Science.gov

Sample records for active fault database

  1. Central Asia Active Fault Database

    NASA Astrophysics Data System (ADS)

    Mohadjer, Solmaz; Ehlers, Todd A.; Kakar, Najibullah

    2014-05-01

    The ongoing collision of the Indian subcontinent with Asia controls active tectonics and seismicity in Central Asia. This motion is accommodated by faults that have historically caused devastating earthquakes and continue to pose serious threats to the population at risk. Despite international and regional efforts to assess seismic hazards in Central Asia, little attention has been given to development of a comprehensive database for active faults in the region. To address this issue and to better understand the distribution and level of seismic hazard in Central Asia, we are developing a publically available database for active faults of Central Asia (including but not limited to Afghanistan, Tajikistan, Kyrgyzstan, northern Pakistan and western China) using ArcGIS. The database is designed to allow users to store, map and query important fault parameters such as fault location, displacement history, rate of movement, and other data relevant to seismic hazard studies including fault trench locations, geochronology constraints, and seismic studies. Data sources integrated into the database include previously published maps and scientific investigations as well as strain rate measurements and historic and recent seismicity. In addition, high resolution Quickbird, Spot, and Aster imagery are used for selected features to locate and measure offset of landforms associated with Quaternary faulting. These features are individually digitized and linked to attribute tables that provide a description for each feature. Preliminary observations include inconsistent and sometimes inaccurate information for faults documented in different studies. For example, the Darvaz-Karakul fault which roughly defines the western margin of the Pamir, has been mapped with differences in location of up to 12 kilometers. The sense of motion for this fault ranges from unknown to thrust and strike-slip in three different studies despite documented left-lateral displacements of Holocene and late

  2. Active fault database of Japan: Its construction and search system

    NASA Astrophysics Data System (ADS)

    Yoshioka, T.; Miyamoto, F.

    2011-12-01

    The Active fault database of Japan was constructed by the Active Fault and Earthquake Research Center, GSJ/AIST and opened to the public on the Internet from 2005 to make a probabilistic evaluation of the future faulting event and earthquake occurrence on major active faults in Japan. The database consists of three sub-database, 1) sub-database on individual site, which includes long-term slip data and paleoseismicity data with error range and reliability, 2) sub-database on details of paleoseismicity, which includes the excavated geological units and faulting event horizons with age-control, 3) sub-database on characteristics of behavioral segments, which includes the fault-length, long-term slip-rate, recurrence intervals, most-recent-event, slip per event and best-estimate of cascade earthquake. Major seismogenic faults, those are approximately the best-estimate segments of cascade earthquake, each has a length of 20 km or longer and slip-rate of 0.1m/ky or larger and is composed from about two behavioral segments in average, are included in the database. This database contains information of active faults in Japan, sorted by the concept of "behavioral segments" (McCalpin, 1996). Each fault is subdivided into 550 behavioral segments based on surface trace geometry and rupture history revealed by paleoseismic studies. Behavioral segments can be searched on the Google Maps. You can select one behavioral segment directly or search segments in a rectangle area on the map. The result of search is shown on a fixed map or the Google Maps with information of geologic and paleoseismic parameters including slip rate, slip per event, recurrence interval, and calculated rupture probability in the future. Behavioral segments can be searched also by name or combination of fault parameters. All those data are compiled from journal articles, theses, and other documents. We are currently developing a revised edition, which is based on an improved database system. More than ten

  3. Recently active traces of the Bartlett Springs Fault, California: a digital database

    USGS Publications Warehouse

    Lienkaemper, James J.

    2010-01-01

    The purpose of this map is to show the location of and evidence for recent movement on active fault traces within the Bartlett Springs Fault Zone, California. The location and recency of the mapped traces is primarily based on geomorphic expression of the fault as interpreted from large-scale aerial photography. In a few places, evidence of fault creep and offset Holocene strata in trenches and natural exposures have confirmed the activity of some of these traces. This publication is formatted both as a digital database for use within a geographic information system (GIS) and for broader public access as map images that may be browsed on-line or download a summary map. The report text describes the types of scientific observations used to make the map, gives references pertaining to the fault and the evidence of faulting, and provides guidance for use of and limitations of the map.

  4. Digital Database of Recently Active Traces of the Hayward Fault, California

    USGS Publications Warehouse

    Lienkaemper, James J.

    2006-01-01

    The purpose of this map is to show the location of and evidence for recent movement on active fault traces within the Hayward Fault Zone, California. The mapped traces represent the integration of the following three different types of data: (1) geomorphic expression, (2) creep (aseismic fault slip),and (3) trench exposures. This publication is a major revision of an earlier map (Lienkaemper, 1992), which both brings up to date the evidence for faulting and makes it available formatted both as a digital database for use within a geographic information system (GIS) and for broader public access interactively using widely available viewing software. The pamphlet describes in detail the types of scientific observations used to make the map, gives references pertaining to the fault and the evidence of faulting, and provides guidance for use of and limitations of the map. [Last revised Nov. 2008, a minor update for 2007 LiDAR and recent trench investigations; see version history below.

  5. Recently Active Traces of the Berryessa Fault, California: A Digital Database

    USGS Publications Warehouse

    Lienkaemper, James J.

    2012-01-01

    The purpose of this map is to show the location of and evidence for recent movement on active fault traces within the Berryessa section and parts of adjacent sections of the Green Valley Fault Zone, California. The location and recency of the mapped traces is primarily based on geomorphic expression of the fault as interpreted from large-scale 2010 aerial photography and from 2007 and 2011 0.5 and 1.0 meter bare-earth LiDAR imagery (that is, high-resolution topographic data). In a few places, evidence of fault creep and offset Holocene strata in trenches and natural exposures have confirmed the activity of some of these traces. This publication is formatted both as a digital database for use within a geographic information system (GIS) and for broader public access as map images that may be browsed on-line or download a summary map. The report text describes the types of scientific observations used to make the map, gives references pertaining to the fault and the evidence of faulting, and provides guidance for use of and limitations of the map.

  6. Earthquake Model of the Middle East (EMME) Project: Active Fault Database for the Middle East Region

    NASA Astrophysics Data System (ADS)

    Gülen, L.; Wp2 Team

    2010-12-01

    The Earthquake Model of the Middle East (EMME) Project is a regional project of the umbrella GEM (Global Earthquake Model) project (http://www.emme-gem.org/). EMME project region includes Turkey, Georgia, Armenia, Azerbaijan, Syria, Lebanon, Jordan, Iran, Pakistan, and Afghanistan. Both EMME and SHARE projects overlap and Turkey becomes a bridge connecting the two projects. The Middle East region is tectonically and seismically very active part of the Alpine-Himalayan orogenic belt. Many major earthquakes have occurred in this region over the years causing casualties in the millions. The EMME project will use PSHA approach and the existing source models will be revised or modified by the incorporation of newly acquired data. More importantly the most distinguishing aspect of the EMME project from the previous ones will be its dynamic character. This very important characteristic is accomplished by the design of a flexible and scalable database that will permit continuous update, refinement, and analysis. A digital active fault map of the Middle East region is under construction in ArcGIS format. We are developing a database of fault parameters for active faults that are capable of generating earthquakes above a threshold magnitude of Mw≥5.5. Similar to the WGCEP-2007 and UCERF-2 projects, the EMME project database includes information on the geometry and rates of movement of faults in a “Fault Section Database”. The “Fault Section” concept has a physical significance, in that if one or more fault parameters change, a new fault section is defined along a fault zone. So far over 3,000 Fault Sections have been defined and parameterized for the Middle East region. A separate “Paleo-Sites Database” includes information on the timing and amounts of fault displacement for major fault zones. A digital reference library that includes the pdf files of the relevant papers, reports is also being prepared. Another task of the WP-2 of the EMME project is to prepare

  7. 15 years of zooming in and zooming out: Developing a new single scale national active fault database of New Zealand

    NASA Astrophysics Data System (ADS)

    Ries, William; Langridge, Robert; Villamor, Pilar; Litchfield, Nicola; Van Dissen, Russ; Townsend, Dougal; Lee, Julie; Heron, David; Lukovic, Biljana

    2014-05-01

    In New Zealand, we are currently reconciling multiple digital coverages of mapped active faults into a national coverage at a single scale (1:250,000). This seems at first glance to be a relatively simple task. However, methods used to capture data, the scale of capture, and the initial purpose of the fault mapping, has produced datasets that have very different characteristics. The New Zealand digital active fault database (AFDB) was initially developed as a way of managing active fault locations and fault-related features within a computer-based spatial framework. The data contained within the AFDB comes from a wide range of studies, from plate tectonic (1:500,000) to cadastral (1:2,000) scale. The database was designed to allow capture of field observations and remotely sourced data without a loss in data resolution. This approach has worked well as a method for compiling a centralised database for fault information but not for providing a complete national coverage at a single scale. During the last 15 years other complementary projects have used and also contributed data to the AFDB, most notably the QMAP project (a national series of geological maps completed over 19 years that include coverage of active and inactive faults at 1:250,000). AFDB linework and attributes was incorporated into this series but simplification of linework and attributes has occurred to maintain map clarity at 1:250,000 scale. Also, during this period on-going mapping of active faults has improved upon these data. Other projects of note that have used data from the AFDB include the National Seismic Hazard Model of New Zealand and the Global Earthquake Model (GEM). The main goal of the current project has been to provide the best digital spatial representation of a fault trace at 1:250,000 scale and combine this with the most up to date attributes. In some areas this has required a simplification of very fine detailed data and in some cases new mapping to provide a complete coverage

  8. A Quaternary fault database for central Asia

    NASA Astrophysics Data System (ADS)

    Mohadjer, Solmaz; Ehlers, Todd Alan; Bendick, Rebecca; Stübner, Konstanze; Strube, Timo

    2016-02-01

    Earthquakes represent the highest risk in terms of potential loss of lives and economic damage for central Asian countries. Knowledge of fault location and behavior is essential in calculating and mapping seismic hazard. Previous efforts in compiling fault information for central Asia have generated a large amount of data that are published in limited-access journals with no digital maps publicly available, or are limited in their description of important fault parameters such as slip rates. This study builds on previous work by improving access to fault information through a web-based interactive map and an online database with search capabilities that allow users to organize data by different fields. The data presented in this compilation include fault location, its geographic, seismic, and structural characteristics, short descriptions, narrative comments, and references to peer-reviewed publications. The interactive map displays 1196 fault traces and 34 000 earthquake locations on a shaded-relief map. The online database contains attributes for 123 faults mentioned in the literature, with Quaternary and geodetic slip rates reported for 38 and 26 faults respectively, and earthquake history reported for 39 faults. All data are accessible for viewing and download via http://www.geo.uni-tuebingen.de/faults/. This work has implications for seismic hazard studies in central Asia as it summarizes important fault parameters, and can reduce earthquake risk by enhancing public access to information. It also allows scientists and hazard assessment teams to identify structures and regions where data gaps exist and future investigations are needed.

  9. A Quaternary Fault Database for Central Asia

    NASA Astrophysics Data System (ADS)

    Mohadjer, S.; Ehlers, T. A.; Bendick, R.; Stübner, K.; Strube, T.

    2015-09-01

    Earthquakes represent the highest risk in terms of potential loss of lives and economic damage for Central Asian countries. Knowledge of fault location and behavior is essential in calculating and mapping seismic hazard. Previous efforts in compiling fault information for Central Asia have generated a large amount of data that are published in limited-access journals with no digital maps publicly available, or are limited in their description of important fault parameters such as slip rates. This study builds on previous work by improving access to fault information through a web-based interactive map and an online database with search capabilities that allow users to organize data by different fields. The data presented in this compilation include fault location, its geographic, seismic and structural characteristics, short descriptions, narrative comments and references to peer-reviewed publications. The interactive map displays 1196 fault segments and 34 000 earthquake locations on a shaded-relief map. The online database contains attributes for 122 faults mentioned in the literature, with Quaternary and geodetic slip rates reported for 38 and 26 faults respectively, and earthquake history reported for 39 faults. This work has implications for seismic hazard studies in Central Asia as it summarizes important fault parameters, and can reduce earthquake risk by enhancing public access to information. It also allows scientists and hazard assessment teams to identify structures and regions where data gaps exist and future investigations are needed.

  10. Digital release of the Alaska Quaternary fault and fold database

    NASA Astrophysics Data System (ADS)

    Koehler, R. D.; Farrell, R.; Burns, P.; Combellick, R. A.; Weakland, J. R.

    2011-12-01

    The Alaska Division of Geological & Geophysical Surveys (DGGS) has designed a Quaternary fault and fold database for Alaska in conformance with standards defined by the U.S. Geological Survey for the National Quaternary fault and fold database. Alaska is the most seismically active region of the United States, however little information exists on the location, style of deformation, and slip rates of Quaternary faults. Thus, to provide an accurate, user-friendly, reference-based fault inventory to the public, we are producing a digital GIS shapefile of Quaternary fault traces and compiling summary information on each fault. Here, we present relevant information pertaining to the digital GIS shape file and online access and availability of the Alaska database. This database will be useful for engineering geologic studies, geologic, geodetic, and seismic research, and policy planning. The data will also contribute to the fault source database being constructed by the Global Earthquake Model (GEM), Faulted Earth project, which is developing tools to better assess earthquake risk. We derived the initial list of Quaternary active structures from The Neotectonic Map of Alaska (Plafker et al., 1994) and supplemented it with more recent data where available. Due to the limited level of knowledge on Quaternary faults in Alaska, pre-Quaternary fault traces from the Plafker map are shown as a layer in our digital database so users may view a more accurate distribution of mapped faults and to suggest the possibility that some older traces may be active yet un-studied. The database will be updated as new information is developed. We selected each fault by reviewing the literature and georegistered the faults from 1:250,000-scale paper maps contained in 1970's vintage and earlier bedrock maps. However, paper map scales range from 1:20,000 to 1:500,000. Fault parameters in our GIS fault attribute tables include fault name, age, slip rate, slip sense, dip direction, fault line type

  11. Active, capable, and potentially active faults - a paleoseismic perspective

    USGS Publications Warehouse

    Machette, M.N.

    2000-01-01

    Maps of faults (geologically defined source zones) may portray seismic hazards in a wide range of completeness depending on which types of faults are shown. Three fault terms - active, capable, and potential - are used in a variety of ways for different reasons or applications. Nevertheless, to be useful for seismic-hazards analysis, fault maps should encompass a time interval that includes several earthquake cycles. For example, if the common recurrence in an area is 20,000-50,000 years, then maps should include faults that are 50,000-100,000 years old (two to five typical earthquake cycles), thus allowing for temporal variability in slip rate and recurrence intervals. Conversely, in more active areas such as plate boundaries, maps showing faults that are <10,000 years old should include those with at least 2 to as many as 20 paleoearthquakes. For the International Lithosphere Programs' Task Group II-2 Project on Major Active Faults of the World our maps and database will show five age categories and four slip rate categories that allow one to select differing time spans and activity rates for seismic-hazard analysis depending on tectonic regime. The maps are accompanied by a database that describes evidence for Quaternary faulting, geomorphic expression, and paleoseismic parameters (slip rate, recurrence interval and time of most recent surface faulting). These maps and databases provide an inventory of faults that would be defined as active, capable, and potentially active for seismic-hazard assessments.

  12. Database and Map of Quaternary Faults and Folds in Peru and its Offshore Region

    USGS Publications Warehouse

    Machare, Jose; Fenton, Clark H.; Machette, Michael N.; Lavenu, Alain; Costa, Carlos; Dart, Richard L.

    2003-01-01

    This publication consists of a main map of Quaternary faults and fiolds of Peru, a table of Quaternary fault data, a region inset map showing relative plate motion, and a second inset map of an enlarged area of interest in southern Peru. These maps and data compilation show evidence for activity of Quaternary faults and folds in Peru and its offshore regions of the Pacific Ocean. The maps show the locations, ages, and activity rates of major earthquake-related features such as faults and fault-related folds. These data are accompanied by text databases that describe these features and document current information on their activity in the Quaternary.

  13. Data-based fault-tolerant control for affine nonlinear systems with actuator faults.

    PubMed

    Xie, Chun-Hua; Yang, Guang-Hong

    2016-09-01

    This paper investigates the fault-tolerant control (FTC) problem for unknown nonlinear systems with actuator faults including stuck, outage, bias and loss of effectiveness. The upper bounds of stuck faults, bias faults and loss of effectiveness faults are unknown. A new data-based FTC scheme is proposed. It consists of the online estimations of the bounds and a state-dependent function. The estimations are adjusted online to compensate automatically the actuator faults. The state-dependent function solved by using real system data helps to stabilize the system. Furthermore, all signals in the resulting closed-loop system are uniformly bounded and the states converge asymptotically to zero. Compared with the existing results, the proposed approach is data-based. Finally, two simulation examples are provided to show the effectiveness of the proposed approach. PMID:27180025

  14. The New ILP Database of Quaternary Faults and Folds in South America

    NASA Astrophysics Data System (ADS)

    Costa, C. H.; Cisneros, H. A.; Machette, M. N.; Dart, R. L.

    2003-12-01

    As part of the International Lithosphere Program's Task Group II-2, we have completed the compilation of Quaternary faults and folds in South America and have established an Internet website for this data. The underpinning maps and reports have been released as electronic U.S. Geological Survey Open-File Reports (pdfs, see poster). The maps show the location, time, sense of slip, and activity rate of major earthquake-related features such as faults and fault-related folds. The maps are accompanied by descriptions of their Quaternary activity. The primary elements of the 10-year project are supervision and interpretation of geologic/tectonic information (Costa and Machette), data compilation (project participants), database design and management (Cisneros), and GIS input and management (Dart). A dozen experts in Quaternary faulting, neotectonics, paleoseismology, and seismology compiled the data: questions about individual faults or additions to the database should be directed to them. Prior to this project, digital maps of Quaternary faults did not exist for any of the South America countries, even though understanding the extent and character of active and older Quaternary faults are critical elements of seismic-hazards analysis. These new data will help extend the relatively short record of instrumental and felt seismicity that is the primary parameter for current seismic-hazard assessments in South American countries. Although some fault data were available for most of the countries (i.e., Venezuela), the degree of completeness varies as a function of the remoteness and vegetation cover (i.e., Brazil). A few faults such as the Bocono have had detailed investigations involving modern paleoseismic techniques. Other faults have been studied in some detail, usually in association with concerns about hazards to urban areas or the safety of critical facilities such as mining operations, oil-and-gas pipelines, or power-generating facilities. However, the general state

  15. Packaged Fault Model for Geometric Segmentation of Active Faults Into Earthquake Source Faults

    NASA Astrophysics Data System (ADS)

    Nakata, T.; Kumamoto, T.

    2004-12-01

    In Japan, the empirical formula proposed by Matsuda (1975) mainly based on the length of the historical surface fault ruptures and magnitude, is generally applied to estimate the size of future earthquakes from the extent of existing active faults for seismic hazard assessment. Therefore validity of the active fault length and defining individual segment boundaries where propagating ruptures terminate are essential and crucial to the reliability for the accurate assessments. It is, however, not likely for us to clearly identify the behavioral earthquake segments from observation of surface faulting during the historical period, because most of the active faults have longer recurrence intervals than 1000 years in Japan. Besides uncertainties of the datasets obtained mainly from fault trenching studies are quite large for fault grouping/segmentation. This is why new methods or criteria should be applied for active fault grouping/segmentation, and one of the candidates may be geometric criterion of active faults. Matsuda (1990) used _gfive kilometer_h as a critical distance for grouping and separation of neighboring active faults. On the other hand, Nakata and Goto (1998) proposed the geometric criteria such as (1) branching features of active fault traces and (2) characteristic pattern of vertical-slip distribution along the fault traces as tools to predict rupture length of future earthquakes. The branching during the fault rupture propagation is regarded as an effective energy dissipation process and could result in final rupture termination. With respect to the characteristic pattern of vertical-slip distribution, especially with strike-slip components, the up-thrown sides along the faults are, in general, located on the fault blocks in the direction of relative strike-slip. Applying these new geometric criteria to the high-resolution active fault distribution maps, the fault grouping/segmentation could be more practically conducted. We tested this model

  16. Fault Segmentation and its Implication to the Evaluation of Future Earthquakes from Active Faults in Japan

    NASA Astrophysics Data System (ADS)

    Awata, Y.; Yoshioka, T.

    2005-12-01

    Segmentation of active faults is essential for the evaluation both of past and future faulting using geologic data from paleoseismological sites. A behavioral segment is defined as the smallest segment of fault having a characteristic history of faulting. More over, we have to estimate the earthquake segments that can be consist of multiple faulting along a system of behavioral segments. Active fault strands in Japan are segmented into behavioral segments based on fault discontinuity of 2-3 km and larger (Active Fault Res. Group, GSJ, 2000), large bend of fault strand and paleoseismicity. 431 behavioral segments, >= 10 km in length and >= 0.1 m/ky in long-term slip-rate, are identified from a database of active faults in Japan, that is constructed at AFRC, GSJ/AIST. The length of the segments is averaged 21 km and approximately 70 km in maximum. Only 8 segments are exceed 45 km in length. These lengths are very similar to those of historical surface ruptures not only in Japan since 1891 Nobi earthquake, but also in other regions having different tectonic setting. According to the scaling law between fault length and amount of displacement of behavioral segment, a maximum length of ca. 70 km can estimate a slip of ca. 14 m. This amount of slip is as large as world largest slip occurred during the 1931 Fuyun earthquake of M 8, 1999 Chichi earthquake of M 7.4 and the 2001 Central Kunlun earthquake of M 7.9 in East Asia. Recent geological and seismological studies on large earthquakes have revealed that multiple-rupturing is very common during large earthquakes. Therefore, evaluation of simultaneous faulting along a system of active faults is indispensable for the estimation of earthquake size. A Matsuda's (1990) idea of "seismogenic faults", that is divided or grouped based on the geometric discontinuity of 5 km, may useful for the best estimation of earthquake segment. The Japanese behavioral segments are grouped into "seismogenic faults", each consists of about 2

  17. Evolution of fault activity reflecting the crustal deformation: Insights from crustal stress and fault orientations in the northeast-southwest Japan

    NASA Astrophysics Data System (ADS)

    Miyakawa, A.; Otsubo, M.

    2015-12-01

    We evaluated fault activity in northeast- southwest Japan based on the regional stress and the fault orientation field for both active faults and inactive faults (here, an inactive fault is a fault which activity has not been identified in Quaternary). The regional stress field was calculated using the stress inversion method [Hardebeck and Michael, 2006] applied to earthquake focal mechanisms in the northeast-southwest Japan. The locations and orientations (i.e., strike and dip, assuming a planar fault geometry) of active faults in the study area were obtained from the Active Fault Database of Japan and inactive faults from a database compiled by Kosaka et al. [2011]. We employed slip tendency analysis [Morris et al., 1996] to evaluate the likelihood of fault slip. The values of the slip tendency is generally higher along active faults than along inactive faults. The difference between the slip tendencies of active and inactive faults reflects the difference in their activities. Furthermore the high slip tendency observed for some inactive faults suggests their high activity. These high slip tendencies imply that they have potential to be active. We propose the temporal evolution from inactive to active faulting during long-term crustal deformation to explain the potential for fault activity along inactive faults. When a region undergoes the transition from inactive to active faulting, potential active faults are observed as inactive faults with a high Part of this findig have been submitted to Tectonics (AGU Journal) (2015-07-27). We will presentate some new findings.slip tendency. The average slip tendency of inactive faults gradually increases from northeast to southwest Japan, because a relatively large number of inactive faults in southwest Japan have a high slip tendency. The representative deformation zones in Japan shows a relationship with the observed spatial variations in the evolution from inactive to active faulting. This study was supported by MEXT

  18. Map and Database of Probable and Possible Quaternary Faults in Afghanistan

    USGS Publications Warehouse

    Ruleman, C.A.; Crone, A.J.; Machette, M.N.; Haller, K.M.; Rukstales, K.S.

    2007-01-01

    The U.S. Geological Survey (USGS) with support from the U.S. Agency for International Development (USAID) mission in Afghanistan, has prepared a digital map showing the distribution of probable and suspected Quaternary faults in Afghanistan. This map is a key component of a broader effort to assess and map the country's seismic hazards. Our analyses of remote-sensing imagery reveal a complex array of tectonic features that we interpret to be probable and possible active faults within the country and in the surrounding border region. In our compilation, we have mapped previously recognized active faults in greater detail, and have categorized individual features based on their geomorphic expression. We assigned mapped features to eight newly defined domains, each of which contains features that appear to have similar styles of deformation. The styles of deformation associated with each domain provide insight into the kinematics of the modern tectonism, and define a tectonic framework that helps constrain deformational models of the Alpine-Himalayan orogenic belt. The modern fault movements, deformation, and earthquakes in Afghanistan are driven by the collision between the northward-moving Indian subcontinent and Eurasia. The patterns of probable and possible Quaternary faults generally show that much of the modern tectonic activity is related to transfer of plate-boundary deformation across the country. The left-lateral, strike-slip Chaman fault in southeastern Afghanistan probably has the highest slip rate of any fault in the country; to the north, this slip is distributed onto several fault systems. At the southern margin of the Kabul block, the style of faulting changes from mainly strike-slip motion associated with the boundary between the Indian and Eurasian plates, to transpressional and transtensional faulting. North and northeast of the Kabul block, we recognized a complex pattern of potentially active strike-slip, thrust, and normal faults that form a

  19. Active Fault Characterization in the Urban Area of Vienna

    NASA Astrophysics Data System (ADS)

    Decker, Kurt; Grupe, Sabine; Hintersberger, Esther

    2016-04-01

    The identification of active faults that lie beneath a city is of key importance for seismic hazard assessment. Fault mapping and characterization in built-up areas with strong anthropogenic overprint is, however, a challenging task. Our study of Quaternary faults in the city of Vienna starts from the re-assessment of a borehole database of the municipality containing several tens of thousands of shallow boreholes. Data provide tight constraints on the geometry of Quaternary deposits and highlight several locations with fault-delimited Middle to Late Pleistocene terrace sediments of the Danube River. Additional information is obtained from geological descriptions of historical outcrops which partly date back to about 1900. The latter were found to be particularly valuable by providing unprejudiced descriptions of Quaternary faults, sometimes with stunning detail. The along-strike continuations of some of the identified faults are further imaged by industrial 2D/3D seismic acquired outside the city limits. The interpretation and the assessment of faults identified within the city benefit from a very well constrained tectonic model of the active Vienna Basin fault system which derived from data obtained outside the city limits. This data suggests that the urban faults are part of a system of normal faults compensating fault-normal extension at a releasing bend of the sinistral Vienna Basin Transfer Fault. Slip rates estimated for the faults in the city are in the range of several hundredths of millimetres per year and match the slip rates of normal faults that were trenched outside the city. The lengths/areas of individual faults estimated from maps and seismic reach up to almost 700 km² suggesting that all of the identified faults are capable of producing earthquakes with magnitudes M>6, some with magnitudes up to M~6.7.

  20. Principal fault zone width and permeability of the active Neodani fault, Nobi fault system, Southwest Japan

    NASA Astrophysics Data System (ADS)

    Tsutsumi, A.; Nishino, S.; Mizoguchi, K.; Hirose, T.; Uehara, S.; Sato, K.; Tanikawa, W.; Shimamoto, T.

    2004-02-01

    The internal structure and permeability of the Neodani fault, which was last activated at the time of the 1891 Nobi earthquake (M8.0), were examined through field survey and experiments. A new exposure of the fault at a road construction site reveals a highly localized feature of the past fault deformation within a narrow fault core zone. The fault of the area consists of three zone units towards the fault core: (a) protolith rocks; (b) 15 to 30 m of fault breccia, and (c) 200 mm green to black fault gouge. Within the fault breccia zone, cataclastic foliation oblique to the fault has developed in a fine-grained 2-m-wide zone adjacent to the fault. Foliation is defined by subparallel alignment of intact lozenge shaped clasts, or by elongated aggregates of fine-grained chert fragments. The mean angle of 20°, between the foliation and the fault plane suggests that the foliated breccia accommodated a shear strain of γ<5 assuming simple shear for the rotation of the cataclastic foliation. Previous trench surveys have revealed that the fault has undergone at least 70 m of fault displacement within the last 20,000 years in this locality. The observed fault geometry suggests that past fault displacements have been localized into the 200-mm-wide gouge zone. Gas permeability analysis of the gouges gives low values of the order of 10 -20 m 2. Water permeability as low as 10 -20 m 2 is therefore expected for the fault gouge zone, which is two orders of magnitude lower than the critical permeability suggested for a fault to cause thermal pressurization during a fault slip.

  1. The property of fault zone and fault activity of Shionohira Fault, Fukushima, Japan

    NASA Astrophysics Data System (ADS)

    Seshimo, K.; Aoki, K.; Tanaka, Y.; Niwa, M.; Kametaka, M.; Sakai, T.; Tanaka, Y.

    2015-12-01

    The April 11, 2011 Fukushima-ken Hamadori Earthquake (hereafter the 4.11 earthquake) formed co-seismic surface ruptures trending in the NNW-SSE direction in Iwaki City, Fukushima Prefecture, which were newly named as the Shionohira Fault by Ishiyama et al. (2011). This earthquake was characterized by a westward dipping normal slip faulting, with a maximum displacement of about 2 m (e.g., Kurosawa et al., 2012). To the south of the area, the same trending lineaments were recognized to exist even though no surface ruptures occurred by the earthquake. In an attempt to elucidate the differences of active and non-active segments of the fault, this report discusses the results of observation of fault outcrops along the Shionohira Fault as well as the Coulomb stress calculations. Only a few outcrops have basement rocks of both the hanging-wall and foot-wall of the fault plane. Three of these outcrops (Kyodo-gawa, Shionohira and Betto) were selected for investigation. In addition, a fault outcrop (Nameishi-minami) located about 300 m south of the southern tip of the surface ruptures was investigated. The authors carried out observations of outcrops, polished slabs and thin sections, and performed X-ray diffraction (XRD) to fault materials. As a result, the fault zones originating from schists were investigated at Kyodo-gawa and Betto. A thick fault gouge was cut by a fault plane of the 4.11 earthquake in each outcrop. The fault materials originating from schists were fault bounded with (possibly Neogene) weakly deformed sandstone at Shionohira. A thin fault gouge was found along the fault plane of 4.11 earthquake. A small-scale fault zone with thin fault gouge was observed in Nameishi-minami. According to XRD analysis, smectite was detected in the gouges from Kyodo-gawa, Shionohira and Betto, while not in the gouge from Nameishi-minami.

  2. Challenges and perspectives in the geological study of active faults.

    NASA Astrophysics Data System (ADS)

    Rizza, M.

