Science.gov

Sample records for activated charcoal filter

  1. Activated Charcoal

    MedlinePlus

    ... ACTIVATED CHARCOAL are as follows:Trapping chemicals to stop some types of poisoning when used as a ... Charbon Végétal, Charbon Végétal Activé, Charcoal, Gas Black, Lamp Black, Medicinal Charcoal, Noir de Gaz, Noir de ...

  2. Assessment of the elution of charcoal, cellulose acetate, and other particles from cigarettes with charcoal and activated charcoal/resin filters.

    PubMed

    Agyei-Aye, K; Appleton, S; Rogers, R A; Taylor, C R

    2004-08-01

    This experiment was designed to study the release of cellulose acetate fibers, charcoal, and other particles from cigarettes with charcoal and activated charcoal/resin filters. For the first time in such studies, efforts were made to identify the particles that were eluted using other analytical techniques in addition to light microscopy. Other corrective measures were also implemented. During the studies it was found that trimming of larger filters to fit smaller filter housings introduced cellulose acetate-like particles from the fibers of the filter material. Special, custom made-to-fit filters were used instead. Tools such as forceps that were used to retrieve filters from their housings were also found to introduce fragments onto the filters. It is believed that introduction of such debris may have accounted for the very large number of cellulose acetate and charcoal particles that had been reported in the literature. Use of computerized particle-counting microscopes appeared to result in excessive number of particles. This could be because the filter or smoke pads used for such work do not have the flat and level surfaces ideal for computerized particle-counting microscopes. At the high magnifications that the pads were viewed for particles, constant focusing of the microscope would be essential. It was also found that determination of total particles by using extrapolation of particle count by grid population usually gave extremely high particle counts compared to the actual number of particles present. This could be because particle distributions during smoking are not uniform. Lastly, a less complex estimation of the thickness of the particles was adopted. This and the use of a simple mathematical conversion coupled with the Cox equation were utilized to assess the aerodynamic diameters of the particles. Our findings showed that compared to numbers quoted in the literature, only a small amount of charcoal, cellulose acetate shards, and other particles are

  3. Activated Charcoal

    MedlinePlus

    ... is used to treat poisonings, reduce intestinal gas (flatulence), lower cholesterol levels, prevent hangover, and treat bile ... lower cholesterol levels in the blood. Decreasing gas (flatulence). Some studies show that activated charcoal is effective ...

  4. Charcoal filter testing

    SciTech Connect

    Lyons, J.

    1997-08-01

    In this very brief, informal presentation, a representative of the US Nuclear Regulatory Commission outlines some problems with charcoal filter testing procedures and actions being taken to correct the problems. Two primary concerns are addressed: (1) the process to find the test method is confusing, and (2) the requirements of the reference test procedures result in condensation on the charcoal and causes the test to fail. To address these problems, emergency technical specifications were processed for three nuclear plants. A generic or an administrative letter is proposed as a more permanent solution. 1 fig.

  5. Activated charcoal filter counting for radioiodine effluent concentration determination in protein iodinations.

    PubMed

    Button, T M; Hamilton, R G

    1982-12-01

    Regulatory agencies have recently placed emphasis upon quantification of 125I released to the environment during protein iodinations at radioiodination facilities. This necessitates air sampling in order to determine the concentration of 125I in the effluent. Air sample trapping mechanisms generally employed are activated charcoal filters. Difficulty arises in quantifying the activity of 125I trapped because of the attenuation of the 125I decay photons by the charcoal. Evaluation of the activity incident upon commercially available filters using a scintillation detector and large detector source separation is considered here. It is demonstrated that the activity in the filter may be treated as an exponential distribution within an attentuating matrix. This treatment essentially adds a constant correction factor to the counting efficiency of a given geometry for a filter-affluent flow rate combination. Finally, it is shown that an approximation assuming a uniform distribution of activity produces a large error in correction factor to the counting efficiency for the filters examined. PMID:7152949

  6. Fabrication of Activated Rice Husk Charcoal by Slip Casting as a Hybrid Material for Water Filter Aid

    NASA Astrophysics Data System (ADS)

    Tuaprakone, T.; Wongphaet, N.; Wasanapiarnpong, T.

    2011-04-01

    Activated charcoal has been widely used as an odor absorbent in household and water purification industry. Filtration equipment for drinking water generally consists of four parts, which are microporous membrane (porous alumina ceramic or diatomite, or porous polymer), odor absorbent (activated carbon), hard water treatment (ion exchange resin), and UV irradiation. Ceramic filter aid is usually prepared by slip casting of alumina or diatomite. The membrane offers high flux, high porosity and maximum pore size does not exceed 0.3 μm. This study investigated the fabrication of hybrid activated charcoal tube for water filtration and odor absorption by slip casting. The suitable rice husk charcoal and water ratio was 48 to 52 wt% by weight with 1.5wt% (by dry basis) of CMC binder. The green rice husk charcoal bodies were dried and fired between 700-900 °C in reduction atmosphere. The resulting prepared slip in high speed porcelain pot for 60 min and sintered at 700 °C for 1 h showed the highest specific surface area as 174.95 m2/g. The characterizations of microstructure and pore size distribution as a function of particle size were investigated.

  7. Activated charcoal filters: Water treatment, pollution control, and industrial applications. (Latest citations from the Patent Bibliographic database with exemplary claims. ) Published Search

    SciTech Connect

    Not Available

    1993-08-01

    The bibliography contains citations of selected patents concerning activated charcoal filters and their applications in water treatment, pollution control, and industrial processes. Filtering methods and equipment for air and water purification, industrial distillation and extraction, industrial leaching, and filtration of toxic materials and contaminants are described. Applications include drinking water purification, filtering beverages, production of polymer materials, solvent and metal recovery, waste conversion, automotive fuel and exhaust systems, swimming pool filtration, tobacco smoke filters, kitchen ventilators, medical filtration treatment, and odor absorbing materials. (Contains 250 citations and includes a subject term index and title list.)

  8. Activated-charcoal filters: water treatment, pollution control, and industrial applications. January 1970-July 1988 (citations from the US Patent data base). Report for January 1970-July 1988

    SciTech Connect

    Not Available

    1988-08-01

    This bibliography contains citations of selected patents concerning activated-charcoal filters and their applications in water treatment, pollution control, and industrial processes. Filtering methods and equipment for air and water purification, industrial distillation and extraction, industrial leaching, and filtration of toxic gases and pollutants are described. Applications include drinking water purification, filtering beverages, production of polymer materials, solvent and metal recovery, swimming pool filtration, waste conversion, automobile fuel and exhaust systems, and footwear deodorizing. (Contains 129 citations fully indexed and including a title list.)

  9. Activated charcoal filters: Water treatment, pollution control, and industrial applications. (Latest citations from the US Patent Bibliographic File with exemplary claims). Published Search

    SciTech Connect

    Not Available

    1994-06-01

    The bibliography contains citations of selected patents concerning activated charcoal filters and their applications in water treatment, pollution control, and industrial processes. Filtering methods and equipment for air and water purification, industrial distillation and extraction, and filtration of toxic materials and contaminants are described. Applications are discussed, including drinking water purification, air and water pollution control, manufacture of industrial materials, materials recovery, waste treatment, automotive fuel and exhaust systems, cigarette filters, ventilation systems, medical filtration, and odor absorbing materials. (Contains a minimum of 125 citations and includes a subject term index and title list.)

  10. Activated charcoal filters: Water treatment, pollution control, and industrial applications. (Latest citations from the US Patent Bibliographic file with exemplary claims). Published Search

    SciTech Connect

    1996-01-01

    The bibliography contains citations of selected patents concerning activated charcoal filters and their applications in water treatment, pollution control, and industrial processes. Filtering methods and equipment for air and water purification, industrial distillation and extraction, and filtration of toxic materials and contaminants are described. Applications are discussed, including drinking water purification, air and water pollution control, manufacture of industrial materials, materials recovery, waste treatment, automotive fuel and exhaust systems, cigarette filters, ventilation systems, medical filtration, and odor absorbing materials. (Contains 50-250 citations and includes a subject term index and title list.) (Copyright NERAC, Inc. 1995)

  11. [Hygienic study of an activated fibrous charcoal material as a sorbing filtering element for drinking water afterpurification].

    PubMed

    Prokopov, V A; Mironets, N V; Gakal, R K; Maktaz, E D; Dugan, A M; Teteneva, I A; Tarabarova, S B; Martyshchenko, N V; Nadvornaia, Zh D

    1993-01-01

    The results of complex toxicological and hygienic study showed that the quality of pipe water filtered through the activated carbonic fibrous material (ACFM) "Dnepr-F" forming a part of absorptive filtering element improved markedly. The content of organic substances decreased drastically as well as that of nitrates and iron. Microbiological indices did not suffer appreciable changes and were within permissible limits. The water filtered through the absorptive element with ACFM had no adverse influence on the organisms of warm-blooded animals. Proceeding from foregoing one can conclude that the "Dnepr-F" may be recommended as a part of absorptive filtering element for the final refinement of drinking water. PMID:8209499

  12. Passivation of fluorinated activated charcoal

    SciTech Connect

    Del Cul, G.D.; Trowbridge, L.D.; Simmons, D.W.; Williams, D.F.; Toth, L.M.

    1997-10-01

    The Molten Salt Reactor Experiment (MSRE), at the Oak Ridge National Laboratory has been shut down since 1969 when the fuel salt was drained from the core into two Hastelloy N tanks at the reactor site. In 1995, a multiyear project was launched to remediate the potentially hazardous conditions generated by the movement of fissile material and reactive gases from the storage tanks into the piping system and an auxiliary charcoal bed (ACB). The top 12 in. of the ACB is known by gamma scan and thermal analysis to contain about 2.6 kg U-233. According to the laboratory tests, a few feet of fluorinated charcoal are believed to extend beyond the uranium front. The remainder of the ACB should consist of unreacted charcoal. Fluorinated charcoal, when subjected to rapid heating, can decompose generating gaseous products. Under confined conditions, the sudden exothermic decomposition can produce high temperatures and pressures of near-explosive characteristics. Since it will be necessary to drill and tap the ACB to allow installation of piping and instrumentation for remediation and recovery activities, it is necessary to chemically convert the reactive fluorinated charcoal into a more stable material. Ammonia can be administered to the ACB as a volatile denaturing agent that results in the conversion of the C{sub x}F to carbon and ammonium fluoride, NH{sub 4}F. The charcoal laden with NH{sub 4}F can then be heated without risking any sudden decomposition. The only consequence of heating the treated material will be the volatilization of NH{sub 4}F as a mixture of NH{sub 3} and HF, which would primarily recombine as NH{sub 4}F on surfaces below 200 C. The planned scheme for the ACB denaturing is to flow diluted ammonia gas in steps of increasing NH{sub 3} concentration, 2% to 50%, followed by the injection of pure ammonia. This report summarizes the planned passivation treatment scheme to stabilize the ACB and remove the potential hazards. It also includes basic information

  13. Dynamics and functions of bacterial communities in bark, charcoal and sand filters treating greywater.

    PubMed

    Dalahmeh, Sahar S; Jönsson, Håkan; Hylander, Lars D; Hui, Nan; Yu, Dan; Pell, Mikael

    2014-05-01

    This study explored the effects of greywater application on the dynamics and functions of biofilms developed in bark, activated charcoal and sand filters used for removal of organic matter and nitrogen. Duplicate columns (20 cm diameter, 60 cm deep) were packed with bark, charcoal or sand with effective size 1.4 mm and uniformity coefficient 2.2, and dosed with 32 L m(-2) day(-1) of an artificial greywater (14 g BOD5 m(-2) day(-1)) for 116 days. Potential respiration rate (PRR), determined in filter samples after addition of excess glucose, and bacterial diversity and composition, analysed by 454-pyrosequencing of bacterial 16S ribosomal DNA, were measured at different times and depths in the filters. The bark and charcoal filters were more efficient in removing BOD5 than the sand (98, 97% and 75%, respectively). The highest PRR in the 0-2 cm layer of the columns on day 84 was found in the bark filters, followed by the charcoal and sand filters (632 ± 66, 222 ± 34 and 56 ± 2 mg O2 L(-1), respectively; n = 2). Bacterial community in the bark filters showed the highest richness. The charcoal and sand filters both developed more diverse and dynamic (changing over time and depth) bacterial communities than the bark. In addition to the greywater, the lignocelluosic composition of the bark and its lower pH probably selected for the bacterial community structure and the organic content provided additional substrate, as shown by its higher PRR and its different nitrifying bacterial genera. In the oligotrophic charcoal and sand, the composition of the greywater itself defined the bacterial community. Thus, the initially low bacterial biomass in the latter filters was enriched over time, allowing a diversified bacterial community to develop. The top layers of the bark and charcoal filters displayed a high dominance of Rhizobium, Pseudomonas and Acinetobacter, which were less evident in the 60 cm layer, whereas in the sand filters these genera were

  14. Charcoal and activated carbon at elevated pressure

    SciTech Connect

    Antal, M.J. Jr.; Dai, Xiangfeng; Norberg, N.

    1995-12-01

    High quality charcoal has been produced with very high yields of 50% to 60% from macadamia nut and kukui nut shells and of 44% to 47% from Eucalyptus and Leucaena wood in a bench scale unit at elevated pressure on a 2 to 3 hour cycle, compared to commercial practice of 25% to 30% yield on a 7 to 12 day operating cycle. Neither air pollution nor tar is produced by the process. The effects of feedstock pretreatments with metal additives on charcoal yield are evaluated in this paper. Also, the influences of steam and air partial pressure and total pressure on yields of activated carbon from high yield charcoal are presented.

  15. [Paraquat poisoning and hemoperfusion with activated charcoal].

    PubMed

    López Lago, A M; Rivero Velasco, C; Galban Rodríguez, C; Mariño Rozados, A; Piñeiro Sande, N; Ferrer Vizoso, E

    2002-06-01

    Paraquat is a common herbicide in Spain. In our country there are a few cases of this intoxication and it presents a high mortality even if the patients ingest a minimal amount. We present two cases of accidental poisoning with paraquat. These patients were admitted three hours after ingestion of toxin. They were treated with with orogastric lavage, activated charcoal, N-acetylcysteine, Fuller's earth, cathartics, support measures and hemoperfusion with activated charcoal. With these treatments both patients had a undetectable levels of paraquat 48 hours after and improvement of their symptoms, gastric and intestinal predominantly . We present the graphics of evolution of the plasma and urine levels of paraquat in both patients. We review the different aspects of treatment and update of this poisoning. PMID:12152392

  16. Effect of activated charcoal on the pharmacokinetics of pholcodine, with special reference to delayed charcoal ingestion.

    PubMed

    Laine, K; Kivistö, K T; Ojala-Karlsson, P; Neuvonen, P J

    1997-02-01

    We conducted a randomized study with four parallel groups to investigate the effect of single and multiple doses of activated charcoal on the absorption and elimination of pholcodine administered in a cough syrup. The first group received 100 mg of pholcodine on an empty stomach with water only (control); the second group took 25 g of activated charcoal immediately after pholcodine; the third group received 25 g of activated charcoal 2 h and the fourth group 5 h after ingestion of the 100-mg dose of pholcodine. In addition, the fourth group received multiple doses (10 g each) of charcoal every 12 h for 84 h. Blood samples were collected for 96 h and urine for 72 h. Pholcodine concentrations were measured by high-performance liquid chromatography. A significant reduction in absorption was found when charcoal was administered immediately after pholcodine; the AUC0-96h was reduced by 91% (p < 0.0005), the Cmax by 77% (p < 0.0005), and the amount of pholcodine excreted into urine by 85% (p < 0.0005). When charcoal was administered 2 h after pholcodine, the AUC0-96h was reduced by 26% (p = 0.002), the Cmax by 23% (p = NS), and the urinary excretion by 28% (p = 0.004). When administered 5 h after pholcodine, charcoal produced only a 17% reduction in the AUC0-96h (p = 0.06), but reduced the further absorption of pholcodine still present in the gastrointestinal tract at the time of charcoal administration, as measured by AUC5-96h (p = 0.006). Repeated administration of charcoal failed to accelerate the elimination of pholcodine. We conclude that activated charcoal is effective in preventing the absorption of pholcodine, and its administration can be beneficial even several hours after pholcodine ingestion. PMID:9029746

  17. The effect of weathering on charcoal filter performance. 1; The adsorption and desorption behavior of contaminants

    SciTech Connect

    Wren, J.C.; Moore, C.J. )

    1991-05-01

    This paper reports on triethylenediamine (TEDA) impregnated charcoals, used in nuclear reactors to safeguard against the release of airborne radioiodine, which show high efficiency under various reactor operation and accident conditions when the are new. However, during normal operation, charcoal filters are continuously degraded (or weathered) due to the adsorption of moisture and other air contaminants. The effect of weathering on the efficiency of charcoal for removing radioiodine is of great interest. The results of a study on the adsorption behavior of various contaminants NO{sub 2}, SO{sub 2} 2-butanone (methyl-ethyl ketone (MEK)) and NH{sub 3} on TEDA charcoal are presented. This study is an attempt to characterize and quantify the weathering process of TEDA charcoal by these contaminants. The adsorption and desorption of characteristics of these contaminants range from completely irreversible (NO{sub 2}) to completely reversible (NH{sub 3}). The effect of absorbed water (or humidity) on absorption is different for each contaminant. Absorbed water increases the absorption rate and capacity of TEDA charcoal for NO{sub 2}. However, it appears that SO{sub 2} is absorbed as H{sub 2}SO{sub 4} on the wet charcoal. Absorbed water slightly reduces the adsorption capacity of the charcoal for MEK, but does not affect the absorption of NH{sub 3}.

  18. Activated coconut shell charcoal carbon using chemical-physical activation

    NASA Astrophysics Data System (ADS)

    Budi, Esmar; Umiatin, Nasbey, Hadi; Bintoro, Ridho Akbar; Wulandari, Futri; Erlina

    2016-02-01

    The use of activated carbon from natural material such as coconut shell charcoal as metal absorbance of the wastewater is a new trend. The activation of coconut shell charcoal carbon by using chemical-physical activation has been investigated. Coconut shell was pyrolized in kiln at temperature about 75 - 150 °C for about 6 hours in producing charcoal. The charcoal as the sample was shieved into milimeter sized granule particle and chemically activated by immersing in various concentration of HCl, H3PO4, KOH and NaOH solutions. The samples then was physically activated using horizontal furnace at 400°C for 1 hours in argon gas environment with flow rate of 200 kg/m3. The surface morphology and carbon content of activated carbon were characterized by using SEM/EDS. The result shows that the pores of activated carbon are openned wider as the chemical activator concentration is increased due to an excessive chemical attack. However, the pores tend to be closed as further increasing in chemical activator concentration due to carbon collapsing.

  19. Activated charcoal for acute overdose: a reappraisal.

    PubMed

    Juurlink, David N

    2016-03-01

    Sometimes mistakenly characterized as a 'universal antidote,' activated charcoal (AC) is the most frequently employed method of gastrointestinal decontamination in the developed world. Typically administered as a single dose (SDAC), its tremendous surface area permits the binding of many drugs and toxins in the gastrointestinal lumen, reducing their systemic absorption. Like other decontamination procedures, the utility of SDAC attenuates with time, and, although generally safe, it is not free of risk. A large body of evidence demonstrates that SDAC can reduce the absorption of drugs and xenobiotics but most such studies involve volunteers and have little generalizability to clinical practice. Few rigorous clinical trials of SDAC have been conducted, and none validate or refute its utility in those patients who are intuitively most likely to benefit. Over the past decade, a growing body of observational data have demonstrated that SDAC can elicit substantial reductions in drug absorption in acutely poisoned patients. The challenge for clinicians rests in differentiating those patients most likely to benefit from SDAC from those in whom meaningful improvement is doubtful. This is often a difficult determination not well suited to an algorithmic approach. The present narrative review summarizes the data supporting the benefits and harms of SDAC, and offers pragmatic suggestions for clinical practice. PMID:26409027

  20. Prehospital activated charcoal: the way forward

    PubMed Central

    Greene, S; Kerins, M; O'Connor, N

    2005-01-01

    Methods: A postal questionnaire was used to determine the current level of use of prehospital activated charcoal by ambulance NHS trusts, the incidence of associated complications, and barriers preventing the routine use of prehospital SDAC. Results: A completed questionnaire was returned by 36 of the 39 ambulance NHS trusts in the UK (response rate 92%). Currently none of the trusts that responded to the questionnaire provides prehospital SDAC as an intervention. The most common barriers to the provision of prehospital SDAC are the current lack of evidence in the medical literature proving it is effective in improving patient outcome and the lack of a recognised protocol for its administration. Other issues included concerns regarding potential complications, ambulance turnaround times, lack of availability of SDAC, and lack of funding. Conclusions: A lack of published evidence proving efficacy remains the most important factor in preventing the routine administration of SDAC to appropriate patients in the prehospital environment. Further research in this setting is required to determine the usefulness of this therapy. PMID:16189043

  1. Production of charcoal and activated carbon at elevated pressure

    SciTech Connect

    Dai, Xiangfeng; Norberg, N.; Antal, M.J. Jr.

    1995-12-31

    With its wide range of properties, charcoal finds many commercial applications for domestic cooking, refining of metals (steel, copper, bronze, nickel, aluminum and electro-manganese), production of chemicals (carbon disulfide, calcium carbide, silicon carbide, sodium cyanide, carbon black, fireworks, gaseous chemicals, absorbents, soil conditioners and pharmaceuticals), as well as production of activated carbon and synthesis gas. In 1991, the world production of charcoal was 22.8 million cubic meters (3.8 million metric tons) as shown in Table 1. Brazil is the world`s largest charcoal producer --- 5.9 million cubic meters or one million metric tons was produced in 1991, most of which is used in steel and iron industry. African countries produced 45% of the world total amount of charcoal, where 86% of the wood-based energy is for domestic use, most of which is inefficiently used. Charcoal is produced commercially in kilns with a 25% to 30% yield by mass on a 7 to 12 day operating cycle. Until recently, the highest yield of good quality charcoal reported in the literature was 38%. In this paper, and ASME code rated experimental system is presented for producing charcoal and activated carbon from biomass.

  2. Fluorine gettering by activated charcoal in a radiation environment

    SciTech Connect

    Felker, L.K.; Toth, L.M.

    1988-10-01

    Activated charcoal has been shown to be an effective gettering agent for the fluorine gas that is liberated in a radiation environment. Even though activated charcoal is a commonly used getter, little is known about the radiation stability of the fluorine-charcoal product. This work has shown that not only is the product stable in high gamma radiation fields, but also that radiation enhances the capacity of the charcoal for the fluorine. The most useful application of this work is with the Molten Salt Reactor Experiment (MSRE) fuel salt because the radioactive components (fission products and actinides) cause radiolytic damage to the solid LiF-BeF/sub 2/-ZrF/sub 4/-UF/sub 4/ (64.5, 30.3, 5.0, 0.13 mol %, respectively) resulting in the liberation of fluorine gas. This work has also demonstrated that the maximum damage to the fuel salt by approx.3 /times/ 10/sup 7/ R/h gamma radiation is approximately 2%, at which point the rate of recombination of fluorine with active metal sites within the salt lattice equals the rate of fluorine generation. The enhanced reactivity of the activated charcoal and radiation stability of the product ensures that the gettered fluorine will stay sequestered in the charcoal.

  3. Relative efficacy and palatability of three activated charcoal mixtures.

    PubMed

    Navarro, R P; Navarro, K R; Krenzelok, E P

    1980-02-01

    The addition of bentonite with or without chocolate syrup improved the palatability of activated charcoal preparations. Furthermore, bentonite did not significantly reduce the efficacy of charcoal to absorb aspirin. Chocolate syrup reduced the adsorption effectiveness significantly. The mixtures have a reduced shelf-life when premixed with water. However, the dry ingredients can be pre-weighed and sealed in a large jar. Water can be added just prior to administration. PMID:7361450

  4. The effect of weathering on charcoal filter performance. 2; The effect of contaminants on the CH sub 3 I removal efficiency of TEDA charcoal

    SciTech Connect

    Wren, J.C.; Moore, C.J. )

    1991-05-01

    The effect of various contaminants, namely NO{sub 2} SO{sub 2}, 2-butanone (methyl-ethyl-ketone (MEK)), and NH{sub 3}, on the radioiodine removal efficiency of triethylenediamine (TEDA)-impregnated charcoal filters has been studied, and an attempt was made to characterize and quantify the weathering process of TEDA charcoal by these contaminants. The effects of the contaminants on the CH{sub 3}I removal efficiency of TEDA charcoal under dry and humid conditions are described. Based on our results, the efficiency of TEDA charcoal is degraded most by NO{sub 2} and SO{sub 2}, NH{sub 3} has a negligible effect, and MEK produces a mild degradation. The degree of degradation parallels the contaminant's ability to be chemisorbed on the TEDA impregnant. The combined effect of water vapor and a contaminant of the charcoal efficiency is different for each contaminant. Nitrogen dioxide absorbed under dry conditions is more effective in degrading the CH{sub 2}I removal efficiency of the charcoal that when absorbed under humid conditions. On the other hand, a completely opposite result is observed for SO{sub 2}. The MEK contaminant behaves similarly to SO{sub 2} but the effect of humidity was less significant than for SO{sub 2}. Ammonia has no effect on the efficiency of the charcoal regardless of humidity.

  5. Pore structure of the activated coconut shell charcoal carbon

    NASA Astrophysics Data System (ADS)

    Budi, E.; Nasbey, H.; Yuniarti, B. D. P.; Nurmayatri, Y.; Fahdiana, J.; Budi, A. S.

    2014-09-01

    The development of activated carbon from coconut shell charcoal has been investigated by using physical method to determine the influence of activation parameters in term of temperature, argon gas pressure and time period on the pore structure of the activated carbon. The coconut shell charcoal was produced by pyrolisis process at temperature of about 75 - 150 °C for 6 hours. The charcoal was activated at various temperature (532, 700 and 868 °C), argon gas pressure (6.59, 15 and 23.4 kgf/cm2) and time period of (10, 60 and 120 minutes). The results showed that the pores size were reduced and distributed uniformly as the activation parameters are increased.

  6. The role of activated charcoal in plant tissue culture.

    PubMed

    Thomas, T Dennis

    2008-01-01

    Activated charcoal has a very fine network of pores with large inner surface area on which many substances can be adsorbed. Activated charcoal is often used in tissue culture to improve cell growth and development. It plays a critical role in micropropagation, orchid seed germination, somatic embryogenesis, anther culture, synthetic seed production, protoplast culture, rooting, stem elongation, bulb formation etc. The promotary effects of AC on morphogenesis may be mainly due to its irreversible adsorption of inhibitory compounds in the culture medium and substancially decreasing the toxic metabolites, phenolic exudation and brown exudate accumulation. In addition to this activated charcoal is involved in a number of stimulatory and inhibitory activities including the release of substances naturally present in AC which promote growth, alteration and darkening of culture media, and adsorption of vitamins, metal ions and plant growth regulators, including abscisic acid and gaseous ethylene. The effect of AC on growth regulator uptake is still unclear but some workers believe that AC may gradually release certain adsorbed products, such as nutrients and growth regulators which become available to plants. This review focuses on the various roles of activated charcoal in plant tissue culture and the recent developments in this area. PMID:18786626

  7. Activated charcoal. (Latest citations from the Compendex database). Published Search

    SciTech Connect

    Not Available

    1993-06-01

    The bibliography contains citations concerning theoretical aspects and industrial applications of activated charcoal. Topics include adsorption capacity and mechanism studies, kinetic and thermodynamic aspects, and description and evaluation of adsorptive abilities. Applications include use in water analyses and waste treatment, air pollution control and measurement, and in nuclear facilities. (Contains a minimum of 151 citations and includes a subject term index and title list.)

  8. Application of activated charcoal in the downstream processing of bacterial olefinic poly(3-hydroxyalkanoates).

    PubMed

    Wampfler, Bruno; Ramsauer, Thomas; Kehl, Karl; Zinn, Manfred; Thöny-Meyer, Linda

    2010-01-01

    Medium chain length poly(hydroxyalkanoates) (mcl-PHAs) are bacterial thermoplastic elastomers with a large potential in medical applications. The present study provides a novel process to isolate and purify poly([R]-3-hydroxy-omega-undecenoate-co-3-hydroxy-omega-nonenoate-co-3-hydroxy-omega-heptenoate) (PHUE) and poly([R]-3-hydroxy-omega-undecenoate-co-3-hydroxy-omega-nonenoate-co-3-hydroxyoctanoate-co-3-hydroxy-omega-heptenoate-co-3-hydroxyhexanoate) (PHOUE) from Pseudomonas putida species. Three different types of activated charcoal were compared with regard to their capability to selectively remove impurities. The product 'Charcoal activated, powder, pure' from Merck was found to be most suitable. Using ethyl acetate as solvent, the polyesters were extracted from freeze-dried biomass at room temperature and simultaneously purified by addition of activated charcoal at the beginning of the extraction. The period of extraction was one hour and the ratio solvent to biomass was 15:1 (vol/wt). After extraction, the solids were separated by pressure filtration through a metallic lace tissue. The filtrate was again passed through the previously accumulated filter cake, followed by a second filtration through a 0.45 microm membrane to remove finest coal particles. The resulting filtrate was concentrated, thus yielding polyesters whose quality and yield depended on the quantity of activated charcoal applied. For highly pure PHUE and PHOUE with low endotoxin levels, the optimum ratio of activated charcoal to solvent for extraction (V/V) was found to be 0.5 for PHUE and 0.25 for PHOUE. The yields with regard to the raw polymers amounted to 55 wt% for PHUE and 75 wt% for PHOUE, which are acceptable for polymers that can be used for medical applications. PMID:21197841

  9. Active-R filter

    DOEpatents

    Soderstrand, Michael A.

    1976-01-01

    An operational amplifier-type active filter in which the only capacitor in the circuit is the compensating capacitance of the operational amplifiers, the various feedback and coupling elements being essentially solely resistive.

  10. Microbial Contamination of Ice Machines Is Mediated by Activated Charcoal Filtration Systems in a City Hospital.

    PubMed

    Yorioka, Katsuhiro; Oie, Shigeharu; Hayashi, Koji; Kimoto, Hiroo; Furukawa, Hiroyuki

    2016-06-01

    Although microbial contamination of ice machines has been reported, no previous study has addressed microbial contamination of ice produced by machines equipped with activated charcoal (AC) filters in hospitals. The aim of this study was to provide clinical data for evaluating AC filters to prevent microbial contamination of ice. We compared microbial contamination in ice samples produced by machines with (n = 20) and without an AC filter (n = 40) in Shunan City Shinnanyo Municipal Hospital. All samples from the ice machine equipped with an AC filter contained 10-116 CFUs/g of glucose nonfermenting gram-negative bacteria such as Pseudomonas aeruginosa and Chryseobacterium meningosepticum. No microorganisms were detected in samples from ice machines without AC filters. After the AC filter was removed from the ice machine that tested positive for Gram-negative bacteria, the ice was resampled (n = 20). Analysis found no contaminants. Ice machines equipped with AC filters pose a serious risk factor for ice contamination. New filter-use guidelines and regulations on bacterial detection limits to prevent contamination of ice in healthcare facilities are necessary. PMID:27348980

  11. Comparison of Impurities in Charcoal Sorbents Found by Neutron Activation Analysis

    SciTech Connect

    Doll, Charles G.; Finn, Erin C.; Cantaloub, Michael G.; Greenwood, Lawrence R.; Kephart, Jeremy; Kephart, Rosara F.

    2013-01-01

    Abstract: Neutron activation of gas samples in a reactor often requires a medium to retain sufficient amounts of the gas for analysis. Charcoal is commonly used to adsorb gas and hold it for activation; however, the amount of activated sodium in the charcoal after irradiation swamps most signals of interest. Neutron activation analysis (NAA) was performed on several commonly available charcoal samples in an effort to determine the activation background. The results for several elements, including the dominant sodium element, are reported. It was found that ECN charcoal had the lowest elemental background, containing sodium at 2.65 ± 0.05 ppm, as well as trace levels of copper and tungsten.

  12. Some Investigations of the Reaction of Activated Charcoal with Fluorine and Uranium Hexafluoride

    SciTech Connect

    Del Cul, G.D.; Fiedor, J.N.; Simmons, D.W.; Toth, L.M.; Trowbridge, L.D.; Williams

    1998-09-01

    The Molten Salt Reactor Experiment (MSRE) at Oak Ridge National Laboratory has been shut down since 1969, when the fuel salt was drained from the core into two Hastelloy N drain tanks at the reactor site. Over time, fluorine (F{sub 2}) and uranium hexafluoride (UF{sub 6}) moved from the salt through the gas piping to a charcoal bed, where they reacted with the activated charcoal. Some of the immediate concerns related to the migration of F{sub 2} and UF{sub 6} to the charcoal bed were the possibility of explosive reactions between the charcoal and F{sub 2}, the existence of conditions that could induce a criticality accident, and the removal and recovery of the fissile uranium from the charcoal. This report addresses the reactions and reactivity of species produced by the reaction of fluorine and activated charcoal and between charcoal and F{sub 2}-UF{sub 6} gas mixtures in order to support remediation of the MSRE auxiliary charcoal bed (ACB) and the recovery of the fissile uranium. The chemical identity, stoichiometry, thermochemistry, and potential for explosive decomposition of the primary reaction product, fluorinated charcoal, was determined.

  13. Multiple-dose activated charcoal in acute self-poisoning: a randomised controlled trial

    PubMed Central

    Eddleston, Michael; Juszczak, Edmund; Buckley, Nick A; Senarathna, Lalith; Mohamed, Fahim; Dissanayake, Wasantha; Hittarage, Ariyasena; Azher, Shifa; Jeganathan, K; Jayamanne, Shaluka; Sheriff, MH Rezvi; Warrell, David A

    2008-01-01

    Summary Background The case-fatality for intentional self-poisoning in the rural developing world is 10–50-fold higher than that in industrialised countries, mostly because of the use of highly toxic pesticides and plants. We therefore aimed to assess whether routine treatment with multiple-dose activated charcoal, to interrupt enterovascular or enterohepatic circulations, offers benefit compared with no charcoal in such an environment. Methods We did an open-label, parallel group, randomised, controlled trial of six 50 g doses of activated charcoal at 4-h intervals versus no charcoal versus one 50 g dose of activated charcoal in three Sri Lankan hospitals. 4632 patients were randomised to receive no charcoal (n=1554), one dose of charcoal (n=1545), or six doses of charcoal (n=1533); outcomes were available for 4629 patients. 2338 (51%) individuals had ingested pesticides, whereas 1647 (36%) had ingested yellow oleander (Thevetia peruviana) seeds. Mortality was the primary outcome measure. Analysis was by intention to treat. The trial is registered with controlled-trials.com as ISRCTN02920054. Findings Mortality did not differ between the groups. 97 (6·3%) of 1531 participants in the multiple-dose group died, compared with 105 (6·8%) of 1554 in the no charcoal group (adjusted odds ratio 0·96, 95% CI 0·70–1·33). No differences were noted for patients who took particular poisons, were severely ill on admission, or who presented early. Interpretation We cannot recommend the routine use of multiple-dose activated charcoal in rural Asia Pacific; although further studies of early charcoal administration might be useful, effective affordable treatments are urgently needed. PMID:18280328

  14. Efficacy of activated charcoal and magnesium citrate in the treatment of oral paraquat intoxication.

    PubMed

    Gaudreault, P; Friedman, P A; Lovejoy, F H

    1985-02-01

    The binding capacity of activated charcoal for paraquat was evaluated in vitro and in vivo and compared with Fuller's earth. In vitro activated charcoal absorbs paraquat and is as effective as Fuller's earth. Activated charcoal's absorbing capacity for paraquat is increased when it is suspended in magnesium citrate and is maximal at pH 7.8. Paraquat (200 mg/kg) administered orally to male mice, followed 30 minutes later by activated charcoal, Fuller's earth (4 gm/kg), and magnesium citrate (0.01 cc/gm) resulted in a survival rate of 31% in the controls, 63% in the activated charcoal and Fuller's earth groups, and 69% in the magnesium citrate group (P values not significant). When activated charcoal was administered concomitantly with magnesium citrate, the survival rate was improved significantly to 94% (P less than 0.01). The efficacy and greater availability of activated charcoal and magnesium citrate make these materials the treatment of choice for gastrointestinal decontamination in oral paraquat poisoning. PMID:3970396

  15. Charcoal produced by prescribed fire increases dissolved organic carbon and soil microbial activity

    NASA Astrophysics Data System (ADS)

    Poon, Cheryl; Jenkins, Meaghan; Bell, Tina; Adams, Mark

    2014-05-01

    In Australian forests fire is an important driver of carbon (C) storage. When biomass C is combusted it is transformed into vegetation residue (charcoal) and deposited in varying amounts and forms onto soil surfaces. The C content of charcoal is high but is largely in a chemically stable form of C, which is highly resistance to microbial decomposition. We conducted two laboratory incubations to examine the influence of charcoal on soil microbial activity as indicated by microbial respiration. Seven sites were chosen in mixed species eucalypt forest in Victoria, Australia. Soil was sampled prior to burning to minimise the effects of heating or addition of charcoal during the prescribed burn. Charcoal samples were collected from each site after the burn, homogenised and divided into two size fractions. Prior to incubation, soils were amended with the two size fractions (<1 and 1-4.75 mm) and at two rates of amount (2.5 and 5% by soil dry weight). Charcoal-amended soils were incubated in the laboratory for 86 d, microbial respiration was measured nine times at day 1, 3, 8, 15, 23, 30, 45, 59 and 86 d. We found that addition of charcoal resulted in faster rates of microbial respiration compared to unamended soil. Fastest rates of microbial respiration in all four treatments were measured 1 d after addition of charcoal (up to 12 times greater than unamended soil). From 3 to 8 d, respiration rates in all four treatments decreased and only treatments with greater charcoal addition (5%) remained significantly faster than unamended soil. From 15 d to 86 d, all treatments had respiration rates similar to unamended soil. Overall, adding greater amount of charcoal (5%) resulted in a larger cumulative amount of CO2 released over the incubation period when compared to unamended soil. The second laboratory incubation focused on the initial changes in soil nutrient and microbial respiration after addition of charcoal over a 72 h period. Charcoal (<2 mm) was added at rate of 5% to

  16. Comparison of activated charcoal and ipecac syrup in prevention of drug absorption.

    PubMed

    Neuvonen, P J; Vartiainen, M; Tokola, O

    1983-01-01

    The efficacy of activated charcoal and ipecac syrup in the prevention of drug absorption was studied in 6 healthy adult volunteers, using a randomized, cross-over design. Paracetamol 1000 mg, tetracycline 500 mg and aminophylline 350 mg were ingested on an empty stomach with 100 ml water. Then, after 5 or 30 min, the subjects ingested, either activated charcoal suspension (50 g charcoal), syrup of ipecac, or, only after 5 min, water 300 ml. Activated charcoal, given either after 5 or 30 min, significantly (p less than 0.01 or less 0.05) reduced the absorption of these 3 drugs measured, for example as AUC0-24 h. Syrup of ipecac caused emesis on each occasion, with a mean delay of 15 min. When ipecac was given 5 min after the drugs, its effect on absorption was significant, but when it was given after 30 min only the absorption of tetracycline was reduced. Activated charcoal was significantly (p less than 0.05) more effective than ipecac in reducing drug absorption when given at the same time points. In cases of acute intoxication, depending on the quality and quantity of the drugs ingested, the relative efficacy of charcoal and ipecac may be somewhat different from that observed in the present study. Despite its emetic action, however, ipecac syrup is not very effective in preventing drug absorption and, in general, activated charcoal should also be given after induced emesis or gastric lavage. PMID:6134626

  17. Activated charcoal-carboxymethylcellulose gel formulation as an antidotal agent for orally ingested aspirin.

    PubMed

    Mathur, L K; Jaffe, J M; Colaizzi, J L; Moriarty, R W

    1976-07-01

    The in vivo effect on aspirin absorption of a potentially more palatable form of activated charcoal was compared to that of a simple aqueous slurry of activated charcoal. The experimental formulation consisted of 20.0 g of activated charcoal, 2.25 g of carboxymethylcellulose (CMC) and 42.8 ml of water; it was tested with and without chocolate syrup as a flavoring agent added just prior to administration. Six subjects were treated in crossover fashion following an aspirin dose of 972 mg. Total urinary excretion of salicylate was measured over 48 hours. Although all three treatments appeared to be effective in reducing the rate and extent of aspirin absorption, the slurry was significantly more effective in reducing the total amount absorbed than the charcoal-CMC gel with chocolate syrup. The slight difference in effectiveness between the gel formulation with and without the chocolate syrup was not significant. PMID:941924

  18. Using Macroscopic Charcoal to Reconstruct the Holocene Fire Activity of the Willamette Valley, Oregon and Washington

    NASA Astrophysics Data System (ADS)

    Walsh, M. K.; Whitlock, C.; Bartlein, P. J.; Pearl, C. A.

    2006-12-01

    High-resolution macroscopic charcoal analysis of two lacustrine records has revealed the Holocene fire activity of the Willamette Valley, located between the Coast and Cascade ranges of southwestern Washington and northwestern Oregon. The Willamette Valley experienced major environmental and cultural changes during the Holocene, however, its long-term fire history is poorly known. Of particular interest are shifts in fire activity that occurred in response to (1) millennial- and centennial-scale climate and vegetation changes (e.g., the Early Holocene warm period, the Little Ice Age) and (2) major shifts in human activity and population size (e.g., Native American population decline, Euro-American settlement). Macroscopic charcoal analysis of contiguous core samples was used to reconstruct fire activity at each site. Charcoal source (i.e., herbaceous or woody) was also determined based on particle morphology. Charcoal influx was decomposed into a peak component (which indicates fire episodes) and a background component (which indicates changes in burnable biomass). Charcoal records from Battle Ground Lake and Beaver Lake reveal major shifts in fire activity that are consistent with known changes in regional climate on orbital time scales. The Battle Ground Lake charcoal data, for example, show a general increase in fire frequency from the beginning of the Holocene to a maximum of ~18 fire episodes/1000 years at 6500 cal yr BP, associated with the early Holocene insolation maximum and its influence on summer drought, followed by a decrease to ~5 fire episodes/1000 years at present. Similar trends are indicated by the Beaver Lake charcoal data. Both records also indicate shifts in fire activity that suggest the possibility of anthropogenic burning, but at different times at each site. Additional records are being analyzed to examine the spatial and temporal patterns of fire activity across the Willamette Valley as a whole.

  19. Active rejector filter

    SciTech Connect

    Kuchinskii, A.G.; Pirogov, S.G.; Savchenko, V.M.; Yakushev, A.K.

    1985-01-01

    This paper describes an active rejector filter for suppressing noise signals in the frequency range 50-100 Hz and for extracting a vlf information signal. The filter has the following characteristics: a high input impedance, a resonant frequency of 75 Hz, a Q of 1.25, and an attenuation factor of 53 dB at resonant frequency.

  20. Somatic proembryo production from excised, wounded zygotic carrot embryos on hormone-free medium: evaluation of the effects of pH, ethylene and activated charcoal

    NASA Technical Reports Server (NTRS)

    Smith, D. L.; Krikorian, A. D.

    1990-01-01

    Wounded zygotic embryos of cultivated carrot produce somatic proembryos on hormone-free nutrient medium containing 1 mM NH4+ as the sole nitrogen source. Continued maintenance of proembryos on this medium leads to a "pure" culture of preglobular stage proembryos (PGSPs). Ethylene had no effect on this process. Also, somatic embryo production was not affected by growing cultures on activated charcoal-impregnated filter papers. However, somatic proembyros initiated on activated charcoal papers were not maintainable as PGSPs and developed into later embryo stages. Normally, medium pH dropped from 5.7 to 4 during each subculture period, but when using activated charcoal papers the pH endpoint was around 6 - 7 due to a leachable substance(s) within the filter papers. When powdered, activated charcoal was used in the medium as an adsorbent of products potentially released after wounding, pH dropped at the normal rate and to the expected levels; proembryos did not mature into later embryo stages and were maintainable exclusively as PGSPs. Low pH (approximately 4) is detrimental to proembyro production, but is essential to maintaining PGSPs on hormone-free nutrient medium, whereas a sustained pH > or = 5.7 allows continued development of PGSPs into later embryo stages.

  1. In vitro analysis of the effect of supplementation with activated charcoal on the equine hindgut

    PubMed Central

    EDMUNDS, J.L.; WORGAN, H.J.; DOUGAL, K.; GIRDWOOD, S.E.; DOUGLAS, J.-L.; MCEWAN, N.R.

    2016-01-01

    ABSTRACT The present study uses in vitro analytical techniques to investigate the effect of activated charcoal on the microbial community of the equine hindgut and the metabolites they produce. Incubations were performed in Wheaton bottles using a 50 ml incubation of a high-energy feed or a low-energy feed, plus bottles with no added food source, together with five levels of activated charcoal (0, 10, 25, 50 or 100 mg per bottle) and fecal samples as a bacterial inoculum. Using this method the rate of gas production, volatile fatty acid and ammonia concentrations, and pH values were analyzed and found to vary depending on the addition of feed, but the activated charcoal had no effect (P>0.05) on any of these. It is already believed that the effect of activated charcoal as a control for toxic substances is at its highest in the foregut or midgut of animals, and therefore should have little impact on the hindgut. The data presented here suggest that if any of the activated charcoal does reach the hindgut, then it has no significant impact on the microbial community present, nor on the major metabolites produced, and so should not have a detrimental effect on the principal site of fermentation in the horse. PMID:27330398

  2. In vitro analysis of the effect of supplementation with activated charcoal on the equine hindgut.

    PubMed

    Edmunds, J L; Worgan, H J; Dougal, K; Girdwood, S E; Douglas, J-L; McEwan, N R

    2016-01-01

    The present study uses in vitro analytical techniques to investigate the effect of activated charcoal on the microbial community of the equine hindgut and the metabolites they produce. Incubations were performed in Wheaton bottles using a 50 ml incubation of a high-energy feed or a low-energy feed, plus bottles with no added food source, together with five levels of activated charcoal (0, 10, 25, 50 or 100 mg per bottle) and fecal samples as a bacterial inoculum. Using this method the rate of gas production, volatile fatty acid and ammonia concentrations, and pH values were analyzed and found to vary depending on the addition of feed, but the activated charcoal had no effect (P>0.05) on any of these. It is already believed that the effect of activated charcoal as a control for toxic substances is at its highest in the foregut or midgut of animals, and therefore should have little impact on the hindgut. The data presented here suggest that if any of the activated charcoal does reach the hindgut, then it has no significant impact on the microbial community present, nor on the major metabolites produced, and so should not have a detrimental effect on the principal site of fermentation in the horse. PMID:27330398

  3. Contribution of sorbitol combined with activated charcoal in prevention of salicylate absorption.

    PubMed

    Keller, R E; Schwab, R A; Krenzelok, E P

    1990-06-01

    The use of cathartics and activated charcoal in treating toxic ingestions has become a standard treatment modality. Sorbitol has been shown to be the most rapidly acting cathartic, but its therapeutic significance has been debated. Using a previously described aspirin overdose model, ten healthy volunteers participated in a crossover design study that investigated the effect of activated charcoal alone versus that of activated charcoal and sorbitol in preventing salicylate absorption. In phase 1 of the study, subjects consumed 2.5 g aspirin followed by 25 g activated charcoal one hour later. Urine was collected for 48 hours and analyzed for quantitative salicylate metabolites. Phase 2 was identical except that 1.5 g/kg sorbitol was consumed with the activated charcoal. The mean amount of aspirin absorbed without the use of sorbitol was 1.26 +/- 0.15 g, whereas the mean absorption was 0.912 +/- 0.18 g with the addition of sorbitol. This is a 28% decrease in absorption of salicylates attributable to the use of sorbitol. The difference is significant at P less than .05 by the paired Student's t test. This study demonstrates that the addition of sorbitol significantly decreases drug absorption in a simulated drug overdose model. Effects on absorption in actual overdose situations and on patient outcome should be the subjects of further study. PMID:2188536

  4. Activated charcoal is as effective as fuller's earth or bentonite in paraquat poisoning.

    PubMed

    Okonek, S; Setyadharma, H; Borchert, A; Krienke, E G

    1982-02-15

    In vitro investigations have shown that the adsorption capacity of activated charcoal ('Kohle-Compretten', 'Ultracarbon', E. Merck, Darmstadt, FRG) is just as high as that of 'Fuller's earth' (Surrey powder, Laporte Industries Ltd., Luton, GB) or 'Bentonite BP W.B. (Steetley Minerals Ltd., Milton Keynes, GB). Fuller's earth ('Fullererde') from another manufacturer has had very poor adsorption properties and is thus not suitable for the treatment of paraquat poisoning. Animal experiments have shown that the curative effect of activated charcoal given 0.5, 1, 2, and 3 h after ingestion of 200 and 300 mg paraquat/kg body weight is equally as good or even better than that of 'Fuller's earth' or 'Bentonite BP W.B' Activated charcoal is a substitute of equal value to these mineral soils. PMID:7070010

  5. Molecular and structural properties of polymer composites filled with activated charcoal particles

    NASA Astrophysics Data System (ADS)

    Tahir, Dahlang; Liong, Syarifuddin; Bakri, Fahrul

    2016-03-01

    We have studied the molecular properties, structural properties, and chemical composition of composites by Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD) spectroscopy, and X-ray fluorescence (XRF) spectroscopy, respectively. FTIR spectra shows absorption band of hydroxyl group (-OH), methyl group (-CH3) and aromatic group (C-C). The absorption band for aromatic group (C-C) shows the formation of carbonaceous in composites. XRF shows chemical composition of composites, which the main chemicals are SO3, Cl, and ZnO. The loss on ignition value (LOI) of activated charcoal indicates high carbonaceous matter. The crystallite size for diffraction pattern from hydrogel polymer is about 17 nm and for activated charcoal are about 19 nm. The crystallite size of the polymer is lower than that of activated charcoal, which make possible of the particle from filler in contact with each other to form continuous conducting polymer through polymer matrix.

  6. Successful treatment of paraquat poisoning: activated charcoal per os and "continuous hemoperfusion".

    PubMed

    Okonek, S; Weilemann, L S; Majdandzic, J; Setyadharma, H; Reinecke, H J; Baldamus, C A; Lohmann, J; Bonzel, K E; Thon, T

    1982-10-01

    Ingestion of paraquat results in an extremely dangerous poisoning. The first aim is to clear the gastrointestinal tract by inducing emesis and performing gastric/gut lavage; as much activated charcoal as possible should be administered per os and as quickly as possible. The best measure to eliminate paraquat from blood and tissue is hemoperfusion with coated activated charcoal; it has to be performed in the sense of "continuous hemoperfusion" about 8 h/d over a period of 2-3 weeks. These measures give a chance to lower the lethality of paraquat poisoning. PMID:7182509

  7. Optimization studies on the features of an activated charcoal-supported urease system.

    PubMed

    Kibarer, G D; Akovali, G

    1996-08-01

    The adsorption of urease onto a well-defined solid support, petroleum-based activated charcoal, has been achieved to provide the enzymatic hydrolysis of urea. In order to produce a biocompatible surface, the enzyme support system has been coated with hexamethyldisiloxane through plasma polymerization. The quality of the resulting coat was tested by electronic spectroscopy for chemical analysis and scanning electron microscopy techniques. Studies on the adsorption of urease, and activity and stability of the enzyme on the support have been in the direction to optimize the features of the charcoal-supported urease and improve its availability for further use in clinical applications. PMID:8853117

  8. Preparation and performance of chitosan encapsulated activated charcoal (ACCB) adsorbents for small molecules.

    PubMed

    Chandy, T; Sharma, C P

    1993-01-01

    A technique is described to encapsulate activated charcoal for haemoperfusion to be used in an artificial liver support. Activated charcoal was encapsulated within chitosan matrix (ACCB) in different concentrations, and was used as the supports for perfusion of a mixture of solutes, having molecular weight ranges from 60 to 69,000; under a flow rate of 8 ml/min. It seems the ACCB may be a good adsorbent system for the removal of toxic uric acid, creatinine, bilirubin, etc., from solutions; while larger molecules such as albumin are adsorbed less. The encapsulated charcoal did not leach out from the matrix during perfusion, and the system may be useful for detoxification of blood. The haemolytic potential of ACCB has been compatible with polystyrene control tubes. However, further studies are needed to determine their behaviour under clinical conditions. PMID:8263676

  9. Effect of supplementing activated charcoal on the intake of honey mesquite leaves by lambs

    Technology Transfer Automated Retrieval System (TEKTRAN)

    A study was conducted to determine if intake of honey mesquite (Prosopis glandulosa Torr.) leaves by sheep could be increased by supplementing activated charcoal at 0.0, 0.33, 0.67 or 1.00 g / kg of body weight. Twenty wether lambs (36.6 ± 0.6 kg) were randomly assigned to the 4 treatment levels. La...

  10. Effect of supplementing activated charcoal on the intake of honey mesquite leaves by lambs

    Technology Transfer Automated Retrieval System (TEKTRAN)

    A study was conducted to determine if intake of honey mesquite (Prosopis glandulosa Torr.) leaves by sheep could be increased by supplementing four levels of activated charcoal supplemental (0.0, 0.33, 0.67 and 1.00 g/kg of BW). Twenty wether lambs (36.6 ± 0.6 kg) were randomly assigned to the 4 tre...

  11. Effect of thermal treatments on the properties of nickel and cobalt activated-charcoal-supported catalysts

    SciTech Connect

    Gandia, L.M.; Montes, M. )

    1994-02-01

    The effect of thermal pretreatment in N[sub 2] up to 723 K and the activation treatments in H[sub 2] and an inert atmosphere on the properties of Ni and Co activated-charcoal-supported catalysts were studied. Catalysts were characterized by means of N[sub 2] adsorption at 77 K, H[sub 2] chemisorption at room temperature, thermogravimetric analysis (TGA), X-ray diffraction (XRD), and transmission electron microscopy (TEM). The catalysts' activity and selectivity for acetone hydrogenation to 2-propanol under unusual and severe conditions (473 K and high overall acetone conversion) were also measured. TGA and XRD evidence was found for the charcoal-support-promoted NiO and CoO reduction to the metallic states when the catalysts were subjected to an inert atmosphere above 723 K caused a loss of acetone hydrogenation activity (calculated on a metal load basis) for both the Ni and Co activated-charcoal-supported catalysts, with respect to that of the low-temperature (573 K) activation treatments. In a series of activated-charcoal-supported Ni catalysts, a large decrease in the H[sub 2] chemisorption uptake was also found for a sample pretreated in N[sub 2] at 723 K prior to H[sub 2] reduction. These results were not due to nickel or cobalt sintering, as shown by XRD line broadening measurements. The catalytic activity loss was accompanied by a decrease (in the case of Ni) and an increase (in the case of Co) in the 2-propanol selectivity. 44 refs., 13 figs., 3 tabs.

  12. Effect of electric current frequency on the activation kinetics of raw charcoal

    SciTech Connect

    Shevchenko, A.O.; Ivakhnyuk, G.K.; Fedorov, N.F.

    1993-12-10

    The effect of electric current frequency on the kinetics of raw charcoal activation with water vapor has been investigated. It was established that under the effect of alternating current the rate constant increases under otherwise equal conditions. A dependence of the reaction rate on the current frequency was found. It was discovered that under the effect of alternating current the activation energy of interaction with water vapor diminishes.

  13. Fructo-oligosaccharides purification from a fermentative broth using an activated charcoal column.

    PubMed

    Nobre, C; Teixeira, J A; Rodrigues, L R

    2012-02-15

    In this study, a simple and efficient process to purify fructo-oligosaccharides (FOS) from a fermentative broth was proposed using a single activated charcoal column. The FOS adsorption onto the activated charcoal was modeled by a pseudo-second order model. Several volumes and concentrations of water/ethanol were studied to optimize the selective desorption of sugars from the broth mixture at 25°C. Mixtures containing 50.6% (w/w) of FOS (FOS content in the fermentative broth) were purified to 92.9% (w/w) with a FOS recovery of 74.5% (w/w). Moreover, with the proposed process, fractions with purity up to 97% (w/w) of FOS were obtained. This purification process was also found to be efficient in the desalting of the fermentative broth. PMID:22100432

  14. Spacelab Charcoal Analyses

    NASA Technical Reports Server (NTRS)

    Slivon, L. E.; Hernon-Kenny, L. A.; Katona, V. R.; Dejarme, L. E.

    1995-01-01

    This report describes analytical methods and results obtained from chemical analysis of 31 charcoal samples in five sets. Each set was obtained from a single scrubber used to filter ambient air on board a Spacelab mission. Analysis of the charcoal samples was conducted by thermal desorption followed by gas chromatography/mass spectrometry (GC/MS). All samples were analyzed using identical methods. The method used for these analyses was able to detect compounds independent of their polarity or volatility. In addition to the charcoal samples, analyses of three Environmental Control and Life Support System (ECLSS) water samples were conducted specifically for trimethylamine.

  15. Intake of honey mesquite (Prosopis glandulosa) leaves by lambs using different levels of activated charcoal

    Technology Transfer Automated Retrieval System (TEKTRAN)

    A 24-day feeding trial was conducted to assess the effect of feeding four levels of activated charcoal (0.0, 0.33, 0.67 and 1.00 g/kg of body weight) on intake of honey mesquite leaves (Prosopis glandulosa Torr.) by 20 wether lambs (36.6 ± 0.6 kg) that were randomly assigned to treatments. Lambs wer...

  16. Activated Charcoal Does Not Reduce Duration of Phenytoin Toxicity in Hospitalized Patients.

    PubMed

    Cumpston, Kirk; Stromberg, Paul; Wills, Brandon K; Rose, S Rutherfoord

    2016-01-01

    Phenytoin toxicity frequently results in a prolonged inpatient admission. Several publications avow multidose activated charcoal (MDAC) will enhance the elimination of phenytoin. However, these claims are not consistent, and the mechanism of enhanced eliminaiton is unproven. The aim of this investigation is to compare the time to reach a clinical composite end point in phenytoin overdose patients treated with no activated charcoal (NoAC), single-dose activated charcoal (SDAC), and MDAC. This was a retrospective study using electronic poison center data. Patients treated in a health care facility with phenytoin concentrations >20 mg/L were included. Patients were grouped by use of SDAC, MDAC, and NoAC. The primary end points were either time to resolution of symptoms, hospital discharge, or the case was closed by a toxicologist. After applying inclusion and exclusion criteria, 132 cases were included for analysis. There were 88 NoAC, 13 SDAC, and 31 MDAC cases. The groups were similar in symptomatology, age, and chronicity of expsoure. Mean peak phenytoin concentrations (SD) were 42 mg/L (12), 41 mg/L (11), and 42 mg/L (11) for NoAC, SDAC, and MDAC, respectively. Mean time to reach the study end point was 39 hours [95% confidence interval (CI), 31-48], 52 hours (95% CI, 36-68), and 60 hours (95% CI, 45-75) for NoAC, SDAC, and MDAC, respectively. The groups appeared similar with respect to peak phenytoin concentrations and prevalence of signs and symptoms. In this observational series, the use of activated charcoal was associated with increased time to reach the composite end point of clinical improvement. PMID:24621645

  17. Adsorption of H2, Ne, and N2 on Activated Charcoal

    NASA Technical Reports Server (NTRS)

    Chang, C. K.; Tward, E.; Boudaie, K. I.

    1986-01-01

    9-page report presents measured adsorption isotherms of hydrogen, neon, and nitrogen on activated charcoal for temperatures from 77 to 400 K and pressures from 1 to 80 atmospheres (0.1 to 8.1 MPa). Heats of adsorption calculated from isotherms also presented. Report gives expressions, based on ideal-gas law, which show relationship between different definitions of volume of gas adsorbed and used in describing low-pressure isotherms.

  18. Research report: Charcoal type used for hookah smoking influences CO production.

    PubMed

    Medford, Marlon A; Gasier, Heath G; Hexdall, Eric; Moffat, Andrew D; Freiberger, John J; Moon, Richard E

    2015-01-01

    A hookah smoker who was treated for severe carbon monoxide poisoning with hyperbaric oxygen reported using a different type of charcoal prior to hospital admission, i.e., quick-light charcoal. This finding led to a study aimed at determining whether CO production differs between charcoals commonly used for hookah smoking, natural and quick-light. Our hypothesis was that quick-light charcoal produces significantly more CO than natural charcoal. A medium-sized hookah, activated charcoal filter, calibrated syringe, CO gas analyzer and infrared thermometer were assembled in series. A single 9-10 g briquette of either natural or quick-light charcoal was placed atop the hookah bowl and ignited. CO output (ppm) and temperature (degrees C) were measured in three-minute intervals over 90 minutes. The mean CO levels produced by quick-light charcoal over 90 minutes was significantly higher (3728 ± 2028) compared to natural charcoal (1730 ± 501 ppm, p = 0.016). However, the temperature was significantly greater when burning natural charcoal (292 ± 87) compared to quick-light charcoal (247 ± 92 degrees C, p = 0.013). The high levels of CO produced when using quick-light charcoals may be contributing to the increase in reported hospital admissions for severe CO poisoning. PMID:26403022

  19. Practical Active Capacitor Filter

    NASA Technical Reports Server (NTRS)

    Shuler, Robert L., Jr. (Inventor)

    2005-01-01

    A method and apparatus is described that filters an electrical signal. The filtering uses a capacitor multiplier circuit where the capacitor multiplier circuit uses at least one amplifier circuit and at least one capacitor. A filtered electrical signal results from a direct connection from an output of the at least one amplifier circuit.

  20. Aminocyclopyrachlor sorption in biochar and activated charcoal amended soils

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Aminocyclopyrachlor is a new herbicide active ingredient, classified as a member of the new chemical class “pyrimidine carboxylic acids”. It is used for control of broadleaf weeds and brush on non-cropland. Due to its potential mobility in some soils, there is interest in whether aminocyclopyrachlor...

  1. Charcoal bed operation for optimal organic carbon removal

    SciTech Connect

    Merritt, C.M.; Scala, F.R.

    1995-05-01

    Historically, evaporation, reverse osmosis or charcoal-demineralizer systems have been used to remove impurities in liquid radwaste processing systems. At Nine Mile point, we recently replaced our evaporators with charcoal-demineralizer systems to purify floor drain water. A comparison of the evaporator to the charcoal-demineralizer system has shown that the charcoal-demineralizer system is more effective in organic carbon removal. We also show the performance data of the Granulated Activated Charcoal (GAC) vessel as a mechanical filter. Actual data showing that frequent backflushing and controlled flow rates through the GAC vessel dramatically increases Total Organic Carbon (TOC) removal efficiency. GAC vessel dramatically increases Total Organic Carbon (TOC) removal efficiency. Recommendations are provided for operating the GAC vessel to ensure optimal performance.

  2. Binding Potency of Heparin Immobilized on Activated Charcoal for DNA Antibodies.

    PubMed

    Snezhkova, E A; Tridon, A; Evrard, B; Nikolaev, V G; Uvarov, V Yu; Tsimbalyuk, R S; Ivanuk, A A; Komov, V V; Sakhno, L A

    2016-02-01

    In vitro experiments showed that heparin adsorbed on activated charcoal can bind antibodies raised against native and single-stranded DNA in a diluted sera pool with a high level of these DNA. Thus, heparin used as anticoagulant during hemosorption procedure can demonstrate supplementary therapeutic activity resulting from its interaction with various agents involved in acute and chronic inflammatory reactions such as DNA- and RNA-binding substances, proinflammatory cytokines, complement components, growth factors, etc. Research and development of heparin-containing carbonic adsorbents for the therapy of numerous inflammatory and autoimmune diseases seems to be a promising avenue in hematology. PMID:26902353

  3. Use of Activated Charcoal for {sup 220}Rn Adsorption for Operations Associated with the Uranium Deposit in the Auxiliary Charcoal Bed at the Molten Salt Reactor Experiment Facility

    SciTech Connect

    Coleman, R.L.

    1999-03-01

    Measurements have been collected with the purpose of evaluating the effectiveness of activated charcoal for the removal of {sup 220}Rn from process off-gas at the Molten Salt Reactor Experiment (MSRE) at Oak Ridge National Laboratory. A series of bench-scale tests were performed at superficial flow velocities of 10, 18, 24, and 33 cm/s (20, 35, 47, and 65 ft/min) with a continuous input concentration of {sup 220}Rn in the range of 9 x 10{sup 3} pCi/L. In addition, two tests were performed at the MSRE facility by flowing helium through the auxiliary charcoal bed uranium deposit. These tests were performed so that the adsorptive effectiveness could be evaluated with a relatively high concentration of {sup 220}Rn. In addition to measuring the effectiveness of activated charcoal as a {sup 220}Rn adsorption media, the source term for available {sup 220}Rn in the deposit is actually available for removal and that the relative activity of fission gases is very small when compared to {sup 220}Rn. The measurement data were then used to evaluate the expected effectiveness of a proposed charcoal adsorption bed consisting of a right circular cylinder having a diameter of 43 cm and a length of 91 cm (17 in. I.D. x 3 ft.). The majority of the measurement data predicts an overall 220Rn activity reduction factor of about 1 x 10{sup 9} for such a design; however, two measurements collected at a flow velocity of 18 cm/s (35 ft/min) indicated that the reduction factor could be as low as 1 x 10{sup 6}. The adsorptive capacity of the proposed trap was also evaluated to determine the expected life prior to degradation of performance. Taking a conservative vantage point during analysis, it was estimated that the adsorption effectiveness should not begin to deteriorate until a {sup 220}Rn activity on the order of 10{sup 10} Ci has been processed. It was therefore concluded that degradation of performance would likely occur as the result of causes other than filling by radon progeny.

  4. Use of Activated Charcoal for Rn-220 Adsorption for Operations Associated with the Uranium Deposit in the Auxiliary Charcoal Bed at the Molten Salt Reactor Experiment Facility

    SciTech Connect

    Coleman, R.L.

    1999-03-17

    Measurements have been collected with the purpose of evaluating the effectiveness of activated charcoal for the removal of {sup 220}Rn from process off-gas at the Molten Salt Reactor Experiment (MSRE) at Oak Ridge National Laboratory. A series of bench-scale tests were performed at superficial flow velocities of 10, 18, 24, and 33 cm s{sup -1} (20, 35, 47, and 65 ft min{sup -1}) with a continuous input concentration of {sup 220}Rn in the range of 9 x 10{sup 3} pCi L{sup -1}. In addition, two tests were performed at the MSRE facility by flowing helium through the auxiliary charcoal bed uranium deposit. These tests were performed so that the adsorptive effectiveness could be evaluated with a relatively high concentration of {sup 220}Rn. In addition to measuring the effectiveness of activated charcoal as a {sup 220}Rn adsorption media, the source term for available {sup 220}Rn and gaseous fission products was evaluated and compared to what is believed to be present in the deposit. The results indicate that only a few percent of the total {sup 220}Rn in the deposit is actually available for removal and that the relative activity of fission gases is very small when compared to {sup 220}Rn. The measurement data were then used to evaluate the expected effectiveness of a proposed charcoal adsorption bed consisting of a right circular cylinder having a diameter of 43 cm and a length of 91 cm (17 in. I.D. x 3 ft.). The majority of the measurement data predicts an overall {sup 220}Rn activity reduction factor of about 1 x 10{sup 9} for such a design; however, two measurements collected at a flow velocity of 18 cm s{sup -1} (35 ft min{sup -1}) indicated that the reduction factor could be as low as 1 x 10{sup 6}. The adsorptive capacity of the proposed trap was also evaluated to determine the expected life prior to degradation of performance. Taking a conservative vantage point during analysis, it was estimated that the adsorption effectiveness should not begin to deteriorate

  5. Serum acetaminophen assay using activated charcoal adsorption and gas chromatography without derivatization.

    PubMed

    Jeevanandam, M; Novic, B; Savich, R; Wagman, E

    1980-01-01

    A quantitative assay of acetaminophen in serum has been developed. The drug, together with an internal standard 2-acetamidophenol, is adsorbed on activated charcoal and then extracted into a mixture of ethyl acetate and isopropanol. This extract is then analyzed, without any derivatization, by gas chromatography. The isothermal analysis yielded a good, highly reproducible separation. The drug peak was symmetrical and without any tailing. The peak height response ratio was found to be linear with concentrations ranging from 25-500 ng/L. No interference was observed with the various drugs or metabolites which are commonly encountered in human serum. PMID:7421146

  6. Evaluation of radon adsorption characteristics of a coconut shell-based activated charcoal system for radon and thoron removal applications.

    PubMed

    Karunakara, N; Sudeep Kumara, K; Yashodhara, I; Sahoo, B K; Gaware, J J; Sapra, B K; Mayya, Y S

    2015-04-01

    Radon ((222)Rn), thoron ((220)Rn), and their decay products contribute a major fraction (more than 50%) of doses received from ionisation radiation in public domain indoor environments and occupation environments such as uranium mines, thorium plants, and underground facilities, and are recognised as important radiological hazardous materials, which need to be controlled. This paper presents studies on the removal of (222)Rn and (220)Rn from air using coconut shell-based granular activated charcoal cylindrical adsorber beds. Experiments were conducted to evaluate the (222)Rn and (220)Rn adsorption characteristics, and the mitigation efficiency of coconut-based activated charcoal available in India. The performance parameters evaluated include breakthrough time (τ) and adsorption coefficient (K), and degassing characteristics of the charcoal bed of varying dimensions at different flow rates. While the breakthrough for (222)Rn occurred depending on the dimension of the adsorber bed and flow rates, for (220)Rn, the breakthrough did not occur. The breakthrough curve exhibited a stretched S-shape response, instead of the theoretically predicted sharp step function. The experiments confirm that the breakthrough time individually satisfies the quadratic relationship with respect to the diameter of the bed, and the linear relationship with respect to the length, as predicted in the theory. The K value varied in the range of 2.3-4.12 m(3) kg(-1) with a mean value of 2.99 m(3) kg(-1). The K value was found to increase with the increase in flow rate. Heating the charcoal to ∼ 100 °C resulted in degassing of the adsorbed (222)Rn, and the K of the degassed charcoal and virgin charcoal were found to be similar with no deterioration in performance indicating the re-usability of the charcoal. PMID:25658471

  7. Synthesis of a high-yield activated carbon by air gasification of macadamia nut shell charcoal

    SciTech Connect

    Dai, X.; Antal, M.J. Jr.

