Science.gov

Sample records for active contour algorithm

  1. Contour Error Map Algorithm

    NASA Technical Reports Server (NTRS)

    Merceret, Francis; Lane, John; Immer, Christopher; Case, Jonathan; Manobianco, John

    2005-01-01

    The contour error map (CEM) algorithm and the software that implements the algorithm are means of quantifying correlations between sets of time-varying data that are binarized and registered on spatial grids. The present version of the software is intended for use in evaluating numerical weather forecasts against observational sea-breeze data. In cases in which observational data come from off-grid stations, it is necessary to preprocess the observational data to transform them into gridded data. First, the wind direction is gridded and binarized so that D(i,j;n) is the input to CEM based on forecast data and d(i,j;n) is the input to CEM based on gridded observational data. Here, i and j are spatial indices representing 1.25-km intervals along the west-to-east and south-to-north directions, respectively; and n is a time index representing 5-minute intervals. A binary value of D or d = 0 corresponds to an offshore wind, whereas a value of D or d = 1 corresponds to an onshore wind. CEM includes two notable subalgorithms: One identifies and verifies sea-breeze boundaries; the other, which can be invoked optionally, performs an image-erosion function for the purpose of attempting to eliminate river-breeze contributions in the wind fields.

  2. Algorithm for Constructing Contour Plots

    NASA Technical Reports Server (NTRS)

    Johnson, W.; Silva, F.

    1984-01-01

    General computer algorithm developed for construction of contour plots. algorithm accepts as input data values at set of points irregularly distributed over plane. Algorithm based on interpolation scheme: points in plane connected by straight-line segments to form set of triangles. Program written in FORTRAN IV.

  3. CT liver volumetry using geodesic active contour segmentation with a level-set algorithm

    NASA Astrophysics Data System (ADS)

    Suzuki, Kenji; Epstein, Mark L.; Kohlbrenner, Ryan; Obajuluwa, Ademola; Xu, Jianwu; Hori, Masatoshi; Baron, Richard

    2010-03-01

    Automatic liver segmentation on CT images is challenging because the liver often abuts other organs of a similar density. Our purpose was to develop an accurate automated liver segmentation scheme for measuring liver volumes. We developed an automated volumetry scheme for the liver in CT based on a 5 step schema. First, an anisotropic smoothing filter was applied to portal-venous phase CT images to remove noise while preserving the liver structure, followed by an edge enhancer to enhance the liver boundary. By using the boundary-enhanced image as a speed function, a fastmarching algorithm generated an initial surface that roughly estimated the liver shape. A geodesic-active-contour segmentation algorithm coupled with level-set contour-evolution refined the initial surface so as to more precisely fit the liver boundary. The liver volume was calculated based on the refined liver surface. Hepatic CT scans of eighteen prospective liver donors were obtained under a liver transplant protocol with a multi-detector CT system. Automated liver volumes obtained were compared with those manually traced by a radiologist, used as "gold standard." The mean liver volume obtained with our scheme was 1,520 cc, whereas the mean manual volume was 1,486 cc, with the mean absolute difference of 104 cc (7.0%). CT liver volumetrics based on an automated scheme agreed excellently with "goldstandard" manual volumetrics (intra-class correlation coefficient was 0.95) with no statistically significant difference (p(F<=f)=0.32), and required substantially less completion time. Our automated scheme provides an efficient and accurate way of measuring liver volumes.

  4. Sunspots and Coronal Bright Points Tracking using a Hybrid Algorithm of PSO and Active Contour Model

    NASA Astrophysics Data System (ADS)

    Dorotovic, I.; Shahamatnia, E.; Lorenc, M.; Rybansky, M.; Ribeiro, R. A.; Fonseca, J. M.

    2014-02-01

    In the last decades there has been a steady increase of high-resolution data, from ground-based and space-borne solar instruments, and also of solar data volume. These huge image archives require efficient automatic image processing software tools capable of detecting and tracking various features in the solar atmosphere. Results of application of such tools are essential for studies of solar activity evolution, climate change understanding and space weather prediction. The follow up of interplanetary and near-Earth phenomena requires, among others, automatic tracking algorithms that can determine where a feature is located, on successive images taken along the period of observation. Full-disc solar images, obtained both with the ground-based solar telescopes and the instruments onboard the satellites, provide essential observational material for solar physicists and space weather researchers for better understanding the Sun, studying the evolution of various features in the solar atmosphere, and also investigating solar differential rotation by tracking such features along time. Here we demonstrate and discuss the suitability of applying a hybrid Particle Swarm Optimization (PSO) algorithm and Active Contour model for tracking and determining the differential rotation of sunspots and coronal bright points (CBPs) on a set of selected solar images. The results obtained confirm that the proposed approach constitutes a promising tool for investigating the evolution of solar activity and also for automating tracking features on massive solar image archives.

  5. A robust active contour edge detection algorithm based on local Gaussian statistical model for oil slick remote sensing image

    NASA Astrophysics Data System (ADS)

    Jing, Yu; Wang, Yaxuan; Liu, Jianxin; Liu, Zhaoxia

    2015-08-01

    Edge detection is a crucial method for the location and quantity estimation of oil slick when oil spills on the sea. In this paper, we present a robust active contour edge detection algorithm for oil spill remote sensing images. In the proposed algorithm, we define a local Gaussian data fitting energy term with spatially varying means and variances, and this data fitting energy term is introduced into a global minimization active contour (GMAC) framework. The energy function minimization is achieved fast by a dual formulation of the weighted total variation norm. The proposed algorithm avoids the existence of local minima, does not require the definition of initial contour, and is robust to weak boundaries, high noise and severe intensity inhomogeneity exiting in oil slick remote sensing images. Furthermore, the edge detection of oil slick and the correction of intensity inhomogeneity are simultaneously achieved via the proposed algorithm. The experiment results have shown that a superior performance of proposed algorithm over state-of-the-art edge detection algorithms. In addition, the proposed algorithm can also deal with the special images with the object and background of the same intensity means but different variances.

  6. Hyperspectral image segmentation using active contours

    NASA Astrophysics Data System (ADS)

    Lee, Cheolha P.; Snyder, Wesley E.

    2004-08-01

    Multispectral or hyperspectral image processing has been studied as a possible approach to automatic target recognition (ATR). Hundreds of spectral bands may provide high data redundancy, compensating the low contrast in medium wavelength infrared (MWIR) and long wavelength infrared (LWIR) images. Thus, the combination of spectral (image intensity) and spatial (geometric feature) information analysis could produce a substantial improvement. Active contours provide segments with continuous boundaries, while edge detectors based on local filtering often provide discontinuous boundaries. The segmentation by active contours depends on geometric feature of the object as well as image intensity. However, the application of active contours to multispectral images has been limited to the cases of simply textured images with low number of frames. This paper presents a supervised active contour model, which is applicable to vector-valued images with non-homogeneous regions and high number of frames. In the training stage, histogram models of target classes are estimated from sample vector-pixels. In the test stage, contours are evolved based on two different metrics: the histogram models of the corresponding segments and the histogram models estimated from sample target vector-pixels. The proposed segmentation method integrates segmentation and model-based pattern matching using supervised segmentation and multi-phase active contour model, while traditional methods apply pattern matching only after the segmentation. The proposed algorithm is implemented with both synthetic and real multispectral images, and shows desirable segmentation and classification results even in images with non-homogeneous regions.

  7. Computer-aided measurement of liver volumes in CT by means of geodesic active contour segmentation coupled with level-set algorithms

    SciTech Connect

    Suzuki, Kenji; Kohlbrenner, Ryan; Epstein, Mark L.; Obajuluwa, Ademola M.; Xu Jianwu; Hori, Masatoshi

    2010-05-15

    Purpose: Computerized liver extraction from hepatic CT images is challenging because the liver often abuts other organs of a similar density. The purpose of this study was to develop a computer-aided measurement of liver volumes in hepatic CT. Methods: The authors developed a computerized liver extraction scheme based on geodesic active contour segmentation coupled with level-set contour evolution. First, an anisotropic diffusion filter was applied to portal-venous-phase CT images for noise reduction while preserving the liver structure, followed by a scale-specific gradient magnitude filter to enhance the liver boundaries. Then, a nonlinear grayscale converter enhanced the contrast of the liver parenchyma. By using the liver-parenchyma-enhanced image as a speed function, a fast-marching level-set algorithm generated an initial contour that roughly estimated the liver shape. A geodesic active contour segmentation algorithm coupled with level-set contour evolution refined the initial contour to define the liver boundaries more precisely. The liver volume was then calculated using these refined boundaries. Hepatic CT scans of 15 prospective liver donors were obtained under a liver transplant protocol with a multidetector CT system. The liver volumes extracted by the computerized scheme were compared to those traced manually by a radiologist, used as ''gold standard.''Results: The mean liver volume obtained with our scheme was 1504 cc, whereas the mean gold standard manual volume was 1457 cc, resulting in a mean absolute difference of 105 cc (7.2%). The computer-estimated liver volumetrics agreed excellently with the gold-standard manual volumetrics (intraclass correlation coefficient was 0.95) with no statistically significant difference (F=0.77; p(F{<=}f)=0.32). The average accuracy, sensitivity, specificity, and percent volume error were 98.4%, 91.1%, 99.1%, and 7.2%, respectively. Computerized CT liver volumetry would require substantially less completion time

  8. Prostate contours delineation using interactive directional active contours model and parametric shape prior model.

    PubMed

    Derraz, Foued; Forzy, Gérard; Delebarre, Arnaud; Taleb-Ahmed, Abdelmalik; Oussalah, Mourad; Peyrodie, Laurent; Verclytte, Sebastien

    2015-11-01

    Prostate contours delineation on Magnetic Resonance (MR) images is a challenging and important task in medical imaging with applications of guiding biopsy, surgery and therapy. While a fully automated method is highly desired for this application, it can be a very difficult task due to the structure and surrounding tissues of the prostate gland. Traditional active contours-based delineation algorithms are typically quite successful for piecewise constant images. Nevertheless, when MR images have diffuse edges or multiple similar objects (e.g. bladder close to prostate) within close proximity, such approaches have proven to be unsuccessful. In order to mitigate these problems, we proposed a new framework for bi-stage contours delineation algorithm based on directional active contours (DAC) incorporating prior knowledge of the prostate shape. We first explicitly addressed the prostate contour delineation problem based on fast globally DAC that incorporates both statistical and parametric shape prior model. In doing so, we were able to exploit the global aspects of contour delineation problem by incorporating a user feedback in contours delineation process where it is shown that only a small amount of user input can sometimes resolve ambiguous scenarios raised by DAC. In addition, once the prostate contours have been delineated, a cost functional is designed to incorporate both user feedback interaction and the parametric shape prior model. Using data from publicly available prostate MR datasets, which includes several challenging clinical datasets, we highlighted the effectiveness and the capability of the proposed algorithm. Besides, the algorithm has been compared with several state-of-the-art methods. PMID:26009857

  9. A GENERAL ALGORITHM FOR THE CONSTRUCTION OF CONTOUR PLOTS

    NASA Technical Reports Server (NTRS)

    Johnson, W.

    1994-01-01

    The graphical presentation of experimentally or theoretically generated data sets frequently involves the construction of contour plots. A general computer algorithm has been developed for the construction of contour plots. The algorithm provides for efficient and accurate contouring with a modular approach which allows flexibility in modifying the algorithm for special applications. The algorithm accepts as input data values at a set of points irregularly distributed over a plane. The algorithm is based on an interpolation scheme in which the points in the plane are connected by straight line segments to form a set of triangles. In general, the data is smoothed using a least-squares-error fit of the data to a bivariate polynomial. To construct the contours, interpolation along the edges of the triangles is performed, using the bivariable polynomial if data smoothing was performed. Once the contour points have been located, the contour may be drawn. This program is written in FORTRAN IV for batch execution and has been implemented on an IBM 360 series computer with a central memory requirement of approximately 100K of 8-bit bytes. This computer algorithm was developed in 1981.

  10. A general algorithm for the construction of contour plots

    NASA Technical Reports Server (NTRS)

    Johnson, W.; Silva, F.

    1981-01-01

    An algorithm is described that performs the task of drawing equal level contours on a plane, which requires interpolation in two dimensions based on data prescribed at points distributed irregularly over the plane. The approach is described in detail. The computer program that implements the algorithm is documented and listed.

  11. A fast contour descriptor algorithm for supernova imageclassification

    SciTech Connect

    Aragon, Cecilia R.; Aragon, David Bradburn

    2006-07-16

    We describe a fast contour descriptor algorithm and its application to a distributed supernova detection system (the Nearby Supernova Factory) that processes 600,000 candidate objects in 80 GB of image data per night. Our shape-detection algorithm reduced the number of false positives generated by the supernova search pipeline by 41% while producing no measurable impact on running time. Fourier descriptors are an established method of numerically describing the shapes of object contours, but transform-based techniques are ordinarily avoided in this type of application due to their computational cost. We devised a fast contour descriptor implementation for supernova candidates that meets the tight processing budget of the application. Using the lowest-order descriptors (F{sub 1} and F{sub -1}) and the total variance in the contour, we obtain one feature representing the eccentricity of the object and another denoting its irregularity. Because the number of Fourier terms to be calculated is fixed and small, the algorithm runs in linear time, rather than the O(n log n) time of an FFT. Constraints on object size allow further optimizations so that the total cost of producing the required contour descriptors is about 4n addition/subtraction operations, where n is the length of the contour.

  12. Multi-object geodesic active contours (MOGAC).

    PubMed

    Lucas, Blake C; Kazhdan, Michael; Taylor, Russell H

    2012-01-01

    An emerging topic is to build image segmentation systems that can segment hundreds to thousands of objects (i.e. cell segmentation\\tracking, full brain parcellation, full body segmentation, etc.). Multi-object Level Set Methods (MLSM) perform this task with the benefit of sub-pixel precision. However, current implementations of MLSM are not as computationally or memory efficient as their region growing and graph cut counterparts which lack sub-pixel precision. To address this performance gap, we present a novel parallel implementation of MLSM that leverages the sparse properties of the algorithm to minimize its memory footprint for multiple objects. The new method, Multi-Object Geodesic Active Contours (MOGAC), can represent N objects with just two functions: a label mask image and unsigned distance field. The time complexity of the algorithm is shown to be O((M (power)d)/P) for M (power)d pixels and P processing units in dimension d = {2,3}, independent of the number of objects. Results are presented for 2D and 3D image segmentation problems. PMID:23286074

  13. Generation algorithm of craniofacial structure contour in cephalometric images

    NASA Astrophysics Data System (ADS)

    Mondal, Tanmoy; Jain, Ashish; Sardana, H. K.

    2010-02-01

    Anatomical structure tracing on cephalograms is a significant way to obtain cephalometric analysis. Computerized cephalometric analysis involves both manual and automatic approaches. The manual approach is limited in accuracy and repeatability. In this paper we have attempted to develop and test a novel method for automatic localization of craniofacial structure based on the detected edges on the region of interest. According to the grey scale feature at the different region of the cephalometric images, an algorithm for obtaining tissue contour is put forward. Using edge detection with specific threshold an improved bidirectional contour tracing approach is proposed by an interactive selection of the starting edge pixels, the tracking process searches repetitively for an edge pixel at the neighborhood of previously searched edge pixel to segment images, and then craniofacial structures are obtained. The effectiveness of the algorithm is demonstrated by the preliminary experimental results obtained with the proposed method.

  14. Automated optic disk boundary detection by modified active contour model.

    PubMed

    Xu, Juan; Chutatape, Opas; Chew, Paul

    2007-03-01

    This paper presents a novel deformable-model-based algorithm for fully automated detection of optic disk boundary in fundus images. The proposed method improves and extends the original snake (deforming-only technique) in two aspects: clustering and smoothing update. The contour points are first self-separated into edge-point group or uncertain-point group by clustering after each deformation, and these contour points are then updated by different criteria based on different groups. The updating process combines both the local and global information of the contour to achieve the balance of contour stability and accuracy. The modifications make the proposed algorithm more accurate and robust to blood vessel occlusions, noises, ill-defined edges and fuzzy contour shapes. The comparative results show that the proposed method can estimate the disk boundaries of 100 test images closer to the groundtruth, as measured by mean distance to closest point (MDCP) <3 pixels, with the better success rate when compared to those obtained by gradient vector flow snake (GVF-snake) and modified active shape models (ASM). PMID:17355059

  15. Vascular active contour for vessel tree segmentation.

    PubMed

    Shang, Yanfeng; Deklerck, Rudi; Nyssen, Edgard; Markova, Aneta; de Mey, Johan; Yang, Xin; Sun, Kun

    2011-04-01

    In this paper, a novel active contour model is proposed for vessel tree segmentation. First, we introduce a region competition-based active contour model exploiting the gaussian mixture model, which mainly segments thick vessels. Second, we define a vascular vector field to evolve the active contour along its center line into the thin and weak vessels. The vector field is derived from the eigenanalysis of the Hessian matrix of the image intensity in a multiscale framework. Finally, a dual curvature strategy, which uses a vesselness measure-dependent function selecting between a minimal principal curvature and a mean curvature criterion, is added to smoothen the surface of the vessel without changing its shape. The developed model is used to extract the liver and lung vessel tree as well as the coronary artery from high-resolution volumetric computed tomography images. Comparisons are made with several classical active contour models and manual extraction. The experiments show that our model is more accurate and robust than these classical models and is, therefore, more suited for automatic vessel tree extraction. PMID:21138795

  16. Localizing Region-Based Active Contours

    PubMed Central

    Lankton, Shawn; Tannenbaum, Allen

    2009-01-01

    In this paper, we propose a natural framework that allows any region-based segmentation energy to be re-formulated in a local way. We consider local rather than global image statistics and evolve a contour based on local information. Localized contours are capable of segmenting objects with heterogeneous feature profiles that would be difficult to capture correctly using a standard global method. The presented technique is versatile enough to be used with any global region-based active contour energy and instill in it the benefits of localization. We describe this framework and demonstrate the localization of three well-known energies in order to illustrate how our framework can be applied to any energy. We then compare each localized energy to its global counterpart to show the improvements that can be achieved. Next, an in-depth study of the behaviors of these energies in response to the degree of localization is given. Finally, we show results on challenging images to illustrate the robust and accurate segmentations that are possible with this new class of active contour models. PMID:18854247

  17. Fast Contour-Tracing Algorithm Based on a Pixel-Following Method for Image Sensors

    PubMed Central

    Seo, Jonghoon; Chae, Seungho; Shim, Jinwook; Kim, Dongchul; Cheong, Cheolho; Han, Tack-Don

    2016-01-01

    Contour pixels distinguish objects from the background. Tracing and extracting contour pixels are widely used for smart/wearable image sensor devices, because these are simple and useful for detecting objects. In this paper, we present a novel contour-tracing algorithm for fast and accurate contour following. The proposed algorithm classifies the type of contour pixel, based on its local pattern. Then, it traces the next contour using the previous pixel’s type. Therefore, it can classify the type of contour pixels as a straight line, inner corner, outer corner and inner-outer corner, and it can extract pixels of a specific contour type. Moreover, it can trace contour pixels rapidly because it can determine the local minimal path using the contour case. In addition, the proposed algorithm is capable of the compressing data of contour pixels using the representative points and inner-outer corner points, and it can accurately restore the contour image from the data. To compare the performance of the proposed algorithm to that of conventional techniques, we measure their processing time and accuracy. In the experimental results, the proposed algorithm shows better performance compared to the others. Furthermore, it can provide the compressed data of contour pixels and restore them accurately, including the inner-outer corner, which cannot be restored using conventional algorithms. PMID:27005632

  18. Fast Contour-Tracing Algorithm Based on a Pixel-Following Method for Image Sensors.

    PubMed

    Seo, Jonghoon; Chae, Seungho; Shim, Jinwook; Kim, Dongchul; Cheong, Cheolho; Han, Tack-Don

    2016-01-01

    Contour pixels distinguish objects from the background. Tracing and extracting contour pixels are widely used for smart/wearable image sensor devices, because these are simple and useful for detecting objects. In this paper, we present a novel contour-tracing algorithm for fast and accurate contour following. The proposed algorithm classifies the type of contour pixel, based on its local pattern. Then, it traces the next contour using the previous pixel's type. Therefore, it can classify the type of contour pixels as a straight line, inner corner, outer corner and inner-outer corner, and it can extract pixels of a specific contour type. Moreover, it can trace contour pixels rapidly because it can determine the local minimal path using the contour case. In addition, the proposed algorithm is capable of the compressing data of contour pixels using the representative points and inner-outer corner points, and it can accurately restore the contour image from the data. To compare the performance of the proposed algorithm to that of conventional techniques, we measure their processing time and accuracy. In the experimental results, the proposed algorithm shows better performance compared to the others. Furthermore, it can provide the compressed data of contour pixels and restore them accurately, including the inner-outer corner, which cannot be restored using conventional algorithms. PMID:27005632

  19. Active contour based segmentation of resected livers in CT images

    NASA Astrophysics Data System (ADS)

    Oelmann, Simon; Oyarzun Laura, Cristina; Drechsler, Klaus; Wesarg, Stefan

    2015-03-01

    The majority of state of the art segmentation algorithms are able to give proper results in healthy organs but not in pathological ones. However, many clinical applications require an accurate segmentation of pathological organs. The determination of the target boundaries for radiotherapy or liver volumetry calculations are examples of this. Volumetry measurements are of special interest after tumor resection for follow up of liver regrow. The segmentation of resected livers presents additional challenges that were not addressed by state of the art algorithms. This paper presents a snakes based algorithm specially developed for the segmentation of resected livers. The algorithm is enhanced with a novel dynamic smoothing technique that allows the active contour to propagate with different speeds depending on the intensities visible in its neighborhood. The algorithm is evaluated in 6 clinical CT images as well as 18 artificial datasets generated from additional clinical CT images.

  20. Image Segmentation With Cage Active Contours.

    PubMed

    Garrido, Lluís; Guerrieri, Marité; Igual, Laura

    2015-12-01

    In this paper, we present a framework for image segmentation based on parametrized active contours. The evolving contour is parametrized according to a reduced set of control points that form a closed polygon and have a clear visual interpretation. The parametrization, called mean value coordinates, stems from the techniques used in computer graphics to animate virtual models. Our framework allows to easily formulate region-based energies to segment an image. In particular, we present three different local region-based energy terms: 1) the mean model; 2) the Gaussian model; 3) and the histogram model. We show the behavior of our method on synthetic and real images and compare the performance with state-of-the-art level set methods. PMID:26316128

  1. Human body contour data based activity recognition.

    PubMed

    Myagmarbayar, Nergui; Yuki, Yoshida; Imamoglu, Nevrez; Gonzalez, Jose; Otake, Mihoko; Yu, Wenwei

    2013-01-01

    This research work is aimed to develop autonomous bio-monitoring mobile robots, which are capable of tracking and measuring patients' motions, recognizing the patients' behavior based on observation data, and providing calling for medical personnel in emergency situations in home environment. The robots to be developed will bring about cost-effective, safe and easier at-home rehabilitation to most motor-function impaired patients (MIPs). In our previous research, a full framework was established towards this research goal. In this research, we aimed at improving the human activity recognition by using contour data of the tracked human subject extracted from the depth images as the signal source, instead of the lower limb joint angle data used in the previous research, which are more likely to be affected by the motion of the robot and human subjects. Several geometric parameters, such as, the ratio of height to weight of the tracked human subject, and distance (pixels) between centroid points of upper and lower parts of human body, were calculated from the contour data, and used as the features for the activity recognition. A Hidden Markov Model (HMM) is employed to classify different human activities from the features. Experimental results showed that the human activity recognition could be achieved with a high correct rate. PMID:24111015

  2. Algorithms for Accurate and Fast Plotting of Contour Surfaces in 3D Using Hexahedral Elements

    NASA Astrophysics Data System (ADS)

    Singh, Chandan; Saini, Jaswinder Singh

    2016-07-01

    In the present study, Fast and accurate algorithms for the generation of contour surfaces in 3D are described using hexahedral elements which are popular in finite element analysis. The contour surfaces are described in the form of groups of boundaries of contour segments and their interior points are derived using the contour equation. The locations of contour boundaries and the interior points on contour surfaces are as accurate as the interpolation results obtained by hexahedral elements and thus there are no discrepancies between the analysis and visualization results.

  3. Algorithms for Accurate and Fast Plotting of Contour Surfaces in 3D Using Hexahedral Elements

    NASA Astrophysics Data System (ADS)

    Singh, Chandan; Saini, Jaswinder Singh

    2016-05-01

    In the present study, Fast and accurate algorithms for the generation of contour surfaces in 3D are described using hexahedral elements which are popular in finite element analysis. The contour surfaces are described in the form of groups of boundaries of contour segments and their interior points are derived using the contour equation. The locations of contour boundaries and the interior points on contour surfaces are as accurate as the interpolation results obtained by hexahedral elements and thus there are no discrepancies between the analysis and visualization results.

  4. Application of active contours for photochromic tracer flow extraction.

    PubMed

    Androutsos, D; Trahanias, P E; Venetsanopoulos, A N

    1997-06-01

    This paper addresses the implementation of image processing and computer vision techniques to automate tracer flow extraction in images obtained by the photochromic dye technique. This task is important in modeled arterial blood flow studies. Currently, it is performed via manual application of B-spline curve fitting. However, this is a tedious and error-prone procedure and its results are nonreproducible. In the proposed approach, active contours, snakes, are employed in a new curve-fitting method for tracer flow extraction in photochromic images. An algorithm implementing snakes is introduced to automate extraction. Utilizing correlation matching, the algorithm quickly locates and localizes all flow traces in the images. The feasibility of the method for tracer flow extraction is demonstrated. Moreover, results regarding the automation algorithm are presented showing its accuracy and effectiveness. The proposed approach for tracer flow extraction has potential for real-system application. PMID:9184890

  5. Segmentation and tracking in echocardiographic sequences: active contours guided by optical flow estimates

    NASA Technical Reports Server (NTRS)

    Mikic, I.; Krucinski, S.; Thomas, J. D.

    1998-01-01

    This paper presents a method for segmentation and tracking of cardiac structures in ultrasound image sequences. The developed algorithm is based on the active contour framework. This approach requires initial placement of the contour close to the desired position in the image, usually an object outline. Best contour shape and position are then calculated, assuming that at this configuration a global energy function, associated with a contour, attains its minimum. Active contours can be used for tracking by selecting a solution from a previous frame as an initial position in a present frame. Such an approach, however, fails for large displacements of the object of interest. This paper presents a technique that incorporates the information on pixel velocities (optical flow) into the estimate of initial contour to enable tracking of fast-moving objects. The algorithm was tested on several ultrasound image sequences, each covering one complete cardiac cycle. The contour successfully tracked boundaries of mitral valve leaflets, aortic root and endocardial borders of the left ventricle. The algorithm-generated outlines were compared against manual tracings by expert physicians. The automated method resulted in contours that were within the boundaries of intraobserver variability.

  6. Prostate segmentation algorithm using dyadic wavelet transform and discrete dynamic contour

    NASA Astrophysics Data System (ADS)

    Chiu, Bernard; Freeman, George H.; Salama, M. M. A.; Fenster, Aaron

    2004-11-01

    Knowing the location and the volume of the prostate is important for ultrasound-guided prostate brachytherapy, a commonly used prostate cancer treatment method. The prostate boundary must be segmented before a dose plan can be obtained. However, manual segmentation is arduous and time consuming. This paper introduces a semi-automatic segmentation algorithm based on the dyadic wavelet transform (DWT) and the discrete dynamic contour (DDC). A spline interpolation method is used to determine the initial contour based on four user-defined initial points. The DDC model then refines the initial contour based on the approximate coefficients and the wavelet coefficients generated using the DWT. The DDC model is executed under two settings. The coefficients used in these two settings are derived using smoothing functions with different sizes. A selection rule is used to choose the best contour based on the contours produced in these two settings. The accuracy of the final contour produced by the proposed algorithm is evaluated by comparing it with the manual contour outlined by an expert observer. A total of 114 2D TRUS images taken for six different patients scheduled for brachytherapy were segmented using the proposed algorithm. The average difference between the contour segmented using the proposed algorithm and the manually outlined contour is less than 3 pixels.

  7. Prostate segmentation algorithm using dyadic wavelet transform and discrete dynamic contour.

    PubMed

    Chiu, Bernard; Freeman, George H; Salama, M M A; Fenster, Aaron

    2004-11-01

    Knowing the location and the volume of the prostate is important for ultrasound-guided prostate brachytherapy, a commonly used prostate cancer treatment method. The prostate boundary must be segmented before a dose plan can be obtained. However, manual segmentation is arduous and time consuming. This paper introduces a semi-automatic segmentation algorithm based on the dyadic wavelet transform (DWT) and the discrete dynamic contour (DDC). A spline interpolation method is used to determine the initial contour based on four user-defined initial points. The DDC model then refines the initial contour based on the approximate coefficients and the wavelet coefficients generated using the DWT. The DDC model is executed under two settings. The coefficients used in these two settings are derived using smoothing functions with different sizes. A selection rule is used to choose the best contour based on the contours produced in these two settings. The accuracy of the final contour produced by the proposed algorithm is evaluated by comparing it with the manual contour outlined by an expert observer. A total of 114 2D TRUS images taken for six different patients scheduled for brachytherapy were segmented using the proposed algorithm. The average difference between the contour segmented using the proposed algorithm and the manually outlined contour is less than 3 pixels. PMID:15584529

  8. CONTUR: A FORTRAN ALGORITHM FOR TWO-DIMENSIONAL HIGH-QUALITY CONTOURING

    EPA Science Inventory

    The contouring algorithm described allows one to produce high-quality two-dimensional contour diagrams from values of a dependent variable located on a uniform grid system (i.e., spacing of nodal points in x and y directions is constant). Computer subroutines (supplied) were deve...

  9. A contour-line color layer separation algorithm based on fuzzy clustering and region growing

    NASA Astrophysics Data System (ADS)

    Liu, Tiange; Miao, Qiguang; Xu, Pengfei; Tong, Yubing; Song, Jianfeng; Xia, Ge; Yang, Yun; Zhai, Xiaojie

    2016-03-01

    The color layers of contour-lines separated from scanned topographic map are the basis of contour-line extraction, but it is difficult to separate them well due to the color aliasing and mixed color problems. This paper will focus us on contour-line color layer separation and presents a novel approach for it based on fuzzy clustering and Single-prototype Region Growing for Contour-line Layer (SRGCL). The purpose of this paper is to provide a solution for processing scanned topographic maps on which contour-lines are abundant and densely distributed, for example, in the condition similar to hilly areas and mountainous regions, the contour-lines always occupy the largest proportion in linear features and the contour-line separation is the most difficult task. The proposed approach includes steps as follows. First step, line features are extracted from the map to reduce the interference from area features in fuzzy clustering. Second step, fuzzy clustering algorithm is employed to obtain membership matrix of pixels in the line map. Third step, based on the membership matrix, we obtain the most-similar prototype and the second-similar prototype of each pixel as the indicators of the pixel in SRGCL. The spatial relationship and the fuzzy similarity of color features are used in SRGCL to overcome the inaccurate classification of ambiguous pixels. The procedure focusing on single contour-line layer will improve the accuracy of contour-line segmentation result of SRGCL relative to general segmentation methods. We verified the algorithm on several USGS historical maps, the experimental results show that our algorithm produces contour-line color layers with good continuity and few noises, which verifies the improvement in contour-line color layer separation of our algorithm relative to two general segmentation methods.

  10. Implicit active contours for automatic brachytherapy seed segmentation in fluoroscopy

    NASA Astrophysics Data System (ADS)

    Moult, Eric; Burdette, Clif; Song, Danny; Fichtinger, Gabor; Fallavollita, Pascal

    2012-02-01

    Motivation: In prostate brachytherapy, intra-operative dosimetry would be ideal to allow for rapid evaluation of the implant quality while the patient is still in the treatment position. Such a mechanism, however, requires 3-D visualization of the currently deposited seeds relative to the prostate. Thus, accurate, robust, and fully-automatic seed segmentation is of critical importance in achieving intra-operative dosimetry. Methodology: Implanted brachytherapy seeds are segmented by utilizing a region-based implicit active contour approach. Overlapping seed clusters are then resolved using a simple yet effective declustering technique. Results: Ground-truth seed coordinates were obtained via a published segmentation technique. A total of 248 clinical C-arm images from 16 patients were used to validate the proposed algorithm resulting in a 98.4% automatic detection rate with a corresponding 2.5% false-positive rate. The overall mean centroid error between the ground-truth and automatic segmentations was measured to be 0.42 pixels, while the mean centroid error for overlapping seed clusters alone was measured to be 0.67 pixels. Conclusion: Based on clinical data evaluation and validation, robust, accurate, and fully-automatic brachytherapy seed segmentation can be achieved through the implicit active contour framework and subsequent seed declustering method.

  11. An algorithm for automatically computing the horizontal shift between homologous contours from DTMs

    NASA Astrophysics Data System (ADS)

    Reinoso, Juan Francisco

    The algorithm we present here is useful for measuring the planimetric discrepancy between two models which can be represented by contours. In cartography the paradigm of such models is represented by digital terrain models (DTMs). The measure we propose is based on an area enclosed between homologous contours (two level contours, each belonging to two different models). Our measure is similar to another used previously, although, in the previous studies, the area enclosed between homologous contours was computed manually or it was restricted to particular conditions. The innovation of our approach consists of the automation of the entire process and in the constraint elimination. The main problem to solve before computing the horizontal shift measure is how to determine the area enclosed between homologous contours. This is a problem because there is no bijective correspondence between homologous contours, and therefore the identification of the homologous contours is not a trivial task. Our approach overcomes this difficulty by closing following the limit of the DTM the open contours (the contours which cut the limit of the DTM) and classifying them by the external level. We achieve the automation assisted by the Boolean polygon operations, specifically using the symmetric difference operation. Our algorithm facilitates the computation of accuracy of a DTM by comparison with another and it is applicable in such fields as hydrology (precision estimation of the hydrological features), cartographic generalization, and civil engineering. Finally we use our measure for estimating the planimetric discrepancy between the same streams derived from different DEMs (different sources and precisions).

  12. A fast hidden line algorithm with contour option. M.S. Thesis

    NASA Technical Reports Server (NTRS)

    Thue, R. E.

    1984-01-01

    The JonesD algorithm was modified to allow the processing of N-sided elements and implemented in conjunction with a 3-D contour generation algorithm. The total hidden line and contour subsystem is implemented in the MOVIE.BYU Display package, and is compared to the subsystems already existing in the MOVIE.BYU package. The comparison reveals that the modified JonesD hidden line and contour subsystem yields substantial processing time savings, when processing moderate sized models comprised of 1000 elements or less. There are, however, some limitations to the modified JonesD subsystem.

  13. An Algorithm for Converting Contours to Elevation Grids.

    ERIC Educational Resources Information Center

    Reid-Green, Keith S.

    Some of the test questions for the National Council of Architectural Registration Boards deal with the site, including drainage, regrading, and the like. Some questions are most easily scored by examining contours, but others, such as water flow questions, are best scored from a grid in which each element is assigned its average elevation. This…

  14. Dilated contour extraction and component labeling algorithm for object vector representation

    NASA Astrophysics Data System (ADS)

    Skourikhine, Alexei N.

    2005-08-01

    Object boundary extraction from binary images is important for many applications, e.g., image vectorization, automatic interpretation of images containing segmentation results, printed and handwritten documents and drawings, maps, and AutoCAD drawings. Efficient and reliable contour extraction is also important for pattern recognition due to its impact on shape-based object characterization and recognition. The presented contour tracing and component labeling algorithm produces dilated (sub-pixel) contours associated with corresponding regions. The algorithm has the following features: (1) it always produces non-intersecting, non-degenerate contours, including the case of one-pixel wide objects; (2) it associates the outer and inner (i.e., around hole) contours with the corresponding regions during the process of contour tracing in a single pass over the image; (3) it maintains desired connectivity of object regions as specified by 8-neighbor or 4-neighbor connectivity of adjacent pixels; (4) it avoids degenerate regions in both background and foreground; (5) it allows an easy augmentation that will provide information about the containment relations among regions; (6) it has a time complexity that is dominantly linear in the number of contour points. This early component labeling (contour-region association) enables subsequent efficient object-based processing of the image information.

  15. Segmentation and Tracking of Cytoskeletal Filaments Using Open Active Contours

    PubMed Central

    Smith, Matthew B.; Li, Hongsheng; Shen, Tian; Huang, Xiaolei; Yusuf, Eddy; Vavylonis, Dimitrios

    2010-01-01

    We use open active contours to quantify cytoskeletal structures imaged by fluorescence microscopy in two and three dimensions. We developed an interactive software tool for segmentation, tracking, and visualization of individual fibers. Open active contours are parametric curves that deform to minimize the sum of an external energy derived from the image and an internal bending and stretching energy. The external energy generates (i) forces that attract the contour toward the central bright line of a filament in the image, and (ii) forces that stretch the active contour toward the ends of bright ridges. Images of simulated semiflexible polymers with known bending and torsional rigidity are analyzed to validate the method. We apply our methods to quantify the conformations and dynamics of actin in two examples: actin filaments imaged by TIRF microscopy in vitro, and actin cables in fission yeast imaged by spinning disk confocal microscopy. PMID:20814909

  16. Multiresolution active contour model applied on lung and colon images

    NASA Astrophysics Data System (ADS)

    Dehmeshki, Jamshid; Siddique, Musib; Wong, Wing; Chis Ster, Irina

    2004-05-01

    This paper deploys a wavelet based scale-space approach to extract the boundary of the object of interest in medical CT images. The classical approach of the active contour models consists of starting with an initial contour, to deform it under the action of some forces attracting the contour towards the edges by means of a set of forces. The mathematical model involves in the minimisation of an objective function called energy functional, which depends on the geometry of the contour as well as of the image characteristics. Various strategies could be used for the formulation of the energy functional and its optimisation. In this study, a wavelet based scale-space approach has been adopted. The coarsest scale is able to enlarge the capture region surrounding an object and avoids the trapping of contour into weak edges. The finer scales are used to refine the contour as close as possible to the boundary of the object. An adaptive scale coefficient for the balloon energy has been introduced. Four levels of resolution have been applied in order to get reproducibility of the contour despite poor different initialisations. The scheme has been applied to segment the regions of interest in CT lung and colon images. The result has been shown to be accurate and reproducible for the cases containing fat, holes and other small high intensity objects inside lung nodules as well as colon polyps.

  17. Welding deviation detection algorithm based on extremum of molten pool image contour

    NASA Astrophysics Data System (ADS)

    Zou, Yong; Jiang, Lipei; Li, Yunhua; Xue, Long; Huang, Junfen; Huang, Jiqiang

    2016-01-01

    The welding deviation detection is the basis of robotic tracking welding, but the on-line real-time measurement of welding deviation is still not well solved by the existing methods. There is plenty of information in the gas metal arc welding(GMAW) molten pool images that is very important for the control of welding seam tracking. The physical meaning for the curvature extremum of molten pool contour is revealed by researching the molten pool images, that is, the deviation information points of welding wire center and the molten tip center are the maxima and the local maxima of the contour curvature, and the horizontal welding deviation is the position difference of these two extremum points. A new method of weld deviation detection is presented, including the process of preprocessing molten pool images, extracting and segmenting the contours, obtaining the contour extremum points, and calculating the welding deviation, etc. Extracting the contours is the premise, segmenting the contour lines is the foundation, and obtaining the contour extremum points is the key. The contour images can be extracted with the method of discrete dyadic wavelet transform, which is divided into two sub contours including welding wire and molten tip separately. The curvature value of each point of the two sub contour lines is calculated based on the approximate curvature formula of multi-points for plane curve, and the two points of the curvature extremum are the characteristics needed for the welding deviation calculation. The results of the tests and analyses show that the maximum error of the obtained on-line welding deviation is 2 pixels(0.16 mm), and the algorithm is stable enough to meet the requirements of the pipeline in real-time control at a speed of less than 500 mm/min. The method can be applied to the on-line automatic welding deviation detection.

  18. Contour detection and completion for inpainting and segmentation based on topological gradient and fast marching algorithms.

    PubMed

    Auroux, Didier; Cohen, Laurent D; Masmoudi, Mohamed

    2011-01-01

    We combine in this paper the topological gradient, which is a powerful method for edge detection in image processing, and a variant of the minimal path method in order to find connected contours. The topological gradient provides a more global analysis of the image than the standard gradient and identifies the main edges of an image. Several image processing problems (e.g., inpainting and segmentation) require continuous contours. For this purpose, we consider the fast marching algorithm in order to find minimal paths in the topological gradient image. This coupled algorithm quickly provides accurate and connected contours. We present then two numerical applications, to image inpainting and segmentation, of this hybrid algorithm. PMID:22194734

  19. A Vessel Active Contour Model for Vascular Segmentation

    PubMed Central

    Chen, Qingli; Wang, Wei; Peng, Yu; Wang, Qingjun; Wu, Zhongke; Zhou, Mingquan

    2014-01-01

    This paper proposes a vessel active contour model based on local intensity weighting and a vessel vector field. Firstly, the energy function we define is evaluated along the evolving curve instead of all image points, and the function value at each point on the curve is based on the interior and exterior weighted means in a local neighborhood of the point, which is good for dealing with the intensity inhomogeneity. Secondly, a vascular vector field derived from a vesselness measure is employed to guide the contour to evolve along the vessel central skeleton into thin and weak vessels. Thirdly, an automatic initialization method that makes the model converge rapidly is developed, and it avoids repeated trails in conventional local region active contour models. Finally, a speed-up strategy is implemented by labeling the steadily evolved points, and it avoids the repeated computation of these points in the subsequent iterations. Experiments using synthetic and real vessel images validate the proposed model. Comparisons with the localized active contour model, local binary fitting model, and vascular active contour model show that the proposed model is more accurate, efficient, and suitable for extraction of the vessel tree from different medical images. PMID:25101262

  20. A vessel active contour model for vascular segmentation.

    PubMed

    Tian, Yun; Chen, Qingli; Wang, Wei; Peng, Yu; Wang, Qingjun; Duan, Fuqing; Wu, Zhongke; Zhou, Mingquan

    2014-01-01

    This paper proposes a vessel active contour model based on local intensity weighting and a vessel vector field. Firstly, the energy function we define is evaluated along the evolving curve instead of all image points, and the function value at each point on the curve is based on the interior and exterior weighted means in a local neighborhood of the point, which is good for dealing with the intensity inhomogeneity. Secondly, a vascular vector field derived from a vesselness measure is employed to guide the contour to evolve along the vessel central skeleton into thin and weak vessels. Thirdly, an automatic initialization method that makes the model converge rapidly is developed, and it avoids repeated trails in conventional local region active contour models. Finally, a speed-up strategy is implemented by labeling the steadily evolved points, and it avoids the repeated computation of these points in the subsequent iterations. Experiments using synthetic and real vessel images validate the proposed model. Comparisons with the localized active contour model, local binary fitting model, and vascular active contour model show that the proposed model is more accurate, efficient, and suitable for extraction of the vessel tree from different medical images. PMID:25101262

  1. Tubular Enhanced Geodesic Active Contours for Continuum Robot Detection using 3D Ultrasound

    PubMed Central

    Ren, Hongliang; Dupont, Pierre E.

    2013-01-01

    Three dimensional ultrasound is a promising imaging modality for minimally invasive robotic surgery. As the robots are typically metallic, they interact strongly with the sound waves in ways that are not modeled by the ultrasound system’s signal processing algorithms. Consequently, they produce substantial imaging artifacts that can make image guidance difficult, even for experienced surgeons. This paper introduces a new approach for detecting curved continuum robots in 3D ultrasound images. The proposed approach combines geodesic active contours with a speed function that is based on enhancing the “tubularity” of the continuum robot. In particular, it takes advantage of the known robot diameter along its length. It also takes advantage of the fact that the robot surface facing the ultrasound probe provides the most accurate image. This method, termed Tubular Enhanced Geodesic Active Contours (TEGAC), is demonstrated through ex vivo intracardiac experiments to offer superior performance compared to conventional active contours. PMID:24231880

  2. Exploiting information geometry to improve the convergence of nonparametric active contours.

    PubMed

    Pereyra, Marcelo; Batatia, Hadj; McLaughlin, Steve

    2015-03-01

    This paper presents a fast converging Riemannian steepest descent method for nonparametric statistical active contour models, with application to image segmentation. Unlike other fast algorithms, the proposed method is general and can be applied to any statistical active contour model from the exponential family, which comprises most of the models considered in the literature. This is achieved by first identifying the intrinsic statistical manifold associated with this class of active contours, and then constructing a steepest descent on that manifold. A key contribution of this paper is to derive a general and tractable closed-form analytic expression for the manifold's Riemannian metric tensor, which allows computing discrete gradient flows efficiently. The proposed methodology is demonstrated empirically and compared with other state of the art approaches on several standard test images, a phantom positron-emission-tomography scan and a B-mode echography of in-vivo human dermis. PMID:25532177

  3. An Investigation of Implicit Active Contours for Scientific Image Segmentation

    SciTech Connect

    Weeratunga, S K; Kamath, C

    2003-10-29

    The use of partial differential equations in image processing has become an active area of research in the last few years. In particular, active contours are being used for image segmentation, either explicitly as snakes, or implicitly through the level set approach. In this paper, we consider the use of the implicit active contour approach for segmenting scientific images of pollen grains obtained using a scanning electron microscope. Our goal is to better understand the pros and cons of these techniques and to compare them with the traditional approaches such as the Canny and SUSAN edge detectors. The preliminary results of our study show that the level set method is computationally expensive and requires the setting of several different parameters. However, it results in closed contours, which may be useful in separating objects from the background in an image.

  4. Research of Active Contour Model in Aerial Images

    NASA Astrophysics Data System (ADS)

    Kun, Wang; Li, Guo

    With the development of computer and aviation technology, the aerial image is facing an important issue is how to automate, including aerial images of the automatic extraction of the target. In this paper, the issue of aerial images to study the active contour model is introduced, that is, Snake model, to achieve the target aerial image of the semi-automatic contour extraction method. Snake model used the unique characteristic of the energy minimization, carried out on the image contour extraction, to obtain a clear, consistent and accurate image contour. The model is defined through the energy minimization of the function, given in the initial position of artificial circumstances, through the iterative calculation of Snake model will eventually form the minimum energy function has been described in the outline of the target partition. The results indicate that Snake model for aerial images of the edge contour extraction, verification, concluded that the Snake-based edge detection methods could be more objectively and accurately extract the edge of the outline of aerial images.

  5. Active contours for localizing polyps in colonoscopic NBI image data

    NASA Astrophysics Data System (ADS)

    Breier, Matthias; Gross, Sebastian; Behrens, Alexander; Stehle, Thomas; Aach, Til

    2011-03-01

    Colon cancer is the third most common type of cancer in the United States of America. Every year about 140,000 people are newly diagnosed with colon cancer. Early detection is crucial for a successful therapy. The standard screening procedure is called colonoscopy. Using this endoscopic examination physicians can find colon polyps and remove them if necessary. Adenomatous colon polyps are deemed a preliminary stage of colon cancer. The removal of a polyp, though, can lead to complications like severe bleedings or colon perforation. Thus, only polyps diagnosed as adenomatous should be removed. To decide whether a polyp is adenomatous the polyp's surface structure including vascular patterns has to be inspected. Narrow-Band imaging (NBI) is a new tool to improve visibility of vascular patterns of the polyps. The first step for an automatic polyp classification system is the localization of the polyp. We investigate active contours for the localization of colon polyps in NBI image data. The shape of polyps, though roughly approximated by an elliptic form, is highly variable. Active contours offer the flexibility to adapt to polyp variation well. To avoid clustering of contour polygon points we propose the application of active rays. The quality of the results was evaluated based on manually segmented polyps as ground truth data. The results were compared to a template matching approach and to the Generalized Hough Transform. Active contours are superior to the Hough transform and perform equally well as the template matching approach.

  6. Segmentation of intensity inhomogeneous brain MR images using active contours.

    PubMed

    Akram, Farhan; Kim, Jeong Heon; Lim, Han Ul; Choi, Kwang Nam

    2014-01-01

    Segmentation of intensity inhomogeneous regions is a well-known problem in image analysis applications. This paper presents a region-based active contour method for image segmentation, which properly works in the context of intensity inhomogeneity problem. The proposed region-based active contour method embeds both region and gradient information unlike traditional methods. It contains mainly two terms, area and length, in which the area term practices a new region-based signed pressure force (SPF) function, which utilizes mean values from a certain neighborhood using the local binary fitted (LBF) energy model. In turn, the length term uses gradient information. The novelty of our method is to locally compute new SPF function, which uses local mean values and is able to detect boundaries of the homogenous regions. Finally, a truncated Gaussian kernel is used to regularize the level set function, which not only regularizes it but also removes the need of computationally expensive reinitialization. The proposed method targets the segmentation problem of intensity inhomogeneous images and reduces the time complexity among locally computed active contour methods. The experimental results show that the proposed method yields better segmentation result as well as less time complexity compared with the state-of-the-art active contour methods. PMID:25143780

  7. A 3D interactive multi-object segmentation tool using local robust statistics driven active contours.

    PubMed

    Gao, Yi; Kikinis, Ron; Bouix, Sylvain; Shenton, Martha; Tannenbaum, Allen

    2012-08-01

    Extracting anatomical and functional significant structures renders one of the important tasks for both the theoretical study of the medical image analysis, and the clinical and practical community. In the past, much work has been dedicated only to the algorithmic development. Nevertheless, for clinical end users, a well designed algorithm with an interactive software is necessary for an algorithm to be utilized in their daily work. Furthermore, the software would better be open sourced in order to be used and validated by not only the authors but also the entire community. Therefore, the contribution of the present work is twofolds: first, we propose a new robust statistics based conformal metric and the conformal area driven multiple active contour framework, to simultaneously extract multiple targets from MR and CT medical imagery in 3D. Second, an open source graphically interactive 3D segmentation tool based on the aforementioned contour evolution is implemented and is publicly available for end users on multiple platforms. In using this software for the segmentation task, the process is initiated by the user drawn strokes (seeds) in the target region in the image. Then, the local robust statistics are used to describe the object features, and such features are learned adaptively from the seeds under a non-parametric estimation scheme. Subsequently, several active contours evolve simultaneously with their interactions being motivated by the principles of action and reaction-this not only guarantees mutual exclusiveness among the contours, but also no longer relies upon the assumption that the multiple objects fill the entire image domain, which was tacitly or explicitly assumed in many previous works. In doing so, the contours interact and converge to equilibrium at the desired positions of the desired multiple objects. Furthermore, with the aim of not only validating the algorithm and the software, but also demonstrating how the tool is to be used, we provide

  8. Multiple LREK active contours for knee meniscus ultrasound image segmentation.

    PubMed

    Faisal, Amir; Ng, Siew-Cheok; Goh, Siew-Li; George, John; Supriyanto, Eko; Lai, Khin W

    2015-10-01

    Quantification of knee meniscus degeneration and displacement in an ultrasound image requires simultaneous segmentation of femoral condyle, meniscus, and tibial plateau in order to determine the area and the position of the meniscus. In this paper, we present an active contour for image segmentation that uses scalable local regional information on expandable kernel (LREK). It includes using a strategy to adapt the size of a local window in order to avoid being confined locally in a homogeneous region during the segmentation process. We also provide a multiple active contours framework called multiple LREK (MLREK) to deal with multiple object segmentation without merging and overlapping between the neighboring contours in the shared boundaries of separate regions. We compare its performance to other existing active contour models and show an improvement offered by our model. We then investigate the choice of various parameters in the proposed framework in response to the segmentation outcome. Dice coefficient and Hausdorff distance measures over a set of real knee meniscus ultrasound images indicate a potential application of MLREK for assessment of knee meniscus degeneration and displacement. PMID:25910057

  9. Extracting contours of oval-shaped objects by Hough transform and minimal path algorithms

    NASA Astrophysics Data System (ADS)

    Tleis, Mohamed; Verbeek, Fons J.

    2014-04-01

    Circular and oval-like objects are very common in cell and micro biology. These objects need to be analyzed, and to that end, digitized images from the microscope are used so as to come to an automated analysis pipeline. It is essential to detect all the objects in an image as well as to extract the exact contour of each individual object. In this manner it becomes possible to perform measurements on these objects, i.e. shape and texture features. Our measurement objective is achieved by probing contour detection through dynamic programming. In this paper we describe a method that uses Hough transform and two minimal path algorithms to detect contours of (ovoid-like) objects. These algorithms are based on an existing grey-weighted distance transform and a new algorithm to extract the circular shortest path in an image. The methods are tested on an artificial dataset of a 1000 images, with an F1-score of 0.972. In a case study with yeast cells, contours from our methods were compared with another solution using Pratt's figure of merit. Results indicate that our methods were more precise based on a comparison with a ground-truth dataset. As far as yeast cells are concerned, the segmentation and measurement results enable, in future work, to retrieve information from different developmental stages of the cell using complex features.

  10. Identification of the breast boundary in mammograms using active contour models.

    PubMed

    Ferrari, R J; Rangayyan, R M; Desautels, J E L; Borges, R A; Frère, A F

    2004-03-01

    A method for the identification of the breast boundary in mammograms is presented. The method can be used in the preprocessing stage of a system for computer-aided diagnosis (CAD) of breast cancer and also in the reduction of image file size in picture archiving and communication system applications. The method started with modification of the contrast of the original image. A binarisation procedure was then applied to the image, and the chain-code algorithm was used to find an approximate breast contour. Finally, the identification of the true breast boundary was performed by using the approximate contour as the input to an active contour model algorithm specially tailored for this purpose. After demarcation of the breast boundary, all artifacts outside the breast region were eliminated. The method was applied to 84 medio-lateral oblique mammograms from the Mini-MIAS database. Evaluation of the detected breast boundary was performed based upon the percentage of false-positive and false-negative pixels determined by a quantitative comparison between the contours identified by a radiologist and those identified by the proposed method. The average false positive and false negative rates were 0.41% and 0.58%, respectively. The two radiologists who evaluated the results considered the segmentation results to be acceptable for CAD purposes. PMID:15125150

  11. SEGMENTATION OF ELASTOGRAPHIC IMAGES USING A COARSE-TO-FINE ACTIVE CONTOUR MODEL

    PubMed Central

    Liu, Wu; Zagzebski, James A.; Varghese, Tomy; Dyer, Charles R.; Techavipoo, Udomchai; Hall, Timothy J.

    2006-01-01

    Delineation of radiofrequency-ablation-induced coagulation (thermal lesion) boundaries is an important clinical problem that is not well addressed by conventional imaging modalities. Elastography, which produces images of the local strain after small, externally applied compressions, can be used for visualization of thermal coagulations. This paper presents an automated segmentation approach for thermal coagulations on 3-D elastographic data to obtain both area and volume information rapidly. The approach consists of a coarse-to-fine method for active contour initialization and a gradient vector flow, active contour model for deformable contour optimization with the help of prior knowledge of the geometry of general thermal coagulations. The performance of the algorithm has been shown to be comparable to manual delineation of coagulations on elastograms by medical physicists (r = 0.99 for volumes of 36 radiofrequency-induced coagulations). Furthermore, the automatic algorithm applied to elastograms yielded results that agreed with manual delineation of coagulations on pathology images (r = 0.96 for the same 36 lesions). This algorithm has also been successfully applied on in vivo elastograms. PMID:16530098

  12. Actin filament tracking based on particle filters and stretching open active contour models.

    PubMed

    Li, Hongsheng; Shen, Tian; Vavylonis, Dimitrios; Huang, Xiaolei

    2009-01-01

    We introduce a novel algorithm for actin filament tracking and elongation measurement. Particle Filters (PF) and Stretching Open Active Contours (SOAC) work cooperatively to simplify the modeling of PF in a one-dimensional state space while naturally integrating filament body constraints to tip estimation. Our algorithm reduces the PF state spaces to one-dimensional spaces by tracking filament bodies using SOAC and probabilistically estimating tip locations along the curve length of SOACs. Experimental evaluation on TIRFM image sequences with very low SNRs demonstrates the accuracy and robustness of this approach. PMID:20426170

  13. Liver segmentation with new supervised method to create initial curve for active contour.

    PubMed

    Zareei, Abouzar; Karimi, Abbas

    2016-08-01

    The liver performs a critical task in the human body; therefore, detecting liver diseases and preparing a robust plan for treating them are both crucial. Liver diseases kill nearly 25,000 Americans every year. A variety of image segmentation methods are available to determine the liver's position and to detect possible liver tumors. Among these is the Active Contour Model (ACM), a framework which has proven very sensitive to initial contour delineation and control parameters. In the proposed method based on image energy, we attempted to obtain an initial segmentation close to the liver's boundary, and then implemented an ACM to improve the initial segmentation. The ACM used in this work incorporates gradient vector flow (GVF) and balloon energy in order to overcome ACM limitations, such as local minima entrapment and initial contour dependency. Additionally, in order to adjust active contour control parameters, we applied a genetic algorithm to produce a proper parameter set close to the optimal solution. The pre-processing method has a better ability to segment the liver tissue during a short time with respect to other mentioned methods in this paper. The proposed method was performed using Sliver CT image datasets. The results show high accuracy, precision, sensitivity, specificity and low overlap error, MSD and runtime with few ACM iterations. PMID:27286186

  14. Efficient thermal image segmentation through integration of nonlinear enhancement with unsupervised active contour model

    NASA Astrophysics Data System (ADS)

    Albalooshi, Fatema A.; Krieger, Evan; Sidike, Paheding; Asari, Vijayan K.

    2015-03-01

    Thermal images are exploited in many areas of pattern recognition applications. Infrared thermal image segmentation can be used for object detection by extracting regions of abnormal temperatures. However, the lack of texture and color information, low signal-to-noise ratio, and blurring effect of thermal images make segmenting infrared heat patterns a challenging task. Furthermore, many segmentation methods that are used in visible imagery may not be suitable for segmenting thermal imagery mainly due to their dissimilar intensity distributions. Thus, a new method is proposed to improve the performance of image segmentation in thermal imagery. The proposed scheme efficiently utilizes nonlinear intensity enhancement technique and Unsupervised Active Contour Models (UACM). The nonlinear intensity enhancement improves visual quality by combining dynamic range compression and contrast enhancement, while the UACM incorporates active contour evolutional function and neural networks. The algorithm is tested on segmenting different objects in thermal images and it is observed that the nonlinear enhancement has significantly improved the segmentation performance.

  15. Automatic brain cropping enhancement using active contours initialized by a PCNN

    NASA Astrophysics Data System (ADS)

    Swathanthira Kumar, Murali Murugavel; Sullivan, John M., Jr.

    2009-02-01

    Active contours are a popular medical image segmentation strategy. However in practice, its accuracy is dependent on the initialization of the process. The PCNN (Pulse Coupled Neural Network) algorithm developed by Eckhorn to model the observed synchronization of neural assemblies in small mammals such as cats allows for segmenting regions of similar intensity but it lacks a convergence criterion. In this paper we report a novel PCNN based strategy to initialize the zero level contour for automatic brain cropping of T2 weighted MRI image volumes of Long-Evans rats. Individual 2D anatomy slices of the rat brain volume were processed by means of a PCNN and a surrogate image 'signature' was constructed for each slice. By employing a previously trained artificial neural network (ANN) an approximate PCNN iteration (binary mask) was selected. This mask was then used to initialize a region based active contour model to crop the brain region. We tested this hybrid algorithm on 30 rat brain (256*256*12) volumes and compared the results against manually cropped gold standard. The Dice and Jaccard similarity indices were used for numerical evaluation of the proposed hybrid model. The highly successful system yielded an average of 0.97 and 0.94 respectively.

  16. Locally constrained active contour: a region-based level set for ovarian cancer metastasis segmentation

    NASA Astrophysics Data System (ADS)

    Liu, Jianfei; Yao, Jianhua; Wang, Shijun; Linguraru, Marius George; Summers, Ronald M.

    2014-03-01

    Accurate segmentation of ovarian cancer metastases is clinically useful to evaluate tumor growth and determine follow-up treatment. We present a region-based level set algorithm with localization constraints to segment ovarian cancer metastases. Our approach is established on a representative region-based level set, Chan-Vese model, in which an active contour is driven by region competition. To reduce over-segmentation, we constrain the level set propagation within a narrow image band by embedding a dynamic localization function. The metastasis intensity prior is also estimated from image regions within the level set initialization. The localization function and intensity prior force the level set to stop at the desired metastasis boundaries. Our approach was validated on 19 ovarian cancer metastases with radiologist-labeled ground-truth on contrast-enhanced CT scans from 15 patients. The comparison between our algorithm and geodesic active contour indicated that the volume overlap was 75+/-10% vs. 56+/-6%, the Dice coefficient was 83+/-8% vs. 63+/-8%, and the average surface distance was 2.2+/-0.6mm vs. 4.4+/-0.9mm. Experimental results demonstrated that our algorithm outperformed traditional level set algorithms.

  17. Algorithms for contours depicting static electric fields during adverse weather conditions

    NASA Technical Reports Server (NTRS)

    Rompala, John T.

    1991-01-01

    A flexible and functional analytical tool is developed for the study of electric fields during adverse weather conditions. This tool is designed for use by members of the Atmospheric Science Group as part of their overall effort to appraise environmental conditions during these situations. It is also used to illustrate approaches open to those interested in the study of the physics of ambient electric field phenomena. Computer resources of KSC are coordinated with original software to produce contour interpretations of electric field data available from a grid of field mills spanning the region. Three model algorithms are presented and examples are given illustrating the system design, flexibility, and utility.

  18. Pupil segmentation using active contour with shape prior

    NASA Astrophysics Data System (ADS)

    Ukpai, Charles O.; Dlay, Satnam S.; Woo, Wai L.

    2015-03-01

    Iris segmentation is the process of defining the valid part of the eye image used for further processing (feature extraction, matching and decision making). Segmentation of the iris mostly starts with pupil boundary segmentation. Most pupil segmentation techniques are based on the assumption that the pupil is circular shape. In this paper, we propose a new pupil segmentation technique which combines shape, location and spatial information for accurate and efficient segmentation of the pupil. Initially, the pupil's position and radius is estimated using a statistical approach and circular Hough transform. In order to segment the irregular boundary of the pupil, an active contour model is initialized close to the estimated boundary using information from the first step and segmentation is achieved using energy minimization based active contour. Pre-processing and post-processing were carried out to remove noise and occlusions respectively. Experimental results on CASIA V1.0 and 4.0 shows that the proposed method is highly effective at segmenting irregular boundaries of the pupil.

  19. Iterative weighted average diffusion as a novel external force in the active contour model

    NASA Astrophysics Data System (ADS)

    Mirov, Ilya S.; Nakhmani, Arie

    2016-03-01

    The active contour model has good performance in boundary extraction for medical images; particularly, Gradient Vector Flow (GVF) active contour model shows good performance at concavity convergence and insensitivity to initialization, yet it is susceptible to edge leaking, deep and narrow concavities, and has some issues handling noisy images. This paper proposes a novel external force, called Iterative Weighted Average Diffusion (IWAD), which used in tandem with parametric active contours, provides superior performance in images with high values of concavity. The image gradient is first turned into an edge image, smoothed, and modified with enhanced corner detection, then the IWAD algorithm diffuses the force at a given pixel based on its 3x3 pixel neighborhood. A forgetting factor, φ, is employed to ensure that forces being spread away from the boundary of the image will attenuate. The experimental results show better behavior in high curvature regions, faster convergence, and less edge leaking than GVF when both are compared to expert manual segmentation of the images.

  20. Algorithm-development activities

    NASA Technical Reports Server (NTRS)

    Carder, Kendall L.

    1994-01-01

    The task of algorithm-development activities at USF continues. The algorithm for determining chlorophyll alpha concentration, (Chl alpha) and gelbstoff absorption coefficient for SeaWiFS and MODIS-N radiance data is our current priority.

  1. Fast Virtual Stenting with Active Contour Models in Intracranical Aneurysm

    PubMed Central

    Zhong, Jingru; Long, Yunling; Yan, Huagang; Meng, Qianqian; Zhao, Jing; Zhang, Ying; Yang, Xinjian; Li, Haiyun

    2016-01-01

    Intracranial stents are becoming increasingly a useful option in the treatment of intracranial aneurysms (IAs). Image simulation of the releasing stent configuration together with computational fluid dynamics (CFD) simulation prior to intervention will help surgeons optimize intervention scheme. This paper proposed a fast virtual stenting of IAs based on active contour model (ACM) which was able to virtually release stents within any patient-specific shaped vessel and aneurysm models built on real medical image data. In this method, an initial stent mesh was generated along the centerline of the parent artery without the need for registration between the stent contour and the vessel. Additionally, the diameter of the initial stent volumetric mesh was set to the maximum inscribed sphere diameter of the parent artery to improve the stenting accuracy and save computational cost. At last, a novel criterion for terminating virtual stent expanding that was based on the collision detection of the axis aligned bounding boxes was applied, making the stent expansion free of edge effect. The experiment results of the virtual stenting and the corresponding CFD simulations exhibited the efficacy and accuracy of the ACM based method, which are valuable to intervention scheme selection and therapy plan confirmation. PMID:26876026

  2. Convolutional virtual electric field for image segmentation using active contours.

    PubMed

    Wang, Yuanquan; Zhu, Ce; Zhang, Jiawan; Jian, Yuden

    2014-01-01

    Gradient vector flow (GVF) is an effective external force for active contours; however, it suffers from heavy computation load. The virtual electric field (VEF) model, which can be implemented in real time using fast Fourier transform (FFT), has been proposed later as a remedy for the GVF model. In this work, we present an extension of the VEF model, which is referred to as CONvolutional Virtual Electric Field, CONVEF for short. This proposed CONVEF model takes the VEF model as a convolution operation and employs a modified distance in the convolution kernel. The CONVEF model is also closely related to the vector field convolution (VFC) model. Compared with the GVF, VEF and VFC models, the CONVEF model possesses not only some desirable properties of these models, such as enlarged capture range, u-shape concavity convergence, subject contour convergence and initialization insensitivity, but also some other interesting properties such as G-shape concavity convergence, neighboring objects separation, and noise suppression and simultaneously weak edge preserving. Meanwhile, the CONVEF model can also be implemented in real-time by using FFT. Experimental results illustrate these advantages of the CONVEF model on both synthetic and natural images. PMID:25360586

  3. Contour Photography Of The Ocular Fundus: Evaluation Of An Automated Image Processing Algorithm

    NASA Astrophysics Data System (ADS)

    Shapiro, Jerrold M.; Bush, Karen S.