    2011-12-01

    Identification of active faults is important for understanding regional seismicity and seismic hazard. A large part of the world's population lives in areas where destructive earthquakes or tsunamis were recorded in the past. Most of the difficulties in estimating seismic hazard and anticipating earthquakes are due to a lack of knowledge about the location of active faults and their seismic history. Even where active faults are known the characteristics of past earthquakes and the seismic cycle are uncertain and subject to discussion. Investigations carried out on active faults during the past decade, however, have provided new high-quality data and powerful tools to better understand crustal deformation and the recurrence of earthquakes. In morphotectonic studies, the ever-improving resolution of satellites images allows geologists to identify with more certainty the traces of active faults and even earthquake surface ruptures of the past. The advantage of satellite imagery for identifying neotectonic features is it gives access to large areas, sometimes difficult to reach in the field and provides synoptic views. Using the potential of high-resolution imagery and digital elevation models, geologists can produce detailed 3D reconstructions of fault morphology and geometry, including the kinematics of repeated slip. The development of new dating techniques, coupled with paleoseismology and quantitative geomorphology, now allows bracketing the occurrence of paleoearthquakes back to several thousand years, as well as analyzing long time sequences of events. Despite such wealth of new data, however, the work remaining to do is huge. Earthquake forecast (location, timing, magnitude) remains an unsolved problem for the earthquake community at large (seismologists, geodesists, paleoseismologists and modelers). The most important challenges in the next decade will be to increase the efficiency of neotectonic studies to create more complete active fault databases and

  3. Development of the Global Earthquake Model’s neotectonic fault database

    USGS Publications Warehouse

    Christophersen, Annemarie; Litchfield, Nicola; Berryman, Kelvin; Thomas, Richard; Basili, Roberto; Wallace, Laura; Ries, William; Hayes, Gavin P.; Haller, Kathleen M.; Yoshioka, Toshikazu; Koehler, Richard D.; Clark, Dan; Wolfson-Schwehr, Monica; Boettcher, Margaret S.; Villamor, Pilar; Horspool, Nick; Ornthammarath, Teraphan; Zuñiga, Ramon; Langridge, Robert M.; Stirling, Mark W.; Goded, Tatiana; Costa, Carlos; Yeats, Robert

    2015-01-01

    The Global Earthquake Model (GEM) aims to develop uniform, openly available, standards, datasets and tools for worldwide seismic risk assessment through global collaboration, transparent communication and adapting state-of-the-art science. GEM Faulted Earth (GFE) is one of GEM’s global hazard module projects. This paper describes GFE’s development of a modern neotectonic fault database and a unique graphical interface for the compilation of new fault data. A key design principle is that of an electronic field notebook for capturing observations a geologist would make about a fault. The database is designed to accommodate abundant as well as sparse fault observations. It features two layers, one for capturing neotectonic faults and fold observations, and the other to calculate potential earthquake fault sources from the observations. In order to test the flexibility of the database structure and to start a global compilation, five preexisting databases have been uploaded to the first layer and two to the second. In addition, the GFE project has characterised the world’s approximately 55,000 km of subduction interfaces in a globally consistent manner as a basis for generating earthquake event sets for inclusion in earthquake hazard and risk modelling. Following the subduction interface fault schema and including the trace attributes of the GFE database schema, the 2500-km-long frontal thrust fault system of the Himalaya has also been characterised. We propose the database structure to be used widely, so that neotectonic fault data can make a more complete and beneficial contribution to seismic hazard and risk characterisation globally.

  4. Reliability database development for use with an object-oriented fault tree evaluation program

    NASA Technical Reports Server (NTRS)

    Heger, A. Sharif; Harringtton, Robert J.; Koen, Billy V.; Patterson-Hine, F. Ann

    1989-01-01

    A description is given of the development of a fault-tree analysis method using object-oriented programming. In addition, the authors discuss the programs that have been developed or are under development to connect a fault-tree analysis routine to a reliability database. To assess the performance of the routines, a relational database simulating one of the nuclear power industry databases has been constructed. For a realistic assessment of the results of this project, the use of one of existing nuclear power reliability databases is planned.

  5. Fleet-Wide Prognostic and Health Management Suite: Asset Fault Signature Database

    SciTech Connect

    Vivek Agarwal; Nancy J. Lybeck; Randall Bickford; Richard Rusaw

    2015-06-01

    Proactive online monitoring in the nuclear industry is being explored using the Electric Power Research Institute’s Fleet-Wide Prognostic and Health Management (FW-PHM) Suite software. The FW-PHM Suite is a set of web-based diagnostic and prognostic tools and databases that serves as an integrated health monitoring architecture. The FW-PHM Suite has four main modules: (1) Diagnostic Advisor, (2) Asset Fault Signature (AFS) Database, (3) Remaining Useful Life Advisor, and (4) Remaining Useful Life Database. The paper focuses on the AFS Database of the FW-PHM Suite, which is used to catalog asset fault signatures. A fault signature is a structured representation of the information that an expert would use to first detect and then verify the occurrence of a specific type of fault. The fault signatures developed to assess the health status of generator step-up transformers are described in the paper. The developed fault signatures capture this knowledge and implement it in a standardized approach, thereby streamlining the diagnostic and prognostic process. This will support the automation of proactive online monitoring techniques in nuclear power plants to diagnose incipient faults, perform proactive maintenance, and estimate the remaining useful life of assets.

  6. Colorado Late Cenozoic Fault and Fold Database and Internet Map Server: User-friendly technology for complex information

    USGS Publications Warehouse

    Morgan, K.S.; Pattyn, G.J.; Morgan, M.L.

    2005-01-01

    Internet mapping applications for geologic data allow simultaneous data delivery and collection, enabling quick data modification while efficiently supplying the end user with information. Utilizing Web-based technologies, the Colorado Geological Survey's Colorado Late Cenozoic Fault and Fold Database was transformed from a monothematic, nonspatial Microsoft Access database into a complex information set incorporating multiple data sources. The resulting user-friendly format supports easy analysis and browsing. The core of the application is the Microsoft Access database, which contains information compiled from available literature about faults and folds that are known or suspected to have moved during the late Cenozoic. The database contains nonspatial fields such as structure type, age, and rate of movement. Geographic locations of the fault and fold traces were compiled from previous studies at 1:250,000 scale to form a spatial database containing information such as length and strike. Integration of the two databases allowed both spatial and nonspatial information to be presented on the Internet as a single dataset (http://geosurvey.state.co.us/pubs/ceno/). The user-friendly interface enables users to view and query the data in an integrated manner, thus providing multiple ways to locate desired information. Retaining the digital data format also allows continuous data updating and quick delivery of newly acquired information. This dataset is a valuable resource to anyone interested in earthquake hazards and the activity of faults and folds in Colorado. Additional geologic hazard layers and imagery may aid in decision support and hazard evaluation. The up-to-date and customizable maps are invaluable tools for researchers or the public.

  7. InSAR measurements around active faults: creeping Philippine Fault and un-creeping Alpine Fault

    NASA Astrophysics Data System (ADS)

    Fukushima, Y.

    2013-12-01

    Recently, interferometric synthetic aperture radar (InSAR) time-series analyses have been frequently applied to measure the time-series of small and quasi-steady displacements in wide areas. Large efforts in the methodological developments have been made to pursue higher temporal and spatial resolutions by using frequently acquired SAR images and detecting more pixels that exhibit phase stability. While such a high resolution is indispensable for tracking displacements of man-made and other small-scale structures, it is not necessarily needed and can be unnecessarily computer-intensive for measuring the crustal deformation associated with active faults and volcanic activities. I apply a simple and efficient method to measure the deformation around the Alpine Fault in the South Island of New Zealand, and the Philippine Fault in the Leyte Island. I use a small-baseline subset (SBAS) analysis approach (Berardino, et al., 2002). Generally, the more we average the pixel values, the more coherent the signals are. Considering that, for the deformation around active faults, the spatial resolution can be as coarse as a few hundred meters, we can severely 'multi-look' the interferograms. The two applied cases in this study benefited from this approach; I could obtain the mean velocity maps on practically the entire area without discarding decorrelated areas. The signals could have been only partially obtained by standard persistent scatterer or single-look small-baseline approaches that are much more computer-intensive. In order to further increase the signal detection capability, it is sometimes effective to introduce a processing algorithm adapted to the signal of interest. In an InSAR time-series processing, one usually needs to set the reference point because interferograms are all relative measurements. It is difficult, however, to fix the reference point when one aims to measure long-wavelength deformation signals that span the whole analysis area. This problem can be

  8. Deformation Monitoring of AN Active Fault

    NASA Astrophysics Data System (ADS)

    Ostapchuk, A.

    2015-12-01

    The discovery of low frequency earthquakes, slow slip events and other deformation phenomena, new for geophysics, change our understanding of how the energy accumulated in the Earth's crust do release. The new geophysical data make one revise the underlying mechanism of geomechanical processes taking place in fault zones. Conditions for generating different slip modes are still unclear. The most vital question is whether a certain slip mode is intrinsic for a fault or may be controlled by external factors. This work presents the results of two and a half year deformation monitoring of a discontinuity in the zone of the Main Sayanskiy Fault. Main Sayanskiy Fault is right-lateral strike-slip fault. Observations were performed in the tunnel of Talaya seismic station (TLY), Irkutsk region, Russia. Measurements were carried out 70 m away from the entrance of the tunnel, the thickness of overlying rock was about 30 m. Inductive sensors of displacement were mounted at the both sides of a discontinuity, which recorded three components of relative fault side displacement with the accuracy of 0.2 mcm. Temperature variation inside the tunnel didn't exceed 0.5oC during the all period of observations. Important information about deformation properties of an active fault was obtained. A pronounced seasonality of deformation characteristics of discontinuity is observed in the investigated segment of rock. A great number of slow slip events with durations from several hours to several weeks were registered. Besides that alterations of fault deformation characteristics before the megathrust earthquake M9.0 Tohoku Oki 11 March 2011 and reaction to the event itself were detected. The work was supported by the Russian Science Foundation (grant no. 14-17-00719).

  9. Active faults in the Kashmir Valley

    NASA Astrophysics Data System (ADS)

    Shah, A.

    2012-04-01

    The risk of earthquake is ever increasing in mountains along with rapid growth of population and urbanization. Over half a million people died in the last decade due to earthquakes. The devastations of Sumatra and Thai coasts in 2004, of Kashmir and New Orleans in 2005, of SW Java in 2006, of Sumatra again in 2007, W Sichuan and Myanmar in 2008, of Haiti in 2010, Japan, New Zealand and Turkey in 2011, brought enormous damage. The primary step in this regard could be to establish an earthquake risk model. The Kashmir valley is a NW-SE trending oval-shaped inter-mountain basin. A number of low magnitude earthquakes have recently been reported from the border and few inside the Kashmir valley. A number of active reverse faults were identified in this valley using remote sensing images and active geomorphic features. NE dipping reverse faults uplifted the young alluvial fan at the SW side. An active tectonic environment has been created by these reverse faults; sediment filled streams at NE, and uplifted quaternary deposits at SW. These resulted in an overall tilting of the entire Kashmir valley towards NE. Dating of displaced deposits is required to estimate the total convergence along these faults. Broadly, these faults are because of the convergence of Indian plate beneath the Eurasian plate.

  10. Quaternary Geology and Surface Faulting Hazard: Active and Capable Faults in Central Apennines, Italy

    NASA Astrophysics Data System (ADS)

    Falcucci, E.; Gori, S.

    2015-12-01

    The 2009 L'Aquila earthquake (Mw 6.1), in central Italy, raised the issue of surface faulting hazard in Italy, since large urban areas were affected by surface displacement along the causative structure, the Paganica fault. Since then, guidelines for microzonation were drew up that take into consideration the problem of surface faulting in Italy, and laying the bases for future regulations about related hazard, similarly to other countries (e.g. USA). More specific guidelines on the management of areas affected by active and capable faults (i.e. able to produce surface faulting) are going to be released by National Department of Civil Protection; these would define zonation of areas affected by active and capable faults, with prescriptions for land use planning. As such, the guidelines arise the problem of the time interval and general operational criteria to asses fault capability for the Italian territory. As for the chronology, the review of the international literature and regulatory allowed Galadini et al. (2012) to propose different time intervals depending on the ongoing tectonic regime - compressive or extensional - which encompass the Quaternary. As for the operational criteria, the detailed analysis of the large amount of works dealing with active faulting in Italy shows that investigations exclusively based on surface morphological features (e.g. fault planes exposition) or on indirect investigations (geophysical data), are not sufficient or even unreliable to define the presence of an active and capable fault; instead, more accurate geological information on the Quaternary space-time evolution of the areas affected by such tectonic structures is needed. A test area for which active and capable faults can be first mapped based on such a classical but still effective methodological approach can be the central Apennines. Reference Galadini F., Falcucci E., Galli P., Giaccio B., Gori S., Messina P., Moro M., Saroli M., Scardia G., Sposato A. (2012). Time

  11. Fault zone structure and inferences on past activities of the active Shanchiao Fault in the Taipei metropolis, northern Taiwan

    NASA Astrophysics Data System (ADS)

    Chen, C.; Lee, J.; Chan, Y.; Lu, C.

    2010-12-01

    The Taipei Metropolis, home to around 10 million people, is subject to seismic hazard originated from not only distant faults or sources scattered throughout the Taiwan region, but also active fault lain directly underneath. Northern Taiwan including the Taipei region is currently affected by post-orogenic (Penglai arc-continent collision) processes related to backarc extension of the Ryukyu subduction system. The Shanchiao Fault, an active normal fault outcropping along the western boundary of the Taipei Basin and dipping to the east, is investigated here for its subsurface structure and activities. Boreholes records in the central portion of the fault were analyzed to document the stacking of post- Last Glacial Maximum growth sediments, and a tulip flower structure is illuminated with averaged vertical slip rate of about 3 mm/yr. Similar fault zone architecture and post-LGM tectonic subsidence rate is also found in the northern portion of the fault. A correlation between geomorphology and structural geology in the Shanchiao Fault zone demonstrates an array of subtle geomorphic scarps corresponds to the branch fault while the surface trace of the main fault seems to be completely erased by erosion and sedimentation. Such constraints and knowledge are crucial in earthquake hazard evaluation and mitigation in the Taipei Metropolis, and in understanding the kinematics of transtensional tectonics in northern Taiwan. Schematic 3D diagram of the fault zone in the central portion of the Shanchiao Fault, displaying regional subsurface geology and its relation to topographic features.

  12. Data-based hybrid tension estimation and fault diagnosis of cold rolling continuous annealing processes.

    PubMed

    Liu, Qiang; Chai, Tianyou; Wang, Hong; Qin, Si-Zhao Joe

    2011-12-01

    The continuous annealing process line (CAPL) of cold rolling is an important unit to improve the mechanical properties of steel strips in steel making. In continuous annealing processes, strip tension is an important factor, which indicates whether the line operates steadily. Abnormal tension profile distribution along the production line can lead to strip break and roll slippage. Therefore, it is essential to estimate the whole tension profile in order to prevent the occurrence of faults. However, in real annealing processes, only a limited number of strip tension sensors are installed along the machine direction. Since the effects of strip temperature, gas flow, bearing friction, strip inertia, and roll eccentricity can lead to nonlinear tension dynamics, it is difficult to apply the first-principles induced model to estimate the tension profile distribution. In this paper, a novel data-based hybrid tension estimation and fault diagnosis method is proposed to estimate the unmeasured tension between two neighboring rolls. The main model is established by an observer-based method using a limited number of measured tensions, speeds, and currents of each roll, where the tension error compensation model is designed by applying neural networks principal component regression. The corresponding tension fault diagnosis method is designed using the estimated tensions. Finally, the proposed tension estimation and fault diagnosis method was applied to a real CAPL in a steel-making company, demonstrating the effectiveness of the proposed method.

  13. Illuminating Northern California’s Active Faults

    USGS Publications Warehouse

    Prentice, Carol S.; Crosby, Christopher J.; Whitehill, Caroline S.; Arrowsmith, J. Ramon; Furlong, Kevin P.; Philips, David A.

    2009-01-01

    Newly acquired light detection and ranging (lidar) topographic data provide a powerful community resource for the study of landforms associated with the plate boundary faults of northern California (Figure 1). In the spring of 2007, GeoEarthScope, a component of the EarthScope Facility construction project funded by the U.S. National Science Foundation, acquired approximately 2000 square kilometers of airborne lidar topographic data along major active fault zones of northern California. These data are now freely available in point cloud (x, y, z coordinate data for every laser return), digital elevation model (DEM), and KMZ (zipped Keyhole Markup Language, for use in Google EarthTM and other similar software) formats through the GEON OpenTopography Portal (http://www.OpenTopography.org/data). Importantly, vegetation can be digitally removed from lidar data, producing high-resolution images (0.5- or 1.0-meter DEMs) of the ground surface beneath forested regions that reveal landforms typically obscured by vegetation canopy (Figure 2)

  14. A review of recently active faults in Taiwan

    USGS Publications Warehouse

    Bonilla, Manuel G.

    1975-01-01

    Six faults associated with five large earthquakes produced surface displacements ranging from 1 to 3 m in the period 1906 through 1951. Four of the ruptures occurred in the western coastal plain and foothills, and two occurred in the Longitudinal Valley of eastern Taiwan. Maps are included showing the locations and dimensions of the displacements. The published geological literature probably would not lead one to infer the existence of a fault along most of the 1906 rupture, except for descriptions of the rupture itself. Over most of its length the 1935 rupture on the Chihhu fault is parallel to but more than 0.5 km from nearby faults shown on geologic maps published in 1969 and 1971; only about 1.5 km of its 15 km length coincides with a mapped fault. The coastal plain part of the Tuntzuchio fault which ruptured in 1935 is apparently not revealed by landforms, and only suggested by other data. Part of the 1946 Hsinhua faulting coincides with a fault identified in the subsurface by seismic work but surface indications of the fault are obscure. The 1951 Meilun faulting occurred along a conspicuous pre-1951 scarp and the 1951 Yuli faulting occurred near or in line with pre-1951 scarps. More than 40 faults which, according to the published literature, have had Pleistocene or later movement are shown on a small-scale map. Most of these faults are in the densely-populated western part of Taiwan. The map and text calls attention to faults that may be active and therefore may be significant in planning important structures. Equivocal evidence suggestive of fault creep was found on the Yuli fault and the Hsinhua fault. Fault creep was not found at several places examined along the 1906 fault trace. Tectonic uplift has occurred in Taiwan in the last 10,000 years and application of eustatic sea level curves to published radiocarbon dates shows that the minimum rate of uplift is considerably different in different parts of the island. Incomplete data indicate that the rate is

  15. Active faults of the Baikal depression

    USGS Publications Warehouse

    Levi, K.G.; Miroshnichenko, A.I.; San'kov, V. A.; Babushkin, S.M.; Larkin, G.V.; Badardinov, A.A.; Wong, H.K.; Colman, S.; Delvaux, D.

    1997-01-01

    The Baikal depression occupies a central position in the system of the basins of the Baikal Rift Zone and corresponds to the nucleus from which the continental lithosphere began to open. For different reasons, the internal structure of the Lake Baikal basin remained unknown for a long time. In this article, we present for the first time a synthesis of the data concerning the structure of the sedimentary section beneath Lake Baikal, which were obtained by complex seismic and structural investigations, conducted mainly from 1989 to 1992. We make a brief description of the most interesting seismic profiles which provide a rough idea of a sedimentary unit structure, present a detailed structural interpretation and show the relationship between active faults in the lake, heat flow anomalies and recent hydrothermalism.

  16. Database activities at Brookhaven National Laboratory

    SciTech Connect

    Trahern, C.G.

    1995-12-01

    Brookhaven National Laboratory is a multi-disciplinary lab in the DOE system of research laboratories. Database activities are correspondingly diverse within the restrictions imposed by the dominant relational database paradigm. The authors discuss related activities and tools used in RHIC and in the other major projects at BNL. The others are the Protein Data Bank being maintained by the Chemistry department, and a Geographical Information System (GIS)--a Superfund sponsored environmental monitoring project under development in the Office of Environmental Restoration.

  17. Active oblique ramp faulting in the Southern Tunisian Atlas

    NASA Astrophysics Data System (ADS)

    Saïd, Aymen; Chardon, Dominique; Baby, Patrice; Ouali, Jamel

    2011-03-01

    The Gafsa fault is the longest and most active structure of the fold-and-thrust belt achieving southeastward propagation of the Atlas belt of Eastern North Africa onto the Saharan platform. The Gafsa fault is a 75-km long dextral-oblique basement fault ramp that poses a sizable challenge in earthquake hazard assessment because the post-Paleozoic sedimentary cover is decoupled from its basement above the basement fault. In this study, we combine seismic lines interpretation, tectonic geomorphology and paleoseismological investigations to assess the level of seismic hazard of this fault and evaluate its role in the geodynamic framework of the Central Mediterranean. We show that despite a moderate instrumental and historical seismicity, the fault has produced M ≥ 6 earthquakes with a return period of ca. 500-5000 years during the Late Quaternary. The latest large event having produced a surface rupture on the fault occurred around 8000 yr BP, suggesting an M ≥ 6 earthquake is overdue on the fault. The fault has a minimum reverse component of slip rate of 0.21-0.34 mm/yr over the past 50 Ka. The occurrence of M ≥ 7 paleoearthquakes on the fault may be suspected but not established. Such very strong earthquakes would require transient coseismic linkage of the buried basement fault with the overlying listric fault ramping off the décollement layer. The level of seismic hazard may be underestimated on the Gafsa fault. Indeed, given the geometry of the basement-cover fault system, a number of earthquakes generated in the basement would have led to coseismic surface folding instead of to surface rupture. The Gafsa fault is a major structure accommodating eastward extrusion / spreading of the Atlas belt onto the Saharan and Pelagian plateforms above the retreating Ionian lithospheric slab.

  18. Faulting processes in active faults - Evidences from TCDP and SAFOD drill core samples

    SciTech Connect

    Janssen, C.; Wirth, R.; Wenk, H. -R.; Morales, L.; Naumann, R.; Kienast, M.; Song, S. -R.; Dresen, G.

    2014-08-20

    The microstructures, mineralogy and chemistry of representative samples collected from the cores of the San Andreas Fault drill hole (SAFOD) and the Taiwan Chelungpu-Fault Drilling project (TCDP) have been studied using optical microscopy, TEM, SEM, XRD and XRF analyses. SAFOD samples provide a transect across undeformed host rock, the fault damage zone and currently active deforming zones of the San Andreas Fault. TCDP samples are retrieved from the principal slip zone (PSZ) and from the surrounding damage zone of the Chelungpu Fault. Substantial differences exist in the clay mineralogy of SAFOD and TCDP fault gouge samples. Amorphous material has been observed in SAFOD as well as TCDP samples. In line with previous publications, we propose that melt, observed in TCDP black gouge samples, was produced by seismic slip (melt origin) whereas amorphous material in SAFOD samples was formed by comminution of grains (crush origin) rather than by melting. Dauphiné twins in quartz grains of SAFOD and TCDP samples may indicate high seismic stress. The differences in the crystallographic preferred orientation of calcite between SAFOD and TCDP samples are significant. Microstructures resulting from dissolution–precipitation processes were observed in both faults but are more frequently found in SAFOD samples than in TCDP fault rocks. As already described for many other fault zones clay-gouge fabrics are quite weak in SAFOD and TCDP samples. Clay-clast aggregates (CCAs), proposed to indicate frictional heating and thermal pressurization, occur in material taken from the PSZ of the Chelungpu Fault, as well as within and outside of the SAFOD deforming zones, indicating that these microstructures were formed over a wide range of slip rates.

  19. Active Faults and Seismic Sources of the Middle East Region: Earthquake Model of the Middle East (EMME) Project

    NASA Astrophysics Data System (ADS)

    Gulen, L.; EMME WP2 Team*

    2011-12-01

    The Earthquake Model of the Middle East (EMME) Project is a regional project of the GEM (Global Earthquake Model) project (http://www.emme-gem.org/). The EMME project covers Turkey, Georgia, Armenia, Azerbaijan, Syria, Lebanon, Jordan, Iran, Pakistan, and Afghanistan. Both EMME and SHARE projects overlap and Turkey becomes a bridge connecting the two projects. The Middle East region is tectonically and seismically very active part of the Alpine-Himalayan orogenic belt. Many major earthquakes have occurred in this region over the years causing casualties in the millions. The EMME project consists of three main modules: hazard, risk, and socio-economic modules. The EMME project uses PSHA approach for earthquake hazard and the existing source models have been revised or modified by the incorporation of newly acquired data. The most distinguishing aspect of the EMME project from the previous ones is its dynamic character. This very important characteristic is accomplished by the design of a flexible and scalable database that permits continuous update, refinement, and analysis. An up-to-date earthquake catalog of the Middle East region has been prepared and declustered by the WP1 team. EMME WP2 team has prepared a digital active fault map of the Middle East region in ArcGIS format. We have constructed a database of fault parameters for active faults that are capable of generating earthquakes above a threshold magnitude of Mw≥5.5. The EMME project database includes information on the geometry and rates of movement of faults in a "Fault Section Database", which contains 36 entries for each fault section. The "Fault Section" concept has a physical significance, in that if one or more fault parameters change, a new fault section is defined along a fault zone. So far 6,991 Fault Sections have been defined and 83,402 km of faults are fully parameterized in the Middle East region. A separate "Paleo-Sites Database" includes information on the timing and amounts of fault

  20. Detecting Taiwan's Shanchiao Active Fault Using AMT and Gravity Methods

    NASA Astrophysics Data System (ADS)

    Liu, H.-C.; Yang, C.-H.

    2009-04-01

    Taiwan's Shanchiao normal fault runs in a northeast-southwest direction and is located on the western edge of the Taipei Basin in northern Taiwan. The overburden of the fault is late Quaternary sediment with a thickness of approximately a few tenth of a meter to several hundred meters. No detailed studies of the western side of the Shanchiao fault are available. As Taiwan is located on the Neotectonic Belt in the western Pacific, detecting active faults near the Taipei metropolitan area will provide necessary information for further disaster prevention. It is the responsibility of geologists and geophysicists in Taiwan to perform this task. Examination of the resistivity and density contrasts of subsurface layers permits a mapping of the Shanchiao fault and the deformed Tertiary strata of the Taipei Basin. The audio-frequency magnetotelluric (AMT) method and gravity method were chosen for this study. Significant resistivity and gravity anomalies were observed in the suspected fault zone. The interpretation reveals a good correlation between the features of the Shanchiao fault and resistivity and density distribution at depth. In this observation, AMT and gravity methods provides a viable means for mapping the Shanchiao fault position and studying its features associated with the subsidence of the western side of the Taipei Basin. This study indicates the AMT and gravity methods' considerable potential for accurately mapping an active fault.

  1. Insurance Applications of Active Fault Maps Showing Epistemic Uncertainty

    NASA Astrophysics Data System (ADS)

    Woo, G.

    2005-12-01

    Insurance loss modeling for earthquakes utilizes available maps of active faulting produced by geoscientists. All such maps are subject to uncertainty, arising from lack of knowledge of fault geometry and rupture history. Field work to undertake geological fault investigations drains human and monetary resources, and this inevitably limits the resolution of fault parameters. Some areas are more accessible than others; some may be of greater social or economic importance than others; some areas may be investigated more rapidly or diligently than others; or funding restrictions may have curtailed the extent of the fault mapping program. In contrast with the aleatory uncertainty associated with the inherent variability in the dynamics of earthquake fault rupture, uncertainty associated with lack of knowledge of fault geometry and rupture history is epistemic. The extent of this epistemic uncertainty may vary substantially from one regional or national fault map to another. However aware the local cartographer may be, this uncertainty is generally not conveyed in detail to the international map user. For example, an area may be left blank for a variety of reasons, ranging from lack of sufficient investigation of a fault to lack of convincing evidence of activity. Epistemic uncertainty in fault parameters is of concern in any probabilistic assessment of seismic hazard, not least in insurance earthquake risk applications. A logic-tree framework is appropriate for incorporating epistemic uncertainty. Some insurance contracts cover specific high-value properties or transport infrastructure, and therefore are extremely sensitive to the geometry of active faulting. Alternative Risk Transfer (ART) to the capital markets may also be considered. In order for such insurance or ART contracts to be properly priced, uncertainty should be taken into account. Accordingly, an estimate is needed for the likelihood of surface rupture capable of causing severe damage. Especially where a

  2. Project DAFNE - Drilling Active Faults in Northern Europe

    NASA Astrophysics Data System (ADS)

    Kukkonen, I. T.; Ask, M. S. V.; Olesen, O.

    2012-04-01

    We are currently developing a new ICDP project 'Drillling Active Faults in Northern Europe' (DAFNE) which aims at investigating, via scientific drilling, the tectonic and structural characteristics of postglacial (PG) faults in northern Fennoscandia, including their hydrogeology and associated deep biosphere [1, 2]. During the last stages of the Weichselian glaciation (ca. 9,000 - 15,000 years B.P.), reduced ice load and glacially affected stress field resulted in active faulting in Fennoscandia with fault scarps up to 160 km long and 30 m high. These postglacial (PG) faults are usually SE dipping, SW-NE oriented thrusts, and represent reactivated, pre-existing crustal discontinuities. Postglacial faulting indicates that the glacio-isostatic compensation is not only a gradual viscoelastic phenomenon, but includes also unexpected violent earthquakes, suggestively larger than other known earthquakes in stable continental regions. The research is anticipated to advance science in neotectonics, hydrogeology and deep biosphere studies, and provide important information for nuclear waste and CO2 disposal, petroleum exploration on the Norwegian continental shelf and studies of mineral resources in PG fault areas. We expect that multidisciplinary research applying shallow and deep drilling of postglacial faults would provide significant scientific results through generating new data and models, namely: (1) Understanding PG fault genesis and controls of their locations; (2) Deep structure and depth extent of PG faults; (3) Textural, mineralogical and physical alteration of rocks in the PG faults; (4) State of stress and estimates of paleostress of PG faults; (5) Hydrogeology, hydrochemistry and hydraulic properties of PG faults; (6) Dating of tectonic reactivation(s) and temporal evolution of tectonic systems hosting PG faults; (7) Existence/non-existence of deep biosphere in PG faults; (8) Data useful for planning radioactive waste disposal in crystalline bedrock; (9) Data

  3. An updated active structure database of Taiwan for seismic hazard assessments

    NASA Astrophysics Data System (ADS)

    Shyu, J. B. H.; Chuang, Y. R.; Chen, Y. L.; Lee, Y.; Cheng, T. C. T.

    2014-12-01

    In order to build a complete seismogenic source model to assess future seismic hazards in Taiwan, we have constructed an updated active structure database for the island. We reviewed existing active structure databases, and obtained new information for structures that have not been thoroughly analyzed before. For example, the Central Geological Survey of Taiwan has published a comprehensive database of active faults in Taiwan, including all of the historically ruptured faults. Many other active structures, such as blind faults or folds that can be identified from geomorphic or structural analysis, have also been mapped and reported in several previous investigations. We have combined information from these existing databases to build an updated and digitized three-dimensional active structure map for Taiwan. Furthermore, for detailed information of individual structure such as long-term slip rates and potential recurrence intervals, we have collected the data from existing publications, as well as calculated from results of our own field surveys and investigations. We hope this updated database would become a significant constraint for the calculations of seismic hazard assessments in Taiwan, and would provide important information for engineers and hazard mitigation agencies.

  4. Research of Earthquake Potential from Active Fault Observation in Taiwan

    NASA Astrophysics Data System (ADS)

    Chien-Liang, C.; Hu, J. C.; Liu, C. C.; En, C. K.; Cheng, T. C. T.

    2015-12-01

    We utilize GAMIT/GLOBK software to estimate the precise coordinates for continuous GPS (CGPS) data of Central Geological Survey (CGS, MOEA) in Taiwan. To promote the software estimation efficiency, 250 stations are divided by 8 subnets which have been considered by station numbers, network geometry and fault distributions. Each of subnets include around 50 CGPS and 10 international GNSS service (IGS) stations. After long period of data collection and estimation, a time series variation can be build up to study the effect of earthquakes and estimate the velocity of stations. After comparing the coordinates from campaign-mode GPS sites and precise leveling benchmarks with the time series from continuous GPS stations, the velocity field is consistent with previous measurement which show the reliability of observation. We evaluate the slip rate and slip deficit rate of active faults in Taiwan by 3D block model DEFNODE. First, to get the surface fault traces and the subsurface fault geometry parameters, and then establish the block boundary model of study area. By employing the DEFNODE technique, we invert the GPS velocities for the best-fit block rotate rates, long term slip rates and slip deficit rates. Finally, the probability analysis of active faults is to establish the flow chart of 33 active faults in Taiwan. In the past two years, 16 active faults in central and northern Taiwan have been assessed to get the recurrence interval and the probabilities for the characteristic earthquake occurred in 30, 50 and 100 years.