    1999-09-01

    Macadamia nut shell charcoal was heated in an inert environment to temperatures above 1000 K (carbonized), reacted with oxygen (Po{sub 2} = 2.68--11.3 kPa) at temperatures between 525 and 586 K (oxygenated), and heated again in an inert environment to temperatures above 1000 K (activated) to produce an activated carbon. Carbons produced by this process possess surface areas and iodine numbers in the range of 400--550. Overall yields of these carbons (based on the dry, raw macadamia nut shell feed) ranged from 24 to 30 wt %. Under the conditions employed in this work, the rates of chemisorption and gasification were not mass transfer limited. Initially, the gasification reaction was first-order with respect to oxygen concentration but became independent of oxygen concentration as the surface sites of the carbon became saturated with oxygen.

  8. Charcoal burner

    SciTech Connect

    Bakic, M.C.

    1988-12-27

    A combustible fuel apparatus is described comprising: side walls formed contiguous with and extending upward from a base and converging to form a closed container, having stacked charcoal fuel particles therein. The base may be placed directly on a substantially horizontal surface and the container may be ignited and substantially burned to ash, and the charcoal fuel particles may be ignited and sufficiently burned for cooking, wherein the charcoal fuel particles are stacked on the base in a relatively stable position prior to the igniting of the container, and are maintained in a relatively stable position during and after the igniting and burning of the container, whereby a mound of ignited charcoal fuel particles remains on the substantially horizontal surface after the burning of the container, the mound having a configuration substantially similar to the shape of the container prior to the combustion thereof.

  9. Radon Adsorbed in Activated Charcoal--A Simple and Safe Radiation Source for Teaching Practical Radioactivity in Schools and Colleges

    ERIC Educational Resources Information Center

    Al-Azmi, Darwish; Mustapha, Amidu O.; Karunakara, N.

    2012-01-01

    Simple procedures for teaching practical radioactivity are presented in a way that attracts students' attention and does not make them apprehensive about their safety. The radiation source is derived from the natural environment. It is based on the radioactivity of radon, a ubiquitous inert gas, and the adsorptive property of activated charcoal.…

  10. Whole-bowel irrigation versus activated charcoal in sorbitol for the ingestion of modified-release pharmaceuticals.

    PubMed

    Kirshenbaum, L A; Mathews, S C; Sitar, D S; Tenenbein, M

    1989-09-01

    Overdose with modified-release pharmaceuticals is an increasing phenomenon. This study examines whole-bowel irrigation as a potential decontamination strategy after overdose with enteric-coated acetylsalicylic acid and compares it with administration of activated charcoal in sorbitol, which is currently the recommended intervention. A three-phase randomized crossover protocol was used in 10 adult volunteers. Each volunteer ingested nine 325 mg doses of enteric-coated acetylsalicylic acid on three occasions, with at least 1 week between each administration period. Serum samples were analyzed for salicylic acid concentration by HPLC. Both interventions decreased peak salicylic acid concentration, time-to-zero salicylic acid concentration, and AUC when compared with control (p less than 0.01). Whole-bowel irrigation was superior to activated charcoal in sorbitol by all three criteria (p less than 0.05). Adverse effects were qualitatively and quantitatively greater during activated charcoal in sorbitol, and the volunteers preferred whole-bowel irrigation over charcoal in sorbitol. Our data suggest that whole-bowel irrigation should be considered for overdose of other modified-release pharmaceuticals. PMID:2673619

  11. An EELS-based study of the effects of pyrolysis on natural carbonaceous materials used for activated charcoal preparation.

    PubMed

    Jeanne-Rose, V; Golabkan, V; Mansot, J L; Largitte, L; Césaire, T; Ouensanga, A

    2003-04-01

    Electron energy-loss spectroscopy (EELS) has been used to characterize the electronic structure of charcoal phases at the nanoscale, thus demonstrating that the technique can be applied to environmental science. Activated charcoal is extensively used to remove pollutants from liquid and gaseous sewage. It is mainly obtained by activation of coke or charcoal produced from ligneous precursors. The present study concerns the use of by-products of local Caribbean agriculture, such as sugar cane bagasse, fruit stones and seeds, for use as activated charcoal precursors. Charcoal phases are prepared by high-temperature pyrolysis of lignocellulosic raw materials under a nitrogen gas flow. With the aim of optimizing the pyrolysis temperature and duration and oxygen content, the concentration of carbon sp2 hybridized chemical bonds and structural ordering have been followed by EELS for different treatment temperatures. To quantify the carbon sp2 content, near edge structure (NES) at the carbon K edge has been measured to determine the strength of pi --> pi* and 1s --> pi* transitions. Three precursors of plant origin, shells of Terminalia catappa and Acrocomia karukerana and seeds of Psidium guajava, with the pyrolysis temperatures between 600 and 900 degrees C, were investigated. The fraction of carbon sp2 bonding is found to increase when the temperature rises from 600 degrees C to the range 700-750 degrees C and becomes stable at higher temperatures. For temperatures in excess of 700 degrees C, structural ordering probably occurs and well-defined 1s --> sigma* NES is present, whose intensity increases with increasing preparation temperature. For the highest temperature of around 900 degrees C, the structure of the final product is less well organized than graphitized carbon but a few per cent of a highly ordered phase is found. PMID:12694416

  12. Replacement of charcoal sorbent in the VOST

    SciTech Connect

    Johnson, L.D.; Fuerst, R.G.; Foster, A.L.; Bursey, J.T.

    1993-01-01

    EPA Method 0030, the Volatile Organic Sampling Train (VOST), for sampling volatile organics from stationary sources, specifies the use of petroleum-base charcoal in the second sorbent tube. Charcoal has proven to be a marginal performer as a sampling sorbent, partly due to inconsistency in analyte recovery. In addition, commercial availability of petroleum charcoal for VOST tubes has been variable. Lack of data on comparability and variability of charcoals for VOST application has created uncertainty when other charcoals are substituted. Five potential sorbent replacements for charcoal in Method 0030 were evaluated along with a reference charcoal. Two of the sorbents tested, Ambersorb XE-340 and Tenax GR, did not perform well enough to qualify as replacements. Three candidates, Anasorb 747, Carbosieve S-III and Kureha Beaded Activated Charcoal, performed adequately, and produced statistically equivalent results. Anasorb 747 appears to be an acceptable replacement for petroleum charcoal, based on a combination of performance, availability, and cost.

  13. Pharmacokinetics of digoxin cross-reacting substances in patients with acute yellow oleander (Thevetia peruviana) poisoning, including the effect of activated charcoal.

    PubMed Central

    Roberts, Darren M; Southcott, Emma; Potter, Julia M; Roberts, Michael S; Eddleston, Michael; Buckley, Nick A

    2008-01-01

    Intentional self-poisonings with seeds from the yellow oleander tree (Thevetia peruviana) are widely reported. Activated charcoal has been suggested to benefit patients with yellow oleander poisoning by reducing absorption and/or facilitating elimination. Two recent randomised controlled trials (RCTs) assessing the efficacy of activated charcoal reported conflicting outcomes in terms of mortality. The effect of activated charcoal on the pharmacokinetics of Thevetia cardenolides has not been assessed. This information may be useful for determining whether further studies are necessary. Serial blood samples were obtained from patients enrolled in a RCT assessing the relative efficacy of single dose (SDAC) and multiple doses (MDAC) of activated charcoal compared to no activated charcoal (NoAC). The concentration of Thevetia cardenolides was estimated using a digoxin immunoassay. The effect of activated charcoal on cardenolide pharmacokinetics was compared between treatment groups using the AUC24, the 24h Mean Residence Time (MRT24), and regression lines obtained from serial concentration points adjusted for exposure. Erratic and prolonged absorption patterns were noted in each patient group. The apparent terminal half-life was highly variable, with a median time of 42.9h. There was a reduction in MRT24 and the apparent terminal half-life estimated from linear regression in patients administered activated charcoal compared to the control group (NoAC). This effect was approximately equal in patients administered MDAC or SDAC. Activated charcoal appears to favourably influence the pharmacokinetic profile of Thevetia cardenolides in patients with acute self-poisoning, which may have clinical benefits. Given the conflicting clinical outcomes noted in previous RCTs, this mechanistic data supports the need for further studies to determine whether a subgroup of patients (eg. those presenting soon after poisoning) will benefit from activated charcoal. PMID:17164695

  14. Charcoal rot

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Charcoal rot is reported occasionally on alfalfa in the U.S. and has also been found in Australia, Pakistan, Uganda, east Africa, and the former Soviet Union. The fungus causing the disease is widespread throughout tropical and subtropical countries. It causes disease on more than 500 crop and we...

  15. Surgical suite environmental control system. [using halothane absorbing filter

    NASA Technical Reports Server (NTRS)

    Higginbotham, E. J.; Jacobs, M. L.

    1974-01-01

    Theoretical and experimental work for a systems analysis approach to the problem of surgical suit exhaust systems centered on evaluation of halothane absorbing filters. An activated charcoal-alumina-charcoal combination proved to be the best filter for eliminating halothane through multilayer absorption of gas molecules.

  16. VOST charcoal specification study

    SciTech Connect

    Fuerst, R.G.; Foster, A.L.; Bursey, J.T.

    1996-12-31

    The volatile organic sampling train (VOST) is currently one the leading methodologies available for the sampling and analysis of volatile principal organic hazardous constituents (POHCs) and products of incomplete combustion (PICs) from stationary sources at very low levels. However, revisions to the original method are necessary to maintain VOST as a viable regulatory tool. To provide performance specifications and identify a replacement for SKC Lot 104 charcoal, a VOST charcoal specification study was initiated. The following carbon-based candidate sorbents were considered: Tenax-GR (a graphitized Tenax); a Petroleum-based Charcoal; Ambersorbe XE-340 (hydrophobic carbonized resin bead); Anasorb 747 (beaded active carbon with very regular pore size); Carbosieve{reg_sign} S-III (carbon molecular sieve); and a Beaded Activated Charcoal (BAC) (with a very regular pore size). The results indicated that Tenax-GR showed significantly poorer performance than the other candidates in preliminary experimental results. Ambersorb did not retain the gaseous volatile organic compounds tested as well as the others and recovery of vinyl chloride was very low at all levels of spiking. Carbosieve was eliminated as a candidate replacement because of cost and handling problems. The petroleum-based charcoal was eliminated because of difficulties in handling a finely-divided powder. The availability of Anasorb 747 proved to be the deciding factor between it and the BAC. Performance, cost, ease of handling, and plentiful supply make Anasorb{reg_sign} 747 a good choice for replacement of SKC Lot 104. 1 tab.

  17. Adsorptive desulphurization study of liquid fuels using Tin (Sn) impregnated activated charcoal.

    PubMed

    Shah, Syed Sikandar; Ahmad, Imtiaz; Ahmad, Waqas

    2016-03-01

    Keeping in view the growing concern regarding desulphurization of petroleum products, the present study was under taken to investigate the efficiency of tin impregnated activated charcoal (Sn-AC) as a potential adsorbent for the desulphurization of model and real commercial straight run kerosene and diesel oil samples. The adsorbent Sn-AC was prepared by wet impregnation process in the laboratory and characterized by SEM, EDX and surface area analysis. Initial experiments were carried out using model oil, which was prepared by dissolving dibenzothiophene (DBT) in cyclohexane, the optimum conditions for desulfurization were found to be, 60°C temperature, 1h contact time and adsorbent dosage of 0.8g, under which about 99.4% of DBT removal was attained. Under optimized conditions the desulfurization of real oil i.e., kerosene and diesel oil was also investigated. Kinetic studies revealed that DBT adsorption followed pseudo second order kinetics and the data best fits in the Langmuir adsorption isotherm as compared to Freundlich adsorption isotherm model. The adsorbent could be easily regenerated simply by washing with toluene for a multiple cycles and reused without losing its efficiency. PMID:26551224

  18. Adsorption of ammonium dinitramide (ADN) from aqueous solutions. 1. Adsorption on powdered activated charcoal.

    PubMed

    Santhosh, G; Venkatachalam, S; Ninan, K N; Sadhana, R; Alwan, S; Abarna, V; Joseph, M A

    2003-03-17

    Investigations on the adsorption of ammonium dinitramide (NH(4)N(NO(2))(2)) (ADN) from aqueous solutions on powdered activated charcoal (PAC) were carried out in order to find out an effective and easier method of separating ADN from aqueous solutions. The effectiveness of PAC in the selective adsorption of ADN from aqueous solutions of ADN (ADN-F) and ADN in presence of sulfate (SO(4)(2-)) and nitrate (NO(3)(-)) ions (ADN-PS) was examined and compared using batch and column methods. The adsorption process follows both Langmuir and Freundlich adsorption isotherms and the isotherm parameters for the models were determined. The observed data favor the formation of monolayer adsorption. The adsorption capacities were found to be 63.3, 119, 105.3 and 82 mg of ADN per g of PAC for ADN-F (batch), ADN-PS (batch), ADN-F (column) and ADN-PS (column), respectively. Break-through curves for ADN-F and ADN-PS were obtained for the optimization of separation of ADN from aqueous solutions. Elution curves were generated for the desorption of ADN from PAC using hot water as eluent. PMID:12628781

  19. Enhanced elimination of piroxicam by administration of activated charcoal or cholestyramine.

    PubMed

    Ferry, D G; Gazeley, L R; Busby, W J; Beasley, D M; Edwards, I R; Campbell, A J

    1990-01-01

    This study has compared the effect of repeated administration of charcoal and cholestyramine on the elimination of piroxicam. Eight young adults were given piroxicam as a single dose of 20 mg, on 3 separate occasions. On one of the occasions charcoal was also given. On another occasion cholestyramine was also administered. The mean elimination half-life after piroxicam alone was 53.1 h. This was reduced to 40.0 h by charcoal administration and to 29.6 h after administration of cholestyramine. In the second phase of the study 7 elderly subjects received piroxicam 20 mg for 14 days on two occasions. Cholestyramine administration at the end of one of the periods reduced the mean elimination half-life of piroxicam from 52.3 h to 27.3 h. PMID:2095346

  20. Gas chromatographic determination of microamounts of glycols and their esters in aqueous medium using adsorption on activated charcoal

    SciTech Connect

    Begunov, G.A.; Titovskaya, V.N.; Galenko, A.V.

    1987-11-10

    Rapid growth of production of glycols and their derivatives, especially methyl and ethyl esters, and wide use of these substances in various branches of the national economy (1) inevitably necessitate analytical monitoring of their content in waste waters and various water bodies. The authors studied the scope of gas-chromatographic determination of microamounts of glycols and their esters in aqueous media at the sanitary standards level (10/sup -5/%) using activated charcoal for their adsorption concentration from aqueous solutions, desorption from the charcoal by ethanol, and evaporationconcentration of the alcoholic solutions. The quantitative concentration characteristics were studied with reference to ethylene glycol, propylene glycol, diethylene glycol, dipropylene glycol, triethyleneglycol, tripropylene glycol, tetraethylene glycol, ethylcellosolve, ethyl carbitol, and monoethyl ester of triethylene glycol.

  1. Application of the revised DBA source term to a non-charcoal-filtered control room ventilation system

    SciTech Connect

    Radvansky, M.S.; Metcalf, J.E.

    1997-12-01

    An outstanding licensing issue at GPU Nuclear`s Oyster Creek plant had been the question of thyroid dose to a control room operator following the Title 10, Code of Federal Regulations, Part 100 (10 CFR 100) design basis accident (DBA). Oyster Creek is a 620-MW boiling water reactor (BWR), located in New Jersey, that began commercial operation in December 1969. The calculational problem was complicated by the fact that the 28-yr-old unit was one of the few plants that did not incorporate charcoal filtration into the control room ventilation system. The main contributor to the thyroid dose in a control room habitability calculation for a BWR is main steam isolation valve (MSIV) leakage. The technical specification limit for MSIV leakage at Oyster Creek is 15.9 SCFH (maximum) for each isolation valve. The work ongoing in the development of NUREG-1465, the revised DBA source term document, provided a potential method to calculate a more realistic dose compared with the current TID-14844 source term and Regulatory Guide 1.3 input data and accident propagation assumptions. Preliminary calculations using TID-14844 suggested that expensive modifications be made to the plant. Such modifications could have economically challenged the plant`s viability.

  2. Population pharmacokinetics and pharmacodynamics of escitalopram in overdose and the effect of activated charcoal

    PubMed Central

    van Gorp, Freek; Duffull, Stephen; Hackett, L Peter; Isbister, Geoffrey K

    2012-01-01

    AIMS To describe the pharmacokinetics and pharmacodynamics (PKPD) of escitalopram in overdose and its effect on QT prolongation, including the effectiveness of single dose activated charcoal (SDAC). METHODS The data set included 78 escitalopram overdose events (median dose, 140 mg [10–560 mg]). SDAC was administered 1.0 to 2.6 h after 12 overdoses (15%). A fully Bayesian analysis was undertaken in WinBUGS 1.4.3, first for a population pharmacokinetic (PK) analysis followed by a PKPD analysis. The developed PKPD model was used to predict the probability of having an abnormal QT as a surrogate for torsade de pointes. RESULTS A one compartment model with first order input and first-order elimination described the PK data, including uncertainty in dose and a baseline concentration for patients taking escitalopram therapeutically. SDAC reduced the fraction absorbed by 31% and reduced the individual predicted area under the curve adjusted for dose (AUCi/dose). The absolute QT interval was related to the observed heart rate with an estimated individual heart rate correction factor (α = 0.35). The heart rate corrected QT interval (QTc) was linearly dependent on predicted escitalopram concentration [slope = 87 ms/(mg l–1)], using a hypothetical effect-compartment (half-life of effect-delay, 1.0h). Administration of SDAC significantly reduced QT prolongation and was shown to reduce the risk of having an abnormal QT by approximately 35% for escitalopram doses above 200 mg. CONCLUSIONS There was a dose-related lengthening of the QT interval that lagged the increase in drug concentration. SDAC resulted in a moderate reduction in fraction of escitalopram absorbed and reduced the risk of the QT interval being abnormal. PMID:21883384

  3. The pharmacokinetics of sertraline in overdose and the effect of activated charcoal

    PubMed Central

    Cooper, Joyce M; Duffull, Stephen B; Saiao, Ana S; Isbister, Geoffrey K

    2015-01-01

    Aims To investigate the pharmacokinetics (PK) of sertraline in overdose and the effect of single dose activated charcoal (SDAC). Methods Patients presenting to a toxicology unit with sertraline overdoses had demographic and clinical information recorded, and serial serum collected for measurement of sertraline concentrations. Monolix® version 4.2 was used to develop a population PK model of sertraline overdose and the effect of SDAC. Uncertainty in dose time was accounted for by shifting dose time using lag time with between subject variability (BSV). BSV on relative fraction absorbed was used to model uncertainty in dose. Results There were 77 timed sertraline concentrations measured in 28 patients with sertraline overdoses with a median dose of 1550 mg (250–5000 mg). SDAC was given to seven patients between 1.5 and 4 h post-overdose. A one compartment model with lag time of 1 h and first order input and elimination adequately described the data. Including BSV on both lag time and relative fraction absorbed improved the model. The population PK parameter estimates for absorption rate constant, volume of distribution and clearance were 0.895 h−1, 5340 l and 130 l h−1, respectively. The calculated half-life of sertraline following overdose was 28 h (IQR 19.4−30.6h). When given up to 4 h post-overdose, SDAC significantly increased the clearance of sertraline by a factor of 1.9, decreased the area under the curve and decreased the maximum plasma concentration (Cmax). Conclusions Sertraline had linear kinetics in overdose with parameter values similar to those in therapeutic use. SDAC is effective in increasing clearance when given 1.5 to 4 h post-overdose. PMID:25155462

  4. Study of Single Catalytic Events at Copper-in-Charcoal: Localization of Click Activity Through Subdiffraction Observation of Single Catalytic Events.

    PubMed

    Decan, Matthew R; Scaiano, Juan C

    2015-10-15

    Single molecule fluorescence microscopy reveals that copper-in-charcoal--a high performance click catalyst- has remarkably few catalytic sites, with 90% of the charcoal particles being inactive, and for the catalytic ones the active sites represent a minute fraction (∼0.003%) of the surface. The intermittent nature of the catalytic events enables subdiffraction resolution and mapping of the catalytic sites. PMID:26722775

  5. Active resistance capacitance filter design

    NASA Technical Reports Server (NTRS)

    Kerwin, W. J.

    1970-01-01

    Filters, formed by combinations of distributed RC elements with positive-feedback voltage amplifiers, provide transfer functions similar to those the heavier LC filters ordinarily employ. They also provide signal amplification.

  6. A theoretical model for {sup 222}Rn adsorption on activated charcoal canisters in humid air based on Polanyi`s potential theory

    SciTech Connect

    Scarpitta, S.C.

    1995-03-01

    Water vapor interferes with adsorption {sup 222}Rn gas by passive activated charcoal devices used to estimate indoor air concentrations. The {sup 222}Rn adsorption coefficient is the fundamental parameter characterizing charcoal`s ability to adsorb {sup 222}Rn. The Dubinin-Radushkevich equation, based on Polanyi`s potential theory, was modified to include two terms quantifying the effect of both water vapor and sampling time on the {sup 222}Rn adsorption coefficient of passive charcoal devices. A single equation was derived that quantities the {sup 222}Rn adsorption coefficients at any temperature, humidity and exposure time using six experimentally determined physical constants that are unique for a particular passive charcoal device. The theoretical model was verified with published experimental data, and it showed a good correlation between theory and experiment. The model proved to be consistent with experimental data, provided that the amount of water vapor adsorbed by the charcoal device during sampling remains below a critical level, termed the breakpoint. 44 refs., 5 figs., 2 tabs.

  7. Active imaging system with Faraday filter

    DOEpatents

    Snyder, J.J.

    1993-04-13

    An active imaging system has a low to medium powered laser transmitter and receiver wherein the receiver includes a Faraday filter with an ultranarrow optical bandpass and a bare (nonintensified) CCD camera. The laser is locked in the vicinity of the passband of the Faraday filter. The system has high sensitivity to the laser illumination while eliminating solar background.

  8. Active imaging system with Faraday filter

    DOEpatents

    Snyder, James J.

    1993-01-01

    An active imaging system has a low to medium powered laser transmitter and receiver wherein the receiver includes a Faraday filter with an ultranarrow optical bandpass and a bare (nonintensified) CCD camera. The laser is locked in the vicinity of the passband of the Faraday filter. The system has high sensitivity to the laser illumination while eliminating solar background.

  9. Water Filters

    NASA Technical Reports Server (NTRS)

    1988-01-01

    Seeking to find a more effective method of filtering potable water that was highly contaminated, Mike Pedersen, founder of Western Water International, learned that NASA had conducted extensive research in methods of purifying water on board manned spacecraft. The key is Aquaspace Compound, a proprietary WWI formula that scientifically blends various types of glandular activated charcoal with other active and inert ingredients. Aquaspace systems remove some substances; chlorine, by atomic adsorption, other types of organic chemicals by mechanical filtration and still others by catalytic reaction. Aquaspace filters are finding wide acceptance in industrial, commercial, residential and recreational applications in the U.S. and abroad.

  10. Reduction in uptake by rice and soybean of aromatic arsenicals from diphenylarsinic acid contaminated soil amended with activated charcoal.

    PubMed

    Arao, Tomohito; Maejima, Yuji; Baba, Koji

    2011-10-01

    Activated charcoal (AC) amendment has been suggested as a promising method to immobilize organic contaminants in soil. We performed pot experiments with rice and soybean grown in agricultural soil polluted by aromatic arsenicals (AAs). The most abundant AA in rice grains and soybean seeds was methylphenylarsinic acid (MPAA). MPAA concentration in rice grains was significantly reduced to 2% and 3% in 0.2% AC treated soil compared to untreated soil in the first year of rice cultivation. In the second year, MPAA concentration in rice grains was significantly reduced to 15% in 0.2% AC treated soil compared to untreated soil. MPAA concentration in soybean seeds was significantly reduced to 44% in 0.2% AC treated soil compared to untreated soil. AC amendment was effective in reducing AAs in rice and soybean. PMID:21782301

  11. Effect of a catalyst on the kinetics of reduction of celestite (SrSO{sub 4}) by active charcoal

    SciTech Connect

    Sonawane, R.S.; Kale, B.B.; Apte, S.K.; Dongare, M.K.

    2000-02-01

    Reduction of celestite (SrSO{sub 4}) powder with particles of active charcoal has been studied extensively in the absence and presence of catalysts. The optimum temperature at the charging zone has been optimized to get a maximum water-soluble strontium sulfide value. The strontium value has been analyzed using a chemical method, which was verified by the instrumental method using an inductively coupled plasma-optical emission spectrophotometer (ICP-OES). The conversion-time data have been analyzed by using a modified volume-reaction (MVR) model, and the effect of the catalyst on kinetic parameters has been elucidated. It was found that potassium carbonate, potassium dichromate, sodium carbonate, and sodium dichromate catalysts were found to enhance the reaction rate quite satisfactorily in the reduction of the celestite (SrSO{sub 4}).

  12. Simultaneous removal of 2,4-dichlorophenol and Cd from soils by electrokinetic remediation combined with activated bamboo charcoal.

    PubMed

    Ma, Jian Wei; Wang, Fa Yuan; Huang, Zheng Hong; Wang, Hui

    2010-04-15

    An in situ electrokinetic remediation technique was designed by combining the uniform electrokinetic technology with a new-type of bamboo charcoal as adsorbent. A bench-scale experiment was conducted to investigate the application of this technique for simultaneous removal of 2,4-dichlorophenol (2,4-DCP) and Cd from a sandy loam at different periodic polarity-reversals. The contaminated soil was artificially spiked with 100 mg/kg 2,4-DCP and 500 mg/kg Cd. Two modes of polarity-reversal intervals of 12 and 24 h were included. After 10.5 d of operation, about 75.97% of Cd and 54.92% of 2,4-DCP were removed from soil at intervals of 24 h, whilst only 40.13% of Cd and 24.98% of 2,4-DCP were removed at intervals of 12 h. Soil water contents under two operation modes both significantly decreased, but evenly distributed spatially. Soil pH values under two operation modes were all maintained in the range from 7.2 to 7.4, close to the initial value. The electricity consumption per day was 12.24 and 11.61 kWh/m(3)/d, respectively at polarity-reversal intervals of 12 and 24 h. In conclusion, at polarity-reversal interval of 24 h, electroremediation combined with activated bamboo charcoal was effective in simultaneous removal of 2,4-DCP and Cd from soil. Our results indicate a promising potential in in situ electroremediation of soils co-contaminated with organics and heavy metals. PMID:20006426

  13. Handbook of charcoal making: the traditional and industrial methods

    SciTech Connect

    Emrich, W.

    1985-01-01

    The reviewer credits this handbook with expanding knowledge about the economic value of charcoal, particularly in the European area. The 10 chapters are: (1) history and fundamentals of the charcoal process, (2) traditional methods of the smallholder producer, (3) concepts and technology for the industrial producer, (4) recovering commercial products from pyrolysis oil, (5) raw materials supply, (6) end-use markets for by-products, (7) planning a charcoal venture, (8) charcoal briquettes and activated charcoal, (9) safety precautions and environmental considerations, and (10) charcoal laboratory work. Each chapter lists references. There are four appendices.

  14. Continued studies of co-pumping of deuterium and helium on a single, 4K activated charcoal panel

    SciTech Connect

    Walthers, C.R.; Jenkins, E.M. ); Batzer, T.H. ); Sedgley, D.W. ); Konishi, S.; Ohira, S.; Naruse, Y. )

    1990-09-01

    The short program undertaken in 1989 to evaluate the feasibility of co-pumping deuterium and tritium (DT) and helium on a charcoal sorbent showed that the charcoal will indeed simultaneously pump the gases. Of interest also was the fact that the total accumulation of helium (capacity) was virtually identical in constant throughput runs in which the D{sub 2}/He ratio was changed between runs. The test program described in this paper undertaken to evaluate further the co-pumping capabilities of the charcoal sorbent.

  15. Adsorption and desorption of noble gases on activated charcoal: II. sup 222 Rn studies in a monolayer and packed bed

    SciTech Connect

    Scarpitta, S.C.; Harley, N.H. )

    1990-10-01

    The adsorptive and desorptive characteristics of canisters containing a petroleum-based charcoal were investigated under controlled conditions of temperature, relative humidity, and Rn concentration. Charcoals exposed in a monolayer and packed bed during exposure intervals of 1-7 d demonstrate that Rn adsorption and desorption are dependent on bed depth and the amount of water adsorbed. Changes in the adsorptive and desorptive properties of the charcoal occurred near the break-point where the pores became occluded by water vapor that condenses in the entrance capillaries. Radon-222 adsorption is decreased by an order of magnitude as the amount of adsorbed water exceeds the break-point of the charcoal. The reduction in pore surface due to adsorbed water results in a marked increase in the rate of Rn loss from exposed canisters, accounting for reduced adsorption. The apparent desorption time-constant for a 2-cm bed of loose Witco 6 x 10 mesh charcoal containing 0.220-0.365 kg H{sub 2}O kg-1 is typically between 2-8 h. The apparent desorption time-constant for an equivalent packed bed containing a water vapor content of 0.026-0.060 kg H{sub 2}O kg-1, which is below the break-point of the charcoal, is about 15-30 h. Conventional charcoal canisters, if exposed in the fully-opened configuration, can achieve the break-point in less than 4 d at 70% humidity. The use of a diffusion barrier would allow for longer exposure times until the break-point of the charcoal is achieved.

  16. Estrogenic activity of UV filter mixtures.

    PubMed

    Kunz, Petra Y; Fent, Karl

    2006-11-15

    UV-absorbing chemicals (UV filters) are widely used for protection against UV radiation in sunscreens and in a variety of cosmetic products and materials. Depending on the breadth and factor of UV protection, they are added as single compounds or as a combination thereof. Some UV filters have estrogenic activity, but their activity and interactions in mixtures are largely unknown. In this work, we analyzed 8 commonly used UV filters, which are pure or partial hERalpha agonists, for their estrogenic activity in equieffective mixtures in a recombinant yeast assay carrying the human estrogen receptor alpha (hERalpha). Mixtures of two, four and eight UV filters alone, or in combination with 17 beta estradiol (E2), were assessed at different effect levels and no-observed-effect-concentrations (NOEC). Predictions of the joint effects of these mixtures were calculated by employing the concentration addition (CA) and independent action (IA) model. Most binary mixtures comprising of pure hERalpha agonists showed a synergistic activity at all mixture combinations. Only in combination with benzophenone-1, antagonistic activity was observed at some effect levels. All mixtures of four or eight, pure or pure and partial hERalpha agonists, alone or including E2, showed synergistic activity at concentrations giving an increase of 10% of basal activity (BC10). This occurred even at concentrations that were at the NOEC level of each single compound. Hence, there were substantial mixture effects even though each UV filter was present at its NOEC level. These results show that significant interactions occur in UV filter mixtures, which is important for the hazard and risk assessments of these personal care products. PMID:17027055

  17. Estrogenic activity of UV filter mixtures

    SciTech Connect

    Kunz, Petra Y. . E-mail: petra.kunz@fhnw.ch; Fent, Karl . E-mail: karl.fent@bluewin.ch

    2006-11-15

    UV-absorbing chemicals (UV filters) are widely used for protection against UV radiation in sunscreens and in a variety of cosmetic products and materials. Depending on the breadth and factor of UV protection, they are added as single compounds or as a combination thereof. Some UV filters have estrogenic activity, but their activity and interactions in mixtures are largely unknown. In this work, we analyzed 8 commonly used UV filters, which are pure or partial hER{alpha} agonists, for their estrogenic activity in equieffective mixtures in a recombinant yeast assay carrying the human estrogen receptor alpha (hER{alpha}). Mixtures of two, four and eight UV filters alone, or in combination with 17 {beta} estradiol (E2), were assessed at different effect levels and no-observed-effect-concentrations (NOEC). Predictions of the joint effects of these mixtures were calculated by employing the concentration addition (Canada) and independent action (IA) model. Most binary mixtures comprising of pure hER{alpha} agonists showed a synergistic activity at all mixture combinations. Only in combination with benzophenone-1, antagonistic activity was observed at some effect levels. All mixtures of four or eight, pure or pure and partial hER{alpha} agonists, alone or including E2, showed synergistic activity at concentrations giving an increase of 10% of basal activity (BC10). This occurred even at concentrations that were at the NOEC level of each single compound. Hence, there were substantial mixture effects even though each UV filter was present at its NOEC level. These results show that significant interactions occur in UV filter mixtures, which is important for the hazard and risk assessments of these personal care products.

  18. Ozone-removal efficiencies of activated carbon filters after more than three years of continuous service

    SciTech Connect

    Weschler, C.J.; Shields, H.C.; Naik, D.V.

    1994-12-31

    This paper evaluates the efficiency with which commercial charcoal filters remove ozone. Three different applications have been examined: a test plenum, an air handler providing outside air to a Class 100 clean room, and a plenum downstream of an air handler providing outside air to another Class 100 clean room. After 37 months, the charcoal in the test plenum has decreased in removal efficiency from 95% to 90%. After 37 months, the charcoal servicing the first clean room has decreased in efficiency from 85% to 60%. After 24 months, the charcoal servicing the second clean room is still removing 95% of the ozone in the airstream. The charcoal filters associated with the test plenum and the second clean room are better protected from submicron particles than those associated with the first clean room. The accumulation of fine particles on the charcoal appears to influence service life. This work is an extension of the preliminary results (20 months of service) that were reported for the filters associated with the test plenum and the first clean room (Weschler et al. 1993).

  19. Heavy metal removal from MSWI fly ash by electrokinetic remediation coupled with a permeable activated charcoal reactive barrier

    PubMed Central

    Huang, Tao; Li, Dongwei; Kexiang, Liu; Zhang, Yuewei

    2015-01-01

    This paper presents the investigations into the feasibility of the application of a remediation system that couples electrokinetic remediation (EKR) with the permeable reactive barrier (PRB) concept for municipal solid waste incineration (MSWI) fly ash with activated charcoal as the PRB material. The experimental results of this study showed that the proposed combined method can effectively improve the remediation efficiency and that the addition of the oxalic acid to the PRB media before the coupled system can further enhance the remediation process. In the optimization tests, the maximum removals of Zn, Pb, Cu and Cd were achieved under different experimental conditions. The voltage gradient and processing time were shown to have significant effects on the removal of Cu and Cd, whereas the addition of the oxalic acid had a more significant influence on the removal of Pb. Generally, the processing time is the most significant factor in changing the removal rates of HMs in the enhanced coupled system. In terms of the leaching toxicity, the specimen remediated by ENEKR + PRB showed the lowest leaching value for each HM in the S2 and S3 regions. PMID:26486449

  20. Heavy metal removal from MSWI fly ash by electrokinetic remediation coupled with a permeable activated charcoal reactive barrier

    NASA Astrophysics Data System (ADS)

    Huang, Tao; Li, Dongwei; Kexiang, Liu; Zhang, Yuewei

    2015-10-01

    This paper presents the investigations into the feasibility of the application of a remediation system that couples electrokinetic remediation (EKR) with the permeable reactive barrier (PRB) concept for municipal solid waste incineration (MSWI) fly ash with activated charcoal as the PRB material. The experimental results of this study showed that the proposed combined method can effectively improve the remediation efficiency and that the addition of the oxalic acid to the PRB media before the coupled system can further enhance the remediation process. In the optimization tests, the maximum removals of Zn, Pb, Cu and Cd were achieved under different experimental conditions. The voltage gradient and processing time were shown to have significant effects on the removal of Cu and Cd, whereas the addition of the oxalic acid had a more significant influence on the removal of Pb. Generally, the processing time is the most significant factor in changing the removal rates of HMs in the enhanced coupled system. In terms of the leaching toxicity, the specimen remediated by ENEKR + PRB showed the lowest leaching value for each HM in the S2 and S3 regions.

  1. Heavy metal removal from MSWI fly ash by electrokinetic remediation coupled with a permeable activated charcoal reactive barrier.

    PubMed

    Huang, Tao; Li, Dongwei; Kexiang, Liu; Zhang, Yuewei

    2015-01-01

    This paper presents the investigations into the feasibility of the application of a remediation system that couples electrokinetic remediation (EKR) with the permeable reactive barrier (PRB) concept for municipal solid waste incineration (MSWI) fly ash with activated charcoal as the PRB material. The experimental results of this study showed that the proposed combined method can effectively improve the remediation efficiency and that the addition of the oxalic acid to the PRB media before the coupled system can further enhance the remediation process. In the optimization tests, the maximum removals of Zn, Pb, Cu and Cd were achieved under different experimental conditions. The voltage gradient and processing time were shown to have significant effects on the removal of Cu and Cd, whereas the addition of the oxalic acid had a more significant influence on the removal of Pb. Generally, the processing time is the most significant factor in changing the removal rates of HMs in the enhanced coupled system. In terms of the leaching toxicity, the specimen remediated by ENEKR + PRB showed the lowest leaching value for each HM in the S2 and S3 regions. PMID:26486449

  2. Multichannel, Active Low-Pass Filters

    NASA Technical Reports Server (NTRS)

    Lev, James J.

    1989-01-01

    Multichannel integrated circuits cascaded to obtain matched characteristics. Gain and phase characteristics of channels of multichannel, multistage, active, low-pass filter matched by making filter of cascaded multichannel integrated-circuit operational amplifiers. Concept takes advantage of inherent equality of electrical characteristics of nominally-identical circuit elements made on same integrated-circuit chip. Characteristics of channels vary identically with changes in temperature. If additional matched channels needed, chips containing more than two operational amplifiers apiece (e.g., commercial quad operational amplifliers) used. Concept applicable to variety of equipment requiring matched gain and phase in multiple channels - radar, test instruments, communication circuits, and equipment for electronic countermeasures.

  3. Ozone Removal by Filters Containing Activated Carbon: A Pilot Study

    SciTech Connect

    Fisk, William; Spears, Mike; Sullivan, Douglas; Mendell, Mark

    2009-09-01

    This study evaluated the ozone removal performance of moderate-cost particle filters containing activated carbon when installed in a commercial building heating, ventilating, and air conditioning (HVAC) system. Filters containing 300 g of activated carbon per 0.09 m2 of filter face area were installed in two 'experimental' filter banks within an office building located in Sacramento, CA. The ozone removal performance of the filters was assessed through periodic measurements of ozone concentrations in the air upstream and downstream of the filters. Ozone concentrations were also measured upstream and downstream of a 'reference' filter bank containing filters without any activated carbon. The filter banks with prefilters containing activated carbon were removing 60percent to 70percent of the ozone 67 and 81 days after filter installation. In contrast, there was negligible ozone removal by the reference filter bank without activated carbon.

  4. [The use of Dnipro activated charcoal filamentous material in performing extracorporeal sorption detoxification].

    PubMed

    Popov, V D; Serheiev, V P; Sobko, I V; Litvinov, V F

    1998-01-01

    Experimental estimation of properties of an activated carbonic fibrillar material "Dnipro" was conducted. Its application perspectivity while conduction of plasmo-, lympho- and hemosorption was proved. PMID:10050405

  5. Activation of waste MDF sawdust charcoal and its reactive dye adsorption characteristics.

    PubMed

    Gan, Q; Allen, S J; Matthews, R

    2004-01-01

    This paper reports an experimental investigation of converting waste medium density fibreboard (MDF) sawdust into chars and activated carbon using chemical activation and thermal carbonisation processes. The MDF sawdust generated during the production of architectural mouldings was characterised and found to have unique properties in terms of fine particle size and high particle density. It also has a high content of urea formaldehyde resin used as a binder in the manufacturing of MDF board. Direct thermal carbonisation and chemical activation of the sawdust by metal impregnation and acid (phosphoric acid) treatment prior to pyrolysis treatment were carried out. The surface morphology of the raw dust, its chars and activated carbon were examined using scanning electron microscopy (SEM). Adsorptive properties and total pore volume of the materials were also analysed using the BET nitrogen adsorption method. Liquid adsorption of a reactive dye (Levafix Brilliant red E-4BA) by the derived sawdust carbon was investigated in batch isothermal adsorption process and the results compared to adsorption on to a commercial activated carbon (Filtrasorb F400). The MDF sawdust carbon exhibited in general a very low adsorption capacity towards the reactive dye, and physical characterisation of the carbon revealed that the conventional chemical activation and thermal carbonisation process were ineffective in developing a microporous structure in the dust particles. The small size of the powdery dust, the high particle density, and the presence of the urea formaldehyde resin all contributed to the difficulty of developing a proper porous structure during the thermal and chemical activation process. Finally, activation of the dust material in a consolidated form (cylindrical pellet) only achieved very limited improvement in the dye adsorption capacity. This original study, reporting some unexpected outcomes, may serve as a stepping-stone for future investigations of recycle and

  6. Gasification of blended animal manures to produce synthesis gas and activated charcoal

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Blended swine solids, chicken litter, and hardwood are renewable and expensive sources to produce combined heat and power (CHP), fuels and related chemicals. The therrmochemical pathway to gasify manure has the added advantage of destroying harmful pathogens and pharmaceutically active compounds dur...

  7. Active flutter suppression using dipole filters

    NASA Technical Reports Server (NTRS)

    Srinathkumar, S.; Waszak, Martin R.

    1992-01-01

    By using traditional control concepts of gain root locus, the active suppression of a flutter mode of a flexible wing is examined. It is shown that the attraction of the unstable mode towards a critical system zero determines the degree to which the flutter mode can be stabilized. For control situations where the critical zero is adversely placed in the complex plane, a novel compensation scheme called a 'Dipole' filter is proposed. This filter ensures that the flutter mode is stabilized with acceptable control energy. The control strategy is illustrated by designing flutter suppression laws for an active flexible wing (AFW) wind-tunnel model, where minimal control effort solutions are mandated by control rate saturation problems caused by wind-tunnel turbulence.

  8. VOST charcoal specification study

    SciTech Connect

    Foster, A.L.; Bursey, J.T.

    1995-07-01

    The volatile organic sampling train, SW-846 Method 0030, (VOST) is currently one of the leading methodology`s available for the sampling and analysis of volatile organic hazardous compounds from stationary sources at very low levels. The method does not identify a specific equivalent sorbent, nor the performance specifications which would allow determination of an equivalent. Lot 104 petroleum-based charcoal is no longer commercially available. Laboratories are presently using a wide range of substitutes with varying performance from batch to batch of charcoal. To provide performance specifications and identify a replacement for SKC Lot 104 charcoal, a VOST charcoal specification study was initiated. Performance, cost, ease of handling, and plentiful supply make Anasorb 747 a good choice for replacement of SKX Lot 104.

  9. A Novel Activated-Charcoal-Doped Multiwalled Carbon Nanotube Hybrid for Quasi-Solid-State Dye-Sensitized Solar Cell Outperforming Pt Electrode.

    PubMed

    Arbab, Alvira Ayoub; Sun, Kyung Chul; Sahito, Iftikhar Ali; Qadir, Muhammad Bilal; Choi, Yun Seon; Jeong, Sung Hoon

    2016-03-23

    Highly conductive mesoporous carbon structures based on multiwalled carbon nanotubes (MWCNTs) and activated charcoal (AC) were synthesized by an enzymatic dispersion method. The synthesized carbon configuration consists of synchronized structures of highly conductive MWCNT and porous activated charcoal morphology. The proposed carbon structure was used as counter electrode (CE) for quasi-solid-state dye-sensitized solar cells (DSSCs). The AC-doped MWCNT hybrid showed much enhanced electrocatalytic activity (ECA) toward polymer gel electrolyte and revealed a charge transfer resistance (RCT) of 0.60 Ω, demonstrating a fast electron transport mechanism. The exceptional electrocatalytic activity and high conductivity of the AC-doped MWCNT hybrid CE are associated with its synchronized features of high surface area and electronic conductivity, which produces higher interfacial reaction with the quasi-solid electrolyte. Morphological studies confirm the forms of amorphous and conductive 3D carbon structure with high density of CNT colloid. The excessive oxygen surface groups and defect-rich structure can entrap an excessive volume of quasi-solid electrolyte and locate multiple sites for iodide/triiodide catalytic reaction. The resultant D719 DSSC composed of this novel hybrid CE fabricated with polymer gel electrolyte demonstrated an efficiency of 10.05% with a high fill factor (83%), outperforming the Pt electrode. Such facile synthesis of CE together with low cost and sustainability supports the proposed DSSCs' structure to stand out as an efficient next-generation photovoltaic device. PMID:26911208

  10. Active pixel sensors with substantially planarized color filtering elements

    NASA Technical Reports Server (NTRS)

    Fossum, Eric R. (Inventor); Kemeny, Sabrina E. (Inventor)

    1999-01-01

    A semiconductor imaging system preferably having an active pixel sensor array compatible with a CMOS fabrication process. Color-filtering elements such as polymer filters and wavelength-converting phosphors can be integrated with the image sensor.

  11. paleofire: An R package to analyse sedimentary charcoal records from the Global Charcoal Database to reconstruct past biomass burning

    NASA Astrophysics Data System (ADS)

    Blarquez, Olivier; Vannière, Boris; Marlon, Jennifer R.; Daniau, Anne-Laure; Power, Mitchell J.; Brewer, Simon; Bartlein, Patrick J.

    2014-11-01

    We describe a new R package, paleofire, for analysis and synthesis of charcoal time series, such as those contained in the Global Charcoal Database (GCD), that are used to reconstruct paleofire activity (past biomass burning). paleofire is an initiative of the Global Paleofire Working Group core team (www.gpwg.org), whose aim is to encourage the use of sedimentary charcoal series to develop regional-to-global syntheses of paleofire activity, and to enhance access to the GCD data by providing a common research framework. Currently, paleofire features are organized into three different parts related to (i) site selection and charcoal series extraction from the GCD; (ii) charcoal data transformation; and (iii) charcoal series compositing and synthesis. We provide a technical description of paleofire and describe some new implementations such as the circular block bootstrap procedure. We tested the software using GCDv3 data from eastern North America, and provide examples of interpreting results of regional and global syntheses.

  12. An RC active filter design handbook

    NASA Technical Reports Server (NTRS)

    Deboo, G. J.

    1977-01-01

    The design of filters is described. Emphasis is placed on simplified procedures that can be used by the reader who has minimum knowledge about circuit design and little acquaintance with filter theory. The handbook has three main parts. The first part is a review of some information that is essential for work with filters. The second part includes design information for specific types of filter circuitry and describes simple procedures for obtaining the component values for a filter that will have a desired set of characteristics. Pertinent information relating to actual performance is given. The third part (appendix) is a review of certain topics in filter theory and is intended to provide some basic understanding of how filters are designed.

  13. Paracetamol biodegradation by activated sludge and photocatalysis and its removal by a micelle-clay complex, activated charcoal, and reverse osmosis membranes.

    PubMed

    Karaman, Rafik; Khamis, Mustafa; Abbadi, Jehad; Amro, Ahmad; Qurie, Mohannad; Ayyad, Ibrahim; Ayyash, Fatima; Hamarsheh, Omar; Yaqmour, Reem; Nir, Shlomo; Bufo, Sabino A; Scrano, Laura; Lerman, Sofia; Gur-Reznik, Shirra; Dosoretz, Carlos G

    2016-10-01

    Kinetic studies on the stability of the pain killer paracetamol in Al-Quds activated sludge demonstrated that paracetamol underwent biodegradation within less than one month to furnish p-aminophenol in high yields. Characterizations of bacteria contained in Al-Quds sludge were accomplished. It was found that Pseudomonas aeruginosa is the bacterium most responsible for the biodegradation of paracetamol to p-aminophenol and hydroquinone. Batch adsorptions of paracetamol and its biodegradation product (p-aminophenol) by activated charcoal and a composite micelle (octadecyltrimethylammonium)-clay (montmorillonite) were determined at 25°C. Adsorption was adequately described by a Langmuir isotherm, and indicated better efficiency of removal by the micelle-clay complex. The ability of bench top reverse osmosis (RO) plant as well as advanced membrane pilot plant to remove paracetamol was also studied at different water matrixes to test the effect of organic matter composition. The results showed that at least 90% rejection was obtained by both plants. In addition, removal of paracetamol from RO brine was investigated by using photocatalytic processes; optimal conditions were found to be acidic or basic pH, in which paracetamol degraded in less than 5 min. Toxicity studies indicated that the effluent and brine were not toxic except for using extra low energy membrane which displayed a half maximal inhibitory concentration (IC-50) value of 80%. PMID:26852629

  14. Occupational exposure to complex mixtures of volatile organic compounds in ambient air: desorption from activated charcoal using accelerated solvent extraction can replace carbon disulfide?

    PubMed

    Fabrizi, Giovanni; Fioretti, Marzia; Rocca, Lucia Mainero

    2013-01-01

    A desorption study of 57 volatile organic compounds (VOCs) has been conducted by use of accelerated solvent extraction (ASE) and gas chromatography-mass spectrometry. Different solvents were tested to extract activated charcoal tubes with the objective of replacing carbon disulfide, used in official methods, because of its highly toxic health and environmental effects. Extraction conditions, for example temperature and number of cycles, were investigated and optimized. The definitive extraction procedure selected was use of acetone at 150 °C and two consecutive extraction cycles at a pressure of 1,500 psi. Considering a sample volume of 0.005 Nm(3), corresponding to a sampling time of 8 h at a flow rate of 0.01 L min(-1), the method was validated over the concentration range 65-26,300 μg Nm(-3). The lowest limit of quantification was 6 μg Nm(-3), and recovery for the 93 % of analytes ranged from 65 to 102 %. For most of the compounds, relative standard deviations were less than 15 % for inter and intra-day precision. Uncertainty of measurement was also determined: the relative expanded uncertainty was always below 29.6 %, except for dichlorodifluoromethane. This work shows that use of friendlier solvent, for example acetone, coupled with use of ASE, can replace use of CS(2) for chemical removal of VOCs from activated charcoal. ASE has several advantages over traditional solvent-extraction methods, including shorter extraction time, minimum sample manipulation, high reproducibility, and less extraction discrimination. No loss of sensitivity occurs and there is also a salutary effect on bench workers' health and on the smell of laboratory air. PMID:22968683

  15. Impact of land-use and long-term (>150 years) charcoal accumulation on microbial activity, biomass and community structure in temperate soils (Belgium).

    NASA Astrophysics Data System (ADS)

    Hardy, Brieuc; Cornelis, Jean-Thomas; Dufey, Joseph E.

    2015-04-01

    In the last decade, biochar has been increasingly investigated as a soil amendment for long-term soil carbon sequestration while improving soil fertility. On the short term, biochar application to soil generally increases soil respiration as well as microbial biomass and activity and affects significantly the microbial community structure. However, such effects are relatively short-term and tend to vanish over time. In our study, we investigated the long-term impact of charcoal accumulation and land-use on soil biota in temperate haplic Luvisols developed in the loess belt of Wallonia (Belgium). Charcoal-enriched soils were collected in the topsoil of pre-industrial (>150 years old) charcoal kilns in forest (4 sites) and cropland (5 sites). The topsoil of the adjacent charcoal-unaffected soils was sampled in a comparable way. Soils were characterized (pH, total, organic and inorganic C, total N, exchangeable Ca, Mg, K, Na, cation exchange capacity and available P) and natural soil organic matter (SOM) and black carbon (BC) contents were determined by differential scanning calorimetry. After rewetting at pF 2.5, soils were incubated during 140 days at 20 °C. At 70 days of incubation, 10 g of each soil were freeze dried in order to measure total microbial biomass and community structure by PLFA analysis. The PLFA dataset was analyzed by principal component analysis (PCA) while soil parameters were used as supplementary variables. For both agricultural and forest soils, the respiration rate is highly related to the total microbial biomass (R²=0.90). Both soil respiration and microbial biomass greatly depend on the SOM content, which indicates that the BC pool is relatively inert microbiologically. Land-use explains most of the variance in the PLFA dataset, largely governing the first principal component of the ACP. In forest soils, we observe a larger proportion of gram + bacteria, actinomycetes and an increased bacteria:fungi ratio compared to cropland, where gram

  16. Integrated-Circuit Active Digital Filter

    NASA Technical Reports Server (NTRS)

    Nathan, R.

    1986-01-01

    Pipeline architecture with parallel multipliers and adders speeds calculation of weighted sums. Picture-element values and partial sums flow through delay-adder modules. After each cycle or time unit of calculation, each value in filter moves one position right. Digital integrated-circuit chips with pipeline architecture rapidly move 35 X 35 two-dimensional convolutions. Need for such circuits in image enhancement, data filtering, correlation, pattern extraction, and synthetic-aperture-radar image processing: all require repeated calculations of weighted sums of values from images or two-dimensional arrays of data.

  17. Efficiency of automotive cabin air filters to reduce acute health effects of diesel exhaust in human subjects

    PubMed Central

    Rudell, B.; Wass, U.; Horstedt, P.; Levin, J. O.; Lindahl, R.; Rannug, U.; Sunesson, A. L.; Ostberg, Y.; Sandstrom, T.

    1999-01-01

    OBJECTIVES: To evaluate the efficiency of different automotive cabin air filters to prevent penetration of components of diesel exhaust and thereby reduce biomedical effects in human subjects. Filtered air and unfiltered diluted diesel exhaust (DDE) were used as negative and positive controls, respectively, and were compared with exposure to DDE filtered with four different filter systems. METHODS: 32 Healthy non- smoking subjects (age 21-53) participated in the study. Each subject was exposed six times for 1 hour in a specially designed exposure chamber: once to air, once to unfiltered DDE, and once to DDE filtered with the four different cabin air filters. Particle concentrations during exposure to unfiltered DDE were kept at 300 micrograms/m3. Two of the filters were particle filters. The other two were particle filters combined with active charcoal filters that might reduce certain gaseous components. Subjective symptoms were recorded and nasal airway lavage (NAL), acoustic rhinometry, and lung function measurements were performed. RESULTS: The two particle filters decreased the concentrations of diesel exhaust particles by about half, but did not reduce the intensity of symptoms induced by exhaust. The combination of active charcoal filters and a particle filter significantly reduced the symptoms and discomfort caused by the diesel exhaust. The most noticable differences in efficacy between the filters were found in the reduction of detection of an unpleasant smell from the diesel exhaust. In this respect even the two charcoal filter combinations differed significantly. The efficacy to reduce symptoms may depend on the abilities of the filters investigated to reduce certain hydrocarbons. No acute effects on NAL, rhinometry, and lung function variables were found. CONCLUSIONS: This study has shown that the use of active charcoal filters, and a particle filter, clearly reduced the intensity of symptoms induced by diesel exhaust. Complementary studies on vehicle

  18. Orthonormal filters for identification in active control systems

    NASA Astrophysics Data System (ADS)

    Mayer, Dirk

    2015-12-01

    Many active noise and vibration control systems require models of the control paths. When the controlled system changes slightly over time, adaptive digital filters for the identification of the models are useful. This paper aims at the investigation of a special class of adaptive digital filters: orthonormal filter banks possess the robust and simple adaptation of the widely applied finite impulse response (FIR) filters, but at a lower model order, which is important when considering implementation on embedded systems. However, the filter banks require prior knowledge about the resonance frequencies and damping of the structure. This knowledge can be supposed to be of limited precision, since in many practical systems, uncertainties in the structural parameters exist. In this work, a procedure using a number of training systems to find the fixed parameters for the filter banks is applied. The effect of uncertainties in the prior knowledge on the model error is examined both with a basic example and in an experiment. Furthermore, the possibilities to compensate for the imprecise prior knowledge by a higher filter order are investigated. Also comparisons with FIR filters are implemented in order to assess the possible advantages of the orthonormal filter banks. Numerical and experimental investigations show that significantly lower computational effort can be reached by the filter banks under certain conditions.

  19. Fusion reactor high vacuum pumping: Charcoal cryosorber tritium exposure results

    SciTech Connect

    Sedgley, D.W.; Walthers, C.R.; Jenkins, E.M. )

    1991-01-01

    Recent experiments, have shown the practically of using activated charcoal (coconut charcoal) at 4{degrees}K to pump helium and hydrogen isotopes for a fusion reactor. Both speed and capacity for deuterium/helium and tritium/helium-3 mixtures were shown to be satisfactory. The long term effects of tritium on the charcoal/cement system developed by Grumman and LLNL were not known and a program was undertaken to see what, if any, effect long term tritium exposure has on the cryosorber. Several charcoal on aluminum test samples were subjected to six months exposure of tritium at approximately 77{degrees}K. The tritium was scanned several times with a residual gas analyzer and the speed-capacity performance of the samples was measured before, approximately half way through and after the exposure. Modest effects were noted which would not seriously restrict charcoal's use as a cryosorber for fusion reactor high vacuum pumping applications. 4 refs., 8 figs.

  20. RECYCLE AND REUSE OF CHARCOAL MADE FROM EXCESS SLUDGE IN MEMBRANE BIOREACTOR

    NASA Astrophysics Data System (ADS)

    Tran, Tuyet Thi; Shafiquzzaman, Md.; Nakajima, Jun

    Charcoal produced from excess sludge appeared to be useful for removing SMP (soluble microbial products) in MBR (membrane bioreactors) and therefore for reducing membrane fouling. Batch experiments and long-term MBR experiments were performed by using charcoal made of actual excess sludge. In the batch experiments, SMP was removed effectively through charcoal addition. This approach proved especially effective for the removal of carbohydrate. Charcoal would serve as an absorbent and coagulant in SMP removal. High BOD (biochemical oxygen demand) removal efficiencies produced no negative effects on biological activity in the reactors during the long-term MBR experiments involving charcoal addition. The decrease of humic substances and COD (chemical oxygen demand) through charcoal addition suggested that this approach effectively enhanced the performance of activated sludge treatment. A charcoal addition of more than 0.1% in long-term MBR experiments effectively decreased the membrane fouling frequency. The use of charcoal therefore served to mitigate membrane fouling. A decrease in carbohydrate, corresponding to the increase in the mean fouling period, suggested that a charcoal addition of more than 0.1% effectively removed SMP, especially carbohydrate. A charcoal cyclic reuse system is also proposed. This system would involve charcoal production and charcoal addition to MBR.

  1. Survival of selected bacterial species in sterilized activated carbon filters and biological activated carbon filters.

    PubMed Central

    Rollinger, Y; Dott, W

    1987-01-01

    The survival of selected hygienically relevant bacterial species in activated carbon (AC) filters on a bench scale was investigated. The results revealed that after inoculation of the test strains the previously sterilized AC absorbed all bacteria (10(6) to 10(7)). After a period of 6 to 13 days without countable bacteria in the effluent, the numbers of Escherichia coli, Pseudomonas aeruginosa, and Pseudomonas putida increased up to 10(4) to 10(5) CFU/ml of effluent and 10(6) to 10(7) CFU/g of AC. When Klebsiella pneumoniae and Streptococcus faecalis were used, no growth in filters could be observed. The numbers of E. coli, P. aeruginosa, and P. putida, however, decreased immediately and showed no regrowth in nonsterile AC from a filter which had been continuously connected to running tap water for 2 months. Under these conditions an autochthonous microflora developed on the carbon surface which could be demonstrated by scanning electron microscopy and culturing methods (heterotrophic plate count). These bacteria reduced E. coli, P. aeruginosa, and P. putida densities in the effluent by a factor of more than 10(5) within 1 to 5 days. The hypothesis that antagonistic substances of the autochthonous microflora were responsible for the elimination of the artificial contamination could not be confirmed because less than 1% of the isolates of the autochthonous microflora were able to produce such substances as indicated by in vitro tests. Competition for limiting nutrients was thought to be the reason for the observed effects. PMID:3579281

  2. Commercial charcoal manufacture in Brazil

    SciTech Connect

    Rezende, M.E.; Lessa, A.; Pasa, V.; Sampaio, R.; Macedo, P.

    1993-12-31

    Brazil is the only country where charcoal has a major industrial us. Almost 40% of the pig iron and all the ferroalloys produced in the country are based on it and were established near Minas Gerais iron ore deposits using non-sustainable farm charcoal. Since the 1980s charcoal production from large eucalyptus forests is gradually increasing, accounting for 40% of the 8 million tonnes produced in 1991. Farm charcoal is produced when native forests are slashed to give way to farm land. Adequate techniques, labor rights or environmental concerns are not common in this scenario. In large eucalyptus forests charcoal production has a different business approach. Several kinds of masonry ovens are used in both scenarios. Continuous carbonization kilns are not feasible yet because of their high capital cost. The search for a new cheapest design or for the upgrading of the carbonization byproducts is a must. Promising results are shown. Plastics and fine chemicals were already obtained from wood tar. The first Brazilian pilot plant for wood tar fractionation will be started by 9/93. Ironworks have different profiles. Some plants are up-to-date integrated mini-steelworks. Others are small producers of pig ingots. They have in common the need to face coke ironmaking route. Brazilian exports of charcoal based iron and steel products have attained the goal until now. Future charcoal competitiveness will not be so easy. Although expertises believe that coke prices can not stand low for long time it poses additional difficulty to the Brazilian charcoal ironmaker. Three scenarios projected for the future of charcoal ironmaking show that as long as charcoal production costs are properly managed, charcoal will be competitive with coke. The authors defend a common research program that looks for technologies suited to the Brazilian reality.

  3. Measurement of the axial distribution of radioactivity in the auxiliary charcoal bed of the Molten Salt Reactor Experiment at ORNL

    SciTech Connect

    Miller, L.F.; Buckner, M.; Buchanan, M.

    1999-07-01

    The Molten Salt Reactor Experiment (MSRE) at Oak Ridge National Laboratory commenced operation in 1964 and was shut down in 1969. It was fueled with {sup 233}UF{sub 4} in a carrier salt of LiF-BeF{sub 2}-ZrF{sub 4}, and it operated at 1,200 F. After it was shut down, the fuel was heated annually to 200 C to recombine fluorine (with the fuel) released due to radiation-induced reactions in the fuel salt. However, a competing reaction oxidized uranium to UF{sub 6}, which was released (along with F{sub 2}) from the fuel and trapped in one of four charcoal filters in the auxiliary charcoal bed (ACB). One of the tasks for decommissioning of the MSRE requires that at least 90% of the estimated 3 kg of {sup 233}U, and radioactive decay products, in this filter be removed, and one of the proposed methods is to vacuum the charcoal above a specified axial position in the filter. This requires that the axial distribution of activity in the filter be measured in a 60 rad/h radiation field to determine where this penetration can be made. To accomplish this, the shielded detector with a pinhole collimator, and with a laser positioning capability, was remotely translated to various axial positions to accomplish these measurements. Activities in the steel screen, and various regions of the charcoal bed, are estimated, and uncertainties in these estimates are generally {lt}1%. Results from this analysis are used for continued operational decisions for decommissioning of the MSRE.

  4. Decolorization of crude latex by activated charcoal, purification and physico-chemical characterization of religiosin, a milk-clotting serine protease from the latex of Ficus religiosa.

    PubMed

    Kumari, Moni; Sharma, Anurag; Jagannadham, M V

    2010-07-14

    The crude latex of Ficus religiosa is decolorized by activated charcoal. Decolorization follows the Freundlich and Langmuir equations. A serine protease, named religiosin, has been purified to homogeneity from the decolorized latex using anion exchange chromatography. Religiosin is a glycoprotein with a molecular mass of 43.4 kDa by MALDI-TOF. Religiosin is an acidic protein with a pI value of 3.8 and acts optimally at pH 8.0-8.5 and temperature 50 degrees C. The proteolytic activity of religiosin is strongly inhibited by PMSF and chymostatin indicating that the enzyme is a serine protease. The extinction coefficient (epsilon(1%)(280)) of religiosin is 29.47 M(-1) cm(-1)with 16 tryptophan, 26 tyrosine, and 11 cysteine residues per molecule. The enzyme shows broad substrate specificity against natural as well as synthetic substrates with an apparent K(m) of 0.066 mM and 6.25 mM using casein and Leu-pNA, respectively. MS/MS analysis confirms the novelty of the enzyme. Religiosin is highly stable against denaturants, metal ions, and detergents as well as over a wide range of pH and temperature. In addition, the enzyme exhibits milk-clotting as well as detergent activity. PMID:20560603

  5. Comparison of the Extended Kalman Filter and the Unscented Kalman Filter for Magnetocardiography activation time imaging

    NASA Astrophysics Data System (ADS)

    Ahrens, H.; Argin, F.; Klinkenbusch, L.

    2013-07-01

    The non-invasive and radiation-free imaging of the electrical activity of the heart with Electrocardiography (ECG) or Magnetocardiography (MCG) can be helpful for physicians for instance in the localization of the origin of cardiac arrhythmia. In this paper we compare two Kalman Filter algorithms for the solution of a nonlinear state-space model and for the subsequent imaging of the activation/depolarization times of the heart muscle: the Extended Kalman Filter (EKF) and the Unscented Kalman Filter (UKF). The algorithms are compared for simulations of a (6×6) magnetometer array, a torso model with piecewise homogeneous conductivities, 946 current dipoles located in a small part of the heart (apex), and several noise levels. It is found that for all tested noise levels the convergence of the activation times is faster for the UKF.

  6. A simple method for vapor dosing of charcoal sorbent tubes.

    PubMed

    Thomas, M L; Cohen, B S

    1995-01-01

    A method for vapor-dosing of charcoal sorbent tubes (CST) that does not require the expense and effort of a test chamber was used to test the desorption efficiency (DE) of seven solvent vapors, representing six classes of solvents as follows: aromatic hydrocarbons (m-xylene); ether/alcohol (2-ethoxyethanol); vinyl monomers (styrene monomer, vinyl acetate); aliphatic hydrocarbons (n-hexane); aliphatic esters (n-butyl acetate); and aliphatic acrylic monomers (methyl methacrylate). The quantities of the solvents used in these experiments would represent eight-hour exposures to concentrations of approximately 0.2 to 10 ppm. The vapor-dosing experimental system consisted of a loaded filter cassette connected directly to a CST. Vapor was generated by injecting liquid solvent onto the glass fiber filter and drawing air through the system. The solvent was desorbed from the filter and charcoal for analysis. Vapor desorption efficiency was determined from the fraction of the injected solvent evaporated from the filter and the amount recovered from the charcoal. The measured DEs were similar to those reported for liquid dosed charcoal. Vapor dosing of sorbent tubes is more representative of samples collected for industrial hygiene exposure assessment. The system is simple to use and applicable for vapor dosing of any sorbent tube. PMID:7872204

  7. Fire history reconstruction in grassland ecosystems: amount of charcoal reflects local area burned

    NASA Astrophysics Data System (ADS)

    Leys, Bérangère; Brewer, Simon C.; McConaghy, Scott; Mueller, Joshua; McLauchlan, Kendra K.

    2015-11-01

    Fire is one of the most prevalent disturbances in the Earth system, and its past characteristics can be reconstructed using charcoal particles preserved in depositional environments. Although researchers know that fires produce charcoal particles, interpretation of the quantity or composition of charcoal particles in terms of fire source remains poorly understood. In this study, we used a unique four-year dataset of charcoal deposited in traps from a native tallgrass prairie in mid-North America to test which environmental factors were linked to charcoal measurements on three spatial scales. We investigated small and large charcoal particles commonly used as a proxy of fire activity at different spatial scales, and charcoal morphotypes representing different types of fuel. We found that small (125-250 μm) and large (250 μm-1 mm) particles of charcoal are well-correlated (Spearman correlation = 0.88) and likely reflect the same spatial scale of fire activity in a system with both herbaceous and woody fuels. There was no significant relationship between charcoal pieces and fire parameters <500 m from the traps. Moreover, local area burned (<5 km distance radius from traps) explained the total charcoal amount, and regional burning (200 km radius distance from traps) explained the ratio of non arboreal to total charcoal (NA/T ratio). Charcoal variables, including total charcoal count and NA/T ratio, did not correlate with other fire parameters, vegetation cover, landscape, or climate variables. Thus, in long-term studies that involve fire history reconstructions, total charcoal particles, even of a small size (125-250 μm), could be an indicator of local area burned. Further studies may determine relationships among amount of charcoal recorded, fire intensity, vegetation cover, and climatic parameters.

  8. Optimal Recursive Digital Filters for Active Bending Stabilization

    NASA Technical Reports Server (NTRS)

    Orr, Jeb S.

    2013-01-01

    In the design of flight control systems for large flexible boosters, it is common practice to utilize active feedback control of the first lateral structural bending mode so as to suppress transients and reduce gust loading. Typically, active stabilization or phase stabilization is achieved by carefully shaping the loop transfer function in the frequency domain via the use of compensating filters combined with the frequency response characteristics of the nozzle/actuator system. In this paper we present a new approach for parameterizing and determining optimal low-order recursive linear digital filters so as to satisfy phase shaping constraints for bending and sloshing dynamics while simultaneously maximizing attenuation in other frequency bands of interest, e.g. near higher frequency parasitic structural modes. By parameterizing the filter directly in the z-plane with certain restrictions, the search space of candidate filter designs that satisfy the constraints is restricted to stable, minimum phase recursive low-pass filters with well-conditioned coefficients. Combined with optimal output feedback blending from multiple rate gyros, the present approach enables rapid and robust parametrization of autopilot bending filters to attain flight control performance objectives. Numerical results are presented that illustrate the application of the present technique to the development of rate gyro filters for an exploration-class multi-engined space launch vehicle.

