Science.gov

Sample records for activation energy calculated

  1. Removing the barrier to the calculation of activation energies

    NASA Astrophysics Data System (ADS)

    Mesele, Oluwaseun O.; Thompson, Ward H.

    2016-10-01

    Approaches for directly calculating the activation energy for a chemical reaction from a simulation at a single temperature are explored with applications to both classical and quantum systems. The activation energy is obtained from a time correlation function that can be evaluated from the same molecular dynamics trajectories or quantum dynamics used to evaluate the rate constant itself and thus requires essentially no extra computational work.

  2. Calculating activation energies for temperature compensation in circadian rhythms

    NASA Astrophysics Data System (ADS)

    Bodenstein, C.; Heiland, I.; Schuster, S.

    2011-10-01

    Many biological species possess a circadian clock, which helps them anticipate daily variations in the environment. In the absence of external stimuli, the rhythm persists autonomously with a period of approximately 24 h. However, single pulses of light, nutrients, chemicals or temperature can shift the clock phase. In the case of light- and temperature-cycles, this allows entrainment of the clock to cycles of exactly 24 h. Circadian clocks have the remarkable property of temperature compensation, that is, the period of the circadian rhythm remains relatively constant within a physiological range of temperatures. For several organisms, temperature-regulated processes within the circadian clock have been identified in recent years. However, how these processes contribute to temperature compensation is not fully understood. Here, we theoretically investigate temperature compensation in general oscillatory systems. It is known that every oscillator can be locally temperature compensated around a reference temperature, if reactions are appropriately balanced. A balancing is always possible if the control coefficient with respect to the oscillation period of at least one reaction in the oscillator network is positive. However, for global temperature compensation, the whole physiological temperature range is relevant. Here, we use an approach which leads to an optimization problem subject to the local balancing principle. We use this approach to analyse different circadian clock models proposed in the literature and calculate activation energies that lead to temperature compensation.

  3. The calculation of surface orbital energies for specific types of active sites on dispersed metal catalysts

    SciTech Connect

    Augustine, R.L.; Lahanas, K.M.; Cole, F.

    1992-11-01

    An angular overlap calculation has been used to determine the s, p, and d orbital energy levels of the different types of surface sites present on dispersed metal catalysts. These data can permit a Frontier Molecular Orbital treatment of specific site activities as long as the surface orbital availability for overlap with adsorbed substrates is considered along with its energy value and symmetry.

  4. The calculation of surface orbital energies for specific types of active sites on dispersed metal catalysts

    SciTech Connect

    Augustine, R.L.; Lahanas, K.M.; Cole, F.

    1992-01-01

    An angular overlap calculation has been used to determine the s, p, and d orbital energy levels of the different types of surface sites present on dispersed metal catalysts. These data can permit a Frontier Molecular Orbital treatment of specific site activities as long as the surface orbital availability for overlap with adsorbed substrates is considered along with its energy value and symmetry.

  5. Calculation of activation energies for hydrogen-atom abstractions by radicals containing carbon triple bonds

    NASA Technical Reports Server (NTRS)

    Brown, R. L.; Laufer, A. H.

    1981-01-01

    Activation energies are calculated by the bond-energy-bond-order (BEBO) and the bond-strength-bond-length (BSBL) methods for the reactions of C2H radicals with H2, CH4, and C2H6 and for the reactions of CN radicals with H2 and CH4. The BSBL technique accurately predicts the activation energies for these reactions while the BEBO method yields energies averaging 9 kcal higher than those observed. A possible reason for the disagreement is considered.

  6. CALCULATING ENERGY STORAGE DUE TO TOPOLOGICAL CHANGES IN EMERGING ACTIVE REGION NOAA AR 11112

    SciTech Connect

    Tarr, Lucas; Longcope, Dana

    2012-04-10

    The minimum current corona model provides a way to estimate stored coronal energy using the number of field lines connecting regions of positive and negative photospheric flux. This information is quantified by the net flux connecting pairs of opposing regions in a connectivity matrix. Changes in the coronal magnetic field, due to processes such as magnetic reconnection, manifest themselves as changes in the connectivity matrix. However, the connectivity matrix will also change when flux sources emerge or submerge through the photosphere, as often happens in active regions. We have developed an algorithm to estimate the changes in flux due to emergence and submergence of magnetic flux sources. These estimated changes must be accounted for in order to quantify storage and release of magnetic energy in the corona. To perform this calculation over extended periods of time, we must additionally have a consistently labeled connectivity matrix over the entire observational time span. We have therefore developed an automated tracking algorithm to generate a consistent connectivity matrix as the photospheric source regions evolve over time. We have applied this method to NOAA Active Region 11112, which underwent a GOES M2.9 class flare around 19:00 on 2010 October 16th, and calculated a lower bound on the free magnetic energy buildup of {approx}8.25 Multiplication-Sign 10{sup 30} erg over 3 days.

  7. Density Functional Theory Calculations of Activation Energies for Carrier Capture by Defects in Semiconductors

    NASA Astrophysics Data System (ADS)

    Modine, N. A.; Wright, A. F.; Lee, S. R.

    The rate of defect-induced carrier recombination is determined by both defect levels and carrier capture cross-sections. Density functional theory (DFT) has been widely and successfully used to predict defect levels, but only recently has work begun to focus on using DFT to determine carrier capture cross-sections. Lang and Henry developed the theory of carrier-capture by multiphonon emission in the 1970s and showed that carrier-capture cross-sections differ between defects primarily due to differences in their carrier capture activation energies. We present an approach to using DFT to calculate carrier capture activation energies that does not depend on an assumed configuration coordinate and that fully accounts for anharmonic effects, which can substantially modify carrier activation energies. We demonstrate our approach for intrinisic defects in GaAs and GaN and discuss how our results depend on the choice of exchange-correlation functional and the treatment of spin polarization. Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under Contract DE-AC04-94AL85000.

  8. Calculator-Active Materials.

    ERIC Educational Resources Information Center

    Crow, Tracy, Ed.; Harris, Julia, Ed.

    1997-01-01

    This journal contains brief descriptions of calculator-active materials that were found using Resource Finder, the searchable online catalog of curriculum resources from the Eisenhower National Clearinghouse (ENC). It features both the calculators themselves and the activity books that are used with them. Among the calculators included are those…

  9. TI-73 Calculator Activities

    ERIC Educational Resources Information Center

    Phillips-Bey, Carol K.

    2004-01-01

    This article describes TI-73 calculator activities appropriate for middle school students. It was found that the use of the calculator allowed for higher-level thinking and a richer exploration of mathematical ideas by students. [Included with this article are "Dice Roll Worksheet" and "Transforming Tree Worksheet".] (Contains 9 figures.)

  10. Calculating Transition Energy Barriers and Characterizing Activation States for Steps of Fusion.

    PubMed

    Ryham, Rolf J; Klotz, Thomas S; Yao, Lihan; Cohen, Fredric S

    2016-03-01

    We use continuum mechanics to calculate an entire least energy pathway of membrane fusion, from stalk formation, to pore creation, and through fusion pore enlargement. The model assumes that each structure in the pathway is axially symmetric. The static continuum stalk structure agrees quantitatively with experimental stalk architecture. Calculations show that in a stalk, the distal monolayer is stretched and the stored stretching energy is significantly less than the tilt energy of an unstretched distal monolayer. The string method is used to determine the energy of the transition barriers that separate intermediate states and the dynamics of two bilayers as they pass through them. Hemifusion requires a small amount of energy independently of lipid composition, while direct transition from a stalk to a fusion pore without a hemifusion intermediate is highly improbable. Hemifusion diaphragm expansion is spontaneous for distal monolayers containing at least two lipid components, given sufficiently negative diaphragm spontaneous curvature. Conversely, diaphragms formed from single-component distal monolayers do not expand without the continual injection of energy. We identify a diaphragm radius, below which central pore expansion is spontaneous. For larger diaphragms, prior studies have shown that pore expansion is not axisymmetric, and here our calculations supply an upper bound for the energy of the barrier against pore formation. The major energy-requiring deformations in the steps of fusion are: widening of a hydrophobic fissure in bilayers for stalk formation, splay within the expanding hemifusion diaphragm, and fissure widening initiating pore formation in a hemifusion diaphragm.

  11. Calculating Transition Energy Barriers and Characterizing Activation States for Steps of Fusion.

    PubMed

    Ryham, Rolf J; Klotz, Thomas S; Yao, Lihan; Cohen, Fredric S

    2016-03-01

    We use continuum mechanics to calculate an entire least energy pathway of membrane fusion, from stalk formation, to pore creation, and through fusion pore enlargement. The model assumes that each structure in the pathway is axially symmetric. The static continuum stalk structure agrees quantitatively with experimental stalk architecture. Calculations show that in a stalk, the distal monolayer is stretched and the stored stretching energy is significantly less than the tilt energy of an unstretched distal monolayer. The string method is used to determine the energy of the transition barriers that separate intermediate states and the dynamics of two bilayers as they pass through them. Hemifusion requires a small amount of energy independently of lipid composition, while direct transition from a stalk to a fusion pore without a hemifusion intermediate is highly improbable. Hemifusion diaphragm expansion is spontaneous for distal monolayers containing at least two lipid components, given sufficiently negative diaphragm spontaneous curvature. Conversely, diaphragms formed from single-component distal monolayers do not expand without the continual injection of energy. We identify a diaphragm radius, below which central pore expansion is spontaneous. For larger diaphragms, prior studies have shown that pore expansion is not axisymmetric, and here our calculations supply an upper bound for the energy of the barrier against pore formation. The major energy-requiring deformations in the steps of fusion are: widening of a hydrophobic fissure in bilayers for stalk formation, splay within the expanding hemifusion diaphragm, and fissure widening initiating pore formation in a hemifusion diaphragm. PMID:26958888

  12. CALCULATING SEPARATE MAGNETIC FREE ENERGY ESTIMATES FOR ACTIVE REGIONS PRODUCING MULTIPLE FLARES: NOAA AR11158

    SciTech Connect

    Tarr, Lucas; Longcope, Dana; Millhouse, Margaret

    2013-06-10

    It is well known that photospheric flux emergence is an important process for stressing coronal fields and storing magnetic free energy, which may then be released during a flare. The Helioseismic and Magnetic Imager (HMI) on board the Solar Dynamics Observatory (SDO) captured the entire emergence of NOAA AR 11158. This region emerged as two distinct bipoles, possibly connected underneath the photosphere, yet characterized by different photospheric field evolutions and fluxes. The combined active region complex produced 15 GOES C-class, two M-class, and the X2.2 Valentine's Day Flare during the four days after initial emergence on 2011 February 12. The M and X class flares are of particular interest because they are nonhomologous, involving different subregions of the active region. We use a Magnetic Charge Topology together with the Minimum Current Corona model of the coronal field to model field evolution of the complex. Combining this with observations of flare ribbons in the 1600 A channel of the Atmospheric Imaging Assembly on board SDO, we propose a minimization algorithm for estimating the amount of reconnected flux and resulting drop in magnetic free energy during a flare. For the M6.6, M2.2, and X2.2 flares, we find a flux exchange of 4.2 Multiplication-Sign 10{sup 20} Mx, 2.0 Multiplication-Sign 10{sup 20} Mx, and 21.0 Multiplication-Sign 10{sup 20} Mx, respectively, resulting in free energy drops of 3.89 Multiplication-Sign 10{sup 30} erg, 2.62 Multiplication-Sign 10{sup 30} erg, and 1.68 Multiplication-Sign 10{sup 32} erg.

  13. Accurate and efficient calculation of excitation energies with the active-space particle-particle random phase approximation

    NASA Astrophysics Data System (ADS)

    Zhang, Du; Yang, Weitao

    2016-10-01

    An efficient method for calculating excitation energies based on the particle-particle random phase approximation (ppRPA) is presented. Neglecting the contributions from the high-lying virtual states and the low-lying core states leads to the significantly smaller active-space ppRPA matrix while keeping the error to within 0.05 eV from the corresponding full ppRPA excitation energies. The resulting computational cost is significantly reduced and becomes less than the construction of the non-local Fock exchange potential matrix in the self-consistent-field (SCF) procedure. With only a modest number of active orbitals, the original ppRPA singlet-triplet (ST) gaps as well as the low-lying single and double excitation energies can be accurately reproduced at much reduced computational costs, up to 100 times faster than the iterative Davidson diagonalization of the original full ppRPA matrix. For high-lying Rydberg excitations where the Davidson algorithm fails, the computational savings of active-space ppRPA with respect to the direct diagonalization is even more dramatic. The virtues of the underlying full ppRPA combined with the significantly lower computational cost of the active-space approach will significantly expand the applicability of the ppRPA method to calculate excitation energies at a cost of O(K4), with a prefactor much smaller than a single SCF Hartree-Fock (HF)/hybrid functional calculation, thus opening up new possibilities for the quantum mechanical study of excited state electronic structure of large systems.

  14. Accurate and efficient calculation of excitation energies with the active-space particle-particle random phase approximation

    DOE PAGES

    Zhang, Du; Yang, Weitao

    2016-10-13

    An efficient method for calculating excitation energies based on the particle-particle random phase approximation (ppRPA) is presented. Neglecting the contributions from the high-lying virtual states and the low-lying core states leads to the significantly smaller active-space ppRPA matrix while keeping the error to within 0.05 eV from the corresponding full ppRPA excitation energies. The resulting computational cost is significantly reduced and becomes less than the construction of the non-local Fock exchange potential matrix in the self-consistent-field (SCF) procedure. With only a modest number of active orbitals, the original ppRPA singlet-triplet (ST) gaps as well as the low-lying single and doublemore » excitation energies can be accurately reproduced at much reduced computational costs, up to 100 times faster than the iterative Davidson diagonalization of the original full ppRPA matrix. For high-lying Rydberg excitations where the Davidson algorithm fails, the computational savings of active-space ppRPA with respect to the direct diagonalization is even more dramatic. The virtues of the underlying full ppRPA combined with the significantly lower computational cost of the active-space approach will significantly expand the applicability of the ppRPA method to calculate excitation energies at a cost of O(K^{4}), with a prefactor much smaller than a single SCF Hartree-Fock (HF)/hybrid functional calculation, thus opening up new possibilities for the quantum mechanical study of excited state electronic structure of large systems.« less

  15. Biogas - the calculable energy

    NASA Astrophysics Data System (ADS)

    Kith, Károly; Nagy, Orsolya; Balla, Zoltán; Tamás, András

    2015-04-01

    EU actions against climate change are rising energy prices, both have emphasized the use of renewable energy,increase investments and energy efficiency. A number of objectives formulated in the EC decree no. 29/2009 by 2020. This document is based on the share of renewable energies in energy consumption should be increased to 20% (EC, 2009). The EU average is 20% but the share of renewables vary from one member state to another. In Hungary in 2020, 14.65% renewable energy share is planned to be achieved. According to the latest Eurostat data, the share of renewable energy in energy consumption of the EU average was 14.1%, while in Hungary, this share was 9.6% in 2012. (EUROSTAT, 2014). The use of renewable energy plant level is influenced by several factors. The most important of these is the cost savings and efficiency gains. Hungarian investments in renewable energy production usually have high associated costs and the payback period is substantially more than five years, depending on the support rate. For example, the payback period is also influenced by the green electricity generated feed prices, which is one of the lowest in Hungary compared the Member States of the European Union. Consequently, it is important to increase the production of green energy. Nowadays, predictable biogas energy is an outstanding type of decentralized energy production. It follows directly that agricultural by-products can be used to produce energy and they also create jobs by the construction of a biogas plant. It is important to dispose of and destroy hazardous and noxious substances in energy production. It follows from this that the construction of biogas plants have a positive impact, in addition to green energy which is prepared to reduce the load on the environment. The production of biogas and green electricity is one of the most environment friendly forms of energy production. Biogas production also has other important ecological effects, such as the substitution of

  16. Activation Energy Calculations for the Portevin-Le Chatelier Effect in Nimonic 263 Superalloy

    NASA Astrophysics Data System (ADS)

    Han, G. M.; Tian, C. G.; Chu, Z. K.; Cui, C. Y.; Hu, Z. Q.; Sun, X. F.

    2015-10-01

    The Portevin-Le Chatelier (PLC) effect in the Nimonic 263 superalloy was investigated by tensile test in a wide temperature range, from room temperature to 1033 K (760 °C), and at strain rates between 0.1 and 4 × 10-4 s-1. Types A, B, and C serrations were observed depending upon the test temperatures and strain rates. The activation energy ( Q) for serrated flow was determined by employing various methodologies for T < 723 K (450 °C), where a normal PLC effect was observed. The value of Q was found to be independent of the method employed. The average Q value of 70 KJ/mol was found to be in agreement with that for diffusion of substitutional solutes such as Cr and Mo in a Ni matrix by pipe diffusion. At temperatures ranging from 723 K to 923 K (450 °C to 650 °C), type C serrations and an inverse PLC effect were noticed, which may be caused by unlocking process.

  17. Activation Energy Calculations for Formamide-TiO2 and Formamide-Pt Interactions in the Presence of Water.

    PubMed

    Dushanov, E; Kholmurodov, Kh; Yasuoka, K

    2013-01-01

    Formamide contains the four elements (C, H, O, and N) most required for life and it is attractive as a potential prebiotic starting material for nucleobase synthesis. In the presence of catalysts (for example, TiO2) and with moderate heating, formamide can pass surface energy barriers, yielding a complete set of nucleic bases and acyclonucleosides, and favoring both phosphorylations and transphosphorylations necessary for life. In the reaction mechanism, interaction with water seems to be an essential factor for the formamide molecule to function. In this paper, a formamide-water solution on a TiO$_2$ (anatase) surface is simulated using the molecular dynamics method, and activation energy calculations are performed for the temperature range of T = 250 K to T = 400 K. A correlation is established between the diffusion and density profiles for the formamide and water molecules on an anatase surface. Also, the calculated activation energies of the formamide-water-anatase and formamide-water-platinum systems are compared. A comparative analysis is performed of the behavior of formamide-water and ethanol-water interaction on the same (anatase and platinum) surfaces.

  18. Calculation of Relative Binding Free Energy in the Water-Filled Active Site of Oligopeptide-Binding Protein A.

    PubMed

    Maurer, Manuela; de Beer, Stephanie B A; Oostenbrink, Chris

    2016-01-01

    The periplasmic oligopeptide binding protein A (OppA) represents a well-known example of water-mediated protein-ligand interactions. Here, we perform free-energy calculations for three different ligands binding to OppA, using a thermodynamic integration approach. The tripeptide ligands share a high structural similarity (all have the sequence KXK), but their experimentally-determined binding free energies differ remarkably. Thermodynamic cycles were constructed for the ligands, and simulations conducted in the bound and (freely solvated) unbound states. In the unbound state, it was observed that the difference in conformational freedom between alanine and glycine leads to a surprisingly slow convergence, despite their chemical similarity. This could be overcome by increasing the softness parameter during alchemical transformations. Discrepancies remained in the bound state however, when comparing independent simulations of the three ligands. These difficulties could be traced to a slow relaxation of the water network within the active site. Fluctuations in the number of water molecules residing in the binding cavity occur mostly on a timescale larger than the simulation time along the alchemical path. After extensive simulations, relative binding free energies that were converged to within thermal noise could be obtained, which agree well with available experimental data.

  19. Calculation of Relative Binding Free Energy in the Water-Filled Active Site of Oligopeptide-Binding Protein A.

    PubMed

    Maurer, Manuela; de Beer, Stephanie B A; Oostenbrink, Chris

    2016-01-01

    The periplasmic oligopeptide binding protein A (OppA) represents a well-known example of water-mediated protein-ligand interactions. Here, we perform free-energy calculations for three different ligands binding to OppA, using a thermodynamic integration approach. The tripeptide ligands share a high structural similarity (all have the sequence KXK), but their experimentally-determined binding free energies differ remarkably. Thermodynamic cycles were constructed for the ligands, and simulations conducted in the bound and (freely solvated) unbound states. In the unbound state, it was observed that the difference in conformational freedom between alanine and glycine leads to a surprisingly slow convergence, despite their chemical similarity. This could be overcome by increasing the softness parameter during alchemical transformations. Discrepancies remained in the bound state however, when comparing independent simulations of the three ligands. These difficulties could be traced to a slow relaxation of the water network within the active site. Fluctuations in the number of water molecules residing in the binding cavity occur mostly on a timescale larger than the simulation time along the alchemical path. After extensive simulations, relative binding free energies that were converged to within thermal noise could be obtained, which agree well with available experimental data. PMID:27092480

  20. Comparison of energy calculation procedures

    SciTech Connect

    Kusuda, T.

    1981-08-01

    ASHRAE has developed a simplified energy-calculation procedure suitable for small calculators that applied to nonresidential buildings and includes all the essential calculation elements - climatic data, buildings construction, operational characteristics, utility system and equipment performance, and internal heat gain due to lighting, occupancy, cooking, etc. A comparison of the results predicted by the proposed method for four typical HVAC (heating, ventilation, and air conditioning) systems in an office building in Washington, DC, against the predictions of seven detailed computer-simulation programs - AXCESS, BLAST, BLDSIM, DOE-2, E-CUBE, ESAS, and TRACE - revealed that the similarity of the results depended more on which analyst employed the methods than on which methods were used.

  1. ACTIVE: a program to calculate and plot reaction rates from ANISN calculated fluxes

    SciTech Connect

    Judd, J.L.

    1981-12-01

    The ACTIVE code calculates spatial heating rates, tritium production rates, neutron reaction rates, and energy spectra from particle fluxes calculated by ANISN. ACTIVE has a variety of input options including the capability to plot all calculated spatial distributions. The code was primarily designed for use with fusion first wall/blanket systems, but could be applied to any one-dimensional problem.

  2. Combining active-space coupled-cluster methods with moment energy corrections via the CC(P;Q) methodology, with benchmark calculations for biradical transition states.

    PubMed

    Shen, Jun; Piecuch, Piotr

    2012-04-14

    We have recently suggested the CC(P;Q) methodology that can correct energies obtained in the active-space coupled-cluster (CC) or equation-of-motion (EOM) CC calculations, which recover much of the nondynamical and some dynamical electron correlation effects, for the higher-order, mostly dynamical, correlations missing in the active-space CC/EOMCC considerations. It is shown that one can greatly improve the description of biradical transition states, both in terms of the resulting energy barriers and total energies, by combining the CC approach with singles, doubles, and active-space triples, termed CCSDt, with the CC(P;Q)-style correction due to missing triple excitations defining the CC(t;3) approximation.

  3. Benchmark test of neutron transport calculations: indium, nickel, gold, europium, and cobalt activation with and without energy moderated fission neutrons by iron simulating the Hiroshima atomic bomb casing.

    PubMed

    Iwatani, K; Hoshi, M; Shizuma, K; Hiraoka, M; Hayakawa, N; Oka, T; Hasai, H

    1994-10-01

    A benchmark test of the Monte Carlo neutron and photon transport code system (MCNP) was performed using a bare- and energy-moderated 252Cf fission neutron source which was obtained by transmission through 10-cm-thick iron. An iron plate was used to simulate the effect of the Hiroshima atomic bomb casing. This test includes the activation of indium and nickel for fast neutrons and gold, europium, and cobalt for thermal and epithermal neutrons, which were inserted in the moderators. The latter two activations are also to validate 152Eu and 60Co activity data obtained from the atomic bomb-exposed specimens collected at Hiroshima and Nagasaki, Japan. The neutron moderators used were Lucite and Nylon 6 and the total thickness of each moderator was 60 cm or 65 cm. Measured activity data (reaction yield) of the neutron-irradiated detectors in these moderators decreased to about 1/1,000th or 1/10,000th, which corresponds to about 1,500 m ground distance from the hypocenter in Hiroshima. For all of the indium, nickel, and gold activity data, the measured and calculated values agreed within 25%, and the corresponding values for europium and cobalt were within 40%. From this study, the MCNP code was found to be accurate enough for the bare- and energy-moderated 252Cf neutron activation calculations of these elements using moderators containing hydrogen, carbon, nitrogen, and oxygen. PMID:8083048

  4. Benchmark test of neutron transport calculations: Indium, nickel, gold, europium, and cobalt activation with and without energy moderated fission neutrons by iron simulating the Hiroshima atomic bomb casing

    SciTech Connect

    Iwatani, Kazuo; Shizuma, Kiyoshi; Hasai, Hiromi; Hoshi, Masaharu; Hiraoka, Masayuki; Hayakawa, Norihiko; Oka, Takamitsu

    1994-10-01

    A benchmark test of the Monte Carlo neutron and photon transport code system (MCNP) was performed using a bare- and energy-moderated {sup 252}Cf fission neutron source which was obtained by transmission through 10-cm-thick iron. An iron plate was used to simulate the effect of the Hiroshima atomic bomb casing. This test includes the activation of indium and nickel for fast neutrons and gold, europium, and cobalt for thermal and epithermal neutrons, which were inserted in the moderators. The latter two activations are also to validate {sup 152}Eu and {sup 60}Co activity data obtained from the atomic bomb-exposed specimens collected at Hiroshima and Nagasaki, Japan. The neutron moderators used were Lucite and Nylon 6 and the total thickness of each moderator was 60 cm or 65 cm. Measured activity data (reaction yield) of the neutron-irradiated detectors in these moderators decreased to about 1/1,000th or 1/10,000th, which corresponds to about 1,500 m ground distance from the hypocenter in Hiroshima. For all of the indium, nickel, and gold activity data, the measured and calculated values agreed within 25%, and the corresponding values for europium and cobalt were within 40%. From this study, the MCNP code was found to be accurate enough for the bare- and energy-moderated {sup 252}Cf neutron activation calculations of these elements using moderators containing hydrogen, carbon, nitrogen, and oxygen. 18 refs., 10 figs., 4 tabs.

  5. Benchmark test of neutron transport calculations: indium, nickel, gold, europium, and cobalt activation with and without energy moderated fission neutrons by iron simulating the Hiroshima atomic bomb casing.

    PubMed

    Iwatani, K; Hoshi, M; Shizuma, K; Hiraoka, M; Hayakawa, N; Oka, T; Hasai, H

    1994-10-01

    A benchmark test of the Monte Carlo neutron and photon transport code system (MCNP) was performed using a bare- and energy-moderated 252Cf fission neutron source which was obtained by transmission through 10-cm-thick iron. An iron plate was used to simulate the effect of the Hiroshima atomic bomb casing. This test includes the activation of indium and nickel for fast neutrons and gold, europium, and cobalt for thermal and epithermal neutrons, which were inserted in the moderators. The latter two activations are also to validate 152Eu and 60Co activity data obtained from the atomic bomb-exposed specimens collected at Hiroshima and Nagasaki, Japan. The neutron moderators used were Lucite and Nylon 6 and the total thickness of each moderator was 60 cm or 65 cm. Measured activity data (reaction yield) of the neutron-irradiated detectors in these moderators decreased to about 1/1,000th or 1/10,000th, which corresponds to about 1,500 m ground distance from the hypocenter in Hiroshima. For all of the indium, nickel, and gold activity data, the measured and calculated values agreed within 25%, and the corresponding values for europium and cobalt were within 40%. From this study, the MCNP code was found to be accurate enough for the bare- and energy-moderated 252Cf neutron activation calculations of these elements using moderators containing hydrogen, carbon, nitrogen, and oxygen.

  6. Calculation of water activation for the LHC

    NASA Astrophysics Data System (ADS)

    Vollaire, Joachim; Brugger, Markus; Forkel-Wirth, Doris; Roesler, Stefan; Vojtyla, Pavol

    2006-06-01

    The management of activated water in the Large Hadron Collider (LHC) at CERN is a key concern for radiation protection. For this reason, the induced radioactivity of the different water circuits is calculated using the Monte-Carlo (MC) code FLUKA. The results lead to the definition of procedures to be taken into account during the repair and maintenance of the machine, as well as to measures being necessary for a release of water into the environment. In order to assess the validity of the applied methods, a benchmark experiment was carried out at the CERN-EU High Energy Reference Field (CERF) facility, where a hadron beam (120 GeV) is impinging on a copper target. Four samples of water, as used at the LHC, and different in their chemical compositions, were irradiated near the copper target. In addition to the tritium activity measured with a liquid scintillation counter, the samples were also analyzed using gamma spectroscopy in order to determine the activity of the gamma emitting isotopes such as Be7 and Na24. While for the latter an excellent agreement between simulation and measurement was found, for the calculation of tritium a correction factor is derived to be applied for future LHC calculations in which the activity is calculated by direct scoring of produced nuclei. A simplified geometry representing the LHC Arc sections is then used to evaluate the different calculation methods with FLUKA. By comparing these methods and by taking into account the benchmark results, a strategy for the environmental calculations can be defined.

  7. Why does the G117H mutation considerably improve the activity of human butyrylcholinesterase against sarin? Insights from quantum mechanical/molecular mechanical free energy calculations.

    PubMed

    Yao, Yuan; Liu, Junjun; Zhan, Chang-Guo

    2012-11-01

    Human butyrylcholinesterase (BChE) is recognized as the most promising bioscavenger for organophosphorus (OP) warfare nerve agents. The G117H mutant of human BChE has been identified as a potential catalytic bioscavenger with a remarkably improved activity against OP nerve agents such as sarin, but it still does not satisfy the clinical use. For further design of the higher-activity mutants against OP nerve agents, it is essential to understand how the G117H mutation improves the activity. The reaction mechanisms and the free energy profiles for spontaneous reactivation of wild-type BChE and its G117H mutant phosphorylated by sarin have been explored, in this study, by performing first-principles quantum mechanical/molecular mechanical free energy calculations, and the remarkable role of the G117H mutation on the activity has been elucidated. For both the wild-type and G117H mutant enzymes, H438 acts as a general base to initiate the spontaneous reactivation that consists of two reaction steps: the nucleophilic attack at the phosphorus by a water molecule and decomposition of the pentacoordinated phosphorus intermediate. The calculated overall free energy barriers, i.e., 30.2 and 23.9 kcal/mol for the wild type and G117H mutant, respectively, are in good agreement with available experimental kinetic data. On the basis of the calculated results, the mutated residue (H117 in the G117H mutant) cannot initiate the spontaneous reactivation as a general base. Instead, it skews the oxyanion hole and makes the phosphorus more open to the nucleophilic water molecule, resulting in a remarkable change in the rate-determining step and significantly improved catalytic activity of human BChE. PMID:23092211

  8. Mathematical Creative Activity and the Graphic Calculator

    ERIC Educational Resources Information Center

    Duda, Janina

    2011-01-01

    Teaching mathematics using graphic calculators has been an issue of didactic discussions for years. Finding ways in which graphic calculators can enrich the development process of creative activity in mathematically gifted students between the ages of 16-17 is the focus of this article. Research was conducted using graphic calculators with…

  9. Accurate free energy calculation along optimized paths.

    PubMed

    Chen, Changjun; Xiao, Yi

    2010-05-01

    The path-based methods of free energy calculation, such as thermodynamic integration and free energy perturbation, are simple in theory, but difficult in practice because in most cases smooth paths do not exist, especially for large molecules. In this article, we present a novel method to build the transition path of a peptide. We use harmonic potentials to restrain its nonhydrogen atom dihedrals in the initial state and set the equilibrium angles of the potentials as those in the final state. Through a series of steps of geometrical optimization, we can construct a smooth and short path from the initial state to the final state. This path can be used to calculate free energy difference. To validate this method, we apply it to a small 10-ALA peptide and find that the calculated free energy changes in helix-helix and helix-hairpin transitions are both self-convergent and cross-convergent. We also calculate the free energy differences between different stable states of beta-hairpin trpzip2, and the results show that this method is more efficient than the conventional molecular dynamics method in accurate free energy calculation.

  10. Good Practices in Free-energy Calculations

    NASA Technical Reports Server (NTRS)

    Pohorille, Andrew; Jarzynski, Christopher; Chipot, Christopher

    2013-01-01

    As access to computational resources continues to increase, free-energy calculations have emerged as a powerful tool that can play a predictive role in drug design. Yet, in a number of instances, the reliability of these calculations can be improved significantly if a number of precepts, or good practices are followed. For the most part, the theory upon which these good practices rely has been known for many years, but often overlooked, or simply ignored. In other cases, the theoretical developments are too recent for their potential to be fully grasped and merged into popular platforms for the computation of free-energy differences. The current best practices for carrying out free-energy calculations will be reviewed demonstrating that, at little to no additional cost, free-energy estimates could be markedly improved and bounded by meaningful error estimates. In energy perturbation and nonequilibrium work methods, monitoring the probability distributions that underlie the transformation between the states of interest, performing the calculation bidirectionally, stratifying the reaction pathway and choosing the most appropriate paradigms and algorithms for transforming between states offer significant gains in both accuracy and precision. In thermodynamic integration and probability distribution (histogramming) methods, properly designed adaptive techniques yield nearly uniform sampling of the relevant degrees of freedom and, by doing so, could markedly improve efficiency and accuracy of free energy calculations without incurring any additional computational expense.

  11. Release of halide ions from the buried active site of the haloalkane dehalogenase LinB revealed by stopped-flow fluorescence analysis and free energy calculations.

    PubMed

    Hladilkova, Jana; Prokop, Zbynek; Chaloupkova, Radka; Damborsky, Jiri; Jungwirth, Pavel

    2013-11-21

    Release of halide ions is an essential step of the catalytic cycle of haloalkane dehalogenases. Here we describe experimentally and computationally the process of release of a halide anion from the buried active site of the haloalkane dehalogenase LinB. Using stopped-flow fluorescence analysis and umbrella sampling free energy calculations, we show that the anion binding is ion-specific and follows the ordering I(-) > Br(-) > Cl(-). We also address the issue of the protonation state of the catalytic His272 residue and its effect on the process of halide release. While deprotonation of His272 increases binding of anions in the access tunnel, we show that the anionic ordering does not change with the switch of the protonation state. We also demonstrate that a sodium cation could relatively easily enter the active site, provided the His272 residue is singly protonated, and replace thus the missing proton. In contrast, Na(+) is strongly repelled from the active site containing the doubly protonated His272 residue. Our study contributes toward understanding of the reaction mechanism of haloalkane dehalogenase enzyme family. Determination of the protonation state of the catalytic histidine throughout the catalytic cycle remains a challenge for future studies.

  12. Large Numbers and Calculators: A Classroom Activity.

    ERIC Educational Resources Information Center

    Arcavi, Abraham; Hadas, Nurit

    1989-01-01

    Described is an activity demonstrating how a scientific calculator can be used in a mathematics classroom to introduce new content while studying a conventional topic. Examples of reading and writing large numbers, and reading hidden results are provided. (YP)

  13. Energy and mass balance calculations for incinerators

    SciTech Connect

    Lee, C.C.; Huffman, G.L.

    1998-01-01

    Calculation of energy and mass balance within an incinerator is a very important part of designing and/or evaluating the incineration process. This article describes a simple computer model used to calculate an energy and mass balance for a rotary kiln incinerator. The main purpose of the model is to assist US Environmental Protection Agency (EPA) permit writers in evaluating the adequacy of the data submitted by applicants seeking incinerator permits. The calculation is based on the assumption that a thermodynamic equilibrium condition exits within the combustion chamber. Key parameters that the model can calculate include theoretical combustion air, excess air needed for actual combustion cases, flue gas flow rate, and exit temperature.

  14. Total energy calculations and bonding at interfaces

    SciTech Connect

    Louie, S.G.

    1984-08-01

    Some of the concepts and theoretical techniques employed in recent ab initio studies of the electronic and structural properties of surfaces and interfaces are discussed. Results of total energy calculations for the 2 x 1 reconstructed diamond (111) surface and for stacking faults in Si are reviewed. 30 refs., 8 figs.

  15. Calculating Free Energies Using Average Force

    NASA Technical Reports Server (NTRS)

    Darve, Eric; Pohorille, Andrew; DeVincenzi, Donald L. (Technical Monitor)

    2001-01-01

    A new, general formula that connects the derivatives of the free energy along the selected, generalized coordinates of the system with the instantaneous force acting on these coordinates is derived. The instantaneous force is defined as the force acting on the coordinate of interest so that when it is subtracted from the equations of motion the acceleration along this coordinate is zero. The formula applies to simulations in which the selected coordinates are either unconstrained or constrained to fixed values. It is shown that in the latter case the formula reduces to the expression previously derived by den Otter and Briels. If simulations are carried out without constraining the coordinates of interest, the formula leads to a new method for calculating the free energy changes along these coordinates. This method is tested in two examples - rotation around the C-C bond of 1,2-dichloroethane immersed in water and transfer of fluoromethane across the water-hexane interface. The calculated free energies are compared with those obtained by two commonly used methods. One of them relies on determining the probability density function of finding the system at different values of the selected coordinate and the other requires calculating the average force at discrete locations along this coordinate in a series of constrained simulations. The free energies calculated by these three methods are in excellent agreement. The relative advantages of each method are discussed.

  16. Monte Carlo algorithm for free energy calculation.

    PubMed

    Bi, Sheng; Tong, Ning-Hua

    2015-07-01

    We propose a Monte Carlo algorithm for the free energy calculation based on configuration space sampling. An upward or downward temperature scan can be used to produce F(T). We implement this algorithm for the Ising model on a square lattice and triangular lattice. Comparison with the exact free energy shows an excellent agreement. We analyze the properties of this algorithm and compare it with the Wang-Landau algorithm, which samples in energy space. This method is applicable to general classical statistical models. The possibility of extending it to quantum systems is discussed.

  17. Bond-Energy and Surface-Energy Calculations in Metals

    ERIC Educational Resources Information Center

    Eberhart, James G.; Horner, Steve

    2010-01-01

    A simple technique appropriate for introductory materials science courses is outlined for the calculation of bond energies in metals from lattice energies. The approach is applied to body-centered cubic (bcc), face-centered cubic (fcc), and hexagonal-closest-packed (hcp) metals. The strength of these bonds is tabulated for a variety metals and is…

  18. Hermes III endpoint energy calculation from photonuclear activation of 197Au and 58Ni foils

    SciTech Connect

    Parzyck, Christopher Thomas

    2014-09-01

    A new process has been developed to characterize the endpoint energy of HERMES III on a shot-to-shot basis using standard dosimetry tools from the Sandia Radiation Measurements Laboratory. Photonuclear activation readings from nickel and gold foils are used in conjunction with calcium fluoride thermoluminescent dosimeters to derive estimated electron endpoint energies for a series of HERMES shots. The results are reasonably consistent with the expected endpoint voltages on those shots.

  19. Activation Energy

    NASA Technical Reports Server (NTRS)

    Gadeken, Owen

    2002-01-01

    Teaming is so common in today's project management environment that most of us assume it comes naturally. We further assume that when presented with meaningful and challenging work, project teams will naturally engage in productive activity to complete their tasks. This assumption is expressed in the simple (but false) equation: Team + Work = Teamwork. Although this equation appears simple and straightforward, it is far from true for most project organizations whose reality is a complex web of institutional norms based on individual achievement and rewards. This is illustrated by the very first successful team experience from my early Air Force career. As a young lieutenant, I was sent to Squadron Officer School, which was the first in the series of Air Force professional military education courses I was required to complete during my career. We were immediately formed into teams of twelve officers. Much of the course featured competition between these teams. As the most junior member of my team, I quickly observed the tremendous pressure to show individual leadership capability. At one point early in the course, almost everyone in our group was vying to become the team leader. This conflict was so intense that it caused us to fail miserably in our first outdoor team building exercise. We spent so much time fighting over leadership that we were unable to complete any of the events on the outdoor obstacle course. This complete lack of success was so disheartening to me that I gave our team little hope for future success. What followed was a very intense period of bickering, conflict, and even shouting matches as our dysfunctional team tried to cope with our early failures and find some way to succeed. British physician and researcher Wilfred Bion (Experiences in Groups, 1961) discovered that there are powerful psychological forces inherent in all groups that divert from accomplishing their primary tasks. To overcome these restraining forces and use the potential

  20. Free-Energy Calculations. A Mathematical Perspective

    NASA Technical Reports Server (NTRS)

    Pohorille, Andrzej

    2015-01-01

    conductance, defined as the ratio of ionic current through the channel to applied voltage, can be calculated in MD simulations by way of applying an external electric field to the system and counting the number of ions that traverse the channel per unit time. If the current is small, a voltage significantly higher than the experimental one needs to be applied to collect sufficient statistics of ion crossing events. Then, the calculated conductance has to be extrapolated to the experimental voltage using procedures of unknown accuracy. Instead, we propose an alternative approach that applies if ion transport through channels can be described with sufficient accuracy by the one-dimensional diffusion equation in the potential given by the free energy profile and applied voltage. Then, it is possible to test the assumptions of the equation, recover the full voltage/current dependence, determine the reliability of the calculated conductance and reconstruct the underlying (equilibrium) free energy profile, all from MD simulations at a single voltage. We will present the underlying theory, model calculations that test this theory and simulations on ion conductance through a channel that has been extensively studied experimentally. To our knowledge this is the first case in which the complete, experimentally measured dependence of the current on applied voltage has been reconstructed from MD simulations.

  1. Low-energy calculations for nuclear photodisintegration

    NASA Astrophysics Data System (ADS)

    Deflorian, S.; Efros, V. D.; Leidemann, W.

    2016-03-01

    In the Standard Solar Model a central role in the nucleosynthesis is played by reactions of the kind {}{Z_1}{A_1}{X_1} + {}{Z_2}{A_2}{X_2} to {}{Z_1 + {Z_2}}{A_1 + {A_2}}Y + γ , which enter the proton-proton chains. These reactions can also be studied through the inverse photodisintegration reaction. One option is to use the Lorentz Integral Transform approach, which transforms the continuum problem into a bound state-like one. A way to check the reliability of such methods is a direct calculation, for example using the Kohn Variational Principle to obtain the scattering wave function and then directly calculate the response function of the reaction.

  2. Free energy calculations of gramicidin dimer dissociation.

    PubMed

    Wanasundara, Surajith N; Krishnamurthy, Vikram; Chung, Shin-Ho

    2011-11-24

    Molecular dynamics simulations, combined with umbrella sampling, is used to study how gramicidin A (gA) dimers dissociate in the lipid bilayer. The potential of mean force and intermolecular potential energy are computed as functions of the distance between center of masses of the two gA monomers in two directions of separation: parallel to the bilayer surface and parallel to the membrane normal. Results from this study show that the dissociation of gA dimers occurs via lateral displacement of gA monomers followed by tilting of dimers with respect to the lipid bilayer normal. It is found that the dissociation energy of gA dimers in the dimyristoylphosphatidylcholine bilayer is 14 kcal mol(-1) (~22 kT), which is approximately equal to the energy of breaking six intermolecular hydrogen bonds that stabilize the gA channel dimer.

  3. Calculation of energy deposition distributions for simple geometries

    NASA Technical Reports Server (NTRS)

    Watts, J. W., Jr.

    1973-01-01

    When high-energy charged particles pass through a thin detector, the ionization energy loss in that detector is subject to fluctuations or straggling which must be considered in interpreting the data. Under many conditions, which depend upon the charge and energy of the incident particle and the detector geometry, the ionization energy lost by the particle is significantly different from the energy deposited in the detector. This problem divides naturally into a calculation of the energy loss that results in excitation and low-energy secondary electrons which do not travel far from their production points, and a calculation of energy loss that results in high-energy secondary electrons which can escape from the detector. The first calculation is performed using a modification of the Vavilov energy loss distribution. A cutoff energy is introduced above which all electrons are ignored and energy transferred to low energy particles is assumed to be equivalent to the energy deposited by them. For the second calculation, the trajectory of the primary particle is considered as a source of secondary high-energy electrons. The electrons from this source are transported using Monte Carlo techniques and multiple scattering theory, and the energy deposited by them in the detector is calculated. The results of the two calculations are then combined to predict the energy deposition distribution. The results of these calculations are used to predict the charge resolution of parallel-plate pulse ionization chambers that are being designed to measure the charge spectrum of heavy nuclei in the galactic cosmic-ray flux.

  4. Density functional theory for comprehensive orbital energy calculations.

    PubMed

    Nakata, Ayako; Tsuneda, Takao

    2013-08-14

    This study reveals the reason core 1s orbital energies and the highest occupied molecular orbital (HOMO) energies of hydrogen and rare gas atoms are underestimated by long-range corrected (LC) density functional theory (DFT), which quantitatively reproduces the HOMO energies of other systems and the lowest unoccupied molecular orbital (LUMO) energies. Applying the pseudospectral regional (PR) self-interaction correction (SIC) drastically improved the underestimated orbital energies in LC-DFT calculations, while maintaining or improving the accuracies in the calculated valence HOMO and LUMO energies. This indicates that the self-interaction error in exchange functionals causes the underestimations of core 1s orbital energies and the HOMO energies of hydrogen and rare gas atoms in LC-DFT calculations. To clarify the reason for the improvement, the fractional occupation dependences of total electronic energies and orbital energies were examined. The calculated results clearly showed that the LC-PR functional gives almost linear dependences of total electronic energies for a slight decrease in the occupation number of core 1s orbitals, although this linear dependence disappears for significant decrease due to the shrinking of exchange self-interaction regions. It was also clarified that the PRSIC hardly affects the occupation number dependences of the total electronic energies and orbital energies for the fractional occupations of HOMOs and LUMOs. As a result, it was concluded that core orbital energies are obtained accurately by combining LC-DFT with PRSIC.

  5. Energy deposition calculated by PHITS code in Pb spallation target

    NASA Astrophysics Data System (ADS)

    Yu, Quanzhi

    2016-01-01

    Energy deposition in a Pb spallation target irradiated by high energetic protons was calculated by PHITS2.52 code. The validation of the energy deposition and neutron production calculated by PHITS code was performed. Results show good agreements between the simulation results and the experimental data. Detailed comparison shows that for the total energy deposition, PHITS simulation result was about 15% overestimation than that of the experimental data. For the energy deposition along the length of the Pb target, the discrepancy mainly presented at the front part of the Pb target. Calculation indicates that most of the energy deposition comes from the ionizations of the primary protons and the produced secondary particles. With the event generator mode of PHITS, the deposit energy distribution for the particles and the light nulclei is presented for the first time. It indicates that the primary protons with energy more than 100 MeV are the most contributors to the total energy deposition. The energy depositions peaking at 10 MeV and 0.1 MeV, are mainly caused by the electrons, pions, d, t, 3He and also α particles during the cascade process and the evaporation process, respectively. The energy deposition density caused by different proton beam profiles are also calculated and compared. Such calculation and analyses are much helpful for better understanding the physical mechanism of energy deposition in the spallation target, and greatly useful for the thermal hydraulic design of the spallation target.

  6. Heuristic control of kinetic energy in dynamic reaction coordinate calculations.

    PubMed

    Hellweg, Arnim

    2013-08-01

    For the understanding and prediction of chemical reactions, detailed knowledge of the minimum energy path between reactants and transition state is of utmost importance. Stewart et al. (J. Comput. Chem. 1987, 8, 1117) proposed the usage of molecular trajectories calculated from Newton's equations of motion for an efficient reaction path following. Two operational modes are possible thereby: intrinsic (IRC) and dynamic reaction coordinate calculations (DRC). The technical difference between these modes is that in an IRC calculation the kinetic energy of the nuclei is quenched while the total energy is conserved in DRC calculations. In this work, a heuristic control methodology of atomic kinetic energies in DRC calculations using fuzzy logic is proposed. A diversified test set of 10 reactions has been collected to examine the performance of this approach. Fuzzy rule-based models are found to be a convenient way to make the determination of accessible paths of chemical reactions computationally efficient.

  7. Guidelines for the analysis of free energy calculations

    PubMed Central

    Klimovich, Pavel V.; Shirts, Michael R.; Mobley, David L.

    2015-01-01

    Free energy calculations based on molecular dynamics (MD) simulations show considerable promise for applications ranging from drug discovery to prediction of physical properties and structure-function studies. But these calculations are still difficult and tedious to analyze, and best practices for analysis are not well defined or propagated. Essentially, each group analyzing these calculations needs to decide how to conduct the analysis and, usually, develop its own analysis tools. Here, we review and recommend best practices for analysis yielding reliable free energies from molecular simulations. Additionally, we provide a Python tool, alchemical–analysis.py, freely available on GitHub at https://github.com/choderalab/pymbar–examples, that implements the analysis practices reviewed here for several reference simulation packages, which can be adapted to handle data from other packages. Both this review and the tool covers analysis of alchemical calculations generally, including free energy estimates via both thermodynamic integration and free energy perturbation-based estimators. Our Python tool also handles output from multiple types of free energy calculations, including expanded ensemble and Hamiltonian replica exchange, as well as standard fixed ensemble calculations. We also survey a range of statistical and graphical ways of assessing the quality of the data and free energy estimates, and provide prototypes of these in our tool. We hope these tools and discussion will serve as a foundation for more standardization of and agreement on best practices for analysis of free energy calculations. PMID:25808134

  8. Guidelines for the analysis of free energy calculations.

    PubMed

    Klimovich, Pavel V; Shirts, Michael R; Mobley, David L

    2015-05-01

    Free energy calculations based on molecular dynamics simulations show considerable promise for applications ranging from drug discovery to prediction of physical properties and structure-function studies. But these calculations are still difficult and tedious to analyze, and best practices for analysis are not well defined or propagated. Essentially, each group analyzing these calculations needs to decide how to conduct the analysis and, usually, develop its own analysis tools. Here, we review and recommend best practices for analysis yielding reliable free energies from molecular simulations. Additionally, we provide a Python tool, alchemical-analysis.py, freely available on GitHub as part of the pymbar package (located at http://github.com/choderalab/pymbar), that implements the analysis practices reviewed here for several reference simulation packages, which can be adapted to handle data from other packages. Both this review and the tool covers analysis of alchemical calculations generally, including free energy estimates via both thermodynamic integration and free energy perturbation-based estimators. Our Python tool also handles output from multiple types of free energy calculations, including expanded ensemble and Hamiltonian replica exchange, as well as standard fixed ensemble calculations. We also survey a range of statistical and graphical ways of assessing the quality of the data and free energy estimates, and provide prototypes of these in our tool. We hope this tool and discussion will serve as a foundation for more standardization of and agreement on best practices for analysis of free energy calculations.

  9. Spectroscopically Accurate Calculations of the Rovibrational Energies of Diatomic Hydrogen

    NASA Astrophysics Data System (ADS)

    Perry, Jason

    2005-05-01

    The Born-Oppenheimer approximation has been used to calculate the rotational and vibrational states of diatomic hydrogen. Because it is an approximation, our group now wants to use a Born-Oppenheimer potential to calculate the electronic energy that has been corrected to match closely with spectroscopic results. We are using a code that has corrections for adiabatic, relativistic, radiative, and non-adiabatic effects. The rovibrational energies have now been calculated for both bound and quasi-bound states. We also want to compute quadrupole transition probabilities for diatomic hydrogen. These calculations aspire to investigate diatomic hydrogen in astrophysical environments.

  10. 18 CFR 11.13 - Energy gains calculations.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 18 Conservation of Power and Water Resources 1 2011-04-01 2011-04-01 false Energy gains calculations. 11.13 Section 11.13 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY REGULATIONS UNDER THE FEDERAL POWER ACT ANNUAL CHARGES UNDER PART I OF...

  11. 18 CFR 11.13 - Energy gains calculations.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 18 Conservation of Power and Water Resources 1 2013-04-01 2013-04-01 false Energy gains calculations. 11.13 Section 11.13 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY REGULATIONS UNDER THE FEDERAL POWER ACT ANNUAL CHARGES UNDER PART I OF...

  12. 18 CFR 11.13 - Energy gains calculations.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 18 Conservation of Power and Water Resources 1 2014-04-01 2014-04-01 false Energy gains calculations. 11.13 Section 11.13 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY REGULATIONS UNDER THE FEDERAL POWER ACT ANNUAL CHARGES UNDER PART I OF...

  13. 18 CFR 11.13 - Energy gains calculations.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Energy gains calculations. 11.13 Section 11.13 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY REGULATIONS UNDER THE FEDERAL POWER ACT ANNUAL CHARGES UNDER PART I OF...

  14. 18 CFR 11.13 - Energy gains calculations.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 18 Conservation of Power and Water Resources 1 2012-04-01 2012-04-01 false Energy gains calculations. 11.13 Section 11.13 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY REGULATIONS UNDER THE FEDERAL POWER ACT ANNUAL CHARGES UNDER PART I OF...

  15. An introduction to best practices in free energy calculations.

    PubMed

    Shirts, Michael R; Mobley, David L

    2013-01-01

    Free energy calculations are extremely useful for investigating small-molecule biophysical properties such as protein-ligand binding affinities and partition coefficients. However, these calculations are also notoriously difficult to implement correctly. In this chapter, we review standard methods for computing free energy via simulation, discussing current best practices and examining potential pitfalls for computational researchers performing them for the first time. We include a variety of examples and tips for how to set up and conduct these calculations, including applications to relative binding affinities and small-molecule solvation free energies.

  16. New approach to calculating the potential energy of colliding nuclei

    SciTech Connect

    Kurmanov, R. S.; Kosenko, G. I.

    2014-12-15

    The differential method proposed by the present authors earlier for the reduction of volume integrals in calculating the potential energy of a compound nucleus is generalized to the case of two interacting nuclei. The Coulomb interaction energy is obtained for the cases of a sharp and a diffuse boundary of nuclei, while the nuclear interaction energy is found only for nuclei with a sharp boundary, the finiteness of the nuclear-force range being taken into account. The present method of calculations permits reducing the time it takes to compute the potential energy at least by two orders of magnitude.

  17. Calculation of Rydberg energy levels for the francium atom

    NASA Astrophysics Data System (ADS)

    Huang, Shi-Zhong; Chu, Jin-Min

    2010-06-01

    Based on the weakest bound electron potential model theory, the Rydberg energy levels and quantum defects of the np2Po1/2 (n = 7-50) and np2Po3/2 (n = 7-50) spectrum series for the francium atom are calculated. The calculated results are in excellent agreement with the 48 measured levels, and 40 energy levels for highly excited states are predicted.

  18. Protein thermostability calculations using alchemical free energy simulations.

    PubMed

    Seeliger, Daniel; de Groot, Bert L

    2010-05-19

    Thermal stability of proteins is crucial for both biotechnological and therapeutic applications. Rational protein engineering therefore frequently aims at increasing thermal stability by introducing stabilizing mutations. The accurate prediction of the thermodynamic consequences caused by mutations, however, is highly challenging as thermal stability changes are caused by alterations in the free energy of folding. Growing computational power, however, increasingly allows us to use alchemical free energy simulations, such as free energy perturbation or thermodynamic integration, to calculate free energy differences with relatively high accuracy. In this article, we present an automated protocol for setting up alchemical free energy calculations for mutations of naturally occurring amino acids (except for proline) that allows an unprecedented, automated screening of large mutant libraries. To validate the developed protocol, we calculated thermodynamic stability differences for 109 mutations in the microbial Ribonuclease Barnase. The obtained quantitative agreement with experimental data illustrates the potential of the approach in protein engineering and design. PMID:20483340

  19. Ab initio calculations of free energy barriers for chemical reactions in solution: proton transfer in [FHF]-.

    PubMed

    Muller, R P; Warshel, A

    1996-01-01

    This paper describes a hybrid ab initio quantum mechanical/molecular mechanics (QM/MM) method for calculating activation free energies of chemical reactions in solution, using molecular mechanics force fields for the solvent and an ab initio technique that incorporates the potential from the solvent in its Hamiltonian for the solute. The empirical valence bond (EVB) method is used as a reference potential for the ab initio free energy calculation, and drives the reaction along the proper coordinate, thus overcoming problems encountered by direct attempts to use molecular orbital methods in calculations of activation free energies. The utility of our method is illustrated by calculating the activation free energy for proton transfer between fluoride ions in the [FHF]-system, in both polar and nonpolar solution.

  20. Molecular modeling study of chiral drug crystals: lattice energy calculations.

    PubMed

    Li, Z J; Ojala, W H; Grant, D J

    2001-10-01

    The lattice energies of a number of chiral drugs with known crystal structures were calculated using Dreiding II force field. The lattice energies, including van der Waals, Coulombic, and hydrogen-bonding energies, of homochiral and racemic crystals of some ephedrine derivatives and of several other chiral drugs, are compared. The calculated energies are correlated with experimental data to probe the underlying intermolecular forces responsible for the formation of racemic species, racemic conglomerates, or racemic compounds, termed chiral discrimination. Comparison of the calculated energies among ephedrine derivatives reveals that a greater Coulombic energy corresponds to a higher melting temperature, while a greater van der Waals energy corresponds to a larger enthalpy of fusion. For seven pairs of homochiral and racemic compounds, correlation of the differences between the two forms in the calculated energies and experimental enthalpy of fusion suggests that the van der Waals interactions play a key role in the chiral discrimination in the crystalline state. For salts of the chiral drugs, the counter ions diminish chiral discrimination by increasing the Coulombic interactions. This result may explain why salt forms favor the formation of racemic conglomerates, thereby facilitating the resolution of racemates.

  1. WAPA Daily Energy Accounting Activities

    1990-10-01

    ISA (Interchange, Scheduling, & Accounting) is the interchange scheduling system used by the DOE Western Area Power Administration to perform energy accounting functions associated with the daily activities of the Watertown Operations Office (WOO). The system's primary role is to provide accounting functions for scheduled energy which is exchanged with other power companies and power operating organizations. The system has a secondary role of providing a historical record of all scheduled interchange transactions. The followingmore » major functions are performed by ISA: scheduled energy accounting for received and delivered energy; generation scheduling accounting for both fossil and hydro-electric power plants; metered energy accounting for received and delivered totals; energy accounting for Direct Current (D.C.) Ties; regulation accounting; automatic generation control set calculations; accounting summaries for Basin, Heartland Consumers Power District, and the Missouri Basin Municipal Power Agency; calculation of estimated generation for the Laramie River Station plant; daily and monthly reports; and dual control areas.« less

  2. The effect of calculated explosive energy output on blast design

    SciTech Connect

    Katsabanis, P.D.; Workman, L.

    1996-12-31

    The energy output of an explosive is typically calculated using an equation of state and computer applications. Results are reported as weight and bulk strength, either in absolute terms or relative to ANFO. The effect of the equation of state selected and the assumptions regarding the energy calculation are considered and interpreted for the purpose of blast design. It appears that variations in the heat of detonation which result from the selection of the equation of state and parameters associated with it are not sufficient to significantly affect blast patterns, explosive consumption and costs. However variations stemming from the use of available energy associated with a cut-off pressure are significant, suggesting in many cases large pattern expansions. The validity of the various approaches is discussed and blast design results based on the energy calculated by the different approaches are presented and evaluated.

  3. Neutron absorbed dose determination by calculations of recoil energy.

    PubMed

    Wrobel, F; Benabdesselam, M; Iacconi, P; Lapraz, D

    2004-01-01

    The aim of this work is to calculate the absorbed dose to matter due to neutrons in the 5-150 MeV energy range. Materials involved in the calculations are Al2O3, CaSO4 and CaS, which may be used as dosemeters and have already been studied for their luminescent properties. The absorbed dose is assumed to be mainly due to the energy deposited by the recoils. Elastic reactions are treated with the ECIS code while for the non-elastic ones, a Monte Carlo code has been developed and allowed to follow the nucleus decay and to determine its characteristics (nature and energy). Finally, the calculations show that the absorbed dose is mainly due to non-elastic process and that above 20 MeV this dose decreases slightly with the neutron energy. PMID:15353750

  4. Calculation method for active silencers with a variable section

    NASA Technical Reports Server (NTRS)

    Marinescu, V.

    1974-01-01

    By introducing variable section silencers in divergent and convergent sections or elbows of ventilation plants, the length of classical silencers can be reduced. Presented is an original calculation method for active noise silencers with a continuously variable section, as well as calculation relations worked out by this method for eight common practical cases.

  5. Science Activities in Energy: Electrical Energy.

    ERIC Educational Resources Information Center

    Oak Ridge Associated Universities, TN.

    Presented is a science activities in energy package which includes 16 activities relating to electrical energy. Activities are simple, concrete experiments for fourth, fifth and sixth grades which illustrate principles and problems relating to energy. Each activity is outlined in a single card which is introduced by a question. A teacher's…

  6. Science Activities in Energy: Solar Energy.

    ERIC Educational Resources Information Center

    Oak Ridge Associated Universities, TN.

    Presented is a science activities in energy package which includes 12 activities relating to solar energy. Activities are simple, concrete experiments for fourth, fifth, and sixth grades, which illustrate principles and problems relating to energy. Each activity is outlined on a single card which is introduced by a question. A teacher's supplement…

  7. Science Activities in Energy: Chemical Energy.

    ERIC Educational Resources Information Center

    Oak Ridge Associated Universities, TN.

    Presented is a science activities in energy package which includes 15 activities relating to chemical energy. Activities are simple, concrete experiments for fourth, fifth and sixth grades which illustrate principles and problems relating to energy. Each activity is outlined on a single card which is introduced by a question. A teacher's…

  8. Performance calculation and simulation system of high energy laser weapon

    NASA Astrophysics Data System (ADS)

    Wang, Pei; Liu, Min; Su, Yu; Zhang, Ke

    2014-12-01

    High energy laser weapons are ready for some of today's most challenging military applications. Based on the analysis of the main tactical/technical index and combating process of high energy laser weapon, a performance calculation and simulation system of high energy laser weapon was established. Firstly, the index decomposition and workflow of high energy laser weapon was proposed. The entire system was composed of six parts, including classical target, platform of laser weapon, detect sensor, tracking and pointing control, laser atmosphere propagation and damage assessment module. Then, the index calculation modules were designed. Finally, anti-missile interception simulation was performed. The system can provide reference and basis for the analysis and evaluation of high energy laser weapon efficiency.

  9. Calculating fusion neutron energy spectra from arbitrary reactant distributions

    NASA Astrophysics Data System (ADS)

    Eriksson, J.; Conroy, S.; Andersson Sundén, E.; Hellesen, C.

    2016-02-01

    The Directional Relativistic Spectrum Simulator (DRESS) code can perform Monte-Carlo calculations of reaction product spectra from arbitrary reactant distributions, using fully relativistic kinematics. The code is set up to calculate energy spectra from neutrons and alpha particles produced in the D(d, n)3He and T(d, n)4He fusion reactions, but any two-body reaction can be simulated by including the corresponding cross section. The code has been thoroughly tested. The kinematics calculations have been benchmarked against the kinematics module of the ROOT Data Analysis Framework. Calculated neutron energy spectra have been validated against tabulated fusion reactivities and against an exact analytical expression for the thermonuclear fusion neutron spectrum, with good agreement. The DRESS code will be used as the core of a detailed synthetic diagnostic framework for neutron measurements at the JET and MAST tokamaks.

  10. Heavy-ion fission probability calculations at high excitation energy

    SciTech Connect

    D'Arrigo, A.; Giardina, G.; Taccone, A. Istituto Nazionale di Fisica Nucleare, Gruppo Collegato di Messina, Messina Istituto di Tecniche Spettroscopiche del Consiglio Nazionale delle Ricerche, Messina )

    1991-12-01

    In the framework of the statistical theory of nuclear reactions we calculated the fission probability {ital P}{sub {ital f}} of the {sup 153}Tb, {sup 158}Er, {sup 159}Dy, {sup 175}Hf, {sup 179}Ta, {sup 186}Os, and {sup 188}Os nuclei with a mass number {ital A}=150--200 produced by heavy-ion reactions. Starting from the spectra of the single-particle levels as determined by Nix and Moeller, and utilizing a formalism we developed, we determined the excitation energy dependence of the effective level density parameters for the fission and the neutron emission channels. The agreement between the fission probability calculations and the experimental data was reached when a nonadiabatic estimate of the collective effects was used to calculate the nuclear level density. In the fission process at high excitation energies induced by ions heavier than the {alpha} particle, an energy dependence of the effective fission barrier has to be used.

  11. Lead Optimization Mapper: Automating free energy calculations for lead optimization

    PubMed Central

    Liu, Shuai; Wu, Yujie; Lin, Teng; Abel, Robert; Redmann, Jonathan P.; Summa, Christopher M.; Jaber, Vivian R.; Lim, Nathan M.; Mobley, David L.

    2013-01-01

    Alchemical free energy calculations hold increasing promise as an aid to drug discovery efforts. However, applications of these techniques in discovery projects have been relatively few, partly because of the difficulty of planning and setting up calculations. Here, we introduce Lead Optimization Mapper, LOMAP, an automated algorithm to plan efficient relative free energy calculations between potential ligands within a substantial library of perhaps hundreds of compounds. In this approach, ligands are first grouped by structural similarity primarily based on the size of a (loosely defined) maximal common substructure, and then calculations are planned within and between sets of structurally related compounds. An emphasis is placed on ensuring that relative free energies can be obtained between any pair of compounds without combining the results of too many different relative free energy calculations (to avoid accumulation of error) and by providing some redundancy to allow for the possibility of error and consistency checking and provide some insight into when results can be expected to be unreliable. The algorithm is discussed in detail and a Python implementation, based on both Schrödinger's and OpenEye's APIs, has been made available freely under the BSD license. PMID:24072356

  12. Calculation of exchange energies using algebraic perturbation theory

    SciTech Connect

    Burrows, B. L.; Dalgarno, A.; Cohen, M.

    2010-04-15

    An algebraic perturbation theory is presented for efficient calculations of localized states and hence of exchange energies, which are the differences between low-lying states of the valence electron of a molecule, formed by the collision of an ion Y{sup +} with an atom X. For the case of a homonuclear molecule these are the gerade and ungerade states and the exchange energy is an exponentially decreasing function of the internuclear distance. For such homonuclear systems the theory is used in conjunction with the Herring-Holstein technique to give accurate exchange energies for a range of intermolecular separations R. Since the perturbation parameter is essentially 1/R, this method is suitable for large R. In particular, exchange energies are calculated for X{sub 2}{sup +} systems, where X is H, Li, Na, K, Rb, or Cs.