  5. Geodynamics of the Dead Sea Fault: Do active faulting and past earthquakes determine the seismic gaps?

    NASA Astrophysics Data System (ADS)

    Meghraoui, Mustapha

    2014-05-01

    The ~1000-km-long North-South trending Dead Sea transform fault (DSF) presents structural discontinuities and includes segments that experienced large earthquakes (Mw>7) in historical times. The Wadi Araba and Jordan Valley, the Lebanese restraining bend, the Missyaf and Ghab fault segments in Syria and the Ziyaret Fault segment in Turkey display geometrical complexities made of step overs, restraining and releasing bends that may constitute major obstacles to earthquake rupture propagation. Using active tectonics, GPS measurements and paleoseismology we investigate the kinematics and long-term/short term slip rates along the DSF. Tectonic geomorphology with paleoseismic trenching and archeoseismic investigations indicate repeated faulting events and left-lateral slip rate ranging from 4 mm/yr in the southern fault section to 6 mm/yr in the northern fault section. Except for the northernmost DSF section, these estimates of fault slip rate are consistent with GPS measurements that show 4 to 5 mm/yr deformation rate across the plate boundary. However, recent GPS results showing ~2.5 mm/yr velocity rate of the northern DSF appears to be quite different than the ~6 mm/yr paleoseismic slip rate. The kinematic modeling that combines GPS and seismotectonic results implies a complex geodynamic pattern where the DSF transforms the Cyprus arc subduction zone into transpressive tectonics on the East Anatolian fault. The timing of past earthquake ruptures shows the occurrence of seismic sequences and a southward migration of large earthquakes, with the existence of major seismic gaps along strike. In this paper, we discuss the role of the DSF in the regional geodynamics and its implication on the identification of seismic gaps.

  6. Geologic map of the Hayward fault zone, Contra Costa, Alameda, and Santa Clara counties, California: a digital database

    USGS Publications Warehouse

    Graymer, R.W.; Jones, D.L.; Brabb, E.E.

    1995-01-01

    The Hayward is one of three major fault zones of the San Andreas system that have produced large historic earthquakes in the San Francisco Bay Area (the others being the San Andreas and Calaveras). Severe earthquakes were generated by this fault zone in 1836 and in 1868, and several large earthquakes have been recorded since 1868. The Hayward fault zone is considered to be the most probable source of a major earthquake in the San Francisco Bay Area, as much as 28% chance for a magnitude 7 earthquake before the year 2021 (Working Group on California Earthquake Probabilities, 1990). The Hayward fault zone, as described in this work, is a zone of highly deformed rocks, trending north 30 degrees west and ranging in width from about 2 to 10 kilometers. The historic earthquake generating activity has been concentrated in the western portion of the zone, but the zone as a whole reflects deformation derived from oblique right-lateral and compressive tectonic stress along a significant upper crustal discontinuity for the past 10 million or more years. The Hayward fault zone is bounded on the east by a series of faults that demarcate the beginning of one or more structural blocks containing rocks and structures unrelated to the Hayward fault zone. The eastern bounding faults are, from the south, the Calaveras, Stonybrook, Palomares, Miller Creek, and Moraga faults. These faults are not considered to be part of the Hayward fault zone, although they are shown on the map to demarcate its boundary. The western boundary of the zone is less clearly defined, because the alluvium of the San Francisco Bay and Santa Clara Valley basins obscures bedrock and structural relationships. Although several of the westernmost faults in the zone clearly project under or through the alluvium, the western boundary of the fault is generally considered to be the westernmost mapped fault, which corresponds more or less with the margin of thick unconsolidated surficial deposits. The Hayward fault

  7. Probabilistic seismic hazard study based on active fault and finite element geodynamic models

    NASA Astrophysics Data System (ADS)

    Kastelic, Vanja; Carafa, Michele M. C.; Visini, Francesco

    2016-04-01

    We present a probabilistic seismic hazard analysis (PSHA) that is exclusively based on active faults and geodynamic finite element input models whereas seismic catalogues were used only in a posterior comparison. We applied the developed model in the External Dinarides, a slow deforming thrust-and-fold belt at the contact between Adria and Eurasia.. is the Our method consists of establishing s two earthquake rupture forecast models: (i) a geological active fault input (GEO) model and, (ii) a finite element (FEM) model. The GEO model is based on active fault database that provides information on fault location and its geometric and kinematic parameters together with estimations on its slip rate. By default in this model all deformation is set to be released along the active faults. The FEM model is based on a numerical geodynamic model developed for the region of study. In this model the deformation is, besides along the active faults, released also in the volumetric continuum elements. From both models we calculated their corresponding activity rates, its earthquake rates and their final expected peak ground accelerations. We investigated both the source model and the earthquake model uncertainties by varying the main active fault and earthquake rate calculation parameters through constructing corresponding branches of the seismic hazard logic tree. Hazard maps and UHS curves have been produced for horizontal ground motion on bedrock conditions VS 30 ≥ 800 m/s), thereby not considering local site amplification effects. The hazard was computed over a 0.2° spaced grid considering 648 branches of the logic tree and the mean value of 10% probability of exceedance in 50 years hazard level, while the 5th and 95th percentiles were also computed to investigate the model limits. We conducted a sensitivity analysis to control which of the input parameters influence the final hazard results in which measure. The results of such comparison evidence the deformation model and

  8. Erosion influences the seismicity of active thrust faults.

    PubMed

    Steer, Philippe; Simoes, Martine; Cattin, Rodolphe; Shyu, J Bruce H

    2014-11-21

    Assessing seismic hazards remains one of the most challenging scientific issues in Earth sciences. Deep tectonic processes are classically considered as the only persistent mechanism driving the stress loading of active faults over a seismic cycle. Here we show via a mechanical model that erosion also significantly influences the stress loading of thrust faults at the timescale of a seismic cycle. Indeed, erosion rates of about ~0.1-20 mm yr(-1), as documented in Taiwan and in other active compressional orogens, can raise the Coulomb stress by ~0.1-10 bar on the nearby thrust faults over the inter-seismic phase. Mass transfers induced by surface processes in general, during continuous or short-lived and intense events, represent a prominent mechanism for inter-seismic stress loading of faults near the surface. Such stresses are probably sufficient to trigger shallow seismicity or promote the rupture of deep continental earthquakes up to the surface.

  9. Assessment of Morphotectonic Influences on Hydrological Environment in Vicinity of an Active Fault

    NASA Astrophysics Data System (ADS)

    Singh, A.; Mukherjee, S.

    2011-12-01

    Studying effects of faulted zones in shaping the hydrological environment of any landscape in a long run is difficult, though these can play a crucial role in regulating the flow and accumulation of water. While aquifer recharge is directly influenced by the structural changes associated with tectonic activity, surface flow may also be influenced depending upon the topography. While planning for water resource management, groundwater remediation or hydrological restoration it is imperative to understand and suitably include these influences to derive maximum benefit. This study aimed at characterization of surface as well as subsurface hydrological conditions in a hard-rock terrain, morphed under the influence of neotectonic activity, associated with tensional type of faulting. The area selected lies approximately between 28.20 - 28.60 N and 77.00 - 77.40 E, in vicinity of an active fault, with quartzitic rocks showing signs of multiple folding. Associated tear faults in adjoining areas have also been observed. To initially identify sites suitable for geophysical surveys, a spatial analysis involving seismic data and 3D visualization was done to identify the lineaments. The information thus obtained was correlated with geological information derived from hyperspectral satellite imagery. Geochemical analysis was also performed to verify the same. Influence of faulting activity on regulating water flow on surface as well as groundwater was studied. For surface water bodies hydrological analysis on elevation data (DEM) was performed whereas for subsurface recharge, margins of geological units were targeted. This was confirmed by actual field geophysical (resistivity) surveys at suitable strategic locations. The relative influences of structural lineaments on regulating subsurface water storage were also determined. The resulting database in GIS platform can also be used for flow modeling and aquifer potential / vulnerability studies. Also, the role of faulting

  10. Active faulting in apparently stable peninsular India: Rift inversion and a Holocene-age great earthquake on the Tapti Fault

    NASA Astrophysics Data System (ADS)

    Copley, Alex; Mitra, Supriyo; Sloan, R. Alastair; Gaonkar, Sharad; Reynolds, Kirsty

    2014-08-01

    We present observations of active faulting within peninsular India, far from the surrounding plate boundaries. Offset alluvial fan surfaces indicate one or more magnitude 7.6-8.4 thrust-faulting earthquakes on the Tapti Fault (Maharashtra, western India) during the Holocene. The high ratio of fault displacement to length on the alluvial fan offsets implies high stress-drop faulting, as has been observed elsewhere in the peninsula. The along-strike extent of the fan offsets is similar to the thickness of the seismogenic layer, suggesting a roughly equidimensional fault rupture. The subsiding footwall of the fault is likely to have been responsible for altering the continental-scale drainage pattern in central India and creating the large west flowing catchment of the Tapti river. A preexisting sedimentary basin in the uplifting hanging wall implies that the Tapti Fault was active as a normal fault during the Mesozoic and has been reactivated as a thrust, highlighting the role of preexisting structures in determining the rheology and deformation of the lithosphere. The slip sense of faults and earthquakes in India suggests that deformation south of the Ganges foreland basin is driven by the compressive force transmitted between India and the Tibetan Plateau. The along-strike continuation of faulting to the east of the Holocene ruptures we have studied represents a significant seismic hazard in central India.

  11. Evaluation of feasibility of mapping seismically active faults in Alaska

    NASA Technical Reports Server (NTRS)

    Gedney, L. D.; Vanwormer, J. D. (Principal Investigator)

    1973-01-01

    The author has identified the following significant results. The sharp bend in the Alaska Range near 65 deg N, 150 deg W in now thought to enclose a corner of the northwesterly migrating north Pacific lithospheric plate. Subduction of the plate beneath the continent is believed, on the basis of hypocentral distribution, to occur along Cook Inlet and the eastern flanks of the Aleutian and Alaska Ranges as far northward as Mt. McKinley. The nature of tectonic deformation here, particularly in the area of the bend in the Alaska Range, is understandably complex. The Denali fault is thought to be a transform character in the vicinity of Mt. McKinley (i.e., it is thought to be the surface along which the oceanic plate separates from the continental plate). On the ERTS-1 imagery, however, it appears that there are a number of sub-parallel faults which branch off of the Denali fault in a southwesterly direction. Slippage along these would tend to squeeze material around the inside of the band rather than the plate being directly underthrust. All of these sub-parallel faults are seismically active. The right-lateral fault-plane solution obtained for this event is consistent with the concept of slippage around the bend on a set of sub-parallel faults in the manner postulated. The best images to show these features are 1066-20444 and 1266-20572.

  12. Active tectonics west of New Zealand's Alpine Fault: South Westland Fault Zone activity shows Australian Plate instability

    NASA Astrophysics Data System (ADS)

    De Pascale, Gregory P.; Chandler-Yates, Nicholas; Dela Pena, Federico; Wilson, Pam; May, Elijah; Twiss, Amber; Cheng, Che

    2016-04-01

    The 300 km long South Westland Fault Zone (SWFZ) is within the footwall of the Central Alpine Fault (<20 km away) and has 3500 m of dip-slip displacement, but it has been unknown if the fault is active. Here the first evidence for SWFZ thrust faulting in the "stable" Australian Plate is shown with cumulative dip-slip displacements up to 5.9 m (with 3 m throw) on Pleistocene and Holocene sediments and gentle hanging wall anticlinal folding. Cone penetration test (CPT) stratigraphy shows repeated sequences within the fault scarp (consistent with thrusting). Optically stimulated luminescence (OSL) dating constrains the most recent rupture post-12.1 ± 1.7 ka with evidence for three to four events during earthquakes of at least Mw 6.8. This study shows significant deformation is accommodated on poorly characterized Australian Plate structures northwest of the Alpine Fault and demonstrates that major active and seismogenic structures remain uncharacterized in densely forested regions on Earth.

  13. Neogene exhumation in the eastern Alaska Range and its relationship to splay fault activity in the Denali fault system

    NASA Astrophysics Data System (ADS)

    Waldien, T.; Roeske, S.; Benowitz, J.; Allen, W. K.; Ridgway, K.

    2015-12-01

    Dextral oblique convergence in the Denali fault system results from subduction zone strain in the Alaska syntaxis that is partitioned into the upper plate. This convergence is accommodated by dextral-reverse oblique slip on segments of the main strand of the Denali fault in the center of the Alaska Range and by splay faults north and south of the Denali fault at the margins of the Alaska Range. Low-temp. thermochronometry applied to basement rocks bounded by faults within the Denali fault system aids stratigraphic data to determine the timing and locations of exhumation in the Alaska Range, which augment regional seismicity studies aimed at resolving modern fault activity in the Denali fault system. The McCallum Creek and Broxson Gulch faults are north-dipping faults that splay southward from the Denali fault near the Delta River and mark the southern margin of the eastern Alaska Range. Apatite fission track thermochronometry on rocks north of the McCallum Creek fault shows rapid cooling in the hanging wall coeval with basin development in the footwall initiating at the Miocene-Pliocene boundary. Apatite fission track and apatite (U-Th)/He ages from plutonic rocks in the hanging wall of the Broxson Gulch fault, west of the McCallum Creek fault, show final cooling in the Miocene, slightly younger than hanging wall cooling associated with the Susitna Glacier thrust further to the west. Neogene low-temp. cooling ages in the hanging walls of the Susitna Glacier thrust, Broxson Gulch, and McCallum Creek faults suggest that these structures have been accommodating convergence in the Denali fault system throughout the Neogene. More recent cooling in the hanging wall of the McCallum Creek compared to the Susitna Glacier thrust suggests that this fault-related exhumation has migrated eastward throughout the Neogene. Convergence on these splay faults south of the Denali fault results in internal contraction of the crust south of the Denali fault, implying that the Southern

  14. Active faulting on the Wallula fault within the Olympic-Wallowa Lineament (OWL), eastern Washington State

    NASA Astrophysics Data System (ADS)

    Sherrod, B. L.; Lasher, J. P.; Barnett, E. A.

    2013-12-01

    Several studies over the last 40 years focused on a segment of the Wallula fault exposed in a quarry at Finley, Washington. The Wallula fault is important because it is part of the Olympic-Wallowa lineament (OWL), a ~500-km-long topographic and structural lineament extending from Vancouver Island, British Columbia to Walla Walla, Washington that accommodates Basin and Range extension. The origin and nature of the OWL is of interest because it contains potentially active faults that are within 50 km of high-level nuclear waste facilities at the Hanford Site. Mapping in the 1970's and 1980's suggested the Wallula fault did not offset Holocene and late Pleistocene deposits and is therefore inactive. New exposures of the Finley quarry wall studied here suggest otherwise. We map three main packages of rocks and sediments in a ~10 m high quarry exposure. The oldest rocks are very fine grained basalts of the Columbia River Basalt Group (~13.5 Ma). The next youngest deposits include a thin layer of vesicular basalt, white volcaniclastic deposits, colluvium containing clasts of vesicular basalt, and indurated paleosols. A distinct angular unconformity separates these vesicular basalt-bearing units from overlying late Pleistocene flood deposits, two colluvium layers containing angular clasts of basalt, and Holocene tephra-bearing loess. A tephra within the loess likely correlates to nearby outcrops of Mazama ash. We recognize three styles of faults: 1) a near vertical master reverse or oblique fault juxtaposing very fine grained basalt against late Tertiary-Holocene deposits, and marked by a thick (~40 cm) vertical seam of carbonate cemented breccia; 2) subvertical faults that flatten upwards and displace late Tertiary(?) to Quaternary(?) soils, colluvium, and volcaniclastic deposits; and 3) flexural slip faults along bedding planes in folded deposits in the footwall. We infer at least two Holocene earthquakes from the quarry exposure. The first Holocene earthquake deformed

  15. Active faulting and devastating earthquakes in continental China

    NASA Astrophysics Data System (ADS)

    Zhang, P.

    2003-04-01

    The primary pattern of active tectonics in continental China is characterized by relative movements and interactions of tectonic blocks bounded by major active faults. Earthquakes are results of abrupt releases of accumulated strain energy that excesses the threshold of strength of brittle part of the earth’s crust. Boundaries of tectonic blocks are the locations of most discontinuous deformation and highest gradient of stress accumulation, thus are the most likely places for strain energy accumulation and releases, and in turn, devastating earthquakes. Almost all earthquakes of magnitude larger than 8 and 80~90% of earthquakes of magnitude over 7 occur along boundaries of active tectonic blocks. This fact indicates that differential movements and interactions of active tectonic blocks are the primary mechanism for the occurrences of devastating earthquakes. Northeastern margin of Tibetan Plateau consists of two active fault zones, the Haiyuan and the Xiangshan fault zones. Each of the zones can be further divided into several segments. Historical earthquakes during the past 800 years ruptured all of them except one segment, the so-called Tianzhu seismic gap. We have conducted paleoseismological studies on each of the segments of the fault zones. Preliminary results reveal temporal clustering features of long-term paleoearthquake activity along these two fault zones. The 1920 Haiyuan earthquake of magnitude 8.5, for example, ruptured three segments of the fault zone. We dug 19 trenches along different segments of the surface ruptures. There were 3 events along the eastern segment during the past 14000 years, 7 events along the middle segment during the past 9000 years, and 6 events along the western segment during the past 10000 years. These events clearly depict two temporal clusters. The first cluster occurs from 4600 to 6400 years, and the second occurs from 1000 to 2800 years, approximately. Each cluster lasts about 2000 years. Time period between these two

  16. Constraining fault activity by investigating tectonically-deformed Quaternary palaeoshorelines using a synchronous correlation method: the Capo D'Orlando Fault as a case study (NE Sicily, Italy)

    NASA Astrophysics Data System (ADS)

    Meschis, Marco; Roberts, Gerald P.; Robertson, Jennifer

    2016-04-01

    Long-term curstal extension rates, accommodated by active normal faults, can be constrained by investigating Late Quaternary vertical movements. Sequences of marine terraces tectonically deformed by active faults mark the interaction between tectonic activity, sea-level changes and active faulting throughout the Quaternary (e.g. Armijo et al., 1996, Giunta et al, 2011, Roberts et al., 2013). Crustal deformation can be calculated over multiple seismic cycles by mapping Quaternary tectonically-deformed palaeoshorelines, both in the hangingwall and footwall of active normal faults (Roberts et al., 2013). Here we use a synchronous correlation method between palaeoshorelines elevations and the ages of sea-level highstands (see Roberts et al., 2013 for further details) which takes advantage of the facts that (i) sea-level highstands are not evenly-spaced in time, yet must correlate with palaeoshorelines that are commonly not evenly-spaced in elevation, and (ii) that older terraces may be destroyed and/or overprinted by younger highstands, so that the next higher or lower paleoshoreline does not necessarily correlate with the next older or younger sea-level highstand. We investigated a flight of Late Quaternary marine terraces deformed by normal faulting as a result of the Capo D'Orlando Fault in NE Sicily (e.g. Giunta et al., 2011). This fault lies within the Calabrian Arc which has experienced damaging seismic events such as the 1908 Messina Straits earthquake ~ Mw 7. Our mapping and previous mapping (Giunta et al. (2011) demonstrate that the elevations of marine terraces inner edges change along the strike the NE - SW oriented normal fault. This confirms active deformation on the Capo D'Orlando Fault, strongly suggesting that it should be added into the Database of Individual Seismogenic Sources (DISS, Basili et al., 2008). Giunta et al. (2011) suggested that uplift rates and hence faults lip-rates vary through time for this examples. We update the ages assigned to

  17. Identification of recently active faults and folds in Java, Indonesia

    NASA Astrophysics Data System (ADS)

    Marliyani, G. I.; Arrowsmith, R.; Helmi, H.

    2013-12-01

    We analyze the spatial pattern of active deformation in Java, Indonesia with the aim of characterizing the deformation of the upper plate of the subduction zone in this region. The lack of detailed neotectonic studies in Java is mostly because of its relatively low rate of deformation in spite of significant historical seismic activity. In addition, the abundance of young volcanic materials as well as the region's high precipitation rate and vegetation cover obscure structural relationships and prevent reliable estimates of offset along active faults as well as exhumed intra-arc faults. Detailed maps of active faults derived from satellite and field-based neotectonic mapping, paleoseismic data, as well as new data on the fault kinematics and estimates of orientation of principal stresses from volcano morphology characterize recently active faults and folds. The structures in West Java are dominated by strike-slip faulting, while Central and northern part of East Java are dominated by folds and thrusting with minor normal faulting. The structures vary in length from hundreds meters to tens of kilometers and mainly trend N75°E, N8°E with some minor N45°W. Our preliminary mapping indicates that there are no large scale continuous structures in Java, and that instead deformation is distributed over wide areas along small structures. We established several paleoseismic sites along some of the identified structures. We excavated two shallow trenches along the Pasuruan fault, a normal fault striking NW-SE that forms a straight 13 km scarp cutting Pleistocene deltaic deposits of the north shore of East Java. The trenches exposed faulted and folded fluvial, alluvial and colluvial strata that record at least four ground-rupturing earthquakes since the Pleistocene. The Pasuruan site proves its potential to provide a paleoseismic record rarely found in Java. Abundant Quaternary volcanoes are emplaced throughout Java; most of the volcanoes show elongation in N100°E and N20

  18. Planning a Preliminary program for Earthquake Loss Estimation and Emergency Operation by Three-dimensional Structural Model of Active Faults

    NASA Astrophysics Data System (ADS)

    Ke, M. C.

    2015-12-01

    Large scale earthquakes often cause serious economic losses and a lot of deaths. Because the seismic magnitude, the occurring time and the occurring location of earthquakes are still unable to predict now. The pre-disaster risk modeling and post-disaster operation are really important works of reducing earthquake damages. In order to understanding disaster risk of earthquakes, people usually use the technology of Earthquake simulation to build the earthquake scenarios. Therefore, Point source, fault line source and fault plane source are the models which often are used as a seismic source of scenarios. The assessment results made from different models used on risk assessment and emergency operation of earthquakes are well, but the accuracy of the assessment results could still be upgrade. This program invites experts and scholars from Taiwan University, National Central University, and National Cheng Kung University, and tries using historical records of earthquakes, geological data and geophysical data to build underground three-dimensional structure planes of active faults. It is a purpose to replace projection fault planes by underground fault planes as similar true. The analysis accuracy of earthquake prevention efforts can be upgraded by this database. Then these three-dimensional data will be applied to different stages of disaster prevention. For pre-disaster, results of earthquake risk analysis obtained by the three-dimensional data of the fault plane are closer to real damage. For disaster, three-dimensional data of the fault plane can be help to speculate that aftershocks distributed and serious damage area. The program has been used 14 geological profiles to build the three dimensional data of Hsinchu fault and HisnCheng faults in 2015. Other active faults will be completed in 2018 and be actually applied on earthquake disaster prevention.

  19. Evaluation of feasibility of mapping seismically active faults in Alaska

    NASA Technical Reports Server (NTRS)

    Gedney, L. D. (Principal Investigator); Vanwormer, J. D.

    1973-01-01

    The author has identified the following significant results. ERTS-1 imagery is proving to be exceptionally useful in delineating structural features in Alaska which have never been recognized on the ground. Previously unmapped features such as seismically active faults and major structural lineaments are especially evident. Among the more significant results of this investigation is the discovery of an active strand of the Denali fault. The new fault has a history of scattered activity and was the scene of a magnitude 4.8 earthquake on October 1, 1972. Of greater significance is the disclosure of a large scale conjugate fracture system north of the Alaska Range. This fracture system appears to result from compressive stress radiating outward from around Mt. McKinley. One member of the system was the scene of a magnitude 6.5 earthquake in 1968. The potential value of ERTS-1 imagery to land use planning is reflected in the fact that this earthquake occurred within 10 km of the site which was proposed for the Rampart Dam, and the fault on which it occurred passes very near the proposed site for the bridge and oil pipeline crossing of the Yukon River.

  20. Exhumation history of an active fault to constrain a fault-based seismic hazard scenario: the Pizzalto fault (central Apennines, Italy) example.

    NASA Astrophysics Data System (ADS)

    Tesson, Jim; Pace, Bruno; Benedetti, Lucilla; Visini, Francesco; Delli Rocioli, Mattia; Didier, Bourles; Karim, keddadouche; Gorges, Aumaitre

    2016-04-01

    A prerequisite to constrain fault-based and time-dependent earthquake rupture forecast models is to acquire data on the past large earthquake frequency on an individual seismogenic source and to compare all the recorded occurrences in the active fault-system. We investigated the Holocene seismic history of the Pizzalto normal fault, a 13 km long fault segment belonging to the Pizzalto-Rotella-Aremogna fault system in the Apennines (Italy). We collected 44 samples on the Holocene exhumed Pizzalto fault plane and analyzed their 36Cl and rare earth elements content. Conjointly used, the 36Cl and REE concentrations show that at least 6 events have exhumed 4.4 m of the fault scarp between 3 and 1 ka BP, the slip per event ranging from 0.3 to 1.2 m. No major events have been detected over the last 1 ka. The Rotella-Aremogna-Pizzalto fault system has a clustered earthquake behaviour with a mean recurrence time of 1.2 ka and a low to moderate probability (ranging from 4% to 26%) of earthquake occurrence over the next 50 years. We observed similarities between seismic histories of several faults belonging to two adjacent fault systems. This could again attest that non-random processes occurring in the release of the strain accumulated on faults, commonly referred to as fault interactions and leading to apparent synchronization. If these processes were determined as being the main parameter controlling the occurrence of earthquakes, it would be crucial to take them into account in seismic hazard models.

  1. Mapping of active faults based on the analysis of high-resolution seismic reflection profiles in offshore Montenegro

    NASA Astrophysics Data System (ADS)

    Vucic, Ljiljana; Glavatovic, Branislav

    2014-05-01

    High-resolution seismic-reflection data analysis is considered as important tool for mapping of active tectonic faults, since seismic exploration methods on varied scales can image subsurface structures of different depth ranges. Mapping of active faults for the offshore area of Montenegro is performed in Petrel software, using reflection database consist of 2D profiles in length of about 3.500 kilometers and 311 square kilometers of 3D seismics, acquired from 1979 to 2003. Montenegro offshore area is influenced by recent tectonic activity with numerous faults, folded faults and over trusts. Based on reflection profiles analysis, the trust fault system offshore Montenegro is reveled, parallel to the coast and extending up to 15 kilometers from the offshore line. Then, the system of normal top carbonate fault planes is mapped and characterized on the southern Adriatic, with NE trending. The tectonic interpretation of the seismic reflection profiles in Montenegro point toward the existence of principally reverse tectonic forms in the carbonate sediments, covered by young Quaternary sandy sediments of thickness 1-3 kilometers. Also, reflective seismic data indicate the active uplifting of evaporite dome on about 10 kilometers of coastline.

  2. Palaeoseismology of the L'Aquila faults (central Italy, 2009, Mw 6.3 earthquake): implications for active fault linkage

    NASA Astrophysics Data System (ADS)

    Galli, Paolo A. C.; Giaccio, Biagio; Messina, Paolo; Peronace, Edoardo; Zuppi, Giovanni Maria

    2011-12-01

    Urgent urban-planning problems related to the 2009 April, Mw 6.3, L'Aquila earthquake prompted immediate excavation of palaeoseismological trenches across the active faults bordering the Aterno river valley; namely, the Mt. Marine, Mt. Pettino and Paganica faults. Cross-cutting correlations amongst existing and new trenches that were strengthened by radiocarbon ages and archaeological constraints show unambiguously that these three investigated structures have been active since the Last Glacial Maximum period, as seen by the metric offset that affected the whole slope/alluvial sedimentary succession up to the historical deposits. Moreover, in agreement with both 18th century accounts and previous palaeoseismological data, we can affirm now that these faults were responsible for the catastrophic 1703 February 2, earthquake (Mw 6.7). The data indicate that the Paganica-San Demetrio fault system has ruptured in the past both together with the conterminous Mt. Pettino-Mt. Marine fault system, along more than 30 km and causing an Mw 6.7 earthquake, and on its own, along ca. 19 km, as in the recent 2009 event and in the similar 1461 AD event. This behaviour of the L'Aquila faults has important implications in terms of seismic hazard assessment, while it also casts new light on the ongoing fault linkage processes amongst these L'Aquila faults.

  3. Lateral propagation of active normal faults throughout pre-existing fault zones: an example from the Southern Apennines, Italy

    NASA Astrophysics Data System (ADS)

    Agosta, Fabrizio; Prosser, Giacomo; Ivo Giano, Salvatore

    2013-04-01

    The main active structures in the Southern Apennines are represented by a set of NW-trending normal faults, which are mainly located in the axial sector of the chain. Evidences arising from neotectonics and seismology show activity of a composite seismic source, the Irpinia - Agri Valley, located across the Campania-Basilicata border. This seismic source is made up of two right-stepping, individual seismic sources forming a relay ramp. Each individual seismic source consists of a series of nearly parallel normal fault segments. The relay ramp area, located around the Vietri di Potenza town, is bounded by two seismic segments, the San Gregorio Magno Fault, to the NW, and the Pergola-Melandro Fault, to the SE. The possible interaction between the two right-stepping fault segments has not been proven yet, since the fault system of the area has never been analyzed in detail. This work is aimed at assessing the geometry of such fault system, inferring the relative age of the different fault sets by studying the crosscutting relationships, characterizing the micromechanics of fault rocks associated to the various fault sets, and understanding the modalities of lateral propagation of the two bounding fault segments. Crosscutting relationships are recognized by combining classical geological mapping with morphotectonic methods. This latter approach, which include the analysis of aerial photographs and field inspection of quaternary slope deposits, is used to identify the most recent structures among those cropping out in the field area. In the relay ramp area, normal faults crosscut different tectonic units of the Apennine chain piled up, essentially, during the Middle to Late Miocene. The topmost unit (only few tens of meter-thick) consists of a mélange containing blocks of different lithologies in a clayish matrix. The intermediate thrust sheet consists of 1-1.5 km-thick platform carbonates of late Triassic-Jurassic age, with dolomites at the base and limestones at the

  4. Active fault segments as potential earthquake sources: Inferences from integrated geophysical mapping of the Magadi fault system, southern Kenya Rift

    NASA Astrophysics Data System (ADS)

    Kuria, Z. N.; Woldai, T.; van der Meer, F. D.; Barongo, J. O.

    2010-06-01

    Southern Kenya Rift has been known as a region of high geodynamic activity expressed by recent volcanism, geothermal activity and high rate of seismicity. The active faults that host these activities have not been investigated to determine their subsurface geometry, faulting intensity and constituents (fluids, sediments) for proper characterization of tectonic rift extension. Two different models of extension direction (E-W to ESE-WNW and NW-SE) have been proposed. However, they were based on limited field data and lacked subsurface investigations. In this research, we delineated active fault zones from ASTER image draped on ASTER DEM, together with relocated earthquakes. Subsequently, we combined field geologic mapping, electrical resistivity, ground magnetic traverses and aeromagnetic data to investigate the subsurface character of the active faults. Our results from structural studies identified four fault sets of different age and deformational styles, namely: normal N-S; dextral NW-SE; strike slip ENE-WSW; and sinistral NE-SW. The previous studies did not recognize the existence of the sinistral oblique slip NE-SW trending faults which were created under an E-W extension to counterbalance the NW-SE faults. The E-W extension has also been confirmed from focal mechanism solutions of the swarm earthquakes, which are located where all the four fault sets intersect. Our findings therefore, bridge the existing gap in opinion on neo-tectonic extension of the rift suggested by the earlier authors. Our results from resistivity survey show that the southern faults are in filled with fluid (0.05 and 0.2 Ωm), whereas fault zones to the north contain high resistivity (55-75 Ωm) material. The ground magnetic survey results have revealed faulting activity within active fault zones that do not contain fluids. In addition, the 2D inversion of the four aero-magnetic profiles (209 km long) revealed: major vertical to sub vertical faults (dipping 75-85° east or west); an

  5. Active tectonics of the Seattle fault and central Puget sound, Washington - Implications for earthquake hazards

    USGS Publications Warehouse

    Johnson, S.Y.; Dadisman, S.V.; Childs, J. R.; Stanley, W.D.