  9. Cr(VI) removal from synthetic wastewater using coconut shell charcoal and commercial activated carbon modified with oxidizing agents and/or chitosan.

    PubMed

    Babel, Sandhya; Kurniawan, Tonni Agustiono

    2004-02-01

    In this study, the technical feasibility of coconut shell charcoal (CSC) and commercial activated carbon (CAC) for Cr(VI) removal is investigated in batch studies using synthetic electroplating wastewater. Both granular adsorbents are made up of coconut shell (Cocos nucifera L.), an agricultural waste from local coconut industries. Surface modifications of CSC and CAC with chitosan and/or oxidizing agents, such as sulfuric acid and nitric acid, respectively, are also conducted to improve removal performance. The results of their Cr removal performances are statistically compared. It is evident that adsorbents chemically modified with an oxidizing agent demonstrate better Cr(VI) removal capabilities than as-received adsorbents in terms of adsorption rate. Both CSC and CAC, which have been oxidized with nitric acid, have higher Cr adsorption capacities (CSC: 10.88, CAC: 15.47 mg g(-1)) than those oxidized with sulfuric acid (CSC: 4.05, CAC: 8.94 mg g(-1)) and non-treated CSC coated with chitosan (CSCCC: 3.65 mg g(-1)), respectively, suggesting that surface modification of a carbon adsorbent with a strong oxidizing agent generates more adsorption sites on their solid surface for metal adsorption. PMID:14637353

  10. Recovery of datable charcoal beneath young lavas: lessons from Hawaii.

    USGS Publications Warehouse

    Lockwood, J.P.; Lipman, P.W.

    1980-01-01

    Field studies in Hawaii aimed at providing a radiocarbon-based chronology of prehistoric eruptive activity have led to a good understanding of the processes that govern the formation and preservation of charcoal beneath basaltic lava flows. Charcoal formation is a rate-dependent process controlled primarily by temperature and duration of heating, as well as by moisture content, density, and size of original woody material. Charcoal will form wherever wood buried by lava is raised to sufficiently high temperatures, but owing to the availability of oxygen it is commonly burned to ash soon after formation. Wherever oxygen circulation is sufficiently restricted, charcoal will be preserved, but where atmospheric oxygen circulates freely, charcoal will only be preserved at a lower temperature, below that required for charcoal ignition or catalytic oxidation. These factors cause carbonized wood, especially that derived from living roots, to be commonly preserved beneath all parts of pahoehoe flows (where oxygen circulation is restricted), but only under margins of aa. Practical guidelines are given for the recovery of datable charcoal beneath pahoehoe and aa. Although based on Hawaiian basaltic flows, the guidelines should be applicable to other areas. -Authors

  11. Active Integrated Filters for RF-Photonic Channelizers

    PubMed Central

    Nagdi, Amr El; Liu, Ke; LaFave, Tim P.; Hunt, Louis R.; Ramakrishna, Viswanath; Dabkowski, Mieczyslaw; MacFarlane, Duncan L.; Christensen, Marc P.

    2011-01-01

    A theoretical study of RF-photonic channelizers using four architectures formed by active integrated filters with tunable gains is presented. The integrated filters are enabled by two- and four-port nano-photonic couplers (NPCs). Lossless and three individual manufacturing cases with high transmission, high reflection, and symmetric couplers are assumed in the work. NPCs behavior is dependent upon the phenomenon of frustrated total internal reflection. Experimentally, photonic channelizers are fabricated in one single semiconductor chip on multi-quantum well epitaxial InP wafers using conventional microelectronics processing techniques. A state space modeling approach is used to derive the transfer functions and analyze the stability of these filters. The ability of adapting using the gains is demonstrated. Our simulation results indicate that the characteristic bandpass and notch filter responses of each structure are the basis of channelizer architectures, and optical gain may be used to adjust filter parameters to obtain a desired frequency magnitude response, especially in the range of 1–5 GHz for the chip with a coupler separation of ∼9 mm. Preliminarily, the measurement of spectral response shows enhancement of quality factor by using higher optical gains. The present compact active filters on an InP-based integrated photonic circuit hold the potential for a variety of channelizer applications. Compared to a pure RF channelizer, photonic channelizers may perform both channelization and down-conversion in an optical domain. PMID:22319352

  12. Facile xenon capture and release at room temperature using a metal-organic framework: a comparison with activated charcoal

    SciTech Connect

    Thallapally, Praveen K.; Grate, Jay W.; Motkuri, Radha K.

    2012-01-11

    Two well known Metal organic frameworks (MOF-5, NiDOBDC) were synthesized and studied for facile xenon capture and separation. Our results indicate the NiDOBDC adsorbs significantly more xenon than MOF-5, releases it more readily than activated carbon, and is more selective for Xe over Kr than activated carbon.

  13. Glutamate Mediated Astrocytic Filtering of Neuronal Activity

    PubMed Central

    Herzog, Nitzan; De Pittà, Maurizio; Jacob, Eshel Ben; Berry, Hugues; Hanein, Yael

    2014-01-01

    Neuron-astrocyte communication is an important regulatory mechanism in various brain functions but its complexity and role are yet to be fully understood. In particular, the temporal pattern of astrocyte response to neuronal firing has not been fully characterized. Here, we used neuron-astrocyte cultures on multi-electrode arrays coupled to Ca2+ imaging and explored the range of neuronal stimulation frequencies while keeping constant the amount of stimulation. Our results reveal that astrocytes specifically respond to the frequency of neuronal stimulation by intracellular Ca2+ transients, with a clear onset of astrocytic activation at neuron firing rates around 3-5 Hz. The cell-to-cell heterogeneity of the astrocyte Ca2+ response was however large and increasing with stimulation frequency. Astrocytic activation by neurons was abolished with antagonists of type I metabotropic glutamate receptor, validating the glutamate-dependence of this neuron-to-astrocyte pathway. Using a realistic biophysical model of glutamate-based intracellular calcium signaling in astrocytes, we suggest that the stepwise response is due to the supralinear dynamics of intracellular IP3 and that the heterogeneity of the responses may be due to the heterogeneity of the astrocyte-to-astrocyte couplings via gap junction channels. Therefore our results present astrocyte intracellular Ca2+ activity as a nonlinear integrator of glutamate-dependent neuronal activity. PMID:25521344

  14. Activated charcoal-mediated RNA extraction method for Azadirachta indica and plants highly rich in polyphenolics, polysaccharides and other complex secondary compounds

    PubMed Central

    2013-01-01

    Background High quality RNA is a primary requisite for numerous molecular biological applications but is difficult to isolate from several plants rich in polysaccharides, polyphenolics and other secondary metabolites. These compounds either bind with nucleic acids or often co-precipitate at the final step and many times cannot be removed by conventional methods and kits. Addition of vinyl-pyrollidone polymers in extraction buffer efficiently removes polyphenolics to some extent, but, it failed in case of Azadirachta indica and several other medicinal and aromatic plants. Findings Here we report the use of adsorption property of activated charcoal (0.03%–0.1%) in RNA isolation procedures to remove complex secondary metabolites and polyphenolics to yield good quality RNA from Azadirachta indica. We tested and validated our modified RNA isolation method across 21 different plants including Andrographis paniculata, Aloe vera, Rosa damascena, Pelargonium graveolens, Phyllanthus amarus etc. from 13 other different families, many of which are considered as tough system for isolating RNA. The A260/280 ratio of the extracted RNA ranged between 1.8-2.0 and distinct 28S and 18S ribosomal RNA bands were observed in denaturing agarose gel electrophoresis. Analysis using Agilent 2100 Bioanalyzer revealed intact total RNA yield with very good RNA Integrity Number. Conclusions The RNA isolated by our modified method was found to be of high quality and amenable for sensitive downstream molecular applications like subtractive library construction and RT-PCR. This modified RNA isolation procedure would aid and accelerate the biotechnological studies in complex medicinal and aromatic plants which are extremely rich in secondary metabolic compounds. PMID:23537338

  15. BIOLOGICAL ACTIVITY AND POTENTIAL REMEDIATION INVOLVING GEOTEXTILE LANDFILL LEACHATE FILTERS

    EPA Science Inventory

    This paper presents the results of a biological growth study in geotextile filters used in landfill leachate collection systems. fter reviewing the first year's activity, a completely new experimental approach has been taken. sing 100 mm diameter columns for the experimental incu...

  16. Development of active porous medium filters based on plasma textiles

    SciTech Connect

    Kuznetsov, Ivan A.; Saveliev, Alexei V.; Rasipuram, Srinivasan; Kuznetsov, Andrey V.; Brown, Alan; Jasper, Warren

    2012-05-15

    Inexpensive, flexible, washable, and durable materials that serve as antimicrobial filters and self-decontaminating fabrics are needed to provide active protection to people in areas regularly exposed to various biohazards, such as hospitals and bio research labs working with pathogens. Airlines and cruise lines need such material to combat the spread of infections. In households these materials can be used in HVAC filters to fight indoor pollution, which is especially dangerous to people suffering from asthma. Efficient filtering materials are also required in areas contaminated by other types of hazardous dust particulates, such as nuclear dust. The primary idea that guided the undertaken study is that a microplasma-generating structure can be embedded in a textile fabric to generate a plasma sheath (''plasma shield'') that kills bacterial agents coming in contact with the fabric. The research resulted in the development of a plasma textile that can be used for producing new types of self-decontaminating garments, fabrics, and filter materials, capable of activating a plasma sheath that would filter, capture, and destroy any bacteriological agent deposited on its surface. This new material relies on the unique antimicrobial and catalytic properties of cold (room temperature) plasma that is benign to people and does not cause thermal damage to many polymer textiles, such as Nomex and polypropylene. The uniqueness of cold plasma as a disinfecting agent lies in the inability of bacteria to develop resistance to plasma exposure, as they can for antibiotics. Plasma textiles could thus be utilized for microbial destruction in active antimicrobial filters (for continuous decontamination and disinfection of large amounts of air) as well as in self-decontaminating surfaces and antibacterial barriers (for example, for creating local antiseptic or sterile environments around wounds and burns).

  17. Development of active porous medium filters based on plasma textiles

    NASA Astrophysics Data System (ADS)

    Kuznetsov, Ivan A.; Saveliev, Alexei V.; Rasipuram, Srinivasan; Kuznetsov, Andrey V.; Brown, Alan; Jasper, Warren

    2012-05-01

    Inexpensive, flexible, washable, and durable materials that serve as antimicrobial filters and self-decontaminating fabrics are needed to provide active protection to people in areas regularly exposed to various biohazards, such as hospitals and bio research labs working with pathogens. Airlines and cruise lines need such material to combat the spread of infections. In households these materials can be used in HVAC filters to fight indoor pollution, which is especially dangerous to people suffering from asthma. Efficient filtering materials are also required in areas contaminated by other types of hazardous dust particulates, such as nuclear dust. The primary idea that guided the undertaken study is that a microplasma-generating structure can be embedded in a textile fabric to generate a plasma sheath ("plasma shield") that kills bacterial agents coming in contact with the fabric. The research resulted in the development of a plasma textile that can be used for producing new types of self-decontaminating garments, fabrics, and filter materials, capable of activating a plasma sheath that would filter, capture, and destroy any bacteriological agent deposited on its surface. This new material relies on the unique antimicrobial and catalytic properties of cold (room temperature) plasma that is benign to people and does not cause thermal damage to many polymer textiles, such as Nomex and polypropylene. The uniqueness of cold plasma as a disinfecting agent lies in the inability of bacteria to develop resistance to plasma exposure, as they can for antibiotics. Plasma textiles could thus be utilized for microbial destruction in active antimicrobial filters (for continuous decontamination and disinfection of large amounts of air) as well as in self-decontaminating surfaces and antibacterial barriers (for example, for creating local antiseptic or sterile environments around wounds and burns).

  18. Robust Kalman filter design for active flutter suppression systems

    NASA Technical Reports Server (NTRS)

    Garrard, W. L.; Mahesh, J. K.; Stone, C. R.; Dunn, H. J.

    1982-01-01

    Additional insight is provided into the use of the Doyle-Stein (1979, 1981) technique in aeroelastic control problems by examining the application of the method to a flutter control problem. The system to be controlled consists of a full-size wind tunnel model of a wing, plus an aileron, an actuator, and an accelerometer used to sense the motion of the wing. A full-state feedback controller was designed using linear optimal control theory, and a Kalman filter was used in the feedback loop for state estimation. The filter design procedure is explained along with that to improve closed-loop properties of the system. The locus of the poles of the filter is examined as a scalar design parameter is varied. The Doyle-Stein design procedure is shown to substantially improve the stability properties of an active flutter controller designed using the linear quadratic Gaussian control theory.

  19. Multi-channel Kalman filters for active noise control.

    PubMed

    van Ophem, S; Berkhoff, A P

    2013-04-01

    By formulating the feed-forward broadband active noise control problem as a state estimation problem it is possible to achieve a faster rate of convergence than the filtered reference least mean squares algorithm and possibly also a better tracking performance. A multiple input/multiple output Kalman algorithm is derived to perform this state estimation. To make the algorithm more suitable for real-time applications, the Kalman filter is written in a fast array form and the secondary path state matrices are implemented in output normal form. The resulting filter implementation is tested in simulations and in real-time experiments. It was found that for a constant primary path the filter has a fast rate of convergence and is able to track changes in the frequency spectrum. For a forgetting factor equal to unity the system is robust but the filter is unable to track rapid changes in the primary path. A forgetting factor lower than 1 gives a significantly improved tracking performance but leads to a numerical instability for the fast array form of the algorithm. PMID:23556580

  20. A review of DOE HEPA filter component test activities

    SciTech Connect

    Slawski, J.W.; Bresson, J.F.; Scripsick, R.C.

    1997-08-01

    All HEPA filters purchased for installation in DOE nuclear facilities are required to be tested at a Filter Test Facility (FTF) prior to installation. The number of HEPA filters purchased by DOE has been reduced so much that the Hanford FTF was closed. From Fiscal Year (FY) 1992 to 1994, funding was not provided to the FTF Technical Support Group (TSG) at the Los Alamos National Laboratory. As a consequence, Round Robin Tests (RRTs), performed twice each year by the FTFs to assess constituency of test results among the FTFs, were not performed in FY 1992 and FY 1993. The Annual Reports of FTF test activities were not prepared for FY 1992 - 1995. Technical support provided to the FTFs was minimal. There is talk of closing a second FTF, and ongoing discussions as to whether DOE will continue to fund operation of the FTFs. In FY 1994, DOE Defense Programs commenced funding the TSG. RRT data for FY 1994 and 1995 have been entered into the database; the FY 1994 RRT report has been issued; and the FY 1995 RRT report is in progress. Data from semiannual reports have been retrieved and entered into the database. Standards related to HEPA filter test and procurement activities are now scheduled for issuance by FY 1996. Continuation of these activities depends on whether DOE will continue to support the HEPA filter test program. The history and activities of the FTFs and the TSG at Los Alamos have been reported at previous Air Cleaning Conferences. Data from the FY 1991 Annual Report of FTF activities was presented at the 1992 Air Cleaning Conference. Preparation of the Annual Reports was temporarily suspended in 1992. However, all of the FTF Semiannual report data have been retrieved and entered into the data base. This paper focuses primarily on the results of HEPA filter tests conducted by FTFs during FY 1992 - FY 1995, and the possible effects of the DOE program uncertainties on the quality of HEPA filters for installation at the DOE sites. 15 refs., 13 tabs.

  1. Assessment of the capacity of vehicle cabin air inlet filters to reduce diesel exhaust-induced symptoms in human volunteers

    PubMed Central

    2014-01-01

    Background Exposure to particulate matter (PM) air pollution especially derived from traffic is associated with increases in cardiorespiratory morbidity and mortality. In this study, we evaluated the ability of novel vehicle cabin air inlet filters to reduce diesel exhaust (DE)-induced symptoms and markers of inflammation in human subjects. Methods Thirty healthy subjects participated in a randomized double-blind controlled crossover study where they were exposed to filtered air, unfiltered DE and DE filtered through two selected particle filters, one with and one without active charcoal. Exposures lasted for one hour. Symptoms were assessed before and during exposures and lung function was measured before and after each exposure, with inflammation assessed in peripheral blood five hours after exposures. In parallel, PM were collected from unfiltered and filtered DE and assessed for their capacity to drive damaging oxidation reactions in a cell-free model, or promote inflammation in A549 cells. Results The standard particle filter employed in this study reduced PM10 mass concentrations within the exposure chamber by 46%, further reduced to 74% by the inclusion of an active charcoal component. In addition use of the active charcoal filter was associated by a 75% and 50% reduction in NO2 and hydrocarbon concentrations, respectively. As expected, subjects reported more subjective symptoms after exposure to unfiltered DE compared to filtered air, which was significantly reduced by the filter with an active charcoal component. There were no significant changes in lung function after exposures. Similarly diesel exhaust did not elicit significant increases in any of the inflammatory markers examined in the peripheral blood samples 5 hour post-exposure. Whilst the filters reduced chamber particle concentrations, the oxidative activity of the particles themselves, did not change following filtration with either filter. In contrast, diesel exhaust PM passed through the

  2. Oral Activated Charcoal Prevents Experimental Cerebral Malaria in Mice and in a Randomized Controlled Clinical Trial in Man Did Not Interfere with the Pharmacokinetics of Parenteral Artesunate

    PubMed Central

    Alexander, Neal D.; Aziz, Naveed; Owens, Benjamin M. J.; Kaur, Harparkash; Jasseh, Momodou; Muangnoicharoen, Sant; Sumariwalla, Percy F.; Warhurst, David C.; Ward, Stephen A.; Conway, David J.; Ulloa, Luis; Tracey, Kevin J.; Foxwell, Brian M. J.; Kaye, Paul M.; Walther, Michael

    2010-01-01

    Background Safe, cheap and effective adjunct therapies preventing the development of, or reducing the mortality from, severe malaria could have considerable and rapid public health impact. Oral activated charcoal (oAC) is a safe and well tolerated treatment for acute poisoning, more recently shown to have significant immunomodulatory effects in man. In preparation for possible efficacy trials in human malaria, we sought to determine whether oAC would i) reduce mortality due to experimental cerebral malaria (ECM) in mice, ii) modulate immune and inflammatory responses associated with ECM, and iii) affect the pharmacokinetics of parenteral artesunate in human volunteers. Methods/Principal Findings We found that oAC provided significant protection against P. berghei ANKA-induced ECM, increasing overall survival time compared to untreated mice (p<0.0001; hazard ratio 16.4; 95% CI 6.73 to 40.1). Protection from ECM by oAC was associated with reduced numbers of splenic TNF+ CD4+ T cells and multifunctional IFNγ+TNF+ CD4+ and CD8+ T cells. Furthermore, we identified a whole blood gene expression signature (68 genes) associated with protection from ECM. To evaluate whether oAC might affect current best available anti-malarial treatment, we conducted a randomized controlled open label trial in 52 human volunteers (ISRCTN NR. 64793756), administering artesunate (AS) in the presence or absence of oAC. We demonstrated that co-administration of oAC was safe and well-tolerated. In the 26 subjects further analyzed, we found no interference with the pharmacokinetics of parenteral AS or its pharmacologically active metabolite dihydroartemisinin. Conclusions/Significance oAC protects against ECM in mice, and does not interfere with the pharmacokinetics of parenteral artesunate. If future studies succeed in establishing the efficacy of oAC in human malaria, then the characteristics of being inexpensive, well-tolerated at high doses and requiring no sophisticated storage would make o

  3. Autoclave inactivation of infectious radioactive laboratory waste contained within a charcoal filtration system.

    PubMed

    Stinson, M C; Green, B L; Marquardt, C J; Ducatman, A M

    1991-07-01

    A model system was developed previously for disposal of solid laboratory waste that is both radioactive and heat sensitive, e.g., HIV. A double polypropylene bag with charcoal vent filter and absorbent was designed to meet requirements for both steam sterilization and disposal as solid radioactive waste. Earlier work demonstrated the effective containment of radioactive gases by the filter and inactivation of organisms as heat sensitive as HIV. We sought to broaden the application of this model to ensure inactivation of microorganisms that are more heat resistant than HIV. The efficacy of steam sterilization using water or solutions of iodophor, hypochlorite, or hydrogen peroxide was studied under constant temperature and time conditions. The systems were monitored with internal probes, physical, chemical, and biological indicators. Biological indicators documented inactivation when bags containing hydrogen peroxide (3%) were autoclaved for 60 min at 121 degrees C. Synergistic activity between hydrogen peroxide and autoclave conditions significantly reduced processing time. PMID:2061040

  4. Autoclave inactivation of infectious radioactive laboratory waste contained within a charcoal filtration system

    SciTech Connect

    Stinson, M.C.; Green, B.L.; Marquardt, C.J.; Ducatman, A.M. )

    1991-07-01

    A model system was developed previously for disposal of solid laboratory waste that is both radioactive and heat sensitive, e.g., HIV. A double polypropylene bag with charcoal vent filter and absorbent was designed to meet requirements for both steam sterilization and disposal as solid radioactive waste. Earlier work demonstrated the effective containment of radioactive gases by the filter and inactivation of organisms as heat sensitive as HIV. The authors sought to broaden the application of this model to ensure inactivation of microorganisms that are more heat resistant than HIV. The efficacy of steam sterilization using water or solutions of iodophor, hypochlorite, or hydrogen peroxide was studied under constant temperature and time conditions. The systems were monitored with internal probes, physical, chemical, and biological indicators. Biological indicators documented inactivation when bags containing hydrogen peroxide (3%) were autoclaved for 60 min at 121C. Synergistic activity between hydrogen peroxide and autoclave conditions significantly reduced processing time.

  5. Removal of NOx or its conversion into harmless gases by charcoals and composites of metal oxides

    SciTech Connect

    Ishihara, Shigehisa; Furutsuka, Takeshi

    1996-12-31

    In recent years, much attention has been devoted to environmental problems such as acid rain, photochemical smog and water pollution. In particular, NOx emissions from factories, auto mobiles, etc. in urban areas have become worse. To solve these problems on environmental pollution on a global scale, the use of activated charcoal to reduce air pollutants is increasing. However, the capability of wood-based charcoal materials is not yet fully known. The removal of NOx or its conversion into harmless gases such as N{sub 2} should be described. In this study, the adsorption of NO over wood charcoal or metal oxide-dispersed wood charcoal was investigated. In particular, carbonized wood powder of Sugi (Cryptomeria japonica D. Don) was used to study the effectivity of using these materials in adsorbing NOx. Since wood charcoal is chemically stable, metal oxide with the ability of photocatalysis was dispersed into wood charcoal to improve its adsorption and capability to use the light energy effectively.

  6. Effects of quebracho tannin extract (Schinopsis balansae Engl.) and activated charcoal on nitrogen balance, rumen microbial protein synthesis and faecal composition of growing Boer goats.

    PubMed

    Al-Kindi, Amal; Dickhoefer, Uta; Schlecht, Eva; Sundrum, Albert; Schiborra, Anne

    2016-08-01

    Under irrigated arid conditions, organic fertiliser rich in slowly decomposable nitrogen (N) and carbon (C) is needed for soil fertility maintenance. Feeding ruminants with condensed tannins will lower ruminal protein degradation, reduce urinary N excretion and might increase the faecal fraction of slowly decomposable N. Supplementation with activated charcoal (AC) might enrich manure with slowly degrading C. Therefore, we investigated the effects of feeding quebracho tannin extract (QTE) and AC on the N balance of goats, the efficiency of microbial protein synthesis in the rumen (EMPS) and the composition of faeces. The feeding trial comprised three periods; in each period, 12 male Boer goats (28 ± 3.9 kg live weight) were assigned to six treatments: a Control diet (per kg diet 500 g grass hay and 500 g concentrate) and to further five treatments the Control diet was supplemented with QTE (20 g and 40 g/kg; diets QTE2 and QTE4, respectively), with AC (15 g and 30 g/kg, diets AC1.5 and AC3.0, respectively) and a mixture of QTE (20 g/kg) plus AC (15 g/kg) (diet QTEAC). In addition to the N balance, EMPS was calculated from daily excretions of purine derivatives, and the composition of faecal N was determined. There was no effect of QTE and AC supplementation on the intake of organic matter (OM), N and fibre, but apparent total tract digestibility of OM was reduced (p = 0.035). Feeding QTE induced a shift in N excretion from urine to faeces (p ≤ 0.001) without altering N retention. Total N excretion tended to decrease with QTE treatments (p = 0.053), but EMPS was not different between treatments. Faecal C excretion was higher in QTE and AC treatments (p = 0.001) compared with the Control, while the composition of faecal N differed only in concentration of undigested dietary N (p = 0.001). The results demonstrate that QTE can be included into diets of goats up to 40 g/kg, without affecting N utilisation, but simultaneously increasing the

  7. Hormonal activity, cytotoxicity and developmental toxicity of UV filters.

    PubMed

    Balázs, Adrienn; Krifaton, Csilla; Orosz, Ivett; Szoboszlay, Sándor; Kovács, Róbert; Csenki, Zsolt; Urbányi, Béla; Kriszt, Balázs

    2016-09-01

    Ultraviolet (UV) filters are commonly used compounds in personal care products and polymer based materials, as they can absorb solar energy in the UVA and UVB spectrum. However, they are able to bind to hormone receptors and have several and different types of hormonal activities determined by in vitro assays. One of the aims of this work was to measure the hormonal and cytotoxic activities of four frequently used UV filters using bioluminescence based yeast test organisms. Using Saccharomyces cerevisiae BLYES and BLYAS strains allowed the rapid and reliable detection of agonist and antagonist hormonal activities, whereas BLYR strain served to measure cytotoxicity. Results confirmed that all tested UV filters show multiple hormonal activities. Cytotoxicity is detected only in the case of benzophenone-3. Research data on the toxic effects of benzophenone-3, especially on aquatic organisms are scarce, so further investigations were carried out regarding its cytotoxic and teratogenic effects on bacteria and zebrafish (Danio rerio) embryos, respectively. Results revealed the cytotoxicity of benzophenone-3 not only to yeasts but to bacteria, as well as its ability to influence zebrafish embryo hatching and development. PMID:27208882

  8. Salts of the iodine oxyacids in the impregnation of adsorbent charcoal for trapping radioactive methyliodide

    DOEpatents

    Deitz, Victor R.; Blachly, Charles H.

    1977-04-05

    Radioactive iodine and radioactive methyliodide can be more than 99.7 per cent removed from the air stream of a nuclear reactor by passing the air stream through a 2-inch thick filter which is made up of impregnated charcoal prepared by contacting the charcoal with a solution containing KOH, iodine or an iodide, and an oxyacid, followed by contacting with a solution containing a tertiary amine.

  9. Development of charcoal sorbents for helium cryopumping

    SciTech Connect

    Sedgley, D.W.; Tobin, A.G.

    1984-01-01

    Testing of the cryogenically cooled charcoal using fusion-compatible binders for pumping helium has shown promising results. The program demonstrated comparable or improved performance with these binders compared to the charcoal (type and size) using an epoxy binder.

  10. DISEASES OF SOYBEAN: CHARCOAL ROT

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Soybean yield losses due to charcoal rot occur regularly. Yield losses of 20-30% due to root and stem infections of soybean caused by the soil-inhabiting fungus Macrophomina phaseolina have been reported in some fields in years highly favorable for disease development. This bulletin summarizes the...

  11. Comparative study of two structures of shunt active filter suppressing particular harmonics

    NASA Astrophysics Data System (ADS)

    Benchaita, L.; Salem Nia, A.; Saadate, S.

    1998-07-01

    This paper deals with the study of shunt active filters used for suppressing particular harmonics generated by nonlinear loads in utility distribution power systems. Both structures of shunt active filter, voltage source active filter (VSAF) and current source active filter (CSAF), are considered. The analytical study of specific harmonics identification in a given spectrum is first presented. For simulation as well as experimentation the nonlinear load is a conventional three phase thyristor rectifier and harmonics 5 and 7 are selected to be eliminated by active filter. The whole system consisting of the ac power supply network, the SCR rectifier and the shunt active filter (VSAF/CSAF) is then simulated. The simulation results are discussed and the efficiency of the two kinds of active filter are compared. Finally, for the first structure, VSAF, the simulation results are confirmed by experimental test realized by means of a fully digital control active power filter developed in our laboratory.

  12. Charcoal production in the Mopane woodlands of Mozambique: what are the trade-offs with other ecosystem services?

    PubMed

    Woollen, Emily; Ryan, Casey M; Baumert, Sophia; Vollmer, Frank; Grundy, Isla; Fisher, Janet; Fernando, Jone; Luz, Ana; Ribeiro, Natasha; Lisboa, Sá N

    2016-09-19

    African woodlands form a major part of the tropical grassy biome and support the livelihoods of millions of rural and urban people. Charcoal production in particular is a major economic activity, but its impact on other ecosystem services is little studied. To address this, our study collected biophysical and social datasets, which were combined in ecological production functions, to assess ecosystem service provision and its change under different charcoal production scenarios in Gaza Province, southern Mozambique. We found that villages with longer histories of charcoal production had experienced declines in wood suitable for charcoal, firewood and construction, and tended to have lower perceived availabilities of these services. Scenarios of future charcoal impacts indicated that firewood and woody construction services were likely to trade-off with charcoal production. However, even under the most extreme charcoal scenario, these services were not completely lost. Other provisioning services, such as wild food, medicinal plants and grass, were largely unaffected by charcoal production. To reduce the future impacts of charcoal production, producers must avoid increased intensification of charcoal extraction by avoiding the expansion of species and sizes of trees used for charcoal production. This is a major challenge to land managers and policymakers in the area.This article is part of the themed issue 'Tropical grassy biomes: linking ecology, human use and conservation'. PMID:27502380

  13. 40 CFR 60.2115 - What if I do not use a wet scrubber, fabric filter, activated carbon injection, selective...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ..., fabric filter, activated carbon injection, selective noncatalytic reduction, an electrostatic... filter, activated carbon injection, selective noncatalytic reduction, an electrostatic precipitator, or a... than a wet scrubber, activated carbon injection, selective noncatalytic reduction, fabric filter,...

  14. A spatio-temporal filter approach to synchronous brain activities.

    PubMed

    Nakagawa, T; Ohashi, A

    1980-01-01

    This paper presents a mathematical mechanism for neuronal synchronization in oscillatory brain activities on the basis of the layer structures with recurrent inhibition. To begin with, a linear theory reveals that the recurrent inhibition tends to cause a synchronous uniform oscillation if the loop delay increases, and that an oscillating neuron recruits neighboring neurons by delivering synchronous inputs through the recurrent inhibition loop if the frequency is that of the selfexcitatory oscillation. Then, a quasilinearized dual wave model (DWM), employing the two-sinusoids plus bias input describing functions (TSBDF), shows the competitive relationship between the synchronous oscillation and a spatial wave that is introduced to represent normal brain activity patterns. Results of computer simulations conform well to the predictions of the DWM. Thus, synchronous brain activities are suggested to be the result of the spatio-temporal filter characteristics of the brain layer structures, modified by the neural nonlinearity. PMID:7353063

  15. Carcinogenic PAH in waterpipe charcoal products

    PubMed Central

    Sepetdjian, Elizabeth; Saliba, Najat; Shihadeh, Alan

    2010-01-01

    Because narghile waterpipe (shisha, hooka) smoking normally involves the use of burning charcoal, smoke inhaled by the user contains constituents originating from the charcoal in addition to those from the tobacco. We have previously found that charcoal accounts for most of the polyaromatic hydrocarbons (PAH) and carbon monoxide in the smoke of the waterpipe, both of which are present in alarming quantities. Because charcoal manufacturing conditions favor formation of PAH, it is reasonable to assume that charcoal sold off the shelf may be contaminated by PAH residues. These residues may constitute a significant fraction of the PAH inhaled by the waterpipe user and those in her/his vicinity. We measured PAH residues on three kinds of raw waterpipe charcoal sampled from Beirut stores and cafés. We found that PAH residues in raw charcoal can account for more than half of the total PAH emitted in the mainstream and sidestream smoke, and about one sixth of the carcinogenic 5- and 6-ring PAH compounds. Total PAH content of the three charcoal types varied systematically by a factor of six from the charcoal with the least to the greatest PAH residue. These findings indicate the possibility of regulating charcoal carcinogen content. PMID:20807559

  16. Carcinogenic PAH in waterpipe charcoal products.

    PubMed

    Sepetdjian, Elizabeth; Saliba, Najat; Shihadeh, Alan

    2010-11-01

    Because narghile waterpipe (shisha, hooka) smoking normally involves the use of burning charcoal, smoke inhaled by the user contains constituents originating from the charcoal in addition to those from the tobacco. We have previously found that charcoal accounts for most of the polyaromatic hydrocarbons (PAH) and carbon monoxide in the smoke of the waterpipe, both of which are present in alarming quantities. Because charcoal manufacturing conditions favor formation of PAH, it is reasonable to assume that charcoal sold off the shelf may be contaminated by PAH residues. These residues may constitute a significant fraction of the PAH inhaled by the waterpipe user and those in her/his vicinity. We measured PAH residues on three kinds of raw waterpipe charcoal sampled from Beirut stores and cafés. We found that PAH residues in raw charcoal can account for more than half of the total PAH emitted in the mainstream and sidestream smoke, and about one sixth of the carcinogenic 5- and 6-ring PAH compounds. Total PAH content of the three charcoal types varied systematically by a factor of six from the charcoal with the least to the greatest PAH residue. These findings indicate the possibility of regulating charcoal carcinogen content. PMID:20807559

  17. Design of an input filter for power factor correction (PFC) AC to DC converters employing an active ripple cancellation

    SciTech Connect

    Lee, D.Y.; Cho, B.H.

    1996-12-31

    An active input filter for power factor correction (PFC) circuit employing ripple current cancellation is proposed to reduce the filter`s size and cost.Switching ripple current can be filtered by an active circuit from the line current. A single stage passive filter with the active filter compensation circuit, a high filter can be synthesized to meet the electromagnetic interference (EMI) and power factor requirements. Analysis of the active filter and design procedure are detailed. Simulation result is presented to verify the high order filter characteristics of proposed scheme.

  18. 40 CFR 60.2680 - What if I do not use a wet scrubber, fabric filter, activated carbon injection, selective...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ..., fabric filter, activated carbon injection, selective noncatalytic reduction, an electrostatic... use a wet scrubber, fabric filter, activated carbon injection, selective noncatalytic reduction, an... reduction, fabric filter, an electrostatic precipitator, or a dry scrubber or limit emissions in some...

  19. 40 CFR 60.2680 - What if I do not use a wet scrubber, fabric filter, activated carbon injection, selective...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ..., fabric filter, activated carbon injection, selective noncatalytic reduction, an electrostatic... use a wet scrubber, fabric filter, activated carbon injection, selective noncatalytic reduction, an... reduction, fabric filter, an electrostatic precipitator, or a dry scrubber or limit emissions in some...

  20. Commercial charcoal production in the Ibarapa district of southwestern Nigeria: forestry dividends and welfare implications.

    PubMed

    Salami, Kabiru K; Brieger, William R

    2010-01-01

    Logging activities have long provided both wood fuel and charcoal for household and commercial use in rural and urban communities in developing countries. However, logging problems range from deforestation to threatened household air quality from burning wood and charcoal. This exploratory case study triangulated 15 in-depth interviews among charcoal bulk buyers and the workers, observations of workers at two èédú (charcoal) commercial depots in Igbo-Ora and of workers in the forest, and review of studies in academic database. Three categories of people are working in the business ranging from the producers in the forests (alaake) to the bulk buyers (olowo) in the middle and the wholesalers (ajagunta) in the city. A small team of 4-8 people can produce three pickup truck loads of charcoal in 2 weeks, and a large team between 7-8 loads. The olowo and the alaake have associations, membership cards, and meet to discuss business progress and regulate members' economic behavior. Close to 35,000 bags of charcoal of 450 pickup trucks may make the journey weekly from Ibarapa. Overall, the charcoal business is informal, and the local people also frown at cutting any useful indigenous trees ascertaining that an individual's actions may affect the whole community. The role of community health educators is important in the dissemination of effects of deforestation through charcoal production. PMID:22192943

  1. Effects of Carbonization Parameters of Moso-Bamboo-Based Porous Charcoal on Capturing Carbon Dioxide

    PubMed Central

    Jhan, Jhih-Wei; Cheng, Yi-Ming; Cheng, Hau-Hsein

    2014-01-01

    This study experimentally analyzed the carbon dioxide adsorption capacity of Moso-bamboo- (Phyllostachys edulis-) based porous charcoal. The porous charcoal was prepared at various carbonization temperatures and ground into powders with 60, 100, and 170 meshes, respectively. In order to understand the adsorption characteristics of porous charcoal, its fundamental properties, namely, charcoal yield, ash content, pH value, Brunauer-Emmett-Teller (BET) surface area, iodine number, pore volume, and powder size, were analyzed. The results show that when the carbonization temperature was increased, the charcoal yield decreased and the pH value increased. Moreover, the bamboo carbonized at a temperature of 1000°C for 2 h had the highest iodine sorption value and BET surface area. In the experiments, charcoal powders prepared at various carbonization temperatures were used to adsorb 1.854% CO2 for 120 h. The results show that the bamboo charcoal carbonized at 1000°C and ground with a 170 mesh had the best adsorption capacity, significantly decreasing the CO2 concentration to 0.836%. At room temperature and atmospheric pressure, the Moso-bamboo-based porous charcoal exhibited much better CO2 adsorption capacity compared to that of commercially available 350-mesh activated carbon. PMID:25225639

  2. Time-dependent response of a charcoal bed to radon and water vapor in flowing air

    SciTech Connect

    Henkel, J.A.; Fentiman, A.W.; Blue, T.E.

    1995-12-31

    Extremely high airborne concentrations of radon gas may be encountered during the remediation of uranium mill tailings storage facilities. Radon is also a constituent of the off-gas of mill-tailing vitrification. An effective way to remove radon from either gas is to pass the gas through a packed bed containing activated charcoal. Measurements of radon concentrations in the environment using charcoal canisters were first described by George. Canisters similar to those used by George in his first experiments have become the U.S. Environmental Protection Agency`s (EPA`s) standard for measuring environmental radon and were described in the EPA protocol for environmental radon measurement. The dynamic behavior of EPA charcoal canisters has been previously described with a mathematical model for the kinetics of radon gas adsorption in air in the presence of water vapor. This model for charcoal canisters has been extended to large charcoal beds with flowing air containing radon and water vapor. The mathematical model for large charcoal beds can be used to evaluate proposed bed designs or to model existing beds. Parameters that affect the radon distribution within a charcoal bed that can be studied using the mathematical model include carrier gas relative humidity and flow velocity, and input radon concentration. In addition, the relative performances of several different charcoals can be studied, provided sufficient information about their adsorption, desorption, and diffusion constants is known.

  3. Charcoal kiln relicts - a favorable site for tree growth?

    NASA Astrophysics Data System (ADS)

    Buras, Allan; Hirsch, Florian; van der Maaten, Ernst; Takla, Melanie; Räbiger, Christin; Cruz Garcia, Roberto; Schneider, Anna; Raab, Alexandra; Raab, Thomas; Wilmking, Martin

    2015-04-01

    the German lowlands (e.g. Raab et al., 2015) and their potentially adverse effects on tree growth, these findings elucidate a yet unknown impact of past human activities on recent biological processes. Glaser, B., Haumaier, L., Guggenberger, G., and Zech, W., 2001: The 'Terra Preta' phenomenon: a model for sustainable agriculture in the humid tropics. Naturwissenschaften, 88, 37-41. Raab, A., Takla, M., Raab, T., Nicolay, A., Schneider, A., Rösler, H., Heußner, K.U., Bönisch, E., 2015. Pre-industrial charcoal production in Lower Lusatia (Brandenburg, Germany): Detection and evaluation of a large charcoal-burning field by combining archaeological studies, GIS-based analyses of shaded-relief maps and dendrochronological age determination. Quaternary International, doi: 10.1016/j.quaint.2014.09.041.

  4. Adaptive RSOV filter using the FELMS algorithm for nonlinear active noise control systems

    NASA Astrophysics Data System (ADS)

    Zhao, Haiquan; Zeng, Xiangping; He, Zhengyou; Li, Tianrui

    2013-01-01

    This paper presents a recursive second-order Volterra (RSOV) filter to solve the problems of signal saturation and other nonlinear distortions that occur in nonlinear active noise control systems (NANC) used for actual applications. Since this nonlinear filter based on an infinite impulse response (IIR) filter structure can model higher than second-order and third-order nonlinearities for systems where the nonlinearities are harmonically related, the RSOV filter is more effective in NANC systems with either a linear secondary path (LSP) or a nonlinear secondary path (NSP). Simulation results clearly show that the RSOV adaptive filter using the multichannel structure filtered-error least mean square (FELMS) algorithm can further greatly reduce the computational burdens and is more suitable to eliminate nonlinear distortions in NANC systems than a SOV filter, a bilinear filter and a third-order Volterra (TOV) filter.

  5. Voltage and Current Unbalance Compensation Using a Parallel Active Filter

    SciTech Connect

    Xu, Yan; Tolbert, Leon M; Kueck, John D; Rizy, D Tom

    2007-01-01

    A three-phase insulated gate bipolar transistor (IGBT)-based parallel active filter is used for current and/or voltage unbalance compensation. An instantaneous power theory is adopted for real-time calculation and control. Three control schemes, current control, voltage control, and integrated control are proposed to compensate the unbalance of current, voltage, or both. The compensation results of the different control schemes in unbalance cases (load unbalance or voltage source unbalance) are compared and analyzed. The simulation and experimental results show that the control schemes can compensate the unbalance in load current or in the voltage source. Different compensation objectives can be achieved, i.e., balanced and unity power factor source current, balanced and regulated voltage, or both, by choosing appropriate control schemes.

  6. Simplified Solutions for Activity Deposited on Moving Filter Media.

    PubMed

    Smith, David L; Chabot, George E

    2016-10-01

    Simplified numerical solutions for particulate activity viewed on moving filter continuous air monitors are developed. The monitor configurations include both rectangular window (RW) and circular window (CW) types. The solutions are demonstrated first for a set of basic airborne radioactivity cases, for a series of concentration pulses, and for indicating the effects of step changes in reactor coolant system (RCS) leakage for a pressurized water reactor. The method is also compared to cases from the prior art. These simplified solutions have additional benefits: They are easily adaptable to multiple radionuclides, they will accommodate collection and detection efficiencies that vary in known ways across the collection area, and they also ease the solution programming. PMID:27575345

  7. Pipeline active filter utilizing a booth type multiplier

    NASA Technical Reports Server (NTRS)

    Nathan, Robert (Inventor)

    1987-01-01

    Multiplier units of the modified Booth decoder and carry-save adder/full adder combination are used to implement a pipeline active filter wherein pixel data is processed sequentially, and each pixel need only be accessed once and multiplied by a predetermined number of weights simultaneously, one multiplier unit for each weight. Each multiplier unit uses only one row of carry-save adders, and the results are shifted to less significant multiplier positions and one row of full adders to add the carry to the sum in order to provide the correct binary number for the product Wp. The full adder is also used to add this product Wp to the sum of products .SIGMA.Wp from preceding multiply units. If m.times.m multiplier units are pipelined, the system would be capable of processing a kernel array of m.times.m weighting factors.

  8. Charcoal/Nitrogen Adsorption Cryocooler

    NASA Technical Reports Server (NTRS)

    Bard, Steven

    1987-01-01

    Refrigerator with no wear-related moving parts produces 0.5 W of cooling at 118 K. When fully developed, refrigerator needs no electrical power, and life expectancy of more than 10 yr, operates unattended to cool sensitive infrared detectors for long periods. Only moving parts in adsorption cryocooler are check valves. As charcoal is cooled in canister, gas pressure drops, allowing inlet check valve to open and admit more nitrogen. When canister is heated, pressure rises, closing inlet valve and eventually opening outlet valve.

  9. CHARCOAL-PRODUCING INDUSTRIES IN NORTHEASTERN BRAZIL

    EPA Science Inventory

    Charcoal workers in northeastern Brazil: Occupational risks and effects of exposure to wood smoke
    ABSTRACT
    Brazil has the largest production of charcoal in the world, which is used mostly in the iron and steel industries. In most of the production sites, the process is ba...

  10. Development of charcoal sorbents for helium cryopumping

    SciTech Connect

    Sedgley, D.W.; Tobin, A.G.

    1985-09-30

    Improved methods for cryopumping helium were developed for application to fusion reactors where high helium generation rates are expected. This study period evaluated charcoal particle size, bonding agent type and thickness, and substrate thickness. The optimum combination of charcoal, bond, and substrate was used to form a scaled-up panel for evaluation in the Tritium Systems Test Assembly (TSTA) at Los Alamos. The optimum combination is a 12 x 30 mesh coconut charcoal attached to a 0.48 cm thick copper substrate by a 0.015 cm thick silver phosphorus copper braze. A copper cement bond for attaching charcoal to a substrate was identified and tested. Helium pumping performance of this combination was comparable to that of the charcoal braze system. Environmental tests showed the charcoal's susceptibility to vacuum chamber contamination. Performance degradation followed exposure of ambient temperature charcoal to a vacuum for prolonged periods. Maintaining a liquid nitrogen-cooled shield between the charcoal and the source of contamination prevented this degradation. A combination of bake-out and LN shielding effected recovery of degraded performance.

  11. Efficacy of charcoal cathartic versus ipecac in reducing serum acetaminophen in a simulated overdose.

    PubMed

    McNamara, R M; Aaron, C K; Gemborys, M; Davidheiser, S

    1989-09-01

    The traditional role of gastric emptying as the initial step in the management of the poisoned patient has recently been questioned; immediate activated charcoal administration has been recommended by some. In the setting of acetaminophen overdose, ipecac-induced emesis may interfere with subsequent oral antidotal therapy. Therefore, we conducted a study to compare the efficacy of initial therapy with ipecac with therapy with activated charcoal-cathartic in a simulated acetaminophen overdosage. Ten healthy volunteers participated in a randomized, crossover trial. Subjects ingested 3.0 g acetaminophen, followed by either no intervention, 30 mL syrup of ipecac, or 50 g activated charcoal-sorbitol solution at one hour. Serial acetaminophen levels were determined at intervals over eight hours. Both interventions significantly reduced the area under the curve compared with control (P less than .05). When comparing ipecac with activated charcoal-cathartic, no significant difference was noted among these groups. PMID:2569851

  12. Development of narrow-band low-frequency active filters for DC railway vehicles

    SciTech Connect

    Weem, J. van der

    1994-12-31

    To avoid failures in the signalling systems of light-rail plants low frequency components of the line current may often not exceed specified limits. These limits are in the range of 0.1% of the line current. Presently the low frequency components are damped with passive filters. This paper proposes an active filter to reduce the low frequency components of the line current. A method for dimensioning a digital control algorithm for active filters, which are implemented in the railway vehicle, is presented. Time domain simulations are carried out. They predicted a good behaviour of the active filter for all kinds of vehicles and different realistic conditions. The active filter was realized with an IGBT-inverter and the filter algorithm was implemented in a microcontroller, to ensure a high flexibility. The measurements presented in this paper prove the validity of the simulations. 19 refs.

  13. Calibration of diffusion barrier charcoal detectors using a semi-empirical expression.

    PubMed

    Montero Cabrera, M E; Sujo, L Colmenero; Villalba, L; Peinado, J Sáenz; Jiménez, A Cano; Miranda, A López; Peraza, E F Herrera

    2003-10-01

    Several calibration settings of diffusion barrier charcoal canister (DBCC) detectors for measuring radon concentration in air were studied. A set of functions and graphs were developed for relations between radon concentration in air and adsorbed activity in DBCC, when calibrated in small chambers. Both the integration time for 10% of DBCC of a batch, and the radon adsorption coefficient for the activated charcoal used in these detectors, were determined. Thus, a semi-empirical expression for detector calibration was applied. PMID:14522237

  14. LOW ACTIVITY WASTE FEED SOLIDS CARACTERIZATION AND FILTERABILITY TESTS

    SciTech Connect

    McCabe, D.; Crawford, C.; Duignan, M.; Williams, M.; Burket, P.

    2014-04-03

    The primary treatment of the tank waste at the DOE Hanford site will be done in the Waste Treatment and Immobilization Plant (WTP) that is currently under construction. The baseline plan for the WTP Pretreatment facility is to treat the waste, splitting it into High Level Waste (HLW) feed and Low Activity Waste (LAW) feed. Both waste streams are then separately vitrified as glass and sealed in canisters. The LAW glass will be disposed onsite in the Integrated Disposal Facility (IDF). There are currently no plans to treat the waste to remove technetium in the WTP Pretreatment facility, so its disposition path is the LAW glass. Options are being explored to immobilize the LAW portion of the tank waste, i.e., the LAW feed from the WTP Pretreatment facility. Removal of {sup 99}Tc from the LAW Feed, followed by off-site disposal of the {sup 99}Tc, would eliminate a key risk contributor for the IDF Performance Assessment (PA) for supplemental waste forms, and has potential to reduce treatment and disposal costs. Washington River Protection Solutions (WRPS) is developing some conceptual flow sheets for LAW treatment and disposal that could benefit from technetium removal. One of these flowsheets will specifically examine removing {sup 99}Tc from the LAW feed stream to supplemental immobilization. The conceptual flow sheet of the {sup 99}Tc removal process includes a filter to remove insoluble solids prior to processing the stream in an ion exchange column, but the characteristics and behavior of the liquid and solid phases has not previously been investigated. This report contains results of testing of a simulant that represents the projected composition of the feed to the Supplemental LAW process. This feed composition is not identical to the aqueous tank waste fed to the Waste Treatment Plant because it has been processed through WTP Pretreatment facility and therefore contains internal changes and recycle streams that will be generated within the WTP process. Although

  15. MANUFACTURING FACILITY FOR ACTIVATED CARBON AND CERAMIC WATER FILTERS AT THE SONGHAI CENTER, BENIN

    EPA Science Inventory

    Ceramic filters will be manufactured at the Songhai Center in Porto-Novo, Benin for cost-effective drinking water treatment. The efficiency of the ceramic filters will be improved by adding activated carbon cartridges to remove organic and inorganic impurities. The activate...

  16. Activated soil filters (bio filters) for the elimination of xenobiotics (micro-pollutants) from storm- and waste waters.

    PubMed

    Bester, Kai; Schäfer, Daniel

    2009-06-01

    A technical scale (0.12 m3) activated soil filter (bio filter) has been used to eliminate diverse xenobiotics (organic micro-pollutants) such as organophosphate flame retardants, and -plasticisers, musk fragrances, DEHP, benzothiazoles and triclosan from water. Model experiments to treat combined sewer overflow, storm water and a post treatment of waste water were performed in controlled laboratory experiments. The indicator compounds were typical for waste water. Diverse chemical compound groups and a wide spectrum from the lipophilic (pKow=5.9) to the hydrophilic (pKow=2.6) were included. The system consisted of a layer with high organic content (with vegetation to prevent clogging), a sand filter and a gravel drainage layer. The organic layer was spiked with activated sludge to enhance biomass and biodegradation potential. Usually the elimination rates varied from 64% to 99%, with only one compound reaching as little as 17%. For a technical suitability assessment it was calculated how long these filters would be stable in eliminating organic compounds from water. The estimated operating times for such systems was found to be about 100 years for a stack height of 2 m a year in regard to most compounds in this study. PMID:19371921

  17. What can we tell from particle morphology in Mesozoic charcoal assemblages?

    NASA Astrophysics Data System (ADS)

    Crawford, Alastair; Belcher, Claire

    2015-04-01

    Sedimentary charcoal particles provide a valuable record of palaeofire activity on both human and geological timescales. Charcoal is both an unambiguous indicator of wildfire, and a means of preservation of plant material in an inert form; thus it records not only the occurrence and extent of wildfire, but also the species affected. While scanning electron microscopy can be usefully employed for precise taxonomic identification of charcoals, the time and cost associated with this limit the extent to which the technique is employed. Morphometric analysis of mesocharcoal particles (c. 125-1000 µm) potentially provides a simple method for obtaining useful information from optical microscopy images. Grass fires have been shown to produce mesocharcoal particles with a higher length-to-width ratio than woodland fuel sources. In Holocene archives, aspect ratio measurements are thus used to infer the broad taxonomic affinity of the burned vegetation. Since Mesozoic charcoals display similarly heterogeneous morphologies, we investigate whether there is a similar potential to infer the broad botanical affinities of Mesozoic charcoal assemblages from simple morphological metrics. We have used image analysis to analyse a range of Jurassic and Cretaceous sedimentary rocks representing different vegetation communities and depositional environments, and also to determine the range of charcoal particle morphologies which can be produced from different modern taxa under laboratory conditions. We find that modern charcoals break down into mesocharcoal particles of very variable aspect ratio, and this appears to be dependent on taxonomic position. Our analysis of fragmented laboratory-produced charcoals indicates that pteridophytes produce much more elongate particles than either conifers or non-grass angiosperms. We suggest that for charcoal assemblages that predate the evolution of grasses, high average aspect ratios may be a useful indicator of the burning of a pteridophyte

  18. 49 CFR 176.405 - Stowage of charcoal.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Stowage of charcoal. 176.405 Section 176.405... Materials § 176.405 Stowage of charcoal. (a) Before stowing charcoal Division 4.2 (flammable solid), UN 1361... petroleum product, a vegetable or animal oil, nitrate, or sulfur, must be removed. (b) Charcoal packed...

  19. 49 CFR 176.405 - Stowage of charcoal.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 2 2011-10-01 2011-10-01 false Stowage of charcoal. 176.405 Section 176.405... Materials § 176.405 Stowage of charcoal. (a) Before stowing charcoal Division 4.2 (flammable solid), UN 1361... petroleum product, a vegetable or animal oil, nitrate, or sulfur, must be removed. (b) Charcoal packed...

  20. 49 CFR 176.405 - Stowage of charcoal.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 2 2012-10-01 2012-10-01 false Stowage of charcoal. 176.405 Section 176.405... Materials § 176.405 Stowage of charcoal. (a) Before stowing charcoal Division 4.2 (flammable solid), UN 1361... petroleum product, a vegetable or animal oil, nitrate, or sulfur, must be removed. (b) Charcoal packed...

  1. 49 CFR 176.405 - Stowage of charcoal.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 2 2014-10-01 2014-10-01 false Stowage of charcoal. 176.405 Section 176.405... Materials § 176.405 Stowage of charcoal. (a) Before stowing charcoal Division 4.2 (flammable solid), UN 1361... petroleum product, a vegetable or animal oil, nitrate, or sulfur, must be removed. (b) Charcoal packed...

  2. 49 CFR 176.405 - Stowage of charcoal.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 2 2013-10-01 2013-10-01 false Stowage of charcoal. 176.405 Section 176.405... Materials § 176.405 Stowage of charcoal. (a) Before stowing charcoal Division 4.2 (flammable solid), UN 1361... petroleum product, a vegetable or animal oil, nitrate, or sulfur, must be removed. (b) Charcoal packed...

  3. Development of an incineration system for pulverized spent charcoal

    SciTech Connect

    Furukawa, Osamu; Shibata, Minoru; Kani, Koichi

    1995-12-31

    In the existing charcoal treatment system granular charcoal is charged directly into an incinerator together with other combustible waste. Since the combustion rate of the charcoal is slow in this system, there is a problem that unburnt charcoal accumulates at the bottom of the incinerator, when incineration is performed for an extended period of time. To prevent this difficulty, the combustion rate of the charcoal must be limited to 6 kg/h. To increase the incineration rate of charcoal, the authors have developed a system in which the charcoal is pulverized and incinerated while it is mixed with propane gas. The operational performance of this system was tested using an actual equipment.

  4. Should we do early and frequent charcoal hemoperfusion in phenytoin toxicity?

    PubMed

    Sahoo, Jyoti Narayan; Gurjar, Mohan

    2016-02-01

    Phenytoin toxicity or adverse drug reaction is common due to its narrow therapeutic window. Mild and moderate toxicity require supportive care and enteral activated charcoal. In severe toxicity, charcoal hemoperfusion (CHP) have been shown to decrease serum phenytoin half-life and early recovery. Here, we report two cases with phenytoin toxicity who showed marked clinical improvement after early and frequent CHP treatment. PMID:27076716

  5. Should we do early and frequent charcoal hemoperfusion in phenytoin toxicity?

    PubMed Central

    Sahoo, Jyoti Narayan; Gurjar, Mohan

    2016-01-01

    Phenytoin toxicity or adverse drug reaction is common due to its narrow therapeutic window. Mild and moderate toxicity require supportive care and enteral activated charcoal. In severe toxicity, charcoal hemoperfusion (CHP) have been shown to decrease serum phenytoin half-life and early recovery. Here, we report two cases with phenytoin toxicity who showed marked clinical improvement after early and frequent CHP treatment. PMID:27076716

  6. Mechanically robust, chemically inert superhydrophobic charcoal surfaces.

    PubMed

    Xie, Jian-Bo; Li, Liang; Knyazeva, Anastassiya; Weston, James; Naumov, Panče

    2016-08-11

    We report a fast and cost-effective strategy towards the preparation of superhydrophobic composites where a double-sided adhesive tape is paved with charcoal particles. The composites are mechanically robust, and resistant to strong chemical agents. PMID:27405255

  7. Mapping the Legacies of Historic Charcoal Production

    NASA Astrophysics Data System (ADS)

    Schneider, A.; Raab, A.; Raab, T. A.; Takla, M.; Nicolay, A.; Rösler, H.

    2014-12-01

    The historic production of charcoal is an important component of the late Holocene fire history for many landscapes. Charcoal production can have numerous effects on ecosystems, e.g., through changes in forest area and structure, or through the effects of pyrolysis, charcoal and ash addition to soils. To assess such effects, it is necessary to understand the spatial extent and patterns of historic charcoal production, which has so far hardly been approached for the Northern European Lowlands. In the forefield of the open-cast mine Jänschwalde (north of Cottbus, Germany), archaeological excavations have revealed one of the largest charcoal production fields described so far. For this area, we applied and evaluated different methods for mapping the spatial distribution of charcoal kiln remains. We present methods and results of our work in this exceptionally well-described charcoal production field and of additional studies on kiln site distribution in regions of the Northern European Lowlands. The large-scale excavations in the mine forefield provide exact information on kiln site geometry. Using airborne laser scanning elevation models, the mapping of kiln sites could be extended to areas beyond the mine forefield. To detect kiln sites for larger areas, an automated GIS based mapping routine, based on a combination of morphometric parameters, was developed and evaluated. By manual digitization from Shaded Relief Maps, more than 5000 kiln sites in an area of 32 km2 were detected in the Jänschwalde mine forefield, with 1355 kiln sites that are wider than 12 m. These relatively large kiln sites could be mapped with detection rates that are close to those of manual digitization using the automated routine. First results for different study areas indicate that charcoal production is a so far underestimated component of the land use history in many parts of the Northern European Lowlands.

  8. Soil charcoal to assess the impacts of past human disturbances on tropical forests.

    PubMed

    Vleminckx, Jason; Morin-Rivat, Julie; Biwolé, Achille B; Daïnou, Kasso; Gillet, Jean-François; Doucet, Jean-Louis; Drouet, Thomas; Hardy, Olivier J

    2014-01-01

    The canopy of many central African forests is dominated by light-demanding tree species that do not regenerate well under themselves. The prevalence of these species might result from ancient slash-and-burn agricultural activities that created large openings, while a decline of these activities since the colonial period could explain their deficit of regeneration. To verify this hypothesis, we compared soil charcoal abundance, used as a proxy for past slash-and-burn agriculture, and tree species composition assessed on 208 rainforest 0.2 ha plots located in three areas from Southern Cameroon. Species were classified in regeneration guilds (pioneer, non-pioneer light-demanding, shade-bearer) and characterized by their wood-specific gravity, assumed to reflect light requirement. We tested the correlation between soil charcoal abundance and: (i) the relative abundance of each guild, (ii) each species and family abundance and (iii) mean wood-specific gravity. Charcoal was found in 83% of the plots, indicating frequent past forest fires. Radiocarbon dating revealed two periods of fires: "recent" charcoal were on average 300 years old (up to 860 BP, n = 16) and occurred in the uppermost 20 cm soil layer, while "ancient" charcoal were on average 1900 years old (range: 1500 to 2800 BP, n = 43, excluding one sample dated 9400 BP), and found in all soil layers. While we expected a positive correlation between the relative abundance of light-demanding species and charcoal abundance in the upper soil layer, overall there was no evidence that the current heterogeneity in tree species composition can be explained by charcoal abundance in any soil layer. The absence of signal supporting our hypothesis might result from (i) a relatively uniform impact of past slash-and-burn activities, (ii) pedoturbation processes bringing ancient charcoal to the upper soil layer, blurring the signal of centuries-old Human disturbances, or (iii) the prevalence of other environmental

  9. Fluidized bed charcoal particle production system

    SciTech Connect

    Sowards, N.K.

    1985-04-09

    A fluidized bed charcoal particle production system, including apparatus and method, wherein pieces of combustible waste, such as sawdust, fragments of wood, etc., are continuously disposed within a fluidized bed of a pyrolytic vessel. Preferably, the fluidized bed is caused to reach operating temperatures by use of an external pre-heater. The fluidized bed is situated above an air delivery system at the bottom of the vessel, which supports pyrolysis within the fluidized bed. Charcoal particles are thus formed within the bed from the combustible waste and are lifted from the bed and placed in suspension above the bed by forced air passing upwardly through the bed. The suspended charcoal particles and the gaseous medium in which the particles are suspended are displaced from the vessel into a cyclone mechanism where the charcoal particles are separated. The separated charcoal particles are quenched with water to terminate all further charcoal oxidation. The remaining off-gas is burned and, preferably, the heat therefrom used to generate steam, kiln dry lumber, etc. Preferably, the bed material is continuously recirculated and purified by removing tramp material.

  10. THE COUPLED TRICKLING FILTER-ACTIVATED SLUDGE PROCESS: DESIGN AND PERFORMANCE

    EPA Science Inventory

    A case history report was prepared on the upgrading of the Livermore, California, Water Reclamation Plant from a conventional trickling filter plant with tertiary oxidation ponds to a coupled trickling filter-activated sludge plant producing a nitrified effluent low in BOD5, susp...

  11. Investigating the fate of saxitoxins in biologically active water treatment plant filters

    SciTech Connect

    Kayal, N.; Newcombe, G.; Ho, L.

    2008-12-15

    The saxitoxins are potent neurotoxins, which can be produced by freshwater cyanobacteria. This study assessed the fate of five saxitoxins variants through biologically active laboratory filters containing media sourced from the filters beds of two water treatment plants (WTPs). Decreases in the concentration of the less toxic variants coincided with increases in the concentrations of the more toxic variants through the filters containing anthracite sourced from two different WTPs. No changes in toxin concentrations were evident through parallel filters containing sand. The results strongly suggest that organisms within the biofilm of the anthracite filters possessed the ability to biotransform the saxitoxins variants, which has important implications for drinking water treatment, particularly since this has the potential to increase the toxicity of the filtered water.

  12. Comparing modelled fire dynamics with charcoal records for the Holocene

    NASA Astrophysics Data System (ADS)

    Brücher, Tim; Brovkin, Victor; Kloster, Silvia; Marlon, Jennifer; Power, Mitch

    2014-05-01

    An Earth System model of intermediate complexity, CLIMBER-2, and land surface model JSBACH that includes dynamic vegetation, carbon cycle, and fire regime are used for simulation of natural fire dynamics through the last 8,000 years. To compare the fire model results with the charcoal reconstructions, several output variables of the fire model (burned area, carbon emissions) and several approaches of model output processing are tested. The z-scores out of charcoal dataset have been calculated for the period 8,000 to 200 BP to exclude a period of strong anthropogenic forcing during the last two centuries. The model analysis points mainly to an increasing fire activity during the Holocene for most of the investigated areas, which is in good correspondence to reconstructed fire trends out of charcoal data for most of the tested regions, while for few regions such as Europe the simulated trend and the reconstructed trends are different. The difference between the modeled and reconstructed fire activity could be due to absence of the anthropogenic forcing in the model simulations, but also due to limitations of model assumptions for modeling fire dynamics. For the model trends, the usage of averaging or z-score processing of model output resulted in similar directions of trend. Therefore, the approach of fire model output processing does not effect results of the model-data comparison. Global fire modeling is still in its infancy; improving our representations of fire through validation exercises such as what we present here is thus essential before testing hypotheses about the effects of extreme climate changes on fire behavior and potential feedbacks that result from those changes. Brücher, T., Brovkin, V., Kloster, S., Marlon, J. R., and Power, M. J.: Comparing modelled fire dynamics with charcoal records for the Holocene, Clim. Past Discuss., 9, 6429-6458, doi:10.5194/cpd-9-6429-2013, 2013.

  13. Active Cancellation of Acoustical Resonances with an FPGA FIR Filter

    NASA Astrophysics Data System (ADS)

    Ryou, Albert; Simon, Jonathan

    2016-05-01

    We demonstrate a novel approach to enhancing the closed-loop bandwidth of a feedback-controlled mechanical system by digitally cancelling its acoustical resonances and antiresonances with an FPGA FIR filter. By performing a real-time convolution of the feedback error signal with an arbitrary filter, we can suppress arbitrarily many poles and zeros below 100 kHz, each with a linewidth as small as 10 Hz. We demonstrate the efficacy of this technique by cancelling the six largest resonances and antiresonances of a high-finesse optical resonator piezomechanical transfer function, thereby enhancing the unity gain frequency by more than an order of magnitude. More broadly, this approach is applicable to stabilization of optical resonators, external cavity diode lasers, and scanning tunneling microscopes.

  14. Integrating powdered activated carbon into wastewater tertiary filter for micro-pollutant removal.

    PubMed

    Hu, Jingyi; Aarts, Annelies; Shang, Ran; Heijman, Bas; Rietveld, Luuk

    2016-07-15

    Integrating powdered activated carbon (PAC) into wastewater tertiary treatment is a promising technology to reduce organic micro-pollutant (OMP) discharge into the receiving waters. To take advantage of the existing tertiary filter, PAC was pre-embedded inside the filter bed acting as a fixed-bed adsorber. The pre-embedding (i.e. immobilization) of PAC was realized by direct dosing a PAC solution on the filter top, which was then promoted to penetrate into the filter media by a down-flow of tap water. In order to examine the effectiveness of this PAC pre-embedded filter towards OMP removal, batch adsorption tests, representing PAC contact reactor (with the same PAC mass-to-treated water volume ratio as in the PAC pre-embedded filter) were performed as references. Moreover, as a conventional dosing option, PAC was dosed continuously with the filter influent (i.e. the wastewater secondary effluent with the investigated OMPs). Comparative results confirmed a higher OMP removal efficiency associated with the PAC pre-embedded filter, as compared to the batch system with a practical PAC residence time. Furthermore, over a filtration period of 10 h (approximating a realistic filtration cycle for tertiary filters), the continuous dosing approach resulted in less OMP removal. Therefore, it was concluded that the pre-embedding approach can be preferentially considered when integrating PAC into the wastewater tertiary treatment for OMP elimination. PMID:27082256

  15. New emission controls for Missouri batch-type charcoal kilns

    SciTech Connect

    Yronwode, P.; Graf, W.J.

    1999-07-01

    Charcoal kilns have been exempted from air emission regulation in the state of Missouri. Today, 80% of US charcoal production takes place in Missouri. As a result of a petition filed by people in the area around an installation in southern Missouri, the US Environmental Protection Agency (EPA) set up air monitors and measured ambient air levels at that charcoal manufacturing installation. These monitors yielded the highest particulate matter less than 10 micron (PM{sub 10}) levels ever recorded in the state. Earlier stack testing at another charcoal manufacturing installation indicated that toxics and carcinogens are present in charcoal kiln air emissions. A Charcoal Kiln Workgroup was formed to determine the Best Available Control Technology (BACT) for charcoal kilns and to draft a charcoal kiln rule that requires BACT. The BACT report determined that afterburners were suitable for controlling emissions from batch-type charcoal kilns. In addition, the charcoal industry supported incorporating the BACT limits and requirements into an enforceable state rule and submitting this rule to the EPA for federal approval. A consent agreement between the EPA and three major charcoal companies was signed with provisions to install, operate, and maintain emission control devices on charcoal kilns. This agreement was to settle complaints alleging that the three major charcoal producers had failed to report toxic air emissions to federal and state regulators. The agreement provided that industry would install control devices on a set schedule with some charcoal kilns being shut down.