  13. Changing Conceptions of Activation Energy.

    ERIC Educational Resources Information Center

    Pacey, Philip D.

    1981-01-01

    Provides background material which relates to the concept of activation energy, fundamental in the study of chemical kinetics. Compares the related concepts of the Arrhenius activation energy, the activation energy at absolute zero, the enthalpy of activation, and the threshold energy. (CS)

  14. Calculating Ring Pucker Free Energy Surfaces From Reaction Coordinate Forces

    SciTech Connect

    Barnett, Christopher B.; Naidoo, Kevin J.

    2009-03-09

    We implemented the free energy from adaptive reaction coordinate forces (FEARCF) method and applied it to the conformational investigation of carbohydrate ring puckering. The method allows for significantly enhanced sampling of reaction coordinate space. The free energies associated with the ring pucker motion of {beta}-D-ribose (a furanose) and {beta}-D-glucose (a pyranose) were calculated. These can be used to interpret catalytic mechanisms of glycosylases.

  15. General method for calculating derivatives of the lattice electrostatic energy.

    NASA Technical Reports Server (NTRS)

    Macdonald, D. E.; Eftis, J.; Arkilic, G. M.

    1972-01-01

    A method for calculating the derivatives of lattice electrostatic strain energy is proposed. It offers a computation procedure that is more general, concise, and systematic than any of the procedures previously used by Fuchs (1936), Cousins (1967), and Suzuki et al. (1968). The method can also easily be extended to fourth- and higher-order derivatives without undue difficulty.

  16. On the calculation of classical vibrational energy exchange

    NASA Astrophysics Data System (ADS)

    Gibbons, John P.; Stettler, John D.

    1982-07-01

    A three-dimensional, Monte Carlo classical model for the calculation of vibrational energy relaxation and transfer rates for both diatomic—monatomic and diatomic—diatomic systems was developed, analyzed and implemented. Mediation by internal angular momentum changes was demonstrated to be important in these energy transfer processes. This mechanism was incorporated into the model in order to achieve statistically significant results within reasonable computer running times. This made possible the extension of the model calculations to much lower temperatures than had been previously investigated. This calculational procedure was applied to Ar—O 2, to He—O 2 and to the near resonant CO—N 2 process at several temperatures between room temperature and 4000 K with the use of exponential repulsive intermolecular potential. Three different sets of potential parameters obtained from three independent sources were used. The results were compared to experiment.

  17. Accurate calculation of diffraction-limited encircled and ensquared energy.

    PubMed

    Andersen, Torben B

    2015-09-01

    Mathematical properties of the encircled and ensquared energy functions for the diffraction-limited point-spread function (PSF) are presented. These include power series and a set of linear differential equations that facilitate the accurate calculation of these functions. Asymptotic expressions are derived that provide very accurate estimates for the relative amount of energy in the diffraction PSF that fall outside a square or rectangular large detector. Tables with accurate values of the encircled and ensquared energy functions are also presented. PMID:26368873

  18. Calculation of Mg(+)-ligand relative binding energies

    NASA Technical Reports Server (NTRS)

    Partridge, Harry; Bauschlicher, Charles W., Jr.

    1992-01-01

    The calculated relative binding energies of 16 organic molecules to Mg(+) are compared with experimental results where available. The geometries of the ligands and the Mg(+)-ligand complexes arc optimized at the self-consistent field level using a 6-31G* basis set. The Mg(+) binding energies are evaluated using second-order perturbation theory and basis sets of triple-sigma quality augmented with two sets of polarization functions. This level of theory is calibrated against higher levels of theory for selected systems. The computed binding energies are accurate to about 2 kcal/mol.

  19. The Calculation of Accurate Metal-Ligand Bond Energies

    NASA Technical Reports Server (NTRS)

    Bauschlicher, Charles W.; Partridge, Harry, III; Ricca, Alessandra; Arnold, James O. (Technical Monitor)

    1997-01-01

    The optimization of the geometry and calculation of zero-point energies are carried out at the B3LYP level of theory. The bond energies are determined at this level, as well as at the CCSD(T) level using very large basis sets. The successive OH bond energies to the first row transition metal cations are reported. For most systems there has been an experimental determination of the first OH. In general, the CCSD(T) values are in good agreement with experiment. The bonding changes from mostly covalent for the early metals to mostly electrostatic for the late transition metal systems.

  20. The theoretical shape of sucrose crystals from energy calculations

    NASA Astrophysics Data System (ADS)

    Saska, Michael; Myerson, Allan S.

    1983-05-01

    The surface energies of individual crystallographic faces of crystalline sucrose were calculated using two forms of the 6-exp (Buckingham) potential. Hydrogen bond energies were calculated as a sum of O-H, O…H and O…O interactions where the Lippincott-Schroeder short-range potential was used for O-H and O…H pairs and the 6-exp potential for the non-bonded O…O interactions. Assuming that the surface energy equals half of the cohesive energy of the crystal, the attachment and surface energies of most of the faces found on as sucrose crystal were calculated. A computer program was written to draw the theoretical shape of crystals given the positions (central distances) of its faces. The resulting sucrose shapes are elongated along the c-axis. It is argued that the c-axis elongated habit is an intrinsic shape for vapor grown sucrose crystals (if realizable) and it is suggested that the usual shapes of solution grown sucrose crystals can be explained in terms of solvent (water) adsorption.

  1. Three dimensional calculation of flux of low energy atmospheric neutrinos

    NASA Technical Reports Server (NTRS)

    Lee, H.; Bludman, S. A.

    1985-01-01

    Results of three-dimensional Monte Carlo calculation of low energy flux of atmospheric neutrinos are presented and compared with earlier one-dimensional calculations 1,2 valid at higher neutrino energies. These low energy neutrinos are the atmospheric background in searching for neutrinos from astrophysical sources. Primary cosmic rays produce the neutrino flux peaking at near E sub=40 MeV and neutrino intensity peaking near E sub v=100 MeV. Because such neutrinos typically deviate by 20 approximately 30 from the primary cosmic ray direction, three-dimensional effects are important for the search of atmospheric neutrinos. Nevertheless, the background of these atmospheric neutrinos is negligible for the detection of solar and supernova neutrinos.

  2. Calculation of energy for lighting using EN 15193

    NASA Astrophysics Data System (ADS)

    Mitsopoulou, Mairi

    The aim of this report is to investigate the impact of the application of the new European directive prEN 15193, concerning the Energy performance of buildings - Energy requirements for lighting on the design of artificial lighting in open plan office buildings. A study of the energy consequences of three different types of building and different types of lighting systems within the buildings was carried out. The result of the study helped understand how each type of building performs in terms of the amount of energy that is used in the lighting the study also helped to verify the calculation procedure LENI used in EN 15193 Energy Performance of Buildings - Energy Requirements for Lighting. The efficient use of energy for lighting can reduce operating costs by reducing the energy consumption for lighting. Besides direct savings, indirect energy savings can be found in buildings, with high cooling loads because of the reduced heat production and thus, the reduced energy consumption for air conditioning, a fact that in a worldwide scale will have important environmental benefits.

  3. Composite electron propagator methods for calculating ionization energies

    NASA Astrophysics Data System (ADS)

    Díaz-Tinoco, Manuel; Dolgounitcheva, O.; Zakrzewski, V. G.; Ortiz, J. V.

    2016-06-01

    Accurate ionization energies of molecules may be determined efficiently with composite electron-propagator (CEP) techniques. These methods estimate the results of a calculation with an advanced correlation method and a large basis set by performing a series of more tractable calculations in which large basis sets are used with simpler approximations and small basis sets are paired with more demanding correlation techniques. The performance of several CEP methods, in which diagonal, second-order electron propagator results with large basis sets are combined with higher-order results obtained with smaller basis sets, has been tested for the ionization energies of closed-shell molecules from the G2 set. Useful compromises of accuracy and computational efficiency employ complete-basis-set extrapolation for second-order results and small basis sets in third-order, partial third-order, renormalized partial-third order, or outer valence Green's function calculations. Analysis of results for vertical as well as adiabatic ionization energies leads to specific recommendations on the best use of regular and composite methods. Results for 22 organic molecules of interest in the design of photovoltaic devices, benzo[a]pyrene, Mg-octaethylporphyrin, and C60 illustrate the capabilities of CEP methods for calculations on large molecules.

  4. Composite electron propagator methods for calculating ionization energies.

    PubMed

    Díaz-Tinoco, Manuel; Dolgounitcheva, O; Zakrzewski, V G; Ortiz, J V

    2016-06-14

    Accurate ionization energies of molecules may be determined efficiently with composite electron-propagator (CEP) techniques. These methods estimate the results of a calculation with an advanced correlation method and a large basis set by performing a series of more tractable calculations in which large basis sets are used with simpler approximations and small basis sets are paired with more demanding correlation techniques. The performance of several CEP methods, in which diagonal, second-order electron propagator results with large basis sets are combined with higher-order results obtained with smaller basis sets, has been tested for the ionization energies of closed-shell molecules from the G2 set. Useful compromises of accuracy and computational efficiency employ complete-basis-set extrapolation for second-order results and small basis sets in third-order, partial third-order, renormalized partial-third order, or outer valence Green's function calculations. Analysis of results for vertical as well as adiabatic ionization energies leads to specific recommendations on the best use of regular and composite methods. Results for 22 organic molecules of interest in the design of photovoltaic devices, benzo[a]pyrene, Mg-octaethylporphyrin, and C60 illustrate the capabilities of CEP methods for calculations on large molecules. PMID:27305999

  5. Activities Handbook for Energy Education.

    ERIC Educational Resources Information Center

    DeVito, Alfred; Krockover, Gerald H.

    The purpose of this handbook is to present information about energy and to translate this information into learning activities for children. Chapter 1, "Energy: A Delicate Dilemma," presents activities intended to provide an introduction to energy and energy usage. Chapter 2, "What are the Sources of Energy?" provides background information and…

  6. Energy Adventure Center. Activity Book.

    ERIC Educational Resources Information Center

    Carlton, Linda L.

    Energy activities are provided in this student activity book. They include: (1) an energy walk; (2) forms of energy in the home; (3) energy conversion; (4) constructing a solar hot dog cooker (with instructions for drawing a parabola); (5) interviewing senior citizens to learn about energy use in the past; (6) packaging materials; (7) insulation;…

  7. Binding Energy Calculations for Novel Ternary Ionic Lattices

    NASA Astrophysics Data System (ADS)

    Rodríguez-Mijangos, Ricardo; Vazquez-Polo, Gustavo

    2002-03-01

    Theoretical calculations for the binding energy between metalic ions and negative ions on a novel ternary ionic lattice is carried out for several solid solutions prepared with different concentrations and characterized recently (1). The ternary lattices that reach a good miscibility are: KCl(x)KBr(y)RbCl(z) in three different concentrations: (x=y=z=0.33), (x=0.5, y=0.25, z=0.25) and (x=0.33, y=0.07, z=0.60). The binding energy for these novel structures is calculated from the lattice constants obtained by X ray diffractometry analysis performed on the samples and the Vegard law (2). For the repulsive force exponent m, an average of the m values was considered. The energy values obtained by the Born´expression are compared with corresponding energy values from the lattice with more complex expressions, such as the Born Mayer, Born-Van der Walls. There is a good aggreement between all these calculations. (1)R. R. Mijangos, A. Cordero-Borboa, E. Alvarez, M. Cervantes, Physics Letters A 282 (2001) 195-200. (2) G. Vazquez-Polo, R. R. Mijangos et al. Revista Mexicana de Fisica, 47, Diciembre 2001. In Press.

  8. TOSPAC calculations in support of the COVE 2A benchmarking activity; Yucca Mountain Site Characterization Project

    SciTech Connect

    Gauthier, J.H.; Zieman, N.B.; Miller, W.B.

    1991-10-01

    The purpose of the the Code Verification (COVE) 2A benchmarking activity is to assess the numerical accuracy of several computer programs for the Yucca Mountain Site Characterization Project of the Department of Energy. This paper presents a brief description of the computer program TOSPAC and a discussion of the calculational effort and results generated by TOSPAC for the COVE 2A problem set. The calculations were performed twice. The initial calculations provided preliminary results for comparison with the results from other COVE 2A participants. TOSPAC was modified in response to the comparison and the final calculations included a correction and several enhancements to improve efficiency. 8 refs.

  9. Science Activities in Energy: Conservation.

    ERIC Educational Resources Information Center

    Oak Ridge Associated Universities, TN.

    Presented is a science activities in energy package which includes 14 activities relating to energy conservation. Activities are simple, concrete experiments for fourth, fifth and sixth grades, which illustrate principles and problems relating to energy. Each activity is outlined on a simple card which is introduced by a question. A teacher's…

  10. PDB ligand conformational energies calculated quantum-mechanically.

    PubMed

    Sitzmann, Markus; Weidlich, Iwona E; Filippov, Igor V; Liao, Chenzhong; Peach, Megan L; Ihlenfeldt, Wolf-Dietrich; Karki, Rajeshri G; Borodina, Yulia V; Cachau, Raul E; Nicklaus, Marc C

    2012-03-26

    We present here a greatly updated version of an earlier study on the conformational energies of protein-ligand complexes in the Protein Data Bank (PDB) [Nicklaus et al. Bioorg. Med. Chem. 1995, 3, 411-428], with the goal of improving on all possible aspects such as number and selection of ligand instances, energy calculations performed, and additional analyses conducted. Starting from about 357,000 ligand instances deposited in the 2008 version of the Ligand Expo database of the experimental 3D coordinates of all small-molecule instances in the PDB, we created a "high-quality" subset of ligand instances by various filtering steps including application of crystallographic quality criteria and structural unambiguousness. Submission of 640 Gaussian 03 jobs yielded a set of about 415 successfully concluded runs. We used a stepwise optimization of internal degrees of freedom at the DFT level of theory with the B3LYP/6-31G(d) basis set and a single-point energy calculation at B3LYP/6-311++G(3df,2p) after each round of (partial) optimization to separate energy changes due to bond length stretches vs bond angle changes vs torsion changes. Even for the most "conservative" choice of all the possible conformational energies-the energy difference between the conformation in which all internal degrees of freedom except torsions have been optimized and the fully optimized conformer-significant energy values were found. The range of 0 to ~25 kcal/mol was populated quite evenly and independently of the crystallographic resolution. A smaller number of "outliers" of yet higher energies were seen only at resolutions above 1.3 Å. The energies showed some correlation with molecular size and flexibility but not with crystallographic quality metrics such as the Cruickshank diffraction-component precision index (DPI) and R(free)-R, or with the ligand instance-specific metrics such as occupancy-weighted B-factor (OWAB), real-space R factor (RSR), and real-space correlation coefficient

  11. SNS Sample Activation Calculator Flux Recommendations and Validation

    SciTech Connect

    McClanahan, Tucker C.; Gallmeier, Franz X.; Iverson, Erik B.; Lu, Wei

    2015-02-01

    The Spallation Neutron Source (SNS) at Oak Ridge National Laboratory (ORNL) uses the Sample Activation Calculator (SAC) to calculate the activation of a sample after the sample has been exposed to the neutron beam in one of the SNS beamlines. The SAC webpage takes user inputs (choice of beamline, the mass, composition and area of the sample, irradiation time, decay time, etc.) and calculates the activation for the sample. In recent years, the SAC has been incorporated into the user proposal and sample handling process, and instrument teams and users have noticed discrepancies in the predicted activation of their samples. The Neutronics Analysis Team validated SAC by performing measurements on select beamlines and confirmed the discrepancies seen by the instrument teams and users. The conclusions were that the discrepancies were a result of a combination of faulty neutron flux spectra for the instruments, improper inputs supplied by SAC (1.12), and a mishandling of cross section data in the Sample Activation Program for Easy Use (SAPEU) (1.1.2). This report focuses on the conclusion that the SAPEU (1.1.2) beamline neutron flux spectra have errors and are a significant contributor to the activation discrepancies. The results of the analysis of the SAPEU (1.1.2) flux spectra for all beamlines will be discussed in detail. The recommendations for the implementation of improved neutron flux spectra in SAPEU (1.1.3) are also discussed.

  12. Science Activities in Energy: Wind Energy.

    ERIC Educational Resources Information Center

    Oak Ridge Associated Universities, TN.

    Included in this science activities energy package are 12 activities related to wind energy for elementary students. Each activity is outlined on a single card and is introduced by a question. Topics include: (1) At what time of day is there enough wind to make electricity where you live?; (2) Where is the windiest spot on your schoolground?; and…

  13. Perspective on Free-Energy Perturbation Calculations for Chemical Equilibria

    PubMed Central

    Jorgensen, William L.; Thomas, Laura L.

    2009-01-01

    An overview is provided on the computation of free energy changes in solution using perturbation theory, overlap sampling, and related approximate methods. As a specific application, extensive results are provided for free energies of hydration of substituted benzenes using the OPLS-AA force field in explicit TIP4P water. For a similar amount of computer time, the double-wide sampling and overlap sampling methods yield very similar results in the free-energy perturbation calculations. With standard protocols, the average statistical uncertainty in computed differences in free energies of hydration is 0.1 – 0.2 kcal/mol. Application of the power-series expansion in the Peierls equation was also tested. Use of the first-order term is generally reliable, while inclusion of the slowly-convergent, second-order fluctuation term causes deterioration in the results for strongly hydrogen-bonded solutes. PMID:19936324

  14. Self-consistent calculations of alpha-decay energies

    SciTech Connect

    Tolokonnikov, S. V.; Lutostansky, Yu. S.; Saperstein, E. E.

    2013-06-15

    On the basis of the self-consistent theory of finite Fermi systems, the energies of alphadecay chains were calculated for several new superheavy nuclei discovered recently in experiments of the Dubna-Livermore Collaboration headed by Yu.Ts. Oganessian. The approach in question is implemented on the basis of the generalized method of the density functional proposed by Fayans and his coauthors. The version used here relies on the functional DF3-a proposed recently for describing a wide array of nuclear data, including data on superheavy nuclei. A detailed comparison of the results obtained on this basis with the predictions of different approaches, including the self-consistent Skyrme-Hartree-Fock method, the micro-macro method in the version developed by Sobiczewski and his coauthors, and the phenomenological method of Liran and his coauthors, is performed. The resulting alpha-decay energies are used to calculate respective lifetimes with the aid of the phenomenological Parkhomenko-Sobiczewski formula.

  15. Nitroborazines as potential high energy materials: density functional theoretical calculations.

    PubMed

    Janning, Jay D; Ball, David W

    2010-05-01

    As part of a search for new high energy density materials, we used density functional theoretical calculations to determine the thermochemical properties of various nitro-substituted borazine molecules. Optimized geometries, vibrational frequencies and spectra, and enthalpies of formation and combustion were determined for nitroborazine, dinitroborazine, trinitroborazine, and methyltrinitroborazine with substituents on either the boron atoms or the nitrogen atoms of the parent borazine ring. Our results indicate that the specific enthalpy of combustion ranged from 4 to 11 kJ g(-1), with increasing substitution of nitro groups lowering the energy of combustion per unit mass.

  16. Improved initial guess for minimum energy path calculations.

    PubMed

    Smidstrup, Søren; Pedersen, Andreas; Stokbro, Kurt; Jónsson, Hannes

    2014-06-01

    A method is presented for generating a good initial guess of a transition path between given initial and final states of a system without evaluation of the energy. An objective function surface is constructed using an interpolation of pairwise distances at each discretization point along the path and the nudged elastic band method then used to find an optimal path on this image dependent pair potential (IDPP) surface. This provides an initial path for the more computationally intensive calculations of a minimum energy path on an energy surface obtained, for example, by ab initio or density functional theory. The optimal path on the IDPP surface is significantly closer to a minimum energy path than a linear interpolation of the Cartesian coordinates and, therefore, reduces the number of iterations needed to reach convergence and averts divergence in the electronic structure calculations when atoms are brought too close to each other in the initial path. The method is illustrated with three examples: (1) rotation of a methyl group in an ethane molecule, (2) an exchange of atoms in an island on a crystal surface, and (3) an exchange of two Si-atoms in amorphous silicon. In all three cases, the computational effort in finding the minimum energy path with DFT was reduced by a factor ranging from 50% to an order of magnitude by using an IDPP path as the initial path. The time required for parallel computations was reduced even more because of load imbalance when linear interpolation of Cartesian coordinates was used.

  17. Improved initial guess for minimum energy path calculations

    SciTech Connect

    Smidstrup, Søren; Pedersen, Andreas; Stokbro, Kurt

    2014-06-07

    A method is presented for generating a good initial guess of a transition path between given initial and final states of a system without evaluation of the energy. An objective function surface is constructed using an interpolation of pairwise distances at each discretization point along the path and the nudged elastic band method then used to find an optimal path on this image dependent pair potential (IDPP) surface. This provides an initial path for the more computationally intensive calculations of a minimum energy path on an energy surface obtained, for example, by ab initio or density functional theory. The optimal path on the IDPP surface is significantly closer to a minimum energy path than a linear interpolation of the Cartesian coordinates and, therefore, reduces the number of iterations needed to reach convergence and averts divergence in the electronic structure calculations when atoms are brought too close to each other in the initial path. The method is illustrated with three examples: (1) rotation of a methyl group in an ethane molecule, (2) an exchange of atoms in an island on a crystal surface, and (3) an exchange of two Si-atoms in amorphous silicon. In all three cases, the computational effort in finding the minimum energy path with DFT was reduced by a factor ranging from 50% to an order of magnitude by using an IDPP path as the initial path. The time required for parallel computations was reduced even more because of load imbalance when linear interpolation of Cartesian coordinates was used.

  18. Ab Initio Calculations for the Surface Energy of Silver Nanoclusters

    NASA Astrophysics Data System (ADS)

    Medasani, Bharat; Vasiliev, Igor; Park, Young Ho

    2007-03-01

    We apply first principles computational methods to study the surface energy and the surface stress of silver nanoparticles. The structures, energies and lattice contractions of spherical Ag nanoclusters are calculated in the framework of density functional theory combined with the generalized gradient approximation. Our calculations predict the surface energies of Ag nanoclusters to be in the range of 1-2 J/m^2. These values are close to the bulk surface energy of silver, but are significantly lower than the recently reported value of 7.2 J/m^2 derived from the Kelvin equation for free Ag nanoparticles. From the lattice contraction and the nearest neighbor interatomic distance, we estimate the surface stress of the silver nanoclusters to be in the the range of 1-1.45 N/m. This result suggests that a liquid droplet model can be employed to evaluate the surface energy and the surface stress of Ag nanoparticles. K. K. Nanda et al., Phys. Rev. Lett. 91, 106102 (2003).

  19. Calculating Free Energies Using Scaled-Force Molecular Dynamics Algorithm

    NASA Technical Reports Server (NTRS)

    Darve, Eric; Wilson, Micahel A.; Pohorille, Andrew

    2000-01-01

    One common objective of molecular simulations in chemistry and biology is to calculate the free energy difference between different states of the system of interest. Examples of problems that have such an objective are calculations of receptor-ligand or protein-drug interactions, associations of molecules in response to hydrophobic, and electrostatic interactions or partition of molecules between immiscible liquids. Another common objective is to describe evolution of the system towards a low energy (possibly the global minimum energy), 'native' state. Perhaps the best example of such a problem is folding of proteins or short RNA molecules. Both types of problems share the same difficulty. Often, different states of the system are separated by high energy barriers, which implies that transitions between these states are rare events. This, in turn, can greatly impede exploration of phase space. In some instances this can lead to 'quasi non-ergodicity', whereby a part of phase space is inaccessible on timescales of the simulation. A host of strategies has been developed to improve efficiency of sampling the phase space. For example, some Monte Carlo techniques involve large steps which move the system between low-energy regions in phase space without the need for sampling the configurations corresponding to energy barriers (J-walking). Most strategies, however, rely on modifying probabilities of sampling low and high-energy regions in phase space such that transitions between states of interest are encouraged. Perhaps the simplest implementation of this strategy is to increase the temperature of the system. This approach was successfully used to identify denaturation pathways in several proteins, but it is clearly not applicable to protein folding. It is also not a successful method for determining free energy differences. Finally, the approach is likely to fail for systems with co-existing phases, such as water-membrane systems, because it may lead to spontaneous

  20. Non-Equilibrium Properties from Equilibrium Free Energy Calculations

    NASA Technical Reports Server (NTRS)

    Pohorille, Andrew; Wilson, Michael A.

    2012-01-01

    Calculating free energy in computer simulations is of central importance in statistical mechanics of condensed media and its applications to chemistry and biology not only because it is the most comprehensive and informative quantity that characterizes the eqUilibrium state, but also because it often provides an efficient route to access dynamic and kinetic properties of a system. Most of applications of equilibrium free energy calculations to non-equilibrium processes rely on a description in which a molecule or an ion diffuses in the potential of mean force. In general case this description is a simplification, but it might be satisfactorily accurate in many instances of practical interest. This hypothesis has been tested in the example of the electrodiffusion equation . Conductance of model ion channels has been calculated directly through counting the number of ion crossing events observed during long molecular dynamics simulations and has been compared with the conductance obtained from solving the generalized Nernst-Plank equation. It has been shown that under relatively modest conditions the agreement between these two approaches is excellent, thus demonstrating the assumptions underlying the diffusion equation are fulfilled. Under these conditions the electrodiffusion equation provides an efficient approach to calculating the full voltage-current dependence routinely measured in electrophysiological experiments.

  1. Quantum Monte Carlo calculation of the binding energy of the beryllium dimer

    SciTech Connect

    Deible, Michael J.; Kessler, Melody; Gasperich, Kevin E.; Jordan, Kenneth D.

    2015-08-28

    The accurate calculation of the binding energy of the beryllium dimer is a challenging theoretical problem. In this study, the binding energy of Be{sub 2} is calculated using the diffusion Monte Carlo (DMC) method, using single Slater determinant and multiconfigurational trial functions. DMC calculations using single-determinant trial wave functions of orbitals obtained from density functional theory calculations overestimate the binding energy, while DMC calculations using Hartree-Fock or CAS(4,8), complete active space trial functions significantly underestimate the binding energy. In order to obtain an accurate value of the binding energy of Be{sub 2} from DMC calculations, it is necessary to employ trial functions that include excitations outside the valence space. Our best estimate DMC result for the binding energy of Be{sub 2}, obtained by using configuration interaction trial functions and extrapolating in the threshold for the configurations retained in the trial function, is 908 cm{sup −1}, only slightly below the 935 cm{sup −1} value derived from experiment.

  2. Free energy calculations for a flexible water model.

    PubMed

    Habershon, Scott; Manolopoulos, David E

    2011-11-28

    In this work, we consider the problem of calculating the classical free energies of liquids and solids for molecular models with intramolecular flexibility. We show that thermodynamic integration from the fully-interacting solid of interest to a Debye crystal reference state, with anisotropic harmonic interactions derived from the Hessian of the original crystal, provides a straightforward route to calculating the Gibbs free energy of the solid. To calculate the molecular liquid free energy, it is essential to correctly account for contributions from both intermolecular and intramolecular motion; we employ thermodynamic integration to a Lennard-Jones reference fluid, coupled with direct evaluation of the molecular ro-vibrational partition function. These approaches are used to study the low-pressure classical phase diagram of the flexible q-TIP4P/F water model. We find that, while the experimental ice-I/liquid and ice-III/liquid coexistence lines are described reasonably well by this model, the ice-II phase is predicted to be metastable. In light of this finding, we go on to examine how the coupling between intramolecular flexibility and intermolecular interactions influences the computed phase diagram by comparing our results with those of the underlying rigid-body water model. PMID:21887423

  3. Free energy calculations for a flexible water model.

    PubMed

    Habershon, Scott; Manolopoulos, David E

    2011-11-28

    In this work, we consider the problem of calculating the classical free energies of liquids and solids for molecular models with intramolecular flexibility. We show that thermodynamic integration from the fully-interacting solid of interest to a Debye crystal reference state, with anisotropic harmonic interactions derived from the Hessian of the original crystal, provides a straightforward route to calculating the Gibbs free energy of the solid. To calculate the molecular liquid free energy, it is essential to correctly account for contributions from both intermolecular and intramolecular motion; we employ thermodynamic integration to a Lennard-Jones reference fluid, coupled with direct evaluation of the molecular ro-vibrational partition function. These approaches are used to study the low-pressure classical phase diagram of the flexible q-TIP4P/F water model. We find that, while the experimental ice-I/liquid and ice-III/liquid coexistence lines are described reasonably well by this model, the ice-II phase is predicted to be metastable. In light of this finding, we go on to examine how the coupling between intramolecular flexibility and intermolecular interactions influences the computed phase diagram by comparing our results with those of the underlying rigid-body water model.

  4. Free energy perturbation calculations on glucosidase-inhibitor complexes.

    PubMed

    Ruiza, F M; Grigera, J Raúl

    2005-09-01

    Free energy perturbation studies have been performed on Glucoamylase II (471) from Aspergillus awamori var. X100 complexed with three different inhibitors: (+)lentiginosine, (+)(1S,2S,7R,8aS) 1,2,7-trihydroxyindolizidine, (+)(1S,2S,7S,8aS) 1,2,7-trihydroxyindolizidine and the inactive compound (+)(1S,7R,8aS)-1,7-dihydroxyindolizidine. Molecular dynamic simulations were carried out using a recently developed procedure for fast Free Energy Perturbation calculations. In this procedure only a sphere of 1.8 nm around the central atom of the inhibitor is considered in the calculations. Crystallographic restraints are applied over this reduced system using a generated electron density map. The obtained values for the free energy differences agree with experimental data showing the importance of fast calculations in drug design even when the crystallographic structure of the complex is not available. As the method uses only the crystallographic structure of the receptor, it is possible to test the possible efficiency of even still not synthesised ligands, making the pre-selection of compounds much easy and faster.

  5. Spatiotemporal characteristics of electrocortical brain activity during mental calculation.

    PubMed

    Vansteensel, Mariska J; Bleichner, Martin G; Freudenburg, Zac V; Hermes, Dora; Aarnoutse, Erik J; Leijten, Frans S S; Ferrier, Cyrille H; Jansma, Johan Martijn; Ramsey, Nick F

    2014-12-01

    Mental calculation is a complex mental procedure involving a frontoparietal network of brain regions. Functional MRI (fMRI) studies have revealed interesting characteristics of these regions, but the precise function of some areas remains elusive. In the present study, we used electrocorticographic (ECoG) recordings to chronometrically assess the neuronal processes during mental arithmetic. A calculation task was performed during presurgical 3T fMRI scanning and subsequent ECoG monitoring. Mental calculation induced an increase in fMRI blood oxygen level dependent signal in prefrontal, parietal and lower temporo-occipital regions. The group-fMRI result was subsequently used to cluster the implanted electrodes into anatomically defined regions of interest (ROIs). We observed remarkable differences in high frequency power profiles between ROIs, some of which were closely associated with stimulus presentation and others with the response. Upon stimulus presentation, occipital areas were the first to respond, followed by parietal and frontal areas, and finally by motor areas. Notably, we demonstrate that the fMRI activation in the middle frontal gyrus/precentral gyrus is associated with two subfunctions during mental calculation. This finding reveals the significance of the temporal dynamics of neural ensembles within regions with an apparent uniform function. In conclusion, our results shed more light on the spatiotemporal aspects of brain activation during a mental calculation task, and demonstrate that the use of fMRI data to cluster ECoG electrodes is a useful approach for ECoG group analysis. PMID:25044370

  6. Basic ingredients of free energy calculations: a review.

    PubMed

    Christ, Clara D; Mark, Alan E; van Gunsteren, Wilfred F

    2010-06-01

    Methods to compute free energy differences between different states of a molecular system are reviewed with the aim of identifying their basic ingredients and their utility when applied in practice to biomolecular systems. A free energy calculation is comprised of three basic components: (i) a suitable model or Hamiltonian, (ii) a sampling protocol with which one can generate a representative ensemble of molecular configurations, and (iii) an estimator of the free energy difference itself. Alternative sampling protocols can be distinguished according to whether one or more states are to be sampled. In cases where only a single state is considered, six alternative techniques could be distinguished: (i) changing the dynamics, (ii) deforming the energy surface, (iii) extending the dimensionality, (iv) perturbing the forces, (v) reducing the number of degrees of freedom, and (vi) multi-copy approaches. In cases where multiple states are to be sampled, the three primary techniques are staging, importance sampling, and adiabatic decoupling. Estimators of the free energy can be classified as global methods that either count the number of times a given state is sampled or use energy differences. Or, they can be classified as local methods that either make use of the force or are based on transition probabilities. Finally, this overview of the available techniques and how they can be best used in a practical context is aimed at helping the reader choose the most appropriate combination of approaches for the biomolecular system, Hamiltonian and free energy difference of interest.

  7. Free energy calculation of permeation through aquaporin-5

    NASA Astrophysics Data System (ADS)

    Bastien, David

    The work of this paper continues upon the large area of research being done on aquaporins (AQPs). AQPs are proteins that take on the role of facilitating the transfer of substances, mainly water, across cell membranes. There are many different types of AQPs, with each of these highly selective proteins conducting only certain solutes, along with unique permeability rates. The permeation characteristics of aquaporins rely mostly on the residue hydrophobicity and steric restraints of the aromatic arginine (ar/R) region of the protein channel. The purpose of this paper is to analyze the structures of aquaporin-5 (AQP5) and aquaglycerolporin (Glpf), including a radius profile of the respective protein channels, and to compare them to permeation events using steered molecular dynamics (SMD) pulling simulations. Two in silico experiments are performed in order to achieve the free Energy landscape of a single water molecule permeating through the four channels of both Aqp5 and GlpF. The equilibrium free energy curves are calculated from the non-equilibrium, irreversible work measurements using the fluctuation-dissipation theorem (FDT) of Brownian dynamicis (BD). The free energy profiles are then compared and related to the structural profiles of AQP5 and GlpF. The change in free energy across the ar/R region in AQP5 is found to be reasonably larger than that of GlpF. The free energy profiles of AQP5 and GlpF agree with the diameter profile of the channels respectively. Furthermore, free energy calculations are computed for the permeation of Na+ and Cl- ions through the central pore of Aqp5, which provide some insight into the structural mechanisms of AQP5. The free energy barrier for ion transport through the central pore is found to be very large, peaking at around 11 Kcal/mol for chloride and 20 Kcal/mol for sodium.

  8. Quantum calculations for rotational energy transfer in nitrogen molecule collisions

    NASA Astrophysics Data System (ADS)

    Huo, Winifred M.; Green, Sheldon

    1996-05-01

    Rotational energy transfer in collisions of nitrogen molecules has been studied theoretically, using the N2-N2 rigid-rotor potential of van der Avoird et al. [J. Chem. Phys. 84, 1629 (1986)]. For benchmarking purposes, converged close coupling (CC) calculations have been carried out to a total energy of about 200 cm-1. Coupled states (CS) approximation calculations have been carried out to a total energy of 680 cm-1, and infinite order sudden (IOS) approximation calculations have also been carried out. The CC and CS cross sections have been obtained both with and without identical molecule exchange symmetry, whereas exchange was neglected in the IOS calculations. The CS results track the CC cross sections rather well: between 113-219 cm-1 the average deviation is 14%, with accuracy improving at higher energy. Comparison between the CS and IOS cross sections at the high energy end of the CS calculations, 500-680 cm-1, shows that IOS is sensitive to the amount of inelasticity and the results for large ΔJ transitions are subject to larger errors. State-to-state cross sections with even and odd exchange symmetry agree to better than 2% and are well represented as a sum of direct and exchange cross sections for distinguishable molecules, an indication of the applicability of a classical treatment for this system. This result, however, does not apply to partial cross sections for given total J, but arises from a near cancellation of the interference terms between even and odd exchange symmetries on summing over partial waves. In order to compare with experimental data for rotational excitation rates of N2 in the n=1 excited vibrational level colliding with ground vibrational level (n=0) bath N2 molecules, it is assumed that exchange scattering between molecules in different vibrational levels is negligible and direct scattering is independent of n so that distinguishable molecule rigid rotor rates may be used. With these assumptions good agreement is obtained. Although

  9. Dirac Calculations for Proton Inelastic Scattering at Intermediate Energies

    NASA Astrophysics Data System (ADS)

    El-Nohy, N. A.; El-Hammamy, M. N.; Aly, N. E.; Abdel-Moneim, A. M.; Hamza, A. F.

    2016-09-01

    Relativistic proton inelastic scattering from different targets (16O, 24Mg, 28Si, 40Ca, 54Fe, 58Ni, 90Zr, 154Sm, 176Yb, and 208Pb) at intermediate energies is analyzed in the framework of phenomenological optical potentials based on the Dirac formalism. Parameters of the Dirac phenomenological potential with Woods Saxon (WS) shape are obtained. The first order vibrational collective model with one phonon is used to calculate the transition optical potentials to the first low-lying excited state (2+) of the investigated target nuclei. Also, the variation of deformation length (δ) with energy and mass number is studied. It is noticed that the deformation length increases slightly with energy at intermediate range.

  10. On the calculation of the gauge volume size for energy-dispersive X-ray diffraction.

    PubMed

    Rowles, Matthew R

    2011-11-01

    Equations for the calculation of the dimensions of a gauge volume, also known as the active volume or diffraction lozenge, in an energy-dispersive diffraction experiment where the detector is collimated by two ideal slits have been developed. Equations are given for equatorially divergent and parallel incident X-ray beams, assuming negligible axial divergence. PMID:21997921

  11. A Simple Method to Calculate the Temperature Dependence of the Gibbs Energy and Chemical Equilibrium Constants

    ERIC Educational Resources Information Center

    Vargas, Francisco M.

    2014-01-01

    The temperature dependence of the Gibbs energy and important quantities such as Henry's law constants, activity coefficients, and chemical equilibrium constants is usually calculated by using the Gibbs-Helmholtz equation. Although, this is a well-known approach and traditionally covered as part of any physical chemistry course, the required…

  12. SCALE Continuous-Energy Eigenvalue Sensitivity Coefficient Calculations

    DOE PAGES

    Perfetti, Christopher M.; Rearden, Bradley T.; Martin, William R.

    2016-02-25

    Sensitivity coefficients describe the fractional change in a system response that is induced by changes to system parameters and nuclear data. The Tools for Sensitivity and UNcertainty Analysis Methodology Implementation (TSUNAMI) code within the SCALE code system makes use of eigenvalue sensitivity coefficients for an extensive number of criticality safety applications, including quantifying the data-induced uncertainty in the eigenvalue of critical systems, assessing the neutronic similarity between different critical systems, and guiding nuclear data adjustment studies. The need to model geometrically complex systems with improved fidelity and the desire to extend TSUNAMI analysis to advanced applications has motivated the developmentmore » of a methodology for calculating sensitivity coefficients in continuous-energy (CE) Monte Carlo applications. The Contributon-Linked eigenvalue sensitivity/Uncertainty estimation via Tracklength importance CHaracterization (CLUTCH) and Iterated Fission Probability (IFP) eigenvalue sensitivity methods were recently implemented in the CE-KENO framework of the SCALE code system to enable TSUNAMI-3D to perform eigenvalue sensitivity calculations using continuous-energy Monte Carlo methods. This work provides a detailed description of the theory behind the CLUTCH method and describes in detail its implementation. This work explores the improvements in eigenvalue sensitivity coefficient accuracy that can be gained through the use of continuous-energy sensitivity methods and also compares several sensitivity methods in terms of computational efficiency and memory requirements.« less

  13. Exploiting the Properties of Aquaporin to Calculate Free Energy

    NASA Astrophysics Data System (ADS)

    Espejel, Hugo; Chen, Liao

    2010-03-01

    Aquaporins' (AQPs) main purpose is to facilitate the transfer of water molecules through a molecular membrane. We can calculate the free energy of the AQP system when water permeates through it. This is performed using the Visual Molecular Dynamics (VMD) and the Nanoscale Molecular Dynamics (NAMD) programs. In our first set of experiments, AQP is submerged in a body of water, in which case a water molecule near AQP is pulled through the protein. The data is then used to calculate the free energy using two different equations: the Jarzynski equality and the fluctuation-dissipation theorem. The values from both equations are then compared to examine their accuracy. The second set of experiments has the same set up, but now AQP is embedded in a lipid bilayer. We found that both equations give values that are much smaller than kT. This verifies that AQP is a channel for water molecules because the pulling of water gives constant values of free energy. We also found that the water molecules' negative poles were all pointing towards the center of the AQP channel. This means that the process of proton transport in AQP is overwhelmingly difficult.

  14. High-energy photoelectron diffraction: model calculations and future possibilities

    NASA Astrophysics Data System (ADS)

    Winkelmann, Aimo; Fadley, Charles S.; Garcia de Abajo, F. Javier

    2008-11-01

    We discuss the theoretical modeling of x-ray photoelectron diffraction (XPD) with hard x-ray excitation at up to 20 keV, using the dynamical theory of electron diffraction to illustrate the characteristic aspects of the diffraction patterns resulting from such localized emission sources in a multilayer crystal. We show via dynamical calculations for diamond, Si and Fe that the dynamical theory predicts well the available current data for lower energies around 1 keV, and that the patterns for energies above about 1 keV are dominated by Kikuchi bands, which are created by the dynamical scattering of electrons from lattice planes. The origin of the fine structure in such bands is discussed from the point of view of atomic positions in the unit cell. The profiles and positions of the element-specific photoelectron Kikuchi bands are found to be sensitive to lattice distortions (e.g. a 1% tetragonal distortion) and the position of impurities or dopants with respect to lattice sites. We also compare the dynamical calculations with results from a cluster model that is more often used to describe lower energy XPD. We conclude that hard XPD (HXPD) should be capable of providing unique bulk-sensitive structural information for a wide variety of complex materials in future experiments.

  15. Parquet decomposition calculations of the electronic self-energy

    NASA Astrophysics Data System (ADS)

    Gunnarsson, O.; Schäfer, T.; LeBlanc, J. P. F.; Merino, J.; Sangiovanni, G.; Rohringer, G.; Toschi, A.

    2016-06-01

    The parquet decomposition of the self-energy into classes of diagrams, those associated with specific scattering processes, can be exploited for different scopes. In this work, the parquet decomposition is used to unravel the underlying physics of nonperturbative numerical calculations. We show the specific example of dynamical mean field theory and its cluster extensions [dynamical cluster approximation (DCA)] applied to the Hubbard model at half-filling and with hole doping: These techniques allow for a simultaneous determination of two-particle vertex functions and self-energies and, hence, for an essentially "exact" parquet decomposition at the single-site or at the cluster level. Our calculations show that the self-energies in the underdoped regime are dominated by spin-scattering processes, consistent with the conclusions obtained by means of the fluctuation diagnostics approach [O. Gunnarsson et al., Phys. Rev. Lett. 114, 236402 (2015), 10.1103/PhysRevLett.114.236402]. However, differently from the latter approach, the parquet procedure displays important changes with increasing interaction: Even for relatively moderate couplings, well before the Mott transition, singularities appear in different terms, with the notable exception of the predominant spin channel. We explain precisely how these singularities, which partly limit the utility of the parquet decomposition and, more generally, of parquet-based algorithms, are never found in the fluctuation diagnostics procedure. Finally, by a more refined analysis, we link the occurrence of the parquet singularities in our calculations to a progressive suppression of charge fluctuations and the formation of a resonance valence bond state, which are typical hallmarks of a pseudogap state in DCA.

  16. Empirically corrected HEAT method for calculating atomization energies

    SciTech Connect

    Brand, Holmann V

    2008-01-01

    We describe how to increase the accuracy ofthe most recent variants ofthe HEAT method for calculating atomization energies of molecules by means ofextremely simple empirical corrections that depend on stoichiometry and the number ofunpaired electrons in the molecule. Our corrections reduce the deviation from experiment for all the HEAT variants. In particular, our corrections reduce the average absolute deviation and the root-mean-square deviation ofthe 456-QP variant to 0.18 and 0.23 kJoule/mol (i.e., 0.04 and 0.05 kcallmol), respectively.

  17. Science Activities in Energy: Solar Energy II.

    ERIC Educational Resources Information Center

    Oak Ridge Associated Universities, TN.

    Included in this science activities energy package are 14 activities related to solar energy for secondary students. Each activity is outlined on a single card and is introduced by a question such as: (1) how much solar heat comes from the sun? or (2) how many times do you have to run water through a flat-plate collector to get a 10 degree rise in…

  18. Genetic and environmental contributions to brain activation during calculation.

    PubMed

    Pinel, Philippe; Dehaene, Stanislas

    2013-11-01

    Twin studies have long suggested a genetic influence on inter-individual variations in mathematical abilities, and candidate genes have been identified by genome-wide association studies. However, the localization of the brain regions under genetic influence during number manipulation is still unexplored. Here we investigated fMRI data from a group of 19 MZ (monozygotic) and 13 DZ (dizygotic) adult twin pairs, scanned during a mental calculation task. We examined both the activation and the degree of functional lateralization in regions of interest (ROIs) centered on the main activated peaks. Heritability was first investigated by comparing the respective MZ and DZ correlations. Then, genetic and environmental contributions were jointly estimated by fitting a ACE model classically used in twin studies. We found that a subset of the activated network was under genetic influence, encompassing the bilateral posterior superior parietal lobules (PSPL), the right intraparietal sulcus (IPS) and a left superior frontal region. An additional region of the left inferior parietal cortex (IPC), whose deactivation correlated with a behavioral calculation score, also presented higher similarity between MZ than between DZ twins, thus offering a plausible physiological basis for the observable inheritance of math scores. Finally, the main impact of the shared environment was found in the lateralization of activation within the intraparietal sulcus. These maps of genetic and environmental contributions provide precise candidate phenotypes for further genetic association analyses, and illuminate how genetics and education shape the development of number processing networks.

  19. Understanding Iron-based catalysts with efficient Oxygen reduction activity from first-principles calculations

    NASA Astrophysics Data System (ADS)

    Hafiz, Hasnain; Barbiellini, B.; Jia, Q.; Tylus, U.; Strickland, K.; Bansil, A.; Mukerjee, S.

    2015-03-01

    Catalysts based on Fe/N/C clusters can support the oxygen-reduction reaction (ORR) without the use of expensive metals such as platinum. These systems can also prevent some poisonous species to block the active sites from the reactant. We have performed spin-polarized calculations on various Fe/N/C fragments using the Vienna Ab initio Simulation Package (VASP) code. Some results are compared to similar calculations obtained with the Gaussian code. We investigate the partial density of states (PDOS) of the 3d orbitals near the Fermi level and calculate the binding energies of several ligands. Correlations of the binding energies with the 3d electronic PDOS's are used to propose electronic descriptors of the ORR associated with the 3d states of Fe. We also suggest a structural model for the most active site with a ferrous ion (Fe2+) in the high spin state or the so-called Doublet 3 (D3).

  20. Ab initio calculations of free-energy reaction barriers.

    PubMed

    Bucko, T

    2008-02-13

    The theoretical description of chemical reactions was until recently limited to a 'static' approach in which important parameters such as the rate constant are deduced from the local topology of the potential energy surface close to minima and saddle points. Such an approach has, however, serious limitations. The growing computational power allows us now to use advanced simulation techniques to determine entropic effects accurately for medium-sized systems at ab initio level. Recently, we have implemented free-energy simulation techniques based on molecular dynamics, in particular on the blue-moon ensemble technique and on metadynamics, in the popular DFT code VASP. In the thermodynamic integration (blue-moon ensemble) technique, the free-energy profile is calculated as the path integral over the restoring forces along a parametrized reaction coordinate. In metadynamics, an image of the free-energy surface is constructed on the fly during the simulation by adding small repulsive Gaussian-shaped hills to the Lagrangian driving the dynamics. The two methods are tested on a simple chemical reaction-the nucleophilic substitution of methyl chloride by a chlorine anion.

  1. Ab initio calculations of free-energy reaction barriers

    NASA Astrophysics Data System (ADS)

    Bucko, T.

    2008-02-01

    The theoretical description of chemical reactions was until recently limited to a 'static' approach in which important parameters such as the rate constant are deduced from the local topology of the potential energy surface close to minima and saddle points. Such an approach has, however, serious limitations. The growing computational power allows us now to use advanced simulation techniques to determine entropic effects accurately for medium-sized systems at ab initio level. Recently, we have implemented free-energy simulation techniques based on molecular dynamics, in particular on the blue-moon ensemble technique and on metadynamics, in the popular DFT code VASP. In the thermodynamic integration (blue-moon ensemble) technique, the free-energy profile is calculated as the path integral over the restoring forces along a parametrized reaction coordinate. In metadynamics, an image of the free-energy surface is constructed on the fly during the simulation by adding small repulsive Gaussian-shaped hills to the Lagrangian driving the dynamics. The two methods are tested on a simple chemical reaction—the nucleophilic substitution of methyl chloride by a chlorine anion.

  2. Activation calculations for trapped protons below 200 MeV: Appendix

    NASA Technical Reports Server (NTRS)

    Laird, C. E.

    1991-01-01

    Tables are given displaying of the results of the activation calculations of metal samples and other material aboard the Long Duration Exposure Facility-1 (LDEF-1) and Spacelab-2 with the computer program, PTRAP4. The computer printouts give the reaction, the reactant product, the proton reaction cross sections as a function of the energy of the incident protons, and the activation as a function of distance into the sample from the exposed surface.

  3. Preliminary activation calculations for the Poloidal Divertor Experiment

    SciTech Connect

    Judd, J.L.; Scott, A.J.; Nigg, D.W.; Bohn, T.S.

    1981-01-01

    The Poloidal Divertor Experiment (PDX) tokamak is being operated by the Princeton Plasma Physics Laboratory (PPPL) to study plasma cross section shaping, high power neutral beam heating, and divertor control of plasma impurities in tokamaks. Experiments to date have been performed at relatively low power, but with 6 MW of neutral beam power eventually available, high D-D plasma reaction rates are expected that will yield up to 10/sup 15/ 2.45-MeV neutrons per pulse. This neutron emission level is high enough to cause significant neutron-induced machine activation that will limit the occupancy time of personnel entering the room to repair or change parts. The dose rate depends on the location in the room and, of course, the pulsing history prior to entry. This paper describes one-dimensional activation calculations that have been done for PDX to provide preliminary dose rate information for various times after shutdown following one week of high power operation.

  4. Activities for Teaching Solar Energy.

    ERIC Educational Resources Information Center

    Mason, Jack Lee; Cantrell, Joseph S.

    1980-01-01

    Plans and activities are suggested for teaching elementary children about solar energy. Directions are included for constructing a flat plate collector and a solar oven. Activities for a solar field day are given. (SA)

  5. Similarity criteria in calculations of the energy characteristics of a cw oxygen - iodine laser

    SciTech Connect

    Mezhenin, A V; Azyazov, V N

    2012-12-31

    The calculated and experimental data on the energy efficiency of a cw oxygen - iodine laser (OIL) are analysed based on two similarity criteria, namely, on the ratio of the residence time of the gas mixture in the resonator to the characteristic time of extraction of the energy stored in singlet oxygen td and on the gain-to-loss ratio {Pi}. It is shown that the simplified two-level laser model satisfactorily predicts the output characteristics of OILs with a stable resonator at {tau}{sub d} {<=} 7. Efficient energy extraction from the OIL active medium is achieved in the case of {tau}{sub d} = 5 - 7, {Pi} = 4 - 8. (lasers)

  6. Tables for simplifying calculations of activities produced by thermal neutrons

    USGS Publications Warehouse

    Senftle, F.E.; Champion, W.R.

    1954-01-01

    The method of calculation described is useful for the types of work of which examples are given. It is also useful in making rapid comparison of the activities that might be expected from several different elements. For instance, suppose it is desired to know which of the three elements, cobalt, nickel, or vanadium is, under similar conditions, activated to the greatest extent by thermal neutrons. If reference is made to a cross-section table only, the values may be misleading unless properly interpreted by a suitable comparison of half-lives and abundances. In this table all the variables have been combined and the desired information can be obtained directly from the values of A 3??, the activity produced per gram per second of irradiation, under the stated conditions. Hence, it is easily seen that, under similar circumstances of irradiation, vanadium is most easily activated even though the cross section of one of the cobalt isotopes is nearly five times that of vanadium and the cross section of one of the nickel isotopes is three times that of vanadium. ?? 1954 Societa?? Italiana di Fisica.

  7. INDIVIDUALISED CALCULATION OF TISSUE IMPARTED ENERGY IN BREAST TOMOSYNTHESIS.

    PubMed

    Geeraert, N; Klausz, R; Muller, S; Bloch, I; Bosmans, H

    2016-06-01

    The imparted energy to the glandular tissue in the breast (glandular imparted energy, GIE) is proposed for an improved assessment of the individual radiation-induced risk resulting from X-ray breast imaging. GIE is computed from an estimation of the quantity and localisation of glandular tissue in the breast. After a digital breast tomosynthesis (DBT) acquisition, the volumetric glandular content (volumetric breast density, VBD) is computed from the central X-ray projection. The glandular tissue distribution is determined by labelling the DBT voxels to ensure the conservation of the VBD. Finally, the GIE is calculated by Monte Carlo computation on the resulting tissue-labelled DBT volume. For verification, the method was applied to 10 breast-shaped digital phantoms made of different glandular spheres in an adipose background, and to a digital anthropomorphic phantom. Results were compared to direct GIE computations on the phantoms considered as 'ground-truth'. The major limitations in accuracy are those of DBT, in particular the limited z-resolution. However, for most phantoms, the results can be considered as acceptable.

  8. Calculations of Solvation Free Energy through Energy Reweighting from Molecular Mechanics to Quantum Mechanics.

    PubMed

    Jia, Xiangyu; Wang, Meiting; Shao, Yihan; König, Gerhard; Brooks, Bernard R; Zhang, John Z H; Mei, Ye

    2016-02-01

    In this work, the solvation free energies of 20 organic molecules from the 4th Statistical Assessment of the Modeling of Proteins and Ligands (SAMPL4) have been calculated. The sampling of phase space is carried out at a molecular mechanical level, and the associated free energy changes are estimated using the Bennett Acceptance Ratio (BAR). Then the quantum mechanical (QM) corrections are computed through the indirect Non-Boltzmann Bennett's acceptance ratio (NBB) or the thermodynamics perturbation (TP) method. We show that BAR+TP gives a minimum analytic variance for the calculated solvation free energy at the Gaussian limit and performs slightly better than NBB in practice. Furthermore, the expense of the QM calculations in TP is only half of that in NBB. We also show that defining the biasing potential as the difference of the solute-solvent interaction energy, instead of the total energy, can converge the calculated solvation free energies much faster but possibly to different values. Based on the experimental solvation free energies which have been published before, it is discovered in this study that BLYP yields better results than MP2 and some other later functionals such as B3LYP, M06-2X, and ωB97X-D. PMID:26731197

  9. Calculations of Solvation Free Energy through Energy Reweighting from Molecular Mechanics to Quantum Mechanics.

    PubMed

    Jia, Xiangyu; Wang, Meiting; Shao, Yihan; König, Gerhard; Brooks, Bernard R; Zhang, John Z H; Mei, Ye

    2016-02-01

    In this work, the solvation free energies of 20 organic molecules from the 4th Statistical Assessment of the Modeling of Proteins and Ligands (SAMPL4) have been calculated. The sampling of phase space is carried out at a molecular mechanical level, and the associated free energy changes are estimated using the Bennett Acceptance Ratio (BAR). Then the quantum mechanical (QM) corrections are computed through the indirect Non-Boltzmann Bennett's acceptance ratio (NBB) or the thermodynamics perturbation (TP) method. We show that BAR+TP gives a minimum analytic variance for the calculated solvation free energy at the Gaussian limit and performs slightly better than NBB in practice. Furthermore, the expense of the QM calculations in TP is only half of that in NBB. We also show that defining the biasing potential as the difference of the solute-solvent interaction energy, instead of the total energy, can converge the calculated solvation free energies much faster but possibly to different values. Based on the experimental solvation free energies which have been published before, it is discovered in this study that BLYP yields better results than MP2 and some other later functionals such as B3LYP, M06-2X, and ωB97X-D.

  10. Soil biological activity at European scale - two calculation concepts

    NASA Astrophysics Data System (ADS)

    Krüger, Janine; Rühlmann, Jörg

    2014-05-01

    The CATCH-C project aims to identify and improve the farm-compatibility of Soil Management Practices including to promote productivity, climate change mitigation and soil quality. The focus of this work concentrates on turnover conditions for soil organic matter (SOM). SOM is fundamental for the maintenance of quality and functions of soils while SOM storage is attributed a great importance in terms of climate change mitigation. The turnover conditions depend on soil biological activity characterized by climate and soil properties. To assess the turnover conditions two model concepts are applied: (I) Biological active time (BAT) regression approach derived from CANDY model (Franko & Oelschlägel 1995) expresses the variation of air temperature, precipitation and soil texture as a timescale and an indicator of biological activity for soil organic matter (SOM) turnover. (II) Re_clim parameter within the Introductory Carbon Balance Model (Andrén & Kätterer 1997) states the soil temperature and soil water to estimate soil biological activity. The modelling includes two strategies to cover the European scale and conditions. BAT was calculated on a 20x20 km grid basis. The European data sets of precipitation and air temperature (time period 1901-2000, monthly resolution), (Mitchell et al. 2004) were used to derive long-term averages. As we focus on agricultural areas we included CORINE data (2006) to extract arable land. The resulting BATs under co-consideration of the main soil textures (clay, silt, sand and loam) were investigated per environmental zone (ENZs, Metzger et al. 2005) that represents similar conditions for precipitation, temperature and relief to identify BAT ranges and hence turnover conditions for each ENZ. Re_clim was quantified by climatic time series of more than 250 weather stations across Europe presented by Klein Tank et al. (2002). Daily temperature, precipitation and potential evapotranspiration (maximal thermal extent) were used to calculate

  11. Calculation of optical second-harmonic susceptibilities and optical activity for crystals

    SciTech Connect

    Levine, Z.H.

    1994-12-31

    A new generation of nearly first-principles calculations predicts both the linear and second-harmonic susceptibilities for a variety of insulating crystals, including GaAs, GaP, AlAs, AlP, Se, {alpha}-quartz, and c-urea. The results are typically in agreement with experimental measurements. The calculations have been extended to optical activity, with somewhat less success to date. The theory, based on a simple self-energy correction to the local density approximation, and results are reviewed herein.

  12. 5 CFR 591.220 - How does OPM calculate energy utility cost indexes?

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false How does OPM calculate energy utility... Areas Cost-Of-Living Allowances § 591.220 How does OPM calculate energy utility cost indexes? (a) OPM calculates energy utility cost indexes based on the relative cost of maintaining a standard size dwelling...

  13. Identification of HIV Inhibitors Guided by Free Energy Perturbation Calculations

    PubMed Central

    Acevedo, Orlando; Ambrose, Zandrea; Flaherty, Patrick T.; Aamer, Hadega; Jain, Prashi; Sambasivarao, Somisetti V.

    2013-01-01

    Free energy perturbation (FEP) theory coupled to molecular dynamics (MD) or Monte Carlo (MC) statistical mechanics offers a theoretically precise method for determining the free energy differences of related biological inhibitors. Traditionally requiring extensive computational resources and expertise, it is only recently that its impact is being felt in drug discovery. A review of computer-aided anti-HIV efforts employing FEP calculations is provided here that describes early and recent successes in the design of human immunodeficiency virus type 1 (HIV-1) protease and non-nucleoside reverse transcriptase inhibitors. In addition, our ongoing work developing and optimizing leads for small molecule inhibitors of cyclophilin A (CypA) is highlighted as an update on the current capabilities of the field. CypA has been shown to aid HIV-1 replication by catalyzing the cis/trans isomerization of a conserved Gly-Pro motif in the N-terminal domain of HIV-1 capsid (CA) protein. In the absence of a functional CypA, e.g., by the addition of an inhibitor such as cyclosporine A (CsA), HIV-1 has reduced infectivity. Our simulations of acylurea-based and 1-indanylketone-based CypA inhibitors have determined that their nanomolar and micromolar binding affinities, respectively, are tied to their ability to stabilize Arg55 and Asn102. A structurally novel 1-(2,6-dichlorobenzamido) indole core was proposed to maximize these interactions. FEP-guided optimization, experimental synthesis, and biological testing of lead compounds for toxicity and inhibition of wild-type HIV-1 and CA mutants have demonstrated a dose-dependent inhibition of HIV-1 infection in two cell lines. While the inhibition is modest compared to CsA, the results are encouraging. PMID:22316150

  14. First-principles calculations of the OH- adsorption energy on perovskite oxide

    NASA Astrophysics Data System (ADS)

    Ohzuku, Hideo; Ikeno, Hidekazu; Yamada, Ikuya; Yagi, Shunsuke

    2016-08-01

    The oxygen evolution reaction (OER) that occurs during water oxidation is of considerable importance as an essential energy conversion reaction for rechargeable metal-air batteries and direct solar water splitting. ABO3 perovskite oxides have been extensively studied because of their high catalytic OER activity. In the present study, the OH- adsorption process on the perovskite surface about different B site cations was investigated by the first-principles calculations. We concluded that the adsorption energy of SrFeO3 surface is larger than that of SrTiO3.

  15. Caveat Emptor: Calculating All the Costs of Energy.

    ERIC Educational Resources Information Center

    Zinberg, Dorothy S.

    This paper examines the energy problem. Specific topics discussed include the recent history of oil and gas consumption in the United States, conservation, coal, solar energy, and nuclear energy. While solutions to the energy problem differ, there is an urgent need for broad, public debate. Ultimately, the decisions made regarding energy will be…

  16. Automatic generation of active coordinates for quantum dynamics calculations: Application to the dynamics of benzene photochemistry

    SciTech Connect

    Lasorne, Benjamin; Sicilia, Fabrizio; Bearpark, Michael J.; Robb, Michael A.; Worth, Graham A.; Blancafort, Lluis

    2008-03-28

    A new practical method to generate a subspace of active coordinates for quantum dynamics calculations is presented. These reduced coordinates are obtained as the normal modes of an analytical quadratic representation of the energy difference between excited and ground states within the complete active space self-consistent field method. At the Franck-Condon point, the largest negative eigenvalues of this Hessian correspond to the photoactive modes: those that reduce the energy difference and lead to the conical intersection; eigenvalues close to 0 correspond to bath modes, while modes with large positive eigenvalues are photoinactive vibrations, which increase the energy difference. The efficacy of quantum dynamics run in the subspace of the photoactive modes is illustrated with the photochemistry of benzene, where theoretical simulations are designed to assist optimal control experiments.

  17. Calculation of Raman optical activity spectra for vibrational analysis.

    PubMed

    Mutter, Shaun T; Zielinski, François; Popelier, Paul L A; Blanch, Ewan W

    2015-05-01

    By looking back on the history of Raman Optical Activity (ROA), the present article shows that the success of this analytical technique was for a long time hindered, paradoxically, by the deep level of detail and wealth of structural information it can provide. Basic principles of the underlying theory are discussed, to illustrate the technique's sensitivity due to its physical origins in the delicate response of molecular vibrations to electromagnetic properties. Following a short review of significant advances in the application of ROA by UK researchers, we dedicate two extensive sections to the technical and theoretical difficulties that were overcome to eventually provide predictive power to computational simulations in terms of ROA spectral calculation. In the last sections, we focus on a new modelling strategy that has been successful in coping with the dramatic impact of solvent effects on ROA analyses. This work emphasises the role of complementarity between experiment and theory for analysing the conformations and dynamics of biomolecules, so providing new perspectives for methodological improvements and molecular modelling development. For the latter, an example of a next-generation force-field for more accurate simulations and analysis of molecular behaviour is presented. By improving the accuracy of computational modelling, the analytical capabilities of ROA spectroscopy will be further developed so generating new insights into the complex behaviour of molecules.

  18. The importance of geospatial data to calculate the optimal distribution of renewable energies

    NASA Astrophysics Data System (ADS)

    Díaz, Paula; Masó, Joan

    2013-04-01

    Specially during last three years, the renewable energies are revolutionizing the international trade while they are geographically diversifying markets. Renewables are experiencing a rapid growth in power generation. According to REN21 (2012), during last six years, the total renewables capacity installed grew at record rates. In 2011, the EU raised its share of global new renewables capacity till 44%. The BRICS nations (Brazil, Russia, India and China) accounted for about 26% of the total global. Moreover, almost twenty countries in the Middle East, North Africa, and sub-Saharan Africa have currently active markets in renewables. The energy return ratios are commonly used to calculate the efficiency of the traditional energy sources. The Energy Return On Investment (EROI) compares the energy returned for a certain source and the energy used to get it (explore, find, develop, produce, extract, transform, harvest, grow, process, etc.). These energy return ratios have demonstrated a general decrease of efficiency of the fossil fuels and gas. When considering the limitations of the quantity of energy produced by some sources, the energy invested to obtain them and the difficulties of finding optimal locations for the establishment of renewables farms (e.g. due to an ever increasing scarce of appropriate land) the EROI becomes relevant in renewables. A spatialized EROI, which uses variables with spatial distribution, enables the optimal position in terms of both energy production and associated costs. It is important to note that the spatialized EROI can be mathematically formalized and calculated the same way for different locations in a reproducible way. This means that having established a concrete EROI methodology it is possible to generate a continuous map that will highlight the best productive zones for renewable energies in terms of maximum energy return at minimum cost. Relevant variables to calculate the real energy invested are the grid connections between

  19. Chemical activation through super energy transfer collisions.

    PubMed

    Smith, Jonathan M; Nikow, Matthew; Ma, Jianqiang; Wilhelm, Michael J; Han, Yong-Chang; Sharma, Amit R; Bowman, Joel M; Dai, Hai-Lung

    2014-02-01

    Can a molecule be efficiently activated with a large amount of energy in a single collision with a fast atom? If so, this type of collision will greatly affect molecular reactivity and equilibrium in systems where abundant hot atoms exist. Conventional expectation of molecular energy transfer (ET) is that the probability decreases exponentially with the amount of energy transferred, hence the probability of what we label "super energy transfer" is negligible. We show, however, that in collisions between an atom and a molecule for which chemical reactions may occur, such as those between a translationally hot H atom and an ambient acetylene (HCCH) or sulfur dioxide, ET of chemically significant amounts of energy commences with surprisingly high efficiency through chemical complex formation. Time-resolved infrared emission observations are supported by quasi-classical trajectory calculations on a global ab initio potential energy surface. Results show that ∼10% of collisions between H atoms moving with ∼60 kcal/mol energy and HCCH result in transfer of up to 70% of this energy to activate internal degrees of freedom.