    1999-01-01

    We use an extensive network of marine high-resolution and conventional industry seismic-reflection data to constrain the location, shallow structure, and displacement rates of the Seattle fault zone and crosscutting high-angle faults in the Puget Lowland of western Washington. Analysis of seismic profiles extending 50 km across the Puget Lowland from Lake Washington to Hood Canal indicates that the west-trending Seattle fault comprises a broad (4-6 km) zone of three or more south-dipping reverse faults. Quaternary sediment has been folded and faulted along all faults in the zone but is clearly most pronounced along fault A, the northernmost fault, which forms the boundary between the Seattle uplift and Seattle basin. Analysis of growth strata deposited across fault A indicate minimum Quaternary slip rates of about 0.6 mm/yr. Slip rates across the entire zone are estimated to be 0.7-1.1 mm/yr. The Seattle fault is cut into two main segments by an active, north-trending, high-angle, strike-slip fault zone with cumulative dextral displacement of about 2.4 km. Faults in this zone truncate and warp reflections in Tertiary and Quaternary strata and locally coincide with bathymetric lineaments. Cumulative slip rates on these faults may exceed 0.2 mm/yr. Assuming no other crosscutting faults, this north-trending fault zone divides the Seattle fault into 30-40-km-long western and eastern segments. Although this geometry could limit the area ruptured in some Seattle fault earthquakes, a large event ca. A.D. 900 appears to have involved both segments. Regional seismic-hazard assessments must (1) incorporate new information on fault length, geometry, and displacement rates on the Seattle fault, and (2) consider the hazard presented by the previously unrecognized, north-trending fault zone.

  6. Determining the Through-Going Active Fault Geometry of the Western North Anatolian Fault Through Stress Modeling

    NASA Astrophysics Data System (ADS)

    Karimi, B.; McQuarrie, N.

    2015-12-01

    The North Anatolian Fault (NAF) is a seismically active 1200 km long dextral strike-slip fault part of an east-west trending dextral shear zone (NAF system) between the Anatolian and Eurasian plates. This shear zone widens to the west, complicating potential earthquake rupture paths and highlighting the importance of understanding the geometry of active fault systems. West of the town of Bolu - the NAF bifurcates into the northern and southern strands, which converge and are linked through the Mudurnu Valley, then diverge to border the Marmara Sea. The westward continuation of these two fault traces is marked by further complexities in potential active fault geometry, particularly in the Marmara Sea (northern strand), and the Biga Peninsula (southern strand). We evaluate potential active fault geometries for both strands by comparing stress models of various fault geometries in these regions to a record of focal mechanisms and inferred paleostress from a lineament analysis. For the Marmara region, two of the three possible geometries matched the maximum horizontal stress (σH) orientations determined from a record of focal mechanisms; however, only one represented the northern and southern sidewalls associated with the principal zone of deformation of the developing Marmara basin. This suggests that it is the most likely representation of the active through-going fault geometry in the region. In the Biga Peninsula region, the active geometry of the southern strand has the southern component approaching and intersecting the northern component through a linking feature in a narrow topographic valley. This geometry was selected over two others as it overlaps the σH orientation determined from focal mechanism data and a lineament analysis. Additionally, this geometry does not develop a prominent mis-oriented NE-SW stress feature observed in the model results of the other two geometries, otherwise absent in the focal mechanism data or inferred from a lineament analysis.

  7. Interseismic deformations along Ecuador active fault systems: Contribution of space-borne SAR Interferometry

    NASA Astrophysics Data System (ADS)

    Champenois, J.; Audin, L.; Baize, S.; Nocquet, J.; Alvarado, A.

    2013-05-01

    Located in the Northern Andes along the active subduction zone of the Nazca plate beneath the South American continent, Ecuador is highly exposed to seismic hazard. Up to now, numerous multidisciplinary studies for the last ten years focused on the seismicity related to the subduction, whereas few investigations concentrated on the crustal seismicity in the upper plate (through few strong events like the 1797 Riobamba earthquake, ML 8.3, 12.000 deaths). The faults that are responsible of these earthquakes are poorly known in term of slip rate and in some cases are even not identified yet. To address this issue and compare the interseismic data to the geomorphological long term signature of active faulting we propose to use multi-temporal Synthetic Aperture Radar Interferometry (InSAR) methods.Using these cost-effective techniques, we are able to investigate surface interseismic deformation with an unprecedented spatial density of measurements (highly superior to Global Positioning System network density). This study presents preliminary results of tectonic surface deformation using ERS (1993-2000) and Envisat (2002-2010) SAR data in the Inter Andean Valley and along the eastern border of the North Andean Block, where is accommodated the relative displacement between the North Andean Block and South America plate (~ 8 mm/yr). We generated average velocity maps and consistent time-series of displacements with values measured along the line of sight of the radar. Resulting maps of ground displacements are calibrated by GPS data in order to provide a homogeneous database. These preliminary results show large scale deformation localized on some major fault systems in the Inter Andean Valley (from Quito to north of Cuenca) and allow an updating of the active faults map. Moreover, these InSAR results permit detecting and quantifying ground deformation due to volcanic unrest.

  8. Tectonic activity and structural features of active intracontinental normal faults in the Weihe Graben, central China

    NASA Astrophysics Data System (ADS)

    Rao, Gang; Lin, Aiming; Yan, Bing; Jia, Dong; Wu, Xiaojun

    2014-12-01

    This study examines the tectonic activity and structural features of active normal faults in the Weihe Graben, central China. The Weihe Graben is an area with a high level of historic seismicity, and it is one of the intracontinental systems that developed since Tertiary in the extensional environment around the Ordos Block. Analysis of high-resolution remote-sensing imagery data, field observations, and radiocarbon dating results reveal the following: i) active normal faults are mainly developed within a zone < 500 m wide along the southern border of the eastern part of the Weihe Graben; ii) the active faults that have been identified are characterized by stepwise fault scarps dipping into the graben at angles of 40°-71°; iii) there are numerous discontinuous individual fault traces, ranging in length from a few tens of meters to 450 m (generally < 200 m); iv) fault zone structures, topographic features, and fault striations on the main fault planes indicate almost pure normal-slip; and v) late Pleistocene-Holocene terrace risers, loess, and alluvial deposits have been vertically offset by up to ~ 80 m, with a non-uniform dip-slip rate (throw-rates) ranging from ~ 2.1 to 5.7 mm/yr, mostly 2-3 mm/yr. Our results reveal that active normal faults have been developing in the Weihe Graben under an ongoing extensional environment, probably associated with the pre-existing graben and spreading of the continental crust, and this is in contrast with the Ordos Block and neighboring orogenic regions. These results provide new insights into the nature of extensional tectonic deformation in intracontinental graben systems.

  9. Safety enhancement of oil trunk pipeline crossing active faults on Sakhalin Island

    NASA Astrophysics Data System (ADS)

    Tishkina, E.; Antropova, N.; Korotchenko, T.

    2015-11-01

    The article explores the issues concerning safety enhancement of pipeline active fault crossing on Sakhalin Island. Based on the complexity and analysis results, all the faults crossed by pipeline system are classified into five categories - from very simple faults to extremely complex ones. The pipeline fault crossing design is developed in accordance with the fault category. To enhance pipeline safety at fault crossing, a set of methods should be applied: use of pipes of different safety classes and special trench design in accordance with soil permeability characteristics.

  10. Active Fault Tolerant Control for Ultrasonic Piezoelectric Motor

    NASA Astrophysics Data System (ADS)

    Boukhnifer, Moussa

    2012-07-01

    Ultrasonic piezoelectric motor technology is an important system component in integrated mechatronics devices working on extreme operating conditions. Due to these constraints, robustness and performance of the control interfaces should be taken into account in the motor design. In this paper, we apply a new architecture for a fault tolerant control using Youla parameterization for an ultrasonic piezoelectric motor. The distinguished feature of proposed controller architecture is that it shows structurally how the controller design for performance and robustness may be done separately which has the potential to overcome the conflict between performance and robustness in the traditional feedback framework. A fault tolerant control architecture includes two parts: one part for performance and the other part for robustness. The controller design works in such a way that the feedback control system will be solely controlled by the proportional plus double-integral PI2 performance controller for a nominal model without disturbances and H∞ robustification controller will only be activated in the presence of the uncertainties or an external disturbances. The simulation results demonstrate the effectiveness of the proposed fault tolerant control architecture.

  11. Searching for Seismically Active Faults in the Gulf of Cadiz

    NASA Astrophysics Data System (ADS)

    Custodio, S.; Antunes, V.; Arroucau, P.

    2015-12-01

    The repeated occurrence of large magnitude earthquakes in southwest Iberia in historical and instrumental times suggests the presence of active fault segments in the region. However, due to an apparently diffuse seismicity pattern defining a broad region of distributed deformation west of Gibraltar Strait, the question of the location, dimension and geometry of such structures is still open to debate. We recently developed a new algorithm for earthquake location in 3D complex media with laterally varying interface depths, which allowed us to relocate 2363 events having occurred from 2007 to 2013, using P- and S-wave catalog arrival times obtained from the Portuguese Meteorological Institute (IPMA, Instituto Portugues do Mar e da Atmosfera), for a study area lying between 8.5˚W and 5˚W in longitude and 36˚ and 37.5˚ in latitude. The most remarkable change in the seismicity pattern after relocation is an apparent concentration of events, in the North of the Gulf of Cadiz, along a low angle northward-dipping plane rooted at the base of the crust, which could indicate the presence of a major fault. If confirmed, this would be the first structure clearly illuminated by seismicity in a region that has unleashed large magnitude earthquakes. Here, we present results from the joint analysis of focal mechanism solutions and waveform similarity between neighboring events from waveform cross-correlation in order to assess whether those earthquakes occur on the same fault plane.

  12. Overview of the LDEF MSIG databasing activities

    NASA Technical Reports Server (NTRS)

    Funk, Joan G.

    1995-01-01

    The Long Duration Exposure Facility (LDEF) and the accompanying experiments were composed of and contained a wide variety of materials, representing the largest collection of materials flown in low earth orbit (LEO) and retrieved for ground-based analysis to date. The results and implications of the mechanical, thermal, optical, and electrical data from these materials are the foundation on which future LEO spacecraft and missions will be built. The LDEF Materials Special Investigation Group (MSIG) has been charged with establishing and developing databases to document these materials and their performance to assure not only that the data are archived for future generations but also that the data are available to the spacecraft user community in an easily accessed, user-friendly form. This paper gives an overview of the current LDEF Materials Databases, their capabilities, and availability. An overview of the philosophy and format of a developing handbook on LEO effects on materials is also described.

  13. Aftershocks illuninate the 2011 Mineral, Virginia, earthquake causative fault zone and nearby active faults

    USGS Publications Warehouse

    Horton, Jr., J. Wright; Shah, Anjana K.; McNamara, Daniel E.; Snyder, Stephen L.; Carter, Aina M

    2015-01-01

    Deployment of temporary seismic stations after the 2011 Mineral, Virginia (USA), earthquake produced a well-recorded aftershock sequence. The majority of aftershocks are in a tabular cluster that delineates the previously unknown Quail fault zone. Quail fault zone aftershocks range from ~3 to 8 km in depth and are in a 1-km-thick zone striking ~036° and dipping ~50°SE, consistent with a 028°, 50°SE main-shock nodal plane having mostly reverse slip. This cluster extends ~10 km along strike. The Quail fault zone projects to the surface in gneiss of the Ordovician Chopawamsic Formation just southeast of the Ordovician–Silurian Ellisville Granodiorite pluton tail. The following three clusters of shallow (<3 km) aftershocks illuminate other faults. (1) An elongate cluster of early aftershocks, ~10 km east of the Quail fault zone, extends 8 km from Fredericks Hall, strikes ~035°–039°, and appears to be roughly vertical. The Fredericks Hall fault may be a strand or splay of the older Lakeside fault zone, which to the south spans a width of several kilometers. (2) A cluster of later aftershocks ~3 km northeast of Cuckoo delineates a fault near the eastern contact of the Ordovician Quantico Formation. (3) An elongate cluster of late aftershocks ~1 km northwest of the Quail fault zone aftershock cluster delineates the northwest fault (described herein), which is temporally distinct, dips more steeply, and has a more northeastward strike. Some aftershock-illuminated faults coincide with preexisting units or structures evident from radiometric anomalies, suggesting tectonic inheritance or reactivation.

  14. The northwest trending north Boquerón Bay-Punta Montalva Fault Zone; A through going active fault system in southwestern Puerto Rico

    USGS Publications Warehouse

    Roig‐Silva, Coral Marie; Asencio, Eugenio; Joyce, James

    2013-01-01

    The North Boquerón Bay–Punta Montalva fault zone has been mapped crossing the Lajas Valley in southwest Puerto Rico. Identification of the fault was based upon detailed analysis of geophysical data, satellite images, and field mapping. The fault zone consists of a series of Cretaceous bedrock faults that reactivated and deformed Miocene limestone and Quaternary alluvial fan sediments. The fault zone is seismically active (local magnitude greater than 5.0) with numerous locally felt earthquakes. Focal mechanism solutions suggest strain partitioning with predominantly east–west left-lateral displacements with small normal faults striking mostly toward the northeast. Northeast-trending fractures and normal faults can be found in intermittent streams that cut through the Quaternary alluvial fan deposits along the southern margin of the Lajas Valley, an east–west-trending 30-km-long fault-controlled depression. Areas of preferred erosion within the alluvial fan trend toward the west-northwest parallel to the onland projection of the North Boquerón Bay fault. The North Boquerón Bay fault aligns with the Punta Montalva fault southeast of the Lajas Valley. Both faults show strong southward tilting of Miocene strata. On the western end, the Northern Boquerón Bay fault is covered with flat-lying Holocene sediments, whereas at the southern end the Punta Montalva fault shows left-lateral displacement of stream drainage on the order of a few hundred meters.

  15. Tsunamigenic potential of Mediterranean fault systems and active subduction zones

    NASA Astrophysics Data System (ADS)

    Petricca, Patrizio; Babeyko, Andrey

    2016-04-01

    Since the North East Atlantic and Mediterranean Tsunami Warning System (NEAMTWS) is under development by the European scientific community, it becomes necessary to define guidelines for the characterization of the numerous parameters must be taken into account in a fair assessment of the risk. Definition of possible tectonic sources and evaluation of their potential is one of the principal issues. In this study we systematically evaluate tsunamigenic potential of up-to-now known real fault systems and active subduction interfaces in the NEAMTWS region. The task is accomplished by means of numerical modeling of tsunami generation and propagation. We have simulated all possible uniform-slip ruptures populating fault and subduction interfaces with magnitudes ranging from 6.5 up to expected Mmax. A total of 15810 individual ruptures were processed. For each rupture, a tsunami propagation scenario was computed in linear shallow-water approximation on 1-arc minute bathymetric grid (Gebco_08) implying normal reflection boundary conditions. Maximum wave heights at coastal positions (totally - 23236 points of interest) were recorded for four hours of simulation and then classified according to currently adopted warning level thresholds. The resulting dataset allowed us to classify the sources in terms of their tsunamigenic potential as well as to estimate their minimum tsunamigenic magnitude. Our analysis shows that almost every source in the Mediterranean Sea is capable to produce local tsunami at the advisory level (i.e., wave height > 20 cm) starting from magnitude values of Mw=6.6. In respect to the watch level (wave height > 50 cm), the picture is less homogeneous: crustal sources in south-west Mediterranean as well as East-Hellenic arc need larger magnitudes (around Mw=7.0) to trigger watch levels even at the nearby coasts. In the context of the regional warning (i.e., source-to-coast distance > 100 km) faults also behave more heterogeneously in respect to the minimum

  16. ANDY: A general, fault-tolerant tool for database searching oncomputer clusters

    SciTech Connect

    Smith, Andrew; Chandonia, John-Marc; Brenner, Steven E.

    2005-12-21

    Summary: ANDY (seArch coordination aND analYsis) is a set ofPerl programs and modules for distributing large biological databasesearches, and in general any sequence of commands, across the nodes of aLinux computer cluster. ANDY is compatible with several commonly usedDistributed Resource Management (DRM) systems, and it can be easilyextended to new DRMs. A distinctive feature of ANDY is the choice ofeither dedicated or fair-use operation: ANDY is almost as efficient assingle-purpose tools that require a dedicated cluster, but it runs on ageneral-purpose cluster along with any other jobs scheduled by a DRM.Other features include communication through named pipes for performance,flexible customizable routines for error-checking and summarizingresults, and multiple fault-tolerance mechanisms. Availability: ANDY isfreely available and may be obtained fromhttp://compbio.berkeley.edu/proj/andy; this site also containssupplemental data and figures and amore detailed overview of thesoftware.

  17. Structural and Lithologic Characteristics of the Wenchuan Earthquake Fault Zone and its Relationship with Seismic Activity

    NASA Astrophysics Data System (ADS)

    Wang, H.; Li, H.; Pei, J.; Li, T.; Huang, Y.; Zhao, Z.

    2010-12-01

    the older earthquake, but rather along the edge of the gouge. According to the gouge statistics of the whole fault zone, seismic events have the obvious tendency towards the foot wall, and the thickness of gouge is proportional to the activity of the fault, indicating that the width of fault zone is directly related to the number and evolution history of earthquakes . Repeated earthquakes maybe the main cause for the formation of the Longmenshan Moutains

  18. Structural Evidence for Fault Reactivation: the Active Priene-Sazli Fault Zone, Söke-Milet Basin, Western Anatolia

    NASA Astrophysics Data System (ADS)

    Sümer, Ö.; Inci, U.; Sözbilir, H.; Uzel, B.

    2009-04-01

    Western Anatolia is located at tha eastern part of the Aegean region that forms one of the most seismically active and rapidly extending regions in the world. One of the most prominent structural component of the Western Anatolia is E-W trending grabens. One of them is the Büyük Menderes Graben (BMG) showing a major change in strike ranging from E-W to NE-SW in its western end. This NE-SW oriented part of the graben is known as the Söke-Milet basin (SMB). The depression is 35 km long and 16 km wide. NW border of the basin is characterized by a morphotectonic structure namely Priene-Sazlı fault zone (PSFZ). The 16 July 1955 Söke-Balat earthquake (M=6.8) was atributed to this fault (Eyidogan and Jackson, 1985; Sengör, 1987; Altunel, 1998). However, field based kinematic studies on the PSFZ are lacking except for Gürer et. al. (2001). In this paper, we studied several reactivated fault segments of the PSFZ that are repeatedly formed under changing stress fields in order to evaluate the kinematic and stress history of the region by using structural relationships between striations and fault-plane related structures. The PSFZ consists of 5 fault segments which are en échelon arranged on the basis of mapping geological structures. The northern segments that strikes NE in the north and bends into an approximately E-W direction around Doganbey to the SW. Each segment is identified as steep opographic scarps ranging in height from a few meters to several hundred meters. Fault segments become to linkage and show breaching of the relay ramps between them. We interpret that such fault patterns have been formed in a region where extension has reactivated on pre-existing structures in an oblique sense. Evidence for this is the presence of three sets of striations each with different orientations on the same slip surface of the studied fault segments. Here, two differently oriented strike-slip slickenlines are postdated by dip-slip striations. Based on our structural

  19. Using optical dating to assess the recent activity of active faults in Hsinchu Area, northwestern Taiwan

    NASA Astrophysics Data System (ADS)

    Watanuki, T.; Chen, Y.

    2003-12-01

    The aim of this study is to evaluate the recent activity of active fault systems mapped in Hsinchu area, northwestern Taiwan. Since it is the largest site of industrial park and highly populated, it is essential to assess potential of earthquake hazards. As a result of previous work, two active fault systems (Hsinchu and Hsincheng) were identified as active. However, they have not been included in dangerous active faults on published map because Holocene offset has not been confirmed yet. Relationship between five river terraces and faults were discussed by mapping on geomorphic features; both of these thrust faults contain active anticlines in their hanging walls based on folded terraces that are composed of young alluvial deposits. Neither long-term nor short-term slip rate has been reported due to lack of age control on development timing of the terraces mentioned above. We collected samples from these terraces and open-pit trench on the highest terrace, where intercalated sandy layers are found within cobbles. As literatures optically stimulated luminescence (OSL) dating method can directly measure the burial ages of sedimentary deposits that underwent a short period of sunlight bleaching. Therefore, OSL dating is applied via single aliquot regeneration method on sand size quartz extract from our study terraces. OSL ages about 46ka and 68-75ka are obtained from 4 fluvial deposits at trenching site. We tentatively suggest that the terrace was abandoned by the main channel after 68ka and then upper strata were subsequently deposited by local small creeks. The vertical displacements cross these Hsinchu and Hsincheng active faults are ca. 90m and 70m, respectively since 68ka. Consequently, the derived long-term rates of vertical slip are 1.3 and 1.0 m/ka respectively for both of them. The details of the other age results and discussion on recent structural behavior will be presented.

  20. An update of Quaternary faults of central and eastern Oregon

    USGS Publications Warehouse

    Weldon, Ray J., II; Fletcher, D.K.; Weldon, E.M.; Scharer, K.M.; McCrory, P.A.

    2002-01-01

    This is the online version of a CD-ROM publication. We have updated the eastern portion of our previous active fault map of Oregon (Pezzopane, Nakata, and Weldon, 1992) as a contribution to the larger USGS effort to produce digital maps of active faults in the Pacific Northwest region. The 1992 fault map has seen wide distribution and has been reproduced in essentially all subsequent compilations of active faults of Oregon. The new map provides a substantial update of known active or suspected active faults east of the Cascades. Improvements in the new map include (1) many newly recognized active faults, (2) a linked ArcInfo map and reference database, (3) more precise locations for previously recognized faults on shaded relief quadrangles generated from USGS 30-m digital elevations models (DEM), (4) more uniform coverage resulting in more consistent grouping of the ages of active faults, and (5) a new category of 'possibly' active faults that share characteristics with known active faults, but have not been studied adequately to assess their activity. The distribution of active faults has not changed substantially from the original Pezzopane, Nakata and Weldon map. Most faults occur in the south-central Basin and Range tectonic province that is located in the backarc portion of the Cascadia subduction margin. These faults occur in zones consisting of numerous short faults with similar rates, ages, and styles of movement. Many active faults strongly correlate with the most active volcanic centers of Oregon, including Newberry Craters and Crater Lake.

  1. Relative tectonic activity assessment along the East Anatolian strike-slip fault, Eastern Turkey

    NASA Astrophysics Data System (ADS)

    Khalifa, Abdelrahman

    2016-04-01

    The East Anatolian transform fault is a morphologically distinct and seismically active left-lateral strike-slip fault that extends for ~ 500 km from Karlıova to the Maraş defining the boundary between the Anatolian Block and Syrian Foreland. Deformed landforms along the East Anatolian fault provide important insights into the nature of landscape development within an intra-continental strike-slip fault system. Geomorphic analysis of the East Anatolian fault using geomorphic indices including mountain front sinuosity, stream length-gradient index, drainage density, hypsometric integral, and the valley-width to valley height ratio helped differentiate the faulting into segments of differing degrees of the tectonic and geomorphic activity. Watershed maps for the East Anatolian fault showing the relative relief, incision, and maturity of basins along the fault zone help define segments of the higher seismic risk and help evaluate the regional seismic hazard. The results of the geomorphic indices show a high degree of activity, reveal each segment along the fault is active and represent a higher seismic hazard along the entire fault.

  2. Imaging the complexity of an active normal fault system: The 1997 Colfiorito (central Italy) case study

    USGS Publications Warehouse

    Chiaraluce, L.; Ellsworth, W.L.; Chiarabba, C.; Cocco, M.

    2003-01-01

    Six moderate magnitude earthquakes (5 < Mw < 6) ruptured normal fault segments of the southern sector of the North Apennine belt (central Italy) in the 1997 Colfiorito earthquake sequence. We study the progressive activation of adjacent and nearby parallel faults of this complex normal fault system using ???1650 earthquake locations obtained by applying a double-difference location method, using travel time picks and waveform cross-correlation measurements. The lateral extent of the fault segments range from 5 to 10 km and make up a broad, ???45 km long, NW trending fault system. The geometry of each segment is quite simple and consists of planar faults gently dipping toward SW with an average dip of 40??-45??. The fault planes are not listric but maintain a constant dip through the entire seismogenic volume, down to 8 km depth. We observe the activation of faults on the hanging wall and the absence of seismicity in the footwall of the structure. The observed fault segmentation appears to be due to the lateral heterogeneity of the upper crust: preexisting thrusts inherited from Neogene's compressional tectonic intersect the active normal faults and control their maximum length. The stress tensor obtained by inverting the six main shock focal mechanisms of the sequence is in agreement with the tectonic stress active in the inner chain of the Apennine, revealing a clear NE trending extension direction. Aftershock focal mechanisms show a consistent extensional kinematics, 70% of which are mechanically consistent with the main shock stress field.

  3. Late Quaternary tectonic activity and paleoseismicity of the Eastern Messinia Fault Zone, SW Peloponessus (Messinia, Greece).

    NASA Astrophysics Data System (ADS)

    Valkaniotis, Sotirios; Betzelou, Konstantina; Zygouri, Vassiliki; Koukouvelas, Ioannis; Ganas, Athanassios

    2015-04-01

    The southwestern part of Peloponnesus, Messinia and Laconia, is an area of significant tectonic activity situated near the Hellenic trench. Most of the deformation in this area is accommodated by the Eastern Messinia Fault Zone, bordering the western part of Taygetos Mt range and the west coast of Mani peninsula. The Eastern Messinia Fault Zone (EMFZ) is a complex system of primarily normal faults dipping westwards with a strike of NNW-SSE to N-S direction attaining a total length of more than 100 km from the northern Messinia plain in the north to the southern part of Mani peninsula in the south. The continuity of the EMFZ is disrupted by overlapping faults and relay ramp structures. The central part of the EMFZ, from the town of Oichalia to the city of Kalamata, was investigated by detailed field mapping of fault structures and post-alpine sediment formations together with re-evaluation of historical and modern seismicity. Several fault segments with lengths of 6 to 10 km were mapped, defined and evaluated according to their state of activity and age. Analysis of fault striation measurements along fault planes of the fault zone shows a present regime of WSW-ENE extension, in accordance with focal mechanisms from modern seismicity. Known faults like the Katsareika and Verga faults near the city of Kalamata are interpreted as older-generation faults that are re-activated (e.g. the 1986 Ms 6.0 Kalamata earthquake on Verga Fault) as part of a system of distributed deformation. New fault segments, some of them previously unmapped like the Asprohoma fault to the west of Kalamata, and offshore faults like Kitries and Kourtissa, are being assigned to the EMFZ. Moreover, a paleoseismological trench was excavated in the northern part of Pidima fault segment, one of the most prominent active segments of the central part of the EMFZ, in order to examine the paleoearthquake record of the fault system. A significant number of historical and instrumental earthquakes in the area

  4. Delineation of Urban Active Faults Using Multi-scale Gravity Analysis in Shenzhen, South China

    NASA Astrophysics Data System (ADS)

    Xu, C.; Liu, X.

    2015-12-01

    In fact, many cities in the world are established on the active faults. As the rapid urban development, thousands of large facilities, such as ultrahigh buildings, supersized bridges, railway, and so on, are built near or on the faults, which may change the balance of faults and induce urban earthquake. Therefore, it is significant to delineate effectively the faults for urban planning construction and social sustainable development. Due to dense buildings in urban area, the ordinary approaches to identify active faults, like geological survey, artificial seismic exploration and electromagnetic exploration, are not convenient to be carried out. Gravity, reflecting the mass distribution of the Earth's interior, provides a more efficient and convenient method to delineate urban faults. The present study is an attempt to propose a novel gravity method, multi-scale gravity analysis, for identifying urban active faults and determining their stability. Firstly, the gravity anomalies are decomposed by wavelet multi-scale analysis. Secondly, based on the decomposed gravity anomalies, the crust is layered and the multilayer horizontal tectonic stress is inverted. Lastly, the decomposed anomalies and the inverted horizontal tectonic stress are used to infer the distribution and stability of main active faults. For validating our method, a case study on active faults in Shenzhen City is processed. The results show that the distribution of decomposed gravity anomalies and multilayer horizontal tectonic stress are controlled significantly by the strike of the main faults and can be used to infer depths of the faults. The main faults in Shenzhen may range from 4km to 20km in the depth. Each layer of the crust is nearly equipressure since the horizontal tectonic stress has small amplitude. It indicates that the main faults in Shenzhen are relatively stable and have no serious impact on planning and construction of the city.

  5. Active faults crossing trunk pipeline routes: some important steps to avoid the disaster

    NASA Astrophysics Data System (ADS)

    Besstrashnov, Vladimir; Strom, Alexander

    2010-05-01

    Trunk pipelines that pass through tectonically active areas connecting oil and gas reservoirs with terminals and refineries cross active faults that can produce large earthquakes. Besides strong motion affecting vast areas, these earthquakes are often associated with surface faulting that provides additional hazard to pipelines. To avoid significant economic losses and environmental pollution, pipelines should be designed to sustain both effects (shaking and direct rupturing) without pipe damage and spill. Special studies aimed to provide necessary input data for the designers should be performed in the course of engineering survey. However, our experience on conducting and review of such studies for several oil and gas trunk pipelines in Russia show urgent need of more strict definition of basic conceptions and approaches used for identification and localization of these potentially hazardous tectonic features. Identification of active faults (fault zones) considered as causative faults - sources of strong motion caused by seismic waves that affect dozens kilometers of pipeline route can be done by use of both direct and indirect evidence of Late Pleistocene - Holocene activity of faults and fault zones. Since strong motion parameters can be considered as constant within the near-field zone, which width in case of large earthquake is up to dozens kilometers, accuracy of active fault location is not so critical and ±1-2 km precision provided by use of indirect evidence is acceptable. In contrast, if one have to identify and characterize zones of potential surface rupturing that require special design of the endangered pipeline section, only direct evidence of such activity can provide reliable input data for crossing design with relevant accuracy of fault location, amount and direction of displacement. Only traces of surface faults displacing Late Pleistocene - Holocene sediments and/or geomorphic features are considered as direct evidence of fault activity. Just

  6. Modelling Active Faults in Probabilistic Seismic Hazard Analysis (PSHA) with OpenQuake: Definition, Design and Experience

    NASA Astrophysics Data System (ADS)

    Weatherill, Graeme; Garcia, Julio; Poggi, Valerio; Chen, Yen-Shin; Pagani, Marco

    2016-04-01

    The Global Earthquake Model (GEM) has, since its inception in 2009, made many contributions to the practice of seismic hazard modeling in different regions of the globe. The OpenQuake-engine (hereafter referred to simply as OpenQuake), GEM's open-source software for calculation of earthquake hazard and risk, has found application in many countries, spanning a diversity of tectonic environments. GEM itself has produced a database of national and regional seismic hazard models, harmonizing into OpenQuake's own definition the varied seismogenic sources found therein. The characterization of active faults in probabilistic seismic hazard analysis (PSHA) is at the centre of this process, motivating many of the developments in OpenQuake and presenting hazard modellers with the challenge of reconciling seismological, geological and geodetic information for the different regions of the world. Faced with these challenges, and from the experience gained in the process of harmonizing existing models of seismic hazard, four critical issues are addressed. The challenge GEM has faced in the development of software is how to define a representation of an active fault (both in terms of geometry and earthquake behaviour) that is sufficiently flexible to adapt to different tectonic conditions and levels of data completeness. By exploring the different fault typologies supported by OpenQuake we illustrate how seismic hazard calculations can, and do, take into account complexities such as geometrical irregularity of faults in the prediction of ground motion, highlighting some of the potential pitfalls and inconsistencies that can arise. This exploration leads to the second main challenge in active fault modeling, what elements of the fault source model impact most upon the hazard at a site, and when does this matter? Through a series of sensitivity studies we show how different configurations of fault geometry, and the corresponding characterisation of near-fault phenomena (including

  7. Evolution and dynamics of active faults in southeastern Egyptian Western Desert

    NASA Astrophysics Data System (ADS)

    Abdeen, Mamdouh

    2016-07-01

    Remote sensing data processing and analysis together with interpretation of earthquake data that are followed by extensive field studies on some of the prevailing NS and EW striking faults indicate that these faults have an intimate relationship and were formed synchronously as a conjugate Riedel shears. Parallel to the NS and the EW faults open fractures filled with blown sand dominate the area of study. The Quaternary terraces adjacent to these faults are offset by the faults. Kinematic indicators on the NS striking faults indicate major sinistral (left-lateral) strike slip and minor dip-slip (normal) movement. On the other hand, kinematic indicators on the EW striking faults indicate major dextral (right-lateral) strike slip and minor dip-slip (normal) movement. Paleo-stress analysis of the fault striae measured on the NS and EW faults indicate that these faults were formed under NNE-SSW oriented extension. Instrumental earthquake data analysis shows a comparable extension direction to that derived from field measurements of slickenlineation. These observations indicate that the NS- and EW-striking faults are contemporaneous and are related to the Red Sea rifting that is currently active.