  16. Adsorption of dimethyl sulfide from aqueous solution by a cost-effective bamboo charcoal.

    PubMed

    Wang, Ming; Huang, Zheng-Hong; Liu, Guangjia; Kang, Feiyu

    2011-06-15

    The adsorption of dimethyl sulfide from an aqueous solution by a cost-effective bamboo charcoal from Dendrocalamus was studied in comparison with other carbon adsorbents. The bamboo charcoal exhibited superior adsorption on dimethyl sulfide compared with powdered activated carbons at different adsorbent dosages. The adsorption characteristics of dimethyl sulfide onto bamboo charcoal were investigated under varying experimental conditions such as particle size, contact time, initial concentration and adsorbent dosage. The dimethyl sulfide removal was enhanced from 31 to 63% as the particle size was decreased from 24-40 to >300 mesh for the bamboo charcoal. The removal efficiency increased with increasing the adsorbent dosage from 0.5 to 10mg, and reached 70% removal efficiency at 10mg adsorbed. The adsorption capacity (μg/g) increased with increasing concentration of dimethyl sulfide while the removal efficiency decreased. The adsorption process conforms well to a pseudo-second-order kinetics model. The adsorption of dimethyl sulfide is more appropriately described by the Freundlich isotherm (R(2), 0.9926) than by the Langmuir isotherm (R(2), 0.8685). Bamboo charcoal was characterized by various analytical methods to understand the adsorption mechanism. Bamboo charcoal is abundant in acidic and alcohol functional groups normally not observed in PAC. A distinct difference is that the superior mineral composition of Fe (0.4 wt%) and Mn (0.6 wt%) was detected in bamboo charcoal-elements not found in PAC. Acidic functional group and specific adsorption sites would be responsible for the strong adsorption of dimethyl sulfide onto bamboo charcoal of Dendrocalamus origin. PMID:21549503

  17. Post-Flight Sampling and Loading Characterization of Trace Contaminant Control Subassembly Charcoal

    NASA Technical Reports Server (NTRS)

    Perry, J. L.; Cole, H. E.; Cramblitt, E. L.; El-Lessy, H. N.; Manuel, S.; Tucker, C. D.

    2003-01-01

    Trace chemical contaminants produced by equipment offgassing and human metabolic processes are removed from the atmosphere of the International Space Station s U.S. Segment by a trace contaminant control subassembly (TCCS). The TCCS employs a combination of physical adsorption, thermal catalytic oxidation, and chemical adsorption processes to accomplish its task. A large bed of granular activated charcoal is a primary component of the TCCS. The charcoal contained in this bed, known as the charcoal bed assembly (CBA), is expendable and must be replaced periodically. Pre-flight engineering analyses based upon TCCS performance testing results established a service life estimate of 1 year. After nearly 1 year of cumulative in-flight operations, the first CBA was returned for refurbishment. Charcoal samples were collected and analyzed for loading to determine the best estimate for the CBAs service life. A history of in-flight TCCS operations is presented as well as a discussion of the charcoal sampling procedures and chemical analysis results. A projected service life derived from the observed charcoal loading is provided. Recommendations for better managing TCCS resources are presented.

  18. Implementation of FFT Algorithm using DSP TMS320F28335 for Shunt Active Power Filter

    NASA Astrophysics Data System (ADS)

    Patel, Pinkal Jashvantbhai; Patel, Rajesh M.; Patel, Vinod

    2016-07-01

    This work presents simulation, analysis and experimental verification of Fast Fourier Transform (FFT) algorithm for shunt active power filter based on three-level inverter. Different types of filters can be used for elimination of harmonics in the power system. In this work, FFT algorithm for reference current generation is discussed. FFT control algorithm is verified using PSIM simulation results with DLL block and C-code. Simulation results are compared with experimental results for FFT algorithm using DSP TMS320F28335 for shunt active power filter application.

  19. Impact of temperature on nitrification in biological activated carbon (BAC) filters used for drinking water treatment.

    PubMed

    Andersson, A; Laurent, P; Kihn, A; Prévost, M; Servais, P

    2001-08-01

    The impact of temperature on nitrification in biological granular activated carbon (GAC) filters was evaluated in order to improve the understanding of the nitrification process in drinking water treatment. The study was conducted in a northern climate where very cold water temperatures (below 2 degrees C) prevail for extended periods and rapid shifts of temperature are frequent in the spring and fall. Ammonia removals were monitored and the fixed nitrifying biomass was measured using a method of potential nitrifying activity. The impact of temperature was evaluated on two different filter media: an opened superstructure wood-based activated carbon and a closed superstructure activated carbon-based on bituminous coal. The study was conducted at two levels: pilot scale (first-stage filters) and full-scale (second-stage filters) and the results indicate a strong temperature impact on nitrification activity. Ammonia removal capacities ranged from 40 to 90% in pilot filters, at temperatures above 10 degrees C, while more than 90% ammonia was removed in the full-scale filters for the same temperature range. At moderate temperatures (4-10 degrees C), the first stage pilot filters removed 10-40% of incoming ammonia for both media (opened and closed superstructure). In the full-scale filters, a difference between the two media in nitrification performances was observed at moderate temperatures: the ammonia removal rate in the opened superstructure support (more than 90%) was higher than in the closed superstructure support (45%). At low temperatures (below 4 degrees C) both media performed poorly. Ammonia removal capacities were below 30% in both pilot- and full-scale filters. PMID:11471692

  20. ACTIVE FILTER HARDWARE DESIGN & PERFORMANCE FOR THE DIII-D PLASMA CONTROL SYSTEM

    SciTech Connect

    SELLERS,D; FERRON,J.R; WALKER,M.L; BROESCH,J.D

    2003-10-01

    OAK-B135 The digital plasma control system (PCS), currently in operation on the DIII-D tokamak, requires inputs from a large number of sensors. Due to the nature of the digitizers and the relative noisy environment from which these signals are derived, each of the 32 signals must be conditioned via an active filter. Two different types of filters, Chebyshev and Bessel with fixed frequencies: 100 Hz Bessel was used for filtering the motional Stark effect diagnostic data. 800 Hz Bessel was designed to filter plasma control data and 1200 Hz Chebyshev is used with closed loop control of choppers. The performance of the plasma control system is greatly influenced by how well the actual filter responses match the software model used in the control system algorithms. This paper addresses the various issues facing the designer in matching the electrical design with the theoretical.

  1. Effect of Charcoal Volatile Matter Content and Feedstock on Soil Microbe-Carbon-Nitrogen Dynamics

    NASA Astrophysics Data System (ADS)

    McClellan, T.; Deenik, J. L.; Hockaday, W. C.; Campbell, S.; Antal, M. J., Jr.

    2010-12-01

    Charcoal has important biogeochemical implications in soil—first as a means to sequester carbon, and second as a soil conditioner to potentially enhance soil quality and fertility. Volatile matter (VM) content is a property of charcoal which describes its degree of thermal alteration, or carbonization. Results from greenhouse experiments have shown that plant growth can be negatively affected by charcoals with high VM content (20-35%), with and without fertilizer supplements, whereas low VM charcoal (6-9%) increased plant growth when combined with fertilizer. We conducted two laboratory studies to characterize the VM content of charcoals derived from two feedstocks (corncob and kiawe) and relate observed differences to key aspects of soil fertility. Using Fourier transform infrared spectroscopy (FTIR), 13C nuclear magnetic resonance (NMR), total phenol content (using a Prussian blue colorimetric assay), and gas chromatography-mass spectrometry (GC-MS), we found that the VM content of charcoal primarily consisted of alkanes, oxygen-substituted alkanes, and phenolic compounds. However, the GC-MS data indicated that charcoals can differ vastly in their extractable fraction, depending upon both VM content and feedstock. In a second set of experiments, we examined the effect of VM content and feedstock on soil microbial activity, available nitrogen (N), and soluble carbon (C). High VM corncob charcoals significantly enhanced microbial activity, coupled with net reduction in available N and soluble C. For a given feedstock, the extent of this effect was dependent upon VM content. However, the overall effect of VM content on microbial dynamics was apparently related to the composition of the acetone-extractable fraction, which was particularly important when comparing two charcoals derived from different feedstocks but with the equivalent VM contents. Removing the acetone-extractable fraction from the 23% VM corncob charcoal significantly reduced the enhancement of

  2. 40 CFR 60.2115 - What if I do not use a wet scrubber, fabric filter, activated carbon injection, selective...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ..., fabric filter, activated carbon injection, selective noncatalytic reduction, or an electrostatic... Limitations and Operating Limits § 60.2115 What if I do not use a wet scrubber, fabric filter, activated... carbon injection, selective noncatalytic reduction, fabric filter, or an electrostatic precipitator...

  3. Holocene Charcoal Deposition From Brazilian Forest Fires

    NASA Astrophysics Data System (ADS)

    Turcq, B.; Cordeiro, R. C.; Albuquerque, A. S.; Simoes, F. L.; Sifeddine, A.

    2004-12-01

    Determination of charcoal accumulation rate in lacustrine sediments allows to reconstruct the fire history of the region surrounding the lake. Our studies have been achieved in three Amazonian sites and one site in Atlantic rainforest. Charcoal fragments are identified and counted under a microscope. Typical size of these charcoals is around ten micrometers and they probably have been subject to eolian transport. The highest charcoal accumulation rates were obtained in sediments from Middle Holocene in Carajás region, eastern Amazonia. These rates are on the same order than the present day charcoal accumulation rate in Alta Floresta, a region of Amazonia which is being submited to intense slash and burn. The lowest values were found in Lagoa da Pata in Sao Gabriel da Cachoeira, a very humid area in western Amazon. We observed from the D. Helvécio record, in the Atlantic rainforest, fire occurrences from 8,400 to 6,400 cal years BP. For Carajás lake, surrounded by tropical rain forest, we had identified fires during the period between 8,000 and 5,300 cal years BP. Finally, the lake Caracarana, which is surrounded by grass savanna, showed a record of main fire occurrence phase at 9,750 cal yrs BP and a second phase marked by charcoal peaks at 7,680, 6,990 and 6,460 cal yrs BP. The synchronism of the fire occurrence periods in different Brazilian regions is related to the Middle Holocene dry climate phase provoked by the low summer insolation. Differences in the accumulation rates can be attributed to differences in biomass availability and fire return time. The carbon released in the atmosphere by this fires must have contributed to the observed increase of CO2, poorer in 13C, during the middle Holocene.

  4. Novel Application of Confocal Laser Scanning Microscopy and 3D Volume Rendering toward Improving the Resolution of the Fossil Record of Charcoal

    PubMed Central

    Belcher, Claire M.; Punyasena, Surangi W.; Sivaguru, Mayandi

    2013-01-01

    Variations in the abundance of fossil charcoals between rocks and sediments are assumed to reflect changes in fire activity in Earth’s past. These variations in fire activity are often considered to be in response to environmental, ecological or climatic changes. The role that fire plays in feedbacks to such changes is becoming increasingly important to understand and highlights the need to create robust estimates of variations in fossil charcoal abundance. The majority of charcoal based fire reconstructions quantify the abundance of charcoal particles and do not consider the changes in the morphology of the individual particles that may have occurred due to fragmentation as part of their transport history. We have developed a novel application of confocal laser scanning microscopy coupled to image processing that enables the 3-dimensional reconstruction of individual charcoal particles. This method is able to measure the volume of both microfossil and mesofossil charcoal particles and allows the abundance of charcoal in a sample to be expressed as total volume of charcoal. The method further measures particle surface area and shape allowing both relationships between different size and shape metrics to be analysed and full consideration of variations in particle size and size sorting between different samples to be studied. We believe application of this new imaging approach could allow significant improvement in our ability to estimate variations in past fire activity using fossil charcoals. PMID:23977267

  5. Determination of 63Ni and 59Ni in spent ion-exchange resin and activated charcoal from the IEA-R1 nuclear research reactor.

    PubMed

    Taddei, M H T; Macacini, J F; Vicente, R; Marumo, J T; Sakata, S K; Terremoto, L A A

    2013-07-01

    A radiochemical method has been adapted to determine (59)Ni and (63)Ni in samples of radioactive wastes from the water cleanup system of the IEA-R1 nuclear research reactor. The process includes extraction chromatographic resin with dimethylglyoxime (DMG) as a functional group. Activity concentrations of (59)Ni and (63)Ni were measured, respectively, by X-ray spectrometry and liquid scintillation counting, whereas the chemical yield was determined by ICP-OES. The average ratio of measured activity concentrations of (63)Ni and (59)Ni agree well with theory. PMID:23524230

  6. Recovery of Technetium Adsorbed on Charcoal

    SciTech Connect

    Engelmann, Mark D.; Metz, Lori A.; Ballou, Nathan E.

    2006-05-01

    Two methods capable of near complete recovery of technetium adsorbed on charcoal are presented. The first involves liquid extraction of the technetium from the charcoal by hot 4M nitric acid. An average recovery of 98% (n=3) is obtained after three rounds of extraction. The second method involves dry ashing with air in a quartz combustion tube at 400-450 C. This method yields an average recovery of 96% (n=5). Other thermal methods were attempted, but resulted in reduced recovery and incomplete material balance

  7. Calibration of diffusion barrier charcoal detectors and application to radon sampling in dwellings

    NASA Astrophysics Data System (ADS)

    Cabrera, M. E. M.; Sujo, L. C.; Villalba, L.; Peinado, J. S.; Jimenez, A. C.; Baca, A. M.; Gandara, S. D.; Villalobos, M. R.; Miranda, A. L.; Peraza, E. F. H.

    2003-10-01

    Some calibration conditions of diffusion barrier charcoal canister (DBCC) detectors for measuring radon concentration in air were studied. A series of functional expressions and graphs were developed to describe relationship between radon concentration in air and the activity adsorbed in DBCC, when placed in small chambers. A semi-empirical expression for the DBCC calibration was obtained, based on the detector integration time and the adsorption coefficient of radon on activated charcoal. Both, the integration time for 10% of DBCC of the same batch, and the adsorption coefficient of radon for the activated charcoal used in these detectors, were experimentally determined. Using these values as the calibration parameters, a semi-empirical calibration function was used for the interpretation of the radon activities in the detectors used for sampling more than 200 dwellings in the major cities of the state of Chihuahua, Mexico.

  8. SOURCE ASSESSMENT: CHARCOAL MANUFACTURING, STATE-OF-THE-ART

    EPA Science Inventory

    This document reviews the state of the art of air emissions from charcoal manufacture. The composition, quality, and rate of emissions, and their environmental effects are described. Charcoal is the solid material remaining after the pyrolysis of carbonaceous materials, primarily...

  9. Seasonal changes in the invertebrate community of granular activated carbon filters and control technologies.

    PubMed

    Wang, Qing; You, Wei; Li, Xiaowei; Yang, Yufeng; Liu, Lijun

    2014-03-15

    Invertebrate colonization of granular activated carbon (GAC) filters in the waterworks is one of the most frequently occurring and least studied biological problems of water processing in China. A survey of invertebrate colonization of GAC filters was carried out weekly from October 2010 to December 2011 at a reservoir water treatment works in South China. Twenty-six kinds of invertebrates were observed. The abundance was as high as 5600ind.m(-3) with a mean of 860ind.m(-3). Large variations in abundance were observed among different seasons and before and after GAC filtration. The dominant organisms were rotifers and copepods. The average invertebrate abundance in the filtrate was 12-18.7 times of that in the pre-filtered water. Results showed that the GAC filters were colonized by invertebrates which may lead to a higher output of organisms in the filtrate than in the pre-filtered water. The invertebrate abundance in the GAC filters was statistically correlated with the water temperature. Seasonal patterns were observed. The invertebrate abundance grew faster in the spring and summer. Copepods were dominant in the summer while rotifers dominated in all other seasons of the year. There was a transition of small invertebrates (rotifers) gradually being substituted by larger invertebrates (copepods) from spring to summer. Control measures such as backwashing with chloric water, drying filter beds and soaking with saliferous water were implemented in the waterworks to reduce invertebrate abundances in the GAC filters. The results showed that soaking with saliferous water (99%, reduction in percent) was best but drying the filter beds (84%) was more economical. Soaking filter beds with 20g/L saliferous water for one day can be implemented in case of emergency. In order to keep invertebrate abundance in the acceptable range, some of these measures should be adopted. PMID:24268057

  10. Basis for and practical methods of controlling painting activities at the Sequoyah Nuclear Plant

    SciTech Connect

    Campbell, R.R.

    1997-08-01

    Sequoyah Nuclear Plant (SQN) follows the guidance presented in Regulatory Guide (R.G.) 1.52, {open_quotes}Design, Testing, and Maintenance Criteria for Atmospheric Cleanup System Air Filtration and Adsorption System Units of Light-Water-Cooled Nuclear Power Plants{close_quotes} in protecting its charcoal filter trains from the effects of painting and other chemical releases. SQN, as well as other nuclear facilities around the country, have the problem of how to address the issue of protection of Engineered Safety Feature (ESF) filter systems from degradation due to communication with airborne hydrocarbons (i.e., primarily paints and solvents). R.G. 1.52 (and a similar statement from R.G. 1.140) states in part,{open_quotes}Testing should be performed ... following painting, fire, or chemical release in any ventilation zone communicating with the system...,{close_quotes} and requires that a test be performed upon any kind of painting or chemical release. This is considered overly restrictive if the activity is minor and in a location remote from the charcoal filters. Charcoal filters used in air cleaning systems are required to filter out radioactive iodine from an airstream before its release from the plant to the environment. Charcoal filters will age with time because of their ability to adsorb many different types of material. This aging affects the charcoal by lowering its iodine retention efficiency, and therefore the charcoal needs to be protected from the effects of chemicals such as paint fumes. 14 refs., 3 tabs.

  11. Re-evaluating the relationships among filtering activity, unnecessary storage, and visual working memory capacity.

    PubMed

    Emrich, Stephen M; Busseri, Michael A

    2015-09-01

    The amount of task-irrelevant information encoded in visual working memory (VWM), referred to as unnecessary storage, has been proposed as a potential mechanism underlying individual differences in VWM capacity. In addition, a number of studies have provided evidence for additional activity that initiates the filtering process originating in the frontal cortex and basal ganglia, and is therefore a crucial step in the link between unnecessary storage and VWM capacity. Here, we re-examine data from two prominent studies that identified unnecessary storage activity as a predictor of VWM capacity by directly testing the implied path model linking filtering-related activity, unnecessary storage, and VWM capacity. Across both studies, we found that unnecessary storage was not a significant predictor of individual differences in VWM capacity once activity associated with filtering was accounted for; instead, activity associated with filtering better explained variation in VWM capacity. These findings suggest that unnecessary storage is not a limiting factor in VWM performance, whereas neural activity associated with filtering may play a more central role in determining VWM performance that goes beyond preventing unnecessary storage. PMID:25690338

  12. Emissions of air pollutants from indoor charcoal barbecue.

    PubMed

    Huang, Hsiao-Lin; Lee, Whei-May Grace; Wu, Feng-Shu

    2016-01-25

    Ten types of commercial charcoal commonly used in Taiwan were investigated to study the potential health effects of air pollutants generated during charcoal combustion in barbecue restaurants. The charcoal samples were combusted in a tubular high-temperature furnace to simulate the high-temperature charcoal combustion in barbecue restaurants. The results indicated that traditional charcoal has higher heating value than green synthetic charcoal. The amount of PM10 and PM2.5 emitted during the smoldering stage increased when the burning temperature was raised. The EF for CO and CO2 fell within the range of 68-300 and 644-1225 g/kg, respectively. Among the charcoals, the lowest EF for PM2.5 and PM10 were found in Binchōtan (B1). Sawdust briquette charcoal (I1S) emitted the smallest amount of carbonyl compounds. Charcoal briquettes (C2S) emitted the largest amount of air pollutants during burning, with the EF for HC, PM2.5, PM10, formaldehyde, and acetaldehyde being the highest among the charcoals studied. The emission of PM2.5, PM10, formaldehyde, and acetaldehyde were 5-10 times those of the second highest charcoal. The results suggest that the adverse effects of the large amounts of air pollutants generated during indoor charcoal combustion on health and indoor air quality must not be ignored. PMID:26476306

  13. Charcoal from the pyrolysis of rapeseed plant straw-stalk

    SciTech Connect

    Karaosmanoglu, F.; Tetik, E.

    1999-07-01

    Charcoal is an important product of pyrolysis of biomass sources. Charcoal can be used for domestic, agricultural, metallurgical, and chemical purposes. In this study different characteristics of charcoal, one of the rape seed plant straw-stalk pyrolysis product, was researched and presented as candidates.

  14. Sawdust and Charcoal: Fuel for Raku.

    ERIC Educational Resources Information Center

    Brisson, Harriet E.

    1980-01-01

    Raku is an ancient Japanese process of firing pottery in which the bisqued piece is glazed and placed in a preheated kiln. Described are the benefits of substituting sawdust and charcoal for firing pottery by those people who do not have access to a kiln. (KC)

  15. The environmental impact on air quality and exposure to carbon monoxide from charcoal production in southern Brazil.

    PubMed

    Gomes, Gabriel Meneghetti Faé; Encarnação, Fábio

    2012-07-01

    Black wattle silviculture is an important activity in southern Brazil. Much of the wood is used in the production of charcoal and the pyrolysis products impacts on air quality. This paper estimates the level of atmospheric contamination from the production of charcoal in one region of Brazil. We describe a low-cost charcoal kiln that can capture condensable gases and we estimate the levels of exposure of kiln workers to carbon monoxide. The latter results indicated that exposure to carbon monoxide can be reduced from an average of 950 ppm to 907 ppm and the mass of gases reduced by 16.8%. PMID:22541721

  16. Dual-tunable multiferroic active ring filter for microwave photonic oscillators

    NASA Astrophysics Data System (ADS)

    Vitko, V. V.; Nikitin, A. A.; Ustinov, A. B.; Kalinikos, B. A.

    2015-12-01

    A theoretical model of a microwave active ring filter based on a ferrite-ferroelectric layered structure serving as a waveguide for spin-electromagnetic waves is developed. An experimental prototype of the device is fabricated and characterized. The device is implemented as an active-ring resonator with a microwave amplifier and a ferrite-ferroelectric delay line. The resonance properties of this system are studied theoretically and experimentally. The results show dual control of central frequency of the filter with magnetic and electric fields. An effective Q-factor of 50 000 and tuning by 5 MHz with an electric field are achieved at 8 GHz.

  17. Bacterial diversity and active biomass in full-scale granular activated carbon filters operated at low water temperatures.

    PubMed

    Kaarela, Outi E; Härkki, Heli A; Palmroth, Marja R T; Tuhkanen, Tuula A

    2015-01-01

    Granular activated carbon (GAC) filtration enhances the removal of natural organic matter and micropollutants in drinking water treatment. Microbial communities in GAC filters contribute to the removal of the biodegradable part of organic matter, and thus help to control microbial regrowth in the distribution system. Our objectives were to investigate bacterial community dynamics, identify the major bacterial groups, and determine the concentration of active bacterial biomass in full-scale GAC filters treating cold (3.7-9.5°C), physicochemically pretreated, and ozonated lake water. Three sampling rounds were conducted to study six GAC filters of different operation times and flow modes in winter, spring, and summer. Total organic carbon results indicated that both the first-step and second-step filters contributed to the removal of organic matter. Length heterogeneity analysis of amplified 16S rRNA genes illustrated that bacterial communities were diverse and considerably stable over time. α-Proteobacteria, β-Proteobacteria, and Nitrospira dominated in all of the GAC filters, although the relative proportion of dominant phylogenetic groups in individual filters differed. The active bacterial biomass accumulation, measured as adenosine triphosphate, was limited due to low temperature, low flux of nutrients, and frequent backwashing. The concentration of active bacterial biomass was not affected by the moderate seasonal temperature variation. In summary, the results provided an insight into the biological component of GAC filtration in cold water temperatures and the operational parameters affecting it. PMID:25242545

  18. BBQ charcoal combustion as an important source of trace metal exposure to humans.

    PubMed

    Susaya, Janice; Kim, Ki-Hyun; Ahn, Ji-Won; Jung, Myung-Chae; Kang, Chang-Hee

    2010-04-15

    To provide information about charcoal combustion as an important source of atmospheric trace metal pollution, 11 charcoal products were combusted and PM(10) filter samples were collected. The PM-bound metal elements were extracted by microwave acid digestion and analyzed by ICP-AES. The concentrations of trace metal elements ranged from a few to 10(5)ng m(-3) in the following order of magnitude: Zn>Pb>Mg>Ba>Cu>V>Cr>Co>Cd>Ni>Mn>Se>As. Emissions of most elements from charcoal combustion were high compared to other sources. In case of Cd, Co, and Ni, their concentrations exceeded the inhalation minimum risk levels (MRLs) of the United States Agency for Toxic Substances and Disease Registry (US-ATSDR) for chronic duration exposure by a factor of 30, 3.9, and 2.2, respectively. Likewise, Cd levels exceeded the US-ATSDR MRLs for acute-duration exposure by a factor of 10, while those of Pb and Cd exceeded air quality guideline (AQG) of the World Health Organization (WHO) by a factor of 29 and 59, respectively. Mn levels also exceeded the United States Environmental Protection Agency (US EPA) Reference Air Concentrations (RfCs) by a factor of 2.7. This study shows that barbecue charcoal combustion can be an important source of trace metal emissions to the atmosphere with potential health risks. PMID:20031319

  19. IIR filtering based adaptive active vibration control methodology with online secondary path modeling using PZT actuators

    NASA Astrophysics Data System (ADS)

    Boz, Utku; Basdogan, Ipek

    2015-12-01

    Structural vibrations is a major cause for noise problems, discomfort and mechanical failures in aerospace, automotive and marine systems, which are mainly composed of plate-like structures. In order to reduce structural vibrations on these structures, active vibration control (AVC) is an effective approach. Adaptive filtering methodologies are preferred in AVC due to their ability to adjust themselves for varying dynamics of the structure during the operation. The filtered-X LMS (FXLMS) algorithm is a simple adaptive filtering algorithm widely implemented in active control applications. Proper implementation of FXLMS requires availability of a reference signal to mimic the disturbance and model of the dynamics between the control actuator and the error sensor, namely the secondary path. However, the controller output could interfere with the reference signal and the secondary path dynamics may change during the operation. This interference problem can be resolved by using an infinite impulse response (IIR) filter which considers feedback of the one or more previous control signals to the controller output and the changing secondary path dynamics can be updated using an online modeling technique. In this paper, IIR filtering based filtered-U LMS (FULMS) controller is combined with online secondary path modeling algorithm to suppress the vibrations of a plate-like structure. The results are validated through numerical and experimental studies. The results show that the FULMS with online secondary path modeling approach has more vibration rejection capabilities with higher convergence rate than the FXLMS counterpart.

  20. Three-element trap filter radiometer based on large active area silicon photodiodes.

    PubMed

    Salim, S G R; Anhalt, K; Taubert, D R; Hollandt, J

    2016-05-20

    This paper shows the opto-mechanical design of a new filter radiometer built at the Physikalisch-Technische Bundesanstalt, Germany, for the accurate determination of the thermodynamic temperature of high-temperature blackbodies. The filter radiometer is based on a three-element reflection-type trap detector that uses three large active area silicon photodiodes. Its spectral coverage and field of view are defined by a detachable narrow-band filter and a diamond-turned precision aperture, respectively. The temperature of the filter radiometer is stabilized using a water-streamed housing and is measured using a thin-film platinum thermometer placed onto the first photodiode element. The trap "mount" has been made as compact as possible, which, together with the large active area of the chosen photodiodes, allows a wide field of view. This work presents the design of the filter radiometer and discusses the criteria that have been considered in order for the filter radiometer to suit the application. PMID:27411121

  1. JPL activities on development of acousto-optic tunable filter imaging spectrometer

    NASA Technical Reports Server (NTRS)

    Cheng, Li-Jen; Chao, Tien-Hsin; Reyes, George

    1992-01-01

    Recent activities of JPL in the development of a new type of imaging spectrometers for earth observation and planetary exploration are reported. This instrument uses the acousto-optic tunable filter (AOTF) as high resolution and fast programmable bandpass filter. AOTF operates in the principle of acousto-optic interaction in an anisotropic medium. This filter can be tuned in sequential, random, and multiwavelength access modes, providing observational flexibility. The diffraction process in the filter generates two diffracted monochromatic beams with polarization orthogonal to each other, creating a unique capability to measure both polarimetric and spectral properties of the incoming light simultaneously with a single instrument. The device gives wide wavelength operations with reasonably large throughput. In addition, it is in a compact solid-state structure without moving parts, providing system reliability. These attractive features give promising opportunities to develop a new generation of airborne/spaceborne and ground, real-time, imaging spectrometer systems for remote sensing applications.

  2. Chemical techniques for pretreating and regenerating active slag filters for improved phosphorus removal.

    PubMed

    Pratt, C; Shilton, A; Haverkamp, R G; Pratt, S

    2011-07-01

    Active slag filters are an emerging technology for removing phosphorus (P) from wastewaters. Recent research revealed that adsorption onto Fe oxides/oxyhydroxides at near-neutral pH and oxidizing Eh is the key mechanism of P removal by melter slag filters. Currently, filter lifespan is limited by available adsorption sites. This study examined whether the performance and longevity of active filters could be improved via chemical treatment to create additional reactive sites as well as regenerate exhausted ones. Fresh original melter slag as well as slag from an exhausted full-scale filter was tested. Chemical reagents that could manipulate the pH/Eh of the slag granule surfaces and potentially activate them for further P removal were used, namely hydrochloric acid (HCI), sodium hydroxide (NaOH) and sodium dithionite (Na2S2O4). Waste stabilization pond effluent was then applied to the treated slag to assess the effectiveness of the treatments at improving P removal. Fresh slag treated with Na2S204 and HCl, respectively, retained 1.9 and 1.4 times more P from the effluent than the untreated fresh slag. These reagents were even more effective at regenerating the exhausted slag, increasing total retained P by a factor of 13 and six, respectively, compared with untreated slag. Sodium hydroxide was ineffective at increasing P removal. The higher P retention by the 'treated exhausted slag' compared with the 'treated fresh media' indicates that adsorption sites on melter slag filters become increasingly reactive with time. This research is the first study to provide evidence that P retention by active slag filters can be increased by both (1) chemical pre treatment and (2) chemical post-treatment once their P removal is exhausted, thereby potentially transforming them from a single use system to a more viable, reusable treatment technology. PMID:21882558

  3. Comparing modeled fire dynamics with charcoal records for the Holocene

    NASA Astrophysics Data System (ADS)

    Bruecher, T.; Brovkin, V.; Kloster, S.; Marlon, J. R.; Power, M. J.

    2013-12-01

    An Earth System model of intermediate complexity, CLIMBER-2, and land surface model JSBACH that includes dynamic vegetation, carbon cycle, and fire regime are used for simulation of natural fire dynamics through the last 8,000 years. To compare the fire model results with the charcoal reconstructions, several output variables of the fire model (burned area, carbon emissions) and several approaches of model output processing are tested. The z-scores out of charcoal dataset have been calculated for the period 8,000 to 200 BP to exclude a period of strong anthropogenic forcing during the last two centuries. The model analysis points mainly to an increasing fire activity during the Holocene for most of the investigated areas, which is in good correspondence to reconstructed fire trends out of charcoal data for most of the tested regions, while for few regions such as Europe the simulated trend and the reconstructed trends are different. The difference between the modeled and reconstructed fire activity could be due to absence of the anthropogenic forcing in the model simulations, but also due to limitations of model assumptions for modeling fire dynamics. For the model trends, the usage of averaging or z-score processing of model output resulted in similar directions of trend. Therefore, the approach of fire model output processing does not effect results of the model-data comparison. Global fire modeling is still in its infancy; improving our representations of fire through validation exercises such as what we present here is thus essential before testing hypotheses about the effects of extreme climate changes on fire behavior and potential feedbacks that result from those changes.

  4. Calcium ions open a selectivity filter gate during activation of the MthK potassium channel

    NASA Astrophysics Data System (ADS)

    Posson, David J.; Rusinova, Radda; Andersen, Olaf S.; Nimigean, Crina M.

    2015-09-01

    Ion channel opening and closing are fundamental to cellular signalling and homeostasis. Gates that control K+ channel activity were found both at an intracellular pore constriction and within the selectivity filter near the extracellular side but the specific location of the gate that opens Ca2+-activated K+ channels has remained elusive. Using the Methanobacterium thermoautotrophicum homologue (MthK) and a stopped-flow fluorometric assay for fast channel activation, we show that intracellular quaternary ammonium blockers bind to closed MthK channels. Since the blockers are known to bind inside a central channel cavity, past the intracellular entryway, the gate must be within the selectivity filter. Furthermore, the blockers access the closed channel slower than the open channel, suggesting that the intracellular entryway narrows upon pore closure, without preventing access of either the blockers or the smaller K+. Thus, Ca2+-dependent gating in MthK occurs at the selectivity filter with coupled movement of the intracellular helices.

  5. A Transformerless Hybrid Active Filter Capable of Complying with Harmonic Guidelines for Medium-Voltage Motor Drives

    NASA Astrophysics Data System (ADS)

    Kondo, Ryota; Akagi, Hirofumi

    This paper presents a transformerless hybrid active filter that is integrated into medium-voltage adjustable-speed motor drives for fans, pumps, and compressors without regenerative braking. The authors have designed and constructed a three-phase experimental system rated at 400V and 15kW, which is a downscaled model from a feasible 6.6-kV 1-MW motor drive system. This system consists of the hybrid filter connecting a passive filter tuned to the 7th harmonic filter in series with an active filter that is based on a three-level diode-clamped PWM converter, as well as an adjustable-speed motor drive in which a diode rectifier is used as the front end. The hybrid filter is installed on the ac side of the diode rectifier with no line-frequency transformer. The downscaled system has been exclusively tested so as to confirm the overall compensating performance of the hybrid filter and the filtering performance of a switching-ripple filter for mitigating switching-ripple voltages produced by the active filter. Experimental results verify that the hybrid filter achieves harmonic compensation of the source current in all the operating regions from no-load to the rated-load conditions, and that the switching-ripple filter reduces the switching-ripple voltages as expected.

  6. Impacts of backwashing on granular activated carbon filters for advanced wastewater treatment.

    PubMed

    Frank, Joshua; Ruhl, Aki Sebastian; Jekel, Martin

    2015-12-15

    The use of granular activated carbon (GAC) in fixed bed filters is a promising option for the removal of organic micropollutants (OMP) from wastewater treatment plant effluents. Frequent backwashing of the filter bed is inevitable, but its effect on potential filter stratification is not well understood yet and thus has been evaluated in the present study for two commercial GAC products. Backwashing of GAC filters was simulated with 10 or 100 filter bed expansions of 20 or 100% at backwash velocities of 12 and 40 m/h, respectively. Five vertical fractions were extracted and revealed a vertical stratification according to grain sizes and material densities. Sieve analyses indicated increasing grain sizes towards the bottom for one GAC while grain sizes of the other GAC were more homogeneously distributed throughout the filter bed. The apparent densities of the top sections were significantly lower than that of the bottom sections of both products. Comparative long term fixed bed adsorption experiments with the top and bottom sections of the stratified GAC showed remarkable differences in breakthrough curves of dissolved organic carbon, UV light absorption at 254 nm wavelength (UVA254) and OMP. GAC from the upper section showed constantly better removal efficiencies than GAC from the bottom section, especially for weakly adsorbing OMP such as sulfamethoxazole. Furthermore correlations between UVA254 reductions and OMP removals were found. PMID:26405842

  7. Selective adsorption of lead, copper and antimony in runoff water from a small arms shooting range with a combination of charcoal and iron hydroxide.

    PubMed

    Mariussen, Espen; Johnsen, Ida Vaa; Strømseng, Arnljot Einride

    2015-03-01

    Metals and metalloids from ammunition residues at small arms shooting ranges leach into the soil and surrounding watercourses and may pose a threat to exposed wildlife and humans. To reduce the potential impact of heavy metal on the environment a field study was performed with different sorbents in order to reduce the metal concentration in polluted water from a shooting range. Two sorbents were tested in situ for their ability to reduce the concentration of Cu, Sb and Pb: Brimac(®) charcoal and Kemira(®) iron hydroxide. The mean sorption of Cu, Sb and Pb was 85%, 65%, and 88% respectively when using the charcoal and 60%, 85% and 92% respectively with the iron hydroxide. Even better sorption of the elements was achieved when the two sorbents were combined in order to increase their selectivity. The best results were achieved in the filter in which the water percolated the charcoal first and the iron hydroxide last, with a mean sorption of Cu, Sb and Pb of 89%, 90% and 93% respectively. This preparation gave a significant better sorption of Cu compared to the filter in which the water percolated the iron hydroxide first and the charcoal last. The different effect between the two filters may be due to pH, since charcoal has alkaline properties and iron hydroxide has acidic properties. For large scale experiments or in filter devices we therefore recommend use of a combination of different reactive sorbents. PMID:25527987

  8. Steady-state response of a charcoal bed to radon in flowing air with water vapor

    SciTech Connect

    Blue, T.E.; Jarzemba, M.S.; Fentiman, A.W.

    1995-06-01

    Previously we have developed a mathematical model of radon adsorption in active air with water vapor on small U.S. Environmental Protection Agency charcoal canisters that are used for environmental measurements of radon. The purpose of this paper is to extend this mathematical model to describe the adsorption of radon by large charcoal beds with radon-laden air flowing through them. The resulting model equations are solved analytically to predict the steady-state adsorption of radon by such beds. 14 refs., 3 figs.

  9. High-speed ultrashort pulse fiber ring laser using charcoal nanoparticles.

    PubMed

    Li, Wenbo; Hu, Hongyu; Zhang, Xiang; Zhao, Shuai; Fu, Kan; Dutta, Niloy K

    2016-03-20

    A mode-locked erbium-doped fiber ring laser that is easy to set up is proposed and experimentally demonstrated to generate a high-repetition-rate optical pulse train with an ultrashort pulse width. The laser combines a rational harmonic mode-locking technique and charcoal nanoparticles as saturable absorbers. Compared to a solely active mode-locking scheme, the scheme with charcoal nanoparticles can remove the supermodes and narrow the pulse width by a factor of 0.57 at a repetition rate of 20 GHz. Numerical simulation of the laser performance is also provided, which shows good agreement with the experimental results. PMID:27140546

  10. Activated Biological Filters (ABF Towers). Student Manual. Biological Treatment Process Control.

    ERIC Educational Resources Information Center

    Wooley, John F.

    This student manual contains textual material for a two-lesson unit on activated bio-filters (ABF). The first lesson (the sewage treatment plant) examines those process units that are unique to the ABF system. The lesson includes a review of the structural components of the ABF system and their functions and a discussion of several operational…

  11. Activated Biological Filters (ABF Towers). Instructor's Guide. Biological Treatment Process Control.

    ERIC Educational Resources Information Center

    Wooley, John F.

    This instructor's manual contains materials needed to teach a two-lesson unit on activated bio-filters (ABF). These materials include: (1) an overview of the two lessons; (2) lesson plans; (3) lecture outlines (keyed to a set of slides designed for use with the lessons); (4) overhead transparency masters; (5) worksheets for each lesson (with…

  12. Internal porosity of mineral coating supports microbial activity in rapid sand filters for groundwater treatment.

    PubMed

    Gülay, Arda; Tatari, Karolina; Musovic, Sanin; Mateiu, Ramona V; Albrechtsen, Hans-Jørgen; Smets, Barth F

    2014-11-01

    A mineral coating develops on the filter grain surface when groundwater is treated via rapid sand filtration in drinking water production. The coating changes the physical and chemical properties of the filter material, but little is known about its effect on the activity, colonization, diversity, and abundance of microbiota. This study reveals that a mineral coating can positively affect the colonization and activity of microbial communities in rapid sand filters. To understand this effect, we investigated the abundance, spatial distribution, colonization, and diversity of all and of nitrifying prokaryotes in filter material with various degrees of mineral coating. We also examined the physical and chemical characteristics of the mineral coating. The amount of mineral coating correlated positively with the internal porosity, the packed bulk density, and the biologically available surface area of the filter material. The volumetric NH4 (+) removal rate also increased with the degree of mineral coating. Consistently, bacterial 16S rRNA and amoA abundances positively correlated with increased mineral coating levels. Microbial colonization could be visualized mainly within the outer periphery (60.6 ± 35.6 μm) of the mineral coating, which had a thickness of up to 600 ± 51 μm. Environmental scanning electron microscopic (E-SEM) observations suggested an extracellular polymeric substance-rich matrix and submicron-sized bacterial cells. Nitrifier diversity profiles were similar irrespective of the degree of mineral coating, as indicated by pyrosequencing analysis. Overall, our results demonstrate that mineral coating positively affects microbial colonization and activity in rapid sand filters, most likely due to increased volumetric cell abundances facilitated by the large surface area of internal mineral porosity accessible for microbial colonization. PMID:25192987

  13. Internal Porosity of Mineral Coating Supports Microbial Activity in Rapid Sand Filters for Groundwater Treatment

    PubMed Central

    Gülay, Arda; Tatari, Karolina; Musovic, Sanin; Mateiu, Ramona V.; Albrechtsen, Hans-Jørgen

    2014-01-01

    A mineral coating develops on the filter grain surface when groundwater is treated via rapid sand filtration in drinking water production. The coating changes the physical and chemical properties of the filter material, but little is known about its effect on the activity, colonization, diversity, and abundance of microbiota. This study reveals that a mineral coating can positively affect the colonization and activity of microbial communities in rapid sand filters. To understand this effect, we investigated the abundance, spatial distribution, colonization, and diversity of all and of nitrifying prokaryotes in filter material with various degrees of mineral coating. We also examined the physical and chemical characteristics of the mineral coating. The amount of mineral coating correlated positively with the internal porosity, the packed bulk density, and the biologically available surface area of the filter material. The volumetric NH4+ removal rate also increased with the degree of mineral coating. Consistently, bacterial 16S rRNA and amoA abundances positively correlated with increased mineral coating levels. Microbial colonization could be visualized mainly within the outer periphery (60.6 ± 35.6 μm) of the mineral coating, which had a thickness of up to 600 ± 51 μm. Environmental scanning electron microscopic (E-SEM) observations suggested an extracellular polymeric substance-rich matrix and submicron-sized bacterial cells. Nitrifier diversity profiles were similar irrespective of the degree of mineral coating, as indicated by pyrosequencing analysis. Overall, our results demonstrate that mineral coating positively affects microbial colonization and activity in rapid sand filters, most likely due to increased volumetric cell abundances facilitated by the large surface area of internal mineral porosity accessible for microbial colonization. PMID:25192987

  14. Soil Charcoal to Assess the Impacts of Past Human Disturbances on Tropical Forests

    PubMed Central

    Vleminckx, Jason; Morin-Rivat, Julie; Biwolé, Achille B.; Daïnou, Kasso; Gillet, Jean-François; Doucet, Jean-Louis; Drouet, Thomas; Hardy, Olivier J.

    2014-01-01

    The canopy of many central African forests is dominated by light-demanding tree species that do not regenerate well under themselves. The prevalence of these species might result from ancient slash-and-burn agricultural activities that created large openings, while a decline of these activities since the colonial period could explain their deficit of regeneration. To verify this hypothesis, we compared soil charcoal abundance, used as a proxy for past slash-and-burn agriculture, and tree species composition assessed on 208 rainforest 0.2 ha plots located in three areas from Southern Cameroon. Species were classified in regeneration guilds (pioneer, non-pioneer light-demanding, shade-bearer) and characterized by their wood-specific gravity, assumed to reflect light requirement. We tested the correlation between soil charcoal abundance and: (i) the relative abundance of each guild, (ii) each species and family abundance and (iii) mean wood-specific gravity. Charcoal was found in 83% of the plots, indicating frequent past forest fires. Radiocarbon dating revealed two periods of fires: “recent” charcoal were on average 300 years old (up to 860 BP, n = 16) and occurred in the uppermost 20 cm soil layer, while “ancient” charcoal were on average 1900 years old (range: 1500 to 2800 BP, n = 43, excluding one sample dated 9400 BP), and found in all soil layers. While we expected a positive correlation between the relative abundance of light-demanding species and charcoal abundance in the upper soil layer, overall there was no evidence that the current heterogeneity in tree species composition can be explained by charcoal abundance in any soil layer. The absence of signal supporting our hypothesis might result from (i) a relatively uniform impact of past slash-and-burn activities, (ii) pedoturbation processes bringing ancient charcoal to the upper soil layer, blurring the signal of centuries-old Human disturbances, or (iii) the prevalence of other

  15. A single PWM section solar array shunt switching unit with an active ripple filter

    SciTech Connect

    Cho, B.H.; Lee, D.H.

    1995-12-31

    A single pulse-width-modulation (PWM) section shunt switching unit (SSU) for multi-kilowatt space power systems is presented. Due to the output capacitance of the solar cell, the PWM section in the array draws a pulsating current, which must be suppressed with a large filter inductor for each section. Proposed design uses a single designated PWM section with an active inductance enhancement filter. This leads to drastic reduction in size and weight of the SSU compared to the existing designs for the Space Station and Earth Observation System (EOS). A prototype has been designed and tested.

  16. Emissions of air toxics from the production of charcoal in a simulated Missouri charcoal kiln

    SciTech Connect

    Lemieux, P.M.; Kariher, P.H.; Fairless, B.J.; Tapp, J.A.

    1998-11-01

    The paper gives results of experiments in a laboratory-scale charcoal kiln simulator to evaluate emissions of hazardous air pollutant from the production of charcoal in Missouri-type kilns. Fixed combustion gases were measured using continuous monitors. In addition, other pollutants, including methanol, volatile organic compounds, semivolatile organic compounds, and particle emission rates and size distributions were measured using various techniques. Emissions of all pollutants are reported in grams emitted per unit mass of initial wood converted to charcoal. Two burn conditions--slow and fast burn--were examined. High levels of methanol, benzene, and fine particulate were emitted from all tests. The estimated emissions from the fast burn conditions were significantly higher than those from the slow burn conditions.

  17. Inductive Displacement Sensors with a Notch Filter for an Active Magnetic Bearing System

    PubMed Central

    Chen, Seng-Chi; Le, Dinh-Kha; Nguyen, Van-Sum

    2014-01-01

    Active magnetic bearing (AMB) systems support rotating shafts without any physical contact, using electromagnetic forces. Each radial AMB uses two pairs of electromagnets at opposite sides of the rotor. This allows the rotor to float in the air gap, and the machine to operate without frictional losses. In active magnetic suspension, displacement sensors are necessary to detect the radial and axial movement of the suspended object. In a high-speed rotating machine equipped with an AMB, the rotor bending modes may be limited to the operating range. The natural frequencies of the rotor can cause instability. Thus, notch filters are a useful circuit for stabilizing the system. In addition, commercial displacement sensors are sometimes not suitable for AMB design, and cannot filter the noise caused by the natural frequencies of rotor. Hence, implementing displacement sensors based on the AMB structure is necessary to eliminate noises caused by natural frequency disturbances. The displacement sensor must be highly sensitive in the desired working range, and also exhibit a low interference noise, high stability, and low cost. In this study, we used the differential inductive sensor head and lock-in amplifier for synchronous demodulation. In addition, an active low-pass filter and a notch filter were used to eliminate disturbances, which caused by natural frequencies. As a consequence, the inductive displacement sensor achieved satisfactory linearity, high sensitivity, and disturbance elimination. This sensor can be easily produced for AMB applications. A prototype of these displacement sensors was built and tested. PMID:25029281

  18. New hybrid active power filter for harmonic current suppression and reactive power compensation

    NASA Astrophysics Data System (ADS)

    Biricik, Samet; Cemal Ozerdem, Ozgur; Redif, Soydan; Sezai Dincer, Mustafa

    2016-08-01

    In the case of undistorted and balanced grid voltages, low ratio shunt active power filters (APFs) can give unity power factors and achieve current harmonic cancellation. However, this is not possible when source voltages are distorted and unbalanced. In this study, the cost-effective hybrid active power filter (HAPF) topology for satisfying the requirements of harmonic current suppression and non-active power compensation for industry is presented. An effective strategy is developed to observe the effect of the placement of power capacitors and LC filters with the shunt APF. A new method for alleviating the negative effects of a nonideal grid voltage is proposed that uses a self-tuning filter algorithm with instantaneous reactive power theory. The real-time control of the studied system was achieved with a field-programmable gate array (FPGA) architecture, which was developed using the OPAL-RT system. The performance result of the proposed HAPF system is tested and presented under nonideal supply voltage conditions.

  19. The addition of charcoals to broiler diets did not alter the recovery of Salmonella Typhimurium during grow-out.

    PubMed

    Wilson, K M; Bourassa, D V; Davis, A J; Freeman, M E; Buhr, R J

    2016-03-01

    Two experiments evaluated prebiotics added to feed on the recovery of Salmonella in broilers during grow-out and processing. In Experiment 1, "seeder" chicks were inoculated with Salmonella Typhimurium and placed with penmates. Treatments were: basal control diet, added 0.3% bamboo charcoal, 0.6% bamboo charcoal, or 0.12% Aromabiotic (medium chain fatty acids). The ceca from seeders and penmates were sampled to confirm Salmonella colonization at 3, 4, and 6 wk, and pen litter was sampled weekly. At 3 wk, charcoal fed chicks had significantly lower cecal recovery (37% lower) of Salmonella via direct plating but no differences at wk 4 or 6. At 6 wk, broilers fed Aromabiotic had no recovery of Salmonella from ceca with direct plating and significantly, 18%, lower recovery with enrichment. In Experiment 2, the treatments were: basal control diet, added 0.3% bamboo charcoal, 0.3% activated bamboo charcoal, or 0.3% pine charcoal. At placement, 2 seeders were challenged with Salmonella and commingled with penmates and ceca sampled at 1 and 2 wk, and ceca from 5 penmates/pen at 3 to 6 wk. Weekly, the pH of the crop and duodenum was measured from 1 penmate/pen and the litter surface sampled. At the end of grow-out broilers were processed. Results showed that penmates had colonized at 1 and 2 wk. Cecal Salmonella showed no differences except at 4 wk, when activated bamboo charcoal had a 18% lower recovery of Salmonella (enrichment) compared to the control (88%). Similar to Experiment 1, the recovery of Salmonella from the litter was not significantly different among treatments, however an overall decrease in recovery by 4 wk with direct plating reoccurred. The pH of the duodenum and the crop were not different among treatments. Crop pH (6.0) for all treatments were significantly higher at wk 1 compared to wk 2 to 6. Charcoals had minimal effect on Salmonella recovery in the ceca, but following defeathering, broilers fed charcoals had significantly lower Salmonella

  20. Charcoal deposition and redeposition in Elk Lake, Minnesota, USA

    USGS Publications Warehouse

    Platt, Bradbury J.

    1996-01-01

    Sedimentary charcoal, diatom and phytolith records of the past 1500 years at Elk Lake, Minnesota, in combination with sediment trap studies and a transect of surface sediment samples, document the mechanisms by which previously deposited charcoal is redeposited and finally buried in this lake. The frequent correspondence of high diatom concentrations and peaks of phytolith and charcoal fragments suggest that currents and turbulence related to lake circulation are responsible for winnowing charcoal and phytoliths from shallow water depositional sites to deeper areas of the lake. High diatom concentrations in the record relate to increased nutrient fluxes also supplied by circulation. Despite the fact that the watershed and area around Elk Lake has not been burned since AD 1922, charcoal continues to reach the profundal zone from littoral source areas in Elk Lake. The variable redeposition of within-lake charcoal requires evaluation before fire-history records can be related to global, regional or even local fire events.

  1. Impact of ancient charcoal kilns on chemical properties of several forest soils after 2 centuries

    NASA Astrophysics Data System (ADS)

    Dufey, Joseph; Hardy, Brieuc; Cornelis, Jean-Thomas

    2014-05-01

    Pyrogenic carbon plays a major role in soil biogeochemical processes and carbon budgets. Until the early 19th century, charcoal was the unique combustible used for iron metallurgy in Wallonia (Belgium). Traditional charcoal kilns were built directly in the forest: wood logs were piled into a mound and isolated from air oxygen with a covering of vegetation residues and soil before setting fire, inducing wood pyrolysis. Nowadays, ancient wood-charring platforms are still easy to identify on the forest floor as heightened domes of 10 meters in diameter characterized by a very dark topsoil horizon containing charcoal dust and fragments. Our goal is to assess the effects of wood charring at mound kiln sites on the properties of various forest soil types in Wallonia (Belgium), after two centuries. We sampled soil by horizon in 18 ancient kiln sites to 1.20 meter depth. The adjacent charcoal-unaffected soils were sampled the same way. We also collected recent charcoal fragments and topsoil samples from a still active charcoal kiln located close to Dole (France) to apprehend the evolution of soil properties over time. The pH, total carbon (C) and nitrogen (N) content, available phosphorus (Pav), cation exchange capacity at pH 7 (CEC), exchangeable cations (Ca++, Mg++, K+, Na+) and loss on ignition at 550°C (LI550) were measured on each soil sample. We separated the soil profiles in 5 groups based on the nature of soil substrate and pedogenesis for interpretation of the results. We show that the total carbon stock is significantly increased at kiln sites due to higher C concentrations and greater depth of the organo-mineral horizon. The C/N ratio in charcoal-enriched soil horizons is significantly higher than in the neighboring reference soils but clearly attenuated compared to pure wood-charcoal fragments. The CEC is higher in the charcoal-enriched soil horizons, not only due to higher C concentrations but also to increased CEC by carbon unit at kiln sites. The high

  2. On the uniqueness of linear moving-average filters for the solar wind-auroral geomagnetic activity coupling

    NASA Technical Reports Server (NTRS)

    Vassiliadis, D.; Klimas, A. J.

    1995-01-01

    The relation between the solar wind input to the magetosphere, VB(sub South), and the auroral geomagnetic index AL is modeled with two linear moving-average filtering methods: linear prediction filters and a driven harmonic oscillator in the form of an electric circuit. Although the response of the three-parameter oscillator is simpler than the filter's, the methods yield similar linear timescales and values of the prediction-observation correlation and the prediction Chi(exp 2). Further the filter responses obtained by the two methods are similar in their long-term features. In these aspects the circuit model is equivalent to linear prediction filtering. This poses the question of uniqueness and proper interpretation of detailed features of the filters such as response peaks. Finally, the variation of timescales and filter responses with the AL activity level is discussed.

  3. Simulation of mercury capture by activated carbon injection in incinerator flue gas. 2. Fabric filter removal.

    PubMed

    Scala, F

    2001-11-01

    Following a companion paper focused on the in-duct mercury capture in incinerator flue gas by powdered activated carbon injection, this paper is concerned with the additional mercury capture on the fabric filter cake, relevant to baghouse equipped facilities. A detailed model is presented for this process, based on material balances on mercury in both gaseous and adsorbed phases along the growing filter cake and inside the activated carbon particles,taking into account mass transfer resistances and adsorption kinetics. Several sorbents of practical interest have been considered, whose parameters have been evaluated from available literature data. The values and range of the operating variables have been chosen in order to simulate typical incinerators operating conditions. Results of simulations indicate that, contrary to the in-duct removal process, high mercury removal efficiencies can be obtained with moderate sorbent consumption, as a consequence of the effective gas/sorbent contacting on the filter. Satisfactory utilization of the sorbents is predicted, especially at long filtration times. The sorbent feed rate can be minimized by using a reactive sorbent and by lowering the filter temperature as much as possible. Minor benefits can be obtained also by decreasing the sorbent particle size and by increasing the cleaning cycle time of the baghouse compartments. Reverse-flow baghouses were more efficient than pulse-jet baghouses, while smoother operation can be obtained by increasing the number of baghouse compartments. Model results are compared with available relevant full scale data. PMID:11718360

  4. Comparison of Mercury Measurement Methods Using Two Active Filter Measurement Methods and a Tekran Speciation Unit

    NASA Astrophysics Data System (ADS)

    Pierce, A.; Gustin, M. S.; Huang, J.; Heidecorn, K.

    2014-12-01

    Three active mercury (Hg) measurement methods were operated side by side at an urban site (University of Nevada, Reno College of Agriculture Greenhouse facility, elev. 1370 m) in Reno, and at a high elevation site (Peavine Peak, elev. 2515 m) adjacent to Reno from December 2013 to October 2014. A model 602 BetaPlus Teledyne Advanced Pollution Instrumentation (TAPI, San Diego, CA USA) particulate measurement system was used to collect particulate matter on a 47 mm diameter cation exchange membrane (CEM, PN# MSTGS3R Mustang S, Pall Corp. Port Washington, NY) at a rate of 16.7 lpm for 24 hours to four days. Particulate concentrations were calculated using beta attenuation across the filters (non-destructive to filter material); the CEM filters were then analyzed for total Hg on a Tekran Total Hg Analysis system (model 2600, Tekran Instruments Corp. Knoxville, TN, USA). Concurrently, samples were collected on an active Hg membrane system. The active Hg membrane system consisted of 3 CEM filters sampling at a rate of 1 lpm for one to two weeks. CEM filters were then analyzed on the Tekran 2600. A Tekran speciation unit (model 1130, 1135, 2537) was also in operation and ambient air samples were analyzed for gaseous elemental Hg (GEM), gaseous oxidized Hg (GOM), and particulate bound Hg (PBM). Both the 602 BetaPlus system and the active Hg membrane system should collect RM on the CEM filters. The active Hg membrane system most likely captures mainly GOM based on previous tests with the Teflon inlet setup that indicated there was high static electricity effective in removing particulate matter. Flow rate and length of measurement (24 hours vs. four days) affected the Hg concentrations on the 602 BetaPlus system. Based on these measurements we hypothesize that, due to the high flow rate, and therefore short retention time, the 602 BetaPlus only captured PBM. It is also possible that there was loss of Hg to inlet walls due to the longer inlet on the 602 BetaPlus system

  5. Charcoal as an alternative energy source. sub-project: briquetting of charcoal

    SciTech Connect

    Enstad, G.G.

    1982-02-02

    Charcoal briquettes have been studied both theoretically and experimentally. It appears most realistic to use binders in solution. Binders of this kind have been examined and the briquettes' mechanical properties measured. Most promising are borresperse, gum arabic, dynolex, and wood tar.

  6. Passive and active membrane properties contribute to the temporal filtering properties of midbrain neurons in vivo.

    PubMed

    Fortune, E S; Rose, G J

    1997-05-15

    This study examined the contributions of passive and active membrane properties to the temporal selectivities of electrosensory neurons in vivo. The intracellular responses to time-varying (2-30 Hz) electrosensory stimulation and current injection of 27 neurons in the midbrain of the weakly electric fish Eigenmannia were recorded. Each neuron was filled with biocytin to reveal its anatomy. Neurons were divided into two biophysically distinct groups based on their frequency-dependent responses to sinusoidal current injection over the range 2-30 Hz. Fourteen neurons showed low-pass filtering, with a maximum decline in the amplitude of voltage responses of >2.6 dB (X = 4.30 dB, s = 1.10 dB) to sinusoidal current injection. These neurons also showed low-pass filtering of electrosensory information but with larger maximum declines in postsynaptic potential amplitude (X = 9.53 dB, s = 3.34 dB; n = 10). These neurons had broad dendritic arbors and relatively spiny dendrites. Five neurons showed all-pass filtering, having maximum decline in the amplitude of voltage responses of <2.0 dB (X = 1.16 dB, s = 0.61 dB). For electrosensory stimuli, however, these neurons showed low-, band-, or high-pass filtering. These neurons had small dendritic arbors and few or no spines. Voltage-dependent "active" conductances were revealed in eight neurons by using several levels of current clamp. In four of these neurons, the duration of the voltage-dependent conductances decreased in concert with the period of the electrosensory stimulus, whereas in the other four neurons the duration of the voltage-dependent conductances was relatively short (<30 msec) and nearly constant across sensory stimulation frequencies. These conductances enhanced the temporal filtering properties of neurons. PMID:9133400

  7. Active slag filters-simple and sustainable phosphorus removal from wastewater using steel industry byproduct.

    PubMed

    Pratt, C; Shilton, A

    2010-01-01

    Active filtration, where effluent is passed through a reactive substrate such as steel slag, offers a simple and cost-effective option for removing phosphorus (P) from effluent. This work summarises a series of studies that focused on the world's only full-scale active slag filter operated through to exhaustion. The filter achieved 75% P-removal during its first 5 years, reaching a retention capacity of 1.23 g P/kg slag but then its performance sharply declined. Scanning electron microscopy, X-ray diffraction, X-ray fluorescence, and chemical extractions revealed that P sequestration was primarily achieved via adsorption onto iron (Fe) oxyhydroxides on the slag's surface. It was concluded that batch equilibrium tests, whose use has been repeatedly proposed in the literature, cannot be used as an accurate predictor of filter adsorption capacity because Fe oxyhydroxides form via chemical weathering in the field, and laboratory tests don't account for this. Research into how chemical conditions affect slag's P retention capacity demonstrated that near-neutral pH and high redox are optimal for Fe oxyhydroxide stability and overall filter performance. However, as Fe oxyhydroxide sites fill up, removal capacity becomes exhausted. Attempts to regenerate P removal efficiency using physical techniques proved ineffective contrary to dogma in the literature. Based on the newly-developed understanding of the mechanisms of P removal, chemical regeneration techniques were investigated and were shown to strip large quantities of P from filter adsorption sites leading to a regenerated P removal efficiency. This raises the prospect of developing a breakthrough technology that can repeatedly remove and recover P from effluent. PMID:20962385

  8. Design and real time implementation of fuzzy switched controller for single phase active power filter.

    PubMed

    Afghoul, Hamza; Krim, Fateh; Chikouche, Djamel; Beddar, Antar

    2015-09-01

    This paper proposes a novel fuzzy switched controller (FSC) integrated in direct current control (DCC) algorithm for single phase active power filter (SPAPF). The controller under study consists of conventional PI controller, fractional order PI controller (FO-PI) and fuzzy decision maker (FDM) that switches between them using reduced fuzzy logic control. The proposed controller offers short response time with low damping and deals efficiently with the external disturbances while preserving the robustness properties. To fulfill the requirements of power quality, unity power factor and harmonics limitations in active power filtering an experimental test bench has been built using dSPACE 1104 to demonstrate the feasibility and effectiveness of the proposed controller. The obtained results present high performance in steady and transient states. PMID:26233491

  9. Active plasmonic band-stop filters based on graphene metamaterial at THz wavelengths.

    PubMed

    Wei, Zhongchao; Li, Xianping; Yin, Jianjun; Huang, Rong; Liu, Yuebo; Wang, Wei; Liu, Hongzhan; Meng, Hongyun; Liang, Ruisheng

    2016-06-27

    Active plasmonic band-stop filters based on single- and double-layer doped graphene metamaterials at the THz wavelengths are proposed and investigated numerically by using the finite-difference time-domain (FDTD) method. The metamaterial unit cell structure is composed of two parallel graphene nanoscale ribbons. Simulated results exhibit that significant resonance wavelength shifts can be achieved with a slight variation of the doping concentration of the graphene ribbons. Besides, the asymmetry double-layer graphene metamaterial device has two apparent filter dips while the symmetry single-, double-layer and asymmetry single-layer graphene metamaterial devices just only one. The metamaterials with symmetry single-layer and asymmetry double-layer graphene can be used as a high-sensitivity refractive sensor with the sensitivity up to 5100 nm/RIU and a two-circuit switch, respectively. These prospects pave the way towards ultrafast active graphene-based plasmonic devices for THz applications. PMID:27410588

  10. DETECTING ACTIVE GALACTIC NUCLEI USING MULTI-FILTER IMAGING DATA. II. INCORPORATING ARTIFICIAL NEURAL NETWORKS

    SciTech Connect

    Dong, X. Y.; De Robertis, M. M.

    2013-10-01

    This is the second paper of the series Detecting Active Galactic Nuclei Using Multi-filter Imaging Data. In this paper we review shapelets, an image manipulation algorithm, which we employ to adjust the point-spread function (PSF) of galaxy images. This technique is used to ensure the image in each filter has the same and sharpest PSF, which is the preferred condition for detecting AGNs using multi-filter imaging data as we demonstrated in Paper I of this series. We apply shapelets on Canada-France-Hawaii Telescope Legacy Survey Wide Survey ugriz images. Photometric parameters such as effective radii, integrated fluxes within certain radii, and color gradients are measured on the shapelets-reconstructed images. These parameters are used by artificial neural networks (ANNs) which yield: photometric redshift with an rms of 0.026 and a regression R-value of 0.92; galaxy morphological types with an uncertainty less than 2 T types for z ≤ 0.1; and identification of galaxies as AGNs with 70% confidence, star-forming/starburst (SF/SB) galaxies with 90% confidence, and passive galaxies with 70% confidence for z ≤ 0.1. The incorporation of ANNs provides a more reliable technique for identifying AGN or SF/SB candidates, which could be very useful for large-scale multi-filter optical surveys that also include a modest set of spectroscopic data sufficient to train neural networks.

  11. Assessing the mineralisation of charcoal carbon in temperate soils

    NASA Astrophysics Data System (ADS)

    Ascough, P. L.; Tilston, E.; Garnett, M.

    2012-04-01

    Charcoal is pyrolized biomass characterized by its high C content and environmental recalcitrance. Recently 'biochar' has emerged as a concept as a means of long-term C sequestration with a sequestration potential that is comparable with current global anthropogenic fossil fuel emissions (5.5-9.5 Pg C yr-1 and 5.4 Pg C yr-1, respectively). However, charcoal is not a permanent C sink and estimates of charcoal degradation rates vary from the decadal or centennial timescales, with soil residence times in the order of thousands of years. Possible mechanisms of charcoal degradation include biotically and abiotically-mediated transformation and mineralization processes, resulting in a range of products of varying recalcitrance, including CO2. In soil science the decomposition of organic matter is routinely estimated by measuring CO2 efflux, but a key obstacle for the quantification of charcoal-derived CO2 is the accurate and precise apportionment of C sources arising from slow decomposition rates. Moreover, the addition of charcoal to soil can promote decomposition of indigenous soil organic matter and the concomitant increase in CO2 production does not therefore necessarily demonstrate mineralization of the charcoal C. Radiocarbon (14C) offers significant benefits in this regard as a sensitive technique for C source apportionment. We used the 14C content of CO2 respired by a surface soil to quantify the rate of charcoal mineralization, thus demonstrating the efficacy and sensitivity of our 14C approach for estimating charcoal degradation. During incubation the variations in charcoal-derived C mineralization are consistent with the loss of more labile components in the charcoal with a maximum of 2.1% of the evolved CO2-C being attributable to mineralisation of charcoal C. Extrapolation to an annual basis suggests that the loss rate of charcoal C is <1%, supporting the view that rates of charcoal C respiration are slow in temperate woodland soil. Implications for

  12. Microscopic charcoal as a fossil indicator of fire

    NASA Astrophysics Data System (ADS)

    Patterson, William A.; Edwards, Kevin J.; Maguire, David J.

    Charcoal preserved in lake sediments, peat, and soils provides a record of past fire occurrence. An understanding of fire history is important in evaluating interactions between vegetation, climate and human disturbances through at least the last several millennia. In this paper we review information concerning the production, dispersal, sedimentation and preservation of charcoal. We present examples of studies that have used charcoal analysis in palaeoecological reconstructions, with special emphasis on analytical techniques and problems of interpretation. Unlike pollen, which is produced continuously in fairly constant amounts, charcoal is produced in large quantities but at irregular intervals. These are a function of fire regimes that are often unique to specific vegetation types and/or climatic regions. Charcoal particles vary in size from sub-microscopic to macroscopic, with small particles presumably being transported further by wind and water than large particles. Charcoal preserves well, but it may be subject to breakage, especially when transported by water. We present theoretical models of dispersal and discuss potential problems associated with post-depositional mixing. A variety of charcoal analysis techniques have been employed during the past four decades. Most involve microscopic identification and quantification of numbers or size of individual fragments occurring in samples prepared for pollen analysis. The most commonly used method — estimating charcoal area by categorizing particles in several size classes — is both tedious and time consuming, and recently introduced techniques attempt to estimate past fire occurrence based upon point count estimation, elemental carbon analysis, magnetic measurement of sediments, electron microscope, and spectrographic analyses. A lack of standardization both within and among analysis techniques has hampered interpretation of charcoal profiles. Taphonomic processes affecting charcoal are less well understood

  13. Post-Arterial Filter Gaseous Microemboli Activity of Five Integral Cardiotomy Reservoirs during Venting: An In Vitro Study

    PubMed Central

    Myers, Gerard J.; Voorhees, Cheri; Haynes, Rob; Eke, Bob

    2009-01-01

    Abstract: During a previously published study on gaseous micro-emboli (GMEs) and perfusionist interventions, it was noted that emboli could be detected after the arterial filter when blood/air challenges entered the membrane oxygenator’s integral cardiotomy. The findings indicated that further study into the oxygenator’s integral cardiotomy reservoir was warranted. This is the first know published report that connects the vent return to GME activity after the arterial filter. To study the air handling ability of the membranes integral cardiotomy, an in vitro study was conducted on five hard shell coated membrane oxygenators (Terumo Capiox SX25, X coated; Sorin Synthesis, phosphorylcholine coated; Gish Vision, GBS coated; Medtronic Affinity NT, trillium coated; Maquet Quadrox, bioline coated). The oxygenators were matched with their own manufacturer’s coated arterial filters (Medtronic 351T Arterial Filter, Sorin Synthesis Integrated Arterial Filter, Terumo CXAF200X Arterial Filter, Gish GAF40GBS-2 Arterial Filter, and Maquet Quart HBF140 Arterial Filter). There were three arms to the study, and three separate oxygenator/filter combinations were used in each arm. The first arm consisted of a pump flow of 4.0 L/min with only the filter purge blood entering the integral cardiotomy. In the second arm, 500 mL/min of simulated vent blood was added to the filter purge blood entering the integral cardiotomy. During the final arm, 200 mL/min of air was added to the vent blood as it entered the integral cardiotomy, to more closely simulate vent return during cardiopulmonary bypass. All GME activity in the oxygenator/filter combinations was examined using the Hatteland CMD20 Microemboli Counter. Placement of the Hatteland probes was 4 in after the hard shell reservoir outlet (PRO) and 12 in after the arterial filter (PAF). When vent blood flow was turned on, there was a significant increase in the PRO microemboli activity detected in all reservoirs. In the PAF position

  14. Control of a pneumatic power active lower-limb orthosis with filter-based iterative learning control

    NASA Astrophysics Data System (ADS)

    Huang, Chia-En; Chen, Jian-Shiang

    2014-05-01

    A filter-based iterative learning control (FILC) scheme is developed in this paper, which consists in a proportional-derivative (PD) feedback controller and a feedforward filter. Moreover, based on two-dimensional system theory, the stability of the FILC system is proven. The design criteria for a wavelet transform filter (WTF) - chosen as the feedforward filter - and the PD feedback controller are also given. Finally, using a pneumatic power active lower-limb orthosis (PPALO) as the controlled plant, the wavelet-based iterative learning control (WILC) implementation and the orchestration of a trajectory tracking control simulation are given in detail and the overall tracking performance is validated.