    1986-07-01

    A new technique for making a three dimensional map of the optic nerve head is expected to have a major impact on the way in which glaucoma is diagnosed and treated. The new technique, contour photography, allows the health of the optic nerve head to be objectively evaluated every six months during the patient's routine office visit. In contour photography, a set of parallel lines of light are projected into the patient's eye and the back of the eye is photographed using a standard camera that is available in almost all ophthalmologist's offices. The three dimensional information is encoded in the positions of the photographed lines, and is decoded by treating each stripe as the intersection of a plane of light with the fundus. At present, a trained human observer identifies the edges of the stripes. In order to decrease the data extraction time, several automated edge detection algorithms were examined for their suitability in the analysis of contour photographs, and the best was extensively evaluated using Monte Carlo simulation. The accuracy and reproducibility of the edge position estimate in images with various amounts of film grain noise were measured for many values of the edge detector parameter and of the signal parameter, its modulation, m. When normalized by the amount of film grain noise, the relationship between reproducibility and l/m was found to be linear over the range of parameters likely to be encountered in contour photography. The accuracy was found to be independent of the amount of film grain noise, and linearly related to 1/m. By estimating m for each edge, the accuracy could be treated as a correctable systematic error of the edge detection process. A sample calculation which used parameter values that are likely to be found in contour photography showed that the automated edge detection process would be expected to produce a random variation in the measurement of the depth of the optic nerve head surface whose standard deviation is 0

  4. Flux Tensor Constrained Geodesic Active Contours with Sensor Fusion for Persistent Object Tracking.

    PubMed

    Bunyak, Filiz; Palaniappan, Kannappan; Nath, Sumit Kumar; Seetharaman, Gunasekaran

    2007-08-01

    This paper makes new contributions in motion detection, object segmentation and trajectory estimation to create a successful object tracking system. A new efficient motion detection algorithm referred to as the flux tensor is used to detect moving objects in infrared video without requiring background modeling or contour extraction. The flux tensor-based motion detector when applied to infrared video is more accurate than thresholding "hot-spots", and is insensitive to shadows as well as illumination changes in the visible channel. In real world monitoring tasks fusing scene information from multiple sensors and sources is a useful core mechanism to deal with complex scenes, lighting conditions and environmental variables. The object segmentation algorithm uses level set-based geodesic active contour evolution that incorporates the fusion of visible color and infrared edge informations in a novel manner. Touching or overlapping objects are further refined during the segmentation process using an appropriate shape-based model. Multiple object tracking using correspondence graphs is extended to handle groups of objects and occlusion events by Kalman filter-based cluster trajectory analysis and watershed segmentation. The proposed object tracking algorithm was successfully tested on several difficult outdoor multispectral videos from stationary sensors and is not confounded by shadows or illumination variations. PMID:19096530

  5. Flux Tensor Constrained Geodesic Active Contours with Sensor Fusion for Persistent Object Tracking

    PubMed Central

    Bunyak, Filiz; Palaniappan, Kannappan; Nath, Sumit Kumar; Seetharaman, Gunasekaran

    2007-01-01

    This paper makes new contributions in motion detection, object segmentation and trajectory estimation to create a successful object tracking system. A new efficient motion detection algorithm referred to as the flux tensor is used to detect moving objects in infrared video without requiring background modeling or contour extraction. The flux tensor-based motion detector when applied to infrared video is more accurate than thresholding ”hot-spots”, and is insensitive to shadows as well as illumination changes in the visible channel. In real world monitoring tasks fusing scene information from multiple sensors and sources is a useful core mechanism to deal with complex scenes, lighting conditions and environmental variables. The object segmentation algorithm uses level set-based geodesic active contour evolution that incorporates the fusion of visible color and infrared edge informations in a novel manner. Touching or overlapping objects are further refined during the segmentation process using an appropriate shape-based model. Multiple object tracking using correspondence graphs is extended to handle groups of objects and occlusion events by Kalman filter-based cluster trajectory analysis and watershed segmentation. The proposed object tracking algorithm was successfully tested on several difficult outdoor multispectral videos from stationary sensors and is not confounded by shadows or illumination variations. PMID:19096530

  6. Actin Filament Tracking Based on Particle Filters and Stretching Open Active Contour Models

    PubMed Central

    Li, Hongsheng; Shen, Tian; Vavylonis, Dimitrios; Huang, Xiaolei

    2010-01-01

    We introduce a novel algorithm for actin filament tracking and elongation measurement. Particle Filters (PF) and Stretching Open Active Contours (SOAC) work cooperatively to simplify the modeling of PF in a one-dimensional state space while naturally integrating filament body constraints to tip estimation. Existing microtubule (MT) tracking methods track either MT tips or entire bodies in high-dimensional state spaces. In contrast, our algorithm reduces the PF state spaces to one-dimensional spaces by tracking filament bodies using SOAC and probabilistically estimating tip locations along the curve length of SOACs. Experimental evaluation on TIRFM image sequences with very low SNRs demonstrates the accuracy and robustness of the proposed approach. PMID:20426170

  7. Brain MRI Tumor Detection using Active Contour Model and Local Image Fitting Energy

    NASA Astrophysics Data System (ADS)

    Nabizadeh, Nooshin; John, Nigel

    2014-03-01

    Automatic abnormality detection in Magnetic Resonance Imaging (MRI) is an important issue in many diagnostic and therapeutic applications. Here an automatic brain tumor detection method is introduced that uses T1-weighted images and K. Zhang et. al.'s active contour model driven by local image fitting (LIF) energy. Local image fitting energy obtains the local image information, which enables the algorithm to segment images with intensity inhomogeneities. Advantage of this method is that the LIF energy functional has less computational complexity than the local binary fitting (LBF) energy functional; moreover, it maintains the sub-pixel accuracy and boundary regularization properties. In Zhang's algorithm, a new level set method based on Gaussian filtering is used to implement the variational formulation, which is not only vigorous to prevent the energy functional from being trapped into local minimum, but also effective in keeping the level set function regular. Experiments show that the proposed method achieves high accuracy brain tumor segmentation results.

  8. 3D Actin Network Centerline Extraction with Multiple Active Contours

    PubMed Central

    Xu, Ting; Vavylonis, Dimitrios; Huang, Xiaolei

    2013-01-01

    Fluorescence microscopy is frequently used to study two and three dimensional network structures formed by cytoskeletal polymer fibers such as actin filaments and actin cables. While these cytoskeletal structures are often dilute enough to allow imaging of individual filaments or bundles of them, quantitative analysis of these images is challenging. To facilitate quantitative, reproducible and objective analysis of the image data, we propose a semi-automated method to extract actin networks and retrieve their topology in 3D. Our method uses multiple Stretching Open Active Contours (SOACs) that are automatically initialized at image intensity ridges and then evolve along the centerlines of filaments in the network. SOACs can merge, stop at junctions, and reconfigure with others to allow smooth crossing at junctions of filaments. The proposed approach is generally applicable to images of curvilinear networks with low SNR. We demonstrate its potential by extracting the centerlines of synthetic meshwork images, actin networks in 2D Total Internal Reflection Fluorescence Microscopy images, and 3D actin cable meshworks of live fission yeast cells imaged by spinning disk confocal microscopy. Quantitative evaluation of the method using synthetic images shows that for images with SNR above 5.0, the average vertex error measured by the distance between our result and ground truth is 1 voxel, and the average Hausdorff distance is below 10 voxels. PMID:24316442

  9. 3D Filament Network Segmentation with Multiple Active Contours

    NASA Astrophysics Data System (ADS)

    Xu, Ting; Vavylonis, Dimitrios; Huang, Xiaolei

    2014-03-01

    Fluorescence microscopy is frequently used to study two and three dimensional network structures formed by cytoskeletal polymer fibers such as actin filaments and microtubules. While these cytoskeletal structures are often dilute enough to allow imaging of individual filaments or bundles of them, quantitative analysis of these images is challenging. To facilitate quantitative, reproducible and objective analysis of the image data, we developed a semi-automated method to extract actin networks and retrieve their topology in 3D. Our method uses multiple Stretching Open Active Contours (SOACs) that are automatically initialized at image intensity ridges and then evolve along the centerlines of filaments in the network. SOACs can merge, stop at junctions, and reconfigure with others to allow smooth crossing at junctions of filaments. The proposed approach is generally applicable to images of curvilinear networks with low SNR. We demonstrate its potential by extracting the centerlines of synthetic meshwork images, actin networks in 2D TIRF Microscopy images, and 3D actin cable meshworks of live fission yeast cells imaged by spinning disk confocal microscopy.

  10. Lung segmentation from HRCT using united geometric active contours

    NASA Astrophysics Data System (ADS)

    Liu, Junwei; Li, Chuanfu; Xiong, Jin; Feng, Huanqing

    2007-12-01

    Accurate lung segmentation from high resolution CT images is a challenging task due to various detail tracheal structures, missing boundary segments and complex lung anatomy. One popular method is based on gray-level threshold, however its results are usually rough. A united geometric active contours model based on level set is proposed for lung segmentation in this paper. Particularly, this method combines local boundary information and region statistical-based model synchronously: 1) Boundary term ensures the integrality of lung tissue.2) Region term makes the level set function evolve with global characteristic and independent on initial settings. A penalizing energy term is introduced into the model, which forces the level set function evolving without re-initialization. The method is found to be much more efficient in lung segmentation than other methods that are only based on boundary or region. Results are shown by 3D lung surface reconstruction, which indicates that the method will play an important role in the design of computer-aided diagnostic (CAD) system.

  11. Rapid Activation of Motor Responses by Illusory Contours

    ERIC Educational Resources Information Center

    Seydell-Greenwald, Anna; Schmidt, Thomas

    2012-01-01

    Whereas physiological studies indicate that illusory contours (ICs) are signaled in early visual areas at short latencies, behavioral studies are divided as to whether IC processing can proceed in a fast, automatic, bottom-up manner or whether it requires extensive top-down intracortical feedback or even awareness and cognition. Here, we employ a…

  12. On the Approximation of Stable and Unstable Fiber Bundles of (Non)Autonomous ODEs — A Contour Algorithm

    NASA Astrophysics Data System (ADS)

    Hüls, Thorsten

    2016-06-01

    We propose an algorithm for the approximation of stable and unstable fibers that applies to autonomous as well as to nonautonomous ODEs. The algorithm is based on computing the zero-contour of a specific operator; an idea that was introduced in [Hüls, 2006] for discrete time systems. We present precise error estimates for the resulting contour algorithm and demonstrate its efficiency by computing stable and unstable fibers for a (non)autonomous pendulum equation in two space dimensions. Our second example is the famous three-dimensional Lorenz system for which several approximations of the two-dimensional Lorenz manifold are calculated. In both examples, we observe equally well performance for autonomously and nonautonomously chosen parameters.

  13. Medical Image Segmentation Based on a Hybrid Region-Based Active Contour Model

    PubMed Central

    Liu, Tingting; Xu, Haiyong; Liu, Zhen; Zhao, Yiming; Tian, Wenzhe

    2014-01-01

    A novel hybrid region-based active contour model is presented to segment medical images with intensity inhomogeneity. The energy functional for the proposed model consists of three weighted terms: global term, local term, and regularization term. The total energy is incorporated into a level set formulation with a level set regularization term, from which a curve evolution equation is derived for energy minimization. Experiments on some synthetic and real images demonstrate that our model is more efficient compared with the localizing region-based active contours (LRBAC) method, proposed by Lankton, and more robust compared with the Chan-Vese (C-V) active contour model. PMID:25028593

  14. Evaluating geodesic active contours in microcalcifications segmentation on mammograms.

    PubMed

    Duarte, Marcelo A; Alvarenga, Andre V; Azevedo, Carolina M; Calas, Maria Julia G; Infantosi, Antonio F C; Pereira, Wagner C A

    2015-12-01

    Breast cancer is the most commonly occurring type of cancer among women, and it is the major cause of female cancer-related deaths worldwide. Its incidence is increasing in developed as well as developing countries. Efficient strategies to reduce the high death rates due to breast cancer include early detection and tumor removal in the initial stages of the disease. Clinical and mammographic examinations are considered the best methods for detecting the early signs of breast cancer; however, these techniques are highly dependent on breast characteristics, equipment quality, and physician experience. Computer-aided diagnosis (CADx) systems have been developed to improve the accuracy of mammographic diagnosis; usually such systems may involve three steps: (i) segmentation; (ii) parameter extraction and selection of the segmented lesions and (iii) lesions classification. Literature considers the first step as the most important of them, as it has a direct impact on the lesions characteristics that will be used in the further steps. In this study, the original contribution is a microcalcification segmentation method based on the geodesic active contours (GAC) technique associated with anisotropic texture filtering as well as the radiologists' knowledge. Radiologists actively participate on the final step of the method, selecting the final segmentation that allows elaborating an adequate diagnosis hypothesis with the segmented microcalcifications presented in a region of interest (ROI). The proposed method was assessed by employing 1000 ROIs extracted from images of the Digital Database for Screening Mammography (DDSM). For the selected ROIs, the rate of adequately segmented microcalcifications to establish a diagnosis hypothesis was at least 86.9%, according to the radiologists. The quantitative test, based on the area overlap measure (AOM), yielded a mean of 0.52±0.20 for the segmented images, when all 2136 segmented microcalcifications were considered. Moreover, a

  15. Brachial artery vasomotion and transducer pressure effect on measurements by active contour segmentation on ultrasound

    SciTech Connect

    Cary, Theodore W.; Sultan, Laith R.; Sehgal, Chandra M.; Reamer, Courtney B.; Mohler, Emile R.

    2014-02-15

    Purpose: To use feed-forward active contours (snakes) to track and measure brachial artery vasomotion on ultrasound images recorded in both transverse and longitudinal views; and to compare the algorithm's performance in each view. Methods: Longitudinal and transverse view ultrasound image sequences of 45 brachial arteries were segmented by feed-forward active contour (FFAC). The segmented regions were used to measure vasomotion artery diameter, cross-sectional area, and distention both as peak-to-peak diameter and as area. ECG waveforms were also simultaneously extracted frame-by-frame by thresholding a running finite-difference image between consecutive images. The arterial and ECG waveforms were compared as they traced each phase of the cardiac cycle. Results: FFAC successfully segmented arteries in longitudinal and transverse views in all 45 cases. The automated analysis took significantly less time than manual tracing, but produced superior, well-behaved arterial waveforms. Automated arterial measurements also had lower interobserver variability as measured by correlation, difference in mean values, and coefficient of variation. Although FFAC successfully segmented both the longitudinal and transverse images, transverse measurements were less variable. The cross-sectional area computed from the longitudinal images was 27% lower than the area measured from transverse images, possibly due to the compression of the artery along the image depth by transducer pressure. Conclusions: FFAC is a robust and sensitive vasomotion segmentation algorithm in both transverse and longitudinal views. Transverse imaging may offer advantages over longitudinal imaging: transverse measurements are more consistent, possibly because the method is less sensitive to variations in transducer pressure during imaging.

  16. A comparative study on the contour tracking algorithms in ultrasound tongue images with automatic re-initialization.

    PubMed

    Xu, Kele; Gábor Csapó, Tamás; Roussel, Pierre; Denby, Bruce

    2016-05-01

    The feasibility of an automatic re-initialization of contour tracking is explored by using an image similarity-based method in the ultrasound tongue sequences. To this end, the re-initialization method was incorporated into current state-of-art tongue tracking algorithms, and a quantitative comparison was made between different algorithms by computing the mean sum of distances errors. The results demonstrate that with automatic re-initialization, the tracking error can be reduced from an average of 5-6 to about 4 pixels, a result obtained by using a large number of hand-labeled frames and similarity measurements to extract the contours, which results in improved performance. PMID:27250201

  17. Reconstruction of surfaces from planar contours through contour interpolation

    NASA Astrophysics Data System (ADS)

    Sunderland, Kyle; Woo, Boyeong; Pinter, Csaba; Fichtinger, Gabor

    2015-03-01

    Segmented structures such as targets or organs at risk are typically stored as 2D contours contained on evenly spaced cross sectional images (slices). Contour interpolation algorithms are implemented in radiation oncology treatment planning software to turn 2D contours into a 3D surface, however the results differ between algorithms, causing discrepancies in analysis. Our goal was to create an accurate and consistent contour interpolation algorithm that can handle issues such as keyhole contours, rapid changes, and branching. This was primarily motivated by radiation therapy research using the open source SlicerRT extension for the 3D Slicer platform. The implemented algorithm triangulates the mesh by minimizing the length of edges spanning the contours with dynamic programming. The first step in the algorithm is removing keyholes from contours. Correspondence is then found between contour layers and branching patterns are determined. The final step is triangulating the contours and sealing the external contours. The algorithm was tested on contours segmented on computed tomography (CT) images. Some cases such as inner contours, rapid changes in contour size, and branching were handled well by the algorithm when encountered individually. There were some special cases in which the simultaneous occurrence of several of these problems in the same location could cause the algorithm to produce suboptimal mesh. An open source contour interpolation algorithm was implemented in SlicerRT for reconstructing surfaces from planar contours. The implemented algorithm was able to generate qualitatively good 3D mesh from the set of 2D contours for most tested structures.

  18. Combining contour detection algorithms for the automatic extraction of the preparation line from a dental 3D measurement

    NASA Astrophysics Data System (ADS)

    Ahlers, Volker; Weigl, Paul; Schachtzabel, Hartmut

    2005-04-01

    Due to the increasing demand for high-quality ceramic crowns and bridges, the CAD/CAM-based production of dental restorations has been a subject of intensive research during the last fifteen years. A prerequisite for the efficient processing of the 3D measurement of prepared teeth with a minimal amount of user interaction is the automatic determination of the preparation line, which defines the sealing margin between the restoration and the prepared tooth. Current dental CAD/CAM systems mostly require the interactive definition of the preparation line by the user, at least by means of giving a number of start points. Previous approaches to the automatic extraction of the preparation line rely on single contour detection algorithms. In contrast, we use a combination of different contour detection algorithms to find several independent potential preparation lines from a height profile of the measured data. The different algorithms (gradient-based, contour-based, and region-based) show their strengths and weaknesses in different clinical situations. A classifier consisting of three stages (range check, decision tree, support vector machine), which is trained by human experts with real-world data, finally decides which is the correct preparation line. In a test with 101 clinical preparations, a success rate of 92.0% has been achieved. Thus the combination of different contour detection algorithms yields a reliable method for the automatic extraction of the preparation line, which enables the setup of a turn-key dental CAD/CAM process chain with a minimal amount of interactive screen work.

  19. An efficient dichotomizing interpolation algorithm for the refinement of TIN-based terrain surface from contour maps

    NASA Astrophysics Data System (ADS)

    Li, Lin; Kuai, Xi

    2014-11-01

    Generating a triangulated irregular network (TIN) from contour maps is the most commonly used approach to build Digital Elevation Models (DEMs) for geo-databases. A well-known problem when building a TIN is that many pan slope triangles (or PSTs) may emerge from the vertices of contour lines. Those triangles should be eliminated from the TIN by adding additional terrain points when refining the local TIN. There are many methods and algorithms available for eliminating PSTs in a TIN, but their performances may not satisfy the requirements of some applications where efficiency rather than completeness is critical. This paper investigates commonly-used processes for eliminating PSTs and puts forward a new algorithm, referred to as ‘dichotomizing' interpolation algorithm, to achieve a higher efficiency than from the conventional ‘skeleton' extraction algorithm. Its better performance comes from reducing the number of the additional interpolated points to only those that are sufficient and necessary for eliminating PSTs. This goal is reached by dichotomizing PST polygons iteratively and locating additional points in the geometric centers of the polygons. This study verifies, both theoretically and experimentally, the higher efficiency of this new dichotomizing algorithm and also demonstrates its reliability for building DEMs in terms of accuracy for estimating terrain surface elevation.

  20. A Partition-Based Active Contour Model Incorporating Local Information for Image Segmentation

    PubMed Central

    Wu, Jiaji; Jiao, Licheng; Gong, Maoguo

    2014-01-01

    Active contour models are always designed on the assumption that images are approximated by regions with piecewise-constant intensities. This assumption, however, cannot be satisfied when describing intensity inhomogeneous images which frequently occur in real world images and induced considerable difficulties in image segmentation. A milder assumption that the image is statistically homogeneous within different local regions may better suit real world images. By taking local image information into consideration, an enhanced active contour model is proposed to overcome difficulties caused by intensity inhomogeneity. In addition, according to curve evolution theory, only the region near contour boundaries is supposed to be evolved in each iteration. We try to detect the regions near contour boundaries adaptively for satisfying the requirement of curve evolution theory. In the proposed method, pixels within a selected region near contour boundaries have the opportunity to be updated in each iteration, which enables the contour to be evolved gradually. Experimental results on synthetic and real world images demonstrate the advantages of the proposed model when dealing with intensity inhomogeneity images. PMID:25147868

  1. Universality in the merging dynamics of parametric active contours: a study in MRI based lung segmentation

    NASA Astrophysics Data System (ADS)

    Chattopadhyay, Amit K.; Ray, Nilanjan; Acton, Scott T.

    2005-06-01

    Measurement of lung ventilation is one of the most reliable techniques in diagnosing pulmonary diseases. The time-consuming and bias-prone traditional methods using hyperpolarized H3He and 1H magnetic resonance imageries have recently been improved by an automated technique based on 'multiple active contour evolution'. This method involves a simultaneous evolution of multiple initial conditions, called 'snakes', eventually leading to their 'merging' and is entirely independent of the shapes and sizes of snakes or other parametric details. The objective of this paper is to show, through a theoretical analysis, that the functional dynamics of merging as depicted in the active contour method has a direct analogue in statistical physics and this explains its 'universality'. We show that the multiple active contour method has an universal scaling behaviour akin to that of classical nucleation in two spatial dimensions. We prove our point by comparing the numerically evaluated exponents with an equivalent thermodynamic model.

  2. Multiple Active Contours Guided by Differential Evolution for Medical Image Segmentation

    PubMed Central

    Cruz-Aceves, I.; Avina-Cervantes, J. G.; Lopez-Hernandez, J. M.; Rostro-Gonzalez, H.; Garcia-Capulin, C. H.; Torres-Cisneros, M.; Guzman-Cabrera, R.

    2013-01-01

    This paper presents a new image segmentation method based on multiple active contours guided by differential evolution, called MACDE. The segmentation method uses differential evolution over a polar coordinate system to increase the exploration and exploitation capabilities regarding the classical active contour model. To evaluate the performance of the proposed method, a set of synthetic images with complex objects, Gaussian noise, and deep concavities is introduced. Subsequently, MACDE is applied on datasets of sequential computed tomography and magnetic resonance images which contain the human heart and the human left ventricle, respectively. Finally, to obtain a quantitative and qualitative evaluation of the medical image segmentations compared to regions outlined by experts, a set of distance and similarity metrics has been adopted. According to the experimental results, MACDE outperforms the classical active contour model and the interactive Tseng method in terms of efficiency and robustness for obtaining the optimal control points and attains a high accuracy segmentation. PMID:23983809

  3. On the Relationship between Variational Level Set-Based and SOM-Based Active Contours

    PubMed Central

    Abdelsamea, Mohammed M.; Gnecco, Giorgio; Gaber, Mohamed Medhat; Elyan, Eyad

    2015-01-01

    Most Active Contour Models (ACMs) deal with the image segmentation problem as a functional optimization problem, as they work on dividing an image into several regions by optimizing a suitable functional. Among ACMs, variational level set methods have been used to build an active contour with the aim of modeling arbitrarily complex shapes. Moreover, they can handle also topological changes of the contours. Self-Organizing Maps (SOMs) have attracted the attention of many computer vision scientists, particularly in modeling an active contour based on the idea of utilizing the prototypes (weights) of a SOM to control the evolution of the contour. SOM-based models have been proposed in general with the aim of exploiting the specific ability of SOMs to learn the edge-map information via their topology preservation property and overcoming some drawbacks of other ACMs, such as trapping into local minima of the image energy functional to be minimized in such models. In this survey, we illustrate the main concepts of variational level set-based ACMs, SOM-based ACMs, and their relationship and review in a comprehensive fashion the development of their state-of-the-art models from a machine learning perspective, with a focus on their strengths and weaknesses. PMID:25960736

  4. On the Relationship between Variational Level Set-Based and SOM-Based Active Contours.

    PubMed

    Abdelsamea, Mohammed M; Gnecco, Giorgio; Gaber, Mohamed Medhat; Elyan, Eyad

    2015-01-01

    Most Active Contour Models (ACMs) deal with the image segmentation problem as a functional optimization problem, as they work on dividing an image into several regions by optimizing a suitable functional. Among ACMs, variational level set methods have been used to build an active contour with the aim of modeling arbitrarily complex shapes. Moreover, they can handle also topological changes of the contours. Self-Organizing Maps (SOMs) have attracted the attention of many computer vision scientists, particularly in modeling an active contour based on the idea of utilizing the prototypes (weights) of a SOM to control the evolution of the contour. SOM-based models have been proposed in general with the aim of exploiting the specific ability of SOMs to learn the edge-map information via their topology preservation property and overcoming some drawbacks of other ACMs, such as trapping into local minima of the image energy functional to be minimized in such models. In this survey, we illustrate the main concepts of variational level set-based ACMs, SOM-based ACMs, and their relationship and review in a comprehensive fashion the development of their state-of-the-art models from a machine learning perspective, with a focus on their strengths and weaknesses. PMID:25960736

  5. Method for non-referential defect characterization using fractal encoding and active contours

    DOEpatents

    Gleason, Shaun S.; Sari-Sarraf, Hamed

    2007-05-15

    A method for identification of anomalous structures, such as defects, includes the steps of providing a digital image and applying fractal encoding to identify a location of at least one anomalous portion of the image. The method does not require a reference image to identify the location of the anomalous portion. The method can further include the step of initializing an active contour based on the location information obtained from the fractal encoding step and deforming an active contour to enhance the boundary delineation of the anomalous portion.

  6. Feed-forward active contour analysis for improved brachial artery reactivity testing.

    PubMed

    Pugliese, Daniel N; Sehgal, Chandra M; Sultan, Laith R; Reamer, Courtney B; Mohler, Emile R

    2016-08-01

    The object of this study was to utilize a novel feed-forward active contour (FFAC) algorithm to find a reproducible technique for analysis of brachial artery reactivity. Flow-mediated dilation (FMD) is an important marker of vascular endothelial function but has not been adopted for widespread clinical use given its technical limitations, including inter-observer variability and differences in technique across clinical sites. We developed a novel FFAC algorithm with the goal of validating a more reliable standard. Forty-six healthy volunteers underwent FMD measurement according to the standard technique. Ultrasound videos lasting 5-10 seconds each were obtained pre-cuff inflation and at minutes 1 through 5 post-cuff deflation in longitudinal and transverse views. Automated segmentation using the FFAC algorithm with initial boundary definition from three different observers was used to analyze the images to measure diameter/cross-sectional area over the cardiac cycle. The %FMD was calculated for average, minimum, and maximum diameters/areas. Using the FFAC algorithm, the population-specific coefficient of variation (CV) at end-diastole was 3.24% for transverse compared to 9.96% for longitudinal measurements; the subject-specific CV was 15.03% compared to 57.41%, respectively. For longitudinal measurements made via the conventional method, the population-specific CV was 4.77% and subject-specific CV was 117.79%. The intraclass correlation coefficient (ICC) for transverse measurements was 0.97 (95% CI: 0.95-0.98) compared to 0.90 (95% CI: 0.84-0.94) for longitudinal measurements with FFAC and 0.72 (95% CI: 0.51-0.84) for conventional measurements. In conclusion, transverse views using the novel FFAC method provide less inter-observer variability than traditional longitudinal views. Improved reproducibility may allow adoption of FMD testing in a clinical setting. The FFAC algorithm is a robust technique that should be evaluated further for its ability to replace the

  7. A validated active contour method driven by parabolic arc model for detection and segmentation of mitochondria.

    PubMed

    Tasel, Serdar F; Mumcuoglu, Erkan U; Hassanpour, Reza Z; Perkins, Guy

    2016-06-01

    Recent studies reveal that mitochondria take substantial responsibility in cellular functions that are closely related to aging diseases caused by degeneration of neurons. These studies emphasize that the membrane and crista morphology of a mitochondrion should receive attention in order to investigate the link between mitochondrial function and its physical structure. Electron microscope tomography (EMT) allows analysis of the inner structures of mitochondria by providing highly detailed visual data from large volumes. Computerized segmentation of mitochondria with minimum manual effort is essential to accelerate the study of mitochondrial structure/function relationships. In this work, we improved and extended our previous attempts to detect and segment mitochondria from transmission electron microcopy (TEM) images. A parabolic arc model was utilized to extract membrane structures. Then, curve energy based active contours were employed to obtain roughly outlined candidate mitochondrial regions. Finally, a validation process was applied to obtain the final segmentation data. 3D extension of the algorithm is also presented in this paper. Our method achieved an average F-score performance of 0.84. Average Dice Similarity Coefficient and boundary error were measured as 0.87 and 14nm respectively. PMID:26956730

  8. Comparison of segmentation using fast marching and geodesic active contours methods for bone

    NASA Astrophysics Data System (ADS)

    Bilqis, A.; Widita, R.

    2016-03-01

    Image processing is important in diagnosing diseases or damages of human organs. One of the important stages of image processing is segmentation process. Segmentation is a separation process of the image into regions of certain similar characteristics. It is used to simplify the image to make an analysis easier. The case raised in this study is image segmentation of bones. Bone's image segmentation is a way to get bone dimensions, which is needed in order to make prosthesis that is used to treat broken or cracked bones. Segmentation methods chosen in this study are fast marching and geodesic active contours. This study uses ITK (Insight Segmentation and Registration Toolkit) software. The success of the segmentation was then determined by calculating its accuracy, sensitivity, and specificity. Based on the results, the Active Contours method has slightly higher accuracy and sensitivity values than the fast marching method. As for the value of specificity, fast marching has produced three image results that have higher specificity values compared to those of geodesic active contour's. The result also indicates that both methods have succeeded in performing bone's image segmentation. Overall, geodesic active contours method is quite better than fast marching in segmenting bone images.

  9. Automatic retinal vessel segmentation based on active contours method in Doppler spectral-domain optical coherence tomography

    NASA Astrophysics Data System (ADS)

    Liu, Wenzhong; Liu, Tan; Song, Wei; Yi, Ji; Zhang, Hao F.

    2013-01-01

    We achieved fast and automatic retinal vessel segmentation by employing the active contours method in Doppler spectral-domain optical coherence tomography (SD-OCT). In a typical OCT B-scan image, we first extracted the phase variations between adjacent A-lines and removed bulk motion. Then we set the initial contour as the boundary of the whole image and iterated until all of the segmented vessel contours became stabilized. Using a typical office computer, the whole segmentation took no more than 50 s, making real-time retinal vessel segmentation possible. We tested the active contours method segmentation in both controlled phantom and in vivo rodent eye images.

  10. A contour-based approach to multisensor image registration.

    PubMed

    Li, H; Manjunath, B S; Mitra, S K

    1995-01-01

    Image registration is concerned with the establishment of correspondence between images of the same scene. One challenging problem in this area is the registration of multispectral/multisensor images. In general, such images have different gray level characteristics, and simple techniques such as those based on area correlations cannot be applied directly. On the other hand, contours representing region boundaries are preserved in most cases. The authors present two contour-based methods which use region boundaries and other strong edges as matching primitives. The first contour matching algorithm is based on the chain-code correlation and other shape similarity criteria such as invariant moments. Closed contours and the salient segments along the open contours are matched separately. This method works well for image pairs in which the contour information is well preserved, such as the optical images from Landsat and Spot satellites. For the registration of the optical images with synthetic aperture radar (SAR) images, the authors propose an elastic contour matching scheme based on the active contour model. Using the contours from the optical image as the initial condition, accurate contour locations in the SAR image are obtained by applying the active contour model. Both contour matching methods are automatic and computationally quite efficient. Experimental results with various kinds of image data have verified the robustness of the algorithms, which have outperformed manual registration in terms of root mean square error at the control points. PMID:18289982

  11. Segmentation of Uterus Using Laparoscopic Ultrasound by an Image-Based Active Contour Approach for Guiding Gynecological Diagnosis and Surgery.

    PubMed

    Gong, Xue-Hao; Lu, Jun; Liu, Jin; Deng, Ying-Yuan; Liu, Wei-Zong; Huang, Xian; Yang, Yong-Heng; Xu, Qin; Yu, Zhi-Ying

    2015-01-01

    In laparoscopic gynecologic surgery, ultrasound has been typically implemented to diagnose urological and gynecological conditions. We applied laparoscopic ultrasonography (using Esaote 7.5~10MHz laparoscopic transducer) on the retrospective analyses of 42 women subjects during laparoscopic extirpation and excision of gynecological tumors in our hospital from August 2011 to August 2013. The objective of our research is to develop robust segmentation technique for isolation and identification of the uterus from the ultrasound images, so as to assess, locate and guide in removing the lesions during laparoscopic operations. Our method enables segmentation of the uterus by the active contour algorithm. We evaluated 42 in-vivo laparoscopic images acquired from the 42 patients (age 39.1 ± 7.2 years old) and selected images pertaining to 4 cases of congenital uterine malformations and 2 cases of pelvic adhesions masses. These cases (n = 6) were used for our uterus segmentation experiments. Based on them, the active contour method was compared with the manual segmentation method by a medical expert using linear regression and the Bland-Altman analysis (used to measure the correlation and the agreement). Then, the Dice and Jaccard indices are computed for measuring the similarity of uterus segmented between computational and manual methods. Good correlation was achieved whereby 84%-92% results fall within the 95% confidence interval in the Student t-test) and we demonstrate that the proposed segmentation method of uterus using laparoscopic images is effective. PMID:26516767

  12. Segmentation of Uterus Using Laparoscopic Ultrasound by an Image-Based Active Contour Approach for Guiding Gynecological Diagnosis and Surgery

    PubMed Central

    Gong, Xue-Hao; Lu, Jun; Liu, Jin; Deng, Ying-Yuan; Liu, Wei-Zong; Huang, Xian; Yang, Yong-Heng; Xu, Qin; Yu, Zhi-Ying

    2015-01-01

    In laparoscopic gynecologic surgery, ultrasound has been typically implemented to diagnose urological and gynecological conditions. We applied laparoscopic ultrasonography (using Esaote 7.5~10MHz laparoscopic transducer) on the retrospective analyses of 42 women subjects during laparoscopic extirpation and excision of gynecological tumors in our hospital from August 2011 to August 2013. The objective of our research is to develop robust segmentation technique for isolation and identification of the uterus from the ultrasound images, so as to assess, locate and guide in removing the lesions during laparoscopic operations. Our method enables segmentation of the uterus by the active contour algorithm. We evaluated 42 in-vivo laparoscopic images acquired from the 42 patients (age 39.1 ± 7.2 years old) and selected images pertaining to 4 cases of congenital uterine malformations and 2 cases of pelvic adhesions masses. These cases (n = 6) were used for our uterus segmentation experiments. Based on them, the active contour method was compared with the manual segmentation method by a medical expert using linear regression and the Bland-Altman analysis (used to measure the correlation and the agreement). Then, the Dice and Jaccard indices are computed for measuring the similarity of uterus segmented between computational and manual methods. Good correlation was achieved whereby 84%–92% results fall within the 95% confidence interval in the Student t-test) and we demonstrate that the proposed segmentation method of uterus using laparoscopic images is effective. PMID:26516767

  13. Finding parametric representations of the cortical sulci using an active contour model.

    PubMed

    Vaillant, M; Davatzikos, C

    1997-09-01

    The cortical sulci are brain structures resembling thin convoluted ribbons embedded in three dimensions. The importance of the sulci lies primarily in their relation to the cytoarchitectonic and functional organization of the underlying cortex and in their utilization as features in non-rigid registration methods. This paper presents a methodology for extracting parametric representations of the cerebral sulcus from magnetic resonance images. The proposed methodology is based on deformable models utilizing characteristics of the cortical shape. Specifically, a parametric representation of a sulcus is determined by the motion of an active contour along the medial surface of the corresponding cortical fold. The active contour is initialized along the outer boundary of the brain and deforms toward the deep root of a sulcus under the influence of an external force field, restricting it to lie along the medial surface of the particular cortical fold. A parametric representation of the medial surface of the sulcus is obtained as the active contour traverses the sulcus. Based on the first fundamental form of this representation, the location and degree of an interruption of a sulcus can be readily quantified; based on its second fundamental form, shape properties of the sulcus can be determined. This methodology is tested on magnetic resonance images and it is applied to three medical imaging problems: quantitative morphological analysis of the central sulcus; mapping of functional activation along the primary motor cortex and non-rigid registration of brain images. PMID:9873912

  14. Computer aided weld defect delineation using statistical parametric active contours in radiographic inspection.

    PubMed

    Goumeidane, Aicha Baya; Nacereddine, Nafaa; Khamadja, Mohammed

    2015-01-01

    A perfect knowledge of a defect shape is determinant for the analysis step in automatic radiographic inspection. Image segmentation is carried out on radiographic images and extract defects indications. This paper deals with weld defect delineation in radiographic images. The proposed method is based on a new statistics-based explicit active contour. An association of local and global modeling of the image pixels intensities is used to push the model to the desired boundaries. Furthermore, other strategies are proposed to accelerate its evolution and make the convergence speed depending only on the defect size as selecting a band around the active contour curve. The experimental results are very promising, since experiments on synthetic and radiographic images show the ability of the proposed model to extract a piece-wise homogenous object from very inhomogeneous background, even in a bad quality image. PMID:26410464

  15. Soft-tissues Image Processing: Comparison of Traditional Segmentation Methods with 2D active Contour Methods

    NASA Astrophysics Data System (ADS)

    Mikulka, J.; Gescheidtova, E.; Bartusek, K.

    2012-01-01

    The paper deals with modern methods of image processing, especially image segmentation, classification and evaluation of parameters. It focuses primarily on processing medical images of soft tissues obtained by magnetic resonance tomography (MR). It is easy to describe edges of the sought objects using segmented images. The edges found can be useful for further processing of monitored object such as calculating the perimeter, surface and volume evaluation or even three-dimensional shape reconstruction. The proposed solutions can be used for the classification of healthy/unhealthy tissues in MR or other imaging. Application examples of the proposed segmentation methods are shown. Research in the area of image segmentation focuses on methods based on solving partial differential equations. This is a modern method for image processing, often called the active contour method. It is of great advantage in the segmentation of real images degraded by noise with fuzzy edges and transitions between objects. In the paper, results of the segmentation of medical images by the active contour method are compared with results of the segmentation by other existing methods. Experimental applications which demonstrate the very good properties of the active contour method are given.

  16. Segmentation of follicular regions on H&E slides using a matching filter and active contour model

    NASA Astrophysics Data System (ADS)

    Belkacem-Boussaid, Kamel; Prescott, Jeffrey; Lozanski, Gerard; Gurcan, Metin N.

    2010-03-01

    Follicular Lymphoma (FL) accounts for 20-25% of non-Hodgkin lymphomas in the United States. The first step in follicular lymphoma grading is the identification of follicles. The goal of this paper is to develop a technique to segment follicular regions in H&E stained images. The method is based on a robust active contour model, which is initialized by a seed point selected inside the follicle manually by the user. The novel aspect of this method is the introduction of a matched filter for the flattening of background in the L channel of the Lab color space. The performance of the algorithm was tested by comparing it against the manual segmentations of trained readers using the Zijbendos similarity index. The mean accuracy of the final segmentation compared to the manual ground truth was 0.71 with a standard deviation of 0.12.

  17. Intrinsic Bayesian Active Contours for Extraction of Object Boundaries in Images

    PubMed Central

    Srivastava, Anuj

    2010-01-01

    We present a framework for incorporating prior information about high-probability shapes in the process of contour extraction and object recognition in images. Here one studies shapes as elements of an infinite-dimensional, non-linear quotient space, and statistics of shapes are defined and computed intrinsically using differential geometry of this shape space. Prior models on shapes are constructed using probability distributions on tangent bundles of shape spaces. Similar to the past work on active contours, where curves are driven by vector fields based on image gradients and roughness penalties, we incorporate the prior shape knowledge in the form of vector fields on curves. Through experimental results, we demonstrate the use of prior shape models in the estimation of object boundaries, and their success in handling partial obscuration and missing data. Furthermore, we describe the use of this framework in shape-based object recognition or classification. PMID:21076692

  18. Brain extraction from cerebral MRI volume using a hybrid level set based active contour neighborhood model

    PubMed Central

    2013-01-01

    Background The extraction of brain tissue from cerebral MRI volume is an important pre-procedure for neuroimage analyses. The authors have developed an accurate and robust brain extraction method using a hybrid level set based active contour neighborhood model. Methods The method uses a nonlinear speed function in the hybrid level set model to eliminate boundary leakage. When using the new hybrid level set model an active contour neighborhood model is applied iteratively in the neighborhood of brain boundary. A slice by slice contour initial method is proposed to obtain the neighborhood of the brain boundary. The method was applied to the internet brain MRI data provided by the Internet Brain Segmentation Repository (IBSR). Results In testing, a mean Dice similarity coefficient of 0.95±0.02 and a mean Hausdorff distance of 12.4±4.5 were obtained when performing our method across the IBSR data set (18 × 1.5 mm scans). The results obtained using our method were very similar to those produced using manual segmentation and achieved the smallest mean Hausdorff distance on the IBSR data. Conclusions An automatic method of brain extraction from cerebral MRI volume was achieved and produced competitively accurate results. PMID:23587217

  19. A Novel Active Contour Model for MRI Brain Segmentation used in Radiotherapy Treatment Planning

    PubMed Central

    Mostaar, Ahmad; Houshyari, Mohammad; Badieyan, Saeedeh

    2016-01-01

    Introduction Brain image segmentation is one of the most important clinical tools used in radiology and radiotherapy. But accurate segmentation is a very difficult task because these images mostly contain noise, inhomogeneities, and sometimes aberrations. The purpose of this study was to introduce a novel, locally statistical active contour model (ACM) for magnetic resonance image segmentation in the presence of intense inhomogeneity with the ability to determine the position of contour and energy diagram. Methods A Gaussian distribution model with different means and variances was used for inhomogeneity, and a moving window was used to map the original image into another domain in which the intensity distributions of inhomogeneous objects were still Gaussian but were better separated. The means of the Gaussian distributions in the transformed domain can be adaptively estimated by multiplying a bias field by the original signal within the window. Then, a statistical energy function is defined for each local region. Also, to evaluate the performance of our method, experiments were conducted on MR images of the brain for segment tumors or normal tissue as visualization and energy functions. Results In the proposed method, we were able to determine the size and position of the initial contour and to count iterations to have a better segmentation. The energy function for 20 to 430 iterations was calculated. The energy function was reduced by about 5 and 7% after 70 and 430 iterations, respectively. These results showed that, with increasing iterations, the energy function decreased, but it decreased faster during the early iterations, after which it decreased slowly. Also, this method enables us to stop the segmentation based on the threshold that we define for the energy equation. Conclusion An active contour model based on the energy function is a useful tool for medical image segmentation. The proposed method combined the information about neighboring pixels that

  20. Segmentation of Bone with Region Based Active Contour Model in PD Weighted MR Images of Shoulder.

    PubMed

    Sezer, Aysun; Sezer, Hasan Basri; Albayrak, Songul

    2015-01-01

    Proton density (PD) weighted MR images present inhomogeneity problem, low signal to noise ratio (SNR) and cannot define bone borders clearly. Segmentation of PD weighted images is hampered with these properties of PD weighted images which even limit the visual inspection. The purpose of this study is to determine the effectiveness of segmentation of humeral head from axial PD MR images with active contour without edge (ACWE) model. We included 219 images from our original data set. We extended the use of speckle reducing anisotropic diffusion (SRAD) in PD MR images by estimation of standard deviation of noise (SDN) from ROI. To overcome the problem of initialization of the initial contour of these region based methods, the location of the initial contour was automatically determined with use of circular Hough transform. For comparison, signed pressure force (SPF), fuzzy C-means, and Gaussian mixture models were applied and segmentation results of all four methods were also compared with the manual segmentation results of an expert. Experimental results on our own database show promising results. This is the first study in the literature to segment normal and pathological humeral heads from PD weighted MR images. PMID:26064185

  1. Segmenting multiple overlapping objects via a hybrid active contour model incorporating shape priors: applications to digital pathology

    NASA Astrophysics Data System (ADS)

    Ali, Sahirzeeshan; Madabhushi, Anant

    2011-03-01

    Active contours and active shape models (ASM) have been widely employed in image segmentation. A major limitation of active contours, however, is in their (a) inability to resolve boundaries of intersecting objects and to (b) handle occlusion. Multiple overlapping objects are typically segmented out as a single object. On the other hand, ASMs are limited by point correspondence issues since object landmarks need to be identified across multiple objects for initial object alignment. ASMs are also are constrained in that they can usually only segment a single object in an image. In this paper, we present a novel synergistic boundary and region-based active contour model that incorporates shape priors in a level set formulation. We demonstrate an application of these synergistic active contour models using multiple level sets to segment nuclear and glandular structures on digitized histopathology images of breast and prostate biopsy specimens. Unlike previous related approaches, our model is able to resolve object overlap and separate occluded boundaries of multiple objects simultaneously. The energy functional of the active contour is comprised of three terms. The first term comprises the prior shape term, modeled on the object of interest, thereby constraining the deformation achievable by the active contour. The second term, a boundary based term detects object boundaries from image gradients. The third term drives the shape prior and the contour towards the object boundary based on region statistics. The results of qualitative and quantitative evaluation on 100 prostate and 14 breast cancer histology images for the task of detecting and segmenting nuclei, lymphocytes, and glands reveals that the model easily outperforms two state of the art segmentation schemes (Geodesic Active Contour (GAC) and Roussons shape based model) and resolves up to 92% of overlapping/occluded lymphocytes and nuclei on prostate and breast cancer histology images.

  2. Perceiving Object Shape from Specular Highlight Deformation, Boundary Contour Deformation, and Active Haptic Manipulation.

    PubMed

    Norman, J Farley; Phillips, Flip; Cheeseman, Jacob R; Thomason, Kelsey E; Ronning, Cecilia; Behari, Kriti; Kleinman, Kayla; Calloway, Autum B; Lamirande, Davora

    2016-01-01

    It is well known that motion facilitates the visual perception of solid object shape, particularly when surface texture or other identifiable features (e.g., corners) are present. Conventional models of structure-from-motion require the presence of texture or identifiable object features in order to recover 3-D structure. Is the facilitation in 3-D shape perception similar in magnitude when surface texture is absent? On any given trial in the current experiments, participants were presented with a single randomly-selected solid object (bell pepper or randomly-shaped "glaven") for 12 seconds and were required to indicate which of 12 (for bell peppers) or 8 (for glavens) simultaneously visible objects possessed the same shape. The initial single object's shape was defined either by boundary contours alone (i.e., presented as a silhouette), specular highlights alone, specular highlights combined with boundary contours, or texture. In addition, there was a haptic condition: in this condition, the participants haptically explored with both hands (but could not see) the initial single object for 12 seconds; they then performed the same shape-matching task used in the visual conditions. For both the visual and haptic conditions, motion (rotation in depth or active object manipulation) was present in half of the trials and was not present for the remaining trials. The effect of motion was quantitatively similar for all of the visual and haptic conditions-e.g., the participants' performance in Experiment 1 was 93.5 percent higher in the motion or active haptic manipulation conditions (when compared to the static conditions). The current results demonstrate that deforming specular highlights or boundary contours facilitate 3-D shape perception as much as the motion of objects that possess texture. The current results also indicate that the improvement with motion that occurs for haptics is similar in magnitude to that which occurs for vision. PMID:26863531

  3. Perceiving Object Shape from Specular Highlight Deformation, Boundary Contour Deformation, and Active Haptic Manipulation

    PubMed Central

    Cheeseman, Jacob R.; Thomason, Kelsey E.; Ronning, Cecilia; Behari, Kriti; Kleinman, Kayla; Calloway, Autum B.; Lamirande, Davora

    2016-01-01

    It is well known that motion facilitates the visual perception of solid object shape, particularly when surface texture or other identifiable features (e.g., corners) are present. Conventional models of structure-from-motion require the presence of texture or identifiable object features in order to recover 3-D structure. Is the facilitation in 3-D shape perception similar in magnitude when surface texture is absent? On any given trial in the current experiments, participants were presented with a single randomly-selected solid object (bell pepper or randomly-shaped “glaven”) for 12 seconds and were required to indicate which of 12 (for bell peppers) or 8 (for glavens) simultaneously visible objects possessed the same shape. The initial single object’s shape was defined either by boundary contours alone (i.e., presented as a silhouette), specular highlights alone, specular highlights combined with boundary contours, or texture. In addition, there was a haptic condition: in this condition, the participants haptically explored with both hands (but could not see) the initial single object for 12 seconds; they then performed the same shape-matching task used in the visual conditions. For both the visual and haptic conditions, motion (rotation in depth or active object manipulation) was present in half of the trials and was not present for the remaining trials. The effect of motion was quantitatively similar for all of the visual and haptic conditions–e.g., the participants’ performance in Experiment 1 was 93.5 percent higher in the motion or active haptic manipulation conditions (when compared to the static conditions). The current results demonstrate that deforming specular highlights or boundary contours facilitate 3-D shape perception as much as the motion of objects that possess texture. The current results also indicate that the improvement with motion that occurs for haptics is similar in magnitude to that which occurs for vision. PMID:26863531

  4. Creative Contours.

    ERIC Educational Resources Information Center

    Fashing, Edward; Appenbrink, David

    1978-01-01

    Students often have difficulty relating contour lines to the shape of a landform. This article describes the construction of a simple landform model designed to help students better understand contour lines. (MA)

  5. A new background distribution-based active contour model for three-dimensional lesion segmentation in breast DCE-MRI

    SciTech Connect

    Liu, Hui; Liu, Yiping; Qiu, Tianshuang; Zhao, Zuowei; Zhang, Lina

    2014-08-15

    Purpose: To develop and evaluate a computerized semiautomatic segmentation method for accurate extraction of three-dimensional lesions from dynamic contrast-enhanced magnetic resonance images (DCE-MRIs) of the breast. Methods: The authors propose a new background distribution-based active contour model using level set (BDACMLS) to segment lesions in breast DCE-MRIs. The method starts with manual selection of a region of interest (ROI) that contains the entire lesion in a single slice where the lesion is enhanced. Then the lesion volume from the volume data of interest, which is captured automatically, is separated. The core idea of BDACMLS is a new signed pressure function which is based solely on the intensity distribution combined with pathophysiological basis. To compare the algorithm results, two experienced radiologists delineated all lesions jointly to obtain the ground truth. In addition, results generated by other different methods based on level set (LS) are also compared with the authors’ method. Finally, the performance of the proposed method is evaluated by several region-based metrics such as the overlap ratio. Results: Forty-two studies with 46 lesions that contain 29 benign and 17 malignant lesions are evaluated. The dataset includes various typical pathologies of the breast such as invasive ductal carcinoma, ductal carcinomain situ, scar carcinoma, phyllodes tumor, breast cysts, fibroadenoma, etc. The overlap ratio for BDACMLS with respect to manual segmentation is 79.55% ± 12.60% (mean ± s.d.). Conclusions: A new active contour model method has been developed and shown to successfully segment breast DCE-MRI three-dimensional lesions. The results from this model correspond more closely to manual segmentation, solve the weak-edge-passed problem, and improve the robustness in segmenting different lesions.

  6. Automated Means of Identifying Landslide Deposits using LiDAR Data using the Contour Connection Method Algorithm

    NASA Astrophysics Data System (ADS)

    Olsen, M. J.; Leshchinsky, B. A.; Tanyu, B. F.

    2014-12-01

    Landslides are a global natural hazard, resulting in severe economic, environmental and social impacts every year. Often, landslides occur in areas of repeated slope instability, but despite these trends, significant residential developments and critical infrastructure are built in the shadow of past landslide deposits and marginally stable slopes. These hazards, despite their sometimes enormous scale and regional propensity, however, are difficult to detect on the ground, often due to vegetative cover. However, new developments in remote sensing technology, specifically Light Detection and Ranging mapping (LiDAR) are providing a new means of viewing our landscape. Airborne LiDAR, combined with a level of post-processing, enable the creation of spatial data representative of the earth beneath the vegetation, highlighting the scars of unstable slopes of the past. This tool presents a revolutionary technique to mapping landslide deposits and their associated regions of risk; yet, their inventorying is often done manually, an approach that can be tedious, time-consuming and subjective. However, the associated LiDAR bare earth data present the opportunity to use this remote sensing technology and typical landslide geometry to create an automated algorithm that can detect and inventory deposits on a landscape scale. This algorithm, called the Contour Connection Method (CCM), functions by first detecting steep gradients, often associated with the headscarp of a failed hillslope, and initiating a search, highlighting deposits downslope of the failure. Based on input of search gradients, CCM can assist in highlighting regions identified as landslides consistently on a landscape scale, capable of mapping more than 14,000 hectares rapidly (<30 minutes). CCM has shown preliminary agreement with manual landslide inventorying in Oregon's Coast Range, realizing almost 90% agreement with inventorying performed by a trained geologist. The global threat of landslides necessitates

  7. Tracking Epithelial Cell Junctions in C. elegans Embryogenesis With Active Contours Guided by SIFT Flow

    PubMed Central

    Lee, Chen-Yu; Gonçalves, Monira; Chisholm, Andrew D.; Cosman, Pamela C.

    2015-01-01

    Quantitative analysis of cell shape in live samples is an important goal in developmental biology. Automated or semiautomated segmentation and tracking of cell nuclei has been successfully implemented in several biological systems. Segmentation and tracking of cell surfaces has been more challenging. Here, we present a new approach to tracking cell junctions in the developing epidermis of C. elegans embryos. Epithelial junctions as visualized with DLG-1::GFP form lines at the subapical circumference of differentiated epidermal cells and delineate changes in epidermal cell shape and position. We develop and compare two approaches for junction segmentation. For the first method (projection approach), 3-D cell boundaries are projected into 2D for segmentation using active contours with a nonintersecting force, and subsequently tracked using scale-invariant feature transform (SIFT) flow. The resulting 2-D tracked boundaries are then back-projected into 3-D space. The second method (volumetric approach) uses a 3-D extended version of active contours guided by SIFT flow in 3-D space. In both methods, cell junctions are manually located at the first time point and tracked in a fully automated way for the remainder of the video. Using these methods, we have generated the first quantitative description of ventral epidermal cell movements and shape changes during epidermal enclosure. PMID:24771564

  8. A Method for Lung Boundary Correction Using Split Bregman Method and Geometric Active Contour Model.

    PubMed

    Feng, Changli; Zhang, Jianxun; Liang, Rui

    2015-01-01

    In order to get the extracted lung region from CT images more accurately, a model that contains lung region extraction and edge boundary correction is proposed. Firstly, a new edge detection function is presented with the help of the classic structure tensor theory. Secondly, the initial lung mask is automatically extracted by an improved active contour model which combines the global intensity information, local intensity information, the new edge information, and an adaptive weight. It is worth noting that the objective function of the improved model is converted to a convex model, which makes the proposed model get the global minimum. Then, the central airway was excluded according to the spatial context messages and the position relationship between every segmented region and the rib. Thirdly, a mesh and the fractal theory are used to detect the boundary that surrounds the juxtapleural nodule. Finally, the geometric active contour model is employed to correct the detected boundary and reinclude juxtapleural nodules. We also evaluated the performance of the proposed segmentation and correction model by comparing with their popular counterparts. Efficient computing capability and robustness property prove that our model can correct the lung boundary reliably and reproducibly. PMID:26089976

  9. Automatic bootstrapping and tracking of object contours.

    PubMed

    Chiverton, John; Xie, Xianghua; Mirmehdi, Majid

    2012-03-01

    A new fully automatic object tracking and segmentation framework is proposed. The framework consists of a motion-based bootstrapping algorithm concurrent to a shape-based active contour. The shape-based active contour uses finite shape memory that is automatically and continuously built from both the bootstrap process and the active-contour object tracker. A scheme is proposed to ensure that the finite shape memory is continuously updated but forgets unnecessary information. Two new ways of automatically extracting shape information from image data given a region of interest are also proposed. Results demonstrate that the bootstrapping stage provides important motion and shape information to the object tracker. This information is found to be essential for good (fully automatic) initialization of the active contour. Further results also demonstrate convergence properties of the content of the finite shape memory and similar object tracking performance in comparison with an object tracker with unlimited shape memory. Tests with an active contour using a fixed-shape prior also demonstrate superior performance for the proposed bootstrapped finite-shape-memory framework and similar performance when compared with a recently proposed active contour that uses an alternative online learning model. PMID:21908256

  10. An Active Contour Model Based on Adaptive Threshold for Extraction of Cerebral Vascular Structures

    PubMed Central

    Wang, Jiaxin; Zhao, Shifeng; Liu, Zifeng; Duan, Fuqing; Pan, Yutong

    2016-01-01

    Cerebral vessel segmentation is essential and helpful for the clinical diagnosis and the related research. However, automatic segmentation of brain vessels remains challenging because of the variable vessel shape and high complex of vessel geometry. This study proposes a new active contour model (ACM) implemented by the level-set method for segmenting vessels from TOF-MRA data. The energy function of the new model, combining both region intensity and boundary information, is composed of two region terms, one boundary term and one penalty term. The global threshold representing the lower gray boundary of the target object by maximum intensity projection (MIP) is defined in the first-region term, and it is used to guide the segmentation of the thick vessels. In the second term, a dynamic intensity threshold is employed to extract the tiny vessels. The boundary term is used to drive the contours to evolve towards the boundaries with high gradients. The penalty term is used to avoid reinitialization of the level-set function. Experimental results on 10 clinical brain data sets demonstrate that our method is not only able to achieve better Dice Similarity Coefficient than the global threshold based method and localized hybrid level-set method but also able to extract whole cerebral vessel trees, including the thin vessels. PMID:27597878

  11. Cell spreading analysis with directed edge profile-guided level set active contours.

    PubMed

    Ersoy, I; Bunyak, F; Palaniappan, K; Sun, M; Forgacs, G

    2008-01-01

    Cell adhesion and spreading within the extracellular matrix (ECM) plays an important role in cell motility, cell growth and tissue organization. Measuring cell spreading dynamics enables the investigation of cell mechanosensitivity to external mechanical stimuli, such as substrate rigidity. A common approach to measure cell spreading dynamics is to take time lapse images and quantify cell size and perimeter as a function of time. In our experiments, differences in cell characteristics between different treatments are subtle and require accurate measurements of cell parameters across a large population of cells to ensure an adequate sample size for statistical hypothesis testing. This paper presents a new approach to estimate accurate cell boundaries with complex shapes by applying a modified geodesic active contour level set method that directly utilizes the halo effect typically seen in phase contrast microscopy. Contour evolution is guided by edge profiles in a perpendicular direction to ensure convergence to the correct cell boundary. The proposed approach is tested on bovine aortic endothelial cell images under different treatments, and demonstrates accurate segmentation for a wide range of cell sizes and shapes compared to manual ground truth. PMID:18979769

  12. Shoreline Mapping with Integrated HSI-DEM using Active Contour Method

    NASA Astrophysics Data System (ADS)

    Sukcharoenpong, Anuchit

    Shoreline mapping has been a critical task for federal/state agencies and coastal communities. It supports important applications such as nautical charting, coastal zone management, and legal boundary determination. Current attempts to incorporate data from hyperspectral imagery to increase the efficiency and efficacy of shoreline mapping have been limited due to the complexity in processing its data as well as its inferior spatial resolution when compared to multispectral imagery or to sensors such as LiDAR. As advancements in remote-sensing technologies increase sensor capabilities, the ability to exploit the spectral formation carried in hyperspectral images becomes more imperative. This work employs a new approach to extracting shorelines from AVIRIS hyperspectral images by combination with a LiDAR-based DEM using a multiphase active contour segmentation technique. Several techniques, such as study of object spectra and knowledge-based segmentation for initial contour generation, have been employed in order to achieve a sub-pixel level of accuracy and maintain low computational expenses. Introducing a DEM into hyperspectral image segmentation proves to be a useful tool to eliminate misclassifications and improve shoreline positional accuracy. Experimental results show that mapping shorelines from hyperspectral imagery and a DEM can be a promising approach as many further applications can be developed to exploit the rich information found in hyperspectral imagery.

  13. An Active Contour Model Based on Adaptive Threshold for Extraction of Cerebral Vascular Structures.

    PubMed

    Wang, Jiaxin; Zhao, Shifeng; Liu, Zifeng; Tian, Yun; Duan, Fuqing; Pan, Yutong

    2016-01-01

    Cerebral vessel segmentation is essential and helpful for the clinical diagnosis and the related research. However, automatic segmentation of brain vessels remains challenging because of the variable vessel shape and high complex of vessel geometry. This study proposes a new active contour model (ACM) implemented by the level-set method for segmenting vessels from TOF-MRA data. The energy function of the new model, combining both region intensity and boundary information, is composed of two region terms, one boundary term and one penalty term. The global threshold representing the lower gray boundary of the target object by maximum intensity projection (MIP) is defined in the first-region term, and it is used to guide the segmentation of the thick vessels. In the second term, a dynamic intensity threshold is employed to extract the tiny vessels. The boundary term is used to drive the contours to evolve towards the boundaries with high gradients. The penalty term is used to avoid reinitialization of the level-set function. Experimental results on 10 clinical brain data sets demonstrate that our method is not only able to achieve better Dice Similarity Coefficient than the global threshold based method and localized hybrid level-set method but also able to extract whole cerebral vessel trees, including the thin vessels. PMID:27597878

  14. A circumscribing active contour model for delineation of nuclei and membranes of megakaryocytes in bone marrow trephine biopsy images

    NASA Astrophysics Data System (ADS)

    Song, Tzu-Hsi; Sanchez, Victor; EIDaly, Hesham; Rajpoot, Nasir M.

    2015-03-01

    The assessment of megakaryocytes (MKs) in bone marrow trephine images is an important step in the classification of different subtypes of myeloproliferative neoplasms (MPNs). In general, bone marrow trephine images include several types of cells mixed together, which make it quite difficult to visually identify MKs. In order to aid hematopathologists in the identification and study of MKs, we develop an image processing framework with supervised machine learning approaches and a novel circumscribing active contour model to identify potential MKs and then to accurately delineate the corresponding nucleus and membrane. Specifically, a number of color and texture features are used in a nave Bayesian classifier and an Adaboost classifier to locate the regions with a high probability of depicting MKs. A region-based active contour is used on the candidate MKs to accurately delineate the boundaries of nucleus and membrane. The proposed circumscribing active contour model employs external forces not only based on pixel intensities, but also on the probabilities of depicting MKs as computed by the classifiers. Experimental results suggest that the machine learning approach can detect potential MKs with an accuracy of more than 75%. When our circumscribing active contour model is employed on the candidate MKs, the nucleus and membrane boundaries are segmented with an accuracy of more than 80% as measured by the Dice similarity coefficient. Compared to traditional region-based active contours, the use of additional external forces based on the probability of depicting MKs improves segmentation performance and computational time by an average 5%.

  15. Modeling pilot interaction with automated digital avionics systems: Guidance and control algorithms for contour and nap-of-the-Earth flight

    NASA Technical Reports Server (NTRS)

    Hess, Ronald A.

    1990-01-01

    A collection of technical papers are presented that cover modeling pilot interaction with automated digital avionics systems and guidance and control algorithms for contour and nap-of-the-earth flight. The titles of the papers presented are as follows: (1) Automation effects in a multiloop manual control system; (2) A qualitative model of human interaction with complex dynamic systems; (3) Generalized predictive control of dynamic systems; (4) An application of generalized predictive control to rotorcraft terrain-following flight; (5) Self-tuning generalized predictive control applied to terrain-following flight; and (6) Precise flight path control using a predictive algorithm.

  16. A Model for Diagnosing Breast Cancerous Tissue from Thermal Images Using Active Contour and Lyapunov Exponent

    PubMed Central

    GHAYOUMI ZADEH, Hossein; HADDADNIA, Javad; MONTAZERI, Alimohammad

    2016-01-01

    Background: The segmentation of cancerous areas in breast images is important for the early detection of disease. Thermal imaging has advantages, such as being non-invasive, non-radiation, passive, quick, painless, inexpensive, and non-contact. Imaging technique is the focus of this research. Methods: The proposed model in this paper is a combination of surf and corners that are very resistant. Obtained features are resistant to changes in rotation and revolution then with the help of active contours, this feature has been used for segmenting cancerous areas. Results: Comparing the obtained results from the proposed method and mammogram show that proposed method is Accurate and appropriate. Benign and malignance of segmented areas are detected by Lyapunov exponent. Values obtained include TP=91.31%, FN=8.69%, FP=7.26%. Conclusion: The proposed method can classify those abnormally segmented areas of the breast, to the Benign and malignant cancer. PMID:27398339

  17. Automated detection of lung tumors in PET/CT images using active contour filter

    NASA Astrophysics Data System (ADS)

    Teramoto, Atsushi; Adachi, Hayato; Tsujimoto, Masakazu; Fujita, Hiroshi; Takahashi, Katsuaki; Yamamuro, Osamu; Tamaki, Tsuneo; Nishio, Masami; Kobayashi, Toshiki

    2015-03-01

    In a previous study, we developed a hybrid tumor detection method that used both computed tomography (CT) and positron emission tomography (PET) images. However, similar to existing computer-aided detection (CAD) schemes, it was difficult to detect low-contrast lesions that touch to the normal organs such as the chest wall or blood vessels in the lung. In the current study, we proposed a novel lung tumor detection method that uses active contour filters to detect the nodules deemed "difficult" in previous CAD schemes. The proposed scheme detects lung tumors using both CT and PET images. As for the detection in CT images, the massive region was first enhanced using an active contour filter (ACF), which is a type of contrast enhancement filter that has a deformable kernel shape. The kernel shape involves closed curves that are connected by several nodes that move iteratively in order to enclose the massive region. The final output of ACF is the difference between the maximum pixel value on the deformable kernel, and pixel value on the center of the filter kernel. Subsequently, the PET images were binarized to detect the regions of increased uptake. The results were integrated, followed by the false positive reduction using 21 characteristic features and three support vector machines. In the experiment, we evaluated the proposed method using 100 PET/CT images. More than half of nodules missed using previous methods were accurately detected. The results indicate that our method may be useful for the detection of lung tumors using PET/CT images.

  18. Spectral embedding based active contour (SEAC): application to breast lesion segmentation on DCE-MRI

    NASA Astrophysics Data System (ADS)

    Agner, Shannon C.; Xu, Jun; Rosen, Mark; Karthigeyan, Sudha; Englander, Sarah; Madabhushi, Anant

    2011-03-01

    Spectral embedding (SE), a graph-based manifold learning method, has previously been shown to be useful in high dimensional data classification. In this work, we present a novel SE based active contour (SEAC) segmentation scheme and demonstrate its applications in lesion segmentation on breast dynamic contrast enhance magnetic resonance imaging (DCE-MRI). In this work, we employ SE on DCE-MRI on a per voxel basis to embed the high dimensional time series intensity vector into a reduced dimensional space, where the reduced embedding space is characterized by the principal eigenvectors. The orthogonal eigenvector-based data representation allows for computation of strong tensor gradients in the spectrally embedded space and also yields improved region statistics that serve as optimal stopping criteria for SEAC. We demonstrate both analytically and empirically that the tensor gradients in the spectrally embedded space are stronger than the corresponding gradients in the original grayscale intensity space. On a total of 50 breast DCE-MRI studies, SEAC yielded a mean absolute difference (MAD) of 3.2+/-2.1 pixels and mean Dice similarity coefficient (DSC) of 0.74+/-0.13 compared to manual ground truth segmentation. An active contour in conjunction with fuzzy c-means (FCM+AC), a commonly used segmentation method for breast DCE-MRI, produced a corresponding MAD of 7.2+/-7.4 pixels and mean DSC of 0.58+/-0.32. In conjunction with a set of 6 quantitative morphological features automatically extracted from the SEAC derived lesion boundary, a support vector machine (SVM) classifier yielded an area under the curve (AUC) of 0.73, for discriminating between 10 benign and 30 malignant lesions; the corresponding SVM classifier with the FCM+AC derived morphological features yielded an AUC of 0.65.

