acetaldehyde and acetic acid was investigated with 2-3 years old tree seedlings of four Amazonian floodplain species by applying dynamic cuvette systems under greenhouse conditions. Emissions were monitored over a period of several days of inundation using a combination of Proton Transfer Reaction Mass Spectrometry (PTR-MS) and conventional techniques (HPLC, ion chromatography). Under non-flooded conditions, none of the species exhibited significant emissions of any of the compounds. A slight deposition of acetaldehyde and acetic acid was mainly observed, instead. Tree species specific variations in deposition velocities were largely due to variations in stomatal conductance. Flooding of the roots resulted in leaf emissions of ethanol and acetaldehyde by all species, while emissions of acetic acid occurred only by the species exhibiting the highest ethanol and acetaldehyde emission rates. All three compounds showed a similar diurnal emission profile, each displaying an emission burst in the morning, followed by a decline in the evening. This concurrent behavior supports the conclusion, that all three compounds emitted by the leaves are derived from ethanol produced in the roots by alcoholic fermentation, transported to the leaves with the transpiration stream and finally partly converted to acetaldehyde and acetic acid by enzymatic processes. Co-emissions and peaking in the early morning confirmed that root ethanol, after transportation with the transpiration stream to the leaves and enzymatic oxidation to acetaldehyde and acetate, is the metabolic precursor for all compounds emitted. Emission rates substantially varied among tree species, with maxima differing by up to two orders of magnitude (3-200 nmol m-2 min-1 for ethanol and 5-500 nmol m-2 min-1 for acetaldehyde). Acetic acid emissions reached 12 nmol m-2 min-1. The observed differences in emission rates between the tree species are discussed

  9. 30 CFR 250.504 - Hydrogen sulfide.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 2 2013-07-01 2013-07-01 false Hydrogen sulfide. 250.504 Section 250.504... § 250.504 Hydrogen sulfide. When a well-completion operation is conducted in zones known to contain hydrogen sulfide (H2S) or in zones where the presence of H2S is unknown (as defined in § 250.490 of...

  10. 30 CFR 250.604 - Hydrogen sulfide.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 2 2014-07-01 2014-07-01 false Hydrogen sulfide. 250.604 Section 250.604... § 250.604 Hydrogen sulfide. When a well-workover operation is conducted in zones known to contain hydrogen sulfide (H2S) or in zones where the presence of H2S is unknown (as defined in § 250.490 of...

  11. 30 CFR 250.504 - Hydrogen sulfide.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 2 2012-07-01 2012-07-01 false Hydrogen sulfide. 250.504 Section 250.504... § 250.504 Hydrogen sulfide. When a well-completion operation is conducted in zones known to contain hydrogen sulfide (H2S) or in zones where the presence of H2S is unknown (as defined in § 250.490 of...

  12. 30 CFR 250.604 - Hydrogen sulfide.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 2 2012-07-01 2012-07-01 false Hydrogen sulfide. 250.604 Section 250.604... § 250.604 Hydrogen sulfide. When a well-workover operation is conducted in zones known to contain hydrogen sulfide (H2S) or in zones where the presence of H2S is unknown (as defined in § 250.490 of...

  13. 30 CFR 250.604 - Hydrogen sulfide.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 2 2013-07-01 2013-07-01 false Hydrogen sulfide. 250.604 Section 250.604... § 250.604 Hydrogen sulfide. When a well-workover operation is conducted in zones known to contain hydrogen sulfide (H2S) or in zones where the presence of H2S is unknown (as defined in § 250.490 of...

  14. 30 CFR 250.504 - Hydrogen sulfide.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 2 2014-07-01 2014-07-01 false Hydrogen sulfide. 250.504 Section 250.504... § 250.504 Hydrogen sulfide. When a well-completion operation is conducted in zones known to contain hydrogen sulfide (H2S) or in zones where the presence of H2S is unknown (as defined in § 250.490 of...