  8. High-resolution imagery of active faulting offshore Al Hoceima, Northern Morocco

    NASA Astrophysics Data System (ADS)

    d'Acremont, E.; Gutscher, M.-A.; Rabaute, A.; Mercier de Lépinay, B.; Lafosse, M.; Poort, J.; Ammar, A.; Tahayt, A.; Le Roy, P.; Smit, J.; Do Couto, D.; Cancouët, R.; Prunier, C.; Ercilla, G.; Gorini, C.

    2014-09-01

    Two recent destructive earthquakes in 1994 and 2004 near Al Hoceima highlight that the northern Moroccan margin is one of the most seismically active regions of the Western Mediterranean area. Despite onshore geodetic, seismological and tectonic field studies, the onshore-offshore location and extent of the main active faults remain poorly constrained. Offshore Al Hoceima, high-resolution seismic reflection and swath-bathymetry have been recently acquired during the Marlboro-2 cruise. These data at shallow water depth, close to the coast, allow us to describe the location, continuity and geometry of three active faults bounding the offshore Nekor basin. The well-expressed normal-left-lateral onshore Trougout fault can be followed offshore during several kilometers with a N171°E ± 3° trend. Westward, the Bousekkour-Aghbal normal-left-lateral onshore fault is expressed offshore with a N020°E ± 4° trending fault. The N030°E ± 2° Bokkoya fault corresponds to the western boundary of the Plio-Quaternary offshore Nekor basin in the Al Hoceima bay and seems to define an en échelon tectonic pattern with the Bousekkour-Aghbal fault. We propose that these three faults are part of the complex transtensional system between the Nekor fault and the Al-Idrissi fault zone. Our characterization of the offshore expression of active faulting in the Al Hoceima region is consistent with the geometry and nature of the active fault planes deduced from onshore geomorphological and morphotectonic analyses, as well as seismological, geodetic and geodynamic data.

  9. THE NATIONAL EXPOSURE RESEARCH LABORATORY'S CONSOLIDATED HUMAN ACTIVITY DATABASE

    EPA Science Inventory

    EPA's National Exposure Research Laboratory (NERL) has combined data from 12 U.S. studies related to human activities into one comprehensive data system that can be accessed via the Internet. The data system is called the Consolidated Human Activity Database (CHAD), and it is ...

  10. THE NATIONAL EXPOSURE RESEARCH LABORATORY'S COMPREHENSIVE HUMAN ACTIVITY DATABASE

    EPA Science Inventory

    EPA's National Exposure Research Laboratory (NERL) has combined data from nine U.S. studies related to human activities into one comprehensive data system that can be accessed via the world-wide web. The data system is called CHAD-Consolidated Human Activity Database-and it is ...

  11. Active tectonics of the Ganzi-Yushu fault in the southeastern Tibetan Plateau

    NASA Astrophysics Data System (ADS)

    Shi, Feng; He, Honglin; Densmore, Alexander L.; Li, An; Yang, Xiaoping; Xu, Xiwei

    2016-04-01

    The ongoing convergence between India and Eurasia apparently is accommodated not merely by crustal shortening in Tibet, instead also by motions along strike slip faults which are usually boundaries between tectonic blocks, especially in the Tibetan Plateau. Quantification of this strike slip faulting is fundamental for understanding the collision between India and Eurasia. Here, we use a variety of geomorphic observations to place constraints on the late Quaternary kinematics and slip rates of the Ganzi-Yushu fault, one of the significant strike-slip faults in eastern Tibet. The Ganzi-Yushu fault is an active, dominantly left-lateral strike-slip structure that can be traced continuously for up to 500 km along the northern boundary of the clockwise-rotating southeastern block of the Tibetan Plateau. We analyse geomorphic evidence for deformation, and calculate the late Quaternary slip rates at four sites along the eastern portion of the fault trace. The latest Quaternary apparent throw rates are variable along strike but are typically ~ 1 mm/a. Rates of strike-slip displacement are likely to be an order of magnitude higher, 8-11 mm/a. Trenching at two locations suggests that the active fault behaviour is dominated by strike-slip faulting and reveals several earthquake events with refined information of timing. The 2010 Mw 6.9 Yushu earthquake, which occurred on the northwestern segment of the Ganzi-Yushu fault zone, provides additional evidence for fault activity. These observations agree with GPS-derived estimates, and show that late Quaternary slip rates on the Ganzi-Yushu fault are comparable to those on other major active strike-slip faults in the eastern Tibetan Plateau.

  12. Faults and associated landslides on the Torrey Pines mesa, an expression of the active Rose Canyon fault zone, La Jolla, California

    SciTech Connect

    Rindell, A.K. )

    1993-04-01

    The Rose Canyon fault zone (RCFZ), San Diego's active NW striking right-lateral wrench, bends to the left at La Jolla, creating a poorly understood zone of transpression. North of La Jolla, continuing investigations along seacliffs and road-cuts have exposed a number of en echelon, NE striking antithetic faults previously interpreted as either E-W striking faults, landslides, and/or Eocene soft-sediment deformations. However, thrust faulting and left-lateral movement, in addition to antithetic strikes, indicates that at least one of these, the Marine Fisheries fault, is associated with the RCFZ. A graben formed by a left-step along this fault has led to land subsidence and engineering problems for the National Marine Fisheries building. In addition, progressive seacliff retreat here and at other locations is partly controlled by fault associated fractures. A cliff-face exposure of the Salk fault reveals diverging fault splays flattening to the near horizontal with movement occurring along bedding planes within the sedimentary section, creating the appearance of landsliding. Classic flower structures have also been found up to 5 km inland, along NE strikes to the shoreline exposures of the Salk and Scripps faults. Faults traces are generally obscured by urbanization and numerous ancient and/or presently active coherent landslides. Although these faults are classified as only potentially active, timing and risk of seismic movement are not well constrained. In addition, record rainfalls in San Diego County have dramatically increased landsliding potential. A well exposed dike, dated at 11 Ma (older than the Pliocene age of the RCFZ), is exposed from the seacliffs offshore towards the RCFZ. It has a significant magnetic anomaly ranging up to 450 gammas and appears to be offset by the Marine Fisheries and Scripps faults. Measuring offsets of this and other reported and suspected offshore dikes may better define total offset from both the RCFZ and antithetic faulting.

  13. Upper Pleistocene - Holocene activity of the Carrascoy Fault (Murcia, SE Spain): preliminary results from paleoseismological research.

    NASA Astrophysics Data System (ADS)

    Martin-Banda, Raquel; Garcia-Mayordomo, Julian; Insua-Arevalo, Juan M.; Salazar, Angel; Rodriguez-Escudero, Emilio; Alvarez-Gomez, Jose A.; Martinez-Diaz, Jose J.; Herrero, Maria J.; Medialdea, Alicia

    2014-05-01

    The Carrascoy Fault is located in the Internal Zones of the Betic Cordillera (Southern Spain). In particular, the Carrascoy Fault is one of the major faults forming the Eastern Betic Shear Zone, the main structure accommodating the convergence between Nubian and Eurasian plates in the westernmost Mediterranean. So far, the Carrascoy Fault has been defined as a left-lateral strike-slip fault. It extends for at least 31 km in a NE-SW trend from the village of Zeneta (Murcia) at its northeastern tip, to the Cañaricos village, controlling the northern edge of the Carrascoy Range and its linkage to the Guadalentin Depression towards the southwest. This is an area of moderate seismic activity, but densely populated, the capital of the region, Murcia, being settled very close to the fault. Hence, the knowledge of the structure and kinematics of the Carrascoy Fault is essential for assessing reliably the seismic hazard of the region. We present a detailed-scale geological and geomorphological map along the fault zone created from a LIDAR DEM combined with fieldwork, and geological and geophysical information. Furthermore, a number of trenches have been dug across the fault at different locations providing insights in the fault most recent activity as well as paleoseismic data. Preliminary results suggest that the Cararscoy Fault has recently changed its kinematic showing a near pure reverse motion. According to this, the fault can be divided into two distinct segments, the eastern one: Zeneta - Fuensanta, and the western one: Fuensanta - Cañaricos, each one having its own characteristic style and geodynamics. Some new active strands of the fault locate at the foot of the very first relief towards the North of the older strand, forming the current southern border of the Guadalentin Depression. These new faults show an increasingly reverse component westwards, so that the Fuensanta - Cañaricos segment is constituted by thrusts, which are blind at its western end

  14. Identifying active interplate and intraplate fault zones in the western Caribbean plate from seismic reflection data and the significance of the Pedro Bank fault zone in the tectonic history of the Nicaraguan Rise

    NASA Astrophysics Data System (ADS)

    Ott, B.; Mann, P.

    2015-12-01

    The offshore Nicaraguan Rise in the western Caribbean Sea is an approximately 500,000 km2 area of Precambrian to Late Cretaceous tectonic terranes that have been assembled during the Late Cretaceous formation of the Caribbean plate and include: 1) the Chortis block, a continental fragment; 2) the Great Arc of the Caribbean, a deformed Cretaceous arc, and 3) the Caribbean large igneous province formed in late Cretaceous time. Middle Eocene to Recent eastward motion of the Caribbean plate has been largely controlled by strike-slip faulting along the northern Caribbean plate boundary zone that bounds the northern margin of the Nicaraguan Rise. These faults reactivate older rift structures near the island of Jamaica and form the transtensional basins of the Honduran Borderlands near Honduras. Recent GPS studies suggest that small amount of intraplate motion within the current margin of error of GPS measurements (1-3 mm/yr) may occur within the center of the western Caribbean plate at the Pedro Bank fault zone and Hess Escarpment. This study uses a database of over 54,000 km of modern and vintage 2D seismic data, combined with earthquake data and results from previous GPS studies to define the active areas of inter- and intraplate fault zones in the western Caribbean. Intraplate deformation occurs along the 700-km-long Pedro Bank fault zone that traverses the center of the Nicaraguan Rise and reactivates the paleo suture zone between the Great Arc of the Caribbean and the Caribbean large igneous province. The Pedro Bank fault zone also drives active extension at the 200-km-long San Andres rift along the southwest margin of the Nicaraguan Rise. Influence of the Cocos Ridge indentor may be contributing to reactivation of faulting along the southwesternmost, active segment of the Hess Escarpment.

  15. Palaeoseismological evidence for Holocene activity on the Manisa Fault Zone,Western Anatolia

    NASA Astrophysics Data System (ADS)

    Özkaymak, Ç.; Sözbilir, H.; Uzel, B.; Akyüz, H. S.

    2009-04-01

    Manisa Fault Zone (MFZ) is an active structural discontinuity that is geomorphologically expressed as a trace of north-facing Quaternary fault scarps bounding the southern margin of the Manisa basin which is subsidiary to the Gediz Graben. We note that the present-day fault trace is over 50 km long from Manisa city in the northwest to the Turgutlu town in the southeast. The MFZ consists of two major sections: (i) eastern section that strikes NW-SE direction in the south and bends into an approximately E-W direction around Manisa to the northwest, (ii) an approximately 10-km-long western section that strikes approximately WNW-ESE direction from Manisa city in the east to the Akgedik town in the west. In this study, we present the geologic, geomorphologic, and palaeoseismologic observations indicating Holocene activity on the western section of the fault zone. We identify that the MFZ, at its western end, consists of three fault segments which are en échelon arranged in left step; the fault segments show evidence for linkage and breaching at the relay ramps. One of them is named as the Manastir Fault. In front of this fault, two Holocene colluvial fans older of which is uncorformity bounded are cut and displaced by the syntethic faults. Palaeoseismologic data show that the syntethic fault segments correspond to the surface ruptures of the historical earthquakes. As a result of detailed stratigraphic, sedimentologic and structural observations on the trench walls, some evidences for at least two earthquakes are recorded which are supported by radio-carbon dating. Besides this, an archaic aqueduct that were used to transport water from Emlakdere town, located on the hanging wall of the Manastir Fault, to the basin is cut and displaced by the syntethic fault egments. It is known that this archaic architecture were in use after 11. century by the Ottomans. On the basis of the mentioned data, fault segments which are belong to the western part of the Manisa Fault Zone

  16. Significance of active growth faulting on marsh accretion processes in the lower Pearl River, Louisiana

    NASA Astrophysics Data System (ADS)

    Yeager, Kevin M.; Brunner, Charlotte A.; Kulp, Mark A.; Fischer, Dane; Feagin, Rusty A.; Schindler, Kimberly J.; Prouhet, Jeremiah; Bera, Gopal

    2012-06-01

    Neotectonic processes influence marsh accretion in the lower Pearl River valley. Active growth faults are suggested by groupings of ponded river channel sections, transverse and linear river channel sections, and down- and across-valley contrasts in channel sinuosity. Seismic profiles identified several likely, fault-induced structural anomalies, two of which parallel the axes of surface distributary networks. Lithostratigraphy and biostratigraphy of six cores from across a suspected fault in the West Middle River, combined with 14C-based age control, yielded evidence of vertical offsets, indicating that this river section is on the plane of a growth fault. These data were used to estimate fault slip rates over two time intervals, 1.2 mm/y over the last 1300 yr, and 0.2 mm yr- 1 over the last 3700 yr, and delineated a sinusoidal pattern of deformation moving distally from the fault, which we interpret as resulting from fault-propagation folding. Higher rates of sediment accumulation (of the order of cm yr- 1 from 210Pbxs and 137Cs activity data) on the down-thrown side are consistent with sedimentary response to increased accommodation space, and mass-based sediment accumulation rates (g cm- 2 yr- 1) exhibit a pattern inverse of that shown by fault-driven sinusoidal deformation. We contend that near-surface growth faults are critically important to driving accretion rates and marsh response to sea-level rise.

  17. Paleoseismology of latest Pleistocene and Holocene fault activity in central Oregon

    SciTech Connect

    Pezzopane, S.K.; Weldon, R.J. II . Dept. of Geological Sciences)

    1993-04-01

    Latest Pleistocene and Holocene fault activity in Oregon concentrates along four zones that splay northward from seismically active faults along the Central Nevada and Eastern California seismic zones. The Central Oregon fault zone is one of these zones, which splays northward from dextral faults of the Walker Lane, stretching across the flanks of several ranges in south-central Oregon along a N20[degree]W trend, and ultimately merges with the Cascade volcanic arc near Newberry volcano. Aerial-photo interpretations and field investigations reveal fault scarps with, on average about 4 m, but in places as much as [approximately]10 m of vertical expression across latest Pleistocene pluvial lake deposits and geomorphic surfaces. Trenches across three different faults in the Central Oregon zone reveal evidence for multiple episodes of faulting in the form of fault-related colluvial deposits and deformed horizons which have been cut by younger fault movements. Trench exposures reveal faults with relatively steep dips and anastomosing traces, which are interpreted locally as evidence for a small oblique-slip component. Vertical offsets measured in the trenches are [approximately]2 m or more for each event. Radiocarbon analyses and preliminary tephra correlations indicate that the exposed deposits are [approximately]30,000 yr in age and younger, and record the decline of latest Pleistocene pluvial lakes. Commonly, reworked or deformed lacustrine deposits and interlayered and faulted colluvial deposits mark the second and third events back, which probably occurred in the Latest Pleistocene, at a time during low to moderate lake levels. If offsets of the past 18,000 yr are representative of the long-term average, then faults along this zone have slip rates of from 0.2 mm/yr to 0.6 mm/yr and recurrence intervals that range from [approximately]4,000 yr to 11,000 yr.

  18. Architectural evolution of the Nojima fault and identification of the activated slip layer by Kobe earthquake

    NASA Astrophysics Data System (ADS)

    Tanaka, Hidemi; Omura, Kentaro; Matsuda, Tatsuo; Ikeda, Ryuji; Kobayashi, Kenta; Murakami, Masaki; Shimada, Koji

    2007-07-01

    Evolutionary history of Nojima Fault zone is clarified by comprehensive examinations of petrological, geophysical, and geochemical characterizations on a fault zone in deep-drilled core penetrating the Nojima Fault. On the basis of the results, we reconstruct a whole depth profile of the architecture of the Nojima Fault and identify the primal slip layer activated by 1995 Kobe earthquake. The deepest part (8- to 12-km depth) of the fault zone is composed of thin slip layers of pseudotachylite (5 to 10 mm thick each, 10 cm in total). Middle depth (4- to 8-km depth) of the fault zone is composed of fault core (6 to 10 m thick), surrounded by thick (100 m thick) damage zone, characterized by zeolite precipitation. The shallow part of the fault zone (1- to 4-km depth) is composed of distributed narrow shear zones, which are characterized by combination of thin (0.5 cm thick each, 10 cm in total) ultracataclasite layers at the core of shear zones, surrounded by thicker (1 to 3 m thick) damage zones associated with carbonate precipitation. An extremely thin ultracataclasite layer (7 mm thick), activated by the 1995 Kobe earthquake, is clearly identified from numerous past slip layers, overprinting one of the shear zones, as evidenced by conspicuous geological and geophysical anomalies. The Nojima Fault zone was 10 to 100 times thicker at middle depth than that of shallower and deeper depths. The thickening would be explained as a combination of physical and chemical effects as follows. (1) Thickening of "fault core" at middle depth would be attributed to normal stress dependence on thickness of the shear zone and (2) an extreme thickening of "damage zone" in middle depth of the crust would result from the weakening of the fault zone due to super hydrostatic fluid pressure at middle depths. The high fluid pressure would result from faster sealing with low-temperature carbonate at the shallower fault zone.

  19. Determination of paleoseismic activity over a large time-scale: Fault scarp dating with 36Cl

    NASA Astrophysics Data System (ADS)

    Mozafari Amiri, Nasim; Tikhomirov, Dmitry; Sümer, Ökmen; Özkaymak, Çaǧlar; Uzel, Bora; Ivy-Ochs, Susan; Vockenhuber, Christof; Sözbilir, Hasan; Akçar, Naki

    2016-04-01

    Bedrock fault scarps are the most direct evidence of past earthquakes to reconstruct seismic activity in a large time-scale using cosmogenic 36Cl dating if built in carbonates. For this method, a surface along the fault scarp with a minimum amount of erosion is required to be chosen as an ideal target point. The section of the fault selected for sampling should cover at least two meters of the fault surface from the lower part of the scarp, where intersects with colluvium wedge. Ideally, sampling should be performed on a continuous strip along the direction of the fault slip direction. First, samples of 10 cm high and 15 cm wide are marked on the fault surface. Then, they are collected using cutters, hammer and chisel in a thickness of 3 cm. The main geometrical factors of scarp dip, scarp height, top surface dip and colluvium dip are also measured. Topographic shielding in the sampling spot is important to be estimated as well. Moreover, density of the fault scarp and colluvium are calculated. The physical and chemical preparations are carried in laboratory for AMS and chemical analysis of the samples. A Matlab® code is used for modelling of seismically active periods based on increasing production rate of 36Cl following each rupture, when a buried section of a fault is exposed. Therefore, by measuring the amount of cosmogenic 36Cl versus height, the timing of major ruptures and their offsets are determined. In our study, Manastır, Mugırtepe and Rahmiye faults in Gediz graben, Priene-Sazlı, Kalafat and Yavansu faults in Büyük Menderes graben and Ören fault in Gökava half-graben have been examined in the seismically active region of Western Turkey. Our results reconstruct at least five periods of high seismic activity during the Holocene time, three of which reveal seismic ruptures beyond the historical pre-existing data.

  20. Active fault, fault growth and segment linkage along the Janauri anticline (frontal foreland fold), NW Himalaya, India

    NASA Astrophysics Data System (ADS)

    Malik, Javed N.; Shah, Afroz A.; Sahoo, Ajit K.; Puhan, B.; Banerjee, Chiranjib; Shinde, Dattatraya P.; Juyal, Navin; Singhvi, Ashok K.; Rath, Shishir K.

    2010-03-01

    The 100 km long frontal foreland fold — the Janauri anticline in NW Himalayan foothills represents a single segment formed due to inter-linking of the southern (JS1) and the northern (JS2) Janauri segments. This anticline is a product of the fault related fold growth that facilitated lateral propagation by acquiring more length and linkage of smaller segments giving rise to a single large segment. The linked portion marked by flat-uplifted surface in the central portion represents the paleo-water gap of the Sutlej River. This area is comparatively more active in terms of tectonic activity, well justified by the occurrence of fault scarps along the forelimb and backlimb of the anticline. Occurrence of active fault scarps on either side of the anticline suggests that the slip accommodated in the frontal part is partitioned between the main frontal thrust i.e. the Himalayan Frontal Thrust (HFT) and associated back-thrust. The uplift in the piedmont zone along southern portion of Janauri anticline marked by dissected younger hill range suggests fore-landward propagation of tectonic activity along newly developed Frontal Piedmont Thrust (FPT), an imbricated emergent thrust branching out from the HFT system. We suggests that this happened because the southern segment JS1 does not linked-up with the northwestern end of Chandigarh anticline segment (CS). In the northwestern end of the Janauri anticline, due to no structural asperity the tectonic activity on HFT was taken-up by two (HF1 — in the frontal part and HF2 — towards the hinterland side) newly developed parallel active faults ( Hajipur Fault) branched from the main JS2 segment. The lateral propagation and movements along HF1 and HF2 resulted in uplift of the floodplain as well as responsible for the northward shift of the Beas River. GPR and trench investigations suggest that earthquakes during the recent past were accompanied with surface rupture. OSL (optical stimulated luminescence) dates from the trench

  1. A 665 year record of Coulomb stress changes on active faults in the central Apennines, Italy.

    NASA Astrophysics Data System (ADS)

    Wedmore, L. N. J.; Faure Walker, J.; Roberts, G.; McCaffrey, K. J. W.; Sammonds, P. R.

    2014-12-01

    Active extension in the central Apennines is accommodated on numerous 20-30km long normal faults. Over multiple earthquake cycles fault slip is controlled by viscous flow in narrow shear zones, which are below the brittle seismogenic crust and are driven by upwelling mantle beneath the central Apennines. However, on short timescales, there is evidence for clustering along strike on the north eastern set of faults in the region, with the south western faults comparatively quiet during the period of reliable historical earthquake records (since 1349 AD). In contrast, 15±3ka strain rates show no evidence of skewness towards the north eastern faults. This suggests that on short timescales, elastic loading and fault interaction may be controlling the location of earthquakes and the seismic hazard, as opposed to the view that fault activity has permanently migrated from the south west flank of the central Apennines to the north east flank. We used Coulomb stress modelling to test whether the sequence of historical earthquakes can be explained by stress triggering and elastic loading. Palaeoseismic and historical records were used to reconstruct the co-seismic static Coulomb stress changes for 27 earthquakes in central Italy from 1349-2009. 15±3ka throws measured across faults in the area were used as an analogue for the slip distributions, with the slip direction constrained by field measurements of frictional wear striae on exposed bedrock fault scarps. Interseismic loading was modelled using a shear zone rheology below the seismogenic zone of each fault; slip rates measured at the surface were used to control the rate of loading. The sensitivity of the model was explored by iterating varying slip distributions, fault kinematics and earthquake locations. We show that for sequences of clustered earthquakes that occurred on timescales of days to weeks, co-seismic static Coulomb stress transfer can explain the pattern of faulting with stress changes of 0.001-0.1 MPa

  2. Geomorphic features of active faults around the Kathmandu Valley, Nepal, and no evidence of surface rupture associated with the 2015 Gorkha earthquake along the faults

    NASA Astrophysics Data System (ADS)

    Kumahara, Yasuhiro; Chamlagain, Deepak; Upreti, Bishal Nath

    2016-04-01

    The M7.8 April 25, 2015, Gorkha earthquake in Nepal was produced by a slip on the low-angle Main Himalayan Thrust, a décollement below the Himalaya that emerges at the surface in the south as the Himalayan Frontal Thrust (HFT). The analysis of the SAR interferograms led to the interpretations that the event was a blind thrust and did not produce surface ruptures associated with the seismogenic fault. We conducted a quick field survey along four active faults near the epicentral area around the Kathmandu Valley (the Jhiku Khola fault, Chitlang fault, Kulekhani fault, Malagiri fault and Kolphu Khola fault) from July 18-22, 2015. Those faults are located in the Lesser Himalaya on the hanging side of the HFT. Based on our field survey carried out in the area where most typical tectonic landforms are developed, we confirmed with local inhabitants the lack of any new surface ruptures along these faults. Our observations along the Jhiku Khola fault showed that the fault had some definite activities during the Holocene times. Though in the past it was recognized as a low-activity thrust fault, our present survey has revealed that it has been active with a predominantly right-lateral strike-slip with thrust component. A stream dissecting a talus surface shows approximately 7-m right-lateral offset, and a charcoal sample collected from the upper part of the talus deposit yielded an age of 870 ± 30 y.B.P, implying that the talus surface formed close to 870 y.B.P. Accordingly, a single or multiple events of the fault must have occurred during the last 900 years, and the slip rate we estimate roughly is around 8 mm/year. The fault may play a role to recent right-lateral strike-slip tectonic zone across the Himalayan range. Since none of the above faults showed any relationship corresponding to the April 25 Gorkha earthquake, it is possibility that a potential risk of occurrence of large earthquakes does exist close to the Kathmandu Valley due to movements of these active

  3. Active fault tolerant control of a flexible beam

    NASA Astrophysics Data System (ADS)

    Bai, Yuanqiang; Grigoriadis, Karolos M.; Song, Gangbing

    2007-04-01

    This paper presents the development and application of an H∞ fault detection and isolation (FDI) filter and fault tolerant controller (FTC) for smart structures. A linear matrix inequality (LMI) formulation is obtained to design the full order robust H∞ filter to estimate the faulty input signals. A fault tolerant H∞ controller is designed for the combined system of plant and filter which minimizes the control objective selected in the presence of disturbances and faults. A cantilevered flexible beam bonded with piezoceramic smart materials, in particular the PZT (Lead Zirconate Titanate), in the form of a patch is used in the validation of the FDI filter and FTC controller design. These PZT patches are surface-bonded on the beam and perform as actuators and sensors. A real-time data acquisition and control system is used to record the experimental data and to implement the designed FDI filter and FTC. To assist the control system design, system identification is conducted for the first mode of the smart structural system. The state space model from system identification is used for the H∞ FDI filter design. The controller was designed based on minimization of the control effort and displacement of the beam. The residuals obtained from the filter through experiments clearly identify the fault signals. The experimental results of the proposed FTC controller show its e effectiveness for the vibration suppression of the beam for the faulty system when the piezoceramic actuator has a partial failure.

  4. Active fault systems and tectono-topographic configuration of the central Trans-Mexican Volcanic Belt

    NASA Astrophysics Data System (ADS)

    Szynkaruk, Ewa; Graduño-Monroy, Víctor Hugo; Bocco, Gerardo

    2004-07-01

    The central Trans-Mexican Volcanic Belt (TMVB) reflects the interplay between three regional fault systems: the NNW-SSE to NW-SE striking Taxco-Querétaro fault system, the NE-SW striking system, and the E-W striking Morelia-Acambay fault system. The latter is the youngest and consists of fault scarps up to 500 m high, whose formation caused structural and morphological reorganization of the region. In this paper, we investigate possible activity of the three systems within the central TMVB, and assess the role that they play in controlling the tectono-topographic configuration of the area. Our study is based on DEM-derived morphometric maps, longitudinal river profiles, geomorphologic mapping, and structural field data concerning recent faulting. We find that all three regional fault systems are active within the central TMVB, possibly with different displacement rates and/or type of motion; and that NNW-SSE and NE-SW striking faults control the major tectono-topographic elements that build up the region, which are being re-shaped by E-W striking faults. We also find that tectonic information can be deciphered from the topography of the youthful volcanic arc in question, regardless its complexity.

  5. Active low-angle (?) normal faulting along the North Lunggar rift, western Tibet

    NASA Astrophysics Data System (ADS)

    Logan, M. A.; Taylor, M. H.; Styron, R. H.; Gosse, J. C.; Ding, L.; Yang, G.

    2012-12-01

    Here we present surface exposure ages of faulted fluvial terraces using cosmogenic nuclides from the North Lunggar rift. The Lunggar rift is one of seven major north-striking rift basins accommodating east-west directed extension on the Tibetan Plateau. The Lunggar rift in west-central Tibet is divided into two distinct north and south segments based on fault geometry. The North Lunggar range is bounded on its east side by a <40 degree dipping, ~N-striking normal fault. This normal fault is considered inactive as the main detachment is unconformably overlain by unfaulted moraines and alluvial fans. Farther into the hanging wall basin, approximately 6 km eastward, several fault scarps parallel the Lunggar detachment. Locally, active faulting is distributed in the hanging wall with as many as seven normal fault scarps accommodating active east-west directed extension. Recent activity of these smaller faults is apparent from cross-cut fluvial terraces that have been uplifted by as much as 75 m. The geomorphology and fault geometry of the North Lunggar rift are consistent with high-angle normal faults that sole into a single master detachment fault at depth. A high-resolution digital elevation model constructed from real-time kinematic-GPS data has made details of the geomorphology clear and allowed for precise measurements of geomorphic offsets across the fault scarps. We estimate the surface abandonment ages using the depth profiling approach with cosmogenic nuclides. Three cosmogenic depth profiles are being analyzed in this study with each depth profile consisting of five samples at varying depths in order to account for inheritance. Site 1 is the southernmost and is on the highest uplifted fluvial terrace and is being prepared for 10Be analysis. Site 2 comprises two depth profiles on the highest and intermediate uplifted terraces, respectively. Samples at site 2 have low quartz yields and are being prepared for 36Cl analysis. Combining the fault offsets and

  6. An authoritative global database for active submarine hydrothermal vent fields

    NASA Astrophysics Data System (ADS)

    Beaulieu, Stace E.; Baker, Edward T.; German, Christopher R.; Maffei, Andrew

    2013-11-01

    The InterRidge Vents Database is available online as the authoritative reference for locations of active submarine hydrothermal vent fields. Here we describe the revision of the database to an open source content management system and conduct a meta-analysis of the global distribution of known active vent fields. The number of known active vent fields has almost doubled in the past decade (521 as of year 2009), with about half visually confirmed and others inferred active from physical and chemical clues. Although previously known mainly from mid-ocean ridges (MORs), active vent fields at MORs now comprise only half of the total known, with about a quarter each now known at volcanic arcs and back-arc spreading centers. Discoveries in arc and back-arc settings resulted in an increase in known vent fields within exclusive economic zones, consequently reducing the proportion known in high seas to one third. The increase in known vent fields reflects a number of factors, including increased national and commercial interests in seafloor hydrothermal deposits as mineral resources. The purpose of the database now extends beyond academic research and education and into marine policy and management, with at least 18% of known vent fields in areas granted or pending applications for mineral prospecting and 8% in marine protected areas.

  7. Evidence for active creep on the Alto Tiberina low angle normal fault inferred using GPS geodesy

    NASA Astrophysics Data System (ADS)

    Rick, Bennett; Jackson, Lily; Mencin, David; Casale, Gabriele

    2014-05-01

    range ~43.2ºN and 43.5ºN. We also test the regional extent of the fault by extending the fault model to the north and south of the well-imaged portion of the fault, assuming a 20º dip. We estimated fault coupling along-strike and down-dip to assess spatial variations in creep on the model fault. Our modeling suggests that the portion of the model fault in the latitude band ~43.1ºN to ~43.7ºN, encompassing the geophysically imaged ATF fault, creeps at nearly the full fault slip rate of ~2 mm/yr below a depths of 3-5 km. Our model corroborates previous inferences, suggesting active creep at shallow depth on the well-imaged portion of the ATF. However, outside of this range of latitudes, where the existence of a regional low angle normal fault is speculative, the model fault appears to be coupled to greater depths (7-8 km or deeper). Interestingly, the apparent locked zones to the north and south of the creeping zone correlate with the locations of instrumentally recorded large magnitude hanging wall earthquakes. In contrast, there have been no instrumentally recorded large magnitude earthquakes in the hanging wall overlying the creeping portion of the fault.

