Science.gov

Sample records for active colloidal fluid

  1. Active colloids

    NASA Astrophysics Data System (ADS)

    Aranson, Igor S.

    2013-01-01

    A colloidal suspension is a heterogeneous fluid containing solid microscopic particles. Colloids play an important role in our everyday life, from food and pharmaceutical industries to medicine and nanotechnology. It is useful to distinguish two major classes of colloidal suspensions: equilibrium and active, i.e., maintained out of thermodynamic equilibrium by external electric or magnetic fields, light, chemical reactions, or hydrodynamic shear flow. While the properties of equilibrium colloidal suspensions are fairly well understood, active colloids pose a formidable challenge, and the research is in its early exploratory stage. One of the most remarkable properties of active colloids is the possibility of dynamic self-assembly, a natural tendency of simple building blocks to organize into complex functional architectures. Examples range from tunable, self-healing colloidal crystals and membranes to self-assembled microswimmers and robots. Active colloidal suspensions may exhibit material properties not present in their equilibrium counterparts, e.g., reduced viscosity and enhanced self-diffusivity, etc. This study surveys the most recent developments in the physics of active colloids, both in synthetic and living systems, with the aim of elucidation of the fundamental physical mechanisms governing self-assembly and collective behavior.

  2. Colloids at Curved Fluid Interfaces

    NASA Astrophysics Data System (ADS)

    Stebe, Kathleen

    2016-11-01

    Fluid interfaces are remarkable sites for colloidal assembly. When a colloid attaches to a fluid interface, it distorts a region around it; this distortion has an associated capillary energy, the product of its area and interfacial tension. The particle's capillary energy depends on the local interface curvature. By molding the interface, we can define curvature fields that drive microparticles along pre-determined paths. This example captures the emergent nature of the interactions. We discuss curvature fields as analogues to external electro-magnetic fields, and define curvatures that drive particles to well-defined locations, and to equilibrium sites far from boundaries. Particle-particle and particle-curvature interactions can guide particles into structures via interaction among many particles. This work demonstrates the potential importance of curvature capillary interactions in schemes to make reconfigurable materials, since interfaces and their associated capillary energy landscapes can be readily reconfigured. Analogies in other soft systems will be described. Support acknowledged from NSF DMR 1607878.

  3. Nonequilibrium interfaces in colloidal fluids

    NASA Astrophysics Data System (ADS)

    Bier, Markus; Arnold, Daniel

    2013-12-01

    The time-dependent structure, interfacial tension, and evaporation of an oversaturated colloid-rich (liquid) phase in contact with an undersaturated colloid-poor (vapor) phase of a colloidal dispersion is investigated theoretically during the early-stage relaxation, where the interface is relaxing towards a local equilibrium state while the bulk phases are still out of equilibrium. Since systems of this type exhibit a clear separation of colloidal and solvent relaxation time scales with typical times of interfacial tension measurements in between, they can be expected to be suitable for analogous experimental studies, too. The major finding is that, irrespective of how much the bulk phases differ from two-phase coexistence, the interfacial structure and the interfacial tension approach those at two-phase coexistence during the early-stage relaxation process. This is a surprising observation since it implies that the relaxation towards global equilibrium of the interface is not following but preceding that of the bulk phases. Scaling forms for the local chemical potential, the flux, and the dissipation rate exhibit qualitatively different leading order contributions depending on whether an equilibrium or a nonequilibrium system is considered. The degree of nonquilibrium between the bulk phases is found to not influence the qualitative relaxation behavior (i.e., the values of power-law exponents), but to determine the quantitative deviation of the observed quantities from their values at two-phase coexistence. Whereas the underlying dynamics differs between colloidal and molecular fluids, the behavior of quantities such as the interfacial tension approaching the equilibrium values during the early-stage relaxation process, during which nonequilibrium conditions of the bulk phases are not changed, can be expected to occur for both types of systems.

  4. Kinetic arrest, dynamical transitions, and activated relaxation in dense fluids of attractive nonspherical colloids

    NASA Astrophysics Data System (ADS)

    Zhang, Rui; Schweizer, Kenneth S.

    2011-06-01

    The coupled translation-rotation activated dynamics in dense suspensions of attractive homogeneous and Janus uniaxial dicolloids are studied using microscopic statistical mechanical theory. Multiple kinetic arrest transitions and reentrant phenomena are predicted that are associated with fluid, gel, repulsive glass, attractive glass, plastic glass, and novel glass-gel states. The activated relaxation rate is a nonuniversal nonmonotonic function of attraction strength at high volume fractions due to the consequences of a change of the transient localization mechanism from caging to physical bonding.

  5. Theory of activated penetrant diffusion in viscous fluids and colloidal suspensions

    NASA Astrophysics Data System (ADS)

    Zhang, Rui; Schweizer, Kenneth S.

    2015-10-01

    We heuristically formulate a microscopic, force level, self-consistent nonlinear Langevin equation theory for activated barrier hopping and non-hydrodynamic diffusion of a hard sphere penetrant in very dense hard sphere fluid matrices. Penetrant dynamics is controlled by a rich competition between force relaxation due to penetrant self-motion and collective matrix structural (alpha) relaxation. In the absence of penetrant-matrix attraction, three activated dynamical regimes are predicted as a function of penetrant-matrix size ratio which are physically distinguished by penetrant jump distance and the nature of matrix motion required to facilitate its hopping. The penetrant diffusion constant decreases the fastest with size ratio for relatively small penetrants where the matrix effectively acts as a vibrating amorphous solid. Increasing penetrant-matrix attraction strength reduces penetrant diffusivity due to physical bonding. For size ratios approaching unity, a distinct dynamical regime emerges associated with strong slaving of penetrant hopping to matrix structural relaxation. A crossover regime at intermediate penetrant-matrix size ratio connects the two limiting behaviors for hard penetrants, but essentially disappears if there are strong attractions with the matrix. Activated penetrant diffusivity decreases strongly with matrix volume fraction in a manner that intensifies as the size ratio increases. We propose and implement a quasi-universal approach for activated diffusion of a rigid atomic/molecular penetrant in a supercooled liquid based on a mapping between the hard sphere system and thermal liquids. Calculations for specific systems agree reasonably well with experiments over a wide range of temperature, covering more than 10 orders of magnitude of variation of the penetrant diffusion constant.

  6. Theory of activated penetrant diffusion in viscous fluids and colloidal suspensions.

    PubMed

    Zhang, Rui; Schweizer, Kenneth S

    2015-10-14

    We heuristically formulate a microscopic, force level, self-consistent nonlinear Langevin equation theory for activated barrier hopping and non-hydrodynamic diffusion of a hard sphere penetrant in very dense hard sphere fluid matrices. Penetrant dynamics is controlled by a rich competition between force relaxation due to penetrant self-motion and collective matrix structural (alpha) relaxation. In the absence of penetrant-matrix attraction, three activated dynamical regimes are predicted as a function of penetrant-matrix size ratio which are physically distinguished by penetrant jump distance and the nature of matrix motion required to facilitate its hopping. The penetrant diffusion constant decreases the fastest with size ratio for relatively small penetrants where the matrix effectively acts as a vibrating amorphous solid. Increasing penetrant-matrix attraction strength reduces penetrant diffusivity due to physical bonding. For size ratios approaching unity, a distinct dynamical regime emerges associated with strong slaving of penetrant hopping to matrix structural relaxation. A crossover regime at intermediate penetrant-matrix size ratio connects the two limiting behaviors for hard penetrants, but essentially disappears if there are strong attractions with the matrix. Activated penetrant diffusivity decreases strongly with matrix volume fraction in a manner that intensifies as the size ratio increases. We propose and implement a quasi-universal approach for activated diffusion of a rigid atomic/molecular penetrant in a supercooled liquid based on a mapping between the hard sphere system and thermal liquids. Calculations for specific systems agree reasonably well with experiments over a wide range of temperature, covering more than 10 orders of magnitude of variation of the penetrant diffusion constant.

  7. Theory of activated penetrant diffusion in viscous fluids and colloidal suspensions

    SciTech Connect

    Zhang, Rui; Schweizer, Kenneth S.

    2015-10-14

    We heuristically formulate a microscopic, force level, self-consistent nonlinear Langevin equation theory for activated barrier hopping and non-hydrodynamic diffusion of a hard sphere penetrant in very dense hard sphere fluid matrices. Penetrant dynamics is controlled by a rich competition between force relaxation due to penetrant self-motion and collective matrix structural (alpha) relaxation. In the absence of penetrant-matrix attraction, three activated dynamical regimes are predicted as a function of penetrant-matrix size ratio which are physically distinguished by penetrant jump distance and the nature of matrix motion required to facilitate its hopping. The penetrant diffusion constant decreases the fastest with size ratio for relatively small penetrants where the matrix effectively acts as a vibrating amorphous solid. Increasing penetrant-matrix attraction strength reduces penetrant diffusivity due to physical bonding. For size ratios approaching unity, a distinct dynamical regime emerges associated with strong slaving of penetrant hopping to matrix structural relaxation. A crossover regime at intermediate penetrant-matrix size ratio connects the two limiting behaviors for hard penetrants, but essentially disappears if there are strong attractions with the matrix. Activated penetrant diffusivity decreases strongly with matrix volume fraction in a manner that intensifies as the size ratio increases. We propose and implement a quasi-universal approach for activated diffusion of a rigid atomic/molecular penetrant in a supercooled liquid based on a mapping between the hard sphere system and thermal liquids. Calculations for specific systems agree reasonably well with experiments over a wide range of temperature, covering more than 10 orders of magnitude of variation of the penetrant diffusion constant.

  8. Colloid Formation by Drugs in Simulated Intestinal Fluid

    PubMed Central

    2010-01-01

    Many organic molecules form colloidal aggregates in aqueous solution at micromolar concentrations. These aggregates promiscuously inhibit soluble proteins and are a major source of false positives in high-throughput screening. Several drugs also form colloidal aggregates, and there has been speculation that this may affect the absorption and distribution of at least one drug in vivo. Here we investigate the ability of drugs to form aggregates in simulated intestinal fluid. Thirty-three Biopharmaceutics Classification System (BCS) class II and class IV drugs, spanning multiple pharmacological activities, were tested for promiscuous aggregation in biochemical buffers. The 22 that behaved as aggregators were then tested for colloid formation in simulated intestinal fluid, a buffer mimicking conditions in the small intestine. Six formed colloids at concentrations equal to or lower than the concentrations reached in the gut, suggesting that aggregation may have an effect on the absorption and distribution of these drugs, and potentially others, in vivo. PMID:20426472

  9. Fluid-fluid demixing curves for colloid-polymer mixtures in a random colloidal matrix

    NASA Astrophysics Data System (ADS)

    Annunziata, Mario Alberto; Pelissetto, Andrea

    2011-12-01

    We study fluid-fluid phase separation in a colloid-polymer mixture adsorbed in a colloidal porous matrix close to the θ point. For this purpose we consider the Asakura-Oosawa model in the presence of a quenched matrix of colloidal hard spheres. We study the dependence of the demixing curve on the parameters that characterize the quenched matrix, fixing the polymer-to-colloid size ratio to 0.8. We find that, to a large extent, demixing curves depend only on a single parameter f, which represents the volume fraction which is unavailable to the colloids. We perform Monte Carlo simulations for volume fractions f equal to 40% and 70%, finding that the binodal curves in the polymer and colloid packing-fraction plane have a small dependence on disorder. The critical point instead changes significantly: for instance, the colloid packing fraction at criticality increases with increasing f. Finally, we observe for some values of the parameters capillary condensation of the colloids: a bulk colloid-poor phase is in chemical equilibrium with a colloid-rich phase in the matrix.

  10. Dense colloidal fluids form denser amorphous sediments

    PubMed Central

    Liber, Shir R.; Borohovich, Shai; Butenko, Alexander V.; Schofield, Andrew B.; Sloutskin, Eli

    2013-01-01

    We relate, by simple analytical centrifugation experiments, the density of colloidal fluids with the nature of their randomly packed solid sediments. We demonstrate that the most dilute fluids of colloidal hard spheres form loosely packed sediments, where the volume fraction of the particles approaches in frictional systems the random loose packing limit, φRLP = 0.55. The dense fluids of the same spheres form denser sediments, approaching the so-called random close packing limit, φRCP = 0.64. Our experiments, where particle sedimentation in a centrifuge is sufficiently rapid to avoid crystallization, demonstrate that the density of the sediments varies monotonically with the volume fraction of the initial suspension. We reproduce our experimental data by simple computer simulations, where structural reorganizations are prohibited, such that the rate of sedimentation is irrelevant. This suggests that in colloidal systems, where viscous forces dominate, the structure of randomly close-packed and randomly loose-packed sediments is determined by the well-known structure of the initial fluids of simple hard spheres, provided that the crystallization is fully suppressed. PMID:23530198

  11. The colloid osmotic pressures of invertebrate body fluids.

    PubMed

    Mangum, C P; Johansen, K

    1975-12-01

    Colloid osmotic pressures of the body fluids of twenty invertebrate species were measured directly. The results, which are generally lower than predicted values for the same species, pertain to several physiological questions: (1) they do not quantitatively explain the frequently observed hyperosmoticity of body fluids in species believed to be osmoconformers, indicating that the condition cannot be merely a consequence of a Gibbs-Donnan equilibrium; (2) the excess of hydrostatic over colloid osmotic pressure is very small. This result supports the hypothesis that the oxygen transport function of bloods with extracellular haemocyanins and haem proteins is limited by their colligative properties; (3) the pressure relationships and the absence of colloid osmotic activity in urine indicates that filtration contributes to urine formation in several species.

  12. Motile Fluids: Granular, Colloidal and Living

    NASA Astrophysics Data System (ADS)

    Ramaswamy, Sriram

    2014-03-01

    My talk will present our recent results from theory, simulation and experiment on flocking, swarming and instabilities in diverse realizations of active systems. The findings I will report include: flocking at a distance in vibrated granular monolayers; the active hydrodynamics of self-propelled solids; clusters, asters and oscillations in colloidal chemotaxis. Supported by a J C Bose Fellowship.

  13. Tracking liquid in drying colloidal fluids with polarized light microscopy

    NASA Astrophysics Data System (ADS)

    Cho, Kun; Park, Jung Soo; Kim, Joon Heon; Weon, Byung Mook

    2014-11-01

    When colloidal fluids dry, tracking liquid surfaces around colloids is difficult with conventional imaging techniques. Here we show that polarized light microscopy (PM) is very useful in tracking liquid surfaces during drying processes of colloidal fluids. In particular, the PM mode is not a new or difficult way but is able to visualize liquid films above colloids in real time. We demonstrate that when liquid films above colloidal particles are broken, the PM patterns appear clearly: this feature is useful to identify the moment of liquid film rupture above colloids in drying colloidal fluids. This result is helpful to improve relevant processes such as inkjet printing, painting, and nanoparticle patterning (K.C. and J.S.P. equally contributed). This work (NRF-2013R1A22A04008115) was supported by Mid-career Researcher Program through NRF grant funded by the MEST.

  14. MOLECULAR DESIGN OF COLLOIDS IN SUPERCRITICAL FLUIDS

    SciTech Connect

    Keith P. Johnston

    2009-04-06

    The environmentally benign, non-toxic, non-flammable fluids water and carbon dioxide (CO2) are the two most abundant and inexpensive solvents on earth. Emulsions of these fluids are of interest in many industrial processes, as well as CO2 sequestration and enhanced oil recovery. Until recently, formation of these emulsions required stabilization with fluorinated surfactants, which are expensive and often not environmentally friendly. In this work we overcame this severe limitation by developing a fundamental understanding of the properties of surfactants the CO2-water interface and using this knowledge to design and characterize emulsions stabilized with either hydrocarbon-based surfactants or nanoparticle stabilizers. We also discovered a new concept of electrostatic stabilization for CO2-based emulsions and colloids. Finally, we were able to translate our earlier work on the synthesis of silicon and germanium nanocrystals and nanowires from high temperatures and pressures to lower temperatures and ambient pressure to make the chemistry much more accessible.

  15. Flow dichroism in critical colloidal fluids

    SciTech Connect

    Lenstra, T. A. J.; Dhont, J. K. G.

    2001-06-01

    Due to long-range correlations and slow dynamics of concentration fluctuations in the vicinity of the gas-liquid critical point, shear flow is very effective in distorting the microstructure of near-critical fluids. The anisotropic nature of the shear-field renders the microstructure highly anisotropic, leading to dichroism. Experiments on the dichroic behavior can thus be used to test theoretical predictions on microstructural order under shear flow conditions. We performed both static and dynamic dichroism and turbidity measurements on a colloid-polymer mixture, existing of silica spheres (radius 51 nm) and polydimethylsiloxane polymer (molar weight 204 kg/mol). Sufficiently far away from the critical point, in the mean-field region, the experimental data are in good agreement with theory. Very close to the critical point, beyond mean field, for which no theory exists yet, an unexpected decrease of dichroism on approach of the critical point is observed. Moreover, we do not observe critical slowing down of shear-induced dichroism, right up to the critical point, in contrast to the turbidity.

  16. Smoothed Profile Method to Simulate Colloidal Particles in Complex Fluids

    NASA Astrophysics Data System (ADS)

    Yamamoto, Ryoichi; Nakayama, Yasuya; Kim, Kang

    A new direct numerical simulation scheme, called "Smoothed Profile (SP) method," is presented. The SP method, as a direct numerical simulation of particulate flow, provides a way to couple continuum fluid dynamics with rigid-body dynamics through smoothed profile of colloidal particle. Our formulation includes extensions to colloids in multicomponent solvents such as charged colloids in electrolyte solutions. This method enables us to compute the time evolutions of colloidal particles, ions, and host fluids simultaneously by solving Newton, advection-diffusion, and Navier-Stokes equations so that the electro-hydrodynamic couplings can be fully taken into account. The electrophoretic mobilities of charged spherical particles are calculated in several situations. The comparisons with approximation theories show quantitative agreements for dilute dispersions without any empirical parameters.

  17. Diffusion of colloidal fluids in random porous media.

    PubMed

    Chávez-Rojo, M A; Juárez-Maldonado, R; Medina-Noyola, M

    2008-04-01

    The diffusive relaxation of a colloidal fluid adsorbed in a porous medium depends on many factors, including the concentration and composition of the adsorbed colloidal fluid, the average structure of the porous matrix, and the nature of the colloid-colloid and colloid-substrate interactions. A simple manner to describe these effects is to model the porous medium as a set of spherical particles fixed in space at random positions with prescribed statistical structural properties. Within this model one may describe the relaxation of concentration fluctuations of the adsorbed fluid by simply setting to zero the short-time mobility of one species (the porous matrix) in a theory of the dynamics of equilibrium colloidal mixtures, or by extending such dynamic theory to explicitly consider the porous matrix as a random external field, as recently done in the framework of mode coupling theory [V. Krakoviack, Phys. Rev. Lett. 94, 065703 (2005)]. Here we consider the first approach and employ the self-consistent generalized Langevin equation (SCGLE) theory of the dynamics of equilibrium colloidal mixtures, to describe the dynamics of the mobile component. We focus on the short- and intermediate-time regimes, which we compare with Brownian dynamics simulations involving a binary mixture with screened Coulomb interactions for two models of the average static structure of the matrix: a porous matrix constructed by quenching configurations of an equilibrium mixture in which both species were first equilibrated together, and a preexisting matrix with prescribed average structure, in which we later add the mobile species. We conclude that in both cases, if the correct static structure factors are provided as input, the SCGLE theory correctly predicts the main features of the dynamics of the permeating fluid.

  18. Controlled assembly of jammed colloidal shells on fluid droplets.

    PubMed

    Subramaniam, Anand Bala; Abkarian, Manouk; Stone, Howard A

    2005-07-01

    Assembly of colloidal particles on fluid interfaces is a promising technique for synthesizing two-dimensional microcrystalline materials useful in fields as diverse as biomedicine, materials science, mineral flotation and food processing. Current approaches rely on bulk emulsification methods, require further chemical and thermal treatments, and are restrictive with respect to the materials used. The development of methods that exploit the great potential of interfacial assembly for producing tailored materials have been hampered by the lack of understanding of the assembly process. Here we report a microfluidic method that allows direct visualization and understanding of the dynamics of colloidal crystal growth on curved interfaces. The crystals are periodically ejected to form stable jammed shells, which we refer to as colloidal armour. We propose that the energetic barriers to interfacial crystal growth and organization can be overcome by targeted delivery of colloidal particles through hydrodynamic flows. Our method allows an unprecedented degree of control over armour composition, size and stability.

  19. Synthesis of a stable magnetite (magnetic fluid) colloid solution

    NASA Astrophysics Data System (ADS)

    Evdokimov, S. I.; Evdokimov, V. S.

    2017-01-01

    The article is dedicated to the development and investigation of conditions for obtaining the aggregate stable colloid solutions of magnetite – magnetic fluids. The developed method differs from the known ones and involves new ways of producing and stabilizing magnetic nanoparticles with a narrow particle size distribution.

  20. Ultrafast desorption of colloidal particles from fluid interfaces.

    PubMed

    Poulichet, Vincent; Garbin, Valeria

    2015-05-12

    The self-assembly of solid particles at fluid-fluid interfaces is widely exploited to stabilize emulsions and foams, and in materials synthesis. The self-assembly mechanism is very robust owing to the large capillary energy associated with particle adsorption, of the order of millions of times the thermal energy for micrometer-sized colloids. The microstructure of the interfacial colloid monolayer can also favor stability, for instance in the case of particle-stabilized bubbles, which can be indefinitely stable against dissolution due to jamming of the colloid monolayer. As a result, significant challenges arise when destabilization and particle removal are a requirement. Here we demonstrate ultrafast desorption of colloid monolayers from the interface of particle-stabilized bubbles. We drive the bubbles into periodic compression-expansion using ultrasound waves, causing significant deformation and microstructural changes in the particle monolayer. Using high-speed microscopy we uncover different particle expulsion scenarios depending on the mode of bubble deformation, including highly directional patterns of particle release during shape oscillations. Complete removal of colloid monolayers from bubbles is achieved in under a millisecond. Our method should find a broad range of applications, from nanoparticle recycling in sustainable processes to programmable particle delivery in lab-on-a-chip applications.

  1. Colloidal aggregation and dynamics in anisotropic fluids

    PubMed Central

    Mondiot, Frédéric; Botet, Robert; Snabre, Patrick; Mondain-Monval, Olivier; Loudet, Jean-Christophe

    2014-01-01

    We present experiments and numerical simulations to investigate the collective behavior of submicrometer-sized particles immersed in a nematic micellar solution. We use latex spheres with diameters ranging from 190 to 780 nm and study their aggregation properties due to the interplay of the various colloidal forces at work in the system. We found that the morphology of aggregates strongly depends on the particle size, with evidence for two distinct regimes: the biggest inclusions clump together within minutes into either compact clusters or V-like structures that are completely consistent with attractive elastic interactions. On the contrary, the smallest particles form chains elongated along the nematic axis, within comparable timescales. In this regime, Monte Carlo simulations, based on a modified diffusion-limited cluster aggregation model, strongly suggest that the anisotropic rotational Brownian motion of the clusters combined with short-range depletion interactions dominate the system coarsening; elastic interactions no longer prevail. The simulations reproduce the sharp transition between the two regimes on increasing the particle size. We provide reasonable estimates to interpret our data and propose a likely scenario for colloidal aggregation. These results emphasize the growing importance of the diffusion of species at suboptical-wavelength scales and raise a number of fundamental issues. PMID:24715727

  2. Effect of fluid-colloid interactions on the mobility of a thermophoretic microswimmer in non-ideal fluids.

    PubMed

    Fedosov, Dmitry A; Sengupta, Ankush; Gompper, Gerhard

    2015-09-07

    Janus colloids propelled by light, e.g., thermophoretic particles, offer promising prospects as artificial microswimmers. However, their swimming behavior and its dependence on fluid properties and fluid-colloid interactions remain poorly understood. Here, we investigate the behavior of a thermophoretic Janus colloid in its own temperature gradient using numerical simulations. The dissipative particle dynamics method with energy conservation is used to investigate the behavior in non-ideal and ideal-gas like fluids for different fluid-colloid interactions, boundary conditions, and temperature-controlling strategies. The fluid-colloid interactions appear to have a strong effect on the colloid behavior, since they directly affect heat exchange between the colloid surface and the fluid. The simulation results show that a reduction of the heat exchange at the fluid-colloid interface leads to an enhancement of colloid's thermophoretic mobility. The colloid behavior is found to be different in non-ideal and ideal fluids, suggesting that fluid compressibility plays a significant role. The flow field around the colloid surface is found to be dominated by a source-dipole, in agreement with the recent theoretical and simulation predictions. Finally, different temperature-control strategies do not appear to have a strong effect on the colloid's swimming velocity.

  3. Effect of fluid-colloid interactions on the mobility of a thermophoretic microswimmer in non-ideal fluids

    NASA Astrophysics Data System (ADS)

    Fedosov, Dmitry A.; Sengupta, Ankush; Gompper, Gerhard

    Janus colloids propelled by light, e.g., thermophoretic particles, offer promising prospects as artificial microswimmers. However, their swimming behavior and its dependence on fluid properties and fluid-colloid interactions remain poorly understood. Here, we investigate the behavior of a thermophoretic Janus colloid in its own temperature gradient using numerical simulations. The dissipative particle dynamics method with energy conservation is used to investigate the behavior in non-ideal and ideal-gas like fluids for different fluid-colloid interactions, boundary conditions, and temperature-controlling strategies. The fluid-colloid interactions appear to have a strong effect on the colloid behavior, since they directly affect heat exchange between the colloid surface and the fluid. The simulation results show that a reduction of the heat exchange at the fluid-colloid interface leads to an enhancement of colloid's thermophoretic mobility. The colloid behavior is found to be different in non-ideal and ideal fluids, suggesting that fluid compressibility plays a significant role. The flow field around the colloid surface is found to be dominated by a source-dipole, in agreement with the recent theoretical and simulation predictions. Finally, different temperature-control strategies do not appear to have a strong effect on the colloid's swimming velocity.

  4. Ultrafast desorption of colloidal particles from fluid interfaces

    PubMed Central

    Poulichet, Vincent; Garbin, Valeria

    2015-01-01

    The self-assembly of solid particles at fluid–fluid interfaces is widely exploited to stabilize emulsions and foams, and in materials synthesis. The self-assembly mechanism is very robust owing to the large capillary energy associated with particle adsorption, of the order of millions of times the thermal energy for micrometer-sized colloids. The microstructure of the interfacial colloid monolayer can also favor stability, for instance in the case of particle-stabilized bubbles, which can be indefinitely stable against dissolution due to jamming of the colloid monolayer. As a result, significant challenges arise when destabilization and particle removal are a requirement. Here we demonstrate ultrafast desorption of colloid monolayers from the interface of particle-stabilized bubbles. We drive the bubbles into periodic compression–expansion using ultrasound waves, causing significant deformation and microstructural changes in the particle monolayer. Using high-speed microscopy we uncover different particle expulsion scenarios depending on the mode of bubble deformation, including highly directional patterns of particle release during shape oscillations. Complete removal of colloid monolayers from bubbles is achieved in under a millisecond. Our method should find a broad range of applications, from nanoparticle recycling in sustainable processes to programmable particle delivery in lab-on-a-chip applications. PMID:25922529

  5. Shape control and compartmentalization in active colloidal cells

    PubMed Central

    Spellings, Matthew; Engel, Michael; Klotsa, Daphne; Sabrina, Syeda; Drews, Aaron M.; Nguyen, Nguyen H. P.; Bishop, Kyle J. M.; Glotzer, Sharon C.

    2015-01-01

    Small autonomous machines like biological cells or soft robots can convert energy input into control of function and form. It is desired that this behavior emerges spontaneously and can be easily switched over time. For this purpose we introduce an active matter system that is loosely inspired by biology and which we term an active colloidal cell. The active colloidal cell consists of a boundary and a fluid interior, both of which are built from identical rotating spinners whose activity creates convective flows. Similarly to biological cell motility, which is driven by cytoskeletal components spread throughout the entire volume of the cell, active colloidal cells are characterized by highly distributed energy conversion. We demonstrate that we can control the shape of the active colloidal cell and drive compartmentalization by varying the details of the boundary (hard vs. flexible) and the character of the spinners (passive vs. active). We report buckling of the boundary controlled by the pattern of boundary activity, as well as formation of core–shell and inverted Janus phase-separated configurations within the active cell interior. As the cell size is increased, the inverted Janus configuration spontaneously breaks its mirror symmetry. The result is a bubble–crescent configuration, which alternates between two degenerate states over time and exhibits collective migration of the fluid along the boundary. Our results are obtained using microscopic, non–momentum-conserving Langevin dynamics simulations and verified via a phase-field continuum model coupled to a Navier–Stokes equation. PMID:26253763

  6. Shape control and compartmentalization in active colloidal cells.

    PubMed

    Spellings, Matthew; Engel, Michael; Klotsa, Daphne; Sabrina, Syeda; Drews, Aaron M; Nguyen, Nguyen H P; Bishop, Kyle J M; Glotzer, Sharon C

    2015-08-25

    Small autonomous machines like biological cells or soft robots can convert energy input into control of function and form. It is desired that this behavior emerges spontaneously and can be easily switched over time. For this purpose we introduce an active matter system that is loosely inspired by biology and which we term an active colloidal cell. The active colloidal cell consists of a boundary and a fluid interior, both of which are built from identical rotating spinners whose activity creates convective flows. Similarly to biological cell motility, which is driven by cytoskeletal components spread throughout the entire volume of the cell, active colloidal cells are characterized by highly distributed energy conversion. We demonstrate that we can control the shape of the active colloidal cell and drive compartmentalization by varying the details of the boundary (hard vs. flexible) and the character of the spinners (passive vs. active). We report buckling of the boundary controlled by the pattern of boundary activity, as well as formation of core-shell and inverted Janus phase-separated configurations within the active cell interior. As the cell size is increased, the inverted Janus configuration spontaneously breaks its mirror symmetry. The result is a bubble-crescent configuration, which alternates between two degenerate states over time and exhibits collective migration of the fluid along the boundary. Our results are obtained using microscopic, non-momentum-conserving Langevin dynamics simulations and verified via a phase-field continuum model coupled to a Navier-Stokes equation.

  7. Colloidal stability of polymeric nanoparticles in biological fluids

    NASA Astrophysics Data System (ADS)

    Lazzari, Stefano; Moscatelli, Davide; Codari, Fabio; Salmona, Mario; Morbidelli, Massimo; Diomede, Luisa

    2012-06-01

    Estimating the colloidal stability of polymeric nanoparticles (NPs) in biological environments is critical for designing optimal preparations and to clarify the fate of these devices after administration. To characterize and quantify the physical stability of nanodevices suitable for biomedical applications, spherical NPs composed of poly-lactic acid (PLA) and poly-methyl-methacrylate (PMMA), in the range 100-200 nm, were prepared. Their stability in salt solutions, biological fluids, serum and tissue homogenates was analyzed by dynamic light scattering (DLS). The PMMA NPs remained stable in all fluids, while PLA NPs aggregated in gastric juice and spleen homogenate. The proposed stability test is therefore useful to see in advance whether NPs might aggregate when administered in vivo. To assess colloidal stability ex vivo as well, spectrophotofluorimetric analysis was employed, giving comparable results to DLS.

  8. Self-similarity in active colloid motion

    NASA Astrophysics Data System (ADS)

    Constant, Colin; Sukhov, Sergey; Dogariu, Aristide

    The self-similarity of displacements among randomly evolving systems has been used to describe the foraging patterns of animals and predict the growth of financial systems. At micron scales, the motion of colloidal particles can be analyzed by sampling their spatial displacement in time. For self-similar systems in equilibrium, the mean squared displacement increases linearly in time. However, external forces can take the system out of equilibrium, creating active colloidal systems, and making this evolution more complex. A moment scaling spectrum of the distribution of particle displacements quantifies the degree of self-similarity in the colloid motion. We will demonstrate that, by varying the temporal and spatial characteristics of the external forces, one can control the degree of self-similarity in active colloid motion.

  9. Applying Inkjet Technology to Dispense Colloidal Nanoparticle Fluids

    NASA Astrophysics Data System (ADS)

    O, Annie; Mohar, Harjyot; Hernandez, Victor; Estrada, Arturo; Munoz, Leonel; Fan, Sewan; Fatuzzo, Laura; Jimenez, Steven

    2014-03-01

    The inkjet technology is widely employed to reliably deliver nanomaterials onto a substrate medium for further characterization and processing. To explore the feasibility of inkjet deposition for colloids, a novel drop-on-demand fluid dispenser is constructed to eject various types of liquids to produce atomized droplets. To make structured nanomaterials on a substrate using inkjet techniques, it is essential to determine the dynamical properties of the droplets as they are being formed. These would include the ejection speed, acceleration, terminal velocity and flight trajectories. For measuring these dynamic parameters, we successfully dispensed propylene glycol solution in different mixing ratios. This forms a reference fluid for establishing a baseline for our investigations. Our experimental data suggest that rapidly ejected droplets can be accurately modeled using Newton's equations and Stokes' law. In this conference, we describe our experiments consisting of an innovative inkjet dispensing apparatus in synchronization with a high-resolution camera imaging system. Furthermore, we plan to discuss our research efforts in dispensing microdroplets for relevant materials, such as chemical colloidal suspensions containing nanoparticles and polymer based fluids. Department of Education grant number P031S90007.

  10. Phase behavior of charged colloids at a fluid interface

    NASA Astrophysics Data System (ADS)

    Kelleher, Colm P.; Guerra, Rodrigo E.; Hollingsworth, Andrew D.; Chaikin, Paul M.

    2017-02-01

    We study the phase behavior of a system of charged colloidal particles that are electrostatically bound to an almost flat interface between two fluids. We show that, despite the fact that our experimental system consists of only 103-104 particles, the phase behavior is consistent with the theory of melting due to Kosterlitz, Thouless, Halperin, Nelson, and Young. Using spatial and temporal correlations of the bond-orientational order parameter, we classify our samples into solid, isotropic fluid, and hexatic phases. We demonstrate that the topological defect structure we observe in each phase corresponds to the predictions of Kosterlitz-Thouless-Halperin-Nelson-Young theory. By measuring the dynamic Lindemann parameter γL(τ ) and the non-Gaussian parameter α2(τ ) of the displacements of the particles relative to their neighbors, we show that each of the phases displays distinctive dynamical behavior.

  11. Manipulating colloidal assemblies with active dopants

    NASA Astrophysics Data System (ADS)

    Ramananarivo, Sophie; Palacci, Jeremie

    2016-11-01

    The dynamics of a densely packed 2D layer of colloids can be significantly altered upon introducing a small amount of active microparticles. Those motile intruders drive the system out-of-equilibrium, which produces a variety of new complex phenomena such as the accentuation of density heterogeneities or the reorganization of crystalline colloidal structures. We investigate the altered dynamics of the passive spheres, as well as the behavior of micro-swimmers propelling in such crowded environment where interactions with passive obstacles or other active units become important. Ultimately, understanding and controlling such mixed systems could open new routes toward activity-assisted manipulation of colloids, potentially guiding the design of materials able to self-anneal their defects.

  12. Filament actuation by an active colloid at low Reynolds number

    NASA Astrophysics Data System (ADS)

    Laskar, Abhrajit; Adhikari, R.

    2017-03-01

    Active colloids and externally actuated semi-flexible filaments provide basic building blocks for designing autonomously motile micro-machines. Here, we show that a passive semi-flexible filament can be actuated and transported by attaching an active colloid to its terminus. We study the dynamics of this assembly when it is free, tethered, or clamped using overdamped equations of motion that explicitly account for active fluid flow and the forces it mediates. Linear states are destabilised by buckling instabilities to produce stable states of non-zero curvature and writhe. We demarcate boundaries of these states in the two-dimensional parameter space representing dimensionless measures of polar and apolar activity. Our proposed assembly can be used as a novel component in the design of micro-machines at low Reynolds number and to study elastic instabilities driven by ‘follower’ forces.

  13. Effect of Hydrofracking Fluid on Colloid Transport in the Unsaturated Zone

    PubMed Central

    2014-01-01

    Hydraulic fracturing is expanding rapidly in the US to meet increasing energy demand and requires high volumes of hydrofracking fluid to displace natural gas from shale. Accidental spills and deliberate land application of hydrofracking fluids, which return to the surface during hydrofracking, are common causes of environmental contamination. Since the chemistry of hydrofracking fluids favors transport of colloids and mineral particles through rock cracks, it may also facilitate transport of in situ colloids and associated pollutants in unsaturated soils. We investigated this by subsequently injecting deionized water and flowback fluid at increasing flow rates into unsaturated sand columns containing colloids. Colloid retention and mobilization was measured in the column effluent and visualized in situ with bright field microscopy. While <5% of initial colloids were released by flushing with deionized water, 32–36% were released by flushing with flowback fluid in two distinct breakthrough peaks. These peaks resulted from 1) surface tension reduction and steric repulsion and 2) slow kinetic disaggregation of colloid flocs. Increasing the flow rate of the flowback fluid mobilized an additional 36% of colloids, due to the expansion of water filled pore space. This study suggests that hydrofracking fluid may also indirectly contaminate groundwater by remobilizing existing colloidal pollutants. PMID:24905470

  14. Effect of hydrofracking fluid on colloid transport in the unsaturated zone.

    PubMed

    Sang, Wenjing; Stoof, Cathelijne R; Zhang, Wei; Morales, Verónica L; Gao, Bin; Kay, Robert W; Liu, Lin; Zhang, Yalei; Steenhuis, Tammo S

    2014-07-15

    Hydraulic fracturing is expanding rapidly in the US to meet increasing energy demand and requires high volumes of hydrofracking fluid to displace natural gas from shale. Accidental spills and deliberate land application of hydrofracking fluids, which return to the surface during hydrofracking, are common causes of environmental contamination. Since the chemistry of hydrofracking fluids favors transport of colloids and mineral particles through rock cracks, it may also facilitate transport of in situ colloids and associated pollutants in unsaturated soils. We investigated this by subsequently injecting deionized water and flowback fluid at increasing flow rates into unsaturated sand columns containing colloids. Colloid retention and mobilization was measured in the column effluent and visualized in situ with bright field microscopy. While <5% of initial colloids were released by flushing with deionized water, 32-36% were released by flushing with flowback fluid in two distinct breakthrough peaks. These peaks resulted from 1) surface tension reduction and steric repulsion and 2) slow kinetic disaggregation of colloid flocs. Increasing the flow rate of the flowback fluid mobilized an additional 36% of colloids, due to the expansion of water filled pore space. This study suggests that hydrofracking fluid may also indirectly contaminate groundwater by remobilizing existing colloidal pollutants.

  15. Fluid Dynamics Prize Lecture: The Micromechanics of Colloidal Dispersions

    NASA Astrophysics Data System (ADS)

    Brady, John F.

    2012-11-01

    What do corn starch, swimming spermatozoa, DNA and self-assembling nanoparticles have in common? They are all (or can be modeled as) ``particles'' dispersed in a continuum suspending fluid where hydrodynamic interactions compete with thermal (Brownian) and interparticle forces to set structure and determine properties. These systems are ``soft'' as compared to molecular systems largely because their number density is much less and their time scales much longer than atomic or molecular systems. In this talk I will describe the common framework for modeling these diverse systems and the essential features that any hydrodynamic modeling must incorporate in order to capture the correct behavior. Actually computing the hydrodynamics in an accurate and efficient manner is the real challenge, and I will illustrate past successes and current efforts with examples drawn from the diffusion and rheology of colloids to the ``swimming'' of catalytic nanomotors.

  16. Light-activated self-propelled colloids

    PubMed Central

    Palacci, J.; Sacanna, S.; Kim, S.-H.; Yi, G.-R.; Pine, D. J.; Chaikin, P. M.

    2014-01-01

    Light-activated self-propelled colloids are synthesized and their active motion is studied using optical microscopy. We propose a versatile route using different photoactive materials, and demonstrate a multiwavelength activation and propulsion. Thanks to the photoelectrochemical properties of two semiconductor materials (α-Fe2O3 and TiO2), a light with an energy higher than the bandgap triggers the reaction of decomposition of hydrogen peroxide and produces a chemical cloud around the particle. It induces a phoretic attraction with neighbouring colloids as well as an osmotic self-propulsion of the particle on the substrate. We use these mechanisms to form colloidal cargos as well as self-propelled particles where the light-activated component is embedded into a dielectric sphere. The particles are self-propelled along a direction otherwise randomized by thermal fluctuations, and exhibit a persistent random walk. For sufficient surface density, the particles spontaneously form ‘living crystals’ which are mobile, break apart and reform. Steering the particle with an external magnetic field, we show that the formation of the dense phase results from the collisions heads-on of the particles. This effect is intrinsically non-equilibrium and a novel principle of organization for systems without detailed balance. Engineering families of particles self-propelled by different wavelength demonstrate a good understanding of both the physics and the chemistry behind the system and points to a general route for designing new families of self-propelled particles. PMID:25332383

  17. Dynamical density functional theory for molecular and colloidal fluids: a microscopic approach to fluid mechanics.

    PubMed

    Archer, A J

    2009-01-07

    In recent years, a number of dynamical density functional theories (DDFTs) have been developed for describing the dynamics of the one-body density of both colloidal and atomic fluids. In the colloidal case, the particles are assumed to have stochastic equations of motion and theories exist for both the case when the particle motion is overdamped and also in the regime where inertial effects are relevant. In this paper, we extend the theory and explore the connections between the microscopic DDFT and the equations of motion from continuum fluid mechanics. In particular, starting from the Kramers equation, which governs the dynamics of the phase space probability distribution function for the system, we show that one may obtain an approximate DDFT that is a generalization of the Euler equation. This DDFT is capable of describing the dynamics of the fluid density profile down to the scale of the individual particles. As with previous DDFTs, the dynamical equations require as input the Helmholtz free energy functional from equilibrium density functional theory (DFT). For an equilibrium system, the theory predicts the same fluid one-body density profile as one would obtain from DFT. Making further approximations, we show that the theory may be used to obtain the mode coupling theory that is widely used for describing the transition from a liquid to a glassy state.

  18. An active particle in a complex fluid

    NASA Astrophysics Data System (ADS)

    Datt, Charu; Natale, Giovanniantonio; Hatzikiriakos, Savvas G.; Elfring, Gwynn J.

    2016-11-01

    Active particles are self-driven units capable of converting stored or ambient free-energy into systematic movement. We discuss here the case when such particles move through non-Newtonian fluids. Neglecting inertial forces, we employ the reciprocal theorem to calculate the propulsion velocity of a single swimmer in a weakly non-Newtonian fluid with background flow. We also derive a general expression for the velocity of an active particle modelled as a squirmer in a second-order fluid. We then discuss how active colloids are affected by the medium rheology, namely viscoelasticity and shear-thinning.

  19. Colloid mobilization by fluid displacement fronts in channels.

    PubMed

    Lazouskaya, Volha; Wang, Lian-Ping; Or, Dani; Wang, Gang; Caplan, Jeffrey L; Jin, Yan

    2013-09-15

    Understanding colloid mobilization during transient flow in soil is important for addressing colloid and contaminant transport issues. While theoretical descriptions of colloid detachment exist for saturated systems, corresponding mechanisms of colloid mobilization during drainage and imbibition have not been considered in detail. In this work, theoretical force and torque analyses were performed to examine the interactive effects of adhesion, drag, friction, and surface tension forces on colloid mobilization and to outline conditions corresponding to the mobilization mechanisms such as lifting, sliding, and rolling. Colloid and substrate contact angles were used as variables to determine theoretical criteria for colloid mobilization mechanisms during drainage and imbibition. Experimental mobilization of hydrophilic and hydrophobic microspheres with drainage and imbibition fronts was investigated in hydrophilic and hydrophobic channels using a confocal microscope. Colloid mobilization differed between drainage and imbibition due to different dynamic contact angles and interfacial geometries on the contact line. Experimental results did not fully follow the theoretical criteria in all cases, which was explained with additional factors not included in the theory such as presence of aggregates and trailing films. Theoretical force and torque analyses resulted in similar mobilization predictions and suggested that all mobilization mechanisms contributed to the observed colloid mobilization.

  20. Self-diffusiophoresis of chemically active colloids

    NASA Astrophysics Data System (ADS)

    Popescu, Mihail N.; Uspal, William E.; Dietrich, Siegfried

    2016-11-01

    Chemically active colloids locally change the chemical composition of their solvent via catalytic reactions which occur on parts of their surface. They achieve motility by converting the released chemical free energy into mechanical work through various mechanisms, such as phoresis. Here we discuss the theoretical aspects of self-diffusiophoresis, which - despite being one of the simplest motility mechanisms - captures many of the general features characterizing self-phoresis, such as self-generated and maintained hydrodynamic flows "driven" by surface activity induced inhomogeneities in solution. By studying simple examples, which provide physical insight, we highlight the complex phenomenology which can emerge from self-diffusiophoresis.

  1. Active colloids that slosh through passive matrices

    NASA Astrophysics Data System (ADS)

    Zhang, Jie; Granick, Steve

    Studies of natural and artificial active matter have focused on systems with a large mismatch of the time and length scales for active and passive elements, but in a variety of non-equilibrium condensed matter systems, including numerous biological processes, actively driven elements have a crowded environment of surrounding passive ``solvent'' elements of comparable size. Here we study self-propelled colloidal particles in a passive matrix of comparable size. Particles with high activity take straight lines and sharp turns through the soft 2-D crystal matrix to ensure rapid healing of the crystal structure. Effective attraction between active particles arises when the concentration of active particles or the hardness of the matrix increases; active particles tend to segregate in the grain boundaries of the crystal matrix.

  2. Universal Features of the Fluid to Solid Transition for Attractive Colloidal Particles

    NASA Technical Reports Server (NTRS)

    Cipelletti, L.; Prasad, V.; Dinsmore, A.; Segre, P. N.; Weitz, D. A.; Trappe, V.

    2002-01-01

    Attractive colloidal particles can exhibit a fluid to solid phase transition if the magnitude of the attractive interaction is sufficiently large, if the volume fraction is sufficiently high, and if the applied stress is sufficiently small. The nature of this fluid to solid transition is similar for many different colloid systems, and for many different forms of interaction. The jamming phase transition captures the common features of these fluid to solid translations, by unifying the behavior as a function of the particle volume fraction, the energy of interparticle attractions, and the applied stress. This paper describes the applicability of the jamming state diagram, and highlights those regions where the fluid to solid transition is still poorly understood. It also presents new data for gelation of colloidal particles with an attractive depletion interaction, providing more insight into the origin of the fluid to solid transition.

  3. Assembly of colloidal strings in a simple fluid flow

    NASA Astrophysics Data System (ADS)

    Abe, Yu; Francis, Lorraine; Cheng, Xiang

    Colloidal particles self-assemble into ordered structures ranging from face- and body-centered cubic crystals to binary ionic crystals and to kagome lattices. Such diverse micron-scale structures are of practical importance for creating photonic materials and also of fundamental interest for probing equilibrium and non-equilibrium statistical mechanics. As a particularly interesting example, 1D colloidal strings provide a unique system for investigating non-equilibrium dynamics of crystal lattices. Here, we report a simple experimental method for constructing 1D colloidal crystals, where colloidal particles self-assemble into flow-aligned string structures near solid boundary under unidirectional flows. Using fast confocal microscopy, we explore the degree of particle alignment as functions of flow rate, particle concentrations, wetting properties of solid boundary and ionic strength of solvent. Through our systematic experiments, we show that these colloidal strings arise from hydrodynamic coupling, facilitated by electrostatic attractions between particles and the boundary. Compared with previous methods, our work provides a much simpler experimental procedure for assembling a large number of colloidal strings.

  4. [Bactericidal activity of colloidal silver against grampositive and gramnegative bacteria].

    PubMed

    Afonina, I A; Kraeva, L A; Tseneva, G Ia

    2010-01-01

    It was shown that colloidal silver solution prepared in cooperation with the A. F. Ioffe Physical Technical Institute of the Russian Academy of Sciences, had significant bactericidal activity. Stable bactericidal effect on gramnegative microorganisms was observed after their 2-hour exposition in the solution of colloidal silver at a concentration of 10 ppm. Grampositive capsule-forming microorganisms were less susceptible to the colloidal silver solution: their death was observed after the 4-hour exposition in the solution.

  5. Dynamics and Emergent Structures in Active Fluids

    NASA Astrophysics Data System (ADS)

    Baskaran, Aparna

    2014-03-01

    In this talk, we consider an active fluid of colloidal sized particles, with the primary manifestation of activity being a self-replenishing velocity along one body axis of the particle. This is a minimal model for varied systems such as bacterial colonies, cytoskeletal filament motility assays vibrated granular particles and self propelled diffusophoretic colloids, depending on the nature of interaction among the particles. Using microscopic Brownian dynamics simulations, coarse-graining using the tools of non-equilibrium statistical mechanics and analysis of macroscopic hydrodynamic theories, we characterize emergent structures seen in these systems, which are determined by the symmetry of the interactions among the active units, such as propagating density waves, dense stationary bands, asters and phase separated isotropic clusters. We identify a universal mechanism, termed ``self-regulation,'' as the underlying physics that leads to these structures in diverse systems. Support from NSF through DMR-1149266 and DMR-0820492.

  6. Universal Hydrodynamic Mechanisms for Crystallization in Active Colloidal Suspensions

    NASA Astrophysics Data System (ADS)

    Singh, Rajesh; Adhikari, R.

    2016-11-01

    The lack of detailed balance in active colloidal suspensions allows dissipation to determine stationary states. Here we show that slow viscous flow produced by polar or apolar active colloids near plane walls mediates attractive hydrodynamic forces that drive crystallization. Hydrodynamically mediated torques tend to destabilize the crystal but stability can be regained through critical amounts of bottom heaviness or chiral activity. Numerical simulations show that crystallization is not nucleational, as in equilibrium, but is preceded by a spinodal-like instability. Harmonic excitations of the active crystal relax diffusively but the normal modes are distinct from an equilibrium colloidal crystal. The hydrodynamic mechanisms presented here are universal and rationalize recent experiments on the crystallization of active colloids.

  7. Flow-induced aggregation of colloidal particles in viscoelastic fluids

    NASA Astrophysics Data System (ADS)

    Xie, Donglin; Qiao, Greg G.; Dunstan, Dave E.

    2016-08-01

    The flow-induced aggregation of dilute colloidal polystyrene nanoparticles suspended in Newtonian and viscoelastic solutions is reported. A rheo-optical method has been used to detect real-time aggregation processes via measuring optical absorption or scattering in a quartz Couette cell. The observed absorbance decreases over time are attributed to the flow-induced coagulation. Numerical simulations show that the aggregation processes still follow the Smoluchowski coagulation equation in a revised version. Suspensions in a series of media are studied to evaluate the effect of the media rheological properties on the particle aggregation. The data shows that elasticity reduces the aggregation while the solution viscosity enhances the aggregation processes.

  8. Active colloids in the context of chemical kinetics

    NASA Astrophysics Data System (ADS)

    Oshanin, G.; Popescu, M. N.; Dietrich, S.

    2017-03-01

    We study a mesoscopic model of a chemically active colloidal particle which on certain parts of its surface promotes chemical reactions in the surrounding solution. For reasons of simplicity and conceptual clarity, we focus on the case in which only electrically neutral species are present in the solution and on chemical reactions which are described by first order kinetics. Within a self-consistent approach we explicitly determine the steady state product and reactant number density fields around the colloid as functionals of the interaction potentials of the various molecular species in solution with the colloid. By using a reciprocal theorem, this allows us to compute and to interpret—in a transparent way in terms of the classical Smoluchowski theory of chemical kinetics—the external force needed to keep such a catalytically active colloid at rest (stall force) or, equivalently, the corresponding velocity of the colloid if it is free to move. We use the particular case of triangular-well interaction potentials as a benchmark example for applying the general theoretical framework developed here. For this latter case, we derive explicit expressions for the dependences of the quantities of interest on the diffusion coefficients of the chemical species, the reaction rate constant, the coverage by catalyst, the size of the colloid, as well as on the parameters of the interaction potentials. These expressions provide a detailed picture of the phenomenology associated with catalytically-active colloids and self-diffusiophoresis.

  9. Temporal evolution of pore geometry, fluid flow, and solute transport resulting from colloid deposition

    SciTech Connect

    Chen, Cheng; Lau, Boris L.; Gaillard, J.-F.; Packman, A.I.

    2010-01-22

    Deposition of colloidal particles is one of many processes that lead to the evolution of the structure of natural porous media in groundwater aquifers, oil reservoirs, and sediment beds. Understanding of the mechanisms and effects of this type of structural evolution has been limited by a lack of direct observations of pore structure. Here, synchrotron X-ray difference microtomography (XDMT) was used to resolve the temporal evolution of pore structure and the distribution of colloidal deposits within a granular porous medium. Column filtration experiments were performed to observe the deposition of relatively high concentrations of colloidal zirconia (200 mg/l of particles having diameter {approx}1 {micro}m) in a packed bed of glass beads (diameters 210-300 {micro}m). Noninvasive XDMT imaging of the pore structure was performed three separate times during each column experiment. The structural information observed at each time was used to define internal boundary conditions for three-dimensional lattice Boltzmann (LB) simulations that show how the evolving pore structure affects pore fluid flow and solute transport. While the total deposit mass increased continuously over time, colloid deposition was observed to be highly heterogeneous and local colloid detachment was observed at some locations in a low ionic strength medium. LB simulations indicated that particle accumulation greatly reduced the permeability of the porous medium while increasing the tortuosity. The colloidal deposits also increased the spatial variability in pore water velocities, leading to higher dispersion coefficients. Anomalous dispersion behavior was investigated by simulation at the scale of the experimental system: weak tailing was found in the clean bed case, and the extent of tailing greatly increased following colloid deposition because of the development of extensive no-flow regions. As a result of this coupling between pore fluid flow, colloid accumulation, and the pore geometry

  10. Self-assembly of active colloidal molecules with dynamic function

    NASA Astrophysics Data System (ADS)

    Soto, Rodrigo; Golestanian, Ramin

    Catalytically active colloids maintain non-equilibrium conditions in which they produce and deplete chemicals at their surface. While individual colloids that are symmetrically coated do not exhibit dynamical activity, the concentration fields resulting from their chemical activity decay as 1/r and produce gradients that attract or repel other colloids depending on their surface chemistry and ambient variables. This results in a non-equilibrium analogue of ionic systems, but with the remarkable novel feature of action-reaction symmetry breaking. In dilute conditions these active colloids join up to form molecules via generalized ionic bonds. Colloids are found to join up to form self-assembled molecules that could be inert or have spontaneous activity in the form of net translational velocity and spin depending on their symmetry properties and their constituents. As the interactions do not satisfy detailed-balance, it is possible to achieve structures with time dependent functionality. We study a molecule that adopts spontaneous oscillations and another that exhibits a run-and-tumble dynamics similar to bacteria. Our study shows that catalytically active colloids could be used for designing self-assembled structures that posses dynamical functionalities.

  11. Dynamic broadening of the crystal-fluid interface of colloidal hard spheres.

    PubMed

    Dullens, Roel P A; Aarts, Dirk G A L; Kegel, Willem K

    2006-12-01

    We investigate the structure and dynamics of the crystal-fluid interface of colloidal hard spheres in real space by confocal microscopy. Tuning the buoyancy of the particles allows us to study the interface close to and away from equilibrium. We find that the interface broadens from 8-9 particle diameters close to equilibrium to 15 particle diameters away from equilibrium. Furthermore, the interfacial velocity, i.e., the velocity by which the interface moves upwards, increases significantly. The increasing gravitational drive leads to supersaturation of the fluid above the crystal surface. This dramatically affects crystal nucleation and growth, resulting in the observed dynamic broadening of the crystal-fluid interface.

  12. Key Controversies in Colloid and Crystalloid Fluid Utilization

    PubMed Central

    Leedahl, David D.; Kashani, Kianoush B.

    2015-01-01

    Nearly 2 centuries have passed since the use of intravenous fluid became a foundational component of clinical practice. Despite a steady stream of published investigations on the topic, questions surrounding the choice, dose, timing, targets, and cost-effectiveness of various fluid options remain insufficiently answered. In recent years, 2 of the most debated topics reference the role of albumin in acute care and the safety of normal saline. Although albumin has a place in therapy for specific patient populations, its high cost relative to other fluids makes it a less desirable option for hospitals and health systems with escalating formulary scrutiny. Pharmacists bear responsibility for reconciling this disparity and supporting the rational use of albumin in acute care through a careful evaluation of recently published literature. In parallel, it has become clear that crystalloids should no longer be considered a homogenous class of fluids. The past reliance on normal saline has been questioned due to recent findings of renal dysfunction attributable to the solution’s supraphysiologic chloride concentration. These safety concerns with 0.9% sodium chloride may result in a practice shift toward more routine use of “balanced crystalloids,” such as lactated Ringer’s or Plasma-Lyte, that mimic the composition of extracellular fluid. The purpose of this review is to summarize the evidence regarding these 2 important fluid controversies that are likely to affect hospital pharmacists in the coming decades — the evidence-based use of human albumin and the rising role of balanced salt solutions in clinical practice. PMID:26405334

  13. Cosmology in a petri dish? Simulation of collective of colloids at fluid interfaces

    NASA Astrophysics Data System (ADS)

    Bleibel, J.

    2014-04-01

    Interfacially trapped, micrometer-sized colloidal particles interact via ranged capillary attraction which is analogous to two-dimensional screened Newtonian gravity with the capillary length λ as the tuneable screening length. Using Brownian namics simulations and density functional theory, we study the dynamics of an initially prepared distribution of colloids, either a random homogeneous distribution, or a finitely- sized patch of colloids. Whereas the limit λ → ∞ corresponds to the global collapse self-gravitating fluid, for smaller λ the dynamics crosses over to spinodal decomposition showing a coarsening of regions of enhanced density which emerge from initial fluctuations. For the finite patch of colloids and intermediate λ we predict theoretically and serve in simulations a ringlike density peak at the outer rim of the disclike patch, moving as an inbound shock wave. Experimental realizations of this crossover scenario appear be well possible for colloids trapped at water interfaces and having a radius of around micrometer. Finally, the influence of hydrodynamic interactions on this capillary collapse will be discussed briefly.

  14. Shape-sensitive crystallization in colloidal superball fluids

    PubMed Central

    Rossi, Laura; Soni, Vishal; Ashton, Douglas J.; Pine, David J.; Philipse, Albert P.; Chaikin, Paul M.; Dijkstra, Marjolein; Sacanna, Stefano; Irvine, William T. M.

    2015-01-01

    Guiding the self-assembly of materials by controlling the shape of the individual particle constituents is a powerful approach to material design. We show that colloidal silica superballs crystallize into canted phases in the presence of depletants. Some of these phases are consistent with the so-called “Λ1” lattice that was recently predicted as the densest packing of superdisks. As the size of the depletant is reduced, however, we observe a transition to a square phase. The differences in these entropically stabilized phases result from an interplay between the size of the depletants and the fine structure of the superball shape. We find qualitative agreement of our experimental results both with a phase diagram computed on the basis of the volume accessible to the depletants and with simulations. By using a mixture of depletants, one of which is thermosensitive, we induce solid-to-solid phase transitions between square and canted structures. The use of depletant size to leverage fine features of the shape of particles in driving their self-assembly demonstrates a general and powerful mechanism for engineering novel materials. PMID:25870301

  15. Nonequilibrium Equation of State in Suspensions of Active Colloids

    NASA Astrophysics Data System (ADS)

    Ginot, Félix; Theurkauff, Isaac; Levis, Demian; Ybert, Christophe; Bocquet, Lydéric; Berthier, Ludovic; Cottin-Bizonne, Cécile

    2015-01-01

    Active colloids constitute a novel class of materials composed of colloidal-scale particles locally converting chemical energy into motility, mimicking micro-organisms. Evolving far from equilibrium, these systems display structural organizations and dynamical properties distinct from thermalized colloidal assemblies. Harvesting the potential of this new class of systems requires the development of a conceptual framework to describe these intrinsically nonequilibrium systems. We use sedimentation experiments to probe the nonequilibrium equation of state of a bidimensional assembly of active Janus microspheres and conduct computer simulations of a model of self-propelled hard disks. Self-propulsion profoundly affects the equation of state, but these changes can be rationalized using equilibrium concepts. We show that active colloids behave, in the dilute limit, as an ideal gas with an activity-dependent effective temperature. At finite density, increasing the activity is similar to increasing adhesion between equilibrium particles. We quantify this effective adhesion and obtain a unique scaling law relating activity and effective adhesion in both experiments and simulations. Our results provide a new and efficient way to understand the emergence of novel phases of matter in active colloidal suspensions.

  16. Self-assembly of active colloidal molecules with dynamic function

    NASA Astrophysics Data System (ADS)

    Soto, Rodrigo; Golestanian, Ramin

    2015-05-01

    Catalytically active colloids maintain nonequilibrium conditions in which they produce and deplete chemicals and hence effectively act as sources and sinks of molecules. While individual colloids that are symmetrically coated do not exhibit any form of dynamical activity, the concentration fields resulting from their chemical activity decay as 1 /r and produce gradients that attract or repel other colloids depending on their surface chemistry and ambient variables. This results in a nonequilibrium analog of ionic systems, but with the remarkable novel feature of action-reaction symmetry breaking. We study solutions of such chemically active colloids in dilute conditions when they join up to form molecules via generalized ionic bonds and discuss how we can achieve structures with time-dependent functionality. In particular, we study a molecule that adopts a spontaneous oscillatory pattern of conformations and another that exhibits a run-and-tumble dynamics similar to bacteria. Our study shows that catalytically active colloids could be used for designing self-assembled structures that possess dynamical functionalities that are determined by their prescribed three-dimensional structures, a strategy that follows the design principle of proteins.

  17. Physics of Colloids in Space: Microgravity Experiment Launched, Installed, and Activated on the International Space Station

    NASA Technical Reports Server (NTRS)

    Doherty, Michael P.

    2002-01-01

    The Physics of Colloids in Space (PCS) experiment is a Microgravity Fluids Physics investigation that is presently located in an Expedite the Process of Experiments to Space Station (EXPRESS) Rack on the International Space Station. PCS was launched to the International Space Station on April 19, 2001, activated on May 31, 2001, and will continue to operate about 90 hr per week through May 2002.

  18. Colloidal complexed silver and silver nanoparticles in extrapallial fluid of Mytilus edulis.

    PubMed

    Zuykov, Michael; Pelletier, Emilien; Demers, Serge

    2011-02-01

    Metal transport in mollusk extrapallial fluid (EPF) that acts as a "bridge" between soft tissues and shell has surprisingly received little attention until now. Using ultrafiltration and radiotracer techniques we determined silver concentrations and speciation in the EPF of the blue mussel Mytilus edulis after short-term uptake and depuration laboratory experiments. Radiolabelled silver ((¹¹⁰m)Ag) was used in dissolved or nanoparticulate phases (AgNPs < 40 nm), with a similar low Ag concentration (total radioactive and cold Ag ~0.7 μg/L) in a way that mussels could uptake radiotracers only from seawater. Our results indicated that silver nanoparticles were transported to the EPF of blue mussels at a level similar to the Ag ionic form. Bulk activity of radiolabelled silver in the EPF represented only up to 7% of the bulk activity measured in the whole mussels. The EPF extracted from mussels exposed to both treatments exhibited an Ag colloidal complexed form based on EPF ultrafiltration through a 3 kDa filter. This original study brings new insights to internal circulation of nanoparticles in living organisms and contributes to the international effort in studying the potential impacts of engineered nanomaterials on marine bivalves which play an essential role in coastal ecosystems, and are important contributors to human food supply from the sea.

  19. Chemically active colloids near osmotic-responsive walls with surface-chemistry gradients

    NASA Astrophysics Data System (ADS)

    Popescu, M. N.; Uspal, W. E.; Dietrich, S.

    2017-04-01

    Chemically active colloids move by creating gradients in the composition of the surrounding solution and by exploiting the differences in their interactions with the various molecular species in solution. If such particles move near boundaries, e.g. the walls of the container confining the suspension, gradients in the composition of the solution are also created along the wall. This give rise to chemi-osmosis (via the interactions of the wall with the molecular species forming the solution), which drives flows coupling back to the colloid and thus influences its motility. Employing an approximate ‘point-particle’ analysis, we show analytically that—owing to this kind of induced active response (chemi-osmosis) of the wall—such chemically active colloids can align with, and follow, gradients in the surface chemistry of the wall. In this sense, these artificial ‘swimmers’ exhibit a primitive form of thigmotaxis with the meaning of sensing the proximity of a (not necessarily discontinuous) physical change in the environment. We show that the alignment with the surface-chemistry gradient is generic for chemically active colloids as long as they exhibit motility in an unbounded fluid, i.e. this phenomenon does not depend on the exact details of the propulsion mechanism. The results are discussed in the context of simple models of chemical activity, corresponding to Janus particles with ‘source’ chemical reactions on one half of the surface and either ‘inert’ or ‘sink’ reactions over the other half.

  20. Gold enrichment in active geothermal systems by accumulating colloidal suspensions

    NASA Astrophysics Data System (ADS)

    Hannington, Mark; Harðardóttir, Vigdis; Garbe-Schönberg, Dieter; Brown, Kevin L.

    2016-04-01

    The origins of high-grade hydrothermal ore deposits are debated, but active geothermal systems provide important clues to their formation. The highest concentrations of gold are found in geothermal systems with direct links to island arc magmatism. Yet, similar concentrations have also been found in the absence of any input from arc magmas, for example, in the Reykjanes geothermal field, Iceland. Here we analyse brine samples taken from deep wells at Reykjanes and find that gold concentrations in the reservoir zone have increased over the past seven years from an average of 3 ppb to 14 ppb. The metal concentrations greatly exceed the maximum solubility of gold in the reservoir under saturated conditions and are now nearly two orders of magnitude higher than in mid-ocean ridge black smoker fluids--the direct analogues of Reykjanes deep liquids. We suggest that ongoing extraction of brine, the resulting pressure drop, and increased boiling have caused gold to drop out of solution and become trapped in the reservoir as a colloidal suspension. This process may explain how the stock of metal in the reservoirs of fossil geothermal systems could have increased over time and thus become available for the formation of gold-rich ore deposits.

  1. Chains, Rings, and Dendrites of Active Colloidal Polymers

    NASA Astrophysics Data System (ADS)

    Zhang, Jie; Granick, Steve

    2015-03-01

    In order to better understand active polymeric matter, colloidal polymers are imaged, in situ in real time, obtaining not only temporal and spatial information about each ``monomer'' in these living polymers but also about the time-dependent and orientation-dependent correlations between them. Our reversible colloidal polymer system is assembled from self-propelled monomeric Janus particles with dynamic ``plug and play'' self-assembly and programmed direction-specific interactions between the particles. Enabling this, AC voltage induces dipoles on the monomeric Janus particles that link them into chains while also generating active phoretic motility. Unique features of this system relative to conventional Brownian polymers are emphasized.

  2. Flow of colloidal solids and fluids through constrictions: dynamical density functional theory versus simulation

    NASA Astrophysics Data System (ADS)

    Zimmermann, Urs; Smallenburg, Frank; Löwen, Hartmut

    2016-06-01

    Using both dynamical density functional theory and particle-resolved Brownian dynamics simulations, we explore the flow of two-dimensional colloidal solids and fluids driven through a linear channel with a constriction. The flow is generated by a constant external force acting on all colloids. The initial configuration is equilibrated in the absence of flow and then the external force is switched on instantaneously. Upon starting the flow, we observe four different scenarios: a complete blockade, a monotonic decay to a constant particle flux (typical for a fluid), a damped oscillatory behaviour in the particle flux, and a long-lived stop-and-go behaviour in the flow (typical for a solid). The dynamical density functional theory describes all four situations but predicts infinitely long undamped oscillations in the flow which are always damped in the simulations. We attribute the mechanisms of the underlying stop-and-go flow to symmetry conditions on the flowing solid. Our predictions are verifiable in real-space experiments on magnetic colloidal monolayers which are driven through structured microchannels and can be exploited to steer the flow throughput in microfluidics.

  3. Pattern matching based active optical sorting of colloids/cells

    NASA Astrophysics Data System (ADS)

    Verma, R. S.; Dasgupta, R.; Ahlawat, S.; Kumar, N.; Uppal, A.; Gupta, P. K.

    2013-08-01

    We report active optical sorting of colloids/cells by employing a cross correlation based pattern matching technique for selection of the desired objects and thereafter sorting using dynamically controllable holographic optical traps. The problem of possible collision between the different sets of objects during sorting was avoided by raising one set of particles to a different plane. We also present the results obtained on using this approach for some representative applications such as sorting of silica particles of two different sizes, of closely packed colloids and of white blood cells and red blood cells from a mixture of the two.

  4. Interactions and Collective Behaviour of Chemotactic Active Colloids

    NASA Astrophysics Data System (ADS)

    Saha, Suropriya; Hablani, Surbhi; Golestanian, Ramin; Ramaswamy, Sriram

    2015-03-01

    Artificial realizations of motility point in the direction of a new paradigm in engineering, through the design of emergent behavior by manipulating properties at the scale of the individual components. Catalytic colloidal swimmers are a particularly promising example of such systems. Here we present a comprehensive theoretical description of gradient-sensing of an individual swimmer, leading controllably to chemotactic or anti-chemotactic behavior. We use it to study the scattering of such a swimmer off a reactant source and construct a framework for studying their two body interactions and finally their collective behavior. We find that both the positional and the orientational degrees of freedom of the active colloids can exhibit condensation, signalling formation of clusters and asters. We present prescriptions for how to tune the surface properties of the colloids during fabrication to achieve each type of behavior. We further study the athermal fluctuations of a pointed tracer particle in a bath of such swimmers.

  5. Localization and dynamical arrest of colloidal fluids in a disordered matrix of polydisperse obstacles

    NASA Astrophysics Data System (ADS)

    Elizondo-Aguilera, Luis Fernando; Medina-Noyola, Magdaleno

    2015-06-01

    The mobility of a colloidal particle in a crowded and confined environment may be severely reduced by its interactions with other mobile colloidal particles and the fixed obstacles through which it diffuses. The latter may be modelled as an array of obstacles with random fixed positions. In this contribution, we report on the effects of the size-polydispersity of such fixed obstacles on the immobilization and dynamical arrest of the diffusing colloidal particles. This complex system is modelled as a monodisperse Brownian hard-sphere fluid diffusing through a polydisperse matrix of fixed hard spheres with a given size distribution. In the Lorentz gas limit (absence of interactions between the mobile particles), we first develop a simple excluded-volume theory to describe the localization transition of the tracer mobile particles. To take into account the interactions among the mobile particles, we adapt the multi-component self-consistent generalized Langevin equation (SCGLE) theory of colloid dynamics, which also allows us to calculate the dynamical arrest transition line, and in general, all the dynamical properties of the mobile particles (mean-squared displacement, self-diffusion coefficient, etc.). The scenarios described by both approaches in the Lorentz gas limit are qualitatively consistent, but the SCGLE formalism describes the dependence of the dynamics of the adsorbed fluid on the polydispersity of the porous matrix at arbitrary concentrations of the mobile spheres and arbitrary volume fractions of the obstacles. Two mechanisms for dynamical arrest (glass transition and localization) are analyzed and we also discuss the crossover between them using the SCGLEs.

  6. Localization and dynamical arrest of colloidal fluids in a disordered matrix of polydisperse obstacles.

    PubMed

    Elizondo-Aguilera, Luis Fernando; Medina-Noyola, Magdaleno

    2015-06-14

    The mobility of a colloidal particle in a crowded and confined environment may be severely reduced by its interactions with other mobile colloidal particles and the fixed obstacles through which it diffuses. The latter may be modelled as an array of obstacles with random fixed positions. In this contribution, we report on the effects of the size-polydispersity of such fixed obstacles on the immobilization and dynamical arrest of the diffusing colloidal particles. This complex system is modelled as a monodisperse Brownian hard-sphere fluid diffusing through a polydisperse matrix of fixed hard spheres with a given size distribution. In the Lorentz gas limit (absence of interactions between the mobile particles), we first develop a simple excluded-volume theory to describe the localization transition of the tracer mobile particles. To take into account the interactions among the mobile particles, we adapt the multi-component self-consistent generalized Langevin equation (SCGLE) theory of colloid dynamics, which also allows us to calculate the dynamical arrest transition line, and in general, all the dynamical properties of the mobile particles (mean-squared displacement, self-diffusion coefficient, etc.). The scenarios described by both approaches in the Lorentz gas limit are qualitatively consistent, but the SCGLE formalism describes the dependence of the dynamics of the adsorbed fluid on the polydispersity of the porous matrix at arbitrary concentrations of the mobile spheres and arbitrary volume fractions of the obstacles. Two mechanisms for dynamical arrest (glass transition and localization) are analyzed and we also discuss the crossover between them using the SCGLEs.