  20. CALCULATION OF GAMMA SPECTRA IN A PLASTIC SCINTILLATOR FOR ENERGY CALIBRATIONAND DOSE COMPUTATION.

    PubMed

    Kim, Chankyu; Yoo, Hyunjun; Kim, Yewon; Moon, Myungkook; Kim, Jong Yul; Kang, Dong Uk; Lee, Daehee; Kim, Myung Soo; Cho, Minsik; Lee, Eunjoong; Cho, Gyuseong

    2016-09-01

    Plastic scintillation detectors have practical advantages in the field of dosimetry. Energy calibration of measured gamma spectra is important for dose computation, but it is not simple in the plastic scintillators because of their different characteristics and a finite resolution. In this study, the gamma spectra in a polystyrene scintillator were calculated for the energy calibration and dose computation. Based on the relationship between the energy resolution and estimated energy broadening effect in the calculated spectra, the gamma spectra were simply calculated without many iterations. The calculated spectra were in agreement with the calculation by an existing method and measurements. PMID:27127208

  1. Calculations of the response of shielded detectors to gamma rays at MeV-range energies

    SciTech Connect

    R. C. Byrd

    2000-03-01

    Nuclear instruments designed to detect gamma rays at energies from 0.1 to 10 MeV respond primarily to the electrons produced by gamma-ray scattering and absorption in either the instrument itself or in the surrounding materials. Although tabulated attenuation coefficients are very useful for estimating macroscopic quantities such as bulk energy depositions, such quantities are averages over several different phenomena at the microscopic level. For detectors with active elements that are thin compared with an electron range, the competing effects of inscattering and outscattering result in complicated responses, as evidenced by the strong energy dependence of the resulting pulse-height spectra. Thus, for some applications the macroscopic averages are entirely sufficient, but for others a full microscopic analysis is needed. The author first reviews the literature on the responses of several types of detectors to gamma rays at energies below 10 MeV, and then they use a series of simple Monte Carlo calculations to illustrate the important physics issues. These simple calculations are followed by thorough studies of the energy and angle responses of two proposed instruments, including their responses to instantaneous pulses of large numbers of simultaneous incident photons.

  2. On the possibility of negative activation energies in bimolecular reactions

    NASA Technical Reports Server (NTRS)

    Jaffe, R. L.

    1978-01-01

    The temperature dependence of the rate constants for model reacting systems was studied to understand some recent experimental measurements which imply the existence of negative activation energies. A collision theory model and classical trajectory calculations are used to demonstrate that the reaction probability can vary inversely with collision energy for bimolecular reactions occurring on attractive potential energy surfaces. However, this is not a sufficient condition to ensure that the rate constant has a negative temperature dependence. On the basis of these calculations, it seems unlikely that a true bimolecular reaction between neutral molecules will have a negative activation energy.

  3. Analytical calculation of proton linear energy transfer in voxelized geometries including secondary protons

    NASA Astrophysics Data System (ADS)

    Sanchez-Parcerisa, D.; Cortés-Giraldo, M. A.; Dolney, D.; Kondrla, M.; Fager, M.; Carabe, A.

    2016-02-01

    In order to integrate radiobiological modelling with clinical treatment planning for proton radiotherapy, we extended our in-house treatment planning system FoCa with a 3D analytical algorithm to calculate linear energy transfer (LET) in voxelized patient geometries. Both active scanning and passive scattering delivery modalities are supported. The analytical calculation is much faster than the Monte-Carlo (MC) method and it can be implemented in the inverse treatment planning optimization suite, allowing us to create LET-based objectives in inverse planning. The LET was calculated by combining a 1D analytical approach including a novel correction for secondary protons with pencil-beam type LET-kernels. Then, these LET kernels were inserted into the proton-convolution-superposition algorithm in FoCa. The analytical LET distributions were benchmarked against MC simulations carried out in Geant4. A cohort of simple phantom and patient plans representing a wide variety of sites (prostate, lung, brain, head and neck) was selected. The calculation algorithm was able to reproduce the MC LET to within 6% (1 standard deviation) for low-LET areas (under 1.7 keV μm-1) and within 22% for the high-LET areas above that threshold. The dose and LET distributions can be further extended, using radiobiological models, to include radiobiological effectiveness (RBE) calculations in the treatment planning system. This implementation also allows for radiobiological optimization of treatments by including RBE-weighted dose constraints in the inverse treatment planning process.

  4. Analytical calculation of proton linear energy transfer in voxelized geometries including secondary protons.

    PubMed

    Sanchez-Parcerisa, D; Cortés-Giraldo, M A; Dolney, D; Kondrla, M; Fager, M; Carabe, A

    2016-02-21

    In order to integrate radiobiological modelling with clinical treatment planning for proton radiotherapy, we extended our in-house treatment planning system FoCa with a 3D analytical algorithm to calculate linear energy transfer (LET) in voxelized patient geometries. Both active scanning and passive scattering delivery modalities are supported. The analytical calculation is much faster than the Monte-Carlo (MC) method and it can be implemented in the inverse treatment planning optimization suite, allowing us to create LET-based objectives in inverse planning. The LET was calculated by combining a 1D analytical approach including a novel correction for secondary protons with pencil-beam type LET-kernels. Then, these LET kernels were inserted into the proton-convolution-superposition algorithm in FoCa. The analytical LET distributions were benchmarked against MC simulations carried out in Geant4. A cohort of simple phantom and patient plans representing a wide variety of sites (prostate, lung, brain, head and neck) was selected. The calculation algorithm was able to reproduce the MC LET to within 6% (1 standard deviation) for low-LET areas (under 1.7 keV μm(-1)) and within 22% for the high-LET areas above that threshold. The dose and LET distributions can be further extended, using radiobiological models, to include radiobiological effectiveness (RBE) calculations in the treatment planning system. This implementation also allows for radiobiological optimization of treatments by including RBE-weighted dose constraints in the inverse treatment planning process.

  5. Enhanced photoelectrochemical activity for Cu and Ti doped hematite: The first principles calculations

    SciTech Connect

    Meng, X. Y.; Qin, G. W.; Li, S.; Ren, Y. P.; Pei, W. L.; Zuo, L.; Wen, X. H.

    2011-03-14

    To improve photoelectrochemical (PEC) activity of hematite, the modification of energy band by doping 3d transition metal ions Cu and Ti into {alpha}-Fe{sub 2}O{sub 3} were studied via the first-principles calculations with density function theory (DFT)+U method. The results show that the band gap of hematite is {approx}2.1 eV and n-type dopant Ti improves the electric conductivity, confirmed by recent experiments. The p-type dopant Cu enhances the utilization ratio of solar energy, shifts both valance, and conduction band edges to a higher energy level, satisfying hydrogen production in the visible light driven PEC water splitting without voltage bias.

  6. Multiscale modeling approach for calculating grain-boundary energies from first principles

    SciTech Connect

    Shenderova, O.A.; Brenner, D.W.; Nazarov, A.A.; Romanov, A.E.; Yang, L.H.

    1998-02-01

    A multiscale modeling approach is proposed for calculating energies of tilt-grain boundaries in covalent materials from first principles over an entire misorientation range for given tilt axes. The method uses energies from density-functional calculations for a few key structures as input into a disclination structural-units model. This approach is demonstrated by calculating energies of {l_angle}001{r_angle}-symmetrical tilt-grain boundaries in diamond. {copyright} {ital 1998} {ital The American Physical Society}

  7. A Simplified Confinement Method (SCM) for Calculating Absolute Free Energies and Free Energy and Entropy Differences

    PubMed Central

    Ovchinnikov, Victor; Cecchini, Marco; Karplus, Martin

    2013-01-01

    A simple and robust formulation of the path-independent confinement method for the calculation of free energies is presented. The simplified confinement method (SCM) does not require matrix diagonalization or switching off the molecular force field, and has a simple convergence criterion. The method can be readily implemented in molecular dynamics programs with minimal or no code modifications. Because the confinement method is a special case of thermodynamic integration, it is trivially parallel over the integration variable. The accuracy of the method is demonstrated using a model diatomic molecule, for which exact results can be computed analytically. The method is then applied to the alanine dipeptide in vacuum, and to the α-helix ↔ β-sheet transition in a sixteen-residue peptide modeled in implicit solvent. The SCM requires less effort for the calculation of free energy differences than previous formulations because it does not require computing normal modes. The SCM has a diminished advantage for determining absolute free energy values, because it requires decreasing the MD integration step to obtain accurate results. An approximate confinement procedure is introduced, which can be used to estimate directly the configurational entropy difference between two macrostates, without the need for additional computation of the difference in the free energy or enthalpy. The approximation has similar convergence properties as the standard confinement method for the calculation of free energies. The use of the approximation requires about five times less wall-clock simulation time than that needed to compute enthalpy differences to similar precision from an MD trajectory. For the biomolecular systems considered in this study, the errors in the entropy approximation are under 10%. The approximation will therefore be most useful for cases in which the dominant source of error is insufficient sampling in the estimation of enthalpies, as arises in simulations of large

  8. Programmable electronic calculator in underground corrosion related activity. Part 1

    SciTech Connect

    Seifert, R.L.

    1980-06-01

    Tennessee Gas Pipeline Co. has developed programs for Hewlett-Packard HP-97 and HP-67 programmable calculators that relate to general corrosion-control operations in the gas pipeline industry. The first program describes in a fairly simple manner 1) the pressures that steel pipe can withstand with changes in the wall thickness and pipe diameter, 2) the strength of high or lower alloy steels, and 3) the properties or dimensions required for a given operating pressure. The program also considers the mandated safety factors (as required in populated areas, for example) in the calculated pipeline parameters.

  9. A calculation of the diffusion energies for adatoms on surfaces of F.C.C. metals

    NASA Technical Reports Server (NTRS)

    Halicioglu, T.; Pound, G. M.

    1979-01-01

    The activation energies for diffusion were determined for gold, platinum and iridium adatoms on plane and plane PT surfaces and were found to be in good agreement with the measurements reported by Bassett and Webber. The Lennard-Jones pair potentials were used to model the interatomic forces, and relaxation of the substrate atoms in near proximity to the adatom was considered in detail. The present calculations clarify the mechanism of the observed two-dimensional diffusion of platinum and iridium atoms on a plane PT surface. The results are compared with those obtained using Morse potential functions and different relaxation techniques.

  10. Solar Energy Project, Activities: Biology.

    ERIC Educational Resources Information Center

    Tullock, Bruce, Ed.; And Others

    This guide contains lesson plans and outlines of science activities which present concepts of solar energy in the context of biology experiments. Each unit presents an introduction; objectives; skills and knowledge needed; materials; methods; questions; recommendations for further work; and a teacher information sheet. The teacher information…

  11. Activation energy measurements of cheese

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Temperature sweeps of cheeses using small amplitude oscillatory shear tests produced values for activation energy of flow (Ea) between 30 and 44 deg C. Soft goat cheese and Queso Fresco, which are high-moisture cheeses and do not flow when heated, exhibited Ea values between 30 and 60 kJ/mol. The ...

  12. Impact of dietary fiber energy on the calculation of food total energy value in the Brazilian Food Composition Database.

    PubMed

    Menezes, Elizabete Wenzel de; Grande, Fernanda; Giuntini, Eliana Bistriche; Lopes, Tássia do Vale Cardoso; Dan, Milana Cara Tanasov; Prado, Samira Bernardino Ramos do; Franco, Bernadette Dora Gombossy de Melo; Charrondière, U Ruth; Lajolo, Franco Maria

    2016-02-15

    Dietary fiber (DF) contributes to the energy value of foods and including it in the calculation of total food energy has been recommended for food composition databases. The present study aimed to investigate the impact of including energy provided by the DF fermentation in the calculation of food energy. Total energy values of 1753 foods from the Brazilian Food Composition Database were calculated with or without the inclusion of DF energy. The energy values were compared, through the use of percentage difference (D%), in individual foods and in daily menus. Appreciable energy D% (⩾10) was observed in 321 foods, mainly in the group of vegetables, legumes and fruits. However, in the Brazilian typical menus containing foods from all groups, only D%<3 was observed. In mixed diets, the DF energy may cause slight variations in total energy; on the other hand, there is appreciable energy D% for certain foods, when individually considered.

  13. Sensitivity of methods for calculating energy expenditure by use of doubly labeled water

    SciTech Connect

    Seale, J.; Miles, C.; Bodwell, C.E.

    1989-02-01

    Attempts to estimate human energy expenditure by use of doubly labeled water have produced three methods currently used for calculating carbon dioxide production from isotope disappearance data: (1) the two-point method, (2) the regression method, and (3) the integration method. An ideal data set was used to determine the error produced in the calculated energy expenditure for each method when specific variables were perturbed. The analysis indicates that some of the calculation methods are more susceptible to perturbations in certain variables than others. Results from an experiment on one adult human subject are used to illustrate the potential for error in actual data. Samples of second void urine, 24-h urine, and breath collected every other day for 21 days are used to calculate the average daily energy expenditure by three calculation methods. The difference between calculated energy expenditure and metabolizable energy on a weight-maintenance diet is used to estimate the error associated with the doubly labeled water method.

  14. Alternative definitions of the frozen energy in energy decomposition analysis of density functional theory calculations.

    PubMed

    Horn, Paul R; Head-Gordon, Martin

    2016-02-28

    In energy decomposition analysis (EDA) of intermolecular interactions calculated via density functional theory, the initial supersystem wavefunction defines the so-called "frozen energy" including contributions such as permanent electrostatics, steric repulsions, and dispersion. This work explores the consequences of the choices that must be made to define the frozen energy. The critical choice is whether the energy should be minimized subject to the constraint of fixed density. Numerical results for Ne2, (H2O)2, BH3-NH3, and ethane dissociation show that there can be a large energy lowering associated with constant density orbital relaxation. By far the most important contribution is constant density inter-fragment relaxation, corresponding to charge transfer (CT). This is unwanted in an EDA that attempts to separate CT effects, but it may be useful in other contexts such as force field development. An algorithm is presented for minimizing single determinant energies at constant density both with and without CT by employing a penalty function that approximately enforces the density constraint.

  15. Alternative definitions of the frozen energy in energy decomposition analysis of density functional theory calculations

    NASA Astrophysics Data System (ADS)

    Horn, Paul R.; Head-Gordon, Martin

    2016-02-01

    In energy decomposition analysis (EDA) of intermolecular interactions calculated via density functional theory, the initial supersystem wavefunction defines the so-called "frozen energy" including contributions such as permanent electrostatics, steric repulsions, and dispersion. This work explores the consequences of the choices that must be made to define the frozen energy. The critical choice is whether the energy should be minimized subject to the constraint of fixed density. Numerical results for Ne2, (H2O)2, BH3-NH3, and ethane dissociation show that there can be a large energy lowering associated with constant density orbital relaxation. By far the most important contribution is constant density inter-fragment relaxation, corresponding to charge transfer (CT). This is unwanted in an EDA that attempts to separate CT effects, but it may be useful in other contexts such as force field development. An algorithm is presented for minimizing single determinant energies at constant density both with and without CT by employing a penalty function that approximately enforces the density constraint.

  16. Energy levels of isoelectronic impurities by large scale LDA calculations

    SciTech Connect

    Li, Jingbo; Wang, Lin-Wang

    2002-11-22

    Isoelectronic impurity states are localized states induced by stoichiometric single atom substitution in bulk semiconductor. Photoluminescence spectra indicate deep impurity levels of 0.5 to 0.9eV above the top of valence band for systems like: GaN:As, GaN:P, CdS:Te, ZnS:Te. Previous calculations based on small supercells seemingly confirmed these experimental results. However, the current ab initio calculations based on thousand atom supercells indicate that the impurity levels of the above systems are actually much shallower(0.04 to 0.23 eV), and these impurity levels should be compared with photoluminescence excitation spectra, not photoluminescence spectra.

  17. Quantum chemical calculations of the reorganization energy of blue-copper proteins.

    PubMed Central

    Olsson, M. H.; Ryde, U.; Roos, B. O.

    1998-01-01

    The inner-sphere reorganization energy for several copper complexes related to the active site in blue-copper protein has been calculated with the density functional B3LYP method. The best model of the blue-copper proteins, Cu(Im)2(SCH3)(S(CH3)2)(0/+), has a self-exchange inner-sphere reorganization energy of 62 kJ/mol, which is at least 120 kJ/mol lower than for Cu(H2O)4(+/2+). This lowering of the reorganization energy is caused by the soft ligands in the blue-copper site, especially the cysteine thiolate and the methionine thioether groups. Soft ligands both make the potential surfaces of the complexes flatter and give rise to oxidized structures that are quite close to a tetrahedron (rather than tetragonal). Approximately half of the reorganization energy originates from changes in the copper-ligand bond lengths and half of this contribution comes from the Cu-S(Cys) bond. A tetragonal site, which is present in the rhombic type 1 blue-copper proteins, has a slightly higher (16 kJ/mol) inner-sphere reorganization energy than a trigonal site, present in the axial type 1 copper proteins. A site with the methionine ligand replaced by an amide group, as in stellacyanin, has an even higher reorganization energy, about 90 kJ/mol. PMID:9865961

  18. A Variational Approach to Enhanced Sampling and Free Energy Calculations

    NASA Astrophysics Data System (ADS)

    Parrinello, Michele

    2015-03-01

    The presence of kinetic bottlenecks severely hampers the ability of widely used sampling methods like molecular dynamics or Monte Carlo to explore complex free energy landscapes. One of the most popular methods for addressing this problem is umbrella sampling which is based on the addition of an external bias which helps overcoming the kinetic barriers. The bias potential is usually taken to be a function of a restricted number of collective variables. However constructing the bias is not simple, especially when the number of collective variables increases. Here we introduce a functional of the bias which, when minimized, allows us to recover the free energy. We demonstrate the usefulness and the flexibility of this approach on a number of examples which include the determination of a six dimensional free energy surface. Besides the practical advantages, the existence of such a variational principle allows us to look at the enhanced sampling problem from a rather convenient vantage point.

  19. Variational Approach to Enhanced Sampling and Free Energy Calculations

    NASA Astrophysics Data System (ADS)

    Valsson, Omar; Parrinello, Michele

    2014-08-01

    The ability of widely used sampling methods, such as molecular dynamics or Monte Carlo simulations, to explore complex free energy landscapes is severely hampered by the presence of kinetic bottlenecks. A large number of solutions have been proposed to alleviate this problem. Many are based on the introduction of a bias potential which is a function of a small number of collective variables. However constructing such a bias is not simple. Here we introduce a functional of the bias potential and an associated variational principle. The bias that minimizes the functional relates in a simple way to the free energy surface. This variational principle can be turned into a practical, efficient, and flexible sampling method. A number of numerical examples are presented which include the determination of a three-dimensional free energy surface. We argue that, beside being numerically advantageous, our variational approach provides a convenient and novel standpoint for looking at the sampling problem.

  20. Synthesis, structure, theoretical calculations and biological activity of sulfonate active ester new derivatives

    NASA Astrophysics Data System (ADS)

    Ghazzali, Mohamed; Khattab, Sherine A. N.; Elnakady, Yasser A.; Al-Mekhlafi, Fahd A.; Al-Farhan, Khalid; El-Faham, Ayman

    2013-08-01

    A series of naphthyl and tolyl sulfonate ester were synthesized and characterized by H NMR. X-ray single crystal diffraction experiments established the molecular structure of three new sulfonate esters derivatives, and spectral data agree with these in solution. The observed hydrogen bonding is discussed on the basis of crystal structural analyses and DFT/MP2 geometry optimization quantum calculations. Antimicrobial activities were screened for selected compounds against three human cancer cell lines and Mosquito Culex pipiens larvae.

  1. Protein unfolding from free-energy calculations: Integration of the Gaussian network model with bond binding energies

    NASA Astrophysics Data System (ADS)

    Srivastava, Amit; Granek, Rony

    2015-02-01

    Motivated by single molecule experiments, we study thermal unfolding pathways of four proteins, chymotrypsin inhibitor, barnase, ubiquitin, and adenylate kinase, using bond network models that combine bond energies and elasticity. The protein elasticity is described by the Gaussian network model (GNM), to which we add prescribed bond binding energies that are assigned to all (nonbackbone) connecting bonds in the GNM of native state and assumed identical for simplicity. Using exact calculation of the Helmholtz free energy for this model, we consider bond rupture single events. The bond designated for rupture is chosen by minimizing the free-energy difference for the process, over all (nonbackbone) bonds in the network. Plotting the free-energy profile along this pathway at different temperatures, we observe a few major partial unfolding, metastable or stable, states, that are separated by free-energy barriers and change role as the temperature is raised. In particular, for adenylate kinase we find three major partial unfolding states, which is consistent with single molecule FRET experiments [Pirchi et al., Nat. Commun. 2, 493 (2011), 10.1038/ncomms1504] for which hidden Markov analysis reveals between three and five such states. Such states can play a major role in enzymatic activity.

  2. Turbulent energy exchange: Calculation and relevance for profile prediction

    SciTech Connect

    Candy, J.

    2013-08-15

    The anomalous heat production due to turbulence is neither routinely calculated in nonlinear gyrokinetic simulations nor routinely retained in profile prediction studies. In this work, we develop a symmetrized method to compute the exchange which dramatically reduces the intermittency in the time-dependent moment, thereby improving the accuracy of the time-average. We also examine the practical impact on transport-timescale simulations, and show that the exchange has only a minor impact on profile evolution for a well-studied DIII-D discharge.

  3. Advancing QCD-based calculations of energy loss

    NASA Astrophysics Data System (ADS)

    Tywoniuk, Konrad

    2013-08-01

    We give a brief overview of the basics and current developments of QCD-based calculations of radiative processes in medium. We put an emphasis on the underlying physics concepts and discuss the theoretical uncertainties inherently associated with the fundamental parameters to be extracted from data. An important area of development is the study of the single-gluon emission in medium. Moreover, establishing the correct physical picture of multi-gluon emissions is imperative for comparison with data. We will report on progress made in both directions and discuss perspectives for the future.

  4. Potential Energy Calculations for Collinear Cluster Tripartition Fission Events

    NASA Astrophysics Data System (ADS)

    Unzhakova, A. V.; Pashkevich, V. V.; Pyatkov, Y. V.

    2014-09-01

    Strutinsky shell correction calculations were performed to describe the recent experimental results on collinear ternary fission. Collinear Cluster Tripartion fission events were studied experimentally in neutron induced fission of 235U, where the missing mass in the detected binary decay was suggested to characterize fission event as a collinear tripartition; and in spontaneous fission of 252Cf, where the direct detection of the three fission fragments has been used to confirm the existence of the Collinear Cluster Tripartition channel with a probability of 4.7×10-3 relative to the binary fission events.

  5. Optimization of Azoles as Anti-Human Immunodeficiency Virus Agents Guided by Free-Energy Calculations

    PubMed Central

    Zeevaart, Jacob G.; Wang, Ligong; Thakur, Vinay V.; Leung, Cheryl S.; Tirado-Rives, Julian; Bailey, Christopher M.; Domaoal, Robert A.; Anderson, Karen S.; Jorgensen, William L.

    2009-01-01

    Efficient optimization of an inactive 2-anilinyl-5-benzyloxadiazole core has been guided by free energy perturbation (FEP) calculations to provide potent non-nucleoside inhibitors of human immunodeficiency virus (HIV) reverse transcriptase (NNRTIs). An FEP “chlorine scan” was performed to identify the most promising sites for substitution of aryl hydrogens. This yielded NNRTIs 8 and 10 with activities (EC50) of 820 and 310 nM for protection of human T-cells from infection by wild-type HIV-1. FEP calculations for additional substituent modifications and change of the core heterocycle readily led to oxazoles 28 and 29, which were confirmed as highly potent anti-HIV agents with activities in the 10–20 nM range. The designed compounds were also monitored for possession of desirable pharmacological properties by use of additional computational tools. Overall, the trends predicted by the FEP calculations were well borne out by the assay results. FEP-guided lead optimization is confirmed as a valuable tool for molecular design including drug discovery; chlorine scans are particularly attractive since they are both straightforward to perform and highly informative. PMID:18588301

  6. Programmable electronic calculator in underground corrosion related activity. Part 4

    SciTech Connect

    Siefert, R.L.

    1980-09-01

    A new program for the Hewlett-Packard 97 and 67 portable calculators allows the field application of Pearson's network equations for analyzing the amount of interference caused by a pipeline's cathodic-protection rectifier on a neighboring pipeline or power cable. Reducing the analysis to a simple, fast operation, the program produces a complete description of the overall behavior of the interference problem and its solution. The corrosion engineer can establish a model of the particular interference condition by obtaining a few field measurements at the test site. The model may be altered and examined to determine the necessary mitigation measurements.

  7. Extra precision docking, free energy calculation and molecular dynamics simulation studies of CDK2 inhibitors.

    PubMed

    Tripathi, Sunil Kumar; Muttineni, Ravikumar; Singh, Sanjeev Kumar

    2013-10-01

    Molecular docking, free energy calculation and molecular dynamics (MD) simulation studies have been performed, to explore the putative binding modes of 3,5-diaminoindazoles, imidazo(1,2-b)pyridazines and triazolo(1,5-a) pyridazines series of Cyclin-dependent kinase (CDK2) inhibitors. To evaluate the effectiveness of docking protocol in flexible docking, we have selected crystallographic bound compound to validate our docking procedure as evident from root mean square deviations (RMSDs). We found different binding sites namely catalytic, inhibitory phosphorylation, cyclin binding and CKS-binding site of the CDK2 contributing towards the binding of these compounds. Moreover, correlation between free energy of binding and biological activity yielded a statistically significant correlation coefficient. Finally, three representative protein-ligand complexes were subjected to molecular dynamics simulation to determine the stability of the predicted conformations. The low value of the RMSDs between the initial complex structure and the energy minimized final average complex structure suggests that the derived docked complexes are close to equilibrium. We suggest that the phenylacetyl type of substituents and cyclohexyl moiety make the favorable interactions with a number of residues in the active site, and show better inhibitory activity to improve the pharmacokinetic profile of compounds against CDK2. The structure-based drug design strategy described in this study will be highly useful for the development of new inhibitors with high potency and selectivity.

  8. The Suppression of Energy Discretization Errors in Multigroup Transport Calculations

    SciTech Connect

    Larsen, Edward

    2013-06-17

    The Objective of this project is to develop, implement, and test new deterministric methods to solve, as efficiently as possible, multigroup neutron transport problems having an extremely large number of groups. Our approach was to (i) use the standard CMFD method to "coarsen" the space-angle grid, yielding a multigroup diffusion equation, and (ii) use a new multigrid-in-space-and-energy technique to efficiently solve the multigroup diffusion problem. The overall strategy of (i) how to coarsen the spatial an energy grids, and (ii) how to navigate through the various grids, has the goal of minimizing the overall computational effort. This approach yields not only the fine-grid solution, but also coarse-group flux-weighted cross sections that can be used for other related problems.

  9. Computational efficiences for calculating rare earth f^n energies

    NASA Astrophysics Data System (ADS)

    Beck, Donald R.

    2009-05-01

    RecentlyootnotetextD. R. Beck and E. J. Domeier, Can. J. Phys. Walter Johnson issue, Jan. 2009., we have used new computational strategies to obtain wavefunctions and energies for Gd IV 4f^7 and 4f^65d levels. Here we extend one of these techniques to allow efficent inclusion of 4f^2 pair correlation effects using radial pair energies obtained from much simpler calculationsootnotetexte.g. K. Jankowski et al., Int. J. Quant. Chem. XXVII, 665 (1985). and angular factors which can be simply computedootnotetextD. R. Beck and C. A. Nicolaides, Excited States in Quantum Chemistry, C. A. Nicolaides and D. R. Beck (editors), D. Reidel (1978), p. 105ff.. This is a re-vitalization of an older ideaootnotetextI. Oksuz and O. Sinanoglu, Phys. Rev. 181, 54 (1969).. We display relationships between angular factors involving the exchange of holes and electrons (e.g. f^6 vs f^8, f^13d vs fd^9). We apply the results to Tb IV and Gd IV, whose spectra is largely unknown, but which may play a role in MRI medicine as endohedral metallofullerenes (e.g. Gd3N-C80ootnotetextM. C. Qian and S. N. Khanna, J. Appl. Phys. 101, 09E105 (2007).). Pr III results are in good agreement (910 cm-1) with experiment. Pu I 5f^2 radial pair energies are also presented.

  10. Ab initio molecular dynamics calculations of ion hydration free energies

    SciTech Connect

    Leung, Kevin; Rempe, Susan B.; Lilienfeld, O. Anatole von

    2009-05-28

    We apply ab initio molecular dynamics (AIMD) methods in conjunction with the thermodynamic integration or '{lambda}-path' technique to compute the intrinsic hydration free energies of Li{sup +}, Cl{sup -}, and Ag{sup +} ions. Using the Perdew-Burke-Ernzerhof functional, adapting methods developed for classical force field applications, and with consistent assumptions about surface potential ({phi}) contributions, we obtain absolute AIMD hydration free energies ({Delta}G{sub hyd}) within a few kcal/mol, or better than 4%, of Tissandier et al.'s [J. Phys. Chem. A 102, 7787 (1998)] experimental values augmented with the SPC/E water model {phi} predictions. The sums of Li{sup +}/Cl{sup -} and Ag{sup +}/Cl{sup -} AIMD {Delta}G{sub hyd}, which are not affected by surface potentials, are within 2.6% and 1.2 % of experimental values, respectively. We also report the free energy changes associated with the transition metal ion redox reaction Ag{sup +}+Ni{sup +}{yields}Ag+Ni{sup 2+} in water. The predictions for this reaction suggest that existing estimates of {Delta}G{sub hyd} for unstable radiolysis intermediates such as Ni{sup +} may need to be extensively revised.

  11. Calculations of energy levels and lifetimes of low-lying states of barium and radium

    SciTech Connect

    Dzuba, V. A.; Ginges, J. S. M.

    2006-03-15

    We use the configuration-interaction method and many-body perturbation theory to perform accurate calculations of energy levels, transition amplitudes, and lifetimes of low-lying states of barium and radium. Calculations for radium are needed for the planning of measurements of parity- and time-invariance-violating effects which are strongly enhanced in this atom. Calculations for barium are used to control the accuracy of the calculations.

  12. Free-energy calculation methods for collective phenomena in membranes

    NASA Astrophysics Data System (ADS)

    Smirnova, Yuliya G.; Fuhrmans, Marc; Barragan Vidal, Israel A.; Müller, Marcus

    2015-09-01

    Collective phenomena in membranes are those which involve the co-operative reorganization of many molecules. Examples of these are membrane fusion, pore formation, bending, adhesion or fission. The time and length scales, on which these processes occur, pose a challenge for atomistic simulations. Therefore, in order to solve the length scale problem it is popular to introduce a coarse-grained representation. To facilitate sampling of the relevant states additional computational techniques, which encourage the system to explore the free-energy landscape far from equilibrium and visit transition states, are needed. These computational techniques provide insights about the free-energy changes involved in collective transformations of membranes, yielding information about the rate limiting states, the transformation mechanism and the influence of architectural, compositional and interaction parameters. A common approach is to identify an order parameter (or reaction coordinate), which characterizes the pathway of membrane reorganization. However, no general strategy exists to define such an order parameter that can properly describe cooperative reorganizations in membranes. Recently developed methods can overcome this problem of the order-parameter choice and allow us to study collective phenomena in membranes. We will discuss such methods as thermodynamic integration, umbrella sampling, and the string method and results provided by their applications to particle-based simulations, particularly focusing on membrane fusion and pore formation.

  13. Parallel implementation of electronic structure energy, gradient, and Hessian calculations.

    PubMed

    Lotrich, V; Flocke, N; Ponton, M; Yau, A D; Perera, A; Deumens, E; Bartlett, R J

    2008-05-21

    ACES III is a newly written program in which the computationally demanding components of the computational chemistry code ACES II [J. F. Stanton et al., Int. J. Quantum Chem. 526, 879 (1992); [ACES II program system, University of Florida, 1994] have been redesigned and implemented in parallel. The high-level algorithms include Hartree-Fock (HF) self-consistent field (SCF), second-order many-body perturbation theory [MBPT(2)] energy, gradient, and Hessian, and coupled cluster singles, doubles, and perturbative triples [CCSD(T)] energy and gradient. For SCF, MBPT(2), and CCSD(T), both restricted HF and unrestricted HF reference wave functions are available. For MBPT(2) gradients and Hessians, a restricted open-shell HF reference is also supported. The methods are programed in a special language designed for the parallelization project. The language is called super instruction assembly language (SIAL). The design uses an extreme form of object-oriented programing. All compute intensive operations, such as tensor contractions and diagonalizations, all communication operations, and all input-output operations are handled by a parallel program written in C and FORTRAN 77. This parallel program, called the super instruction processor (SIP), interprets and executes the SIAL program. By separating the algorithmic complexity (in SIAL) from the complexities of execution on computer hardware (in SIP), a software system is created that allows for very effective optimization and tuning on different hardware architectures with quite manageable effort. PMID:18500853

  14. Calculation of resonance energy transfer in crowded biological membranes.

    PubMed

    Zimet, D B; Thevenin, B J; Verkman, A S; Shohet, S B; Abney, J R

    1995-04-01

    Analytical and numerical models were developed to describe fluorescence resonance energy transfer (RET) in crowded biological membranes. It was assumed that fluorescent donors were linked to membrane proteins and that acceptors were linked to membrane lipids. No restrictions were placed on the location of the donor within the protein or the partitioning of acceptors between the two leaflets of the bilayer; however, acceptors were excluded from the area occupied by proteins. Analytical equations were derived that give the average quantum yield of a donor at low protein concentrations. Monte Carlo simulations were used to generate protein and lipid distributions that were linked numerically with RET equations to determine the average quantum yield and the distribution of donor fluorescence lifetimes at high protein concentrations, up to 50% area fraction. The Monte Carlo results show such crowding always reduces the quantum yield, probably because crowding increases acceptor concentrations near donor-bearing proteins; the magnitude of the reduction increases monotonically with protein concentration. The Monte Carlo results also show that the distribution of fluorescence lifetimes can differ markedly, even for systems possessing the same average lifetime. The dependence of energy transfer on acceptor concentration, protein radius, donor position within the protein, and the fraction of acceptors in each leaflet was also examined. The model and results are directly applicable to the analysis of RET data obtained from biological membranes; their application should result in a more complete and accurate determination of the structures of membrane components. PMID:7787045

  15. Parallel implementation of electronic structure energy, gradient, and Hessian calculations

    NASA Astrophysics Data System (ADS)

    Lotrich, V.; Flocke, N.; Ponton, M.; Yau, A. D.; Perera, A.; Deumens, E.; Bartlett, R. J.

    2008-05-01

    ACES III is a newly written program in which the computationally demanding components of the computational chemistry code ACES II [J. F. Stanton et al., Int. J. Quantum Chem. 526, 879 (1992); [ACES II program system, University of Florida, 1994] have been redesigned and implemented in parallel. The high-level algorithms include Hartree-Fock (HF) self-consistent field (SCF), second-order many-body perturbation theory [MBPT(2)] energy, gradient, and Hessian, and coupled cluster singles, doubles, and perturbative triples [CCSD(T)] energy and gradient. For SCF, MBPT(2), and CCSD(T), both restricted HF and unrestricted HF reference wave functions are available. For MBPT(2) gradients and Hessians, a restricted open-shell HF reference is also supported. The methods are programed in a special language designed for the parallelization project. The language is called super instruction assembly language (SIAL). The design uses an extreme form of object-oriented programing. All compute intensive operations, such as tensor contractions and diagonalizations, all communication operations, and all input-output operations are handled by a parallel program written in C and FORTRAN 77. This parallel program, called the super instruction processor (SIP), interprets and executes the SIAL program. By separating the algorithmic complexity (in SIAL) from the complexities of execution on computer hardware (in SIP), a software system is created that allows for very effective optimization and tuning on different hardware architectures with quite manageable effort.

  16. Analytical calculation of proton linear energy transfer in voxelized geometries including secondary protons.

    PubMed

    Sanchez-Parcerisa, D; Cortés-Giraldo, M A; Dolney, D; Kondrla, M; Fager, M; Carabe, A

    2016-02-21

    In order to integrate radiobiological modelling with clinical treatment planning for proton radiotherapy, we extended our in-house treatment planning system FoCa with a 3D analytical algorithm to calculate linear energy transfer (LET) in voxelized patient geometries. Both active scanning and passive scattering delivery modalities are supported. The analytical calculation is much faster than the Monte-Carlo (MC) method and it can be implemented in the inverse treatment planning optimization suite, allowing us to create LET-based objectives in inverse planning. The LET was calculated by combining a 1D analytical approach including a novel correction for secondary protons with pencil-beam type LET-kernels. Then, these LET kernels were inserted into the proton-convolution-superposition algorithm in FoCa. The analytical LET distributions were benchmarked against MC simulations carried out in Geant4. A cohort of simple phantom and patient plans representing a wide variety of sites (prostate, lung, brain, head and neck) was selected. The calculation algorithm was able to reproduce the MC LET to within 6% (1 standard deviation) for low-LET areas (under 1.7 keV μm(-1)) and within 22% for the high-LET areas above that threshold. The dose and LET distributions can be further extended, using radiobiological models, to include radiobiological effectiveness (RBE) calculations in the treatment planning system. This implementation also allows for radiobiological optimization of treatments by including RBE-weighted dose constraints in the inverse treatment planning process. PMID:26840945

  17. Free energies of binding from large-scale first-principles quantum mechanical calculations: application to ligand hydration energies.

    PubMed

    Fox, Stephen J; Pittock, Chris; Tautermann, Christofer S; Fox, Thomas; Christ, Clara; Malcolm, N O J; Essex, Jonathan W; Skylaris, Chris-Kriton

    2013-08-15

    Schemes of increasing sophistication for obtaining free energies of binding have been developed over the years, where configurational sampling is used to include the all-important entropic contributions to the free energies. However, the quality of the results will also depend on the accuracy with which the intermolecular interactions are computed at each molecular configuration. In this context, the energy change associated with the rearrangement of electrons (electronic polarization and charge transfer) upon binding is a very important effect. Classical molecular mechanics force fields do not take this effect into account explicitly, and polarizable force fields and semiempirical quantum or hybrid quantum-classical (QM/MM) calculations are increasingly employed (at higher computational cost) to compute intermolecular interactions in free-energy schemes. In this work, we investigate the use of large-scale quantum mechanical calculations from first-principles as a way of fully taking into account electronic effects in free-energy calculations. We employ a one-step free-energy perturbation (FEP) scheme from a molecular mechanical (MM) potential to a quantum mechanical (QM) potential as a correction to thermodynamic integration calculations within the MM potential. We use this approach to calculate relative free energies of hydration of small aromatic molecules. Our quantum calculations are performed on multiple configurations from classical molecular dynamics simulations. The quantum energy of each configuration is obtained from density functional theory calculations with a near-complete psinc basis set on over 600 atoms using the ONETEP program.

  18. Calculating Capstone Depleted Uranium Aerosol Concentrations from Beta Activity Measurements

    SciTech Connect

    Szrom, Fran; Falo, Gerald A.; Parkhurst, MaryAnn; Whicker, Jeffrey J.; Alberth, David P.

    2009-03-01

    Beta activity measurements were used as surrogate measurements of uranium mass in aerosol samples collected during the field testing phase of the Capstone Depleted Uranium (DU) Aerosol Study. These aerosol samples generated by the perforation of armored combat vehicles were used to characterize the depleted uranium (DU) source term for the subsequent human health risk assessment (HHRA) of Capstone aerosols. Establishing a calibration curve between beta activity measurements and uranium mass measurements is straightforward if the uranium isotopes are in equilibrium with their immediate short-lived, beta-emitting progeny. For DU samples collected during the Capstone study, it was determined that the equilibrium between the uranium isotopes and their immediate short lived, beta-emitting progeny had been disrupted when penetrators had perforated target vehicles. Adjustments were made to account for the disrupted equilibrium and for wall losses in the aerosol samplers. Correction factors for the disrupted equilibrium ranged from 0.16 to 1, and the wall loss correction factors ranged from 1 to 1.92.

  19. CONTINUOUS-ENERGY MONTE CARLO METHODS FOR CALCULATING GENERALIZED RESPONSE SENSITIVITIES USING TSUNAMI-3D

    SciTech Connect

    Perfetti, Christopher M; Rearden, Bradley T

    2014-01-01

    This work introduces a new approach for calculating sensitivity coefficients for generalized neutronic responses to nuclear data uncertainties using continuous-energy Monte Carlo methods. The approach presented in this paper, known as the GEAR-MC method, allows for the calculation of generalized sensitivity coefficients for multiple responses in a single Monte Carlo calculation with no nuclear data perturbations or knowledge of nuclear covariance data. The theory behind the GEAR-MC method is presented here, and proof of principle is demonstrated by using the GEAR-MC method to calculate sensitivity coefficients for responses in several 3D, continuous-energy Monte Carlo applications.

  20. Heart rate calculation from ensemble brain wave using wavelet and Teager-Kaiser energy operator.

    PubMed

    Srinivasan, Jayaraman; Adithya, V

    2015-01-01

    Electroencephalogram (EEG) signal artifacts are caused by various factors, such as, Electro-oculogram (EOG), Electromyogram (EMG), Electrocardiogram (ECG), movement artifact and line interference. The relatively high electrical energy cardiac activity causes EEG artifacts. In EEG signal processing the general approach is to remove the ECG signal. In this paper, we introduce an automated method to extract the ECG signal from EEG using wavelet and Teager-Kaiser energy operator for R-peak enhancement and detection. From the detected R-peaks the heart rate (HR) is calculated for clinical diagnosis. To check the efficiency of our method, we compare the HR calculated from ECG signal recorded in synchronous with EEG. The proposed method yields a mean error of 1.4% for the heart rate and 1.7% for mean R-R interval. The result illustrates that, proposed method can be used for ECG extraction from single channel EEG and used in clinical diagnosis like estimation for stress analysis, fatigue, and sleep stages classification studies as a multi-model system. In addition, this method eliminates the dependence of additional synchronous ECG in extraction of ECG from EEG signal process. PMID:26737640

  1. Heart rate calculation from ensemble brain wave using wavelet and Teager-Kaiser energy operator.

    PubMed

    Srinivasan, Jayaraman; Adithya, V

    2015-01-01

    Electroencephalogram (EEG) signal artifacts are caused by various factors, such as, Electro-oculogram (EOG), Electromyogram (EMG), Electrocardiogram (ECG), movement artifact and line interference. The relatively high electrical energy cardiac activity causes EEG artifacts. In EEG signal processing the general approach is to remove the ECG signal. In this paper, we introduce an automated method to extract the ECG signal from EEG using wavelet and Teager-Kaiser energy operator for R-peak enhancement and detection. From the detected R-peaks the heart rate (HR) is calculated for clinical diagnosis. To check the efficiency of our method, we compare the HR calculated from ECG signal recorded in synchronous with EEG. The proposed method yields a mean error of 1.4% for the heart rate and 1.7% for mean R-R interval. The result illustrates that, proposed method can be used for ECG extraction from single channel EEG and used in clinical diagnosis like estimation for stress analysis, fatigue, and sleep stages classification studies as a multi-model system. In addition, this method eliminates the dependence of additional synchronous ECG in extraction of ECG from EEG signal process.

  2. Energy Activities for the Primary Classroom. Revised.

    ERIC Educational Resources Information Center

    Tierney, Blue, Comp.

    An energy education program at the primary level should help students to understand the nature and importance of energy, consider different energy sources, learn about energy conservation, prepare for energy related careers, and become energy conscious in other career fields. The activities charts, readings, and experiments provided in this…

  3. Assessment and acceleration of binding energy calculations for protein-ligand complexes by the fragment molecular orbital method.

    PubMed

    Otsuka, Takao; Okimoto, Noriaki; Taiji, Makoto

    2015-11-15

    In the field of drug discovery, it is important to accurately predict the binding affinities between target proteins and drug applicant molecules. Many of the computational methods available for evaluating binding affinities have adopted molecular mechanics-based force fields, although they cannot fully describe protein-ligand interactions. A noteworthy computational method in development involves large-scale electronic structure calculations. Fragment molecular orbital (FMO) method, which is one of such large-scale calculation techniques, is applied in this study for calculating the binding energies between proteins and ligands. By testing the effects of specific FMO calculation conditions (including fragmentation size, basis sets, electron correlation, exchange-correlation functionals, and solvation effects) on the binding energies of the FK506-binding protein and 10 ligand complex molecule, we have found that the standard FMO calculation condition, FMO2-MP2/6-31G(d), is suitable for evaluating the protein-ligand interactions. The correlation coefficient between the binding energies calculated with this FMO calculation condition and experimental values is determined to be R = 0.77. Based on these results, we also propose a practical scheme for predicting binding affinities by combining the FMO method with the quantitative structure-activity relationship (QSAR) model. The results of this combined method can be directly compared with experimental binding affinities. The FMO and QSAR combined scheme shows a higher correlation with experimental data (R = 0.91). Furthermore, we propose an acceleration scheme for the binding energy calculations using a multilayer FMO method focusing on the protein-ligand interaction distance. Our acceleration scheme, which uses FMO2-HF/STO-3G:MP2/6-31G(d) at R(int) = 7.0 Å, reduces computational costs, while maintaining accuracy in the evaluation of binding energy.

  4. Solid-liquid phase equilibria from free-energy perturbation calculations

    NASA Astrophysics Data System (ADS)

    Angioletti-Uberti, Stefano; Asta, Mark; Finnis, Mike W.; Lee, P. D.

    2008-10-01

    A method for calculating free-energy differences based on a free-energy perturbation (FEP) formalism in an alloy system described by two different Hamiltonians is reported. The intended application is the calculation of solid-liquid phase equilibria in alloys with the accuracy of first-principles electronic density-functional theory (DFT). For this purpose free energies are derived with a classical interatomic potential, and FEP calculations are used to compute corrections to these reference values. For practical applications of this approach, due to the relatively high computational cost of DFT calculations, it is critical that the FEP calculations converge rapidly in terms of the number of samples used to estimate relevant ensemble averages. This issue is investigated in the current study employing two classical interatomic-potential models for Ni-Cu. These models yield differences in predicted phase-boundary temperatures of approximately 100 K, comparable to those that might be expected between a DFT Hamiltonian and a well-fit classical potential. We show that for pure elements the FEP calculations converge rapidly with the number of samples, yielding free-energy differences converged to within a fraction of a meV/atom in a few dozen energy calculations. For a concentrated equiatomic alloy similar precision requires roughly a hundred samples. The results suggest that the proposed methodology could provide a computationally tractable framework for calculating solid-liquid phase equilibria in concentrated alloys with DFT accuracy.

  5. A Python tool to set up relative free energy calculations in GROMACS.

    PubMed

    Klimovich, Pavel V; Mobley, David L

    2015-11-01

    Free energy calculations based on molecular dynamics (MD) simulations have seen a tremendous growth in the last decade. However, it is still difficult and tedious to set them up in an automated manner, as the majority of the present-day MD simulation packages lack that functionality. Relative free energy calculations are a particular challenge for several reasons, including the problem of finding a common substructure and mapping the transformation to be applied. Here we present a tool, alchemical-setup.py, that automatically generates all the input files needed to perform relative solvation and binding free energy calculations with the MD package GROMACS. When combined with Lead Optimization Mapper (LOMAP; Liu et al. in J Comput Aided Mol Des 27(9):755-770, 2013), recently developed in our group, alchemical-setup.py allows fully automated setup of relative free energy calculations in GROMACS. Taking a graph of the planned calculations and a mapping, both computed by LOMAP, our tool generates the topology and coordinate files needed to perform relative free energy calculations for a given set of molecules, and provides a set of simulation input parameters. The tool was validated by performing relative hydration free energy calculations for a handful of molecules from the SAMPL4 challenge (Mobley et al. in J Comput Aided Mol Des 28(4):135-150, 2014). Good agreement with previously published results and the straightforward way in which free energy calculations can be conducted make alchemical-setup.py a promising tool for automated setup of relative solvation and binding free energy calculations. PMID:26487189

  6. A Python tool to set up relative free energy calculations in GROMACS.

    PubMed

    Klimovich, Pavel V; Mobley, David L

    2015-11-01

    Free energy calculations based on molecular dynamics (MD) simulations have seen a tremendous growth in the last decade. However, it is still difficult and tedious to set them up in an automated manner, as the majority of the present-day MD simulation packages lack that functionality. Relative free energy calculations are a particular challenge for several reasons, including the problem of finding a common substructure and mapping the transformation to be applied. Here we present a tool, alchemical-setup.py, that automatically generates all the input files needed to perform relative solvation and binding free energy calculations with the MD package GROMACS. When combined with Lead Optimization Mapper (LOMAP; Liu et al. in J Comput Aided Mol Des 27(9):755-770, 2013), recently developed in our group, alchemical-setup.py allows fully automated setup of relative free energy calculations in GROMACS. Taking a graph of the planned calculations and a mapping, both computed by LOMAP, our tool generates the topology and coordinate files needed to perform relative free energy calculations for a given set of molecules, and provides a set of simulation input parameters. The tool was validated by performing relative hydration free energy calculations for a handful of molecules from the SAMPL4 challenge (Mobley et al. in J Comput Aided Mol Des 28(4):135-150, 2014). Good agreement with previously published results and the straightforward way in which free energy calculations can be conducted make alchemical-setup.py a promising tool for automated setup of relative solvation and binding free energy calculations.

  7. Quality Assessment of Predicted Protein Models Using Energies Calculated by the Fragment Molecular Orbital Method.

    PubMed

    Simoncini, David; Nakata, Hiroya; Ogata, Koji; Nakamura, Shinichiro; Zhang, Kam Yj

    2015-02-01

    Protein structure prediction directly from sequences is a very challenging problem in computational biology. One of the most successful approaches employs stochastic conformational sampling to search an empirically derived energy function landscape for the global energy minimum state. Due to the errors in the empirically derived energy function, the lowest energy conformation may not be the best model. We have evaluated the use of energy calculated by the fragment molecular orbital method (FMO energy) to assess the quality of predicted models and its ability to identify the best model among an ensemble of predicted models. The fragment molecular orbital method implemented in GAMESS was used to calculate the FMO energy of predicted models. When tested on eight protein targets, we found that the model ranking based on FMO energies is better than that based on empirically derived energies when there is sufficient diversity among these models. This model diversity can be estimated prior to the FMO energy calculations. Our result demonstrates that the FMO energy calculated by the fragment molecular orbital method is a practical and promising measure for the assessment of protein model quality and the selection of the best protein model among many generated.

  8. Calculations of the C2 fragmentation energies of higher fullerenes C80 and C82.

    PubMed

    Dolgonos, Grygoriy A; Peslherbe, Gilles H

    2007-09-01

    The C2 fragmentation energies of the most stable isolated-pentagon-rule (IPR) isomers of the C80 and C82 fullerenes were evaluated with second-order Møller-Plesset (MP2) theory, density-functional theory (DFT) and the semiempirical self-consistent charge density-functional tight-binding (SCC-DFTB) method. Zero-point energy, ionization energy and empirical C2 corrections were included in the calculation of fragmentation energies for comparison with experimental C2 fragmentation energies of the fullerene cations. In the case of the most probable Stone-Wales pathway of C2 fragmentation of C80, the calculated [Formula: see text] agree well with experimental data, whereas in the case of C(82) fragmentation, the calculated [Formula: see text] exceed by up to 1.2 eV the experimental ones, which suggests that other IPR isomers may be present in sufficient amounts in experimental samples. Computer-intensive MP2 calculations and DFT calculations with larger basis sets do not yield much improved C2 fragmentation energies, compared to those reported earlier with B3LYP/3-21G. On the other hand, semiempirical approaches such as SCC-DFTB, which are orders of magnitude less intensive, yield satisfactory fragmentation energies for higher fullerenes and may become a method of choice for routine calculations of fullerenes and carbon nanotubes.

  9. Separated topologies—A method for relative binding free energy calculations using orientational restraints

    NASA Astrophysics Data System (ADS)

    Rocklin, Gabriel J.; Mobley, David L.; Dill, Ken A.

    2013-02-01

    Orientational restraints can improve the efficiency of alchemical free energy calculations, but they are not typically applied in relative binding calculations, which compute the affinity difference been two ligands. Here, we describe a new "separated topologies" method, which computes relative binding free energies using orientational restraints and which has several advantages over existing methods. While standard approaches maintain the initial and final ligand in a shared orientation, the separated topologies approach allows the initial and final ligands to have distinct orientations. This avoids a slowly converging reorientation step in the calculation. The separated topologies approach can also be applied to determine the relative free energies of multiple orientations of the same ligand. We illustrate the approach by calculating the relative binding free energies of two compounds to an engineered site in Cytochrome C Peroxidase.

  10. Calculation of Electrochemical Reorganization Energies for Redox Molecules at Self-Assembled Monolayer Modified Electrodes.

    PubMed

    Ghosh, Soumya; Hammes-Schiffer, Sharon

    2015-01-01

    Electrochemical electron transfer reactions play an important role in energy conversion processes with many technological applications. Electrodes modified by self-assembled monolayers (SAMs) exhibit reduced double layer effects and are used in molecular electronics. An important quantity for calculating the electron transfer rate constant is the reorganization energy, which is associated with changes in the solute geometry and the environment. In this Letter, an approach for calculating the electrochemical reorganization energy for a redox molecule attached to or near a SAM modified electrode is presented. This integral equations formalism polarizable continuum model (IEF-PCM) approach accounts for the detailed electronic structure of the molecule, as well as the contributions from the electrode, SAM, and electronic and inertial solvent responses. The calculated total reorganization energies are in good agreement with experimental data for a series of metal complexes in aqueous solution. This approach will be useful for calculating electron transfer rate constants for molecular electrocatalysts. PMID:26263083

  11. Modified virtual orbitals for CI calculations of energy splitting in organic diradicals.

    PubMed

    Barone, Vincenzo; Cacelli, Ivo; Ferretti, Alessandro; Prampolini, Giacomo

    2009-05-28

    We have investigated the possible computational advantages of using modified virtual orbitals in CI calculations of singlet-triplet energy gaps in diradical systems, where the magnetic moieties are bridged by organic unsaturated fragments. The addition to the Fock operator of supplementary positive point charges onto the atoms sharing the unpaired electron in each of the two moieties provides a simple yet very effective recipe for the construction of modified virtual orbitals (MVOs) with significantly improved convergence to the limiting value of the singlet-triplet splitting. This is verified for all the systems investigated in the present study and paves the route towards the fully ab initio computation of magnetic couplings in large systems of current technological and/or biological relevance by supplementary/charge MVOs coupled to the localization and removal of orbitals centered far apart the active moieties, as proposed in a previous study.

  12. Wind Energy Finance (WEF): An Online Calculator for Economic Analysis of Wind Projects

    SciTech Connect

    Not Available

    2004-02-01

    This brochure provides an overview of Wind Energy Finance (WEF), a free online cost of energy calculator developed by the National Renewable Energy Laboratory that provides quick, detailed economic evaluation of potential utility-scale wind energy projects. The brochure lists the features of the tool, the inputs and outputs that a user can expect, visuals of the screens and a Cash Flow Results table, and contact information.

  13. Continuous Energy, Multi-Dimensional Transport Calculations for Problem Dependent Resonance Self-Shielding

    SciTech Connect

    T. Downar

    2009-03-31

    The overall objective of the work here has been to eliminate the approximations used in current resonance treatments by developing continuous energy multi-dimensional transport calculations for problem dependent self-shielding calculations. The work here builds on the existing resonance treatment capabilities in the ORNL SCALE code system.

  14. Quantum mechanical method of fragment's angular and energy distribution calculation for binary and ternary fission

    SciTech Connect

    Kadmensky, S. G. Titova, L. V.; Pen'kov, N. V.

    2006-08-15

    In the framework of quantum-mechanical fission theory, the method of calculation for partial fission width amplitudes and asymptotic behavior of the fissile nucleus wave function with strong channel coupling taken into account has been suggested. The method allows one to solve the calculation problem of angular and energy distribution countation for binary and ternary fission.

  15. METHODOLOGICAL NOTES: Energy density calculations for ball-lightning-like luminous silicon balls

    NASA Astrophysics Data System (ADS)

    Paiva, Gerson S.; Ferreira, Joacy V.; Bastos, Cristiano C.; dos Santos, Marcus V.; Pavão, Antonio C.

    2010-05-01

    The energy density of a luminous silicon ball [Phys. Rev. Lett. 98 048501 (2007)] is calculated for a model with a metal core surrounded by an atmosphere of silicon oxides. Experimental data combined with the molecular orbital calculations of the oxidation enthalpy lead to a mean energy density of 3.9 MJ m-3, which is within the range of estimates from other ball lightning models. This result provides good evidence to support the silicon-based model.

  16. Energy Storage. Teachers Guide. Science Activities in Energy.

    ERIC Educational Resources Information Center

    Jacobs, Mary Lynn, Ed.

    Included in this science activities energy package for students in grades 4-10 are 12 activities related to energy storage. Each activity is outlined on the front and back of a single sheet and is introduced by a key question. Most of the activities can be completed in the classroom with materials readily available in any community. Among the…

  17. Accuracy assessment and automation of free energy calculations for drug design.

    PubMed

    Christ, Clara D; Fox, Thomas

    2014-01-27

    As the free energy of binding of a ligand to its target is one of the crucial optimization parameters in drug design, its accurate prediction is highly desirable. In the present study we have assessed the average accuracy of free energy calculations for a total of 92 ligands binding to five different targets. To make this study and future larger scale applications possible we automated the setup procedure. Starting from user defined binding modes, the procedure decides which ligands to connect via a perturbation based on maximum common substructure criteria and produces all necessary parameter files for free energy calculations in AMBER 11. For the systems investigated, errors due to insufficient sampling were found to be substantial in some cases whereas differences in estimators (thermodynamic integration (TI) versus multistate Bennett acceptance ratio (MBAR)) were found to be negligible. Analytical uncertainty estimates calculated from a single free energy calculation were found to be much smaller than the sample standard deviation obtained from two independent free energy calculations. Agreement with experiment was found to be system dependent ranging from excellent to mediocre (RMSE = [0.9, 8.2, 4.7, 5.7, 8.7] kJ/mol). When restricting analyses to free energy calculations with sample standard deviations below 1 kJ/mol agreement with experiment improved (RMSE = [0.8, 6.9, 1.8, 3.9, 5.6] kJ/mol).

  18. Primer: The DOE Wind Energy Program's Approach to Calculating Cost of Energy: July 9, 2005 - July 8, 2006

    SciTech Connect

    George, K.; Schweizer, T.

    2008-01-01

    This report details the methodology used by DOE to calculate levelized cost of wind energy and demonstrates the variation in COE estimates due to different financing assumptions independent of wind generation technology.

  19. Nuclear data processing for energy release and deposition calculations in the MC21 Monte Carlo code

    SciTech Connect

    Trumbull, T. H.

    2013-07-01

    With the recent emphasis in performing multiphysics calculations using Monte Carlo transport codes such as MC21, the need for accurate estimates of the energy deposition-and the subsequent heating - has increased. However, the availability and quality of data necessary to enable accurate neutron and photon energy deposition calculations can be an issue. A comprehensive method for handling the nuclear data required for energy deposition calculations in MC21 has been developed using the NDEX nuclear data processing system and leveraging the capabilities of NJOY. The method provides a collection of data to the MC21 Monte Carlo code supporting the computation of a wide variety of energy release and deposition tallies while also allowing calculations with different levels of fidelity to be performed. Detailed discussions on the usage of the various components of the energy release data are provided to demonstrate novel methods in borrowing photon production data, correcting for negative energy release quantities, and adjusting Q values when necessary to preserve energy balance. Since energy deposition within a reactor is a result of both neutron and photon interactions with materials, a discussion on the photon energy deposition data processing is also provided. (authors)

  20. On the consequences of the energy imbalance for calculating surface conductance to water vapour.

    PubMed

    Wohlfahrt, Georg; Haslwanter, Alois; Hörtnagl, Lukas; Jasoni, Richard L; Fenstermaker, Lynn F; Arnone, John A; Hammerle, Albin

    2009-09-01

    The Penman-Monteith combination equation, which is most frequently used to derive the surface conductance to water vapour (Gs), implicitly assumes the energy balance to be closed. Any energy imbalance (positive or negative) will thus affect the calculated Gs. Using eddy covariance energy flux data from a temperate grassland and a desert shrub ecosystem we explored five possible approaches of closing the energy imbalance and show that calculated Gs may differ considerably between these five approaches depending on the relative magnitudes of sensible and latent heat fluxes, and the magnitude and sign of the energy imbalance. Based on our limited understanding of the nature of the energy imbalance, we tend to favour an approach which preserves the Bowen-ratio and closes the energy balance on a larger time scale.

  1. Development of a SCALE Tool for Continuous-Energy Eigenvalue Sensitivity Coefficient Calculations

    NASA Astrophysics Data System (ADS)

    Perfetti, Christopher M.; Rearden, Bradley T.

    2014-06-01

    Two methods for calculating eigenvalue sensitivity coefficients in continuous-energy Monte Carlo applications were implemented in the KENO code within the SCALE code package. The methods were used to calculate sensitivity coefficients for several criticality safety problems and produced sensitivity coefficients that agreed well with both reference sensitivities and multigroup TSUNAMI-3D sensitivity coefficients. The newly developed CLUTCH method was observed to produce sensitivity coefficients with high figures of merit and low memory requirements, and both continuous-energy sensitivity methods met or exceeded the accuracy of the multigroup TSUNAMI-3D calculations.

  2. Development of a SCALE Tool for Continuous-Energy Eigenvalue Sensitivity Coefficient Calculations

    SciTech Connect

    Perfetti, Christopher M; Rearden, Bradley T

    2013-01-01

    Two methods for calculating eigenvalue sensitivity coefficients in continuous-energy Monte Carlo applications were implemented in the KENO code within the SCALE code package. The methods were used to calculate sensitivity coefficients for several criticality safety problems and produced sensitivity coefficients that agreed well with both reference sensitivities and multigroup TSUNAMI-3D sensitivity coefficients. The newly developed CLUTCH method was observed to produce sensitivity coefficients with high figures of merit and low memory requirements, and both continuous-energy sensitivity methods met or exceeded the accuracy of the multigroup TSUNAMI-3D calculations.

  3. Continuous-energy eigenvalue sensitivity coefficient calculations in TSUNAMI-3D

    SciTech Connect

    Perfetti, C. M.; Rearden, B. T.

    2013-07-01

    Two methods for calculating eigenvalue sensitivity coefficients in continuous-energy Monte Carlo applications were implemented in the KENO code within the SCALE code package. The methods were used to calculate sensitivity coefficients for several test problems and produced sensitivity coefficients that agreed well with both reference sensitivities and multigroup TSUNAMI-3D sensitivity coefficients. The newly developed CLUTCH method was observed to produce sensitivity coefficients with high figures of merit and a low memory footprint, and both continuous-energy sensitivity methods met or exceeded the accuracy of the multigroup TSUNAMI-3D calculations. (authors)

  4. LCS/CINDER`90 accelerator tunnel activation calculations for the APT 1700-MeV accelerator tunnel

    SciTech Connect

    Court, J.D.; Snow, E.C.; Wilson, W.B.; Pitcher, E.R.

    1998-09-01

    Calculations have been done to determine the amount of activation in the linac components and tunnel air for the Accelerator Production of Tritium 1700-MeV superconducting linac. Proton transport is accomplished through the use of the LAHET Code System. Particle production and depletion from proton and high-energy neutron reactions, calculated in LAHET, as well as low-energy neutron fluxes calculated by MCNP, are passed to the radionuclide production code CINDER`90 to determine the source terms at various times after irradiation. The upper limit on total air activation based on conservative assumptions, for the entire tunnel air volume, was found to be 4.77 Ci after a nine-month irradiation. This is reduced to 0.09 Ci after a 10-hour cooling off period. The total activation for the full 1-km of beamline components was found to be less than 4 kCi, with the half-lives of the highest contributors ranging from 12 years to 2 minutes. This beamline component activation calculation was done for an irradiation time of 40 years, which is the anticipated lifetime of the superconducting linac.

  5. Introduction to Acoustical Energy. Learning Activity.

    ERIC Educational Resources Information Center

    Shackelford, Ray; Johnson, Steve

    1998-01-01

    This technology education activity will allow the students to observe acoustical energy and will put them in a problem-solving situation where they must use the movement of a sound-activated diaphragm to perform another activity. (Author)

  6. Gamma-point lattice free energy estimates from O1 force calculations.

    PubMed

    Voss, Johannes; Vegge, Tejs

    2008-05-14

    We present a new method for estimating the vibrational free energy of crystal (and molecular) structures employing only a single force calculation, for a particularly displaced configuration, in addition to the calculation of the ground state configuration. This displacement vector is the sum of the phonon eigenvectors obtained from a fast-relative to, e.g., density-functional theory (DFT)-Hessian calculation using interatomic potentials. These potentials are based here on effective charges obtained from a DFT calculation of the ground state electronic charge density but could also be based on other, e.g., empiric approaches.