  8. Results From NICLAKES Survey of Active Faulting Beneath Lake Nicaragua, Central American Volcanic Arc

    NASA Astrophysics Data System (ADS)

    Funk, J.; Mann, P.; McIntosh, K.; Wulf, S.; Dull, R.; Perez, P.; Strauch, W.

    2006-12-01

    In May of 2006 we used a chartered ferry boat to collect 520 km of seismic data, 886 km of 3.5 kHz subbottom profiler data, and 35 cores from Lake Nicaragua. The lake covers an area of 7700 km2 within the active Central American volcanic arc, forms the largest lake in Central America, ranks as the twentieth largest freshwater lake in the world, and has never been previously surveyed or cored in a systematic manner. Two large stratovolcanoes occupy the central part of the lake: Concepcion is presently active, Maderas was last active less than 2000 years ago. Four zones of active faulting and doming of the lake floor were mapped with seismic and 3.5 kHz subbottom profiling. Two of the zones consist of 3-5-km-wide, 20-30-km-long asymmetric rift structures that trend towards the inactive cone of Maderas Volcano in a radial manner. The northeastern rift forms a 20-27-m deep depression on the lake bottom that is controlled by a north-dipping normal fault. The southwestern rift forms a 25-35-m deep depression controlled by a northeast-dipping normal fault. Both depressions contain mound-like features inferred to be hydrothermal deposits. Two zones of active faulting are associated with the active Concepcion stratovolcano. A 600-m-wide and 6-km-long fault bounded horst block extends westward beneath the lake from a promontory on the west side of the volcano. Like the two radial rift features of Maderas, the horst points roughly towards the active caldera of Concepcion. A second north-south zone of active faulting, which also forms a high, extends off the north coast of Concepcion and corresponds to a localized zone of folding and faulting mapped by previous workers and inferred by them to have formed by gravitational spreading of the flank of the volcano. The close spatial relation of these faults to the two volcanic cones in the lake suggests that the mechanism for faulting is a result of either crustal movements related to magma intrusion or gravitational sliding and is

  9. Mapping Active Faults and Tectonic Geomorphology offshore central California

    NASA Astrophysics Data System (ADS)

    Johnson, S. Y.; Watt, J. T.; Hart, P. E.; Sliter, R. W.; Wong, F. L.

    2009-12-01

    In June 2008, and July 2009, the USGS conducted two high-resolution, marine, seismic-reflection surveys across the continental shelf and upper slope between Piedras Blancas and Point Sal, central California, in order to better characterize regional earthquake sources. More than 1,300 km of single-channel seismic data were acquired aboard the USGS R/V Parke Snavely using a 500-joule mini-sparker source fired at a 0.5-second shot interval and recorded with a 15-meter streamer. Most tracklines were run perpendicular to the coast at 800-meter spacing, extending from the nearshore (~ 10-15 m water depth) to as far as 20 km offshore. Sub-bottom imaging varies with substrate, ranging from outstanding (100 to 150 m of penetration) in inferred Quaternary shallow marine, shelf and upper slope deposits to poor (0 to 10 m) in the Mesozoic basement rocks. Marine magnetic data were collected simultaneously on this survey, and both data sets are being integrated with new aeromagnetic data, publicly available industry seismic-reflection data, onshore geology, seismicity, and high-resolution bathymetry. Goals of the study are to map geology, structure, and sediment distribution; to document fault location, length, segmentation, shallow geometry and structure; and to identify possible sampling targets for constraining fault slip rates, earthquake recurrence, and tsunami hazard potential. The structure and tectonic geomorphology of the >100-km-long, right-lateral, Hosgri fault zone and its connections to the Los Osos, Pecho, Oceano and other northwest-trending inboard faults are the focus of this ongoing work. The Hosgri fault forms the eastern margin of the offshore Santa Maria basin and coincides in places with the outer edge of the narrow (5- to 15-km-wide), structurally complex continental shelf. The Hosgri is imaged as a relatively continuous, vertical fault zone that extends upward to the seafloor; varies significantly and rapidly along strike; and incorporates numerous

  10. Distribution of fault activity in the early stages of continental breakup: an analysis of faults and volcanic products of the Natron Basin, East African Rift, Tanzania

    NASA Astrophysics Data System (ADS)

    Muirhead, J. D.; Kattenhorn, S. A.

    2012-12-01

    Recent magmatic-tectonic crises in Ethiopia (e.g. 2005 Dabbahu rifting episode, Afar) have informed our understanding of the spatial and temporal distribution of strain in magmatic rifts transitioning to sea-floor spreading. However, the evolving contributions of magmatic and tectonic processes during the initial stages of rifting, is a subject of ongoing debate. The <5 Ma northern Tanzania and southern Kenya sectors of the East Africa Rift provide ideal locations to address this problem. We present preliminary findings from an investigation of fault structures utilizing aerial photography and satellite imagery of the ~35 km wide Natron rift-basin in northern Tanzania. Broad-scale structural mapping will be supplemented by field observations and 40Ar-39Ar dating of lava flows cut by faults to address three major aspects of magma-assisted rifting: (1) the relative timing of activity between the border fault and smaller faults distributed across the width of the rift; (2) time-averaged slip rates along rift-zone faults; and (3) the spatial distribution of faults and volcanic products, and their relative contributions to strain accommodation. Preliminary field observations suggest that the ~500 m high border fault system along the western edge of the Natron basin is either inactive or has experienced a reduced slip rate and higher recurrence interval between surface-breaking events, as evidence by a lack of recent surface-rupture along the main fault escarpments. An exception is an isolated, ~2 km-long segment of the Natron border fault, which is located in close proximity (< 5km) to the active Oldoinyo Lengai volcano. Here, ~10 m of seemingly recent throw is observed in volcaniclastic deposits. The proximity of the fault segment to Oldoinyo Lengai volcano and the localized distribution of fault-slip are consistent with magma-assisted faulting. Faults observed within the Natron basin and on the flanks of Gelai volcano, located on the eastern side of the rift, have

  11. Earthquake mechanism studies by active-fault drilling: Chi-Chi Taiwan to Wenchuan earthquakes

    NASA Astrophysics Data System (ADS)

    Togo, T.; Shimamoto, T.; Ma, S.; Noda, H.; Hirose, T.; Tanikawa, W.

    2010-12-01

    Why drill into active faults? How can such big projects be justified to society? We believe that a very important task for such projects is to understand earthquake mechanisms, i.e., to reproduce big earthquakes just occurred based on measured fault-zone properties. Post-earthquake fault-zone drilling provides rare opportunities for seeing and analyzing fault zones with minimum changes as “RAPID” group summarized its merits. Shallow and deep drilling into Chelungpu fault, that caused the 1999 Chi-Chi Taiwan earthquake, has demonstrated that reproducing an earthquake based on measured properties is becoming possible (Tanikawa and Shimamoto, 2009, JGR; Noda and Lapusta, 2009, JpGU). Another important outcome from Chelungpu drilling is finding of numerous changes in a fault zone during seismic fault motion (e.g., decomposition due to frictional heating), as highlighted by “black gouge” (many papers). Those changes can be reproduced now by high-velocity friction experiments. No so long ago, a renown geologist expressed his feeling that faults will not preserve a record of seismic slip, except for pseudotachylite (Cowan, 1999, JSG). In other words, seismic slip is of such a short duration that important changes, other than shearing deformation, will not occur in fault zones. Nojima and Chelungpu drilling has shown that this is not the case. On the other hand, seismic fault motion has been reproduced in laboratory for the last twenty years, demonstrating dramatic weakening of many natural fault gouges. We report here a set of data using fault gouge from Hongkou outcrop of Longmenshan fault system, very close to the first drilling site, under a constant slip rate and variable slip histories. Slip and velocity weakening behavior depends on slip history and can be described by an empirical equation. Importance of such experiments can be justified only by confirmation that the same processes indeed occur in natural fault zones. Integrated field and laboratory studies

  12. Spatial analysis of hypocenter to fault relationships for determining fault process zone width in Japan.

    SciTech Connect

    Arnold, Bill Walter; Roberts, Barry L.; McKenna, Sean Andrew; Coburn, Timothy C. (Abilene Christian University, Abilene, TX)

    2004-09-01

    Preliminary investigation areas (PIA) for a potential repository of high-level radioactive waste must be evaluated by NUMO with regard to a number of qualifying factors. One of these factors is related to earthquakes and fault activity. This study develops a spatial statistical assessment method that can be applied to the active faults in Japan to perform such screening evaluations. This analysis uses the distribution of seismicity near faults to define the width of the associated process zone. This concept is based on previous observations of aftershock earthquakes clustered near active faults and on the assumption that such seismic activity is indicative of fracturing and associated impacts on bedrock integrity. Preliminary analyses of aggregate data for all of Japan confirmed that the frequency of earthquakes is higher near active faults. Data used in the analysis were obtained from NUMO and consist of three primary sources: (1) active fault attributes compiled in a spreadsheet, (2) earthquake hypocenter data, and (3) active fault locations. Examination of these data revealed several limitations with regard to the ability to associate fault attributes from the spreadsheet to locations of individual fault trace segments. In particular, there was no direct link between attributes of the active faults in the spreadsheet and the active fault locations in the GIS database. In addition, the hypocenter location resolution in the pre-1983 data was less accurate than for later data. These pre-1983 hypocenters were eliminated from further analysis.

  13. Fluid involvement in the active Helike normal Fault, Gulf of Corinth, Greece

    NASA Astrophysics Data System (ADS)

    Koukouvelas, Ioannis K.; Papoulis, Dimitris

    2009-03-01

    Rock fabric and mineralogical composition from the fault core and the unaffected protolith have been used to define the role of the segmented Helike Fault to fluid flow. Sixty samples were investigated by XRD, SEM observation and SEM-EDS microanalyses. Detrital smectite, calcite, and quartz represent the mineral assemblage at the crest of the footwall block in Foniskaria sampling site. In this site smectite is enriched at the rims of the fault core. All other sampling sites located at the base of the fault scarp are characterized by detrital and newly formed minerals. Detrital minerals include plagioclase, quartz, calcite and illite in Nikolaiika sampling site, and smectite, illite, kaolinite, quartz, calcite in Selinous sampling site. In the latter sampling site erionite and cerussite are newly formed minerals with erionite considered as the hydrothermal alteration product of fluids at 80-100 °C. At the eastern fault segment illite, quartz and calcite (T13 site) corresponds to detrital minerals. Mineralogy in the fault core reflects its high permeability to down-flowing meteoric water and weak hydrothermal alteration. The rock fabric suggests mineral alignment parallel to the fault plane. Mineralogy indicates that the Aigion, Helike and Pyrgaki Faults in the Gulf of Corinth host hydrothermal activity at shallow levels.

  14. Paleoseismic investigations along a key active fault within the Gulf of Corinth, Greece

    NASA Astrophysics Data System (ADS)

    Koukouvelas, I. K.; Kokkalas, S.; Xypolias, P.

    2008-07-01

    The study of paleoseismological and archaeological excavations provide clues for the evolution of Helike Fault, located along the westernmost end of the Gulf of Corinth, that displays high activity and exerts control on the landscape. In this study we present evidence from paleoseismic trenches which revealed well defined fault strands and clear colluvial stratigraphy. We focus on the two main segments of the Helike Fault and their implications on strong earthquake activity. The Helike Fault is a major tectonic structure that influenced the evolution of ancient settlements on the Helike Delta, from the Early Bronze Age through the Byzantine period, till present times. The eastern fault segment appears to control the southern Gulf morphology, while the western segment is controlling the large Aigion basin. Interbedded organic-rich soils and gravels dominate in all trenches. Fault strands that control successive scarp-derived colluvial deposits were identified within the trenches and indicate the continuous seismic activity along the fault trace. Co-seismic offsets, open cracks filled with debris and liquefaction related deformation was also recognized. At least seven seismic events were identified inside the excavated trenches, during the last 10 ka. The estimated vertical throw along the fault segments, observed within the trenches, is on the order of 1 meter per event. Based on dating of colluvial wedges we estimated the Holocene slip rate on the Helike Fault, which shows an increase from ~0.3 mm/yr to 2 mm/yr in the last 2 ka. We consider the derived slip rates to be minimum values due to the implication of erosional effects and sediment accumulation from the upthrown block. The Helike fault appears to play a crucial role both in subsidence of the Helike delta plain and in shifting Kerynites river course that runs between the two Helike fault segments. The Helike Fault activity and the clustering of surface rupturing events on the Helike fault seems to fit well

  15. Active normal faulting along the Mt. Morrone south-western slopes (central Apennines, Italy)

    NASA Astrophysics Data System (ADS)

    Gori, Stefano; Giaccio, Biagio; Galadini, Fabrizio; Falcucci, Emanuela; Messina, Paolo; Sposato, Andrea; Dramis, Francesco

    2011-01-01

    In the present work we analyse one of the active normal faults affecting the central Apennines, i.e. the Mt. Morrone normal fault system. This tectonic structure, which comprises two parallel, NW-SE trending fault segments, is considered as potentially responsible for earthquakes of magnitude ≥ 6.5 and its last activation probably occurred during the second century AD. Structural observations performed along the fault planes have allowed to define the mainly normal kinematics of the tectonic structure, fitting an approximately N 20° trending extensional deformation. Geological and geomorphological investigations performed along the whole Mt. Morrone south-western slopes permitted us to identify the displacement of alluvial fans, attributed to Middle and Late Pleistocene by means of tephro-stratigraphic analyses and geomorphological correlations with dated lacustrine sequences, along the western fault branch. This allowed to evaluate in 0.4 ± 0.07 mm/year the slip rate of this segment. On the other hand, the lack of synchronous landforms and/or deposits that can be correlated across the eastern fault segment prevented the definition of the slip rate related to this fault branch. Nevertheless, basing on a critical review of the available literature dealing with normal fault systems evolution, we hypothesised a total slip rate of the fault system in the range of 0.4 ± 0.07 to 0.8 ± 0.09 mm/year. Moreover, basing on the length at surface of the Mt. Morrone fault system (i.e. 22-23 km) we estimated the maximum expected magnitude of an earthquake that might originate along this tectonic structure in the order of 6.6-6.7.

  16. Geomorphic Indicators and Tectonic Implications of the Active Chaochou Fault, Southern Taiwan

    NASA Astrophysics Data System (ADS)

    Hung, J.; Liao, H.

    2003-12-01

    The Chaochou Fault, lying on the easternmost edge of the Pingtung plain, is the major geologic boundary between the Slate Belt to the east and the Western Foothills to the west. According to previous studies, the Chaochou fault is a high-angle reverse fault dipping 75-80 degrees to the east. Along strike, several transverse rivers cut across the fault and form alluvial fans in the foothills, which provide unique morphotectonic features to study the activity of the Chaochou Fault. Digitized data from topographic maps of 1/5,000 to 1/25,000 scales and digital elevation data of 40m resolution were input into GIS software and analyzed to quantitatively evaluate geomorphic indicators such as hypsometric integral, stream length-gradient index and drainage basin asymmetry etc. Anomalies of these indices are further checked in the field on bedrocks, man-made structures and fold and faults, to clarify spatial variations of indicators. These, coupled with GPS data, field survey in the slate belt and uplifted terraces and subsurface seismic profiles, can further constrain spatial and temporal kinematics of the Chaochou fault and the relationship between topographic evolution and subsurface structures. Our preliminary results show that river landforms are highly related to the Chaochou Fault. Drainages were tilted to the west in response to uplifting in the east of the Chaochou Fault. Geomorphic indices indicate that the uplift rate is higher in the north and decreases progressively toward the south. The peak tectonic activity occurs in the area between the Chaochou and the Chishan Fault.

  17. Assessing fault activity in intracontinental settings: paleoseismology and geomorphology in SE Kazakhstan

    NASA Astrophysics Data System (ADS)

    Grützner, Christoph; Carson, Emily; Mackenzie, David; Elliott, Austin; Campbell, Grace; Walker, Richard; Abdrakhmatov, Kanatbek

    2016-04-01

    Earthquake recurrence intervals of active faults often exceed the time span covered by instrumental, historical, and archaeological earthquake records in continental interiors. The identification of active faults then often relies on finding the geomorphological expression of surface faulting preserved in the landscape. In rather arid areas, single earthquake scarps can be preserved for thousands of years, but erosional and depositional processes will eventually obliterate features such as fault scarps and offset geological markers. Active faults with very long intervals between surface ruptures might therefore remain undetected, which constitutes a major problem for tectonic studies and seismic hazard assessment. Here we present data from the 50 km-long 'Charyn Canyon' thrust fault in the northern Tien Shan (SE Kazakhstan). Remote sensing, Structure-from-Motion (SfM), differential GPS, field mapping, and paleoseismic trenching were used to reveal the earthquake history of this fault. Radiocarbon dating, infra-red stimulated luminescence (IRSL), and scarp diffusion modelling were used for bracketing the occurrence of paleo-earthquakes. In the paleoseismological trenches we identified two surface rupturing events within the last ~37 ka BP. The most recent earthquake took place between 3.5 - 7.3 ka BP, the penultimate event occurred between ~17-37 ka BP. We estimate magnitudes of ~MW6.5-7.3. Only the younger event has a morphological expression as a 25 km-long fault scarp of ~2 m height. This implicates that a major landscape reset occurred between these two earthquakes, most likely related to the significant climatic change that marked the end of the last glacial maximum. Similar observations from other paleoseismic investigation sites in this area support this interpretation. Our study shows that faults in the northern Tien Shan tend to break in strong earthquakes with very long recurrence intervals. As a consequence, morphological evidence for the most recent

  18. Research program on Indonesian active faults to support the national earthquake hazard assesments

    NASA Astrophysics Data System (ADS)

    Natawidjaja, D. H.

    2012-12-01

    In mid 2010 an Indonesian team of earthquake scientists published the new Indonesian probabilistic seismic hazard analysis (PSHA) map. The new PSHA map replaced the previous version that is published in 2002. One of the major challenges in developing the new map is that data for many active fault zones in Indonesia is sparse and mapped only at regional scale, thus the input fault parameters for the PSHA introduce unavoidably large uncertainties. Despite the fact that most Indonesian islands are torn by active faults, only Sumatra has been mapped and studied in sufficient details. In other areas, such as Java and Bali, the most populated regions as well as in the east Indonesian region, where tectonic plate configurations are far more complex and relative plate motions are generally higher, many major active faults and plate boundaries are not well mapped and studied. In early 2011, we have initiated a research program to study major active faults in Indonesia together with starting a new graduate study program, GREAT (Graduate Research for Earthquake and Active Tectonics), hosted by ITB (Institute of Technology bandung) and LIPI (Indonesian Institute of Sciences) in partnership with the Australia-Indonesia Facility for Disaster Reduction (AIFDR). The program include acquisition of high-resolution topography and images required for detailed fault mapping, measuring geological slip rates and locating good sites for paleoseismological studies. It is also coupled by seismological study and GPS surveys to measure geodetic slip rates. To study submarine active faults, we collect and incorporate bathymetry and marine geophysical data. The research will be carried out, in part, through masters and Ph.D student theses. in the first four year of program we select several sites for active fault studies, particulary the ones that pose greater risks to society.

  19. Continuity, segmentation and faulting type of active fault zones of the 2016 Kumamoto earthquake inferred from analyses of a gravity gradient tensor

    NASA Astrophysics Data System (ADS)

    Matsumoto, Nayuta; Yoshihiro, Hiramatsu; Sawada, Akihiro

    2016-10-01

    We analyze Bouguer anomalies in/around the focal region of the 2016 Kumamoto earthquake to examine features, such as continuity, segmentation and faulting type, of the active fault zones related to the earthquake. Several derivatives and structural parameters calculated from a gravity gradient tensor are applied to highlight the features. First horizontal and vertical derivatives, as well as a normalized total horizontal derivative, characterize well the continuous subsurface fault structure along the Futagawa fault zone. On the other hand, the Hinagu fault zone is not clearly detected by these derivatives, especially in the case of the Takano-Shirahata segment, suggesting a difference of cumulative vertical displacement between the two fault zones. The normalized total horizontal derivative and the dimensionality index indicate a discontinuity of the subsurface structure of the Hinagu fault zone, that is, a segment boundary between the Takano-Shirahata and the Hinagu segments. The aftershock distribution does not extend beyond this segment boundary. In other words, this segment boundary controls the southern end of the rupture area of the foreshock. We also recognize normal fault structures dipping to the northwest in some areas of the fault zones from estimations of dip angles.[Figure not available: see fulltext.

  20. Model-based fault detection and isolation for intermittently active faults with application to motion-based thruster fault detection and isolation for spacecraft

    NASA Technical Reports Server (NTRS)

    Wilson, Edward (Inventor)

    2008-01-01

    The present invention is a method for detecting and isolating fault modes in a system having a model describing its behavior and regularly sampled measurements. The models are used to calculate past and present deviations from measurements that would result with no faults present, as well as with one or more potential fault modes present. Algorithms that calculate and store these deviations, along with memory of when said faults, if present, would have an effect on the said actual measurements, are used to detect when a fault is present. Related algorithms are used to exonerate false fault modes and finally to isolate the true fault mode. This invention is presented with application to detection and isolation of thruster faults for a thruster-controlled spacecraft. As a supporting aspect of the invention, a novel, effective, and efficient filtering method for estimating the derivative of a noisy signal is presented.

  1. The Eastern Lower Tagus Valley Fault Zone in central Portugal: Active faulting in a low-deformation region within a major river environment

    NASA Astrophysics Data System (ADS)

    Canora, Carolina; Vilanova, Susana P.; Besana-Ostman, Glenda M.; Carvalho, João; Heleno, Sandra; Fonseca, Joao

    2015-10-01

    Active faulting in the Lower Tagus Valley, Central Portugal, poses a significant seismic hazard that is not well understood. Although the area has been affected by damaging earthquakes during historical times, only recently has definitive evidence of Quaternary surface faulting been found along the western side of the Tagus River. The location, geometry and kinematics of active faults along the eastern side of the Tagus valley have not been previously studied. We present the first results of mapping and paleoseismic analysis of the eastern strand of the Lower Tagus Valley Fault Zone (LTVFZ). Geomorphological, paleoseismological, and seismic reflection studies indicate that the Eastern LTVFZ is a left-lateral strike-slip fault. The detailed mapping of geomorphic features and studies in two paleoseismic trenches show that surface fault rupture has occurred at least six times during the past 10 ka. The river offsets indicate a minimum slip rate on the order of 0.14-0.24 mm/yr for the fault zone. Fault trace mapping, geomorphic analysis, and paleoseismic studies suggest a maximum magnitude for the Eastern LTVFZ of Mw ~ 7.3 with a recurrence interval for surface ruptures ~ 1.7 ka. At least two events occurred after 1175 ± 95 cal yr BP. Single-event displacements are unlikely to be resolved in the paleoseismic trenches, thus our observations most probably represent the minimum number of events identified in the trenches.

  2. Active Fault Near-Source Zones Within and Bordering the State of California for the 1997 Uniform Building Code

    USGS Publications Warehouse

    Petersen, M.D.; Toppozada, Tousson R.; Cao, T.; Cramer, C.H.; Reichle, M.S.; Bryant, W.A.

    2000-01-01

    The fault sources in the Project 97 probabilistic seismic hazard maps for the state of California were used to construct maps for defining near-source seismic coefficients, Na and Nv, incorporated in the 1997 Uniform Building Code (ICBO 1997). The near-source factors are based on the distance from a known active fault that is classified as either Type A or Type B. To determine the near-source factor, four pieces of geologic information are required: (1) recognizing a fault and determining whether or not the fault has been active during the Holocene, (2) identifying the location of the fault at or beneath the ground surface, (3) estimating the slip rate of the fault, and (4) estimating the maximum earthquake magnitude for each fault segment. This paper describes the information used to produce the fault classifications and distances.

  3. Connecting the Yakima fold and thrust belt to active faults in the Puget Lowland, Washington

    USGS Publications Warehouse

    Blakely, R.J.; Sherrod, B.L.; Weaver, C.S.; Wells, R.E.; Rohay, A.C.; Barnett, E.A.; Knepprath, N.E.

    2011-01-01

    High-resolution aeromagnetic surveys of the Cascade Range and Yakima fold and thrust belt (YFTB), Washington, provide insights on tectonic connections between forearc and back-arc regions of the Cascadia convergent margin. Magnetic surveys were measured at a nominal altitude of 250 m above terrain and along flight lines spaced 400 m apart. Upper crustal rocks in this region have diverse magnetic properties, ranging from highly magnetic rocks of the Miocene Columbia River Basalt Group to weakly magnetic sedimentary rocks of various ages. These distinctive magnetic properties permit mapping of important faults and folds from exposures to covered areas. Magnetic lineaments correspond with mapped Quaternary faults and with scarps identified in lidar (light detection and ranging) topographic data and aerial photography. A two-dimensional model of the northwest striking Umtanum Ridge fault zone, based on magnetic and gravity data and constrained by geologic mapping and three deep wells, suggests that thrust faults extend through the Tertiary section and into underlying pre-Tertiary basement. Excavation of two trenches across a prominent scarp at the base of Umtanum Ridge uncovered evidence for bending moment faulting possibly caused by a blind thrust. Using aeromagnetic, gravity, and paleoseismic evidence, we postulate possible tectonic connections between the YFTB in eastern Washington and active faults of the Puget Lowland. We suggest that faults and folds of Umtanum Ridge extend northwestward through the Cascade Range and merge with the Southern Whidbey Island and Seattle faults near Snoqualmie Pass 35 km east of Seattle. Recent earthquakes (MW ≤ 5.3) suggest that this confluence of faults may be seismically active today.

  4. Analysis of Landsat TM data for active tectonics: the case of the Big Chino Fault, Arizona

    NASA Astrophysics Data System (ADS)

    Salvi, Stefano

    1994-12-01

    The Big Chino Valley is a 50 km-long tectonic depression of the Basin and Range province of the South- western United States. It is bordered on the NE side by an important normal fault, the Big Chino Fault. The activity of the latter has been hypothesised on the basis of the presence of a 20 m-high fault scarp and on local geomorphological studies. Moreover, a magnitude 4.9 earthquake occurred in southern Arizona in 1976 has been attributed to this fault. The climate in the Big Chino Valley is semi-arid with average rainfall of about 400 mm per year; a very sparse vegetation cover is present, yielding a good possibility for the geo-lithologic application of remote sensing data. The analysis of the TM spectral bands shows, in the short wave infrared, a clear variation in the reflected radiance across the fault scarp. Also the available radar (SLAR) images show a marked difference in response between the two sides of the fault. An explanation of this phenomena has been found in the interaction between the geomorphic evolution, the pedological composition, and the periodic occurrence of coseismic deformation along the fault. Other effects of the latter process have been investigated on colour D- stretched images whose interpretation allowed to detect two paleoseismic events of the Big Chino Fault. This work demonstrates that important information on the seismological parameters of active faults in arid and semiarid climates can be extracted from the analysis of satellite spectral data in the visible and near -infrared.

  5. UAV's for active tectonics : case example from the Longitudinal Valley and the Chishan Faults (Southern Taiwan)

    NASA Astrophysics Data System (ADS)

    Deffontaines, Benoit; Chang, Kuo-Jen; Chan, Yu-Chang; Chen, Rou-Fei; Hsieh, Yu-Chung

    2015-04-01

    Taiwan is a case example to study active tectonics due to the active NW-SE collision of the Philippine and Eurasian Sea Plates as the whole convergence reaches 10cm/y. In order to decipher the structural active tectonics geometry, we used herein UAV's to get high resolution Digital Terrain Model (DTM) in local active tectonics key areas. Classical photo-interpretation where then developped in order to structurally interprete these data, confirmed by field studies. Two location had first been choosen in order to highlight the contribution of such high resolution DTM in SW Taiwan on the Longitudinal Valley Fault (SE Taiwan) on its southern branch from Pinting to Luyeh terraces (Pinanshan) where UAV's lead to better interprete the location of the outcropping active deformations. Combined with available GPS data and PALSAR interferometry (Deffontaines et Champenois et al., submitted) it is then possible to reconstruct the way of the present deformation in this local area. In the Pinting terraces, If the western branch of the fault correspond to an outcroping thrust fault, the eastern branch act as a a growing active anticline that may be characterized and quantified independantly. The interpretation of the UAV's high resolution DTM data on the Chishan Fault (SW Taiwan) reveals also the geometry of the outcropping active faults complex structural behaviour. If the Chishan Fault act as a thrusting in its northern tip (close to Chishan city), it acts as a right lateral strike-slip fault north of Chaoshan (Kaohsiung city) as described by Deffontaines et al. 2014. Therefore UAV's are a so useful tool to get very high resolution topographic data in Taiwan that are of great help to get the geometry of the active neotectonic structures in Taiwan.

  6. Active Crustal Faults in the Forearc Region, Guerrero Sector of the Mexican Subduction Zone

    NASA Astrophysics Data System (ADS)

    Gaidzik, Krzysztof; Ramírez-Herrera, Maria Teresa; Kostoglodov, Vladimir

    2016-10-01

    This work explores the characteristics and the seismogenic potential of crustal faults on the overriding plate in an area of high seismic hazard associated with the occurrence of subduction earthquakes and shallow earthquakes of the overriding plate. We present the results of geomorphic, structural, and fault kinematic analyses conducted on the convergent margin between the Cocos plate and the forearc region of the overriding North American plate, within the Guerrero sector of the Mexican subduction zone. We aim to determine the active tectonic processes in the forearc region of the subduction zone, using the river network pattern, topography, and structural data. We suggest that in the studied forearc region, both strike-slip and normal crustal faults sub-parallel to the subduction zone show evidence of activity. The left-lateral offsets of the main stream courses of the largest river basins, GPS measurements, and obliquity of plate convergence along the Cocos subduction zone in the Guerrero sector suggest the activity of sub-latitudinal left-lateral strike-slip faults. Notably, the regional left-lateral strike-slip fault that offsets the Papagayo River near the town of La Venta named "La Venta Fault" shows evidence of recent activity, corroborated also by GPS measurements (4-5 mm/year of sinistral motion). Assuming that during a probable earthquake the whole mapped length of this fault would rupture, it would produce an event of maximum moment magnitude Mw = 7.7. Even though only a few focal mechanism solutions indicate a stress regime relevant for reactivation of these strike-slip structures, we hypothesize that these faults are active and suggest two probable explanations: (1) these faults are characterized by long recurrence period, i.e., beyond the instrumental record, or (2) they experience slow slip events and/or associated fault creep. The analysis of focal mechanism solutions of small magnitude earthquakes in the upper plate, for the period between 1995

  7. Geometry, kinematics and slip rate along the Mosha active fault, Central Alborz, Iran

    NASA Astrophysics Data System (ADS)

    Ritz, J.-F.; Pics Geological Team

    2003-04-01

    The Mosha fault is one of the major active fault in Central Alborz as shown by its strong historical seismicity and its clear morphological signature. Situated at the vicinity of Tehran city, this ~150 km long ~N100°E trending fault represents an important potential seismic source that threatens the Iranian metropolis. In the framework of an Iranian-French joint research program (PICS) devoted to seismic hazard assessment in the Tehran region, we undertook a morphotectonic (determination of the cumulative displacements and the ages of offset morphologic markers) and paleoseismic (determination of the ages and magnitudes of ancient events) study along the Mosha fault. Our objectives are the estimation of the long-term slip rate (Upper Pleistocene-Holocene) and the mean recurrence interval of earthquakes along the different segments of the fault. Our investigations within the Tar Lake valley, along the eastern part of the fault potentially the site of the 1665 (VII, 6.5) historical earthquake - allows us to calculate a preliminary 2 ± 0.1 mm/yr minimum left lateral slip rate. If we assume a characteristic coseismic average displacement comprised between 0.35 m (Mw 6.5) and 1.2 m (Mw 7.1) calculated from Wells &Coppersmith’s functions (1994) and taking the moment magnitudes attributed to the 1665 and 1830 earthquakes (e.g. Berberian &Yeats, 2001) the mean maximum recurrence intervals along this segment of the Mosha fault are comprised between 160 and 620 yrs.