  7. Colloidal binary mixtures at fluid-fluid interfaces under steady shear: structural, dynamical and mechanical response†

    PubMed Central

    Zell, Zachary A.; Squires, Todd M.; Isa, Lucio

    2015-01-01

    We experimentally study the link between structure, dynamics and mechanical response of two-dimensional (2D) binary mixtures of colloidal microparticles spread at water/oil interfaces. The particles are driven into steady shear by a microdisk forced to rotate at a controlled angular velocity. The flow causes particles to layer into alternating concentric rings of small and big colloids. The formation of such layers is linked to the local, position-dependent shear rate, which triggers two distinct dynamical regimes: particles either move continuously (“Flowing”) close to the microdisk, or exhibit intermittent “Hopping” between local energy minima farther away. The shear-rate-dependent surface viscosity of the monolayers can be extracted from a local interfacial stress balance, giving “macroscopic” flow curves whose behavior corresponds to the distinct microscopic regimes of particle motion. Hopping Regions reveal a higher resistance to flow compared to the Flowing Regions, where spatial organization into layers reduces dissipation. PMID:26347409

  8. Phase Behavior and Percolation Properties of the Patchy Colloidal Fluids in the Random Porous Media.

    PubMed

    Kalyuzhnyi, Y V; Holovko, M; Patsahan, T; Cummings, P T

    2014-12-18

    The lack of a simple analytical description of the hard-sphere fluid in a matrix with hard-core obstacles is limiting progress in the development of thermodynamic perturbation theories for the fluid in random porous media. We propose a simple and highly accurate analytical scheme, which allows us to calculate thermodynamic and percolation properties of a network-forming fluid confined in the random porous media, represented by the hard-sphere fluid and overlapping hard-sphere matrices, respectively. Our scheme is based on the combination of scaled-particle theory, Wertheim's thermodynamic perturbation theory for associating fluids and extension of the Flory-Stockmayer theory for percolation. The liquid-gas phase diagram and percolation threshold line for several versions of the patchy colloidal fluid model confined in a random porous media are calculated and discussed. The method presented enables calculation of the thermodynamic and percolation properties of a large variety of polymerizing and network-forming fluids confined in random porous media.

  9. Inverse patchy colloids with small patches: fluid structure and dynamical slowing down

    NASA Astrophysics Data System (ADS)

    Ferrari, Silvano; Bianchi, Emanuela; Kalyuzhnyi, Yura V.; Kahl, Gerhard

    2015-06-01

    Inverse patchy colloids (IPCs) differ from conventional patchy particles because their patches repel (rather than attract) each other and attract (rather than repel) the part of the colloidal surface that is free of patches. These particular features occur, e.g. in heterogeneously charged colloidal systems. Here we consider overall neutral IPCs carrying two, relatively small, polar patches. Previous studies of the same model under planar confinement have evidenced the formation of branched, disordered aggregates composed of ring-like structures. We investigate here the bulk behavior of the system via molecular dynamics simulations, focusing on both the structure and the dynamics of the fluid phase in a wide region of the phase diagram. Additionally, the simulation results for the static observables are compared to the Associative Percus Yevick solution of an integral equation approach based on the multi-density Ornstein-Zernike theory. A good agreement between theoretical and numerical quantities is observed even in the region of the phase diagram where the slowing down of the dynamics occurs.

  10. Single crystal growth and anisotropic crystal-fluid interfacial free energy in soft colloidal systems.

    PubMed

    Nguyen, Van Duc; Hu, Zhibing; Schall, Peter

    2011-07-01

    We measure the anisotropy of the crystal-fluid interfacial free energy in soft colloidal systems. A temperature gradient is used to direct crystal nucleation and control the growth of large single crystals in order to achieve well-equilibrated crystal-fluid interfaces. Confocal microscopy is used to follow both the growth process and the equilibrium crystal-fluid interface at the particle scale: heterogeneous crystal nucleation, the advancing interface, and the stationary equilibrium interface. We use the measured growth velocity to determine the chemical potential difference between crystal and fluid phases. Well-equilibrated, large crystal-fluid interfaces are then used to determine the interfacial free energy and its anisotropy directly from thermally excited interface fluctuations. We find that while the measured average interfacial free energy is in good agreement with values found in simulations, the anisotropy is significantly larger than simulation values. Finally, we investigate the effect of impurities on the advancing interface. We determine the critical force needed to overcome impurity particles from the local interface curvature.

  11. Temperature (de)activated patchy colloidal particles.

    PubMed

    de Las Heras, Daniel; da Gama, Margarida M Telo

    2016-06-22

    We present a new model of patchy particles in which the interaction sites can be activated or deactivated by varying the temperature of the system. We study the thermodynamics of the system by means of Wertheim's first order perturbation theory, and use Flory-Stockmayer theory of polymerization to analyse the percolation threshold. We find a very rich phase behaviour including lower critical points and reentrant percolation.

  12. Theoretical and numerical investigations of inverse patchy colloids in the fluid phase

    SciTech Connect

    Kalyuzhnyi, Yurij V.; Bianchi, Emanuela Ferrari, Silvano; Kahl, Gerhard

    2015-03-21

    We investigate the structural and thermodynamic properties of a new class of patchy colloids, referred to as inverse patchy colloids (IPCs) in their fluid phase via both theoretical methods and simulations. IPCs are nano- or micro- meter sized particles with differently charged surface regions. We extend conventional integral equation schemes to this particular class of systems: our approach is based on the so-called multi-density Ornstein-Zernike equation, supplemented with the associative Percus-Yevick approximation (APY). To validate the accuracy of our framework, we compare the obtained results with data extracted from NpT and NVT Monte Carlo simulations. In addition, other theoretical approaches are used to calculate the properties of the system: the reference hypernetted-chain (RHNC) method and the Barker-Henderson thermodynamic perturbation theory. Both APY and RHNC frameworks provide accurate predictions for the pair distribution functions: APY results are in slightly better agreement with MC data, in particular at lower temperatures where the RHNC solution does not converge.

  13. Biorelevant media simulating fed state intestinal fluids: colloid phase characterization and impact on solubilization capacity.

    PubMed

    Kleberg, Karen; Jacobsen, Freja; Fatouros, Dimitris G; Müllertz, Anette

    2010-08-01

    The purpose of the present study was to study the impact of free fatty acid and monoglyceride level and ratio on the nanostructural composition and solubilizing capacity of media simulating fed state intestinal fluids (SIFs). SIFs, without or with oleic acid/monoolein (OA/MO) in ratios of 2:1 or 6:1 were composed and characterized by surface tension, dynamic light scattering, and cryogenic transmission electron microscopy. Additionally solubilizing capacities towards three poorly water-soluble compounds: danazol, fenofibrate, and cinnarizine, were assessed. The surface tension of the media was not affected by the OA/MO ratio but only determined by the total surfactant concentration. The media with no lipolysis products only contained micelles, whereas media with lipolysis products also contained vesicles and other colloidal structures. The structures in the 6:1 media were more numerous and more well-defined regarding shape and size. The nanostructural composition of the media did influence the solubilizing capacity toward fenofibrate and cinnarizine, but not toward danazol. The relative composition of SIFs is important for the solubilizing capacity of some drug compounds. The findings in this study suggest that the affinity of the drug to the different colloidal structures is determining for the solubility of the compound in the media.

  14. Theoretical and numerical investigations of inverse patchy colloids in the fluid phase

    NASA Astrophysics Data System (ADS)

    Kalyuzhnyi, Yurij V.; Bianchi, Emanuela; Ferrari, Silvano; Kahl, Gerhard

    2015-03-01

    We investigate the structural and thermodynamic properties of a new class of patchy colloids, referred to as inverse patchy colloids (IPCs) in their fluid phase via both theoretical methods and simulations. IPCs are nano- or micro- meter sized particles with differently charged surface regions. We extend conventional integral equation schemes to this particular class of systems: our approach is based on the so-called multi-density Ornstein-Zernike equation, supplemented with the associative Percus-Yevick approximation (APY). To validate the accuracy of our framework, we compare the obtained results with data extracted from NpT and NVT Monte Carlo simulations. In addition, other theoretical approaches are used to calculate the properties of the system: the reference hypernetted-chain (RHNC) method and the Barker-Henderson thermodynamic perturbation theory. Both APY and RHNC frameworks provide accurate predictions for the pair distribution functions: APY results are in slightly better agreement with MC data, in particular at lower temperatures where the RHNC solution does not converge.

  15. Dynamical density functional theory for arbitrary-shape colloidal fluids including inertia and hydrodynamic interactions

    NASA Astrophysics Data System (ADS)

    Duran-Olivencia, Miguel A.; Goddard, Ben; Kalliadasis, Serafim

    2015-11-01

    Over the last few decades the classical density-functional theory (DFT) and its dynamic extensions (DDFTs) have become a remarkably powerful tool in the study of colloidal fluids. Recently there has been extensive research to generalise all previous DDFTs finally yielding a general DDFT equation (for spherical particles) which takes into account both inertia and hydrodynamic interactions (HI) which strongly influence non-equilibrium properties. The present work will be devoted to a further generalisation of such a framework to systems of anisotropic particles. To this end, the kinetic equation for the Brownian particle distribution function is derived starting from the Liouville equation and making use of Zwanzig's projection-operator techniques. By averaging over all but one particle, a DDFT equation is finally obtained with some similarities to that for spherical colloids. However, there is now an inevitable translational-rotational coupling which affects the diffusivity of asymmetric particles. Lastly, in the overdamped (high friction) limit the theory is notably simplified leading to a DDFT equation which agrees with previous derivations. We acknowledge financial support from European Research Council via Advanced Grant No. 247031.

  16. Second virial coefficient at the critical point in a fluid of colloidal spheres plus depletants.

    PubMed

    Tuinier, Remco; Feenstra, Maartje S

    2014-11-11

    Vliegenthart-Lekkerkerker (VL) criterion B2 = -6vc for second virial coefficient B2 at the critical (colloidal) gas-liquid point is considered for a mixture of spheres with volume vc plus depletants. For the onset of fluid-phase instability, the VL criterion holds for a wide range of shapes of direct attractive forces between hard-core spheres (Vliegenthart, G. A.; Lekkerkerker, H. N. W. J. Chem. Phys. 2000, 112, 5364). In the case of long-ranged attractions imposed indirectly via depletants, it is found that the VL relation fails. Instead, B2/vc at the critical point depends strongly on the sphere/depletant size ratio. By making the hard spheres sticky, we find that B2 moves gradually toward the VL criterion upon increasing the stickiness.

  17. Brownian aggregation rate of colloid particles with several active sites

    SciTech Connect

    Nekrasov, Vyacheslav M.; Yurkin, Maxim A.; Chernyshev, Andrei V.; Polshchitsin, Alexey A.; Yakovleva, Galina E.; Maltsev, Valeri P.

    2014-08-14

    We theoretically analyze the aggregation kinetics of colloid particles with several active sites. Such particles (so-called “patchy particles”) are well known as chemically anisotropic reactants, but the corresponding rate constant of their aggregation has not yet been established in a convenient analytical form. Using kinematic approximation for the diffusion problem, we derived an analytical formula for the diffusion-controlled reaction rate constant between two colloid particles (or clusters) with several small active sites under the following assumptions: the relative translational motion is Brownian diffusion, and the isotropic stochastic reorientation of each particle is Markovian and arbitrarily correlated. This formula was shown to produce accurate results in comparison with more sophisticated approaches. Also, to account for the case of a low number of active sites per particle we used Monte Carlo stochastic algorithm based on Gillespie method. Simulations showed that such discrete model is required when this number is less than 10. Finally, we applied the developed approach to the simulation of immunoagglutination, assuming that the formed clusters have fractal structure.

  18. Dynamic heterogeneities and non-Gaussian behavior in two-dimensional randomly confined colloidal fluids

    NASA Astrophysics Data System (ADS)

    Schnyder, Simon K.; Skinner, Thomas O. E.; Thorneywork, Alice L.; Aarts, Dirk G. A. L.; Horbach, Jürgen; Dullens, Roel P. A.

    2017-03-01

    A binary mixture of superparamagnetic colloidal particles is confined between glass plates such that the large particles become fixed and provide a two-dimensional disordered matrix for the still mobile small particles, which form a fluid. By varying fluid and matrix area fractions and tuning the interactions between the superparamagnetic particles via an external magnetic field, different regions of the state diagram are explored. The mobile particles exhibit delocalized dynamics at small matrix area fractions and localized motion at high matrix area fractions, and the localization transition is rounded by the soft interactions [T. O. E. Skinner et al., Phys. Rev. Lett. 111, 128301 (2013), 10.1103/PhysRevLett.111.128301]. Expanding on previous work, we find the dynamics of the tracers to be strongly heterogeneous and show that molecular dynamics simulations of an ideal gas confined in a fixed matrix exhibit similar behavior. The simulations show how these soft interactions make the dynamics more heterogeneous compared to the disordered Lorentz gas and lead to strong non-Gaussian fluctuations.

  19. Redox Active Colloids as Discrete Energy Storage Carriers.

    PubMed

    Montoto, Elena C; Nagarjuna, Gavvalapalli; Hui, Jingshu; Burgess, Mark; Sekerak, Nina M; Hernández-Burgos, Kenneth; Wei, Teng-Sing; Kneer, Marissa; Grolman, Joshua; Cheng, Kevin J; Lewis, Jennifer A; Moore, Jeffrey S; Rodríguez-López, Joaquín

    2016-10-12

    Versatile and readily available battery materials compatible with a range of electrode configurations and cell designs are desirable for renewable energy storage. Here we report a promising class of materials based on redox active colloids (RACs) that are inherently modular in their design and overcome challenges faced by small-molecule organic materials for battery applications, such as crossover and chemical/morphological stability. RACs are cross-linked polymer spheres, synthesized with uniform diameters between 80 and 800 nm, and exhibit reversible redox activity as single particles, as monolayer films, and in the form of flowable dispersions. Viologen-based RACs display reversible cycling, accessing up to 99% of their capacity and 99 ± 1% Coulombic efficiency over 50 cycles by bulk electrolysis owing to efficient, long-distance intraparticle charge transfer. Ferrocene-based RACs paired with viologen-based RACs cycled efficiently in a nonaqueous redox flow battery employing a simple size-selective separator, thus demonstrating a possible application that benefits from their colloidal dimensions. The unprecedented versatility in RAC synthetic and electrochemical design opens new avenues for energy storage.

  20. Active structuring of colloidal armour on liquid drops

    PubMed Central

    Dommersnes, Paul; Rozynek, Zbigniew; Mikkelsen, Alexander; Castberg, Rene; Kjerstad, Knut; Hersvik, Kjetil; Otto Fossum, Jon

    2013-01-01

    Adsorption and assembly of colloidal particles at the surface of liquid droplets are at the base of particle-stabilized emulsions and templating. Here we report that electrohydrodynamic and electro-rheological effects in leaky-dielectric liquid drops can be used to structure and dynamically control colloidal particle assemblies at drop surfaces, including electric-field-assisted convective assembly of jammed colloidal ‘ribbons’, electro-rheological colloidal chains confined to a two-dimensional surface and spinning colloidal domains on that surface. In addition, we demonstrate the size control of ‘pupil’-like openings in colloidal shells. We anticipate that electric field manipulation of colloids in leaky dielectrics can lead to new routes of colloidosome assembly and design for ‘smart armoured’ droplets. PMID:23811716

  1. [Factors affecting activation and transference of soil colloidal phosphorus and related analysis technologies].

    PubMed

    Zhao, Yue; Liang, Xin-qiang; Fu, Chao-dong; Zhu, Si-rui; Zhang, Yi-xiang; Ji, Yuan-jing

    2015-04-01

    Colloids play a key role in the transference process of phosphorus (P) in soil. Activation and transference of soil colloidal phosphorus have great effect on soil P pool and the surrounding water quality. This paper summarized the current studies on soil colloidal P, discussing the effects of the various factors (e. g., soil physical and chemical properties, fertilization, rainfall and soil amendments) on the transference of soil colloidal P. Some advanced analysis technologies (e.g., flow field-flow fractionation, transmission electron microscope-energy dispersive X-ray spectrometer, X-ray absorption near-edge structure and nuclear magnetic resonance) and methods of reducing soil colloidal P were also involved. This review would provide important information on the mechanism of soil colloidal P transference.

  2. Static three-dimensional topological solitons in fluid chiral ferromagnets and colloids.

    PubMed

    Ackerman, Paul J; Smalyukh, Ivan I

    2017-04-01

    Three-dimensional (3D) topological solitons are continuous but topologically nontrivial field configurations localized in 3D space and embedded in a uniform far-field background, that behave like particles and cannot be transformed to a uniform state through smooth deformations. Many topologically nontrivial 3D solitonic fields have been proposed. Yet, according to the Hobart-Derrick theorem, physical systems cannot host them, except for nonlinear theories with higher-order derivatives such as the Skyrme-Faddeev model. Experimental discovery of such solitons is hindered by the need for spatial imaging of the 3D fields, which is difficult in high-energy physics and cosmology. Here we experimentally realize and numerically model stationary topological solitons in a fluid chiral ferromagnet formed by colloidal dispersions of magnetic nanoplates. Such solitons have closed-loop preimages-3D regions with a single orientation of the magnetization field. We discuss localized structures with different linking of preimages quantified by topological Hopf invariants. The chirality is found to help in overcoming the constraints of the Hobart-Derrick theorem, like in two-dimensional ferromagnetic solitons, dubbed 'baby skyrmions'. Our experimental platform may lead to solitonic condensed matter phases and technological applications.

  3. Sizing of colloidal particle and protein molecules in a hanging fluid drop

    NASA Technical Reports Server (NTRS)

    Ansari, Rafat R.; Suh, Kwang I.

    1995-01-01

    We report non-invasive particle size measurements of polystyrene latex colloidal particles and bovine serum albumin (BSA) protein molecules suspended in tiny hanging fluid drops of 30 micro-Liter volume using a newly designed fiber optic probe. The probe is based upon the principles of the technique of dynamic light scattering (DLS). The motivation for this work comes from growing protein crystals in outer space. Protein crystals have been grown previously in hanging drops in microgravity experiments on-board the space shuttle orbiter. However, obtaining quantitative information on nucleation and growth of the protein crystals in real time has always been a desired goal, but hitherto not achieved. Several protein researchers have shown interest in using DLS to monitor crystal growth process in a droplet, but elaborate instrumentation and optical alignment problems have made in-situ applications difficult. We demonstrate that such an experiment is now possible. Our system offers fast (5 seconds) determination of particle size, utilize safe levels of very low laser power (less than or equal to 0.2 mW), a small scattering volume (approximately 2 x 10(exp -5) cu mm) and high spatial coherence (Beta) values. This is a major step forward when compared to currently available DLS systems.

  4. Partitioning into Colloidal Structures of Fasted State Intestinal Fluid Studied by Molecular Dynamics Simulations

    PubMed Central

    2016-01-01

    We performed molecular dynamics (MD) simulations to obtain insights into the structure and molecular interactions of colloidal structures present in fasted state intestinal fluid. Drug partitioning and interaction were studied with a mixed system of the bile salt taurocholate (TCH) and 1,2-dilinoleoyl-sn-glycero-3-phosphocholine (DLiPC). Spontaneous aggregation of TCH and DLiPC from unconstrained MD simulations at the united-atom level using the Berger/Gromos54A7 force fields demonstrated that intermolecular hydrogen bonding between TCH molecules was an important factor in determining the overall TCH and DLiPC configuration. In bilayered systems, these intermolecular hydrogen bonds resulted in embedded transmembrane TCH clusters. Free energy simulations using the umbrella sampling technique revealed that the stability of these transmembrane TCH clusters was superior when they consisted of 3 or 4 TCH per bilayer leaflet. All-atom simulations using the Slipids/GAFF force fields showed that the TCH embedded in the bilayer decreased the energy barrier to penetrate the bilayer (ΔGpen) for water, ethanol, and carbamazepine, but not for the more lipophilic felodipine and danazol. This suggests that diffusion of hydrophilic to moderately lipophilic molecules through the bilayer is facilitated by the embedded TCH molecules. However, the effect of embedded TCH on the overall lipid/water partitioning was significant for danazol, indicating that the incorporation of TCH plays a crucial role for the partitioning of lipophilic solutes into e.g. lipidic vesicles existing in fasted state intestinal fluids. To conclude, the MD simulations revealed important intermolecular interactions in lipidic bilayers, both between the bile components themselves and with the drug molecules. PMID:27934534

  5. Self-diffusiophoresis of catalytically active patchy colloids near a solid boundary

    NASA Astrophysics Data System (ADS)

    Maldarelli, Charles; Mozaffari, Ali; Sharifi-Mood, Nima; Koplik, Joel

    2014-11-01

    Active colloidal swimmers designed to move along an envisioned path to ascertain various applications in nanotechnology. In diffusiophoresis, gradients in the solute concentration across the colloid create an imbalance force due to the interactions of the solute with the particle. These forces can also be integrated into a self-propulsion by choosing a reactant as a solute which undergoes a surface reaction only on one face of a colloid. The effect of boundaries in self-diffusiophoresis is not purely to retard the motion, because the boundaries also alter the solutal gradient. We developed an analytical approach to investigate the dynamics of swimming colloid near an infinite planar wall assuming constant flux production and a repulsive interaction between product solute and the colloid. The motion of the colloid was decomposed into translational motions perpendicular and parallel to the wall and a rigid body rotation around the third axis. Our analysis indicates when a patchy colloid approaches the boundary with an inclination angle with respect to the unit normal of the wall, the asymmetric distribution of product around the colloid compels it to rotate and redirects its reaction section towards the wall and thereby the colloid will be moved away from the wall.

  6. Study of adsorption process of iron colloid substances on activated carbon by ultrasound

    NASA Astrophysics Data System (ADS)

    Machekhina, K. I.; Shiyan, L. N.; Yurmazova, T. A.; Voyno, D. A.

    2015-04-01

    The paper reports on the adsorption of iron colloid substances on activated carbon (PAC) Norit SA UF with using ultrasound. It is found that time of adsorption is equal to three hours. High-frequency electrical oscillation is 35 kHz. The adsorption capacity of activated carbon was determined and it is equal to about 0.25 mg iron colloid substances /mg PAC. The iron colloid substances size ranging from 30 to 360 nm was determined. The zeta potential of iron colloid substances which consists of iron (III) hydroxide, silicon compounds and natural organic substances is about (-38mV). The process of destruction iron colloid substances occurs with subsequent formation of a precipitate in the form of Fe(OH)3 as a result of the removal of organic substances from the model solution.

  7. Effect of perioperative crystalloid or colloid fluid therapy on hemorrhage, coagulation competence, and outcome

    PubMed Central

    Rasmussen, Kirsten C.; Secher, Niels H.; Pedersen, Tom

    2016-01-01

    Abstract Background: A meta-analysis concerning perioperative coagulation competence, hemorrhage, and outcome was conducted including the use of hydroxyethyl starches (HESs), dextran, or albumin versus administration of a crystalloid as control to assess the efficacy and safety of colloids and crystalloids for fluid administration during major elective surgery. Surgery was restricted to cardiovascular and noncardiovascular surgery, and HESs were stratified to HES 130/0.4 and HES 200/0.5. Methods: We searched Cochrane Central Register of Controlled Trials, MEDLINE, ISI Web of Science, EMBASE, conference proceedings, reference lists, and databases of ongoing trials. Results: Thirty one primary clinical randomized controlled trials included 2287 patients undergoing major surgery from January 2000 to August 2015. The perioperative changes in coagulation competence were measured by thromboelastography (TEG) maximum amplitude (MA) in 9 studies administering crystalloids versus HES and in 4 studies administering albumin versus HES. All studies but 1 disclosed increased reduction in TEG-MA following HES administration (P = 0.0001 and 0.0002). The total loss of blood was reported in 17 studies in which crystalloids were compared to HES and 12 studies reported increased blood loss after administration of HES (P < 0.003). When administering albumin versus HES, 6 studies reported reduced hemorrhage associated with albumin administration (P = 0.005). Reoperation was not significantly reduced by the use of crystalloids, but may be more frequent after HESs compared to albumin (P < 0.03). In this analysis, more patients admitted to administration of HESs were exposed to decrease coagulation competence, compared to perioperative crystalloids and albumin administration. Conclusion: This stratified meta-analysis showed that increased blood loss was found in noncardiovascular surgery among patients receiving HES compared with crystalloids, followed by a marked

  8. Silver colloid nanoparticles: synthesis, characterization, and their antibacterial activity.

    PubMed

    Panacek, Ales; Kvítek, Libor; Prucek, Robert; Kolar, Milan; Vecerova, Renata; Pizúrova, Nadezda; Sharma, Virender K; Nevecna, Tat'jana; Zboril, Radek

    2006-08-24

    A one-step simple synthesis of silver colloid nanoparticles with controllable sizes is presented. In this synthesis, reduction of [Ag(NH(3))(2)](+) complex cation by four saccharides was performed. Four saccharides were used: two monosaccharides (glucose and galactose) and two disaccharides (maltose and lactose). The syntheses performed at various ammonia concentrations (0.005-0.20 mol L(-1)) and pH conditions (11.5-13.0) produced a wide range of particle sizes (25-450 nm) with narrow size distributions, especially at the lowest ammonia concentrations. The average size, size distribution, morphology, and structure of particles were determined by dynamic light scattering (DLS), transmission electron microscopy (TEM), and UV/Visible absorption spectrophotometry. The influence of the saccharide structure (monosacharides versus disaccharides) on the size of silver particles is briefly discussed. The reduction of [Ag(NH(3))(2)](+) by maltose produced silver particles with a narrow size distribution with an average size of 25 nm, which showed high antimicrobial and bactericidal activity against Gram-positive and Gram-negative bacteria, including highly multiresistant strains such as methicillin-resistant Staphylococcus aureus. Antibacterial activity of silver nanoparticles was found to be dependent on the size of silver particles. A very low concentration of silver (as low as 1.69 mug/mL Ag) gave antibacterial performance.

  9. Activity-assisted self-assembly of colloidal particles

    NASA Astrophysics Data System (ADS)

    Mallory, S. A.; Cacciuto, A.

    2016-08-01

    We outline a basic strategy of how self-propulsion can be used to improve the yield of a typical colloidal self-assembly process. The success of this approach is predicated on the thoughtful design of the colloidal building block as well as how self-propulsion is endowed to the particle. As long as a set of criteria are satisfied, it is possible to significantly increase the rate of self-assembly, and greatly expand the window in parameter space where self-assembly can occur. In addition, we show that by tuning the relative on-off time of the self-propelling force it is possible to modulate the effective speed of the colloids allowing for further optimization of the self-assembly process.

  10. Clustering and Pattern Formation in Chemorepulsive Active Colloids

    NASA Astrophysics Data System (ADS)

    Liebchen, Benno; Marenduzzo, Davide; Pagonabarraga, Ignacio; Cates, Michael E.

    2015-12-01

    We demonstrate that migration away from self-produced chemicals (chemorepulsion) generates a generic route to clustering and pattern formation among self-propelled colloids. The clustering instability can be caused either by anisotropic chemical production, or by a delayed orientational response to changes of the chemical environment. In each case, chemorepulsion creates clusters of a self-limiting area which grows linearly with self-propulsion speed. This agrees with recent observations of dynamic clusters in Janus colloids (albeit not yet known to be chemorepulsive). More generally, our results could inform design principles for the self-assembly of chemorepulsive synthetic swimmers and/or bacteria into nonequilibrium patterns.

  11. Emergent Cometlike Swarming of Optically Driven Thermally Active Colloids

    NASA Astrophysics Data System (ADS)

    Cohen, Jack A.; Golestanian, Ramin

    2014-02-01

    We propose a simple system of optically driven colloids that convert light into heat and move in response to self-generated and collectively generated thermal gradients. We show that the system exhibits self-organization into a moving cometlike swarm and characterize the structure and response of the swarm to a light-intensity-dependent external tuning parameter. We observe many interesting features in this nonequilibrium system including circulation and evaporation, intensity-dependent shape, density and temperature fluctuations, and ejection of hot colloids from the swarm tip.

  12. An adaptive extended finite element method for the analysis of agglomeration of colloidal particles in a flowing fluid

    SciTech Connect

    Choi, Young Joon; Jorshari, Razzi Movassaghi; Djilali, Ned

    2015-03-10

    Direct numerical simulations of the flow-nanoparticle interaction in a colloidal suspension are presented using an extended finite element method (XFEM) in which the dynamics of the nanoparticles is solved in a fully-coupled manner with the flow. The method is capable of accurately describing solid-fluid interfaces without the need of boundary-fitted meshes to investigate the dynamics of particles in complex flows. In order to accurately compute the high interparticle shear stresses and pressures while minimizing computing costs, an adaptive meshing technique is incorporated with the fluid-structure interaction algorithm. The particle-particle interaction at the microscopic level is modeled using the Lennard-Jones (LJ) potential and the corresponding potential parameters are determined by a scaling procedure. The study is relevant to the preparation of inks used in the fabrication of catalyst layers for fuel cells. In this paper, we are particularly interested in investigating agglomeration of the nanoparticles under external shear flow in a sliding bi-periodic Lees-Edwards frame. The results indicate that the external shear has a crucial impact on the structure formation of colloidal particles in a suspension.

  13. Hexadecapolar colloids

    NASA Astrophysics Data System (ADS)

    Senyuk, Bohdan; Puls, Owen; Tovkach, Oleh M.; Chernyshuk, Stanislav B.; Smalyukh, Ivan I.

    2016-02-01

    Outermost occupied electron shells of chemical elements can have symmetries resembling that of monopoles, dipoles, quadrupoles and octupoles corresponding to filled s-, p-, d- and f-orbitals. Theoretically, elements with hexadecapolar outer shells could also exist, but none of the known elements have filled g-orbitals. On the other hand, the research paradigm of `colloidal atoms' displays complexity of particle behaviour exceeding that of atomic counterparts, which is driven by DNA functionalization, geometric shape and topology and weak external stimuli. Here we describe elastic hexadecapoles formed by polymer microspheres dispersed in a liquid crystal, a nematic fluid of orientationally ordered molecular rods. Because of conically degenerate boundary conditions, the solid microspheres locally perturb the alignment of the nematic host, inducing hexadecapolar distortions that drive anisotropic colloidal interactions. We uncover physical underpinnings of formation of colloidal elastic hexadecapoles and describe the ensuing bonding inaccessible to elastic dipoles, quadrupoles and other nematic colloids studied previously.

  14. Hexadecapolar colloids

    PubMed Central

    Senyuk, Bohdan; Puls, Owen; Tovkach, Oleh M.; Chernyshuk, Stanislav B.; Smalyukh, Ivan I.

    2016-01-01

    Outermost occupied electron shells of chemical elements can have symmetries resembling that of monopoles, dipoles, quadrupoles and octupoles corresponding to filled s-, p-, d- and f-orbitals. Theoretically, elements with hexadecapolar outer shells could also exist, but none of the known elements have filled g-orbitals. On the other hand, the research paradigm of ‘colloidal atoms' displays complexity of particle behaviour exceeding that of atomic counterparts, which is driven by DNA functionalization, geometric shape and topology and weak external stimuli. Here we describe elastic hexadecapoles formed by polymer microspheres dispersed in a liquid crystal, a nematic fluid of orientationally ordered molecular rods. Because of conically degenerate boundary conditions, the solid microspheres locally perturb the alignment of the nematic host, inducing hexadecapolar distortions that drive anisotropic colloidal interactions. We uncover physical underpinnings of formation of colloidal elastic hexadecapoles and describe the ensuing bonding inaccessible to elastic dipoles, quadrupoles and other nematic colloids studied previously. PMID:26864184

  15. Hexadecapolar Colloids

    DOE PAGES

    Senyuk, Bohdan; Puls, Owen; Tovkach, Oleh M.; ...

    2016-02-11

    Outermost occupied electron shells of chemical elements can have symmetries resembling that of monopoles, dipoles, quadrupoles and octupoles corresponding to filled s-, p-, d- and forbitals. Theoretically, elements with hexadecapolar outer shells could also exist, but none of the known elements have filled g-orbitals. On the other hand, the research paradigm of ‘colloidal atoms’ displays complexity of particle behaviour exceeding that of atomic counterparts, which is driven by DNA functionalization, geometric shape and topology and weak external stimuli. We describe elastic hexadecapoles formed by polymer microspheres dispersed in a liquid crystal, a nematic fluid of orientationally ordered molecular rods. Becausemore » of conically degenerate boundary conditions, the solid microspheres locally perturb the alignment of the nematic host, inducing hexadecapolar distortions that drive anisotropic colloidal interactions. We uncover physical underpinnings of formation of colloidal elastic hexadecapoles and report the ensuing bonding inaccessible to elastic dipoles, quadrupoles and other nematic colloids studied previously.« less

  16. Hexadecapolar Colloids

    SciTech Connect

    Senyuk, Bohdan; Puls, Owen; Tovkach, Oleh M.; Chernyshuk, Stanislav B.; Smalyukh, Ivan I.

    2016-02-11

    Outermost occupied electron shells of chemical elements can have symmetries resembling that of monopoles, dipoles, quadrupoles and octupoles corresponding to filled s-, p-, d- and forbitals. Theoretically, elements with hexadecapolar outer shells could also exist, but none of the known elements have filled g-orbitals. On the other hand, the research paradigm of ‘colloidal atoms’ displays complexity of particle behaviour exceeding that of atomic counterparts, which is driven by DNA functionalization, geometric shape and topology and weak external stimuli. We describe elastic hexadecapoles formed by polymer microspheres dispersed in a liquid crystal, a nematic fluid of orientationally ordered molecular rods. Because of conically degenerate boundary conditions, the solid microspheres locally perturb the alignment of the nematic host, inducing hexadecapolar distortions that drive anisotropic colloidal interactions. We uncover physical underpinnings of formation of colloidal elastic hexadecapoles and report the ensuing bonding inaccessible to elastic dipoles, quadrupoles and other nematic colloids studied previously.

  17. Non-equilibrium dynamics of an active colloidal ``chucker''

    NASA Astrophysics Data System (ADS)

    Valeriani, C.; Allen, R. J.; Marenduzzo, D.

    2010-05-01

    We report Monte Carlo simulations of the dynamics of a "chucker," a colloidal particle that emits smaller solute particles from its surface, isotropically and at a constant rate kc. We find that the diffusion constant of the chucker increases for small kc, as recently predicted theoretically. At large kc, the chucker diffuses more slowly due to crowding effects. We compare our simulation results to those of a "point particle" Langevin dynamics scheme in which the solute concentration field is calculated analytically, and in which hydrodynamic effects arising from colloid-solvent surface interactions can be accounted for in a coarse-grained way. By simulating the dragging of a chucker, we obtain an estimate of its apparent mobility coefficient which violates the fluctuation-dissipation theorem. We also characterize the probability density profile for a chucker which sediments onto a surface which either repels or absorbs the solute particles, and find that the steady state distributions are very different in the two cases. Our simulations are inspired by the biological example of exopolysaccharide-producing bacteria, as well as by recent experimental, simulation and theoretical work on phoretic colloidal "swimmers."

  18. Immersed Boundary Simulations of Active Fluid Droplets

    PubMed Central

    Hawkins, Rhoda J.

    2016-01-01

    We present numerical simulations of active fluid droplets immersed in an external fluid in 2-dimensions using an Immersed Boundary method to simulate the fluid droplet interface as a Lagrangian mesh. We present results from two example systems, firstly an active isotropic fluid boundary consisting of particles that can bind and unbind from the interface and generate surface tension gradients through active contractility. Secondly, a droplet filled with an active polar fluid with homeotropic anchoring at the droplet interface. These two systems demonstrate spontaneous symmetry breaking and steady state dynamics resembling cell motility and division and show complex feedback mechanisms with minimal degrees of freedom. The simulations outlined here will be useful for quantifying the wide range of dynamics observable in these active systems and modelling the effects of confinement in a consistent and adaptable way. PMID:27606609

  19. Application of colloid probe atomic force microscopy to the adhesion of thin films of viscous and viscoelastic silicone fluids.

    PubMed

    Bowen, James; Cheneler, David; Andrews, James W; Avery, Andrew R; Zhang, Zhibing; Ward, Michael C L; Adams, Michael J

    2011-09-20

    The adhesive characteristics of thin films (0.2-2 μm) of linear poly(dimethylsiloxane) (PDMS) liquids with a wide range of molecular weights have been measured using an atomic force microscope with a colloid probe (diameters 5 and 12 μm) for different separation velocities. The data were consistent with a residual film in the contact region having a thickness of ∼6 nm following an extended dwell time before separation of the probe. It was possible to estimate the maximum adhesive force as a function of the capillary number, Ca, by applying existing theoretical models based on capillary interactions and viscous flow except at large values of Ca in the case of viscoelastic fluids, for which it was necessary to develop a nonlinear viscoelastic model. The compliance of the atomic force microscope colloid beam was an important factor in governing the retraction velocity of the probe and therefore the value of the adhesive force, but the inertia of the beam and viscoelastic stress overshoot effects were not significant in the range of separation velocities investigated.

  20. Fluid transport by active elastic membranes

    NASA Astrophysics Data System (ADS)

    Evans, Arthur A.; Lauga, Eric

    2011-09-01

    A flexible membrane deforming its shape in time can self-propel in a viscous fluid. Alternatively, if the membrane is anchored, its deformation will lead to fluid transport. Past work in this area focused on situations where the deformation kinematics of the membrane were prescribed. Here we consider models where the deformation of the membrane is not prescribed, but instead the membrane is internally forced. Both the time-varying membrane shape and the resulting fluid motion result then from a balance between prescribed internal active stresses, internal passive resistance, and external viscous stresses. We introduce two specific models for such active internal forcing: one where a distribution of active bending moments is prescribed, and one where active inclusions exert normal stresses on the membrane by pumping fluid through it. In each case, we asymptotically calculate the membrane shape and the fluid transport velocities for small forcing amplitudes, and recover our results using scaling analysis.

  1. Unification of dynamic density functional theory for colloidal fluids to include inertia and hydrodynamic interactions: derivation and numerical experiments.

    PubMed

    Goddard, B D; Nold, A; Savva, N; Yatsyshin, P; Kalliadasis, S

    2013-01-23

    Starting from the Kramers equation for the phase-space dynamics of the N-body probability distribution, we derive a dynamical density functional theory (DDFT) for colloidal fluids including the effects of inertia and hydrodynamic interactions (HI). We compare the resulting theory to extensive Langevin dynamics simulations for both hard rod systems and three-dimensional hard sphere systems with radially symmetric external potentials. As well as demonstrating the accuracy of the new DDFT, by comparing with previous DDFTs which neglect inertia, HI, or both, we also scrutinize the significance of including these effects. Close to local equilibrium we derive a continuum equation from the microscopic dynamics which is a generalized Navier-Stokes-like equation with additional non-local terms governing the effects of HI. For the overdamped limit we recover analogues of existing configuration-space DDFTs but with a novel diffusion tensor.

  2. Escherichia coli as a model active colloid: A practical introduction.

    PubMed

    Schwarz-Linek, Jana; Arlt, Jochen; Jepson, Alys; Dawson, Angela; Vissers, Teun; Miroli, Dario; Pilizota, Teuta; Martinez, Vincent A; Poon, Wilson C K

    2016-01-01

    The flagellated bacterium Escherichia coli is increasingly used experimentally as a self-propelled swimmer. To obtain meaningful, quantitative results that are comparable between different laboratories, reproducible protocols are needed to control, 'tune' and monitor the swimming behaviour of these motile cells. We critically review the knowledge needed to do so, explain methods for characterising the colloidal and motile properties of E. coli cells, and propose a protocol for keeping them swimming at constant speed at finite bulk concentrations. In the process of establishing this protocol, we use motility as a high-throughput probe of aspects of cellular physiology via the coupling between swimming speed and the proton motive force.

  3. The contribution of combined crystalloid and colloid osmosis to fluid and sodium management in peritoneal dialysis.

    PubMed

    Freida, P; Wilkie, M; Jenkins, S; Dallas, F; Issad, B

    2008-04-01

    The achievement of euvolemia is essential to the successful management of peritoneal dialysis patients. However, the concern that hypertonic glucose exchanges may have a role in long-term changes to the peritoneal membrane has lead to an alternative strategy to enhance ultrafiltration (UF) over the long dwell by combining crystalloid and colloid osmosis. This review summarizes the experience of mixing glucose or amino acids with polyglucose (icodextrin), with particular focus given to data from studies using glucose/icodextrin in combinations of 1.36%/7.5% and 2.61%/6.8%. Both combinations demonstrate a significant increment of UF volume and sodium removal compared with the component osmotic agents used individually over long dwells, with the 2.61%/6.8% mixture having an effect over dwells extending to 15 h. Hypothetically, the mechanism of the enhanced UF is the attenuation by the colloid osmotic force of the backflow of water through small pores from dialysate to the peritoneal capillary circulation once the crystalloid osmotic force has dissipated. This experience provides promising data that deserves further examination in longer term clinical studies.

  4. Visualization of the equilibrium position of colloidal particles at fluid-water interfaces by deposition of nanoparticles

    NASA Astrophysics Data System (ADS)

    Sabapathy, Manigandan; Kollabattula, Viswas; Basavaraj, Madivala G.; Mani, Ethayaraja

    2015-08-01

    We present a general yet simple method to measure the contact angle of colloidal particles at fluid-water interfaces. In this method, the particles are spread at the required fluid-water interface as a monolayer. In the water phase a chemical reaction involving reduction of a metal salt such as aurochloric acid is initiated. The metal grows as a thin film or islands of nanoparticles on the particle surface exposed to the water side of the interface. Analyzing the images of particles by high resolution scanning microscopy (HRSEM), we trace the three phase contact line up to which deposition of the metal film occurs. From geometrical relations, the three phase contact angle is then calculated. We report the measurements of the contact angle of silica and polystyrene (PS) particles at different interfaces such as air-water, decane-water and octanol-water. We have also applied this method to measure the contact angle of surfactant treated polystyrene particles at the air-water interface, and we find a non-monotonic change of the contact angle with the concentration of the surfactant. Our results are compared with the well-known gel trapping technique and we find good comparison with previous measurements.We present a general yet simple method to measure the contact angle of colloidal particles at fluid-water interfaces. In this method, the particles are spread at the required fluid-water interface as a monolayer. In the water phase a chemical reaction involving reduction of a metal salt such as aurochloric acid is initiated. The metal grows as a thin film or islands of nanoparticles on the particle surface exposed to the water side of the interface. Analyzing the images of particles by high resolution scanning microscopy (HRSEM), we trace the three phase contact line up to which deposition of the metal film occurs. From geometrical relations, the three phase contact angle is then calculated. We report the measurements of the contact angle of silica and polystyrene (PS

  5. Driven colloidal fluids: construction of dynamical density functional theories from exactly solvable limits

    NASA Astrophysics Data System (ADS)

    Scacchi, Alberto; Krüger, Matthias; Brader, Joseph M.

    2016-06-01

    The classical dynamical density functional theory (DDFT) provides an approximate extension of equilibrium DFT to treat nonequilibrium systems subject to Brownian dynamics. However, the method fails when applied to driven systems, such as sheared colloidal dispersions. The breakdown of DDFT can be traced back to an inadequate treatment of the flow-induced distortion of the pair correlation functions. By considering the distortion of the pair correlations to second order in the flow-rate we show how to systematically correct the DDFT for driven systems. As an application of our approach we consider Poiseuille flow. The theory predicts that the particles will accumulate in spatial regions where the local shear rate is small, an effect known as shear-induced migration. We compare these predictions to Brownian dynamics simulations with generally good agreement.

  6. Layered Double Hydroxide Nanoclusters: Aqueous, Concentrated, Stable, and Catalytically Active Colloids toward Green Chemistry.

    PubMed

    Tokudome, Yasuaki; Morimoto, Tsuyoshi; Tarutani, Naoki; Vaz, Pedro D; Nunes, Carla D; Prevot, Vanessa; Stenning, Gavin B G; Takahashi, Masahide

    2016-05-24

    Increasing attention has been dedicated to the development of nanomaterials rendering green and sustainable processes, which occur in benign aqueous reaction media. Herein, we demonstrate the synthesis of another family of green nanomaterials, layered double hydroxide (LDH) nanoclusters, which are concentrated (98.7 g/L in aqueous solvent), stably dispersed (transparent sol for >2 weeks), and catalytically active colloids of nano LDHs (isotropic shape with the size of 7.8 nm as determined by small-angle X-ray scattering). LDH nanoclusters are available as colloidal building blocks to give access to meso- and macroporous LDH materials. Proof-of-concept applications revealed that the LDH nanocluster works as a solid basic catalyst and is separable from solvents of catalytic reactions, confirming the nature of nanocatalysts. The present work closely investigates the unique physical and chemical features of this colloid, the formation mechanism, and the ability to act as basic nanocatalysts in benign aqueous reaction systems.

  7. Estimation of the critical behavior in an active colloidal system with Vicsek-like interactions

    NASA Astrophysics Data System (ADS)

    Trefz, Benjamin; Siebert, Jonathan Tammo; Speck, Thomas; Binder, Kurt; Virnau, Peter

    2017-02-01

    We study numerically the critical behavior of a modified, active Asakura-Oosawa model for colloid-polymer mixtures. The colloids are modeled as self-propelled particles with Vicsek-like interactions. This system undergoes phase separation between a colloid-rich and a polymer-rich phase, whereby the phase diagram depends on the strength of the Vicsek-like interactions. Employing a subsystem-block-density distribution analysis, we determine the critical point and make an attempt to estimate the critical exponents. In contrast to the passive model, we find that the critical point is not located on the rectilinear diameter. A first estimate of the critical exponents β and ν is consistent with the underlying 3d-Ising universality class observed for the passive model.

  8. Effect of the surface charge distribution on the fluid phase behavior of charged colloids and proteins

    NASA Astrophysics Data System (ADS)

    Blanco, Marco A.; Shen, Vincent K.

    2016-10-01

    A generic but simple model is presented to evaluate the effect of the heterogeneous surface charge distribution of proteins and zwitterionic nanoparticles on their thermodynamic phase behavior. By considering surface charges as continuous "patches," the rich set of surface patterns that is embedded in proteins and charged patchy particles can readily be described. This model is used to study the fluid phase separation of charged particles where the screening length is of the same order of magnitude as the particle size. In particular, two types of charged particles are studied: dipolar fluids and protein-like fluids. The former represents the simplest case of zwitterionic particles, whose charge distribution can be described by their dipole moment. The latter system corresponds to molecules/particles with complex surface charge arrangements such as those found in biomolecules. The results for both systems suggest a relation between the critical region, the strength of the interparticle interactions, and the arrangement of charged patches, where the critical temperature is strongly correlated to the magnitude of the dipole moment. Additionally, competition between attractive and repulsive charge-charge interactions seems to be related to the formation of fluctuating clusters in the dilute phase of dipolar fluids, as well as to the broadening of the binodal curve in protein-like fluids. Finally, a variety of self-assembled architectures are detected for dipolar fluids upon small changes to the charge distribution, providing the groundwork for studying the self-assembly of charged patchy particles.

  9. Visualization of the equilibrium position of colloidal particles at fluid-water interfaces by deposition of nanoparticles.

    PubMed

    Sabapathy, Manigandan; Kollabattula, Viswas; Basavaraj, Madivala G; Mani, Ethayaraja

    2015-09-07

    We present a general yet simple method to measure the contact angle of colloidal particles at fluid-water interfaces. In this method, the particles are spread at the required fluid-water interface as a monolayer. In the water phase a chemical reaction involving reduction of a metal salt such as aurochloric acid is initiated. The metal grows as a thin film or islands of nanoparticles on the particle surface exposed to the water side of the interface. Analyzing the images of particles by high resolution scanning microscopy (HRSEM), we trace the three phase contact line up to which deposition of the metal film occurs. From geometrical relations, the three phase contact angle is then calculated. We report the measurements of the contact angle of silica and polystyrene (PS) particles at different interfaces such as air-water, decane-water and octanol-water. We have also applied this method to measure the contact angle of surfactant treated polystyrene particles at the air-water interface, and we find a non-monotonic change of the contact angle with the concentration of the surfactant. Our results are compared with the well-known gel trapping technique and we find good comparison with previous measurements.

  10. Theory of nonlinear elasticity, stress-induced relaxation, and dynamic yielding in dense fluids of hard nonspherical colloids

    NASA Astrophysics Data System (ADS)

    Zhang, Rui; Schweizer, Kenneth S.

    2012-04-01

    We generalize the microscopic naïve mode coupling and nonlinear Langevin equation theories of the coupled translation-rotation dynamics of dense suspensions of uniaxial colloids to treat the effect of applied stress on shear elasticity, cooperative cage escape, structural relaxation, and dynamic and static yielding. The key concept is a stress-dependent dynamic free energy surface that quantifies the center-of-mass force and torque on a moving colloid. The consequences of variable particle aspect ratio and volume fraction, and the role of plastic versus double glasses, are established in the context of dense, glass-forming suspensions of hard-core dicolloids. For low aspect ratios, the theory provides a microscopic basis for the recently observed phenomenon of double yielding as a consequence of stress-driven sequential unlocking of caging constraints via reduction of the distinct entropic barriers associated with the rotational and translational degrees of freedom. The existence, and breadth in volume fraction, of the double yielding phenomena is predicted to generally depend on both the degree of particle anisotropy and experimental probing frequency, and as a consequence typically occurs only over a window of (high) volume fractions where there is strong decoupling of rotational and translational activated relaxation. At high enough concentrations, a return to single yielding is predicted. For large aspect ratio dicolloids, rotation and translation are always strongly coupled in the activated barrier hopping event, and hence for all stresses only a single yielding process is predicted.

  11. Dynamic Patterns in Active Fluids

    NASA Astrophysics Data System (ADS)

    Jülicher, Frank

    2012-02-01

    Biological matter is inherently dynamic and exhibits active properties. A key example is the force generation by molecular motors in the cell cytoskeleton. Such active processes give rise to the generation of active mechanical stresses and spontaneous flows in gel-like cytoskeletal networks. Active material behaviors play a key role for the dynamics of cellular processes such as cell locomotion and cell division. We will discuss intracellular flow patterns that are created by active processes in the cell cortex. By combining theory with quantitative experiments we show that observed flow patterns result from profiles of active stress generation in the system. We will also consider the situation where active stress is regulated by a diffusing molecular species. In this case, spatial concentration patterns are generated by the interplay of stress regulation and self-generated flow fields.

  12. Antibacterial Activity of Electrochemically Synthesized Colloidal Silver Nanoparticles Against Hospital-Acquired Infections

    NASA Astrophysics Data System (ADS)

    Thuc, Dao Tri; Huy, Tran Quang; Hoang, Luc Huy; Hoang, Tran Huy; Le, Anh-Tuan; Anh, Dang Duc

    2017-02-01

    This study evaluated the antibacterial activity of electrochemically synthesized colloidal silver nanoparticles (AgNPs) against hospital-acquired infections. Colloidal AgNPs were synthesized via a single process using bulk silver bars, bi-distilled water, trisodium citrate, and direct current voltage at room temperature. Colloidal AgNPs were characterized by transmission electron microscopy, field-emission scanning electron microscopy, and energy-dispersive x-ray analyses. The antibacterial activity of colloidal AgNPs against four bacterial strains isolated from clinical samples, including methicillin-resistant Staphylococcus aureus, Escherichia coli O157:H7, multidrug-resistant Pseudomonas aeruginosa, and carbapenem-resistant Klebsiella pneumonia, was evaluated by disc diffusion, minimum inhibitory concentration (MIC), and ultrathin sectioning electron microscopy. The results showed that the prepared AgNPs were 19.7 ± 4.3 nm in size, quasi-spherical, and of high purity. Zones of inhibition approximately 6-10 mm in diameter were found, corresponding to AgNPs concentrations of 50 μg/mL to 100 μg/mL. The MIC results revealed that the antibacterial activity of the prepared AgNPs was strongly dependent on the concentration and strain of the tested bacteria.

  13. Emergent Structures in an Active Polar Fluid: Dynamics of Shape, Scattering, and Merger

    NASA Astrophysics Data System (ADS)

    Husain, Kabir; Rao, Madan

    2017-02-01

    Spatially localized defect structures emerge spontaneously in a hydrodynamic description of an active polar fluid comprising polar "actin" filaments and "myosin" motor proteins that (un)bind to filaments and exert active contractile stresses. These emergent defect structures are characterized by distinct textures and can be either static or mobile—we derive effective equations of motion for these "extended particles" and analyze their shape, kinetics, interactions, and scattering. Depending on the impact parameter and propulsion speed, these active defects undergo elastic scattering or merger. Our results are relevant for the dynamics of actomyosin-dense structures at the cell cortex, reconstituted actomyosin complexes, and 2D active colloidal gels.

  14. Template-activated strategy toward one-step coating silica colloidal microspheres with sliver.

    PubMed

    Wang, Ke; Zhang, Xiaoli; Niu, Chunyu; Wang, Yongqiang

    2014-01-22

    Template-activated strategy was developed to coat silica (SiO2) colloidal microspheres with silver in one step, based on one-pot hydrothermal treatment of silver nitrate, PVP (poly(vinyl pyrrolidone)), and SiO2 colloidal microspheres in ammonia solution. In our reaction system, the surface of SiO2 colloidal microspheres was continually activated with negative-charged SiO(-) groups in ammonia solution, which accumulated [Ag(NH3)2](+) or Ag(+) ions around the SiO2 colloidal microspheres through electrostatic attraction; thereafter these ions could be reduced into Ag nanoparticles in situ by the weak reducer PVP in the solution, and then acted as seeds for the subsequent complete silver coating with the reaction proceeding. Therefore, the traditional three steps for complete silver coating, including prior surface modification, seeding, and subsequent growing, were effectively integrated into one step. The experimental results exhibited that perfect SiO2/Ag core/shell composite microspheres were successfully synthesized through optimizing the reaction parameters like the solvent ingredient, reducer, and the reaction temperature. Additionally, these obtained uniform composite microspheres were further used as SERS substrate by using R6G and thiram as probe molecules, and showed excellent trace detection of these organic chemicals in solution.

  15. Antibacterial activity of the pancreatic fluid.

    PubMed

    Rubinstein, E; Mark, Z; Haspel, J; Ben-Ari, G; Dreznik, Z; Mirelman, D; Tadmor, A

    1985-04-01

    The antibacterial activity of canine pancreatic fluid was investigated in an attempt to understand the resistance of this organ, when intact, to ascending bacterial infections. The pancreatic fluid demonstrated bactericidal activity against Escherichia coli, Shigella species, Salmonella species, and Klebsiella pneumoniae; bacteriostatic activity against coagulase-positive and coagulase-negative staphylococci and Pseudomonas aeruginosa; and fungistatic activity against Candida albicans. There was no demonstrable antibacterial activity against Bacteroides fragilis and Streptococcus faecalis. The antibacterial activity was dialyzable and pH dependent, but independent of heat, the activity of several digestive pancreatic enzymes, and the bacterial inoculum. Electron micrographs of Escherichia coli exposed to pancreatic fluid did not demonstrate changes in the bacterial cell wall. Tracer studies of susceptible bacteria demonstrated decreased leucine uptake when briefly exposed to pancreatic fluid. The antibacterial activity was found by column chromatography to be a small molecular peptide. It is likely that pancreatic antibacterial factors protect the pancreas from ascending bacterial infections and operate along with other factors in the homeostasis of the upper small bowel flora.

  16. The study of the antimicrobial activity of colloidal solutions of silver nanoparticles prepared using food stabilizers.

    PubMed

    Balandin, G V; Suvorov, O A; Shaburova, L N; Podkopaev, D O; Frolova, Yu V; Ermolaeva, G A

    2015-06-01

    The bactericidal effect of colloidal solutions of silver nanoparticles based on food stabilizers, gum arabic and chitosan, against bacterial cultures of microorganisms in food production is described. The antibacterial activity of nanotechnology products containing different amounts of stabilizing additives when applied to solid pH-neutral substrates is studied. For its evaluation a method making it possible to take into account the capability of nanoparticles to diffuse in solid media was applied. Minimal inhibitory concentrations of nanoparticles used against Erwinia herbicola, Pseudomonas fluorescens, Bacillus subtilis, Sarcina flava were found. A suggestion was made concerning the influence of the spatial structure of bacteria on the antibacterial activity of colloidal solutions of silver nanoparticles. The data concerning the antibacterial activity and minimal inhibiting concentrations of nanoparticles may be used for development of products suppressing activity of microorganisms hazardous for food production.

  17. Adsorption of colloidal particles traveling through a nanochannel containing a partially wetting fluid

    NASA Astrophysics Data System (ADS)

    Drazer, German; Acrivos, Andreas; Koplik, Joel; Khusid, Boris

    2002-11-01

    Emerging nano-structures enable one to manipulate and control flow of volumes as small as tens of attoliters. This provides revolutionary new capabilities to interrogate a nanosize object, - a protein, DNA fragment, virus particle, quantum dot, etc. - by imposing electrical and/or optical signals. The rapid advances in the fabrication of such systems highlight the need to understand the basic effects of nanoscale confinement on the flow of particles. We conducted molecular dynamics simulations of the translation of a closely-fitting solid sphere in a fluid-filled cylindrical nanochannel for a wide range of fluid-solid interactions corresponding to different wetting situations [1]. We used the simplest possible numerical framework, where all molecular interactions were modeled by a slightly modified Lennard-Jones potential. For fluids that are not completely wetting, we observed an interesting and novel adsorption phenomenon, in which a solid sphere, that was initially moving along the center of a fluid-filled nano-tube, meanders across the channel and suddenly adsorbs onto the wall. Thereafter, the adsorbed sphere either sticks to the wall and remains motionless on average, or separates slightly from the tube wall and then moves parallel to the tube axis, while rotating on average. However, at short times, i.e. when the solid sphere moves with its center close to the middle of the tube, surprisingly good agreement is observed between the results of the results of molecular dynamics and the predictions of the continuum mechanics in spite of the large thermal fluctuations present in this nano-scale system. The work was supported in parts by grants from NASA, DOE, DARPA, and NJ Commission on Science & Technology. 1. G. Drazer, A. Acrivos, J. Koplik, B. Khusid, Phys. Rev. Letters (submitted)

  18. Collective dynamics of chemically active particles trapped at a fluid interface.

    PubMed

    Domínguez, Alvaro; Malgaretti, P; Popescu, M N; Dietrich, S

    2016-10-12

    Chemically active colloids generate changes in the chemical composition of their surrounding solution and thereby induce flows in the ambient fluid which affect their dynamical evolution. Here we study the many-body dynamics of a monolayer of spherically symmetric active particles trapped at a fluid-fluid interface. To this end we consider a model for the large-scale spatial distribution of particles which incorporates the direct pair interaction (including also the capillary interaction which is caused specifically by the interfacial trapping) as well as the effect of hydrodynamic interactions (including the Marangoni flow induced by the response of the interface to the chemical activity). The values of the relevant physical parameters for typical experimental realizations of such systems are estimated and various scenarios, which are predicted by our approach for the dynamics of the monolayer, are discussed. In particular, we show that the chemically-induced Marangoni flow can prevent the clustering instability driven by the capillary attraction.

  19. Particle contact angles at fluid interfaces: pushing the boundary beyond hard uniform spherical colloids.

    PubMed

    Zanini, Michele; Isa, Lucio

    2016-08-10

    Micro and nanoparticles at fluid interfaces have been attracting increasing interest in the last few decades as building blocks for materials, as mechanical and structural probes for complex interfaces and as models for two-dimensional systems. The three-phase contact angle enters practically all aspects of the particle behavior at the interface: its thermodynamics (binding energy to the interface), dynamics (motion and drag at the interface) and interactions with the interface (adsorption and wetting). Moreover, many interactions among particles at the interface also strongly depend on the contact angle. These concepts have been extensively discussed for non-deformable, homogeneous and mostly spherical particles, but recent progress in particle synthesis and fabrication has instead moved in the direction of producing more complex micro and nanoscale objects, which can be responsive, deformable, heterogenous and/or anisotropic in shape, surface chemistry and material properties. These new particles have a much greater potential for applications and new science, and the study of their behavior at interfaces has only very recently started. In this paper, we critically review the current state of the art of the experimental methods available to measure the contact angle of micro and nanoparticles at fluid interfaces, indicating their strengths and limitations. We then comment on new particle systems that are currently attracting increasing interest in relation to their adsorption and assembly at fluid interfaces and discuss if and which ones of the current techniques are suited to investigate their properties at interfaces. Based on this discussion, we will finally try to indicate a direction in which new experimental methods should develop in the future to tackle the new challenges posed by the novel types of particles that more and more often are used at interfaces.

  20. Hemodynamic recovery after hypovolemic shock with lactated Ringer's and keratin resuscitation fluid (KRF), a novel colloid.

    PubMed

    Nunez, Fiesky A; Callahan, Michael F; Trach, Simon; Burnett, Luke R; Kislukhin, Victor; Smith, Thomas L; Van Dyke, Mark

    2013-10-01

    Death after severe hemorrhage remains an important cause of mortality in people under 50 years of age. Keratin resuscitation fluid (KRF) is a novel resuscitation solution made from keratin protein that may restore cardiovascular stability. This postulate was tested in rats that were exsanguinated to 40% of their blood volume. Test groups received either low or high volume resuscitation with either KRF or lactated Ringer's solution. KRF low volume was more effective than LR in recovering cardiac function, blood pressure and blood chemistry. Furthermore, in contrast to LR-treated rats, KRF-treated rats exhibited vital signs that resembled normal controls at 1-week.

  1. Using active colloids as machines to weave and braid on the micrometer scale

    NASA Astrophysics Data System (ADS)

    Goodrich, Carl P.; Brenner, Michael P.

    2017-01-01

    Controlling motion at the microscopic scale is a fundamental goal in the development of biologically inspired systems. We show that the motion of active, self-propelled colloids can be sufficiently controlled for use as a tool to assemble complex structures such as braids and weaves out of microscopic filaments. Unlike typical self-assembly paradigms, these structures are held together by geometric constraints rather than adhesive bonds. The out-of-equilibrium assembly that we propose involves precisely controlling the 2D motion of active colloids so that their path has a nontrivial topology. We demonstrate with proof-of-principle Brownian dynamics simulations that, when the colloids are attached to long semiflexible filaments, this motion causes the filaments to braid. The ability of the active particles to provide sufficient force necessary to bend the filaments into a braid depends on a number of factors, including the self-propulsion mechanism, the properties of the filament, and the maximum curvature in the braid. Our work demonstrates that nonequilibrium assembly pathways can be designed using active particles.

  2. UV-shielding property, photocatalytic activity and photocytotoxicity of ceria colloid solutions.

    PubMed

    Zholobak, N M; Ivanov, V K; Shcherbakov, A B; Shaporev, A S; Polezhaeva, O S; Baranchikov, A Ye; Spivak, N Ya; Tretyakov, Yu D

    2011-01-10

    UV-shielding property, photocatalytic activity and cytotoxicity (including photocytotoxicity) of citrate-stabilized ceria colloid solutions were studied. It was established that UV-shielding property (namely, the sun protection factor, the critical absorption wavelength and the UVA/UVB-ratio) of ceria nanoparticles are as good as those of titanium dioxide and zinc oxide nanoparticles. It was further demonstrated that ceria nanoparticles possesses substantially lower photocatalytic activity, which additionally decreases upon decrease in ceria particle size. It was found that colloid ceria solutions are non-toxic to mouse fibroblasts (L929) and fibroblast-like cells of African Green monkey (VERO). Moreover, ceria nanoparticles are capable to protect these cells from UV-irradiation-induced damage. It was proposed that nanocrystalline ceria could be used not only as UV-blocking material, but also as prophylactic and even therapeutic compound for sunburns treatment.

  3. UV and visible light active aqueous titanium dioxide colloids stabilized by surfactants.

    PubMed

    Pacia, Michał; Warszyński, Piotr; Macyk, Wojciech

    2014-09-07

    Attempts to increase the stability of photocatalytically active nanodispersions of titanium dioxide over a wide range of pH (3-10) were undertaken. Polyethylene glycols (PEGs) with different molecular weights and polyoxyethylenesorbitan monooleate (Tween® 80) were tested as stabilizing agents of TiO2 nanoparticles. The results of DLS measurements proved the stabilizing effect of Tween® 80 while the systems involving PEGs, independently of the polymer concentration, showed a tendency to form aggregates in neutral solutions. The colloids stabilized with Tween® 80 were photosensitized with 2,3-naphthalenediol (nd) or 2-hydroxy-3-naphthoic acid (hn) or catechol (cat). The photocatalytic activity of such colloids has been assessed in an azure B degradation reaction using both UV and visible light. The nd@TiO2 + Tween colloid appeared particularly photoactive upon visible light irradiation. Moreover, the comparison of activities of nd@TiO2 + Tween and TiO2 + Tween revealed a significantly better performance of the former nanodispersion, independently of the irradiation conditions (UV or visible light). This effect has been explained by different structures of micelles formed in the case of TiO2 and nd@TiO2 stabilized with Tween® 80.

  4. Effects of fluid preload (crystalloid or colloid) compared with crystalloid co-load plus ephedrine infusion on hypotension and neonatal outcome during spinal anaesthesia for caesarean delivery.

    PubMed

    Gunusen, I; Karaman, S; Ertugrul, V; Firat, V

    2010-07-01

    Preload with crystalloid or colloid solution is widely recommended for the prevention of maternal hypotension during spinal anaesthesia. A combination of simultaneous rapid crystalloid infusion with vasopressor has also been suggested. This study tested the hypothesis that ephedrine infusion with crystalloid loading at spinal anaesthesia would reduce hypotension and alter neonatal outcome compared with fluid preloading. One hundred and twenty women undergoing elective caesarean delivery were randomly allocated to one of three groups to receive rapid infusion of lactated Ringer's solution (20 ml.kg(-1), n=40) or 4% succinylated gelatin solution (500 ml, n =40) before spinal anaesthesia or an ephedrine infusion (1.25 mg.minute(-1)) plus lactated Ringer's solution (1000 ml, n=40) after spinal anaesthesia. The incidence of hypotension (moderate and severe) and the ephedrine dose used to treat hypotension were compared. Neonatal outcome was assessed using Apgar scores and umblical venous and arterial blood gas analysis. The frequency of moderate or severe hypotension was lower in the ephedrine group than in the crystalloid or colloid preload group (10% vs. 51% and 38%; 5% vs. 21% and 23% respectively, P < 0.05). The incidence of nausea was significantly different between the crystalloid preload and ephedrine group. Umbilical blood gas analysis and Apgar scores were similar in all groups. A combination of an ephedrine infusion at 1.25 mg.minute(-1) with a crystalloid co-load was more effective than fluid preloading with crystalloid or colloid in the prevention of moderate and severe hypotension.

  5. Active colloids at liquid-liquid interfaces: dynamic self-assembly and functionality

    NASA Astrophysics Data System (ADS)

    Snezhko, Alexey; Aranson, Igor

    2012-02-01

    Self-assembled materials must actively consume energy and remain out of equilibrium in order to support structural complexity and functional diversity. Colloids of interacting particles suspended at liquid-liquid interfaces and maintained out of equilibrium by external alternating electromagnetic fields develop nontrivial collective dynamics and self-assembly. We use ferromagnetic colloidal micro-particles (so the magnetic moment is fixed in each particle and interactions between colloids is highly anisotropic and directional) suspended over an interface of two immiscible liquids and energized by vertical alternating magnetic fields to demonstrate novel dynamic and active self-assembled structures (``asters'') which are not accessible through thermodynamic assembly. Structures are attributed to the interplay between surface waves, generated at the liquid/liquid interface by the collective response of magnetic microparticles to the alternating magnetic field, and hydrodynamic fields induced in the boundary layers of both liquids forming the interface. Two types of magnetic order are reported. We demonstrate that asters develop self-propulsion in the presence of a small in-plane dc magnetic field. We show that asters can capture, transport, and position target microparticles.

  6. Tuning the morphology, stability and photocatalytic activity of TiO{sub 2} nanocrystal colloids by tungsten doping

    SciTech Connect

    Xu, Haiping; Liao, Jianhua; Yuan, Shuai; Zhao, Yin; Zhang, Meihong; Wang, Zhuyi; Shi, Liyi

    2014-03-01

    Graphical abstract: - Highlights: • W{sup 6+}-doped TiO{sub 2} nanocrystal colloids were prepared by hydrothermal methods. • The properties of TiO{sub 2} nanocrystal colloids can be tuned by tungsten doping. • W{sup 6+}-doped TiO{sub 2} nanocrystal colloids show higher stability and dispersity. • W{sup 6+}-doped TiO{sub 2} nanocrystal colloids show higher photocatalytic activity. - Abstract: The effects of tungsten doping on the morphology, stability and photocatalytic activity of TiO{sub 2} nanocrystal colloids were investigated. The nanostructure, chemical state of Ti, W, O, and the properties of tungsten doped TiO{sub 2} samples were investigated carefully by TEM, XRD, XPS, UV–vis, PL and photocatalytic degradation experiments. And the structure–activity relationship was discussed according to the analysis and measurement results. The analysis results reveal that the morphology, zeta potential and photocatalytic activity of TiO{sub 2} nanocrystals can be easily tuned by changing the tungsten doping concentration. The tungsten doped TiO{sub 2} colloid combines the characters of high dispersity and high photocatalytic activity.

  7. Influence of iron solubility and charged surface-active compounds on lipid oxidation in fatty acid ethyl esters containing association colloids.

    PubMed

    Homma, Rika; Johnson, David R; McClements, D Julian; Decker, Eric A

    2016-05-15

    The impact of iron compounds with different solubilities on lipid oxidation was studied in the presence and absence of association colloids. Iron (III) sulfate only accelerated lipid oxidation in the presence of association colloids while iron (III) oleate accelerated oxidation in the presence and absence of association colloids. Further, iron (III) oxide retarded lipid oxidation both with and without association colloids. The impact of charged association colloids on lipid oxidation in ethyl oleate was also investigated. Association colloids consisting of the anionic surface-active compound dodecyl sulphosuccinate sodium salt (AOT), cationic surface-active compound hexadecyltrimethylammonium bromide (CTAB), and nonionic surface-active compound 4-(1,1,3,3-tetramethylbutyl)phenyl-polyethylene glycol (Triton X-100) retarded, promoted, and had no effect on lipid oxidation rates, respectively. These results indicate that the polarity of metal compounds and the charge of association colloids play a big role in lipid oxidation.

  8. Active dynamics of colloidal particles in time-varying laser speckle patterns

    PubMed Central

    Bianchi, Silvio; Pruner, Riccardo; Vizsnyiczai, Gaszton; Maggi, Claudio; Di Leonardo, Roberto

    2016-01-01

    Colloidal particles immersed in a dynamic speckle pattern experience an optical force that fluctuates both in space and time. The resulting dynamics presents many interesting analogies with a broad class of non-equilibrium systems like: active colloids, self propelled microorganisms, transport in dynamical intracellular environments. Here we show that the use of a spatial light modulator allows to generate light fields that fluctuate with controllable space and time correlations and a prescribed average intensity profile. In particular we generate ring-shaped random patterns that can confine a colloidal particle over a quasi one-dimensional random energy landscape. We find a mean square displacement that is diffusive at both short and long times, while a superdiffusive or subdiffusive behavior is observed at intermediate times depending on the value of the speckles correlation time. We propose two alternative models for the mean square displacement in the two limiting cases of a short or long speckles correlation time. A simple interpolation formula is shown to account for the full phenomenology observed in the mean square displacement across the entire range from fast to slow fluctuating speckles. PMID:27279540

  9. Wall-induced self-diffusiophoresis of active isotropic colloids

    NASA Astrophysics Data System (ADS)

    Yariv, Ehud

    2016-07-01

    While chemically active homogeneous spherical particles do not undergo self-diffusiophoresis in free solution, they may do so when suspended in the vicinity of a solid boundary. We explore this possibility using a first-order kinetic model of solute absorption, where the relative magnitude of reaction to diffusion is characterized by the Damköhler number Da . When the particle is remote from the wall, it is repelled from it with a velocity that scales inversely with the square of distance. The opposite extreme, when the ratio δ of separation distance to particle size is small, results in the anomalous scaling δ√{1/+2 Da }-1 2 of the solute concentration in the narrow gap separating the particle and wall. This irrational power may only be obtained by asymptotic matching with solute transport outside the gap. For Da <4 the self-propulsion speed possesses the same scaling, being set by the large pressures forming in the gap through a lubrication-type mechanism. For Da >4 the particle velocity is O (δ ) , set by the flow in the region outside the gap. Solute advection is subdominant to diffusion in both the remote and near-contact limits and accordingly affects neither the above scaling nor the resulting approximations.

