Science.gov

Sample records for acidic surface patch

  1. HotPatch Web Gateway: Statistical Analysis of Unusual Patches on Protein Surfaces

    DOE Data Explorer

    Pettit, Frank K.; Bowie, James U. [DOE-Molecular Biology Institute

    HotPatch finds unusual patches on the surface of proteins, and computes just how unusual they are (patch rareness), and how likely each patch is to be of functional importance (functional confidence (FC).) The statistical analysis is done by comparing your protein's surface against the surfaces of a large set of proteins whose functional sites are known. Optionally, HotPatch can also write a script that will display the patches on the structure, when the script is loaded into some common molecular visualization programs. HotPatch generates complete statistics (functional confidence and patch rareness) on the most significant patches on your protein. For each property you choose to analyze, you'll receive an email to which will be attached a PDB-format file in which atomic B-factors (temp. factors) are replaced by patch indices; and the PDB file's Header Remarks will give statistical scores and a PDB-format file in which atomic B-factors are replaced by the raw values of the property used for patch analysis (for example, hydrophobicity instead of hydrophobic patches). [Copied with edits from http://hotpatch.mbi.ucla.edu/

  2. Wear resistance and surface roughness of a newly devised adhesive patch for sealing smooth enamel surfaces.

    PubMed

    Schmidlin, Patrick R; Göhring, Till N; Roos, Malgorzata; Zehnder, Matthias

    2006-01-01

    A laboratory study assessed the wear resistance and surface roughness after chemical and mechanical wear of a newly devised adhesive patch when used as a smooth surface sealant. Forty-eight enamel discs were prepared from bovine lower central incisors. Sixteen specimens were treated with one of two sealing options: the prototype of an adhesive patch or a flowable resin. Unsealed enamel served as the positive control. Wear and surface roughness was measured at baseline and after all the samples were immersed in saliva or lactic acid (n=8 per treatment group) for up to 21 days, during which the experimental and control enamel surfaces were exposed to 10 double-stroke toothbrush cycles per day. In saliva and lactic acid, the sealed specimens showed no significant wear during the observation period (p=0.1841). Only untreated specimens exposed to lactic acid showed a significant substance loss after 14 and 21 days (p=0.0186). The patch and flowable resin showed no differences in surface roughness values at respective times (p=0.385); whereas the surface roughness of the unsealed specimens in lactic acid was significantly higher (p<0.0001). It was concluded that the adhesive patch under investigation merits further study to assess its potential as a sealant for smooth enamel surfaces. PMID:16536202

  3. Patch-fitting on triangular surface holes

    NASA Astrophysics Data System (ADS)

    Savva, A.; Stylianou, V.

    2014-11-01

    The human body is probably the best example of a complex deformable figure. To generate a realistic object is a complex task and some mathematical methods are necessary in order to assist solving this problem. Spline methods have dominated the area of modeling complex articulated figures. The most popular of these methods is NURBS (Non Uniform Rational B-Splines) which is used by the majority of figure modelers due to its ability to control the shape of a surface by applying weights on the control points defining the object and not by altering their positions. However, spline methods, such as NURBS, have a drawback in defining surfaces containing multiple branches. The resulting surface has an "n-sided hole" at the joint of n branches. This paper proposes a solution to the triangular holes problem, which however, can be generalized to solve the n-sided-hole problem. The method fits a Sabin triangular patch in the hole and then applies subdivision spline methods to generate smooth and closed surfaces.

  4. Membrane Vibration Tests Using Surface-Bonded Piezoelectric Patch Actuation

    NASA Technical Reports Server (NTRS)

    Gasper, James L.; Pappa, Richard S.

    2003-01-01

    This paper describes the status of on-going work at the NASA Langley Research Center to measure the dynamics of thin membranes. The test article is a one-meter square pre-tensioned Kapton membrane that incorporates small surface-bonded piezoelectric patches strategically positioned to excite many modes. It is shown that PVDF (polyvinylidene fluoride) and MFC (macro fiber composite) piezoelectric patch actuators provide adequate excitation energy to obtain modal frequencies and mode shapes. Results from modal tests performed on the membrane using piezoelectric patches of different sizes and positions are discussed.

  5. Development and in vitro evaluation of a transdermal hydrogel patch for ferulic acid.

    PubMed

    Bai, Jie; Lu, Yang; Li, Peng-yue; Liu, Cong-min; Wu, Hui-chao; Wen, Ran; Du, Shou-ying

    2014-03-01

    Current work aimed to develop and evaluate a transdermal delivery system of hydrogel patch for ferulic acid to treat skin damage induced by UV radiation. VISCOMATE(TM) NP700, dihydroxy aluminium aminoacetate, glycerine, tartaric acid were used in combination in different ratios to design the hydrogel patch. In vitro release rate was selected as an index to optimize the formulation. The formulated hydrogel patch was evaluated by several parameters like tacking strength, cohesive strength, peeling strength, residuals after peeling and drug content determination. The in vitro penetration was determined by Franz diffusion technology with hairless mouse skin as permeability media. Different kinetics models were employed to simulate the release and penetrate patterns of ferulic acid from patches in order to investigate the drug transport mechanism. The residual drugs in the patch and skin were determined after the penetration experiment. The optimized preparation was dihydroxy aluminium aminoacetate: NP700: glycerine: ferulic acid as a ratio of 0.02:0.4:1.5:1.25:0.25. The cumulative percentage of release was 60.4465±1.7679% for 24h, which results from a combination of diffusion effect and polymer erosion effect. For the barrier of stratum corneum, the cumulative penetrate rate was only 1.3156±0.3588% and the release mechanism turn out to be the effect of erosion of polymer surface. The residual drugs in the patch were 97.5949±1.4932%. The in vitro data revealed that it was easy for ferulic acid to release from the paste while difficult to permeate through the skin barrier, which resulted in most of drugs residued in the paste. Hence, further experiments will be necessary for finding the penetration enhancer in ferulic acid transdermal delivery. PMID:24577928

  6. Watertight Anisotropic Surface Meshing Using Quadrilateral Patches

    NASA Technical Reports Server (NTRS)

    Haimes, Robert; Aftosmis, Michael J.

    2004-01-01

    This paper presents a simple technique for generating anisotropic surface triangulations using unstructured quadrilaterals when the CAD entity can be mapped to a logical rectangle. Watertightness and geometric quality measures are maintained and are consistent with the CAPRI default tessellator. These triangulations can match user specified criteria for chord-height tolerance, neighbor triangle dihedral angle, and maximum triangle side length. This discrete representation has hooks back to the owning geometry and therefore can be used in conjunction with these entities to allow for easy enhancement or modification of the tessellation suitable for grid generation or other downstream applications.

  7. Resolving Magnetic Flux Patches at the Surface of the Core

    NASA Technical Reports Server (NTRS)

    OBrien, Michael S.

    1996-01-01

    The geomagnetic field at a given epoch can be used to partition the surface of the liquid outer core into a finite number of contiguous regions in which the radial component of the magnetic flux density, B (sub r), is of one sign. These flux patches are instrumental in providing detail to surface fluid flows inferred from the changing geomagnetic field and in evaluating the validity of the frozen-flux approximation on which such inferences rely. Most of the flux patches in models of the modem field are small and enclose little flux compared to the total unsigned flux emanating from the core. To demonstrate that such patches are not required to explain the most spatially complete and accurate data presently available, those from the Magsat mission, I have constructed a smooth core field model that fits the Magsat data but does not possess small flux patches. I conclude that our present knowledge of the geomagnetic field does not allow us to resolve these features reliably at the core-mantle boundary; thus we possess less information about core flow than previously believed.

  8. Patched bimetallic surfaces are active catalysts for ammonia decomposition

    PubMed Central

    Guo, Wei; Vlachos, Dionisios G.

    2015-01-01

    Ammonia decomposition is often used as an archetypical reaction for predicting new catalytic materials and understanding the very reason of why some reactions are sensitive on material's structure. Core–shell or surface-segregated bimetallic nanoparticles expose outstanding activity for many heterogeneously catalysed reactions but the reasons remain elusive owing to the difficulties in experimentally characterizing active sites. Here by performing multiscale simulations in ammonia decomposition on various nickel loadings on platinum (111), we show that the very high activity of core–shell structures requires patches of the guest metal to create and sustain dual active sites: nickel terraces catalyse N−H bond breaking and nickel edge sites drive atomic nitrogen association. The structure sensitivity on these active catalysts depends profoundly on reaction conditions due to kinetically competing relevant elementary reaction steps. We expose a remarkable difference in active sites between transient and steady-state studies and provide insights into optimal material design. PMID:26443525

  9. Patched bimetallic surfaces are active catalysts for ammonia decomposition

    SciTech Connect

    Guo, Wei; Vlachos, Dionisios G.

    2015-10-07

    In this study, ammonia decomposition is often used as an archetypical reaction for predicting new catalytic materials and understanding the very reason of why some reactions are sensitive on material’s structure. Core–shell or surface-segregated bimetallic nanoparticles expose outstanding activity for many heterogeneously catalysed reactions but the reasons remain elusive owing to the difficulties in experimentally characterizing active sites. Here by performing multiscale simulations in ammonia decomposition on various nickel loadings on platinum (111), we show that the very high activity of core–shell structures requires patches of the guest metal to create and sustain dual active sites: nickel terraces catalyse N-H bond breaking and nickel edge sites drive atomic nitrogen association. The structure sensitivity on these active catalysts depends profoundly on reaction conditions due to kinetically competing relevant elementary reaction steps. We expose a remarkable difference in active sites between transient and steady-state studies and provide insights into optimal material design.

  10. Patched bimetallic surfaces are active catalysts for ammonia decomposition

    DOE PAGESBeta

    Guo, Wei; Vlachos, Dionisios G.

    2015-10-07

    In this study, ammonia decomposition is often used as an archetypical reaction for predicting new catalytic materials and understanding the very reason of why some reactions are sensitive on material’s structure. Core–shell or surface-segregated bimetallic nanoparticles expose outstanding activity for many heterogeneously catalysed reactions but the reasons remain elusive owing to the difficulties in experimentally characterizing active sites. Here by performing multiscale simulations in ammonia decomposition on various nickel loadings on platinum (111), we show that the very high activity of core–shell structures requires patches of the guest metal to create and sustain dual active sites: nickel terraces catalyse N-Hmore » bond breaking and nickel edge sites drive atomic nitrogen association. The structure sensitivity on these active catalysts depends profoundly on reaction conditions due to kinetically competing relevant elementary reaction steps. We expose a remarkable difference in active sites between transient and steady-state studies and provide insights into optimal material design.« less

  11. Short deoxyribonucleic acid repair patch length in Escherichia coli is determined by the processive mechanism of deoxyribonucleic acid polymerase I.

    PubMed Central

    Matson, S W; Bambara, R A

    1981-01-01

    The lengths of ultraviolet irradiation-induced repair resynthesis patches were measured in repair-competent extracts of Escherichia coli. Extracts containing wild-type deoxyribonucleic acid (DNA) polymerase I introduced a patch 15 to 20 nucleotides in length during repair of ColE1 plasmid DNA; extracts containing the polA5 mutant form of DNA polymerase I introduced a patch only about 5 nucleotides in length in a similar reaction. The repair patch length in the presence of either DNA polymerase corresponded to the processivity of that polymerase (the average number of nucleotides added per enzyme-DNA binding event) as determined with purified enzymes and DNA treated with a nonspecific endonuclease. The base composition of the repair patch inserted by the wild-type DNA polymerase was similar to that of the bacterial genome, whereas the patch inserted by the mutant enzyme was skewed toward greater pyrimidine incorporation. This skewing is expected, considering the predominance of pyrimidine incorporation occurring at the ultraviolet lesion and the short patch made by the mutant enzyme. Since the defect in the polA5 DNA polymerase which causes premature dissociation from DNA is reflected exactly in the repair patch length, the processive mechanism of the polymerase must be a central determinant of patch length. PMID:7012116

  12. Origin, dynamics and evolution of ocean garbage patches from observed surface drifters

    NASA Astrophysics Data System (ADS)

    van Sebille, Erik; England, Matthew H.; Froyland, Gary

    2012-12-01

    Much of the debris in the near-surface ocean collects in so-called garbage patches where, due to convergence of the surface flow, the debris is trapped for decades to millennia. Until now, studies modelling the pathways of surface marine debris have not included release from coasts or factored in the possibilities that release concentrations vary with region or that pathways may include seasonal cycles. Here, we use observational data from the Global Drifter Program in a particle-trajectory tracer approach that includes the seasonal cycle to study the fate of marine debris in the open ocean from coastal regions around the world on interannual to centennial timescales. We find that six major garbage patches emerge, one in each of the five subtropical basins and one previously unreported patch in the Barents Sea. The evolution of each of the six patches is markedly different. With the exception of the North Pacific, all patches are much more dispersive than expected from linear ocean circulation theory, suggesting that on centennial timescales the different basins are much better connected than previously thought and that inter-ocean exchanges play a large role in the spreading of marine debris. This study suggests that, over multi-millennial timescales, a significant amount of the debris released outside of the North Atlantic will eventually end up in the North Pacific patch, the main attractor of global marine debris.

  13. Objective Delineation of River Bed Surface Patches from High-Resolution Spatial Grain Size Data

    NASA Astrophysics Data System (ADS)

    Nelson, P. A.; Bellugi, D.; Dietrich, W. E.

    2010-12-01

    Gravel-bed rivers commonly display distinct sorting patterns on their beds. Visually, this heterogeneity often appears to form an organization of distinct textural patches or facies. The local bed surface grain size, and therefore bed surface patchiness, exerts considerable influence on local bed mobility, bedload transport rates, hydrodynamic roughness, and benthic microhabitats. Despite the ecological and morphodynamic importance of bed surface patchiness, we lack accurate and objective methods to delineate bed patches. However, recent advances in photographic measurement of bed surface grain size distributions are capable of providing data at a spatial resolution high enough to allow us an opportunity to answer the question: what is a patch? Here, we explore a variety of techniques that can be applied to high-resolution spatial grain size data to automatically generate maps of grain size patches. We apply a state-of-the-art image processing and machine learning procedure to a photographic survey of the bed surface of a near-field scale flume to extract grain size data and to generate a spatial grid of bed surface grain size distributions. The flume bed was composed of gravel 2-45 mm in diameter and it featured clearly identifiable sorting features. Using this dataset, we investigate several possible methods of patch delineation. The grid of grain size distributions can be represented by a graph of nodes (grain size distributions) connected by edges whose weight is a function of the similarity between two nodes. Spectral graph theory is then used to optimally cut the edges in order to produce a spatial structure of patches that minimizes the association between patches and maximizes the association of nodes within a patch. In a different approach, agglomerative clustering of spatially adjacent grain size distributions is used to produce a hierarchical dendrogram that can be thresholded to partition the bed into patches. We also explore using the k-means algorithm

  14. Detection and Reconstruction of an Implicit Boundary Surface by Adaptively Expanding A Small Surface Patch in a 3D Image.

    PubMed

    Wang, Lisheng; Wang, Pai; Cheng, Liuhang; Ma, Yu; Wu, Shenzhi; Wang, Yu-Ping; Xu, Zongben

    2014-11-01

    In this paper we propose a novel and easy to use 3D reconstruction method. With the method, users only need to specify a small boundary surface patch in a 2D section image, and then an entire continuous implicit boundary surface (CIBS) can be automatically reconstructed from a 3D image. In the method, a hierarchical tracing strategy is used to grow the known boundary surface patch gradually in the 3D image. An adaptive detection technique is applied to detect boundary surface patches from different local regions. The technique is based on both context dependence and adaptive contrast detection as in the human vision system. A recognition technique is used to distinguish true boundary surface patches from the false ones in different cubes. By integrating these different approaches, a high-resolution CIBS model can be automatically reconstructed by adaptively expanding the small boundary surface patch in the 3D image. The effectiveness of our method is demonstrated by its applications to a variety of real 3D images, where the CIBS with complex shapes/branches and with varying gray values/gradient magnitudes can be well reconstructed. Our method is easy to use, which provides a valuable tool for 3D image visualization and analysis as needed in many applications. PMID:26355329

  15. Hydrophobic surface patches on LolA of Pseudomonas aeruginosa are essential for lipoprotein binding.

    PubMed

    Remans, Kim; Pauwels, Kris; van Ulsen, Peter; Buts, Lieven; Cornelis, Pierre; Tommassen, Jan; Savvides, Savvas N; Decanniere, Klaas; Van Gelder, Patrick

    2010-09-01

    Many lipoproteins reside in the outer membrane (OM) of Gram-negative bacteria, and their biogenesis is dependent on the Lol (localization of lipoproteins) system. The periplasmic chaperone LolA accepts OM-destined lipoproteins that are released from the inner membrane by the LolCDE complex and transfers them to the OM receptor LolB. The exact nature of the LolA-lipoprotein complex is still unknown. The crystal structure of Escherichia coli LolA features an open beta-barrel covered by alpha helices that together constitute a hydrophobic cavity, which would allow the binding of one acyl chain. However, OM lipoproteins contain three acyl chains, and the stoichiometry of the LolA-lipoprotein complex is 1:1. Here we present the crystal structure of Pseudomonas aeruginosa LolA that projects clear hydrophobic surface patches. Since these patches are large enough to accommodate acyl chains, their role in lipoprotein binding was investigated. Several LolA mutant proteins were created, and their functionality was assessed by studying their capacity to release lipoproteins produced in sphaeroplasts. Interruption of the largest hydrophobic patch completely destroyed the lipoprotein-releasing capacity of LolA, while interruption of smaller patches apparently reduced efficiency. Thus, the results show a new lipoprotein transport model that places (some of) the acyl chains on the hydrophobic surface patches. PMID:20620146

  16. Nondestructive testing of surface-bonded piezoelectric patch actuators

    NASA Astrophysics Data System (ADS)

    Duerr, Johannes K.; Krohn, Nils; Nixdorf, Klaus; Luetze, Steffen; Herold-Schmidt, Ursula; Busse, Gerhard

    1999-07-01

    Introduction of new technologies to aerospace applications necessarily requires methods of non-destructive testing suitable to evaluate structural integrity. This important task also occurred when it was decided to develop and manufacture a large Fin-Box-Demonstrator equivalent to a fighter aircraft tail equipped with surface bonded piezoceramic actuators between DaimlerChrysler Aerospace - Military Aircraft Division and DaimlerChrysler Research and Technology. The objective of this project is to prove that structural vibrations of a fighter aircraft tail fin due to buffeting can be damped actively by means of surface bonded piezoceramic actuators.

  17. H2A.Z Acidic Patch Couples Chromatin Dynamics to Regulation of Gene Expression Programs during ESC Differentiation

    PubMed Central

    Subramanian, Vidya; Mazumder, Aprotim; Surface, Lauren E.; Butty, Vincent L.; Fields, Paul A.; Alwan, Allison; Torrey, Lillian; Thai, Kevin K.; Levine, Stuart S.; Bathe, Mark; Boyer, Laurie A.

    2013-01-01

    The histone H2A variant H2A.Z is essential for embryonic development and for proper control of developmental gene expression programs in embryonic stem cells (ESCs). Divergent regions of amino acid sequence of H2A.Z likely determine its functional specialization compared to core histone H2A. For example, H2A.Z contains three divergent residues in the essential C-terminal acidic patch that reside on the surface of the histone octamer as an uninterrupted acidic patch domain; however, we know little about how these residues contribute to chromatin structure and function. Here, we show that the divergent amino acids Gly92, Asp97, and Ser98 in the H2A.Z C-terminal acidic patch (H2A.ZAP3) are critical for lineage commitment during ESC differentiation. H2A.Z is enriched at most H3K4me3 promoters in ESCs including poised, bivalent promoters that harbor both activating and repressive marks, H3K4me3 and H3K27me3 respectively. We found that while H2A.ZAP3 interacted with its deposition complex and displayed a highly similar distribution pattern compared to wild-type H2A.Z, its enrichment levels were reduced at target promoters. Further analysis revealed that H2A.ZAP3 was less tightly associated with chromatin, suggesting that the mutant is more dynamic. Notably, bivalent genes in H2A.ZAP3 ESCs displayed significant changes in expression compared to active genes. Moreover, bivalent genes in H2A.ZAP3 ESCs gained H3.3, a variant associated with higher nucleosome turnover, compared to wild-type H2A.Z. We next performed single cell imaging to measure H2A.Z dynamics. We found that H2A.ZAP3 displayed higher mobility in chromatin compared to wild-type H2A.Z by fluorescent recovery after photobleaching (FRAP). Moreover, ESCs treated with the transcriptional inhibitor flavopiridol resulted in a decrease in the H2A.ZAP3 mobile fraction and an increase in its occupancy at target genes indicating that the mutant can be properly incorporated into chromatin. Collectively, our work suggests

  18. Formulation and optimization of mucoadhesive buccal patches of losartan potassium by using response surface methodology

    PubMed Central

    Ikram, Md.; Gilhotra, Neeraj; Gilhotra, Ritu Mehra

    2015-01-01

    Background: This study was undertaken with an aim to systematically design a model of factors that would yield an optimized sustained release dosage form of an anti-hypertensive agent, losartan potassium, using response surface methodology (RSM) by employing 32 full factorial design. Materials and Methods: Mucoadhesive buccal patches were prepared using different grades of hydroxypropyl methylcellulose (HPMC) (K4M and K100M) and polyvinylpyrrolidone-K30 by solvent casting method. The amount of the release retardant polymers – HPMC K4M (X1) and HPMC K100M (X2) was taken as an independent variable. The dependent variables were the burst release in 30 min (Y1), cumulative percentage release of drug after 8 h (Y2) and swelling index (Y3) of the patches. In vitro release and swelling studies were carried out and the data were fitted to kinetic equations. Results: The physicochemical, bioadhesive, and swelling properties of patches were found to vary significantly depending on the viscosity of the polymers and their combination. Patches showed an initial burst release preceding a more gradual sustained release phase following a nonfickian diffusion process. Discussion: The results indicate that suitable bioadhesive buccal patches with desired permeability could be prepared, facilitated with the RSM. PMID:26682205

  19. PL-PatchSurfer: A Novel Molecular Local Surface-Based Method for Exploring Protein-Ligand Interactions

    PubMed Central

    Hu, Bingjie; Zhu, Xiaolei; Monroe, Lyman; Bures, Mark G.; Kihara, Daisuke

    2014-01-01

    Structure-based computational methods have been widely used in exploring protein-ligand interactions, including predicting the binding ligands of a given protein based on their structural complementarity. Compared to other protein and ligand representations, the advantages of a surface representation include reduced sensitivity to subtle changes in the pocket and ligand conformation and fast search speed. Here we developed a novel method named PL-PatchSurfer (Protein-Ligand PatchSurfer). PL-PatchSurfer represents the protein binding pocket and the ligand molecular surface as a combination of segmented surface patches. Each patch is characterized by its geometrical shape and the electrostatic potential, which are represented using the 3D Zernike descriptor (3DZD). We first tested PL-PatchSurfer on binding ligand prediction and found it outperformed the pocket-similarity based ligand prediction program. We then optimized the search algorithm of PL-PatchSurfer using the PDBbind dataset. Finally, we explored the utility of applying PL-PatchSurfer to a larger and more diverse dataset and showed that PL-PatchSurfer was able to provide a high early enrichment for most of the targets. To the best of our knowledge, PL-PatchSurfer is the first surface patch-based method that treats ligand complementarity at protein binding sites. We believe that using a surface patch approach to better understand protein-ligand interactions has the potential to significantly enhance the design of new ligands for a wide array of drug-targets. PMID:25167137

  20. Combined patch containing salicylic acid and nicotinamide: role of drug interaction.

    PubMed

    Padula, Cristina; Ferretti, Chiara; Nicoli, Sara; Santi, Patrizia

    2010-12-01

    The aim of the present study was to formulate a combined patch containing salicylic (SA) acid and nicotinamide (NA), useful for the treatment of mild acne, and to verify their mutual effect on drug permeation and skin retention. The performance of the patch was tested in vitro in permeation experiments using pig ear skin as barrier. To better understand the data obtained from the film, permeation from solutions and isopropyl myristate/water partition coefficient were also determined. The results obtained in the present work suggest a mutual influence of NA and SA on their permeation across the skin from an innovative transdermal film. The partition coefficient obtained when the two molecules were simultaneously present was typically lower than the respective value obtained with NA and SA alone. PMID:20950260

  1. Bright patches on chernozems - from space to surface and soil properties

    NASA Astrophysics Data System (ADS)

    Smetanova, Anna; Burian, Libor; Holec, Juraj; Minár, Jozef

    2016-04-01

    located in areas with slope gradient between 3 and 6°, which is consider as the higher slope in this part of the hilly land. In 1949 the distribution of bright patches was more strongly related to higher slope gradient, the convex forms of profile curvature, and upslope position than in 2004. In the studied catchment, 34 soil profiles were described in the bright patches (identified in 2004), and 73% of them were situated on the convex forms of profile curvature. The most of the profiles were eroded (88%), the mean soil loss was 0.36 m (in the comparison with the reference soil profile), and in 55% of described soil profiles the entire mollic horizon was removed. The typical surface horizon contained 2.3% of humus and 21% of carbonates. The soil profiles were further compared with these situated in the areas neighbouring with the bright patches, and soil profiles on two valley cross-sections, in order to understand the soil redistribution in the catchment, and describe the differences between the bright and black patches in the chernozem landscape. This work was supported by the Slovak Research and Development Agency under the contract ESF-EC-0006-07 and APVV-0625-11; Anna Smetanová has received the support of the AgreenSkills fellowship (under grant agreement n°267196).

  2. A user's manual for Electromagnetic Surface Patch (ESP) code. Version 2: Polygonal plates and wires

    NASA Astrophysics Data System (ADS)

    Newman, E. H.; Alexandropoulos, P.

    1983-09-01

    This report serves as a user's manual for the Electromagnetic Surface Patch (ESP) Code. This code is a method of moments solution for interconnections of thin wires and polygonal plates. The code can compute currents, input impedance, efficiency, mutual coupling, and far-zone radiation and scattering patterns. In addition to describing the code input and output, the use of the code is illustrated by simple examples. Subroutine descriptions are also given.

  3. Emission FTIR analyses of thin microscopic patches of jet fuel residue deposited on heated metal surface

    NASA Technical Reports Server (NTRS)

    Lauer, J. L.; Vogel, P.

    1984-01-01

    Deposits laid down in patches on metal strips in a high pressure/high temperature fuel system simulator operated with aerated fuel at varying flow rates were analyzed by emission FTIR in terms of functional groups. Significant differences were found in the spectra and amounts of deposits derived from fuels to which small concentrations of oxygen-, nitrogen-, or sulfur-containing heterocyclics or metal naphthenates were added. The spectra of deposits generated on strips by heating fuels and air in a closed container were very different from those of the flowing fluid deposits. One such closed-container dodecane deposit on silver gave a strong surface-enhanced Raman spectrum.

  4. A Survey of Patch Methods

    NASA Technical Reports Server (NTRS)

    Barnhill, R. E.

    1985-01-01

    Patch methods are someshow a response to the fact that surface geometry is local, that is, only small parts of a surface are created at a time. The two categories of patches, transfinite patches and finite dimensional patches are examined and a discussion of trivariate patches is presented.

  5. Unifying the controlling mechanisms for the critical heat flux and quenching: The ability of liquid to contact the hot surface. Part 3, The influence of dry-patch shape and multiple-patch interaction

    SciTech Connect

    Unal, C.; Sadasivan, P.; Nelson, R.A.

    1993-07-01

    In earlier work, we proposed a hypothesis for the occurrence of critical heat flux (CHF) during pool boiling of saturated liquids. According to this gypothesis, CHF occurs when some portion of the heater surface drives and a local point with this dry patch reaches a critical rewetting temperature, beyond which liquid an no longer contact that point. In this paper, the effects of dry-patch shape and multiple-patch interactions on the critical rewetting temperature have been investigated.

  6. A Comparison Between Jerusalem Cross and Square Patch Frequency Selective Surfaces for Low Profile Antenna Applications

    NASA Technical Reports Server (NTRS)

    Cure, David; Weller, Thomas; Miranda, Felix A.

    2011-01-01

    In this paper, a comparison between Jerusalem Cross (JC) and Square Patch (SP) based Frequency Selected Surfaces (FSS) for low profile antenna applications is presented. The comparison is aimed at understanding the performance of low profile antennas backed by high impedance surfaces. In particular, an end loaded planar open sleeve dipole (ELPOSD) antenna is examined due to the various parameters within its configuration, offering significant design flexibility and a wide operating bandwidth. Measured data of the antennas demonstrate that increasing the number of unit cells improves the fractional bandwidth. The antenna bandwidth increased from 0.8% to 1.8% and from 0.8% to 2.7% for the JC and SP structures, respectively. The number of unit cells was increased from 48 to 80 for the JC-FSS and from 24 to 48 for the SP-FSS.

  7. Scopolamine Transdermal Patch

    MedlinePlus

    ... patch from its protective pouch. To expose the adhesive surface of the patch, the clear plastic protective ... peeled off and discarded. Contact with the exposed adhesive layer should be avoided to prevent contamination of ...

  8. A conserved acidic patch in the Myb domain is required for activation of an endogenous target gene and for chromatin binding

    PubMed Central

    Ko, Emily Ray; Ko, Dennis; Chen, Carolyn; Lipsick, Joseph S

    2008-01-01

    The c-Myb protein is a transcriptional regulator initially identified by homology to the v-Myb oncoprotein, and has since been implicated in human cancer. The most highly conserved portion of the c-Myb protein is the DNA-binding domain which consists of three imperfect repeats. Many other proteins contain one or more Myb-related domains, including a number of proteins that do not bind directly to DNA. We performed a phylogenetic analysis of diverse classes of Myb-related domains and discovered a highly conserved patch of acidic residues common to all Myb-related domains. These acidic residues are positioned in the first of three alpha-helices within each of the three repeats that comprise the c-Myb DNA-binding domain. Interestingly, these conserved acidic residues are present on a surface of the protein which is distinct from that which binds to DNA. Alanine mutagenesis revealed that the acidic patch of the third c-Myb repeat is essential for transcriptional activity, but neither for nuclear localization nor DNA-binding. Instead, these acidic residues are required for efficient chromatin binding and interaction with the histone H4 N-terminal tail. PMID:18840288

  9. A user's manual for the Electromagnetic Surface Patch code: ESP version 3

    NASA Technical Reports Server (NTRS)

    Newman, E. H.; Dilsavor, R. L.

    1987-01-01

    This report serves as a user's manual for Version III of the Electromagnetic Surface Patch Code or ESP code. ESP is user-oriented, based on the method of moments (MM) for treating geometries consisting of an interconnection of thin wires and perfectly conducting polygonal plates. Wire/plate junctions must be about 0.1 lambda or more from any plate edge. Several plates may intersect along a common edge. Excitation may be by either a delta-gap voltage generator or by a plane wave. The thin wires may have finite conductivity and also may contain lumped loads. The code computes most of the usual quantities of interest such as current distribution, input impedance, radiation efficiency, mutual coupling, far zone gain patterns (both polarizations) and radar-cross-section (both/cross polarizations).

  10. A user's manual for the Electromagnetic Surface Patch code: ESP version 3

    NASA Astrophysics Data System (ADS)

    Newman, E. H.; Dilsavor, R. L.

    1987-05-01

    This report serves as a user's manual for Version III of the Electromagnetic Surface Patch Code or ESP code. ESP is user-oriented, based on the method of moments (MM) for treating geometries consisting of an interconnection of thin wires and perfectly conducting polygonal plates. Wire/plate junctions must be about 0.1 lambda or more from any plate edge. Several plates may intersect along a common edge. Excitation may be by either a delta-gap voltage generator or by a plane wave. The thin wires may have finite conductivity and also may contain lumped loads. The code computes most of the usual quantities of interest such as current distribution, input impedance, radiation efficiency, mutual coupling, far zone gain patterns (both polarizations) and radar-cross-section (both/cross polarizations).

  11. Surface-enhanced Raman scattering from finite arrays of gold nano-patches

    SciTech Connect

    Vincenti, M. A.; Ceglia, D. de; Grande, M.; Petruzzelli, V.; D'Orazio, A.; Bianco, G. V.; Bruno, G.; Stomeo, T.; De Vittorio, M.; Scalora, M.

    2013-01-07

    We experimentally investigate the surface-enhanced Raman scattering (SERS) response of a 2D-periodic array of square gold nano-patches, functionalized by means of a conjugated, rigid thiol. We measure a Raman signal enhancement up to 200 times more intense compared to other plasmon-based nanostructures functionalized with the same molecule, and show that the enhancement is not strictly correlated to the presence of plasmonic resonances. The agreement between experimental and theoretical results reveals the importance of a full-wave analysis based on the inclusion of the actual scattering cross section of the molecule. The proposed numerical approach may serve not only as a tool to predict the enhancement of Raman signal scattered from strongly resonant nanostructure but also as an effective instrument to engineer SERS platforms that target specific molecules.

  12. Novel superhydrophilic poly(l-lactic acid-co-ε-caprolactone)/fibrinogen electrospun patch for rat abdominal wall reconstruction.

    PubMed

    Liu, Zhang; Li, Shaojie; Su, Ling; Sun, Kang; Wu, Xujun; Wu, Feng; Huang, Weihong; Yang, Li; Tang, Jianxiong; He, Hongbing

    2015-08-01

    A novel superhydrophilic hybrid scaffold was created by electrospinning a mixture of poly(l-lactic acid-co-ε-caprolactone) and formulated fibrinogen. The hybrid scaffolds possess the combined benefits of each individual component, such as moderate mechanical strength and excellent biocompatibility. In vitro studies also revealed that endothelial cells seeded on the hybrid scaffolds achieved a relatively high level of cell attachment after three days of culture and a significant increase in the proliferation rate after seven days of culture, compared with pure fibrinogen or poly(l-lactic acid-co-ε-caprolactone) scaffolds. A comparative study of hybrid and pure poly(l-lactic acid-co-ε-caprolactone) patches was performed in an abdominal wall defect model in rats. In both groups, implants degraded by six months, but muscle reconstruction was only observed in the hybrid patch group. PMID:25791683

  13. Spectrofluorimetric determination of tranexamic acid in hydrogel patch formulations by derivatization with naphthalene-2,3-dicarboxaldehyde/cyanide.

    PubMed

    Duangrat, Chadarat; Wongsri, Kiattikun; Pongpaibul, Yanee

    2007-01-01

    The aim of this research was to develop and validate a spectrofluorimetric method for determination of tranexamic acid in hydrogel patch formulations. Tranexamic acid (trans-4-aminomethylcyclohexanecarboxylic acid, trans-AMCHA) is an antifibrinolytic drug that recently gained attention as a skin-whitening agent due to its inhibitory effect on ultraviolet (UV)-induced pigmentation in vivo. Derivatization with naphthalene-2,3-dicarboxaldehyde (NDA) in the presence of cyanide ion (CN(-)) to produce a fluorescent 1-cyanobenz[f]isoindole (CBI) product (lambda(ex) = 420 nm, lambda(em) = 480 nm) is for the first time reported for the determination of tranexamic acid in hydrogel patch formulations. Other separation techniques were not used in the analysis of the CBI-fluorescent product as required in the previous studies. The developed method was proven to be precise and accurate with percent recoveries ranging between 98.0% and 101.8% at the concentration range of 8.4-84.0 microg/ml (R(2) > 0.999). The intra- and inter-day precisions as expressed by the relative standard deviations (RSD) were below 1.85%. Derivatization of tranexamic acid with NDA/CN(-) was completed within five minutes and was stable for at least 30 minutes. The method has been applied to the analysis of drug content and release profiles in tranexamic hydrogel patch formulations. PMID:17598024

  14. Determination of surface dose rate of indigenous (32)P patch brachytherapy source by experimental and Monte Carlo methods.

    PubMed

    Kumar, Sudhir; Srinivasan, P; Sharma, S D; Saxena, Sanjay Kumar; Bakshi, A K; Dash, Ashutosh; Babu, D A R; Sharma, D N

    2015-09-01

    Isotope production and Application Division of Bhabha Atomic Research Center developed (32)P patch sources for treatment of superficial tumors. Surface dose rate of a newly developed (32)P patch source of nominal diameter 25 mm was measured experimentally using standard extrapolation ionization chamber and Gafchromic EBT film. Monte Carlo model of the (32)P patch source along with the extrapolation chamber was also developed to estimate the surface dose rates from these sources. The surface dose rates to tissue (cGy/min) measured using extrapolation chamber and radiochromic films are 82.03±4.18 (k=2) and 79.13±2.53 (k=2) respectively. The two values of the surface dose rates measured using the two independent experimental methods are in good agreement to each other within a variation of 3.5%. The surface dose rate to tissue (cGy/min) estimated using the MCNP Monte Carlo code works out to be 77.78±1.16 (k=2). The maximum deviation between the surface dose rates to tissue obtained by Monte Carlo and the extrapolation chamber method is 5.2% whereas the difference between the surface dose rates obtained by radiochromic film measurement and the Monte Carlo simulation is 1.7%. The three values of the surface dose rates of the (32)P patch source obtained by three independent methods are in good agreement to one another within the uncertainties associated with their measurements and calculation. This work has demonstrated that MCNP based electron transport simulations are accurate enough for determining the dosimetry parameters of the indigenously developed (32)P patch sources for contact brachytherapy applications. PMID:26086681

  15. Overland flow from plant patches: Coupled effects of preferential infiltration, surface roughness and depression storage at the semiarid Patagonian Monte

    NASA Astrophysics Data System (ADS)

    Rossi, María J.; Ares, Jorge O.

    2016-02-01

    The objective of this study is to characterize and quantify the overland flow generated from the plant patch areas of spotted vegetation toward the immediate surrounding bare ground including the coupled effects of preferential infiltration, surface roughness and depression storage. To this aim a series of overland flow plot experiments were designed in areas of the Patagonian Monte where evidence of patch-to-soil overland flow was observed. The experiments produced data on the plot micro-topography and physical properties of the soil, root density and the frictional parameters of the overland flow as well as the extent of the areas of water depression storage. The obtained data were used to calibrate a spatial-explicit (CREST) hydrological model of the flows and pathways generated by stemflow and throughfall during characteristic storms in the area. Good agreement between the model estimates and the measured data was found. This work provides physically-based metrics of runoff redistribution from the plant patch areas toward the immediate surrounding bare soil areas, including the effect of plant roots and depression storage as influenced by various shapes of the plant patch slopes. It is concluded that water transport can result from stemflow and throughfall at the patch areas during typical rainfall events at the semiarid Patagonian Monte. Implications of this phenomenon in the surface distribution of water, nutrients and seeds may feasibly follow.

  16. Delineation of river bed-surface patches by clustering high-resolution spatial grain size data

    NASA Astrophysics Data System (ADS)

    Nelson, Peter A.; Bellugi, Dino; Dietrich, William E.

    2014-01-01

    The beds of gravel-bed rivers commonly display distinct sorting patterns, which at length scales of ~ 0.1 - 1 channel widths appear to form an organization of patches or facies. This paper explores alternatives to traditional visual facies mapping by investigating methods of patch delineation in which clustering analysis is applied to a high-resolution grid of spatial grain-size distributions (GSDs) collected during a flume experiment. Specifically, we examine four clustering techniques: 1) partitional clustering of grain-size distributions with the k-means algorithm (assigning each GSD to a type of patch based solely on its distribution characteristics), 2) spatially-constrained agglomerative clustering ("growing" patches by merging adjacent GSDs, thus generating a hierarchical structure of patchiness), 3) spectral clustering using Normalized Cuts (using the spatial distance between GSDs and the distribution characteristics to generate a matrix describing the similarity between all GSDs, and using the eigenvalues of this matrix to divide the bed into patches), and 4) fuzzy clustering with the fuzzy c-means algorithm (assigning each GSD a membership probability to every patch type). For each clustering method, we calculate metrics describing how well-separated cluster-average GSDs are and how patches are arranged in space. We use these metrics to compute optimal clustering parameters, to compare the clustering methods against each other, and to compare clustering results with patches mapped visually during the flume experiment.All clustering methods produced better-separated patch GSDs than the visually-delineated patches. Although they do not produce crisp cluster assignment, fuzzy algorithms provide useful information that can characterize the uncertainty of a location on the bed belonging to any particular type of patch, and they can be used to characterize zones of transition from one patch to another. The extent to which spatial information influences

  17. Wind-Tunnel Study of Scalar Transfer Phenomena for Surfaces of Block Arrays and Smooth Walls with Dry Patches

    NASA Astrophysics Data System (ADS)

    Chung, Juyeon; Hagishima, Aya; Ikegaya, Naoki; Tanimoto, Jun

    2015-11-01

    We report the result of a wind-tunnel experiment to measure the scalar transfer efficiency of three types of surfaces, wet street surfaces of cube arrays, wet smooth surfaces with dry patches, and fully wet smooth surfaces, to examine the effects of roughness topography and scalar source allocation. Scalar transfer coefficients defined by the source area {C}_{E wet} for an underlying wet street surface of dry block arrays show a convex trend against the block density λ _p. Comparison with past data, and results for wet smooth surfaces including dry patches, reveal that the positive peak of {C}_{E wet} with increasing λ _p is caused by reduced horizontal advection due to block roughness and enhanced evaporation due to a heterogeneous scalar source distribution. In contrast, scalar transfer coefficients defined by a lot-area including wet and dry areas {C}_{E lot} for smooth surfaces with dry patches indicate enhanced evaporation compared to the fully wet smooth surface (the oasis effect) for all three conditions of dry plan-area ratio up to 31 %. Relationships between the local Sherwood and Reynolds numbers derived from experimental data suggest that attenuation of {C}_{E wet} for a wet street of cube arrays against streamwise distance is weaker than for a wet smooth surface because of canopy flow around the blocks. Relevant parameters of ratio of roughness length for momentum to scalar {B}^{-1} were calculated from observational data. The result implies that {B}^{-1} possibly increases with block roughness, and decreases with the partitioning of the scalar boundary layer because of dry patches.

  18. Methyl esterification of 15-hydroperoxyabietic acid does not affect the patch-test result in colophonium allergic patients.

    PubMed

    Karlberg, Ann-Therese; Bråred-Christensson, Johanna; Börje, Anna; Harambasic, Elma; Matura, Mihàly

    2007-06-01

    Colophonium (gum rosin) consists of numerous compounds. We have previously shown that abietic acid (Fig. 1), the major compound in gum rosin, is oxidized to strong contact allergens at air exposure (1). The most potent allergen identified is 15-hydroperoxyabietic acid (15-HPA, Fig. 1), which was isolated as its methyl ester (Fig. 1) and used for patch testing (2, 3). The aim of this study was to confirm the previous postulate that methyl esterification of the carboxyl group in 15-HPA does not affect the allergenic activity. PMID:17577378

  19. A polyphenylene dendrimer drug transporter with precisely positioned amphiphilic surface patches.

    PubMed

    Stangenberg, René; Wu, Yuzhou; Hedrich, Jana; Kurzbach, Dennis; Wehner, Daniel; Weidinger, Gilbert; Kuan, Seah Ling; Jansen, Malin Insa; Jelezko, Fedor; Luhmann, Heiko J; Hinderberger, Dariush; Weil, Tanja; Müllen, Klaus

    2015-02-18

    The design and synthesis of a polyphenylene dendrimer (PPD 3) with discrete binding sites for lipophilic guest molecules and characteristic surface patterns is presented. Its semi-rigidity in combination with a precise positioning of hydrophilic and hydrophobic groups at the periphery yields a refined architecture with lipophilic binding pockets that accommodate defined numbers of biologically relevant guest molecules such as fatty acids or the drug doxorubicin. The size, architecture, and surface textures allow to even penetrate brain endothelial cells that are a major component of the extremely tight blood-brain barrier. In addition, low to no toxicity is observed in in vivo studies using zebrafish embryos. The unique PPD scaffold allows the precise placement of functional groups in a given environment and offers a universal platform for designing drug transporters that closely mimic many features of proteins. PMID:25182694

  20. Salmon Patch

    MedlinePlus

    ... the head. Salmon patches are different from port-wine stains (discussed as a separate topic) in that ... difference between a salmon patch and a port-wine stain. In the past, port-wine stains and ...

  1. Epicardial application of cardiac progenitor cells in a 3D-printed gelatin/hyaluronic acid patch preserves cardiac function after myocardial infarction.

    PubMed

    Gaetani, Roberto; Feyen, Dries A M; Verhage, Vera; Slaats, Rolf; Messina, Elisa; Christman, Karen L; Giacomello, Alessandro; Doevendans, Pieter A F M; Sluijter, Joost P G

    2015-08-01

    Cardiac cell therapy suffers from limitations related to poor engraftment and significant cell death after transplantation. In this regard, ex vivo tissue engineering is a tool that has been demonstrated to increase cell retention and survival. The aim of our study was to evaluate the therapeutic potential of a 3D-printed patch composed of human cardiac-derived progenitor cells (hCMPCs) in a hyaluronic acid/gelatin (HA/gel) based matrix. hCMPCs were printed in the HA/gel matrix (30 × 10(6) cells/ml) to form a biocomplex made of six perpendicularly printed layers with a surface of 2 × 2 cm and thickness of 400 μm, in which they retained their viability, proliferation and differentiation capability. The printed biocomplex was transplanted in a mouse model of myocardial infarction (MI). The application of the patch led to a significant reduction in adverse remodeling and preservation of cardiac performance as was shown by both MRI and histology. Furthermore, the matrix supported the long-term in vivo survival and engraftment of hCMPCs, which exhibited a temporal increase in cardiac and vascular differentiation markers over the course of the 4 week follow-up period. Overall, we developed an effective and translational approach to enhance hCMPC delivery and action in the heart. PMID:26043062

  2. Surface Acidity by Positronium Spectroscopy

    NASA Astrophysics Data System (ADS)

    Huang, Weifeng; Huang, Dinah C.

    2001-03-01

    The application of the technique of angular correlation of the annihilation radiation (ACAR) from positron-electron pairs for investigating Bronsted acid sites in zeolytic catalysts was initially introduced by the authors with remarkable success. As incident positrons enter polycrystalline zeolites, a portion of the incident positrons would diffuse through the bulk and emerge on the internal surfaces and form with electrons there hydrogen-like positronium atoms (Ps). The Ps atoms will eventually annihilate also and generate an ACAR spectrum that is distinctively narrower than the one from the bulk. In the presence of Bronsted acid sites, the Ps atom population would be reduced through oxidation by protons, resulting in alteration of the ACAR spectrum which is gauged by using a lineshape parameter S. In this report, results from ACAR measurements for based-adsorbed NaHY zeolites will be presented and discussed in light of acidic stregth and effect of molecular size. Acknowledgement: This project was partially supported by grants from NSF and Taiwan National Science Council.

  3. Emission FTIR analyses of thin microscopic patches of jet fuel residues deposited on heated metal surfaces

    NASA Technical Reports Server (NTRS)

    Lauer, J. L.; Vogel, P.

    1986-01-01

    The relationship of fuel stability to fuel composition and the development of mechanisms for deposit formation were investigated. Fuel deposits reduce heat transfer efficiency and increase resistance to fuel flow and are highly detrimental to aircraft performance. Infrared emission Fourier transform spectroscopy was chosen as the primary method of analysis because it was sensitive enough to be used in-situ on tiny patches of monolayers or of only a few molecular layers of deposits which generally proved completely insoluble in any nondestructive solvents. Deposits of four base fuels were compared; dodecane, a dodecane/tetralin blend, commercial Jet A fuel, and a broadened-properties jet fuel particularly rich in polynuclear aromatics. Every fuel in turn was provided with and without small additions of such additives as thiophene, furan, pyrrole, and copper and iron naphthenates.

  4. Fatty acid methyl ester profiles of bat wing surface lipids.

    PubMed

    Pannkuk, Evan L; Fuller, Nathan W; Moore, Patrick R; Gilmore, David F; Savary, Brett J; Risch, Thomas S

    2014-11-01

    Sebocytes are specialized epithelial cells that rupture to secrete sebaceous lipids (sebum) across the mammalian integument. Sebum protects the integument from UV radiation, and maintains host microbial communities among other functions. Native glandular sebum is composed primarily of triacylglycerides (TAG) and wax esters (WE). Upon secretion (mature sebum), these lipids combine with minor cellular membrane components comprising total surface lipids. TAG and WE are further cleaved to smaller molecules through oxidation or host enzymatic digestion, resulting in a complex mixture of glycerolipids (e.g., TAG), sterols, unesterified fatty acids (FFA), WE, cholesteryl esters, and squalene comprising surface lipid. We are interested if fatty acid methyl ester (FAME) profiling of bat surface lipid could predict species specificity to the cutaneous fungal disease, white nose syndrome (WNS). We collected sebaceous secretions from 13 bat spp. using Sebutape(®) and converted them to FAME with an acid catalyzed transesterification. We found that Sebutape(®) adhesive patches removed ~6× more total lipid than Sebutape(®) indicator strips. Juvenile eastern red bats (Lasiurus borealis) had significantly higher 18:1 than adults, but 14:0, 16:1, and 20:0 were higher in adults. FAME profiles among several bat species were similar. We concluded that bat surface lipid FAME profiling does not provide a robust model predicting species susceptibility to WNS. However, these results provide baseline data that can be used for lipid roles in future ecological studies, such as life history, diet, or migration. PMID:25227993

  5. Effect of photonic crystal and frequency selective surface implementation on gain enhancement in the microstrip patch antenna at terahertz frequency

    NASA Astrophysics Data System (ADS)

    Nejati, Ameneh; Sadeghzadeh, Ramezan Ali; Geran, Fatemeh

    2014-09-01

    In this paper, microstrip patch antenna with frequency selective surface (FSS) and photonic band gap (PBG) structures in the frequency range of 0.5-0.7 THz is presented for wireless communications. Proposed patch antenna is designed on a substrate with uniform and non-uniform PBG structures. Here, the effects of substrate thickness, various radii and arrangement of holes on antenna resonance in both PBG forms are studied. Near zero characteristic on uniform and non-uniform PBG substrate is compared and the results show that along with increase in hole radius, antenna operating frequency and bandwidth are increased. Also, the FSS structure is designed as a perfect absorber. Finally, by using FSS and PBG structures simultaneously, gain enhancement, increase in directivity and pattern shaping are studied at THz field. The antenna gain in final structure is increased by 2 dBi (32%) in comparison to simple form and Half-Power beam width is reduced from 100°×80° in simple form to 72°×48° by using FSS and PBG. All simulations and designs are done by Ansoft HFSS and CST Microwave Studio simulation tools with different full wave methods.

  6. A conserved patch of hydrophobic amino acids modulates Myb activity by mediating protein-protein interactions.

    PubMed

    Dukare, Sandeep; Klempnauer, Karl-Heinz

    2016-07-01

    The transcription factor c-Myb plays a key role in the control of proliferation and differentiation in hematopoietic progenitor cells and has been implicated in the development of leukemia and certain non-hematopoietic tumors. c-Myb activity is highly dependent on the interaction with the coactivator p300 which is mediated by the transactivation domain of c-Myb and the KIX domain of p300. We have previously observed that conservative valine-to-isoleucine amino acid substitutions in a conserved stretch of hydrophobic amino acids have a profound effect on Myb activity. Here, we have explored the function of the hydrophobic region as a mediator of protein-protein interactions. We show that the hydrophobic region facilitates Myb self-interaction and binding of the histone acetyl transferase Tip60, a previously identified Myb interacting protein. We show that these interactions are affected by the valine-to-isoleucine amino acid substitutions and suppress Myb activity by interfering with the interaction of Myb and the KIX domain of p300. Taken together, our work identifies the hydrophobic region in the Myb transactivation domain as a binding site for homo- and heteromeric protein interactions and leads to a picture of the c-Myb transactivation domain as a composite protein binding region that facilitates interdependent protein-protein interactions of Myb with regulatory proteins. PMID:27080133

  7. Patch tests*

    PubMed Central

    Lazzarini, Rosana; Duarte, Ida; Ferreira, Alessandra Lindmayer

    2013-01-01

    Patch tests were introduced as a diagnostic tool in the late nineteenth century. Since then, they have improved considerably becoming what they are today. Patch tests are used in the diagnostic investigation of contact dermatitis worldwide. Batteries or series previously studied and standardized should be used in patch testing. The methodology is simple, but it requires adequate training for the results to be correctly interpreted and used. Despite having been used for over a century, it needs improvement like all other diagnostic techniques in the medical field. PMID:24474094

  8. Hyaluronic acid fat graft myringoplasty vs fat patch fat graft myringoplasty.

    PubMed

    Alzahrani, Musaed; Saliba, Issam

    2015-08-01

    We aim to compare the hyaluronic acid to fat graft myringoplasty (HAFGM) technique to a recently described modified-FGM (M-FGM) in the repair of tympanic membrane perforation (TMP). We also aim to evaluate the hearing level improvement postoperatively. We conducted a prospective study in an adult tertiary care center between 2012 and 2013. Adult patients presenting with simple TMP were operated on randomly using either HAFGM or M-FGM under local anesthesia in outpatients' settings. Success was considered when complete closure is achieved. Audiometric parameters were evaluated pre and postoperatively. Twenty-four patients were included in the study (HAFGM: 10 patients and M-FGM: 14 patients). Complete closure was achieved in 80 % in HAFGM vs 42.8 % in the M-FGM (p = 0.03). The study was abandoned due to the low success rate in first 14 patients of the M-FGM group. The pure tone audiometry was improved postoperatively in the HAFGM only. The study was aborted because of the unsatisfactory obtained results using the MFGM. It also shows the beneficial effect of hyaluronic acid application to FGM for a successful TMP repair. PMID:24633245

  9. Lactic Acid Bacteria Improves Peyer's Patch Cell-Mediated Immunoglobulin A and Tight-Junction Expression in a Destructed Gut Microbial Environment.

    PubMed

    Kim, Sung Hwan; Jeung, Woonhee; Choi, Il-Dong; Jeong, Ji-Woong; Lee, Dong Eun; Huh, Chul-Sung; Kim, Geun-Bae; Hong, Seong Soo; Shim, Jae-Jung; Lee, Jung Lyoul; Sim, Jae-Hun; Ahn, Young-Tae

    2016-06-28

    To evaluate the effects of lactic acid bacteria (LAB) on Peyer's patch cells, mice were treated with a high dose of kanamycin to disturb the gut microbial environment. The overarching goal was to explore the potential of LAB for use as a dietary probiotic that buffers the negative consequences of antibiotic treatment. In vitro, LAB stimulated the production of immunoglobulin A (IgA) from isolated Peyer's patch cells. Inflammation-related genes (TNF-α, IL-1β, and IL-8) were up-regulated in Caco-2 cells stimulated with lipopolysaccharide (LPS), while tight-junction-related genes (ZO-1 and occludin) were down-regulated; the effects of LPS on inflammatory gene and tight-junction gene expression were reversed by treatment with LAB. Mice treated with a high dose of kanamycin showed increased serum IgE levels and decreases in serum IgA and fecal IgA levels; the number of Peyer's patch cells decreased with kanamycin treatment. However, subsequent LAB treatment was effective in reducing the serum IgE level and recovering the serum IgA and fecal IgA levels, as well as the number of Peyer's patch cells. In addition, ZO-1 and occludin mRNA levels were up-regulated in the ileum tissues of mice receiving LAB treatment. Lactic acid bacteria can enhance the intestinal immune system by improving the integrity of the intestinal barrier and increasing the production of IgA in Peyer's patches. Lactic acid bacteria should be considered a potential probiotic candidate for improving intestinal immunity, particularly in mitigating the negative consequences of antibiotic use. PMID:26975767

  10. Cabbage Patch

    NASA Technical Reports Server (NTRS)

    1997-01-01

    This Sojourner rover image of the Cabbage Patch shows small rounded objects on the surface that are about 3-4 cm across. Some of these are within excavations, which are about 0.5 cm wide. Several questions arise about the pebbles: Why are they rounded? Where did they come from? What do they mean?

    Geologists use MULTIPLE WORKING HYPOTHESES when attempting to explain observations. Some hypotheses that could account for the pebbles are: They were rounded during transport by waters of catastrophic floods and deposited on the Ares Vallis floodplain They were rounded by wave action on an ancient Martian beach They were rounded during glacial transport They are glasses that were produced by melting during impact cratering. The glass was first ejected from the crater, then molded into spherical shapes or drops as it traveled through the atmosphere, and finally was deposited at the sites They are spatter from lava flows They are nodules brought up from the deep Martian interior by lava flows or pyroclastic eruptions. They are concretions formed in sedimentary rocks They came from ancient conglomerate rocks. The pebbles were rounded by water action and subsequently lithified into conglomerate rocks. Later, the waters of catastrophic floods transported the conglomerates and deposited them on the Ares floodplain. The pebbles were then freed from the rocks by weathering. A combination of the above

    Mars Pathfinder is the second in NASA's Discovery program of low-cost spacecraft with highly focused science goals. The Jet Propulsion Laboratory, Pasadena, CA, developed and manages the Mars Pathfinder mission for NASA's Office of Space Science, Washington, D.C. JPL is a division of the California Institute of Technology (Caltech).

  11. Local Geometry and Evolutionary Conservation of Protein Surfaces Reveal the Multiple Recognition Patches in Protein-Protein Interactions

    PubMed Central

    Laine, Elodie; Carbone, Alessandra

    2015-01-01

    Protein-protein interactions (PPIs) are essential to all biological processes and they represent increasingly important therapeutic targets. Here, we present a new method for accurately predicting protein-protein interfaces, understanding their properties, origins and binding to multiple partners. Contrary to machine learning approaches, our method combines in a rational and very straightforward way three sequence- and structure-based descriptors of protein residues: evolutionary conservation, physico-chemical properties and local geometry. The implemented strategy yields very precise predictions for a wide range of protein-protein interfaces and discriminates them from small-molecule binding sites. Beyond its predictive power, the approach permits to dissect interaction surfaces and unravel their complexity. We show how the analysis of the predicted patches can foster new strategies for PPIs modulation and interaction surface redesign. The approach is implemented in JET2, an automated tool based on the Joint Evolutionary Trees (JET) method for sequence-based protein interface prediction. JET2 is freely available at www.lcqb.upmc.fr/JET2. PMID:26690684

  12. Spatial Control of Condensation and Freezing on Superhydrophobic Surfaces with Hydrophilic Patches

    SciTech Connect

    Mishchenko, Lidiya; Khan, M.; Aizenberg, Joanna; Hatton, Benjamin

    2013-09-25

    Certain natural organisms use micro-patterned surface chemistry, or ice-nucleating species, to control water condensation and ice nucleation for survival under extreme conditions. As an analogy to these biological approaches, it is shown that functionalized, hydrophilic polymers and particles deposited on the tips of superhydrophobic posts induce precise topographical control over water condensation and freezing at the micrometer scale. A bottom-up deposition process is used to take advantage of the limited contact area of a non-wetting aqueous solution on a superhydrophobic surface. Hydrophilic polymer deposition on the tips of these geometrical structures allows spatial control over the nucleation, growth, and coalescence of micrometer-scale water droplets. The hydrophilic tips nucleate water droplets with extremely uniform nucleation and growth rates, uniform sizes, an increased stability against coalescence, and asymmetric droplet morphologies. Furthermore, control of freezing behavior is also demonstrated via deposition of ice-nucleating AgI nanoparticles on the tips of these structures. The combination of the hydrophilic polymer and AgI particles on the tips was used to achieve templating of ice nucleation at the micrometer scale. Preliminary results indicate that control over ice crystal size, spatial symmetry, and position might be possible with this method. This type of approach can serve as a platform for systematically analyzing micrometer-scale condensation and freezing phenomena, and as a model for natural systems.

  13. Spatial Control of Condensation and Freezing on Superhydrophobic Surfaces with Hydrophilic Patches

    SciTech Connect

    Mishchenko, L; Khan, M; Aizenberg, J; Hatton, BD

    2013-07-03

    Certain natural organisms use micro-patterned surface chemistry, or ice-nucleating species, to control water condensation and ice nucleation for survival under extreme conditions. As an analogy to these biological approaches, it is shown that functionalized, hydrophilic polymers and particles deposited on the tips of superhydrophobic posts induce precise topographical control over water condensation and freezing at the micrometer scale. A bottom-up deposition process is used to take advantage of the limited contact area of a non-wetting aqueous solution on a superhydrophobic surface. Hydrophilic polymer deposition on the tips of these geometrical structures allows spatial control over the nucleation, growth, and coalescence of micrometer-scale water droplets. The hydrophilic tips nucleate water droplets with extremely uniform nucleation and growth rates, uniform sizes, an increased stability against coalescence, and asymmetric droplet morphologies. Control of freezing behavior is also demonstrated via deposition of ice-nucleating AgI nanoparticles on the tips of these structures. This combination of the hydrophilic polymer and AgI particles on the tips was used to achieve templating of ice nucleation at the micrometer scale. Preliminary results indicate that control over ice crystal size, spatial symmetry, and position might be possible with this method. This type of approach can serve as a platform for systematically analyzing micrometer-scale condensation and freezing phenomena, and as a model for natural systems.

  14. Detection and Discrimination of the Thick Oil Patches on the Sea Surface

    NASA Astrophysics Data System (ADS)

    Dubucq, Dominique; Sicot, Guillaume; Lennon, Marc; Miegebielle, Véronique

    2016-06-01

    Detection of natural or accidental oil slick at sea surface is important both for exploration purposes and for environment protection. Radar imagery, either satellite or airborne is the prime tool to detect those slicks. Radar is widely used by the national agencies to monitor their maritime areas for accidental pollutions or boat discharges. Radar images can detect oil slick even in the presence of clouds. However the sea surface back scattered energy is rather insensitive to oil thickness. On the contrary several studies tend to prove that optical data may be used to estimate the oil thickness. These data may be in the form of hyperspectral data or thermal infrared data. The objective of this study is to show that SWIR satellite data which are more widely available than hyperspectral data, better resolved than thermal data and available at a very limited cost, can be used to detect and qualitatively assess the thickness of oil slicks. This is important to assess volumes of naturally release oil in the oceans and in case of a crisis to send intervention teams where oil is thickest.

  15. Staple Line Coverage with a Polyglycolic Acid Patch and Fibrin Glue without Pleural Abrasion after Thoracoscopic Bullectomy for Primary Spontaneous Pneumothorax

    PubMed Central

    Hong, Ki Pyo; Kim, Do Kyun; Kang, Kyung Hoon

    2016-01-01

    Background This study was conducted to determine the efficacy of staple line coverage using a polyglycolic acid patch and fibrin glue without pleural abrasion to prevent recurrent postoperative pneumothorax. Methods A retrospective analysis was carried out of 116 operations performed between January 2011 and April 2013. During this period, staple lines were covered with a polyglycolic acid patch and fibrin glue in 58 cases (group A), while 58 cases underwent thoracoscopic bullectomy only (group B). Results The median follow-up period was 33 months (range, 22 to 55 months). The duration of chest tube drainage was shorter in group A (group A 2.7±1.2 day vs. group B 3.9±2.3 day, p=0.001). Prolonged postoperative air leakage occurred more frequently in group B than in group A (43% vs. 19%, p=0.005). The postoperative recurrence rate of pneumothorax was significantly lower in group A (8.6%) than in group B (24.1%) (p=0.043). The total cost of treatment during the follow-up period, including the cost for the treatment of postoperative recurrent pneumothorax, was not significantly different between the two groups (p=0.43). Conclusion Without pleural abrasion, staple line coverage with a medium-sized polyglycolic acid patch and fibrin glue after thoracoscopic bullectomy for primary spontaneous pneumothorax is a useful technique that can reduce the duration of postoperative pleural drainage and the postoperative recurrence rate of pneumothorax. PMID:27066431

  16. Thermodynamic and kinetic aspects of surface acidity

    SciTech Connect

    Dumesic, J.A.

    1992-01-01

    Our research in the general area of acid catalysis involves the characterization of solid acidity and the corresponding assessment of catalytic performance of acidic materials. Acid characterization studies are required to provide essential information about the type of acid site (i.e., Lewis versus Bronsted), the strength of the sites, and the mobility of molecules adsorbed on the acid sites. An accurate measure of acid strength is given by the heat of adsorption of a basic probe molecule on the acid site. A thermodynamic representation of the mobility of adsorbed species on these sites is given by the entropy of adsorption. Important techniques used in these acid site characterization studies include microcalorimetry, thermogravimetric measurements, temperature programmed desorption, infrared spectroscopy and solid state nuclear magnetic resonance. The combination of these acid site characterization studies with reaction kinetics measurements of selected catalytic processes allows the elucidation of possible relationships between surface thermodynamic and kinetic properties of acidic sites. Such relationships are important milestones in formulating effective strategies for the effective utilization of solid acid catalysts. Current work in this direction involves methylamine syntheses over various zeolites, and the basic probe molecules employed include ammonia, methanol, water and mono-, di- and tri-methylamines. 31 refs., 18 figs., 1 tab.

  17. Granisetron Transdermal Patch

    MedlinePlus

    ... patch. Each patch is stuck onto a thin plastic liner and a separate rigid plastic film. Do not open the pouch in advance, ... cut the patch into pieces. Peel the thin plastic liner off of the printed side of the ...

  18. Methylphenidate Transdermal Patch

    MedlinePlus

    ... still remove the patch at your regular patch removal time. Do not apply extra patches to make ... room temperature and away from excess heat and moisture (not in the bathroom). Do not refrigerate or ...

  19. Rivastigmine Transdermal Patch

    MedlinePlus

    ... still remove the patch at your regular patch removal time. If it is almost time for the ... room temperature and away from excess heat and moisture (not in the bathroom). Throw away any patches ...

  20. Acidic deposition and surface water chemistry

    NASA Astrophysics Data System (ADS)

    Church, M. R.

    A pair of back-to-back (morning and afternoon) hydrology sessions, held December 10, 1987, at the AGU Fall Meeting in San Francisco, Calif., covered “Predicting the Effects of Acidic Deposition on Surface Water Chemistry.” The combined sessions included four invited papers, 12 contributed papers, and a panel discussion at its conclusion. The gathering dealt with questions on a variety of aspects of modeling the effects of acidic deposition on surface water chemistry.Contributed papers included discussions on the representation of processes in models as well as limiting assumptions in model application (V. S. Tripathi et al., Oak Ridge National Laboratory, Oak Ridge, Tenn., and E. C. Krug, Illinois State Water Survey, Champaign), along with problems in estimating depositional inputs to catchments and thus inputs to be used in the simulation of catchment response (M. M. Reddy et al., U.S. Geological Survey, Lakewood, Colo.; and E. A. McBean, University of Waterloo, Waterloo, Canada). L. A. Baker et al. (University of Minnesota, Minneapolis) dealt with the problem of modeling seepage lake systems, an exceedingly important portion of the aquatic resources in Florida and parts of the upper U.S. Midwest. J. A. Hau and Y. Eckstein (Kent State University, Kent, Ohio) considered equilibrium modeling of two northern Ohio watersheds that receive very different loads of acidic deposition but are highly similar in other respects.

  1. Formulation Optimization of Arecoline Patches

    PubMed Central

    Wu, Pao-Chu; Tsai, Pi-Ju; Lin, Shin-Chen; Huang, Yaw-Bin

    2014-01-01

    The response surface methodology (RSM) including polynomial equations has been used to design an optimal patch formulation with appropriate adhesion and flux. The patch formulations were composed of different polymers, including Eudragit RS 100 (ERS), Eudragit RL 100 (ERL) and polyvinylpyrrolidone K30 (PVP), plasticizers (PEG 400), and drug. In addition, using terpenes as enhancers could increase the flux of the drug. Menthol showed the highest enhancement effect on the flux of arecoline. PMID:24707220

  2. Establishment of an in vitro Peyer's patch cell culture system correlative to in vivo study using intestine and screening of lactic acid bacteria enhancing intestinal immunity.

    PubMed

    Jin, Hekui; Higashikawa, Fumiko; Noda, Masafumi; Zhao, Xingrong; Matoba, Yasuyuki; Kumagai, Takanori; Sugiyama, Masanori

    2010-01-01

    Some lactic acid bacteria (LAB) are known as representative of probiotics. To screen LAB effective to enhance intestinal immunity, in the present study, we developed an accurate and convenient in vitro evaluation system using Peyer's patch cells (PP-cells) isolated from the mice intestine. We observed that the amount of immunoglobulin A (IgA) produced by PP-cells co-cultured with LAB was well correlative to that in PP-cells, intestine and feces isolated from live mice after oral administration of LAB [correlation coefficient (r)=0.888, 0.883, and 0.920, respectively]. In addition, using this in vitro system, we suggest that the IgA level of PP-cells co-culturing with plant-derived LAB might be more enhanced than with animal-derived LAB. PMID:20118555

  3. Granisetron Transdermal Patch

    MedlinePlus

    ... the patch. Each patch is stuck onto a thin plastic liner and a separate rigid plastic film. Do not open the pouch in advance, because ... to cut the patch into pieces. Peel the thin plastic liner off of the printed side ... one piece of the plastic film from the sticky side of the patch. Be ...

  4. Demonstration of an instrumented patch

    NASA Astrophysics Data System (ADS)

    Martinez, M.; Renaud, G.; Backman, D.; Genest, M.; Delannoy, M.

    2007-04-01

    The primary objective of this study was to demonstrate the effectiveness of various strain measurement techniques at detecting the disbonding of a composite repair patch and then using this information to validate a new capacitance based disbond detection technique. The instrumented repair patch was parametrically designed with the help of Finite Element Analysis (FEA) software to have a stress concentration at its tip. This stress concentration was designed to produce a disbond during fatigue testing, without the need for the introduction of any foreign material to create an artificial disbond condition. The aluminum substrate was grit blasted and the instrumented patch was bonded using FM ®73 adhesive, and was cured following the recommendations of the manufacturer. The geometric characteristics of the patch followed standard repair guidelines for such variables as material selection, taper angles and loading conditions, with the exception of the area designed for premature disbond. All test specimens were inspected using non-destructive testing technique (ultrasound pulse echo) to guarantee that no disbonding had occurred during curing of the specimen. The specimens were placed under fatigue loading to induce a disbond condition between the aluminum substrate and the patch. The specimens were cyclically loaded and strain gauges bonded to strategic locations on the aluminum and composite patch surface to be able to measure changes in surface strains as the disbond progressed. A Digital Image Correlation (DIC) system was also used to measure full field strains over the gauge length of the coupon. The DIC results were compared with the strain gauge data and were used to provide a qualitative measure of the load transfer in the bonded specimen, which clearly demonstrated the change in surface strain that occurred as the composite patch disbonded from the aluminum substrate. Thermoelastic Stress Analysis (TSA) was also used to measure surface strains on the

  5. Patch scale turbulence over dryland and irrigated surfaces in a semi-arid landscape during BEAREX08

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Quantifying turbulent fluxes of heat and water vapor over heterogeneous surfaces presents unique challenges. For example, in many arid and semi-arid regions, parcels of irrigated cropland are juxtaposed with hot, dry surfaces. Contrasting surface conditions can result in the advection of warm dry ai...

  6. Mucoadhesive patches of Salbutamol sulphate for unidirectional buccal drug delivery: development and evaluation.

    PubMed

    Puratchikody, Ayarivan; Prasanth, V V; Mathew, Sam T; Kumar, B Ashok

    2011-07-01

    Mucoadhesive buccal patches of Salbutamol Sulphate were prepared using five different polymers (polyvinylpyrrolidone [PVP]), polyvinyl alcohol [PVA], water soluble chitosan [CH(WS)], acid soluble chitosan [CH(AS)], hydroxypropyl methyl cellulose [HPMC])in various proportions and combinations (CH(WS)/PVP/HPMC, CH(WS)/PVA/HPMC, CH(AS)/PVP/HPMC, and CH(AS)/PVA/HPMC). A 3(2) full factorial design was used to design the experiments. A total of 72 patches were prepared. Thickness of the patches ranged between 0.3±0.003 and 0.6±0.009 mm. Mass of the patches were in the range of 68.12±4.6 to 95.02±7.2 mg. Patches showed increased mass whenever PEG -400 was used as plasticizer. The surface pH of patches were acidic to neutral (pH 4-pH 7). Patches showed satisfactory drug loading efficiency (85%to 97%). Eight formulations(C9, C18, C27, C36, D9, D18, D27, and D36)-which showed high folding endurance- were selected for further characterization. Patches with PEG -400 showed higher swelling index when compared to PG. The residence time of the patches ranged between 115 min and 120 min. Formulation C18 showed the maximum in vitro drug release of 101.4 % over a period of 120 min. Formulations D36 and C36 were best fitted to Higuchi model. The remaining formulations were best fitted to the Korsmeyer-Peppas model. Drug permeation was fast and showed the similar profile as that of the in vitro drug release. Patches were stable, during and at the end of the accelerated stability study. PMID:21453255

  7. RF MEMS reconfigurable triangular patch antenna.

    SciTech Connect

    Nordquist, Christopher Daniel; Christodoulou, Christos George; Feldner, Lucas Matthew

    2005-01-01

    A Ka-band RF MEMS enabled frequency reconfigurable triangular microstrip patch antenna has been designed for monolithic integration with RF MEMS phase shifters to demonstrate a low-cost monolithic passive electronically scanned array (PESA). This paper introduces our first prototype reconfigurable triangular patch antenna currently in fabrication. The aperture coupled patch antenna is fabricated on a dual-layer quartz/alumina substrate using surface micromachining techniques.

  8. RF MEMS reconfigurable triangular patch antenna.

    SciTech Connect

    Christodoulou, Christos George; Nordquist, Christopher Daniel; Feldner, Lucas Matthew

    2005-07-01

    A Ka-band RF MEMS enabled frequency reconfigurable triangular microstrip patch antenna has been designed for monolithic integration with RF MEMS phase shifters to demonstrate a low-cost monolithic passive electronically scanned array (PESA). This paper introduces our first prototype reconfigurable triangular patch antenna currently in fabrication. The aperture coupled patch antenna is fabricated on a dual-layer quartz/alumina substrate using surface micromachining techniques.

  9. Keratin K18 Increases Cystic Fibrosis Transmembrane Conductance Regulator (CFTR) Surface Expression by Binding to Its C-terminal Hydrophobic Patch*

    PubMed Central

    Duan, Yuanyuan; Sun, Ying; Zhang, Fan; Zhang, Wei Kevin; Wang, Dong; Wang, Yan; Cao, Xu; Hu, Wenbao; Xie, Changyan; Cuppoletti, John; Magin, Thomas M.; Wang, Haixia; Wu, Zhenguo; Li, Ning; Huang, Pingbo

    2012-01-01

    Malfunction of the cystic fibrosis transmembrane conductance regulator (CFTR) leads to cystic fibrosis, but the regulation of CFTR is not fully understood. Here, we identified the intermediate filament protein keratin K18 (K18) as a CFTR-binding protein by various approaches. We mapped a highly conserved “hydrophobic patch” (1413FLVI1416) in the CFTR C-terminus, known to determine plasmalemmal CFTR stability, as the K18-binding site. On the other hand, the C-terminal tail of K18 was found to be a critical determinant for binding CFTR. Overexpression of K18 in cells robustly increased the surface expression of wild-type CFTR, whereas depletion of K18 through RNA interference specifically diminished it. K18 binding increased the surface expression of CFTR by accelerating its apical recycling rate without altering CFTR biosynthesis, maturation, or internalization. Importantly, CFTR surface expression was markedly reduced in duodenal and gallbladder epithelia of K18−/− mice. Taken together, our results suggest that K18 increases the cell surface expression of CFTR by interacting with the CFTR C-terminal hydrophobic patch. These findings offer novel insights into the regulation of CFTR and suggest that K18 and its dimerization partner, K8, may be modifier genes in cystic fibrosis. PMID:23045527

  10. Lidocaine Transdermal Patch

    MedlinePlus

    ... that area. Use scissors to remove the outer seal from the package. Then pull apart the zipper seal. Remove up to three patches from the package and press the zipper seal tightly together. The remaining patches may dry out ...