  19. Stress inversion of heterogeneous fault-slip data with unknown slip sense: An objective function algorithm contouring method

    NASA Astrophysics Data System (ADS)

    Hansen, John-Are; Bergh, Steffen G.; Osmundsen, Per Terje; Redfield, Tim F.

    2015-01-01

    We propose a new method for stress inversion and separation of principal stress states from heterogeneous fault-slip data. The method is semi-automatic, and is based on the moment method of stress inversion (Fry 1999) in combination with the objective function algorithm (OFA) for stress separation (Shan et al 2003). In the presented routine we randomly partition the heterogeneous fault-slip dataset into subsets ranging between one and six. The number of subsets K represents the number of possible mixed stress states in the fault-slip dataset. For each partition number K, we run the OFA 1000 times. Following this we plot and contour the principal stress axes, corresponding to the minimum value of the objective function for each run, in a stereonet. By evaluating how solution clusters of principal stress axes change with increasing number of subsets K, we are able to determine the number of mixed stress states and their optimal solutions for heterogeneous fault-slip datasets. While the numbers of subsets are underestimated, solution-clusters of principal stress axes represent average stress states. However, once the correct number of subsets is reached, solution clusters align with the slip-generating principal stress axes. The solution clusters then become stable, and overestimating the number of subsets does not significantly alter their orientation. The partition number K when stability is obtained thus determines the number of mixed stress states in the heterogeneous dataset, while the corresponding highest density solution clusters give the best estimate of the slip-generating principal stress axes and corresponding stress shape ratios. The inversion routine is tested and confirmed using synthetic data and fault-slip data from the Gullkista fault in Northern Norway. Because the stress calculation is based on the moment method, the inversion routine is insensitive to the correct assessment of slip sense, and only requires the slip vector and orientation of the

  20. Automatic corpus callosum segmentation using a deformable active Fourier contour model

    NASA Astrophysics Data System (ADS)

    Vachet, Clement; Yvernault, Benjamin; Bhatt, Kshamta; Smith, Rachel G.; Gerig, Guido; Cody Hazlett, Heather; Styner, Martin

    2012-03-01

    The corpus callosum (CC) is a structure of interest in many neuroimaging studies of neuro-developmental pathology such as autism. It plays an integral role in relaying sensory, motor and cognitive information from homologous regions in both hemispheres. We have developed a framework that allows automatic segmentation of the corpus callosum and its lobar subdivisions. Our approach employs constrained elastic deformation of flexible Fourier contour model, and is an extension of Szekely's 2D Fourier descriptor based Active Shape Model. The shape and appearance model, derived from a large mixed population of 150+ subjects, is described with complex Fourier descriptors in a principal component shape space. Using MNI space aligned T1w MRI data, the CC segmentation is initialized on the mid-sagittal plane using the tissue segmentation. A multi-step optimization strategy, with two constrained steps and a final unconstrained step, is then applied. If needed, interactive segmentation can be performed via contour repulsion points. Lobar connectivity based parcellation of the corpus callosum can finally be computed via the use of a probabilistic CC subdivision model. Our analysis framework has been integrated in an open-source, end-to-end application called CCSeg both with a command line and Qt-based graphical user interface (available on NITRC). A study has been performed to quantify the reliability of the semi-automatic segmentation on a small pediatric dataset. Using 5 subjects randomly segmented 3 times by two experts, the intra-class correlation coefficient showed a superb reliability (0.99). CCSeg is currently applied to a large longitudinal pediatric study of brain development in autism.

  1. Constraint factor graph cut–based active contour method for automated cellular image segmentation in RNAi screening

    PubMed Central

    CHEN, C.; LI, H.; ZHOU, X.; WONG, S. T. C.

    2010-01-01

    Summary Image-based, high throughput genome-wide RNA interference (RNAi) experiments are increasingly carried out to facilitate the understanding of gene functions in intricate biological processes. Automated screening of such experiments generates a large number of images with great variations in image quality, which makes manual analysis unreasonably time-consuming. Therefore, effective techniques for automatic image analysis are urgently needed, in which segmentation is one of the most important steps. This paper proposes a fully automatic method for cells segmentation in genome-wide RNAi screening images. The method consists of two steps: nuclei and cytoplasm segmentation. Nuclei are extracted and labelled to initialize cytoplasm segmentation. Since the quality of RNAi image is rather poor, a novel scale-adaptive steerable filter is designed to enhance the image in order to extract long and thin protrusions on the spiky cells. Then, constraint factor GCBAC method and morphological algorithms are combined to be an integrated method to segment tight clustered cells. Compared with the results obtained by using seeded watershed and the ground truth, that is, manual labelling results by experts in RNAi screening data, our method achieves higher accuracy. Compared with active contour methods, our method consumes much less time. The positive results indicate that the proposed method can be applied in automatic image analysis of multi-channel image screening data. PMID:18445146

  2. Myocardial Iron Loading Assessment by Automatic Left Ventricle Segmentation with Morphological Operations and Geodesic Active Contour on T2* images

    PubMed Central

    Luo, Yun-gang; Ko, Jacky KL; Shi, Lin; Guan, Yuefeng; Li, Linong; Qin, Jing; Heng, Pheng-Ann; Chu, Winnie CW; Wang, Defeng

    2015-01-01

    Myocardial iron loading thalassemia patients could be identified using T2* magnetic resonance images (MRI). To quantitatively assess cardiac iron loading, we proposed an effective algorithm to segment aligned free induction decay sequential myocardium images based on morphological operations and geodesic active contour (GAC). Nine patients with thalassemia major were recruited (10 male and 16 female) to undergo a thoracic MRI scan in the short axis view. Free induction decay images were registered for T2* mapping. The GAC were utilized to segment aligned MR images with a robust initialization. Segmented myocardium regions were divided into sectors for a region-based quantification of cardiac iron loading. Our proposed automatic segmentation approach achieve a true positive rate at 84.6% and false positive rate at 53.8%. The area difference between manual and automatic segmentation was 25.5% after 1000 iterations. Results from T2* analysis indicated that regions with intensity lower than 20 ms were suffered from heavy iron loading in thalassemia major patients. The proposed method benefited from abundant edge information of the free induction decay sequential MRI. Experiment results demonstrated that the proposed method is feasible in myocardium segmentation and was clinically applicable to measure myocardium iron loading. PMID:26215336

  3. Myocardial Iron Loading Assessment by Automatic Left Ventricle Segmentation with Morphological Operations and Geodesic Active Contour on T2* images

    NASA Astrophysics Data System (ADS)

    Luo, Yun-Gang; Ko, Jacky Kl; Shi, Lin; Guan, Yuefeng; Li, Linong; Qin, Jing; Heng, Pheng-Ann; Chu, Winnie Cw; Wang, Defeng

    2015-07-01

    Myocardial iron loading thalassemia patients could be identified using T2* magnetic resonance images (MRI). To quantitatively assess cardiac iron loading, we proposed an effective algorithm to segment aligned free induction decay sequential myocardium images based on morphological operations and geodesic active contour (GAC). Nine patients with thalassemia major were recruited (10 male and 16 female) to undergo a thoracic MRI scan in the short axis view. Free induction decay images were registered for T2* mapping. The GAC were utilized to segment aligned MR images with a robust initialization. Segmented myocardium regions were divided into sectors for a region-based quantification of cardiac iron loading. Our proposed automatic segmentation approach achieve a true positive rate at 84.6% and false positive rate at 53.8%. The area difference between manual and automatic segmentation was 25.5% after 1000 iterations. Results from T2* analysis indicated that regions with intensity lower than 20 ms were suffered from heavy iron loading in thalassemia major patients. The proposed method benefited from abundant edge information of the free induction decay sequential MRI. Experiment results demonstrated that the proposed method is feasible in myocardium segmentation and was clinically applicable to measure myocardium iron loading.

  4. Contour complexity and contour detection

    PubMed Central

    Wilder, John; Feldman, Jacob; Singh, Manish

    2015-01-01

    It is well-known that “smooth” chains of oriented elements—contours—are more easily detected amid background noise than more undulating (i.e., “less smooth”) chains. Here, we develop a Bayesian framework for contour detection and show that it predicts that contour detection performance should decrease with the contour's complexity, quantified as the description length (DL; i.e., the negative logarithm of probability integrated along the contour). We tested this prediction in two experiments in which subjects were asked to detect simple open contours amid pixel noise. In Experiment 1, we demonstrate a consistent decline in performance with increasingly complex contours, as predicted by the Bayesian model. In Experiment 2, we confirmed that this effect is due to integrated complexity along the contour, and does not seem to depend on local stretches of linear structure. The results corroborate the probabilistic model of contours, and show how contour detection can be understood as a special case of a more general process—the identification of organized patterns in the environment. PMID:26024453

  5. EXTRACTION AND ANALYSIS OF ACTIN NETWORKS BASED ON OPEN ACTIVE CONTOUR MODELS

    PubMed Central

    Xu, Ting; Li, Hongsheng; Shen, Tian; Ojkic, Nikola; Vavylonis, Dimitrios; Huang, Xiaolei

    2011-01-01

    Network structures formed by actin filaments are present in many kinds of fluorescence microscopy images. In order to quantify the conformations and dynamics of such actin filaments, we propose a fully automated method to extract actin networks from images and analyze network topology. The method handles well intersecting filaments and, to some extent, overlapping filaments. First we automatically initialize a large number of Stretching Open Active Contours (SOACs) from ridge points detected by searching for plus-to-minus sign changes in the gradient map of the image. These initial SOACs then elongate simultaneously along the bright center-lines of filaments by minimizing an energy function. During their evolution, they may merge or stop growing, thus forming a network that represents the topology of the filament ensemble. We further detect junction points in the network and break the SOACs at junctions to obtain “SOAC segments”. These segments are then re-grouped using a graph-cut spectral clustering method to represent the configuration of actin filaments. The proposed approach is generally applicable to extracting intersecting curvilinear structures in noisy images. We demonstrate its potential using two kinds of data: (1) actin filaments imaged by Total Internal Reflection Fluorescence Microscopy (TIRFM) in vitro; (2) actin cytoskeleton networks in fission yeast imaged by spinning disk confocal microscopy. PMID:21822463

  6. EXTRACTION AND ANALYSIS OF ACTIN NETWORKS BASED ON OPEN ACTIVE CONTOUR MODELS.

    PubMed

    Xu, Ting; Li, Hongsheng; Shen, Tian; Ojkic, Nikola; Vavylonis, Dimitrios; Huang, Xiaolei

    2011-03-30

    Network structures formed by actin filaments are present in many kinds of fluorescence microscopy images. In order to quantify the conformations and dynamics of such actin filaments, we propose a fully automated method to extract actin networks from images and analyze network topology. The method handles well intersecting filaments and, to some extent, overlapping filaments. First we automatically initialize a large number of Stretching Open Active Contours (SOACs) from ridge points detected by searching for plus-to-minus sign changes in the gradient map of the image. These initial SOACs then elongate simultaneously along the bright center-lines of filaments by minimizing an energy function. During their evolution, they may merge or stop growing, thus forming a network that represents the topology of the filament ensemble. We further detect junction points in the network and break the SOACs at junctions to obtain "SOAC segments". These segments are then re-grouped using a graph-cut spectral clustering method to represent the configuration of actin filaments. The proposed approach is generally applicable to extracting intersecting curvilinear structures in noisy images. We demonstrate its potential using two kinds of data: (1) actin filaments imaged by Total Internal Reflection Fluorescence Microscopy (TIRFM) in vitro; (2) actin cytoskeleton networks in fission yeast imaged by spinning disk confocal microscopy. PMID:21822463

  7. Accurate Morphology Preserving Segmentation of Overlapping Cells based on Active Contours

    PubMed Central

    Molnar, Csaba; Jermyn, Ian H.; Kato, Zoltan; Rahkama, Vesa; Östling, Päivi; Mikkonen, Piia; Pietiäinen, Vilja; Horvath, Peter

    2016-01-01

    The identification of fluorescently stained cell nuclei is the basis of cell detection, segmentation, and feature extraction in high content microscopy experiments. The nuclear morphology of single cells is also one of the essential indicators of phenotypic variation. However, the cells used in experiments can lose their contact inhibition, and can therefore pile up on top of each other, making the detection of single cells extremely challenging using current segmentation methods. The model we present here can detect cell nuclei and their morphology even in high-confluency cell cultures with many overlapping cell nuclei. We combine the “gas of near circles” active contour model, which favors circular shapes but allows slight variations around them, with a new data model. This captures a common property of many microscopic imaging techniques: the intensities from superposed nuclei are additive, so that two overlapping nuclei, for example, have a total intensity that is approximately double the intensity of a single nucleus. We demonstrate the power of our method on microscopic images of cells, comparing the results with those obtained from a widely used approach, and with manual image segmentations by experts. PMID:27561654

  8. Accurate Morphology Preserving Segmentation of Overlapping Cells based on Active Contours.

    PubMed

    Molnar, Csaba; Jermyn, Ian H; Kato, Zoltan; Rahkama, Vesa; Östling, Päivi; Mikkonen, Piia; Pietiäinen, Vilja; Horvath, Peter

    2016-01-01

    The identification of fluorescently stained cell nuclei is the basis of cell detection, segmentation, and feature extraction in high content microscopy experiments. The nuclear morphology of single cells is also one of the essential indicators of phenotypic variation. However, the cells used in experiments can lose their contact inhibition, and can therefore pile up on top of each other, making the detection of single cells extremely challenging using current segmentation methods. The model we present here can detect cell nuclei and their morphology even in high-confluency cell cultures with many overlapping cell nuclei. We combine the "gas of near circles" active contour model, which favors circular shapes but allows slight variations around them, with a new data model. This captures a common property of many microscopic imaging techniques: the intensities from superposed nuclei are additive, so that two overlapping nuclei, for example, have a total intensity that is approximately double the intensity of a single nucleus. We demonstrate the power of our method on microscopic images of cells, comparing the results with those obtained from a widely used approach, and with manual image segmentations by experts. PMID:27561654

  9. Robust contour tracking in ultrasound tongue image sequences.

    PubMed

    Xu, Kele; Yang, Yin; Stone, Maureen; Jaumard-Hakoun, Aurore; Leboullenger, Clémence; Dreyfus, Gérard; Roussel, Pierre; Denby, Bruce

    2016-01-01

    A new contour-tracking algorithm is presented for ultrasound tongue image sequences, which can follow the motion of tongue contours over long durations with good robustness. To cope with missing segments caused by noise, or by the tongue midsagittal surface being parallel to the direction of ultrasound wave propagation, active contours with a contour-similarity constraint are introduced, which can be used to provide 'prior' shape information. Also, in order to address accumulation of tracking errors over long sequences, we present an automatic re-initialization technique, based on the complex wavelet image similarity index. Experiments on synthetic data and on real 60 frame per second (fps) data from different subjects demonstrate that the proposed method gives good contour tracking for ultrasound image sequences even over durations of minutes, which can be useful in applications such as speech recognition where very long sequences must be analyzed in their entirety. PMID:26786063

  10. Assessment of carotid diameter and wall thickness in ultrasound images using active contours improved by a multiresolution technique

    NASA Astrophysics Data System (ADS)

    Gutierrez, Marco A.; Pilon, Paulo E.; Lage, Silvia G.; Kopel, Liliane; Carvalho, Ricardo T.; Furuie, Sergio S.

    2002-04-01

    Carotid vessel ultrasound imaging is a reliable non-invasive technique to measure the arterial morphology. Vessel diameter, intima-media thickness (IMT) of the far wall and plaque presence can be reliably determined using B-mode ultrasound. In this paper we describe a semi-automatic approach to measure artery diameter and IMT based on an active contour technique improved by a multiresolution analysis. The operator selects a region-of-interest (ROI) in a series of carotid images obtained from B-mode ultrasound. This set of images is convolved with the corresponding partial derivatives of the Gaussian filter. The filter response is used to compute a 2D gradient magnitude image in order to refine the vessel's boundaries. Using an active contour technique the vessel's border is determined automatically. The near wall media-adventitia (NWMA), far wall media-adventitia (FWMA) and far wall lumen-intima (FWLI) borders are obtained by a least-square fitting of the active contours result. The distance between NWMA and FWLI (vessel diameter) and between FWLI and FWMA (far wall intima-media thickness) are obtained for all images and the mean value is computed during systole and diastole. The proposed method is a reliable and reproducible way of assessing the vessel diameter and far wall intima-media thickness of the carotid artery.

  11. Contour Mapping

    NASA Technical Reports Server (NTRS)

    1995-01-01

    In the early 1990s, the Ohio State University Center for Mapping, a NASA Center for the Commercial Development of Space (CCDS), developed a system for mobile mapping called the GPSVan. While driving, the users can map an area from the sophisticated mapping van equipped with satellite signal receivers, video cameras and computer systems for collecting and storing mapping data. George J. Igel and Company and the Ohio State University Center for Mapping advanced the technology for use in determining the contours of a construction site. The new system reduces the time required for mapping and staking, and can monitor the amount of soil moved.

  12. Segmenting the thoracic, abdominal and pelvic musculature on CT scans combining atlas-based model and active contour model

    NASA Astrophysics Data System (ADS)

    Zhang, Weidong; Liu, Jiamin; Yao, Jianhua; Summers, Ronald M.

    2013-03-01

    Segmentation of the musculature is very important for accurate organ segmentation, analysis of body composition, and localization of tumors in the muscle. In research fields of computer assisted surgery and computer-aided diagnosis (CAD), muscle segmentation in CT images is a necessary pre-processing step. This task is particularly challenging due to the large variability in muscle structure and the overlap in intensity between muscle and internal organs. This problem has not been solved completely, especially for all of thoracic, abdominal and pelvic regions. We propose an automated system to segment the musculature on CT scans. The method combines an atlas-based model, an active contour model and prior segmentation of fat and bones. First, body contour, fat and bones are segmented using existing methods. Second, atlas-based models are pre-defined using anatomic knowledge at multiple key positions in the body to handle the large variability in muscle shape. Third, the atlas model is refined using active contour models (ACM) that are constrained using the pre-segmented bone and fat. Before refining using ACM, the initialized atlas model of next slice is updated using previous atlas. The muscle is segmented using threshold and smoothed in 3D volume space. Thoracic, abdominal and pelvic CT scans were used to evaluate our method, and five key position slices for each case were selected and manually labeled as the reference. Compared with the reference ground truth, the overlap ratio of true positives is 91.1%+/-3.5%, and that of false positives is 5.5%+/-4.2%.

  13. Three-Dimensional Contour Maps

    ERIC Educational Resources Information Center

    Lee, Edward

    2005-01-01

    In summary, this highly conceptual activity helps middle school students understand that the lines on the contour map represent intersections of the surface of the landform with regularly spaced horizontal planes. Building the landform and relating its features to the contour map offer many opportunities for visualization, all grounded in concrete…

  14. Reprogramming the Chemodiversity of Terpenoid Cyclization by Remolding the Active Site Contour of epi-Isozizaene Synthase

    PubMed Central

    2015-01-01

    The class I terpenoid cyclase epi-isozizaene synthase (EIZS) utilizes the universal achiral isoprenoid substrate, farnesyl diphosphate, to generate epi-isozizaene as the predominant sesquiterpene cyclization product and at least five minor sesquiterpene products, making EIZS an ideal platform for the exploration of fidelity and promiscuity in a terpenoid cyclization reaction. The hydrophobic active site contour of EIZS serves as a template that enforces a single substrate conformation, and chaperones subsequently formed carbocation intermediates through a well-defined mechanistic sequence. Here, we have used the crystal structure of EIZS as a guide to systematically remold the hydrophobic active site contour in a library of 26 site-specific mutants. Remolded cyclization templates reprogram the reaction cascade not only by reproportioning products generated by the wild-type enzyme but also by generating completely new products of diverse structure. Specifically, we have tripled the overall number of characterized products generated by EIZS. Moreover, we have converted EIZS into six different sesquiterpene synthases: F96A EIZS is an (E)-β-farnesene synthase, F96W EIZS is a zizaene synthase, F95H EIZS is a β-curcumene synthase, F95M EIZS is a β-acoradiene synthase, F198L EIZS is a β-cedrene synthase, and F96V EIZS and W203F EIZS are (Z)-γ-bisabolene synthases. Active site aromatic residues appear to be hot spots for reprogramming the cyclization cascade by manipulating the stability and conformation of critical carbocation intermediates. A majority of mutant enzymes exhibit only relatively modest 2–100-fold losses of catalytic activity, suggesting that residues responsible for triggering substrate ionization readily tolerate mutations deeper in the active site cavity. PMID:24517311

  15. Wavelet Representation of Contour Sets

    SciTech Connect

    Bertram, M; Laney, D E; Duchaineau, M A; Hansen, C D; Hamann, B; Joy, K I

    2001-07-19

    We present a new wavelet compression and multiresolution modeling approach for sets of contours (level sets). In contrast to previous wavelet schemes, our algorithm creates a parametrization of a scalar field induced by its contoum and compactly stores this parametrization rather than function values sampled on a regular grid. Our representation is based on hierarchical polygon meshes with subdivision connectivity whose vertices are transformed into wavelet coefficients. From this sparse set of coefficients, every set of contours can be efficiently reconstructed at multiple levels of resolution. When applying lossy compression, introducing high quantization errors, our method preserves contour topology, in contrast to compression methods applied to the corresponding field function. We provide numerical results for scalar fields defined on planar domains. Our approach generalizes to volumetric domains, time-varying contours, and level sets of vector fields.

  16. Magnetic Resonance Imaging-Based Target Volume Delineation in Radiation Therapy Treatment Planning for Brain Tumors Using Localized Region-Based Active Contour

    SciTech Connect

    Aslian, Hossein; Sadeghi, Mahdi; Mahdavi, Seied Rabie; Babapour Mofrad, Farshid; Astarakee, Mahdi; Khaledi, Navid; Fadavi, Pedram

    2013-09-01

    Purpose: To evaluate the clinical application of a robust semiautomatic image segmentation method to determine the brain target volumes in radiation therapy treatment planning. Methods and Materials: A local robust region-based algorithm was used on MRI brain images to study the clinical target volume (CTV) of several patients. First, 3 oncologists delineated CTVs of 10 patients manually, and the process time for each patient was calculated. The averages of the oncologists’ contours were evaluated and considered as reference contours. Then, to determine the CTV through the semiautomatic method, a fourth oncologist who was blind to all manual contours selected 4-8 points around the edema and defined the initial contour. The time to obtain the final contour was calculated again for each patient. Manual and semiautomatic segmentation were compared using 3 different metric criteria: Dice coefficient, Hausdorff distance, and mean absolute distance. A comparison also was performed between volumes obtained from semiautomatic and manual methods. Results: Manual delineation processing time of tumors for each patient was dependent on its size and complexity and had a mean (±SD) of 12.33 ± 2.47 minutes, whereas it was 3.254 ± 1.7507 minutes for the semiautomatic method. Means of Dice coefficient, Hausdorff distance, and mean absolute distance between manual contours were 0.84 ± 0.02, 2.05 ± 0.66 cm, and 0.78 ± 0.15 cm, and they were 0.82 ± 0.03, 1.91 ± 0.65 cm, and 0.7 ± 0.22 cm between manual and semiautomatic contours, respectively. Moreover, the mean volume ratio (=semiautomatic/manual) calculated for all samples was 0.87. Conclusions: Given the deformability of this method, the results showed reasonable accuracy and similarity to the results of manual contouring by the oncologists. This study shows that the localized region-based algorithms can have great ability in determining the CTV and can be appropriate alternatives for manual approaches in brain cancer.

  17. Computer-aided diagnosis of pulmonary nodules on CT scans: Segmentation and classification using 3D active contours

    PubMed Central

    Way, Ted W.; Hadjiiski, Lubomir M.; Sahiner, Berkman; Chan, Heang-Ping; Cascade, Philip N.; Kazerooni, Ella A.; Bogot, Naama; Zhou, Chuan

    2009-01-01

    We are developing a computer-aided diagnosis (CAD) system to classify malignant and benign lung nodules found on CT scans. A fully automated system was designed to segment the nodule from its surrounding structured background in a local volume of interest (VOI) and to extract image features for classification. Image segmentation was performed with a three-dimensional (3D) active contour (AC) method. A data set of 96 lung nodules (44 malignant, 52 benign) from 58 patients was used in this study. The 3D AC model is based on two-dimensional AC with the addition of three new energy components to take advantage of 3D information: (1) 3D gradient, which guides the active contour to seek the object surface, (2) 3D curvature, which imposes a smoothness constraint in the z direction, and (3) mask energy, which penalizes contours that grow beyond the pleura or thoracic wall. The search for the best energy weights in the 3D AC model was guided by a simplex optimization method. Morphological and gray-level features were extracted from the segmented nodule. The rubber band straightening transform (RBST) was applied to the shell of voxels surrounding the nodule. Texture features based on run-length statistics were extracted from the RBST image. A linear discriminant analysis classifier with stepwise feature selection was designed using a second simplex optimization to select the most effective features. Leave-one-case-out resampling was used to train and test the CAD system. The system achieved a test area under the receiver operating characteristic curve (Az) of 0.83±0.04. Our preliminary results indicate that use of the 3D AC model and the 3D texture features surrounding the nodule is a promising approach to the segmentation and classification of lung nodules with CAD. The segmentation performance of the 3D AC model trained with our data set was evaluated with 23 nodules available in the Lung Image Database Consortium (LIDC). The lung nodule volumes segmented by the 3D AC

  18. Accurate and Fully Automatic Hippocampus Segmentation Using Subject-Specific 3D Optimal Local Maps Into a Hybrid Active Contour Model

    PubMed Central

    Gkontra, Polyxeni; Daras, Petros; Maglaveras, Nicos

    2014-01-01

    Assessing the structural integrity of the hippocampus (HC) is an essential step toward prevention, diagnosis, and follow-up of various brain disorders due to the implication of the structural changes of the HC in those disorders. In this respect, the development of automatic segmentation methods that can accurately, reliably, and reproducibly segment the HC has attracted considerable attention over the past decades. This paper presents an innovative 3-D fully automatic method to be used on top of the multiatlas concept for the HC segmentation. The method is based on a subject-specific set of 3-D optimal local maps (OLMs) that locally control the influence of each energy term of a hybrid active contour model (ACM). The complete set of the OLMs for a set of training images is defined simultaneously via an optimization scheme. At the same time, the optimal ACM parameters are also calculated. Therefore, heuristic parameter fine-tuning is not required. Training OLMs are subsequently combined, by applying an extended multiatlas concept, to produce the OLMs that are anatomically more suitable to the test image. The proposed algorithm was tested on three different and publicly available data sets. Its accuracy was compared with that of state-of-the-art methods demonstrating the efficacy and robustness of the proposed method. PMID:27170866

  19. Accurate and Fully Automatic Hippocampus Segmentation Using Subject-Specific 3D Optimal Local Maps Into a Hybrid Active Contour Model.

    PubMed

    Zarpalas, Dimitrios; Gkontra, Polyxeni; Daras, Petros; Maglaveras, Nicos

    2014-01-01

    Assessing the structural integrity of the hippocampus (HC) is an essential step toward prevention, diagnosis, and follow-up of various brain disorders due to the implication of the structural changes of the HC in those disorders. In this respect, the development of automatic segmentation methods that can accurately, reliably, and reproducibly segment the HC has attracted considerable attention over the past decades. This paper presents an innovative 3-D fully automatic method to be used on top of the multiatlas concept for the HC segmentation. The method is based on a subject-specific set of 3-D optimal local maps (OLMs) that locally control the influence of each energy term of a hybrid active contour model (ACM). The complete set of the OLMs for a set of training images is defined simultaneously via an optimization scheme. At the same time, the optimal ACM parameters are also calculated. Therefore, heuristic parameter fine-tuning is not required. Training OLMs are subsequently combined, by applying an extended multiatlas concept, to produce the OLMs that are anatomically more suitable to the test image. The proposed algorithm was tested on three different and publicly available data sets. Its accuracy was compared with that of state-of-the-art methods demonstrating the efficacy and robustness of the proposed method. PMID:27170866

  20. Continuous noninvasive cardiac output determination using the CNAP system: evaluation of a cardiac output algorithm for the analysis of volume clamp method-derived pulse contour.

    PubMed

    Wagner, Julia Y; Grond, Julian; Fortin, Jürgen; Negulescu, Ileana; Schöfthaler, Miriam; Saugel, Bernd

    2016-08-01

    The CNAP system (CNSystems Medizintechnik AG, Graz, Austria) provides noninvasive continuous arterial pressure measurements by using the volume clamp method. Recently, an algorithm for the determination of cardiac output by pulse contour analysis of the arterial waveform recorded with the CNAP system became available. We evaluated the agreement of the continuous noninvasive cardiac output (CNCO) measurements by CNAP in comparison with cardiac output measurements invasively obtained using transpulmonary thermodilution (TDCO). In this proof-of-concept analysis we studied 38 intensive care unit patients from a previously set up database containing CNAP-derived arterial pressure data and TDCO values obtained with the PiCCO system (Pulsion Medical Systems SE, Feldkirchen, Germany). We applied the new CNCO algorithm retrospectively to the arterial pressure waveforms recorded with CNAP and compared CNCO with the corresponding TDCO values (criterion standard). Analyses were performed separately for (1) CNCO calibrated to the first TDCO (CNCO-cal) and (2) CNCO autocalibrated to biometric patient data (CNCO-auto). We did not perform an analysis of trending capabilities because the patients were hemodynamically stable. The median age and APACHE II score of the 22 male and 16 female patients was 63 years and 18 points, respectively. 18 % were mechanically ventilated and in 29 % vasopressors were administered. Mean ± standard deviation for CNCO-cal, CNCO-auto, and TDCO was 8.1 ± 2.7, 6.4 ± 1.9, and 7.8 ± 2.4 L/min, respectively. For CNCO-cal versus TDCO, Bland-Altman analysis demonstrated a mean difference of +0.2 L/min (standard deviation 1.0 L/min; 95 % limits of agreement -1.7 to +2.2 L/min, percentage error 25 %). For CNCO-auto versus TDCO, the mean difference was -1.4 L/min (standard deviation 1.8 L/min; 95 % limits of agreement -4.9 to +2.1 L/min, percentage error 45 %). This pilot analysis shows that CNCO determination is feasible in critically

  1. Incorporating patch subspace model in Mumford-Shah type active contours.

    PubMed

    Wang, Junyan; Chan, Kap Luk

    2013-11-01

    In this paper, we propose a unified energy minimization model for segmentation of non-smooth image structures, e.g., textures, based on Mumford-Shah functional and linear patch model. We consider that image patches of a non-smooth image structure can be modeled by a patch subspace, and image patches of different non-smooth image structures belong to different patch subspaces, which leads to a computational framework for segmentation of non-smooth image structures. Motivated by the Mumford-Shah model, we show that this segmentation framework is equivalent to minimizing a piecewise linear patch reconstruction energy. We also prove that the error of segmentation is bounded by the error of the linear patch reconstruction, meaning that improving the linear patch reconstruction for each region leads to reduction of the segmentation error. In addition, we derive an algorithm for the linear patch reconstruction with proven global optimality and linear rate of convergence. The segmentation in our method is achieved by minimizing a single energy functional without requiring predefined features. Hence, compared with the previous methods that require predefined texture features, our method can be more suitable for handling general textures in unsupervised segmentation. As a by-product, our method also produces a dictionary of optimized orthonormal descriptors for each segmented region. We mainly evaluate our method on the Brodatz textures. The experiments validate our theoretical claims and show the clear superior performance of our methods over other related methods for segmentation of the textures. PMID:23893721

  2. Determination of aortic compliance from magnetic resonance images using an automatic active contour model

    NASA Astrophysics Data System (ADS)

    Krug, Roland; Boese, Jan M.; Schad, Lothar R.

    2003-08-01

    The possibility of monitoring changes in aortic elasticity in humans has important applications for clinical trials because it estimates the efficacy of plaque-reducing therapies. The elasticity is usually quantified by compliance measurements. Therefore, the relative temporal change in the vessel cross-sectional area throughout the cardiac cycle has to be determined. In this work we determined and compared the compliance between three magnetic resonance (MR) methods (FLASH, TrueFISP and pulse-wave). Since manual outlining of the aortic wall area is a very time-consuming process and depends on an operator's variability, an algorithm for the automatic segmentation of the artery wall from MR images through the entire heart cycle is presented. The reliable detection of the artery cross-sectional area over the whole heart cycle was possible with a relative error of about 1%. Optimizing the temporal resolution to 60 ms we obtained a relative error in compliance of about 7% from TrueFISP (1.0 × 1.0 × 10 mm3, signal-to-noise ratio (SNR) > 12) and FLASH (0.7 × 0.7 × 10 mm3, SNR > 12) measurements in volunteers. Pulse-wave measurements yielded an error of more than 9%. In a study of ten volunteers, a compliance between C = 3 × 10-5 Pa-1 and C = 8 × 10-5 Pa-1 was determined, depending on age. The results of the TrueFISP and the pulse-wave measurements agreed very well with one another (confidence interval of 1 × 10-5 Pa-1) while the results of the FLASH method more clearly deviated from the TrueFISP and pulse-wave (confidence interval of more than 2 × 10-5 Pa-1).

  3. pSnakes: a new radial active contour model and its application in the segmentation of the left ventricle from echocardiographic images.

    PubMed

    de Alexandria, Auzuir Ripardo; Cortez, Paulo César; Bessa, Jessyca Almeida; da Silva Félix, John Hebert; de Abreu, José Sebastião; de Albuquerque, Victor Hugo C

    2014-10-01

    Active contours are image segmentation methods that minimize the total energy of the contour to be segmented. Among the active contour methods, the radial methods have lower computational complexity and can be applied in real time. This work aims to present a new radial active contour technique, called pSnakes, using the 1D Hilbert transform as external energy. The pSnakes method is based on the fact that the beams in ultrasound equipment diverge from a single point of the probe, thus enabling the use of polar coordinates in the segmentation. The control points or nodes of the active contour are obtained in pairs and are called twin nodes. The internal energies as well as the external one, Hilbertian energy, are redefined. The results showed that pSnakes can be used in image segmentation of short-axis echocardiogram images and that they were effective in image segmentation of the left ventricle. The echo-cardiologist's golden standard showed that the pSnakes was the best method when compared with other methods. The main contributions of this work are the use of pSnakes and Hilbertian energy, as the external energy, in image segmentation. The Hilbertian energy is calculated by the 1D Hilbert transform. Compared with traditional methods, the pSnakes method is more suitable for ultrasound images because it is not affected by variations in image contrast, such as noise. The experimental results obtained by the left ventricle segmentation of echocardiographic images demonstrated the advantages of the proposed model. The results presented in this paper are justified due to an improved performance of the Hilbert energy in the presence of speckle noise. PMID:24957548

  4. Segmentation of solid subregion of high grade gliomas in MRI images based on active contour model (ACM)

    NASA Astrophysics Data System (ADS)

    Seow, P.; Win, M. T.; Wong, J. H. D.; Abdullah, N. A.; Ramli, N.

    2016-03-01

    Gliomas are tumours arising from the interstitial tissue of the brain which are heterogeneous, infiltrative and possess ill-defined borders. Tumour subregions (e.g. solid enhancing part, edema and necrosis) are often used for tumour characterisation. Tumour demarcation into substructures facilitates glioma staging and provides essential information. Manual segmentation had several drawbacks that include laborious, time consuming, subjected to intra and inter-rater variability and hindered by diversity in the appearance of tumour tissues. In this work, active contour model (ACM) was used to segment the solid enhancing subregion of the tumour. 2D brain image acquisition data using 3T MRI fast spoiled gradient echo sequence in post gadolinium of four histologically proven high-grade glioma patients were obtained. Preprocessing of the images which includes subtraction and skull stripping were performed and then followed by ACM segmentation. The results of the automatic segmentation method were compared against the manual delineation of the tumour by a trainee radiologist. Both results were further validated by an experienced neuroradiologist and a brief quantitative evaluations (pixel area and difference ratio) were performed. Preliminary results of the clinical data showed the potential of ACM model in the application of fast and large scale tumour segmentation in medical imaging.

  5. MULTISCALE DISCRETIZATION OF SHAPE CONTOURS

    SciTech Connect

    Prasad, L.; Rao, R.

    2000-09-01

    We present an efficient multi-scale scheme to adaptively approximate the continuous (or densely sampled) contour of a planar shape at varying resolutions. The notion of shape is intimately related to the notion of contour, and the efficient representation of the contour of a shape is vital to a computational understanding of the shape. Any polygonal approximation of a planar smooth curve is equivalent to a piecewise constant approximation of the parameterized X and Y coordinate functions of a discrete point set obtained by densely sampling the curve. Using the Haar wavelet transform for the piecewise approximation yields a hierarchical scheme in which the size of the approximating point set is traded off against the morphological accuracy of the approximation. Our algorithm compresses the representation of the initial shape contour to a sparse sequence of points in the plane defining the vertices of the shape's polygonal approximation. Furthermore, it is possible to control the overall resolution of the approximation by a single, scale-independent parameter.

  6. Infrared active polarimetric imaging system controlled by image segmentation algorithms: application to decamouflage

    NASA Astrophysics Data System (ADS)

    Vannier, Nicolas; Goudail, François; Plassart, Corentin; Boffety, Matthieu; Feneyrou, Patrick; Leviandier, Luc; Galland, Frédéric; Bertaux, Nicolas

    2016-05-01

    We describe an active polarimetric imager with laser illumination at 1.5 µm that can generate any illumination and analysis polarization state on the Poincar sphere. Thanks to its full polarization agility and to image analysis of the scene with an ultrafast active-contour based segmentation algorithm, it can perform adaptive polarimetric contrast optimization. We demonstrate the capacity of this imager to detect manufactured objects in different types of environments for such applications as decamouflage and hazardous object detection. We compare two imaging modes having different number of polarimetric degrees of freedom and underline the characteristics that a polarimetric imager aimed at this type of applications should possess.

  7. An Experimental Method for the Active Learning of Greedy Algorithms

    ERIC Educational Resources Information Center

    Velazquez-Iturbide, J. Angel

    2013-01-01

    Greedy algorithms constitute an apparently simple algorithm design technique, but its learning goals are not simple to achieve.We present a didacticmethod aimed at promoting active learning of greedy algorithms. The method is focused on the concept of selection function, and is based on explicit learning goals. It mainly consists of an…

  8. Distributed Contour Trees

    SciTech Connect

    Morozov, Dmitriy; Weber, Gunther H.

    2014-03-31

    Topological techniques provide robust tools for data analysis. They are used, for example, for feature extraction, for data de-noising, and for comparison of data sets. This chapter concerns contour trees, a topological descriptor that records the connectivity of the isosurfaces of scalar functions. These trees are fundamental to analysis and visualization of physical phenomena modeled by real-valued measurements. We study the parallel analysis of contour trees. After describing a particular representation of a contour tree, called local{global representation, we illustrate how di erent problems that rely on contour trees can be solved in parallel with minimal communication.

  9. Automatic segmentation of head and neck CT images for radiotherapy treatment planning using multiple atlases, statistical appearance models, and geodesic active contours

    SciTech Connect

    Fritscher, Karl D. Sharp, Gregory; Peroni, Marta; Zaffino, Paolo; Spadea, Maria Francesca; Schubert, Rainer

    2014-05-15

    Purpose: Accurate delineation of organs at risk (OARs) is a precondition for intensity modulated radiation therapy. However, manual delineation of OARs is time consuming and prone to high interobserver variability. Because of image artifacts and low image contrast between different structures, however, the number of available approaches for autosegmentation of structures in the head-neck area is still rather low. In this project, a new approach for automated segmentation of head-neck CT images that combine the robustness of multiatlas-based segmentation with the flexibility of geodesic active contours and the prior knowledge provided by statistical appearance models is presented. Methods: The presented approach is using an atlas-based segmentation approach in combination with label fusion in order to initialize a segmentation pipeline that is based on using statistical appearance models and geodesic active contours. An anatomically correct approximation of the segmentation result provided by atlas-based segmentation acts as a starting point for an iterative refinement of this approximation. The final segmentation result is based on using model to image registration and geodesic active contours, which are mutually influencing each other. Results: 18 CT images in combination with manually segmented labels of parotid glands and brainstem were used in a leave-one-out cross validation scheme in order to evaluate the presented approach. For this purpose, 50 different statistical appearance models have been created and used for segmentation. Dice coefficient (DC), mean absolute distance and max. Hausdorff distance between the autosegmentation results and expert segmentations were calculated. An average Dice coefficient of DC = 0.81 (right parotid gland), DC = 0.84 (left parotid gland), and DC = 0.86 (brainstem) could be achieved. Conclusions: The presented framework provides accurate segmentation results for three important structures in the head neck area. Compared to a

  10. Contouring Trivariate Data

    NASA Technical Reports Server (NTRS)

    Stead, S. E.; Makatura, G. T.

    1985-01-01

    In many applications, the data consist of discrete 3-D points at which one or more parameters are given. To display contours, the data are represented by a continuous function which is evaluated at any point as needed for contouring. Contouring results are presented which are applicable both to artitrarily spaced data and to data which lie on a topologically rectangular three dimensional grid. the contours are assumed to be described by 3-D display lists for viewing on a dynamic color graphics device; that is, they will not simply be projected into 2-D and viewed as a static image on a frame buffer. Dynamic viewing of color contours may be essential to the proper interpretation of results. The gridded data lie on a topologically rectangular grid although two or more nodes may be the same point. Parametric tensor product methods may be used to fit the gridded data and to generate the contours. Rectangular elements are convenient but not necessary. For example, there are other methods which are effective for contouring over tetrahedral elements.

  11. Male Body Contouring.

    PubMed

    Singh, Babu; Keaney, Terrence; Rossi, Anthony M

    2015-09-01

    Men are increasingly turning to dermatologists and plastic surgeons to request procedures that correct or enhance physical features. With the advent of this emerging new patient population, alterations in preexisting aesthetic techniques, gender-specific uses of existing devices and overall approaches need to be revisited and adapted to obtain results that are suitable for the male patient. Recently, body contouring has become one of the most sought out procedures by men. Although the majority of clinical studies involving body contouring esthetics are performed with female patients, gains from such studies can be extrapolated to men. Body contouring can be broadly classified as non-invasive or invasive, depending on the modality used. Non-invasive contouring is most frequently performed with devices that target subcutaneous adipose with focused electrical or thermal energy, including low-level laser, cryolipolysis, ultrasonography, and radiofrequency. Invasive body contouring modalities useful for male body contouring include liposuction, pectoral and abdominal wall etching, jawline fillers, synthetic deoxycholic acid injections, and solid silicone implants. The purpose of this review is to bring attention to the unique aspects, strategies, and modalities used in aesthetic body contouring for the male patient. PMID:26355627

  12. Modeling robot contour processes

    NASA Astrophysics Data System (ADS)

    Whitney, D. E.; Edsall, A. C.

    Robot contour processes include those with contact force like car body grinding or deburring of complex castings, as well as those with little or no contact force like inspection. This paper describes ways of characterizing, identifying, and estimating contours and robot trajectories. Contour and robot are modeled as stochastic processes in order to emphasize that both successive robot cycles and successive industrial workpieces are similar but not exactly the same. The stochastic models can be used to identify the state of a workpiece or process, or to design a filter to estimate workpiece, shape and robot position from robot-based measurements.

  13. Automatic Contour Detection Using a "Fixed-Point Hachimura-Kuwahara Filter" for SPECT Attenuation Correction.

    PubMed

    Minato, K; Tang, Y N; Bennett, G W; Brill, A

    1987-01-01

    Attenuation correction for single-photon emission computed tomography (SPECT) usually assumes a uniform attenuation distribution within the body surface contour. Previous methods to estimate this contour have used thresholding of a reconstructed section image. This method is often very sensitive to the selection of a threshold value, especially for nonuniform activity distributions within the body. We have proposed the "fixed-point Hachimura-Kuwahara filter" to extract contour primitives from SPECT images. The Hachimura-Kuwahara filter, which preserves edges but smoothes nonedge regions, is applied repeatedly to identify the invariant set-the fixed-point image-which is unchanged by this nonlinear, two-dimensional filtering operation. This image usually becomes a piecewise constant array. In order to detect the contour, the tracing algorithm based on the minimum distance connection criterion is applied to the extracted contour primitives. This procedure does not require choice of a threshold value in determining the contour. SPECT data from a water-filled elliptical phantom containing three sources was obtained and scattered projections were reconstructed. The automatic edge detection procedure was applied to the scattered window reconstruction, resulting in a reasonable outline of the phantom. PMID:18230438

  14. Predicting mining activity with parallel genetic algorithms

    USGS Publications Warehouse

    Talaie, S.; Leigh, R.; Louis, S.J.; Raines, G.L.

    2005-01-01

    We explore several different techniques in our quest to improve the overall model performance of a genetic algorithm calibrated probabilistic cellular automata. We use the Kappa statistic to measure correlation between ground truth data and data predicted by the model. Within the genetic algorithm, we introduce a new evaluation function sensitive to spatial correctness and we explore the idea of evolving different rule parameters for different subregions of the land. We reduce the time required to run a simulation from 6 hours to 10 minutes by parallelizing the code and employing a 10-node cluster. Our empirical results suggest that using the spatially sensitive evaluation function does indeed improve the performance of the model and our preliminary results also show that evolving different rule parameters for different regions tends to improve overall model performance. Copyright 2005 ACM.

  15. Variable contour securing system

    NASA Technical Reports Server (NTRS)

    Zebus, P. P.; Packer, P. N.; Haynie, C. C. (Inventor)

    1978-01-01

    A variable contour securing system has a retaining structure for a member whose surface contains a variable contour. The retaining mechanism includes a spaced array of adjustable spindles mounted on a housing. Each spindle has a base member support cup at one end. A vacuum source is applied to the cups for seating the member adjacent to the cups. A locking mechanism sets the spindles in a predetermined position once the member has been secured to the spindle support cups.

  16. An active set algorithm for nonlinear optimization with polyhedral constraints

    NASA Astrophysics Data System (ADS)

    Hager, William W.; Zhang, Hongchao

    2016-08-01

    A polyhedral active set algorithm PASA is developed for solving a nonlinear optimization problem whose feasible set is a polyhedron. Phase one of the algorithm is the gradient projection method, while phase two is any algorithm for solving a linearly constrained optimization problem. Rules are provided for branching between the two phases. Global convergence to a stationary point is established, while asymptotically PASA performs only phase two when either a nondegeneracy assumption holds, or the active constraints are linearly independent and a strong second-order sufficient optimality condition holds.

  17. Leaf Shape Recognition using Centroid Contour Distance

    NASA Astrophysics Data System (ADS)

    Hasim, Abdurrasyid; Herdiyeni, Yeni; Douady, Stephane

    2016-01-01

    This research recognizes the leaf shape using Centroid Contour Distance (CCD) as shape descriptor. CCD is an algorithm of shape representation contour-based approach which only exploits boundary information. CCD calculates the distance between the midpoint and the points on the edge corresponding to interval angle. Leaf shapes that included in this study are ellips, cordate, ovate, and lanceolate. We analyzed 200 leaf images of tropical plant. Each class consists of 50 images. The best accuracy is obtained by 96.67%. We used Probabilistic Neural Network to classify the leaf shape. Experimental results demonstrated the effectiveness of the proposed approach for shape recognition with high accuracy.

  18. Doubly rotated contoured quartz resonators.

    PubMed

    Sinha, B K

    2001-09-01

    Doubly rotated contoured quartz resonators are used in the design of temperature-compensated stable clocks and dual-mode sensors for simultaneous measurements of pressure and temperature. The design of these devices is facilitated by models that can predict frequency spectra associated with the three thickness modes and temperature and stress-induced frequency changes as a function of crystalline orientation. The Stevens-Tiersten technique for the analysis of the C-mode of a doubly rotated contoured quartz resonator is extended to include the other two thickness modes. Computational results for harmonic and anharmonic overtones of all three thickness modes of such resonators help in optimizing the radius of curvature of the contour and electrode shape for suppression of unwanted modes and prevention of activity dips. The temperature and stress-induced changes in thickness-mode resonator frequencies are calculated from a perturbation technique for small dynamic fields superposed on a static bias. The static bias refers to either a temperature or stress-induced static deformation of the resonator plate. Phenomenological models are also used for calculating the temperature and stress-induced changes in resonant frequencies as a function of crystalline orientation. Results for the SBTC-cut quartz plate with a spherical convex contour of 260 mm indicate that normal trapping occurs for the third (n = 3) and fifth (n = 5) harmonic of the A-mode, the fundamental (n = 1) and third (n = 3) harmonic of the B-mode, and the fundamental (n = 1) and fifth (n = 5) harmonic of the C-mode. PMID:11570746

  19. Contour detection based on brightness and contour completion

    NASA Astrophysics Data System (ADS)

    Zou, Lamei; Wan, Min; Jin, Liujia; Gao, Yahong; Yang, Weidong

    2015-12-01

    The further research of visual processing mechanism provides a new idea for contour detection. On the primary visual cortex, the non-classical receptive field of the neurons has the orientation selectivity exerts suppression effect on the response of classical receptive field, which influences edge or line perception. Based on the suppression property of non-classical receptive field and contour completion, this paper proposed a contour detection method based on brightness and contour completion. The experiment shows that the proposed method can not only effectively eliminate clutter information, but also connect the broken contour points by taking advantage of contour completion.

  20. Portable FORTRAN contour-plotting subprogram

    SciTech Connect

    Haskell, K.H.

    1983-07-01

    In this report we discuss a contour plotting Fortran subprogram. While contour plotting subroutines are available in many commercial plotting packages, this routine has the following advantages: (1) since it uses the Weasel and VDI plot routines developed at Sandia, it occupies little storage and can be used on most of the Sandia time-sharing systems as part of a larger program. In the past, the size of plotting packages often forced a user to perform plotting operations in a completely separate program; (2) the contour computation algorithm is efficient and robust, and computes accurate contours for sets of data with low resolution; and (3) the subprogram is easy to use. A simple contour plot can be produced with a minimum of information provided by a user in one Fortran subroutine call. Through the use of a wide variety of subroutine options, many additional features can be used. These include such items as plot titles, grid lines, placement of text on the page, etc. The subroutine is written in portable Fortran 77, and is designed to run on any system which supports the Weasel and VDI plot packages. It also uses routines from the SLATEC mathematical subroutine library.

  1. Dependence of Shape-Based Descriptors and Mass Segmentation Areas on Initial Contour Placement Using the Chan-Vese Method on Digital Mammograms

    PubMed Central

    Acho, S. N.; Rae, W. I. D.

    2015-01-01

    Variation in signal intensity within mass lesions and missing boundary information are intensity inhomogeneities inherent in digital mammograms. These inhomogeneities render the performance of a deformable contour susceptible to the location of its initial position and may lead to poor segmentation results for these images. We investigate the dependence of shape-based descriptors and mass segmentation areas on initial contour placement with the Chan-Vese segmentation method and compare these results to the active contours with selective local or global segmentation model. For each mass lesion, final contours were obtained by propagation of a proposed initial level set contour and by propagation of a manually drawn contour enclosing the region of interest. Differences in shape-based descriptors were quantified using absolute percentage differences, Euclidean distances, and Bland-Altman analysis. Segmented areas were evaluated with the area overlap measure. Differences were dependent upon the characteristics of the mass margins. Boundary moments presented large percentage differences. Pearson correlation analysis showed statistically significant correlations between shape-based descriptors from both initial locations. In conclusion, boundary moments of digital mass lesions are sensitive to the placement of initial level set contours while shape-based descriptors such as Fourier descriptors, shape convexity, and shape rectangularity exhibit a certain degree of robustness to changes in the location of the initial level set contours for both segmentation algorithms. PMID:26379762

  2. An Active Sensor Algorithm for Corn Nitrogen Recommendations Based on a Chlorophyll Meter Algorithm

    Technology Transfer Automated Retrieval System (TEKTRAN)

    In previous work we found active canopy sensor reflectance assessments of corn (Zea mays L.) N status acquired at two growth stages (V11 and V15) have the greatest potential for directing in-season N applications, but emphasized an algorithm was needed to translate sensor readings into appropriate N...

  3. Combining prior day contours to improve automated prostate segmentation

    SciTech Connect

    Godley, Andrew; Sheplan Olsen, Lawrence J.; Stephans, Kevin; Zhao Anzi

    2013-02-15

    Purpose: To improve the accuracy of automatically segmented prostate, rectum, and bladder contours required for online adaptive therapy. The contouring accuracy on the current image guidance [image guided radiation therapy (IGRT)] scan is improved by combining contours from earlier IGRT scans via the simultaneous truth and performance level estimation (STAPLE) algorithm. Methods: Six IGRT prostate patients treated with daily kilo-voltage (kV) cone-beam CT (CBCT) had their original plan CT and nine CBCTs contoured by the same physician. Three types of automated contours were produced for analysis. (1) Plan: By deformably registering the plan CT to each CBCT and then using the resulting deformation field to morph the plan contours to match the CBCT anatomy. (2) Previous: The contour set drawn by the physician on the previous day CBCT is similarly deformed to match the current CBCT anatomy. (3) STAPLE: The contours drawn by the physician, on each prior CBCT and the plan CT, are deformed to match the CBCT anatomy to produce multiple contour sets. These sets are combined using the STAPLE algorithm into one optimal set. Results: Compared to plan and previous, STAPLE improved the average Dice's coefficient (DC) with the original physician drawn CBCT contours to a DC as follows: Bladder: 0.81 {+-} 0.13, 0.91 {+-} 0.06, and 0.92 {+-} 0.06; Prostate: 0.75 {+-} 0.08, 0.82 {+-} 0.05, and 0.84 {+-} 0.05; and Rectum: 0.79 {+-} 0.06, 0.81 {+-} 0.06, and 0.85 {+-} 0.04, respectively. The STAPLE results are within intraobserver consistency, determined by the physician blindly recontouring a subset of CBCTs. Comparing plans recalculated using the physician and STAPLE contours showed an average disagreement less than 1% for prostate D98 and mean dose, and 5% and 3% for bladder and rectum mean dose, respectively. One scan takes an average of 19 s to contour. Using five scans plus STAPLE takes less than 110 s on a 288 core graphics processor unit. Conclusions: Combining the plan and

  4. The Development of Contour Interpolation: Evidence from Subjective Contours

    ERIC Educational Resources Information Center

    Hadad, Bat-Sheva; Maurer, Daphne; Lewis, Terri L.

    2010-01-01

    Adults are skilled at perceiving subjective contours in regions without any local image information (e.g., [Ginsburg, 1975] and [Kanizsa, 1976]). Here we examined the development of this skill and the effect thereon of the support ratio (i.e., the ratio of the physically specified contours to the total contour length). Children (6-, 9-, and…

  5. Detection of suspicious activity using incremental outlier detection algorithms

    NASA Astrophysics Data System (ADS)

    Pokrajac, D.; Reljin, N.; Pejcic, N.; Vance, T.; McDaniel, S.; Lazarevic, A.; Chang, H. J.; Choi, J. Y.; Miezianko, R.

    2009-08-01

    Detection of unusual trajectories of moving objects can help in identifying suspicious activity on convoy routes and thus reduce casualties caused by improvised explosive devices. In this paper, using video imagery we compare efficiency of various techniques for incremental outlier detection on detecting unusual trajectories on simulated and real-life data obtained from SENSIAC database. Incremental outlier detection algorithms that we consider in this paper include incremental Support Vector Classifier (incSVC), incremental Local Outlier Factor (incLOF) algorithm and incremental Connectivity Outlier Factor (incCOF) algorithm. Our experiments performed on ground truth trajectory data indicate that incremental LOF algorithm can provide better detection of unusual trajectories in comparison to other examined techniques.

  6. A Method for Extracting Suspected Parotid Lesions in CT Images using Feature-based Segmentation and Active Contours based on Stationary Wavelet Transform

    NASA Astrophysics Data System (ADS)

    Wu, T. Y.; Lin, S. F.

    2013-10-01

    Automatic suspected lesion extraction is an important application in computer-aided diagnosis (CAD). In this paper, we propose a method to automatically extract the suspected parotid regions for clinical evaluation in head and neck CT images. The suspected lesion tissues in low contrast tissue regions can be localized with feature-based segmentation (FBS) based on local texture features, and can be delineated with accuracy by modified active contour models (ACM). At first, stationary wavelet transform (SWT) is introduced. The derived wavelet coefficients are applied to derive the local features for FBS, and to generate enhanced energy maps for ACM computation. Geometric shape features (GSFs) are proposed to analyze each soft tissue region segmented by FBS; the regions with higher similarity GSFs with the lesions are extracted and the information is also applied as the initial conditions for fine delineation computation. Consequently, the suspected lesions can be automatically localized and accurately delineated for aiding clinical diagnosis. The performance of the proposed method is evaluated by comparing with the results outlined by clinical experts. The experiments on 20 pathological CT data sets show that the true-positive (TP) rate on recognizing parotid lesions is about 94%, and the dimension accuracy of delineation results can also approach over 93%.

  7. Computer-Assisted Segmentation of Videocapsule Images Using Alpha-Divergence-Based Active Contour in the Framework of Intestinal Pathologies Detection

    PubMed Central

    Meziou, L.; Histace, A.; Precioso, F.; Romain, O.; Dray, X.; Granado, B.; Matuszewski, B. J.

    2014-01-01

    Visualization of the entire length of the gastrointestinal tract through natural orifices is a challenge for endoscopists. Videoendoscopy is currently the “gold standard” technique for diagnosis of different pathologies of the intestinal tract. Wireless capsule endoscopy (WCE) has been developed in the 1990s as an alternative to videoendoscopy to allow direct examination of the gastrointestinal tract without any need for sedation. Nevertheless, the systematic postexamination by the specialist of the 50,000 (for the small bowel) to 150,000 images (for the colon) of a complete acquisition using WCE remains time-consuming and challenging due to the poor quality of WCE images. In this paper, a semiautomatic segmentation for analysis of WCE images is proposed. Based on active contour segmentation, the proposed method introduces alpha-divergences, a flexible statistical similarity measure that gives a real flexibility to different types of gastrointestinal pathologies. Results of segmentation using the proposed approach are shown on different types of real-case examinations, from (multi)polyp(s) segmentation, to radiation enteritis delineation. PMID:25587264

  8. Computer-assisted segmentation of videocapsule images using alpha-divergence-based active contour in the framework of intestinal pathologies detection.

    PubMed

    Meziou, L; Histace, A; Precioso, F; Romain, O; Dray, X; Granado, B; Matuszewski, B J

    2014-01-01

    Visualization of the entire length of the gastrointestinal tract through natural orifices is a challenge for endoscopists. Videoendoscopy is currently the "gold standard" technique for diagnosis of different pathologies of the intestinal tract. Wireless capsule endoscopy (WCE) has been developed in the 1990s as an alternative to videoendoscopy to allow direct examination of the gastrointestinal tract without any need for sedation. Nevertheless, the systematic postexamination by the specialist of the 50,000 (for the small bowel) to 150,000 images (for the colon) of a complete acquisition using WCE remains time-consuming and challenging due to the poor quality of WCE images. In this paper, a semiautomatic segmentation for analysis of WCE images is proposed. Based on active contour segmentation, the proposed method introduces alpha-divergences, a flexible statistical similarity measure that gives a real flexibility to different types of gastrointestinal pathologies. Results of segmentation using the proposed approach are shown on different types of real-case examinations, from (multi)polyp(s) segmentation, to radiation enteritis delineation. PMID:25587264

  9. Segmentation of the endocardial wall of the left atrium using local region-based active contours and statistical shape learning

    NASA Astrophysics Data System (ADS)

    Gao, Yi; Gholami, Behnood; MacLeod, Robert S.; Blauer, Joshua; Haddad, Wassim M.; Tannenbaum, Allen R.

    2010-03-01

    Atrial fibrillation, a cardiac arrhythmia characterized by unsynchronized electrical activity in the atrial chambers of the heart, is a rapidly growing problem in modern societies. One treatment, referred to as catheter ablation, targets specific parts of the left atrium for radio frequency ablation using an intracardiac catheter. Magnetic resonance imaging has been used for both pre- and and post-ablation assessment of the atrial wall. Magnetic resonance imaging can aid in selecting the right candidate for the ablation procedure and assessing post-ablation scar formations. Image processing techniques can be used for automatic segmentation of the atrial wall, which facilitates an accurate statistical assessment of the region. As a first step towards the general solution to the computer-assisted segmentation of the left atrial wall, in this paper we use shape learning and shape-based image segmentation to identify the endocardial wall of the left atrium in the delayed-enhancement magnetic resonance images.

  10. Topologically correct reconstruction of tortuous contour forests

    PubMed Central

    Edwards, John; Bajaj, Chandrajit

    2011-01-01

    Motivated by the need for correct and robust 3D models of neuronal processes, we present a method for reconstruction of spatially realistic and topologically correct models from planar cross sections of multiple objects. Previous work in 3D reconstruction from serial contours has focused on reconstructing one object at a time, potentially producing inter-object intersections between slices. We have developed a robust algorithm that removes these intersections using a geometric approach. Our method not only removes intersections but can guarantee a given minimum separation distance between objects. This paper describes the algorithm for geometric adjustment, proves correctness, and presents several results of our high-fidelity modeling. PMID:22003256

  11. Application and histology-driven refinement of active contour models to functional region and nerve delineation: towards a digital brainstem atlas

    NASA Astrophysics Data System (ADS)

    Patel, Nirmal; Sultana, Sharmin; Rashid, Tanweer; Krusienski, Dean; Audette, Michel A.

    2015-03-01

    This paper presents a methodology for the digital formatting of a printed atlas of the brainstem and the delineation of cranial nerves from this digital atlas. It also describes on-going work on the 3D resampling and refinement of the 2D functional regions and nerve contours. In MRI-based anatomical modeling for neurosurgery planning and simulation, the complexity of the functional anatomy entails a digital atlas approach, rather than less descriptive voxel or surface-based approaches. However, there is an insufficiency of descriptive digital atlases, in particular of the brainstem. Our approach proceeds from a series of numbered, contour-based sketches coinciding with slices of the brainstem featuring both closed and open contours. The closed contours coincide with functionally relevant regions, whereby our objective is to fill in each corresponding label, which is analogous to painting numbered regions in a paint-by-numbers kit. Any open contour typically coincides with a cranial nerve. This 2D phase is needed in order to produce densely labeled regions that can be stacked to produce 3D regions, as well as identifying the embedded paths and outer attachment points of cranial nerves. Cranial nerves are modeled using an explicit contour based technique called 1-Simplex. The relevance of cranial nerves modeling of this project is two-fold: i) this atlas will fill a void left by the brain segmentation communities, as no suitable digital atlas of the brainstem exists, and ii) this atlas is necessary to make explicit the attachment points of major nerves (except I and II) having a cranial origin. Keywords: digital atlas, contour models, surface models

  12. Adaptive pseudo dilation for gestalt edge grouping and contour detection.

    PubMed

    Papari, Giuseppe; Petkov, Nicolai

    2008-10-01

    We consider the problem of detecting object contours in natural images. In many cases, local luminance changes turn out to be stronger in textured areas than on object contours. Therefore, local edge features, which only look at a small neighborhood of each pixel, cannot be reliable indicators of the presence of a contour, and some global analysis is needed. We introduce a new morphological operator, called adaptive pseudo-dilation (APD), which uses context dependent structuring elements in order to identify long curvilinear structure in the edge map. We show that grouping edge pixels as the connected components of the output of APD results in a good agreement with the gestalt law of good continuation. The novelty of this operator is that dilation is limited to the Voronoi cell of each edge pixel. An efficient implementation of APD is presented. The grouping algorithm is then embedded in a multithreshold contour detector. At each threshold level, small groups of edges are removed, and contours are completed by means of a generalized reconstruction from markers. The use of different thresholds makes the algorithm much less sensitive to the values of the input parameters. Both qualitative and quantitative comparison with existing approaches prove the superiority of the proposed contour detector in terms of larger amount of suppressed texture and more effective detection of low-contrast contours. PMID:18784041

  13. [Post bariatric body contouring.

    PubMed

    Winge, Rikke; Henriksen, Trine Foged; Printzlau, Andreas; Hülmich, Lisbet

    2014-03-17

    Post bariatric body contouring in Denmark is currently a field under development. The scope of this article is to give an overview of existing plastic surgery techniques being used to treat patients with massive weight loss, as well as the current indications for patient referral. Furthermore, we describe how to optimise the preoperative evaluation of the patient and give a brief description of potential surgical adverse effects and their prevalence. Further research can provide this field with invaluable data regarding the post-operative effects on patient rehabilitation and quality of life. PMID:25096208

  14. Thermodynamically weighted ART (THWART): a finite-temperature activated algorithm

    NASA Astrophysics Data System (ADS)

    Barkema, Gerard; Mousseau, Normand

    2004-03-01

    Much effort has been invested in the last decade to develop accelerated algorithms. Many of these methods are limited either by having to work effectively at T=0 (ART, eigenvector-following or dimer method) or by the complexity level of the system under study (hyper-MD, TAD, etc.). The thermodynamically weighted activation-relaxation technique (THWART) overcomes some of these limitations. Coupling molecular dynamics with ART, this algorithm can be shown to sample the configurational space with the correct ensemble, while generating a trajectory that can go over large activation barriers. Preliminary simulations show that the method is many orders of magnitude faster than MD for sampling the configurational space of amorphous silicon at T=800 K and small peptides at 300 K. This work is supported in part by NSERC (Canada) and FRQNT (Québec). The simulations were performed on the supercomputers of the RQCHP. NM is a Cottrell Scholar of the Research Corporation.

  15. Robot Hand Would Adapt To Contours

    NASA Technical Reports Server (NTRS)

    Collins, Earl R., Jr.

    1990-01-01

    Conceptual device uses hydraulic pressure to activate fingers. Projections on opposing fingers of proposed robot hand automatically conform to contours of object on contact. Pistons connected to common reservoir provide gentle, firm grip. Fingers communicate with each other via hydraulic pressure, without elaborate control system. Pistons move in and out, and tips slope to match contour of object. Their action tends to center object on finger. Hand used to grasp objects of various shapes and sizes. Conforming process passive; pressure of object on one or several pad elements forces other pad elements to touch it. Would not use elaborate mechanisms involving motors, cams, and cables.

  16. Breast Contour Detection with Stable Paths

    NASA Astrophysics Data System (ADS)

    Cardoso, Jaime S.; Sousa, Ricardo; Teixeira, Luís F.; Cardoso, M. J.

    Breast cancer conservative treatment (BCCT), due to its proven oncological safety, is considered, when feasible, the gold standard of breast cancer treatment. However, aesthetic results are heterogeneous and difficult to evaluate in a standardized way, due to the lack of reproducibility of the subjective methods usually applied. The objective assessment methods, considered in the past as being less capable of evaluating all aspects of BCCT, are nowadays being preferred to overcome the drawbacks of the subjective evaluation. A computer-aided medical system was recently developed to objectively and automatically evaluate the aesthetic result of BCCT. In this system, the detection of the breast contour on the patient's digital photograph is a necessary step to extract the features subsequently used in the evaluation process. In this paper an algorithm based on the shortest path on a graph is proposed to detect automatically the breast contour. The proposed method extends an existing semi-automatic algorithm for the same purpose. A comprehensive comparison with manually-drawn contours reveals the strength of the proposed method.