  10. Wall-induced self-diffusiophoresis of active isotropic colloids

    NASA Astrophysics Data System (ADS)

    Yariv, Ehud

    2016-11-01

    While chemically-active homogeneous spherical particles do not undergo self-diffusiophoresis in free solution, they may do so when suspended in the vicinity of a solid boundary. We explore this possibility using a first-order kinetic model of solute absorption, where the relative magnitude of reaction to diffusion is characterized by the Damkohler number Da. When the particle is remote from the wall, it is repelled from it with a velocity that scales inversely with the square of distance. The opposite extreme, when the ratio δ of separation distance to particle size is small, results in the anomalous scaling δ √{/1 + 2 Da } - 1 2 of the solute concentration in the narrow gap separating the particle and wall. This irrational power may only be obtained by asymptotic matching with solute transport outside the gap. For Da < 4 the self-propulsion speed possesses the same scaling, being set by the large pressures forming in the gap through a lubrication-type mechanism. For Da > 4 the particle velocity is O (δ) , set by the flow in the region outside outside the gap. Solute advection is subdominant to diffusion in both the remote and near-contact limits, and accordingly affects neither the above scaling nor the resulting approximations.

  11. [Hydro-colloidal dressings which release hydro-active silver].

    PubMed

    Serra, N; Torres, O G; Romo, M I; Llovera, J M; Vigil-Escalera, L J; Soto, M A; González-Parra, S

    2005-02-01

    The study presented is a multicentric, prospective, open and comparative study designed with the objective of evaluating the performance of an antibacterial hydrocolloid dressing with hydroactivated silver (Comfeel Plata), when used to activate the healing process in wounds with high bacterial load, clinical signs of infection or malodour. Additionally, once the wound bed was appropriately prepared, a comparison in terms of efficacy was made between, on the one hand, continued treatment with the antibacterial hydrocolloid dressing, and, on the other hand, continued treatment with other dressings specifically designed for the proliferative phase of healing. Included into this study were 43 patients with chronic ulcers who were divided into two parallel treatment groups: In one group, Comfeel Plata (Coloplast AIS) was used until complete wound healing or for a maximum of 10-12 weeks, and in the second group Comfeel Plata (Coloplast A/S) was used until a clean wound bed was obtained and until the wound showed signs of positive evolution, at which moment the treatment was continued until complete healing or for a maximum of 10-12 weeks with dressings without silver designed especially for the proliferative phase of healing [Alione, Comfeel or Biatain (Coloplast AIS)]. The results obtained from the various study parameters indicate that the use of Comfeel Plata in the treatment of infected or colonized wounds prepares the wound bed and facilitates more rapid healing, and that the use of Comfeel Plata effectively reduces pain and malodour. The results indicate that once a clean wound bed is obtained, the use of a dressing without silver specifically for the proliferative phase will facilitate healing.

  12. Pattern formation in Active Polar Fluids

    NASA Astrophysics Data System (ADS)

    Gopinath, Arvind; Hagan, Michael; Baskaran, Aparna

    2011-03-01

    Systems such as bacterial suspensions or cytoskeletal filaments and motility assays can be described within the paradigm of active polar fluids. These systems have been shown to exhibit pattern formation raging from asters and vortices to traveling stripes. A coarse-grained description of such a fluid is given by a scalar density field and a vector polarization field. We study such a macroscopic description of the system using weakly nonlinear analysis and numerical simulations to map out the emergent pattern formation as a function of the hydrodynamic parameters in the context of two specific microscopic models - a quasi-2D suspension of cytoskeletal filaments and motor proteins and a system of self propelled hard rods that interact through excluded volume interactions. The authors thank the Brandeis MRSEC center for financial support.

  13. Colloidal Magnetic Fluids

    NASA Astrophysics Data System (ADS)

    Odenbach, Stefan

    While the electromagnetic force is microscopically simply the Lorentz force, its macroscopic form is more complicated, and given by expressions such as the Maxwell stress tensor and the Kelvin force. Their derivation is fairly opaque, at times even confusing, and their range of validity all but a well kept secret. These circumstances unnecessarily reduce the usefulness and trustworthiness of some key quantities in macroscopic electrodynamics. This article presents a thorough yet pedagogical derivation of the Maxwell stress tensor and electromagnetic force in condensed media. It starts from universally accepted inputs: conservation laws, thermodynamics and the Maxwell equations. Simplifications are considered for various limits, especially the equilibrium, with a range of validity assigned to each expression. Some widespread misconceptions are scrutinized, and hidden ambiguities in popular notations revealed. A number of phenomena typical of strongly polarizable systems, especially ferrofluid, are then considered. In addition to enhancing the appreciation of these systems, it helps to solidify the grasp of the introduced concepts and derived formulas, and it demonstrates the ease with which the Maxwell stress tensor can be handled, inviting theorists and experimentalists alike to embrace this useful quantity.

  14. Influence of naturally occurring dissolved organic matter, colloids, and cations on nanofiltration of pharmaceutically active and endocrine disrupting compounds.

    PubMed

    Sadmani, A H M Anwar; Andrews, Robert C; Bagley, David M

    2014-12-01

    This study examined the rejection of selected pharmaceutically active (PhAC) and endocrine disrupting compounds (EDCs) when using nanofiltration as a function of naturally occurring dissolved organic matter (DOM), colloidal particles, cations and their interactions. Lake Ontario water served as a source of natural DOM and colloidal particles. PhAC/EDC rejection experiments were conducted using raw Lake Ontario water and Lake Ontario water that was pre-treated with either ultrafiltration to remove colloidal particles, or fluidized ion exchange resins to remove DOM. Additionally, the concentration of cations (Ca(2+), Mg(2+), and Na(+)) in the raw and pre-treated water matrices was varied. While ionic PhACs and EDCs exhibited high rejections from all the water matrices examined, neutral compounds were most effectively rejected in water containing DOM and no colloids, and least effectively rejected from colloid-containing water with increased cations but no DOM. The presence of DOM significantly improved compound rejection and the increase in cation concentration significantly decreased rejection. The presence of colloids had comparatively little effect except to mitigate the impact of increased cation concentration, apparently providing some cation-buffering capacity. The sequence in which constituents are removed from waters during treatment may significantly impact PhAC and EDC removal, especially of neutral compounds.

  15. Living Clusters and Crystals from Low-Density Suspensions of Active Colloids

    NASA Astrophysics Data System (ADS)

    Mognetti, B. M.; Šarić, A.; Angioletti-Uberti, S.; Cacciuto, A.; Valeriani, C.; Frenkel, D.

    2013-12-01

    Recent studies aimed at investigating artificial analogs of bacterial colonies have shown that low-density suspensions of self-propelled particles confined in two dimensions can assemble into finite aggregates that merge and split, but have a typical size that remains constant (living clusters). In this Letter, we address the problem of the formation of living clusters and crystals of active particles in three dimensions. We study two systems: self-propelled particles interacting via a generic attractive potential and colloids that can move toward each other as a result of active agents (e.g., by molecular motors). In both cases, fluidlike “living” clusters form. We explain this general feature in terms of the balance between active forces and regression to thermodynamic equilibrium. This balance can be quantified in terms of a dimensionless number that allows us to collapse the observed clustering behavior onto a universal curve. We also discuss how active motion affects the kinetics of crystal formation.

  16. New class of turbulence in active fluids.

    PubMed

    Bratanov, Vasil; Jenko, Frank; Frey, Erwin

    2015-12-08

    Turbulence is a fundamental and ubiquitous phenomenon in nature, occurring from astrophysical to biophysical scales. At the same time, it is widely recognized as one of the key unsolved problems in modern physics, representing a paradigmatic example of nonlinear dynamics far from thermodynamic equilibrium. Whereas in the past, most theoretical work in this area has been devoted to Navier-Stokes flows, there is now a growing awareness of the need to extend the research focus to systems with more general patterns of energy injection and dissipation. These include various types of complex fluids and plasmas, as well as active systems consisting of self-propelled particles, like dense bacterial suspensions. Recently, a continuum model has been proposed for such "living fluids" that is based on the Navier-Stokes equations, but extends them to include some of the most general terms admitted by the symmetry of the problem [Wensink HH, et al. (2012) Proc Natl Acad Sci USA 109:14308-14313]. This introduces a cubic nonlinearity, related to the Toner-Tu theory of flocking, which can interact with the quadratic Navier-Stokes nonlinearity. We show that as a result of the subtle interaction between these two terms, the energy spectra at large spatial scales exhibit power laws that are not universal, but depend on both finite-size effects and physical parameters. Our combined numerical and analytical analysis reveals the origin of this effect and even provides a way to understand it quantitatively. Turbulence in active fluids, characterized by this kind of nonlinear self-organization, defines a new class of turbulent flows.

  17. Active Polar Two-Fluid Macroscopic Dynamics

    NASA Astrophysics Data System (ADS)

    Pleiner, Harald; Svensek, Daniel; Brand, Helmut R.

    2014-03-01

    We study the dynamics of systems with a polar dynamic preferred direction. Examples include the pattern-forming growth of bacteria (in a solvent, shoals of fish (moving in water currents), flocks of birds and migrating insects (flying in windy air). Because the preferred direction only exists dynamically, but not statically, the macroscopic variable of choice is the macroscopic velocity associated with the motion of the active units. We derive the macroscopic equations for such a system and discuss novel static, reversible and irreversible cross-couplings connected to this second velocity. We find a normal mode structure quite different compared to the static descriptions, as well as linear couplings between (active) flow and e.g. densities and concentrations due to the genuine two-fluid transport derivatives. On the other hand, we get, quite similar to the static case, a direct linear relation between the stress tensor and the structure tensor. This prominent ``active'' term is responsible for many active effects, meaning that our approach can describe those effects as well. In addition, we also deal with explicitly chiral systems, which are important for many active systems. In particular, we find an active flow-induced heat current specific for the dynamic chiral polar order.

  18. Potential fluid mechanic pathways of platelet activation.

    PubMed

    Shadden, Shawn C; Hendabadi, Sahar

    2013-06-01

    Platelet activation is a precursor for blood clotting, which plays leading roles in many vascular complications and causes of death. Platelets can be activated by chemical or mechanical stimuli. Mechanically, platelet activation has been shown to be a function of elevated shear stress and exposure time. These contributions can be combined by considering the cumulative stress or strain on a platelet as it is transported. Here, we develop a framework for computing a hemodynamic-based activation potential that is derived from a Lagrangian integral of strain rate magnitude. We demonstrate that such a measure is generally maximized along, and near to, distinguished material surfaces in the flow. The connections between activation potential and these structures are illustrated through stenotic flow computations. We uncover two distinct structures that may explain observed thrombus formation at the apex and downstream of stenoses. More broadly, these findings suggest fundamental relationships may exist between potential fluid mechanic pathways for mechanical platelet activation and the mechanisms governing their transport.

  19. Overview af MSFC's Applied Fluid Dynamics Analysis Group Activities

    NASA Technical Reports Server (NTRS)

    Garcia, Roberto; Griffin, Lisa; Williams, Robert

    2004-01-01

    This paper presents viewgraphs on NASA Marshall Space Flight Center's Applied Fluid Dynamics Analysis Group Activities. The topics include: 1) Status of programs at MSFC; 2) Fluid Mechanics at MSFC; 3) Relevant Fluid Dynamics Activities at MSFC; and 4) Shuttle Return to Flight.

  20. Fe-Impregnated Mineral Colloids for Peroxide Activation: Effects of Mineral Substrate and Fe Precursor.

    PubMed

    Li, Yue; Machala, Libor; Yan, Weile

    2016-02-02

    Heterogeneous iron species at the mineral/water interface are important catalysts for the generation of reactive oxygen species at circumneutral pH. One significant pathway leading to the formation of such species arises from deposition of dissolved iron onto mineral colloids due to changes in redox conditions. This study investigates the catalytic properties of Fe impregnated on silica, alumina, and titania nanoparticles (as prototypical mineral colloids). Fe impregnation was carried out by immersing the mineral nanoparticles in dilute Fe(II) or Fe(III) solutions at pH 6 and 3, respectively, in an aerobic environment. The uptake of iron per unit surface area follows the order of nTiO2 > nAl2O3 > nSiO2 for both types of Fe precursors. Impregnation of mineral particles in Fe(II) solutions results in predominantly Fe(III) species due to efficient surface-mediated oxidation. The catalytic activity of the impregnated solids to produce hydroxyl radical (·OH) from H2O2 decomposition was evaluated using benzoic acid as a probe compound under dark conditions. Invariably, the rates of benzoic acid oxidation with different Fe-laden particles increase with the surface density of Fe until a critical density above which the catalytic activity approaches a plateau, suggesting active Fe species are formed predominantly at low surface loadings. The critical surface density of Fe varies with the mineral substrate as well as the aqueous Fe precursor. Fe impregnated on TiO2 exhibits markedly higher activity than its Al2O3 and SiO2 counterparts. The speciation of interfacial Fe is analyzed with diffuse reflectance UV-vis analysis and interpretation of the data in the context of benzoic oxidation rates suggests that the surface activity of the solids for ·OH generation correlates strongly with the isolated (i.e., mononuclear) Fe species. Therefore, iron dispersed on mineral colloids is a significant form of reactive iron surfaces in the aquatic environment.

  1. Active photonic devices based on colloidal semiconductor nanocrystals and organometallic halide perovskites

    NASA Astrophysics Data System (ADS)

    Suárez Alvarez, Isaac

    2016-10-01

    Semiconductor nanocrystals have arisen as outstanding materials to develop a new generation of optoelectronic devices. Their fabrication under simple and low cost colloidal chemistry methods results in cheap nanostructures able to provide a wide range of optical functionalities. Their attractive optical properties include a high absorption cross section below the band gap, a high quantum yield emission at room temperature, or the capability of tuning the band-gap with the size or the base material. In addition, their solution process nature enables an easy integration on several substrates and photonic structures. As a consequence, these nanoparticles have been extensively proposed to develop several photonic applications, such as detection of light, optical gain, generation of light or sensing. This manuscript reviews the great effort undertaken by the scientific community to construct active photonic devices based on these nanoparticles. The conditions to demonstrate stimulated emission are carefully studied by comparing the dependence of the optical properties of the nanocrystals with their size, shape and composition. In addition, this paper describes the design of different photonic architectures (waveguides and cavities) to enhance the generation of photoluminescence, and hence to reduce the threshold of optical gain. Finally, semiconductor nanocrystals are compared to organometallic halide perovskites, as this novel material has emerged as an alternative to colloidal nanoparticles.

  2. New class of turbulence in active fluids

    PubMed Central

    Bratanov, Vasil; Frey, Erwin

    2015-01-01

    Turbulence is a fundamental and ubiquitous phenomenon in nature, occurring from astrophysical to biophysical scales. At the same time, it is widely recognized as one of the key unsolved problems in modern physics, representing a paradigmatic example of nonlinear dynamics far from thermodynamic equilibrium. Whereas in the past, most theoretical work in this area has been devoted to Navier–Stokes flows, there is now a growing awareness of the need to extend the research focus to systems with more general patterns of energy injection and dissipation. These include various types of complex fluids and plasmas, as well as active systems consisting of self-propelled particles, like dense bacterial suspensions. Recently, a continuum model has been proposed for such “living fluids” that is based on the Navier–Stokes equations, but extends them to include some of the most general terms admitted by the symmetry of the problem [Wensink HH, et al. (2012) Proc Natl Acad Sci USA 109:14308–14313]. This introduces a cubic nonlinearity, related to the Toner–Tu theory of flocking, which can interact with the quadratic Navier–Stokes nonlinearity. We show that as a result of the subtle interaction between these two terms, the energy spectra at large spatial scales exhibit power laws that are not universal, but depend on both finite-size effects and physical parameters. Our combined numerical and analytical analysis reveals the origin of this effect and even provides a way to understand it quantitatively. Turbulence in active fluids, characterized by this kind of nonlinear self-organization, defines a new class of turbulent flows. PMID:26598708

  3. Motility of active fluid drops on surfaces

    NASA Astrophysics Data System (ADS)

    Khoromskaia, Diana; Alexander, Gareth P.

    2015-12-01

    Drops of active liquid crystal have recently shown the ability to self-propel, which was associated with topological defects in the orientation of active filaments [Sanchez et al., Nature 491, 431 (2013), 10.1038/nature11591]. Here, we study the onset and different aspects of motility of a three-dimensional drop of active fluid on a planar surface. We analyze theoretically how motility is affected by orientation profiles with defects of various types and locations, by the shape of the drop, and by surface friction at the substrate. In the scope of a thin drop approximation, we derive exact expressions for the flow in the drop that is generated by a given orientation profile. The flow has a natural decomposition into terms that depend entirely on the geometrical properties of the orientation profile, i.e., its bend and splay, and a term coupling the orientation to the shape of the drop. We find that asymmetric splay or bend generates a directed bulk flow and enables the drop to move, with maximal speeds achieved when the splay or bend is induced by a topological defect in the interior of the drop. In motile drops the direction and speed of self-propulsion is controlled by friction at the substrate.

  4. SERS-active silver colloids prepared by reduction of silver nitrate with short-chain polyethylene glycol

    NASA Astrophysics Data System (ADS)

    Stiufiuc, Rares; Iacovita, Cristian; Lucaciu, Constantin M.; Stiufiuc, Gabriela; Dutu, Alina G.; Braescu, Cristiana; Leopold, Nicolae

    2013-01-01

    We report a fast, one-step, facile, and green preparation method that yields very stable and biocompatible silver colloids that are highly active as surface-enhanced Raman spectroscopy (SERS) platforms that has a possible application in biomedicine. Reduction of silver nitrate has been carried out using polyethylene glycol (PEG) which acts as both reducing agent and stabilizer. It turned out that the -OH groups provided by the addition of NaOH represent a key element in the successful synthesis of PEG-coated silver nanoparticles (AgNPs). The as-obtained silver colloids have been characterized by UV-visible spectroscopy, transmission electron spectroscopy, and SERS using 532- and 633-nm laser lines on a dispersive Raman spectrometer. Several analytes as methylene blue, p-aminothiophenol, amoxicillin, and Cu(PAR)2 were used to prove SERS enhancement of the obtained silver colloid. It has been found that the PEGylated AgNPs provide SERS signals comparable to those achieved using classical hydroxylamine and citrate-reduced silver colloids, thus demonstrating the ability of this new method to prepare biocompatible silver colloids.

  5. Collective behavior in out-of-equilibrium colloidal suspensions

    NASA Astrophysics Data System (ADS)

    Aranson, Igor S.

    2013-06-01

    Colloidal suspensions, heterogeneous fluids containing solid microscopic particles, play an important role in our everyday life, from food and pharmaceutical industries to medicine and nanotechnology. Colloidal suspensions can be divided in two major classes: equilibrium, and active, i.e. maintained out of thermodynamic equilibrium by external electric or magnetic fields, light, chemical reactions, or hydrodynamic shear flow. While the properties of equilibrium colloidal suspensions are fairly well understood, out-of-equilibrium colloids pose a formidable challenge and the research is in its early exploratory stage. The possibility of dynamic self-assembly, a natural tendency of simple building blocks to organize into complex functional architectures, is one of the most remarkable properties of out-of-equilibrium colloids. Examples range from tunable, self-healing colloidal crystals and membranes to self-assembled microswimmers and robots. In contrast to their equilibrium counterparts, out-of-equilibrium colloidal suspensions may exhibit novel material properties, e.g. reduced viscosity, enhanced self-diffusivity, etc. This work reviews recent developments in the field of self-assembly and collective behavior of out-of-equilibrium colloids, with the focus on the fundamental physical mechanisms.

  6. Colloidal Metamaterials at Optical Frequencies

    DTIC Science & Technology

    2014-07-18

    AFRL-OSR-VA-TR-2014-0184 Colloidal Metamaterials at Optical Frequencies Jennifer Dionne LELAND STANFORD JUNIOR UNIV CA Final Report 07/18/2014...Prescribed by ANSI Std. Z39.18 Colloidal Metamaterials at Optical Frequencies Annual Report, June 30, 2014 A. Investigators PI: Jennifer Dionne...team has combined theoretical and experimental methods to produce a colloidally -synthesized metamaterial fluid, or “metafluid,” exhibiting strong

  7. Theory of activated-rate processes under shear with application to shear-induced aggregation of colloids.

    PubMed

    Zaccone, Alessio; Wu, Hua; Gentili, Daniele; Morbidelli, Massimo

    2009-11-01

    Using an approximation scheme within the convective diffusion (two-body Smoluchowski) equation framework, we unveil the shear-driven aggregation mechanism at the origin of structure formation in sheared colloidal systems. The theory, verified against numerics and experiments, explains the induction time followed by explosive (irreversible) rise of viscosity observed in charge-stabilized colloidal and protein systems under steady shear. The Arrhenius-type equation with shear derived here, extending Kramers' theory in the presence of shear, clearly demonstrates the important role of shear drive in activated-rate processes as they are encountered in soft condensed matter.

  8. Integrating an electrically active colloidal quantum dot photodiode with a graphene phototransistor

    PubMed Central

    Nikitskiy, Ivan; Goossens, Stijn; Kufer, Dominik; Lasanta, Tania; Navickaite, Gabriele; Koppens, Frank H. L.; Konstantatos, Gerasimos

    2016-01-01

    The realization of low-cost photodetectors with high sensitivity, high quantum efficiency, high gain and fast photoresponse in the visible and short-wave infrared remains one of the challenges in optoelectronics. Two classes of photodetectors that have been developed are photodiodes and phototransistors, each of them with specific drawbacks. Here we merge both types into a hybrid photodetector device by integrating a colloidal quantum dot photodiode atop a graphene phototransistor. Our hybrid detector overcomes the limitations of a phototransistor in terms of speed, quantum efficiency and linear dynamic range. We report quantum efficiencies in excess of 70%, gain of 105 and linear dynamic range of 110 dB and 3 dB bandwidth of 1.5 kHz. This constitutes a demonstration of an optoelectronically active device integrated directly atop graphene and paves the way towards a generation of flexible highly performing hybrid two-dimensional (2D)/0D optoelectronics. PMID:27311710

  9. Direct visualization of free-volume-triggered activation of β relaxation in colloidal glass.

    PubMed

    Lu, Yunzhuo; Lu, Xing; Qin, Zuoxiang; Shen, Jun

    2016-07-01

    β relaxation, which is predicted by mode coupling theory and involves the localized motions of particles, initiates in a supercooled liquid and continues into glassy state. It correlates essentially with many fundamental properties of amorphous materials. Despite its importance, the underlying mechanisms leading to the β relaxation have remained elusive. As natural heterogeneity, the original distributed free volume has been supposed to be associated with the activation of β relaxation in amorphous solids. However, there has been no direct experimental proof for this hypothesis. Here we used a colloidal glass to directly observe the β relaxation and free-volume distribution. We found a spatial correlation between the β relaxation and free volume. The large free volume regions were observed to possess a low-energy cost of relaxation-induced strain, indicating that the large free volume region presenting a low-energy barrier for structural relaxation benefits the β relaxation.

  10. Overview of MSFC's Applied Fluid Dynamics Analysis Group Activities

    NASA Technical Reports Server (NTRS)

    Garcia, Roberto; Griffin, Lisa; Williams, Robert

    2002-01-01

    This viewgraph report presents an overview of activities and accomplishments of NASA's Marshall Space Flight Center's Applied Fluid Dynamics Analysis Group. Expertise in this group focuses on high-fidelity fluids design and analysis with application to space shuttle propulsion and next generation launch technologies. Topics covered include: computational fluid dynamics research and goals, turbomachinery research and activities, nozzle research and activities, combustion devices, engine systems, MDA development and CFD process improvements.

  11. Evaluation of Colloids and Activation Agents for Determination of Melamine Using UV-SERS

    PubMed Central

    2012-01-01

    UV-SERS measurements offer a great potential for environmental or food (detection of food contaminats) analytics. Here, the UV-SERS enhancement potential of various kinds of metal colloids, such as Pd, Pt, Au, Ag, Au–Ag core–shell, and Ag–Au core–shell with different shapes and sizes, were studied using melamine as a test molecule. The influence of different activation (KF, KCl, KBr, K2SO4) agents onto the SERS activity of the nanomaterials was investigated, showing that the combination of a particular nanoparticle with a special activation agent is extremely crucial for the observed SERS enhancement. In particular, the size dependence of spherical nanoparticles of one particular metal on the activator has been exploited. By doing so, it could be shown that the SERS enhancement increases or decreases for increasing or decreasing size of a nanoparticle, respectively. Overall, the presented results demonstrate the necessity to adjust the nanoparticle size and the activation agent for different experiments in order to achieve the best possible UV-SERS results. PMID:22428076

  12. Biopolymer-stabilized Pt nanoparticles colloid: a highly active and recyclable catalyst for biphasic catalysis

    NASA Astrophysics Data System (ADS)

    Wang, Yujia; Shen, Yueyue; Qiu, Yunfei; Zhang, Ting; Liao, Yang; Zhao, Shilin; Ma, Jun; Mao, Hui

    2016-10-01

    Noble metal nanoparticles are promising candidates to replace conventional bulk counterparts owing to their high activity and selectivity. To enable catalyst recovery, noble metal nanoparticles are often supported onto solid matrices to prepare heterogeneous catalyst. Although recycle of noble metal nanoparticles is realized by heterogenization, a loss of activity is usually encountered. In the present investigation, Pt nanoparticles with tunable particle size (1.85-2.80 nm) were facilely prepared by using polyphenols as amphiphilic stabilizers. The as-prepared Pt nanoparticles colloid solution could be used as highly active catalyst in aqueous-organic biphasic catalysis. The phenolic hydroxyls of polyphenols could constrain Pt nanoparticles in aqueous phase, and simultaneously, the aromatic scaffold of polyphenols ensured effective interactions between substrates and Pt nanoparticles. As a consequence, the obtained polyphenols-stabilized Pt nanoparticles exhibited high activity and cycling stability in biphasic hydrogenation of a series of unsaturated compounds. Compared with conventional heterogeneous Pt-C and Pt-Al2O3 catalysts, polyphenols-stabilized Pt nanoparticles showed obvious advantage both in activity and cycling stability.

  13. Colloidal Phenomena.

    ERIC Educational Resources Information Center

    Russel, William B.; And Others

    1979-01-01

    Described is a graduate level engineering course offered at Princeton University in colloidal phenomena stressing the physical and dynamical side of colloid science. The course outline, reading list, and requirements are presented. (BT)

  14. Overview of MSFC's Applied Fluid Dynamics Analysis Group Activities

    NASA Technical Reports Server (NTRS)

    Garcia, Roberto; Griffin, Lisa; Williams, Robert

    2003-01-01

    TD64, the Applied Fluid Dynamics Analysis Group, is one of several groups with high-fidelity fluids design and analysis expertise in the Space Transportation Directorate at Marshall Space Flight Center (MSFC). TD64 assists personnel working on other programs. The group participates in projects in the following areas: turbomachinery activities, nozzle activities, combustion devices, and the Columbia accident investigation.

  15. Increasing entropy for colloidal stabilization

    PubMed Central

    Mo, Songping; Shao, Xuefeng; Chen, Ying; Cheng, Zhengdong

    2016-01-01

    Stability is of paramount importance in colloidal applications. Attraction between colloidal particles is believed to lead to particle aggregation and phase separation; hence, stability improvement can be achieved through either increasing repulsion or reducing attraction by modifying the fluid medium or by using additives. Two traditional mechanisms for colloidal stability are electrostatic stabilization and steric stabilization. However, stability improvement by mixing attractive and unstable particles has rarely been considered. Here, we emphasize the function of mixing entropy in colloidal stabilization. Dispersion stability improvement is demonstrated by mixing suspensions of attractive nanosized titania spheres and platelets. A three-dimensional phase diagram is proposed to illustrate the collaborative effects of particle mixing and particle attraction on colloidal stability. This discovery provides a novel method for enhancing colloidal stability and opens a novel opportunity for engineering applications. PMID:27872473

  16. Increasing entropy for colloidal stabilization

    NASA Astrophysics Data System (ADS)

    Mo, Songping; Shao, Xuefeng; Chen, Ying; Cheng, Zhengdong

    2016-11-01

    Stability is of paramount importance in colloidal applications. Attraction between colloidal particles is believed to lead to particle aggregation and phase separation; hence, stability improvement can be achieved through either increasing repulsion or reducing attraction by modifying the fluid medium or by using additives. Two traditional mechanisms for colloidal stability are electrostatic stabilization and steric stabilization. However, stability improvement by mixing attractive and unstable particles has rarely been considered. Here, we emphasize the function of mixing entropy in colloidal stabilization. Dispersion stability improvement is demonstrated by mixing suspensions of attractive nanosized titania spheres and platelets. A three-dimensional phase diagram is proposed to illustrate the collaborative effects of particle mixing and particle attraction on colloidal stability. This discovery provides a novel method for enhancing colloidal stability and opens a novel opportunity for engineering applications.

  17. Viscosity of colloidal suspensions

    SciTech Connect

    Cohen, E.G.D.; Schepper, I.M. de

    1995-12-31

    Simple expressions are given for the effective Newtonian viscosity as a function of concentration as well as for the effective visco-elastic response as a function of concentration and imposed frequency, of monodisperse neutral colloidal suspensions over the entire fluid range. The basic physical mechanisms underlying these formulae are discussed. The agreement with existing experiments is very good.

  18. Microfluidic control using colloidal devices.

    PubMed

    Terray, Alex; Oakey, John; Marr, David W M

    2002-06-07

    By manipulating colloidal microspheres within customized channels, we have created micrometer-scale fluid pumps and particulate valves. We describe two positive-displacement designs, a gear and a peristaltic pump, both of which are about the size of a human red blood cell. Two colloidal valve designs are also demonstrated, one actuated and one passive, for the direction of cells or small particles. The use of colloids as both valves and pumps will allow device integration at a density far beyond what is currently achievable by other approaches and may provide a link between fluid manipulation at the macro- and nanoscale.

  19. Microfluidic Control Using Colloidal Devices

    NASA Astrophysics Data System (ADS)

    Terray, Alex; Oakey, John; Marr, David W. M.

    2002-06-01

    By manipulating colloidal microspheres within customized channels, we have created micrometer-scale fluid pumps and particulate valves. We describe two positive-displacement designs, a gear and a peristaltic pump, both of which are about the size of a human red blood cell. Two colloidal valve designs are also demonstrated, one actuated and one passive, for the direction of cells or small particles. The use of colloids as both valves and pumps will allow device integration at a density far beyond what is currently achievable by other approaches and may provide a link between fluid manipulation at the macro- and nanoscale.

  20. 234U /238U and 230Th /234U activity ratios in the colloidal phases of aquifers in lateritic weathered zones

    NASA Astrophysics Data System (ADS)

    Short, Stephen A.; Lowson, Richard T.; Ellis, John

    1988-11-01

    A procedure was developed for comparing solute and colloid phases of groundwaters in contact with uranium ore bodies at Nabarlek and Koongarra in the Alligator Rivers region, Northern Territory, Australia. Single-pass ultrafiltration of large volumes with cut-offs of 18 nm and 1 μm was used. Colloids were composed of Fe and Si species with sorbed U and U daughters. Uranium isotopes were mostly present as soluble species. Thorium was significantly associated with the colloids. The 234U /238U activity ratios (ARs) were similar in solute and colloid phases close to the ore bodies but further down-gradient colloids were generally more depleted of 234U than the solute. The 230Th /234U ARs rose from very low values for both solute and colloid phases close to the ore bodies through several orders of magnitude to much higher values further down-gradient. Colloid 230Th /234U ARs were always significantly greater than solute ARs. Results were consistent with a systematic leaching of U from colloids going down-gradient and very little mobilization of ore-body 230Th relative to U. Ubiquitous complexed 232Th appeared to suppress the solubility of 230Th.

  1. EDITORIAL: Colloidal suspensions Colloidal suspensions

    NASA Astrophysics Data System (ADS)

    Petukhov, Andrei; Kegel, Willem; van Duijneveldt, Jeroen

    2011-05-01

    Special issue in honour of Henk Lekkerkerker's 65th birthday Professor Henk N W Lekkerkerker is a world-leading authority in the field of experimental and theoretical soft condensed matter. On the occasion of his 65th birthday in the summer of 2011, this special issue celebrates his many contributions to science. Henk Lekkerkerker obtained his undergraduate degree in chemistry at the University of Utrecht (1968) and moved to Calgary where he received his PhD in 1971. He moved to Brussels as a NATO fellow at the Université Libre de Bruxelles and was appointed to an assistant professorship (1974), an associate professorship (1977) and a full professorship (1980) in physical chemistry at the Vrije Universiteit Brussel. In 1985 he returned to The Netherlands to take up a professorship at the Van 't Hoff Laboratory, where he has been ever since. He has received a series of awards during his career, including the Onsager Medal (1999) of the University of Trondheim, the Bakhuys Roozeboom Gold Medal (2003) of the Royal Dutch Academy of Arts and Sciences (KNAW), the ECIS-Rhodia European Colloid and Interface Prize (2003), and the Liquid Matter Prize of the European Physical Society (2008). He was elected a member of KNAW in 1996, was awarded an Academy Chair position in 2005, and has held several visiting lectureships. Henk's work focuses on phase transitions in soft condensed matter, and he has made seminal contributions to both the theoretical and experimental aspects of this field. Here we highlight three major themes running through his work, and a few selected publications. So-called depletion interactions may lead to phase separation in colloid-polymer mixtures, and Henk realised that the partitioning of polymer needs to be taken into account to describe the phase behaviour correctly [1]. Colloidal suspensions can be used as model fluids, with the time- and length-scales involved leading to novel opportunities, notably the direct observation of capillary waves at a

  2. Colloidal Stability and Magnetic Field-Induced Ordering of Magnetorheological Fluids Studied with a Quartz Crystal Microbalance

    PubMed Central

    Rodriguez-López, Jaime; Castro, Pedro; de Vicente, Juan; Johannsmann, Diethelm; Elvira, Luis; Morillas, Jose R.; Montero de Espinosa, Francisco

    2015-01-01

    This work proposes the use of quartz crystal microbalances (QCMs) as a method to analyze and characterize magnetorheological (MR) fluids. QCM devices are sensitive to changes in mass, surface interactions, and viscoelastic properties of the medium contacting its surface. These features make the QCM suitable to study MR fluids and their response to variable environmental conditions. MR fluids change their structure and viscoelastic properties under the action of an external magnetic field, this change being determined by the particle volume fraction, the magnetic field strength, and the presence of thixotropic agents among other factors. In this work, the measurement of the resonance parameters (resonance frequency and dissipation factor) of a QCM are used to analyze the behavior of MR fluids in static conditions (that is, in the absence of external mechanical stresses). The influence of sedimentation under gravity and the application of magnetic fields on the shifts of resonance frequency and dissipation factor were measured and discussed in the frame of the coupled resonance produced by particles touching the QCM surface. Furthermore, the MR-fluid/QCM system has a great potential for the study of high-frequency contact mechanics because the translational and rotational stiffness of the link between the surface and the particles can be tuned by the magnetic field. PMID:26690152

  3. Synthesis, photocatalytic activity, and photogenerated hydroxyl radicals of monodisperse colloidal ZnO nanospheres

    NASA Astrophysics Data System (ADS)

    Yang, Chong; Li, Qingsong; Tang, Limei; Xin, Kun; Bai, Ailing; Yu, Yingmin

    2015-12-01

    In the present study, monodisperse colloidal zinc oxide (ZnO) nanospheres were successfully synthesized via a newly developed two-stage solution method followed by facile calcination at various temperatures. The effects of calcination temperature on the structure, morphology, and optical properties as well as the photocatalytic activity of the as-made ZnO samples were investigated systematically by Fourier transform infrared spectrometry, X-ray diffraction, field emission scanning electron microscopy, nitrogen adsorption/desorption isotherms, diffuse reflectance UV-visible spectroscopy (DRS), photoluminescence, and related photocatalytic activity tests. The thermal decomposition was analyzed by thermogravimetric analysis. The crystallinity was found to gradually increase with increasing calcination temperature, whereas the decrease in the Brunauer-Emmett-Teller specific surface area of the samples with calcination may be ascribed to the increased particle size. The DRS results provided clear evidence for the decrease in band gap energy of ZnO samples with an increase in calcination temperature. The photoluminescence spectra demonstrated the calcination-dependent emission features, especially the UV emission intensity. In particular, the ZnO product calcined at 400 °C exhibited the highest photocatalytic activity, degrading methylene blue by almost 99.1% in 70 min, which is ascribed to the large specific surface area and pore volume, high electron-hole pair separation efficient, and great redox potential of the obtained ZnO nanoparticles. In addition, the production of photogenerated hydroxyl radicals (•OH) was consistent with the methylene blue degradation efficiency over the as-made ZnO nanoparticles. Using isopropanol as a hydroxyl radical scavenger, •OH was determined to be the main active oxygen species in the photocatalytic process. A possible mechanism of photodegradation under UV light irradiation also is proposed.

  4. Theory of activated dynamics and glass transition of hard colloids in two dimensions.

    PubMed

    Zhang, Bo-kai; Li, Hui-shu; Tian, Wen-de; Chen, Kang; Ma, Yu-qiang

    2014-03-07

    The microscopic nonlinear Langevin equation theory is applied to study the localization and activated hopping of two-dimensional hard disks in the deeply supercooled and glass states. Quantitative comparisons of dynamic characteristic length scales, barrier, and their dependence on the reduced packing fraction are presented between hard-disk and hard-sphere suspensions. The dynamic barrier of hard disks emerges at higher absolute and reduced packing fractions and correspondingly, the crossover size of the dynamic cage which correlates to the Lindemann length for melting is smaller. The localization lengths of both hard disks and spheres decrease exponentially with packing fraction. Larger localization length of hard disks than that of hard spheres is found at the same reduced packing fraction. The relaxation time of hard disks rises dramatically above the reduced packing fraction of 0.88, which leads to lower reduced packing fraction at the kinetic glass transition than that of hard spheres. The present work provides a foundation for the subsequent study of the glass transition of binary or polydisperse mixtures of hard disks, normally adopted in experiments and simulations to avoid crystallization, and further, the rheology and mechanical response of the two-dimensional glassy colloidal systems.

  5. [Oral fluid bacteriocidal activity in complex diagnostics of oral disbiosis].

    PubMed

    Rabinovich, O F; Abramova, E S

    2012-01-01

    The possibility of examination of oral fluid bacteriocidal activity in complex diagnostics of oral mucosa disbiosis was evaluated. Thirty-seven patients were included in complex clinical and laboratory studies. The patients were divided in two groups: main group (30 patients exhibiting various grades of oral mucosa disbiosis) and control group (7 patients with no signs of oral disbiosis). The oral fluid bacteriocidal activity was examined by means of laser flow cytometry. Study results proved oral fluid bacteriocidal activity increase to correlate with the grade of oral mucosa disbiosis thus confirming the usefulness of the method in complex diagnostics of oral disbiosis.

  6. Active mixing of complex fluids at the microscale

    SciTech Connect

    Ober, Thomas J.; Foresti, Daniele; Lewis, Jennifer A.

    2015-09-22

    Mixing of complex fluids at low Reynolds number is fundamental for a broad range of applications, including materials assembly, microfluidics, and biomedical devices. Of these materials, yield stress fluids (and gels) pose the most significant challenges, especially when they must be mixed in low volumes over short timescales. New scaling relationships between mixer dimensions and operating conditions are derived and experimentally verified to create a framework for designing active microfluidic mixers that can efficiently homogenize a wide range of complex fluids. As a result, active mixing printheads are then designed and implemented for multimaterial 3D printing of viscoelastic inks with programmable control of local composition.

  7. Active mixing of complex fluids at the microscale

    DOE PAGES

    Ober, Thomas J.; Foresti, Daniele; Lewis, Jennifer A.

    2015-09-22

    Mixing of complex fluids at low Reynolds number is fundamental for a broad range of applications, including materials assembly, microfluidics, and biomedical devices. Of these materials, yield stress fluids (and gels) pose the most significant challenges, especially when they must be mixed in low volumes over short timescales. New scaling relationships between mixer dimensions and operating conditions are derived and experimentally verified to create a framework for designing active microfluidic mixers that can efficiently homogenize a wide range of complex fluids. As a result, active mixing printheads are then designed and implemented for multimaterial 3D printing of viscoelastic inks withmore » programmable control of local composition.« less

  8. Active mixing of complex fluids at the microscale

    PubMed Central

    Ober, Thomas J.; Foresti, Daniele; Lewis, Jennifer A.

    2015-01-01

    Mixing of complex fluids at low Reynolds number is fundamental for a broad range of applications, including materials assembly, microfluidics, and biomedical devices. Of these materials, yield stress fluids (and gels) pose the most significant challenges, especially when they must be mixed in low volumes over short timescales. New scaling relationships between mixer dimensions and operating conditions are derived and experimentally verified to create a framework for designing active microfluidic mixers that can efficiently homogenize a wide range of complex fluids. Active mixing printheads are then designed and implemented for multimaterial 3D printing of viscoelastic inks with programmable control of local composition. PMID:26396254

  9. Increased digitalis-like activity in human cerebrospinal fluid after expansion of the extracellular fluid volume

    SciTech Connect

    Halperin, J.A.; Martin, A.M.; Malave, S.

    1985-08-12

    The present study was designed to determine whether acute expansion of the extracellular fluid volume influenced the digitalis-like activity of human cerebrospinal fluid (CSF), previously described. Human CSF samples, drawn before and 30 minutes after the intravenous infusion of 1 liter of either saline or glucose solutions, were assayed for digitalis-like activity by inhibition of either the /sup 86/Rb/sup +/ uptake into human erythrocytes or by the activity of a purified Na/sup +/-K/sup +/ ATPase. The CSF inhibitory activity on both systems significantly increased after the infusion of sodium solutions but did not change after the infusion of glucose. These results indicate that the digitalis-like factor of human CSF might be involved in the regulation of the extracellular fluid volume and electrolyte content and thereby in some of the physiological responses to sodium loading. 31 references, 2 figures, 1 table.

  10. Glycerol etherification over highly active CaO-based materials: new mechanistic aspects and related colloidal particle formation.

    PubMed

    Ruppert, Agnieszka M; Meeldijk, Johannes D; Kuipers, Bonny W M; Erné, Ben H; Weckhuysen, Bert M

    2008-01-01

    Glycerol is an attractive renewable building block for the synthesis of di- and triglycerols, which have numerous applications in the cosmetic and pharmaceutical industries. In this work, the selective etherification of glycerol to di- and triglycerol was studied in the presence of alkaline earth metal oxides and the data are compared with those obtained with Na2CO3 as a homogeneous catalyst. It was found that glycerol conversion increased with increasing catalyst basicity; that is, the conversion increases in the order: MgO90 % at 60 % conversion) are obtained over CaO, SrO, and BaO. For these catalysts no substantial acrolein formation was observed. Furthermore, at the start of the reaction mainly linear diglycerol was produced, whereas at higher conversion degrees branched diglycerol started to form. In another series of experiments different types of CaO materials were prepared. It was found that these CaO-based materials not only differed in their surface area and number of basic sites, but also in their Lewis acid strength. Within this series the CaO material possessing the strongest Lewis acid sites had the highest catalytic activity, comparable to that of BaO, pointing towards the important role of Lewis acidity for this etherification reaction. Based on these observations a plausible alternative reaction scheme for glycerol etherification is presented, which considers the facilitation of the hydroxyl leaving process. Finally, the stability of the catalytic solids under study was investigated and it was found that colloidal CaO particles of about 50-100 nm can be spontaneously generated during reaction. Catalytic testing of these CaO colloids, after isolation from the reaction medium, revealed a very high etherification activity. Understanding the nature of these Ca-based colloids opens new opportunities for investigating supported colloidal particle catalysts to take advantage of both

  11. Encapsulation, protection, and release of hydrophilic active components: potential and limitations of colloidal delivery systems.

    PubMed

    McClements, David Julian

    2015-05-01

    There have been major advances in the development of edible colloidal delivery systems for hydrophobic bioactives in recent years. However, there are still many challenges associated with the development of effective delivery systems for hydrophilic bioactives. This review highlights the major challenges associated with developing colloidal delivery systems for hydrophilic bioactive components that can be utilized in foods, pharmaceuticals, and other products intended for oral ingestion. Special emphasis is given to the fundamental physicochemical phenomena associated with encapsulation, stabilization, and release of these bioactive components, such as solubility, partitioning, barriers, and mass transport processes. Delivery systems suitable for encapsulating hydrophilic bioactive components are then reviewed, including liposomes, multiple emulsions, solid fat particles, multiple emulsions, biopolymer particles, cubosomes, and biologically-derived systems. The advantages and limitations of each of these delivery systems are highlighted. This information should facilitate the rational selection of the most appropriate colloidal delivery systems for particular applications in the food and other industries.

  12. Instabilities, motion and deformation of active fluid droplets

    NASA Astrophysics Data System (ADS)

    Whitfield, Carl A.; Hawkins, Rhoda J.

    2016-12-01

    We consider two minimal models of active fluid droplets that exhibit complex dynamics including steady motion, deformation, rotation and oscillating motion. First we consider a droplet with a concentration of active contractile matter adsorbed to its boundary. We analytically predict activity driven instabilities in the concentration profile, and compare them to the dynamics we find from simulations. Secondly, we consider a droplet of active polar fluid of constant concentration. In this system we predict, motion and deformation of the droplets in certain activity ranges due to instabilities in the polarisation field. Both these systems show spontaneous transitions to motility and deformation which resemble dynamics of the cell cytoskeleton in animal cells.

  13. Opsonic activity of blister fluid from burn patients.

    PubMed Central

    Deitch, E A

    1983-01-01

    The combination of skin loss and immune depression after thermal injury predisposes burn patients to an increased risk of infection. Since the commonest site of infection in the burn patient is the burn wound itself, we elected to study the opsonic activity of locally produced blister fluid, from 18 thermally injured patients, for the two most common organisms colonizing the burn wound (Pseudomonas aeruginosa and Staphylococcus aureus). Blister fluid was as good an opsonin source for staphylococcus as normal serum. In contrast, the blister fluid did not support either the phagocytosis of the intracellular killing of P. aeruginosa. The poor opsonic activity of blister fluid for P. aeruginosa did not appear to be due to the presence of an inhibitory factor(s) since the addition of normal serum restored the opsonic activity of the blister fluid to normal. The concentrations of immunoglobulins and the complement components C3 and C4 in the blister fluid samples were less than half the level of those in normal serum. The opsonic activity of the blister fluid could not be restored to normal by the addition of either immunoglobulin or heat-inactivated serum (56 degrees C for 30 min). Thus, the opsonic factor(s) missing from the blister fluid was heat labile and thus probably represents complement components. That blister fluid had impaired opsonic activity for P. aeruginosa but not for S. aureus indicated that a local humoral defect may be responsible, at least in part, for the high incidence of gram-negative organisms, especially pseudomonads, colonizing the burn wound after thermal injury. PMID:6411619

  14. Active microrheology of fluids inside developing zebrafish

    NASA Astrophysics Data System (ADS)

    Taormina, Mike; Parthasarathy, Raghuveer

    2014-03-01

    Biological fluids are a source of diverse and interesting behavior for the soft matter physicist. Since their mechanical properties must be tuned to fulfill functional roles important to the development and health of living things, they often display complex behavior on length and time scales spanning many orders of magnitude. For microbes colonizing an animal host, for example, the mechanical properties of the host environment are of great importance, affecting mobility and hence the ability to establish a stable population. Indeed, some species possess the ability to affect the fluidity of their environment, both directly by chemically modifying it, and indirectly by influencing the host cells' secretion of mucus. Driving magnetically doped micron-scale probes which have been orally micro-gavaged into the intestinal bulb of a larval zebrafish allows the rheology of the mucosal layer within the fish to be measured over three decades of frequency, complementing ecological data on microbial colonization with physical information about the gut environment. Here, we describe the technique, provide the first measurement of mucosal viscosity in a developing animal, and explore the technique's applicability to other small-volume or spatially inhomogeneous fluid samples.

  15. Polarity inversion of ζ-potential in concentrated colloidal dispersions.

    PubMed

    Manzanilla-Granados, Héctor M; Jiménez-Ángeles, Felipe; Lozada-Cassou, Marcelo

    2011-10-27

    A concentrated colloidal dispersion is studied by applying an integral equations theory to the colloidal primitive model fluid. Important effects, attributed to large size and charge and to the finite concentration of colloidal particles, are found. We observe a polarity inversion of ζ-potential for concentrated colloidal dispersions, while it is not present for a single colloidal particle at infinite dilution. An excellent qualitative agreement between our theoretical predictions and our computer simulations is observed.

  16. Surface activity of Janus particles adsorbed at fluid-fluid interfaces: Theoretical and experimental aspects.

    PubMed

    Fernandez-Rodriguez, Miguel Angel; Rodriguez-Valverde, Miguel Angel; Cabrerizo-Vilchez, Miguel Angel; Hidalgo-Alvarez, Roque

    2016-07-01

    Since de Gennes coined in 1992 the term Janus particle (JP), there has been a continued effort to develop this field. The purpose of this review is to present the most relevant theoretical and experimental results obtained so far on the surface activity of amphiphilic JPs at fluid interfaces. The surface activity of JPs at fluid-fluid interfaces can be experimentally determined using two different methods: the classical Langmuir balance or the pendant drop tensiometry. The second method requires much less amount of sample than the first one, but it has also some experimental limitations. In all cases collected here the JPs exhibited a higher surface or interfacial activity than the corresponding homogeneous particles. This reveals the significant advantage of JPs for the stabilization of emulsions and foams.

  17. Self-Pinning by Colloids Confined at a Contact Line

    NASA Astrophysics Data System (ADS)

    Weon, Byung Mook; Je, Jung Ho

    2013-01-01

    Colloidal particles suspended in a fluid usually inhibit complete wetting of the fluid on a solid surface and cause pinning of the contact line, known as self-pinning. We show differences in spreading and drying behaviors of pure and colloidal droplets using optical and confocal imaging methods. These differences come from spreading inhibition by colloids confined at a contact line. We propose a self-pinning mechanism based on spreading inhibition by colloids. We find a good agreement between the mechanism and the experimental result taken by directly tracking individual colloids near the contact lines of evaporating colloidal droplets.

  18. Overview of MSFC's Applied Fluid Dynamics Analysis Group Activities

    NASA Technical Reports Server (NTRS)

    Garcia, Roberto; Wang, Tee-See; Griffin, Lisa; Turner, James E. (Technical Monitor)

    2001-01-01

    This document is a presentation graphic which reviews the activities of the Applied Fluid Dynamics Analysis Group at Marshall Space Flight Center (i.e., Code TD64). The work of this group focused on supporting the space transportation programs. The work of the group is in Computational Fluid Dynamic tool development. This development is driven by hardware design needs. The major applications for the design and analysis tools are: turbines, pumps, propulsion-to-airframe integration, and combustion devices.

  19. ACTIVATION OF HAGEMAN FACTOR IN SOLID AND FLUID PHASES

    PubMed Central

    Cochrane, C. G.; Revak, S. D.; Wuepper, K. D.

    1973-01-01

    The activation of Hageman factor in solid and fluid phase has been analyzed. Activation of highly purified Hageman factor occurred after it interacted with and became bound to a negatively charged surface. Activation was observed in the absence of enzymes that are inhibitable with diisopropylfluorophosphate, phenyl methyl sulfonyl fluoride and ε-amino-n-caproic acid. The binding of [125I]Hageman factor to the negatively charged surface was markedly inhibited by plasma or purified plasma proteins. Activation of Hageman factor in solution (fluid phase) was obtained with kallikrein, plasmin, and Factor XI (plasma thromboplastin antecedent). Kallikrein was greater than 10 times more active in its ability to activate Hageman factor than plasmin and Factor XI. The data offer a plausible explanation for the finding that highly purified kallikrein promotes clotting of normal plasma. In addition, the combined results of this and previously reported data from this laboratory indicate that the reciprocal activation of Hageman factor by kallikrein in fluid phase is essential for normal rate of activation of the intrinsic-clotting, kinin-forming, and fibrinolytic systems. Activation of Hageman factor was associated with three different structural changes in the molecule: (a) Purified Hageman factor, activated on negatively charged surfaces retained its native mol wt of 80–90,000. Presumably a conformational change accompanied activation. (b) In fluid phase, activation with kallikrein and plasmin did not result in cleavage of large fragments of rabbit Hageman factor, although the activation required hydrolytic capacity of the enzymes. (c) Activation of human Hageman factor with kallikrein or plasmin was associated with cleavage of the molecule to 52,000, 40,000, and 28,000 mol wt fragments. Activation of rabbit Hageman factor with trypsin resulted in cleavage of the molecule into three fragments, each of 30,000 mol wt as noted previously. This major cleavage occurred

  20. Active Learning in Fluid Mechanics: Youtube Tube Flow and Puzzling Fluids Questions

    ERIC Educational Resources Information Center

    Hrenya, Christine M.

    2011-01-01

    Active-learning exercises appropriate for a course in undergraduate fluid mechanics are presented. The first exercise involves an experiment in gravity-driven tube flow, with small groups of students partaking in a contest to predict the experimental flow rates using the mechanical energy balance. The second exercise takes the form of an…

  1. Structured superparamagnetic nanoparticles for high performance mediator of magnetic fluid hyperthermia: synthesis, colloidal stability and biocompatibility evaluation.

    PubMed

    Thorat, N D; Otari, S V; Bohara, R A; Yadav, H M; Khot, V M; Salunkhe, A B; Phadatare, M R; Prasad, A I; Ningthoujam, R S; Pawar, S H

    2014-09-01

    Core-shell structures with magnetic core and metal/polymer shell provide a new opportunity for constructing highly efficient mediator for magnetic fluid hyperthermia. Herein, a facile method is described for the synthesis of superparamagnetic LSMO@Pluronic F127 core-shell nanoparticles. Initially, the surface of the LSMO nanoparticles is functionalized with oleic acid and the polymeric shell formation is achieved through hydrophobic interactions with oleic acid. Each step is optimized to get good dispersion and less aggregation. This methodology results into core-shell formation, of average diameter less than 40 nm, which was stable under physiological conditions. After making a core-shell formulation, a significant increase of specific absorption rate (up to 300%) has been achieved with variation of the magnetization (<20%). Furthermore, this high heating capacity can be maintained in various simulated physiological conditions. The observed specific absorption rate is almost higher than Fe3O4. MTT assay is used to evaluate the toxicity of bare and core-shell MNPs. The mechanism of cell death by necrosis and apoptosis is studied with sequential staining of acridine orange and ethidium bromide using fluorescence and confocal microscopy. The present work reports a facile method for the synthesis of core-shell structure which significantly improves SAR and biocompatibility of bare LSMO MNPs, indicating potential application for hyperthermia.

  2. Edge states in confined active fluids

    NASA Astrophysics Data System (ADS)

    Souslov, Anton; Vitelli, Vincenzo

    Recently, topologically protected edge modes have been proposed and realized in both mechanical and acoustic metamaterials. In one class of such metamaterials, Time-Reversal Symmetry is broken, and, to achieve this TRS breaking in mechanical and acoustic systems, an external energy input must be used. For example, motors provide a driving force that uses energy and, thus, explicitly break TRS. As a result, motors have been used as an essential component in the design of topological metamaterials. By contrast, we explore the design of topological metamaterials that use a class of far-from-equilibrium liquids, called polar active liquids, that spontaneously break TRS. We thus envision the confinement of a polar active liquid to a prescribed geometry in order to realize topological order with broken time-reversal symmetry. We address the design of the requisite geometries, for example a regular honeycomb lattice composed of annular channels, in which the active liquid may be confined. We also consider the physical character of the active liquid that, when introduced into the prescribed geometry, will spontaneously form the flow pattern of a metamaterial with topologically protected edge states. Finally, we comment on potential experimental realizations of such metamaterials.

  3. Colloidal polypyrrole

    DOEpatents

    Armes, Steven P.; Aldissi, Mahmoud

    1990-01-01

    Processable electrically conductive latex polymer compositions including colloidal particles of an oxidized, polymerized aromatic heterocyclic monomer, a stabilizing effective amount of a vinyl pyridine-containing polymer and dopant anions and a method of preparing such polymer compositions are disclosed.

  4. Colloid-based multiplexed method for screening plant biomass-degrading glycoside hydrolase activities in microbial communities

    SciTech Connect

    Reindl, W.; Deng, K.; Gladden, J.M.; Cheng, G.; Wong, A.; Singer, S.W.; Singh, S.; Lee, J.-C.; Yao, J.-S.; Hazen, T.C.; Singh, A.K; Simmons, B.A.; Adams, P.D.; Northen, T.R.

    2011-05-01

    The enzymatic hydrolysis of long-chain polysaccharides is a crucial step in the conversion of biomass to lignocellulosic biofuels. The identification and characterization of optimal glycoside hydrolases is dependent on enzyme activity assays, however existing methods are limited in terms of compatibility with a broad range of reaction conditions, sample complexity, and especially multiplexity. The method we present is a multiplexed approach based on Nanostructure-Initiator Mass Spectrometry (NIMS) that allowed studying several glycolytic activities in parallel under diverse assay conditions. Although the substrate analogs carried a highly hydrophobic perfluorinated tag, assays could be performed in aqueous solutions due colloid formation of the substrate molecules. We first validated our method by analyzing known {beta}-glucosidase and {beta}-xylosidase activities in single and parallel assay setups, followed by the identification and characterization of yet unknown glycoside hydrolase activities in microbial communities.

  5. [Preliminary study of colloid osmotic pressure for cardiopulmonary bypass].

    PubMed

    Wang, D; Xiang, L; Luo, J

    1996-12-01

    The ideal colloid osmotic pressure is beneficial to decrease the fluid accumulated in the pulmonary and other tissue during cardiopulmonary bypass. Schupbach reported the proper colloidosmotic pressure for cardiopulmonary bypass was 2.1 kPa (16 mmHg). Colloid osmotic pressures of blood and priming fluid during cardiopulmonary bypass were measured in 28 patients with heart disease by using colloid osmotic pressure detection apparatus. The value of colloid osmotic pressure suitable for the designed standard was apparently different among the Gelofusine group and other groups. P value was 0.005. Priming fluid for cardiopulmonary bypass needs to satisfy the quality and the quantity of colloid osmotic pressure. Using Albumin isn't economical. Whole blood and plazma are not suitable for increasing colloid osmotic pressure. Hydroxyethyl starch or Gelofusine is best choice in priming to get designed standard of colloid osmotic pressure. The ratio of hydroxyethyl starch or Gelofusine in priming fluid should beyond 1/2.

  6. Study of the surface-enhanced Raman spectroscopy of residual impurities in hydroxylamine-reduced silver colloid and the effects of anions on the colloid activity.

    PubMed

    Dong, Xiao; Gu, Huaimin; Liu, Fangfang

    2012-03-01

    The paper investigated the residual ions in hydroxylamine-reduced silver colloid (HRSC) and the relationship between the condition of HRSC and the enhanced mechanisms of this colloid. We also detected the SERS of MB and studied the effects of anions on the Raman signal. In the case of HRSC, the bands of residual ions diminish while the bands of Ag-anions increase gradually with increasing the concentrations of Cl(-) and NO(3)(-). It means the affinity of residual ions on the silver surface is weaker than that of Cl(-) and NO(3)(-) and the residual ions are replaced gradually by the added Cl(-) or NO(3)(-). The Raman signal of residual ions can be detected by treatment with anions that do not bind strongly to the silver surface, such as SO(4)(2-). The most intense band of Ag-anions bonds can be also observed when adding weakly binding anions to the colloid. However, the anions which make up the Ag-anions bonds are residual Cl(-) and the effect of weakly binding anions is only to aggregate the silver particles. Residual Cl(-) can be replaced by I(-) which has the highest affinity. From the detection of methylene blue (MB), the effects of anions on the enhancement of Raman signal are discussed in detail, and these findings could make the conditions suitable for detecting analytes in high efficiency. This study will have a profound implication to SERS users about their interpretation of SERS spectra when obtaining these anomalous bands.

  7. Electrorheological fluids

    SciTech Connect

    Adolf, D.; Anderson, R.; Garino, T.; Halsey, T.C.; Hance, B.; Martin, J.E.; Odinek, J.

    1996-10-01

    An Electrorheological fluid is normally a low-viscosity colloidal suspension, but when an electric field is applied, the fluid undergoes a reversible transition to a solid, being able to support considerable stress without yield. Commercial possibilities for such fluids are enormous, including clutches, brakes, valves,shock absorbers, and stepper motors. However, performance of current fluids is inadequate for many proposed applications. Our goal was to engineer improved fluids by investigating the key technical issues underlying the solid-phase yield stress and the liquid to solid switching time. Our studies focused on field-induced interactions between colloidal particles that lead to solidification, the relation between fluid structure and performance (viscosity, yield stress), and the time evolution of structure in the fluid as the field is switched on or off.

  8. Assessing Microbial Activity in Marcellus Shale Hydraulic Fracturing Fluids

    NASA Astrophysics Data System (ADS)

    Wishart, J. R.; Morono, Y.; Itoh, M.; Ijiri, A.; Hoshino, T.; Inagaki, F.; Verba, C.; Torres, M. E.; Colwell, F. S.

    2014-12-01

    Hydraulic fracturing (HF) produces millions of gallons of waste fluid which contains a microbial community adapted to harsh conditions such as high temperatures, high salinities and the presence of heavy metals and radionuclides. Here we present evidence for microbial activity in HF production fluids. Fluids collected from a Marcellus shale HF well were supplemented with 13C-labeled carbon sources and 15N-labeled ammonium at 25°C under aerobic or anaerobic conditions. Samples were analyzed for 13C and 15N incorporation at sub-micrometer scale by ion imaging with the JAMSTEC NanoSIMS to determine percent carbon and nitrogen assimilation in individual cells. Headspace CO2 and CH4 were analyzed for 13C enrichment using irm-GC/MS. At 32 days incubation carbon assimilation was observed in samples containing 1 mM 13C-labeled glucose under aerobic and anaerobic conditions with a maximum of 10.4 and 6.5% total carbon, respectively. Nitrogen assimilation of 15N ammonium observed in these samples were 0.3 and 0.8% of total nitrogen, respectively. Head space gas analysis showed 13C enrichment in CH4 in anaerobic samples incubated with 1mM 13C-labeled bicarbonate (2227 ‰) or methanol (98943 ‰). Lesser 13C enrichment of CO2 was observed in anaerobic samples containing 1 mM 13C-labeled acetate (13.7 ‰), methanol (29.9 ‰) or glucose (85.4 ‰). These results indicate metabolic activity and diversity in microbial communities present in HF flowback fluids. The assimilation of 13C-labeled glucose demonstrates the production of biomass, a critical part of cell replication. The production of 13CO2 and 13CH4 demonstrate microbial metabolism in the forms of respiration and methanogenesis, respectively. Methanogenesis additionally indicates the presence of an active archaeal community. This research shows that HF production fluid chemistry does not entirely inhibit microbial activity or growth and encourages further research regarding biogeochemical processes occurring in

  9. Colloidal polyaniline

    DOEpatents

    Armes, Steven P.; Aldissi, Mahmoud

    1990-01-01

    Processable electrically conductive latex polymer compositions including colloidal particles of an oxidized, polymerized amino-substituted aromatic monomer, a stabilizing effective amount of a random copolymer containing amino-benzene type moieties as side chain constituents, and dopant anions, and a method of preparing such polymer compositions are provided.

  10. SERS active colloidal nanoparticles for the detection of small blood biomarkers using aptamers

    NASA Astrophysics Data System (ADS)

    Marks, Haley; Mabbott, Samuel; Jackson, George W.; Graham, Duncan; Cote, Gerard L.

    2015-03-01

    Functionalized colloidal nanoparticles for SERS serve as a promising multifunctional assay component for blood biomarker detection. Proper design of these nanoprobes through conjugation to spectral tags, protective polymers, and sensing ligands can provide experimental control over the sensitivity, range, reproducibility, particle stability, and integration with biorecognition assays. Additionally, the optical properties and degree of electromagnetic SERS signal enhancement can be altered and monitored through tuning the nanoparticle shape, size, material and the colloid's local surface plasmon resonance (LSPR). Aptamers, synthetic affinity ligands derived from nucleic acids, provide a number of advantages for biorecognition of small molecules and toxins with low immunogenicity. DNA aptamers are simpler and more economical to produce at large scale, are capable of greater specificity and affinity than antibodies, are easily tailored to specific functional groups, can be used to tune inter-particle distance and shift the LSPR, and their intrinsic negative charge can be utilized for additional particle stability.1,2 Herein, a "turn-off" competitive binding assay platform involving two different plasmonic nanoparticles for the detection of the toxin bisphenol A (BPA) using SERS is presented. A derivative of the toxin is immobilized onto a silver coated magnetic nanoparticle (Ag@MNP), and a second solid silver nanoparticle (AgNP) is functionalized with the BPA aptamer and a Raman reporter molecule (RRM). The capture (Ag@MNP) and probe (AgNP) particles are mixed and the aptamer binding interaction draws the nanoparticles closer together, forming an assembly that results in an increased SERS signal intensity. This aptamer mediated assembly of the two nanoparticles results in a 100x enhancement of the SERS signal intensity from the RRM. These pre-bound aptamer/nanoparticle conjugates were then exposed to BPA in free solution and the competitive binding event was monitored

  11. Magnetorheological effect in a suspension with an active carrier fluid

    SciTech Connect

    Kashevskii, B.E.; Kordonskii, V.I.; Prokhorov, I.V.

    1988-07-01

    The main quantitative laws governing the magnetorheological effect in a magnetorheological suspension with an active carrier liquid were established. The family of flow curves obtained for several samples of suspensions of one type of nonmagnetic particle was analyzed. Particles were suspended in a magnetic fluid of the magnetite-kerosite type. The main goal was to establish the law governing rheological similarity by generalizing experimental data with a universal relation while employing a small amount of initial data on the system. The data included the law of magnetization of the magnetic carrier fluid, the law of change in its viscosity in the field, and the law of change in the viscosity of the magnetorheological suspension/active carrier liquid system with an increase in the concentration of nonmagnetic particles in a zero field.

  12. Peptic ulcer perforation: sonographic imaging of active fluid leakage.

    PubMed

    Minardos, Ioannis; Ioannis, Minardos; Ziogana, Dimitra; Dimitra, Ziogana; Hristopoulos, Hristos; Hristos, Hristopoulos; Dermitzakis, Ioannis; Ioannis, Dermitzakis

    2006-01-01

    Sonography is not the method of choice for the evaluation of suspected peptic ulcer perforation (PUP). However, indirect sonographic signs and direct visualization of PUP have been reported by several authors in recent years. We report a case of an elderly woman who presented with severe abdominal pain and positive rebound sign, in whom abdominal sonography demonstrated indirect signs of PUP, the site of perforation, and active air fluid leakage through the perforated anterior prepyloric antral wall.

  13. Enabling Novel Minimally-Actuated Robotic Capabilities Through Active Fluids

    DTIC Science & Technology

    2013-07-25

    journals : 1. Ahmed Helal. Society of Rheology Meeting, Feb 2013, "Design of Integrated ER valves" 2. Boston Dynamics Active Fluids Program: IEEE RAS...adhesive climbers. (a) Papers published in peer-reviewed journals (N/A for none) Enter List of papers submitted or published that acknowledge ARO support...from the start of the project to the date of this printing. List the papers, including journal references, in the following categories: Received

  14. Binary Colloidal Alloy Test Conducted on Mir

    NASA Technical Reports Server (NTRS)

    Hoffmann, Monica I.; Ansari, Rafat R.

    1999-01-01

    Colloids are tiny (submicron) particles suspended in fluid. Paint, ink, and milk are examples of colloids found in everyday life. The Binary Colloidal Alloy Test (BCAT) is part of an extensive series of experiments planned to investigate the fundamental properties of colloids so that scientists can make colloids more useful for technological applications. Some of the colloids studied in BCAT are made of two different sized particles (binary colloidal alloys) that are very tiny, uniform plastic spheres. Under the proper conditions, these colloids can arrange themselves in a pattern to form crystals. These crystals may form the basis of new classes of light switches, displays, and optical devices. Windows made of liquid crystals are already in the marketplace. These windows change their appearance from transparent to opaque when a weak electric current is applied. In the future, if the colloidal crystals can be made to control the passage of light through them, such products could be made much more cheaply. These experiments require the microgravity environment of space because good quality crystals are difficult to produce on Earth because of sedimentation and convection in the fluid. The BCAT experiment hardware included two separate modules for two different experiments. The "Slow Growth" hardware consisted of a 35-mm camera with a 250- exposure photo film cartridge. The camera was aimed toward the sample module, which contained 10 separate colloid samples. A rack of small lights provided backlighting for the photographs. The BCAT hardware was launched on the shuttle and was operated aboard the Russian space station Mir by American astronauts John Blaha and David Wolf (launched September 1996 and returned January 1997; reflown September 1997 and returned January 1998). To begin the experiment, one of these astronauts would mix the samples to disperse the colloidal particles and break up any crystals that might have already formed. Once the samples were mixed and

  15. Gold and silver nanoparticle monomers are non-SERS-active: a negative experimental study with silica-encapsulated Raman-reporter-coated metal colloids.

    PubMed

    Zhang, Yuying; Walkenfort, Bernd; Yoon, Jun Hee; Schlücker, Sebastian; Xie, Wei

    2015-09-07

    Noble metal nanoparticles (NPs) are the most commonly employed plasmonic substrates in surface-enhanced Raman scattering (SERS) experiments. Computer simulations show that monomers of Ag and Au nanocrystals ("spherical" NPs) do not exhibit a notable plasmonic enhancement, i.e., they are essentially non-SERS-active. However, in experiments, SERS enhanced by spherical NP colloids has been frequently reported. This implies that the monomers do not have strong SERS activity, but detectable enhancement should more or less be there. Because of the gap between theory and practice, it is important to demonstrate experimentally how SERS-active the metal colloid actually is and, in case a SERS signal is observed, where it originates from. In particular the aggregation of the colloid, induced by high centrifugal forces in washing steps or due to a harsh ionic environment of the suspension medium, should be controlled since it is the very high SERS activity of NP clusters which dominates the overall SERS signal of the colloid. We report here the experimental evaluation of the SERS activity of 80 nm Au and Ag NP monomers. Instead of showing fancy nanostructures and super SERS enhancement, we present the method on how to obtain negative experimental data. In this approach, no SERS signal was obtained from the colloid with a Raman reporter on the metal surface when the NPs were encapsulated carefully within a thick silica shell. Without silica encapsulation, if a very low centrifugation speed is used for the washing steps, only a negligible SERS signal can be detected even at very high NP concentrations. In contrast, strong SERS signals can be detected when the NPs are suspended in acidic solutions. These results indicate that Au and Ag NP monomers essentially exhibit no SERS activity of practical relevance.

  16. Alpha-mannosidase activity in stallion epididymal fluid and spermatozoa.

    PubMed

    Retamal, C A; Dias, A J B; Brasil, F C; Lanzana, F R; López, M L

    2012-07-15

    The expression of α-D-mannosidase activity was fluorometrically and electrophoretically assessed in spermatozoa, epididymal fluid and homogenates of stallion epididymal tissue. Enzyme activity had regional differences; it was higher (P<0.05) in samples from the cauda epididymal region than in samples from the proximal caput region (largely composed of efferent ducts). Based on enzyme activity, as a function of pH of the assay substrate, electrophoretic analysis in native and native/SDS-PAGE conditions, and the effect of inhibitors or activators, we inferred the presence of at least two catalytically active forms of α-D-mannosidase. The neutral form of the enzyme (α-mannosidase II) was activated by Co2+, whereas the acid form (optimum pH 3.5 to 4.0) was sensitive to swainsonine (an inhibitor of α-mannosidase I), stabilized or stimulated by Zn2+, and not activated by Co2+ (activator of the neutral form). The activity of the acid form of the enzyme was highest in the epididymal fluid, where it seemed to be mainly in a secretory form. This form of the enzyme may have a role in plasma membrane remodeling associated with sperm maturation. In contrast, the activity of α-mannosidase II was higher in mature spermatozoa. It has been postulated that α-mannosidase II may act as a receptor in the recognition and binding of the complementary carbohydrate moieties present on the zona pellucida. With non-denaturing electrophoresis, α-D-mannosidase had an electrophoretic mobility of 0.35 and 0.24. When resolved by 1D and 2D SDS-PAGE (under denaturing conditions) the enzyme had a major protein band of molecular weight 154 kDa in spermatozoa and epididymal samples. Based on its properties under native conditions, we inferred that this enzyme might interact with other proteins and form transitory aggregates.

  17. In situ electrochemical activation of Ni-based colloids from an NiCl2 electrode and their advanced energy storage performance.