  11. Metal Patch Antenna

    NASA Technical Reports Server (NTRS)

    Chamberlain, Neil F. (Inventor); Hodges, Richard E. (Inventor); Zawadzki, Mark S. (Inventor)

    2012-01-01

    Disclosed herein is a patch antenna comprises a planar conductive patch attached to a ground plane by a support member, and a probe connector in electrical communication with the conductive patch arranged to conduct electromagnetic energy to or from the conductive patch, wherein the conductive patch is disposed essentially parallel to the ground plane and is separated from the ground plane by a spacing distance; wherein the support member comprises a plurality of sides disposed about a central axis oriented perpendicular to the conductive patch and the ground plane; wherein the conductive patch is solely supported above the ground plane by the support member; and wherein the support member provides electrical communication between the planer conductive patch and the ground plane.

  12. Targeting of glycoprotein I (gE) of varicella-zoster virus to the trans-Golgi network by an AYRV sequence and an acidic amino acid-rich patch in the cytosolic domain of the molecule.

    PubMed Central

    Zhu, Z; Hao, Y; Gershon, M D; Ambron, R T; Gershon, A A

    1996-01-01

    Previous studies suggested that varicella-zoster virus (VZV) envelope glycoproteins (gps) are selectively transported to the trans-Golgi network (TGN) and that the cytosolic domain of gpI (gE) targets it to the TGN. To identify targeting signals in the gpI cytosolic domain, intracellular protein trafficking was studied in transfected cells expressing chimeric proteins in which a full-length or mutated gpI cytosolic domain was fused to the gpI transmembrane domain and interleukin-2 receptor (tac) ectodomain. Expressed protein was visualized with antibodies to tac. A targeting sequence (AYRV) and a second, acidic amino acid-rich region of the gpI cytosolic domain (putative signal patch) were each sufficient to cause expressed protein to colocalize with TGN markers. This targeting was lost when the tyrosine of the AYRV sequence was replaced with glycine or lysine, when arginine was replaced with glutamic acid, or when valine was substituted with lysine. In contrast, tyrosine could be replaced by phenylalanine and valine could be substituted with leucine. Mutation of alanine to aspartic acid or deletion of alanine abolished TGN targeting. Exposure of transfected cells to antibodies to the tac ectodomain revealed that the TCN targeting of expressed tac-gpI chimeric proteins occurred as a result of selective retrieval from the plasmalemma. These data suggest that the AYRV sequence and a second signaling patch in the cytosolic domain of gpI are responsible for its targeting to the TGN. The observations also support the hypothesis that the TGN plays a critical role in the envelopment of VZV. PMID:8794291

  13. A patch clamp study of the effects of ciprofloxacin and biphenyl acetic acid on rat hippocampal neurone GABAA and ionotropic glutamate receptors.

    PubMed

    Halliwell, R F; Davey, P G; Lambert, J J

    1995-12-01

    The neurotoxic effects of 4-quinolones alone and in combination with certain non-steroidal anti-inflammatory drugs (NSAIDs) may be related to an interaction at GABAA and/or ionotropic glutamate receptors. In the present study, the effects of the fluoroquinolone, ciprofloxacin, alone and in combination with the NSAID, biphenyl acetic acid (BPAA), were examined on GABAA-, NMDA-, AMPA-, and kainate-evoked current responses recorded from cultured rat hippocampal neurones, using the whole cell patch clamp technique. GABA-evoked currents were reversibly inhibited by bicuculline (3 microM) and ciprofloxacin (100 microM) to 11 +/- 5 and 38 +/- 7% of control, respectively. BPAA (100 microM) had little affect on the GABA current (the response was 82 +/- 4% of control) but enhanced the inhibitory potency of ciprofloxacin by approx. 3000-fold. The antagonist effects of ciprofloxacin (30 microM) and ciprofloxacin (0.03 microM) together with BPAA (100 microM) on the GABA-evoked current were not voltage-dependent. Whole cell currents evoked by NMDA, AMPA or kainate were little influenced by ciprofloxacin (100 microM), BPAA (100 microM), or ciprofloxacin plus BPAA (both at 100 microM); the responses being > or = 90% of control in all cases. These data suggest that the proconvulsant effects of quinolones when combined with BPAA may be related to antagonism of central GABAA receptors but not to an interaction at ionotropic glutamate receptors. PMID:8788959

  14. Modelling Surface Energy Fluxes over Maize using a Two-Source Patch Model and Radiometric Soil and Canopy Temperature Observations.

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Models estimating surface energy fluxes over partial canopy cover with thermal remote sensing must account for significant differences between the radiometric temperatures and turbulent exchange rates associated with the soil and canopy components of the thermal pixel scene. Recent progress in separ...

  15. Dye Indicators for Acidic or Basic Surface Contamination

    NASA Technical Reports Server (NTRS)

    Lakin, A.; Schuler, F.

    1984-01-01

    Application of pH-sensitive dye solution serves as test for acidic or basic contamination of critical bonding surface. Aqueous solution of 0.1 percent Direct Red No. 28 capable of indicating acid activating solution down to 10 parts per million on hardware and tooling. Dye did not cause detectable contamination of surface.

  16. Surface-active properties of humic and sulfochlorohumic acids

    SciTech Connect

    Ryabova, I.N.; Mustafina, G.A.; Akkulova, Z.G.; Satymbaeva, A.S.

    2009-10-15

    The surface tension of alkaline solutions of humic acids and their sulfochloroderivatives, which are synthesized by sulfonation of chlorohumic acids isolated from coal chlorinated by the electrochemical method, is investigated. It is established that humic compounds possess weak surface activity. Basic adsorption parameters are calculated.

  17. Effect of moisture on the surface free energy and acid-base properties of mineral oxides.

    PubMed

    Sun, Chenhang; Berg, John C

    2002-09-01

    Surface energetic properties of mineral oxides are important in many applications. Since oxide surfaces in practice have generally come in contact with water molecules, it is important to know how water coverage affects the surface properties. In this work, five oxide samples, namely MgO, Al2O3, TiO2, SnO2 and SiO2 are heat-treated to various extents, to produce different degrees of hydration, and characterized thereafter by inverse gas chromatography. Water contents of the treated samples are determined independently by Karl Fischer titration, and specific surface areas are measured by the BET method. The results show that in general as water coverage decreases, the Lifshitz-van der Waals component of the specific surface free energy (sigma(S)LW) increases, but the acid-base interaction potential (-deltaG(AB)) decreases. These attributes are more sensitive to changes in water coverage at lower coverages, where the surface is presumed to consist of patches of molecular water and unhydrated hydroxyl groups. PMID:12385377

  18. Surface properties of superfine alumina trihydrate after surface modification with stearic acid

    NASA Astrophysics Data System (ADS)

    Liu, Gui-hua; Zhou, Bo-hao; Li, Yun-feng; Qi, Tian-gui; Li, Xiao-bin

    2015-05-01

    The surface properties of superfine alumina trihydrate (ATH) after surface modification were studied by measuring the contact angle, active ratio, oil adsorption, total organic carbon, adsorption ratio, and Fourier transform infrared (FTIR) spectrum. The contact angle increased initially and then slowly decreased with an increase of the amount of stearic acid. However, the surface free energy decreased initially and then increased. Surface modification with stearic acid or sodium stearate can benefit from elevating temperature. The base surface tension component and the free energy of Lewis acid-base both declined sharply following the surface modification. Excess stearic acid was physically adsorbed in the form of multilayer adsorption, and an interaction between oxygen on the ATH surface and hydroxyl in stearic acid was subsequently determined. Our results further indicated that the contact angle and adsorption ratio can be used as control indicators for surface modification compared with active ratio, oil adsorption and total organic carbon.

  19. Molecular controls on kaolinite surface charge and organic acid adsorption

    SciTech Connect

    Brady, P.V.; Cygan, R.T.; Nagy, K.L.; Ward, D.B.

    1996-10-01

    pH-dependent multi-site kaolinite surface charge can be explained by proton donor-acceptor reactions occurring simultaneously on Si and Al sites exposed on edge sites. Si site acidity at the kaolinite-solution interface differs minimally from that of pure SiO{sub 2}, whereas Al sites became appreciably more acidic when a part of the kaolinite matrix. Independent evidence from scanning force microscopy points to a higher percentage of edge surface area due to thicker particles and basal surface steps than previously assumed. Molecular modeling of the proton-relaxed kaolinite structure has been used to establish the elevated acidity of edge Al sites, to independently confirm the crystallochemical controls on surface acidity, and to establish likely bonding geometries for adsorbed organic acids, such as oxalate.

  20. Electrostatic patch potentials in Casimir force measurements

    NASA Astrophysics Data System (ADS)

    Garrett, Joseph; Somers, David; Munday, Jeremy

    2015-03-01

    Measurements of the Casimir force require the elimination of the electrostatic force between interacting surfaces. The force can be minimized by applying a potential to one of the two surfaces. However, electrostatic patch potentials remain and contribute an additional force which can obscure the Casimir force signal. We will discuss recent measurements of patch potentials made with Heterodyne Amplitude-Modulated Kelvin Probe Force Microscopy that suggest patches could be responsible for >1% of the signal in some Casimir force measurements, and thus make the distinction between different theoretical models of the Casimir force (e.g. a Drude-model or a plasma-model for the dielectric response) difficult to discern.

  1. A novel conformational B-cell epitope prediction method based on mimotope and patch analysis.

    PubMed

    Sun, Pingping; Qi, Jialiang; Zhao, Yizhu; Huang, Yanxin; Yang, Guifu; Ma, Zhiqiang; Li, Yuxin

    2016-04-01

    A B-cell epitope is a group of residues on the surface of an antigen that stimulates humoral immune responses. Identifying B-cell epitopes is important for effective vaccine design. Predicting epitopes by experimental methods is expensive in terms of time, cost and effort; therefore, computational methods that have a low cost and high speed are widely used to predict B-cell epitopes. Recently, epitope prediction based on random peptide library screening has been viewed as a promising method. Some novel software and web-based servers have been proposed that have succeeded in some test cases. Herein, we propose a novel epitope prediction method based on amino acid pairs and patch analysis. The method first divides antigen surfaces into overlapping patches based on both radius (R) and number (N), then predict epitopes based on Amino Acid Pairs (AAPs) from mimotopes and the surface patch. The proposed method yields a mean sensitivity of 0.53, specificity of 0.77, ACC of 0.75 and F-measure of 0.45 for 39 test cases. Compared with mimotope-based methods, patch-based methods and two other prediction methods, the sensitivity of the new method offers a certain improvement. Our findings demonstrate that this proposed method was successful for patch and AAPs analysis and allowed for conformational B-cell epitope prediction. PMID:26804644

  2. Holocene interdependences of changes in sea surface temperature, productivity, and fluvial inputs in the Iberian continental shelf (Tagus mud patch)

    NASA Astrophysics Data System (ADS)

    Rodrigues, Teresa; Grimalt, Joan O.; Abrantes, FáTima G.; Flores, Jose A.; Lebreiro, Susana M.

    2009-07-01

    Sea surface temperature (SST), marine productivity, and fluvial input have been reconstructed for the last 11.5 calendar (cal) ka B.P. using a high-resolution study of C37 alkenones, coccolithophores, iron content, and higher plant n-alkanes and n-alkan-1-ols in sedimentary sequences from the inner shelf off the Tagus River Estuary in the Portuguese Margin. The SST record is marked by a continuous decrease from 19°C, at 10.5 and 7 ka, to 15°C at present. This trend is interrupted by a fall from 18°C during the Roman and Medieval Warm Periods to 16°C in the Little Ice Age. River input was very low in the early Holocene but increased in the last 3 cal ka B.P. in association with an intensification of agriculture and deforestation and possibly the onset of the North Atlantic Oscillation/Atlantic Multidecadal Oscillation modes of variability. River influence must have reinforced the marine cooling trend relative to the lower amplitude in similar latitude sites of the eastern Atlantic. The total concentration of alkenones reflects river-induced productivity, being low in the early Holocene but increasing as river input became more important. Rapid cooling, of 1-2°C occurring in 250 years, is observed at 11.1, 10.6, 8.2, 6.9, and 5.4 cal ka B.P. The estimated age of these events matches the ages of equivalent episodes common in the NE Atlantic-Mediterranean region. This synchronicity reveals a common widespread climate feature, which considering the twentieth century analog between colder SSTs and negative North Atlantic Oscillation (NAO), is likely to reflect periods of strong negative NAO.

  3. Patch voltage clamp of squid axon membrane.

    PubMed

    Fishman, H M

    1975-12-01

    A small area (patch) of the external surface of a squid axon can be "isolated" electrically from the surrounding bath by means of a pair of concentric glass pipettes. The seawater-filled inner pipette makes contact with the axon and constitutes the external access to the patch. The outer pipette is used to direct flowing sucrose solution over the area surrounding the patch of membrane underlying the inner pipette. Typically, sucrose isolated patches remain in good condition (spike amplitude greater than 90 mV) for periods of approximately one half hour. Patches of axon membrane which had previously been exposed to sucrose solution were often excitable. Membrane survival of sucrose treatment apparently arises from an outflow of ions from the axon and perhaps satellite cells into the interstitial cell space surrounding the exolemma. Estimate of the total access resistance (electrode plus series resistance) to the patch is about 100 komega (7 omega cm2). Patch capacitance ranges from 10-100 pF, which suggests areas of 10(-4) to 10(-5) cm2 and resting patch resistances of 10-100 Momega. Shunt resistance through the interstitial space exposed to sucrose solution, which isolates the patch, is typically 1-2 Momega. These parameters indicate that good potential control and response times can be achieved on a patch. Furthermore, spatial uniformity is demonstrated by measurement of an exoplasmic isopotential during voltage clamp of an axon patch. The method may be useful for other preparations in which limited membrane area is available or in special instances such as in the measurement of membrane conduction noise. PMID:1214276

  4. INFLUENCE OF AQUEOUS ALUMINUM AND ORGANIC ACIDS ON MEASUREMENT OF ACID NEUTRALIZING CAPACITY IN SURFACE WATERS

    EPA Science Inventory

    Acid neutralizing capacity (ANC) is used to quantify the acid-base status of surface waters. Acidic waters have bean defined as having ANC values less than zero, and acidification is often quantified by decreases in ANC. Measured and calculated values of ANC generally agree, exce...

  5. Facile colloidal coating of polystyrene nanospheres with tunable gold dendritic patches

    NASA Astrophysics Data System (ADS)

    Bao, Huixin; Bihr, Timo; Smith, Ana-Sunčana; Klupp Taylor, Robin N.

    2014-03-01

    Patchy particles comprise regions of differing material or chemical functionality on otherwise isotropic cores. To meet the great potential of these anisotropic structures in a wide range of application fields, completely new approaches are sought for the scalable and tunable production of patchy particles, particularly those with nanoscale dimensions. In this paper the synthesis of patchy particles via a simple colloidal route is investigated. Using surfactant-free cationic polystyrene nanospheres as core particles, gold patches are produced through the in situ reduction of chloroauric acid with ascorbic acid. The fact that such nanostructured metal patches can be heterogeneously nucleated on polymer nanospheres is related to the electrostatic interaction between core and metal precursor. Furthermore, the lateral expansion of the gold patches over the polystyrene surface is facilitated by an excess of ascorbic acid. The morphology of the patches is highly dendritic and process-induced variations in the structure are related to gold surface mobility using Monte Carlo simulations based on the diffusion limited aggregation principle. Considering the pH dependent behaviour of ascorbic acid it is possible to predict the moiety which most likely adsorbs to the polymer surface and promotes gold surface diffusion. This enables the judicious adjustment of the pH to also obtain non-dendritic patches. On account of the plasmonic behaviour of gold, the patchy particles have morphology-dependent optical properties. The systematic development of the synthetic approach described here is expected to lay a foundation for the development of functional materials based on the self- or directed-assembly of nanoscale building blocks with anisotropic interactions and properties.Patchy particles comprise regions of differing material or chemical functionality on otherwise isotropic cores. To meet the great potential of these anisotropic structures in a wide range of application fields

  6. Factors affecting response of surface waters to acidic deposition

    SciTech Connect

    Turner, R.S.; Johnson, D.W.; Elwood, J.W.; Van Winkle, W.; Clapp, R.B.; Reuss, J.O.

    1986-04-01

    Knowledge of watershed hydrology and of the biogeochemical reactions and elemental pools and fluxes occurring in watersheds can be used to classify the response of watersheds and surface waters to acidic deposition. A conceptual mosel is presented for classifying watersheds into those for which (1) surface water chemistry will change rapidly with deposition quality (direct response) (2) surface water chemistry will change only slowly over time (delayed response), and (3) surface water chemistry will not change significantly, even with continued acidic deposition (capacity-protected). Techniques and data available for classification of all watersheds in a region into these categories are discussed.

  7. Fentanyl Transdermal Patch

    MedlinePlus

    ... pain, pain after an operation or medical or dental procedure, or pain that can be controlled by medication that is ... transdermal patch.if you are having surgery, including dental surgery, tell the ... to prevent or treat constipation while you are using fentanyl patches.

  8. Oxalic acid adsorption states on the clean Cu(110) surface

    NASA Astrophysics Data System (ADS)

    Fortuna, Sara

    2016-11-01

    Carboxylic acids are known to assume a variety of configurations on metallic surfaces. In particular oxalic acid on the Cu(110) surface has been proposed to assume a number of upright configurations. Here we explore with DFT calculations the possible structures that oxalic acid can form on copper 110 at different protonation states, with particular attention at the possibility of forming structures composed of vertically standing molecules. In its fully protonated form it is capable of anchoring itself on the surface thanks to one of its hydrogen-free oxygens. We show the monodeprotonated upright molecule with two oxygens anchoring it on the surface to be the lowest energy conformation of a single oxalic molecules on the Cu(110) surface. We further show that it is possible for this configuration to form dense hexagonally arranged patterns in the unlikely scenario in which adatoms are not involved.

  9. Thermodynamic and kinetic aspects of surface acidity. Progress report

    SciTech Connect

    Dumesic, J.A.

    1992-04-01

    Our research in the general area of acid catalysis involves the characterization of solid acidity and the corresponding assessment of catalytic performance of acidic materials. Acid characterization studies are required to provide essential information about the type of acid site (i.e., Lewis versus Bronsted), the strength of the sites, and the mobility of molecules adsorbed on the acid sites. An accurate measure of acid strength is given by the heat of adsorption of a basic probe molecule on the acid site. A thermodynamic representation of the mobility of adsorbed species on these sites is given by the entropy of adsorption. Important techniques used in these acid site characterization studies include microcalorimetry, thermogravimetric measurements, temperature programmed desorption, infrared spectroscopy and solid state nuclear magnetic resonance. The combination of these acid site characterization studies with reaction kinetics measurements of selected catalytic processes allows the elucidation of possible relationships between surface thermodynamic and kinetic properties of acidic sites. Such relationships are important milestones in formulating effective strategies for the effective utilization of solid acid catalysts. Current work in this direction involves methylamine syntheses over various zeolites, and the basic probe molecules employed include ammonia, methanol, water and mono-, di- and tri-methylamines. 31 refs., 18 figs., 1 tab.

  10. Koch fractal boundary patch over reactive impedance

    NASA Astrophysics Data System (ADS)

    Reddy V, Venkateshwar; Sarma, N. V. S. N.

    2013-04-01

    This paper describes the enhancement of bandwidth and miniaturization for patch antennas. Introduction of fractal structure (Square Koch) over reactive impedance surface (RIS) is used to enhance impedance bandwidth while minimizing the patch size. Comparison has been made with those of a single-layer (sub1) antenna and the corresponding dual-layer (RIS) antenna. Approximately double the impedance bandwidth is achieved with the proposed RIS Square Koch antenna 1 when compared with Square Koch antenna 1without RIS. There is a 55 % reduction in the patch size. The simulated results indicate that the presented antennas provide gain of about 2.5dBi over the entire band of frequencies.

  11. Interactions of Gaseous Nitric Acid with Surfaces of Environmental Interest

    SciTech Connect

    Dubowski, Y; Sumner, Ann Louise; Menke, E J.; Gaspar, Dan J.; Newberg, J T.; Hoffman, Rachel C.; Penner, R M.; Hemminger, J C.; Finlayson-Pitts, Barbara J.

    2004-07-21

    Gaseous nitric acid removal by surfaces in experimental systems and in the atmospheric boundary layer is rapid. However, neither the form of HNO? on surfaces nor its impact on the properties of the thin surface film are known. We report here studies of surfaces that have been exposed at room temperature (295 ? 2 K) to gaseous mixtures of water vapor with HNO? at concentrations from 46 ppb to 4 x 10? ppm. The surfaces were probed using a combination of Fourier transform infrared spectrometry (FTIR), non-contact atomic force microscopy (AFM), time-of-flight secondary ion mass spectrometry (TOF-SIMS), and X-ray photoelectron spectroscopy (XPS). Exposure of borosilicate glass, quartz, and thin Teflon films to mixtures of gaseous HNO? and water vapor leads to the subsequent uptake of much larger amounts of water than occurs on the corresponding unexposed surfaces. Infrared spectra show evidence for the formation of nitric acid?water complexes on the surface that leads to this enhanced water uptake. On borosilicate glass, exposure to the nitric acid?water vapor mixture results in surface segregation of the trace metal oxides and their nitrates formed from reaction with HNO?. The majority of these oxides can be removed by rinsing with water; however, smaller, segregated regions of ZnO remain on the surface. The implications for heterogeneous reactions in thin films on surfaces in laboratory systems and in the atmosphere are discussed.

  12. Facile colloidal coating of polystyrene nanospheres with tunable gold dendritic patches.

    PubMed

    Bao, Huixin; Bihr, Timo; Smith, Ana-Sunčana; Klupp Taylor, Robin N

    2014-04-21

    Patchy particles comprise regions of differing material or chemical functionality on otherwise isotropic cores. To meet the great potential of these anisotropic structures in a wide range of application fields, completely new approaches are sought for the scalable and tunable production of patchy particles, particularly those with nanoscale dimensions. In this paper the synthesis of patchy particles via a simple colloidal route is investigated. Using surfactant-free cationic polystyrene nanospheres as core particles, gold patches are produced through the in situ reduction of chloroauric acid with ascorbic acid. The fact that such nanostructured metal patches can be heterogeneously nucleated on polymer nanospheres is related to the electrostatic interaction between core and metal precursor. Furthermore, the lateral expansion of the gold patches over the polystyrene surface is facilitated by an excess of ascorbic acid. The morphology of the patches is highly dendritic and process-induced variations in the structure are related to gold surface mobility using Monte Carlo simulations based on the diffusion limited aggregation principle. Considering the pH dependent behaviour of ascorbic acid it is possible to predict the moiety which most likely adsorbs to the polymer surface and promotes gold surface diffusion. This enables the judicious adjustment of the pH to also obtain non-dendritic patches. On account of the plasmonic behaviour of gold, the patchy particles have morphology-dependent optical properties. The systematic development of the synthetic approach described here is expected to lay a foundation for the development of functional materials based on the self- or directed-assembly of nanoscale building blocks with anisotropic interactions and properties. PMID:24253323

  13. Surface reactions of iron - enriched smectites: adsorption and transformation of hydroxy fatty acids and phenolic acids

    NASA Astrophysics Data System (ADS)

    Polubesova, Tamara; Olshansky, Yaniv; Eldad, Shay; Chefetz, Benny

    2014-05-01

    Iron-enriched smectites play an important role in adsorption and transformation of soil organic components. Soil organo-clay complexes, and in particular humin contain hydroxy fatty acids, which are derived from plant biopolymer cutin. Phenolic acids belong to another major group of organic acids detected in soil. They participate in various soil processes, and are of concern due to their allelopathic activity. We studied the reactivity of iron-enriched smectites (Fe(III)-montmorillonite and nontronite) toward both groups of acids. We used fatty acids- 9(10),16-dihydroxypalmitic acid (diHPA), isolated from curtin, and 9,10,16-trihydroxypalmitic acid (triHPA); the following phenolic acids were used: ferulic, p-coumaric, syringic, and vanillic. Adsorption of both groups of acids was measured. The FTIR spectra of fatty acid-mineral complexes indicated inner-sphere complexation of fatty acids with iron-enriched smectites (versus outer-sphere complexation with Ca(II)-montmorillonite). The LC-MS results demonstrated enhanced esterification of fatty acids on the iron-enriched smectite surfaces (as compared to Ca(II)-montmorillonite). This study suggests that fatty acids can be esterified on the iron-enriched smectite surfaces, which results in the formation of stable organo-mineral complexes. These complexes may serve as a model for the study of natural soil organo-clay complexes and humin. The reaction of phenolic acids with Fe(III)-montmorillonite demonstrated their oxidative transformation by the mineral surfaces, which was affected by molecular structure of acids. The following order of their transformation was obtained: ferulic >syringic >p-coumaric >vanillic. The LC-MS analysis demonstrated the presence of dimers, trimers, and tetramers of ferulic acid on the surface of Fe(III)-montmorillonite. Oxidation and transformation of ferulic acid were more intense on the surface of Fe(III)-montmorillonite as compared to Fe(III) in solution due to stronger complexation on

  14. Nicotine Transdermal Patch

    MedlinePlus

    ... patches are used to help people stop smoking cigarettes. They provide a source of nicotine that reduces ... cause harm to the fetus.do not smoke cigarettes or use other nicotine products while using nicotine ...

  15. Diclofenac Transdermal Patch

    MedlinePlus

    ... and making sure not to cut the zipper seal just below it. Pull apart the zipper seal on the envelope and remove one patch. Reseal the envelope by squeezing the zipper seal together. Make sure the envelope is closed tightly ...

  16. Lidocaine Transdermal Patch

    MedlinePlus

    ... patches are used to relieve the pain of post-herpetic neuralgia (PHN; the burning, stabbing pains, or ... in your eye, wash it with plenty of water or saline solution. Wash your hands after handling ...

  17. Rotigotine Transdermal Patch

    MedlinePlus

    ... that causes difficulties with movement, muscle control, and balance) including shaking of parts of the body, stiffness, slowed movements, and problems with balance. Rotigotine transdermal patches are also used to treat ...

  18. Methylphenidate Transdermal Patch

    MedlinePlus

    ... for ADHD, which may include counseling and special education. Make sure to follow all of your doctor's ... that was covered by the patch seizures motion tics or verbal tics believing things that are not ...

  19. Expanding the diversity of unnatural cell surface sialic acids

    SciTech Connect

    Luchansky, Sarah J.; Goon, Scarlett; Bertozzi, Carolyn R.

    2003-10-30

    Novel chemical reactivity can be introduced onto cell surfaces through metabolic oligosaccharide engineering. This technique exploits the substrate promiscuity of cellular biosynthetic enzymes to deliver unnatural monosaccharides bearing bioorthogonal functional groups into cellular glycans. For example, derivatives of N-acetylmannosamine (ManNAc) are converted by the cellular biosynthetic machinery into the corresponding sialic acids and subsequently delivered to the cell surface in the form of sialoglycoconjugates. Analogs of N-acetylglucosamine (GlcNAc) and N-acetylgalactosamine (GalNAc) are also metabolized and incorporated into cell surface glycans, likely through the sialic acid and GalNAc salvage pathways, respectively. Furthermore, GlcNAc analogs can be incorporated into nucleocytoplasmic proteins in place of {beta}-O-GlcNAc residues. These pathways have been exploited to integrate unique electrophiles such as ketones and azides into the target glycoconjugate class. These functional groups can be further elaborated in a chemoselective fashion by condensation with hydrazides and by Staudinger ligation, respectively, thereby introducing detectable probes onto the cell. In conclusion, sialic acid derivatives are efficient vehicles for delivery of bulky functional groups to cell surfaces and masking of their hydroxyl groups improves their cellular uptake and utilization. Furthermore, the successful introduction of photoactivatable aryl azides into cell surface glycans opens up new avenues for studying sialic acid-binding proteins and elucidating the role of sialic acid in essential processes such as signaling and cell adhesion.

  20. Amino acid conjugated self assembling molecules for enhancing surface wettability of fiber laser treated titanium surfaces

    NASA Astrophysics Data System (ADS)

    Akkan, Cagri K.; Hür, Deniz; Uzun, Lokman; Garipcan, Bora

    2016-03-01

    Surface wetting properties of implants are one of the most critical parameter, which determine the interaction of proteins and cells with the implant surface. In this regards, acid etching and sand blasting are the mostly used methods at surface modification of Titanium (Ti) for enhanced surface wettability. Besides, these kinds of modifications may cause a conflict whether the surface wettability is influenced by the process related surface contaminations or by the surface roughness. In contrast, lasers might be an option for the alteration of surface wetting properties via supporting micro and/or nano surface topographies while preventing surface chemical contaminations. In this work, we focused on two steps of surface processing approaches of Ti surface: physical and chemical modifications. Herein, we hierarchically structured Ti surfaces by using microsecond modulated pulsed fiber laser. Subsequently, laser structured and non-structured Ti surfaces were further modified with novel histidine and leucine Amino Acid conjugated Self-Assembled Molecules (His1-SAMs2 and Leu3-SAMs) to alter the surface wettability by introducing biologically hydrophilic and hydrophobic groups. Modification of Ti surfaces with His-SAMs and Leu-SAMs ended up with stable wetting properties when compared to non-modified surfaces after 7 days which may enhances the cell-surface interaction.

  1. DyninstAPI Patches

    2012-04-01

    We are seeking a code review of patches against DyninstAPI 8.0. DyninstAPI is an open source binary instrumentation library from the University of Wisconsin and University of Maryland. Our patches port DyninstAPI to the BlueGene/P and BlueGene/Q systems, as well as fix DyninstAPI bugs and implement minor new features in DyninstAPI.

  2. FNAL system patching design

    SciTech Connect

    Schmidt, Jack; Lilianstrom, Al; Romero, Andy; Dawson, Troy; Sieh, Connie; /Fermilab

    2004-01-01

    FNAL has over 5000 PCs running either Linux or Windows software. Protecting these systems efficiently against the latest vulnerabilities that arise has prompted FNAL to take a more central approach to patching systems. Due to different levels of existing support infrastructures, the patching solution for linux systems differs from that of windows systems. In either case, systems are checked for vulnerabilities by Computer Security using the Nessus tool.

  3. Tunable circular patch antennas

    NASA Astrophysics Data System (ADS)

    Lan, G.-L.; Sengupta, D. L.

    1985-10-01

    A method to control the resonant or operating frequencies of circular patch antennas has been investigated experimentally and theoretically. It consists of the placement of passive metallic or tuning posts at approximate locations within the input region of the antenna. Comparison of measured and analytical results seems to establish the validity of a theoretical model proposed to determine the input performance of such circular patch antennas.

  4. Aluminum in acidic surface waters: chemistry, transport, and effects.

    PubMed Central

    Driscoll, C T

    1985-01-01

    Ecologically significant concentrations of Al have been reported in surface waters draining "acid-sensitive" watersheds that are receiving elevated inputs of acidic deposition. It has been hypothesized that mineral acids from atmospheric deposition have remobilized Al previously precipitated within the soil during soil development. This Al is then thought to be transported to adjacent surface waters. Dissolved mononuclear Al occurs as aquo Al, as well as OH-, F-, SO4(2-), and organic complexes. Although past investigations have often ignored non-hydroxide complexes of Al, it appears that organic and F complexes are the predominant forms of Al in dilute (low ionic strength) acidic surface waters. The concentration of inorganic forms of Al increases exponentially with decreases in solution pH. This response is similar to the theoretical pH dependent solubility of Al mineral phases. The concentration of organic forms of Al, however, is strongly correlated with variations in organic carbon concentration of surface waters rather than pH. Elevated concentrations of Al in dilute acidic waters are of interest because: Al is an important pH buffer; Al may influence the cycling of important elements like P, organic carbon, and trace metals; and Al is potentially toxic to aquatic organisms. An understanding of the aqueous speciation of Al is essential for an evaluation of these processes. PMID:3935428

  5. Surface tensions of solutions containing dicarboxylic acid mixtures

    NASA Astrophysics Data System (ADS)

    Lee, Jae Young; Hildemann, Lynn M.

    2014-06-01

    Organic solutes tend to lower the surface tension of cloud condensation nuclei, allowing them to more readily activate. The surface tension of various dicarboxylic acid aerosol mixtures was measured at 20 °C using the Wilhelmy plate method. At lower concentrations, the surface tension of a solution with equi-molar mixtures of dicarboxylic acids closely followed that of a solution with the most surface-active organic component alone. Measurements of surface tension for these mixtures were lower than predictions using Henning's model and the modified Szyszkowski equation, by ˜1-2%. The calculated maximum surface excess (Γmax) and inverse Langmuir adsorption coefficient (β) from the modified Szyszkowski equation were both larger than measured values for 6 of the 7 mixtures tested. Accounting for the reduction in surface tension in the Köhler equation reduced the critical saturation ratio for these multi-component mixtures - changes were negligible for dry diameters of 0.1 and 0.5 μm, but a reduction from 1.0068 to 1.0063 was seen for the 4-dicarboxylic acid mixture with a dry diameter of 0.05 μm.

  6. Surface interactions of cesium and boric acid with stainless steel

    SciTech Connect

    Grossman-Canfield, N.

    1995-08-01

    In this report, the effects of cesium hydroxide and boric acid on oxidized stainless steel surfaces at high temperatures and near one atmosphere of pressure are investigated. This is the first experimental investigation of this chemical system. The experimental investigations were performed using a mass spectrometer and a mass electrobalance. Surfaces from the different experiments were examined using a scanning electron microscope to identify the presence of deposited species, and electron spectroscopy for chemical analysis to identify the species deposited on the surface. A better understanding of the equilibrium thermodynamics, the kinetics of the steam-accelerated volatilizations, and the release kinetics are gained by these experiments. The release rate is characterized by bulk vaporization/gas-phase mass transfer data. The analysis couples vaporization, deposition, and desorption of the compounds formed by cesium hydroxide and boric acid under conditions similar to what is expected during certain nuclear reactor accidents. This study shows that cesium deposits on an oxidized stainless steel surface at temperatures between 1000 and 1200 Kelvin. Cesium also deposits on stainless steel surfaces coated with boric oxide in the same temperature ranges. The mechanism for cesium deposition onto the oxide layer was found to involve the chemical reaction between cesium and chromate. Some revaporization in the cesium hydroxide-boric acid system was observed. It has been found that under the conditions given, boric acid will react with cesium hydroxide to form cesium metaborate. A model is proposed for this chemical reaction.

  7. Fault-patch stress-transfer efficiency in presence of sub-patch geometric complexity

    NASA Astrophysics Data System (ADS)

    Zielke, Olaf; Mai, Martin

    2015-04-01

    It is well known that faults are not planar surfaces. Instead they exhibit self-similar or self-affine properties that span a wide range of spatial (sub-micrometer to tens-of-kilometer). This geometric fault roughness has a distinct impact on amount and distribution of stresses/strains induced in the medium and on other portions of the fault. However, when numerically simulated (for example in multi-cycle EQ rupture simulations or Coulomb failure stress calculations) this roughness is largely ignored: individual fault patches --the incremental elements that build the fault surface in the respective computer models-- are planar and fault roughness at this and lower spatial scales is not considered. As a result, the fault-patch stress-transfer efficiency may be systematically too large in those numerical simulations with respect to the "actual" efficiency level. Here, we investigate the effect of sub-patch geometric complexity on fault-patch stress-transfer efficiency. For that, we sub-divide a fault patch (e.g., 1x1km) into a large number of sub-patches (e.g., 20x20m) and determine amount of induced stresses at selected positions around that patch for different levels and realizations of fault roughness. For each fault roughness level, we compute mean and standard deviation of the induced stresses, enabling us to compute the coefficient of variation. We normalize those values with stresses from the corresponding single (planar) fault patch, providing scaling factors and their variability for stress transfer efficiency. Given a certain fault roughness that is assumed for a fault, this work provides the means to implement the sub-patch fault roughness into investigations based on fault-patch interaction schemes.

  8. Sperm Patch-Clamp

    PubMed Central

    Lishko, Polina; Clapham, David E.; Navarro, Betsy; Kirichok, Yuriy

    2014-01-01

    Sperm intracellular pH and calcium concentration ([Ca2+]i) are two central factors that control sperm activity within the female reproductive tract. As such, the ion channels of the sperm plasma membrane that alter intracellular sperm [Ca2+] and pH play important roles in sperm physiology and the process of fertilization. Indeed, sperm ion channels regulate sperm motility, control sperm chemotaxis toward the egg in some species, and may trigger the acrosome reaction. Until recently, our understanding of these important molecules was rudimentary due to the inability to patch-clamp spermatozoa and directly record the activity of these ion channels under voltage clamp. Recently, we overcame this technical barrier and developed a method for reproducible application of the patch-clamp technique to mouse and human spermatozoa. This chapter covers important aspects of application of the patch-clamp technique to spermatozoa, such as selection of the electrophysiological equipment, isolation of spermatozoa for patch-clamp experiments, formation of the gigaohm seal with spermatozoa, and transition into the whole-cell mode of recording. We also discuss potential pitfalls in application of the patch-clamp technique to flagellar ion channels. PMID:23522465

  9. Surface acidity and degree of carburization of modified silver catalysts

    SciTech Connect

    Pestryakov, A.N.; Belousova, V.N.; Roznina, M.I.

    1993-11-10

    The effect has been studied of some compounds as modifying additives on the surface acidity, degree of carburization, aggregation and silver entrainement of silver-pumice catalysts for methanol oxidation. Catalyst samples have been tested in an industrial reactor. The probable mechanism of modifying action of the additives is discussed.

  10. Surface Behavior of Boronic Acid-Terminated Silicones.

    PubMed

    Mansuri, Erum; Zepeda-Velazquez, Laura; Schmidt, Rolf; Brook, Michael A; DeWolf, Christine E

    2015-09-01

    Silicone polymers, with their high flexibility, lie in a monolayer at the air-water interface as they are compressed until a critical pressure is reached, at which point multilayers are formed. Surface pressure measurements demonstrate that, in contrast, silicones that are end-modified with polar groups take up lower surface areas under compression because the polar groups submerge into the water phase. Boronic acids have the ability to undergo coordination with Lewis bases. As part of a program to examine the surface properties of boronic acids, we have prepared boronic acid-modified silicones (SiBAs) and examined them at the air-water interface to better understand if they behave like other end-functional silicones. Monolayers of silicones, aminopropylsilicones, and SiBAs were characterized at the air-water interface as a function of end functionalization and silicone chain length. Brewster angle and atomic force microscopies confirm domain formation and similar film morphologies for both functionalized and non-functionalized silicone chains. There is a critical surface pressure (10 mN m(-1)) independent of chain length that corresponds to a first-order phase transition. Below this transition, the film appears to be a homogeneous monolayer, whose thickness is independent of the chain length. Ellipsometry at the air-water interface indicates that the boronic acid functionality leads to a significant increase of film thickness at low molecular areas that is not seen for non-functionalized silicone chains. What differentiates the boronic acids from simple silicones or other end-functionalized silicones, in particular, is the larger area occupied by the headgroup when under compression compared to other or non-end-functionalized silicones, which suggests an in-plane rather than submerged orientation that may be driven by boronic acid self-complexation. PMID:26263385

  11. Kirchhoff plate theory-based electromechanically-coupled analytical model considering inertia and stiffness effects of a surface-bonded piezoelectric patch

    NASA Astrophysics Data System (ADS)

    Yoon, Heonjun; Youn, Byeng D.; Kim, Heung Soo

    2016-02-01

    As a compact and durable design concept, piezoelectric energy harvesting skin (PEH skin) has been recently proposed for self-powered electronic device applications. This study aims to develop an electromechanically-coupled analytical model of PEH skin considering the inertia and stiffness effects of a piezoelectric patch. Based on Kirchhoff plate theory, Hamilton’s principle is used to derive the electromechanically-coupled differential equation of motion. Due to the geometric discontinuity of the piezoelectric patch, the Rayleigh-Ritz method is applied to calculate the natural frequency and corresponding mode shapes. The electrical circuit equation is derived from Gauss’s law. Output voltage is estimated by solving the equation of motion and electrical circuit equation, simultaneously. For the purpose of evaluating the predictive capability, the results of the electromechanically-coupled analytical model are compared with those of the finite element method in a hierarchical manner. The outstanding merits of the electromechanically-coupled analytical model of PEH skin are three-fold: (1) consideration of the inertia and stiffness effects of the piezoelectric patches; (2) physical parameterization between the two-dimensional mechanical configuration and piezoelectric transduction; (3) manipulability of the twisting modes of a cantilever plate with a small aspect ratio.

  12. STS-62 crew patch

    NASA Technical Reports Server (NTRS)

    1993-01-01

    The STS-62 crew patch depicts the world's first reusable spacecraft on its sixteenth flight. Columbia is in its entry-interface attitude as it prepares to return to Earth. The varied hues of the rainbow on the horizon connote the varied, but complementary, nature of all the payloads united on this mission. The upward-pointing vector shape of the patch is symbolic of America's reach for excellence in its unswerving pursuit to explore the frontiers of space. The brilliant sunrise just beyond Columbia suggests the promise that research in space holds for the hopes and dreams of future generations. The STS-62 insignia was designed by Mark Pestana.

  13. Surface acidity scales: Experimental measurements of Brønsted acidities on anatase TiO2 and comparison with coinage metal surfaces

    NASA Astrophysics Data System (ADS)

    Silbaugh, Trent L.; Boaventura, Jaime S.; Barteau, Mark A.

    2016-08-01

    The first quantitative surface acidity scale for Brønsted acids on a solid surface is presented through the use of titration-displacement and equilibrium experiments on anatase TiO2. Surface acidities of species on TiO2 correlated with gas phase acidities, as was previously observed in qualitative studies of Brønsted acid displacement on Ag(110), Cu(110) and Au(111). A 90% compression of the surface acidity scale relative to the gas phase was observed due to compensation from the covalent component of the conjugate base - surface bond. Adsorbed conjugate bases need not be completely anionic for correlations with gas phase acidities to hold. Positive and negative substituent effects, such as substituted fluorine and hydrocarbon sidechain dispersion interactions with the surface, may modify the surface acidity scale, in agreement with previous experimental and theoretical work on Au(111).

  14. Image inpainting by patch propagation using patch sparsity.

    PubMed

    Xu, Zongben; Sun, Jian

    2010-05-01

    This paper introduces a novel examplar-based inpainting algorithm through investigating the sparsity of natural image patches. Two novel concepts of sparsity at the patch level are proposed for modeling the patch priority and patch representation, which are two crucial steps for patch propagation in the examplar-based inpainting approach. First, patch structure sparsity is designed to measure the confidence of a patch located at the image structure (e.g., the edge or corner) by the sparseness of its nonzero similarities to the neighboring patches. The patch with larger structure sparsity will be assigned higher priority for further inpainting. Second, it is assumed that the patch to be filled can be represented by the sparse linear combination of candidate patches under the local patch consistency constraint in a framework of sparse representation. Compared with the traditional examplar-based inpainting approach, structure sparsity enables better discrimination of structure and texture, and the patch sparse representation forces the newly inpainted regions to be sharp and consistent with the surrounding textures. Experiments on synthetic and natural images show the advantages of the proposed approach. PMID:20129864

  15. An Algorithm for Projecting Points onto a Patched CAD Model

    SciTech Connect

    Henshaw, W D

    2001-05-29

    We are interested in building structured overlapping grids for geometries defined by computer-aided-design (CAD) packages. Geometric information defining the boundary surfaces of a computation domain is often provided in the form of a collection of possibly hundreds of trimmed patches. The first step in building an overlapping volume grid on such a geometry is to build overlapping surface grids. A surface grid is typically built using hyperbolic grid generation; starting from a curve on the surface, a grid is grown by marching over the surface. A given hyperbolic grid will typically cover many of the underlying CAD surface patches. The fundamental operation needed for building surface grids is that of projecting a point in space onto the closest point on the CAD surface. We describe an fast algorithm for performing this projection, it will make use of a fairly coarse global triangulation of the CAD geometry. We describe how to build this global triangulation by first determining the connectivity of the CAD surface patches. This step is necessary since it often the case that the CAD description will contain no information specifying how a given patch connects to other neighboring patches. Determining the connectivity is difficult since the surface patches may contain mistakes such as gaps or overlaps between neighboring patches.

  16. Nitroglycerin Transdermal Patch

    MedlinePlus

    ... verapamil (Calan, Isoptin); ergot-type medications such as bromocriptine (Parlodel), cabergoline, dihydroergotamine (D.H.E. 45, Migranal), ... at any time, especially if you have been drinking alcoholic beverages. To ... during your treatment with nitroglycerin patches.you should know that you ...

  17. Acid Cleavable Surface enhanced Raman Tagging for Protein Detection

    PubMed Central

    Zhang, Dongmao; Vangala, Karthikeshwar; Li, Shaoyong; Yanney, Michael; Xia, Hao; Zou, Sige; Sygula, Andrzej

    2010-01-01

    Dye conjugation is a common strategy improving the surface enhanced Raman detection sensitivity of biomolecules. Reported is a proof-of-concept study of a novel surface enhanced Raman spectroscopic tagging strategy termed as acid-cleavable SERS tag (ACST) method. Using Rhodamine B as the starting material, we prepared the first ACST prototype that consisted of, from the distal end, a SERS tag moiety (STM), an acid-cleavable linker, and a protein reactive moiety. Complete acid cleavage of the ACST tags was achieved at a very mild condition that is 1.5% trifluoroacetic acid (TFA) aqueous solution at room temperature. SERS detection of this ACST tagged protein was demonstrated using bovine serum albumin (BSA) as the model protein. While the SERS spectrum of intact ACST-BSA was entirely dominated by the fluorescent signal of STM, quality SERS spectra can be readily obtained with the acid cleaved ACST-BSA conjugates. Separation of the acid cleaved STM from protein further enhances the SERS sensitivity. Current SERS detection sensitivity, achieved with the acid cleaved ACST-BSA conjugate is ~5 nM in terms of the BSA concentration and ~1.5 nM in ACST content. The linear dynamic range of the cleaved ACST-BSA conjugate spans four orders of magnitudes from ~10 nM to ~100 μM in protein concentrations. Further improvement in the SERS sensitivity can be achieved with resonance Raman acquisition. This cleavable tagging strategy may also be used for elimination of protein interference in fluorescence based biomolecule detection. PMID:21109888

  18. The radiolysis and radioracemization of amino acids on silica surfaces

    NASA Technical Reports Server (NTRS)

    Bonner, W. A.; Lemmon, R. M.

    1981-01-01

    Results are presented of experiments on the radioracemization of amino acids in the presence of silica surfaces such as may have been found on the prebiotic earth. L-leucine and a DL-leucine mixture deposited on samples of 1-quartz and an amorphous silica preparation (Syloid 63) was subjected to Co-60 gamma-ray irradiation, then analyzed by gas chromatography to determine the radiolysis and racemization rates. The quartz surface is found to have a marginal efficacy in enhancing radiolysis when compared with a crystalline L-leucine control, although enhancing radioracemization symmetrically by a factor of two. Both the radiolysis and radioracemization of L-leucine and DL-leucine on a Syloid-63 silica surface are observed to increase with increasing radiation dose, and to be substantially greater than in the crystalline controls. Additional experiments with the nonprotein amino acid isovaline deposited on Syloid 63 confirm the greater radiolysis susceptibility of amino acids deposited on silica with respect to the crystalline state, although racemization is not observed. The observations suggest that the presence of a silica surface would have a deleterious effect on any mechanism for the origin of molecular chirality relying on stereoselective beta-radiolysis.

  19. ERTS-1 anomalous dark patches

    NASA Technical Reports Server (NTRS)

    Strong, A. E. (Principal Investigator)

    1973-01-01

    The author has identified the following significant results. Through combined use of imagery from ERTS-1 and NOAA-2 satellites was found that when the sun elevation exceeds 55 degrees, the ERTS-1 imagery is subject to considerable contamination by sunlight even though the actual specular point is nearly 300 nautical miles from nadir. Based on sea surface wave slope information, a wind speed of 10 knots will theoretically provide approximately 0.5 percent incident solar reflectance under observed ERTS multispectral scanner detectors. This reflectance nearly doubles under the influence of a 20 knot wind. The most pronounced effect occurs in areas of calm water where anomalous dark patches are observed. Calm water at distances from the specular point found in ERTS scenes will reflect no solar energy to the multispectral scanner, making these regions stand out as dark areas in all bands in an ocean scene otherwise comprosed by a general diffuse sunlight from rougher ocean surfaces. Anomalous dark patches in the outer parts of the glitter zones may explain the unusual appearance of some scenes.

  20. Gradual surface degradation of restorative materials by acidic agents.

    PubMed

    Hengtrakool, Chanothai; Kukiattrakoon, Boonlert; Kedjarune-Leggat, Ureporn

    2011-01-01

    The aim of this study was to investigate the effect of acidic agents on surface roughness and characteristics of four restorative materials. Fifty-two discs were created from each restorative material: metal-reinforced glass ionomer cement (Ketac-S), resin-modified glass ionomer cement (Fuji II LC), resin composite (Filtek Z250), and amalgam (Valiant-PhD); each disc was 12 mm in diameter and 2.5 mm thick. The specimens were divided into four subgroups (n=13) and immersed for 168 hours in four storage media: deionized water (control); citrate buffer solution; green mango juice; and pineapple juice. Surface roughness measurements were performed with a profilometer, both before and after storage media immersion. Surface characteristics were examined using scanning electron microscopy (SEM). Statistical significance among each group was analyzed using two-way repeated ANOVA and Tukey's tests. Ketac-S demonstrated the highest roughness changes after immersion in acidic agents (p<0.05), followed by Fuji II LC. Valiant-PhD and Filtek Z250 illustrated some minor changes over 168 hours. The mango juice produced the greatest degradation effect of all materials tested (p<0.05). SEM photographs demonstrated gradual surface changes of all materials tested after immersions. Of the materials evaluated, amalgam and resin composite may be the most suitable for restorations for patients with tooth surface loss. PMID:21903509

  1. Determination of surface-accessible acidic hydroxyls and surface area of lignin by cationic dye adsorption.

    PubMed

    Sipponen, Mika Henrikki; Pihlajaniemi, Ville; Littunen, Kuisma; Pastinen, Ossi; Laakso, Simo

    2014-10-01

    A new colorimetric method for determining the surface-accessible acidic lignin hydroxyl groups in lignocellulose solid fractions was developed. The method is based on selective adsorption of Azure B, a basic dye, onto acidic hydroxyl groups of lignin. Selectivity of adsorption of Azure B on lignin was demonstrated using lignin and cellulose materials as adsorbents. Adsorption isotherms of Azure B on wheat straw (WS), sugarcane bagasse (SGB), oat husk, and isolated lignin materials were determined. The maximum adsorption capacities predicted by the Langmuir isotherms were used to calculate the amounts of surface-accessible acidic hydroxyl groups. WS contained 1.7-times more acidic hydroxyls (0.21 mmol/g) and higher surface area of lignin (84 m(2)/g) than SGB or oat husk materials. Equations for determining the amount of surface-accessible acidic hydroxyls in solid fractions of the three plant materials by a single point measurement were developed. A method for high-throughput characterization of lignocellulosic materials is now available. PMID:25033327

  2. Mitigation of acid deposition: Liming of surface waters. Final report

    SciTech Connect

    Bartoshesky, J.; Price, R.; DeMuro, J.

    1989-05-01

    In recent years acid deposition has become a serious concern internationally. Scientific literature has documented the acidification of numerous lakes and streams in North America and Scandinavia resulting in the depletion or total loss of fisheries and other aquatic biota. Liming represents the only common corrective practice aimed specifically at remediating an affected acid receptor. This report reviews a range of liming technologies and liming materials, as well as the effect of surface-water liming on water quality and aquatic biota. As background to the liming discussion, the hydrologic cycle and the factors that make surface waters sensitive to acid deposition are also discussed. Finally, a brief review of some of the liming projects that have been conducted, or are currently in operation is presented, giving special emphasis to mitigation efforts in Maryland. Liming has been effectively used to counteract surface-water acidification in parts of Scandinavia, Canada, and the U.S. To date, liming has generally been shown to improve physical and chemical conditions and enhance the biological recovery of aquatic ecosystems affected by acidification.

  3. [Patch testing: historical aspects].

    PubMed

    Lachapelle, J-M

    2009-01-01

    This article reviews the key points in the history of patch testing, which spans more than a century, starting with the first description of the method by J. Jadassohn in 1895. Special attention is paid to the contribution of French schools in this field, which led to the foundation of the Groupe d'études et de recherches en dermato-allergologie (GERDA). PMID:19686889

  4. Polymer concrete patching manual

    NASA Astrophysics Data System (ADS)

    Fontana, J. J.; Bartholomew, J.

    1982-06-01

    The practicality of using polymer concrete to repair deteriorated portland cement concrete bridge decks and pavements was demonstrated. This manual outlines the procedures for using polymer concrete as a rapid patching material to repair deteriorated concrete. The process technology, materials, equipment, and safety provisions used in manufacturing and placing polymer concrete are discussed. Potential users are informed of the various steps necessary to insure successful field applications of the material.

  5. Growing vortex patches

    NASA Astrophysics Data System (ADS)

    Crowdy, Darren; Marshall, Jonathan

    2004-08-01

    This paper demonstrates that two well-known equilibrium solutions of the Euler equations—the corotating point vortex pair and the Rankine vortex—are connected by a continuous branch of exact solutions. The central idea is to "grow" new vortex patches at two stagnation points that exist in the frame of reference of the corotating point vortex pair. This is done by generalizing a mathematical technique for constructing vortex equilibria first presented by Crowdy [D. G. Crowdy, "A class of exact multipolar vortices," Phys. Fluids 11, 2556 (1999)]. The solutions exhibit several interesting features, including the merging of two separate vortex patches via the development of touching cusps. Numerical contour dynamics methods are used to verify the mathematical solutions and reveal them to be robust structures. The general issue of how simple vortex equilibria can be continued continuously to more complicated ones with very different vortical topologies is discussed. The solutions are examples of exact solutions of the Euler equations involving multiple interacting vortex patches.

  6. Interactions of aminomethylphosphonic acid and sarcosine with montmorillonite interlayer surfaces

    NASA Astrophysics Data System (ADS)

    Rennig, Amanda; Slutter, Annette; Tribe, Lorena

    The smectite clay, montmorillonite, can be found in many soils throughout the world. In addition to its importance in agriculture and soil remediation, montmorillonite has extensive applications in industry both in its natural form and as a component of composite materials. The adsorptive properties of montmorillonite have been explored in relation to its interactions with the common herbicide glyphosate. This herbicide, when exposed to microorganisms in the soil is degraded, forming two products: aminomethylphosphonic acid (AMPA) and sarcosine. The atomic-level interactions of these compounds with the montmorillonite interlayer surfaces are studied here using molecular mechanics. The final outcomes of these calculations are analyzed in terms of the proximity of the montmorillonite surface to the moieties of the degradation products. The phosphonate moiety was found to be the most important source of interactions for AMPA, while for sarcosine there was an even distribution between the amino and carboxylic moieties, and Na+ ion mediated surface complexes.0

  7. Con-Patch: When a Patch Meets Its Context.

    PubMed

    Romano, Yaniv; Elad, Michael

    2016-09-01

    Measuring the similarity between the patches in images is a fundamental building block in various tasks. Naturally, the patch size has a major impact on the matching quality and on the consequent application performance. Under the assumption that our patch database is sufficiently sampled, using large patches (e.g., 21 × 21 ) should be preferred over small ones (e.g., 7 × 7 ). However, this dense-sampling assumption is rarely true; in most cases, large patches cannot find relevant nearby examples. This phenomenon is a consequence of the curse of dimensionality, stating that the database size should grow exponentially with the patch size to ensure proper matches. This explains the favored choice of small patch size in most applications. Is there a way to keep the simplicity and work with small patches while getting some of the benefits that large patches provide? In this paper, we offer such an approach. We propose to concatenate the regular content of a conventional (small) patch with a compact representation of its (large) surroundings-its context. Therefore, with a minor increase of the dimensions (e.g., with additional ten values to the patch representation), we implicitly/softly describe the information of a large patch. The additional descriptors are computed based on a self-similarity behavior of the patch surrounding. We show that this approach achieves better matches, compared with the use of conventional-size patches, without the need to increase the database-size. Also, the effectiveness of the proposed method is tested on three distinct problems: 1) external natural image denoising; 2) depth image super-resolution; and 3) motion-compensated frame-rate up conversion. PMID:27295669

  8. Con-Patch: When a Patch Meets Its Context

    NASA Astrophysics Data System (ADS)

    Romano, Yaniv; Elad, Michael

    2016-09-01

    Measuring the similarity between patches in images is a fundamental building block in various tasks. Naturally, the patch-size has a major impact on the matching quality, and on the consequent application performance. Under the assumption that our patch database is sufficiently sampled, using large patches (e.g. 21-by-21) should be preferred over small ones (e.g. 7-by-7). However, this "dense-sampling" assumption is rarely true; in most cases large patches cannot find relevant nearby examples. This phenomenon is a consequence of the curse of dimensionality, stating that the database-size should grow exponentially with the patch-size to ensure proper matches. This explains the favored choice of small patch-size in most applications. Is there a way to keep the simplicity and work with small patches while getting some of the benefits that large patches provide? In this work we offer such an approach. We propose to concatenate the regular content of a conventional (small) patch with a compact representation of its (large) surroundings - its context. Therefore, with a minor increase of the dimensions (e.g. with additional 10 values to the patch representation), we implicitly/softly describe the information of a large patch. The additional descriptors are computed based on a self-similarity behavior of the patch surrounding. We show that this approach achieves better matches, compared to the use of conventional-size patches, without the need to increase the database-size. Also, the effectiveness of the proposed method is tested on three distinct problems: (i) External natural image denoising, (ii) Depth image super-resolution, and (iii) Motion-compensated frame-rate up-conversion.

  9. Surface profile changes of scuffed bearing surfaces. [before and after acid treatment

    NASA Technical Reports Server (NTRS)

    Lauer, J. L.; Fung, S. S.; Jones, W. R., Jr.

    1982-01-01

    A phase locked interference microscope capable of resolving depth differences to 30 A and planar displacements of 6000 A was constructed for the examination of the profiles of bearing surfaces without physical contact. This instrument was used to determine surface chemical reactivity by applying a drop of dilute alcoholic hydrochloric acid and measuring the profile of the solid surface before and after application of this probe. Scuffed bearing surfaces reacted much faster than unscuffed ones, but bearing surfaces which had been previously exposed to lubricants containing an organic chloride reacted much more slowly. In a separate series of experiments, a number of stainless steel plates were heated in a nitrogen atmosphere to different temperatures and their reactivity examined later at room temperature. The change of surface contour as a result of the probe reaction followed an Arrhenius type relation with respect to heat treatment temperature. This result could have implications on the scuffing mechanism.

  10. The effect of humic acid adsorption on pH-dependent surface charging and aggregation of magnetite nanoparticles

    SciTech Connect

    Illes, E.; Tombacz, E.

    2006-03-01

    The pH-dependent adsorption of humic acid (HA) on magnetite and its effect on the surface charging and the aggregation of oxide particles were investigated. HA was extracted from brown coal. Synthetic magnetite was prepared by alkaline hydrolysis of iron(II) and iron(III) salts. The pH-dependent particle charge and aggregation, and coagulation kinetics at pH around to 4 were measured by laser Doppler electrophoresis and dynamic light scattering. The charge of pure magnetite reverses from positive to negative at pH around 8, which may consider as isoelectric point (IEP). Near this pH, large aggregates form, while stable sols exist further from it. In the presence of increasing HA loading, the IEP shifts to lower pH, then at higher loading, magnetite becomes negatively charged even at low pHs, which indicate the neutralization and gradual recharging positive charges on surface. In acidic region, the trace HA amounts are adsorbed on magnetite surface as oppositely charged patches, systems become highly unstable due to heterocoagulation. Above the adsorption saturation, however, the nanoparticles are stabilized in a way of combined steric and electrostatic effects. The HA coated magnetite particles form stable colloidal dispersion, particle aggregation does not occur in a wide range of pH and salt tolerance is enhanced.

  11. Adsorption of naphthenic acids on high surface area activated carbons.

    PubMed

    Iranmanesh, Sobhan; Harding, Thomas; Abedi, Jalal; Seyedeyn-Azad, Fakhry; Layzell, David B

    2014-01-01

    In oil sands mining extraction, water is an essential component; however, the processed water becomes contaminated through contact with the bitumen at high temperature, and a portion of it cannot be recycled and ends up in tailing ponds. The removal of naphthenic acids (NAs) from tailing pond water is crucial, as they are corrosive and toxic and provide a substrate for microbial activity that can give rise to methane, which is a potent greenhouse gas. In this study, the conversion of sawdust into an activated carbon (AC) that could be used to remove NAs from tailings water was studied. After producing biochar from sawdust by a slow-pyrolysis process, the biochar was physically activated using carbon dioxide (CO2) over a range of temperatures or prior to producing biochar, and the sawdust was chemically activated using phosphoric acid (H3PO4). The physically activated carbon had a lower surface area per gram than the chemically activated carbon. The physically produced ACs had a lower surface area per gram than chemically produced AC. In the adsorption tests with NAs, up to 35 mg of NAs was removed from the water per gram of AC. The chemically treated ACs showed better uptake, which can be attributed to its higher surface area and increased mesopore size when compared with the physically treated AC. Both the chemically produced and physically produced AC provided better uptake than the commercially AC. PMID:24766592

  12. Acid-base properties of aqueous illite surfaces

    SciTech Connect

    Du, Q.; Sun, Z.; Forsling, W.; Tang, H.

    1997-03-01

    In this paper, the acid-base properties of illite/water suspensions are examined using the constant capacitance surface complexation model. On the basis of results of potentiometric titrations and solubility experiments, the authors conclude that the proton reactions in the supernatants of illite suspensions can be successfully represented by proton reactions of Al(H{sub 2}O){sub 6}{sup 3+} and Si(OH){sub 4} in water solutions. For illustrating the acidic characteristics of aqueous illite surfaces, two surface protonation models are proposed: (1) one site-one pK{sub a} model, {triple_bond}SOH {r_reversible} {triple_bond}SO{sup {minus}} + H{sup +}, pK{sub a}{sup int} = 4.12-4.23; (2) two sites-two pK{sub a}s model, {triple_bond}S{sub 1}OH {r_reversible} {triple_bond}S{sup 1}O{sup {minus}} + H{sup +}, pK{sub a{sub I}} = 4.17-4.44, and {triple_bond}S{sub II}OH {r_reversible} {triple_bond}S{sub II}O{sup {minus}} + H{sup +}, pK{sub a{sub II}}{sup int} = 6.35-7.74. Evaluation of these two models indicates that both of them can give good descriptions of the experimental data of systems with different illite concentrations and ionic strengths and that the one site-one pK{sub a} model can be considered as a simplification of the two sites-two pK{sub a}s model. Since both models assume only deprotonation reactions at the illite surfaces, they suggest that the surface behavior of the illite is similar to that of amorphous SiO{sub 2}. Model assumptions, experimental procedures, and evaluative criteria are detailed in the paper.

  13. Patch antenna terahertz photodetectors

    SciTech Connect

    Palaferri, D.; Todorov, Y. Chen, Y. N.; Madeo, J.; Vasanelli, A.; Sirtori, C.; Li, L. H.; Davies, A. G.; Linfield, E. H.

    2015-04-20

    We report on the implementation of 5 THz quantum well photodetector exploiting a patch antenna cavity array. The benefit of our plasmonic architecture on the detector performance is assessed by comparing it with detectors made using the same quantum well absorbing region, but processed into a standard 45° polished facet mesa. Our results demonstrate a clear improvement in responsivity, polarization insensitivity, and background limited performance. Peak detectivities in excess of 5 × 10{sup 12} cmHz{sup 1/2}/W have been obtained, a value comparable with that of the best cryogenic cooled bolometers.

  14. The Radiolysis and Radioracemization of Amino Acids on Silica Surfaces

    NASA Astrophysics Data System (ADS)

    Bonner, William A.; Lemmon, Richard M.

    1981-12-01

    L-Leucine, deposited on both 1-quartz powder and on a commercial amorphous silica preparation (Syloid 63), has been subjected to irradiation in a60Co γ-ray source, and the ensuing radiolysis and radioracemization have been determined gas chromatographically. The radiolysis and radioracemization observed for leucine on 1-quartz were rather similar to those noted for a crystalline L-leucine control. L-Leucine on Syloid 63, however, was vastly more susceptible to radiolysis as compared to the L-leucine control, and radioracemization was also markedly enhanced—each increasing with larger radiation dosage. L-Isovaline showed a similar, but diminished, enhancement of radiolysis sensitivity when adsorbed on the Syloid surface, but underwent no radioracemization whatsoever. The divergent results of the control and quartz-leucine irradiationsversus the Syloid-leucine and Syloid-isovaline irradiations are interpreted qualitatively in terms of the surface area parameters of the two silica adsorbents and the amino acid adsorbates.

  15. Oxygen plasma surface modification enhances immobilization of simvastatin acid.

    PubMed

    Yoshinari, Masao; Hayakawa, Tohru; Matsuzaka, Kenichi; Inoue, Takashi; Oda, Yutaka; Shimono, Masaki; Ide, Takaharu; Tanaka, Teruo

    2006-02-01

    Simvastatin acid (SVA) has been reported to stimulate bone formation with increased expression of BMP-2. Therefore, immobilization of SVA onto dental implants is expected to promote osteogenesis at the bone tissue/implant interface. The aim of this study was to evaluate the immobilization behavior of SVA onto titanium (Ti), O(2)-plasma treated titanium (Ti + O(2)), thin-film coatings of hexamethyldisiloxane (HMDSO), and O(2)-plasma treated HMDSO (HMDSO + O(2)) by using the quartz crystal microbalance-dissipation (QCM-D) technique. HMDSO surfaces were activated by the introduction of an OH group and/or O(2)-functional groups by O(2)-plasma treatment. In contrast, titanium surfaces showed no appreciable compositional changes by O(2)-plasma treatment. The QCM-D technique enabled evaluation even at the adsorption behavior of a substance with a low molecular weight such as simvastatin. The largest amount of SVA was adsorbed on O(2)-plasma treated HMDSO surfaces compared to untreated titanium, HMDSO-coated titanium, and O(2)-plasma treated titanium. These findings suggested that the adsorption of SVA was enhanced on more hydrophilic surfaces concomitant with the presence of an OH group and/or O(2)-functional group resulting from the O(2)-plasma treatment, and that an organic film of HMDSO followed by O(2)-plasma treatment is a promising method for the adsorption of SVA in dental implant systems. PMID:16543663

  16. Laboratory measurements of heterogeneous reactions on sulfuric acid surfaces

    NASA Technical Reports Server (NTRS)

    Williams, Leah R.; Manion, Jeffrey A.; Golden, David M.; Tolbert, Margaret A.

    1994-01-01

    Increasing evidence from field, modeling, and laboratory studies suggests that heterogeneous reactions on stratospheric sulfate aerosol particles may contribute to global ozone depletion. Using a Knudsen cell reactor technique, the authors have studied the uptake, reactivity, and solubility of several trace atmospheric species on cold sulfuric acid surfaces representative of stratospheric aerosol particles. The results suggest that the heterogeneous conversion of N2O5 to HNO3 is fast enough to significantly affect the partitioning of nitrogen species in the global stratosphere and thus contribute to global ozone depletion. The hydrolysis of ClONO2 is slower and unlikely to be important under normal conditions at midlatitudes. The solubilities of HCl and HNO3 in sulfuric acid down to 200 K were found to be quite low. For HCl, this means that little HCl is available for reaction on the surfaces of stratospheric sulfate aerosol particles. The low solubility of HNO3 means that this product of heterogeneous reactions will enter the gas phase, and the denitrification observed in polar regions is unlikely to occur in the global stratosphere.

  17. Patterned biofunctional poly(acrylic acid) brushes on silicon surfaces.

    PubMed

    Dong, Rong; Krishnan, Sitaraman; Baird, Barbara A; Lindau, Manfred; Ober, Christopher K

    2007-10-01

    Protein patterning was carried out using a simple procedure based on photolithography wherein the protein was not subjected to UV irradiation and high temperatures or contacted with denaturing solvents or strongly acidic or basic solutions. Self-assembled monolayers of poly(ethylene glycol) (PEG) on silicon surfaces were exposed to oxygen plasma through a patterned photoresist. The etched regions were back-filled with an initiator for surface-initiated atom transfer radical polymerization (ATRP). ATRP of sodium acrylate was readily achieved at room temperature in an aqueous medium. Protonation of the polymer resulted in patterned poly(acrylic acid) (PAA) brushes. A variety of biomolecules containing amino groups could be covalently tethered to the dense carboxyl groups of the brush, under relatively mild conditions. The PEG regions surrounding the PAA brush greatly reduced nonspecific adsorption. Avidin was covalently attached to PAA brushes, and biotin-tagged proteins could be immobilized through avidin-biotin interaction. Such an immobilization method, which is based on specific interactions, is expected to better retain protein functionality than direct covalent binding. Using biotin-tagged bovine serum albumin (BSA) as a model, a simple strategy was developed for immobilization of small biological molecules using BSA as linkages, while BSA can simultaneously block nonspecific interactions. PMID:17880179

  18. Statistics for Patch Observations

    NASA Astrophysics Data System (ADS)

    Hingee, K. L.

    2016-06-01

    In the application of remote sensing it is common to investigate processes that generate patches of material. This is especially true when using categorical land cover or land use maps. Here we view some existing tools, landscape pattern indices (LPI), as non-parametric estimators of random closed sets (RACS). This RACS framework enables LPIs to be studied rigorously. A RACS is any random process that generates a closed set, which encompasses any processes that result in binary (two-class) land cover maps. RACS theory, and methods in the underlying field of stochastic geometry, are particularly well suited to high-resolution remote sensing where objects extend across tens of pixels, and the shapes and orientations of patches are symptomatic of underlying processes. For some LPI this field already contains variance information and border correction techniques. After introducing RACS theory we discuss the core area LPI in detail. It is closely related to the spherical contact distribution leading to conditional variants, a new version of contagion, variance information and multiple border-corrected estimators. We demonstrate some of these findings on high resolution tree canopy data.

  19. Tiling Motion Patches.

    PubMed

    Hyun, Kyunglyul; Kim, Manmyung; Hwang, Youngseok; Lee, Jehee

    2013-05-01

    Simulating multiple character interaction is challenging because character actions must be carefully coordinated to align their spatial locations and synchronized with each other. We present an algorithm to create a dense crowd of virtual characters interacting with each other. The interaction may involve physical contacts, such as hand shaking, hugging, and carrying a heavy object collaboratively. We address the problem by collecting deformable motion patches, each of which describes an episode of multiple interacting characters, and tiling them spatially and temporally. The tiling of motion patches generates a seamless simulation of virtual characters interacting with each other in a non-trivial manner. Our tiling algorithm uses a combination of stochastic sampling and deterministic search to address the discrete and continuous aspects of the tiling problem. Our tiling algorithm made it possible to automatically generate highly-complex animation of multiple interacting characters. We achieved the level of complexity far beyond the current state-of-the-art animation techniques could generate, in terms of the diversity of human behaviors and the spatial/temporal density of interpersonal interactions. PMID:23669532

  20. Tiling motion patches.

    PubMed

    Hyun, Kyunglyul; Kim, Manmyung; Hwang, Youngseok; Lee, Jehee

    2013-11-01

    Simulating multiple character interaction is challenging because character actions must be carefully coordinated to align their spatial locations and synchronized with each other. We present an algorithm to create a dense crowd of virtual characters interacting with each other. The interaction may involve physical contacts, such as hand shaking, hugging, and carrying a heavy object collaboratively. We address the problem by collecting deformable motion patches, each of which describes an episode of multiple interacting characters, and tiling them spatially and temporally. The tiling of motion patches generates a seamless simulation of virtual characters interacting with each other in a nontrivial manner. Our tiling algorithm uses a combination of stochastic sampling and deterministic search to address the discrete and continuous aspects of the tiling problem. Our tiling algorithm made it possible to automatically generate highly complex animation of multiple interacting characters. We achieve the level of interaction complexity far beyond the current state of the art that animation techniques could generate, in terms of the diversity of human behaviors and the spatial/temporal density of interpersonal interactions. PMID:24029911

  1. Patched Conic Trajectory Code

    NASA Technical Reports Server (NTRS)

    Park, Brooke Anderson; Wright, Henry

    2012-01-01

    PatCon code was developed to help mission designers run trade studies on launch and arrival times for any given planet. Initially developed in Fortran, the required inputs included launch date, arrival date, and other orbital parameters of the launch planet and arrival planets at the given dates. These parameters include the position of the planets, the eccentricity, semi-major axes, argument of periapsis, ascending node, and inclination of the planets. With these inputs, a patched conic approximation is used to determine the trajectory. The patched conic approximation divides the planetary mission into three parts: (1) the departure phase, in which the two relevant bodies are Earth and the spacecraft, and where the trajectory is a departure hyperbola with Earth at the focus; (2) the cruise phase, in which the two bodies are the Sun and the spacecraft, and where the trajectory is a transfer ellipse with the Sun at the focus; and (3) the arrival phase, in which the two bodies are the target planet and the spacecraft, where the trajectory is an arrival hyperbola with the planet as the focus.

  2. Surface oxide growth on platinum electrode in aqueous trifluoromethanesulfonic acid.

    PubMed

    Furuya, Yoshihisa; Mashio, Tetsuya; Ohma, Atsushi; Dale, Nilesh; Oshihara, Kenzo; Jerkiewicz, Gregory

    2014-10-28

    Platinum in the form of nanoparticles is the key and most expensive component of polymer electrolyte membrane fuel cells, while trifluoromethanesulfonic acid (CF3SO3H) is the smallest fluorinated sulfonic acid. Nafion, which acts as both electrolyte and separator in fuel cells, contains -CF2SO3H groups. Consequently, research on the electrochemical behaviour of Pt in aqueous CF3SO3H solutions creates important background knowledge that can benefit fuel cell development. In this contribution, Pt electro-oxidation is studied in 0.1 M aqueous CF3SO3H as a function of the polarization potential (E(p), 1.10 ≤ E(p) ≤ 1.50 V), polarization time (t(p), 10(0) ≤ t(p) ≤ 10(4) s), and temperature (T, 278 ≤ T ≤ 333 K). The critical thicknesses (X1), which determines the applicability of oxide growth theories, is determined and related to the oxide thickness (d(ox)). Because X1 > d(ox) for the entire range of E(p), t(p), and T values, the formation of Pt surface oxide follows the interfacial place-exchange or the metal cation escape mechanism. The mechanism of Pt electro-oxidation is revised and expanded by taking into account possible interactions of cations, anions, and water molecules with Pt. A modified kinetic equation for the interfacial place exchange is proposed. The application of the interfacial place-exchange and metal cation escape mechanisms leads to an estimation of the Pt(δ+)-O(δ-) surface dipole (μ(PtO)), and the potential drop (V(ox)) and electric field (E(ox)) within the oxide. The Pt-anion interactions affect the oxidation kinetics by indirectly influencing the electric field within the double layer and the surface oxide. PMID:25362330

  3. Surface oxide growth on platinum electrode in aqueous trifluoromethanesulfonic acid

    NASA Astrophysics Data System (ADS)

    Furuya, Yoshihisa; Mashio, Tetsuya; Ohma, Atsushi; Dale, Nilesh; Oshihara, Kenzo; Jerkiewicz, Gregory

    2014-10-01

    Platinum in the form of nanoparticles is the key and most expensive component of polymer electrolyte membrane fuel cells, while trifluoromethanesulfonic acid (CF3SO3H) is the smallest fluorinated sulfonic acid. Nafion, which acts as both electrolyte and separator in fuel cells, contains -CF2SO3H groups. Consequently, research on the electrochemical behaviour of Pt in aqueous CF3SO3H solutions creates important background knowledge that can benefit fuel cell development. In this contribution, Pt electro-oxidation is studied in 0.1 M aqueous CF3SO3H as a function of the polarization potential (Ep, 1.10 ≤ Ep ≤ 1.50 V), polarization time (tp, 100 ≤ tp ≤ 104 s), and temperature (T, 278 ≤ T ≤ 333 K). The critical thicknesses (X1), which determines the applicability of oxide growth theories, is determined and related to the oxide thickness (dox). Because X1 > dox for the entire range of Ep, tp, and T values, the formation of Pt surface oxide follows the interfacial place-exchange or the metal cation escape mechanism. The mechanism of Pt electro-oxidation is revised and expanded by taking into account possible interactions of cations, anions, and water molecules with Pt. A modified kinetic equation for the interfacial place exchange is proposed. The application of the interfacial place-exchange and metal cation escape mechanisms leads to an estimation of the Ptδ+-Oδ- surface dipole (μPtO), and the potential drop (Vox) and electric field (Eox) within the oxide. The Pt-anion interactions affect the oxidation kinetics by indirectly influencing the electric field within the double layer and the surface oxide.