  8. Eocene activity on the Western Sierra Fault System and its role incising Kings Canyon, California

    NASA Astrophysics Data System (ADS)

    Sousa, Francis J.; Farley, Kenneth A.; Saleeby, Jason; Clark, Marin

    2016-04-01

    Combining new and published apatite (U-Th)/He and apatite 4He/3He data from along the Kings River canyon, California we rediscover a west-down normal fault on the western slope of the southern Sierra Nevada, one of a series of scarps initially described by Hake (1928) which we call the Western Sierra Fault System. Integrating field observations with apatite (U-Th)/He data, we infer a single fault trace 30 km long, and constrain the vertical offset across this fault to be roughly a kilometer. Thermal modeling of apatite 4He/3He data documents a pulse of footwall cooling near the fault and upstream in the footwall at circa 45-40 Ma, which we infer to be the timing of a kilometer-scale incision pulse resulting from the fault activity. In the context of published data from the subsurface of the Sacramento and San Joaquin Valleys, our data from the Western Sierra Fault System suggests an Eocene tectonic regime dominated by low-to-moderate magnitude extension, surface uplift, and internal structural deformation of the southern Sierra Nevada and proximal Great Valley forearc.

  9. Southern San Andreas Fault evaluation field activity: approaches to measuring small geomorphic offsets--challenges and recommendations for active fault studies

    USGS Publications Warehouse

    Scharer, Katherine M.; Salisbury, J. Barrett; Arrowsmith, J. Ramon; Rockwell, Thomas K.

    2014-01-01

    In southern California, where fast slip rates and sparse vegetation contribute to crisp expression of faults and microtopography, field and high‐resolution topographic data (<1  m/pixel) increasingly are used to investigate the mark left by large earthquakes on the landscape (e.g., Zielke et al., 2010; Zielke et al., 2012; Salisbury, Rockwell, et al., 2012, Madden et al., 2013). These studies measure offset streams or other geomorphic features along a stretch of a fault, analyze the offset values for concentrations or trends along strike, and infer that the common magnitudes reflect successive surface‐rupturing earthquakes along that fault section. Wallace (1968) introduced the use of such offsets, and the challenges in interpreting their “unique complex history” with offsets on the Carrizo section of the San Andreas fault; these were more fully mapped by Sieh (1978) and followed by similar field studies along other faults (e.g., Lindvall et al., 1989; McGill and Sieh, 1991). Results from such compilations spurred the development of classic fault behavior models, notably the characteristic earthquake and slip‐patch models, and thus constitute an important component of the long‐standing contrast between magnitude–frequency models (Schwartz and Coppersmith, 1984; Sieh, 1996; Hecker et al., 2013). The proliferation of offset datasets has led earthquake geologists to examine the methods and approaches for measuring these offsets, uncertainties associated with measurement of such features, and quality ranking schemes (Arrowsmith and Rockwell, 2012; Salisbury, Arrowsmith, et al., 2012; Gold et al., 2013; Madden et al., 2013). In light of this, the Southern San Andreas Fault Evaluation (SoSAFE) project at the Southern California Earthquake Center (SCEC) organized a combined field activity and workshop (the “Fieldshop”) to measure offsets, compare techniques, and explore differences in interpretation. A thorough analysis of the measurements from the

  10. Active faults, stress field and plate motion along the Indo-Eurasian plate boundary

    NASA Astrophysics Data System (ADS)

    Nakata, Takashi; Otsuki, Kenshiro; Khan, S. H.

    1990-09-01

    The active faults of the Himalayas and neighboring areas are direct indicators of Recent and sub-Recent crustal movements due to continental collision between the Indian and Eurasian plates. The direction of the maximum horizontal shortening or horizontal compressive stress axes deduced from the strike and type of active faulting reveals a characteristic regional stress field along the colliding boundary. The trajectories of the stress axes along the transcurrent faults and the Eastern Himalayan Front, are approximately N-S, parallel to the relative motion of the two plates. However, along the southern margin of the Eurasian plate, they are NE-SW in the Western Himalayan Front and NW-SE to E-W in the Kirthar-Sulaiman Front, which is not consistent with the direction of relative plate motion. A simple model is proposed in order to explain the regional stress pattern. In this model, the tectonic sliver between the transcurrent faults and the plate margin, is dragged northward by the oblique convergence of the Indian plate. Thus, the direction of relative motion between the tectonic sliver and the Indian plate changes regionally, causing local compressive stress fields. Judging from the long-term slip rates along the active faults, the relative motion between the Indian and Eurasian plates absorbed in the colliding zone is about one fourth of its total amount; the rest may be consumed along the extensive strike-slip faults in Tibet and China.

  11. Contradicting Estimates of Location, Geometry, and Rupture History of Highly Active Faults in Central Japan

    NASA Astrophysics Data System (ADS)

    Okumura, K.

    2011-12-01

    Accurate location and geometry of seismic sources are critical to estimate strong ground motion. Complete and precise rupture history is also critical to estimate the probability of the future events. In order to better forecast future earthquakes and to reduce seismic hazards, we should consider over all options and choose the most likely parameter. Multiple options for logic trees are acceptable only after thorough examination of contradicting estimates and should not be a result from easy compromise or epoche. In the process of preparation and revisions of Japanese probabilistic and deterministic earthquake hazard maps by Headquarters for Earthquake Research Promotion since 1996, many decisions were made to select plausible parameters, but many contradicting estimates have been left without thorough examinations. There are several highly-active faults in central Japan such as Itoigawa-Shizuoka Tectonic Line active fault system (ISTL), West Nagano Basin fault system (WNBF), Inadani fault system (INFS), and Atera fault system (ATFS). The highest slip rate and the shortest recurrence interval are respectively ~1 cm/yr and 500 to 800 years, and estimated maximum magnitude is 7.5 to 8.5. Those faults are very hazardous because almost entire population and industries are located above the fault within tectonic depressions. As to the fault location, most uncertainties arises from interpretation of geomorphic features. Geomorphological interpretation without geological and structural insight often leads to wrong mapping. Though non-existent longer fault may be a safer estimate, incorrectness harm reliability of the forecast. Also this does not greatly affect strong motion estimates, but misleading to surface displacement issues. Fault geometry, on the other hand, is very important to estimate intensity distribution. For the middle portion of the ISTL, fast-moving left-lateral strike-slip up to 1 cm/yr is obvious. Recent seismicity possibly induced by 2011 Tohoku

  12. Modeling of fault activation and seismicity by injection directly into a fault zone associated with hydraulic fracturing of shale-gas reservoirs

    DOE PAGES

    Rutqvist, Jonny; Rinaldi, Antonio P.; Cappa, Frédéric; Moridis, George J.

    2015-03-01

    We conducted three-dimensional coupled fluid-flow and geomechanical modeling of fault activation and seismicity associated with hydraulic fracturing stimulation of a shale-gas reservoir. We simulated a case in which a horizontal injection well intersects a steeply dip- ping fault, with hydraulic fracturing channeled within the fault, during a 3-hour hydraulic fracturing stage. Consistent with field observations, the simulation results show that shale-gas hydraulic fracturing along faults does not likely induce seismic events that could be felt on the ground surface, but rather results in numerous small microseismic events, as well as aseismic deformations along with the fracture propagation. The calculated seismicmore » moment magnitudes ranged from about -2.0 to 0.5, except for one case assuming a very brittle fault with low residual shear strength, for which the magnitude was 2.3, an event that would likely go unnoticed or might be barely felt by humans at its epicenter. The calculated moment magnitudes showed a dependency on injection depth and fault dip. We attribute such dependency to variation in shear stress on the fault plane and associated variation in stress drop upon reactivation. Our simulations showed that at the end of the 3-hour injection, the rupture zone associated with tensile and shear failure extended to a maximum radius of about 200 m from the injection well. The results of this modeling study for steeply dipping faults at 1000 to 2500 m depth is in agreement with earlier studies and field observations showing that it is very unlikely that activation of a fault by shale-gas hydraulic fracturing at great depth (thousands of meters) could cause felt seismicity or create a new flow path (through fault rupture) that could reach shallow groundwater resources.« less

  13. Modeling of fault activation and seismicity by injection directly into a fault zone associated with hydraulic fracturing of shale-gas reservoirs

    SciTech Connect

    Rutqvist, Jonny; Rinaldi, Antonio P.; Cappa, Frédéric; Moridis, George J.

    2015-03-01

    We conducted three-dimensional coupled fluid-flow and geomechanical modeling of fault activation and seismicity associated with hydraulic fracturing stimulation of a shale-gas reservoir. We simulated a case in which a horizontal injection well intersects a steeply dip- ping fault, with hydraulic fracturing channeled within the fault, during a 3-hour hydraulic fracturing stage. Consistent with field observations, the simulation results show that shale-gas hydraulic fracturing along faults does not likely induce seismic events that could be felt on the ground surface, but rather results in numerous small microseismic events, as well as aseismic deformations along with the fracture propagation. The calculated seismic moment magnitudes ranged from about -2.0 to 0.5, except for one case assuming a very brittle fault with low residual shear strength, for which the magnitude was 2.3, an event that would likely go unnoticed or might be barely felt by humans at its epicenter. The calculated moment magnitudes showed a dependency on injection depth and fault dip. We attribute such dependency to variation in shear stress on the fault plane and associated variation in stress drop upon reactivation. Our simulations showed that at the end of the 3-hour injection, the rupture zone associated with tensile and shear failure extended to a maximum radius of about 200 m from the injection well. The results of this modeling study for steeply dipping faults at 1000 to 2500 m depth is in agreement with earlier studies and field observations showing that it is very unlikely that activation of a fault by shale-gas hydraulic fracturing at great depth (thousands of meters) could cause felt seismicity or create a new flow path (through fault rupture) that could reach shallow groundwater resources.

  14. Delineation of Active Basement Faults in the Eastern Tennessee and Charlevoix Intraplate Seismic Zones

    NASA Astrophysics Data System (ADS)

    Powell, C. A.; Langston, C. A.; Cooley, M.

    2013-12-01

    Recognition of distinct, seismogenic basement faults within the eastern Tennessee seismic zone (ETSZ) and the Charlevoix seismic zone (CSZ) is now possible using local earthquake tomography and datasets containing a sufficiently large number of earthquakes. Unlike the New Madrid seismic zone where seismicity clearly defines active fault segments, earthquake activity in the ETSZ and CSZ appears diffuse. New arrival time inversions for hypocenter relocations and 3-D velocity variations using datasets in excess of 1000 earthquakes suggest the presence of distinct basement faults in both seismic zones. In the ETSZ, relocated hypocenters align in near-vertical segments trending NE-SW, parallel to the long dimension of the seismic zone. Earthquakes in the most seismogenic portion of the ETSZ delineate another set of near-vertical faults trending roughly E-ESE. These apparent trends and steep dips are compatible with ETSZ focal mechanism solutions. The solutions are remarkably consistent and indicate strike-slip motion along the entire length of the seismic zone. Relocated hypocenter clusters in the CSZ define planes that trend and dip in directions that are compatible with known Iapitan rift faults. Seismicity defining the planes becomes disrupted where the rift faults encounter a major zone of deformation produced by a Devonian meteor impact. We will perform a joint statistical analysis of hypocenter alignments and focal mechanism nodal plane orientations in the ETSZ and the CSZ to determine the spatial orientations of dominant seismogenic basement faults. Quantifying the locations and dimensions of active basement faults will be important for seismic hazard assessment and for models addressing the driving mechanisms for these intraplate zones.

  15. Paper 58714 - Exploring activated faults hydromechanical processes from semi-controled field injection experiments

    NASA Astrophysics Data System (ADS)

    Guglielmi, Y.; Cappa, F.; Nussbaum, C.

    2015-12-01

    The appreciation of the sensitivity of fractures and fault zones to fluid-induced-deformations in the subsurface is a key question in predicting the reservoir/caprock system integrity around fluid manipulations with applications to reservoir leakage and induced seismicity. It is also a question of interest in understanding earthquakes source, and recently the hydraulic behavior of clay faults under a potential reactivation around nuclear underground depository sites. Fault and fractures dynamics studies face two key problems (1) the up-scaling of laboratory determined properties and constitutive laws to the reservoir scale which is not straightforward when considering faults and fractures heterogeneities, (2) the difficulties to control both the induced seismicity and the stimulated zone geometry when a fault is reactivated. Using instruments dedicated to measuring coupled pore pressures and deformations downhole, we conducted field academic experiments to characterize fractures and fault zones hydromechanical properties as a function of their multi-scale architecture, and to monitor their dynamic behavior during the earthquake nucleation process. We show experiments on reservoir or cover rocks analogues in underground research laboratories where experimental conditions can be optimized. Key result of these experiments is to highlight how important the aseismic fault activation is compared to the induced seismicity. We show that about 80% of the fault kinematic moment is aseismic and discuss the complex associated fault friction coefficient variations. We identify that the slip stability and the slip velocity are mainly controlled by the rate of the permeability/porosity increase, and discuss the conditions for slip nucleation leading to seismic instability.

  16. GPR measurements to assess the Emeelt active fault's characteristics in a highly smooth topographic context, Mongolia

    NASA Astrophysics Data System (ADS)

    Dujardin, Jean-Rémi; Bano, Maksim; Schlupp, Antoine; Ferry, Matthieu; Munkhuu, Ulziibat; Tsend-Ayush, Nyambayar; Enkhee, Bayarsaikhan

    2014-07-01

    To estimate the seismic hazard, the geometry (dip, length and orientation) and the dynamics (type of displacements and amplitude) of the faults in the area of interest need to be understood. In this paper, in addition to geomorphologic observations, we present the results of two ground penetrating radar (GPR) campaigns conducted in 2010 and 2011 along the Emeelt fault in the vicinity of Ulaanbaatar, capital of Mongolia, located in an intracontinental region with low deformation rate that induces long recurrence time between large earthquakes. As the geomorphology induced by the fault activity has been highly smoothed by erosion processes since the last event, the fault location and geometry is difficult to determine precisely. However, by using GPR first, a non-destructive and fast investigation, the fault and the sedimentary deposits near the surface can be characterized and the results can be used for the choice of trench location. GPR was performed with a 50 MHz antenna over 2-D lines and with a 500 MHz antenna for pseudo-3-D surveys. The 500 MHz GPR profiles show a good consistency with the trench observations, dug next to the pseudo-3-D surveys. The 3-D 500 MHz GPR imaging of a palaeochannel crossed by the fault allowed us to estimate its lateral displacement to be about 2 m. This is consistent with a right lateral strike-slip displacement induced by an earthquake around magnitude 7 or several around magnitude 6. The 2-D 50 MHz profiles, recorded perpendicular to the fault, show a strong reflection dipping to the NE, which corresponds to the fault plane. Those profiles provided complementary information on the fault such as its location at shallow depth, its dip angle (from 23° to 35°) and define its lateral extension.

  17. Lake Clark fault, assessment of tectonic activity based on reconnaissance mapping of glacial deposits, northwestern Cook Inlet Alaska

    NASA Astrophysics Data System (ADS)

    Reger, R. D.; Koehler, R. D.

    2009-12-01

    The Lake Clark fault extends ~247 km from the vicinity of Lake Clark in the Alaska-Aleutian Range batholith northeastward to the Castle Mountain fault along the northern margin of Cook Inlet. Documented Tertiary deformation along the fault includes dextral offsets (5-26 km) and north-side-up reverse displacements (500-1,000 m). The fault is along strike with the Holocene-active Castle Mountain fault and adjacent to the active northern Cook Inlet fold belt. As part of the STATEMAP program, the State of Alaska has begun a 2-year geologic mapping project in the vicinity of the Lake Clark fault, including assessment of Quaternary fault activity and its role in accommodating deformation in the Aleutian forearc. Here we present preliminary Quaternary mapping and tectonic geomorphic observations aimed at assessing the fault activity. Between the Beluga and Chakachatna rivers, large lateral moraines of the late Wisconsinan Naptowne glaciation cross the fault and are not displaced. In the vicinity of Lone Ridge, the fault is expressed as a ~25-m southeast-facing scarp in bedrock associated with springs and vertically offset Stage 4 or 6 moraines. In the Chuitna River drainage basin beyond the Naptowne ice limit, the fault extends across a fairly flat plateau with drumlins and ice-stagnation deposits related to Stage 4 or 6 glaciation. There the fault is expressed by subtle vegetation and tonal lineaments on air photos; however, scarps and lateral offsets were not observed. Stream profiles perpendicular to the fault along the Chuitna River and Chuitna Creek have convex profiles that could be related to tectonic folding. Our observations indicate that this part of the Lake Clark fault may be Quaternary active, but has been relatively quiescent in the late Pleistocene. Thus, blind thrust faults associated with the northern Cook Inlet fold belt may accommodate the majority of the tectonic deformation in this part of the Aleutian forearc. This information is applicable to

  18. EADB: An Estrogenic Activity Database for Assessing Potential Endocrine Activity

    EPA Science Inventory

    Endocrine-active chemicals can potentially have adverse effects on both humans and wildlife. They can interfere with the body’s endocrine system through direct or indirect interactions with many protein targets. Estrogen receptors (ERs) are one of the major targets, and many ...

  19. Active faults and seismogenic models for the Urumqi city, Xinjiang Autonomous Region, China

    NASA Astrophysics Data System (ADS)

    Li, Yingzhen; Yu, Yang; Shen, Jun; Shao, Bo; Qi, Gao; Deng, Mei

    2016-06-01

    We have studied the characteristics of the active faults and seismicity in the vicinity of Urumqi city, the capital of Xinjiang Autonomous Region, China, and have proposed a seismogenic model for the assessment of earthquake hazard in this area. Our work is based on an integrated analysis of data from investigations of active faults at the surface, deep seismic reflection soundings, seismic profiles from petroleum exploration, observations of temporal seismic stations, and the precise location of small earthquakes. We have made a comparative study of typical seismogenic structures in the frontal area of the North Tianshan Mountains, where Urumqi city is situated, and have revealed the primary features of the thrust-fold-nappe structure there. We suggest that Urumqi city is comprised two zones of seismotectonics which are interpreted as thrust-nappe structures. The first is the thrust nappe of the North Tianshan Mountains in the west, consisting of the lower (root) thrust fault, middle detachment, and upper fold-uplift at the front. Faults active in the Pleistocene are present in the lower and upper parts of this structure, and the detachment in the middle spreads toward the north. In the future, M7 earthquakes may occur at the root thrust fault, while the seismic risk of frontal fold-uplift at the front will not exceed M6.5. The second structure is the western flank of the arc-like Bogda nappe in the east, which is also comprised a root thrust fault, middle detachment, and upper fold-uplift at the front, of which the nappe stretches toward the north; several active faults are also developed in it. The fault active in the Holocene is called the South Fukang fault. It is not in the urban area of Urumqi city. The other three faults are located in the urban area and were active in the late Pleistocene. In these cases, this section of the nappe structure near the city has an earthquake risk of M6.5-7. An earthquake M S6.6, 60 km east to Urumqi city occurred along the

  20. Holocene activity of the Rose Canyon fault zone in San Diego, California

    NASA Astrophysics Data System (ADS)

    Lindvall, Scott C.; Rockwell, Thomas K.

    1995-12-01

    The Rose Canyon fault zone in San Diego, California, has many well-expressed geomorphic characteristics of an active strike-slip fault, including scarps, offset and deflected drainages and channel walls, pressure ridges, a closed depression, and vegetation lineaments. Geomorphic expression of the fault zone from Mount Soledad south to Mission Bay indicates that the Mount Soledad strand is the most active. A network of trenches excavated across the Mount Soledad strand in Rose Creek demonstrate a minimum of 8.7 m of dextral slip in a distinctive early to middle Holocene gravel-filled channel that crosses the fault zone. The gravel-filled channel was preserved within and east of the fault but was removed west of the fault zone by erosion or possibly grading during development. Consequently, the actual displacement of the channel could be greater than 8.7 m. Radiocarbon dates on detrital charcoal recovered from the sediments beneath the channel yield a maximum calibrated age of about 8.1±0.2 kyr. The minimum amount of slip along with the maximum age yield a minimum slip rate of 1.07±0.03 mm/yr on this strand of the Rose Canyon fault zone for much of Holocene time. Other strands of the Rose Canyon fault zone, which are east and west of our site, may also have Holocene activity. Based on an analysis of the geomorphology of fault traces within the Rose Canyon fault zone, along with the results of our trenching study, we estimate the maximum likely slip rate at about 2 mm/yr and a best estimate of about 1.5 mm/yr. Stratigraphie evidence of at least three events is present during the past 8.1 kyr. The most recent surface rupture displaces the modern A horizon (topsoil), suggesting that this event probably occurred within the past 500 years. Stratigraphie and structural relationships also indicate the occurrence of a scarp-forming event at about 8.1 kyr, prior to deposition of the gravel-filled channel that was used as a piercing line. A third event is indicated by the

  1. Active faulting in northern Chile: ramp stacking and lateral decoupling along a subduction plate boundary?

    NASA Astrophysics Data System (ADS)

    Armijo, Rolando; Thiele, Ricardo

    1990-04-01

    Two large features parallel to the coastline of northern Chile have long been suspected to be the sites of young or active deformation: (1) The 700-km long Coastal Scarp, with average height (above sea level) of about 1000 m; (2) The Atacama Fault zone, that stretches linearly for about 1100 km at an average distance of 30-50 km from the coastline. New field observations combined with extensive analysis of aerial photographs demonstrate that both the Coastal Scarp and the Atacama Fault are zones of Quaternary and current fault activity. Little-degraded surface breaks observed in the field indicate that these fault zones have recently generated large earthquakes ( M = 7-8). Normal fault offsets observed in marine terraces in the Coastal Scarp (at Mejillones Peninsula) require tectonic extension roughly orthogonal to the compressional plate boundary. Strike-slip offsets of drainage observed along the Salar del Carmen and Cerro Moreno faults (Atacama Fault system) imply left-lateral displacements nearly parallel to the plate boundary. The left-lateral movement observed along the Atacama Fault zone may be a local consequence of E-W extension along the Coastal Scarp. But if also found everywhere along strike, left-lateral decoupling along the Atacama Fault zone would be in contradiction with the right lateral component of Nazca-South America motion predicted by models of present plate kinematics. Clockwise rotation with left-lateral slicing of the Andean orogen south of the Arica bend is one way to resolve this contradiction. The Coastal Scarp and the Atacama Fault zone are the most prominent features with clear traces of activity within the leading edge of continental South America. The great length and parallelism of these features with the subduction zone suggest that they may interact with the subduction interface at depth. We interpret the Coastal Scarp to be a west-dipping normal fault or flexure and propose that it is located over an east-dipping ramp stack at

  2. Unravelling the competing influence of regional uplift and active normal faulting in SW Calabria, Italy

    NASA Astrophysics Data System (ADS)

    Whittaker, Alex; Roda Boluda, Duna; Boulton, Sarah; Erhardt, Sebastian

    2015-04-01

    The Neogene geological and geomorphological evolution of Southern Italy is complex and is fundamentally controlled by the subduction of the Ionian slab along the Apennine belt from the Calabrian Arc, and back-arc extension driven by trench rollback. In the area of Calabria and the Straits of Messina the presence of (i) uplifted, deformed and dissected basin sediments and marine terraces, ranging in age from the early to mid-Pleistocene and (ii) seismicity associated with NE-SW normal faults that have well-developed footwall topography and triangular facets have led workers to suggest that both significant regional uplift and extensional faulting in SW Calabria have played a role in generating relief in the area since the mid Pleistocene. However, there is considerable uncertainty in the rates of total surface uplift relative to sea level in both time and space, and the relative partitioning of this uplift between a mantle-driven regional signal, potentially related to a slab tear, and the active extensional structures. Additionally, despite the widespread recognition of normal faults in Calabria to which historical earthquakes are often linked, there is much less agreement on (i) which ones are active and for what length of time; (ii) how the faults interact; and (iii) what their throw and throw rates are. In particular, the ability to resolve both regional uplift and normal faulting in SW Calabria is essential in order to fully understand the tectonic history of the region, while an understanding of location and slip rate of active faults, in an area where the population numbers more than two million people, is essential to assess regional seismic hazards. Here we address these important questions using a combination of tectonic geomorphology and structural geology. We critically examine existing constraints on the rates and distribution of active normal faulting and regional uplift in the area, and we derive new constraints on the along-strike variation in throw

  3. Exhumed analogues of seismically active carbonate-bearing thrusts: fault architecture and deformation mechanisms

    NASA Astrophysics Data System (ADS)

    Tesei, T.; Collettini, C.; Viti, C.; Barchi, M. R.

    2012-12-01

    In May 2012 a M = 5.9 earthquake followed by a long aftershock sequence struck the Northern Italy. The sequence occurred at 4-10 km depth within the active front of Northern Apennines Prism and the major events nucleate within, or propagate through, a thick sequence of carbonates. In an inner sector of the Northern Apennines, ancient carbonate-bearing thrusts exposed at the surface, represent exhumed analogues of structures generating seismicity in the active front. Here we document fault architecture and deformation mechanisms of three regional carbonate bearing thrusts with displacement of several kilometers and exhumation in the range of 1-4 km. Fault zone structure and deformation mechanisms are controlled by the lithology of the faulted rocks. In layered limestones and marly-limestones the fault zone is up to 200 m thick and is characterized by intense pressure solution. In massive limestones the deformation generally occurs along thin and sharp slip planes that are in contact with fault portions affected by either cataclasis or pressure solution. SEM and TEM observations show that pressure solution surfaces, made of smectite lamellae, with time tend to form an interconnected network affected by frictional sliding. Sharp slipping planes along massive limestones show localization along Y shear planes that separate an extremely comminuted cataclasites from an almost undeformed protolith. The comparison of the three shear zones depicts a fault zone structure extremely heterogeneous as the result of protolith lithology, geometrical complexities and the presence of inherited structures. We observe the competition between brittle (cataclasis, distributed frictional sliding along phyllosilicates and extremely localized slip within carbonates) and pressure solution processes, that suggest a multi-mode of slip behaviour. Extreme localization along carbonate-bearing Y shear planes is our favorite fault zone feature representing past seismic ruptures along the studied

  4. Slip Rates of Main Active Fault Zones Through Turkey Inferred From GPS Observations

    NASA Astrophysics Data System (ADS)

    Ozener, H.; Aktug, B.; Dogru, A.; Tasci, L.; Acar, M.; Emre, O.; Yilmaz, O.; Turgut, B.; Halicioglu, K.; Sabuncu, A.; Bal, O.; Eraslan, A.

    2015-12-01

    Active Fault Map of Turkey was revised and published by General Directorate of Mineral Research and Exploration in 2012. This map reveals that there are about 500 faults can generate earthquakes.In order to understand the earthquake potential of these faults, it is needed to determine the slip rates. Although many regional and local studies were performed in the past, the slip rates of the active faults in Turkey have not been determined. In this study, the block modelling, which is the most common method to produce slip rates, will be done. GPS velocities required for block modeling is being compiled from the published studies and the raw data provided then velocity field is combined. To form a homogeneous velocity field, different stochastic models will be used and the optimal velocity field will be achieved. In literature, GPS site velocities, which are computed for different purposes and published, are combined globally and this combined velocity field are used in the analysis of strain accumulation. It is also aimed to develop optimal stochastic models to combine the velocity data. Real time, survey mode and published GPS observations is being combined in this study. We also perform new GPS observations. Furthermore, micro blocks and main fault zones from Active Fault Map Turkey will be determined and homogeneous velocity field will be used to infer slip rates of these active faults. Here, we present the result of first year of the study. This study is being supported by THE SCIENTIFIC AND TECHNOLOGICAL RESEARCH COUNCIL OF TURKEY (TUBITAK)-CAYDAG with grant no. 113Y430.

  5. Active faulting and natural hazards in Armenia, eastern Turkey and northwestern Iran

    NASA Astrophysics Data System (ADS)

    Karakhanian, Arkady S.; Trifonov, Vladimir G.; Philip, Herve; Avagyan, Ara; Hessami, Khaled; Jamali, Farshad; Salih Bayraktutan, M.; Bagdassarian, H.; Arakelian, S.; Davtian, V.; Adilkhanyan, A.

    2004-03-01

    Active fault zones of Armenia, SE Turkey and NW Iran present a diverse set of interrelated natural hazards. Three regional case studies in this cross-border zone are examined to show how earthquakes interact with other hazards to increase the risk of natural disaster. In northern Armenia, a combination of several natural and man-made phenomena (earthquakes, landslides and unstable dams with toxic wastes) along the Pambak-Sevan-Sunik fault (PSSF) zone lowers from 0.4 to 0.2-0.3 g the maximum permissible level (MPL) of seismic hazard that may induce disastrous destruction and loss of life in the adjacent Vanadzor depression. In the Ararat depression, a large active fault-bounded pull-apart basin at the junction of borders of Armenia, Turkey, Iran and Azerbaijan, an earthquake in 1840 was accompanied by an eruption of Ararat Volcano, lahars, landslides, floods, soil subsidence and liquefaction. The case study demonstrates that natural hazards that are secondary with respect to earthquakes may considerably increase the damage and the casualties and increase the risk associated with the seismic impact. The North Tabriz-Gailatu fault system poses a high seismic hazard to the border areas of NW Iran, eastern Turkey, Nakhichevan (Azerbaijan) and southern Armenia. Right-lateral strike-slip motions along the North Tabriz fault have given rise to strong earthquakes, which threaten the city of Tabriz with its population of 1.2 million. The examples illustrate how the concentration of natural hazards in active fault zones increases the risk associated with strong earthquakes in Armenia, eastern Turkey and NW Iran. This generally occurs across the junctions of international borders. Hence, the transboundary character of active faults requires transboundary cooperation in the study and mitigation of the natural risk.

  6. Multilayer stress from gravity and its tectonic implications in urban active fault zone: A case study in Shenzhen, South China

    NASA Astrophysics Data System (ADS)

    Xu, Chuang; Wang, Hai-hong; Luo, Zhi-cai; Ning, Jin-sheng; Liu, Hua-liang

    2015-03-01

    It is significant to identify urban active faults for human life and social sustainable development. The ordinary methods to detect active faults, such as geological survey, artificial seismic exploration, and electromagnetic exploration, are not convenient to be carried out in urban area with dense buildings. It is also difficult to supply information about vertical extension of the deeper faults by these methods. Gravity, reflecting the mass distribution of the Earth's interior, provides an alternative way to detect faults, which is more efficient and convenient for urban active fault detection than the aforementioned techniques. Based on the multi-scale decomposition of gravity anomalies, a novel method to invert multilayer horizontal tectonic stresses is proposed. The inverted multilayer stress fields are further used to infer the distribution and stability of the main faults. In order to validate our method, the multilayer stress fields in the Shenzhen fault zone are calculated as a case study. The calculated stress fields show that their distribution is controlled significantly by the strike of the main faults and can be used to derive depths of the faults. The main faults in Shenzhen may range from 4 km to 20 km in the depth. Each layer of the crust is nearly equipressure since the horizontal tectonic stress has small amplitude. It indicates that the main faults in Shenzhen are relatively stable and have no serious impact on planning and construction of the city.

  7. Interactions between active faulting, volcanism, and sedimentary processes at an island arc: Insights from Les Saintes channel, Lesser Antilles arc

    NASA Astrophysics Data System (ADS)

    Leclerc, F.; Feuillet, N.; Deplus, C.

    2016-07-01

    New high-resolution marine geophysical data allow to characterize a large normal fault system in the Lesser Antilles arc, and to investigate the interactions between active faulting, volcanism, sedimentary, and mass-wasting processes. Les Saintes fault system is composed of several normal faults that form a 30 km wide half-graben accommodating NE-SW extension. It is bounded by the Roseau fault, responsible for the destructive Mw 6.3 21 November 2004 earthquake. The Roseau fault has been identified from the island of Basse-Terre to Dominica. It is thus 40 km long, and it could generate Mw 7 earthquakes in the future. Several submarine volcanoes are also recognized. We show that the fault system initiated after the main volcanic construction and subsequently controls the emission of volcanic products. The system propagates southward through damage zones. At the tip of the damage zones, several volcanic cones were recently emplaced probably due to fissures opening in an area of stress increase. A two-way interaction is observed between active faulting and sedimentary processes. The faults control the development of the main turbiditic system made of kilometer-wide canyons, as well as the location of sediment ponding. In turn, erosion and sedimentation prevent scarp growth at the seafloor. Faulting also enhances mass-wasting processes. Since its initiation, the fault system has consequently modified the morphologic evolution of the arc through perturbation of the sedimentary processes and localization of the more recent volcanic activity.