  17. Contour Completion Without Region Segmentation.

    PubMed

    Ming, Yansheng; Li, Hongdong; He, Xuming

    2016-08-01

    Contour completion plays an important role in visual perception, where the goal is to group fragmented low-level edge elements into perceptually coherent and salient contours. Most existing methods for contour completion have focused on pixelwise detection accuracy. In contrast, fewer methods have addressed the global contour closure effect, despite psychological evidences for its importance. This paper proposes a purely contour-based higher order CRF model to achieve contour closure, through local connectedness approximation. This leads to a simplified problem structure, where our higher order inference problem can be transformed into an integer linear program and be solved efficiently. Compared with the methods based on the same bottom-up edge detector, our method achieves a superior contour grouping ability (measured by Rand index), a comparable precision-recall performance, and more visually pleasing results. Our results suggest that contour closure can be effectively achieved in contour domain, in contrast to a popular view that segmentation is essential for this purpose. PMID:27168599

  18. Method for contour extraction for object representation

    DOEpatents

    Skourikhine, Alexei N.; Prasad, Lakshman

    2005-08-30

    Contours are extracted for representing a pixelated object in a background pixel field. An object pixel is located that is the start of a new contour for the object and identifying that pixel as the first pixel of the new contour. A first contour point is then located on the mid-point of a transition edge of the first pixel. A tracing direction from the first contour point is determined for tracing the new contour. Contour points on mid-points of pixel transition edges are sequentially located along the tracing direction until the first contour point is again encountered to complete tracing the new contour. The new contour is then added to a list of extracted contours that represent the object. The contour extraction process associates regions and contours by labeling all the contours belonging to the same object with the same label.

  19. Roads Centre-Axis Extraction in Airborne SAR Images: AN Approach Based on Active Contour Model with the Use of Semi-Automatic Seeding

    NASA Astrophysics Data System (ADS)

    Lotte, R. G.; Sant'Anna, S. J. S.; Almeida, C. M.

    2013-05-01

    Research works dealing with computational methods for roads extraction have considerably increased in the latest two decades. This procedure is usually performed on optical or microwave sensors (radar) imagery. Radar images offer advantages when compared to optical ones, for they allow the acquisition of scenes regardless of atmospheric and illumination conditions, besides the possibility of surveying regions where the terrain is hidden by the vegetation canopy, among others. The cartographic mapping based on these images is often manually accomplished, requiring considerable time and effort from the human interpreter. Maps for detecting new roads or updating the existing roads network are among the most important cartographic products to date. There are currently many studies involving the extraction of roads by means of automatic or semi-automatic approaches. Each of them presents different solutions for different problems, making this task a scientific issue still open. One of the preliminary steps for roads extraction can be the seeding of points belonging to roads, what can be done using different methods with diverse levels of automation. The identified seed points are interpolated to form the initial road network, and are hence used as an input for an extraction method properly speaking. The present work introduces an innovative hybrid method for the extraction of roads centre-axis in a synthetic aperture radar (SAR) airborne image. Initially, candidate points are fully automatically seeded using Self-Organizing Maps (SOM), followed by a pruning process based on specific metrics. The centre-axis are then detected by an open-curve active contour model (snakes). The obtained results were evaluated as to their quality with respect to completeness, correctness and redundancy.

  20. Automatic liver contouring for radiotherapy treatment planning.

    PubMed

    Li, Dengwang; Liu, Li; Kapp, Daniel S; Xing, Lei

    2015-10-01

    To develop automatic and efficient liver contouring software for planning 3D-CT and four-dimensional computed tomography (4D-CT) for application in clinical radiation therapy treatment planning systems.The algorithm comprises three steps for overcoming the challenge of similar intensities between the liver region and its surrounding tissues. First, the total variation model with the L1 norm (TV-L1), which has the characteristic of multi-scale decomposition and an edge-preserving property, is used for removing the surrounding muscles and tissues. Second, an improved level set model that contains both global and local energy functions is utilized to extract liver contour information sequentially. In the global energy function, the local correlation coefficient (LCC) is constructed based on the gray level co-occurrence matrix both of the initial liver region and the background region. The LCC can calculate the correlation of a pixel with the foreground and background regions, respectively. The LCC is combined with intensity distribution models to classify pixels during the evolutionary process of the level set based method. The obtained liver contour is used as the candidate liver region for the following step. In the third step, voxel-based texture characterization is employed for refining the liver region and obtaining the final liver contours.The proposed method was validated based on the planning CT images of a group of 25 patients undergoing radiation therapy treatment planning. These included ten lung cancer patients with normal appearing livers and ten patients with hepatocellular carcinoma or liver metastases. The method was also tested on abdominal 4D-CT images of a group of five patients with hepatocellular carcinoma or liver metastases. The false positive volume percentage, the false negative volume percentage, and the dice similarity coefficient between liver contours obtained by a developed algorithm and a current standard delineated by the expert group

  1. Automatic liver contouring for radiotherapy treatment planning

    NASA Astrophysics Data System (ADS)

    Li, Dengwang; Liu, Li; Kapp, Daniel S.; Xing, Lei

    2015-09-01

    To develop automatic and efficient liver contouring software for planning 3D-CT and four-dimensional computed tomography (4D-CT) for application in clinical radiation therapy treatment planning systems. The algorithm comprises three steps for overcoming the challenge of similar intensities between the liver region and its surrounding tissues. First, the total variation model with the L1 norm (TV-L1), which has the characteristic of multi-scale decomposition and an edge-preserving property, is used for removing the surrounding muscles and tissues. Second, an improved level set model that contains both global and local energy functions is utilized to extract liver contour information sequentially. In the global energy function, the local correlation coefficient (LCC) is constructed based on the gray level co-occurrence matrix both of the initial liver region and the background region. The LCC can calculate the correlation of a pixel with the foreground and background regions, respectively. The LCC is combined with intensity distribution models to classify pixels during the evolutionary process of the level set based method. The obtained liver contour is used as the candidate liver region for the following step. In the third step, voxel-based texture characterization is employed for refining the liver region and obtaining the final liver contours. The proposed method was validated based on the planning CT images of a group of 25 patients undergoing radiation therapy treatment planning. These included ten lung cancer patients with normal appearing livers and ten patients with hepatocellular carcinoma or liver metastases. The method was also tested on abdominal 4D-CT images of a group of five patients with hepatocellular carcinoma or liver metastases. The false positive volume percentage, the false negative volume percentage, and the dice similarity coefficient between liver contours obtained by a developed algorithm and a current standard delineated by the expert group

  2. Precision contour gage

    DOEpatents

    Bieg, Lothar F.

    1990-12-11

    An apparatus for gaging the contour of a machined part includes a rotary slide assembly, a kinematic mount to move the apparatus into and out of position for measuring the part while the part is still on the machining apparatus, a linear probe assembly with a suspension arm and a probe assembly including as probe tip for providing a measure of linear displacement of the tip on the surface of the part, a means for changing relative positions between the part and the probe tip, and a means for recording data points representing linear positions of the probe tip at prescribed rotation intervals in the position changes between the part and the probe tip.

  3. Precision contour gage

    DOEpatents

    Bieg, L.F.

    1990-12-11

    An apparatus for gaging the contour of a machined part includes a rotary slide assembly, a kinematic mount to move the apparatus into and out of position for measuring the part while the part is still on the machining apparatus, a linear probe assembly with a suspension arm and a probe assembly including as probe tip for providing a measure of linear displacement of the tip on the surface of the part, a means for changing relative positions between the part and the probe tip, and a means for recording data points representing linear positions of the probe tip at prescribed rotation intervals in the position changes between the part and the probe tip. 5 figs.

  4. Classifying Volcanic Activity Using an Empirical Decision Making Algorithm

    NASA Astrophysics Data System (ADS)

    Junek, W. N.; Jones, W. L.; Woods, M. T.

    2012-12-01

    Detection and classification of developing volcanic activity is vital to eruption forecasting. Timely information regarding an impending eruption would aid civil authorities in determining the proper response to a developing crisis. In this presentation, volcanic activity is characterized using an event tree classifier and a suite of empirical statistical models derived through logistic regression. Forecasts are reported in terms of the United States Geological Survey (USGS) volcano alert level system. The algorithm employs multidisciplinary data (e.g., seismic, GPS, InSAR) acquired by various volcano monitoring systems and source modeling information to forecast the likelihood that an eruption, with a volcanic explosivity index (VEI) > 1, will occur within a quantitatively constrained area. Logistic models are constructed from a sparse and geographically diverse dataset assembled from a collection of historic volcanic unrest episodes. Bootstrapping techniques are applied to the training data to allow for the estimation of robust logistic model coefficients. Cross validation produced a series of receiver operating characteristic (ROC) curves with areas ranging between 0.78-0.81, which indicates the algorithm has good predictive capabilities. The ROC curves also allowed for the determination of a false positive rate and optimum detection for each stage of the algorithm. Forecasts for historic volcanic unrest episodes in North America and Iceland were computed and are consistent with the actual outcome of the events.

  5. SU-E-J-129: Atlas Development for Cardiac Automatic Contouring Using Multi-Atlas Segmentation

    SciTech Connect

    Zhou, R; Yang, J; Pan, T; Milgrom, S; Pinnix, C; Shi, A; Yang, J; Liu, Y; Nguyen, Q; Gomez, D; Dabaja, B; Balter, P; Court, L; Liao, Z

    2015-06-15

    Purpose: To develop a set of atlases for automatic contouring of cardiac structures to determine heart radiation dose and the associated toxicity. Methods: Six thoracic cancer patients with both contrast and non-contrast CT images were acquired for this study. Eight radiation oncologists manually and independently delineated cardiac contours on the non-contrast CT by referring to the fused contrast CT and following the RTOG 1106 atlas contouring guideline. Fifteen regions of interest (ROIs) were delineated, including heart, four chambers, four coronary arteries, pulmonary artery and vein, inferior and superior vena cava, and ascending and descending aorta. Individual expert contours were fused using the simultaneous truth and performance level estimation (STAPLE) algorithm for each ROI and each patient. The fused contours became atlases for an in-house multi-atlas segmentation. Using leave-one-out test, we generated auto-segmented contours for each ROI and each patient. The auto-segmented contours were compared with the fused contours using the Dice similarity coefficient (DSC) and the mean surface distance (MSD). Results: Inter-observer variability was not obvious for heart, chambers, and aorta but was large for other structures that were not clearly distinguishable on CT image. The average DSC between individual expert contours and the fused contours were less than 50% for coronary arteries and pulmonary vein, and the average MSD were greater than 4.0 mm. The largest MSD of expert contours deviating from the fused contours was 2.5 cm. The mean DSC and MSD of auto-segmented contours were within one standard deviation of expert contouring variability except the right coronary artery. The coronary arteries, vena cava, and pulmonary vein had DSC<70% and MSD>3.0 mm. Conclusion: A set of cardiac atlases was created for cardiac automatic contouring, the accuracy of which was comparable to the variability in expert contouring. However, substantial modification may need

  6. Film coatings for contoured surfaces

    NASA Technical Reports Server (NTRS)

    Flanery, H. E.; Frost, R. K.; Olson, A. J.

    1981-01-01

    Thickness of fluorocarbon elastomer films applied in contoured shapes by vacuum forming is difficult to control at sharply curved areas. Process for spraying contoured fluorocarbon elastomer films of uniform strength and thickness has been used instead of vacuum forming to fabricate curtain covering external tank of Space Shuttle. Conventional spray equipment may be used.

  7. Sensory Information and Subjective Contour

    ERIC Educational Resources Information Center

    Brussell, Edward M.; And Others

    1977-01-01

    The possibility that subjective contours are an artifact of brightness contrast was explored. Concludes that subjective contour and brightness contrast are distinct perceptual phenomena but share a dependency on the processing of edge information transmitted through the achromatic channels of the visual system. (Editor/RK)

  8. MAINE CONTOUR LINES 500 FEET

    EPA Science Inventory

    MECON500 contains 500 foot contour intervals for Maine, generated from USGS 1:250,000 DEMs. Arcs are coded by elevation. Due to the nature of the source data, the positional accuracy of these contour lines varies from good to poor. Use of these data at scales of greater then 1:2...

  9. MAINE CONTOUR LINES 60 FEET

    EPA Science Inventory

    MECON60 contains contours at 60 foot intervals for the entire state of Maine as generated from USGS 1:250,000 scale digital elevation models using ARC/INFO software. Arcs are coded by elevation. Due to the nature of the source data, the positional accuracy of these contour line...

  10. A general purpose contouring system

    USGS Publications Warehouse

    Evenden, Gerald Ian

    1975-01-01

    Three Decsystem-10 FORTRAN IV programs provide a general purpose system for contouring two-dimensional data. The system can provide both quick or final, publication quality contour maps on either interactive or offline plotting devices. Complete user documentation, with examples, and program listings are presented.

  11. Contour Integration across Spatial Frequency

    ERIC Educational Resources Information Center

    Persike, Malte; Olzak, Lynn A.; Meinhardt, Gunter

    2009-01-01

    Association field models of contour integration suggest that local band-pass elements are spatially grouped to global contours within limited bands of spatial frequency (Field, Hayes, & Hess, 1993). While results for local orientation and spacing variation render support for AF models, effects of spatial frequency (SF) have rarely been addressed.…

  12. Contour detect in the medical image by shearlet transform

    NASA Astrophysics Data System (ADS)

    Cadena, Luis; Espinosa, Nikolai; Cadena, Franklin; Rios, Ramiro; Simonov, Konstantin; Romanenko, Alexey

    2015-07-01

    Contour detect in the urology medical image. The investigation algorithm FFST revealed that the contours of objects can be obtained as the sum of the coefficients shearlet transform a fixed value for the last scale and the of all possible values of the shift parameter. The results of this task using a modified algorithm FFST for data processing urology image is show. In the results of the corresponding calculations for some images and a comparison with filters Sobel and Prewitt. Shows the relevant calculations for some images and a comparison with Sobel and Prewitt filters respectively.

  13. Restoration algorithms and system performance evaluation for active imagers

    NASA Astrophysics Data System (ADS)

    Gilles, Jérôme

    2007-10-01

    This paper deals with two fields related to active imaging system. First, we begin to explore image processing algorithms to restore the artefacts like speckle, scintillation and image dancing caused by atmospheric turbulence. Next, we examine how to evaluate the performance of this kind of systems. To do this task, we propose a modified version of the german TRM3 metric which permits to get MTF-like measures. We use the database acquired during NATO-TG40 field trials to make our tests.

  14. Robust contour decomposition using a constant curvature criterion

    NASA Technical Reports Server (NTRS)

    Wuescher, Daniel M.; Boyer, Kim L.

    1991-01-01

    The problem of decomposing an extended boundary or contour into simple primitives is addressed with particular emphasis on Laplacian-of-Gaussian (LoG) zero-crossing contours. A technique is introduced for partitioning such contours into constant curvature segments. A nonlinear `blip' filter matched to the impairment signature of the curvature computation process, an overlapped voting scheme, and a sequential contiguous segment extraction mechanism are used. This technique is insensitive to reasonable changes in algorithm parameters and robust to noise and minor viewpoint-induced distortions in the contour shape, such as those encountered between stereo image pairs. The results vary smoothly with the data, and local perturbations induce only local changes in the result. Robustness and insensitivity are experimentally verified.

  15. Recognizing the authenticity of emotional expressions: F0 contour matters when you need to know

    PubMed Central

    Drolet, Matthis; Schubotz, Ricarda I.; Fischer, Julia

    2014-01-01

    Authenticity of vocal emotion expression affects emotion recognition and brain activity in the so-called Theory of Mind (ToM) network, which is implied in the ability to explain and predict behavior by attributing mental states to other individuals. Exploiting the variability of the fundamental frequency (F0 contour), which varies more (higher contour) in play-acted expressions than authentic ones, we examined whether contour biases explicit categorization toward a particular authenticity or emotion category. Moreover, we tested whether contour modulates blood-oxygen-level dependent (BOLD) response in the ToM network and explored the role of task as a top-down modulator. The effects of contour on BOLD signal were analyzed by contrasting high and low contour stimuli within two previous fMRI studies that implemented emotion and authenticity rating tasks. Participants preferentially categorized higher contour stimuli as play-acted and lower contour stimuli as sad. Higher contour was found to up-regulate activation task-independently in the primary auditory cortex. Stimulus contour and task were found to interact in a network including medial prefrontal cortex, with an increase in BOLD signal for low-contour stimuli during explicit perception of authenticity and an increase for high-contour stimuli during explicit perception of emotion. Contour-induced BOLD effects appear to be purely stimulus-driven in early auditory and intonation perception, while being strongly task-dependent in regions involved in higher cognition. PMID:24701202

  16. Brain networks supporting perceptual grouping and contour selection

    PubMed Central

    Volberg, Gregor; Greenlee, Mark W.

    2014-01-01

    The human visual system groups local elements into global objects seemingly without effort. Using a contour integration task and EEG source level analyses, we tested the hypothesis that perceptual grouping requires a top-down selection, rather than a passive pooling, of neural information that codes local elements in the visual image. The participants were presented visual displays with or without a hidden contour. Two tasks were performed: a central luminance-change detection task and a peripheral contour detection task. Only in the contour-detection task could we find differential brain activity between contour and non-contour conditions, within a distributed brain network including parietal, lateral occipital and primary visual areas. Contour processing was associated with an inflow of information from lateral occipital into primary visual regions, as revealed from the slope of phase differences between source level oscillations within these areas. The findings suggest that contour integration results from a selection of neural information from lower visual areas, and that this selection is driven by the lateral occipital cortex. PMID:24772096

  17. Automatic 4D Reconstruction of Patient-Specific Cardiac Mesh with 1-to-1 Vertex Correspondence from Segmented Contours Lines

    PubMed Central

    Lim, Chi Wan; Su, Yi; Yeo, Si Yong; Ng, Gillian Maria; Nguyen, Vinh Tan; Zhong, Liang; Tan, Ru San; Poh, Kian Keong; Chai, Ping

    2014-01-01

    We propose an automatic algorithm for the reconstruction of patient-specific cardiac mesh models with 1-to-1 vertex correspondence. In this framework, a series of 3D meshes depicting the endocardial surface of the heart at each time step is constructed, based on a set of border delineated magnetic resonance imaging (MRI) data of the whole cardiac cycle. The key contribution in this work involves a novel reconstruction technique to generate a 4D (i.e., spatial–temporal) model of the heart with 1-to-1 vertex mapping throughout the time frames. The reconstructed 3D model from the first time step is used as a base template model and then deformed to fit the segmented contours from the subsequent time steps. A method to determine a tree-based connectivity relationship is proposed to ensure robust mapping during mesh deformation. The novel feature is the ability to handle intra- and inter-frame 2D topology changes of the contours, which manifests as a series of merging and splitting of contours when the images are viewed either in a spatial or temporal sequence. Our algorithm has been tested on five acquisitions of cardiac MRI and can successfully reconstruct the full 4D heart model in around 30 minutes per subject. The generated 4D heart model conforms very well with the input segmented contours and the mesh element shape is of reasonably good quality. The work is important in the support of downstream computational simulation activities. PMID:24743555

  18. Non-contact contour gage

    DOEpatents

    Bieg, Lothar F.

    1990-12-18

    A fluid probe for measuring the surface contour of a machined part is provided whereby the machined part can remain on the machining apparatus during surface contour measurement. A measuring nozzle in a measuring probe directs a measuring fluid flow onto the surface. The measuring nozzle is on the probe situated midway between two guide nozzles that direct guide fluid flows onto the surface. When the guide fluid flows interact with the surface, they cause the measuring flow and measuring probe to be oriented perpendicular to the surface. The measuring probe includes a pressure chamber whose pressure is monitored. As the measuring fluid flow encounters changes in surface contour, pressure changes occur in the pressure chamber. The surface contour is represented as data corresponding to pressure changes in the pressure chamber as the surface is scanned.

  19. Generalized gradient and contour program

    USGS Publications Warehouse

    Hellman, Marshall Strong

    1972-01-01

    This program computes estimates of gradients, prepares contour maps, and plots various sets of data provided by the user on the CalComp plotters. The gradients represent the maximum rates of change of a real variable Z=f(X,Y) with respect to the twodimensional rectangle on which the function is defined. The contours are lines of equal Z values. The program also plots special line data sets provided by the user.

  20. A comprehensive method of contour extraction for industrial computed tomography images

    NASA Astrophysics Data System (ADS)

    Jiang, Haina; Zeng, Li; Bi, Bi

    2013-03-01

    A novel contour extraction method is presented in this paper. In reverse engineering based on industrial computed tomography, quality of extracted contours greatly influences the reverse results. As a widely used method of edge extraction, the wavelet transform modulus maximum algorithm is also employed to extract contours. It often gets results through thresholding wavelet transform coefficients and then follows it up by edge tracking. Generally, threshold affects the accuracy of edge localization, and additional edge tracking increases complexity. To overcome these shortcomings, in this paper, we present a method of contour extraction synchronizing with edge tracking but omitting the thresholding process. Firstly, wavelet transform is performed on an original gray image to get modulus matrix. Secondly, by manually clicking inside and outside of the desired contour on the original image, a starting contour point can be obtained through determination of local modulus maximum value. Thirdly, on the mask centered on the starting contour point, a next contour point can be automatically detected by searching local modulus maximum value. Then, starting from that new contour point and recursively seeking the local modulus maximum value, an occlusive contour can be correctly found. Experiments show that this method can directly extract continuous and single-pixel wide contours from gray image.

  1. Simple computer method provides contours for radiological images

    NASA Technical Reports Server (NTRS)

    Newell, J. D.; Keller, R. A.; Baily, N. A.

    1975-01-01

    Computer is provided with information concerning boundaries in total image. Gradient of each point in digitized image is calculated with aid of threshold technique; then there is invoked set of algorithms designed to reduce number of gradient elements and to retain only major ones for definition of contour.

  2. Tuning of active vibration controllers for ACTEX by genetic algorithm

    NASA Astrophysics Data System (ADS)

    Kwak, Moon K.; Denoyer, Keith K.

    1999-06-01

    This paper is concerned with the optimal tuning of digitally programmable analog controllers on the ACTEX-1 smart structures flight experiment. The programmable controllers for each channel include a third order Strain Rate Feedback (SRF) controller, a fifth order SRF controller, a second order Positive Position Feedback (PPF) controller, and a fourth order PPF controller. Optimal manual tuning of several control parameters can be a difficult task even though the closed-loop control characteristics of each controller are well known. Hence, the automatic tuning of individual control parameters using Genetic Algorithms is proposed in this paper. The optimal control parameters of each control law are obtained by imposing a constraint on the closed-loop frequency response functions using the ACTEX mathematical model. The tuned control parameters are then uploaded to the ACTEX electronic control electronics and experiments on the active vibration control are carried out in space. The experimental results on ACTEX will be presented.

  3. Basic features of low-temperature plasma formation in the course of composite coating synthesis at the active faces of complex contoured hard tools

    NASA Astrophysics Data System (ADS)

    Brzhozovsky, B. M.; Zimnyakov, D. A.; Zinina, E. P.; Martynov, V. V.; Pleshakova, E. S.; Yuvchenko, S. A.

    2016-04-01

    Basic features of combined-discharge low-temperature plasma formation around the surfaces of complex-contoured metal units are considered. It is shown that it makes the possibilities for synthesis of hardened high-durable coatings of hard tools appropriate for material processing in extreme load-temperature conditions. Experimental study of the coating formation was carried out in combination with the analysis of emission spectra of a low-temperature plasma cloud. Some practical examples of the coating applications are presented.

  4. Auto-propagation of contours for adaptive prostate radiation therapy

    NASA Astrophysics Data System (ADS)

    Chao, Ming; Xie, Yaoqin; Xing, Lei

    2008-09-01

    The purpose of this work is to develop an effective technique to automatically propagate contours from planning CT to cone beam CT (CBCT) to facilitate CBCT-guided prostate adaptive radiation therapy. Different from other disease sites, such as the lungs, the contour mapping here is complicated by two factors: (i) the physical one-to-one correspondence may not exist due to the insertion or removal of some image contents within the region of interest (ROI); and (ii) reduced contrast to noise ratio of the CBCT images due to increased scatter. To overcome these issues, we investigate a strategy of excluding the regions with variable contents by a careful design of a narrow shell signifying the contour of an ROI. For rectum, for example, a narrow shell with the delineated contours as its interior surface was constructed to avoid the adverse influence of the day-to-day content change inside the rectum on the contour mapping. The corresponding contours in the CBCT were found by warping the narrow shell through the use of BSpline deformable model. Both digital phantom experiments and clinical case testing were carried out to validate the proposed ROI mapping method. It was found that the approach was able to reliably warp the constructed narrow band with an accuracy better than 1.3 mm. For all five clinical cases enrolled in this study, the method yielded satisfactory results even when there were significant rectal content changes between the planning CT and CBCT scans. The overlapped area of the auto-mapped contours over 90% to the manually drawn contours is readily achievable. The proposed approach permits us to take advantage of the regional calculation algorithm yet avoiding the nuisance of rectum/bladder filling and provide a useful tool for adaptive radiotherapy of prostate in the future.

  5. Auto-propagation of contours for adaptive prostate radiation therapy.

    PubMed

    Chao, Ming; Xie, Yaoqin; Xing, Lei

    2008-09-01

    The purpose of this work is to develop an effective technique to automatically propagate contours from planning CT to cone beam CT (CBCT) to facilitate CBCT-guided prostate adaptive radiation therapy. Different from other disease sites, such as the lungs, the contour mapping here is complicated by two factors: (i) the physical one-to-one correspondence may not exist due to the insertion or removal of some image contents within the region of interest (ROI); and (ii) reduced contrast to noise ratio of the CBCT images due to increased scatter. To overcome these issues, we investigate a strategy of excluding the regions with variable contents by a careful design of a narrow shell signifying the contour of an ROI. For rectum, for example, a narrow shell with the delineated contours as its interior surface was constructed to avoid the adverse influence of the day-to-day content change inside the rectum on the contour mapping. The corresponding contours in the CBCT were found by warping the narrow shell through the use of BSpline deformable model. Both digital phantom experiments and clinical case testing were carried out to validate the proposed ROI mapping method. It was found that the approach was able to reliably warp the constructed narrow band with an accuracy better than 1.3 mm. For all five clinical cases enrolled in this study, the method yielded satisfactory results even when there were significant rectal content changes between the planning CT and CBCT scans. The overlapped area of the auto-mapped contours over 90% to the manually drawn contours is readily achievable. The proposed approach permits us to take advantage of the regional calculation algorithm yet avoiding the nuisance of rectum/bladder filling and provide a useful tool for adaptive radiotherapy of prostate in the future. PMID:18677041

  6. Entropy reduction via simplified image contourization

    NASA Technical Reports Server (NTRS)

    Turner, Martin J.

    1993-01-01

    The process of contourization is presented which converts a raster image into a set of plateaux or contours. These contours can be grouped into a hierarchical structure, defining total spatial inclusion, called a contour tree. A contour coder has been developed which fully describes these contours in a compact and efficient manner and is the basis for an image compression method. Simplification of the contour tree has been undertaken by merging contour tree nodes thus lowering the contour tree's entropy. This can be exploited by the contour coder to increase the image compression ratio. By applying general and simple rules derived from physiological experiments on the human vision system, lossy image compression can be achieved which minimizes noticeable artifacts in the simplified image.

  7. Multichannel active control of nonlinear noise processes using diagonal structure bilinear FXLMS algorithm

    NASA Astrophysics Data System (ADS)

    Chen, Dong; Yuan, Ding; Li, Tan; Sidan, Du

    2015-12-01

    A novel nonlinear adaptive algorithm named as diagonal structure bilinear filtered-x least mean square (DBFXLMS) for multichannel nonlinear active noise control is proposed in this paper. The performances of the proposed algorithm are shown below and the computational complexity is compared with the second-order Volterra filtered-x LMS (VFXLMS) algorithm and the filtered-s least mean square (FSLMS) algorithm, in terms of normalized mean square error (NMSE), for multichannel active control of nonlinear noise processes. Both the simulations and the computational complexity analyses demonstrate that the proposed method has an improvement as compared to the proposed algorithms.

  8. GAIA Video Processing Embedded Algorithms: Prototyping and Validation Activities

    NASA Astrophysics Data System (ADS)

    Provost, S.; Le Roy, M.; Mamdy, B.; Flandin, G.; Paulsen, T.

    2007-08-01

    GAIA is an ambitious mission of the European Space Agency (ESA) whose spacecraft is developed by EADS Astrium. Its objective is to create the largest and most precise three dimensional chart of our Galaxy by providing unprecedented positional and radial velocity measurements for about one billion stars in our Galaxy and throughout the Local Group. The Video Processing Algorithms (VPA), embedded in the Video Processing Unit (VPU), are part of the payload, dedicated to process the raw data issued from the Focal Plane Assembly, and in charge of controlling it. VPA play a major role in terms of data reduction for GAIA. It reaches an unmatched level of autonomy that has to be functionally validated, while feasible implementation proven. While earlier activities[2] had concentrated on the prototyping and high level feasibility demonstration, the VPA study now enters into a phase of systematic validation. In this frame, the VPA have been breadboarded (VPA-RTP Real-Time Prototype), to be fully representative of the final implementation. The VPA validation test bench allows the simulation of the VPU behaviour (through the VPA-RTP) and of the Focal Plane Assembly response. It allows the validation of both scientific performances and implementation performances. Preliminary results show that the associated requirements, although stringent, can be met, at the expense of a constant trade-off between robustness and implementability.

  9. Topological Cacti: Visualizing Contour-based Statistics

    SciTech Connect

    Weber, Gunther H.; Bremer, Peer-Timo; Pascucci, Valerio

    2011-05-26

    Contours, the connected components of level sets, play an important role in understanding the global structure of a scalar field. In particular their nestingbehavior and topology-often represented in form of a contour tree-have been used extensively for visualization and analysis. However, traditional contour trees onlyencode structural properties like number of contours or the nesting of contours, but little quantitative information such as volume or other statistics. Here we use thesegmentation implied by a contour tree to compute a large number of per-contour (interval) based statistics of both the function defining the contour tree as well asother co-located functions. We introduce a new visual metaphor for contour trees, called topological cacti, that extends the traditional toporrery display of acontour tree to display additional quantitative information as width of the cactus trunk and length of its spikes. We apply the new technique to scalar fields ofvarying dimension and different measures to demonstrate the effectiveness of the approach.

  10. Contour-Based Surface Reconstruction using MPU Implicit Models.

    PubMed

    Braude, Ilya; Marker, Jeffrey; Museth, Ken; Nissanov, Jonathan; Breen, David

    2007-03-01

    This paper presents a technique for creating a smooth, closed surface from a set of 2D contours, which have been extracted from a 3D scan. The technique interprets the pixels that make up the contours as points in ℝ(3) and employs Multi-level Partition of Unity (MPU) implicit models to create a surface that approximately fits to the 3D points. Since MPU implicit models additionally require surface normal information at each point, an algorithm that estimates normals from the contour data is also described. Contour data frequently contains noise from the scanning and delineation process. MPU implicit models provide a superior approach to the problem of contour-based surface reconstruction, especially in the presence of noise, because they are based on adaptive implicit functions that locally approximate the points within a controllable error bound. We demonstrate the effectiveness of our technique with a number of example datasets, providing images and error statistics generated from our results. PMID:18496609

  11. Gage for 3-d contours

    NASA Technical Reports Server (NTRS)

    Haynie, C. C.

    1980-01-01

    Simple gage, used with template, can help inspectors determine whether three-dimensional curved surface has correct contour. Gage was developed as aid in explosive forming of Space Shuttle emergency-escape hatch. For even greater accuracy, wedge can be made of metal and calibrated by indexing machine.

  12. Measuring and Plotting Surface-Contour Deviations

    NASA Technical Reports Server (NTRS)

    Aragon, Lino A.; Shuck, Thomas; Crockett, Leroy K.

    1987-01-01

    Hand-held device measures deviation of contour of surface from desired contour and provides output to x-y plotter. Carriage on device rolled along track representing desired contour, while spring-loaded stylus on device deflects perpendicularly to track to follow surface. Operator moves carriage of contour-measuring device on beamlike track. Stylus on carriage traces contour of surface above it. Carriage of measuring device holds transducer measuring cross-track displacement of surface from desired contour, and multiple-turn potentiometer measuring position along track.

  13. Application Of Moire Contour Fringes To Study Nycticebus Coucany

    NASA Astrophysics Data System (ADS)

    Ren-xiang, Zhang; Ming, Lu; Zu-yun, Lan; Wen-ji, Qu

    1984-12-01

    In this paper we have studied the moire contour fringes of the skull and femur knee joint of Nycticebus coucany and obtained the following results: 1. The skull's value K is very useful for comparative study with the different kinds of Primate. 2. The moire contour fringes of the tibia facies of knee joint is convex on one side while the other side is concave. 3. At the same condition the grade of the first moire contour fringe of connection on the femur knee joint between the two condyles and its angle β are smaller than Hylobates concolor leucongeuys. This study is significant, because: 1. The evolution of skull may be related with the increased value K. 2. The moire contour fringes of the Nycticebus coucany's tibia and femur knee joint have lower range of activity. 3. From the moire contour fringes of knee, the Nycticebus coucany and. Hylobates concolor leucongeuys are of one kind. But the moire contour Nycticebus of tibia is different form.

  14. Adjusting the Contour of Reflector Panels

    NASA Technical Reports Server (NTRS)

    Palmer, W. B.; Giebler, M. M.

    1984-01-01

    Postfabrication adjustment of contour of panels for reflector, such as parabolic reflector for radio antennas, possible with simple mechanism consisting of threaded stud, two nuts, and flexure. Contours adjusted manually.

  15. Contoured Surface Eddy Current Inspection System

    DOEpatents

    Batzinger, Thomas James; Fulton, James Paul; Rose, Curtis Wayne; Perocchi, Lee Cranford

    2003-04-08

    Eddy current inspection of a contoured surface of a workpiece is performed by forming a backing piece of flexible, resiliently yieldable material with a contoured exterior surface conforming in shape to the workpiece contoured surface. The backing piece is preferably cast in place so as to conform to the workpiece contoured surface. A flexible eddy current array probe is attached to the contoured exterior surface of the backing piece such that the probe faces the contoured surface of the workpiece to be inspected when the backing piece is disposed adjacent to the workpiece. The backing piece is then expanded volumetrically by inserting at least one shim into a slot in the backing piece to provide sufficient contact pressure between the probe and the workpiece contoured surface to enable the inspection of the workpiece contoured surface to be performed.

  16. Implementation of FFT Algorithm using DSP TMS320F28335 for Shunt Active Power Filter

    NASA Astrophysics Data System (ADS)

    Patel, Pinkal Jashvantbhai; Patel, Rajesh M.; Patel, Vinod

    2016-07-01

    This work presents simulation, analysis and experimental verification of Fast Fourier Transform (FFT) algorithm for shunt active power filter based on three-level inverter. Different types of filters can be used for elimination of harmonics in the power system. In this work, FFT algorithm for reference current generation is discussed. FFT control algorithm is verified using PSIM simulation results with DLL block and C-code. Simulation results are compared with experimental results for FFT algorithm using DSP TMS320F28335 for shunt active power filter application.

  17. The Poggendorff illusion driven by real and illusory contour: Behavioral and neural mechanisms.

    PubMed

    Shen, Lu; Zhang, Ming; Chen, Qi

    2016-05-01

    The Poggendorff illusion refers to the phenomenon that the human brain misperceives a diagonal line as being apparently misaligned once the diagonal line is interrupted by two parallel edges, and the size of illusion is negatively correlated with the angle of interception of the oblique, i.e. the sharper the oblique angle, the larger the illusion. This optical illusion can be produced by both real and illusory contour. In this fMRI study, by parametrically varying the oblique angle, we investigated the shared and specific neural mechanisms underlying the Poggendorff illusion induced by real and illusory contour. At the behavioral level, not only the real but also the illusory contours were capable of inducing significant Poggendorff illusion. The size of illusion induced by the real contour, however, was larger than that induced by the illusory contour. At the neural level, real and illusory contours commonly activated more dorsal visual areas, and the real contours specifically activated more ventral visual areas. More importantly, examinations on the parametric modulation effects of the size of illusion revealed the specific neural mechanisms underlying the Poggendorff illusion induced by the real and the illusory contours, respectively. Left precentral gyrus and right middle occipital cortex were specifically involved in the Poggendorff illusion induced by the real contour. On the other hand, bilateral intraparietal sulcus (IPS) and right lateral occipital complex (LOC) were specifically involved in the Poggendorff illusion induced by the illusory contour. Functional implications of the above findings were further discussed. PMID:26956926

  18. Computation of contour integrals on {{M}}_{0,n}

    NASA Astrophysics Data System (ADS)

    Cachazo, Freddy; Gomez, Humberto

    2016-04-01

    Contour integrals of rational functions over {{M}}_{0,n} , the moduli space of n-punctured spheres, have recently appeared at the core of the tree-level S-matrix of massless particles in arbitrary dimensions. The contour is determined by the critical points of a certain Morse function on {{M}}_{0,n} . The integrand is a general rational function of the puncture locations with poles of arbitrary order as two punctures coincide. In this note we provide an algorithm for the analytic computation of any such integral. The algorithm uses three ingredients: an operation we call general KLT, Petersen's theorem applied to the existence of a 2-factor in any 4-regular graph and Hamiltonian decompositions of certain 4-regular graphs. The procedure is iterative and reduces the computation of a general integral to that of simple building blocks. These are integrals which compute double-color-ordered partial amplitudes in a bi-adjoint cubic scalar theory.

  19. An active foot lifter orthosis based on a PCPG algorithm.

    PubMed

    Duvinage, Matthieu; Jiménez-Fábian, René; Castermans, Thierry; Verlinden, Olivier; Dutoit, Thierry

    2011-01-01

    Central pattern generators (CPGs) are known to play an important role in the generation of rhythmic movements in gait, both in animals and humans. The comprehension of their underlying mechanism has led to the development of an important family of algorithms at the basis of autonomous walking robots. Recently, it has been shown that human gait could be modeled using a subclass of those algorithms, namely a Programmable Central Pattern Generator (PCPG). In this paper, we present a foot lifter orthosis driven by this algorithm. After a learning phase, the PCPG is able to generate adequate rhythmic gait patterns both for constant speeds and acceleration phases. Its output is used to drive the orthosis actuator during the swing phase, in order to help patients suffering from foot drop (the orthosis just follows the movement during the stance phase). The most interesting property of this algorithm is the possibility to generate a smooth output signal even during speed transitions. In practice, given that human gait is not perfectly periodic, the phase of this signal needs to be reset with actual movement. Therefore, two phase-resetting procedures were studied: one standard hard phase-resetting leading to discontinuities and one original soft phase-resetting allowing to recover the correct phase in a smooth way. The simulation results and complete design of the orthosis hardware and software are presented. PMID:22275540

  20. Intonation contour in synchronous speech

    NASA Astrophysics Data System (ADS)

    Wang, Bei; Cummins, Fred

    2003-10-01

    Synchronous Speech (Syn-S), obtained by having pairs of speakers read a prepared text together, has been shown to result in interesting properties in the temporal domain, especially in the reduction of inter-speaker variability in supersegmental timing [F. Cummins, ARLO 3, 7-11 (2002)]. Here we investigate the effect of synchronization among speakers on the intonation contour, with a view to informing models of intonation. Six pairs of speakers (all females) read a short text (176 words) both synchronously and solo. Results show that (1) the pitch accent height above a declining baseline is reduced in Syn-S, compared with solo speech, while the pitch accent location is consistent across speakers in both conditions; (2) in contrast to previous findings on duration matching, there is an asymmetry between speakers, with one speaker exerting a stronger influence on the observed intonation contour than the other; (3) agreement on the boundaries of intonational phrases is greater in Syn-S and intonation contours are well matched from the first syllable of the phrase and throughout.

  1. Multiscale approach to contour fitting for MR images

    NASA Astrophysics Data System (ADS)

    Rueckert, Daniel; Burger, Peter

    1996-04-01

    We present a new multiscale contour fitting process which combines information about the image and the contour of the object at different levels of scale. The algorithm is based on energy minimizing deformable models but avoids some of the problems associated with these models. The segmentation algorithm starts by constructing a linear scale-space of an image through convolution of the original image with a Gaussian kernel at different levels of scale, where the scale corresponds to the standard deviation of the Gaussian kernel. At high levels of scale large scale features of the objects are preserved while small scale features, like object details as well as noise, are suppressed. In order to maximize the accuracy of the segmentation, the contour of the object of interest is then tracked in scale-space from coarse to fine scales. We propose a hybrid multi-temperature simulated annealing optimization to minimize the energy of the deformable model. At high levels of scale the SA optimization is started at high temperatures, enabling the SA optimization to find a global optimal solution. At lower levels of scale the SA optimization is started at lower temperatures (at the lowest level the temperature is close to 0). This enforces a more deterministic behavior of the SA optimization at lower scales and leads to an increasingly local optimization as high energy barriers cannot be crossed. The performance and robustness of the algorithm have been tested on spin-echo MR images of the cardiovascular system. The task was to segment the ascending and descending aorta in 15 datasets of different individuals in order to measure regional aortic compliance. The results show that the algorithm is able to provide more accurate segmentation results than the classic contour fitting process and is at the same time very robust to noise and initialization.

  2. Computationally efficient algorithm for high sampling-frequency operation of active noise control

    NASA Astrophysics Data System (ADS)

    Rout, Nirmal Kumar; Das, Debi Prasad; Panda, Ganapati

    2015-05-01

    In high sampling-frequency operation of active noise control (ANC) system the length of the secondary path estimate and the ANC filter are very long. This increases the computational complexity of the conventional filtered-x least mean square (FXLMS) algorithm. To reduce the computational complexity of long order ANC system using FXLMS algorithm, frequency domain block ANC algorithms have been proposed in past. These full block frequency domain ANC algorithms are associated with some disadvantages such as large block delay, quantization error due to computation of large size transforms and implementation difficulties in existing low-end DSP hardware. To overcome these shortcomings, the partitioned block ANC algorithm is newly proposed where the long length filters in ANC are divided into a number of equal partitions and suitably assembled to perform the FXLMS algorithm in the frequency domain. The complexity of this proposed frequency domain partitioned block FXLMS (FPBFXLMS) algorithm is quite reduced compared to the conventional FXLMS algorithm. It is further reduced by merging one fast Fourier transform (FFT)-inverse fast Fourier transform (IFFT) combination to derive the reduced structure FPBFXLMS (RFPBFXLMS) algorithm. Computational complexity analysis for different orders of filter and partition size are presented. Systematic computer simulations are carried out for both the proposed partitioned block ANC algorithms to show its accuracy compared to the time domain FXLMS algorithm.

  3. What is in a contour map? A region-based logical formalization of contour semantics

    USGS Publications Warehouse

    Usery, E. Lynn; Hahmann, Torsten

    2015-01-01

    This paper analyses and formalizes contour semantics in a first-order logic ontology that forms the basis for enabling computational common sense reasoning about contour information. The elicited contour semantics comprises four key concepts – contour regions, contour lines, contour values, and contour sets – and their subclasses and associated relations, which are grounded in an existing qualitative spatial ontology. All concepts and relations are illustrated and motivated by physical-geographic features identifiable on topographic contour maps. The encoding of the semantics of contour concepts in first-order logic and a derived conceptual model as basis for an OWL ontology lay the foundation for fully automated, semantically-aware qualitative and quantitative reasoning about contours.

  4. Early processing in human LOC is highly responsive to illusory contours but not to salient regions

    PubMed Central

    Shpaner, Marina; Murray, Micah M.; Foxe, John J.

    2011-01-01

    Human electrophysiological studies support a model whereby sensitivity to so-called illusory contour stimuli is first seen within the lateral occipital complex. A challenge to this model posits that the lateral occipital complex is a general site for crude region-based segmentation, based on findings of equivalent hemodynamic activations in the lateral occipital complex to illusory contour and so-called salient region stimuli, a stimulus class that lacks the classic bounding contours of illusory contours. Using high-density electrical mapping of visual evoked potentials, we show that early lateral occipital cortex activity is substantially stronger to illusory contour than to salient region stimuli, while later lateral occipital complex activity is stronger to salient region than to illusory contour stimuli. Our results suggest that equivalent hemodynamic activity to illusory contour and salient region stimuli likely reflects temporally integrated responses, a result of the poor temporal resolution of hemodynamic imaging. The temporal precision of visual evoked potentials is critical for establishing viable models of completion processes and visual scene analysis. We propose that crude spatial segmentation analyses, which are insensitive to illusory contours, occur first within dorsal visual regions, not lateral occipital complex, and that initial illusory contour sensitivity is a function of the lateral occipital complex. PMID:19895562

  5. An Active Learning Algorithm for Control of Epidural Electrostimulation.

    PubMed

    Desautels, Thomas A; Choe, Jaehoon; Gad, Parag; Nandra, Mandheerej S; Roy, Roland R; Zhong, Hui; Tai, Yu-Chong; Edgerton, V Reggie; Burdick, Joel W

    2015-10-01

    Epidural electrostimulation has shown promise for spinal cord injury therapy. However, finding effective stimuli on the multi-electrode stimulating arrays employed requires a laborious manual search of a vast space for each patient. Widespread clinical application of these techniques would be greatly facilitated by an autonomous, algorithmic system which choses stimuli to simultaneously deliver effective therapy and explore this space. We propose a method based on GP-BUCB, a Gaussian process bandit algorithm. In n = 4 spinally transected rats, we implant epidural electrode arrays and examine the algorithm's performance in selecting bipolar stimuli to elicit specified muscle responses. These responses are compared with temporally interleaved intra-animal stimulus selections by a human expert. GP-BUCB successfully controlled the spinal electrostimulation preparation in 37 testing sessions, selecting 670 stimuli. These sessions included sustained autonomous operations (ten-session duration). Delivered performance with respect to the specified metric was as good as or better than that of the human expert. Despite receiving no information as to anatomically likely locations of effective stimuli, GP-BUCB also consistently discovered such a pattern. Further, GP-BUCB was able to extrapolate from previous sessions' results to make predictions about performance in new testing sessions, while remaining sufficiently flexible to capture temporal variability. These results provide validation for applying automated stimulus selection methods to the problem of spinal cord injury therapy. PMID:25974925

  6. Human activity recognition based on feature selection in smart home using back-propagation algorithm.

    PubMed

    Fang, Hongqing; He, Lei; Si, Hao; Liu, Peng; Xie, Xiaolei

    2014-09-01

    In this paper, Back-propagation(BP) algorithm has been used to train the feed forward neural network for human activity recognition in smart home environments, and inter-class distance method for feature selection of observed motion sensor events is discussed and tested. And then, the human activity recognition performances of neural network using BP algorithm have been evaluated and compared with other probabilistic algorithms: Naïve Bayes(NB) classifier and Hidden Markov Model(HMM). The results show that different feature datasets yield different activity recognition accuracy. The selection of unsuitable feature datasets increases the computational complexity and degrades the activity recognition accuracy. Furthermore, neural network using BP algorithm has relatively better human activity recognition performances than NB classifier and HMM. PMID:25016308

  7. Neuronal oscillations form parietal/frontal networks during contour integration

    PubMed Central

    Castellano, Marta; Plöchl, Michael; Vicente, Raul; Pipa, Gordon

    2014-01-01

    The ability to integrate visual features into a global coherent percept that can be further categorized and manipulated are fundamental abilities of the neural system. While the processing of visual information involves activation of early visual cortices, the recruitment of parietal and frontal cortices has been shown to be crucial for perceptual processes. Yet is it not clear how both cortical and long-range oscillatory activity leads to the integration of visual features into a coherent percept. Here, we will investigate perceptual grouping through the analysis of a contour categorization task, where the local elements that form contour must be linked into a coherent structure, which is then further processed and manipulated to perform the categorization task. The contour formation in our visual stimulus is a dynamic process where, for the first time, visual perception of contours is disentangled from the onset of visual stimulation or from motor preparation, cognitive processes that until now have been behaviorally attached to perceptual processes. Our main finding is that, while local and long-range synchronization at several frequencies seem to be an ongoing phenomena, categorization of a contour could only be predicted through local oscillatory activity within parietal/frontal sources, which in turn, would synchronize at gamma (>30 Hz) frequency. Simultaneously, fronto-parietal beta (13–30 Hz) phase locking forms a network spanning across neural sources that are not category specific. Both long range networks, i.e., the gamma network that is category specific, and the beta network that is not category specific, are functionally distinct but spatially overlapping. Altogether, we show that a critical mechanism underlying contour categorization involves oscillatory activity within parietal/frontal cortices, as well as its synchronization across distal cortical sites. PMID:25165437

  8. Retroperitoneal Sarcoma Target Volume and Organ at Risk Contour Delineation Agreement Among NRG Sarcoma Radiation Oncologists

    SciTech Connect

    Baldini, Elizabeth H.; Abrams, Ross A.; Bosch, Walter; Roberge, David; Haas, Rick L.M.; Catton, Charles N.; Indelicato, Daniel J.; Olsen, Jeffrey R.; Deville, Curtiland; Chen, Yen-Lin; Finkelstein, Steven E.; DeLaney, Thomas F.; Wang, Dian

    2015-08-01

    Purpose: The purpose of this study was to evaluate the variability in target volume and organ at risk (OAR) contour delineation for retroperitoneal sarcoma (RPS) among 12 sarcoma radiation oncologists. Methods and Materials: Radiation planning computed tomography (CT) scans for 2 cases of RPS were distributed among 12 sarcoma radiation oncologists with instructions for contouring gross tumor volume (GTV), clinical target volume (CTV), high-risk CTV (HR CTV: area judged to be at high risk of resulting in positive margins after resection), and OARs: bowel bag, small bowel, colon, stomach, and duodenum. Analysis of contour agreement was performed using the simultaneous truth and performance level estimation (STAPLE) algorithm and kappa statistics. Results: Ten radiation oncologists contoured both RPS cases, 1 contoured only RPS1, and 1 contoured only RPS2 such that each case was contoured by 11 radiation oncologists. The first case (RPS 1) was a patient with a de-differentiated (DD) liposarcoma (LPS) with a predominant well-differentiated (WD) component, and the second case (RPS 2) was a patient with DD LPS made up almost entirely of a DD component. Contouring agreement for GTV and CTV contours was high. However, the agreement for HR CTVs was only moderate. For OARs, agreement for stomach, bowel bag, small bowel, and colon was high, but agreement for duodenum (distorted by tumor in one of these cases) was fair to moderate. Conclusions: For preoperative treatment of RPS, sarcoma radiation oncologists contoured GTV, CTV, and most OARs with a high level of agreement. HR CTV contours were more variable. Further clarification of this volume with the help of sarcoma surgical oncologists is necessary to reach consensus. More attention to delineation of the duodenum is also needed.

  9. Shape from equal thickness contours

    SciTech Connect

    Cong, G.; Parvin, B.

    1998-05-10

    A unique imaging modality based on Equal Thickness Contours (ETC) has introduced a new opportunity for 3D shape reconstruction from multiple views. We present a computational framework for representing each view of an object in terms of its object thickness, and then integrating these representations into a 3D surface by algebraic reconstruction. The object thickness is inferred by grouping curve segments that correspond to points of second derivative maxima. At each step of the process, we use some form of regularization to ensure closeness to the original features, as well as neighborhood continuity. We apply our approach to images of a sub-micron crystal structure obtained through a holographic process.

  10. Active mass damper system employing time delay control algorithm for vibration mitigation of building structure

    NASA Astrophysics Data System (ADS)

    Jang, Dong-Doo; Park, Jeongsu; Jung, Hyung-Jo

    2013-04-01

    The feasibility of an active mass damper (AMD) system employing the time delay control (TDC) algorithm, which is one of the robust and adaptive control algorithms, for effectively suppressing the wind-induced vibration of a building structure is investigated. The TDC algorithm has several attractive features such as the simplicity and the excellent robustness to unknown system dynamics and disturbance. Based on the characteristics of the algorithm, it has the potential to be an effective control system for mitigating excessive vibration of civil engineering structures such as buildings, bridges and towers. However, it has not been used for structural response reduction yet. In order to verify the effectiveness of the proposed active control method combining an AMD system with the TDC algorithm, a series of labscale tests are carried out.

  11. Application of a modified gradient lease squares algorithm to an adaptive, actively quenched, sound field system

    SciTech Connect

    Belyakov, A.A.; Mal`tsev, A.A.; Medvedev, S.Yu.

    1995-04-01

    A modified least squares algorithm, preventing the overflow of the discharge grid of weight coefficients of an adaptive transverse filter and guaranteeing stable system operation, is suggested for the tuning of an adaptive system of an actively quenched sound field. Experimental results are provided for an adaptive filter with a modified algorithm in a system of several harmonic components of an actively quenched sound field.

  12. Status report: Data management program algorithm evaluation activity at Marshall Space Flight Center

    NASA Technical Reports Server (NTRS)

    Jayroe, R. R., Jr.

    1977-01-01

    An algorithm evaluation activity was initiated to study the problems associated with image processing by assessing the independent and interdependent effects of registration, compression, and classification techniques on LANDSAT data for several discipline applications. The objective of the activity was to make recommendations on selected applicable image processing algorithms in terms of accuracy, cost, and timeliness or to propose alternative ways of processing the data. As a means of accomplishing this objective, an Image Coding Panel was established. The conduct of the algorithm evaluation is described.

  13. Brightness alteration with interweaving contours

    PubMed Central

    Roncato, Sergio

    2012-01-01

    Chromatic induction is observed whenever the perceived colour of a target surface shifts towards the hue of a neighbouring surface. Some vivid manifestations may be seen in a white background where thin coloured lines have been drawn (assimilation) or when lines of different colours are collinear (neon effect) or adjacent (watercolour) to each other. This study examines a particular colour induction that manifests in concomitance with an opposite effect of colour saturation (or anti-spread). The two phenomena can be observed when a repetitive pattern is drawn in which outline thin contours intercept wider contours or surfaces, colour spreading appear to fill the surface occupied by surfaces or thick lines whereas the background traversed by thin lines is seen as brighter or filled of a saturated white. These phenomena were first observed by Bozzi (1975) and Kanizsa (1979) in figural conditions that did not allow them to document their conjunction. Here we illustrate various manifestations of this twofold phenomenon and compare its effects with the known effects of brightness and colour induction. Some conjectures on the nature of these effects are discussed. PMID:23483806

  14. Antenna surface contour control system

    NASA Technical Reports Server (NTRS)

    Ahl, Elvin L. (Inventor); Miller, James B. (Inventor)

    1989-01-01

    The invention is a system for automatically controlling the surface contour of a deployable and restowable antenna having a mesh reflector surface supported by a circular, folding hoop affixed to a central, telescoping column. The antenna, when deployed, forms a quad-aperture reflector with each quadrant of the mesh surface shaped to provide an offset parabolic radio frequency (RF) reflector. The hoop is supported and positioned by quartz support cords attached to the top of a column and by lower graphite hoop control cords that extend between the hoop and base of the column. The antenna, an RF reflective surface, is a gold plated molybdenum wire mesh supported on a graphite cord truss structure that includes the hoop control cords and a plurality of surface control cords attached at selected points on the surface and to the base of the column. The contour of the three-dimensional surface of the antenna is controlled by selectively adjusting the lengths of the surface control cords and the graphite hoop control cords by means of novel actuator assemblies that automatically sense and change the lengths of the lower hoop control cords and surface control cords.

  15. Projection moire for remote contour analysis

    NASA Technical Reports Server (NTRS)

    Doty, J. L.

    1983-01-01

    Remote projection and viewing of moire contours are examined analytically for a system employing separate projection and viewing optics, with specific attention paid to the practical limitations imposed by the optical systems. It is found that planar contours are possible only when the optics are telecentric (exit pupil at infinity) but that the requirement for spatial separability of the contour fringes from extraneous fringes is independent of the specific optics and is a function only of the angle separating the two optic axes. In the nontelecentric case, the contour separation near the object is unchanged from that of the telecentric case, although the contours are distorted into low-eccentricity (near-circular) ellipses. Furthermore, the minimum contour spacing is directly related to the depth of focus through the resolution of the optics.

  16. Effects of activity and energy budget balancing algorithm on laboratory performance of a fish bioenergetics model

    USGS Publications Warehouse

    Madenjian, Charles P.; David, Solomon R.; Pothoven, Steven A.

    2012-01-01

    We evaluated the performance of the Wisconsin bioenergetics model for lake trout Salvelinus namaycush that were fed ad libitum in laboratory tanks under regimes of low activity and high activity. In addition, we compared model performance under two different model algorithms: (1) balancing the lake trout energy budget on day t based on lake trout energy density on day t and (2) balancing the lake trout energy budget on day t based on lake trout energy density on day t + 1. Results indicated that the model significantly underestimated consumption for both inactive and active lake trout when algorithm 1 was used and that the degree of underestimation was similar for the two activity levels. In contrast, model performance substantially improved when using algorithm 2, as no detectable bias was found in model predictions of consumption for inactive fish and only a slight degree of overestimation was detected for active fish. The energy budget was accurately balanced by using algorithm 2 but not by using algorithm 1. Based on the results of this study, we recommend the use of algorithm 2 to estimate food consumption by fish in the field. Our study results highlight the importance of accurately accounting for changes in fish energy density when balancing the energy budget; furthermore, these results have implications for the science of evaluating fish bioenergetics model performance and for more accurate estimation of food consumption by fish in the field when fish energy density undergoes relatively rapid changes.

  17. Contouring variability of human- and deformable-generated contours in radiotherapy for prostate cancer

    NASA Astrophysics Data System (ADS)

    Gardner, Stephen J.; Wen, Ning; Kim, Jinkoo; Liu, Chang; Pradhan, Deepak; Aref, Ibrahim; Cattaneo, Richard, II; Vance, Sean; Movsas, Benjamin; Chetty, Indrin J.; Elshaikh, Mohamed A.

    2015-06-01

    This study was designed to evaluate contouring variability of human-and deformable-generated contours on planning CT (PCT) and CBCT for ten patients with low-or intermediate-risk prostate cancer. For each patient in this study, five radiation oncologists contoured the prostate, bladder, and rectum, on one PCT dataset and five CBCT datasets. Consensus contours were generated using the STAPLE method in the CERR software package. Observer contours were compared to consensus contour, and contour metrics (Dice coefficient, Hausdorff distance, Contour Distance, Center-of-Mass [COM] Deviation) were calculated. In addition, the first day CBCT was registered to subsequent CBCT fractions (CBCTn: CBCT2-CBCT5) via B-spline Deformable Image Registration (DIR). Contours were transferred from CBCT1 to CBCTn via the deformation field, and contour metrics were calculated through comparison with consensus contours generated from human contour set. The average contour metrics for prostate contours on PCT and CBCT were as follows: Dice coefficient—0.892 (PCT), 0.872 (CBCT-Human), 0.824 (CBCT-Deformed); Hausdorff distance—4.75 mm (PCT), 5.22 mm (CBCT-Human), 5.94 mm (CBCT-Deformed); Contour Distance (overall contour)—1.41 mm (PCT), 1.66 mm (CBCT-Human), 2.30 mm (CBCT-Deformed); COM Deviation—2.01 mm (PCT), 2.78 mm (CBCT-Human), 3.45 mm (CBCT-Deformed). For human contours on PCT and CBCT, the difference in average Dice coefficient between PCT and CBCT (approx. 2%) and Hausdorff distance (approx. 0.5 mm) was small compared to the variation between observers for each patient (standard deviation in Dice coefficient of 5% and Hausdorff distance of 2.0 mm). However, additional contouring variation was found for the deformable-generated contours (approximately 5.0% decrease in Dice coefficient and 0.7 mm increase in Hausdorff distance relative to human-generated contours on CBCT). Though deformable contours provide a reasonable starting point for contouring on

  18. Contoured insulation window for evacuated solar collector

    SciTech Connect

    Coppola, F. T.; Lentz, W. P.; Vandewoestine, R. V.

    1980-02-05

    An insulating contoured window is provided for use with an enclosed chamber such as an evacuated flat plate solar heat collector with the contoured solar window being of minimum thickness and supported solely about its peripheral edge portions. The window is contoured in both its longitudinal and transverse directions, such that in its longitudinal direction the window is composed of a plurality of sinusoidal corrugations whereas in its transverse direction the peaks of such corrugations are contoured in the form of paraboloids so that the structure may withstand the forces generated thereon by the atmosphere.

  19. SEM-contour shape analysis method for advanced semiconductor devices

    NASA Astrophysics Data System (ADS)

    Toyoda, Yasutaka; Shindo, Hiroyuki; Ota, Yoshihiro; Matsuoka, Ryoichi; Hojo, Yutaka; Fuchimoto, Daisuke; Hibino, Daisuke; Sakai, Hideo

    2013-04-01

    The new measuring method that we developed executes a contour shape analysis that is based on the pattern edge information from a SEM image. This analysis helps to create a highly precise quantification of every circuit pattern shape by comparing the contour extracted from the SEM image using a CD measurement algorithm and the ideal circuit pattern. The developed method, in the next phase, can generate four shape indices by using the analysis mass measurement data. When the shape index measured using the developed method is compared the CD, the difference of the shape index and the CD is negligibly small for the quantification of the circuit pattern shape. In addition, when the 2D patterns on a FEM wafer are measured using the developed method, the tendency for shape deformations is precisely caught by the four shape indices. This new method and the evaluation results will be presented in detail in this paper.

  20. Creation of digital contours that approach the characteristics of cartographic contours

    USGS Publications Warehouse

    Tyler, Dean J.; Greenlee, Susan K.

    2012-01-01

    The capability to easily create digital contours using commercial off-the-shelf (COTS) software has existed for decades. Out-of-the-box raw contours are suitable for many scientific applications without pre- or post-processing; however, cartographic applications typically require additional improvements. For example, raw contours generally require smoothing before placement on a map. Cartographic contours must also conform to certain spatial/logical rules; for example, contours may not cross waterbodies. The objective was to create contours that match as closely as possible the cartographic contours produced by manual methods on the 1:24,000-scale, 7.5-minute Topographic Map series. This report outlines the basic approach, describes a variety of problems that were encountered, and discusses solutions. Many of the challenges described herein were the result of imperfect input raster elevation data and the requirement to have the contours integrated with hydrographic features from the National Hydrography Dataset (NHD).

  1. Body Contouring After Bariatric Surgery.

    PubMed

    Ellison, Jo M; Steffen, Kristine J; Sarwer, David B

    2015-11-01

    Individuals who undergo bariatric surgery generally experience rapid and dramatic weight loss. While the weight loss typically confers significant health benefits, an undesirable consequence is often excessive quantities of hanging, surplus skin. Some patients undergo body-contouring surgery (BCS) in order to improve health, mobility, appearance and psychological adjustment. While the majority of post-bariatric patients desire BCS in one or more body regions, a small percentage of patients receive such surgeries. Lack of knowledge about procedures, cost and (in the USA and several other countries) difficulty obtaining insurance reimbursement likely prevents many patients from undergoing BCS. Those who do undergo BCS appear to be at heightened risk for wound-healing complications. Despite these complications, the majority of patients report satisfactory BCS outcomes. The extant literature in this area provides a great deal of information about these issues; nevertheless, additional research is needed to further inform clinical management and improve patient outcomes. PMID:26395601

  2. Sodium Deoxycholate for Submental Contouring.

    PubMed

    Humphrey, S; Beleznay, K; Beleznay, J D A

    2016-09-01

    The chin and jaw line are integral parts of an individual's aesthetic profile, and the presence of submental fat detracts from this and can lead to displeasure with one's facial appearance. While liposuction and cosmetic surgery are regarded as the gold standard in treating submental fat, surgical intervention is not appealing to all patients and has potential surgical complications including longer recovery, and contour irregularities. Despite ample advances in aesthetic medicine to enhance the appearance of the face, very little is available in non-invasive options to reduce submental fat that has been supported by robust evidence. ATX-101, a proprietary formulation of deoxycholic acid that is synthetically derived, has been extensively explored in a vigorous clinical development program that has established the safety and efficacy of the injectable. It has recently received approval by regulatory authorities in Canada (Belkyra™) and the US (Kybella®) for the treatment of submental fat. PMID:27603325

  3. Cortical Contributions to Impaired Contour Integration in Schizophrenia

    PubMed Central

    Silverstein, Steven M.; Harms, Michael P.; Carter, Cameron S.; Gold, James M.; Keane, Brian P.; MacDonald, Angus; Ragland, J. Daniel; Barch, Deanna M.

    2015-01-01

    Objectives Visual perceptual organization impairments in schizophrenia (SCZ) are well established, but their neurobiological bases are not. The current study used the previously validated Jittered Orientation Visual Integration (JOVI) task, along with fMRI, to examine the neural basis of contour integration (CI), and its impairment in SCZ. CI is an aspect of perceptual organization in which multiple distinct oriented elements are grouped into a single continuous boundary or shape. Methods On the JOVI, five levels of orientational jitter were added to non-contiguous closed contour elements embedded in background noise to progressively increase the difficulty in perceiving contour elements as left- or right-pointing ovals. Multi-site fMRI data were analyzed for 56 healthy control subjects and 47 people with SCZ. Results SCZ patients demonstrated poorer CI, and this was associated with increased activation in regions involved in global shape processing and visual attention, namely the lateral occipital complex and superior parietal lobules. There were no brain regions where controls demonstrated more activation than patients. Conclusions CI impairment in this sample of outpatients with SCZ was related to excessive activation in regions associated with object processing and allocation of visual-spatial attention. There was no evidence for basic impairments in contour element linking in the fMRI data. The latter may be limited to poor outcome patients, where more extensive structural and functional changes in the occipital lobe have been observed. PMID:26160288

  4. An Optimal CDS Construction Algorithm with Activity Scheduling in Ad Hoc Networks.

    PubMed

    Penumalli, Chakradhar; Palanichamy, Yogesh

    2015-01-01

    A new energy efficient optimal Connected Dominating Set (CDS) algorithm with activity scheduling for mobile ad hoc networks (MANETs) is proposed. This algorithm achieves energy efficiency by minimizing the Broadcast Storm Problem [BSP] and at the same time considering the node's remaining energy. The Connected Dominating Set is widely used as a virtual backbone or spine in mobile ad hoc networks [MANETs] or Wireless Sensor Networks [WSN]. The CDS of a graph representing a network has a significant impact on an efficient design of routing protocol in wireless networks. Here the CDS is a distributed algorithm with activity scheduling based on unit disk graph [UDG]. The node's mobility and residual energy (RE) are considered as parameters in the construction of stable optimal energy efficient CDS. The performance is evaluated at various node densities, various transmission ranges, and mobility rates. The theoretical analysis and simulation results of this algorithm are also presented which yield better results. PMID:26221627

  5. Active-passive correlation spectroscopy - A new technique for identifying ocean color algorithm spectral regions

    NASA Technical Reports Server (NTRS)

    Hoge, F. E.; Swift, R. N.