  4. Characterization of water dissolved organic matter under woody vegetation patches in semi-arid Mediterranean soils.

    PubMed

    Cerdán, M; Sánchez-Sánchez, A; Jordá, J D; Amat, B; Cortina, J; Ruiz-Vicedo, N; El-Khattabi, M

    2016-05-15

    Woody patches in semiarid environments favor the establishment of other plants. Facilitation may be favored by an increase in soil fertility. Dissolved organic matter (DOM), is the most active fraction of soil organic matter and may contain compounds affecting plant establishment, as allelochemicals, hormone-like substances and metal carriers. However, information on DOM contents and composition in these environments is scarce. In this paper, we study the impact of woody patches on DOM in Stipa tenacissima L. steppes and discuss its implications for community dynamics. DOM under patch- and inter-patch areas, was analyzed for elemental composition, UV-Vis indices and organic acid content. Element concentration and composition in DOM, and organic acid concentration were similar in patch- and inter-patch areas. Yet, soils under patches were richer in DOC, aromatic species and organic acids (particularly fumaric acid) than soils in inter-patch areas. Dominant species affected organic matter concentration and quality in complex ways. Thus, patches dominated by Ephedra fragilis showed higher concentrations of TOC and aromatics than those dominated by other species. Rhamnus lycioides patches showed the highest accumulation of fumaric acid, which may contribute to its successful recruitment rate and expansion in the area. Our results show substantial differences in the amount and composition of DOM and specific compounds affecting soil functionality and plant dynamics. Further studies on the effects of such changes on seedling performance are needed to increase our understanding of plant-plant interactions in semiarid environments. PMID:26930307

  5. Bright patches on Ariel

    NASA Technical Reports Server (NTRS)

    1986-01-01

    Distinct bright patches are visible on Ariel, the brightest of Uranus' five largest satellites. Voyager 2 obtained this image Jan. 22, 1986, from a distance of 2.52 million kilometers (1.56 million miles). The clear-filter image, obtained with the narrow-angle camera, shows a resolution of 47 km (29 miles). Ariel is about 1,300 km (800 mi) in diameter. This image shows several distinct bright areas that reflect nearly 45 percent of the incident sunlight; on average, the satellite displays a reflectivity of about 25-30 percent. The bright areas are probably fresh water ice, perhaps excavated by impacts. The south pole of Ariel is slightly off center of the disk in this view. Voyager 2 will obtain its best views of the satellite on Jan. 24, at a closest-approach distance of 127,000 km (79,000 mi). The Voyager project is managed for NASA by the Jet Propulsion Laboratory.

  6. Granuloma annulare, patch type.

    PubMed

    Victor, Frank C; Mengden, Stephanie

    2008-01-01

    A 64-year-old man was referred to the Bellevue Hospital Center Dermatology Clinic for evaluation of an asymptomatic eruption on his left inner arm, which had been present for 4 months and was unresponsive to topical anti-fungal therapy. One month after the initial eruption, 2 similar, asymptomatic lesions appeared on the right inner arm. The lesions were slowly expanding. A biopsy specimen from the left medial arm was consistent with interstitial granuloma annulare. The patient's clinical presentation was consistent with patch-type granuloma annulare. He was treated with a mid-potency topical glucocorticoid twice daily for 4 weeks without benefit. Since the eruption was asymptomatic, treatment was discontinued. PMID:18627757

  7. Analytical theory of an unloaded rectangular microstrip patch

    NASA Astrophysics Data System (ADS)

    Chang, D. C.

    1981-01-01

    A graphical method for determining the size of a resonant rectangular microstrip patch for a specified frequency is given. Using an expression obtained from the reflection coefficient of a transverse electromagnetic (TEM) wave in a semi-infinite microstrip patch, the resonance condition of a given mode for a patch of finite size is derived in a manner analogous to that of a rectangular, waveguide cavity. Radiation is shown to be in the form of both surface waves and space waves and is dependent on the angles of incidence for waves impinging onto the edges of the patch. By varying the aspect ratio, it is also possible to modify the Q factor of a resonant path. Analytical expressions for the resonant frequency and the Q factor are then derived under the assumption of a very thin substrate slab, encountered frequently in the application. Design curves in the form of the 'Argand diagram' are then presented for microstrip patches with fixed aspect ratios.

  8. Microstrip patch antenna receiving array operating in the Ku band

    NASA Technical Reports Server (NTRS)

    Walcher, Douglas A.

    1996-01-01

    Microstrip patch antennas were first investigated from the idea that it would be highly advantageous to fabricate radiating elements (antennas) on the same dielectric substrate as RF circuitry and transmission lines. Other advantages were soon discovered to be its lightweight, low profile, conformability to shaped surfaces, and low manufacturing costs. Unfortunately, these same patches continually exhibit narrow bandwidths, wide beamwidths, and low antenna gain. This thesis will present the design and experimental results of a microstrip patch antenna receiving array operating in the Ku band. An antenna array will be designed in an attempt to improve its performance over a single patch. Most Ku band information signals are either wide band television images or narrow band data and voice channels. An attempt to improve the gain of the array by introducing parasitic patches on top of the array will also be presented in this thesis.

  9. Soil surface acidity plays a determining role in the atmospheric-terrestrial exchange of nitrous acid

    PubMed Central

    Donaldson, Melissa A.; Bish, David L.; Raff, Jonathan D.

    2014-01-01

    Nitrous acid (HONO) is an important hydroxyl (OH) radical source that is formed on both ground and aerosol surfaces in the well-mixed boundary layer. Recent studies report the release of HONO from nonacidic soils, although it is unclear how soil that is more basic than the pKa of HONO (∼3) is capable of protonating soil nitrite to serve as an atmospheric HONO source. Here, we used a coated-wall flow tube and chemical ionization mass spectrometry (CIMS) to study the pH dependence of HONO uptake onto agricultural soil and model substrates under atmospherically relevant conditions (1 atm and 30% relative humidity). Experiments measuring the evolution of HONO from pH-adjusted surfaces treated with nitrite and potentiometric titrations of the substrates show, to our knowledge for the first time, that surface acidity rather than bulk aqueous pH determines HONO uptake and desorption efficiency on soil, in a process controlled by amphoteric aluminum and iron (hydr)oxides present. The results have important implications for predicting when soil nitrite, whether microbially derived or atmospherically deposited, will act as a net source or sink of atmospheric HONO. This process represents an unrecognized mechanism of HONO release from soil that will contribute to HONO emissions throughout the day. PMID:25512517

  10. Soil surface acidity plays a determining role in the atmospheric-terrestrial exchange of nitrous acid.

    PubMed

    Donaldson, Melissa A; Bish, David L; Raff, Jonathan D

    2014-12-30

    Nitrous acid (HONO) is an important hydroxyl (OH) radical source that is formed on both ground and aerosol surfaces in the well-mixed boundary layer. Recent studies report the release of HONO from nonacidic soils, although it is unclear how soil that is more basic than the pKa of HONO (∼ 3) is capable of protonating soil nitrite to serve as an atmospheric HONO source. Here, we used a coated-wall flow tube and chemical ionization mass spectrometry (CIMS) to study the pH dependence of HONO uptake onto agricultural soil and model substrates under atmospherically relevant conditions (1 atm and 30% relative humidity). Experiments measuring the evolution of HONO from pH-adjusted surfaces treated with nitrite and potentiometric titrations of the substrates show, to our knowledge for the first time, that surface acidity rather than bulk aqueous pH determines HONO uptake and desorption efficiency on soil, in a process controlled by amphoteric aluminum and iron (hydr)oxides present. The results have important implications for predicting when soil nitrite, whether microbially derived or atmospherically deposited, will act as a net source or sink of atmospheric HONO. This process represents an unrecognized mechanism of HONO release from soil that will contribute to HONO emissions throughout the day. PMID:25512517

  11. A Window on Surface Explosions: Tartaric Acid on Cu(110)

    SciTech Connect

    Mhatre, B S; Pushkarev, V; Holsclaw, B; Lawton, T J; Sykes, E C. H.; Gellman, A J

    2013-04-18

    Autocatalytic reaction mechanisms are observed in a range of important chemical processes including catalysis, radical-mediated explosions, and biosynthesis. Because of their complexity, the microscopic details of autocatalytic reaction mechanisms have been difficult to study on surfaces and heterogeneous catalysts. Autocatalytic decomposition reactions of S,S- and R,R-tartaric acid (TA) adsorbed on Cu(110) offer molecular-level insight into aspects of these processes, which until now, were largely a matter of speculation. The decomposition of TA/Cu(110) is initiated by a slow, irreversible process that forms vacancies in the adsorbed TA layer, followed by a vacancy-mediated, explosive decomposition process that yields CO{sub 2} and small hydrocarbon products. Initiation of the explosive decomposition of TA/Cu(110) has been studied by measurement of the reaction kinetics, time-resolved low energy electron diffraction (LEED), and time-resolved scanning tunneling microscopy (STM). Initiation results in a decrease in the local coverage of TA and a concomitant increase in the areal vacancy concentration. Observations of explosive TA decomposition on the Cu(651)S surface suggest that initiation does not occur at structural defects in the surface, as has been suggested in the past. Once the vacancy concentration reaches a critical value, the explosive, autocatalytic decomposition step dominates the TA decomposition rate. The onset of the explosive decomposition of TA on Cu(110) is accompanied by the extraction of Cu atoms from the surface to form a (±6,7; {-+}2,1) overlayer that is readily observable using LEED and STM. The explosive decomposition step is second-order in vacancy concentration and accelerates with increasing extent of reaction.

  12. Stereochemistry of amino acids in surface samples of a marine sediment

    USGS Publications Warehouse

    Pollock, G.E.; Kvenvolden, K.A.

    1978-01-01

    In two surface samples of marine sediment, the percentages of d-alanine and d-aspartic acid are significantly higher than the other d-amino acids and are similar to the range found in soils. The percentage of d-glutamic acid is also higher than the other amino acids but less than d-alanine and d-aspartic acid. These d-amino acids may come mainly from bacteria. ?? 1978.

  13. Stability of patch test allergens.

    PubMed

    Joy, Nicole Marie; Rice, Kristen R; Atwater, Amber Reck

    2013-01-01

    Patch testing is widely used in evaluating suspected contact dermatitis. One major component of a quality patch test result is a dependable, predictable allergen supply. The allergen needs to be present at a sufficient concentration to elicit a reaction in an allergic patient. To better understand the stability of patch-test allergens, we completed a systematic review of the literature. We found that there is variability in stability among patch-test allergens and that although a few have been shown to be stable, many degrade when in storage. In most cases, expiration dates should be honored. In addition, allergen panels should be prepared as close to the time of patch test application as is possible. PMID:24030367

  14. Structure and friction of stearic acid and oleic acid films adsorbed on iron oxide surfaces in squalane.

    PubMed

    Doig, Michael; Warrens, Chris P; Camp, Philip J

    2014-01-14

    The structure and friction of fatty acid surfactant films adsorbed on iron oxide surfaces lubricated by squalane are examined using large-scale molecular dynamics simulations. The structures of stearic acid and oleic acid films under static and shear conditions, and at various surface coverages, are described in detail, and the effects of unsaturation in the tail group are highlighted. At high surface coverage, the measured properties of stearic acid and oleic acid films are seen to be very similar. At low and intermediate surface coverages, the presence of a double bond, as in oleic acid, is seen to give rise to less penetration of lubricant in to the surfactant film and less layering of the lubricant near to the film. The kinetic friction coefficient is measured as a function of shear rate within the hydrodynamic (high shear rate) lubrication regime. Lubricant penetration and layering are observed to be correlated with friction coefficient. The friction coefficient with oleic acid depends only weakly on surface coverage, while stearic acid admits more lubricant penetration, and its friction coefficient increases significantly with decreasing surface coverage. Connections between film structure and friction are discussed. PMID:24364665

  15. Ethinyl Estradiol and Norelgestromin Transdermal Patch

    MedlinePlus

    ... the skin. One patch is applied once a week for 3 weeks, followed by a patch-free week. Follow the directions on your prescription label carefully, ... new patch on the same day of the week (the Patch Change Day). Apply a new patch ...

  16. Surface properties and early murine pre-osteoblastic cell responses of phosphoric acid modified titanium surface

    PubMed Central

    Osathanon, Thanaphum; Sawangmake, Chenphop; Ruangchainicom, Nanticha; Wutikornwipak, Pavitra; Kantukiti, Panisa; Nowwarote, Nunthawan; Pavasant, Prasit

    2015-01-01

    Aims The present study investigated the surface properties and murine pre-osteoblast cell (MC3T3-E1) responses of phosphoric acid (H3PO4) treated commercially pure titanium. Methods Titanium discs were treated with various concentration of H3PO4 (5%, 10%, and 20%; v/v) at 90 °C for 30 min. Surface properties were evaluated by profilometer, contact angle meter, and scanning electron microscopy (SEM) with energy dispersive X-rays. MC3T3-E1 attachment and spreading were evaluated by SEM and phalloidin immunohistochemistry staining. Results Surface roughness and wettability were not statistically difference among all experimental and control groups. Phosphate and oxygen were detected on H3PO4 treated surfaces. At 20 min, cell attachment was significantly higher in 10% and 20% H3PO4 treated groups compared to the control. Cells exhibited orientated-cytoskeleton fibers on 20% H3PO4 modified titanium surface. Though, there was no difference in cell spreading stage among all treatment groups. Conclusion H3PO4 treatment on titanium may influence early cell response, particularly on attachment and spreading. PMID:26937362

  17. Inactivation of bacteria on surfaces by sprayed slightly acidic hypochlorous acid water: in vitro experiments.

    PubMed

    Hakim, Hakimullah; Alam, Md Shahin; Sangsriratanakul, Natthanan; Nakajima, Katsuhiro; Kitazawa, Minori; Ota, Mari; Toyofuku, Chiharu; Yamada, Masashi; Thammakarn, Chanathip; Shoham, Dany; Takehara, Kazuaki

    2016-08-01

    The capacity of slightly acidic hypochlorous acid water (SAHW), in both liquid and spray form, to inactivate bacteria was evaluated as a potential candidate for biosecurity enhancement in poultry production. SAHW (containing 50 or 100 ppm chlorine, pH 6) was able to inactivate Escherichia coli and Salmonella Infantis in liquid to below detectable levels (≤2.6 log10 CFU/ml) within 5 sec of exposure. In addition, SAHW antibacterial capacity was evaluated by spraying it using a nebulizer into a box containing these bacteria, which were present on the surfaces of glass plates and rayon sheets. SAHW was able to inactivate both bacterial species on the glass plates (dry condition) and rayon sheets within 5 min spraying and 5 min contact times, with the exception of 50 ppm SAHW on the rayon sheets. Furthermore, a corrosivity test determined that SAHW does not corrode metallic objects, even at the longest exposure times (83 days). Our findings demonstrate that SAHW is a good candidate for biosecurity enhancement in the poultry industry. Spraying it on the surfaces of objects, eggshells, egg incubators and transport cages could reduce the chances of contamination and disease transmission. These results augment previous findings demonstrating the competence of SAHW as an anti-viral disinfectant. PMID:27052464

  18. Inactivation of bacteria on surfaces by sprayed slightly acidic hypochlorous acid water: in vitro experiments

    PubMed Central

    HAKIM, Hakimullah; ALAM, Md. Shahin; SANGSRIRATANAKUL, Natthanan; NAKAJIMA, Katsuhiro; KITAZAWA, Minori; OTA, Mari; TOYOFUKU, Chiharu; YAMADA, Masashi; THAMMAKARN, Chanathip; SHOHAM, Dany; TAKEHARA, Kazuaki

    2016-01-01

    The capacity of slightly acidic hypochlorous acid water (SAHW), in both liquid and spray form, to inactivate bacteria was evaluated as a potential candidate for biosecurity enhancement in poultry production. SAHW (containing 50 or 100 ppm chlorine, pH 6) was able to inactivate Escherichia coli and Salmonella Infantis in liquid to below detectable levels (≤2.6 log10 CFU/ml) within 5 sec of exposure. In addition, SAHW antibacterial capacity was evaluated by spraying it using a nebulizer into a box containing these bacteria, which were present on the surfaces of glass plates and rayon sheets. SAHW was able to inactivate both bacterial species on the glass plates (dry condition) and rayon sheets within 5 min spraying and 5 min contact times, with the exception of 50 ppm SAHW on the rayon sheets. Furthermore, a corrosivity test determined that SAHW does not corrode metallic objects, even at the longest exposure times (83 days). Our findings demonstrate that SAHW is a good candidate for biosecurity enhancement in the poultry industry. Spraying it on the surfaces of objects, eggshells, egg incubators and transport cages could reduce the chances of contamination and disease transmission. These results augment previous findings demonstrating the competence of SAHW as an anti-viral disinfectant. PMID:27052464

  19. Cavity modes and their excitations in elliptical plasmonic patch nanoantennas.

    PubMed

    Chakrabarty, Ayan; Wang, Feng; Minkowski, Fred; Sun, Kai; Wei, Qi-Huo

    2012-05-21

    We present experimental and theoretical studies of two dimensional periodic arrays of elliptical plasmonic patch nanoantennas. Experimental and simulation results demonstrate that the azimuthal symmetry breaking of the metal patches leads to the occurrence of even and odd resonant cavity modes and the excitation geometries dependent on their modal symmetries. We show that the cavity modes can be described by the product of radial and angular Mathieu functions with excellent agreements with both simulations and experiments. The effects of the patch periodicity on the excitation of the surface plasmon and its coupling with the cavity modes are also discussed. PMID:22714147

  20. Osteoblast response to the surface of amino acid-functionalized hydroxyapatite.

    PubMed

    Lee, Wing-Hin; Loo, Ching-Yee; Chrzanowski, Wojciech; Rohanizadeh, Ramin

    2015-06-01

    Interactions between proteins and the surface of biomaterials are crucial for the biological function and success of materials implanted in the human body. In this study, hydroxyapatite (HA) with negative and positive surface charges were fabricated by functionalizing the HA surface with acidic or basic amino acids. The influence of HA surface charge on protein adsorption and cell activities was studied. The crystallinity, morphology, and surface charge of amino acid-functionalized HA (AA-HA) particles and the stability of amino acids on the HA surface were determined. Both AA-HA and unmodified HA were studied for their capacity to adsorb proteins present in biological medium. The results showed that the presence of glutamic acid; Glu (acidic amino acids) and arginine; Arg (basic amino acids) on the HA surface resulted in higher protein adsorption owing to stronger electrostatic attraction between the HA particles and the proteins in medium. Functionalizing HA with Glu and Arg significantly promoted osteoblast adhesion on the surface of treated HA. No significant differences in cell proliferation between negatively and positively charged HA was observed. Significantly higher alkaline phosphatase (ALP) activity of osteoblasts on both charged surfaces was seen as compared to the unmodified HA. The study demonstrated that immobilization of amino acids (Glu and Arg) on the surface of HA promoted osteoblast proliferation and ALP activity. PMID:25346517

  1. Effects of coastal transport on larval patches: Models and observations

    NASA Astrophysics Data System (ADS)

    Tilburg, Charles E.; Houser, Letise T.; Steppe, Cecily N.; Garvine, Richard W.; Epifanio, Charles E.

    2006-03-01

    We used a combination of field observations and numerical modeling to examine the physical mechanisms responsible for the evolution and transport of patches of blue crab larvae in the mouth of Delaware Bay. The observations consisted of larval collections and surface salinity measurements taken along a moving spatial grid whose origin was determined by a satellite-tracked drifter. Examination of field observations revealed a slender larval patch that was aligned with salinity contours. Measurement of the salting rate of the larval patch indicated that the patch moved through the offshore edge of a buoyant plume due to wind-driven upwelling circulation. A numerical model that provided realistic simulations of the flow field at the mouth of Delaware Bay and the adjoining coastal ocean was used to examine the physical mechanisms responsible for the movement and evolution of the patch. We conducted a series of simulations in which we separately examined the effects of tides, buoyancy-driven flow, and wind-driven transport. Results showed that both tides and buoyancy-driven flow tend to elongate an initially square fluid element. Although winds alone have little effect on the shape of a patch, wind-driven flow can effectively move a patch through a complex flow field in which the deformation by tides and buoyancy-driven circulation can have significant effects. This study represents the first observation and analysis of a larval patch that remains intact while moving through the edge of a buoyant plume. It provides new insight into the shape of larval patches in Delaware Bay and any region with strong buoyancy- and tidally-driven flow, suggesting that typical larval patches may not be characterized by equal across- and alongshelf dimensions but instead tend to be slender shapes that are aligned with the flow field.

  2. Edge of polar cap patches

    NASA Astrophysics Data System (ADS)

    Hosokawa, K.; Taguchi, S.; Ogawa, Y.

    2016-04-01

    On the night of 4 December 2013, a sequence of polar cap patches was captured by an all-sky airglow imager (ASI) in Longyearbyen, Norway (78.1°N, 15.5°E). The 630.0 nm airglow images from the ASI of 4 second exposure time, oversampled the emission of natural lifetime (with quenching) of at least ˜30 sec, introduce no observational blurring effects. By using such high-quality ASI images, we succeeded in visualizing an asymmetry in the gradients between the leading/trailing edges of the patches in a 2-D fashion. The gradient in the leading edge was found to be 2-3 times steeper than that in the trailing edge. We also identified fingerlike structures, appearing only along the trailing edge of the patches, whose horizontal scale size ranged from 55 to 210 km. These fingers are considered to be manifestations of plasma structuring through the gradient-drift instability (GDI), which is known to occur only along the trailing edge of patches. That is, the current 2-D observations visualized, for the first time, how GDI stirs the patch plasma and such a mixing process makes the trailing edge more gradual. This result strongly implies a close connection between the GDI-driven plasma stirring and the asymmetry in the large-scale shape of patches and then suggests that the fingerlike structures can be used as markers to estimate the fine-scale structure in the plasma flow within patches.

  3. Cabbage Patch Chemistry.

    ERIC Educational Resources Information Center

    Journal of Chemical Education, 2000

    2000-01-01

    This activity takes students through the process of fermentation. Requires an entire month for the full reaction to take place. The reaction, catalyzed by bacterial enzymes, produces lactic acid from glucose. (SAH)

  4. Nanowired three-dimensional cardiac patches

    NASA Astrophysics Data System (ADS)

    Dvir, Tal; Timko, Brian P.; Brigham, Mark D.; Naik, Shreesh R.; Karajanagi, Sandeep S.; Levy, Oren; Jin, Hongwei; Parker, Kevin K.; Langer, Robert; Kohane, Daniel S.

    2011-11-01

    Engineered cardiac patches for treating damaged heart tissues after a heart attack are normally produced by seeding heart cells within three-dimensional porous biomaterial scaffolds. These biomaterials, which are usually made of either biological polymers such as alginate or synthetic polymers such as poly(lactic acid) (PLA), help cells organize into functioning tissues, but poor conductivity of these materials limits the ability of the patch to contract strongly as a unit. Here, we show that incorporating gold nanowires within alginate scaffolds can bridge the electrically resistant pore walls of alginate and improve electrical communication between adjacent cardiac cells. Tissues grown on these composite matrices were thicker and better aligned than those grown on pristine alginate and when electrically stimulated, the cells in these tissues contracted synchronously. Furthermore, higher levels of the proteins involved in muscle contraction and electrical coupling are detected in the composite matrices. It is expected that the integration of conducting nanowires within three-dimensional scaffolds may improve the therapeutic value of current cardiac patches.

  5. Nanowired three-dimensional cardiac patches.

    PubMed

    Dvir, Tal; Timko, Brian P; Brigham, Mark D; Naik, Shreesh R; Karajanagi, Sandeep S; Levy, Oren; Jin, Hongwei; Parker, Kevin K; Langer, Robert; Kohane, Daniel S

    2011-11-01

    Engineered cardiac patches for treating damaged heart tissues after a heart attack are normally produced by seeding heart cells within three-dimensional porous biomaterial scaffolds. These biomaterials, which are usually made of either biological polymers such as alginate or synthetic polymers such as poly(lactic acid) (PLA), help cells organize into functioning tissues, but poor conductivity of these materials limits the ability of the patch to contract strongly as a unit. Here, we show that incorporating gold nanowires within alginate scaffolds can bridge the electrically resistant pore walls of alginate and improve electrical communication between adjacent cardiac cells. Tissues grown on these composite matrices were thicker and better aligned than those grown on pristine alginate and when electrically stimulated, the cells in these tissues contracted synchronously. Furthermore, higher levels of the proteins involved in muscle contraction and electrical coupling are detected in the composite matrices. It is expected that the integration of conducting nanowires within three-dimensional scaffolds may improve the therapeutic value of current cardiac patches. PMID:21946708

  6. Design of an innovative magnetostrictive patch actuator

    NASA Astrophysics Data System (ADS)

    Cinquemani, S.; Giberti, H.

    2015-04-01

    Magnetostrictive actuators can be profitably used to reduce vibration in structures. However, this technology has been exploited only to develop inertial actuators, while patches actuators have not been ever used in practice. Patches actuators consist on a layer of magnetostrictive material, which has to be stuck to the surface of the vibrating structure, and on a coil surrounding the layer itself. However, the presence of the winding severely limits the use of such devices. As a matter of fact, the scientific literature reports only theoretical uses of such actuators, but, in practice it does not seem they were ever used. This paper presents an innovative solution to improve the structure of the actuator patches, allowing their use in several practical applications. The principle of operation of these devices is rather simple. The actuator patch is able to generate a local deformation of the surface of the vibrating structure so as to introduce an equivalent damping that dissipates the kinetic energy associated to the vibration. This deformation is related to the behavior of the magnetostrictive material immersed in a variable magnetic field generated by the a variable current flowing in the winding. Contrary to what suggested in the theoretical literature, the designed device has the advantage of generating the variable magnetic field no longer in close proximity of the material, but in a different area, thus allowing a better coupling. The magnetic field is then conveyed through a suitable ferromagnetic structure to the magnetostrictive material. The device has been designed and simulated through FEA. Results confirm that the new configuration can easily overcome all the limits of traditional devices.

  7. Application of monodirectional Janus patch to oromucosal delivery system.

    PubMed

    You, Jae Bem; Choi, Ah Young; Baek, Jieung; Oh, Myung Seok; Im, Sung Gap; Lee, Kyung Eun; Gwak, Hye Sun

    2015-10-28

    Drug delivery through mucosae has received huge research attention owing to its advantageous characteristics such as accurate dose control and the avoidance of premature metabolism of vulnerable drugs by oral administration. However, body fluid in mucosae may dissolve the drug, releasing it to unwanted directions. Here, a Janus drug delivery patch with monodirectional diffusion property is devised to deliver drugs efficiently and to overcome the issue of unwanted drug release. A polyester fabric is coated with a hydrophobic polymer, poly(3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10-heptadecafluorodecyl methacrylate), via initiated chemical vapor deposition. Subsequently, hydrophilicity is rendered selectively on one surface by base-catalyzed hydrolysis to obtain a Janus substrate with both hydrophobic and hydrophilic surfaces. The hydrophilic surface of the Janus substrate is further coated with resveratrol-loaded hydrogel to produce a Janus drug delivery patch. The fabricated patch efficiently blocks fluid penetration from one side to the other in mucous environment. Delivery of resveratrol through hairless mouse skin and reconstructed human mucosae using Janus patch shows higher permeation flux compared to bare control patch. The Janus drug delivery patch shown in this study can be a useful tool for efficient transmucosal delivery of various kinds of drugs. PMID:26346613

  8. Creation of polar cap patches

    NASA Astrophysics Data System (ADS)

    Hosokawa, K.; Taguchi, S.; Ogawa, Y.

    2014-12-01

    Polar cap patches, which are islands of enhanced plasma density drifting anti-sunward, are one of the outstanding phenomena in the polar cap F region ionosphere. In the last decade, data from all-sky airglow imagers have been extensively used for better understanding the propagation of patches in the central polar cap region. But still, it has been rather difficult to capture the birth of patches in their generation region near the dayside cusp, because, in most places, the dayside part of the polar cap ionosphere is sunlit even in winter. In Longyearbyen (78.1N, 15.5E), Norway, however, optical observations are possible near the dayside cusp region in a limited period around the winter solstice. This enables us to directly image how polar cap patches are born in the cusp. In this paper, we present a few intervals of daytime optical observations, during which polar cap patches were generated within the field-of-view of an all-sky imager in Longyearbyen. During all the intervals studied here, we identified several signatures of poleward moving auroral forms (PMAF) in the equatorward half of the field-of-view, which are known as ionospheric manifestations of dayside reconnection. Interestingly, patches were directly produced from such poleward moving auroral signatures and propagated poleward along the anti-sunward convection near the cusp. In the literature, Lorentzen et al. (2012) first reported such a direct production of patches from PMAFs. During the current observations, however, we succeeded in tracking the propagation of patches until they reached the poleward edge of the field-of-view of the imager. This confirms that the faint airglow structures produced from PMAFs were actually transported for a long distance towards the central polar cap area; thus, polar cap patches were produced. From this set of observations, we suggest that polar cap patches during moderately disturbed conditions (i.e, non-storm time conditions) can be directly produced by the

  9. Spectral-IP Characteristics of Bacterial Activity on Sulfide Mineral Surfaces: Implications for Detection and Environmental Impact Assessment of Acid Mine Drainage.

    NASA Astrophysics Data System (ADS)

    Blackmore, S. R.; Southam, G.; Katsube, J.

    2004-12-01

    Spectral induced polarization (IP) measurements were carried out, over a frequency range of 1.0-106 Hz, on pyrite crystal surfaces colonized by thiobacilli at different growth stages and in `sedimentary systems' with different pyrite-quartz ratios. The purpose was to determine if these varied pyrite-bacteria conditions are reflected in the spectral-IP responses and whether IP, as a geophysical tool, is able to detect and assess the potential for acid mine drainage due to bacterial activity. The study used an Acidithiobacillus ferrooxidans subspecies, isolated from the Kam Kotia mine tailings, Timmins, Ontario, using limiting dilutions in 9K buffer medium (pH 3; (NH4)2SO4, 0.4 g; K2HPO4, 0.1 g; MgSO47H2O, 0.1 g) supplemented with 3.3 g/L of filter sterilized FeSO47H2O as their energy source. Duplicate syringe columns experiments were prepared using varying concentrations of acid-washed silica and/or pyrite (simulating either disseminated or stratified pyritic ore) and colonized with thiobacilli. All columns were maintained under saturating conditions with circumneutral 9K buffer. Each column began with an acidic pH and became more alkaline over the 2-month experiment, typically ending close to the circumneutral pH of the media. The spectral-IP measurements responded directly to bacterial activity, i.e., changes in impedance were observed in all samples. Samples that contained bacteria were higher in impedance (with significant differences observed between frequencies of 10-100000Hz). Over time, scanning electron microscopy revealed increases in the bacterial corrosion surface area, bacterial ferric-sulfate encasement, the number of bacteria colonies and abundance of ferric precipitates. Bacterially induced mineralization was observed as patches in all systems. In the disseminated and stratified environments, the patches covered 8-10% of the grains, predominantly along the fractured mineral edges. In the `massive' 100% pyrite systems, bacteria-mineral patches covered

  10. Oxidation of L-ascorbic acid to dehydroascorbic acid on the surface of the red blood cell

    SciTech Connect

    Wagner, E.; Jennings, M.; Bennett, K.

    1986-05-01

    L-ascorbic acid-1-/sup 14/C when incubated with human blood did not bind irreversibly to any of the protein components of plasma but did migrate irreversibly into erythrocytes. Isolation and characterization via IR of the moiety trapped within the cell established its identity as apparently, unchanged L-ascorbic acid. When dehydroascorbic acid-1-/sup 14/C was incubated with human blood, the results were identical including the identity of the entrapped moiety, L-ascorbic acid. It was found that L-ascorbic acid was enzymatically oxidized on the surface of the red blood cell to dehydroascorbic acid which diffused through the lipid soluble portion of the cell membrane and was enzymatically reduced back to ascorbic acid within the cell.

  11. Surface Energy and Work Function Control of AlOx/Al Surfaces by Fluorinated Benzylphosphonic Acids.

    PubMed

    Abraham, Ffion; Ford, William E; Scholz, Frank; Nelles, Gabriele; Sandford, Graham; von Wrochem, Florian

    2016-05-11

    The performance of organic electronic devices can be significantly improved by modifying metal electrodes with organic monolayers, which alter the physical and chemical nature of the interface between conductor and semiconductor. In this paper we examine a series of 12 phosphonic acid compounds deposited on the native oxide layer of aluminum (AlOx/Al), an electrode material with widespread applications in organic electronics. This series includes dodecylphosphonic acid as a reference and 11 benzylphosphonic acids, seven of which are fluorinated, including five newly synthesized derivatives. The monolayers are experimentally characterized by contact angle goniometry and by X-ray photoemission spectroscopy (XPS), and work function data obtained by low-intensity XPS are correlated with molecular dipoles obtained from DFT calculations. We find that monolayers are formed with molecular areas ranging from 17.7 to 42.9 Å(2)/molecule, and, by the choice of appropriate terminal groups, the surface energy can be tuned from 23.5 mJ/m(2) to 70.5 mJ/m(2). Depending on the number and position of fluorine substituents on the aromatic rings, a variation in the work function of AlOx/Al substrates over a range of 0.91 eV is achieved, and a renormalization procedure based on molecular density yields a surprising agreement of work function changes with interface dipoles as expected from Helmholtz' equation. The ability to adjust energetics and adhesion at organic semiconductor/AlOx interfaces has immediate applications in devices such as OLEDs, OTFTs, organic solar cells, and printed organic circuits. PMID:27093557

  12. Boronic acid as an efficient anchor group for surface modification of solid polyvinyl alcohol.

    PubMed

    Nishiyabu, Ryuhei; Shimizu, Ai

    2016-07-28

    We report the use of boronic acid as an anchor group for surface modification of solid polyvinyl alcohol (PVA); the surfaces of PVA microparticles, films, and nanofibers were chemically modified with boronic acid-appended fluorescent dyes through boronate esterification using a simple soaking technique in a short time under ambient conditions. PMID:27311634

  13. Acid-base properties of the surface of the α-Al2O3 suspension

    NASA Astrophysics Data System (ADS)

    Ryazanov, M. A.; Dudkin, B. N.

    2009-12-01

    The distribution of the acid-base centers on the surface of α-Al2O3 suspension particles was studied by potentiometric titration, and the corresponding p K spectra were constructed. It was inferred that the double electric layer created by the supporting electrolyte substantially affected the screening of the acid-base centers on the particle surface of the suspension.

  14. Montage of Apollo Crew Patches

    NASA Technical Reports Server (NTRS)

    1979-01-01

    This montage depicts the flight crew patches for the manned Apollo 7 thru Apollo 17 missions. The Apollo 7 through 10 missions were basically manned test flights that paved the way for lunar landing missions. Primary objectives met included the demonstration of the Command Service Module (CSM) crew performance; crew/space vehicle/mission support facilities performance and testing during a manned CSM mission; CSM rendezvous capability; translunar injection demonstration; the first manned Apollo docking, the first Apollo Extra Vehicular Activity (EVA), performance of the first manned flight of the lunar module (LM); the CSM-LM docking in translunar trajectory, LM undocking in lunar orbit, LM staging in lunar orbit, and manned LM-CSM docking in lunar orbit. Apollo 11 through 17 were lunar landing missions with the exception of Apollo 13 which was forced to circle the moon without landing due to an onboard explosion. The craft was,however, able to return to Earth safely. Apollo 11 was the first manned lunar landing mission and performed the first lunar surface EVA. Landing site was the Sea of Tranquility. A message for mankind was delivered, the U.S. flag was planted, experiments were set up and 47 pounds of lunar surface material was collected for analysis back on Earth. Apollo 12, the 2nd manned lunar landing mission landed in the Ocean of Storms and retrieved parts of the unmanned Surveyor 3, which had landed on the Moon in April 1967. The Apollo Lunar Surface Experiments Package (ALSEP) was deployed, and 75 pounds of lunar material was gathered. Apollo 14, the 3rd lunar landing mission landed in Fra Mauro. ALSEP and other instruments were deployed, and 94 pounds of lunar materials were gathered, using a hand cart for first time to transport rocks. Apollo 15, the 4th lunar landing mission landed in the Hadley-Apennine region. With the first use of the Lunar Roving Vehicle (LRV), the crew was bale to gather 169 pounds of lunar material. Apollo 16, the 5th lunar

  15. Broadband Plasmonic Microlenses based on Patches of Nanoholes

    PubMed Central

    Gao, Hanwei; Hyun, Jerome K.; Lee, Min Hyung; Yang, Jiun-Chan; Lauhon, Lincoln J.; Odom, Teri W.

    2010-01-01

    This paper reports a new type of diffractive microlens based on finite-areas of 2D arrays of circular nanoholes (patches). The plasmonic microlenses can focus single wavelengths of light across the entire visible spectrum as well as broadband white light with little divergence. The focal length is determined primarily by the overall size of the patch and is tolerant to significant changes in patch substructure, including lattice geometry and local order of the circular nanoholes. The optical throughput, however, depends sensitively on the patch substructure and is determined by the wavelengths of surface plasmon resonances. This simple diffractive lens design enables millions of broadband plasmonic microlenses to be fabricated in parallel using soft nanolithographic techniques. PMID:20839781

  16. Surface acid-base characteristics of fiber materials by contact angle measurements

    SciTech Connect

    Mao Youan . Dept. of Materials Science and Applied Chemistry)

    1993-11-05

    Contact angle measurements were used to study the surface acid-base characteristics of treated and untreated carbon fibers, and of treated and untreated silicon carbide fibers. It has been shown that, when untreated the surfaces of these two fibers exhibits amphoteric, but the base character is dominant. After oxidization in a liquid phase, the surface acid character of the carbon fibers changes little, whereas the base character becomes much stronger. The treatment, with boiling-concentrated HNO[sub 3] for three hours and the sintering treatment in air at 500 C. for eight hours, has little effect on the surface acid-base characteristics of the silicon carbide fibers.

  17. Taro corms mucilage/HPMC based transdermal patch: an efficient device for delivery of diltiazem hydrochloride.

    PubMed

    Sarkar, Gunjan; Saha, Nayan Ranjan; Roy, Indranil; Bhattacharyya, Amartya; Bose, Madhura; Mishra, Roshnara; Rana, Dipak; Bhattacharjee, Debashis; Chattopadhyay, Dipankar

    2014-05-01

    The aim of this work is to examine the effectiveness of mucilage/hydroxypropylmethylcellulose (HPMC) based transdermal patch (matrix type) as a drug delivery device. We have successfully extracted mucilage from Colocasia esculenta (Taro) corms and prepared diltiazem hydrochloride incorporated mucilage/HPMC based transdermal patches using various wt% of mucilage by the solvent evaporation technique. Characterization of both mucilage and transdermal patches has been done by several techniques such as Molisch's test, organoleptic evaluation of mucilage, mechanical, morphological and thermal analysis of transdermal patches. Skin irritation test is studied on hairless Albino rat skin showing that transdermal patches are apparently free of potentially hazardous skin irritation. Fourier transform infrared analysis shows that there is no interaction between drug, mucilage and HPMC while scanning electron microscopy shows the surface morphology of transdermal patches. In vitro drug release time of mucilage-HPMC based transdermal patches is prolonged with increasing mucilage concentration in the formulation. PMID:24556117

  18. Structural health monitoring of composite repair patches in bridge rehabilitation

    NASA Astrophysics Data System (ADS)

    Wu, Zhanjun; Ghosh, Kumar; Qing, Xinlin; Karbhari, Vistasp; Chang, Fu-Kuo

    2006-03-01

    In recent years, there are many issues involving safety on old bridges, aircrafts and other structures, which threaten the lives of the people using those structures, as well as the structures themselves. To prevent future failure, various measures are being taken. Structure rehabilitations with carbon fiber reinforced composite patches have been adopted and demonstrated to be an excellent way to enhance/repair the structures and prolong the service life. However, there are still many problems residing in this kind of technology that remain unsolved, for example, the failure of the interface between composite repair patches and their host structures. This is a critical issue that must be addressed in order to show the viability of composite patches. In order to study debond occurring between composite repair patches and their host structures, a structure health monitoring scheme was demonstrated on a concrete bridge model in the laboratory. The system is based on active sensing with diagnostic lamb waves, in which piezoelectric transducers are used as both sensors and actuators. In the test, six SMART Layers, each having eight piezoelectirc transducers, were integrated with two composite repair strips on the deck slab of the concrete bridge model. For the three diagnostic layers with each composite repair patch, two layers were bonded on the top surface of the patch, and the other is embedded at the interface between the composite repair patch and the deck slab of the concrete bridge model. The loading procedure of the test included three phases. First, the bridge model was preloaded to initiate cracks on the deck slabs and the repair patches were then implemented. Second, the load was raised to reach the shear capacity of the girders of the bridge model and then the repair patches were implemented on those girders. Lastly, the structure was loaded to damage the deck slabs. During the test, the initiation and development of debond between composite repair patches

  19. Periodicities of polar cap patches

    NASA Astrophysics Data System (ADS)

    Hosokawa, K.; Taguchi, S.; Ogawa, Y.; Aoki, T.

    2013-01-01

    A highly sensitive all-sky electron multiplier charge-coupled device airglow imager has been operative in Longyearbyen, Norway since October 2011. The imager captures 630.0 nm all-sky images with an exposure time of 4 s, which is about 10 times shorter than that achieved by conventional cooled CCD imagers. This allows us to visualize the structure of polar cap patches without blurring effects and better estimate their periodicities. We present, as one of the first results from the imager, an event of successive appearance of patches on the night of 21 December 2011. A time series of the optical intensity at zenith showed modulations having two distinguished periods, one at 40 min and the other at 5-12 min. One possible explanation is that such a coexistence of two different periodicities is a manifestation of simultaneous occurrence of patch generation processes on the 40 min periodicity was created by large-scale reconfiguration of the dayside convection pattern while the 5-12 min modulations were closely associated with mechanisms driven by pulsed reconnection on the dayside magnetopause. Such a combined effect of multiple patch generation processes may play a role in structuring patches; thus, it would be of particular importance for evaluating the space weather effects in the trans-ionospheric communications environment in the polar cap.

  20. DNA-based patterning of tethered membrane patches

    PubMed Central

    Hughes, Laura D.; Boxer, Steven G.

    2013-01-01

    Solid-supported lipid bilayers are useful model systems for mimicking cellular membranes; however, the interaction of the bilayer with the surface can disrupt the function of integral membrane proteins and impede topological transformations such as membrane fusion. As a result, a variety of tethered or cushioned lipid bilayer architectures have been described, which retain the proximity to the surface, enabling surface-sensitive techniques, but physically distance the bilayer from the surface. We have recently developed a method for spatially separating a lipid bilayer from a solid support using DNA lipids. In this system, a DNA strand is covalently attached to a glass slide or SiO2 wafer, and giant unilamellar vesicles (GUVs) displaying the complement rupture to form a planar lipid bilayer tethered above the surface. However, the location of the patch is random, determined by where the DNA-GUV initially binds to its complement. To allow greater versatility and control, we sought a way to pattern tethered membrane patches. We present a method for creating spatially distinct tethered membrane patches on a glass slide using microarray printing. Surface-reactive DNA sequences are spotted onto the slide, incubated to covalently link the DNA to the surface, and DNA-GUVs patches are formed selectively on the printed DNA. By interfacing the bilayers with microfluidic flow cells, materials can be added on top of or fused into the membrane to change the composition of the bilayers. With further development, this approach would enable rapid screening of different patches in protein binding assays and would enable interfacing patches with electrical detectors. PMID:23992147

  1. Surface acidity of silica-titania mixed oxides

    SciTech Connect

    Odenbrand, C.U.I.; Brandin, J.G.M. ); Busca, G. )

    1992-06-01

    A study of the acidity of coprecipitated SiO[sub 2]-TiO[sub 2] oxides is presented. The amount of acidity has been determined by ammonia adsorption at 150 C. The acidity was also characterized by TPD of adsorbed ammonia and by infrared spectroscopy of various adsorbed probes, such as pivalonitrile, pyridine, ammonia, and n-butylamine. From the quantitative measurements of adsorption of ammonia and from TPD it was concluded that the SiO[sub 2]-TiO[sub 2] mixture can be regarded as a mechanical mixture of silica and titania. However, the IR investigation showed that Ti enters in small amounts into the silica framework. This results in formation of very strong Lewis acid sites, caused by incomplete tetrahedral coordination of Ti[sup 4[minus

  2. Adsorption behavior of antimony(III) oxyanions on magnetite surface in aqueous organic acid environment

    NASA Astrophysics Data System (ADS)

    Mittal, Vinit K.; Bera, Santanu; Narasimhan, S. V.; Velmurugan, S.

    2013-02-01

    Antimony(III) adsorption is observed on magnetite (Fe3O4) surface under acidic and reducing condition through surface hydroxyl (SOH) groups bonding on Fe3O4 surface. Desorption of adsorbed Sb(III) is observed from Fe3O4 surface along with iron release in organic acid at 85 °C after 5 h of experiment. Tartaric acid (TA) shows minimum Sb(III) adsorption on Fe3O4 among the organic acid studied. The reason is TA having two sets of adjacent functional groups viz. Odbnd Csbnd OH and Csbnd OH which are responsible for the formation of five-membered bidendate chelate with Sb(III). Other oxyanions, cations or complexing agents along with TA influences the Sb(III) adsorption on Fe3O4. The surface of magnetite is modified by the addition of fatty acids viz. Lauric acid, benzoic acid to bind the Ssbnd OH groups present on the surface. This results in delaying the process of adsorption without changing the quantity of saturation adsorption of Sb(III) on Fe3O4 surface.

  3. Solid-State 17O NMR Study of Benzoic Acid Adsorption On Metal Oxide Surfaces

    SciTech Connect

    Hagaman, Edward {Ed} W; Chen, Banghao; Jiao, Jian; Parsons, Williams

    2012-01-01

    Solid-state 17O NMR spectra of 17O-labeled benzoic and anisic acids are reported and benzoic acid is used to probe the surface of metal oxides. Complexes formed when benzoic acid is dry-mixed with mesoporous silica, and nonporous titania and alumina are characterized. Chemical reactions with silica are not observed. The nature of benzoic acid on silica is a function of the water content of the oxide. The acid disperses in the pores of the silica if the silica is in equilibrium with ambient laboratory humidity. The acid displays high mobility as evidenced by a liquid-like, Lorentzian resonance. Excess benzoic acid remains as the crystalline hydrogen-bonded dimer. Benzoic acid reacts with titania and alumina surfaces in equilibrium with laboratory air to form the corresponding titanium and aluminum benzoates. In both materials the oxygen of the 17O-labeled acid is bound to the metal, showing the reaction proceeds by bond formation between oxygen deficient metal sites and the oxygen of the carboxylic acid. 27Al MAS NMR confirms this mechanism for the reaction on alumina. Dry mixing of benzoic acid with alumina rapidly quenches pentacoordinate aluminum sites, excellent evidence that these sites are confined to the surface of the alumina particles.

  4. Organic acids enhanced decoloration of azo dye in gas phase surface discharge plasma system.

    PubMed

    Wang, Tiecheng; Qu, Guangzhou; Ren, Jingyu; Sun, Qiuhong; Liang, Dongli; Hu, Shibin

    2016-01-25

    A gas phase surface discharge plasma combined with organic acids system was developed to enhance active species mass transfer and dye-containing wastewater treatment efficacy, with Acid Orange II (AO7) as the model pollutant. The effects of discharge voltage and various organic acid additives (acetic acid, lactic acid and nonoic acid) on AO7 decoloration efficiency were evaluated. The experimental results showed that an AO7 decoloration efficiency of approximately 69.0% was obtained within 4 min of discharge plasma treatment without organic acid addition, which was improved to 82.8%, 83.5% and 88.6% within the same treatment time with the addition of acetic acid, lactic acid and nonoic acid, respectively. The enhancement effects on AO7 decoloration efficiency could be attributed to the decrease in aqueous surface tension, improvement in bubble distribution and shape, and increase in ozone equivalent concentration. The AO7 wastewater was biodegradable after discharge plasma treatment with the addition of organic acid. AO7 decomposition intermediates were analyzed by UV-vis spectrometry and GC-MS; 2-naphthol, 1,4-benzoquinone, phthalic anhydride, coumarin, 1,2-naphthoquinone, and 2-formyl-benzoic acid were detected. A possible pathway for AO7 decomposition in this system was proposed. PMID:26444488

  5. Heterogeneous interactions of chlorine nitrate, hydrogen chloride, and nitric acid with sulfuric acid surfaces at stratospheric temperatures

    NASA Technical Reports Server (NTRS)

    Tolbert, Margaret A.; Rossi, Michel J.; Golden, David M.

    1988-01-01

    The heterogeneous interactions of ClONO2, HCl, and HNO3 with sulfuric acid surfaces were studied using a Knudsen cell flow reactor. The surfaces studied, chosen to simulate global stratospheric particulate, were composed of 65-75 percent H2SO4 solutions at temperatures in the range -63 to -43 C. Heterogeneous loss, but not reaction, of HNO3 and HCl occurred on these surfaces; the measured sticking coefficients are reported. Chlorine nitrate reacted on the cold sulfuric acid surfaces, producing gas-phase HOCl and condensed HNO3. CLONO2 also reacted with HCl dissolved in the 65-percent H2SO4 solution at -63 C, forming gaseous Cl2. In all cases studied, the sticking and/or reaction coefficients were much larger for the 65-percent H2SO4 solution at -63 C than for the 75-percent solution at -43 C.

  6. One-Pot synthesis of phosphorylated mesoporous carbon heterogeneous catalysts with tailored surface acidity

    SciTech Connect

    Fulvio, Pasquale F; Mahurin, Shannon Mark; Mayes, Richard T; Bauer, Christopher; Wang, Xiqing; Veith, Gabriel M; Dai, Sheng

    2012-01-01

    Soft-templated phosphorylated mesoporous carbons with homogeneous distributions of phosphate groups were prepared by a 'one-pot' synthesis method using mixtures of phosphoric acid with hydrochloric, or nitric acids in the presence of Pluronic F127 triblock copolymer. Adjusting the various ratios of phosphoric acid used in these mixtures resulted in carbons with distinct adsorption, structural and surface acidity properties. The pore size distributions (PSDs) from nitrogen adsorption at -196 C showed that mesoporous carbons exhibit specific surface areas as high as 551 m{sup 2}/g and mesopores as large as 13 nm. Both structural ordering of the mesopores and the final phosphate contents were strongly dependent on the ratios of H{sub 3}PO{sub 4} in the synthesis gels, as shown by transmission electron microscopy (TEM), X-ray photoelectron (XPS) and energy dispersive X-ray spectroscopy (EDS). The number of surface acid sites determined from temperature programmed desorption of ammonia (NH{sub 3}-TPD) were in the range of 0.3-1.5 mmol/g while the active surface areas are estimated to comprise 5-54% of the total surface areas. Finally, the conversion temperatures for the isopropanol dehydration were lowered by as much as 100 C by transitioning from the least acidic to the most acidic catalysts surface.

  7. Smart patch piezoceramic actuator issues

    NASA Technical Reports Server (NTRS)

    Griffin, Steven F.; Denoyer, Keith K.; Yost, Brad

    1993-01-01

    The Phillips Laboratory is undertaking the challenge of finding new and innovative ways to integrate sensing, actuation, and the supporting control and power electronics into a compact self-contained unit to provide vibration suppression for a host structure. This self-contained unit is commonly referred to as a smart patch. The interfaces to the smart patch will be limited to standard spacecraft power and possibly a communications line. The effort to develop a smart patch involves both contractual and inhouse programs which are currently focused on miniaturization of the electronics associated with vibrational control using piezoceramic sensors and actuators. This paper is comprised of two distinct parts. The first part examines issues associated with bonding piezoceramic actuators to a host structure. Experimental data from several specimens with varying flexural stiffness are compared to predictions from two piezoelectric/substructure coupling models, the Blocked Force Model and the Uniform Strain Model with Perfect Bonding. The second part of the paper highlights a demonstration article smart patch created using the insights gained from inhouse efforts at the Phillips Laboratory. This demonstration article has self contained electronics on the same order of size as the actuator powered by a voltage differential of approximately 32 volts. This voltage is provided by four rechargeable 8 volt batteries.

  8. Smart patch piezoceramic actuator issues

    NASA Astrophysics Data System (ADS)

    Griffin, Steven F.; Denoyer, Keith K.; Yost, Brad

    1993-02-01

    The Phillips Laboratory is undertaking the challenge of finding new and innovative ways to integrate sensing, actuation, and the supporting control and power electronics into a compact self-contained unit to provide vibration suppression for a host structure. This self-contained unit is commonly referred to as a smart patch. The interfaces to the smart patch will be limited to standard spacecraft power and possibly a communications line. The effort to develop a smart patch involves both contractual and inhouse programs which are currently focused on miniaturization of the electronics associated with vibrational control using piezoceramic sensors and actuators. This paper is comprised of two distinct parts. The first part examines issues associated with bonding piezoceramic actuators to a host structure. Experimental data from several specimens with varying flexural stiffness are compared to predictions from two piezoelectric/substructure coupling models, the Blocked Force Model and the Uniform Strain Model with Perfect Bonding. The second part of the paper highlights a demonstration article smart patch created using the insights gained from inhouse efforts at the Phillips Laboratory. This demonstration article has self contained electronics on the same order of size as the actuator powered by a voltage differential of approximately 32 volts. This voltage is provided by four rechargeable 8 volt batteries.

  9. Selective adsorption of benzoic acid species on patterned OH/Si(100) surface

    SciTech Connect

    Ihm, Kyuwook; Han, Jin Hee; Kim, Bongsoo; Chung, Sukmin; Hwang, Chan-Cuk; Kang, Tai-Hee; Kim, Ki-Jeong; Jung, Yu Jin; An, Ki-Seok

    2006-08-15

    It has recently been observed that benzoic acid strongly reacts with OH group on the silicon surface. Here, by defining the area in which OH group is adsorbed on the Si surface, the selective adsorption of benzoic acid species was attempted. The patterned OH/Si surface was prepared by irradiating the zeroth order beam from the bending magnet of the synchrotron facility through the gold mesh placed in front of the OH/Si sample. For discerning the selectively adsorbed molecule by x-ray photoelectron emission microscopy (X-PEEM) at N k edge, 4-nitrobenzoic acid was utilized instead of benzoic acid. Near edge x-ray absorption fine structure spectra at carbon and oxygen k edges were in good accord with the previous results obtained from the benzoic acid system. The X-PEEM images around N k edge clearly showed that the molecules adsorb only on the area in which OH groups remain.

  10. Model for a surface film of fatty acids on rain water and aerosol particles

    NASA Astrophysics Data System (ADS)

    Seidl, Winfried

    Organic compounds with polar groups can form films on the water surface which lower the surface tension and may hinder the transport of water vapor and trace gases through the interface. A model is presented which describes in detail surface films formed by fatty acids. The model has been applied to measured concentrations of fatty acids on rain water and atmospheric aerosol particles. In most cases only a diluted film has been calculated which does not affect their physical and chemical properties. The exception was a clean region in the western USA, where the fatty acid concentrations are sufficiently high to form a dense film on atmospheric aerosol particles. An algorithm for the identification of the sources of fatty acids was developed. It showed leaf abrasion or biomass burning as a major source of fatty acids in the western USA.

  11. EFFECT OF AN ACID RAIN ENVIRONMENT ON LIMESTONE SURFACES.

    USGS Publications Warehouse

    Mossotti, Victor G.; Lindsay, James R.; Hochella, Michael F., Jr.

    1987-01-01

    Salem limestone samples were exposed to weathering for 1 y in several urban and one rural environments. Samples exposed in the rural location were chemically indistinguishable from the freshly quarried limestone, whereas all samples collected from urban exposure sites developed gypsum stains on the ground-facing surfaces where the stones were not washed by precipitation. The gas-solid reaction of SO//2 with calcite was selected for detailed consideration. It appears from the model that under arid conditions, the quantity of stain deposited on an unwashed surface is independent of atmospheric SO//2 concentration once the surface has been saturated with gypsum. Under wet conditions, surface sulfation and weight loss are probably dominated by mechanisms involving wet stone. However, if the rain events are frequent and delimited by periods of dryness, the quantity of gypsum produced by a gas-solid reaction mechanism should correlate with both the frequency of rain events and the atmospheric SO//2 level.

  12. Geophysical investigation and assessment of the Rye Patch Known Geothermal Resource Area, Rye Patch, Nevada

    NASA Astrophysics Data System (ADS)

    McDonald, Mark Richmond

    A gravity and ground-based magnetic survey was conducted at the Rye Patch Known Geothermal Resource Area located at Rye Patch, Nevada. The purpose of the study was to attempt to further delineate the geothermal reservoir and/or to identify potential drilling targets. The survey consisted of collecting data at 264 new stations to augment data from 203 stations collected in 2008. Information from previous seismic, aeromagnetic and geochemical investigations was also examined and incorporated. Filtering methods including removal of a polynomial trend surface and wavelength filtering were utilized on the gravity data to remove the strong regional overprint caused by the large density contrast between the low density alluvium within the valley versus the near-surface higher density rock in the higher elevations. After filtering, the Rye Patch Fault, the Range Front Fault, an east-west trending feature at the location of "southeast" fault, and another possible fault at the southern end of the study area are observable in the Rye Patch geothermal anomaly area. In the Humboldt House anomaly area, the northeast trending features identified by MacNight et al. (2005) and Ellis (2011) are not discernable although there is a significant gravity low in this area. Based on estimates arrived at by using 2nd derivative methods, fault dip angles are on the order of 80° and are consistent with previous conceptual models of the site. Computer modeling indicates that the fault blocks may also be rotated back to the east. Due to errors in collecting diurnal information, the ground-based magnetic information was of limited use. Anomalies identified with the magnetic data do however correlate with the locations of anomalies identified using gravity and aeromagnetic surveys. Results indicate that gravity methods can be an effective method of defining approximate fault locations, lengths, and approximate trends and dip angles.

  13. Effect of acidic solutions on the surface degradation of a micro-hybrid composite resin.

    PubMed

    Münchow, Eliseu A; Ferreira, Ana Cláudia A; Machado, Raissa M M; Ramos, Tatiana S; Rodrigues-Junior, Sinval A; Zanchi, Cesar H

    2014-01-01

    Composite resins may undergo wear by the action of chemical substances (e.g., saliva, alcohol, bacterial acids) of the oral environment, which may affect the material's structure and surface properties. This study evaluated the effect of acidic substances on the surface properties of a micro-hybrid composite resin (Filtek Z-250). Eighty specimens were prepared, and baseline hardness and surface roughness (KMN0 and Ra0, respectively) were measured. The specimens were subjected to sorption (SO) and solubility (SL) tests according to ISO 4049:2009, but using different storage solutions: deionized water; 75/25 vol% ethanol/water solution; lactic acid; propionic acid; and acetic acid. The acids were used in two concentrations: PA and 0.02 N. pH was measured for all solutions and final hardness (KMN1) and surface roughness (Ra1) were measured. Data were analyzed with paired t-tests and one-way ANOVA and Tukey's test (a=5%). All solutions decreased hardness and increased the Ra values, except for the specimens stored in water and 0.02 N lactic acid, which maintained the hardness. All solutions produced similar SO and SL phenomena, except for the 0.02 N lactic acid, which caused lower solubility than the other solutions. Ethanol showed the highest pH (6.6) and the 0.02 N lactic acid the lowest one (2.5). The solutions affected negatively the surface properties of the composite resin; in addition, an acidic pH did not seem to be a significant factor that intensifies the surface degradation phenomena. PMID:25250496

  14. FT-IR characterization of the acidic and basic sites on a nanostructured aluminum nitride surface

    SciTech Connect

    Baraton, M.I.; Chen, X.; Gonsalves, K.E.

    1997-12-31

    A nanostructured aluminum nitride powder prepared by sol-gel type chemical synthesis is analyzed by Fourier transform infrared spectrometry. The surface acidic and basic sites are probed out by adsorption of several organic molecules. Resulting from the unavoidable presence of oxygen, the aluminum nitride surface is an oxinitride layer in fact, and its surface chemistry should present some analogies with alumina. Therefore, a thorough comparison between the acido-basicity of aluminum nitride and aluminum oxide is discussed. The remaining nitrogen atoms in the first atomic layer modify the acidity-basicity relative balance and reveals the specificity of the aluminum nitride surface.

  15. Biomimetic Deposition of Hydroxyapatite by Mixed Acid Treatment of Titanium Surfaces.

    PubMed

    Zhao, J M; Park, W U; Hwang, K H; Lee, J K; Yoon, S Y

    2015-03-01

    A simple chemical method was established for inducing bioactivity of Ti metal. In the present study, two kinds of mixed acid solutions were used to treat Ti specimens to induce Ca-P formation. Following a strong mixed acid activation process, Ca-P coatings successfully formed on the Ti surfaces in the simulated body fluid. Strong mixed acid etching was used to increase the roughness of the metal surface, because the porous and rough surfaces allow better adhesion between Ca-P coatings and substrate. Nano-scale modification of titanium surfaces can alter cellular and tissue responses, which may benefit osseointegration and dental implant therapy. Some specimens were treated with a 5 M NaOH aqueous solution, and then heat treated at 600 °C in order to form an amorphous sodium titanate layer on their surface. This treated titanium metal is believed to form a dense and uniform bone-like apatite layer on its surface in a simulated body fluid (SBF). This study proved that mixed acid treatment is not only important for surface passivation but is also another bioactive treatment for titanium surfaces, an alternative to alkali treatment. In addition, mixed acid treatment uses a lower temperature and shorter time period than alkali treatment. PMID:26413704

  16. Smart patches: self-monitoring composite patches for the repair of aircraft

    NASA Astrophysics Data System (ADS)

    Crossley, Samuel D.; Marioli-Riga, Zaira; Tsamasphyros, George; Kanderakis, George; Furnarakis, Nikos; Ikiades, Aris; Konstantaki, Mary

    2004-03-01

    Conventional aircraft repair techniques employ bolted or riveted metallic reinforcements, which frequently introduce additional stress concentrations leading to further cracking and creating areas difficult or impossible to inspect. Bonded composite repairs ("patches") result in the elimination of stress concentrations caused by additional fastener holes, improved strength to weight ratio and present a sealed interface. This reduces even further the danger of corrosion and fretting under the repair, gives greater flexibility in design and lessens application time while lengthening fatigue life. Embedding optical fibres and sensors into the patch, and combining this with advanced data collection and processing systems, creating a so-called "smart patch", will enable the real-time assessment of aircraft structural integrity resulting in reliable prediction of maintenance requirements for repaired structures. This paper describes the current state of the art in smart patch technology, and includes a detailed description of the measurement problem and of the work being undertaken to solve it, at both the component and system level. An analysis of typical crack behaviour, based on FE modelling is presented and this demonstrates the need for optical strain sensors having a very short gauge length. The paper discusses the advantages and limitations of very short Fibre Bragg Gratings (FBGs) in this context and also provides early experimental data from 1mm and 2mm gratings which have been fabricated for this purpose. The paper also describes the impact of the measurement and environmental constraints on the design of the FBG interrogation system and presents the results of initial trials. The work is being undertaken in the framework of a collaborative project (ACIDS) which is co-funded by the European Commission.

  17. ACIDIC EPISODES AND SURFACE WATER CHEMISTRY: A COMPARISON OF NORTHEAST AND SOUTHEAST STUDY SITES

    EPA Science Inventory

    Much of the emphasis in the National Acid Precipitation Assessment Program (NAPAP) has been on historical or longterm trends in surface water acidification. Short-term acidic episodes, however, also might have significant adverse effects on aquatic ecosystems. The U.S. EPA is pre...

  18. BIOPHYSICAL PROPERTIES OF NUCLEIC ACIDS AT SURFACES RELEVANT TO MICROARRAY PERFORMANCE

    PubMed Central

    Rao, Archana N.; Grainger, David W.

    2014-01-01

    Both clinical and analytical metrics produced by microarray-based assay technology have recognized problems in reproducibility, reliability and analytical sensitivity. These issues are often attributed to poor understanding and control of nucleic acid behaviors and properties at solid-liquid interfaces. Nucleic acid hybridization, central to DNA and RNA microarray formats, depends on the properties and behaviors of single strand (ss) nucleic acids (e.g., probe oligomeric DNA) bound to surfaces. ssDNA’s persistence length, radius of gyration, electrostatics, conformations on different surfaces and under various assay conditions, its chain flexibility and curvature, charging effects in ionic solutions, and fluorescent labeling all influence its physical chemistry and hybridization under assay conditions. Nucleic acid (e.g., both RNA and DNA) target interactions with immobilized ssDNA strands are highly impacted by these biophysical states. Furthermore, the kinetics, thermodynamics, and enthalpic and entropic contributions to DNA hybridization reflect global probe/target structures and interaction dynamics. Here we review several biophysical issues relevant to oligomeric nucleic acid molecular behaviors at surfaces and their influences on duplex formation that influence microarray assay performance. Correlation of biophysical aspects of single and double-stranded nucleic acids with their complexes in bulk solution is common. Such analysis at surfaces is not commonly reported, despite its importance to microarray assays. We seek to provide further insight into nucleic acid-surface challenges facing microarray diagnostic formats that have hindered their clinical adoption and compromise their research quality and value as genomics tools. PMID:24765522

  19. Heterogeneous Reactions of Acetic Acid with Oxide Surfaces: Effects of Mineralogy and Relative Humidity.

    PubMed

    Tang, Mingjin; Larish, Whitney A; Fang, Yuan; Gankanda, Aruni; Grassian, Vicki H

    2016-07-21

    We have investigated the heterogeneous uptake of gaseous acetic acid on different oxides including γ-Al2O3, SiO2, and CaO under a range of relative humidity conditions. Under dry conditions, the uptake of acetic acid leads to the formation of both acetate and molecularly adsorbed acetic acid on γ-Al2O3 and CaO and only molecularly adsorbed acetic acid on SiO2. More importantly, under the conditions of this study, dimers are the major form for molecularly adsorbed acetic acid on all three particle surfaces investigated, even at low acetic acid pressures under which monomers are the dominant species in the gas phase. We have also determined saturation surface coverages for acetic acid adsorption on these three oxides under dry conditions as well as Langmuir adsorption constants in some cases. Kinetic analysis shows that the reaction rate of acetic acid increases by a factor of 3-5 for γ-Al2O3 when relative humidity increases from 0% to 15%, whereas for SiO2 particles, acetic acid and water are found to compete for surface adsorption sites. PMID:27322707

  20. Effect of mycolic acid on surface activity of binary surfactant lipid monolayers.

    PubMed

    Chimote, G; Banerjee, R

    2008-12-15

    In pulmonary tuberculosis, Mycobacterium tuberculosis lies in close physical proximity to alveolar surfactant. Cell walls of the mycobacteria contain loosely bound, detachable surface-active lipids. In this study, the effect of mycolic acid (MA), the most abundant mycobacterial cell wall lipid, on the surface activity of phospholipid mixtures from lung surfactant was investigated using Langmuir monolayers and atomic force microscopy (AFM). In the presence of mycolic acid, all the surfactant lipid mixtures attained high minimum surface tensions (between 20 and 40 mN/m) and decreased surface compressibility moduli <50 mN/m. AFM images showed that the smooth surface topography of surfactant lipid monolayers was altered with addition of MA. Aggregates with diverse heights of at least two layer thicknesses were found in the presence of mycolic acid. Mycolic acids could aggregate within surfactant lipid monolayers and result in disturbed monolayer surface activity. The extent of the effect of mycolic acid depended on the initial state of the monolayer, with fluid films of DPPC-POPC and DPPC-CHOL being least affected. The results imply inhibitory effects of mycolic acid toward lung surfactant lipids and could be a mechanism of lung surfactant dysfunction in pulmonary tuberculosis. PMID:18848703

  1. Laser restoring the glass surface treated with acid-based paint

    NASA Astrophysics Data System (ADS)

    Strusevich, Anastasia V.; Poltaev, Yuriy A.; Sinev, Dmitrii A.

    2013-11-01

    The modern city facilities are often being attacked by graffiti artists, and increasingly vandals leave "tags" using paints, which compound based on acids, hydrofluoric or acetic commonly. These paints not only ink the surface, but also increase the surface roughness, and such impact can not be corrected by conventional cleaning. Thus, it was requested to develop technology that would not only clean the surface, but also to restore its structure by smoothing out irregularities and roughness formed after exposure in acid. In this work we investigated the effect of restoring the surface of the glass, spoiled by acid-based paint and then treated with CO2-laser. During the experiments, it was found that it is real to create the single-step laser surface restoring technology.

  2. Sulfuric Acid on Europa's Surface and the Radiolytic Sulfur Cycle

    NASA Technical Reports Server (NTRS)

    Carlson, R.; Johnson, R.; Anderson, M.

    1999-01-01

    Galileo infrared spectra of Europa's surface show distorted water bands that have been attributed to hydrated evaporite salts (McCord et al., J. Geophys. Res. 104, 11827, 1999) or to the scattering properties of ice (Dalton and Clark, Bull. Am. Astron. Soc. 30, 1081, 1998).

  3. Intelligent Patching of Conceptual Geometry for CFD Analysis

    NASA Technical Reports Server (NTRS)

    Li, Wu

    2010-01-01

    The iPatch computer code for intelligently patching surface grids was developed to convert conceptual geometry to computational fluid dynamics (CFD) geometry (see figure). It automatically uses bicubic B-splines to extrapolate (if necessary) each surface in a conceptual geometry so that all the independently defined geometric components (such as wing and fuselage) can be intersected to form a watertight CFD geometry. The software also computes the intersection curves of surface patches at any resolution (up to 10.4 accuracy) specified by the user, and it writes the B-spline surface patches, and the corresponding boundary points, for the watertight CFD geometry in the format that can be directly used by the grid generation tool VGRID. iPatch requires that input geometry be in PLOT3D format where each component surface is defined by a rectangular grid {(x(i,j), y(i,j), z(i,j)):1less than or equal to i less than or equal to m, 1 less than or equal to j less than or equal to n} that represents a smooth B-spline surface. All surfaces in the PLOT3D file conceptually represent a watertight geometry of components of an aircraft on the half-space y greater than or equal to 0. Overlapping surfaces are not allowed, but could be fixed by a utility code "fixp3d". The fixp3d utility code first finds the two grid lines on the two surface grids that are closest to each other in Hausdorff distance (a metric to measure the discrepancies of two sets); then uses one of the grid lines as the transition line, extending grid lines on one grid to the other grid to form a merged grid. Any two connecting surfaces shall have a "visually" common boundary curve, or can be described by an intersection relationship defined in a geometry specification file. The intersection of two surfaces can be at a conceptual level. However, the intersection is directional (along either i or j index direction), and each intersecting grid line (or its spine extrapolation) on the first surface should intersect

  4. A High Gain and Broadband C-Band Aperture-Coupled Patch Antenna

    NASA Astrophysics Data System (ADS)

    Liu, Chunheng; Lu, Yueguang; Du, Chunlei; Luo, Xiangang

    2007-12-01

    A aperture-coupled patch antenna is designed with parasitic elements connecting to the rectangle ring on the bottom of antenna substrate through metal vias, which lead the current induced by patch radiator to the top surface of antenna substrate. Therefore, the effective radiation is enhanced and higher gain is achieved. The bandwidth is broadened simultaneously due to the structure of aperture-coupled patch antenna with parasitic elements. Compared to the conventional aperture-coupled patch antenna, the antenna gain increases averagely 2 dB due to the novel structure. Compared to patch antenna of electromagnetic band-gap, the dimensions of novel patch antenna greatly decreases, which can be used as element in the array antenna. Two kinds manufactured antenna are both measured in an anechoic chamber. The good agreements between numerical simulation and experimental prototype have been obtained.

  5. The Role of Organic Acids in the Acid-Base Status of Surface Waters at Bickford Watershed, Massachusetts

    NASA Astrophysics Data System (ADS)

    Eshleman, K. N.; Hemond, H. F.

    1985-10-01

    An experimental field study of the alkalinity and major ion budgets of Bickford watershed in central Massachusetts indicates that organic acid production by the ecosystem contributes measurably to surface water acidification. Applying the concepts of alkalinity, electroneutrality of solutions, and mass balance, organic acids were found to comprise 20% of all strong acid sources on one subcatchment annually, a value half as large as the measured bulk mineral acid deposition. Inorganic cation to anion ratios in Provencial Brook varied between 1.0 in winter and 1.6 during summer, suggesting the presence of up to 100 μeq/L of unmeasured charge from organic anions during the growing season. Base titrations and ultraviolet photooxidation experiments confirmed the existence of low pKa (3.5-5.0) acidic functional groups. A positive linear relationship between dissolved organic carbon (DOC) and anion deficit for a group of surface and groundwater samples indicates the DOC contains about 7.5 meq carboxylic groups per gram C. Biological factors related to both upland and wetland carbon metabolism apparently control this natural acidification phenomenon, which has not been documented on other watersheds in the northeastern United States for which annual alkalinity budgets have been determined.

  6. Embedding of Cortical Representations by the Superficial Patch System

    PubMed Central

    Da Costa, Nuno M. A.; Girardin, Cyrille C.; Naaman, Shmuel; Omer, David B.; Ruesch, Elisha; Grinvald, Amiram; Douglas, Rodney J.