  15. Simplified greywater treatment systems: Slow filters of sand and slate waste followed by granular activated carbon.

    PubMed

    Zipf, Mariah Siebert; Pinheiro, Ivone Gohr; Conegero, Mariana Garcia

    2016-07-01

    One of the main actions of sustainability that is applicable to residential, commercial, and public buildings is the rational use of water that contemplates the reuse of greywater as one of the main options for reducing the consumption of drinking water. Therefore, this research aimed to study the efficiencies of simplified treatments for greywater reuse using slow sand and slow slate waste filtration, both followed by granular activated carbon filters. The system monitoring was conducted over 28 weeks, using analyses of the following parameters: pH, turbidity, apparent color, biochemical oxygen demand (BOD), chemical oxygen demand (COD), surfactants, total coliforms, and thermotolerant coliforms. The system was run at two different filtration rates: 6 and 2 m(3)/m(2)/day. Statistical analyses showed no significant differences in the majority of the results when filtration rate changed from 6 to 2 m(3)/m(2)/day. The average removal efficiencies with regard to the turbidity, apparent color, COD and BOD were 61, 54, 56, and 56%, respectively, for the sand filter, and 66, 61, 60, and 51%, respectively, for the slate waste filter. Both systems showed good efficiencies in removing surfactants, around 70%, while the pH reached values of around 7.80. The average removal efficiencies of the total and thermotolerant coliforms were of 61 and 90%, respectively, for the sand filter, and 67 and 80%, respectively, for the slate waste filter. The statistical analysis found no significant differences between the responses of the two systems, which attest to the fact that the slate waste can be a substitute for sand. The maximum levels of efficiency were high, indicating the potential of the systems, and suggesting their optimization in order to achieve much higher average efficiencies. PMID:27045540

  16. Polycyclic aromatic hydrocarbons from wood pyrolyis in charcoal production furnaces.

    PubMed

    Barbosa, Joyce Mara dos Santos; Ré-Poppi, Nilva; Santiago-Silva, Mary

    2006-07-01

    Polycyclic aromatic hydrocarbons (PAH) were measured in smoke samples from wood carbonization during charcoal production, in both particulate matter (PM) and gaseous phases. Samples were acquired using a medium-volume air sampler at 1.5 m distance from the furnace. Particle-bound PAH were collected on Fluoropore polytetrafluoroethylene filters and gas-phase PAH were collected into sorbent tubes with XAD-2 resin. PAH were extracted with dichloromethane-methanol and analyzed using gas chromatography-mass spectrometry. The results showed total emission from the furnace of 26 microg/m3 for the 16 PAH and 2.8 microg/m3 for the 10 genotoxic PAH (from fluoranthene to benzo[g,h,i]perylene). High emission of 16 PAH in the first 8 h of wood carbonization was detected (64 microg/m3; 56% of the total emission). Associated with PM, 11% of the total emission of 16 PAH (in both phases) and 60% of 10 genotoxic PAH were found. Relative ratios (for example, [Phe]/[Phe]+[Ant]) for the PAH of the same molecular weight were obtained and compared with the published data. The concentrations of benzo[a]pyrene equivalent (BaP(eq)) were estimated using the list of toxic equivalent factors suggested by . The values of 0.30 and 0.06 mg/m3 were obtained for the total concentrations of BaP(eq) in PM and gaseous phase, respectively. PMID:16499903

  17. Metal content of charcoal in mining-impacted wetland sediments.

    PubMed

    Baker, Leslie L; Strawn, Daniel G; Rember, William C; Sprenke, Kenneth F

    2011-01-01

    Charcoal is well known to accumulate contaminants, but its association with metals and other toxic elements in natural settings has not been well studied. Association of contaminants with charcoal in soil and sediment may affect their mobility, bioavailability, and fate in the environment. In this paper, natural wildfire charcoal samples collected from a wetland site that has been heavily contaminated by mine waste were analyzed for elemental contents and compared to the surrounding soil. Results showed that the charcoal particles were enriched over the host soils by factors of two to 40 times in all contaminant elements analyzed. Principal component analysis was carried out on the data to determine whether element enrichment patterns in the soil profile charcoal are related to those in the soils. The results suggest that manganese and zinc concentrations in charcoal are controlled by geochemical processes in the surrounding soil, whereas the concentrations of arsenic, lead, zinc, iron, phosphorus, and sulfur in charcoal are unrelated to those in the surrounding soil. This study shows evidence that charcoal in soils can have a distinct and important role in controlling contaminant speciation and fate in the environment. PMID:21093017

  18. Evaluation of soybean genotypes for resistance to charcoal rot

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Charcoal rot caused by Macrophomina phaseolina causes more yield loss in soybean than most other diseases in the southern U.S.A. There are no commercial genotypes marketed as resistant to charcoal rot of soybean. Reactions of 27 maturity group (MG) III, 29 Early MG IV, 34 Late MG IV, and 59 MG V gen...

  19. [Adsorption mechanism of furfural onto modified rice husk charcoals].

    PubMed

    Deng, Yong; Wang, Xianhua; Li, Yunchao; Shao, Jing'ai; Yang, Haiping; Chen, Hanping

    2015-10-01

    To evaluate the absorptive characteristics of furfural onto biomass charcoals derived from rice husk pyrolysis, we studied the information of the structure and surface chemistry properties of the rice husk charcoals modified by thermal treatment under nitrogen and carbon dioxide flow and adsorption mechanism of furfural. The modified samples are labeled as RH-N2 and RH-CO2. Fresh rice husk charcoal sample (RH-450) and modified samples were characterized by elemental analysis, nitrogen adsorption-desorption isotherms, Fourier-transform infrared spectroscopy and Boehm titration. The results show that fresh rice husk charcoal obtained at 450 degrees C had a large number of organic groups on its surface and poor pore structure. After the modification under nitrogen and carbon dioxide flow, oxygenic organics in rice husk charcoals decompose further, leading to the reduction of acidic functional groups on charcoals surface, and the increase of the pyrone structures of the basic groups. Meanwhile, pore structure was improved significantly and the surface area was increased, especially for the micropores. This resulted in the increase of π-π dispersion between the surfaces of rice husk charcoals and furfural molecular. With making comprehensive consideration of π-π dispersion and pore structure, the best removal efficiency of furfural was obtained by rice husk charcoal modified under carbon dioxide flow. PMID:26964338

  20. Characterization of charcoals for helium cryopumping in fusion devices

    NASA Astrophysics Data System (ADS)

    Sedgley, D. W.; Tobin, A. G.; Batzer, T. H.; Call, W. R.

    1987-07-01

    The capability of charcoal as a sorbent for helium at cryogenic temperatures depends upon charcoal characteristics that are not well understood. Previous work by the authors has indicated that the charcoals- pumping capability for helium depends as much on their source as on their particle size distributions. To develop a correlation between the physical characteristics of charcoal and helium pumping performance, different charcoals based on wood, coal, coconut, and a petroleum by-product were obtained from commercial sources. They were bonded to an aluminum substrate, and cooled to liquid-helium temperatures in a vacuum chamber. The helium pumping speed at constant throughput versus quantity of helium absorbed was measured for each charcoal grade. Porosimetry measurements on each charcoal grade using nitrogen as the sorbent gas were made that included total surface area, adsorption and desorption isotherms, and pore area and pore volume distributions. Significant differences in helium pumping performance and in pore size distribution were observed. Comparisons are made between helium pumping performance and charcoal characteristics and a possible correlation is identified.

  1. Characterization of charcoals for helium cryopumping in fusion devices

    SciTech Connect

    Sedgley, D.W.; Tobin, A.G.; Batzer, T.H.; Call, W.R.

    1987-07-01

    The capability of charcoal as a sorbent for helium at cryogenic temperatures depends upon charcoal characteristics that are not well understood. Previous work by the authors has indicated that the charcoals' pumping capability for helium depends as much on their source as on their particle size distributions. To develop a correlation between the physical characteristics of charcoal and helium pumping performance, different charcoals based on wood, coal, coconut, and a petroleum by-product were obtained from commercial sources. They were bonded to an aluminum substrate, and cooled to liquid-helium temperatures in a vacuum chamber. The helium pumping speed at constant throughput versus quantity of helium absorbed was measured for each charcoal grade. Porosimetry measurements on each charcoal grade using nitrogen as the sorbent gas were made that included total surface area, adsorption and desorption isotherms, and pore area and pore volume distributions. Significant differences in helium pumping performance and in pore size distribution were observed. Comparisons are made between helium pumping performance and charcoal characteristics and a possible correlation is identified.

  2. Resistance to charcoal rot identified in ancestral soybean germplasm

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Charcoal rot, caused by the fungal pathogen Macrophomina phaseolina, is an economically important disease on soybean and other crops including maize, sorghum, and sunflowers. Without effective cultural or chemical options to control charcoal rot in soybean, finding sources of genetic resistance is o...

  3. EMISSIONS OF AIR TOXICS FROM A SIMULATED CHARCOAL KILN

    EPA Science Inventory

    The report gives results of experiments in a laboratory-scale charcoal kiln simulator to evaluate emissions of hazardous air pollutants from the production of charcoal in Missouri-type kilns. Fixed combustion gases were measured using continuous monitors. In Addition, other pollu...

  4. Superfund record of decision amendment (EPA Region 4): Wrigley Charcoal Superfund Site, Hickman County, Wrigley, TN, February 2, 1995

    SciTech Connect

    1995-03-01

    This decision document presents the selected Interim Remedial Action (IRA) for the Wrigley Charcoal Site, in Wrigley, Hickman County, Tennessee. The U.S. EPA has modified a wide variety of items that require immediate response action for the first step of cleanup activities to be taken at the Wrigley Charcoal Site. The major goal of these cleanup activities is to address the most serious threats at the Wrigley Charcoal Site by removing contaminated media from the Primary Site flood plain, remediating wastes at the Storage Basin, and through limited access restrictions at the Primary Site and the Storage Basin. The cleanup activities as presented in this IRA Record of Decision (ROD) Amendment will achieve significant risk reduction and will prepare the Site for future remedial activities.

  5. An equilibrium-based model for measuring environmental radon using charcoal canisters.

    PubMed

    Lehnert, A L; Kearfott, K J

    2010-08-01

    Radon in indoor air is often measured using canisters of activated charcoal that function by adsorbing radon gas. The use of a diffusion barrier charcoal canister (DBCC) minimizes the effects of environmental humidity and extends the useful exposure time by several days. Many DBCC protocols model charcoal canisters as simple integrating detectors, which introduces errors due to the fact that radon uptake changes over the exposure period. Errors are compensated for by calculating a calibration factor that is nonlinear with respect to exposure time. This study involves the development and testing of an equilibrium-based model and corresponding measurement protocol that treats the charcoal canisters as a system coming into equilibrium with the surrounding radon environment. This model applies to both constant and temporally varying radon concentration situations, which was essential, as efforts are currently underway using a temporally varying radon chamber. It was found that the DBCCs equilibrate following the relationship E = (1 - e) where E is a measure of how close the DBCC is to equilibrium, t is exposure time, and q is the equilibration constant. This equilibration constant was empirically determined to be 0.019 h. The proposed model was tested in a blind test as well as compared with the currently accepted U.S. Environmental Protection Agency (U.S. EPA) model. Comparisons between the two methods showed a slight decrease in measurement error when using the equilibrium-based method as compared to the U.S. EPA method. PMID:20622564

  6. Effects of historic charcoal burning on soil properties

    NASA Astrophysics Data System (ADS)

    Hirsch, Florian; Schneider, Anna; Raab, Alexandra; Raab, Thomas; Buras, Allan; van der Maaten, Ernst; Takla, Melanie; Räbiger, Christin; Cruz Garcia, Roberto; Wilmking, Martin

    2015-04-01

    In Northeastern Germany the production of ironware between the 16th and 19th century left behind a remarkable amount of charcoal kiln remains. At the study site in the forests north of Cottbus, Rubic Brunic Arenosols are developed on Weichselian glaciofluvial deposits. Remote sensing surveys, underpinned by archaeological studies, show that charcoal was gained from several thousand kilns. The round charcoal kiln remains with inner diameters up to 20 m are smooth platforms elevated a few decimeters higher than the surrounding area. The remaining mounds consist of an about 40 cm thick sheet containing residuals of the charcoal production process such as charcoal fragments, ash but also organic material covering the Rubic Brunic Arenosols. The charcoal kiln remains are distanced only up to 100 m from each other. For the 32 square kilometers large study site, the ground area covered by such charcoal production residuals is about 0.5 square kilometer, i.e. 1.5% of the study area. The charcoal kiln sites are a remarkable carbon accumulator on the sandy parent material. Against this background, we aim to characterize the effects of pyrolysis and the enrichment of carbon, induced by the charcoal production, on soil properties. Field work was done during archaeological rescue excavations on three charcoal kiln relicts having diameters of about 15 m. We applied 150 l of Brilliant Blue solution on six 1 square meter plots (three inside, three outside of the charcoal kiln mound) and afterwards trenched horizontal and vertical profiles for recording the staining patterns. Undisturbed soil samples to study soil micromorphology and further undisturbed samples for characterizing soil physical and hydraulic properties were taken. Outside of the charcoal kiln remain the Brilliant Blue solution drained within less than 10 minutes, whereas on the charcoal kiln remains the draining took between 20 and 40 minutes. Preliminary laboratory analyses underline the findings from the field and

  7. Particulate activity accumulated on a moving filter and RCS leak detection.

    PubMed

    Peng, Wu-Hung

    2012-08-01

    Analytical equations for calculating the particulate activity accumulated on a moving filter of a containment air particulate radiation monitor due to a reactor coolant system leak in the containment, including the noble gas decay products, were presented. The particulate airborne concentration in the containment was treated by assumptions of a constant reactor coolant leak rate at a constant concentration, a given aerosolizing fraction, a constant removal coefficient to account for the loss due to diffusion, settling, diffusiophoresis, and containment air recirculation operation. The ratio of moving-to-fixed filter activity was presented for radionuclide of various half-lives and for different filter moving speeds. The monitor response at one hour after the initiation of a 1-gallon per minute leak at measured reactor coolant concentrations was compared to the standard deviation of the background count rate for an operating pressurized water reactor. The detectability of a 1-gallon per minute leak in an hour can be demonstrated if the aerosolization percentage of the radionuclide in the leaked coolant is at least a few percent. PMID:22739972

  8. Tracking performance of unbalanced QPSK demodulators. II - Biphase Costas loop with active arm filters

    NASA Technical Reports Server (NTRS)

    Simon, M. K.

    1978-01-01

    In a Costas loop study for biphase modulation conducted by Simon and Lindsey (1977), it was demonstrated that considerable improvement in tracking performance could be obtained by employing active arm filters of the integrate-and-dump type as opposed to passive arm filters. An investigation is conducted concerning the possibility to obtain a similar performance improvement for an unbalanced quadriphase-shift-keying (QPSK) modulation. It is found that the biphase Costas loop can be used as an efficient demodulator of QPSK in cases in which the ratio of data rates is of the same order of magnitude as the inverse of the power ratio. These cases involve approximately equal signal energies in the two channels.

  9. Thermal Filters for the ATHENA X-IFU: Ongoing Activities Toward the Conceptual Design

    NASA Astrophysics Data System (ADS)

    Barbera, Marco; Argan, A.; Bozzo, E.; Branduardi-Raymont, G.; Ciaravella, A.; Collura, A.; Cuttaia, F.; Gatti, F.; Jimenez Escobar, A.; Lo Cicero, U.; Lotti, S.; Macculi, C.; Mineo, T.; Nuzzo, F.; Paltani, S.; Parodi, G.; Piro, L.; Rauw, G.; Sciortino, L.; Sciortino, S.; Villa, F.

    2016-02-01

    ATHENA is the L2 mission selected by ESA to pursue the science theme "Hot and Energetic Universe." One of the two focal plane instruments is the X-ray Integral Field Unit, an array of TES microcalorimeters operated at T < 100 mK. To allow the X-ray photons focused by the telescope to reach the detector, windows have to be opened on the cryostat thermal shields. X-ray transparent filters need to be mounted on these open windows to attenuate the IR radiation from warm surfaces, to attenuate RF electromagnetic interferences on TES sensors and SQUID electronics, and to protect the detector from contamination. This paper reviews the ongoing activities driving the design of the X-IFU thermal filters.

  10. Thermal Filters for the ATHENA X-IFU: Ongoing Activities Toward the Conceptual Design

    NASA Astrophysics Data System (ADS)

    Barbera, Marco; Argan, A.; Bozzo, E.; Branduardi-Raymont, G.; Ciaravella, A.; Collura, A.; Cuttaia, F.; Gatti, F.; Jimenez Escobar, A.; Lo Cicero, U.; Lotti, S.; Macculi, C.; Mineo, T.; Nuzzo, F.; Paltani, S.; Parodi, G.; Piro, L.; Rauw, G.; Sciortino, L.; Sciortino, S.; Villa, F.

    2016-08-01

    ATHENA is the L2 mission selected by ESA to pursue the science theme "Hot and Energetic Universe." One of the two focal plane instruments is the X-ray Integral Field Unit, an array of TES microcalorimeters operated at T < 100 mK. To allow the X-ray photons focused by the telescope to reach the detector, windows have to be opened on the cryostat thermal shields. X-ray transparent filters need to be mounted on these open windows to attenuate the IR radiation from warm surfaces, to attenuate RF electromagnetic interferences on TES sensors and SQUID electronics, and to protect the detector from contamination. This paper reviews the ongoing activities driving the design of the X-IFU thermal filters.

  11. Design of high pressure oxygen filter for extravehicular activity life support system, volume 1

    NASA Technical Reports Server (NTRS)

    Wilson, B. A.

    1977-01-01

    The experience of the National Aeronautics and Space Administration (NASA) with extravehicular activity life support emergency oxygen supply subsystems has shown a large number of problems associated with particulate contamination. These problems have resulted in failures of high pressure oxygen component sealing surfaces. A high pressure oxygen filter was designed which would (a) control the particulate contamination level in the oxygen system to a five-micron glass bead rating, ten-micron absolute condition (b) withstand the dynamic shock condition resulting from the sudden opening of 8000 psi oxygen system shutoff valve. Results of the following program tasks are reported: (1) contaminant source identification tests, (2) dynamic system tests, (3) high pressure oxygen filter concept evaluation, (4) design, (5) fabrication, (6) test, and (7) application demonstration.

  12. Influence of charcoal burning induced pyrolysis on soils

    NASA Astrophysics Data System (ADS)

    Hirsch, Florian; Nicolay, Alexander; Pötzsch, Bastian; Fritzsche, Marie; Raab, Alexandra; Raab, Thomas

    2014-05-01

    In Lusatia, Northeastern Germany, the production of ironware between the 16th and 19th century left behind a remarkable amount of charcoal kilns in the forests north of Cottbus. Remote sensing surveys, underpinned by archaeological studies, show that charcoal was gained around Cottbus from several thousand charcoal kilns which had internal diameters up to 20 m. For the study site with 35 km2 area, the until now prospected total ground area below the charcoal kilns which was potentially affected by the pyrolysis is about 0,5 km2. Historic data indicates that the pyrolysis in the charcoal kiln took up to several weeks, for the kilns with a diameter of 20 m about 20 days. To characterize the depth of thermal alteration of soils below the kiln our current focus is on the differentiation of the iron hydroxides by small-scale vertical analysis of soil profiles. The study site is situated 16 km northeast of Cottbus at the opencast mine Jänschwalde. Field work was done during the archaeological rescue excavation of a charcoal kiln in a 50 m long trench crossing an about 15 m wide charcoal kiln. One vertical profile outside the charcoal kiln and two vertical profiles below the charcoal kiln were chosen for analysis. The magnetic susceptibility was measured in situ on the undisturbed profile and ex situ on stepwise heated samples (105, 350, 550, 750 and 950°C). The total iron content was quantified ex situ by x-ray fluorescence. Our first results indicate a change in the magnetic susceptibility in the contact area of the mineral soil and the charcoal kiln. The influence of the pyrolysis on the soil is restricted to areas where the soil was not shielded against the heat by ash or organic material.

  13. Automated detection of lung tumors in PET/CT images using active contour filter

    NASA Astrophysics Data System (ADS)

    Teramoto, Atsushi; Adachi, Hayato; Tsujimoto, Masakazu; Fujita, Hiroshi; Takahashi, Katsuaki; Yamamuro, Osamu; Tamaki, Tsuneo; Nishio, Masami; Kobayashi, Toshiki

    2015-03-01

    In a previous study, we developed a hybrid tumor detection method that used both computed tomography (CT) and positron emission tomography (PET) images. However, similar to existing computer-aided detection (CAD) schemes, it was difficult to detect low-contrast lesions that touch to the normal organs such as the chest wall or blood vessels in the lung. In the current study, we proposed a novel lung tumor detection method that uses active contour filters to detect the nodules deemed "difficult" in previous CAD schemes. The proposed scheme detects lung tumors using both CT and PET images. As for the detection in CT images, the massive region was first enhanced using an active contour filter (ACF), which is a type of contrast enhancement filter that has a deformable kernel shape. The kernel shape involves closed curves that are connected by several nodes that move iteratively in order to enclose the massive region. The final output of ACF is the difference between the maximum pixel value on the deformable kernel, and pixel value on the center of the filter kernel. Subsequently, the PET images were binarized to detect the regions of increased uptake. The results were integrated, followed by the false positive reduction using 21 characteristic features and three support vector machines. In the experiment, we evaluated the proposed method using 100 PET/CT images. More than half of nodules missed using previous methods were accurately detected. The results indicate that our method may be useful for the detection of lung tumors using PET/CT images.

  14. Development of biomass in a drinking water granular active carbon (GAC) filter.

    PubMed

    Velten, Silvana; Boller, Markus; Köster, Oliver; Helbing, Jakob; Weilenmann, Hans-Ulrich; Hammes, Frederik

    2011-12-01

    Indigenous bacteria are essential for the performance of drinking water biofilters, yet this biological component remains poorly characterized. In the present study we followed biofilm formation and development in a granular activated carbon (GAC) filter on pilot-scale during the first six months of operation. GAC particles were sampled from four different depths (10, 45, 80 and 115 cm) and attached biomass was measured with adenosine tri-phosphate (ATP) analysis. The attached biomass accumulated rapidly on the GAC particles throughout all levels in the filter during the first 90 days of operation and maintained a steady state afterward. Vertical gradients of biomass density and growth rates were observed during start-up and also in steady state. During steady state, biomass concentrations ranged between 0.8-1.83 x 10(-6) g ATP/g GAC in the filter, and 22% of the influent dissolved organic carbon (DOC) was removed. Concomitant biomass production was about 1.8 × 10(12) cells/m(2)h, which represents a yield of 1.26 × 10(6) cells/μg. The bacteria assimilated only about 3% of the removed carbon as biomass. At one point during the operational period, a natural 5-fold increase in the influent phytoplankton concentration occurred. As a result, influent assimilable organic carbon concentrations increased and suspended bacteria in the filter effluent increased 3-fold as the direct consequence of increased growth in the biofilter. This study shows that the combination of different analytical methods allows detailed quantification of the microbiological activity in drinking water biofilters. PMID:21982281

  15. Method of filtering

    SciTech Connect

    White, H.R.

    1985-04-09

    This invention provides a non-fibrous combustible filter aid for vacuum pre-coat filter units which is effective to maintain a filter bed coating on rotary filter drums just sufficiently porous to pass the liquid of a slurry while retaining the slurry solids thereon and is capable of being scraped off the bed in thin film form with the slurry solids thereon. The filter aid comprises relatively non-compressible non-fibrous granular charcoal or nut shell particles having a dry bulk density from about 0.3 to about 0.6 grams per cubic centimeter, a particle density of about 1.4 to 1.7 grams per cubis centimeter and a particle size range of 30 to 125 microns. The filter aid of this invention is capable of being burned with the solids deposited thereon to recover the heat value thereof or to dispose of the solids, is free from silicates or other non-combustible ingredients, and is devoid of fibers which will interfere with the proper operation of the filter unit.

  16. Sorption of chlorophenols from aqueous solution by granular activated carbon, filter coal, pine and hardwood.

    PubMed

    Hossain, G S M; McLaughlan, R G

    2012-09-01

    Wood and coal, as low-cost sorbents, have been evaluated as an alternative to commercial granular activated carbon (GAC) for chlorophenol removal. Kinetic experiments indicated that filter coal had a significantly lower rate of uptake (approximately 10% of final uptake was achieved after three hours) than the other sorbents, owing to intra-particle diffusion limitations. The data fitted a pseudo-second-order model. Sorption capacity data showed that GAC had a high sorption capacity (294-467 mg g(-1)) compared with other sorbents (3.2-7.5 mg(g-1)). However, wood and coal had a greater sorption capacity per unit surface area than GAC. Sorption equilibrium data was best predicted using a Freundlich adsorption model. The sorption capacity for all sorbents was 2-chlorophenol < 4-chlorophenol < 2, 4-dichlorophenol, which correlates well with solute hydrophobicity, although the relative differences were much less for coal than the other sorbents. The results showed that pine, hardwood and filter coal can be used as sorbent materials for the removal of chlorophenol from water; however, kinetic considerations may limit the application of filter coal. PMID:23240177

  17. Model- based filtering for artifact and noise suppression with state estimation for electrodermal activity measurements in real time.

    PubMed

    Tronstad, Christian; Staal, Odd M; Saelid, Steinar; Martinsen, Orjan G

    2015-08-01

    Measurement of electrodermal activity (EDA) has recently made a transition from the laboratory into daily life with the emergence of wearable devices. Movement and nongelled electrodes make these devices more susceptible to noise and artifacts. In addition, real-time interpretation of the measurement is needed for user feedback. The Kalman filter approach may conveniently deal with both these issues. This paper presents a biophysical model for EDA implemented in an extended Kalman filter. Employing the filter on data from Physionet along with simulated noise and artifacts demonstrates noise and artifact suppression while implicitly providing estimates of model states and parameters such as the sudomotor nerve activation. PMID:26736861

  18. Estrogenic activity of ternary UV filter mixtures in fish (Pimephales promelas) - an analysis with nonlinear isobolograms.

    PubMed

    Kunz, Petra Y; Fent, Karl

    2009-01-01

    Numerous estrogenic compounds are present in aquatic environments, but currently it is not well understood how compounds that differ in maxima and slope of their individual dose-response curves contribute to the overall mixture effect. In order to better understand such interactions we investigated 3 commonly used UV filters, for their estrogenic mixture activity and analysed their joint effects by using the concentration addition (CA) concept. Thereby, we extended the method of isoboles for analysis of 3 compounds that differ in maxima and slopes of their dose-response curves. 3-Benzylidene camphor (3BC), benzophenone-1 (BP1) and benzophenone-2 (BP2) are estrogenic in fish and act as pure- or partial estrogen receptor alpha agonists. First we exposed juvenile fathead minnows for 14 days to six concentrations of each UV filter alone to determine vitellogenin (VTG) induction curves, calculate equi-effective mixture concentrations and predict mixture effects. For 3BC, BP1 and BP2 significant VTG-induction occurred at 420, 2668, and 4715 microg/L, respectively. BP2 displayed a full dose-response curve, whereas 3BC and BP1 showed submaximal activity of 70 and 78%, respectively. Second, we exposed fish to 6 equi-effective mixtures (EC-NOEC, EC1, EC5, EC10, EC20, EC30) of these UV filters. Significant VTG-induction occurred at EC5 and higher. Submaximal activity of 67% as compared to the control EE2 (100 ng/L) was reached. The curves for the observed and predicted mixture activity agreed for mixture levels (EC10 to EC30), however, at EC-NOEC, EC1 and EC5, lower activity was observed than predicted by CA. Detailed isobolographic analysis indicate additivity at EC10 to EC30, and antagonism at low levels (EC-NOEC to EC5). Our data show for the first time, that for compounds with differences in maxima and slope, considerably more mixture combinations are additive than previously thought. This should be taken into account for hazard and risk assessment of UV filters and

  19. Estrogenic activity of ternary UV filter mixtures in fish (Pimephales promelas) - An analysis with nonlinear isobolograms

    SciTech Connect

    Kunz, Petra Y.; Fent, Karl

    2009-01-01

    Numerous estrogenic compounds are present in aquatic environments, but currently it is not well understood how compounds that differ in maxima and slope of their individual dose-response curves contribute to the overall mixture effect. In order to better understand such interactions we investigated 3 commonly used UV filters, for their estrogenic mixture activity and analysed their joint effects by using the concentration addition (CA) concept. Thereby, we extended the method of isoboles for analysis of 3 compounds that differ in maxima and slopes of their dose-response curves. 3-Benzylidene camphor (3BC), benzophenone-1 (BP1) and benzophenone-2 (BP2) are estrogenic in fish and act as pure- or partial estrogen receptor {alpha} agonists. First we exposed juvenile fathead minnows for 14 days to six concentrations of each UV filter alone to determine vitellogenin (VTG) induction curves, calculate equi-effective mixture concentrations and predict mixture effects. For 3BC, BP1 and BP2 significant VTG-induction occurred at 420, 2668, and 4715 {mu}g/L, respectively. BP2 displayed a full dose-response curve, whereas 3BC and BP1 showed submaximal activity of 70 and 78%, respectively. Second, we exposed fish to 6 equi-effective mixtures (EC-NOEC, EC1, EC5, EC10, EC20, EC30) of these UV filters. Significant VTG-induction occurred at EC5 and higher. Submaximal activity of 67% as compared to the control EE2 (100 ng/L) was reached. The curves for the observed and predicted mixture activity agreed for mixture levels (EC10 to EC30), however, at EC-NOEC, EC1 and EC5, lower activity was observed than predicted by CA. Detailed isobolographic analysis indicate additivity at EC10 to EC30, and antagonism at low levels (EC-NOEC to EC5). Our data show for the first time, that for compounds with differences in maxima and slope, considerably more mixture combinations are additive than previously thought. This should be taken into account for hazard and risk assessment of UV filters and

  20. Generation rate of carbon monoxide from burning charcoal.

    PubMed

    Ojima, Jun

    2011-01-01

    Charcoal, often used as cooking fuel at some restaurants, generates a significant amount of carbon monoxide (CO) during its combustion. Every year in Japan, a number of cooks and waiters/waitresses are poisoned by CO emanating from burning charcoal. Although certain ventilation is necessary to prevent the accumulation of CO, it is difficult to estimate the proper ventilation requirement for CO because the generation rate of CO from burning charcoal has not been established. In this study, several charcoals were evaluated in terms of CO generation rate. Sample charcoals were burned in a cooking stove to generate exhaust gas. For each sample, four independent variables -- the mass of the sample, the flow rate of the exhaust gas, CO concentration in the exhaust gas and the combustion time of the sample -- were measured, and the CO generation rate was calculated. The generation rate of CO from the charcoal was shown to be 137-185 ml/min/kW. Theoretical ventilation requirements for charcoals to prevent CO poisoning are estimated to be 41.2-55.6 m(3)/h/kW. PMID:21372432

  1. Tubular bamboo charcoal for anode in microbial fuel cells

    NASA Astrophysics Data System (ADS)

    Zhang, Jun; Li, Jun; Ye, Dingding; Zhu, Xun; Liao, Qiang; Zhang, Biao

    2014-12-01

    The anode material plays a significant role in determining the performance of microbial fuel cells (MFCs). In this study, the bamboo charcoal tube is proposed as a novel anode substrate by carbonizing the natural bamboo. Its surface functional groups, biocompatibility and internal resistance are thoroughly investigated. Performance of the MFCs with a conventional graphite tube anode and a bamboo charcoal tube anode is also compared. The results indicate that the tubular bamboo charcoal anode exhibits advantages over the graphite tube anode in terms of rougher surface, superior biocompatibility and smaller total internal resistance. Moreover, the X-ray photoelectron spectroscopy (XPS) analysis for the bamboo charcoal reveals that the introduced C-N bonds facilitate the electron transfer between the biofilm and electrodes. As a result, the MFC with a bamboo charcoal tube anode achieves a 50% improvement in the maximum power density over the graphite tube case. Furthermore, scale-up of the bamboo charcoal tube anode is demonstrated by employing a bundle of tubular bamboo charcoal to reach higher power output.

  2. Activated soil filters for removal of biocides from contaminated run-off and waste-waters.

    PubMed

    Bester, Kai; Banzhaf, Stefan; Burkhardt, Michael; Janzen, Niklas; Niederstrasser, Bernd; Scheytt, Traugott

    2011-11-01

    Building facades can be equipped with biocides to prevent formation of algal, fungal and bacterial films. Thus run-off waters may contain these highly active compounds. In this study, the removal of several groups of biocides from contaminated waters by means of an activated soil filter was studied. A technical scale activated vertical soil filter (biofilter) with different layers (peat, sand and gravel), was planted with reed (Phragmites australis) and used to study the removal rates and fate of hydrophilic to moderate hydrophobic (log K(ow) 1.8-4.4) biocides and biocide metabolites such as: Terbutryn, Cybutryn (Irgarol® 1051), Descyclopropyl-Cybutryn (Cybutryn and Terbutryn metabolite), Isoproturon, Diuron, and its metabolite Diuron-desmonomethyl, Benzo-isothiazolinone, n-Octyl-isothiazolinone, Dichloro-n-octylisothiazolinone and Iodocarbamate (Iodocarb). Three experiments were performed: the first one (36 d) under low flow conditions (61 L m(-2) d(-1)) reached removal rates between 82% and 100%. The second one was performed to study high flow conditions: During this experiment, water was added as a pulse to the filter system with a hydraulic load of 255 L m(-2) within 5 min (retention time <1 h). During this experiment the removal rates of the compounds decreased drastically. For five compounds (Cybutryn, Descyclopropyl-Cybutryn, Diuron, Isoproturon, and Iodocarb) the removal dropped temporarily below 60%, while it was always above 70% for the others (Terbutryn, Benzo-isothiazolinone, n-Octyl-isothiazolinone, Dichloro-n-octylisothiazolinone). However, this removal is a considerable improvement compared to direct discharge into surface waters or infiltration into soil without appropriate removal. In the last experiment the removal efficiencies of the different layers were studied. Though the peat layer was responsible for most of the removal, the sand and gravel layers also contributed significantly for some compounds. All compounds are rather removed by

  3. Actin filament tracking based on particle filters and stretching open active contour models.

    PubMed

    Li, Hongsheng; Shen, Tian; Vavylonis, Dimitrios; Huang, Xiaolei

    2009-01-01

    We introduce a novel algorithm for actin filament tracking and elongation measurement. Particle Filters (PF) and Stretching Open Active Contours (SOAC) work cooperatively to simplify the modeling of PF in a one-dimensional state space while naturally integrating filament body constraints to tip estimation. Our algorithm reduces the PF state spaces to one-dimensional spaces by tracking filament bodies using SOAC and probabilistically estimating tip locations along the curve length of SOACs. Experimental evaluation on TIRFM image sequences with very low SNRs demonstrates the accuracy and robustness of this approach. PMID:20426170

  4. Suggested improvements to the standard filter paper assay used to measure cellulase activity.

    PubMed

    Coward-Kelly, Guillermo; Aiello-Mazzari, Cateryna; Kim, Sehoon; Granda, Cesar; Holtzapple, Mark

    2003-06-20

    Two suggestions can be found in the literature to improve the reproducibility of the Mandels' filter paper assay: add supplemental cellobiase and increase the boiling time for color development. Here we provide data that strongly supports adding supplemental cellobiase. Adding supplemental cellobiase increased assay response by 56%. Cellulases from different sources have different cellobiase activities, which would cause significant variation in the assay response. There is no need for additional boiling time-5 minutes is sufficient. For maximum reproducibility, it is essential that the water bath vigorously boil so that temperature excursions are minimized. PMID:12673775

  5. Effects of intermittent contaminant loading on the bed capacity of activated carbon filters

    SciTech Connect

    Hemenway, D.R.; Fitzgerald, B.J.; Paret, T.

    1982-09-01

    The effects of intermittent contaminant loading compared to constant contaminant loading on the bed capacity of an activated carbon filter under constant flow conditions were investigated. Two separate studies were conducted, one with benzene as the contaminant, the other utilizing carbon tetrachloride as the contaminant. A 16% reduction in effective bed capacity was observed for benzene and a 20% reduction occurred with carbon tetrachloride under equal loading and flushing intervals. It was found that a significant reduction in bed capacity under periodic loading - constant air flow conditions occurred when compared with constant loading - constant flow situations.

  6. Assessment of two-filter technique for correlating actinium-227 concentrations in soils

    SciTech Connect

    Fraizer, W.K.; Patch, K.D.; Reynolds, B.A.

    1980-02-01

    Concentrations of actinium-227 in soil samples from waste-disposal sites for uranium procession plants were successfully correlated with radon-219 measurements obtained by the two-filter technique, thus avoiding time-consuming and difficult radiochemical analyses. A flow-through sampling device and procedure were developed which determined actinium levels with a precision of 2 pCi/g +- 50%. Theoretical relations for the production of radon from actinium, the decay of radon, and the decay and diffusion of radon daughters in the two-filter apparatus were formulated. Measurements indicated that the emanation fraction for radon-219 was about 15%. Sampling filters collected radon daughters with a 93% efficiency while radon could be scrubbed from air samples by use of an activated-charcoal canister.

  7. Gastric decontamination performed 5 min after the ingestion of temazepam, verapamil and moclobemide: charcoal is superior to lavage

    PubMed Central

    Lapatto-reiniluoto, O; Kivistö, K T; Neuvonen, P J

    2000-01-01

    Aims The aim was to study the efficacy of gastric lavage and activated charcoal in preventing the absorption of temazepam, verapamil and moclobemide when gastric decontamination was performed immediately after ingestion of the drugs. Methods Nine healthy volunteers took part in a randomized cross-over study with three phases. The subjects were administered single oral doses of 10 mg temazepam, 80 mg verapamil and 150 mg moclobemide. Five minutes later, they were assigned to one of the following treatments: 200 ml water (control), 25 g activated charcoal as a suspension in 200 ml water or gastric lavage. Plasma concentrations and the cumulative excretion into urine of the three drugs were determined up to 24 h. Results The mean AUC(0,24 h) of temazepam, verapamil and moclobemide was reduced by 95.2% (P < 0.01), 92.8% (P < 0.01) and 99.7% (P < 0.01), respectively, by activated charcoal compared with control. Gastric lavage did not reduce significantly the AUC(0,24 h) of these drugs. The 24 h cumulative excretion of temazepam, verapamil and moclobemide into urine was reduced significantly (P < 0.05) by charcoal but not by gastric lavage. Charcoal reduced the AUC(0,24 h), Cmax and urinary excretion of all three drugs significantly more than lavage. Conclusions Activated charcoal is very effective and gastric lavage can be rather ineffective in preventing the absorption of temazepam, verapamil and moclobemide when the treatment is given very rapidly after ingestion of the drugs, before tablet disintegration has occurred. PMID:10718784

  8. Ancient charcoal as a natural archive for paleofire regime and vegetation change in the Mayumbe, Democratic Republic of the Congo

    NASA Astrophysics Data System (ADS)

    Hubau, Wannes; Van den Bulcke, Jan; Kitin, Peter; Mees, Florias; Baert, Geert; Verschuren, Dirk; Nsenga, Laurent; Van Acker, Joris; Beeckman, Hans

    2013-09-01

    Charcoal was sampled in four soil profiles at the Mayumbe forest boundary (DRC). Five fire events were recorded and 44 charcoal types were identified. One stratified profile yielded charcoal assemblages around 530 cal yr BP and > 43.5 cal ka BP in age. The oldest assemblage precedes the period of recorded anthropogenic burning, illustrating occasional long-term absence of fire but also natural wildfire occurrences within tropical rainforest. No other charcoal assemblages older than 2500 cal yr BP were recorded, perhaps due to bioturbation and colluvial reworking. The recorded paleofires were possibly associated with short-lived climate anomalies. Progressively dry climatic conditions since ca. 4000 cal yr BP onward did not promote paleofire occurrence until increasing seasonality affected vegetation at the end of the third millennium BP, as illustrated by a fire occurring in mature rainforest that persisted until around 2050 cal yr BP. During a drought episode coinciding with the 'Medieval Climate Anomaly', mature rainforest was locally replaced by woodland savanna. Charcoal remains from pioneer forest indicate that fire hampered forest regeneration after climatic drought episodes. The presence of pottery shards and oil-palm endocarps associated with two relatively recent paleofires suggests that the effects of climate variability were amplified by human activities.

  9. Ammonium removal of drinking water at low temperature by activated carbon filter biologically enhanced with heterotrophic nitrifying bacteria.

    PubMed

    Qin, Wen; Li, Wei-Guang; Zhang, Duo-Ying; Huang, Xiao-Fei; Song, Yang

    2016-03-01

    We sought to confirm whether use of Acinetobacter strains Y7 and Y16, both strains of heterotrophic nitrifying bacteria, was practical for removing ammonium (NH4 (+)-N) from drinking water at low temperatures. To test this, ammonium-containing drinking water was treated with strains Y7 and Y16 at 8 and 2 °C. Continuous ammonium treatment was conducted in order to evaluate the performance of three biologically enhanced activated carbon (BEAC) filters in removing ammonium. The three BEAC filters were inoculated with strain Y7, strain Y16, and a mixture of strains Y7 and Y16, respectively. A granular activated carbon (GAC) filter, without inoculation by any strains, was tested in parallel with the BEAC filters as control. The results indicated that NH4 (+)-N removal was significant when a BEAC filter was inoculated with the mixture of strains Y7 and Y16 (BEAC-III filter). Amounts of 0.44 ± 0.05 and 0.25 ± 0.05 mg L(-1) NH4 (+)-N were removed using the BEAC-III filter at 8 and 2 °C, respectively. These values were 2.8-4.0-fold higher than the values of ammonium removal acquired using the GAC filter. The synergistic effect of using strains Y7 and Y16 in concert was the cause of the high-ammonium removal efficiency achieved by using the BEAC-III filter at low temperatures. In addition, a high C/N ratio may promote NH4 (+)-N removal efficiency by improving biomass and microbial activity. This study provides new insight into the use of biofilters to achieve biological removal of ammonium at low temperature. PMID:26527340

  10. Reduction of the polycyclic aromatic hydrocarbon (PAH) content of charcoal smoke during grilling by charcoal preparation using high carbonisation and a preheating step.

    PubMed

    Chaemsai, Suriyapong; Kunanopparat, Thiranan; Srichumpuang, Jidapa; Nopharatana, Montira; Tangduangdee, Chairath; Siriwattanayotin, Suwit

    2016-01-01

    Charcoal-grilling may lead to contamination of food with carcinogenic polycyclic aromatic hydrocarbons (PAHs) during the grilling process. The objective of this work was to determine the effect of charcoal preparation on 16 USEPA priority PAHs in the smoke produced during the grilling process. Firstly, mangrove charcoal was prepared at carbonisation temperatures of 500, 750 and 1000 °C. The charcoal were then preheated by burning at 650 °C. This preheating step is usually used to prepare hot charcoal for the grilling process in the food industry. In this study, charcoal was preheated at different burning times at 5, 20 min and 5 h, at which time partial and whole charcoal glowed, and charcoal was completely burnt, respectively. Finally, PAHs in the smoke were collected and determined by GC/MS. The result showed that charcoal prepared at a carbonisation temperature of 500 °C had higher levels of PAHs released into the smoke. In contrast, charcoal produced at 750 and 1000 °C had lower PAHs released for all burning times. In addition, PAHs released for 5, 20 min and 5 h of burning time were about 19.9, 1.2 and 0.7 µg g(-1) dry charcoal for charcoal produced at 500 °C, and about 0.9-1.4, 0.8-1.2 and 0.15-0.3 µg g(-1) dry charcoal for charcoal produced at 750 and 1000 °C, respectively. Therefore, this research suggests that food grilled using charcoal carbonised at a high temperature of about 750 °C presents a lower risk of PAH contamination. In addition, in the preheating step, whole charcoal should fully glow in order to reduce the PAH content in charcoal before grilling. PMID:26785749

  11. Multiple hormonal activities of UV filters and comparison of in vivo and in vitro estrogenic activity of ethyl-4-aminobenzoate in fish.

    PubMed

    Kunz, Petra Y; Fent, Karl

    2006-10-12

    UV filters have been detected in surface water, wastewater and fish, and some of them are estrogenic in fish. At present, little is known about their additional hormonal activities in different hormonal receptor systems despite their increasing use and environmental persistence. Besides estrogenic activity, UV filters may have additional activities, both agonistic and antagonistic in aquatic organisms. In our study, we investigate a series of UV filters for multiple hormonal activities in vitro in human receptor systems and evaluate the predictive value of these findings for the activity in fish in vitro and in vivo. First we systematically analysed the estrogenic, antiestrogenic, androgenic, and antiandrogenic activity of 18 UV filters and one metabolite in vitro at non-cytotoxic concentrations with recombinant yeast systems carrying either a human estrogen (hERalpha) or androgen receptor (hAR). All 19 compounds elicited hormonal activities, surprisingly most of them multiple activities. We found 10 UV-filters having agonistic effects towards the hERalpha. Surprisingly, we identified for the first time six UV filters with androgenic activities and many of them having pronounced antiestrogenic and antiandrogenic activities. As much as 17 compounds inhibited 4,5-dihydrotestosterone activity in the hAR assay, while 14 compounds inhibited estradiol activity in the hERalpha assay, indicating antiandrogenic and antiestrogenic activity, respectively. In particular, the antiandrogenic activities of phenyl- and benzyl salicylate, benzophenone-1 and -2, and of 4-hydroxybenzophenone were higher than that of flutamide, a known hAR antagonist. In a second series of experiments, we investigated the predictive power of the hERalpha assay for aquatic organisms by further investigating the estrogenic UV filter ethyl 4-aminobenzoate (Et-PABA) in vitro and in vivo in fish. Et-PABA showed estrogenic activity in a recombinant yeast system carrying the rainbow trout estrogen receptor

  12. Predicting distributions of charcoal in Amazonian soils: approaches from earth and space

    NASA Astrophysics Data System (ADS)

    McMichael, C.; Palace, M. W.; Bush, M. B.; Braswell, R.; Hagen, S. C.; Czarnecki, C.; Neves, E.; Raczka, M.

    2011-12-01

    The direct linkage between fire and human activity in Amazonian rainforests is evidenced in both remote sensing datasets and field-based research. Paleoecological and archaeological data suggest the synergy has persisted millennia, and that human populations may have equaled modern numbers before European contact. Pre-Columbian people used fire to clear forests, but also combined charcoal with other materials to form Amazonian Black Earths (ABE), a nutrient rich anthrosol believed to be capable of sustaining large-scale permanent societies in such nutrient-poor tropical settings. The majority of impacted sites are found on bluffs overlooking Amazonian rivers, which are considered 'preferred' settings. Here, we examine predictions about preferred settings and the distributions of charcoal resulting from pre-Columbian human activity in western and central Amazonia using proxies from both earth and space. Soil sampling, stratified based on distance from river and forest seasonality, was used to determine whether preferred locations had higher probabilities of impacts. We analyzed more than 351 soil cores for ABE and macroscopic charcoal (> 500 μm) in the upper 20 cm of soil (representing modern fires), and in soils > 20 cm depth (representing historic fires). ABE was absent from all sites, but logistic regressions indicated that probabilities of finding soil charcoal significantly decreased as distance from river increased in aseasonal forests. However, in more seasonal forests, the probability of finding charcoal was increased, although distance from river was not a significant factor. Alternately, the location of ABE and charcoal mainly along major rivers may be an artifact of sampling. To look at distributions of ABE across broad spatial scales that may not be accessible from the ground, we used Hyperion satellite images to detect canopy chemistry differences resulting from various soil nutrients (i.e. soil enrichment occurring at ABE sites). Our initial findings

  13. High Efficiency Bi-Directional DC-DC Converter With ZVS-ZCS Applied For Parallel Active Filtering

    NASA Astrophysics Data System (ADS)

    Romero, V.; Soto, A.

    2011-10-01

    In space missions, it is becoming more and more common to have strict EMC requirements to be met. Coping with this is a challenge for all those instruments and subsystems implementing AC loads. In particular, the driving of motors is one of the highest challenges due to the low frequency and high amplitude of the emissions. The driving of these motors without exceeding typical EMC levels implies adding an active filter at its input. Passive filtering approach is not useful due to bulk components required to filter such low frequencies. The aim of this paper is to show a parallel active filtering solution that implements significant advantages compared to other classical approaches in terms of mass and efficiency.

  14. 24. Photocopy of photograph. VIEW OF CHARCOAL KILNS AND IRON ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    24. Photocopy of photograph. VIEW OF CHARCOAL KILNS AND IRON PLANT FROM SOUTH END OF BEACH, probably 1901. (From the Robert Teagle Private Collection, Port Townsend, WA) - Irondale Iron & Steel Plant, Port Townsend, Jefferson County, WA

  15. INTERIOR DETAIL, STOVE. SMALL CHARCOAL FIRES WERE LIT IN THE ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    INTERIOR DETAIL, STOVE. SMALL CHARCOAL FIRES WERE LIT IN THE DEPRESSIONS, WHICH WERE COVERED WITH IRON GRATES TO SUSPEND POTS OVER THE HEAT SOURCE - The Woodlands, 4000 Woodlands Avenue, Philadelphia, Philadelphia County, PA

  16. Formation of charcoal from biomass in a sealed reactor

    SciTech Connect

    Mok, W.S.L.; Antal, M.J. Jr. ); Szabo, P.; Varhegyi, G.; Zelei, B. )

    1992-04-01

    In this paper, samples o cellulose, hemicellulose, lignin, and nine species of whole biomass are pyrolyzed in sealed reactors. Very high charcoal yields (e.g., 40% from cellulose, 48% from Eucalyptus gummifera) were obtained. Higher sample loading (sample mass per unit reactor volume) increased charcoal yield and the associated exothermic heat release and lowered the reaction onset temperature. These effects were induced by the vapor-phase concentrations of the volatile products, and not the system pressure. Addition of water catalyzed the reaction and increased the char yield. These observations suggest that charcoal formation is autocatalyzed by water, an initial pyrolysis product. When whole biomass was used as a feedstock, higher charcoal yields were obtained from species with high lignin and/or low hemicellulose content.

  17. In situ activity recovery of aging biofilm in biological aerated filter: Surfactants treatment and mechanisms study.

    PubMed

    Yu, Qisheng; Huang, Hui; Ren, Hongqiang; Ding, Lili; Geng, Jinju

    2016-11-01

    In situ activity recovery of aging biofilm in the biological aerated filter (BAF) is an important but underappreciated problem. Lab-scaled BAFs were established in this study and three kinds of surfactants containing sodium dodecyl sulfate (SDS), sodium dodecyl benzene sulfonate (SDBS) and rhamnolipid were employed. Multiple indicators including effluent qualities, dissolved organic matters, biofilm physiology and morphology characteristics were investigated to explore the mechanisms. Results showed that removal rates of effluent COD in test groups significantly recovered to the level before aging. Compared with the control, effluent in SDBS and rhamnolipid-treated groups obtained more protein-like and humic-like substances, respectively. Furthermore, great live cell ratio, smooth surface and low adhesion force of biofilm were observed after rhamnolipid treatment, which was in consistent with good effluent qualities in the same group. This is the first report of applying rhamnolipid for in situ activity recovery of aging biofilm in bioreactors. PMID:27513646

  18. Collaborative Filtering for Brain-Computer Interaction Using Transfer Learning and Active Class Selection

    PubMed Central

    Wu, Dongrui; Lance, Brent J.; Parsons, Thomas D.

    2013-01-01

    Brain-computer interaction (BCI) and physiological computing are terms that refer to using processed neural or physiological signals to influence human interaction with computers, environment, and each other. A major challenge in developing these systems arises from the large individual differences typically seen in the neural/physiological responses. As a result, many researchers use individually-trained recognition algorithms to process this data. In order to minimize time, cost, and barriers to use, there is a need to minimize the amount of individual training data required, or equivalently, to increase the recognition accuracy without increasing the number of user-specific training samples. One promising method for achieving this is collaborative filtering, which combines training data from the individual subject with additional training data from other, similar subjects. This paper describes a successful application of a collaborative filtering approach intended for a BCI system. This approach is based on transfer learning (TL), active class selection (ACS), and a mean squared difference user-similarity heuristic. The resulting BCI system uses neural and physiological signals for automatic task difficulty recognition. TL improves the learning performance by combining a small number of user-specific training samples with a large number of auxiliary training samples from other similar subjects. ACS optimally selects the classes to generate user-specific training samples. Experimental results on 18 subjects, using both nearest neighbors and support vector machine classifiers, demonstrate that the proposed approach can significantly reduce the number of user-specific training data samples. This collaborative filtering approach will also be generalizable to handling individual differences in many other applications that involve human neural or physiological data, such as affective computing. PMID:23437188

  19. Collaborative filtering for brain-computer interaction using transfer learning and active class selection.

    PubMed

    Wu, Dongrui; Lance, Brent J; Parsons, Thomas D

    2013-01-01

    Brain-computer interaction (BCI) and physiological computing are terms that refer to using processed neural or physiological signals to influence human interaction with computers, environment, and each other. A major challenge in developing these systems arises from the large individual differences typically seen in the neural/physiological responses. As a result, many researchers use individually-trained recognition algorithms to process this data. In order to minimize time, cost, and barriers to use, there is a need to minimize the amount of individual training data required, or equivalently, to increase the recognition accuracy without increasing the number of user-specific training samples. One promising method for achieving this is collaborative filtering, which combines training data from the individual subject with additional training data from other, similar subjects. This paper describes a successful application of a collaborative filtering approach intended for a BCI system. This approach is based on transfer learning (TL), active class selection (ACS), and a mean squared difference user-similarity heuristic. The resulting BCI system uses neural and physiological signals for automatic task difficulty recognition. TL improves the learning performance by combining a small number of user-specific training samples with a large number of auxiliary training samples from other similar subjects. ACS optimally selects the classes to generate user-specific training samples. Experimental results on 18 subjects, using both k nearest neighbors and support vector machine classifiers, demonstrate that the proposed approach can significantly reduce the number of user-specific training data samples. This collaborative filtering approach will also be generalizable to handling individual differences in many other applications that involve human neural or physiological data, such as affective computing. PMID:23437188

  20. Chemical analysis and potential health risks of hookah charcoal.

    PubMed

    Elsayed, Yehya; Dalibalta, Sarah; Abu-Farha, Nedal

    2016-11-01

    Hookah (waterpipe) smoking is a very common practice that has spread globally. There is growing evidence on the hazardous consequences of smoking hookah, with studies indicating that its harmful effects are comparable to cigarette smoking if not worse. Charcoal is commonly used as a heating source for hookah smoke. Although charcoal briquettes are thought to be one of the major contributors to toxicity, their composition and impact on the smoke generated remains largely unidentified. This study aims to analyze the elemental composition of five different raw synthetic and natural charcoals by using Carbon-Hydrogen-Nitrogen (CHN) analysis, inductively coupled plasma (ICP), and scanning electron microscopy coupled with energy dispersive X-Ray spectrometry (SEM-EDS). Elemental analysis showed that the raw charcoals contain heavy metals such as zinc, iron, cadmium, vanadium, aluminum, lead, chromium, manganese and cobalt at concentrations similar, if not higher than, cigarettes. In addition, thermal desorption-gas chromatography-mass spectrometry (TD-GC-MS) was used to analyze the chemical composition of the smoke produced from burning the charcoal samples. The smoke emitted from charcoal was found to be the source of numerous compounds which could be hazardous to health. A total of seven carcinogens, 39 central nervous system depressants and 31 respiratory irritants were identified. PMID:27343945

  1. Charcoal versus LPG grilling: A carbon-footprint comparison

    SciTech Connect

    Johnson, Eric

    2009-11-15

    Undoubtedly, grilling is popular. Britons fire up their barbeques some 60 million times a year, consuming many thousands of tonnes of fuel. In milder climates consumption is even higher, and in the developing world, charcoal continues to be an essential cooking fuel. So it is worth comparing the carbon footprints of the two major grill types, charcoal and LPG, and that was the purpose of the study this paper documents. Charcoal and LPG grill systems were defined, and their carbon footprints were calculated for a base case and for some plausible variations to that base case. In the base case, the charcoal grilling footprint of 998 kg CO{sub 2}e is almost three times as large as that for LPG grilling, 349 kg CO{sub 2}e. The relationship is robust under all plausible sensitivities. The overwhelming factors are that as a fuel, LPG is dramatically more efficient than charcoal in its production and considerably more efficient in cooking. Secondary factors are: use of firelighters, which LPG does not need; LPG's use of a heavier, more complicated grill; and LPG's use of cylinders that charcoal does not need.

  2. Interaction mechanisms of organic contaminants with burned straw ash charcoal.

    PubMed

    Huang, Wenhai; Chen, Baoliang

    2010-01-01

    Black carbons (e.g., charcoal) have a great impact on the transport of organic contaminants in soil and water because of its strong affinity and ubiquity in the environment. To further elucidate their interaction mechanism, sorption of polar (p-nitrotoluene, m-dinitrobenzene and nitrobenzene) and nonpolar (naphthalene) aromatic contaminants to burned straw ash charcoal under different de-ashed treatments were investigated. The sorption isotherms fitted well with Freundlich equation, and the Freundlich N values were all around 0.31-0.38, being independent of the sorbate properties and sorbent types. After sequential removal of ashes by acid treatments (HCl and HCl-HF), both adsorption and partition were enhanced due to the enrichment of charcoal component. The separated contribution of adsorption and partition to total sorption were quantified. The effective carbon content in ash charcoal functioned as adsorption sites, partition phases, and hybrid regions with adsorption and partition were conceptualized and calculated. The hybrid regions increased obviously after de-ashed treatment. The linear relationships of Freundlich N values with the charring-temperature of charcoal or biochar (the charred byproduct in biomass pyrolysis) were observed based on the current study and the cited publications which included 15 different temperatures (100-850 degrees C), 10 kinds of precursors of charcoal/biochar, and 10 organic sorbates. PMID:21235190

  3. Charcoal agar, a new growth medium for the fish disease bacterium Renibacterium salmoninarum.

    PubMed Central

    Daly, J G; Stevenson, R M

    1985-01-01

    Charcoal is an effective replacement for serum in media for the isolation and culture of Renibacterium salmoninarum, the causative agent of bacterial kidney disease in salmonid fish. The medium, KDM-C, contains 10 g of peptone, 0.5 g of yeast extract, 1 g of L-cysteine hydrochloride, 1 g of activated charcoal, and 15 g of agar per liter and is adjusted to pH 6.8 with NaOH before autoclaving. Eight strains of R. salmoninarum grew from dilute inocula as well on KDM-C as on a standard serum-containing medium (KDM-2). The medium was effective for both primary isolations from fish and repeated transfers and has potential value for antigen preparation and physiological studies. Images PMID:4083882

  4. Autonomous navigation for autonomous underwater vehicles based on information filters and active sensing.

    PubMed

    He, Bo; Zhang, Hongjin; Li, Chao; Zhang, Shujing; Liang, Yan; Yan, Tianhong

    2011-01-01

    This paper addresses an autonomous navigation method for the autonomous underwater vehicle (AUV) C-Ranger applying information-filter-based simultaneous localization and mapping (SLAM), and its sea trial experiments in Tuandao Bay (Shangdong Province, P.R. China). Weak links in the information matrix in an extended information filter (EIF) can be pruned to achieve an efficient approach-sparse EIF algorithm (SEIF-SLAM). All the basic update formulae can be implemented in constant time irrespective of the size of the map; hence the computational complexity is significantly reduced. The mechanical scanning imaging sonar is chosen as the active sensing device for the underwater vehicle, and a compensation method based on feedback of the AUV pose is presented to overcome distortion of the acoustic images due to the vehicle motion. In order to verify the feasibility of the navigation methods proposed for the C-Ranger, a sea trial was conducted in Tuandao Bay. Experimental results and analysis show that the proposed navigation approach based on SEIF-SLAM improves the accuracy of the navigation compared with conventional method; moreover the algorithm has a low computational cost when compared with EKF-SLAM. PMID:22346682

  5. Autonomous Navigation for Autonomous Underwater Vehicles Based on Information Filters and Active Sensing

    PubMed Central

    He, Bo; Zhang, Hongjin; Li, Chao; Zhang, Shujing; Liang, Yan; Yan, Tianhong

    2011-01-01

    This paper addresses an autonomous navigation method for the autonomous underwater vehicle (AUV) C-Ranger applying information-filter-based simultaneous localization and mapping (SLAM), and its sea trial experiments in Tuandao Bay (Shangdong Province, P.R. China). Weak links in the information matrix in an extended information filter (EIF) can be pruned to achieve an efficient approach-sparse EIF algorithm (SEIF-SLAM). All the basic update formulae can be implemented in constant time irrespective of the size of the map; hence the computational complexity is significantly reduced. The mechanical scanning imaging sonar is chosen as the active sensing device for the underwater vehicle, and a compensation method based on feedback of the AUV pose is presented to overcome distortion of the acoustic images due to the vehicle motion. In order to verify the feasibility of the navigation methods proposed for the C-Ranger, a sea trial was conducted in Tuandao Bay. Experimental results and analysis show that the proposed navigation approach based on SEIF-SLAM improves the accuracy of the navigation compared with conventional method; moreover the algorithm has a low computational cost when compared with EKF-SLAM. PMID:22346682

  6. Benefit-cost analysis of commercially available activated carbon filters for indoor ozone removal in single-family homes.

    PubMed

    Aldred, J R; Darling, E; Morrison, G; Siegel, J; Corsi, R L

    2016-06-01

    This study involved the development of a model for evaluating the potential costs and benefits of ozone control by activated carbon filtration in single-family homes. The modeling effort included the prediction of indoor ozone with and without activated carbon filtration in the HVAC system. As one application, the model was used to predict benefit-to-cost ratios for single-family homes in 12 American cities in five different climate zones. Health benefits were evaluated using disability-adjusted life-years and included city-specific age demographics for each simulation. Costs of commercially available activated carbon filters included capital cost differences when compared to conventional HVAC filters of similar particle removal efficiency, energy penalties due to additional pressure drop, and regional utility rates. The average indoor ozone removal effectiveness ranged from 4 to 20% across the 12 target cities and was largely limited by HVAC system operation time. For the parameters selected in this study, the mean predicted benefit-to-cost ratios for 1-inch filters were >1.0 in 10 of the 12 cities. The benefits of residential activated carbon filters were greatest in cities with high seasonal ozone and HVAC usage, suggesting the importance of targeting such conditions for activated carbon filter applications. PMID:25952610

  7. Active slag filters: rapid assessment of phosphorus removal efficiency from effluent as a function of retention time.

    PubMed

    Shilton, Andy; Chen, Leon; Elemetri, Ibrahim; Pratt, Chris; Pratt, Steven

    2013-01-01

    There is increasing pressure to upgrade effluent ponds for phosphorus removal. Active slag filters offer a solution, but design information is limited. Hydraulic retention time (HRT) is a key factor in filter design because it controls filter treatment efficiency as well the filter substrate lifespan. This paper reports on a rapid method of continual looping of effluent through a filter column to obtain a relationship between HRT and phosphorus removal efficiency. Phosphorus removal declined logarithmically with respect to retention time. While the mechanisms that yield this relationship involve complex mass transfer and adsorption of phosphorus to Fe oxyhydroxide sites, in general terms, the adsorption rate is proportional to the adsorbate effluent concentration. Waste stabilization pond effluent treated by the slag achieved phosphorus removal efficiencies over 90% at extended HRTs greater than 70 hours, while 80% removal was obtainable in 30 hours. Higher phosphorus removal was achieved for slag treating real effluent compared with synthetic phosphate solution. This can be explained by: (1) different starting phosphorus concentrations in the synthetic phosphate solution and real effluent; and (2) the presence of constituents in real effluent that can enhance phosphorus removal, such as oxidized iron compounds, cations, algae and humic complexes. This new technique, which proved capable of replicating treatment efficiencies obtained from long-term column studies, offers rapid assessment of phosphorus removal efficiency as a function of retention time and thus will enable design engineers to size active filters on the basis of achieving the required phosphorus removal standards. PMID:23530330

  8. Use of charcoals and broiler litter biochar for removal of radioactive cesium (Cs-134 plus Cs-137) from contaminated water

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Various charcoals (used in food processing and water treatment) and broiler litter biochar were examined for ability to adsorb water-soluble low-level radioactive cesium (ca. 200-250 Bq/kg) extracted from contaminated wheat bran. Among the materials tested, steam activated broiler litter biochar was...

  9. Actin Filament Tracking Based on Particle Filters and Stretching Open Active Contour Models

    PubMed Central

    Li, Hongsheng; Shen, Tian; Vavylonis, Dimitrios; Huang, Xiaolei

    2010-01-01

    We introduce a novel algorithm for actin filament tracking and elongation measurement. Particle Filters (PF) and Stretching Open Active Contours (SOAC) work cooperatively to simplify the modeling of PF in a one-dimensional state space while naturally integrating filament body constraints to tip estimation. Existing microtubule (MT) tracking methods track either MT tips or entire bodies in high-dimensional state spaces. In contrast, our algorithm reduces the PF state spaces to one-dimensional spaces by tracking filament bodies using SOAC and probabilistically estimating tip locations along the curve length of SOACs. Experimental evaluation on TIRFM image sequences with very low SNRs demonstrates the accuracy and robustness of the proposed approach. PMID:20426170

  10. Adaptive Fuzzy Hysteresis Band Current Controller for Four-Wire Shunt Active Filter

    NASA Astrophysics Data System (ADS)

    Hamoudi, F.; Chaghi, A.; Amimeur, H.; Merabet, E.

    2008-06-01

    This paper presents an adaptive fuzzy hysteresis band current controller for four-wire shunt active power filters to eliminate harmonics and to compensate reactive power in distribution systems in order to keep currents at the point of common coupling sinusoidal and in phase with the corresponding voltage and the cancel neutral current. The conventional hysteresis band known for its robustness and its advantage in current controlled applications is adapted with a fuzzy logic controller to change the bandwidth according to the operating point in order to keep the frequency modulation at tolerable limits. The algorithm used to identify the reference currents is based on the synchronous reference frame theory (dqγ). Finally, simulation results using Matlab/Simulink are given to validate the proposed control.

  11. Fast Power Line Detection and Localization Using Steerable Filter for Active Uav Guidance

    NASA Astrophysics Data System (ADS)

    Liu, Y.; Mejias, L.; Li, Z.

    2012-08-01

    In this paper we present a fast power line detection and localisation algorithm as well as propose a high-level guidance architecture for active vision-based Unmanned Aerial Vehicle (UAV) guidance. The detection stage is based on steerable filters for edge ridge detection, followed by a line fitting algorithm to refine candidate power lines in images. The guidance architecture assumes an UAV with an onboard Gimbal camera. We first control the position of the Gimbal such that the power line is in the field of view of the camera. Then its pose is used to generate the appropriate control commands such that the aircraft moves and flies above the lines. We present initial experimental results for the detection stage which shows that the proposed algorithm outperforms two state-of-the-art line detection algorithms for power line detection from aerial imagery.

  12. Changes of the porous structure of activated carbons applied in a filter bed pilot operation.

    PubMed

    Gauden, P A; Szmechtig-Gauden, E; Rychlicki, G; Duber, S; Garbacz, J K; Buczkowski, R

    2006-03-15

    The paper investigates the changes in porosity (i.e., in the accessible adsorption capacity of carbonaceous adsorbents for pollutants during filter bed maturation) of three activated carbons applied in a filter bed pilot operation. The results of this investigation may help to reduce operating costs, increase granular activated carbon bed life, maximize the useful life of biofilters, and understand the mechanism of water purification by carbon adsorbents. The analysis of the pore structure was limited to the first year of service of the beds, since this was when the largest decrease in the available pore capacity occurred. Low-temperature nitrogen adsorption isotherms were used to evaluate the structural parameters and pore size distributions (PSDs) of carbon samples (virgin (reference) and mature adsorbents for different periods of water treatment) on the basis of the Nguyen and Do (ND) method and density functional theory (DFT). These results were compared with small-angle X-ray scattering (SAXS) investigations (PSDs calculated by Glatter's indirect transformation method (ITP)). The results show that in general, the ND and ITP methods lead to almost the same qualitative distribution curve behavior. Moreover, the enthalpy of immersion in water, mercury porosimetry, densities (true and apparent), and the analysis of ash are reported and compared to explain the decrease in adsorptive capacity of the carbons investigated. On the other hand, the efficacy of TOC (total organic carbon, i.e., a quantity describing the complex matrix of organic material present in natural waters) removal and the bacteria count were analyzed to explain the role of adsorption in the elimination of contaminants from water. Finally, a mechanism of organic matter removal was suggested on the basis of the above-mentioned experimental data and compared with mechanisms reported by other authors. PMID:16198363

  13. Suppression of charcoal rot in soybean by moderately halotolerant Pseudomonas aeruginosa GS-33 under saline conditions.