    1986-01-01

    A new active-passive airborne data correlation technique has been developed which allows the validation of existing in-water oceoan color algorithms and the rapid search, identification, and evaluation of new sensor band locations and algorithm wavelength intervals. Thus far, applied only in conjunction with the spectral curvature algorithm (SCA), the active-passive correlation spectroscopy (APCS) technique shows that (1) the usual 490-nm (center-band) chlorophyll SCA could satisfactorily be placed anywhere within the nominal 460-510-nm interval, and (2) two other spectral regions, 645-660 and 680-695 nm, show considerable promise for chlorophyll pigment measurement. Additionally, the APCS method reveals potentially useful wavelength regions (at 600 and about 670 nm) of very low chlorophyll-in-water spectral curvature into which accessory pigment algorithms for phycoerythrin might be carefully positioned. In combination, the APCS and SCA methods strongly suggest that significant information content resides within the seemingly featureless ocean color spectrum.

  6. An Optimal CDS Construction Algorithm with Activity Scheduling in Ad Hoc Networks

    PubMed Central

    Penumalli, Chakradhar; Palanichamy, Yogesh

    2015-01-01

    A new energy efficient optimal Connected Dominating Set (CDS) algorithm with activity scheduling for mobile ad hoc networks (MANETs) is proposed. This algorithm achieves energy efficiency by minimizing the Broadcast Storm Problem [BSP] and at the same time considering the node's remaining energy. The Connected Dominating Set is widely used as a virtual backbone or spine in mobile ad hoc networks [MANETs] or Wireless Sensor Networks [WSN]. The CDS of a graph representing a network has a significant impact on an efficient design of routing protocol in wireless networks. Here the CDS is a distributed algorithm with activity scheduling based on unit disk graph [UDG]. The node's mobility and residual energy (RE) are considered as parameters in the construction of stable optimal energy efficient CDS. The performance is evaluated at various node densities, various transmission ranges, and mobility rates. The theoretical analysis and simulation results of this algorithm are also presented which yield better results. PMID:26221627

  7. Genetic Algorithm Calibration of Probabilistic Cellular Automata for Modeling Mining Permit Activity

    USGS Publications Warehouse

    Louis, S.J.; Raines, G.L.

    2003-01-01

    We use a genetic algorithm to calibrate a spatially and temporally resolved cellular automata to model mining activity on public land in Idaho and western Montana. The genetic algorithm searches through a space of transition rule parameters of a two dimensional cellular automata model to find rule parameters that fit observed mining activity data. Previous work by one of the authors in calibrating the cellular automaton took weeks - the genetic algorithm takes a day and produces rules leading to about the same (or better) fit to observed data. These preliminary results indicate that genetic algorithms are a viable tool in calibrating cellular automata for this application. Experience gained during the calibration of this cellular automata suggests that mineral resource information is a critical factor in the quality of the results. With automated calibration, further refinements of how the mineral-resource information is provided to the cellular automaton will probably improve our model.

  8. Discourse-level contours in Nehiyawewin

    NASA Astrophysics Data System (ADS)

    Muehlbauer, Jeff; Cook, Clare

    2005-04-01

    This study describes declination and discourse-sized intonation contours in Nehiyawewin, an Algonquian language whose pitch and intonation systems have not been previously studied. The study draws on 270 min of recordings of two female Nehiyaw elders telling their life stories to another Nehiyawewin native speaker. Data is analyzed by using Praat's default algorithm to generate f0 curves for each breath group. Preliminary results indicate: (1) When breath-group internal pitch peaks are considered, an obvious downward trend of f0 occurred in fewer than half the breath groups analyzed (about 40% or 37/90). This raises questions about the role of classical declination in natural discourse [Umeda, Journal of Phonetics 10 (1982)]. (2) When we abstract away from declination within a breath group by computing mean f0 and mean pitch peak for each breath group and tracking trends for these means, larger patterns seem to emerge; breath groups can be grouped into larger units based on raising and lowering trends. These units have a mean peak range of 150 Hz with a 30 Hz change from one breath group to the next and correspond to a domain of around five clauses (about 3-4 breath groups, about 45 syllables).

  9. Interval and Contour Processing in Autism

    ERIC Educational Resources Information Center

    Heaton, Pamela

    2005-01-01

    High functioning children with autism and age and intelligence matched controls participated in experiments testing perception of pitch intervals and musical contours. The finding from the interval study showed superior detection of pitch direction over small pitch distances in the autism group. On the test of contour discrimination no group…

  10. Tongue Motion Averaging from Contour Sequences

    ERIC Educational Resources Information Center

    Li, Min; Kambhamettu, Chandra; Stone, Maureen

    2005-01-01

    In this paper, a method to get the best representation of a speech motion from several repetitions is presented. Each repetition is a representation of the same speech captured at different times by sequence of ultrasound images and is composed of a set of 2D spatio-temporal contours. These 2D contours in different repetitions are time aligned…

  11. Auditory and Visual Similarity of Pitch Contours.

    ERIC Educational Resources Information Center

    Hermes, Dik J.

    1998-01-01

    In two experiments, five phoneticians rated the dissimilarity of two pitch contours to investigate whether important audible differences would correspond with visually conspicuous differences between displayed pitch contours. Results indicate that visual feedback may be very effective in intonation training if auditorily relevant features of pitch…

  12. Measuring the Perceptual Similarity of Pitch Contours.

    ERIC Educational Resources Information Center

    Hermes, Dik J.

    1998-01-01

    This study investigated the effectiveness of four different methods for measuring the similarity of pitch contours. The correlation coefficient between two normalized contours was the best method; however, if pitch range is important, the mean distance and the root-mean-square distance should be considered first in automatic training in…

  13. Contour advection with surgery: A technique for investigating finescale structure in tracer transport

    NASA Technical Reports Server (NTRS)

    Waugh, Darryn W.; Plumb, R. Alan

    1994-01-01

    We present a trajectory technique, contour advection with surgery (CAS), for tracing the evolution of material contours in a specified (including observed) evolving flow. CAS uses the algorithms developed by Dritschel for contour dynamics/surgery to trace the evolution of specified contours. The contours are represented by a series of particles, which are advected by a specified, gridded, wind distribution. The resolution of the contours is preserved by continually adjusting the number of particles, and finescale features are produced that are not present in the input data (and cannot easily be generated using standard trajectory techniques). The reliability, and dependence on the spatial and temporal resolution of the wind field, of the CAS procedure is examined by comparisons with high-resolution numerical data (from contour dynamics calculations and from a general circulation model), and with routine stratospheric analyses. These comparisons show that the large-scale motions dominate the deformation field and that CAS can accurately reproduce small scales from low-resolution wind fields. The CAS technique therefore enables examination of atmospheric tracer transport at previously unattainable resolution.

  14. Environmental Monitoring Networks Optimization Using Advanced Active Learning Algorithms

    NASA Astrophysics Data System (ADS)

    Kanevski, Mikhail; Volpi, Michele; Copa, Loris

    2010-05-01

    The problem of environmental monitoring networks optimization (MNO) belongs to one of the basic and fundamental tasks in spatio-temporal data collection, analysis, and modeling. There are several approaches to this problem, which can be considered as a design or redesign of monitoring network by applying some optimization criteria. The most developed and widespread methods are based on geostatistics (family of kriging models, conditional stochastic simulations). In geostatistics the variance is mainly used as an optimization criterion which has some advantages and drawbacks. In the present research we study an application of advanced techniques following from the statistical learning theory (SLT) - support vector machines (SVM) and the optimization of monitoring networks when dealing with a classification problem (data are discrete values/classes: hydrogeological units, soil types, pollution decision levels, etc.) is considered. SVM is a universal nonlinear modeling tool for classification problems in high dimensional spaces. The SVM solution is maximizing the decision boundary between classes and has a good generalization property for noisy data. The sparse solution of SVM is based on support vectors - data which contribute to the solution with nonzero weights. Fundamentally the MNO for classification problems can be considered as a task of selecting new measurement points which increase the quality of spatial classification and reduce the testing error (error on new independent measurements). In SLT this is a typical problem of active learning - a selection of the new unlabelled points which efficiently reduce the testing error. A classical approach (margin sampling) to active learning is to sample the points closest to the classification boundary. This solution is suboptimal when points (or generally the dataset) are redundant for the same class. In the present research we propose and study two new advanced methods of active learning adapted to the solution of

  15. Experimental evaluation of leaky least-mean-square algorithms for active noise reduction in communication headsets

    NASA Astrophysics Data System (ADS)

    Cartes, David A.; Ray, Laura R.; Collier, Robert D.

    2002-04-01

    An adaptive leaky normalized least-mean-square (NLMS) algorithm has been developed to optimize stability and performance of active noise cancellation systems. The research addresses LMS filter performance issues related to insufficient excitation, nonstationary noise fields, and time-varying signal-to-noise ratio. The adaptive leaky NLMS algorithm is based on a Lyapunov tuning approach in which three candidate algorithms, each of which is a function of the instantaneous measured reference input, measurement noise variance, and filter length, are shown to provide varying degrees of tradeoff between stability and noise reduction performance. Each algorithm is evaluated experimentally for reduction of low frequency noise in communication headsets, and stability and noise reduction performance are compared with that of traditional NLMS and fixed-leakage NLMS algorithms. Acoustic measurements are made in a specially designed acoustic test cell which is based on the original work of Ryan et al. [``Enclosure for low frequency assessment of active noise reducing circumaural headsets and hearing protection,'' Can. Acoust. 21, 19-20 (1993)] and which provides a highly controlled and uniform acoustic environment. The stability and performance of the active noise reduction system, including a prototype communication headset, are investigated for a variety of noise sources ranging from stationary tonal noise to highly nonstationary measured F-16 aircraft noise over a 20 dB dynamic range. Results demonstrate significant improvements in stability of Lyapunov-tuned LMS algorithms over traditional leaky or nonleaky normalized algorithms, while providing noise reduction performance equivalent to that of the NLMS algorithm for idealized noise fields.

  16. Experimental evaluation of leaky least-mean-square algorithms for active noise reduction in communication headsets.

    PubMed

    Cartes, David A; Ray, Laura R; Collier, Robert D

    2002-04-01

    An adaptive leaky normalized least-mean-square (NLMS) algorithm has been developed to optimize stability and performance of active noise cancellation systems. The research addresses LMS filter performance issues related to insufficient excitation, nonstationary noise fields, and time-varying signal-to-noise ratio. The adaptive leaky NLMS algorithm is based on a Lyapunov tuning approach in which three candidate algorithms, each of which is a function of the instantaneous measured reference input, measurement noise variance, and filter length, are shown to provide varying degrees of tradeoff between stability and noise reduction performance. Each algorithm is evaluated experimentally for reduction of low frequency noise in communication headsets, and stability and noise reduction performance are compared with that of traditional NLMS and fixed-leakage NLMS algorithms. Acoustic measurements are made in a specially designed acoustic test cell which is based on the original work of Ryan et al. ["Enclosure for low frequency assessment of active noise reducing circumaural headsets and hearing protection," Can. Acoust. 21, 19-20 (1993)] and which provides a highly controlled and uniform acoustic environment. The stability and performance of the active noise reduction system, including a prototype communication headset, are investigated for a variety of noise sources ranging from stationary tonal noise to highly nonstationary measured F-16 aircraft noise over a 20 dB dynamic range. Results demonstrate significant improvements in stability of Lyapunov-tuned LMS algorithms over traditional leaky or nonleaky normalized algorithms, while providing noise reduction performance equivalent to that of the NLMS algorithm for idealized noise fields. PMID:12002860

  17. Ciliary motility activity measurement using a dense optical flow algorithm.

    PubMed

    Parrilla, Eduardo; Armengot, Miguel; Mata, Manuel; Cortijo, Julio; Riera, Jaime; Hueso, José L; Moratal, David

    2013-01-01

    Persistent respiratory syncytial virus (RSV) infections have been associated with the exacerbation of chronic inflammatory diseases, including chronic obstructive pulmonary disease (COPD). This virus infects the respiratory epithelium, leading to chronic inflammation, and induces the release of mucins and the loss of cilia activity, two factors that determine mucus clearance and the increase in sputum volume. In this study, an automatic method has been established to determine the ciliary motility activity from cell cultures by means of optical flow computation, and has been applied to 136 control cultures and to 144 RSV-infected cultures. The control group presented an average of cell surface with cilia motility per field of 41 ± 15 % (mean ± standard deviation), while the infected group presented a 11 ± 5 %, t-Student p<0.001. The cutoff value to classify a infected specimen was <17.89 % (sensitivity 0.94, specificity 0.93). This methodology has proved to be a robust technique to evaluate cilia motility in cell cultures. PMID:24110720

  18. Interactive segmentation of tongue contours in ultrasound video sequences using quality maps

    NASA Astrophysics Data System (ADS)

    Ghrenassia, Sarah; Ménard, Lucie; Laporte, Catherine

    2014-03-01

    Ultrasound (US) imaging is an effective and non invasive way of studying the tongue motions involved in normal and pathological speech, and the results of US studies are of interest for the development of new strategies in speech therapy. State-of-the-art tongue shape analysis techniques based on US images depend on semi-automated tongue segmentation and tracking techniques. Recent work has mostly focused on improving the accuracy of the tracking techniques themselves. However, occasional errors remain inevitable, regardless of the technique used, and the tongue tracking process must thus be supervised by a speech scientist who will correct these errors manually or semi-automatically. This paper proposes an interactive framework to facilitate this process. In this framework, the user is guided towards potentially problematic portions of the US image sequence by a segmentation quality map that is based on the normalized energy of an active contour model and automatically produced during tracking. When a problematic segmentation is identified, corrections to the segmented contour can be made on one image and propagated both forward and backward in the problematic subsequence, thereby improving the user experience. The interactive tools were tested in combination with two different tracking algorithms. Preliminary results illustrate the potential of the proposed framework, suggesting that the proposed framework generally improves user interaction time, with little change in segmentation repeatability.

  19. Automated identification of the lung contours in positron emission tomography

    NASA Astrophysics Data System (ADS)

    Nery, F.; Silvestre Silva, J.; Ferreira, N. C.; Caramelo, F. J.; Faustino, R.

    2013-03-01

    Positron Emission Tomography (PET) is a nuclear medicine imaging technique that permits to analyze, in three dimensions, the physiological processes in vivo. One of the areas where PET has demonstrated its advantages is in the staging of lung cancer, where it offers better sensitivity and specificity than other techniques such as CT. On the other hand, accurate segmentation, an important procedure for Computer Aided Diagnostics (CAD) and automated image analysis, is a challenging task given the low spatial resolution and the high noise that are intrinsic characteristics of PET images. This work presents an algorithm for the segmentation of lungs in PET images, to be used in CAD and group analysis in a large patient database. The lung boundaries are automatically extracted from a PET volume through the application of a marker-driven watershed segmentation procedure which is robust to the noise. In order to test the effectiveness of the proposed method, we compared the segmentation results in several slices using our approach with the results obtained from manual delineation. The manual delineation was performed by nuclear medicine physicians that used a software routine that we developed specifically for this task. To quantify the similarity between the contours obtained from the two methods, we used figures of merit based on region and also on contour definitions. Results show that the performance of the algorithm was similar to the performance of human physicians. Additionally, we found that the algorithm-physician agreement is similar (statistically significant) to the inter-physician agreement.

  20. Assessing Activity Pattern Similarity with Multidimensional Sequence Alignment based on a Multiobjective Optimization Evolutionary Algorithm

    PubMed Central

    Kwan, Mei-Po; Xiao, Ningchuan; Ding, Guoxiang

    2015-01-01

    Due to the complexity and multidimensional characteristics of human activities, assessing the similarity of human activity patterns and classifying individuals with similar patterns remains highly challenging. This paper presents a new and unique methodology for evaluating the similarity among individual activity patterns. It conceptualizes multidimensional sequence alignment (MDSA) as a multiobjective optimization problem, and solves this problem with an evolutionary algorithm. The study utilizes sequence alignment to code multiple facets of human activities into multidimensional sequences, and to treat similarity assessment as a multiobjective optimization problem that aims to minimize the alignment cost for all dimensions simultaneously. A multiobjective optimization evolutionary algorithm (MOEA) is used to generate a diverse set of optimal or near-optimal alignment solutions. Evolutionary operators are specifically designed for this problem, and a local search method also is incorporated to improve the search ability of the algorithm. We demonstrate the effectiveness of our method by comparing it with a popular existing method called ClustalG using a set of 50 sequences. The results indicate that our method outperforms the existing method for most of our selected cases. The multiobjective evolutionary algorithm presented in this paper provides an effective approach for assessing activity pattern similarity, and a foundation for identifying distinctive groups of individuals with similar activity patterns. PMID:26190858

  1. Statistical Modeling Approach to Quantitative Analysis of Interobserver Variability in Breast Contouring

    SciTech Connect

    Yang, Jinzhong; Woodward, Wendy A.; Reed, Valerie K.; Strom, Eric A.; Perkins, George H.; Tereffe, Welela; Buchholz, Thomas A.; Zhang, Lifei; Balter, Peter; Court, Laurence E.; Li, X. Allen; Dong, Lei

    2014-05-01

    Purpose: To develop a new approach for interobserver variability analysis. Methods and Materials: Eight radiation oncologists specializing in breast cancer radiation therapy delineated a patient's left breast “from scratch” and from a template that was generated using deformable image registration. Three of the radiation oncologists had previously received training in Radiation Therapy Oncology Group consensus contouring for breast cancer atlas. The simultaneous truth and performance level estimation algorithm was applied to the 8 contours delineated “from scratch” to produce a group consensus contour. Individual Jaccard scores were fitted to a beta distribution model. We also applied this analysis to 2 or more patients, which were contoured by 9 breast radiation oncologists from 8 institutions. Results: The beta distribution model had a mean of 86.2%, standard deviation (SD) of ±5.9%, a skewness of −0.7, and excess kurtosis of 0.55, exemplifying broad interobserver variability. The 3 RTOG-trained physicians had higher agreement scores than average, indicating that their contours were close to the group consensus contour. One physician had high sensitivity but lower specificity than the others, which implies that this physician tended to contour a structure larger than those of the others. Two other physicians had low sensitivity but specificity similar to the others, which implies that they tended to contour a structure smaller than the others. With this information, they could adjust their contouring practice to be more consistent with others if desired. When contouring from the template, the beta distribution model had a mean of 92.3%, SD ± 3.4%, skewness of −0.79, and excess kurtosis of 0.83, which indicated a much better consistency among individual contours. Similar results were obtained for the analysis of 2 additional patients. Conclusions: The proposed statistical approach was able to measure interobserver variability quantitatively and to

  2. Efficient localization of synchronous EEG source activities using a modified RAP-MUSIC algorithm.

    PubMed

    Liu, Hesheng; Schimpf, Paul H

    2006-04-01

    Synchronization across different brain regions is suggested to be a possible mechanism for functional integration. Noninvasive analysis of the synchronization among cortical areas is possible if the electrical sources can be estimated by solving the electroencephalography inverse problem. Among various inverse algorithms, spatio-temporal dipole fitting methods such as RAP-MUSIC and R-MUSIC have demonstrated superior ability in the localization of a restricted number of independent sources, and also have the ability to reliably reproduce temporal waveforms. However, these algorithms experience difficulty in reconstructing multiple correlated sources. Accurate reconstruction of correlated brain activities is critical in synchronization analysis. In this study, we modified the well-known inverse algorithm RAP-MUSIC to a multistage process which analyzes the correlation of candidate sources and searches for independent topographies (ITs) among precorrelated groups. Comparative studies were carried out on both simulated data and clinical seizure data. The results demonstrated superior performance with the modified algorithm compared to the original RAP-MUSIC in recovering synchronous sources and localizing the epileptiform activity. The modified RAP-MUSIC algorithm, thus, has potential in neurological applications involving significant synchronous brain activities. PMID:16602571

  3. Hybrid OPC modeling with SEM contour technique for 10nm node process

    NASA Astrophysics Data System (ADS)

    Hitomi, Keiichiro; Halle, Scott; Miller, Marshal; Graur, Ioana; Saulnier, Nicole; Dunn, Derren; Okai, Nobuhiro; Hotta, Shoji; Yamaguchi, Atsuko; Komuro, Hitoshi; Ishimoto, Toru; Koshihara, Shunsuke; Hojo, Yutaka

    2014-03-01

    Hybrid OPC modeling is investigated using both CDs from 1D and simple 2D structures and contours extracted from complex 2D structures, which are obtained by a Critical Dimension-Scanning Electron Microscope (CD-SEM). Recent studies have addressed some of key issues needed for the implementation of contour extraction, including an edge detection algorithm consistent with conventional CD measurements, contour averaging and contour alignment. Firstly, pattern contours obtained from CD-SEM images were used to complement traditional site driven CD metrology for the calibration of OPC models for both metal and contact layers of 10 nm-node logic device, developed in Albany Nano-Tech. The accuracy of hybrid OPC model was compared with that of conventional OPC model, which was created with only CD data. Accuracy of the model, defined as total error root-mean-square (RMS), was improved by 23% with the use of hybrid OPC modeling for contact layer and 18% for metal layer, respectively. Pattern specific benefit of hybrid modeling was also examined. Resist shrink correction was applied to contours extracted from CD-SEM images in order to improve accuracy of the contours, and shrink corrected contours were used for OPC modeling. The accuracy of OPC model with shrink correction was compared with that without shrink correction, and total error RMS was decreased by 0.2nm (12%) with shrink correction technique. Variation of model accuracy among 8 modeling runs with different model calibration patterns was reduced by applying shrink correction. The shrink correction of contours can improve accuracy and stability of OPC model.

  4. Determination of the absolute contours of optical flats

    NASA Technical Reports Server (NTRS)

    Primak, W.

    1969-01-01

    Emersons procedure is used to determine true absolute contours of optical flats. Absolute contours of standard flats are determined and a comparison is then made between standard and unknown flats. Contour differences are determined by deviation of Fizeau fringe.

  5. Differential contribution of early visual areas to the perceptual process of contour processing.

    PubMed

    Schira, Mark M; Fahle, Manfred; Donner, Tobias H; Kraft, Antje; Brandt, Stephan A

    2004-04-01

    We investigated contour processing and figure-ground detection within human retinotopic areas using event-related functional magnetic resonance imaging (fMRI) in 6 healthy and naïve subjects. A figure (6 degrees side length) was created by a 2nd-order texture contour. An independent and demanding foveal letter-discrimination task prevented subjects from noticing this more peripheral contour stimulus. The contour subdivided our stimulus into a figure and a ground. Using localizers and retinotopic mapping stimuli we were able to subdivide each early visual area into 3 eccentricity regions corresponding to 1) the central figure, 2) the area along the contour, and 3) the background. In these subregions we investigated the hemodynamic responses to our stimuli and compared responses with or without the contour defining the figure. No contour-related blood oxygenation level-dependent modulation in early visual areas V1, V3, VP, and MT+ was found. Significant signal modulation in the contour subregions of V2v, V2d, V3a, and LO occurred. This activation pattern was different from comparable studies, which might be attributable to the letter-discrimination task reducing confounding attentional modulation. In V3a, but not in any other retinotopic area, signal modulation corresponding to the central figure could be detected. Such contextual modulation will be discussed in light of the recurrent processing hypothesis and the role of visual awareness. PMID:14668291

  6. User Activity Recognition in Smart Homes Using Pattern Clustering Applied to Temporal ANN Algorithm.

    PubMed

    Bourobou, Serge Thomas Mickala; Yoo, Younghwan

    2015-01-01

    This paper discusses the possibility of recognizing and predicting user activities in the IoT (Internet of Things) based smart environment. The activity recognition is usually done through two steps: activity pattern clustering and activity type decision. Although many related works have been suggested, they had some limited performance because they focused only on one part between the two steps. This paper tries to find the best combination of a pattern clustering method and an activity decision algorithm among various existing works. For the first step, in order to classify so varied and complex user activities, we use a relevant and efficient unsupervised learning method called the K-pattern clustering algorithm. In the second step, the training of smart environment for recognizing and predicting user activities inside his/her personal space is done by utilizing the artificial neural network based on the Allen's temporal relations. The experimental results show that our combined method provides the higher recognition accuracy for various activities, as compared with other data mining classification algorithms. Furthermore, it is more appropriate for a dynamic environment like an IoT based smart home. PMID:26007738

  7. User Activity Recognition in Smart Homes Using Pattern Clustering Applied to Temporal ANN Algorithm

    PubMed Central

    Bourobou, Serge Thomas Mickala; Yoo, Younghwan

    2015-01-01

    This paper discusses the possibility of recognizing and predicting user activities in the IoT (Internet of Things) based smart environment. The activity recognition is usually done through two steps: activity pattern clustering and activity type decision. Although many related works have been suggested, they had some limited performance because they focused only on one part between the two steps. This paper tries to find the best combination of a pattern clustering method and an activity decision algorithm among various existing works. For the first step, in order to classify so varied and complex user activities, we use a relevant and efficient unsupervised learning method called the K-pattern clustering algorithm. In the second step, the training of smart environment for recognizing and predicting user activities inside his/her personal space is done by utilizing the artificial neural network based on the Allen’s temporal relations. The experimental results show that our combined method provides the higher recognition accuracy for various activities, as compared with other data mining classification algorithms. Furthermore, it is more appropriate for a dynamic environment like an IoT based smart home. PMID:26007738

  8. Aquarius geophysical model function and combined active passive algorithm for ocean surface salinity and wind retrieval

    NASA Astrophysics Data System (ADS)

    Yueh, Simon; Tang, Wenqing; Fore, Alexander; Hayashi, Akiko; Song, Yuhe T.; Lagerloef, Gary

    2014-08-01

    This paper describes the updated Combined Active-Passive (CAP) retrieval algorithm for simultaneous retrieval of surface salinity and wind from Aquarius' brightness temperature and radar backscatter. Unlike the algorithm developed by Remote Sensing Systems (RSS), implemented in the Aquarius Data Processing System (ADPS) to produce Aquarius standard products, the Jet Propulsion Laboratory's CAP algorithm does not require monthly climatology SSS maps for the salinity retrieval. Furthermore, the ADPS-RSS algorithm fully uses the National Center for Environmental Predictions (NCEP) wind for data correction, while the CAP algorithm uses the NCEP wind only as a constraint. The major updates to the CAP algorithm include the galactic reflection correction, Faraday rotation, Antenna Pattern Correction, and geophysical model functions of wind or wave impacts. Recognizing the limitation of geometric optics scattering, we improve the modeling of the reflection of galactic radiation; the results are better salinity accuracy and significantly reduced ascending-descending bias. We assess the accuracy of CAP's salinity by comparison with ARGO monthly gridded salinity products provided by the Asia-Pacific Data-Research Center (APDRC) and Japan Agency for Marine-Earth Science and Technology (JAMSTEC). The RMS differences between Aquarius CAP and APDRC's or JAMSTEC's ARGO salinities are less than 0.2 psu for most parts of the ocean, except for the regions in the Intertropical Convergence Zone, near the outflow of major rivers and at high latitudes.

  9. Reliability and Validity of Bilateral Ankle Accelerometer Algorithms for Activity Recognition and Walking Speed After Stroke

    PubMed Central

    Dobkin, Bruce H.; Xu, Xiaoyu; Batalin, Maxim; Thomas, Seth; Kaiser, William

    2015-01-01

    Background and Purpose Outcome measures of mobility for large stroke trials are limited to timed walks for short distances in a laboratory, step counters and ordinal scales of disability and quality of life. Continuous monitoring and outcome measurements of the type and quantity of activity in the community would provide direct data about daily performance, including compliance with exercise and skills practice during routine care and clinical trials. Methods Twelve adults with impaired ambulation from hemiparetic stroke and 6 healthy controls wore triaxial accelerometers on their ankles. Walking speed for repeated outdoor walks was determined by machine-learning algorithms and compared to a stopwatch calculation of speed for distances not known to the algorithm. The reliability of recognizing walking, exercise, and cycling by the algorithms was compared to activity logs. Results A high correlation was found between stopwatch-measured outdoor walking speed and algorithm-calculated speed (Pearson coefficient, 0.98; P=0.001) and for repeated measures of algorithm-derived walking speed (P=0.01). Bouts of walking >5 steps, variations in walking speed, cycling, stair climbing, and leg exercises were correctly identified during a day in the community. Compared to healthy subjects, those with stroke were, as expected, more sedentary and slower, and their gait revealed high paretic-to-unaffected leg swing ratios. Conclusions Test–retest reliability and concurrent and construct validity are high for activity pattern-recognition Bayesian algorithms developed from inertial sensors. This ratio scale data can provide real-world monitoring and outcome measurements of lower extremity activities and walking speed for stroke and rehabilitation studies. PMID:21636815

  10. Extreme_SeaState_Contour_v1

    2015-10-19

    This software generates environmental contours of extreme sea states using buoy observations of significant wave height and energy period or peak period. The code transforms these observations using principal component analysis (PCA) to create an uncorrelated representation of the data. The subsequent components are modeled using probability distributions and parameter fitting functions. The inverse first-order reliability method (I-FORM) is then applied to these models in order to generate an extreme event contour based on amore » given return period (i.e., 100 years).The subsequent contour is then transformed back into the original input space defined by the variables of interest in order to create an environmental contour of extreme sea states.« less

  11. Extreme_SeaState_Contour_v1

    SciTech Connect

    2015-10-19

    This software generates environmental contours of extreme sea states using buoy observations of significant wave height and energy period or peak period. The code transforms these observations using principal component analysis (PCA) to create an uncorrelated representation of the data. The subsequent components are modeled using probability distributions and parameter fitting functions. The inverse first-order reliability method (I-FORM) is then applied to these models in order to generate an extreme event contour based on a given return period (i.e., 100 years).The subsequent contour is then transformed back into the original input space defined by the variables of interest in order to create an environmental contour of extreme sea states.

  12. Holding fixture for variable-contour parts

    NASA Technical Reports Server (NTRS)

    Haynie, C. C.; Packer, P. N.; Zebus, P. P.

    1979-01-01

    Array of vacuum cups on spindles holds parts for safe machining and other processings. Variable-contour part resting on fixture is held firmly enough for machining, coating, or other mechanical treatment.

  13. Rapid pedobarographic image registration based on contour curvature and optimization.

    PubMed

    Oliveira, Francisco P M; Tavares, João Manuel R S; Pataky, Todd C

    2009-11-13

    Image registration, the process of optimally aligning homologous structures in multiple images, has recently been demonstrated to support automated pixel-level analysis of pedobarographic images and, subsequently, to extract unique and biomechanically relevant information from plantar pressure data. Recent registration methods have focused on robustness, with slow but globally powerful algorithms. In this paper, we present an alternative registration approach that affords both speed and accuracy, with the goal of making pedobarographic image registration more practical for near-real-time laboratory and clinical applications. The current algorithm first extracts centroid-based curvature trajectories from pressure image contours, and then optimally matches these curvature profiles using optimization based on dynamic programming. Special cases of disconnected images (that occur in high-arched subjects, for example) are dealt with by introducing an artificial spatially linear bridge between adjacent image clusters. Two registration algorithms were developed: a 'geometric' algorithm, which exclusively matched geometry, and a 'hybrid' algorithm, which performed subsequent pseudo-optimization. After testing the two algorithms on 30 control image pairs considered in a previous study, we found that, when compared with previously published results, the hybrid algorithm improved overlap ratio (p=0.010), but both current algorithms had slightly higher mean-squared error, assumedly because they did not consider pixel intensity. Nonetheless, both algorithms greatly improved the computational efficiency (25+/-8 and 53+/-9 ms per image pair for geometric and hybrid registrations, respectively). These results imply that registration-based pixel-level pressure image analyses can, eventually, be implemented for practical clinical purposes. PMID:19647829

  14. Isolating contour information from arbitrary images

    NASA Technical Reports Server (NTRS)

    Jobson, Daniel J.

    1989-01-01

    Aspects of natural vision (physiological and perceptual) serve as a basis for attempting the development of a general processing scheme for contour extraction. Contour information is assumed to be central to visual recognition skills. While the scheme must be regarded as highly preliminary, initial results do compare favorably with the visual perception of structure. The scheme pays special attention to the construction of a smallest scale circular difference-of-Gaussian (DOG) convolution, calibration of multiscale edge detection thresholds with the visual perception of grayscale boundaries, and contour/texture discrimination methods derived from fundamental assumptions of connectivity and the characteristics of printed text. Contour information is required to fall between a minimum connectivity limit and maximum regional spatial density limit at each scale. Results support the idea that contour information, in images possessing good image quality, is (centered at about 10 cyc/deg and 30 cyc/deg). Further, lower spatial frequency channels appear to play a major role only in contour extraction from images with serious global image defects.

  15. Surgical correction of postliposuction contour irregularities.

    PubMed

    Chang, K N

    1994-07-01

    The surgical correction of postliposuction contour irregularities and the results are presented. Postliposuction contour irregularities are classified as major or minor according to the size of the area, severity of the irregularity, difficulty of the correction, visual impact, and the need for dermolipectomy. Methods of correction include (1) liposuction of the area of protuberance, (2) liposuction around the area of depression, (3) simultaneous fat grafting, and (4) dermolipectomy. Results of 22 patients with 43 areas of postliposuction contour irregularities were analyzed. Follow-up ranged from 1 to 4.8 years (mean 2.1 +/- 1.0 years). All patients had corrective liposuction except one, who required medial thigh dermolipectomy. Fat grafting was performed in 19 areas in 9 patients. Average number of operations performed was 1.4 per patient (range 1 to 3). Of 17 areas of minor postliposuction contour irregularities, 8 (47 percent) were improved and 8 (47 percent) were corrected. Of 26 areas of major postliposuction contour irregularities, 17 (65 percent) were improved and 8 (31 percent) were corrected. Of all 43 areas, 25 (58 percent) were improved and 16 (37 percent) were corrected. Overcorrection in two areas (4.7 percent) resulted in minor depressions in 2 patients. Results from 5 patients are presented. In summary, postliposuction contour irregularities were treated with various surgical techniques with a high rate of improvement or correction. PMID:8016225

  16. Contours identification of elements in a cone beam computed tomography for investigating maxillary cysts

    NASA Astrophysics Data System (ADS)

    Chioran, Doina; Nicoarǎ, Adrian; Roşu, Şerban; Cǎrligeriu, Virgil; Ianeş, Emilia

    2013-10-01

    Digital processing of two-dimensional cone beam computer tomography slicesstarts by identification of the contour of elements within. This paper deals with the collective work of specialists in medicine and applied mathematics in computer science on elaborating and implementation of algorithms in dental 2D imagery.

  17. Measuring localization performance of super-resolution algorithms on very active samples.

    PubMed

    Wolter, Steve; Endesfelder, Ulrike; van de Linde, Sebastian; Heilemann, Mike; Sauer, Markus

    2011-04-11

    Super-resolution fluorescence imaging based on single-molecule localization relies critically on the availability of efficient processing algorithms to distinguish, identify, and localize emissions of single fluorophores. In multiple current applications, such as three-dimensional, time-resolved or cluster imaging, high densities of fluorophore emissions are common. Here, we provide an analytic tool to test the performance and quality of localization microscopy algorithms and demonstrate that common algorithms encounter difficulties for samples with high fluorophore density. We demonstrate that, for typical single-molecule localization microscopy methods such as dSTORM and the commonly used rapidSTORM scheme, computational precision limits the acceptable density of concurrently active fluorophores to 0.6 per square micrometer and that the number of successfully localized fluorophores per frame is limited to 0.2 per square micrometer. PMID:21503016

  18. Two-stage neural algorithm for defect detection and characterization uses an active thermography

    NASA Astrophysics Data System (ADS)

    Dudzik, Sebastian

    2015-07-01

    In the paper a two-stage neural algorithm for defect detection and characterization is presented. In order to estimate the defect depth two neural networks trained on data obtained using an active thermography were employed. The first stage of the algorithm is developed to detect the defect by a classification neural network. Then the defects depth is estimated using a regressive neural network. In this work the results of experimental investigations and simulations are shown. Further, the sensitivity analysis of the presented algorithm was conducted and the impacts of emissivity error and the ambient temperature error on the depth estimation errors were studied. The results were obtained using a test sample made of material with a low thermal diffusivity.

  19. Better-than-the-best fusion algorithm with application in human activity recognition

    NASA Astrophysics Data System (ADS)

    Najjar, Nayeff; Gupta, Shalabh

    2015-05-01

    This paper introduces the Better-than-the-Best Fusion (BB-Fus) algorithm. The BB-Fus algorithm is a simple and effective information fusion algorithm that combines the information from different sources (be it sensors, features or classifiers) to improve the Correct Classification Rate (CCR). It can be observed that in most classification problems, different sensors or features might have different classification accuracies in separating different classes. Therefore, this paper constructs an optimal decision tree that isolates one class at a time with the best sensor to separate that particular class. The paper shows that the decision tree improves the overall CCR as compared to the use of any single sensor or feature for any 3-class classification problem. The efficiency of the BB-Fus algorithm is validated on the Opportunity data set to solve the human activity recognition problem where a set of 56 sensors (including a localization system, accelerometers, inertial measurement units and magnetic sensors mounted on various body parts; besides, accelerometers and gyroscopes mounted on different objects) are used. The CCR resulting from the BB-Fus algorithm is 96% while the best sensor achieved 94% CCR.

  20. Efficient parallel implementation of active appearance model fitting algorithm on GPU.

    PubMed

    Wang, Jinwei; Ma, Xirong; Zhu, Yuanping; Sun, Jizhou

    2014-01-01

    The active appearance model (AAM) is one of the most powerful model-based object detecting and tracking methods which has been widely used in various situations. However, the high-dimensional texture representation causes very time-consuming computations, which makes the AAM difficult to apply to real-time systems. The emergence of modern graphics processing units (GPUs) that feature a many-core, fine-grained parallel architecture provides new and promising solutions to overcome the computational challenge. In this paper, we propose an efficient parallel implementation of the AAM fitting algorithm on GPUs. Our design idea is fine grain parallelism in which we distribute the texture data of the AAM, in pixels, to thousands of parallel GPU threads for processing, which makes the algorithm fit better into the GPU architecture. We implement our algorithm using the compute unified device architecture (CUDA) on the Nvidia's GTX 650 GPU, which has the latest Kepler architecture. To compare the performance of our algorithm with different data sizes, we built sixteen face AAM models of different dimensional textures. The experiment results show that our parallel AAM fitting algorithm can achieve real-time performance for videos even on very high-dimensional textures. PMID:24723812

  1. Efficient Parallel Implementation of Active Appearance Model Fitting Algorithm on GPU

    PubMed Central

    Wang, Jinwei; Ma, Xirong; Zhu, Yuanping; Sun, Jizhou

    2014-01-01

    The active appearance model (AAM) is one of the most powerful model-based object detecting and tracking methods which has been widely used in various situations. However, the high-dimensional texture representation causes very time-consuming computations, which makes the AAM difficult to apply to real-time systems. The emergence of modern graphics processing units (GPUs) that feature a many-core, fine-grained parallel architecture provides new and promising solutions to overcome the computational challenge. In this paper, we propose an efficient parallel implementation of the AAM fitting algorithm on GPUs. Our design idea is fine grain parallelism in which we distribute the texture data of the AAM, in pixels, to thousands of parallel GPU threads for processing, which makes the algorithm fit better into the GPU architecture. We implement our algorithm using the compute unified device architecture (CUDA) on the Nvidia's GTX 650 GPU, which has the latest Kepler architecture. To compare the performance of our algorithm with different data sizes, we built sixteen face AAM models of different dimensional textures. The experiment results show that our parallel AAM fitting algorithm can achieve real-time performance for videos even on very high-dimensional textures. PMID:24723812

  2. An Improved Snake Model for Refinement of Lidar-Derived Building Roof Contours Using Aerial Images

    NASA Astrophysics Data System (ADS)

    Chen, Qi; Wang, Shugen; Liu, Xiuguo

    2016-06-01

    Building roof contours are considered as very important geometric data, which have been widely applied in many fields, including but not limited to urban planning, land investigation, change detection and military reconnaissance. Currently, the demand on building contours at a finer scale (especially in urban areas) has been raised in a growing number of studies such as urban environment quality assessment, urban sprawl monitoring and urban air pollution modelling. LiDAR is known as an effective means of acquiring 3D roof points with high elevation accuracy. However, the precision of the building contour obtained from LiDAR data is restricted by its relatively low scanning resolution. With the use of the texture information from high-resolution imagery, the precision can be improved. In this study, an improved snake model is proposed to refine the initial building contours extracted from LiDAR. First, an improved snake model is constructed with the constraints of the deviation angle, image gradient, and area. Then, the nodes of the contour are moved in a certain range to find the best optimized result using greedy algorithm. Considering both precision and efficiency, the candidate shift positions of the contour nodes are constrained, and the searching strategy for the candidate nodes is explicitly designed. The experiments on three datasets indicate that the proposed method for building contour refinement is effective and feasible. The average quality index is improved from 91.66% to 93.34%. The statistics of the evaluation results for every single building demonstrated that 77.0% of the total number of contours is updated with higher quality index.

  3. Automated extraction and classification of time-frequency contours in humpback vocalizations.

    PubMed

    Ou, Hui; Au, Whitlow W L; Zurk, Lisa M; Lammers, Marc O

    2013-01-01

    A time-frequency contour extraction and classification algorithm was created to analyze humpback whale vocalizations. The algorithm automatically extracted contours of whale vocalization units by searching for gray-level discontinuities in the spectrogram images. The unit-to-unit similarity was quantified by cross-correlating the contour lines. A library of distinctive humpback units was then generated by applying an unsupervised, cluster-based learning algorithm. The purpose of this study was to provide a fast and automated feature selection tool to describe the vocal signatures of animal groups. This approach could benefit a variety of applications such as species description, identification, and evolution of song structures. The algorithm was tested on humpback whale song data recorded at various locations in Hawaii from 2002 to 2003. Results presented in this paper showed low probability of false alarm (0%-4%) under noisy environments with small boat vessels and snapping shrimp. The classification algorithm was tested on a controlled set of 30 units forming six unit types, and all the units were correctly classified. In a case study on humpback data collected in the Auau Chanel, Hawaii, in 2002, the algorithm extracted 951 units, which were classified into 12 distinctive types. PMID:23297903

  4. Communication: Active space decomposition with multiple sites: Density matrix renormalization group algorithm

    SciTech Connect

    Parker, Shane M.; Shiozaki, Toru

    2014-12-07

    We extend the active space decomposition method, recently developed by us, to more than two active sites using the density matrix renormalization group algorithm. The fragment wave functions are described by complete or restricted active-space wave functions. Numerical results are shown on a benzene pentamer and a perylene diimide trimer. It is found that the truncation errors in our method decrease almost exponentially with respect to the number of renormalization states M, allowing for numerically exact calculations (to a few μE{sub h} or less) with M = 128 in both cases. This rapid convergence is because the renormalization steps are used only for the interfragment electron correlation.

  5. Human recognition based on head-shoulder contour extraction and BP neural network

    NASA Astrophysics Data System (ADS)

    Kong, Xiao-fang; Wang, Xiu-qin; Gu, Guohua; Chen, Qian; Qian, Wei-xian

    2014-11-01

    In practical application scenarios like video surveillance and human-computer interaction, human body movements are uncertain because the human body is a non-rigid object. Based on the fact that the head-shoulder part of human body can be less affected by the movement, and will seldom be obscured by other objects, in human detection and recognition, a head-shoulder model with its stable characteristics can be applied as a detection feature to describe the human body. In order to extract the head-shoulder contour accurately, a head-shoulder model establish method with combination of edge detection and the mean-shift algorithm in image clustering has been proposed in this paper. First, an adaptive method of mixture Gaussian background update has been used to extract targets from the video sequence. Second, edge detection has been used to extract the contour of moving objects, and the mean-shift algorithm has been combined to cluster parts of target's contour. Third, the head-shoulder model can be established, according to the width and height ratio of human head-shoulder combined with the projection histogram of the binary image, and the eigenvectors of the head-shoulder contour can be acquired. Finally, the relationship between head-shoulder contour eigenvectors and the moving objects will be formed by the training of back-propagation (BP) neural network classifier, and the human head-shoulder model can be clustered for human detection and recognition. Experiments have shown that the method combined with edge detection and mean-shift algorithm proposed in this paper can extract the complete head-shoulder contour, with low calculating complexity and high efficiency.

  6. Prostate Contouring Variation: Can It Be Fixed?

    SciTech Connect

    Khoo, Eric L.H.; Schick, Karlissa; Plank, Ashley W.; Poulsen, Michael; Wong, Winnie W.G.; Middleton, Mark; Martin, Jarad M.

    2012-04-01

    Purpose: To assess whether an education program on CT and MRI prostate anatomy would reduce inter- and intraobserver prostate contouring variation among experienced radiation oncologists. Methods and Materials: Three patient CT and MRI datasets were selected. Five radiation oncologists contoured the prostate for each patient on CT first, then MRI, and again between 2 and 4 weeks later. Three education sessions were then conducted. The same contouring process was then repeated with the same datasets and oncologists. The observer variation was assessed according to changes in the ratio of the encompassing volume to intersecting volume (volume ratio [VR]), across sets of target volumes. Results: For interobserver variation, there was a 15% reduction in mean VR with CT, from 2.74 to 2.33, and a 40% reduction in mean VR with MRI, from 2.38 to 1.41 after education. A similar trend was found for intraobserver variation, with a mean VR reduction for CT and MRI of 9% (from 1.51 to 1.38) and 16% (from 1.37 to 1.15), respectively. Conclusion: A well-structured education program has reduced both inter- and intraobserver prostate contouring variations. The impact was greater on MRI than on CT. With the ongoing incorporation of new technologies into routine practice, education programs for target contouring should be incorporated as part of the continuing medical education of radiation oncologists.

  7. A comparison of two adaptive algorithms for the control of active engine mounts

    NASA Astrophysics Data System (ADS)

    Hillis, A. J.; Harrison, A. J. L.; Stoten, D. P.

    2005-08-01

    This paper describes work conducted in order to control automotive active engine mounts, consisting of a conventional passive mount and an internal electromagnetic actuator. Active engine mounts seek to cancel the oscillatory forces generated by the rotation of out-of-balance masses within the engine. The actuator generates a force dependent on a control signal from an algorithm implemented with a real-time DSP. The filtered-x least-mean-square (FXLMS) adaptive filter is used as a benchmark for comparison with a new implementation of the error-driven minimal controller synthesis (Er-MCSI) adaptive controller. Both algorithms are applied to an active mount fitted to a saloon car equipped with a four-cylinder turbo-diesel engine, and have no a priori knowledge of the system dynamics. The steady-state and transient performance of the two algorithms are compared and the relative merits of the two approaches are discussed. The Er-MCSI strategy offers significant computational advantages as it requires no cancellation path modelling. The Er-MCSI controller is found to perform in a fashion similar to the FXLMS filter—typically reducing chassis vibration by 50-90% under normal driving conditions.

  8. Coding Long Contour Shapes of Binary Objects

    NASA Astrophysics Data System (ADS)

    Sánchez-Cruz, Hermilo; Rodríguez-Díaz, Mario A.

    This is an extension of the paper appeared in [15]. This time, we compare four methods: Arithmetic coding applied to 3OT chain code (Arith-3OT), Arithmetic coding applied to DFCCE (Arith-DFCCE), Huffman coding applied to DFCCE chain code (Huff-DFCCE), and, to measure the efficiency of the chain codes, we propose to compare the methods with JBIG, which constitutes an international standard. In the aim to look for a suitable and better representation of contour shapes, our probes suggest that a sound method to represent contour shapes is 3OT, because Arithmetic coding applied to it gives the best results regarding JBIG, independently of the perimeter of the contour shapes.

  9. Modified contour-improved perturbation theory

    SciTech Connect

    Cvetic, Gorazd; Loewe, Marcelo; Martinez, Cristian; Valenzuela, Cristian

    2010-11-01

    The semihadronic tau decay width allows a clean extraction of the strong coupling constant at low energies. We present a modification of the standard ''contour-improved'' method based on a derivative expansion of the Adler function. The new approach has some advantages compared to contour-improved perturbation theory. The renormalization scale dependence is weaker by more than a factor of 2 and the last term of the expansion is reduced by about 10%, while the renormalization scheme dependence remains approximately equal. The extracted QCD coupling at the tau mass scale is by 2% lower than the contour-improved value. We find {alpha}{sub s}(M{sub Z}{sup 2})=0.1211{+-}0.0010.

  10. Effects of algorithm for diagnosis of active labour: cluster randomised trial

    PubMed Central

    Hundley, Vanora; Dowding, Dawn; Bland, J Martin; McNamee, Paul; Greer, Ian; Styles, Maggie; Barnett, Carol A; Scotland, Graham; Niven, Catherine

    2008-01-01

    Objective To compare the effectiveness of an algorithm for diagnosis of active labour in primiparous women with standard care in terms of maternal and neonatal outcomes. Design Cluster randomised trial. Setting Maternity units in Scotland with at least 800 annual births. Participants 4503 women giving birth for the first time, in 14 maternity units. Seven experimental clusters collected data from a baseline sample of 1029 women and a post-implementation sample of 896 women. The seven control clusters had a baseline sample of 1291 women and a post-implementation sample of 1287 women. Intervention Use of an algorithm by midwives to assist their diagnosis of active labour, compared with standard care. Main outcomes Primary outcome: use of oxytocin for augmentation of labour. Secondary outcomes: medical interventions in labour, admission management, and birth outcome. Results No significant difference was found between groups in percentage use of oxytocin for augmentation of labour (experimental minus control, difference=0.3, 95% confidence interval −9.2 to 9.8; P=0.9) or in the use of medical interventions in labour. Women in the algorithm group were more likely to be discharged from the labour suite after their first labour assessment (difference=−19.2, −29.9 to −8.6; P=0.002) and to have more pre-labour admissions (0.29, 0.04 to 0.55; P=0.03). Conclusions Use of an algorithm to assist midwives with the diagnosis of active labour in primiparous women did not result in a reduction in oxytocin use or in medical intervention in spontaneous labour. Significantly more women in the experimental group were discharged home after their first labour ward assessment. Trial registration Current Controlled Trials ISRCTN00522952. PMID:19064606

  11. Contour-based classification of video objects

    NASA Astrophysics Data System (ADS)

    Richter, Stephan; Kuehne, Gerald; Schuster, Oliver

    2000-12-01

    The recognition of objects that appear in a video sequence is an essential aspect of any video content analysis system. We present an approach which classifies a segmented video object base don its appearance in successive video frames. The classification is performed by matching curvature features of the contours of these object views to a database containing preprocessed views of prototypical objects using a modified curvature scale space technique. By integrating the result of an umber of successive frames and by using the modified curvature scale space technique as an efficient representation of object contours, our approach enables the robust, tolerant and rapid object classification of video objects.

  12. Contour-based classification of video objects

    NASA Astrophysics Data System (ADS)

    Richter, Stephan; Kuehne, Gerald; Schuster, Oliver

    2001-01-01

    The recognition of objects that appear in a video sequence is an essential aspect of any video content analysis system. We present an approach which classifies a segmented video object base don its appearance in successive video frames. The classification is performed by matching curvature features of the contours of these object views to a database containing preprocessed views of prototypical objects using a modified curvature scale space technique. By integrating the result of an umber of successive frames and by using the modified curvature scale space technique as an efficient representation of object contours, our approach enables the robust, tolerant and rapid object classification of video objects.

  13. Reconstructing patient-specific cardiac models from contours via Delaunay triangulation and graph-cuts.

    PubMed

    Wan, Min; Lim, Calvin; Zhang, Junmei; Su, Yi; Yeo, Si Yong; Wang, Desheng; Tan, Ru San; Zhong, Liang

    2013-01-01

    This study proposes a novel method to reconstruct the left cardiac structure from contours. Given the contours representing left ventricle (LV), left atrium (LA), and aorta (AO), re-orientation, contour matching, extrapolation, and interpolation are performed sequentially. The processed data are then reconstructed via a variational method. The weighted minimal surface model is revised to handle the multi-phase cases, which happens at the LV-LA-AO junction. A Delaunay-based tetrahedral mesh is generated to discretize the domain while the max-flow/min-cut algorithm is utilized as the minimization tool. The reconstructed model including LV, LA, and AO structure is extracted from the mesh and post-processed further. Numerical examples show the robustness and effectiveness of the proposed method. PMID:24110352

  14. The velocity snake: Deformable contour for tracking in spatio-velocity space

    SciTech Connect

    Peterfreund, N.

    1997-06-01

    The author presents a new active contour model for boundary tracking and position prediction of nonrigid objects, which results from applying a velocity control to the class of elastodynamical contour models, known as snakes. The proposed control term minimizes an energy dissipation function which measures the difference between the contour velocity and the apparent velocity of the image. Treating the image video-sequence as continuous measurements along time, it is shown that the proposed control results in an unbiased tracking. This is in contrast to the original snake model which is proven to be biased due to the image (object) velocity, thus resulting in high sensitivity to image clutter. The motion estimation further allows for position prediction of nonrigid boundaries. Based on the proposed control approach, the author proposes a new class of real time tracking contours, varying from models with batch-mode control estimation to models with real time adaptive controllers.

  15. Evaluation of solar mirror figure by moire contouring

    SciTech Connect

    Griffin, J.W.; Lind, M.A.

    1980-06-01

    Moire topography is applied to the figure assessment of solar mirrors. The technique is demonstrated on component facets of a six-meter diameter, four-meter focal length, parabolic dish collector. The relative ease of experimental implementation and subsequent data analysis suggests distinct advantages over the more established laser ray trace or BCS/ICS technique for many applications. The theoretical and experimental considerations necessary to fully implement moire topography on mirror surfaces are detailed. A procedure to de-specularize the mirror is demonstrated which conserves the surface morphology without damaging the reflective surface. The moire fringe patterns observed for the actual mirror facets are compared with theoretical contours generated for representative dish facets using a computer simulation algorithm. A method for evaluating the figure error of the real facet is presented in which the error parameter takes the form of an average absolute deviation of the surface slope from theoretical. The experimental measurement system used for this study employs a 200 line/inch Ronchi transmission grating. The mirror surface is illuminated by a collimated beam at 60/sup 0/. The fringe observation is performed normal to the grating. These parameters yield contour intervals for the fringe patterns of 0.073 mm. The practical considerations for extending the techniques to higher resolution are discussed.

  16. A statistics-based pitch contour model for Mandarin speech.

    PubMed

    Chen, Sin-Horng; Lai, Wen-Hsing; Wang, Yih-Ru

    2005-02-01

    A statistics-based syllable pitch contour model for Mandarin speech is proposed. This approach takes the mean and the shape of a syllable log-pitch contour as two basic modeling units and considers several affecting factors that contribute to their variations. The affecting factors include the speaker, prosodic state (which essentially represents the high-level linguistic components of F0 and will be explained more clearly in Sec. I), tone, and initial and final syllable classes. The parameters of the two modeling units were automatically estimated using the expectation-maximization (EM) algorithm. Experimental results showed that the root mean squared errors (RMSEs) obtained in the closed and open tests in the reconstructed pitch period were 0.362 and 0.373 ms, respectively. This model provides a way to separate the effects of several major factors. All of the inferred values of the affecting factors were in close agreement with our prior linguistic knowledge. It also gives a quantitative and more complete description of the coarticulation effect of neighboring tones rather than conventional qualitative descriptions of the tone sandhi rules. In addition, the model can provide useful cues to determine the prosodic phrase boundaries, including those occurring at intersyllable locations, with or without punctuation marks. PMID:15759710

  17. Structure light with laser speckle for object contour reconstruction

    NASA Astrophysics Data System (ADS)

    Hua, Ting-Xuan; Chen, Cheng-Huan; Tsai, Augustine; Liu, Wen-Kai

    2012-02-01

    Invisible grid-pattern structure light has often been used for being shined on objects for contour reconstruction based on the distortion of grid pattern, for vehicle collision prevention etc. However, the structure light can be easily disturbed by surrounding nature light even if infra-red (IR) light source is used because natural light contains quite an amount of IR spectrum. In this paper, it is proposed that the structure light is provided from a highly coherent laser source, so that the structure light pattern reflected from the target object will contain not only the distorted irradiance distribution of grid pattern, but also laser speckle associated with it. The laser speckle pattern depends on the surface roughness of the target object, which provides extra information for extracting the distorted grid pattern from the background irradiance of surrounding natural light. The laser speckle pattern therefore helps to improve the immunity for surrounding light disturbance, and hence the robustness and reliability of contour reconstruction system. A binary surface relief phase-type diffractive optical element(DOE) has been proposed for generating desired pattern directly at far field when working together with laser light source. The design process is based on iterative Fourier transform algorithm(IFTA) in scalar diffraction theory.

  18. Contour junctions underlie neural representations of scene categories in high-level human visual cortex.

    PubMed

    Choo, Heeyoung; Walther, Dirk B

    2016-07-15

    Humans efficiently grasp complex visual environments, making highly consistent judgments of entry-level category despite their high variability in visual appearance. How does the human brain arrive at the invariant neural representations underlying categorization of real-world environments? We here show that the neural representation of visual environments in scene-selective human visual cortex relies on statistics of contour junctions, which provide cues for the three-dimensional arrangement of surfaces in a scene. We manipulated line drawings of real-world environments such that statistics of contour orientations or junctions were disrupted. Manipulated and intact line drawings were presented to participants in an fMRI experiment. Scene categories were decoded from neural activity patterns in the parahippocampal place area (PPA), the occipital place area (OPA) and other visual brain regions. Disruption of junctions but not orientations led to a drastic decrease in decoding accuracy in the PPA and OPA, indicating the reliance of these areas on intact junction statistics. Accuracy of decoding from early visual cortex, on the other hand, was unaffected by either image manipulation. We further show that the correlation of error patterns between decoding from the scene-selective brain areas and behavioral experiments is contingent on intact contour junctions. Finally, a searchlight analysis exposes the reliance of visually active brain regions on different sets of contour properties. Statistics of contour length and curvature dominate neural representations of scene categories in early visual areas and contour junctions in high-level scene-selective brain regions. PMID:27118087

  19. Using Modified Contour Deformable Model to Quantitatively Estimate Ultrasound Parameters for Osteoporosis Assessment

    NASA Astrophysics Data System (ADS)

    Chen, Yung-Fu; Du, Yi-Chun; Tsai, Yi-Ting; Chen, Tainsong

    Osteoporosis is a systemic skeletal disease, which is characterized by low bone mass and micro-architectural deterioration of bone tissue, leading to bone fragility. Finding an effective method for prevention and early diagnosis of the disease is very important. Several parameters, including broadband ultrasound attenuation (BUA), speed of sound (SOS), and stiffness index (STI), have been used to measure the characteristics of bone tissues. In this paper, we proposed a method, namely modified contour deformable model (MCDM), bases on the active contour model (ACM) and active shape model (ASM) for automatically detecting the calcaneus contour from quantitative ultrasound (QUS) parametric images. The results show that the difference between the contours detected by the MCDM and the true boundary for the phantom is less than one pixel. By comparing the phantom ROIs, significant relationship was found between contour mean and bone mineral density (BMD) with R=0.99. The influence of selecting different ROI diameters (12, 14, 16 and 18 mm) and different region-selecting methods, including fixed region (ROI fix ), automatic circular region (ROI cir ) and calcaneal contour region (ROI anat ), were evaluated for testing human subjects. Measurements with large ROI diameters, especially using fixed region, result in high position errors (10-45%). The precision errors of the measured ultrasonic parameters for ROI anat are smaller than ROI fix and ROI cir . In conclusion, ROI anat provides more accurate measurement of ultrasonic parameters for the evaluation of osteoporosis and is useful for clinical application.

  20. Apparatus for electrolytically tapered or contoured cavities

    NASA Technical Reports Server (NTRS)

    Williams, L. A. (Inventor)

    1967-01-01

    An electrolytic machining apparatus for forming tapered or contoured cavities in an electrically conductive and electrochemically erodible piece is presented. It supports the workpiece and an electrode for movement relatively toward each other and has means for pumping an electrolyte between the workpiece and the electrode.

  1. Improved discrimination in photographic density contouring

    NASA Technical Reports Server (NTRS)

    Godding, R. A.

    1974-01-01

    Density discrimination can be accomplished through use of special photographic contouring material which has two sensitive layers (one negative, one positive) on single support. Process will be of interest to investigators who require finer discrimination of densities of original photograph for purposes such as identification of crops and analysis of energy levels of radiating objects.

  2. Automatic Contour Tracking in Ultrasound Images

    ERIC Educational Resources Information Center

    Li, Min; Kambhamettu, Chandra; Stone, Maureen

    2005-01-01

    In this paper, a new automatic contour tracking system, EdgeTrak, for the ultrasound image sequences of human tongue is presented. The images are produced by a head and transducer support system (HATS). The noise and unrelated high-contrast edges in ultrasound images make it very difficult to automatically detect the correct tongue surfaces. In…

  3. Expectations for Melodic Contours Transcend Pitch

    PubMed Central

    Graves, Jackson E.; Micheyl, Christophe; Oxenham, Andrew J.

    2015-01-01

    The question of what makes a good melody has interested composers, music theorists, and psychologists alike. Many of the observed principles of good “melodic continuation” involve melodic contour – the pattern of rising and falling pitch within a sequence. Previous work has shown that contour perception can extend beyond pitch to other auditory dimensions, such as brightness and loudness. Here, we show with two experiments that the generalization of contour perception to non-traditional dimensions also extends to melodic expectations. In the first experiment, subjective ratings for three-tone sequences that vary in brightness or loudness conformed to the same general contour-based expectations as pitch sequences. In the second experiment, we modified the sequence of melody presentation such that melodies with the same beginning were blocked together. This change produced substantively different results, but the patterns of ratings remained similar across the three auditory dimensions. Taken together, these results suggest that 1) certain well-known principles of melodic expectation (such as the expectation for a reversal following a skip) are dependent on long-term context, and 2) these expectations are not unique to the dimension of pitch and may instead reflect more general principles of perceptual organization. PMID:25365571

  4. Expectations for melodic contours transcend pitch.

    PubMed

    Graves, Jackson E; Micheyl, Christophe; Oxenham, Andrew J

    2014-12-01

    The question of what makes a good melody has interested composers, music theorists, and psychologists alike. Many of the observed principles of good "melodic continuation" involve melodic contour-the pattern of rising and falling pitch within a sequence. Previous work has shown that contour perception can extend beyond pitch to other auditory dimensions, such as brightness and loudness. Here, we show that the generalization of contour perception to nontraditional dimensions also extends to melodic expectations. In the first experiment, subjective ratings for 3-tone sequences that vary in brightness or loudness conformed to the same general contour-based expectations as pitch sequences. In the second experiment, we modified the sequence of melody presentation such that melodies with the same beginning were blocked together. This change produced substantively different results, but the patterns of ratings remained similar across the 3 auditory dimensions. Taken together, these results suggest that (a) certain well-known principles of melodic expectation (such as the expectation for a reversal following a skip) are dependent on long-term context, and (b) these expectations are not unique to the dimension of pitch and may instead reflect more general principles of perceptual organization. PMID:25365571

  5. Contoured Orifice for Silicon-Ribbon Die

    NASA Technical Reports Server (NTRS)

    Mackintosh, B. H.

    1985-01-01

    Die configuration encourages purity and stable growth. Contour of die orifice changes near ribbon edges. As result, silicon ribbon has nearly constant width and little carbon contamination. Die part of furnace being developed to produce high-quality, low-cost material for solar cells.

  6. A Computer Language for ECG Contour Analysis

    PubMed Central

    McConnochie, John W.

    1982-01-01

    The purpose of this paper is to demonstrate contructively that criteria for ECG contour analysis can be interpreted directly by a computer. Thereby, the programming task is greatly reduced. Direct interpretation is achieved by the creation of a computer language that is well-suited for the expression of such criteria. Further development of the language is planned.

  7. Contour completion through depth interferes with stereoacuity

    NASA Technical Reports Server (NTRS)

    Vreven, Dawn; McKee, Suzanne P.; Verghese, Preeti

    2002-01-01

    Local disparity signals must interact in visual cortex to represent boundaries and surfaces of three-dimensional (3D) objects. We investigated how disparity signals interact in 3D contours and in 3D surfaces generated from the contours. We compared flat (single disparity) stimuli with curved (multi-disparity) stimuli. We found no consistent differences in sensitivity to contours vs. surfaces; for equivalent amounts of disparity, however, observers were more sensitive to flat stimuli than curved stimuli. Poor depth sensitivity for curved stimuli cannot be explained by the larger range of disparities present in the curved surface, nor by disparity averaging, nor by poor sensitivity to the largest disparity in the stimulus. Surprisingly, sensitivity to surfaces curved in depth was improved by removing portions of the surface and thus removing disparity information. Stimulus configuration had a profound effect on stereo thresholds that cannot be accounted for by disparity-energy models of V1 processing. We suggest that higher-level 3D contour or 3D shape mechanisms are involved.

  8. Molding Compound For Inspection Of Internal Contours

    NASA Technical Reports Server (NTRS)

    Adams, Jim; Ricklefs, Steve

    1988-01-01

    Material clean, sets rapidly, and easy to use. Silicone elastomer, Citrocon or equivalent, commonly used in dentistry, in combination with mold-release agent (Also see MFS-29240), speeds and facilitates making of impressions of interior surfaces so surface contours examined. Elastomer easily moved around in cavity until required location found.

  9. Aircraft noise source and contour estimation

    NASA Technical Reports Server (NTRS)

    Dunn, D. G.; Peart, N. A.

    1973-01-01

    Calculation procedures are presented for predicting the noise-time histories and noise contours (footprints) of five basic types of aircraft; turbojet, turofan, turboprop, V/STOL, and helicopter. The procedures have been computerized to facilitate prediction of the noise characteristics during takeoffs, flyovers, and/or landing operations.

  10. Contour-measuring tool for composite layups

    NASA Technical Reports Server (NTRS)

    Fontes, M. J.

    1981-01-01

    Simple handtool helps form contours and complex shapes from laminae of resin-impregnated fabric. Tool, which consists of yoke having ballpoint pen and spindle and gage, is placed so that it straddles model. As toll is moved, pen draws constant thickness focus that is used as template.

  11. Camera Would Monitor Weld-Pool Contours

    NASA Technical Reports Server (NTRS)

    Gordon, Stephen S.; Gutow, David A.

    1990-01-01

    Weld pool illuminated and viewed coaxially along welding torch. Proposed monitoring subsystem for arc welder provides image in which horizontal portions of surface of weld pool highlighted. Monitoring and analyzing subsystems integrated into overall control system of robotic welder. Control system sets welding parameters to adapt to changing conditions, maintaining surface contour giving desired pattern of reflections.