    2011-01-01

    Pyramidal cells in layers 2 and 3 of the neocortex of many species collectively form a clustered system of lateral axonal projections (the superficial patch system—Lund JS, Angelucci A, Bressloff PC. 2003. Anatomical substrates for functional columns in macaque monkey primary visual cortex. Cereb Cortex. 13:15–24. or daisy architecture—Douglas RJ, Martin KAC. 2004. Neuronal circuits of the neocortex. Annu Rev Neurosci. 27:419–451.), but the function performed by this general feature of the cortical architecture remains obscure. By comparing the spatial configuration of labeled patches with the configuration of responses to drifting grating stimuli, we found the spatial organizations both of the patch system and of the cortical response to be highly conserved between cat and monkey primary visual cortex. More importantly, the configuration of the superficial patch system is directly reflected in the arrangement of function across monkey primary visual cortex. Our results indicate a close relationship between the structure of the superficial patch system and cortical responses encoding a single value across the surface of visual cortex (self-consistent states). This relationship is consistent with the spontaneous emergence of orientation response–like activity patterns during ongoing cortical activity (Kenet T, Bibitchkov D, Tsodyks M, Grinvald A, Arieli A. 2003. Spontaneously emerging cortical representations of visual attributes. Nature. 425:954–956.). We conclude that the superficial patch system is the physical encoding of self-consistent cortical states, and that a set of concurrently labeled patches participate in a network of mutually consistent representations of cortical input. PMID:21383233

  7. OpenSSO Project Patches

    2009-06-08

    These are patches to Sun Microsystems open source OpenSSO project to fix various bugs and incorporate changes for Sandia and NNSA to use the product including fixes to improve OpenSSO's authentication and authorization abilities. These fixes will then by incorporated by Sun into their Sun Access Manager product, which is used by various DOE/NNSA plants and labs. Having Sun maintain these changes will relieve SNL and DOE from the cost of maintaining the changes themselves.

  8. Radiation-induced reactions of amino acids adsorbed on solid surfaces

    NASA Astrophysics Data System (ADS)

    López-Esquivel Kranksith, L.; Negrón-Mendoza, A.; Mosqueira, F. G.; Ramos-Bernal, Sergio

    2010-07-01

    The purpose of this work is to study the adsorption of compounds such as amino acids on clays and carbon nanotubes (CNTs) as a possible phase in the chemical evolution that may have occurred on the primitive Earth or in extraterrestrial environments. We further study the behavior of amino acids adsorbed on these solid surfaces at different conditions of pH and levels of irradiation, simulating a high-radiation field at early Earth conditions. The relevance of this work is to explain the possible contribution of solids (clays and CNTs) as promoters of polymerization and as shields for the adsorbed organic compounds against external sources of energy. To this end, tryptophan, aspartic acid, and glutamic acid were adsorbed on fixed amounts of solid surfaces and were irradiated by a 60Co source for different periods of time at fixed dose rates. After irradiation, the amino acids were extracted from the solid and analyzed with UV and IR spectroscopes and high-performance liquid chromatography. The most efficient surface for adsorption of amino acids was clay, followed by CNTs. Studies of the gamma irradiation of amino acids adsorbed on clay (in the solid phase) show a low yield of recovery of the amino acid.

  9. Mechanisms of Radionuclide-Hyroxycarboxylic Acid Interactions for Decontamination of Metallic Surfaces

    SciTech Connect

    A.J. Francis; C.J. Dodge; J.B. Gillow; G.P. Halada; C.R. Clayton

    2002-04-24

    Is this EMSP program we investigated the key fundamental issues involved in the use of simple and safe methods for the removal of radioactive contamination from equipment and facilities using hydroxycarboxylic acids. Specifically, we investigate (i) the association of uranium with various iron oxides commonly formed on corroding plain carbon steel surfaces, (ii) the association of uranium with corroding metal coupons under a variety of conditions, and (iii) the decontamination of the uranium contaminated metal coupons by citric acid or citric acid formulations containing oxalic acid and hydrogen peroxide.

  10. Determining surface areas of marine alga cells by acid-base titration method.

    PubMed

    Wang, X; Ma, Y; Su, Y

    1997-09-01

    A new method for determining the surface area of living marine alga cells was described. The method uses acid-base titration to measure the surface acid/base amount on the surface of alga cells and uses the BET (Brunauer, Emmett, and Teller) equation to estimate the maximum surface acid/base amount, assuming that hydrous cell walls have carbohydrates or other structural compounds which can behave like surface Brönsted acid-base sites due to coordination of environmental H2O molecules. The method was applied to 18 diverse alga species (including 7 diatoms, 2 flagellates, 8 green algae and 1 red alga) maintained in seawater cultures. For the species examined, the surface areas of individual cells ranged from 2.8 x 10(-8) m2 for Nannochloropsis oculata to 690 x 10(-8) m2 for Dunaliella viridis, specific surface areas from 1,030 m2.g-1 for Dunaliella salina to 28,900 m2.g-1 for Pyramidomonas sp. Measurement accuracy was 15.2%. Preliminary studies show that the method may be more promising and accurate than light/electron microscopic measurements for coarse estimation of the surface area of living algae. PMID:9297794

  11. Repeated exposure of acidic beverages on esthetic restorative materials: An in-vitro surface microhardness study

    PubMed Central

    Sunny, Steffy M.; Rai, Kavita; Hegde, Amitha M.

    2016-01-01

    Background A manifold increase in the consumption of aerated beverages has witnessed a twin increase in tooth wear and raised demand for esthetic restorative materials. This study aimed to evaluate the surface microhardness changes of esthetic restorative materials following treatment with aerated beverages in an in-vitro situation. Material and Methods The initial surface microhardness of the restorative materials GC Fuji II LC, GC Fuji IX, Nano Glass ionomer, Resin and Nano composite was recorded. These materials were studied under 3 groups that included those exposed to the acidic beverages daily, weekly once in a month and those that had no exposures at all. The final surface microhardness of the materials was recorded following experimentation and was subjected to statistical comparisons. Results The restorative materials were compared for their surface microhardness changes following respective treatments using the T-test and One-way ANOVA analysis. Inter-comparisons between the groups showed statistical significance (p<.05), when treated with both the beverages. The five restorative materials revealed surface microhardness loss; the maximum reduction noticed with the Nano glass ionomer cement tested (p<.0005). Conclusions The surface microhardness of restorative materials markedly reduced upon repeated exposures with acidic beverages; the product with phosphoric acid producing the maximum surface microhardness loss. Key words:Restorative materials, acidic beverages, surface microhardness, resin composites, glass ionomers. PMID:27398183

  12. Surface modification of montmorillonite on surface Acid-base characteristics of clay and thermal stability of epoxy/clay nanocomposites.

    PubMed

    Park, Soo-Jin; Seo, Dong-Il; Lee, Jae-Rock

    2002-07-01

    In this work, the effect of surface treatments on smectitic clay was investigated in surface energetics and thermal behaviors of epoxy/clay nanocomposites. The pH values, X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FT-IR) were used to analyze the effect of cation exchange on clay surface and the exfoliation phenomenon of clay interlayer. The surface energetics of clay and thermal properties of epoxy/clay nanocomposites were investigated in contact angles and thermogravimetric analysis (TGA), respectively. From the experimental results, the surface modification of clay by dodecylammonium chloride led to the increases in both distance between silicate layers of about 8 A and surface acid values, as well as in the electron acceptor component (gamma(+)(s)) of surface free energy, resulting in improved interfacial adhesion between basic (or electron donor) epoxy resins and acidic (electron acceptor) clay interlayers. Also, the thermal stability of nanocomposites was highly superior to pure epoxy resin due to the presence of the well-dispersed clay nanolayer, which has a barrier property in a composite system. PMID:16290714

  13. Soluble expression of proteins correlates with a lack of positively-charged surface

    NASA Astrophysics Data System (ADS)

    Chan, Pedro; Curtis, Robin A.; Warwicker, Jim

    2013-11-01

    Prediction of protein solubility is gaining importance with the growing use of protein molecules as therapeutics, and ongoing requirements for high level expression. We have investigated protein surface features that correlate with insolubility. Non-polar surface patches associate to some degree with insolubility, but this is far exceeded by the association with positively-charged patches. Negatively-charged patches do not separate insoluble/soluble subsets. The separation of soluble and insoluble subsets by positive charge clustering (area under the curve for a ROC plot is 0.85) has a striking parallel with the separation that delineates nucleic acid-binding proteins, although most of the insoluble dataset are not known to bind nucleic acid. Additionally, these basic patches are enriched for arginine, relative to lysine. The results are discussed in the context of expression systems and downstream processing, contributing to a view of protein solubility in which the molecular interactions of charged groups are far from equivalent.

  14. SURFACE DEGRADATION OF COMPOSITE RESINS BY ACIDIC MEDICINES AND pH-CYCLING

    PubMed Central

    Valinoti, Ana Carolina; Neves, Beatriz Gonçalves; da Silva, Eduardo Moreira; Maia, Lucianne Cople

    2008-01-01

    This study evaluated the effects of acidic medicines (Dimetapp® and Claritin®), under pH-cycling conditions, on the surface degradation of four composite resins (microhybrid: TPH, Concept, Opallis and Nanofilled: Supreme). Thirty disc-shaped specimens (Ø = 5.0 mm / thickness = 2.0 mm) of each composite were randomly assigned to 3 groups (n = 10): a control and two experimental groups, according to the acidic medicines evaluated. The specimens were finished and polished with aluminum oxide discs, and the surface roughness was measured by using a profilometer. After the specimens were submitted to a pH-cycling regimen and immersion in acidic medicines for 12 days, the surface roughness was measured again. Two specimens for each material and group were analyzed by scanning electron microscopy (SEM) before and after pH-cycling. Data were analyzed by the Student's-t test, ANOVA, Duncan's multiple range test and paired t-test (α=0.05). Significant increase in roughness was found only for TPH in the control group and TPH and Supreme immersed in Claritin® (p<0.05). SEM analyses showed that the 4 composite resins underwent erosion and surface degradation after being subjected to the experimental conditions. In conclusion, although the roughness was slightly affected, the pH-cycling and acidic medicines caused surface degradation of the composite resins evaluated. Titratable acidity seemed to play a more crucial role on surface degradation of composite resins than pH. PMID:19089257

  15. A comparative study of surface acid-base characteristics of natural illites from different origins

    SciTech Connect

    Liu, W.; Sun, Z.; Forsling, W.; Du, Q.; Tang, H.

    1999-11-01

    The acid-base characteristics of naturally occurring illites, collected from different locations, were investigated by potentiometeric titrations. The experimental data were interpreted using the constant capacitance surface complexation model. Considerable release of Al and Si from illite samples and subsequent complexation or precipitation of hydroxyl aluminosilicates generated during the acidimetric forward titration and the alkalimetric back titration, respectively, were observed. In order to describe the acid-base chemistry of aqueous illite surfaces, two surface proton-reaction models, introducing the corresponding reactions between the dissolved aluminum species and silicic acid, as well as a surface Al-Si complex on homogeneous illite surface sites, were proposed. Optimization results indicated that both models could provide a good description of the titration behavior for all aqueous illite systems in this study. The intrinsic acidity constants for the different illites were similar in Model 1, showing some generalities in their acid-base properties. Model 1 may be considered as a simplification of Model 2, evident in the similarities between the corresponding constants. In addition, the formation constant for surface Al-Si species (complexes or precipitates) is relatively stable in this study.

  16. Development of a thermostable microneedle patch for influenza vaccination.

    PubMed

    Mistilis, Matthew J; Bommarius, Andreas S; Prausnitz, Mark R

    2015-02-01

    The goal of this study is to develop thermostable microneedle patch formulations for influenza vaccine that can be partially or completely removed from the cold chain. During vaccine drying associated with microneedle patch manufacturing, ammonium acetate and 4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid (HEPES) buffer salts stabilized influenza vaccine, surfactants had little effect during drying, drying temperature had weak effects on vaccine stability, and drying on polydimethylsiloxane (PDMS) led to increased stability compared with drying on stainless steel. A number of excipients, mostly polysaccharides and some amino acids, further stabilized the influenza vaccine during drying. Over longer time scales of storage, combinations of stabilizers preserved the most vaccine activity. Finally, dissolving microneedle patches formulated with arginine and calcium heptagluconate had no significant activity loss for all three strains of seasonal influenza vaccine during storage at room temperature for 6 months. We conclude that appropriately formulated microneedle patches can exhibit remarkable thermostability that could enable storage and distribution of influenza vaccine outside the cold chain. PMID:25448542

  17. A model for heterogeneous chemical processes on the surfaces of ice and nitric acid trihydrate particles

    NASA Technical Reports Server (NTRS)

    Tabazadeh, Azadeh; Turco, Richard P.

    1993-01-01

    The study presents a model that incorporates the physics and physical chemistry of ice surfaces relevant to polar stratospheric clouds. Surface concentrations of H2O, HCl, HOCl, ClONO2, and N2O5 on ice and nitric acid trihydrate (NAT) crystals are computed, and surface reaction rates and reaction probabilities (sticking coefficients) are determined. For gas pressures of about 10 exp -7 torr and temperatures in the range of 180-200 K, HCl completely coats ice and water-rich NAT surfaces, while HOCl, ClOHO2, and N2O5 may cover 0.01-1 percent of these surfaces. The energy parameters are used to calculate surface temperatures such as adsorption and desorption constants, surface coverages, reaction rate coefficients, surface diffusion coefficients, and reaction probabilities for various species and chemical interactions on ice and NAT surfaces. Implications for chemical processing on polar stratospheric clouds are discussed.

  18. DURABILILTY ANALYSIS OF POTHOLE PATCHING MIXTURE IN SNOWY REGIONS

    NASA Astrophysics Data System (ADS)

    Kobayashi, Kiyoshi; Kaito, Kiyoyuki; Fujiwara, Eigo; Mori, Hisashi; Yamamoto, Shingo; Fujioka, Yoshiyuki; Yamada, Masaru

    On the pavement in snowy regions, water spray is carried out as a snow removal activity in winter. Therefore in most cases, pavement surface is in water-soaked condition, and it causes the occurrence of a lot of potholes. Usually, for the potholes, urgent repair is immediately conducted using patching mixtures. However under these circumstances, the patching mixture falls away soon due to the constraint in the construction works. Consequently, as for the maintenance in snowy regions, it is important to develop the optimal repair method or patching mixture material for such regions. In order to provide the basic investigation of this issue, this study statistically evaluates the durability of the patching mixtures of potholes. Concretely, the occurrence process of potholes are modeled by the Weibull hazard model, and the durability performance of the patching mixtures is veried by estimating the hazard model based on the inspection data of actual potholes on the national road in snowy regions and monitoring data after repairing them.

  19. Friction Force Microscopy of Lubricin and Hyaluronic Acid between Hydrophobic and Hydrophilic Surfaces

    PubMed Central

    Chang, Debby P.; Abu-Lail, Nehal I.; Coles, Jeffrey M.; Guilak, Farshid; Jay, Gregory D.; Zauscher, Stefan

    2010-01-01

    Lubricin and hyaluronic acid (HA), molecular constituents of synovial fluid, have long been theorized to play a role in joint lubrication and wear protection. While lubricin has been shown to function as a boundary lubricant, conflicting evidence exists as to the boundary lubricating ability of hyaluronic acid. Here, we use colloidal force microscopy to explore the friction behavior of these two molecules on the microscale between chemically uniform hydrophilic (hydroxyl-terminated) and hydrophobic (methyl-terminated) surfaces in physiological buffer solution. Behaviors on both surfaces are physiologically relevant since the heterogeneous articular cartilage surface contains both hydrophilic and hydrophobic elements. Friction between hydrophobic surfaces was initially high (μ=1.1, at 100nN of applied normal load) and was significantly reduced by lubricin addition while friction between hydrophilic surfaces was initially low (μ=0.1) and was slightly increased by lubricin addition. At lubricin concentrations above 200 µg/ml, friction behavior on the two surfaces was similar (μ=0.2) indicating that nearly all interaction between the two surfaces was between adsorbed lubricin molecules rather than between the surfaces themselves. In contrast, addition of HA did not appreciably alter the frictional behavior between the model surfaces. No synergistic effect on friction behavior was seen in a physiological mixture of lubricin and HA. Lubricin can equally mediate the frictional response between both hydrophilic and hydrophobic surfaces, likely fully preventing direct surface-to-surface contact at sufficient concentrations, whereas HA provides considerably less boundary lubrication. PMID:20936046

  20. Triangulating Nucleic Acid Conformations Using Multicolor Surface Energy Transfer.

    PubMed

    Riskowski, Ryan A; Armstrong, Rachel E; Greenbaum, Nancy L; Strouse, Geoffrey F

    2016-02-23

    Optical ruler methods employing multiple fluorescent labels offer great potential for correlating distances among several sites, but are generally limited to interlabel distances under 10 nm and suffer from complications due to spectral overlap. Here we demonstrate a multicolor surface energy transfer (McSET) technique able to triangulate multiple points on a biopolymer, allowing for analysis of global structure in complex biomolecules. McSET couples the competitive energy transfer pathways of Förster Resonance Energy Transfer (FRET) with gold-nanoparticle mediated Surface Energy Transfer (SET) in order to correlate systematically labeled points on the structure at distances greater than 10 nm and with reduced spectral overlap. To demonstrate the McSET method, the structures of a linear B-DNA and a more complex folded RNA ribozyme were analyzed within the McSET mathematical framework. The improved multicolor optical ruler method takes advantage of the broad spectral range and distances achievable when using a gold nanoparticle as the lowest energy acceptor. The ability to report distance information simultaneously across multiple length scales, short-range (10-50 Å), mid-range (50-150 Å), and long-range (150-350 Å), distinguishes this approach from other multicolor energy transfer methods. PMID:26795549

  1. Effect of temperature on the acid-base properties of the alumina surface: microcalorimetry and acid-base titration experiments.

    PubMed

    Morel, Jean-Pierre; Marmier, Nicolas; Hurel, Charlotte; Morel-Desrosiers, Nicole

    2006-06-15

    Sorption reactions on natural or synthetic materials that can attenuate the migration of pollutants in the geosphere could be affected by temperature variations. Nevertheless, most of the theoretical models describing sorption reactions are at 25 degrees C. To check these models at different temperatures, experimental data such as the enthalpies of sorption are thus required. Highly sensitive microcalorimeters can now be used to determine the heat effects accompanying the sorption of radionuclides on oxide-water interfaces, but enthalpies of sorption cannot be extracted from microcalorimetric data without a clear knowledge of the thermodynamics of protonation and deprotonation of the oxide surface. However, the values reported in the literature show large discrepancies and one must conclude that, amazingly, this fundamental problem of proton binding is not yet resolved. We have thus undertaken to measure by titration microcalorimetry the heat effects accompanying proton exchange at the alumina-water interface at 25 degrees C. Based on (i) the surface sites speciation provided by a surface complexation model (built from acid-base titrations at 25 degrees C) and (ii) results of the microcalorimetric experiments, calculations have been made to extract the enthalpic variations associated respectively to first and second deprotonation of the alumina surface. Values obtained are deltaH1 = 80+/-10 kJ mol(-1) and deltaH2 = 5+/-3 kJ mol(-1). In a second step, these enthalpy values were used to calculate the alumina surface acidity constants at 50 degrees C via the van't Hoff equation. Then a theoretical titration curve at 50 degrees C was calculated and compared to the experimental alumina surface titration curve. Good agreement between the predicted acid-base titration curve and the experimental one was observed. PMID:16504204

  2. Patching. Restitching business portfolios in dynamic markets.

    PubMed

    Eisenhardt, K M; Brown, S L

    1999-01-01

    In turbulent markets, businesses and opportunities are constantly falling out of alignment. New technologies and emerging markets create fresh opportunities. Converging markets produce more. And of course, some markets fade. In this landscape of continuous flux, it's more important to build corporate-level strategic processes that enable dynamic repositioning than it is to build any particular defensible position. That's why smart corporate strategists use patching, a process of mapping and remapping business units to create a shifting mix of highly focused, tightly aligned businesses that can respond to changing market opportunities. Patching is not just another name for reorganizing; patchers have a distinctive mindset. Traditional managers see structure as stable; patching managers believe structure is inherently temporary. Traditional managers set corporate strategy first, but patching managers keep the organization focused on the right set of business opportunities and let strategy emerge from individual businesses. Although the focus of patching is flexibility, the process itself follows a pattern. Patching changes are usually small in scale and made frequently. Patching should be done quickly; the emphasis is on getting the patch about right and fixing problems later. Patches should have a test drive before they're formalized but then be tightly scripted after they've been announced. And patching won't work without the right infrastructure: modular business units, fine-grained and complete unit-level metrics, and companywide compensation parity. The authors illustrate how patching works and point out some common stumbling blocks. PMID:10387579

  3. Surface chemistry of Rh-Mo/{gamma}-Al{sub 2}O{sub 3}: An analysis of surface acidity

    SciTech Connect

    Lowenthal, E.E.; Schwarz, S.; Foley, H.C.

    1995-09-15

    This study highlights the nature of the interactions between the transition metals in the Rh-Mo/{gamma}-Al{sub 2}O{sub 3} system and the underlying alumina surface. The investigation was carried out in the context of exploring the retrograde dehydration to dimethyl ether of primary alcohols produced at active metal sites during CO hydrogenation. Both native {gamma}-Al{sub 2}O{sub 3} and Rh-Mo/{gamma}-Al{sub 2}O{sub 3} samples were doped with KNO{sub 3} in an attempt to create an alkaline-metal oxide layer on the support surface which would screen alcohols from underlying Lewis acidity. The samples were characterized by microreactor-based methanol dehydration studies, analysis of infrared spectra of adsorbed pyridine, and ammonia saturation and temperature-programmed desorption. As expected, the dehydration activity of the samples was strongly correlated to their potassium loading and, hence, their Lewis acidity. More intriguing, however, are the insights gained in this analysis concerning the nature of the interactions between Mo, Rh, and the Lewis acid sites on the alumina surface. Our results are consistent with the principle, suggested in the Mo/{gamma}-Al{sub 2}O{sub 3} literature, that our Mo(CO){sub 6} precursor interacts primarily with nonacidic hydroxyl groups on the dehydrated alumina surface. Furthermore, we provide strong evidence for the diminution of acidity brought on by the adsorption of Rh on Lewis acid sites of Mo/{gamma}-Al{sub 2}O{sub 3}. 30 refs., 9 figs., 1 tab.

  4. The pathways of Marine Plastic into the Ocean Garbage Patches

    NASA Astrophysics Data System (ADS)

    van Sebille, E.; England, M. H.; Froyland, G.

    2013-12-01

    Much of the plastic debris in the near-surface ocean collects in so-called garbage patches where, due to convergence of the surface flow, the debris is trapped for decades to millennia. Here, we use observational data from the Global Drifter Program in a particle-trajectory tracer approach to study the fate of marine debris in the open ocean from coastal regions around the world on interannual to centennial time scales. We find that garbage patches emerge in each of the five subtropical basins. The evolution of each of the five patches is markedly different, however. With the exception of the North Pacific, all patches are much more dispersive than expected from linear ocean circulation theory, suggesting that on centennial time scales the different basins are much better connected than previously thought and that inter-ocean exchanges play a large role in the spreading of marine debris. In order to increase public awareness on this issue of sustainability in the ocean, we have used the methods and data of this study to create a public website at www.adrift.org.au where all interested can investigate the spread of tracer from any and all points on the ocean surface.

  5. Effect of surface acidity and basicity of aluminas on asphaltene adsorption and oxidation.

    PubMed

    Nassar, Nashaat N; Hassan, Azfar; Pereira-Almao, Pedro

    2011-08-01

    This study investigates the effect of surface acidity and basicity of aluminas on asphaltene adsorption followed by air oxidation. Equilibrium batch adsorption experiments were conducted at 25°C with solutions of asphaltenes in toluene at concentrations ranging from 100 to 3000 g/L using three conventional alumina adsorbents with different surface acidity. Data were found to better fit to the Freundlich isotherm model showing a multilayer adsorption. Results showed that asphaltene adsorption is strongly affected by the surface acidity, and the adsorption capacities of asphaltenes onto the three aluminas followed the order acidic>basic and neutral. Asphaltenes adsorbed over aluminas were subjected to oxidation in air up to 600°C in a thermogravimetric analyzer to study the catalytic effect of aluminas with different surface acidity. A correlation was found between Freundlich affinity constant (1/n) and the catalytic activity. Basic alumina that has the lowest 1/n value, depicting strongest interactions, has the highest catalytic activity, followed by neutral and acidic aluminas, respectively. PMID:21571295

  6. Protection of copper surface with phytic acid against corrosion in chloride solution.

    PubMed

    Peca, Dunja; Pihlar, Boris; Ingrid, Milošev

    2014-01-01

    Phytic acid (inositol hexaphosphate) was tested as a corrosion inhibitor for copper in 3% sodium chloride. Phytic acid is a natural compound derived from plants, it is not toxic and can be considered as a green inhibitor. Electrochemical methods of linear polarization and potentiodynamic polarization were used to study the electrochemical behaviour and evaluate the inhibition effectiveness. To obtain the optimal corrosion protection the following experimental conditions were investigated: effect of surface pre-treatment (abrasion and three procedures of surface roughening), pre-formation of the layer of phytic acid, time of immersion and concentration of phytic acid. To evaluate the surface pre-treatment procedures the surface roughness and contact angle were measured. Optimal conditions for formation of phytic layer were selected resulting in the inhibition effectiveness of nearly 80%. Morphology and composition of the layer were further studied by scanning electron microscopy, energy dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy. The layer of phytic acid with thickness in the nanometer range homogeneously covers the copper surface. The obtained results show that this natural compound can be used as a mildly effective corrosion inhibitor for copper in chloride solution. PMID:25286201

  7. Statistical Thermodynamic Model for Surface Tension of Aqueous Organic Acids with Consideration of Partial Dissociation.

    PubMed

    Boyer, Hallie C; Dutcher, Cari S

    2016-06-30

    With statistical mechanics, an isotherm-based surface tension model for single solute aqueous solutions was derived previously (Wexler et al. J. Phys. Chem. Lett. 2013) for the entire concentration range, from infinite dilution to pure liquid solute, as a function of solute activity. In recent work (Boyer et al. J. Phys. Chem. Lett. 2015), empirical model parameters were reduced through physicochemical interpretations of both electrolyte and organic solutes, enabling surface tension predictions for systems where there is little or no data. The prior binary model is extended in the current work for the first time to treat multicomponent systems to predict surface tensions of partially dissociating organic acids (acetic, butyric, citric, formic, glutaric, maleic, malic, malonic, oxalic, propionic, and succinic acids). These organic acids are especially applicable to the study of atmospheric aqueous aerosols, due to their abundance in the atmosphere. In the model developed here, surface tension depends explicitly on activities of both the neutral organic and deprotonated components of the acid. The relative concentrations of the nondissociated and dissociated mole fractions are found using known dissociation constants. Model parameters strongly depend on molecular size, number of functional groups, O:C ratio, and number of carbons. For all organic acids in this study, fully predictive modeling of surface tensions is demonstrated. PMID:27219322

  8. Rapid Trimming of Cell Surface Polysialic Acid (PolySia) by Exovesicular Sialidase Triggers Release of Preexisting Surface Neurotrophin.

    PubMed

    Sumida, Mizuki; Hane, Masaya; Yabe, Uichiro; Shimoda, Yasushi; Pearce, Oliver M T; Kiso, Makoto; Miyagi, Taeko; Sawada, Makoto; Varki, Ajit; Kitajima, Ken; Sato, Chihiro

    2015-05-22

    As acidic glycocalyx on primary mouse microglial cells and a mouse microglial cell line Ra2, expression of polysialic acid (polySia/PSA), a polymer of the sialic acid Neu5Ac (N-acetylneuraminic acid), was demonstrated. PolySia is known to modulate cell adhesion, migration, and localization of neurotrophins mainly on neural cells. PolySia on Ra2 cells disappeared very rapidly after an inflammatory stimulus. Results of knockdown and inhibitor studies indicated that rapid surface clearance of polySia was achieved by secretion of endogenous sialidase Neu1 as an exovesicular component. Neu1-mediated polySia turnover was accompanied by the release of brain-derived neurotrophic factor normally retained by polySia molecules. Introduction of a single oxygen atom change into polySia by exogenous feeding of the non-neural sialic acid Neu5Gc (N-glycolylneuraminic acid) caused resistance to Neu1-induced polySia turnover and also inhibited the associated release of brain-derived neurotrophic factor. These results indicate the importance of rapid turnover of the polySia glycocalyx by exovesicular sialidases in neurotrophin regulation. PMID:25750127

  9. Surface acidity effects of Al-SBA-15 mesoporous materials on adsorptive desulfurization.

    PubMed

    Meng, Xiuhong; Wang, Yuan; Duan, Linhai; Qin, Yucai; Yu, Wenguang; Wang, Qiang; Dong, Shiwei; Ruan, Yanjun; Wang, Haiyan; Song, Lijuan

    2014-09-01

    SBA-15 and Aluminum-substituted SBA-15 with Si/Al molar ratio 10 (Al-SBA-15(10)) mesoporous materials were directly synthesized by a hydrolysis approach and characterized by a powder X-ray diffraction (XRD), N2 physisorption analysis and Fourier transform infrared (FTIR) etc. The relative number of hydroxyl groups was investigated by in situ FTIR systematically. The acid type and acid strength of the adsorbents were monitord by FTIR at 423 K and 673 K, respectively, utilizing pyridine as a probe. Desulfurization performances of the adsorbents were investigated via static adsorption experiment. Gas chromatography-sulfur chemiluminescence detector (GC-SCD) was employed to detect the sulfur compounds in model fuels before and after treated by the adsorbents. The calcined Al-SBA-15(10) material shows well-ordered hexagonal mesostructure and strong Lewis acid sites (L acid) and weak Brönsted acid sites (B acid). The number of hydroxy on the surface of the Al-SBA-15(10) is more than that of SBA-15, which is beneficial to further modifications such as spontaneous monolayer dispersion. Desulfurization performance of the adsorbents is affected by surface acidity of adsorbents and the constituent of model fuels (olefins, arene, etc.). The thiophene and olefins adsorbed on the B acid site of the adsorbent may occur subsequently alkylation reactions, which may block the pores of the adsorbents and thus cause the reduction of desulfurization capacity. PMID:25924387

  10. Effects of Sediment Patches on Sediment Transport Predictions in Steep Mountain Channels

    NASA Astrophysics Data System (ADS)

    Monsalve Sepulveda, A.; Yager, E.

    2013-12-01

    Bed surface patches occur in most gravel-bedded rivers and in steep streams can be divided between relatively immobile boulders and more mobile patches of cobbles and gravel. This spatial variability in grain size, roughness and sorting impact bed load transport by altering the relative local mobility of different grain sizes and creating complex local flow fields. Large boulders also bear a significant part of the total shear stress and we hypothesize that the remaining shear stress on a given mobile patch is a distribution of values that depend on the local topography, patch type and location relative to the large roughness elements and thalweg. Current sediment transport equations do not account for the variation in roughness, local flow and grain size distributions on and between patches and often use an area-weighted approach to obtain a representative grain size distribution and reach-averaged shear stress. Such equations also do not distinguish between active (patches where at least one grain size is in motion) and inactive patches or include the difference in mobility between patch classes as result of spatial shear stress distributions. To understand the effects of sediment patches on sediment transport in steep channels, we calculated the shear stress distributions over a range of patch classes in a 10% gradient step-pool stream. We surveyed the bed with a high density resolution (every 5 cm in horizontal and vertical directions over a 40 m long reach) using a total station and terrestrial LiDAR, mapped and classified patches by their grain size distributions, and measured water surface elevations and mean velocities for low to moderate flow events. Using these data we calibrated a quasi-three dimensional model (FaSTMECH) to obtain shear stress distributions over each patch for a range of flow discharges. We modified Parker's (1990) equations to use the calculated shear stress distribution, measured grain sizes, and a specific hiding function for each

  11. Adsorption of perfluoroalkyl acids by carbonaceous adsorbents: Effect of carbon surface chemistry.

    PubMed

    Zhi, Yue; Liu, Jinxia

    2015-07-01

    Adsorption by carbonaceous sorbents is among the most feasible processes to remove perfluorooctane sulfonic (PFOS) and carboxylic acids (PFOA) from drinking and ground waters. However, carbon surface chemistry, which has long been recognized essential for dictating performance of such sorbents, has never been considered for PFOS and PFOA adsorption. Thus, the role of surface chemistry was systematically investigated using sorbents with a wide range in precursor material, pore structure, and surface chemistry. Sorbent surface chemistry overwhelmed physical properties in controlling the extent of uptake. The adsorption affinity was positively correlated carbon surface basicity, suggesting that high acid neutralizing or anion exchange capacity was critical for substantial uptake of PFOS and PFOA. Carbon polarity or hydrophobicity had insignificant impact on the extent of adsorption. Synthetic polymer-based Ambersorb and activated carbon fibers were more effective than activated carbon made of natural materials in removing PFOS and PFOA from aqueous solutions. PMID:25827692

  12. Investigation on surface structure of potassium permanganate/nitric acid treated poly(tetrafluoroethylene)

    NASA Astrophysics Data System (ADS)

    Fu, Congli; Liu, Shuling; Gong, Tianlong; Gu, Aiqun; Yu, Zili

    2014-10-01

    In the previous articles concerning the treatment of poly(tetrafluoroethylene) (PTFE) with potassium permanganate/nitric acid mixture, the conversion of a hydrophobic to a hydrophilic surface was partially assigned to the defluorination of PTFE and then the introduction of carbonyl and hydroxyl groups into the defluorinated sites. In the present work, PTFE sheets were treated with potassium permanganate/nitric acid, and the surfaces before and after treatment were comparatively characterized by Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD) and scanning electron microscopy (SEM). The surface sediments of the treated PTFE were also determined by atomic absorption spectroscopy (AAS). The results indicate that the conversion of the hydrophobicity to the hydrophilicity on the modified PTFE surface is mainly due to the deposition of hydrophilic manganese oxides which covered the fluorocarbon surface, and no detectable chemical reactions of PTFE occur in the treating process.

  13. Cooperative polymerization of one-patch colloids

    SciTech Connect

    Vissers, Teun; Smallenburg, Frank; Munaò, Gianmarco; Preisler, Zdeněk; Sciortino, Francesco

    2014-04-14

    We numerically investigate cooperative polymerization in an off-lattice model based on a pairwise additive potential using particles with a single attractive patch that covers 30% of the colloid surface. Upon cooling, these particles self-assemble into small clusters which, below a density-dependent temperature, spontaneously reorganize into long straight tubes. We evaluate the partition functions of clusters of all sizes to provide an accurate description of the chemical reaction constants governing this process. Our calculations show that, for intermediate sizes, the partition functions retain contributions from two different structures, differing in both energy and entropy. We illustrate the microscopic mechanism behind the complex polymerization process in this system and provide a detailed evaluation of its thermodynamics.

  14. Locked nucleic acid based beacons for surface interaction studies and biosensor development

    PubMed Central

    Martinez, Karen; Estevez, M.-Carmen; Wu, Yanrong; Phillips, Joseph A.; Medley, Colin D.; Tan, Weihong

    2011-01-01

    DNA sensors and microarrays permit fast, simple and real-time detection of nucleic acids through the design and use of increasingly sensitive, selective and robust molecular probes. Specifically, molecular beacons (MBs) have been employed for this purpose; however, their potential in the development of solid-surface-based biosensors has not been fully realized. This is mainly a consequence of the beacon’s poor stability due to the hairpin structure once immobilized onto a solid surface, commonly resulting in a low signal enhancement. Here, we report the design of a new MB that overcomes some of the limitations of MBs for surface immobilization. Essentially, this new design adds locked nucleic acid bases (LNAs) to the beacon structure, resulting in a LNA molecular beacon (LMB) with robust stability after surface immobilization. To test the efficacy of LMBs against that of regular molecular beacons (RMBs), the properties of selectivity, sensitivity, thermal stability, hybridization kinetics and robustness for the detection of target sequences were compared and evaluated. A 25-fold enhancement was achieved for the LMB on surface with detection limits reaching the low nanomolar range. In addition, the LMB-based biosensor was shown to possess better stability, reproducibility, selectivity and robustness when compared to the RMB. Therefore, as an alternative to conventional DNA and as a prospective tool for use in both DNA microarrays and biosensors, these results demonstrate the potential of the locked nucleic acid bases for nucleic acid design for surface immobilization. PMID:19351140

  15. Exogenic controls on sulfuric acid hydrate production at the surface of Europa

    NASA Astrophysics Data System (ADS)

    Dalton, J. B.; Cassidy, T.; Paranicas, C.; Shirley, J. H.; Prockter, L. M.; Kamp, L. W.

    2013-03-01

    External agents have heavily weathered the visible surface of Europa. Internal and external drivers competing to produce the surface we see include, but are not limited to: aqueous alteration of materials within the icy shell, initial emplacement of endogenic material by geologic activity, implantation of exogenic ions and neutrals from Jupiter's magnetosphere, alteration of surface chemistry by radiolysis and photolysis, impact gardening of upper surface layers, and redeposition of sputtered volatiles. Separating the influences of these processes is critical to understanding the surface and subsurface compositions at Europa. Recent investigations have applied cryogenic reflectance spectroscopy to Galileo Near-Infrared Mapping Spectrometer (NIMS) observations to derive abundances of surface materials including water ice, hydrated sulfuric acid, and hydrated sulfate salts. Here we compare derived sulfuric acid hydrate (H2SO4·nH2O) abundance with weathering patterns and intensities associated with charged particles from Jupiter's magnetosphere. We present models of electron energy, ion energy, and sulfur ion number flux as well as the total combined electron and ion energy flux at the surface to estimate the influence of these processes on surface concentrations, as a function of location. We found that correlations exist linking both electron energy flux (r∼0.75) and sulfur ion flux (r=0.93) with the observed abundance of sulfuric acid hydrate on Europa. Sulfuric acid hydrate production on Europa appears to be limited in some regions by a reduced availability of sulfur ions, and in others by insufficient levels of electron energy. The energy delivered by sulfur and other ions has a much less significant role. Surface deposits in regions of limited exogenic processing are likely to bear closest resemblance to oceanic composition. These results will assist future efforts to separate the relative influence of endogenic and exogenic sources in establishing the

  16. Kinetics of gas phase formic acid decomposition on platinum single crystal and polycrystalline surfaces

    NASA Astrophysics Data System (ADS)

    Detwiler, Michael D.; Milligan, Cory A.; Zemlyanov, Dmitry Y.; Delgass, W. Nicholas; Ribeiro, Fabio H.

    2016-06-01

    Formic acid dehydrogenation turnover rates (TORs) were measured on Pt(111), Pt(100), and polycrystalline Pt foil surfaces at a total pressure of 800 Torr between 413 and 513 K in a batch reactor connected to an ultra-high vacuum (UHV) system. The TORs, apparent activation energies, and reaction orders are not sensitive to the structure of the Pt surface, within the precision of the measurements. CO introduced into the batch reactor depressed the formic acid dehydrogenation TOR and increased the reaction's apparent activation energies on Pt(111) and Pt(100), consistent with behavior predicted by the Temkin equation. Two reaction mechanisms were explored which explain the formic acid decomposition mechanism on Pt, both of which include dissociative adsorption of formic acid, rate limiting formate decomposition, and quasi-equilibrated hydrogen recombination and CO adsorption. No evidence was found that catalytic supports used in previous studies altered the reaction kinetics or mechanism.

  17. Influence of the Surface Acidity of the Alumina on the Sustained Release of Ketoprofen.

    PubMed

    San Roman, Soledad; Gullón, Jesús; Del Arco, Margarita; Martín, Cristina

    2016-07-01

    This work reports the immobilization of ketoprofen into mesoporous alumina, prepared in different way, to assess their possible applications as a matrix for controlled drug release. The acids' surface properties of the aluminas and their effect on the drug content and release rate were also analyzed. The systems have been characterized by powder X-ray diffractometry, Fourier transformer infrared spectroscopy (FT-IR), N2 adsorption desorption, transmission electron microscopy, and FT-IR of pyridine adsorption. The results show that the drug is incorporated inside the pores of mesoporous alumina, and the content and release rate depend of surface acidity, when increase the surface acidity decrease the drug content and increase the release rate. PMID:27287518

  18. Improving effectiveness of coke oven patching

    SciTech Connect

    Withrow, J.A.; McCollum, H.R.

    1982-01-01

    An effective patching program is essential to protect the battery against severe damage which would result from air, foul gas, and fuel gas leaks; and to keep it in operating condition for a reasonable life span. In addition to that basic purpose of patching, other areas such as heating efficiency, coke quality, and emissions performance can benefit from an effective program. Clairton Works and US Steel Research have made improvements in the patching program in several broad categories: equipment used for application of patching material, the patching material itself, and practices used in administration of the patching program. The equipment changes include a pusher machine ram-mounted roof patching unit and a new type of patching buggy for use with materials which tend to settle or cake. New materials have been formulated which develop a ceramic bond on the oven refractories and provide superior adherance. Battery Temperature Profiles, Charging Surveys, and Stack Observation Reports are used on a regular basis to identify critical areas for patching beyond those which can be identified by operating personnel on an incidental basis. This paper reviews each of these improvements in Clairton's patching program in terms of the equipment, materials, and practices per se and also discusses the results of implementing these changes.

  19. Spectroscopic Investigation of Surface Dependent Acid-base Property of Ceria Nanoshapes

    DOE PAGESBeta

    Wu, Zili; Mann, Amanda K; Li, Meijun; Overbury, Steven

    2015-01-01

    In addition to their well-known redox character, the acid-base property is another interesting aspect of ceria-based catalysts. Herein, the effect of surface structure on the acid-base property of ceria was studied in detail by utilizing ceria nanocrystals with different morphologies (cubes, octahedra and rods) that exhibit crystallographically well-defined surface facets. The nature, type, strength and amount of acid and base sites on these ceria nanoshapes were investigated via in situ IR spectroscopy combined with various probe molecules. Pyridine adsorption shows the presence of Lewis acid sites (Ce cations) on the ceria nanoshapes. These Lewis acid sites are relatively weak andmore » similar in strength among the three nanoshapes according to the probing by both pyridine and acetonitrile. Both Br nsted (hydroxyl group) and Lewis (surface lattice oxygen) base sites are present on the ceria nanoshapes as probed by CO2 adsorption. CO2 and chloroform adsorption indicate that the strength and amount of the Lewis base sites are shape dependent: rods > cubes > octahedra. The weak and strong surface dependence of the acid and base sites, respectively, are a result of interplay between the surface structure dependent coordination unsaturation status of the Ce cations and O anions and the amount of defect sites on the three ceria nanoshapes. Furthermore, it was found that the nature of the acid-base sites of ceria can be impacted by impurities, such as Na and P residues that result from their use as structure-directing reagent in the hydrothermal synthesis of the ceria nanocrystals. This observation calls for precaution in interpreting the catalytic behavior of nanoshaped ceria where trace impurities may be present.« less

  20. Mechanochemical approach for selective deactivation of external surface acidity of ZSM-5 zeolite catalyst.

    PubMed

    Inagaki, Satoshi; Sato, Koki; Hayashi, Shunsuke; Tatami, Junichi; Kubota, Yoshihiro; Wakihara, Toru

    2015-03-01

    The acid sites associated with the external surface of zeolite particles are responsible for undesirable consecutive reactions, such as isomerization, alkylation, and oligomerization, resulting in a lower selectivity to a target product; therefore, the selective modification (deactivation) of the external surface of zeolite particles has been an important issue in zeolite science. Here, a new method for surface deactivation of zeolite catalyst was tested via a mechanochemical approach using powder composer. Postsynthetic mechanochemical treatment of ZSM-5 zeolite causes a selective deactivation of catalytically active sites existing only on the external surface, as a potentially useful catalyst for highly selective production of p-xylene. PMID:25654542

  1. Porous structure and surface chemistry of phosphoric acid activated carbon from corncob

    NASA Astrophysics Data System (ADS)

    Sych, N. V.; Trofymenko, S. I.; Poddubnaya, O. I.; Tsyba, M. M.; Sapsay, V. I.; Klymchuk, D. O.; Puziy, A. M.

    2012-11-01

    Active carbons have been prepared from corncob using chemical activation with phosphoric acid at 400 °C using varied ratio of impregnation (RI). Porous structure of carbons was characterized by nitrogen adsorption and scanning electron microscopy. Surface chemistry was studied by IR and potentiometric titration method. It has been shown that porosity development was peaked at RI = 1.0 (SBET = 2081 m2/g, Vtot = 1.1 cm3/g), while maximum amount of acid surface groups was observed at RI = 1.25. Acid surface groups of phosphoric acid activated carbons from corncob includes phosphate and strongly acidic carboxylic (pK = 2.0-2.6), weakly acidic carboxylic (pK = 4.7-5.0), enol/lactone (pK = 6.7-7.4; 8.8-9.4) and phenol (pK = 10.1-10.7). Corncob derived carbons showed high adsorption capacity to copper, especially at low pH. Maximum adsorption of methylene blue and iodine was observed for carbon with most developed porosity (RI = 1.0).

  2. Measuring the sticking of mefenamic acid powders on stainless steel surface.

    PubMed

    Wang, Zihua; Shah, Umang V; Olusanmi, Dolapo; Narang, Ajit S; Hussain, Munir A; Gamble, John F; Tobyn, Michael J; Heng, Jerry Y Y

    2015-12-30

    This study proposes an approach for quantifying the amount of pharmaceutical powder adhering (quality attribute) to the metals surfaces. The effect of surface roughness (detrimental attribute) on the amount of powder sticking to a stainless steel surface for a model pharmaceutical material is also qualitatively determined. Methodology to quantify powder adhesion to surfaces utilises a texture analyser and HPLC. The approach was validated to qualitatively investigate effect of metal surface roughness on adhesion of mefenamic acid. An increase in metal surface roughness resulted in an increase in cohesion. By increasing the average roughness from 289nm to 407nm, a 2.5 fold increase in amount adhering to metal was observed, highlighting the role of surface roughness on adhesion. The simplicity in experimental design with no requirement of specialised equipment and operational ease makes the approach very easy to adopt. Further, ease in interpreting results makes this methodology very attractive. PMID:26456293

  3. Tribological properties of boric acid and boric-acid-forming surfaces: Part 2, Formation and self-lubrication mechanisms of boric acid films on boron- and boric-oxide-containing surfaces

    SciTech Connect

    Erdemir, A.; Fenske, G.R.; Erck, R.A.; Nichols, F.A.; Busch, D.

    1990-01-01

    This paper describes the formation and self-lubricating mechanisms of boric acid films on boron- and boric oxide-containing surfaces. As reported in part I, boric acid, owing to a layered triclinic crystal structure and weak interlayer bonds, enjoys an unusual lubrication capability. RF-magnetron sputtering and vacuum evaporation techniques were used to produce thin coatings of boron and boric oxides on steel substrates. The results of tribological experiments indicate that the room temperature friction coefficient of tribosystems that include boron and/or boric oxide coatings ranges from 0.05 to 0.07, depending on the coating type. Laser-Raman spectroscopy of these surfaces revealed that this low friction is associated with a thin boric acid film that forms on the surfaces of these coatings. The fabrication and potential importance of boric acid and boric acid-forming surfaces for practical applications are enumerated. Surface engineering of tribomaterials, such as these demonstrated in this paper, is suggested as a new lubrication concept for use in present and future tribological industries. 16 refs.

  4. Glucose selective surface plasmon resonance-based bis-boronic acid sensor.

    PubMed

    Stephenson-Brown, Alex; Wang, Hui-Chen; Iqbal, Parvez; Preece, Jon A; Long, Yitao; Fossey, John S; James, Tony D; Mendes, Paula M

    2013-12-01

    Saccharides - a versatile class of biologically important molecules - are involved in a variety of physiological and pathological processes, but their detection and quantification is challenging. Herein, surface plasmon resonance and self-assembled monolayers on gold generated from bis-boronic acid bearing a thioctic acid moiety, whose intramolecular distance between the boronic acid moieties is well defined, are shown to detect d-glucose with high selectivity, demonstrating a higher affinity than other saccharides probed, namely d-galactose, d-fructose and d-mannose. PMID:24151633

  5. Acidity-Facilitated Mobilization of Surface Clay Colloid from Natural Sand Medium

    NASA Astrophysics Data System (ADS)

    Huang, Y.; Wang, C.; Mohanty, B. P.

    2010-12-01

    Colloid mobilization and migration in a soil system has attracted increasing scrutiny for its role in facilitating colloid-borne transport of contaminants in the environments. In many previous studies, pH was evoked as a major factor in mobilizing surface colloids through inducing favorable surface charge and electrostatic conditions. The possible direct role of acidity with H+ as a chemical agent has remained largely obscured behind the indirect role of pH. In this study, we demonstrated through column flow-through tests that cyclical elution of natural sand media with weak acid and base solutions can greatly facilitate detachment and transport of surface clay colloids. We found that while elevating pH to an alkaline condition helped release the loosely-attached surface clays, a pretreatment with H+ could facilitate the mobilization of chemically-bonded clay colloids through lysing of labile Ca and Mg ions. A quantitative relation was observed that 1 mmol H+ could lyse about 0.5 mmol Ca2+ and Mg2+ and subsequently resulted in a release of about 1,200 mg clay during base elution when repulsive force between particles dominated. Natural organic acids such as citric acid and acetic acid in environment-relevant low concentrations (<1mM and pH>5.0) were as effective as HCl with a stronger acidic condition. The small mass ratio of Ca and Mg over colloid released and the nature of weak acid used suggest that the mobilization was less likely due to dissolution of cement casing than lysing of labile interstitial Ca and Mg by H+, which severed Ca and Mg bridging bonds between particles. Natural acidity is generated in abundance from various bio- and geochemical processes; e.g., many plants produce citric acid through citric acid cycle metabolism; biodegradation of dead organic matter forms humic acids. We postulate that natural proton dynamics in tendon with pH oscillation accompanied with various soil biogeochemical processes could play a major role in subsurface clay

  6. Characterizing the molecular order of phosphonic acid self-assembled monolayers on indium tin oxide surfaces.

    PubMed

    Losego, Mark D; Guske, Joshua T; Efremenko, Alina; Maria, Jon-Paul; Franzen, Stefan

    2011-10-01

    Self-assembled monolayers (SAMs) of alkanephosphonic acids with chain lengths between 8 and 18 carbon units were formed on thin films of indium tin oxide (ITO) sputter-deposited on silicon substrates with 400 nm thermally grown SiO(2). The silicon substrates, while not intended for use in near-IR or visible optics applications, do provide smooth surfaces that permit systematic engineering of grain size and surface roughness as a function of the sputter pressure. Argon sputter pressures from 4 to 20 mTorr show systematic changes in surface morphology ranging from smooth, micrometer-sized grain structures to <50 nm grains with 3× higher surface roughness. Near-edge X-ray absorption fine structure (NEXAFS) spectroscopy experiments are conducted for alkanephosphonic acids deposited on these wide range of ITO surfaces to evaluate the effects of these morphological features on monolayer ordering. Results indicate that long-chain SAMs are more highly ordered, and have a smaller tilt angle, than short-chain SAMs. Surprisingly, the 1-octadecyl phosphonic acids maintain their order as the lateral grain dimensions of the ITO surface shrink to ∼50 nm. It is only when the ITO surface roughness becomes greater than the SAM chain length (∼15 Å) that SAMs are observed to become relatively disordered. PMID:21863828

  7. Direct monophasic replacement of fatty acid by DMSA on SPION surface

    NASA Astrophysics Data System (ADS)

    Gogoi, M.; Deb, P.; Vasan, G.; Keil, P.; Kostka, A.; Erbe, A.

    2012-10-01

    Tailoring the surface and understanding the surface characteristics is necessary for biomedical applications of superparamagnetic nanoparticles. In this paper, superparamagnetic iron oxide nanoparticles (SPIONs) were prepared by thermal decomposition of iron nitrate in presence of stearic acid as surfactant. Due to the multilayer organization of surfactant molecules over the nanoparticle surface, the surface potential can be tuned by pH changes and hence the nanoparticles can be made dispersible in nonpolar as well as in polar solvents. We have presented a simple, facile procedure for controlled replacement of stearic acid from maghemite surface and subsequent derivatization by biocompatible dimercaptosuccinic acid (DMSA) to obtain ultrastable hydrophilic nanoparticles with unaltered morphology, phase and properties. The surface chemistry of the functionalized SPIONs was analyzed by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA) and X-ray photoelectron spectroscopy (XPS) revealing the presence of bound and unbound thiol groups and disulfides, leading to its prolonged stability in aqueous medium. The consequence of spatially selective functionalization on the stability and solubility of surface hydrophilic SPION has also been realized.

  8. Cell surface changes in Pseudomonas aeruginosa PAO4069 in response to treatment with 6-aminopenicillanic acid.

    PubMed Central

    Godfrey, A J; Bryan, L E

    1989-01-01

    Pseudomonas aeruginosa PAO4096 was induced for beta-lactamases with 6-aminopenicillanic acid. Surface changes concomitant with beta-lactamase induction were monitored. The surface hydrophobicity of the culture increased during exposure to 6-aminopenicillanic acid. The increase was associated with a change in the distribution of the O antigen in the lipopolysaccharide of treated cells. The hydrophobicity change was reversible and partially inhibited by depressed protein synthesis. The susceptibility of induced cells to rifampin was increased transiently, suggesting increased permeability of the induced cells. Images PMID:2554796

  9. Heterogeneous chemical reaction of chlorine nitrate and water on sulfuric-acid surfaces at room temperature

    NASA Astrophysics Data System (ADS)

    Rossi, Michel J.; Malhotra, Ripudaman; Golden, David M.

    1987-02-01

    It has been demonstrated that the reaction between gaseous chlorine nitrate and water on room temperature liquid sulfuric acid (95.6%) surfaces yields hypochlorous acid in the gas phase. First-order loss rate constants for chlorine nitrate (equivalent to a value of the sticking coefficient γ = 3.2 × 10-4) have been determined. This value is five orders-of-magnitude greater than reported values on similar areas of more inert surfaces. Application of results of this type to stratospheric models must await ongoing studies at lower temperatures.

  10. Exogenous pigment in Peyer's patches

    SciTech Connect

    Shepherd, N.A.; Crocker, P.R.; Smith, A.P.; Levison, D.A.

    1987-01-01

    Dark brown granular pigment was found consistently in macrophages in the deep aspect of adult Peyer's patches. Tissue sections from intestinal resections of 35 patients with a variety of pathologic diagnoses and of seven postmortem cases with no evidence of gastrointestinal disease were examined for the presence of this pigment. It was found in all patients over the age of 6 years (34 cases) but was not found in any children below that age (eight cases). Scanning electron microscopy with secondary and backscattered electron imaging and x-ray energy spectroscopy were performed on routine histologic sections. The pigmented macrophages contained aluminum and silicon, diffusely present throughout the cytoplasm, and numerous discrete foci of titanium. Pigment containing these same elements has also been found around dilated submucosal lymphatics, in mesenteric lymph nodes, and in some transmural inflammatory aggregates of Crohn's disease. The pigment probably is derived from the diet and actively taken up by Peyer's patches, which are able to incorporate inert particulate matter.

  11. Gold nanoparticles with different amino acid surfaces: serum albumin adsorption, intracellular uptake and cytotoxicity.

    PubMed

    Cai, Huanxin; Yao, Ping

    2014-11-01

    Gold nanoparticles with aspartate, glycine, leucine, lysine, and serine surfaces were produced from the mixed solutions of HAuCl4 and respective amino acids via UV irradiation. The amino acids bind to the nanoparticle surfaces via amine groups and their carboxylic groups extend out to stabilize the nanoparticles. The nanoparticles have diameters of 15-47 nm in pH 7.4 aqueous solution and have diameters of 62-73 nm after 48 h incubation in cell culture containing serum. The nanoparticles adsorb human and bovine serum albumins on their surfaces by specific interactions, characterized by the intrinsic fluorescence quenching of the albumins. The albumin adsorption effectively decreases the aggregation of the nanoparticles in cell culture and also decreases the intracellular uptake of the nanoparticles. The gold nanoparticles produced from leucine and lysine, which have amphiphilic groups on their surfaces, present better biocompatibility than the other gold nanoparticles. PMID:25466455

  12. Decoupling the contribution of dispersive and acid-base components of surface energy on the cohesion of pharmaceutical powders.

    PubMed

    Shah, Umang V; Olusanmi, Dolapo; Narang, Ajit S; Hussain, Munir A; Tobyn, Michael J; Heng, Jerry Y Y

    2014-11-20

    This study reports an experimental approach to determine the contribution from two different components of surface energy on cohesion. A method to tailor the surface chemistry of mefenamic acid via silanization is established and the role of surface energy on cohesion is investigated. Silanization was used as a method to functionalize mefenamic acid surfaces with four different functional end groups resulting in an ascending order of the dispersive component of surface energy. Furthermore, four haloalkane functional end groups were grafted on to the surface of mefenamic acid, resulting in varying levels of acid-base component of surface energy, while maintaining constant dispersive component of surface energy. A proportional increase in cohesion was observed with increases in both dispersive as well as acid-base components of surface energy. Contributions from dispersive and acid-base surface energy on cohesion were determined using an iterative approach. Due to the contribution from acid-base surface energy, cohesion was found to increase ∼11.7× compared to the contribution from dispersive surface energy. Here, we provide an approach to deconvolute the contribution from two different components of surface energy on cohesion, which has the potential of predicting powder flow behavior and ultimately controlling powder cohesion. PMID:25223493

  13. Electrochemical cell with a cadmium patch electrode

    SciTech Connect

    Ames, A.E.; Bloom, S.M.; Hoffman, A.; Norland, K.

    1980-01-22

    A cadmium patch laminar electrode, comprising a dispersion of particulate cadmium in a binder matrix on a conductive plastic substrate is prepared by contacting a zinc patch electrode comprising a dispersion of particulate zinc in a binder matrix on a conductive plastic substrate with an aqueous solution of a cadmium salt. The cadmium patch electrode can be used in a primary electrochemical cell such as that employing a manganese dioxide cathode and a cadmium chloride electrolyte.

  14. Multi-Mode Broadband Patch Antenna

    NASA Technical Reports Server (NTRS)

    Romanofsky, Robert R. (Inventor)

    2001-01-01

    A multi-mode broad band patch antenna is provided that allows for the same aperture to be used at independent frequencies such as reception at 19 GHz and transmission at 29 GHz. Furthermore, the multi-mode broadband patch antenna provides a ferroelectric film that allows for tuning capability of the multi-mode broadband patch antenna over a relatively large tuning range. The alternative use of a semiconductor substrate permits reduced control voltages since the semiconductor functions as a counter electrode.

  15. Transdermal nicotine patches do not cause clinically significant gastroesophageal reflux or esophageal motor disorders.

    PubMed

    Wright, R A; Goldsmith, L J; Ameen, V; D'Angelo, A; Kirby, S L; Prakash, S

    1999-12-01

    Transdermal nicotine delivery systems are widely used in smoking cessation. The purpose of this study was to determine whether common symptoms of pyrosis and dyspepsia associated with these patches are related to gastroesophageal reflux or esophageal dysmotility. Twenty-seven paid volunteer cigarette smokers (> 15 cigarettes/day) without symptomatic gastroesophageal reflux disease participated in this single-blinded, placebo-controlled study. Twenty subjects completed the study. Subjects underwent three sequential 24-h intraesophageal pH/motor studies (Synectics model T32342084, Shore View, MN). The pH/motility probe was positioned 5 cm above the manometrically determined LES. A placebo patch was applied for the first 24-h study and a 15-mg nicotine patch (Nicotrol) was applied for the initial 16 h (removed for remaining 8 h) of the second 24-h period. A 21-mg nicotine patch (Nicoderm) was applied for another 24-h study period. All subjects consumed an identical, defined diet documented by meal receipts, and refrained from smoking and tobacco use throughout the study periods (CO breath test confirmation). The Wilcoxon, paired t-test, exact McNemar statistical methods were used. The results showed that there were no significant differences in reflux symptoms (pyrosis, chest pain, nausea, dysphagia), supine gastroesophageal reflux (number of episodes, duration, or cumulative acid exposure), or the total number of reflux episodes between placebo and nicotine patch treatment periods. The number of post-prandial upright acid reflux episodes (p = 004) and number of upright acid reflux episodes lasting more than 5 min (p = 0.007) were statistically higher with the placebo patch compared to the active nicotine patches. No differences in intraesophageal pH or motility indices were noted between the two transdermal nicotine patches (Nicotrol, Nicoderm). It was concluded that dyspeptic symptoms in subjects utilizing transdermal nicotine patches are not related to

  16. pH dependence of methyl phosphonic acid, dipicolinic acid, and cyanide by surface-enhanced Raman spectroscopy

    NASA Astrophysics Data System (ADS)

    Farquharson, Stuart; Gift, Alan; Maksymiuk, Paul; Inscore, Frank E.; Smith, Wayne W.

    2004-03-01

    U.S. and Coalition forces fighting terrorism in Afghanistan and Iraq must consider a wide range of attack scenarios in addition to car bombings. Among these is the intentional poisoning of water supplies to obstruct military operations. To counter such attacks, the military is developing portable analyzers that can identify and quantify potential chemical agents in water supplies at microgram per liter concentrations within 10 minutes. To aid this effort we have been investigating the value of a surface-enhanced Raman spectroscopy based portable analyzer. In particular we have been developing silver-doped sol-gels to generate SER spectra of chemical agents and their hydrolysis products. Here we present SER spectra of methyl phosphonic acid and cyanide as a function of pH, an important factor affecting quantitation measurements, which to our knowledge has not been examined. In addition, dipicolinic acid, a chemical signature associated with anthrax-causing spores, is also presented.

  17. Photoinduced coupling and adsorption of caffeic acid on silver surface studied by surface-enhanced Raman spectroscopy

    NASA Astrophysics Data System (ADS)

    Sánchez-Cortés, S.; García-Ramos, J. V.

    1999-12-01

    The effect of light on the caffeic acid (CA) oxidative coupling is studied in aqueous solution and on silver by surface-enhanced Raman spectroscopy (SERS). CA can polymerize in aqueous solution or on a metal surface through an oxidative mechanism involving the formation of the corresponding quinone giving rise to characteristic Raman features in each case. We show here that the effect of light in relation to this oxidative coupling is crucial taking place mainly in the solution bulk. The products derived from such polymerization can then adsorb on the silver surface employed for SERS measurements, thus allowing its detection by Raman spectroscopy. The influence of irradiation time and the wavelength of the light employed for the photoinduced coupling was investigated.

  18. Transdermal fentanyl patches in small animals.

    PubMed

    Hofmeister, Erik H; Egger, Christine M

    2004-01-01

    Fentanyl citrate is a potent opioid that can be delivered by the transdermal route in cats and dogs. Publications regarding transdermal fentanyl patches were obtained and systematically reviewed. Seven studies in cats and seven studies in dogs met the criteria for inclusion in this review. Dogs achieved effective plasma concentrations approximately 24 hours after patch application. Cats achieved effective plasma concentrations 7 hours after patch application. In dogs, transdermal fentanyl produced analgesia for up to 72 hours, except for the immediate 0- to 6-hour postoperative period. In cats, transdermal fentanyl produced analgesia equivalent to intermittent butorphanol administration for up to 72 hours following patch application. PMID:15533967

  19. Effect of Citric Acid and Ethylenediaminetetraacetic Acid on the Surface Morphology of Young and Old Root Dentin

    PubMed Central

    Scelza, Miriam Zaccaro; de Noronha, Fernando; da Silva, Licinio Esmeraldo; Maurício, Marcos; Gallito, Marco Antonio; Scelza, Pantaleo

    2016-01-01

    Introduction: The aim of this in vitro study was to evaluate the effect of 10% citric acid and 17% ethylenediaminetetraacetic acid (EDTA) irrigating solutions on the surface morphology of young and old root dentin by determining the number and diameter of dentinal tubules using scanning electron microscopy (SEM). Methods and Materials: Fifty healthy human teeth collected from young (≤30 years) and old (≥60 years) individuals (n=25) were first prepared with a Largo bur #2 to produce smear layer on the root canal surface. Subsequently, the crowns and the root middle and apical thirds were sectioned and removed, and the cervical thirds were sectioned vertically in the buccal-lingual direction into two equal halves. The obtained samples were then immersed in 2.5% sodium hypochlorite for 30 min and randomly separated into two treatment groups for each age group. In each age group, ten samples were selected as controls and did not receive any type of treatment. The rest of the specimens were then rinsed, dried and treated for 4 min with 10% citric acid or 17% EDTA. The samples were then assessed with SEM regarding the number and diameter of dentinal tubules. All data were assessed using Student’s t-test. The level of significance was set at 0.05. Results: Regardless of the type of treatment, no significant differences were observed in the number of open tubules between the young and old root dentin (P>0.05). Nonetheless, the diameter of the tubules in the old root dentin was larger when 17% EDTA was used (P<0.05). Both, young and old root dentin did not differ with the 10% citric acid treatment (P>0.05). Conclusion: The results showed that 17% EDTA treatment induced a significant demineralization in old root dentin. PMID:27471529

  20. Formulation, physicochemical characterization, and in vitro study of chitosan/HPMC blends-based herbal blended patches.

    PubMed

    Suksaeree, Jirapornchai; Monton, Chaowalit; Madaka, Fameera; Chusut, Tun; Saingam, Worawan; Pichayakorn, Wiwat; Boonme, Prapaporn

    2015-02-01

    The current work prepared chitosan/hydroxypropyl methylcellulose (HPMC) blends and studied the possibility of chitosan/HPMC blended patches for Zingiber cassumunar Roxb. The blended patches without/with crude Z. cassumunar oil were prepared by homogeneously mixing the 3.5% w/v of chitosan solution and 20% w/v of HPMC solution, and glycerine was used as plasticizer. Then, they were poured into Petri dish and produced the blended patches in hot air oven at 70 ± 2°C. The blended patches were tested and evaluated by the physicochemical properties: moisture uptake, swelling ratio, erosion, porosity, Fourier transform infrared spectroscopy, differential scanning calorimetry, and X-ray diffraction, and photographed the surface and cross-section morphology under SEM technique. Herbal blended patches were studied by the in vitro release and skin permeation of active compound D. The blended patches could absorb the moisture and became hydrated patches that occurred during the swelling of blended patches. They were eroded and increased by the number of porous channels to pass through out for active compound D. In addition, the blended patches indicated the compatibility of the blended ingredients and homogeneous smooth and compact. The blended patches made from chitosan/HPMC blends provide a controlled release and skin permeation behavior of compound D. Thus, the blended patches could be suitably used for herbal medicine application. PMID:25233803

  1. Molecular modeling of the surface charging of hematite. I. The calculation of proton affinities and acidities on a surface

    NASA Astrophysics Data System (ADS)

    Wasserman, Evgeny; Rustad, James R.; Felmy, Andrew R.

    1999-03-01

    Calculation of the energy of a charged defect on a surface in supercell geometry is discussed. An important example of such a calculation is evaluation of surface proton affinities and acidities, as adding or removing a proton creates a charged unit cell. Systems with periodic boundary conditions in three spatial directions and a vacuum gap between slabs are demonstrated to be inadequate for unit cells having non-zero ionic charge and uniform neutralizing background. In such a system the calculated energy diverges linearly with the thickness of the vacuum gap. A system periodic in two directions and finite in the direction perpendicular to the surface (2-D PBC) with the neutralizing background distributed as the surface charge density is free from this problem. Furthermore, the correction for the interaction of the charged defect with its own translational images is needed to speed up the convergence to the infinite dilution limit. The expression for the asymptotic correction for the energy of interaction of a charged defect with its translational images in 2-D PBC geometry has been developed in this study. The asymptotic correction is evaluated as the interaction energy of a 2-D translationally periodic array of point charges located above and below the plate of non-uniform dielectric. This is a generalization of the method of M. Leslie and M.J. Gillan [J. Phys. C, 18 (1985) 973] for the calculation of the energy of a charged defect in bulk crystals. The usefulness of this correction was demonstrated on two test cases involving the calculation of proton affinity and acidity at the (012) surface of hematite. The proposed method is likely to be important in ab initio calculations of the energy effect of the surface protonation reactions, where computational limitations dictate a small size for the unit cell.

  2. Surface characterization of alkali- and heat-treated Ti with or without prior acid etching

    NASA Astrophysics Data System (ADS)

    An, Sang-Hyun; Matsumoto, Takuya; Miyajima, Hiroyuki; Sasaki, Jun-Ichi; Narayanan, Ramaswamy; Kim, Kyo-Han

    2012-03-01

    Titanium and its alloys are used as implant materials in dental and orthopaedic applications. The material affinities to host bone tissue greatly concern with the recovery period and good prognosis. To obtain a material surface having excellent affinity to bone, acid etching prior to alkali- and heat-treatment of Ti was conducted. The surface characteristics of the prepared sample indicated that the roughness as well as the wettability increased by pre-etching. Bone-like apatite was formed on pre-etched, alkali- and heat-treated Ti surface in simulated body fluid (SBF) within 3 days, while it takes 5 days on the solely alkali- and heat-treated surface. Osteoblastic cells showed better compatibility on the per-etched surface compared to the pure Ti surface or alkali- and heat-treated surface. Moreover, the pre-etched surface showed better pull-off tensile adhesion strength against the deposited apatite. Thus, acid etching prior to alkali- and heat-treatment would be a promising method for enhancing the affinity of Ti to host bone tissue.

  3. Surface lysine residues modulate the collisional transfer of fatty acid from adipocyte fatty acid binding protein to membranes.

    PubMed

    Herr, F M; Matarese, V; Bernlohr, D A; Storch, J

    1995-09-19

    The transfer of unesterified fatty acids (FA) from adipocyte fatty acid binding protein (A-FABP) to phospholipid membranes is proposed to occur via a collisional mechanism involving transient ionic and hydrophobic interactions [Wootan & Storch (1994) J. Biol. Chem. 269, 10517-10523]. In particular, it was suggested that membrane acidic phospholipids might specifically interact with basic residues on the surface of A-FABP. Here we addressed whether lysine residues on the surface of the protein are involved in this collisional transfer mechanism. Recombinant A-FABP was acetylated to neutralize all positively charged surface lysine residues. Protein fluorescence, CD spectra, and chemical denaturant data indicate that acetylation did not substantially alter the conformational integrity of the protein, and nearly identical affinities were obtained for binding of the fluorescently labeled FA [12-(9-anthroyloxy)oleate] to native and acetylated protein. Transfer of 2-(9-anthroyloxy)palmitate (2AP) from acetylated A-FABP to small unilamellar vesicles (SUV) was 35-fold slower than from native protein. In addition, whereas the 2AP transfer rate from native A-FABP was directly dependent on SUV concentration, 2AP transfer from acetylated protein was independent on the concentration of acceptor membranes. Factors which alter aqueous-phase solubility of FA, such as ionic strength and acyl chain length and saturation, affected the AOFA transfer rate from acetylated but not native A-FABP. Finally, an increase in the negative charge density of the acceptor SUV resulted in a marked increase in the rate of transfer from native A-FABP but did not increase the rate from acetylated A-FABP.(ABSTRACT TRUNCATED AT 250 WORDS) PMID:7547918

  4. Shock synthesis of amino acids from impacting cometary and icy planet surface analogues

    NASA Astrophysics Data System (ADS)

    Martins, Zita; Price, Mark C.; Goldman, Nir; Sephton, Mark A.; Burchell, Mark J.

    2013-12-01

    Comets are known to harbour simple ices and the organic precursors of the building blocks of proteins--amino acids--that are essential to life. Indeed, glycine, the simplest amino acid, was recently confirmed to be present on comet 81P/Wild-2 from samples returned by NASA's Stardust spacecraft. Impacts of icy bodies (such as comets) onto rocky surfaces, and, equally, impacts of rocky bodies onto icy surfaces (such as the jovian and saturnian satellites), could have been responsible for the manufacture of these complex organic molecules through a process of shock synthesis. Here we present laboratory experiments in which we shocked ice mixtures analogous to those found in a comet with a steel projectile fired at high velocities in a light gas gun to test whether amino acids could be produced. We found that the hypervelocity impact shock of a typical comet ice mixture produced several amino acids after hydrolysis. These include equal amounts of D- and L-alanine, and the non-protein amino acids α-aminoisobutyric acid and isovaline as well as their precursors. Our findings suggest a pathway for the synthetic production of the components of proteins within our Solar System, and thus a potential pathway towards life through icy impacts.

  5. Biocatalyzed approach for the surface functionalization of poly(L-lactic acid) films using hydrolytic enzymes.

    PubMed

    Pellis, Alessandro; Acero, Enrique Herrero; Weber, Hansjoerg; Obersriebnig, Michael; Breinbauer, Rolf; Srebotnik, Ewald; Guebitz, Georg M

    2015-09-01

    Poly(lactic acid) as a biodegradable thermoplastic polyester has received increasing attention. This renewable polyester has found applications in a wide range of products such as food packaging, textiles and biomedical devices. Its major drawbacks are poor toughness, slow degradation rate and lack of reactive side-chain groups. An enzymatic process for the grafting of carboxylic acids onto the surface of poly(L-lactic acid) (PLLA) films was developed using Candida antarctica lipase B as a catalyst. Enzymatic hydrolysis of the PLLA film using Humicola insolens cutinase in order to increase the number of hydroxyl and carboxylic groups on the outer polymer chains for grafting was also assessed and showed a change of water contact angle from 74.6 to 33.1° while the roughness and waviness were an order of magnitude higher in comparison to the blank. Surface functionalization was demonstrated using two different techniques, (14) C-radiochemical analysis and X-ray photoelectron spectroscopy (XPS) using (14) C-butyric acid sodium salt and 4,4,4-trifluorobutyric acid as model molecules, respectively. XPS analysis showed that 4,4,4-trifluorobutyric acid was enzymatically coupled based on an increase of the fluor content from 0.19 to 0.40%. The presented (14) C-radiochemical analyses are consistent with the XPS data indicating the potential of enzymatic functionalization in different reaction conditions. PMID:25963883

  6. REDUCTION IN ACIDITY PARAMETERS 6 YEARS AFTER SURFACE APPLICATION OF CA-CONTAINING BY-PRODUCTS

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Mechanical incorporation of limestone in hill lands can lead to soil loss. An alternative is to surface-apply Ca sources that are more soluble such as coal combustion by-product (CCB) gypsum. Gypsum is known to improve grass yield on acid soil for several years after application, but longevity of ...

  7. MUTAGENICITY AND DISINFECTION BY-PRODUCTS IN SURFACE DRINKING WATER DISINFECTED WITH PERACETIC ACID

    EPA Science Inventory

    The aims of this research were to study the influence of peracetic acid (PAA) on the formation of mutagens in surface waters used for human consumption and to assess its potential application for the disinfection of drinking water. The results obtained using PAA were compared to ...

  8. Preparation and Ion Recognition Characteristics of a Trichloroacetic Acid Surface-Imprinted Material.

    PubMed

    Gao, Baojiao; Zhang, Tintin; Chen, Tao

    2015-05-01

    In this work, a trichloroacetic acid (TCAA) surface-imprinted material with high performance was prepared. In an aqueous solution, the molecules of the cationic monomer acryloyloxyethyl-trimethyl ammonium chloride (DAC) arranged around the template TCAA anion via electrostatic interaction. By initiating of the surface-initiating system of -NH2/S2O8(2-), the graft/cross-linking polymerization of DAC and the crosslinker N,N'-Methylenebisacrylamide and the TCAA surface-imprinting were simultaneously carried out on SiO2 particles, forming TCAA anion surface-imprinted material IIP-PDAC/ SiO2. With monochloroacetic acid (MCAA) and phenylacetic acid (PAA) as two contrast acids, the recognition character of the imprinted material IIP-PDAC/SiO2 was investigated. This imprinted material possesses special recognition selectivity and excellent binding affinity for TCAA anion. The binding amount of IIP-PDAC/SiO2 particles for TCAA reaches 0.93 mmol/g, whereas their binding amounts for MCAA and PAA are only 0.48 mmol/g and 0.15 mmol/g, respectively. The selectivity coefficients of IIP-PDAC/SiO2 for TCAA relative to MCAA and PAA anions are 3.61 and 9.12, respectively. PMID:26460460

  9. Type 304L stainless steel surface microstructure: Performance in hydride storage and acid cleaning

    SciTech Connect

    Clark, E.A.