    PubMed

    Patil, Sandeep; Paradeshi, Jayasinh; Chaudhari, Bhushan

    2016-08-01

    Charcoal rot severely limits the soybean crop yield under saline conditions. The present studies focus on biocontrol and plant growth promoting potential of phenazine producing moderately halotolerant Pseudomonas aeruginosa (GS-33) in soybean under saline soil conditions. A marine isolate; GS-33 was identified as P. aeruginosa based on polyphasic characterization. This strain showed potent in vitro biocontrol activity against charcoal rot causing fungus Macrophomina phaseolina. It was capable of producing phenazine-1-carboxylic acid even at elevated salt concentrations. Moreover, GS-33 possessed other biocontrol traits like production of siderophores, HCN and protease under saline conditions. Multiple traits for plant growth promotion such as synthesis of IAA, NH3 , and solubilization of phosphate were also exhibited by GS-33. Plant growth promoting and biocontrol control potentials of GS-33 were evaluated by pot assay under saline soil conditions. Higher biomass and chlorophyll content were observed in GS-33 treated seedlings. A greater reduction in charcoal rot caused by fungal pathogens under both normal and saline soil conditions in GS-33 treated seedlings was observed. In a nut shell, phenazine producing halotolerant strain GS-33 could mitigate saline soil conditions (abiotic stress) and infestation of M. phaseolina (biotic stress) in soybean. PMID:27213894

  14. Operationalizing measurement of forest degradation: Identification and quantification of charcoal production in tropical dry forests using very high resolution satellite imagery

    NASA Astrophysics Data System (ADS)

    Dons, K.; Smith-Hall, C.; Meilby, H.; Fensholt, R.

    2015-07-01

    Quantification of forest degradation in monitoring and reporting as well as in historic baselines is among the most challenging tasks in national REDD+ strategies. However, a recently introduced option is to base monitoring systems on subnational conditions such as prevalent degradation activities. In Tanzania, charcoal production is considered a major cause of forest degradation, but is challenging to quantify due to sub-canopy biomass loss, remote production sites and illegal trade. We studied two charcoal production sites in dry Miombo woodland representing open woodland conditions near human settlements and remote forest with nearly closed canopies. Supervised classification and adaptive thresholding were applied on a pansharpened QuickBird (QB) image to detect kiln burn marks (KBMs). Supervised classification showed reasonable detection accuracy in the remote forest site only, while adaptive thresholding was found acceptable at both locations. We used supervised classification and manual digitizing for KBM delineation and found acceptable delineation accuracy at both sites with RMSEs of 25-32% compared to ground measurements. Regression of charcoal production on KBM area delineated from QB resulted in R2s of 0.86-0.88 with cross-validation RMSE ranging from 2.22 to 2.29 Mg charcoal per kiln. This study demonstrates, how locally calibrated remote sensing techniques may be used to identify and delineate charcoal production sites for estimation of charcoal production and associated extraction of woody biomass.

  15. Development of Shunt-Type Three-Phase Active Power Filter with Novel Adaptive Control for Wind Generators

    PubMed Central

    Chen, Ming-Hung

    2015-01-01

    This paper proposes a new adaptive filter for wind generators that combines instantaneous reactive power compensation technology and current prediction controller, and therefore this system is characterized by low harmonic distortion, high power factor, and small DC-link voltage variations during load disturbances. The performance of the system was first simulated using MATLAB/Simulink, and the possibility of an adaptive digital low-pass filter eliminating current harmonics was confirmed in steady and transient states. Subsequently, a digital signal processor was used to implement an active power filter. The experimental results indicate, that for the rated operation of 2 kVA, the system has a total harmonic distortion of current less than 5.0% and a power factor of 1.0 on the utility side. Thus, the transient performance of the adaptive filter is superior to the traditional digital low-pass filter and is more economical because of its short computation time compared with other types of adaptive filters. PMID:26451391

  16. Development of Shunt-Type Three-Phase Active Power Filter with Novel Adaptive Control for Wind Generators.

    PubMed

    Chen, Ming-Hung

    2015-01-01

    This paper proposes a new adaptive filter for wind generators that combines instantaneous reactive power compensation technology and current prediction controller, and therefore this system is characterized by low harmonic distortion, high power factor, and small DC-link voltage variations during load disturbances. The performance of the system was first simulated using MATLAB/Simulink, and the possibility of an adaptive digital low-pass filter eliminating current harmonics was confirmed in steady and transient states. Subsequently, a digital signal processor was used to implement an active power filter. The experimental results indicate, that for the rated operation of 2 kVA, the system has a total harmonic distortion of current less than 5.0% and a power factor of 1.0 on the utility side. Thus, the transient performance of the adaptive filter is superior to the traditional digital low-pass filter and is more economical because of its short computation time compared with other types of adaptive filters. PMID:26451391

  17. Performance comparison of experimental constructed wetlands with different filter media and macrophytes treating industrial wastewater contaminated with lead and copper.

    PubMed

    Scholz, Miklas; Xu, Jing

    2002-06-01

    The aim of this study was to investigate the treatment efficiency of passive vertical-flow wetland filters containing different macrophytes (Phragmites and/or Typha) and granular media with different adsorption capacities. Gravel, sand, granular activated carbon, charcoal and Filtralite (light expanded clay) were used as filter media. Different concentrations of lead and copper sulfate were added to polluted urban stream inflow water to simulate pretreated mine wastewater. The relationships between growth media, microbial and plant communities as well as the reduction of predominantly lead, copper and five-day biochemical oxygen demand (BOD5) were investigated. An analysis of variance showed that concentration reductions (mg l(-1)) of lead, copper and BOD5 were significantly similar for the six experimental wetlands. Microbial diversity was low due to metal pollution and similar for all filters. There appears to be no additional benefit in using adsorption media and macrophytes to enhance biomass performance during the first 10 months of operation. PMID:12056494

  18. RF Magnetic Shielding Effects of a Bincho-Charcoal Plate

    NASA Astrophysics Data System (ADS)

    Itoh, Keisuke; Itoh, Mineo

    Recently, there has been increased interest for electromagnetic shielding in the radio frequency (RF) region. The use of effective electromagnetic shields has, moreover, been required to improve the electromagnetic environment. The present paper has applied bincho-charcoal, a high quality charcoal found in Japan, to improve RF electromagnetic shields. Bincho-charcoal makes an excellent shield, due to a very large value of relative permittivity in the RF region. In the present research, the evaluation of the RF magnetic shielding degree SDH of the bincho-charcoal was limited to a plate being exposed to an electromagnetic wave. The SDH of the single plate was found to increase with an increase in RF frequency over the range from 1 MHz to 1 GHz. The value of SDH at 100 MHz was found to be about 15 dB. The present authors have, furthermore, improved the value of SDH by the use of a triple plate, constructed from three bincho-charcoal plates. The SDH of the triple plate at 100 MHz was found to be improved by about 15 dB over that of the single plate. In addition, the SDH was shown to be improved by the superposition of a copper plate over the triple plate.

  19. Removal of microcystin-LR from spiked water using either activated carbon or anthracite as filter material.

    PubMed

    Drogui, Patrick; Daghrir, Rimeh; Simard, Marie-Christine; Sauvageau, Christine; Blais, Jean François

    2012-01-01

    The occurrence of cyanobacterial toxins (blue-green algae) in drinking water sources is a big concern for human health. Removal of microcystin-LR (MC-LR) from drinking water was evaluated at the laboratory pilot scale using either granular activated carbon (GAC) or powdered activated carbon (PAC) and compared with the treatment using anthracite as filter material. Virgin GAC was more effective at removing MC-LR (initial concentration ranging from 9 to 47 microg L(-1)) to reach the World Health Organization recommended level (1.0 microg L(-1)). When the GAC filter was colonized by bacteria, the filter became less effective at removing MC-LR owing to competitive reactions occurring between protein adsorption (released by bacteria) and MC-LR adsorption. Using PAC, the concentration of MC-LR decreased from 22 to 3 microg L(-1) (removal of 86% of MC-LR) by the addition of 100 mg PAC L(-1). PMID:22629609

  20. Clusterless Decoding of Position From Multiunit Activity Using A Marked Point Process Filter

    PubMed Central

    Deng, Xinyi; Liu, Daniel F.; Kay, Kenneth; Frank, Loren M.; Eden, Uri T.

    2016-01-01

    Point process filters have been applied successfully to decode neural signals and track neural dynamics. Traditionally, these methods assume that multiunit spiking activity has already been correctly spike-sorted. As a result, these methods are not appropriate for situations where sorting cannot be performed with high precision such as real-time decoding for brain-computer interfaces. As the unsupervised spike-sorting problem remains unsolved, we took an alternative approach that takes advantage of recent insights about clusterless decoding. Here we present a new point process decoding algorithm that does not require multiunit signals to be sorted into individual units. We use the theory of marked point processes to construct a function that characterizes the relationship between a covariate of interest (in this case, the location of a rat on a track) and features of the spike waveforms. In our example, we use tetrode recordings, and the marks represent a four-dimensional vector of the maximum amplitudes of the spike waveform on each of the four electrodes. In general, the marks may represent any features of the spike waveform. We then use Bayes’ rule to estimate spatial location from hippocampal neural activity. We validate our approach with a simulation study and with experimental data recorded in the hippocampus of a rat moving through a linear environment. Our decoding algorithm accurately reconstructs the rat’s position from unsorted multiunit spiking activity. We then compare the quality of our decoding algorithm to that of a traditional spike-sorting and decoding algorithm. Our analyses show that the proposed decoding algorithm performs equivalently or better than algorithms based on sorted single-unit activity. These results provide a path toward accurate real-time decoding of spiking patterns that could be used to carry out content-specific manipulations of population activity in hippocampus or elsewhere in the brain. PMID:25973549

  1. Measurement of filter paper activities of cellulase with microplate-based assay

    PubMed Central

    Yu, Xiaoxiao; Liu, Yan; Cui, Yuxiao; Cheng, Qiyue; Zhang, Zaixiao; Lu, Jia Hui; Meng, Qingfan; Teng, Lirong; Ren, Xiaodong

    2015-01-01

    It is always a challenge to determine the total cellulase activity efficiently without reducing accuracy. The most common total cellulase activity assay is the filter paper assay (FPA) established by the International Union of Pure and Applied Chemistry (IUPAC). A new procedure to measure the FPA with microplate-based assay was studied in this work, which followed the main idea of IUPAC to dilute cellulase preparation to get fixed glucose release. FPAs of six cellulase preparations were determined with the microplate-based assay. It is shown that FPAs of cellulase Youtell, RCconc, R-10, Lerkam, Yishui and Sinopharm were 67.9, 46.0, 46.1, 27.4, 7.6 and 8.0 IU/ml respectively. There was no significant difference at the 95% confidence level between the FPA determined with IUPAC and the microplate-based assay. It could be concluded that the FPA could be determined by the microplate-based assay with the same accuracy and much more efficiency compared with that by IUPAC. PMID:26858572

  2. Measurement of filter paper activities of cellulase with microplate-based assay.

    PubMed

    Yu, Xiaoxiao; Liu, Yan; Cui, Yuxiao; Cheng, Qiyue; Zhang, Zaixiao; Lu, Jia Hui; Meng, Qingfan; Teng, Lirong; Ren, Xiaodong

    2016-01-01

    It is always a challenge to determine the total cellulase activity efficiently without reducing accuracy. The most common total cellulase activity assay is the filter paper assay (FPA) established by the International Union of Pure and Applied Chemistry (IUPAC). A new procedure to measure the FPA with microplate-based assay was studied in this work, which followed the main idea of IUPAC to dilute cellulase preparation to get fixed glucose release. FPAs of six cellulase preparations were determined with the microplate-based assay. It is shown that FPAs of cellulase Youtell, RCconc, R-10, Lerkam, Yishui and Sinopharm were 67.9, 46.0, 46.1, 27.4, 7.6 and 8.0 IU/ml respectively. There was no significant difference at the 95% confidence level between the FPA determined with IUPAC and the microplate-based assay. It could be concluded that the FPA could be determined by the microplate-based assay with the same accuracy and much more efficiency compared with that by IUPAC. PMID:26858572

  3. BBQ charcoal as an important source of mercury emission.

    PubMed

    Pandey, Sudhir Kumar; Kim, Ki-Hyun; Kang, Chang-Hee; Jung, Myung Chae; Yoon, H

    2009-02-15

    In this study, the environmental significance of mercury emission has been investigated with respect to the use of the barbecue (BBQ) charcoal. For this purpose, emission gas samples collected from a total of 11 barbecue charcoal products commonly available in the Korean market were analyzed. All of these products consist of both domestic (4 types) and imported products (7 types from three countries). The emission concentration of Hg varied widely from sample to sample ranging from 114 to 496ngm(-3). The amount of Hg emission appeared to be affected by the diverse nature of raw materials and/or the processes involved in their production. In light of the recent reference exposure limits (REL) of Hg, it can be a potential threat to human health. As such, a proper regulation is desirable from a toxicological viewpoint to reduce the potential risk associated with the use of BBQ charcoal. PMID:18571317

  4. Visualizing the Perception Filter and Breaching It with Active-Learning Strategies

    ERIC Educational Resources Information Center

    White, Harold B.

    2012-01-01

    Teachers' perception filter operates in all realms of their consciousness. It plays an important part in what and how students learn and should play a central role in what and how they teach. This may be obvious, but having a visual model of a perception filter can guide the way they think about education. In this article, the author talks about…

  5. NEUTRON ACTIVATION ANALYSIS FOR SIMULTANEOUS DETERMINATION OF TRACE ELEMENTS IN AMBIENT AIR COLLECTED ON GLASS-FIBER FILTERS

    EPA Science Inventory

    Arsenic with 25 other elements are simultaneously determined in ambient air samples collected on glass-fiber filter composites at 250 United States sites. The instrumental neutron activation analysis (NAA) technique combined with the power of a dedicated mini-computer resulted in...

  6. Evaluation of charcoal sorbents for helium cryopumping in fusion reactors

    SciTech Connect

    Tobin, A.G.; Sedgley, D.W.; Batzer, T.H.; Call, W.R.

    1987-01-01

    Improved methods for cryopumping helium were developed for application to fusion reactors where high helium generation rates are expected. In this study, small coconut charcoal granules were utilized as the sorbent, and braze alloys and low temperature curing cements were used as the bonding agents for attachment to a copper support structure. Problems of scale-up of the bonding agent to a 40 cm diam panel were also investigated. Our results indicate that acceptable helium pumping performance of braze bonded and cement bonded charcoals can be achieved over the range of operating conditions expected in fusion reactors.

  7. Can Charcoal Provide Information About Fire Effects and Fire Severity?

    NASA Astrophysics Data System (ADS)

    Belcher, Claire; Hudpsith, Victoria; Doerr, Stefan; Santin, Cristina

    2016-04-01

    Building an understanding of the impact of a wildfire is critical to the management of ecosystems. Aspects of fire severity such as the amount of soil heating, can relate to post-fire ecosystem recovery. Yet, there is no quantitative measure of this in current post-burn fire severity assessments, which are mostly qualitative ground-based visual assessments of organic matter loss, and as such can be subjective and variable between ecosystems. In order to develop a unifying fire severity assessment we explore the use of charcoal produced during a wildfire, as a tool. Charcoal has been suggested to retain some information about the nature of the fire in which it was created and one such physical property of charcoal that can be measured post-fire is its ability to reflect light when studied under oil using reflectance microscopy. The amount of light reflected varies between charcoals and is thought to be explained by the differential ordering of graphite-like phases within the char however, to what aspects of a fire's nature this alteration pertains is unknown. We have explored the formation of charcoal reflectance in 1) laboratory-based experiments using an iCone calorimeter and in 2) experimental forest scale and natural wildland fires occurring in Canada in spring 2015. In our laboratory experiments we assessed the formation and evolution of charcoal reflectance during pre-ignition heating, peak fire intensity through to the end of flaming and the transition to oxidative/smoldering heating regimes. In the prescribed and natural wildland fires we positioned the same woods used in our laboratory experiments, rigged with thermocouples in the path of oncoming fires in order to assess the resulting charcoal reflectance in response to the heating regime imposed by the fire on the samples. In this presentation we will outline our approach, findings and discuss the potential for charcoal reflectance to provide a tool in post-fire assessments seeking to determine levels of

  8. Charcoal's physical properties are key to understanding its environmental behavior

    NASA Astrophysics Data System (ADS)

    Masiello, Caroline; Brewer, Catherine; Dugan, Brandon; Liu, Zuolin; Gonnermann, Helge; Zygourakis, Kyriacos; Davies, Christian; Panzacchi, Pietro; Gao, Xiaodong; Pyle, Lacey

    2014-05-01

    Charcoal is a highly porous, low density material whose physical properties play a key role in its soil behavior and its environmental fate. In considering biochar, some of its most sought-after environmental effects are a result of its physical characteristics, not its chemical or biological properties. For example, the ability of biochar to retain soil water is widely attributed to its porosity. However, charcoal physical properties are so poorly understood that they are sometimes not characterized at all in the current literature. Here we outline a suite of basic physical properties of charcoal and the likely environmental effects of their variations, with a focus on the interactions between charcoal and water. The most basic physical property of charcoal, its particle size, likely plays a role in its ability to alter the rate of drainage in soils. Particle morphology is also relevant, affecting how particles of soil and char can pack together. Bulk densities of charcoal and soil mixtures can be used to generate a simple estimate of the efficiency of char-soil packing. Charcoal density is an additionally important property and can be measured in a number of ways. Density almost certainly controls the tendency of chars to sink or float, and to erode or remain on the land surface. However, charcoal density can vary by almost a factor of 10 depending on the measurement technique used. We discuss two simple techniques available for measuring char density and the value of information provided by each approach. Finally, we report a simple, fast technique to measure total char porosity, including all pores from nanometers to 10s of micrometers in size. Porosity is at least one of the key controls on the ability of biochar to improve plant-available water, and techniques to measure it have previously been limited to the smallest fraction of pores (N2 sorption) or have required expensive, hazardous procedures (Hg porosimetry). We show that char porosity varies primarily

  9. Assessment of multiple hormone activities of a UV-filter (octocrylene) in zebrafish (Danio rerio).

    PubMed

    Zhang, Qiuya Y; Ma, Xiaoyan Y; Wang, Xiaochang C; Ngo, Huu Hao

    2016-09-01

    In this study, zebrafish (Danio rerio) were exposed to a UV-filter-octocrylene (OCT) with elevated concentrations for 28 d. The total body accumulation of OCT in zebrafish was found to reach 2321.01 ("L" level), 31,234.80 ("M" level), and 70,593.38 ng g(-1) ("H" level) when the average OCT exposure concentration was controlled at 28.61, 505.62, and 1248.70 μg L(-1), respectively. Gross and histological observations as well as RT-qPCR analysis were conducted to determine the effects of OCT accumulation on zebrafish. After exposure, the gonad-somatic index and percentage of vitellogenic oocytes were found to increase significantly in the ovaries of female zebrafish at the H accumulation level. Significant up-regulation of esr1 and cyp19b were observed in the gonads, as well as vtg1 in the livers for both female and male zebrafish. At M and H accumulation levels, apparent down-regulation of ar was observed in the ovaries and testis of the female and male zebrafish, respectively. Although the extent of the effects on zebrafish differed at different accumulation levels, the induction of vtg1 and histological changes in the ovaries are indications of estrogenic activity and the inhibition of esr1 and ar showed antiestrogenic and antiandrogenic activity, respectively. Thus, as OCT could easily accumulate in aquatic life such as zebrafish, one of its most of concern hazards would be the disturbance of the histological development and its multiple hormonal activities. PMID:27337435

  10. Nitrogen Removal in a Full-Scale Domestic Wastewater Treatment Plant with Activated Sludge and Trickling Filter

    PubMed Central

    Nourmohammadi, Davood; Esmaeeli, Mir-Bager; Akbarian, Hossein; Ghasemian, Mohammad

    2013-01-01

    During the last decade, more stringent effluent requirements concerning the nutrients effluent values have been imposed by legislation and social concern. In this study, efficiency of total nitrogen removal in activated sludge and trickling filter processes (AS/TF) was investigated in Tehran North wastewater treatment plant. Biological system in this site was included, anoxic selector tank, aeration tank, final sedimentation, and trickling filter. A part of treated wastewater before chlorination was mixed with supernatant of dewatered sludge and fed to the trickling filter. Supernatant of dewatered sludge with high concentration of NH4-N was diluted by treated wastewater to provide complete nitrification in trickling filter Produced nitrate in trickling filter was arrived to the anoxic tank and converted to nitrogen gas by denitrification. According to the study result, low concentration of organic carbone and high concentration of NH4-N led to nitrification in TF, then nitrate denitrification to nitrogen gas occurred in selector area. NH4-N concentration decreased from 26.8 mg/L to 0.29 mg/L in TF, and NO3-N concentration increased from 8.8 mg/L to 27 mg/L in TF. Consequently, the total nitrogen decreased approximately to 50% in biological process. This efficiency has been observed in returned flow around 24% from final sedimentation into TF. It was concluded that, in comparison with biological nutrient removal processes, this process is very efficient and simple. PMID:23710197

  11. Nitrogen removal in a full-scale domestic wastewater treatment plant with activated sludge and trickling filter.

    PubMed

    Nourmohammadi, Davood; Esmaeeli, Mir-Bager; Akbarian, Hossein; Ghasemian, Mohammad

    2013-01-01

    During the last decade, more stringent effluent requirements concerning the nutrients effluent values have been imposed by legislation and social concern. In this study, efficiency of total nitrogen removal in activated sludge and trickling filter processes (AS/TF) was investigated in Tehran North wastewater treatment plant. Biological system in this site was included, anoxic selector tank, aeration tank, final sedimentation, and trickling filter. A part of treated wastewater before chlorination was mixed with supernatant of dewatered sludge and fed to the trickling filter. Supernatant of dewatered sludge with high concentration of NH4-N was diluted by treated wastewater to provide complete nitrification in trickling filter Produced nitrate in trickling filter was arrived to the anoxic tank and converted to nitrogen gas by denitrification. According to the study result, low concentration of organic carbone and high concentration of NH4-N led to nitrification in TF, then nitrate denitrification to nitrogen gas occurred in selector area. NH4-N concentration decreased from 26.8 mg/L to 0.29 mg/L in TF, and NO3-N concentration increased from 8.8 mg/L to 27 mg/L in TF. Consequently, the total nitrogen decreased approximately to 50% in biological process. This efficiency has been observed in returned flow around 24% from final sedimentation into TF. It was concluded that, in comparison with biological nutrient removal processes, this process is very efficient and simple. PMID:23710197

  12. Determination Method for Optimal Installation of Active Filters in Distribution Network with Distributed Generation

    NASA Astrophysics Data System (ADS)

    Kawasaki, Shoji; Hayashi, Yasuhiro; Matsuki, Junya; Kikuya, Hirotaka; Hojo, Masahide

    Recently, the harmonic troubles in a distribution network are worried in the background of the increase of the connection of distributed generation (DG) and the spread of the power electronics equipments. As one of the strategies, control the harmonic voltage by installing an active filter (AF) has been researched. In this paper, the authors propose a computation method to determine the optimal allocations, gains and installation number of AFs so as to minimize the maximum value of voltage total harmonic distortion (THD) for a distribution network with DGs. The developed method is based on particle swarm optimization (PSO) which is one of the nonlinear optimization methods. Especially, in this paper, the case where the harmonic voltage or the harmonic current in a distribution network is assumed by connecting many DGs through the inverters, and the authors propose a determination method of the optimal allocation and gain of AF that has the harmonic restrictive effect in the whole distribution network. Moreover, the authors propose also about a determination method of the necessary minimum installation number of AFs, by taking into consideration also about the case where the target value of harmonic suppression cannot be reached, by one set only of AF. In order to verify the validity and effectiveness of the proposed method, the numerical simulations are carried out by using an analytical model of distribution network with DGs.

  13. EMISSIONS OF AIR TOXICS FROM A SIMULATED CHARCOAL KILN EQUIPPED WITH AN AFTERBURNER

    EPA Science Inventory

    A laboratory-scale simulator was constructed and tested to determine if it could be used to produce charcoal that was similar to the charcoal that is produced in Missouri-type charcoal kilns. An afterburner was added later to study conditions for oxidizing the volatile organic co...

  14. EMISSIONS OF AIR TOXICS FROM A SIMULATED CHARCOAL KILN EQUIPPED WITH AN AFTERBURNER (PROJECT SUMMARY)

    EPA Science Inventory

    A laboratory-scale charcoal kiln simu-lator was constructed and tested to de-termine if it could be used to produce charcoal that was similar to that pro-duced in Missouri-type charcoal kilns. An afterburner was added later to study conditions for oxidizing the volatile or-ganic ...

  15. EMISSIONS OF AIR TOXICS FROM A SIMULATED CHARCOAL KILN EQUIPPED WITH AN AFTERBURNER

    EPA Science Inventory

    The report discusses emissions of air toxics from a simulated charcoal kiln equipped with an afterburner. A laboratory-scale simulator was constructed and tested to determine if it could be used to produce charcoal that was similar to that produced in Missouri-type charcoal kilns...

  16. 40 CFR 454.10 - Applicability; description of the manufacture of char and charcoal briquets subcategory.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... manufacture of char and charcoal briquets subcategory. 454.10 Section 454.10 Protection of Environment... MANUFACTURING POINT SOURCE CATEGORY Char and Charcoal Briquets Subcategory § 454.10 Applicability; description of the manufacture of char and charcoal briquets subcategory. The provisions of this subpart...

  17. 40 CFR 454.10 - Applicability; description of the manufacture of char and charcoal briquets subcategory.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... manufacture of char and charcoal briquets subcategory. 454.10 Section 454.10 Protection of Environment... MANUFACTURING POINT SOURCE CATEGORY Char and Charcoal Briquets Subcategory § 454.10 Applicability; description of the manufacture of char and charcoal briquets subcategory. The provisions of this subpart...

  18. URINARY BIOMARKERS IN CHARCOAL WORKERS EXPOSED TO WOOD SMOKE IN BAHIA STATE, BRAZIL

    EPA Science Inventory

    Charcoal is an important source of energy for domestic and industrial use in many countries. In Brazil, the largest producer of charcoal in the world, approximately 350,000 workers are linked to the production and transportation of charcoal. In order to evaluate the occupationa...

  19. 40 CFR 454.10 - Applicability; description of the manufacture of char and charcoal briquets subcategory.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... manufacture of char and charcoal briquets subcategory. 454.10 Section 454.10 Protection of Environment... MANUFACTURING POINT SOURCE CATEGORY Char and Charcoal Briquets Subcategory § 454.10 Applicability; description of the manufacture of char and charcoal briquets subcategory. The provisions of this subpart...

  20. 40 CFR 454.10 - Applicability; description of the manufacture of char and charcoal briquets subcategory.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... manufacture of char and charcoal briquets subcategory. 454.10 Section 454.10 Protection of Environment... MANUFACTURING POINT SOURCE CATEGORY Char and Charcoal Briquets Subcategory § 454.10 Applicability; description of the manufacture of char and charcoal briquets subcategory. The provisions of this subpart...

  1. 40 CFR 454.10 - Applicability; description of the manufacture of char and charcoal briquets subcategory.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... manufacture of char and charcoal briquets subcategory. 454.10 Section 454.10 Protection of Environment... MANUFACTURING POINT SOURCE CATEGORY Char and Charcoal Briquets Subcategory § 454.10 Applicability; description of the manufacture of char and charcoal briquets subcategory. The provisions of this subpart...

  2. 76 FR 24504 - Agency Information Collection Activities: BioWatch Filter Holder Log

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-05-02

    ... information from BioWatch jurisdictions. The BioWatch Program operates aerosol collector equipment in... installing and removing filters from aerosol collection devices and transportation to local laboratories...

  3. Evaluating Waste Charcoal as Potential Rubber Composite Filler

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Carbon black, a byproduct of the petroleum industry, is the world's most predominant filler for rubber composites. In this study, charcoal in the form of pyrolyzed agricultural products was evaluated as potential carbon-based filler for rubber composites made with carboxylated styrene-butadiene lat...

  4. Charcoal byproducts as potential styrene-butadiene rubber composte filler

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Carbon black, a byproduct of the petroleum industry, is the world's most predominant filler for rubber composites. In this study, various renewable charcoals in the form of pyrolyzed agricultural byproducts were evaluted as potential carbon-based filler for rubber composites made with carboxylated s...

  5. EMISSIONS FROM STREET VENDOR COOKING DEVICES (CHARCOAL GRILLING)

    EPA Science Inventory

    The report discusses a joint U.S./Mexican program to establish a reliable emissions inventory for street vendor cooking devices (charcoal grilling), a significant source of air pollutants in the Mexicali-Imperial Valley area of Mexico. Emissions from these devices, prevalent in t...

  6. Small Scale Charcoal Making: A Manual for Trainers.

    ERIC Educational Resources Information Center

    Karch, Ed; And Others

    This training program offers skills training in all stages of the development of technologies related to small-scale charcoal production, including the design, construction, operation, maintenance, repair, and evaluation of prototype kilns. The kiln designs are selected to be as consistent as possible with the realities of rural areas in…

  7. EMISSIONS FROM STREET VENDOR COOKING DEVICES (CHARCOAL GRILLING) - PROJECT SUMMARY

    EPA Science Inventory

    The report discusses a joint U.S./Mexican program to establish a reliable emissions inventory for street vendor cooking devices (charcoal grilling), a significant source of air pollutants in the Mexicali-Imperial Valley area of Mexico. Emissions from these devices, prevalent in t...

  8. Microsatellites from the charcoal rot fungus (Macrophomina phaseolina)

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Microsatellite loci were identified from the charcoal rot fungus Macrophomina phaseolina. Primer pairs for 46 loci were developed and of these 13 were optimized and screened using genomic DNA from 44 fungal isolates collected predominantly from two soybean fields in MS. All optimized loci were poly...

  9. Experimental validation and testing of components for active damping control for micromachined mechanical vibration isolation filters using electrostatic actuation

    NASA Astrophysics Data System (ADS)

    Dean, Robert; Flowers, George; Sanders, Nicole; Horvath, Roland; Johnson, Wayne; Kranz, Michael; Whitley, Michael

    2006-03-01

    Missiles, rockets and certain types of industrial machinery are exposed extreme vibration environments, with high frequency/amplitude mechanical vibrations which may be detrimental to components that are sensitive to these high frequency mechanical vibrations, such as MEMS gyroscopes and resonators, oscillators and some micro optics. Exposure to high frequency mechanical vibrations can lead to a variety of problems, from reduced sensitivity and an increased noise floor to the outright mechanical failure of the device. One approach to mitigate such effects is to package the sensitive device on a micromachined vibration isolator tuned to the frequency range of concern. In this regard, passive micromachined silicon lowpass filter structures (spring-mass-damper) have been developed and demonstrated. However, low damping (especially if operated in near-vacuum environments) and a lack of tunability after fabrication has limited the effectiveness and general applicability of such systems. Through the integration of a electrostatic actuator, a relative velocity sensor and the passive filter structure, an active micromachined mechanical lowpass vibration isolation filter can be realized where the damping and resonant frequency can be tuned. This paper presents the development and validation of a key component of the micromachined active filter, a sensor for measuring the relative velocity between micromachined structures.

  10. Tri (2-chloroisopropyl) phosphate--an unexpected organochlorine contaminant in some charcoal air-sampling sorbent tubes

    SciTech Connect

    van Netten, C.; Brands, R.; Park, J.; Deverall, R. )

    1991-09-01

    Air sampling in a government building was necessary in response to reports of a cancer cluster. SKC (Eighty Four, Pa.) charcoal coconut shell-based sorbent tubes (226-01 lot 120) were recommended for this procedure. A recently purchased supply was present at the University of British Columbia and consequently was used for this particular study. Analysis of the front charcoal section showed the presence of a flame retardant, tri (2-chloroisopropyl) phosphate, which was confirmed by gas liquid chromatography (GLC) and mass spectrometry analysis. In an effort to identify the source of this fire retardant in the building, it became apparent from the analysis done on unknown field blanks that tri (2-chloroisopropyl) phosphate was a contaminant of the sorbent tubes used. Analysis of additional blank tubes identified the foam separators as the most likely source of contamination. Levels of tri (2-chloroisopropyl) phosphate in the front charcoal section ranged from 1.3 to 5.9 micrograms. The foam separator contained between 11.4 and 16.5 micrograms, and the backup charcoal section contained between 14.5 and 24.0 micrograms of tri (2-chloroisopropyl) phosphate. In addition, another flame retardant, tri (1,3 dichloro-2-propyl) phosphate was also found. Because these contaminants have long column retention times in GLC, it may not be apparent that these contaminants are present and consequently are likely to have modified the sorbent characteristics of the activated charcoal. Another batch of sorbent tubes bearing the same catalog number and lot number was purchased from the supplier; no flame retardants were found in this batch.

  11. Paired charcoal and tree-ring records of high-frequency Holocene fire from two New Mexico bog sites

    USGS Publications Warehouse

    Allen, C.D.; Anderson, R. Scott; Jass, R.B.; Toney, J.L.; Baisan, C.H.

    2008-01-01

    Two primary methods for reconstructing paleofire occurrence include dendrochronological dating of fire scars and stand ages from live or dead trees (extending back centuries into the past) and sedimentary records of charcoal particles from lakes and bogs, providing perspectives on fire history that can extend back for many thousands of years. Studies using both proxies have become more common in regions where lakes are present and fire frequencies are low, but are rare where high-frequency surface fires dominate and sedimentary deposits are primarily bogs and wetlands. Here we investigate sedimentary and fire-scar records of fire in two small watersheds in northern New Mexico, in settings recently characterised by relatively high-frequency fire where bogs and wetlands (Chihuahuen??os Bog and Alamo Bog) are more common than lakes. Our research demonstrates that: (1) essential features of the sedimentary charcoal record can be reproduced between multiple cores within a bog deposit; (2) evidence from both fire-scarred trees and charcoal deposits documents an anomalous lack of fire since ???1900, compared with the remainder of the Holocene; (3) sedimentary charcoal records probably underestimate the recurrence of fire events at these high-frequency fire sites; and (4) the sedimentary records from these bogs are complicated by factors such as burning and oxidation of these organic deposits, diversity of vegetation patterns within watersheds, and potential bioturbation by ungulates. We consider a suite of particular challenges in developing and interpreting fire histories from bog and wetland settings in the Southwest. The identification of these issues and constraints with interpretation of sedimentary charcoal fire records does not diminish their essential utility in assessing millennial-scale patterns of fire activity in this dry part of North America. ?? IAWF 2008.

  12. A comparison of biologically active filters for the removal of ozone by-products, turbidity, and particles

    SciTech Connect

    Coffey, B.M.; Krasner, S.W.; Sclimenti, M.J.; Hacker, P.A.; Gramith, J.T.

    1996-11-01

    Biofiltration tests were performed at the Metropolitan Water District of Southern California`s 5.5-mgd (21,000 m{sup 3}d) demonstration plant using two 400 ft{sup 2} (37 m{sup 2}) anthracite/sand filters and a 6 ft{sup 2} (0.56 m{sup 2}) granular activated carbon (GAC)/sand filter operated in parallel. The empty-bed contact time (EBCT) within the GAC and anthracite ranged from 2.1-3.1 min. The filters were evaluated based on (1) conventional filtration performance (turbidity, particle removal, and headloss); (2) removal of biodegradable ozone by-products (assimilable organic carbon [AOC], aldehydes, and aldoketoacids) after startup; (3) removal of biodegradable ozone by-products at steady state; and (4) resistance to short-term process upsets such as intermittent chlorination or filter out-of-service time. Approximately 80 percent formaldehyde removal was achieved by the anthracite/sand filter operated at a 2.1-min EBCT (6 gpm/ft{sup 2} [15 m/h]) within 8 days of ozone operation. The GAC/sand filter operated at the same rate achieved 80 percent removal within 1 day, possibly as an additive effect of adsorption and biological removal. In-depth aldehyde monitoring at four depths (0.5-min EBCT intervals) provided additional insight into the removal kinetics. During periods of warmer water temperature, from 20 to 48 percent of the AOC was removed in the flocculation/sedimentation basins by 40-75 percent. This percentage removal typically resulted in AOC concentrations within 40 {mu}g C/L of the raw, unozonated water levels.

  13. Charcoal and fly-ash particles from Lake Lucerne sediments (Central Switzerland) characterized by image analysis: anthropologic, stratigraphic and environmental implications

    NASA Astrophysics Data System (ADS)

    Thevenon, Florian; Anselmetti, Flavio S.

    2007-10-01

    In order to link the charcoal record from sedimentary archives with the combustion processes that reflect past anthropogenic activity, a novel method based on automated image analysis was developed. It allows a detailed quantification and morphological analysis of the combustion-derived products that were emitted in the area of Lake Lucerne (Central Europe) throughout the last 7200 years. Charcoal-particle distribution reconstructed from the composite sedimentary record shows that the charcoal input is primarily linked to redistribution of detrital μm-size charcoal degradation products from surface runoff into the large lake basin. However, the independent distribution of the coarser charcoal fraction (>38 μm) exhibits four major periods of large-scale fire activity around 5500, 3300, 2400, and 530 cal. BP. These events are synchronous with major anthropogenic changes (lake-dwellings, land-use changes, technological innovations), although it is possible that these major fire episodes could have been indirectly triggered by climatic deterioration and unfavorable environmental conditions. During the late-nineteenth-century, a great increase in slag particles and magnetic spherules of fly-ash occurred due to the steamboat navigation on Lake Lucerne. The successive burning of wood (after AD 1838), coal (after AD 1862), and diesel (after AD 1931) by the steamboat traffic produced specific particle shapes, providing valuable chronological markers for dating the recent sediments and a proxy for fossil fuel combustion.

  14. [Labor process and workers' health in charcoal production in Minas Gerais, Brazil].

    PubMed

    Dias, Elizabeth Costa; Assuncao, Ada Avila; Guerra, Cláudio Bueno; Cano Prais, Hugo Alejandro

    2002-01-01

    This study is a tentative approach to the relationship between environmental and occupational health and development in a specific situation: charcoal production in the Jequitinhonha Valley, the poorest region in the State of Minas Gerais, Brazil. The study focuses on the labor process, involving heavy exploitation, hazardous working conditions, and extremely precarious living conditions. Working conditions and activities are described and related to the workers' health situation. Social policies and decisive participation by the various social stakeholders are necessary to change this reality. PMID:11910445

  15. Nondestructive neutron activation analysis of volcanic samples: Hawaii

    SciTech Connect

    Zoller, W.H.; Finnegan, D.L.; Crowe, B.

    1986-01-01

    Samples of volcanic emissions have been collected between and during eruptions of both Kilauea and Mauna Loa volcanoes during the last three years. Airborne particles have been collected on Teflon filters and acidic gases on base-impregnated cellulose filters. Chemically neutral gas-phase species are collected on charcoal-coated cellulose filters. The primary analytical technique used is nondestructive neutron activation analysis, which has been used to determine the quantities of up to 35 elements on the different filters. The use of neutron activation analysis makes it possible to analyze for a wide range of elements in the different matrices used for the collection and to learn about the distribution between particles and gas phases for each of the elements.

  16. Exploring the Role of Mechanotransduction Activation and Adaptation Kinetics in Hair Cell Filtering Using a Hodgkin-Huxley Approach

    NASA Astrophysics Data System (ADS)

    Wells, Gregg B.; Ricci, Anthony J.

    2011-11-01

    In the auditory system, mechanotransduction occurs in the hair cell sensory hair bundle and is the first major step in the translation of mechanical energy into electrical. Tonotopic variations in the activation kinetics of this process are posited to provide a low pass filter to the input. An adaptation process, also associated with mechanotransduction, is postulated to provide a high pass filter to the input in a tonotopic manner. Together a bandpass filter is created at the hair cell input. Corresponding mechanical components to both activation and adaptation are also suggested to be involved in generating cochlear amplification. A paradox to this story is that hair cells where the mechanotransduction properties are most robust possess an intrinsic electrical resonance mechanism proposed to account for all required tuning and amplification. A simple Hodgkin-Huxley type model is presented to attempt to determine the role of the activation and adaptation kinetics in further tuning hair cells that exhibit electrical resonance. Results further support that steady state mechanotransduction properties are critical for setting the resting potential of the hair cell while the kinetics of activation and adaptation are important for sharpening tuning around the characteristic frequency of the hair cell.

  17. Comparison of active-set method deconvolution and matched-filtering for derivation of an ultrasound transit time spectrum.

    PubMed

    Wille, M-L; Zapf, M; Ruiter, N V; Gemmeke, H; Langton, C M

    2015-06-21

    The quality of ultrasound computed tomography imaging is primarily determined by the accuracy of ultrasound transit time measurement. A major problem in analysis is the overlap of signals making it difficult to detect the correct transit time. The current standard is to apply a matched-filtering approach to the input and output signals. This study compares the matched-filtering technique with active set deconvolution to derive a transit time spectrum from a coded excitation chirp signal and the measured output signal. The ultrasound wave travels in a direct and a reflected path to the receiver, resulting in an overlap in the recorded output signal. The matched-filtering and deconvolution techniques were applied to determine the transit times associated with the two signal paths. Both techniques were able to detect the two different transit times; while matched-filtering has a better accuracy (0.13 μs versus 0.18 μs standard deviations), deconvolution has a 3.5 times improved side-lobe to main-lobe ratio. A higher side-lobe suppression is important to further improve image fidelity. These results suggest that a future combination of both techniques would provide improved signal detection and hence improved image fidelity. PMID:26047163

  18. Object detection and tracking with active camera on motion vectors of feature points and particle filter.

    PubMed

    Chen, Yong; Zhang, Rong-Hua; Shang, Lei; Hu, Eric

    2013-06-01

    A method based on motion vectors of feature points and particle filter has been proposed and developed for an active∕moving camera for object detection and tracking purposes. The object is detected by histogram of motion vectors first, and then, on the basis of particle filter algorithm, the weighing factors are obtained via color information. In addition, re-sampling strategy and surf feature points are used to remedy the drawback of particle degeneration. Experimental results demonstrate the practicability and accuracy of the new method and are presented in the paper. PMID:23822380

  19. Water Filter

    NASA Technical Reports Server (NTRS)

    1982-01-01

    A compact, lightweight electrolytic water sterilizer available through Ambassador Marketing, generates silver ions in concentrations of 50 to 100 parts per billion in water flow system. The silver ions serve as an effective bactericide/deodorizer. Tap water passes through filtering element of silver that has been chemically plated onto activated carbon. The silver inhibits bacterial growth and the activated carbon removes objectionable tastes and odors caused by addition of chlorine and other chemicals in municipal water supply. The three models available are a kitchen unit, a "Tourister" unit for portable use while traveling and a refrigerator unit that attaches to the ice cube water line. A filter will treat 5,000 to 10,000 gallons of water.

  20. A novel application of modified bamboo charcoal to treat oil-containing wastewater and its modified mechanism.

    PubMed

    Hu, Cui; Zou, Xiaoming; Liu, Jia; Zhang, Shucong; Feng, Yi; Huang, Xiangfeng

    2014-01-01

    Three conventional coalescence filters including walnut shells (WS), polystyrene resin particles (PR), and quartz sand (QS) were compared with bamboo charcoal (BC) to treat oily wastewater in a coalescence system process. The results showed the order of oil removal efficiency was QS>BC>WS>PR. To improve the oil removal efficiency of BC further, six types of modified BC were prepared. The results showed that the modified BC using silane coupling agent (SCA) significantly increased oil removal efficiency, but the other types (including the use of NaOH, HNO3, H2O2, FeCl3 and ultrasound) of modified BC exhibited nearly the same level of efficiency as that of pure BC. Infra-red, X-ray diffraction, scanning electron microscopy, and the contact angle for modified BC were measured to reveal the modified mechanism. It was found that the higher oil removal efficiency of the SCA-modified BC occurred due to the changed crystal structure of the BC and the increase in its surface hydrophobicity, which resulted in higher oil removal efficiency. Therefore, modified bamboo charcoal is an attractive filter candidate for oil removal in a coalescence system process. PMID:25521135

  1. Effects of autoclaving and charcoal on root-promoting substances present in water extracts made from gelling agents.

    PubMed

    Arthur, G D; Stirk, W A; Van Staden, J

    2006-10-01

    The root-promoting ability of water extracts made from gelling agents (agar and Gelrite) was investigated using the mungbean rooting bioassay. Autoclaving these water extracts decreased the number of roots in mungbean cuttings compared to the controls. The addition of activated charcoal to the water extracts from Agar Bacteriological and Agar Commercial Gel had no effect on their root-promoting ability. Extracts with exogenous indole-3-butyric acid (IBA) which were treated by autoclaving or via a freeze-thaw cycle, significantly increased rooting. However, incorporation of activated charcoal to similar IBA-containing extracts reduced rooting. Our results indicate that more attention should be given to the choice of gelling agent and its interaction with other additives in the media used during tissue culture. PMID:16274988

  2. Spatiotemporal patterns of tundra fires: late-Quaternary charcoal records from Alaska

    NASA Astrophysics Data System (ADS)

    Chipman, M. L.; Hudspith, V.; Higuera, P. E.; Duffy, P. A.; Kelly, R.; Oswald, W. W.; Hu, F. S.

    2015-07-01

    Anthropogenic climate change has altered many ecosystem processes in the Arctic tundra and may have resulted in unprecedented fire activity. Evaluating the significance of recent fires requires knowledge from the paleofire record because observational data in the Arctic span only several decades, much shorter than the natural fire rotation in Arctic tundra regions. Here we report results of charcoal analysis on lake sediments from four Alaskan lakes to infer the broad spatial and temporal patterns of tundra-fire occurrence over the past 35 000 years. Background charcoal accumulation rates are low in all records (range is 0-0.05 pieces cm-2 yr-1), suggesting minimal biomass burning across our study areas. Charcoal peak analysis reveals that the mean fire-return interval (FRI; years between consecutive fire events) ranged from ca. 1650 to 6050 years at our sites, and that the most recent fire events occurred from ca. 880 to 7030 years ago, except for the CE 2007 Anaktuvuk River Fire. These mean FRI estimates are longer than the fire rotation periods estimated for the past 63 years in the areas surrounding three of the four study lakes. This result suggests that the frequency of tundra burning was higher over the recent past compared to the late Quaternary in some tundra regions. However, the ranges of FRI estimates from our paleofire records overlap with the expected values based on fire-rotation-period estimates from the observational fire data, and the differences are statistically insignificant. Together with previous tundra-fire reconstructions, these data suggest that the rate of tundra burning was spatially variable and that fires were extremely rare in our study areas throughout the late Quaternary. Given the rarity of tundra burning over multiple millennia in our study areas and the pronounced effects of fire on tundra ecosystem processes such as carbon cycling, dramatic tundra ecosystem changes are expected if anthropogenic climate change leads to more

  3. Retention of titanium dioxide nanoparticles in biological activated carbon filters for drinking water and the impact on ammonia reduction.

    PubMed

    Liu, Zhiyuan; Yu, Shuili; Park, Heedeung; Liu, Guicai; Yuan, Qingbin

    2016-06-01

    Given the increasing discoveries related to the eco-toxicity of titanium dioxide (TiO2) nanoparticles (NPs) in different ecosystems and with respect to public health, it is important to understand their potential effects in drinking water treatment (DWT). The effects of TiO2 NPs on ammonia reduction, ammonia-oxidizing archaea (AOA) and ammonia-oxidizing bacteria (AOB) in biological activated carbon (BAC) filters for drinking water were investigated in static and dynamic states. In the static state, both the nitrification potential and AOB were significantly inhibited by 100 μg L(-1) TiO2 NPs after 12 h (p < 0.05), and the threshold decreased to 10 μg L(-1) with prolonged exposure (36 h, p < 0.05). However, AOA were not considerably affected in any of the tested conditions (p > 0.05). In the dynamic state, different amounts of TiO2 NP pulses were injected into three pilot-scale BAC filters. The decay of TiO2 NPs in the BAC filters was very slow. Both titanium quantification and scanning electron microscope analysis confirmed the retention of TiO2 NPs in the BAC filters after 134 days of operation. Furthermore, the TiO2 NP pulses considerably reduced the performance of ammonia reduction. This study identified the retention of TiO2 NPs in BAC filters and the negative effect on the ammonia reduction, suggesting a potential threat to DWT by TiO2 NPs. PMID:26931341

  4. Time-domain filtered-x-Newton narrowband algorithms for active isolation of frequency-fluctuating vibration

    NASA Astrophysics Data System (ADS)

    Li, Yan; He, Lin; Shuai, Chang-geng; Wang, Fei

    2016-04-01

    A time-domain filtered-x Newton narrowband algorithm (the Fx-Newton algorithm) is proposed to address three major problems in active isolation of machinery vibration: multiple narrowband components, MIMO coupling, and amplitude and frequency fluctuations. In this algorithm, narrowband components are extracted by narrowband-pass filters (NBPF) and independently controlled by multi-controllers, and fast convergence of the control algorithm is achieved by inverse secondary-path filtering of the extracted sinusoidal reference signal and its orthogonal component using L×L numbers of 2nd-order filters in the time domain. Controller adapting and control signal generation are also implemented in the time domain, to ensure good real-time performance. The phase shift caused by narrowband filter is compensated online to improve the robustness of control system to frequency fluctuations. A double-reference Fx-Newton algorithm is also proposed to control double sinusoids in the same frequency band, under the precondition of acquiring two independent reference signals. Experiments are conducted with an MIMO single-deck vibration isolation system on which a 200 kW ship diesel generator is mounted, and the algorithms are tested under the vibration alternately excited by the diesel generator and inertial shakers. The results of control over sinusoidal vibration excited by inertial shakers suggest that the Fx-Newton algorithm with NBPF have much faster convergence rate and better attenuation effect than the Fx-LMS algorithm. For swept, frequency-jumping, double, double frequency-swept and double frequency-jumping sinusoidal vibration, and multiple high-level harmonics in broadband vibration excited by the diesel generator, the proposed algorithms also demonstrate large vibration suppression at fast convergence rate, and good robustness to vibration with frequency fluctuations.

  5. 76 FR 42130 - Agency Information Collection Activities: BioWatch Filter Holder Log

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-18

    ... collection request (ICR) in the Federal Register on May 2, 2011 at 76 FR 24504, for a 60-day public comment... information from BioWatch jurisdictions. The BioWatch Program operates aerosol collector equipment in... installing and removing filters from aerosol collection devices and transportation to local laboratories...

  6. Stack filters

    NASA Astrophysics Data System (ADS)

    Wendt, P. D.; Coyle, E. J.; Gallagher, N. C., Jr.

    1986-08-01

    A large class of easily implemented nonlinear filters called stack filters are discussed which includes the rank order operators in addition to the compositions of morphological operators. Techniques similar to those used to determine the root signal behavior of median filters are employed to study the convergence properties of the filters, and necessary conditions for a stack filter to preserve monotone regions or edges in signals, and the output distribution of the filters, are obtained. Among the stack filters of window width three are found asymmetric median filters in which one removes only positive going edges, the other removes only negative going edges, while the median filter removes impulses of both signs.

  7. Alexandria's Eastern Harbor, Egypt: Pollen, microscopic charcoal, and the transition from natural to human-modified basin

    USGS Publications Warehouse

    Stanley, J.-D.; Bernhardt, C.E.

    2010-01-01

    Pollen and microscopic charcoal examined in Holocene sediment core samples record major environmental modifications affecting Alexandria's Eastern Harbor through time. We assess whether such changes on Egypt's coastal margin were influenced primarily by natural, or natural plus human, or primarily human factors. We focus on (1) the times when pollen assemblages and microscopic charcoal content changed in the core, (2) how they changed, and (3) why this occurred. The analysis takes into account the core's stratigraphy, regional climate variability, human history, and local archaeological record. Four pollenmicroscopic charcoal zones are identified. The earliest change occurred at ca. 6000 YBP, during Egypt's earlier Predynastic (Neolithic) period, coinciding with a lithologic break from sand to muddy sand. Pollen during this time indicates a transition to a much drier climate rather than effects of human activity. The second change in pollen occurred 3600-2900 YBP, during a period of continued aridity with no lithologic variation in this core interval. Pollen (cereal taxa, agricultural weeds, grape) and a sharp increase in microscopic charcoal indicate that human activity became prevalent at least 700 y before Alexander the Great's arrival in this region, and these results highlight the transition from a largely natural climatecontrolled environment to one influenced by both climate and anthropogenic activity. The third shift up-core in pollen assemblages is dated at ca. 2300 YBP, at the boundary between a sand and mud unit. It coincides with construction by the Ptolemies of the Heptastadion between Alexandria and Pharos Island. From this time onward, harbor sediment in the nearly enclosed catchment basin indicates a near-continuous record of dominant proximal human activity. ?? 2010 Coastal Education and Research Foundation.

  8. Discussions and Comparisons between Comprehensive Harmonic Detection and Specific Harmonic Detection in a Shunt Active Filter for Installation on a Power Distribution System

    NASA Astrophysics Data System (ADS)

    Yamashita, Hiroshi; Pichai, Jintakosonwit; Fujita, Hideaki; Akagi, Hirofumi; Shinohara, Junya

    This paper deals with harmonic voltage detection methods for a shunt active filter intended for installation on a power distribution system. The active filter acts as a resistor to damp out harmonic propagation throughout the power distribution system. However, the active filter may fall into an unstable condition, because the control system forms a complex feedback loop including harmonic detection, current control, and system impedance. Stability and harmonic-damping performance of two different harmonic detection methods, that are comprehensive harmonic detection and specific harmonic detection, are compared with each other. Moreover, a new compensation scheme for the comprehensive harmonic detection method is proposed to improve system stability.

  9. Charcoal analysis and Holocene vegetation history in southern Syria

    NASA Astrophysics Data System (ADS)

    Willcox, George

    1999-04-01

    Charcoal analysis of three archaeological sites in southern Syria in the vicinity of the Jebel al Arab (formerly Jebel Druze) indicates that during the Early Bronze Age an association consisting predominately of Pistacia, deciduous oak and almond was exploited. During the Middle Bronze Age these taxa diminish and are partially replaced by more steppic species or introduced wood such as olive. During the Roman period evergreen oak appeared in the region and gradually replaced the deciduous oak which is now restricted to a small area. The gradual replacement of deciduous oaks by evergreen oaks has been observed in other areas of the Mediterranean basin during the Holocene. Conifer charcoal such as pine and cedar is present on the sites, but it is not clear whether these were local or imported from farther away, for example, the Lebanese highlands. During the Middle Bronze Age olive wood was also used as combustible but here also its exact origin is not known.

  10. Modelling the combustion of charcoal in a model blast furnace

    NASA Astrophysics Data System (ADS)

    Shen, Yansong; Shiozawa, Tomo; Yu, Aibing; Austin, Peter

    2013-07-01

    The pulverized charcoal (PCH) combustion in ironmaking blast furnaces is abstracting remarkable attention due to various benefits such as lowering CO2 emission. In this study, a three-dimensional CFD model is used to simulate the flow and thermo-chemical behaviours in this process. The model is validated against the experimental results from a pilot-scale combustion test rig for a range of conditions. The typical flow and thermo-chemical phenomena is simulated. The effect of charcoal type, i.e. VM content is examined, showing that the burnout increases with VM content in a linear relationship. This model provides an effective way for designing and optimizing PCH operation in blast furnace practice.

  11. Charcoal-methanol adsorption refrigerator powered by a compound parabolic concentrating solar collector

    SciTech Connect

    Headley, O.StC.; Kothdiwala, A.F.; McDoom, I.A. )

    1994-08-01

    A compound parabolic concentrating solar collector (CPC) of concentration ratio 3.9 and aperture area 2.0 m[sup 2] was used to power an intermittent solid adsorption refrigerator and ice maker using activated charcoal (carbon) as the adsorbing medium and methanol as the working fluid. The copper tube receiver of the CPC was packed with 2.5 kg of imported adsorbent 207E3, which was only utilized when the performance of activated charcoal (ACJ1, produced from local coconut shells) was found to be inferior to the imported adsorbent. Up to 1 kg of ice at an evaporator temperature of [minus]6[degrees]C was produced, with the net solar coefficient of performance (COP) being of the order of 0.02. Maximum receiver/adsorbent temperature recorded was 154[degrees]C on a day when the insolation was 26.8 MJ/m[sup [minus]2]. Temperatures in excess of 150[degrees]C are undesirable since they favour the conversion of methanol to dimethyl ether, a noncondensable gas which inhibits both condensation and adsorption. The major advantage of this system is its ability to produce ice even on overcast days (insolation [approximately] 10 MJ/m[sup [minus]2]).

  12. The Bacterial Communities of Full-Scale Biologically Active, Granular Activated Carbon Filters Are Stable and Diverse and Potentially Contain Novel Ammonia-Oxidizing Microorganisms

    PubMed Central

    Hope Wilkinson, Katheryn; Strait, Jacqueline M.; Hozalski, Raymond M.; Sadowksy, Michael J.; Hamilton, Matthew J.

    2015-01-01

    The bacterial community composition of the full-scale biologically active, granular activated carbon (BAC) filters operated at the St. Paul Regional Water Services (SPRWS) was investigated using Illumina MiSeq analysis of PCR-amplified 16S rRNA gene fragments. These bacterial communities were consistently diverse (Shannon index, >4.4; richness estimates, >1,500 unique operational taxonomic units [OTUs]) throughout the duration of the 12-month study period. In addition, only modest shifts in the quantities of individual bacterial populations were observed; of the 15 most prominent OTUs, the most highly variable population (a Variovorax sp.) modulated less than 13-fold over time and less than 8-fold from filter to filter. The most prominent population in the profiles was a Nitrospira sp., representing 13 to 21% of the community. Interestingly, very few of the known ammonia-oxidizing bacteria (AOB; <0.07%) and no ammonia-oxidizing Archaea were detected in the profiles. Quantitative PCR of amoA genes, however, suggested that AOB were prominent in the bacterial communities (amoA/16S rRNA gene ratio, 1 to 10%). We conclude, therefore, that the BAC filters at the SPRWS potentially contained significant numbers of unidentified and novel ammonia-oxidizing microorganisms that possess amoA genes similar to those of previously described AOB. PMID:26209671

  13. The Bacterial Communities of Full-Scale Biologically Active, Granular Activated Carbon Filters Are Stable and Diverse and Potentially Contain Novel Ammonia-Oxidizing Microorganisms.

    PubMed

    LaPara, Timothy M; Hope Wilkinson, Katheryn; Strait, Jacqueline M; Hozalski, Raymond M; Sadowksy, Michael J; Hamilton, Matthew J

    2015-10-01

    The bacterial community composition of the full-scale biologically active, granular activated carbon (BAC) filters operated at the St. Paul Regional Water Services (SPRWS) was investigated using Illumina MiSeq analysis of PCR-amplified 16S rRNA gene fragments. These bacterial communities were consistently diverse (Shannon index, >4.4; richness estimates, >1,500 unique operational taxonomic units [OTUs]) throughout the duration of the 12-month study period. In addition, only modest shifts in the quantities of individual bacterial populations were observed; of the 15 most prominent OTUs, the most highly variable population (a Variovorax sp.) modulated less than 13-fold over time and less than 8-fold from filter to filter. The most prominent population in the profiles was a Nitrospira sp., representing 13 to 21% of the community. Interestingly, very few of the known ammonia-oxidizing bacteria (AOB; <0.07%) and no ammonia-oxidizing Archaea were detected in the profiles. Quantitative PCR of amoA genes, however, suggested that AOB were prominent in the bacterial communities (amoA/16S rRNA gene ratio, 1 to 10%). We conclude, therefore, that the BAC filters at the SPRWS potentially contained significant numbers of unidentified and novel ammonia-oxidizing microorganisms that possess amoA genes similar to those of previously described AOB. PMID:26209671

  14. Contaminant breakthrough: A theoretical study of charcoal sampling tubes

    SciTech Connect

    Yoon, Y.H.; Nelson, J.H. )

    1990-06-01

    A previously developed theoretical model was applied to investigate contaminant breakthrough on charcoal sampling tubes. Associated with the model are two important theoretical parameters. These parameters are k' (a rate constant) and tau (the time required for 50% contaminant breakthrough). In this study, values of K' and tau were determined for n-heptane at five different concentration levels in air: 98, 117, 234, 330, and 988 ppm. These values were used along with pertinent theoretical considerations to calculate the entire (0-100%) breakthrough curve (plot of percent breakthrough versus time) regarding the adsorbance of n-heptane on charcoal sampling tubes. In addition, available experimental data for perchloroethylene, isobutyl acetate, ethyl acetate, and dichloromethane were used in conjunction with the theory to generate theoretical breakthrough curves over the entire range of 0 to 100%. In each case, calculated theoretical breakthrough curves are in remarkable agreement with corresponding experimental data. With the use of an additional theoretical parameter, a, the theory was extended to calculate the weight of contaminant collected on a single element (section) of a charcoal sampling tube at 10% breakthrough and at each of several different contaminant assault concentrations.

  15. The Impact of Media Reporting on the Emergence of Charcoal Burning Suicide in Taiwan

    PubMed Central

    Chen, Ying-Yeh; Chen, Feng; Gunnell, David; Yip, Paul S. F.

    2013-01-01

    We investigated the association of the intensity of newspaper reporting of charcoal burning suicide with the incidence of such deaths in Taiwan during 1998–2002. A counting process approach was used to estimate the incidence of suicides and intensity of news reporting. Conditional Poisson generalized linear autoregressive models were performed to assess the association of the intensity of newspaper reporting of charcoal burning and non-charcoal burning suicides with the actual number of charcoal burning and non-charcoal burning suicides the following day. We found that increases in the reporting of charcoal burning suicide were associated with increases in the incidence of charcoal burning suicide on the following day, with each reported charcoal burning news item being associated with a 16% increase in next day charcoal burning suicide (p<.0001). However, the reporting of other methods of suicide was not related to their incidence. We conclude that extensive media reporting of charcoal burning suicides appears to have contributed to the rapid rise in the incidence of the novel method in Taiwan during the initial stage of the suicide epidemic. Regulating media reporting of novel suicide methods may prevent an epidemic spread of such new methods. PMID:23383027

  16. NMR characterization of 13C-benzene sorbed to natural and prepared charcoals.

    PubMed

    Smernik, Ronald J; Kookana, Rai S; Skjemstad, Jan O

    2006-03-15

    We investigated how the NMR properties of uniformly 13C-labeled benzene molecules are influenced by sorption to charcoals produced in the laboratory and collected from the field following wildfires. Uniformly 13C-labeled benzene was sorbed to two charcoals produced in the laboratory at 450 and 850 degrees C. The chemical shift of benzene sorbed to the higher-temperature charcoal was 5-6 ppm lower than that of benzene sorbed to the lower-temperature charcoal. This difference was attributed to stronger diamagnetic ring currents (which cause a shift to lower ppm values) in the more condensed or "graphitic" high-temperature charcoal. The chemical shift of benzene sorbed to two charcoals collected from the field following wildfires indicated a degree of charcoal graphitization intermediate between that of the two laboratory-prepared charcoals. Variable contact time and dipolar dephasing experiments showed that the molecular mobility of sorbed benzene molecules increased with increasing charcoal graphitization, and also increased with increasing benzene concentration. We propose that the chemical shift displacement of molecules sorbed to charcoal could be used to identify molecules sorbed to black carbon in heterogeneous matrixes such as soils and sediments, and to establish how condensed or "graphitic" the black carbon is. PMID:16570595

  17. Frequency dependence of sensitivities in second-order RC active filters

    NASA Astrophysics Data System (ADS)

    Kunieda, T.; Hiramatsu, Y.; Fukui, A.

    1980-02-01

    This paper presents that gain and phase sensitivities to some element in biquadratic filters approximately constitute a circle on the complex sensitivity plane, provided that the quality factor Q of the circuit is appreciably larger than unity. Moreover, the group delay sensitivity is represented by the imaginary part of a cardioid. Using these results, bounds of maximum values of gain, phase, and group delay sensitivities are obtained. Further, it is proved that the maximum values of these sensitivities can be simultaneously minimized by minimizing the absolute value of the transfer function sensitivity at the center frequency provided that w(0)-sensitivities are constant and do not contain design parameters. Next, a statistical variability measure for the optimal-filter design is proposed. Finally, the relation between some variability measures proposed to the present time is made clear.

  18. Charcoal from a prehistoric copper mine in the Austrian Alps: dendrochronological and dendrological data, demand for wood and forest utilisation

    PubMed Central

    Pichler, Thomas; Nicolussi, Kurt; Goldenberg, Gert; Hanke, Klaus; Kovács, Kristóf; Thurner, Andrea

    2013-01-01

    During prehistory fire-setting was the most appropriate technique for exploiting ore deposits. Charcoal fragments found in the course of archaeological excavations in a small mine called Mauk E in the area of Schwaz/Brixlegg (Tyrol, Austria) are argued to be evidence for the use of this technology. Dendrochronological analyses of the charcoal samples yielded calendar dates for the mining activities showing that the exploitation of the Mauk E mine lasted approximately one decade in the late 8th century BC. Dendrological studies show that the miners utilised stem wood of spruce and fir from forests with high stand density for fire-setting and that the exploitation of the Mauk E mine had only a limited impact on the local forests. PMID:23565025

  19. Charcoal from a prehistoric copper mine in the Austrian Alps: dendrochronological and dendrological data, demand for wood and forest utilisation.

    PubMed

    Pichler, Thomas; Nicolussi, Kurt; Goldenberg, Gert; Hanke, Klaus; Kovács, Kristóf; Thurner, Andrea

    2013-02-01

    During prehistory fire-setting was the most appropriate technique for exploiting ore deposits. Charcoal fragments found in the course of archaeological excavations in a small mine called Mauk E in the area of Schwaz/Brixlegg (Tyrol, Austria) are argued to be evidence for the use of this technology. Dendrochronological analyses of the charcoal samples yielded calendar dates for the mining activities showing that the exploitation of the Mauk E mine lasted approximately one decade in the late 8th century BC. Dendrological studies show that the miners utilised stem wood of spruce and fir from forests with high stand density for fire-setting and that the exploitation of the Mauk E mine had only a limited impact on the local forests. PMID:23565025

  20. Removal of radioactive cesium (134Cs plus 137Cs) from low-level contaminated water by charcoal and broiler litter biochar

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Various charcoals (used in food processing and water treatment) and broiler litter biochar were examined for ability to adsorb water-soluble low-level radioactive cesium (ca. 200-250 Bq/kg) extracted from contaminated wheat bran. Among the materials tested, steam activated broiler litter biochar was...

  1. An advanced static var compensator based on a three level IGBT inverter modelling analysis and active power filtering

    NASA Astrophysics Data System (ADS)

    Draou, Azeddine

    2012-12-01

    This paper presents the dynamic performance analysis of an Advanced Static Var Compensator (ASVC) using three-level neutral point-clamped voltage source inverter. The paper presents the principles of operating and the method of reference currents generation. The dynamic behaviour of the system is further analysed using Matlab/Simulink with SimPower Systems toolbox through a set of simulation tests. The results obtained have been applied to an active power filter which might lead to the design of a robust controller for current harmonics and reactive power applications

  2. Moving Average Convergence Divergence filter preprocessing for real-time event-related peak activity onset detection : application to fNIRS signals.

    PubMed

    Durantin, Gautier; Scannella, Sebastien; Gateau, Thibault; Delorme, Arnaud; Dehais, Frederic

    2014-01-01

    Real-time solutions for noise reduction and signal processing represent a central challenge for the development of Brain Computer Interfaces (BCI). In this paper, we introduce the Moving Average Convergence Divergence (MACD) filter, a tunable digital passband filter for online noise reduction and onset detection without preliminary learning phase, used in economic markets analysis. MACD performance was tested and benchmarked with other filters using data collected with functional Near Infrared Spectoscopy (fNIRS) during a digit sequence memorization task. This filter has a good performance on filtering and real-time peak activity onset detection, compared to other techniques. Therefore, MACD could be implemented for efficient BCI design using fNIRS. PMID:25570400

  3. Charcoal morphometry for paleoecological analysis: The effects of fuel type and transportation on morphological parameters1

    PubMed Central

    Crawford, Alastair J.; Belcher, Claire M.

    2014-01-01

    • Premise of the study: Charcoal particles preserved in sediments are used as indicators of paleowildfire. Most research focuses on abundance as an indicator of fire frequency, but charcoals also convey information about the vegetation from which they are derived. One potential source of information is their morphology, which is influenced by the parent material, the nature of the fire, and subsequent transportation and burial. • Methods: We charcoalified 26 materials from a range of plant taxa, and subjected them to simulated fluvial transport by tumbling them with water and gravel. We photographed the resulting particles, and used image analysis software to measure morphological parameters. • Results: Leaf charcoal displayed a logarithmic decrease in area, and a logarithmic increase in circularity, with transportation time. Trends were less clear for stem or wood charcoal. Grass charcoal displayed significantly higher aspect ratios than other charcoal types. • Conclusions: Leaf charcoal displays more easily definable relationships between morphological parameters and degree of breakdown than stem or wood charcoal. The aspect ratios of fossil mesocharcoal can indicate the broad botanical source of an assemblage. Coupled to estimates of charcoal abundance, this will improve understanding of the variation in flammability of ancient ecosystems. PMID:25202644

  4. Recovery and Determination of Adsorbed Technetium on Savannah River Site Charcoal Stack Samples

    SciTech Connect

    Lahoda, Kristy G.; Engelmann, Mark D.; Farmer, Orville T.; Ballou, Nathan E.

    2008-03-01

    Experimental results are provided for the sample analyses for technetium (Tc) in charcoal samples placed in-line with a Savannah River Site (SRS) processing stack effluent stream as a part of an environmental surveillance program. The method for Tc removal from charcoal was based on that originally developed with high purity charcoal. Presented is the process that allowed for the quantitative analysis of 99Tc in SRS charcoal stack samples with and without 97Tc as a tracer. The results obtained with the method using the 97Tc tracer quantitatively confirm the results obtained with no tracer added. All samples contain 99Tc at the pg g-1 level.