  7. Quantum mechanical resonance calculations using an energy selected basis in hyperspherical coordinates

    NASA Astrophysics Data System (ADS)

    Montgomery, Jason

    2007-12-01

    Scattering resonances play a key role in many chemical processes, including unimolecular and bimolecular reactions and photodissociation. A significant theoretical emphasis over the past several decades has been placed on accurate resonance calculations for polyatomic systems. In spite of such efforts, a quantum treatment of molecular systems which exhibit a high density of states and strong coordinate coupling near dissociation remains a formidable task. The research described herein employs improved quantum mechanical methods to calculate a representation of nuclear motion, both bound and unbound, which is used subsequently to calculate accurate resonance energies and lifetimes for two triatomic systems: the neon trimer and ozone. Specifically, theory and results are given regarding the construction of an optimal, L2 eigenbasis using techniques such as the discrete variable representation, the energy selected basis (ESB) method, and iterative diagonalization methods. A new energy selection method is also developed and implemented for the neon trimer. Subsequent resonance calculations are described which make use of the artificial boundary inhomogeneity (ABI) method, adapted to work with the above mentioned ESB and hyperspherical coordinates. The ABI method is used to calculate a set of linearly independent wavefunctions (LIWs) at a given energy for the representation of the scattering wavefunction. Resonance parameters are obtained by imposing scattering boundary conditions on a linear combination of LIWs and solving for the S-matrix, S, its energy derivative, dS/dE, and the Smith lifetime matrix, Q. When available, comparisons are made with previously reported calculations.

  8. Sensitivity of methods for calculating energy expenditure by use of doubly labeled water.

    PubMed

    Seale, J; Miles, C; Bodwell, C E

    1989-02-01

    Attempts to estimate human energy expenditure by use of doubly labeled water have produced three methods currently used for calculating carbon dioxide production from isotope disappearance data: 1) the two-point method, 2) the regression method, and 3) the integration method. An ideal data set was used to determine the error produced in the calculated energy expenditure for each method when specific variables were perturbed. The analysis indicates that some of the calculation methods are more susceptible to perturbations in certain variables than others. Results from an experiment on one adult human subject are used to illustrate the potential for error in actual data. Samples of second void urine, 24-h urine, and breath collected every other day for 21 days are used to calculate the average daily energy expenditure by three calculation methods. The difference between calculated energy expenditure and metabolizable energy on a weight-maintenance diet is used to estimate the error associated with the doubly labeled water method. PMID:2496076

  9. Simple energy-calculation method for solar industrial-process-heat steam systems

    SciTech Connect

    Gee, R.

    1983-01-01

    Designing a solar industrial-process heat (IPH) system, sizing its components and predicting its annual energy delivery requires a method for calculating solar system performance. A calculation method that is accurate, easy to use, accounts for the impact of all important system parameters, and does not require use of a computer is described. Only simple graphs and a hand calculator are required to predict annual collector field performance and annual system losses. The energy-calculation method is applicable to a variety of solar-system configurations. The calculation method applied only to parabolic-trough steam-generation systems that do not employ thermal storage is described. Both flash tank and unfired-boiler steam systems are covered.

  10. Application of adjusted data in calculating fission-product decay energies and spectra

    NASA Astrophysics Data System (ADS)

    George, D. C.; Labauve, R. J.; England, T. R.

    1982-06-01

    The code ADENA, which approximately calculates fussion-product beta and gamma decay energies and spectra in 19 or fewer energy groups from a mixture of U235 and Pu239 fuels, is described. The calculation uses aggregate, adjusted data derived from a combination of several experiments and summation results based on the ENDF/B-V fission product file. The method used to obtain these adjusted data and the method used by ADENA to calculate fission-product decay energy with an absorption correction are described, and an estimate of the uncertainty of the ADENA results is given. Comparisons of this approximate method are made to experimental measurements, to the ANSI/ANS 5.1-1979 standard, and to other calculational methods. A listing of the complete computer code (ADENA) is contained in an appendix. Included in the listing are data statements containing the adjusted data in the form of parameters to be used in simple analytic functions.

  11. QED calculation of the ground-state energy of berylliumlike ions

    NASA Astrophysics Data System (ADS)

    Malyshev, A. V.; Volotka, A. V.; Glazov, D. A.; Tupitsyn, I. I.; Shabaev, V. M.; Plunien, G.

    2014-12-01

    Ab initio QED calculations of the ground-state binding energies of berylliumlike ions are performed for the wide range of the nuclear charge number: Z =18 -96 . The calculations are carried out in the framework of the extended Furry picture starting with three different types of the screening potential. The rigorous QED calculations up to the second order of the perturbation theory are combined with the third- and higher-order electron-correlation contributions obtained within the Breit approximation by the use of the large-scale configuration-interaction Dirac-Fock-Sturm method. The effects of nuclear recoil and nuclear polarization are taken into account. The ionization potentials are obtained by subtracting the binding energies of the corresponding lithiumlike ions. In comparison with the previous calculations the accuracy of the binding energies and the ionization potentials is significantly improved.

  12. Computational Chemistry Laboratory: Calculating the Energy Content of Food Applied to a Real-Life Problem

    ERIC Educational Resources Information Center

    Barbiric, Dora; Tribe, Lorena; Soriano, Rosario

    2015-01-01

    In this laboratory, students calculated the nutritional value of common foods to assess the energy content needed to answer an everyday life application; for example, how many kilometers can an average person run with the energy provided by 100 g (3.5 oz) of beef? The optimized geometries and the formation enthalpies of the nutritional components…

  13. CALCULATION OF ELECTRON AFFINITIES OF POLYCYCLIC AROMATIC HYDROCARBONS AND SOVATION ENERGIES OF THEIR ANIONS

    EPA Science Inventory

    Electron affinities (EAs) and free energies for electron attachment have been calculated for 42 polynuclear aromatic hydrocarbons and related molecules by a variety of theoretical models, including Koopmans' theorem methods and the L1E method from differences in energy between th...

  14. Meson self-energies calculated by the relativistic particle-hole-antiparticle representation

    SciTech Connect

    Nakano, M.; Noda, N.; Mitsumori, T.; Koide, K.; Kouno, H.; Hasegawa, A.; Liu, L.

    1997-12-01

    A new formulation of meson self-energies is introduced for {sigma},{omega},{pi},{rho},{delta}, and {eta} mesons on the basis of the particle-hole-antiparticle representation. We have studied the difference between the meson self-energy (MSE) of this representation and the MSE of the traditional density-Feynman (DF) representation. It is shown that the new formulation describes exactly the physical processes such as particle-hole excitations or particle-antiparticle excitations, and that, on the other hand, the meson self-energy based on the DF representation includes unphysical components. By numerical calculations, the meson self-energies describing the particle-hole excitations are shown to be close to each other for most of the meson self-energy in low momentum (R{lt}500 MeV) and low energy (R{sub 0}{lt}200 MeV). This fact implies that former calculations using the low momentum and low-energy part do not change greatly. The density part of the density-Feynman representation has been shown to have a resonant structure around the energy of particle-antiparticle excitation, which causes a large difference between the two representations in the meson spectrum calculations. Our investigation concludes that the former calculations based on the density-Feynman representation are not invalidated in many cases, but the particle-hole-antiparticle representation is more appropriate to treat exactly the physical processes. {copyright} {ital 1997} {ital The American Physical Society}

  15. CCSD(T)/CBS fragment-based calculations of lattice energy of molecular crystals

    NASA Astrophysics Data System (ADS)

    Červinka, Ctirad; Fulem, Michal; Růžička, Květoslav

    2016-02-01

    A comparative study of the lattice energy calculations for a data set of 25 molecular crystals is performed using an additive scheme based on the individual energies of up to four-body interactions calculated using the coupled clusters with iterative treatment of single and double excitations and perturbative triples correction (CCSD(T)) with an estimated complete basis set (CBS) description. The CCSD(T)/CBS values on lattice energies are used to estimate sublimation enthalpies which are compared with critically assessed and thermodynamically consistent experimental values. The average absolute percentage deviation of calculated sublimation enthalpies from experimental values amounts to 13% (corresponding to 4.8 kJ mol-1 on absolute scale) with unbiased distribution of positive to negative deviations. As pair interaction energies present a dominant contribution to the lattice energy and CCSD(T)/CBS calculations still remain computationally costly, benchmark calculations of pair interaction energies defined by crystal parameters involving 17 levels of theory, including recently developed methods with local and explicit treatment of electronic correlation, such as LCC and LCC-F12, are also presented. Locally and explicitly correlated methods are found to be computationally effective and reliable methods enabling the application of fragment-based methods for larger systems.

  16. CCSD(T)/CBS fragment-based calculations of lattice energy of molecular crystals.

    PubMed

    Červinka, Ctirad; Fulem, Michal; Růžička, Květoslav

    2016-02-14

    A comparative study of the lattice energy calculations for a data set of 25 molecular crystals is performed using an additive scheme based on the individual energies of up to four-body interactions calculated using the coupled clusters with iterative treatment of single and double excitations and perturbative triples correction (CCSD(T)) with an estimated complete basis set (CBS) description. The CCSD(T)/CBS values on lattice energies are used to estimate sublimation enthalpies which are compared with critically assessed and thermodynamically consistent experimental values. The average absolute percentage deviation of calculated sublimation enthalpies from experimental values amounts to 13% (corresponding to 4.8 kJ mol(-1) on absolute scale) with unbiased distribution of positive to negative deviations. As pair interaction energies present a dominant contribution to the lattice energy and CCSD(T)/CBS calculations still remain computationally costly, benchmark calculations of pair interaction energies defined by crystal parameters involving 17 levels of theory, including recently developed methods with local and explicit treatment of electronic correlation, such as LCC and LCC-F12, are also presented. Locally and explicitly correlated methods are found to be computationally effective and reliable methods enabling the application of fragment-based methods for larger systems. PMID:26874495

  17. Free Energy Minimization Calculation of Complex Chemical Equilibria. Reduction of Silicon Dioxide with Carbon at High Temperature.

    ERIC Educational Resources Information Center

    Wai, C. M.; Hutchinson, S. G.

    1989-01-01

    Discusses the calculation of free energy in reactions between silicon dioxide and carbon. Describes several computer programs for calculating the free energy minimization and their uses in chemistry classrooms. Lists 16 references. (YP)

  18. On the accuracy of density functional theory and wave function methods for calculating vertical ionization energies

    SciTech Connect

    McKechnie, Scott; Booth, George H.; Cohen, Aron J.; Cole, Jacqueline M.

    2015-05-21

    The best practice in computational methods for determining vertical ionization energies (VIEs) is assessed, via reference to experimentally determined VIEs that are corroborated by highly accurate coupled-cluster calculations. These reference values are used to benchmark the performance of density functional theory (DFT) and wave function methods: Hartree-Fock theory, second-order Møller-Plesset perturbation theory, and Electron Propagator Theory (EPT). The core test set consists of 147 small molecules. An extended set of six larger molecules, from benzene to hexacene, is also considered to investigate the dependence of the results on molecule size. The closest agreement with experiment is found for ionization energies obtained from total energy difference calculations. In particular, DFT calculations using exchange-correlation functionals with either a large amount of exact exchange or long-range correction perform best. The results from these functionals are also the least sensitive to an increase in molecule size. In general, ionization energies calculated directly from the orbital energies of the neutral species are less accurate and more sensitive to an increase in molecule size. For the single-calculation approach, the EPT calculations are in closest agreement for both sets of molecules. For the orbital energies from DFT functionals, only those with long-range correction give quantitative agreement with dramatic failing for all other functionals considered. The results offer a practical hierarchy of approximations for the calculation of vertical ionization energies. In addition, the experimental and computational reference values can be used as a standardized set of benchmarks, against which other approximate methods can be compared.

  19. On the accuracy of density functional theory and wave function methods for calculating vertical ionization energies.

    PubMed

    McKechnie, Scott; Booth, George H; Cohen, Aron J; Cole, Jacqueline M

    2015-05-21

    The best practice in computational methods for determining vertical ionization energies (VIEs) is assessed, via reference to experimentally determined VIEs that are corroborated by highly accurate coupled-cluster calculations. These reference values are used to benchmark the performance of density functional theory (DFT) and wave function methods: Hartree-Fock theory, second-order Møller-Plesset perturbation theory, and Electron Propagator Theory (EPT). The core test set consists of 147 small molecules. An extended set of six larger molecules, from benzene to hexacene, is also considered to investigate the dependence of the results on molecule size. The closest agreement with experiment is found for ionization energies obtained from total energy difference calculations. In particular, DFT calculations using exchange-correlation functionals with either a large amount of exact exchange or long-range correction perform best. The results from these functionals are also the least sensitive to an increase in molecule size. In general, ionization energies calculated directly from the orbital energies of the neutral species are less accurate and more sensitive to an increase in molecule size. For the single-calculation approach, the EPT calculations are in closest agreement for both sets of molecules. For the orbital energies from DFT functionals, only those with long-range correction give quantitative agreement with dramatic failing for all other functionals considered. The results offer a practical hierarchy of approximations for the calculation of vertical ionization energies. In addition, the experimental and computational reference values can be used as a standardized set of benchmarks, against which other approximate methods can be compared.

  20. Efficient Calculations of Dispersion Energies for Nanoscale Systems from Coupled Density Response Functions.

    PubMed

    Podeszwa, Rafał; Cencek, Wojciech; Szalewicz, Krzysztof

    2012-06-12

    Dispersion energies computed from coupled Kohn-Sham (CKS) dynamic density-density response functions are known to be highly accurate. At the same time, the computational algorithm is of only modest complexity compared to other accurate methods of dispersion energy calculation. We present a new implementation of this algorithm that removes several computational barriers present in current implementations and enables calculations of dispersion energies for systems with more than 200 atoms using more than 5000 basis functions. The improvements were mainly achieved by reorganizing the algorithm to minimize memory and disk usage. We present applications to two systems: the buckycatcher complex with fullerene and the vancomycin complex with a diacetyl-Lys-d-Ala-d-Ala bacterial wall precursor, both calculations performed with triple-ζ-quality basis sets. Our implementation makes it possible to use ab initio computed dispersion energies in popular "density functional theory plus dispersion" approaches.

  1. Surface Segregation Energies of BCC Binaries from Ab Initio and Quantum Approximate Calculations

    NASA Technical Reports Server (NTRS)

    Good, Brian S.

    2003-01-01

    We compare dilute-limit segregation energies for selected BCC transition metal binaries computed using ab initio and quantum approximate energy method. Ab initio calculations are carried out using the CASTEP plane-wave pseudopotential computer code, while quantum approximate results are computed using the Bozzolo-Ferrante-Smith (BFS) method with the most recent parameterization. Quantum approximate segregation energies are computed with and without atomistic relaxation. The ab initio calculations are performed without relaxation for the most part, but predicted relaxations from quantum approximate calculations are used in selected cases to compute approximate relaxed ab initio segregation energies. Results are discussed within the context of segregation models driven by strain and bond-breaking effects. We compare our results with other quantum approximate and ab initio theoretical work, and available experimental results.

  2. Analytic calculation of the energy-momentum tensor in heavy ion collisions from color glass condensate

    NASA Astrophysics Data System (ADS)

    Li, Ming; Kapusta, Joseph I.

    2016-08-01

    We generalize calculations of the energy-momentum tensor for classical gluon fields in the boost-invariant McLerran-Venugopalan model using the small-τ power series expansion method. Results to all orders for the energy density and pressures are given in the leading Q2 approximation and with the inclusion of estimated running coupling effects. The energy density and transverse pressure decrease monotonically with time while the longitudinal pressure starts from a negative value and increases towards zero.

  3. An improved fragment-based quantum mechanical method for calculation of electrostatic solvation energy of proteins.

    PubMed

    Jia, Xiangyu; Wang, Xianwei; Liu, Jinfeng; Zhang, John Z H; Mei, Ye; He, Xiao

    2013-12-01

    An efficient approach that combines the electrostatically embedded generalized molecular fractionation with conjugate caps (EE-GMFCC) method with conductor-like polarizable continuum model (CPCM), termed EE-GMFCC-CPCM, is developed for ab initio calculation of the electrostatic solvation energy of proteins. Compared with the previous MFCC-CPCM study [Y. Mei, C. G. Ji, and J. Z. H. Zhang, J. Chem. Phys. 125, 094906 (2006)], quantum mechanical (QM) calculation is applied to deal with short-range non-neighboring interactions replacing the classical treatment. Numerical studies are carried out for proteins up to 3837 atoms at the HF/6-31G* level. As compared to standard full system CPCM calculations, EE-GMFCC-CPCM shows clear improvement over the MFCC-CPCM method for both the total electrostatic solvation energy and its components (the polarized solute-solvent reaction field energy and wavefunction distortion energy of the solute). For large proteins with 1000-4000 atoms, where the standard full system ab initio CPCM calculations are not affordable, the EE-GMFCC-CPCM gives larger relative wavefunction distortion energies and weaker relative electrostatic solvation energies for proteins, as compared to the corresponding energies calculated by the Divide-and-Conquer Poisson-Boltzmann (D&C-PB) method. Notwithstanding, a high correlation between EE-GMFCC-CPCM and D&C-PB is observed. This study demonstrates that the linear-scaling EE-GMFCC-CPCM approach is an accurate and also efficient method for the calculation of electrostatic solvation energy of proteins.

  4. The Effect of Calculator-Based Ranger Activities on Students' Graphing Ability.

    ERIC Educational Resources Information Center

    Kwon, Oh Nam

    2002-01-01

    Addresses three issues of Calculator-based Ranger (CBR) activities on graphing abilities: (a) the effect of CBR activities on graphing abilities; (b) the extent to which prior knowledge about graphing skills affects graphing ability; and (c) the influence of instructional styles on students' graphing abilities. Indicates that CBR activities are…

  5. Calculation of Electrochemical Reorganization Energies for Redox Molecules at Self-Assembled Monolayer Modified Electrodes

    SciTech Connect

    Ghosh, Soumya; Hammes-Schiffer, Sharon

    2015-01-02

    Electrochemical electron transfer reactions play an important role in energy conversion processes with many technological applications. Electrodes modified by self-assembled monolayers (SAMs) are useful because the double layer effects are reduced. An important quantity for calculating the electron transfer rate constant is the reorganization energy, which is associated with changes in solute geometry and solvent configuration. In this Letter, an approach for calculating the electrochemical solvent reorganization energy for a redox molecule attached to or near a SAM modified electrode is presented. This integral equations formalism polarizable continuum model (IEF-PCM) approach accounts for the detailed electronic structure of the molecule, as well as the contributions from the electrode, SAM, and electronic and inertial solvent responses. The calculated total reorganization energies are in good agreement with experimental data for a series of metal complex in aqueous solution. This approach will be useful for calculating electron transfer rate constants for molecular electrocatalysts. This work was supported as part of the Center for Molecular Electrocatalysis, an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences.

  6. AlaScan: A Graphical User Interface for Alanine Scanning Free-Energy Calculations.

    PubMed

    Ramadoss, Vijayaraj; Dehez, François; Chipot, Christophe

    2016-06-27

    Computation of the free-energy changes that underlie molecular recognition and association has gained significant importance due to its considerable potential in drug discovery. The massive increase of computational power in recent years substantiates the application of more accurate theoretical methods for the calculation of binding free energies. The impact of such advances is the application of parent approaches, like computational alanine scanning, to investigate in silico the effect of amino-acid replacement in protein-ligand and protein-protein complexes, or probe the thermostability of individual proteins. Because human effort represents a significant cost that precludes the routine use of this form of free-energy calculations, minimizing manual intervention constitutes a stringent prerequisite for any such systematic computation. With this objective in mind, we propose a new plug-in, referred to as AlaScan, developed within the popular visualization program VMD to automate the major steps in alanine-scanning calculations, employing free-energy perturbation as implemented in the widely used molecular dynamics code NAMD. The AlaScan plug-in can be utilized upstream, to prepare input files for selected alanine mutations. It can also be utilized downstream to perform the analysis of different alanine-scanning calculations and to report the free-energy estimates in a user-friendly graphical user interface, allowing favorable mutations to be identified at a glance. The plug-in also assists the end-user in assessing the reliability of the calculation through rapid visual inspection.

  7. Energy Activities for the Classroom: Volume II.

    ERIC Educational Resources Information Center

    Coon, Herbert L.; Bowman, Mary Lynne

    This resource book contains descriptions of over 100 classroom activities designed to illustrate concepts relating to energy, its production, characteristics, use, and conservations. Each activity integrates the energy lesson into a concept that relates to one or more subject areas common to public school curricula. Many of the activities included…

  8. Energy and power limits for microbial activity

    NASA Astrophysics Data System (ADS)

    LaRowe, D.; Amend, J.

    2014-12-01

    The goal of this presentation is to describe a quantitative framework for determining how energy limits microbial activity, biomass and, ultimately, biogeochemical processes. Although this model can be applied to any environment, its utility is demonstrated in marine sediments, which are an attractive test habitat because they encompass a broad spectrum of energy levels, varying amounts of biomass and are ubiquitous. The potential number of active microbial cells in Arkonas Basin (Baltic Sea) sediments are estimated as a function of depth by quantifying the amount of energy that is available to them and the rate at which it is supplied: power. The amount of power supplied per cubic centimeter of sediment is determined by calculating the Gibbs energy of fermentation and sulfate reduction in combination with the rate of particulate organic carbon, POC, degradation. The Reactive Continuum Model (Boudreau and Ruddick, 1991), RCM, is used to determine the rate at which POC is made available for microbial consumption. The RCM represents POC as containing a range of different types of organic compounds whose ability to be consumed by microorganisms varies as a function of the age of the sediment and on the distribution of compound types that were initially deposited. The sediment age model and RCM parameters determined by (Mogollon et al., 2012) are used. The power available for fermentation and sulfate reduction coupled to H2 and acetate oxidation varies from 10-8 W cm-3 at the sediment water interface to between 10-11 - 10-12 W cm-3 at 3.5 meters below the seafloor, mbsf. Using values of maintenance powers for each of these catabolic activities taken from the literature, the total number of active cells in these sediments similarly decreases from just less than 108 cell cm-3 at the SWI to 4.6 x 104 cells cm-3 at 3.5 mbsf. The number of moles of POC decreases from 2.6 x 10-5 to 9.5 x 10-6, also becoming more recalcitrant with depth. Boudreau, B. P. and Ruddick, B. R

  9. Assessing the performance of popular QM methods for calculation of conformational energies of trialanine

    NASA Astrophysics Data System (ADS)

    Li, Yongxiu; Zhang, Saiqun; Zhang, John Z. H.; He, Xiao

    2016-05-01

    Accurate description of the conformational energies of the amino acids is essential for molecular dynamics simulation of protein structures. In this study, we compute the relative energies at 51 conformations for a trialanine tetrapeptide at different levels of theory. The computed energies at various theoretical levels, including the semiempirical DFTB method, HF, DFT, MP2 and CCSD(T), are compared with each other. The calculated energies from density-fitting local CCSD(T)/CBS (complete basis set) calculations are taken as the benchmark. The accuracy of the theoretical methods is highly dependent on the electronic correlation and dispersion corrections as well as the size of the basis sets. The involvement of the empirical dispersion energies in HF and DFT methods consistently improves their performance. Considering both the accuracy and computational efficiency, the Minnesota density functional M06-L-D and M06-2X-D are efficient and accurate for modeling of trialanine structures.

  10. Measurements and Monte Carlo calculations of photon energy distributions in MAYAK PA workplaces.

    PubMed

    Smetanin, M; Vasilenko, E; Semenov, M; Xanthos, S; Takoudis, G; Clouvas, A; Silva, J; Potiriadis, C

    2008-01-01

    Photon energy distributions were measured in different workplaces of the Mayak Production Association (MPA), which was the first plutonium production plant in the former Soviet Union. In situ gamma spectrometry measurements were performed with a portable germanium detector. The spectral stripping method is used for the conversion of the in situ gamma-ray spectra to photon fluence rate energy distribution. This method requires the simulation of the portable germanium detector, which has been performed based on the MCNP code of Los Alamos. Measured photon fluence rate energy distributions were compared with calculated photon energy distributions (with the MCNP code) in two different workplaces: in the first workplace the geometry exposure was known. On the contrary, in the second workplace, as in most workplaces of MPA, the exposure geometry was unknown. The results obtained from the comparison between the experimental and calculated photon fluence rate energy distributions are presented and discussed. PMID:18682405

  11. Calculation of the Local Free Energy Landscape in the Restricted Region by the Modified Tomographic Method.

    PubMed

    Chen, Changjun

    2016-03-31

    The free energy landscape is the most important information in the study of the reaction mechanisms of the molecules. However, it is difficult to calculate. In a large collective variable space, a molecule must take a long time to obtain the sufficient sampling during the simulation. To save the calculation quantity, decreasing the sampling region and constructing the local free energy landscape is required in practice. However, the restricted region in the collective variable space may have an irregular shape. Simply restricting one or more collective variables of the molecule cannot satisfy the requirement. In this paper, we propose a modified tomographic method to perform the simulation. First, it divides the restricted region by some hyperplanes and connects the centers of hyperplanes together by a curve. Second, it forces the molecule to sample on the curve and the hyperplanes in the simulation and calculates the free energy data on them. Finally, all the free energy data are combined together to form the local free energy landscape. Without consideration of the area outside the restricted region, this free energy calculation can be more efficient. By this method, one can further optimize the path quickly in the collective variable space.

  12. The frozen orbital approximation for calculating ionization energies with application to propane

    NASA Astrophysics Data System (ADS)

    Müller, Wolfgang; Nager, Christoph; Rosmus, Pavel

    1980-09-01

    In the frozen orbital approximation (FOA), the influence of reorganization on correlation contributions to ionization energies is neglected. It is particularly useful in calculations for large molecules because of the advantage that only one integral transformation is required for the calculation of all ionic states. In connection with the concept of independent orbital correlation contributions, the dimensions of the CI matrices can be drastically reduced. The method is applied to the calculation of the valence ionization energies of propane, and compared to more rigorous ab initio results and a recent calculation in which inner valence shell contributions to electron correlation are neglected. The ordering of the first three ionizations in the photoelectron spectrum of propane, which has not been definitively assigned, is shown to be 2B1(2b1),2A1(6a1) and 2B2(4b2), in agreement with Koopmans' theorem.

  13. Calculation of intensity of high energy muon groups observed deep underground

    NASA Technical Reports Server (NTRS)

    Vavilov, Y. N.; Dedenko, L. G.

    1985-01-01

    The intensity of narrow muon groups observed in Kolar Gold Field (KGF) at the depth of 3375 m.w.e. was calculated in terms of quark-gluon strings model for high energy hadron - air nuclei interactions by the method of direct modeling of nuclear cascade in the air and muon propagation in the ground for normal primary cosmic ray composition. The calculated intensity has been found to be approx. 10 to the 4 times less than one observed experimentally.

  14. Development of Continuous-Energy Eigenvalue Sensitivity Coefficient Calculation Methods in the Shift Monte Carlo Code

    SciTech Connect

    Perfetti, Christopher M; Martin, William R; Rearden, Bradley T; Williams, Mark L

    2012-01-01

    Three methods for calculating continuous-energy eigenvalue sensitivity coefficients were developed and implemented into the SHIFT Monte Carlo code within the Scale code package. The methods were used for several simple test problems and were evaluated in terms of speed, accuracy, efficiency, and memory requirements. A promising new method for calculating eigenvalue sensitivity coefficients, known as the CLUTCH method, was developed and produced accurate sensitivity coefficients with figures of merit that were several orders of magnitude larger than those from existing methods.

  15. New method for calculating binding energies in quantum mechanics and quantum field theories

    SciTech Connect

    Gat, G.; Rosenstein, B. Institute of Physics, Academia Sinica, Taipei, 11529 )

    1993-01-04

    We propose a systematic perturbative method for calculating the binding energy of threshold bound states---states which exist for arbitrary small coupling. The starting point is a (regularized) free theory. Explicit calculations are performed for quantum mechanics with arbitrary short-range potential in 1D and various (1+1)-dimensional quantum field theories. We check the method by comparing the results with exact formulas available in solvable models.

  16. Extending fragment-based free energy calculations with library Monte Carlo simulation: annealing in interaction space.

    PubMed

    Lettieri, Steven; Mamonov, Artem B; Zuckerman, Daniel M

    2011-04-30

    Pre-calculated libraries of molecular fragment configurations have previously been used as a basis for both equilibrium sampling (via library-based Monte Carlo) and for obtaining absolute free energies using a polymer-growth formalism. Here, we combine the two approaches to extend the size of systems for which free energies can be calculated. We study a series of all-atom poly-alanine systems in a simple dielectric solvent and find that precise free energies can be obtained rapidly. For instance, for 12 residues, less than an hour of single-processor time is required. The combined approach is formally equivalent to the annealed importance sampling algorithm; instead of annealing by decreasing temperature, however, interactions among fragments are gradually added as the molecule is grown. We discuss implications for future binding affinity calculations in which a ligand is grown into a binding site.

  17. Calculation of neutron and gamma ray energy spectra for fusion reactor shield design: comparison with experiment

    SciTech Connect

    Santoro, R.T.; Alsmiller, R.G. Jr.; Barnes, J.M.; Chapman, G.T.

    1980-08-01

    Integral experiments that measure the transport of approx. 14 MeV D-T neutrons through laminated slabs of proposed fusion reactor shield materials have been carried out. Measured and calculated neutron and gamma ray energy spectra are compared as a function of the thickness and composition of stainless steel type 304, borated polyethylene, and Hevimet (a tungsten alloy), and as a function of detector position behind these materials. The measured data were obtained using a NE-213 liquid scintillator using pulse-shape discrimination methods to resolve neutron and gamma ray pulse height data and spectral unfolding methods to convert these data to energy spectra. The calculated data were obtained using two-dimensional discrete ordinates radiation transport methods in a complex calculational network that takes into account the energy-angle dependence of the D-T neutrons and the nonphysical anomalies of the S/sub n/ method.

  18. Monte Carlo calculations of high energy nucleon meson cascades and applications to galactic cosmic ray transport

    NASA Technical Reports Server (NTRS)

    Armstrong, T. W.; Alsmiller, R. G., Jr.; Chandler, K. C.

    1972-01-01

    Results obtained using a recently developed calculational method for determining the nucleon-meson cascade induced in thick materials by high-energy nucleons and charged pions are presented. The calculational method uses the intranuclear-cascade-evaporation model to treat nonelastic collisions by particles with energies approximately or smaller than GeV and an extrapolation model at higher energies. The following configurations are considered: (1) 19.2-GeV/c protons incident on iron; (2) 30.3-GeV/c protons incident on iron; (3) solar and galactic protons incident on the moon, and (4) galactic protons incident on tissue. For the first three configurations, experimental results are available and comparisons between the experimental and calculated results are given.

  19. Ab initio calculations on collisions of low energy electrons with polyatomic molecules

    SciTech Connect

    Rescigno, T.N.

    1991-08-01

    The Kohn variational method is one of simplest, and oldest, techniques for performing scattering calculations. Nevertheless, a number of formal problems, as well as practical difficulties associated with the computation of certain required matrix elements, delayed its application to electron--molecule scattering problems for many years. This paper will describe the recent theoretical and computational developments that have made the complex'' Kohn variational method a practical tool for carrying out calculations of low energy electron--molecule scattering. Recent calculations on a number of target molecules will also be summarized. 41 refs., 7 figs.

  20. Monte Carlo calculations of energy deposition distributions of electrons below 20 keV in protein.

    PubMed

    Tan, Zhenyu; Liu, Wei

    2014-05-01

    The distributions of energy depositions of electrons in semi-infinite bulk protein and the radial dose distributions of point-isotropic mono-energetic electron sources [i.e., the so-called dose point kernel (DPK)] in protein have been systematically calculated in the energy range below 20 keV, based on Monte Carlo methods. The ranges of electrons have been evaluated by extrapolating two calculated distributions, respectively, and the evaluated ranges of electrons are compared with the electron mean path length in protein which has been calculated by using electron inelastic cross sections described in this work in the continuous-slowing-down approximation. It has been found that for a given energy, the electron mean path length is smaller than the electron range evaluated from DPK, but it is large compared to the electron range obtained from the energy deposition distributions of electrons in semi-infinite bulk protein. The energy dependences of the extrapolated electron ranges based on the two investigated distributions are given, respectively, in a power-law form. In addition, the DPK in protein has also been compared with that in liquid water. An evident difference between the two DPKs is observed. The calculations presented in this work may be useful in studies of radiation effects on proteins.

  1. Using Density Functional Theory (DFT) for the Calculation of Atomization Energies

    NASA Technical Reports Server (NTRS)

    Bauschlicher, Charles W., Jr.; Partridge, Harry; Langhoff, Stephen R. (Technical Monitor)

    1995-01-01

    The calculation of atomization energies using density functional theory (DFT), using the B3LYP hybrid functional, is reported. The sensitivity of the atomization energy to basis set is studied and compared with the coupled cluster singles and doubles approach with a perturbational estimate of the triples (CCSD(T)). Merging the B3LYP results with the G2(MP2) approach is also considered. It is found that replacing the geometry optimization and calculation of the zero-point energy by the analogous quantities computed using the B3LYP approach reduces the maximum error in the G2(MP2) approach. In addition to the 55 G2 atomization energies, some results for transition metal containing systems will also be presented.

  2. Hot-electron-mediated desorption rates calculated from excited-state potential energy surfaces

    NASA Astrophysics Data System (ADS)

    Olsen, Thomas; Gavnholt, Jeppe; Schiøtz, Jakob

    2009-01-01

    We present a model for desorption induced by (multiple) electronic transitions [DIET (DIMET)] based on potential energy surfaces calculated with the delta self-consistent field extension of density-functional theory. We calculate potential energy surfaces of CO and NO molecules adsorbed on various transition-metal surfaces and show that classical nuclear dynamics does not suffice for propagation in the excited state. We present a simple Hamiltonian describing the system with parameters obtained from the excited-state potential energy surface and show that this model can describe desorption dynamics in both the DIET and DIMET regimes and reproduce the power-law behavior observed experimentally. We observe that the internal stretch degree of freedom in the molecules is crucial for the energy transfer between the hot electrons and the molecule when the coupling to the surface is strong.

  3. The fast neutron fluence and the activation detector activity calculations using the effective source method and the adjoint function

    SciTech Connect

    Hep, J.; Konecna, A.; Krysl, V.; Smutny, V.

    2011-07-01

    This paper describes the application of effective source in forward calculations and the adjoint method to the solution of fast neutron fluence and activation detector activities in the reactor pressure vessel (RPV) and RPV cavity of a VVER-440 reactor. Its objective is the demonstration of both methods on a practical task. The effective source method applies the Boltzmann transport operator to time integrated source data in order to obtain neutron fluence and detector activities. By weighting the source data by time dependent decay of the detector activity, the result of the calculation is the detector activity. Alternatively, if the weighting is uniform with respect to time, the result is the fluence. The approach works because of the inherent linearity of radiation transport in non-multiplying time-invariant media. Integrated in this way, the source data are referred to as the effective source. The effective source in the forward calculations method thereby enables the analyst to replace numerous intensive transport calculations with a single transport calculation in which the time dependence and magnitude of the source are correctly represented. In this work, the effective source method has been expanded slightly in the following way: neutron source data were performed with few group method calculation using the active core calculation code MOBY-DICK. The follow-up neutron transport calculation was performed using the neutron transport code TORT to perform multigroup calculations. For comparison, an alternative method of calculation has been used based upon adjoint functions of the Boltzmann transport equation. Calculation of the three-dimensional (3-D) adjoint function for each required computational outcome has been obtained using the deterministic code TORT and the cross section library BGL440. Adjoint functions appropriate to the required fast neutron flux density and neutron reaction rates have been calculated for several significant points within the RPV

  4. Accurate calculation of conformational free energy differences in explicit water: the confinement-solvation free energy approach.

    PubMed

    Esque, Jeremy; Cecchini, Marco

    2015-04-23

    The calculation of the free energy of conformation is key to understanding the function of biomolecules and has attracted significant interest in recent years. Here, we present an improvement of the confinement method that was designed for use in the context of explicit solvent MD simulations. The development involves an additional step in which the solvation free energy of the harmonically restrained conformers is accurately determined by multistage free energy perturbation simulations. As a test-case application, the newly introduced confinement/solvation free energy (CSF) approach was used to compute differences in free energy between conformers of the alanine dipeptide in explicit water. The results are in excellent agreement with reference calculations based on both converged molecular dynamics and umbrella sampling. To illustrate the general applicability of the method, conformational equilibria of met-enkephalin (5 aa) and deca-alanine (10 aa) in solution were also analyzed. In both cases, smoothly converged free-energy results were obtained in agreement with equilibrium sampling or literature calculations. These results demonstrate that the CSF method may provide conformational free-energy differences of biomolecules with small statistical errors (below 0.5 kcal/mol) and at a moderate computational cost even with a full representation of the solvent.

  5. Solar Energy Education. Renewable energy activities for biology

    SciTech Connect

    Not Available

    1982-01-01

    An instructional aid for teachers is presented that will allow biology students the opportunity to learn about renewable energy sources. Some of the school activities include using leaves as collectors of solar energy, solar energy stored in wood, and a fuel value test for green and dry woods. A study of organic wastes as a source of fuel is included. (BCS)

  6. Solar energy education. Renewable energy activities for general science

    SciTech Connect

    Not Available

    1985-01-01

    Renewable energy topics are integrated with the study of general science. The literature is provided in the form of a teaching manual and includes such topics as passive solar homes, siting a home for solar energy, and wind power for the home. Other energy topics are explored through library research activities. (BCS)

  7. Absolute Binding Free Energy Calculations Using Molecular Dynamics Simulations with Restraining Potentials

    PubMed Central

    Wang, Jiyao; Deng, Yuqing; Roux, Benoît

    2006-01-01

    The absolute (standard) binding free energy of eight FK506-related ligands to FKBP12 is calculated using free energy perturbation molecular dynamics (FEP/MD) simulations with explicit solvent. A number of features are implemented to improve the accuracy and enhance the convergence of the calculations. First, the absolute binding free energy is decomposed into sequential steps during which the ligand-surrounding interactions as well as various biasing potentials restraining the translation, orientation, and conformation of the ligand are turned “on” and “off.” Second, sampling of the ligand conformation is enforced by a restraining potential based on the root mean-square deviation relative to the bound state conformation. The effect of all the restraining potentials is rigorously unbiased, and it is shown explicitly that the final results are independent of all artificial restraints. Third, the repulsive and dispersive free energy contribution arising from the Lennard-Jones interactions of the ligand with its surrounding (protein and solvent) is calculated using the Weeks-Chandler-Andersen separation. This separation also improves convergence of the FEP/MD calculations. Fourth, to decrease the computational cost, only a small number of atoms in the vicinity of the binding site are simulated explicitly, while all the influence of the remaining atoms is incorporated implicitly using the generalized solvent boundary potential (GSBP) method. With GSBP, the size of the simulated FKBP12/ligand systems is significantly reduced, from ∼25,000 to 2500. The computations are very efficient and the statistical error is small (∼1 kcal/mol). The calculated binding free energies are generally in good agreement with available experimental data and previous calculations (within ∼2 kcal/mol). The present results indicate that a strategy based on FEP/MD simulations of a reduced GSBP atomic model sampled with conformational, translational, and orientational restraining

  8. Validation and Benchmarking of a Practical Free Magnetic Energy and Relative Magnetic Helicity Budget Calculation in Solar Magnetic Structures

    NASA Astrophysics Data System (ADS)

    Moraitis, K.; Tziotziou, K.; Georgoulis, M. K.; Archontis, V.

    2014-12-01

    In earlier works we introduced and tested a nonlinear force-free (NLFF) method designed to self-consistently calculate the coronal free magnetic energy and the relative magnetic helicity budgets of observed solar magnetic structures. In principle, the method requires only a single, photospheric or low-chromospheric, vector magnetogram of a quiet-Sun patch or an active region and performs calculations without three-dimensional magnetic and velocity-field information. In this work we strictly validate this method using three-dimensional coronal magnetic fields. Benchmarking employs both synthetic, three-dimensional magnetohydrodynamic simulations and nonlinear force-free field extrapolations of the active-region solar corona. Our time-efficient NLFF method provides budgets that differ from those of more demanding semi-analytical methods by a factor of approximately three, at most. This difference is expected to come from the physical concept and the construction of the method. Temporal correlations show more discrepancies that are, however, soundly improved for more complex, massive active regions, reaching correlation coefficients on the order of, or exceeding, 0.9. In conclusion, we argue that our NLFF method can be reliably used for a routine and fast calculation of the free magnetic energy and relative magnetic helicity budgets in targeted parts of the solar magnetized corona. As explained in this article and in previous works, this is an asset that can lead to valuable insight into the physics and triggering of solar eruptions.

  9. Methods of Calculating Ionization Energies of Multielectron (Five or More) Isoelectronic Atomic Ions

    PubMed Central

    Lang, Peter F.; Smith, Barry C.

    2013-01-01

    We have previously used simple empirical equations to reproduce the literature values of the ionization energies of isoelectronic sequences of up to four electrons which gave very good agreement. We reproduce here a kinetic energy expression with corrections for relativity and Lamb shift effects which give excellent agreement with the literature values. These equations become more complex as the number of electrons in the system increases. Alternative simple quadratic expressions for calculating ionization energies of multielectron ions are discussed. A set of coefficients when substituted into a simple expression produces very good agreement with the literature values. Our work shows that Slater's rules are not appropriate for predicting trends or screening constants. This work provides very strong evidence that ionization energies are not functions of complete squares, and when calculating ionization energies electron transition/relaxation has to be taken into account. We demonstrate clearly that for particular isoelectronic sequences, the ionizing electrons may occupy different orbitals and in such cases more than one set of constants are needed to calculate the ionization energies. PMID:23766674

  10. Radioactivity of Potassium Solutions: A Comparison of Calculated Activity to Measured Activity from Gross Beta Counting and Gamma Spectroscopy

    SciTech Connect

    Gaylord, R F

    2005-07-26

    In order to determine if the measured beta activity for a solution containing potassium was exactly as predicted, particularly since the CES gas counter is not calibrated specifically with K-40, an experiment was conducted to compare measured activities from two radioanalytical methods (gamma spectroscopy and gas proportional counting) to calculated activities across a range of potassium concentrations. Potassium, being ubiquitous and naturally radioactive, is a well-known and common interference in gross beta counting methods. By measuring the observed beta activity due to K-40 in potassium-containing solutions across a wide range of concentrations, it was found that the observed beta activity agrees well with the beta activity calculated from the potassium concentration measured by standard inorganic analytical techniques, such as ICP-OES, and that using the measured potassium concentration to calculate the expected beta activity, and comparing this to the observed beta activity to determine if potassium can account for all the observed activity in a sample, is a valid technique. It was also observed that gamma spectroscopy is not an effective means of measuring K-40 activity below approximately 700 pCi/L, which corresponds to a solution with approximately 833 mg/L total potassium. Gas proportional counting for gross beta activity has a much lower detection limit, typically 20-50 picoCi/L for a liquid low in total dissolved solids, which corresponds to a potassium concentration of approximately 30-70 ppm K.

  11. Comparison of Measured Dark Current Distributions with Calculated Damage Energy Distributions in HgCdTe

    NASA Technical Reports Server (NTRS)

    Marshall, C. J.; Marshall, P. W.; Howe, C. L.; Reed, R. A.; Weller, R. A.; Mendenhall, M.; Waczynski, A.; Ladbury, R.; Jordan, T. M.

    2007-01-01

    This paper presents a combined Monte Carlo and analytic approach to the calculation of the pixel-to-pixel distribution of proton-induced damage in a HgCdTe sensor array and compares the results to measured dark current distributions after damage by 63 MeV protons. The moments of the Coulombic, nuclear elastic and nuclear inelastic damage distributions were extracted from Monte Carlo simulations and combined to form a damage distribution using the analytic techniques first described in [1]. The calculations show that the high energy recoils from the nuclear inelastic reactions (calculated using the Monte Carlo code MCNPX [2]) produce a pronounced skewing of the damage energy distribution. While the nuclear elastic component (also calculated using the MCNPX) contributes only a small fraction of the total nonionizing damage energy, its inclusion in the shape of the damage across the array is significant. The Coulombic contribution was calculated using MRED [3-5], a Geant4 [4,6] application. The comparison with the dark current distribution strongly suggests that mechanisms which are not linearly correlated with nonionizing damage produced according to collision kinematics are responsible for the observed dark current increases. This has important implications for the process of predicting the on-orbit dark current response of the HgCdTe sensor array.

  12. Efficient calculation of relative binding free energies by umbrella sampling perturbation.

    PubMed

    Zeller, Fabian; Zacharias, Martin

    2014-12-01

    An important task of biomolecular simulation is the calculation of relative binding free energies upon chemical modification of partner molecules in a biomolecular complex. The potential of mean force (PMF) along a reaction coordinate for association or dissociation of the complex can be used to estimate binding affinities. A free energy perturbation approach, termed umbrella sampling (US) perturbation, has been designed that allows an efficient calculation of the change of the PMF upon modification of a binding partner based on the trajectories obtained for the wild type reference complex. The approach was tested on the interaction of modified water molecules in aqueous solution and applied to in silico alanine scanning of a peptide-protein complex. For the water interaction test case, excellent agreement with an explicit PMF calculation for each modification was obtained as long as no long range electrostatic perturbations were considered. For the alanine scanning, the experimentally determined ranking and binding affinity changes upon alanine substitutions could be reproduced within 0.1-2.0 kcal/mol. In addition, good agreement with explicitly calculated PMFs was obtained mostly within the sampling uncertainty. The combined US and perturbation approach yields, under the condition of sufficiently small system modifications, rigorously derived changes in free energy and is applicable to any PMF calculation.

  13. EnergyPlus Analysis Capabilities for Use in California Building Energy Efficiency Standards Development and Compliance Calculations

    SciTech Connect

    Hong, Tianzhen; Buhl, Fred; Haves, Philip

    2008-03-28

    California has been using DOE-2 as the main building energy analysis tool in the development of building energy efficiency standards (Title 24) and the code compliance calculations. However, DOE-2.1E is a mature program that is no longer supported by LBNL on contract to the USDOE, or by any other public or private entity. With no more significant updates in the modeling capabilities of DOE-2.1E during recent years, DOE-2.1E lacks the ability to model, with the necessary accuracy, a number of building technologies that have the potential to reduce significantly the energy consumption of buildings in California. DOE-2's legacy software code makes it difficult and time consuming to add new or enhance existing modeling features in DOE-2. Therefore the USDOE proposed to develop a new tool, EnergyPlus, which is intended to replace DOE-2 as the next generation building simulation tool. EnergyPlus inherited most of the useful features from DOE-2 and BLAST, and more significantly added new modeling capabilities far beyond DOE-2, BLAST, and other simulations tools currently available. With California's net zero energy goals for new residential buildings in 2020 and for new commercial buildings in 2030, California needs to evaluate and promote currently available best practice and emerging technologies to significantly reduce energy use of buildings for space cooling and heating, ventilating, refrigerating, lighting, and water heating. The California Energy Commission (CEC) needs to adopt a new building energy simulation program for developing and maintaining future versions of Title 24. Therefore, EnergyPlus became a good candidate to CEC for its use in developing and complying with future Title 24 upgrades. In 2004, the Pacific Gas and Electric Company contracted with ArchitecturalEnergy Corporation (AEC), Taylor Engineering, and GARD Analytics to evaluate EnergyPlus in its ability to model those energy efficiency measures specified in both the residential and

  14. Coupled-cluster with active space selected higher amplitudes: performance of seminatural orbitals for ground and excited state calculations.

    PubMed

    Köhn, Andreas; Olsen, Jeppe

    2006-11-01

    The active space approach for coupled-cluster models is generalized using the general active space concept and implemented in a string-based general coupled-cluster code. Particular attention is devoted to the choice of orbitals on which the subspace division is based. Seminatural orbitals are proposed for that purpose. These orbitals are obtained by diagonalizing only the hole-hole and particle-particle block of the one-electron density of a lower-order method. The seminatural orbitals are shown to be a good replacement for complete active space self-consistent field orbitals and avoid the ambiguities with respect to the reference determinant introduced by the latter orbitals. The seminatural orbitals also perform well in excited state calculations, including excited states with strong double excitation contributions, which usually are difficult to describe with standard coupled-cluster methods. A set of vertical excitation energies is obtained and benchmarked against full configuration interaction calculations, and alternative hierarchies of active space coupled-cluster models are proposed. As a simple application the spectroscopic constants of the C(2) B (1)Delta(g) and B(') (1)Sigma(g) (+) states are calculated using active space coupled-cluster methods and basis sets up to quadruple-zeta quality in connection with extrapolation and additivity schemes. PMID:17100432

  15. Coupled-cluster with active space selected higher amplitudes: Performance of seminatural orbitals for ground and excited state calculations

    NASA Astrophysics Data System (ADS)

    Köhn, Andreas; Olsen, Jeppe

    2006-11-01

    The active space approach for coupled-cluster models is generalized using the general active space concept and implemented in a string-based general coupled-cluster code. Particular attention is devoted to the choice of orbitals on which the subspace division is based. Seminatural orbitals are proposed for that purpose. These orbitals are obtained by diagonalizing only the hole-hole and particle-particle block of the one-electron density of a lower-order method. The seminatural orbitals are shown to be a good replacement for complete active space self-consistent field orbitals and avoid the ambiguities with respect to the reference determinant introduced by the latter orbitals. The seminatural orbitals also perform well in excited state calculations, including excited states with strong double excitation contributions, which usually are difficult to describe with standard coupled-cluster methods. A set of vertical excitation energies is obtained and benchmarked against full configuration interaction calculations, and alternative hierarchies of active space coupled-cluster models are proposed. As a simple application the spectroscopic constants of the C2 BΔg1 and B'Σg+1 states are calculated using active space coupled-cluster methods and basis sets up to quadruple-zeta quality in connection with extrapolation and additivity schemes.

  16. Applying Activity Based Costing (ABC) Method to Calculate Cost Price in Hospital and Remedy Services

    PubMed Central

    Rajabi, A; Dabiri, A

    2012-01-01

    Background Activity Based Costing (ABC) is one of the new methods began appearing as a costing methodology in the 1990’s. It calculates cost price by determining the usage of resources. In this study, ABC method was used for calculating cost price of remedial services in hospitals. Methods: To apply ABC method, Shahid Faghihi Hospital was selected. First, hospital units were divided into three main departments: administrative, diagnostic, and hospitalized. Second, activity centers were defined by the activity analysis method. Third, costs of administrative activity centers were allocated into diagnostic and operational departments based on the cost driver. Finally, with regard to the usage of cost objectives from services of activity centers, the cost price of medical services was calculated. Results: The cost price from ABC method significantly differs from tariff method. In addition, high amount of indirect costs in the hospital indicates that capacities of resources are not used properly. Conclusion: Cost price of remedial services with tariff method is not properly calculated when compared with ABC method. ABC calculates cost price by applying suitable mechanisms but tariff method is based on the fixed price. In addition, ABC represents useful information about the amount and combination of cost price services. PMID:23113171

  17. Solar Energy Project, Activities: General Solar Topics.

    ERIC Educational Resources Information Center

    Tullock, Bruce, Ed.; And Others

    This guide contains lesson plans and outlines of activities which introduce students to concepts and issues relating to solar energy. Lessons frequently presented in the context of solar energy as it relates to contemporary energy problems. Each unit presents an introduction; objectives; necessary skills and knowledge; materials; method;…

  18. Continuous energy, multi-dimensional discrete ordinates transport calculations for problem dependent resonance treatment

    NASA Astrophysics Data System (ADS)

    Zhong, Zhaopeng

    In the past twenty 20 years considerable progress has been made in developing new methods for solving the multi-dimensional transport problem. However the effort devoted to the resonance self-shielding calculation has lagged, and much less progress has been made in enhancing resonance-shielding techniques for generating problem-dependent multi-group cross sections (XS) for the multi-dimensional transport calculations. In several applications, the error introduced by self-shielding methods exceeds that due to uncertainties in the basic nuclear data, and often they can be the limiting factor on the accuracy of the final results. This work is to improve the accuracy of the resonance self-shielding calculation by developing continuous energy multi-dimensional transport calculations for problem dependent self-shielding calculations. A new method has been developed, it can calculate the continuous-energy neutron fluxes for the whole two-dimensional domain, which can be utilized as weighting function to process the self-shielded multi-group cross sections for reactor analysis and criticality calculations, and during this process, the two-dimensional heterogeneous effect in the resonance self-shielding calculation can be fully included. A new code, GEMINEWTRN (Group and Energy-Pointwise Methodology Implemented in NEWT for Resonance Neutronics) has been developed in the developing version of SCALE [1], it combines the energy pointwise (PW) capability of the CENTRM [2] with the two-dimensional discrete ordinates transport capability of lattice physics code NEWT [14]. Considering the large number of energy points in the resonance region (typically more than 30,000), the computational burden and memory requirement for GEMINEWTRN is tremendously large, some efforts have been performed to improve the computational efficiency, parallel computation has been implemented into GEMINEWTRN, which can save the computation and memory requirement a lot; some energy points reducing

  19. Microscopic calculations of nuclear and neutron matter, symmetry energy and neutron stars

    DOE PAGES

    Gandolfi, S.

    2015-02-01

    We present Quantum Monte Carlo calculations of the equation of state of neutron matter. The equation of state is directly related to the symmetry energy and determines the mass and radius of neutron stars, providing then a connection between terrestrial experiments and astronomical observations. As a result, we also show preliminary results of the equation of state of nuclear matter.

  20. Kinetic energies to analyze the experimental auger electron spectra by density functional theory calculations

    NASA Astrophysics Data System (ADS)

    Endo, Kazunaka

    2016-02-01

    In the Auger electron spectra (AES) simulations, we define theoretical modified kinetic energies of AES in the density functional theory (DFT) calculations. The modified kinetic energies correspond to two final-state holes at the ground state and at the transition-state in DFT calculations, respectively. This method is applied to simulate Auger electron spectra (AES) of 2nd periodic atom (Li, Be, B, C, N, O, F)-involving substances (LiF, beryllium, boron, graphite, GaN, SiO2, PTFE) by deMon DFT calculations using the model molecules of the unit cell. Experimental KVV (valence band electrons can fill K-shell core holes or be emitted during KVV-type transitions) AES of the (Li, O) atoms in the substances agree considerably well with simulation of AES obtained with the maximum kinetic energies of the atoms, while, for AES of LiF, and PTFE substance, the experimental F KVV AES is almost in accordance with the spectra from the transitionstate kinetic energy calculations.

  1. A Method for Calculating Fermi Energy and Carrier Concentrations in Semiconducts

    ERIC Educational Resources Information Center

    Gaylord, T. K.; Linxwiler, J. N., Jr.

    1976-01-01

    An efficient numerical method for calculating the Fermi energy, the free electron and free hole concentrations, and the ionized impurity conductors in a semiconductor material is described. The method allows freedom with respect to type of material, temperature, and amount and type of donor and acceptor impurities. (Author/CP)

  2. Parallel AFMPB solver with automatic surface meshing for calculation of molecular solvation free energy

    NASA Astrophysics Data System (ADS)

    Zhang, Bo; Peng, Bo; Huang, Jingfang; Pitsianis, Nikos P.; Sun, Xiaobai; Lu, Benzhuo

    2015-05-01

    We present PAFMPB, an updated and parallel version of the AFMPB software package for fast calculation of molecular solvation-free energy. The new version has the following new features: (1) The adaptive fast multipole method and the boundary element methods are parallelized; (2) A tool is embedded for automatic molecular VDW/SAS surface mesh generation, leaving the requirement for a mesh file at input optional; (3) The package provides fast calculation of the total solvation-free energy, including the PB electrostatic and nonpolar interaction contributions. PAFMPB is implemented in C and Fortran programming languages, with the Cilk Plus extension to harness the computing power of both multicore and vector processing. Computational experiments demonstrate the successful application of PAFMPB to the calculation of the PB potential on a dengue virus system with more than one million atoms and a mesh with approximately 20 million triangles.

  3. Calculation of energy levels and transition amplitudes for barium and radium.

    SciTech Connect

    Dzuba, V. A.; Flambaum, V. V.; Physics; Univ. of New South Wales

    2007-01-01

    The radium atom is a promising system for studying parity and time invariance violating weak interactions. However, available experimental spectroscopic data for radium are insufficient for designing an optimal experimental setup. We calculate the energy levels and transition amplitudes for radium states of significant interest. Forty states corresponding to all possible configurations consisting of the 7s, 7p and 6d single-electron states as well as the states of the 7s8s, 7s8p and 7s7d configurations have been calculated. The energies of ten of these states corresponding to the 6d{sup 2}, 7s8s, 7p{sup 2} and 6d7p configurations are not known from experiment. Calculations for barium are used to control the accuracy.

  4. Automated calculation of surface energy fluxes with high-frequency lake buoy data

    USGS Publications Warehouse

    Woolway, R Iestyn; Jones, Ian D; Hamilton, David P.; Maberly, Stephen C; Muroaka, Kohji; Read, Jordan S.; Smyth, Robyn L; Winslow, Luke A.

    2015-01-01

    Lake Heat Flux Analyzer is a program used for calculating the surface energy fluxes in lakes according to established literature methodologies. The program was developed in MATLAB for the rapid analysis of high-frequency data from instrumented lake buoys in support of the emerging field of aquatic sensor network science. To calculate the surface energy fluxes, the program requires a number of input variables, such as air and water temperature, relative humidity, wind speed, and short-wave radiation. Available outputs for Lake Heat Flux Analyzer include the surface fluxes of momentum, sensible heat and latent heat and their corresponding transfer coefficients, incoming and outgoing long-wave radiation. Lake Heat Flux Analyzer is open source and can be used to process data from multiple lakes rapidly. It provides a means of calculating the surface fluxes using a consistent method, thereby facilitating global comparisons of high-frequency data from lake buoys.

  5. Symmetry adapted cluster-configuration interaction calculation of the photoelectron spectra of famous biological active steroids

    NASA Astrophysics Data System (ADS)

    Abyar, Fatemeh; Farrokhpour, Hossein

    2014-11-01

    The photoelectron spectra of some famous steroids, important in biology, were calculated in the gas phase. The selected steroids were 5α-androstane-3,11,17-trione, 4-androstane-3,11,17-trione, cortisol, cortisone, corticosterone, dexamethasone, estradiol and cholesterol. The calculations were performed employing symmetry-adapted cluster/configuration interaction (SAC-CI) method using the 6-311++G(2df,pd) basis set. The population ratios of conformers of each steroid were calculated and used for simulating the photoelectron spectrum of steroid. It was found that more than one conformer contribute to the photoelectron spectra of some steroids. To confirm the calculated photoelectron spectra, they compared with their corresponding experimental spectra. There were no experimental gas phase Hesbnd I photoelectron spectra for some of the steroids of this work in the literature and their calculated spectra can show a part of intrinsic characteristics of this molecules in the gas phase. The canonical molecular orbitals involved in the ionization of each steroid were calculated at the HF/6-311++g(d,p) level of theory. The spectral bands of each steroid were assigned by natural bonding orbital (NBO) calculations. Knowing the electronic structures of steroids helps us to understand their biological activities and find which sites of steroid become active when a modification is performing under a biological pathway.

  6. An efficient method for energy levels calculation using full symmetry and exact kinetic energy operator: Tetrahedral molecules

    SciTech Connect

    Nikitin, A. V.; Rey, M.; Tyuterev, Vl. G.

    2015-03-07

    A simultaneous use of the full molecular symmetry and of an exact kinetic energy operator (KEO) is of key importance for accurate predictions of vibrational levels at a high energy range from a potential energy surface (PES). An efficient method that permits a fast convergence of variational calculations would allow iterative optimization of the PES parameters using experimental data. In this work, we propose such a method applied to tetrahedral AB{sub 4} molecules for which a use of high symmetry is crucial for vibrational calculations. A symmetry-adapted contracted angular basis set for six redundant angles is introduced. Simple formulas using this basis set for explicit calculation of the angular matrix elements of KEO and PES are reported. The symmetric form (six redundant angles) of vibrational KEO without the sin(q){sup −2} type singularity is derived. The efficient recursive algorithm based on the tensorial formalism is used for the calculation of vibrational matrix elements. A good basis set convergence for the calculations of vibrational levels of the CH{sub 4} molecule is demonstrated.

  7. A method for calculating strain energy release rate based on beam theory

    NASA Technical Reports Server (NTRS)

    Sun, C. T.; Pandey, R. K.

    1993-01-01

    The Timoshenko beam theory was used to model cracked beams and to calculate the total strain energy release rate. The root rotation of the beam segments at the crack tip were estimated based on an approximate 2D elasticity solution. By including the strain energy released due to the root rotations of the beams during crack extension, the strain energy release rate obtained using beam theory agrees very well with the 2D finite element solution. Numerical examples were given for various beam geometries and loading conditions. Comparisons with existing beam models were also given.

  8. Improved method for calculating strain energy release rate based on beam theory

    NASA Technical Reports Server (NTRS)

    Sun, C. T.; Pandey, R. K.

    1994-01-01

    The Timoshenko beam theory was used to model cracked beams and to calculate the total strain-energy release rate. The root rotations of the beam segments at the crack tip were estimated based on an approximate two-dimensional elasticity solution. By including the strain energy released due to the root rotations of the beams during crack extension, the strain-energy release rate obtained using beam theory agrees very well with the two-dimensional finite element solution. Numerical examples were given for various beam geometries and loading conditions. Comparisons with existing beam models were also given.

  9. Constrained LDA ab-initio calculation of screening of charging energy in C60

    NASA Astrophysics Data System (ADS)

    Sau, Jay; Neaton, Jeffrey; Khoo, K. H.; Choi, Hyoung; Louie, Steven; Cohen, Marvin

    2006-03-01

    Recent measurements and theoretical calculations of the electronic properties of C60 on metal substrates have shown that the electron-electron repulsion parameter U, which determines the coulomb blockade transport properties, is strongly screened in the presence of a metal susbtrate. Since standard Density Functional Theory calculations treat this charging energy in a mean field sense, it ignores the discreteness of the charge on the C60 that is critical to coulomb blockade. To account for the effect of the screened U in transport experiments we calculate the charging energy of C60 in a few environments using a constrained LDA approach and explore the implications for coulomb blockade transport phenomena. This work was supported by National Science Foundation Grant No. DMR04-39768 and by the Director, Office of Science, Office of Basic Energy Sciences, Division of Material Sciences and Engineering, U. S Department of Energy under Contract No. DE-AC03-76SF00098. Computational resources have been provided by DOE at the National Energy Research Scientific Computing Center(NERSC)

  10. Calculations of heat deposition in a target system bombarded by high energy charged particles

    NASA Astrophysics Data System (ADS)

    Nishida, Takahiko; Nakahara, Yasuaki

    1984-09-01

    At the Japan Atomic Energy Research Institute (JAERI), with the use of the Monte Carlo code NMTC/JAERI and the analysis code NMTA, studies have been performed of the feasibility of an emerging new technology such as an accelerator nuclear fuel producer or a radioactive waste transmuter, which utilizes abundant neutrons emitted by the spallation and fission reactions in a proton accelerator target. New subroutines were added to the NMTA code calculating the total heat deposition and the spatial distribution of heat deposition density in a target. A new subroutine is provided also for estimating the mean excitation energy of recoiling residual nuclei after the particle evaporation ceased to occur. The NMTC/JAERI flow for a fission event was also modified. The processes that account for the heat producing energy in the range greater than 15 MeV are mainly (a) ionization loss by charged particles through transport and (b) the kinetic energy of recoil nuclei after intranuclear cascades and fissions. Preliminary calculations of the heat deposition are carried out for small bare targets of Pb, Nat. U and molten salts for some combinations of incident particle energy, beam radius, target material and size. The new computational routines are explained in detail and discussions are done on the calculated results.

  11. Free energy calculations, enhanced by a Gaussian ansatz, for the "chemical work" distribution.

    PubMed

    Boulougouris, Georgios C

    2014-05-15

    The evaluation of the free energy is essential in molecular simulation because it is intimately related with the existence of multiphase equilibrium. Recently, it was demonstrated that it is possible to evaluate the Helmholtz free energy using a single statistical ensemble along an entire isotherm by accounting for the "chemical work" of transforming each molecule, from an interacting one, to an ideal gas. In this work, we show that it is possible to perform such a free energy perturbation over a liquid vapor phase transition. Furthermore, we investigate the link between a general free energy perturbation scheme and the novel nonequilibrium theories of Crook's and Jarzinsky. We find that for finite systems away from the thermodynamic limit the second law of thermodynamics will always be an inequality for isothermal free energy perturbations, resulting always to a dissipated work that may tend to zero only in the thermodynamic limit. The work, the heat, and the entropy produced during a thermodynamic free energy perturbation can be viewed in the context of the Crooks and Jarzinsky formalism, revealing that for a given value of the ensemble average of the "irreversible" work, the minimum entropy production corresponded to a Gaussian distribution for the histogram of the work. We propose the evaluation of the free energy difference in any free energy perturbation based scheme on the average irreversible "chemical work" minus the dissipated work that can be calculated from the variance of the distribution of the logarithm of the work histogram, within the Gaussian approximation. As a consequence, using the Gaussian ansatz for the distribution of the "chemical work," accurate estimates for the chemical potential and the free energy of the system can be performed using much shorter simulations and avoiding the necessity of sampling the computational costly tails of the "chemical work." For a more general free energy perturbation scheme that the Gaussian ansatz may not be

  12. Hybrid energy harvesting using active thermal backplane

    NASA Astrophysics Data System (ADS)

    Kim, Hyun-Wook; Lee, Dong-Gun

    2016-04-01

    In this study, we demonstrate the concept of a new hybrid energy harvesting system by combing solar cells with magneto-thermoelectric generator (MTG, i.e., thermal energy harvesting). The silicon solar cell can easily reach high temperature under normal operating conditions. Thus the heated solar cell becomes rapidly less efficient as the temperature of solar cell rises. To increase the efficiency of the solar cell, air or water-based cooling system is used. To surpass conventional cooling devices requiring additional power as well as large working space for air/water collectors, we develop a new technology of pairing an active thermal backplane (ATB) to solar cell. The ATB design is based on MTG technology utilizing the physics of the 2nd order phase transition of active ferromagnetic materials. The MTG is cost-effective conversion of thermal energy to electrical energy and is fundamentally different from Seebeck TEG devices. The ATB (MTG) is in addition to being an energy conversion system, a very good conveyor of heat through both conduction and convection. Therefore, the ATB can provide dual-mode for the proposed hybrid energy harvesting. One is active convective and conductive cooling for heated solar cell. Another is active thermal energy harvesting from heat of solar cell. These novel hybrid energy harvesting device have potentially simultaneous energy conversion capability of solar and thermal energy into electricity. The results presented can be used for better understanding of hybrid energy harvesting system that can be integrated into commercial applications.