    1994-07-01

    The performance of stainless steel as the container in hydride storage bed systems has been evaluated, primarily using scanning electron microscopy. No adverse reaction between Type 304L stainless steel and either LaNi{sub 5{minus}x},Al{sub x}, or palladium supported on Kieselguhr granules (silica) during exposure in hydrogen was found in examination of retired prototype storage bed containers and special compatibility test samples. Intergranular surface ditching, observed on many of the stainless steel surfaces examined, was shown to result from air annealing and acid cleaning of stainless steel during normal fabrication. The ditched air annealed and acid cleaned stainless steel samples were more resistant to subsequent acid attack than vacuum annealed or polished samples without ditches.

  10. Amino Acid-Based Zwitterionic Polymer Surfaces Highly Resist Long-Term Bacterial Adhesion.

    PubMed

    Liu, Qingsheng; Li, Wenchen; Wang, Hua; Newby, Bi-Min Zhang; Cheng, Fang; Liu, Lingyun

    2016-08-01

    The surfaces or coatings that can effectively suppress bacterial adhesion in the long term are of critical importance for biomedical applications. Herein, a group of amino acid-based zwitterionic polymers (pAAZ) were investigated for their long-term resistance to bacterial adhesion. The polymers were derived from natural amino acids including serine, ornithine, lysine, aspartic acid, and glutamic acid. The pAAZ brushes were grafted on gold via the surface-initiated photoiniferter-mediated polymerization (SI-PIMP). Results show that the pAAZ coatings highly suppressed adsorption from the undiluted human serum and plasma. Long-term bacterial adhesion on these surfaces was investigated, using two kinds of representative bacteria [Gram-positive Staphylococcus epidermidis and Gram-negative Pseudomonas aeruginosa] as the model species. Results demonstrate that the pAAZ surfaces were highly resistant to bacterial adhesion after culturing for 1, 5, 9, or even 14 days, representing at least 95% reduction at all time points compared to the control unmodified surfaces. The bacterial accumulation on the pAAZ surfaces after 9 or 14 days was even lower than on the surfaces grafted with poly[poly(ethyl glycol) methyl ether methacrylate] (pPEGMA), one of the most common antifouling materials known to date. The pAAZ brushes also exhibited excellent structural stability in phosphate-buffered saline after incubation for 4 weeks. The bacterial resistance and stability of pAAZ polymers suggest they have good potential to be used for those applications where long-term suppression to bacterial attachment is desired. PMID:27397718

  11. Tribological properties of boric acid and boric acid forming surfaces: Part 1, Crystal chemistry and self-lubricating mechanism of boric acid

    SciTech Connect

    Erdemir, A.

    1990-01-01

    An in-depth understanding of the atomic-scale structure and chemistry of self-lubricating solids and how they relate to the efficiency and endurance of large-scale tribosystems is critically important. Of particular interest is the utilization of this understanding for the development of mechanistic models that can increase our ability to assess and predict the capabilities of self-lubricating solids. Accordingly, a comprehensive investigation was made of the crystal chemistry and self-lubrication mechanisms of boric acid and boric acid-forming surfaces. In this paper, the fundamentals of the crystal chemistry and the proposed lubrication mechanism of boric acid are described. Pin-on-disk tests performed on cold-pressed boric-acid pins and AISI 52100 steel disks, showed that the friction coefficient of this tribosystem is approximately 0.1. The results of this investigation indicate that boric acid, owing to its unique crystal structure and bond characteristics, is a promising solid lubricant for a wide range of tribological applications. 18 refs., 5 figs.

  12. Folic acid reverses uric acid crystal-induced surface OAT1 internalization by inhibiting RhoA activity in uric acid nephropathy

    PubMed Central

    WU, XINLIN; LIU, JIANXIANG; ZHANG, JIANQING; LIU, HENG; YAN, MIANSHENG; LIANG, BIRONG; XIE, HONGBO; ZHANG, SHIJUN; SUN, BAOGUO; ZHOU, HOUMING

    2016-01-01

    To investigate how organic anion transporter (OAT)-1 is involved in uric acid nephropathy (UAN), a rat model for UAN was established and the serum uric acid, blood urea nitrogen and serum creatinine levels were all measured, and observed to be increased. It was additionally identified that in UAN rats the surface OAT1 expression levels were reduced. By treating HEK cells with monosodium urate (MSU) crystals, it was observed that the cells exhibited a reduction in OAT1 levels. Furthermore, MSU crystals were observed to recruit Ras homolog family member A (RhoA), a small guanosine triphosphatase, to the membrane and activate it. Following RhoA activation, the OAT1 internalization rate was identified to be increased. The dominant-negative RhoA N19 mutation was able to block MSU-induced OAT1 internalization, indicating that the process was RhoA-dependent. Finally, the results indicated that folic acid, a daily nutritional supplement, was capable of rescuing MSU-induced nephropathy and OAT1 internalization. These observations indicated that uric acid crystals were able to reduce the OAT1 membrane distribution through activating RhoA, and that folic acid was capable of preventing MSU-induced OAT1 relocation by inhibiting the RhoA signaling pathway. PMID:26846716

  13. Interaction of Polyelectrolytes with Salivary Pellicles on Hydroxyapatite Surfaces under Erosive Acidic Conditions.

    PubMed

    Delvar, Alice; Lindh, Liselott; Arnebrant, Thomas; Sotres, Javier

    2015-09-30

    The modification of acidic beverage formulations with food-approved, nonhazardous substances with antierosive properties has been identified as a key strategy for counteracting the prevalence of dental erosion, i.e., the acid-induced dissolution of hydroxyapatite (HA, the main mineral component of tooth surfaces). While many of such substances have been reported, very little is known on how they interact with teeth and inhibit their acid-induced dissolution. With the aim of filling this gap in knowledge, we have studied under acidic conditions the interaction between two polyelectrolytes of differing ionic character, carboxymethyl cellulose (CMC) and chitosan, and saliva-coated hydroxyapatite, i.e., a model for the outer surface of teeth. These studies were performed by means of ellipsometry, quartz crystal microbalance with dissipation monitoring, and atomic force microscopy. We also studied, by means of pH variations, how dissolution of saliva-coated HA is affected by including these polyelectrolytes in the erosive solutions. Our results confirm that salivary films protect HA from acid-induced dissolution, but only for a limited time. If the acid is modified with CMC, this polyelectrolyte incorporates into the salivary films prolonging in time their protective function. Eventually, the CMC-modified salivary films are removed from the HA surfaces. From this moment, HA is continuously coated with CMC, but this offers only a weak protection against erosion. When the acid is modified with the cationic chitosan, the polyelectrolyte adsorbs on top of the salivary films. Chitosan-modified salivary films are also eventually replaced by bare chitosan films. In this case both coatings offer a similar protection against HA dissolution, which is nevertheless notably higher than that offered by CMC. PMID:26368580

  14. Investigation of Antifouling Properties of Surfaces Featuring Zwitterionic α-Aminophosphonic Acid Moieties.

    PubMed

    Wagner, Natalie; Zimmermann, Phyllis; Heisig, Peter; Klitsche, Franziska; Maison, Wolfgang; Theato, Patrick

    2015-12-01

    Zwitterionic thin films containing α-amino phosphonic acid moieties were successfully introduced on silicon surfaces and their antifouling properties were investigated. Initially, the substrates were modified with a hybrid polymer, composed of poly(methylsilsesquioxane) (PMSSQ) and poly(4-vinyl benzaldehyde) (PStCHO). Next, a Kabachnik-Fields post-polymerization modification (sur-KF-PMR) of the functionalized aldehyde surfaces was conducted with different amines and dialkyl phosphonates. After subsequent deprotection reaction of dialkyl phosphonates, the obtained zwitterionic surfaces were characterized by various techniques and we found excellent antifouling properties of the resulting films. PMID:26332285

  15. Comparative study of icy patches on comet nuclei

    NASA Astrophysics Data System (ADS)

    Oklay, Nilda; Pommerol, Antoine; Barucci, Maria Antonietta; Sunshine, Jessica; Sierks, Holger; Pajola, Maurizio

    2016-07-01

    Cometary missions Deep Impact, EPOXI and Rosetta investigated the nuclei of comets 9P/Tempel 1, 103P/Hartley 2 and 67P/Churyumov-Gerasimenko respectively. Bright patches were observed on the surfaces of each of these three comets [1-5]. Of these, the surface of 67P is mapped at the highest spatial resolution via narrow angle camera (NAC) of the Optical, Spectroscopic, and Infrared Remote Imaging System (OSIRIS, [6]) on board the Rosetta spacecraft. OSIRIS NAC is equipped with twelve filters covering the wavelength range of 250 nm to 1000 nm. Various filters combinations are used during surface mapping. With high spatial resolution data of comet 67P, three types of bright features were detected on the comet surface: Clustered, isolated and bright boulders [2]. In the visible spectral range, clustered bright features on comet 67P display bluer spectral slopes than the average surface [2, 4] while isolated bright features on comet 67P have flat spectra [4]. Icy patches observed on the surface of comets 9P and 103P display bluer spectral slopes than the average surface [1, 5]. Clustered and isolated bright features are blue in the RGB composites generated by using the images taken in NIR, visible and NUV wavelengths [2, 4]. This is valid for the icy patches observed on comets 9P and 103P [1, 5]. Spectroscopic observations of bright patches on comets 9P and 103P confirmed the existence of water [1, 5]. There were more than a hundred of bright features detected on the northern hemisphere of comet 67P [2]. Analysis of those features from both multispectral data and spectroscopic data is an ongoing work. Water ice is detected in eight of the bright features so far [7]. Additionally, spectroscopic observations of two clustered bright features on the surface of comet 67P revealed the existence of water ice [3]. The spectral properties of one of the icy patches were studied by [4] using OSIRIS NAC images and compared with the spectral properties of the active regions observed

  16. Fabrication of superhydrophobic surface of hierarchical ZnO thin films by using stearic acid

    NASA Astrophysics Data System (ADS)

    Wang, Yanfen; Li, Benxia; Xu, Chuyang

    2012-01-01

    Flower-like hierarchical ZnO microspheres were successfully synthesized by a simple, template-free, and low-temperature aqueous solution route. The morphology and microstructure of the ZnO microspheres were examined by X-ray diffraction, scanning electron microscopy and transmission electron microscopy. The bionic films with hydrophobicity were fabricated by the hierarchical ZnO microspheres modified by stearic acid. It was found that the hydrophobicity of the thin films was very sensitive to the added amount of stearic acid. The thin films modified with 8% stearic acid took on strong superhydrophobicity with a water contact angle (CA) almost to be 178° and weak adhersion. The remarkable superhydrophobicity could be attributed to the synergistic effect of micro/nano hierarchical structure of ZnO and low surface energy of stearic acid.

  17. Transformation of oil patches into spiral arms in compound vortex flow

    NASA Astrophysics Data System (ADS)

    Tatyana, Chaplina

    2010-05-01

    Chaplina T.O. "Transformation of oil patches into spiral arms in compound vortex flow" The transformation of surface oil patch is studied in compound vortex flow. The flow is produced by rotating disk in the cylindrical container partly filled with a homogeneous fluid. The oil patch partly gathers in compact volume at the bottom of a surface trough and the left part forms spiral arms on the free surface. At various modes of fluid rotation the observed pattern of free surface varies. At low frequencies of disk rotation an interface air-liquid insignificantly differs from flat, the whole surface is covered with "come off" small drops of oil. At increase in frequency of disk rotation separate drops come off an external edge of central patch and drift independently over free surface. The separate drops and the arms form "spiral pattern" on a surface of compound vortex. The oil patch fills nearly conic area directly under a fluid-air surface. The viscous lens considerably reduces size of a deflection of a free surface. The surface cavern becomes smooth in liquid-air contact area and on border water-oil. Flow patterns are compared with environmental observations.

  18. Adsorption of peptide nucleic acid and DNA decamers at electrically charged surfaces.

    PubMed Central

    Fojta, M; Vetterl, V; Tomschik, M; Jelen, F; Nielsen, P; Wang, J; Palecek, E

    1997-01-01

    Adsorption behavior of peptide nucleic acid (PNA) and DNA decamers (GTAGATCACT and the complementary sequence) on a mercury surface was studied by means of AC impedance measurements at a hanging mercury drop electrode. The nucleic acid was first attached to the electrode by adsorption from a 5-microliter drop of PNA (or DNA) solution, and the electrode with the adsorbed nucleic acid layer was then washed and immersed in the blank background electrolyte where the differential capacity C of the electrode double layer was measured as a function of the applied potential E. It was found that the adsorption behavior of the PNA with an electrically neutral backbone differs greatly from that of the DNA (with a negatively charged backbone), whereas the DNA-PNA hybrid shows intermediate behavior. At higher surface coverage PNA molecules associate at the surface, and the minimum value of C is shifted to negative potentials because of intermolecular interactions of PNA at the surface. Prolonged exposure of PNA to highly negative potentials does not result in PNA desorption, whereas almost all of the DNA is removed from the surface at these potentials. Adsorption of PNA decreases with increasing NaCl concentration in the range from 0 to 50 mM NaCl, in contrast to DNA, the adsorption of which increases under the same conditions. PMID:9129832

  19. Natural and pyrogenic humic acids at goethite and natural oxide surfaces interacting with phosphate.

    PubMed

    Hiemstra, Tjisse; Mia, Shamim; Duhaut, Pierre-Benoît; Molleman, Bastiaan

    2013-08-20

    Fulvic and humic acids have a large variability in binding to metal (hydr) oxide surfaces and interact differently with oxyanions, as examined here experimentally. Pyrogenic humic acid has been included in our study since it will be released to the environment in the case of large-scale application of biochar, potentially creating Darks Earths or Terra Preta soils. A surface complexation approach has been developed that aims to describe the competitive behavior of natural organic matter (NOM) in soil as well as model systems. Modeling points unexpectedly to a strong change of the molecular conformation of humic acid (HA) with a predominant adsorption in the Stern layer domain at low NOM loading. In soil, mineral oxide surfaces remain efficiently loaded by mineral-protected organic carbon (OC), equivalent with a layer thickness of ≥ ~0.5 nm that represents at least 0.1-1.0% OC, while surface-associated OC may be even three times higher. In natural systems, surface complexation modeling should account for this pervasive NOM coverage. With our charge distribution model for NOM (NOM-CD), the pH-dependent oxyanion competition of the organo-mineral oxide fraction can be described. For pyrogenic HA, a more than 10-fold increase in dissolved phosphate is predicted at long-term applications of biochar or black carbon. PMID:23875678

  20. Improvement of β-TCP/PLLA biodegradable material by surface modification with stearic acid.

    PubMed

    Ma, Fengcang; Chen, Sai; Liu, Ping; Geng, Fang; Li, Wei; Liu, Xinkuan; He, Daihua; Pan, Deng

    2016-05-01

    Poly-l-lactide (PLLA) is a biodegradable polymer and used widely. Incorporation of beta tricalcium phosphate (β-TCP) into PLLA can enhance its osteoinductive properties. But the interfacial layer between β-TCP particles with PLLA matrix is easy to be destroyed due to inferior interfacial compatibility of the organic/inorganic material. In this work, a method of β-TCP surface modification with stearic acid was investigated to improve the β-TCP/PLLA biomaterial. The effects of surface modification on the β-TCP were investigated by FTIR, XPS, TGA and CA. It was found that the stearic acid reacted with β-TCP and oxhydryl was formed during the surface modification. Hydrophilicity of untreated or modified β-TCP/PLLA composite was increased by the addition of 10wt.% β-TCP, but it decreased as the addition amount increased from 10wt.% to 20wt.%. Two models were suggested to describe the effect of β-TCP concentration on CA of the composites. Mechanical properties of β-TCP/PLLA composites were tested by bending and tensile tests. Fractures of the composites after mechanical test were observed by SEM. It was found that surface modification with stearic acid improved bending and tensile strengths of the β-TCP/PLLA composites obviously. The SEM results indicated that surface modification decreased the probability of interface debonding between fillers and matrix under load. PMID:26952440

  1. Identification of salicylic acid using surface modified polyurethane film using an imprinted layer of polyaniline.

    PubMed

    Sreenivasan, K

    2007-02-01

    The surface of polyurethane (PU) was modified by coating a thin layer of polyaniline (PAN) by oxidizing aniline using ammonium persulfate. Affinity sites for salicylic acid (SA) were created in the coated layer by non-covalent imprinting method. The imprinted layer adsorbed SA five times more compared to the nonimprinted surface reflecting the creation of affinity sites specific to SA on the surface. The equilibrium was attained relatively faster indicating that a material of this kind is suitable for sensing applications. The selectivity in recognizing the print molecule by the imprinted surface was assessed by comparing the extent of uptake of other structurally resembling molecules namely O-amino benzoic acid and acetyl salicylic acid. The selectivity factor was found to be 22 and 16.5. The adsorbed SA was detected using the technique of Fourier transform attenuated total internal reflection infrared spectroscopy (FT-ATR-IR). The results show that molecularly imprinted surface in combination with FT-IR is a useful approach for the sensing applications. PMID:17386557

  2. Surface components of chylomicrons from rats fed glyceryl or alkyl esters of fatty acids: minor components.

    PubMed

    Yang, L Y; Kuksis, A; Myher, J J; Pang, H

    1992-08-01

    The lipid class, fatty acid and molecular species composition of the minor polar surface components of rat lymph chylomicrons were determined during absorption of menhaden oil and corn oil or of the corresponding fatty acid ethyl esters. In addition to the previously reported minor polar lipids (sphingomyelin, phosphatidylserine, phosphatidylinositol, phosphatidic acid and lysophosphatidylcholine), we identified phosphatidylglycerol, dimethylphosphatidylethanolamine, ceramide and cholesteryl sulfate in the chylomicrons from both oil and ester feeding. The dietary fatty acids were found to be incorporated to a variable extent into the different phospholipid classes, the proportions of which remained the same during both types of feeding. No evidence was obtained for the presence of the minor glycerophospholipids characteristic of the lysosomal membranes (e.g., bis-phosphatidic, lysobisphosphatidic and semilysobis-phosphatidic acids), although special efforts were made to identify them. These results indicate that the chylomicrons arising from the monoacylglycerol and phosphatidic acid pathways of triacylglycerol biosynthesis become enveloped in closely similar monolayers of phospholipids. Hence, all triacylglycerols may be secreted from the villus cells via a common mechanism as suggested by the previously demonstrated convergence (at the 2-monoacylglycerol stage) of the monoacylglycerol and the phosphatidic acid pathways of mucosal triacylglycerol formation [Yang, Y.L., and Kuksis, A. (1991) J. Lipid Res. 32, 1173-1186]. PMID:1406072

  3. Decomposition of Pyruvic Acid on the Ground-State Potential Energy Surface.

    PubMed

    da Silva, Gabriel

    2016-01-21

    A potential energy surface is reported for isomerization and decomposition of gas-phase pyruvic acid (CH3C(O)C(O)OH) in its ground electronic state. Consistent with previous works, the lowest energy pathway for pyruvic acid decomposition is identified as decarboxylation to produce hydroxymethylcarbene (CH3COH), with overall barrier of 43 kcal mol(-1). This study discovers that pyruvic acid can also isomerize to the α-lactone form with a barrier of only 36 kcal mol(-1), from which CO elimination can occur at 49 kcal mol(-1) above pyruvic acid. An additional novel channel is identified for the tautomerisation of pyruvic acid to the enol form, via a double H-shift mechanism. The barrier for this process is 51 kcal mol(-1), which is around 20 kcal mol(-1) lower than the barrier for conventional keto-enol tautomerization via a 1,3-H shift transition state. Rate coefficients are calculated for pyruvic acid decomposition through RRKM theory/master equation simulations at 800-2000 K and 1 atm, showing good agreement with the available experimental data. The dissociation of vibrationally excited pyruvic acid produced through photoexcitation and subsequent internal conversion to the ground state is also modeled under tropospheric conditions and is seen to produce appreciable quantities of CO (∼1-4%) in addition to CH3COH via the dominant CO2 loss channel. PMID:26587666

  4. Optimization of acid hydrolysis from the hemicellulosic fraction of Eucalyptus grandis residue using response surface methodology.

    PubMed

    Canettieri, Eliana Vieira; de Moraes Rocha, George Jackson; de Carvalho, João Andrade; de Almeida e Silva, João Batista

    2007-01-01

    Biotechnological conversion of biomass into fuels and chemicals requires hydrolysis of the polysaccharide fraction into monomeric sugars. Hydrolysis can be performed enzymatically and with dilute or concentrate mineral acids. The present study used dilute sulfuric acid as a catalyst for hydrolysis of Eucalyptus grandis residue. The purpose of this paper was to optimize the hydrolysis process in a 1.4 l pilot-scale reactor and investigate the effects of the acid concentration, temperature and residue/acid solution ratio on the hemicellulose removal and consequently on the production of sugars (xylose, glucose and arabinose) as well as on the formation of by-products (furfural, 5-hydroxymethylfurfural and acetic acid). This study was based on a model composition corresponding to a 2(3) orthogonal factorial design and employed the response surface methodology (RSM) to optimize the hydrolysis conditions, aiming to attain maximum xylose extraction from hemicellulose of residue. The considered optimum conditions were: H(2)SO(4) concentration of 0.65%, temperature of 157 degrees C and residue/acid solution ratio of 1/8.6 with a reaction time of 20 min. Under these conditions, 79.6% of the total xylose was removed and the hydrolysate contained 1.65 g/l glucose, 13.65 g/l xylose, 1.55 g/l arabinose, 3.10 g/l acetic acid, 1.23 g/l furfural and 0.20 g/l 5-hydroxymethylfurfural. PMID:16473004

  5. Electrocatalytic oxidation of formic acid at an ordered intermetallic PtBi surface.

    PubMed

    Casado-Rivera, Emerilis; Gál, Zoltán; Angelo, A C D; Lind, Cora; DiSalvo, Francis J; Abruña, Héctor D

    2003-02-17

    The electrocatalytic oxidation of formic acid at a PtBi ordered intermetallic electrode surface has been investigated using cyclic voltammetry, rotating disk electrode (RDE) voltammetry and differential electrochemical mass spectrometry (DEMS). The results are compared to those at a polycrystalline platinum electrode surface. The PtBi electrode exhibits superior properties when compared to polycrystalline platinum in terms of oxidation onset potential, current density, and a much diminished poisoning effect by CO. Using the RDE technique, a value of 1.4 x 10(-4) cm s-1 was obtained for the heterogeneous charge transfer rate constant. The PtBi surface did not appear to be poisoned when exposed to a CO saturated solution for periods exceeding 0.5 h. The results for PtBi are discussed within the framework of the dual-path mechanism for the electrocatalytic oxidation of formic acid, which involves formation of a reactive intermediate and a poisoning pathway. PMID:12619419

  6. Relationships between the structure and the surface activity of nano-sized alumina in acid catalysis

    SciTech Connect

    Coster, D.; Gruver, V.; Blumenfeld, A.; Fripiat, J.J.

    1994-12-31

    As shown in another communication to Symposium 5, nano-sized aluminas enriched in pentacoordinated aluminum (Al{sup V}) are obtained through the limited hydrolysis of aluminum alkoxides. Here the surface properties of these aluminas are investigated from the catalytic point of view. The goal is to obtain geometrical information on the Lewis acid sites. {sup 1}H{r_arrow}{sup 27}Al (cross-polarization) high resolution MAS NMR, using chemisorbed NH{sub 3} which acts as a {sup 1}H spin reservoir, allows the direct observation of surface Al involved in the catalytic site. The polarization transfer from these protons to surface Al is remarkably efficient because of the relatively short Al:N-H distance. It is observed that the main Lewis acid sites are located on distorted tetrahedral aluminum and pentacoordinated Al. These results are compared to low temperature infrared data of adsorbed CO.

  7. Isoreticular two-dimensional covalent organic frameworks synthesized by on-surface condensation of diboronic acids.

    PubMed

    Dienstmaier, Jürgen F; Medina, Dana D; Dogru, Mirjam; Knochel, Paul; Bein, Thomas; Heckl, Wolfgang M; Lackinger, Markus

    2012-08-28

    On-surface self-condensation of 1,4-benzenediboronic acid was previously shown to yield extended surface-supported, long-range-ordered two-dimensional covalent organic frameworks (2D COFs). The most important prerequisite for obtaining high structural quality is that the polycondensation (dehydration) reaction is carried out under slightly reversible reaction conditions, i.e., in the presence of water. Only then can the subtle balance between kinetic and thermodynamic control of the polycondensation be favorably influenced, and defects that are unavoidable during growth can be corrected. In the present study we extend the previously developed straightforward preparation protocol to a variety of para-diboronic acid building blocks with the aim to tune lattice parameters and pore sizes of 2D COFs. Scanning tunneling microscopy is employed for structural characterization of the covalent networks and of noncovalently self-assembled structures that form on the surface prior to the thermally activated polycondensation reaction. PMID:22775491

  8. Gravity Survey of the Rye Patch KGRA, Rye Patch, Nevada

    NASA Astrophysics Data System (ADS)

    Mcdonald, M. R.; Gosnold, W. D.

    2011-12-01

    The Rye Patch Known Geothermal Resource Area (KGRA) is located in Pershing County Nevada on the west side of the Humboldt Range and east of the Rye Patch Reservoir approximately 200 km northeast of Reno, Nevada. Previous studies include an earlier gravity survey, 3-D seismic reflection, vertical seismic profiling (VSP) on a single well, 3-D seismic imaging, and a report of the integrated seismic studies. Recently, Presco Energy conducted an aeromagnetic survey and is currently in the process of applying 2-D VSP methods to target exploration and production wells at the site. These studies have indicated that geothermal fluid flow primarily occurs along faults and fractures and that two potential aquifers include a sandstone/siltstone member of the Triassic Natchez Pass Formation and a karst zone that occurs at the interface between Mesozoic limestone and Tertiary volcanics. We hypothesized that addition of a high-resolution gravity survey would better define the locations, trends, lengths, and dip angles of faults and possible solution cavity features. The gravity survey encompassed an area of approximately 78 km2 (30 mi2) within the boundary of the KGRA along with portions of 8 sections directly to the west and 8 sections directly to the east. The survey included 203 stations that were spaced at 400 m intervals. The simple Bouguer anomaly patterns were coincident with elevation, and those patterns remained after terrain corrections were performed. To remove this signal, the data were further processed using wave-length (bandpass) filtering techniques. The results of the filtering and comparison with the recent aeromagnetic survey indicate that the location and trend of major fault systems can be identified using this technique. Dip angles can be inferred by the anomaly contour gradients. By further reductions in the bandpass window, other features such as possible karst solution channels may also be recognizable. Drilling or other geophysical methods such as a

  9. Importance of unmanaged wasteland patches for the grey partridge Perdix perdix in suburban habitats

    NASA Astrophysics Data System (ADS)

    Šálek, Miroslav; Marhoul, Pavel; Pintíř, Jan; Kopecký, Tomáš; Slabý, Lukáš

    2004-03-01

    A significant component of breeding habitat of the grey partridge Perdix perdix in Europe includes field boundaries with idle sites and grassy strips, loss of which is considered as one of the reasons for the decline of grey partridge populations. We associate enduring high densities of wild grey partridges in Prague, the Czech Republic, with the existence of unmanaged wasteland, herbaceous patches spread out between urbanized areas of the capital and its surrounding agricultural landscape. The study combines density estimations, home range analysis, weed seed sampling and plant composition analysis, all with the aim of explaining factors influencing partridges' habitat preference. Patch size, availability of patches within the surrounding landscape and mean height of plant cover were the most important factors influencing the numbers of breeding pairs among patches. Numbers of weed seeds collected on the soil surface seems to be of greater importance than specific plant composition. Although patches supported high densities (tens of pairs km -2), the neighboring agricultural landscape supported low densities (<10 pairs km -2) with an influence of the distance to the nearest patch. April to June home range size varied around 2.9 ha and tended to be smaller for pairs with higher availability of patch habitat. A sufficient availability of temporary patches in the study area enabled a persistence of grey partridge populations without any support through hand-reared birds or systematic predator control. A surplus of offspring may potentially saturate the less attractive surrounding landscape but only to a reduced extent limited by its carrying capacity.

  10. Infrared studies of the reaction of methanesulfonic acid with trimethylamine on surfaces.

    PubMed

    Nishino, Noriko; Arquero, Kristine D; Dawson, Matthew L; Finlayson-Pitts, Barbara J

    2014-01-01

    Organosulfur compounds generated from a variety of biological as well as anthropogenic sources are oxidized in air to form sulfuric acid and methanesulfonic acid (MSA). Both of these acids formed initially in the gas phase react with ammonia and amines in air to form and grow new particles, which is important for visibility, human health and climate. A competing sink is deposition on surfaces in the boundary layer. However, relatively little is known about reactions after they deposit on surfaces. We report here diffuse reflectance infrared Fourier transform spectrometry (DRIFTS) studies of the reaction of MSA with trimethylamine (TMA) on a silicon powder at atmospheric pressure in synthetic air and at room temperature, either in the absence or in the presence of water vapor. In both cases, DRIFTS spectra of the product surface species are essentially the same as the transmission spectrum obtained for trimethylaminium methanesulfonate, indicating the formation of the salt on the surface with a lower limit to the reaction probability of γ > 10(-6). To the best of our knowledge, this is the first infrared study to demonstrate this chemistry from the heterogeneous reaction of MSA with an amine on a surface. This heterogeneous chemistry appears to be sufficiently fast that it could impact measurements of gas-phase amines through reactions with surface-adsorbed acids on sampling lines and inlets. It could also represent an additional sink for amines in the boundary layer, especially at night when the gas-phase reactions of amines with OH radical and ozone are minimized. PMID:24304088

  11. Model heterogeneous acid catalysts and metal-support interactions: A combined surface science and catalysis study

    SciTech Connect

    Boszormenyi, I.

    1991-05-01

    This (<100 [Angstrom]) silica-alumina layers were tested as potential model heterogeneous acid catalysts for combined surface science and catalysis studies. Three preparation methods were used: oxidation of r3 [times] r3 R30 Al/Si(111) structure in UHV; deposition on Si(lll) from aqueous solution; and argon ion beam sputter deposition in UHV. The homogeneous thin layers are amorphous, and the chemical environment of surface atoms is similar to that of Si, Al and oxygen atoms on high surface area acid catalysts. Since the ion beam-deposited thin layer of silica-alumina has the same composition as the target zeolite this deposition method is a promising tool to prepare model catalysts using practical catalyst targets. The silica-alumina layers are active in cumene cracking, a typical acid catalyzed reaction. In order to clearly distinguish background reactions and the acid catalyzed reaction at least 20 cm[sup 2] catalyst surface area is needed. Two series of model platinum-alumina catalysts were prepared in a combined UHV -- high pressure reactor cell apparatus by depositing alumina on polycrystalline Pt foil and by vapor depositing Pt on a thin alumina layer on Au. Both model surfaces have been prepared with and without chlorine. AES, CO desorption as well as methyl cyclopentane (MCP) hydrogenolysis studies indicate that the Pt surface area is always higher if a chlorination step is involved. Selectivity patterns in MCP ring opening on Pt-on-alumina'' and on alumina-on-Pt'' are different; only the former is a linear combination of selective and statistical ring opening. Product distribution, however, changes with coverage and reaction time. The properties of the two model catalyst systems and role of chlorine in MCP hydrogenolysis are also discussed.

  12. Model heterogeneous acid catalysts and metal-support interactions: A combined surface science and catalysis study

    SciTech Connect

    Boszormenyi, I.

    1991-05-01

    This (<100 {Angstrom}) silica-alumina layers were tested as potential model heterogeneous acid catalysts for combined surface science and catalysis studies. Three preparation methods were used: oxidation of r3 {times} r3 R30 Al/Si(111) structure in UHV; deposition on Si(lll) from aqueous solution; and argon ion beam sputter deposition in UHV. The homogeneous thin layers are amorphous, and the chemical environment of surface atoms is similar to that of Si, Al and oxygen atoms on high surface area acid catalysts. Since the ion beam-deposited thin layer of silica-alumina has the same composition as the target zeolite this deposition method is a promising tool to prepare model catalysts using practical catalyst targets. The silica-alumina layers are active in cumene cracking, a typical acid catalyzed reaction. In order to clearly distinguish background reactions and the acid catalyzed reaction at least 20 cm{sup 2} catalyst surface area is needed. Two series of model platinum-alumina catalysts were prepared in a combined UHV -- high pressure reactor cell apparatus by depositing alumina on polycrystalline Pt foil and by vapor depositing Pt on a thin alumina layer on Au. Both model surfaces have been prepared with and without chlorine. AES, CO desorption as well as methyl cyclopentane (MCP) hydrogenolysis studies indicate that the Pt surface area is always higher if a chlorination step is involved. Selectivity patterns in MCP ring opening on ``Pt-on-alumina`` and on ``alumina-on-Pt`` are different; only the former is a linear combination of selective and statistical ring opening. Product distribution, however, changes with coverage and reaction time. The properties of the two model catalyst systems and role of chlorine in MCP hydrogenolysis are also discussed.

  13. Heterologous surface display on lactic acid bacteria: non-GMO alternative?

    PubMed Central

    Zadravec, Petra; Štrukelj, Borut; Berlec, Aleš

    2015-01-01

    Lactic acid bacteria (LAB) are food-grade hosts for surface display with potential applications in food and therapy. Alternative approaches to surface display on LAB would avoid the use of recombinant DNA technology and genetically-modified organism (GMO)-related regulatory requirements. Non-covalent surface display of proteins can be achieved by fusing them to various cell-wall binding domains, of which the Lysine motif domain (LysM) is particularly well studied. Fusion proteins have been isolated from recombinant bacteria or from their growth medium and displayed on unmodified bacteria, enabling heterologous surface display. This was demonstrated on non-viable cells devoid of protein content, termed bacteria-like particles, and on various species of genus Lactobacillus. Of the latter, Lactobacillus salivarius ATCC 11741 was recently shown to be particularly amenable for LysM-mediated display. Possible regulatory implications of heterologous surface display are discussed, particularly those relevant for the European Union. PMID:25880164

  14. Enhanced lubrication on tissue and biomaterial surfaces through peptide-mediated binding of hyaluronic acid

    NASA Astrophysics Data System (ADS)

    Singh, Anirudha; Corvelli, Michael; Unterman, Shimon A.; Wepasnick, Kevin A.; McDonnell, Peter; Elisseeff, Jennifer H.

    2014-10-01

    Lubrication is key for the efficient function of devices and tissues with moving surfaces, such as articulating joints, ocular surfaces and the lungs. Indeed, lubrication dysfunction leads to increased friction and degeneration of these systems. Here, we present a polymer-peptide surface coating platform to non-covalently bind hyaluronic acid (HA), a natural lubricant in the body. Tissue surfaces treated with the HA-binding system exhibited higher lubricity values, and in vivo were able to retain HA in the articular joint and to bind ocular tissue surfaces. Biomaterials-mediated strategies that locally bind and concentrate HA could provide physical and biological benefits when used to treat tissue-lubricating dysfunction and to coat medical devices.

  15. Immunoisolation Patch System for Cellular Transplantation

    NASA Technical Reports Server (NTRS)

    Wang, Taylor G. (Inventor)

    2014-01-01

    An immunoisolation patch system, and particularly a patch system comprising multiple immunoisolation microcapsules, each encapsulating biological material such as cells for transplantation, which can be used in the prophylactic and therapeutic treatment of disease in large animals and humans without the need for immunosuppression.

  16. Transdermal patches: history, development and pharmacology

    PubMed Central

    Pastore, Michael N; Kalia, Yogeshvar N; Horstmann, Michael; Roberts, Michael S

    2015-01-01

    Transdermal patches are now widely used as cosmetic, topical and transdermal delivery systems. These patches represent a key outcome from the growth in skin science, technology and expertise developed through trial and error, clinical observation and evidence-based studies that date back to the first existing human records. This review begins with the earliest topical therapies and traces topical delivery to the present-day transdermal patches, describing along the way the initial trials, devices and drug delivery systems that underpin current transdermal patches and their actives. This is followed by consideration of the evolution in the various patch designs and their limitations as well as requirements for actives to be used for transdermal delivery. The properties of and issues associated with the use of currently marketed products, such as variability, safety and regulatory aspects, are then described. The review concludes by examining future prospects for transdermal patches and drug delivery systems, such as the combination of active delivery systems with patches, minimally invasive microneedle patches and cutaneous solutions, including metered-dose systems. PMID:25560046

  17. Bulkhead interface chassis for optical fiber patching

    NASA Astrophysics Data System (ADS)

    George, M.

    1985-06-01

    An optical fiber patch panel was designed to meet the changing needs of optical fiber communication link installations. This paper deals with the specification and construction details of the Bulkhead Interface Chassis patch panel. Included is ordering information for the commercial parts needed and shop drawings of the pieces to be machined.

  18. Assessment of patches attributes along the Urban Development Gradient

    NASA Astrophysics Data System (ADS)

    Kopel, Daniella; Wittenberg, lea; Malkinson, Dan

    2014-05-01

    which vegetation was surveyed. . All vascular plant species were recorded and identified. The mineral soils (A horizon, depth 10-15 cm) were collected to obtain a constant sample size after removing surface litter and organic matter. The samples were analyzed for mineral and structure properties. Preliminary results of the plant survey and analysis indicated that the patches' vegetation is highly diverse. Within the large patches, regardless of their location along the urban development gradient, higher sub-habitat diversity and plants diversity were observed. The diversity is high for local and exotic species alike. In the medium and small size patches, also regardless of their location, there is a diversity of plant composition that may be connected to different disturbances or matrix related effect not yet considered in the study. Preliminary results of the soil survey and analysis indicated that more than 75% of the soil samples taken from the OGP, regardless of their location in the urban development gradient, exhibited a considerable changes in soil profile, compared to "natural" soils and significant alternations in the physical properties were also observed. The substance that was found in the remnant OGP in Haifa is different from soil, however, links between the urban-soils altered properties and the vegetation composition in those patches, and there relationships are not fully understood.

  19. Chemical modification of chitosan film via surface grafting of citric acid molecular to promote the biomineralization

    NASA Astrophysics Data System (ADS)

    Liu, Yang; Shen, Xin; Zhou, Huan; Wang, Yingjun; Deng, Linhong

    2016-05-01

    We develop a novel chitosan-citric acid film (abbreviated as CS-CA) suitable for biomedical applications in this study. In this CS-CA film, the citric acid, which is a harmless organic acid has been extensively investigated as a modifying agent on carbohydrate polymers, was cross-linked by 1-Ethyl-3-(3-dimethyl aminopropyl) carbodiimide (EDC) and N-hydroxysuccinimide (NHS) onto the surface of chitosan (CS) film. Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) confirms the graft copolymerization of the modified chitosan film (CS-CA). Surface wettability, moisturizing performance, the capacity of mineralization in vitro and biocompatibility of the films were characterized. After modification, this CS-CA film has good hydrophilicity. It is very evident that the citric acid grafting treatment significantly promotes the biomineralization of the chitosan based substrates. Cell experiments show that the MC3T3-E1 osteoblasts can adhere and proliferate well on the surface of CS-CA film. This CS-CA film, which can be prepared in large quantities and at low cost, should have potential application in bone tissue engineering.

  20. Tendon graft substitutes-rotator cuff patches.

    PubMed

    Coons, David A; Alan Barber, F

    2006-09-01

    Over the past few years, many biologic patches have been developed to augment repairs of large or complex tendon tears. These patches include both allograft and xenografts. Regardless of their origins, these products are primarily composed of purified type I collagen. Many factors should be considered when choosing an augmentation patch including tissue origin, graft processing, cross-linking, clinical experience, and physical properties. The purpose of this article is to familiarize the sports medicine community with several tendon augmentation grafts: GraftJacket (Wright Medical Technology, Arlington, TN), CuffPatch (Organogenesis, Canton, MA, licensed to Arthrotek, Warsaw, IN), Restore (Depuy, Warsaw, IN), Zimmer Collagen Repair (Permacol) patch (Tissue Science Laboratories Covington, GA, licensed to Zimmer, Warsaw, IN), TissueMend (TEI Biosciences, Boston, MA, licensed to Stryker Howmedica Osteonics, Kalamazoo, MI), OrthoADAPT (Pegasus Biologics, Irvine, CA), and BioBlanket (Kensey Nash, Exton, PA). PMID:17135966

  1. Engineered Tissue Patch for Cardiac Cell Therapy

    PubMed Central

    Zhang, Jianyi

    2015-01-01

    Opinion statement Cell therapy can be administered via injections delivered directly into the myocardium or as engineered cardiac tissue patches, which are the subject of this review. Engineered cardiac patches can be created from sheets of interconnected cells or by suspending the cells in a scaffold of material that is designed to mimic the native extracellular matrix. The sheet-based approach produces patches with well-aligned and electronically coupled cardiomyocytes, but cell-containing scaffolds are more readily vascularized by the host's circulatory system and, consequently, are currently more suitable for applications that require a thicker patch. Cell patches can also be modified for the co-delivery of peptides that may promote cell survival and activate endogenous repair mechanisms; nevertheless, techniques for controlling inflammation, limiting apoptosis, and improving vascular growth need continue to be developed to make it a therapeutic modality for patients with myocardial infarction. PMID:26122908

  2. Effects of slits in a patch of omnidirectional Lamb-wave MPT on the transducer output

    NASA Astrophysics Data System (ADS)

    Kim, Kiyean; Lee, Hyung Jin; Lee, Joo Kyung; Kim, Yoon Young

    2016-03-01

    An omnidirectional Lamb-wave magnetostrictive patch transducer (MPT) uses a thin circular magnetostrictive patch excited by the axisymmetric turns of a plane coil placed over it. Since the dynamic magnetic field applied by the coil induces an eddy current only on the top surface due to the skin effect, the mechanical deformation in the patch is confined only near the surface, considerably limiting the transducer output power. This study shows that if a radial slit is introduced in the patch, the circular flow of the eddy current on the top surface only becomes broken, and thus the eddy current flows on both the top and bottom surfaces. As a consequence, there is a substantial increase in the dynamic magnetic field in the patch and, in turn, an increased transducer output power. Interestingly, the material type, either metallic or nonmetallic, of the test waveguide plate affects the magnitude of the eddy current near the bottom surface and the overall magnetic field. If the number of slits is over a certain number, say, 8, and the slits are symmetrically made in the patch, the omni-directivity of the resulting MPT is virtually ensured. Finally, the present findings are verified both numerically and experimentally.

  3. Safe patch version 0.9 user manual

    SciTech Connect

    Kelley, M

    1999-03-01

    The SafePatch version 0.9 provides automated analysis of network-based computer systems to determine the status of security patches and distributes needed patches. SafePatch determines what patches need to be installed and what patches are installed on a system. SafePatch will distribute needed patches to the remote system for later installation. For those patches that are installed, SafePatch checks the permissions and ownership of the files referenced in the patch and reports on the attributes that differ from those recommended by the patch. SafePatch also ensures that the system software is authentic (that is, belonging to either a release of an operating system or a patch). The process SafePatch uses to authenticate the software on a system is more reliable and secure than other vendor-specific tools. SafePatch compares the remote system's files with the files from the patches to determine what is actually installed and what needs to be installed. This approach ensures accurate reporting of a system's patch status. It also allows SafePatch to identify files that do not belong to either the original system distribution (for example, Solaris 2.5) or to any patch. These unidentified files may be customized or trojan. Either way these files should be investigated further to determine their exact origin.

  4. EFFECT OF ACID ETCHING OF GLASS IONOMER CEMENT SURFACE ON THE MICROLEAKAGE OF SANDWICH RESTORATIONS

    PubMed Central

    Bona, Álvaro Della; Pinzetta, Caroline; Rosa, Vinícius

    2007-01-01

    The purposes of this study were to evaluate the sealing ability of different glass ionomer cements (GICs) used for sandwich restorations and to assess the effect of acid etching of GIC on microleakage at GIC-resin composite interface. Forty cavities were prepared on the proximal surfaces of 20 permanent human premolars (2 cavities per tooth), assigned to 4 groups (n=10) and restored as follows: Group CIE – conventional GIC (CI) was applied onto the axial and cervical cavity walls, allowed setting for 5 min and acid etched (E) along the cavity margins with 35% phosphoric acid for 15 s, washed for 30 s and water was blotted; the adhesive system was applied and light cured for 10 s, completing the restoration with composite resin light cured for 40 s; Group CIN – same as Group CIE, except for acid etching of the CI surface; Group RME – same as CIE, but using a resin modified GIC (RMGIC); Group RMN – same as Group RME, except for acid etching of the RMGIC surface. Specimens were soaked in 1% methylene blue dye solution at 24°C for 24 h, rinsed under running water for 1 h, bisected longitudinally and dye penetration was measured following the ISO/TS 11405-2003 standard. Results were statistically analyzed by Kruskal-Wallis and chi-square tests (α=0.05). Dye penetration scores were as follow: CIE – 2.5; CIN – 2.5; RME – 0.9; and RMN – 0.6. The results suggest that phosphoric acid etching of GIC prior to the placement of composite resin does not improve the sealing ability of sandwich restorations. The RMGIC was more effective in preventing dye penetration at the GIC-resin composite- dentin interfaces than CI. PMID:19089135

  5. Photolysis of Nitric Acid and Nitrate on Natural and Artificial Surfaces.

    PubMed

    Ye, Chunxiang; Gao, Honglian; Zhang, Ning; Zhou, Xianliang

    2016-04-01

    Photolysis of nitric acid and nitrate (HNO3/nitrate) was investigated on the surfaces of natural and artificial materials, including plant leaves, metal sheets, and construction materials. The surfaces were conditioned in the outdoor air prior to experiments to receive natural depositions of ambient HNO3/nitrate and other atmospheric constituents. The photolysis rate constant (JHNO3(s)) of the surface HNO3/nitrate was measured based on the production rates of nitrous acid (HONO) and nitrogen oxides (NOx). The JHNO3(s) values, from 6.0 × 10(-6) s(-1) to 3.7 × 10(-4) s(-1), are 1 to 3 orders of magnitude higher than that of gaseous HNO3. The HONO was the major product from photolysis of HNO3/nitrate on most plant leaves, whereas NOx was the major product on most artificial surfaces. The JHNO3(s) values decreased with HNO3/nitrate surface density and could be described by a simple analytical equation. Within a typical range of HNO3/nitrate surface density in the low-NOx forested areas, photolysis of HNO3/nitrate on the forest canopy can be a significant source for HONO and NOx for the overlying atmosphere. PMID:26936001

  6. Superhydrophobic poly(L-lactic acid) surface as potential bacterial colonization substrate

    PubMed Central

    2011-01-01

    Hydrophobicity is a very important surface property and there is a growing interest in the production and characterization of superhydrophobic surfaces. Accordingly, it was recently shown how to obtain a superhydrophobic surface using a simple and cost-effective method on a polymer named poly(L-lactic acid) (PLLA). To evaluate the ability of such material as a substrate for bacterial colonization, this work assessed the capability of different bacteria to colonize a biomimetic rough superhydrophobic (SH) PLLA surface and also a smooth hydrophobic (H) one. The interaction between these surfaces and bacteria with different morphologies and cell walls was studied using one strain of Staphylococcus aureus and one of Pseudomonas aeruginosa. Results showed that both bacterial strains colonized the surfaces tested, although significantly higher numbers of S. aureus cells were found on SH surfaces comparing to H ones. Moreover, scanning electron microscopy images showed an extracellular matrix produced by P. aeruginosa on SH PLLA surfaces, indicating that this bacterium is able to form a biofilm on such substratum. Bacterial removal through lotus leaf effect was also tested, being more efficient on H coupons than on SH PLLA ones. Overall, the results showed that SH PLLA surfaces can be used as a substrate for bacterial colonization and, thus, have an exceptional potential for biotechnology applications. PMID:22018163

  7. Nutrient-deprived cancer cells preferentially use sialic acid to maintain cell surface glycosylation.

    PubMed

    Badr, Haitham A; AlSadek, Dina M M; Mathew, Mohit P; Li, Chen-Zhong; Djansugurova, Leyla B; Yarema, Kevin J; Ahmed, Hafiz

    2015-11-01

    Cancer is characterized by abnormal energy metabolism shaped by nutrient deprivation that malignant cells experience during various stages of tumor development. This study investigated the response of nutrient-deprived cancer cells and their non-malignant counterparts to sialic acid supplementation and found that cells utilize negligible amounts of this sugar for energy. Instead cells use sialic acid to maintain cell surface glycosylation through complementary mechanisms. First, levels of key metabolites (e.g., UDP-GlcNAc and CMP-Neu5Ac) required for glycan biosynthesis are maintained or enhanced upon Neu5Ac supplementation. In concert, sialyltransferase expression increased at both the mRNA and protein levels, which facilitated increased sialylation in biochemical assays that measure sialyltransferase activity as well as at the whole cell level. In the course of these experiments, several important differences emerged that differentiated the cancer cells from their normal counterparts including resistant to sialic acid-mediated energy depletion, consistently more robust sialic acid-mediated glycan display, and distinctive cell surface vs. internal vesicle display of newly-produced sialoglycans. Finally, the impact of sialic acid supplementation on specific markers implicated in cancer progression was demonstrated by measuring levels of expression and sialylation of EGFR1 and MUC1 as well as the corresponding function of sialic acid-supplemented cells in migration assays. These findings both provide fundamental insight into the biological basis of sialic acid supplementation of nutrient-deprived cancer cells and open the door to the development of diagnostic and prognostic tools. PMID:26295436

  8. Oxidation of formic acid on platinum surfaces decorated with cobalt(III) macrocyclic complexes

    NASA Astrophysics Data System (ADS)

    Stevanović, S.; Babić-Samardžija, K.; Sovilj, S. P.; Tripković, A.; Jovanović, V. M.

    2009-09-01

    Platinum electrode decorated with three different mixed-ligand cobalt(III) complexes of the general formula [Co(Rdtc)cyclam](ClO4)2 [cyclam = 1,4,8,11-tetraazacyclotetradecane, Rdtc- = morpholine-(Morphdtc), piperidine-(Pipdtc), and 4-methylpiperidine-(4-Mepipdtc) dithiocarbamates, respectively] was used to study oxidation of formic acid in acidic solution. The complexes were adsorbed on differently prepared Pt surfaces, at open circuit potential. The preliminary results show increased catalytic activity of Pt for formic acid oxidation with complex ion adsorbed on the polycrystalline surfaces. The increase in catalytic activity depends on the structure of the complex applied and follows the order of metal-coordinated bidentate ligand as Morphdtc > Pipdtc > 4-Mepipdtc. Based on IR and NMR data, the main characteristics of the Rdtc ligands do not vary dramatically, but high symmetry of the corresponding complexes decreases in the same order. Accordingly, the complexes are distinctively more mobile, causing chemical interactions to occur on the surface with appreciable speed and enhanced selectivity. The effect of the complexes on catalytic activity presumably depends on structural changes on Pt surfaces caused by their adsorption.

  9. Effect of permeation enhancers in the mucoadhesive buccal patches of salbutamol sulphate for unidirectional buccal drug delivery

    PubMed Central

    Prasanth, V.V.; Puratchikody, A.; Mathew, S.T.; Ashok, K.B.

    2014-01-01

    The purpose of this work was to study the effect of various permeation enhancers on the permeation of salbutamol sulphate (SS) buccal patches through buccal mucosa in order to improve the bioavailability by avoiding the first pass metabolism in the liver and possibly in the gut wall and also achieve a better therapeutic effect. The influence of various permeation enhancers, such as dimethyl sulfoxide (DMSO), linoleic acid (LA), isopropyl myristate (IPM) and oleic acid (OA) on the buccal absorption of SS from buccal patches containing different polymeric combinations such as hydroxypropyl methyl cellulose (HPMC), carbopol, polyvinyl alcohol (PVA), polyvinyl pyrollidone (PVP), sodium carboxymethyl cellulose (NaCMC), acid and water soluble chitosan (CHAS and CHWS) and Eudragit-L100 (EU-L100) was investigated. OA was the most efficient permeation enhancer increasing the flux greater than 8-fold compared with patches without permeation enhancer in HPMC based buccal patches when PEG-400 was used as the plasticizer. LA also exhibited a better permeation enhancing effect of over 4-fold in PVA and HPMC based buccal patches. In PVA based patches, both OA and LA were almost equally effective in improving the SS permeation irrespective of the plasticizer used. DMSO was more effective as a permeation enhancer in HPMC based patches when PG was the plasticizer. IPM showed maximum permeation enhancement of greater than 2-fold when PG was the plasticizer in HPMC based buccal patches. PMID:25657797

  10. Effect of permeation enhancers in the mucoadhesive buccal patches of salbutamol sulphate for unidirectional buccal drug delivery.

    PubMed

    Prasanth, V V; Puratchikody, A; Mathew, S T; Ashok, K B

    2014-01-01

    The purpose of this work was to study the effect of various permeation enhancers on the permeation of salbutamol sulphate (SS) buccal patches through buccal mucosa in order to improve the bioavailability by avoiding the first pass metabolism in the liver and possibly in the gut wall and also achieve a better therapeutic effect. The influence of various permeation enhancers, such as dimethyl sulfoxide (DMSO), linoleic acid (LA), isopropyl myristate (IPM) and oleic acid (OA) on the buccal absorption of SS from buccal patches containing different polymeric combinations such as hydroxypropyl methyl cellulose (HPMC), carbopol, polyvinyl alcohol (PVA), polyvinyl pyrollidone (PVP), sodium carboxymethyl cellulose (NaCMC), acid and water soluble chitosan (CHAS and CHWS) and Eudragit-L100 (EU-L100) was investigated. OA was the most efficient permeation enhancer increasing the flux greater than 8-fold compared with patches without permeation enhancer in HPMC based buccal patches when PEG-400 was used as the plasticizer. LA also exhibited a better permeation enhancing effect of over 4-fold in PVA and HPMC based buccal patches. In PVA based patches, both OA and LA were almost equally effective in improving the SS permeation irrespective of the plasticizer used. DMSO was more effective as a permeation enhancer in HPMC based patches when PG was the plasticizer. IPM showed maximum permeation enhancement of greater than 2-fold when PG was the plasticizer in HPMC based buccal patches. PMID:25657797

  11. Surface-Mediated Hydrogen Bonding of Proteinogenic α-Amino Acids on Silicon.

    PubMed

    Rahsepar, Fatemeh R; Moghimi, Nafiseh; Leung, K T

    2016-05-17

    Understanding the adsorption, film growth mechanisms, and hydrogen bonding interactions of biological molecules on semiconductor surfaces has attracted much recent attention because of their applications in biosensors, biocompatible materials, and biomolecule-based electronic devices. One of the most challenging questions when studying the behavior of biomolecules on a metal or semiconductor surface is "What are the driving forces and film growth mechanisms for biomolecular adsorption on these surfaces?" Despite a large volume of work on self-assembly of amino acids on single-crystal metal surfaces, semiconductor surfaces offer more direct surface-mediated interactions and processes with biomolecules. This is due to their directional surface dangling bonds that could significantly perturb hydrogen bonding arrangements. For all the proteinogenic biomolecules studied to date, our group has observed that they generally follow a "universal" three-stage growth process on Si(111)7×7 surface. This is supported by corroborating data obtained from a three-pronged approach of combining chemical-state information provided by X-ray photoelectron spectroscopy (XPS) and the site-specific local density-of-state images obtained by scanning tunneling microscopy (STM) with large-scale quantum mechanical modeling based on the density functional theory with van der Waals corrections (DFT-D2). Indeed, this three-stage growth process on the 7×7 surface has been observed for small benchmark biomolecules, including glycine (the simplest nonchiral amino acid), alanine (the simplest chiral amino acid), cysteine (the smallest amino acid with a thiol group), and glycylglycine (the smallest (di)peptide of glycine). Its universality is further validated here for the other sulfur-containing proteinogenic amino acid, methionine. We use methionine as an example of prototypical proteinogenic amino acids to illustrate this surface-mediated process. This type of growth begins with the formation of

  12. Image Quality Assessment Based on Inter-Patch and Intra-Patch Similarity

    PubMed Central

    Zhou, Fei; Lu, Zongqing; Wang, Can; Sun, Wen; Xia, Shu-Tao; Liao, Qingmin

    2015-01-01

    In this paper, we propose a full-reference (FR) image quality assessment (IQA) scheme, which evaluates image fidelity from two aspects: the inter-patch similarity and the intra-patch similarity. The scheme is performed in a patch-wise fashion so that a quality map can be obtained. On one hand, we investigate the disparity between one image patch and its adjacent ones. This disparity is visually described by an inter-patch feature, where the hybrid effect of luminance masking and contrast masking is taken into account. The inter-patch similarity is further measured by modifying the normalized correlation coefficient (NCC). On the other hand, we also attach importance to the impact of image contents within one patch on the IQA problem. For the intra-patch feature, we consider image curvature as an important complement of image gradient. According to local image contents, the intra-patch similarity is measured by adaptively comparing image curvature and gradient. Besides, a nonlinear integration of the inter-patch and intra-patch similarity is presented to obtain an overall score of image quality. The experiments conducted on six publicly available image databases show that our scheme achieves better performance in comparison with several state-of-the-art schemes. PMID:25793282

  13. UAV multiple image dense matching based on self-adaptive patch

    NASA Astrophysics Data System (ADS)

    Zhu, Jin; Ding, Yazhou; Xiao, Xiongwu; Guo, Bingxuan; Li, Deren; Yang, Nan; Zhang, Weilong; Huang, Xiangxiang; Li, Linhui; Peng, Zhe; Pan, Fei

    2015-12-01

    This article using some state-of-art multi-view dense matching methods for reference, proposes an UAV multiple image dense matching algorithm base on Self-Adaptive patch (UAV-AP) in view of the specialty of UAV images. The main idea of matching propagating based on Self-Adaptive patch is to build patches centered by seed points which are already matched. The extent and figure of the patches can adapt to the terrain relief automatically: when the surface is smooth, the extent of the patch would become bigger to cover the whole smooth terrain; while the terrain is very rough, the extent of the patch would become smaller to describe the details of the surface. With this approach, the UAV image sequences and the given or previously triangulated orientation elements are taken as inputs. The main processing procedures are as follows: (1) multi-view initial feature matching, (2) matching propagating based on Self-Adaptive patch, (3) filtering the erroneous matching points. Finally, the algorithm outputs a dense colored point cloud. Experiments indicate that this method surpassed the existing related algorithm in efficiency and the matching precision is also quite ideal.

  14. Facile transition from hydrophilicity to superhydrophilicity and superhydrophobicity on aluminum alloy surface by simple acid etching and polymer coating

    NASA Astrophysics Data System (ADS)

    Liu, Wenyong; Sun, Linyu; Luo, Yuting; Wu, Ruomei; Jiang, Haiyun; Chen, Yi; Zeng, Guangsheng; Liu, Yuejun

    2013-09-01

    The transition from the hydrophilic surface to the superhydrophilic and superhydrophobic surface on aluminum alloy via hydrochloric acid etching and polymer coating was investigated by contact angle (CA) measurements and scanning electron microscope (SEM). The effects of etching and polymer coating on the surface were discussed. The results showed that a superhydrophilic surface was facilely obtained after acid etching for 20 min and a superhydrophobic surface was readily fabricated by polypropylene (PP) coating after acid etching. When the etching time was 30 min, the CA was up to 157̊. By contrast, two other polymers of polystyrene (PS) and polypropylene grafting maleic anhydride (PP-g-MAH) were used to coat the aluminum alloy surface after acid etching. The results showed that the CA was up to 159̊ by coating PP-g-MAH, while the CA was only 141̊ by coating PS. By modifying the surface with the silane coupling agent before PP coating, the durability and solvent resistance performance of the superhydrophobic surface was further improved. The micro-nano concave-convex structures of the superhydrophilic surface and the superhydrophobic surface were further confirmed by scanning electron microscope (SEM). Combined with the natural hydrophilicity of aluminum alloy, the rough micro-nano structures of the surface led to the superhydrophilicity of the aluminum alloy surface, while the rough surface structures led to the superhydrophobicity of the aluminum alloy surface by combination with the material of PP with the low surface free energy.

  15. A vibrational study of the adsorption and decomposition of formic acid and surface formate on Al(111)

    NASA Astrophysics Data System (ADS)

    Crowell, J. E.; Chen, J. G.; Yates, J. T., Jr.

    1986-09-01

    The adsorption and decomposition of formate and formic acid have been studied on the Al(111) surface using high resolution electron energy loss spectroscopy (EELS) and temperature programmed desorption (TPD). Formic acid reacts with clean Al(111) at 120 K to form a surface formate species. Molecular adsorption of formic acid occurs at 120 K only after saturation of the surface formate layer has been reached. Off-specular vibrational measurements have determined that the formate species is symmetrically bridge bonded through both oxygen atoms with C2v symmetry. A lower symmetry formate species of C1 symmetry is produced upon heating or electron bombardment of a condensed formic acid layer. Thermal or electron induced decomposition of a formate or a condensed formic acid layer is controlled by oxygen incorporation into the aluminum lattice, and results in complete decomposition and production of a carbon and oxygen covered surface. Only hydrogen is evolved from a formate-covered Al(111) surface.

  16. A model for heterogeneous chemical processes on the surfaces of ice and nitric acid trihydrate particles

    SciTech Connect

    Tabazadeh, A.; Turco, R.P.

    1993-07-20

    A model is developed that incorporates the physics and physical chemistry of ice surfaces relevant to polar stratospheric clouds. The Langmuir and Brunauer, Emmett, and Teller (BET) adsorption isotherms are used to compute surface concentrations of H{sub 2}O, HCl, HOCl, ClONO{sub 2} and N{sub 2}O{sub 5} on ice and nitric acid trihydrate (NAT) crystals. Assuming pseudo-first-order kinetics with respect to adsorbed HOCl, ClONO{sub 2} and N{sub 2}O{sub 5}, surface reaction rates and reaction probabilities (sticking coefficients) are determined. The model parameters (surface morphology and energies) are extracted from measured uptake coefficients and reaction probabilities. For gas pressures of about 10{sup {minus}7} torr and temperatures in the range of 180-200 K, HCl completely coats ice and water-rich NAT surfaces, while HOCl, ClONO{sub 2} and N{sub 2}O{sub 5} may cover 0.01-1% of these surfaces. The model is applied to analyze laboratory data, leading to estimates of adsorption free energies, enthalpies and entropies for HCl, HOCl, ClONO{sub 2} and N{sub 2}O{sub 5} on ice and NAT surfaces, and activation energies for the heterogeneous reactions of HCl and H{sub 2}O with HOCl, ClONO{sub 2} and N{sub 2}O{sub 5} on these surfaces. The energy parameters are used to calculate surface parameters such as adsorption and desorption consistants, surface coverages, reaction rate coefficients, surface diffusion coefficients and reaction probabilities for various species and chemical interactions on ice and NAT surfaces. Implications for chemical processing on polar stratospheric clouds are discussed. 53 refs., 6 figs., 4 tabs.

  17. Poly-lactic-glycolic-acid surface nanotopographies selectively decrease breast adenocarcinoma cell functions

    NASA Astrophysics Data System (ADS)

    Zhang, Lijuan; Webster, Thomas J.

    2012-04-01

    The ability of poly(lactic-co-glycolic acid) (PLGA, 50:50 PLG/PGA, wt%) nanotopographies to decrease lung epithelial carcinoma cell functions (including adhesion, proliferation, apoptosis and vascular endothelial growth factor (VEGF) secretion) has been previously reported. Specifically, results demonstrated decreased lung epithelial carcinoma cell VEGF synthesis on 23 nm surface-featured PLGA compared to traditional nanosmooth PLGA. However, clearly, different cell lines could have different behaviors on similar biomaterials. Thus, to investigate the universality of nanopatterned PLGA substrates to inhibit numerous cancer cell functions, here, breast epithelial adenocarcinoma cell (MCF-7) adhesion, proliferation, apoptosis and VEGF secretion were determined on different PLGA nanometer surface topographies. To isolate surface nanotopographical effects from all other surface properties, PLGA surfaces with various nanotopographies but similar chemistry and hydrophobicity were fabricated here. Atomic force microscopy (AFM) verified the varied nanotopographies on the PLGA surfaces prepared in this study. Importantly, results demonstrated for the first time significantly decreased breast adenocarcinoma cell functions (including decreased proliferation rate, increased apoptosis and decreased VEGF synthesis) on 23 nm featured PLGA surfaces compared to all other PLGA surface topographies fabricated (specifically, nanosmooth, 300 and 400 nm surface-featured PLGA surfaces). In contrast, healthy breast epithelial cells proliferated more (24%) on the 23 nm featured PLGA surfaces compared to all other PLGA samples. In summary, these results provided further insights into understanding the role PLGA surface nanotopographies can have on cancer cell functions and, more importantly, open the possibility of using polymer nanotopographies for a wide range of anticancer regenerative medicine applications (without resorting to the use of chemotherapeutics).

  18. Competition between Displacement and Dissociation of a Strong Acid Compared to a Weak Acid Adsorbed on Silica Particle Surfaces: The Role of Adsorbed Water.

    PubMed

    Fang, Yuan; Tang, Mingjin; Grassian, Vicki H

    2016-06-16

    The adsorption of nitric (HNO3) and formic (HCOOH) acids on silica particle surfaces and the effect of adsorbed water have been investigated at 296 K using transmission FTIR spectroscopy. Under dry conditions, both nitric and formic acids adsorb reversibly on silica. Additionally, the FTIR spectra show that both of these molecules remain in the protonated form. At elevated relative humidities (RH), adsorbed water competes both for surface adsorption sites with these acids as well as promotes their dissociation to hydronium ions and the corresponding anions. Compared to HNO3, the extent of dissociation is much smaller for HCOOH, very likely because it is a weaker acid. This study provides valuable insights into the interaction of HNO3 and HCOOH with silica surface on the molecular level and further reveals the complex roles of surface-adsorbed water in atmospheric heterogeneous chemistry of mineral dust particles-many of these containing silica. PMID:27220375

  19. Patch shape, connectivity, and foraging by oldfield mice (Peromyscus polionotus).

    SciTech Connect

    Orrock, John, L.; Danielson, Brent J

    2005-06-01

    We examined how corridors and patch shape affect foraging by the oldfield mouse (Peromyscus polionotus) by deploying foraging trays and live traps in experimental landscapes with 3 different patch types: patches connected with a corridor, unconnected patches with projecting corridorlike portions (winged patches), and unconnected rectangular patches. Corridors did not lead to different levels of activity of P. polionotus among the 3 patch types. Rather, corridors influenced activity by changing patch shape: foraging in seed trays and total number of captures of P. polionotus tended to be greater at the patch center than at the patch edge, but only in connected and winged patches where corridors or wings increased the amount of patch edge relative to the amount of core habitat in the patch. P. polionotus avoided open microhabitats near the patch edge in winged and connected patches, but not open microhabitats near the patch interior, suggesting that predation risk caused shifts in foraging near edges in connected and winged patches. Foraging in corridors and wings was generally low, suggesting that both are high-risk habitats where predation risk is not ameliorated by proximity to vegetative cover. By changing patch shape, corridors caused changes in within-patch activity of P. polionotus, changing foraging patterns and potentially altering the dynamics of P. polionotus and the seeds they consume.

  20. Oracle Applications Patch Administration Tool (PAT) Beta Version

    2002-01-04

    PAT is a Patch Administration Tool that provides analysis, tracking, and management of Oracle Application patches. This includes capabilities as outlined below: Patch Analysis & Management Tool Outline of capabilities: Administration Patch Data Maintenance -- track Oracle Application patches applied to what database instance & machine Patch Analysis capture text files (readme.txt and driver files) form comparison detail report comparison detail PL/SQL package comparison detail SQL scripts detail JSP module comparison detail Parse and loadmore » the current applptch.txt (10.7) or load patch data from Oracle Application database patch tables (11i) Display Analysis -- Compare patch to be applied with current Oracle Application installed Appl_top code versions Patch Detail Module comparison detail Analyze and display one Oracle Application module patch. Patch Management -- automatic queue and execution of patches Administration Parameter maintenance -- setting for directory structure of Oracle Application appl_top Validation data maintenance -- machine names and instances to patch Operation Patch Data Maintenance Schedule a patch (queue for later execution) Run a patch (queue for immediate execution) Review the patch logs Patch Management Reports« less

  1. Oracle Applications Patch Administration Tool (PAT) Beta Version

    SciTech Connect

    2002-01-04

    PAT is a Patch Administration Tool that provides analysis, tracking, and management of Oracle Application patches. This includes capabilities as outlined below: Patch Analysis & Management Tool Outline of capabilities: Administration Patch Data Maintenance -- track Oracle Application patches applied to what database instance & machine Patch Analysis capture text files (readme.txt and driver files) form comparison detail report comparison detail PL/SQL package comparison detail SQL scripts detail JSP module comparison detail Parse and load the current applptch.txt (10.7) or load patch data from Oracle Application database patch tables (11i) Display Analysis -- Compare patch to be applied with current Oracle Application installed Appl_top code versions Patch Detail Module comparison detail Analyze and display one Oracle Application module patch. Patch Management -- automatic queue and execution of patches Administration Parameter maintenance -- setting for directory structure of Oracle Application appl_top Validation data maintenance -- machine names and instances to patch Operation Patch Data Maintenance Schedule a patch (queue for later execution) Run a patch (queue for immediate execution) Review the patch logs Patch Management Reports

  2. A contour calculation method for rapid freeform reflector construction with ellipsoid patches

    NASA Astrophysics Data System (ADS)

    Zhuang, Zhenfeng; Yu, Feihong

    2014-03-01

    This paper presents a contour calculation method (CCM) for the freeform reflector design. Conservation of energy relates the light flux from a Lambertian-type point source to a desired irradiance and a discrete spot distribution on a target plane. This relationship determines the edges of the reflector patches, thus, enabling the design of a non-imaging freeform reflector based on a series of ellipsoid patches modeled as NURBS curves in Rhinoceros. As an example, we present a freeform reflector design composed of 6400 ellipsoid patches to illuminate a surface with 94% uniformity. A computer calculation takes 18.5 s.

  3. Regional relationships between geomorphic/hydrologic parameters and surface water chemistry relative to acidic deposition

    SciTech Connect

    Rochelle, B.P.; Liff, C.I.; Campbell, W.G.; Cassell, D.L.; Church, M.R.

    1989-01-01

    The authors determined geomorphic and hydrologic parameters for 144 forested, lake watersheds in the Northeast (NE) of the United States based primarily on measurements from topographic maps. These parameters were used to test for relationships with selected surface water chemistry relevant to acidic deposition. Analyses were conducted on regional and subregional scales delineated based on soils, land use, physiography, total sulfur deposition and statistical clustering of selected geomorphic/hydrologic parameters. Significant relationships were found among the geomorphic/hydrologic parameters and the surface water chemistry for the NE. Elevation had the most significant relationship with surface water chemistry, particularly in the mountainous areas of the NE. Other factors occurring consistently as significant predictors of surface water chemistry were maximum relief, relief ratio, runoff, and estimates of basin elongation. Results suggest that elevational parameters might be surrogates for other watershed characteristics, such as soils or spatial deposition patterns.

  4. Growth of boric acid crystallites on the surface of boron-doped silicon carbide samples

    SciTech Connect

    Vassen, R.; Stoever, D.

    1996-06-01

    White crystallites were visually observed on fractured or polished surfaces of SiC samples (grain sizes below {approx}500 nm) during exposure to air at room temperature for several days. Characterization of the crystallites by scanning electron microscopy, secondary ion mass spectroscopy, and X-ray diffraction identified B(OH){sub 3} crystals with a strong (002) texture. The rate of boric acid formation was determined by a gravimetric experiment. The rate of weight gain increased significantly after an incubation period of 1 week. Nucleation is initially the rate-limiting process. Subsequently small B(OH){sub 3} crystals form on the surface, whose growth rate is determined by grain boundary diffusion of boron to the SiC surface. An estimated grain boundary boron to the SiC surface. An estimated grain boundary diffusion coefficient of boron in SiC was many orders of magnitude higher than extrapolated literature values.

  5. Free energy considerations for nucleic acids with dangling ends near a surface: a coarse grained approach

    PubMed Central

    Ambia-Garrido, J.; Vainrub, Arnold; Pettitt, B. Montgomery

    2011-01-01

    A coarse grain model for the thermodynamics of nucleic acid hybridization near surfaces has been extended and parameterized to consider unpaired dangling end contributions. The parameters of the model differ when representing a double stranded DNA section, or a single stranded DNA section. The thermodynamic effects of the possibility of different dangling end combinations were considered in the presence of different types of surfaces. Configurational sampling was achieved by Metropolis Monte Carlo. To have a more complete picture of the free energy changes, an estimation of the conformational entropy was included. We find a strong thermodynamic effect for dangling mismatches due to sequence requirements when they are nearer the surface as opposed to being held away from the surface. PMID:21743128

  6. Free Energy Considerations for Nucleic Acids with Dangling Ends Near a Surface: a Coarse Grained Approach

    SciTech Connect

    Ambia Garrido, Joaquin; Vainrub, Arnold; Pettitt, Bernard M.

    2011-07-11

    A coarse grained model for the thermodynamics of nucleic acid hybridization near surfaces has been extended and parameterized to consider the contribution of unpaired dangling ends. Theparameters of the model differ when representing a double stranded DNA section or a single stranded DNA section. The thermodynamic effects of the possibility of different dangling end combinations were considered in the presence of different types of surfaces. Configurational sampling was achieved by the Metropolis Monte Carlo method. To gain a more complete picture of the free energy changes, an estimation of the conformational entropy was included. We find a strong thermodynamic effect for dangling mismatches due to sequence requirements when they are nearer the surface as opposed to being held away from the surface.

  7. Sterilization of polydimethylsiloxane surface with Chinese herb extract: a new antibiotic mechanism of chlorogenic acid

    PubMed Central

    Ren, Song; Wu, Ming; Guo, Jiayu; Zhang, Wang; Liu, Xiaohan; Sun, Lili; Holyst, Robert; Hou, Sen; Fang, Yongchun; Feng, Xizeng

    2015-01-01

    Coating of polydimethylsiloxane (PDMS) surface with a traditional Chinese herb extract chlorogenic acid (CA) solves the contemporary problem of sterilization of PDMS surface. The E. coli grows slower and has a higher death rate on the CA-coated PDMS surfaces. A smoother morphology of these E. coli cell wall is observed by atomic force microscopy (AFM). Unlike the reported mechanism, where CA inhibits bacterial growth by damaging the cell membrane in the bulk solution, we find the CA-coated PDMS surface also decreases the stiffness of the cell wall. A decrease in the Young’s modulus of the cell wall from 3 to 0.8 MPa is reported. Unexpectedly, the CA effect on the swarming ability and the biofilm stability of the bacteria can be still observed, even after they have been removed from the CA environment, indicating a decrease in their resistance to antibiotics for a prolonged time. The CA-coated PDMS surface shows better antibiotic effect against three types of both Gram-positive and Gran-negative bacteria than the gentamicin-coated PDMS surface. Coating of CA on PDMS surface not only solves the problem of sterilization of PDMS surface, but also shines light on the application of Chinese traditional herbs in scientific research. PMID:25993914

  8. Sterilization of polydimethylsiloxane surface with Chinese herb extract: a new antibiotic mechanism of chlorogenic acid.