    PubMed

    Chen, Kunfeng; Xue, Dongfeng

    2016-10-06

    The formation of electrochemical activated cations in electrode materials to induce multiple-electron transfer reactions is a challenge for high-energy storage systems. Herein, highly electroactive Ni-based colloidal electrode materials have been synthesized by in situ electrochemical activation of a NiCl2 electrode. The highest specific capacitance of the activated Ni-based electrodes was 10 286 F g(-1) at a current density of 3 A g(-1), indicating that a three-electron Faradaic redox reaction (Ni(3+) ↔ Ni) occurred. Upon potential cycling and constant potential activation, a decrease in the charge transfer resistance can be found. Activation and utilization of multiple-electron reactions is an efficient route to increase the energy density of supercapacitors. This newly designed colloidal pseudocapacitor is compatible with inorganic pseudocapacitor chemistry, which enables us to use metal cations directly via their commercial salts rather than their oxide/hydroxide compounds.

  18. Spontaneous and specific activation of chemical bonds in macromolecular fluids.

    PubMed

    Park, Insun; Shirvanyants, David; Nese, Alper; Matyjaszewski, Krzysztof; Rubinstein, Michael; Sheiko, Sergei S

    2010-09-08

    Mechanical activation of chemical bonds typically involves the application of external forces, which implies a broad distribution of bond tensions. We demonstrate that controlling the flow profile of a macromolecular fluid generates and delineates mechanical force concentration, enabling a hierarchical activation of chemical bonds on different length scales from the macroscopic to the molecular. Bond tension is spontaneously generated within brushlike macromolecules as they spread on a solid substrate. The molecular architecture creates an uneven distribution of tension in the covalent bonds, leading to spatially controlled bond scission. By controlling the flow rate and the gradient of the film pressure, one can sever the flowing macromolecules with high precision. Specific chemical bonds are activated within distinct macromolecules located in a defined area of a thin film. Furthermore, the flow-controlled loading rate enables quantitative analysis of the bond activation parameters.

  19. Colloidal titania-silica-iron oxide nanocomposites and the effect from silica thickness on the photocatalytic and bactericidal activities

    NASA Astrophysics Data System (ADS)

    Chanhom, Padtaraporn; Charoenlap, Nisanart; Tomapatanaget, Boosayarat; Insin, Numpon

    2017-04-01

    New types of colloidal multifunctional nanocomposites that combine superparamagnetic character and high photocatalytic activity were synthesized and investigated. The superparamagnetic nanocomposites composed of anatase titania, silica, and iron oxide nanoparticles (TSI) were synthesized using thermal decomposition method followed by microemulsion method, without calcination at high temperature. Different techniques including X-ray diffraction (XRD) and transmission electron microscope (TEM) were used to characterize and confirm the structure of the nanocomposites. These nanocomposites showed high photocatalytic activity when used in the photodegradation of methylene blue under irradiation with a black light lamp. Moreover, the nanocomposites exhibited high antibacterial properties. From our study, the nanocomposites can be useful in various applications such as removal of pollutants with readily separation from the environment using an external magnetic field. These composites could effectively photo-degrade the dye at least three cycles without regeneration. The effects of silica shell thickness on the photocatalytic activity was investigated, and the thickness of 6 nm of the silica interlayer is enough for the inhibition of electron translocation between titania and iron oxide nanoparticles and maintaining the efficiency of photocatalytic activity of titania nanoparticles.

  20. Brownian diffusion of a partially wetted colloid

    NASA Astrophysics Data System (ADS)

    Boniello, Giuseppe; Blanc, Christophe; Fedorenko, Denys; Medfai, Mayssa; Mbarek, Nadia Ben; in, Martin; Gross, Michel; Stocco, Antonio; Nobili, Maurizio

    2015-09-01

    The dynamics of colloidal particles at interfaces between two fluids plays a central role in microrheology, encapsulation, emulsification, biofilm formation, water remediation and the interface-driven assembly of materials. Common intuition corroborated by hydrodynamic theories suggests that such dynamics is governed by a viscous force lower than that observed in the more viscous fluid. Here, we show experimentally that a particle straddling an air/water interface feels a large viscous drag that is unexpectedly larger than that measured in the bulk. We suggest that such a result arises from thermally activated fluctuations of the interface at the solid/air/liquid triple line and their coupling to the particle drag through the fluctuation-dissipation theorem. Our findings should inform approaches for improved control of the kinetically driven assembly of anisotropic particles with a large triple-line-length/particle-size ratio, and help to understand the formation and structure of such arrested materials.

  1. Biaxial ferromagnetic liquid crystal colloids

    PubMed Central

    Liu, Qingkun; Ackerman, Paul J.; Lubensky, Tom C.; Smalyukh, Ivan I.

    2016-01-01

    The design and practical realization of composite materials that combine fluidity and different forms of ordering at the mesoscopic scale are among the grand fundamental science challenges. These composites also hold a great potential for technological applications, ranging from information displays to metamaterials. Here we introduce a fluid with coexisting polar and biaxial ordering of organic molecular and magnetic colloidal building blocks exhibiting the lowest symmetry orientational order. Guided by interactions at different length scales, rod-like organic molecules of this fluid spontaneously orient along a direction dubbed “director,” whereas magnetic colloidal nanoplates order with their dipole moments parallel to each other but pointing at an angle to the director, yielding macroscopic magnetization at no external fields. Facile magnetic switching of such fluids is consistent with predictions of a model based on competing actions of elastic and magnetic torques, enabling previously inaccessible control of light. PMID:27601668

  2. Soil colloidal behavior

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Recent understanding that organic and inorganic contaminants are often transported via colloidal particles has increased interest in colloid science. The primary importance of colloids in soil science stems from their surface reactivity and charge characteristics. Characterizations of size, shape,...

  3. Light-structured colloidal assemblies

    NASA Astrophysics Data System (ADS)

    Aubret, Antoine; Mena, Youssef; Ramananarivo, Sophie; Sacanna, Stefano; Palacci, Jeremie; Palacci lab Team; Sacanna lab Team

    2016-11-01

    Self-propelled particles (SPP) are a key tool since they are of relative simplicity as compared to biological micro-entities and provide a higher level of control. They can convert an energy source into motion and work, and exhibit surprising non-equilibrium behavior. In our work, we focus on the manipulation of colloids using light. We exploit osmotic and phoretic effects to act on single and ensemble of colloids. The key mechanism relies on the photocatalytic decomposition of hydrogen peroxide using hematite, which triggers the motion of colloids around it when illuminated. We use hematite particles and particles with photocatalytic inclusions (i.e. SPP). We first show that the interactions between hematite and colloidal tracers can be tuned by adjusting the chemical environment. Furthermore, we report a phototaxic behavior (migration in light gradient) of the particles. From this, we explore the effect of spatio-temporal modulation of the light to control the motion of colloids at the single particle level, and to generate self-assembled colloidal structures through time and space. The so-formed structures are maintained by phoretic and hydrodynamic forces resulting from the motion of each particles. Ultimately, a dynamic light modulation may be a route for the creation of active colloidal motion on a collective scale through the synchronization of the individual motions of SPP. This work is supported by NSF CAREER DMR 1554724.

  4. Reliable activation to novel stimuli predicts higher fluid intelligence.

    PubMed

    Euler, Matthew J; Weisend, Michael P; Jung, Rex E; Thoma, Robert J; Yeo, Ronald A

    2015-07-01

    The ability to reliably respond to stimuli could be an important biological determinant of differences in fluid intelligence (Gf). However, most electrophysiological studies of Gf employ event-related potential (ERP) measures that average brain activity over trials, and hence have limited power to quantify neural variability. Time-frequency analyses can capture cross-trial variation in the phase of neural activity, and thus can help address the importance of neural reliability to differences in Gf. This study recruited a community sample of healthy adults and measured inter-trial phase clustering (ITPC), total spectral power, and ERP amplitudes elicited by Repeated and Novel non-target stimuli during two visual oddball tasks. Condition effects, relations among the EEG measures, and relations with Gf were assessed. Early visual responses to Repeated stimuli elicited higher ITPC, yet only ITPC elicited by Novel stimuli was associated with Gf. Analyses of spectral power further highlighted the contribution of phase consistency to the findings. The link between Gf and reliable responding to changing inputs suggests an important role for flexible resource allocation in fluid intellectual skills.

  5. Effective SERS-active substrates composed of hierarchical micro/nanostructured arrays based on reactive ion etching and colloidal masks

    NASA Astrophysics Data System (ADS)

    Zhang, Honghua; Liu, Dilong; Hang, Lifeng; Li, Xinyang; Liu, Guangqiang; Cai, Weiping; Li, Yue

    2016-09-01

    A facile route has been proposed for the fabrication of morphology-controlled periodic SiO2 hierarchical micro/nanostructured arrays by reactive ion etching (RIE) using monolayer colloidal crystals as masks. By effectively controlling the experimental conditions of RIE, the morphology of a periodic SiO2 hierarchical micro/nanostructured array could be tuned from a dome-shaped one to a circular truncated cone, and finally to a circular cone. After coating a silver thin layer, these periodic micro/nanostructured arrays were used as surface-enhanced Raman scattering (SERS)-active substrates and demonstrated obvious SERS signals of 4-Aminothiophenol (4-ATP). In addition, the circular cone arrays displayed better SERS enhancement than those of the dome-shaped and circular truncated cone arrays due to the rougher surface caused by physical bombardment. After optimization of the circular cone arrays with different periodicities, an array with the periodicity of 350 nm exhibits much stronger SERS enhancement and possesses a low detection limit of 10-10 M 4-ATP. This offers a practical platform to conveniently prepare SERS-active substrates.

  6. Prolonged effect of fluid flow stress on the proliferative activity of mesothelial cells after abrupt discontinuation of fluid streaming

    SciTech Connect

    Aoki, Shigehisa; Ikeda, Satoshi; Takezawa, Toshiaki; Kishi, Tomoya; Makino, Junichi; Uchihashi, Kazuyoshi; Matsunobu, Aki; Noguchi, Mitsuru; Sugihara, Hajime; Toda, Shuji

    2011-12-16

    Highlights: Black-Right-Pointing-Pointer Late-onset peritoneal fibrosis leading to EPS remains to be elucidated. Black-Right-Pointing-Pointer Fluid streaming is a potent factor for peritoneal fibrosis in PD. Black-Right-Pointing-Pointer We focused on the prolonged effect of fluid streaming on mesothelial cell kinetics. Black-Right-Pointing-Pointer A history of fluid streaming exposure promoted mesothelial proliferative activity. Black-Right-Pointing-Pointer We have thus identified a potent new factor for late-onset peritoneal fibrosis. -- Abstract: Encapsulating peritoneal sclerosis (EPS) often develops after transfer to hemodialysis and transplantation. Both termination of peritoneal dialysis (PD) and transplantation-related factors are risks implicated in post-PD development of EPS, but the precise mechanism of this late-onset peritoneal fibrosis remains to be elucidated. We previously demonstrated that fluid flow stress induced mesothelial proliferation and epithelial-mesenchymal transition via mitogen-activated protein kinase (MAPK) signaling. Therefore, we speculated that the prolonged bioactive effect of fluid flow stress may affect mesothelial cell kinetics after cessation of fluid streaming. To investigate how long mesothelial cells stay under the bioactive effect brought on by fluid flow stress after removal of the stress, we initially cultured mesothelial cells under fluid flow stress and then cultured the cells under static conditions. Mesothelial cells exposed to fluid flow stress for a certain time showed significantly high proliferative activity compared with static conditions after stoppage of fluid streaming. The expression levels of protein phosphatase 2A, which dephosphorylates MAPK, in mesothelial cells changed with time and showed a biphasic pattern that was dependent on the duration of exposure to fluid flow stress. There were no differences in the fluid flow stress-related bioactive effects on mesothelial cells once a certain time had passed

  7. Young asteroidal fluid activity revealed by absolute age from apatite in carbonaceous chondrite.

    PubMed

    Zhang, Ai-Cheng; Li, Qiu-Li; Yurimoto, Hisayoshi; Sakamoto, Naoya; Li, Xian-Hua; Hu, Sen; Lin, Yang-Ting; Wang, Ru-Cheng

    2016-09-29

    Chondritic meteorites, consisting of the materials that have formed in the early solar system (ESS), have been affected by late thermal events and fluid activity to various degrees. Determining the timing of fluid activity in ESS is of fundamental importance for understanding the nature, formation, evolution and significance of fluid activity in ESS. Previous investigations have determined the relative ages of fluid activity with short-lived isotope systematics. Here we report an absolute (207)Pb/(206)Pb isochron age (4,450±50 Ma) of apatite from Dar al Gani (DaG) 978, a type ∼3.5, ungrouped carbonaceous chondrite. The petrographic, mineralogical and geochemical features suggest that the apatite in DaG 978 should have formed during metamorphism in the presence of a fluid. Therefore, the apatite age represents an absolute age for fluid activity in an asteroidal setting. An impact event could have provided the heat to activate this young fluid activity in ESS.

  8. Young asteroidal fluid activity revealed by absolute age from apatite in carbonaceous chondrite

    NASA Astrophysics Data System (ADS)

    Zhang, Ai-Cheng; Li, Qiu-Li; Yurimoto, Hisayoshi; Sakamoto, Naoya; Li, Xian-Hua; Hu, Sen; Lin, Yang-Ting; Wang, Ru-Cheng

    2016-09-01

    Chondritic meteorites, consisting of the materials that have formed in the early solar system (ESS), have been affected by late thermal events and fluid activity to various degrees. Determining the timing of fluid activity in ESS is of fundamental importance for understanding the nature, formation, evolution and significance of fluid activity in ESS. Previous investigations have determined the relative ages of fluid activity with short-lived isotope systematics. Here we report an absolute 207Pb/206Pb isochron age (4,450+/-50 Ma) of apatite from Dar al Gani (DaG) 978, a type ~3.5, ungrouped carbonaceous chondrite. The petrographic, mineralogical and geochemical features suggest that the apatite in DaG 978 should have formed during metamorphism in the presence of a fluid. Therefore, the apatite age represents an absolute age for fluid activity in an asteroidal setting. An impact event could have provided the heat to activate this young fluid activity in ESS.

  9. Colloid Transport in Saturated Porous Media: Elimination of Attachment Efficiency in a New Colloid Transport Model

    SciTech Connect

    Landkamer, Lee L.; Harvey, Ronald W.; Scheibe, Timothy D.; Ryan, Joseph N.

    2013-05-11

    A new colloid transport model is introduced that is conceptually simple but captures the essential features of complicated attachment and detachment behavior of colloids when conditions of secondary minimum attachment exist. This model eliminates the empirical concept of collision efficiency; the attachment rate is computed directly from colloid filtration theory. Also, a new paradigm for colloid detachment based on colloid population heterogeneity is introduced. Assuming the dispersion coefficient can be estimated from tracer behavior, this model has only two fitting parameters: (1) the fraction of colloids that attach irreversibly and (2) the rate at which reversibly attached colloids leave the surface. These two parameters were correlated to physical parameters that control colloid transport such as the depth of the secondary minimum and pore water velocity. Given this correlation, the model serves as a heuristic tool for exploring the influence of physical parameters such as surface potential and fluid velocity on colloid transport. This model can be extended to heterogeneous systems characterized by both primary and secondary minimum deposition by simply increasing the fraction of colloids that attach irreversibly.

  10. Fluid diversion and sweep improvement with chemical gels in oil recovery processes. [Four types of gels: resorcinol-formaldehyde; colloidal silica; Cr sup 3+ (chloride)-xanthan; and Cr sup 3+ (acetate)-polyacrylamide

    SciTech Connect

    Seright, R.S.; Martin, F.D.

    1992-09-01

    The objectives of this project were to identify the mechanisms by which gel treatments divert fluids in reservoirs and to establish where and how gel treatments are best applied. Several different types of gelants were examined, including polymer-based gelants, a monomer-based gelant, and a colloidal-silica gelant. This research was directed at gel applications in water injection wells, in production wells, and in high-pressure gas floods. The work examined how the flow properties of gels and gelling agents are influenced by permeability, lithology, and wettability. Other goals included determining the proper placement of gelants, the stability of in-place gels, and the types of gels required for the various oil recovery processes and for different scales of reservoir heterogeneity. During this three-year project, a number of theoretical analyses were performed to determine where gel treatments are expected to work best and where they are not expected to be effective. The most important, predictions from these analyses are presented. Undoubtedly, some of these predictions will be controversial. However, they do provide a starting point in establishing guidelines for the selection of field candidates for gel treatments. A logical next step is to seek field data that either confirm or contradict these predictions. The experimental work focused on four types of gels: (1) resorcinol-formaldehyde, (2) colloidal silica, (3) Cr{sup 3+}(chloride)-xanthan, and (4) Cr{sup 3+}(acetate)-polyacrylamide. All experiments were performed at 41{degrees}C.

  11. Fluid dynamics of active heterogeneities in a mantle plume conduit

    NASA Astrophysics Data System (ADS)

    Farnetani, C. G.; Limare, A.; Hofmann, A. W.

    2015-12-01

    Laboratory experiments and numerical simulations indicate that the flow of a purely thermal plume preserves the azimuthal zonation of the source region, thus providing a framework to attribute a deep origin to the isotopic zonation of Hawaiian lavas. However, previous studies were limited to passive heterogeneities not affecting the flow. We go beyond this simplification by considering active heterogeneities which are compositionally denser, or more viscous, and we address the following questions: (1) How do active heterogeneities modify the axially symmetric velocity field of the plume conduit? (2) Under which conditions is the azimuthal zonation of the source region no longer preserved in the plume stem? (3) How do active heterogeneities deform during upwelling and what is their shape once at sublithospheric depths? We conducted both laboratory experiments, using a Particle Image Velocimetry (PIV) to calculate the velocity field, and high resolution three-dimensional simulations where millions of tracers keep track of the heterogeneous fluid. For compositionally denser heterogeneities we cover a range of buoyancy ratios 0fluid and η is viscosity. The initial heterogeneity has the arbitrary shape of a sphere and we vary its volume and its distance from the plume axis. We find that by increasing λ, the shape of the heterogeneity changes from filament-like to blob-like characterized by internal rotation and little stretching. By increasing B the heterogeneity tends to spread at the base of the plume stem and to rise as a tendril close to the axis, so that the initial zonation may be poorly preserved. We also find that the plume velocity field can be profoundly modified by active heterogeneities, and we explore the relation between strain rates and the evolving shape of the upwelling heterogeneity.

  12. Current Results and Proposed Activities in Microgravity Fluid Dynamics

    NASA Technical Reports Server (NTRS)

    Polezhaev, V. I.

    1996-01-01

    The Institute for Problems in Mechanics' Laboratory work in mathematical and physical modelling of fluid mechanics develops models, methods, and software for analysis of fluid flow, instability analysis, direct numerical modelling and semi-empirical models of turbulence, as well as experimental research and verification of these models and their applications in technological fluid dynamics, microgravity fluid mechanics, geophysics, and a number of engineering problems. This paper presents an overview of the results in microgravity fluid dynamics research during the last two years. Nonlinear problems of weakly compressible and compressible fluid flows are discussed.

  13. Differences in the activities of eight enzymes from ten soil fungi and their possible influences on the surface structure, functional groups, and element composition of soil colloids.

    PubMed

    Wang, Wenjie; Li, Yanhong; Wang, Huimei; Zu, Yuangang

    2014-01-01

    How soil fungi function in soil carbon and nutrient cycling is not well understood by using fungal enzymatic differences and their interactions with soil colloids. Eight extracellular enzymes, EEAs (chitinase, carboxymethyl cellulase, β-glucosidase, protease, acid phosphatase, polyphenol oxidase, laccase, and guaiacol oxidase) secreted by ten fungi were compared, and then the fungi that showed low and high enzymatic activity were co-cultured with soil colloids for the purpose of finding fungi-soil interactions. Some fungi (Gomphidius rutilus, Russula integra, Pholiota adiposa, and Geastrum mammosum) secreted 3-4 enzymes with weak activities, while others (Cyathus striatus, Suillus granulate, Phallus impudicus, Collybia dryophila, Agaricus sylvicola, and Lactarius deliciosus) could secret over 5 enzymes with high activities. The differences in these fungi contributed to the alterations of functional groups (stretching bands of O-H, N-H, C-H, C = O, COO- decreased by 11-60%, while P = O, C-O stretching, O-H bending and Si-O-Si stretching increased 9-22%), surface appearance (disappearance of adhesive organic materials), and elemental compositions (11-49% decreases in C1s) in soil colloids. Moreover, more evident changes were generally in high enzymatic fungi (C. striatus) compared with low enzymatic fungi (G. rutilus). Our findings indicate that inter-fungi differences in EEA types and activities might be responsible for physical and chemical changes in soil colloids (the most active component of soil matrix), highlighting the important roles of soil fungi in soil nutrient cycling and functional maintenance.

  14. Differences in the Activities of Eight Enzymes from Ten Soil Fungi and Their Possible Influences on the Surface Structure, Functional Groups, and Element Composition of Soil Colloids

    PubMed Central

    Wang, Wenjie; Li, Yanhong; Wang, Huimei; Zu, Yuangang

    2014-01-01

    How soil fungi function in soil carbon and nutrient cycling is not well understood by using fungal enzymatic differences and their interactions with soil colloids. Eight extracellular enzymes, EEAs (chitinase, carboxymethyl cellulase, β-glucosidase, protease, acid phosphatase, polyphenol oxidase, laccase, and guaiacol oxidase) secreted by ten fungi were compared, and then the fungi that showed low and high enzymatic activity were co-cultured with soil colloids for the purpose of finding fungi-soil interactions. Some fungi (Gomphidius rutilus, Russula integra, Pholiota adiposa, and Geastrum mammosum) secreted 3–4 enzymes with weak activities, while others (Cyathus striatus, Suillus granulate, Phallus impudicus, Collybia dryophila, Agaricus sylvicola, and Lactarius deliciosus) could secret over 5 enzymes with high activities. The differences in these fungi contributed to the alterations of functional groups (stretching bands of O-H, N-H, C-H, C = O, COO- decreased by 11–60%, while P = O, C-O stretching, O-H bending and Si-O-Si stretching increased 9–22%), surface appearance (disappearance of adhesive organic materials), and elemental compositions (11–49% decreases in C1s) in soil colloids. Moreover, more evident changes were generally in high enzymatic fungi (C. striatus) compared with low enzymatic fungi (G. rutilus). Our findings indicate that inter-fungi differences in EEA types and activities might be responsible for physical and chemical changes in soil colloids (the most active component of soil matrix), highlighting the important roles of soil fungi in soil nutrient cycling and functional maintenance. PMID:25398013

  15. Collective motion in populations of colloidal bots

    NASA Astrophysics Data System (ADS)

    Bartolo, Denis

    One of the origins of active matter physics was the idea that flocks, herds, swarms and shoals could be quantitatively described as emergent ordered phases in self-driven materials. From a somehow dual perspective, I will show how to engineer active materials our of colloidal flocks. I will show how to motorize colloidal particles capable of sensing the orientation of their neighbors and how to handle them in microfluidic chips. These populations of colloidal bots display a non-equilibrium transition toward collective motion. A special attention will be paid to the robustness of the resulting colloidal flocks with respect to geometrical frustration and to quenched disorder.

  16. Chancellor Water Colloids: Characterization and Radionuclide Association

    SciTech Connect

    Abdel-Fattah, Amr I.

    2012-06-18

    Concluding remarks about this paper are: (1) Gravitational settling, zeta potential, and ultrafiltration data indicate the existence of a colloidal phase of both the alpha and beta emitters in the Chancellor water; (2) The low activity combined with high dispersion homogeneity of the Chancellor water indicate that both alpha and beta emitters are not intrinsic colloids; (3) Radionuclides in the Chancellor water, particularly Pu, coexist as dissolved aqueous and sorbed phases - in other words the radionuclides are partitioned between the aqueous phase and the colloidal phase; (4) The presence of Pu as a dissolved species in the aqueous phase, suggests the possibility of Pu in the (V) oxidation state - this conclusion is supported by the similarity of the k{sub d} value of Pu determined in the current study to that determined for Pu(V) sorbed onto smectite colloids, and the similar electrokinetic behavior of the Chancellor water colloids to smectite colloids; (5) About 50% of the Pu(V) is in the aqueous phase and 50% is sorbed on colloids (mass concentration of colloids in the Chancellor water is 0.12 g/L); (6) The k{sub d} of the Pu and the beta emitters (fission products) between aqueous and colloidal phases in the Chancellor water is {approx}8.0 x 10{sup 3} mL/g using two different activity measurement techniques (LSC and alpha spectroscopy); (7) The gravitational settling and size distributions of the association colloids indicate that the properties (at least the physical ones) of the colloids to which the alpha emitters are associated with seem to be different that the properties of the colloids to which the beta emitters are associated with - the beta emitters are associated with very small particles ({approx}50 - 120 nm), while the alpha emitters are associated with relatively larger particles; and (8) The Chancellor water colloids are extremely stable under the natural pH and ionic strength conditions, indicating high potential for transport in the

  17. What happens when pharmaceuticals meet colloids.

    PubMed

    Xing, Yingna; Chen, Xijuan; Zhuang, Jie; Chen, Xin

    2015-12-01

    Pharmaceuticals (PCs) have been widely detected in natural environment due to agricultural application of reclaimed water, sludge and animal wastes. Their potential risks to various ecosystems and even to human health have caused great concern; however, little was known about their environmental behaviors. Colloids (such as clays, metal oxides, and particulate organics) are kind of substances that are active and widespread in the environment. When PCs meet colloids, their interaction may influence the fate, transport, and toxicity of PCs. This review summarizes the progress of studies on the role of colloids in mediating the environmental behaviors of PCs. Synthesized results showed that colloids can adsorb PCs mainly through ion exchange, complexation and non-electrostatic interactions. During this process the structure of colloids and the stability of PCs may be changed. The adsorbed PCs may have higher risks to induce antibiotic resistance; besides, their transport may also be altered considering they have great chance to move with colloids. Solution conditions (such as pH, ionic strength, and cations) could influence these interactions between PCs and colloids, as they can change the forms of PCs and alter the primary forces between PCs and colloids in the solution. It could be concluded that PCs in natural soils could bind with colloids and then co-transport during the processes of irrigation, leaching, and erosion. Therefore, colloid-PC interactions need to be understood for risk assessment of PCs and the best management practices of various ecosystems (such as agricultural and wetland systems).

  18. Acetylcholinesterase activity in the cerebrospinal fluid of dogs with seizures.

    PubMed

    Chai, Orit; Sommer, Adi; Zimmerman, Gabriel; Soreq, Hermona; Friedman, Alon; Bdolah-Abram, Tali; Aroch, Itamar; Shamir, Merav H

    2013-10-01

    Recent studies in animal models have focused on the role of cholinergic elements, mainly acetylcholinesterase (AChE) and the 'readthrough' acetylcholinesterase isoform (AChE-R), in seizures. A prospective double-masked study was conducted to assess the activity of AChE and AChE-R in cerebrospinal fluid (CSF) of 26 dogs post-seizure, 28 dogs with intervertebral disc disease (IVDD) and 16 healthy dogs. AChE was also measured in the serum in the post-seizure and IVDD groups. The results showed no significant differences in CSF AChE among the three groups. AChE-R was not detected in any dog and AChE in the serum was similar between groups. This preliminary study provides new information on AChE and AChE-R in the CSF and sera of dogs following naturally-occurring seizures.

  19. Structure and thermodynamics of a mixture of patchy and spherical colloids: A multi-body association theory with complete reference fluid information

    NASA Astrophysics Data System (ADS)

    Bansal, Artee; Asthagiri, D.; Cox, Kenneth R.; Chapman, Walter G.

    2016-08-01

    A mixture of solvent particles with short-range, directional interactions and solute particles with short-range, isotropic interactions that can bond multiple times is of fundamental interest in understanding liquids and colloidal mixtures. Because of multi-body correlations, predicting the structure and thermodynamics of such systems remains a challenge. Earlier Marshall and Chapman [J. Chem. Phys. 139, 104904 (2013)] developed a theory wherein association effects due to interactions multiply the partition function for clustering of particles in a reference hard-sphere system. The multi-body effects are incorporated in the clustering process, which in their work was obtained in the absence of the bulk medium. The bulk solvent effects were then modeled approximately within a second order perturbation approach. However, their approach is inadequate at high densities and for large association strengths. Based on the idea that the clustering of solvent in a defined coordination volume around the solute is related to occupancy statistics in that defined coordination volume, we develop an approach to incorporate the complete information about hard-sphere clustering in a bulk solvent at the density of interest. The occupancy probabilities are obtained from enhanced sampling simulations but we also develop a concise parametric form to model these probabilities using the quasichemical theory of solutions. We show that incorporating the complete reference information results in an approach that can predict the bonding state and thermodynamics of the colloidal solute for a wide range of system conditions.

  20. Structure and thermodynamics of a mixture of patchy and spherical colloids: A multi-body association theory with complete reference fluid information.

    PubMed

    Bansal, Artee; Asthagiri, D; Cox, Kenneth R; Chapman, Walter G

    2016-08-21

    A mixture of solvent particles with short-range, directional interactions and solute particles with short-range, isotropic interactions that can bond multiple times is of fundamental interest in understanding liquids and colloidal mixtures. Because of multi-body correlations, predicting the structure and thermodynamics of such systems remains a challenge. Earlier Marshall and Chapman [J. Chem. Phys. 139, 104904 (2013)] developed a theory wherein association effects due to interactions multiply the partition function for clustering of particles in a reference hard-sphere system. The multi-body effects are incorporated in the clustering process, which in their work was obtained in the absence of the bulk medium. The bulk solvent effects were then modeled approximately within a second order perturbation approach. However, their approach is inadequate at high densities and for large association strengths. Based on the idea that the clustering of solvent in a defined coordination volume around the solute is related to occupancy statistics in that defined coordination volume, we develop an approach to incorporate the complete information about hard-sphere clustering in a bulk solvent at the density of interest. The occupancy probabilities are obtained from enhanced sampling simulations but we also develop a concise parametric form to model these probabilities using the quasichemical theory of solutions. We show that incorporating the complete reference information results in an approach that can predict the bonding state and thermodynamics of the colloidal solute for a wide range of system conditions.

  1. Thermophoresis of charged colloidal particles.

    PubMed

    Fayolle, Sébastien; Bickel, Thomas; Würger, Alois

    2008-04-01

    Thermally induced particle flow in a charged colloidal suspension is studied in a fluid-mechanical approach. The force density acting on the charged boundary layer is derived in detail. From Stokes' equation with no-slip boundary conditions at the particle surface, we obtain the particle drift velocity and the thermophoretic transport coefficients. The results are discussed in view of previous work and available experimental data.

  2. Immobilization of enzymes using non-ionic colloidal liquid aphrons (CLAs): Activity kinetics, conformation, and energetics.

    PubMed

    Ward, Keeran; Xi, Jingshu; Stuckey, David C

    2016-05-01

    This study seeks to examine the ability of non-ionic/non-polar Colloidial Liquid Aphrons (CLAs) to preserve enzyme functionality upon immobilization and release. CLAs consisting of micron-sized oil droplets surrounded by a thin aqueous layer stabilized by a mixture of surfactants, were formulated by direct addition (pre-manufacture addition) using 1% Tween 80/mineral oil and 1% Tween 20 and the enzymes lipase, aprotinin and α-chymotrypsin. The results of activity assays for both lipase and α-chymotrypsin showed that kinetic activity increased upon immobilization by factors of 7 and 5.5, respectively, while aprotinin retained approximately 85% of its native activity. The conformation of the enzymes released through desorption showed no significant alterations compared to their native state. Changes in pH and temperature showed that optimum conditions did not change after immobilization, while analysis of activation energy for the immobilized enzyme showed an increase in activity at higher temperatures. Furthermore, the effect of bound water within the aphron structure allowed for some degree of enzyme hydration, and this hydration was needed for an active conformation with results showing a decrease in ΔH* for the immobilized system compared to its native counterpart.

  3. Self-pinning by colloids confined at a contact line

    NASA Astrophysics Data System (ADS)

    Weon, Byung; Je, Jung

    2013-03-01

    Colloidal particles suspended in a fluid usually inhibit complete wetting of the fluid on a solid surface and cause pinning of the contact line, known as self-pinning. We show differences in spreading and drying behaviors of pure and colloidal droplets using optical and confocal imaging methods. These differences come from spreading inhibition by colloids confined at a contact line. We propose a self-pinning mechanism based on spreading inhibition by colloids. We find a good agreement between the mechanism and the experimental result taken by directly tracking individual colloids near the contact lines of evaporating colloidal droplets. This research was supported by the Creative Research Initiatives (Functional X-ray Imaging) of MEST/NRF.

  4. Flocking ferromagnetic colloids

    PubMed Central

    Kaiser, Andreas; Snezhko, Alexey; Aranson, Igor S.

    2017-01-01

    Assemblages of microscopic colloidal particles exhibit fascinating collective motion when energized by electric or magnetic fields. The behaviors range from coherent vortical motion to phase separation and dynamic self-assembly. Although colloidal systems are relatively simple, understanding their collective response, especially under out-of-equilibrium conditions, remains elusive. We report on the emergence of flocking and global rotation in the system of rolling ferromagnetic microparticles energized by a vertical alternating magnetic field. By combing experiments and discrete particle simulations, we have identified primary physical mechanisms, leading to the emergence of large-scale collective motion: spontaneous symmetry breaking of the clockwise/counterclockwise particle rotation, collisional alignment of particle velocities, and random particle reorientations due to shape imperfections. We have also shown that hydrodynamic interactions between the particles do not have a qualitative effect on the collective dynamics. Our findings shed light on the onset of spatial and temporal coherence in a large class of active systems, both synthetic (colloids, swarms of robots, and biopolymers) and living (suspensions of bacteria, cell colonies, and bird flocks). PMID:28246633

  5. Diagnostic value of creatine kinase activity in canine cerebrospinal fluid

    PubMed Central

    Ferreira, Alexandra

    2016-01-01

    This study aimed to determine whether creatine kinase (CK) activity in cerebrospinal fluid (CSF) has diagnostic value for various groups of neurological conditions or for different anatomical areas of the nervous system (NS). The age, breed, results of CSF analysis, and diagnosis of 578 canine patients presenting with various neurological conditions between January 2009 and February 2015 were retrospectively collected. The cases were divided according to anatomical areas of the nervous system, i.e., brain, spinal cord, and peripheral nervous system, and into groups according to the nature of the condition diagnosed: vascular, immune/inflammatory/infectious, traumatic, toxic, anomalous, metabolic, idiopathic, neoplastic, and degenerative. Statistical analysis showed that CSF-CK alone cannot be used as a diagnostic tool and that total proteins in the CSF and red blood cells (RBCs) do not have a significant relationship with the CSF-CK activity. CSF-CK did not have a diagnostic value for different disease groups or anatomical areas of the nervous system. PMID:27708448

  6. Minimal continuum theories of structure formation in dense active fluids

    NASA Astrophysics Data System (ADS)

    Dunkel, Jörn; Heidenreich, Sebastian; Bär, Markus; Goldstein, Raymond E.

    2013-04-01

    Self-sustained dynamical phases of living matter can exhibit remarkable similarities over a wide range of scales, from mesoscopic vortex structures in microbial suspensions and motility assays of biopolymers to turbulent large-scale instabilities in flocks of birds or schools of fish. Here, we argue that, in many cases, the phenomenology of such active states can be efficiently described in terms of fourth- and higher-order partial differential equations. Structural transitions in these models can be interpreted as Landau-type kinematic transitions in Fourier (wavenumber) space, suggesting that microscopically different biological systems can share universal long-wavelength features. This general idea is illustrated through numerical simulations for two classes of continuum models for incompressible active fluids: a Swift-Hohenberg-type scalar field theory, and a minimal vector model that extends the classical Toner-Tu theory and appears to be a promising candidate for the quantitative description of dense bacterial suspensions. We discuss how microscopic symmetry-breaking mechanisms can enter macroscopic continuum descriptions of collective microbial motion near surfaces, and conclude by outlining future applications.

  7. Computational Study of Colloidal Droplet Interactions with Three Dimensional Structures

    DTIC Science & Technology

    2015-05-18

    SECURITY CLASSIFICATION OF: The colloidal droplet spreading on and sorption into a porous medium is important to 3D printing technology. In this study... colloidal fluid distribution in the porous structure after sorption of single/multiple droplets in powder beds. The spreading of the droplet on the surface...Feb-2015 Approved for Public Release; Distribution Unlimited Final Report: Computational Study of Colloidal Droplet Interactions with Three Dimensional

  8. Colloidally stable surface-modified iron oxide nanoparticles: Preparation, characterization and anti-tumor activity

    NASA Astrophysics Data System (ADS)

    Macková, Hana; Horák, Daniel; Donchenko, Georgiy Viktorovich; Andriyaka, Vadim Ivanovich; Palyvoda, Olga Mikhailovna; Chernishov, Vladimir Ivanovich; Chekhun, Vasyl Fedorovich; Todor, Igor Nikolaevich; Kuzmenko, Oleksandr Ivanovich

    2015-04-01

    Maghemite (γ-Fe2O3) nanoparticles were obtained by co-precipitation of Fe(II) and Fe(III) chlorides and subsequent oxidation with sodium hypochlorite and coated with poly(N,N-dimethylacrylamide-co-acrylic acid) [P(DMAAm-AA)]. They were characterized by a range of methods including transmission electron microscopy (TEM), elemental analysis, dynamic light scattering (DLS) and zeta potential measurements. The effect of superparamagnetic P(DMAAm-AA)-γ-Fe2O3 nanoparticles on oxidation of blood lipids, glutathione and proteins in blood serum was detected using 2-thiobarbituric acid and the ThioGlo fluorophore. Finally, mice received magnetic nanoparticles administered per os and the antitumor activity of the particles was tested on Lewis lung carcinoma (LLC) in male mice line C57BL/6 as an experimental in vivo metastatic tumor model; the tumor size was measured and the number of metastases in lungs was determined. Surface-modified γ-Fe2O3 nanoparticles showed higher antitumor and antimetastatic activities than commercial CuFe2O4 particles and the conventional antitumor agent cisplatin.

  9. Physics of colloidal suspensions

    NASA Astrophysics Data System (ADS)

    Huang, Jiping

    Colloidal suspensions are complex fluids that consist of mesoscopic particles suspended in a solvent, e.g. water, oil, etc. In this thesis, the objective is to investigate the four aspects of colloidal suspensions: electrorotation, dielectrophoresis, dielectric dispersion spectrum, and nonlinear alternating current (AC) response. The traditional theories failed to fit the recent experimental data, and hence, for the purpose of a better fitting, we aim to develop new theories. In addition, our theories also predicted some new phenomena which are expected to be verified in experiments. Electrorotation has been increasingly employed as a sensitive tool for non-invasive studies of a broad variety of microparticles, ranging from living cells to spores and seeds, as well as synthetic materials. In order to analyze the abundant experimental data, we extend here the existing theory by taking into account crucial elements, such as inhomogeneities, multipolar interactions, nonspherical shapes as well as many-body (local-field) effects. Good agreement is shown between our theoretical results and the experimental data. Dielectrophoresis is typically used for micromanipulation and separation of biological cellular size particles, and it has recently been successfully applied to submicron size particles as well. Specific applications include diverse problems in medicine, colloidal science and nanotechnology. To analyze the recent experimental observations, we present a theory which includes the effects of both charging and multipolar interactions. Our theoretical results are favorably compared with the recent experimental observations. Recent experiments revealed that the dielectric dispersion spectrum of fission yeast cells in a suspension was mainly composed of two sub-dispersions. The low-frequency sub-dispersion depended on the cell length, while the high-frequency one was independent of it. However, the existing theory does not fit the experimental data. Hence, we here put

  10. Physical ageing of the contact line on colloidal particles at liquid interfaces.

    PubMed

    Kaz, David M; McGorty, Ryan; Mani, Madhav; Brenner, Michael P; Manoharan, Vinothan N

    2011-12-04

    Young's law predicts that a colloidal sphere in equilibrium with a liquid interface will straddle the two fluids, its height above the interface defined by an equilibrium contact angle. This has been used to explain why colloids often bind to liquid interfaces, and has been exploited in emulsification, water purification, mineral recovery, encapsulation and the making of nanostructured materials. However, little is known about the dynamics of binding. Here we show that the adsorption of polystyrene microspheres to a water/oil interface is characterized by a sudden breach and an unexpectedly slow relaxation. The relaxation appears logarithmic in time, indicating that complete equilibration may take months. Surprisingly, viscous dissipation appears to play little role. Instead, the observed dynamics, which bear strong resemblance to ageing in glassy systems, agree well with a model describing activated hopping of the contact line over nanoscale surface heterogeneities. These results may provide clues to longstanding questions on colloidal interactions at an interface.

  11. Dynamics of evaporative colloidal patterning

    NASA Astrophysics Data System (ADS)

    Kaplan, C. Nadir; Wu, Ning; Mandre, Shreyas; Aizenberg, Joanna; Mahadevan, L.

    2015-09-01

    Drying suspensions often leave behind complex patterns of particulates, as might be seen in the coffee stains on a table. Here, we consider the dynamics of periodic band or uniform solid film formation on a vertical plate suspended partially in a drying colloidal solution. Direct observations allow us to visualize the dynamics of band and film deposition, where both are made of multiple layers of close packed particles. We further see that there is a transition between banding and filming when the colloidal concentration is varied. A minimal theory of the liquid meniscus motion along the plate reveals the dynamics of the banding and its transition to the filming as a function of the ratio of deposition and evaporation rates. We also provide a complementary multiphase model of colloids dissolved in the liquid, which couples the inhomogeneous evaporation at the evolving meniscus to the fluid and particulate flows and the transition from a dilute suspension to a porous plug. This allows us to determine the concentration dependence of the bandwidth and the deposition rate. Together, our findings allow for the control of drying-induced patterning as a function of the colloidal concentration and evaporation rate.

  12. Surface active stabilizer Tyloxapol in colloidal dispersions exerts cytostatic effects and apoptotic dismissal of cells

    SciTech Connect

    Kristl, Julijana; Teskac, Karmen; Milek, Miha; Mlinaric-Rascan, Irena

    2008-10-15

    Solid lipid nanoparticles (SLN) have been praised for their advantageous drug delivery properties such as biocompatibility, controlled release and passive drug targeting. However, the cytotoxicity of SLN and their ingredients, especially over a longer time period, has not been investigated in detail. We examined the critical issues regarding the use of a surface active stabilizer Tyloxapol (Tyl) for the preparation of solid lipid particles (SLP) and their effects on cellular functions and viability. SLP composed of behenate, phospholipids and a stabilizer, Tyloxapol or Lutrol (Lut), were prepared by the lipid melt method, labeled with a fluorescent dye and tested on Jurkat or HEK293 cells. The nano-sized particles were rapidly internalized and exhibited cytoplasmic localization. Incubation of cells with SLP-Tyl resulted in a dose- and time-dependent cytostatic effect, and also caused moderate and delayed cytotoxicity. Tyloxapol solution or SLP-Tyl dispersion caused the detachment of HEK293 cells, a decrease in cell proliferation and alterations in cellular morphology. Cell cycle analysis revealed that, while the unfavourable effects of SLP-Tyl and Tyloxapol solution are similar initially, longer incubation results in partial recovery of cells incubated with the dispersion of SLP-Tyl, whereas the presence of Tyloxapol solution induces apoptotic cell death. These findings indicate that Tyloxapol is an unfavourable stabilizer of SLP used for intracellular delivery and reinforce the role of stabilizers in a design of SLP with minimal cytotoxic properties.

  13. Active microchannel fluid processing unit and method of making

    DOEpatents

    Bennett, Wendy D [Kennewick, WA; Martin, Peter M [Kennewick, WA; Matson, Dean W [Kennewick, WA; Roberts, Gary L [West Richland, WA; Stewart, Donald C [Richland, WA; Tonkovich, Annalee Y [Pasco, WA; Zilka, Jennifer L [Pasco, WA; Schmitt, Stephen C [Dublin, OH; Werner, Timothy M [Columbus, OH

    2002-12-10

    The present invention is an active microchannel fluid processing unit and method of making, both relying on having (a) at least one inner thin sheet; (b) at least one outer thin sheet; (c) defining at least one first sub-assembly for performing at least one first unit operation by stacking a first of the at least one inner thin sheet in alternating contact with a first of the at least one outer thin sheet into a first stack and placing an end block on the at least one inner thin sheet, the at least one first sub-assembly having at least a first inlet and a first outlet; and (d) defining at least one second sub-assembly for performing at least one second unit operation either as a second flow path within the first stack or by stacking a second of the at least one inner thin sheet in alternating contact with second of the at least one outer thin sheet as a second stack, the at least one second sub-assembly having at least a second inlet and a second outlet.

  14. Active microchannel fluid processing unit and method of making

    DOEpatents

    Bennett, Wendy D [Kennewick, WA; Martin, Peter M [Kennewick, WA; Matson, Dean W [Kennewick, WA; Roberts, Gary L [West Richland, WA; Stewart, Donald C [Richland, WA; Tonkovich, Annalee Y [Pasco, WA; Zilka, Jennifer L [Pasco, WA; Schmitt, Stephen C [Dublin, OH; Werner, Timothy M [Columbus, OH

    2001-01-01

    The present invention is an active microchannel fluid processing unit and method of making, both relying on having (a) at least one inner thin sheet; (b) at least one outer thin sheet; (c) defining at least one first sub-assembly for performing at least one first unit operation by stacking a first of the at least one inner thin sheet in alternating contact with a first of the at least one outer thin sheet into a first stack and placing an end block on the at least one inner thin sheet, the at least one first sub-assembly having at least a first inlet and a first outlet; and (d) defining at least one second sub-assembly for performing at least one second unit operation either as a second flow path within the first stack or by stacking a second of the at least one inner thin sheet in alternating contact with second of the at least one outer thin sheet as a second stack, the at least one second sub-assembly having at least a second inlet and a second outlet.

  15. Active fluid mixing with magnetic microactuators for capture of salmonella

    NASA Astrophysics Data System (ADS)

    Hanasoge, S.; Owen, D.; Ballard, M.; Mills, Z.; Xu, J.; Erickson, M.; Hesketh, P. J.; Alexeev, A.

    2016-05-01

    Detection of low concentrations of bacteria in food samples is a challenging process. Key to this process is the separation of the target from the food matrix. We demonstrate magnetic beads and magnetic micro-cilia based microfluidic mixing and capture, which are particularly useful for pre-concentrating the target. The first method we demonstrate makes use of magnetic microbeads held on to NiFe discs on the surface of the substrate. These beads are rotated around the magnetic discs by rotating the external magnetic field. The second method we demonstrate shows the use of cilia which extends into the fluid and is manipulated by a rotating external field. Magnetic micro-features were fabricated by evaporating NiFe alloy at room temperature, on to patterned photoresist. The high magnetic permeability of NiFe allows for maximum magnetic force on the features. The magnetic features were actuated using an external rotating magnet up to frequencies of 50Hz. We demonstrate active mixing produced by the microbeads and the cilia in a microchannel. Also, we demonstrate the capture of target species in a sample using microbeads.

  16. Inventions Utilizing Microfluidics and Colloidal Particles

    NASA Technical Reports Server (NTRS)

    Marr, David W.; Gong, Tieying; Oakey, John; Terray, Alexander V.; Wu, David T.

    2009-01-01

    Several related inventions pertain to families of devices that utilize microfluidics and/or colloidal particles to obtain useful physical effects. The families of devices can be summarized as follows: (1) Microfluidic pumps and/or valves wherein colloidal-size particles driven by electrical, magnetic, or optical fields serve as the principal moving parts that propel and/or direct the affected flows. (2) Devices that are similar to the aforementioned pumps and/or valves except that they are used to manipulate light instead of fluids. The colloidal particles in these devices are substantially constrained to move in a plane and are driven to spatially order them into arrays that function, variously, as waveguides, filters, or switches for optical signals. (3) Devices wherein the ultra-laminar nature of microfluidic flows is exploited to effect separation, sorting, or filtering of colloidal particles or biological cells in suspension. (4) Devices wherein a combination of confinement and applied electrical and/or optical fields forces the colloidal particles to become arranged into three-dimensional crystal lattices. Control of the colloidal crystalline structures could be exploited to control diffraction of light. (5) Microfluidic devices, incorporating fluid waveguides, wherein switching of flows among different paths would be accompanied by switching of optical signals.

  17. Locomotion in fluids using shape-changing active materials.

    NASA Astrophysics Data System (ADS)

    Shelley, Michael; Palffy-Muhoray, Peter; Comacho-Lopez, Miguel; Malacarne, Luis; Finkelmann, Heino

    2004-11-01

    Liquid crystal elastomers (LCEs) are rubbers made up of liquid crystal molecules, and can exhibit large and fast shape deformations when exposed to external fields. We discuss recent experiments in which an LCE sample floating on water is illuminated by a laser. Upon illumination the sample simultaneously changes both its shape and position, ``swimming'' away from the laser light. In this system, energy from the light is used to effect momentum transfer between the LCE body and the surrounding fluid. We discuss the origins of the shape change, the resulting LCE/fluid interaction, and the modeling of such fluid/materials systems.

  18. Specific detection of cysteine and homocysteine in biological fluids by tuning the pH values of fluorosurfactant-stabilized gold colloidal solution.

    PubMed

    Xiao, Qunyan; Shang, Fei; Xu, Xuechen; Li, Qianqian; Lu, Chao; Lin, Jin-Ming

    2011-12-15

    This study describes the use of 14 nm nonionic fluorosurfactant-capped gold nanoparticles (FSN-capped AuNPs) for the simultaneous detection of cysteine (Cys) and homocysteine (Hcy) using colorimetric method, requiring no use of separation techniques. It was found that the kinetics of Cys/Hcy-induced aggregation of the 14 nm FSN-capped AuNPs strongly depends on the pH value of gold colloidal solution. At a pH of 6.5, the Cys-induced aggregation kinetics of the FSN-capped AuNPs was almost identical to that induced by Hcy, facilitating simultaneous detection of total Cys and Hcy up to a concentration as low as 0.15 μM; while at pH 12.0, the kinetics of Cys-induced aggregation was much faster than that inducted by Hcy, leading to selective detection of Cys at concentration as low as 1.0 μM in the presence of Hcy. The applicability of the method was validated by spiking known amount of Cys and Hcy in human urine and plasma samples, obtaining a recovery of 95.4-105.5%. The present approach is simple, high selective and provides high reproducibility, and has a great potentiality in disease diagnosis.

  19. [Research activities in applied mathematics, fluid mechanics, and computer science

    NASA Technical Reports Server (NTRS)

    1995-01-01

    This report summarizes research conducted at the Institute for Computer Applications in Science and Engineering in applied mathematics, fluid mechanics, and computer science during the period April 1, 1995 through September 30, 1995.

  20. Colloidal Gelation-2 and Colloidal Disorder-Order Transition-2 Investigations Conducted on STS-95

    NASA Technical Reports Server (NTRS)

    Hoffmann, Monica T.

    2000-01-01

    The Colloidal Gelation-2 (CGEL 2) and Colloidal Disorder-Order Transition-2 (CDOT 2) investigations flew on Space Shuttle Discovery mission STS-95 (also known as the John Glenn Mission). These investigations were part of a series of colloid experiments designed to help scientists answer fundamental science questions and reduce the trial and error involved in developing new and better materials. Industries dealing with semiconductors, electro-optics, ceramics, and composites are just a few that may benefit from this knowledge. The goal of the CGEL 2 investigation was to study the fundamental properties of colloids to help scientists better understand their nature and make them more useful for technology. Colloids consist of very small (submicron) particles suspended in a fluid. They play a critical role in the technology of this country, finding uses in materials ranging from paints and coatings to drugs, cosmetics, food, and drink. Although these products are routinely produced and used, there are still many aspects of their behavior about which scientists know little. Understanding their structures may allow scientists to manipulate the physical properties of colloids (a process called "colloidal engineering") to produce new materials and products. Colloid research may even improve the processing of known products to enhance their desirable properties.

  1. What Is a Colloid?

    ERIC Educational Resources Information Center

    Lamb, William G.

    1985-01-01

    Describes the properties of colloids, listing those commonly encountered (such as whipped cream, mayonnaise, and fog). Also presents several experiments using colloids and discusses "Silly Putty," a colloid with viscoelastic properties whose counterintuitive properties result from its mixture of polymers. (DH)

  2. Microbial life in cold, hydrologically active oceanic crustal fluids

    NASA Astrophysics Data System (ADS)

    Meyer, J. L.; Jaekel, U.; Girguis, P. R.; Glazer, B. T.; Huber, J. A.

    2012-12-01

    It is estimated that at least half of Earth's microbial biomass is found in the deep subsurface, yet very little is known about the diversity and functional roles of these microbial communities due to the limited accessibility of subseafloor samples. Ocean crustal fluids, which may have a profound impact on global nutrient cycles given the large volumes of water moving through the crustal aquifer, are particularly difficult to sample. Access to uncontaminated ocean crustal fluids is possible with CORK (Circulation Obviation Retrofit Kit) observatories, installed through the Integrated Ocean Drilling Program (IODP). Here we present the first microbiological characterization of the formation fluids from cold, oxygenated igneous crust at North Pond on the western flank of the Mid Atlantic Ridge. Fluids were collected from two CORKs installed at IODP boreholes 1382A and 1383C and include fluids from three different depth horizons within oceanic crust. Collection of borehole fluids was monitored in situ using an oxygen optode and solid-state voltammetric electrodes. In addition, discrete samples were analyzed on deck using a comparable lab-based system as well as a membrane-inlet mass spectrometer to quantify all dissolved volatiles up to 200 daltons. The instruments were operated in parallel and both in situ and shipboard geochemical measurements point to a highly oxidized fluid, revealing an apparent slight depletion of oxygen in subsurface fluids (~215μM) relative to bottom seawater (~245μM). We were unable to detect reduced hydrocarbons, e.g. methane. Cell counts indicated the presence of roughly 2 x 10^4 cells per ml in all fluid samples, and DNA was extracted and amplified for the identification of both bacterial and archaeal community members. The utilization of ammonia, nitrate, dissolved inorganic carbon, and acetate was measured using stable isotopes, and oxygen consumption was monitored to provide an estimate of the rate of respiration per cell per day

  3. Predicting crystals of Janus colloids

    NASA Astrophysics Data System (ADS)

    Vissers, Teun; Preisler, Zdeněk; Smallenburg, Frank; Dijkstra, Marjolein; Sciortino, Francesco

    2013-04-01

    We present a numerical study on the phase diagram for a simple model of Janus colloids, including ordered and disordered structures. Using a range of techniques, we generate a set of crystal structures and investigate their relative stability field in the pressure-temperature and temperature-density planes by means of free-energy calculations and thermodynamic integration schemes. We find that despite the Janus colloids' simple architecture, they form stable crystal structures with complicated bond-topologies on an underlying face-centered-cubic or hexagonal-close-packed lattice. In addition, we find a phase consisting of wrinkled bilayer sheets, competing with both the fluid and the crystal phases. We detect a metastable gas-liquid coexistence which displays a micellization-driven re-entrant behavior.

  4. Flow of colloid particle solution past macroscopic bodies and drag crisis

    SciTech Connect

    Iordanskii, S. V.

    2013-11-15

    The motion of colloid particles in a viscous fluid flow is considered. Small sizes of colloid particles as compared to the characteristic scale of the flow make it possible to calculate their velocity relative to the liquid. If the density of a colloid particle is higher than the density of the liquid, the flow splits into regions in which the velocity of colloid particles coincides with the velocity of the liquid and regions of flow stagnation in which the colloid velocity is higher than the velocity of the fluid. This effect is used to explain qualitatively the decrease in the drag to the flows past macroscopic bodies and flows in pipes.

  5. Laboratory investigation of the factors impact on bubble size, pore blocking and enhanced oil recovery with aqueous Colloidal Gas Aphron.

    PubMed

    Shi, Shenglong; Wang, Yefei; Li, Zhongpeng; Chen, Qingguo; Zhao, Zenghao

    Colloidal Gas Aphron as a mobility control in enhanced oil recovery is becoming attractive; it is also designed to block porous media with micro-bubbles. In this paper, the effects of surfactant concentration, polymer concentration, temperature and salinity on the bubble size of the Colloidal Gas Aphron were studied. Effects of injection rates, Colloidal Gas Aphron fluid composition, heterogeneity of reservoir on the resistance to the flow of Colloidal Gas Aphron fluid through porous media were investigated. Effects of Colloidal Gas Aphron fluid composition and temperature on residual oil recovery were also studied. The results showed that bubble growth rate decreased with increasing surfactant concentration, polymer concentration, and decreasing temperature, while it decreased and then increased slightly with increasing salinity. The obvious increase of injection pressure was observed as more Colloidal Gas Aphron fluid was injected, indicating that Colloidal Gas Aphron could block the pore media effectively. The effectiveness of the best blend obtained through homogeneous sandpack flood tests was modestly improved in the heterogeneous sandpack. The tertiary oil recovery increased 26.8 % by Colloidal Gas Aphron fluid as compared to 20.3 % by XG solution when chemical solution of 1 PV was injected into the sandpack. The maximum injected pressure of Colloidal Gas Aphron fluid was about three times that of the XG solution. As the temperature increased, the Colloidal Gas Aphron fluid became less stable; the maximum injection pressure and tertiary oil recovery of Colloidal Gas Aphron fluid decreased.

  6. Electrohydrodynamically patterned colloidal crystals

    NASA Technical Reports Server (NTRS)

    Hayward, Ryan C. (Inventor); Poon, Hak F. (Inventor); Xiao, Yi (Inventor); Saville, Dudley A. (Inventor); Aksay, Ilhan A. (Inventor)

    2003-01-01

    A method for assembling patterned crystalline arrays of colloidal particles using ultraviolet illumination of an optically-sensitive semiconducting anode while using the anode to apply an electronic field to the colloidal particles. The ultraviolet illumination increases current density, and consequently, the flow of the colloidal particles. As a result, colloidal particles can be caused to migrate from non-illuminated areas of the anode to illuminated areas of the anode. Selective illumination of the anode can also be used to permanently affix colloidal crystals to illuminated areas of the anode while not affixing them to non-illuminated areas of the anode.

  7. Magnetic fluid poly(ethylene glycol) with moderate anticancer activity

    NASA Astrophysics Data System (ADS)

    Závišová, Vlasta; Koneracká, Martina; Múčková, Marta; Lazová, Jana; Juríková, Alena; Lancz, Gábor; Tomašovičová, Natália; Timko, Milan; Kováč, Jozef; Vávra, Ivo; Fabián, Martin; Feoktystov, Artem V.; Garamus, Vasil M.; Avdeev, Mikhail V.; Kopčanský, Peter

    2011-05-01

    Poly(ethylene glycol) (PEG)-containing magnetic fluids - magnetite (Fe 3O 4) stabilized by sodium oleate - were prepared. Magnetic measurements confirmed superparamagnetic behaviour at room temperature. The structure of that kind of magnetic fluid was characterized using different techniques, including electron microscopy, photon cross correlation spectroscopy and small-angle neutron scattering, while the adsorption of PEG on magnetic particles was analyzed by differential scanning calorimetry and Fourier transform infrared spectroscopy. From the in vitro toxicity tests it was found that a magnetic fluid containing PEG (MFPEG) partially inhibited the growth of cancerous B16 cells at the highest tested dose (2.1 mg/ml of Fe 3O 4 in MFPEG).

  8. Colloidal activated carbon for in-situ groundwater remediation--Transport characteristics and adsorption of organic compounds in water-saturated sediment columns.

    PubMed

    Georgi, Anett; Schierz, Ariette; Mackenzie, Katrin; Kopinke, Frank-Dieter

    2015-08-01

    Colloidal activated carbon can be considered as a versatile adsorbent and carrier material for in-situ groundwater remediation. In analogy to other nanoremediation approaches, activated carbon colloids (ACC) can be injected into the subsurface as aqueous suspensions. Deposition of ACC on the sediment creates a sorption barrier against further spreading of hydrophobic pollutants. This study deals with the optimization of ACC and their suspensions with a focus on suspension stability, ACC mobility in saturated porous media and sorption efficiency towards organic contaminants. ACC with an appropriate particle size range (d50=0.8μm) were obtained from a commercial powdered activated carbon product by means of wet-grinding. Among the various methods tested for stabilization of ACC suspensions, addition of humic acid (HA) and carboxymethyl cellulose (CMC) showed the best results. Due to electrosteric stabilization by adsorption of CMC, suspensions remained stable even at high ACC concentrations (11gL(-1)) and conditions typical of very hard water (5mM divalent cations). Furthermore, CMC-stabilized ACC showed high mobility in a water-saturated sandy sediment column (filter coefficient λ=0.2m(-1)). Such mobility is a pre-requisite for in-situ installation of sorption or reaction barriers by simple injection-well or direct-push application of ACC suspensions. Column experiments with organic model compounds proved the efficacy of ACC deposits on sediment for contaminant adsorption and retardation under flow-through conditions.

  9. Local elastic response measured near the colloidal glass transition

    NASA Astrophysics Data System (ADS)

    Anderson, D.; Schaar, D.; Hentschel, H. G. E.; Hay, J.; Habdas, Piotr; Weeks, Eric R.

    2013-03-01

    We examine the response of a dense colloidal suspension to a local force applied by a small magnetic bead. For small forces, we find a linear relationship between the force and the displacement, suggesting the medium is elastic, even though our colloidal samples macroscopically behave as fluids. We interpret this as a measure of the strength of colloidal caging, reflecting the proximity of the samples' volume fractions to the colloidal glass transition. The strain field of the colloidal particles surrounding the magnetic probe appears similar to that of an isotropic homogeneous elastic medium. When the applied force is removed, the strain relaxes as a stretched exponential in time. We introduce a model that suggests this behavior is due to the diffusive relaxation of strain in the colloidal sample.

  10. Saturated Zone Colloid Transport

    SciTech Connect

    H. Viswanathan; P. Reimus

    2003-09-05

    Colloid retardation is influenced by the attachment and detachment of colloids from immobile surfaces. This analysis demonstrates the development of parameters necessary to estimate attachment and detachment of colloids and, hence, retardation in both fractured tuff and porous alluvium. Field and experimental data specific to fractured tuff are used for the analysis of colloid retardation in fractured tuff. Experimental data specific to colloid transport in alluvial material from Yucca Mountain as well as bacteriophage field studies in alluvial material, which are thought to be good analogs for colloid transport, are used to estimate attachment and detachment of colloids in the alluvial material. There are no alternative scientific approaches or technical methods for calculating these retardation factors.

  11. Microfluidic colloid filtration

    NASA Astrophysics Data System (ADS)

    Linkhorst, John; Beckmann, Torsten; Go, Dennis; Kuehne, Alexander J. C.; Wessling, Matthias

    2016-03-01

    Filtration of natural and colloidal matter is an essential process in today’s water treatment processes. The colloidal matter is retained with the help of micro- and nanoporous synthetic membranes. Colloids are retained in a “cake layer” – often coined fouling layer. Membrane fouling is the most substantial problem in membrane filtration: colloidal and natural matter build-up leads to an increasing resistance and thus decreasing water transport rate through the membrane. Theoretical models exist to describe macroscopically the hydrodynamic resistance of such transport and rejection phenomena; however, visualization of the various phenomena occurring during colloid retention is extremely demanding. Here we present a microfluidics based methodology to follow filter cake build up as well as transport phenomena occuring inside of the fouling layer. The microfluidic colloidal filtration methodology enables the study of complex colloidal jamming, crystallization and melting processes as well as translocation at the single particle level.

  12. Fluid dynamics of bacterial turbulence.

    PubMed

    Dunkel, Jörn; Heidenreich, Sebastian; Drescher, Knut; Wensink, Henricus H; Bär, Markus; Goldstein, Raymond E

    2013-05-31

    Self-sustained turbulent structures have been observed in a wide range of living fluids, yet no quantitative theory exists to explain their properties. We report experiments on active turbulence in highly concentrated 3D suspensions of Bacillus subtilis and compare them with a minimal fourth-order vector-field theory for incompressible bacterial dynamics. Velocimetry of bacteria and surrounding fluid, determined by imaging cells and tracking colloidal tracers, yields consistent results for velocity statistics and correlations over 2 orders of magnitude in kinetic energy, revealing a decrease of fluid memory with increasing swimming activity and linear scaling between kinetic energy and enstrophy. The best-fit model allows for quantitative agreement with experimental data.

  13. Phosphate binding by natural iron-rich colloids in streams.

    PubMed

    Baken, Stijn; Moens, Claudia; van der Grift, Bas; Smolders, Erik

    2016-07-01

    Phosphorus (P) in natural waters may be bound to iron (Fe) bearing colloids. However, the natural variation in composition and P binding strength of these colloids remain unclear. We related the composition of "coarse colloids" (colloids in the 0.1-1.2 μm size range) in 47 Belgian streams to the chemical properties of the streamwater. On average, 29% of the P in filtered (<1.2 μm) samples of these streams is present in coarse colloids. The concentration of Fe-rich colloids in streams decreases with increasing water hardness and pH. The P bearing colloids in these streams mostly consist of Fe hydroxyphosphates and of Fe oxyhydroxides with surface adsorbed P, which is underpinned by geochemical speciation calculations. In waters with molar P:Fe ratios above 0.5, only a minor part of the P is bound to coarse colloids. In such waters, the colloids have molar P:Fe ratios between 0.2 and 1 and are, therefore, nearly saturated with P. Conversely, in streams with molar P:Fe ratios below 0.1, most of the P is bound to Fe-rich colloids. Equilibration of synthetic and natural Fe and P bearing colloids with a zero sink reveals that colloids with low molar P:Fe ratios contain mostly nonlabile P, whereas P-saturated colloids contain mostly labile P which can be released within 7 days. Equilibration at a fixed free orthophosphate activity shows that the Fe-rich colloids may bind only limited P through surface adsorption, in the range of 0.02-0.04 mol P (mol Fe)(-1). The P:Fe ratios measured in naturally occurring Fe and P bearing colloids is clearly higher (between 0.05 and 1). These colloids are therefore likely formed by coprecipitation of P during oxidation of Fe(II), which leads to the formation of Fe hydroxyphosphate minerals.

  14. Young asteroidal fluid activity revealed by absolute age from apatite in carbonaceous chondrite

    PubMed Central

    Zhang, Ai-Cheng; Li, Qiu-Li; Yurimoto, Hisayoshi; Sakamoto, Naoya; Li, Xian-Hua; Hu, Sen; Lin, Yang-Ting; Wang, Ru-Cheng

    2016-01-01

    Chondritic meteorites, consisting of the materials that have formed in the early solar system (ESS), have been affected by late thermal events and fluid activity to various degrees. Determining the timing of fluid activity in ESS is of fundamental importance for understanding the nature, formation, evolution and significance of fluid activity in ESS. Previous investigations have determined the relative ages of fluid activity with short-lived isotope systematics. Here we report an absolute 207Pb/206Pb isochron age (4,450±50 Ma) of apatite from Dar al Gani (DaG) 978, a type ∼3.5, ungrouped carbonaceous chondrite. The petrographic, mineralogical and geochemical features suggest that the apatite in DaG 978 should have formed during metamorphism in the presence of a fluid. Therefore, the apatite age represents an absolute age for fluid activity in an asteroidal setting. An impact event could have provided the heat to activate this young fluid activity in ESS. PMID:27682449

  15. Aggregation and Gelation of Anisometric Colloidal Particles

    NASA Astrophysics Data System (ADS)

    Mohraz, Ali; Solomon, Michael J.

    2002-11-01

    The quiescent and flow-induced structure and dynamics of colloidal aggregates and gels of anisometric particles are studied by means of static and dynamic light scattering. Ground-based studies of weak gels are possible due to the submicron size of the boehmite rod suspensions investigated; however, microgravity conditions would be required for more general studies. The properties of colloidal rod suspensions are compared to typical properties of spherical particle gels to understand the role of anisotropic excluded volume on gel structure and dynamics. The structure and dynamics of colloidal aggregates and gels have long been of scientific and technological interest; however, most research has focused on suspensions of spherical particles. Yet, aggregates and gels of anisometric particles - colloidal rods and platelets - may exhibit structure and dynamics that are quite different from spherical colloids. For example, suspensions of colloidal rods gel at extremely low volume fractions and form birefringent sediments. The rheology of solutions and gels of colloidal rods and platelets differs dramatically from that of colloidal spheres. Scientifically, studies with anisometric particles offer the opportunity to assess the role of anisotropic excluded volume and particle orientation in aggregates and gels. Technologically, anisometric colloids find use in a wide range of materials such as ceramics, polymer nanocomposites, well-bore drilling fluids and magnetic storage media. Model colloidal boehmite rods of approximately monodisperse dimension and aspect ratio have been synthesized according to the method of Philipse and coworkers. In aqueous solution, these materials undergo gelation upon the addition of divalent salt. By means of a novel grafting reaction and procedure for solvent refractive index matching, the rods have also been dispersed in mixed organic solvents. In this case, gelation is induced by means of depletion interaction. We report the effect of

  16. Physics in ordered and disordered colloidal matter composed of poly(N-isopropylacrylamide) microgel particles.

    PubMed

    Yunker, Peter J; Chen, Ke; Gratale, Matthew D; Lohr, Matthew A; Still, Tim; Yodh, A G

    2014-05-01

    This review collects and describes experiments that employ colloidal suspensions to probe physics in ordered and disordered solids and related complex fluids. The unifying feature of this body of work is its clever usage of poly(N-isopropylacrylamide) (PNIPAM) microgel particles. These temperature-sensitive colloidal particles provide experimenters with a 'knob' for in situ control of particle size, particle interaction and particle packing fraction that, in turn, influence the structural and dynamical behavior of the complex fluids and solids. A brief summary of PNIPAM particle synthesis and properties is given, followed by a synopsis of current activity in the field. The latter discussion describes a variety of soft matter investigations including those that explore formation and melting of crystals and clusters, and those that probe structure, rearrangement and rheology of disordered (jammed/glassy) and partially ordered matter. The review, therefore, provides a snapshot of a broad range of physics phenomenology which benefits from the unique properties of responsive microgel particles.

  17. Linked topological colloids in a nematic host.

    PubMed

    Martinez, Angel; Hermosillo, Leonardo; Tasinkevych, Mykola; Smalyukh, Ivan I

    2015-04-14

    Geometric shape and topology of constituent particles can alter many colloidal properties such as Brownian motion, self-assembly, and phase behavior. Thus far, only single-component building blocks of colloids with connected surfaces have been studied, although topological colloids, with constituent particles shaped as freestanding knots and handlebodies of different genus, have been recently introduced. Here we develop a topological class of colloids shaped as multicomponent links. Using two-photon photopolymerization, we fabricate colloidal microparticle analogs of the classic examples of links studied in the field of topology, the Hopf and Solomon links, which we disperse in nematic fluids that possess orientational ordering of anisotropic rod-like molecules. The surfaces of these particles are treated to impose tangential or perpendicular boundary conditions for the alignment of liquid crystal molecules, so that they generate a host of topologically nontrivial field and defect structures in the dispersing nematic medium, resulting in an elastic coupling between the linked constituents. The interplay between the topologies of surfaces of linked colloids and the molecular alignment field of the nematic host reveals that linking of particle rings with perpendicular boundary conditions is commonly accompanied by linking of closed singular defect loops, laying the foundations for fabricating complex composite materials with interlinking-based structural organization.

  18. Saturated Zone Colloid Transport

    SciTech Connect

    H. S. Viswanathan

    2004-10-07

    This scientific analysis provides retardation factors for colloids transporting in the saturated zone (SZ) and the unsaturated zone (UZ). These retardation factors represent the reversible chemical and physical filtration of colloids in the SZ. The value of the colloid retardation factor, R{sub col} is dependent on several factors, such as colloid size, colloid type, and geochemical conditions (e.g., pH, Eh, and ionic strength). These factors are folded into the distributions of R{sub col} that have been developed from field and experimental data collected under varying geochemical conditions with different colloid types and sizes. Attachment rate constants, k{sub att}, and detachment rate constants, k{sub det}, of colloids to the fracture surface have been measured for the fractured volcanics, and separate R{sub col} uncertainty distributions have been developed for attachment and detachment to clastic material and mineral grains in the alluvium. Radionuclides such as plutonium and americium sorb mostly (90 to 99 percent) irreversibly to colloids (BSC 2004 [DIRS 170025], Section 6.3.3.2). The colloid retardation factors developed in this analysis are needed to simulate the transport of radionuclides that are irreversibly sorbed onto colloids; this transport is discussed in the model report ''Site-Scale Saturated Zone Transport'' (BSC 2004 [DIRS 170036]). Although it is not exclusive to any particular radionuclide release scenario, this scientific analysis especially addresses those scenarios pertaining to evidence from waste-degradation experiments, which indicate that plutonium and americium may be irreversibly attached to colloids for the time scales of interest. A section of this report will also discuss the validity of using microspheres as analogs to colloids in some of the lab and field experiments used to obtain the colloid retardation factors. In addition, a small fraction of colloids travels with the groundwater without any significant retardation

  19. Characterization of the Colloidal Properties, In vitro Antifungal Activity, Antileishmanial Activity and Toxicity in Mice of a Distigmasterylhemisuccinoyl-glycerophosphocholine Liposome-Intercalated Amphotericin B

    PubMed Central

    Iman, Maryam; Huang, Zhaohua; Szoka, Francis C.; Jaafari, Mahmoud R.