  13. Long-range correlation energy calculated from coupled atomic response functions

    SciTech Connect

    Ambrosetti, Alberto; Reilly, Anthony M.; Tkatchenko, Alexandre; DiStasio, Robert A.

    2014-05-14

    An accurate determination of the electron correlation energy is an essential prerequisite for describing the structure, stability, and function in a wide variety of systems. Therefore, the development of efficient approaches for the calculation of the correlation energy (and hence the dispersion energy as well) is essential and such methods can be coupled with many density-functional approximations, local methods for the electron correlation energy, and even interatomic force fields. In this work, we build upon the previously developed many-body dispersion (MBD) framework, which is intimately linked to the random-phase approximation for the correlation energy. We separate the correlation energy into short-range contributions that are modeled by semi-local functionals and long-range contributions that are calculated by mapping the complex all-electron problem onto a set of atomic response functions coupled in the dipole approximation. We propose an effective range-separation of the coupling between the atomic response functions that extends the already broad applicability of the MBD method to non-metallic materials with highly anisotropic responses, such as layered nanostructures. Application to a variety of high-quality benchmark datasets illustrates the accuracy and applicability of the improved MBD approach, which offers the prospect of first-principles modeling of large structurally complex systems with an accurate description of the long-range correlation energy.

  14. Learning Approach on the Ground State Energy Calculation of Helium Atom

    SciTech Connect

    Shah, Syed Naseem Hussain

    2010-07-28

    This research investigated the role of learning approach on the ground state energy calculation of Helium atom in improving the concepts of science teachers at university level. As the exact solution of several particles is not possible here we used approximation methods. Using this method one can understand easily the calculation of ground state energy of any given function. Variation Method is one of the most useful approximation methods in estimating the energy eigen values of the ground state and the first few excited states of a system, which we only have a qualitative idea about the wave function.The objective of this approach is to introduce and involve university teacher in new research, to improve their class room practices and to enable teachers to foster critical thinking in students.

  15. Learning Approach on the Ground State Energy Calculation of Helium Atom

    NASA Astrophysics Data System (ADS)

    Shah, Syed Naseem Hussain

    2010-07-01

    This research investigated the role of learning approach on the ground state energy calculation of Helium atom in improving the concepts of science teachers at university level. As the exact solution of several particles is not possible here we used approximation methods. Using this method one can understand easily the calculation of ground state energy of any given function. Variation Method is one of the most useful approximation methods in estimating the energy eigen values of the ground state and the first few excited states of a system, which we only have a qualitative idea about the wave function. The objective of this approach is to introduce and involve university teacher in new research, to improve their class room practices and to enable teachers to foster critical thinking in students.

  16. A highly efficient hybrid method for calculating the hydration free energy of a protein.

    PubMed

    Oshima, Hiraku; Kinoshita, Masahiro

    2016-03-30

    We develop a new method for calculating the hydration free energy (HFE) of a protein with any net charge. The polar part of the energetic component in the HFE is expressed as a linear combination of four geometric measures (GMs) of the protein structure and the generalized Born (GB) energy plus a constant. The other constituents in the HFE are expressed as linear combinations of the four GMs. The coefficients (including the constant) in the linear combinations are determined using the three-dimensional reference interaction site model (3D-RISM) theory applied to sufficiently many protein structures. Once the coefficients are determined, the HFE and its constituents of any other protein structure are obtained simply by calculating the four GMs and GB energy. Our method and the 3D-RISM theory give perfectly correlated results. Nevertheless, the computation time required in our method is over four orders of magnitude shorter.

  17. Implicit versus explicit solvent in free energy calculations of enzyme catalysis: Methyl transfer catalyzed by catechol O-methyltransferase

    NASA Astrophysics Data System (ADS)

    Rod, Thomas H.; Rydberg, Patrik; Ryde, Ulf

    2006-05-01

    We compare free energy calculations for the methyl transfer reaction catalyzed by catechol O-methyltransferase using the quantum mechanical/molecular mechanical free energy method with implicit and explicit solvents. An analogous methylation reaction in a solution is also studied. For the explicit solvent model, we use the three-point transferable intermolecular potential model, and for the implicit model, we use the generalized Born molecular volume model as implemented in CHARMM. We find that activation and reaction free energies calculated with the two models are very similar, despite some structural differences that exist. A significant change in the polarization of the environment occurs as the reaction proceeds. This is more pronounced for the reaction in a solution than for the enzymatic reaction. For the enzymatic reaction, most of the changes take place in the protein rather than in the solvent, and, hence, the benefit of having an instantaneous relaxation of the solvent degrees of freedom is less pronounced for the enzymatic reaction than for the reaction in a solution. This is a likely reason why energies of the enzyme reaction are less sensitive to the choice of atomic radii than are energies of the reaction in a solution.

  18. On the calculation of activity concentrations and nuclide ratios from measurements of atmospheric radioactivity.

    PubMed

    Axelsson, A; Ringbom, A

    2014-09-01

    Motivated by the need for consistent use of concepts central to the reporting of results from measurements of atmospheric radioactivity, we discuss some properties of the methods commonly used. Different expressions for decay correction of the activity concentration for parent-daughter decay pairs are presented, and it is suggested that this correction should be performed assuming parent-daughter ingrowth in the sample during the entire measurement process. We note that, as has already been suggested by others, activities rather than activity concentrations should be used when nuclide ratios are calculated. In addition, expressions that can be used to transform activity concentrations to activity ratios are presented. Finally we note that statistical uncertainties for nuclide ratios can be properly calculated using the exact solution to the problem of confidence intervals for a ratio of two jointly normally distributed variables, the so-called Fieller׳s theorem.

  19. Fast Calculations of Electrostatic Solvation Free Energy from Reconstructed Solvent Density Using Proximal Radial Distribution Functions

    SciTech Connect

    Lin, Bin; Wong, Ka-Yiu; Hu, Char Y.; Kokubo, Hironori; Pettitt, Bernard M.

    2011-07-07

    Although detailed atomic models may be applied for a full description of solvation, simpler phenomenologicalmodels are particularly useful to interpret the results for scanning many large, complex systems, where a full atomic model is too computationally expensive to use. Among the most costly are solvation free-energy evaluations by simulation. Here we develop a fast way to calculate electrostatic solvation free energy while retaining much of the accuracy of explicit solvent free-energy simulation. The basis of our method is to treat the solvent not as a structureless dielectric continuum but as a structured medium by making use of universal proximal radial distribution functions. Using a deca-alanine peptide as a test case, we compare the use of our theory with free-energy simulations and traditional continuum estimates of the electrostatic solvation free energy.

  20. Comparison of Measured Leakage Current Distributions with Calculated Damage Energy Distributions in HgCdTe

    NASA Technical Reports Server (NTRS)

    Marshall, C. J.; Ladbury, R.; Marshall, P. W.; Reed, R. A.; Howe, C.; Weller, B.; Mendenhall, M.; Waczynski, A.; Jordan, T. M.; Fodness, B.

    2006-01-01

    This paper presents a combined Monte Carlo and analytic approach to the calculation of the pixel-to-pixel distribution of proton-induced damage in a HgCdTe sensor array and compares the results to measured dark current distributions after damage by 63 MeV protons. The moments of the Coulombic, nuclear elastic and nuclear inelastic damage distribution were extracted from Monte Carlo simulations and combined to form a damage distribution using the analytic techniques first described in [I]. The calculations show that the high energy recoils from the nuclear inelastic reactions (calculated using the Monte Car10 code MCNPX [2]) produce a pronounced skewing of the damage energy distribution. The nuclear elastic component (also calculated using the MCNPX) has a negligible effect on the shape of the damage distribution. The Coulombic contribution was calculated using MRED [3,4], a Geant4 [4,5] application. The comparison with the dark current distribution strongly suggests that mechanisms which are not linearly correlated with nonionizing damage produced according to collision kinematics are responsible for the observed dark current increases. This has important implications for the process of predicting the on-orbit dark current response of the HgCdTe sensor array.

  1. Strain and Cohesive Energy of TiN Deposit on Al(001) Surface: Density Functional Calculation

    NASA Astrophysics Data System (ADS)

    Ren, Yuan; Liu, Xuejie

    2016-07-01

    To apply the high hardness of TiN film to soft and hard multilayer composite sheets, we constructed a new type of composite structural material with ultra-high strength. The strain of crystal and cohesive energy between the atoms in the eight structures of N atom, Ti atom, 2N2Ti island and TiN rock salt deposited on the Al(001) surface were calculated with the first-principle ultra-soft pseudopotential approach of the plane wave based on the density functional theory. The calculations of the cohesive energy showed that N atoms could be deposited in the face-centered-cubic vacancy position of the Al(001) surface and results in a cubic structure AlN surface. The TiN film could be deposited on the interface of β-AlN. The calculations of the strains showed that the strain in the TiN film deposited on the Al(001) surface was less than that in the 2N2Ti island deposited on the Al(001) surface. The diffusion behavior of interface atom N was investigated by a nudged elastic band method. Diffusion energy calculation showed that the N atom hardly diffused to the substrate Al layer.

  2. Toward understanding as photosynthetic biosignatures: light harvesting and energy transfer calculation

    NASA Astrophysics Data System (ADS)

    Komatsu, Y.; Umemura, M.; Shoji, M.; Shiraishi, K.; Kayanuma, M.; Yabana, K.

    2014-03-01

    Among several proposed biosignatures, red edge is a direct evidence of photosynthetic life if it is detected (Kiang et al 2007). Red edge is a sharp change in reflectance spectra of vegetation in NIR region (about 700-750 nm). The sign of red edge is observed by Earthshine or remote sensing (Wolstencroft & Raven 2002, Woolf et al 2002). But, why around 700-750 nm? The photosynthetic organisms on Earth have evolved to optimize the sunlight condition. However, if we consider about photosynthetic organism on extrasolar planets, they should have developed to utilize the spectra of its principal star. Thus, it is not strange even if it shows different vegetation spectra. In this study, we focused on the light absorption mechanism of photosynthetic organisms on Earth and investigated the fundamental properties of the light harvesting mechanisms, which is the first stage for the light absorption. Light harvesting complexes contain photosynthetic pigments like chlorophylls. Effective light absorption and the energy transfer are accomplished by the electronic excitations of collective photosynthetic pigments. In order to investigate this mechanism, we constructed an energy transfer model by using a dipole-dipole approximation for the interactions between electronic excitations. Transition moments and transition energies of each pigment are calculated at the time-dependent density functional theory (TDDFT) level (Marques & Gross 2004). Quantum dynamics simulation for the excitation energy transfer was calculated by the Liouvelle's equation. We adopted the model to purple bacteria, which has been studied experimentally and known to absorb lower energy. It is meaningful to focus on the mechanism of this bacteria, since in the future mission, M planets will become a important target. We calculated the oscillator strengths in one light harvesting complex and confirmed the validity by comparing to the experimental data. This complex is made of an inner and an outer ring. The

  3. Comparison of the active-site design of molybdenum oxo-transfer enzymes by quantum mechanical calculations.

    PubMed

    Li, Jilai; Ryde, Ulf

    2014-11-17

    There are three families of mononuclear molybdenum enzymes that catalyze oxygen atom transfer (OAT) reactions, named after a typical example from each family, viz., dimethyl sulfoxide reductase (DMSOR), sulfite oxidase (SO), and xanthine oxidase (XO). These families differ in the construction of their active sites, with two molybdopterin groups in the DMSOR family, two oxy groups in the SO family, and a sulfido group in the XO family. We have employed density functional theory calculations on cluster models of the active sites to understand the selection of molybdenum ligands in the three enzyme families. Our calculations show that the DMSOR active site has a much stronger oxidative power than the other two sites, owing to the extra molybdopterin ligand. However, the active sites do not seem to have been constructed to make the OAT reaction as exergonic as possible, but instead to keep the reaction free energy close to zero (to avoid excessive loss of energy), thereby making the reoxidation (SO and XO) or rereduction of the active sites (DMSOR) after the OAT reaction facile. We also show that active-site models of the three enzyme families can all catalyze the reduction of DMSO and that the DMSOR model does not give the lowest activation barrier. Likewise, all three models can catalyze the oxidation of sulfite, provided that the Coulombic repulsion between the substrate and the enzyme model can be overcome, but for this harder reaction, the SO model gives the lowest activation barrier, although the differences are not large. However, only the XO model can catalyze the oxidation of xanthine, owing to its sulfido ligand.

  4. An Exact Calculation of Electron-Ion Energy Splitting in a Hot Plasma

    SciTech Connect

    Singleton, Robert L

    2012-09-10

    In this brief report, I summarize the rather involved recent work of Brown, Preston, and Singleton (BPS). In Refs. [2] and [3], BPS calculate the energy partition into ions and electrons as a charged particle traverses a non-equilibrium two-temperature plasma. These results are exact to leading and next-to-leading order in the plasma coupling g, and are therefore extremely accurate in a weakly coupled plasma. The new BPS calculations are compared with the more standard work of Fraley et al. [12]. The results differ substantially at higher temperature when T{sub I} {ne} T{sub e}.

  5. First-principles calculations of free energies of unstable phases: the case of fcc W.

    PubMed

    Ozolins, V

    2009-02-13

    Ab initio molecular dynamics simulations are used to solve the long-standing problem of calculating the free energies of unstable phases, such as fcc W. We find that fcc W is mechanically unstable with respect to long-wavelength shear at all temperatures considered (T>2500 K), while the short-wavelength phonon modes are anharmonically stabilized. The calculated fcc-bcc enthalpy and entropy differences at T=3500 K (308 meV and 0.74k_{B} per atom, respectively) agree well with the recent values derived from analysis of experimental data.

  6. Transformation of potential energy surfaces for estimating isotopic shifts in anharmonic vibrational frequency calculations

    SciTech Connect

    Meier, Patrick; Oschetzki, Dominik; Rauhut, Guntram; Berger, Robert

    2014-05-14

    A transformation of potential energy surfaces (PES) being represented by multi-mode expansions is introduced, which allows for the calculation of anharmonic vibrational spectra of any isotopologue from a single PES. This simplifies the analysis of infrared spectra due to significant CPU-time savings. An investigation of remaining deviations due to truncations and the so-called multi-level approximation is provided. The importance of vibrational-rotational couplings for small molecules is discussed in detail. In addition, an analysis is proposed, which provides information about the quality of the transformation prior to its execution. Benchmark calculations are provided for a set of small molecules.

  7. A refined quartic potential energy surface and large scale vibrational calculations for S0 thiophosgene.

    PubMed

    Rashev, Svetoslav; Moule, David C

    2015-04-01

    In this work we present a full 6D quartic potential energy surface (PES) for S0 thiophosgene in curvilinear symmetrized bond-angle coordinates. The PES was refined starting from an ab initio field derived from acc-pVTZ basis set with CCSD(T) corrections for electron correlation. In the present calculations we used our variational method that was recently tested on formaldehyde and some of its isotopomers, along with additional improvements. The lower experimentally known vibrational levels for 35Cl2CS were reproduced quite well in the calculations, which can be regarded as a test for the feasibility of the obtained quartic PES. PMID:25615683

  8. Calculation of quasiparticle energy spectrum of silicon using the correlated Hartree-Fock method

    NASA Astrophysics Data System (ADS)

    Ishihara, Takamitsu; Yamagami, Hiroshi; Matsuzawa, Kazuya; Yasuhara, Hiroshi

    1999-06-01

    We present quasiparticle energy spectrum calculations of silicon using the correlated Hartree-Fock method proposed by Yasuhara and Takada [Phys. Rev. B 43, 7200 (1991)], in which the information on the effective mass of an electron liquid is included in the form of a nonlocal spin-parallel potential in addition to a local potential. The calculated band gaps of silicon are much improved, compared with the local density approximation values. The minimum indirect band gap is evaluated to be 1.37 eV.

  9. Development of continuous-energy eigenvalue sensitivity coefficient calculation methods in the shift Monte Carlo Code

    SciTech Connect

    Perfetti, C.; Martin, W.; Rearden, B.; Williams, M.

    2012-07-01

    Three methods for calculating continuous-energy eigenvalue sensitivity coefficients were developed and implemented into the Shift Monte Carlo code within the SCALE code package. The methods were used for two small-scale test problems and were evaluated in terms of speed, accuracy, efficiency, and memory requirements. A promising new method for calculating eigenvalue sensitivity coefficients, known as the CLUTCH method, was developed and produced accurate sensitivity coefficients with figures of merit that were several orders of magnitude larger than those from existing methods. (authors)

  10. Mayer sampling: calculation of cluster integrals using free-energy perturbation methods.

    PubMed

    Singh, Jayant K; Kofke, David A

    2004-06-01

    Free-energy simulation methods are applied toward the calculation of cluster integrals that appear in diagrammatic methods of statistical mechanics. In this approach, Monte Carlo sampling is performed on a number of molecules equal to the order of the integral, and configurations are weighted according to the absolute value of the integrand. An umbrella-sampling average yields the value of the cluster integral in reference to a known integral. Virial coefficients, up to the sixth for the Lennard-Jones model and the fifth for the SPCE model of water, are calculated as a demonstration.

  11. Computational scheme for pH-dependent binding free energy calculation with explicit solvent.

    PubMed

    Lee, Juyong; Miller, Benjamin T; Brooks, Bernard R

    2016-01-01

    We present a computational scheme to compute the pH-dependence of binding free energy with explicit solvent. Despite the importance of pH, the effect of pH has been generally neglected in binding free energy calculations because of a lack of accurate methods to model it. To address this limitation, we use a constant-pH methodology to obtain a true ensemble of multiple protonation states of a titratable system at a given pH and analyze the ensemble using the Bennett acceptance ratio (BAR) method. The constant pH method is based on the combination of enveloping distribution sampling (EDS) with the Hamiltonian replica exchange method (HREM), which yields an accurate semi-grand canonical ensemble of a titratable system. By considering the free energy change of constraining multiple protonation states to a single state or releasing a single protonation state to multiple states, the pH dependent binding free energy profile can be obtained. We perform benchmark simulations of a host-guest system: cucurbit[7]uril (CB[7]) and benzimidazole (BZ). BZ experiences a large pKa shift upon complex formation. The pH-dependent binding free energy profiles of the benchmark system are obtained with three different long-range interaction calculation schemes: a cutoff, the particle mesh Ewald (PME), and the isotropic periodic sum (IPS) method. Our scheme captures the pH-dependent behavior of binding free energy successfully. Absolute binding free energy values obtained with the PME and IPS methods are consistent, while cutoff method results are off by 2 kcal mol(-1) . We also discuss the characteristics of three long-range interaction calculation methods for constant-pH simulations.

  12. A robust force field based method for calculating conformational energies of charged drug-like molecules.

    PubMed

    Poehlsgaard, Jacob; Harpsøe, Kasper; Jørgensen, Flemming Steen; Olsen, Lars

    2012-02-27

    The binding affinity of a drug-like molecule depends among other things on the availability of the bioactive conformation. If the bioactive conformation has a significantly higher energy than the global minimum energy conformation, then the molecule is unlikely to bind to its target. Determination of the global minimum energy conformation and calculation of conformational penalties of binding is a prerequisite for prediction of reliable binding affinities. Here, we present a simple and computationally efficient procedure to estimate the global energy minimum for a wide variety of structurally diverse molecules, including polar and charged compounds. Identifying global energy minimum conformations of such compounds with force field methods is problematic due to the exaggeration of intramolecular electrostatic interactions. We demonstrate that the global energy minimum conformations of zwitterionic compounds generated by conformational analysis with modified electrostatics are good approximations of the conformational distributions predicted by experimental data and with molecular dynamics performed in explicit solvent. Finally the method is used to calculate conformational penalties for zwitterionic GluA2 agonists and to filter false positives from a docking study. PMID:21985436

  13. Metadyn View: Fast web-based viewer of free energy surfaces calculated by metadynamics

    NASA Astrophysics Data System (ADS)

    Hošek, Petr; Spiwok, Vojtěch

    2016-01-01

    Metadynamics is a highly successful enhanced sampling technique for simulation of molecular processes and prediction of their free energy surfaces. An in-depth analysis of data obtained by this method is as important as the simulation itself. Although there are several tools to compute free energy surfaces from metadynamics data, they usually lack user friendliness and a build-in visualization part. Here we introduce Metadyn View as a fast and user friendly viewer of bias potential/free energy surfaces calculated by metadynamics in Plumed package. It is based on modern web technologies including HTML5, JavaScript and Cascade Style Sheets (CSS). It can be used by visiting the web site and uploading a HILLS file. It calculates the bias potential/free energy surface on the client-side, so it can run online or offline without necessity to install additional web engines. Moreover, it includes tools for measurement of free energies and free energy differences and data/image export.

  14. Calculation of utmost parameters of active vision system based on nonscanning thermal imager

    NASA Astrophysics Data System (ADS)

    Sviridov, A. N.

    2003-09-01

    An active vision system (AVS) based on a non scanning thermal imager (TI) and CO2 - quantum amplifier of the image is offered. AVS mathematical model within which investigation of utmost signal / noise values and other system parameters depending on the distances to the scene - the area of observation (AO), an illumination impulse energy (W), an amplification factor (K) of a quantum amplifier, objective lens characteristics, spectral band width of a cooled filter of the thermal imager as well as object and scene characteristics is developed. Calculations were carried out for the following possible operating modes of a discussed vision system: - an active mode of a thermal imager with a cooled wideband filter; an active mode of a thermal imager with a cooled narrowband filter; - passive mode (W = 0, K = 1) of a thermal imager with a cooled wideband filter. As a result of carried out researches the opportunity and expediency of designing AVS, having a nonscanning thermal imager, impulse CO2 - quantum image amplifier and impulse CO2 - illumination laser are shown. It is shown that AVS have advantages over thermal imaging at observation of objects, temperature and reflection factors of which differ slightly from similar parameters of the scene. AVS depending on the W-K product can detect at a distance of up to 3000..5000m practically any local changes (you are interested in ) of a reflection factor. AVS not replacing the thermal imaging allow to receive additional information about observation objects. The images obtained with the help of AVS are more natural and more easy identified than thermal images received at the expense of the object own radiation. For quantitative determination of utmost values of AVS sensitivity it is offered to introduce a new parameter - NERD - 'radiation nose equivalent reflection factors difference'. IR active vision systems of vision, as well as a human vision and vision systems in the near IR - range on the basis image intensifiers

  15. A Comparison of the ab Initio Calculated and Experimental Conformational Energies of Alkylcyclohexanes

    NASA Astrophysics Data System (ADS)

    Freeman, Fillmore; Tsegai, Zufan M.; Kasner, Marc L.; Hehre, Warren J.

    2000-05-01

    Ab initio 6-31G(d) and MP2/6-31G(d)//6-31G(d) methods were used to calculate the energies of the rotamers of the chair conformers of alkylcyclohexanes and trimethylsilylcyclohexane. The MP2/6-31G(d)//6-31G(d) calculated conformational energies ( ? or A values, in kcal/mol) of the alkylcyclohexanes (Me = 1.96; Et = 1.80; Pr = 1.73 iso-Pr = 1.60; t-Bu = 5.45; neo-pent = 1.32) and trimethylsilylcyclohexane (SiMe3 = 2.69) are similar to the experimental values. Plots of the calculated conformational energies for the alkylcyclohexanes and trimethylsilylcyclohexane versus their experimental values are linear (slope = 1.253 and r = .993 for 6-31G(d) and slope = 1.114 and r = .982 for MP2/6-31G(d)//6-31G(d)). The conformational energies are determined primarily by steric effects which include gauche (synclinal) interactions and repulsive nonbonded interactions in both the axial and equatorial conformers.

  16. A review on minimum energy calculations for ideal and nonideal distillations

    SciTech Connect

    Koehler, J.; Poellmann, P.; Blass, E.

    1995-04-01

    The minimum energy requirement of a distillation sets a lower, thermodynamically defined operating limit, which is increasingly important in practice due to growing interest in saving energy. During the conceptual design phase this energy information can also be used to quickly compare distillation configurations. This paper gives a summary of the most important methods published to date for the calculation of the minimum energy requirement. Firstly, the occurrence of so-called pinch zones will be systematically described. These are sections of the column in which at minimum reflux an infinite number of separation stages would be necessary. Then exact and approximating solutions of the problems both for ideal and for nonideal mixtures will be discussed. For ideal mixtures a rapid calculation is possible using the well-known Underwood equations, which can also be applied to complex columns (e.g., several feeds and side products, side stream strippers and enrichers). However, strongly nonideal multicomponent mixtures still require time-consuming simulations of columns having large numbers of plates. In such cases serious convergence problems must often be reckoned with. Recent developments aim at avoiding column simulations and at calculating pinch points directly.

  17. Theoretical calculations and vibrational potential energy surface of 4-silaspiro(3,3)heptane

    SciTech Connect

    Ocola, Esther J.; Medders, Cross; Laane, Jaan; Meinander, Niklas

    2014-04-28

    Theoretical computations have been carried out on 4-silaspiro(3,3)heptane (SSH) in order to calculate its molecular structure and conformational energies. The molecule has two puckered four-membered rings with dihedral angles of 34.2° and a tilt angle of 9.4° between the two rings. Energy calculations were carried out for different conformations of SSH. These results allowed the generation of a two-dimensional ring-puckering potential energy surface (PES) of the form V = a(x{sub 1}{sup 4} + x{sub 2}{sup 4}) – b(x{sub 1}{sup 2} + x{sub 2}{sup 2}) + cx{sub 1}{sup 2}x{sub 2}{sup 2}, where x{sub 1} and x{sub 2} are the ring-puckering coordinates for the two rings. The presence of sufficiently high potential energy barriers prevents the molecule from undergoing pseudorotation. The quantum states, wave functions, and predicted spectra resulting from the PESs were calculated.

  18. Discovery and optimization of triazine derivatives as ROCK1 inhibitors: molecular docking, molecular dynamics simulations and free energy calculations.

    PubMed

    Shen, Mingyun; Zhou, Shunye; Li, Youyong; Pan, Peichen; Zhang, Liling; Hou, Tingjun

    2013-03-01

    Rho-associated protein kinases (ROCK1 and ROCK2) are promising targets for a number of diseases, including cardiovascular disorders, nervous system diseases, cancers, etc. Recently, we have successfully identified a ROCK1 inhibitor (1) with the triazine core. In order to gain a deeper insight into the microscopic binding of this inhibitor with ROCK1 and design derivatives with improved potency, the interactions between ROCK1 and a series of triazine/pyrimidine-based inhibitors were studied by using an integrated computational protocol that combines molecular docking, molecular dynamics (MD) simulations, binding free energy calculations, and binding energy decomposition analysis. First, three docking protocols, rigid receptor docking, induced fit docking, QM-polarized ligand docking, were used to determine the binding modes of the studied inhibitors in the active site of ROCK1. The results illustrate that rigid receptor docking achieves the best performance to rank the binding affinities of the studied inhibitors. Then, based on the predicted structures from molecular docking, MD simulations and MM/GBSA free energy calculations were employed to determine the dynamic binding process and compare the binding modes of the inhibitors with different activities. The binding free energies predicted by MM/GBSA are in good agreement with the experimental bioactivities, and the analysis of the individual energy terms suggests that the van der Waals interaction is the major driving force for ligand binding. In addition, the residue-inhibitor interaction spectra were obtained by the MM/GBSA free energy decomposition analysis, and the important residues for achieving strong binding were highlighted, which affords important guidance for the rational design of novel ROCK inhibitors. Finally, a variety of derivatives of inhibitor 1 were designed and four of them showed promising potency according to the predictions. We expect that our study can provide significant insight into the

  19. Neutron Unfolding Code System for Calculating Neutron Flux Spectra from Activation Data of Dosimeter Foils.

    1982-04-30

    Version 00 As a part of the measurement and analysis plan for the Dosimetry Experiment at the "JOYO" experimental fast reactor, neutron flux spectral analysis is performed using the NEUPAC (Neutron Unfolding Code Package) code system. NEUPAC calculates the neutron flux spectra and other integral quantities from the activation data of the dosimeter foils.

  20. Office Occupations--Clerical--Calculators. Kit No. 75. Instructor's Manual [and] Student Learning Activity Guide.

    ERIC Educational Resources Information Center

    Stewart, Ada

    An instructor's manual and student activity guide on the clerical use of calculators are provided in this set of prevocational education materials which focuses on the vocational area of office occupations. (This set of materials is one of ninety-two prevocational education sets arranged around a cluster of seven vocational offerings: agriculture,…

  1. Operational Control Procedures for the Activated Sludge Process, Part III-A: Calculation Procedures.

    ERIC Educational Resources Information Center

    West, Alfred W.

    This is the second in a series of documents developed by the National Training and Operational Technology Center describing operational control procedures for the activated sludge process used in wastewater treatment. This document deals exclusively with the calculation procedures, including simplified mixing formulas, aeration tank…

  2. Methods for calculating dietary energy density in a nationally representative sample.

    PubMed

    Vernarelli, Jacqueline A; Mitchell, Diane C; Rolls, Barbara J; Hartman, Terryl J

    2013-01-01

    There has been a growing interest in examining dietary energy density (ED, kcal/g) as it relates to various health outcomes. Consuming a diet low in ED has been recommended in the 2010 Dietary Guidelines, as well as by other agencies, as a dietary approach for disease prevention. Translating this recommendation into practice; however, is difficult. Currently there is no standardized method for calculating dietary ED; as dietary ED can be calculated with foods alone, or with a combination of foods and beverages. Certain items may be defined as either a food or a beverage (e.g., meal replacement shakes) and require special attention. National survey data are an excellent resource for evaluating factors that are important to dietary ED calculation. The National Health and Nutrition Examination Survey (NHANES) nutrient and food database does not include an ED variable, thus researchers must independently calculate ED. The objective of this study was to provide information that will inform the selection of a standardized ED calculation method by comparing and contrasting methods for ED calculation. The present study evaluates all consumed items and defines foods and beverages based on both USDA food codes and how the item was consumed. Results are presented as mean EDs for the different calculation methods stratified by population demographics (e.g. age, sex). Using United State Department of Agriculture (USDA) food codes in the 2005-2008 NHANES, a standardized method for calculating dietary ED can be derived. This method can then be adapted by other researchers for consistency across studies.

  3. Methods for calculating dietary energy density in a nationally representative sample

    PubMed Central

    Vernarelli, Jacqueline A.; Mitchell, Diane C.; Rolls, Barbara J.; Hartman, Terryl J.

    2013-01-01

    There has been a growing interest in examining dietary energy density (ED, kcal/g) as it relates to various health outcomes. Consuming a diet low in ED has been recommended in the 2010 Dietary Guidelines, as well as by other agencies, as a dietary approach for disease prevention. Translating this recommendation into practice; however, is difficult. Currently there is no standardized method for calculating dietary ED; as dietary ED can be calculated with foods alone, or with a combination of foods and beverages. Certain items may be defined as either a food or a beverage (e.g., meal replacement shakes) and require special attention. National survey data are an excellent resource for evaluating factors that are important to dietary ED calculation. The National Health and Nutrition Examination Survey (NHANES) nutrient and food database does not include an ED variable, thus researchers must independently calculate ED. The objective of this study was to provide information that will inform the selection of a standardized ED calculation method by comparing and contrasting methods for ED calculation. The present study evaluates all consumed items and defines foods and beverages based on both USDA food codes and how the item was consumed. Results are presented as mean EDs for the different calculation methods stratified by population demographics (e.g. age, sex). Using United State Department of Agriculture (USDA) food codes in the 2005–2008 NHANES, a standardized method for calculating dietary ED can be derived. This method can then be adapted by other researchers for consistency across studies. PMID:24432201

  4. Calculating solution redox free energies with ab initio quantum mechanical/molecular mechanical minimum free energy path method

    NASA Astrophysics Data System (ADS)

    Zeng, Xiancheng; Hu, Hao; Hu, Xiangqian; Yang, Weitao

    2009-04-01

    A quantum mechanical/molecular mechanical minimum free energy path (QM/MM-MFEP) method was developed to calculate the redox free energies of large systems in solution with greatly enhanced efficiency for conformation sampling. The QM/MM-MFEP method describes the thermodynamics of a system on the potential of mean force surface of the solute degrees of freedom. The molecular dynamics (MD) sampling is only carried out with the QM subsystem fixed. It thus avoids "on-the-fly" QM calculations and thus overcomes the high computational cost in the direct QM/MM MD sampling. In the applications to two metal complexes in aqueous solution, the new QM/MM-MFEP method yielded redox free energies in good agreement with those calculated from the direct QM/MM MD method. Two larger biologically important redox molecules, lumichrome and riboflavin, were further investigated to demonstrate the efficiency of the method. The enhanced efficiency and uncompromised accuracy are especially significant for biochemical systems. The QM/MM-MFEP method thus provides an efficient approach to free energy simulation of complex electron transfer reactions.

  5. Calculating solution redox free energies with ab initio quantum mechanical/molecular mechanical minimum free energy path method

    SciTech Connect

    Zeng Xiancheng; Hu Hao; Hu Xiangqian; Yang Weitao

    2009-04-28

    A quantum mechanical/molecular mechanical minimum free energy path (QM/MM-MFEP) method was developed to calculate the redox free energies of large systems in solution with greatly enhanced efficiency for conformation sampling. The QM/MM-MFEP method describes the thermodynamics of a system on the potential of mean force surface of the solute degrees of freedom. The molecular dynamics (MD) sampling is only carried out with the QM subsystem fixed. It thus avoids 'on-the-fly' QM calculations and thus overcomes the high computational cost in the direct QM/MM MD sampling. In the applications to two metal complexes in aqueous solution, the new QM/MM-MFEP method yielded redox free energies in good agreement with those calculated from the direct QM/MM MD method. Two larger biologically important redox molecules, lumichrome and riboflavin, were further investigated to demonstrate the efficiency of the method. The enhanced efficiency and uncompromised accuracy are especially significant for biochemical systems. The QM/MM-MFEP method thus provides an efficient approach to free energy simulation of complex electron transfer reactions.

  6. Long-lived activation products in TRIGA Mark II research reactor concrete shield: calculation and experiment

    NASA Astrophysics Data System (ADS)

    Žagar, Tomaž; Božič, Matjaž; Ravnik, Matjaž

    2004-12-01

    In this paper, a process of long-lived activity determination in research reactor concrete shielding is presented. The described process is a combination of experiment and calculations. Samples of original heavy reactor concrete containing mineral barite were irradiated inside the reactor shielding to measure its long-lived induced radioactivity. The most active long-lived (γ emitting) radioactive nuclides in the concrete were found to be 133Ba, 60Co and 152Eu. Neutron flux, activation rates and concrete activity were calculated for actual shield geometry for different irradiation and cooling times using TORT and ORIGEN codes. Experimental results of flux and activity measurements showed good agreement with the results of calculations. Volume of activated concrete waste after reactor decommissioning was estimated for particular case of Jožef Stefan Institute TRIGA reactor. It was observed that the clearance levels of some important long-lived isotopes typical for barite concrete (e.g. 133Ba, 41Ca) are not included in the IAEA and EU basic safety standards.

  7. Origin of activation energy in a superionic conductor.

    PubMed

    Kamishima, O; Kawamura, K; Hattori, T; Kawamura, J

    2011-06-01

    The characteristics of cation diffusion with many-body effects are discussed using Ag β-alumina as an example of a superionic conductor. Polarized Raman spectra of Ag β-alumina have been measured at room temperature. The interatomic potentials were determined by a non-linear least square fitting between the phonon eigenvalues from the Raman observations and a dynamical matrix calculation based on a rigid-ion model. The obtained potential parameters for the model crystal of Ag β-alumina successfully reproduce the macroscopic properties with respect to the heat capacity, isothermal compressibility and self-diffusion constant. A molecular dynamics (MD) calculation has been carried out using the model crystal of Ag β-alumina to understand the many-body effects for the fast ionic diffusion. It was found that the Ag-Ag repulsion by excess Ag defects significantly reduced the cost of the energy difference of the occupancy between the stable and metastable sites. It is possible for the system to take various configurations of the mobile ions through defects easily, and then the fast ionic diffusion will appear. On the other hand, the Ag-Ag repulsion changes the dynamics of the Ag ions from a random hopping to a cooperative motion. In the cooperative motion, the ionic transport becomes difficult due to the additional energy required for the structural relaxation of the surrounding Ag ions. We propose a new insight into the superionic conduction, that is, the activation energy for the ionic transport is composed of two kinds of elements: a 'static' activation energy and a 'dynamic' one. The static activation energy is the cost of the averaged energy difference in the various structural configurations in the equilibrium state. The dynamic activation energy is the additional energy required for the structural relaxation induced by the jump process.

  8. Efficient first-principles calculation of the quantum kinetic energy and momentum distribution of nuclei.

    PubMed

    Ceriotti, Michele; Manolopoulos, David E

    2012-09-01

    Light nuclei at room temperature and below exhibit a kinetic energy which significantly deviates from the predictions of classical statistical mechanics. This quantum kinetic energy is responsible for a wide variety of isotope effects of interest in fields ranging from chemistry to climatology. It also furnishes the second moment of the nuclear momentum distribution, which contains subtle information about the chemical environment and has recently become accessible to deep inelastic neutron scattering experiments. Here, we show how, by combining imaginary time path integral dynamics with a carefully designed generalized Langevin equation, it is possible to dramatically reduce the expense of computing the quantum kinetic energy. We also introduce a transient anisotropic Gaussian approximation to the nuclear momentum distribution which can be calculated with negligible additional effort. As an example, we evaluate the structural properties, the quantum kinetic energy, and the nuclear momentum distribution for a first-principles simulation of liquid water.

  9. Free Energy Calculations using a Swarm-Enhanced Sampling Molecular Dynamics Approach.

    PubMed

    Burusco, Kepa K; Bruce, Neil J; Alibay, Irfan; Bryce, Richard A

    2015-10-26

    Free energy simulations are an established computational tool in modelling chemical change in the condensed phase. However, sampling of kinetically distinct substates remains a challenge to these approaches. As a route to addressing this, we link the methods of thermodynamic integration (TI) and swarm-enhanced sampling molecular dynamics (sesMD), where simulation replicas interact cooperatively to aid transitions over energy barriers. We illustrate the approach by using alchemical alkane transformations in solution, comparing them with the multiple independent trajectory TI (IT-TI) method. Free energy changes for transitions computed by using IT-TI grew increasingly inaccurate as the intramolecular barrier was heightened. By contrast, swarm-enhanced sampling TI (sesTI) calculations showed clear improvements in sampling efficiency, leading to more accurate computed free energy differences, even in the case of the highest barrier height. The sesTI approach, therefore, has potential in addressing chemical change in systems where conformations exist in slow exchange.

  10. Efficient first-principles calculation of the quantum kinetic energy and momentum distribution of nuclei.

    PubMed

    Ceriotti, Michele; Manolopoulos, David E

    2012-09-01

    Light nuclei at room temperature and below exhibit a kinetic energy which significantly deviates from the predictions of classical statistical mechanics. This quantum kinetic energy is responsible for a wide variety of isotope effects of interest in fields ranging from chemistry to climatology. It also furnishes the second moment of the nuclear momentum distribution, which contains subtle information about the chemical environment and has recently become accessible to deep inelastic neutron scattering experiments. Here, we show how, by combining imaginary time path integral dynamics with a carefully designed generalized Langevin equation, it is possible to dramatically reduce the expense of computing the quantum kinetic energy. We also introduce a transient anisotropic Gaussian approximation to the nuclear momentum distribution which can be calculated with negligible additional effort. As an example, we evaluate the structural properties, the quantum kinetic energy, and the nuclear momentum distribution for a first-principles simulation of liquid water. PMID:23005275

  11. Effects of activation energy and activation volume on the temperature-dependent viscosity of water.

    PubMed

    Kwang-Hua, Chu Rainer

    2016-08-01

    Water transport in a leaf is vulnerable to viscosity-induced changes. Recent research has suggested that these changes may be partially due to variation at the molecular scale, e.g., regulations via aquaporins, that induce reductions in leaf hydraulic conductance. What are the quantitative as well as qualitative changes in temperature-dependent viscosity due to the role of aquaporins in tuning activation energy and activation volume? Using the transition-state approach as well as the boundary perturbation method, we investigate temperature-dependent viscosity tuned by activation energy and activation volume. To validate our approach, we compare our numerical results with previous temperature-dependent viscosity measurements. The rather good fit between our calculations and measurements confirms our present approach. We have obtained critical parameters for the temperature-dependent (shear) viscosity of water that might be relevant to the increasing and reducing of leaf hydraulic conductance. These parameters are sensitive to temperature, activation energy, and activation volume. Once the activation energy increases, the (shear) viscosity of water increases. Our results also show that as the activation volume increases (say, 10^{-23}m^{3}), the (shear) viscosity of water decreases significantly and the latter induces the enhancing of leaf hydraulic conductance. Within the room-temperature regime, a small increase in the activation energy will increase the water viscosity or reduce the leaf hydraulic conductance. Our approach and results can be applied to diverse plant or leaf attributes. PMID:27627349

  12. Effects of activation energy and activation volume on the temperature-dependent viscosity of water.

    PubMed

    Kwang-Hua, Chu Rainer

    2016-08-01

    Water transport in a leaf is vulnerable to viscosity-induced changes. Recent research has suggested that these changes may be partially due to variation at the molecular scale, e.g., regulations via aquaporins, that induce reductions in leaf hydraulic conductance. What are the quantitative as well as qualitative changes in temperature-dependent viscosity due to the role of aquaporins in tuning activation energy and activation volume? Using the transition-state approach as well as the boundary perturbation method, we investigate temperature-dependent viscosity tuned by activation energy and activation volume. To validate our approach, we compare our numerical results with previous temperature-dependent viscosity measurements. The rather good fit between our calculations and measurements confirms our present approach. We have obtained critical parameters for the temperature-dependent (shear) viscosity of water that might be relevant to the increasing and reducing of leaf hydraulic conductance. These parameters are sensitive to temperature, activation energy, and activation volume. Once the activation energy increases, the (shear) viscosity of water increases. Our results also show that as the activation volume increases (say, 10^{-23}m^{3}), the (shear) viscosity of water decreases significantly and the latter induces the enhancing of leaf hydraulic conductance. Within the room-temperature regime, a small increase in the activation energy will increase the water viscosity or reduce the leaf hydraulic conductance. Our approach and results can be applied to diverse plant or leaf attributes.

  13. Effects of activation energy and activation volume on the temperature-dependent viscosity of water

    NASA Astrophysics Data System (ADS)

    Kwang-Hua, Chu Rainer

    2016-08-01

    Water transport in a leaf is vulnerable to viscosity-induced changes. Recent research has suggested that these changes may be partially due to variation at the molecular scale, e.g., regulations via aquaporins, that induce reductions in leaf hydraulic conductance. What are the quantitative as well as qualitative changes in temperature-dependent viscosity due to the role of aquaporins in tuning activation energy and activation volume? Using the transition-state approach as well as the boundary perturbation method, we investigate temperature-dependent viscosity tuned by activation energy and activation volume. To validate our approach, we compare our numerical results with previous temperature-dependent viscosity measurements. The rather good fit between our calculations and measurements confirms our present approach. We have obtained critical parameters for the temperature-dependent (shear) viscosity of water that might be relevant to the increasing and reducing of leaf hydraulic conductance. These parameters are sensitive to temperature, activation energy, and activation volume. Once the activation energy increases, the (shear) viscosity of water increases. Our results also show that as the activation volume increases (say, 10-23m3 ), the (shear) viscosity of water decreases significantly and the latter induces the enhancing of leaf hydraulic conductance. Within the room-temperature regime, a small increase in the activation energy will increase the water viscosity or reduce the leaf hydraulic conductance. Our approach and results can be applied to diverse plant or leaf attributes.

  14. Classical calculation of the equilibrium constants for true bound dimers using complete potential energy surface

    SciTech Connect

    Buryak, Ilya; Vigasin, Andrey A.

    2015-12-21

    The present paper aims at deriving classical expressions which permit calculation of the equilibrium constant for weakly interacting molecular pairs using a complete multidimensional potential energy surface. The latter is often available nowadays as a result of the more and more sophisticated and accurate ab initio calculations. The water dimer formation is considered as an example. It is shown that even in case of a rather strongly bound dimer the suggested expression permits obtaining quite reliable estimate for the equilibrium constant. The reliability of our obtained water dimer equilibrium constant is briefly discussed by comparison with the available data based on experimental observations, quantum calculations, and the use of RRHO approximation, provided the latter is restricted to formation of true bound states only.

  15. Precise calculations in simulations of the interaction of low energy neutrons with nano-dispersed media

    NASA Astrophysics Data System (ADS)

    Artem'ev, V. A.; Nezvanov, A. Yu.; Nesvizhevsky, V. V.

    2016-01-01

    We discuss properties of the interaction of slow neutrons with nano-dispersed media and their application for neutron reflectors. In order to increase the accuracy of model simulation of the interaction of neutrons with nanopowders, we perform precise quantum mechanical calculation of potential scattering of neutrons on single nanoparticles using the method of phase functions. We compare results of precise calculations with those performed within first Born approximation for nanodiamonds with the radius of 2-5 nm and for neutron energies 3 × 10-7-10-3 eV. Born approximation overestimates the probability of scattering to large angles, while the accuracy of evaluation of integral characteristics (cross sections, albedo) is acceptable. Using Monte-Carlo method, we calculate albedo of neutrons from different layers of piled up diamond nanopowder.

  16. GPU-based acceleration of free energy calculations in solid state physics

    NASA Astrophysics Data System (ADS)

    Januszewski, Michał; Ptok, Andrzej; Crivelli, Dawid; Gardas, Bartłomiej

    2015-07-01

    Obtaining a thermodynamically accurate phase diagram through numerical calculations is a computationally expensive problem that is crucially important to understanding the complex phenomena of solid state physics, such as superconductivity. In this work we show how this type of analysis can be significantly accelerated through the use of modern GPUs. We illustrate this with a concrete example of free energy calculation in multi-band iron-based superconductors, known to exhibit a superconducting state with oscillating order parameter (OP). Our approach can also be used for classical BCS-type superconductors. With a customized algorithm and compiler tuning we are able to achieve a 19×speedup compared to the CPU (119×compared to a single CPU core), reducing calculation time from minutes to mere seconds, enabling the analysis of larger systems and the elimination of finite size effects.

  17. Classical calculation of the equilibrium constants for true bound dimers using complete potential energy surface

    NASA Astrophysics Data System (ADS)

    Buryak, Ilya; Vigasin, Andrey A.

    2015-12-01

    The present paper aims at deriving classical expressions which permit calculation of the equilibrium constant for weakly interacting molecular pairs using a complete multidimensional potential energy surface. The latter is often available nowadays as a result of the more and more sophisticated and accurate ab initio calculations. The water dimer formation is considered as an example. It is shown that even in case of a rather strongly bound dimer the suggested expression permits obtaining quite reliable estimate for the equilibrium constant. The reliability of our obtained water dimer equilibrium constant is briefly discussed by comparison with the available data based on experimental observations, quantum calculations, and the use of RRHO approximation, provided the latter is restricted to formation of true bound states only.

  18. Classical calculation of the equilibrium constants for true bound dimers using complete potential energy surface.

    PubMed

    Buryak, Ilya; Vigasin, Andrey A

    2015-12-21

    The present paper aims at deriving classical expressions which permit calculation of the equilibrium constant for weakly interacting molecular pairs using a complete multidimensional potential energy surface. The latter is often available nowadays as a result of the more and more sophisticated and accurate ab initio calculations. The water dimer formation is considered as an example. It is shown that even in case of a rather strongly bound dimer the suggested expression permits obtaining quite reliable estimate for the equilibrium constant. The reliability of our obtained water dimer equilibrium constant is briefly discussed by comparison with the available data based on experimental observations, quantum calculations, and the use of RRHO approximation, provided the latter is restricted to formation of true bound states only.

  19. Calculation of positron binding energies using the generalized any particle propagator theory

    SciTech Connect

    Romero, Jonathan; Charry, Jorge A.; Flores-Moreno, Roberto; Varella, Márcio T. do N.; Reyes, Andrés

    2014-09-21

    We recently extended the electron propagator theory to any type of quantum species based in the framework of the Any-Particle Molecular Orbital (APMO) approach [J. Romero, E. Posada, R. Flores-Moreno, and A. Reyes, J. Chem. Phys. 137, 074105 (2012)]. The generalized any particle molecular orbital propagator theory (APMO/PT) was implemented in its quasiparticle second order version in the LOWDIN code and was applied to calculate nuclear quantum effects in electron binding energies and proton binding energies in molecular systems [M. Díaz-Tinoco, J. Romero, J. V. Ortiz, A. Reyes, and R. Flores-Moreno, J. Chem. Phys. 138, 194108 (2013)]. In this work, we present the derivation of third order quasiparticle APMO/PT methods and we apply them to calculate positron binding energies (PBEs) of atoms and molecules. We calculated the PBEs of anions and some diatomic molecules using the second order, third order, and renormalized third order quasiparticle APMO/PT approaches and compared our results with those previously calculated employing configuration interaction (CI), explicitly correlated and quantum Montecarlo methodologies. We found that renormalized APMO/PT methods can achieve accuracies of ∼0.35 eV for anionic systems, compared to Full-CI results, and provide a quantitative description of positron binding to anionic and highly polar species. Third order APMO/PT approaches display considerable potential to study positron binding to large molecules because of the fifth power scaling with respect to the number of basis sets. In this regard, we present additional PBE calculations of some small polar organic molecules, amino acids and DNA nucleobases. We complement our numerical assessment with formal and numerical analyses of the treatment of electron-positron correlation within the quasiparticle propagator approach.

  20. Calculation of positron binding energies using the generalized any particle propagator theory.

    PubMed

    Romero, Jonathan; Charry, Jorge A; Flores-Moreno, Roberto; Varella, Márcio T do N; Reyes, Andrés

    2014-09-21

    We recently extended the electron propagator theory to any type of quantum species based in the framework of the Any-Particle Molecular Orbital (APMO) approach [J. Romero, E. Posada, R. Flores-Moreno, and A. Reyes, J. Chem. Phys. 137, 074105 (2012)]. The generalized any particle molecular orbital propagator theory (APMO/PT) was implemented in its quasiparticle second order version in the LOWDIN code and was applied to calculate nuclear quantum effects in electron binding energies and proton binding energies in molecular systems [M. Díaz-Tinoco, J. Romero, J. V. Ortiz, A. Reyes, and R. Flores-Moreno, J. Chem. Phys. 138, 194108 (2013)]. In this work, we present the derivation of third order quasiparticle APMO/PT methods and we apply them to calculate positron binding energies (PBEs) of atoms and molecules. We calculated the PBEs of anions and some diatomic molecules using the second order, third order, and renormalized third order quasiparticle APMO/PT approaches and compared our results with those previously calculated employing configuration interaction (CI), explicitly correlated and quantum Montecarlo methodologies. We found that renormalized APMO/PT methods can achieve accuracies of ~0.35 eV for anionic systems, compared to Full-CI results, and provide a quantitative description of positron binding to anionic and highly polar species. Third order APMO/PT approaches display considerable potential to study positron binding to large molecules because of the fifth power scaling with respect to the number of basis sets. In this regard, we present additional PBE calculations of some small polar organic molecules, amino acids and DNA nucleobases. We complement our numerical assessment with formal and numerical analyses of the treatment of electron-positron correlation within the quasiparticle propagator approach.

  1. Calculation of positron binding energies using the generalized any particle propagator theory

    NASA Astrophysics Data System (ADS)

    Romero, Jonathan; Charry, Jorge A.; Flores-Moreno, Roberto; Varella, Márcio T. do N.; Reyes, Andrés

    2014-09-01

    We recently extended the electron propagator theory to any type of quantum species based in the framework of the Any-Particle Molecular Orbital (APMO) approach [J. Romero, E. Posada, R. Flores-Moreno, and A. Reyes, J. Chem. Phys. 137, 074105 (2012)]. The generalized any particle molecular orbital propagator theory (APMO/PT) was implemented in its quasiparticle second order version in the LOWDIN code and was applied to calculate nuclear quantum effects in electron binding energies and proton binding energies in molecular systems [M. Díaz-Tinoco, J. Romero, J. V. Ortiz, A. Reyes, and R. Flores-Moreno, J. Chem. Phys. 138, 194108 (2013)]. In this work, we present the derivation of third order quasiparticle APMO/PT methods and we apply them to calculate positron binding energies (PBEs) of atoms and molecules. We calculated the PBEs of anions and some diatomic molecules using the second order, third order, and renormalized third order quasiparticle APMO/PT approaches and compared our results with those previously calculated employing configuration interaction (CI), explicitly correlated and quantum Montecarlo methodologies. We found that renormalized APMO/PT methods can achieve accuracies of ˜0.35 eV for anionic systems, compared to Full-CI results, and provide a quantitative description of positron binding to anionic and highly polar species. Third order APMO/PT approaches display considerable potential to study positron binding to large molecules because of the fifth power scaling with respect to the number of basis sets. In this regard, we present additional PBE calculations of some small polar organic molecules, amino acids and DNA nucleobases. We complement our numerical assessment with formal and numerical analyses of the treatment of electron-positron correlation within the quasiparticle propagator approach.

  2. Calculating interaction energies in transition metal complexes with local electron correlation methods

    NASA Astrophysics Data System (ADS)

    Hill, J. Grant; Platts, James A.

    2008-10-01

    The results of density fitting and local approximations applied to the calculation of transition metal-ligand binding energies using second order Møller-Plesset perturbation theory are reported. This procedure accurately reproduces counterpoise corrected binding energies from the canonical method for a range of test complexes. While counterpoise corrections for basis set superposition error are generally small, this procedure can be time consuming, and in some cases gives rise to unphysical dissociation of complexes. In circumventing this correction, a local treatment of electron correlation offers major efficiency savings with little loss of accuracy. The use of density fitting for the underlying Hartree-Fock calculations is also tested for sample Ru complexes, leading to further efficiency gains but essentially no loss in accuracy.

  3. Calculating alpha Eigenvalues in a Continuous-Energy Infinite Medium with Monte Carlo

    SciTech Connect

    Betzler, Benjamin R.; Kiedrowski, Brian C.; Brown, Forrest B.; Martin, William R.

    2012-09-04

    The {alpha} eigenvalue has implications for time-dependent problems where the system is sub- or supercritical. We present methods and results from calculating the {alpha}-eigenvalue spectrum for a continuous-energy infinite medium with a simplified Monte Carlo transport code. We formulate the {alpha}-eigenvalue problem, detail the Monte Carlo code physics, and provide verification and results. We have a method for calculating the {alpha}-eigenvalue spectrum in a continuous-energy infinite-medium. The continuous-time Markov process described by the transition rate matrix provides a way of obtaining the {alpha}-eigenvalue spectrum and kinetic modes. These are useful for the approximation of the time dependence of the system.

  4. Calculated dipole moment and energy in collision of a hydrogen molecule and a hydrogen atom

    NASA Technical Reports Server (NTRS)

    Patch, R. W.

    1973-01-01

    Calculations were carried out using three Slater-type 1s orbitals in the orthogonalized valencebond theory of McWeeny. Each orbital exponent was optimized, the H2 internuclear distance was varied from 7.416 x 10 to the -11th power to 7.673 x 10 to the -11th power m (1.401 to 1.450 bohrs). The intermolecular distance was varied from 1 to 4 bohrs (0.5292 to 2.117 x 10 to the 10th power). Linear, scalene, and isosceles configurations were used. A weighted average of the interaction energies was taken for each intermolecular distance. Although energies are tabulated, the principal purpose was to calculate the electric dipole moment and its derivative with respect to H2 internuclear distance.

  5. S-matrix Calculations of Energy Levels of the Lithium Isoelectronic Sequence

    SciTech Connect

    sapirstein, J; Cheng, K T

    2010-11-02

    A QED approach to the calculation of the spectra of the lithium isoelectronic sequence is implemented. A modified Furry representation based on the Kohn-Sham potential is used to evaluate all one- and two-photon diagrams with the exception of the two-loop Lamb shift. Three-photon diagrams are estimated with Hamiltonian methods. After incorporating recent calculations of the two-loop Lamb shift and recoil corrections a comprehensive tabulation of the 2s, 2p{sub 1/2} and 2p{sub 3/2} energy levels as well as the 2s - 2p{sub 1/2} and 2s - 2p{sub 3/2} transition energies for Z = 10 - 100 is presented.

  6. S-matrix calculations of energy levels of the lithium isoelectronic sequence

    NASA Astrophysics Data System (ADS)

    Sapirstein, J.; Cheng, K. T.

    2012-06-01

    A QED approach to the calculation of the spectra of the lithium isoelectronic sequence is implemented. A modified Furry representation based on the Kohn-Sham potential is used to evaluate all one- and two-photon diagrams with the exception of the two-loop Lamb shift. Three-photon diagrams are estimated with Hamiltonian methods. After incorporating recent calculations of the two-loop Lamb shift and recoil corrections a comprehensive tabulation of the 2s, 2p1/2 and 2p3/2 energy levels as well as the 2s-2p1/2 and 2s-2p3/2 transition energies for Z=10-100 is presented.

  7. S-matrix calculations of energy levels of the lithium isoelectronic sequence

    NASA Astrophysics Data System (ADS)

    Sapirstein, J.; Cheng, K. T.

    2011-01-01

    A QED approach to the calculation of the spectra of the lithium isoelectronic sequence is implemented. A modified Furry representation based on the Kohn-Sham potential is used to evaluate all one- and two-photon diagrams with the exception of the two-loop Lamb shift. Three-photon diagrams are estimated with Hamiltonian methods. After incorporating recent calculations of the two-loop Lamb shift and recoil corrections, a comprehensive tabulation of the 2s, 2p1/2, and 2p3/2 energy levels as well as the 2s-2p1/2 and 2s-2p3/2 transition energies for Z=10-100 is presented.

  8. Structure-activity correlations for organophosphorus ester anticholinesterases. Part 2: CNDO/2 calculations applied to ester hydrolysis rates

    NASA Technical Reports Server (NTRS)

    Johnson, H.; Kenley, R. A.; Rynard, C.; Golub, M. A.

    1984-01-01

    Quantitative structure-activity relationships are presented for the hydrolysis of organophosphorus esters, RR'P(O)X, where R and R' are alkyl and/or alkoxy groups and X is fluorine, chlorine or a phenoxy group. CNDO/2 calculations provide values for molecular parameters that correlate with alkaline hydrolysis rates. For each subset of esters with the same leaving group, X, the CNDO-derived net atomic charge at the central phosphorus atom correlates well with the alkaline hydrolysis rate constants. For the whole set of esters with different leaving groups, equations are derived that relate charge, orbital energy and bond order to the hydrolysis rate constants.

  9. Linearity condition for orbital energies in density functional theory (V): Extension to excited state calculations

    NASA Astrophysics Data System (ADS)

    Imamura, Yutaka; Suzuki, Kensei; Iizuka, Takeshi; Nakai, Hiromi

    2015-01-01

    A new scheme is proposed for constructing an orbital-specific (OS) exchange-correlation functional that satisfies multiple linearity conditions for orbital energies (LCOEs). The Hartree-Fock exchange portions in the OS exchange-correlation functional, based on a multiply range-separated functional, are set so as to satisfy the multiple LCOEs. The current scheme has also been extended to calculations of core, valence, and Rydberg excitations. Numerical assessments on ionization potentials, electron affinities and excitation energies have confirmed accurate descriptions of core, valence, and Rydberg orbitals by the OS hybrid functional.

  10. Microscopic calculation of interacting boson model parameters by potential-energy surface mapping

    SciTech Connect

    Bentley, I.; Frauendorf, S.

    2011-06-15

    A coherent state technique is used to generate an interacting boson model (IBM) Hamiltonian energy surface which is adjusted to match a mean-field energy surface. This technique allows the calculation of IBM Hamiltonian parameters, prediction of properties of low-lying collective states, as well as the generation of probability distributions of various shapes in the ground state of transitional nuclei, the last two of which are of astrophysical interest. The results for krypton, molybdenum, palladium, cadmium, gadolinium, dysprosium, and erbium nuclei are compared with experiment.

  11. USING TIME VARIANT VOLTAGE TO CALCULATE ENERGY CONSUMPTION AND POWER USE OF BUILDING SYSTEMS

    SciTech Connect

    Makhmalbaf, Atefe; Augenbroe , Godfried

    2015-12-09

    Buildings are the main consumers of electricity across the world. However, in the research and studies related to building performance assessment, the focus has been on evaluating the energy efficiency of buildings whereas the instantaneous power efficiency has been overlooked as an important aspect of total energy consumption. As a result, we never developed adequate models that capture both thermal and electrical characteristics (e.g., voltage) of building systems to assess the impact of variations in the power system and emerging technologies of the smart grid on buildings energy and power performance and vice versa. This paper argues that the power performance of buildings as a function of electrical parameters should be evaluated in addition to systems’ mechanical and thermal behavior. The main advantage of capturing electrical behavior of building load is to better understand instantaneous power consumption and more importantly to control it. Voltage is one of the electrical parameters that can be used to describe load. Hence, voltage dependent power models are constructed in this work and they are coupled with existing thermal energy models. Lack of models that describe electrical behavior of systems also adds to the uncertainty of energy consumption calculations carried out in building energy simulation tools such as EnergyPlus, a common building energy modeling and simulation tool. To integrate voltage-dependent power models with thermal models, the thermal cycle (operation mode) of each system was fed into the voltage-based electrical model. Energy consumption of systems used in this study were simulated using EnergyPlus. Simulated results were then compared with estimated and measured power data. The mean square error (MSE) between simulated, estimated, and measured values were calculated. Results indicate that estimated power has lower MSE when compared with measured data than simulated results. Results discussed in this paper will illustrate the

  12. Free molecular collision cross section calculation methods for nanoparticles and complex ions with energy accommodation

    SciTech Connect

    Larriba, Carlos Hogan, Christopher J.

    2013-10-15

    The structures of nanoparticles, macromolecules, and molecular clusters in gas phase environments are often studied via measurement of collision cross sections. To directly compare structure models to measurements, it is hence necessary to have computational techniques available to calculate the collision cross sections of structural models under conditions matching measurements. However, presently available collision cross section methods contain the underlying assumption that collision between gas molecules and structures are completely elastic (gas molecule translational energy conserving) and specular, while experimental evidence suggests that in the most commonly used background gases for measurements, air and molecular nitrogen, gas molecule reemission is largely inelastic (with exchange of energy between vibrational, rotational, and translational modes) and should be treated as diffuse in computations with fixed structural models. In this work, we describe computational techniques to predict the free molecular collision cross sections for fixed structural models of gas phase entities where inelastic and non-specular gas molecule reemission rules can be invoked, and the long range ion-induced dipole (polarization) potential between gas molecules and a charged entity can be considered. Specifically, two calculation procedures are described detail: a diffuse hard sphere scattering (DHSS) method, in which structures are modeled as hard spheres and collision cross sections are calculated for rectilinear trajectories of gas molecules, and a diffuse trajectory method (DTM), in which the assumption of rectilinear trajectories is relaxed and the ion-induced dipole potential is considered. Collision cross section calculations using the DHSS and DTM methods are performed on spheres, models of quasifractal aggregates of varying fractal dimension, and fullerene like structures. Techniques to accelerate DTM calculations by assessing the contribution of grazing gas

  13. Accurate potential energy curve of the LiH{sup +} molecule calculated with explicitly correlated Gaussian functions

    SciTech Connect

    Tung, Wei-Cheng; Adamowicz, Ludwik

    2014-03-28

    Very accurate calculations of the ground-state potential energy curve (PEC) of the LiH{sup +} ion performed with all-electron explicitly correlated Gaussian functions with shifted centers are presented. The variational method is employed. The calculations involve optimization of nonlinear exponential parameters of the Gaussians performed with the aid of the analytical first derivatives of the energy determined with respect to the parameters. The diagonal adiabatic correction is also calculated for each PEC point. The PEC is then used to calculate the vibrational energies of the system. In that calculation, the non-adiabatic effects are accounted for by using an effective vibrational mass obtained by the minimization of the difference between the vibrational energies obtained from the calculations where the Born-Oppenheimer approximation was not assumed and the results of the present calculations.

  14. DFT calculations on nitrodiborane compounds as new potential high energy materials.

    PubMed

    Abdelmalik, John; Ball, David W

    2010-05-01

    We have used DFT methods to determine the structures and thermochemistry of several nitro-substituted diborane molecules in an attempt to rate their potential as high energy materials. The properties of nitrodiborane, three isomers of dinitrodiborane, trinitrodiborane, and tetranitrodiborane were calculated using the B3LYP density functional method. Our results indicate that the absolute enthalpy of combustion decreases with increasing nitro content, in contrast with other nitro-substituted systems that have been studied previously.