    PubMed

    Ren, Song; Wu, Ming; Guo, Jiayu; Zhang, Wang; Liu, Xiaohan; Sun, Lili; Holyst, Robert; Hou, Sen; Fang, Yongchun; Feng, Xizeng

    2015-01-01

    Coating of polydimethylsiloxane (PDMS) surface with a traditional Chinese herb extract chlorogenic acid (CA) solves the contemporary problem of sterilization of PDMS surface. The E. coli grows slower and has a higher death rate on the CA-coated PDMS surfaces. A smoother morphology of these E. coli cell wall is observed by atomic force microscopy (AFM). Unlike the reported mechanism, where CA inhibits bacterial growth by damaging the cell membrane in the bulk solution, we find the CA-coated PDMS surface also decreases the stiffness of the cell wall. A decrease in the Young's modulus of the cell wall from 3 to 0.8 MPa is reported. Unexpectedly, the CA effect on the swarming ability and the biofilm stability of the bacteria can be still observed, even after they have been removed from the CA environment, indicating a decrease in their resistance to antibiotics for a prolonged time. The CA-coated PDMS surface shows better antibiotic effect against three types of both Gram-positive and Gran-negative bacteria than the gentamicin-coated PDMS surface. Coating of CA on PDMS surface not only solves the problem of sterilization of PDMS surface, but also shines light on the application of Chinese traditional herbs in scientific research. PMID:25993914

  9. Using ground-based geophysics to rapidly and accurately map sub-surface acidity

    NASA Astrophysics Data System (ADS)

    Wong, Vanessa; Triantafilis, John; Johnston, Scott; Nhan, Terence; Page, Donald; Wege, Richard; Hirst, Phillip; Slavich, Peter

    2013-04-01

    Globally, large areas of coastal and estuarine floodplains are underlain by sulfidic sediments and acid sulfate soils (ASS). These soils can be environmentally hazardous due to their high acidity and large pool of potentially mobile metals. The floodplains are characterised by high spatial and temporal heterogeneity. On coastal floodplains, ASS are of moderate to high salinity, with salts derived mainly from either connate marine sources or oxidation of biogenic sulfides and the subsequent increases in soluble ions (e.g. SO42-) and acidity that follow oxidation. Enhanced acidity also increases the mobilisation of pH-sensitive trace metals such as Fe, Al, Mn, Zn and Ni and contributes to increasing apparent salinity. Ground-based geophysics using electromagnetic (EM) induction techniques have been used successfully and extensively to rapidly map soils for salinity management and precision agriculture. EM induction techniques measure apparent soil electrical conductivity (ECa), which is a function of salinity, clay content, water content, soil mineralogy and temperature to determine the spatial distribution of sub-surface conductivity. In this study, we used ECa as a proxy to map the surface and sub-surface spatial distribution of ASS and associated acidic groundwater. Three EM instruments were used, EM38, DUALEM-421 and EM34, which focus on different depth layers, in a survey of a coastal floodplain in eastern Australia. The EM surveys were calibrated with limited soil sampling and analysis (pH, EC, soluble and exchangeable salts and metals, particle size and titratable actual acidity (TAA)). Using fuzzy k-means clustering analysis, the EM38 and elevation data, from a digital elevation model, clearly identified three classes in the near-surface (0-2m) layers: i) levee soils, ii) fluvial sediment capping and iii) ASS (Fig. 4). Increasing the number of classes did not alter the classes identified. Joint inversion of the DUALEM-421 and EM34 data also identified

  10. Riverine Landscape Patch Heterogeneity Drives Riparian Ant Assemblages in the Scioto River Basin, USA

    PubMed Central

    Tagwireyi, Paradzayi; Sullivan, S. Mažeika P.

    2015-01-01

    Although the principles of landscape ecology are increasingly extended to include riverine landscapes, explicit applications are few. We investigated associations between patch heterogeneity and riparian ant assemblages at 12 riverine landscapes of the Scioto River, Ohio, USA, that represent urban/developed, agricultural, and mixed (primarily forested, but also wetland, grassland/fallow, and exurban) land-use settings. Using remotely-sensed and ground-collected data, we delineated riverine landscape patch types (crop, grass/herbaceous, gravel, lawn, mudflat, open water, shrub, swamp, and woody vegetation), computed patch metrics (area, density, edge, richness, and shape), and conducted coordinated sampling of surface-active Formicidae assemblages. Ant density and species richness was lower in agricultural riverine landscapes than at mixed or developed reaches (measured using S [total number of species], but not using Menhinick’s Index [DM]), whereas ant diversity (using the Berger-Park Index [DBP]) was highest in agricultural reaches. We found no differences in ant density, richness, or diversity among internal riverine landscape patches. However, certain characteristics of patches influenced ant communities. Patch shape and density were significant predictors of richness (S: R2 = 0.72; DM: R2=0.57). Patch area, edge, and shape emerged as important predictors of DBP (R2 = 0.62) whereas patch area, edge, and density were strongly related to ant density (R2 = 0.65). Non-metric multidimensional scaling and analysis of similarities distinguished ant assemblage composition in grass and swamp patches from crop, gravel, lawn, and shrub as well as ant assemblages in woody vegetation patches from crop, lawn, and gravel (stress = 0.18, R2 = 0.64). These findings lend insight into the utility of landscape ecology to river science by providing evidence that spatial habitat patterns within riverine landscapes can influence assemblage characteristics of riparian arthropods

  11. Riverine Landscape Patch Heterogeneity Drives Riparian Ant Assemblages in the Scioto River Basin, USA.

    PubMed

    Tagwireyi, Paradzayi; Sullivan, S Mažeika P

    2015-01-01

    Although the principles of landscape ecology are increasingly extended to include riverine landscapes, explicit applications are few. We investigated associations between patch heterogeneity and riparian ant assemblages at 12 riverine landscapes of the Scioto River, Ohio, USA, that represent urban/developed, agricultural, and mixed (primarily forested, but also wetland, grassland/fallow, and exurban) land-use settings. Using remotely-sensed and ground-collected data, we delineated riverine landscape patch types (crop, grass/herbaceous, gravel, lawn, mudflat, open water, shrub, swamp, and woody vegetation), computed patch metrics (area, density, edge, richness, and shape), and conducted coordinated sampling of surface-active Formicidae assemblages. Ant density and species richness was lower in agricultural riverine landscapes than at mixed or developed reaches (measured using S [total number of species], but not using Menhinick's Index [DM]), whereas ant diversity (using the Berger-Park Index [DBP]) was highest in agricultural reaches. We found no differences in ant density, richness, or diversity among internal riverine landscape patches. However, certain characteristics of patches influenced ant communities. Patch shape and density were significant predictors of richness (S: R2 = 0.72; DM: R2=0.57). Patch area, edge, and shape emerged as important predictors of DBP (R2 = 0.62) whereas patch area, edge, and density were strongly related to ant density (R2 = 0.65). Non-metric multidimensional scaling and analysis of similarities distinguished ant assemblage composition in grass and swamp patches from crop, gravel, lawn, and shrub as well as ant assemblages in woody vegetation patches from crop, lawn, and gravel (stress = 0.18, R2 = 0.64). These findings lend insight into the utility of landscape ecology to river science by providing evidence that spatial habitat patterns within riverine landscapes can influence assemblage characteristics of riparian arthropods. PMID

  12. Microwave plasma induced grafting of oleic acid on cotton fabric surfaces

    NASA Astrophysics Data System (ADS)

    Cabrales, Luis; Abidi, Noureddine

    2012-03-01

    Cotton fabric surface was successfully functionalized with microwave plasma (2.45 GHz, 500 W) to impart water repellency. The hydrophobic agent used was oleic acid (CH3(CH2)7CHdbnd CH(CH2)7COOH), a fatty acid derived from various plant seed oils. Non-polymerizing gas (Argon) was used to create the plasma. The exposure of the cellulose to Ar-plasma generated radicals, which were subsequently used to initiate co-polymerization reactions with oleic acid. The FTIR spectra showed the presence of additional vibrations located at 2918, 2849, and 1707 cm-1 in the functionalized samples. Dynamic contact angle measurements were performed to assess the hydrophobic properties of the functionalized cotton fabric. The grafted cotton fabric showed excellent water repellency. In addition, the use of plant-derived monomers and biopolymers provides a different approach to use renewable resources to create functionalized biopolymeric substrates.

  13. Immobilization of lactobionic acid on the surface of cadmium sulfide nanoparticles and their interaction with hepatocytes.

    PubMed

    Kamruzzaman Selim, K M; Xing, Zhi-Cai; Guo, Haiqing; Kang, Inn-Kyu

    2009-09-01

    In the current study, beta-galactose-carrying lactobionic acid (LA) was conjugated on the surface of mercaptoacetic acid-coated cadmium sulfide nanoparticles (CSNPs) to ensure specific recognition of liver cells (hepatocytes) and to enhance biocompatibility. Maltotrionic acid-coated CSNPs (MCSNPs) were also prepared for use as a control. The results showed that LA-immobilized CSNPs (LCSNPs) were selectively and rapidly internalized into hepatocytes and emitted more intense fluorescence images as well as demonstrated increased biocompatible behavior in vitro than those of CSNPs and MCSNPs. Furthermore, the uptake amount of LCSNPs into hepatocytes was higher than that of CSNPs and MCSNPs. All these results indicate that LCSNPs may find ever-growing applications in biological labels and detection or contrast agents in life science and medical diagnostics. PMID:19365615

  14. Preparation of silver-poly(acrylamide-co-methacrylic acid) composite microspheres with patterned surface structures.

    PubMed

    Xia, Huiyun; Zhang, Ying; Peng, Junxia; Fang, Yu; Gu, Zhongze

    2006-01-01

    Acrylamide (AM) and methacrylic acid (MAA) copolymer microgels were prepared by a reverse suspension polymerization technique. The microgels were used as templates for the preparation of silver-poly(acrylamide-co-methacrylic acid) [Ag-P(AM-co-MAA)] composite microspheres. The surface structures of the microspheres prepared in this way are characterized by zigzag-like structures. It was found that the composition of the microgels, the nature and dosage of surfactants, the quantity of the metal, and even the reduction methods employed have a significant effect upon the surface structures of the microspheres. X-ray diffraction analysis confirmed that Ag formed during the process is in a crystal state of a face-centered cubic structure. PMID:24058232

  15. Key Role of Teichoic Acid Net Charge in Staphylococcus aureus Colonization of Artificial Surfaces

    PubMed Central

    Gross, Matthias; Cramton, Sarah E.; Götz, Friedrich; Peschel, Andreas

    2001-01-01

    Staphylococcus aureus is responsible for a large percentage of infections associated with implanted biomedical devices. The molecular basis of primary adhesion to artificial surfaces is not yet understood. Here, we demonstrate that teichoic acids, highly charged cell wall polymers, play a key role in the first step of biofilm formation. An S. aureus mutant bearing a stronger negative surface charge due to the lack of d-alanine esters in its teichoic acids can no longer colonize polystyrene or glass. The mutation abrogates primary adhesion to plastic while production of the glucosamine-based polymer involved in later steps of biofilm formation is not affected. Our data suggest that repulsive electrostatic forces can lead to reduced staphylococcal biofilm formation, which could have considerable impact on the design of novel implanted materials. PMID:11292767

  16. Disorganized Cortical Patches Suggest Prenatal Origin of Autism

    MedlinePlus

    ... brain tissue revealed patch-like areas of disorganized neurons. Arrows show a patch of decreased or absent ... autistic brain is speckled with patches of abnormal neurons, according to research partially funded by the National ...

  17. Computational Study of Acidic and Basic Functionalized Crystalline Silica Surfaces as a Model for Biomaterial Interfaces.

    PubMed

    Corno, Marta; Delle Piane, Massimo; Monti, Susanna; Moreno-Couranjou, Maryline; Choquet, Patrick; Ugliengo, Piero

    2015-06-16

    In silico modeling of acidic (CH2COOH) or basic (CH2NH2) functionalized silica surfaces has been carried out by means of a density functional approach based on a gradient-corrected functional to provide insight into the characterization of experimentally functionalized surfaces via a plasma method. Hydroxylated surfaces of crystalline cristobalite (sporting 4.8 OH/nm(2)) mimic an amorphous silica interface as unsubstituted material. To functionalize the silica surface we transformed the surface Si-OH groups into Si-CH2COOH and Si-CH2NH2 moieties to represent acidic/basic chemical character for the substitution. Structures, energetics, electronic, and vibrational properties were computed and compared as a function of the increasing loading of the functional groups (from 1 to 4 per surface unit cell). Classical molecular dynamics simulations of selected cases have been performed through a Reax-FF reactive force field to assess the mobility of the surface added chains. Both DFT and force field calculations identify the CH2NH2 moderate surface loading (1 group per unit cell) as the most stable functionalization, at variance with the case of the CH2COOH group, where higher loadings are preferred (2 groups per unit cell). The vibrational fingerprints of the surface functionalities, which are the ν(C═O) stretching and δ(NH2) bending modes for acidic/basic cases, have been characterized as a function of substitution percentage in order to guide the assignment of the experimental data. The final results highlighted the different behavior of the two types of functionalization. On the one hand, the frequency associated with the ν(C═O) mode shifts to lower wavenumbers as a function of the H-bond strength between the surface functionalities (both COOH and SiOH groups), and on the other hand, the δ(NH2) frequency shift seems to be caused by a subtle balance between the H-bond donor and acceptor abilities of the NH2 moiety. Both sets of data are in general agreement with

  18. Migration of a turbulent patch through a high-pressure turbine cascade

    NASA Astrophysics Data System (ADS)

    Wu, Xiaohua; Li, Lu Ting; St. Hilaire, Matthew

    2009-02-01

    We report two flow physics phenomena observed from direct numerical simulations on the migration and distortion of a turbulent patch inside a representative high-pressure turbine cascade. In the nonimpinging flow design, the upstream turbulent patch is on a trajectory offset from the blade leading edge, whereas in the impinging design the introduced turbulence impacts the stagnation. We found that in the nonimpinging flow, the original spanwisely continuous turbulent patch develops into long vortex tubes. They are quite persistent and are also nearly parallel to the blade pressure surface. In the impinging flow, slightly downstream of the leading edge, short vortex tubes form on the pressure side but not parallel to the local blade pressure surface, and they decay and fade away rapidly. Physical mechanisms responsible for these observed flow features are addressed. An additional simulation in which the turbulent patch migrates through a simple straight passage without the cascade is also reported.

  19. Deformation of vortex patches by boundaries

    NASA Astrophysics Data System (ADS)

    Crosby, A.; Johnson, E. R.; Morrison, P. J.

    2013-02-01

    The deformation of two-dimensional vortex patches in the vicinity of fluid boundaries is investigated. The presence of a boundary causes an initially circular patch of uniform vorticity to deform. Sufficiently far away from the boundary, the deformed shape is well approximated by an ellipse. This leading order elliptical deformation is investigated via the elliptic moment model of Melander, Zabusky, and Styczek [J. Fluid Mech. 167, 95 (1986), 10.1017/S0022112086002744]. When the boundary is straight, the centre of the elliptic patch remains at a constant distance from the boundary, and the motion is integrable. Furthermore, since the straining flow acting on the patch is constant in time, the problem is that of an elliptic vortex patch in constant strain, which was analysed by Kida [J. Phys. Soc. Jpn. 50, 3517 (1981), 10.1143/JPSJ.50.3517]. For more complicated boundary shapes, such as a square corner, the motion is no longer integrable. Instead, there is an adiabatic invariant for the motion. This adiabatic invariant arises due to the separation in times scales between the relatively rapid time scale associated with the rotation of the patch and the slower time scale associated with the self-advection of the patch along the boundary. The interaction of a vortex patch with a circular island is also considered. Without a background flow, the conservation of angular impulse implies that the motion is again integrable. The addition of an irrotational flow past the island can drive the patch towards the boundary, leading to the possibility of large deformations and breakup.

  20. Biomimetic vaterite formation at surfaces structurally templated by oligo(glutamic acid) peptides.

    PubMed

    Lu, Hao; Hood, Matthew A; Mauri, Sergio; Baio, Joe E; Bonn, Mischa; Muñoz-Espí, Rafael; Weidner, Tobias

    2015-11-14

    Previous studies have reported that the metastable vaterite phase of calcium carbonate can be stabilized in solution by acidic additives. Here we demonstrate that vaterite can also be stabilized directly at surfaces by engineered peptides. Our data show that the mineralisation occurs in a 'self-templating' process where calcium ions restructure the peptide backbone, which in turn allows for effective vaterite precipitation. PMID:26376942

  1. Surface-Active and Performance Properties of Cationic Imidazolinium Surfactants Based on Different Fatty Acids

    NASA Astrophysics Data System (ADS)

    Bajpai, Divya; Tyagi, V. K.

    Imidazoline surfactants belong to the category of cationic surfactants. Cationic surfactants are often quaternary nitrogen salts and are widely used both in nonaqueous systems and in applications such as textile softeners, dispersants, and emulsifiers. This study describes the surface-active properties of cationic imidazolinium surfactants synthesized from different fatty acids. Their laundry performance in combination with nonionic surfactants like detergency, foaming property, softening property, rewettability etc., is also emphasized.

  2. Biodegradable polyester films from renewable aleuritic acid: surface modifications induced by melt-polycondensation in air

    NASA Astrophysics Data System (ADS)

    Jesús Benítez, José; Alejandro Heredia-Guerrero, José; Inmaculada de Vargas-Parody, María; Cruz-Carrillo, Miguel Antonio; Morales-Flórez, Victor; de la Rosa-Fox, Nicolás; Heredia, Antonio

    2016-05-01

    Good water barrier properties and biocompatibility of long-chain biopolyesters like cutin and suberin have inspired the design of synthetic mimetic materials. Most of these biopolymers are made from esterified mid-chain functionalized ω-long chain hydroxyacids. Aleuritic (9,10,16-trihydroxypalmitic) acid is such a polyhydroxylated fatty acid and is also the major constituent of natural lac resin, a relatively abundant and renewable resource. Insoluble and thermostable films have been prepared from aleuritic acid by melt-condensation polymerization in air without catalysts, an easy and attractive procedure for large scale production. Intended to be used as a protective coating, the barrier's performance is expected to be conditioned by physical and chemical modifications induced by oxygen on the air-exposed side. Hence, the chemical composition, texture, mechanical behavior, hydrophobicity, chemical resistance and biodegradation of the film surface have been studied by attenuated total reflection–Fourier transform infrared spectroscopy (ATR–FTIR), atomic force microscopy (AFM), nanoindentation and water contact angle (WCA). It has been demonstrated that the occurrence of side oxidation reactions conditions the surface physical and chemical properties of these polyhydroxyester films. Additionally, the addition of palmitic acid to reduce the presence of hydrophilic free hydroxyl groups was found to have a strong influence on these parameters.

  3. Ab initio investigation of the adsorption of zoledronic acid molecule on hydroxyapatite (001) surface: an atomistic insight of bone protection

    NASA Astrophysics Data System (ADS)

    Ri, Mun-Hyok; Yu, Chol-Jun; Jang, Yong-Man; Kim, Song-Un

    2016-03-01

    We report a computational study of the adsorption of zoledronic acid molecule on hydroxyapatite (001) surface within ab initio density functional theory. The systematic study has been performed, from hydroxyapatite bulk and surface, and zoledronic acid molecule to the adsorption of the molecule on the surface. The optimized bond lengths and bond angles were obtained and analyzed, giving an evidence of structural similarity between subjects under study. The formation energies of hydroxyapatite (001) surfaces with two kinds of terminations were computed as about 1.2 and 1.5 J/m^2 with detailed atomistic structural information. We determined the adsorption energies of zoledronic acid molecule on the surfaces, which are -260 kJ/mol at 0.25 ML and -400 kJ/mol at 0.5 ML. An atomistic insight of strong binding affinity of zoledronic acid to the hydroxyapatite surface was given and discussed.

  4. Conjugation of Hyaluronic Acid onto Surfaces via the Interfacial Polymerization of Dopamine to Prevent Protein Adsorption.

    PubMed

    Huang, Renliang; Liu, Xia; Ye, Huijun; Su, Rongxin; Qi, Wei; Wang, Libing; He, Zhimin

    2015-11-10

    A versatile, convenient, and cost-effective method that can be used for grafting antifouling materials onto different surfaces is highly desirable in many applications. Here, we report the one-step fabrication of antifouling surfaces via the polymerization of dopamine and the simultaneous deposition of anionic hyaluronic acid (HA) on Au substrates. The water contact angle of the Au surfaces decreased from 84.9° to 24.8° after the attachment of a highly uniform polydopamine (PDA)/HA hybrid film. The results of surface plasmon resonance analysis showed that the Au-PDA/HA surfaces adsorbed proteins from solutions of bovine serum albumin, lysozyme, β-lactoglobulin, fibrinogen, and soybean milk in ultralow or low amounts (4.8-31.7 ng/cm(2)). The hydrophilicity and good antifouling performance of the PDA/HA surfaces is attributable to the HA chains that probably attached onto their upper surface via hydrogen bonding between PDA and HA. At the same time, the electrostatic repulsion between PDA and HA probably prevents the aggregation of PDA, resulting in the formation of a highly uniform PDA/HA hybrid film with the HA chains (with a stretched structure) on the upper surface. We also developed a simple method for removing this PDA/HA film and recycling the Au substrates by using an aqueous solution of NaOH as the hydrolyzing agent. The Au surface remained undamaged, and a PDA/HA film could be redeposited on the surface, with the surface exhibiting good antifouling performance even after 10 such cycles. Finally, it was found that this grafting method is applicable to other substrates, including epoxy resins, polystyrene, glass, and steel, owing to the strong adhesion of PDA with these substrates. PMID:26488547

  5. Role of surface lysine residues of adipocyte fatty acid-binding protein in fatty acid transfer to phospholipid vesicles.

    PubMed

    Liou, H L; Storch, J

    2001-05-29

    The tertiary structure of murine adipocyte fatty acid-binding protein (AFABP) is a flattened 10-stranded beta-barrel capped by a helix-turn-helix segment. This helical domain is hypothesized to behave as a "lid" or portal for ligand entry into and exit from the binding cavity. Previously, we demonstrated that anthroyloxy-labeled fatty acid (AOFA) transfer from AFABP to phospholipid membranes occurs by a collisional process, in which ionic interactions between positively charged lysine residues on the protein surface and negatively charged phospholipid headgroups are involved. In the present study, the role of specific lysine residues located in the portal and other regions of AFABP was directly examined using site-directed mutagenesis. The results showed that isoleucine replacement for lysine in the portal region, including the alphaI- and alphaII-helices and the beta C-D turn, resulted in much slower 2-(9-anthroyloxy)palmitate (2AP) transfer rates to acidic membranes than those of native AFABP. An additive effect was found for mutant K22,59I, displaying the slowest rates of FA transfer. Rates of 2AP transfer from "nonportal" mutants on the beta-G and I strands were affected only moderately; however, a lysine --> isoleucine mutation in the nonportal beta-A strand decreased the 2AP transfer rate. These studies suggest that lysines in the helical cap domain are important for governing ionic interactions between AFABP and membranes. Furthermore, it appears that more than one distinct region, including the alphaI-helix, alphaII-helix, beta C-D turn, and the beta-A strand, is involved in these charge-charge interactions. PMID:11371211

  6. Synthesis of Conjugated Chitosan and its Effect on Drug Permeation from Transdermal Patches

    PubMed Central

    Satheeshababu, B. K.; Shivakumar, K. L.

    2013-01-01

    The aim of this study was to synthesis the conjugated chitosan by covalent attachment of thiol moieties to the cationic polymer, mediated by a carbodiimide to improve permeation properties of chitosan. Thioglycolic acid was covalently attached to chitosan by the formation of amide bonds between the primary amino groups of the polymer and the carboxylic acid groups of thioglycolic acid. Hence, these polymers are called as thiomers or thiolated polymers. Conjugation of chitosan was confirmed by Fourier transform-infrared and differential scanning calorimetric analysis. Matrix type transdermal patches of carvedilol were prepared using the different proportions of chitosan and chitosan-thioglycolic acid conjugates (2:0, 1.7:0.3, 1.4:0.6, 1:1, 0.6:1.4 and 0.3:1.7) by solvent casting technique. Prepared matrix type patches were evaluated for their physicochemical characterization followed by in vitro evaluation. Selected formulations were subjected for their ex vivo studies on Wistar albino rat skin and human cadaver skin using the modified Franz diffusion cell. As the proportion of conjugated chitosan increased, the transdermal patches showed increased drug permeation. The mechanism of drug release was found to be nonFickian profiles. The present study concludes that the transdermal patches of carvedilol using conjugated chitosan with different proportions of chitosan were successfully developed to provide improved drug permeation. The transdermal patches can be a good approach to improve drug bioavailability by bypassing the extensive hepatic first-pass metabolism of the drug. PMID:24019564

  7. Routine patch testing with paraben esters.

    PubMed

    Menné, T; Hjorth, N

    1988-09-01

    Paraben esters are the most widely used preservatives in cosmetics and topical medicaments. Their sensitization potential is low, based on both experimental and human experience. A paraben mixture is included in the ICDRG standard series, and in patch test studies, approximately 1% of eczema patients react to it. The present study confirms this frequency in 8020 patients patch tested consecutively. Testing with the individual paraben esters was employed as confirmation, which makes it unlikely that the excited skin syndrome is a significant problem in this context. It remains undetermined whether the present paraben mixture is the optimal patch test material for diagnosing paraben sensitivity. PMID:3191679

  8. Surface enhanced raman spectroscopy on nucleic acids and related compounds adsorbed on colloidal silver particles

    NASA Astrophysics Data System (ADS)

    Kneipp, K.; Pohle, W.; Fabian, H.

    1991-04-01

    Various nucleic acids and related compounds have been investigated by surface enhanced Raman spectroscopy (SERS) on silver sol. The time delay between the addition of the various nucleic acids to the silver sol and the appearance of their SER spectra, i.e. the time needed by the various molecules to adsorb on an active site of the silver surface with an adsorption geometry which allows a SERS enhancement, shows strong differences. For instance, an immediate appearance of SER spectra has been found for DNA, whereas ribonucleic acids (RNAs) demonstrated a strong time delay (up to days) of the appearance of their SER spectra. This delay can be tentatively explained by the higher rigidity of RNA molecules compared with DNA. The more flexible DNA molecules are better adaptable to adsorption on silver than RNAs. The SER spectra of RNAs and DNAs showed strong changes within their relative line intensities as a function of time before they achieved stationary conditions, which indicates a protracted re-arrangement of the large molecules on the silver surface.

  9. Exceptionally crystalline and conducting acid doped polyaniline films by level surface assisted solution casting approach

    NASA Astrophysics Data System (ADS)

    Puthirath, Anand B.; Methattel Raman, Shijeesh; Varma, Sreekanth J.; Jayalekshmi, S.

    2016-04-01

    Emeraldine salt form of polyaniline (PANI) was synthesized by chemical oxidative polymerisation method using ammonium persulfate as oxidant. Resultant emeraldine salt form of PANI was dedoped using ammonia solution and then re-doped with camphor sulphonic acid (CSA), naphthaline sulphonic acid (NSA), hydrochloric acid (HCl), and m-cresol. Thin films of these doped PANI samples were deposited on glass substrates using solution casting method with m-cresol as solvent. A level surface was employed to get homogeneous thin films of uniform thickness. Detailed X-ray diffraction studies have shown that the films are exceptionally crystalline. The crystalline peaks observed in the XRD spectra can be indexed to simple monoclinic structure. FTIR and Raman spectroscopy studies provide convincing explanation for the exceptional crystallinity observed in these polymer films. FESEM and AFM images give better details of surface morphology of doped PANI films. The DC electrical conductivity of the samples was measured using four point probe technique. It is seen that the samples also exhibit quite high DC electrical conductivity, about 287 S/cm for CSA doped PANI, 67 S/cm for NSA doped PANI 65 S/cm for HCl doped PANI, and just below 1 S/cm for m-cresol doped PANI. Effect of using the level surface for solution casting is studied and correlated with the observed crystallinity.

  10. Textural and structural properties and surface acidity characterization of mesoporous silica-zirconia molecular sieves

    NASA Astrophysics Data System (ADS)

    Rodríguez-Castellón, E.; Jiménez-López, A.; Maireles-Torres, P.; Jones, D. J.; Rozière, J.; Trombetta, M.; Busca, G.; Lenarda, M.; Storaro, L.

    2003-11-01

    Homogeneous mesoporous zirconium-containing MCM-41 type silica were prepared by supramolecular templating and their textural and structural properties were studied using powder X-ray diffraction, N 2 porosimetry, atomic force microscopy, EXAFS, XPS, and UV-VIS-NIR diffuse reflectance spectroscopy. Their acid properties were also studied by using IR spectroscopy and by the use of catalytic tests such as the decomposition of isopropanol and the isomerization of 1-butene. The materials prepared show a good degree of crystallinity with a regular ordering of the pores into a hexagonal arrangement and high thermal stability. The specific surface area of the prepared materials decreases as the zirconium content rises. Zirconium atoms are in coordination 7 to 8 and located at the surface of the pores such that a high proportion of the oxygen atoms bonded to zirconium corresponds to surface non-condensed oxygen atoms. Both facts are responsible for the acid properties of the solids that show weak Brønsted and medium strong Lewis acidity.

  11. Trends in Formic Acid Decomposition on Model Transition Metal Surfaces: A Density Functional Theory Study

    SciTech Connect

    Herron, Jeffrey A.; Scaranto, Jessica; Ferrin, Peter A.; Li, Sha; Mavrikakis, Manos

    2014-12-05

    We present a first-principles, self-consistent periodic density functional theory (PW91-GGA) study of formic acid (HCOOH) decomposition on model (111) and (100) facets of eight fcc metals (Au, Ag, Cu, Pt, Pd, Ni, Ir, and Rh) and (0001) facets of four hcp (Co, Os, Ru, and Re) metals. The calculated binding energies of key formic acid decomposition intermediates including formate (HCOO), carboxyl (COOH), carbon monoxide (CO), water (H2O), carbon dioxide (CO2), hydroxyl (OH), carbon (C), oxygen (O), and hydrogen (H; H2) are presented. Using these energetics, we develop thermochemical potential energy diagrams for both the carboxyl-mediated and the formate-mediated dehydrogenation mechanisms on each surface. We evaluate the relative stability of COOH, HCOO, and other isomeric intermediates (i.e., CO + OH, CO2 + H, CO + O + H) on these surfaces. These results provide insights into formic acid decomposition selectivity (dehydrogenation versus dehydration), and in conjunction with calculated vibrational frequency modes, the results can assist with the experimental search for the elusive carboxyl (COOH) surface intermediate. Results are compared against experimental reports in the literature.

  12. Flexural waves focusing through shunted piezoelectric patches

    NASA Astrophysics Data System (ADS)

    Yi, K.; Collet, M.; Ichchou, M.; Li, L.

    2016-07-01

    In this paper, we designed and analyzed a piezo-lens to focus flexural waves in thin plates. The piezo-lens is comprised of a host plate and piezoelectric arrays bonded on the surfaces of the plate. The piezoelectric patches are shunted with negative capacitance circuits. The effective refractive indexes inside the piezo-lens are designed to fit a hyperbolic secant distribution by tuning the negative capacitance values. A homogenized model of a piezo-mechanical system is adopted in the designing process of the piezo-lens. The wave focusing effect is studied by the finite element method. Numerical results show that the piezo-lens can focus flexural waves by bending their trajectories, and is effective in a large frequency band. The piezo-lens has the ability to focus flexural waves at different locations by tuning the shunting negative capacitance values. The piezo-lens is shown to be effective for flexural waves generated by different types of sources.

  13. Polydivinylferrocene surface modified electrode for measuring state-of-charge of lead-acid battery

    NASA Astrophysics Data System (ADS)

    Lee, Todd; Singh, Pritam; Baker, Murray V.; Issa, Touma B.

    This paper outlines an investigation of the electrochemical behaviour of polymeric divinylferrocene (PDVF) produced by direct polymerisation of divinylferrocene (DVF) monomer on a glassy carbon substrate. The findings indicate that PDVF undergoes reversible reduction/oxidation in neutral and acidic aqueous media containing perchlorate (ClO 4 -) and sulfhate (SO 4 2-). The anodic peak potential of the PDVF shifts linearly to less positive potentials as the sulfuric acid (H 2SO 4) concentration is increased from 1 to 5 M. The polymer film strongly adheres to the glassy carbon surface and is electrochemically stable when subjected to repeated voltammetric cycling in the potential range of -0.2 to +0.8 V vs. Ag|AgCl. The potential of the partially oxidized film of PVDF on a glassy carbon substrate against a Ag|AgCl/KCl reference electrode in sulfuric acid solution is stable, reproducible and varies linearly with the acid concentration in the range of 1-5 M. This observation may be suitable for potentiometrically measuring the state-of-charge of lead-acid batteries.

  14. Temperature dependence of interfacial structures and acidity of clay edge surfaces

    NASA Astrophysics Data System (ADS)

    Liu, Xiandong; Lu, Xiancai; Cheng, Jun; Sprik, Michiel; Wang, Rucheng

    2015-07-01

    In the pursuit of a microscopic understanding of the effects of temperature on the surface reactivity of clay minerals, we conducted first principles molecular dynamics (FPMD) simulations to study the interfacial structures and acidity of clay edge surfaces at elevated temperatures. The common edge surfaces ((0 1 0) and (1 1 0) types) of phyllosilicates were investigated at 348 K and 423 K, and the results were compared with those previously derived at ambient conditions. We found that the stable surface sites are the same as at ambient conditions, including tbnd Al(OH2)2 (6-fold Al), tbnd Al(OH2) (5-fold Al) and tbnd Si(OH) on the (0 1 0) facet, and tbnd Al(OH2), tbnd Al(OH)Sitbnd and tbnd Si(OH) on the (1 1 0) surface. The FPMD-based vertical energy gap technique was applied to compute the acidity constants of edge sites and the resulting pKa values show a decreasing trend with temperature. The results demonstrate that although changes in the point of zero charge of the entire material are insignificant up to 348 K, the decrease in surface pKa can be 3 pKa units, while it can be as large as 6 pKa units up to 423 K. The derived interface structures and pKa values can be used in future experimental and modeling research, e.g., in interpreting experiments and predicting the surface complexation of metal cations and organics. This study therefore provides a physical basis for investigating the interfacial processes of clay minerals in environments that experience elevated P-T conditions, such as sedimentary basins and geological nuclear waste repositories.

  15. Microstrip patch antennas - Basic properties and some recent advances

    NASA Astrophysics Data System (ADS)

    Lee, Kai-Fong

    1989-10-01

    For high-speed moving vehicles, it is desirable for the antenna to be 'low profile'. One of the early low profile antennas is the slot antenna, the theory of which was developed by Professor Henry G. Booker in a classic paper published in 1946. During the last decade and a half, a relatively new class of radiators known as microstrip patch antennas has received much attention. In addition to being low profile and conformable to a shaped surface, these antennas offer the potential advantages of light weight, low cost, ruggedness, and compatibility with integrated circuit technology. The main disadvantages are narrow bandwidth and the problems associated with copper loss and spurious radiation when the elements form an array. This paper begins with a description of the basic features of microstrip patch antennas, followed by a presentation of some of the research aimed at improving the frequency response and gain, particularly those to which the author and his collaborators have made contributions.

  16. Microstrip patch antennas—basic properties and some recent advances

    NASA Astrophysics Data System (ADS)

    Kai-Fong, Lee

    1989-10-01

    For high-speed moving vehicles, it is desirable for the antenna to be "low profile". One of the early low profile antennas is the slot antenna, the theory of which was developed by Professor Henry G. Booker in a classic paper published in 1946. During the last decade and a half, a relatively new class of radiators known as microstrip patch antennas has received much attention. In addition to being low profile and conformable to a shaped surface, these antennas offer the potential advantages of light weight, low cost, ruggedness, and compatibility with integrated circuit technology. The main disadvantages are narrow bandwidth and the problems associated with copper loss and spurious radiation when the elements form an array. This paper begins with a description of the basic features of microstrip patch antennas, followed by a presentation of some of the research aimed at improving the frequency response and gain, particularly those to which the author and his collaborators have made contributions.

  17. One-step surface modification of poly(dimethylsiloxane) by undecylenic acid

    NASA Astrophysics Data System (ADS)

    Zhou, Jinwen; McInnes, Steven J. P.; Md Jani, Abdul Mutalib; Ellis, Amanda V.; Voelcker, Nicolas H.

    2008-12-01

    Poly(dimethylsiloxane) (PDMS) is a popular material for microfluidic devices due to its relatively low cost, ease of fabrication, oxygen permeability and optical transmission characteristics. However, its highly hydrophobic surface is still the main factor limiting its wide application, in particular as a material for biointerfaces. A simple and rapid method to form a relatively stable hydrophilised PDMS surface is reported in this paper. The PDMS surface was treated with pure undecylenic acid (UDA) for 10 min, 1 h and 1 day at 80 °C in a sealed container. The effects of the surface modification were investigated using water contact angle (WCA) measurements, Fourier transform infrared spectroscopy in attenuated total reflection mode (FTIR-ATR), and streaming zeta-potential analysis. The water contact angle of 1 day UDAmodified PDMS was found to decrease from that of native PDMS (110 °) to 75 °, demonstrating an increase in wettability of the surface. A distinctive peak at 1715 cm-1 in the FTIR-ATR spectra after UDA treatment was representative of carboxylation of the PDMS surface. The measured zeta-potential (ζ) at pH 4 changed from -27 mV for pure PDMS to -19 mV after UDA treatment. In order to confirm carboxylation of the surface visually, Lucifer Yellow CH fluorescence dye was reacted via a condensation reaction to the 1 day UDA modified PDMS surface. Fluorescent microscopy showed Lucifer Yellow CH fluorescence on the carboxylated surface, but not on the pure PDMS surface. Stability experiments were also performed showing that 1 day modified UDA samples were stable in both MilliQ water at 50 °C for 17 h, and in a desiccator at room temperature for 19.5 h.

  18. NIR surface enhanced Raman spectroscopy and bands assignment by DFT calculations of non-natural β-amino acids

    NASA Astrophysics Data System (ADS)

    Iliescu, T.; Maniu, D.; Chis, V.; Irimie, F. D.; Paizs, Cs.; Tosa, M.

    2005-04-01

    FT-Raman and NIR surface-enhanced Raman (SER) spectroscopies have been applied to the vibrational characterization of non-natural β-amino acids, 3-amino-3-(furan-2yl)-propionic acid and 3-amino-3-[(5-benzothiazole-2yl)-furan-2yl]-propionic acid. Semiempirical and density-functional theory (DFT) calculations on both amino acids in their zwitterionic forms have been performed in order to find the optimized structure and to compute the vibrational spectra. The NIR SER spectra in silver hydrosol and Ag-coated filter paper have been recorded, compared and analyzed. Good SER spectra were obtained at the pH values where dipolar ion structures are present proving the chemisorption of β-amino acid molecules on the silver surface via positively charged NH3+ group. The carboxylate anion of both β-amino acids are parallel oriented, whereas the plane of rings is oriented perpendicular to the silver surface.

  19. The sorption of humic acids to mineral surfaces and their roles in contaminant binding

    SciTech Connect

    Murphy, E.M.; Zachara, J.M.; Smith, S.C.; Phillips, J.L.

    1990-11-01

    Humic substances dissolved in groundwater may adsorb to certain mineral surfaces, rendering hydrophilic surfaces hydrophobic and making them sorbents for hydrophobic organic compounds (HOC). The sorption of humic and fulvic acids (International Humic Substance Society, IHSS, reference samples) on hematite and kaolinite was investigated to determine how natural organic coatings influence HOC sorption. The sorption behavior of the humic substances was consistent with a ligand-exchange mechanism, and the amount of sorption depended on the concentration of hydroxylated surface sites on the mineral and the properties of the humic substance. The sorption of the humic substances to two solids was proportional to their aromatic carbon content and inversely proportional to the O/C ratio. Increasing quantities of sorbed humic substances (f{sub oc}0.01 to 0. 5%) increased the sorption of carbazole, dibenzothiophene, and anthracene. Peat humic acid, the most aromatic coating, showed the greatest sorption enhancement of HOC when sorbed to hematite. In addition, HOC sorption was greater on organic coating formed at low ionic strength (I = 0.005) as compared to higher ionic strength (I = 0.1). We suggest that both the mineral surface and the ionic strength of the electrolyte affect the interfacial configuration of the sorbed humic substance, altering the size or accessibly of hydrophobic domains on the humic molecule to HOC. 30 refs., 5 figs.

  20. Modification of the cellulosic component of hemp fibers using sulfonic acid derivatives: Surface and thermal characterization.

    PubMed

    George, Michael; Mussone, Paolo G; Bressler, David C

    2015-12-10

    The aim of this study was to characterize the surface, morphological, and thermal properties of hemp fibers treated with two commercially available, inexpensive, and water soluble sulfonic acid derivatives. Specifically, the cellulosic component of the fibers were targeted, because cellulose is not easily removed during chemical treatment. These acids have the potential to selectively transform the surfaces of natural fibers for composite applications. The proposed method proceeds in the absence of conventional organic solvents and high reaction temperatures. Surface chemical composition and signature were measured using gravimetric analysis, X-ray photoelectron spectroscopy (XPS) and Fourier transform infra-red spectroscopy (FTIR). XPS data from the treated hemp fibers were characterized by measuring the reduction in O/C ratio and an increase in abundance of the C-C-O signature. FTIR confirmed the reaction with the emergence of peaks characteristic of disubstituted benzene and amino groups. Grafting of the sulfonic derivatives resulted in lower surface polarity. Thermogravimetric analysis revealed that treated fibers were characterized by lower percent degradation between 200 and 300 °C, and a higher initial degradation temperature. PMID:26428120

  1. Stereochemistry and thermal stability of tartaric acid on the intrinsically chiral Cu{531} surface

    NASA Astrophysics Data System (ADS)

    Baldanza, Silvia; Ardini, Jacopo; Giglia, Angelo; Held, Georg

    2016-01-01

    Intrinsically chiral metal surfaces provide enantiospecific reaction environments without the need of co-adsorbed modifiers. Amongst the intrinsically chiral copper surfaces, Cu{531} has the smallest unit cell and the highest density of chiral sites. XPS, NEXAFS and TPD were employed to investigate the adsorption and decomposition behaviour of the two chiral enantiomers of tartaric acid on this surface. The results obtained from XPS and NEXAFS show that at saturation coverage both enantiomers of tartaric acid adsorb in a μ4 configuration through the two carboxylic groups, which are rotated with respect to each other by 90° ± ≈ 15° within the surface plane. At intermediate coverage the R,R enantiomer adopts a similar configuration, but the S,S enantiomer is different and shows a high degree of dissociation. Growth of multilayers is observed at high exposures when the sample is kept at below 370 K. TPD experiments show that multilayers desorb between 390 K and 470 K and decomposition of the chemisorbed layer occurs between 470 K and 600 K. The desorption spectra support a two-step decomposition mechanism with a Odbnd Cdbnd Cdbnd O or HO-HCdbnd CH-OH intermediate that leads to production of CO2 and CO. Enantiomeric differences are observed in the desorption features related to the decomposition of the chemisorbed layer.

  2. Surface roughness of flowable resin composites eroded by acidic and alcoholic drinks

    PubMed Central

    Poggio, Claudio; Dagna, Alberto; Chiesa, Marco; Colombo, Marco; Scribante, Andrea

    2012-01-01

    Aim: The aim of this study is to evaluate the surface roughness of four flowable resin composites following exposure to acidic and alcoholic drinks. Materials and Methods: SureFil SDR flow, TetricEvoFlow, Esthet-X Flow and Amaris Flow HT samples were immersed in artificial saliva, Coca Cola and Chivas Regal Whisky. Each specimen was examined using a Leica DCM 3D microscope: Arithmetical mean height of the surface profiles was measured (Sa). Results: Kruskal-Wallis test showed significant differences among various groups (P<0,001). Mann Whitney test was applied and control groups showed significantly lower Sa values than other groups (P=0,008). Coca Cola groups showed highest Sa values (P<0,021). No significant differences (P=0,14) in surface texture were found among the specimens of the different materials. No significant differences were found among TetricEvoFlow, Esthet-X Flow and Amaris Flow under control conditions nor after Coca Cola application. Under control condition and after Coca Cola application SureFil SDR flow showed significantly higher Sa values. Moreover, after whisky application Amaris Flow showed significantly lower Sa values then the other three groups that showed no significant differences among them. Conclusions: Acidic and alcoholic drinks eroded the surface roughness of all evaluated flowable resin composites. PMID:22557811

  3. Nitsche's method for two and three dimensional NURBS patch coupling

    NASA Astrophysics Data System (ADS)

    Nguyen, Vinh Phu; Kerfriden, Pierre; Brino, Marco; Bordas, Stéphane P. A.; Bonisoli, Elvio

    2014-06-01

    We present a Nitche's method to couple non-conforming two and three-dimensional non uniform rational b-splines (NURBS) patches in the context of isogeometric analysis. We present results for linear elastostatics in two and and three-dimensions. The method can deal with surface-surface or volume-volume coupling, and we show how it can be used to handle heterogeneities such as inclusions. We also present preliminary results on modal analysis. This simple coupling method has the potential to increase the applicability of NURBS-based isogeometric analysis for practical applications.

  4. Ethinyl Estradiol and Norelgestromin Transdermal Patch

    MedlinePlus

    ... contraceptive patch is a very effective method of birth control, but it does not prevent the spread of ... period, you must use a backup method of birth control (such as a condom and/or a spermicide) ...

  5. Scattering from arbitrarily shaped microstrip patch antennas

    NASA Technical Reports Server (NTRS)

    Shively, David G.; Deshpande, Manohar D.; Cockrell, Capers R.

    1992-01-01

    The scattering properties of arbitrarily shaped microstrip patch antennas are examined. The electric field integral equation for a current element on a grounded dielectric slab is developed for a rectangular geometry based on Galerkin's technique with subdomain rooftop basis functions. A shape function is introduced that allows a rectangular grid approximation to the arbitrarily shaped patch. The incident field on the patch is expressed as a function of incidence angle theta(i), phi(i). The resulting system of equations is then solved for the unknown current modes on the patch, and the electromagnetic scattering is calculated for a given angle. Comparisons are made with other calculated results as well as with measurements.

  6. Arachidonic acid and prostaglandin E2 influence human osteoblast (MG63) response to titanium surface roughness.

    PubMed

    Dean, David D; Campbell, Casey M; Gruwell, Scott F; Tindall, John W M; Chuang, Hui-Hsiu; Zhong, Weinan; Schmitz, John P; Sylvia, Victor L

    2008-01-01

    Prior studies have shown that implant surface roughness affects osteoblast proliferation, differentiation, matrix synthesis, and local factor production. Further, cell response is modulated by systemic factors, such as 1,25(OH)2D3 and estrogen as well as mechanical forces. Based on the fact that peri-implant bone healing occurs in a site containing elevated amounts of prostaglandin E2 (PGE2), the hypothesis of the current study is that PGE2 and arachidonic acid (AA), the substrate used by cyclooxygenase to form PGE2, influence osteoblast response to implant surface roughness. To test this hypothesis, 4 different types of commercially pure titanium (cpTi) disks with surfaces of varying roughness (smooth Ti, R(a) 0.30 microm; smooth and acid etched Ti [SAE Ti], R(a) 0.40 microm; rough Ti, R(a) 4.3 microm; rough and acid etched Ti [RAE Ti], R(a) 4.15 (microm) were prepared. MG63 osteoblasts were seeded onto the surfaces, cultured to confluence, and then treated for the last 24 hours of culture with AA (0, 0.1, 1, and 10 nM), PGE2 (0, 1, 10, 25, and 100 nM), or the general cyclooxygenase inhibitor indomethacin (0 or 100 nM). At harvest, the effect of treatment on cell proliferation was assessed by measuring cell number and [3H]-thymidine incorporation, and the effect on cell differentiation was determined by measuring alkaline phosphatase (ALP) specific activity. The effect of AA and PGE2 on cell number was somewhat variable but showed a general decrease on plastic and smooth surfaces and an increase on rough surfaces. In contrast, [3H]-thymidine incorporation was uniformly decreased with treatment on all surfaces. ALP demonstrated the most prominent effect of treatment. On smooth surfaces, AA and PGE2 dose-dependently increased ALP, while on rough surfaces, treatment dose-dependently decreased enzyme specific activity. Indomethacin treatment had either no effect or a slightly inhibitory effect on [3H]-thymidine incorporation on all surfaces. In contrast, indomethacin

  7. Relation between acid back-diffusion and luminal surface hydrophobicity in canine gastric mucosa: Effects of salicylate and prostaglandin

    SciTech Connect

    Goddard, P.J.

    1989-01-01

    The stomach is thought to be protected from luminal acid by a gastric mucosal barrier that restricts the diffusion of acid into tissue. This study tested the hypothesis that the hydrophobic luminal surface of canine gastric mucosa incubated in Ussing chambers, impedes the back-diffusion of luminal acid into the tissue. Isolated sheets of mucosa were treated with cimetidine to inhibit spontaneous acid secretion, and incubated under conditions that prevented significant secretion of luminal bicarbonate. By measuring acid loss from the luminal compartment using the pH-stat technique, acid back-diffusion was continuously monitored; potential difference (PD) was measured as an index of tissue viability. Tissue luminal surface hydrophobicity was estimated by contact angle analysis at the end of each experiment. Addition of 16,16-dimethyl prostaglandin E{sub 2} to the nutrient compartment enhanced luminal surface hydrophobicity, but did not reduce acid back-diffusion in tissues that maintained a constant PD. 10 mM salicylate at pH 4.00 in the luminal compartment reduced surface hydrophobicity, but this decrease did not occur if 1 ug/ml prostaglandin was present in the nutrient solution. Despite possessing relatively hydrophilic and relatively hydrophobic surface properties, respectively, acid back-diffusion in the absence of salicylate was not significantly different between these two groups. Neither group maintained a PD after incubation with salicylate. Lastly, radiolabeled salicylate was used to calculate the free (non-salicylate associated) acid loss in tissues incubated with salicylate and/or prostaglandin. No significant correlation was found between free acid back-diffusion and luminal surface hydrophobicity. These data do not support the hypothesis that acid back-diffusion in impeded by the hydrophobic surface presented by isolated canine gastric mucosa.

  8. Surface and interlayer base-characters in lepidocrocite titanate: The adsorption and intercalation of fatty acid

    NASA Astrophysics Data System (ADS)

    Maluangnont, Tosapol; Arsa, Pornanan; Limsakul, Kanokporn; Juntarachairot, Songsit; Sangsan, Saithong; Gotoh, Kazuma; Sooknoi, Tawan

    2016-06-01

    While layered double hydroxides (LDHs) with positively-charged sheets are well known as basic materials, layered metal oxides having negatively-charged sheets are not generally recognized so. In this article, the surface and interlayer base-characters of O2- sites in layered metal oxides have been demonstrated, taking lepidocrocite titanate K0.8Zn0.4Ti1.6O4 as an example. The low basicity (0.04 mmol CO2/g) and low desorption temperature (50-300 °C) shown by CO2- TPD suggests that O2- sites at the external surfaces is weakly basic, while those at the interlayer space are mostly inaccessible to CO2. The liquid-phase adsorption study, however, revealed the uptake as much as 37% by mass of the bulky palmitic acid (C16 acid). The accompanying expansion of the interlayer space by ~0.1 nm was detected by PXRD and TEM. In an opposite manner to the external surfaces, the interlayer O2- sites can deprotonate palmitic acid, forming the salt (i.e., potassium palmitate) occluded between the sheets. Two types of basic sites are proposed based on ultrafast 1H MAS NMR and FTIR results. The interlayer basic sites in lepidocrocite titanate leads to an application of this material as a selective and stable two-dimensional (2D) basic catalyst, as demonstrated by the ketonization of palmitic acid into palmitone (C31 ketone). Tuning of the catalytic activity by varying the type of metal (Zn, Mg, and Li) substituting at TiIV sites was also illustrated.

  9. Forest patch height uncertainty from spaceborne data in the taiga-tundra ecotone

    NASA Astrophysics Data System (ADS)

    Montesano, P. M.; Sun, G.; Ranson, J.; Dubayah, R.

    2014-12-01

    In the taiga-tundra ecotone (TTE), vegetation structure change can be subtle and site-dependent, yet occur across broad scales. Recent remote sensing studies have highlighted the degree to which vegetation structure in the TTE can be characterized with spaceborne remote sensing at the plot-scale. These studies demonstrate the fundamental uncertainty of space-based local-scale vertical structure measurements that are available across broad scales and provide the opportunity to understand regional variation in detailed vegetation characteristics. Patch-scale analyses of vegetation structure provide a means to examine vertical structure and horizontal patch form, their association with landscape characteristics, and a basis for examining the variation of change in patch characteristics across sites. In this study we delineate forest patches in study sites along the TTE in northern Siberia with high resolution (0.5 - 3m) spaceborne imagery (HRSI) and attribute patches with tree cover and spectral data from Landsat 7, backscatter power from ALOS PALSAR and canopy height data based on a HRSI-derived digital surface model and ICESat-GLAS ground elevation. We examine the uncertainty of forest patch height from this suite of spaceborne medium and high resolution optical, radar, and LiDAR data. Results demonstrate the potential and limits of spaceborne estimates of patch-scale forest height whose differences are often small, biophysically relevant, and subject to variable rates of change across the broad-scale of the circumpolar TTE.

  10. Extending the Diffuse Layer Model of Surface Acidity Constant Behavior: II. Estimation of Intrinsic Acidity and Electrolyte Ion Site Binding Constants

    EPA Science Inventory

    The two-pK metal oxide surface acidity constant model relies on generic mass action expressions of the form: Ka = [>SOHx-1x-2]aH+EXP(-ΔGexcess/RT)/[>SOHxX-l] where x equals 1 or 2. While all current two-pK surface complexation models require numerical estimates of "intrinsic" aci...

  11. Surface modification of activated carbon for enhanced adsorption of perfluoroalkyl acids from aqueous solutions.

    PubMed

    Zhi, Yue; Liu, Jinxia

    2016-02-01

    The objective of the research was to examine the effect of increasing carbon surface basicity on uptake of perfluorooctane sulfonic (PFOS) and carboxylic acids (PFOA) by activated carbon. Granular activated carbons made from coal, coconut shell, wood, and phenolic-polymer-based activated carbon fibers were modified through high-temperature and ammonia gas treatments to facilitate systematical evaluation of the impact of basicity of different origins. Comparison of adsorption isotherms and adsorption distribution coefficients showed that the ammonia gas treatment was more effective than the high-temperature treatment in enhancing surface basicity. The resultant higher point of zero charges and total basicity (measured by total HCl uptake) correlated with improved adsorption affinity for PFOS and PFOA. The effectiveness of surface modification to enhance adsorption varied with carbon raw material. Wood-based carbons and activated carbon fibers showed enhancement by one to three orders of magnitudes while other materials could experience reduction in adsorption towards either PFOS or PFOA. PMID:26469934

  12. Versatile, tannic acid-mediated surface PEGylation for marine antifouling applications.

    PubMed

    Kim, Suyeob; Gim, Taewoo; Kang, Sung Min

    2015-04-01

    In this study, we report a facile and versatile approach to the formation of marine antifouling surface coatings. The approach consists of a combined coating of polydopamine (pDA) and tannic acid (TA) and subsequent immobilization of polyethylene glycol (PEG) on solid substrates. TA coating of a pDA-coated surface was carried out using iron(III) coordination chemistry, and PEG was immobilized on the TA-coated surface via hydrogen bond formation. Stainless steel and nylon were successfully modified by this approach, and the resulting substrates were used for marine antifouling applications, in which diatom adhesion was significantly inhibited. Advantageously, this approach allowed marine antifouling coatings to be prepared by a simple immersion process under environmentally friendly conditions. PMID:25756241

  13. Phytic acid adsorption on the copper surface: Observation of electrochemistry and Raman spectroscopy

    NASA Astrophysics Data System (ADS)

    Shen, Shu; Guo, Xiao-yu; Song, Ping; Pan, Ying-Cheng; Wang, Hao-qiong; Wen, Ying; Yang, Hai-Feng

    2013-07-01

    The adsorption of phytic acid (PA) on copper was investigated using electrochemical impedance spectroscopy (EIS), electrochemical polarization measurement and surface-enhanced Raman scattering (SERS) spectroscopy. Electrochemical results indicated that inhibition efficiency of PA film for copper from corrosion in 3 wt% NaCl solution was beyond 80% at an optimum self-assembly concentration of 0.1 mM for 6 h. Electrochemical polarization indicated that PA functioned as a cathodic inhibitor. In addition, Raman studies showed that PA adsorbed on the copper surface formed via P-O groups. Finally, the value of ΔGads (-39.96 kJ mol-1) was close to -40 kJ mol-1, suggesting that the adsorption of PA on the copper surface was the chemical adsorption.

  14. Nitric Acid-Sea Salt Reactions: Implications for Nitrogen Deposition to Water Surfaces.

    NASA Astrophysics Data System (ADS)

    Pryor, S. C.; Sørensen, L. L.

    2000-05-01

    Many previous studies have indicated the importance of nitric acid (HNO3) reactions on sea salt particles for flux divergence of HNO3 in the marine surface layer. The potential importance of this reaction in determining the spatial and temporal patterns of nitrogen dry deposition to marine ecosystems is investigated using models of sea spray generation and particle- and gas-phase dry deposition. Under horizontally homogeneous conditions with near-neutral stability and for wind speeds between 3.5 and 10 m s1, transfer of HNO3 to the particle phase to form sodium nitrate may decrease the deposition velocity of nitrogen by over 50%, leading to greater horizontal transport prior to deposition to the sea surface. Conversely, for wind speeds above 10 m s1, transfer of nitrogen to the particle phase would increase the deposition rate and hence decrease horizontal transport prior to surface removal.

  15. An evaluation of patch connectivity measures.

    PubMed

    Prugh, Laura R

    2009-07-01

    Measuring connectivity is critical to the study of fragmented populations. The three most commonly used types of patch connectivity measures differ substantially in how they are calculated, but the performance of these measures has not been broadly assessed. Here I compare the ability of nearest neighbor (NN), buffer, and incidence function model (IFM) measures to predict the patch occupancy and colonization patterns of 24 invertebrate, reptile, and amphibian metapopulations. I predicted that NN measures, which have been criticized as being overly simplistic, would be the worst predictors of species occupancy and colonization. I also predicted that buffer measures, which sum the amount of habitat in a radius surrounding the focal patch, would have intermediate performance, and IFM measures, which take into account the areas and distances to all potential source patches, would perform best. As expected, the simplest NN measure (distance to the nearest habitat patch, NHi) was the poorest predictor of patch occupancy and colonization. Contrary to expectations, however, the next-simplest NN measure (distance to the nearest occupied [source] patch, NSi) was as good a predictor of occupancy and colonization as the best-performing buffer measure and the general IFM measure Si. In contrast to previous studies suggesting that area-based connectivity measures perform better than distance-based ones, my results indicate that the exclusion of vacant habitat patches from calculations is the key to improved measure performance. I highlight several problems with the parameterization and use of IFM measures and suggest that models based on NSi are equally powerful and more practical for many conservation applications. PMID:19688936

  16. Aspects and applications of patched grid calculations

    NASA Technical Reports Server (NTRS)

    Walters, Robert W.; Switzer, George F.; Thomas, James L.

    1991-01-01

    Patched grid calculations within the framework of an implicit, flux vector split upwind/relaxation algorithm for the Euler equations are presented. Aspects of computing on patched grids are discussed including the effect of a metric-discontinuous interface on the convergence rate of the algorithm, and the effect of curvature along an interface. Applications to a converging-diverging nozzle including effects of choking and bypass slots in two dimensions are presented.

  17. Pericardial patch venoplasty heals via attraction of venous progenitor cells.

    PubMed

    Bai, Hualong; Wang, Mo; Foster, Trenton R; Hu, Haidi; He, Hao; Hashimoto, Takuya; Hanisch, Jesse J; Santana, Jeans M; Xing, Ying; Dardik, Alan

    2016-06-01

    Pericardial patches are commonly used during cardiovascular surgery to close blood vessels. In arteries, patches accumulate arterial progenitor cells; we hypothesized that venous patches would accumulate venous progenitor cells, in the absence of arterial pressure. We developed a novel rat inferior vena cava (IVC) venotomy model and repaired it with a pericardial patch. Cells infiltrated the patch to form a thick neointima by day 7; some cells were CD34(+)/VEGFR2(+) and CD31(+)/Eph-B4(+) consistent with development of venous identity in the healing patch. Compared to arterial patches, the venous patches had increased neointimal thickness at day 7 without any pseudoaneurysms. Addition of an arteriovenous fistula (AVF) to increase blood flow on the patch resulted in reduced patch neointimal thickness and proliferation, but neointimal thickness was not reversible with AVF ligation. These results show that rat patch venoplasty is a novel model of aggressive venous neointimal hyperplasia. PMID:27354544

  18. Reversible Bacterial Adhesion on Mixed Poly(dimethylaminoethyl methacrylate)/Poly(acrylamidophenyl boronic acid) Brush Surfaces.

    PubMed

    Xiong, Xinhong; Wu, Zhaoqiang; Yu, Qian; Xue, Lulu; Du, Jun; Chen, Hong

    2015-11-10

    A simple and versatile method for the preparation of surfaces to control bacterial adhesion is described. Substrates were first treated with two catechol-based polymerization initiators, one for thermal initiation and one for visible-light photoinitiation. Graft polymerization in sequence of dimethylaminoethyl methacrylate (DMAEMA) and 3-acrylamidebenzene boronic acid (BA) from the surface-bound initiators to form mixed polymer brushes on the substrate was then carried out. The PDMAEMA grafts were thermally initiated and the PBA grafts were visible-light-photoinitiated. Gold, poly(vinyl chloride) (PVC), and poly(dimethylsiloxane) (PDMS) were used as model substrates. X-ray photoelectron spectroscopy (XPS), Fourier transform infrared (FT-IR), and ellipsometry analysis confirmed the successful grafting of PDMAEMA/PBA mixed brushes. We demonstrated that the resulting surfaces showed charge-reversal properties in response to change of pH. The transition in surface charge at a specific pH allowed the surface to be reversibly switched from bacteria-adhesive to bacteria-resistant. At pH 4.5, below the isoelectric points (IEP, pH 5.3) of the mixed brushes, the surfaces are positively charged and the negatively charged Gram-positive S. aureus adheres at high density (2.6 × 10(6) cells/cm(2)) due to attractive electrostatic interactions. Subsequently, upon increasing the pH to 9.0 to give negatively charged polymer brush surface, ∼90% of the adherent bacteria are released from the surface, presumably due to repulsive electrostatic interactions. This approach provides a simple method for the preparation of surfaces on which bacterial adhesion can be controlled and is applicable to a wide variety of substrates. PMID:26509287

  19. Acid base surface properties of glass-ionomers determined by IGC

    NASA Astrophysics Data System (ADS)

    Voelkel, A.; Andrzejewska, E.; Limanowska-Shaw, H.; Andrzejewski, M.

    2005-05-01

    SummaryThe surface properties of several glass-ionomer restorative dental materials (GC Fuji, Chemadent G-J, Ketac Fil and Ketac Molar) were investigated by means of inverse gas chromatography. The capacity of the surface of glass-ionomers to undergo specific interactions was expressed using the specific component of free energy Δ Gs as well as the parameters KA and KD to describe the ability of the cement to act both as an electron acceptor and an electron donor, respectively. The character of the examined surface was expressed with the use of the SC parameter. All these parameters were determined with a high degree of precision. It was found that the surface of glass-ionomer cements had a well-marked acidic character. The ability of the cement surface to take part in specific interactions differed with the various types of commercial products. The surface activity of the glass-ionomers investigated changed with the storage time (up to 6 months) indicating an on-going setting reaction.

  20. Pulse Dynamics in Endocytic Protein Patches

    NASA Astrophysics Data System (ADS)

    Carlsson, Anders; Wang, Xinxin

    2015-03-01

    During the process of endocytosis in yeast, submicron-sized protein patches assemble, exert forces on the membrane to bend it, and finally disassemble. The patches contain an initial coat that establishes the endocytic site and binds cargo, polymers of the protein actin, ``nucleation-promoting factors'' (NPFs) that catalyze actin polymerization, and curvature-generating proteins. We model the dynamics of protein patches in yeast using a variant of the activator-inhibitor ``Fitzhugh-Nagumo'' model. We treat NPFs as the activator, and polymerized actin as the inhibitor, on the basis of findings that the lifetime of NPF patches is extended when actin polymerization is inhibited. Using this model, we find that as the polymerization rate is reduced, there is a discontinuous transition from protein pulses to persistent patches. We also find, surprisingly, that in some parameter regimes reducing the polymerization rate can increase the polymerized-actin content of the patch. We present data for NPF dynamics budding yeast, which confirm some of the predictions of the model. Supported by NIH under Grant R01-GM107667.

  1. PatchSurfers: Two methods for local molecular property-based binding ligand prediction.

    PubMed

    Shin, Woong-Hee; Bures, Mark Gregory; Kihara, Daisuke

    2016-01-15

    Protein function prediction is an active area of research in computational biology. Function prediction can help biologists make hypotheses for characterization of genes and help interpret biological assays, and thus is a productive area for collaboration between experimental and computational biologists. Among various function prediction methods, predicting binding ligand molecules for a target protein is an important class because ligand binding events for a protein are usually closely intertwined with the proteins' biological function, and also because predicted binding ligands can often be directly tested by biochemical assays. Binding ligand prediction methods can be classified into two types: those which are based on protein-protein (or pocket-pocket) comparison, and those that compare a target pocket directly to ligands. Recently, our group proposed two computational binding ligand prediction methods, Patch-Surfer, which is a pocket-pocket comparison method, and PL-PatchSurfer, which compares a pocket to ligand molecules. The two programs apply surface patch-based descriptions to calculate similarity or complementarity between molecules. A surface patch is characterized by physicochemical properties such as shape, hydrophobicity, and electrostatic potentials. These properties on the surface are represented using three-dimensional Zernike descriptors (3DZD), which are based on a series expansion of a 3 dimensional function. Utilizing 3DZD for describing the physicochemical properties has two main advantages: (1) rotational invariance and (2) fast comparison. Here, we introduce Patch-Surfer and PL-PatchSurfer with an emphasis on PL-PatchSurfer, which is more recently developed. Illustrative examples of PL-PatchSurfer performance on binding ligand prediction as well as virtual drug screening are also provided. PMID:26427548

  2. Repair of Full-Thickness Defects in Alimentary Tract Wall With Patches of Expanded Polytetrafluoroethylene

    PubMed Central

    Oh, Daniel S.; Manning, Melanie M.; Emmanuel, Janson; Broyles, Stuart E.; Stone, H. Harlan

    2002-01-01

    Objectives To test the efficacy of patches of expanded polytetrafluoroethylene (ePTFE) for the repair of full-thickness defects in alimentary tract wall. Summary Background Data A recent report of successful replacement of duodenal wall with patches of ePTFE was met with skepticism and clearly warranted confirmation as well as evaluation in repair of other segments of the abdominal intestinal tract. Methods Defects of 4 cm2 were created in various segments of canine abdominal alimentary tract (stomach, duodenum, small bowel, and colon) as well as in bladder dome. For the duodenum in 13 dogs, three different ePTFE fabrications were used: CVX (cardiovascular), PDX (preclude dura membrane), and DLM (dual mesh plus). In repair of the other areas in six dogs, the PDX patch was used. When the animals were killed, both gross inspection of the parietes and tissue for histologic study became the basis for evaluation. Peritoneal and intraluminal cultures of the specific study viscera were also taken. Results There were no patch failures. Only six significant adhesions were noted in 3 of the 19 dogs. Serosal surface healing was complete without exception by 1 week in all animals. Patches of CVX and PDX had heaping mucosa at the margin of well-sealed patch edges in the study involving duodenum. However, the DLM patch had an undergrowth of mucosa with partial patch separation by 1 week, beginning patch extrusion into gut lumen at 3 weeks, and total separation of patch with complete mucosal repair at 6 weeks. The fate of the PDX patches at 6 weeks in stomach, small bowel, colon, and bladder was identical to what had been observed for the PDX patch in the duodenum. All peritoneal and bladder cultures had no growth, whereas the contents of the alimentary tract grew expected flora. Conclusions These observations suggest that ePTFE may well be an acceptable membrane for at least temporary replacement of full-thickness hollow viscus defects, even in the face of heavy bacterial

  3. Short-term monocular patching boosts the patched eye’s response in visual cortex

    PubMed Central

    Zhou, Jiawei; Baker, Daniel H.; Simard, Mathieu; Saint-Amour, Dave; Hess, Robert F.

    2015-01-01

    Abstract Purpose: Several recent studies have demonstrated that following short-term monocular deprivation in normal adults, the patched eye, rather than the unpatched eye, becomes stronger in subsequent binocular viewing. However, little is known about the site and nature of the underlying processes. In this study, we examine the underlying mechanisms by measuring steady-state visual evoked potentials (SSVEPs) as an index of the neural contrast response in early visual areas. Methods: The experiment consisted of three consecutive stages: a pre-patching EEG recording (14 minutes), a monocular patching stage (2.5 hours) and a post-patching EEG recording (14 minutes; started immediately after the removal of the patch). During the patching stage, a diffuser (transmits light but not pattern) was placed in front of one randomly selected eye. During the EEG recording stage, contrast response functions for each eye were measured. Results: The neural responses from the patched eye increased after the removal of the patch, whilst the responses from the unpatched eye remained the same. Such phenomena occurred under both monocular and dichoptic viewing conditions. Conclusions: We interpret this eye dominance plasticity in adult human visual cortex as homeostatic intrinsic plasticity regulated by an increase of contrast-gain in the patched eye. PMID:26410580

  4. Effects of Polyunsaturated Fatty Acids in Growth Medium on Lipid Composition and on Physicochemical Surface Properties of Lactobacilli

    PubMed Central

    Kankaanpää, P.; Yang, B.; Kallio, H.; Isolauri, E.; Salminen, S.

    2004-01-01

    Most probiotic lactobacilli adhere to intestinal surfaces, a phenomenon influenced by free polyunsaturated fatty acids (PUFA). The present study investigated whether free linoleic acid, γ-linolenic acid, arachidonic acid, α-linolenic acid, or docosahexaenoic acid in the growth medium alters the fatty acid composition of lactobacilli and their physical characteristics. The most abundant bacterial fatty acids identified were oleic, vaccenic, and dihydrosterculic acids. PUFA, especially conjugated linoleic acid (CLA) isomers and γ-linolenic, eicosapentaenoic, docosahexaenoic, and α-linolenic acids, also were identified in lactobacilli. When lactobacilli were cultured in MRS broth supplemented with various free PUFA, the incorporation of a given PUFA into bacterial fatty acids was clearly observed. Moreover, PUFA supplementation also resulted in PUFA-dependent changes in the proportions of other fatty acids; major interconversions were seen in octadecanoic acids (18:1), their methylenated derivatives (19:cyc), and CLA. Intermittent changes in eicosapentaenoic acid proportions also were noted. These results were paralleled by minor changes in the hydrophilic or hydrophobic characteristics of lactobacilli, suggesting that PUFA interfere with microbial adhesion to intestinal surfaces through other mechanisms. In conclusion, we have demonstrated that free PUFA in the growth medium induce changes in bacterial fatty acids in relation to the regulation of the degree of fatty acid unsaturation, cyclization, and proportions of CLA and PUFA containing 20 to 22 carbons. The potential role of lactobacilli as regulators of PUFA absorption may represent another means by which probiotics could redirect the delicate balance of inflammatory mediators derived from PUFA within the inflamed intestine. PMID:14711634

  5. Surface functionalization of two-dimensional metal chalcogenides by Lewis acid-base chemistry.

    PubMed

    Lei, Sidong; Wang, Xifan; Li, Bo; Kang, Jiahao; He, Yongmin; George, Antony; Ge, Liehui; Gong, Yongji; Dong, Pei; Jin, Zehua; Brunetto, Gustavo; Chen, Weibing; Lin, Zuan-Tao; Baines, Robert; Galvão, Douglas S; Lou, Jun; Barrera, Enrique; Banerjee, Kaustav; Vajtai, Robert; Ajayan, Pulickel

    2016-05-01

    Precise control of the electronic surface states of two-dimensional (2D) materials could improve their versatility and widen their applicability in electronics and sensing. To this end, chemical surface functionalization has been used to adjust the electronic properties of 2D materials. So far, however, chemical functionalization has relied on lattice defects and physisorption methods that inevitably modify the topological characteristics of the atomic layers. Here we make use of the lone pair electrons found in most of 2D metal chalcogenides and report a functionalization method via a Lewis acid-base reaction that does not alter the host structure. Atomic layers of n-type InSe react with Ti(4+) to form planar p-type [Ti(4+)n(InSe)] coordination complexes. Using this strategy, we fabricate planar p-n junctions on 2D InSe with improved rectification and photovoltaic properties, without requiring heterostructure growth procedures or device fabrication processes. We also show that this functionalization approach works with other Lewis acids (such as B(3+), Al(3+) and Sn(4+)) and can be applied to other 2D materials (for example MoS2, MoSe2). Finally, we show that it is possible to use Lewis acid-base chemistry as a bridge to connect molecules to 2D atomic layers and fabricate a proof-of-principle dye-sensitized photosensing device. PMID:26828848

  6. Corrosion damage of the surface of high-speed tool steel in acid-inhibitor pickling

    SciTech Connect

    Mindyuk, A.K.; Sholok, V.I.; Shvets, V.V. Gural', V.M.

    1988-01-01

    Profilograms were recorded of the surface of 20-mm-diameter 1.5-mm-thick specimens prepared from hardened and tempered R6M5 high-speed tool steel (62 HRC) and also of similar specimens subjected to the action of pure hydrochloric acid etching solution and of the same solutions with additions of KhOSP-10, KhOSP-10D, and urotropin inhibitors at 30, 60, and 90/sup 0/C for 4.0, 2.0, and 0.5 h, respectively. The analysis of corrosion damage and determination of the surface finish of the steel made it possible to develop the optimum method of acid-inhibitor pickling specifying the addition to the acid of 1.5 g/liter KhOSP-10 inhibitor and a temperature of 30/sup 0/C. This suppressed the corrosion rate, hydrogen impregnation and embrittlement, decarburization of the steel, and sensitivity to crack formation, and reduced the number of scrapped parts.

  7. Isoplanatic patch size for aberration correction in ultrasonic imaging

    NASA Astrophysics Data System (ADS)

    Pilkington, Wayne C.

    Methods and experimental results are described for determination of the region size in an aberrating medium over which a single set of aberration estimates can achieve satisfactory b-scan resolution ( i.e., the isoplanatic patch) using time-shift compensation for aberration correction of ultrasonic transmit and receive beams. Based on twenty percent allowable increases in the -12 dB width of the receive or transmit beam focus using cross-correction compared to self-correction, the isoplanatic patch sizes were found to between 3 and 5 millimeters laterally for a linearly-scanned transducer, and at least 12 millimeters axially for a target distance of 55 millimeters and aberration comparable to human abdominal wall. These sizes depend on the aberration severity, reference site axial position, and allowable resolution degradation with cross-correction. The lateral isoplanatic patch size of a linearly scanned image can be more than doubled to match that of a beam-steered acquisition using aberration estimate position matching relative to the tissue surface. Further expansion of the lateral isoplanatic patch size by an additional 50 to 100 percent for both scanning methods is also shown through propagation path matched cross-correction mapping of aberration estimates. The specific mapping required to achieve the best propagation path match depends on the axial distribution of the aberrating structures, the focal depth being imaged, and the cross-correction distance. The effectiveness of alternate methods to derive propagation path matching maps with and without a priori knowledge of aberrator spatial distribution are contrasted; and a means to dynamically adjust correction maps to maximize isoplanatic patch sizes is proposed and verified. Lateral cross-correction mapping and the map changes required for each cross-correction distance can all be implemented with simple shifting of aberration estimates within the transducer aperture. Therefore, use of optimally mapped

  8. Surface and line-edge roughness in acid-breakable resin-based positive resist

    NASA Astrophysics Data System (ADS)

    Sakamizu, Toshio; Shiraishi, Hiroshi

    2003-06-01

    A positive chemical amplification resist based on acid-catalyzed fragmentation of acetal groups in its main-chain has been developed as a means for reducing line-edge roughness. The resist consists of an acid-generator, an acid-diffusion controller and an acid-breakable (AB) resin that is synthesized through a co-condensation reaction between polyphenol and aromatic multi-functional vinylether compound. The effects of the fractionation of AB resins on resin properties and line-edge roughness (LER) are evaluated. Although AB resins have wide molecular-weight distributions, the density of acetal groups in this AB resin is found to be almost constant except in the lower molecular-weight components. The resist with a fractionated resin from which such components removed provides the high resolution of 60-nm line-and-space (L/S) patterns with fairly low LER. AFM analysis shows the surface roughness (SR) for the resist with the fractionated resin is smaller than that for a resist using non-fractionated AB resin, and that the SR value is not altered throughout the range of exposure doses up to just below the beginning of dissolution. By using the fractionated AB resin, the AB resin-based resist (ABR) is capable of forming sub-100 nm L/S patterns with less than 5 nm of LER (3σ).