  12. Melodic Contour Identification by Cochlear Implant Listeners

    PubMed Central

    Galvin, John J.; Fu, Qian-Jie; Nogaki, Geraldine

    2013-01-01

    Objective While the cochlear implant provides many deaf patients with good speech understanding in quiet, music perception and appreciation with the cochlear implant remains a major challenge for most cochlear implant users. The present study investigated whether a closed-set melodic contour identification (MCI) task could be used to quantify cochlear implant users’ ability to recognize musical melodies and whether MCI performance could be improved with moderate auditory training. The present study also compared MCI performance with familiar melody identification (FMI) performance, with and without MCI training. Methods For the MCI task, test stimuli were melodic contours composed of 5 notes of equal duration whose frequencies corresponded to musical intervals. The interval between successive notes in each contour was varied between 1 and 5 semitones; the “root note” of the contours was also varied (A3, A4, and A5). Nine distinct musical patterns were generated for each interval and root note condition, resulting in a total of 135 musical contours. The identification of these melodic contours was measured in 11 cochlear implant users. FMI was also evaluated in the same subjects; recognition of 12 familiar melodies was tested with and without rhythm cues. MCI was also trained in 6 subjects, using custom software and melodic contours presented in a different frequency range from that used for testing. Results Results showed that MCI recognition performance was highly variable among cochlear implant users, ranging from 14% to 91% correct. For most subjects, MCI performance improved as the number of semitones between successive notes was increased; performance was slightly lower for the A3 root note condition. Mean FMI performance was 58% correct when rhythm cues were preserved and 29% correct when rhythm cues were removed. Statistical analyses revealed no significant correlation between MCI performance and FMI performance (with or without rhythmic cues). However

  13. Applications of genetic algorithms on the structure-activity relationship analysis of some cinnamamides.

    PubMed

    Hou, T J; Wang, J M; Liao, N; Xu, X J

    1999-01-01

    Quantitative structure-activity relationships (QSARs) for 35 cinnamamides were studied. By using a genetic algorithm (GA), a group of multiple regression models with high fitness scores was generated. From the statistical analyses of the descriptors used in the evolution procedure, the principal features affecting the anticonvulsant activity were found. The significant descriptors include the partition coefficient, the molar refraction, the Hammet sigma constant of the substituents on the benzene ring, and the formation energy of the molecules. It could be found that the steric complementarity and the hydrophobic interaction between the inhibitors and the receptor were very important to the biological activity, while the contribution of the electronic effect was not so obvious. Moreover, by construction of the spline models for these four principal descriptors, the effective range for each descriptor was identified. PMID:10529984

  14. New method of 2-dimensional metrology using mask contouring

    NASA Astrophysics Data System (ADS)

    Matsuoka, Ryoichi; Yamagata, Yoshikazu; Sugiyama, Akiyuki; Toyoda, Yasutaka

    2008-10-01

    We have developed a new method of accurately profiling and measuring of a mask shape by utilizing a Mask CD-SEM. The method is intended to realize high accuracy, stability and reproducibility of the Mask CD-SEM adopting an edge detection algorithm as the key technology used in CD-SEM for high accuracy CD measurement. In comparison with a conventional image processing method for contour profiling, this edge detection method is possible to create the profiles with much higher accuracy which is comparable with CD-SEM for semiconductor device CD measurement. This method realizes two-dimensional metrology for refined pattern that had been difficult to measure conventionally by utilizing high precision contour profile. In this report, we will introduce the algorithm in general, the experimental results and the application in practice. As shrinkage of design rule for semiconductor device has further advanced, an aggressive OPC (Optical Proximity Correction) is indispensable in RET (Resolution Enhancement Technology). From the view point of DFM (Design for Manufacturability), a dramatic increase of data processing cost for advanced MDP (Mask Data Preparation) for instance and surge of mask making cost have become a big concern to the device manufacturers. This is to say, demands for quality is becoming strenuous because of enormous quantity of data growth with increasing of refined pattern on photo mask manufacture. In the result, massive amount of simulated error occurs on mask inspection that causes lengthening of mask production and inspection period, cost increasing, and long delivery time. In a sense, it is a trade-off between the high accuracy RET and the mask production cost, while it gives a significant impact on the semiconductor market centered around the mask business. To cope with the problem, we propose the best method of a DFM solution using two-dimensional metrology for refined pattern.

  15. Automatic Endocardium Contour Tracing Method Using Standard Left Ventricles Shape Model

    NASA Astrophysics Data System (ADS)

    Horie, Masahiro; Kashima, Masayuki; Sato, Kiminori; Watanabe, Mutsumi

    The necessity of ultrasonic diagnosis tools increases every year. We propose an automatic endocardium tracing method by applying prepared “Standard Left Ventricles Shape Model (SLVSM)”. The cross section of heart wall in ultrasonic image is decided depending on the position and the angle of this probe. The initial contour is adaptively determined as crossing curve line between the SLVSM and the cross section. And the endocardium contour is extracted by active contour model(ACM) in two stages. In the first stage, an endocardium contour is detected using the result of an edge extraction based on the separability of image features. In the second stage, the endocardium contour is extracted using shape correction processing. “Mitral valve processing” not only detects the position of the mitral valve at the end diastolic period, but also corrects the detected contour after the first stage of ACM. Experimental results using one healthy case and three diseased cases have shown the effectiveness of the proposed method.

  16. Active Segmentation

    PubMed Central

    Mishra, Ajay; Aloimonos, Yiannis

    2009-01-01

    The human visual system observes and understands a scene/image by making a series of fixations. Every fixation point lies inside a particular region of arbitrary shape and size in the scene which can either be an object or just a part of it. We define as a basic segmentation problem the task of segmenting that region containing the fixation point. Segmenting the region containing the fixation is equivalent to finding the enclosing contour- a connected set of boundary edge fragments in the edge map of the scene - around the fixation. This enclosing contour should be a depth boundary. We present here a novel algorithm that finds this bounding contour and achieves the segmentation of one object, given the fixation. The proposed segmentation framework combines monocular cues (color/intensity/texture) with stereo and/or motion, in a cue independent manner. The semantic robots of the immediate future will be able to use this algorithm to automatically find objects in any environment. The capability of automatically segmenting objects in their visual field can bring the visual processing to the next level. Our approach is different from current approaches. While existing work attempts to segment the whole scene at once into many areas, we segment only one image region, specifically the one containing the fixation point. Experiments with real imagery collected by our active robot and from the known databases 1 demonstrate the promise of the approach. PMID:20686671

  17. Effects of Varying Epoch Lengths, Wear Time Algorithms, and Activity Cut-Points on Estimates of Child Sedentary Behavior and Physical Activity from Accelerometer Data

    PubMed Central

    Banda, Jorge A.; Haydel, K. Farish; Davila, Tania; Desai, Manisha; Haskell, William L.; Matheson, Donna; Robinson, Thomas N.

    2016-01-01

    Objective To examine the effects of accelerometer epoch lengths, wear time (WT) algorithms, and activity cut-points on estimates of WT, sedentary behavior (SB), and physical activity (PA). Methods 268 7–11 year-olds with BMI ≥ 85th percentile for age and sex wore accelerometers on their right hips for 4–7 days. Data were processed and analyzed at epoch lengths of 1-, 5-, 10-, 15-, 30-, and 60-seconds. For each epoch length, WT minutes/day was determined using three common WT algorithms, and minutes/day and percent time spent in SB, light (LPA), moderate (MPA), and vigorous (VPA) PA were determined using five common activity cut-points. ANOVA tested differences in WT, SB, LPA, MPA, VPA, and MVPA when using the different epoch lengths, WT algorithms, and activity cut-points. Results WT minutes/day varied significantly by epoch length when using the NHANES WT algorithm (p < .0001), but did not vary significantly by epoch length when using the ≥ 20 minute consecutive zero or Choi WT algorithms. Minutes/day and percent time spent in SB, LPA, MPA, VPA, and MVPA varied significantly by epoch length for all sets of activity cut-points tested with all three WT algorithms (all p < .0001). Across all epoch lengths, minutes/day and percent time spent in SB, LPA, MPA, VPA, and MVPA also varied significantly across all sets of activity cut-points with all three WT algorithms (all p < .0001). Conclusions The common practice of converting WT algorithms and activity cut-point definitions to match different epoch lengths may introduce significant errors. Estimates of SB and PA from studies that process and analyze data using different epoch lengths, WT algorithms, and/or activity cut-points are not comparable, potentially leading to very different results, interpretations, and conclusions, misleading research and public policy. PMID:26938240

  18. Multi-objective decoupling algorithm for active distance control of intelligent hybrid electric vehicle

    NASA Astrophysics Data System (ADS)

    Luo, Yugong; Chen, Tao; Li, Keqiang

    2015-12-01

    The paper presents a novel active distance control strategy for intelligent hybrid electric vehicles (IHEV) with the purpose of guaranteeing an optimal performance in view of the driving functions, optimum safety, fuel economy and ride comfort. Considering the complexity of driving situations, the objects of safety and ride comfort are decoupled from that of fuel economy, and a hierarchical control architecture is adopted to improve the real-time performance and the adaptability. The hierarchical control structure consists of four layers: active distance control object determination, comprehensive driving and braking torque calculation, comprehensive torque distribution and torque coordination. The safety distance control and the emergency stop algorithms are designed to achieve the safety and ride comfort goals. The optimal rule-based energy management algorithm of the hybrid electric system is developed to improve the fuel economy. The torque coordination control strategy is proposed to regulate engine torque, motor torque and hydraulic braking torque to improve the ride comfort. This strategy is verified by simulation and experiment using a forward simulation platform and a prototype vehicle. The results show that the novel control strategy can achieve the integrated and coordinated control of its multiple subsystems, which guarantees top performance of the driving functions and optimum safety, fuel economy and ride comfort.

  19. Off-the-shelf mobile handset environments for deploying accelerometer based gait and activity analysis algorithms.

    PubMed

    Hynes, Martin; Wang, Han; Kilmartin, Liam

    2009-01-01

    Over the last decade, there has been substantial research interest in the application of accelerometry data for many forms of automated gait and activity analysis algorithms. This paper introduces a summary of new "of-the-shelf" mobile phone handset platforms containing embedded accelerometers which support the development of custom software to implement real time analysis of the accelerometer data. An overview of the main software programming environments which support the development of such software, including Java ME based JSR 256 API, C++ based Motion Sensor API and the Python based "aXYZ" module, is provided. Finally, a sample application is introduced and its performance evaluated in order to illustrate how a standard mobile phone can be used to detect gait activity using such a non-intrusive and easily accepted sensing platform. PMID:19964383

  20. 47 CFR 73.311 - Field strength contours.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 47 Telecommunication 4 2010-10-01 2010-10-01 false Field strength contours. 73.311 Section 73.311... Broadcast Stations § 73.311 Field strength contours. (a) Applications for FM broadcast authorizations must show the field strength contours required by FCC Form 301 or FCC Form 340, as appropriate. (b)...

  1. 47 CFR 73.311 - Field strength contours.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 47 Telecommunication 4 2013-10-01 2013-10-01 false Field strength contours. 73.311 Section 73.311... Broadcast Stations § 73.311 Field strength contours. (a) Applications for FM broadcast authorizations must show the field strength contours required by FCC Form 301 or FCC Form 340, as appropriate. (b)...

  2. 47 CFR 73.311 - Field strength contours.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 47 Telecommunication 4 2011-10-01 2011-10-01 false Field strength contours. 73.311 Section 73.311... Broadcast Stations § 73.311 Field strength contours. (a) Applications for FM broadcast authorizations must show the field strength contours required by FCC Form 301 or FCC Form 340, as appropriate. (b)...

  3. 47 CFR 73.311 - Field strength contours.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 47 Telecommunication 4 2014-10-01 2014-10-01 false Field strength contours. 73.311 Section 73.311... Broadcast Stations § 73.311 Field strength contours. (a) Applications for FM broadcast authorizations must show the field strength contours required by FCC Form 301 or FCC Form 340, as appropriate. (b)...

  4. 47 CFR 73.311 - Field strength contours.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 47 Telecommunication 4 2012-10-01 2012-10-01 false Field strength contours. 73.311 Section 73.311... Broadcast Stations § 73.311 Field strength contours. (a) Applications for FM broadcast authorizations must show the field strength contours required by FCC Form 301 or FCC Form 340, as appropriate. (b)...

  5. Thermal contouring of forestry data: Wallops Island

    NASA Technical Reports Server (NTRS)

    Thomson, F.

    1972-01-01

    The contouring of 8-13.5 micrometer thermal data collected over a forestry site in Virginia is described. The data were collected at an altitude of 1000 ft above terrain on November 4, 1970. The site was covered on three approximately parallel lines. The purpose of the contouring was to attempt to delineate pine trees attacked by southern pine bark beetle, and to map other important terrain categories. Special processing steps were required to achieve the correct aspect ratio of the thermal data. The reference for the correction procedure was color infrared photography. Data form and quality are given, processing steps are outlined, a brief interpretation of results is given, and conclusion are presented.

  6. EFFICIENT FEATURE-BASED CONTOUR EXTRACTION.

    SciTech Connect

    Gattiker, J. R.

    2001-01-01

    Extraction of contours in binary images is an important element of object recognition. This paper discusses a more efficient approach to contour representation and generation. This approach defines a bounding polygon as defined by its vertices rather than by all enclosing pixels, which in itself is an effective representation. These corners can be identified by convolution of the image with a 3 x 3 filter. When these corners are organized by their connecting orientation, identified by the convolution, and type, inside or outside, connectivity characteristics can be articulated to highly constrain the task of sorting the vertices into ordered boundary lists. The search for the next bounding polygon vertex is reduced to a one dimensional minimum distance search rather than the standard, more intensive two dimensional nearest Euclidean neighbor search.

  7. Contour forming of metals by laser peening

    DOEpatents

    Hackel, Lloyd; Harris, Fritz

    2002-01-01

    A method and apparatus are provided for forming shapes and contours in metal sections by generating laser induced compressive stress on the surface of the metal workpiece. The laser process can generate deep compressive stresses to shape even thick components without inducing unwanted tensile stress at the metal surface. The precision of the laser-induced stress enables exact prediction and subsequent contouring of parts. A light beam of 10 to 100 J/pulse is imaged to create an energy fluence of 60 to 200 J/cm.sup.2 on an absorptive layer applied over a metal surface. A tamping layer of water is flowed over the absorptive layer. The absorption of laser light causes a plasma to form and consequently creates a shock wave that induces a deep residual compressive stress into the metal. The metal responds to this residual stress by bending.

  8. Numerosity underestimation in sets with illusory contours.

    PubMed

    Kirjakovski, Atanas; Matsumoto, Eriko

    2016-05-01

    People underestimate the numerosity of collections in which a few dots are connected in pairs by task-irrelevant lines. Such configural processing suggests that visual numerosity depends on the perceived scene segments, rather than on the perceived total area occupied by a collection. However, a methodology that uses irrelevant line connections may also introduce unnecessary distraction and variety, or obscure the perception of task-relevant items, given the saliency of the lines. To avoid such potentially confounding variables, we conducted four experiments where the line-connected dots were replaced with collinear inducers of Kanizsa-type illusory contours. Our participants had to compare two simultaneously presented collections and choose the more numerous one. Displays comprised c-shaped inducers and disks (Experiment 1), c-shaped inducers only (Experiments 2 and 4), or closed inducers (Experiment 3). One display always showed a 12- (Experiments 1-3) or 48-item reference pattern (Experiment 4); the other was a test pattern with numerosity varying between 9 and 15 (Experiments 1-3) or 36-60 items (Experiment 4). By manipulating the number of illusory contours in the test patterns, the level of connectedness increased or decreased respectively. The fitted psychometric functions revealed an underestimation that increased with the number of illusory contours in Experiments 1 and 2, but was absent in Experiments 3 and 4, where illusory contours were more difficult to perceive or larger numerosities were used. Results corroborate claims that visual numerosity estimation depends on segmented inputs, but only within moderate numerical ranges. PMID:27038561

  9. Semi-automated contour recognition using DICOMautomaton

    NASA Astrophysics Data System (ADS)

    Clark, H.; Wu, J.; Moiseenko, V.; Lee, R.; Gill, B.; Duzenli, C.; Thomas, S.

    2014-03-01

    Purpose: A system has been developed which recognizes and classifies Digital Imaging and Communication in Medicine contour data with minimal human intervention. It allows researchers to overcome obstacles which tax analysis and mining systems, including inconsistent naming conventions and differences in data age or resolution. Methods: Lexicographic and geometric analysis is used for recognition. Well-known lexicographic methods implemented include Levenshtein-Damerau, bag-of-characters, Double Metaphone, Soundex, and (word and character)-N-grams. Geometrical implementations include 3D Fourier Descriptors, probability spheres, boolean overlap, simple feature comparison (e.g. eccentricity, volume) and rule-based techniques. Both analyses implement custom, domain-specific modules (e.g. emphasis differentiating left/right organ variants). Contour labels from 60 head and neck patients are used for cross-validation. Results: Mixed-lexicographical methods show an effective improvement in more than 10% of recognition attempts compared with a pure Levenshtein-Damerau approach when withholding 70% of the lexicon. Domain-specific and geometrical techniques further boost performance. Conclusions: DICOMautomaton allows users to recognize contours semi-automatically. As usage increases and the lexicon is filled with additional structures, performance improves, increasing the overall utility of the system.

  10. Inlet contour and flow effects on radiation

    NASA Technical Reports Server (NTRS)

    Ville, J. M.; Silcox, R. J.

    1980-01-01

    An experimental investigation of sound radiation from inlets with different contours with and without flow is being conducted to study the possibility of reducing noise radiated by aircraft engines. For each inlet configuration, complex directivity patterns and complex pressure reflection coefficients are measured as a function of a single space-time structure of the wave (up to a frequency of 4000Hz and an azimuthal wave number 6) and of flow velocity (up to Mach number 0.4) in a cylindrical duct located downstream the inlet. Experimental results of radiation from an unflanged duct are compared with theory. Effect of inlet contour and flow are deduced by comparing respectively unflanged duct and bellmouth measurements and, no flow and flow measurements with the bellmouth. Results are presented which indicate that the contour effect is significant near the cut-on frequency of a mode and emphasize the necessity for taking into account the inlet geometry in a radiation prediction. These results show also that internal flow has a weak effect on the amplitude of the directivity pattern

  11. Inlet contour and flow effects on radiation

    NASA Astrophysics Data System (ADS)

    Ville, J. M.; Silcox, R. J.

    1980-06-01

    An experimental investigation of sound radiation from inlets with different contours with and without flow is being conducted to study the possibility of reducing noise radiated by aircraft engines. For each inlet configuration, complex directivity patterns and complex pressure reflection coefficients are measured as a function of a single space-time structure of the wave (up to a frequency of 4000Hz and an azimuthal wave number 6) and of flow velocity (up to Mach number 0.4) in a cylindrical duct located downstream the inlet. Experimental results of radiation from an unflanged duct are compared with theory. Effect of inlet contour and flow are deduced by comparing respectively unflanged duct and bellmouth measurements and, no flow and flow measurements with the bellmouth. Results are presented which indicate that the contour effect is significant near the cut-on frequency of a mode and emphasize the necessity for taking into account the inlet geometry in a radiation prediction. These results show also that internal flow has a weak effect on the amplitude of the directivity pattern

  12. Contour-Driven Atlas-Based Segmentation.

    PubMed

    Wachinger, Christian; Fritscher, Karl; Sharp, Greg; Golland, Polina

    2015-12-01

    We propose new methods for automatic segmentation of images based on an atlas of manually labeled scans and contours in the image. First, we introduce a Bayesian framework for creating initial label maps from manually annotated training images. Within this framework, we model various registration- and patch-based segmentation techniques by changing the deformation field prior. Second, we perform contour-driven regression on the created label maps to refine the segmentation. Image contours and image parcellations give rise to non-stationary kernel functions that model the relationship between image locations. Setting the kernel to the covariance function in a Gaussian process establishes a distribution over label maps supported by image structures. Maximum a posteriori estimation of the distribution over label maps conditioned on the outcome of the atlas-based segmentation yields the refined segmentation. We evaluate the segmentation in two clinical applications: the segmentation of parotid glands in head and neck CT scans and the segmentation of the left atrium in cardiac MR angiography images. PMID:26068202

  13. New Combined L-band Active/Passive Soil Moisture Retrieval Algorithm Optimized for Argentine Plains

    NASA Astrophysics Data System (ADS)

    Bruscantini, C. A.; Grings, F. M.; Salvia, M.; Ferrazzoli, P.; Karszenbaum, H.

    2015-12-01

    The ability of L-band passive microwave satellite observations to provide soil moisture (mv) measurements is well known. Despite its high sensitivity to near-surface mv, radiometric technology suffers from having a relatively low spatial resolution. Conversely active microwave observations, although their finer resolution, are difficult to be interpreted for mv content due to the confounding effects of vegetation and roughness. There have been and there are strong motivations for the realization of satellite missions that carry passive and active microwave instruments on board. This has also led to important contributions in algorithm development. In this line of work, NASA-CONAE SAC-D/Aquarius mission had on board an L band radiometer and scatterometer. This was followed by the launch of NASA SMAP mission (Soil Moisture Active Passive), as well as several airborne campaigns that provide active and passive measurements. Within this frame, a new combined active/passive mv retrieval algorithm is proposed by deriving an analytical expression of brightness temperature and radar backscattering relation using explicit semi-empirical models. Simple models (i.e. that can be easily inverted and have relatively low amount of ancillary parameters) were selected: ω-τ model (Jackson et al., 1982, Water Resources Research) and radar-only model (Narvekar et al., 2015, IEEE Transactions on Geoscience and Remote Sensing). A major challenge involves coupling the active and passive models to be consistent with observations. Coupling equations can be derived using theoretical active/passive high-order radiative transfer models, such as 3D Numerical Method of Maxwell equations (Zhou et al., 2004, IEEE Transactions on Geoscience and Remote Sensing) and Tor Vergata (Ferrazzoli et al., 1995,Remote Sensing of Environment) models. In this context, different coupling equations can be optimized for different land covers using theoretical forward models with specific parametrization for each

  14. An algorithm to detect fire activity using Meteosat: fine tuning and quality assesment

    NASA Astrophysics Data System (ADS)

    Amraoui, M.; DaCamara, C. C.; Ermida, S. L.

    2012-04-01

    Hot spot detection by means of sensors on-board geostationary satellites allows studying wildfire activity at hourly and even sub-hourly intervals, an advantage that cannot be met by polar orbiters. Since 1997, the Satellite Application Facility for Land Surface Analysis has been running an operational procedure that allows detecting active fires based on information from Meteosat-8/SEVIRI. This is the so-called Fire Detection and Monitoring (FD&M) product and the procedure takes advantage of the temporal resolution of SEVIRI (one image every 15 min), and relies on information from SEVIRI channels (namely 0.6, 0.8, 3.9, 10.8 and 12.0 μm) together with information on illumination angles. The method is based on heritage from contextual algorithms designed for polar, sun-synchronous instruments, namely NOAA/AVHRR and MODIS/TERRAAQUA. A potential fire pixel is compared with the neighboring ones and the decision is made based on relative thresholds as derived from the pixels in the neighborhood. Generally speaking, the observed fire incidence compares well against hot spots extracted from the global daily active fire product developed by the MODIS Fire Team. However, values of probability of detection (POD) tend to be quite low, a result that may be partially expected by the finer resolution of MODIS. The aim of the present study is to make a systematic assessment of the impacts on POD and False Alarm Ratio (FAR) of the several parameters that are set in the algorithms. Such parameters range from the threshold values of brightness temperature in the IR3.9 and 10.8 channels that are used to select potential fire pixels up to the extent of the background grid and thresholds used to statistically characterize the radiometric departures of a potential pixel from the respective background. The impact of different criteria to identify pixels contaminated by clouds, smoke and sun glint is also evaluated. Finally, the advantages that may be brought to the algorithm by adding

  15. Echo mapping of active galactic nuclei broad-line regions: Fundamental algorithms

    NASA Technical Reports Server (NTRS)

    Vio, Roberto; Horne, Keith; Wamsteker, Willem

    1994-01-01

    We formulate and test a series of algorithms for echo mapping the emission-line regions near active galactic nuclei from measurements of correlated variability in their line and continuum light curves. The linear regularization method (LRM) employs a direct inversion of evenly spaced light-curve data, with a regularization parameter that can be used to control the trade-off between noise and resolution. Matrix formulas express the formal solution as well as its variance and covariance in terms of uncertainties in the measurements. Unlike the maximum-entropy method (MEM), LRM applies to kernels with both positive and negative values, but the results are somewhat limited by ringing effects. A positivity constraint proves effective in controlling the ringing. MEM combines regularization and positivity in a natural way, but similar results are also found using positivity constraints with nonentropic regularization functions. Direct inversions of unevenly sampled light curves require interpolating the noisy data. In this case better results are found by solving for both the continuum light curve and kernel function in a simultaneous fit to the data. Our conclusion is that while echo mapping currently gives ambiguous results, the algorithms are not the limiting factor. Progress depends on efforts to increase the accuracy and completeness of sampling of the observed light curves.

  16. Refinement and evaluation of helicopter real-time self-adaptive active vibration controller algorithms

    NASA Technical Reports Server (NTRS)

    Davis, M. W.

    1984-01-01

    A Real-Time Self-Adaptive (RTSA) active vibration controller was used as the framework in developing a computer program for a generic controller that can be used to alleviate helicopter vibration. Based upon on-line identification of system parameters, the generic controller minimizes vibration in the fuselage by closed-loop implementation of higher harmonic control in the main rotor system. The new generic controller incorporates a set of improved algorithms that gives the capability to readily define many different configurations by selecting one of three different controller types (deterministic, cautious, and dual), one of two linear system models (local and global), and one or more of several methods of applying limits on control inputs (external and/or internal limits on higher harmonic pitch amplitude and rate). A helicopter rotor simulation analysis was used to evaluate the algorithms associated with the alternative controller types as applied to the four-bladed H-34 rotor mounted on the NASA Ames Rotor Test Apparatus (RTA) which represents the fuselage. After proper tuning all three controllers provide more effective vibration reduction and converge more quickly and smoothly with smaller control inputs than the initial RTSA controller (deterministic with external pitch-rate limiting). It is demonstrated that internal limiting of the control inputs a significantly improves the overall performance of the deterministic controller.

  17. Active and Passive Microwave Retrieval Algorithm for Hydrometeor Concentration Profiles: Application to the HAMP Instrument

    NASA Astrophysics Data System (ADS)

    Orlandi, E.; Mech, M.; Crewell, S.; Lammert, A.

    2012-12-01

    Clouds and precipitation play an important role in the atmospheric water cycle and radiation budget. Unfortunately, the understanding of the processes involved in cloud and precipitation formation and their description in global and regional models are still poor. To improve our understanding of these processes and to reduce model uncertainties, new observation and retrieval techniques are needed. The upcoming Global Precipitation Mission (GPM) provides a combination of a 36 GHz cloud radar and a suite of passive microwave instruments. In the retrieval development process for this and other upcoming missions, airborne platforms are a useful tool to test the algorithms exploiting the synergy of active and passive microwave instruments, and to validate satellite retrievals. In this respect HAMP (Microwave Package for HALO, the High Altitude Long Range aircraft), consisting of a 36 GHz Doppler cloud radar and a 26-channel radiometer, is an ideal test-bed. HAMP radiometers have frequencies along absorption lines (22, 60, 118 and 183 GHz) and in window regions, overlapping with those of AMSU A and B. HAMP will participate in early 2013 in the dedicated remote sensing HALO mission NARVAL (Next-generation Aircraft Remote-sensing for VALidation studies). During NARVAL, the HALO payload will include a water vapor lidar and drop sondes in addition to HAMP. The NARVAL campaign will thus be a excellent opportunity to test a newly developed retrieval algorithm, which exploits the synergy between passive and active microwave observations. In this work we present a Bayesian algorithm to retrieve precipitation rate, liquid and frozen hydrometeor concentration, as well as temperature and humidity profiles from the synergetic use of active and passive microwave nadir observations. Temperature and humidity are derived solely from passive radiometer measurements while the combined cloud radar and radiometer observations are used to retrieve hydrometeor concentration profiles. Lidar

  18. GASAKe: forecasting landslide activations by a genetic-algorithms based hydrological model

    NASA Astrophysics Data System (ADS)

    Terranova, O. G.; Gariano, S. L.; Iaquinta, P.; Iovine, G. G. R.

    2015-02-01

    GASAKe is a new hydrological model aimed at forecasting the triggering of landslides. The model is based on genetic-algorithms and allows to obtaining thresholds of landslide activation from the set of historical occurrences and from the rainfall series. GASAKe can be applied to either single landslides or set of similar slope movements in a homogeneous environment. Calibration of the model is based on genetic-algorithms, and provides for families of optimal, discretized solutions (kernels) that maximize the fitness function. Starting from these latter, the corresponding mobility functions (i.e. the predictive tools) can be obtained through convolution with the rain series. The base time of the kernel is related to the magnitude of the considered slope movement, as well as to hydro-geological complexity of the site. Generally, smaller values are expected for shallow slope instabilities with respect to large-scale phenomena. Once validated, the model can be applied to estimate the timing of future landslide activations in the same study area, by employing recorded or forecasted rainfall series. Example of application of GASAKe to a medium-scale slope movement (the Uncino landslide at San Fili, in Calabria, Southern Italy) and to a set of shallow landslides (in the Sorrento Peninsula, Campania, Southern Italy) are discussed. In both cases, a successful calibration of the model has been achieved, despite unavoidable uncertainties concerning the dates of landslide occurrence. In particular, for the Sorrento Peninsula case, a fitness of 0.81 has been obtained by calibrating the model against 10 dates of landslide activation; in the Uncino case, a fitness of 1 (i.e. neither missing nor false alarms) has been achieved against 5 activations. As for temporal validation, the experiments performed by considering the extra dates of landslide activation have also proved satisfactory. In view of early-warning applications for civil protection purposes, the capability of the

  19. Analysis of the accuracy of a neural algorithm for defect depth estimation using PCA processing from active thermography data

    NASA Astrophysics Data System (ADS)

    Dudzik, S.

    2013-01-01

    In the paper a neural algorithm, which uses an active thermography for defect depth estimation, is presented. Simulations of the algorithm, for three datasets representing different phases of the heat transfer process developing in the test sample were performed. The influence of the emissivity error of the test sample surface on the accuracy of defect depth estimation is discussed. The investigations were performed for test sample made of the material with low thermal diffusivity.

  20. Motion-based mechanisms of illusory contour synthesis.

    PubMed

    Anderson, B L; Barth, H C

    1999-10-01

    Neurophysiological studies and computational models of illusory contour formation have focused on contour orientation as the underlying determinant of illusory contour shape in both static and moving displays. Here, we report a class of motion-induced illusory contours that demonstrate the existence of novel mechanisms of illusory contour synthesis. In a series of experiments, we show that the velocity of contour terminations and the direction of motion of a partially occluded figure regulate the perceived shape and apparent movement of illusory contours formed from moving image sequences. These results demonstrate the existence of neural mechanisms that reconstruct occlusion relationships from both real and inferred image velocities, in contrast to the static geometric mechanisms that have been the focus of studies to date. PMID:10571236

  1. Adaptive RSOV filter using the FELMS algorithm for nonlinear active noise control systems

    NASA Astrophysics Data System (ADS)

    Zhao, Haiquan; Zeng, Xiangping; He, Zhengyou; Li, Tianrui

    2013-01-01

    This paper presents a recursive second-order Volterra (RSOV) filter to solve the problems of signal saturation and other nonlinear distortions that occur in nonlinear active noise control systems (NANC) used for actual applications. Since this nonlinear filter based on an infinite impulse response (IIR) filter structure can model higher than second-order and third-order nonlinearities for systems where the nonlinearities are harmonically related, the RSOV filter is more effective in NANC systems with either a linear secondary path (LSP) or a nonlinear secondary path (NSP). Simulation results clearly show that the RSOV adaptive filter using the multichannel structure filtered-error least mean square (FELMS) algorithm can further greatly reduce the computational burdens and is more suitable to eliminate nonlinear distortions in NANC systems than a SOV filter, a bilinear filter and a third-order Volterra (TOV) filter.

  2. An intelligent active force control algorithm to control an upper extremity exoskeleton for motor recovery

    NASA Astrophysics Data System (ADS)

    Hasbullah Mohd Isa, Wan; Taha, Zahari; Mohd Khairuddin, Ismail; Majeed, Anwar P. P. Abdul; Fikri Muhammad, Khairul; Abdo Hashem, Mohammed; Mahmud, Jamaluddin; Mohamed, Zulkifli

    2016-02-01

    This paper presents the modelling and control of a two degree of freedom upper extremity exoskeleton by means of an intelligent active force control (AFC) mechanism. The Newton-Euler formulation was used in deriving the dynamic modelling of both the anthropometry based human upper extremity as well as the exoskeleton that consists of the upper arm and the forearm. A proportional-derivative (PD) architecture is employed in this study to investigate its efficacy performing joint-space control objectives. An intelligent AFC algorithm is also incorporated into the PD to investigate the effectiveness of this hybrid system in compensating disturbances. The Mamdani Fuzzy based rule is employed to approximate the estimated inertial properties of the system to ensure the AFC loop responds efficiently. It is found that the IAFC-PD performed well against the disturbances introduced into the system as compared to the conventional PD control architecture in performing the desired trajectory tracking.

  3. Optimisation of halogenase enzyme activity by application of a genetic algorithm.

    PubMed

    Muffler, Kai; Retzlaff, Marco; van Pée, Karl-Heinz; Ulber, Roland

    2007-01-10

    A genetic algorithm (GA) was applied for the optimisation of an enzyme assay composition respectively the enzyme activity of a recombinantly produced FADH(2)-dependent halogenating enzyme. The examined enzyme belongs to the class of halogenases and is capable to halogenate tryptophan regioselective in position 5. Therefore, the expressed trp-5-halogenase can be an interesting tool in the manufacturing of serotonin precursors. The application of stochastic search strategies (e.g. GAs) is well suited for fast determination of the global optimum in multidimensional search spaces, where statistical approaches or even the popular classical one-factor-at-a-time method often failures by misleading to local optima. The concentrations of six different medium components were optimised and the maximum yield of the halogenated tryptophan could be increased from 3.5 up to 65%. PMID:16919347

  4. Enhanced surface activity of SnO2 thin film verified by LM algorithm

    NASA Astrophysics Data System (ADS)

    Choudhury, Sandip Paul; Kumari, Navnita; Bhattacharjee, Ayon

    2016-04-01

    Impedance studies were conducted on spray deposited Cu doped SnO2 thin films. Rietveld analysis provided evidence of non-existence of any other phase due to doping. Controlled injection of ethanol vapor was done to study the surface activity of these films at different temperatures. The cole-cole plots of ethanol absorbed films to that of unexposed thin films were constructed at different temperatures and compared. The studies reveal that the electron scattering process was homogeneous in nature and the film had a narrow relaxation time. Levenberg-Marquardt algorithm with unweighted function was used for theoretical fitting of the cole-cole plots that revealed the weakening of the Fermi pinning level.

  5. Application of a cross correlation-based picking algorithm to an active seismic experiment in Sicily and Aeolian Islands

    NASA Astrophysics Data System (ADS)

    Diaz, Alejandro; Álvarez, Isaac; De la Torre, Ángel; García, Luz; Benítez, Ma Carmen; Cortés, Guillermo

    2014-05-01

    The detection of the arrival time of seismic waves or picking is of great importance in many seismology applications. Traditionally, picking has been carried out by human operators. This process is not systematic and relies completely on the expertise and judgment of the analysts. The limitations of manual picking and the increasing amount of data daily stored in the seismic networks worldwide distributed and in active seismic experiments lead to the development of automatic picking algorithms. Current conventional algorithms work with single signals, such as the "short-term average over long-term average" (STA/LTA) algorithm, autoregressive methods or the recently developed "Adaptive Multiband Picking Algorithm" (AMPA). This work proposes a correlation-based picking algorithm, whose main advantage is the fact of using the information of a set of signals, improving the signal to noise ratio and therefore the picking accuracy. The main advantage of this approach is that the algorithm does not require to set up sophisticated parameters, in contrast to other automatic algorithms. The accuracy of the conventional STA/LTA algorithm, the recently developed AMPA algorithm, an autoregressive method, and a preliminary version of the cross correlation-based picking algorithm were assessed using a huge data set composed by active seismic signals from experiments in Tenerife Island (January 2007, Spain). The experiment consisted of the deployment of a dense seismic network on Tenerife Island (125 seismometers in total) and the shooting of air-guns around the island with the Spanish oceanographic vessel Hespérides (6459 air shots in total). Only 110937 signals (13.74% of the total) had the signal to noise ratio enough to be manually picked. Results showed that the use of the cross correlation-based picking algorithm significantly increases the number of signals that can be considered in the tomography. A new active seismic experiment will cover Sicily and Aeolian Islands (TOMO

  6. Use of registration-based contour propagation in texture analysis for esophageal cancer pathologic response prediction.

    PubMed

    Yip, Stephen S F; Coroller, Thibaud P; Sanford, Nina N; Huynh, Elizabeth; Mamon, Harvey; Aerts, Hugo J W L; Berbeco, Ross I

    2016-01-21

    Change in PET-based textural features has shown promise in predicting cancer response to treatment. However, contouring tumour volumes on longitudinal scans is time-consuming. This study investigated the usefulness of contour propagation in texture analysis for the purpose of pathologic response prediction in esophageal cancer. Forty-five esophageal cancer patients underwent PET/CT scans before and after chemo-radiotherapy. Patients were classified into responders and non-responders after the surgery. Physician-defined tumour ROIs on pre-treatment PET were propagated onto the post-treatment PET using rigid and ten deformable registration algorithms. PET images were converted into 256 discrete values. Co-occurrence, run-length, and size zone matrix textures were computed within all ROIs. The relative difference of each texture at different treatment time-points was used to predict the pathologic responders. Their predictive value was assessed using the area under the receiver-operating-characteristic curve (AUC). Propagated ROIs from different algorithms were compared using Dice similarity index (DSI). Contours propagated by the fast-demons, fast-free-form and rigid algorithms did not fully capture the high FDG uptake regions of tumours. Fast-demons propagated ROIs had the least agreement with other contours (DSI = 58%). Moderate to substantial overlap were found in the ROIs propagated by all other algorithms (DSI = 69%-79%). Rigidly propagated ROIs with co-occurrence texture failed to significantly differentiate between responders and non-responders (AUC = 0.58, q-value = 0.33), while the differentiation was significant with other textures (AUC = 0.71-0.73, p < 0.009). Among the deformable algorithms, fast-demons (AUC = 0.68-0.70, q-value < 0.03) and fast-free-form (AUC = 0.69-0.74, q-value < 0.04) were the least predictive. ROIs propagated by all other deformable algorithms with any texture significantly predicted pathologic responders (AUC = 0.72-0.78, q

  7. Use of registration-based contour propagation in texture analysis for esophageal cancer pathologic response prediction

    NASA Astrophysics Data System (ADS)

    Yip, Stephen S. F.; Coroller, Thibaud P.; Sanford, Nina N.; Huynh, Elizabeth; Mamon, Harvey; Aerts, Hugo J. W. L.; Berbeco, Ross I.

    2016-01-01

    Change in PET-based textural features has shown promise in predicting cancer response to treatment. However, contouring tumour volumes on longitudinal scans is time-consuming. This study investigated the usefulness of contour propagation in texture analysis for the purpose of pathologic response prediction in esophageal cancer. Forty-five esophageal cancer patients underwent PET/CT scans before and after chemo-radiotherapy. Patients were classified into responders and non-responders after the surgery. Physician-defined tumour ROIs on pre-treatment PET were propagated onto the post-treatment PET using rigid and ten deformable registration algorithms. PET images were converted into 256 discrete values. Co-occurrence, run-length, and size zone matrix textures were computed within all ROIs. The relative difference of each texture at different treatment time-points was used to predict the pathologic responders. Their predictive value was assessed using the area under the receiver-operating-characteristic curve (AUC). Propagated ROIs from different algorithms were compared using Dice similarity index (DSI). Contours propagated by the fast-demons, fast-free-form and rigid algorithms did not fully capture the high FDG uptake regions of tumours. Fast-demons propagated ROIs had the least agreement with other contours (DSI  =  58%). Moderate to substantial overlap were found in the ROIs propagated by all other algorithms (DSI  =  69%-79%). Rigidly propagated ROIs with co-occurrence texture failed to significantly differentiate between responders and non-responders (AUC  =  0.58, q-value  =  0.33), while the differentiation was significant with other textures (AUC  =  0.71‒0.73, p  <  0.009). Among the deformable algorithms, fast-demons (AUC  =  0.68‒0.70, q-value  <  0.03) and fast-free-form (AUC  =  0.69‒0.74, q-value  <  0.04) were the least predictive. ROIs propagated by all other

  8. A novel approach to motion correction for ASL images based on brain contours

    NASA Astrophysics Data System (ADS)

    Tarroni, Giacomo; Castellaro, Marco; Boffano, Carlo; Bruzzone, Maria Grazia; Bertoldo, Alessandra; Grisan, Enrico

    2015-03-01

    Motion correction in Arterial Spin Labeling (ASL) is essential to accurately assess brain perfusion. Motion correction techniques are usually based on intensity-related information, which might be unreliable in ASL due to local intensity differences between control and labeled acquisitions and to non-uniform volume magnetization caused by background-suppressed acquisition protocols. Accordingly, a novel motion correction technique based only on brain contour points is presented and tested against a widely used intensity-based technique (MCFLIRT). The proposed Contour-Based Motion Correction (CBCM) technique relies on image segmentation (to extract brain contour point clouds) and on Iterative Closest Point algorithm (to estimate the roto-translation required to align them). At variance with other approaches based on point clouds alignment, the local 3D curvature is also computed for each contour point and used as an additional coordinate to increase the accuracy of the alignment. The technique has been tested along with MCFLIRT on a database of randomly roto-translated brain volumes. Several error metrics have been computed and compared between the two techniques. The results show that the proposed technique is able to achieve a higher accuracy than MCFLIRT without any intensity-dependent information.

  9. High effectiveness contour matching contact heat exchanger

    NASA Astrophysics Data System (ADS)

    Blakely, Robert L.; Roebelen, George J., Jr.; Davenport, Arthur K.

    1988-08-01

    There is a need in the art for a heat exchanger design having a flexible core providing contour matching capabilities, which compensates for manufacturing tolerance and distortion buildups, and which accordingly furnishes a relatively uniform thermal contact conductance between the core and external heat sources under essentially all operating conditions. The core of the heat exchanger comprises a top plate and a bottom plate, each having alternate rows of pins attached. Each of the pins fits into corresponding tight-fitting recesses in the opposite plate.

  10. Body contouring following massive weight loss

    PubMed Central

    Langer, Vijay; Singh, Amitabh; Aly, Al S.; Cram, Albert E.

    2011-01-01

    Obesity is a global disease with epidemic proportions. Bariatric surgery or modified lifestyles go a long way in mitigating the vast weight gain. Patients following these interventions usually undergo massive weight loss. This results in redundant tissues in various parts of the body. Loose skin causes increased morbidity and psychological trauma. This demands various body contouring procedures that are usually excisional. These procedures are complex and part of a painstaking process that needs a committed patient and an industrious plastic surgeon. As complications in these patients can be quite frequent, both the patient and the surgeon need to be aware and willing to deal with them. PMID:21713202

  11. Contour dynamics model for electric discharges.

    PubMed

    Arrayás, M; Fontelos, M A; Jiménez, C

    2010-03-01

    We present an effective contour model for electrical discharges deduced as the asymptotic limit of the minimal streamer model for the propagation of electric discharges, in the limit of small electron diffusion. The incorporation of curvature effects to the velocity propagation and not to the boundary conditions is a feature and makes it different from the classical Laplacian growth models. The dispersion relation for a nonplanar two-dimensional discharge is calculated. The development and propagation of fingerlike patterns are studied and their main features quantified. PMID:20365808

  12. High effectiveness contour matching contact heat exchanger

    NASA Technical Reports Server (NTRS)

    Blakely, Robert L. (Inventor); Roebelen, George J., Jr. (Inventor); Davenport, Arthur K. (Inventor)

    1988-01-01

    There is a need in the art for a heat exchanger design having a flexible core providing contour matching capabilities, which compensates for manufacturing tolerance and distortion buildups, and which accordingly furnishes a relatively uniform thermal contact conductance between the core and external heat sources under essentially all operating conditions. The core of the heat exchanger comprises a top plate and a bottom plate, each having alternate rows of pins attached. Each of the pins fits into corresponding tight-fitting recesses in the opposite plate.

  13. Shear-strain contours from moire interferometry

    NASA Technical Reports Server (NTRS)

    Post, D.; Czarnek, R.; Joh, D.

    1985-01-01

    The development of whole-field contour maps of shear strains gamma (xy), derived from displacement fields obtained by moire interferometry with 2400 lines/mm, is described. The use of mechanical differentiation to obtain cross-derivatives of displacements and the use of graphical additive moire to sum the cross-derivatives are explained. Quantitative analysis in the small-strain domain is possible because of the high sensitivity of moire interferometry. The applicability of this technique is shown by the testing of a short epoxy beam under three-point bending.

  14. Performance-based semi-active control algorithm for protecting base isolated buildings from near-fault earthquakes

    NASA Astrophysics Data System (ADS)

    Mehrparvar, Behnam; Khoshnoudian, Taramarz

    2012-03-01

    Base isolated structures have been found to be at risk in near-fault regions as a result of long period pulses that may exist in near-source ground motions. Various control strategies, including passive, active and semi-active control systems, have been investigated to overcome this problem. This study focuses on the development of a semi-active control algorithm based on several performance levels anticipated from an isolated building during different levels of ground shaking corresponding to various earthquake hazard levels. The proposed performance-based algorithm is based on a modified version of the well-known semi-active skyhook control algorithm. The proposed control algorithm changes the control gain depending on the level of shaking imposed on the structure. The proposed control system has been evaluated using a series of analyses performed on a base isolated benchmark building subjected to seven pairs of scaled ground motion records. Simulation results show that the newly proposed algorithm is effective in improving the structural and nonstructural performance of the building for selected earthquakes.

  15. Collinear facilitation and contour integration in autism: evidence for atypical visual integration

    PubMed Central

    Jachim, Stephen; Warren, Paul A.; McLoughlin, Niall; Gowen, Emma

    2015-01-01

    Autism spectrum disorder (ASD) is a neurodevelopmental disorder characterized by impaired social interaction, atypical communication and a restricted repertoire of interests and activities. Altered sensory and perceptual experiences are also common, and a notable perceptual difference between individuals with ASD and controls is their superior performance in visual tasks where it may be beneficial to ignore global context. This superiority may be the result of atypical integrative processing. To explore this claim we investigated visual integration in adults with ASD (diagnosed with Asperger’s Syndrome) using two psychophysical tasks thought to rely on integrative processing—collinear facilitation and contour integration. We measured collinear facilitation at different flanker orientation offsets and contour integration for both open and closed contours. Our results indicate that compared to matched controls, ASD participants show (i) reduced collinear facilitation, despite equivalent performance without flankers; and (ii) less benefit from closed contours in contour integration. These results indicate weaker visuospatial integration in adults with ASD and suggest that further studies using these types of paradigms would provide knowledge on how contextual processing is altered in ASD. PMID:25805985

  16. Automatic segmentation of vertebral contours from CT images using fuzzy corners.

    PubMed

    Athertya, Jiyo S; Saravana Kumar, G

    2016-05-01

    Automatic segmentation of bone in computed tomography (CT) images is critical for the implementation of computer-assisted diagnosis which has increasing potential in the evaluation of various spine disorders. Of the many techniques available for delineating the region of interest (ROI), active contour methods (ACM) are well-established techniques that are used to segment medical images. The initialization for these methods is either through manual intervention or by applying a global threshold, thus making them semi-automatic in nature. The paper presents a methodology for automatic contour initialization in ACM and demonstrates the applicability of the method for medical image segmentation from spinal CT images. Initially, a set of feature markers from the image is extracted to construct an initial contour for the ACM. A fuzzified corner metric, based on image intensity, is proposed to identify the feature markers to be enclosed by the contour. A concave hull based on α shape, is constructed using these fuzzy corners to give the initial contour. The proposed method was evaluated against conventional feature detectors and other initialization methods. The results show the method׳s robust performance in the presence of simulated Gaussian noise levels. The method enables the ACM to efficiently converge to the ground truth segmentation. The reference standard for comparison was the annotated images from a radiologist, and the Dice coefficient and Hausdorff distance measures were used to evaluate the segmentation. PMID:27017068

  17. Applying successful near mission operations approaches and refining for contour mission operations

    NASA Astrophysics Data System (ADS)

    Holdridge, Mark E.

    2003-01-01

    On February 17, 1996, the first NASA Discovery Class Mission to launch, the Near Earth Asteroid Rendezvous (NEAR) spacecraft, began its journey to the asteroid Eros. NEAR is the first planetary spacecraft to be designed and operated by the Johns Hopkins University Applied Physics Laboratory (JHU/APL). In July 2002, the comet nucleus tour (CONTOUR) spacecraft, the second planetary spacecraft to be built and operated at JHUAPL and the 6th in the series of NASA Discovery Class Missions, will be launched. Both NEAR and CONTOUR share ambitious "Faster, Better, Cheaper" goals. Furthermore, with both missions being developed and operated at the same institution, a unique opportunity exists to refine CONTOUR designs and operational practices based on 5 years of NEAR operational experience. This paper provides an overview of designs and operational practices implemented by JHU/APL to safely and effectively conduct the NEAR mission. This paper discusses how these will be applied to the CONTOUR mission and what improvements are planned. It also discusses the unique challenges CONTOUR possesses for operating a 4 year mission with widely varying operations activity levels at low cost.

  18. Collinear facilitation and contour integration in autism: evidence for atypical visual integration.

    PubMed

    Jachim, Stephen; Warren, Paul A; McLoughlin, Niall; Gowen, Emma

    2015-01-01

    Autism spectrum disorder (ASD) is a neurodevelopmental disorder characterized by impaired social interaction, atypical communication and a restricted repertoire of interests and activities. Altered sensory and perceptual experiences are also common, and a notable perceptual difference between individuals with ASD and controls is their superior performance in visual tasks where it may be beneficial to ignore global context. This superiority may be the result of atypical integrative processing. To explore this claim we investigated visual integration in adults with ASD (diagnosed with Asperger's Syndrome) using two psychophysical tasks thought to rely on integrative processing-collinear facilitation and contour integration. We measured collinear facilitation at different flanker orientation offsets and contour integration for both open and closed contours. Our results indicate that compared to matched controls, ASD participants show (i) reduced collinear facilitation, despite equivalent performance without flankers; and (ii) less benefit from closed contours in contour integration. These results indicate weaker visuospatial integration in adults with ASD and suggest that further studies using these types of paradigms would provide knowledge on how contextual processing is altered in ASD. PMID:25805985

  19. Time-domain filtered-x-Newton narrowband algorithms for active isolation of frequency-fluctuating vibration

    NASA Astrophysics Data System (ADS)

    Li, Yan; He, Lin; Shuai, Chang-geng; Wang, Fei

    2016-04-01

    A time-domain filtered-x Newton narrowband algorithm (the Fx-Newton algorithm) is proposed to address three major problems in active isolation of machinery vibration: multiple narrowband components, MIMO coupling, and amplitude and frequency fluctuations. In this algorithm, narrowband components are extracted by narrowband-pass filters (NBPF) and independently controlled by multi-controllers, and fast convergence of the control algorithm is achieved by inverse secondary-path filtering of the extracted sinusoidal reference signal and its orthogonal component using L×L numbers of 2nd-order filters in the time domain. Controller adapting and control signal generation are also implemented in the time domain, to ensure good real-time performance. The phase shift caused by narrowband filter is compensated online to improve the robustness of control system to frequency fluctuations. A double-reference Fx-Newton algorithm is also proposed to control double sinusoids in the same frequency band, under the precondition of acquiring two independent reference signals. Experiments are conducted with an MIMO single-deck vibration isolation system on which a 200 kW ship diesel generator is mounted, and the algorithms are tested under the vibration alternately excited by the diesel generator and inertial shakers. The results of control over sinusoidal vibration excited by inertial shakers suggest that the Fx-Newton algorithm with NBPF have much faster convergence rate and better attenuation effect than the Fx-LMS algorithm. For swept, frequency-jumping, double, double frequency-swept and double frequency-jumping sinusoidal vibration, and multiple high-level harmonics in broadband vibration excited by the diesel generator, the proposed algorithms also demonstrate large vibration suppression at fast convergence rate, and good robustness to vibration with frequency fluctuations.

  20. Response priming evidence for feedforward processing of snake contours but not of ladder contours and textures.

    PubMed

    Schmidt, Filipp; Vancleef, Kathleen

    2016-09-01

    In contour integration, increased difficulty in detection and shape discrimination of a chain of parallel elements (a ladder contour) compared to collinear elements (a snake contour) suggests more extensive processing of ladders than of snakes. In addition, conceptual similarities between ladders and textures - which also involve grouping of parallel elements - raises the question whether ladder and texture processing requires feedback from higher visual areas while snakes are processed in a fast feedforward sweep. We tested this in a response priming paradigm, where participants responded as quickly and accurately as possible to the orientation of a diagonal contour in a Gabor array (target). The diagonal was defined either by a snake, ladder, texture, or a continuous line. The target was preceded with varying stimulus onset asynchrony (SOA) by a prime that was either a snake, ladder, or texture, and was consistent or inconsistent to the response demands of the target. Resulting priming effects clearly distinguished between processing of snakes, ladders, and textures. Effects generally increased with SOA but were stronger for snakes and textures compared to ladders. Importantly, only priming effects for snakes were fully present already in the fastest response times, in accordance with a simple feedforward processing model. We conclude that snakes, ladders, and textures do not share similar processing characteristics, with snakes exhibiting a pronounced processing advantage. PMID:25771400

  1. CONTOUR; a modification of G.I. Evenden's general purpose contouring program

    USGS Publications Warehouse

    Godson, R.H.; Webring, M.W.

    1982-01-01

    A contouring program written for the DEC-10 computer (Evenden, 1975) has been modified and enhanced to operate on a Honeywell Multics 68/80 computer. The program uses a device independent plotting system (Wahl, 1977) so that output can be directed to any of several plotting devices by simply specifying one input variable.

  2. Memory for pure tone sequences without contour.

    PubMed

    Lefebvre, Christine; Jolicœur, Pierre

    2016-06-01

    We presented pure tones interspersed with white noise sounds to disrupt contour perception in an acoustic short-term memory (ASTM) experiment during which we recorded the electroencephalogram. The memory set consisted of seven stimuli, 0, 1, 2, 3, or 4 of which were to-be-remembered tones. We estimated each participant׳s capacity, K, for each set size and measured the amplitude of the SAN (sustained anterior negativity, an ERP related to acoustic short-term memory). We correlated their K slopes with their SAN amplitude slopes as a function of set size, and found a significant link between performance and the SAN: a larger increase in SAN amplitude was linked with a larger number of stimuli maintained in ASTM. The SAN decreased in amplitude in the later portion of the silent retention interval, but the correlation between the SAN and capacity remained strong. These results show the SAN is not an index of contour but rather an index of the maintenance of individual objects in STM. This article is part of a Special Issue entitled SI: Auditory working memory. PMID:26903419

  3. Algorithms and Algorithmic Languages.

    ERIC Educational Resources Information Center

    Veselov, V. M.; Koprov, V. M.

    This paper is intended as an introduction to a number of problems connected with the description of algorithms and algorithmic languages, particularly the syntaxes and semantics of algorithmic languages. The terms "letter, word, alphabet" are defined and described. The concept of the algorithm is defined and the relation between the algorithm and…

  4. GASAKe: forecasting landslide activations by a genetic-algorithms-based hydrological model

    NASA Astrophysics Data System (ADS)

    Terranova, O. G.; Gariano, S. L.; Iaquinta, P.; Iovine, G. G. R.

    2015-07-01

    GASAKe is a new hydrological model aimed at forecasting the triggering of landslides. The model is based on genetic algorithms and allows one to obtain thresholds for the prediction of slope failures using dates of landslide activations and rainfall series. It can be applied to either single landslides or a set of similar slope movements in a homogeneous environment. Calibration of the model provides families of optimal, discretized solutions (kernels) that maximize the fitness function. Starting from the kernels, the corresponding mobility functions (i.e., the predictive tools) can be obtained through convolution with the rain series. The base time of the kernel is related to the magnitude of the considered slope movement, as well as to the hydro-geological complexity of the site. Generally, shorter base times are expected for shallow slope instabilities compared to larger-scale phenomena. Once validated, the model can be applied to estimate the timing of future landslide activations in the same study area, by employing measured or forecasted rainfall series. Examples of application of GASAKe to a medium-size slope movement (the Uncino landslide at San Fili, in Calabria, southern Italy) and to a set of shallow landslides (in the Sorrento Peninsula, Campania, southern Italy) are discussed. In both cases, a successful calibration of the model has been achieved, despite unavoidable uncertainties concerning the dates of occurrence of the slope movements. In particular, for the Sorrento Peninsula case, a fitness of 0.81 has been obtained by calibrating the model against 10 dates of landslide activation; in the Uncino case, a fitness of 1 (i.e., neither missing nor false alarms) has been achieved using five activations. As for temporal validation, the experiments performed by considering further dates of activation have also proved satisfactory. In view of early-warning applications for civil protection, the capability of the model to simulate the occurrences of the

  5. Automated contouring error detection based on supervised geometric attribute distribution models for radiation therapy: A general strategy

    SciTech Connect

    Chen, Hsin-Chen; Tan, Jun; Dolly, Steven; Kavanaugh, James; Harold Li, H.; Altman, Michael; Gay, Hiram; Thorstad, Wade L.; Mutic, Sasa; Li, Hua; Anastasio, Mark A.; Low, Daniel A.

    2015-02-15

    Purpose: One of the most critical steps in radiation therapy treatment is accurate tumor and critical organ-at-risk (OAR) contouring. Both manual and automated contouring processes are prone to errors and to a large degree of inter- and intraobserver variability. These are often due to the limitations of imaging techniques in visualizing human anatomy as well as to inherent anatomical variability among individuals. Physicians/physicists have to reverify all the radiation therapy contours of every patient before using them for treatment planning, which is tedious, laborious, and still not an error-free process. In this study, the authors developed a general strategy based on novel geometric attribute distribution (GAD) models to automatically detect radiation therapy OAR contouring errors and facilitate the current clinical workflow. Methods: Considering the radiation therapy structures’ geometric attributes (centroid, volume, and shape), the spatial relationship of neighboring structures, as well as anatomical similarity of individual contours among patients, the authors established GAD models to characterize the interstructural centroid and volume variations, and the intrastructural shape variations of each individual structure. The GAD models are scalable and deformable, and constrained by their respective principal attribute variations calculated from training sets with verified OAR contours. A new iterative weighted GAD model-fitting algorithm was developed for contouring error detection. Receiver operating characteristic (ROC) analysis was employed in a unique way to optimize the model parameters to satisfy clinical requirements. A total of forty-four head-and-neck patient cases, each of which includes nine critical OAR contours, were utilized to demonstrate the proposed strategy. Twenty-nine out of these forty-four patient cases were utilized to train the inter- and intrastructural GAD models. These training data and the remaining fifteen testing data sets

  6. Noninvasive and minimally invasive techniques in body contouring.

    PubMed

    Afrooz, Paul N; Pozner, Jason N; DiBernardo, Barry E

    2014-10-01

    Major surgical body contouring procedures have several inherent drawbacks, including hospitalization, anesthetic use, pain, swelling, and prolonged recovery. It is for these reasons that body contouring through noninvasive and minimally invasive methods has become one of the most alluring areas in aesthetic surgery. Patient expectations and demands have driven the field toward safer, less-invasive procedures with less discomfort, fewer complications, and a shorter recovery. In this article, the current minimally invasive and noninvasive modalities for body contouring are reviewed. PMID:25283463

  7. An adaptive integrated algorithm for active front steering and direct yaw moment control based on direct Lyapunov method

    NASA Astrophysics Data System (ADS)

    Ding, Nenggen; Taheri, Saied

    2010-10-01

    In this article, an adaptive integrated control algorithm based on active front steering and direct yaw moment control using direct Lyapunov method is proposed. Variation of cornering stiffness is considered through adaptation laws in the algorithm to ensure robustness of the integrated controller. A simple two degrees of freedom (DOF) vehicle model is used to develop the control algorithm. To evaluate the control algorithm developed here, a nonlinear eight-DOF vehicle model along with a combined-slip tyre model and a single-point preview driver model are used. Control commands are executed through correction steering angle on front wheels and braking torque applied on one of the four wheels. Simulation of a double lane change manoeuvre using Matlab®/Simulink is used for evaluation of the control algorithm. Simulation results show that the integrated control algorithm can significantly enhance vehicle stability during emergency evasive manoeuvres on various road conditions ranging from dry asphalt to very slippery packed snow road surfaces.

  8. A multi-resolution filtered-x LMS algorithm based on discrete wavelet transform for active noise control

    NASA Astrophysics Data System (ADS)

    Qiu, Z.; Lee, C.-M.; Xu, Z. H.; Sui, L. N.

    2016-01-01

    We have developed a new active control algorithm based on discrete wavelet transform (DWT) for both stationary and non-stationary noise control. First, the Mallat pyramidal algorithm is introduced to implement the DWT, which can decompose the reference signal into several sub-bands with multi-resolution and provides a perfect reconstruction (PR) procedure. To reduce the extra computational complexity introduced by DWT, an efficient strategy is proposed that updates the adaptive filter coefficients in the frequency domainDeepthi B.B using a fast Fourier transform (FFT). Based on the reference noise source, a 'Haar' wavelet is employed and by decomposing the noise signal into two sub-band (3-band), the proposed DWT-FFT-based FXLMS (DWT-FFT-FXLMS) algorithm has greatly reduced complexity and a better convergence performance compared to a time domain filtered-x least mean square (TD-FXLMS) algorithm. As a result of the outstanding time-frequency characteristics of wavelet analysis, the proposed DWT-FFT-FXLMS algorithm can effectively cancel both stationary and non-stationary noise, whereas the frequency domain FXLMS (FD-FXLMS) algorithm cannot approach this point.

  9. Application of activity pencil beam algorithm using measured distribution data of positron emitter nuclei for therapeutic SOBP proton beam

    SciTech Connect

    Miyatake, Aya; Nishio, Teiji

    2013-09-15

    Purpose: Recently, much research on imaging the clinical proton-irradiated volume using positron emitter nuclei based on target nuclear fragment reaction has been carried out. The purpose of this study is to develop an activity pencil beam (APB) algorithm for a simulation system for proton-activated positron-emitting imaging in clinical proton therapy using spread-out Bragg peak (SOBP) beams.Methods: The target nuclei of activity distribution calculations are {sup 12}C nuclei, {sup 16}O nuclei, and {sup 40}Ca nuclei, which are the main elements in a human body. Depth activity distributions with SOBP beam irradiations were obtained from the material information of ridge filter (RF) and depth activity distributions of compounds of the three target nuclei measured by BOLPs-RGp (beam ON-LINE PET system mounted on a rotating gantry port) with mono-energetic Bragg peak (MONO) beam irradiations. The calculated data of depth activity distributions with SOBP beam irradiations were sorted in terms of kind of nucleus, energy of proton beam, SOBP width, and thickness of fine degrader (FD), which were verified. The calculated depth activity distributions with SOBP beam irradiations were compared with the measured ones. APB kernels were made from the calculated depth activity distributions with SOBP beam irradiations to construct a simulation system using the APB algorithm for SOBP beams.Results: The depth activity distributions were prepared using the material information of RF and the measured depth activity distributions with MONO beam irradiations for clinical therapy using SOBP beams. With the SOBP width widening, the distal fall-offs of depth activity distributions and the difference from the depth dose distributions were large. The shapes of the calculated depth activity distributions nearly agreed with those of the measured ones upon comparison between the two. The APB kernels of SOBP beams were prepared by making use of the data on depth activity distributions with SOBP

  10. Effects of Spatial Frequency Similarity and Dissimilarity on Contour Integration

    PubMed Central

    Persike, Malte; Meinhardt, Günter

    2015-01-01

    We examined the effects of spatial frequency similarity and dissimilarity on human contour integration under various conditions of uncertainty. Participants performed a temporal 2AFC contour detection task. Spatial frequency jitter up to 3.0 octaves was applied either to background elements, or to contour and background elements, or to none of both. Results converge on four major findings. (1) Contours defined by spatial frequency similarity alone are only scarcely visible, suggesting the absence of specialized cortical routines for shape detection based on spatial frequency similarity. (2) When orientation collinearity and spatial frequency similarity are combined along a contour, performance amplifies far beyond probability summation when compared to the fully heterogenous condition but only to a margin compatible with probability summation when compared to the fully homogenous case. (3) Psychometric functions are steeper but not shifted for homogenous contours in heterogenous backgrounds indicating an advantageous signal-to-noise ratio. The additional similarity cue therefore not so much improves contour detection performance but primarily reduces observer uncertainty about whether a potential candidate is a contour or just a false positive. (4) Contour integration is a broadband mechanism which is only moderately impaired by spatial frequency dissimilarity. PMID:26057620

  11. Contour identification with pitch and loudness cues using cochlear implants.

    PubMed

    Luo, Xin; Masterson, Megan E; Wu, Ching-Chih

    2014-01-01

    Different from speech, pitch and loudness cues may or may not co-vary in music. Cochlear implant (CI) users with poor pitch perception may use loudness contour cues more than normal-hearing (NH) listeners. Contour identification was tested in CI users and NH listeners; the five-note contours contained either pitch cues alone, loudness cues alone, or both. Results showed that NH listeners' contour identification was better with pitch cues than with loudness cues; CI users performed similarly with either cues. When pitch and loudness cues were co-varied, CI performance significantly improved, suggesting that CI users were able to integrate the two cues. PMID:24437857

  12. Aquarius Wind and SSS Retrieved Using the Combined Active-Passive Algorithm under All Weather Conditions

    NASA Astrophysics Data System (ADS)

    Yueh, S. H.; Tang, W.; Fore, A.; Freedman, A. P.; Neumann, G.; Hayashi, A.; Lagerloef, G. S.

    2012-12-01

    The Aquarius/SACD satellite was launched on June 10, 2011, and the Aquarius instrument has been operational since August 25, 2012. Aquarius is a combined passive/active L-band microwave instrument developed to map the salinity field at the surface of the ocean from space. The primary science objective of the Aquarius mission is to monitor the seasonal and interannual variation of the large scale features of the sea surface salinity (SSS) field in the open ocean with a spatial resolution of 150 km and a retrieval accuracy of 0.2 psu globally on a monthly basis. The measurement principle is based on the response of the L-band (1.413 GHz) sea surface brightness temperatures to sea surface salinity. To achieve the required 0.2 psu accuracy, the impact of sea surface roughness (e.g. wind-generated ripples and waves), along with several additional factors impacting the observed brightness temperature, must be corrected to better than a few tenths of a degree Kelvin. To this end, Aquarius includes a scatterometer to help correct for this surface roughness effect. In this paper we describe the characteristics and error estimates of the ocean surface wind vector and SSS retrieved using the Combined Active-Passive (CAP) algorithm, which does not use the NCEP wind for correcting Aquarius' brightness temperatures. Error estimates using the triple collocation analyses of SSM/I, NCEP and Aquarius-CAP winds indicate that the retrieved Aquarius wind speed accuracy is excellent with a random error of about 0.75 m s-1 for rain-free conditions. For rainy conditions when there were no SSM/I wind retrievals, we used the WindSAT-AW or ASCAT winds together with NCEP and CAP winds for triple collocation analysis. It is shown that Aquarius CAP wind speed is the most accurate under rainy conditions with RMS error below 2 m/s at 10 mm/h rain rate. In comparison with the NCEP wind direction, the Aquarius wind direction retrievals also appear accurate for above 10 m s-1. We further examine the

  13. Detection of low contrasted membranes in electron microscope images: statistical contour validation

    NASA Astrophysics Data System (ADS)

    Karathanou, A.; Buessler, J.-L.; Kihl, H.; Urban, J.-P.