  15. Volatile aldehydes in libraries and archives

    NASA Astrophysics Data System (ADS)

    Fenech, Ann; Strlič, Matija; Kralj Cigić, Irena; Levart, Alenka; Gibson, Lorraine T.; de Bruin, Gerrit; Ntanos, Konstantinos; Kolar, Jana; Cassar, May

    2010-06-01

    Volatile aldehydes are produced during degradation of paper-based materials. This may result in their accumulation in archival and library repositories. However, no systematic study has been performed so far. In the frame of this study, passive sampling was carried out at ten locations in four libraries and archives. Despite the very variable sampling locations, no major differences were found, although air-filtered repositories were found to have lower concentrations while a non-ventilated newspaper repository exhibited the highest concentrations of volatile aldehydes (formaldehyde, acetaldehyde, furfural and hexanal). Five employees in one institution were also provided with personal passive samplers to investigate employees' exposure to volatile aldehydes. All values were lower than the presently valid exposure limits. The concentration of volatile aldehydes, acetic acid, and volatile organic compounds (VOCs) in general was also compared with that of outdoor-generated pollutants. It was evident that inside the repository and particularly inside archival boxes, the concentration of VOCs and acetic acid was much higher than the concentration of outdoor-generated pollutants, which are otherwise more routinely studied in connection with heritage materials. This indicates that further work on the pro-degradative effect of VOCs on heritage materials is necessary and that monitoring of VOCs in heritage institutions should become more widespread.

  16. Layered metal sulfides: Exceptionally selective agents for radioactive strontium removal

    PubMed Central

    Manos, Manolis J.; Ding, Nan; Kanatzidis, Mercouri G.

    2008-01-01

    In this article, we report the family of robust layered sulfides K2xMnxSn3-xS6 (x = 0.5–0.95) (KMS-1). These materials feature hexagonal [MnxSn3-xS6]2x− slabs of the CdI2 type and contain highly mobile K+ ions in their interlayer space that are easily exchangeable with other cations and particularly strontium. KMS-1 display outstanding preference for strontium ions in highly alkaline solutions containing extremely large excess of sodium cations as well as in acidic environment where most alternative adsorbents with oxygen ligands are nearly inactive. The implication of these results is that simple layered sulfides should be considered for the efficient remediation of certain nuclear wastes. PMID:18316731

  17. A study of the trace sulfide mineral assemblages in the Stillwater Complex, Montana, USA

    NASA Astrophysics Data System (ADS)

    Aird, Hannah M.; Ferguson, Katherine M.; Lehrer, Malia L.; Boudreau, Alan E.

    2016-07-01

    The sulfide assemblages of the Stillwater Complex away from the well-studied ore zones are composed mainly of variable proportions of pyrrhotite, chalcopyrite, pentlandite, and ±pyrite. Excluding vein assemblages and those affected by greenschist and lower temperature alteration, the majority can be classified into two broad assemblages, defined here as pristine (multiphase, often globular in shape) or volatile-bearing (multiphase, high-temperature, volatile-rich minerals such as biotite, hornblende, or an unmixed calcite-dolomite assemblage). The volatile-bearing assemblages are mainly found within and below the J-M reef, where native copper and sphalerite are also locally present. Pristine sulfides are found throughout the stratigraphy. Both groups can be affected by apparent S loss in the form of pyrite being converted to magnetite and chalcopyrite to a Cu-Fe-oxide (delafossite), with little to no silicate alteration. An upward trend from pentlandite-rich to pyrrhotite-rich to pyrite-rich assemblages is observed in the footwall rocks in upper GN-I, and the same trend repeats from just below the reef and continues into the overlying N-II and GN-II. Modeling suggests that the sulfide Ni in the Peridotite Zone is largely controlled by silicate Ni. When taken together, observations are most readily explained by the remobilization of selected elements by a high-temperature fluid with the apparent loss of S > Cu > Ni. This could concentrate ore metals by vapor refining, eventually producing a platinum group element-enriched sulfide ore zone, such as the J-M reef.