  9. Fungitoxic effects of nonprotein imino acids on growth of saprophytic fungi isolated from the leaf surface of Calliandra haematocephala.

    PubMed Central

    Brenner, S A; Romeo, J T

    1986-01-01

    Four saprophytic and pathogenic fungi were isolated from the leaf surface of Calliandra haematocephala, a tropical legume known to contain large amounts of rare nonprotein imino acids in its leaves and seeds. The fungi Aspergillus niger, Aspergillus sp., Curvularia sp., and Penicillium sp. were cultured in the laboratory and tested for susceptibility to leaf extracts of the host plant and to proline, pipecolic acid, cis-5-hydroxypipecolic acid, and 2,4-trans-4,5-cis-4,5-dihydroxypipecolic acid. Fungal spore germination and germ tube growth were measured. Aspergillus sp. was inhibited by plant extracts and by pipecolic acid and cis-5-hydroxypipecolic acid. Curvularia sp. growth was stimulated by plant extracts and by pipecolic acid. The other two fungi were unaffected by any of the treatments. The data indicate that imino acids may play a role in the specific resistance of Calliandra spp. to Aspergillus sp. PMID:3707119

  10. Percutaneous penetration of felbinac after application of transdermal patches: relationship with pharmacological effects in rats.

    PubMed

    Shinkai, Norihiro; Korenaga, Kazuko; Takizawa, Hiromi; Mizu, Hideo; Yamauchi, Hitoshi

    2008-01-01

    We have evaluated the percutaneous penetration of felbinac following application of topical patches using a microdialysis technique, and have examined correlations with pharmacological effects. A linear microdialysis probe with a 20-mm dialysis fibre was inserted into the skin of anaesthetized rats. Probe perfusion was started at 2.0 microL min(-1) with physiological saline and after a 60-min baseline sampling of dialysate, 0.1 mL croton oil was applied to the skin surface at a concentration of 8%, v/v. A felbinac patch was then applied to the same point 60 min thereafter and dialysate was sampled at 60-min intervals up to 300 min after patch application, for determination of concentrations of felbinac and prostaglandin (PG) E2. Analgesic effects of felbinac patches in an iodoacetateinduced osteoarthritis model and an incisional pain model were evaluated using the weight bearing method. After application of patches, felbinac penetration into the skin was rapid, maximum concentrations in the dialysates with 0.07, 0.5 and 3.5% w/w felbinac patches being 0.046+/-0.02, 0.104+/-0.06 and 0.244+/-0.2 microg mL(-1), respectively. Dermal administration of croton oil caused an increment in PGE2 levels, which was significantly decreased by 0.5 and 3.5% felbinac patches 2-5 h after application. In pharmacological studies, 3.5% felbinac patches suppressed pain-associated behaviour induced by iodoacetate injection and plantar incision. These results suggested that the transdermal patch containing 3.5% felbinac may become a useful formulation. PMID:18088507

  11. On-Surface Domino Reactions: Glaser Coupling and Dehydrogenative Coupling of a Biscarboxylic Acid To Form Polymeric Bisacylperoxides.

    PubMed

    Held, Philipp Alexander; Gao, Hong-Ying; Liu, Lacheng; Mück-Lichtenfeld, Christian; Timmer, Alexander; Mönig, Harry; Barton, Dennis; Neugebauer, Johannes; Fuchs, Harald; Studer, Armido

    2016-08-01

    Herein we report the on-surface oxidative homocoupling of 6,6'-(1,4-buta-1,3-diynyl)bis(2-naphthoic acid) (BDNA) via bisacylperoxide formation on different Au substrates. By using this unprecedented dehydrogenative polymerization of a biscarboxylic acid, linear poly-BDNA with a chain length of over 100 nm was prepared. It is shown that the monomer BDNA can be prepared in situ at the surface via on-surface Glaser coupling of 6-ethynyl-2-naphthoic acid (ENA). Under the Glaser coupling conditions, BDNA directly undergoes polymerization to give the polymeric peroxide (poly-BDNA) representing a first example of an on-surface domino reaction. It is shown that the reaction outcome varies as a function of surface topography (Au(111) or Au(100)) and also of the surface coverage, to give branched polymers, linear polymers, or 2D metal-organic networks. PMID:27410485

  12. Plasma copolymer surfaces of acrylic acid/1,7 octadiene: surface characterisation and the attachment of ROS 17/2.8 osteoblast-like cells.

    PubMed

    Daw, R; Candan, S; Beck, A J; Devlin, A J; Brook, I M; MacNeil, S; Dawson, R A; Short, R D

    1998-10-01

    The purpose of this study was: (a) to examine the effect of plasma-gas composition on plasma polymer oxygen/carbon (O/C) ratio, functional group composition and stability in water, and then (b) to examine cell attachment to surfaces containing different concentrations of O/C and functional groups. Oxygen-functionalised surfaces were deposited by means of the plasma copolymerisation of acrylic acid/1,7-octadiene. The use of a diluent hydrocarbon allowed the deposition of surfaces with a range of O/C concentrations. Plasma copolymer surfaces were characterised by X-ray photoelectron spectroscopy (XPS). Changes in functional group composition with % acrylic acid monomer and the non-dispersive and dispersive parts of the surface energy of these plasma copolymers were measured. The solubility of the plasma copolymers was assessed by means of XPS. The degree of attachment of ROS 17/2.8 osteoblast-like cells to plasma copolymer surfaces deemed to be 'stable' in aqueous medium was measured. Tissue culture polystyrene (TCPS) was included as a control. Attachment was found to be greatest to the plasma copolymer surface with an O/C of 0.11. This surface had a carboxylic acid concentration of ca. 3%. Attachment did not correlate with increased surface wettability (i.e. the non-dispersive component of the surface energy). PMID:9856582

  13. Corynebacterium accolens Releases Antipneumococcal Free Fatty Acids from Human Nostril and Skin Surface Triacylglycerols

    PubMed Central

    Bomar, Lindsey; Brugger, Silvio D.; Yost, Brian H.; Davies, Sean S.

    2016-01-01

    ABSTRACT Bacterial interspecies interactions play clinically important roles in shaping microbial community composition. We observed that Corynebacterium spp. are overrepresented in children free of Streptococcus pneumoniae (pneumococcus), a common pediatric nasal colonizer and an important infectious agent. Corynebacterium accolens, a benign lipid-requiring species, inhibits pneumococcal growth during in vitro cocultivation on medium supplemented with human skin surface triacylglycerols (TAGs) that are likely present in the nostrils. This inhibition depends on LipS1, a TAG lipase necessary for C. accolens growth on TAGs such as triolein. We determined that C. accolens hydrolysis of triolein releases oleic acid, which inhibits pneumococcus, as do other free fatty acids (FFAs) that might be released by LipS1 from human skin surface TAGs. Our results support a model in which C. accolens hydrolyzes skin surface TAGS in vivo releasing antipneumococcal FFAs. These data indicate that C. accolens may play a beneficial role in sculpting the human microbiome. PMID:26733066

  14. Surface modification of magnetite nanoparticles using lactobionic acid and their interaction with hepatocytes.

    PubMed

    Kamruzzaman Selim, K M; Ha, Yong-Soo; Kim, Sun-Jung; Chang, Yongmin; Kim, Tae-Jeong; Ho Lee, Gang; Kang, Inn-Kyu

    2007-02-01

    In the current study, superparamagnetic magnetite nanoparticles were surface-modified with lactobionic acid (LA) to improve their intracellular uptake and ability to target hepatocytes. Maltotrionic acid (MA)-modified nanoparticles were also synthesized as a control. Cell culture experiment showed that LA-modified nanoparticles were internalized into hepatocytes and atomic absorption spectrometer (AAS) measurement indicated that the uptake amount of LA-modified magnetite into hepatocytes was higher than that of unmodified and MA-modified nanoparticles. LA-modified nanoparticle solution was injected in rabbit and the magnetic resonance (MR) images obtained showed that LA-coated nanoparticles were selectively accumulated onto the hepatocytes. This result demonstrates that the LA-modified magnetite nanoparticles have a great potential to be used as contrast agent for liver diagnosis. PMID:17049979

  15. Electrochemically Driven Surface-Confined Acid/Base Reaction for an Ultrafast H(+) Supercapacitor.

    PubMed

    Gan, Shiyu; Zhong, Lijie; Gao, Lifang; Han, Dongxue; Niu, Li

    2016-02-10

    We discovered an organic weak acid, 3,4,9,10-perylene tetracarboxylic acid (PTCA), confined on the electrode surface, revealing a reversible and ultrafast protonation/deprotonation non-Faradaic process but exhibiting analogous voltammetric peaks (capacitive peaks). A further synthesized PTCA-graphene supramolecular nanocomplex discloses a wide voltage window (1.2 V) and ultrahigh specific capacitance up to 143 F g(-1) at an ultrafast charge-discharge density of 1000 A g(-1) (at least 1 order of magnitude faster than present speeds). The capacitance retention maintained at 73% after 5000 cycles. This unique capacitive voltammetric behavior suggests a new type of charge-storage modes, which may offer a way for overcoming the present difficulties of supercapacitors. PMID:26797173

  16. Stability studies of ascorbic acid 2-glucoside in cosmetic lotion using surface response methodology.

    PubMed

    Huang, Wen-Ying; Lee, Pei-Chi; Huang, Ling-Kuei; Lu, Li-Ping; Liao, Wayne C

    2013-03-15

    Ascorbic acid 2-glucoside (AA-2G) has been widely used in cream and lotion types of cosmetic products. Thus, the degradation of AA-2G caused by the temperature change and pH variation was very critical for determining the bio-functionality of cosmetics. Response surface methodology (RSM) was introduced to study the influence of temperature and pH on the stability of AA-2G. The optimal condition of retaining AA-2G with the highest stability was determined to be 55.3°C and pH 6.4. The antioxidative activities of AA-2G including DPPH and ABTS free radical scavenging activities, metal chelating activity, and reducing ability were also determined. AA-2G was a good ascorbic acid derivative which could be used in cosmetic products as an active ingredient. PMID:23416010

  17. Reduction of microbial contamination on the surfaces of layer houses using slightly acidic electrolyzed water.

    PubMed

    Ni, L; Cao, W; Zheng, W C; Zhang, Q; Li, B M

    2015-11-01

    The objective of this study was to evaluate the effectiveness of slightly acidic electrolyzed water (SAEW) in reducing pathogens on pure cultures and on cotton fabric surfaces in the presence of organic matter and estimate its efficacy in comparison with povidone iodine solution for reducing pathogenic microorganisms on internal surfaces of layer houses. Pure cultures of E.coli, S.enteritidis, and S.aureus and cotton fabric surfaces inoculated with these strains were treated with SAEW in the presence of bovine serum albumin (BSA). In the absence of BSA, complete inactivation of all strains in pure cultures and on cotton fabric surfaces was observed after 2.5 and 5 min treatment with SAEW at 40 mg/L of available chlorine concentration (ACC), respectively. The bactericidal efficiency of SAEW increased with increasing ACC, but decreased with increasing BSA concentration. Then, the surfaces of the layer houses were sprayed with SAEW at 60, 80, and 100 mg/L of ACC and povidone iodine using the automated disinfection system at a rate of 110 mL/m(2), respectively. Samples from the floor, wall, feed trough, and egg conveyor belt surfaces were collected with sterile cotton swabs before and after spraying disinfection. Compared to tap water, SAEW and povidone iodine significantly reduced microbial populations on each surface of the layer houses. SAEW with 80 or 100 mg/L of ACC showed significantly higher efficacy than povidone iodine for total aerobic bacteria, staphylococci, coliforms, or yeasts and moulds on the floor and feed trough surfaces (P < 0.05). SAEW was more effective than povidone iodine at reducing total aerobic bacteria, coliforms, and yeasts and moulds on the wall surface. Additionally, SAEW had similar bactericidal activity with povidone iodine on the surface of the egg conveyor belt. Results suggest that SAEW exerts a higher or equivalent bactericidal efficiency for the surfaces compared to povidone iodine, and it may be used as an effective alternative

  18. Adhesive RFID Sensor Patch for Monitoring of Sweat Electrolytes.

    PubMed

    Rose, Daniel P; Ratterman, Michael E; Griffin, Daniel K; Hou, Linlin; Kelley-Loughnane, Nancy; Naik, Rajesh R; Hagen, Joshua A; Papautsky, Ian; Heikenfeld, Jason C

    2015-06-01

    Wearable digital health devices are dominantly found in rigid form factors such as bracelets and pucks. An adhesive radio-frequency identification (RFID) sensor bandage (patch) is reported, which can be made completely intimate with human skin, a distinct advantage for chronological monitoring of biomarkers in sweat. In this demonstration, a commercial RFID chip is adapted with minimum components to allow potentiometric sensing of solutes in sweat, and surface temperature, as read by an Android smartphone app with 96% accuracy at 50 mM Na(+) (in vitro tests). All circuitry is solder-reflow integrated on a standard Cu/polyimide flexible-electronic layer including an antenna, but while also allowing electroplating for simple integration of exotic metals for sensing electrodes. Optional paper microfluidics wick sweat from a sweat porous adhesive allowing flow to the sensor, or the sensor can be directly contacted to the skin. The wearability of the patch has been demonstrated for up to seven days, and includes a protective textile which provides a feel and appearance similar to a standard Band-Aid. Applications include hydration monitoring, but the basic capability is extendable to other mM ionic solutes in sweat (Cl(-), K(+), Mg(2+), NH4(+), and Zn(2+)). The design and fabrication of the patch are provided in full detail, as the basic components could be useful in the design of other wearable sensors. PMID:25398174

  19. A fundamental approach to adhesion: Synthesis, surface analysis, thermodynamics and mechanics. [acid-base properties of titanium 6-4 surfaces

    NASA Technical Reports Server (NTRS)

    Siriwardane, R.; Wightman, J. P.

    1980-01-01

    The acid-base properties of titanium 6-4 plates (low surface area) were investigated after three different pretreatments, namely Turco, phosphate-fluoride and Pasa-Jell. A series of indicators was used and color changes were detected using diffuse reflectance visible spectroscopy. Electron spectroscopy for chemical analysis was used to examine the indicator on the Ti 6-4 surface. Specular reflectance infra-red spectroscopy was used to study the adsorption of stearic acid from cyclohexane solutions on the Ti 6-4 surface.

  20. Effect of citric acid, tetracycline, and doxycycline on instrumented periodontally involved root surfaces: A SEM study

    PubMed Central

    Chahal, Gurparkash Singh; Chhina, Kamalpreet; Chhabra, Vipin; Bhatnagar, Rakhi; Chahal, Amna

    2014-01-01

    Background: A surface smear layer consisting of organic and inorganic material is formed on the root surface following mechanical instrumentation and may inhibit the formation of new connective tissue attachment to the root surface. Modification of the tooth surface by root conditioning has resulted in improved connective tissue attachment and has advanced the goal of reconstructive periodontal treatment. Aim: The aim of this study was to compare the effects of citric acid, tetracycline, and doxycycline on the instrumented periodontally involved root surfaces in vitro using a scanning electron microscope. Settings and Design: A total of 45 dentin samples obtained from 15 extracted, scaled, and root planed teeth were divided into three groups. Materials and Methods: The root conditioning agents were applied with cotton pellets using the Passive burnishing technique for 5 minutes. The samples were then examined by the scanning electron microscope. Statistical Analysis Used: The statistical analysis was carried out using Statistical Package for Social Sciences (SPSS Inc., Chicago, IL, version 15.0 for Windows). For all quantitative variables means and standard deviations were calculated and compared. For more than two groups ANOVA was applied. For multiple comparisons post hoc tests with Bonferroni correction was used. Results: Upon statistical analysis the root conditioning agents used in this study were found to be effective in removing the smear layer, uncovering and widening the dentin tubules and unmasking the dentin collagen matrix. Conclusion: Tetracycline HCl was found to be the best root conditioner among the three agents used. PMID:24744541

  1. Poly(acrylic acid) brushes pattern as a 3D functional biosensor surface for microchips

    NASA Astrophysics Data System (ADS)

    Wang, Yan-Mei; Cui, Yi; Cheng, Zhi-Qiang; Song, Lu-Sheng; Wang, Zhi-You; Han, Bao-Hang; Zhu, Jin-Song

    2013-02-01

    Poly(acrylic acid) (PAA) brushes, a novel three dimensional (3D) precursor layer of biosensor or protein microarrays, possess high protein loading level and low non-specific protein adsorption. In this article, we describe a simple and convenient way to fabricate 3D PAA brushes pattern by microcontact printing (μCP) and characterize it with FT-IR and optical microscopy. The carboxyl groups of PAA brushes can be applied to covalently immobilize protein for immunoassay. Thriving 3D space made by patterning PAA brushes thin film is available to enhance protein immobilization, which is confirmed by measuring model protein interaction between human immunoglobulin G (H-IgG) and goat anti-H-IgG (G-H-IgG) with fluorescence microscopy and surface plasmon resonance imaging (SPRi). As expected, the SPRi signals of H-IgG coating on 3D PAA brushes pattern and further measuring specific binding with G-H-IgG are all larger than that of 3D PAA brushes without pattern and 2D bare gold surface. We further revealed that this surface can be used for high-throughput screening and clinical diagnosis by label-free assaying of Hepatitis-B-Virus surface antibody (HBsAb) with Hepatitis-B-Virus surface antigen (HBsAg) concentration array chip. The linearity range for HBsAb assay is wider than that of conventional ELISA method.

  2. Surface Resistance of Jute Fibre/Polylactic Acid Biocomposite to Wet Heat

    NASA Astrophysics Data System (ADS)

    Zandvliet, Clio; Bandyopadhyay, N. R.; Ray, Dipa

    2016-04-01

    Jute fibre/polylactic acid (PLA) composite is of special interest because both resin and reinforcement come from renewable resources. Thus, it could be a more eco-friendly alternative to glass fibre composite [1] and to conventional wood-based panels made with phenol-formaldehyde resin which present many drawbacks for the workers and the environment [2]. Yet the water affinity of the natural fibres, the susceptibility of PLA towards hydrolysis and the low glass transition of the PLA raise a question about the surface resistance of such composites to wet heat in service condition for a furniture application [3]. In this work, the surface resistance of PLA/jute composite alone and with two different varnishes are investigated in regard to an interior application following the standard test method in accordance to BS EN 18721:2009: "Furniture: assessment of surface resistance to wet heat". It is compared to two common wood based panels, plywood and hardboard. After test, the composite material surface is found to be more affected than plywood and hardboard, but it becomes resistant to wet heat when a layer of biosourced varnish or petrol-based polyurethane varnish are applied on the surface.

  3. Survival and Phospholipid Fatty Acid Profiles of Surface and Subsurface Bacteria in Natural Sediment Microcosms

    PubMed Central

    Kieft, T. L.; Wilch, E.; O'Connor, K.; Ringelberg, D. B.; White, D. C.

    1997-01-01

    Although starvation survival has been characterized for many bacteria, few subsurface bacteria have been tested, and few if any have been tested in natural subsurface porous media. We hypothesized that subsurface bacteria may be uniquely adapted for long-term survival in situ. We further hypothesized that subsurface conditions (sediment type and moisture content) would influence microbial survival. We compared starvation survival capabilities of surface and subsurface strains of Pseudomonas fluorescens and a novel Arthrobacter sp. in microcosms composed of natural sediments. Bacteria were incubated for up to 64 weeks under saturated and unsaturated conditions in sterilized microcosms containing either a silty sand paleosol (buried soil) or a sandy silt nonpaleosol sediment. Direct counts, plate counts, and cell sizes were measured. Membrane phospholipid fatty acid (PLFA) profiles were quantified to determine temporal patterns of PLFA stress signatures and differences in PLFAs among strains and treatments. The Arthrobacter strains survived better than the P. fluorescens strains; however, differences in survival between surface and subsurface strains of each genus were not significant. Bacteria survived better in the paleosol than in the nonpaleosol and survived better under saturated conditions than under unsaturated conditions. Cell volumes of all strains decreased; however, sediment type and moisture did not influence rates of miniaturization. Both P. fluorescens strains showed PLFA stress signatures typical for gram-negative bacteria: increased ratios of saturated to unsaturated fatty acids, increased ratios of trans- to cis-monoenoic fatty acids, and increased ratios of cyclopropyl to monoenoic precursor fatty acids. The Arthrobacter strains showed few changes in PLFAs. Environmental conditions strongly influenced PLFA profiles. PMID:16535578

  4. Survival and phospholipid fatty acid profiles of surface and subsurface bacteria in natural sediment microcosms

    SciTech Connect

    Kieft, T.L.; Wilch, E.; O`Connor, K.

    1997-04-01

    Although starvation survival has been characterized for many bacteria, few subsurface bacteria have been tested, and few if any have been tested in natural subsurface porous media. We hypothesized that subsurface bacteria may be uniquely adapted for long-term survival in situ. We further hypothesized that subsurface conditions (sediment type and moisture content) would influence microbial survival. We compared starvation survival capabilities of surface and subsurface strains of Pseudomonas fluorescens and a novel Arthrobacter sp. in microcosms composed of natural sediments. Bacteria were incubated for up to 64 weeks under saturated and unsaturated conditions in sterilized microcosms containing either a silty sand paleosol (buried soil) or a sandy silt nonpaleosol sediment. Direct counts, plate counts, and cell sizes were measured. Membrane phospholipid fatty acid (PLFA) profiles were quantified to determine temporal patterns of PLFA stress signatures and differences in PLFAs among strains and treatments. The Arthrobacter strains survived better than the P. fluorescens strains; however, differences in survival between surface and subsurface strains of each genus were not significant. Bacteria survived better in the paleosol than in the nonpaleosol and survived better under saturated conditions than under unsaturated conditions. Cell volumes of all strains decreased; however, sediment type and moisture did not influence rates of miniaturization. Both P.fluorescens strains showed PLFA stress signatures typical for gram-negative bacteria: increased ratios of saturated to unsaturated fatty acids, increased ratios of trans- to cis-monoenoic fatty acids, and increased ratios of cyclopropyl to monoenoic precursor fatty acids. The Arthrobacter strains showed few changes in PLFAs. Environmental conditions strongly influenced PLFA profiles. 40 refs., 7 figs.

  5. Methods of Making and Using Shape Memory Polymer Composite Patches

    NASA Technical Reports Server (NTRS)

    Hood, Patrick J.

    2011-01-01

    A method of repairing a composite component having a damaged area including: laying a composite patch over the damaged area: activating the shape memory polymer resin to easily and quickly mold said patch to said damaged area; deactivating said shape memory polymer so that said composite patch retains the molded shape; and bonding said composite patch to said damaged part.

  6. Disturbance frequency influences patch dynamics in stream benthic algal communities.

    PubMed

    Ledger, Mark E; Harris, Rebecca M L; Armitage, Patrick D; Milner, Alexander M

    2008-04-01

    Disturbance is integral to the organisation of riverine ecosystems. Fluctuating low flows caused by supra-seasonal drought and water management periodically dewater habitat patches, potentially creating heterogeneity in the taxonomic composition and successional dynamics of benthic communities. The frequency of disturbance induced by low flows is contingent upon the topography of the river bed and thus varies among patches. We investigated whether the frequency of patch dewatering influenced the structure and temporal dynamics of benthic algal communities attached to the upper surfaces of stones in stream mesocosms (4 m2). In a 693-day disturbance experiment, we applied short dewatering disturbances (6 days) at high (33-day cycles) and low frequencies (99-day cycles) and compared algal assemblages with undisturbed controls at 21 endpoints. In the absence of disturbance, epilithic space was dominated by the green encrusting alga Gongrosira incrustans. However, drying disturbances consistently reduced the dominance of the green alga, and crust abundance decreased with increasing disturbance frequency, thereby opening space for a diversity of mat-forming diatoms. The response of mat diatoms to disturbance varied markedly during the experiment, from strong reductions in the abundance of loosely attached mats in mid-late 2000 to the exploitation of open space by closely adhering mats in 2001. Contrary responses were attributed to changes in the species composition of mat diatoms, which influenced the physiognomy and hence stress-resistance and resilience of the assemblage. Our results indicate that patchy dewatering of habitat patches during periods of low flow influences the successional dynamics of algae, thereby creating distinctive mosaics on the stream bed. PMID:18193289

  7. Surface morphology study of Zr-based amorphous alloys after immersion in boiling nitric acid medium

    NASA Astrophysics Data System (ADS)

    Sharma, Poonam; Dhawan, Anil; Sharma, S. K.

    2016-05-01

    Weight loss studies have been performed to determine the corrosion resistance of amorphous Zr60Nb2Al10Ni8Cu20 and Zr59Nb3Al10Ni8Cu20 alloys in aqueous HNO3 media at boiling temperature. The FESEM micrographs has been obtained to know the surface morphology of specimens after immersion in 11.5M boiling aqueous HNO3 media. Zr59Nb3Al10Ni8Cu20 alloy shows better corrosion resistance in nitric acid media than Zr60Nb2Al10Ni8Cu20 alloy.

  8. Current distribution over the electrode surface in a lead-acid cell during discharge

    NASA Astrophysics Data System (ADS)

    Král, Petr; Křivák, Petr; Bača, Petr; Calábek, Milan; Micka, Karel

    The current distribution over the plate surface in lead-acid cells in the course of discharge was determined mathematically by using the equivalent circuit method. The dependence of the internal cell resistance on the current and charge passed was determined by measurements on a laboratory cell. Six cell variants were considered differing by the location of tabs serving as current terminals. The results are presented in the form of 3D diagrams at various states of discharge. To make the current distribution nearly uniform, extended current tabs located at opposite ends of the plate electrodes were proposed.

  9. Enhanced Enzymatic Preparation of Biodiesel Using Ricinoleic Acid as Acyl Donor: Optimization Using Response Surface Methodology.

    PubMed

    Wang, Ping; Sun, Shangde

    2016-09-01

    Castor oil methyl ester is a kind of biodiesel from castor oil. However, in those previous methods for biodiesel preparation using castor oil as feedstock, glycerol was the main by-product, which had a strong blocking effect on the immobilized enzyme activity and affected the mass transfer of reaction system. For avoiding the negative effect of glycerol on the enzymatic esterification, biodiesel was prepared using ricinoleic acid (RA) as acyl donor. Enzyme screening was also studied, and the effects of reaction temperature, molar ratio of ricinoleic acid and methanol, enzyme load, and reaction time, on the preparation of castor methyl ester were also evaluated. Response surface methodology (RSM) was used to optimize the interaction effect of reaction variables (reaction temperature (30-70°C), enzyme load (2-7%; relative to the weight of total substrates), molar ratio of methanol to ricinoleic acid (2:1-10:1), and reaction time (0.5-2.5 h)) on the acid value (AV) and the degree of esterification (DE). Validation of the RSM model was verified by the good agreement between the experimental and the predicted values of AV and DE. The optimum preparation conditions were as follows: reaction temperature, 48.2°C; enzyme load, 5.8%; molar ratio of methanol to ricinoleic acid, 5.56:1; reaction time, 2.36 h. Under these conditions, the AV and DE of the esterification reaction are 10.36±1.05 mgKOH/g and 94.03±0.60%, respectively. The relationship between initial reaction rate and temperature was also established, and the activation energy (Ea) of the enzymatic esterification is 33.87 KJ/mol. PMID:27477073

  10. Label-free direct surface-enhanced Raman scattering (SERS) of nucleic acids (Conference Presentation)

    NASA Astrophysics Data System (ADS)

    Guerrini, Luca; Morla-Folch, Judit; Gisbert-Quilis, Patricia; Xie, Hainan; Alvarez-Puebla, Ramon

    2016-03-01

    Recently, plasmonic-based biosensing has experienced an unprecedented level of attention, with a particular focus on the nucleic acid detection, offering efficient solutions to engineer simple, fast, highly sensitive sensing platforms while overcoming important limitations of PCR and microarray techniques. In the broad field of plasmonics, surface-enhanced Raman scattering (SERS) spectroscopy has arisen as a powerful analytical tool for detection and structural characterization of biomolecules. Today applications of SERS to nucleic acid analysis largely rely on indirect strategies, which have been demonstrated very effective for pure sensing purposes but completely dismiss the exquisite structural information provided by the direct acquisition of the biomolecular vibrational fingerprint. Contrarily, direct label-free SERS of nucleic acid shows an outstanding potential in terms of chemical-specific information which, however, remained largely unexpressed mainly because of the inherent poor spectral reproducibility and/or limited sensitivity. To address these limitations, we developed a fast and affordable high-throughput screening direct SERS method for gaining detailed genomic information on nucleic acids (DNA and RNA) and for the characterization and quantitative recognition of DNA interactions with exogenous agents. The simple strategy relies on the electrostatic adhesion of DNA/RNA onto positively-charged silver colloids that promotes the nanoparticle aggregation into stable clusters yielding intense and reproducible SERS spectra at picogram level (i.e. the analysis can be performed without the necessity of amplification steps thus providing realistic direct information of the nucleic acid in its native state). We anticipate this method to gain a vast impact and set of applications in different fields, including medical diagnostics, genomic screening, drug discovery, forensic science and even molecular electronics.

  11. Sialic Acid-Imprinted Fluorescent Core-Shell Particles for Selective Labeling of Cell Surface Glycans.

    PubMed

    Shinde, Sudhirkumar; El-Schich, Zahra; Malakpour, Atena; Wan, Wei; Dizeyi, Nishtman; Mohammadi, Reza; Rurack, Knut; Gjörloff Wingren, Anette; Sellergren, Börje

    2015-11-01

    The expression of cell surface glycans terminating with sialic acid (SA) residues has been found to correlate with various disease states there among cancer. We here report a novel strategy for specific fluorescence labeling of such motifs. This is based on sialic acid-imprinted core-shell nanoparticles equipped with nitrobenzoxadiazole (NBD) fluorescent reporter groups allowing environmentally sensitive fluorescence detection at convenient excitation and emission wavelengths. Imprinting was achieved exploiting a hybrid approach combining reversible boronate ester formation between p-vinylphenylboronic acid and SA, the introduction of cationic amine functionalities, and the use of an NBD-appended urea-monomer as a binary hydrogen-bond donor targeting the SA carboxylic acid and OH functionalities. The monomers were grafted from 200 nm RAFT-modified silica core particles using ethylene glycol dimethacrylate (EGDMA) as cross-linker resulting in a shell thickness of ca. 10 nm. The particles displayed strong affinity for SA in methanol/water mixtures (K = 6.6 × 10(5) M(-1) in 2% water, 5.9 × 10(3) M(-1) in 98% water, B(max) ≈ 10 μmol g(-1)), whereas binding of the competitor glucuronic acid (GA) and other monosaccharides was considerably weaker (K (GA) = 1.8 × 10(3) M(-1) in 98% water). In cell imaging experiments, the particles selectively stained different cell lines in correlation with the SA expression level. This was further verified by enzymatic cleavage of SA and by staining using a FITC labeled SA selective lectin. PMID:26414878

  12. Comparison of alkaline phosphatase activity of MC3T3-E1 cells cultured on different Ti surfaces: modified sandblasted with large grit and acid-etched (MSLA), laser-treated, and laser and acid-treated Ti surfaces

    PubMed Central

    Li, Lin-Jie; Kim, So-Nam

    2016-01-01

    PURPOSE In this study, the aim of this study was to evaluate the effect of implant surface treatment on cell differentiation of osteoblast cells. For this purpose, three surfaces were compared: (1) a modified SLA (MSLA: sand-blasted with large grit, acid-etched, and immersed in 0.9% NaCl), (2) a laser treatment (LT: laser treatment) titanium surface and (3) a laser and acid-treated (LAT: laser treatment, acid-etched) titanium surface. MATERIALS AND METHODS The MSLA surfaces were considered as the control group, and LT and LAT surfaces as test groups. Alkaline phosphatase expression (ALP) was used to quantify osteoblastic differentiation of MC3T3-E1 cell. Surface roughness was evaluated by a contact profilometer (URFPAK-SV; Mitutoyo, Kawasaki, Japan) and characterized by two parameters: mean roughness (Ra) and maximum peak-to-valley height (Rt). RESULTS Scanning electron microscope revealed that MSLA (control group) surface was not as rough as LT, LAT surface (test groups). Alkaline phosphatase expression, the measure of osteoblastic differentiation, and total ALP expression by surface-adherent cells were found to be highest at 21 days for all three surfaces tested (P<.05). Furthermore, ALP expression levels of MSLA and LAT surfaces were significantly higher than expression levels of LT surface-adherent cells at 7, 14, and 21 days, respectively (P<.05). However, ALP expression levels between MSLA and LAT surface were equal at 7, 14, and 21 days (P>.05). CONCLUSION This study suggested that MSLA and LAT surfaces exhibited more favorable environment for osteoblast differentiation when compared with LT surface, the results that are important for implant surface modification studies. PMID:27350860

  13. Surface modification on polydimethylsiloxane-based microchannels with fragmented poly(l-lactic acid) nanosheets.

    PubMed

    Yang, Lu; Okamura, Yosuke; Kimura, Hiroshi

    2015-11-01

    Surface modification is a critical issue in various applications of polydimethylsiloxane (PDMS)-based microfluidic devices. Here, we describe a novel method through which PDMS-based microchannels were successfully modified with fragmented poly(l-lactic acid) (PLLA) nanosheets through a simple patchwork technique that exploited the high level of adhesiveness of PLLA nanosheets. Compared with other surface modification methods, our method required neither complicated chemical modifications nor the use of organic solvents that tend to cause PDMS swelling. The experimental results indicated that the modified PDMS exhibited excellent capacity for preventing the adhesion and activation of platelets. This simple yet efficient method can be used to fabricate the special PDMS microfluidic devices for biological, medical, and even hematological purposes. PMID:26634016

  14. Surface functionalization of styrenic block copolymer elastomeric biomaterials with hyaluronic acid via a "grafting to" strategy.

    PubMed

    Li, Xiaomeng; Luan, Shifang; Yuan, Shuaishuai; Song, Lingjie; Zhao, Jie; Ma, Jiao; Shi, Hengchong; Yang, Huawei; Jin, Jing; Yin, Jinghua

    2013-12-01

    As a biostable elastomer, the hydrophobicity of styrenic block copolymer (SBC) intensely limits its biomedical applications. In order to overcome such shortcoming, the SBC films were grafted with hyaluronic acid (HA) using a coupling agent. The surface chemistry of the modified films was examined by ATR-FTIR and XPS techniques, and the surface morphology was visually described by AFM. The biological performances of the HA-modified films were evaluated by a series of experiments, such as protein adsorption, platelet adhesion, and in vitro cytocompatibility. It was found that the HA-modified samples showed a low adhesiveness to fibroblast at the initial stage; however, it stimulated the growth of fibroblast. The L929 fibroblast growth presented a strong dependence on the molecular weight (MW) of HA. The samples modified with 17kDa HA exhibited the worst wettability and platelet adhesion, while providing the best results of supporting fibroblast proliferation. PMID:23974002

  15. Complexes of fulvic acid on the surface of hematite, goethite, and akaganeite: FTIR observation.

    PubMed

    Fu, Hongbo; Quan, Xie

    2006-04-01

    The present work extended our knowledge on the binding and complexation of a fulvic acid (FA) derived from leonardite and the iron oxides (hematite, goethite and akaganeite) by Fourier transform infrared spectroscopy (FTIR). As a prerequisite, the iron oxides were firstly prepared and characterized by transmission electron micrograph (TEM). All iron phases were single and well-described crystalloid. The FTIR data obtained by two different sampling preparation methods gave the consisting evidences that under our experimental conditions the interaction mechanism was to the ligand-exchange involving carboxylic functional groups of the FA and the surfaces sites of both hematite and goethite, while no complexation can be evidenced in the case of akaganeite, only surface adsorption. In general, the binding affinities of the iron oxides with the FA was in the order of hematite>goethite>akaganeite. The present method, although associated with some uncertainties, provided an opportunity to increase the knowledge in the field of the humic chemistry. PMID:16293289

  16. Assessment of perfluorooctanoic acid and perfluorooctane sulfonate in surface water - Tamil Nadu, India.

    PubMed

    Sunantha, Ganesan; Vasudevan, Namasivayam

    2016-08-15

    As an emerging class of environmentally persistent organic pollutants, perfluorinated compounds (PFCs), particularly perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS); have been universally found in the environment. Wastewater and untreated effluents are likely the major causes for the accumulation of PFCs in surface water. There are very few reports on the contamination of PFCs in the developing countries, particularly in India. This study reports the quantitative analysis of PFOA and PFOS in Noyyal, Cauvery, and also lakes in and around Chennai, using Ultra-Fast liquid chromatograph. The concentration of PFOA and PFOS ranged from 4 to 93ng/L and 3 to 29ng/L, respectively. The concentration of PFOS was below detectable limit in Cauvery River. A reliable concentration of PFOA was recorded at all sites of River Cauvery (5ng/L). The present study could be useful for the assessment of future monitoring programs of PFOA and PFOS in the surface water. PMID:27216042

  17. Shear bond strength of resin cement to an acid etched and a laser irradiated ceramic surface

    PubMed Central

    Motro, Pelin Fatma Karagoz; Yurdaguven, Haktan

    2013-01-01

    PURPOSE To evaluate the effects of hydrofluoric acid etching and Er,Cr:YSGG laser irradiation on the shear bond strength of resin cement to lithium disilicate ceramic. MATERIALS AND METHODS Fifty-five ceramic blocks (5 mm × 5 mm × 2 mm) were fabricated and embedded in acrylic resin. Their surfaces were finished with 1000-grit silicon carbide paper. The blocks were assigned to five groups: 1) 9.5% hydrofluoric-acid etching for 60 s; 2-4), 1.5-, 2.5-, and 6-W Er,Cr:YSGG laser applications for 60 seconds, respectively; and 5) no treatment (control). One specimen from each group was examined using scanning electron microscopy. Ceramic primer (Rely X ceramic primer) and adhesive (Adper Single Bond) were applied to the ceramic surfaces, followed by resin cement to bond the composite cylinders, and light curing. Bonded specimens were stored in distilled water at 37℃ for 24 hours. Shear bond strengths were determined by a universal testing machine at 1 mm/min crosshead speed. Data were analyzed using Kruskal-Wallis and Mann-Whitney U-tests (α=0.05). RESULTS Adhesion was significantly stronger in Group 2 (3.88 ± 1.94 MPa) and Group 3 (3.65 ± 1.87 MPa) than in Control group (1.95 ± 1.06 MPa), in which bonding values were lowest (P<.01). No significant difference was observed between Group 4 (3.59 ± 1.19 MPa) and Control group. Shear bond strength was highest in Group 1 (8.42 ± 1.86 MPa; P<.01). CONCLUSION Er,Cr:YSGG laser irradiation at 1.5 and 2.5 W increased shear bond strengths between ceramic and resin cement compared with untreated ceramic surfaces. Irradiation at 6 W may not be an efficient ceramic surface treatment technique. PMID:23755333

  18. Extended survival of several organisms and amino acids under simulated martian surface conditions

    NASA Astrophysics Data System (ADS)

    Johnson, A. P.; Pratt, L. M.; Vishnivetskaya, T.; Pfiffner, S.; Bryan, R. A.; Dadachova, E.; Whyte, L.; Radtke, K.; Chan, E.; Tronick, S.; Borgonie, G.; Mancinelli, R. L.; Rothschild, L. J.; Rogoff, D. A.; Horikawa, D. D.; Onstott, T. C.

    2011-02-01

    Recent orbital and landed missions have provided substantial evidence for ancient liquid water on the martian surface as well as evidence of more recent sedimentary deposits formed by water and/or ice. These observations raise serious questions regarding an independent origin and evolution of life on Mars. Future missions seek to identify signs of extinct martian biota in the form of biomarkers or morphological characteristics, but the inherent danger of spacecraft-borne terrestrial life makes the possibility of forward contamination a serious threat not only to the life detection experiments, but also to any extant martian ecosystem. A variety of cold and desiccation-tolerant organisms were exposed to 40 days of simulated martian surface conditions while embedded within several centimeters of regolith simulant in order to ascertain the plausibility of such organisms' survival as a function of environmental parameters and burial depth. Relevant amino acid biomarkers associated with terrestrial life were also analyzed in order to understand the feasibility of detecting chemical evidence for previous biological activity. Results indicate that stresses due to desiccation and oxidation were the primary deterrent to organism survival, and that the effects of UV-associated damage, diurnal temperature variations, and reactive atmospheric species were minimal. Organisms with resistance to desiccation and radiation environments showed increased levels of survival after the experiment compared to organisms characterized as psychrotolerant. Amino acid analysis indicated the presence of an oxidation mechanism that migrated downward through the samples during the course of the experiment and likely represents the formation of various oxidizing species at mineral surfaces as water vapor diffused through the regolith. Current sterilization protocols may specifically select for organisms best adapted to survival at the martian surface, namely species that show tolerance to radical

  19. A Novel Virus-Patch Dynamic Model.

    PubMed

    Yang, Lu-Xing; Yang, Xiaofan

    2015-01-01

    The distributed patch dissemination strategies are a promising alternative to the conventional centralized patch dissemination strategies. This paper aims to establish a theoretical framework for evaluating the effectiveness of distributed patch dissemination mechanism. Assuming that the Internet offers P2P service for every pair of nodes on the network, a dynamic model capturing both the virus propagation mechanism and the distributed patch dissemination mechanism is proposed. This model takes into account the infected removable storage media and hence captures the interaction of patches with viruses better than the original SIPS model. Surprisingly, the proposed model exhibits much simpler dynamic properties than the original SIPS model. Specifically, our model admits only two potential (viral) equilibria and undergoes a fold bifurcation. The global stabilities of the two equilibria are determined. Consequently, the dynamical properties of the proposed model are fully understood. Furthermore, it is found that reducing the probability per unit time of disconnecting a node from the Internet benefits the containment of electronic viruses. PMID:26368556

  20. A Novel Virus-Patch Dynamic Model

    PubMed Central

    Yang, Lu-Xing; Yang, Xiaofan

    2015-01-01

    The distributed patch dissemination strategies are a promising alternative to the conventional centralized patch dissemination strategies. This paper aims to establish a theoretical framework for evaluating the effectiveness of distributed patch dissemination mechanism. Assuming that the Internet offers P2P service for every pair of nodes on the network, a dynamic model capturing both the virus propagation mechanism and the distributed patch dissemination mechanism is proposed. This model takes into account the infected removable storage media and hence captures the interaction of patches with viruses better than the original SIPS model. Surprisingly, the proposed model exhibits much simpler dynamic properties than the original SIPS model. Specifically, our model admits only two potential (viral) equilibria and undergoes a fold bifurcation. The global stabilities of the two equilibria are determined. Consequently, the dynamical properties of the proposed model are fully understood. Furthermore, it is found that reducing the probability per unit time of disconnecting a node from the Internet benefits the containment of electronic viruses. PMID:26368556

  1. Patch-primitive driven compressive ghost imaging.

    PubMed

    Hu, Xuemei; Suo, Jinli; Yue, Tao; Bian, Liheng; Dai, Qionghai

    2015-05-01

    Ghost imaging has rapidly developed for about two decades and attracted wide attention from different research fields. However, the practical applications of ghost imaging are still largely limited, by its low reconstruction quality and large required measurements. Inspired by the fact that the natural image patches usually exhibit simple structures, and these structures share common primitives, we propose a patch-primitive driven reconstruction approach to raise the quality of ghost imaging. Specifically, we resort to a statistical learning strategy by representing each image patch with sparse coefficients upon an over-complete dictionary. The dictionary is composed of various primitives learned from a large number of image patches from a natural image database. By introducing a linear mapping between non-overlapping image patches and the whole image, we incorporate the above local prior into the convex optimization framework of compressive ghost imaging. Experiments demonstrate that our method could obtain better reconstruction from the same amount of measurements, and thus reduce the number of requisite measurements for achieving satisfying imaging quality. PMID:25969205

  2. Characterizing the morphology of protein binding patches.

    PubMed

    Malod-Dognin, Noël; Bansal, Achin; Cazals, Frédéric

    2012-12-01

    Let the patch of a partner in a protein complex be the collection of atoms accounting for the interaction. To improve our understanding of the structure-function relationship, we present a patch model decoupling the topological and geometric properties. While the geometry is classically encoded by the atomic positions, the topology is recorded in a graph encoding the relative position of concentric shells partitioning the interface atoms. The topological-geometric duality provides the basis of a generic dynamic programming-based algorithm comparing patches at the shell level, which may favor topological or geometric features. On the biological side, we address four questions, using 249 cocrystallized heterodimers organized in biological families. First, we dissect the morphology of binding patches and show that Nature enjoyed the topological and geometric degrees of freedom independently while retaining a finite set of qualitatively distinct topological signatures. Second, we argue that our shell-based comparison is effective to perform atomic-level comparisons and show that topological similarity is a less stringent than geometric similarity. We also use the topological versus geometric duality to exhibit topo-rigid patches, whose topology (but not geometry) remains stable upon docking. Third, we use our comparison algorithms to infer specificity-related information amidst a database of complexes. Finally, we exhibit a descriptor outperforming its contenders to predict the binding affinities of the affinity benchmark. The softwares developed with this article are availablefrom http://team.inria.fr/abs/vorpatch_compatch/. PMID:22806945

  3. Effects of Ti surface treatments with silane and arginylglycylaspartic acid peptide on bone cell progenitors.

    PubMed

    Chen, Wen-Cheng; Lo, Yang; Chen, Hong-Sen

    2015-09-01

    Achieving optimal aesthetic appearance is a major objective in dental implant design, and the interaction between the materials and the bone cell progenitors is an important factor in the attainment of this objective. In this study, a novel concept was evaluated by varying the surface modifications on titanium (Ti). Different levels of roughness can be attained by machine grinding (M), sand blasting, and acid etching (SLA) of the samples. The behavior of bone cell progenitors (D1) on the surfaces of Ti disks with different surface modifications was investigated. The surfaces of M or SLA disks were silanized (MS or SLAS group) through treatment with silane/Gly-Arg-Gly-Asp-Ser (GRGDS) peptide (MSP or SLASP group) and anchored particles of tetracalcium phosphate (TTCP) on the specimen surfaces (SLA-TTCP group). Physicochemical analysis was performed by metallographic microscopy, scanning electron microscopy, and contact angle analysis. The proliferation and the quantitative alkaline phosphatase (ALP) production of D1 cells on the surface of different sample groups were determined. The SLASP group had a significantly larger D1 cell proliferation than the other groups after 4 and 7 d of incubation (p < 0.05). ALP expression was a very early marker of differentiation, and was the first indication of the increasing number of cells at 7 d of culture. Among the groups in the M substrate series (i.e., M, MS, and MSP) and in the SLA series (i.e., SLA, SLAS, and SLASP), the MSP and SLASP specimens exhibited superior differentiation abilities on respective cultures until day 7 and day 10. A high number of hydrophilic surfaces dominated cell proliferation in the early stage of cell attachment. However, factors affecting the pore structure and the surface morphology can improve cell proliferation and differentiation. According to analyses of proliferation and ALP expression of bone cell progenitors D1, the original SLA implant surface can be improved with surface treatment

  4. Mechanistic study of electrocatalytic oxidation of formic acid at platinum in acidic solution by time-resolved surface-enhanced infrared absorption spectroscopy.

    PubMed

    Samjeské, Gabor; Miki, Atsushi; Ye, Shen; Osawa, Masatoshi

    2006-08-24

    Surface-enhanced infrared absorption spectroscopy (SEIRAS) combined with cyclic voltammetry or chronoamperometry has been utilized to examine kinetic and mechanistic aspects of the electrocatalytic oxidation of formic acid on a polycrystalline Pt surface at the molecular scale. Formate is adsorbed on the electrode in a bridge configuration in parallel to the adsorption of linear and bridge CO produced by dehydration of formic acid. A solution-exchange experiment using isotope-labeled formic acids (H(12)COOH and H(13)COOH) reveals that formic acid is oxidized to CO(2) via adsorbed formate and the decomposition (oxidation) of formate to CO(2) is the rate-determining step of the reaction. The adsorption/oxidation of CO and the oxidation/reduction of the electrode surface strongly affect the formic acid oxidation by blocking active sites for formate adsorption and also by retarding the decomposition of adsorbed formate. The interplay of the involved processes also affects the kinetics and complicates the cyclic voltammograms of formic acid oxidation. The complex voltammetric behavior is comprehensively explained at the molecular scale by taking all these effects into account. PMID:16913790

  5. Evaluation of the potentials of humic acid removal in water by gas phase surface discharge plasma.

    PubMed

    Wang, Tiecheng; Qu, Guangzhou; Ren, Jingyu; Yan, Qiuhe; Sun, Qiuhong; Liang, Dongli; Hu, Shibin

    2016-02-01

    Degradation of humic acid (HA), a predominant type of natural organic matter in ground water and surface waters, was conducted using a gas phase surface discharge plasma system. HA standard and two surface waters (Wetland, and Weihe River) were selected as the targets. The experimental results showed that about 90.9% of standard HA was smoothly removed within 40 min's discharge plasma treatment at discharge voltage 23.0 kV, and the removal process fitted the first-order kinetic model. Roles of some active species in HA removal were studied by evaluating the effects of solution pH and OH radical scavenger; and the results presented that O3 and OH radical played significant roles in HA removal. Scanning electron microscope (SEM) and FTIR analysis showed that HA surface topography and molecular structure were changed during discharge plasma process. The mineralization of HA was analyzed by UV-Vis spectrum, dissolved organic carbon (DOC), specific UV absorbance (SUVA), UV absorption ratios, and excitation-emission matrix (EEM) fluorescence. The formation of disinfection by-products during HA sample chlorination was also identified, and CHCl3 was detected as the main disinfection by-product, but discharge plasma treatment could suppress its formation to a certain extent. In addition, approximately 82.3% and 67.9% of UV254 were removed for the Weihe River water and the Wetland water after 40 min of discharge plasma treatment. PMID:26624519

  6. Theoretical Study of Trimethylacetic Acid Adsorption on CeO 2 (111) Surface

    DOE PAGESBeta

    Wang, Weina; Thevuthasan, S.; Wang, Wenliang; Yang, Ping

    2016-01-11

    We investigated trimethylacetic acid (TMAA) adsorption on stoichiometric and oxygen-deficient CeO2(111) surfaces using density functional theory that accounts for the on-site Coulomb interaction via a Hubbard term (DFT+U) and long-range dispersion correction. Both the molecular state and dissociative state (TMAA → TMA– + H+) were identified on stoichiometric and oxygen-deficient CeO2(111) surfaces. For the stoichiometric surface, two thermodynamically favorable configurations with adsorption energies of the order of -30 kcal/mol are identified; one is a molecule adsorption state, and the other one is a dissociative state. For the oxygen-deficient surface, dissociative states are more favorable than molecular states. Moreover, the mostmore » favorable configuration is the dissociative adsorption of TMAA with the adsorption energy of the order of -77 kcal/mol. The dissociated TMA moiety takes the position of oxygen vacancy, forming three Ce–O bonds. The signature vibrational frequencies for these thermodynamically stable structures are reported as well as their electronic structures. The effects of long-range dispersion interactions are found to be negligible for geometries but important for adsorption energies.« less

  7. Comparative acceptance of three transdermal nitroglycerin placebo patches.

    PubMed

    Rayment, C M; Kaul, A F; Garfield, J M

    1985-06-01

    Factors that might affect patient acceptance of transdermal drug-delivery system patches were evaluated in healthy volunteers using placebo patches. Placebo transdermal nitroglycerin patches (Transderm-Nitro 5 placebo, Ciba Pharmaceutical Company; Nitro-Dur 10 cm2 placebo, Key Pharmaceuticals; and Nitrodisc 5 placebo, Searle Laboratories) were supplied by the manufacturers. Eighty-two healthy subjects were randomly assigned to begin using one of the three brands of patches. Using a Latin-square crossover design, subjects applied each brand of patch daily for five days and crossed over to the other brands on study days 6 and 11. At the end of each study phase, subjects completed a written questionnaire designed to evaluate their overall acceptance of each brand of patch. A total of 80 subjects completed all three phases of the study. According to forced rank preference, 84% of subjects preferred the Ciba patch to one of the other two brands. Subjects judged the Ciba patch to be the easiest of the three brands to use and reported significantly fewer side effects and skin irritation while using the Ciba patch; they also preferred the size of the Ciba patch and experienced significantly fewer problems with adherence of the Ciba patch. A significant percentage of subjects indicated that they would prefer a transdermal patch over tablets or ointment. Most subjects preferred the Ciba patch over the Key patch or Searle patch. PMID:3925770

  8. Display of recombinant proteins at the surface of lactic acid bacteria: strategies and applications.

    PubMed

    Michon, C; Langella, P; Eijsink, V G H; Mathiesen, G; Chatel, J M

    2016-01-01

    Lactic acid bacteria (LAB) are promising vectors of choice to deliver active molecules to mucosal tissues. They are recognized as safe by the World Health Organization and some strains have probiotic properties. The wide range of potential applications of LAB-driven mucosal delivery includes control of inflammatory bowel disease, vaccine delivery, and management of auto-immune diseases. Because of this potential, strategies for the display of proteins at the surface of LAB are gaining interest. To display a protein at the surface of LAB, a signal peptide and an anchor domain are necessary. The recombinant protein can be attached to the membrane layer, using a transmembrane anchor or a lipoprotein-anchor, or to the cell wall, by a covalent link using sortase mediated anchoring via the LPXTG motif, or by non-covalent liaisons employing binding domains such as LysM or WxL. Both the stability and functionality of the displayed proteins will be affected by the kind of anchor used. The most commonly surfaced exposed recombinant proteins produced in LAB are antigens and antibodies and the most commonly used LAB are lactococci and lactobacilli. Although it is not necessarily so that surface-display is the preferred localization in all cases, it has been shown that for certain applications, such as delivery of the human papillomavirus E7 antigen, surface-display elicits better biological responses, compared to cytosolic expression or secretion. Recent developments include the display of peptides and proteins targeting host cell receptors, for the purpose of enhancing the interactions between LAB and host. Surface-display technologies have other potential applications, such as degradation of biomass, which is of importance for some potential industrial applications of LAB. PMID:27142045

  9. Sequential Washing with Electrolyzed Alkaline and Acidic Water Effectively Removes Pathogens from Metal Surfaces

    PubMed Central

    Nakano, Yuichiro; Akamatsu, Norihiko; Mori, Tsuyoshi; Sano, Kazunori; Satoh, Katsuya; Nagayasu, Takeshi; Miyoshi, Yoshiaki; Sugio, Tomomi; Sakai, Hideyuki; Sakae, Eiji; Ichimiya, Kazuko; Hamada, Masahisa; Nakayama, Takehisa; Fujita, Yuhzo; Yanagihara, Katsunori; Nishida, Noriyuki

    2016-01-01

    Removal of pathogenic organisms from reprocessed surgical instruments is essential to prevent iatrogenic infections. Some bacteria can make persistent biofilms on medical devices. Contamination of non-disposable equipment with prions also represents a serious risk to surgical patients. Efficient disinfection of prions from endoscopes and other instruments such as high-resolution cameras remains problematic because these instruments do not tolerate aggressive chemical or heat treatments. Herein, we develop a new washing system that uses both the alkaline and acidic water produced by electrolysis. Electrolyzed acidic water, containing HCl and HOCl as active substances, has been reported to be an effective disinfectant. A 0.15% NaCl solution was electrolyzed and used immediately to wash bio-contaminated stainless steel model systems with alkaline water (pH 11.9) with sonication, and then with acidic water (pH 2.7) without sonication. Two bacterial species (Staphylococcus aureus and Pseudomonas aeruginosa) and a fungus (Candida albicans) were effectively removed or inactivated by the washing process. In addition, this process effectively removed or inactivated prions from the stainless steel surfaces. This washing system will be potentially useful for the disinfection of clinical devices such as neuroendoscopes because electrolyzed water is gentle to both patients and equipment and is environmentally sound. PMID:27223116

  10. Maximizing the electromagnetic and chemical resonances of surface-enhanced Raman scattering for nucleic acids.

    PubMed

    Freeman, Lindsay M; Pang, Lin; Fainman, Yeshaiahu

    2014-08-26

    Although surface-enhanced Raman spectroscopy (SERS) has previously been performed with nucleic acids, the measured intensities for each nucleic acid have varied significantly depending on the SERS substrate and excitation wavelength. We have demonstrated that the charge-transfer (CT) mechanism, also known as the chemical enhancement of SERS, is responsible for the discrepancies previously reported in literature. The electronic states of cytosine and guanine attached to silver atoms are computationally calculated and experimentally measured to be in the visible range, which leads to a resonance Raman effect at the corresponding maximum wavelengths. The resulting SERS measurements are in good agreement with the simulated values, in which cytosine-silver shows stronger enhancement at 532 nm and guanine-silver shows stronger enhancement at 785 nm. An atomic layer of aluminum oxide is deposited on substrates to prevent charge-transfer, and corresponding measurements show weaker Raman signals caused by the suppression of the chemical resonance. These findings suggest the optimal SERS signal can be achieved by tuning the excitation wavelength to match both the electromagnetic and chemical resonances, paving the way for future single molecule detection of nucleic acids other than adenine. PMID:25065837

  11. Torque Analysis of a Triple Acid-Etched Titanium Implant Surface

    PubMed Central

    Pontes, Ana Emília Farias; de Toledo, Cássio Torres; Garcia, Valdir Gouveia; Ribeiro, Fernando Salimon; Sakakura, Celso Eduardo

    2015-01-01

    The present study aimed to evaluate the removal torque of titanium implants treated with triple acid etching. Twenty-one rats were used in this study. For all animals, the tibia was prepared with a 2 mm drill, and a titanium implant (2 × 4 mm) was inserted after treatment using the subtraction method of triple acid etching. The flaps were sutured. Seven animals were killed 14, 28, and 63 days after implant installation, and the load necessary for removing the implant from the bone was evaluated by using a torque meter. The torque values were as follows: 3.3 ± 1.7 Ncm (14 days), 2.2 ± 1.3 Ncm (28 days), and 6.7 ± 1.4 Ncm (63 days). The torque value at the final healing period (63 days) was statistically significantly different from that at other time points tested (ANOVA, p = 0.0002). This preliminary study revealed that treatment with triple acid etching can create a promising and efficient surface for the process of osseointegration. PMID:26543898

  12. Sequential Washing with Electrolyzed Alkaline and Acidic Water Effectively Removes Pathogens from Metal Surfaces.

    PubMed

    Nakano, Yuichiro; Akamatsu, Norihiko; Mori, Tsuyoshi; Sano, Kazunori; Satoh, Katsuya; Nagayasu, Takeshi; Miyoshi, Yoshiaki; Sugio, Tomomi; Sakai, Hideyuki; Sakae, Eiji; Ichimiya, Kazuko; Hamada, Masahisa; Nakayama, Takehisa; Fujita, Yuhzo; Yanagihara, Katsunori; Nishida, Noriyuki

    2016-01-01

    Removal of pathogenic organisms from reprocessed surgical instruments is essential to prevent iatrogenic infections. Some bacteria can make persistent biofilms on medical devices. Contamination of non-disposable equipment with prions also represents a serious risk to surgical patients. Efficient disinfection of prions from endoscopes and other instruments such as high-resolution cameras remains problematic because these instruments do not tolerate aggressive chemical or heat treatments. Herein, we develop a new washing system that uses both the alkaline and acidic water produced by electrolysis. Electrolyzed acidic water, containing HCl and HOCl as active substances, has been reported to be an effective disinfectant. A 0.15% NaCl solution was electrolyzed and used immediately to wash bio-contaminated stainless steel model systems with alkaline water (pH 11.9) with sonication, and then with acidic water (pH 2.7) without sonication. Two bacterial species (Staphylococcus aureus and Pseudomonas aeruginosa) and a fungus (Candida albicans) were effectively removed or inactivated by the washing process. In addition, this process effectively removed or inactivated prions from the stainless steel surfaces. This washing system will be potentially useful for the disinfection of clinical devices such as neuroendoscopes because electrolyzed water is gentle to both patients and equipment and is environmentally sound. PMID:27223116

  13. Amino acid diagenesis, organic carbon and nitrogen mineralization in surface sediments from the inner Oslofjord, Norway

    SciTech Connect

    Haugen, J.E. ); Lichtentaler, R. )

    1991-06-01

    Total hydrolyzed amino acids (THAA), total organic carbon (TOC), and total nitrogen (TN) have been measured in an oxic and anoxic surface sediment from the inner Oslofjord. Downcore variations of these parameters are ascribed to both diagenesis and changes in organic matter supply, the latter being most important. These changes are most prominent in the anoxic sediment, which reflects the eutrophication history of the innermost part of the fjord. Downcore, THAA content decreased from 3.8 to 2.0 mg/g (salt-free dry weight) in the oxic sediment and from 22.3 to 3.8 mg/g in the anoxic sediment. Total amino acid nitrogen varied between 17 and 34% of total nitrogen in the oxic, and 25 and 54% in the anoxic, sediment. Organic carbon and organic nitrogen accumulation rates and depth integrated mineralization rates are about three times higher in the anoxic sediment than in the oxic sediment. Recycling of amino acids accounted for 4 to 12% of the total organic carbon and 13 to 40% of the total organic nitrogen regenerated in these sediments.

  14. Spatial distribution of perfluoroalkyl acids in surface sediments of the German Bight, North Sea.

    PubMed

    Zhao, Zhen; Xie, Zhiyong; Tang, Jianhui; Zhang, Gan; Ebinghaus, Ralf

    2015-04-01

    Perfluoroalkyl acids (PFAAs) have been determined in the environment globally. However, studies on the occurrence of PFAAs in marine sediment remain limited. In this study, 16 PFAAs are investigated in surface sediments from the German Bight, which provided a good overview of the spatial distribution. The concentrations of ΣPFAAs ranged from 0.056 to 7.4 ng/g dry weight. The highest concentration was found at the estuary of the River Ems, which might be the result of local discharge source. Perfluorooctane sulfonic acid (PFOS) was the dominant compound, and the enrichment of PFOS in sediment might be strongly related to the compound structure itself. The geographical condition of the German Bight influenced the movement of water and sediment, resulting in complex distribution. Following normalization according to total organic carbon (TOC) content, PFAA distributions showed a different picture. Significant linear relationships were found between total PFAA concentrations and TOC (R2=0.50, p<0.01). Compared with a previous study conducted in the same area, a declining trend was presented for the concentrations of PFOS and perfluorooctanoic acid (PFOA). Compound structure, geographical condition, and organic carbon in the sediment influence the distribution of PFAAs in the German Bight. Environmental risk assessment indicated that the risk from PFOA is negligible, whereas PFOS in marine sediment may present a risk for benthic organisms in the German Bight. PMID:25544333

  15. Electrocatalysis of formic acid on palladium and platinum surfaces: from fundamental mechanisms to fuel cell applications.

    PubMed

    Jiang, Kun; Zhang, Han-Xuan; Zou, Shouzhong; Cai, Wen-Bin

    2014-10-14

    Formic acid as a natural biomass and a CO2 reduction product has attracted considerable interest in renewable energy exploitation, serving as both a promising candidate for chemical hydrogen storage material and a direct fuel for low temperature liquid fed fuel cells. In addition to its chemical dehydrogenation, formic acid oxidation (FAO) is a model reaction in the study of electrocatalysis of C1 molecules and the anode reaction in direct formic acid fuel cells (DFAFCs). Thanks to a deeper mechanistic understanding of FAO on Pt and Pd surfaces brought about by recent advances in the fundamental investigations, the "synthesis-by-design" concept has become a mainstream idea to attain high-performance Pt- and Pd-based nanocatalysts. As a result, a large number of efficient nanocatalysts have been obtained through different synthesis strategies by tailoring geometric and electronic structures of the two primary catalytic metals. In this paper, we provide a brief overview of recent progress in the mechanistic studies of FAO, the synthesis of novel Pd- and Pt-based nanocatalysts as well as their practical applications in DFAFCs with a focus on discussing studies significantly contributing to these areas in the past five years. PMID:25144896

  16. Optimization of clavulanic acid production by Streptomyces daufpe 3060 by response surface methodology.

    PubMed

    Marques, Daniela A Viana; Cunha, Márcia N Carneiro; Araújo, Janete M; Lima-Filho, José L; Converti, Attilio; Pessoa-Jr, Adalberto; Porto, Ana L Figueiredo

    2011-04-01

    Clavulanic acid is a ß-lactam antibiotic which has a potent ß-lactamase inhibiting activity. In order to optimize its production by the new isolate Streptomyces DAUFPE 3060, the influence of two independent variables, temperature and soybean flour concentration, on clavulanic acid and biomass concentrations was investigated in 250 mL-Erlenmeyers according to a 2(2) central composite design. To this purpose, temperature and soybean flour (SF) concentration were varied in the ranges 26-34°C and 10-50 g/L, respectively, and the results evaluated utilizing the Response Surface Methodology. The experimental maximum production of clavulanic acid (629 mg/L) was obtained at 32°C and 40 g/L SF after 48 h, while the maximum biomass concentration (3.9 g/L) at 30°C and 50 g/L soybean flour, respectively. These values are satisfactorily close to those (640 mg/L and 3.75 g/L, respectively) predicted by the model, thereby demonstrating the validity of the mathematical approach adopted in this study. PMID:24031677

  17. Optimization of clavulanic acid production by Streptomyces daufpe 3060 by response surface methodology

    PubMed Central

    Marques, Daniela A. Viana; Cunha, Márcia N. Carneiro; Araújo, Janete M.; Lima-Filho, José L.; Converti, Attilio; Pessoa-Jr, Adalberto; Porto, Ana L. Figueiredo

    2011-01-01

    Clavulanic acid is a ß-lactam antibiotic which has a potent ß-lactamase inhibiting activity. In order to optimize its production by the new isolate Streptomyces DAUFPE 3060, the influence of two independent variables, temperature and soybean flour concentration, on clavulanic acid and biomass concentrations was investigated in 250 mL-Erlenmeyers according to a 22 central composite design. To this purpose, temperature and soybean flour (SF) concentration were varied in the ranges 26–34°C and 10–50 g/L, respectively, and the results evaluated utilizing the Response Surface Methodology. The experimental maximum production of clavulanic acid (629 mg/L) was obtained at 32°C and 40 g/L SF after 48 h, while the maximum biomass concentration (3.9 g/L) at 30°C and 50 g/L soybean flour, respectively. These values are satisfactorily close to those (640 mg/L and 3.75 g/L, respectively) predicted by the model, thereby demonstrating the validity of the mathematical approach adopted in this study. PMID:24031677

  18. Colloid Transport and Surface-Subsurface Exchange in an Acid Mine Drainage-Impacted Stream

    NASA Astrophysics Data System (ADS)

    Norvell, A. S.; Ryan, J. N.; Ren, J.; McKnight, D. M.

    2010-12-01

    Colloidal particles may provide an important control on the mobility of contaminants of concern; e.g., metals introduced into a stream from an acid mine drainage. In order to examine colloidal transport and surface-subsurface exchange, we injected synthesized ferrihydrite colloids along with a conservative tracer, bromide, into Lefthand Creek, a stream contaminated by acid mine drainage in northwestern Boulder County, Colorado. The ferrihydrite colloids were co-precipitated with yttrium to form yttrium-labelled colloids so that we could differentiate them from environmental colloids. Yttrium was measured in samples collected from the surface water and the hyporheic zone. The hyporheic zone samples were collected from a series of mini-piezometers embedded up to 1 m in depth and over a 61 m reach of the stream. A one-dimensional transient storage model (OTIS-P) was used to quantify parameters describing the transport of the conservative tracer and the colloids. Approximately 20% of the colloidal mass was lost over the 61 m reach. The loss of colloids is attributed to deposition in the shallow hyporheic zone. Laboratory column experiments demonstrated that the stream bed sediments effectively remove colloids from suspension at the pH, ionic strength, and dissolved organic matter concentration conditions occurring in Lefthand Creek.

  19. Effect of Naturally Acidic Agents on Microhardness and Surface Micromorphology of Restorative Materials

    PubMed Central

    Hengtrakool, Chanothai; Kukiattrakoon, Boonlert; Kedjarune-Leggat, Ureporn

    2011-01-01

    Objectives: This study investigated the titratable acidity and erosive potential of acidic agents on the microhardness and surface micromorphology of four restorative materials. Methods: Forty-seven discs of each restorative material; metal-reinforced glass ionomer cement (Ketac-S), resin-modified glass ionomer cement (Fuji II LC), resin composite (Filtek Z250) and amalgam (Valiant-Ph.D.), 12 mm in diameter and 2.5 mm in thickness, were divided into four groups (5 discs/group). Specimens were then immersed for 7 days into four storage media; deionized water (control), citrate buffer solution, green mango juice and pineapple juice. Microhardness testing before and after immersions was performed. Micromorphological changes were evaluated under a scanning electron microscope (SEM). Statistical significance among each group was analyzed using two-way repeated ANOVA and Tukey’s tests. Results: The Fuji II LC and the Ketac-S showed the highest reduction in microhardness (P<.05). The Valiant-Ph.D. and the Filtek Z250 showed some minor changes over the period of 7 days. The mango juice produced the greatest degradation effect (P<.05). Conclusions: This study suggested that for restorations in patients who have tooth surface loss, materials selected should be considered. In terms of materials evaluated, amalgam and resin composite are the most suitable for restorations. PMID:21311608

  20. Interfacial thermodynamics of gallic acid adsorption on a chargeable hydrophobic surface.

    PubMed

    Giannakopoulos, Evangelos; Deligiannakis, Yiannis

    2011-06-15

    The thermodynamics of adsorption of gallic acid (GA, 3,4,5-trihydroxylbenzoic acid) on the hanging mercury drop electrode (HMDE) surface was studied by temperature-dependent stripping voltammetry (TD-SV), at physiological pH 7.4. The thermodynamic parameters, e.g., Gibbs free energy, ΔG(ADS), enthalpy, ΔΗ(ADS) and entropy, ΔS(ADS), of adsorption have been determined at physiological temperatures 2-40 °C. Chemisorption of the radical species ≡[GA(OH)(2)(O(-))]* is the energetically important reaction. The thermodynamic data show a complex mechanism of adsorption of GA on the electrode surface, which is strongly dependent on temperature. At low-temperatures T<12 °C, adsorption is controlled by enthalpy, while at T>22 °C, adsorption is entropy driven. In the temperature range 12 °C and 22 °C, a combined enthalpy-entropy stabilization occurs. A mechanism is proposed which analyses the implication of thermodynamics to the interfacial adsorption of polyphenols with cell membranes under physiological conditions. PMID:21481893

  1. Dimensionality reduction via locally reconstructive patch alignment

    NASA Astrophysics Data System (ADS)

    Chen, Yi; Yin, Jun; Zhu, Jie; Jin, Zhong

    2012-07-01

    Based on the local patch concept, we proposed locally reconstructive patch alignment (LRPA) for dimensionality reduction. For each patch, LRPA aims to find the low-dimensional subspace in which the reconstruction error of the within-class nearest neighbors is minimized and the reconstruction error of the between-class nearest neighbors is maximized. LRPA preserves the local structure hidden in the high-dimensional space. More importantly, LRPA has natural connections with linear regression classification (LRC). While LRC uses reconstruction errors as the classification rule, a sample can be classified correctly when the within-class reconstruction error is minimal. The goal of LRPA makes it cooperate well with LRC. The experimental results on the extended Yale B (YALE-B), AR, PolyU finger knuckle print, and the palm print databases demonstrate LRPA plus LRC is an effective and robust pattern-recognition system.

  2. Easier patch testing with TRUE Test.

    PubMed

    Fischer, T; Maibach, H I

    1989-03-01

    TRUE Test, a standardized, ready-to-apply patch test system, is made from polyester covered with a film of allergens incorporated in a hydrophilic polymer. The patches are mounted on nonwoven cellulose tape with acrylic adhesive, covered with siliconized plastic, and packed in an air-tight and light-impermeable envelope. When the test strip is taped on the skin, perspiration hydrates the film and transforms it to a gel, which causes the allergen to be released. The first panel of 12 allergens and allergen mixes is standardized and tested for stability in vitro and in vivo. The accuracy of the test panel has been certified in international multicenter studies by comparing it with present patch test techniques. A second panel of 11 more allergens was completed in 1988. The two test panels include the full standard panel of the North American Contact Dermatitis Group. PMID:2918115

  3. Patch-Clamp Fluorometry: Electrophysiology meets Fluorescence

    PubMed Central

    Kusch, Jana; Zifarelli, Giovanni

    2014-01-01

    Ion channels and transporters are membrane proteins whose functions are driven by conformational changes. Classical biophysical techniques provide insight into either the structure or the function of these proteins, but a full understanding of their behavior requires a correlation of both these aspects in time. Patch-clamp and voltage-clamp fluorometry combine spectroscopic and electrophysiological techniques to simultaneously detect conformational changes and ionic currents across the membrane. Since its introduction, patch-clamp fluorometry has been responsible for invaluable advances in our knowledge of ion channel biophysics. Over the years, the technique has been applied to many different ion channel families to address several biophysical questions with a variety of spectroscopic approaches and electrophysiological configurations. This review illustrates the strength and the flexibility of patch-clamp fluorometry, demonstrating its potential as a tool for future research. PMID:24655500

  4. On the Search for the Amino Acids on the Lunar Surface as it Relates to Other Extraterrestrial Bodies

    NASA Technical Reports Server (NTRS)

    Hoover, Richard B.; Kolb, Vera M.

    2009-01-01

    The early search for the amino acids on the lunar surface fines indicated such a low amount of the amino acids that it was deemed insignifi cant. While the later studies seemed to depart in some ways from the earlier results, they were not pursued. In this paper we critically ev aluate the results from the Apollo missions from the new perspective with considerations of the sensitivity of the instrumentation availabl e at the time. We discuss the possible relevance of the lunar results to the findings of the amino acids on the surfaces of other extraterrestrial bodies, such as Mars.