    2009-02-01

    Images of biological objects in transmission electron microscopy (TEM) are particularly noisy and low contrasted, making their processing a challenging task to accomplish. During these last years, several software tools were conceived for the automatic or semi-automatic acquisition of TEM images. However, tools for the automatic analysis of these images are still rare. Our study concerns in particular the automatic identification of artificial membranes at medium magnification for the control of an electron microscope. We recently proposed a segmentation strategy in order to detect the regions of interest. In this paper, we introduce a complementary technique to improve contour recognition by a statistical validation algorithm. Our technique explores the profile transition between two objects. A transition is validated if there exists a gradient orthogonal to the contour that is statistically significant.

  14. Simulation and experimental tests on active mass damper control system based on Model Reference Adaptive Control algorithm

    NASA Astrophysics Data System (ADS)

    Tu, Jianwei; Lin, Xiaofeng; Tu, Bo; Xu, Jiayun; Tan, Dongmei

    2014-09-01

    In the process of sudden natural disasters (such as earthquake or typhoon), the active mass damper (AMD) system can reduce the structural vibration response optimally, which serves as a frequently applied but less mature vibration-reducing technology in wind and earthquake resistance of high-rise buildings. As the core of this technology, the selection of control algorithm is extremely challenging due to the uncertainty of structural parameters and the randomness of external loads. It is not necessary for the Model Reference Adaptive Control (MRAC) based on the Minimal Controller Synthesis (MCS) algorithm to know in advance the structural parameters, which produces special advantages in conditions of real-time change of system parameters, uncertain external disturbance, and the nonlinear dynamic system. This paper studies the application of the MRAC into the AMD active control system. The principle of MRAC algorithm is recommended and the dynamic model and the motion differential equation of AMD system based on MRAC is established under seismic excitation. The simulation analysis for linear and nonlinear structures when the structural stiffness is degenerated is performed under AMD system controlled by MRAC algorithm. To verify the validity of the MRAC over the AMD system, experimental tests are carried out on a linear structure and a structure with variable stiffness with the AMD system under seismic excitation on the shake table, and the experimental results are compared with those of the traditional pole assignment control algorithm.

  15. Integration of an Active Sensor Algorithm with Soil-Based Management Zones for Nitrogen Management in Corn

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Active crop canopy sensors have been studied as a possible proximal sensing tool to assess in-season plant N status and direct spatially-variable N applications, and thereby increase NUE compared to uniform N application. A sensor-based N application algorithm was previously developed on small plots...

  16. Gamma-ray active galactic nucleus type through machine-learning algorithms

    NASA Astrophysics Data System (ADS)

    Hassan, T.; Mirabal, N.; Contreras, J. L.; Oya, I.

    2013-01-01

    The Fermi Gamma-ray Space Telescope (Fermi) is producing the most detailed inventory of the gamma-ray sky to date. Despite tremendous achievements approximately 25 per cent of all Fermi extragalactic sources in the Second Fermi Large Area Telescope Catalogue (2FGL) are listed as active galactic nuclei (AGN) of uncertain type. Typically, these are suspected blazar candidates without a conclusive optical spectrum or lacking spectroscopic observations. Here, we explore the use of machine-learning algorithms - random forests and support vector machines - to predict specific AGN subclass based on observed gamma-ray spectral properties. After training and testing on identified/associated AGN from the 2FGL we find that 235 out of 269 AGN of uncertain type have properties compatible with gamma-ray BL Lacertae and flat-spectrum radio quasars with accuracy rates of 85 per cent. Additionally, direct comparison of our results with class predictions made after following the infrared colour-colour space of Massaro et al. shows that the agreement rate is over four-fifths for 54 overlapping sources, providing independent cross-validation. These results can help tailor follow-up spectroscopic programmes and inform future pointed surveys with ground-based Cherenkov telescopes.

  17. Body contouring surgery for military personnel following massive weight loss.

    PubMed

    Chong, S J; Kok, Y O; Foo, C L

    2011-12-01

    The burgeoning global obesity epidemic extends to the military service, where 6-53% of military personnel are overweight. Obese military personnel who adhere to a strict training and diet regime may potentially achieve and maintain significant weight loss. They may however face physical problems such as excess skin folds causing discomfort, difficulty in uniform fitting, personal hygiene, interference with full physical activities and psychological issues such as body image dissatisfaction, low self esteem and difficulty in social acceptance. We present a case report of a highly motivated military conscript who achieved and maintained significant weight loss but had physical defects following Massive Weight Loss. Body contouring surgery was successfully utilised to correct his physical defects and allowed him to return to full physical duties. PMID:22319988

  18. Vorticity generation by contoured wall injectors

    NASA Technical Reports Server (NTRS)

    Waitz, Ian A.; Marble, Frank E.; Zukoski, Edward E.

    1992-01-01

    A class of contoured wall fuel injectors was designed to enable shock-enhancement of hypervelocity mixing for supersonic combustion ramjet applications. Previous studies of these geometries left unresolved questions concerning the relative importance of various axial vorticity sources in mixing the injectant with the freestream. The present study is a numerical simulation of two generic fuel injectors which is aimed at elucidating the relative roles of axial vorticity sources including: baroclinic torque through shock-impingement, cross-stream shear, turning of boundary layer vorticity, shock curvature, and diffusive flux. Both the magnitude of the circulation, and the location of vorticity with respect to the mixing interface were considered. Baroclinic torque and cross-stream shear were found to be most important in convectively mixing the injectant with the freestream, with the former providing for deposition of vorticity directly on the fuel/air interface.

  19. The aperture problem in contoured stimuli

    PubMed Central

    Kane, David; Bex, Peter J.; Dakin, Steven C.

    2010-01-01

    A moving object elicits responses from V1 neurons tuned to a broad range of locations, directions, and spatiotemporal frequencies. Global pooling of such signals can overcome their intrinsic ambiguity in relation to the object’s direction/speed (the “aperture problem”); here we examine the role of low-spatial frequencies (SF) and second-order statistics in this process. Subjects made a 2AFC fine direction-discrimination judgement of ‘naturally’ contoured stimuli viewed rigidly translating behind a series of small circular apertures. This configuration allowed us to manipulate the scene in several ways; by randomly switching which portion of the stimulus was presented behind each aperture or by occluding certain spatial frequency bands. We report that global motion integration is (a) largely insensitive to the second-order statistics of such stimuli and (b) is rigidly broadband even in the presence of a disrupted low SF component. PMID:19810794

  20. Impact of contour on aesthetic judgments and approach-avoidance decisions in architecture.

    PubMed

    Vartanian, Oshin; Navarrete, Gorka; Chatterjee, Anjan; Fich, Lars Brorson; Leder, Helmut; Modroño, Cristián; Nadal, Marcos; Rostrup, Nicolai; Skov, Martin

    2013-06-18

    On average, we urban dwellers spend about 90% of our time indoors, and share the intuition that the physical features of the places we live and work in influence how we feel and act. However, there is surprisingly little research on how architecture impacts behavior, much less on how it influences brain function. To begin closing this gap, we conducted a functional magnetic resonance imaging study to examine how systematic variation in contour impacts aesthetic judgments and approach-avoidance decisions, outcome measures of interest to both architects and users of spaces alike. As predicted, participants were more likely to judge spaces as beautiful if they were curvilinear than rectilinear. Neuroanatomically, when contemplating beauty, curvilinear contour activated the anterior cingulate cortex exclusively, a region strongly responsive to the reward properties and emotional salience of objects. Complementing this finding, pleasantness--the valence dimension of the affect circumplex--accounted for nearly 60% of the variance in beauty ratings. Furthermore, activation in a distributed brain network known to underlie the aesthetic evaluation of different types of visual stimuli covaried with beauty ratings. In contrast, contour did not affect approach-avoidance decisions, although curvilinear spaces activated the visual cortex. The results suggest that the well-established effect of contour on aesthetic preference can be extended to architecture. Furthermore, the combination of our behavioral and neural evidence underscores the role of emotion in our preference for curvilinear objects in this domain. PMID:23754408

  1. Impact of contour on aesthetic judgments and approach-avoidance decisions in architecture

    PubMed Central

    Vartanian, Oshin; Navarrete, Gorka; Chatterjee, Anjan; Fich, Lars Brorson; Leder, Helmut; Modroño, Cristián; Nadal, Marcos; Rostrup, Nicolai; Skov, Martin

    2013-01-01

    On average, we urban dwellers spend about 90% of our time indoors, and share the intuition that the physical features of the places we live and work in influence how we feel and act. However, there is surprisingly little research on how architecture impacts behavior, much less on how it influences brain function. To begin closing this gap, we conducted a functional magnetic resonance imaging study to examine how systematic variation in contour impacts aesthetic judgments and approach-avoidance decisions, outcome measures of interest to both architects and users of spaces alike. As predicted, participants were more likely to judge spaces as beautiful if they were curvilinear than rectilinear. Neuroanatomically, when contemplating beauty, curvilinear contour activated the anterior cingulate cortex exclusively, a region strongly responsive to the reward properties and emotional salience of objects. Complementing this finding, pleasantness—the valence dimension of the affect circumplex—accounted for nearly 60% of the variance in beauty ratings. Furthermore, activation in a distributed brain network known to underlie the aesthetic evaluation of different types of visual stimuli covaried with beauty ratings. In contrast, contour did not affect approach-avoidance decisions, although curvilinear spaces activated the visual cortex. The results suggest that the well-established effect of contour on aesthetic preference can be extended to architecture. Furthermore, the combination of our behavioral and neural evidence underscores the role of emotion in our preference for curvilinear objects in this domain. PMID:23754408

  2. CMOS image sensor with contour enhancement

    NASA Astrophysics Data System (ADS)

    Meng, Liya; Lai, Xiaofeng; Chen, Kun; Yuan, Xianghui

    2010-10-01

    Imitating the signal acquisition and processing of vertebrate retina, a CMOS image sensor with bionic pre-processing circuit is designed. Integration of signal-process circuit on-chip can reduce the requirement of bandwidth and precision of the subsequent interface circuit, and simplify the design of the computer-vision system. This signal pre-processing circuit consists of adaptive photoreceptor, spatial filtering resistive network and Op-Amp calculation circuit. The adaptive photoreceptor unit with a dynamic range of approximately 100 dB has a good self-adaptability for the transient changes in light intensity instead of intensity level itself. Spatial low-pass filtering resistive network used to mimic the function of horizontal cell, is composed of the horizontal resistor (HRES) circuit and OTA (Operational Transconductance Amplifier) circuit. HRES circuit, imitating dendrite of the neuron cell, comprises of two series MOS transistors operated in weak inversion region. Appending two diode-connected n-channel transistors to a simple transconductance amplifier forms the OTA Op-Amp circuit, which provides stable bias voltage for the gate of MOS transistors in HRES circuit, while serves as an OTA voltage follower to provide input voltage for the network nodes. The Op-Amp calculation circuit with a simple two-stage Op-Amp achieves the image contour enhancing. By adjusting the bias voltage of the resistive network, the smoothing effect can be tuned to change the effect of image's contour enhancement. Simulations of cell circuit and 16×16 2D circuit array are implemented using CSMC 0.5μm DPTM CMOS process.

  3. Responses in early visual areas to contour integration are context dependent

    PubMed Central

    Qiu, Cheng; Burton, Philip C.; Kersten, Daniel; Olman, Cheryl A.

    2016-01-01

    It has been shown that early visual areas are involved in contour processing. However, it is not clear how local and global context interact to influence responses in those areas, nor has the interarea coordination that yields coherent structural percepts been fully studied, especially in human observers. In this study, we used functional magnetic resonance imaging (fMRI) to measure activity in early visual cortex while observers performed a contour detection task in which alignment of Gabor elements and background clutter were manipulated. Six regions of interest (two regions, containing either the cortex representing the target or the background clutter, in each of areas V1, V2, and V3) were predefined using separate target versus background functional localizer scans. The first analysis using a general linear model showed that in the presence of background clutter, responses in V1 and V2 target regions of interest were significantly stronger to aligned than unaligned contours, whereas when background clutter was absent, no significant difference was observed. The second analysis using interarea correlations showed that with background clutter, there was an increase in V1–V2 coordination within the target regions when perceiving aligned versus unaligned contours; without clutter, however, correlations between V1 and V2 were similar no matter whether aligned contours were present or not. Both the average response magnitude and the connectivity analysis suggest different mechanisms support contour processing with or without background distractors. Coordination between V1 and V2 may play a major role in coherent structure perception, especially with complex scene organization. PMID:27366994

  4. Fabrication of Fresnel microlens with excimer laser contour ablation

    NASA Astrophysics Data System (ADS)

    Wójcik, Michał R.; Antończak, Arkadiusz J.; Kozioł, Paweł E.; Łazarek, Łukasz K.; Stepak, Bogusz D.; Abramski, Krzysztof M.

    2014-08-01

    Laser micromachining systems based on excimer lasers are usually oriented to work with mask projection regime because of the low pulse repetition rate as well as large beam aperture of the laser source. In case of fabricating of the complex 3D structures, this approach introduces a number of limitations. Alternative solution might be usage of direct writing laser mode. Some examples of the so called contour ablation approach for fabricating microlenses with an absolutely monotonically changing cross-sectional profile are presented in the literature. Based on this idea and introducing new variables like automatic mask selection as well as optimizing process algorithms led us to obtain more versatile method for shape approximation. Hence, there were fabricated structures with cross-sectional profiles described as functions that are monotonic on specified intervals such as Fresnel microlenses. In this paper we describe approximation of process parameters for obtaining desired cross-sectional profiles and finally fabrication of few exemplary microlenses. All structures were characterized by a digital optical microscopy and compared to the given profiles. The accuracy of reproduction of the desired structures at the level of single microns was achieved.

  5. New method of contour-based mask-shape compiler

    NASA Astrophysics Data System (ADS)

    Matsuoka, Ryoichi; Sugiyama, Akiyuki; Onizawa, Akira; Sato, Hidetoshi; Toyoda, Yasutaka

    2007-10-01

    We have developed a new method of accurately profiling a mask shape by utilizing a Mask CD-SEM. The method is intended to realize high accuracy, stability and reproducibility of the Mask CD-SEM adopting an edge detection algorithm as the key technology used in CD-SEM for high accuracy CD measurement. In comparison with a conventional image processing method for contour profiling, it is possible to create the profiles with much higher accuracy which is comparable with CD-SEM for semiconductor device CD measurement. In this report, we will introduce the algorithm in general, the experimental results and the application in practice. As shrinkage of design rule for semiconductor device has further advanced, an aggressive OPC (Optical Proximity Correction) is indispensable in RET (Resolution Enhancement Technology). From the view point of DFM (Design for Manufacturability), a dramatic increase of data processing cost for advanced MDP (Mask Data Preparation) for instance and surge of mask making cost have become a big concern to the device manufacturers. In a sense, it is a trade-off between the high accuracy RET and the mask production cost, while it gives a significant impact on the semiconductor market centered around the mask business. To cope with the problem, we propose the best method for a DFM solution in which two dimensional data are extracted for an error free practical simulation by precise reproduction of a real mask shape in addition to the mask data simulation. The flow centering around the design data is fully automated and provides an environment where optimization and verification for fully automated model calibration with much less error is available. It also allows complete consolidation of input and output functions with an EDA system by constructing a design data oriented system structure. This method therefore is regarded as a strategic DFM approach in the semiconductor metrology.

  6. Compressing industrial computed tomography images by means of contour coding

    NASA Astrophysics Data System (ADS)

    Jiang, Haina; Zeng, Li

    2013-10-01

    An improved method for compressing industrial computed tomography (CT) images is presented. To have higher resolution and precision, the amount of industrial CT data has become larger and larger. Considering that industrial CT images are approximately piece-wise constant, we develop a compression method based on contour coding. The traditional contour-based method for compressing gray images usually needs two steps. The first is contour extraction and then compression, which is negative for compression efficiency. So we merge the Freeman encoding idea into an improved method for two-dimensional contours extraction (2-D-IMCE) to improve the compression efficiency. By exploiting the continuity and logical linking, preliminary contour codes are directly obtained simultaneously with the contour extraction. By that, the two steps of the traditional contour-based compression method are simplified into only one. Finally, Huffman coding is employed to further losslessly compress preliminary contour codes. Experimental results show that this method can obtain a good compression ratio as well as keeping satisfactory quality of compressed images.

  7. UNCERTAINTY ANALYSIS OF RUNOFF ESTIMATES FROM A RUNOFF CONTOUR MAP

    EPA Science Inventory

    The US EPA in cooperation with the USGS conducted an analysis to quantify the uncertainty associated with interpolatinq runoff to specific sites using a runoff contour map. e interpolated runoff to 93 gaged watersheds from a runoff contour map using 1) hand interpolation to the w...

  8. 32 CFR 707.5 - Underway replenishment contour lights.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 32 National Defense 5 2011-07-01 2011-07-01 false Underway replenishment contour lights. 707.5... RULES WITH RESPECT TO ADDITIONAL STATION AND SIGNAL LIGHTS § 707.5 Underway replenishment contour lights... underway replenishment operations, either red or blue lights at delivery-ship-deck-edge extremities....

  9. 32 CFR 707.5 - Underway replenishment contour lights.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 32 National Defense 5 2013-07-01 2013-07-01 false Underway replenishment contour lights. 707.5... RULES WITH RESPECT TO ADDITIONAL STATION AND SIGNAL LIGHTS § 707.5 Underway replenishment contour lights... underway replenishment operations, either red or blue lights at delivery-ship-deck-edge extremities....

  10. 32 CFR 707.5 - Underway replenishment contour lights.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 32 National Defense 5 2012-07-01 2012-07-01 false Underway replenishment contour lights. 707.5... RULES WITH RESPECT TO ADDITIONAL STATION AND SIGNAL LIGHTS § 707.5 Underway replenishment contour lights... underway replenishment operations, either red or blue lights at delivery-ship-deck-edge extremities....

  11. 32 CFR 707.5 - Underway replenishment contour lights.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 32 National Defense 5 2014-07-01 2014-07-01 false Underway replenishment contour lights. 707.5... RULES WITH RESPECT TO ADDITIONAL STATION AND SIGNAL LIGHTS § 707.5 Underway replenishment contour lights... underway replenishment operations, either red or blue lights at delivery-ship-deck-edge extremities....

  12. 32 CFR 707.5 - Underway replenishment contour lights.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 32 National Defense 5 2010-07-01 2010-07-01 false Underway replenishment contour lights. 707.5... RULES WITH RESPECT TO ADDITIONAL STATION AND SIGNAL LIGHTS § 707.5 Underway replenishment contour lights... underway replenishment operations, either red or blue lights at delivery-ship-deck-edge extremities....

  13. Synthetic Molecular Machines for Active Self-Assembly: Prototype Algorithms, Designs, and Experimental Study

    NASA Astrophysics Data System (ADS)

    Dabby, Nadine L.

    Computer science and electrical engineering have been the great success story of the twentieth century. The neat modularity and mapping of a language onto circuits has led to robots on Mars, desktop computers and smartphones. But these devices are not yet able to do some of the things that life takes for granted: repair a scratch, reproduce, regenerate, or grow exponentially fast--all while remaining functional. This thesis explores and develops algorithms, molecular implementations, and theoretical proofs in the context of "active self-assembly" of molecular systems. The long-term vision of active self-assembly is the theoretical and physical implementation of materials that are composed of reconfigurable units with the programmability and adaptability of biology's numerous molecular machines. En route to this goal, we must first find a way to overcome the memory limitations of molecular systems, and to discover the limits of complexity that can be achieved with individual molecules. One of the main thrusts in molecular programming is to use computer science as a tool for figuring out what can be achieved. While molecular systems that are Turing-complete have been demonstrated [Winfree, 1996], these systems still cannot achieve some of the feats biology has achieved. One might think that because a system is Turing-complete, capable of computing "anything," that it can do any arbitrary task. But while it can simulate any digital computational problem, there are many behaviors that are not "computations" in a classical sense, and cannot be directly implemented. Examples include exponential growth and molecular motion relative to a surface. Passive self-assembly systems cannot implement these behaviors because (a) molecular motion relative to a surface requires a source of fuel that is external to the system, and (b) passive systems are too slow to assemble exponentially-fast-growing structures. We call these behaviors "energetically incomplete" programmable

  14. Bringing SEM-contour based OPC to production

    NASA Astrophysics Data System (ADS)

    Weisbuch, François; Koh, Kar Kit; Jantzen, Kenneth

    2014-03-01

    Calibrating an accurate OPC model usually requires a lot of one-dimensional CD-SEM measurements. A promising alternative is to use a SEM image contour approach but many challenges remain to implement this technique for production. In this work a specific flow is presented to get good and reliable contours well matched with traditional CDSEM measurements. Furthermore this work investigates the importance of site selection (number, type, image space coverage) for a successful contour-based OPC model. Finally the comparison of conventional and contour based models takes into account the calibration and verification performances of both models with a possible cross verification between model data sets. Specific advantages of contour based model are also discussed.

  15. Children's perception of certain musical properties: scale and contour.

    PubMed

    Pick, A D; Palmer, C F; Hennessy, B L; Unze, M G; Jones, R K; Richardson, R M

    1988-02-01

    Children's perception of scale and contour in melodies was investigated in five studies. Experimental tasks included judging transposed renditions of melodies (Studies 1 and 3), discriminating between transposed renditions of a melody (Study 2), judging contour-preserving transformations of melodies (Study 4), and judging similarity to a familiar target melody of transformations preserving rhythm or rhythm and contour (Study 5). The first and second studies showed that young children detect key transposition changes even in familiar melodies and they perceive similarity over key transpositions even in unfamiliar melodies. Young children also are sensitive to melodic contour over transformations that preserve it (Study 5), yet they distinguish spontaneously between melodies with the same contour and different intervals (Study 4). The key distance effect reported in the literature did not occur in the tasks of this investigation (Studies 1 and 3), and it may be apparent only for melodies shorter or more impoverished than those used here. PMID:3343585

  16. Some distinguishing characteristics of contour and texture phenomena in images

    NASA Technical Reports Server (NTRS)

    Jobson, Daniel J.

    1992-01-01

    The development of generalized contour/texture discrimination techniques is a central element necessary for machine vision recognition and interpretation of arbitrary images. Here, the visual perception of texture, selected studies of texture analysis in machine vision, and diverse small samples of contour and texture are all used to provide insights into the fundamental characteristics of contour and texture. From these, an experimental discrimination scheme is developed and tested on a battery of natural images. The visual perception of texture defined fine texture as a subclass which is interpreted as shading and is distinct from coarse figural similarity textures. Also, perception defined the smallest scale for contour/texture discrimination as eight to nine visual acuity units. Three contour/texture discrimination parameters were found to be moderately successful for this scale discrimination: (1) lightness change in a blurred version of the image, (2) change in lightness change in the original image, and (3) percent change in edge counts relative to local maximum.

  17. Framework of a Contour Based Depth Map Coding Method

    NASA Astrophysics Data System (ADS)

    Wang, Minghui; He, Xun; Jin, Xin; Goto, Satoshi

    Stereo-view and multi-view video formats are heavily investigated topics given their vast application potential. Depth Image Based Rendering (DIBR) system has been developed to improve Multiview Video Coding (MVC). Depth image is introduced to synthesize virtual views on the decoder side in this system. Depth image is a piecewise image, which is filled with sharp contours and smooth interior. Contours in a depth image show more importance than interior in view synthesis process. In order to improve the quality of the synthesized views and reduce the bitrate of depth image, a contour based coding strategy is proposed. First, depth image is divided into layers by different depth value intervals. Then regions, which are defined as the basic coding unit in this work, are segmented from each layer. The region is further divided into the contour and the interior. Two different procedures are employed to code contours and interiors respectively. A vector-based strategy is applied to code the contour lines. Straight lines in contours cost few of bits since they are regarded as vectors. Pixels, which are out of straight lines, are coded one by one. Depth values in the interior of a region are modeled by a linear or nonlinear formula. Coefficients in the formula are retrieved by regression. This process is called interior painting. Unlike conventional block based coding method, the residue between original frame and reconstructed frame (by contour rebuilt and interior painting) is not sent to decoder. In this proposal, contour is coded in a lossless way whereas interior is coded in a lossy way. Experimental results show that the proposed Contour Based Depth map Coding (CBDC) achieves a better performance than JMVC (reference software of MVC) in the high quality scenarios.

  18. Investigation of trunk muscle activities during lifting using a multi-objective optimization-based model and intelligent optimization algorithms.

    PubMed

    Ghiasi, Mohammad Sadegh; Arjmand, Navid; Boroushaki, Mehrdad; Farahmand, Farzam

    2016-03-01

    A six-degree-of-freedom musculoskeletal model of the lumbar spine was developed to predict the activity of trunk muscles during light, moderate and heavy lifting tasks in standing posture. The model was formulated into a multi-objective optimization problem, minimizing the sum of the cubed muscle stresses and maximizing the spinal stability index. Two intelligent optimization algorithms, i.e., the vector evaluated particle swarm optimization (VEPSO) and nondominated sorting genetic algorithm (NSGA), were employed to solve the optimization problem. The optimal solution for each task was then found in the way that the corresponding in vivo intradiscal pressure could be reproduced. Results indicated that both algorithms predicted co-activity in the antagonistic abdominal muscles, as well as an increase in the stability index when going from the light to the heavy task. For all of the light, moderate and heavy tasks, the muscles' activities predictions of the VEPSO and the NSGA were generally consistent and in the same order of the in vivo electromyography data. The proposed methodology is thought to provide improved estimations for muscle activities by considering the spinal stability and incorporating the in vivo intradiscal pressure data. PMID:26088358

  19. A Clinical Algorithm to Identify HIV Patients at High Risk for Incident Active Tuberculosis: A Prospective 5-Year Cohort Study

    PubMed Central

    Lee, Susan Shin-Jung; Lin, Hsi-Hsun; Tsai, Hung-Chin; Su, Ih-Jen; Yang, Chin-Hui; Sun, Hsin-Yun; Hung, Chien-Chin; Sy, Cheng-Len; Wu, Kuan-Sheng; Chen, Jui-Kuang; Chen, Yao-Shen; Fang, Chi-Tai

    2015-01-01

    Background Predicting the risk of tuberculosis (TB) in people living with HIV (PLHIV) using a single test is currently not possible. We aimed to develop and validate a clinical algorithm, using baseline CD4 cell counts, HIV viral load (pVL), and interferon-gamma release assay (IGRA), to identify PLHIV who are at high risk for incident active TB in low-to-moderate TB burden settings where highly active antiretroviral therapy (HAART) is routinely provided. Materials and Methods A prospective, 5-year, cohort study of adult PLHIV was conducted from 2006 to 2012 in two hospitals in Taiwan. HAART was initiated based on contemporary guidelines (CD4 count < = 350/μL). Cox regression was used to identify the predictors of active TB and to construct the algorithm. The validation cohorts included 1455 HIV-infected individuals from previous published studies. Area under the receiver operating characteristic (ROC) curve was calculated. Results Seventeen of 772 participants developed active TB during a median follow-up period of 5.21 years. Baseline CD4 < 350/μL or pVL ≥ 100,000/mL was a predictor of active TB (adjusted HR 4.87, 95% CI 1.49–15.90, P = 0.009). A positive baseline IGRA predicted TB in patients with baseline CD4 ≥ 350/μL and pVL < 100,000/mL (adjusted HR 6.09, 95% CI 1.52–24.40, P = 0.01). Compared with an IGRA-alone strategy, the algorithm improved the sensitivity from 37.5% to 76.5%, the negative predictive value from 98.5% to 99.2%. Compared with an untargeted strategy, the algorithm spared 468 (60.6%) from unnecessary TB preventive treatment. Area under the ROC curve was 0.692 (95% CI: 0.587–0.798) for the study cohort and 0.792 (95% CI: 0.776–0.808) and 0.766 in the 2 validation cohorts. Conclusions A validated algorithm incorporating the baseline CD4 cell count, HIV viral load, and IGRA status can be used to guide targeted TB preventive treatment in PLHIV in low-to-moderate TB burden settings where HAART is routinely provided to all PLHIV. The

  20. Mouse Ability to Perceive Subjective Contours.

    PubMed

    Okuyama-Uchimura, Fumi; Komai, Shoji

    2016-03-01

    In contrast to the previously held notion that mice have a weak visual system, it is now generally accepted that mice can perceive rather complicated figures in various contexts such as in cognitive experiments and in social settings. Here, we show that mice could even be capable of perceiving a visual illusion--subjective contours. This illusion requires the visual system to compensate for a lack of visual information in compressed 2D images on the retina. In this experiment, we trained mice to respond appropriately to a rectangle-shaped rewarded figure of specific orientation in a two-choice visual discrimination task with a touchscreen monitor. In Transfer Test 1, mice could discriminate illusory rectangle-shaped figures significantly as compared with a figure, which did not induce illusory figures. In Transfer Test 2, the choice rate of targets decreased with imperfect illusory figures, which produced weak perception of rotated or deficient inducers. Moreover, in Transfer Test 3, mice could not discriminate the low-resolution illusory figure, which also induced weak perception. These results demonstrated the possibility that mice might be useful for investigating fundamental properties of the neural visual system. PMID:26562875

  1. Directed random polymers via nested contour integrals

    NASA Astrophysics Data System (ADS)

    Borodin, Alexei; Bufetov, Alexey; Corwin, Ivan

    2016-05-01

    We study the partition function of two versions of the continuum directed polymer in 1 + 1 dimension. In the full-space version, the polymer starts at the origin and is free to move transversally in R, and in the half-space version, the polymer starts at the origin but is reflected at the origin and stays in R-. The partition functions solve the stochastic heat equation in full-space or half-space with mixed boundary condition at the origin; or equivalently the free energy satisfies the Kardar-Parisi-Zhang equation. We derive exact formulas for the Laplace transforms of the partition functions. In the full-space this is expressed as a Fredholm determinant while in the half-space this is expressed as a Fredholm Pfaffian. Taking long-time asymptotics we show that the limiting free energy fluctuations scale with exponent 1 / 3 and are given by the GUE and GSE Tracy-Widom distributions. These formulas come from summing divergent moment generating functions, hence are not mathematically justified. The primary purpose of this work is to present a mathematical perspective on the polymer replica method which is used to derive these results. In contrast to other replica method work, we do not appeal directly to the Bethe ansatz for the Lieb-Liniger model but rather utilize nested contour integral formulas for moments as well as their residue expansions.

  2. ANOPP/VMS HSCT ground contour system

    NASA Technical Reports Server (NTRS)

    Rawls, John, Jr.; Glaab, Lou

    1992-01-01

    This viewgraph shows the integration of the Visual Motion Simulator with ANOPP. ANOPP is an acronym for the Aircraft NOise Prediction Program. It is a computer code consisting of dedicated noise prediction modules for jet, propeller, and rotor powered aircraft along with flight support and noise propagation modules, all executed under the control of an executive system. The Visual Motion Simulator (VMS) is a ground based motion simulator with six degrees of freedom. The transport-type cockpit is equipped with conventional flight and engine-thrust controls and with flight instrument displays. Control forces on the wheel, column, and rudder pedals are provided by a hydraulic system coupled with an analog computer. The simulator provides variable-feel characteristics of stiffness, damping, coulomb friction, breakout forces, and inertia. The VMS provides a wide range of realistic flight trajectories necessary for computing accurate ground contours. The NASA VMS will be discussed in detail later in this presentation. An equally important part of the system for both ANOPP and VMS is the engine performance. This will also be discussed in the presentation.

  3. Understanding Physiological and Degenerative Natural Vision Mechanisms to Define Contrast and Contour Operators

    PubMed Central

    Demongeot, Jacques; Fouquet, Yannick; Tayyab, Muhammad; Vuillerme, Nicolas

    2009-01-01

    Background Dynamical systems like neural networks based on lateral inhibition have a large field of applications in image processing, robotics and morphogenesis modeling. In this paper, we will propose some examples of dynamical flows used in image contrasting and contouring. Methodology First we present the physiological basis of the retina function by showing the role of the lateral inhibition in the optical illusions and pathologic processes generation. Then, based on these biological considerations about the real vision mechanisms, we study an enhancement method for contrasting medical images, using either a discrete neural network approach, or its continuous version, i.e. a non-isotropic diffusion reaction partial differential system. Following this, we introduce other continuous operators based on similar biomimetic approaches: a chemotactic contrasting method, a viability contouring algorithm and an attentional focus operator. Then, we introduce the new notion of mixed potential Hamiltonian flows; we compare it with the watershed method and we use it for contouring. Conclusions We conclude by showing the utility of these biomimetic methods with some examples of application in medical imaging and computed assisted surgery. PMID:19547712

  4. Evaluation of Dosimetric Consequences of Seroma Contour Variability in Accelerated Partial Breast Irradiation Using a Constructed Representative Seroma Contour

    SciTech Connect

    Kosztyla, Robert; Olson, Robert; Carolan, Hannah; Balkwill, Susan; Moiseenko, Vitali; Kwan, Winkle

    2012-10-01

    Purpose: Contouring variability of the seroma can have important implications in the planning and delivery of accelerated partial breast irradiation (APBI). This study aimed to quantify the dosimetric impact of these interobserver and intraobserver contouring variations by construction of a representative seroma contour (RSC). Methods and Materials: Twenty-one patients with a seroma suitable for APBI underwent four computed tomography (CT) scans: one planning CT and three additional CTs on the first, third, and fifth days of treatment. Three radiation oncologists contoured the seroma on each CT scan. For 3 patients, oncologists repeated contouring twice to assess intraobserver variations. Seroma contour variability was quantified by construction of an RSC. In addition, the percent volume overlap (PVO) was calculated. Root-mean-square (RMS) differences in seroma volume, size, and center of mass position compared to those of the RSC were calculated. Treatment fields from the original plan were applied to the repeated CTs by using the same isocenter shifts as the original plan. The dosimetric impact of the contour variations was assessed using V{sub 95} (volume receiving at least 95% of the prescribed dose) and equivalent uniform dose (EUD). Results: Interobserver RMS volume differences were, on average, 5.6 times larger than intraobserver differences. The median interobserver RMS seroma volume difference was 1.48 cm{sup 3}. The median PVO was 51.6%. V{sub 95} and EUD of the seroma contours were similar for all patients. The median RMS differences of the seroma V{sub 95} and EUD were 0.01% (range, 0%-3.99%) and 0.05 Gy (range, 0-0.98 Gy). Conclusions: Construction of the RSC showed that interobserver variations were most responsible for contour variations of the seroma. Current planning margins provided adequate dose coverage of the seroma despite these contour variations.

  5. Eyeglasses lens contour extraction from facial images using an efficient shape description.

    PubMed

    Borza, Diana; Darabant, Adrian Sergiu; Danescu, Radu

    2013-01-01

    This paper presents a system that automatically extracts the position of the eyeglasses and the accurate shape and size of the frame lenses in facial images. The novelty brought by this paper consists in three key contributions. The first one is an original model for representing the shape of the eyeglasses lens, using Fourier descriptors. The second one is a method for generating the search space starting from a finite, relatively small number of representative lens shapes based on Fourier morphing. Finally, we propose an accurate lens contour extraction algorithm using a multi-stage Monte Carlo sampling technique. Multiple experiments demonstrate the effectiveness of our approach. PMID:24152926

  6. Eyeglasses Lens Contour Extraction from Facial Images Using an Efficient Shape Description

    PubMed Central

    Borza, Diana; Darabant, Adrian Sergiu; Danescu, Radu

    2013-01-01

    This paper presents a system that automatically extracts the position of the eyeglasses and the accurate shape and size of the frame lenses in facial images. The novelty brought by this paper consists in three key contributions. The first one is an original model for representing the shape of the eyeglasses lens, using Fourier descriptors. The second one is a method for generating the search space starting from a finite, relatively small number of representative lens shapes based on Fourier morphing. Finally, we propose an accurate lens contour extraction algorithm using a multi-stage Monte Carlo sampling technique. Multiple experiments demonstrate the effectiveness of our approach. PMID:24152926

  7. Automatic contour extraction for multiple objects based on Schroedinger transform of image

    NASA Astrophysics Data System (ADS)

    Lou, Liantang; Lu, Ling; Li, Liguo; Gao, Wenliang; Li, Lingling; Fu, Zhongliang

    2009-10-01

    Analytical and numerical solutions of the Schroedinger Equation which was satisfied by the propagator P(b, a) , including all the paths contribution, are discussed. The definition of Schrödinger transform of image is first proposed. Exterior and interior of objects are obtained from Schroedinger transforms of original image and its inverse image. Using the bruteforce algorithm, sets of exterior and interior points are thinned. By finding pairs of exterior and interior points with the smallest distance between them, contours of multiple objects are extracted. Some experiments with simulated and real images are given.

  8. Structural stereo matching of Laplacian-of-Gaussian contour segments for 3D perception

    NASA Technical Reports Server (NTRS)

    Boyer, K. L.; Sotak, G. E., Jr.

    1989-01-01

    The stereo correspondence problem is solved using Laplacian-of-Gaussian zero-crossing contours as a source of primitives for structural stereopsis, as opposed to traditional point-based algorithms. Up to 74 percent matching of candidate zero crossing points are being achieved on 240 x 246 images at small scales and large ranges of disparity, without coarse-to-fine tracking and without precise knowledge of the epipolar geometry. This approach should prove particularly useful in recovering the epipolar geometry automatically for stereo pairs for which it is unavailable a priori. Such situations occur in the extraction of terrain models from stereo aerial photographs.

  9. Common Visual Preference for Curved Contours in Humans and Great Apes

    PubMed Central

    2015-01-01

    Among the visual preferences that guide many everyday activities and decisions, from consumer choices to social judgment, preference for curved over sharp-angled contours is commonly thought to have played an adaptive role throughout human evolution, favoring the avoidance of potentially harmful objects. However, because nonhuman primates also exhibit preferences for certain visual qualities, it is conceivable that humans’ preference for curved contours is grounded on perceptual and cognitive mechanisms shared with extant nonhuman primate species. Here we aimed to determine whether nonhuman great apes and humans share a visual preference for curved over sharp-angled contours using a 2-alternative forced choice experimental paradigm under comparable conditions. Our results revealed that the human group and the great ape group indeed share a common preference for curved over sharp-angled contours, but that they differ in the manner and magnitude with which this preference is expressed behaviorally. These results suggest that humans’ visual preference for curved objects evolved from earlier primate species’ visual preferences, and that during this process it became stronger, but also more susceptible to the influence of higher cognitive processes and preference for other visual features. PMID:26558754

  10. Evaluation of deformable image registration for contour propagation between CT and cone-beam CT images in adaptive head and neck radiotherapy.

    PubMed

    Li, X; Zhang, Y Y; Shi, Y H; Zhou, L H; Zhen, X

    2016-04-29

    Deformable image registration (DIR) is a critical technic in adaptive radiotherapy (ART) to propagate contours between planning computerized tomography (CT) images and treatment CT/Cone-beam CT (CBCT) image to account for organ deformation for treatment re-planning. To validate the ability and accuracy of DIR algorithms in organ at risk (OAR) contours mapping, seven intensity-based DIR strategies are tested on the planning CT and weekly CBCT images from six Head & Neck cancer patients who underwent a 6 ∼ 7 weeks intensity-modulated radiation therapy (IMRT). Three similarity metrics, i.e. the Dice similarity coefficient (DSC), the percentage error (PE) and the Hausdorff distance (HD), are employed to measure the agreement between the propagated contours and the physician delineated ground truths. It is found that the performance of all the evaluated DIR algorithms declines as the treatment proceeds. No statistically significant performance difference is observed between different DIR algorithms (p> 0.05), except for the double force demons (DFD) which yields the worst result in terms of DSC and PE. For the metric HD, all the DIR algorithms behaved unsatisfactorily with no statistically significant performance difference (p= 0.273). These findings suggested that special care should be taken when utilizing the intensity-based DIR algorithms involved in this study to deform OAR contours between CT and CBCT, especially for those organs with low contrast. PMID:27259084

  11. Active vibration suppression of self-excited structures using an adaptive LMS algorithm

    NASA Astrophysics Data System (ADS)

    Danda Roy, Indranil

    The purpose of this investigation is to study the feasibility of an adaptive feedforward controller for active flutter suppression in representative linear wing models. The ability of the controller to suppress limit-cycle oscillations in wing models having root springs with freeplay nonlinearities has also been studied. For the purposes of numerical simulation, mathematical models of a rigid and a flexible wing structure have been developed. The rigid wing model is represented by a simple three-degree-of-freedom airfoil while the flexible wing is modelled by a multi-degree-of-freedom finite element representation with beam elements for bending and rod elements for torsion. Control action is provided by one or more flaps attached to the trailing edge and extending along the entire wing span for the rigid model and a fraction of the wing span for the flexible model. Both two-dimensional quasi-steady aerodynamics and time-domain unsteady aerodynamics have been used to generate the airforces in the wing models. An adaptive feedforward controller has been designed based on the filtered-X Least Mean Squares (LMS) algorithm. The control configuration for the rigid wing model is single-input single-output (SISO) while both SISO and multi-input multi-output (MIMO) configurations have been applied on the flexible wing model. The controller includes an on-line adaptive system identification scheme which provides the LMS controller with a reasonably accurate model of the plant. This enables the adaptive controller to track time-varying parameters in the plant and provide effective control. The wing models in closed-loop exhibit highly damped responses at airspeeds where the open-loop responses are destructive. Simulations with the rigid and the flexible wing models in a time-varying airstream show a 63% and 53% increase, respectively, over their corresponding open-loop flutter airspeeds. The ability of the LMS controller to suppress wing store flutter in the two models has

  12. Material properties from contours: New insights on object perception.

    PubMed

    Pinna, Baingio; Deiana, Katia

    2015-10-01

    In this work we explored phenomenologically the visual complexity of the material attributes on the basis of the contours that define the boundaries of a visual object. The starting point is the rich and pioneering work done by Gestalt psychologists and, more in detail, by Rubin, who first demonstrated that contours contain most of the information related to object perception, like the shape, the color and the depth. In fact, by investigating simple conditions like those used by Gestalt psychologists, mostly consisting of contours only, we demonstrated that the phenomenal complexity of the material attributes emerges through appropriate manipulation of the contours. A phenomenological approach, analogous to the one used by Gestalt psychologists, was used to answer the following questions. What are contours? Which attributes can be phenomenally defined by contours? Are material properties determined only by contours? What is the visual syntactic organization of object attributes? The results of this work support the idea of a visual syntactic organization as a new kind of object formation process useful to understand the language of vision that creates well-formed attribute organizations. The syntax of visual attributes can be considered as a new way to investigate the modular coding and, more generally, the binding among attributes, i.e., the issue of how the brain represents the pairing of shape and material properties. PMID:26072333

  13. Spatial profile of contours inducing long-range color assimilation

    PubMed Central

    DEVINCK, FRÉDÉRIC; SPILLMANN, LOTHAR; WERNER, JOHN S.

    2008-01-01

    Color induction was measured using a matching method for two spatial patterns, each composed of double contours. In one pattern (the standard), the contours had sharp edges to induce the Watercolor Effect (WCE); in the other, the two contours had a spatial taper so that the overall profile produced a sawtooth edge, or ramped stimulus. These patterns were chosen based on our previous study demonstrating that the strength of the chromatic WCE depends on a luminance difference between the two contours. Low-pass chromatic mechanisms, unlike bandpass luminance mechanisms, may be expected to be insensitive to the difference between the two spatial profiles. The strength of the watercolor spreading was similar for the two patterns at narrow widths of the contour possibly because of chromatic aberration, but with wider contours, the standard stimulus produced stronger assimilation than the ramped stimulus. This research suggests that luminance-dependent chromatic mechanisms mediate the WCE and that these mechanisms are sensitive to differences in the two spatial profiles of the pattern contours only when they are wide. PMID:16961998

  14. Spatial profile of contours inducing long-range color assimilation.

    PubMed

    Devinck, Frédéric; Spillmann, Lothar; Werner, John S

    2006-01-01

    Color induction was measured using a matching method for two spatial patterns, each composed of double contours. In one pattern (the standard), the contours had sharp edges to induce the Watercolor Effect (WCE); in the other, the two contours had a spatial taper so that the overall profile produced a sawtooth edge, or ramped stimulus. These patterns were chosen based on our previous study demonstrating that the strength of the chromatic WCE depends on a luminance difference between the two contours. Low-pass chromatic mechanisms, unlike bandpass luminance mechanisms, may be expected to be insensitive to the difference between the two spatial profiles. The strength of the watercolor spreading was similar for the two patterns at narrow widths of the contour possibly because of chromatic aberration, but with wider contours, the standard stimulus produced stronger assimilation than the ramped stimulus. This research suggests that luminance-dependent chromatic mechanisms mediate the WCE and that these mechanisms are sensitive to differences in the two spatial profiles of the pattern contours only when they are wide. PMID:16961998

  15. Evaluation of mandibular contour in patients with significant facial asymmetry.

    PubMed

    Fang, J-J; Tu, Y-H; Wong, T-Y; Liu, J-K; Zhang, Y-X; Leong, I-F; Chen, K-C

    2016-07-01

    Most previous studies on facial asymmetry have not specifically differentiated mandible deviation from structural asymmetry of the mandible. The purpose of this study was to assess the symmetry of the mandible by examining its contour in a cohort of patients with significant facial asymmetry. Eleven cases of facial asymmetry with chin deviation ≥10mm were enrolled. A voxel-paired median plane (optimal symmetry plane, OSP) and two landmark-based median planes were generated. The OSP was created by computing the best pairing of the bony voxels on the two sides. One side of the mandibular contour was mirrored onto the other side using the test plane. The contour differences were measured by distance and by area ratio. They were examined both in frontal and frontal downward inclined view. The contour symmetry of the mandible was that revealed by the plane that presented the best symmetry. The results showed that the OSP worked best in bisecting the contour into two symmetrical halves. Contour analysis showed relatively small discrepancies between the two sides. In conclusion, the mandibles retained an acceptable contour symmetry despite the presence of significant mandibular deviations. It is suggested that proper mandibular alignment be the primary objective in the correction of facial asymmetry. PMID:26976218

  16. Correction of EB-induced shrinkage in contour measurements

    NASA Astrophysics Data System (ADS)

    Ohashi, Takeyoshi; Hotta, Shoji; Yamaguchi, Atsuko; Tanaka, Junichi; Kawada, Hiroki

    2014-04-01

    We have proposed a new method for correcting electron beam (EB)-induced photoresist shrinkage in two-dimensional pattern contours extracted from a scanning electron microscope image. This method restores the original shrinkage-free contour from the experimentally determined "shrunk contour", based on a shrinkage model which takes into account of the elastic nature of the shrinkage phenomena caused by the photoresist-volume reduction. Verification of this shrinkage model was demonstrated by using ArF resist patterns as follows. First, the model was calibrated with the shrinkage data of several line patters with different linewidth prior to the contour correction. Next, the amount of shrinkage of elbow patterns was measured by comparing its contours obtained with small and sufficiently large EB dosages. It was found that the shrinkage of the inner edge of the elbow corner was smaller than that of the outer edge, which can be interpreted as a result of the elastic deformation. Finally, validity of shrinkage correction was examined. The model calculation correctly reproduced the observed shrinkage including its dependence on the location in the pattern. The restored contour showed a good consistency with the experimental results and the total root-mean-square error of the shrinkage correction was 0.5 nm. This result confirmed that our shrinkage model adequately describes the shrinkage of two dimensional patterns. Consequently, proposed shrinkage correction method is expected to improve the accuracy of contour measurements by a critical dimension-scanning electron microscope.

  17. The contour method: a new approach in experimental mechanics

    SciTech Connect

    Prime, Michael B

    2009-01-01

    The recently developed contour method can measure complex residual-stress maps in situations where other measurement methods cannot. This talk first describes the principle of the contour method. A part is cut in two using a precise and low-stress cutting technique such as electric discharge machining. The contour of the resulting new surface, which will not be flat if residual stresses are relaxed by the cutting, is then measured. Finally, a conceptually simple finite element analysis determines the original residual stresses from the measured contour. Next, this talk gives several examples of applications. The method is validated by comparing with neutron diffraction measurements in an indented steel disk and in a friction stir weld between dissimilar aluminum alloys. Several applications are shown that demonstrate the power of the contour method: large aluminum forgings, railroad rails, and welds. Finally, this talk discusses why the contour method is significant departure from conventional experimental mechanics. Other relaxation method, for example hole-drilling, can only measure a 1-D profile of residual stresses, and yet they require a complicated inverse calculation to determine the stresses from the strain data. The contour method gives a 2-D stress map over a full cross-section, yet a direct calculation is all that is needed to reduce the data. The reason for these advantages lies in a subtle but fundamental departure from conventional experimental mechanics. Applying new technology to old methods like will not give similar advances, but the new approach also introduces new errors.

  18. The Influence of Contour on Similarity Perception of Star Glyphs.

    PubMed

    Fuchs, Johannes; Isenberg, Petra; Bezerianos, Anastasia; Fischer, Fabian; Bertini, Enrico

    2014-12-01

    We conducted three experiments to investigate the effects of contours on the detection of data similarity with star glyph variations. A star glyph is a small, compact, data graphic that represents a multi-dimensional data point. Star glyphs are often used in small-multiple settings, to represent data points in tables, on maps, or as overlays on other types of data graphics. In these settings, an important task is the visual comparison of the data points encoded in the star glyph, for example to find other similar data points or outliers. We hypothesized that for data comparisons, the overall shape of a star glyph--enhanced through contour lines--would aid the viewer in making accurate similarity judgments. To test this hypothesis, we conducted three experiments. In our first experiment, we explored how the use of contours influenced how visualization experts and trained novices chose glyphs with similar data values. Our results showed that glyphs without contours make the detection of data similarity easier. Given these results, we conducted a second study to understand intuitive notions of similarity. Star glyphs without contours most intuitively supported the detection of data similarity. In a third experiment, we tested the effect of star glyph reference structures (i.e., tickmarks and gridlines) on the detection of similarity. Surprisingly, our results show that adding reference structures does improve the correctness of similarity judgments for star glyphs with contours, but not for the standard star glyph. As a result of these experiments, we conclude that the simple star glyph without contours performs best under several criteria, reinforcing its practice and popularity in the literature. Contours seem to enhance the detection of other types of similarity, e. g., shape similarity and are distracting when data similarity has to be judged. Based on these findings we provide design considerations regarding the use of contours and reference structures on star

  19. An Efficient Correction Algorithm for Eliminating Image Misalignment Effects on Co-Phasing Measurement Accuracy for Segmented Active Optics Systems

    PubMed Central

    Yue, Dan; Xu, Shuyan; Nie, Haitao; Wang, Zongyang

    2016-01-01

    The misalignment between recorded in-focus and out-of-focus images using the Phase Diversity (PD) algorithm leads to a dramatic decline in wavefront detection accuracy and image recovery quality for segmented active optics systems. This paper demonstrates the theoretical relationship between the image misalignment and tip-tilt terms in Zernike polynomials of the wavefront phase for the first time, and an efficient two-step alignment correction algorithm is proposed to eliminate these misalignment effects. This algorithm processes a spatial 2-D cross-correlation of the misaligned images, revising the offset to 1 or 2 pixels and narrowing the search range for alignment. Then, it eliminates the need for subpixel fine alignment to achieve adaptive correction by adding additional tip-tilt terms to the Optical Transfer Function (OTF) of the out-of-focus channel. The experimental results demonstrate the feasibility and validity of the proposed correction algorithm to improve the measurement accuracy during the co-phasing of segmented mirrors. With this alignment correction, the reconstructed wavefront is more accurate, and the recovered image is of higher quality. PMID:26934045

  20. Automated contour mapping using sparse volume sampling for 4D radiation therapy

    SciTech Connect

    Chao Ming; Schreibmann, Eduard; Li Tianfang; Wink, Nicole; Xing Lei

    2007-10-15

    The purpose of this work is to develop a novel strategy to automatically map organ contours from one phase of respiration to all other phases on a four-dimensional computed tomography (4D CT). A region of interest (ROI) was manually delineated by a physician on one phase specific image set of a 4D CT. A number of cubic control volumes of the size of {approx}1 cm were automatically placed along the contours. The control volumes were then collectively mapped to the next phase using a rigid transformation. To accommodate organ deformation, a model-based adaptation of the control volume positions was followed after the rigid mapping procedure. This further adjustment of control volume positions was performed by minimizing an energy function which balances the tendency for the control volumes to move to their correspondences with the desire to maintain similar image features and shape integrity of the contour. The mapped ROI surface was then constructed based on the central positions of the control volumes using a triangulated surface construction technique. The proposed technique was assessed using a digital phantom and 4D CT images of three lung patients. Our digital phantom study data indicated that a spatial accuracy better than 2.5 mm is achievable using the proposed technique. The patient study showed a similar level of accuracy. In addition, the computational speed of our algorithm was significantly improved as compared with a conventional deformable registration-based contour mapping technique. The robustness and accuracy of this approach make it a valuable tool for the efficient use of the available spatial-tempo information for 4D simulation and treatment.

  1. Risk of Thromboembolism Following Body-Contouring Surgery After Massive Weight Loss

    PubMed Central

    Griffin, M.; Akhavani, M. A.; Muirhead, N.; Fleming, A. N. M.

    2015-01-01

    Background: “Postbariatric” patients are at significant risk for increased postoperative complications. This study aimed to define the risk of venous thromboembolism following body-contouring surgery after massive weight loss. Methods: A retrospective analysis was performed on all patients who had undergone all forms of body-contouring procedures after massive weight loss between January 2005 and August 2012 at St George's Hospital, South West London, United Kingdom. Data were collected on patient demographics, comorbidities, risks factors for thromboembolism, preoperative and postoperative body mass index, and type of surgery. Results: A total of 135 operations were performed on 53 patients (43 females, 10 male), with an average age of 44.8 years (range, 26–56 years). Most had staged procedures including 55 abdominoplasties, 23 brachioplasties, 31 thigh lifts, 14 lower-body lifts, and 12 mastopexies. All patients received venous thromboembolism prophylaxis postoperatively including low-molecular-weight heparin (dalteparin) within an average of 22.5 hours after surgery and the application of intraoperative graduated compression stockings. Patients received dalteparin for an average of 4 days (range, 2–14 days), which correlated to their length of stay. One patient had a deep venous thrombosis 14 days postoperatively and then 2 days later developed a nonfatal pulmonary embolus, giving a venous thromboembolism prevalence of 0.74% (1/135). Conclusions: The clinically apparent venous thromboembolism prevalence was low among patients undergoing body-contouring procedures after massive weight loss in this study. We provide evidence of a successful algorithm to prevent venous thromboembolism for patients undergoing body-contouring procedures after massive weight loss. PMID:26171089

  2. Scheduling language and algorithm development study. Appendix: Study approach and activity summary

    NASA Technical Reports Server (NTRS)

    1974-01-01

    The approach and organization of the study to develop a high level computer programming language and a program library are presented. The algorithm and problem modeling analyses are summarized. The approach used to identify and specify the capabilities required in the basic language is described. Results of the analyses used to define specifications for the scheduling module library are presented.

  3. Genetic algorithms approach for the extraction of the polygonal approximation of planar objects

    NASA Astrophysics Data System (ADS)

    Erives, Hector; Parra-Loera, Ramon

    1996-06-01

    A new approach to the extraction of the polygonal approximation is presented. The method obtains a smaller set of the important features by means of an evolutionary algorithm. A genetic approach with some heuristics, improves contour approximation search by starting with a parallel search at various points in the contour. The algorithm uses genetic algorithms to encode a polygonal approximation as a chromosome and evolve it to provide a polygonal approximation. Experimental results are provided.

  4. A closed-form solution for noise contours

    NASA Technical Reports Server (NTRS)

    Stewart, E. C.; Carson, T. M.

    1979-01-01

    An analytical approach for generating noise contours that overcome the difficulties of existing programs is described. This approach is valid for arbitrarily complex paths and reveals the importance of various factors that influence contour shape and size. The calculations are simple enough to be implemented on a small, hand-held programmable calculator, and a program for the HP-67 calculator is illustrated. The method is fast, simple, and gives the area, the contour, and its extremities for arbitrary flight paths for both takeoffs and landings.

  5. Surface Boundary Contour Strengthens Image Dominance in Binocular Competition

    PubMed Central

    Xu, Jingping P

    2009-01-01

    We used a binocular rivalry stimulus with one half-image having a vertical grating disc surrounded by horizontal grating, and the other half-image having a horizontal grating disc with a variable spatial phase relative to the surrounding horizontal grating. We found that increasing the phase-shift of the horizontal grating disc, which strengthens the boundary contour, progressively increases its predominance. But the predominance is little affected when a constant gray ring (boundary contour) is added onto the rim of the incrementally phase-shifted horizontal grating. This suggests the influence of boundary contour supersede that of the center-surround-interaction caused by the phase-shift. PMID:19913047

  6. Synthetic Molecular Machines for Active Self-Assembly: Prototype Algorithms, Designs, and Experimental Study

    NASA Astrophysics Data System (ADS)

    Dabby, Nadine L.

    Computer science and electrical engineering have been the great success story of the twentieth century. The neat modularity and mapping of a language onto circuits has led to robots on Mars, desktop computers and smartphones. But these devices are not yet able to do some of the things that life takes for granted: repair a scratch, reproduce, regenerate, or grow exponentially fast--all while remaining functional. This thesis explores and develops algorithms, molecular implementations, and theoretical proofs in the context of "active self-assembly" of molecular systems. The long-term vision of active self-assembly is the theoretical and physical implementation of materials that are composed of reconfigurable units with the programmability and adaptability of biology's numerous molecular machines. En route to this goal, we must first find a way to overcome the memory limitations of molecular systems, and to discover the limits of complexity that can be achieved with individual molecules. One of the main thrusts in molecular programming is to use computer science as a tool for figuring out what can be achieved. While molecular systems that are Turing-complete have been demonstrated [Winfree, 1996], these systems still cannot achieve some of the feats biology has achieved. One might think that because a system is Turing-complete, capable of computing "anything," that it can do any arbitrary task. But while it can simulate any digital computational problem, there are many behaviors that are not "computations" in a classical sense, and cannot be directly implemented. Examples include exponential growth and molecular motion relative to a surface. Passive self-assembly systems cannot implement these behaviors because (a) molecular motion relative to a surface requires a source of fuel that is external to the system, and (b) passive systems are too slow to assemble exponentially-fast-growing structures. We call these behaviors "energetically incomplete" programmable

  7. Details of Side Load Test Data and Analysis for a Truncated Ideal Contour Nozzle and a Parabolic Contour Nozzle

    NASA Technical Reports Server (NTRS)

    Ruf, Joseph H.; McDaniels, David M.; Brown, Andrew M.

    2010-01-01

    Two cold flow subscale nozzles were tested for side load characteristics during simulated nozzle start transients. The two test article contours were a truncated ideal and a parabolic. The current paper is an extension of a 2009 AIAA JPC paper on the test results for the same two nozzle test articles. The side load moments were measured with the strain tube approach in MSFC s Nozzle Test Facility. The processing techniques implemented to convert the strain gage signals into side load moment data are explained. Nozzle wall pressure profiles for separated nozzle flow at many NPRs are presented and discussed in detail. The effect of the test cell diffuser inlet on the parabolic nozzle s wall pressure profiles for separated flow is shown. The maximum measured side load moments for the two contours are compared. The truncated ideal contour s peak side load moment was 45% of that of the parabolic contour. The calculated side load moments, via mean-plus-three-standard-deviations at each nozzle pressure ratio, reproduced the characteristics and absolute values of measured maximums for both contours. The effect of facility vibration on the measured side load moments is quantified and the effect on uncertainty is calculated. The nozzle contour designs are discussed and the impact of a minor fabrication flaw in the nozzle contours is explained.

  8. Deformable image registration based automatic CT-to-CT contour propagation for head and neck adaptive radiotherapy in the routine clinical setting

    SciTech Connect

    Kumarasiri, Akila Siddiqui, Farzan; Liu, Chang; Yechieli, Raphael; Shah, Mira; Pradhan, Deepak; Zhong, Hualiang; Chetty, Indrin J.; Kim, Jinkoo

    2014-12-15

    Purpose: To evaluate the clinical potential of deformable image registration (DIR)-based automatic propagation of physician-drawn contours from a planning CT to midtreatment CT images for head and neck (H and N) adaptive radiotherapy. Methods: Ten H and N patients, each with a planning CT (CT1) and a subsequent CT (CT2) taken approximately 3–4 week into treatment, were considered retrospectively. Clinically relevant organs and targets were manually delineated by a radiation oncologist on both sets of images. Four commercial DIR algorithms, two B-spline-based and two Demons-based, were used to deform CT1 and the relevant contour sets onto corresponding CT2 images. Agreement of the propagated contours with manually drawn contours on CT2 was visually rated by four radiation oncologists in a scale from 1 to 5, the volume overlap was quantified using Dice coefficients, and a distance analysis was done using center of mass (CoM) displacements and Hausdorff distances (HDs). Performance of these four commercial algorithms was validated using a parameter-optimized Elastix DIR algorithm. Results: All algorithms attained Dice coefficients of >0.85 for organs with clear boundaries and those with volumes >9 cm{sup 3}. Organs with volumes <3 cm{sup 3} and/or those with poorly defined boundaries showed Dice coefficients of ∼0.5–0.6. For the propagation of small organs (<3 cm{sup 3}), the B-spline-based algorithms showed higher mean Dice values (Dice = 0.60) than the Demons-based algorithms (Dice = 0.54). For the gross and planning target volumes, the respective mean Dice coefficients were 0.8 and 0.9. There was no statistically significant difference in the Dice coefficients, CoM, or HD among investigated DIR algorithms. The mean radiation oncologist visual scores of the four algorithms ranged from 3.2 to 3.8, which indicated that the quality of transferred contours was “clinically acceptable with minor modification or major modification in a small number of contours

  9. Shaping of the continental rise by deep geostrophic contour currents.

    PubMed

    Heezen, B C; Hollister, C D; Ruddiman, W F

    1966-04-22

    Geostrophic contour-following bottom currents involved in the deep thermohaline circulation of the world ocean appear to be the principal agents which control the shape of the continental rise and other sediment bodies. PMID:17815077

  10. Simple method for prediction of aircraft noise contours

    NASA Technical Reports Server (NTRS)

    Stewart, E. C.; Carson, T. M.

    1980-01-01

    A method for generating noise contours more rapidly and more simply than previously used programs is discussed. The method gives the area, the noise contour, and its extremities for an arbitrarily complex flight path for both takeoffs and landings with relative ease. The analysis reveals the fundamental nature of the contours and how the various factors that influence its size and shape enter into the analysis. It is noted that the effects of ground attenuation and shielding are omitted as they are important only on the initial portion of flight and are highly dependent upon aircraft configuration. However, the analysis shows that these effects could be included. It is emphasized the the single-event contour is an obvious choice for purposes of minimizing noise impact.

  11. Active suppression of nonlinear composite beam vibrations by selected control algorithms

    NASA Astrophysics Data System (ADS)

    Warminski, Jerzy; Bochenski, Marcin; Jarzyna, Wojciech; Filipek, Piotr; Augustyniak, Michal

    2011-05-01

    This paper is focused on application of different control algorithms for a flexible, geometrically nonlinear beam-like structure with Macro Fiber Composite (MFC) actuator. Based on the mathematical model of a geometrically nonlinear beam, analytical solutions for Nonlinear Saturation Controller (NSC) are obtained using Multiple Scale Method. Effectiveness of different control strategies is evaluated by numerical simulations in Matlab-Simulink software. Then, the Digital Signal Processing (DSP) controller and selected control algorithms are implemented to the physical system to compare numerical and experimental results. Detailed analysis for the NSC system is carried out, especially for high level of amplitude and wide range of frequencies of excitation. Finally, the efficiency of the considered controllers is tested experimentally for a more complex autoparametric " L-shape" beam system.

  12. Re-Dimensional Thinking in Earth Science: From 3-D Virtual Reality Panoramas to 2-D Contour Maps

    ERIC Educational Resources Information Center

    Park, John; Carter, Glenda; Butler, Susan; Slykhuis, David; Reid-Griffin, Angelia

    2008-01-01

    This study examines the relationship of gender and spatial perception on student interactivity with contour maps and non-immersive virtual reality. Eighteen eighth-grade students elected to participate in a six-week activity-based course called "3-D GeoMapping." The course included nine days of activities related to topographic mapping. At the end…

  13. A simple but efficient voice activity detection algorithm through Hilbert transform and dynamic threshold for speech pathologies

    NASA Astrophysics Data System (ADS)

    Ortiz P., D.; Villa, Luisa F.; Salazar, Carlos; Quintero, O. L.

    2016-04-01

    A simple but efficient voice activity detector based on the Hilbert transform and a dynamic threshold is presented to be used on the pre-processing of audio signals. The algorithm to define the dynamic threshold is a modification of a convex combination found in literature. This scheme allows the detection of prosodic and silence segments on a speech in presence of non-ideal conditions like a spectral overlapped noise. The present work shows preliminary results over a database built with some political speech. The tests were performed adding artificial noise to natural noises over the audio signals, and some algorithms are compared. Results will be extrapolated to the field of adaptive filtering on monophonic signals and the analysis of speech pathologies on futures works.

  14. An image compression survey and algorithm switching based on scene activity

    NASA Technical Reports Server (NTRS)

    Hart, M. M.

    1985-01-01

    Data compression techniques are presented. A description of these techniques is provided along with a performance evaluation. The complexity of the hardware resulting from their implementation is also addressed. The compression effect on channel distortion and the applicability of these algorithms to real-time processing are presented. Also included is a proposed new direction for an adaptive compression technique for real-time processing.

  15. Level set algorithms comparison for multi-slice CT left ventricle segmentation

    NASA Astrophysics Data System (ADS)

    Medina, Ruben; La Cruz, Alexandra; Ordoñes, Andrés.; Pesántez, Daniel; Morocho, Villie; Vanegas, Pablo

    2015-12-01

    The comparison of several Level Set algorithms is performed with respect to 2D left ventricle segmentation in Multi-Slice CT images. Five algorithms are compared by calculating the Dice coefficient between the resulting segmentation contour and a reference contour traced by a cardiologist. The algorithms are also tested on images contaminated with Gaussian noise for several values of PSNR. Additionally an algorithm for providing the initialization shape is proposed. This algorithm is based on a combination of mathematical morphology tools with watershed and region growing algorithms. Results on the set of test images are promising and suggest the extension to 3{D MSCT database segmentation.

  16. Projection lithography with distortion compensation using reticle chuck contouring

    DOEpatents

    Tichenor, Daniel A.

    2001-01-01

    A chuck for holding a reflective reticle where the chuck has an insulator block with a non-planer surface contoured to cause distortion correction of EUV radiation is provided. Upon being placed on the chuck, a thin, pliable reflective reticle will conform to the contour of the chuck's non-planer surface. When employed in a scanning photolithography system, distortion in the scanned direction is corrected.