  5. Disk filter

    DOEpatents

    Bergman, Werner

    1986-01-01

    An electric disk filter provides a high efficiency at high temperature. A hollow outer filter of fibrous stainless steel forms the ground electrode. A refractory filter material is placed between the outer electrode and the inner electrically isolated high voltage electrode. Air flows through the outer filter surfaces through the electrified refractory filter media and between the high voltage electrodes and is removed from a space in the high voltage electrode.

  6. Disk filter

    DOEpatents

    Bergman, W.

    1985-01-09

    An electric disk filter provides a high efficiency at high temperature. A hollow outer filter of fibrous stainless steel forms the ground electrode. A refractory filter material is placed between the outer electrode and the inner electrically isolated high voltage electrode. Air flows through the outer filter surfaces through the electrified refractory filter media and between the high voltage electrodes and is removed from a space in the high voltage electrode.

  7. Airborne Laser Scanning (ALS) point cloud ground filtering for area of an active landslide (Doren, Western Austria)

    NASA Astrophysics Data System (ADS)

    Brodić, Nenad; Cvijetinović, Željko; Milenković, Milutin; Dorninger, Peter; Mitrović, Momir

    2014-05-01

    Ground filtering of point cloud is the primary step required for Digital Terrain Model (DTM) generation. The procedure is especially interesting for forested areas, since LiDAR systems can measure terrain elevation under vegetation cover with a high level of penetration. This work analyzes the potential of ALS data ground filtering for area of an active landslide. The results of ALS filtering, for example, may improve geomorphological and motion-detection studies. ALS data was collected during flight campaign 2011 under leaf-off conditions for Doren region, Vorarlberg, Western Austria. In this area, non-ground objects are mostly low vegetation such as shrubs, small trees etc. The vegetation is more dense in lower part of the landslide where erosion is smaller. Vegetation points can be removed based on the hypothesis that these are significantly higher than their neighboring points. However, in case of steep terrain, ground points may have the same heights as vegetation points, and thus, local slope should be considered. Also, if terrain roughness increases, the classification may become even more complex. Software system OPALS (Orientation and Processing of Airborne Laser Scanning data, Vienna University of Technology) was used for processing the ALS data. Labeling ground points has been made using physical and geometrical attributes (parameters) of ALS points. Also additional attributes were calculated in order to improve extraction. Since bare ground surface is usually smooth and continuous unlike vegetation, standard deviation of local elevations was used as roughness measure to differentiate these surfaces. EchoRatio (ER) was adopted as a measure of surface penetrability, while number of echoes and differentiation between echoes (EchoNumber) were also deployed in filtering. Since the ground points are measurements from bare-earth that are usually the lowest surface features in a local area, normalized height was defined as a rank of neighboring points

  8. Impact of Plasma Surface Treatment on Bamboo Charcoal/silver Nanocomposite

    NASA Astrophysics Data System (ADS)

    Vignesh, K.; Vijayalakshmi, K. A.; Karthikeyan, N.

    2016-10-01

    Bamboo charcoal (BC) accompanied silver (Ag) nanocomposite is synthesized through sol-gel method. The produced BC/Ag nanocomposite was surface modified by air and oxygen plasma treatments. Silver ions (Ag+) will serve to improve the antibacterial activity as well as the surface area of BC. Plasma treatment has improved the surface functional groups, crystalline intensity and antibacterial activity of the prepared nanocomposite. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) studies show that Ag nanoparticles have good agreement with BC and the particle size has a mean diameter of 20-40nm. We observe the carboxyl functional groups in Fourier transform infrared spectroscopy (FTIR) after the oxygen plasma treatment. Moreover surface area and adsorption were analyzed by using the Brunauer, Emmett and Teller (BET) surface area (SBET) and UV-Vis spectroscopy.

  9. Acute Kidney Injury Predicts Mortality after Charcoal Burning Suicide

    PubMed Central

    Chen, Yu-Chin; Tseng, Yi-Chia; Huang, Wen-Hung; Hsu, Ching-Wei; Weng, Cheng-Hao; Liu, Shou-Hsuan; Yang, Huang-Yu; Chen, Kuan-Hsin; Chen, Hui-Ling; Fu, Jen-Fen; Lin, Wey-Ran; Wang, I-Kuan; Yen, Tzung-Hai

    2016-01-01

    A paucity of literature exists on risk factors for mortality in charcoal burning suicide. In this observational study, we analyzed the data of 126 patients with charcoal burning suicide that seen between 2002 and 2013. Patients were grouped according to status of renal damage as acute kidney injury (N = 49) or non-acute kidney injury (N = 77). It was found that patients with acute kidney injury suffered severer complications such as respiratory failure (P = 0.002), myocardial injury (P = 0.049), hepatic injury (P < 0.001), rhabdomyolysis (P = 0.045) and out-of-hospital cardiac arrest (P = 0.028) than patients without acute kidney injury. Moreover, patients with acute kidney injury suffered longer hospitalization duration (16.9 ± 18.3 versus 10.7 ± 10.9, P = 0.002) and had higher mortality rate (8.2% versus 0%, P = 0.011) than patients without injury. In a multivariate Cox regression model, it was demonstrated that serum creatinine level (P = 0.019) and heart rate (P = 0.022) were significant risk factors for mortality. Finally, Kaplan-Meier analysis revealed that patients with acute kidney injury suffered lower cumulative survival than without injury (P = 0.016). In summary, the overall mortality rate of charcoal burning suicide population was 3.2%, and acute kidney injury was a powerful predictor of mortality. Further studies are warranted. PMID:27430168

  10. Acute Kidney Injury Predicts Mortality after Charcoal Burning Suicide.

    PubMed

    Chen, Yu-Chin; Tseng, Yi-Chia; Huang, Wen-Hung; Hsu, Ching-Wei; Weng, Cheng-Hao; Liu, Shou-Hsuan; Yang, Huang-Yu; Chen, Kuan-Hsin; Chen, Hui-Ling; Fu, Jen-Fen; Lin, Wey-Ran; Wang, I-Kuan; Yen, Tzung-Hai

    2016-01-01

    A paucity of literature exists on risk factors for mortality in charcoal burning suicide. In this observational study, we analyzed the data of 126 patients with charcoal burning suicide that seen between 2002 and 2013. Patients were grouped according to status of renal damage as acute kidney injury (N = 49) or non-acute kidney injury (N = 77). It was found that patients with acute kidney injury suffered severer complications such as respiratory failure (P = 0.002), myocardial injury (P = 0.049), hepatic injury (P < 0.001), rhabdomyolysis (P = 0.045) and out-of-hospital cardiac arrest (P = 0.028) than patients without acute kidney injury. Moreover, patients with acute kidney injury suffered longer hospitalization duration (16.9 ± 18.3 versus 10.7 ± 10.9, P = 0.002) and had higher mortality rate (8.2% versus 0%, P = 0.011) than patients without injury. In a multivariate Cox regression model, it was demonstrated that serum creatinine level (P = 0.019) and heart rate (P = 0.022) were significant risk factors for mortality. Finally, Kaplan-Meier analysis revealed that patients with acute kidney injury suffered lower cumulative survival than without injury (P = 0.016). In summary, the overall mortality rate of charcoal burning suicide population was 3.2%, and acute kidney injury was a powerful predictor of mortality. Further studies are warranted. PMID:27430168

  11. DOE HEPA filter test program

    SciTech Connect

    1998-05-01

    This standard establishes essential elements of a Department of Energy (DOE) program for testing HEPA filters to be installed in DOE nuclear facilities or used in DOE-contracted activities. A key element is the testing of HEPA filters for performance at a DOE Filter Test Facility (FTF) prior to installation. Other key elements are (1) providing for a DOE HEPA filter procurement program, and (2) verifying that HEPA filters to be installed in nuclear facilities appear on a Qualified Products List (QPL).

  12. Adaptive filters for monitoring localized brain activity from surface potential time series

    SciTech Connect

    Spencer, M.E. |; Leahy, R.M.; Mosher, J.C. |; Lewis, P.S.

    1992-12-01

    We address the problem of processing electroencephalographic (EEG) data to monitor the time series of the components of a current dipole source vector at a given location in the head. This is the spatial filtering problem for vector sources in a lossy, three dimensional, zero delay medium. Dipolar and distributed sources at other than the desired location are canceled or attenuated with an adaptive linearly constrained minimum variance (LCMV) beamformer. Actual EEG data acquired from a human subject serves as the interference in a case where the desired source is simulated and superimposed on the actual data. It is shown that the LCMV beamformer extracts the desired dipole time series while effectively canceling the subjects interference.

  13. Adaptive filters for monitoring localized brain activity from surface potential time series

    SciTech Connect

    Spencer, M.E. . Signal and Image Processing Inst. TRW, Inc., Redondo Beach, CA ); Leahy, R.M. . Signal and Image Processing Inst.); Mosher, J.C. . Signal and Image Processing Inst. Lo

    1992-01-01

    We address the problem of processing electroencephalographic (EEG) data to monitor the time series of the components of a current dipole source vector at a given location in the head. This is the spatial filtering problem for vector sources in a lossy, three dimensional, zero delay medium. Dipolar and distributed sources at other than the desired location are canceled or attenuated with an adaptive linearly constrained minimum variance (LCMV) beamformer. Actual EEG data acquired from a human subject serves as the interference in a case where the desired source is simulated and superimposed on the actual data. It is shown that the LCMV beamformer extracts the desired dipole time series while effectively canceling the subjects interference.

  14. Planar active organic waveguide and wavelength filter: self-assembled meso-tetratolylporphyrin hexagonal nanosheet.

    PubMed

    Chandrasekhar, Naisa; Basak, Supratim; Mohiddon, Mahamad Ahamad; Chandrasekar, Rajadurai

    2014-02-12

    We have fabricated nearly monodispersed nanocrystalline sheet waveguides from a well-known red emitting meso-tetratolylporphyrin molecule (1) by following a bottom-up solvent assisted self-assembly technique. The nano-sheets thickness is in the range of 110-180 nm. Localized laser illumination showed excitation position dependent exciton polariton (653 and 719 nm) propagation behavior of the sheets. The spatially resolved fluorescence spectra of the sheets showed optical modes at the input and output points, indicating cavity effect. Additionally, because of the reabsorption of the 653 nm emission, the nanosheets also act as wave length filter by cutting off the 653 nm photons from reaching the output end. PMID:24405189

  15. Active Q-switching of a fiber laser using a modulated fiber Fabry-Perot filter and a fiber Bragg grating

    NASA Astrophysics Data System (ADS)

    Martínez Manuel, Rodolfo; Kaboko, J. J. M.; Shlyagin, M. G.

    2016-02-01

    We propose and demonstrate a simple and robust actively Q-switched erbium-doped fiber ring cavity laser. The Q-switching is based on dynamic spectral overlapping of two filters, namely a fiber Bragg grating-based filter and a fiber Fabry-Perot tunable filter. Using 3.5 m of erbium-doped fiber and a pump power of only 60 mW, Q-switched pulses with a peak power of 9.7 W and a pulse duration of 500 ns were obtained. A pulse repetition rate can be continuously varied from a single shot to a few KHz.

  16. Detection of hidden pre-industrial charcoal kilns by high-resolution LIDAR

    NASA Astrophysics Data System (ADS)

    Raab, Thomas; Raab, Alexandra; Nicolay, Alexander; Takla, Melanie; Rösler, Horst; Bönisch, Eberhard

    2013-04-01

    Over the last decade, systematic archaeological excavations in the open-cast mine Jänschwalde (Brandenburg, Germany) have revealed one of the largest, archaeologically excavated pre-industrial charcoal production area in Central Europe. Many of the charcoal kiln relics are easy to detect by survey as they lie close to the surface and charcoal pieces hint on their existence. In the excavations the remains of the charcoal kilns are distinct, black circles in the light-coloured sands. To date, in the former Königlich-Taubendorfer Forst c. 800 remains of charcoal hearths have been excavated and documented by archaeologists in an area of about 20 km2. Further c. 300 charcoal hearths are prospected by survey. Unfortunately, the spatial information about the charcoal kiln sites in Lower Lusatia (and elsewhere) is incomplete since we only have data from the archaeological excavation and prospection in the directly affected mining district. To fill this gap, we decided to test the applicability of Airborne Laser Scanning (ALS) data for charcoal kiln prospection. The particularly improved quality of the recent high-resolution light detection and ranging (LIDAR) data enabled the computer-aided detection of charcoal kilns and their evaluation using a geographical information system (GIS). Following data processing, the charcoal kilns are visible as buttons-like shapes in the shaded-relief maps (SRM). The characteristic shapes arise because the kiln plates are some centimetres to decimetres higher than the ditches around them. Numerous ground checks confirmed the applicability of the prospection by ALS data. But, we also assume that c. 10% of the charcoal kilns remain unidentified. A 26.6 km2 study area in the Tauerscher Forst, a forest about 10 km northwest of the open-cast mine Jänschwalde, was selected for prospection using a 1 m resolution ALS data set from the year 2011. Today, the area is forested with pine, and no archaeological excavation has been carried out so far

  17. A synthesis of parameters related to the binding of neutral organic compounds to charcoal.

    PubMed

    Hale, Sarah E; Arp, Hans Peter H; Kupryianchyk, Darya; Cornelissen, Gerard

    2016-02-01

    The sorption strength of neutral organic compounds to charcoal, also called biochar was reviewed and related to charcoal and compound properties. From 29 studies, 507 individual Freundlich sorption coefficients were compiled that covered the sorption strength of 107 organic contaminants. These sorption coefficients were converted into charcoal-water distribution coefficients (K(D)) at aqueous concentrations of 1 ng/L, 1 µg/L and 1 mg/L. Reported log K(D) values at 1 µg/L varied from 0.38 to 8.25 across all data. Variation was also observed within the compound classes; pesticides, herbicides and insecticides, PAHs, phthalates, halogenated organics, small organics, alcohols and PCBs. Five commonly reported variables; charcoal production temperature T, surface area SA, H/C and O/C ratios and organic compound octanol-water partitioning coefficient, were correlated with KD values using single and multiple-parameter linear regressions. The sorption strength of organic compounds to charcoals increased with increasing charcoal production temperature T, charcoal SA and organic pollutant octanol-water partitioning coefficient and decreased with increasing charcoal O/C ratio and charcoal H/C ratio. T was found to be correlated with SA (r(2) = 0.66) and O/C (r(2) = 0.50), particularly for charcoals produced from wood feedstocks (r(2) = 0.73 and 0.80, respectively). The resulting regression: log K(D)=(0.18 ± 0.06) log K(ow) + (5.74 ± 1.40) log T + (0.85 ± 0.15) log SA + (1.60 ± 0.29) log OC + (-0.89 ± 0.20) log HC + (-13.20 ± 3.69), r(2) = 0.60, root mean squared error = 0.95, n = 151 was obtained for all variables. This information can be used as an initial screening to identify charcoals for contaminated soil and sediment remediation. PMID:26347927

  18. Water Filters

    NASA Technical Reports Server (NTRS)

    1993-01-01

    The Aquaspace H2OME Guardian Water Filter, available through Western Water International, Inc., reduces lead in water supplies. The filter is mounted on the faucet and the filter cartridge is placed in the "dead space" between sink and wall. This filter is one of several new filtration devices using the Aquaspace compound filter media, which combines company developed and NASA technology. Aquaspace filters are used in industrial, commercial, residential, and recreational environments as well as by developing nations where water is highly contaminated.

  19. Impact of titanium dioxide nanoparticles on the bacterial communities of biological activated carbon filter intended for drinking water treatment.

    PubMed

    Zhiyuan, Liu; Shuili, Yu; Heedeung, Park; Qingbin, Yuan; Guicai, Liu; Qi, Li

    2016-08-01

    Titanium dioxide nanoparticles (TiO2 NPs) are inevitably present in the aquatic environment owing to their increasing production and use. However, knowledge of the potential effects of TiO2 NPs on the treatment of drinking water is scarce. Herein, the effects of two types of anatase TiO2 NPs (TP1, 25 nm; TP2, 100 nm) on the bacterial community in a biological activated carbon (BAC) filter were investigated via quantitative polymerase chain reaction (Q-PCR) analysis, ATP quantification, and 454 pyrosequencing analysis. Both TP1 and TP2 significantly inhibited the bacterial ATP level (p < 0.01) and induced a decrease in the abundance of bacterial 16S rDNA gene copies at doses of 0.1 and 100 mg L(-1). Simultaneously, the diversity and evenness of the bacterial communities were considerably reduced. The relative abundances of bacteria annotated to OTUs from Nitrospira class and Betaproteobacteria class decreased upon TiO2 NP treatment, whereas those of Bacilli class and Gammaproteobacteria class increased. TiO2 NP size showed a greater effect on the bacterial composition than did the dose based on Bray-Curtis distances. These findings identified negative effects of TiO2 NPs on the bacterial community in the BAC filter. Given the fact that BAC filters are used widely in drinking water treatment plants, these results suggested a potential threat by TiO2 NP to drinking water treatment system. PMID:27126871

  20. Enhancement of nuclease P1 production by Penicillium citrinum YL104 immobilized on activated carbon filter sponge.

    PubMed

    Zhao, Nan; Ren, Hengfei; Li, Zhenjian; Zhao, Ting; Shi, Xinchi; Cheng, Hao; Zhuang, Wei; Chen, Yong; Ying, Hanjie

    2015-02-01

    The efficiency of current methods for industrial production of the enzyme nuclease P1 is limited. In this study, we sought to improve fermentation methods for the production of nuclease P1. An immobilized fermentation system using an activated carbon filter sponge as a carrier was used for the production of nuclease P1. In an airlift internal loop reactor (ALR), the fermentation performance of three different fermentation modes, including free-cell fermentation, repeated-batch fermentation, and semi-continuous immobilized fermentation, were compared. The fermentation kinetics in the fermentation broth of the three fermentation modes, including dissolved oxygen (DO), pH value, cell concentration, residual sugar concentration, and enzyme activity, were tested. The productivity of semi-continuous immobilized fermentation reached 8.76 U/mL/h, which was 33.3 and 80.2% higher than that of repeated-batch fermentation and free-cell fermentation, respectively. The sugar consumption of free-cell, repeated-batch, and semi-continuous immobilized fermentations was 41.2, 30.8, and 25.9 g/L, respectively. These results showed that immobilized-cell fermentation by using Penicillium citrinum with activated carbon filter sponge in an ALR was advantageous for nuclease P1 production, especially in the semi-continuous immobilized fermentation mode. In spite of the significant improvement in nuclease P1 production in semi-continuous immobilized fermentation mode, the specific activity of nuclease P1 was almost equal among the three fermentation modes. PMID:25472432

  1. A MEMBRANE FILTER PROCEDURE FOR ASSAYING CYTOTOXIC ACTIVITY IN HETEROTROPHIC BACTERIA ISOLATED FROM DRINKING WATER

    EPA Science Inventory

    Cytotoxic activity assays of Gram-negative, heterotrophic bacteria are often laborious and time consuming. The objective of this study was to develop in situ procedures for testing potential cytotoxic activities of heterotrophic bacteria isolated from drinking water systems. Wate...

  2. Concentrations and bioaccessibilities of trace elements in barbecue charcoals.

    PubMed

    Sharp, Annabel; Turner, Andrew

    2013-11-15

    Total and bioaccessible concentrations of trace elements (Al, As, Cd, Cu, Fe, Hg, Mn, Ni, Pb and Zn) have been measured in charcoals from 15 barbecue products available from UK retailers. Total concentrations (available to boiling aqua regia) were greater in briquetted products (with mean concentrations ranging from 0.16 μg g(-1) for Cd to 3240 μg g(-1) for Al) than in lumpwoods (0.007 μg g(-1) for Cd to 28 μg g(-1) for Fe), presumably because of the use of additives and secondary constituents (e.g. coal) in the former. On ashing, and with the exception of Hg, elemental concentrations increased by factors ranging from about 1.5 to 50, an effect attributed to the combustion of organic components and offset to varying extents by the different volatilities of the elements. Concentrations in the ashed products that were bioaccessible, or available to a physiologically based extraction test (PBET) that simulates, successively, the chemical conditions in the human stomach and intestine, exhibited considerable variation among the elements studied. Overall, however, bioaccessible concentrations relative to corresponding total concentrations were greatest for As, Cu and Ni (attaining 100% in either or both simulated PBET phases in some cases) and lowest for Pb (generally <1% in both phases). A comparison of bioaccessible concentrations in ashed charcoals with estimates of daily dietary intake suggest that Al and As are the trace elements of greatest concern to human health from barbecuing. PMID:24140519

  3. Validation of the diffusion-barrier charcoal canister method

    SciTech Connect

    Martz, D.E.; George, J.L.; Mamich, S.T.; Langner, G.H. Jr.

    1989-05-01

    A six-month study was conducted by the Technical Measurements Center, US Department of Energy Grand Junction Projects Office, to evaluate the accuracy and reliability of indoor radon measurements using an intermittent diffusion-barrier charcoal canister sampling protocol. Diffusion-barrier charcoal canisters (DBCC) were exposed for seven days in sixteen occupied residences each week during the 26-week study. The radon concentrations measured by the DBCCs were compared to radon concentrations measured by triplicate sets of four different types of alpha-track monitors and integrated hourly radon concentrations measured by a Pylon Model AB-5 continuous radon monitor. The results were also compared with radon-daughter concentrations measured in these same residences by an Eberline WLM-1 working level monitor. Excellent agreement was observed between the integrated mean radon concentrations measured by the DBCCs compared with the six-month alpha-track results, and between the weekly DBCC readings and average weekly radon concentrations measured by the Pylon radon monitors. An intermittent sampling protocol employing six weekly DBCC measurements spaced approximately every two months throughout the year should provide estimates of the average annual indoor radon concentrations that meet the criteria established for the Grand Junction Remedial Action Program. 9 refs., 17 figs., 9 tabs.

  4. Biological Filters.

    ERIC Educational Resources Information Center

    Klemetson, S. L.

    1978-01-01

    Presents the 1978 literature review of wastewater treatment. The review is concerned with biological filters, and it covers: (1) trickling filters; (2) rotating biological contractors; and (3) miscellaneous reactors. A list of 14 references is also presented. (HM)

  5. A multi-resolution filtered-x LMS algorithm based on discrete wavelet transform for active noise control

    NASA Astrophysics Data System (ADS)

    Qiu, Z.; Lee, C.-M.; Xu, Z. H.; Sui, L. N.

    2016-01-01

    We have developed a new active control algorithm based on discrete wavelet transform (DWT) for both stationary and non-stationary noise control. First, the Mallat pyramidal algorithm is introduced to implement the DWT, which can decompose the reference signal into several sub-bands with multi-resolution and provides a perfect reconstruction (PR) procedure. To reduce the extra computational complexity introduced by DWT, an efficient strategy is proposed that updates the adaptive filter coefficients in the frequency domainDeepthi B.B using a fast Fourier transform (FFT). Based on the reference noise source, a 'Haar' wavelet is employed and by decomposing the noise signal into two sub-band (3-band), the proposed DWT-FFT-based FXLMS (DWT-FFT-FXLMS) algorithm has greatly reduced complexity and a better convergence performance compared to a time domain filtered-x least mean square (TD-FXLMS) algorithm. As a result of the outstanding time-frequency characteristics of wavelet analysis, the proposed DWT-FFT-FXLMS algorithm can effectively cancel both stationary and non-stationary noise, whereas the frequency domain FXLMS (FD-FXLMS) algorithm cannot approach this point.

  6. Spatial analysis of charcoal kiln remains in the former royal forest district Tauer (Lower Lusatia, North German Lowlands)

    NASA Astrophysics Data System (ADS)

    Raab, Alexandra; Schneider, Anna; Bonhage, Alexander; Takla, Melanie; Hirsch, Florian; Müller, Frank; Rösler, Horst; Heußner, Karl-Uwe

    2016-04-01

    Archaeological excavations have revealed more than thousand charcoal kiln remains (CKRs) in the prefield of the active opencast lignite mine Jänschwalde, situated about 150 km SE of Berlin (SE Brandenburg, Germany). The charcoal was mainly produced for the ironwork Peitz nearby, which operated from the 16th to the mid-19th centuries. In a first approach, to estimate the dimension of the charcoal production, CKRs were mapped on shaded-relief maps (SRMs) derived from high-resolution LiDAR data (Raab et al. 2015). Subsequently, for a selected test area, identified CKRs on the SRMs were compared with archaeologically excavated CKRs in the field. This survey showed a considerably number of falsely detected sites. Therefore, the data was critically re-evaluated using additional relief visualisations. Further, we extended the CKR mapping to areas which are not archaeologically investigated. The study area, the former royal forest district Tauer, consists of two separate areas: the Tauersche Heide (c. 96 km2 area) N of Peitz and the area Jänschwalde (c. 32 km2 area) NE of Peitz. The study area is characterized by a flat topography. Different former and current anthropogenic uses (e.g., military training, solar power plant, forestry measures) have affected the study area, resulting in extensive disturbances of the terrain surface. The revised CKR abundance in the study area Jänschwalde was considerably smaller than the numbers produced by our first approach. Further, the CKR mapping revealed, that a total record of the CKRs is not possible for various reasons. Despite these limitations, a solid database can be provided for a much larger area than before. Basic statistic parameters of the CKR diameters and all comparative statistical tests were calculated using SPSS. To detect underlying spatial relationships in the CKR site distribution, we applied the Getis-Ord Gi* statistic, a method to test for local spatial autocorrelation between neighbouring sites. The test is

  7. Effect of charcoal amendment on adsorption, leaching and degradation of isoproturon in soils

    NASA Astrophysics Data System (ADS)

    Si, Youbin; Wang, Midao; Tian, Chao; Zhou, Jing; Zhou, Dongmei

    2011-04-01

    The effects of charcoal amendment on adsorption, leaching and degradation of the herbicide isoproturon in soils were studied under laboratory conditions. The adsorption data all fitted well with the Freundlich empirical equation. It was found that the adsorption of isoproturon in soils increased with the rate of charcoal amended (correlation coefficient r = 0.957 **, P < 0.01). The amount of isoproturon in leachate decreased with the increase of the amount of charcoal addition to soil column, while the retention of isoproturon in soils increased with an increase in the charcoal content of soil samples. Biodegradation was still the most significant mechanism for isoproturon dissipation from soil. Charcoal amendment greatly reduced the biodegradation of isoproturon in soils. The half-lives of isoproturon degradation ( DT50) in soils greatly extended when the rate of added charcoal inceased from 0 to 50 g kg - 1 (for Paddy soil, DT50 values increased from 54.6 to 71.4 days; for Alfisol, DT50 from 16.0 to 136 days; and for Vertisol, DT50 from 15.2 to 107 days). The degradation rate of isoproturon in soils was significantly negatively correlated with the amount of added charcoal. This research suggests that charcoal amendment may be an effective management practice for reducing pesticide leaching and enhancing its persistence in soils.

  8. Soybean Seed Composition in Cultivars Differing in Resistance to Charcoal Rot (Macrophomina phaseolina)

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Soybean [Glycine max (L) Merr.] cultivars of maturity group (MG) IV were selected based on their susceptibility to charcoal rot disease caused by a soilborne fungus (Macrophomina phaseolina). Seed composition and nitrogen fixation in soybean has not been well investigated under charcoal rot infestat...

  9. Digital image processing applications in the ignition and combustion of char/coal particles

    SciTech Connect

    Annamalai, K.; Kharbat, E.; Goplakrishnan, C.

    1992-12-01

    Digital image processing, is employed in this remarch study in order to visually investigate the ignition and combustion characteristics of isolated char/coal particles as well as the effect of interactivecombustion in two-particle char/coal arrays. Preliminary experiments are conducted on miniature isolated candles as well as two-candle arrays.

  10. Carbon sequestration and fertility after centennial time scale incorporation of charcoal into soil.

    PubMed

    Criscuoli, Irene; Alberti, Giorgio; Baronti, Silvia; Favilli, Filippo; Martinez, Cristina; Calzolari, Costanza; Pusceddu, Emanuela; Rumpel, Cornelia; Viola, Roberto; Miglietta, Franco

    2014-01-01

    The addition of pyrogenic carbon (C) in the soil is considered a potential strategy to achieve direct C sequestration and potential reduction of non-CO2 greenhouse gas emissions. In this paper, we investigated the long term effects of charcoal addition on C sequestration and soil physico-chemical properties by studying a series of abandoned charcoal hearths in the Eastern Alps of Italy established in the XIX century. This natural setting can be seen as an analogue of a deliberate experiment with replications. Carbon sequestration was assessed indirectly by comparing the amount of pyrogenic C present in the hearths (23.3±4.7 kg C m(-2)) with the estimated amount of charcoal that was left on the soil after the carbonization (29.3±5.1 kg C m(-2)). After taking into account uncertainty associated with parameters' estimation, we were able to conclude that 80±21% of the C originally added to the soil via charcoal can still be found there and that charcoal has an overall Mean Residence Time of 650±139 years, thus supporting the view that charcoal incorporation is an effective way to sequester atmospheric CO2. We also observed an overall change in the physical properties (hydrophobicity and bulk density) of charcoal hearth soils and an accumulation of nutrients compared to the adjacent soil without charcoal. We caution, however, that our site-specific results should not be generalized without further study. PMID:24614647

  11. Rapid spread of suicide by charcoal burning from 2007 to 2011 in Korea.

    PubMed

    Lee, Ah-Rong; Ahn, Myung Hee; Lee, Tae Yeop; Park, Subin; Hong, Jin Pyo

    2014-11-30

    Despite rapid increase of suicide by charcoal burning within 5 years, little is known about the characteristics of charcoal burning suicide in Korea. This study aimed to examine the trends and risk factors in the spread of suicide using this method. We identified an association between media reporting of suicide by charcoal burning and its incidence. Data on suicide from 2007 to 2011 were obtained from the Korean National Statistical Office. Cross-correlation analysis was used. Increasing incidence of suicide by charcoal burning was correlated with higher education levels, male sex, and the latter half of the year. Victims of charcoal burning suicide were more likely to be young, male, single, highly educated, professional, urban-based, and to die between October and December. Internet reports of suicide via charcoal burning tended to precede the increased incidence of suicide using this method, but only during the early period of the suicide epidemic. Our findings suggest that one episode of heavy media coverage of a novel method, such as charcoal burning, is sufficient to increase the prevalence of suicide by that method even after media coverage decreases. These findings are expected to contribute to the prevention of increasing rates of suicide by charcoal burning. PMID:25048757

  12. Water adsorption on charcoal: New approach in experimental studies and data representation

    SciTech Connect

    Geynisman, M.; Walker, R.

    1991-08-01

    The experimental apparatus was built to study the H{sub 2}O adsorption on charcoal at very low concentrations and collect the data in the form of isosteres. Experimental method is discussed and the global three-dimensional fit is constructed to predict the post-regeneration conditions of charcoal absorbers. 11 refs.

  13. ESTIMATION OF EMISSIONS FROM CHARCOAL LIGHTER FLUID AND REVIEW OF ALTERNATIVES

    EPA Science Inventory

    The report gives results of an evaluation of emissions of volatile organic compounds (VOCs) from charcoal lighter fluid, a consumer product consisting entirely of volatile constituents. An estimated 46,250 tons (42,000 Mg) of charcoal lighter fluid is used in the U.S. each year. ...

  14. Potassium and phosphorus effects on disease severity of charcoal rot of soybean

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The effects of potassium (K) and phosphorus (P) fertilizers on charcoal rot of soybean [Glycine max (L.) Merr.] are unknown. Therefore, the severity of charcoal rot was studied at five levels of K (0, 37, 75, 111 and 149 kg K ha-1) and a level that was equal to the recommended fertilizer applicatio...

  15. Potassium and Phosphorus effects on disease severity of charcoal rot of soybean

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The effects of potassium (K) and phosphorus (P) fertilizers on charcoal rot of soybean [Glycine max (L.) Merr.] are unknown. Therefore, the severity of charcoal rot was studied at five levels of K (0, 37, 75, 111 and 149 kg K ha-1) and a level that was equal to the recommended fertilizer applicatio...

  16. Effects of directed fungicides sprays and potash form on charcoal rot of soybeans

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Evaluation of fungicides to control charcoal rot of soybean was conducted in a field planted annually to soybean or snap bean since 2002 with moderate to high seedling disease losses to charcoal rot. Treatments were applied on 18 Jul at 60 psi and on 7 Aug at 80 psi using a high-pressure hydraulic ...

  17. Carbon Sequestration and Fertility after Centennial Time Scale Incorporation of Charcoal into Soil

    PubMed Central

    Criscuoli, Irene; Alberti, Giorgio; Baronti, Silvia; Favilli, Filippo; Martinez, Cristina; Calzolari, Costanza; Pusceddu, Emanuela; Rumpel, Cornelia; Viola, Roberto; Miglietta, Franco

    2014-01-01

    The addition of pyrogenic carbon (C) in the soil is considered a potential strategy to achieve direct C sequestration and potential reduction of non-CO2 greenhouse gas emissions. In this paper, we investigated the long term effects of charcoal addition on C sequestration and soil physico-chemical properties by studying a series of abandoned charcoal hearths in the Eastern Alps of Italy established in the XIX century. This natural setting can be seen as an analogue of a deliberate experiment with replications. Carbon sequestration was assessed indirectly by comparing the amount of pyrogenic C present in the hearths (23.3±4.7 kg C m−2) with the estimated amount of charcoal that was left on the soil after the carbonization (29.3±5.1 kg C m−2). After taking into account uncertainty associated with parameters’ estimation, we were able to conclude that 80±21% of the C originally added to the soil via charcoal can still be found there and that charcoal has an overall Mean Residence Time of 650±139 years, thus supporting the view that charcoal incorporation is an effective way to sequester atmospheric CO2. We also observed an overall change in the physical properties (hydrophobicity and bulk density) of charcoal hearth soils and an accumulation of nutrients compared to the adjacent soil without charcoal. We caution, however, that our site-specific results should not be generalized without further study. PMID:24614647

  18. URINARY MUTAGENICITY IN CHARCOAL WORKERS: A CROSS-SECTIONAL STUDY IN NORTHEASTERN BRAZIL

    EPA Science Inventory

    Urinary Mutagenicity in charcoal workers: a cross-sectional study in northeastern Brazil

    Charcoal production by wood carbonization is an ancient process that has changed little since the Bronze Age. Its production in large scale is necessary to sustain some steel and pig...

  19. Metallic Filters

    NASA Technical Reports Server (NTRS)

    1985-01-01

    Filtration technology originated in a mid 1960's NASA study. The results were distributed to the filter industry, an HR Textron responded, using the study as a departure for the development of 421 Filter Media. The HR system is composed of ultrafine steel fibers metallurgically bonded and compressed so that the pore structure is locked in place. The filters are used to filter polyesters, plastics, to remove hydrocarbon streams, etc. Several major companies use the product in chemical applications, pollution control, etc.

  20. Molecular Marker Approach on Characterizing and Quantifying Charcoal in Environmental Media

    NASA Astrophysics Data System (ADS)

    Kuo, L.; Herbert, B. E.; Louchouarn, P.

    2006-12-01

    Black carbon (BC) is widely distributed in natural environments including soils, sediments, freshwater, seawater and the atmosphere. It is produced mostly from the incomplete combustion of fossil fuels and vegetation. In recent years, increasing attention has been given to BC due to its potential influence in many biogeochemical processes. In the environment, BC exists as a continuum ranging from partly charred plant materials, charcoal residues to highly condensed soot and graphite particles. The heterogeneous nature of black carbon means that BC is always operationally-defined, highlighting the need for standard methods that support data comparisons. Unlike soot and graphite that can be quantified with well-established methods, it is difficult to directly quantify charcoal in geologic media due to its chemical and physical heterogeneity. Most of the available charcoal quantification methods detect unknown fractions of the BC continuum. To specifically identify and quantify charcoal in soils and sediments, we adopted and validated an innovative molecular marker approach that quantifies levoglucosan, a pyrogenic derivative of cellulose, as a proxy of charcoal. Levoglucosan is source-specific, stable and is able to be detected at low concentrations using gas chromatograph-mass spectrometer (GC-MS). In the present study, two different plant species, honey mesquite and cordgrass, were selected as the raw materials to synthesize charcoals. The lab-synthesize charcoals were made under control conditions to eliminate the high heterogeneity often found in natural charcoals. The effects of two major combustion factors, temperature and duration, on the yield of levoglucosan were characterized in the lab-synthesize charcoals. Our results showed that significant levoglucosan production in the two types of charcoal was restricted to relatively low combustion temperatures (150-350 degree C). The combustion duration did not cause significant differences in the yield of

  1. Water Filters

    NASA Technical Reports Server (NTRS)

    1987-01-01

    A compact, lightweight electrolytic water filter generates silver ions in concentrations of 50 to 100 parts per billion in the water flow system. Silver ions serve as effective bactericide/deodorizers. Ray Ward requested and received from NASA a technical information package on the Shuttle filter, and used it as basis for his own initial development, a home use filter.

  2. FILTER TREATMENT

    DOEpatents

    Sutton, J.B.; Torrey, J.V.P.

    1958-08-26

    A process is described for reconditioning fused alumina filters which have become clogged by the accretion of bismuth phosphate in the filter pores, The method consists in contacting such filters with faming sulfuric acid, and maintaining such contact for a substantial period of time.

  3. Baking sunflower hulls within an aluminum envelope in a common laboratory oven yields charcoal

    PubMed Central

    Arnal, Pablo Maximiliano

    2015-01-01

    Charcoals have been widely used by scientist to research the removal of contaminants from water and air. One key feature of charcoal is that it keeps macropores from the parent material – though anisotropically contracted – and can even develop meso- and micropores. However, the controlled thermochemical conversion of biomass into charcoal at laboratory scale normally requires special setups which involve either vacuum or inert gas. Those setups may not be affordable in research groups or educational institutions where the research of charcoals would be highly welcome. In this work, I propose a simple and effective method to steer the thermochemical process that converts sunflower hulls (SFH) into charcoal with basic laboratory resources. The carbonization method: • Place SFH in an airtight aluminum envelope. • Thermally treat SFH within the envelope in a common laboratory oven. • Open the envelope to obtain the carbonized sunflower hulls. PMID:26150989

  4. Baking sunflower hulls within an aluminum envelope in a common laboratory oven yields charcoal.

    PubMed

    Arnal, Pablo Maximiliano

    2015-01-01

    Charcoals have been widely used by scientist to research the removal of contaminants from water and air. One key feature of charcoal is that it keeps macropores from the parent material - though anisotropically contracted - and can even develop meso- and micropores. However, the controlled thermochemical conversion of biomass into charcoal at laboratory scale normally requires special setups which involve either vacuum or inert gas. Those setups may not be affordable in research groups or educational institutions where the research of charcoals would be highly welcome. In this work, I propose a simple and effective method to steer the thermochemical process that converts sunflower hulls (SFH) into charcoal with basic laboratory resources. The carbonization method: •Place SFH in an airtight aluminum envelope.•Thermally treat SFH within the envelope in a common laboratory oven.•Open the envelope to obtain the carbonized sunflower hulls. PMID:26150989

  5. Interactive effects of biochar ageing in soils related to feedstock, pyrolysis temperature, and historic charcoal production.

    NASA Astrophysics Data System (ADS)

    Heitkötter, Julian; Marschner, Bernd

    2015-04-01

    particles, extractable DOC was lower and less aromatic than in the adjacent control soil, likely due to strong sorption of dissolved organic matter (DOM) onto charcoal particles. We suggest that higher sorption of DOM onto the surface of biochar in the control soil provided additional acid functional groups and thus increased the surface charge to a greater extent than in the DOC poorer kiln soil. Hence, biochars incubated in the kiln soil showed less changes in CEC and surface acidity. Higher availability of DOM in the control soil could also stimulate microbial activity to a larger extent, resulting in higher oxidation rates of biochars incubated in the control soil.

  6. Active tuning of a microstrip hairpin-line microwave bandpass filter on a polycrystalline yttrium iron garnet substrate using small magnetic fields

    NASA Astrophysics Data System (ADS)

    Gillette, S. M.; Geiler, A. L.; Chen, Z.; Chen, Y.; Arruda, T.; Xie, C.; Wang, L.; Zhu, X.; Liu, M.; Mukerjee, S.; Vittoria, C.; Harris, V. G.

    2011-04-01

    Active magnetic tuning of a microstrip hairpin-line coupled resonator bandpass filter fabricated on a polycrystalline yttrium iron garnet substrate has been demonstrated. The filter exhibits a five-pole Chebyshev response with passband center frequency tunability from 8.3 to 9 GHz under low applied H fields of 50-200 Oe. The instantaneous bandwidth was measured to be approximately 1 GHz. During tuning, passband center frequency insertion loss varies between 1 and 1.4 dB. Good agreement between simulated and measured device performance was demonstrated. Advantages of the proposed filter design include planar geometry, compact size, low insertion loss, and low field tunability. The proposed design approach lends itself to the implementation of a wide range of filter responses, including low pass, high pass, bandpass, and band stop, as well as passband characteristics, including center frequency, fractional bandwidth, passband ripple, out-of-band rejection, etc.

  7. Towards an inventory of historic charcoal production fields in Brandenburg, Germany

    NASA Astrophysics Data System (ADS)

    Schneider, Anna; Takla, Melanie; Raab, Alexandra; Raab, Thomas; Bonhage, Alexander; Hirsch, Florian; Rösler, Horst

    2015-04-01

    The historic production of charcoal is an important component of the late Holocene fire history for many landscapes. Charcoal production can have numerous effects on ecosystems, e.g., through changes in forest area and structure, or through the effects of pyrolysis, charcoal and ash addition to soils. To assess such effects, it is necessary to understand the spatial extent and patterns of historic charcoal production, which has so far hardly been approached for the Northern European Lowlands. In the forefield of the open-cast mine Jänschwalde (north of Cottbus, Germany), archaeological excavations have revealed one of the largest charcoal production fields described so far. For this area, we applied and evaluated different methods for mapping the spatial distribution of charcoal kiln remains. Based on our results from this exceptionally well-described charcoal production field, we attempted to detect and map other large occurrences of charcoal kiln remains in the state of Brandenburg. For the mine forefield, archaeological excavations provide certain and exact information on kiln site location and geometry. Using airborne laser scanning elevation models, the mapping of kiln sites could be extended to areas beyond the mine forefield, using a manual digitization for thorough mapping in forest areas north of Cottbus, and an automated mapping approach for detection of kiln sites for additional areas in Brandenburg. Potential areas of large-scale production were identified in a GIS-based analysis of environmental and historic data. By manual digitization from Shaded Relief Maps, more than 5000 kiln sites in an area of 32 km2 were detected in the Jänschwalde mine forefield. First results of mapping for larger areas indicate similar densities, but smaller diameters of kiln sites in other charcoal production fields; and show that charcoal production is a so far underestimated component of the land use history in many parts of the Northern European Lowlands.

  8. Towards an improvement of carbon accounting for wildfires: incorporation of charcoal production into carbon emission models

    NASA Astrophysics Data System (ADS)

    Doerr, Stefan H.; Santin, Cristina; de Groot, Bill

    2015-04-01

    Every year fires release to the atmosphere the equivalent to 20-30% of the carbon (C) emissions from fossil fuel consumption, with future emissions from wildfires expected to increase under a warming climate. Critically, however, part of the biomass C affected by fire is not emitted during burning, but converted into charcoal, which is very resistant to environmental degradation and, thus, contributes to long-term C sequestration. The magnitude of charcoal production from wildfires as a long-term C sink remains essentially unknown and, to the date, charcoal production has not been included in wildfire emission and C budget models. Here we present complete inventories of charcoal production in two fuel-rich, but otherwise very different ecosystems: i) a boreal conifer forest (experimental stand-replacing crown fire; Canada, 2012) and a dry eucalyptus forest (high-intensity fuel reduction burn; Australia 2014). Our data show that, when considering all the fuel components and quantifying all the charcoal produced from each (i.e. bark, dead wood debris, fine fuels), the overall amount of charcoal produced is significant: up to a third of the biomass C affected by fire. These findings indicate that charcoal production from wildfires could represent a major and currently unaccounted error in the estimation of the effects of wildfires in the global C balance. We suggest an initial approach to include charcoal production in C emission models, by using our case study of a boreal forest fire and the Canadian Fire Effects Model (CanFIRE). We also provide recommendations of how a 'conversion factor' for charcoal production could be relatively easily estimated when emission factors for different types of fuels and fire conditions are experimentally obtained. Ultimately, this presentation is a call for integrative collaboration between the fire emission modelling community and the charcoal community to work together towards the improvement of C accounting for wildfires.

  9. Segmentation of follicular regions on H&E slides using a matching filter and active contour model

    NASA Astrophysics Data System (ADS)

    Belkacem-Boussaid, Kamel; Prescott, Jeffrey; Lozanski, Gerard; Gurcan, Metin N.

    2010-03-01

    Follicular Lymphoma (FL) accounts for 20-25% of non-Hodgkin lymphomas in the United States. The first step in follicular lymphoma grading is the identification of follicles. The goal of this paper is to develop a technique to segment follicular regions in H&E stained images. The method is based on a robust active contour model, which is initialized by a seed point selected inside the follicle manually by the user. The novel aspect of this method is the introduction of a matched filter for the flattening of background in the L channel of the Lab color space. The performance of the algorithm was tested by comparing it against the manual segmentations of trained readers using the Zijbendos similarity index. The mean accuracy of the final segmentation compared to the manual ground truth was 0.71 with a standard deviation of 0.12.

  10. An intersubunit salt bridge near the selectivity filter stabilizes the active state of Kir1.1.

    PubMed

    Sackin, Henry; Nanazashvili, Mikheil; Li, Hui; Palmer, Lawrence G; Walters, D Eric

    2009-08-19

    ROMK (Kir1.1) potassium channels are closed by internal acidification with a pKa of 6.7 +/- 0.01 in 100 mM external K and a pKa of 7.0 +/- 0.01 in 1 mM external K. Internal acidification in 1 mM K (but not 100 mM K) not only closed the pH gate but also inactivated Kir1.1, such that realkalization did not restore channel activity until high K was returned to the bath. We identified a new putative intersubunit salt bridge (R128-E132-Kir1.1b) in the P-loop of the channel near the selectivity filter that affected the K sensitivity of the inactivation process. Mutation of either R128-Kir1.1b or E132-Kir1.1b caused inactivation in both 1 mM and 100 mM external K during oocyte acidification. However, 300 mM external K (but not 200 mM Na + 100 mM K) protected both E132Q and R128Y from inactivation. External application of a modified honey-bee toxin, tertiapin Q (TPNQ), also protected Kir1.1 from inactivation in 1 mM K and protected E132Q and R128Y from inactivation in 100 mM K, which suggests that TPNQ binding to the outer mouth of the channel stabilizes the active state. Pretreatment of Kir1.1 with external Ba prevented Kir1.1 inactivation, similar to pretreatment with TPNQ. In addition, mutations that disrupted transmembrane helix H-bonding (K61M-Kir1.1b) or stabilized a selectivity filter to helix-pore linkage (V121T-Kir1.1b) also protected both E132Q and R128Y from inactivation in 1 mM K and 100 mM K. Our results are consistent with Kir inactivation arising from conformational changes near the selectivity filter, analogous to C-type inactivation. PMID:19686653

  11. An Intersubunit Salt Bridge near the Selectivity Filter Stabilizes the Active State of Kir1.1

    PubMed Central

    Sackin, Henry; Nanazashvili, Mikheil; Li, Hui; Palmer, Lawrence G.; Walters, D. Eric

    2009-01-01

    Abstract ROMK (Kir1.1) potassium channels are closed by internal acidification with a pKa of 6.7 ± 0.01 in 100 mM external K and a pKa of 7.0 ± 0.01 in 1 mM external K. Internal acidification in 1 mM K (but not 100 mM K) not only closed the pH gate but also inactivated Kir1.1, such that realkalization did not restore channel activity until high K was returned to the bath. We identified a new putative intersubunit salt bridge (R128-E132-Kir1.1b) in the P-loop of the channel near the selectivity filter that affected the K sensitivity of the inactivation process. Mutation of either R128-Kir1.1b or E132-Kir1.1b caused inactivation in both 1 mM and 100 mM external K during oocyte acidification. However, 300 mM external K (but not 200 mM Na + 100 mM K) protected both E132Q and R128Y from inactivation. External application of a modified honey-bee toxin, tertiapin Q (TPNQ), also protected Kir1.1 from inactivation in 1 mM K and protected E132Q and R128Y from inactivation in 100 mM K, which suggests that TPNQ binding to the outer mouth of the channel stabilizes the active state. Pretreatment of Kir1.1 with external Ba prevented Kir1.1 inactivation, similar to pretreatment with TPNQ. In addition, mutations that disrupted transmembrane helix H-bonding (K61M-Kir1.1b) or stabilized a selectivity filter to helix-pore linkage (V121T-Kir1.1b) also protected both E132Q and R128Y from inactivation in 1 mM K and 100 mM K. Our results are consistent with Kir inactivation arising from conformational changes near the selectivity filter, analogous to C-type inactivation. PMID:19686653

  12. Characterization of the airborne activity confinement system prefilter material

    SciTech Connect

    Long, T.A.; Monson, P.R.

    1992-05-01

    A general concern with assessing the effects of postulated severe accidents is predicting and preventing the release of radioactive isotopes to the environment at the Savannah River Site (SRS) reactor. Unless the confinement systems are breached in an accident the Airborne Activity Confinement System forces all of the internal air through the filter compartments. Proper modeling of the radioactivity released to the environment requires knowledge of the filtering characteristics of the demisters, the HEPA`s, and the charcoal beds. An investigation of the mass loading characteristics for a range of particle sizes was performed under the direction of Vince Novick of Argonne National Laboratory (ANL) for the Savannah River Technology Center (SRTC) in connection with the restart of the K reactor. Both solid and liquid aerosols were used to challenge sample prefilter and HEPA filters. The results of the ANL investigation are reported in this document.

  13. Characterization of the airborne activity confinement system prefilter material

    SciTech Connect

    Long, T.A.; Monson, P.R.

    1992-05-01

    A general concern with assessing the effects of postulated severe accidents is predicting and preventing the release of radioactive isotopes to the environment at the Savannah River Site (SRS) reactor. Unless the confinement systems are breached in an accident the Airborne Activity Confinement System forces all of the internal air through the filter compartments. Proper modeling of the radioactivity released to the environment requires knowledge of the filtering characteristics of the demisters, the HEPA's, and the charcoal beds. An investigation of the mass loading characteristics for a range of particle sizes was performed under the direction of Vince Novick of Argonne National Laboratory (ANL) for the Savannah River Technology Center (SRTC) in connection with the restart of the K reactor. Both solid and liquid aerosols were used to challenge sample prefilter and HEPA filters. The results of the ANL investigation are reported in this document.

  14. Sorption and degradation of petroleum hydrocarbons, polycyclic aromatic hydrocarbons, alkylphenols, bisphenol A and phthalates in landfill leachate using sand, activated carbon and peat filters.

    PubMed

    Kalmykova, Yuliya; Moona, Nashita; Strömvall, Ann-Margret; Björklund, Karin

    2014-06-01

    Landfill leachates are repeatedly found contaminated with organic pollutants, such as alkylphenols (APs), phthalates and polycyclic aromatic hydrocarbons (PAHs) at levels exceeding water quality standards. It has been shown that these pollutants may be present in the colloidal and truly dissolved phase in contaminated water, making particle separation an inefficient removal method. The aim of this study was to investigate sorption and degradation of petroleum hydrocarbons (PHCs), selected APs, bisphenol A (BPA), phthalates and PAHs from landfill leachate using sand, granulated activated carbon (GAC) and peat moss filters. A pilot plant was installed at an inactive landfill with mixed industrial and household waste and samples were collected before and after each filter during two years. Leachate pre-treated in oil separator and sedimentation pond failed to meet water quality standards in most samples and little improvement was seen after the sand filter. These techniques are based on particle removal, whereas the analysed pollutants are found, to varying degrees, bound to colloids or dissolved. However, even highly hydrophobic compounds expected to be particle-bound, such as the PHCs and high-molecular weight PAHs, were poorly removed in the sand filter. The APs and BPA were completely removed by the GAC filter, while mass balance calculations indicate that 50-80% of the investigated phenols were removed in the peat filter. Results suggest possible AP degradation in peat filters. No evidence of phthalate degradation in the landfill, pond or the filters was found. The PHCs were completely removed in 50% and 35% of the measured occasions in the GAC and peat filters, respectively. The opposite trend was seen for removal of PAHs in GAC (50%) and peat (63%). Oxygenated PAHs with high toxicity were found in the leachates but not in the pond sediment. These compounds are likely formed in the pond water, which is alarming because sedimentation ponds are commonly used

  15. Aspects of tests and assessment of filtering materials used for respiratory protection against bioaerosols. Part I: type of active substance, contact time, microorganism species.

    PubMed

    Majchrzycka, Katarzyna; Gutarowska, Beata; Brochocka, Agnieszka

    2010-01-01

    This paper presents the results of a study on antimicrobial activity of polymer filter nonwovens produced by needle-punching or melt-blowing with an addition of disinfecting agents. The first part of the paper discusses how the biocidal activity of nonwovens is a function of the active agent added to the nonwovens, the duration of the contact of microorganisms with nonwovens and the type of microorganisms. The types of fibres and disinfecting agents had a considerable effect on the biocidal activity of nonwovens. The biocidal effect of nonwovens increased with the duration of their contact with microorganisms. Fibre activity differed considerably depending on the species of the microorganism. The microorganisms most sensitive to biocidal activity of the active filter nonwoven were S. aureus, M. flavus and E. coli. There were no biocidal effects on spore-forming bacterium B. subtilis. PMID:20540844

  16. [Caring for families of charcoal-burning suicide patients].

    PubMed

    Pien, Feng-Chen; Feng, Hsin-Pei; Tzeng, Wen-Chii

    2013-12-01

    Charcoal-burning is the second major cause of suicide death in Taiwan. Predicting the variable damage and sequelae in this suicide mode is difficult due to the rapid combination of carbon monoxide with red blood cells. Delayed neuropsychological sequelae (DNS) may result in significantly extended recovery times, causing additional stress to the family. Nurses may help increase family understanding and support and guide family members to more positive intra-family interactions, shared perspectives on the recovery process, and resource seeking behavior by depicting subsequent family life and helping the entire family develop coping strategies those allow all members to effect cognitive, emotional and behavioral change. This result may help families of attempted suicide individuals recover successfully. PMID:24310557

  17. Mechanisms of charcoal degradation during its initial stages of decomposition

    NASA Astrophysics Data System (ADS)

    Singh, Nimisha; Abiven, Samuel; Schmidt, Michael W. I.

    2010-05-01

    Future climatic changes might result in an increased potential for wildfires, whereby incorporation of charred biomass into soil would increase. The incomplete combustion of biomass results in the production of a chemically heterogeneous class of highly condensed compounds known as pyrogenic C (PyC), which is generally considered resistant to microbial degradation. Recently, studies based on short-term laboratory incubations with soil have indicated that PyC can also eventually degrade (Baldock and Smernik, 2002; Hamer et al., 2004) and it is now widely accepted that a significant quantity of these resistant fraction of soil must have undergone degradation in terrestrial environments. Charcoal has been shown to decompose faster in the initial stages (first 2-3 months) and stabilize later (Kuzyakov et al., 2009). However, studies describing charcoal transformation processes remain scarce. The different potential degradation mechanisms have not yet been studied in combination, and therefore the relative importance for PyC degradation has not been evaluated. We are conducting an incubation experiment to study the biological, chemical and physical degradation/stabilization processes of PyC in soil under controlled conditions. We use Pinus ponderosa 13C/15N labeled (13C: 800 per mil, 15N: 4.2 atom %) wood and charcoal (pyrolysed at 450 °C under N2 atmosphere). We incubate soil from Lägeren forest (Wettingen, Switzerland) with three kind of organic inputs, labeled wood, char and no littler control. The decomposition rates would be estimated based on 13C of CO2 entrapped in NaOH. Time course destructive sampling would be done during the study. Lyophilized soil subsamples will be used for analysis of the amount of 13C incorporation in the microbial biomass using fumigation extraction method and phospholipids fatty acid analysis (PLFA). The remaining PyC in the soil would be characterized for the changes in its chemistry at the molecular level using Benzenepolycarboxlic

  18. Criticality safety study of the MSRE auxiliary charcoal bed

    SciTech Connect

    Hollenbach, D.F.; Hopper, C.M.

    1996-09-01

    The Molten Salt Reactor Experiment (MSRE) was operated from June 1965 to December 1969. The objective of the experiment was to investigate the practicality of developing a power reactor consisting of a graphite lattice with circulating molten uranium salt as fuel for application in central power stations. When the experiment was terminated in 1969, approximately 4710 kg of salt containing approximately 36.3 kg of uranium, 675 g of plutonium, and various fission products were transferred to two fuel drain tanks (FDTs). The almost 30.5 kg of Uranium 233 in the salt is the primary fissile constituent, but about 0.93 kg of Uranium 235 is also present. In April 1994, a gas sample from the MSRE off-gas system (OGS) indicated that uranium had migrated from the FDTs into the OGS. Further investigation revealed a likely accumulation of approximately 2.6 kg of uranium in the auxiliary charcoal bed (ACB), which is located in the concrete-lined charcoal bed cell (CBC) below ground level outside the MSRE building. The nuclear criticality safety (NCS) situation was further complicated by the CBC being filled with water up to the overflow pipe, which completely submerged the ACB. Thus there was not only an increased risk of criticality because of water reflection in the ACB, but also because of potential moderation in the ACB in case of water inleakage. Leakage into the ACB would result in a direct path for water between the CBC and the OGS or FDTs, thus increasing the risk of criticality in these areas. When uranium was discovered in the ACB, a number of steps, detailed in this report, were immediately taken to try to understand and ameliorate the situation. After all the actions were completed, a validation of the results obtained for the ACB was performed.

  19. Combining phosphate and bacteria removal on chemically active filter membranes allows prolonged storage of drinking water.

    PubMed

    Rotzetter, A C C; Kellenberger, C R; Schumacher, C M; Mora, C; Grass, R N; Loepfe, M; Luechinger, N A; Stark, W J

    2013-11-13

    A chemically active filtration membrane with incorporated lanthanum oxide nanoparticles enables the removal of bacteria and phosphate at the same time and thus provides a simple device for preparation of drinking water and subsequent safe storage without using any kind of disinfectants. PMID:23913409

  20. Bioavailable and biodegradable dissolved organic nitrogen in activated sludge and trickling filter wastewater treatment plants

    Technology Transfer Automated Retrieval System (TEKTRAN)

    A study was carried out to understand the fate of biodegradable dissolved organic nitrogen (BDON) and bioavailable dissolved organic nitrogen (ABDON) along the treatment trains of a wastewater treatment facility (WWTF) equipped with an activated sludge (AS) system and a WWTF equipped with a two-stag...

  1. Soil quality in a cropland soil treated with wood ash containing charcoal

    NASA Astrophysics Data System (ADS)

    Omil, Beatriz; Balboa, Miguel A.; Fonturbel, M. Teresa; Gartzia-Bengoetxea, Nahia; Arias-González, Ander; Vega, Jose A.; Merino, Agustin

    2014-05-01

    The strategy of the European Union "Europe 2020" states that by 2020, 20% of final energy consumption must come from renewables. In this scenario, there is an increasing use of biomass utilization for energy production. Indeed, it is expected that the production of wood-ash will increase in coming years. Wood ash, a mixture of ash and charcoal, generated as a by-product of biomass combustion in power plants, can be applied to soil to improve the soil quality and crop production. Since the residue contains significant content of charcoal, the application of mixed wood ash may also improve the SOM content and soil quality in the long term, in soils degraded as a consequence of intensive management. The objective of this study was asses the changes in SOM quality and soil properties in a degraded soils treated with wood ash containing charcoal. The study was carried out in a field devoted to cereal crops during the last decades. The soil was acidic (pH 4.5) with a low SOC content (3 %) and fine texture. The experiment was based on a randomised block design with four replicates. Each block included the following four treatments: Control, 16 Mg fly wood ash ha-1, 16 Mg mixed wood ash ha-1 (16 Mg) and 32 Mg mixed wood ash ha-1 (32 Mg). The application was carried out once. The ash used in the study was obtained from a thermal power plant and was mainly derived from the combustion of Pinus radiata bark and branches. The wood ash is highly alkaline (pH= 10), contains 10 % of highly condensed black carbon (atomic H/C ratio < 0.5 and T50 en DSC= 500 ºC). The evolution of SOM properties were monitored over three years by solid state 13C CPMAS NMR and Differential Scanning Calorimetry (DSC). These techniques were applied in bulk samples and aggregates of different sizes. The changes in microbial activity were studied by analysis of microbial biomass C and basal respiration. The soil bacterial community was studied by the Biolog method. Several physical properties, such soil

  2. Charcoal as evidence of fire regimes in the Pleistocene of the California Islands

    NASA Astrophysics Data System (ADS)

    Scott, A. C.; Hardiman, M.; Pinter, N.; Anderson, R. S.

    2012-04-01

    Charcoal has been recovered from a range of late Pleistocene sites both in Santa Cruz Island and Santa Rosa Island, belonging to the California Channel Islands. Sediments have been dated using radiocarbon measurements based on wood charcoal, fungal sclerotia, glassy carbon and fecal pellets and are given as calendar years bp. Charcoal assemblages from samples dating from 24,694 to 12,900 years are dominated by coniferous wood charcoal. Little angiosperm charcoal was recovered in any of the samples. Fungal sclerotia are frequent in a number of samples from a range of ages both on Santa Cruz and Santa Rosa. Fecal pellets are common in most samples and abundant in others. Some of the fecal pellets have hexagonal sides and are likely to represent termite frass. The sediments are fluvial in origin and the distribution of charcoal is irregular. The charcoal records a significant record of fire before the earliest documented human arrival on the islands and there is no evidence for a catstrophic fire triggered by a cometary impact at the onset of the younger Dryas, 12,900 cal years bp.

  3. Charcoal emissions as a source of CO and carcinogenic PAH in mainstream narghile waterpipe smoke.

    PubMed

    Monzer, Bassel; Sepetdjian, Elizabeth; Saliba, Najat; Shihadeh, Alan

    2008-09-01

    Burning charcoal is normally placed atop the tobacco to smoke the narghile waterpipe. We investigated the importance of charcoal as a toxicant source in the mainstream smoke, with particular attention to two well-known charcoal emissions: carbon monoxide (CO) and polyaromatic hydrocarbons (PAH). CO and PAH yields were compared when a waterpipe was machine smoked using charcoal and using an electrical heating element. The electrical heating element was designed to produce spatial and temporal temperature distributions similar to those measured using charcoal. With a popular type of ma'assel tobacco mixture, and using a smoking regimen consisting of 105 puffs of 530ml volume spaced 17s apart, it was found that approximately 90% of the CO and 75-92% of the 4- and 5-membered ring PAH compounds originated in the charcoal. Greater than 95% of the benzo(a)pyrene in the smoke was attributable to the charcoal. It was also found that the relative proportions of individual PAH species, the "PAH fingerprint", of the mainstream smoke were highly correlated to those extracted from the unburned charcoal (R(2)>0.94). In contrast, there was no correlation between the PAH fingerprint of the electrically heated and charcoal-heated conditions (R(2)<0.02). In addition to inhaling toxicants transferred from the tobacco, such as nicotine, "tar", and nitrosamines, waterpipe smokers thus also inhale large quantities of combustion-generated toxicants. This explains why, despite the generally low temperatures attained in the narghile tobacco, large quantities of CO and PAH have been found in the smoke. PMID:18573302

  4. Filtering apparatus

    DOEpatents

    Haldipur, Gaurang B.; Dilmore, William J.

    1992-01-01

    A vertical vessel having a lower inlet and an upper outlet enclosure separated by a main horizontal tube sheet. The inlet enclosure receives the flue gas from a boiler of a power system and the outlet enclosure supplies cleaned gas to the turbines. The inlet enclosure contains a plurality of particulate-removing clusters, each having a plurality of filter units. Each filter unit includes a filter clean-gas chamber defined by a plate and a perforated auxiliary tube sheet with filter tubes suspended from each tube sheet and a tube connected to each chamber for passing cleaned gas to the outlet enclosure. The clusters are suspended from the main tube sheet with their filter units extending vertically and the filter tubes passing through the tube sheet and opening in the outlet enclosure. The flue gas is circulated about the outside surfaces of the filter tubes and the particulate is absorbed in the pores of the filter tubes. Pulses to clean the filter tubes are passed through their inner holes through tubes free of bends which are aligned with the tubes that pass the clean gas.

  5. Filtering apparatus

    DOEpatents

    Haldipur, G.B.; Dilmore, W.J.

    1992-09-01

    A vertical vessel is described having a lower inlet and an upper outlet enclosure separated by a main horizontal tube sheet. The inlet enclosure receives the flue gas from a boiler of a power system and the outlet enclosure supplies cleaned gas to the turbines. The inlet enclosure contains a plurality of particulate-removing clusters, each having a plurality of filter units. Each filter unit includes a filter clean-gas chamber defined by a plate and a perforated auxiliary tube sheet with filter tubes suspended from each tube sheet and a tube connected to each chamber for passing cleaned gas to the outlet enclosure. The clusters are suspended from the main tube sheet with their filter units extending vertically and the filter tubes passing through the tube sheet and opening in the outlet enclosure. The flue gas is circulated about the outside surfaces of the filter tubes and the particulate is absorbed in the pores of the filter tubes. Pulses to clean the filter tubes are passed through their inner holes through tubes free of bends which are aligned with the tubes that pass the clean gas. 18 figs.

  6. Black carbon quantification in charcoal-enriched soils by differential scanning calorimetry

    NASA Astrophysics Data System (ADS)

    Hardy, Brieuc; Cornelis, Jean-Thomas; Leifeld, Jens

    2015-04-01

    Black carbon (BC), the solid residue of the incomplete combustion of biomass and fossil fuels, is ubiquitous in soil and sediments, fulfilling several environmental services such as long-term carbon storage. BC is a particularly important terrestrial carbon pool due to its large residence time compared to thermally unaltered organic matter, which is largely attributed to its aromatic structure. However, BC refers to a wide range of pyrogenic products from partly charred biomass to highly condensed soot, with a degree of aromaticity and aromatic condensation varying to a large extend across the BC continuum. As a result, BC quantification largely depends on operational definitions, with the extraction efficiency of each method varying across the entire BC range. In our study, we investigated the adequacy of differential scanning calorimetry (DSC) for the quantification of BC in charcoal-enriched soils collected in the topsoil of pre-industrial charcoal kilns in forest and cropland of Wallonia, Belgium, where charcoal residues are mixed to uncharred soil organic matter (SOM). We compared the results to the fraction of the total organic carbon (TOC) resisting to K2Cr2O7 oxidation, another simple method often used for BC measurement. In our soils, DSC clearly discriminates SOM from chars. SOM is less thermally stable than charcoal and shows a peak maximum around 295°C. In forest and agricultural charcoal-enriched soils, three peaks were attributed to the thermal degradation of BC at 395, 458 and 523°C and 367, 420 and 502 °C, respectively. In cropland, the amount of BC calculated from the DSC peaks is closely related (slope of the linear regression = 0.985, R²=0.914) to the extra organic carbon content measured at charcoal kiln sites relative to the charcoal-unaffected adjacent soils, which is a positive indicator of the suitability of DSC for charcoal quantification in soil. The first BC peak, which may correspond to highly degraded charcoal, contributes to a

  7. Effects of bagasse-charcoal addition to soil on nitrate leaching in calcaric soils

    NASA Astrophysics Data System (ADS)

    Kameyama, K.; Miyamoto, T.; Shinogi, Y.

    2009-12-01

    Nitrate leaching in soils is often an important aspect in agriculture. Nitrate is leached from the root zone, where plants can utilize them, by surplus rainfall because little nitrate is absorbed by soil colloids. Miyako Island (target area) is located in the subtropical zone and comprised of coral limestone with high permeability. Land surface is covered with calcaric dark red soil that is called “Shimajiri-Maji”. Since the soil has low water- and fertilizer-retaining capacity, fertilizer-derived nitrogen easily leaches from the root zone during surplus rainfall and the nitrogen utilization efficiency of crops is relatively low. Biochars, charcoal produced from pyrolysis of biomass, are known to adsorb dissolved nitrate. Sugarcane bagasse is the main biomass resource on the island because agriculture is the main industry on the island and sugarcane is cultivated in approximately 70% of the farmland. However, the adsorption characteristics of bagasse-charcoals for nitrate have not yet been clarified. The objective of this study was to evaluate the dependency of carbonization temperatures on the nitrate adsorption properties of bagasse-charcoals and the effects of bagasse-charcoal addition to the soil on NO3-N transport in the soil for optimal use of bagasse-charcoal as a soil amendment in Miyako Island. Sugarcane bagasse were air-dried and heated in a batch-type carbonization furnace at five different carbonization temperatures (400, 500, 600, 700 and 800°C) with a holding time of 2 h. Nitrate adsorption by soil and bagasse-charcoals at each carbonization temperature was measured by the batch equilibrium technique. NO3-N transport behavior in charcoal-amended soils (rates of charcoal addition: 0, 5 and 10 wt %) was evaluated in the column experiments. The breakthrough curves of NO3-N concentrations in the effluents from the bottom of the columns were analyzed with a convective-dispersion model. The model described one-dimensional transport of a sorbing solute

  8. Biofiltration of benzene contaminated air streams using compost-activated carbon filter media

    SciTech Connect

    Zhu, L.; Kocher, W.M.; Abumaizar, R.J.