  18. Rapid Synthesis of Nonstoichiometric Lanthanum Sulfide

    NASA Technical Reports Server (NTRS)

    Matsuda, S.; Shapiro, E.; Danielson, L.; Hardister, H.

    1987-01-01

    New process relatively fast and simple. Improved method of synthesizing nonstoichiometric lanthanum sulfide faster and simpler. Product purer because some of prior sources of contamination eliminated.

  19. The quinone-binding site of Acidithiobacillus ferrooxidans sulfide: quinone oxidoreductase controls both sulfide oxidation and quinone reduction.

    PubMed

    Zhang, Yanfei; Qadri, Ali; Weiner, Joel H

    2016-04-01

    Sulfide:quinone oxidoreductase (SQR) is a peripheral membrane enzyme that catalyzes the oxidation of sulfide and the reduction of ubiquinone. Ubiquinone binds to a conserved hydrophobic domain and shuttles electrons from a noncovalent flavin adenine dinucleotide cofactor to the membrane-bound quinone pool. Utilizing the structure of decylubiquinone bound to Acidithiobacillus ferrooxidans SQR, we combined site-directed mutagenesis and kinetic approaches to analyze quinone binding. SQR can reduce both benzoquinones and naphthoquinones. The alkyl side-chain of ubiquinone derivatives enhances binding to SQR but limits the enzyme turnover. Pentachlorophenol and 2-n-heptyl-4-hydroxyquinoline-N-oxide are potent inhibitors of SQR with apparent inhibition constants (Ki) of 0.46 μmol·L(-1) and 0.58 μmol·L(-1), respectively. The highly conserved amino acids surrounding the quinone binding site play an important role in quinone reduction. The phenyl side-chains of Phe357 and Phe391 sandwich the benzoquinone head group and are critical for quinone binding. Importantly, conserved amino acids that define the ubiquinone-binding site also play an important role in sulfide oxidation/flavin reduction. PMID:26914540

  20. Laboratory SIP signatures associated with oxidation of disseminated metal sulfides.

    PubMed

    Placencia-Gómez, Edmundo; Slater, Lee; Ntarlagiannis, Dimitrios; Binley, Andrew

    2013-05-01

    Oxidation of metal sulfide minerals is responsible for the generation of acidic waters rich in sulfate and metals. When associated with the oxidation of sulfide ore mine waste deposits the resulting pore water is called acid mine drainage (AMD); AMD is a known environmental problem that affects surface and ground waters. Characterization of oxidation processes in-situ is challenging, particularly at the field scale. Geophysical techniques, spectral induced polarization (SIP) in particular, may provide a means of such investigation. We performed laboratory experiments to assess the sensitivity of the SIP method to the oxidation mechanisms of common sulfide minerals found in mine waste deposits, i.e., pyrite and pyrrhotite, when the primary oxidant agent is dissolved oxygen. We found that SIP parameters, e.g., phase shift, the imaginary component of electrical conductivity and total chargeability, decrease as the time of exposure to oxidation and oxidation degree increase. This observation suggests that dissolution-depletion of the mineral surface reduces the capacitive properties and polarizability of the sulfide minerals. However, small increases in the phase shift and imaginary conductivity do occur during oxidation. These transient increases appear to correlate with increases of soluble oxidizing products, e.g., Fe(2+) and Fe(3+) in solution; precipitation of secondary minerals and the formation of a passivating layer to oxidation coating the mineral surface may also contribute to these increases. In contrast, the real component of electrical conductivity associated with electrolytic, electronic and interfacial conductance is sensitive to changes in the pore fluid chemistry as a result of the soluble oxidation products released (Fe(2+) and Fe(3+)), particularly for the case of pyrrhotite minerals. PMID:23531431