    2011-01-01

    1,2-Distigmasterylhemisuccinoyl-sn-glycero-3-phosphocholine (DSHemsPC) is a new lipid in which two molecules of stigmasterol (an inexpensive plant sterol) are covalently linked via a succinic acid to glycerophosphocholine. Since amphotericin B (AmB) interacts with sterols, we postulated that DSHemsPC could be used in AmB liposome formulations. Thirty-two DSHemsPC-AmB formulations were prepared using various mole ratios of DSHemsPC, phosphatidylcholine and phosphatidylglycerol at different pH. Most formulations had physical properties similar to AmBisome™: a particle diameter of about 100 nm, a monomodal distribution and a negative zeta potential. The red blood cell potassium release (RBCPR) IC50s for formulations spanned a range, with some being comparable to or greater than the IC50 observed using AmBisome™. A number of formulations had superior in vitro antifungal activity compared to AmBisome™. against all of the tested pathogenic yeasts and molds. The IC50s of formulations against L. major promastigotes and amastigotes for certain formulations were comparable with AmBisome™ and Fungizone™. Most formulations had maximum tolerated intravenous doses (MTD) of less than 10 mg/kg. However the formulation consisting of DSHemsPC/DMPC/DMPG/AmB mole ratio 1.25/5.0/1.5/1.0 (prepared at pH 5.5) had excellent colloidal properties, a high IC50 for RBCPR, antifungal and antileishmanial activity similar to AmBisome™ and an MTD of 60 mg/kg. The characteristics of this DSHemsPC/DMPC/DMPG/AmB formulation make it suitable for further investigation to treat AmB-responsive pathogens. PMID:21277963

  20. Statistical thermodynamics of charge-stabilized colloids

    NASA Astrophysics Data System (ADS)

    Torres Valderrama, A.

    2008-06-01

    This thesis is a theoretical study of equilibrium statistical thermodynamic properties of colloidal systems in which electrostatic interactions play a dominant role, namely, charge-stabilized colloidal suspensions. Such systems are fluids consisting of a mixture of a large number of mesoscopic particles and microscopic ions which interact via the Coulomb force, suspended in a molecular fluid. Quantum statistical mechanics is essential to fully understand the properties and stability of such systems. A less fundamental but for many purposes, sufficient description, is provided by classical statistical mechanics. In such approximation the system is considered as composed of a great number of charged classical particles with additional hard-core repulsions. The kinetic energy or momentum integrals become independent Gaussians, and hence their contribution to the free energy can be trivially evaluated. The contribution of the potential energy to the free energy on the other hand, depends upon the configuration of all the particles and becomes highly non-trivial due to the long-range character of the Coulomb force and the extremely different length scales involved in the problem. Using the microscopic model described above, we focus on the calculation of equilibrium thermodynamic properties (response functions), correlations (structure factors), and mechanical properties (forces and stresses), which can be measured in experiments and computed by Monte Carlo simulations. This thesis is divided into three parts. In part I, comprising chapters 2 and 3, we focus on finite-thickness effects in colloidal platelets and rigid planar membranes. In chapter 2 we study electrolyte-mediated interactions between two of such colloidal objects. Several aspects of these interactions are considered including the nature (attractive or repulsive) of the force between the objects, the osmotic properties for different types of surfaces and image charge effects. In part II, which includes

  1. Development and testing of heat transport fluids for use in active solar heating and cooling systems

    NASA Technical Reports Server (NTRS)

    Parker, J. C.

    1981-01-01

    Work on heat transport fluids for use with active solar heating and cooling systems is described. Program objectives and how they were accomplished including problems encountered during testing are discussed.

  2. Ring around the colloid

    NASA Astrophysics Data System (ADS)

    Cavallaro, Marcello, Jr.; Gharbi, Mohamed A.; Beller, Daniel A.; Čopar, Simon; Shi, Zheng; Kamien, Randall D.; Yang, Shu; Baumgart, Tobias; Stebe, Kathleen J.

    In this work, we show that Janus washers, genus-one colloids with hybrid anchoring conditions, form topologically required defects in nematic liquid crystals. Experiments under crossed polarizers reveal the defect structure to be a rigid disclination loop confined within the colloid, with an accompanying defect in the liquid crystal. When confined to a homeotropic cell, the resulting colloid-defect ring pair tilts relative to the far field director, in contrast to the behavior of toroidal colloids with purely homeotropic anchoring. We show that this tilting behavior can be reversibly suppressed by the introduction of a spherical colloid into the center of the toroid, creating a new kind of multi-shape colloidal assemblage.

  3. Physics of Colloids in Space: Flight Hardware Operations on ISS

    NASA Technical Reports Server (NTRS)

    Doherty, Michael P.; Bailey, Arthur E.; Jankovsky, Amy L.; Lorik, Tibor

    2002-01-01

    The Physics of Colloids in Space (PCS) experiment was launched on Space Shuttle STS-100 in April 2001 and integrated into EXpedite the PRocess of Experiments to Space Station Rack 2 on the International Space Station (ISS). This microgravity fluid physics investigation is being conducted in the ISS U.S. Lab 'Destiny' Module over a period of approximately thirteen months during the ISS assembly period from flight 6A through flight 9A. PCS is gathering data on the basic physical properties of simple colloidal suspensions by studying the structures that form. A colloid is a micron or submicron particle, be it solid, liquid, or gas. A colloidal suspension consists of these fine particles suspended in another medium. Common colloidal suspensions include paints, milk, salad dressings, cosmetics, and aerosols. Though these products are routinely produced and used, we still have much to learn about their behavior as well as the underlying properties of colloids in general. The long-term goal of the PCS investigation is to learn how to steer the growth of colloidal structures to create new materials. This experiment is the first part of a two-stage investigation conceived by Professor David Weitz of Harvard University (the Principal Investigator) along with Professor Peter Pusey of the University of Edinburgh (the Co-Investigator). This paper describes the flight hardware, experiment operations, and initial science findings of the first fluid physics payload to be conducted on ISS: The Physics of Colloids in Space.

  4. Equivalent metabolic acidosis with four colloids and saline on ex vivo haemodilution.

    PubMed

    Morgan, T J; Vellaichamy, M; Cowley, D M; Weier, S L; Venkatesh, B; Jones, M A

    2009-05-01

    Colloid infusions can cause metabolic acidosis. Mechanisms and relative severity with different colloids are incompletely understood. We compared haemodilution acid-base effects of 4% albumin, 3.5% polygeline, 4% succinylated gelatin (all weak acid colloids, strong ion difference 12 mEq/l, 17.6 mEq/l and 34 mEq/l respectively), 6% hetastarch (non-weak acid colloid, strong ion difference zero) and 0.9% saline (crystalloid, strong ion difference zero). Gelatin weak acid properties were tracked via the strong ion gap. Four-step ex vivo dilutions of pre-oxygenated human venous blood were performed to a final [Hb] near 50% baseline. With each fluid, base excess fell to approximately -13 mEq/l. Base excess/[Hb] relationships across dilution were linear and direct (R2 > or = 0.96), slopes and intercepts closely resembling saline. Baseline strong ion gap was -0.3 (2.1) mEq/l. Post-dilution increases occurred in three groups: small with saline, hetastarch and albumin (to 3.5 (02) mEq/l, 4.3 (0.3) mEq/l, 3.3 (1.4) mEq/l respectively), intermediate with polygeline (to 12.2 (0.9) mEq/l) and greatest with succinylated gelatin (to 20.8 (1.4) mEq/l). We conclude that, despite colloid weak acid activity ranging from zero (hydroxyethyl starch) to greater than that of albumin with both gelatin preparations, ex vivo dilution causes a metabolic acidosis of identical severity to saline in each case. This uniformity reflects modifications to the albumin and gelatin saline vehicles, in part aimed at pH correction. By proportionally increasing the strong ion difference, these modifications counter deviations from pure saline effects caused by colloid weak acid activity. Extrapolation in vivo requires further investigation.

  5. Activated dynamics in dense fluids of attractive nonspherical particles. I. Kinetic crossover, dynamic free energies, and the physical nature of glasses and gels

    NASA Astrophysics Data System (ADS)

    Tripathy, Mukta; Schweizer, Kenneth S.

    2011-04-01

    We apply the center-of-mass versions of naïve mode coupling theory and nonlinear Langevin equation theory to study how short-range attractive interactions modify the onset of localization, activated single-particle dynamics, and the physical nature of the transiently arrested state of a variety of dense nonspherical particle fluids (and the spherical analog) as a function of volume fraction and attraction strength. The form of the dynamic crossover boundary depends on particle shape, but the reentrant glass-fluid-gel phenomenon and the repulsive glass-to-attractive glass crossover always occur. Diverse functional forms of the dynamic free energy are found for all shapes including glasslike, gel-like, a glass-gel form defined by the coexistence of two localization minima and two activation barriers, and a “mixed” attractive glass characterized by a single, very short localization length but an activation barrier located at a large displacement as in repulsive-force caged glasses. For the latter state, particle trajectories are expected to be of a two-step activated form and can be accessed at high attraction strength by increasing volume fraction, or by increasing attraction strength at fixed high enough volume fraction. A new classification scheme for slow dynamics of fluids of dense attractive particles is proposed based on specification of both the nature of the localized state and the particle displacements required to restore ergodicity via activated barrier hopping. The proposed physical picture appears to be in qualitative agreement with recent computer simulations and colloid experiments.

  6. UZ Colloid Transport Model

    SciTech Connect

    M. McGraw

    2000-04-13

    The UZ Colloid Transport model development plan states that the objective of this Analysis/Model Report (AMR) is to document the development of a model for simulating unsaturated colloid transport. This objective includes the following: (1) use of a process level model to evaluate the potential mechanisms for colloid transport at Yucca Mountain; (2) Provide ranges of parameters for significant colloid transport processes to Performance Assessment (PA) for the unsaturated zone (UZ); (3) Provide a basis for development of an abstracted model for use in PA calculations.

  7. Pituitary Colloid Cyst

    PubMed Central

    Guduk, Mustafa; Sun, Halil Ibrahim; Sav, Murat Aydin; Berkman, Zafer

    2017-01-01

    Abstract Colloid cysts appear most commonly in the third ventricle, their occurrence in the sellar region is uncommon. The authors report a female patient with a pituitary colloid cyst. She was diagnosed incidentally with a sellar lesion by a routine paranasal computed tomography examination performed for planning of a dental implant surgery. Radiologic examinations revealed a pituitary lesion that was removed by transnasal transsphenoidal route. Her pathologic examination revealed that the lesion was a colloid cyst. Although rare, colloid cysts should be considered in the differential diagnosis of pituitary lesions PMID:27792102

  8. Analysis of colloid transport

    SciTech Connect

    Travis, B.J.; Nuttall, H.E.

    1985-12-31

    The population balance methodology is described and applied to the transport and capture of polydispersed colloids in packed columns. The transient model includes particle growth, capture, convective transport, and dispersion. We also follow the dynamic accumulation of captured colloids on the solids. The multidimensional parabolic partial differential equation was solved by a recently enhanced method of characteristics technique. This computational technique minimized numerical dispersion and is computationally very fast. The FORTRAN 77 code ran on a VAX-780 in less than a minute and also runs on an IBM-AT using the Professional FORTRAN compiler. The code was extensively tested against various simplified cases and against analytical models. The packed column experiments by Saltelli et al. were re-analyzed incorporating the experimentally reported size distribution of the colloid feed material. Colloid capture was modeled using a linear size dependent filtration function. The effects of a colloid size dependent filtration factor and various initial colloid size distributions on colloid migration and capture were investigated. Also, we followed the changing colloid size distribution as a function of position in the column. Some simple arguments are made to assess the likelihood of colloid migration at a potential NTS Yucca Mountain waste disposal site. 10 refs., 3 figs., 1 tab.

  9. Recovery of Alkylation Activity in Deactivated USY Catalyst Using Supercritical Fluids: A Comparison of Light Hydrocarbons

    SciTech Connect

    Daniel M. Ginosar; David N. Thompson; Kyle C. Burch

    2004-05-01

    Off-line, in-situ alkylation activity recovery from a completely deactivated solid acid catalyst was examined in a continuous-flow reaction system employing supercritical fluids (SCF). A USY zeolite catalyst was initially deactivated during the liquid phase alkylation of butene with isobutane in a single-pass reactor and then varying amounts of alkylation activity were recovered by passing supercritical fluids over the catalyst bed. A comparison of reactivation fluids on catalyst activity recovery is reported. Fluids examined included helium, propane, n-butane, isobutane, n-pentane, and isopentane. Phases studied included gas, liquid, and supercritical. As much as 82% of the fresh catalyst activity was recovered when employing supercritical isobutane. The ability of the fluid to facilitate a hydride reaction with the adsorbed deactivating high-molecular weight carbocations was indicated as an important property necessary to attain high levels of catalyst activity recovery. Activity recovery utilizing supercritical fluids that enhance reactivation by both reacting with and desorbing fouling compounds appears to be a promising technique to advance solid catalyst alkylation.

  10. Magnetic Assisted Colloidal Pattern Formation

    NASA Astrophysics Data System (ADS)

    Yang, Ye

    phase transitions in condensed matter systems that can be tracked with single particle resolution. Compared with other research on colloidal crystal formation, my research has focused on multi-component colloidal systems of magnetic and non-magnetic colloids immersed in a ferrofluid. Initially, I studied the types of patterns that form as a function of the concentrations of the different particles and ferrofluid, and I discovered a wide variety of chains, rings and crystals forming in bi-component and tri-component systems. Based on these results, I narrowed my focus to one specific crystal structure (checkerboard lattice) as a model of phase transformations in alloy. Liquid/solid phase transitions were studied by slowly adjusting the magnetic field strength, which serves to control particle-particle interactions in a manner similar to controlling the physical temperature of the fluid. These studies were used to determine the optimal conditions for forming large single crystal structures, and paved the way for my later work on solid/solid phase transitions when the angle of the external field was shifted away from the normal direction. The magnetostriction coefficient of these crystals was measured in low tilt angle of the applied field. At high tilt angles, I observed a variety of martensitic transformations, which followed different pathways depending on the crystal direction relative to the in-plane field. In the last part of my doctoral studies, I investigated colloidal patterns formed in a superimposed acoustic and magnetic field. In this approach, the magnetic field mimics "temperature", while the acoustic field mimics "pressure". The ability to simultaneously tune both temperature and pressure allows for more efficient exploration of phase space. With this technique I demonstrated a large class of particle structures ranging from discrete molecule-like clusters to well ordered crystal phases. Additionally, I demonstrated a crosslinking strategy based on

  11. Interface colloidal robotic manipulator

    DOEpatents

    Aronson, Igor; Snezhko, Oleksiy

    2015-08-04

    A magnetic colloidal system confined at the interface between two immiscible liquids and energized by an alternating magnetic field dynamically self-assembles into localized asters and arrays of asters. The colloidal system exhibits locomotion and shape change. By controlling a small external magnetic field applied parallel to the interface, structures can capture, transport, and position target particles.

  12. Applications of Geothermally-Produced Colloidal Silica in Reservoir Management - Smart Gels

    DOE Data Explorer

    Hunt, Jonathan

    2013-01-31

    In enhanced geothermal systems (EGS) the reservoir permeability is often enhanced or created using hydraulic fracturing. In hydraulic fracturing, high fluid pressures are applied to confined zones in the subsurface usually using packers to fracture the host rock. This enhances rock permeability and therefore conductive heat transfer to the circulating geothermal fluid (e.g. water or supercritical carbon dioxide). The ultimate goal is to increase or improve the thermal energy production from the subsurface by either optimal designs of injection and production wells or by altering the fracture permeability to create different zones of circulation that can be exploited in geothermal heat extraction. Moreover, hydraulic fracturing can lead to the creation of undesirable short-circuits or fast flow-paths between the injection and extraction wells leading to a short thermal residence time, low heat recovery, and thus a short-life of the EGS. A potential remedy to these problems is to deploy a cementing (blocking, diverting) agent to minimize short-cuts and/or create new circulation cells for heat extraction. A potential diverting agent is the colloidal silica by-product that can be co-produced from geothermal fluids. Silica gels are abundant in various surface and subsurface applications, yet they have not been evaluated for EGS applications. In this study we are investigating the benefits of silica gel deployment on thermal response of an EGS, either by blocking short-circuiting undesirable pathways as a result of diverting the geofluid to other fractures; or creating, within fractures, new circulation cells for harvesting heat through newly active surface area contact. A significant advantage of colloidal silica is that it can be co-produced from geothermal fluids using an inexpensive membrane-based separation technology that was developed previously using DOE-GTP funding. This co-produced silica has properties that potentially make it useful as a fluid diversion agent

  13. Driving magnetic colloidal polymers

    NASA Astrophysics Data System (ADS)

    Dempster, Joshua; Olvera de La Cruz, Monica

    Magnetic colloids are of growing interest for applications such as drug delivery and in vitro tissue growth. Recent experiments have synthesized 1D chains of magnetic colloids into permanent colloidal polymers. We study magnetic colloidal polymers theoretically and computationally under the influence of time-varying external fields and find a rich set of controllable, dynamic conformations. By iterating through a sequence of conformations, these polymers can perform mechanical functions. We discuss possible roles for these polymers beyond those considered for single colloids. This work was supported as part of the Center for Bio-Inspired Energy Science, an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Basic Energy Sciences under Award # DE-SC0000989.

  14. Colloidal characterization of silicon nitride and silicon carbide

    NASA Technical Reports Server (NTRS)

    Feke, Donald L.

    1986-01-01

    The colloidal behavior of aqueous ceramic slips strongly affects the forming and sintering behavior and the ultimate mechanical strength of the final ceramic product. The colloidal behavior of these materials, which is dominated by electrical interactions between the particles, is complex due to the strong interaction of the solids with the processing fluids. A surface titration methodology, modified to account for this interaction, was developed and used to provide fundamental insights into the interfacial chemistry of these systems. Various powder pretreatment strategies were explored to differentiate between true surface chemistry and artifacts due to exposure history. The colloidal behavior of both silicon nitride and carbide is dominated by silanol groups on the powder surfaces. However, the colloid chemistry of silicon nitride is apparently influenced by an additional amine group. With the proper powder treatments, silicon nitride and carbide powder can be made to appear colloidally equivalent. The impact of these results on processing control will be discussed.

  15. Quasicrystalline tilings with nematic colloidal platelets

    PubMed Central

    Dontabhaktuni, Jayasri; Ravnik, Miha; Žumer, Slobodan

    2014-01-01

    Complex nematic fluids have the remarkable capability for self-assembling regular colloidal structures of various symmetries and dimensionality according to their micromolecular orientational order. Colloidal chains, clusters, and crystals were demonstrated recently, exhibiting soft-matter functionalities of robust binding, spontaneous chiral symmetry breaking, entanglement, shape-driven and topological driven assembly, and even memory imprinting. However, no quasicrystalline structures were found. Here, we show with numerical modeling that quasicrystalline colloidal lattices can be achieved in the form of original Penrose P1 tiling by using pentagonal colloidal platelets in layers of nematic liquid crystals. The tilings are energetically stabilized with binding energies up to 2500 kBT for micrometer-sized platelets and further allow for hierarchical substitution tiling, i.e., hierarchical pentagulation. Quasicrystalline structures are constructed bottom-up by assembling the boat, rhombus, and star maximum density clusters, thus avoiding other (nonquasicrystalline) stable or metastable configurations of platelets. Central to our design of the quasicrystalline tilings is the symmetry breaking imposed by the platelet shape and the surface anchoring conditions at the colloidal platelets, which are misaligning and asymmetric over two perpendicular mirror planes. Finally, the design of the quasicrystalline tilings as platelets in nematic liquid crystals is inherently capable of a continuous variety of length scales of the tiling, ranging over three orders of magnitude in the typical length (from to ), which could allow for the design of quasicrystalline photonics at multiple frequency ranges. PMID:24550269

  16. Method for electrohydrodynamically assembling patterned colloidal structures

    NASA Technical Reports Server (NTRS)

    Trau, Mathias (Inventor); Aksay, Ilhan A. (Inventor); Saville, Dudley A. (Inventor)

    1999-01-01

    A method apparatus is provided for electrophoretically depositing particles onto an electrode, and electrohydrodynamically assembling the particles into crystalline structures. Specifically, the present method and apparatus creates a current flowing through a solution to cause identically charged electrophoretically deposited colloidal particles to attract each other over very large distances (<5 particle diameters) on the surface of electrodes to form two-dimensional colloidal crystals. The attractive force can be created with both DC and AC fields and can modulated by adjusting either the field strength or frequency of the current. Modulating this lateral attraction between the particles causes the reversible formation of two-dimensional fluid and crystalline colloidal states on the electrode surface. Further manipulation allows for the formation of two or three-dimensional colloidal crystals, as well as more complex designed structures. Once the required structures are formed, these three-dimension colloidal crystals can be permanently frozen or glued by controlled coagulation induced by to the applied field to form a stable crystalline structure.

  17. Apparatus for electrohydrodynamically assembling patterned colloidal structures

    NASA Technical Reports Server (NTRS)

    Trau, Mathias (Inventor); Aksay, Ilhan A. (Inventor); Saville, Dudley A. (Inventor)

    2000-01-01

    A method apparatus is provided for electrophoretically depositing particles onto an electrode, and electrohydrodynamically assembling the particles into crystalline structures. Specifically, the present method and apparatus creates a current flowing through a solution to cause identically charged electrophoretically deposited colloidal particles to attract each other over very large distances (<5 particle diameters) on the surface of electrodes to form two-dimensional colloidal crystals. The attractive force can be created with both DC and AC fields and can modulated by adjusting either the field strength or frequency of the current. Modulating this lateral attraction between the particles causes the reversible formation of two-dimensional fluid and crystalline colloidal states on the electrode surface. Further manipulation allows for the formation of two or three-dimensional colloidal crystals, as well as more complex designed structures. Once the required structures are formed, these three-dimension colloidal crystals can be permanently frozen or glued by controlled coagulation induced by to the applied field to form a stable crystalline structure.

  18. Colloidal and antibacterial properties of novel triple-headed, double-tailed amphiphiles: exploring structure-activity relationships and synergistic mixtures.

    PubMed

    Marafino, John N; Gallagher, Tara M; Barragan, Jhosdyn; Volkers, Brandi L; LaDow, Jade E; Bonifer, Kyle; Fitzgerald, Gabriel; Floyd, Jason L; McKenna, Kristin; Minahan, Nicholas T; Walsh, Brenna; Seifert, Kyle; Caran, Kevin L

    2015-07-01

    Two novel series of tris-cationic, tripled-headed, double-tailed amphiphiles were synthesized and the effects of tail length and head group composition on the critical aggregation concentration (CAC), thermodynamic parameters, and minimum inhibitory concentration (MIC) against six bacterial strains were investigated. Synergistic antibacterial combinations of these amphiphiles were also identified. Amphiphiles in this study are composed of a benzene core with three benzylic ammonium bromide groups, two of which have alkyl chains, each 8-16 carbons in length. The third head group is a trimethylammonium or pyridinium. Log of critical aggregation concentration (log[CAC]) and heat of aggregation (ΔHagg) were both inversely proportional to the length of the linear hydrocarbon chains. Antibacterial activity increases with tail length until an optimal tail length of 12 carbons per chain, above which, activity decreased. The derivatives with two 12 carbon chains had the best antibacterial activity, killing all tested strains at concentrations of 1-2μM for Gram-positive and 4-16μM for Gram-negative bacteria. The identity of the third head group (trimethylammonium or pyridinium) had minimal effect on colloidal and antibacterial activity. The antibacterial activity of several binary combinations of amphiphiles from this study was higher than activity of individual amphiphiles, indicating that these combinations are synergistic. These amphiphiles show promise as novel antibacterial agents that could be used in a variety of applications.

  19. Organic molecules as tools to control the growth, surface structure, and redox activity of colloidal quantum dots.

    PubMed

    Weiss, Emily A

    2013-11-19

    In order to achieve efficient and reliable technology that can harness solar energy, the behavior of electrons and energy at interfaces between different types or phases of materials must be understood. Conversion of light to chemical or electrical potential in condensed phase systems requires gradients in free energy that allow the movement of energy or charge carriers and facilitate redox reactions and dissociation of photoexcited states (excitons) into free charge carriers. Such free energy gradients are present at interfaces between solid and liquid phases or between inorganic and organic materials. Nanostructured materials have a higher density of these interfaces than bulk materials. Nanostructured materials, however, have a structural and chemical complexity that does not exist in bulk materials, which presents a difficult challenge: to lower or eliminate energy barriers to electron and energy flux that inevitably result from forcing different materials to meet in a spatial region of atomic dimensions. Chemical functionalization of nanostructured materials is perhaps the most versatile and powerful strategy for controlling the potential energy landscape of their interfaces and for minimizing losses in energy conversion efficiency due to interfacial structural and electronic defects. Colloidal quantum dots are semiconductor nanocrystals synthesized with wet-chemical methods and coated in organic molecules. Chemists can use these model systems to study the effects of chemical functionalization of nanoscale organic/inorganic interfaces on the optical and electronic properties of a nanostructured material, and the behavior of electrons and energy at interfaces. The optical and electronic properties of colloidal quantum dots have an intense sensitivity to their surface chemistry, and their organic adlayers make them dispersible in solvent. This allows researchers to use high signal-to-noise solution-phase spectroscopy to study processes at interfaces. In this

  20. Neuraminidase Activity and Resistance of 2009 Pandemic H1N1 Influenza Virus to Antiviral Activity in Bronchoalveolar Fluid

    PubMed Central

    Ruangrung, Kanyarat; Suptawiwat, Ornpreya; Maneechotesuwan, Kittipong; Boonarkart, Chompunuch; Chakritbudsabong, Warunya; Assawabhumi, Jirawatna; Bhattarakosol, Parvapan; Uiprasertkul, Mongkol; Puthavathana, Pilaipan; Wiriyarat, Witthawat; Jongkaewwattana, Anan

    2016-01-01

    ABSTRACT Human bronchoalveolar fluid is known to have anti-influenza activity. It is believed to be a frontline innate defense against the virus. Several antiviral factors, including surfactant protein D, are believed to contribute to the activity. The 2009 pandemic H1N1 influenza virus was previously shown to be less sensitive to surfactant protein D. Nevertheless, whether different influenza virus strains have different sensitivities to the overall anti-influenza activity of human bronchoalveolar fluid was not known. We compared the sensitivities of 2009 pandemic H1N1, seasonal H1N1, and seasonal H3N2 influenza virus strains to inhibition by human bronchoalveolar lavage (BAL) fluid. The pandemic and seasonal H1N1 strains showed lower sensitivity to human BAL fluid than the H3N2 strains. The BAL fluid anti-influenza activity could be enhanced by oseltamivir, indicating that the viral neuraminidase (NA) activity could provide resistance to the antiviral defense. In accordance with this finding, the BAL fluid anti-influenza activity was found to be sensitive to sialidase. The oseltamivir resistance mutation H275Y rendered the pandemic H1N1 virus but not the seasonal H1N1 virus more sensitive to BAL fluid. Since only the seasonal H1N1 but not the pandemic H1N1 had compensatory mutations that allowed oseltamivir-resistant strains to maintain NA enzymatic activity and transmission fitness, the resistance to BAL fluid of the drug-resistant seasonal H1N1 virus might play a role in viral fitness. IMPORTANCE Human airway secretion contains anti-influenza activity. Different influenza strains may vary in their susceptibilities to this antiviral activity. Here we show that the 2009 pandemic and seasonal H1N1 influenza viruses were less sensitive to human bronchoalveolar lavage (BAL) fluid than H3N2 seasonal influenza virus. The resistance to the pulmonary innate antiviral activity of the pandemic virus was determined by its neuraminidase (NA) gene, and it was shown that the

  1. Detachment of colloids from a solid surface by a moving air-water interface.

    PubMed

    Sharma, Prabhakar; Flury, Markus; Zhou, Jun

    2008-10-01

    Colloid attachment to liquid-gas interfaces is an important process used in industrial applications to separate suspended colloids from the fluid phase. Moving gas bubbles can also be used to remove colloidal dust from surfaces. Similarly, moving liquid-gas interfaces lead to colloid mobilization in the natural subsurface environment, such as in soils and sediments. The objective of this study was to quantify the effect of moving air-water interfaces on the detachment of colloids deposited on an air-dried glass surface, as a function of colloidal properties and interface velocity. We selected four types of polystyrene colloids (positive and negative surface charge, hydrophilic and hydrophobic). The colloids were deposited on clean microscope glass slides using a flow-through deposition chamber. Air-water interfaces were passed over the colloid-deposited glass slides, and we varied the number of passages and the interface velocity. The amounts of colloids deposited on the glass slides were visualized using confocal laser scanning microscopy and quantified by image analysis. Our results showed that colloids attached under unfavorable conditions were removed in significantly greater amounts than those attached under favorable conditions. Hydrophobic colloids were detached more than hydrophilic colloids. The effect of the air-water interface on colloid removal was most pronounced for the first two passages of the air-water interface. Subsequent passages of air-water interfaces over the colloid-deposited glass slides did not cause significant additional colloid removal. Increasing interface velocity led to decreased colloid removal. The force balances, calculated from theory, supported the experimental findings, and highlight the dominance of detachment forces (surface tension forces) over the attachment forces (DLVO forces).

  2. Metabolic Potential and Activity in Fluids of the Coast Range Ophiolite Microbial Observatory, California, USA

    NASA Technical Reports Server (NTRS)

    Hoehler, T.; Som, S.; Schrenk, M.; McCollom, T.; Cardace, D.

    2016-01-01

    Metabolic potential and activity associated with hydrogen and carbon monoxide were characterized in fluids sampled from the the Coast Range Ophiolite Microbial Observatory (CROMO). CROMO consists of two clusters of science-dedicated wells drilled to varying depths up to 35m in the actively serpentinizing, Jurassic-age Coast Range Ophiolite of Northern California, along with a suite of pre-existing monitoring wells at the same site. Consistent with the fluid chemistry observed in other serpentinizing systems, CROMO fluids are highly alkaline, with pH up to 12.5, high in methane, with concentrations up 1600 micromolar, and low in dissolved inorganic carbon (DIC), with concentrations of 10's to 100's of micromolar. CROMO is conspicuous for fluid H2 concentrations that are consistently sub-micromolar, orders of magnitude lower than is typical of other systems. However, higher H2 concentrations (10's -100's of micromolar) at an earlier stage of fluid chemical evolution are predicted by, or consistent with: thermodynamic models for fluid chemistry based on parent rock composition equivalent to local peridotite and with water:rock ratio constrained by observed pH; the presence of magnetite at several wt% in CROMO drill cores; and concentrations of formate and carbon monoxide that would require elevated H2 if formed in equilibrium with H2 and DIC. Calculated Gibbs energy changes for reaction of H2 and CO in each of several metabolisms, across the range of fluid composition encompassed by the CROMO wells, range from bioenergetically feasible (capable of driving ATP synthesis) to thermodynamically unfavorable. Active consumption relative to killed controls was observed for both CO and H2 during incubation of fluids from the pre-existing monitoring wells; in incubations of freshly cored solids, consumption was only observed in one sample set (corresponding to the lowest pH) out of three. The specific metabolisms by which H2 and CO are consumed remain to be determined.

  3. Nanocalorimetric Characterization of Microbial Activity in Deep Subsurface Oceanic Crustal Fluids.

    PubMed

    Robador, Alberto; LaRowe, Douglas E; Jungbluth, Sean P; Lin, Huei-Ting; Rappé, Michael S; Nealson, Kenneth H; Amend, Jan P

    2016-01-01

    Although fluids within the upper oceanic basaltic crust harbor a substantial fraction of the total prokaryotic cells on Earth, the energy needs of this microbial population are unknown. In this study, a nanocalorimeter (sensitivity down to 1.2 nW ml(-1)) was used to measure the enthalpy of microbially catalyzed reactions as a function of temperature in samples from two distinct crustal fluid aquifers. Microorganisms in unamended, warm (63°C) and geochemically altered anoxic fluids taken from 292 meters sub-basement (msb) near the Juan de Fuca Ridge produced 267.3 mJ of heat over the course of 97 h during a step-wise isothermal scan from 35.5 to 85.0°C. Most of this heat signal likely stems from the germination of thermophilic endospores (6.66 × 10(4) cells ml(-1) FLUID) and their subsequent metabolic activity at temperatures greater than 50°C. The average cellular energy consumption (5.68 pW cell(-1)) reveals the high metabolic potential of a dormant community transported by fluids circulating through the ocean crust. By contrast, samples taken from 293 msb from cooler (3.8°C), relatively unaltered oxic fluids, produced 12.8 mJ of heat over the course of 14 h as temperature ramped from 34.8 to 43.0°C. Corresponding cell-specific energy turnover rates (0.18 pW cell(-1)) were converted to oxygen uptake rates of 24.5 nmol O2 ml(-1) FLUID d(-1), validating previous model predictions of microbial activity in this environment. Given that the investigated fluids are characteristic of expansive areas of the upper oceanic crust, the measured metabolic heat rates can be used to constrain boundaries of habitability and microbial activity in the oceanic crust.

  4. Probing the structural dependency of photoinduced properties of colloidal quantum dots using metal-oxide photo-active substrates

    SciTech Connect

    Patty, Kira; Campbell, Quinn; Hamilton, Nathan; West, Robert G.; Sadeghi, Seyed M.; Mao, Chuanbin

    2014-09-21

    We used photoactive substrates consisting of about 1 nm coating of a metal oxide on glass substrates to investigate the impact of the structures of colloidal quantum dots on their photophysical and photochemical properties. We showed during irradiation these substrates can interact uniquely with such quantum dots, inducing distinct forms of photo-induced processes when they have different cores, shells, or ligands. In particular, our results showed that for certain types of core-shell quantum dot structures an ultrathin layer of a metal oxide can reduce suppression of quantum efficiency of the quantum dots happening when they undergo extensive photo-oxidation. This suggests the possibility of shrinking the sizes of quantum dots without significant enhancement of their non-radiative decay rates. We show that such quantum dots are not influenced significantly by Coulomb blockade or photoionization, while those without a shell can undergo a large amount of photo-induced fluorescence enhancement via such blockade when they are in touch with the metal oxide.

  5. Probing the structural dependency of photoinduced properties of colloidal quantum dots using metal-oxide photo-active substrates

    NASA Astrophysics Data System (ADS)

    Patty, Kira; Sadeghi, Seyed M.; Campbell, Quinn; Hamilton, Nathan; West, Robert G.; Mao, Chuanbin

    2014-09-01

    We used photoactive substrates consisting of about 1 nm coating of a metal oxide on glass substrates to investigate the impact of the structures of colloidal quantum dots on their photophysical and photochemical properties. We showed during irradiation these substrates can interact uniquely with such quantum dots, inducing distinct forms of photo-induced processes when they have different cores, shells, or ligands. In particular, our results showed that for certain types of core-shell quantum dot structures an ultrathin layer of a metal oxide can reduce suppression of quantum efficiency of the quantum dots happening when they undergo extensive photo-oxidation. This suggests the possibility of shrinking the sizes of quantum dots without significant enhancement of their non-radiative decay rates. We show that such quantum dots are not influenced significantly by Coulomb blockade or photoionization, while those without a shell can undergo a large amount of photo-induced fluorescence enhancement via such blockade when they are in touch with the metal oxide.

  6. Elastically cooperative activated barrier hopping theory of relaxation in viscous fluids. I. General formulation and application to hard sphere fluids.

    PubMed

    Mirigian, Stephen; Schweizer, Kenneth S

    2014-05-21

    We generalize the force-level nonlinear Langevin equation theory of single particle hopping to include collective effects associated with long range elastic distortion of the liquid. The activated alpha relaxation event is of a mixed spatial character, involving two distinct, but inter-related, local and collective barriers. There are no divergences at volume fractions below jamming or temperatures above zero Kelvin. The ideas are first developed and implemented analytically and numerically in the context of hard sphere fluids. In an intermediate volume fraction crossover regime, the local cage process is dominant in a manner consistent with an apparent Arrhenius behavior. The super-Arrhenius collective barrier is more strongly dependent on volume fraction, dominates the highly viscous regime, and is well described by a nonsingular law below jamming. The increase of the collective barrier is determined by the amplitude of thermal density fluctuations, dynamic shear modulus or transient localization length, and a growing microscopic jump length. Alpha relaxation time calculations are in good agreement with recent experiments and simulations on dense fluids and suspensions of hard spheres. Comparisons of the theory with elastic models and entropy crisis ideas are explored. The present work provides a foundation for constructing a quasi-universal, fit-parameter-free theory for relaxation in thermal molecular liquids over 14 orders of magnitude in time.

  7. Batch leaching tests: Colloid release and PAH leachability

    SciTech Connect

    Bergendahl, J.

    2005-07-01

    The Toxicity Characteristic Leaching Procedure (TCLP) was developed by the U.S. Environmental Protection Agency to assess leaching potential of contaminants from waste, and to provide a test to classify, hazardous waste. It is a batch leaching test where a waste (such as contaminated soil) and an extraction fluid are agitated for a predetermined time. Since TCLP employs an aggressive mixing technique, it is possible that hydrophobic contaminant-laden colloidal fractions may appear as 'dissolved' constituents. In this study, TCLP was employed to determine the leachability of PAH contamination from a coal tar contaminated site. Generated colloids and the apparent aqueous concentrations of naphthalene and phenanthrene were measured at various mixing times in the extraction fluid. A mathematical model was developed that predicted the apparent aqueous contaminant concentration in the filtrate. This model accounted for the presence of colloids in the filtrate, and quantified contaminant desorption from colloids. The fraction of colloid-bound contaminant was predicted to be negligible for naphthalene. However, phenanthrene was predicted to have a significant fraction of the total contaminant in the colloidal phase, while naphthalene was primarily dissolved. The desorption model and PAH desorption data are presented here to determine the extent of colloid-facilitated desorption during leaching tests.

  8. Binary Colloidal Alloy Test-3 and 4: Critical Point

    NASA Technical Reports Server (NTRS)

    Weitz, David A.; Lu, Peter J.

    2007-01-01

    Binary Colloidal Alloy Test - 3 and 4: Critical Point (BCAT-3-4-CP) will determine phase separation rates and add needed points to the phase diagram of a model critical fluid system. Crewmembers photograph samples of polymer and colloidal particles (tiny nanoscale spheres suspended in liquid) that model liquid/gas phase changes. Results will help scientists develop fundamental physics concepts previously cloaked by the effects of gravity.

  9. Electrostatic interaction between colloidal particles trapped at an electrolyte interface.

    PubMed

    Majee, Arghya; Bier, Markus; Dietrich, S

    2014-04-28

    The electrostatic interaction between colloidal particles trapped at the interface between two immiscible electrolyte solutions is studied in the limit of small inter-particle distances. Within an appropriate model analytic expressions for the electrostatic potential as well as for the surface and line interaction energies are obtained. They demonstrate that the widely used superposition approximation, which is commonly applied to large distances between the colloidal particles, fails qualitatively at small distances, and is quantitatively unreliable even at large distances. Our results contribute to an improved description of the interaction between colloidal particles trapped at fluid interfaces.

  10. Lock and key colloids.

    PubMed

    Sacanna, S; Irvine, W T M; Chaikin, P M; Pine, D J

    2010-03-25

    New functional materials can in principle be created using colloids that self-assemble into a desired structure by means of a programmable recognition and binding scheme. This idea has been explored by attaching 'programmed' DNA strands to nanometre- and micrometre- sized particles and then using DNA hybridization to direct the placement of the particles in the final assembly. Here we demonstrate an alternative recognition mechanism for directing the assembly of composite structures, based on particles with complementary shapes. Our system, which uses Fischer's lock-and-key principle, employs colloidal spheres as keys and monodisperse colloidal particles with a spherical cavity as locks that bind spontaneously and reversibly via the depletion interaction. The lock-and-key binding is specific because it is controlled by how closely the size of a spherical colloidal key particle matches the radius of the spherical cavity of the lock particle. The strength of the binding can be further tuned by adjusting the solution composition or temperature. The composite assemblies have the unique feature of having flexible bonds, allowing us to produce flexible dimeric, trimeric and tetrameric colloidal molecules as well as more complex colloidal polymers. We expect that this lock-and-key recognition mechanism will find wider use as a means of programming and directing colloidal self-assembly.

  11. Implications of perennial saline springs for abnormally high fluid pressures and active thrusting in western California

    SciTech Connect

    Unruh, J.R.; Davisson, M.L.; Criss, R.E.; Moores, E.M. )

    1992-05-01

    Perennial saline springs in the Rumsey Hills area, southwestern Sacramento Valley, California, locally discharge at high elevations and near ridgetops. The springs are cold, are commonly associated with natural gas seeps, and typically emerge along west-vergent thrust faults. Stable isotope analyses indicate that the spring waters are similar to oil-field formation fluids and they have had a significant residence time in the subsurface at moderate temperatures. The nonmeteoric character of the springs demonstrates that they are not being fed by perched water tables. The authors propose that these subsurface formation waters are being forced to the surface by anomalously high porefluid pressures. The Rumsey Hills area is one of Quaternary uplift, thrusting, and crustal shortening, and prospect wells drilled there have encountered anomalously high fluid pressures at shallow depths. They attribute these high fluid pressures to active tectonic compression and shortening of Cretaceous marine sedimentary rocks. The widespread occurrence of anomalously high pore-fluid pressures and perennial saline springs in the Coast Ranges and western Great Valley suggests that much of western California may be characterized as a seismically active, overpressured thrust belt. The emergence of formation waters along thrust faults further suggests that patterns of subsurface fluid flow in western California may be similar to those in overpressured accretionary prisms, and that excess fluid pressures may also play a role in the distribution of seismicity.

  12. Overview of Fluid Dynamics Activities at the Marshall Space Flight Center

    NASA Technical Reports Server (NTRS)

    Garcia, Roberto; Griffin, Lisa W.; Wang, Ten-See

    1999-01-01

    Since its inception 40 years ago, Marshall Space Flight Center (MSFC) has had the need to maintain and advance state-of-the-art flow analysis and cold-flow testing capability to support its roles and missions. This overview discusses the recent organizational changes that have occurred at MSFC with emphasis on the resulting three groups that form the core of fluid dynamics expertise at MSFC: the Fluid Physics and Dynamics Group, the Applied Fluid Dynamics Analysis Group, and the Experimental Fluid Dynamics Group. Recently completed activities discussed include the analysis and flow testing in support of the Fastrac engine design, the X-33 vehicle design, and the X34 propulsion system design. Ongoing activities include support of the RLV vehicle design, Liquid Fly Back Booster aerodynamic configuration definition, and RLV focused technologies development. Other ongoing activities discussed are efforts sponsored by the Center Director's Discretionary Fund (CDDF) to develop an advanced incompressible flow code and to develop optimization techniques. Recently initiated programs and their anticipated required fluid dynamics support are discussed. Based on recent experiences and on the anticipated program needs, required analytical and experimental technique improvements are presented. Due to anticipated budgetary constraints, there is a strong need to leverage activities and to pursue teaming arrangements in order to advance the state-of-the-art and to adequately support concept development. Throughout this overview there is discussion of the lessons learned and of the capabilities demonstrated and established in support of the hardware development programs.

  13. Lysozyme activity in earthworm (Lumbricus terrestris) coelomic fluid and coelomocytes: Enzyme assay for immunotoxicity of xenobiotics

    SciTech Connect

    Goven, A.J.; Chen, S.C.; Fitzpatrick, L.C. . Dept. of Biological Sciences); Venables, B.J. . Dept. of Biological Sciences TRAC Laboratories Inc., Denton, TX )

    1994-04-01

    Lysozyme activity in earthworm (Lumbricus terrestris) coelomic fluid and coelomocytes appears sufficiently sensitive for use as a nonmammalian biomarker to detect toxic effects of sublethal body burdens of Cu[sup 2+]. Lysozyme, a phylogenetically conserved enzyme, is capable of bactericidal activity via action on peptidoglycan of gram-positive bacterial cell walls and functions as a component of an organism's innate antimicrobial defense mechanism. Coelomic fluid and coelomocyte lysozyme activities, which exhibit temperature-response patterns similar to those of human saliva, plasma, serum and leukocyte extracts, were sensitive to Cu[sup 2+] exposure. Lysozyme activity of coelomic fluid and coelomocyte extracts from earthworms exposed for 5 d to CuSO[sub 4], using filter paper contact exposure, decreased with increasing sublethal Cu[sup 2+] concentrations of 0.05 and 0.1 [mu]g/cm[sup 2]. Compared to controls, coelomic fluid lysozyme activity was suppressed significantly at both exposure concentrations, whereas coelomocyte extract lysozyme activity was suppressed significantly at the 0.1-[mu]g/cm[sup 2] exposure concentration. Low inherent natural variability and sensitivity to sublethal Cu[sup 2+] body burdens indicate that lysozyme activity has potential as a biomarker for assaying immunotoxicity of metals.

  14. Vanillin suppresses Kupffer cell-related colloidal carbon-induced respiratory burst activity in isolated perfused rat liver: anti-inflammatory implications.

    PubMed

    Galgani, José E; Núñez, Bárbara; Videla, Luis A

    2012-12-01

    The inhibition of NADPH oxidase has become a potential therapeutic target for oxidative stress-related diseases. We investigated whether vanillin modifies hepatic O(2) consumption associated with Kupffer cell functioning. The influence of vanillin on Kupffer cell functioning was studied in isolated perfused rat liver by colloidal carbon (CC) infusion (0.5 mg ml(-1)), concomitantly with sinusoidal efflux of lactate dehydrogenase (LDH) as an organ viability parameter. CC infusion increased the rate of O(2) consumption of the liver above basal values, an effect that represents the respiratory burst activity of Kupffer cells. However, CC-dependent respiratory burst activity was suppressed by previous infusion of 2 mM vanillin. Vanillin did not affect the liver CC uptake rate and liver sinusoidal efflux of LDH efflux. These findings, elicited by vanillin, were reproduced by the well-established NADPH oxidase inhibitor apocynin. In conclusion, vanillin suppresses the respiratory burst activity of Kupffer cells as assessed in intact liver, which may be associated with the inhibition of macrophage NADPH oxidase activity. Such a finding may have relevance in conditions underlying Kupffer cell-dependent up-regulation of the expression and release of pro-inflammatory mediators by redox-dependent mechanisms.

  15. Active modal control simulation of vibro-acoustic response of a fluid-loaded plate

    NASA Astrophysics Data System (ADS)

    Li, Sheng

    2011-11-01

    Active modal control simulation of vibro-acoustic response of a fluid-loaded plate is presented. The active modal control of the vibro-acoustic response is implemented using piezoelectric actuators/sensors. The active modal damping is added to the coupled system via negative velocity feedback. The feedback gain between the piezoelectric actuators/sensors for the modal control is obtained using the in-vacuo modal matrix and the incompressible fluid-loaded modal matrix. The modal control performance of structural vibration and acoustic radiation of a baffled plate is numerically studied. It is shown that the proposed method increases the modal damping ratio and achieves reduction in the mean square velocity and the sound power for given modes of the fluid-loaded plate.

  16. Assessment of rheumatoid activity based on clinical features and blood and synovial fluid analysis.

    PubMed Central

    Farr, M; Kendall, M J; Young, D W; Meynell, M J; Hawkins, C F

    1976-01-01

    Joint inflammation in rheumatoid arthritis has been assessed, and the most useful guides to disease activity were determined by analysis of synovial fluid and blood together with the history of joint disability. The patient's own evaluation of the amount of pain suffered was the most useful clinical assessment. Differential cell count and glucose estimations were the most helpful guides in the synovial fluid, while C-reactive protein in the serum most accurately reflected disease activity. The effects of systemic steroids on these indices were studied, and the differences between seronegative and seropositive patients noted. PMID:942273

  17. TRY-5 Is a Sperm-Activating Protease in Caenorhabditis elegans Seminal Fluid

    PubMed Central

    Smith, Joseph R.; Stanfield, Gillian M.

    2011-01-01

    Seminal fluid proteins have been shown to play important roles in male reproductive success, but the mechanisms for this regulation remain largely unknown. In Caenorhabditis elegans, sperm differentiate from immature spermatids into mature, motile spermatozoa during a process termed sperm activation. For C. elegans males, sperm activation occurs during insemination of the hermaphrodite and is thought to be mediated by seminal fluid, but the molecular nature of this activity has not been previously identified. Here we show that TRY-5 is a seminal fluid protease that is required in C. elegans for male-mediated sperm activation. We observed that TRY-5::GFP is expressed in the male somatic gonad and is transferred along with sperm to hermaphrodites during mating. In the absence of TRY-5, male seminal fluid loses its potency to transactivate hermaphrodite sperm. However, TRY-5 is not required for either hermaphrodite or male fertility, suggesting that hermaphrodite sperm are normally activated by a distinct hermaphrodite-specific activator to which male sperm are also competent to respond. Within males, TRY-5::GFP localization within the seminal vesicle is antagonized by the protease inhibitor SWM-1. Together, these data suggest that TRY-5 functions as an extracellular activator of C. elegans sperm. The presence of TRY-5 within the seminal fluid couples the timing of sperm activation to that of transfer of sperm into the hermaphrodite uterus, where motility must be rapidly acquired. Our results provide insight into how C. elegans has adopted sex-specific regulation of sperm motility to accommodate its male-hermaphrodite mode of reproduction. PMID:22125495

  18. TRY-5 is a sperm-activating protease in Caenorhabditis elegans seminal fluid.

    PubMed

    Smith, Joseph R; Stanfield, Gillian M

    2011-11-01

    Seminal fluid proteins have been shown to play important roles in male reproductive success, but the mechanisms for this regulation remain largely unknown. In Caenorhabditis elegans, sperm differentiate from immature spermatids into mature, motile spermatozoa during a process termed sperm activation. For C. elegans males, sperm activation occurs during insemination of the hermaphrodite and is thought to be mediated by seminal fluid, but the molecular nature of this activity has not been previously identified. Here we show that TRY-5 is a seminal fluid protease that is required in C. elegans for male-mediated sperm activation. We observed that TRY-5::GFP is expressed in the male somatic gonad and is transferred along with sperm to hermaphrodites during mating. In the absence of TRY-5, male seminal fluid loses its potency to transactivate hermaphrodite sperm. However, TRY-5 is not required for either hermaphrodite or male fertility, suggesting that hermaphrodite sperm are normally activated by a distinct hermaphrodite-specific activator to which male sperm are also competent to respond. Within males, TRY-5::GFP localization within the seminal vesicle is antagonized by the protease inhibitor SWM-1. Together, these data suggest that TRY-5 functions as an extracellular activator of C. elegans sperm. The presence of TRY-5 within the seminal fluid couples the timing of sperm activation to that of transfer of sperm into the hermaphrodite uterus, where motility must be rapidly acquired. Our results provide insight into how C. elegans has adopted sex-specific regulation of sperm motility to accommodate its male-hermaphrodite mode of reproduction.

  19. Colloids in sepsis: evenly distributed molecules surrounded by uneven questions.

    PubMed

    Zampieri, Fernando Godinho; Park, Marcelo; Azevedo, Luciano Cesar Pontes

    2013-05-01

    Colloids are frequently used for fluid expansion in the intensive care unit, although its use on several clinical scenarios remains unproven of any relevant clinical benefit. The purpose of this article was to carry out a narrative review regarding the safety and efficacy of colloids in patients with sepsis and septic shock, with emphasis on the most commonly used colloids, albumin and starches. Colloids are effective fluid expanders and are able to restore the hemodynamic profile with less total volume than crystalloids. These properties appear to be preserved even in patients with sepsis with increased capillary permeability. However, some colloids are associated with renal impairment and coagulation abnormalities. Starch use was associated with increased mortality in two large clinical trials. Also, starches probably have significant renal adverse effects and may be related to more need for renal replacement therapy in severe sepsis. Albumin is the only colloid that has been shown safe in patients with sepsis and that may be associated with improved outcomes on specific subpopulations. No trial so far found any robust clinical end point favoring colloid use in patients with sepsis. Because there is no proven benefit of the use of most colloids in patients with sepsis, its use should not be encouraged outside clinical trials. Albumin is the only colloid solution that has proven to be safe, and its use may be considered on hypoalbuminemic patients with sepsis. Nevertheless, there are no robust data to recommend routine albumin administration in sepsis. Starch use should be avoided in patients with sepsis because of the recent findings of a multicenter randomized study until further evidence is available.

  20. Comparison of Active Drug Concentrations in the Pulmonary Epithelial Lining Fluid and Interstitial Fluid of Calves Injected with Enrofloxacin, Florfenicol, Ceftiofur, or Tulathromycin.

    PubMed

    Foster, Derek M; Martin, Luke G; Papich, Mark G

    2016-01-01

    Bacterial pneumonia is the most common reason for parenteral antimicrobial administration to beef cattle in the United States. Yet there is little information describing the antimicrobial concentrations at the site of action. The objective of this study was to compare the active drug concentrations in the pulmonary epithelial lining fluid and interstitial fluid of four antimicrobials commonly used in cattle. After injection, plasma, interstitial fluid, and pulmonary epithelial lining fluid concentrations and protein binding were measured to determine the plasma pharmacokinetics of each drug. A cross-over design with six calves per drug was used. Following sample collection and drug analysis, pharmacokinetic calculations were performed. For enrofloxacin and metabolite ciprofloxacin, the interstitial fluid concentration was 52% and 78% of the plasma concentration, while pulmonary fluid concentrations was 24% and 40% of the plasma concentration, respectively. The pulmonary concentrations (enrofloxacin + ciprofloxacin combined) exceeded the MIC90 of 0.06 μg/mL at 48 hours after administration. For florfenicol, the interstitial fluid concentration was almost 98% of the plasma concentration, and the pulmonary concentrations were over 200% of the plasma concentrations, exceeding the breakpoint (≤ 2 μg/mL), and the MIC90 for Mannheimia haemolytica (1.0 μg/mL) for the duration of the study. For ceftiofur, penetration to the interstitial fluid was only 5% of the plasma concentration. Pulmonary epithelial lining fluid concentration represented 40% of the plasma concentration. Airway concentrations exceeded the MIC breakpoint for susceptible respiratory pathogens (≤ 2 μg/mL) for a short time at 48 hours after administration. The plasma and interstitial fluid concentrations of tulathromcyin were lower than the concentrations in pulmonary fluid throughout the study. The bronchial concentrations were higher than the plasma or interstitial concentrations, with over 900

  1. Comparison of Active Drug Concentrations in the Pulmonary Epithelial Lining Fluid and Interstitial Fluid of Calves Injected with Enrofloxacin, Florfenicol, Ceftiofur, or Tulathromycin

    PubMed Central

    Foster, Derek M.; Martin, Luke G.; Papich, Mark G.

    2016-01-01

    Bacterial pneumonia is the most common reason for parenteral antimicrobial administration to beef cattle in the United States. Yet there is little information describing the antimicrobial concentrations at the site of action. The objective of this study was to compare the active drug concentrations in the pulmonary epithelial lining fluid and interstitial fluid of four antimicrobials commonly used in cattle. After injection, plasma, interstitial fluid, and pulmonary epithelial lining fluid concentrations and protein binding were measured to determine the plasma pharmacokinetics of each drug. A cross-over design with six calves per drug was used. Following sample collection and drug analysis, pharmacokinetic calculations were performed. For enrofloxacin and metabolite ciprofloxacin, the interstitial fluid concentration was 52% and 78% of the plasma concentration, while pulmonary fluid concentrations was 24% and 40% of the plasma concentration, respectively. The pulmonary concentrations (enrofloxacin + ciprofloxacin combined) exceeded the MIC90 of 0.06 μg/mL at 48 hours after administration. For florfenicol, the interstitial fluid concentration was almost 98% of the plasma concentration, and the pulmonary concentrations were over 200% of the plasma concentrations, exceeding the breakpoint (≤ 2 μg/mL), and the MIC90 for Mannheimia haemolytica (1.0 μg/mL) for the duration of the study. For ceftiofur, penetration to the interstitial fluid was only 5% of the plasma concentration. Pulmonary epithelial lining fluid concentration represented 40% of the plasma concentration. Airway concentrations exceeded the MIC breakpoint for susceptible respiratory pathogens (≤ 2 μg/mL) for a short time at 48 hours after administration. The plasma and interstitial fluid concentrations of tulathromcyin were lower than the concentrations in pulmonary fluid throughout the study. The bronchial concentrations were higher than the plasma or interstitial concentrations, with over 900

  2. Larvicidal and Growth-Inhibitory Activity of Entomopathogenic Bacteria Culture Fluids Against Aedes aegypti (Diptera: Culicidae).

    PubMed

    da Silva, João Luiz Rosa; Undurraga Schwalm, Fernanda; Eugênio Silva, Carlos; da Costa, Marisa; Heermann, Ralf; Santos da Silva, Onilda

    2017-01-06

    Dengue, Chikungunya, and Zika are important vector-borne diseases, and Aedes aegypti L. is their main transmitter. As the disease management is mainly based on mosquito control strategies, the search for alternative and cost-effective approaches is ongoing. The Gram-negative bacteria Xenorhabdus nematophila and Photorhabdus luminescens are symbiotically associated with entomopathogenic nematodes and are highly pathogenic for insect larvae. After we have recently confirmed the toxicity of these bacteria in Ae. aegypti larvae, we here evaluated the toxic activity of culture fluids on the development of this mosquito species. Larval susceptibility was assessed by exposing larvae to different concentrations of P. luminescens or X. nematophila culture fluids to confirm whether secondary metabolites might cause the mosquitos' death. Xenorhabdus nematophila culture fluid was more effective and stable during the mosquito pathogenicity bioassays compared to that of P. luminescens Larval mortality started a few hours after exposure of the insects to the fluids. Furthermore, the residual effect of larvicidal activity of X. nematophila fluid persisted at full efficiency for 4 d. Particularly, larval mortality was still higher than 50% for up to 8 d. Exposure of larvae to a sublethal dose of X. nematophila fluid delayed pupation as well as emergence of adult mosquitoes and caused cumulative larval mortality higher than 90% by day 14. Here, we describe for the first time the use of stable culture fluids and therefore secondary metabolites of P. luminescens and X. nematophila as a promising basis for the use as biopesticide for control of Ae. aegypti in the future.

  3. Traps of carnivorous pitcher plants as a habitat: composition of the fluid, biodiversity and mutualistic activities

    PubMed Central

    Adlassnig, Wolfram; Peroutka, Marianne; Lendl, Thomas

    2011-01-01

    Background Carnivorous pitcher plants (CPPs) use cone-shaped leaves to trap animals for nutrient supply but are not able to kill all intruders of their traps. Numerous species, ranging from bacteria to vertrebrates, survive and propagate in the otherwise deadly traps. This paper reviews the literature on phytotelmata of CPPs. Pitcher Fluid as a Habitat The volumes of pitchers range from 0·2 mL to 1·5 L. In Nepenthes and Cephalotus, the fluid is secreted by the trap; the other genera collect rain water. The fluid is usually acidic, rich in O2 and contains digestive enzymes. In some taxa, toxins or detergents are found, or the fluid is extremely viscous. In Heliamphora or Sarracenia, the fluid differs little from pure water. Inquiline Diversity Pitcher inquilines comprise bacteria, protozoa, algae, fungi, rotifers, crustaceans, arachnids, insects and amphibia. The dominant groups are protists and Dipteran larvae. The various species of CPPs host different sets of inquilines. Sarracenia purpurea hosts up to 165 species of inquilines, followed by Nepenthes ampullaria with 59 species, compared with only three species from Brocchinia reducta. Reasons for these differences include size, the life span of the pitcher as well as its fluid. Mutualistic Activities Inquilines closely interact with their host. Some live as parasites, but the vast majority are mutualists. Beneficial activities include secretion of enzymes, feeding on the plant's prey and successive excretion of inorganic nutrients, mechanical break up of the prey, removal of excessive prey and assimilation of atmospheric N2. Conclusions There is strong evidence that CPPs influence their phytotelm. Two strategies can be distinguished: (1) Nepenthes and Cephalotus produce acidic, toxic or digestive fluids and host a limited diversity of inquilines. (2) Genera without efficient enzymes such as Sarracenia or Heliamphora host diverse organisms and depend to a large extent on their symbionts for prey utilization

  4. Colloid-induced kidney injury: experimental evidence may help to understand mechanisms

    PubMed Central

    Schortgen, Frédérique; Brochard, Laurent

    2009-01-01

    Fluid resuscitation is widely used, and many patients are therefore exposed to plasma volume expanders. Among these, colloids, particularly hydroxyethyl starches, have been shown in recent experiments and clinical studies to induce acute kidney injury. The mechanisms of colloid-induced acute kidney injury remain incompletely elucidated. The risks associated with colloid osmotic pressure elevation in vivo and the high incidence of osmotic nephrosis lesions in experimental models and clinical studies indicate that hydroxyethyl starches can no longer be considered safe. PMID:19435473

  5. Antifungal activity of fluid extract and essential oil from anise fruits (Pimpinella anisum L., Apiaceae).

    PubMed

    Kosalec, Ivan; Pepeljnjak, Stjepan; Kustrak, Danica

    2005-12-01

    Antifungal activities of fluid extract and essential oil obtained from anise fruits Pimpinella anisum L. (Apiaceae) were tested in vitro on clinical isolates of seven species of yeasts and four species of dermatophytes. Diffusion method with cylinders and the broth dilution method were used for antifungal activity testing. Anise fluid extract showed antimycotic activity against Candida albicans, C. parapsilosis, C. tropicalis, C. pseudotropicalis and C. krusei with MIC values between 17 and 20% (v/v). No activity was noticed against C. glabrata, and anis fruits extracts showed growth promotion activity on Geotrichum spp. Anise fruits extract inhibited the growth of dermatophyte species (Trichophyton rubrum, T. mentagrophytes, Microsporum canis and M. gypseum) with MIC values between 1.5 and 9.0% (V/V). Anise essential oil showed strong antifungal activity against yeasts with MIC lower than 1.56% (V/V) and dermatophytes with MIC lower than 0.78% (V/V). Significant differences in antifungal activities were found between anise fluid extract and anise essential oil (p<0.01). Anise essential oil exhibited stronger antifungal activities against yeasts and dermatophytes with MIC values between 0.10 and 1.56% (V/V), respectively.

  6. Factors Influencing the Measurement of Lysosomal Enzymes Activity in Human Cerebrospinal Fluid

    PubMed Central

    Parnetti, Lucilla; Eusebi, Paolo; Paciotti, Silvia; De Carlo, Claudia; Codini, Michela; Tambasco, Nicola; Rossi, Aroldo; Agnaf, Omar M. El.; Calabresi, Paolo; Beccari, Tommaso

    2014-01-01

    Measurements of the activities of lysosomal enzymes in cerebrospinal fluid have recently been proposed as putative biomarkers for Parkinson's disease and other synucleinopathies. To define the operating procedures useful for ensuring the reliability of these measurements, we analyzed several pre-analytical factors that may influence the activity of β-glucocerebrosidase, α-mannosidase, β-mannosidase, β-galactosidase, α-fucosidase, β-hexosaminidase, cathepsin D and cathepsin E in cerebrospinal fluid. Lysosomal enzyme activities were measured by well-established fluorimetric assays in a consecutive series of patients (n = 28) with different neurological conditions, including Parkinson's disease. The precision, pre-storage and storage conditions, and freeze/thaw cycles were evaluated. All of the assays showed within- and between-run variabilities below 10%. At −20°C, only cathepsin D was stable up to 40 weeks. At −80°C, the cathepsin D, cathepsin E, and β-mannosidase activities did not change significantly up to 40 weeks, while β-glucocerebrosidase activity was stable up to 32 weeks. The β-galactosidase and α-fucosidase activities significantly increased (+54.9±38.08% after 4 weeks and +88.94±36.19% after 16 weeks, respectively). Up to four freeze/thaw cycles did not significantly affect the activities of cathepsins D and E. The β-glucocerebrosidase activity showed a slight decrease (−14.6%) after two freeze/thaw cycles. The measurement of lysosomal enzyme activities in cerebrospinal fluid is reliable and reproducible if pre-analytical factors are accurately taken into consideration. Therefore, the analytical recommendations that ensue from this study may contribute to the establishment of actual values for the activities of cerebrospinal fluid lysosomal enzymes as putative biomarkers for Parkinson's disease and other neurodegenerative disorders. PMID:24983953

  7. Transport of Intrinsic Plutonium Colloids in Saturated Porous Media

    NASA Astrophysics Data System (ADS)

    Zhou, D.; Abdel-Fattah, A.; Boukhalfa, H.; Ware, S. D.; Tarimala, S.; Keller, A. A.

    2011-12-01

    Actinide contaminants were introduced to the subsurface environment as a result of nuclear weapons development and testing, as well as for nuclear power generation and related research activities for defense and civilian applications. Even though most actinide species were believed to be fairly immobile once in the subsurface, recent studies have shown the transport of actinides kilometers away from their disposal sites. For example, the treated liquid wastes released into Mortandad Canyon at the Los Alamos National Laboratory were predicted to travel less than a few meters; however, plutonium and americium have been detected 3.4 km away from the waste outfall. A colloid-facilitated mechanism has been suggested to account for this unexpected transport of these radioactive wastes. Clays, oxides, organic matters, and actinide hydroxides have all been proposed as the possible mobile phase. Pu ions associated with natural colloids are often referred to as pseudo-Pu colloids, in contrast with the intrinsic Pu colloids that consist of Pu oxides. Significant efforts have been made to investigate the role of pseudo-Pu colloids, while few studies have evaluated the environmental behavior of the intrinsic Pu colloids. Given the fact that Pu (IV) has extremely low solubility product constant, it can be inferred that the transport of Pu in the intrinsic form is highly likely at suitable environmental conditions. This study investigates the transport of intrinsic Pu colloids in a saturated alluvium material packed in a cylindrical column (2.5-cm Dia. x 30-cm high) and compares the results to previous data on the transport of pseudo Pu colloids in the same material. A procedure to prepare a stable intrinsic Pu colloid suspension that produced consistent and reproducible electrokinetic and stability data was developed. Electrokinetic properties and aggregation stability were characterized. The Pu colloids, together with trillium as a conservative tracer, were injected into the

  8. Increased cellular activity in rat insular cortex after water and salt ingestion induced by fluid depletion.

    PubMed

    Pastuskovas, Cinthia V; Cassell, Martin D; Johnson, Alan Kim; Thunhorst, Robert L

    2003-04-01

    Insular cortex (IC) receives inputs from multiple sensory systems, including taste, and from receptors that monitor body electrolyte and fluid balance and blood pressure. This work analyzed metabolic activity of IC cells after water and sodium ingestion induced by sodium depletion. Rats were injected with the diuretic furosemide (10 mg/kg body wt), followed 5 min later by injections of the angiotensin-converting enzyme inhibitor captopril (5 mg/kg body wt). After 90 min, some rats received water and 0.3 M NaCl to drink for 2 h while others did not. A third group had access to water and saline but was not depleted of fluids. All rats were killed for processing of brain tissue for Fos-immunoreactivity (Fos-ir). Nondepleted animals had weak-to-moderate levels of Fos-ir within subregions of IC. Fluid-depleted rats without fluid access had significantly increased Fos-ir in all areas of IC. Levels of Fos-ir were highest in fluid-depleted rats that drank water and sodium. Fos-ir levels were highest in anterior regions of IC and lowest in posterior regions of IC. These results implicate visceral, taste, and/or postingestional factors in the increased metabolic activity of cells in IC.

  9. Spontaneous mirror-symmetry breaking induces inverse energy cascade in 3D active fluids

    PubMed Central

    Słomka, Jonasz; Dunkel, Jörn

    2017-01-01

    Classical turbulence theory assumes that energy transport in a 3D turbulent flow proceeds through a Richardson cascade whereby larger vortices successively decay into smaller ones. By contrast, an additional inverse cascade characterized by vortex growth exists in 2D fluids and gases, with profound implications for meteorological flows and fluid mixing. The possibility of a helicity-driven inverse cascade in 3D fluids had been rejected in the 1970s based on equilibrium-thermodynamic arguments. Recently, however, it was proposed that certain symmetry-breaking processes could potentially trigger a 3D inverse cascade, but no physical system exhibiting this phenomenon has been identified to date. Here, we present analytical and numerical evidence for the existence of an inverse energy cascade in an experimentally validated 3D active fluid model, describing microbial suspension flows that spontaneously break mirror symmetry. We show analytically that self-organized scale selection, a generic feature of many biological and engineered nonequilibrium fluids, can generate parity-violating Beltrami flows. Our simulations further demonstrate how active scale selection controls mirror-symmetry breaking and the emergence of a 3D inverse cascade. PMID:28193853

  10. Fluid flow and heat convection studies for actively cooled airframes

    NASA Astrophysics Data System (ADS)

    Mills, A. F.

    This report details progress made on the jet impingement - liquid crystal - digital imaging experiment. With the design phase complete, the experiment is currently in the construction phase. In order to reach this phase two design related issues were resolved. The first issue was to determine NASP leading edge active cooling design parameters. Meetings were arranged with personnel at SAIC International, Torrance, CA in order to obtain recent publications that characterized expected leading edge heat fluxes as well as other details of NASP operating conditions. The information in these publications was used to estimate minimum and maximum jet Reynolds numbers needed to accomplish the required leading edge cooling, and to determine the parameters of the experiment. The details of this analysis are shown in Appendix A. One of the concerns for the NASP design is that of thermal stress due to large surface temperature gradients. Using a series of circular jets to cool the leading edge will cause a non-uniform temperature distribution and potentially large thermal stresses. Therefore it was decided to explore the feasibility of using a slot jet to cool the leading edge. The literature contains many investigations into circular jet heat transfer but few investigations of slot jet heat transfer. The first experiments will be done on circular jets impinging on a fiat plate and results compared to previously published data to establish the accuracy of the method. Subsequent experiments will be slot jets impinging on full scale models of the NASP leading edge. Table 1 shows the range of parameters to be explored. Next a preliminary design of the experiment was done. Previous papers which used a similar experimental technique were studied and elements of those experiments adapted to the jet impingement study. Trade-off studies were conducted to determine which design was the least expensive, easy to construct, and easy to use. Once the final design was settled, vendors were

  11. Fluid flow and heat convection studies for actively cooled airframes

    NASA Technical Reports Server (NTRS)

    Mills, A. F.

    1993-01-01

    This report details progress made on the jet impingement - liquid crystal - digital imaging experiment. With the design phase complete, the experiment is currently in the construction phase. In order to reach this phase two design related issues were resolved. The first issue was to determine NASP leading edge active cooling design parameters. Meetings were arranged with personnel at SAIC International, Torrance, CA in order to obtain recent publications that characterized expected leading edge heat fluxes as well as other details of NASP operating conditions. The information in these publications was used to estimate minimum and maximum jet Reynolds numbers needed to accomplish the required leading edge cooling, and to determine the parameters of the experiment. The details of this analysis are shown in Appendix A. One of the concerns for the NASP design is that of thermal stress due to large surface temperature gradients. Using a series of circular jets to cool the leading edge will cause a non-uniform temperature distribution and potentially large thermal stresses. Therefore it was decided to explore the feasibility of using a slot jet to cool the leading edge. The literature contains many investigations into circular jet heat transfer but few investigations of slot jet heat transfer. The first experiments will be done on circular jets impinging on a fiat plate and results compared to previously published data to establish the accuracy of the method. Subsequent experiments will be slot jets impinging on full scale models of the NASP leading edge. Table 1 shows the range of parameters to be explored. Next a preliminary design of the experiment was done. Previous papers which used a similar experimental technique were studied and elements of those experiments adapted to the jet impingement study. Trade-off studies were conducted to determine which design was the least expensive, easy to construct, and easy to use. Once the final design was settled, vendors were

  12. Development of high-sensitive, reproducible colloidal surface-enhanced Raman spectroscopy active substrate using silver nanocubes for potential biosensing applications

    NASA Astrophysics Data System (ADS)

    Hasna, Kudilatt; Lakshmi, Kiran; Ezhuthachan Jayaraj, Madambi Kunjukuttan; Kumar, Kumaran Rajeev; Matham, Murukeshan Vadakke

    2016-04-01

    Surface-enhanced Raman spectroscopy (SERS) has emerged as one of the thrust research areas that could find potential applications in bio and chemical sensing. We developed colloidal SERS active substrate with excellent sensitivity and high reproducibility using silver nanocube (AgNC) synthesized via the solvothermal method. Finite-difference time-domain simulation was carried out in detail to visualize dipole generation in the nanocube during localized surface plasmon resonance and to locate the respective hot spots in AgNC responsible for the huge Raman enhancement. The prediction is verified by the SERS analysis of the synthesized nanocubes using Rhodamine 6G molecule. An excellent sensitivity with a detection limit of 10-17 M and a very high enhancement factor of 1.2×108 confirms the "hot spots" in the nanocube. SERS activity is also carried out for crystal violet and for food adulterant Sudan I molecule. Finally, label-free DNA detection is performed to demonstrate the versatility of SERS as a potential biosensor.