  5. Boolean Operations with Prism Algebraic Patches.

    PubMed

    Bajaj, Chandrajit; Paoluzzi, Alberto; Portuesi, Simone; Lei, Na; Zhao, Wenqi

    2008-01-01

    In this paper we discuss a symbolic-numeric algorithm for Boolean operations, closed in the algebra of curved polyhedra whose boundary is triangulated with algebraic patches (A-patches). This approach uses a linear polyhedron as a first approximation of both the arguments and the result. On each triangle of a boundary representation of such linear approximation, a piecewise cubic algebraic interpolant is built, using a C(1)-continuous prism algebraic patch (prism A-patch) that interpolates the three triangle vertices, with given normal vectors. The boundary representation only stores the vertices of the initial triangulation and their external vertex normals. In order to represent also flat and/or sharp local features, the corresponding normal-per-face and/or normal-per-edge may be also given, respectively. The topology is described by storing, for each curved triangle, the two triples of pointers to incident vertices and to adjacent triangles. For each triangle, a scaffolding prism is built, produced by its extreme vertices and normals, which provides a containment volume for the curved interpolating A-patch. When looking for the result of a regularized Boolean operation, the 0-set of a tri-variate polynomial within each such prism is generated, and intersected with the analogous 0-sets of the other curved polyhedron, when two prisms have non-empty intersection. The intersection curves of the boundaries are traced and used to decompose each boundary into the 3 standard classes of subpatches, denoted in, out and on. While tracing the intersection curves, the locally refined triangulation of intersecting patches is produced, and added to the boundary representation. PMID:21516262

  6. Tannic Acid Inhibits Staphylococcus aureus Surface Colonization in an IsaA-Dependent Manner

    PubMed Central

    Payne, David E.; Martin, Nicholas R.; Parzych, Katherine R.; Rickard, Alex H.; Underwood, Adam

    2013-01-01

    Staphylococcus aureus is a human commensal and pathogen that is capable of forming biofilms on a variety of host tissues and implanted medical devices. Biofilm-associated infections resist antimicrobial chemotherapy and attack from the host immune system, making these infections particularly difficult to treat. In order to gain insight into environmental conditions that influence S. aureus biofilm development, we screened a library of small molecules for the ability to inhibit S. aureus biofilm formation. This led to the finding that the polyphenolic compound tannic acid inhibits S. aureus biofilm formation in multiple biofilm models without inhibiting bacterial growth. We present evidence that tannic acid inhibits S. aureus biofilm formation via a mechanism dependent upon the putative transglycosylase IsaA. Tannic acid did not inhibit biofilm formation of an isaA mutant. Overexpression of wild-type IsaA inhibited biofilm formation, whereas overexpression of a catalytically dead IsaA had no effect. Tannin-containing drinks like tea have been found to reduce methicillin-resistant S. aureus nasal colonization. We found that black tea inhibited S. aureus biofilm development and that an isaA mutant resisted this inhibition. Antibiofilm activity was eliminated from tea when milk was added to precipitate the tannic acid. Finally, we developed a rodent model for S. aureus throat colonization and found that tea consumption reduced S. aureus throat colonization via an isaA-dependent mechanism. These findings provide insight into a molecular mechanism by which commonly consumed polyphenolic compounds, such as tannins, influence S. aureus surface colonization. PMID:23208606

  7. Fish population losses from Adirondack lakes: The role of surface water acidity and acidification

    SciTech Connect

    Baker, J.P. ); Warren-Hicks, W.J. ); Gallagher, J. ); Christensen, S.W. )

    1993-04-01

    Within the United States, the Adirondack region of New York State has the largest percentage of waters that are acidic and classified as deposition dominated. Thus, the Adirondacks have been the focus of much of the debate regarding the extent and magnitude of effects to date from acidic deposition. Completion of the Adirondack Lakes Survey in 1987, a survey of 1,469 lakes, in combination with the relatively extensive historical record on fish communities in the region, provided the opportunity for a thorough evaluation of changes in Adirondack fish communities over the last 50-60 years, and the degree to which these changes may have resulted from changes in surface water acid-base chemistry. Results indicate that 16-19% of the lakes with adequate historical data appeared to have lost one or more fish populations as a result of acidification. Brook trout and acid-sensitive minnows had experienced the most widespread effects, with losses in 11-19% of the lakes. Fish species occurring in lower elevation and larger lakes such as bass and brown trout, experienced little or no effects. Lakes judged to have lost fish populations to acidification had significantly lower pH and higher concentrations of inorganic aluminum and occurred at higher elevations than other lakes. No other lake characteristics showed consistent associations with fish population losses. Acidification is not the only factor, nor even the dominant factor affecting Adirondack fish communities, however. Other causes of fish loses include lake reclamation, changes in stocking policy, and the introduction (or invasion) of competitors or predators.

  8. Patch testing with cement containing iron sulfate.

    PubMed

    Bruze, M; Fregert, S; Gruvberger, B

    1990-01-01

    Addition of iron sulfate to cement means transformation of water-soluble hexavalent chromium into nonwater-soluble trivalent chromium. This has been the basis for preventive measures concerning sensitization to hexavalent chromium (chromate) in cement. For some years, iron sulfate has been added to cement manufactured in the Scandinavian countries. In the present in vivo study, cements with and without iron sulfate were compared concerning their capacity to elicit allergic patch-test reactions in eight chromate-hypersensitive individuals. No patch-test reactions were obtained from a water extract of cement with iron sulfate when appropriately buffered. PMID:2137395

  9. Lightweight Material Patches Allow for Quick Repairs

    NASA Technical Reports Server (NTRS)

    2010-01-01

    Cornerstone Research Group Inc., of Dayton, Ohio, has been the recipient of 16 Small Business Innovation Research (SBIR) contracts with NASA with a variety of different focuses, including projects like creating inflatable structures for radio frequency antennas and, most recently, healable polymer matrix composites for future space vehicles. One of its earlier SBIR contracts, with Kennedy Space Center, led to the development of a new type of structural patch for a variety of consumer uses: Rubbn Repair, for automotive uses; and Rec Repair for the outdoors and adventure market. Both are flexible, heat-activated structural patches.

  10. Raman and surface-enhanced Raman spectroscopy of amino acids and nucleotide bases for target bacterial vibrational mode identification

    NASA Astrophysics Data System (ADS)

    Guicheteau, Jason; Argue, Leanne; Hyre, Aaron; Jacobson, Michele; Christesen, Steven D.

    2006-05-01

    Raman and surface-enhanced Raman spectroscopy (SERS) studies of bacteria have reported a wide range of vibrational mode assignments associated with biological material. We present Raman and SER spectra of the amino acids phenylalanine, tyrosine, tryptophan, glutamine, cysteine, alanine, proline, methionine, asparagine, threonine, valine, glycine, serine, leucine, isoleucine, aspartic acid and glutamic acid and the nucleic acid bases adenosine, guanosine, thymidine, and uridine to better characterize biological vibrational mode assignments for bacterial target identification. We also report spectra of the bacteria Bacillus globigii, Pantoea agglomerans, and Yersinia rhodei along with band assignments determined from the reference spectra obtained.

  11. Interaction of anthranilic acid with silver nanoparticles: A Raman, surface-enhanced Raman scattering and density functional theoretical study

    NASA Astrophysics Data System (ADS)

    Chadha, Ridhima; Maiti, Nandita; Kapoor, Sudhir

    2014-11-01

    Raman and surface-enhanced Raman scattering (SERS) studies of anthranilic acid have been investigated in solid, aqueous solution and on silver colloid. Anthranilic acid plays a key role in the brain in the production of quinolinic acid which is a powerful excitant and convulsant substance. Due to its medicinal importance, the surface adsorption properties of anthranilic acid have been studied. The experimental Raman and SERS data is supported with DFT calculations using B3LYP functional with aug-cc-pvdz and LANL2DZ basis sets. The comparison of experimental and theoretical results infers that anthranilate is chemisorbed to the silver surface directly through the carboxylate group with a perpendicular orientation. The time-dependent SERS spectrum of anthranilate showed no observable change indicating no structural transformation with time. The SERS spectrum recorded at different excitation wavelengths helped in understanding the origin of the SERS mechanism.

  12. Analysis of the low-pressure plasma pretreated polymer surface in terms of acid-base approach

    NASA Astrophysics Data System (ADS)

    Kraus, Eduard; Orf, Lukas; Baudrit, Benjamin; Heidemeyer, Peter; Bastian, Martin; Bonenberger, Ramona; Starostina, Irina; Stoyanov, Oleg

    2016-05-01

    We demonstrate the use of a modern wetting method for determining the acid-base properties of treated polymer surfaces for different plastics and adhesives. The effect of the surface treatment with low pressure plasma was evaluated from the viewpoint of acid-base approach with plastics polyoxymethylene (POM) and polyetheretherketone (PEEK). The correlations between the acid-base properties and the identified mechanical tensile strengths of adhesive bonded joints were evaluated and discussed. In the investigated range the determination coefficients for POM and PEEK were calculated to R2 = 0.93 and R2 = 0.97, respectively. These relatively high determination coefficients showed a good correlation between the mechanical strength and the acidity parameter ΔDshort for use in bonding technology for surface pretreatment of polymers with LPP.

  13. Infrared spectroscopic study of the amidation reaction of aminophenyl modified Au surfaces and p-nitrobenzoic acid as model system.

    PubMed

    Zhang, Xin; Sun, Guoguang; Hinrichs, Karsten; Janietz, Silvia; Rappich, Joerg

    2010-10-21

    We have investigated the fundamental amidation reaction by a model system consisting of an electrochemically functionalised Au surface by aminophenyl and 4-nitrobenzoic acid activated by EEDQ. The development of the NO(2) related stretching vibrations with time reveals that the amidation process is very slow at Au surfaces and is completed after about 2 days. PMID:20737098

  14. Acid Etching and Surface Coating of Glass-Fiber Posts: Bond Strength and Interface Analysis.

    PubMed

    Cecchin, Doglas; Farina, Ana Paula; Vitti, Rafael Pino; Moraes, Rafael Ratto; Bacchi, Ataís; Spazzin, Aloísio Oro

    2016-01-01

    The aim of this study was to evaluate the bond strength of a composite resin to glass-fiber post (GFP) treated or not with phosphoric acid, silane coupling agent, and unfilled resin. GFPs were etched or not with 37% phosphoric acid and different surface coating applied: silane coupling agent, unfilled resin, or both. Composite resin blocks were built around a 4-mm height on the GFP. Unfilled resin (20 s) and composite resin (40 s) were light activated by a light-emitting diode unit. The specimens were stored in distilled water at 37 °C for 24 h. Microtensile bond test was performed using a mechanical testing machine until failure (n=10). The data were analyzed using two-way ANOVA followed by Student-Newman-Keuls' test (p<0.05). Failure modes were classified as adhesive, mixed, or cohesive failures. Additional specimens (n=3) were made to analyze the bonded interfaces by scanning electron microscopy. The statistical analysis showed the factor 'surface coating' was significant (p<0.05), whereas the factor 'HP etching' (p=0.131) and interaction between the factors (p=0.171) were not significant. The highest bond strength was found for the silane and unfilled resin group (p<0.05). A predominance of adhesive and cohesive failures was found. Differences regarding the homogeneity and thickness of the unfilled resin layer formed by different GFP surface treatments were observed. The application of silane and unfilled resin can improve the bond strength between GFP and resin composite. PMID:27058389

  15. Influence of pH, bleaching agents, and acid etching on surface wear of bovine enamel

    PubMed Central

    Soares, Ana Flávia; Bombonatti, Juliana Fraga Soares; Alencar, Marina Studart; Consolmagno, Elaine Cristina; Honório, Heitor Marques; Mondelli, Rafael Francisco Lia

    2016-01-01

    ABSTRACT Development of new materials for tooth bleaching justifies the need for studies to evaluate the changes in the enamel surface caused by different bleaching protocols. Objective The aim of this study was to evaluate the bovine dental enamel wear in function of different bleaching gel protocols, acid etching and pH variation. Material and Methods Sixty fragments of bovine teeth were cut, obtaining a control and test areas. In the test area, one half received etching followed by a bleaching gel application, and the other half, only the bleaching gel. The fragments were randomly divided into six groups (n=10), each one received one bleaching session with five hydrogen peroxide gel applications of 8 min, activated with hybrid light, diode laser/blue LED (HL) or diode laser/violet LED (VHL) (experimental): Control (C); 35% Total Blanc Office (TBO35HL); 35% Lase Peroxide Sensy (LPS35HL); 25% Lase Peroxide Sensy II (LPS25HL); 15% Lase Peroxide Lite (LPL15HL); and 10% hydrogen peroxide (experimental) (EXP10VHL). pH values were determined by a pHmeter at the initial and final time periods. Specimens were stored, subjected to simulated brushing cycles, and the superficial wear was determined (μm). ANOVA and Tukey´s tests were applied (α=0.05). Results The pH showed a slight decrease, except for Group LPL15HL. Group LPS25HL showed the highest degree of wear, with and without etching. Conclusion There was a decrease from the initial to the final pH. Different bleaching gels were able to increase the surface wear values after simulated brushing. Acid etching before bleaching increased surface wear values in all groups. PMID:27008254

  16. Influence of pH, bleaching agents, and acid etching on surface wear of bovine enamel.

    PubMed

    Soares, Ana Flávia; Bombonatti, Juliana Fraga Soares; Alencar, Marina Studart; Consolmagno, Elaine Cristina; Honório, Heitor Marques; Mondelli, Rafael Francisco Lia

    2016-02-01

    Development of new materials for tooth bleaching justifies the need for studies to evaluate the changes in the enamel surface caused by different bleaching protocols. Objective The aim of this study was to evaluate the bovine dental enamel wear in function of different bleaching gel protocols, acid etching and pH variation. Material and Methods Sixty fragments of bovine teeth were cut, obtaining a control and test areas. In the test area, one half received etching followed by a bleaching gel application, and the other half, only the bleaching gel. The fragments were randomly divided into six groups (n=10), each one received one bleaching session with five hydrogen peroxide gel applications of 8 min, activated with hybrid light, diode laser/blue LED (HL) or diode laser/violet LED (VHL) (experimental): Control (C); 35% Total Blanc Office (TBO35HL); 35% Lase Peroxide Sensy (LPS35HL); 25% Lase Peroxide Sensy II (LPS25HL); 15% Lase Peroxide Lite (LPL15HL); and 10% hydrogen peroxide (experimental) (EXP10VHL). pH values were determined by a pHmeter at the initial and final time periods. Specimens were stored, subjected to simulated brushing cycles, and the superficial wear was determined (μm). ANOVA and Tukey´s tests were applied (α=0.05). Results The pH showed a slight decrease, except for Group LPL15HL. Group LPS25HL showed the highest degree of wear, with and without etching. Conclusion There was a decrease from the initial to the final pH. Different bleaching gels were able to increase the surface wear values after simulated brushing. Acid etching before bleaching increased surface wear values in all groups. PMID:27008254

  17. Boronic acid recognition based-gold nanoparticle-labeling strategy for the assay of sialic acid expression on cancer cell surface by inductively coupled plasma mass spectrometry.

    PubMed

    Zhang, Xing; Chen, Beibei; He, Man; Zhang, Yuan; Peng, Lu; Hu, Bin

    2016-02-01

    Sialic acids are special sugars widely expressed at the termini of glycan chains on the cell surface, and their expression level on the cancer cell surface is much higher than on the normal cell surface. Herein, we reported an inductively coupled plasma mass spectrometry (ICP-MS) based method with elemental tags for the analysis of sialic acids on the cancer cell surface. The method is based on the selective recognition of sialic acids by biotinylated phenylboronic acid (biotin-APBA) at physiological pH and signal enhancement of gold nanoparticles (AuNPs) in ICP-MS when AuNPs were used as elemental tags labeled on biotin-APBA. A specificity test reveals that the proposed method has high specificity towards cancer cells. Taking HepG2 and MCF-7 cells as two model cancer cells, competitive experiments were performed to estimate the expression level of sialic acids on the cancer cell surface, and it was found that the average numbers of sialic acids expressed on the single MCF-7 and HepG2 cell surface were 7.0 × 10(9) and 5.4 × 10(9), respectively. With sialic acid as the biomarker for cancer cells, the method was further used for cell detection. The limits of detection in terms of cell number for HepG2 and MCF-7 cells were 120 and 64, respectively. And the relative standard deviations for nine replicate determinations of ca. 1000 HepG2 and MCF-7 cells were 9.6% and 8.9%, respectively. The linear ranges for HepG2 cells and MCF-7 cells were 300-10 000 and 170-11 000, respectively. The proposed approach is sensitive as well as selective for the analysis of sialic acids on the cancer cell surface, and is potentially applicable for the study of tumor malignancy and metastasis, which is helpful for biological research and clinical diagnostics. PMID:26811850

  18. Spectroscopic evidence for ternary surface complexes in the lead(II)-malonic acid-hematite system

    USGS Publications Warehouse

    Lenhart, J.J.; Bargar, J.R.; Davis, J.A.

    2001-01-01

    Using extended X-ray absorption fine structure (EXAFS) and attenuated total reflectance Fourier-transform infrared (ATR-FTIR) measurements, we examined the sorption of Pb(II) to hematite in the presence of malonic acid. Pb LIII-edge EXAFS measurements performed in the presence of malonate indicate the presence of both Fe and C neighbors, suggesting that a major fraction of surface-bound malonate is bonded to adsorbed Pb(II). In the absence of Pb(II), ATR-FTIR measurements of sorbed malonate suggest the formation of more than one malonate surface complex. The dissimilarity of the IR spectrum of malonate sorbed on hematite to those for aqueous malonate suggest at least one of the sorbed malonate species is directly coordinated to surface Fe atoms in an inner-sphere mode. In the presence of Pb, little change is seen in the IR spectrum for sorbed malonate, indicating that geometry of malonate as it coordinates to sorbed Pb(II) adions is similar to the geometry of malonate as it coordinates to Fe in the hematite surface. Fits of the raw EXAFS spectra collected from pH 4 to pH 8 result in average Pb-C distances of 2.98 to 3.14 A??, suggesting the presence of both four- and six-membered Pb-malonate rings. The IR results are consistent with this interpretation. Thus, our results suggest that malonate binds to sorbed Pb(II) adions, forming ternary metal-bridging surface complexes. ?? 2001 Academic Press.

  19. Fatty Acids Inhibit Apical Membrane Chloride Channels in Airway Epithelia

    NASA Astrophysics Data System (ADS)

    Anderson, Matthew P.; Welsh, Michael J.

    1990-09-01

    Apical membrane Cl^- channels control the rate of transepithelial Cl^- secretion in airway epithelia. cAMP-dependent protein kinase and protein kinase C regulate Cl^- channels by phosphorylation; in cystic fibrosis cells, phosphorylation-dependent activation of Cl^- channels is defective. Another important signaling system involves arachidonic acid, which is released from cell membranes during receptor-mediated stimulation. Here we report that arachidonic acid reversibly inhibited apical membrane Cl^- channels in cell-free patches of membrane. Arachidonic acid itself inhibited the channel and not a cyclooxygenase or lipoxygenase metabolite because (i) inhibitors of these enzymes did not block the response, (ii) fatty acids that are not substrates for the enzymes had the same effect as arachidonic acid, and (iii) metabolites of arachidonic acid did not inhibit the channel. Inhibition occurred only when fatty acids were added to the cytosolic surface of the membrane patch. Unsaturated fatty acids were more potent than saturated fatty acids. Arachidonic acid inhibited Cl^- channels from both normal and cystic fibrosis cells. These results suggest that fatty acids directly inhibit apical membrane Cl^- channels in airway epithelial cells.

  20. Dissolved and acid available particulate beryllium in eastern UK surface waters.

    PubMed

    Neal, Colin

    2003-10-01

    The concentrations of beryllium (Be) in surface waters are presented for major water quality surveys of eastern UK rivers, based on extensive work within a major environmental programme, the Land Ocean Interaction Study (LOIS). Two measurements were made, one for dissolved Be (i.e. the fraction that can pass through 0.45-microm membrane filters) the other for acid available total Be (dissolved Be plus the fraction of particulate Be that can be leached by a 1% v/v concentrated nitric acid solution). Dissolved Be concentrations are generally less than 1 microg l(-1) with a mean of approximately 0.02 microg l(-1), but higher values occur across the eastern UK rivers between 16th October and 7th November 1995 under neutral to alkaline conditions where Be would not be expected to be mobile. The higher values vary from river to river and there is a marked increase from north to south with particularly high concentrations (up to 29 microg l(-1)) for the industrial and urban impacted rivers of the southern Humber basin. The results show a major increase in dissolved Be at a time of exceptional drought conditions and climate instability, which seems to be linked to industrial/urban catchment systems. The average dissolved Be flux is 0.22 gha(-1) year(-1) with a range in mean across the sites of 0.08-0.45 gha(-1) year(-1). Without the period of enhanced Be concentrations, the Be flux through the period would have been approximately 40% less. There is no clear distinction between the dissolved Be flux for the rural and urban/industrial catchment systems. Acid available particulate Be (AAPBe) concentrations are low across the eastern UK rivers, they range between 0 and 1.33 microg l(-1) with a mean of 0.02 microg l(-1) and the highest concentrations occur for the industrial/urban rivers (approximately twice the levels occurring within the rural rivers). The AAPBe concentrations are linearly correlated with the concentrations of suspended sediment, particulate organic carbon

  1. Photoresponsive surface molecularly imprinted polymer on ZnO nanorods for uric acid detection in physiological fluids.

    PubMed

    Tang, Qian; Li, Zai-Yong; Wei, Yu-Bo; Yang, Xia; Liu, Lan-Tao; Gong, Cheng-Bin; Ma, Xue-Bing; Lam, Michael Hon-Wah; Chow, Cheuk-Fai

    2016-09-01

    A photoresponsive surface molecularly imprinted polymer for uric acid in physiological fluids was fabricated through a facile and effective method using bio-safe and biocompatible ZnO nanorods as a support. The strategy was carried out by introducing double bonds on the surface of the ZnO nanorods with 3-methacryloxypropyltrimethoxysilane. The surface molecularly imprinted polymer on ZnO nanorods was then prepared by surface polymerization using uric acid as template, water-soluble 5-[(4-(methacryloyloxy)phenyl)diazenyl]isophthalic acid as functional monomer, and triethanolamine trimethacryl ester as cross-linker. The surface molecularly imprinted polymer on ZnO nanorods showed good photoresponsive properties, high recognition ability, and fast binding kinetics toward uric acid, with a dissociation constant of 3.22×10(-5)M in aqueous NaH2PO4 buffer at pH=7.0 and a maximal adsorption capacity of 1.45μmolg(-1). Upon alternate irradiation at 365 and 440nm, the surface molecularly imprinted polymer on ZnO nanorods can quantitatively uptake and release uric acid. PMID:27207036

  2. Inosculation and perfusion of pre-vascularized tissue patches containing aligned human microvessels after myocardial infarction.

    PubMed

    Riemenschneider, Sonja B; Mattia, Donald J; Wendel, Jacqueline S; Schaefer, Jeremy A; Ye, Lei; Guzman, Pilar A; Tranquillo, Robert T

    2016-08-01

    A major goal of tissue engineering is the creation of pre-vascularized tissues that have a high density of organized microvessels that can be rapidly perfused following implantation. This is especially critical for highly metabolic tissues like myocardium, where a thick myocardial engineered tissue would require rapid perfusion within the first several days to survive transplantation. In the present work, tissue patches containing human microvessels that were either randomly oriented or aligned were placed acutely on rat hearts post-infarction and for each case it was determined whether rapid inosculation could occur and perfusion of the patch could be maintained for 6 days in an infarct environment. Patches containing self-assembled microvessels were formed by co-entrapment of human blood outgrowth endothelial cells and human pericytes in fibrin gel. Cell-induced gel contraction was mechanically-constrained resulting in samples with high densities of microvessels that were either randomly oriented (with 420 ± 140 lumens/mm(2)) or uniaxially aligned (with 940 ± 240 lumens/mm(2)) at the time of implantation. These patches were sutured onto the epicardial surface of the hearts of athymic rats following permanent ligation of the left anterior descending artery. In both aligned and randomly oriented microvessel patches, inosculation occurred and perfusion of the transplanted human microvessels was maintained, proving the in vivo vascularization potential of these engineered tissues. No difference was found in the number of human microvessels that were perfused in the randomly oriented (111 ± 75 perfused lumens/mm(2)) and aligned (173 ± 97 perfused lumens/mm(2)) patches. Our results demonstrate that tissue patches containing a high density of either aligned or randomly oriented human pre-formed microvessels achieve rapid perfusion in the myocardial infarct environment - a necessary first-step toward the creation of a thick, perfusable heart patch. PMID

  3. Surface discharge and tracking phenomena induced on acrylonitrile-butadiene-styrene polymer dielectric material by acid rain

    NASA Astrophysics Data System (ADS)

    Wang, X.; Yoshimura, N.

    1999-05-01

    The discharge and tracking phenomena induced on the polymer dielectric materials by acid rain are investigated by the accelerated aging of acrylonitrile-butadiene-styrene copolymer in artificial rainwater in this article. Based on the investigation of acid rain, the artificial rainwater is chosen to agree well with the actual ingredients of precipitation. The influence of hydrophobicity degradation on the surface discharge and tracking is studied. The relations among the surface discharge, tracking, hydrophobicity, and microchemical structure and physical morphology of material are furthermore discussed. Experimental results show that the polymer dielectric materials suffer a large attack and degradation from acid rain. The dielectric surface degrades and becomes rough, and the hydrophobicity decreases so that the surface discharge and tracking may occur on them.

  4. Determination of trifluoroacetic acid in 1996--1997 precipitation and surface waters in California and Nevada

    SciTech Connect

    Wujcik, C.E.; Cahill, T.M.; Seiber, J.N.

    1999-05-15

    The atmospheric degradation of three chlorofluorocarbon (CFC) replacement compounds, namely HFC-134a, HCFC-123, and HCFC-124, results in the formation of trifluoroacetic acid (TFA). Concentrations of TFA were determined in precipitation and surface water samples collected in California and Nevada during 1996--1997. Terminal lake systems were found to have concentrations 4--13 times higher than their calculated yearly inputs, providing evidence for accumulation. The results support dry deposition as the primary contributor of TFA to surface waters in arid and semiarid environments. Precipitation samples obtained from three different locations contained 20.7--1530 ng/L with significantly higher concentrations in fogwater over rainwater. Elevated levels of TFA were observed for rainwater collected in Nevada over those collected in California, indicating continual uptake and concentration as clouds move from a semiarid to arid climate. Thus several mechanisms exist, including evaporative concentration, vapor-liquid phase partitioning, lowered washout volumes of atmospheric deposition water, and dry deposition, which may lead to elevated concentrations of TFA in atmospheric and surface waters above levels expected from usual rainfall washout.

  5. Cross-Linking Poly(lactic acid) Film Surface by Neutral Hyperthermal Hydrogen Molecule Bombardment.

    PubMed

    Du, Wangli; Shao, Hong; He, Zhoukun; Tang, Changyu; Liu, Yu; Shen, Tao; Zhu, Yan; Lau, Woon-ming; Hui, David

    2015-12-16

    Constructing a dense cross-linking layer on a polymer film surface is a good way to improve the water resistance of poly(lactic acid) (PLA). However, conventional plasma treatments have failed to achieve the aim as a result of the unavoidable surface damage arising from the charged species caused by the uncontrolled high energy coming from colliding ions and electrons. In this work, we report a modified plasma method called hyperthermal hydrogen-induced cross-linking (HHIC) technology to construct a dense cross-linking layer on PLA film surfaces. This method produces energy-controlled neutral hyperthermal hydrogen, which selectively cleaves C-H bonds by molecule collision from the PLA film without breaking other bonds (e.g., C-C bonds in the polymer backbone), and results in subsequent cross-linking of the carbon radicals generated from the organic molecules. The formation of a dense cross-linking layer can serve as a barrier layer to significantly improve both the hydrophobicity and water vapor barrier property of the PLA film. Because of the advantage of selective cleavage of C-H bonds by HHIC treatment, the original physical properties (e.g., mechanical strength and light transmittance) of the PLA films are well-preserved. PMID:26594874

  6. Surface-modified hyaluronic acid hydrogels to capture endothelial progenitor cells.

    PubMed

    Camci-Unal, Gulden; Aubin, Hug; Ahari, Amirhossein Farajzadeh; Bae, Hojae; Nichol, Jason William; Khademhosseini, Ali

    2010-10-21

    A major challenge to the effective treatment of injured cardiovascular tissues is the promotion of endothelialization of damaged tissues and implanted devices. For this reason, there is a need for new biomaterials that promote endothelialization to enhance vascular repair. The goal of this work was to develop antibody-modified polysaccharide-based hydrogels that could selectively capture endothelial progenitor cells (EPCs). We showed that CD34 antibody immobilization on hyaluronic acid (HA) hydrogels provides a suitable surface to capture EPCs. The effect of CD34 antibody immobilization on EPC adhesion was found to be dependent on antibody concentration. The highest level of EPC attachment was found to be 52.2 cells per mm(2) on 1% HA gels modified with 25 μg mL(-1) antibody concentration. Macrophages did not exhibit significant attachment on these modified hydrogel surfaces compared to the EPCs, demonstrating the selectivity of the system. Hydrogels containing only HA, with or without immobilized CD34, did not allow for spreading of EPCs 48 h after cell seeding, even though the cells were adhered to the hydrogel surface. To promote spreading of EPCs, 2% (w/v) gelatin methacrylate (GelMA) containing HA hydrogels were synthesized and shown to improve cell spreading and elongation. This strategy could potentially be useful to enhance the biocompatibility of implants such as artificial heart valves or in other tissue engineering applications where formation of vascular structures is required. PMID:22368689

  7. Fundamental mechanistic studies in formic acid decomposition on transition metal surfaces

    NASA Astrophysics Data System (ADS)

    Mavrikakis, Manos

    2014-03-01

    Formic acid (HCOOH) is a simple molecule that is an abundant product of biomass processing and can serve as an internal source of hydrogen for oxygen removal and upgrading of biomass to chemicals and fuels. In addition, HCOOH can be used as a fuel for low temperature direct fuel cells. We present a systematic study of the HCOOH decomposition reaction mechanism starting from first-principles and including reactivity experiments and microkinetic modeling. In particular, periodic self-consistent Density Functional Theory (DFT) calculations are performed to determine the stability of reactive intermediates and activation energy barriers of elementary steps. Pre-exponential factors are determined from vibrational frequency calculations. Mean-field microkinetic models are developed and calculated reaction rates and reaction orders are then compared with experimentally measured ones. These comparisons provide useful insights on the nature of the active site, most-abundant surface intermediates as a function of reaction conditions and feed composition. Trends across metals on the fundamental atomic-scale level up to selectivity trends will be discussed. Finally, we identify from first-principles alloy surfaces, which may possess better catalytic properties for selective dehydrogenation of HCOOH than monometallic surfaces, thereby guiding synthesis towards promising novel catalytic materials. Work supported as part of the Institute of Atom-efficient Chemical Transformation (IACT), an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences.

  8. Reducing Pt use in the catalysts for formic acid electrooxidation via nanoengineered surface structure

    NASA Astrophysics Data System (ADS)

    Liao, Mengyin; Wang, Yulu; Chen, Guoqin; Zhou, Hua; Li, Yunhua; Zhong, Chuan-Jian; Chen, Bing H.

    2014-07-01

    The design of active and durable catalysts for formic acid (FA) electrooxidation requires controlling the amount of three neighboring platinum atoms in the surface of Pt-based catalysts. Such requirement is studied by preparing Pt decorated Pd/C (donated as Pt-Pd/C) with various Pt:Pd molar ratios via galvanic displacement making the amount of three neighboring Pt atoms in the surface of Pt-Pd/C tunable. The decorated nanostructures are confirmed by XPS, HS-LEIS, cyclic voltammetry and chronoamperometric measurements, demonstrating that Pt-Pd/C (the optimal molar ratio, Pt:Pd = 1:250) exhibits superior activity and durability than Pd/C and commercial Pt/C (J-M, 20%) catalysts for FA electrooxidation. The mass activity of Pt-Pd/C (Pt:Pd = 1:250) (3.91 A mg-1) is about 98 and 6 times higher than that of commercial Pt/C (0.04 A mg-1) and Pd/C (0.63 A mg-1) at a given potential of 0.1 V vs SCE, respectively. The controlled synthesis of Pt-Pd/C lead to the formation of largely discontinuous Pd and Pt sites and inhibition of CO formation, exhibiting unprecedented electrocatalytic performance toward FA electrooxidation while the cost of the catalyst almost the same as Pd/C. These findings have profound implications to the design and nanoengineering of decorated surfaces of catalysts for FA electrooxidation.

  9. Enhanced topical delivery of hyaluronic acid encapsulated in liposomes: A surface-dependent phenomenon.

    PubMed

    Vázquez-González, Martha L; Calpena, Ana C; Domènech, Òscar; Montero, M Teresa; Borrell, Jordi H

    2015-10-01

    In the present study, we investigated the release and permeation of hyaluronic acid (HA) encapsulated in liposomes when deposited onto two surfaces: cellulose, a model widely used for investigating transport of drugs; and human skin, a natural biointerface used for transdermal drug delivery. We prepared and characterised liposomes loaded with HA and liposomes incorporating two penetration enhancers (PEs): the non-ionic surfactant Tween 80, and Transcutol P, a solubilising agent able to mix with polar and non-polar solvents. In vitro and ex vivo permeation assays showed that PEs indeed enhance HA-release from liposomes. Since one of the possible mechanisms postulated for the action of liposomes on skin is related to its adsorption onto the stratum corneum (SC), we used atomic force microscopy (AFM) topography and force volume (FV) analysis to investigate the structures formed after deposition of liposome formulations onto the investigated surfaces. We explored the possible relationship between the formation of planar lipid structures on the surfaces and the permeation of HA. PMID:26142626

  10. Reversal of the surface charge asymmetry in purple membrane due to single amino acid substitutions.

    PubMed Central

    Hsu, K C; Rayfield, G W; Needleman, R

    1996-01-01

    Twenty-seven mutant bacteriorhodopsin's were screened to determine the PKa for reversal of the permanent electric dipole moment. The photoelectric response of an aqueous purple-membrane suspension was used to determine the direction of the purple-membrane dipole moment as a function of pH. The pK(a) for the dipole reversal of wild-type bacteriorhodopsin is 4.5. Six of the 27 mutant bacteriorhodopsin's were found to have a pK(a) for dipole reversal larger than that of wild-type bacteriorhodopsin. Two of these mutants, L93T and L93W, involve a neutral amino acid substitution in the interior of the protein. The direction of the purple-membrane permanent electric dipole moment is determined by the purple-membrane surface charge asymmetry. We conclude that these two substitutions, which do not involve charge replacement, alter the pK(a) for the reversal of the purple-membrane surface charge asymmetry. We suggest that these changes to the pK(a) are due to altered protein folding at the surface of the purple-membrane induced by single-site substitutions in the protein interior. PMID:9172760

  11. Predominance and sources of alkane and fatty acid biomarkers in the surface sediments of Chitrapuzha River (South India).

    PubMed

    Sanil Kumar, K S; Nair, S M

    2015-04-01

    Surface sediment samples were collected from Chitrapuzha (Cochin) estuarine system to identify the natural and anthropogenic origin of organic matter. The distribution and sources of organic matter were assessed with the help of fatty acid and alkane biomarkers. Fatty acids ranging from C12 to C28 were identified and C16:0 was the most abundant fatty acid, which contributed between 23.5 % and 52.4 % to total fatty acids. The low levels of polyunsaturated fatty acids indicate the effective bacterial recycling of algal fatty acids during the whole settling and depositing process. Aliphatic hydrocarbons ranging from C12 to C33 were identified and the total concentration ranged from 7876 to 43,357 ng g(-1). The presence of unresolved complex mixtures and lower pristane to phytane ratios indicates the petroleum contamination in the study area. PMID:25694163

  12. Preparation of surface imprinted material of single enantiomer of mandelic acid with a new surface imprinting technique and study on its chiral recognition and resolution properties.

    PubMed

    Gao, Baojiao; Chen, Lulu; Li, Yanbin

    2016-04-22

    A surface imprinted material of the single enantiomer of mandelic acid with high performance was successfully prepared with a new surface imprinting technique of synchronously graft-polymerizing and molecule imprinting, and its enantiomeric recognition and resolution properties were investigated. Micro-sized silica gel particles were first modified with coupling agent γ-mercaptopropyl trimethoxysilane (MPMS), obtaining the modified particles MPMS-SiO2 on which mercapto groups were introduced. A surface initiating system of -SH/BPO was constituted with the mercapto group (-SH) on MPMS-SiO2 particles and dibenzoyl peroxide (BPO) in N,N-dimethyl formamide (DMF) solution. In DMF solution, (R)-mandelic acid molecule was used as the template and the functional monomer hydroxyethyl methylacrylate (HEMA) were combined together by right of multi-site hydrogen bonds. The free radicals produced on MPMS-SiO2 particles initiate HEMA molecules around (R)-mandelic acid molecules and the crosslinking agent N,N'-Methylenebisacrylamide (MBA) to produce graft/crosslinking-polymerization. At the same time, the template (R)-mandelic acid molecules were enveloped within the thin grafted polymer layer on the surfaces of SiO2 particles, obtaining (R)-mandelic acid surface imprinted material MIP-PHEMA/SiO2. The experimental results show that MIP-PHEMA/SiO2 particles have excellent enantiomeric recognition and resolution ability. The binding capacity of MIP-PHEMA/SiO2 particles for (R)-mandelic acid reaches up to 278mg/g. As the resolution experiment of a racemic mixture was carried out with MIP-PHEMA/SiO2 particles as solid adsorbent, relative another enantiomer, (S)-mandelic acid, the selectivity coefficient of the imprinted particles for (R)-mandelic acid is 5.02. As a consequence, the two enantiomers were well separated, and the optical purities (ee values) of the supernatant and eluant get up to 44% (corresponding to (S)-mandelic acid excess) and 85% (corresponding to (R

  13. Soil, Seeds, and the Pumpkin Patch!

    ERIC Educational Resources Information Center

    Phillips, Marianne; Vowell, Julie

    2013-01-01

    "Soil, Seeds, and the Pumpkin Patch!" is an integrated unit designed to provide elementary school teachers with ideas for using hands-on activities, fostering inquiry and valuable discussion, and using technology as a learning tool. This unit integrates science with language arts, mathematics, literature, and technology. During this unit, students…

  14. Juno Microwave Radiometer Patch Array Antennas

    NASA Technical Reports Server (NTRS)

    Chamberlain, N.; Chen, J.; Focardi, P.; Hodges, R.; Hughes, R.; Jakoboski, J.; Venkatesan, J.; Zawadzki, M.

    2009-01-01

    Juno is a mission in the NASA New Frontiers Program with the goal of significantly improving our understanding of the formation and structure of Jupiter. This paper discusses the modeling and measurement of the two patch array antennas. An overview of the antenna architecture, design and development at JPL is provided, along with estimates of performance and the results of measurements.

  15. Perturbation analysis for patch occupancy dynamics

    USGS Publications Warehouse

    Martin, Julien; Nichols, James D.; McIntyre, Carol L.; Ferraz, Goncalo; Hines, James E.

    2009-01-01

    Perturbation analysis is a powerful tool to study population and community dynamics. This article describes expressions for sensitivity metrics reflecting changes in equilibrium occupancy resulting from small changes in the vital rates of patch occupancy dynamics (i.e., probabilities of local patch colonization and extinction). We illustrate our approach with a case study of occupancy dynamics of Golden Eagle (Aquila chrysaetos) nesting territories. Examination of the hypothesis of system equilibrium suggests that the system satisfies equilibrium conditions. Estimates of vital rates obtained using patch occupancy models are used to estimate equilibrium patch occupancy of eagles. We then compute estimates of sensitivity metrics and discuss their implications for eagle population ecology and management. Finally, we discuss the intuition underlying our sensitivity metrics and then provide examples of ecological questions that can be addressed using perturbation analyses. For instance, the sensitivity metrics lead to predictions about the relative importance of local colonization and local extinction probabilities in influencing equilibrium occupancy for rare and common species.

  16. Multimode Broad-Band Patch Antennas

    NASA Technical Reports Server (NTRS)

    Romanofsky, Robert R.

    2003-01-01

    Microstrip patch antennas of a proposed type would be tunable over broad wavelength ranges. These antennas would be attractive for use in a variety of microwave communication systems in which there are requirements for transmission and/or reception at multiple, widely separated frequencies. Prior efforts to construct tunable microstrip patch antennas have involved integration of microstrip circuitry with, variously, ferrite films with magneticfield tuning, solid-state electronic tuning devices, or piezoelectric tuning actuators. Those efforts have been somewhat successful, but have yielded tuning ranges of 20 percent and smaller much smaller than needed in typical practical cases. Like prior microstrip patch antennas (both tunable and non-tunable), the proposed antennas would have instantaneous bandwidths of about 1 percent of their nominal or resonance frequencies. However, these would be tunable over much broader frequency ranges as much as several octaves, depending on specific designs. They could be fabricated relatively simply and inexpensively by use of conventional photolithography, and without need for integration with solid-state electronic or piezoelectric control devices. An antenna as proposed (see figure) would include a microstrip patch radiating element on a thin ferroelectric film on a semiconductor substrate with a ground-plane conductor on the underside of the substrate. The ferroelectric film could be, for example, SrTiO3 with a thickness of the order of 1 or 2 micrometers.

  17. Hoyeraal-Hreidarsson syndrome caused by a germline mutation in the TEL patch of the telomere protein TPP1.

    PubMed

    Kocak, Hande; Ballew, Bari J; Bisht, Kamlesh; Eggebeen, Rebecca; Hicks, Belynda D; Suman, Shalabh; O'Neil, Adri; Giri, Neelam; Maillard, Ivan; Alter, Blanche P; Keegan, Catherine E; Nandakumar, Jayakrishnan; Savage, Sharon A

    2014-10-01

    Germline mutations in telomere biology genes cause dyskeratosis congenita (DC), an inherited bone marrow failure and cancer predisposition syndrome. DC is a clinically heterogeneous disorder diagnosed by the triad of dysplastic nails, abnormal skin pigmentation, and oral leukoplakia; Hoyeraal-Hreidarsson syndrome (HH), a clinically severe variant of DC, also includes cerebellar hypoplasia, immunodeficiency, and intrauterine growth retardation. Approximately 70% of DC cases are associated with a germline mutation in one of nine genes, the products of which are all involved in telomere biology. Using exome sequencing, we identified mutations in Adrenocortical Dysplasia Homolog (ACD) (encoding TPP1), a component of the telomeric shelterin complex, in one family affected by HH. The proband inherited a deletion from his father and a missense mutation from his mother, resulting in extremely short telomeres and a severe clinical phenotype. Characterization of the mutations revealed that the single-amino-acid deletion affecting the TEL patch surface of the TPP1 protein significantly compromises both telomerase recruitment and processivity, while the missense mutation in the TIN2-binding region of TPP1 is not as clearly deleterious to TPP1 function. Our results emphasize the critical roles of the TEL patch in proper stem cell function and demonstrate that TPP1 is the second shelterin component (in addition to TIN2) to be implicated in DC. PMID:25233904

  18. Influence of 4-cyano-4'-biphenylcarboxylic acid on the orientational ordering of cyanobiphenyl liquid crystals at chemically functionalized surfaces.

    PubMed

    Park, Joon-Seo; Jang, Chang-Hyun; Tingey, Matthew L; Lowe, Aaron M; Abbott, Nicholas L

    2006-12-15

    We report two methods that involve tailoring of the chemical composition of the nematic liquid crystal 4-cyano-4'-pentylbiphenyl to achieve control over the orientational ordering of the liquid crystal on chemically functionalized surfaces. The first method involves the direct addition of 4-cyano-4'-biphenylcarboxylic acid to 4-cyano-4'-pentylbiphenyl. The second method involves exposure of 4-cyano-4'-pentylbiphenyl to ultraviolet light and photochemical generation of a range of products, including 4-cyano-4'-biphenylcarboxylic acid. The addition of the acid or exposure to ultraviolet light accelerated the rate at which the liquid crystal exhibited an orientational transition from planar to perpendicular (homeotropic) alignment on surfaces presenting ammonium groups. The appearance of the homeotropic orientation of the UV-treated 4-cyano-4'-pentylbiphenyl on ammonium-terminated surfaces was dependent on the thickness of the film of liquid crystal (13-50 mum), consistent with a dipolar coupling between the liquid crystal and the electric field associated with an electrical double layer generated at the ammonium surface. Although the addition of 4-cyano-4'-biphenylcarboxylic acid or UV treatment of the liquid crystal also promoted homeotropic orientations on surfaces presenting hydroxyl groups, the orientations of the UV-treated liquid crystal on the hydroxyl-terminated surface did not change with thickness of the film of liquid crystal in the manner observed on the ammonium-terminated surfaces. The latter result indicates that the mechanism leading to homeotropic anchoring on hydroxyl-terminated surfaces is distinct from that on ammonium-terminated surfaces. Measurements performed using polarization modulation infrared reflection-absorption spectroscopy suggest that hydrogen bonding between the 4-cyano-4'-biphenylcarboxylic acid and the hydroxyl-terminated surface is responsible for the homeotropic anchoring on the surface. Finally, the orientation of the liquid

  19. How geomorphology and groundwater level affect the spatio-temporal variability of riverine cold water patches?

    NASA Astrophysics Data System (ADS)

    Wawrzyniak, Vincent; Piégay, Hervé; Allemand, Pascal; Vaudor, Lise; Goma, Régis; Grandjean, Philippe

    2016-04-01

    Temperature is a key factor for river ecosystems. In summer, patches of cold water are formed in the river by groundwater seepage. These patches have strong ecological significance and extend to the surface water in a well-mixed riverine system. These patches can serve as thermal refuges for some fish species during summer. In this study, the temporal variability and spatial distribution of cold water patches were explored along a 50 km river reach (the lower Ain River, France) using thermal infrared airborne remote sensing. This study examines a new range of processes acting on cold water patches at different scales that have not previously been touched upon in the literature. Three airborne campaigns were conducted during the summers of 2010, 2011 and 2014. Based on these images, a large number of cold water patches were identified using an automated method. Four types of patches were observed: tributary plumes, cold side channels (former channels or point-bar backwater channels), side seeps (located directly in the river channel) and gravel bar seeps (occurring at the downstream end of gravel bars). Logistic regression was used to analyse the longitudinal distribution of cold water patches according to geomorphologic indicators reflecting current or past fluvial process. Side seeps were found to be related to the local geology. Cold side channels were correlated to contemporary and past lateral river mobility. Gravel bar seeps were related to the current development of bars and are more prevalent in wandering reaches than in single-bed incised and paved reaches. The logistic model was subsequently used to evaluate gravel bar seep variability in the past. The model suggests larger numbers of seeps in the mid-20th century when bar surface area was higher. Interannual variability in the occurrence and spatial extent of side seeps and gravel bar seeps appear to be related to groundwater level fluctuations. Cold side channels exhibited greater interannual stability

  20. Effect of Acidic pH on Expression of Surface-Associated Proteins of Streptococcus oralis

    PubMed Central

    Wilkins, Joanna C.; Beighton, David; Homer, Karen A.

    2003-01-01

    Streptococcus oralis, a member of the mitis group of oral streptococci, is implicated in the pathogenesis of infective endocarditis and is the predominant aciduric non-mutans-group streptococcus in dental plaque. We undertook to identify the most abundant surface-associated proteins of S. oralis and to investigate changes in protein expression when the organism was grown under acidic culture conditions. Surface-associated proteins were extracted from cells grown in batch culture, separated by two-dimensional gel electrophoresis, excised, digested with trypsin, and analyzed by matrix-assisted laser desorption ionization-time of flight mass spectrometry and liquid chromatography-tandem mass spectrometry. Putative functions were assigned by homology to a translated genomic database of Streptococcus pneumoniae. A total of 27 proteins were identified; these included a lipoprotein, a ribosome recycling factor, and the glycolytic enzymes phosphoglycerate kinase, fructose bisphosphate aldolase, glyceraldehyde-3-phosphate dehydrogenase, and enolase. The most abundant protein, phosphocarrier protein HPr, was present as three isoforms. Neither lactate dehydrogenase nor pyruvate oxidase, dominant intracellular proteins, were present among the proteins on the gels, demonstrating that proteins in the surface-associated pool did not arise as a result of cell lysis. Eleven of the proteins identified were differentially expressed when cells were grown at pH 5.2 versus pH 7.0, and these included superoxide dismutase, a homologue of dipeptidase V from Lactococcus lactis, and the protein translation elongation factors G, Tu, and Ts. This study has extended the range of streptococcal proteins known to be expressed at the cell surface. Further investigations are required to ascertain their functions at this extracellular location and determine how their expression is influenced by other environmental conditions. PMID:12957916

  1. Plasma sterilization of poly lactic acid ultrasound contrast agents: surface modification and implications for drug delivery.

    PubMed

    Eisenbrey, John R; Hsu, Jennifer; Wheatley, Margaret A

    2009-11-01

    Poly lactic acid (PLA) ultrasound contrast agents (CA) have been developed previously in our laboratory for ultrasound (US) imaging, as well as surface coated with doxorubicin to create a potential targeted platform of chemotherapeutic delivery using focused US. However, we have previously found it impossible to sterilize these agents while at the same time maintaining their acoustic properties, a task that would probably require fabrication within a clean facility. The purpose of this paper is to investigate the feasibility of using plasma to sterilize these CA while maintaining maximum echogenicity, a step that would greatly facilitate in vivo investigations. Effects of plasma exposure time (1, 3 and 6 min) and intensity (low-10 mA, 6.8 W; medium-15 mA, 10.5 W; and high-25 mA, 18 W) on the CAs' acoustic properties, surface morphology, zeta potential, capacity to carry chemotherapeutics and overall sterility are described. Both increases in plasma intensity and exposure time increased CA zeta potential and also significantly increased drug payload. High-intensity plasma exposure for 3 min was found to be an optimal sterilization protocol for maximal (100%) preservation of CA echogenicity. Plasma exposure resulted in sterile samples and maintained original CA enhancement of 20 dB and acoustic half-life over 75 min, while increasing CA zeta potential by 11 mV and doxorubicin loading efficiency by 10%. This study not only shows how a highly temperature- and pressure-sensitive agent can be sterilized using plasma, but also that surface modification can be used to increase surface binding of the drug. PMID:19766380

  2. Prompt formation of organic acids in pulse ozonation of terpenes on aqueous surfaces

    NASA Astrophysics Data System (ADS)

    Hoffmann, M. R.; Colussi, A. J.; Enami, S.

    2010-12-01

    A major atmospheric process, the gas-phase ozonation of terpenes yields suites of products via a cascade of chemically activated intermediates that ranges from primary ozonides to dioxiranes. If a similar mechanism operated in water, as it is generally assumed, such intermediates would be deactivated within picoseconds and, henceforth, unable to produce carboxylic acids in microseconds. Herein we report the online electrospray mass spectrometric detection of (M + 2O - H+) and (M + 3O - H+) carboxylates on the surface of aqueous β-caryophyllene (C15H24, M = 204 Da) microjets exposed to a few ppmv O3(g) for < 10 μs. Since neither species is formed on dry solvent microjets, and both incorporate deuterium from D2O, we infer that carboxylates ensue from the interaction of nascent intermediates with interfacial water via a heretofore unreported mechanism. These interfacial events proceed much faster than in bulk liquids saturated with ozone.

  3. Quantitative Investigation of Protein-Nucleic Acid Interactions by Biosensor Surface Plasmon Resonance

    PubMed Central

    Wang, Shuo; Poon, Gregory M. K.; Wilson, W. David

    2015-01-01

    Biosensor-surface plasmon resonance (SPR) technology has emerged as a powerful label-free approach for the study of nucleic acid interactions in real time. The method provides simultaneous equilibrium and kinetic characterization for biomolecular interactions with minimal materials and without an external probe. A detailed and practical guide for protein-DNA interaction analyses using biosensor-SPR methods is presented. Details of the SPR technology and basic fundamentals are described with recommendations on the preparation of the SPR instrument, sensor chips and samples, as well as extensive information on experimental design, quantitative and qualitative data analyses and presentation. A specific example of the interaction of a transcription factor with DNA is shown with results evaluated by both kinetic and steady-state SPR methods. PMID:26404159

  4. Heterogeneous Photochemical Conversion of NO2 to HONO on the Humic Acid Surface under Simulated Sunlight.

    PubMed

    Han, Chong; Yang, Wangjin; Wu, Qianqian; Yang, He; Xue, Xiangxin

    2016-05-17

    The poor understanding of HONO sources in the daytime highlights the importance of the heterogeneous photochemical reaction of NO2 with aerosol or soil surfaces. The conversion of NO2 to HONO on humic acid (HA) under simulated sunlight was investigated using a flow tube reactor at ambient pressure. The uptake coefficient (γ) of NO2 linearly increased with irradiation intensity and HA mass in the range of 0-2.0 μg/cm(2), while it decreased with the NO2 concentration. The HONO yield was found to be independent of irradiation intensity, HA mass, and NO2 concentration. The temperature (278-308 K) had little influence on both γ and HONO yield. Additionally, γ increased continuously with relative humidity (RH, 7-70%), and a maximum HONO yield was observed at 40% RH. The heterogeneous photochemical reaction of NO2 with HA was explained by the Langmuir-Hinshelwood mechanism. PMID:27074517

  5. Antibacterial drugs as corrosion inhibitors for bronze surfaces in acidic solutions

    NASA Astrophysics Data System (ADS)

    Rotaru, Ileana; Varvara, Simona; Gaina, Luiza; Muresan, Liana Maria

    2014-12-01

    The present study is aiming to investigate the effect of four antibiotics (amoxicillin, ciprofloxacin, doxycycline and streptomycin,) belonging to different classes of antibacterial drugs on bronze corrosion in a solution simulating an acid rain (pH 4). Due to their ability to form protective films on the metal surface, the tested antibiotics act as corrosion inhibitors for bronze. The antibiotics were tested at various concentrations in order to determine the optimal concentration range for the best corrosion inhibiting effect. In evaluating the inhibition efficiency, polarization curves, electrochemical impedance spectroscopy, SEM and XPS measurements were used. Moreover, a correlation between the inhibition efficiency of some antibacterial drugs and certain molecular parameters was determined by quantum chemical computations. Parameters like energies EHOMO and ELUMO and HOMO-LUMO energy gap were used for correlation with the corrosion data.

  6. An amino acid code to define a protein's tertiary packing surface.

    PubMed

    Fraga, Keith J; Joo, Hyun; Tsai, Jerry

    2016-02-01

    One difficult aspect of the protein-folding problem is characterizing the nonspecific interactions that define packing in protein tertiary structure. To better understand tertiary structure, this work extends the knob-socket model by classifying the interactions of a single knob residue packed into a set of contiguous sockets, or a pocket made up of 4 or more residues. The knob-socket construct allows for a symbolic two-dimensional mapping of pockets. The two-dimensional mapping of pockets provides a simple method to investigate the variety of pocket shapes to understand the geometry of protein tertiary surfaces. The diversity of pocket geometries can be organized into groups of pockets that share a common core, which suggests that some interactions in pockets are ancillary to packing. Further analysis of pocket geometries displays a preferred configuration that is right-handed in α-helices and left-handed in β-sheets. The amino acid composition of pockets illustrates the importance of nonpolar amino acids in packing as well as position specificity. As expected, all pocket shapes prefer to pack with hydrophobic knobs; however, knobs are not selective for the pockets they pack. Investigating side-chain rotamer preferences for certain pocket shapes uncovers no strong correlations. These findings allow a simple vocabulary based on knobs and sockets to describe protein tertiary packing that supports improved analysis, design, and prediction of protein structure. PMID:26575337

  7. Acidic pH increases airway surface liquid viscosity in cystic fibrosis.

    PubMed

    Tang, Xiao Xiao; Ostedgaard, Lynda S; Hoegger, Mark J; Moninger, Thomas O; Karp, Philip H; McMenimen, James D; Choudhury, Biswa; Varki, Ajit; Stoltz, David A; Welsh, Michael J

    2016-03-01

    Cystic fibrosis (CF) disrupts respiratory host defenses, allowing bacterial infection, inflammation, and mucus accumulation to progressively destroy the lungs. Our previous studies revealed that mucus with abnormal behavior impaired mucociliary transport in newborn CF piglets prior to the onset of secondary manifestations. To further investigate mucus abnormalities, here we studied airway surface liquid (ASL) collected from newborn piglets and ASL on cultured airway epithelia. Fluorescence recovery after photobleaching revealed that the viscosity of CF ASL was increased relative to that of non-CF ASL. CF ASL had a reduced pH, which was necessary and sufficient for genotype-dependent viscosity differences. The increased viscosity of CF ASL was not explained by pH-independent changes in HCO3- concentration, altered glycosylation, additional pH-induced disulfide bond formation, increased percentage of nonvolatile material, or increased sulfation. Treating acidic ASL with hypertonic saline or heparin largely reversed the increased viscosity, suggesting that acidic pH influences mucin electrostatic interactions. These findings link loss of cystic fibrosis transmembrane conductance regulator-dependent alkalinization to abnormal CF ASL. In addition, we found that increasing Ca2+ concentrations elevated ASL viscosity, in part, independently of pH. The results suggest that increasing pH, reducing Ca2+ concentration, and/or altering electrostatic interactions in ASL might benefit early CF. PMID:26808501

  8. Pattern formation in fatty acid-nanoparticle and lipid-nanoparticle mixed monolayers at water surface

    NASA Astrophysics Data System (ADS)

    Choudhuri, M.; Datta, A.; Iyengar, A. N. Sekar; Janaki, M. S.

    2015-06-01

    Dodecanethiol-capped gold nanoparticles (AuNPs) are self-organized in two different amphiphilic monolayers one of which is a single-tailed fatty acid Stearic acid (StA) and the other a double-tailed lipid 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC). In the StA-AuNP film the AuNPs self-organize to form an interconnected network of nanoclusters on compression while in the DMPC-AuNP film the AuNPs aggregate to form random, isolated clusters in the film. The long time evolution of the films at constant surface pressure reveals ring structures in the former and diffusion limited aggregates in the latter that with time evolve into an irregular porous maze of AuNPs in the DMPC film. The difference in structure of the AuNP patterns in the two films can be attributed to a difference in the lipophilic interactions between the NPs and the amphiphilic molecules. The mean square intensity fluctuations f(ln) calculated along a typical line for the 2D structures in both the films at initial and final stages of long time evolution reflect the structural changes in the films over time.

  9. Dynamic wettability of wood surface modified by acidic dyestuff and fixing agent

    NASA Astrophysics Data System (ADS)

    Wei, Shuangying; Shi, Junyou; Gu, Jiyou; Wang, Di; Zhang, Yanhua

    2012-01-01

    Acidic dyestuffs can bring brilliant colors to the wood and fixing agents can avoid the color loss. They could change the surface wettability of wood, which impact the gluing process of veneers. In condition of the higher moisture content of wood, the rare veneers, the veneers dyed by acidic dyestuffs and the dyed veneers fixed by Chitosan were glued respectively by one-component wet-curing isocyanate adhesive and the contact angles (θ) of the different gluing interfaces were measured. The dynamic wettability of these gluing interfaces was characterized by both the contact angle θ and the spreading-penetration parameter (K) calculated by θ. The results showed that the θ-values decreased significantly with the extension of time and the initial contact angles (θi) decreased with the moisture contents of veneers increasing, but the variation of the balance contact angles (θe) was reversed with θi. When the moisture contents of veneers were same, the variation of θ of the rare veneers was minimal and the variation of θ of the fixed veneers was maximal. The K-values of these gluing interfaces all decreased significantly with the moisture contents of veneers increasing, but the variations of K were different. The wetting model describing the dynamic wetting process was established on the basis of these variations.

  10. Optimization of Acid Black 172 decolorization by electrocoagulation using response surface methodology

    PubMed Central

    2012-01-01

    This paper utilizes a statistical approach, the response surface optimization methodology, to determine the optimum conditions for the Acid Black 172 dye removal efficiency from aqueous solution by electrocoagulation. The experimental parameters investigated were initial pH: 4–10; initial dye concentration: 0–600 mg/L; applied current: 0.5-3.5 A and reaction time: 3–15 min. These parameters were changed at five levels according to the central composite design to evaluate their effects on decolorization through analysis of variance. High R2 value of 94.48% shows a high correlation between the experimental and predicted values and expresses that the second-order regression model is acceptable for Acid Black 172 dye removal efficiency. It was also found that some interactions and squares influenced the electrocoagulation performance as well as the selected parameters. Optimum dye removal efficiency of 90.4% was observed experimentally at initial pH of 7, initial dye concentration of 300 mg/L, applied current of 2 A and reaction time of 9.16 min, which is close to model predicted (90%) result. PMID:23369574

  11. Surface Chemical Compositions and Dispersity of Starch Nanocrystals Formed by Sulfuric and Hydrochloric Acid Hydrolysis

    PubMed Central

    Wei, Benxi; Xu, Xueming; Jin, Zhengyu; Tian, Yaoqi

    2014-01-01

    Surface chemical compositions of starch nanocrystals (SNC) prepared using sulfuric acid (H2SO4) and hydrochloric acid (HCl) hydrolysis were analyzed by X-ray photoelectron spectroscopy (XPS) and FT-IR. The results showed that carboxyl groups and sulfate esters were presented in SNC after hydrolysis with H2SO4, while no sulfate esters were detected in SNC during HCl-hydrolysis. TEM results showed that, compared to H2SO4-hydrolyzed sample, a wider size distribution of SNC prepared by HCl-hydrolysis were observed. Zeta-potentials were −23.1 and −5.02 mV for H2SO4- and HCl-hydrolyzed SNC suspensions at pH 6.5, respectively. Nevertheless, the zeta-potential values decreased to −32.3 and −10.2 mV as the dispersion pH was adjusted to 10.6. After placed 48 h at pH 10.6, zeta-potential increased to −24.1 mV for H2SO4-hydrolyzed SNC, while no change was detected for HCl-hydrolyzed one. The higher zeta-potential and relative small particle distribution of SNC caused more stable suspensions compared to HCl-hydrolyzed sample. PMID:24586246

  12. Acidic pH increases airway surface liquid viscosity in cystic fibrosis

    PubMed Central

    Tang, Xiao Xiao; Ostedgaard, Lynda S.; Hoegger, Mark J.; Moninger, Thomas O.; Karp, Philip H.; McMenimen, James D.; Choudhury, Biswa; Varki, Ajit; Stoltz, David A.; Welsh, Michael J.

    2016-01-01

    Cystic fibrosis (CF) disrupts respiratory host defenses, allowing bacterial infection, inflammation, and mucus accumulation to progressively destroy the lungs. Our previous studies revealed that mucus with abnormal behavior impaired mucociliary transport in newborn CF piglets prior to the onset of secondary manifestations. To further investigate mucus abnormalities, here we studied airway surface liquid (ASL) collected from newborn piglets and ASL on cultured airway epithelia. Fluorescence recovery after photobleaching revealed that the viscosity of CF ASL was increased relative to that of non-CF ASL. CF ASL had a reduced pH, which was necessary and sufficient for genotype-dependent viscosity differences. The increased viscosity of CF ASL was not explained by pH-independent changes in HCO3– concentration, altered glycosylation, additional pH-induced disulfide bond formation, increased percentage of nonvolatile material, or increased sulfation. Treating acidic ASL with hypertonic saline or heparin largely reversed the increased viscosity, suggesting that acidic pH influences mucin electrostatic interactions. These findings link loss of cystic fibrosis transmembrane conductance regulator–dependent alkalinization to abnormal CF ASL. In addition, we found that increasing Ca2+ concentrations elevated ASL viscosity, in part, independently of pH. The results suggest that increasing pH, reducing Ca2+ concentration, and/or altering electrostatic interactions in ASL might benefit early CF. PMID:26808501

  13. Detection of amino acid neurotransmitters by surface enhanced Raman scattering and hollow core photonic crystal fiber

    NASA Astrophysics Data System (ADS)

    Tiwari, Vidhu S.; Khetani, Altaf; Monfared, Ali Momenpour T.; Smith, Brett; Anis, Hanan; Trudeau, Vance L.

    2012-03-01

    The present work explores the feasibility of using surface enhanced Raman scattering (SERS) for detecting the neurotransmitters such as glutamate (GLU) and gamma-amino butyric acid (GABA). These amino acid neurotransmitters that respectively mediate fast excitatory and inhibitory neurotransmission in the brain, are important for neuroendocrine control, and upsets in their synthesis are also linked to epilepsy. Our SERS-based detection scheme enabled the detection of low amounts of GLU (10-7 M) and GABA (10-4 M). It may complement existing techniques for characterizing such kinds of neurotransmitters that include high-performance liquid chromatography (HPLC) or mass spectrography (MS). This is mainly because SERS has other advantages such as ease of sample preparation, molecular specificity and sensitivity, thus making it potentially applicable to characterization of experimental brain extracts or clinical diagnostic samples of cerebrospinal fluid and saliva. Using hollow core photonic crystal fiber (HC-PCF) further enhanced the Raman signal relative to that in a standard cuvette providing sensitive detection of GLU and GABA in micro-litre volume of aqueous solutions.

  14. Destabilization of pea lectin by substitution of a single amino acid in a surface loop.

    PubMed

    Hoedemaeker, F J; van Eijsden, R R; Díaz, C L; de Pater, B S; Kijne, J W

    1993-09-01

    Legume lectins are considered to be antinutritional factors (ANF) in the animal feeding industry. Inactivation of ANF is an important element in processing of food. In our study on the stability of Pisum sativum L. lectin (PSL), a conserved hydrophobic amino acid (Val103) in a surface loop was replaced with alanine. The mutant lectin, PSL V103A, showed a decrease in unfolding temperature (Tm) by some 10 degrees C in comparison with wild-type (wt) PSL, and the denaturation energy (delta H) is only about 55% of that of wt PSL. Replacement of an adjacent amino acid (Phe104) with alanine did not result in a significant difference in stability in comparison with wt PSL. Both mutations did not change the sugar-binding properties of the lectin, as compared with wt PSL and with PSL from pea seeds, at ambient temperatures. The double mutant, PSL V103A/F104A, was produced in Escherichia coli, but could not be isolated in an active (i.e. sugar-binding) form. Interestingly, the mutation in PSL V103A reversibly affected sugar-binding at 37 degrees C, as judged from haemagglutination assays. These results open the possibility of production of lectins that are active in planta at ambient temperatures, but are inactive and possibly non-toxic at 37 degrees C in the intestines of mammals. PMID:8400124

  15. An attenuated total reflectance IR study of silicic acid adsorbed onto a ferric oxyhydroxide surface

    NASA Astrophysics Data System (ADS)

    Swedlund, Peter J.; Miskelly, Gordon M.; McQuillan, A. James

    2009-07-01

    Silicic acid (H 4SiO 4) can have significant effects on the properties of iron oxide surfaces in both natural and engineered aquatic systems. Understanding the reactions of H 4SiO 4 on these surfaces is therefore necessary to describe the aquatic chemistry of iron oxides and the elements that associate with them. This investigation uses attenuated total reflectance infrared spectroscopy (ATR-IR) to study silicic acid in aqueous solution and the products formed when silicic acid adsorbs onto the surface of a ferrihydrite film in 0.01 M NaCl at pH 4. A spectrum of 1.66 mM H 4SiO 4 at pH 4 (0.01 M NaCl) has an asymmetric Si-O stretch at 939 cm -1 and a weak Si-O-H deformation at 1090 cm -1. ATR-IR spectra were measured over time (for up to 7 days) for a ferrihydrite film (≈1 mg) approaching equilibrium with H 4SiO 4 at concentrations between 0.044 and 0.91 mM. Adsorbed H 4SiO 4 had a broad spectral feature between 750 and 1200 cm -1 but the shape of the spectra changed as the amount of H 4SiO 4 adsorbed on the ferrihydrite increased. When the solid phase Si/Fe mole ratio was less than ≈0.01 the ATR-IR spectra had a maximum intensity at 943 cm -1 and the spectral shape suggests that a monomeric silicate species was formed via a bidentate linkage. As the solid phase Si/Fe mole ratio increased to higher values a discrete oligomeric silicate species was formed which had maximum intensity in the ATR-IR spectra at 1001 cm -1. The spectrum of this species suggests that it is larger than a dimer and it was tentatively identified as a cyclic tetramer. A small amount of a polymeric silica phase with a broad spectral feature centered at ≈1110 cm -1 was also observed at high surface coverage. The surface composition was estimated from the relative contribution of each species to the area of the ATR-IR spectra using multivariate curve resolution with alternating least squares. For a ferrihydrite film approaching equilibrium with 0.044, 0.14, 0.40 and 0.91 mM H 4SiO 4 the

  16. Patch burning: implications on water erosion and soil properties.

    PubMed

    Ozaslan Parlak, Altingul; Parlak, Mehmet; Blanco-Canqui, Humberto; Schacht, Walter H; Guretzky, John A; Mamo, Martha

    2015-05-01

    Patch burning can be a potential management tool to create grassland heterogeneity and enhance forage productivity and plant biodiversity, but its impacts on soil and environment have not been widely documented. In summer 2013, we studied the effect of time after patch burning (4 mo after burning [recently burned patches], 16 mo after burning [older burned patches], and unburned patches [control]) on vegetative cover, water erosion, and soil properties on a patch-burn experiment established in 2011 on a Yutan silty clay loam near Mead, NE. The recently burned patches had 29 ± 8.0% (mean ± SD) more bare ground, 21 ± 1.4% less canopy cover, and 40 ± 11% less litter cover than older burned and unburned patches. Bare ground and canopy cover did not differ between the older burned and unburned patches, indicating that vegetation recovered. Runoff depth from the older burned and recently burned patches was 2.8 times (19.6 ± 4.1 vs. 7.1 ± 3.0 mm [mean ± SD]) greater than the unburned patches. The recently burned patches had 4.5 times greater sediment loss (293 ± 89 vs. 65 ± 56 g m) and 3.8 times greater sediment-associated organic C loss (9.2 ± 2.0 vs. 2.4 ± 1.9 g m) than the older burned and unburned patches. The recently burned patches had increased daytime soil temperature but no differences in soil compaction and structural properties, dissolved nutrients, soil C, and total N concentration relative to older burned and unburned patches. Overall, recently burned patches can have reduced canopy and litter cover and increased water erosion, but soil properties may not differ from older burn or unburned patches under the conditions of this study. PMID:26024270

  17. Ceramic Paste for Patching High-Temperature Insulation

    NASA Technical Reports Server (NTRS)

    Adam, Steven J.; Tompkins, James V.; Toombs, Gordon R.; Hogensen, Pete; Soden, Douglas G.

    2007-01-01

    A ceramic paste that can be applied relatively easily, either by itself or in combination with one or more layer(s) of high-temperature ceramic fabrics, such as silicon carbide or zirconia, has been invented as a means of patching cracks or holes in the reinforced carbon-carbon forward surfaces of a space shuttle in orbit before returning to Earth. The paste or the paste/fabric combination could also be used to repair rocket-motor combustion chambers, and could be used on Earth to patch similar high-temperature structures. The specified chemical composition of the paste admits of a number of variations, and the exact proportions of its constituents are proprietary. In general, the paste consists of (1) silicon carbide, possibly with addition of (2) hafnium carbide, zirconium carbide, zirconium boride, silicon tetraboride, silicon hexaboride, or other metal carbides or oxides blended with (3) a silazane-based polymer. Because the paste is viscous and sticky at normal terrestrial and outer-space ambient temperatures, high-temperature ceramic fabrics such as silicon carbide or zirconia fabric impregnated with the paste (or the paste alone) sticks to the damaged surface to which it is applied. Once the patch has been applied, it is smoothed to minimize edge steps as required [forward-facing edge steps must be < or equal to 0.030 in. (< or equal to 0.76 mm) in the original intended space-shuttle application]. The patch is then heated to a curing temperature thereby converting it from a flexible material to a hard, tough material. The curing temperature is 375 to 450 F (approx.190 to 230 C). In torch tests and arc-jet tests, the cured paste was found to be capable of withstanding a temperature of 3,500 F (approx. 1,900 C) for 15 minutes. As such, the material appears to satisfy the requirement, in the original space-shuttle application, to withstand re-entry temperatures of approx.3,000 F (approx. 1,600 C).

  18. Experimental Fatigue Study of Composite Patch Repaired Steel Plates with Cracks

    NASA Astrophysics Data System (ADS)

    Karatzas, Vasileios A.; Kotsidis, Elias A.; Tsouvalis, Nicholas G.

    2015-10-01

    Cracks are among the most commonly encountered defects in metallic structures operating at sea. Composite patch repairing is a repair method which is gaining popularity as it counters most of the problems faced by conventional renewal repairs. Extensive studies can be found in the literature addressing the efficiency of this novel repair method using techniques which meet higher performance and monitoring standards than these commonly found in naval applications. In this work the efficiency of practices widely used in the ship repair industry for the implementation of composite patch repairing is addressed. To this end, steel plates repaired with composite patches were tested under fatigue loading. The composite patches consisted of carbon fibers in epoxy matrix and were directly laminated to the steel surface using the vacuum infusion method. Two different surface preparation methods, namely grit-blasting and mechanical treatment with the use of a needle gun were studied. In addition, in order to account for the harsh environmental conditions during the operating life of the structure and to study its effect on the repair, two different aging scenarios were considered. Non-destructive evaluation of the patches was performed so as to assess the quality of the repair, and the evolution of debonding during testing.

  19. Topography of the enteric nervous system in Peyer's patches of the porcine small intestine.

    PubMed

    Krammer, H J; Kühnel, W

    1993-05-01

    The mechanisms of intercommunication between the immune and nervous systems are not fully understood. In the case of the intestine, the enteric nervous system is involved in the regulation of immune responses. It was therefore decided to employ immuno-histochemical techniques to investigate the structural organization of the enteric nervous system in Peyer's patches of the porcine small intestine. Using antibodies against various nervous system-specific markers (protein gene product 9.5, neuron-specific enolase, neurofilament 200, S-100 protein and the glial fibrillary acidic protein), an intimate and specific structural association could be demonstrated between enteric nerves and the compartments of Peyer's patches: follicles, interfollicular regions and domes. Peyer's patches have a close topographical relationship to the two submucosal plexuses. Enteric nerves are located around the follicle in the interfollicular area--the so-called "traffic area"--and in the dome area, which plays an important role in the uptake and presentation of antigens. PMID:8513481

  20. How fulvic acid affects heavy metal uptake on the muscovite (001) surface

    NASA Astrophysics Data System (ADS)

    Lee, S.; Fenter, P.; Park, C.; Sturchio, N. C.; Nagy, K.

    2009-12-01

    Understanding the molecular-scale reactions at mineral-solution interfaces is crucial for developing predictive models to assess the transport and bioavailability of dissolved heavy metals in the surface environment. We investigated the vertical distribution of divalent heavy metals (Cu, Zn, Sr, Hg, and Pb) adsorbed at the muscovite (001)-solution interface in the absence and presence of fulvic acid (FA) using interface-specific specular X-ray reflectivity combined with element-specific resonant anomalous X-ray reflectivity with a sub-angstrom resolution. The experimental solutions were prepared using 1-10 mmol/kg metal nitrates with or without 100 mg/kg Elliott Soil Fulvic Acid II or Suwannee River Fulvic Acid from the International Humic Substances Society at pH 2-5.5. Reflectivity data were measured at the Advanced Photon Source, Argonne National Laboratory. In the absence of FA, the results show a complex picture in which there are three distinct adsorbed species that coexist at the interface: classical inner- and outer-sphere complexes plus a third OS fraction that is more broadly distributed at heights farther from the surface than the other species. Systematic trends in cation adsorption show that these three species are correlated and that their partitioning can be explained by thermodynamic equilibrium among these three species which is controlled mainly by cation hydration energy. The presence of dissolved FA modifies heavy metal uptake by two different mechanisms: it can form complexes with metal cations in solution and adsorb on muscovite as metal-organic complexes when the metal has a relatively high affinity for organic matter. In this case, the adsorbed metal cation shows a characteristic broad distribution within the entire film, resulting in formation of a more electron-dense and thicker organic film on muscovite compared to that without metals. Metals with lower organophilicity show that the enhanced metal uptake occurs mainly within the outer