  15. New algorithms for the Vavilov distribution calculation and the corresponding energy loss sampling

    SciTech Connect

    Chibani, O. |

    1998-10-01

    Two new algorithms for the fast calculation of the Vavilov distribution within the interval 0.01 {le} {kappa} {le} 10, where neither the Gaussian approximation nor the Landau distribution may be used, are presented. These algorithms are particularly convenient for the sampling of the corresponding random energy loss. A comparison with the exact Vavilov distribution for the case of protons traversing Al slabs is given.

  16. Use of SCALE Continuous-Energy Monte Carlo Tools for Eigenvalue Sensitivity Coefficient Calculations

    SciTech Connect

    Perfetti, Christopher M; Rearden, Bradley T

    2013-01-01

    The TSUNAMI code within the SCALE code system makes use of eigenvalue sensitivity coefficients for an extensive number of criticality safety applications, such as quantifying the data-induced uncertainty in the eigenvalue of critical systems, assessing the neutronic similarity between different critical systems, and guiding nuclear data adjustment studies. The need to model geometrically complex systems with improved fidelity and the desire to extend TSUNAMI analysis to advanced applications has motivated the development of a methodology for calculating sensitivity coefficients in continuous-energy (CE) Monte Carlo applications. The CLUTCH and Iterated Fission Probability (IFP) eigenvalue sensitivity methods were recently implemented in the CE KENO framework to generate the capability for TSUNAMI-3D to perform eigenvalue sensitivity calculations in continuous-energy applications. This work explores the improvements in accuracy that can be gained in eigenvalue and eigenvalue sensitivity calculations through the use of the SCALE CE KENO and CE TSUNAMI continuous-energy Monte Carlo tools as compared to multigroup tools. The CE KENO and CE TSUNAMI tools were used to analyze two difficult models of critical benchmarks, and produced eigenvalue and eigenvalue sensitivity coefficient results that showed a marked improvement in accuracy. The CLUTCH sensitivity method in particular excelled in terms of efficiency and computational memory requirements.

  17. Automatic GROMACS topology generation and comparisons of force fields for solvation free energy calculations.

    PubMed

    Lundborg, Magnus; Lindahl, Erik

    2015-01-22

    Free energy calculation has long been an important goal for molecular dynamics simulation and force field development, but historically it has been challenged by limited performance, accuracy, and creation of topologies for arbitrary small molecules. This has made it difficult to systematically compare different sets of parameters to improve existing force fields, but in the past few years several authors have developed increasingly automated procedures to generate parameters for force fields such as Amber, CHARMM, and OPLS. Here, we present a new framework that enables fully automated generation of GROMACS topologies for any of these force fields and an automated setup for parallel adaptive optimization of high-throughput free energy calculation by adjusting lambda point placement on the fly. As a small example of this automated pipeline, we have calculated solvation free energies of 50 different small molecules using the GAFF, OPLS-AA, and CGenFF force fields and four different water models, and by including the often neglected polarization costs, we show that the common charge models are somewhat underpolarized.

  18. Weather data for simplified energy calculation methods. Volume IV. United States: WYEC data

    SciTech Connect

    Olsen, A.R.; Moreno, S.; Deringer, J.; Watson, C.R.

    1984-08-01

    The objective of this report is to provide a source of weather data for direct use with a number of simplified energy calculation methods available today. Complete weather data for a number of cities in the United States are provided for use in the following methods: degree hour, modified degree hour, bin, modified bin, and variable degree day. This report contains sets of weather data for 23 cities using Weather Year for Energy Calculations (WYEC) source weather data. Considerable overlap is present in cities (21) covered by both the TRY and WYEC data. The weather data at each city has been summarized in a number of ways to provide differing levels of detail necessary for alternative simplified energy calculation methods. Weather variables summarized include dry bulb and wet bulb temperature, percent relative humidity, humidity ratio, wind speed, percent possible sunshine, percent diffuse solar radiation, total solar radiation on horizontal and vertical surfaces, and solar heat gain through standard DSA glass. Monthly and annual summaries, in some cases by time of day, are available. These summaries are produced in a series of nine computer generated tables.

  19. On the thermodynamics of carbon nanotube single-file water loading: free energy, energy and entropy calculations.

    PubMed

    Garate, Jose Antonio; Perez-Acle, Tomas; Oostenbrink, Chris

    2014-03-21

    Single-file water chains confined in carbon nanotubes have been extensively studied using molecular dynamics simulations. Specifically, the pore loading process of periodic (6,6) and (5,5) single-walled carbon nanotubes was thermodynamically characterized by means of free-energy calculations at every loading state and compared to bulk water employing thermodynamic cycles. Long simulations of each end-state allowed for the partitioning of the free energy into its energetic and entropic components. The calculations revealed that the initial loading states are dominated by entropic (both translational and rotational) components, whereas the latter stages are energetically driven by strong dipolar interactions among the water molecules in the file.

  20. Biasing Potential Replica Exchange Multi-Site λ-Dynamics for Efficient Free Energy Calculations

    PubMed Central

    Armacost, Kira A.; Goh, Garrett B.; Brooks, Charles L.

    2016-01-01

    Traditional free energy calculation methods are well known for their drawbacks in scalability and speed in converging results particularly for calculations with large perturbations. In the present work, we report on the development of biasing potential replica exchange multi-site λ-dynamics (BP-REX MSλD), which is a free energy method that is capable of performing simultaneous alchemical free energy transformations, including perturbations between flexible moieties. BP-REX MSλD and the original MSλD are applied to a series of symmetrical 2,5-benzoquinone derivatives covering a diverse chemical space and range of conformational flexibility. Improved λ-space sampling is observed for the BP-REX MSλD simulations, yielding a 2–5-fold increase in the number of transitions between substituents compared to traditional MSλD. We also demonstrate the efficacy of varying the value of c, the parameter that controls the ruggedness of the landscape mediating the sampling of λ-states, based on the flexibility of the fragment. Finally, we developed a protocol for maximizing the transition frequency between fragments. This protocol reduces the “kinetic barrier” for alchemically transforming fragments by grouping and ordering based on volume. These findings are applied to a challenging test set involving a series of geldanamycin-based inhibitors of heat shock protein 90 (Hsp90). Even though the perturbations span volume changes by as large as 60 Å3, the values for the free energy change achieve an average unsigned error (AUE) of 1.5 kcal/mol relative to experimental Kd measurements with a reasonable correlation (R = 0.56). Our results suggest that the BP-REX MSλD algorithm is a highly efficient and scalable free energy method, which when utilized will enable routine calculations on the order of hundreds of compounds using only a few simulations. PMID:26579773

  1. Internal energy distribution of peptides in electrospray ionization : ESI and collision-induced dissociation spectra calculation.

    PubMed

    Pak, Alireza; Lesage, Denis; Gimbert, Yves; Vékey, Károly; Tabet, Jean-Claude

    2008-04-01

    The internal energy of ions and the timescale play fundamental roles in mass spectrometry. The main objective of this study is to estimate and compare the internal energy distributions of different ions (different nature, degree of freedom 'DOF' and fragmentations) produced in an electrospray source (ESI) of a triple-quadrupole instrument (Quattro I Micromass). These measurements were performed using both the Survival Yield method (as proposed by De Pauw) and the MassKinetics software (kinetic model introduced by Vékey). The internal energy calibration is the preliminary step for ESI and collision-induced dissociation (CID) spectra calculation. meta-Methyl-benzylpyridinium ion and four protonated peptides (YGGFL, LDIFSDF, LDIFSDFR and RLDIFSDF) were produced using an electrospray source. These ions were used as thermometer probe compounds. Cone voltages (V(c)) were linearly correlated with the mean internal energy values () carried by desolvated ions. These mean internal energy values seem to be slightly dependent on the size of the studied ion. ESI mass spectra and CID spectra were then simulated using the MassKinetics software to propose an empirical equation for the mean internal energy () versus cone voltage (V(c)) for different source temperatures (T): < E(int) > = [405 x 10(-6) - 480 x 10(-9) (DOF)] V(c)T + E(therm)(T). In this equation, the E(therm)(T) parameter is the mean internal energy due to the source temperature at 0 V(c).

  2. Comparison of Fixed versus Calculated Activity of Radioiodine for the Treatment of Graves Disease in Adults

    PubMed Central

    Dominguez, Paulette N.; Jimeno, Cecilia A.; Obaldo, Jerry M.; Ogbac, Ruben V.

    2016-01-01

    Background Radioactive iodine as a treatment modality has been shown in several studies to be a safe and effective therapy for Graves disease. However, there is still no uniformity regarding optimal dosing method. The aim of this study is to compare the efficacy of calculated and fixed dosing of radioiodine for the treatment of Graves disease. Methods A hundred twenty-two patients diagnosed with Graves disease were randomized to receive either fixed or calculated dose of radioiodine. Those randomized to fixed activity received either low fixed activity at 9.9 mCi for thyroid gland size <40 g or high fixed activity at 14.9 mCi for thyroid gland size 40 to 80 g, and those grouped to calculated activity received 160 µCi/g of thyroid tissue adjusted for 24 hours radioiodine uptake. Thyroid function tests (free thyroxine [T4] and thyroid stimulating hormone [TSH]) were monitored at 10, 16, and 24 weeks after radioactive iodine therapy. The primary outcome, treatment failure was defined as persistently elevated free T4 and low TSH. Results Of the 122 patients randomized, 56 in the fixed dose group and 56 in the calculated dose group completed the follow-up. At the end of 6 months, the percentage of treatment failure was 37.50% in the calculated dose group versus 19.64% in the fixed dose group with a relative risk of 0.53 (95% confidence interval, 0.28 to 0.98) favoring the fixed dose group. Conclusion Fixed dose radioiodine has a significantly lower incidence of persistent hyperthyroidism at 6 months post-radioactive therapy. PMID:26996425

  3. Free energy calculations, enhanced by a Gaussian ansatz, for the "chemical work" distribution.

    PubMed

    Boulougouris, Georgios C

    2014-05-15

    The evaluation of the free energy is essential in molecular simulation because it is intimately related with the existence of multiphase equilibrium. Recently, it was demonstrated that it is possible to evaluate the Helmholtz free energy using a single statistical ensemble along an entire isotherm by accounting for the "chemical work" of transforming each molecule, from an interacting one, to an ideal gas. In this work, we show that it is possible to perform such a free energy perturbation over a liquid vapor phase transition. Furthermore, we investigate the link between a general free energy perturbation scheme and the novel nonequilibrium theories of Crook's and Jarzinsky. We find that for finite systems away from the thermodynamic limit the second law of thermodynamics will always be an inequality for isothermal free energy perturbations, resulting always to a dissipated work that may tend to zero only in the thermodynamic limit. The work, the heat, and the entropy produced during a thermodynamic free energy perturbation can be viewed in the context of the Crooks and Jarzinsky formalism, revealing that for a given value of the ensemble average of the "irreversible" work, the minimum entropy production corresponded to a Gaussian distribution for the histogram of the work. We propose the evaluation of the free energy difference in any free energy perturbation based scheme on the average irreversible "chemical work" minus the dissipated work that can be calculated from the variance of the distribution of the logarithm of the work histogram, within the Gaussian approximation. As a consequence, using the Gaussian ansatz for the distribution of the "chemical work," accurate estimates for the chemical potential and the free energy of the system can be performed using much shorter simulations and avoiding the necessity of sampling the computational costly tails of the "chemical work." For a more general free energy perturbation scheme that the Gaussian ansatz may not be

  4. High-energy neutrinos from active galactic nuclei

    NASA Technical Reports Server (NTRS)

    Stecker, F. W.; Done, C.; Salamon, M. H.; Sommers, P.

    1991-01-01

    The spectrum and high-energy neutrino background flux from photomeson production in active galactic nuclei (AGN) is calculated using the recent UV and X-ray observations to define the photon fields and an accretion-disk shock-acceleration model for producing high-energy particles. Collectively, AGN produce the dominant isotropic neutrino background between 10,000 and 10 to the 10th GeV, detectable with current instruments. AGN neutrinos should produce a sphere of stellar disruption which may explain the 'broad-line region' seen in AGN.

  5. Calculating impacts of energy standards on energy demand in U.S. buildings with uncertainty in an integrated assessment model

    SciTech Connect

    Scott, Michael J.; Daly, Don S.; Hathaway, John E.; Lansing, Carina S.; Liu, Ying; McJeon, Haewon C.; Moss, Richard H.; Patel, Pralit L.; Peterson, Marty J.; Rice, Jennie S.; Zhou, Yuyu

    2015-10-01

    In this paper, an integrated assessment model (IAM) uses a newly-developed Monte Carlo analysis capability to analyze the impacts of more aggressive U.S. residential and commercial building-energy codes and equipment standards on energy consumption and energy service costs at the state level, explicitly recognizing uncertainty in technology effectiveness and cost, socioeconomics, presence or absence of carbon prices, and climate impacts on energy demand. The paper finds that aggressive building-energy codes and equipment standards are an effective, cost-saving way to reduce energy consumption in buildings and greenhouse gas emissions in U.S. states. This conclusion is robust to significant uncertainties in population, economic activity, climate, carbon prices, and technology performance and costs.

  6. Free-energy calculations for semi-flexible macromolecules: Applications to DNA knotting and looping

    SciTech Connect

    Giovan, Stefan M.; Scharein, Robert G.; Hanke, Andreas; Levene, Stephen D.

    2014-11-07

    We present a method to obtain numerically accurate values of configurational free energies of semiflexible macromolecular systems, based on the technique of thermodynamic integration combined with normal-mode analysis of a reference system subject to harmonic constraints. Compared with previous free-energy calculations that depend on a reference state, our approach introduces two innovations, namely, the use of internal coordinates to constrain the reference states and the ability to freely select these reference states. As a consequence, it is possible to explore systems that undergo substantially larger fluctuations than those considered in previous calculations, including semiflexible biopolymers having arbitrary ratios of contour length L to persistence length P. To validate the method, high accuracy is demonstrated for free energies of prime DNA knots with L/P = 20 and L/P = 40, corresponding to DNA lengths of 3000 and 6000 base pairs, respectively. We then apply the method to study the free-energy landscape for a model of a synaptic nucleoprotein complex containing a pair of looped domains, revealing a bifurcation in the location of optimal synapse (crossover) sites. This transition is relevant to target-site selection by DNA-binding proteins that occupy multiple DNA sites separated by large linear distances along the genome, a problem that arises naturally in gene regulation, DNA recombination, and the action of type-II topoisomerases.

  7. Calculations of many-particle--many-hole deformed state energies: Near degeneracies, deformation condensates

    SciTech Connect

    Zheng, D.C.; Berdichevsky, D.; Zamick, L.

    1988-07-01

    In deformed Hartree-Fock calculations with Skyrme interactions we observe a near degeneracy of the mean energies of many-particle--many-hole deformed intrinsic states. For example, in /sup 40/Ca the np-nh states with n = 2, 3, 4, 5, 6, 7, and 8 are nearly degenerate. The deformation parameter ..beta.. increases steadily from n = 2 to 8. The intrinsic state energy of the 8p-8h state is lower than that of the 4p-4h state for the interactions used here: SK III, SK IV, and SK VI. The calculations are also performed with the Skyrme III interaction for the even-even calcium and titanium isotopes. For /sup 44/Ti there is a near degeneracy of 6p-2h and 8p-4h. For the N>Z isotopes above, the two protons excitation lies lowest. Whereas the intrinsic state energies are much higher than the observed energies of the lowest-lying deformed states, the results when projection of J = 0/sup +/ states is carried out and pairing effects are taken into account, are encouraging.

  8. Calculations of many-particle-many-hole deformed state energies: Near degeneracies, deformation condensates

    NASA Astrophysics Data System (ADS)

    Zheng, D. C.; Berdichevsky, D.; Zamick, L.

    1988-07-01

    In deformed Hartree-Fock calculations with Skyrme interactions we observe a near degeneracy of the mean energies of many-particle-many-hole deformed intrinsic states. For example, in 40Ca the np-nh states with n=2, 3, 4, 5, 6, 7, and 8 are nearly degenerate. The deformation parameter β increases steadily from n=2 to 8. The intrinsic state energy of the 8p-8h state is lower than that of the 4p-4h state for the interactions used here-SK III, SK IV, and SK VI. The calculations are also performed with the Skyrme III interaction for the even-even calcium and titanium isotopes. For 44Ti there is a near degeneracy of 6p-2h and 8p-4h. For the N>Z isotopes above, the two protons excitation lies lowest. Whereas the intrinsic state energies are much higher than the observed energies of the lowest-lying deformed states, the results when projection of J=0+ states is carried out and pairing effects are taken into account, are encouraging.

  9. Channeling Children's Energy through Vocabulary Activities

    ERIC Educational Resources Information Center

    Schindler, Andrea

    2006-01-01

    In this article, the author shares vocabulary development activities for young learners. These activities channel students' energy and make learning more effective and fun. The author stresses the importance of giving young learners a good language-learning experience, and the challenges of teaching young learners who are not literate in their L1.…

  10. Improved methods for Feynman path integral calculations and their application to calculate converged vibrational–rotational partition functions, free energies, enthalpies, entropies, and heat capacities for methane

    SciTech Connect

    Mielke, Steven L. E-mail: truhlar@umn.edu; Truhlar, Donald G. E-mail: truhlar@umn.edu

    2015-01-28

    We present an improved version of our “path-by-path” enhanced same path extrapolation scheme for Feynman path integral (FPI) calculations that permits rapid convergence with discretization errors ranging from O(P{sup −6}) to O(P{sup −12}), where P is the number of path discretization points. We also present two extensions of our importance sampling and stratified sampling schemes for calculating vibrational–rotational partition functions by the FPI method. The first is the use of importance functions for dihedral angles between sets of generalized Jacobi coordinate vectors. The second is an extension of our stratification scheme to allow some strata to be defined based only on coordinate information while other strata are defined based on both the geometry and the energy of the centroid of the Feynman path. These enhanced methods are applied to calculate converged partition functions by FPI methods, and these results are compared to ones obtained earlier by vibrational configuration interaction (VCI) calculations, both calculations being for the Jordan–Gilbert potential energy surface. The earlier VCI calculations are found to agree well (within ∼1.5%) with the new benchmarks. The FPI partition functions presented here are estimated to be converged to within a 2σ statistical uncertainty of between 0.04% and 0.07% for the given potential energy surface for temperatures in the range 300–3000 K and are the most accurately converged partition functions for a given potential energy surface for any molecule with five or more atoms. We also tabulate free energies, enthalpies, entropies, and heat capacities.

  11. Improved methods for Feynman path integral calculations and their application to calculate converged vibrational-rotational partition functions, free energies, enthalpies, entropies, and heat capacities for methane.

    PubMed

    Mielke, Steven L; Truhlar, Donald G

    2015-01-28

    We present an improved version of our "path-by-path" enhanced same path extrapolation scheme for Feynman path integral (FPI) calculations that permits rapid convergence with discretization errors ranging from O(P(-6)) to O(P(-12)), where P is the number of path discretization points. We also present two extensions of our importance sampling and stratified sampling schemes for calculating vibrational-rotational partition functions by the FPI method. The first is the use of importance functions for dihedral angles between sets of generalized Jacobi coordinate vectors. The second is an extension of our stratification scheme to allow some strata to be defined based only on coordinate information while other strata are defined based on both the geometry and the energy of the centroid of the Feynman path. These enhanced methods are applied to calculate converged partition functions by FPI methods, and these results are compared to ones obtained earlier by vibrational configuration interaction (VCI) calculations, both calculations being for the Jordan-Gilbert potential energy surface. The earlier VCI calculations are found to agree well (within ∼1.5%) with the new benchmarks. The FPI partition functions presented here are estimated to be converged to within a 2σ statistical uncertainty of between 0.04% and 0.07% for the given potential energy surface for temperatures in the range 300-3000 K and are the most accurately converged partition functions for a given potential energy surface for any molecule with five or more atoms. We also tabulate free energies, enthalpies, entropies, and heat capacities.

  12. Improved methods for Feynman path integral calculations and their application to calculate converged vibrational-rotational partition functions, free energies, enthalpies, entropies, and heat capacities for methane.

    PubMed

    Mielke, Steven L; Truhlar, Donald G

    2015-01-28

    We present an improved version of our "path-by-path" enhanced same path extrapolation scheme for Feynman path integral (FPI) calculations that permits rapid convergence with discretization errors ranging from O(P(-6)) to O(P(-12)), where P is the number of path discretization points. We also present two extensions of our importance sampling and stratified sampling schemes for calculating vibrational-rotational partition functions by the FPI method. The first is the use of importance functions for dihedral angles between sets of generalized Jacobi coordinate vectors. The second is an extension of our stratification scheme to allow some strata to be defined based only on coordinate information while other strata are defined based on both the geometry and the energy of the centroid of the Feynman path. These enhanced methods are applied to calculate converged partition functions by FPI methods, and these results are compared to ones obtained earlier by vibrational configuration interaction (VCI) calculations, both calculations being for the Jordan-Gilbert potential energy surface. The earlier VCI calculations are found to agree well (within ∼1.5%) with the new benchmarks. The FPI partition functions presented here are estimated to be converged to within a 2σ statistical uncertainty of between 0.04% and 0.07% for the given potential energy surface for temperatures in the range 300-3000 K and are the most accurately converged partition functions for a given potential energy surface for any molecule with five or more atoms. We also tabulate free energies, enthalpies, entropies, and heat capacities. PMID:25637967

  13. Molecular dynamics and free energy perturbation calculations on fluorocarbons and aspartyl protease inhibitors

    SciTech Connect

    Gough, C.A.

    1992-01-01

    Molecular dynamics (MD) simulations of pure tetrafluoromethane and trifluoromethane were performed to determine the van der Waals parameters R[sup *] and [epsilon] for fluorine and for the hydrogen of trifluoromethane. The best values of R[sup *] and [epsilon] for fluorine were determined to be 1.75 [angstrom] and 0.061 kcal/mole. For the hydrogen, the optimal R[sup *] and [epsilon] were determined to be 1.21 [angstrom] and 0.015 kcal/mole. The relative free energies of aqueous solvation of several fluorinated derivatives of methane were calculated using the FEP method. The calculations duplicated the experimental free energies relatively well, but the calculation of the bond-potential of mean force (bond-PMF) contribution was necessary in order to get the most satisfactory agreement with experiment. In addition, results of an ethanol-to-ethane perturbation in aqueous solution show that the bond-PMF contribution is important even for FEP calculations not involving large changes in size if the length of a bond is changed during the perturbation. MD simulations were run to determine the structure of the waters solvating fluoromethane, trifluoromethane, and tetrafluoromethane. The calculated radical distribution functions and water orientations suggest that, on average, there is one water-fluorine hydrogen bond in the case of fluoromethane. In contrast, there is no evidence of water-flourine hydrogen-bonding in the cases of trifluoromethane or tetrafluoromethane. These results suggest that the greater aqueous solubility of fluromethane relative to trifluoromethane is largely due to the poorer quality of the water-fluorine electrostatic interactions in trifluoromethane.

  14. Recent advances in QM/MM free energy calculations using reference potentials☆

    PubMed Central

    Duarte, Fernanda; Amrein, Beat A.; Blaha-Nelson, David; Kamerlin, Shina C.L.

    2015-01-01

    Background Recent years have seen enormous progress in the development of methods for modeling (bio)molecular systems. This has allowed for the simulation of ever larger and more complex systems. However, as such complexity increases, the requirements needed for these models to be accurate and physically meaningful become more and more difficult to fulfill. The use of simplified models to describe complex biological systems has long been shown to be an effective way to overcome some of the limitations associated with this computational cost in a rational way. Scope of review Hybrid QM/MM approaches have rapidly become one of the most popular computational tools for studying chemical reactivity in biomolecular systems. However, the high cost involved in performing high-level QM calculations has limited the applicability of these approaches when calculating free energies of chemical processes. In this review, we present some of the advances in using reference potentials and mean field approximations to accelerate high-level QM/MM calculations. We present illustrative applications of these approaches and discuss challenges and future perspectives for the field. Major conclusions The use of physically-based simplifications has shown to effectively reduce the cost of high-level QM/MM calculations. In particular, lower-level reference potentials enable one to reduce the cost of expensive free energy calculations, thus expanding the scope of problems that can be addressed. General significance As was already demonstrated 40 years ago, the usage of simplified models still allows one to obtain cutting edge results with substantially reduced computational cost. This article is part of a Special Issue entitled Recent developments of molecular dynamics. PMID:25038480

  15. ACDOS1: a computer code to calculate dose rates from neutron activation of neutral beamlines and other fusion-reactor components

    SciTech Connect

    Keney, G.S.

    1981-08-01

    A computer code has been written to calculate neutron induced activation of neutral-beam injector components and the corresponding dose rates as a function of geometry, component composition, and time after shutdown. The code, ACDOS1, was written in FORTRAN IV to calculate both activity and dose rates for up to 30 target nuclides and 50 neutron groups. Sufficient versatility has also been incorporated into the code to make it applicable to a variety of general activation problems due to neutrons of energy less than 20 MeV.

  16. First-principles approach to calculating energy level alignment at aqueous semiconductor interfaces

    DOE PAGES

    Kharche, Neerav; Muckerman, James T.; Hybertsen, Mark S.

    2014-10-21

    A first-principles approach is demonstrated for calculating the relationship between an aqueous semiconductor interface structure and energy level alignment. The physical interface structure is sampled using density functional theory based molecular dynamics, yielding the interface electrostatic dipole. The GW approach from many-body perturbation theory is used to place the electronic band edge energies of the semiconductor relative to the occupied 1b₁ energy level in water. The application to the specific cases of nonpolar (101¯0 ) facets of GaN and ZnO reveals a significant role for the structural motifs at the interface, including the degree of interface water dissociation and themore » dynamical fluctuations in the interface Zn-O and O-H bond orientations. As a result, these effects contribute up to 0.5 eV.« less

  17. First-principles approach to calculating energy level alignment at aqueous semiconductor interfaces

    SciTech Connect

    Kharche, Neerav; Muckerman, James T.; Hybertsen, Mark S.

    2014-10-21

    A first-principles approach is demonstrated for calculating the relationship between an aqueous semiconductor interface structure and energy level alignment. The physical interface structure is sampled using density functional theory based molecular dynamics, yielding the interface electrostatic dipole. The GW approach from many-body perturbation theory is used to place the electronic band edge energies of the semiconductor relative to the occupied 1benergy level in water. The application to the specific cases of nonpolar (101¯0 ) facets of GaN and ZnO reveals a significant role for the structural motifs at the interface, including the degree of interface water dissociation and the dynamical fluctuations in the interface Zn-O and O-H bond orientations. As a result, these effects contribute up to 0.5 eV.

  18. Free Energies of Redox Half-Reactions from First-Principles Calculations.

    PubMed

    Tazhigulov, Ruslan N; Bravaya, Ksenia B

    2016-07-01

    Quantitative prediction of the energetics of redox half-reactions is still a challenge for modern computational chemistry. Here, we propose a simple scheme for reliable calculations of vertical ionization and attachment energies, as well as of redox potentials of solvated molecules. The approach exploits linear response approximation in the context of explicit solvent simulations with spherical boundary conditions. It is shown that both vertical ionization energies and vertical electron affinities, and, consequently redox potentials, exhibit linear dependence on the inverse radius of the solvation sphere. The explanation of the linear dependence is provided, and an extrapolation scheme is suggested. The proposed approach accounts for the specific short-range interactions within hybrid DFT and effective fragment potential approach as well as for the asymptotic system-size effects. The computed vertical ionization energies and redox potentials are in excellent agreement with the experimental values.

  19. S-model calculations for high-energy-electron-impact double ionization of helium

    NASA Astrophysics Data System (ADS)

    Gasaneo, G.; Mitnik, D. M.; Randazzo, J. M.; Ancarani, L. U.; Colavecchia, F. D.

    2013-04-01

    In this paper the double ionization of helium by high-energy electron impact is studied. The corresponding four-body Schrödinger equation is transformed into a set of driven equations containing successive orders in the projectile-target interaction. The transition amplitude obtained from the asymptotic limit of the first-order solution is shown to be equivalent to the familiar first Born approximation. The first-order driven equation is solved within a generalized Sturmian approach for an S-wave (e,3e) model process with high incident energy and small momentum transfer corresponding to published measurements. Two independent numerical implementations, one using spherical and the other hyperspherical coordinates, yield mutual agreement. From our ab initio solution, the transition amplitude is extracted, and single differential cross sections are calculated and could be taken as benchmark values to test other numerical methods in a previously unexplored energy domain.

  20. Measurements and calculations of neutron scattering angular distributions over a wide mass and energy range

    SciTech Connect

    Hansen, L.F.

    1985-05-01

    Neutron elastic and inelastic differential cross sections for targets between /sup 9/Be and /sup 239/Pu at energies, E > 14 MeV have been measured using the Livermore and Ohio University neutron time-of-flight facilities. We review here the data and the analyses based on two local microscopic optical potentials: that of Jeukenne, Lejeune and Mahaux, and that of Brieva and Rook. The results are also compared with calculations using global potentials. Coupled channel formalism has been used in the analysis of targets with strong deformations, such as Be, C, Ta, and actinides. The value of the microscopic optical potentials as a tool to predict elastic and inelastic neutron cross sections over a wide mass and energy range is discussed. The need for neutron measurements up to higher energies and their analysis in conjunction with (p,p) and charge exchange (p,n) data is addressed. 17 refs.

  1. Calculation of electron affinities of polycyclic aromatic hydrocarbons and solvation energies of their radical anion.

    PubMed

    Betowski, Leon D; Enlow, Mark; Riddick, Lee; Aue, Donald H

    2006-11-30

    Electron affinities (EAs) and free energies for electron attachment (DeltaGo(a,298K)) have been directly calculated for 45 polynuclear aromatic hydrocarbons (PAHs) and related molecules by a variety of theoretical methods, with standard regression errors of about 0.07 eV (mean unsigned error = 0.05 eV) at the B3LYP/6-31 + G(d,p) level and larger errors with HF or MP2 methods or using Koopmans' Theorem. Comparison of gas-phase free energies with solution-phase reduction potentials provides a measure of solvation energy differences between the radical anion and neutral PAH. A simple Born-charging model approximates the solvation effects on the radical anions, leading to a good correlation with experimental solvation energy differences. This is used to estimate unknown or questionable EAs from reduction potentials. Two independent methods are used to predict DeltaGo(a,298K) values: (1) based upon DFT methods, or (2) based upon reduction potentials and the Born model. They suggest reassignments or a resolution of conflicting experimental EAs for nearly one-half (17 of 38) of the PAH molecules for which experimental EAs have been reported. For the antiaromatic molecules, 1,3,5-tri-tert-butylpentalene and the dithia-substituted cyclobutadiene 1, the reduction potentials lead to estimated EAs close to those expected from DFT calculations and provide a basis for the prediction of the EAs and reduction potentials of pentalene and cyclobutadiene. The Born model has been used to relate the electrostatic solvation energies of PAH and hydrocarbon radical anions, and spherical halide anions, alkali metal cations, and ammonium ions to effective ionic radii from DFT electron-density envelopes. The Born model used for PAHs has been successfully extended here to quantitatively explain the solvation energy of the C60 radical anion.

  2. Improving the LIE Method for Binding Free Energy Calculations of Protein-Ligand Complexes.

    PubMed

    Miranda, Williams E; Noskov, Sergei Yu; Valiente, Pedro A

    2015-09-28

    In this work, we introduced an improved linear interaction energy (LIE) method parameterization for computations of protein–ligand binding free energies. The protocol, coined LIE-D, builds on the linear relationship between the empirical coefficient γ in the standard LIE scheme and the D parameter, introduced in our work. The D-parameter encompasses the balance (difference) between electrostatic (polar) and van der Waals (nonpolar) energies in protein–ligand complexes. Leave-one-out cross-validation showed that LIE-D reproduced accurately the absolute binding free energies for our training set of protein–ligand complexes (<|error|> = 0.92 kcal/mol, SDerror = 0.66 kcal/mol, R(2) = 0.90, QLOO(2) = 0.89, and sPRESS(LOO) = 1.28 kcal/mol). We also demonstrated LIE-D robustness by predicting accurately the binding free energies for three different protein–ligand systems outside the training data set, where the electrostatic and van der Waals interaction energies were calculated with different force fields. PMID:26180998

  3. Gamma-ray energy buildup factor calculations and shielding effects of some Jordanian building structures

    NASA Astrophysics Data System (ADS)

    Sharaf, J. M.; Saleh, H.

    2015-05-01

    The shielding properties of three different construction styles, and building materials, commonly used in Jordan, were evaluated using parameters such as attenuation coefficients, equivalent atomic number, penetration depth and energy buildup factor. Geometric progression (GP) method was used to calculate gamma-ray energy buildup factors of limestone, concrete, bricks, cement plaster and air for the energy range 0.05-3 MeV, and penetration depths up to 40 mfp. It has been observed that among the examined building materials, limestone offers highest value for equivalent atomic number and linear attenuation coefficient and the lowest values for penetration depth and energy buildup factor. The obtained buildup factors were used as basic data to establish the total equivalent energy buildup factors for three different multilayer construction styles using an iterative method. The three styles were then compared in terms of fractional transmission of photons at different incident photon energies. It is concluded that, in case of any nuclear accident, large multistory buildings with five layers exterior walls, style A, could effectively attenuate radiation more than small dwellings of any construction style.

  4. Calculation of electron trajectory and energy deposition in no screening region

    NASA Astrophysics Data System (ADS)

    Kia, Mohammad Reza; Noshad, Houshyar

    2016-01-01

    The probability density function (PDF) of energy for inelastic collision is obtained by solving the integro-differential form of the quantity equation with the Bhabha differential cross section for particles with spin 1/2. Hence, the total PDF in no screening region is determined by folding theory with the following two assumptions: (1) the electron loses energy by collision and radiation and (2) the electron velocity does not change with a thin absorber. Therefore, a set of coupled stochastic differential equations based on the deviation and energy loss PDFs for electron is presented to obtain the electron trajectory inside the target. The energy PDFs for an electron beam with incident energy of 15.7 MeV inside aluminum and copper are calculated. Besides, the dose distributions for an electron beam with incident energies of 20, 10.2, 6, and 0.5 MeV in water are obtained. The results are in excellent agreement with the experimental data reported in the literature.

  5. Improving the LIE Method for Binding Free Energy Calculations of Protein-Ligand Complexes.

    PubMed

    Miranda, Williams E; Noskov, Sergei Yu; Valiente, Pedro A

    2015-09-28

    In this work, we introduced an improved linear interaction energy (LIE) method parameterization for computations of protein–ligand binding free energies. The protocol, coined LIE-D, builds on the linear relationship between the empirical coefficient γ in the standard LIE scheme and the D parameter, introduced in our work. The D-parameter encompasses the balance (difference) between electrostatic (polar) and van der Waals (nonpolar) energies in protein–ligand complexes. Leave-one-out cross-validation showed that LIE-D reproduced accurately the absolute binding free energies for our training set of protein–ligand complexes (<|error|> = 0.92 kcal/mol, SDerror = 0.66 kcal/mol, R(2) = 0.90, QLOO(2) = 0.89, and sPRESS(LOO) = 1.28 kcal/mol). We also demonstrated LIE-D robustness by predicting accurately the binding free energies for three different protein–ligand systems outside the training data set, where the electrostatic and van der Waals interaction energies were calculated with different force fields.

  6. Calculation of energy levels, {ital E}1 transition amplitudes, and parity violation in francium

    SciTech Connect

    Dzuba, V.A.; Flambaum, V.V.; Sushkov, O.P.

    1995-05-01

    Many-body perturbation theory in the screened Coulomb interaction was used to calculate energy levels, {ital E}1 trransition amplitudes, and the parity-nonconserving (PNC) {ital E}1 amplitude of the 7{ital s}-8{ital s} transition in francium. The method takes into account the core-polarization effect, the second-order correlations, and the three dominating sequences of higher-order correlation diagrams: screening of the electron-electron interaction, particle-hole interaction, and the iterations of the self-energy operator. The result for the PNC amplitude for {sup 223}Fr is {ital E}1(7{ital s}-8{ital s})=(1.59{plus_minus}{similar_to}1%){times}10{sup {minus}10}{ital iea}{sub {ital B}}({minus}{ital Q}{sub {ital W}}/{ital N}), where {ital Q}{sub {ital W}} is the weak charge of the nucleus, {ital N}=136 is the number of neutrons, {ital e}={vert_bar}{ital e}{vert_bar} is the elementary charge, and {ital a}{sub {ital B}} is the Bohr radius. Our prediction for the position of the 8{ital s} energy level of Fr, which has not been measured yet, is 13 110 cm{sup {minus}1} below the limit of the continuous spectrum. The accuracy of the calculations was controlled by comparison with available experimental data and analogous calculations for cesium. It is estimated to be {similar_to}0.1% for the energy levels and {similar_to}1% for the transition amplitudes.

  7. On the importance of full-dimensionality in low-energy molecular scattering calculations.

    PubMed

    Faure, Alexandre; Jankowski, Piotr; Stoecklin, Thierry; Szalewicz, Krzysztof

    2016-01-01

    Scattering of H2 on CO is of great importance in astrophysics and also is a benchmark system for comparing theory to experiment. We present here a new 6-dimensional potential energy surface for the ground electronic state of H2-CO with an estimated uncertainty of about 0.6 cm(-1) in the global minimum region, several times smaller than achieved earlier. This potential has been used in nearly exact 6-dimensional quantum scattering calculations to compute state-to-state cross-sections measured in low-energy crossed-beam experiments. Excellent agreement between theory and experiment has been achieved in all cases. We also show that the fully 6-dimensional approach is not needed with the current accuracy of experimental data since an equally good agreement with experiment was obtained using only a 4-dimensional treatment, which validates the rigid-rotor approach widely used in scattering calculations. This finding, which disagrees with some literature statements, is important since for larger systems full-dimensional scattering calculations are currently not possible. PMID:27333870

  8. Refractive index, band gap energy, dielectric constant and polarizability calculations of ferroelectric Ethylenediaminium Tetrachlorozincate crystal

    NASA Astrophysics Data System (ADS)

    Kalyanaraman, S.; Shajinshinu, P. M.; . Vijayalakshmi, S.

    2015-11-01

    Single crystal of Ethylenediaminium Tetrachlorozincate has been grown by slow evaporation method. The single crystal XRD study confirms the orthorhombic structure of the crystal. The presence of functional group vibrations are ascertained through FTIR and Raman studies. In optical studies, the insulating behaviour of the material is established by Tauc plot. The refractive index and the real dielectric constant of the crystal are calculated. The electronic polarizability in the high frequency optical region is also calculated from the dielectric constant values by using the Clausius-Mossotti equation. The large value of dielectric constant is identified through dielectric studies and it points to the ferroelectric behaviour of the material. Further an experimental study confirms the ferroelectric behaviour of the material. The total polarizability of the crystal owing to the space charge, dipole, ionic and electronic polarizability contributions is obtained experimentally, and it matches well with the theoretically obtained value from Penn analysis. Further, Plasmon energy and Fermi energy of the material are also calculated using Penn analysis.

  9. Calculation of excitation energies from the CC2 linear response theory using Cholesky decomposition

    SciTech Connect

    Baudin, Pablo; Marín, José Sánchez; Cuesta, Inmaculada García; Sánchez de Merás, Alfredo M. J.

    2014-03-14

    A new implementation of the approximate coupled cluster singles and doubles CC2 linear response model is reported. It employs a Cholesky decomposition of the two-electron integrals that significantly reduces the computational cost and the storage requirements of the method compared to standard implementations. Our algorithm also exploits a partitioning form of the CC2 equations which reduces the dimension of the problem and avoids the storage of doubles amplitudes. We present calculation of excitation energies of benzene using a hierarchy of basis sets and compare the results with conventional CC2 calculations. The reduction of the scaling is evaluated as well as the effect of the Cholesky decomposition parameter on the quality of the results. The new algorithm is used to perform an extrapolation to complete basis set investigation on the spectroscopically interesting benzylallene conformers. A set of calculations on medium-sized molecules is carried out to check the dependence of the accuracy of the results on the decomposition thresholds. Moreover, CC2 singlet excitation energies of the free base porphin are also presented.

  10. On the importance of full-dimensionality in low-energy molecular scattering calculations

    PubMed Central

    Faure, Alexandre; Jankowski, Piotr; Stoecklin, Thierry; Szalewicz, Krzysztof

    2016-01-01

    Scattering of H2 on CO is of great importance in astrophysics and also is a benchmark system for comparing theory to experiment. We present here a new 6-dimensional potential energy surface for the ground electronic state of H2-CO with an estimated uncertainty of about 0.6 cm−1 in the global minimum region, several times smaller than achieved earlier. This potential has been used in nearly exact 6-dimensional quantum scattering calculations to compute state-to-state cross-sections measured in low-energy crossed-beam experiments. Excellent agreement between theory and experiment has been achieved in all cases. We also show that the fully 6-dimensional approach is not needed with the current accuracy of experimental data since an equally good agreement with experiment was obtained using only a 4-dimensional treatment, which validates the rigid-rotor approach widely used in scattering calculations. This finding, which disagrees with some literature statements, is important since for larger systems full-dimensional scattering calculations are currently not possible. PMID:27333870

  11. Al(fcc):Al{sub 3}Sc(L1{sub 2}) interphase boundary energy calculations

    SciTech Connect

    Hyland, R.W. Jr.; Rohrer, C.L.; Asta, M.; Foiles, S.M.

    1998-06-12

    These calculations assess the applicability of classical nucleation theory to the reaction f.c.c. {r_arrow} L1{sub 2} occurring in dilute Al-Sc alloys. The orientation and temperature dependence of the energies of coherent Al(f.c.c.):Al{sub 3}Sc(L1{sub 2}) interphase boundaries were studied using atomistic simulation and a low temperature expansion (LTE) of the grand potential. Embedded atom method potentials were developed for both sets of calculations. Atomistic 0 K results for the anisotropy of the interphase boundary enthalpy gave {gamma}{sub (100)} < {gamma}{sub (110)} < {gamma}{sub (111)} with values of 32.5, 51.3, and 66.3 mJ/m{sup 2}, respectively. LTE calculations of the excess grand potential of the (100) interface predicted a nearly temperature independent interfacial energy below 400 K that decreased modestly above 400 K. Monte Carlo (MC) simulations produced a compositional diffuseness of about 4 atomic layers separating the two bulk phases. Because the spatial extent of this region is very similar to the classically determined critical nucleus dimensions extracted from nucleation rate data, it is concluded that critical nuclei of Al{sub 3}Sc are most likely of nonclassical design at high undercooling.

  12. Alternative Approaches to Calculate Benefits of an Energy Imbalance Market With Wind and Solar Energy: Preprint

    SciTech Connect

    Kirby, B.; King, J.; Milligan, M.

    2012-06-01

    The anticipated increase in variable generation in the Western Interconnection over the next several years has raised concerns about how to maintain system balance, especially in smaller Balancing Authority Areas (BAAs). Given renewable portfolio standards in the West, it is possible that more than 50 gigawatts of wind capacity will be installed by 2020. Significant quantities of solar generation are likely to be added as well. The consequent increase in variability and uncertainty that must be managed by the conventional generation fleet and responsive loads has resulted in a proposal for an Energy Imbalance Market (EIM). This paper extends prior work to estimate the reserve requirements for regulation, spinning, and non-spinning reserves with and without the EIM. We also discuss alternative approaches to allocating reserve requirements and show that some apparently attractive allocation methods have undesired consequences.

  13. TASK 2.5.4 DEVELOPMENT OF AN ENERGY SAVINGS CALCULATOR

    SciTech Connect

    Miller, William A; New, Joshua Ryan; Desjarlais, Andre Omer; Huang, Joe; Erdem, Ender; Ronnen, Levinson

    2010-03-01

    California s major energy utilities and the California Energy Commission (CEC) are seeking to allocate capital that yields the greatest return on investment for energy infrastructure that meets any part of the need for reliable supplies of energy. The utilities are keenly interested in knowing the amount of electrical energy savings that would occur if cool roof color materials are adopted in the building market. To meet this need the Oak Ridge National Laboratory and the Lawrence Berkeley National Laboratory (LBNL) have been collaborating on a Public Interest Energy Research (PIER) project to develop an industry-consensus energy-savings calculator. The task was coordinated with an ongoing effort supported by the DOE to develop one calculator to achieve both the DOE and the EPA objectives for deployment of cool roof products. Recent emphasis on domestic building energy use has made the work a top priority by the Department of Energy s (DOE) Building Technologies Program. The Roof Savings Calculator (RSC) tool is designed to help building owners, manufacturers, distributors, contractors and practitioners easily run complex simulations. The latest web technologies and usability design were employed to provide an easy input interface to an annual simulation of hour-by-hour, whole-building performance using the world-class simulation tools DOE-2.1E and AtticSim. Building defaults were assigned based on the best available statistical evidence and can provide energy and cost savings after the user selects nothing more than the building location. A key goal for the tool is to promote the energy benefits of cool color tile, metal and asphalt shingle roof products and other energy saving systems. The RSC tool focuses on applications for the roof and attic; however, the code conducts a whole building simulation that puts the energy and heat flows of the roof and attic into the perspective of the whole house. An annual simulation runs in about 30 sec. In addition to cool

  14. Generalized Born and Explicit Solvent Models for Free Energy Calculations in Organic Solvents: Cyclodextrin Dimerization.

    PubMed

    Zhang, Haiyang; Tan, Tianwei; van der Spoel, David

    2015-11-10

    Evaluation of solvation (binding) free energies with implicit solvent models in different dielectric environments for biological simulations as well as high throughput ligand screening remain challenging endeavors. In order to address how well implicit solvent models approximate explicit ones we examined four generalized Born models (GB(Still), GB(HCT), GB(OBC)I, and GB(OBC)II) for determining the dimerization free energy (ΔG(0)) of β-cyclodextrin monomers in 17 implicit solvents with dielectric constants (D) ranging from 5 to 80 and compared the results to previous free energy calculations with explicit solvents ( Zhang et al. J. Phys. Chem. B 2012 , 116 , 12684 - 12693 ). The comparison indicates that neglecting the environmental dependence of Born radii appears acceptable for such calculations involving cyclodextrin and that the GB(Still) and GB(OBC)I models yield a reasonable estimation of ΔG(0), although the details of binding are quite different from explicit solvents. Large discrepancies between implicit and explicit solvent models occur in high-dielectric media with strong hydrogen bond (HB) interruption properties. ΔG(0) with the GB models is shown to correlate strongly to 2(D-1)/(2D+1) (R(2) ∼ 0.90) in line with the Onsager reaction field ( Onsager J. Am. Chem. Soc. 1936 , 58 , 1486 - 1493 ) but to be very sensitive to D (D < 10) as well. Both high-dielectric environments where hydrogen bonds are of interest and low-dielectric media such as protein binding pockets and membrane interiors therefore need to be considered with caution in GB-based calculations. Finally, a literature analysis of Gibbs energy of solvation of small molecules in organic liquids shows that the Onsager relation does not hold for real molecules since the correlation between ΔG(0) and 2(D-1)/(2D+1) is low for most solutes. Interestingly, explicit solvent calculations of the solvation free energy ( Zhang et al. J. Chem. Inf. Model . 2015 , 55 , 1192 - 1201 ) reproduce the weak

  15. A simplified analytical dose calculation algorithm accounting for tissue heterogeneity for low-energy brachytherapy sources.

    PubMed

    Mashouf, Shahram; Lechtman, Eli; Beaulieu, Luc; Verhaegen, Frank; Keller, Brian M; Ravi, Ananth; Pignol, Jean-Philippe

    2013-09-21

    The American Association of Physicists in Medicine Task Group No. 43 (AAPM TG-43) formalism is the standard for seeds brachytherapy dose calculation. But for breast seed implants, Monte Carlo simulations reveal large errors due to tissue heterogeneity. Since TG-43 includes several factors to account for source geometry, anisotropy and strength, we propose an additional correction factor, called the inhomogeneity correction factor (ICF), accounting for tissue heterogeneity for Pd-103 brachytherapy. This correction factor is calculated as a function of the media linear attenuation coefficient and mass energy absorption coefficient, and it is independent of the source internal structure. Ultimately the dose in heterogeneous media can be calculated as a product of dose in water as calculated by TG-43 protocol times the ICF. To validate the ICF methodology, dose absorbed in spherical phantoms with large tissue heterogeneities was compared using the TG-43 formalism corrected for heterogeneity versus Monte Carlo simulations. The agreement between Monte Carlo simulations and the ICF method remained within 5% in soft tissues up to several centimeters from a Pd-103 source. Compared to Monte Carlo, the ICF methods can easily be integrated into a clinical treatment planning system and it does not require the detailed internal structure of the source or the photon phase-space.

  16. The impact of covariance information on criticality safety calculations in the resolved resonance energy range.

    SciTech Connect

    Naberejnev, D. G.; Palmiotti, G.; Yang, W. S.

    2004-06-11

    Resonance data play a significant role in the calculations of systems considered for criticality safety applications. K{sub eff}, the major parameter of interest in such a type of calculations, can be heavily dependent both on the quality of the resonance data as well as on the accuracy achieved in the processing of these data. If reasonable uncertainty values are available, in conjunction with their correlation in energy and among type of resonance parameters, one can exploit existing methodologies, based on perturbation theory, in order to evaluate their impact on the integral parameter of interest, i.e., K{sub eff} in our case, in practical applications. In this way, one could be able to judge if the uncertainty on specific quantities, e.g., covariances on resonance data, have a significant impact and, therefore, deserve a careful evaluation. This report, first, will recall the basic principles that lie behind an uncertainty evaluation and review the current situation in the field of covariance data. Then an attempt is made for defining a methodology that allows calculating covariances values for resolved resonance parameters. Finally, practical applications, of interest for criticality safety calculations, illustrate the impact of different assumptions on correlations among resolved resonance parameters.

  17. Formation energies of intrinsic point defects in monoclinic VO2 studied by first-principles calculations

    NASA Astrophysics Data System (ADS)

    Cui, Yuanyuan; Liu, Bin; Chen, Lanli; Luo, Hongjie; Gao, Yanfeng

    2016-10-01

    VO2 is an attractive candidate for intelligent windows and thermal sensors. There are challenges for developing VO2-based devices, since the properties of monoclinic VO2 are very sensitive to its intrinsic point defects. In this work, the formation energies of the intrinsic point defects in monoclinic VO2 were studied through the first-principles calculations. Vacancies, interstitials, as well as antisites at various charge states were taken into consideration, and the finite-size supercell correction scheme was adopted as the charge correction scheme. Our calculation results show that the oxygen interstitial and oxygen vacancy are the most abundant intrinsic defects in the oxygen rich and oxygen deficient condition, respectively, indicating a consistency with the experimental results. The calculation results suggest that the oxygen interstitial or oxygen vacancy is correlated with the charge localization, which can introduce holes or electrons as free carriers and subsequently narrow the band gap of monoclinic VO2. These calculations and interpretations concerning the intrinsic point defects would be helpful for developing VO2-based devices through defect modifications.

  18. Calculation of energy-barrier lowering by incoherent switching in spin-transfer torque magnetoresistive random-access memory

    SciTech Connect

    Munira, Kamaram; Visscher, P. B.

    2015-05-07

    To make a useful spin-transfer torque magnetoresistive random-access memory (STT-MRAM) device, it is necessary to be able to calculate switching rates, which determine the error rates of the device. In a single-macrospin model, one can use a Fokker-Planck equation to obtain a low-current thermally activated rate ∝exp(−E{sub eff}/k{sub B}T). Here, the effective energy barrier E{sub eff} scales with the single-macrospin energy barrier KV, where K is the effective anisotropy energy density and V the volume. A long-standing paradox in this field is that the actual energy barrier appears to be much smaller than this. It has been suggested that incoherent motions may lower the barrier, but this has proved difficult to quantify. In the present paper, we show that the coherent precession has a magnetostatic instability, which allows quantitative estimation of the energy barrier and may resolve the paradox.

  19. Qgui: A high-throughput interface for automated setup and analysis of free energy calculations and empirical valence bond simulations in biological systems.

    PubMed

    Isaksen, Geir Villy; Andberg, Tor Arne Heim; Åqvist, Johan; Brandsdal, Bjørn Olav

    2015-07-01

    Structural information and activity data has increased rapidly for many protein targets during the last decades. In this paper, we present a high-throughput interface (Qgui) for automated free energy and empirical valence bond (EVB) calculations that use molecular dynamics (MD) simulations for conformational sampling. Applications to ligand binding using both the linear interaction energy (LIE) method and the free energy perturbation (FEP) technique are given using the estrogen receptor (ERα) as a model system. Examples of free energy profiles obtained using the EVB method for the rate-limiting step of the enzymatic reaction catalyzed by trypsin are also shown. In addition, we present calculation of high-precision Arrhenius plots to obtain the thermodynamic activation enthalpy and entropy with Qgui from running a large number of EVB simulations.

  20. Design, synthesis, characterization, quantum-chemical calculations and anti-inflammatory activity of novel series of thiophene derivatives

    NASA Astrophysics Data System (ADS)

    Helal, M. H.; Salem, M. A.; Gouda, M. A.; Ahmed, N. S.; El-Sherif, A. A.

    2015-08-01

    Interaction of 1-(4-morpholinophenyl)ethanone 1 with either malononitrile or ethyl cyanoacetate 2 afforded Knoevenagel-Cope product 3. In subsequent treatment of 3 with sulfur, the 2-aminothiophene derivatives (4a, 4b) are formed under basic conditions. The solvent-free reaction of thiophene derivative 4a with ethyl cyanoacetate afforded thieno[2,3-d][1,3]oxazine derivative 6. The base catalyzed condensation of 2-aminothiophene derivative (4a) with ethyl cyanoacetate afforded N-(thieno-2-yl) cyanoacetamide derivative 7. The latter was used to synthesize different heterocyclic derivatives comprising, pyridine and coumarin rings. Also, several substituted thieno[2,3-d]pyrimidines have been prepared from reaction of 2-aminothiophene-3-carbonitrile 4b with some electrophilic reagents. The structure of the newly compounds were confirmed on the basis of elemental analysis and spectral data. The molecular modeling of the synthesized compounds has been drawn and their molecular parameters were calculated. Also, valuable information is obtained from calculation of the molecular parameters including electronegativity, net dipole moment of the compounds, total energy, electronic energy, binding energy, HOMO and LUMO energy. Evaluation of anti-inflammatory activity of the tested compounds was performed in albino rats by producing carrageenan induced paw oedema and measuring the zone of inflammation at different time intervals i.e. 1, 2, 3 and 4 h after carrageenan injection. Results indicated that most of the tested compounds showed moderate to good activity comparable to indomethacin. Also, compound 16 with additional morpholine ring beside the thiophene ring inhibits carrageenan induced paw oedema more than the standard indomethacin drug at all the time scales studied. Thus, compound 16 is considered as a promising compound for further modification to obtain clinically useful anti-inflammatory agent.

  1. Intercomparison measurements with energy deposition spectrometer Liulin and TEPC Hawk at HIMAC, and related calculations with PHITS

    NASA Astrophysics Data System (ADS)

    Ploc, Ondrej; Uchihori, Yukio; Kitamura, H.; Kodaira, S.; Dachev, Tsvetan; Spurny, Frantisek; Jadrnickova, Iva; Mrazova, Zlata; Kubancak, Jan

    Liulin type detectors are recently used in a wide range of cosmic radiation measurements, e.g. at alpine observatories, onboard aircrafts and spacecrafts. They provide energy deposition spectra up to 21 MeV, higher energy deposition events are stored in the last (overflow) channel. Their main advantages are portability (about the same size as a pack of cigarettes) and ability to record spectra as a function of time, so they can be used as personal dosimeters. Their well-known limitations are: (i) the fact that they are not tissue equivalent, (ii) they can be used as LET spectrometer only under specific conditions (e.g. broad parallel beam), and (iii) that the energy deposition event from particles of LETH20¿35 keV/µm is stored in the overflow bin only so the spectral information is missing. Tissue equivalent proportional counter (TEPC) Hawk has no of these limitations but on the other hand, it cannot be used as personal dosimeter because of its big size (cylinder of 16 cm diameter and 34 cm long). An important fraction of dose equivalent onboard spacecrafts is caused by heavy ions. This contribution presents results from intercomparison measurements with Liulin and Hawk at Heavy Ion Medical Accelerator in Chiba (HIMAC) and cyclotron beams, and related calculations with PHITS (Particle and Heavy-ion Transport code System). Following particles/ions and energies were used: protons 70 MeV, He 150 MeV, Ne 400 MeV, C 135 MeV, C 290 MeV, and Fe 500 MeV. Calculations of LET spectra by PHITS were performed for both, Liulin and Hawk. In case of Liulin, the dose equivalent was calculated using simulations in which several tissue equivalent materials were used as active volume instead of the silicon diode. Dose equivalents calculated in such way was compared with that measured with Hawk. LET spectra measured with Liulin and Hawk were compared for each ion at several points behind binary filters along the Brag curve. Good agreement was observed for some configurations; for

  2. Solar Energy Education. Renewable energy activities for earth science

    SciTech Connect

    Not Available

    1980-01-01

    A teaching manual is provided to aid teachers in introducing renewable energy topics to earth science students. The main emphasis is placed on solar energy. Activities for the student include a study of the greenhouse effect, solar gain for home heating, measuring solar radiation, and the construction of a model solar still to obtain fresh water. Instructions for the construction of apparatus to demonstrate a solar still, the greenhouse effect and measurement of the altitude and azimuth of the sun are included. (BCS)

  3. Identifying low variance pathways for free energy calculations of molecular transformations in solution phase

    NASA Astrophysics Data System (ADS)

    Pham, Tri T.; Shirts, Michael R.

    2011-07-01

    Improving the efficiency of free energy calculations is important for many biological and materials design applications, such as protein-ligand binding affinities in drug design, partitioning between immiscible liquids, and determining molecular association in soft materials. We show that for any pair potential, moderately accurate estimation of the radial distribution function for a solute molecule is sufficient to accurately estimate the statistical variance of a sampling along a free energy pathway. This allows inexpensive analytical identification of low statistical error free energy pathways. We employ a variety of methods to estimate the radial distribution function (RDF) and find that the computationally cheap two-body "dilute gas" limit performs as well or better than 3D-RISM theory and other approximations for identifying low variance free energy pathways. With a RDF estimate in hand, we can search for pairwise interaction potentials that produce low variance. We give an example of a search minimizing statistical variance of solvation free energy over the entire parameter space of a generalized "soft core" potential. The free energy pathway arising from this optimization procedure has lower curvature in the variance and reduces the total variance by at least 50% compared to the traditional soft core solvation pathway. We also demonstrate that this optimized pathway allows free energies to be estimated with fewer intermediate states due to its low curvature. This free energy variance optimization technique is generalizable to solvation in any homogeneous fluid and for any type of pairwise potential and can be performed in minutes to hours, depending on the method used to estimate g(r).

  4. Absolute Binding Free Energy Calculations: On the Accuracy of Computational Scoring of Protein-ligand Interactions

    PubMed Central

    Singh, Nidhi; Warshel, Arieh

    2010-01-01

    Calculating the absolute binding free energies is a challenging task. Reliable estimates of binding free energies should provide a guide for rational drug design. It should also provide us with deeper understanding of the correlation between protein structure and its function. Further applications may include identifying novel molecular scaffolds and optimizing lead compounds in computer-aided drug design. Available options to evaluate the absolute binding free energies range from the rigorous but expensive free energy perturbation to the microscopic Linear Response Approximation (LRA/β version) and its variants including the Linear Interaction Energy (LIE) to the more approximated and considerably faster scaled Protein Dipoles Langevin Dipoles (PDLD/S-LRA version), as well as the less rigorous Molecular Mechanics Poisson–Boltzmann/Surface Area (MM/PBSA) and Generalized Born/Surface Area (MM/GBSA) to the less accurate scoring functions. There is a need for an assessment of the performance of different approaches in terms of computer time and reliability. We present a comparative study of the LRA/β, the LIE, the PDLD/S-LRA/β and the more widely used MM/PBSA and assess their abilities to estimate the absolute binding energies. The LRA and LIE methods perform reasonably well but require specialized parameterization for the non-electrostatic term. On the average, the PDLD/S-LRA/β performs effectively. Our assessment of the MM/PBSA is less optimistic. This approach appears to provide erroneous estimates of the absolute binding energies due to its incorrect entropies and the problematic treatment of electrostatic energies. Overall, the PDLD/S-LRA/β appears to offer an appealing option for the final stages of massive screening approaches. PMID:20186976

  5. Computational methods for reactive transport modeling: A Gibbs energy minimization approach for multiphase equilibrium calculations

    NASA Astrophysics Data System (ADS)

    Leal, Allan M. M.; Kulik, Dmitrii A.; Kosakowski, Georg

    2016-02-01

    We present a numerical method for multiphase chemical equilibrium calculations based on a Gibbs energy minimization approach. The method can accurately and efficiently determine the stable phase assemblage at equilibrium independently of the type of phases and species that constitute the chemical system. We have successfully applied our chemical equilibrium algorithm in reactive transport simulations to demonstrate its effective use in computationally intensive applications. We used FEniCS to solve the governing partial differential equations of mass transport in porous media using finite element methods in unstructured meshes. Our equilibrium calculations were benchmarked with GEMS3K, the numerical kernel of the geochemical package GEMS. This allowed us to compare our results with a well-established Gibbs energy minimization algorithm, as well as their performance on every mesh node, at every time step of the transport simulation. The benchmark shows that our novel chemical equilibrium algorithm is accurate, robust, and efficient for reactive transport applications, and it is an improvement over the Gibbs energy minimization algorithm used in GEMS3K. The proposed chemical equilibrium method has been implemented in Reaktoro, a unified framework for modeling chemically reactive systems, which is now used as an alternative numerical kernel of GEMS.

  6. Configurational space discretization and free energy calculation in complex molecular systems

    NASA Astrophysics Data System (ADS)

    Wang, Kai; Long, Shiyang; Tian, Pu

    2016-03-01

    We sought to design a free energy calculation scheme with the hope of saving cost for generating dynamical information that is inherent in trajectories. We demonstrated that snapshots in a converged trajectory set are associated with implicit conformers that have invariant statistical weight distribution (ISWD). Since infinite number of sets of implicit conformers with ISWD may be created through independent converged trajectory sets, we hypothesized that explicit conformers with ISWD may be constructed for complex molecular systems through systematic increase of conformer fineness, and tested the hypothesis in lipid molecule palmitoyloleoylphosphatidylcholine (POPC). Furthermore, when explicit conformers with ISWD were utilized as basic states to define conformational entropy, change of which between two given macrostates was found to be equivalent to change of free energy except a mere difference of a negative temperature factor, and change of enthalpy essentially cancels corresponding change of average intra-conformer entropy. By implicitly taking advantage of entropy enthalpy compensation and forgoing all dynamical information, constructing explicit conformers with ISWD and counting thermally accessible number of which for interested end macrostates is likely to be an efficient and reliable alternative end point free energy calculation strategy.

  7. Configurational space discretization and free energy calculation in complex molecular systems.

    PubMed

    Wang, Kai; Long, Shiyang; Tian, Pu

    2016-01-01

    We sought to design a free energy calculation scheme with the hope of saving cost for generating dynamical information that is inherent in trajectories. We demonstrated that snapshots in a converged trajectory set are associated with implicit conformers that have invariant statistical weight distribution (ISWD). Since infinite number of sets of implicit conformers with ISWD may be created through independent converged trajectory sets, we hypothesized that explicit conformers with ISWD may be constructed for complex molecular systems through systematic increase of conformer fineness, and tested the hypothesis in lipid molecule palmitoyloleoylphosphatidylcholine (POPC). Furthermore, when explicit conformers with ISWD were utilized as basic states to define conformational entropy, change of which between two given macrostates was found to be equivalent to change of free energy except a mere difference of a negative temperature factor, and change of enthalpy essentially cancels corresponding change of average intra-conformer entropy. By implicitly taking advantage of entropy enthalpy compensation and forgoing all dynamical information, constructing explicit conformers with ISWD and counting thermally accessible number of which for interested end macrostates is likely to be an efficient and reliable alternative end point free energy calculation strategy. PMID:26974524

  8. Configurational space discretization and free energy calculation in complex molecular systems

    PubMed Central

    Wang, Kai; Long, Shiyang; Tian, Pu

    2016-01-01

    We sought to design a free energy calculation scheme with the hope of saving cost for generating dynamical information that is inherent in trajectories. We demonstrated that snapshots in a converged trajectory set are associated with implicit conformers that have invariant statistical weight distribution (ISWD). Since infinite number of sets of implicit conformers with ISWD may be created through independent converged trajectory sets, we hypothesized that explicit conformers with ISWD may be constructed for complex molecular systems through systematic increase of conformer fineness, and tested the hypothesis in lipid molecule palmitoyloleoylphosphatidylcholine (POPC). Furthermore, when explicit conformers with ISWD were utilized as basic states to define conformational entropy, change of which between two given macrostates was found to be equivalent to change of free energy except a mere difference of a negative temperature factor, and change of enthalpy essentially cancels corresponding change of average intra-conformer entropy. By implicitly taking advantage of entropy enthalpy compensation and forgoing all dynamical information, constructing explicit conformers with ISWD and counting thermally accessible number of which for interested end macrostates is likely to be an efficient and reliable alternative end point free energy calculation strategy. PMID:26974524

  9. Free Energy Calculations for DNA Near Surfaces Using an Ellipsoidal Geometry

    PubMed Central

    Ambia-Garrido, J.; Pettitt, B. Montgomery

    2009-01-01

    The change in some thermodynamic quantities such as Gibbs' free energy, entropy and enthalpy of the binding of two DNA strands (forming a double helix), while one is tethered to a surface and are analytically calculated. These particles are submerged in an electrolytic solution; the ionic strength of the media allows the linearized version of the Poisson-Boltzmann equation (from the theory of the double layer interaction) to properly describe the interactions [13]. There is experimental and computational evidence that an ion penetrable ellipsoid is an adequate model for the single strand and the double helix [22–25]. The analytic solution provides simple calculations useful for DNA chip design. The predicted electrostatic effects suggest the feasibility of electronic control and detection of DNA hybridization in the fast growing area of DNA recognition. PMID:20011625

  10. Density functional theory calculations of magnetocrystalline anisotropy energies for (Fe1-xCox)2B

    DOE PAGES

    Daene, Markus; Kim, Soo Kyung; Surh, Michael P.; Aberg, Daniel; Benedict, Lorin X.