  13. Characterization of cellulolytic activity from digestive fluids of Dissosteira carolina (Orthoptera: Acrididae)

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Previous screening of head-derived and gut fluid extracts of Carolina grasshoppers, Dissosteira carolina (L.), revealed relatively high activity against cellulase substrates when compared to other insect groups. In this work we report on the characterization and identification of enzymes involved i...

  14. Indices of free radical activity in the cerebrospinal fluid in motor neuron disease.

    PubMed Central

    Mitchell, J D; Jackson, M J; Pentland, B

    1987-01-01

    Indices of free-radical activity and lipid peroxidation were studied in cerebrospinal fluid samples obtained from 11 patients with motor neuron disease and 11 reference subjects. No differences were found between the two groups. The significance of this finding is discussed in relation to current views of the possible pathogenesis of this disease. PMID:3625217

  15. Sampling colloids and colloid-associated contaminants in ground water

    USGS Publications Warehouse

    Backhus, Debera A.; Ryan, Joseph N.; Groher, Daniel M.; MacFarlane, John K.; Gschwend, Philip M.

    1993-01-01

    It has recently been recognized that mobile colloids may affect the transport of contaminants in ground water. To determine the significance of this process, knowledge of both the total mobile load (dissolved + colloid-associated) and the dissolved concentration of a ground-water contaminant must be obtained. Additional information regarding mobile colloid characteristics and concentrations are required to predict accurately the fate and effects of contaminants at sites where significant quantities of colloids are found. To obtain this information, a sampling scheme has been designed and refined to collect mobile colloids while avoiding the inclusion of normally immobile subsurface and well-derived solids. The effectiveness of this sampling protocol was evaluated at a number of contaminated and pristine sites.The sampling results indicated that slow, prolonged pumping of ground water is much more effective at obtaining ground-water samples that represent in situ colloid populations than bailing. Bailed samples from a coal tar-contaminated site contained 10–100 times greater colloid concentrations and up to 750 times greater polycyclic aromatic hydrocarbon concentrations as were detected in slowly pumped samples. The sampling results also indicated that ground-water colloid concentrations should be monitored in the field to determine the adequacy of purging if colloid and colloid-associated contaminants are of interest. To avoid changes in the natural ground-water colloid population through precipitation or coagulation, in situ ground-water chemistry conditions must be preserved during sampling and storage. Samples collected for determination of the total mobile load of colloids and low-solubility contaminants must not be filtered because some mobile colloids are removed by this process. Finally, suggestions that mobile colloids are present in ground water at any particular site should be corroborated with auxiliary data, such as colloid levels in

  16. Spherical colloidal photonic crystals.

    PubMed

    Zhao, Yuanjin; Shang, Luoran; Cheng, Yao; Gu, Zhongze

    2014-12-16

    CONSPECTUS: Colloidal photonic crystals (PhCs), periodically arranged monodisperse nanoparticles, have emerged as one of the most promising materials for light manipulation because of their photonic band gaps (PBGs), which affect photons in a manner similar to the effect of semiconductor energy band gaps on electrons. The PBGs arise due to the periodic modulation of the refractive index between the building nanoparticles and the surrounding medium in space with subwavelength period. This leads to light with certain wavelengths or frequencies located in the PBG being prohibited from propagating. Because of this special property, the fabrication and application of colloidal PhCs have attracted increasing interest from researchers. The most simple and economical method for fabrication of colloidal PhCs is the bottom-up approach of nanoparticle self-assembly. Common colloidal PhCs from this approach in nature are gem opals, which are made from the ordered assembly and deposition of spherical silica nanoparticles after years of siliceous sedimentation and compression. Besides naturally occurring opals, a variety of manmade colloidal PhCs with thin film or bulk morphology have also been developed. In principle, because of the effect of Bragg diffraction, these PhC materials show different structural colors when observed from different angles, resulting in brilliant colors and important applications. However, this angle dependence is disadvantageous for the construction of some optical materials and devices in which wide viewing angles are desired. Recently, a series of colloidal PhC materials with spherical macroscopic morphology have been created. Because of their spherical symmetry, the PBGs of spherical colloidal PhCs are independent of rotation under illumination of the surface at a fixed incident angle of the light, broadening the perspective of their applications. Based on droplet templates containing colloidal nanoparticles, these spherical colloidal PhCs can be

  17. The Role of Surface Tension in Colloid Retention and Remobilization during Two-phase Flow

    NASA Astrophysics Data System (ADS)

    Zhang, Q.

    2015-12-01

    During unsaturated flow, the accumulation of colloids at fluid-fluid interfaces (AWIs) and fluid-fluid-solid contact lines (AWSs) depend on those areas and surface tension. The area and capillary forces exerting on colloids can be different by adjusting the liquid-liquid surface tension. In the present work, we adjust only surface tension to change the configuration of AWI and AWSs. Experiments were performed in a Polydimethylsiloxane (PDMS) micro-model. Fluorescent carboxylate-modified polystyrene microspheres, with diameter of 300nm were used as model colloids. Water and fluorinert-FC43 were used as the two immiscible liquids. Given the fact that PDMS is a hydrophobic material, fluorinert was the wetting phase and water was the non-wetting phase in this micro-model. Surface tension was changed by adding fluorinert soluble surfactant into fluorinert-FC43. We visualized colloids interacting with the moving fluid-fluid interfaces by confocal microscopy. We also obtained colloid concentration breakthrough curves by measuring the fluorescent intensities in the outlet of the micro-model. The breakthrough curves showed that under steady-state unsaturated flow, less colloid were retained in the system under low surface tension. The visualization results showed that, under low surface tension, the fluid-fluid interfaces are almost flat, thus less area and short contact line available for colloids to attach to. During transient flow, more colloids were remobilized by the moving fluorinert-water interfaces (FWIs) and fluorinert-water-solid contact lines (FWSCs) under high surface tension. Confocal results and measured breakthrough curves confirmed that lowing surface tension decreased capillary force and liquid-liquid area, resulting less retention and remobilization of colloids.

  18. Evaluation of activated sludge for biodegradation of propylene glycol as an aircraft deicing fluid.

    PubMed

    Delorit, Justin D; Racz, LeeAnn

    2014-04-01

    Aircraft deicing fluid used at airport facilities is often collected for treatment or disposal in order to prevent serious ecological threats to nearby surface waters. This study investigated lab scale degradation of propylene glycol, the active ingredient in a common aircraft deicing fluid, by way of a laboratory-scale sequencing batch reactor containing municipal waste water treatment facility activated sludge performing simultaneous organic carbon oxidation and nitrification. The ability of activated sludge to remove propylene glycol was evaluated by studying the biodegradation and sorption characteristics of propylene glycol in an activated sludge medium. The results indicate sorption may play a role in the fate of propylene glycol in AS, and the heterotrophic bacteria readily degrade this compound. Therefore, a field deployable bioreactor may be appropriate for use in flight line applications.

  19. Zero-valent iron colloid emplacement in sand columns

    SciTech Connect

    Cantrell, K.J.; Kaplan, D.I.

    1997-05-01

    Application of chemically reactive barriers to mitigate contaminant migration is an active area of research and development. Studies were conducted to evaluate a novel approach of emplacing chemically reactive barriers composed of zero-valent iron (Fe{sup 0}) by injecting suspensions of colloidal-size Fe{sup 0} particles into porous media. The specific objective of this study was to evaluate the effect of influent colloid concentration, rate, and volume of colloidal suspensions on Fe{sup 0} colloid emplacement in sand columns. Relatively even distributions of Fe{sup 0} throughout a sand column were obtained at low influent colloid concentrations and high injection rates. As the concentration of influent suspensions was increased, a point was reached beyond which a significant increase in the filtration of Fe{sup 0} particles near the front of the column was observed. This point was also found to occur at lower influent colloid concentrations as the injection rate was decreased, i.e., there was an interactive effect of influent colloid concentration and injection rate on the extent of filtration that occurred near the front of the column. As the volume of the colloidal suspension injected into the column was increased, the distribution of Fe{sup 0} colloids within the column became increasingly even.

  20. Colloid Formation at Waste Plume Fronts

    SciTech Connect

    Wan, Jiamin; Tokunaga, Tetsu K.; Saiz, Eduardo; Larsen, Joern T.; Zheng, Zuoping; Couture, Rex A.

    2004-05-22

    Highly saline and caustic tank waste solutions containing radionuclides and toxic metals have leaked into sediments at U. S. Department of Energy (DOE) facilities such as the Hanford Site (Washington State). Colloid transport is frequently invoked to explain migration of radionuclides and metals in the subsurface. To understand colloid formation during interactions between highly reactive fluids and sediments and its impact on contaminant transport, we simulated tank waste solution (TWS) leakage processes in laboratory columns at ambient and elevated (70 C) temperatures. We found that maximum formation of mobile colloids occurred at the plume fronts (hundreds to thousands times higher than within the plume bodies or during later leaching). Concentrations of suspended solids were as high as 3 mass%, and their particle-sizes ranged from tens of nm to a few {micro}m. Colloid chemical composition and mineralogy depended on temperature. During infiltration of the leaked high Na{sup +} waste solution, rapid and completed Na{sup +} replacement of exchangeable Ca{sup 2+} and Mg{sup 2+} from the sediment caused accumulation of these divalent cations at the moving plume front. Precipitation of supersaturated Ca{sup 2+}/Mg{sup 2+}-bearing minerals caused dramatic pH reduction at the plume front. In turn, the reduced pH caused precipitation of other minerals. This understanding can help predict the behavior of contaminant trace elements carried by the tank waste solutions, and could not have been obtained through conventional batch studies.

  1. Combustion, Complex Fluids, and Fluid Physics Experiments on the ISS

    NASA Technical Reports Server (NTRS)

    Motil, Brian; Urban, David

    2012-01-01

    From the very early days of human spaceflight, NASA has been conducting experiments in space to understand the effect of weightlessness on physical and chemically reacting systems. NASA Glenn Research Center (GRC) in Cleveland, Ohio has been at the forefront of this research looking at both fundamental studies in microgravity as well as experiments targeted at reducing the risks to long duration human missions to the moon, Mars, and beyond. In the current International Space Station (ISS) era, we now have an orbiting laboratory that provides the highly desired condition of long-duration microgravity. This allows continuous and interactive research similar to Earth-based laboratories. Because of these capabilities, the ISS is an indispensible laboratory for low gravity research. NASA GRC has been actively involved in developing and operating facilities and experiments on the ISS since the beginning of a permanent human presence on November 2, 2000. As the lead Center for combustion, complex fluids, and fluid physics; GRC has led the successful implementation of the Combustion Integrated Rack (CIR) and the Fluids Integrated Rack (FIR) as well as the continued use of other facilities on the ISS. These facilities have supported combustion experiments in fundamental droplet combustion; fire detection; fire extinguishment; soot phenomena; flame liftoff and stability; and material flammability. The fluids experiments have studied capillary flow; magneto-rheological fluids; colloidal systems; extensional rheology; pool and nucleate boiling phenomena. In this paper, we provide an overview of the experiments conducted on the ISS over the past 12 years.

  2. Effects of adding fluids to solid foods on muscle activity and number of chewing cycles.

    PubMed

    van der Bilt, Andries; Engelen, Lina; Abbink, Jan; Pereira, Luciano J

    2007-06-01

    The production of a sufficient amount of saliva is indispensable for good chewing. In the present study, we examined the hypothesis that adding fluid to a food will facilitate the chewing process, especially for dry foods. The effect might be larger for subjects with relatively low salivary flow rates. Furthermore, adding fluids that contain mucins or alpha-amylase may have a larger facilitating effect on mastication than the addition of water alone. Twenty subjects chewed on melba toast, breakfast cake, carrot, peanut, and Gouda cheese. In addition, they chewed on these foods after different volumes of water, artificial saliva containing mucins, or a solution of alpha-amylase had been added. Muscle activity and number of chewing strokes until swallowing were measured. The salivary flow rates of the subjects were also determined. Adding fluid to the food significantly reduced the number of chewing cycles and total muscular work (i.e. the integrated surface electromyograpy of masseter and temporalis muscles measured bilaterally, summed for all chewing cycles) until swallowing for all foods, except carrot. The largest effects were observed for melba and cake, which are dry products requiring sufficient saliva to form a coherent bolus safe for swallowing. More facilitation of the chewing process was observed after adding fluid to breakfast cake for subjects with relatively low salivary flow rates. The type of fluid had no significant effect on the chewing process.

  3. Colloids and Nucleation

    NASA Technical Reports Server (NTRS)

    Ackerson, Bruce

    1997-01-01

    The objectives of the work funded under this grant were to develop a microphotographic technique and use it to monitor the nucleation and growth of crystals of hard colloidal spheres. Special attention is given to the possible need for microgravity studies in future experiments. A number of persons have been involved in this work. A masters student, Keith Davis, began the project and developed a sheet illumination apparatus and an image processing system for detection and analysis. His work on a segmentation program for image processing was sufficient for his master's research and has been published. A post doctoral student Bernie Olivier and a graduate student Yueming He, who originally suggested the sheet illumination, were funded by another source but along with Keith made photographic series of several samples (that had been made by Keith Davis). Data extraction has been done by Keith, Bernie, Yueming and two undergraduates employed on the grant. Results are published in Langmuir. These results describe the sheet lighting technique as one which illuminates not only the Bragg scattering crystal, but all the crystals. Thus, accurate crystal counts can be made for nucleation rate measurements. The strange crystal length scale reduction, observed in small angle light scattering (SALS) studies, following the initial nucleation and growth period, has been observed directly. The Bragg scattering (and dark) crystal size decreases in the crossover region. This could be an effect due to gravitational forces or due to over- compression of the crystal during growth. Direct observations indicate a complex morphology for the resulting hard sphere crystals. The crystal edges are fairly sharp but the crystals have a large degree of internal structure. This structure is a result of (unstable) growth and not aggregation. As yet unpublished work compares growth exponents data with data obtained by SALS. The nucleation rate density is determined over a broad volume fraction range

  4. Aqueous Volatiles in Hydrothermal fluids from the Main Endeavour Vent Field: Temporal Variability Following Earthquake Activity

    NASA Astrophysics Data System (ADS)

    Seewald, J. S.; Cruse, A. M.; Saccocia, P. J.

    2001-12-01

    Volatile species play a critical role in a broad spectrum of physical, chemical, and biological processes associated with hydrothermal circulation at oceanic spreading centers. Earthquake activity at the Main Endeavour vent field, northern Juan de Fuca Ridge in June 1999 [1] provided and opportunity to assess factors that regulate the flux of volatile species from the oceanic crust to the water column following a rapid change in subsurface reaction zone conditions. High temperature vent fluids were collected in gas-tight samplers at the Main Endeavour field in September 1999, approximately four months after the earthquakes, and again in July 2000, and were analyzed for the abundance of aqueous volatile and non-volatile species. Measured concentrations of aqueous H2, H2S, and CO2 increased substantially in September 1999 relative to pre-earthquake values [2,3], and subsequently decreased in July 2000, while aqueous Cl concentrations initially decreased in 1999 and subsequently increased in 2000. Concentrations of Cl in all fluids were depleted relative to seawater values. Aqueous CH4 and NH3 concentrations decreased in both the 1999 and 2000 samples relative to pre- earthquake values. Variations in Cl concentration of Endeavour fluids reflect varying degrees of phase separation under near critical temperature and pressure conditions. Because volatile species efficiently partition into the vapor phase, variations in their abundance as a function of Cl concentration can be used to constrain conditions of phase separation and fluid-rock interaction. For example, concentrations of volatile species that are not readily incorporated into minerals (CH4 and NH3) correlated weakly with Cl suggesting phase separation was occurring under supercritical conditions after the earthquake activity. In contrast, compositional data for fluids prior to the earthquakes indicate a strong negative correlation between these species and Cl suggesting phase separation under subcritical

  5. A non-intrusive fluid-wave actuator and sensor pair for the active control of fluid-borne vibrations in a pipe

    NASA Astrophysics Data System (ADS)

    Brennan, M. J.; Elliott, S. J.; Pinnington, R. J.

    1996-06-01

    This paper describes the design of a non-intrusive fluid-wave actuator and sensor pair for use in an active control system to control fluid-borne vibrations in pipework systems. Piping systems can be excited by sources such as pumps and compressors and vibrational energy can propagate both in the pipe wall and the fluid. The transducers developed in this paper are designed only for the control of the fluid-borne vibrational energy. A theoretical framework is developed that integrates the transducers into the pipe and couples them to the motion of the fluid inside the pipe. A hydraulic actuator driven with a magnetostrictive element and fitted to a water-filled perspex pipe has been designed and tested. The sensor was made from piezoelectric elements fitted around the outer circumference of the pipe. Experimental results show that the actuator is capable of suppressing a propagating fluid-wave, but in doing so it increases the vibration of the pipe-wall in the vicinity of the actuator. When the sensor is employed as an error sensor together with the actuator in the frequency range 10 - 1000 Hz, a reduction in the fluid-wave amplitude of around 20 dB is possible.

  6. Immunosuppressive activity of human amniotic fluid of normal and abnormal pregnancies.

    PubMed

    Shohat, B; Faktor, J M

    1988-01-01

    Twenty specimens of amniotic fluid (AF) obtained between week 16 and 18 of gestation from normal pregnant women and six specimens from pregnant women in which trisomia of chromosome 21 was found were tested for immunosuppressive activity. Incubation of normal human donor lymphocytes with 0.2-1 mL of AF from normal pregnant women for one hour at 37 degrees C was sufficient for induction of significant inhibition of the ability of these cells to induce a local xenogeneic graft-versus-host reaction (GVHR) as well as inhibition of E and E-active rosette formation, the GVHR being the most sensitive test. On the other hand, amniotic fluid obtained from the six pregnant women in which trisomia of chromosome 21 was found showed no inhibitory activity in either the E or E-active rosette formation, nor in the local xenogeneic graft-versus-host reaction. AF from all the women tested was found to have no effect on phenotype expression of the lymphocytes, as tested by the monoclonal antibodies OKT4+ and OKT8+, nor on B-lymphocytes, as tested by surface immunoglobulins. No correlation was found between the alpha-fetoprotein levels in the sera of those women and the immunosuppressive activity. These findings indicate that genetic defects of the conceptus are not limited to the embryo but may affect the composition of immunosuppressive components present in normal amniotic fluid.

  7. Active 3-D microscaffold system with fluid perfusion for culturing in vitro neuronal networks.

    PubMed

    Rowe, Laura; Almasri, Mahmoud; Lee, Kil; Fogleman, Nick; Brewer, Gregory J; Nam, Yoonkey; Wheeler, Bruce C; Vukasinovic, Jelena; Glezer, Ari; Frazier, A Bruno

    2007-04-01

    This work demonstrated the design, fabrication, packaging, and characterization of an active microscaffold system with fluid perfusion/nutrient delivery functionalities for culturing in vitro neuronal networks from dissociated hippocampal rat pup neurons. The active microscaffold consisted of an 8 x 8 array of hollow, microfabricated, SU-8 towers (1.0 mm or 1.5 mm in height), with integrated, horizontal, SU-8 cross-members that connect adjacent towers, thus forming a 3-D grid that is conducive to branching, growth, and increased network formation of dissociated hippocampal neurons. Each microtower in the microscaffold system contained a hollow channel and multiple fluid ports for media delivery and perfusion of nutrients to the in vitro neuronal network growing within the microscaffold system. Additionally, there were two exposed Au electrodes on the outer wall of each microtower at varying heights (with insulated leads running within the microtower walls), which will later allow for integration of electrical stimulation/recording functionalities into the active microscaffold system. However, characterization of the stimulation/recording electrodes was not included in the scope of this paper. Design, fabrication, fluid packaging, and characterization of the active microscaffold system were performed. Furthermore, use of the active microscaffold system was demonstrated by culturing primary hippocampal embryonic rat pup neurons, and characterizing cell viability within the microscaffold system.

  8. Synovial fluid matrix metalloproteinase-2 and -9 activities in dogs suffering from joint disorders.

    PubMed

    Murakami, Kohei; Maeda, Shingo; Yonezawa, Tomohiro; Matsuki, Naoaki

    2016-07-01

    The activity of matrix metalloproteinase (MMP)-2 and MMP-9 in synovial fluids (SF) sampled from dogs with joint disorders was investigated by gelatin zymography and densitometry. Pro-MMP-2 showed similar activity levels in dogs with idiopathic polyarthritis (IPA; n=17) or canine rheumatoid arthritis (cRA; n=4), and healthy controls (n=10). However, dogs with cranial cruciate ligament rupture (CCLR; n=5) presented significantly higher pro-MMP-2 activity than IPA and healthy dogs. Meanwhile, dogs with IPA exhibited significantly higher activity of pro- and active MMP-9 than other groups. Activity levels in pro- and active MMP-9 in cRA and CCLR dogs were not significantly different from those in healthy controls. Different patterns of MMP-2 and MMP-9 activity may reflect the differences in the underlying pathological processes.

  9. Fluid therapy in shock.

    PubMed

    Mandell, D C; King, L G

    1998-05-01

    The goal of treatment for all types of shock is the improvement of tissue perfusion and oxygenation. The mainstay of therapy for hypovolemic and septic shock is the expansion of the intravascular volume by fluid administration, including crystalloids, colloids, and blood products. Frequent physical examinations and monitoring enable the clinician to determine the adequacy of tissue oxygenation and thus the success of the fluid therapy.

  10. Hydrothermal mineralogy and fluid inclusions chemistry to understand the roots of active geothermal systems

    NASA Astrophysics Data System (ADS)

    Chambefort, I. S.; Dilles, J. H.; Heinrich, C.

    2013-12-01

    An integrated study to link magmatic textures, magmatic mineral compositions, hydrothermal alteration zoning, hydrothermal mineral chemistry, and fluid inclusion compositions has been undertaken to link an intrusive complex and its degassing alteration halo with their surface equivalent in an active geothermal system. Ngatamariki geothermal system, New Zealand, presents a unique feature in the Taupo Volcanic Zone (TVZ). Drilling intercepted an intrusive complex with a high temperature alteration halo similarly to what is observed in magmatic-derived ore deposits. Thus it presents the perfect opportunity to study the magmatic-hydrothermal transition of the TVZ by characterizing the nature of the deep magmatic fluids link to the heat source of the world known geothermal fields. The record of magmatic-hydrothermal fluid-rock interactions preserved at Ngatamariki may be analogous of processes presently occurring at depth beneath TVZ geothermal systems. The intrusive complex consists of over 5 km3 of tonalite, diorite, basalt and aplitic dykes. Evidence of undercooling subsolidus magmatic textures such as myrmekite and skeletal overgrowth are commonly observed and often linked to volatile loss. The fluids released during the crystallization of the intrusive complex are interpreted to be at the origin of the surrounding high temperature alteration halo. Advanced argillic to potassic alteration and high temperature acidic assemblage is associated with high-temperature quartz veining at depth and vuggy silica at the paleo-surface. Major element compositions of the white micas associated with the high temperature halo show a transition from, muscovite to phengite, muscovitic illite away from the intrusion, with a transition to pyrophyllite and/ or topaz, and andalusite characteristic of more acidic conditions. Abundant high-density (up to 59 wt% NaCl eq and homogenization temperatures of 550 degree Celsius and above) coexist with low-density vapor fluid inclusions. This

  11. Electrorheological fluid and its applications in microfluidics.

    PubMed

    Wang, Limu; Gong, Xiuqing; Wen, Weijia

    2011-01-01

    Microfluidics is a low-cost technique for fast-diagnosis and microsynthesis. Within a decade it might become the foundation of point-of-care and lab-on-a-chip applications. With microfluidic chips, high-throughput sample screening and information processing are made possible. The picoliter droplet runs in microfluidic chips are ideal miniaturized vessels for microdetection and microsynthesis. Meanwhile, individual manipulation of microdroplets remains a challenge: the shortcomings in automatic, reliable, and scalable methods for logic control prevent further integration of microfluidic applications. The giant electrorheological fluid (GERF), which is a kind of "smart" colloid, has tunable viscosity under the influence of external electric field. Therefore, GERF is introduced as the active controlling medium, with real-time response in on-chip fluid control. This review article introduces the working principles and fabrication methods of different types of electrorheological fluid, and extensively describes the strategies of GERF-assisted microfluidic controlling schemes.

  12. Nepenthesin protease activity indicates digestive fluid dynamics in carnivorous nepenthes plants.

    PubMed

    Buch, Franziska; Kaman, Wendy E; Bikker, Floris J; Yilamujiang, Ayufu; Mithöfer, Axel

    2015-01-01

    Carnivorous plants use different morphological features to attract, trap and digest prey, mainly insects. Plants from the genus Nepenthes possess specialized leaves called pitchers that function as pitfall-traps. These pitchers are filled with a digestive fluid that is generated by the plants themselves. In order to digest caught prey in their pitchers, Nepenthes plants produce various hydrolytic enzymes including aspartic proteases, nepenthesins (Nep). Knowledge about the generation and induction of these proteases is limited. Here, by employing a FRET (fluorescent resonance energy transfer)-based technique that uses a synthetic fluorescent substrate an easy and rapid detection of protease activities in the digestive fluids of various Nepenthes species was feasible. Biochemical studies and the heterologously expressed Nep II from Nepenthes mirabilis proved that the proteolytic activity relied on aspartic proteases, however an acid-mediated auto-activation mechanism was necessary. Employing the FRET-based approach, the induction and dynamics of nepenthesin in the digestive pitcher fluid of various Nepenthes plants could be studied directly with insect (Drosophila melanogaster) prey or plant material. Moreover, we observed that proteolytic activity was induced by the phytohormone jasmonic acid but not by salicylic acid suggesting that jasmonate-dependent signaling pathways are involved in plant carnivory.

  13. Nepenthesin Protease Activity Indicates Digestive Fluid Dynamics in Carnivorous Nepenthes Plants

    PubMed Central

    Buch, Franziska; Kaman, Wendy E.; Bikker, Floris J.; Yilamujiang, Ayufu; Mithöfer, Axel

    2015-01-01

    Carnivorous plants use different morphological features to attract, trap and digest prey, mainly insects. Plants from the genus Nepenthes possess specialized leaves called pitchers that function as pitfall-traps. These pitchers are filled with a digestive fluid that is generated by the plants themselves. In order to digest caught prey in their pitchers, Nepenthes plants produce various hydrolytic enzymes including aspartic proteases, nepenthesins (Nep). Knowledge about the generation and induction of these proteases is limited. Here, by employing a FRET (fluorescent resonance energy transfer)-based technique that uses a synthetic fluorescent substrate an easy and rapid detection of protease activities in the digestive fluids of various Nepenthes species was feasible. Biochemical studies and the heterologously expressed Nep II from Nepenthes mirabilis proved that the proteolytic activity relied on aspartic proteases, however an acid-mediated auto-activation mechanism was necessary. Employing the FRET-based approach, the induction and dynamics of nepenthesin in the digestive pitcher fluid of various Nepenthes plants could be studied directly with insect (Drosophila melanogaster) prey or plant material. Moreover, we observed that proteolytic activity was induced by the phytohormone jasmonic acid but not by salicylic acid suggesting that jasmonate-dependent signaling pathways are involved in plant carnivory. PMID:25750992

  14. Inflammatory synovial fluid microenvironment drives primary human chondrocytes to actively take part in inflammatory joint diseases.

    PubMed

    Röhner, Eric; Matziolis, Georg; Perka, Carsten; Füchtmeier, Bernd; Gaber, Timo; Burmester, Gerd-Rüdiger; Buttgereit, Frank; Hoff, Paula

    2012-06-01

    The role of human chondrocytes in the pathogenesis of cartilage degradation in rheumatic joint diseases has presently gained increasing interest. An active chondrocyte participation in local inflammation may play a role in the initiation and progression of inflammatory joint diseases and in a disruption of cartilage repair mechanisms resulting in cartilage degradation. In the present study, we hypothesized that inflammatory synovial fluid triggers human chondrocytes to actively take part in inflammatory processes in rheumatic joint diseases. Primary human chondrocytes were incubated in synovial fluids gained from patients with rheumatoid arthritis, psoriasis arthritis and reactive arthritis. The detection of vital cell numbers was determined by using Casy Cell Counter System. Apoptosis was measured by Annexin-V and 7AAD staining. Cytokine and chemokine secretion was determined by a multiplex suspension array. Detection of vital cells showed a highly significant decrease in chondrocyte numbers. Flow cytometry demonstrated a significant increase in apoptotic chondrocytes after the incubation. An active secretion of cytokines such as MCP-1 and MIF by chondrocytes was observed. The inflammatory synovial fluid microenvironment mediates apoptosis and cell death of chondrocytes. Moreover, in terms of cytokine secretion, it also induces an active participation of chondrocytes in ongoing inflammation.

  15. PREFACE: Colloidal and molecular electro-optics Colloidal and molecular electro-optics

    NASA Astrophysics Data System (ADS)

    Palberg, Thomas; Löwen, Hartmut

    2010-12-01

    The Kerr effect, also known as the quadratic electro-optic effect, was discovered more than a hundred years ago by John Kerr, a Scottish physicist [1]. It describes the change in the refractive index of a material in response to an applied electric field. Around 1950 its application swayed from simple to complex fluids. A strong contribution was made through a number of seminal papers by the French polymer scientist H Benoit [2-4]. These and others initiated wide interest from researchers working on macromolecular solutions or colloidal dispersions. Experimental activities were further boosted by the advent of the laser and theoretical approaches strongly drew from growing computer power. Use of AC or pulsed field techniques, as well as of inhomogeneous fields, including laser tweezers, studies of electrophoretic, dielectrophoretic, electro-osmotic and other types of motion by advanced optical methods and combinations with other external fields have had the greatest impact on our understanding of the electric field induced optical properties of soft matter systems. Today the field has matured and its techniques are broadly employed as versatile tools with applications ranging from biological systems to electronic ink. Fundamental interest still continues but more and more side branches have evolved fruitfully. This collection of papers was, therefore, brought together to take a fresh look at this traditional field. Further, we are to celebrate 35 years of a successful conference series, ELOPTO, with the last one held at Waldthausen Castle hosted by the Johannes Gutenberg University, MainzNote1 and the DFG Collaborative Research Centre TR6 'Physics of colloidal dispersions in external fields'Note2. In this issue we have collected the articles of some of the leading experts in the area, well garnished with novel approaches and clever ideas by younger colleagues. With our selection we hope to cover a representative spectrum of the ongoing research, catch the most

  16. Serum and blister fluid pharmacokinetics and bactericidal activities of ampicillin-sulbactam, cefotetan, cefoxitin, ceftizoxime, and ticarcillin-clavulanate.

    PubMed

    Jaresko, G S; Barriere, S L; Johnson, B L

    1992-10-01

    Ampicillin-sulbactam, ticarcillin-clavulanate, cefoxitin, cefotetan, and ceftizoxime are promoted for the treatment of mixed aerobic-anaerobic bacterial infections. Their activities have been compared in vitro but not in vivo. In order to assess the in vivo activities of these agents in serum and interstitial fluid, we administered single, intravenous doses of these antimicrobial agents to healthy subjects. Concentrations of the antimicrobial agents in serum and suction-induced blister fluid and bactericidal activity were measured by high-pressure liquid chromatography and the standard methodology of the National Committee for Clinical Laboratory Standards, respectively. The organisms used for bactericidal activity tests were one isolate each of Staphylococcus aureus, Klebsiella pneumoniae, and Bacteroides fragilis. Pharmacokinetic parameters in serum and blister fluid were similar to those derived in other investigations. Of note were the high and prolonged concentrations of ticarcillin and cefotetan in blister fluid, despite high-level serum protein binding. The bactericidal activities in serum and blister fluid reflected the relative in vitro activities and kinetic dispositions of the various antimicrobial agents except for the bactericidal activity of cefotetan, which was substantially lower in blister fluid than serum, despite a blister fluid:serum area under the concentration-time curve ratio of 1.5. Similarly, the activity of ticarcillin-clavulanate in blister fluid was also substantially less than would have been predicted by the blister fluid:serum ratio of the area under the concentration-time curve of 1.1, possibly because of the low concentrations of clavulanate in blister fluid. The rankings of the in vivo bactericidal activities of the five drugs were as follows: for S. aureus, ampicillin-sulbactam > ticarcillin-clavulanate > ceftizoxime > cefoxitin > cefotetan; for K. pneumoniae, ceftizoxime > cefotetan > ampicillin-sulbactam = ticarcillin

  17. Effect of a fluid layer on the sound radiation of a plate and its active control

    NASA Astrophysics Data System (ADS)

    Sun, Yao; Pan, Jie; Yang, Tiejun

    2015-11-01

    In this paper, a baffled plate facing a layer of fluid is used to investigate the effects of the radiating environment on the plate's sound radiation and its active control. By varying the thickness of the fluid layer, different radiation environments are presented to the plate, resulting in a variation in the efficiencies and shapes of the radiation modes of the plate. As the design of feed-forward control of the radiated sound power and of feedback control of the vibration velocity or volume velocity is limited by the properties of the secondary control path (an open-loop frequency response function), the performance of the control system may be deteriorated if a controller optimally designed for one radiation environment is used for a different environment. The effects of radiation environment on the properties of the secondary control path and performance of active control are investigated.

  18. Biocatalytic synthesis of acrylates in supercritical fluids: tuning enzyme activity by changing pressure.

    PubMed Central

    Kamat, S V; Iwaskewycz, B; Beckman, E J; Russell, A J

    1993-01-01

    Supercritical fluids are a unique class of nonaqueous media in which biocatalytic reactions can occur. The physical properties of supercritical fluids, which include gas-like diffusivities and liquid-like densities, can be predictably controlled with changing pressure. This paper describes how adjustment of pressure, with the subsequent predictable changes of the dielectric constant and Hildebrand solubility parameter for fluoroform, ethane, sulfur hexafluoride, and propane, can be used to manipulate the activity of lipase in the transesterification of methylmethacrylate with 2-ethyl-1-hexanol. Of particular interest is that the dielectric constant of supercritical fluoroform can be tuned from approximately 1 to 8, merely by increasing pressure from 850 to 4000 psi (from 5.9 to 28 MPa). The possibility now exists to predictably alter both the selectivity and the activity of a biocatalyst merely by changing pressure. Images Fig. 6 PMID:8464910

  19. Transport of synthetic colloids through single saturated fractures: A literature review

    SciTech Connect

    Reimus, P.W.

    1995-07-01

    Colloids having the same surface charge sign as the bulk of the geologic media in a groundwater system may be able to travel through the system faster than soluble species because they will follow fluid streamlines more closely and they should have less tendency to diffuse into pores or dead spaces in the media than soluble species. Synthetic colloids with uniform, controlled properties may be ideal for serving as {open_quotes}worst-case{close_quotes} tracers that provide lower-bound estimates of contaminant travel times in hydrologic systems. This report discusses a review of the literature pertaining to colloid transport in single saturated natural fractures. After a brief background discussion to put the literature review in perspective, the phenomenon of colloid transport in saturated fractures is divided into three major topics, each of which is reviewed in detail: (1) saturated fluid flow through fractures; (2) colloid transport by convection, diffusion, and force fields; and (3) colloid interactions with surfaces. It is suggested that these phenomena be accounted for in colloid transport models by using (1) lubrication theory to describe water flow through fractures, (2) particle tracking methods to describe colloid transport in fractures, and (3) a kinetic boundary layer approximation to describe colloid interactions with fracture walls. These methods offer better computational efficiency and better experimental accessibility to model parameters than rigorously solving the complete governing equations.

  20. The effect of sitting and calf activity on leg fluid and snoring.

    PubMed

    Singh, Bhajan; Yadollahi, Azadeh; Lyons, Owen; Alshaer, Hisham; Bradley, T Douglas

    2017-02-16

    Prolonged sitting may promote leg fluid retention that redistributes to the neck during sleep and contributes to snoring. This could be attenuated by calf activity while sitting. In 16 healthy non-obese subjects we measured leg fluid volume (LFV) below the knees using bioelectrical impedance while sitting for 4h, snoring using a portable BresoDx™ device, and Mallampati grade. Using a double cross-over study design, subjects were randomized to one of two arms and crossed-over one week later: control arm - no calf exercise while sitting; intervention arm - calf contraction against a pedal resistance while sitting. The effects of sitting±calf activity on LFV and snoring were compared. We found that LFV increased by 216±101.0ml (p<0.0001) after sitting. Calf activity while sitting attenuated LFV by 53.8ml (p<0.0001) and, in all five subjects with severe upper airway narrowing (Mallampati grade IV), reduced snoring duration (from 357±132.9 to 116.2±72.1s/h, p=0.02) suggesting reduced overnight rostral fluid shift to the neck.

  1. Nucleation in food colloids

    NASA Astrophysics Data System (ADS)

    Povey, Malcolm J. W.

    2016-12-01

    Nucleation in food colloids has been studied in detail using ultrasound spectroscopy. Our data show that classical nucleation theory (CNT) remains a sound basis from which to understand nucleation in food colloids and analogous model systems using n-alkanes. Various interpretations and modifications of CNT are discussed with regard to their relevance to food colloids. Much of the evidence presented is based on the ultrasound velocity spectrometry measurements which has many advantages for the study of nucleating systems compared to light scattering and NMR due to its sensitivity at low solid contents and its ability to measure true solid contents in the nucleation and early crystal growth stages. Ultrasound attenuation spectroscopy also responds to critical fluctuations in the induction region. We show, however, that a periodic pressure fluctuation such as a quasi-continuous (as opposed to a pulse comprising only a few pressure cycles) ultrasound field can alter the nucleation process, even at very low acoustic intensity. Thus care must be taken when using ultrasound techniques that the measurements do not alter the studied processes. Quasi-continuous ultrasound fields may enhance or suppress nucleation and the criteria to determine such effects are derived. The conclusions of this paper are relevant to colloidal systems in foods, pharmaceuticals, agro-chemicals, cosmetics, and personal products.

  2. Dipolar colloids in apolar media: direct microscopy of two-dimensional suspensions

    PubMed Central

    Janai, Erez; Cohen, Avner P.; Butenko, Alexander V.; Schofield, Andrew B.; Schultz, Moty; Sloutskin, Eli

    2016-01-01

    Spherical colloids, in an absence of external fields, are commonly assumed to interact solely through rotationally-invariant potentials, u(r). While the presence of permanent dipoles in aqueous suspensions has been previously suggested by some experiments, the rotational degrees of freedom of spherical colloids are typically neglected. We prove, by direct experiments, the presence of permanent dipoles in commonly used spherical poly(methyl methacrylate) (PMMA) colloids, suspended in an apolar organic medium. We study, by a combination of direct confocal microscopy, computer simulations, and theory, the structure and other thermodynamical properties of organic suspensions of colloidal spheres, confined to a two-dimensional (2D) monolayer. Our studies reveal the effects of the dipolar interactions on the structure and the osmotic pressure of these fluids. These observations have far-reaching consequences for the fundamental colloidal science, opening new directions in self-assembly of complex colloidal clusters. PMID:27346611

  3. Dipolar colloids in apolar media: direct microscopy of two-dimensional suspensions

    NASA Astrophysics Data System (ADS)

    Janai, Erez; Cohen, Avner P.; Butenko, Alexander V.; Schofield, Andrew B.; Schultz, Moty; Sloutskin, Eli

    2016-06-01

    Spherical colloids, in an absence of external fields, are commonly assumed to interact solely through rotationally-invariant potentials, u(r). While the presence of permanent dipoles in aqueous suspensions has been previously suggested by some experiments, the rotational degrees of freedom of spherical colloids are typically neglected. We prove, by direct experiments, the presence of permanent dipoles in commonly used spherical poly(methyl methacrylate) (PMMA) colloids, suspended in an apolar organic medium. We study, by a combination of direct confocal microscopy, computer simulations, and theory, the structure and other thermodynamical properties of organic suspensions of colloidal spheres, confined to a two-dimensional (2D) monolayer. Our studies reveal the effects of the dipolar interactions on the structure and the osmotic pressure of these fluids. These observations have far-reaching consequences for the fundamental colloidal science, opening new directions in self-assembly of complex colloidal clusters.

  4. Postoperative fluid management

    PubMed Central

    Kayilioglu, Selami Ilgaz; Dinc, Tolga; Sozen, Isa; Bostanoglu, Akin; Cete, Mukerrem; Coskun, Faruk

    2015-01-01

    Postoperative care units are run by an anesthesiologist or a surgeon, or a team formed of both. Management of postoperative fluid therapy should be done considering both patients’ status and intraoperative events. Types of the fluids, amount of the fluid given and timing of the administration are the main topics that determine the fluid management strategy. The main goal of fluid resuscitation is to provide adequate tissue perfusion without harming the patient. The endothelial glycocalyx dysfunction and fluid shift to extracellular compartment should be considered wisely. Fluid management must be done based on patient’s body fluid status. Patients who are responsive to fluids can benefit from fluid resuscitation, whereas patients who are not fluid responsive are more likely to suffer complications of over-hydration. Therefore, common use of central venous pressure measurement, which is proved to be inefficient to predict fluid responsiveness, should be avoided. Goal directed strategy is the most rational approach to assess the patient and maintain optimum fluid balance. However, accessible and applicable monitoring tools for determining patient’s actual fluid need should be further studied and universalized. The debate around colloids and crystalloids should also be considered with goal directed therapies. Advantages and disadvantages of each solution must be evaluated with the patient’s specific condition. PMID:26261771

  5. 58th Colloid and surface science symposium: program and abstracts

    SciTech Connect

    Not Available

    1984-01-01

    These proceedings contain abstracts of 225 papers presented at the symposium. Papers are grouped under the following categories: dispersions in non-aqueous media; membrane transport and structure; rheology of dispersions and polymer solutions; micellization and microemulsions; fluid/fluid interfaces; spectroscopic characterization of solid/gas and solid/liquid interfaces; structure in concentrated systems; transport phenomena in colloidal systems; polymers at interfaces; and general papers.

  6. Effects of spatial variation of skull and cerebrospinal fluid layers on optical mapping of brain activities

    NASA Astrophysics Data System (ADS)

    Wang, Shuping; Shibahara, Nanae; Kuramashi, Daishi; Okawa, Shinpei; Kakuta, Naoto; Okada, Eiji; Maki, Atsushi; Yamada, Yukio

    2010-07-01

    In order to investigate the effects of anatomical variation in human heads on the optical mapping of brain activity, we perform simulations of optical mapping by solving the photon diffusion equation for layered-models simulating human heads using the finite element method (FEM). Particularly, the effects of the spatial variations in the thicknesses of the skull and cerebrospinal fluid (CSF) layers on mapping images are investigated. Mapping images of single active regions in the gray matter layer are affected by the spatial variations in the skull and CSF layer thicknesses, although the effects are smaller than those of the positions of the active region relative to the data points. The increase in the skull thickness decreases the sensitivity of the images to active regions, while the increase in the CSF layer thickness increases the sensitivity in general. The images of multiple active regions are also influenced by their positions relative to the data points and by their depths from the skin surface.

  7. COLLOIDS. Colloidal matter: Packing, geometry, and entropy.

    PubMed

    Manoharan, Vinothan N

    2015-08-28

    Colloidal particles with well-controlled shapes and interactions are an ideal experimental system for exploring how matter organizes itself. Like atoms and molecules, these particles form bulk phases such as liquids and crystals. But they are more than just crude analogs of atoms; they are a form of matter in their own right, with complex and interesting collective behavior not seen at the atomic scale. Their behavior is affected by geometrical or topological constraints, such as curved surfaces or the shapes of the particles. Because the interactions between the particles are often short-ranged, we can understand the effects of these constraints using geometrical concepts such as packing. The geometrical viewpoint gives us a window into how entropy affects not only the structure of matter, but also the dynamics of how it forms.

  8. Ordering, dynamics and phase transitions in charged colloids

    NASA Astrophysics Data System (ADS)

    Tata, B. V. R.; Jena, Sidhartha S.

    2006-09-01

    Among the various soft matter systems, charge stabilized colloidal dispersions have gained recognition as tremendously useful model condensed matter systems because of their structural ordering and the rich phase behavior. This paper is a review of the work done in the last few years related to structural ordering and phase transitions brought about by parameters such as pressure, surface charge density and salt concentration. The dynamics in colloidal crystals and dense suspensions is influenced by hydrodynamic interactions arising due to the intervening viscous fluid. Lattice dynamics of colloidal crystals presents a nice testing ground for theories of hydrodynamic interaction. Apart from reviewing the measurements of phonon dispersion curves in thin colloidal crystals, we present here recent dynamic light scattering results on bulk colloidal crystals. The dynamics in colloidal liquids and colloidal glasses are also covered. Though colloidal liquids of low charge density particles freeze into a homogenous crystalline or a glassy state, they remain inhomogeneous when the charge density is beyond a critical value. Recently, this inhomogeneous state is confirmed to be a gas-solid coexistence. This observation of gas-solid coexistence in highly charged colloids along with the earlier observations of vapor-liquid condensation and a reentrant transition have created a debate on the existence of long-range attraction in the effective pair potential U(r) of like-charged colloidal particles. U(r) was measured directly using optical microscopy. However, the limitations in using the optical microscopy technique for determining U(r) in dilute suspensions are discussed. These limitations can be circumvented by employing confocal microscopy. We present our recent observation of stable bound pairs in very dilute and highly charged colloidal suspensions using confocal microscopy and the existence of an attractive minimum in the measured U(r) of like-charged particles. These

  9. Melting line of charged colloids from primitive model simulations.

    PubMed

    Hynninen, Antti-Pekka; Dijkstra, Marjolein

    2005-12-22

    We develop an efficient simulation method to study suspensions of charged spherical colloids using the primitive model. In this model, the colloids and the co- and counterions are represented by charged hard spheres, whereas the solvent is treated as a dielectric continuum. In order to speed up the simulations, we restrict the positions of the particles to a cubic lattice, which allows precalculation of the Coulombic interactions at the beginning of the simulation. Moreover, we use multiparticle cluster moves that make the Monte Carlo sampling more efficient. The simulations are performed in the semigrand canonical ensemble, where the chemical potential of the salt is fixed. Employing our method, we study a system consisting of colloids carrying a charge of 80 elementary charges and monovalent co- and counterions. At the colloid densities of our interest, we show that lattice effects are negligible for sufficiently fine lattices. We determine the fluid-solid melting line in a packing fraction eta-inverse screening length kappa plane and compare it with the melting line of charged colloids predicted by the Yukawa potential of the Derjaguin-Landau-Verwey-Overbeek theory. We find qualitative agreement with the Yukawa results, and we do not find any effects of many-body interactions. We discuss the difficulties involved in the mapping between the primitive model and the Yukawa model at high colloid packing fractions (eta>0.2).

  10. Non-equilibrium phenomena in disordered colloidal solids

    NASA Astrophysics Data System (ADS)

    Yunker, Peter

    Colloidal particles are a convenient tool for studying a variety of non-equilibrium phenomena. I will discuss experiments that investigate the aging and non-equilibrium growth of disordered solids. In the first set of experiments, colloidal glasses are rapidly formed to study aging in jammed packings. A colloidal fluid, composed of micron-sized temperature-sensitive pNIPAM particles, is rapidly quenched into a colloidal glass. After the glass is formed, collective rearrangements occur as the glass ages. Particles that undergo irreversible rearrangements, which break nearest-neighbor pairings and allow the glass to relax, are identified. These irreversible rearrangements are accompanied by large clusters of fast moving particles; the number of particles involved in these clusters increases as the glass ages, leading to the slowing of dynamics that is characteristic of aging. In the second set of experiments, we study the role particle shape, and thus, interparticle interaction, plays in the formation of disordered solids with different structural and mechanical properties. Aqueous suspensions of colloidal particles with different shapes evaporate on glass slides. Convective flows during evaporation carry particles from drop center to drop edge, where they accumulate. The resulting particle deposits grow heterogeneously from the edge on the air-water interface. Three distinct growth processes were discovered in the evaporating colloidal suspensions by tuning particle shape-dependent capillary interactions and thus varying the microscopic rules of deposition. Mechanical testing of these particulate deposits reveals that the deposit bending rigidity increases as particles become more anisotropic in shape.

  11. Temperature dependence of the colloidal agglomeration inhibition: computer simulation study.

    PubMed

    Barcenas, Mariana; Douda, Janna; Duda, Yurko

    2007-09-21

    There exist experimental evidences that the structure and extension of colloidal aggregates in suspensions change dramatically with temperature. This results in an associated change in the suspension rheology. Experimental studies of the inhibitor applications to control the particle clustering have revealed some unexpected tendencies. Namely, the heating of colloidal suspensions has provoked either extension or reduction of the colloidal aggregates. To elucidate the origin of this behavior, we investigate the influence of temperature on the stabilizing effect of the inhibitor, applying an associative two-component fluid model. Our results of the canonical Monte Carlo simulations indicate that the anomalous effect of the temperature may not be necessarily explained by the temperature dependent changes in the inhibitor tail conformation, as has been suggested recently by Won et al. [Langmuir 21, 924 (2005)]. We show that the competition between colloid-colloid and colloid-inhibitor associations, which, in turn, depends on the temperature and the relative concentrations, may be one of the main reasons for the unexpected temperature dependence of inhibitor efficacy.

  12. Surface Properties and Photocatalytic Activities of the Colloidal ZnS:Mn Nanocrystals Prepared at Various pH Conditions

    PubMed Central

    Heo, Jungho; Hwang, Cheong-Soo

    2015-01-01

    Water-dispersible ZnS:Mn nanocrystals (NC) were synthesized by capping the surface with mercaptoacetic acid (MAA) molecules at three different pH conditions. The obtained ZnS:Mn-MAA NC products were physically and optically characterized by corresponding spectroscopic methods. The UV-Visible absorption spectra and PL emission spectra showed broad peaks at 310 and 590 nm, respectively. The average particle sizes measured from the HR-TEM images were 5 nm, which were also supported by the Debye-Scherrer calculations using the X-ray diffraction (XRD) data. Moreover, the surface charges and the degrees of aggregation of the ZnS:Mn-MAA NCs were determined by electrophoretic and hydrodynamic light scattering methods, indicating formation of agglomerates in water with various sizes (50–440 nm) and different surface charge values accordingly the preparation conditions of the NCs (−7.59 to −24.98 mV). Finally, the relative photocatalytic activities of the ZnS:Mn-MAA NCs were evaluated by measuring the degradation rate of methylene blue (MB) molecule in a pseudo first-order reaction condition under the UV-visible light irradiation. As a result, the ZnS:Mn-MAA NC prepared at the pH 7 showed the best photo-degradation efficiency of the MB molecule with the first-order rate constant (kobs) of 2.0 × 10−3·min−1. PMID:28347105

  13. Colloidal Double Quantum Dots

    PubMed Central

    2016-01-01

    Conspectus Pairs of coupled quantum dots with controlled coupling between the two potential wells serve as an extremely rich system, exhibiting a plethora of optical phenomena that do not exist in each of the isolated constituent dots. Over the past decade, coupled quantum systems have been under extensive study in the context of epitaxially grown quantum dots (QDs), but only a handful of examples have been reported with colloidal QDs. This is mostly due to the difficulties in controllably growing nanoparticles that encapsulate within them two dots separated by an energetic barrier via colloidal synthesis methods. Recent advances in colloidal synthesis methods have enabled the first clear demonstrations of colloidal double quantum dots and allowed for the first exploratory studies into their optical properties. Nevertheless, colloidal double QDs can offer an extended level of structural manipulation that allows not only for a broader range of materials to be used as compared with epitaxially grown counterparts but also for more complex control over the coupling mechanisms and coupling strength between two spatially separated quantum dots. The photophysics of these nanostructures is governed by the balance between two coupling mechanisms. The first is via dipole–dipole interactions between the two constituent components, leading to energy transfer between them. The second is associated with overlap of excited carrier wave functions, leading to charge transfer and multicarrier interactions between the two components. The magnitude of the coupling between the two subcomponents is determined by the detailed potential landscape within the nanocrystals (NCs). One of the hallmarks of double QDs is the observation of dual-color emission from a single nanoparticle, which allows for detailed spectroscopy of their properties down to the single particle level. Furthermore, rational design of the two coupled subsystems enables one to tune the emission statistics from single

  14. Colloidal Double Quantum Dots.

    PubMed

    Teitelboim, Ayelet; Meir, Noga; Kazes, Miri; Oron, Dan

    2016-05-17

    Pairs of coupled quantum dots with controlled coupling between the two potential wells serve as an extremely rich system, exhibiting a plethora of optical phenomena that do not exist in each of the isolated constituent dots. Over the past decade, coupled quantum systems have been under extensive study in the context of epitaxially grown quantum dots (QDs), but only a handful of examples have been reported with colloidal QDs. This is mostly due to the difficulties in controllably growing nanoparticles that encapsulate within them two dots separated by an energetic barrier via colloidal synthesis methods. Recent advances in colloidal synthesis methods have enabled the first clear demonstrations of colloidal double quantum dots and allowed for the first exploratory studies into their optical properties. Nevertheless, colloidal double QDs can offer an extended level of structural manipulation that allows not only for a broader range of materials to be used as compared with epitaxially grown counterparts but also for more complex control over the coupling mechanisms and coupling strength between two spatially separated quantum dots. The photophysics of these nanostructures is governed by the balance between two coupling mechanisms. The first is via dipole-dipole interactions between the two constituent components, leading to energy transfer between them. The second is associated with overlap of excited carrier wave functions, leading to charge transfer and multicarrier interactions between the two components. The magnitude of the coupling between the two subcomponents is determined by the detailed potential landscape within the nanocrystals (NCs). One of the hallmarks of double QDs is the observation of dual-color emission from a single nanoparticle, which allows for detailed spectroscopy of their properties down to the single particle level. Furthermore, rational design of the two coupled subsystems enables one to tune the emission statistics from single photon

  15. EDITORIAL: Colloidal dispersions in external fields Colloidal dispersions in external fields

    NASA Astrophysics Data System (ADS)

    Löwen, Hartmut

    2012-11-01

    Colloidal dispersions have long been proven as pivotal model systems for equilibrium phase transition such as crystallization, melting and liquid-gas phase transition. The last decades have revealed that this is also true for nonequilibrium phenomena. In fact, the fascinating possibility to track the individual trajectories of colloidal particles has greatly advanced our understanding of collective behaviour in classical many-body systems and has helped to reveal the underlying physical principles of glass transition, crystal nucleation, and interfacial dynamics (to name just a few typical nonequilibrium effects). External fields can be used to bring colloids out of equilibrium in a controlled way. Different kinds of external fields can be applied to colloidal dispersions, namely shear flow, electric, magnetic and laser-optical fields, and confinement. Typical research areas can be sketched with the by now traditional complexity diagram (figure 1). The complexity of the colloidal system itself as embodied in statistical degrees of freedom is shown on the x-axis while the complexity of the problem posed, namely bulk, an inhomogeneity in equilibrium, steady state nonequilibrium and full time-dependent nonequilibrium are shown on the y-axis. The different external fields which can be imposed are indicated by the different hatched areas. figure1 Figure 1. Diagram of complexity for colloidal dispersions in external fields: while the x-axis shows the complexity of the system, the y-axis shows the complexity of the problem. Regions which can be accessed by different kinds of external fields are indicated. The arrows indicate recent research directions. Active particles are also indicated with a special complexity of internal degrees of freedom [1]. This collection of papers reflects the scientific programme of the International Conference on Colloidal Dispersions in External Fields III (CODEF III) which took place in Bonn-Bad Godesberg from 20-23 March 2012. This was the

  16. Complement (C5)-derived chemotactic activity accounts for accumulation of polymorphonuclear leukocytes in cerebrospinal fluid of rabbits with pneumococcal meningitis.

    PubMed Central

    Ernst, J D; Hartiala, K T; Goldstein, I M; Sande, M A

    1984-01-01

    Experiments were performed to identify the chemoattractant for polymorphonuclear leukocytes that appears in the cerebrospinal fluid of rabbits with experimental pneumococcal meningitis. Meningitis was induced in anesthetized New Zealand white rabbits by injecting 10(4) cells of stationary-phase Streptococcus pneumoniae type III intracisternally. Before bacteria were injected, cerebrospinal fluid contained neither polymorphonuclear leukocytes nor chemotactic activity. Significant chemotactic activity for rabbit polymorphonuclear leukocytes was detected 12 h after inoculation with bacteria and was maximal after 18 to 20 h. Chemotactic activity appeared in cerebrospinal fluid while concentrations of pneumococci and total protein were increasing but before there was any accumulation of polymorphonuclear leukocytes. The chemotactic activity in cerebrospinal fluid was heat stable (56 degrees C for 30 min), eluted from Sephadex G-75 with a profile identical to that of the chemotactic activity in zymosan-activated rabbit serum, and was inhibited by treatment with antibodies to native human C5. In addition, preincubation of polymorphonuclear leukocytes with partially purified rabbit C5a selectively inhibited their subsequent chemotactic responses to cerebrospinal fluid. These data indicate that complement (C5)-derived chemotactic activity appears in cerebrospinal fluid during the course of experimental pneumococcal meningitis in rabbits and suggest that this activity accounts for the accumulation of polymorphonuclear leukocytes observed in this infection. PMID:6480117

  17. Spontaneous activity of cochlear hair cells triggered by fluid secretion mechanism in adjacent support cells

    PubMed Central

    Wang, Han Chin; Lin, Chun-Chieh; Cheung, Rocky; Zhang-Hooks, YingXin; Agarwal, Amit; Ellis-Davies, Graham; Rock, Jason; Bergles, Dwight E.

    2015-01-01

    Summary Spontaneous electrical activity of neurons in developing sensory systems promotes their maturation and proper connectivity. In the auditory system, spontaneous activity of cochlear inner hair cells (IHCs) is initiated by the release of ATP from glia-like inner supporting cells (ISCs), facilitating maturation of central pathways before hearing onset. Here, we find that ATP stimulates purinergic autoreceptors in ISCs, triggering Cl− efflux and osmotic cell shrinkage by opening TMEM16A Ca2+-activated Cl− channels. Release of Cl− from ISCs also forces K+ efflux, causing transient depolarization of IHCs near ATP release sites. Genetic deletion of TMEM16A markedly reduces the spontaneous activity of IHCs and spiral ganglion neurons in the developing cochlea, and prevents ATP-dependent shrinkage of supporting cells. These results indicate that support cells in the developing cochlea have adapted a pathway used for fluid secretion in other organs to induce periodic excitation of hair cells. PMID:26627734

  18. Antimicrobial activity and composition profile of grape (Vitis vinifera) pomace extracts obtained by supercritical fluids.

    PubMed

    Oliveira, Daniela A; Salvador, Ana Augusta; Smânia, Artur; Smânia, Elza F A; Maraschin, Marcelo; Ferreira, Sandra R S

    2013-04-10

    The possibility of increasing the aggregated value of the huge amount of residues generated by wineries around the world foment studies using the grape pomace - the residue from the wine production, composed by seed, skin and stems - to obtain functional ingredients. Nowadays, consumers in general prefer natural and safe products mainly for food and cosmetic fields, where the supercritical fluid extraction is of great importance due to the purity of the extracts provided. Therefore, the objective of this work is to evaluate the global extraction yield, the antimicrobial activity and the composition profile of Merlot and Syrah grape pomace extracts obtained by supercritical CO2 (SC-CO2) and CO2 added with co-solvent at pressures up to 300 bar and temperatures of 50 and 60 °C. The results were compared with the ones obtained by Soxhlet and by ultrasound-assisted leaching extraction methods. The main components from the extracts, identified by HPLC, were gallic acid, p-OH-benzoic acid, vanillic acid and epicatechin. The antibacterial and antifungal activities of the extracts were evaluated using four strains of bacteria (Staphylococcus aureus, Bacillus cereus, Escherichia coli and Pseudomonas aeruginosa) and three fungi strains (Candida albicans, Candida parapsilosis, Candida krusei). Despite lower extraction yield results, the supercritical fluid extracts presented the highest antimicrobial effectiveness compared to the other grape pomace extracts due to the presence of antimicrobial active compounds. Syrah extracts were less efficient against the microorganisms tested and Merlot extracts were more active against Gram-positive bacteria.

  19. Centrifugation-assisted Assembly of Colloidal Silica into Crack-Free and Transferrable Films with Tunable Crystalline Structures

    PubMed Central

    Fan, Wen; Chen, Min; Yang, Shu; Wu, Limin

    2015-01-01

    Self-assembly of colloidal particles into colloidal films has many actual and potential applications. While various strategies have been developed to direct the assembly of colloidal particles, fabrication of crack-free and transferrable colloidal film with controllable crystal structures still remains a major challenge. Here we show a centrifugation-assisted assembly of colloidal silica spheres into free-standing colloidal film by using the liquid/liquid interfaces of three immiscible phases. Through independent control of centrifugal force and interparticle electrostatic repulsion, polycrystalline, single-crystalline and quasi-amorphous structures can be readily obtained. More importantly, by dehydration of silica particles during centrifugation, the spontaneous formation of capillary water bridges between particles enables the binding and pre-shrinkage of the assembled array at the fluid interface. Thus the assembled colloidal films are not only crack-free, but also robust and flexible enough to be easily transferred on various planar and curved substrates. PMID:26159121

  20. Centrifugation-assisted Assembly of Colloidal Silica into Crack-Free and Transferrable Films with Tunable Crystalline Structures.

    PubMed

    Fan, Wen; Chen, Min; Yang, Shu; Wu, Limin

    2015-07-10

    Self-assembly of colloidal particles into colloidal films has many actual and potential applications. While various strategies have been developed to direct the assembly of colloidal particles, fabrication of crack-free and transferrable colloidal film with controllable crystal structures still remains a major challenge. Here we show a centrifugation-assisted assembly of colloidal silica spheres into free-standing colloidal film by using the liquid/liquid interfaces of three immiscible phases. Through independent control of centrifugal force and interparticle electrostatic repulsion, polycrystalline, single-crystalline and quasi-amorphous structures can be readily obtained. More importantly, by dehydration of silica particles during centrifugation, the spontaneous formation of capillary water bridges between particles enables the binding and pre-shrinkage of the assembled array at the fluid interface. Thus the assembled colloidal films are not only crack-free, but also robust and flexible enough to be easily transferred on various planar and curved substrates.

  1. Applications of supercritical fluids.

    PubMed

    Brunner, Gerd

    2010-01-01

    This review discusses supercritical fluids in industrial and near-to-industry applications. Supercritical fluids are flexible tools for processing materials. Supercritical fluids have been applied to mass-transfer processes, phase-transition processes, reactive systems, materials-related processes, and nanostructured materials. Some applications are already at industrial capacity, whereas others remain under development. In addition to extraction, application areas include impregnation and cleaning, multistage countercurrent separation, particle formation, coating, and reactive systems such as hydrogenation, biomass gasification, and supercritical water oxidation. Polymers are modified with supercritical fluids, and colloids and emulsions as well as nanostructured materials exhibit interesting phenomena when in contact with supercritical fluids that can be industrially exploited. For these applications to succeed, the properties of supercritical fluids in combination with the materials processed must be clearly determined and fundamental knowledge of the complex behavior must be made readily available.

  2. Fractal nematic colloids

    PubMed Central

    Hashemi, S. M.; Jagodič, U.; Mozaffari, M. R.; Ejtehadi, M. R.; Muševič, I.; Ravnik, M.

    2017-01-01

    Fractals are remarkable examples of self-similarity where a structure or dynamic pattern is repeated over multiple spatial or time scales. However, little is known about how fractal stimuli such as fractal surfaces interact with their local environment if it exhibits order. Here we show geometry-induced formation of fractal defect states in Koch nematic colloids, exhibiting fractal self-similarity better than 90% over three orders of magnitude in the length scales, from micrometers to nanometres. We produce polymer Koch-shaped hollow colloidal prisms of three successive fractal iterations by direct laser writing, and characterize their coupling with the nematic by polarization microscopy and numerical modelling. Explicit generation of topological defect pairs is found, with the number of defects following exponential-law dependence and reaching few 100 already at fractal iteration four. This work demonstrates a route for generation of fractal topological defect states in responsive soft matter. PMID:28117325

  3. Fractal nematic colloids

    NASA Astrophysics Data System (ADS)

    Hashemi, S. M.; Jagodič, U.; Mozaffari, M. R.; Ejtehadi, M. R.; Muševič, I.; Ravnik, M.

    2017-01-01

    Fractals are remarkable examples of self-similarity where a structure or dynamic pattern is repeated over multiple spatial or time scales. However, little is known about how fractal stimuli such as fractal surfaces interact with their local environment if it exhibits order. Here we show geometry-induced formation of fractal defect states in Koch nematic colloids, exhibiting fractal self-similarity better than 90% over three orders of magnitude in the length scales, from micrometers to nanometres. We produce polymer Koch-shaped hollow colloidal prisms of three successive fractal iterations by direct laser writing, and characterize their coupling with the nematic by polarization microscopy and numerical modelling. Explicit generation of topological defect pairs is found, with the number of defects following exponential-law dependence and reaching few 100 already at fractal iteration four. This work demonstrates a route for generation of fractal topological defect states in responsive soft matter.

  4. Fractal nematic colloids.

    PubMed

    Hashemi, S M; Jagodič, U; Mozaffari, M R; Ejtehadi, M R; Muševič, I; Ravnik, M

    2017-01-24

    Fractals are remarkable examples of self-similarity where a structure or dynamic pattern is repeated over multiple spatial or time scales. However, little is known about how fractal stimuli such as fractal surfaces interact with their local environment if it exhibits order. Here we show geometry-induced formation of fractal defect states in Koch nematic colloids, exhibiting fractal self-similarity better than 90% over three orders of magnitude in the length scales, from micrometers to nanometres. We produce polymer Koch-shaped hollow colloidal prisms of three successive fractal iterations by direct laser writing, and characterize their coupling with the nematic by polarization microscopy and numerical modelling. Explicit generation of topological defect pairs is found, with the number of defects following exponential-law dependence and reaching few 100 already at fractal iteration four. This work demonstrates a route for generation of fractal topological defect states in responsive soft matter.

  5. Dissipative Particle Dynamics simulation of colloidal suspensions

    NASA Astrophysics Data System (ADS)

    Jamali, Safa; Boromand, Arman; Maia, Joao

    2014-03-01

    DPD as a mesoscale method was firstly proposed to study dynamics of suspensions under flow condition. However the proposed method failed to capture shear properties of suspensions because it lacked: first a potential to reproduce lubrication forces and second a clear definition for the colloid surface. Recently we reported a modified DPD method which defines colloidal particles as particles with hard core and a dissipative coat. An additional lubrication force was introduced to include the short-range hydrodynamics that are not captured in original DPD. The model was found to be able to reproduce shear properties of suspensions for a wide range of different systems, from monodisperse to bimodal with different volume fractions, compositions and size ratios. In present work our modified DPD method is employed to study both equilibrium and flow properties of colloidal suspension. Zero shear viscosity of suspension is measured using Green-Kubo expressions and the results are compared to theoretical predictions. Furthermore, structure formation in suspensions is studied in respect to energy landscape of the fluid both at rest and under flow.

  6. Colloidal Covalent Organic Frameworks

    PubMed Central

    2017-01-01

    Covalent organic frameworks (COFs) are two- or three-dimensional (2D or 3D) polymer networks with designed topology and chemical functionality, permanent porosity, and high surface areas. These features are potentially useful for a broad range of applications, including catalysis, optoelectronics, and energy storage devices. But current COF syntheses offer poor control over the material’s morphology and final form, generally providing insoluble and unprocessable microcrystalline powder aggregates. COF polymerizations are often performed under conditions in which the monomers are only partially soluble in the reaction solvent, and this heterogeneity has hindered understanding of their polymerization or crystallization processes. Here we report homogeneous polymerization conditions for boronate ester-linked, 2D COFs that inhibit crystallite precipitation, resulting in stable colloidal suspensions of 2D COF nanoparticles. The hexagonal, layered structures of the colloids are confirmed by small-angle and wide-angle X-ray scattering, and kinetic characterization provides insight into the growth process. The colloid size is modulated by solvent conditions, and the technique is demonstrated for four 2D boronate ester-linked COFs. The diameter of individual COF nanoparticles in solution is monitored and quantified during COF growth and stabilization at elevated temperature using in situ variable-temperature liquid cell transmission electron microscopy imaging, a new characterization technique that complements conventional bulk scattering techniques. Solution casting of the colloids yields a free-standing transparent COF film with retained crystallinity and porosity, as well as preferential crystallite orientation. Collectively this structural control provides new opportunities for understanding COF formation and designing morphologies for device applications. PMID:28149954

  7. Effects of Intense Physical Activity with Free Water Replacement on Bioimpedance Parameters and Body Fluid Estimates

    NASA Astrophysics Data System (ADS)

    Neves, E. B.; Ulbricht, L.; Krueger, E.; Romaneli, E. F. R.; Souza, M. N.

    2012-12-01

    Authors have emphasized the need for previous care in order to perform reliable bioimpedance acquisition. Despite of this need some authors have reported that intense physical training has little effect on Bioimpedance Analysis (BIA), while other ones have observed significant effects on bioimpedance parameters in the same condition, leading to body composition estimates considered incompatible with human physiology. The aim of this work was to quantify the changes in bioimpedance parameters, as well as in body fluids estimates by BIA, after four hours of intense physical activity with free water replacement in young males. Xitron Hydra 4200 equipment was used to acquire bioimpedance data before and immediately after the physical training. After data acquisition body fluids were estimates from bioimpedance parameters. Height and weight of all subjects were also acquired to the nearest 0.1 cm and 0.1 kg, respectively. Results point that among the bioimpedance parameter, extracellular resistance presented the most coherent behavior, leading to reliable estimates of the extracellular fluid and part of the total body water. Results also show decreases in height and weight of the participants, which were associated to the decrease in body hydration and in intervertebral discs.

  8. Fluid shear stress stimulates MATE2-K expression via Nrf2 pathway activation.

    PubMed

    Fukuda, Yasunori; Kaishima, Misato; Ohnishi, Toshiyuki; Tohyama, Kimio; Chisaki, Ikumi; Nakayama, Yusuke; Ogasawara-Shimizu, Mari; Kawamata, Yuji

    2017-03-04

    Accurate prediction of drug-induced renal toxicity is necessary for development of safer drugs for patients. Cellular assay systems that recapitulate physiologically relevant microenvironments have been proposed for correct estimation of drug responses in the human body. However, establishment of such assay systems for accurate prediction of renal toxicity is challenging because of the lack of readily available in vitro assay systems. In this study, we investigated the cellular response to fluid shear stress, which is a characteristic of the environment in the kidney proximal tubules, using microfluidic devices. The global gene expression profiles of human primary proximal tubule cells under the fluidic conditions revealed upregulation of MATE2-K and activation of Nrf2 signaling in response to fluid shear stress. Network and cell biological analysis additionally showed that expression of MATE2-K is regulated by Nrf2 signaling. These results strongly suggest that fluid shear stress is involved in the expression and maintenance of function of tissue-specific drug transporters in the proximal tubule, where the cells are exposed to continuous shear stress by primary urine. Furthermore, the microfluidic culture of human proximal tubules was demonstrated to be a useful system to analyze the regulatory mechanisms of gene expression in physiologically relevant cell conditions.