  17. Contour-map encoding of shape for early vision

    NASA Technical Reports Server (NTRS)

    Kanerva, Pentti

    1990-01-01

    Contour maps provide a general method for recognizing 2-D shapes. All but blank images give rise to such maps, and people are good at recognizing objects and shapes from them. The maps are encoded easily in long feature vectors that are suitable for recognition by an associative memory. These properties of contour maps suggest a role for them in early visual perception. The prevalence of direction sensitive neurons in the visual cortex of mammals supports this view.

  18. An Unusual Application of NASTRAN Contour Plotting Capability

    NASA Technical Reports Server (NTRS)

    Mittal, S.; Gallo, M.; Wang, T.

    1985-01-01

    A procedure is presented for obtaining contour plots of any physical quantity defined on a number of points of the surface of a structure. Rigid Format 1 of HEAT approach in Cosmic NASTRAN is ALTERED to enable use of contour plotting capability for scalar quantities. The ALTERED DMAP sequence is given. Examples include temperature distribution on the face of a cooled laser mirror and the angle of incidence or a radome surface.

  19. Reliability and accuracy of an automated tracking algorithm to measure controlled passive and active muscle fascicle length changes from ultrasound.

    PubMed

    Gillett, Jarred G; Barrett, Rod S; Lichtwark, Glen A

    2013-01-01

    Manual tracking of muscle fascicle length changes from ultrasound images is a subjective and time-consuming process. The purpose of this study was to assess the repeatability and accuracy of an automated algorithm for tracking fascicle length changes in the medial gastrocnemius (MG) muscle during passive length changes and active contractions (isometric, concentric and eccentric) performed on a dynamometer. The freely available, automated tracking algorithm was based on the Lucas-Kanade optical flow algorithm with an affine optic flow extension, which accounts for image translation, dilation, rotation and shear between consecutive frames of an image sequence. Automated tracking was performed by three experienced assessors, and within- and between-examiner repeatability was computed using the coefficient of multiple determination (CMD). Fascicle tracking data were also compared with manual digitisation of the same image sequences, and the level of agreement between the two methods was calculated using the coefficient of multiple correlation (CMC). The CMDs across all test conditions ranged from 0.50 to 0.93 and were all above 0.98 when recomputed after the systematic error due to the estimate of the initial fascicle length on the first ultrasound frame was removed from the individual fascicle length waveforms. The automated and manual tracking approaches produced similar fascicle length waveforms, with an overall CMC of 0.88, which improved to 0.94 when the initial length offset was removed. Overall results indicate that the automated fascicle tracking algorithm was a repeatable, accurate and time-efficient method for estimating fascicle length changes of the MG muscle in controlled passive and active conditions. PMID:22235878

  20. Algorithm development

    NASA Technical Reports Server (NTRS)

    Barth, Timothy J.; Lomax, Harvard

    1987-01-01

    The past decade has seen considerable activity in algorithm development for the Navier-Stokes equations. This has resulted in a wide variety of useful new techniques. Some examples for the numerical solution of the Navier-Stokes equations are presented, divided into two parts. One is devoted to the incompressible Navier-Stokes equations, and the other to the compressible form.

  1. Object detection approach using generative sparse, hierarchical networks with top-down and lateral connections for combining texture/color detection and shape/contour detection

    SciTech Connect

    Paiton, Dylan M.; Kenyon, Garrett T.; Brumby, Steven P.; Schultz, Peter F.; George, John S.

    2015-07-28

    An approach to detecting objects in an image dataset may combine texture/color detection, shape/contour detection, and/or motion detection using sparse, generative, hierarchical models with lateral and top-down connections. A first independent representation of objects in an image dataset may be produced using a color/texture detection algorithm. A second independent representation of objects in the image dataset may be produced using a shape/contour detection algorithm. A third independent representation of objects in the image dataset may be produced using a motion detection algorithm. The first, second, and third independent representations may then be combined into a single coherent output using a combinatorial algorithm.

  2. Interslice interpolation of anisotropic 3D images using multiresolution contour correlation

    NASA Astrophysics Data System (ADS)

    Lee, Jiann-Der; Wan, Shu-Yen; Ma, Cherng-Min

    2002-05-01

    To visualize, manipulate and analyze the geometrical structure of anatomical changes, it is often required to perform three-dimensional (3-D) interpolation of the interested organ shape from a series of cross-sectional images obtained from various imaging modalities, such as ultrasound, computed tomography (CT), magnetic resonance imaging (MRI), etc. In this paper, a novel wavelet-based interpolation scheme, which consists of four algorithms are proposed to 3-D image reconstruction. The multi-resolution characteristics of wavelet transform (WT) is completely used in this approach, which consists of two stages, boundary extraction and contour interpolation. More specifically, a wavelet-based radial search method is first designed to extract the boundary of the target object. Next, the global information of the extracted boundary is analyzed for interpolation using WT with various bases and scales. By using six performance measures to evaluate the effectiveness of the proposed scheme, experimental results show that the performance of all proposed algorithms is superior to traditional contour-based methods, linear interpolation and B-spline interpolation. The satisfactory outcome of the proposed scheme provides its capability for serving as an essential part of image processing system developed for medical applications.

  3. A possible analogy between contours in mathematics--as exemplified by Cauchy's integral formula--and contours in the arts.

    PubMed

    Gerr, S

    1982-01-01

    An attempt is made to draw an analogy between contour drawing and a particular mathematical theorem. The analogy is seen to depend on the fact that both methods use definite values along a contour to imply a totality of values within the contour; thus, the use of a part to suggest the whole, by way of a hypothetical 'gestalt-like integration' in the case of the art contour, and the usual process of mathematical integration in the case of Cauchy's formula. Examples illustrating the analogy are drawn from a wide range of artistic work: a modern American drawing, a Cro-Magnon cave painting, and two Chinese works. The traditional Chinese philosophy of painting is invoked in support of the analogy because of its explicit emphasis on the primacy of outline drawing in Chinese painting. Some speculations are offered on further development and application of the analogy. PMID:7182805

  4. Investigating Baseline, Alternative and Copula-based Algorithm for combining Airborne Active and Passive Microwave Observations in the SMAP Context

    NASA Astrophysics Data System (ADS)

    Montzka, C.; Lorenz, C.; Jagdhuber, T.; Laux, P.; Hajnsek, I.; Kunstmann, H.; Entekhabi, D.; Vereecken, H.

    2015-12-01

    The objective of the NASA Soil Moisture Active & Passive (SMAP) mission is to provide global measurements of soil moisture and freeze/thaw states. SMAP integrates L-band radar and radiometer instruments as a single observation system combining the respective strengths of active and passive remote sensing for enhanced soil moisture mapping. Airborne instruments will be a key part of the SMAP validation program. Here, we present an airborne campaign in the Rur catchment, Germany, in which the passive L-band system Polarimetric L-band Multi-beam Radiometer (PLMR2) and the active L-band system F-SAR of DLR were flown simultaneously on the same platform on six dates in 2013. The flights covered the full heterogeneity of the area under investigation, i.e. all types of land cover and experimental monitoring sites with in situ sensors. Here, we used the obtained data sets as a test-bed for the analysis of three active-passive fusion techniques: A) The SMAP baseline algorithm: Disaggregation of passive microwave brightness temperature by active microwave backscatter and subsequent inversion to soil moisture, B), the SMAP alternative algorithm: Estimation of soil moisture by passive sensor data and subsequent disaggregation by active sensor backscatter and C) Copula-based combination of active and passive microwave data. For method C empirical Copulas were generated and theoretical Copulas fitted both on the level of the raw products brightness temperature and backscatter as well as two soil moisture products. Results indicate that the regression parameters for method A and B are dependent on the radar vegetation index (RVI). Similarly, for method C the best performance was gained by generating separate Copulas for individual land use classes. For more in-depth analyses longer time series are necessary as can obtained by airborne campaigns, therefore, the methods will be applied to SMAP data.

  5. A path towards uncertainty assignment in an operational cloud-phase algorithm from ARM vertically pointing active sensors

    DOE PAGESBeta

    Riihimaki, Laura D.; Comstock, Jennifer M.; Anderson, Kevin K.; Holmes, Aimee; Luke, Edward

    2016-06-10

    Knowledge of cloud phase (liquid, ice, mixed, etc.) is necessary to describe the radiative impact of clouds and their lifetimes, but is a property that is difficult to simulate correctly in climate models. One step towards improving those simulations is to make observations of cloud phase with sufficient accuracy to help constrain model representations of cloud processes. In this study, we outline a methodology using a basic Bayesian classifier to estimate the probabilities of cloud-phase class from Atmospheric Radiation Measurement (ARM) vertically pointing active remote sensors. The advantage of this method over previous ones is that it provides uncertainty informationmore » on the phase classification. We also test the value of including higher moments of the cloud radar Doppler spectrum than are traditionally used operationally. Using training data of known phase from the Mixed-Phase Arctic Cloud Experiment (M-PACE) field campaign, we demonstrate a proof of concept for how the method can be used to train an algorithm that identifies ice, liquid, mixed phase, and snow. Over 95 % of data are identified correctly for pure ice and liquid cases used in this study. Mixed-phase and snow cases are more problematic to identify correctly. When lidar data are not available, including additional information from the Doppler spectrum provides substantial improvement to the algorithm. This is a first step towards an operational algorithm and can be expanded to include additional categories such as drizzle with additional training data.« less

  6. A path towards uncertainty assignment in an operational cloud-phase algorithm from ARM vertically pointing active sensors

    NASA Astrophysics Data System (ADS)

    Riihimaki, Laura D.; Comstock, Jennifer M.; Anderson, Kevin K.; Holmes, Aimee; Luke, Edward

    2016-06-01

    Knowledge of cloud phase (liquid, ice, mixed, etc.) is necessary to describe the radiative impact of clouds and their lifetimes, but is a property that is difficult to simulate correctly in climate models. One step towards improving those simulations is to make observations of cloud phase with sufficient accuracy to help constrain model representations of cloud processes. In this study, we outline a methodology using a basic Bayesian classifier to estimate the probabilities of cloud-phase class from Atmospheric Radiation Measurement (ARM) vertically pointing active remote sensors. The advantage of this method over previous ones is that it provides uncertainty information on the phase classification. We also test the value of including higher moments of the cloud radar Doppler spectrum than are traditionally used operationally. Using training data of known phase from the Mixed-Phase Arctic Cloud Experiment (M-PACE) field campaign, we demonstrate a proof of concept for how the method can be used to train an algorithm that identifies ice, liquid, mixed phase, and snow. Over 95 % of data are identified correctly for pure ice and liquid cases used in this study. Mixed-phase and snow cases are more problematic to identify correctly. When lidar data are not available, including additional information from the Doppler spectrum provides substantial improvement to the algorithm. This is a first step towards an operational algorithm and can be expanded to include additional categories such as drizzle with additional training data.

  7. Spectral sensitivities for illusory contour perception: a manifold linkage of chromatic and achromatic cues with the generation of contours.

    PubMed

    Takahashi, S; Kaihara, T; Takemoto, A; Ido, K; Ejima, Y

    1992-09-01

    Using colored inducing patterns presented as increments upon a white uniform background, the increment thresholds needed for illusory contour perception were measured as a function of the wavelength of inducing pattern. The spectral sensitivity functions were obtained with varying adaptation level and stimulus configuration, high and low background illumination, and line-based and figure-based inducing patterns. The results showed a distinctive feature between the line-based and the figure-based illusory contours. The sensitivity functions for the line-based illusory contours showed the characteristics of non-opponent mechanisms and they were shape invariant with background intensity and spatial variables. On the other hand, the sensitivity functions for the figure-based illusory contours showed non-opponent nature for low background illumination but opponent nature for high background illumination. It is suggested that the generation of illusory contours involves concurrent processing of different cues of luminance and color, and that photopic adaptation level and stimulus configuration control the degree of the contributions of chromatic and achromatic mechanisms to contour formation. PMID:1455742

  8. [I have tested for you. The contour tonometer. IOP analysis using "Dynamic Contour Tonometry"].

    PubMed

    Lachkar, Y

    2006-05-01

    The Pascal tonometer, or the Dynamic Contour Tonometer (DCT) (Swiss Microtechnology, Zurich) is a device that differs from the Goldmann applanation tonometer (GAT) in its IOP sensor at the center of the cone that measures pressure by a means less dependent on corneal structure. The efficacy of this device in measuring IOP after LASIK surgery has been demonstrated. It can be used to obtain more precise IOP measurements in glaucoma patients or ocular hypertension in cases where the measurement is debatable because of a very thin or very thick cornea. We studied the relations between the measurements with the two devices on thin, normal, and thick corneas. The Pascal tonometer generally showed a good correlation with the Goldmann applanation tonometer, but the limits of agreement are wide. For thin corneas, this device seems more reliable than the GAT, but for thick corneas, no difference was found between the two methods. PMID:17072219

  9. Optimal placement of active braces by using PSO algorithm in near- and far-field earthquakes

    NASA Astrophysics Data System (ADS)

    Mastali, M.; Kheyroddin, A.; Samali, B.; Vahdani, R.

    2016-03-01

    One of the most important issues in tall buildings is lateral resistance of the load-bearing systems against applied loads such as earthquake, wind and blast. Dual systems comprising core wall systems (single or multi-cell core) and moment-resisting frames are used as resistance systems in tall buildings. In addition to adequate stiffness provided by the dual system, most tall buildings may have to rely on various control systems to reduce the level of unwanted motions stemming from severe dynamic loads. One of the main challenges to effectively control the motion of a structure is limitation in distributing the required control along the structure height optimally. In this paper, concrete shear walls are used as secondary resistance system at three different heights as well as actuators installed in the braces. The optimal actuator positions are found by using optimized PSO algorithm as well as arbitrarily. The control performance of buildings that are equipped and controlled using the PSO algorithm method placement is assessed and compared with arbitrary placement of controllers using both near- and far-field ground motions of Kobe and Chi-Chi earthquakes.

  10. Validation of Algorithms for Basal Insulin Rate Reductions in Type 1 Diabetic Patients Practising Physical Activity

    ClinicalTrials.gov

    2013-04-19

    Type 1 Diabetes With a Subcutaneous Insulin Pump; Adjustment of the Recommended Basal Insulin Flow Rate in the Event of Physical Activity; Adjustment of the Recommended Prandial Insulin in the Event of Physical Activity

  11. Automatic ultrasonic breast lesions detection using support vector machine based algorithm

    NASA Astrophysics Data System (ADS)

    Yeh, Chih-Kuang; Miao, Shan-Jung; Fan, Wei-Che; Chen, Yung-Sheng

    2007-03-01

    evaluate the performance of our approach. Several types of cysts with different contours and contrast resolutions images were simulated with speckle characteristics. Four thousand sub-images of tumor objects and speckle-noised background were used for SVM training. Comparison with conventional algorithms such as active contouring, the proposed algorithm does not need to position any initial seed point within the lesion and is able to detect simultaneously multiple irregular shape lesions in a single image, thus it can be regarded as a fully automatic process. The results show that the mean normalized true positive area overlap between true contour and contour obtained by the proposed approach is 90%.

  12. Use of an Improved Matching Algorithm to Select Scaffolds for Enzyme Design Based on a Complex Active Site Model.

    PubMed

    Huang, Xiaoqiang; Xue, Jing; Lin, Min; Zhu, Yushan

    2016-01-01

    Active site preorganization helps native enzymes electrostatically stabilize the transition state better than the ground state for their primary substrates and achieve significant rate enhancement. In this report, we hypothesize that a complex active site model for active site preorganization modeling should help to create preorganized active site design and afford higher starting activities towards target reactions. Our matching algorithm ProdaMatch was improved by invoking effective pruning strategies and the native active sites for ten scaffolds in a benchmark test set were reproduced. The root-mean squared deviations between the matched transition states and those in the crystal structures were < 1.0 Å for the ten scaffolds, and the repacking calculation results showed that 91% of the hydrogen bonds within the active sites are recovered, indicating that the active sites can be preorganized based on the predicted positions of transition states. The application of the complex active site model for de novo enzyme design was evaluated by scaffold selection using a classic catalytic triad motif for the hydrolysis of p-nitrophenyl acetate. Eighty scaffolds were identified from a scaffold library with 1,491 proteins and four scaffolds were native esterase. Furthermore, enzyme design for complicated substrates was investigated for the hydrolysis of cephalexin using scaffold selection based on two different catalytic motifs. Only three scaffolds were identified from the scaffold library by virtue of the classic catalytic triad-based motif. In contrast, 40 scaffolds were identified using a more flexible, but still preorganized catalytic motif, where one scaffold corresponded to the α-amino acid ester hydrolase that catalyzes the hydrolysis and synthesis of cephalexin. Thus, the complex active site modeling approach for de novo enzyme design with the aid of the improved ProdaMatch program is a promising approach for the creation of active sites with high catalytic

  13. Use of an Improved Matching Algorithm to Select Scaffolds for Enzyme Design Based on a Complex Active Site Model

    PubMed Central

    Huang, Xiaoqiang; Xue, Jing; Lin, Min; Zhu, Yushan

    2016-01-01

    Active site preorganization helps native enzymes electrostatically stabilize the transition state better than the ground state for their primary substrates and achieve significant rate enhancement. In this report, we hypothesize that a complex active site model for active site preorganization modeling should help to create preorganized active site design and afford higher starting activities towards target reactions. Our matching algorithm ProdaMatch was improved by invoking effective pruning strategies and the native active sites for ten scaffolds in a benchmark test set were reproduced. The root-mean squared deviations between the matched transition states and those in the crystal structures were < 1.0 Å for the ten scaffolds, and the repacking calculation results showed that 91% of the hydrogen bonds within the active sites are recovered, indicating that the active sites can be preorganized based on the predicted positions of transition states. The application of the complex active site model for de novo enzyme design was evaluated by scaffold selection using a classic catalytic triad motif for the hydrolysis of p-nitrophenyl acetate. Eighty scaffolds were identified from a scaffold library with 1,491 proteins and four scaffolds were native esterase. Furthermore, enzyme design for complicated substrates was investigated for the hydrolysis of cephalexin using scaffold selection based on two different catalytic motifs. Only three scaffolds were identified from the scaffold library by virtue of the classic catalytic triad-based motif. In contrast, 40 scaffolds were identified using a more flexible, but still preorganized catalytic motif, where one scaffold corresponded to the α-amino acid ester hydrolase that catalyzes the hydrolysis and synthesis of cephalexin. Thus, the complex active site modeling approach for de novo enzyme design with the aid of the improved ProdaMatch program is a promising approach for the creation of active sites with high catalytic

  14. Validation of an accelerated 'demons' algorithm for deformable image registration in radiation therapy

    NASA Astrophysics Data System (ADS)

    Wang, He; Dong, Lei; O'Daniel, Jennifer; Mohan, Radhe; Garden, Adam S.; Kian Ang, K.; Kuban, Deborah A.; Bonnen, Mark; Chang, Joe Y.; Cheung, Rex

    2005-06-01

    A greyscale-based fully automatic deformable image registration algorithm, originally known as the 'demons' algorithm, was implemented for CT image-guided radiotherapy. We accelerated the algorithm by introducing an 'active force' along with an adaptive force strength adjustment during the iterative process. These improvements led to a 40% speed improvement over the original algorithm and a high tolerance of large organ deformations. We used three methods to evaluate the accuracy of the algorithm. First, we created a set of mathematical transformations for a series of patient's CT images. This provides a 'ground truth' solution for quantitatively validating the deformable image registration algorithm. Second, we used a physically deformable pelvic phantom, which can measure deformed objects under different conditions. The results of these two tests allowed us to quantify the accuracy of the deformable registration. Validation results showed that more than 96% of the voxels were within 2 mm of their intended shifts for a prostate and a head-and-neck patient case. The mean errors and standard deviations were 0.5 mm ± 1.5 mm and 0.2 mm ± 0.6 mm, respectively. Using the deformable pelvis phantom, the result showed a tracking accuracy of better than 1.5 mm for 23 seeds implanted in a phantom prostate that was deformed by inflation of a rectal balloon. Third, physician-drawn contours outlining the tumour volumes and certain anatomical structures in the original CT images were deformed along with the CT images acquired during subsequent treatments or during a different respiratory phase for a lung cancer case. Visual inspection of the positions and shapes of these deformed contours agreed well with human judgment. Together, these results suggest that the accelerated demons algorithm has significant potential for delineating and tracking doses in targets and critical structures during CT-guided radiotherapy.

  15. Principles of contour information: Reply to Lim and Leek (2012).

    PubMed

    Singh, Manish; Feldman, Jacob

    2012-07-01

    Lim and Leek (2012) presented a formalization of information along object contours, which they argued was an alternative to the approach taken in our article (Feldman & Singh, 2005). Here, we summarize the 2 approaches, showing that--notwithstanding Lim and Leek's (2012) critical rhetoric--their approach is substantially identical to ours, except for the technical details of the formalism. Following the logic of our article point by point, Lim and Leek (a) defined probabilistic expectations about the geometry of smooth contours (which they based on differential contour geometry, while we used a discrete approximation--the only essential difference in their approach), (b) assumed that information along the contour was proportional to the negative logarithm of probability, following standard information theory, and then (c) extended this formulation to closed contours. We analyze what they described as errors in our approach, all of which rest on mathematical misunderstandings or bizarre misreadings of our article. We also show that their extension to 3-dimensional surfaces and their "modified minima rule" contain fatal deficiencies. PMID:22775501

  16. Incorporating Stream Features into Groundwater Contouring Tools Within GIS.

    PubMed

    Bannister, Roger; Kennelly, Patrick

    2016-03-01

    Hydrogeologists often are called upon to estimate surfaces from discrete, sparse data points. This estimation is often accomplished by manually drawing contours on maps using interpolation methods between points of known value while accounting for features known to influence the water table's surface. By contrast, geographic information systems (GIS) are good at creating smooth continuous surfaces from limited data points and allowing the user to represent the resulting surface resulting with contours, but these automated methods often fail to meet the expectations of many hydrogeologists because they do not include knowledge of other influences on the water table. In this study, we seek to fill this gap in the GIS-based methodology for hydrogeologists through an interactive tool that shapes an interpolated surface based on additional knowledge of the water table inferred from gaining or losing streams. The modified surface is reflected in water table contours that, for example, "V" upstream for gaining streams, and can be interactively adjusted to fit the user's expectations. By modifying not only the contours but also the associated interpolated surface, additional contours will follow the same trend, and the modified surface can be used for other analyses like calculating average gradients and flow paths. The tool leverages Esri's ArcGIS Desktop software, building upon a robust suite of mapping tools. We see this as a prototype for other tools that could be developed for hydrogeologists to account for variations in the water table inferred from local topographic trends, pumping or injection wells, and other hydrogeologic features. PMID:25810357

  17. Infants' perception of subjective contours from apparent motion.

    PubMed

    Yamaguchi, Masami K; Kanazawa, So; Okamura, Hiromi

    2008-01-01

    We examined infants' perception of subjective contours in Subjective-Contour-from-Apparent-Motion (SCAM) stimuli [e.g., Cicerone, C. M., Hoffman, D. D., Gowdy, P. D., & Kim, J. S. (1995). The perception of color from motion. Perception & Psychophysics, 57, 761-777] using the preferential looking technique. The SCAM stimulus is composed of random dots which are assigned two different colors. Circular region assigned one color moved apparently, keeping all dots' location unchanged. In the SCAM stimulus, adults can perceive subjective color spreading and subjective contours in apparent motion (http://c-faculty.chuo-u.ac.jp/ approximately ymasa/okamura/ibd_demo.html). In the present study, we conducted two experiments by using this type of SCAM stimulus. A total of thirty-six 3-8-month-olds participated. In experiment 1, we presented two stimuli to the infants side by side: a SCAM stimulus consisting of different luminance, and a non-SCAM stimulus consisting of isoluminance dots. The results indicated that the 5-8-month-olds showed preference for the SCAM stimuli. In experiments 2 and 3, we confirmed that the infants' preference for the SCAM stimulus was not generated by the local difference and local change made by luminance of dots but by the subjective contours. These results suggest that 5-8-month-olds were able to perceive subjective contours in the SCAM stimuli. PMID:17727955

  18. SU-F-19A-09: Propagation of Organ at Risk Contours for High Dose Rate Brachytherapy Planning for Cervical Cancer: A Deformable Image Registration Comparison

    SciTech Connect

    Bellon, M; Kumarasiri, A; Kim, J; Shah, M; Elshaikh, M; Chetty, I

    2014-06-15

    Purpose: To compare the performance of two deformable image registration (DIR) algorithms for contour propagation and to evaluate the accuracy of DIR for use with high dose rate (HDR) brachytherapy planning for cervical cancer. Methods: Five patients undergoing HDR ring and tandem brachytherapy were included in this retrospective study. All patients underwent CT simulation and replanning prior to each fraction (3–5 fractions total). CT-to-CT DIR was performed using two commercially available software platforms: SmartAdapt, Varian Medical Systems (Demons) and Velocity AI, Velocity Medical Solutions (B-spline). Fraction 1 contours were deformed and propagated to each subsequent image set and compared to contours manually drawn by an expert clinician. Dice similarity coefficients (DSC), defined as, DSC(A,B)=2(AandB)/(A+B) were calculated to quantify spatial overlap between manual (A) and deformed (B) contours. Additionally, clinician-assigned visual scores were used to describe and compare the performance of each DIR method and ultimately evaluate which was more clinically acceptable. Scoring was based on a 1–5 scale—with 1 meaning, “clinically acceptable with no contour changes” and 5 meaning, “clinically unacceptable”. Results: Statistically significant differences were not observed between the two DIR algorithms. The average DSC for the bladder, rectum and rectosigmoid were 0.82±0.08, 0.67±0.13 and 0.48±0.18, respectively. The poorest contour agreement was observed for the rectosigmoid due to limited soft tissue contrast and drastic anatomical changes, i.e., organ shape/filling. Two clinicians gave nearly equivalent average scores of 2.75±0.91 for SmartAdapt and 2.75±0.94 for Velocity AI—indicating that for a majority of the cases, more than one of the three contours evaluated required major modifications. Conclusion: Limitations of both DIR algorithms resulted in inaccuracies in contour propagation in the pelvic region, thus hampering the

  19. A practical fan-beam design and reconstruction algorithm for Active and Passive Computed Tomography of radioactive waste barrels

    NASA Astrophysics Data System (ADS)

    Roy, Tushar; More, M. R.; Ratheesh, Jilju; Sinha, Amar

    2015-09-01

    Active and Passive CT (A&PCT) of waste barrels is mostly carried out in parallel beam configuration due to its relative ease of implementation. This necessitates either using a single detector-source pair and translating the barrel or using multiple detector-source pairs for increasing the scanning speed. Additionally, because the use of bulky HPGe detectors may limit the number of detectors used in both active and passive modes, we propose to use 1″×1″ LaBr3(Ce) scintillators. This paper describes a practical fan-beam reconstruction for A&PCT imaging of waste barrels. A fan beam system model has been computed analytically and reconstruction done using MLEM algorithm. The results are compared with analytical reconstruction.

  20. Aeroacoustics of contoured plug-nozzle supersonic jet flows

    NASA Technical Reports Server (NTRS)

    Dosanjh, D. S.; Das, I. S.

    1986-01-01

    Experimental investigations of the acoustic far-field, the shock associated noise, and the characteristics of the repetitive shock structure of supersonic jet flows issuing from a plug-nozzle having an externally expanded contoured plug with a pointed termination, operated at a range of supercritical pressure ratios of 2.0 to 4.5 are reported. The supersonic jet flow from the contoured plug is shown to be shock-free and virtually wakeless at a pressure ratio of 3.60 (flow Mach number, 1.49). By comparison with the noise characteristics of underexpanded jet flows from an equivalent convergent nozzle, substantial reductions in the total (mixing and the shock associated) noise levels are obtained when the contoured plug nozzle is operated either in the fully-expanded (shock-free) mode or in the over- and the underexpanded modes.

  1. Performance comparisons of contour-based corner detectors.

    PubMed

    Awrangjeb, Mohammad; Lu, Guojun; Fraser, Clive S

    2012-09-01

    Corner detectors have many applications in computer vision and image identification and retrieval. Contour-based corner detectors directly or indirectly estimate a significance measure (e.g., curvature) on the points of a planar curve, and select the curvature extrema points as corners. While an extensive number of contour-based corner detectors have been proposed over the last four decades, there is no comparative study of recently proposed detectors. This paper is an attempt to fill this gap. The general framework of contour-based corner detection is presented, and two major issues-curve smoothing and curvature estimation, which have major impacts on the corner detection performance, are discussed. A number of promising detectors are compared using both automatic and manual evaluation systems on two large datasets. It is observed that while the detectors using indirect curvature estimation techniques are more robust, the detectors using direct curvature estimation techniques are faster. PMID:22645267

  2. Method for measuring the contour of a machined part

    DOEpatents

    Bieg, L.F.

    1995-05-30

    A method is disclosed for measuring the contour of a machined part with a contour gage apparatus, having a probe assembly including a probe tip for providing a measure of linear displacement of the tip on the surface of the part. The contour gage apparatus may be moved into and out of position for measuring the part while the part is still carried on the machining apparatus. Relative positions between the part and the probe tip may be changed, and a scanning operation is performed on the machined part by sweeping the part with the probe tip, whereby data points representing linear positions of the probe tip at prescribed rotation intervals in the position changes between the part and the probe tip are recorded. The method further allows real-time adjustment of the apparatus machining the part, including real-time adjustment of the machining apparatus in response to wear of the tool that occurs during machining. 5 figs.

  3. Method for measuring the contour of a machined part

    DOEpatents

    Bieg, Lothar F.

    1995-05-30

    A method for measuring the contour of a machined part with a contour gage apparatus, having a probe assembly including a probe tip for providing a measure of linear displacement of the tip on the surface of the part. The contour gage apparatus may be moved into and out of position for measuring the part while the part is still carried on the machining apparatus. Relative positions between the part and the probe tip may be changed, and a scanning operation is performed on the machined part by sweeping the part with the probe tip, whereby data points representing linear positions of the probe tip at prescribed rotation intervals in the position changes between the part and the probe tip are recorded. The method further allows real-time adjustment of the apparatus machining the part, including real-time adjustment of the machining apparatus in response to wear of the tool that occurs during machining.

  4. Active-contour-based image segmentation using machine learning techniques.

    PubMed

    Etyngier, Patrick; Ségonne, Florent; Keriven, Renaud

    2007-01-01

    We introduce a non-linear shape prior for the deformable model framework that we learn from a set of shape samples using recent manifold learning techniques. We model a category of shapes as a finite dimensional manifold which we approximate using Diffusion maps. Our method computes a Delaunay triangulation of the reduced space, considered as Euclidean, and uses the resulting space partition to identify the closest neighbors of any given shape based on its Nyström extension. We derive a non-linear shape prior term designed to attract a shape towards the shape prior manifold at given constant embedding. Results on shapes of ventricle nuclei demonstrate the potential of our method for segmentation tasks. PMID:18051143

  5. An active alignment scheme for the MPTS array. [contour sensors

    NASA Technical Reports Server (NTRS)

    Iwasaki, R.

    1980-01-01

    In order to achieve and maintain required flatness of the antenna array, a rotating laser beam used for leveling applications on earth was utilized as a reference system. A photoconductive sensor with a reflective collecting surface determines the displacement and polarity of any misalignment and automatically engages a stepping motor to drive a variable-length mechanism to make the necessary corrections. Once aligned, little power is dissipated since a nulling bridge circuit that centers on the beam is used. A three-point subarray alignment arrangement is described which independently adjusts, in the three orthogonal directions, the height and tilt of subarrays within the MPTS array and readily adapts to any physical distortions of the secondary structure (such as that resulting from severe temperature extremes caused by an eclipse of the Sun). It is shown that only one rotating laser system is required since optical blockage is minimal on the array surface and that it is possible to incorporate a number of redundant laser systems for reliability without affecting the overall performance.

  6. Prevention of Venous Thromboembolism in Body Contouring Surgery

    PubMed Central

    Clavijo-Alvarez, Julio A.; Pannucci, Christopher J.; Oppenheimer, Adam J.; Wilkins, Edwin G.; Rubin, J. Peter

    2015-01-01

    Introduction Venous thromboembolism (VTE) has been identified as a major public health issue. Postbariatric body contouring surgery represents a major challenge for VTE prophylaxis due to the presence of multiple risk factors and broad areas of dissection that potentially increase the risk of postoperative bleeding. Aim To define current VTE prophylaxis practices among surgeons of the American Society of Plastic Surgeons, performing postbariatric body contouring surgery in the United States. Material and Methods A total of 4081 surveys were sent to registered members of the American Society of Plastic Surgeons by e-mail. We received 596 (14.6%) responses. Results A total of 596 surgeons returned completed surveys, with 83% of respondents in private practice and 17% in academic practice. Deep venous thrombosis (DVT) was reported by 40% surgeons, pulmonary embolism (PE) by 34%, and 7% had at least 1 patient having died of a postoperative PE. About 39% to 48% participant surgeons reported providing no chemoprophylaxis to their postbariatric body contouring patients. The most common reason for not using routine prophylaxis was the concern for bleeding (84%), followed by lack of evidence specific to plastic surgery practice (50%). Academic surgeons were more likely to provide chemoprophylaxis when compared with those in nonacademic practice (P < 0.05). Conclusion For postbariatric body contouring surgery, DVT has occurred in over one-third of plastic surgeons’ practices with 7% of surgeons reporting a patient death from PE. A substantial proportion of surgeons performing postbariatric body contouring are not using chemoprophylaxis due to bleeding risk and perceived lack of evidence. VTE prophylaxis in postbariatric body contouring remains a topic that deserves further study. PMID:21200311

  7. Ensemble Empirical Mode Decomposition Analysis of EEG Data Collected during a Contour Integration Task

    PubMed Central

    Al-Subari, Karema; Al-Baddai, Saad; Tomé, Ana Maria; Volberg, Gregor; Hammwöhner, Rainer; Lang, Elmar W.

    2015-01-01

    We discuss a data-driven analysis of EEG data recorded during a combined EEG/fMRI study of visual processing during a contour integration task. The analysis is based on an ensemble empirical mode decomposition (EEMD) and discusses characteristic features of event related modes (ERMs) resulting from the decomposition. We identify clear differences in certain ERMs in response to contour vs noncontour Gabor stimuli mainly for response amplitudes peaking around 100 [ms] (called P100) and 200 [ms] (called N200) after stimulus onset, respectively. We observe early P100 and N200 responses at electrodes located in the occipital area of the brain, while late P100 and N200 responses appear at electrodes located in frontal brain areas. Signals at electrodes in central brain areas show bimodal early/late response signatures in certain ERMs. Head topographies clearly localize statistically significant response differences to both stimulus conditions. Our findings provide an independent proof of recent models which suggest that contour integration depends on distributed network activity within the brain. PMID:25910061

  8. Ideality contours and thermodynamic regularities in supercritical molecular fluids

    NASA Astrophysics Data System (ADS)

    Desgranges, Caroline; Margo, Abigail; Delhommelle, Jerome

    2016-08-01

    Using Expanded Wang-Landau simulations, we calculate the ideality contours for 3 molecular fluids (SF6, CO2 and H2O). We analyze how the increase in polarity, and thus, in the strength of the intermolecular interactions, impacts the contours and thermodynamic regularities. This effect results in the increase in the Boyle and H parameters, that underlie the Zeno line and the curve of ideal enthalpy. Furthermore, a detailed analysis reveals that dipole-dipole interactions lead to much larger enthalpic contributions to the Gibbs free energy. This accounts for the much higher temperatures and pressures that are necessary for supercritical H2O to achieve ideal-like thermodynamic properties.

  9. Soil Moisture Active Passive (SMAP) Project Algorithm Theoretical Basis Document SMAP L1B Radiometer Data Product: L1B_TB

    NASA Technical Reports Server (NTRS)

    Piepmeier, Jeffrey; Mohammed, Priscilla; De Amici, Giovanni; Kim, Edward; Peng, Jinzheng; Ruf, Christopher; Hanna, Maher; Yueh, Simon; Entekhabi, Dara

    2016-01-01

    The purpose of the Soil Moisture Active Passive (SMAP) radiometer calibration algorithm is to convert Level 0 (L0) radiometer digital counts data into calibrated estimates of brightness temperatures referenced to the Earth's surface within the main beam. The algorithm theory in most respects is similar to what has been developed and implemented for decades for other satellite radiometers; however, SMAP includes two key features heretofore absent from most satellite borne radiometers: radio frequency interference (RFI) detection and mitigation, and measurement of the third and fourth Stokes parameters using digital correlation. The purpose of this document is to describe the SMAP radiometer and forward model, explain the SMAP calibration algorithm, including approximations, errors, and biases, provide all necessary equations for implementing the calibration algorithm and detail the RFI detection and mitigation process. Section 2 provides a summary of algorithm objectives and driving requirements. Section 3 is a description of the instrument and Section 4 covers the forward models, upon which the algorithm is based. Section 5 gives the retrieval algorithm and theory. Section 6 describes the orbit simulator, which implements the forward model and is the key for deriving antenna pattern correction coefficients and testing the overall algorithm.

  10. Contour Connection Method for automated identification and classification of landslide deposits

    NASA Astrophysics Data System (ADS)

    Leshchinsky, Ben A.; Olsen, Michael J.; Tanyu, Burak F.

    2015-01-01

    Landslides are a common hazard worldwide that result in major economic, environmental and social impacts. Despite their devastating effects, inventorying existing landslides, often the regions at highest risk of reoccurrence, is challenging, time-consuming, and expensive. Current landslide mapping techniques include field inventorying, photogrammetric approaches, and use of bare-earth (BE) lidar digital terrain models (DTMs) to highlight regions of instability. However, many techniques do not have sufficient resolution, detail, and accuracy for mapping across landscape scale with the exception of using BE DTMs, which can reveal the landscape beneath vegetation and other obstructions, highlighting landslide features, including scarps, deposits, fans and more. Current approaches to landslide inventorying with lidar to create BE DTMs include manual digitizing, statistical or machine learning approaches, and use of alternate sensors (e.g., hyperspectral imaging) with lidar. This paper outlines a novel algorithm to automatically and consistently detect landslide deposits on a landscape scale. The proposed method is named as the Contour Connection Method (CCM) and is primarily based on bare earth lidar data requiring minimal user input such as the landslide scarp and deposit gradients. The CCM algorithm functions by applying contours and nodes to a map, and using vectors connecting the nodes to evaluate gradient and associated landslide features based on the user defined input criteria. Furthermore, in addition to the detection capabilities, CCM also provides an opportunity to be potentially used to classify different landscape features. This is possible because each landslide feature has a distinct set of metadata - specifically, density of connection vectors on each contour - that provides a unique signature for each landslide. In this paper, demonstrations of using CCM are presented by applying the algorithm to the region surrounding the Oso landslide in Washington

  11. Changes of contour of the spine caused by load carrying.

    PubMed

    Vacheron, J J; Poumarat, G; Chandezon, R; Vanneuville, G

    1999-01-01

    The development of new leisure activities such as walking has spread the use of the backpack as a means of carrying loads. The aim of this work was to present a way of defining the movements imposed on the trunk by this type of load carrying. A 20 kg load situated at the thoracic level (T9) of the trunk, was placed in a backpack (2.5 kg). The 12 subjects were average mountain guides of Auvergne region, intermediate level and complete beginners. External markers were glued to the projecting contours of the spinous processes of the C7, T7, T12, L3 and S1 vertebrae, the shin and the external occipital tuberosity (EOT). Using a Vicon 140 3-D system we measured the effective mobility of the different spinal segments in the sagittal plane during one step. For every subject, we noticed a significant decrease of the effective inter-segmental mobility (EISM) between S1-L3-T12 (p < .01) while backpacking a 22.5 kg load. A decrease of EISM also appeared at the next level between L3-T12-T7 (p < .05). An increase of the EISM between T7-C7-EOT was noted (p < .05). We supposed that strength loss of the back muscles and/or angular oscillations of the trunk could be a common cause of symptoms during backpacking. The subjects using this type of load carrying have to adopt an adequate position of the lumbar, dorsal and cervical vertebrae. PMID:10399210

  12. An Active Sensor Nitrogen Application Algorithm for Corn Using a Chlorophyll Meter Based Sufficiency Index Concept

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Traditional N fertilizer management schemes for U.S. corn production systems have resulted in low N use efficiency, reduced water quality, and considerable public debate regarding N use in crop production. We have built a prototype high clearance N applicator configured with active sensors, controll...

  13. Driver hand activity analysis in naturalistic driving studies: challenges, algorithms, and experimental studies

    NASA Astrophysics Data System (ADS)

    Ohn-Bar, Eshed; Martin, Sujitha; Trivedi, Mohan Manubhai

    2013-10-01

    We focus on vision-based hand activity analysis in the vehicular domain. The study is motivated by the overarching goal of understanding driver behavior, in particular as it relates to attentiveness and risk. First, the unique advantages and challenges for a nonintrusive, vision-based solution are reviewed. Next, two approaches for hand activity analysis, one relying on static (appearance only) cues and another on dynamic (motion) cues, are compared. The motion-cue-based hand detection uses temporally accumulated edges in order to maintain the most reliable and relevant motion information. The accumulated image is fitted with ellipses in order to produce the location of the hands. The method is used to identify three hand activity classes: (1) two hands on the wheel, (2) hand on the instrument panel, (3) hand on the gear shift. The static-cue-based method extracts features in each frame in order to learn a hand presence model for each of the three regions. A second-stage classifier (linear support vector machine) produces the final activity classification. Experimental evaluation with different users and environmental variations under real-world driving shows the promise of applying the proposed systems for both postanalysis of captured driving data as well as for real-time driver assistance.

  14. SEM-contour shape analysis based on circuit structure for advanced systematic defect inspection

    NASA Astrophysics Data System (ADS)

    Toyoda, Yasutaka; Shindo, Hiroyuki; Hojo, Yutaka; Fuchimoto, Daisuke

    2014-04-01

    We have developed a practicable measurement technique that can help to achieve reliable inspections for systematic defects in advanced semiconductor devices. Systematic defects occurring in the design and mask processes are a dominant component of integrated circuit yield loss in nano-scaled technologies. Therefore, it is essential to ensure systematic defects are detected at an early stage of wafer fabrication. In the past, printed pattern shapes have been evaluated by human eyes or by taking manual critical dimension (CD) measurements. However, these operations are sometimes unstable and inaccurate. Last year, we proposed a new technique for taking measurements by using a SEM contour [1]. This technique enables a highly precise quantification of various complex 2D shaped patterns by comparing a contour extracted from a SEM image using a CD measurement algorithm and an ideal pattern. We improved this technique to enable the carrying out of inspections suitable for every pattern structure required for minimizing the process margin. This technique quantifies a pattern shape of a target-layer pattern using information on a multi-layered circuit structure. This enabled it to confirm the existence of a critical defect in a circuit connecting upper/lower-layers. This paper describes the improved technique and the evaluation results obtained in evaluating it in detail.

  15. Acrosome integrity assessment of boar spermatozoa images using an early fusion of texture and contour descriptors.

    PubMed

    García-Olalla, Oscar; Alegre, Enrique; Fernández-Robles, Laura; Malm, Patrik; Bengtsson, Ewert

    2015-06-01

    The assessment of the state of the acrosome is a priority in artificial insemination centres since it is one of the main causes of function loss. In this work, boar spermatozoa present in gray scale images acquired with a phase-contrast microscope have been classified as acrosome-intact or acrosome-damaged, after using fluorescent images for creating the ground truth. Based on shape prior criteria combined with Otsu's thresholding, regional minima and watershed transform, the spermatozoa heads were segmented and registered. One of the main novelties of this proposal is that, unlike what previous works stated, the obtained results show that the contour information of the spermatozoon head is important for improving description and classification. Other of this work novelties is that it confirms that combining different texture descriptors and contour descriptors yield the best classification rates for this problem up to date. The classification was performed with a Support Vector Machine backed by a Least Squares training algorithm and a linear kernel. Using the biggest acrosome intact-damaged dataset ever created, the early fusion approach followed provides a 0.9913 F-Score, outperforming all previous related works. PMID:25887848

  16. Study on inner hole testing of nozzle with small size and complex contour

    NASA Astrophysics Data System (ADS)

    Zhang, Liang; Su, Jun-hong; Yang, Li-hong; Xu, Jun-qi

    2010-10-01

    Testing of small size and complex contour of Nozzle, an important component affecting the engine performance, is very difficult, particularly for the inner hole. Due to difficulty in holding, it is easy to scrap the surface of the inner hole by the traditional contact-type detection methods. In this paper testing method of the hole is researched in details with image stitching technology. In the testing, a serial of focused images in different depths of inner hole of nozzle are collected by CCD camera, and compared by image focusing evaluation function, thus depth information in various locations of the inner hole images is obtained. A full depth image, the panorama of the inner hole, is rebuilt by multi-focus image fusion algorithm, for the image pixels corresponding to the focus altitudes are segmented. To achieve 3D reconstruction of the inner hole, the depth information by linear interpolation is fitted to restore a precise inner hole depth information. The results show that the inner hole of nozzle can be tested precisely with high precision which can meet the design requirements, and the entire contour can be reconstructed by the testing method.

  17. SU-E-J-151: Dosimetric Evaluation of DIR Mapped Contours for Image Guided Adaptive Radiotherapy with 4D Cone-Beam CT

    SciTech Connect

    Balik, S; Weiss, E; Williamson, J; Hugo, G; Jan, N; Zhang, L; Roman, N; Christensen, G

    2014-06-01

    Purpose: To estimate dosimetric errors resulting from using contours deformably mapped from planning CT to 4D cone beam CT (CBCT) images for image-guided adaptive radiotherapy of locally advanced non-small cell lung cancer (NSCLC). Methods: Ten locally advanced non-small cell lung cancer (NSCLC) patients underwent one planning 4D fan-beam CT (4DFBCT) and weekly 4DCBCT scans. Multiple physicians delineated the gross tumor volume (GTV) and normal structures in planning CT images and only GTV in CBCT images. Manual contours were mapped from planning CT to CBCTs using small deformation, inverse consistent linear elastic (SICLE) algorithm for two scans in each patient. Two physicians reviewed and rated the DIR-mapped (auto) and manual GTV contours as clinically acceptable (CA), clinically acceptable after minor modification (CAMM) and unacceptable (CU). Mapped normal structures were visually inspected and corrected if necessary, and used to override tissue density for dose calculation. CTV (6mm expansion of GTV) and PTV (5mm expansion of CTV) were created. VMAT plans were generated using the DIR-mapped contours to deliver 66 Gy in 33 fractions with 95% and 100% coverage (V66) to PTV and CTV, respectively. Plan evaluation for V66 was based on manual PTV and CTV contours. Results: Mean PTV V66 was 84% (range 75% – 95%) and mean CTV V66 was 97% (range 93% – 100%) for CAMM scored plans (12 plans); and was 90% (range 80% – 95%) and 99% (range 95% – 100%) for CA scored plans (7 plans). The difference in V66 between CAMM and CA was significant for PTV (p = 0.03) and approached significance for CTV (p = 0.07). Conclusion: The quality of DIR-mapped contours directly impacted the plan quality for 4DCBCT-based adaptation. Larger safety margins may be needed when planning with auto contours for IGART with 4DCBCT images. Reseach was supported by NIH P01CA116602.

  18. TU-C-17A-04: BEST IN PHYSICS (THERAPY) - A Supervised Framework for Automatic Contour Assessment for Radiotherapy Planning of Head- Neck Cancer

    SciTech Connect

    Chen, H; Kavanaugh, J; Tan, J; Dolly, S; Gay, H; Thorstad, W; Anastasio, M; Altman, M; Mutic, S; Li, H

    2014-06-15

    Purpose: Precise contour delineation of tumor targets and critical structures from CT simulations is essential for accurate radiotherapy (RT) treatment planning. However, manual and automatic delineation processes can be error prone due to limitations in imaging techniques and individual anatomic variability. Tedious and laborious manual verification is hence needed. This study develops a general framework for automatically assessing RT contours for head-neck cancer patients using geometric attribute distribution models (GADMs). Methods: Geometric attributes (centroid and volume) were computed from physician-approved RT contours of 29 head-neck patients. Considering anatomical correlation between neighboring structures, the GADM for each attribute was trained to characterize intra- and interpatient structure variations using principal component analysis. Each trained GADM was scalable and deformable, but constrained by the principal attribute variations of the training contours. A new hierarchical model adaptation algorithm was utilized to assess the RT contour correctness for a given patient. Receiver operating characteristic (ROC) curves were employed to evaluate and tune system parameters for the training models. Results: Experiments utilizing training and non-training data sets with simulated contouring errors were conducted to validate the framework performance. Promising assessment results of contour normality/abnormality for the training contour-based data were achieved with excellent accuracy (0.99), precision (0.99), recall (0.83), and F-score (0.97), while corresponding values of 0.84, 0.96, 0.83, and 0.9 were achieved for the non-training data. Furthermore, the areas under the ROC curves were above 0.9, validating the accuracy of this test. Conclusion: The proposed framework can reliably identify contour normality/abnormality based upon intra- and inter-structure constraints derived from clinically-approved contours. It also allows physicians to

  19. New Algorithm for CAD Solid Model Direct Slicing on Rapid Prototyping

    NASA Astrophysics Data System (ADS)

    Zhou, Huiqun; Wu, Jianjun

    In the paper, a new algorithm for CAD solid model direct slicing has been given. The three-dimensional CAD solid models have been divided into a series of layer which meeting tolerance required on the basis of rapid prototyping. Section contour extraction method has been adopted, then, section contour has been into line, arc, free curves, and the data is stored in a specific file format. In the contour interior, scanning area has been formed. The examples show that the algorithm can better achieve layered manufacturing to rapid prototyping.

  20. Magnetic resonance segmentation with the bubble wave algorithm

    NASA Astrophysics Data System (ADS)

    Cline, Harvey E.; Ludke, Siegwalt

    2003-05-01

    A new bubble wave algorithm provides automatic segmentation of three-dimensional magnetic resonance images of both the peripheral vasculature and the brain. Simple connectivity algorithms are not reliable in these medical applications because there are unwanted connections through background noise. The bubble wave algorithm restricts connectivity using curvature by testing spherical regions on a propagating active contour to eliminate noise bridges. After the user places seeds in both the selected regions and in the regions that are not desired, the method provides the critical threshold for segmentation using binary search. Today, peripheral vascular disease is diagnosed using magnetic resonance imaging with a timed contrast bolus. A new blood pool contrast agent MS-325 (Epix Medical) binds to albumen in the blood and provides high-resolution three-dimensional images of both arteries and veins. The bubble wave algorithm provides a means to automatically suppress the veins that obscure the arteries in magnetic resonance angiography. Monitoring brain atrophy is needed for trials of drugs that retard the progression of dementia. The brain volume is measured by placing seeds in both the brain and scalp to find the critical threshold that prevents connections between the brain volume and the scalp. Examples from both three-dimensional magnetic resonance brain and contrast enhanced vascular images were segmented with minimal user intervention.

  1. Temperature Contours and Ghost Surfaces for Chaotic Magnetic Fields

    SciTech Connect

    Hudson, S. R.; Breslau, J.

    2008-03-07

    Steady state solutions for anisotropic heat transport in a chaotic magnetic field are determined numerically and compared to a set of 'ghost surfaces' -surfaces constructed via an action-gradient flow between the minimax and minimizing periodic orbits. The ghost surfaces are in remarkable agreement with the temperature contours.

  2. 8. RHODES DITCH: VIEW TO SOUTHEAST, SHOWING SHARP 'U' CONTOURED ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    8. RHODES DITCH: VIEW TO SOUTHEAST, SHOWING SHARP 'U' CONTOURED ABOVE SWALE. DITCH IS ALSO VISIBLE IN DISTANCE, RUNNING HORIZONTALLY ACROSS PHOTO, ON FAR HILLSIDE. - Natomas Ditch System, Rhodes Ditch, West of Bidwell Street, north of U.S. Highway 50, Folsom, Sacramento County, CA

  3. Semiautomatic contour detection in ultrasound M-mode images.

    PubMed

    Rabben, S I; Torp, A H; Støylen, A; Slørdahl, S; Bjørnstad, K; Haugen, B O; Angelsen, B

    2000-02-01

    We have developed a method for semiautomatic contour detection in M-mode images. The method combines tissue Doppler and grey-scale data. It was used to detect: 1. the left endocardium of the septum, the endocardium and epicardium of the posterior wall in 16 left ventricular short-axis M-modes, and 2. the mitral ring in 38 anatomical M-modes extracted pair-wise in 19 apical four-chamber cine-loops (healthy subjects). We validated the results by comparing the computer-generated contours with contours manually outlined by four echocardiographers. For all boundaries, the average distance between the computer-generated contours and the manual outlines was smaller than the average distance between the manual outlines. We also calculated left ventricular wall thickness and diameter at end-diastole and end-systole and lateral and septal mitral ring excursions, and found, on average, clinically negligible differences between the computer-generated indices and the same indices based on manual outlines (0.8-1.8 mm). The results were also within published normal values. In conclusion, this initial study showed that it was feasible in a robust and efficient manner to detect continuous wall boundaries in M-mode images so that tracings of left ventricular wall thickness, diameter and long axis could be derived. PMID:10722918

  4. A contoured continuum surface force model for particle methods

    NASA Astrophysics Data System (ADS)

    Duan, Guangtao; Koshizuka, Seiichi; Chen, Bin

    2015-10-01

    A surface tension model is essential to simulate multiphase flows with deformed interfaces. This study develops a contoured continuum surface force (CCSF) model for particle methods. A color function that varies sharply across the interface to mark different fluid phases is smoothed in the transition region, where the local contour curvature can be regarded as the interface curvature. The local contour passing through each reference particle in the transition region is extracted from the local profile of the smoothed color function. The local contour curvature is calculated based on the Taylor series expansion of the smoothed color function, whose derivatives are calculated accurately according to the definition of the smoothed color function. Two schemes are proposed to specify the smooth radius: fixed scheme, where 2 ×re (re = particle interaction radius) is assigned to all particles in the transition region; and varied scheme, where re and 2 ×re are assigned to the central and edged particles in the transition region respectively. Numerical examples, including curvature calculation for static circle and ellipse interfaces, deformation of square droplet to a circle (2D and 3D), droplet deformation in shear flow, and droplet coalescence, are simulated to verify the CCSF model and compare its performance with those of other methods. The CCSF model with the fixed scheme is proven to produce the most accurate curvature and lowest parasitic currents among the tested methods.

  5. Temperature Contours and Ghost-Surfaces for Chaotic Magnetic Fields

    SciTech Connect

    S.R. Hudson and J. Breslau

    2008-01-31

    Steady state solutions for anisotropic heat transport in a chaotic magnetic field are determined numerically and compared to a set of "ghost-surfaces", surfaces constructed via an action-gradient flow between the minimax and minimizing periodic orbits. The ghost-surfaces are in remarkable agreement with the temperature contours.

  6. Two-dimensional flow patterns near contour grass hedges

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Grass hedges are narrow strips of stiff-stemmed vegetation used to control erosion and sediment delivery. When planted on the contour, the hydraulic resistance of the vegetation slows runoff, creates ponding, and promotes sediment deposition. In addition, when tillage is performed between grass he...

  7. Induction of Kanizsa Contours Requires Awareness of the Inducing Context.

    PubMed

    Banica, Theodora; Schwarzkopf, D Samuel

    2016-01-01

    It remains unknown to what extent the human visual system interprets information about complex scenes without conscious analysis. Here we used visual masking techniques to assess whether illusory contours (Kanizsa shapes) are perceived when the inducing context creating this illusion does not reach awareness. In the first experiment we tested perception directly by having participants discriminate the orientation of an illusory contour. In the second experiment, we exploited the fact that the presence of an illusory contour enhances performance on a spatial localization task. Moreover, in the latter experiment we also used a different masking method to rule out the effect of stimulus duration. Our results suggest that participants do not perceive illusory contours when they are unaware of the inducing context. This is consistent with theories of a multistage, recurrent process of perceptual integration. Our findings thus challenge some reports, including those from neurophysiological experiments in anaesthetized animals. Furthermore, we discuss the importance to test the presence of the phenomenal percept directly with appropriate methods. PMID:27518569

  8. Principles of Contour Information: Reply to Lim and Leek (2012)

    ERIC Educational Resources Information Center

    Singh, Manish; Feldman, Jacob

    2012-01-01

    Lim and Leek (2012) presented a formalization of information along object contours, which they argued was an alternative to the approach taken in our article (Feldman & Singh, 2005). Here, we summarize the 2 approaches, showing that--notwithstanding Lim and Leek's (2012) critical rhetoric--their approach is substantially identical to ours, except…

  9. Acoustical Measurements of Selected Intonation Contours of French.

    ERIC Educational Resources Information Center

    Howie, John M.

    Recent studies of rising intonation contours in French, in particular the acoustical differences that serve to distinguish Yes/No questions from other rising intonations are reviewed. The preliminary results of a pilot study of rising intonations in French, in which average curves were obtained from spectrographic measurements of fundamental…

  10. Induction of Kanizsa Contours Requires Awareness of the Inducing Context

    PubMed Central

    Banica, Theodora; Schwarzkopf, D. Samuel

    2016-01-01

    It remains unknown to what extent the human visual system interprets information about complex scenes without conscious analysis. Here we used visual masking techniques to assess whether illusory contours (Kanizsa shapes) are perceived when the inducing context creating this illusion does not reach awareness. In the first experiment we tested perception directly by having participants discriminate the orientation of an illusory contour. In the second experiment, we exploited the fact that the presence of an illusory contour enhances performance on a spatial localization task. Moreover, in the latter experiment we also used a different masking method to rule out the effect of stimulus duration. Our results suggest that participants do not perceive illusory contours when they are unaware of the inducing context. This is consistent with theories of a multistage, recurrent process of perceptual integration. Our findings thus challenge some reports, including those from neurophysiological experiments in anaesthetized animals. Furthermore, we discuss the importance to test the presence of the phenomenal percept directly with appropriate methods. PMID:27518569

  11. Visual perception: bizarre contours go against the odds.

    PubMed

    Fleming, Roland W

    2011-04-12

    A new study shows that the brain sometimes invents visual contours even when they would be highly unlikely to occur in the real world. This presents a challenge to theories assuming that the brain prefers the most probable interpretation of the retinal image. PMID:21481763

  12. Aerospike nozzle contour design and its performance validation

    NASA Astrophysics Data System (ADS)

    Wang, Chang-Hui; Liu, Yu; Qin, Li-Zi

    2009-06-01

    A simplified design and optimization method of aerospike nozzle contour and the results of tests and numerical simulation of aerospike nozzles are presented. The primary nozzle contour is approximated by two circular arcs and a parabola; the plug contour is approximated by a parabola and a third-order polynomial. The maximum total impulse from sea level to design altitude is adopted as objective to optimize the aerospike nozzle contour. Experimental studies were performed on a 6-cell tile-shaped aerospike nozzle, a 1-cell linear aerospike nozzle and a 3-cell aerospike nozzle with round-to-rectangle (RTR) primary nozzles designed by method proposed in present paper. Three aerospike nozzles achieved good altitude compensation capacities in the tests and still had better performance at off-design altitudes compared with that of the bell-shaped nozzle. In cold-flow tests, 6-cell tile-shaped aerospike nozzle and 1-cell linear aerospike nozzle obtained high thrust efficiency at design altitude. Employing gas H 2/gas O 2 (GH 2/GO 2) as propellants, hot-firing tests were carried out on a 3-cell aerospike nozzle engine with RTR primary nozzles. The performance was obtained under two nozzle pressure ratios (NPR) lower than design altitude. Efficiency reached 92.0-93.5% and 95.0-96.0%, respectively. Pressure distribution along plug ramp was measured and the effects of variation in the amount of base bleed on performance were also examined in the tests.

  13. Runoff through and upslope of contour switchgrass hedges

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Grass hedges are specialized vegetative buffers effective in trapping sediment but less is known about their ability to reduce and/or redirect runoff. Runoff and sediment yield from natural rainfall were measured during eight years from 0.1-ha contour-planted plots with and without 1-m wide switchgr...

  14. 22. NORTH BRANCH, PRAIRIE CITY DITCH, CONTOURING AROUND SIDE OF ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    22. NORTH BRANCH, PRAIRIE CITY DITCH, CONTOURING AROUND SIDE OF KNOLL. DITCH LIES BETWEEN OAK TREE AND POINTED ROCKS, AND EXITS PHOTOGRAPH AT LOWER RIGHT CORNER. VIEW TO NORTHEAST. - Natomas Ditch System, Rhodes Ditch, West of Bidwell Street, north of U.S. Highway 50, Folsom, Sacramento County, CA

  15. Are Children with Autistic Spectrum Disorders Susceptible to Contour Illusions?

    ERIC Educational Resources Information Center

    Milne, Elizabeth; Scope, Alison

    2008-01-01

    Children with autism have been shown to be less susceptible to Kanisza type contour illusions than children without autism (Happe, 1996). Other authors have suggested that this finding could be explained by the fact that participants with autism were required to make a potentially ambiguous verbal response which may have masked whether or not they…

  16. Effects of Lexical Tone Contour on Mandarin Sentence Intelligibility

    ERIC Educational Resources Information Center

    Chen, Fei; Wong, Lena L. N.; Hu, Yi

    2014-01-01

    Purpose: This study examined the effects of lexical tone contour on the intelligibility of Mandarin sentences in quiet and in noise. Method: A text-to-speech synthesis engine was used to synthesize Mandarin sentences with each word carrying the original lexical tone, flat tone, or a tone randomly selected from the 4 Mandarin lexical tones. The…

  17. How Does Fingolimod (Gilenya®) Fit in the Treatment Algorithm for Highly Active Relapsing-Remitting Multiple Sclerosis?

    PubMed Central

    Fazekas, Franz; Bajenaru, Ovidiu; Berger, Thomas; Fabjan, Tanja Hojs; Ledinek, Alenka Horvat; Jakab, Gábor; Komoly, Samuel; Kobys, Tetiana; Kraus, Jörg; Kurča, Egon; Kyriakides, Theodoros; Lisý, L'ubomír; Milanov, Ivan; Nehrych, Tetyana; Moskovko, Sergii; Panayiotou, Panayiotis; Jazbec, Saša Šega; Sokolova, Larysa; Taláb, Radomír; Traykov, Latchezar; Turčáni, Peter; Vass, Karl; Vella, Norbert; Voloshyná, Nataliya; Havrdová, Eva

    2013-01-01

    Multiple sclerosis (MS) is a neurological disorder characterized by inflammatory demyelination and neurodegeneration in the central nervous system. Until recently, disease-modifying treatment was based on agents requiring parenteral delivery, thus limiting long-term compliance. Basic treatments such as beta-interferon provide only moderate efficacy, and although therapies for second-line treatment and highly active MS are more effective, they are associated with potentially severe side effects. Fingolimod (Gilenya®) is the first oral treatment of MS and has recently been approved as single disease-modifying therapy in highly active relapsing-remitting multiple sclerosis (RRMS) for adult patients with high disease activity despite basic treatment (beta-interferon) and for treatment-naïve patients with rapidly evolving severe RRMS. At a scientific meeting that took place in Vienna on November 18th, 2011, experts from ten Central and Eastern European countries discussed the clinical benefits and potential risks of fingolimod for MS, suggested how the new therapy fits within the current treatment algorithm and provided expert opinion for the selection and management of patients. PMID:23641231

  18. Standardization of surgical techniques used in facial bone contouring.

    PubMed

    Lee, Tae Sung

    2015-12-01

    Since the introduction of facial bone contouring surgery for cosmetic purposes, various surgical methods have been used to improve the aesthetics of facial contours. In general, by standardizing the surgical techniques, it is possible to decrease complication rates and achieve more predictable surgical outcomes, thereby increasing patient satisfaction. The technical strategies used by the author to standardize facial bone contouring procedures are introduced here. The author uses various pre-manufactured surgical tools and hardware for facial bone contouring. During a reduction malarplasty or genioplasty procedure, double-bladed reciprocating saws and pre-bent titanium plates customized for the zygomatic body, arch and chin are used. Various guarded oscillating saws are used for mandibular angloplasty. The use of double-bladed saws and pre-bent plates to perform reduction malarplasty reduces the chances of post-operative asymmetry or under- or overcorrection of the zygoma contours due to technical faults. Inferior alveolar nerve injury and post-operative jawline asymmetry or irregularity can be reduced by using a guarded saw during mandibular angloplasty. For genioplasty, final placement of the chin in accordance with preoperative quantitative analysis can be easily performed with pre-bent plates, and a double-bladed saw allows more procedural accuracy during osteotomies. Efforts by the surgeon to avoid unintentional faults are key to achieving satisfactory results and reducing the incidence of complications. The surgical techniques described in this study in conjunction with various in-house surgical tools and modified hardware can be used to standardize techniques to achieve aesthetically gratifying outcomes. PMID:26346781

  19. Contour-based two-dimension mask pattern metrology

    NASA Astrophysics Data System (ADS)

    Tian, Mingjing; Wang, Jianwei; Bandoh, Hideaki; Guo, Eric; Lu, Max

    2015-10-01

    Mask pattern measurement becomes one of the main challenges for the quality evaluation of the mask which is applied with complex lithography optical effect correction. Traditional straight edge mask pattern is evaluated with 1-dimension Critical Dimension (CD) method. But for 2-dimension pattern especially the mask full filled with complex shapes OPC pattern, many special approaches are studied attempt to characterize 2D pattern from different points of view [1-5]. A simple CD's information and the traditional mask performance evaluation parameters, such as CD mean-to-target and CD uniformity, are no longer suitable to such 2D pattern due to lacking of the pattern's character descriptions. Therefore the CD performances may not represent the actual wafer printing result in many cases. In addition, non-straight pattern edge induces significant CD measure error which makes it difficult to clarify the real mask pattern making quality. This paper investigates a pattern contour based solution for 2D structure performance evaluation. The basic contours of GDS and CD-SEM image are extracted, overlapped and processed and then the edge roughness of SEM contour and the bias between the above two kinds of contour are adopted on 2D individual pattern performance's statistics. By utilizing this solution, the 2D pattern quality can be described quantitatively as two main aspects, shape and size with the results of edge roughness and bias. Generalize this solution, the 2D pattern's uniformity, mean size, or other performances, can be evaluated quantitatively in the similar way as well. This solution calculation bases on pattern contour, therefore the measure pattern is not restricted by its shape.

  20. High quality surface reconstruction in radiotherapy: Cross-sectional contours to 3D mesh using wavelets.

    PubMed

    Moriconi, S; Scalco, E; Broggi, S; Avuzzi, B; Valdagni, R; Rizzo, G

    2015-08-01

    A novel approach for three-dimensional (3D) surface reconstruction of anatomical structures in radiotherapy (RT) is presented. This is obtained from manual cross-sectional contours by combining both image voxel segmentation processing and implicit surface streaming methods using wavelets. 3D meshes reconstructed with the proposed approach are compared to those obtained from traditional triangulation algorithm. Qualitative and quantitative evaluations are performed in terms of mesh quality metrics. Differences in smoothness, detail and accuracy are observed in the comparison, considering three different anatomical districts and several organs at risk in radiotherapy. Overall best performances were recorded for the proposed approach, regardless the complexity of the anatomical structure. This demonstrates the efficacy of the proposed approach for the 3D surface reconstruction in radiotherapy and allows for further specific image analyses using real biomedical data. PMID:26737226