    1998-12-31

    Three laboratory-scale biofilter columns were operated for 81 days to investigate the removal of benzene from a waste gas stream. The columns contain a mixture of yard waste and sludge compost as biomedia. Different amounts of granular activated carbon (GAC) are mixed with the compost in two of the three columns to evaluate the extent to which biofilter performance can be enhanced. The effects of different operating conditions on the performance of the removal of benzene from air were evaluated. More than 90% removal efficiency was observed for an influent benzene concentration of about 75 ppm and an air flow rate of 0.3 L/min. in all 3 columns under steady-state conditions. Under most cases of shock loading conditions, such as a sudden increase in the air flow rate, or the benzene concentration in the influent, the biofilters containing GAC provided higher removal efficiencies and more stable operation than the biofilter containing compost only.

  9. Modeling the parameters for plasmodesmal sugar filtering in active symplasmic phloem loaders

    PubMed Central

    Liesche, Johannes; Schulz, Alexander

    2013-01-01

    Plasmodesmata (PD) play a key role in loading of sugars into the phloem. In plant species that employ the so-called active symplasmic loading strategy, sucrose that diffuses into their unique intermediary cells (ICs) is converted into sugar oligomers. According to the prevalent hypothesis, the oligomers are too large to pass back through PD on the bundle sheath side, but can pass on into the sieve element to be transported in the phloem. Here, we investigate if the PD at the bundle sheath-IC interface can indeed fulfill the function of blocking transport of sugar oligomers while still enabling efficient diffusion of sucrose. Hindrance factors are derived via theoretical modeling for different PD substructure configurations: sub-nano channels, slit, and hydrogel. The results suggest that a strong discrimination could only be realized when the PD opening is almost as small as the sugar oligomers. In order to find model parameters that match the in vivo situation, we measured the effective diffusion coefficient across the interface in question in Cucurbita pepo with 3D-photoactivation microscopy. Calculations indicate that a PD substructure of several sub-nano channels with a radius around 7 Å, a 10.4 Å-wide slit or a hydrogel with 49% polymer fraction would be compatible with the effective diffusion coefficient. If these configurations can accommodate sufficient flux of sucrose into the IC, while blocking raffinose and stachyose movement was assessed using literature data. While the slit-configuration would efficiently prevent the sugar oligomers from “leaking” from the IC, none of the configurations could enable a diffusion-driven sucrose flux that matches the reported rates at a physiologically relevant concentration potential. The presented data provides a first insight on how the substructure of PD could enable selective transport, but indicates that additional factors are involved in efficient phloem loading in active symplasmic loading species. PMID

  10. Determination of Activity of the Enzymes Hypoxanthine Phosphoribosyl Transferase (HPRT) and Adenine Phosphoribosyl Transferase (APRT) in Blood Spots on Filter Paper.

    PubMed

    Auler, Kasie; Broock, Robyn; Nyhan, William L

    2015-01-01

    Hypoxanthine-guanine phosphoribosyl-transferase (HPRT) deficiency is the cause of Lesch-Nyhan disease. Adenine phosphoribosyl-transferase (APRT) deficiency causes renal calculi. The activity of each enzyme is readily determined on spots of whole blood on filter paper. This unit describes a method for detecting deficiencies of HPRT and APRT. PMID:26132002

  11. Forestry and charcoal burning in the vicinity of the ironwork Peitz (South Brandenburg, Germany) - What do we know from historical and archaeological data?

    NASA Astrophysics Data System (ADS)

    Takla, Melanie; Frank, Müller; Horst, Rösler; Raab, Alexandra; Raab, Thomas

    2014-05-01

    The former royal forest districts around Peitz (South Brandenburg, Germany) were used to produce charcoal for the ironwork Peitz (1554 to 1856). More than 800 archaeologically excavated ground plans of charcoal kilns give evidence of the burning activity in the study area "Jänschwalde Heide" which is only a small part of the whole forest district. The study area in the apron of the active lignite mine Jänschwalde comprises the royal forest "Jänschwalder Heide" and the surrounding community forests. Our study approach combines archaeological research, a GIS-based approach (historical maps, airborne laser scanning (ALS) data, etc.) and archival studies. The charcoal kilns have been registered since 1990 and since 2005 they are systematically excavated and documented. First dendrochronological data reach from the 17th to the 19th century confirming charcoal burning during the operation period of the iron work. Moreover 5000 additional kilns were identified and digitized from Shaded Relief Maps (SRM) created from ALS data (resolution 1p m-2; height accuracy +- 15 cm). A kiln field of such a dimension has not been documented and investigated for the North German Lowlands so far. It raises the question about the effects of charcoal burning on the forests and the landscape during the last three hundred years. Here we present the evaluation of the kiln data with regard to their size, frequency and spatial distribution. Besides the large number, the kilns have also large diameters (modal value 17 m, mean 12,5 m). Outside the boundaries of the royal forest the kilns are smaller and they were probably used to produce charcoal for local handcraft. These findings are compared to historical records from the first forest inventories (18th/19th century) like forest age and area, with historical forest laws and wood consumption data of the iron work. There is growing evidence that despite of the large extent of the kiln field the wood reserves in the forest districts about 1800

  12. Research of morphology structure and properties of bamboo charcoal acrylic fiber

    NASA Astrophysics Data System (ADS)

    Zhang, Yongjiu; Feng, Aifen

    2015-07-01

    In order to understand the properties of bamboo charcoal acrylic fiber, the tensile properties, friction properties and hygroscopicity of it, the bamboo charcoal acrylic fiber and the ordinary acrylic fiber were tested, compared and analyzed. The burning behaviors of the two kinds of fibers were observed by burning test, and their cross-sectional and longitudinal morphology was observed with scanning electron microscope (SEM). The SEM pictures showed that there are the uneven sizes of microspores on the surface of bamboo charcoal acrylic fiber and in it. It was found that the friction coefficients of the bamboo charcoal acrylic fiber are smaller and its tensile and moisture absorption are better than those of the ordinary acrylic fiber. However, there are no obvious differences of the burning behaviors between the two fibers.

  13. Combustion efficiency and hydrocarbon emissions from charcoal production kilns in the tropics

    SciTech Connect

    Ward, D.E.; Hao, W.M.; Babbitt, R.E.

    1995-12-01

    Charcoal is one of the major energy resources in tropical countries. We investigate the combustion processes in charcoal production kilns in Zambia and Brazil. The Zambian kilns were made of earth and there was sufficient air for combustion inside the kilns. The Brazilian kilns were made of bricks which limited the available oxygen. The combustion efficiency and the concentrations of CO{sub 2}, CO, CH{sub 4}, C{sub 2}-C{sub 6} alkanes and alkenes, and aromatic compounds produced were monitored throughout the combustion processes. The contributions of charcoal production processes to the atmospheric sources of these gases were estimated. The strategies for improving charcoal yield and reducing emissions of carbon-containing compounds are discussed.

  14. Chemical structure of wood charcoal by infrared spectroscopy and multivariate analysis.

    PubMed

    Labbé, Nicole; Harper, David; Rials, Timothy; Elder, Thomas

    2006-05-17

    In this work, the effect of temperature on charcoal structure and chemical composition is investigated for four tree species. Wood charcoal carbonized at various temperatures is analyzed by mid infrared spectroscopy coupled with multivariate analysis and by thermogravimetric analysis to characterize the chemical composition during the carbonization process. The multivariate models of charcoal were able to distinguish between species and wood thermal treatments, revealing that the characteristics of the wood charcoal depend not only on the wood species, but also on the carbonization temperature. This work demonstrates the potential of mid infrared spectroscopy in the whiskey industry, from the identification and classification of the wood species for the mellowing process to the chemical characterization of the barrels after the toasting and charring process. PMID:19127715

  15. Measurement and calculation of the sound absorption coefficient of pine wood charcoal

    NASA Astrophysics Data System (ADS)

    Suh, Jae Gap; Baik, Kyung min; Kim, Yong Tae; Jung, Sung Soo

    2013-10-01

    Although charcoal has been widely utilized for physical therapy and as a deodorant, water purifier, etc. due to its porous features, research on its role as a sound-absorbing material is rarely found. Thus, the sound absorption coefficients of pine wood charcoal were measured using an impedance tube and were compared with the theoretical predictions in the frequency range of 500˜ 5000 Hz. The theory developed in the current study only considers the lowest possible mode propagating along the air channels of the charcoal and shows good agreements with the measurements. As the frequency is increased, the sound absorption coefficients of pine wood charcoals also increase, but are lower than those of other commonly-used sound-absorbing materials.

  16. Life cycle assessment comparison of activated sludge, trickling filter, and high-rate anaerobic-aerobic digestion (HRAAD).

    PubMed

    Postacchini, Leonardo; Lamichhane, Krishna M; Furukawa, Dennis; Babcock, Roger W; Ciarapica, F E; Cooney, Michael J

    2016-01-01

    This paper conducts a comparative assessment of the environmental impacts of three methods of treating primary clarifier effluent in wastewater treatment plants (WWTPs) through life cycle assessment methodology. The three technologies, activated sludge (AS), high rate anaerobic-aerobic digestion (HRAAD), and trickling filter (TF), were assessed for treatment of wastewater possessing average values of biochemical oxygen demand and total suspended solids of 90 mg L(-1) and 70 mg L(-1), respectively. The operational requirements to process the municipal wastewater to effluent that meets USEPA regulations have been calculated. The data for the AS system were collected from the East Honolulu WWTP (Hawaii, USA) while data for the HRAAD system were collected from a demonstration-scale system at the same plant. The data for the TF system were estimated from published literature. Two different assessment methods have been used in this study: IMPACT 2002+ and TRACI 2. The results show that TF had the smallest environmental impacts and that AS had the largest, while HRAAD was in between the two but with much reduced impacts compared with AS. Additionally, the study shows that lower sludge production is the greatest advantage of HRAAD for reducing environmental impacts compared with AS. PMID:27191555

  17. Adaptive Volterra filter with continuous lp-norm using a logarithmic cost for nonlinear active noise control

    NASA Astrophysics Data System (ADS)

    Lu, Lu; Zhao, Haiquan

    2016-03-01

    The filtered-x least mean lp-norm (FxLMP) algorithm is proven to be useful for nonlinear active noise control (NANC) systems. However, its performance deteriorates when the impulsive noises are presented in NANC systems. To surmount this shortcoming, a new nonlinear adaptive algorithm based on Volterra expansion model (VFxlogLMP) is developed in this paper, which is derived by minimizing the lp-norm of logarithmic cost. It is found that the FxLMP and VFxlogLMP require to select an appropriate value of p according to the prior information on noise characteristics, which prohibit their practical applications. Based on VFxlogLMP algorithm, we proposed a continuous lp-norm algorithm with logarithmic cost (VFxlogCLMP), which does not need the parameter selection and thresholds estimation. Benefiting from the various error norms for 1≤p≤2, it remains the robustness of VFxlogLMP. Moreover, the convergence behavior of VFxlogCLMP for moving average secondary paths and stochastic input signals is performed. Compared to the existing algorithms, two versions of the proposed algorithms have much better convergence and stability in impulsive noise environments.

  18. Kalman filter methods for real-time frequency and mode number estimation of MHD activity in tokamak plasmas

    NASA Astrophysics Data System (ADS)

    Alves, D.; Coelho, R.; JET EFDA contributors, the

    2013-10-01

    Magnetohydrodynamic (MHD) activity in magnetically confined fusion experiments is often associated with detrimental effects such as increased radial transport and consequent loss of confinement. In particular, the (2,1) neoclassical tearing mode (NTM), when proceeding to mode-locking, is a potentially disruptive instability hence with the potential to compromise the mechanical integrity of the machine. It is therefore quite significant to be able to characterize in real-time the most virulent and performance limiting instabilities such that adequate mitigation or complete stabilization using feedback control methods are employed during the plasma discharge. This work proposes a Kalman filter (KF) based mechanism for providing, in real-time, the amplitude and phase evolution of instabilities within a predefined set of mode numbers. The method relies on two KF implementations: a non-linear KF isolating the non-stationary dominant signal component of a sensor measurement and subsequently a linear KF which projects the former, for a collection of sensors, onto a predefined set of mode numbers. A basic overview of algorithms commonly used for real-time mode number analysis is also presented along with applications of the proposed algorithm to recently recorded data of the Joint European Torus (JET) tokamak.

  19. Combination of ozonation, activated carbon, and biological aerated filter for advanced treatment of dyeing wastewater for reuse.

    PubMed

    Zou, Xiao-Ling

    2015-06-01

    Laboratorial scale experiments were performed to investigate and evaluate the performance and removal characteristics of organics, color, and genotoxicity by an integrated process including ozonation, activated carbon (AC), and biological aerated filter (BAF) for recycling biotreated dyeing wastewater (BTDW) collected from a cotton textile factory. Influent chemical oxygen demand (COD) in the range of 156 - 252 mg/L, 5-day biochemical oxygen demand (BOD5) of 13.5 - 21.7 mg/L, and color of 58 - 76° were observed during the 20-day continuous operation. Outflows with average COD of 43 mg/L, BOD5 of 6.6 mg/L, and color of 5.6° were obtained after being decontaminated by the hybrid system with ozone dosage of 0.25 mg O3applied/mg COD0, 40 min ozonation contact time, 30 min hydraulic retention time (HRT) for AC treatment, and 2.5 h HRT for BAF treatment. More than 82 % of the genotoxicity of BTDW was eliminated in the ozonation unit. The genotoxicity of the BAF effluent was less than 1.33 μg 4-nitroquinoline-N-oxide/L. Ozonation could change the organics molecular structures, destroy chromophores, increase the biodegradability, and obviously reduce the genotoxicity of BTDW. Results showed that the combined process could guarantee water reuse with high quality. PMID:25843826

  20. Reduction of Carbon Dioxide in Filtering Facepiece Respirators with an Active-Venting System: A Computational Study

    PubMed Central

    Birgersson, Erik; Tang, Ee Ho; Lee, Wei Liang Jerome; Sak, Kwok Jiang

    2015-01-01

    During expiration, the carbon dioxide (CO2) levels inside the dead space of a filtering facepiece respirator (FFR) increase significantly above the ambient concentration. To reduce the CO2 concentration inside the dead space, we attach an active lightweight venting system (AVS) comprising a one-way valve, a blower and a battery in a housing to a FFR. The achieved reduction is quantified with a computational-fluid-dynamics model that considers conservation of mass, momentum and the dilute species, CO2, inside the FFR with and without the AVS. The results suggest that the AVS can reduce the CO2 levels inside the dead space at the end of expiration to around 0.4% as compared to a standard FFR, for which the CO2 levels during expiration reach the same concentration as that of the expired alveolar air at around 5%. In particular, during inspiration, the average CO2 volume fraction drops to near-to ambient levels of around 0.08% with the AVS. Overall, the time-averaged CO2 volume fractions inside the dead space for the standard FFR and the one with AVS are around 3% and 0.3% respectively. Further, the ability of the AVS to vent the dead-space air in the form of a jet into the ambient – similar to the jets arising from natural expiration without a FFR – ensures that the expired air is removed and diluted more efficiently than a standard FFR. PMID:26115090

  1. Enhanced photocatalytic degradation and adsorption of methylene blue via TiO2 nanocrystals supported on graphene-like bamboo charcoal

    NASA Astrophysics Data System (ADS)

    Wu, Fangjun; Liu, Wei; Qiu, Jielong; Li, Jinzhen; Zhou, Wuyi; Fang, Yueping; Zhang, Shuting; Li, Xin

    2015-12-01

    In this study, a novel efficient photocatalytic nanomaterial, TiO2 nanocrystals supported on graphene-like bamboo charcoal, has been successfully synthesized via a facile multi-step process. The structural and optical properties of the as-prepared samples were characterized by different techniques, such as X-ray diffraction (XRD), transmission electron microscopy (TEM), UV-vis absorption spectroscopy, photoluminescence spectra (PL), Raman spectra and nitrogen adsorption-desorption isotherms. The photocatalytic activities under sunlight were evaluated by the degradation of methylene blue (MB). The results indicated that the ternary hybrid photocatalysts exhibited much higher photocatalytic activities toward the degradation of MB than the pure TiO2 under UV light irradiation. Moreover, the optimum weight content of graphene-like bamboo charcoal in composite photocatalysts was 6 wt% for achieving the maximum photocatalytic degradation rate. The apparent rate constant of the best sample (0.0509 min-1) was about 3 times greater than that of the commercial P25 (0.0170 min-1). The adsorption and degradation kinetics of MB can be described by the pseudo-first-order model and apparent first-order kinetics model, respectively. The highly enhanced photocatalytic performance was attributed to the synergetic effect of graphene-like carbon and bamboo charcoal, which lead to the promoted charge separation and reduction reaction of oxygen, and enhanced adsorption capacities of MB, respectively. The composite photocatalysts displayed a high photochemical stability under repeated irradiation. This work may provide new insights and understanding on the graphene-like bamboo charcoal as an excellent support for photocatalyst nanoparticles to enhance their visible-light photocatalytic activity.

  2. Applied Technology of Bamboo Charcoal to Improvement and Purification of Air Quality

    NASA Astrophysics Data System (ADS)

    Takimoto, Akira; Tada, Yukio; Onishi, Hajime; Fukazawa, Tomohiro

    The use of bamboo charcoal, which is one of the carbon from wood, attracts attention from the viewpoint of the environmental protection. Bamboo charcoal has high adsorption removal ability to various substances. In addition Bamboo charcoal is effective also for the filtration of the suspended solid and the bacterium by the macro pore that originates in the plant frame structure. In present paper, a new concept of gas clean technology by bamboo charcoal and TiO2 with UV light irradiation was proposed. Its system is composed of TiO2-coated bamboo charcoal, TiO2-coated silica gel and UV lamp. Water vapor is adsorbed by bamboo charcoal and fine particles and airborne bacterium are trapped on the surface of it. Trapped contaminant is degraded by TiO2 and UV light. In addition, the degradation is promoted by •OH produced by adsorbed water vapor. The air purification sanitization possibility in high efficiency for this system was clarified.

  3. Experience with improved charcoal and wood stoves for households and institutions in Kenya

    SciTech Connect

    Hyman, E.L.

    1985-01-01

    Efforts at promoting more fuel-efficient charcoal stoves to replace traditional charcoal stoves in Kenya offer some lessons for the dissemination of appropriate technologies. This paper looks at the market-based approach which has made the Kenyan charcoal stoves project a success. Trends in woodfuels (wood and charcoal) consumption in Kenya are identified; the traditional technology for charcoal combustion and the upgraded traditional technologies are described; production achievement and the dissemination and promotion strategy used are examined; and a financial and economic analysis is performed with social, health and environmental effects assessed. Other ways to achieve a more favourable balance between woodfuels consumption and supply are then discussed looking at more efficient charcoal kilns and household woodstoves, improved institutional stoves and increased wood production. The replication potential of the Kenya experiment in other countries is also explored. The lessons learnt from the the Kenya experience concern the relationship between technology, choice and delivery systems as they interact with, economic, institutional, and policy factors. In this case, the design work accepted the traditional technology as a starting point which helped ensure widespread acceptance by households. The potential desirability of relying on local artisans to manufacture consumer durables using existing private sector channels to market these goods is also shown. It also highlights the importance of going beyond a laissez-faire approach and supporting training, demonstration, and publicity to faciliate the workings of the private sector. In the Kenyan case, technology choice was relatively unsubsidized and left ot the preferences of consumers.

  4. A contribution to the identification of charcoal origin in Brazil II - Macroscopic characterization of Cerrado species.

    PubMed

    Gonçalves, Thaís A P; Nisgoski, Silvana; Oliveira, Julia S; Marcati, Carmen R; Ballarin, Adriano W; Muñiz, Graciela I B

    2016-05-13

    The Brazilian Cerrado is the richest savanna in the world. It is also one of the biomes more threatened in the country and a hotspot for conservation priorities. The main causes of deforestation in Cerrado are agricultural practices, livestock and charcoal production. Although charcoal has a minor impact, its consumption represents the deforestation of 16.000 Km² of the Cerrado. To contribute for the biomes's conservation it is very important to improve forestry supervision. Thus, in this work we present the macroscopic characterization of charcoal from 25 Cerrado's species. We simulate the real conditions of forest controllers by using the magnifications of 10x, 25x and 65x. Likewise, the charcoals micrographs are all of transverse sections due to the larger amount of anatomical information. We also analyzed texture, brightness, vitrification, ruptures and some special features. The species present several differences in their anatomical structure. Although some of them are very unique, this work does not intent to identify charcoals only by macroscopic analyses. But it might give directions to future identification of genera or species. It also provides knowledge for government agents to verify the documents of forestry origin by fast analyzing a sample of charcoal itself. PMID:27192198

  5. Estimation of emissions from charcoal lighter fluid and review of alternatives. Final report

    SciTech Connect

    Campbell, D.L.; Stockton, M.B.

    1990-01-01

    The report gives results of an evaluation of emissions of volatile organic compounds (VOCs) from charcoal lighter fluid, a consumer product consisting entirely of volatile constituents. An estimated 46,250 tons (42,000 Mg) of charcoal lighter fluid is used in the U.S. each year. VOCs contribute to the formation of ozone; therefore, the ozone nonattainment issue has focused attention on VOCs emitted from many sources. VOCs are emitted when charcoal lighter fluid is used, but these emissions are difficult to quantify. Evaporative VOC losses occur from the lighter fluid prior to ignition, and combustion VOC losses occur from burning lighter-fluid-soaked charcoal briquettes. This study evaluates tests conducted to date on charcoal lighter fluid emissions. The information is most complete for evaporative VOC losses. The estimates vary greatly, however, based on the length of time between application of the lighter fluid and ignition. The limited tests conducted to date have not distinguished lighter fluid from charcoal-briquette combustion emissions.

  6. Chemical and Isotopic Thresholds in Charring: Implications for the Interpretation of Charcoal Mass and Isotopic Data.

    PubMed

    Pyle, Lacey A; Hockaday, William C; Boutton, Thomas; Zygourakis, Kyriacos; Kinney, Timothy J; Masiello, Caroline A

    2015-12-15

    Charcoal plays a significant role in the long-term carbon cycle, and its use as a soil amendment is promoted as a C sequestration strategy (biochar). One challenge in this research area is understanding the heterogeneity of charcoal properties. Although the maximum reaction temperature is often used as a gauge of pyrolysis conditions, pyrolysis duration also changes charcoal physicochemical qualities. Here, we introduce a formal definition of charring intensity (CI) to more accurately characterize pyrolysis, and we document variation in charcoal chemical properties with variation in CI. We find two types of responses to CI: either linear or threshold relationships. Mass yield decreases linearly with CI, while a threshold exists across which % C, % N, and δ(15)N exhibit large changes. This CI threshold co-occurs with an increase in charcoal aromaticity. C isotopes do not change from original biomass values, supporting the use of charcoal δ(13)C signatures to infer paleoecological conditions. Fractionation of N isotopes indicates that fire may be enriching soils in (15)N through pyrolytic N isotope fractionation. This influx of "black N" could have a significant impact on soil N isotopes, which we show theoretically using a simple mass-balance model. PMID:26523420

  7. Phanerozoic concentrations of atmospheric oxygen reconstructed from sedimentary charcoal

    NASA Astrophysics Data System (ADS)

    Glasspool, Ian J.; Scott, Andrew C.

    2010-09-01

    Variations of the Earth's atmospheric oxygen concentration (pO2) are thought to be closely tied to the evolution of life, with strong feedbacks between uni- and multicellular life and oxygen. On the geologic timescale, pO2 is regulated by the burial of organic carbon and sulphur, as well as by weathering. Reconstructions of atmospheric O2 for the past 400million years have therefore been based on geochemical models of carbon and sulphur cycling. However, these reconstructions vary widely, particularly for the Mesozoic and early Cenozoic eras. Here we show that the abundance of charcoal in mire settings is controlled by pO2, and use this proxy to reconstruct the concentration of atmospheric oxygen for the past 400million years. We estimate that pO2 was continuously above 26% during the Carboniferous and Permian periods, and that it declined abruptly around the time of the Permian-Triassic mass extinction. During the Triassic and Jurassic periods, pO2 fluctuated cyclically, with amplitudes up to 10% and a frequency of 20-30million years. Atmospheric oxygen concentrations have declined steadily from the middle of the Cretaceous period to present-day values of about 21%. We conclude, however, that variation in pO2 was not the main driver of the loss of faunal diversity during the Permo-Triassic and Triassic-Jurassic mass extinction events.

  8. Homemade bone charcoal adsorbent for defluoridation of groundwater in Thailand.

    PubMed

    Smittakorn, Sunisa; Jirawongboonrod, Nithat; Mongkolnchai-arunya, Surat; Durnford, Deanna

    2010-12-01

    High levels of fluoride in groundwater are a significant environmental and health problem in Thailand, as in many parts of the world. Small household defluoridators have several advantages over centralized treatment systems. In Thailand, however, use of bone char for water treatment has met resistance because of objectionable taste and odours of the water produced and the social resistance to handling fresh bone. This paper presents a method that uses bone charcoal as an absorbent for removing fluoride from groundwater. The commercially provided boiled bone is burned in a simple homemade furnace that can be constructed, operated and maintained easily by small rural householders. The method to produce the Thai bone char eliminates the odour and objectionable taste and also does not require the user to handle fresh bone, thus eliminating the social resistance. To evaluate the efficacy of the absorbent, batch experiments compare Thai and Indian bone char. Sorption isotherms are fit to the Freundlich and Langmuir equations and the kinetics are modelled using the pseudo first-order Lagergren equation. Results show that the sorption characteristics of Thai bone char compare favourably with the Indian bone char, with approximately 80% of the fluoride removed in both cases. PMID:20705992

  9. Activated sludge filterability improvement by nitrifying bacteria abundance regulation in an adsorption membrane bioreactor (Ad-MBR).

    PubMed

    Sun, Fei-yun; Lv, Xiao-mei; Li, Ji; Peng, Zhong-yi; Li, Pu; Shao, Ming-fei

    2014-10-01

    Autotrophic nitrifying bacteria have its intrinsic properties including low EPS production, dense colonial structure and slow-growth rate, favoring the sludge filterability improvement. An adsorption-MBR (Ad-MBR) was developed to enrich nitrifier abundance in the MBR chamber by inlet C/N regulation, and its possible positive effect on sludge filterability and underlying mechanisms were investigated. By DNA extraction, PCR amplification and Illumina high-throughput pyrosequencing, the abundance of nitrifying bacteria was accurately quantified. More than 8.29% nitrifier abundance was achieved in Ad-MBR sludge, which was above three times of that in conventional MBR. Regulated C/N ratio and thereafter nitrifier abundance enrichment improved sludge filterability by altering sludge mixture and its supernatant properties, reflected by a good sludge settleability, a low supernatant viscosity and turbidity, a low supernatant organic substances concentration, and a small amount of strong hydrophobic fractional components, thus to profoundly improve sludge filterability and decelerate membrane fouling. PMID:25146315

  10. Evaluation of media used in indigenous household iron filter units of rural and semi-urban Assam, India.

    PubMed

    Ahamad, Kamal Uddin; Jawed, Mohammad

    2007-10-01

    Ground water, the major source of drinking water in rural and semi-urban areas of Assam, contains an excessive amount of iron varying from 1 to 10 mg/L or more. People in Assam invariably use household iron filter units-indigenously developed using locally available wooden charcoal and river sand as filter media. The present work is aimed to evaluate effectiveness of wooden charcoal and river sand for its iron adsorption capacity. The experiments were carried at a fixed pH of 5.5 with zero dissolved oxygen levels. Batch kinetic studies indicated rapid uptake of Fe(II) by wooden charcoal in the first 20 min. while the uptake with sand was relatively slower. The adsorption seemed to govern by diffusion within pores of adsorbents and Fe(II) removal mechanism appeared to be complex. Equilibrium studies indicated favorable adsorption of Fe(II) on both adsorbents and followed Langmuir isotherm. Column studies indicated relatively quicker breakthrough through sand bed as compared to charcoal bed. Overall, wooden charcoal and sand both seemed to have potentials for Fe(II) removal. PMID:18476369

  11. Chemical changes in soil charcoal of differing ages inferred from DRIFT spectra

    NASA Astrophysics Data System (ADS)

    Hobley, E. U.; Willgoose, G. R.; Frisia, S.; Jacobsen, G.

    2012-04-01

    Visible charcoal fragments were manually isolated from a sandy soil from the Southern Highlands of NSW, Australia, at depths of 0 - 30 cm and 30 - 60 cm. In the topsoil, the charcoal had a radiocarbon age of 85 ± 35 years BP, whereas the charcoal from the 30 - 60 cm layer was radiocarbon dated at 2540 ± 35 years BP. Diffuse reflectance FTIR (DRIFT) spectra of the charcoal reveal differences in both the number of peaks detected and their magnitudes. In the IR region 750 - 3800 cm-1, the charcoal from the lower depth had less peaks (140) than that of the topsoil (217). In the 1400 - 1600 cm-1 region, generally attributed to aromatics, the peaks were larger and more numerous (22 peaks) in the 0 - 30 cm sample than those of the 30 - 60 cm depth (14 peaks). The C-H stretch of alkenes and aromatics (3000 - 3100 cm-1) was similar at both depths, but the peak generally associated with the C-H stretch of alkanes (methyl and methylene groups) at 2850 - 3000 cm-1 was smaller in 30 - 60 cm depth than in the topsoil. In contrast to the reduction in aromatic and alkane signatures, oxidised forms were more pronounced in the older, deeper charcoal. Peaks associated with the free hydroxyl O-H stretch (alcohols and phenols) at 3640 - 3610 cm-1, carboxylic acids (910 - 950 cm-1), aliphatic O-H (alcohols) (1050 - 1150 cm-1) and cellulose-like structures (1020 cm-1), which contain a large number of uncondensed, oxidised rings, were larger in the charcoal from 30 - 60 cm than in that from the topsoil. Our results confirm that charcoal is highly persistent in soils, being retained for millennia. Aromatic structures are present in both younger and older charcoal, but decay leads to a reduction in the number and area of peaks detected at 1400 - 1600 cm-1, indicating less aromaticity. Alkane C-H also decreases with aging, probably attributable to its preferential degradation by soil microbes compared with condensed aromatic structures. Concurrent with diminished aromatic and alkane

  12. Influence of beer marinades on the reduction of carcinogenic heterocyclic aromatic amines in charcoal-grilled pork meat.

    PubMed

    Viegas, Olga; Moreira, Patrícia S; Ferreira, Isabel M P L V O

    2015-01-01

    The effect of beer marinades on the formation of heterocyclic aromatic amines (HAs) was examined in charcoal-grilled pork. Pilsner, non-alcoholic pilsner and black beers (coded respectively as PB, P0B and BB) were assayed and unmarinated samples cooked under similar conditions provided reference HAs levels. Two thermic (PhIP and 4,8-DiMeIQx) and three pyrolytic HAs (Trp-P-1, AαC, MeAαC) were quantified in unmarinated meat samples. Marinating meat in beer resulted in a significant decrease of PhIP, Trp-P-1 and AαC (p < 0.05). 4,8-DiMeIQx formation was inhibited only by BB marinade. No significant effect was observed on MeAαC formation. All beers reduced total HA formation in charcoal-grilled pork, black beer being the most efficient with a level of 90% inhibition. A strong positive correlation was observed between the inhibitory effect of beer on total HA formation and their antioxidant activity. Beer marinades mitigate the impact of consumption of well-done grilled pork meat reducing the formation of cooking carcinogens. PMID:25604939

  13. Facile and Sensitive Fluorescence Sensing of Alkaline Phosphatase Activity with Photoluminescent Carbon Dots Based on Inner Filter Effect.

    PubMed

    Li, Guoliang; Fu, Huili; Chen, Xuejie; Gong, Peiwei; Chen, Guang; Xia, Lian; Wang, Hua; You, Jinmao; Wu, Yongning

    2016-03-01

    A simple and sensitive fluorescent assay for detecting alkaline phosphatase (ALP) based on the inner filter effect (IFE) has been proven, which is conceptually different from the previously reported ALP fluorescent assays. In this sensing platform, N-doped carbon dots (CDs) with a high quantum yield of 49% were prepared by one-pot synthesis and were directly used as a fluorophore in IFE. p-Nitrophenylphosphate (PNPP) was employed to act as an ALP substrate, and its enzyme catalytic product (p-nitrophenol (PNP)) was capable of functioning as a powerful absorber in IFE to influence the excitation of fluorophore (CDs). When in the presence of ALP, PNPP was transformed into PNP and induced the absorption band transition from 310 to 405 nm, which resulted in the complementary overlap between the absorption of PNP and the excitation of CDs. Because of the competitive absorption, the excitation of CDs was significantly weakened, resulting in the quenching of CDs. The present IFE-based sensing strategy showed a good linear relationship from 0.01 to 25 U/L (R(2) = 0.996) and provided an exciting detection limit of 0.001 U/L (signal-to-noise ratio of 3). The proposed sensing approach was successfully applied to ALP sensing in serum samples, ALP inhibitor investigation and phosphatase cell imaging. The presented IFE-based CDs fluorescence sensing strategy gives new insight on the development of the facile and sensitive optical probe for enzyme activity assay because the surface modification or the linking between the receptor and the fluorophore is no longer required. PMID:26820049

  14. Resistance mechanisms to toxin-mediated charcoal rot infection in maturity group III soybean: role of seed phenol lignin soflavones sugars and seed minerals in charcoal rot resistance

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Charcoal rot is a disease caused by the fungus Macrophomina phaseolina (Tassi) Goid, and thought to infect the plants through roots by a toxin-mediated mechanism, resulting in yield loss and poor seed quality, especially under drought conditions. The mechanism by which this infection occurs is not y...

  15. Charcoal Morphology, a Useful Indicator of Fire Signature in Prosser Lake, British Columbia, Canada.

    NASA Astrophysics Data System (ADS)

    Enache, M. D.; Cumming, B. F.

    2004-12-01

    Observations of charcoal particle size and morphology were used along with quantitative analysis to extract indications on fire events over the last century from Prosser Lake (49\\deg45.05 N, 120\\deg37.30 W), a mesotrophic and slightly meromictic lake from British Columbia, Canada. Charcoal particles >150μ m were visually identified at a 0.5-3 years resolution in a laminated sedimentary sequence. According to their shape and structural features, charcoal particles were classified in seven morphologically distinct types and their abundances were assessed using Image Analysis techniques. Distributions of charcoal types were assessed as a proxy to fire events recorded between 1919-2000 and subsequent mechanisms of transportation-sedimentation to lake sediments. Frequent fires taking place before 1944, produced high amounts of charred particles, but strong fires that took place in 1939, 1940, 1958 and 1960 were poorly recorded by most of the charcoal types, whereas post-1944 periods of high precipitation levels without fire events increased their abundance. However, fragile-type fragments displaying high porosity walls showed a strong and significant correlation (R2 = 0.7; p = 0.02) with historically recorded forest fire in the proximity of Prosser Lake. Those fragments, according to their shape and structure might originate from high fragmentation of wood burning at high temperatures or by burning of small branches and leaves. Being very fragile, particles of this type would be destroyed by eventual secondary transportation processes and would not occur in levels not related to fire events. The remaining types of charcoal from Prosser Lake sediments displayed distributions biased by secondary transportation-sedimentation processes. We propose that charcoal morphology can be a useful indicator of fire occurrence, proximity of source-area and transportation-sedimentation mechanisms.

  16. Removal of E. coli from water using surface-modified activated carbon filter media and its performance over an extended use.

    PubMed

    Pal, Sukdeb; Joardar, J; Song, Joon Myong

    2006-10-01

    Modification of activated carbon (AC) by aluminum hydroxychloride (AHC), and diatomaceous earth by zinc hydroxide changed the zeta potentials of these filter media from negative to positive. The modification method is amenable to room temperature, and eliminates the essential requirement of strong base treatment for making metal hydroxide coated filter media. Solid-state MAS 27Al NMR spectra suggested the presence of Al13-mer in the AHC-treated AC. AHC-modified AC samples were further treated with silver halide, and two antibacterial compounds to prevent microbial growth on filter media. In situ precipitation of silver bromide on AC resulted in formation of nanosized AgBr crystals. Bacteria removal performances of the modified media were tested in columns. For the first time, we demonstrated that only 30 g of either AHC-treated AC (60 x 200 mesh) or nano AgBr supported AC could provide >6 log E. coli removal over approximately 1000 L when the input water had a bacterial load of 10(7) CFU/mL. The filter media were robust enough to perform even when water was passed at superficial velocities 3-10 times the typical velocity (6 cm/min) of water treatment processes. Metal leaching from the modified media was found to be less than the USEPA specified Maximum Contaminant Level. PMID:17051805

  17. Evaluation of bacteria isolated from rice rhizosphere for biological control of charcoal rot of sorghum caused by Macrophomina phaseolina (Tassi) Goid.

    PubMed

    Gopalakrishnan, Subramaniam; Humayun, Pagidi; Kiran, Bandru Keerthi; Kannan, Iyer Girish Kumar; Vidya, Meesala Sree; Deepthi, Kanala; Rupela, Om

    2011-06-01

    A total of 360 bacteria, isolated from the rhizospheres of a system of rice intensification (SRI) fields, were characterized for the production of siderophore, fluorescence, indole acetic acid (IAA), hydrocyanic acid (HCN) and solubilization of phosphorus. Of them, seven most promising isolates (SRI-156, -158, -178, -211, -229, -305 and -360) were screened for their antagonistic potential against Macrophomina phaseolina (causes charcoal rot in sorghum) by dual culture assay, blotter paper assay and in greenhouse. All the seven isolates inhibited M. phaseolina in dual culture assay, whereas six isolates solubilized phosphorous (except SRI-360), all seven produced siderophore, four produced fluorescence (except SRI-178, -229 and -305), six produced IAA (except SRI-305) and five produced HCN (except SRI-158 and -305). In the blotter paper assay, no charcoal rot infection was observed in SRI-156-treated sorghum roots, indicating complete inhibition of the pathogen, while the roots treated with the other isolates showed 49-76% lesser charcoal rot infection compared to the control. In the antifungal activity test (in green house on sorghum), all the isolates increased shoot dry mass by 15-23% and root dry mass by 15-20% (except SRI-158 and -360), over the control. In order to confirm the plant growth-promoting (PGP) traits of the isolates, the green house experiment was repeated but, in the absence of M. phaseolina. The results further confirmed the PGP traits of the isolates as evidenced by increases in shoot and root dry mass, 22-100% and 5-20%, respectively, over the control. The sequences of 16S rDNA gene of the isolates SRI-156, -158, -178, -211, -229, -305 and -360 were matched with Pseudomonas plecoglossicida, Brevibacterium antiquum, Bacillus altitudinis, Enterobacter ludwigii, E. ludwigii, Acinetobacter tandoii and P. monteilii, respectively in BLAST analysis. This study indicates that the selected bacterial isolates have the potential for PGP and control of

  18. Research on dye wastewater decoloration by pulse discharge plasma combined with charcoal derived from spent tea leaves.

    PubMed

    Wang, Tiecheng; Qu, Guangzhou; Pei, Shuzhao; Liang, Dongli; Hu, Shibin

    2016-07-01

    Pulsed discharge plasma (PDP) combined with charcoal (PDP-charcoal) was employed to treat dye wastewater, with methyl orange (MO) as the model pollutant. The charcoal was prepared using spent tea leaves and was characterized by scanning electron microscopy, Fourier-transform infrared spectroscopy, and Boehm titration to investigate the adsorption and catalytic characteristics before and after adsorption and PDP treatment. The prepared charcoal exhibited a high MO adsorption capacity, and the adsorption process followed the pseudo-second-order kinetic model and the Freundlich model. The MO decoloration efficiency reached 69.8 % within 7.5 min of treatment in the PDP-charcoal system, whereas values of 29.2 and 25.9 % were achieved in individual PDP and charcoal systems, respectively. The addition of n-butanol and H2PO4 (-) presented inhibitive effects on MO decoloration in the PDP system. However, these effects were much weaker in the PDP-charcoal system. In addition, the effects of charcoal on O3 and H2O2 formation were evaluated, and the results showed that both the O3 and H2O2 concentrations decreased in the presence of charcoal. The MO decomposition intermediates were analyzed using UV-Vis spectrometry and GC-MS. 1,4-Benzoquinone, 4-nitrophenol, 4-hydroxyaniline, and N,N'-dimethylaniline were detected. A possible pathway for MO decomposition in this system was proposed. PMID:27026548

  19. Effect of Catnip Charcoal on the In Vivo Pharmacokinetics of the Main Alkaloids of Rhizoma Coptidis.

    PubMed

    He, Yanfei; Chen, Siyu; Yu, Hai; Zhu, Long; Liu, Yayun; Han, Chunyang; Liu, Cuiyan

    2016-01-01

    This study aims to explore the effect of catnip Nepeta cataria (CNC) charcoal on the pharmacokinetics of the main alkaloids of Rhizoma Coptidis in vivo. Twenty-four rabbits were randomly divided into four groups and given oral administration of an aqueous extract of Rhizoma Coptidis (RCAE), RCAE plus CNC, RCAE plus activated carbon (AC), or distilled water, respectively. Plasma samples were collected after administration. The concentrations of berberine, coptisine, palmatine, and epiberberine in plasma were measured by high-performance liquid chromatography (HPLC). The pharmacokinetics data were calculated using pharmacokinetic DAS 2.0 software. The results showed that the area under the concentration-time curve (AUC) of berberine increased, while the AUC of coptisine, palmatine, and epiberberine decreased in the rabbits that received RCAE plus CNC. Meanwhile, the AUC of berberine, coptisine, palmatine, and epiberberine decreased in the group given RCAE plus AC. The difference of main pharmacokinetics parameters among the four groups was significant (P < 0.05). This study showed that CNC improved the bioavailability of berberine in comparison to AC and prolonged its release in comparison to RCAE alone. However, it decreased the bioavailability of coptisine, palmatine, and epiberberine. In comparison, AC uniformly declined the bioavailability of berberine, coptisine, palmatine, and epiberberine. PMID:27313645

  20. Effect of Catnip Charcoal on the In Vivo Pharmacokinetics of the Main Alkaloids of Rhizoma Coptidis

    PubMed Central

    He, Yanfei; Chen, Siyu; Yu, Hai; Zhu, Long; Liu, Yayun; Han, Chunyang; Liu, Cuiyan

    2016-01-01

    This study aims to explore the effect of catnip Nepeta cataria (CNC) charcoal on the pharmacokinetics of the main alkaloids of Rhizoma Coptidis in vivo. Twenty-four rabbits were randomly divided into four groups and given oral administration of an aqueous extract of Rhizoma Coptidis (RCAE), RCAE plus CNC, RCAE plus activated carbon (AC), or distilled water, respectively. Plasma samples were collected after administration. The concentrations of berberine, coptisine, palmatine, and epiberberine in plasma were measured by high-performance liquid chromatography (HPLC). The pharmacokinetics data were calculated using pharmacokinetic DAS 2.0 software. The results showed that the area under the concentration-time curve (AUC) of berberine increased, while the AUC of coptisine, palmatine, and epiberberine decreased in the rabbits that received RCAE plus CNC. Meanwhile, the AUC of berberine, coptisine, palmatine, and epiberberine decreased in the group given RCAE plus AC. The difference of main pharmacokinetics parameters among the four groups was significant (P < 0.05). This study showed that CNC improved the bioavailability of berberine in comparison to AC and prolonged its release in comparison to RCAE alone. However, it decreased the bioavailability of coptisine, palmatine, and epiberberine. In comparison, AC uniformly declined the bioavailability of berberine, coptisine, palmatine, and epiberberine. PMID:27313645

  1. Open charcoal chamber method for mass measurements of radon exhalation rate from soil surface.

    PubMed

    Tsapalov, Andrey; Kovler, Konstantin; Miklyaev, Peter

    2016-08-01

    Radon exhalation rate from the soil surface can serve as an important criterion in the evaluation of radon hazard of the land. Recently published international standard ISO 11665-7 (2012) is based on the accumulation of radon gas in a closed container. At the same time since 1998 in Russia, as a part of engineering and environmental studies for the construction, radon flux measurements are made using an open charcoal chamber for a sampling duration of 3-5 h. This method has a well-defined metrological justification and was tested in both favorable and unfavorable conditions. The article describes the characteristics of the method, as well as the means of sampling and measurement of the activity of radon absorbed. The results of the metrological study suggest that regardless of the sampling conditions (weather, the mechanism and rate of radon transport in the soil, soil properties and conditions), uncertainty of method does not exceed 20%, while the combined standard uncertainty of radon exhalation rate measured from the soil surface does not exceed 30%. The results of the daily measurements of radon exhalation rate from the soil surface at the experimental site during one year are reported. PMID:27132250

  2. Charcoal and the Record of Fire-related Sedimentation in Holocene Alluvial Sediments

    NASA Astrophysics Data System (ADS)

    Meyer, G. A.

    2006-12-01

    Over the last few decades, rising temperatures and ensuing severe wildfires in the western USA cordillera have provided the opportunity to examine processes and deposits of postfire sedimentation on alluvial fans and floodplains. Most events are generated by widespread surface runoff from intense convective-storm precipitation on severely burned slopes. Flow processes range from debris flow to sediment-charged water floods. Muddy debris flows best preserve coarse charcoal in fan deposits, whereas gravelly debris flows often comminute charcoal into fine particles. As charcoal remains suspended in high-energy hyperconcentrated and water floods, only their fine-grained deposits typically contain much charcoal. Charcoal is locally concentrated in low-energy fluvial deposits, but displays increasing evidence for reworking with distance from source. Charred vegetation and litter marking burned soil surfaces may be preserved under postfire fan and fluvial sediments. Modern deposits provide models for identification of Holocene fire-related sediments and estimates of paleofire severity. AMS 14C dating of discrete charcoal fragments allows sample selection to minimize errors of sample age > fire age. Fires are incompletely recorded in the event stratigraphy of one fan, but larger populations of 14C ages from numerous fans permit composite probability distributions that represent centennial- to millennial-scale changes in fire-related sedimentation across a study area. Records from Yellowstone and central Idaho indicate the large role of fire in episodic erosion across a range of conifer forests, most strongly during severe, multidecadal droughts in warmer periods (e.g. in Medieval time 900-1300 AD). In central Idaho, identification of charcoal macrofossils indicates broadly similar, aspect-controlled forest compositions over the last 3000 yr. Emerging data from the Sacramento Mountains, New Mexico, show rapid fan aggradation due to fire-related events in the warm middle

  3. Chemical recalcitrance of biochar and wildfire charcoal: how similar are they?

    NASA Astrophysics Data System (ADS)

    Santin, Cristina; Doerr, Stefan H.; Merino, Agustin

    2016-04-01

    The enhanced chemical resistance to biological degradation of pyrogenic materials, either produced during wildfires (charcoal) or by man (biochar), makes them long-term carbon sinks once incorporated in soils. In spite of their fundamental similarities, studies comparing the chemical recalcitrance of biochar and wildfire charcoal are scarce because analogous materials for accurate comparison are not easily available. Using solid-state 13C cross polarization-magic angle spinning nuclear magnetic resonance spectroscopy we characterized the chemical recalcitrance of pyrogenic materials generated from the same unburnt feedstooks (litter and dead wood from Pinus banksiana): (a) charcoal from a high-intensity wildfire and (b) biochar obtained by slow pyrolysis [3 treatments: 2 h at 350, 500 and 650°C]. For quantification, the spectra were divided into four regions representing different chemical environments of the 13C nucleus: alkyl C (0-45 ppm), O-alkyl C (45-110 ppm), olefinic and aromatic C(110-160 ppm), and carbonyl C (160-210 ppm). As an indicator of chemical recalcitrance, the degree of aromaticity (%) was calculated as follow: aromatic-C ∗ 100 / (alkyl C+ O alkyl-C + aromatic-C). The pyrogenic materials derived from wood show higher degrees of aromaticity (68 to 88%) than pyrogenic material derived from litter (40 to 88%). When comparing biochar and wildfire charcoal, biochars produced at 500 and 650°C always have higher degrees of aromaticity than wildfire charcoals, irrespective of the original feedstock. Wildfire charcoals always show a more heterogeneous chemical composition, with alkyl and O-alkyl compounds present even in charcoal generated at very high temperatures (temperatures up to 950 °C were recorded on the litter surface during the wildfire). However, biochars produced at 500 and 650 °C are mostly aromatic, and only the biochars produced at 350 °C show partial contribution of alkyl-C compounds. Our results suggest that biochar-type pyrogenic

  4. Modification of phencyclidine intoxification and biodisposition by charcoal and other treatments.

    PubMed

    Lyddane, J E; Thomas, B F; Compton, D R; Martin, B R

    1988-06-01

    Studies were conducted to determine whether single or combination treatments of charcoal, paraffin, cholestyramine, and/or ammonium chloride (NH4Cl), would alter the rotarod-measured motor dysfunction induced by 10 to 90 mg/kg of phencyclidine (PCP). Additionally, the effect of NH4Cl/charcoal treatment of the biodisposition of 50 mg/kg PCP was evaluated in order to assess whether amelioration of behavioral effects could be correlated to alterations in brain levels, plasma levels, and/or the renal clearance of PCP and metabolites. NH4Cl/charcoal treatment proved more effective at reducing intoxication than either treatment singly, though effectiveness was reduced by larger doses of PCP. NH4Cl/charcoal treatment reduced intoxification by 40, 16, and 21% at PCP doses of 10, 25, and 50 mg/kg. However, the reduction in motor dysfunction observed at 25 and 50 mg/kg PCP was greater than the sum of the individual treatments. In contrast, the effect of combined NH4Cl and charcoal treatment on the biodisposition of 50 mg/kg PCP is not synergistic, but appears instead to be due simply to the additive effects of the individual treatments. Thus the amelioration of PCP intoxication cannot be fully explained by alterations in PCP biodisposition. PMID:3174769

  5. Transfer Function of Multi-Stage Active Filters: A Solution Based on Pascal's Triangle and a General Expression

    ERIC Educational Resources Information Center

    Levesque, Luc

    2012-01-01

    A method is proposed to simplify analytical computations of the transfer function for electrical circuit filters, which are made from repetitive identical stages. A method based on the construction of Pascal's triangle is introduced and then a general solution from two initial conditions is provided for the repetitive identical stage. The present…

  6. Quantitative HPLC analysis of active pharmaceutical ingredients in syrup vehicle using centrifugal filter devices and determination of xanthan gum in syrup vehicle using rheometry.

    PubMed

    Chen, Yong; Tadey, Tanya; Hu, Mougang; Carr, Geoff; Guo, Junan

    2010-02-01

    Using rapid centrifugal filtration (filter membrane prevented compounds with molecular weight higher than the nominal molecular weight limit (NMWL) from transporting through the membrane, thus separating them from compounds with molecular weight smaller than NMWL, which would pass through the membrane. The purpose of this study aims to remove high molecular weight matrix (such as xanthan gum) interferences while achieving a quantitative analysis of the active pharmaceutical ingradients of interest. Two model active pharmaceutical ingredients, L-arginine and amphotericin B, were quantitatively recovered from the diluted syrup vehicle after centrifugation with the filter devices. The reproducibility [% relative standard deviation (RSD), peak area] of the filtered samples was less than 0.5%. For amphotericin B samples. The linear range was 0.28 microg/mL to 28.2 microg/mL. The limit of detection was 0.06 microg/mL. The limit of quantification was 0.28 microg/mL. The viscosity of a syrup vehicle changed linearly with the concentration of xanthan gum. A method was thus developed to determine xanthan gum in the syrup vehicle. The accuracy was within 95.0% to 105.0% at different concentration levels. PMID:20109286

  7. Highly stable rice-straw-derived charcoal in 3700-year-old ancient paddy soil: evidence for an effective pathway toward carbon sequestration.

    PubMed

    Wu, Mengxiong; Yang, Min; Han, Xingguo; Zhong, Ting; Zheng, Yunfei; Ding, Pin; Wu, Weixiang

    2016-01-01

    Recalcitrant charcoal application is predicted to decelerate global warming through creating a long-term carbon sink in soil. Although many studies have showed high stability of charcoal derived from woody materials, few have focused on the dynamics of straw-derived charcoal in natural environment on a long timescale to evaluate its potential for agricultural carbon sequestration. Here, we examined straw-derived charcoal in an ancient paddy soil dated from ~3700 calendar year before present (cal. year BP). Analytical results showed that soil organic matter consisted of more than 25% of charcoal in charcoal-rich layer. Similarities in morphology and molecular structure between the ancient and the fresh rice-straw-derived charcoal indicated that ancient charcoal was derived from rice straw. The lower carbon content, higher oxygen content, and obvious carbonyl of the ancient charcoal compared with fresh rice straw charcoal implied that oxidation occurred in the scale of thousands years. However, the dominant aromatic C of ancient charcoal indicated that rice-straw-derived charcoal was highly stable in the buried paddy soil due to its intrinsic chemical structures and the physical protection of ancient paddy wetland. Therefore, it may suggest that straw charcoal application is a potential pathway for C sequestration considering its longevity. PMID:25850742

  8. Characterization of coal and charcoal by alpha-particle and gamma-ray spectrometry

    NASA Astrophysics Data System (ADS)

    Carrasco Lourtau, A. M.; Rubio Montero, M. P.; Jurado Vargas, M.

    2015-11-01

    Although coal and charcoal have similar physical and chemical characteristics, there are several crystallographic procedures used to distinguish and characterize them. But if the matrix is crushed, there is no standard procedure to distinguish coal from charcoal. In this work, a procedure to characterize coal and charcoal samples based on the radioactive content is proposed. The first assay is by gamma-ray spectrometry, which allows a part of the radioactive content to be determined rapidly and non-destructively. Then, alpha-particle spectrometry is applied to assay the content of those radionuclides which are difficult to determine precisely by gamma-ray spectrometry. This second technique requires prior chemical purification of the carbon sample in order to separate the corresponding radionuclides of interest.

  9. A means to make open-face charcoal detectors respond correctly to varying concentration radon fields

    SciTech Connect

    Distenfeld, C.H.

    1995-12-31

    Ronca-Battista and D. Gray 87, outlined the poor response of open-face charcoal detectors to varying concentration radon fields. At worst, for two day exposures with open-face charcoal canisters, their Table 4 indicated a 75% under-response for radon concentrations that were 10 times higher during the first day of two, 10:1. TCS has made similar measurements with open-faced and diffusion barrier detectors in 20:1, 1:20, and 1:1 fields. For the worst case 20:1, measurements indicate TCS two day open-face canisters under respond by 50%, while the Cohen and TCS diffusion barrier devices under responded by about 37%. The reasons for the under response are radon diffusion out of the charcoal due to the forces of lower concentration during the second half of the exposure, and uncompensated radioactive decay of radon gas.

  10. Analysis of alkyl nitrates and selected halocarbons in the ambient atmosphere using a charcoal preconcentration technique

    SciTech Connect

    Atlas, E.; Schauffler, S. )

    1991-01-01

    A method has been developed to measure {ge}C{sub 3} alkyl nitrates and C{sub 1}-C{sub 2} halocarbons, such as perchloroethylene and bromoform, in ambient air. The method preconcentrates analytes on a 5-mg charcoal trap from multiliter volumes of air. Analytes are desorbed from the charcoal with a small volume of solvent and are analyzed by high-resolution gas chromatography with electron capture detection. Laboratory and field tests have been performed to evaluate method precision, analyte breakthrough, and compound recovery from the charcoal. Tests verified that the sampling/analytical system is free from artifact formation under clean to moderately polluted conditions, but further tests are required for areas of high concentrations of hydrocarbons, NO{sub x}, and oxidants. The method allows measurement of halocarbons and {ge}C{sub 3} alkyl nitrates at concentrations in the pptv range.

  11. Emissions of air toxics from a simulated charcoal kiln. Final report, October 1997--September 1998

    SciTech Connect

    Lemieux, P.M.

    1999-06-01

    The report gives results of experiments in a laboratory-scale charcoal kiln simulator to evaluate emissions of hazardous air pollutants from the production of charcoal in Missouri-type kilns. Fixed combustion gases were measured using continuous monitors. In addition, other pollutants, including methanol, volatile organic compounds, semivolatile organic compounds, and particle emission rates and size distributions were measured using various techniques. Emissions of all pollutants are reported in units of grams emitted per unit mass of initial wood converted to charcoal. Two burn conditions--slow and fast--were examined. High levels of methanol, benzene, and fine particulate were emitted in all tests. The estimated emissions from the fast burn conditions were significantly higher than those from the slow burn conditions.

  12. Emissions from street vendor cooking devices (charcoal grilling). Final report, January 1998--March 1999

    SciTech Connect

    Lee, S.Y.

    1999-06-01

    The report discusses a joint US/Mexican program to establish a reliable emissions inventory for street vendor cooking devices (charcoal grilling), a significant source of air pollutants in the Mexicali-Imperial Valley area of Mexico. Emissions from these devices, prevalent in the streets of Mexicali, Mexico, were investigated experimentally by measuring levels of particulate matter, particle size distributions, volatile and semivolatile organic compounds, aldehydes, and oxides of nitrogen and sulfur, emitted when meat is cooked on a grill over a charcoal fire. To investigate the emission rate, both beef and chicken were tested. Furthermore, both meats were marinated with a mixture similar to that used by the street vendors. Some tests were conducted with non-marinated beef for comparison. Two blank runs were performed sampling charcoal fires without meat. Finally, a simple control device, normally used in an exhaust fan to trap grease over a kitchen stove, was evaluated for its effectiveness in reducing emissions.

  13. Soil stratigraphy of charcoal kiln remains (CKR) in the Litchfield Hills, CT, USA

    NASA Astrophysics Data System (ADS)

    Raab, Thomas; Hirsch, Florian; Ouimet, Will; Dethier, David

    2016-04-01

    Charcoal kiln relicts (CKRs) are small anthropogenic landforms that are often found in historic mining areas. CKRs have not been a big research topic yet but mainly were studied as by-products of archaeological excavations. In the last years newly available and very accurate Digital Elevation Models (DEMs) based on high-resolution Airborne Laser Scanning (ALS) data have been used to identify these archaeological remains. In addition, findings of several thousands CKRs in the North German Lowland have increased the awareness that historical charcoal production may significantly contribute to Late Holocene landscape change. Besides the archaeological aspect of CKRs, potential impacts of charcoal burning on the ecology of modern soil landscapes and ecosystem processes must be considered. A relatively high density of CKRs is found in the Litchfield Hills nearby the town of West Cornwall, Litchfield County, CT, USA. The CKRs are especially well preserved on slopes of the tributary valleys of the Housatonic River and form little, circular ramparts with diameters normally less than ten meters. First, rough field surveys in Litchfield County in spring 2015 have suggested differences between soils inside and outside the CKR. Soils on the CKR seem to have relatively deep humus-rich and charcoal containing topsoils whereas the topsoils outside the CKR appear typically thinner and less rich in humus. More thorough investigations have been started in autumn 2015 to prove the hypothesis that properties, distribution and development of soils are controlled by archaeological remains of historical charcoal burning. We present preliminary results from our field studies conducted in October 2015. The stratigraphy and the extent of the 26 CKRs were studied using a sedimentological-pedological approach by coring and trenching. Our results indicate that in Litchfield County the CKRs were used twice and in quick succession. Before the second reuse, the rim of the platform was stabilized

  14. An improved sup 222 Rn canister using a two-stage charcoal system

    SciTech Connect

    Scarpitta, S.C.; Harley, N.H. )

    1991-02-01

    A prototype for an improved passive {sup 222}Rn canister (R-Canister) was designed and compared to conventional charcoal canisters for its adsorptive and desorptive characteristics following exposures to {sup 222}Rn at 23{degrees}C in the presence of water vapor. The R-Canister, containing a two-stage charcoal system, minimizes the adverse effects of water vapor by maintaining the amount of adsorbed water vapor in the primary Rn adsorbent below the break-point of the charcoal. This is achieved by the placement of a desiccant charcoal cartridge 6 cm above the primary Rn adsorbent. The optimal bed depth of the primary adsorbent, determined from a diffusion study, was found to be 2.3 cm. The measured value for the effective diffusion coefficient of RN in a peat-based charcoal at 15% humidity and 25{degrees}C is 7.97 x 10(-10) m2 s-1. Exposures to 70% humidity for 7 d increased the buildup time-constant of Rn in the R-Canisters by 33% as compared to R-Canisters exposed to 15% humidity. At relative humidities ranging from 15-70%, the {sup 222}Rn buildup time-constant of the R-Canister ranged from 43-94 h, whereas the desorption time-constant ranged from 46-64 h. Typical buildup time-constants and desorption time-constants for conventional fully-opened charcoal canisters currently in field use ranged from 30-43 h and 17-29 h, respectively, over the same range of humidities.

  15. Role of charcoal tattooing in localization of recurred papillary thyroid carcinoma: initial experiences

    PubMed Central

    Kwon, Hyungju; Tae, Soon Young; Kim, Su-Jin; Jung, Kyeong Cheon; Kim, Ji-Hoon; Youn, Yeo-Kyu

    2015-01-01

    Purpose Surgical excision is the definitive treatment for localized recurrence of papillary thyroid carcinoma. Reoperation for recurrence, however, is challenging and associated with increased operative times and complication rates. For safe and effective reoperation, ultrasound-guided charcoal tattooing localization can be used. The aim of this study was to investigate the feasibility and safety of the ultrasound-guided charcoal tattooing localization. Methods Between November 2012 and August 2013, ten patients underwent preoperative charcoal tattooing localization for twelve recurrent lesions. Patient demographics, pathologic features, and operation results were reviewed. Results The technical success rate of charcoal tattooing was 100%. Eight patients had one recurrent lesion, and two patients had double lesions. Among these 12 recurrent lesions, three (25%) were found in level II, four (33%) in level IV, four (33%) in level VI, and one (8%) was found in the thyroidectomy bed site. The mean size of lesions was 0.87 ± 0.35 cm. Of these 10 patients, eight patients underwent selective lymph node dissection, one patient underwent modified radical neck dissection, and one patient underwent recurrent mass excision. Transient hypocalcemia developed in one patient, and no recurrent laryngeal nerve palsy occurred. There were no major complications related to the injection of the charcoal. The mean follow-up period after reoperation was 8.6 ± 2.7 months; in the follow-up ultrasound, there were no remnant lesions in all patients. Conclusion Preoperative ultrasound-guided charcoal tattooing localization for recurrent thyroid cancer appears to be a feasible and safe procedure for reoperation. Further evaluation is warranted in larger patients' cohorts. PMID:25741493

  16. In Situ NDA Conformation Measurements Performed at Auxiliary Charcoal Bed and Other Main Charcoal Beds After Uranium Removal from Molten Salt Reactor Experiment ACB at Oak Ridge National Laboratory

    SciTech Connect

    Haghighi, M. H.; Kring, C. T.; McGehee, J. T.; Jugan, M. R.; Chapman, J.; Meyer, K. E.

    2002-02-26

    The Molten Salt Reactor Experiment (MSRE) site is located in Tennessee, on the U.S. Department of Energy (DOE) Oak Ridge Reservation (ORR). The MSRE was run by Oak Ridge National Laboratory (ORNL) to demonstrate the desirable features of the molten-salt concept in a practical reactor that could be operated safely and reliably. It introduced the idea of a homogeneous reactor using fuel salt media and graphite moderation for power and breeder reactors. The MSRE reactor and associated components are located in cells beneath the floor in the high-bay area of Building 7503. The reactor was operated from June 1965 to December 1969. When the reactor was shut down, fuel salt was drained from the reactor circuit to two drain tanks. A ''clean'' salt was then circulated through the reactor as a decontamination measure and drained to a third drain tank. When operations ceased, the fuel and flush salts were allowed to cool and solidify in the drain tanks. At shutdown, the MSRE facility complex was placed in a surveillance and maintenance program. Beginning in 1987, it was discovered that gaseous uranium (U-233/U-232) hexafluoride (UF6) had moved throughout the MSRE process systems. The UF6 had been generated when radiolysis in the fluorine salts caused the individual constituents to dissociate to their component atoms, including free fluorine. Some of the free fluorine combined with uranium fluorides (UF4) in the salt to produce UF6. UF6 is gaseous at slightly above ambient temperatures; thus, periodic heating of the fuel salts (which was intended to remedy the radiolysis problems) and simple diffusion had allowed the UF6 to move out of the salt and into the process systems of MSRE. One of the systems that UF6 migrated into due to this process was the offgas system which is vented to the MSRE main charcoal beds and MSRE auxiliary charcoal bed (ACB). Recently, the majority of the uranium laden-charcoal material residing within the ACB was safely and successfully removed using

  17. Research on Bamboo Charcoal Bonded Grinding Wheel and Its Mechanical Properties

    NASA Astrophysics Data System (ADS)

    Li, Wei; Xu, Minjie; Zhan, Fangyong; Jin, Mingsheng

    2014-08-01

    In this paper, a new type of grinding wheel and its manufacturing production process are introduced. The new BCB (Bamboo Charcoal Bond) grinding wheel was made of bamboo charcoal, phenolic resin and abrasive powder with higher press and temperature. To investigate its mechanical features, such as Rockwell hardness, resistance to abrasion, and resistance to pressure, some experiments on three BCB samples with different Resin weight ratios 20%, 25%, 30%, were carried out. The results showed that the BCB sample with proper moulding process and Resin weight ratio had better performance.

  18. The charcoal trap: Miombo forests and the energy needs of people

    PubMed Central

    2011-01-01

    Background This study evaluates the carbon dioxide and other greenhouse gas fluxes to the atmosphere resulting from charcoal production in Zambia. It combines new biomass and flux data from a study, that was conducted in a miombo woodland within the Kataba Forest Reserve in the Western Province of Zambia, with data from other studies. Results The measurements at Kataba compared protected area (3 plots) with a highly disturbed plot outside the forest reserve and showed considerably reduced biomass after logging for charcoal production. The average aboveground biomass content of the reserve (Plots 2-4) was around 150 t ha-1, while the disturbed plot only contained 24 t ha-1. Soil carbon was not reduced significantly in the disturbed plot. Two years of eddy covariance measurements resulted in net ecosystem exchange values of -17 ± 31 g C m-2 y-1, in the first and 90 ± 16 g C m-2 in the second year. Thus, on the basis of these two years of measurement, there is no evidence that the miombo woodland at Kataba represents a present-day carbon sink. At the country level, it is likely that deforestation for charcoal production currently leads to a per capita emission rate of 2 - 3 t CO2 y-1. This is due to poor forest regeneration, although the resilience of miombo woodlands is high. Better post-harvest management could change this situation. Conclusions We argue that protection of miombo woodlands has to account for the energy demands of the population. The production at national scale that we estimated converts into 10,000 - 15,000 GWh y-1 of energy in the charcoal. The term "Charcoal Trap" we introduce, describes the fact that this energy supply has to be substituted when woodlands are protected. One possible solution, a shift in energy supply from charcoal to electricity, would reduce the pressure of forests but requires high investments into grid and power generation. Since Zambia currently cannot generate this money by itself, the country will remain locked in the

  19. Decolorization of indigo carmine by charcoal from extracted residue of coffee beans.

    PubMed

    Nakamura, Takeo; Hirata, Mizuho; Kawasaki, Naohito; Tanada, Seiki; Tamura, Takamichi; Nakahori, Yutaka

    2003-03-01

    The adsorption ability of charcoal from extracted residue of coffee beans for indigo carmine removal was investigated by the batch method. Differences in the removal ratio and removal rate of indigo carmine could be explained by differences in the properties of charcoal. In the relationship between the amount of indigo carmine adsorbed and the square root of elapsed time, a good linearity was recognized. Since the relationship between the amount of indigo carmine adsorbed and square root of elapsed time showed a good linearity, the intraparticle diffusion of indigo carmine onto pores of adsorbents was identified as the rate-limiting step in the adsorption process. PMID:12680583

  20. Holocene Fire History of an Eastern Oregon Forest Based on Soil Charcoal Radiocarbon Dates

    NASA Astrophysics Data System (ADS)

    Carson, R. J.; Malkemus, D.; Clifton, C. F.

    2006-12-01

    Limited research has been done on long-term forest fire histories in northeastern Oregon. As part of an investigation to determine the minimum age of a 300 ha landslide in the Blue Mountains, a pit was excavated near the toe of the slide. The pit, located in a depression between the landslide and a ridge, contains massive clays and silts, and an 8000-year sequence of forest fires recorded in 7 buried charcoal layers. Eight- thousand-year-old Mazama Ash (Crater Lake, Oregon) is common in the area, but no tephra was found in the excavation. The upper 17 cm is organic rich soil. Seven horizons of charcoal are present; the upper six are subhorizontal and occur at depths of 17, 36, 41, 46, 52, and 57 cm. The lowest charcoal horizon follows a disconformity that cuts diagonally across the pit from 85 to 125 cm below the surface; oxidation in the form of orange mottling occurs above this disconformity (interpreted to be a paleoslope) and is prominent below it. The charcoal horizons provide evidence of large-scale forest fires in the vicinity, with differing intensities represented by the amount of charcoal in each horizon. The layers vary in thickness from 2 to 6 cm. Five charcoal horizons were radiocarbon dated (AMS) and calendar calibrated. The charcoal at the base of the soil (at 17 cm) provided an age of AD 1670 to 1960; this horizon correlates with widespread fires in the Blue Mountains in AD 1855. The horizon second closest to the surface (at 36 cm) provided an age of 1310 ± 40 B.P. The thickest horizon (at 46 cm) yielded an age of 2420 ± 40 B.P. The lowest horizontal horizon (at 57 cm) provided an age of 3460 ± 40 B.P. The lowest charcoal (at the disconformity) yielded an age of 7990 ± 40 B.P. Based on radiocarbon dates, the mean rate of sedimentation in the closed depression is approximately 1.2 cm/century. Fire episodes (which correspond remarkably well with a lake core site approximately 150 km south), indicate relatively long periods (from 400 to over 4000