  9. Advanced Colloids Experiment (ACE) Science Overview

    NASA Technical Reports Server (NTRS)

    Meyer, William V.; Sicker, Ronald J.; Chiaramonte, Francis P.; Luna, Unique J.; Chaiken, Paul M.; Hollingsworth, Andrew; Secanna, Stefano; Weitz, David; Lu, Peter; Yodh, Arjun; Yunker, Peter; Lohr, Matthew; Gratale, Matthew; Lynch, Matthew; Kodger, Thomas; Piazza, Roberto; Buzzaccaro, Stefano; Cipelletti, Luca; Schall, Peter; Veen, Sandra; Wegdam, Gerhard; Lee, Chand-Soo; Choi, Chang-Hyung; Paul, Anna-Lisa; Ferl, Robert J.; Cohen, Jacob

    2013-01-01

    The Advanced Colloids Experiment is being conducted on the International Space Station (ISS) using the Light Microscopy Module (LMM) in the Fluids Integrated Rack (FIR). Work to date will be discussed and future plans and opportunities will be highlighted. The LMM is a microscope facility designed to allow scientists to process, manipulate, and characterize colloidal samples in micro-gravity where the absence of gravitational settling and particle jamming enables scientists to study such things as:a.The role that disordered and ordered-packing of spheres play in the phase diagram and equation of state of hard sphere systems,b.crystal nucleation and growth, growth instabilities, and the glass transition, c.gelation and phase separation of colloid polymer mixtures,d.crystallization of colloidal binary alloys,e.competition between crystallization and phase separation,f.effects of anisotropy and specific interactions on packing, aggregation, frustration and crystallization,g.effects of specific reversible and irreversible interactions mediated in the first case by hybridization of complementary DNA strands attached to separate colloidal particles,h.Lock and key interactions between colloids with dimples and spheres which match the size and shape of the dimples,i.finding the phase diagrams of isotropic and interacting particles,j.new techniques for complex self-assembly including scenarios for self-replication, k.critical Casimir forces,l.biology (real and model systems) in microgravity,m.etc. By adding additional microscopy capabilities to the existing LMM, NASA will increase the tools available for scientists that fly experiments on the ISS enabling scientists to observe directly what is happening at the particle level. Presently, theories are needed to bridge the gap between what is being observed (at a macroscopic level when photographing samples) with what is happening at a particle (or microscopic) level. What is happening at a microscopic level will be directly

  10. Combustion, Complex Fluids, and Fluid Physics Experiments on the ISS

    NASA Technical Reports Server (NTRS)

    Motil, Brian; Urban, David

    2012-01-01

    From the very first days of human spaceflight, NASA has been conducting experiments in space to understand the effect of weightlessness on physical and chemically reacting systems. NASA Glenn Research Center (GRC) in Cleveland, Ohio has been at the forefront of this research looking at both fundamental studies in microgravity as well as experiments targeted at reducing the risks to long duration human missions to the moon, Mars, and beyond. In the current International Space Station (ISS) era, we now have an orbiting laboratory that provides the highly desired condition of long-duration microgravity. This allows continuous and interactive research similar to Earth-based laboratories. Because of these capabilities, the ISS is an indispensible laboratory for low gravity research. NASA GRC has been actively involved in developing and operating facilities and experiments on the ISS since the beginning of a permanent human presence on November 2, 2000. As the lead Center both Combustion, Fluid Physics, and Acceleration Measurement GRC has led the successful implementation of an Acceleration Measurement systems, the Combustion Integrated Rack (CIR), the Fluids Integrated Rack (FIR) as well as the continued use of other facilities on the ISS. These facilities have supported combustion experiments in fundamental droplet combustion fire detection fire extinguishment soot phenomena flame liftoff and stability and material flammability. The fluids experiments have studied capillary flow magneto-rheological fluids colloidal systems extensional rheology pool and nucleate boiling phenomena. In this paper, we provide an overview of the experiments conducted on the ISS over the past 12 years. We also provide a look to the future development. Experiments presented in combustion include areas such as droplet combustion, gaseous diffusion flames, solid fuels, premixed flame studies, fire safety, and super critical oxidation processes. In fluid physics, experiments are discussed in

  11. Equilibrium Shape of Colloidal Crystals.

    PubMed

    Sehgal, Ray M; Maroudas, Dimitrios

    2015-10-27

    Assembling colloidal particles into highly ordered configurations, such as photonic crystals, has significant potential for enabling a broad range of new technologies. Facilitating the nucleation of colloidal crystals and developing successful crystal growth strategies require a fundamental understanding of the equilibrium structure and morphology of small colloidal assemblies. Here, we report the results of a novel computational approach to determine the equilibrium shape of assemblies of colloidal particles that interact via an experimentally validated pair potential. While the well-known Wulff construction can accurately capture the equilibrium shape of large colloidal assemblies, containing O(10(4)) or more particles, determining the equilibrium shape of small colloidal assemblies of O(10) particles requires a generalized Wulff construction technique which we have developed for a proper description of equilibrium structure and morphology of small crystals. We identify and characterize fully several "magic" clusters which are significantly more stable than other similarly sized clusters.

  12. A 2D suspension of active agents: the role of fluid mediated interactions.

    PubMed

    Behmadi, Hojjat; Fazli, Zahra; Najafi, Ali

    2017-03-22

    Taking into account both the Vicsek short-range ordering and the far-field hydrodynamic interactions mediated by the ambient fluid, we investigate the role of long-range interactions in the ordering phenomena in a quasi 2-dimensional active suspension. By studying the number fluctuations, the velocity correlation functions and cluster size distribution function, we show that depending on the number density of swimmers and the strength of noise, the hydrodynamic interactions can have significant effects in a suspension. For a fixed value of noise, at larger density of particles, long-range interactions enhance the particle pairing and cluster formation in the system.

  13. A 2D suspension of active agents: the role of fluid mediated interactions

    NASA Astrophysics Data System (ADS)

    Behmadi, Hojjat; Fazli, Zahra; Najafi, Ali

    2017-03-01

    Taking into account both the Vicsek short-range ordering and the far-field hydrodynamic interactions mediated by the ambient fluid, we investigate the role of long-range interactions in the ordering phenomena in a quasi 2-dimensional active suspension. By studying the number fluctuations, the velocity correlation functions and cluster size distribution function, we show that depending on the number density of swimmers and the strength of noise, the hydrodynamic interactions can have significant effects in a suspension. For a fixed value of noise, at larger density of particles, long-range interactions enhance the particle pairing and cluster formation in the system.

  14. Heat and Mass Transfer in Unsteady Rotating Fluid Flow with Binary Chemical Reaction and Activation Energy

    PubMed Central

    Awad, Faiz G.; Motsa, Sandile; Khumalo, Melusi

    2014-01-01

    In this study, the Spectral Relaxation Method (SRM) is used to solve the coupled highly nonlinear system of partial differential equations due to an unsteady flow over a stretching surface in an incompressible rotating viscous fluid in presence of binary chemical reaction and Arrhenius activation energy. The velocity, temperature and concentration distributions as well as the skin-friction, heat and mass transfer coefficients have been obtained and discussed for various physical parametric values. The numerical results obtained by (SRM) are then presented graphically and discussed to highlight the physical implications of the simulations. PMID:25250830

  15. Evidence of cellular immune activation in children with opsoclonus-myoclonus: cerebrospinal fluid neopterin.

    PubMed

    Pranzatelli, Michael R; Hyland, Keith; Tate, Elizabeth D; Arnold, Lauren A; Allison, Tyler J; Soori, Gamini S

    2004-12-01

    To evaluate cellular immune activation in opsoclonus-myoclonus syndrome, we measured the inflammatory marker neopterin in the cerebrospinal fluid of 16 children with opsoclonus-myoclonus and neuroblastoma, 24 children with opsoclonus-myoclonus but no tumor, and 19 age-matched controls. The mean concentration in opsoclonus-myoclonus was 2.3-fold higher than in controls (P = .008). Neopterin was greatly elevated in four of the most neurologically severe cases, up to 8.3-fold above the highest control level. Thirteen of the 40 children with opsoclonus-myoclonus but no controls had a neopterin concentration >2 SD above the control mean (P = .005). In this high neopterin subgroup, neurologic severity was significantly greater and the duration of neurologic symptoms was less. In 16 children re-examined on immunotherapy, including adrenocorticotropic hormone (ACTH) combination therapy, treatment was associated with a significant reduction in both neopterin and neurologic severity. Neopterin did not differ significantly between the tumor and non-tumor opsoclonus-myoclonus etiologies. No abnormalities of tetrahydrobiopterin were found. Although cerebrospinal fluid neopterin lacked the sensitivity to be a biomarker of disease activity in opsoclonus-myoclonus, elevated concentrations do support a role for T-cell activation and cell-mediated immunity in its pathophysiology.

  16. Buckling Instability of Self-Assembled Colloidal Columns

    NASA Astrophysics Data System (ADS)

    Swan, James W.; Vasquez, Paula A.; Furst, Eric M.

    2014-09-01

    Suspended, slender self-assembled domains of magnetically responsive colloids are observed to buckle in microgravity. Upon cessation of the magnetic field that drives their assembly, these columns expand axially and buckle laterally. This phenomenon resembles the buckling of long beams due to thermal expansion; however, linear stability analysis predicts that the colloidal columns are inherently susceptible to buckling because they are freely suspended in a Newtonian fluid. The dominant buckling wavelength increases linearly with column thickness and is quantitatively described using an elastohydrodynamic model and the suspension thermodynamic equation of state.

  17. Taylor dispersion of colloidal particles in narrow channels

    NASA Astrophysics Data System (ADS)

    Sané, Jimaan; Padding, Johan T.; Louis, Ard A.

    2015-09-01

    We use a mesoscopic particle-based simulation technique to study the classic convection-diffusion problem of Taylor dispersion for colloidal discs in confined flow. When the disc diameter becomes non-negligible compared to the diameter of the pipe, there are important corrections to the original Taylor picture. For example, the colloids can flow more rapidly than the underlying fluid, and their Taylor dispersion coefficient is decreased. For narrow pipes, there are also further hydrodynamic wall effects. The long-time tails in the velocity autocorrelation functions are altered by the Poiseuille flow.

  18. Slip and flow of hard-sphere colloidal glasses.

    PubMed

    Ballesta, P; Besseling, R; Isa, L; Petekidis, G; Poon, W C K

    2008-12-19

    We study the flow of concentrated hard-sphere colloidal suspensions along smooth, nonstick walls using cone-plate rheometry and simultaneous confocal microscopy. In the glass regime, the global flow shows a transition from Herschel-Bulkley behavior at large shear rate to a characteristic Bingham slip response at small rates, absent for ergodic colloidal fluids. Imaging reveals both the "solid" microstructure during full slip and the local nature of the "slip to shear" transition. Both the local and global flow are described by a phenomenological model, and the associated Bingham slip parameters exhibit characteristic scaling with size and concentration of the hard spheres.

  19. Computational Fluid Dynamics Simulation Study of Active Power Control in Wind Plants

    SciTech Connect

    Fleming, Paul; Aho, Jake; Gebraad, Pieter; Pao, Lucy; Zhang, Yingchen

    2016-08-01

    This paper presents an analysis performed on a wind plant's ability to provide active power control services using a high-fidelity computational fluid dynamics-based wind plant simulator. This approach allows examination of the impact on wind turbine wake interactions within a wind plant on performance of the wind plant controller. The paper investigates several control methods for improving performance in waked conditions. One method uses wind plant wake controls, an active field of research in which wind turbine control systems are coordinated to account for their wakes, to improve the overall performance. Results demonstrate the challenge of providing active power control in waked conditions but also the potential methods for improving this performance.

  20. [Aminopeptidases activity in the amniotic fluid in women in labor with EPH-gestosis].

    PubMed

    Karmowski, A; Sobiech, K A; Malinowski, J; Nowacka, I; Pałczyński, B; Kertyńska, I

    2000-01-01

    The thesis of this work was to compare the aminopeptidases activity in the amniotic fluid obtained during the physiological labor and during the labor of pregnant with EPH-gestosis, in presence of the beta-naphtlamidic L-amino-acids (alanine, leucine, phenylalanine, tyrosine, histidine, cysteine) chromogenic substrates. It was assumed the 3-7 times increase in the aminopeptidases activity counted to the proteins from the labored with EPH-gestosis comparing to the labored in physiological labor. Among the used substrates the highest activity in both groups of labored women was measured in presence of substrates with exact amino-acids in this order: L-Ala > L-Leu > L-Phe > L-Tyr > L-His > L-Cys.

  1. Inside Out: Active learning in fluid dynamics in and out of the classroom

    NASA Astrophysics Data System (ADS)

    Kaye, Nigel; Benson, Lisa; Sill, Ben

    2014-11-01

    Active learning can be broadly defined as any activity that engages students beyond just listening. But is it worth the effort, when we can just lecture and tell students all they need to know? Learning theories posit that students remember far more of what they say and do than of what they hear and see. The benefits of active learning include increased attendance (because class is now something different and attending is more worthwhile) and deeper understanding of concepts (because students get to practice answering and generating questions). A recent meta-analysis of research on active learning has summarized evidence of real outcomes of active learning. Research is showing that students' performance on exams are higher and that they fail at lower rates in classes that involve active learning compared to traditional lecturing. Other studies have shown evidence of improved performance in follow-on classes, showing that the improved learning lasts. There are some topics and concepts that are best taught (or at least introduced) through lecturing, but even lecturing can be broken up by short activities that engage students so they learn more effectively. In this presentation, we will review the findings of the meta study and provide examples of active learning both inside and outside the classroom that demonstrate simple ways of introducing this approach in fluid dynamics classes.

  2. Cytoskeletal protein Flightless (Flii) is elevated in chronic and acute human wounds and wound fluid: neutralizing its activity in chronic but not acute wound fluid improves cellular proliferation.

    PubMed

    Ruzehaji, Nadira; Grose, Randall; Krumbiegel, Doreen; Zola, Heddy; Dasari, Pallave; Wallace, Hilary; Stacey, Michael; Fitridge, Robert; Cowin, Allison J

    2012-01-01

    Chronic non-healing wounds form a medical need which will expand as the population ages and the obesity epidemic grows. Whilst the complex mechanisms underlying wound repair are not fully understood, remodelling of the actin cytoskeleton plays a critical role. Elevated expression of the actin cytoskeletal protein Flightless I (Flii) is known to impair wound outcomes. To determine if Flii is involved in the impaired healing observed in chronic wounds, its expression in non-healing human wounds from patients with venous leg ulcers was determined and compared to its expression in acute wounds and unwounded skin. Increased expression of Flii was observed in both chronic and acute wounds with wound fluid and plasma also containing secreted Flii protein. Inflammation is a key aspect of wound repair and fluorescence-activated cell sorting (FACS) analysis revealed Flii was located in neutrophils within the blood and that it co-localised with CD16+ neutrophils in chronic wounds. The function of secreted Flii was investigated as both chronic wound fluid and Flii have previously been shown to inhibit fibroblast proliferation. To determine if the inhibitory effect of wound fluid was due in part to the presence of Flii, wound fluids were depleted of Flii using Flii-specific neutralizing antibodies (FnAb). Flii depleted chronic wound fluid no longer inhibited fibroblast proliferation, suggesting that Flii may contribute to the inhibitory effect of chronic wound fluid on fibroblast function. Application of FnAbs to chronic wounds may therefore be a novel approach used to improve the local environment of non-healing wounds and potentially improve healing outcomes.

  3. Linking Colloid Deposit Morphology and Clogging in Porous Media

    NASA Astrophysics Data System (ADS)

    Roth, E. J.; Mont-eton, M. E.; Mays, D. C.

    2012-12-01

    Innovations in the field of groundwater remediation have been hampered by delivery limitations in the porous media. For example, colloid deposits (comprising clays or silts) can cause a detrimental reduction in permeability, or clogging, which is problematic for groundwater remediation as well as granular media filtration and aquifer storage and recovery. During remediation, clogging creates preferential pathways in the media, leading to localized rather than spatially extensive contaminant treatment. Consequentially, remediation efforts become more expensive, less effective, and take a very long time. This presentation describes ongoing research investigating the link between colloid deposit morphology and clogging in porous media. As described by Darcy's Law, the velocity of fluid flow through porous media is proportional to permeability, which depends, in part, on porosity. However, changes in permeability are not in accord with changes in porosity as predicted by the Kozeny-Carman equation. It is hypothesized that unmeasured aspects of colloid deposit morphology could be the cause of this anomaly. Colloidal phenomena have important and dynamic effects on the permeability of natural porous media, and several lines of evidence suggest a correlation between clogging in porous media and the fractal dimension of colloid deposits. Here, a custom-built static light scattering apparatus is used to measure the fractal dimension of colloid deposits in refractive index matched porous media within a flow column. The media in our flow column is Nafion, which becomes essentially invisible when saturated by a solution of isopropanol and water. Polystyrene microspheres are then added to the influent through the column as a surrogate for natural colloids. Light from a laser is passed through the column, scattering from the deposited colloids, but not from the index matched Nafion. The resulting intensity of scattered light is measured as a function of scattering angle, and then

  4. Quantitation of fibroblast activation protein (FAP)-specific protease activity in mouse, baboon and human fluids and organs.

    PubMed

    Keane, Fiona M; Yao, Tsun-Wen; Seelk, Stefanie; Gall, Margaret G; Chowdhury, Sumaiya; Poplawski, Sarah E; Lai, Jack H; Li, Youhua; Wu, Wengen; Farrell, Penny; Vieira de Ribeiro, Ana Julia; Osborne, Brenna; Yu, Denise M T; Seth, Devanshi; Rahman, Khairunnessa; Haber, Paul; Topaloglu, A Kemal; Wang, Chuanmin; Thomson, Sally; Hennessy, Annemarie; Prins, John; Twigg, Stephen M; McLennan, Susan V; McCaughan, Geoffrey W; Bachovchin, William W; Gorrell, Mark D

    2013-01-01

    The protease fibroblast activation protein (FAP) is a specific marker of activated mesenchymal cells in tumour stroma and fibrotic liver. A specific, reliable FAP enzyme assay has been lacking. FAP's unique and restricted cleavage of the post proline bond was exploited to generate a new specific substrate to quantify FAP enzyme activity. This sensitive assay detected no FAP activity in any tissue or fluid of FAP gene knockout mice, thus confirming assay specificity. Circulating FAP activity was ∼20- and 1.3-fold less in baboon than in mouse and human plasma, respectively. Serum and plasma contained comparable FAP activity. In mice, the highest levels of FAP activity were in uterus, pancreas, submaxillary gland and skin, whereas the lowest levels were in brain, prostate, leukocytes and testis. Baboon organs high in FAP activity included skin, epididymis, bladder, colon, adipose tissue, nerve and tongue. FAP activity was greatly elevated in tumours and associated lymph nodes and in fungal-infected skin of unhealthy baboons. FAP activity was 14- to 18-fold greater in cirrhotic than in non-diseased human liver, and circulating FAP activity was almost doubled in alcoholic cirrhosis. Parallel DPP4 measurements concorded with the literature, except for the novel finding of high DPP4 activity in bile. The new FAP enzyme assay is the first to be thoroughly characterised and shows that FAP activity is measurable in most organs and at high levels in some. This new assay is a robust tool for specific quantitation of FAP enzyme activity in both preclinical and clinical samples, particularly liver fibrosis.

  5. Drying of thin colloidal films

    NASA Astrophysics Data System (ADS)

    Routh, Alexander F.

    2013-04-01

    When thin films of colloidal fluids are dried, a range of transitions are observed and the final film profile is found to depend on the processes that occur during the drying step. This article describes the drying process, initially concentrating on the various transitions. Particles are seen to initially consolidate at the edge of a drying droplet, the so-called coffee-ring effect. Flow is seen to be from the centre of the drop towards the edge and a front of close-packed particles passes horizontally across the film. Just behind the particle front the now solid film often displays cracks and finally the film is observed to de-wet. These various transitions are explained, with particular reference to the capillary pressure which forms in the solidified region of the film. The reasons for cracking in thin films is explored as well as various methods to minimize its effect. Methods to obtain stratified coatings through a single application are considered for a one-dimensional drying problem and this is then extended to two-dimensional films. Different evaporative models are described, including the physical reason for enhanced evaporation at the edge of droplets. The various scenarios when evaporation is found to be uniform across a drying film are then explained. Finally different experimental techniques for examining the drying step are mentioned and the article ends with suggested areas that warrant further study.

  6. From Concept-to-Flight: An Active Active Fluid Loop Based Thermal Control System for Mars Science Laboratory Rover

    NASA Technical Reports Server (NTRS)

    Birur, Gajanana C.; Bhandari, Pradeep; Bame, David; Karlmann, Paul; Mastropietro, A. J.; Liu, Yuanming; Miller, Jennifer; Pauken, Michael; Lyra, Jacqueline

    2012-01-01

    The Mars Science Laboratory (MSL) rover, Curiosity, which was launched on November 26, 2011, incorporates a novel active thermal control system to keep the sensitive electronics and science instruments at safe operating and survival temperatures. While the diurnal temperature variations on the Mars surface range from -120 C to +30 C, the sensitive equipment are kept within -40 C to +50 C. The active thermal control system is based on a single-phase mechanically pumped fluid loop (MPFL) system which removes or recovers excess waste heat and manages it to maintain the sensitive equipment inside the rover at safe temperatures. This paper will describe the entire process of developing this active thermal control system for the MSL rover from concept to flight implementation. The development of the rover thermal control system during its architecture, design, fabrication, integration, testing, and launch is described.

  7. Inhibition of fatty acid oxidation activates transforming growth factor-beta in cerebrospinal fluid and decreases spontaneous motor activity.

    PubMed

    Fujikawa, Teppei; Fujita, Ryo; Iwaki, Yoko; Matsumura, Shigenobu; Fushiki, Tohru; Inoue, Kazuo

    2010-10-05

    We have previously reported that transforming growth factor (TGF)-beta in the cerebrospinal fluid (CSF) is involved in the mechanism underlying the regulation of spontaneous motor activity (SMA) by the central nervous system after exercise. However, it remained unclear what physiological condition triggers the activation of TGF-beta. We hypothesized that the shortage of energy derived from fatty acid (FA) oxidation observed in the early phase of exercise activated TGF-beta in the CSF. To test this hypothesis, we investigated whether mercaptoacetate (MA), an inhibitor of FA oxidation, could induce an activation of TGF-beta in the CSF and a decrease in SMA. Intraperitoneal (i.p.) administration of MA activated TGF-beta in CSF in rats and depressed SMA; 2-deoxyglucose, an inhibitor of carbohydrate oxidation, on the other hand, depressed SMA but failed to activate CSF TGF-beta. Intracisternal administration of anti-TGF-beta antibody abolished the depressive effect of MA on SMA. We also found that the depression of SMA and the activation of TGF-beta in the CSF by i.p. MA administration were eliminated by vagotomy. Our data suggest that TGF-beta in the CSF is activated by the inhibition of FA oxidation via the vagus nerve and that this subsequently induces depression of SMA.

  8. First hydroacoustic evidence of marine, active fluid vents in the Naples Bay continental shelf (Southern Italy)

    NASA Astrophysics Data System (ADS)

    Passaro, Salvatore; Genovese, Simona; Sacchi, Marco; Barra, Marco; Rumolo, Paola; Tamburrino, Stella; Mazzola, Salvatore; Basilone, Gualtiero; Placenti, Francesco; Aronica, Salvatore; Bonanno, Angelo

    2014-09-01

    We present the first results of a multidisciplinary research aimed at the detection and mapping of Active Fluid Vents (AFVs) at the seafloor of the Naples Bay, Italy. This segment of the Campania continental margin is characterised by severe Quaternary extension and intense volcanism at Ischia and Procida islands, the Campi Flegrei and Somma-Vesuvius volcanic complexes. High resolution hydroacoustic profilers were used to identify and localize fluid emission from the seafloor. ROV direct observation showed that each emission centre is generally composed by the coalescence of several emitting points. CTD probes showed that there are no significant gradients in temperature profiles. The results of this study include the detection and mapping of 54 fluid emission points all located in the - 71/- 158 m depth range, and spatially distributed into four main clusters. Three of the described clusters are located along the margin of a complex, toe-shaped seafloor morphology southwest of the Somma-Vesuvius, representing the shallow expression of partly buried, coalesced depositional features (namely, two flank collapses and one pyroclastic flow) associated with the Late Pleistocene activity of the volcano. The fourth AFV cluster was detected at the morphological - high, located about 8 km south of Naples (Banco della Montagna), represented by a field of volcaniclastic diapirs composed of massive pumiceous deposits originated from the Campi Flegrei intruding rising through the latest Quaternary-Holocene marine deposits. Our study suggests that the occurrence of AFV in this area could be genetically linked to the interaction between volcanic related seafloor morphologies and the main, NE striking faults present in the area, i.e. the Magnaghi-Sebeto line and the Vesuvian fault.

  9. Influence of electromagnetic fields on the enzyme activity of rheumatoid synovial fluid cells in vitro.

    PubMed

    Mohamed-Ali, H; Kolkenbrock, H; Ulbrich, N; Sörensen, H; Kramer, K D; Merker, H J

    1994-04-01

    Since positive clinical effects have been observed in the treatment of rheumatoid arthritis with electromagnetic fields of weak strength and low frequency range (magnetic field strength: 70 microT; frequency: 1.36-14.44 Hz), an attempt was made to analyse the effects of these electromagnetic fields on enzyme activity in monolayer cultures of rheumatoid synovial fluid cells after single irradiation of the cultures for 24 hours. We only investigated the matrix metalloproteinases (collagenase, gelatinase, proteinase 24.11 and aminopeptidases). It was found that electromagnetic fields of such a weak strength and low frequency range do not generally have a uniform effect on the activity of the different proteinases in vitro. While aminopeptidases do not show any great changes in activity, the peptidases hydrolysing N(2,4)-dinitrophenyl-peptide exhibit a distinct increase in activity in the late phase in culture medium without fetal calf serum. In the presence of fetal calf serum this effect is not observed and enzyme activity is diminished. Our experiments do not show whether such a phase-bound increase in the activity of proteinases in vitro is only one finding in a much broader range of effects of electromagnetic fields, or whether it is a specific effect of weak pulsed magnetic fields of 285 +/- 33 nT on enzyme activity after single irradiation. This question requires further elucidation.

  10. Orbital fluid shear stress promotes osteoblast metabolism, proliferation and alkaline phosphates activity in vitro.

    PubMed

    Aisha, M D; Nor-Ashikin, M N K; Sharaniza, A B R; Nawawi, H; Froemming, G R A

    2015-09-10

    Prolonged disuse of the musculoskeletal system is associated with reduced mechanical loading and lack of anabolic stimulus. As a form of mechanical signal, the multidirectional orbital fluid shear stress transmits anabolic signal to bone forming cells in promoting cell differentiation, metabolism and proliferation. Signals are channeled through the cytoskeleton framework, directly modifying gene and protein expression. For that reason, we aimed to study the organization of Normal Human Osteoblast (NHOst) cytoskeleton with regards to orbital fluid shear (OFS) stress. Of special interest were the consequences of cytoskeletal reorganization on NHOst metabolism, proliferation, and osteogenic functional markers. Cells stimulated at 250 RPM in a shaking incubator resulted in the rearrangement of actin and tubulin fibers after 72 h. Orbital shear stress increased NHOst mitochondrial metabolism and proliferation, simultaneously preventing apoptosis. The ratio of RANKL/OPG was reduced, suggesting that orbital shear stress has the potential to inhibit osteoclastogenesis and osteoclast activity. Increase in ALP activity and OCN protein production suggests that stimulation retained osteoblast function. Shear stress possibly generated through actin seemed to hold an anabolic response as osteoblast metabolism and functional markers were enhanced. We hypothesize that by applying orbital shear stress with suitable magnitude and duration as a non-drug anabolic treatment can help improve bone regeneration in prolonged disuse cases.

  11. Gravity monitoring of Tatun Volcanic Group activities and inference for underground fluid circulations

    NASA Astrophysics Data System (ADS)

    Mouyen, Maxime; Chao, Benjamin Fong; Hwang, Cheinway; Hsieh, Wen-Chi

    2016-12-01

    The Tatun Volcano Group (TVG), located on the northern coast of Taiwan adjacent to the city of Taipei, experiences active hydrothermalism but has no historical record of volcanic eruption. Yet recent studies suggest that TVG is dormant-active rather than extinct. To monitor mass transfers and to gain further understanding of this volcanic area, gravity variations have been recorded continuously since 2012 using a superconducting gravimeter, and once every few months since 2005 using absolute gravimeters. We analyze the continuous gravity time series and propose a model that best explains the gravity variations due to local groundwater redistribution. By correcting these variations, we identify gravity changes as large as 35 μGal that occurred concomitantly to fluid pressure-induced earthquakes and changes in the gas composition at Dayoukeng, one of TVG's fumaroles, over 2005-2007. We examine several fluid movements that can match the gravity observations, yet too few additional constraints exist to favor any of them. In particular, no significant ground displacements are observed when these gravity variations occurred. On the other hand, the model of gravity changes due to local groundwater redistribution can be routinely computed and removed from the ongoing time gravity measurements in order to quickly identify any unusual mass transfer occurring beneath TVG.

  12. Predominant bacteria in an activated sludge reactor for the degradation of cutting fluids

    SciTech Connect

    Baker, C.A.; Claus, G.W.; Taylor, P.A.

    1983-01-01

    For the first time, an activated sludge reactor, established for the degradation of cutting fluids, was examined for predominant bacteria. In addition, both total and viable numbers of bacteria in the reactor were determined so that the percentage of each predominant type in the total reactor population could be determined. Three samples were studied, and a total of 15 genera were detected. In each sample, the genus Pseudomonas and the genus Microcyclus were present in high numbers. Three other genera, Acinetobacter, Alcaligenes, and Corynebacterium, were also found in every sample but in lower numbers. In one sample, numerous appendage bacteria were present, and one of these, the genus Seliberia, was the most predominant organism in that sample. However, in the other two samples no appendage bacteria were detected. Six genera were found in this reactor which have not been previously reported in either cutting fluids in use or in other activated sludge systems. These genera were Aeromonas, Hyphomonas, Listeria, Microcyclus, Moraxella, and Spirosoma. None of the predominant bacterial belonged to groups of strict pathogens. 22 references, 6 figures, 3 tables.

  13. Immune activation in amniotic fluid from Zika virus-associated microcephaly.

    PubMed

    Ornelas, Alice M M; Pezzuto, Paula; Silveira, Paola P; Melo, Fabiana O; Ferreira, Thales A; Oliveira-Szejnfeld, Patricia S; Leal, Jeime I; Amorim, Melania M R; Hamilton, Stuart; Rawlinson, William D; Cardoso, Cynthia C; Nixon, Douglas F; Tanuri, Amilcar; Melo, Adriana S; Aguiar, Renato S

    2017-01-01

    Recent advances in the understanding of neuropathogenesis associated with Zika virus (ZIKV) infection has led to descriptions of neonatal microcephaly cases. However, none of these reports have evaluated the humoral response during ZIKV infection. We report here polyfunctional immune activation associated with increased interferon-gamma-inducible protein 10, interleukin (IL)-6, IL-8, vascular endothelial growth factor (VEGF), monocyte chemoattractive protein 1 (MCP-1), and granulocyte colony-stimulating factor (G-CSF) levels in the amniotic fluid of ZIKV-positive pregnant women with neonatal microcephaly. These cytokines have been associated not only with neuronal damage, but also with differentiation and proliferation of neural progenitor cells. Our results suggested that the immune activation caused by ZIKV infection in the uterine environment could also interfere with fetal development. ANN NEUROL 2017;81:152-156.

  14. Embryo as an active granular fluid: stress-coordinated cellular constriction chains

    NASA Astrophysics Data System (ADS)

    Holcomb, Michael; Gao, Guo-Jie; Thomas, Jeffrey; Blawzdziewicz, Jerzy

    2016-11-01

    Mechanical stress plays an intricate role in gene expression in individual cells and sculpting of developing tissues. Motivated by our observation of the cellular constriction chains (CCCs) during the initial phase of ventral furrow formation in the Drosophila melanogaster embryo, we propose an active granular fluid (AGF) model that provides valuable insights into cellular coordination in the apical constriction process. In our model, cells are treated as circular particles connected by a predefined force network, and they undergo a random constriction process in which the particle constriction probability P is a function of the stress exerted on the particle by its neighbors. We find that when P favors tensile stress, constricted particles tend to form chain-like structures. In contrast, constricted particles tend to form compact clusters when P favors compression. A remarkable similarity of constricted-particle chains and CCCs observed in vivo provides indirect evidence that tensile-stress feedback coordinates the apical constriction activity.

  15. New topic of supercritical fluids: Local activity coefficients of supercritical solvent and cosolvent around solute

    NASA Astrophysics Data System (ADS)

    Hou, Minqiang; Zhang, Xiaogang; Han, Buxing; Song, Jiyuan; Liu, Gang; Zhang, Zhaofu; Zhang, Jianling

    2008-03-01

    The study of inhomogeneity in supercritical fluids (SCFs) is of great importance. In this work, we propose the concept of local activity coefficients in supercritical (SC) solutions, which link thermodynamics and inhomogeneity in SC systems. The local activity coefficients of CO2+acetonitrile+phenol blue and CO2+aceticacid+phenol blue systems are investigated at 308.15K in critical region and outside critical region. To do this, the local compositions of CO2+acetonitrile and CO2+acetic acid mixed solvents around phenol blue are first estimated using UV-visible spectroscopy. Then it is considered that there exist bulk phase and local phase around phenol blue in the systems. The activity coefficients of CO2 and the cosolvents (acetonitrile or acetic acid) in bulk phase are calculated using Peng-Robinson equation of state. The local activity coefficients of CO2 and the cosolvents are then calculated on the basis of thermodynamic principles. It is demonstrated that in the critical region the local activity coefficients differ from bulk activity coefficients significantly and are sensitive to pressure. This can explain many unusual phenomena in SC systems in critical region thermodynamically.

  16. New topic of supercritical fluids: local activity coefficients of supercritical solvent and cosolvent around solute.

    PubMed

    Hou, Minqiang; Zhang, Xiaogang; Han, Buxing; Song, Jiyuan; Liu, Gang; Zhang, Zhaofu; Zhang, Jianling

    2008-03-14

    The study of inhomogeneity in supercritical fluids (SCFs) is of great importance. In this work, we propose the concept of local activity coefficients in supercritical (SC) solutions, which link thermodynamics and inhomogeneity in SC systems. The local activity coefficients of CO(2)+acetonitrile+phenol blue and CO(2)+acetic acid+phenol blue systems are investigated at 308.15 K in critical region and outside critical region. To do this, the local compositions of CO(2)+acetonitrile and CO(2)+acetic acid mixed solvents around phenol blue are first estimated using UV-visible spectroscopy. Then it is considered that there exist bulk phase and local phase around phenol blue in the systems. The activity coefficients of CO(2) and the cosolvents (acetonitrile or acetic acid) in bulk phase are calculated using Peng-Robinson equation of state. The local activity coefficients of CO(2) and the cosolvents are then calculated on the basis of thermodynamic principles. It is demonstrated that in the critical region the local activity coefficients differ from bulk activity coefficients significantly and are sensitive to pressure. This can explain many unusual phenomena in SC systems in critical region thermodynamically.

  17. Effect of angular momentum conservation on hydrodynamic simulations of colloids.

    PubMed

    Yang, Mingcheng; Theers, Mario; Hu, Jinglei; Gompper, Gerhard; Winkler, Roland G; Ripoll, Marisol

    2015-07-01

    In contrast to most real fluids, angular momentum is not a locally conserved quantity in some mesoscopic simulation methods. Here we quantify the importance of this conservation in the flow fields associated with different colloidal systems. The flow field is analytically calculated with and without angular momentum conservation for the multiparticle collision dynamics (MPC) method, and simulations are performed to verify the predictions. The flow field generated around a colloidal particle moving under an external force with slip boundary conditions depends on the conservation of angular momentum, and the amplitude of the friction force is substantially affected. Interestingly, no dependence on the angular momentum conservation is found for the flow fields generated around colloids under the influence of phoretic forces. Moreover, circular Couette flow between a no-slip and a slip cylinder is investigated, which allows us to validate one of the two existing expressions for the MPC stress tensor.

  18. Functionalized graphene sheet colloids for enhanced fuel/propellant combustion.

    PubMed

    Sabourin, Justin L; Dabbs, Daniel M; Yetter, Richard A; Dryer, Frederick L; Aksay, Ilhan A

    2009-12-22

    We have compared the combustion of the monopropellant nitromethane with that of nitromethane containing colloidal particles of functionalized graphene sheets or metal hydroxides. The linear steady-state burning rates of the monopropellant and colloidal suspensions were determined at room temperature, under a range of pressures (3.35-14.4 MPa) using argon as a pressurizing fluid. The ignition temperatures were lowered and burning rates increased for the colloidal suspensions compared to those of the liquid monopropellant alone, with the graphene sheet suspension having significantly greater burning rates (i.e., greater than 175%). The relative change in burning rate from neat nitromethane increased with increasing concentrations of fuel additives and decreased with increasing pressure until at high pressures no enhancement was found.

  19. Triclinic nematic colloidal crystals from competing elastic and electrostatic interactions.

    PubMed

    Mundoor, Haridas; Senyuk, Bohdan; Smalyukh, Ivan I

    2016-04-01

    The self-assembly of nanoparticles can enable the generation of composites with predesigned properties, but reproducing the structural diversity of atomic and molecular crystals remains a challenge. We combined anisotropic elastic and weakly screened electrostatic interactions to guide both orientational and triclinic positional self-ordering of inorganic nanocrystals in a nematic fluid host. The lattice periodicity of these low-symmetry colloidal crystals is more than an order of magnitude larger than the nanoparticle size. The orientations of the nanocrystals, as well as the crystallographic axes of the ensuing triclinic colloidal crystals, are coupled to the uniform alignment direction of the nematic host, which can be readily controlled on large scales. We examine colloidal pair and many-body interactions and show how triclinic crystals with orientational ordering of the semiconductor nanorods emerge from competing long-range elastic and electrostatic forces.

  20. Straining soft colloids in aqueous nematic liquid crystals

    NASA Astrophysics Data System (ADS)

    Spagnolie, Saverio; Mushenheim, Peter; Pendery, Joel; Weibel, Douglas; Abbott, Nicholas

    2016-11-01

    Liquid crystals (LCs) are anisotropic, viscoelastic fluids that can be used to direct colloids into organized assemblies with unusual optical, mechanical, and electrical properties. In past studies, the colloids have been sufficiently rigid that their individual shapes and properties have not been strongly coupled to elastic stresses imposed by the LCs. We will discuss how soft colloids (micrometer-sized shells) behave in LCs. We reveal a sharing of strain between the LC and shells, resulting in formation of spindle-like shells and other complex shapes. These results hint at previously unidentified designs of reconfigurable soft materials with applications in sensing and biology. Related effects relevant to biolocomotion will also be touched upon. Wisconsin MRSEC Grant DMR-1121288.

  1. The feedback between active tectonics, fluid flow and mineralization in an Andean geotermal reservoir

    NASA Astrophysics Data System (ADS)

    Reich, M.; Arancibia, G.; Perez, P.; Sanchez, P.; Cembrano, J. M.; Stimac, J. A.; Lohmar, S.

    2012-12-01

    In the Andean Cordillera of Central-Southern Chile, geothermal resources occur in close spatial relationship with active volcanism. The nature of the relationship between tectonics and volcanism in this region is the result of interaction between the crustal structures of the basement and the ongoing regional stress field, which is primarily controlled by the oblique convergence of the Nazca and South America Plates. Between 39° and 46°S, the volcanic and geothermal activity is controlled by the NNE-trending, 1,000 km long Liquiñe-Ofqui Fault Zone (LOFZ), an intra-arc dextral strike-slip fault system. Although there is consensus that volcanism (and hence geothermal activity) in southern Chile is largely controlled by the regional-scale tectonic stress field and architecture of the volcanic arc, there is limited scientific information about the role of local kinematic conditions on fluid flow and mineralization during the development and evolution of geothermal reservoirs. In this report, we present the preliminary results of an undergoing structural, mineralogical and geochemical study of the Tolhuaca geothermal system in southern Chile. The Tolhuaca geothermal reservoir formed as a liquid-dominated hydrothermal system, where shallow upflow resulted in near-boiling temperatures in a roughly horizontal liquid reservoir at 100-200 m depth (Melosh et al., 2010, 2012). In an early stage of evolution, hydrothermal brecciation and phase-separation (boiling) episodes penetrated at least 950 m depth into the deeper reservoir, and boiling was followed by steam-heated water invasion that cooled the reservoir. In a later stage, the preliminary conceptual model involves boiling and reheating of the reservoir, forming a system with deep hot brines that is connected to the shallow steam zone by an upflow conduit that is characterized by high-temperature mineralogy. The structural analysis of veins, fault-veins and faults of the Tol-1 drillcore (~1080 m depth) provide insights

  2. Active Model H: Scalar Active Matter in a Momentum-Conserving Fluid

    NASA Astrophysics Data System (ADS)

    Tiribocchi, Adriano; Wittkowski, Raphael; Marenduzzo, Davide; Cates, Michael E.

    2015-10-01

    We present a continuum theory of self-propelled particles, without alignment interactions, in a momentum-conserving solvent. To address phase separation, we introduce a dimensionless scalar concentration field ϕ with advective-diffusive dynamics. Activity creates a contribution Σi j=-κ ^ [(∂iϕ )(∂jϕ )-(∇ϕ )2δi j/d ] to the deviatoric stress, where κ ^ is odd under time reversal and d is the number of spatial dimensions; this causes an effective interfacial tension contribution that is negative for contractile swimmers. We predict that domain growth then ceases at a length scale where diffusive coarsening is balanced by active stretching of interfaces, and confirm this numerically. Thus, there is a subtle interplay of activity and hydrodynamics, even without alignment interactions.

  3. Speciation of organic carbon, Cu and Mn in the River Marne (France): the role of colloids

    NASA Astrophysics Data System (ADS)

    Jaïry, A.; Garban, B.; Blanchard, M.; Chesterikoff, A.

    1999-02-01

    The distribution of organic carbon (OC) and of some metals (Cu, Mn) amongst the particulate (>0·2 m), colloidal (10 kDa-0·2 m) and the truly dissolved (<10 kDa) fractions of the River Marne was investigated during the phytoplankton spring bloom. A tangential ultrafiltration (UF) device was utilized to separate the colloidal fraction. On average, 22% of the OC, 31% of the Cu and 53% of the Mn, usually assigned to the so-called dissolved fraction, were found in the colloidal fraction. The colloidal fraction exhibited a behaviour different from that of the particulate and truly dissolved fractions. Autochthonous production led to enrichment in the colloidal and particulate OC pools: up to 47% of the total dissolved OC was in the colloidal fraction. An increase in the colloidal metal fraction, concomitant with a fall in the truly dissolved fraction, coincided with peaks in phytoplankton during the bloom. These phenomena might be related either to an increase in pH associated with photosynthetic activity, resulting in the precipitation of truly dissolved forms into the colloidal fraction, or to scavenging of the truly dissolved metals by the algal species of colloidal size.The interaction between the colloidal and the truly dissolved phases was very important. The partition coefficients of the Cu and Mn between the colloidal and truly dissolved fractions were higher than between the particulate and the truly dissolved fractions. This pattern is consistent with a greater specific surface area of colloids than macroparticles. Consequently, the adsorption and complexation capacities are enhanced in the colloidal fraction of the particulate matter.The extraction of hydrophobic complexes with Cu using C18 Sep-Pak columns, showed that the Cu occurring in colloidal, total dissolved or truly dissolved forms was significantly complexed by the organic matter. The truly dissolved fraction might be complexed up to 100% during a phytoplankton bloom.

  4. Hydrothermal fluids circulation and travertine deposition in an active tectonic setting: Insights from the Kamara geothermal area (western Anatolia, Turkey)

    NASA Astrophysics Data System (ADS)

    Brogi, Andrea; Alçiçek, M. Cihat; Yalçıner, Cahit Çağlar; Capezzuoli, Enrico; Liotta, Domenico; Meccheri, Marco; Rimondi, Valentina; Ruggieri, Giovanni; Gandin, Anna; Boschi, Chiara; Büyüksaraç, Aydin; Alçiçek, Hülya; Bülbül, Ali; Baykara, Mehmet Oruç; Shen, Chuan-Chou

    2016-06-01

    Coexistence of thermal springs, travertine deposits and tectonic activity is a recurring feature for most geothermal areas. Although such a certainty, their relationships are debated mainly addressing on the role of the tectonic activity in triggering and controlling fluids flow and travertine deposition. In this paper, we present the results of an integrated study carried out in a geothermal area located in western Anatolia (Turkey), nearby the well-known Pamukkale area (Denizli Basin). Our study focused on the relationships among hydrothermal fluids circulation, travertine deposition and tectonic activity, with particular emphasis on the role of faults in controlling fluids upwelling, thermal springs location and deposition of travertine masses. New field mapping and structural/kinematics analyses allowed us to recognize two main faults systems (NW- and NE-trending), framed in the Neogene-Quaternary extensional tectonic evolution of western Anatolia. A geo-radar (GPR) prospection was also provided in a key-area, permitting us to reconstruct a buried fault zone and its relationships with the development of a fissure-ridge travertine deposit (Kamara fissure-ridge). The integration among structural and geophysical studies, fluids inclusion, geochemical, isotopic data and 230 Th/238 U radiometric age determination on travertine deposits, depict the characteristics of the geothermal fluids and their pathway, up to the surface. Hydrological and seismological data have been also taken in account to investigate the relation between local seismicity and fluid upwelling. As a main conclusion we found strict relationships among tectonic activity, earthquakes occurrence, and variation of the physical/chemical features of the hydrothermal fluids, presently exploited at depth, or flowing out in thermal springs. In the same way, we underline the tectonic role in controlling the travertine deposition, making travertine (mainly banded travertine) a useful proxy to reconstruct the

  5. Resistance exercise-induced fluid shifts: change in active muscle size and plasma volume

    NASA Technical Reports Server (NTRS)

    Ploutz-Snyder, L. L.; Convertino, V. A.; Dudley, G. A.

    1995-01-01

    The purpose of this study was to test the hypothesis that the reduction in plasma volume (PV) induced by resistance exercise reflects fluid loss to the extravascular space and subsequently selective increase in cross-sectional area (CSA) of active but not inactive skeletal muscle. We compared changes in active and inactive muscle CSA and PV after barbell squat exercise. Magnetic resonance imaging (MRI) was used to quantify muscle involvement in exercise and to determine CSA of muscle groups or individual muscles [vasti (VS), adductor (Add), hamstring (Ham), and rectus femoris (RF)]. Muscle involvement in exercise was determined using exercise-induced contrast shift in spin-spin relaxation time (T2)-weighted MR images immediately postexercise. Alterations in muscle size were based on the mean CSA of individual slices. Hematocrit, hemoglobin, and Evans blue dye were used to estimate changes in PV. Muscle CSA and PV data were obtained preexercise and immediately postexercise and 15 and 45 min thereafter. A hierarchy of muscle involvement in exercise was found such that VS > Add > Ham > RF, with the Ham and RF showing essentially no involvement. CSA of the VS and Add muscle groups were increased 10 and 5%, respectively, immediately after exercise in each thigh with no changes in Ham and RF CSA. PV was decreased 22% immediately following exercise. The absolute loss of PV was correlated (r2 = 0.75) with absolute increase in muscle CSA immediately postexercise, supporting the notion that increased muscle size after resistance exercise reflects primarily fluid movement from the vascular space into active but not inactive muscle.

  6. Succinate dehydrogenase activity in cultured human skin fibroblasts and amniotic fluid cells. A methodological study.

    PubMed

    Hansen, T L; Andersen, H

    1983-01-01

    Through a methodological evaluation, reliable histochemical and biochemical methods for succinate dehydrogenase activity in cultured human skin fibroblasts and amniotic fluid cells were developed. The histochemical method includes a cleaning of the cultured cells in 1 mM malonate in 0.9% NaCl, air-drying and fixation in acetone (5 min at -20 degrees C), coating of cells with CoQ10 (0.2 mg/ml in ether/acetone) and incubation for 1 h at 37 degrees C in 50 mM succinate and 0.5 mg/ml Nitro BT in 200 mM phosphate buffer, pH 7.6 PMS as an intermediate electron carrier was found inferior to exogenous CoQ10. Both types of cells exhibit equal activity. In the biochemical method homogenizing was performed in 50 mM Tris-HCl buffer, pH 7.5, and 200 mM sucrose. The standard incubation was 2.0 mM INT and 10 mM succinate in 10 mM Tris-HCl buffer, pH 7.5 for 1 h at 37 degrees C. The apparent Km values for INT and succinate were estimated to 0.39 mM and 0.13 mM, respectively, while I0.5 for malonate was 0.46 mM. Activity in amniotic fluid cells was 18.1 pkat/mg protein and in human skin fibroblasts 20.3 pkat/mg protein. Specificity of the methods was tested by use of a Chinese hamster fibroblast strain B9 known to be succinate dehydrogenase deficient in addition to various control experiments. Congruent results were obtained with the two methods.

  7. Evaporation induced ordering in polymer-colloid suspensions

    NASA Astrophysics Data System (ADS)

    Senses, Erkan; Black, Matthew; Cunningham, Thomas; Akcora, Pinar

    2013-03-01

    When evaporated from aqueous solutions, colloidal particles tend to deposit non-uniformly on hydrophilic substrates due to capillary flow from the center of droplet to the pinned contact line. The so called ``coffee-ring'' deposition has been extensively studied in polymer solutions and colloidal suspensions; however, the behavior of the mixtures of polymer-colloid suspensions under evaporation remains unexplored. The competition between the homogenous fluid phase and the depletion induced phase separation offers rich phase behavior to these three component systems over a wide range of size ratios and concentrations. In this work, we present the formation of long-range, ordered colloid-rich and polymer-rich phases with a well-defined periodicity from homogenous mixture of colloids and polymer via solvent evaporation. The kinetics of the phase separation, studied by video microscopy and Fourier transform analysis of the images obtained at different times, suggests that the early growth of the phases can be quantitatively described by spinodal decomposition kinetics. The effect of particle and polymer concentrations, polymer and particle size ratios, interparticle bridging and substrate on microscopic phase separation will be discussed.

  8. Treatment of malignant pericardial effusion with 32P-colloid

    PubMed Central

    Dempke, W; Firusian, N

    1999-01-01

    Malignant pericardial effusion is usually treated only when signs of cardiac tamponade develop. Several methods of treatment have been reported with an overall response rate of approximately 75%. Since our initial study using intrapericardial 32P-colloid instillation as a treatment modality for pericardial effusion demonstrated a significant higher response rate, this study was conducted to further evaluate the efficacy of intrapericardial 32P-colloid in terms of response rates and duration of remissions. Intrapericardial instillation of 185–370 MBq (5–10 mCi) 32P-colloid in 36 patients with malignant pericardial effusion resulted in a complete remission rate of 94.5% (34 patients) whereas two patients did not respond to treatment due to a foudroyant formation of pericardial fluid. The median duration time was 8 months. No side-effects were observed. These results suggest that intrapericardial instillation of 32P-colloid is a simple, reliable and safe treatment strategy for patients with malignant pericardial effusions. Therefore, since further evidence is provided that 32P-colloid is significantly more effective than external radiation or non-radioactive sclerosing agents, this treatment modality should be considered for the management of malignant pericardial effusion. © 1999 Cancer Research Campaign PMID:10471044

  9. Chromogranin A immunoreactivity in human cerebrospinal fluid: properties, relationship to noradrenergic neuronal activity, and variation in neurologic disease.

    PubMed

    O'Connor, D T; Cervenka, J H; Stone, R A; Parmer, R J; Franco-Bourland, R E; Madrazo, I; Langlais, P J

    1993-10-01

    Although measurement of chromogranin A in the bloodstream is of value in sympathoadrenal investigations, little is systematically known about chromogranin A in cerebrospinal fluid, despite substantial knowledge about its occurrence and distribution in brain. We therefore applied a homologous human chromogranin A radioimmunoassay to cerebrospinal fluid, in order to evaluate the properties and stability of cerebrospinal fluid chomogranin A, as well as its relationship to central noradrenergic neuronal activity, to peripheral (plasma) chromogranin A, and to disease states such as hypertension, renal failure and Parkinsonism. Authentic, physically stable chromogranin A immunoreactivity was found in cerebrospinal fluid (at 37-146 ng/ml; mean, 87.0 +/- 6.0 ng/ml in healthy subjects), and several lines of evidence (including 3.39 +/- 0.27-fold higher chromogranin A in cerebrospinal fluid than in plasma) indicated that it originated from a local central nervous system source, rather than the periphery. Cerebrospinal fluid chromogranin A values were not influenced by administration of effective antihypertensive doses of clonidine or propranolol, and were not related to the cerebrospinal fluid concentrations of norepinephrine, methoxyhydroxyphenylglycol, or dopamine-beta-hydroxylase; thus, cerebrospinal fluid chromogranin A was not closely linked to biochemical or pharmacologic indices of central noradrenergic neuronal activity. Cerebrospinal fluid chromogranin A was not changed (P > 0.1) in essential hypertension (84.2 +/- 14.0 ng/ml) or renal failure (72.2 +/- 13.4 ng/ml), despite a marked (7.1-fold; P < 0.001) increase in plasma chromogranin A in renal failure, and a modest (1.5-fold; P = 0.004) increase in plasma chromogranin A in essential hypertension.(ABSTRACT TRUNCATED AT 250 WORDS)

  10. Collective behavior of chemotactic colloids: clusters, asters and oscillations

    NASA Astrophysics Data System (ADS)

    Saha, Suropriya; Golestanian, Ramin; Ramaswamy, Sriram

    2014-03-01

    Catalytic colloidal swimmers are a particularly promising example of systems that emulate properties of living matter, such as motility, gradient-sensing, signaling and replication. Here we present a comprehensive theoretical description of dynamics of an individual patterned catalytic colloid, leading controllably to chemotactic or anti-chemotactic behavior. We find that both the positional and the orientational degrees of freedom of the active colloids can exhibit condensation, signaling formation of clusters and asters. The kinetics of catalysis introduces a natural control parameter for the range of the interaction mediated by the diffusing chemical species. For various regimes in parameter space in the long-ranged limit our system displays precise analogs to gravitational collapse, plasma oscillations and electrostatic screening. We present prescriptions for how to tune the surface properties of the colloids during fabrication to achieve each type of behavior.

  11. Sonochromic effect in WO{sup 3} colloidal suspensions

    SciTech Connect

    Kamat, P.V.; Vinodgopal, K.

    1996-11-13

    In recent years there has been a burst of activities in investigating sonolytic reactions. The usefulness of this technique in synthesizing colloidal semiconductors and metals and dissolution of MnO{sup 2} colloids has also been demonstrated. We have now employed semiconductor colloids to investigate the radical reactions in sonolytic processes. In this study we present our preliminary results from the reaction of WO{sup 3} colloids with sonolytically generated H atoms. Sodium tungstate, oxalic acid, and Acid Orange 7 were obtained from Aldrich. Acid Orange 7 was purified by column chromatography. All other chemicals were analytical reagents of highest available purity. The analysis experiments were carried out with a 640 kHz sonolysis setup of Ultrasonic Energy Systems (Panama City, FL). 24 refs., 4 figs.

  12. Comparison of human immunodeficiency virus type 1-specific inhibitory activities in saliva and other human mucosal fluids.

    PubMed

    Kazmi, Shamim H; Naglik, Julian R; Sweet, Simon P; Evans, Robert W; O'Shea, Siobhan; Banatvala, Jangu E; Challacombe, Stephen J

    2006-10-01

    Several human mucosal fluids are known to possess an innate ability to inhibit human immunodeficiency virus type 1 (HIV-1) infection and replication in vitro. This study compared the HIV-1 inhibitory activities of several mucosal fluids, whole, submandibular/sublingual (sm/sl), and parotid saliva, breast milk, colostrum, seminal plasma, and cervicovaginal secretions, from HIV-1-seronegative donors by using a 3-day microtiter infection assay. A wide range of HIV-1 inhibitory activity was exhibited in all mucosal fluids tested, with some donors exhibiting high levels of activity while others showed significantly lower levels. Colostrum, whole milk, and whole saliva possessed the highest levels of anti-HIV-1 activity, seminal fluid, cervicovaginal secretions, and sm/sl exhibited moderate levels, and parotid saliva consistently demonstrated the lowest levels of HIV-1 inhibition. Fast protein liquid chromatography gel filtration studies revealed the presence of at least three distinct peaks of inhibitory activity against HIV-1 in saliva and breast milk. Incubation of unfractionated and fractionated whole saliva with antibodies raised against human lactoferrin (hLf), secretory leukocyte protease inhibitor (SLPI), and, to a lesser extent, MG2 (high-molecular-weight mucinous glycoprotein) reduced the HIV-1 inhibitory activity significantly. The results suggest that hLf and SLPI are two key components responsible for HIV-1 inhibitory activity in different mucosal secretions. The variation in HIV inhibitory activity between the fluids and between individuals suggests that there may be major differences in susceptibility to HIV infection depending both on the individual and on the mucosal fluid involved.

  13. Associations between PON1 enzyme activities in human ovarian follicular fluid and serum specimens

    PubMed Central

    Kim, Keewan; Fujimoto, Victor Y.; Browne, Richard W.

    2017-01-01

    The importance of high-density lipoprotein (HDL) particle components to reproduction is increasingly recognized, including the constituent paraoxonase 1 (PON1). However, the reliability characteristics of PON1 enzymes in ovarian follicular fluid (FF) as biomarkers for clinical and epidemiologic studies have not been described. Therefore, we characterized PON1 enzymes in FF and serum and assessed the impact of the PON1 Q192R polymorphism on associations between enzyme activities in two compartments. We also evaluated associations between HDL particle size and enzyme activities. We collected FF and serum from 171 women undergoing in vitro fertilization. PON1 activities were measured as paraoxonase and arylesterase activities, and HDL particle size was determined by 1H NMR spectrometry. Reliability indices for PON1 activities were characterized and we evaluated HDL particle sizes as predictors of PON1 enzyme activities. We found that PON1 enzyme activities were correlated between compartments, but higher in serum than in FF. For FF, the index of individuality (II) was low and the coefficient of variation (CV%) was high for paraoxonase activity overall (0.12 and 11.51%, respectively). However, IIs increased (0.33–1.30) and CV%s decreased (5.58%-8.52%) when stratified by PON1 Q192R phenotype. The intraclass correlation coefficient (ICC) for FF paraoxonase activity was high overall (0.89) but decreased when stratified by PON1 Q192R phenotype (0.43–0.75). We found similar, although more modest, patterns for FF arylesterase activity. For enzyme activities in serum, ICCs were close to 1.00 across all phenotypes. Additionally, different HDL particle sizes predicted PON1 enzyme activities according to PON1 Q192R phenotype. Overall, stratification by PON1 Q192R phenotype improved the reliability characteristics of FF PON1 enzymes as biomarkers for use in clinical investigations but diminished usefulness for epidemiologic studies. Thus, we recommend stratification by PON1 Q

  14. A fully resolved fluid-structure-muscle-activation model for esophageal transport

    NASA Astrophysics Data System (ADS)

    Kou, Wenjun; Bhalla, Amneet P. S.; Griffith, Boyce E.; Johnson, Mark; Patankar, Neelesh A.

    2013-11-01

    Esophageal transport is a mechanical and physiological process that transfers the ingested food bolus from the pharynx to the stomach through a multi-layered esophageal tube. The process involves interactions between the bolus, esophageal wall composed of mucosal, circular muscle (CM) and longitudinal muscle (LM) layers, and neurally coordinated muscle activation including CM contraction and LM shortening. In this work, we present a 3D fully-resolved model of esophageal transport based on the immersed boundary method. The model describes the bolus as a Newtonian fluid, the esophageal wall as a multi-layered elastic tube represented by springs and beams, and the muscle activation as a traveling wave of sequential actuation/relaxation of muscle fibers, represented by springs with dynamic rest lengths. Results on intraluminal pressure profile and bolus shape will be shown, which are qualitatively consistent with experimental observations. Effects of activating CM contraction only, LM shortening only or both, for the bolus transport, are studied. A comparison among them can help to identify the role of each type of muscle activation. The support of grant R01 DK56033 and R01 DK079902 from NIH is gratefully acknowledged.

  15. A Randomized Controlled Design Investigating the Effects of Classroom-Based Physical Activity on Children's Fluid Intelligence and Achievement

    ERIC Educational Resources Information Center

    Fedewa, Alicia L.; Ahn, Soyeon; Erwin, Heather; Davis, Matthew C.

    2015-01-01

    Existing literature shows promising effects of physical activity on children's cognitive outcomes. This study assessed via a randomized, controlled design whether additional curricular physical activity during the school day resulted in gains for children's fluid intelligence and standardized achievement outcomes. Participants were children…

  16. Advances in the microrheology of complex fluids

    NASA Astrophysics Data System (ADS)

    Waigh, Thomas Andrew

    2016-07-01

    New developments in the microrheology of complex fluids are considered. Firstly the requirements for a simple modern particle tracking microrheology experiment are introduced, the error analysis methods associated with it and the mathematical techniques required to calculate the linear viscoelasticity. Progress in microrheology instrumentation is then described with respect to detectors, light sources, colloidal probes, magnetic tweezers, optical tweezers, diffusing wave spectroscopy, optical coherence tomography, fluorescence correlation spectroscopy, elastic- and quasi-elastic scattering techniques, 3D tracking, single molecule methods, modern microscopy methods and microfluidics. New theoretical techniques are also reviewed such as Bayesian analysis, oversampling, inversion techniques, alternative statistical tools for tracks (angular correlations, first passage probabilities, the kurtosis, motor protein step segmentation etc), issues in micro/macro rheological agreement and two particle methodologies. Applications where microrheology has begun to make some impact are also considered including semi-flexible polymers, gels, microorganism biofilms, intracellular methods, high frequency viscoelasticity, comb polymers, active motile fluids, blood clots, colloids, granular materials, polymers, liquid crystals and foods. Two large emergent areas of microrheology, non-linear microrheology and surface microrheology are also discussed.

  17. Advances in the microrheology of complex fluids.

    PubMed

    Waigh, Thomas Andrew

    2016-07-01

    New developments in the microrheology of complex fluids are considered. Firstly the requirements for a simple modern particle tracking microrheology experiment are introduced, the error analysis methods associated with it and the mathematical techniques required to calculate the linear viscoelasticity. Progress in microrheology instrumentation is then described with respect to detectors, light sources, colloidal probes, magnetic tweezers, optical tweezers, diffusing wave spectroscopy, optical coherence tomography, fluorescence correlation spectroscopy, elastic- and quasi-elastic scattering techniques, 3D tracking, single molecule methods, modern microscopy methods and microfluidics. New theoretical techniques are also reviewed such as Bayesian analysis, oversampling, inversion techniques, alternative statistical tools for tracks (angular correlations, first passage probabilities, the kurtosis, motor protein step segmentation etc), issues in micro/macro rheological agreement and two particle methodologies. Applications where microrheology has begun to make some impact are also considered including semi-flexible polymers, gels, microorganism biofilms, intracellular methods, high frequency viscoelasticity, comb polymers, active motile fluids, blood clots, colloids, granular materials, polymers, liquid crystals and foods. Two large emergent areas of microrheology, non-linear microrheology and surface microrheology are also discussed.

  18. Improving sensitivity in chiral supercritical fluid chromatography for analysis of active pharmaceutical ingredients.

    PubMed

    Helmy, Roy; Biba, Mirlinda; Zang, Jia; Mao, Bing; Fogelman, Kimber; Vlachos, Vaso; Hosek, Paul; Welch, Christopher J

    2007-11-01

    Despite its status as the preferred method for routine enantiopurity analysis in pharmaceutical research, supercritical fluid chromatography (SFC) has historically been unsuited for the accurate and precise measurements required for release testing of active pharmaceutical ingredients (APIs) under current good manufacturing processes (cGMPs). Insufficient signal to noise, as compared to HPLC, has heretofore been the major limitation of the chiral SFC approach. We herein describe an investigation into the fundamental limitations and sources of noise in the SFC approach, identifying thermal, electronic, and mechanical sources of noise within the flow cell as key parameters contributing to reduced sensitivity. A variety of instrument modifications are explored, ultimately leading to the development of a new and improved flow cell and other instrument modifications that allow suitable sensitivity and accuracy to carry out GMP release testing for enantiopurity analysis using SFC.

  19. Bubble mass center and fluid feedback force fluctuations activated by constant lateral impulse with variable thrust

    NASA Technical Reports Server (NTRS)

    Hung, R. J.; Long, Y. T.

    1995-01-01

    Sloshing dynamics within a partially filled rotating dewar of superfluid helium 2 are investigated in response to constant lateral impulse with variable thrust. The study, including how the rotating bubble of superfluid helium 2 reacts to the constant impulse with variable time period of thrust action in microgravity, how amplitudes of bubble mass center fluctuates with growth and decay of disturbances, and how fluid feedback forces fluctuates in activating on the rotating dewar through the dynamics of sloshing waves are investigated. The numerical computation of sloshing dynamics is based on the non-inertial frame spacecraft bound coordinate with lateral impulses actuating on the rotating dewar in both inertial and non-inertial frames of thrust. Results of the simulations are illustrated.

  20. Alkaline phosphatase activity in gingival crevicular fluid during human orthodontic tooth movement.

    PubMed

    Perinetti, Giuseppe; Paolantonio, Michele; D'Attilio, Michele; D'Archivio, Domenico; Tripodi, Domenico; Femminella, Beatrice; Festa, Felice; Spoto, Giuseppe

    2002-11-01

    Bone remodeling that occurs during orthodontic tooth movement is a biologic process involving an acute inflammatory response in periodontal tissues. A sequence characterized by periods of activation, resorption, reversal, and formation has been recently described as occurring in both tension and compression tooth sites during orthodontic tooth movement. We used a longitudinal design to investigate alkaline phosphatase (ALP) activity in gingival crevicular fluid (GCF) to assess whether it can serve as a diagnostic aid in orthodontics. Sixteen patients (mean age, 15.5 years) participated in the study. The maxillary first molars under treatment served as the test teeth (TT) in each patient; in particular, 1 first molar was to be retracted and hence was considered the distalized molar (DM), whereas the contralateral molar (CM) was included in the fixed orthodontic appliance but was not subjected to the distal forces. The DM antagonist first molar (AM), free from any orthodontic appliance, was used as the baseline control. The GCF around the experimental teeth was harvested from mesial and distal tooth sites immediately before appliance activation, 1 hour after, and weekly over the following 4 weeks. The clinical gingival condition was evaluated at the baseline and at the end of the experimental term. ALP activity was determined spectrophotometrically at 30 degrees C, and the results were expressed as total ALP activity (mUnits/sample). GCF ALP activity was significantly elevated in the DMs and the CMs as compared with the AMs at 1, 2, 3, and 4 weeks; conversely, in the AMs, GCF ALP activity remained at baseline levels throughout the experiment. Moreover, the enzyme activity in the DMs was significantly greater than in the CMs. In the DMs, a significantly greater ALP activity was observed in sites of tension compared with sites of compression. This difference was not seen with the CMs, in which the enzyme activity increased to the same extent in tension and compression

  1. Orbital fluid shear stress promotes osteoblast metabolism, proliferation and alkaline phosphates activity in vitro

    SciTech Connect

    Aisha, M.D.; Nor-Ashikin, M.N.K.; Sharaniza, A.B.R.; Nawawi, H.; Froemming, G.R.A.

    2015-09-10

    Prolonged disuse of the musculoskeletal system is associated with reduced mechanical loading and lack of anabolic stimulus. As a form of mechanical signal, the multidirectional orbital fluid shear stress transmits anabolic signal to bone forming cells in promoting cell differentiation, metabolism and proliferation. Signals are channeled through the cytoskeleton framework, directly modifying gene and protein expression. For that reason, we aimed to study the organization of Normal Human Osteoblast (NHOst) cytoskeleton with regards to orbital fluid shear (OFS) stress. Of special interest were the consequences of cytoskeletal reorganization on NHOst metabolism, proliferation, and osteogenic functional markers. Cells stimulated at 250 RPM in a shaking incubator resulted in the rearrangement of actin and tubulin fibers after 72 h. Orbital shear stress increased NHOst mitochondrial metabolism and proliferation, simultaneously preventing apoptosis. The ratio of RANKL/OPG was reduced, suggesting that orbital shear stress has the potential to inhibit osteoclastogenesis and osteoclast activity. Increase in ALP activity and OCN protein production suggests that stimulation retained osteoblast function. Shear stress possibly generated through actin seemed to hold an anabolic response as osteoblast metabolism and functional markers were enhanced. We hypothesize that by applying orbital shear stress with suitable magnitude and duration as a non-drug anabolic treatment can help improve bone regeneration in prolonged disuse cases. - Highlights: • OFS stress transmits anabolic signals to osteoblasts. • Actin and tubulin fibers are rearranged under OFS stress. • OFS stress increases mitochondrial metabolism and proliferation. • Reduced RANKL/OPG ratio in response to OFS inhibits osteoclastogenesis. • OFS stress prevents apoptosis and stimulates ALP and OCN.

  2. Determination of a suitable parameter field for the active fluid jet polishing process

    NASA Astrophysics Data System (ADS)

    Maurer, Roland; Biskup, Heiko; Trum, Christian; Rascher, Rolf; Wünsche, Christine

    2013-09-01

    In 2012 a well-known company in the field of high precision optics assigned the University of Applied Sciences Deggendorf to determine a suitable parameter field for the active fluid jet polishing (AFJP) process in order to reach a surface accuracy of at least lambda / 5. The active fluid jet polishing is a relatively new and an affordable sub-aperture polishing process. For a fast and precise identification of the parameter field a considered design of experiment is necessary. The available control variables were the rotational speed of the nozzle, the distance between the test object and the jet, the feed rate, the material of the pin inside the nozzle and the material of the test object itself. In order to reach a significant data density on the one hand and to minimize the number of test runs on the other hand a meander shaped tool path was chosen. At each blank nine paths had been driven whereby at each path another parameter combination was picked. Thus with only one test object nine parameter settings may be evaluated. For the automatized analysis of the tracks a software tool was developed. The software evaluates ten sections which orthogonally intersect the nine tracks on the test-lens. The significant measurement parameters per section are the width and the height of each path as well as the surface roughness within the polished tracks. With the aid of these parameters and further statistical evaluations a suitable parameter field for the goal to find a constant and predictable removal spot was determined. Furthermore up to now over 60 test runs have been successfully finished with nine parameter combinations in each case. As a consequence a test evaluation by hand would be very time-consuming and the software facilitates it dramatically.

  3. Motion, relaxation dynamics, and diffusion processes in two-dimensional colloidal crystals confined between walls.

    PubMed

    Wilms, Dorothea; Virnau, Peter; Snook, Ian K; Binder, Kurt

    2012-11-01

    The dynamical behavior of single-component two-dimensional colloidal crystals confined in a slit geometry is studied by Langevin dynamics simulation of a simple model. The colloids are modeled as pointlike particles, interacting with the repulsive part of the Lennard-Jones potential, and the fluid molecules in the colloidal suspension are not explicitly considered. Considering a crystalline strip of triangular lattice structure with n=30 rows, the (one-dimensional) walls confining the strip are chosen as two rigidly fixed crystalline rows at each side, commensurate with the lattice structure and, thus, stabilizing long-range order. The case when the spacing between the walls is incommensurate with the ideal triangular lattice is also studied, where (due to a transition in the number of rows, n → n-1) the confined crystal is incommensurate with the confining boundaries, and a soliton staircase forms along the walls. It is shown that mean-square displacements (MSDs) of particles as a function of time show an overshoot and then saturate at a horizontal plateau in the commensurate case, the value of the plateau being largest in the center of the strip. Conversely, when solitons are present, MSDs are largest in the rows containing the solitons, and all MSDs do not settle down at well-defined plateaus in the direction parallel to the boundaries, due to the lack of positional long-range order in ideal two-dimensional crystals. The MSDs of the solitons (which can be treated like quasiparticles at very low temperature) have also been studied and their dynamics are found to be about an order of magnitude slower than that of the colloidal particles themselves. Finally, transport of individual colloidal particles by diffusion processes is studied: both standard vacancy-interstitial pair formation and cooperative ring rotation processes are identified. These processes require thermal activation, with activation energies of the order of 10T(m) (T(m) being the melting

  4. Fluid Therapy in Lung Disease.

    PubMed

    Rozanski, Elizabeth; Lynch, Alex

    2017-03-01

    Fluid therapy is the cornerstone of supportive care in veterinary medicine. In dogs and cats with preexisting confirmed or suspected pulmonary disease, concerns may exist that the fluid therapy may impair gas exchange, either through increases in hydrostatic pressures or extravasation. Colloidal therapy is more likely to magnify lung injury compared with isotonic crystalloids. Radiographic evidence of fluid overload is a late-stage finding, whereas point-of-care ultrasound may provide earlier information that can also be assessed periodically at the patient side. Cases should be evaluated individually, but generally a conservative fluid therapy plan is preferred with close monitoring of its tolerance.