    2015-06-15

    We present and discuss density functional theory calculations of magnetic properties of the family of ferromagnetic compounds, (Fe1-xCox)2B, focusing specifically on the magnetocrystalline anisotropy energy (MAE). Using periodic supercells of various sizes (up to 96 atoms), it is shown that the general qualitative features of the composition dependence of the MAE is in agreement with experimental findings, while our predicted magnitudes are larger than those of experiment. We find that the use of small supercells (6 and 12-atom) favors larger MAE values relative to a statistical sample of configurations constructed with 96-atom supercells. As a result, the effect of latticemore » relaxations is shown to be small. Calculations of the Curie temperature for this alloy are also presented.« less

  11. Calculation of Zeeman splitting and Zeeman transition energies of spherical quantum dot in uniform magnetic field

    NASA Astrophysics Data System (ADS)

    Çakır, Bekir; Atav, Ülfet; Yakar, Yusuf; Özmen, Ayhan

    2016-08-01

    In this study we report a detailed theoretical investigation of the effect of an external magnetic field on the 1s-, 2p-, 3d- and 4f-energy states of a spherical quantum dot. We treat the contribution of the diamagnetic term as a perturbation and discuss the effect of the diamagnetic term on the 1s-, 2p-, 3d- and 4f-energy states. We also have calculated the Zeeman transition energies between 2p → 1s and 3d → 2p states with m = 0, ±1 and 0, ±1, ±2 as a function of dot radius and the magnetic field strength. The results show that the magnetic field, impurity charge and dot radius have a strong influence on the energy states and the Zeeman transitions. It is found that the energies of the electronic states with m < 0 addition of the diamagnetic term firstly decrease toward a minimum, and then increase with the increasing magnetic field strength. We have seen that as magnetic field intensity is adjusted, frequency of the emitted light can be changed for Zeeman transitions.

  12. Hydrophobic Interactions Are a Key to MDM2 Inhibition by Polyphenols as Revealed by Molecular Dynamics Simulations and MM/PBSA Free Energy Calculations.

    PubMed

    Verma, Sharad; Grover, Sonam; Tyagi, Chetna; Goyal, Sukriti; Jamal, Salma; Singh, Aditi; Grover, Abhinav

    2016-01-01

    p53, a tumor suppressor protein, has been proven to regulate the cell cycle, apoptosis, and DNA repair to prevent malignant transformation. MDM2 regulates activity of p53 and inhibits its binding to DNA. In the present study, we elucidated the MDM2 inhibition potential of polyphenols (Apigenin, Fisetin, Galangin and Luteolin) by MD simulation and MM/PBSA free energy calculations. All polyphenols bind to hydrophobic groove of MDM2 and the binding was found to be stable throughout MD simulation. Luteolin showed the highest negative binding free energy value of -173.80 kJ/mol followed by Fisetin with value of -172.25 kJ/mol. It was found by free energy calculations, that hydrophobic interactions (vdW energy) have major contribution in binding free energy.

  13. Hydrophobic Interactions Are a Key to MDM2 Inhibition by Polyphenols as Revealed by Molecular Dynamics Simulations and MM/PBSA Free Energy Calculations.

    PubMed

    Verma, Sharad; Grover, Sonam; Tyagi, Chetna; Goyal, Sukriti; Jamal, Salma; Singh, Aditi; Grover, Abhinav

    2016-01-01

    p53, a tumor suppressor protein, has been proven to regulate the cell cycle, apoptosis, and DNA repair to prevent malignant transformation. MDM2 regulates activity of p53 and inhibits its binding to DNA. In the present study, we elucidated the MDM2 inhibition potential of polyphenols (Apigenin, Fisetin, Galangin and Luteolin) by MD simulation and MM/PBSA free energy calculations. All polyphenols bind to hydrophobic groove of MDM2 and the binding was found to be stable throughout MD simulation. Luteolin showed the highest negative binding free energy value of -173.80 kJ/mol followed by Fisetin with value of -172.25 kJ/mol. It was found by free energy calculations, that hydrophobic interactions (vdW energy) have major contribution in binding free energy. PMID:26863418

  14. Hydrophobic Interactions Are a Key to MDM2 Inhibition by Polyphenols as Revealed by Molecular Dynamics Simulations and MM/PBSA Free Energy Calculations

    PubMed Central

    Verma, Sharad; Grover, Sonam; Tyagi, Chetna; Goyal, Sukriti; Jamal, Salma; Singh, Aditi; Grover, Abhinav

    2016-01-01

    p53, a tumor suppressor protein, has been proven to regulate the cell cycle, apoptosis, and DNA repair to prevent malignant transformation. MDM2 regulates activity of p53 and inhibits its binding to DNA. In the present study, we elucidated the MDM2 inhibition potential of polyphenols (Apigenin, Fisetin, Galangin and Luteolin) by MD simulation and MM/PBSA free energy calculations. All polyphenols bind to hydrophobic groove of MDM2 and the binding was found to be stable throughout MD simulation. Luteolin showed the highest negative binding free energy value of -173.80 kJ/mol followed by Fisetin with value of -172.25 kJ/mol. It was found by free energy calculations, that hydrophobic interactions (vdW energy) have major contribution in binding free energy. PMID:26863418

  15. Conservation Activities Related to Energy: Energy Activities for Urban Elementary Students, K-6.

    ERIC Educational Resources Information Center

    Schmidt, Joan S.; And Others

    Presented are simple activities, experiments, and demonstrations relating to energy conservation in the home. Activities are divided into four areas: (1) kitchen, (2) house, (3) transportation, and (4) heating and cooling. The material has been designed to require a minimum of preparation. Activity and game masters are provided. Activities may be…

  16. Angular-overlap calculation of the Jahn-Teller stabilization energie for f-orbital degeneracies

    SciTech Connect

    Warren, K.D.

    1980-03-01

    The angular-overlap model is applied to the calculation of the linear Jahn-Teller coupling constants for f-orbital degeneracies. The MX/sub 6/, O/sub h/, chromophore is treated as representative of the highest symmetry commonly occurring in the lanthanide and actinide series, and it is shown that, even when spin-orbit effects are taken into account, 5f orbital degeneracies may lead to significant Jahn-Teller stabilization energies. The operation of this effect for F/sup 1/ GAMMA/sub 8/ states is considered. 2 tables.

  17. Calculation tool for transported geothermal energy using two-step absorption process

    DOE Data Explorer

    Kyle Gluesenkamp

    2016-02-01

    This spreadsheet allows the user to calculate parameters relevant to techno-economic performance of a two-step absorption process to transport low temperature geothermal heat some distance (1-20 miles) for use in building air conditioning. The parameters included are (1) energy density of aqueous LiBr and LiCl solutions, (2) transportation cost of trucking solution, and (3) equipment cost for the required chillers and cooling towers in the two-step absorption approach. More information is available in the included public report: "A Technical and Economic Analysis of an Innovative Two-Step Absorption System for Utilizing Low-Temperature Geothermal Resources to Condition Commercial Buildings"

  18. A Method for the Calculation of Lattice Energies of Complex Crystals with Application to the Oxides of Molybdenum

    NASA Technical Reports Server (NTRS)

    Chaney, William S.

    1961-01-01

    A theoretical study has been made of molybdenum dioxide and molybdenum trioxide in order to extend the knowledge of factors Involved in the oxidation of molybdenum. New methods were developed for calculating the lattice energies based on electrostatic valence theory, and the coulombic, polarization, Van der Waals, and repulsion energie's were calculated. The crystal structure was examined and structure details were correlated with lattice energy.

  19. Roadmaps through free energy landscapes calculated using the multi-dimensional vFEP approach

    PubMed Central

    Radak, Brian K.; Huang, Ming; Wong, Kin-Yiu

    2014-01-01

    The variational free energy profile (vFEP) method is extended to two dimensions and tested with molecular simulation applications. The proposed 2D-vFEP approach effectively addresses the two major obstacles to constructing free energy profiles from simulation data using traditional methods: the need for overlap in the re-weighting procedure and the problem of data representation. This is especially evident as these problems are shown to be more severe in two dimensions. The vFEP method is demonstrated to be highly robust and able to provide stable, analytic free energy profiles with only a paucity of sampled data. The analytic profiles can be analyzed with conventional search methods to easily identify stationary points (e.g. minima and first-order saddle points) as well as the pathways that connect these points. These “roadmaps” through the free energy surface are useful not only as a post-processing tool to characterize mechanisms, but can also serve as a basis from which to direct more focused “on-the-fly” sampling or adaptive force biasing. Test cases demonstrate that 2D-vFEP outperforms other methods in terms of the amount and sparsity of the data needed to construct stable, converged analytic free energy profiles. In a classic test case, the two dimensional free energy profile of the backbone torsion angles of alanine dipeptide, 2D-vFEP needs less than 1% of the original data set to reach a sampling accuracy of 0.5 kcal/mol in free energy shifts between windows. A new software tool for performing one and two dimensional vFEP calculations is herein described and made publicly available. PMID:24505217

  20. Roadmaps through free energy landscapes calculated using the multi-dimensional vFEP approach.

    PubMed

    Lee, Tai-Sung; Radak, Brian K; Huang, Ming; Wong, Kin-Yiu; York, Darrin M

    2014-01-14

    The variational free energy profile (vFEP) method is extended to two dimensions and tested with molecular simulation applications. The proposed 2D-vFEP approach effectively addresses the two major obstacles to constructing free energy profiles from simulation data using traditional methods: the need for overlap in the re-weighting procedure and the problem of data representation. This is especially evident as these problems are shown to be more severe in two dimensions. The vFEP method is demonstrated to be highly robust and able to provide stable, analytic free energy profiles with only a paucity of sampled data. The analytic profiles can be analyzed with conventional search methods to easily identify stationary points (e.g. minima and first-order saddle points) as well as the pathways that connect these points. These "roadmaps" through the free energy surface are useful not only as a post-processing tool to characterize mechanisms, but can also serve as a basis from which to direct more focused "on-the-fly" sampling or adaptive force biasing. Test cases demonstrate that 2D-vFEP outperforms other methods in terms of the amount and sparsity of the data needed to construct stable, converged analytic free energy profiles. In a classic test case, the two dimensional free energy profile of the backbone torsion angles of alanine dipeptide, 2D-vFEP needs less than 1% of the original data set to reach a sampling accuracy of 0.5 kcal/mol in free energy shifts between windows. A new software tool for performing one and two dimensional vFEP calculations is herein described and made publicly available.

  1. Balanced Basis Sets in the Calculation of Potential Energy Curves for Diatomic Molecules.

    NASA Astrophysics Data System (ADS)

    Barclay, V. J.

    "Balanced" basis sets, which describe the internuclear region as well as the nuclear region, are examined in the context of an ab initio selection-extrapolation configuration -interaction method (MRD-CI). The sets are balanced by adding bond functions (BF's), which are s, p and d-type orbitals at the bond mid-point, to atomic-centred molecular basis sets, which have double and triple sets of valence -shell orbitals (DZ and TZ) and one or two sets of polarization functions (PF's). Potential energy curves and spectroscopic constants were calculated for the ground states of the hydrides H _2, OH, NaH, MgH, MH, SiH, PH, SH, HCl, and for the ionized species OH^+ and OH^{++}, and for the A^3Sigma_{u}, w^3Delta_{u} and B^3Pi_{g} excited states of N_2. The basis sets containing bond functions gave curves and constants superior to the DZP and (where calculated) TZPP results, and of quality similar to large basis set calculations in the literature. The single and double ionization potentials of OH, and the term energies of the N_2 excited states had error at the atomic asymptotes for all basis sets. The dissociation energies of the ground states of ten first-row diatomics (C_2, N_2, O_2, F_2, CN, CO, CF, NO, NF, and FO) were studied using balanced basis sets. A correlation was found to exist between the actual bond order of a species, and the number and kinds of orbitals which comprise the optimum BF. For MRD-CI diatomic calculations, the following BF's should be added to a DZP basis set (sp) (for a bond order of 1); 2(sp) (B. O. 1.5); (spd) (B. O. 2); 3(sp) (B. O. 2.5); 2(spd) (B. O. 3). The prescribed BF basis method was tested on the 26 second-row congeners Si _2, P_2, S _2, Cl_2, SiP, SiS, SiCl, PS, PCl, and ClS, and mixed-row congeners SiN, SiO, SiF, PO, PF, SF, SiC, PN, SO, ClF, CP, CS, CCl, NS, NCl, and ClO. An average error of 6% and a maximum error of 10% relative to known experimental D_{e }'s was found: compared to an average error of 18% for TZPP calculations

  2. Magnetic helicity and free energy in solar active regions

    NASA Astrophysics Data System (ADS)

    Moraitis, K.; Georgoulis, M.; Tziotziou, K.; Archontis, V.

    2013-09-01

    We study the evolution of the non-potential free magnetic energy and relative magnetic helicity budgets in solar active regions (ARs). For this we use a time-series of a three-dimensional, synthetic AR produced by magnetohydrodynamical (MHD) simulations. As a first step, we calculate the potential magnetic field that has the same normal components with the MHD field along all boundaries of the AR, by solving Laplace's equation. The free magnetic energy of the AR is then easily derived. From the two fields, MHD and potential one, we calculate the corresponding vector potentials with a recently proposed integration method. The knowledge of both fields and their respective vector potentials throughout the AR, allows us to estimate the relative magnetic helicity budget of the AR. Following this procedure for each snapshot of the AR, we reconstruct the evolution of free energy and helicity in the AR. Our method reproduces, for a synthetic AR, the energy/helicity relations known to hold in real active regions.

  3. Initial energy partitioning and some excavation stage phenomenology in laboratory-scale cratering calculations in clay

    NASA Technical Reports Server (NTRS)

    Austin, M. G.; Thomsen, J. M.; Ruhl, S. F.

    1982-01-01

    One impact and two explosive cratering calculations have been analyzed with emphasis on the early excavation stage. The early excavation stage is here defined as that part of the excavation stage that occurs after energy partitioning is 90% complete, but before the cratering flow field can be well described by Z-type flow fields with values of Z uniformly greater than two. Impact generated flow fields seem to have a much longer early excavation stage than explosion generated flow fields, due possibly to the slower momentum transfer versus energy transfer rate between projectile and target. During this time when the projectile retains a significant portion of its original momentum, Z values less than two are observed in the impact generated flow field. Z values less than two are not observed at any time in the explosion generated flow fields.

  4. Calculation of energy relaxation rates of fast particles by phonons in crystals

    NASA Astrophysics Data System (ADS)

    Prange, Micah; Campbell, Luke; Wu, Dangxin; Kerisit, Sebastien

    2015-03-01

    We present ab initio calculations of the temperature-dependent exchange of energy between a classical charged point-particle and the phonons of a crystalline material. The phonons, which are computed using density functional perturbation theory (DFPT) methods, interact with the moving particle via the Coulomb interaction between the density induced in the material by phonon excitation and the charge of the classical particle. Energy relaxation rates are computed using time-dependent perturbation theory. The method, which is applicable wherever DFPT is, is illustrated with results for several important scintillators whose performance is affected by electron thermalization. We discuss the influence of the form assumed for quasiparticle dispersion on theoretical estimates of electron cooling rates. This research was supported by the National Nuclear Security Administration, Office of DNN R&D, of the DOE. PNNL is operated by Battelle Memorial Institute under Contract DE-AC0576RL01830.

  5. Parameter-free calculation of charge-changing cross sections at high energy

    NASA Astrophysics Data System (ADS)

    Suzuki, Y.; Horiuchi, W.; Terashima, S.; Kanungo, R.; Ameil, F.; Atkinson, J.; Ayyad, Y.; Cortina-Gil, D.; Dillmann, I.; Estradé, A.; Evdokimov, A.; Farinon, F.; Geissel, H.; Guastalla, G.; Janik, R.; Knoebel, R.; Kurcewicz, J.; Litvinov, Yu. A.; Marta, M.; Mostazo, M.; Mukha, I.; Nociforo, C.; Ong, H. J.; Pietri, S.; Prochazka, A.; Scheidenberger, C.; Sitar, B.; Strmen, P.; Takechi, M.; Tanaka, J.; Tanihata, I.; Vargas, J.; Weick, H.; Winfield, J. S.

    2016-07-01

    Charge-changing cross sections at high energies are expected to provide useful information on nuclear charge radii. No reliable theory to calculate the cross section has yet been available. We develop a formula using Glauber and eikonal approximations and test its validity with recent new data on carbon isotopes measured at around 900 A MeV. We first confirm that our theory reproduces the cross sections of 12,13,14C+12C consistently with the known charge radii. Next we show that the cross sections of C-1912 on a proton target are all well reproduced provided the role of neutrons is accounted for. We also discuss the energy dependence of the charge-changing cross sections.

  6. Accurate calculations of the hydration free energies of druglike molecules using the reference interaction site model.

    PubMed

    Palmer, David S; Sergiievskyi, Volodymyr P; Jensen, Frank; Fedorov, Maxim V

    2010-07-28

    We report on the results of testing the reference interaction site model (RISM) for the estimation of the hydration free energy of druglike molecules. The optimum model was selected after testing of different RISM free energy expressions combined with different quantum mechanics and empirical force-field methods of structure optimization and atomic partial charge calculation. The final model gave a systematic error with a standard deviation of 2.6 kcal/mol for a test set of 31 molecules selected from the SAMPL1 blind challenge set [J. P. Guthrie, J. Phys. Chem. B 113, 4501 (2009)]. After parametrization of this model to include terms for the excluded volume and the number of atoms of different types in the molecule, the root mean squared error for a test set of 19 molecules was less than 1.2 kcal/mol.

  7. Energy from CO2 using capacitive electrodes--theoretical outline and calculation of open circuit voltage.

    PubMed

    Paz-Garcia, J M; Schaetzle, O; Biesheuvel, P M; Hamelers, H V M

    2014-03-15

    Recently, a new technology has been proposed for the utilization of energy from CO2 emissions (Hamelers et al., 2014). The principle consists of controlling the dilution process of CO2-concentrated gas (e.g., exhaust gas) into CO2-dilute gas (e.g., air) thereby extracting a fraction of the released mixing energy. In this paper, we describe the theoretical fundamentals of this technology when using a pair of charge-selective capacitive electrodes. We focus on the behavior of the chemical system consisting of CO2 gas dissolved in water or monoethanolamine solution. The maximum voltage given for the capacitive cell is theoretically calculated, based on the membrane potential. The different aspects that affect this theoretical maximum value are discussed.

  8. Calculation of energy relaxation rates of fast particles by phonons in crystals

    SciTech Connect

    Prange, Micah P.; Campbell, Luke W.; Wu, Dangxin; Gao, Fei; Kerisit, Sebastien N.

    2015-03-01

    We present ab initio calculations of the temperature-dependent exchange of energy between a classical charged point-particle and the phonons of a crystalline material. The phonons, which are computed using density functional perturbation theory (DFPT) methods, interact with the mov- ing particle via the Coulomb interaction between the density induced in the material by phonon excitation and the charge of the classical particle. Energy relaxation rates are computed using time- dependent perturbation theory. The method, which is applicable wherever DFPT is, is illustrated with results for CsI, an important scintillator whose performance is affected by electron thermal- ization. We discuss the influence of the form assumed for quasiparticle dispersion on theoretical estimates of electron cooling rates.

  9. GEDAE-LaB: A Free Software to Calculate the Energy System Contributions during Exercise

    PubMed Central

    Bertuzzi, Rômulo; Melegati, Jorge; Bueno, Salomão; Ghiarone, Thaysa; Pasqua, Leonardo A.; Gáspari, Arthur Fernandes; Lima-Silva, Adriano E.; Goldman, Alfredo

    2016-01-01

    Purpose The aim of the current study is to describe the functionality of free software developed for energy system contributions and energy expenditure calculation during exercise, namely GEDAE-LaB. Methods Eleven participants performed the following tests: 1) a maximal cycling incremental test to measure the ventilatory threshold and maximal oxygen uptake (V˙O2max); 2) a cycling workload constant test at moderate domain (90% ventilatory threshold); 3) a cycling workload constant test at severe domain (110% V˙O2max). Oxygen uptake and plasma lactate were measured during the tests. The contributions of the aerobic (AMET), anaerobic lactic (LAMET), and anaerobic alactic (ALMET) systems were calculated based on the oxygen uptake during exercise, the oxygen energy equivalents provided by lactate accumulation, and the fast component of excess post-exercise oxygen consumption, respectively. In order to assess the intra-investigator variation, four different investigators performed the analyses independently using GEDAE-LaB. A direct comparison with commercial software was also provided. Results All subjects completed 10 min of exercise at moderate domain, while the time to exhaustion at severe domain was 144 ± 65 s. The AMET, LAMET, and ALMET contributions during moderate domain were about 93, 2, and 5%, respectively. The AMET, LAMET, and ALMET contributions during severe domain were about 66, 21, and 13%, respectively. No statistical differences were found between the energy system contributions and energy expenditure obtained by GEDAE-LaB and commercial software for both moderate and severe domains (P > 0.05). The ICC revealed that these estimates were highly reliable among the four investigators for both moderate and severe domains (all ICC ≥ 0.94). Conclusion These findings suggest that GEDAE-LaB is a free software easily comprehended by users minimally familiarized with adopted procedures for calculations of energetic profile using oxygen uptake and lactate

  10. Application of the Activity-Based Costing Method for Unit-Cost Calculation in a Hospital

    PubMed Central

    Javid, Mahdi; Hadian, Mohammad; Ghaderi, Hossein; Ghaffari, Shahram; Salehi, Masoud

    2016-01-01

    Background: Choosing an appropriate accounting system for hospital has always been a challenge for hospital managers. Traditional cost system (TCS) causes cost distortions in hospital. Activity-based costing (ABC) method is a new and more effective cost system. Objective: This study aimed to compare ABC with TCS method in calculating the unit cost of medical services and to assess its applicability in Kashani Hospital, Shahrekord City, Iran. Methods: This cross-sectional study was performed on accounting data of Kashani Hospital in 2013. Data on accounting reports of 2012 and other relevant sources at the end of 2012 were included. To apply ABC method, the hospital was divided into several cost centers and five cost categories were defined: wage, equipment, space, material, and overhead costs. Then activity centers were defined. ABC method was performed into two phases. First, the total costs of cost centers were assigned to activities by using related cost factors. Then the costs of activities were divided to cost objects by using cost drivers. After determining the cost of objects, the cost price of medical services was calculated and compared with those obtained from TCS. Results: The Kashani Hospital had 81 physicians, 306 nurses, and 328 beds with the mean occupancy rate of 67.4% during 2012. Unit cost of medical services, cost price of occupancy bed per day, and cost per outpatient service were calculated. The total unit costs by ABC and TCS were respectively 187.95 and 137.70 USD, showing 50.34 USD more unit cost by ABC method. ABC method represented more accurate information on the major cost components. Conclusion: By utilizing ABC, hospital managers have a valuable accounting system that provides a true insight into the organizational costs of their department. PMID:26234974

  11. Full dimension Rb2He ground triplet potential energy surface and quantum scattering calculations.

    PubMed

    Guillon, Grégoire; Viel, Alexandra; Launay, Jean-Michel

    2012-05-01

    We have developed a three-dimensional potential energy surface for the lowest triplet state of the Rb(2)He complex. A global analytic fit is provided as in the supplementary material [see supplementary material at http://dx.doi.org/10.1063/1.4709433 for the corresponding Fortran code]. This surface is used to perform quantum scattering calculations of (4)He and (3)He colliding with (87)Rb(2) in the partial wave J = 0 at low and ultralow energies. For the heavier helium isotope, the computed vibrational relaxation probabilities show a broad and strong shape resonance for a collisional energy of 0.15 K and a narrow Feshbach resonance at about 17 K for all initial Rb(2) vibrational states studied. The broad resonance corresponds to an efficient relaxation mechanism that does not occur when (3)He is the colliding partner. The Feshbach resonance observed at higher collisional energy is robust with respect to the isotopic substitution. However, its effect on the vibrational relaxation mechanism is faint for both isotopes. PMID:22583230

  12. Rigorous calculation of electric field effects on the free energy change of the electron transfer reaction

    NASA Astrophysics Data System (ADS)

    Seki, Kazuhiko; Traytak, S. D.; Tachiya, M.

    2003-01-01

    We theoretically investigate the effect of an external electric field on the free energy change of electron transfer reaction in polar solvents. The external electric field produces polarization both on the solutes and in the solvent. Since the polarization produced on the solute differs from that in the solvent, apparent surface charge is created on the surface of the solutes. The polarization charge on the surface of the solutes interacts with the charge associated with the electron transfer. The free energy change of the reaction including such effect is calculated rigorously. A simple formula is derived and compared to the exact result in the case of spherical solutes in the dielectric continuum media. Only slight deviations are observed for any values of the solvent polarity and of the ratio between the radii of the donor and the acceptor molecules. In addition, we also applied the same method to evaluate the reorganization energy rigorously: The Marcus expression for the reorganization energy is an approximate one. The accuracy of the Marcus expression is assessed by comparing it with the exact result.

  13. Calculation Of A Micro Discharge Energy Balance With PIC-MCC Method

    SciTech Connect

    Benstaali, W.; Belasri, A.; Hagelaar, G. J. M.; Boeuf, J. P.

    2008-09-23

    In this paper, we present a 1D Particle in Cell with Monte Carlo Collisions model, developed in order to calculate the energy balance in a micro-discharge, under conditions similar to those of a Plasma Display Panel (PDP) cell. The discharge takes place in a xenon-neon (10%-;90%) mixture at 560 torr and for a gap length of 100 {mu}m. The model is used to analyze in details the energy deposition during the discharge pulse. The results show the amount of energy dissipated by ions (collisions in the gas and on the cathode), by electrons (excitation of the different electronic states, ionization), and their variations with the applied voltage. This model will be used in the future to test the approximations of the fluid models which are generally used to optimize PDP operating conditions, and to check whether or not fluid models can correctly predict the trends in the variations of the energy balance with parameters such as voltage, pressure, gas mixture.

  14. Genetic Algorithms Application for the Photoacoustic Signal Temporal Shape Analysis and Energy Density Spatial Distribution Calculation

    NASA Astrophysics Data System (ADS)

    Lukić, M.; Ćojbašić, Ž.; Rabasović, M. D.; Markushev, D. D.; Todorović, D. M.

    2013-09-01

    Recently, a few numerical methods based on the photoacoustic (PA) signal temporal shape analysis and energy density spatial distribution calculation, which is directly related to the laser beam spatial profile, have been presented. It has been shown that these methods allow a precise reproduction of the spatial profile and the radius of the laser beam, determining the vibrational-to-translational (V-T) relaxation time with good accuracy. Their applicability has been shown and confirmed for the analysis of an arbitrary symmetric laser beam spatial profile in cylindrical geometry. Here, the application of genetic optimization for solving the problem of a simultaneous laser beam spatial profile and V-T relaxation time determination by pulsed PAs is presented. Real-coded genetic algorithms are used to calculate the mentioned relaxation time by fitting the experimental signal with the theoretical one. The aim is to find combinations of PA signal parameters, namely, the radius of the laser beam and the V-T relaxation time that provide the best match with the given signal. A calculated PA signal with a known profile is used to simulate an experimental signal, and the sum of the square deviations representing deviations of the given and fitted signals is minimized by means of genetic optimization. In that way, the genetic algorithms are used to simultaneously estimate the radius of the laser beam and the V-T relaxation time efficiently and with high accuracy. Compared to previous methods, the presented method is much simpler and requires less time to compute.

  15. Calculated ground state potential surface and excitation energies for the copper trimer

    NASA Technical Reports Server (NTRS)

    Walch, S. P.; Laskowski, B. C.

    1986-01-01

    In the context of their relevance to catalysis and to materials science problems, transition metals and transition metal (TM) compounds are currently of considerable interest, and studies have been conducted of the copper trimer, Cu3. The present investigation is concerned with a study of the ground state surface and several groups of excited states in order to improve the understanding of the spectroscopy of Cu3. Differences of the current study from previous investigations are related to an employment of larger basis sets and a more extensive electron correlation. This was done with the objective to obtain a more accurate definition of the ground state surface. Features of the bonding in the copper dimer are considered to obtain a basis for an understanding of the copper trimer. Attention is given to calculational details, the ground state surface, and calculated vertical excitation energies. The results of SCF/SDCI calculations are reported for portions of the ground surface, for two groups of excited states, and for the ionization potential of Cu3.

  16. Accurate Monte Carlo modeling of cyclotrons for optimization of shielding and activation calculations in the biomedical field

    NASA Astrophysics Data System (ADS)

    Infantino, Angelo; Marengo, Mario; Baschetti, Serafina; Cicoria, Gianfranco; Longo Vaschetto, Vittorio; Lucconi, Giulia; Massucci, Piera; Vichi, Sara; Zagni, Federico; Mostacci, Domiziano

    2015-11-01

    Biomedical cyclotrons for production of Positron Emission Tomography (PET) radionuclides and radiotherapy with hadrons or ions are widely diffused and established in hospitals as well as in industrial facilities and research sites. Guidelines for site planning and installation, as well as for radiation protection assessment, are given in a number of international documents; however, these well-established guides typically offer analytic methods of calculation of both shielding and materials activation, in approximate or idealized geometry set up. The availability of Monte Carlo codes with accurate and up-to-date libraries for transport and interactions of neutrons and charged particles at energies below 250 MeV, together with the continuously increasing power of nowadays computers, makes systematic use of simulations with realistic geometries possible, yielding equipment and site specific evaluation of the source terms, shielding requirements and all quantities relevant to radiation protection. In this work, the well-known Monte Carlo code FLUKA was used to simulate two representative models of cyclotron for PET radionuclides production, including their targetry; and one type of proton therapy cyclotron including the energy selection system. Simulations yield estimates of various quantities of radiological interest, including the effective dose distribution around the equipment, the effective number of neutron produced per incident proton and the activation of target materials, the structure of the cyclotron, the energy degrader, the vault walls and the soil. The model was validated against experimental measurements and comparison with well-established reference data. Neutron ambient dose equivalent H*(10) was measured around a GE PETtrace cyclotron: an average ratio between experimental measurement and simulations of 0.99±0.07 was found. Saturation yield of 18F, produced by the well-known 18O(p,n)18F reaction, was calculated and compared with the IAEA recommended

  17. Weather data for simplified energy calculation methods. Volume I. Eastern United States: TRY data

    SciTech Connect

    Olsen, A.R.; Moreno, S.; Deringer, J.; Watson, C.R.

    1984-08-01

    The objective of this report is to provide a source of weather data for direct use with a number of simplified energy calculation methods available today. Complete weather data for a number of cities in the United States are provided for use in the following methods: degree hour, modified degree hour, bin, modified bin, and variable degree day. This report contains sets of weather data for 23 cities in the continental United States using Test Reference Year (TRY) source weather data. The weather data at each city has been summarized in a number of ways to provide differing levels of detail necessary for alternative simplified energy calculation methods. Weather variables summarized include dry bulb and wet bulb temperature, percent relative humidity, humidity ratio, wind speed, percent possible sunshine, percent diffuse solar radiation, total solar radiation on horizontal and vertical surfaces, and solar heat gain through standard DSA glass. Monthly and annual summaries, in some cases by time of day, are available. These summaries are produced in a series of nine computer generated tables.

  18. Weather data for simplified energy calculation methods. Volume II. Middle United States: TRY data

    SciTech Connect

    Olsen, A.R.; Moreno, S.; Deringer, J.; Watson, C.R.

    1984-08-01

    The objective of this report is to provide a source of weather data for direct use with a number of simplified energy calculation methods available today. Complete weather data for a number of cities in the United States are provided for use in the following methods: degree hour, modified degree hour, bin, modified bin, and variable degree day. This report contains sets of weather data for 22 cities in the continental United States using Test Reference Year (TRY) source weather data. The weather data at each city has been summarized in a number of ways to provide differing levels of detail necessary for alternative simplified energy calculation methods. Weather variables summarized include dry bulb and wet bulb temperature, percent relative humidity, humidity ratio, wind speed, percent possible sunshine, percent diffuse solar radiation, total solar radiation on horizontal and vertical surfaces, and solar heat gain through standard DSA glass. Monthly and annual summaries, in some cases by time of day, are available. These summaries are produced in a series of nine computer generated tables.

  19. Weather data for simplified energy calculation methods. Volume III. Western United States: TRY data

    SciTech Connect

    Olsen, A.R.; Moreno, S.; Deringer, J.; Watson, C.R.

    1984-08-01

    The objective is to provide a source of weather data for direct use with a number of simplified energy calculation methods available today. Complete weather data for a number of cities in the United States are provided for use in the following methods: degree hour, modified degree hour, bin, modified bin, and variable degree day. This report contains sets of weather data for 24 cities in the continental United States using Test Reference Year (TRY) source weather data. The weather data at each city has been summarized in a number of ways to provide differing levels of detail necessary for alternative simplified energy calculation methods. Weather variables summarized include dry bulb and wet bulb temperature, percent relative humidity, humidity ratio, wind speed, percent possible sunshine, percent diffuse solar radiation, total solar radiation on horizontal and vertical surfaces, and solar heat gain through standard DSA glass. Monthly and annual summaries, in some cases by time of day, are available. These summaries are produced in a series of nine computer generated tables.

  20. Improving iterative surface energy balance convergence for remote sensing based flux calculation

    NASA Astrophysics Data System (ADS)

    Dhungel, Ramesh; Allen, Richard G.; Trezza, Ricardo

    2016-04-01

    A modification of the iterative procedure of the surface energy balance was purposed to expedite the convergence of Monin-Obukhov stability correction utilized by the remote sensing based flux calculation. This was demonstrated using ground-based weather stations as well as the gridded weather data (North American Regional Reanalysis) and remote sensing based (Landsat 5, 7) images. The study was conducted for different land-use classes in southern Idaho and northern California for multiple satellite overpasses. The convergence behavior of a selected Landsat pixel as well as all of the Landsat pixels within the area of interest was analyzed. Modified version needed multiple times less iteration compared to the current iterative technique. At the time of low wind speed (˜1.3 m/s), the current iterative technique was not able to find a solution of surface energy balance for all of the Landsat pixels, while the modified version was able to achieve it in a few iterations. The study will facilitate many operational evapotranspiration models to avoid the nonconvergence in low wind speeds, which helps to increase the accuracy of flux calculations.

  1. Fine-structure energy levels and autoionizing width calculations of magnesium-like Ni XVII

    NASA Astrophysics Data System (ADS)

    Liang, Liang; Gao, Wenjing; Zhou, Chao; Zhang, Ling

    2013-05-01

    We have calculated highly excited fine-structure energy levels and their autoionizing width of 3 pns 3 P 1 ( n = 11-26), 3 pns 1 P 1 ( n = 10-22), 3 pnd 3 D 1 ( n = 11-26), 3 pnd 3 P 1 ( n = 10-21), 3 pnd 1 P 1( n = 10-21), 3 dnp 3 D 1 ( n = 7-30), 3 dnp 3 P 1 ( n = 7-28), 3 dnp 1 P 1 ( n = 7-28), 3 dnf 3 D 1 ( n = 7, 9-27), 3 dnf 3 P 1 ( n = 7, 9-27), and 3 dnf 1 P 1 ( n = 7, 9-27) for magnesium-like Ni XVII. The calculations are based upon the relativistic Breit-Pauli R-matrix approximation combining with the QB method of Quigley-Berrington (L. Quigley, K. A. Berrington, Pelan J. Comput. Phys. Commun. 114, 225 (1998)). We have reported the many unpublished energy values and autoionizing width of the J = 1 odd states of magnesium-like Ni XVII.

  2. Free energy calculation of water addition coupled to reduction of aqueous RuO4-

    NASA Astrophysics Data System (ADS)

    Tateyama, Yoshitaka; Blumberger, Jochen; Ohno, Takahisa; Sprik, Michiel

    2007-05-01

    Free energy calculations were carried out for water addition coupled reduction of aqueous ruthenate, RuO4-+H2O +e-→[RuO3(OH)2]2-, using Car-Parrinello molecular dynamics simulations. The full reaction is divided into the reduction of the tetrahedral monoanion, RuO4-+e-→RuO42-, followed by water addition, RuO42-+H2O →[RuO3(OH)2]2-. The free energy of reduction is computed from the fluctuations of the vertical energy gap using the MnO4-+e -→MnO42- reaction as reference. The free energy for water addition is estimated using constrained molecular dynamics methods. While the description of this complex reaction, in principle, involves multiple reaction coordinates, we found that reversible transformation of the reactant into the product can be achieved by control of a single reaction coordinate consisting of a suitable linear combination of atomic distances. The free energy difference of the full reaction is computed to be -0.62eV relative to the normal hydrogen electrode. This is in good agreement with the experimental value of -0.59eV, lending further support to the hypothesis that, contrary to the ruthenate monoanion, the dianion is not tetrahedral but forms a trigonal-bipyramidal dihydroxo complex in aqueous solution. We construct an approximate two-dimensional free energy surface using the coupling parameter for reduction and the mechanical constraint for water addition as variables. Analyzing this surface we find that in the most favorable reaction pathway the reduction reaction precedes water addition. The latter takes place via the protonated complex [RuO3(OH)]- and subsequent transport of the created hydroxide ion to the fifth coordination site of Ru.

  3. Neutron spectra and dose equivalents calculated in tissue for high-energy radiation therapy

    SciTech Connect

    Kry, Stephen F.; Howell, Rebecca M.; Salehpour, Mohammad; Followill, David S.

    2009-04-15

    Neutrons are by-products of high-energy radiation therapy and a source of dose to normal tissues. Thus, the presence of neutrons increases a patient's risk of radiation-induced secondary cancer. Although neutrons have been thoroughly studied in air, little research has been focused on neutrons at depths in the patient where radiosensitive structures may exist, resulting in wide variations in neutron dose equivalents between studies. In this study, we characterized properties of neutrons produced during high-energy radiation therapy as a function of their depth in tissue and for different field sizes and different source-to-surface distances (SSD). We used a previously developed Monte Carlo model of an accelerator operated at 18 MV to calculate the neutron fluences, energy spectra, quality factors, and dose equivalents in air and in tissue at depths ranging from 0.1 to 25 cm. In conjunction with the sharply decreasing dose equivalent with increased depth in tissue, the authors found that the neutron energy spectrum changed drastically as a function of depth in tissue. The neutron fluence decreased gradually as the depth increased, while the average neutron energy decreased sharply with increasing depth until a depth of approximately 7.5 cm in tissue, after which it remained nearly constant. There was minimal variation in the quality factor as a function of depth. At a given depth in tissue, the neutron dose equivalent increased slightly with increasing field size and decreasing SSD; however, the percentage depth-dose equivalent curve remained constant outside the primary photon field. Because the neutron dose equivalent, fluence, and energy spectrum changed substantially with depth in tissue, we concluded that when the neutron dose equivalent is being determined at a depth within a patient, the spectrum and quality factor used should be appropriate for depth rather than for in-air conditions. Alternately, an appropriate percent depth-dose equivalent curve should be

  4. Ferrocenyl-substituted dinuclear Cu(II) complex: Synthesis, spectroscopy, electrochemistry, DFT calculations and catecholase activity

    NASA Astrophysics Data System (ADS)

    Emirik, Mustafa; Karaoğlu, Kaan; Serbest, Kerim; Menteşe, Emre; Yilmaz, Ismail

    2016-02-01

    A new ferrocenyl-substituted heterocyclic hydrazide ligand and its Cu(II) complex were prepared. The DFT calculations were performed to determine the electronic and molecular structures of the title compounds. The electronic spectra were calculated by using time-dependent DFT method, and the transitions were correlated with the molecular orbitals of the compounds. The bands assignments of IR spectra were achieved in the light of the theoretical vibrational spectral data and total energy distribution values calculated at DFT/B3LYP/6-311++G(d,p) level. The redox behaviors of the ferrocene derivatives were investigated by cyclic voltammetry. The compounds show reversible redox couple assignable to Fc+/Fc couple. The copper(II) complex behaves as an effective catalyst towards oxidation of 3,5-di-tert-butylcatechol to its corresponding quinone derivative in DMF saturated with O2. The reaction follows Michaelis-Menten enzymatic reaction kinetics with turnover numbers 2.32 × 103.

  5. Ferrocenyl-substituted dinuclear Cu(II) complex: Synthesis, spectroscopy, electrochemistry, DFT calculations and catecholase activity

    NASA Astrophysics Data System (ADS)

    Emirik, Mustafa; Karaoğlu, Kaan; Serbest, Kerim; Menteşe, Emre; Yilmaz, Ismail

    2016-02-01

    A new ferrocenyl-substituted heterocyclic hydrazide ligand and its Cu(II) complex were prepared. The DFT calculations were performed to determine the electronic and molecular structures of the title compounds. The electronic spectra were calculated by using time-dependent DFT method, and the transitions were correlated with the molecular orbitals of the compounds. The bands assignments of IR spectra were achieved in the light of the theoretical vibrational spectral data and total energy distribution values calculated at DFT/B3LYP/6-311++G(d,p) level. The redox behaviors of the ferrocene derivatives were investigated by cyclic voltammetry. The compounds show reversible redox couple assignable to Fc+/Fc couple. The copper(II) complex behaves as an effective catalyst towards oxidation of 3,5-di-tert-butylcatechol to its corresponding quinone derivative in DMF saturated with O2. The reaction follows Michaelis-Menten enzymatic reaction kinetics with turnover numbers 2.32 × 103.

  6. Sensitivity of low energy brachytherapy Monte Carlo dose calculations to uncertainties in human tissue composition

    SciTech Connect

    Landry, Guillaume; Reniers, Brigitte; Murrer, Lars; Lutgens, Ludy; Bloemen-Van Gurp, Esther; Pignol, Jean-Philippe; Keller, Brian; Beaulieu, Luc; Verhaegen, Frank

    2010-10-15

    Purpose: The objective of this work is to assess the sensitivity of Monte Carlo (MC) dose calculations to uncertainties in human tissue composition for a range of low photon energy brachytherapy sources: {sup 125}I, {sup 103}Pd, {sup 131}Cs, and an electronic brachytherapy source (EBS). The low energy photons emitted by these sources make the dosimetry sensitive to variations in tissue atomic number due to the dominance of the photoelectric effect. This work reports dose to a small mass of water in medium D{sub w,m} as opposed to dose to a small mass of medium in medium D{sub m,m}. Methods: Mean adipose, mammary gland, and breast tissues (as uniform mixture of the aforementioned tissues) are investigated as well as compositions corresponding to one standard deviation from the mean. Prostate mean compositions from three different literature sources are also investigated. Three sets of MC simulations are performed with the GEANT4 code: (1) Dose calculations for idealized TG-43-like spherical geometries using point sources. Radial dose profiles obtained in different media are compared to assess the influence of compositional uncertainties. (2) Dose calculations for four clinical prostate LDR brachytherapy permanent seed implants using {sup 125}I seeds (Model 2301, Best Medical, Springfield, VA). The effect of varying the prostate composition in the planning target volume (PTV) is investigated by comparing PTV D{sub 90} values. (3) Dose calculations for four clinical breast LDR brachytherapy permanent seed implants using {sup 103}Pd seeds (Model 2335, Best Medical). The effects of varying the adipose/gland ratio in the PTV and of varying the elemental composition of adipose and gland within one standard deviation of the assumed mean composition are investigated by comparing PTV D{sub 90} values. For (2) and (3), the influence of using the mass density from CT scans instead of unit mass density is also assessed. Results: Results from simulation (1) show that variations

  7. Electron ionization cross-section calculations for liquid water at high impact energies

    NASA Astrophysics Data System (ADS)

    Bousis, C.; Emfietzoglou, D.; Hadjidoukas, P.; Nikjoo, H.; Pathak, A.

    2008-04-01

    Cross-sections for the ionization of liquid water is perhaps the most essential set of data needed for modeling electron transport in biological matter. The complexity of ab initio calculations for any multi-electron target has led to largely heuristic semi-empirical models which take advantage elements of the Bethe, dielectric and binary collision theories. In this work we present various theoretical models for calculating total ionization cross-sections (TICSs) for liquid water over the 10 keV-1 MeV electron energy range. In particular, we extend our recent dielectric model calculations for liquid water to relativistic energies using both the appropriate kinematic corrections and the transverse part. Comparisons are made with widely used atomic and molecular TICS models such as those of Khare and co-workers, Kim-Rudd, Deutsch-Märk, Vriens and Gryzinski. The required dipole oscillator strength was provided by our recent optical-data model which is based on the latest experimental data for liquid water. The TICSs computed by the above models differ by up to 40% from the dielectric results. The best agreement (to within ∼10%) was obtained by Khare's original model and an approximate form of Gryzinski's model. In contrast, the binary-encounter-dipole (BED) models of both Kim-Rudd and Khare and co-workers resulted in ∼10-20% higher TICS values, while discrepancies increased to ∼30-40% when their simpler binary-encounter-Bethe (BEB) versions were used. Finally, we discuss to what extent the accuracy of the TICS is indicative of the reliability of the underlying differential cross-sections.

  8. Track structure simulations at relativistic energies: an update on cross section calculations

    NASA Astrophysics Data System (ADS)

    Dingfelder, Michael

    Charged particle track structure simulations follow the primary, as well as all (produced) sec-ondary particles in an event-by-event matter, from starting or ejection energies down to total stopping. They provide detailed information on the spacial distributions of energy depositions, interaction types, and radical species produced. These quantities provide a starting point to describe the interaction of the radiation with matter of biological interest and to explore and estimate the effects of radiation quality on various biological responses of these systems. Of special interest is liquid water which serves as surrogate for soft tissue. Ionization and excitation cross sections for bare charged particles can be calculated within the framework of the (relativistic) plane-wave Born approximation or the (relativistic) Bethe approximation. Both theories rely on a realistic model of the dielectric response function of the material under consideration and need to address relativistic medium polarization effects like the Fermi-density effect in a consistent way. In this talk we will review and present new and updated aspects of charged particle cross section calculations for relativistic heavy ions with liquid water and other materials of biological interest. This includes an updated model for the dielectric response function of liquid water to better reflect new data from inelastic X-ray scattering (IXS) experiments using synchrotron radiation and a model for the dielectric response function of calcium, which serves as a bone surrogate. We will also discuss the implementation of relativistic effect, especially of the Fermi-density effect into the cross section calculations. This work is supported by the National Aeronautics and Space Administration (NASA), grant no. NNJ04HF39G.

  9. Understanding the adsorption behavior of surface active molecules on ZnO nanostructures by experimental and first-principles calculations.

    PubMed

    Singh, Baljinder; Singh, Satvinder; Singh, Janpreet; Saini, G S S; Mehta, D S; Singh, Gurinder; Tripathi, S K; Kaura, Aman

    2015-11-11

    Zinc oxide (ZnO) nanostructures with different morphologies are prepared in the presence of surface active molecules such as sodium dodecyl sulphate (SDS), Tween 80 and Triton X-100 by a chemical method. The experimental and first principles methods are employed to understand the microscopic origin of the asymmetric growth mechanism of ZnO in the presence of various surface active molecules. Effect of increase in the amount of surface active molecules and temperature is studied on the growth morphology of ZnO. An innovative method is developed to synthesize ZnO nanowires (NWs) in the presence of SDS. Spherical nanoparticles (NPs) to spherical clusters are obtained in the presence of Triton X-100 and Tween 80. These results are then supported by first principles calculations. The adsorption of the -OH functional group on both polar and nonpolar surfaces of ZnO is modelled by using density functional theory (DFT). The calculated binding energy (BE) is almost equivalent on both the surfaces with no preference on any particular surface. The calculated value of BE shows that the -OH group is physio-adsorbed on both the surfaces. This results in the spherical morphology of nanoparticles prepared in the presence of Tween 80. Bader charge analysis shows that the charge transfer mainly takes place on top two layers of the ZnO(101[combining macron]0) surface. The absence of high values of electron localization function (ELF) reflects the lack of covalent bonding between the -OH group and the ZnO(101[combining macron]0) surface. PMID:26510134

  10. Analytic variational calculation of the ground-state binding energy of hydrogen in intermediate and intense magnetic fields

    NASA Technical Reports Server (NTRS)

    Wilson, L. W.

    1974-01-01

    The present work investigates analytically the effect of an intermediate or intense magnetic field, such as probably exist in white dwarfs and near pulsars, on the binding energy of the hydrogen ground state. A wave-function 'prescription' is given for an analytic variational calculation of the binding energy. The calculation still gives a smooth transition between intermediate and intense fields. An explicit calculation of the ground-state binding energy as B goes to infinity is provided for the Yafet et al. (1956) trial function.

  11. Solar Energy Project, Activities: Junior High Science.

    ERIC Educational Resources Information Center

    Tullock, Bruce, Ed.; And Others

    This guide contains lesson plans and outlines of science activities which present concepts of solar energy in the context of the junior high science curriculum. Each unit presents an introduction; objectives; skills and knowledge needed; materials; methods; questions; recommendations for further work; and a teacher information sheet. The teacher…

  12. Solar Energy Project, Activities: Earth Science.

    ERIC Educational Resources Information Center

    Tullock, Bruce, Ed.; And Others

    This guide contains lesson plans and outlines of science activities which present concepts of solar energy in the context of earth science experiments. Each unit presents an introduction; objectives; skills and knowledge needed; materials; method; questions; recommendations for further study; and a teacher information sheet. The teacher…

  13. Energy Activities for Junior High Social Studies.

    ERIC Educational Resources Information Center

    Minnesota State Energy Agency, St. Paul.

    The document contains seven learning activities for junior high students on the energy situation. Objectives are to help students gain understanding and knowledge about the relationships between humans and their social and physical environments; solve problems and clarify issues; examine personal beliefs and values; and recognize the relationships…

  14. Solar Energy Project, Activities: Chemistry & Physics.

    ERIC Educational Resources Information Center

    Tullock, Bruce, Ed.; And Others

    This guide contains lesson plans and outlines of science activities which present concepts of solar energy in the context of chemistry and physics experiments. Each unit presents an introduction to the unit; objectives; required skills and knowledge; materials; method; questions; recommendations for further work; and a teacher information sheet.…

  15. Calculation of rotation-vibration energy levels of the ammonia molecule based on an ab initio potential energy surface

    NASA Astrophysics Data System (ADS)

    Polyansky, Oleg L.; Ovsyannikov, Roman I.; Kyuberis, Aleksandra A.; Lodi, Lorenzo; Tennyson, Jonathan; Yachmenev, Andrey; Yurchenko, Sergei N.; Zobov, Nikolai F.

    2016-09-01

    An ab initio potential energy surface (PES) for gas-phase ammonia NH3 has been computed using the methodology pioneered for water (Polyansky et al., 2013). Multireference configuration interaction calculations are performed at about 50 000 points using the aug-cc-pCVQZ and aug-cc-pCV5Z basis sets and basis set extrapolation. Relativistic and adiabatic surfaces are also computed. The points are fitted to a suitable analytical form, producing the most accurate ab initio PES for this molecule available. The rotation-vibration energy levels are computed using nuclear motion program TROVE in both linearised and curvilinear coordinates. Better convergence is obtained using curvilinear coordinates. Our results are used to assign the visible spectrum of 14NH3 recorded by Coy and Lehmann (1986). Rotation-vibration energy levels for the isotopologues NH2D, NHD2, ND3 and 15NH3 are also given. An ab initio value for the dissociation energy D0 of 14NH3 is also presented.

  16. The Magnetic Free Energy in Active Regions

    NASA Technical Reports Server (NTRS)

    Metcalf, Thomas R.; Mickey, Donald L.; LaBonte, Barry J.

    2001-01-01

    The magnetic field permeating the solar atmosphere governs much of the structure, morphology, brightness, and dynamics observed on the Sun. The magnetic field, especially in active regions, is thought to provide the power for energetic events in the solar corona, such as solar flares and Coronal Mass Ejections (CME) and is believed to energize the hot coronal plasma seen in extreme ultraviolet or X-rays. The question remains what specific aspect of the magnetic flux governs the observed variability. To directly understand the role of the magnetic field in energizing the solar corona, it is necessary to measure the free magnetic energy available in active regions. The grant now expiring has demonstrated a new and valuable technique for observing the magnetic free energy in active regions as a function of time.

  17. Validation of local hybrid functionals for TDDFT calculations of electronic excitation energies

    NASA Astrophysics Data System (ADS)

    Maier, Toni M.; Bahmann, Hilke; Arbuznikov, Alexei V.; Kaupp, Martin

    2016-02-01

    The first systematic evaluation of local hybrid functionals for the calculation of electronic excitation energies within linear-response time-dependent density functional theory (TDDFT) is reported. Using our recent efficient semi-numerical TDDFT implementation [T. M. Maier et al., J. Chem. Theory Comput. 11, 4226 (2015)], four simple, thermochemically optimized one-parameter local hybrid functionals based on local spin-density exchange are evaluated against a database of singlet and triplet valence excitations of organic molecules, and against a mixed database including also Rydberg, intramolecular charge-transfer (CT) and core excitations. The four local hybrids exhibit comparable performance to standard global or range-separated hybrid functionals for common singlet valence excitations, but several local hybrids outperform all other functionals tested for the triplet excitations of the first test set, as well as for relative energies of excited states. Evaluation for the combined second test set shows that local hybrids can also provide excellent Rydberg and core excitations, in the latter case rivaling specialized functionals optimized specifically for such excitations. This good performance of local hybrids for different excitation types could be traced to relatively large exact-exchange (EXX) admixtures in a spatial region intermediate between valence and asymptotics, as well as close to the nucleus, and lower EXX admixtures in the valence region. In contrast, the tested local hybrids cannot compete with the best range-separated hybrids for intra- and intermolecular CT excitation energies. Possible directions for improvement in the latter category are discussed. As the used efficient TDDFT implementation requires essentially the same computational effort for global and local hybrids, applications of local hybrid functionals to excited-state problems appear promising in a wide range of fields. Influences of current-density dependence of local kinetic-energy

  18. Free energy calculation provides insight into the action mechanism of selective PARP-1 inhibitor.

    PubMed

    Cao, Ran

    2016-04-01

    Selective poly (ADP-ribose) polymerase (PARP)-1 inhibitor represents promising therapy against cancers with a good balance between efficacy and safety. Owing to the conserved structure between PARP-1 and PARP-2, most of the clinical and experimental drugs show equivalent inhibition against both targets. Most recently, it's disclosed a highly selective PARP-1 inhibitor (NMS-P118) with promising pharmacokinetic properties. Herein, we combined molecular simulation with free energy calculation to gain insights into the selective mechanism of NMS-P118. Our results suggest the reduction of binding affinity for PARP-2 is attributed to the unfavorable conformational change of protein, which is accompanied by a significant energy penalty. Alanine-scanning mutagenesis study further reveals the important role for a tyrosine residue of donor loop (Tyr889(PARP-1) and Tyr455(PARP-2)) in contributing to the ligand selectivity. Retrospective structural analysis indicates the ligand-induced movement of Tyr455(PARP-2) disrupts the intra-molecule hydrogen bonding network, which partially accounts for the "high-energy" protein conformation in the presence of NMS-P118. Interestingly, such effect isn't observed in other non-selective PARP inhibitors including BMN673 and A861695, which validates the computational prediction. Our work provides energetic insight into the subtle variations in the crystal structures and could facilitate rational design of new selective PARP inhibitor.

  19. Momentum or kinetic energy - How do substrate properties influence the calculation of rainfall erosivity?

    NASA Astrophysics Data System (ADS)

    Goebes, Philipp; Seitz, Steffen; Geißler, Christian; Lassu, Tamás; Peters, Piet; Seeger, Manuel; Nadrowski, Karin; Scholten, Thomas

    2014-09-01

    Rainfall erosivity is a key component in soil erosion by water. While kinetic energy and momentum are used to describe the erosivity of rainfall, and both are derived from mass and velocity of raindrops, it is not clear how different substrates transform this energy. In our study we conducted rainfall simulation experiments to determine splash detachment amounts of five substrates (coarse sand, medium sand, fine sand, PE balls, silt) for seven different rainfall intensities (52-116 mm h-1). We used linear mixed-effect modeling (LME) to calculate erosivity predictors for each substrate. Additionally, we separated drop-size-velocity relationship into lower left and upper right quarter to investigate the effect of small and slow just as big and fast raindrops on splash detachment amounts. We suggest using momentum divided by drop diameter as a substrate-independent erosivity predictor. To consider different substrates specific erosivity parameters are needed. Heavier substrates like sand are best described by kinetic energy multiplied by diameter whereas lighter substrates like silt point to momentum divided by diameter to the power of 1.5. Furthermore, our results show that substrates are differently affected by the size and velocity of drops. While splash detachment of light substances can be reliably predicted by drop size and velocity for small and slow drops, drop size and velocity loses its predictive power in heavier substrates like sand.

  20. Ensemble variance in free energy calculations by thermodynamic integration: theory, optimal "Alchemical" path, and practical solutions.

    PubMed

    Blondel, Arnaud

    2004-05-01

    Thermodynamic integration is a widely used method to calculate and analyze the effect of a chemical modification on the free energy of a chemical or biochemical process, for example, the impact of an amino acid substitution on protein association. Numerical fluctuations can introduce large uncertainties, limiting the domain of application of the method. The parametric energy function describing the chemical modification in the thermodynamic integration, the "Alchemical path," determines the amplitudes of the fluctuations. In the present work, I propose a measure of the fluctuations in the thermodynamic integration and an approach to search for a parametric energy path minimizing that measure. The optimal path derived with this approach is very close to the theoretical minimum of the measure, but produces nonergodic sampling. Nevertheless, this path is used to guide the design of a practical and efficient path producing correct sampling. The convergence with this practical path is evaluated on test cases, and compares favorably with that of other methods such as power or polynomial path, soft-core van der Waals, and some other approaches presented in the literature.

  1. Energy of the interaction between membrane lipid domains calculated from splay and tilt deformations

    NASA Astrophysics Data System (ADS)

    Galimzyanov, T. R.; Molotkovsky, R. J.; Kheyfets, B. B.; Akimov, S. A.

    2013-01-01

    Specific domains, called rafts, are formed in cell membranes. Similar lipid domains can be formed in model membranes as a result of phase separation with raft size may remaining small (˜10-100 nm) for a long time. The characteristic lifetime of a nanoraft ensemble strongly depends on the nature of mutual raft interactions. The interaction energy between the boundaries of two rafts has been calculated under the assumption that the thickness of the raft bilayer is greater than that of the surrounding membrane, and elastic deformations appear in order to smooth the thickness mismatch at the boundary. When rafts approach each other, deformations from their boundaries overlap, making interaction energy profile sophisticated. It has been shown that raft merger occurs in two stages: rafts first merge in one monolayer of the lipid bilayer and then in another monolayer. Each merger stage requires overcoming of an energy barrier of about 0.08-0.12 k BT per 1 nm of boundary length. These results allow us to explain the stability of the ensemble of finite sized rafts.

  2. PLUMED: A portable plugin for free-energy calculations with molecular dynamics

    NASA Astrophysics Data System (ADS)

    Bonomi, Massimiliano; Branduardi, Davide; Bussi, Giovanni; Camilloni, Carlo; Provasi, Davide; Raiteri, Paolo; Donadio, Davide; Marinelli, Fabrizio; Pietrucci, Fabio; Broglia, Ricardo A.; Parrinello, Michele

    2009-10-01

    Here we present a program aimed at free-energy calculations in molecular systems. It consists of a series of routines that can be interfaced with the most popular classical molecular dynamics (MD) codes through a simple patching procedure. This leaves the possibility for the user to exploit many different MD engines depending on the system simulated and on the computational resources available. Free-energy calculations can be performed as a function of many collective variables, with a particular focus on biological problems, and using state-of-the-art methods such as metadynamics, umbrella sampling and Jarzynski-equation based steered MD. The present software, written in ANSI-C language, can be easily interfaced with both Fortran and C/C++ codes. Program summaryProgram title: PLUMED Catalogue identifier: AEEE_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEEE_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Lesser GPL No. of lines in distributed program, including test data, etc.: 107 505 No. of bytes in distributed program, including test data, etc.: 2 052 759 Distribution format: tar.gz Programming language: ANSI-C Computer: Any computer capable of running an executable produced by GCC compiler Operating system: Linux/Unix RAM: Depending on the number of atoms, the method chosen and the collective variables used Classification: 23 External routines: Must be interfaced with a MD code (such as GROMACS, NAMD, DL_POLY or SANDER). Nature of problem: Calculation of free-energy surfaces for biological and condensed matter systems. Solution method: Implementation of various enhanced sampling techniques. Unusual features: PLUMED is not a stand-alone program but it must be interfaced with a MD code (such as GROMACS, NAMD, DL_POLY or SANDER) that needs to be recompiled. Each interface is provided in a patch form. Running time: Depending on the number of atoms, the method chosen and the

  3. X-ray Single Crystal Structure, DFT Calculations and Biological Activity of 2-(3-Methyl-5-(pyridin-2'-yl)-1H-pyrazol-1-yl) Ethanol.

    PubMed

    Radi, Smaail; Attayibat, Ahmed; El-Massaoudi, Mohamed; Salhi, Amin; Eddike, Driss; Tillard, Monique; Mabkhot, Yahia N

    2016-01-01

    A pyridylpyrazole bearing a hydroxyethyl substituent group has been synthesized by condensation of (Z)-4-hydroxy-4-(pyridin-2-yl)but-3-en-2-one with 2-hydroxyethylhydrazine. The compound was well characterized and its structure confirmed by single crystal X-ray diffraction. Density functional calculations have been performed using DFT method with 6-31G* basis set. The HOMO-LUMO energy gap, binding energies and electron deformation densities are calculated at the DFT (BLYP, PW91, PWC) level. The electrophilic f(-) and nucleophilic f(+) Fukui functions and also the electrophilic and nucleophilic Parr functions are well adapted to find the electrophile and nucleophile centers in the molecule. The title compound has been tested for its DPPH radical scavenging activity which is involved in aging processes, anti-inflammatory, anticancer and wound healing activity. Compound is also found with a significant antioxidant activity, probably due to the ability to donate a hydrogen atom to the DPPH radical. PMID:27527141

  4. X-ray Single Crystal Structure, DFT Calculations and Biological Activity of 2-(3-Methyl-5-(pyridin-2'-yl)-1H-pyrazol-1-yl) Ethanol.

    PubMed

    Radi, Smaail; Attayibat, Ahmed; El-Massaoudi, Mohamed; Salhi, Amin; Eddike, Driss; Tillard, Monique; Mabkhot, Yahia N

    2016-08-05

    A pyridylpyrazole bearing a hydroxyethyl substituent group has been synthesized by condensation of (Z)-4-hydroxy-4-(pyridin-2-yl)but-3-en-2-one with 2-hydroxyethylhydrazine. The compound was well characterized and its structure confirmed by single crystal X-ray diffraction. Density functional calculations have been performed using DFT method with 6-31G* basis set. The HOMO-LUMO energy gap, binding energies and electron deformation densities are calculated at the DFT (BLYP, PW91, PWC) level. The electrophilic f(-) and nucleophilic f(+) Fukui functions and also the electrophilic and nucleophilic Parr functions are well adapted to find the electrophile and nucleophile centers in the molecule. The title compound has been tested for its DPPH radical scavenging activity which is involved in aging processes, anti-inflammatory, anticancer and wound healing activity. Compound is also found with a significant antioxidant activity, probably due to the ability to donate a hydrogen atom to the DPPH radical.

  5. Energy Expenditure During Extravehicular Activity Through Apollo

    NASA Technical Reports Server (NTRS)

    Paul, Heather L.

    2012-01-01

    Monitoring crew health during manned space missions has always been an important factor to ensure that the astronauts can complete the missions successfully and within safe physiological limits. The necessity of real-time metabolic rate monitoring during extravehicular activities (EVAs) came into question during the Gemini missions, when the energy expenditure required to complete EVA tasks exceeded the life support capabilities for cooling and humidity control and, as a result, crew members ended the EVAs fatigued and overworked. This paper discusses the importance of real-time monitoring of metabolic rate during EVAs, and provides a historical look at energy expenditure during EVAs through the Apollo Program.

  6. Energy Expenditure During Extravehicular Activity Through Apollo

    NASA Technical Reports Server (NTRS)

    Paul, Heather L.

    2011-01-01

    Monitoring crew health during manned space missions has always been an important factor to ensure that the astronauts can complete the missions successfully and within safe physiological limits. The necessity of real-time metabolic rate monitoring during extravehicular activities (EVAs) came into question during the Gemini missions, when the energy expenditure required to complete EVA tasks exceeded the life support capabilities for cooling and humidity control and crewmembers (CMs) ended the EVAs fatigued and overworked. This paper discusses the importance of real-time monitoring of metabolic rate during EVA, and provides a historical look at energy expenditure during EVA through the Apollo program.

  7. Calculation of a mirror asymmetric effect in electron scattering from chiral targets. [in optically active medium

    NASA Technical Reports Server (NTRS)

    Rich, A.; Van House, J.; Hegstrom, R. A.