  5. Circulating extracellular proteasome in the cerebrospinal fluid: a study on concentration and proteolytic activity.

    PubMed

    Mueller, Oliver; Anlasik, Timur; Wiedemann, Jonas; Thomassen, Jan; Wohlschlaeger, Jeremias; Hagel, Vincent; Keyvani, Kathy; Schwieger, Isabel; Dahlmann, Burkhardt; Sure, Ulrich; Sixt, Stephan Urs

    2012-03-01

    Alterations of the intracellular ubiquitin-proteasome pathway are found in neurodegenerative and inflammatory disorders of the central nervous system, as well as in its malignancies. Inhibitory substrates of the proteasomes represent promising approaches to control autoimmune inflammations and induction of apoptosis in cancer cells. Extracellular circulating proteasomes are positively correlated to outcome prognosis in hematogenic neoplasias and the outcome in critically ill patients. Previously, we reported raised levels of proteolytic active 20S proteasomes in the extracellular alveolar space in patients with acute respiratory distress syndrome (ARDS). For the cerebrospinal fluid, we assumed that extracellular circulating proteasomes with enzymatic activity can be found, too. Cerebrospinal fluid (CSF) samples of twenty-six patients (14 females, 12 males), who underwent diagnostic spinal myelography, were analyzed for leukocyte cell count, total protein content, lactate and interleukine-6 (Il-6) concentrations. CSF samples were analyzed for concentration and enzymatic activity of extracellular 20S proteasomes (fluorescenic substrate cleavage; femtokatal). Blood samples were analyzed with respect to concentration of extracellular circulating proteasomes. Choroidal plexus was harvested at autopsies and examined with immunoelectron microscopy (EM) for identification of possible transportation mechanisms. Statistical analysis was performed using SPSS (18.0.3). In all patients, extracellular proteasome was found in the CSF. The mean concentration was 24.6 ng/ml. Enzymatic activity of the 20S subunits of proteasomes was positively identified by the fluorescenic subtrate cleavage at a mean of 8.5 fkat/ml. Concentrations of extracellular proteasomes in the CSF, total protein content and Il-6 were uncorrelated. Immunoelectron microscopy revealed merging vesicles of proteasomes with the outer cell membrane suggestive of an exozytic transport mechanism. For the first time

  6. Magnetorheology of hybrid colloids obtained by spin-coating and classical rheometry

    NASA Astrophysics Data System (ADS)

    Aslam, Raheema; Shahrivar, Keshvad; de Vicente, Juan; González-Viñas, Wenceslao

    2016-07-01

    Hybrid colloids composed of micron-sized ferromagnetic (carbonyl iron) and diamagnetic (silica) particles suspended in cyclohexanone, behave as, non-Newtonian, magnetorheological fluids. We measure and compare the magnetic field-dependent viscosity of hybrid diluted colloids using spin-coating and conventional magnetorheometry. We extend a previously developed model for simple colloids to this kind of hybrid colloids. As in the previous model, the viscosity of the colloidal suspension under applied fields can be derived from the surface coverage of the dry spin-coated deposits for each type of particles, and from the viscosity of the colloid at zero field. Also, our results allow us to obtain the evaporation rate of the solvent as a function of the rotation speed. Finally, we also measure the viscosity of the same suspension with a torsional parallel plate magnetorheometer under uniaxial DC magnetic fields aligned in the velocity gradient direction of a steady shearing flow. The experimental results under different conditions and the effect of each component on the magnetorheological properties of the resulting colloid are discussed. Standard spin-coating technique can be used both to characterize smart materials—complex fluids as well as to fabricate films with arbitrary solvents by tuning their viscosity by means of external fields.

  7. Comparison of Antibodies with Amylase Activity from Cerebrospinal Fluid and Serum of Patients with Multiple Sclerosis

    PubMed Central

    Doronin, Vasilii B.; Parkhomenko, Taisiya A.; Castellazzi, Massimiliano; Cesnik, Edward; Buneva, Valentina N.; Granieri, Enrico; Nevinsky, Georgy A.

    2016-01-01

    We have recently shown that IgGs from serum and cerebrospinal fluid (CSF) of MS patients are active in hydrolysis of DNA and myelin basic protein. According to literature data, anti-DNA and anti-MBP abzymes may promote important neuropathologic mechanisms in this chronic inflammatory disorder and in MS pathogenesis development. At the same time, the involvement of antibodies with amylase activity in the pathogenesis of any autoimmune disease has not yet been identified. Electrophoretically and immunologically homogeneous IgGs were obtained by a sequential affinity chromatography of the CSF proteins on protein G-Sepharose and FPLC gel filtration. We are able to present the first unpredictable evidence showing that IgGs from CSF possess amylase activity and efficiently hydrolyze maltoheptaose; their average specific Ab activity is ~30-fold higher than that of antibodies from sera of the same MS patients. Specific average RA (SAA) for IgGs from healthy volunteers was approximately ~1000 lower than that for MS patients. In addition, it was shown that a relative SAA of total proteins of CSF (including Abs) ~15-fold lower than that for purified IgGs, while the relative SAA of the total sera protein is higher than that of sera IgGs by a factor of 1033. This result speaks in favor of the fact that amylolytic activity of CSF proteins is mainly caused by the activity of amylase abzymes. One cannot exclude, that amylase abzymes of CSF can play a, as yet unknown, role in the pathogenesis of MS. Some possible reasons of these findings are discussed. PMID:27196086

  8. Nonchromatographic affinity precipitation method for the purification of bivalently active pharmaceutical antibodies from biological fluids.

    PubMed

    Handlogten, Michael W; Stefanick, Jared F; Alves, Nathan J; Bilgicer, Basar

    2013-05-21

    This Article describes an affinity-based precipitation method for the rapid and nonchromatographic purification of bivalently active monoclonal antibodies by combining the selectivity of affinity chromatography with the simplicity of salt-induced precipitation. This procedure involves (i) precipitation of proteins heavier than immunoglobulins with ammonium sulfate; (ii) formation and selective precipitation of cyclic antibody complexes created by binding to trivalent haptens specific for the antibody; and (iii) membrane filtration of the solubilized antibody pellet to remove the trivalent hapten from the purified antibody. We applied this technique to the purification of two pharmaceutical antibodies, trastuzumab and rituximab, by synthesizing trivalent haptens specific for each antibody. Using this method, we were able to purify both antibodies from typical contaminants including CHO cell conditioned media, ascites fluid, DNA, and other antibodies with yields >85% and with >95% purity. The purified antibodies displayed native binding levels to cell lines expressing the target proteins demonstrating that the affinity-based precipitation method did not adversely affect the antibodies. The selectivity of the affinity-based precipitation method for bivalently active antibodies was established by purifying trastuzumab from a solution containing both active and chemically denatured trastuzumab. Prior to purification, the solutions displayed 20-76% reduction in binding activity, and after purification, native binding activity was restored, indicating that the purified product contained only bivalently active antibody. Taken together, the affinity-based precipitation method provides a rapid and straightforward process for the purification of antibodies with the potential to improve product quality while decreasing the purification costs at both the lab and the industrial scale.

  9. Chemokines in the cerebrospinal fluid of patients with active and stable relapsing-remitting multiple sclerosis.

    PubMed

    Moreira, M A; Souza, A L S; Lana-Peixoto, M A; Teixeira, M M; Teixeira, A L

    2006-04-01

    Multiple sclerosis (MS) is a chronic inflammatory demyelinating disease of the human central nervous system. Although its etiology is unknown, the accumulation and activation of mononuclear cells in the central nervous system are crucial to its pathogenesis. Chemokines have been proposed to play a major role in the recruitment and activation of leukocytes in inflammatory sites. They are divided into subfamilies on the basis of the location of conserved cysteine residues. We determined the levels of some CC and CXC chemokines in the cerebrospinal fluid (CSF) of 23 relapsing-remitting MS patients under interferon-ss-1a therapy and 16 control subjects using ELISA. MS patients were categorized as having active or stable disease. CXCL10 was significantly increased in the CSF of active MS patients (mean +/- SEM, 369.5 +/- 69.3 pg/mL) when compared with controls (178.5 +/- 29.1 pg/mL, P < 0.05). CSF levels of CCL2 were significantly lower in active MS (144.7 +/- 14.4 pg/mL) than in controls (237.1 +/- 16.4 pg/mL, P < 0.01). There was no difference in the concentration of CCL2 and CXCL10 between patients with stable MS and controls. CCL5 was not detectable in the CSF of most patients or controls. The qualitative and quantitative differences of chemokines in CSF during relapses of MS suggest that they may be useful as a marker of disease activity and of the mechanisms involved in the pathogenesis of the disease.

  10. Crystalloids and colloids in critical patient resuscitation.

    PubMed

    Garnacho-Montero, J; Fernández-Mondéjar, E; Ferrer-Roca, R; Herrera-Gutiérrez, M E; Lorente, J A; Ruiz-Santana, S; Artigas, A

    2015-01-01

    Fluid resuscitation is essential for the survival of critically ill patients in shock, regardless of the origin of shock. A number of crystalloids and colloids (synthetic and natural) are currently available, and there is strong controversy regarding which type of fluid should be administered and the potential adverse effects associated with the use of these products, especially the development of renal failure requiring renal replacement therapy. Recently, several clinical trials and metaanalyses have suggested the use of hydroxyethyl starch (130/0.4) to be associated with an increased risk of death and kidney failure, and data have been obtained showing clinical benefit with the use of crystalloids that contain a lesser concentration of sodium and chlorine than normal saline. This new information has increased uncertainty among clinicians regarding which type of fluid should be used. We therefore have conducted a review of the literature with a view to developing practical recommendations on the use of fluids in the resuscitation phase in critically ill adults.

  11. Investigation of particles size effects in Dissipative Particle Dynamics (DPD) modelling of colloidal suspensions

    NASA Astrophysics Data System (ADS)

    Mai-Duy, N.; Phan-Thien, N.; Khoo, B. C.

    2015-04-01

    In the Dissipative Particle Dynamics (DPD) simulation of suspension, the fluid (solvent) and colloidal particles are replaced by a set of DPD particles and therefore their relative sizes (as measured by their exclusion zones) can affect the maximal packing fraction of the colloidal particles. In this study, we investigate roles of the conservative, dissipative and random forces in this relative size ratio (colloidal/solvent). We propose a mechanism of adjusting the DPD parameters to properly model the solvent phase (the solvent here is supposed to have the same isothermal compressibility to that of water).

  12. Fluid Shear Stress Regulates the Invasive Potential of Glioma Cells via Modulation of Migratory Activity and Matrix Metalloproteinase Expression

    PubMed Central

    Qazi, Henry; Shi, Zhong-Dong; Tarbell, John M.

    2011-01-01

    Background Glioma cells are exposed to elevated interstitial fluid flow during the onset of angiogenesis, at the tumor periphery while invading normal parenchyma, within white matter tracts, and during vascular normalization therapy. Glioma cell lines that have been exposed to fluid flow forces in vivo have much lower invasive potentials than in vitro cell motility assays without flow would indicate. Methodology/Principal Findings A 3D Modified Boyden chamber (Darcy flow through collagen/cell suspension) model was designed to mimic the fluid dynamic microenvironment to study the effects of fluid shear stress on the migratory activity of glioma cells. Novel methods for gel compaction and isolation of chemotactic migration from flow stimulation were utilized for three glioma cell lines: U87, CNS-1, and U251. All physiologic levels of fluid shear stress suppressed the migratory activity of U87 and CNS-1 cell lines. U251 motility remained unaltered within the 3D interstitial flow model. Matrix Metalloproteinase (MMP) inhibition experiments and assays demonstrated that the glioma cells depended on MMP activity to invade, and suppression in motility correlated with downregulation of MMP-1 and MMP-2 levels. This was confirmed by RT-PCR and with the aid of MMP-1 and MMP-2 shRNA constructs. Conclusions/Significance Fluid shear stress in the tumor microenvironment may explain reduced glioma invasion through modulation of cell motility and MMP levels. The flow-induced migration trends were consistent with reported invasive potentials of implanted gliomas. The models developed for this study imply that flow-modulated motility involves mechanotransduction of fluid shear stress affecting MMP activation and expression. These models should be useful for the continued study of interstitial flow effects on processes that affect tumor progression. PMID:21637818

  13. Collective motion in populations of colloidal robots

    NASA Astrophysics Data System (ADS)

    Bartolo, Denis; Bricard, Antoine; Caussin, Jean-Baptiste; Dauchot, Olivier; Desreumaux, Nicolas

    2014-03-01

    Could the behavior of bacteria swarms, fish schools, and bird flocks be understood within a unified framework? Can one ignore the very details of the interaction mechanisms at the individual level to elucidate how strikingly similar collective motion emerges at the group level in this broad range of motile systems? These seemingly provocative questions have triggered significant advance in the physics and the biology, communities over the last decade. In the physics language these systems, made of motile individuals, can all be though as different realizations of ``active matter.'' In this talk, I will show how to gain more insight into this vivid field using self-propelled colloids as a proxy for motile organism. I will show how to motorize colloidal particles capable of sensing the orientation of their neighbors. Then, I will demonstrate that these archetypal populations display spontaneous transitions to swarming motion, and to global directed motion with very few density and orientation fluctuations.

  14. Inspection and analysis of the walls of fluid filled tubes by active electrolocation: a biomimetic approach

    NASA Astrophysics Data System (ADS)

    Gottwald, Martin; Mayekar, Kavita; Reiswich, Vladislav; Bousack, Herbert; Damalla, Deepak; Biswas, Shubham; Metzen, Michael G.; von der Emde, Gerhard

    2011-04-01

    During their nocturnal activity period, weakly electric fish employ a process called "active electrolocation" for navigation and object detection. They discharge an electric organ in their tail, which emits electrical current pulses, called electric organ discharges (EOD). Local EODs are sensed by arrays of electroreceptors in the fish's skin, which respond to modulations of the signal caused by nearby objects. Fish thus gain information about the size, shape, complex impedance and distance of objects. Inspired by these remarkable capabilities, we have designed technical sensor systems which employ active electrolocation to detect and analyse the walls of small, fluid filled pipes. Our sensor systems emit pulsed electrical signals into the conducting medium and simultaneously sense local current densities with an array of electrodes. Sensors can be designed which (i) analyse the tube wall, (ii) detect and localize material faults, (iii) identify wall inclusions or objects blocking the tube (iv) and find leakages. Here, we present first experiments and FEM simulations on the optimal sensor arrangement for different types of sensor systems and different types of tubes. In addition, different methods for sensor read-out and signal processing are compared. Our biomimetic sensor systems promise to be relatively insensitive to environmental disturbances such as heat, pressure, turbidity or muddiness. They could be used in a wide range of tubes and pipes including water pipes, hydraulic systems, and biological systems. Medical applications include catheter based sensors which inspect blood vessels, urethras and similar ducts in the human body.

  15. Semi-active engine mount design using auxiliary magneto-rheological fluid compliance chamber

    NASA Astrophysics Data System (ADS)

    Mansour, H.; Arzanpour, S.; Golnaraghi, M. F.; Parameswaran, A. M.

    2011-03-01

    Engine mounts are used in the automotive industry to isolate engine and chassis by reducing the noise and vibration imposed from one to the other. This paper describes modelling, simulation and design of a semi-active engine mount that is designed specifically to address the complicated vibration pattern of variable displacement engines (VDE). The ideal isolation for VDE requires the stiffness to be switchable upon cylinder activation/deactivation operating modes. In order to have a modular design, the same hydraulic engine mount components are maintained and a novel auxiliary magneto-rheological (MR) fluid chamber is developed and retrofitted inside the pumping chamber. The new compliance chamber is a controllable pressure regulator, which can effectively alter the dynamic performance of the mount. Switching between different modes happens by turning the electrical current to the MR chamber magnetic coil on and off. A model has been developed for the passive hydraulic mount and then it is extended to include the MR auxiliary chamber as well. A proof-of-concept prototype of the design has been fabricated which validates the mathematical model. The results demonstrate unique capability of the developed semi-active mount to be used for VDE application.

  16. A semi-active control suspension system for railway vehicles with magnetorheological fluid dampers

    NASA Astrophysics Data System (ADS)

    Wei, Xiukun; Zhu, Ming; Jia, Limin

    2016-07-01

    The high-speed train has achieved great progress in the last decades. It is one of the most important modes of transportation between cities. With the rapid development of the high-speed train, its safety issue is paid much more attention than ever before. To improve the stability of the vehicle with high speed, extra dampers (i.e. anti-hunting damper) are used in the traditional bogies with passive suspension system. However, the curving performance of the vehicle is undermined due to the extra lateral force generated by the dampers. The active suspension systems proposed in the last decades attempt to solve the vehicle steering issue. However, the active suspension systems need extra actuators driven by electrical power or hydraulic power. There are some implementation and even safety issues which are not easy to be overcome. In this paper, an innovative semi-active controlled lateral suspension system for railway vehicles is proposed. Four magnetorheological fluid dampers are fixed to the primary suspension system of each bogie. They are controlled by online controllers for enhancing the running stability on the straight track line on the one hand and further improving the curving performance by controlling the damper force on the other hand. Two control strategies are proposed in the light of the pure rolling concept. The effectiveness of the proposed strategies is demonstrated by SIMPACK and Matlab co-simulation for a full railway vehicle with two conventional bogies.

  17. Embryo as an active granular fluid: stress-coordinated cellular constriction chains

    NASA Astrophysics Data System (ADS)

    Gao, Guo-Jie Jason; Holcomb, Michael C.; Thomas, Jeffrey H.; Blawzdziewicz, Jerzy

    2016-10-01

    Mechanical stress plays an intricate role in gene expression in individual cells and sculpting of developing tissues. However, systematic methods of studying how mechanical stress and feedback help to harmonize cellular activities within a tissue have yet to be developed. Motivated by our observation of the cellular constriction chains (CCCs) during the initial phase of ventral furrow formation in the Drosophila melanogaster embryo, we propose an active granular fluid (AGF) model that provides valuable insights into cellular coordination in the apical constriction process. In our model, cells are treated as circular particles connected by a predefined force network, and they undergo a random constriction process in which the particle constriction probability P is a function of the stress exerted on the particle by its neighbors. We find that when P favors tensile stress, constricted particles tend to form chain-like structures. In contrast, constricted particles tend to form compact clusters when P favors compression. A remarkable similarity of constricted-particle chains and CCCs observed in vivo provides indirect evidence that tensile-stress feedback coordinates the apical constriction activity. Our particle-based AGF model will be useful in analyzing mechanical feedback effects in a wide variety of morphogenesis and organogenesis phenomena.

  18. Cervicovaginal fluid and semen block the microbicidal activity of hydrogen peroxide produced by vaginal lactobacilli

    PubMed Central

    2010-01-01

    Background H2O2 produced by vaginal lactobacilli is believed to protect against infection, and H2O2-producing lactobacilli inactivate pathogens in vitro in protein-free salt solution. However, cervicovaginal fluid (CVF) and semen have significant H2O2-blocking activity. Methods We measured the H2O2 concentration of CVF and the H2O2-blocking activity of CVF and semen using fluorescence and in vitro bacterial-exposure experiments. Results The mean H2O2 measured in fully aerobic CVF was 23 ± 5 μM; however, 50 μM H2O2 in salt solution showed no in vitro inactivation of HSV-2, Neisseria gonorrhoeae, Hemophilus ducreyii, or any of six BV-associated bacteria. CVF reduced 1 mM added H2O2 to an undetectable level, while semen reduced 10 mM added H2O2 to undetectable. Moreover, the addition of just 1% CVF supernatant abolished in vitro pathogen-inactivation by H2O2-producing lactobacilli. Conclusions Given the H2O2-blocking activity of CVF and semen, it is implausible that H2O2-production by vaginal lactobacilli is a significant mechanism of protection in vivo. PMID:20482854

  19. Fluid imbalance

    MedlinePlus

    ... up in the body. This is called fluid overload (volume overload). This can lead to edema (excess fluid in ... Water imbalance; Fluid imbalance - dehydration; Fluid buildup; Fluid overload; Volume overload; Loss of fluids; Edema - fluid imbalance; ...

  20. RANTES and Chemotactic Activity in Synovial Fluids From Patients With Rheumatoid Arthritis and Osteoarthritis

    PubMed Central

    Stanczyk, Joanna; Kowalski, Marek L.; Grzegorczyk, Janina; Szkudlinska, Barbara; Jarzebska, Marzanna; Marciniak, Marek; Synder, Marek

    2005-01-01

    A massive accumulation of inflammatory cells in synovial tissues is a major pathological feature of rheumatoid arthritis (RA). Neutrophiles dominate synovial fluid while rheumatoid synovium is infiltrated with mononuclear cells. Mechanisms regulating influx of particular subpopulations of leukocytes into articular cavity and synovium compartment are not completely defined. An increasing amount of data supports a crucial role of a C-C chemokine RANTES in the RA pathogenesis. Our objective is to evaluate chemotactic activity for neutrophils (NCA), lymphocytes (LCA), and monocytes (MoCA) in SFs obtained from patients with RA and osteoarthritis (OA). We also aimed to characterise the relation between chemotactic activity, RANTES, and percentage distribution of leukocytes in SF. SFs from 11 patients with RA and 6 with OA were included in the study. Modified microchamber Boyden method was employed to assess chemotactic activity. Cytological and biochemical analysis of SF was performed. RANTES was measured with ELISA. Rheumatoid SFs were rich in cells with predominance of neutrophiles while osteoarthritic fluids were lymphocytic. RA SFs were also characterised by increased lactoferrin level. Both NCA and LCA were higher in SF from patients with RA (62 ± 12 and 24 ± 6 cells/HPF, resp) as compared to patients with OA (23 ± 6; P < .05 and 6 ± 2 cells/HPF; P < 0.05). The chemoattractive effect of RA SF was more pronounced on neutrophiles than on lymphocytes. RA SF expressed high RANTES levels (145 ± 36 pg/mL), while OA SF was characterised by only trace amount of this chemokine (2 ± 1 pg/mL). We found positive correlation of RANTES with chemotactic activity for mononuclear cells (LCA+MoCA; R = 0.61; P < .05). Surprisingly, RANTES correlated also positively with neutrophiles number (R = 0.77; P < 0.001). Rheumatoid SF possesses strong chemotactic potency for leukocytes. RANTES is overexpressed in RA SF and is a potential mediator influencing intensity and composition

  1. Dilatancy in the flow and fracture of stretched colloidal suspensions.

    PubMed

    Smith, M I; Besseling, R; Cates, M E; Bertola, V

    2010-11-16

    Concentrated particulate suspensions, commonplace in the pharmaceutical, cosmetic and food industries, display intriguing rheology. In particular, the dramatic increase in viscosity with strain rate (shear thickening and jamming), which is often observed at high-volume fractions, is of practical and fundamental importance. Yet, manufacture of these products and their subsequent dispensing often involves flow geometries substantially different from that of simple shear flow experiments. In this study, we show that the elongation and breakage of a filament of a colloidal fluid under tensile loading is closely related to the jamming transition seen in its shear rheology. However, the modified flow geometry reveals important additional effects. Using a model system with nearly hard-core interactions, we provide evidence of surprisingly strong viscoelasticity in such a colloidal fluid under tension. With high-speed photography, we also directly observe dilatancy and granulation effects, which lead to fracture above a critical elongation rate.

  2. Investigation of Hydrodynamic and Depletion Interactions in Binary Colloidal Dispersions

    NASA Astrophysics Data System (ADS)

    James, Gregory K.

    Within a colloidal dispersion, the presence of negatively adsorbing material can produce a variety of effects on the dispersion properties and interactions. With increasing concentration, the negatively adsorbing material induces both depletion and structural forces on the dispersion, which can dramatically affect both colloidal stability and near-contact hydrodynamics. This project focused on expanding our understanding of the effects of such negatively adsorbing materials on both equilibrium and dynamic interactions between particles. The effects of charged, hard spheres (silica nanoparticle) on the hydrodynamic drag force a particle experiences as it approaches a flat plate were measured experimentally using colloid probe atomic force microscopy (CP-AFM). Deviation was found between the measured drag force and predictions for the drag force in a simple, Newtonian fluid. The measured drag force was always smaller than the predicted drag force as the particle approached contact with the plate. An effective viscosity, that approached the dispersing fluid viscosity at contact and the bulk viscosity at large separations, was determined for the system. This effective viscosity displayed similar characteristics to those predicted theoretically by Bhattacharya and Blawzdziewicz ( J. Chem. Phys. 2008, 128, 214704.). The effects of both anionic and cationic micelles on the depletion and structural forces in a colloidal dispersion were studied both experimentally (with CP-AFM) and theoretically. The depletion and structural forces between a microparticle and a flat plate were measured and compared with the depletion force predicted by the force-balance model of Walz and Sharma (J. Colloid Interface Sci. 1994, 168, 485-496.). Consistent with previous work, the measured depletion force for both micelles was smaller in magnitude than that predicted by the Walz and Sharma model for hard, charged spheres. It is theorized that rearrangement of the micelle surfaces charges or

  3. Clathrate colloidal crystals

    NASA Astrophysics Data System (ADS)

    Lin, Haixin; Lee, Sangmin; Sun, Lin; Spellings, Matthew; Engel, Michael; Glotzer, Sharon C.; Mirkin, Chad A.

    2017-03-01

    DNA-programmable assembly has been used to deliberately synthesize hundreds of different colloidal crystals spanning dozens of symmetries, but the complexity of the achieved structures has so far been limited to small unit cells. We assembled DNA-modified triangular bipyramids (~250-nanometer long edge, 177-nanometer short edge) into clathrate architectures. Electron microscopy images revealed that at least three different structures form as large single-domain architectures or as multidomain materials. Ordered assemblies, isostructural to clathrates, were identified with the help of molecular simulations and geometric analysis. These structures are the most sophisticated architectures made via programmable assembly, and their formation can be understood based on the shape of the nanoparticle building blocks and mode of DNA functionalization.

  4. Flow cytometric approach to human polymorphonuclear leukocyte activation induced by gingival crevicular fluid in periodontal disease.

    PubMed

    Biselli, R; Ferlini, C; Di Murro, C; Paolantonio, M; Fattorossi, A

    1995-08-01

    In gingival pockets of patients with periodontal disease, polymorphonuclear leukocytes (PMN) are in contact with a peculiar exudate, the gingival crevicular fluid (GCF). Because of the pivotal role played by PMN in periodontal disease, we evaluated the ability of GCF in modulating normal human PMN. GCF was obtained from two gingival sites with severe periodontitis (SP) and two gingival sites with only mild periodontitis (MP) in 12 patients. Purified PMN were exposed to GCF from SP and MP sites and, as a control, to sterile culture medium. GCF activity was evaluated by monitoring the modulation of membrane molecules relevant to cell function. Compared to control medium, GCF from SP and MP sites was able to induce an activation status in PMN evidenced by an increased CD11b (62 +/- 9% and 28 +/- 7%, respectively) and f-Met-Leu-Phe (56 +/- 5% and 31 +/- 7%, respectively) receptor expression, with a concomitant reduction of CD62L expression (56 +/- 8% and 23 +/- 7%, respectively). Thus, reflecting the clinical status, GCF from SP sites was significantly more efficient in affecting PMN than GCF from MP sites. Cell size modifications, evaluated as an additional indicator of PMN activation, were consistent with membrane molecule modulation. The difference in PMN-activating capacity between SP and MP was abrogated by the successful completion of an appropriate periodontal therapy that dramatically improved clinical status. This is the first direct demonstration that GCF from periodontitis has the capacity to activate normal resting PMN and that this capacity reflects the magnitude of the inflammatory process that takes place in the gingiva.

  5. Response of bacteria and meiofauna to iron oxide colloids in sediments of freshwater microcosms.

    PubMed

    Höss, Sebastian; Frank-Fahle, Béatrice; Lueders, Tillmann; Traunspurger, Walter

    2015-11-01

    The use of colloidal iron oxide (FeOx) in the bioremediation of groundwater contamination implies its increasing release into the environment and requires an assessment of its ecotoxicological risk. Therefore, microcosm experiments were carried out to investigate the impact of ferrihydrite colloids on the bacterial and meiofaunal communities of pristine freshwater sediments. The effects of ferrihydrite colloids were compared with those of ferrihydrite macroaggregates to discriminate between colloid-specific and general FeOx impacts. The influence of ferrihydrite colloids on the toxicity of sediment-bound fluoranthene was also considered. At high concentrations (496 mg Fe kg(-1) sediment dry wt), ferrihydrite colloids had a significant, but transient impact on bacterial and meiofaunal communities. Although bacterial community composition specifically responded to ferrihydrite colloids, a more general FeOx effect was observed for meiofauna. Bacterial activity responded most sensitively (already at 55 mg Fe kg(-1) dry wt) without the potential of recovery. Ferrihydrite colloids did not influence the toxicity of sediment-bound fluoranthene. Significant correlations between bacterial activity and meiofaunal abundances were indicative of trophic interactions between bacteria and meiofauna and therefore of the contribution of indirect food web effects to the observed impacts. The results suggest that the application of ferrihydrite colloids for remediation purposes in the field poses no risk for benthic communities, given that, with the exception of generic bacterial activity, any negative effects on communities were reversible.

  6. Colloid labelled with radionuclide and method

    DOEpatents

    Atcher, R.W.; Hines, J.J.

    1990-11-13

    A ferric hydroxide colloid having an alpha-emitting radionuclide essentially on the outer surfaces and a method of forming same. The method includes oxidizing a ferrous hydroxide to ferric hydroxide in the presence of a preselected radionuclide to form a colloid having the radionuclide on the outer surface thereof, and thereafter washing the colloid, and suspending the washed colloid in a suitable solution. The labelled colloid is useful in cancer therapy and for the treatment of inflamed joints. No Drawings

  7. Method of making colloid labeled with radionuclide

    DOEpatents

    Atcher, Robert W.; Hines, John J.

    1991-01-01

    A ferric hydroxide colloid having an alpha-emitting radionuclide essentially on the outer surfaces and a method of forming same. The method includes oxidizing a ferrous hydroxide to ferric hydroxide in the presence of a preselected radionuclide to form a colloid having the radionuclide on the outer surface thereof, and thereafter washing the colloid, and suspending the washed colloid in a suitable solution. The labelled colloid is useful in cancer therapy and for the treatment of inflamed joints.

  8. Colloid labelled with radionuclide and method

    DOEpatents

    Atcher, Robert W.; Hines, John J.

    1990-01-01

    A ferric hydroxide colloid having an alpha-emitting radionuclide essentially on the outer surfaces and a method of forming same. The method includes oxidizing a ferrous hydroxide to ferric hydroxide in the presence of a preselected radionuclide to form a colloid having the radionuclide on the outer surface thereof, and thereafter washing the colloid, and suspending the washed colloid in a suitable solution. The labelled colloid is useful in cancer therapy and for the treatment of inflamed joints.

  9. Factors in cerebrospinal fluid from goats that affect sleep and activity in rats*

    PubMed Central

    Fencl, V.; Koski, G.; Pappenheimer, J. R.

    1971-01-01

    1. Intraventricular infusion in the rat of 0·1 ml. cerebrospinal fluid (c.s.f.) from sleep-deprived goats increases the duration of sleep (measured by e.e.g.) and decreases locomotor activity (measured photo-electrically) for at least 6 hr subsequent to the infusion. Subarachnoid infusions are ineffective. 2. C.s.f. from control and sleep-deprived goats was fractionated by ultrafiltration through molecular sieves. The sleep-promoting Factor S is found in the low molecular weight fraction (mol. wt. < 500) of c.s.f. from sleep-deprived but not from control goats. 3. The concentration of Factor S in c.s.f. increases progressively during the first 48 hr of sleep deprivation. 4. The sleep promoting effects of Factor S cannot be duplicated by serotonin, 4-OH-butyrate, butyrolactone, GABA (γ-amino butyric acid), glutamic acid or 3′,5′-cyclic AMP when these substances are added to control fluids in concentrations up to 10 times greater than those found in normal c.s.f. 5. Intraventricular or subarchnoid infusion in the rat of 0·1 ml. proteinfree c.s.f. containing molecules in the mol. wt. range of 500-10,000 at 10-30 × normal concentration causes hyperactivity which persists for several days and nights following the infusion. The excitatory material, probably a peptide, is present in c.s.f. from both control and sleep-deprived goats. 6. The properties of Factor S suggest that it may play a role in the normal regulation of sleep and wakefulness. PMID:4327693

  10. Depletion-induced structure and dynamics in bimodal colloidal suspensions.

    SciTech Connect

    Sikorski, M.; Sandy, A. R.; Narayanan, S.

    2011-05-03

    Combined small angle x-ray scattering and x-ray photon correlation spectroscopy studies of moderately concentrated bimodal hard-sphere colloidal suspensions in the fluid phase show that depletion-induced demixing introduces spatially heterogeneous dynamics with two distinct time scales. The adhesive nature, as well as the mobility, of the large particles is determined by the level of interaction within the monomodal domains. This interaction is driven by osmotic forces, which are governed by the relative concentration of the constituents.

  11. Coffee-rings and glasses: Colloids out of equilibrium

    NASA Astrophysics Data System (ADS)

    Yunker, Peter Joseph

    observed that the size of these collective rearrangements increases. Thus, the slowing dynamics of aging appear governed by growing correlated domains of particles required for relaxation. Using the same microgel particles, the transformation of a crystal into a glass due to added disorder was investigated by adding smaller particles into a quasi-two-dimensional colloidal crystal. The crystal-glass transition bears structural signatures similar to those of the crystal-fluid transition, but also exhibits a sharp change in dynamic heterogeneity which ``turns-on'' abruptly as a function of increasing disorder. Finally, we investigated the influence of morphology and size on the vibrational properties of disordered clusters of colloidal particles. Spectral features of cluster vibrational modes are found to depend strongly on the average number of nearest neighbors but only weakly on the number of particles in each glassy cluster. The scaling of the median phonon frequency with nearest neighbor number is reminiscent of athermal simulations of the jamming transition.

  12. Active Path Selection of Fluid Microcapsules in Artificial Blood Vessel by Acoustic Radiation Force

    NASA Astrophysics Data System (ADS)

    Masuda, Kohji; Muramatsu, Yusuke; Ueda, Sawami; Nakamoto, Ryusuke; Nakayashiki, Yusuke; Ishihara, Ken

    2009-07-01

    Micrometer-sized microcapsules collapse upon exposure to ultrasound. Use of this phenomenon for a drug delivery system (DDS), not only for local delivery of medication but also for gene therapy, should be possible. However, enhancing the efficiency of medication is limited because capsules in suspension diffuse in the human body after injection, since the motion of capsules in blood flow cannot be controlled. To control the behavior of microcapsules, acoustic radiation force was introduced. We detected local changes in microcapsule density by producing acoustic radiation force in an artificial blood vessel. Furthermore, we theoretically estimated the conditions required for active path selection of capsules at a bifurcation point in the artificial blood vessel. We observed the difference in capsule density at both in the bifurcation point and in alternative paths downstream of the bifurcation point for different acoustic radiation forces. Comparing the experimental results with those obtained theoretically, the conditions for active path selection were calculated from the acoustic radiation force and fluid resistance of the capsules. The possibility of controlling capsule flow towards a specific point in a blood vessel was demonstrated.

  13. Short-term Influence of Drilling Fluid on Ciliates from Activated Sludge in Sequencing Batch Reactors.

    PubMed

    Babko, Roman; Kuzmina, Tatiana; Łagód, Grzegorz; Jaromin-Gleń, Katarzyna; Danko, Yaroslav; Pawłowska, Małgorzata; Pawłowski, Artur

    2017-01-01

    Spent drilling muds are the liquid residues of rock drilling operations. Due to a high concentration of suspended solids and potentially detrimental chemical properties, they can negatively affect microorganisms participating in wastewater treatment processes. We evaluated the addition of a potassium-polymer drilling fluid (DF) to activated sludge in laboratory sequencing batch reactors (SBRs) for municipal wastewater treatment. Ciliate assemblage, the most dynamic component of eukaryotes in activated sludge, and which is highly sensitive to changes in the system, was evaluated. The average ciliate abundance dropped by about 51% (SBR 2; 1% DF added) and 33% (SBR 3; 3% DF added) in comparison to the control (SBR 1; wastewater only). A decrease in the total number of ciliate species during the experiment was observed, from 25 to 24 in SBR 2 and from 17 to 13 in SBR 3. Moreover, a drop in the number of dominant (>100 individuals mL) ciliate species was observed during the experiment-from eight in the control to five in SBR 2 and four in SBR 3-signaling noticeable changes in the quantitative structure of ciliate species. The species analyzed showed different responses to DF addition. The most sensitive was , which is bacteriovorus. In contrast, two predators, and , showed no reaction to DF addition. Our results indicate that addition of potassium-polymer DF, in doses of 1 to 3% of the treated wastewater volume, had no toxic effects on ciliates, but qualitative and quantitative changes in their community were observed.

  14. Comparative study of the adsorption of acetaminophen on activated carbons in simulated gastric fluid.

    PubMed

    Rey-Mafull, Carlos A; Tacoronte, Juan E; Garcia, Raquel; Tobella, Jorge; Llópiz, Julio C; Iglesias, Alberto; Hotza, Dachamir

    2014-01-01

    Samples of commercial activated carbons (AC) obtained from different sources: Norit E Supra USP, Norit B Test EUR, and ML (Baracoa, Cuba) were investigated. The adsorption of acetaminophen, Co = 2500 mg/L, occured in simulated gastric fluid (SGF) at pH 1.2 in contact with activated carbon for 4 h at 310 K in water bath with stirring. Residual acetaminophen was monitored by UV visible. The results were converted to scale adsorption isotherms using alternative models: Langmuir TI and TII, Freundlich, Dubinin-Radushkevich (DR) and Temkin. Linearized forms of the characteristic parameters were obtained in each case. The models that best fit the experimental data were Langmuir TI and Temkin with R(2) ≥0.98. The regression best fits followed the sequence: Langmuir TI = Temkin > DR > LangmuirTII > Freundlich. The microporosity determined by adsorption of CO2 at 273 K with a single term DR regression presented R(2) > 0.98. The adsorption of acetaminophen may occur in specific sites and also in the basal region. It was determined that the adsorption process of acetaminophen on AC in SGF is spontaneous (ΔG <0) and exothermic (-ΔHads.). Moreover, the area occupied by the acetaminophen molecule was calculated with a relative error from 7.8 to 50%.

  15. TRPV4 channel is involved in the coupling of fluid viscosity changes to epithelial ciliary activity

    PubMed Central

    Andrade, Yaniré N.; Fernandes, Jacqueline; Vázquez, Esther; Fernández-Fernández, José M.; Arniges, Maite; Sánchez, Trinidad M.; Villalón, Manuel; Valverde, Miguel A.

    2005-01-01

    Autoregulation of the ciliary beat frequency (CBF) has been proposed as the mechanism used by epithelial ciliated cells to maintain the CBF and prevent the collapse of mucociliary transport under conditions of varying mucus viscosity. Despite the relevance of this regulatory response to the pathophysiology of airways and reproductive tract, the underlying cellular and molecular aspects remain unknown. Hamster oviductal ciliated cells express the transient receptor potential vanilloid 4 (TRPV4) channel, which is activated by increased viscous load involving a phospholipase A2–dependent pathway. TRPV4-transfected HeLa cells also increased their cationic currents in response to high viscous load. This mechanical activation is prevented in native ciliated cells loaded with a TRPV4 antibody. Application of the TRPV4 synthetic ligand 4α-phorbol 12,13-didecanoate increased cationic currents, intracellular Ca2+, and the CBF in the absence of a viscous load. Therefore, TRPV4 emerges as a candidate to participate in the coupling of fluid viscosity changes to the generation of the Ca2+ signal required for the autoregulation of CBF. PMID:15753126

  16. Symmetry-breaking magnetic fields create a vortex fluid that exhibits a negative viscosity, active wetting, and strong mixing.

    PubMed

    Martin, James E; Solis, Kyle J

    2014-06-14

    There are many areas of science and technology where being able to generate vigorous, noncontact flow would be desirable. We have discovered that three dimensional, time-dependent electric or magnetic fields having key symmetries can be used to generate controlled fluid motion by the continuous injection of energy. Unlike natural convection, this approach does not require a thermal gradient as an energy source, nor does it require gravity, so space applications are feasible. The result is a highly active material we call a vortex fluid. The homogeneous torque density of this fluid enables it to climb walls, induce ballistic droplet motion, and mix vigorously, even in such complex geometries as porous media. This vortex fluid can also exhibit a negative viscosity, which can immeasurably extend the control range of the "smart fluids" used in electro- and magnetorheological devices and can thus significantly increase their performance. Because the applied fields are uniform and modest in strength, vortex fluids of any scale can be created, making applications of any size, from directing microdroplet motion to controlling damping in magnetorheological dampers that protect bridges and buildings from earthquakes, feasible.

  17. Development of a selected reaction monitoring mass spectrometry-based assay to detect asparaginyl endopeptidase activity in biological fluids

    PubMed Central

    Walker, Michael J.; Gray, Oliver J.; Parker, Catriona; Holland, Mark; Williamson, Andrew J.K.; Pierce, Andrew; Unwin, Richard D.; Krishnan, Shekhar

    2016-01-01

    Cancer Biomarkers have the capability to improve patient outcomes. They have potential applications in diagnosis, prognosis, monitoring of disease progression and measuring response to treatment. This type of information is particularly useful in the individualisation of treatment regimens. Biomarkers may take many forms but considerable effort has been made to identify and quantify proteins in biological fluids. However, a major challenge in measuring protein in biological fluids, such as plasma, is the sensitivity of the assay and the complex matrix of proteins present. Furthermore, determining the effect of proteases in disease requires measurement of their activity in biological fluids as quantification of the protein itself may not provide sufficient information. To date little progress has been made towards monitoring activity of proteases in plasma. The protease asparaginyl endopeptidase has been implicated in diseases such as breast cancer, leukaemia and dementia. Here we describe a new approach to sensitively and in a targeted fashion quantify asparaginyl endopeptidase activity in plasma using a synthetic substrate peptide protected from nonspecific hydrolysis using D-amino acids within the structure. Our selected reaction monitoring approach enabled asparaginyl endopeptidase activity to be measured in human plasma with both a high dynamic range and sensitivity. This manuscript describes a paradigm for future development of assays to measure protease activities in biological fluids as biomarkers of disease. PMID:27683124

  18. The freezing point depression of mammalian tissues in relation to the question of osmotic activity of cell fluid.

    PubMed

    APPELBOOM, J W; BRODSKY, W A; DENNIS, W H; DIAMOND, I; MILEY, J F; REHM, W S

    1956-11-20

    The freezing point depression of freshly excised frozen tissues, pulverized in a hydraulic press or in a mortar, is greater than that of plasma. Even at 0 degrees C. the freezing point depression of such homogenates increases significantly with time. Dilution data indicate that such freezing point data are valid. The presence of intact cells has been shown in smears of tissues pulverized in a mortar, but not in smears of those crushed in a hydraulic press. The osmolarity of various diluent solutions affects the calculated osmotic activity of tissue homogenates presumably because of delayed diffusion between the diluent and cell fluid. With a hypertonic NaCl diluent, spuriously low values of tissue osmotic activity are found from calculations assuming instantaneous mixing between homogenates and diluents. The limitations of data from cryoscopic experiments and from tissue-swelling experiments are discussed in relation to the basic question of whether or not cell fluid is isotonic to extracellular fluid.

  19. Colloidal nanomaterial-based immunoassay.

    PubMed

    Teste, Bruno; Descroix, Stephanie

    2012-06-01

    Nanomaterials have been widely developed for their use in nanomedicine, especially for immunoassay-based diagnosis. In this review we focus on the use of nanomaterials as a nanoplatform for colloidal immunoassays. While conventional heterogeneous immunoassays suffer from mass transfer limitations and consequently long assay time, colloidal immunosupports allow target capture in the entire volume, thus speeding up reaction kinetics and shortening assay time. Owing to their wide range of chemical and physical properties, nanomaterials are an interesting candidate for immunoassay development. The most popular colloidal nanomaterials for colloidal immunoassays will be discussed, as well as their influence on immune reactions. Recent advances in nanomaterial applications for different formats of immunoassays will be reported, such as nanomaterial-based indirect immunoassays, optical-based agglutination immunoassays, resonance energy transfer-based immunoassays and magnetic relaxation-based immunoassays. Finally, the future of using nanomaterials for homogeneous immunoassays dedicated to clinical diagnosis will be discussed.

  20. Nanoparticle dispersions: A colloid and polymer solution perspective

    NASA Astrophysics Data System (ADS)

    van der Schoot, Paul

    For most solid nanoparticles there are no true solvents in the sense that a powder or crystal of these nanoparticles would spontaneously dissolve when immersed in them. There are exceptions but these typically involve unusual solvents such as super acids or chemical modification of the particles to make particles and solvent compatible. Conventional fluids, including water, are generally poor solvents or dispersants and in them the nanoparticles need to be stabilised against aggregation. Indeed, nanoparticles dispersed or dissolved in a liquid behave very much like polymers and colloidal particles do. The properties of such dispersions can thus be understood in terms of what is known about the behaviour of colloids and polymer solutions. Important aspects are Van der Waals and Coulomb interactions, steric interactions, the impact of depletion agents, phase separation and the tendency of elongated colloidal particles and stiff polymers to form nematic and other types of liquid-crystalline phase. For this book a question of particular interest is how the nanoparticles behave if they are present in a liquid crystalline host fluid, and what kind of medium-induced interaction operates between these particles. However, most types of interaction are also present in isotropic host uids, so the attention of this chapter will primarily be directed towards conventional dispersions. I shall give an overview of the physico-chemical principles most relevant to understanding the behaviour of fluid dispersions and solutions of nanoparticles, using spherical, cylindrical and at, plate-like nanoparticles as illustrative examples.

  1. Introduced materials and colloid formation: A report on the current state of knowledge

    SciTech Connect

    Meike, A.; Wittwer, C.

    1993-11-01

    This paper reviews potential sources of colloids and enhanced adsorption of radionuclides that may stem from materials introduced into a repository setting. Three major sources of colloids are examined: metals, cements, and organics. The sensitivity of colloids to chemical species, pH, time, temperature, radiolysis, redox state, gradients of the aforementioned variables, and microbial activity is shown. The authors consider these influences on colloid formation and sorption with respect to introduced materials. They also discuss areas that have not been addressed but may have consequences in a repository setting.

  2. Colloidal motility and patterning by physical chemotaxis

    NASA Astrophysics Data System (ADS)

    Palacci, Jeremie; Abecassis, Benjamin; Cottin-Bizonne, Cecile; Ybert, Christophe; Bocquet, Lyderic

    2009-11-01

    We developped a microfluidic setup to show the motility of colloids or biomolecules under a controlled salt gradient thanks to the diffusiophoresis phenomenon [1,2]. We can therefore mimic chemotaxis on simple physical basis with thrilling analogies with the biological chemotaxis of E. Coli bacteria: salt dependance of the velocity [3] and log-sensing behavior [4]. In addition with a temporally tunable gradient we show we can generate an effective osmotic potential to trap colloids or DNA. These experimental observations are supported by numerical simulations and an asymptotic ratchet model. Finally, we use these traps to generate various patterns and because concentration gradients are ubiquitous in nature, we question for the role of such a mecanism in morphogenesis [5] or positioning perspectives in cells [6]. [4pt] [1] B. Abecassis, C. Cottin-Bizonne, C. Ybert, A. Ajdari, and L. Bocquet, Nat. Mat., 7(10):785--789, 2008. [2] Anderson, Ann. Rev. Fluid Mech, 21, 1989. [3] Y. L. Qi and J. Adler, PNAS, 86(21):8358--8362, 1989. [4] Y. V. Kalinin, L. L. Jiang, Y. H. Tu, and M. M. Wu, Biophys. J., 96(6):2439--2448, 2009. [4] J. B. Moseley, A. Mayeux, A. Paoletti, and P. Nurse, Nat., 459(7248):857--U8, 2009. [6] L. Wolpert, Dev., 107:3--12, 1989

  3. Dynamics of Polymers in Colloidal Flows

    NASA Astrophysics Data System (ADS)

    Chen, Hsieh; Alexander-Katz, Alfredo

    2011-03-01

    This research is motivated by recent studies on the von Willebrand factor (vWF), a large multimeric protein that plays an essential role in the initial stages of blood clotting in blood vessels. Recent experiments substantiated the hypothesis that the vWF is activated by shear stress in blood flow that causes its shape to transform from a compact globule to an extended state, and biological function is obtained only in the extended state. Simple simulations (which only consider a single polymer in bulk shear flow) have successfully reproduced the observed dynamics of the vWF. However, a more refined model is still demanding for the better understanding of the behaviors of this biomolecule in the physiological environments. Here we refine the existing model by adding the drifting colloids into the flows to mimic the presence of the blood cells in the bloodstream. Preliminary result shows that colloids greatly influence the dynamics of the polymers. It is observed that the average extensions of polymers along and perpendicular to the shear flow direction are both increased with the presence of the colloids.

  4. Mechanical Failure in Colloidal Gels

    NASA Astrophysics Data System (ADS)

    Kodger, Thomas Edward

    When colloidal particles in a dispersion are made attractive, they aggregate into fractal clusters which grow to form a space-spanning network, or gel, even at low volume fractions. These gels are crucial to the rheological behavior of many personal care, food products and dispersion-based paints. The mechanical stability of these products relies on the stability of the colloidal gel network which acts as a scaffold to provide these products with desired mechanical properties and to prevent gravitational sedimentation of the dispersed components. Understanding the mechanical stability of such colloidal gels is thus of crucial importance to predict and control the properties of many soft solids. Once a colloidal gel forms, the heterogeneous structure bonded through weak physical interactions, is immediately subject to body forces, such as gravity, surface forces, such as adhesion to a container walls and shear forces; the interplay of these forces acting on the gel determines its stability. Even in the absence of external stresses, colloidal gels undergo internal rearrangements within the network that may cause the network structure to evolve gradually, in processes known as aging or coarsening or fail catastrophically, in a mechanical instability known as syneresis. Studying gel stability in the laboratory requires model colloidal system which may be tuned to eliminate these body or endogenous forces systematically. Using existing chemistry, I developed several systems to study delayed yielding by eliminating gravitational stresses through density matching and cyclic heating to induce attraction; and to study syneresis by eliminating adhesion to the container walls, altering the contact forces between colloids, and again, inducing gelation through heating. These results elucidate the varied yet concomitant mechanisms by which colloidal gels may locally or globally yield, but then reform due to the nature of the physical, or non-covalent, interactions which form

  5. Influence of an Additive-Free Particle Spreading Method on Interactions between Charged Colloidal Particles at an Oil/Water Interface.

    PubMed

    Gao, Peng; Yi, Zonglin; Xing, Xiaochen; Ngai, To; Jin, Fan

    2016-05-17

    The assembly and manipulation of charged colloidal particles at oil/water interfaces represent active areas of fundamental and applied research. Previously, we have shown that colloidal particles can spontaneously generate unstable residual charges at the particle/oil interface when spreading solvent is used to disperse them at an oil/water interface. These residual charges in turn affect the long-ranged electrostatic repulsive forces and packing of particles at the interface. To further uncover the influence arising from the spreading solvents on interfacial particle interactions, in the present study we utilize pure buoyancy to drive the particles onto an oil/water interface and compare the differences between such a spontaneously adsorbed particle monolayer to the spread monolayer based on solvent spreading techniques. Our results show that the solvent-free method could also lead particles to spread well at the interface, but it does not result in violent sliding of particles along the interface. More importantly, this additive-free spreading method can avoid the formation of unstable residual charges at the particle/oil interface. These findings agree well with our previous hypothesis; namely, those unstable residual charges are triboelectric charges that arise from the violently rubbing of particles on oil at the interface. Therefore, if the spreading solvents could be avoided, then we would be able to get rid of the formation of residual charges at interfaces. This finding will provide insight for precisely controlling the interactions among colloidal particles trapped at fluid/fluid interfaces.

  6. Aggregation of Heterogeneously Charged Colloids.

    PubMed

    Dempster, Joshua M; Olvera de la Cruz, Monica

    2016-06-28

    Patchy colloids are attractive as programmable building blocks for metamaterials. Inverse patchy colloids, in which a charged surface is decorated with patches of the opposite charge, are additionally noteworthy as models for heterogeneously charged biological materials such as proteins. We study the phases and aggregation behavior of a single charged patch in an oppositely charged colloid with a single-site model. This single-patch inverse patchy colloid model shows a large number of phases when varying patch size. For large patch sizes we find ferroelectric crystals, while small patch sizes produce cross-linked gels. Intermediate values produce monodisperse clusters and unusual worm structures that preserve finite ratios of area to volume. The polarization observed at large patch sizes is robust under extreme disorder in patch size and shape. We examine phase-temperature dependence and coexistence curves and find that large patch sizes produce polarized liquids, in contrast to mean-field predictions. Finally, we introduce small numbers of unpatched charged colloids. These can either suppress or encourage aggregation depending on their concentration and the size of the patches on the patched colloids. These effects can be exploited to control aggregation and to measure effective patch size.

  7. Colloid Mobilization and Porous Media Permeability Changes by Dynamic Stress Stimulations

    SciTech Connect

    Abdel-Fattah, Amr I.; Roberts, Peter M; Tarimala, Sowmitri; Ibrahim, Reem; Beckham, Richard

    2010-12-10

    Laboratory experiments on porous rock cores have shown that seismic-band (100 Hz or less) mechanical stress/strain cycling of the rock matrix can mobilize sub-pore-size particles (colloids) trapped in the pore space and allow them to be expelled during steady-state water flow. This coupling of dynamic stress to colloid mobility is a potential key mechanism whereby seismic waves may alter formation permeability and porous mass transport in Earth's crust. Experiments where colloid suspensions were injected into Fontainebleau sandstone cores demonstrated that colloid size and the ionic strength of the suspending fluid are major parameters that will control the ability of the colloids to attach to pore walls or to form particle bridges at pore throats. Both effects can lead to significant changes in permeability. A unique core-holder apparatus that applies low-frequency mechanical stress/strain to 2.54-cm-diameter porous rock samples during constant-rate fluid flow was used for those experiments. Microsphere injection caused the core's permeability to decline due to colloid bridging at pore throats. It was found that dynamic stress at 25 to 50 Hz mobilized these trapped colloids mainly when the ionic strength is low, and thereby partially restored the permeability of the sample. These earlier experiments on natural rocks were difficult to interpret in terms of how the colloids distributed themselves throughout the heterogeneous pore space and what interactions were occurring between the colloids and the solid matrix. Observed permeability changes appeared to be confined to the first 5-10 cm of the rock where the colloids were injected, yet significant transport of colloids was observed along the entire length of the sample. The 'natural rock' system is too complex geometrically at the pore scale to allow quantification of mass transport properties along its entire length. To remedy this problem, new colloid transport experiments were performed with a synthetic glass

  8. Migrating Activity of the 2010 Madison Plateau, Yellowstone National Park, Earthquake Swarm: Evidence for Fluid Triggering?

    NASA Astrophysics Data System (ADS)

    Shelly, D. R.; Hill, D. P.; Farrell, J.; Massin, F.; Smith, R. B.

    2012-12-01

    activity may have been triggered by the rupture of a confined high-pressure fluid system into neighboring pre-existing crustal fractures. Besides the outward expansion of hypocenters in a manner consistent with diffusional fluid flow, we observe that the swarm activity front is usually led by small earthquakes rather than large ones. The front sometimes propagates outwardly in linear "finger-like" structures consistent with pressure increases along highly permeable linear pathways. Interestingly, nodal planes from double-couple-constrained fault solutions are dominantly strike-slip and are oblique to the general trend of hypocenters. This may suggest en-echelon faulting and/or a component of fault opening, perhaps in a fracture mesh geometry similar to that envisioned by Hill [1977]. The primary dipping structure is likely an inherited Basin and Range normal fault, which could provide a permeable pathway of this orientation. This swarm exhibits many similarities with the 1985 Yellowstone swarm just 5 km to the NW, including its migration patterns and dominant orientation (roughly perpendicular to both the minimum regional compressive stress and the caldera boundary). It is also only ~20 km SE from the closest rupture of the deadly M 7.3 1959 Hebgen Lake normal-faulting earthquake.

  9. Confocal imaging of confined quiescent and flowing colloid-polymer mixtures.

    PubMed

    Pandey, Rahul; Spannuth, Melissa; Conrad, Jacinta C

    2014-05-20

    The behavior of confined colloidal suspensions with attractive interparticle interactions is critical to the rational design of materials for directed assembly(1-3), drug delivery(4), improved hydrocarbon recovery(5-7), and flowable electrodes for energy storage(8). Suspensions containing fluorescent colloids and non-adsorbing polymers are appealing model systems, as the ratio of the polymer radius of gyration to the particle radius and concentration of polymer control the range and strength of the interparticle attraction, respectively. By tuning the polymer properties and the volume fraction of the colloids, colloid fluids, fluids of clusters, gels, crystals, and glasses can be obtained(9). Confocal microscopy, a variant of fluorescence microscopy, allows an optically transparent and fluorescent sample to be imaged with high spatial and temporal resolution in three dimensions. In this technique, a small pinhole or slit blocks the emitted fluorescent light from regions of the sample that are outside the focal volume of the microscope optical system. As a result, only a thin section of the sample in the focal plane is imaged. This technique is particularly well suited to probe the structure and dynamics in dense colloidal suspensions at the single-particle scale: the particles are large enough to be resolved using visible light and diffuse slowly enough to be captured at typical scan speeds of commercial confocal systems(10). Improvements in scan speeds and analysis algorithms have also enabled quantitative confocal imaging of flowing suspensions(11-16,37). In this paper, we demonstrate confocal microscopy experiments to probe the confined phase behavior and flow properties of colloid-polymer mixtures. We first prepare colloid-polymer mixtures that are density- and refractive-index matched. Next, we report a standard protocol for imaging quiescent dense colloid-polymer mixtures under varying confinement in thin wedge-shaped cells. Finally, we demonstrate a protocol

  10. Colloid Transport in Unsaturated Porous Media: 3D Visualization Using Synchrotron X-Ray Microtomography

    NASA Astrophysics Data System (ADS)

    Brueck, C. L.; Meisenheimer, D.; Wildenschild, D.

    2015-12-01

    Understanding the mechanisms controlling colloid transport and deposition in the vadose zone is an important step in protecting our water resources. Not only may these particles themselves be undesirable contaminants, but they can also aid in the transport of smaller, molecular-scale contaminants by chemical attachment. In this research, we examined the influence that air-water interfaces (AWI) and air-water-solid contact lines (AWS) have on colloid deposition and mobilization in three-dimensional systems. We used x-ray microtomography to visualize the transport of hydrophobic colloids as they move through a partially saturated glass bead pack. Drainage and imbibition experiments were conducted using syringe pumps to control the flow of a colloid suspension through the porous media at 0.6 mL/hr. The high ionic strength fluid was adjusted to a pH of 9.5 and a concentration of 1.0 mol/L KI. During the drainage and imbibition, the flow was periodically halted and allowed to equilibrate before collecting the microtomography scans. Dopants were used to enhance the contrast between the four phases (water, air, beads, and colloids), including potassium iodide dissolved in the fluid, and an outer layer of silver coating the colloids. We hypothesized that AWIs and AWSs will scour and mobilize a significant percentage of colloids, and therefore reduce the concentration of colloids along the vertical profile of the column. The concentration of potassium iodide, and thus the ionic strength, necessary for adequate image segmentation was also explored in separate experiments so that the influence of ionic strength on colloid deposition and mobilization can be studied.

  11. Onset of anomalous diffusion in colloids confined to quasimonolayers

    NASA Astrophysics Data System (ADS)

    Bleibel, J.; Domínguez, Alvaro; Oettel, M.

    2017-03-01

    It has been recently shown that a colloidal monolayer, e.g., formed at a fluid interface or by means of a suitable confining potential, exhibits anomalous collective diffusion. This is a consequence of the hydrodynamic interactions mediated by the three-dimensional (3D) ambient fluid when the particles are confined to reside on a two-dimensional (2D) manifold. We study theoretically and with numerical simulations the crossover from normal to anomalous diffusion as the particles are, in real systems, confined by a 3D external potential and thus have the possibility to fluctuate out of the 2D manifold, thus forming a quasimonolayer.

  12. March 2016 Memo: Planning for Removal and Remedial Activities at Hardrock Mining and Mineral Processing Sites with Fluid Hazards

    EPA Pesticide Factsheets

    Memo from EPA Assistant Administrator Mathy Stanislaus, regarding planning for removal and remedial activities at hardrock mining and mineral processing sites with fluid hazards, and to share the Agency’s expectations for the work that is done at these sit

  13. Comparison of In Vitro Activity of Liposomal Nystatin against Aspergillus Species with Those of Nystatin, Amphotericin B (AB) Deoxycholate, AB Colloidal Dispersion, Liposomal AB, AB Lipid Complex, and Itraconazole

    PubMed Central

    Oakley, Karen L.; Moore, Caroline B.; Denning, David W.

    1999-01-01

    We compared the in vitro activity of liposomal nystatin (Nyotran) with those of other antifungal agents against 60 Aspergillus isolates. Twelve isolates were itraconazole resistant. For all isolates, geometric mean (GM) MICs (micrograms per milliliter) were 2.30 for liposomal nystatin, 0.58 for itraconazole, 0.86 for amphotericin B (AB) deoxycholate, 9.51 for nystatin, 2.07 for liposomal AB, 2.57 for AB lipid complex, and 0.86 for AB colloidal dispersion. Aspergillus terreus (GM, 8.72 μg/ml; range, 8 to 16 μg/ml) was significantly less susceptible to all of the polyene drugs than all other species (P = 0.0001). PMID:10223948

  14. Self-assembly of colloidal rafts

    NASA Astrophysics Data System (ADS)

    Sharma, Prerna; Gibaud, Thoams; Ward, Andrew; Dogic, Zvonimir

    2013-03-01

    Interactions between nanometer-sized particles or molecules suspended in a bulk fluid are well understood. However, when such particles are embedded in a membrane, the inter-particle potential is significantly modified by membrane mediated forces and gives rise to novel phase behavior. Visualizing and manipulating such inclusions in a lipid bilayer is difficult due to the nanometer length scales involved. Here, we use a model system of micron sized colloidal membranes doped with molecules shorter or longer than that of the bulk. Surprisingly, the dopant molecules form self-limited finite size clusters. These clusters further self-organize into a wide variety of higher order structures such as hexagonal and square lattice arrays, lamellar patterns and saddle shaped surfaces. Understanding the phase behavior and measuring repulsive forces between such clusters may have implications for the similar mechanisms that operate in conventional lipid bilayers.

  15. Devitrification of colloidal glasses in real space.

    PubMed

    Simeonova, Nikoleta B; Dullens, Roel P A; Aarts, Dirk G A L; de Villeneuve, Volkert W A; Lekkerkerker, Henk N W; Kegel, Willem K

    2006-04-01

    Confocal scanning laser microscopy has been used to quantitatively analyze the structure and dynamics of concentrated suspensions of spherical colloids in which the magnitude of the short-range attractive potential is increased by adding nonadsorbing polymers. These systems undergo a reentrant glass transition upon increasing polymer concentration. We find that melting of the glass is accompanied by significant changes in the displacement distribution and its moments. However, no significant variations have been detected in the shapes of the displacement distributions. Moreover, structural correlation functions and the magnitude of local density fluctuations do not vary significantly between the glass states and the fluid. Considering our experimental setup, these observations imply that local density fluctuations cannot be larger than a few percent of the average density.

  16. Apparatus for irradiating a continuously flowing stream of fluid. [For neutron activation analysis

    DOEpatents

    Speir, L.G.; Adams, E.L.

    1982-05-13

    An apparatus for irradiating a continuously flowing stream of fluid is disclosed. The apparatus consists of a housing having a spherical cavity and a spherical moderator containing a radiation source positioned within the spherical cavity. The spherical moderator is of lesser diameter than the spherical cavity so as to define a spherical annular volume around the moderator. The housing includes fluid intake and output conduits which open onto the spherical cavity at diametrically opposite positions. Fluid flows through the cavity around the spherical moderator and is uniformly irradiated due to the 4..pi.. radiation geometry. The irradiation source, for example a /sup 252/Cf neutron source, is removable from the spherical moderator through a radial bore which extends outwardly to an opening on the outside of the housing. The radiation source may be routinely removed without interrupting the flow of fluid or breaching the containment of the fluid.

  17. Composition and antioxidant activity of Thymus vulgaris volatiles: comparison between supercritical fluid extraction and hydrodistillation.

    PubMed

    Grosso, Clara; Figueiredo, Ana Cristina; Burillo, Jesus; Mainar, Ana M; Urieta, José S; Barroso, José G; Coelho, José A; Palavra, António M F

    2010-07-01

    Supercritical fluid extraction (SFE) of the volatile oil from Thymus vulgaris L. aerial flowering parts was performed under different conditions of pressure, temperature, mean particle size and CO(2) flow rate and the correspondent yield and composition were compared with those of the essential oil isolated by hydrodistillation (HD). Both the oils were analyzed by GC and GC-MS and 52 components were identified. The main volatile components obtained were p-cymene (10.0-42.6% for SFE and 28.9-34.8% for HD), gamma-terpinene (0.8-6.9% for SFE and 5.1-7.0% for HD), linalool (2.3-5.3% for SFE and 2.8-3.1% for HD), thymol (19.5-40.8% for SFE and 35.4-41.6% for HD), and carvacrol (1.4-3.1% for SFE and 2.6-3.1% for HD). The main difference was found to be the relative percentage of thymoquinone (not found in the essential oil) and carvacryl methyl ether (1.0-1.2% for HD versus t-0.4 for SFE) which can explain the higher antioxidant activity, assessed by Rancimat test, of the SFE volatiles when compared with HD. Thymoquinone is considered a strong antioxidant compound.

  18. Human Cerebrospinal Fluid Promotes Neuronal Viability and Activity of Hippocampal Neuronal Circuits In Vitro

    PubMed Central

    Perez-Alcazar, Marta; Culley, Georgia; Lyckenvik, Tim; Mobarrez, Kristoffer; Bjorefeldt, Andreas; Wasling, Pontus; Seth, Henrik; Asztely, Frederik; Harrer, Andrea; Iglseder, Bernhard; Aigner, Ludwig; Hanse, Eric; Illes, Sebastian

    2016-01-01

    For decades it has been hypothesized that molecules within the cerebrospinal fluid (CSF) diffuse into the brain parenchyma and influence the function of neurons. However, the functional consequences of CSF on neuronal circuits are largely unexplored and unknown. A major reason for this is the absence of appropriate neuronal in vitro model systems, and it is uncertain if neurons cultured in pure CSF survive and preserve electrophysiological functionality in vitro. In this article, we present an approach to address how human CSF (hCSF) influences neuronal circuits in vitro. We validate our approach by comparing the morphology, viability, and electrophysiological function of single neurons and at the network level in rat organotypic slice and primary neuronal cultures cultivated either in hCSF or in defined standard culture media. Our results demonstrate that rodent hippocampal slices and primary neurons cultured in hCSF maintain neuronal morphology and preserve synaptic transmission. Importantly, we show that hCSF increases neuronal viability and the number of electrophysiologically active neurons in comparison to the culture media. In summary, our data indicate that hCSF represents a physiological environment for neurons in vitro and a superior culture condition compared to the defined standard media. Moreover, this experimental approach paves the way to assess the functional consequences of CSF on neuronal circuits as well as suggesting a novel strategy for central nervous system (CNS) disease modeling. PMID:26973467

  19. Changes in Purines Concentration in the Cerebrospinal Fluid of Pregnant Women Experiencing Pain During Active Labor.

    PubMed

    Schmidt, André P; Böhmer, Ana E; Hansel, Gisele; Soares, Félix A; Oses, Jean P; Giordani, Alex T; Posso, Irimar P; Auler, José Otávio C; Mendes, Florentino F; Félix, Elaine A; Portela, Luís V; Souza, Diogo O

    2015-11-01

    Labor pain has been reported as a severe pain and can be considered as a model of acute visceral pain. It is well known that extracellular purines have an important role in pain signaling in the central nervous system. This study analyzes the relationship between extracellular purines and pain perception during active labor. A prospective observational study was performed. Cerebrospinal fluid (CSF) levels of the purines and their metabolites were compared between women at term pregnancy with labor pain (n = 49) and without labor pain (Caesarian section; n = 47). Control groups (healthy men and women without chronic or acute pain-n = 40 and 32, respectively) were also investigated. The CSF levels of adenosine were significantly lower in the labor pain group (P = 0.026) and negatively correlated with pain intensity measured by a visual analogue scale (r = -0.48, P = 0.0005). Interestingly, CSF levels of uric acid were significantly higher in healthy men as compared to women. Additionally, pregnant women showed increased CSF levels of ADP, GDP, adenosine and guanosine and reduced CSF levels of AMP, GTP, and uric acid as compared to non-pregnant women (P < 0.05). These findings suggest that purines, in special the nucleoside adenosine, are associated with pregnancy and labor pain.

  20. Liquid-vapor interfaces of patchy colloids

    NASA Astrophysics Data System (ADS)

    Oleksy, A.; Teixeira, P. I. C.

    2015-01-01

    We investigate the liquid-vapor interface of a model of patchy colloids. This model consists of hard spheres decorated with short-ranged attractive sites ("patches") of different types on their surfaces. We focus on a one-component fluid with two patches of type A and nine patches of type B (2 A 9 B colloids), which has been found to exhibit reentrant liquid-vapor coexistence curves and very low-density liquid phases. We have used the density-functional theory form of Wertheim's first-order perturbation theory of association, as implemented by Yu and Wu [J. Chem. Phys. 116, 7094 (2002), 10.1063/1.1463435], to calculate the surface tension, and the density and degree of association profiles, at the liquid-vapor interface of our model. In reentrant systems, where A B bonds dominate, an unusual thickening of the interface is observed at low temperatures. Furthermore, the surface tension versus temperature curve reaches a maximum, in agreement with Bernardino and Telo da Gama's mesoscopic Landau-Safran theory [Phys. Rev. Lett. 109, 116103 (2012), 10.1103/PhysRevLett.109.116103]. If B B attractions are also present, competition between A B and B B bonds gradually restores the monotonic temperature dependence of the surface tension. Lastly, the interface is "hairy," i.e., it contains a region where the average chain length is close to that in the bulk liquid, but where the density is that of the vapor. Sufficiently strong B B attractions remove these features, and the system reverts to the behavior seen in atomic fluids.

  1. How yawning switches the default-mode network to the attentional network by activating the cerebrospinal fluid flow.

    PubMed

    Walusinski, Olivier

    2014-03-01

    Yawning is a behavior to which little research has been devoted. However, its purpose has not yet been demonstrated and remains controversial. In this article, we propose a new theory involving the brain network that is functional during the resting state, that is, the default mode network. When this network is active, yawning manifests a process of switching to the attentional system through its capacity to increase circulation of cerebrospinal fluid (CSF), thereby increasing clearance of somnogenic factors (prostaglandin D(2), adenosine, and others) accumulating in the cerebrospinal fluid.

  2. Colloids in the River Inn

    NASA Astrophysics Data System (ADS)

    Ueckert, Martina; Baumann, Thomas

    2014-05-01

    In the light of an increasing number of technical applications using nanoparticles and reports of adverse effects of engineered nanoparticles, research on the occurrence and stability of particles in all compartments has to be intensified. Colloids in river water represent the geologic setting, environmental conditions, and the anthropogenic use in its catchment. The river not only acts as a sink for nanoparticles but also as the source term due to exchange in the hyporheic zone and in bank filtration setups. The concentration, size distribution and elemental composition of particles in the River Inn were studied from the source in the Swiss Alps to the river mouth at Passau. Samples were collected after each tributary from a sub-catchment and filtered on-site. The elemental composition was determined after acid digestion with ICP/MS. SEM/EDX analyses provided morphological and elemental information for single particles. A complementary chemical analysis of the river water was performed to assess the geochemical stability of indvidual particles. Particles in the upper, rural parts mainly reveal changes in the geological setting of the tributary catchments. Not unexpectedly, particles originating from crystalline rocks, were more stable than particles originating from calcareous rocks. Anthropogenic and industrial influences increase in the lower parts. This went together with a change of the size distribution, an increase of the number of organic particles, and a decrease of the microfauna. Interestingly, specific leisure activities in a sub-catchment, like extensive downhill skiing, manifest itself in the particle composition.

  3. Realizing the Physics of Motile Cilia Synchronization with Driven Colloids

    NASA Astrophysics Data System (ADS)

    Bruot, Nicolas; Cicuta, Pietro

    2016-03-01

    Cilia and flagella in biological systems often show large scale cooperative behaviors such as the synchronization of their beats in "metachronal waves." These are beautiful examples of emergent dynamics in biology, and are essential for life, allowing diverse processes from the motility of eukaryotic microorganisms, to nutrient transport and clearance of pathogens from mammalian airways. How these collective states arise is not fully understood, but it is clear that individual cilia interact mechanically, and that a strong and long-ranged component of the coupling is mediated by the viscous fluid. We review here the work by ourselves and others aimed at understanding the behavior of hydrodynamically coupled systems, and particularly a set of results that have been obtained both experimentally and theoretically by studying actively driven colloidal systems. In these controlled scenarios, it is possible to selectively test aspects of living motile cilia, such as the geometrical arrangement, the effects of the driving profile and the distance to no-slip boundaries. We outline and give examples of how it is possible to link model systems to observations on living systems, which can be made on microorganisms, on cell cultures or on tissue sections. This area of research has clear clinical application in the long term, as severe pathologies are associated with compromised cilia function in humans.

  4. Physics of complex and supermolecular fluids

    SciTech Connect

    Safran, S.A.; Clark, N.A.

    1987-01-01

    The auth