    1982-01-01

    A dynamical calculation is presented of the helicity induced in an initially unpolarized electron beam after elastic scattering from an optically active medium, a process analogous to the circular polarization induced in unpolarized light following Rayleigh scattering from chiral targets. The calculation is based on the bound helical electron model of a chiral molecule, according to which the major contribution to the helicity is provided by the perturbation of the electron bound state by the spin-orbit interaction of the bound electrons moving in the electric field of the molecular core. The net helicity acquired is found to depend directly on a molecular asymmetry factor and the square of the atomic number of the heaviest atom in an asymmetric environment. For the case of carbon, the induced helicity is on the order of 0.00001, which would account for its lack of observation in a recent experiment. Results may have implications for the origin of optical activity in biological molecules by the differential ionization of D and L isomers by beta-decay electrons.

  8. Dynamics study of the OH + NH3 hydrogen abstraction reaction using QCT calculations based on an analytical potential energy surface

    NASA Astrophysics Data System (ADS)

    Monge-Palacios, M.; Corchado, J. C.; Espinosa-Garcia, J.

    2013-06-01

    To understand the reactivity and mechanism of the OH + NH3 → H2O + NH2 gas-phase reaction, which evolves through wells in the entrance and exit channels, a detailed dynamics study was carried out using quasi-classical trajectory calculations. The calculations were performed on an analytical potential energy surface (PES) recently developed by our group, PES-2012 [Monge-Palacios et al. J. Chem. Phys. 138, 084305 (2013)], 10.1063/1.4792719. Most of the available energy appeared as H2O product vibrational energy (54%), reproducing the only experimental evidence, while only the 21% of this energy appeared as NH2 co-product vibrational energy. Both products appeared with cold and broad rotational distributions. The excitation function (constant collision energy in the range 1.0-14.0 kcal mol-1) increases smoothly with energy, contrasting with the only theoretical information (reduced-dimensional quantum scattering calculations based on a simplified PES), which presented a peak at low collision energies, related to quantized states. Analysis of the individual reactive trajectories showed that different mechanisms operate depending on the collision energy. Thus, while at high energies (Ecoll ≥ 6 kcal mol-1) all trajectories are direct, at low energies about 20%-30% of trajectories are indirect, i.e., with the mediation of a trapping complex, mainly in the product well. Finally, the effect of the zero-point energy constraint on the dynamics properties was analyzed.

  9. Dynamics study of the OH + NH3 hydrogen abstraction reaction using QCT calculations based on an analytical potential energy surface.

    PubMed

    Monge-Palacios, M; Corchado, J C; Espinosa-Garcia, J

    2013-06-01

    To understand the reactivity and mechanism of the OH + NH3 → H2O + NH2 gas-phase reaction, which evolves through wells in the entrance and exit channels, a detailed dynamics study was carried out using quasi-classical trajectory calculations. The calculations were performed on an analytical potential energy surface (PES) recently developed by our group, PES-2012 [Monge-Palacios et al. J. Chem. Phys. 138, 084305 (2013)]. Most of the available energy appeared as H2O product vibrational energy (54%), reproducing the only experimental evidence, while only the 21% of this energy appeared as NH2 co-product vibrational energy. Both products appeared with cold and broad rotational distributions. The excitation function (constant collision energy in the range 1.0-14.0 kcal mol(-1)) increases smoothly with energy, contrasting with the only theoretical information (reduced-dimensional quantum scattering calculations based on a simplified PES), which presented a peak at low collision energies, related to quantized states. Analysis of the individual reactive trajectories showed that different mechanisms operate depending on the collision energy. Thus, while at high energies (E(coll) ≥ 6 kcal mol(-1)) all trajectories are direct, at low energies about 20%-30% of trajectories are indirect, i.e., with the mediation of a trapping complex, mainly in the product well. Finally, the effect of the zero-point energy constraint on the dynamics properties was analyzed.

  10. 3D calculation of Tucson-Melbourne 3NF effect in triton binding energy

    SciTech Connect

    Hadizadeh, M. R.; Tomio, L.; Bayegan, S.

    2010-08-04

    As an application of the new realistic three-dimensional (3D) formalism reported recently for three-nucleon (3N) bound states, an attempt is made to study the effect of three-nucleon forces (3NFs) in triton binding energy in a non partial wave (PW) approach. The spin-isospin dependent 3N Faddeev integral equations with the inclusion of 3NFs, which are formulated as function of vector Jacobi momenta, specifically the magnitudes of the momenta and the angle between them, are solved with Bonn-B and Tucson-Melbourne NN and 3N forces in operator forms which can be incorporated in our 3D formalism. The comparison with numerical results in both, novel 3D and standard PW schemes, shows that non PW calculations avoid the very involved angular momentum algebra occurring for the permutations and transformations and it is more efficient and less cumbersome for considering the 3NF.

  11. Temperature dependent effective potential method for accurate free energy calculations of solids

    NASA Astrophysics Data System (ADS)

    Hellman, Olle; Steneteg, Peter; Abrikosov, I. A.; Simak, S. I.

    2013-03-01

    We have developed a thorough and accurate method of determining anharmonic free energies, the temperature dependent effective potential technique (TDEP). It is based on ab initio molecular dynamics followed by a mapping onto a model Hamiltonian that describes the lattice dynamics. The formalism and the numerical aspects of the technique are described in detail. A number of practical examples are given, and results are presented, which confirm the usefulness of TDEP within ab initio and classical molecular dynamics frameworks. In particular, we examine from first principles the behavior of force constants upon the dynamical stabilization of the body centered phase of Zr, and show that they become more localized. We also calculate the phase diagram for 4He modeled with the Aziz potential and obtain results which are in favorable agreement both with respect to experiment and established techniques.

  12. Direct calculation of average and marginal costs from the productive structure of an energy system

    SciTech Connect

    Lazzaretto, A.; Macor, A.

    1995-09-01

    Most of the thermoeconomic accounting and optimization methods for energy systems are based upon a definition of the productive purpose for each component. On the basis of this definition, a productive structure of the system can be defined in which the interactions among the components are described by their fuel product. The aim of this work is to calculate marginal and average unit costs of the exergy flows starting from their definitions by a direct inspection of the productive structure. As a main result, it is noticed that the only differences between marginal and average unit cost equations are located in the capital cost terms of input-output cost balance equations of the components. The method is illustrated using a cogenerative stream power plant and a combined gas-steam power plant.

  13. Distributed Multipolar Expansion Approach to Calculation of Excitation Energy Transfer Couplings.

    PubMed

    Błasiak, Bartosz; Maj, Michał; Cho, Minhaeng; Góra, Robert W

    2015-07-14

    We propose a new approach for estimating the electrostatic part of the excitation energy transfer (EET) coupling between electronically excited chromophores based on the transition density-derived cumulative atomic multipole moments (TrCAMM). In this approach, the transition potential of a chromophore is expressed in terms of truncated distributed multipolar expansion and analytical formulas for the TrCAMMs are derived. The accuracy and computational feasibility of the proposed approach is tested against the exact Coulombic couplings, and various multipole expansion truncation schemes are analyzed. The results of preliminary calculations show that the TrCAMM approach is capable of reproducing the exact Coulombic EET couplings accurately and efficiently and is superior to other widely used schemes: the transition charges from electrostatic potential (TrESP) and the transition density cube (TDC) method.

  14. Thermodynamic Derivation of the Activation Energy for Ice Nucleation

    NASA Technical Reports Server (NTRS)

    Barahona, D.

    2015-01-01

    Cirrus clouds play a key role in the radiative and hydrological balance of the upper troposphere. Their correct representation in atmospheric models requires an understanding of the microscopic processes leading to ice nucleation. A key parameter in the theoretical description of ice nucleation is the activation energy, which controls the flux of water molecules from the bulk of the liquid to the solid during the early stages of ice formation. In most studies it is estimated by direct association with the bulk properties of water, typically viscosity and self-diffusivity. As the environment in the ice-liquid interface may differ from that of the bulk, this approach may introduce bias in calculated nucleation rates. In this work a theoretical model is proposed to describe the transfer of water molecules across the ice-liquid interface. Within this framework the activation energy naturally emerges from the combination of the energy required to break hydrogen bonds in the liquid, i.e., the bulk diffusion process, and the work dissipated from the molecular rearrangement of water molecules within the ice-liquid interface. The new expression is introduced into a generalized form of classical nucleation theory. Even though no nucleation rate measurements are used to fit any of the parameters of the theory the predicted nucleation rate is in good agreement with experimental results, even at temperature as low as 190 K, where it tends to be underestimated by most models. It is shown that the activation energy has a strong dependency on temperature and a weak dependency on water activity. Such dependencies are masked by thermodynamic effects at temperatures typical of homogeneous freezing of cloud droplets; however, they may affect the formation of ice in haze aerosol particles. The new model provides an independent estimation of the activation energy and the homogeneous ice nucleation rate, and it may help to improve the interpretation of experimental results and the

  15. Thermodynamic derivation of the activation energy for ice nucleation

    NASA Astrophysics Data System (ADS)

    Barahona, D.

    2015-12-01

    Cirrus clouds play a key role in the radiative and hydrological balance of the upper troposphere. Their correct representation in atmospheric models requires an understanding of the microscopic processes leading to ice nucleation. A key parameter in the theoretical description of ice nucleation is the activation energy, which controls the flux of water molecules from the bulk of the liquid to the solid during the early stages of ice formation. In most studies it is estimated by direct association with the bulk properties of water, typically viscosity and self-diffusivity. As the environment in the ice-liquid interface may differ from that of the bulk, this approach may introduce bias in calculated nucleation rates. In this work a theoretical model is proposed to describe the transfer of water molecules across the ice-liquid interface. Within this framework the activation energy naturally emerges from the combination of the energy required to break hydrogen bonds in the liquid, i.e., the bulk diffusion process, and the work dissipated from the molecular rearrangement of water molecules within the ice-liquid interface. The new expression is introduced into a generalized form of classical nucleation theory. Even though no nucleation rate measurements are used to fit any of the parameters of the theory the predicted nucleation rate is in good agreement with experimental results, even at temperature as low as 190 K, where it tends to be underestimated by most models. It is shown that the activation energy has a strong dependency on temperature and a weak dependency on water activity. Such dependencies are masked by thermodynamic effects at temperatures typical of homogeneous freezing of cloud droplets; however, they may affect the formation of ice in haze aerosol particles. The new model provides an independent estimation of the activation energy and the homogeneous ice nucleation rate, and it may help to improve the interpretation of experimental results and the

  16. Efficient Calculation of Free Energy Differences Associated with Isotopic Substitution Using Path-Integral Molecular Dynamics.

    PubMed

    Marsalek, Ondrej; Chen, Pei-Yang; Dupuis, Romain; Benoit, Magali; Méheut, Merlin; Bačić, Zlatko; Tuckerman, Mark E

    2014-04-01

    The problem of computing free energy differences due to isotopic substitution in chemical systems is discussed. The shift in the equilibrium properties of a system upon isotopic substitution is a purely quantum mechanical effect that can be quantified using the Feynman path integral approach. In this paper, we explore two developments that lead to a highly efficient path integral scheme. First, we employ a mass switching function inspired by the work of Ceriotti and Markland [ J. Chem. Phys. 2013, 138, 014112] that is based on the inverse square root of the mass and which leads to a perfectly constant free energy derivative with respect to the switching parameter in the harmonic limit. We show that even for anharmonic systems, this scheme allows a single-point thermodynamic integration approach to be used in the construction of free energy differences. In order to improve the efficiency of the calculations even further, however, we derive a set of free energy derivative estimators based on the fourth-order scheme of Takahashi and Imada [ J. Phys. Soc. Jpn. 1984, 53, 3765]. The Takahashi-Imada procedure generates a primitive fourth-order estimator that allows the number of imaginary time slices in the path-integral approach to be reduced substantially. However, as with all primitive estimators, its convergence is plagued by numerical noise. In order to alleviate this problem, we derive a fourth-order virial estimator based on a transferring of the difference between second- and fourth-order primitive estimators, which remains relatively constant as a function of the number of configuration samples, to the second-order virial estimator. We show that this new estimator converges as smoothly as the second-order virial estimator but requires significantly fewer imaginary time points. PMID:26580362

  17. Site-Specific Fragment Identification Guided by Single-Step Free Energy Perturbation Calculations

    PubMed Central

    Raman, E. Prabhu; Vanommeslaeghe, Kenno; MacKerell, Alexander D.

    2012-01-01

    The in-silico Site Identification by Ligand Competitive Saturation (SILCS) approach identifies the binding sites of representative chemical entities on the entire protein surface, information that can be applied for computational fragment-based drug design. In this study, we report an efficient computational protocol that uses sampling of the protein-fragment conformational space obtained from the SILCS simulations and performs single step free energy perturbation (SSFEP) calculations to identify site-specific favorable chemical modifications of benzene involving substitutions of ring hydrogens with individual non-hydrogen atoms. The SSFEP method is able to capture the experimental trends in relative hydration free energies of benzene analogues and for two datasets of experimental relative binding free energies of congeneric series of ligands of the proteins α-thrombin and P38 MAP kinase. The approach includes a protocol in which data obtained from SILCS simulations of the proteins is first analyzed to identify favorable benzene binding sites following which an ensemble of benzene-protein conformations for that site is obtained. The SSFEP protocol applied to that ensemble results in good reproduction of experimental free energies of the α-thrombin ligands, but not for P38 MAP kinase ligands. Comparison with results from a P38 full-ligand simulation and analysis of conformations reveals the reason for the poor agreement being the connectivity with the remainder of the ligand, a limitation inherent in fragment-based methods. Since the SSFEP approach can identify favorable benzene modifications as well as identify the most favorable fragment conformations, the obtained information can be of value for fragment linking or structure-based optimization. PMID:23144598

  18. Effective approach for accurately calculating individual energy of polar heterojunction interfaces

    NASA Astrophysics Data System (ADS)

    Akiyama, Toru; Nakane, Harunobu; Nakamura, Kohji; Ito, Tomonori

    2016-09-01

    We propose a direct approach for calculating individual energy of polar semiconductor interfaces using density functional theory calculations. This approach is applied to polar interfaces between group-III nitrides (AlN and GaN) and SiC and clarifies the interplay of chemical bonding and charge neutrality at the interface, which is crucial for the stability and polarity of group-III nitrides on SiC substrates. The ideal interface is stabilized among various atomic arrangements over the wide range of the chemical potential on Si-face SiC, whereas those with intermixing are favorable on C-face SiC. The stabilization of the ideal interfaces resulting in Ga-polar GaN and Al-polar AlN films on Si-face SiC is consistent with experiments, suggesting that our approach is versatile to evaluate various polar heterojunction interfaces as well as group-III nitrides on semiconductor substrates.

  19. Checking the Beam Energy Calculation from the June 14, 2000 $\\psi^\\prime$ Scan

    SciTech Connect

    Werkema, Steve; /Fermilab

    2000-06-14

    The Conclusions/Recommendations of this paper are: (1) It is very important to keep the orbit close to the reference orbit. (2) It is likely that BPMs are not perfectly calibrated. (3) The orbit length calculation with Quad Steering ON is more sensitive to errors in the BPM readout than with Quad Steering OFF. However, unless we are at the {psi}{prime}, Quad Steering should be ON. (4) Question: Should we use the BPM corrections derived from this scan? Answer: I don't know. I would prefer not to. If we keep the orbit close to the reference, we don't need the corrections. For cases where the orbit differs appreciably from the reference orbit, we should do the energy calculation both ways. (Perhaps with Quad steering ON and OFF too). (5) We should use the reference orbit derived from this scan. However, if there is the time and the man power, it would be desireable to do a proper scan of the {psi}{prime}.

  20. Bond dissociation energy of the phenol O sbnd H bond from ab initio calculations

    NASA Astrophysics Data System (ADS)

    da Silva, Gabriel; Chen, Chiung-Chu; Bozzelli, Joseph W.

    2006-06-01

    The phenol O sbnd H bond dissociation energy (BDE) is currently disputed, despite its importance in combustion chemistry and in the reactions of antioxidants such as vitamin E. We have studied this BDE using the computational methods G3, G3B3 and CBS-APNO, with bond-isodesmic work reactions. These calculations yield a BDE of 89.0 ± 1.0 kcal mol -1, which supports other recent calculations [B.J. Costa Cabral, S. Canuto, Chem. Phys. Lett. 406 (2005) 300]. From our BDE we determine the enthalpy of formation of the phenoxy radical to be 13.9 ± 1.0 kcal mol -1. Comparison of the phenol C sbnd H BDE with the vinyl alcohol H sbnd CH dbnd CHOH BDE reveals the bond in phenol to be around 3 kcal mol -1 stronger than that in vinyl alcohol. Replacement of a H atom with the OH group on benzene or ethylene strengthens the C sbnd H bonds on adjacent carbons by 3 to 4 kcal mol -1.

  1. Surface energy budget and thermal inertia at Gale Crater: Calculations from ground-based measurements

    PubMed Central

    Martínez, G M; Rennó, N; Fischer, E; Borlina, C S; Hallet, B; de la Torre Juárez, M; Vasavada, A R; Ramos, M; Hamilton, V; Gomez-Elvira, J; Haberle, R M

    2014-01-01

    The analysis of the surface energy budget (SEB) yields insights into soil-atmosphere interactions and local climates, while the analysis of the thermal inertia (I) of shallow subsurfaces provides context for evaluating geological features. Mars orbital data have been used to determine thermal inertias at horizontal scales of ∼104 m2 to ∼107 m2. Here we use measurements of ground temperature and atmospheric variables by Curiosity to calculate thermal inertias at Gale Crater at horizontal scales of ∼102 m2. We analyze three sols representing distinct environmental conditions and soil properties, sol 82 at Rocknest (RCK), sol 112 at Point Lake (PL), and sol 139 at Yellowknife Bay (YKB). Our results indicate that the largest thermal inertia I = 452 J m−2 K−1 s−1/2 (SI units used throughout this article) is found at YKB followed by PL with I = 306 and RCK with I = 295. These values are consistent with the expected thermal inertias for the types of terrain imaged by Mastcam and with previous satellite estimations at Gale Crater. We also calculate the SEB using data from measurements by Curiosity's Rover Environmental Monitoring Station and dust opacity values derived from measurements by Mastcam. The knowledge of the SEB and thermal inertia has the potential to enhance our understanding of the climate, the geology, and the habitability of Mars. PMID:26213666

  2. Energy expenditure by doubly labeled water: validation in humans and proposed calculation

    SciTech Connect

    Schoeller, D.A.; Ravussin, E.; Schutz, Y.; Acheson, K.J.; Baertschi, P.; Jequier, E.

    1986-05-01

    To further validate the doubly labeled water method for measurement of CO/sub 2/ production and energy expenditure in humans, we compared it with near-continuous respiratory gas exchange in nine healthy young adult males. Subjects were housed in a respiratory chamber for 4 days. Each received /sup 2/H/sub 2/(18)O at either a low (n = 6) or a moderate (n = 3) isotope dose. Low and moderate doses produced initial /sup 2/H enrichments of 5 and 10 X 10(-3) atom percent excess, respectively, and initial 18O enrichments of 2 and 2.5 X 10(-2) atom percent excess, respectively. Total body water was calculated from isotope dilution in saliva collected at 4 and 5 h after the dose. CO/sub 2/ production was calculated by the two-point method using the isotopic enrichments of urines collected just before each subject entered and left the chamber. Isotope enrichments relative to predose samples were measured by isotope ratio mass spectrometry. At low isotope dose, doubly labeled water overestimated average daily energy expenditure by 8 +/- 9% (SD) (range -7 to 22%). At moderate dose the difference was reduced to +4 +/- 5% (range 0-9%). The isotope elimination curves for /sup 2/H and 18O from serial urines collected from one of the subjects showed expected diurnal variations but were otherwise quite smooth. The overestimate may be due to approximations in the corrections for isotope fractionation and isotope dilution. An alternative approach to the corrections is presented that reduces the overestimate to 1%.

  3. Simple thermodynamic model of unassisted proton shuttle uncoupling and prediction of activity from calculated speciation, lipophilicity, and molecular geometry.

    PubMed

    Martineau, Louis C

    2012-06-21

    A mechanistic model of uncoupling of oxidative phosphorylation by lipophilic weak acids (i.e. proton shuttles) was developed for the purposes of predicting the relative activity of xenobiotics of widely varying structure and of guiding the design of optimized derivatives. The model is based on thermodynamic premises not formulated elsewhere that allow for the calculation of steady-state conditions and of rate of energy dissipation on the basis of acid-dissociation and permeability behavior, the later estimated from partitioning behavior and geometric considerations. Moreover, permeability of either the neutral or of the ionized species is proposed to be effectively enhanced under conditions of asymmetrical molecular distribution. Finally, special considerations were developed to accommodate multi-protic compounds. The comparison of predicted to measured activity for a diverse testset of 48 compounds of natural origin spanning a wide range of activity yielded a Spearman's rho of 0.90. The model was used to tentatively identify several novel proton shuttles, as well as to elucidate core structures particularly conducive to proton shuttle activity from which optimized derivatives can be designed. Principles of design were formulated and examples of derivatives projected to be active at concentrations on the order of 10(-7)M are proposed. Among these are di-protic compounds predicted to shuttle two protons per cycle iteration and proposed to maximally exploit the proton shuttle mechanism. This work promotes the design of highly active, yet easily-metabolized uncouplers for therapeutic applications, namely the indirect activation of AMP-kinase, as well as for various industrial applications where low persistence is desirable.

  4. Get Current: Switch on Clean Energy Activity Book

    SciTech Connect

    2014-06-01

    Switching on clean energy technologies means strengthening the economy while protecting the environment. This activity book for all ages promotes energy awareness, with facts on different types of energy and a variety of puzzles in an energy theme.

  5. Calculation of protein and energy requirements in beluga sturgeon (Huso huso) using a factorial approach.

    PubMed

    Amrkolaie, A Keramat; Yansari, A Teimouri; Khalesi, M K

    2013-06-01

    This study tried to determine the protein and energy requirements of growing beluga sturgeon Huso huso using a factorial approach. The experiment was composed of four small-scale growth trails covering different weight ranges. The fish fed at 0, 20, 40, 60, 80 and 100% of satiation. DWG had a steady increase throughout the experiment following a non-linear equation as Y = 1.433 (±0.056) × Ln(X) -2.740 (±0.261); r(2) = 0.99, p < 0.001, where Y = weight gain (g/day) and X = fish weight (g). The daily requirement of digestible energy (DE) for maintenance amounted to 79.09 kJ × BW (kg)(0.8) . The daily requirement of DP for maintenance calculated as 0.93 g × BW (kg)(0.7) . The relationship between DE intake (X) and DE gain (Y) expressed as Y = -0.0004 (±0.000) X(2) + 0.600 (±0.082) X -44.95 (± 6.72). Also, the relationship between DP intake (X) and protein gain (Y) was expressed as Y = -0.019 (±0.006) X(2) + 0.548 (±0.062) X - 0.498 (±0.121). The daily requirements of energy and protein were estimated as 79.09 kJ × BW (kg)(0.8) + 2.94 × DE gain and 0.93 g × BW (kg)(0.7) + 2.63 × DP gain. Apparently, beluga sturgeon is inefficient in converting energy and protein into body tissue. Therefore, energy content of the diet should be sufficiently high to satisfy large energy demands in beluga sturgeon and also to reduce the catabolism of protein.

  6. Calculation of the Frequency Distribution of the Energy Deposition in DNA Volumes by Heavy Ions

    NASA Technical Reports Server (NTRS)

    Plante, Ianik; Cicinotta, Francis A.

    2012-01-01

    Radiation quality effects are largely determined by energy deposition in small volumes of characteristic sizes less than 10 nm representative of short-segments of DNA, the DNA nucleosome, or molecules initiating oxidative stress in the nucleus, mitochondria, or extra-cellular matrix. On this scale, qualitatively distinct types of molecular damage are possible for high linear energy transfer (LET) radiation such as heavy ions compared to low LET radiation. Unique types of DNA lesions or oxidative damages are the likely outcome of the energy deposition. The frequency distribution for energy imparted to 1-20 nm targets per unit dose or particle fluence is a useful descriptor and can be evaluated as a function of impact parameter from an ions track. In this work, the simulation of 1-Gy irradiation of a cubic volume of 5 micron by: 1) 450 (1)H(+) ions, 300 MeV; 2) 10 (12)C(6+) ions, 290 MeV/amu and 3) (56)Fe(26+) ions, 1000 MeV/amu was done with the Monte-Carlo simulation code RITRACKS. Cylindrical targets are generated in the irradiated volume, with random orientation. The frequency distribution curves of the energy deposited in the targets is obtained. For small targets (i.e. <25 nm size), the probability of an ion to hit a target is very small; therefore a large number of tracks and targets as well as a large number of histories are necessary to obtain statistically significant results. This simulation is very time-consuming and is difficult to perform by using the original version of RITRACKS. Consequently, the code RITRACKS was adapted to use multiple CPU on a workstation or on a computer cluster. To validate the simulation results, similar calculations were performed using targets with fixed position and orientation, for which experimental data are available [5]. Since the probability of single- and double-strand breaks in DNA as function of energy deposited is well know, the results that were obtained can be used to estimate the yield of DSB, and can be extended

  7. Comparison of measured and calculated concrete and rebar specific activity during decommissioning of the Dalhousie SLOWPOKE-2 reactor.

    PubMed

    Smith, Philip G; Everall, Dave; Ariani, Imelda; Tsang, Kwok

    2013-07-01

    Following the defuelling and dismantling of the Dalhousie University SLOWPOKE-2 Reactor (DUSR) in 2011, the reactor pool concrete and rebar were sampled to support the unconditional free release of the material such that the facility could be classified for unrestricted use. A detailed MCNP5 model of the critical core assembly was simulated to calculate the thermal, intermediate and fast neutron flux profile below the reactor pool floor. The neutron fluxes were used to calculate the specific activity of significant radionuclides in the concrete and rebar. The calculated specific activity and consequently the calculated neutron fluxes were validated at a number of sample locations. The calculated concrete and rebar specific activity were found to be in good agreement with the measured specific activity at the sample locations. The unrestricted use of the facility was granted through the approval of the licence to abandon the facility in August 2011.

  8. Comparison of measured and calculated concrete and rebar specific activity during decommissioning of the Dalhousie SLOWPOKE-2 reactor.

    PubMed

    Smith, Philip G; Everall, Dave; Ariani, Imelda; Tsang, Kwok

    2013-07-01

    Following the defuelling and dismantling of the Dalhousie University SLOWPOKE-2 Reactor (DUSR) in 2011, the reactor pool concrete and rebar were sampled to support the unconditional free release of the material such that the facility could be classified for unrestricted use. A detailed MCNP5 model of the critical core assembly was simulated to calculate the thermal, intermediate and fast neutron flux profile below the reactor pool floor. The neutron fluxes were used to calculate the specific activity of significant radionuclides in the concrete and rebar. The calculated specific activity and consequently the calculated neutron fluxes were validated at a number of sample locations. The calculated concrete and rebar specific activity were found to be in good agreement with the measured specific activity at the sample locations. The unrestricted use of the facility was granted through the approval of the licence to abandon the facility in August 2011. PMID:23658212

  9. Calculs Monte Carlo en transport d'energie pour le calcul de la dose en radiotherapie sur plateforme graphique hautement parallele

    NASA Astrophysics Data System (ADS)

    Hissoiny, Sami

    Dose calculation is a central part of treatment planning. The dose calculation must be 1) accurate so that the medical physicists and the radio-oncologists can make a decision based on results close to reality and 2) fast enough to allow a routine use of dose calculation. The compromise between these two factors in opposition gave way to the creation of several dose calculation algorithms, from the most approximate and fast to the most accurate and slow. The most accurate of these algorithms is the Monte Carlo method, since it is based on basic physical principles. Since 2007, a new computing platform gains popularity in the scientific computing community: the graphics processor unit (GPU). The hardware platform exists since before 2007 and certain scientific computations were already carried out on the GPU. Year 2007, on the other hand, marks the arrival of the CUDA programming language which makes it possible to disregard graphic contexts to program the GPU. The GPU is a massively parallel computing platform and is adapted to data parallel algorithms. This thesis aims at knowing how to maximize the use of a graphics processing unit (GPU) to speed up the execution of a Monte Carlo simulation for radiotherapy dose calculation. To answer this question, the GPUMCD platform was developed. GPUMCD implements the simulation of a coupled photon-electron Monte Carlo simulation and is carried out completely on the GPU. The first objective of this thesis is to evaluate this method for a calculation in external radiotherapy. Simple monoenergetic sources and phantoms in layers are used. A comparison with the EGSnrc platform and DPM is carried out. GPUMCD is within a gamma criteria of 2%-2mm against EGSnrc while being at least 1200x faster than EGSnrc and 250x faster than DPM. The second objective consists in the evaluation of the platform for brachytherapy calculation. Complex sources based on the geometry and the energy spectrum of real sources are used inside a TG-43

  10. Active Control by Conservation of Energy Concept

    NASA Technical Reports Server (NTRS)

    Maestrello, Lucio

    2000-01-01

    Three unrelated experiments are discussed; each was extremely sensitive to initial conditions. The initial conditions are the beginnings of the origins of the information that nonlinearity displays. Initial conditions make the phenomenon unstable and unpredictable. With the knowledge of the initial conditions, active control requires far less power than that present in the system response. The first experiment is on the control of shocks from an axisymmetric supersonic jet; the second, control of a nonlinear panel response forced by turbulent boundary layer and sound; the third, control of subharmonic and harmonics of a panel forced by sound. In all three experiments, control is achieved by redistribution of periodic energy response such that the energy is nearly preserved from a previous uncontrolled state. This type of active control improves the performance of the system being controlled.

  11. Methods for calculating the entropy and free energy and their application to problems involving protein flexibility and ligand binding.

    PubMed

    Meirovitch, Hagai; Cheluvaraja, Srinath; White, Ronald P

    2009-06-01

    The Helmholtz free energy, F and the entropy, S are related thermodynamic quantities with a special importance in structural biology. We describe the difficulties in calculating these quantities and review recent methodological developments. Because protein flexibility is essential for function and ligand binding, we discuss the related problems involved in the definition, simulation, and free energy calculation of microstates (such as the alpha-helical region of a peptide). While the review is broad, a special emphasize is given to methods for calculating the absolute F (S), where our HSMC(D) method is described in some detail. PMID:19519453

  12. Restricted second random phase approximations and Tamm-Dancoff approximations for electronic excitation energy calculations

    NASA Astrophysics Data System (ADS)

    Peng, Degao; Yang, Yang; Zhang, Peng; Yang, Weitao

    2014-12-01

    In this article, we develop systematically second random phase approximations (RPA) and Tamm-Dancoff approximations (TDA) of particle-hole and particle-particle channels for calculating molecular excitation energies. The second particle-hole RPA/TDA can capture double excitations missed by the particle-hole RPA/TDA and time-dependent density-functional theory (TDDFT), while the second particle-particle RPA/TDA recovers non-highest-occupied-molecular-orbital excitations missed by the particle-particle RPA/TDA. With proper orbital restrictions, these restricted second RPAs and TDAs have a formal scaling of only O(N4). The restricted versions of second RPAs and TDAs are tested with various small molecules to show some positive results. Data suggest that the restricted second particle-hole TDA (r2ph-TDA) has the best overall performance with a correlation coefficient similar to TDDFT, but with a larger negative bias. The negative bias of the r2ph-TDA may be induced by the unaccounted ground state correlation energy to be investigated further. Overall, the r2ph-TDA is recommended to study systems with both single and some low-lying double excitations with a moderate accuracy. Some expressions on excited state property evaluations, such as < hat{S}2rangle are also developed and tested.

  13. Long-term comparison of energy flux calculation methods over an agricultural field

    NASA Astrophysics Data System (ADS)

    Kolle, O.

    1996-05-01

    Since March 1990 micrometeorological measurements were carried out over an agricultural field with varying land use (wheat, barley, sunflowers, mustard) using a profile mast and an energy balance mast with an eddy correlation system for the sensible heat flux. Soil temperature, soil heat flux, soil moisture and precipitation were measured as well. Long-term measurements allow statistical analysis of the energy fluxes and comparisons of different methods for their calculation (eddy correlation, flux profile, Bowen ratio and the residual method). For the sensible heat flux a good agreement was found using these different methods after applying all necessary corrections. The latent heat flux shows greater deviations in the daily cycle between the flux profile method and the residual method due to the shape of the humidity profiles which often and especially at night show a maximum at heights between 1 m and 4 m, even if the soil is free of vegetation. This could be a consequence of the patchiness of the agricultural area, the position of the station on top of a hillock or high water absorption of the soil, respectively. The residual method seems to give more reliable results for the actual evapotranspiration than the flux profile method or the Bowen ratio method if an eddy correlation system is used to determine the sensible heat flux. Differences in the soil heat flux measured with heat flux plates and determined using the profiles of soil temperature and soil moisture can be explained by the heat flux plates being a disturbance to the soil matrix.

  14. Restricted second random phase approximations and Tamm-Dancoff approximations for electronic excitation energy calculations

    SciTech Connect

    Peng, Degao; Yang, Yang; Zhang, Peng; Yang, Weitao

    2014-12-07

    In this article, we develop systematically second random phase approximations (RPA) and Tamm-Dancoff approximations (TDA) of particle-hole and particle-particle channels for calculating molecular excitation energies. The second particle-hole RPA/TDA can capture double excitations missed by the particle-hole RPA/TDA and time-dependent density-functional theory (TDDFT), while the second particle-particle RPA/TDA recovers non-highest-occupied-molecular-orbital excitations missed by the particle-particle RPA/TDA. With proper orbital restrictions, these restricted second RPAs and TDAs have a formal scaling of only O(N{sup 4}). The restricted versions of second RPAs and TDAs are tested with various small molecules to show some positive results. Data suggest that the restricted second particle-hole TDA (r2ph-TDA) has the best overall performance with a correlation coefficient similar to TDDFT, but with a larger negative bias. The negative bias of the r2ph-TDA may be induced by the unaccounted ground state correlation energy to be investigated further. Overall, the r2ph-TDA is recommended to study systems with both single and some low-lying double excitations with a moderate accuracy. Some expressions on excited state property evaluations, such as 〈S{sup ^2}〉 are also developed and tested.

  15. Momentum or kinetic energy - how do substrate properties influence the calculation of rainfall erosivity?

    NASA Astrophysics Data System (ADS)

    Goebes, Philipp; Seitz, Steffen; Geißler, Christian; Lassu, Tamás; Peters, Piet; Seeger, Manuel; Nadrowski, Karin; Scholten, Thomas

    2014-05-01

    Rainfall erosivity is a key component in soil erosion by water. In principle, two ways exist to describe erosivity, namely kinetic energy and momentum. However, the role of mass and velocity of raindrops in relation to properties of the substrates to be eroded is not yet clear. In our study we conducted rainfall simulation experiments to determine splash detachment amounts of five substrates (coarse sand, medium sand, fine sand, PE balls, silt) for seven different rainfall intensities (52-116 mm/h). We used linear mixed-effect modeling (LME) to calculate erosivity predictors for each substrate. Additionally, we separated drop size distribution into 1st and 3rd quartile to investigate the effect of small and slow respectively big and fast raindrops on splash detachment amounts. We suggest using momentum divided by drop diameter as a substrate-independent erosivity predictor. To consider different substrates specific erosivity parameters are needed. Heavier substrates like sand are best described by kinetic energy multiplied by diameter whereas lighter substrates like silt point to momentum divided by diameter to the power of 1.5. Further, our results show that the first quartile of the drop size distribution is best in describing splash detachment rates of light substrates whereas for heavier substrates like sand the influence of drop size distribution is indifferent.

  16. Assessment of Uncertainty in the Determination of Activation Energy for Polymeric Materials

    NASA Technical Reports Server (NTRS)

    Darby, Stephania P.; Landrum, D. Brian; Coleman, Hugh W.

    1998-01-01

    An assessment of the experimental uncertainty in obtaining the kinetic activation energy from thermogravimetric analysis (TGA) data is presented. A neat phenolic resin, Borden SC1O08, was heated at three heating rates to obtain weight loss vs temperature data. Activation energy was calculated by two methods: the traditional Flynn and Wall method based on the slope of log(q) versus 1/T, and a modification of this method where the ordinate and abscissa are reversed in the linear regression. The modified method produced a more accurate curve fit of the data, was more sensitive to data nonlinearity, and gave a value of activation energy 75 percent greater than the original method. An uncertainty analysis using the modified method yielded a 60 percent uncertainty in the average activation energy. Based on this result, the activation energy for a carbon-phenolic material was doubled and used to calculate the ablation rate In a typical solid rocket environment. Doubling the activation energy increased surface recession by 3 percent. Current TGA data reduction techniques that use the traditional Flynn and Wall approach to calculate activation energy should be changed to the modified method.

  17. A collision history-based approach to Sensitivity/Perturbation calculations in the continuous energy Monte Carlo code SERPENT

    SciTech Connect

    Giuseppe Palmiotti

    2015-05-01

    In this work, the implementation of a collision history-based approach to sensitivity/perturbation calculations in the Monte Carlo code SERPENT is discussed. The proposed methods allow the calculation of the eects of nuclear data perturbation on several response functions: the eective multiplication factor, reaction rate ratios and bilinear ratios (e.g., eective kinetics parameters). SERPENT results are compared to ERANOS and TSUNAMI Generalized Perturbation Theory calculations for two fast metallic systems and for a PWR pin-cell benchmark. New methods for the calculation of sensitivities to angular scattering distributions are also presented, which adopts fully continuous (in energy and angle) Monte Carlo estimators.

  18. Implications of mountain shading on calculating energy for snowmelt using unstructured triangular meshes

    NASA Astrophysics Data System (ADS)

    Marsh, C.; Pomeroy, J. W.; Spiteri, R.

    2012-12-01

    In many parts of the world, the snowmelt energy balance is dominated by net solar shortwave radiation. This is the case in the Canadian Rocky Mountains, where clear skies dominate the winter and spring. In mountainous regions, irradiance at the snow surface is not only affected by solar angles, atmospheric transmittance, and the slope and aspect of immediate topography, but also by horizon-shadows, i.e., shadows from surrounding terrain. Many hydrological models do not consider such horizon-shadows and the accumulation of errors in estimating solar irradiance by neglecting horizon-shadows may lead to significant errors in calculating the timing and rate of snowmelt due to the seasonal storage of internal energy in the snowpack. An unstructured triangular-mesh-based horizon-shading model is compared to standard self-shading algorithms in the Marmot Creek Research Basin (MCRB), Alberta, Canada. A systematic basin-wide over-prediction (basin mean expressed as phase change mass (assumed constant albedo of 0.8): 14 mm, maximum: 200 mm) in net shortwave radiation is observed when only self-shading is considered. The horizon-shadow model is run at a point scale at three sites throughout the MCRB to investigate the effects of topographic scale on the model results. In addition, the model results are compared to measurements of mountain shadows via orthorectified timelapse digital photographs and measured surface irradiance. The horizon-model irradiance data are used to drive a point-scale energy balance model, SNOBAL, via The Cold Regions Hydrological Model, an HRU-based hydrologic model. Melt timing is shown to differ by up to four days by neglecting horizon-shadows. It is further hypothesized that the errors might be much larger in basins with more rugged topography. Finally, a consideration of the intersection of unstructured-mesh and HRU landscape representations is discussed.

  19. Conformational evaluation of DNA-carcinogen adducts using semi-empirical potential energy calculations

    SciTech Connect

    Verna, L.K.

    1992-01-01

    The covalent attachment of an aromatic amine to guanine C8 can produce a conformational change within the DNA molecule. This conformational change is likely to influence the altered DNA's biological capacity. The author used semi-empirical potential energy calculations to evaluate conformational patterns of DNA-aromatic amine adducts using the series: aniline, 4-aminobiphenyl, 2-aminofluorene and 1-aminopyrene. An exhaustive search was made of the conformational space for carcinogen modified two-base sequences. Information was incorporated into single stranded modified trimers. Modified strands were incorporated in duplex trimers. Nine-base modified duplexes were constructed and evaluated. This procedure produced distinctly different patterns for each aromatic amine investigated. It was apparent that the base sequence in which the carcinogen modification was found was crucial to the conformational change produced. At the dimer level, aniline allows both syn and anti guanine orientations at the carcinogen modification site. There were base-base and base-carcinogen stacked states, suggesting a flexible adduct easily able to assume many conformations. 4-Aminobiphenyl attachment resulted in low energy base-carcinogen stacked states, and a guanine torsion predominantly in a low syn orientation. The flexibility of this adduct was greatly reduced from that of the aniline adduct. 2-Aminofluorene adducts assumed more of a conformational mix. The major portion was base-base stacked with modified guanine anti, with a portion with base-carcinogen stacking and guanine syn or low syn. 1-Aminopyrene adducts were inflexible. The majority assumed a base-carcinogen stack with guanine syn. The conformational profiles of large modified pieces provided details of a unique low energy wedge conformation, in which aminofluorene, particularly, was able to fit into the minor groove with very little helix distortion.

  20. Full-dimensional vibrational calculations for H5O2+ using an ab initio potential energy surface

    NASA Astrophysics Data System (ADS)

    McCoy, Anne B.; Huang, Xinchuan; Carter, Stuart; Landeweer, Marc Y.; Bowman, Joel M.

    2005-02-01

    We report quantum diffusion Monte Carlo (DMC) and variational calculations in full dimensionality for selected vibrational states of H5O2+ using a new ab initio potential energy surface [X. Huang, B. Braams, and J. M. Bowman, J. Chem. Phys. 122, 044308 (2005)]. The energy and properties of the zero-point state are focused on in the rigorous DMC calculations. OH-stretch fundamentals are also calculated using "fixed-node" DMC calculations and variationally using two versions of the code MULTIMODE. These results are compared with infrared multiphoton dissociation measurements of Yeh et al. [L. I. Yeh, M. Okumura, J. D. Myers, J. M. Price, and Y. T. Lee, J. Chem. Phys. 91, 7319 (1989)]. Some preliminary results for the energies of several modes of the shared hydrogen are also reported.

  1. Exploring Interaction of TNF and Orthopoxviral CrmB Protein by Surface Plasmon Resonance and Free Energy Calculation

    PubMed Central

    Ivanisenko, Nikita V.; Tregubchak, Tatiana V.; Saik, Olga V.; Ivanisenko, Vladimir A.; Shchelkunov, Sergei N.

    2014-01-01

    Inhibition of the activity of the tumor necrosis factor (TNF) has become the main strategy for treating inflammatory diseases. The orthopoxvirus TNF-binding proteins can bind and efficiently neutralize TNF. To analyze the mechanisms of the interaction between human (hTNF) or mouse (mTNF) TNF and the cowpox virus N-terminal binding domain (TNFBD-CPXV), also the variola virus N-terminal binding domain (TNFBD-VARV) and to define the amino acids most importantly involved in the formation of complexes, computer models, derived from the X-ray structure of a homologous hTNF/TNFRII complex, were used together with experiments. The hTNF/TNFBD-CPXV, hTNF/TNFBD-VARV, mTNF/TNFBD-CPXV, and mTNF/TNFBD-VARV complexes were used in the molecular dynamics (MD) simulations and MM/GBSA free energy calculations. The complexes were ordered as hTNF/TNFBD-CPXV, hTNF/TNFBD-VARV, mTNF/TNFBD-CPXV and mTNF/TNFBD-VARV according to increase in the binding affinity. The calculations were in agreement with surface plasmon resonance (SPR) measurements of the binding constants. Key residues involved in complex formation were identified. PMID:25101631

  2. Accurate high level ab initio-based global potential energy surface and dynamics calculations for ground state of CH2(+).

    PubMed

    Li, Y Q; Zhang, P Y; Han, K L

    2015-03-28

    A global many-body expansion potential energy surface is reported for the electronic ground state of CH2 (+) by fitting high level ab initio energies calculated at the multireference configuration interaction level with the aug-cc-pV6Z basis set. The topographical features of the new global potential energy surface are examined in detail and found to be in good agreement with those calculated directly from the raw ab initio energies, as well as previous calculations available in the literature. In turn, in order to validate the potential energy surface, a test theoretical study of the reaction CH(+)(X(1)Σ(+))+H((2)S)→C(+)((2)P)+H2(X(1)Σg (+)) has been carried out with the method of time dependent wavepacket on the title potential energy surface. The total integral cross sections and the rate coefficients have been calculated; the results determined that the new potential energy surface can both be recommended for dynamics studies of any type and as building blocks for constructing the potential energy surfaces of larger C(+)/H containing systems.

  3. Individual differences in mathematical competence predict parietal brain activation during mental calculation.

    PubMed

    Grabner, Roland H; Ansari, Daniel; Reishofer, Gernot; Stern, Elsbeth; Ebner, Franz; Neuper, Christa

    2007-11-01

    Functional neuroimaging studies have revealed that parietal brain circuits subserve arithmetic problem solving and that their recruitment dynamically changes as a function of training and development. The present study investigated whether the brain activation during mental calculation is also modulated by individual differences in mathematical competence. Twenty-five adult students were selected from a larger pool based on their performance on standardized tests of intelligence and arithmetic and divided into groups of individuals with relatively lower and higher mathematical competence. These groups did not differ in their non-numerical intelligence or age. In an fMRI block-design, participants had to verify the correctness of single-digit and multi-digit multiplication problems. Analyses revealed that the individuals with higher mathematical competence displayed stronger activation of the left angular gyrus while solving both types of arithmetic problems. Additional correlational analyses corroborated the association between individual differences in mathematical competence and angular gyrus activation, even when variability in task performance was controlled for. These findings demonstrate that the recruitment of the left angular gyrus during arithmetic problem solving underlies individual differences in mathematical ability and suggests a stronger reliance on automatic, language-mediated processes in more competent individuals.

  4. Coupling hydrodynamics and radiation calculations for star-jet interactions in active galactic nuclei

    NASA Astrophysics Data System (ADS)

    de la Cita, V. M.; Bosch-Ramon, V.; Paredes-Fortuny, X.; Khangulyan, D.; Perucho, M.

    2016-06-01

    Context. Stars and their winds can contribute to the non-thermal emission in extragalactic jets. Because of the complexity of jet-star interactions, the properties of the resulting emission are closely linked to those of the emitting flows. Aims: We simulate the interaction between a stellar wind and a relativistic extragalactic jet and use the hydrodynamic results to compute the non-thermal emission under different conditions. Methods: We performed relativistic axisymmetric hydrodynamical simulations of a relativistic jet interacting with a supersonic, non-relativistic stellar wind. We computed the corresponding streamlines out of the simulation results and calculated the injection, evolution, and emission of non-thermal particles accelerated in the jet shock, focusing on electrons or e±-pairs. Several cases were explored, considering different jet-star interaction locations, magnetic fields, and observer lines of sight. The jet luminosity and star properties were fixed, but the results are easily scalable when these parameters are changed. Results: Individual jet-star interactions produce synchrotron and inverse Compton emission that peaks from X-rays to MeV energies (depending on the magnetic field), and at ~100-1000 GeV (depending on the stellar type), respectively. The radiation spectrum is hard in the scenarios explored here as a result of non-radiative cooling dominance, as low-energy electrons are efficiently advected even under relatively high magnetic fields. Interactions of jets with cold stars lead to an even harder inverse Compton spectrum because of the Klein-Nishina effect in the cross section. Doppler boosting has a strong effect on the observer luminosity. Conclusions: The emission levels for individual interactions found here are in the line of previous, more approximate, estimates, strengthening the hypothesis that collective jet-star interactions could significantly contribute at high energies under efficient particle acceleration.

  5. Synthesis, crystal structure, biological activity and theoretical calculations of novel isoxazole derivatives

    NASA Astrophysics Data System (ADS)

    Jin, R. Y.; Sun, X. H.; Liu, Y. F.; Long, W.; Chen, B.; Shen, S. Q.; Ma, H. X.

    2016-01-01

    Series of isoxazole derivatives were synthesized by substituted chalcones and 2-chloro-6-fluorobenzene formaldehyde oxime with 1,3-dipolar cycloaddition. The target compounds were determined by melting point, IR, 1H NMR, elemental analyses and HRMS. The crystal structure of compound 3a was detected by X-ray diffraction and it crystallizes in the triclinic space group p2(1)/c with z = 4. The molecular geometry of compound 3a was optimized using density functional theory (DFT/B3LYP) method with the 6-31G+(d,p) basis set in the ground state. From the optimized geometry of the molecule, FT-IR, FT-Raman, HOMO-LUMO and natural bond orbital (NBO) were calculated at B3LYP/6-31G+(d,p) level. Finally, the antifungal activity of the synthetic compounds were evaluated against Pythium solani, Gibberella nicotiancola, Fusarium oxysporium f.sp. niveum and Gibberella saubinetii.

  6. A new tool for radiation exposure calculations in aircraft flights during disturbed solar activity periods

    NASA Astrophysics Data System (ADS)

    Paschalis, Pavlos; Tezari, Anastasia; Gerontidou, Maria; Mavromichalaki, Helen

    2016-04-01

    Galactic cosmic rays and solar energetic particles can penetrate the Earth's atmosphere and interact with its molecules, which can cause atmospheric showers of secondary particles that are detected by ground based neutron monitor detectors. The cascades are of great importance for the study of the radiation exposure of aircraft crews. A new Geant4 software application is presented based on DYASTIMA (Dynamic Atmospheric Shower Tracking Interactive Model Application), which calculates the effective dose that aviators may receive in different flight scenarios characterized by different altitudes and different flight routes, during quiet and disturbed solar and cosmic ray activity. The concept is based on Monte Carlo simulations by using phantoms for the aircraft and the aviator and experimenting with different shielding materials.

  7. Many-body calculation of the surface-state energies for Si(111)2 times 1

    SciTech Connect

    Northrup, J.E.; Hybertsen, M.S.; Louie, S.G. AT T Bell Laboratories, 600 Mountain Avenue, Murray Hill, New Jersey 07094 Department of Physics, University of California, Berkeley, California 94720 Materials and Chemical Sciences Division, Lawrence Berkeley Laboratory, Berkeley, California 94720)

    1991-01-28

    The surface-state excitation energies for the Si(111)2{times}1 surface have been calculated in the {ital GW} approximation. The energy position and the dispersion of the occupied and empty surface states are in excellent agreement with photoemission and inverse-photoemission experiments. The calculated quasiparticle surface-state band gap, 0.62 eV, is 0.15 eV larger than the measured onset energy for electron-hole pair excitations. The possibility that excitonic effects are responsible for this difference is examined.

  8. Addendum to triton and hypertriton binding energies calculated from SU{sub 6} quark-model baryon-baryon interactions

    SciTech Connect

    Fujiwara, Y.; Suzuki, Y.; Kohno, M.; Miyagawa, K.

    2008-02-15

    Previously we calculated the binding energies of the triton and hypertriton, using an SU{sub 6} quark-model interaction obtained by a resonating-group method of two baryon clusters. In contrast to the previous calculations employing the energy-dependent interaction kernel, we present new results using a renormalized interaction that is energy-independent and still preserves all the two-baryon data. The new binding energies are slightly smaller than the previous values. In particular the triton binding energy turns out to be 8.14 MeV with a charge-dependence correction of the two-nucleon force, 190 keV, being included. This indicates that the energy to be accounted for by three-body forces is about 350 keV.

  9. An algorithm for the uniform sampling of iso-energy surfaces and for the calculation of microcanonical averages.

    PubMed

    Rapallo, Arnaldo

    2006-03-01

    In this article an algorithm is proposed to efficiently perform the uniform sampling of an iso-energy surface corresponding to a fixed potential energy U of a molecular system, and for calculating averages of certain quantities over microstates having this energy (microcanonical averages). The developed sampling technique is based upon the combination of a recently proposed method for performing constant potential energy molecular dynamics simulations [Rapallo, A. J Chem Phys 2004, 121, 4033] with well-established thermostatting techniques used in the framework of standard molecular dynamics simulations, such as the Andersen thermostat, and the Nose-Hoover chain thermostat. The proposed strategy leads to very accurate and drift-free potential energy conservation during the whole sampling process, and, very important, specially when dealing with high-dimensional or complicated potential functions, it does not require the calculation of the potential energy function hessian. The technique proved to be very reliable for sampling both low- and high-dimensional surfaces.

  10. DFT calculations, spectroscopy and antioxidant activity studies on (E)-2-nitro-4-[(phenylimino)methyl]phenol

    NASA Astrophysics Data System (ADS)

    Temel, Ersin; Alaşalvar, Can; Gökçe, Halil; Güder, Aytaç; Albayrak, Çiğdem; Alpaslan, Yelda Bingöl; Alpaslan, Gökhan; Dilek, Nefise

    2015-02-01

    We have reported synthesis and characterization of (E)-2-nitro-4-[(phenylimino)methyl]phenol by using X-ray crystallographic method, FT-IR and UV-vis spectroscopies and density functional theory (DFT). Optimized geometry and vibrational frequencies of the title compound in the ground state have been computed by using B3LYP with the 6-311G+(d,p) basis set. HOMO-LUMO energy gap, Non-linear optical properties and NBO analysis of the compound are performed at B3LYP/6-311G+(d,p) level. Additionally, as remarkable properties, antioxidant activity of the title compound (CMPD) has been determined by using different antioxidant test methods i.e. ferric reducing antioxidant power (FRAP), hydrogen peroxide scavenging (HPSA), free radical scavenging (FRSA) and ferrous ion chelating activities (FICA). When compared with standards (BHA, BHT, and α-tocopherol), we have concluded that CPMD has effective FRAP, HPSA, FRSA and FICA.

  11. Dose calculation for photon-emitting brachytherapy sources with average energy higher than 50 keV: Report of the AAPM and ESTRO

    SciTech Connect

    Perez-Calatayud, Jose; Ballester, Facundo; Das, Rupak K.; DeWerd, Larry A.; Ibbott, Geoffrey S.; Meigooni, Ali S.; Ouhib, Zoubir; Rivard, Mark J.; Sloboda, Ron S.; Williamson, Jeffrey F.

    2012-05-15

    Purpose: Recommendations of the American Association of Physicists in Medicine (AAPM) and the European Society for Radiotherapy and Oncology (ESTRO) on dose calculations for high-energy (average energy higher than 50 keV) photon-emitting brachytherapy sources are presented, including the physical characteristics of specific {sup 192}Ir, {sup 137}Cs, and {sup 60}Co source models. Methods: This report has been prepared by the High Energy Brachytherapy Source Dosimetry (HEBD) Working Group. This report includes considerations in the application of the TG-43U1 formalism to high-energy photon-emitting sources with particular attention to phantom size effects, interpolation accuracy dependence on dose calculation grid size, and dosimetry parameter dependence on source active length. Results: Consensus datasets for commercially available high-energy photon sources are provided, along with recommended methods for evaluating these datasets. Recommendations on dosimetry characterization methods, mainly using experimental procedures and Monte Carlo, are established and discussed. Also included are methodological recommendations on detector choice, detector energy response characterization and phantom materials, and measurement specification methodology. Uncertainty analyses are discussed and recommendations for high-energy sources without consensus datasets are given. Conclusions: Recommended consensus datasets for high-energy sources have been derived for sources that were commercially available as of January 2010. Data are presented according to the AAPM TG-43U1 formalism, with modified interpolation and extrapolation techniques of the AAPM TG-43U1S1 report for the 2D anisotropy function and radial dose function.

  12. Advances in binding free energies calculations: QM/MM-based free energy perturbation method for drug design.

    PubMed

    Rathore, R S; Sumakanth, M; Reddy, M Siva; Reddanna, P; Rao, Allam Appa; Erion, Mark D; Reddy, M R

    2013-01-01

    Multiple approaches have been devised and evaluated to computationally estimate binding free energies. Results using a recently developed Quantum Mechanics (QM)/Molecular Mechanics (MM) based Free Energy Perturbation (FEP) method suggest that this method has the potential to provide the most accurate estimation of binding affinities to date. The method treats ligands/inhibitors using QM while using MM for the rest of the system. The method has been applied and validated for a structurally diverse set of fructose 1,6- bisphosphatase (FBPase) inhibitors suggesting that the approach has the potential to be used as an integral part of drug discovery for both lead identification lead optimization, where there is a structure available. In addition, this QM/MM-based FEP method was shown to accurately replicate the anomalous hydration behavior exhibited by simple amines and amides suggesting that the method may also prove useful in predicting physical properties of molecules. While the method is about 5-fold more computationally demanding than conventional FEP, it has the potential to be less demanding on the end user since it avoids development of MM force field parameters for novel ligands and thereby eliminates this time-consuming step that often contributes significantly to the inaccuracy of binding affinity predictions using conventional FEP methods. The QM/MM-based FEP method has been extensively tested with respect to important considerations such as the length of the simulation required to obtain satisfactory convergence in the calculated relative solvation and binding free energies for both small and large structural changes between ligands. Future automation of the method and parallelization of the code is expected to enhance the speed and increase its use for drug design and lead optimization. PMID:23260025

  13. Energy and Man's Environment Activity Guide: An Interdisciplinary Teacher's Guide to Energy and Environmental Activities, Section One - Sources of Energy.

    ERIC Educational Resources Information Center

    Jones, John, Ed.

    This publication presents the activities pertaining to the first goal of this activity guide series. The activities in this publication focus primarily on the availability of resources, forms of energy, natural laws, and socioeconomic considerations. These materials are appropriate for middle school and junior high school students. These…

  14. Energy Adventure Center. Activity Book. Revised [and Expanded] Edition.

    ERIC Educational Resources Information Center

    Wichita Unified School District 259, KS.

    A variety of energy activities are provided, including instructions for and questions related to energy films. The activities are organized into five sections. Section 1 (work) includes an activity focusing on movement and change. Section 2 (forms of energy) includes activities related to mechanical (movement), radiant (light), chemical (burning),…

  15. Energy balance, physical activity, and cancer risk.

    PubMed

    Fair, Alecia Malin; Montgomery, Kara

    2009-01-01

    This chapter posits that cancer is a complex and multifactorial process as demonstrated by the expression and production of key endocrine and steroid hormones that intermesh with lifestyle factors (physical activity, body size, and diet) in combination to heighten cancer risk. Excess weight has been associated with increased mortality from all cancers combined and for cancers of several specific sites. The prevalence of obesity has reached epidemic levels in many parts of the world; more than 1 billion adults are overweight with a body mass index (BMI) exceeding 25. Overweight and obesity are clinically defined indicators of a disease process characterized by the accumulation of body fat due to an excess of energy intake (nutritional intake) relative to energy expenditure (physical activity). When energy intake exceeds energy expenditure over a prolonged period of time, the result is a positive energy balance (PEB), which leads to the development of obesity. This physical state is ideal for intervention and can be modulated by changes in energy intake, expenditure, or both. Nutritional intake is a modifiable factor in the energy balance-cancer linkage primarily tested by caloric restriction studies in animals and the effect of energy availability. Restriction of calories by 10 to 40% has been shown to decrease cell proliferation, increasing apoptosis through anti-angiogenic processes. The potent anticancer effect of caloric restriction is clear, but caloric restriction alone is not generally considered to be a feasible strategy for cancer prevention in humans. Identification and development of preventive strategies that "mimic" the anticancer effects of low energy intake are desirable. The independent effect of energy intake on cancer risk has been difficult to estimate because body size and physical activity are strong determinants of total energy expenditure. The mechanisms that account for the inhibitory effects of physical activity on the carcinogenic process

  16. On problems of calculating energy expenditure and substrate utilization from respiratory exchange data.

    PubMed

    Schutz, Y

    1997-12-01

    Indirect calorimetry based on respiratory exchange measurement has been successfully used from the beginning of the century to obtain an estimate of heat production (energy expenditure) in human subjects and animals. The errors inherent to this classical technique can stem from various sources: 1) model of calculation and assumptions, 2) calorimetric factors used, 3) technical factors and 4) human factors. The physiological and biochemical factors influencing the interpretation of calorimetric data include a change in the size of the bicarbonate and urea pools and the accumulation or loss (via breath, urine or sweat) of intermediary metabolites (gluconeogenesis, ketogenesis). More recently, respiratory gas exchange data have been used to estimate substrate utilization rates in various physiological and metabolic situations (fasting, post-prandial state, etc.). It should be recalled that indirect calorimetry provides an index of overall substrate disappearance rates. This is incorrectly assumed to be equivalent to substrate "oxidation" rates. Unfortunately, there is no adequate golden standard to validate whole body substrate "oxidation" rates, and this contrasts to the "validation" of heat production by indirect calorimetry, through use of direct calorimetry under strict thermal equilibrium conditions. Tracer techniques using stable (or radioactive) isotopes, represent an independent way of assessing substrate utilization rates. When carbohydrate metabolism is measured with both techniques, indirect calorimetry generally provides consistent glucose "oxidation" rates as compared to isotopic tracers, but only when certain metabolic processes (such as gluconeogenesis and lipogenesis) are minimal or / and when the respiratory quotients are not at the extreme of the physiological range. However, it is believed that the tracer techniques underestimate true glucose "oxidation" rates due to the failure to account for glycogenolysis in the tissue storing glucose, since this

  17. Absolute surface energy calculations of Wurtzite (0001)/(000-1): a study of ZnO and GaN

    NASA Astrophysics Data System (ADS)

    Zhang, Jingzhao; Zhang, Yiou; Tse, Kinfai; Deng, Bei; Xu, Hu; Zhu, Junyi

    The accurate absolute surface energies of (0001)/(000-1) surfaces of wurtzite structures are crucial in determining the thin film growth mode of important energy materials. However, the surface energies still remain to be solved due to the intrinsic difficulty of calculating dangling bond energy of asymmetrically bonded surface atoms. We used a pseudo-hydrogen passivation method to estimate the dangling bond energy and calculate the polar surfaces of ZnO and GaN. The calculations were based on the pseudo chemical potentials obtained from a set of tetrahedral clusters or simple pseudo-molecules, using density functional theory approaches, for both GGA and HSE. And the surface energies of (0001)/(000-1) surfaces of wurtzite ZnO and GaN we obtained showed relatively high self-consistencies. A wedge structure calculation with a new bottom surface passivation scheme of group I and group VII elements was also proposed and performed to show converged absolute surface energy of wurtzite ZnO polar surfaces. Part of the computing resources was provided by the High Performance Cluster Computing Centre, Hong Kong Baptist University. This work was supported by the start-up funding and direct Grant with the Project code of 4053134 at CUHK.

  18. Multi-layer Lanczos iteration approach to calculations of vibrational energies and dipole transition intensities for polyatomic molecules

    DOE PAGES

    Yu, Hua-Gen

    2015-01-28

    We report a rigorous full dimensional quantum dynamics algorithm, the multi-layer Lanczos method, for computing vibrational energies and dipole transition intensities of polyatomic molecules without any dynamics approximation. The multi-layer Lanczos method is developed by using a few advanced techniques including the guided spectral transform Lanczos method, multi-layer Lanczos iteration approach, recursive residue generation method, and dipole-wavefunction contraction. The quantum molecular Hamiltonian at the total angular momentum J = 0 is represented in a set of orthogonal polyspherical coordinates so that the large amplitude motions of vibrations are naturally described. In particular, the algorithm is general and problem-independent. An applicationmore » is illustrated by calculating the infrared vibrational dipole transition spectrum of CH₄ based on the ab initio T8 potential energy surface of Schwenke and Partridge and the low-order truncated ab initio dipole moment surfaces of Yurchenko and co-workers. A comparison with experiments is made. The algorithm is also applicable for Raman polarizability active spectra.« less

  19. Multi-layer Lanczos iteration approach to calculations of vibrational energies and dipole transition intensities for polyatomic molecules

    SciTech Connect

    Yu, Hua-Gen

    2015-01-28

    We report a rigorous full dimensional quantum dynamics algorithm, the multi-layer Lanczos method, for computing vibrational energies and dipole transition intensities of polyatomic molecules without any dynamics approximation. The multi-layer Lanczos method is developed by using a few advanced techniques including the guided spectral transform Lanczos method, multi-layer Lanczos iteration approach, recursive residue generation method, and dipole-wavefunction contraction. The quantum molecular Hamiltonian at the total angular momentum J = 0 is represented in a set of orthogonal polyspherical coordinates so that the large amplitude motions of vibrations are naturally described. In particular, the algorithm is general and problem-independent. An application is illustrated by calculating the infrared vibrational dipole transition spectrum of CH₄ based on the ab initio T8 potential energy surface of Schwenke and Partridge and the low-order truncated ab initio dipole moment surfaces of Yurchenko and co-workers. A comparison with experiments is made. The algorithm is also applicable for Raman polarizability active spectra.

  20. MAGNETIC ENERGY SPECTRA IN SOLAR ACTIVE REGIONS

    SciTech Connect

    Abramenko, Valentyna; Yurchyshyn, Vasyl

    2010-09-01

    Line-of-sight magnetograms for 217 active regions (ARs) with different flare rates observed at the solar disk center from 1997 January until 2006 December are utilized to study the turbulence regime and its relationship to flare productivity. Data from the SOHO/MDI instrument recorded in the high-resolution mode and data from the BBSO magnetograph were used. The turbulence regime was probed via magnetic energy spectra and magnetic dissipation spectra. We found steeper energy spectra for ARs with higher flare productivity. We also report that both the power index, {alpha}, of the energy spectrum, E(k) {approx} k{sup -}{alpha}, and the total spectral energy, W = {integral}E(k)dk, are comparably correlated with the flare index, A, of an AR. The correlations are found to be stronger than those found between the flare index and the total unsigned flux. The flare index for an AR can be estimated based on measurements of {alpha} and W as A = 10{sup b}({alpha}W){sup c}, with b = -7.92 {+-} 0.58 and c = 1.85 {+-} 0.13. We found that the regime of the fully developed turbulence occurs in decaying ARs and in emerging ARs (at the very early stage of emergence). Well-developed ARs display underdeveloped turbulence with strong magnetic dissipation at all scales.