  8. Seismic Risk Assessment of Active Faults in Japan in Terms of Population Exposure to Seismic Intensity

    NASA Astrophysics Data System (ADS)

    Nojima, Nobuoto; Fujiwara, Hiroyuki; Morikawa, Nobuyuki; Ishikawa, Yutaka; Okumura, Toshihiko; Miyakoshi, Junichi

    This study evaluates and compares seismic risks associated with inland crustal earthquakes in Japan on the basis of published data available on the Japan Seismic Hazard Information Station (J-SHIS). First, taking account of prediction uncertainty of the attenuation law of seismic intensity, the evaluation method for population exposure (PEX) to seismic intensity is presented. The method is applied to 333 seismic events potentially caused by main active faults (154 cases) and other active faults (179 cases). The relationship between population exposure and the probability of occurrence of seismic events ("P-PEX relation") and the resultant seismic risk curves are obtained. Generalized risk index which incorporates the effects of focusing on urgency (probability) or significance (PEX) is defined, producing various risk rankings of active faults.

  9. Soil Moisture Active Passive Mission: Fault Management Design Analyses

    NASA Technical Reports Server (NTRS)

    Meakin, Peter; Weitl, Raquel

    2013-01-01

    As a general trend, the complexities of modern spacecraft are increasing to include more ambitious mission goals with tighter timing requirements and on-board autonomy. As a byproduct, the protective features that monitor the performance of these systems have also increased in scope and complexity. Given cost and schedule pressures, there is an increasing emphasis on understanding the behavior of the system at design time. Formal test-driven verification and validation (V&V) is rarely able to test the significant combinatorics of states, and often finds problems late in the development cycle forcing design changes that can be costly. This paper describes the approach the SMAP Fault Protection team has taken to address some of the above-mentioned issues.

  10. Cenozoic Tectonic Activity of the "Passive" North America Margin: Evidence for Cenozoic Activity on Mesozoic or Paleozoic Faults

    NASA Astrophysics Data System (ADS)

    Nedorub, O. I.; Knapp, C. C.

    2012-12-01

    -hole and seismic data along the Augusta profile show that there is a significant offset (approximately 7m) down to the SE of Pinehurst and older Cretaceous deposits. The Pen Branch fault seismic profile shows evidence of Cenozoic reactivation and inversion. The youngest discontinuous reflector (the top of the Dry Branch Formation) is offset by 1-4m and constrains the latest fault movement to be Middle Eocene in age. A NW-SE well derived cross-section across the Allendale fault shows that there is no significant offset above 50m below sea level (top of the Late Eocene Black Mingo Group), however a SW-NE cross section shows an approximately 21m offset NE side up across the newly postulated fault striking NW-SE. The top of the oldest undeformed formation (Middle Eocene Santee Limestone) and the top of the youngest deformed unit (Late Eocene Black Mingo Group) constrain a time frame for the latest deformation of the Coastal Plain sediments to be between approximately 50 and 40 Ma. The results of this research provide an opportunity to address the Cenozoic tectonism in SC, advance the knowledge and current understanding of the structure of the rift basins, update the database used for the ongoing CO2 sequestration project, the local hydrology, and the Savannah River Site safety evaluation.

  11. Faults paragenesis and paleostress state in the zone of actively propagating continental strike-slip on the example of North Khangai fault (Northern Mongolia)

    NASA Astrophysics Data System (ADS)

    Sankov, Vladimir; Parfeevets, Anna

    2014-05-01

    Sublatitudinal North Khangai fault extends from Ubsunuur basin to the eastern part of the Selenga corridor trough 800 km. It is the northern boundary of the massive Mongolian block and limits of the Baikal rift system structures propagation in the south (Logatchev, 2003). Late Cenozoic and present-day fault activity are expressed in the left-lateral displacements of a different order of river valleys and high seismicity. We have carried out studies of the kinematics of active faults and palaeostresses reconstruction in the zone of the dynamic influence of North Khangai fault, the width of which varies along the strike and can exceeds 100 km. The result shows that the fault zone has a longitudinal and a transverse zoning. Longitudinal zonation presented gradual change from west to east regions of compression and transpression regimes (Khan-Khukhey ridge) to strike-slip regime (Bolnay ridge) and strike-slip and transtensive regimes (west of Selenga corridor). Strike-slip zones are represented by linearly concentrated rupture deformations. In contrast, near the termination of the fault the cluster fault deformation formed. Here, from north to south, there are radical changes in the palaeostress state. In the north-western sector (east of Selenga corridor) strike-slip faults, strike-slip faults with normal components and normal faults are dominated. For this sector the stress tensors of extensive, transtension and strike-slip regimes are typical. South-western sector is separated from the north-eastern one by massive Buren Nuruu ridge within which the active faults are not identified. In the south-western sector between the Orkhon and Tola rivers the cluster of NW thrusts and N-S strike-slip faults with reverse component are discovered. The faults are perfectly expressed by NW and N-S scarps in the relief. The most structures dip to the east and north-east. Holocene fault activity is demonstrated by the hanging river valleys and horizontal displacements with amplitudes

  12. Active faulting and neotectonics in the Baelo Claudia area, Campo de Gibraltar (southern Spain)

    NASA Astrophysics Data System (ADS)

    Grützner, Christoph; Reicherter, Klaus; Hübscher, Christian; Silva, Pablo G.

    2012-07-01

    The Strait of Gibraltar area is part of the western Eurasian-African convergence zone characterized by a complex pattern of deformation, including thrusting and folding and active normal faulting. Generally, the area is of low-seismicity; only some minor earthquakes have been recorded in the last hundred years. Archaeoseismological data evidences earthquake destruction occurring twice during Roman times. A better neotectonic framework and knowledge on the paleostress evolution of the Strait of Gibraltar area is necessary to find the local sources for those events and to establish an understanding of the recent deformation. Paleoseismic evidence for one moderate earthquake event around 6000-5000 BP along the normal Carrizales Fault is described in this paper. Off-shore high-resolution seismic investigations, structural and paleostress data, high-resolution GPR and geoelectrical resistivity measurements, outcrop investigations and trenching studies are discussed. The data reveal that active faulting takes place along N-S trending normal faults. Hence, N-S directed normal faults in the area are claimed as local candidates for moderate earthquake activity. Return periods of moderate earthquakes in the order of at least 2000-2500 years in the study area may have to be taken into account. Structural data, such a paleostress data and joints are presented and a deformation history for the Strait of Gibraltar area in southern Spain is developed in this study.

  13. Geodetic Network Design and Optimization on the Active Tuzla Fault (Izmir, Turkey) for Disaster Management

    PubMed Central

    Halicioglu, Kerem; Ozener, Haluk

    2008-01-01

    Both seismological and geodynamic research emphasize that the Aegean Region, which comprises the Hellenic Arc, the Greek mainland and Western Turkey is the most seismically active region in Western Eurasia. The convergence of the Eurasian and African lithospheric plates forces a westward motion on the Anatolian plate relative to the Eurasian one. Western Anatolia is a valuable laboratory for Earth Science research because of its complex geological structure. Izmir is a large city in Turkey with a population of about 2.5 million that is at great risk from big earthquakes. Unfortunately, previous geodynamics studies performed in this region are insufficient or cover large areas instead of specific faults. The Tuzla Fault, which is aligned trending NE–SW between the town of Menderes and Cape Doganbey, is an important fault in terms of seismic activity and its proximity to the city of Izmir. This study aims to perform a large scale investigation focusing on the Tuzla Fault and its vicinity for better understanding of the region's tectonics. In order to investigate the crustal deformation along the Tuzla Fault and Izmir Bay, a geodetic network has been designed and optimizations were performed. This paper suggests a schedule for a crustal deformation monitoring study which includes research on the tectonics of the region, network design and optimization strategies, theory and practice of processing. The study is also open for extension in terms of monitoring different types of fault characteristics. A one-dimensional fault model with two parameters – standard strike-slip model of dislocation theory in an elastic half-space – is formulated in order to determine which sites are suitable for the campaign based geodetic GPS measurements. Geodetic results can be used as a background data for disaster management systems.

  14. Numerical simulation of coastal flooding after potential reactivation of an active normal fault in northern Taiwan

    NASA Astrophysics Data System (ADS)

    Chan, Yu-Chang; Kuo, Chih-Yu; Chang, Kuo-Jen; Chen, Rou-Fei; Hsieh, Yu-Chung

    2016-04-01

    Rapid coastal flooding from seawards may be resulted from storm surge, tsunamis, and sudden land subsidence due to fault activities. Many observations and numerical modeling of flooding have been made for cases resulted from storm surge and tsunami events; however, coastal flooding caused by a potential normal faulting event nearby coastal areas is rarely reported. In addition to the earthquake hazards from fault rupturing and ground shaking, the accompanied hazards of earthquake-induced flooding is also important to be investigated. The Jinshan area in northern Taiwan was reported to have been flooded by a tsunami event in the year of 1867 possibly resulted from the reactivation of the Shanchiao normal fault offshore. Historical records have shown that the Shanchiao Fault that extends from Shulin along the western edge of the Taipei Basin to the town of Jinshan may have also ruptured in the year of 1694. The rupturing event has created a depression on the western side of the Taipei Basin that was later filled by sea water called the Taipei Lake. The geological conditions in northern Taiwan provide an opportunity for numerically simulating the dynamic processes of sea water flooding nearby the coastal area immediately after an earthquake-induced normal faulting event. In this study, we focused on the potential active normal faulting that may occur and result in an expected catastrophic flooding in lowland area of Jinshan in northern Taiwan. We applied the continuum shallow water equation to evaluate the unknown inundation processes including location, extent, velocity and water depths after the flooding initiated and the final state of the flooding event. The modeling results were well compared with borehole observations of the extent of previous flooding events possibly due to tsunami events. In addition, the modeling results may provide a future basis for safety evaluation of the two nuclear power plants nearby the region.

  15. Comparative study of two active faults in different stages of the earthquake cycle in central Japan -The Atera fault (with 1586 Tensho earthquake) and the Nojima fault (with 1995 Kobe earthquake)-

    NASA Astrophysics Data System (ADS)

    Matsuda, T.; Omura, K.; Ikeda, R.

    2003-12-01

    National Research Institute for Earth Science and Disaster Prevention (NIED) has been conducting _gFault zone drilling_h. Fault zone drilling is especially important in understanding the structure, composition, and physical properties of an active fault. In the Chubu district of central Japan, large active faults such as the Atotsugawa (with 1858 Hietsu earthquake) and the Atera (with 1586 Tensho earthquake) faults exist. After the occurrence of the 1995 Kobe earthquake, it has been widely recognized that direct measurements in fault zones by drilling. This time, we describe about the Atera fault and the Nojima fault. Because, these two faults are similar in geological situation (mostly composed of granitic rocks), so it is easy to do comparative study of drilling investigation. The features of the Atera fault, which have been dislocated by the 1586 Tensho earthquake, are as follows. Total length is about 70 km. That general trend is NW45 degree with a left-lateral strike slip. Slip rate is estimated as 3-5 m / 1000 years. Seismicity is very low at present and lithologies around the fault are basically granitic rocks and rhyolite. Six boreholes have been drilled from the depth of 400 m to 630 m. Four of these boreholes (Hatajiri, Fukuoka, Ueno and Kawaue) are located on a line crossing in a direction perpendicular to the Atera fault. In the Kawaue well, mostly fractured and alternating granitic rock continued from the surface to the bottom at 630 m. X-ray fluorescence analysis (XRF) is conducted to estimate the amount of major chemical elements using the glass bead method for core samples. The amounts of H20+ are about from 0.5 to 2.5 weight percent. This fractured zone is also characterized by the logging data such as low resistivity, low P-wave velocity, low density and high neutron porosity. The 1995 Kobe (Hyogo-ken Nanbu) earthquake occurred along the NE-SW-trending Rokko-Awaji fault system, and the Nojima fault appeared on the surface on Awaji Island when this

  16. Analysis of microseismic activity detected by the WIZARD array, Alpine Fault, New Zealand

    NASA Astrophysics Data System (ADS)

    Feenstra, J. P.; Roecker, S. W.; Thurber, C. H.; Lord, N.; O'Brien, G.; Pesicek, J. D.; Townend, J.; Bannister, S. C.

    2012-12-01

    A primary goal for the UW-Madison-RPI WIZARD array is the characterization of background seismicity around the Deep Fault Drilling Project (DFDP) site on the Alpine Fault, South Island, New Zealand. The WIZARD array consists of 20 stations, half broadband, deployed for a planned 2-year period around the Whataroa Valley DFDP-2 drill site. Two neighboring arrays, SAMBA (Victoria University of Wellington) to the southwest and ALFA'12 (GNS Science) to the northeast, along with several GeoNet permanent stations, provide broad coverage of the region. The earthquakes that are detected will (1) help to define the geometry of the Alpine Fault and other active faults at depth, (2) provide data for seismic imaging, focal mechanisms, and shear-wave splitting analysis, and (3) enable the assessment of possible changes in seismic activity induced by future fault zone drilling. We are currently analyzing data from the first 2 months of the deployment. Dozens of nearby earthquakes (S-P time of up to a few seconds) have been detected, far more than are in the New Zealand GeoNET catalog. This is expected because the magnitude completion level of the GeoNet seismometer network is around 2.5 in the Whataroa region, due to a relatively sparse station coverage. In this presentation, we report on earthquake location results for 8 months of WIZARD data, along with focal mechanisms for selected larger events.

  17. Crossing Active Faults on the Sakhalin II Onshore Pipeline Route: Analysis Methodology and Basic Design

    SciTech Connect

    Vitali, Luigino; Mattiozzi, Pierpaolo

    2008-07-08

    Twin oil (20 and 24 inch) and gas (20 and 48 inch) pipeline systems stretching 800 km are being constructed to connect offshore hydrocarbon deposits from the Sakhalin II concession in the North to an LNG plant and oil export terminal in the South of Sakhalin island. The onshore pipeline route follows a regional fault zone and crosses individual active faults at 19 locations. Sakhalin Energy, Design and Construction companies took significant care to ensure the integrity of the pipelines, should large seismic induced ground movements occur during the Operational life of the facilities. Complex investigations including the identification of the active faults, their precise location, their particular displacement values and assessment of the fault kinematics were carried out to provide input data for unique design solutions. Lateral and reverse offset displacements of 5.5 and 4.5 m respectively were determined as the single-event values for the design level earthquake (DLE)--the 1000-year return period event. Within the constraints of a pipeline route largely fixed, the underground pipeline fault crossing design was developed to define the optimum routing which would minimize stresses and strain using linepipe materials which had been ordered prior to the completion of detailed design, and to specify requirements for pipe trenching shape, materials, drainage system, etc. This Paper describes the steps followed to formulate the concept of the special trenches and the analytical characteristics of the Model.

  18. Crossing Active Faults on the Sakhalin II Onshore Pipeline Route: Pipeline Design and Risk Analysis

    SciTech Connect

    Mattiozzi, Pierpaolo; Strom, Alexander

    2008-07-08

    Twin oil (20 and 24 inch) and gas (20 and 48 inch) pipeline systems stretching 800 km are being constructed to connect offshore hydrocarbon deposits from the Sakhalin II concession in the North to an LNG plant and oil export terminal in the South of Sakhalin island. The onshore pipeline route follows a regional fault zone and crosses individual active faults at 19 locations. Sakhalin Energy, Design and Construction companies took significant care to ensure the integrity of the pipelines, should large seismic induced ground movements occur during the Operational life of the facilities. Complex investigations including the identification of the active faults, their precise location, their particular displacement values and assessment of the fault kinematics were carried out to provide input data for unique design solutions. Lateral and reverse offset displacements of 5.5 and 4.5 m respectively were determined as the single-event values for the design level earthquake (DLE) - the 1000-year return period event. Within the constraints of a pipeline route largely fixed, the underground pipeline fault crossing design was developed to define the optimum routing which would minimize stresses and strain using linepipe materials which had been ordered prior to the completion of detailed design, and to specify requirements for pipe trenching shape, materials, drainage system, etc. Detailed Design was performed with due regard to actual topography and to avoid the possibility of the trenches freezing in winter, the implementation of specific drainage solutions and thermal protection measures.

  19. Crossing Active Faults on the Sakhalin II Onshore Pipeline Route: Analysis Methodology and Basic Design

    NASA Astrophysics Data System (ADS)

    Vitali, Luigino; Mattiozzi, Pierpaolo

    2008-07-01

    Twin oil (20 & 24 inch) and gas (20 & 48 inch) pipeline systems stretching 800 km are being constructed to connect offshore hydrocarbon deposits from the Sakhalin II concession in the North to an LNG plant and oil export terminal in the South of Sakhalin island. The onshore pipeline route follows a regional fault zone and crosses individual active faults at 19 locations. Sakhalin Energy, Design and Construction companies took significant care to ensure the integrity of the pipelines, should large seismic induced ground movements occur during the Operational life of the facilities. Complex investigations including the identification of the active faults, their precise location, their particular displacement values and assessment of the fault kinematics were carried out to provide input data for unique design solutions. Lateral and reverse offset displacements of 5.5 and 4.5 m respectively were determined as the single-event values for the design level earthquake (DLE)—the 1000-year return period event. Within the constraints of a pipeline route largely fixed, the underground pipeline fault crossing design was developed to define the optimum routing which would minimize stresses and strain using linepipe materials which had been ordered prior to the completion of detailed design, and to specify requirements for pipe trenching shape, materials, drainage system, etc. This Paper describes the steps followed to formulate the concept of the special trenches and the analytical characteristics of the Model.

  20. Crossing Active Faults on the Sakhalin II Onshore Pipeline Route: Pipeline Design and Risk Analysis

    NASA Astrophysics Data System (ADS)

    Mattiozzi, Pierpaolo; Strom, Alexander

    2008-07-01

    Twin oil (20 & 24 inch) and gas (20 & 48 inch) pipeline systems stretching 800 km are being constructed to connect offshore hydrocarbon deposits from the Sakhalin II concession in the North to an LNG plant and oil export terminal in the South of Sakhalin island. The onshore pipeline route follows a regional fault zone and crosses individual active faults at 19 locations. Sakhalin Energy, Design and Construction companies took significant care to ensure the integrity of the pipelines, should large seismic induced ground movements occur during the Operational life of the facilities. Complex investigations including the identification of the active faults, their precise location, their particular displacement values and assessment of the fault kinematics were carried out to provide input data for unique design solutions. Lateral and reverse offset displacements of 5.5 and 4.5 m respectively were determined as the single-event values for the design level earthquake (DLE)—the 1000-year return period event. Within the constraints of a pipeline route largely fixed, the underground pipeline fault crossing design was developed to define the optimum routing which would minimize stresses and strain using linepipe materials which had been ordered prior to the completion of detailed design, and to specify requirements for pipe trenching shape, materials, drainage system, etc. Detailed Design was performed with due regard to actual topography and to avoid the possibility of the trenches freezing in winter, the implementation of specific drainage solutions and thermal protection measures.

  1. Paleoseismic and geomorphologic evidence of recent tectonic activity of the Pozohondo Fault (Betic Cordillera, SE Spain)

    USGS Publications Warehouse

    Rodríguez-Pascua, M.A.; Pérez-López, R.; Garduño-Monroy, V.H.; Giner-Robles, J.L.; Silva, P.G.; Perucha-Atienza, M.A.; Hernández-Madrigal, V.M.; Bischoff, J.

    2012-01-01

    Instrumental and historical seismicity in the Albacete province (External Prebetic Zone) has been scarcely recorded. However, major strike-slip faults showing NW-SE trending provide geomorphologic and paleoseismic evidence of recent tectonic activity (Late Pleistocene to Present). Moreover, these faults are consistently well oriented under the present stress tensor and therefore, they can trigger earthquakes of magnitude greater than M6, according to the lengths of surface ruptures and active segments recognized in fieldwork. Present landscape nearby the village of Hellin (SE of Albacete) is determined by the recent activity of the Pozohondo Fault (FPH), a NW-SE right-lateral fault with 90 km in length. In this study, we have calculated the Late Quaternary tectonic sliprate of the FPH from geomorphological, sedimentological, archaeoseimological, and paleoseismological approaches. All of these data suggest that the FPH runs with a minimum slip-rate of 0.1 mm/yr during the last 100 kyrs (Upper Pleistocene-Holocene). In addition, we have recognized the last two major paleoearthquakes associated to this fault. Magnitudes of these paleoearthquakes were gretarer than M6 and their recurrence intervals ranged from 6600 to 8600 yrs for the seismic cycle of FPH. The last earthquake was dated between the 1st and 6th centuries, though two earthquakes could be interpreted in this wide time interval, one at the FPH and other from a far field source. Results obtained here, suggest an increasing of the tectonic activity of the Pozohondo Fault during the last 10,000 yrs.

  2. Distribution of active faulting along orogenic wedges: Minimum-work models and natural analogue

    NASA Astrophysics Data System (ADS)

    Yagupsky, Daniel L.; Brooks, Benjamin A.; Whipple, Kelin X.; Duncan, Christopher C.; Bevis, Michael

    2014-09-01

    Numerical 2-D models based on the principle of minimum work were used to examine the space-time distribution of active faulting during the evolution of orogenic wedges. A series of models focused on thin-skinned thrusting illustrates the effects of arid conditions (no erosion), unsteady state conditions (accretionary influx greater than erosional efflux) and steady state conditions (accretionary influx balances erosional efflux), on the distribution of fault activity. For arid settings, a general forward accretion sequence prevails, although a significant amount of internal deformation is registered: the resulting fault pattern is a rather uniform spread along the profile. Under fixed erosional efficiency settings, the frontal advance of the wedge-front is inhibited, reaching a steady state after a given forward propagation. Then, the applied shortening is consumed by surface ruptures over a narrow frontal zone. Under a temporal increase in erosional efficiency (i.e., transient non-steady state mass balance conditions), a narrowing of the synthetic wedge results; a rather diffuse fault activity distribution is observed during the deformation front retreat. Once steady balanced conditions are reached, a single long-lived deformation front prevails. Fault activity distribution produced during the deformation front retreat of the latter scenario, compares well with the structural evolution and hinterlandward deformation migration identified in southern Bolivian Subandes (SSA) from late Miocene to present. This analogy supports the notion that the SSA is not in steady state, but is rather responding to an erosional efficiency increase since late Miocene. The results shed light on the impact of different mass balance conditions on the vastly different kinematics found in mountain ranges, suggesting that those affected by growing erosion under a transient unbalanced mass flux condition tend to distribute deformation along both frontal and internal faults, while others

  3. The Trans-Atlantic Geotraverse hydrothermal field: A hydrothermal system on an active detachment fault

    NASA Astrophysics Data System (ADS)

    Humphris, Susan E.; Tivey, Margaret K.; Tivey, Maurice A.

    2015-11-01

    Over the last ten years, geophysical studies have revealed that the Trans-Atlantic Geotraverse (TAG) hydrothermal field (26°08‧N on the Mid-Atlantic Ridge) is located on the hanging wall of an active detachment fault. This is particularly important in light of the recognition that detachment faulting accounts for crustal accretion/extension along a significant portion of the Mid-Atlantic Ridge, and that the majority of confirmed vent sites on this slow-spreading ridge are hosted on detachment faults. The TAG hydrothermal field is one of the largest sites of high-temperature hydrothermal activity and mineralization found to date on the seafloor, and is comprised of active and relict deposits in different stages of evolution. The episodic nature of hydrothermal activity over the last 140 ka provides strong evidence that the complex shape and geological structure of the active detachment fault system exerts first order, but poorly understood, influences on the hydrothermal circulation patterns, fluid chemistry, and mineral deposition. While hydrothermal circulation extracts heat from a deep source region, the location of the source region at TAG is unknown. Hydrothermal upflow is likely focused along the relatively permeable detachment fault interface at depth, and then the high temperature fluids leave the low-angle portion of the detachment fault and rise vertically through the highly fissured hanging wall to the seafloor. The presence of abundant anhydrite in the cone on the summit of the TAG active mound and in veins in the crust beneath provides evidence for a fluid circulation system that entrains significant amounts of seawater into the shallow parts of the mound and stockwork. Given the importance of detachment faulting for crustal extension at slow spreading ridges, the fundamental question that still needs to be addressed is: How do detachment fault systems, and the structure at depth associated with these systems (e.g., presence of plutons and/or high

  4. Active Faults of the Northwest Himalaya: Pattern, Rate, and Timing of Surface Rupturing Earthquakes

    NASA Astrophysics Data System (ADS)

    Yule, J.; Madden, C.; Gavillot, Y.; Hebeler, A.; Meigs, A.; Hussein, A.; Malik, M.; Bhat, M.; Kausar, A.; Ramzan, S.; Sayab, M.; Yeats, R. S.

    2012-12-01

    The 2005 Kashmir earthquake (Mw 7.6) is the only Himalayan earthquake to rupture the surface since the 15th to 16th century A.D. when >Mw 8.5 earthquakes ruptured the Himalayan Frontal thrust (HFT) in the central Himalaya. Megathrust-type earthquakes like these seem to relieve a majority of the accumulated interseismic strain and concentrate permanent strain across a narrow width at the deformation front (faults within the orogen appear to accommodate little strain). The 2005 within-plate rupture in Kashmir may be a clue that a different seismotectonic model applies to the northwest Himalaya where active deformation occurs on faults distributed more than 120 km across the orogen. An asymmetric anticline marks the deformation front in Kashmir where the HFT is inferred to be blind, though ~20 m-high escarpments suggest that unrecognized thrust fault(s) may reach the surface locally. Folded river terraces and dip data also suggest that this frontal fold contains a SW-dipping back thrust. In Pakistan the Salt Range thrust system (SRT) defines the thrust front. New mapping and preliminary OSL dates from deformed Holocene sediments exposed along the westernmost SRT reveal that the fault slips at 1-7 mm/yr and last ruptured within the last several thousand years. Within the orogenic wedge to the north of the deformation front, active shortening occurs along a system of surface-rupturing reverse faults, extending from the Balakot-Bagh fault (source of the 2005 Kashmir earthquake) to the Reasi fault (RF) in Indian Kashmir to the southeast. One strand of the RF displaces a 350 m-high, 80 ± 6 ka (preliminary OSL age) fluvial terrace, yielding a minimum shortening rate of 3-5 mm/yr. Trenches excavated across the RF nearby reveal a distinct angular unconformity that likely formed during a surface rupture ~4500 yrs BP. Farther north, three northeast-dipping reverse faults cut Quaternary terraces on the southwest side of the Kashmir Valley. Trenches expose evidence for at least

  5. Distribution of deformation on an active normal fault network, NW Corinth Rift

    NASA Astrophysics Data System (ADS)

    Ford, Mary; Meyer, Nicolas; Boiselet, Aurélien; Lambotte, Sophie; Scotti, Oona; Lyon-Caen, Hélène; Briole, Pierre; Caumon, Guillaume; Bernard, Pascal

    2013-04-01

    Over the last 20-25 years, geodetic measurements across the Gulf of Corinth have recorded high extension rates varying from 1.1 cm/a in the east to a maximum of 1.6 cm/a in the west. Geodetic studies also show that current deformation is confined between two relatively rigid blocks defined as Central Greece (to the north) and the Peloponnesus to the south. Active north dipping faults (<1 Ma) define the south coast of the subsiding Gulf, while high seismicity (major earthquakes and micro-seismicity) is concentrated at depth below and to the north of the westernmost Gulf. How is this intense deformation distributed in the upper crust? Our objectives here are (1) to propose two models for the distribution of deformation in the upper crust in the westernmost rift since 1 Ma, and (2) to place the tectonic behaviour of the western Gulf in the context of longer term rift evolution. Over 20 major active normal faults have been identified in the CRL area based specific characteristics (capable of generating earthquakes M> 5.5, active in the last 1 M yrs, slip rate >0.5 mm/a). Because of the uncertainty related to fault geometry at depth two models for 3D fault network geometry in the western rift down to 10 km were constructed using all available geophysical and geological data. The first model assumes planar fault geometries while the second uses listric geometries for major faults. A model for the distribution of geodetically-defined extension on faults is constructed along five NNE-SSW cross sections using a variety of data and timescales. We assume that the role of smaller faults in accommodating deformation is negligible so that extension is fully accommodated on the identified major faults. Uncertainties and implications are discussed. These models provide estimates of slip rate for each fault that can be used in seismic hazard models. A compilation of onshore and offshore data shows that the western Gulf is the youngest part of the Corinth rift having initiated

  6. Active faulting induced by the slip partitioning in the Lesser Antilles arc

    NASA Astrophysics Data System (ADS)

    Leclerc, Frédérique; Feuillet, Nathalie

    2010-05-01

    AGUADOMAR marine cruise data acquired 11 years ago allowed us to identified and map two main sets of active faults within the Lesser Antilles arc (Feuillet et al., 2002; 2004). The faults belonging to the first set, such as Morne-Piton in Guadeloupe, bound up to 100km-long and 50km-wide arc-perpendicular graben or half graben that disrupt the fore-arc reef platforms. The faults of the second set form right-stepping en echelon arrays, accommodating left-lateral slip along the inner, volcanic islands. The two fault systems form a sinistral horsetail east of the tip of the left-lateral Puerto Rico fault zone that takes up the trench-parallel component of convergence between the North-American and Caribbean plates west of the Anegada passage. In other words, they together accommodate large-scale slip partitioning along the northeastern arc, consistent with recent GPS measurements (Lopez et al., 2006). These intraplate faults are responsible for a part of the shallow seismicity in the arc and have produce damaging historical earthquakes. Two magnitude 6.3 events occurred in the last 25 years along the inner en echelon faults, the last one on November 21 2004 in Les Saintes in the Guadeloupe archipelago. To better constrain the seismic hazard related to the inner arc faults and image the ruptures and effects on the seafloor of Les Saintes 2004 earthquake, we acquired new marine data between 23 February and 25 March 2009 aboard the French R/V le Suroît during the GWADASEIS cruise. We present here the data (high-resolution 72 channel and very high-resolution chirp 3.5 khz seismic reflection profiles, EM300 multibeam bathymetry, Küllenberg coring and SAR imagery) and the first results. We identified, mapped and characterized in detail several normal to oblique fault systems between Martinique and Saba. They offset the seafloor by several hundred meters and crosscut all active volcanoes, among them Nevis Peak, Soufriere Hills, Soufriere de Guadeloupe and Montagne Pel

  7. Faults Activities And Crustal Deformation near Hualien City, eastern Taiwan Analysed By Persistent Scatterer InSAR

    NASA Astrophysics Data System (ADS)

    Lu, C.; Lin, M.; Yen, J.; Chang, C.

    2008-12-01

    Hualien is located in eastern part of Taiwan, and is the collision boundary in the northern of Huatung Longitudinal Valley between the Philippine Sea tectonic plate and Eurasian tectonic plate(Biq, 1981; Barrier and Angelier, 1986). There are several active faults, such as Milun fault, Beipu fault and Minyi fault, pass through the Hualien city, and create many crustal deformation. According to previous researches (Hsu, 1956; Lin, 1962; Yu, 1997) we know Milun fault is a thrust and left lateral fault, and the fault plane incline to east. Minyi fault also is a left lateral and a slight reverse fault, but it's fault plane incline to west. (Chang, 1994; Yu, 1997) We applied the Persistent Scatterer Interferometric Synthetic Aperture Radar (PSInSAR, Hooper, 2007) to observe temporally-variable processes of Hualien city between 2004 to 2008. At the same time, precise leveling and GPS data were taken for the auxiliary data to verify the deformation rate and pattern in this area. In the Hualien city area, our observation showed that the active faults separate this area into several distinct blocks. Most of the blocks moved slowly, but the hanging wall of the Milun fault decreases 5- 8mm in line of sight (LOS) direction between 15 May 2004 to 24 Feb 2007, then increases 3-6mm in LOS between 1 Dec 2007 to 5 Jan 2008. The deformation reversed its direction in 2007. The western surface of Hualien City displays continuous deformation about 1.5-2mm/yr , which spread along the Beipu fault. Our preliminary investigation indicated that between late 2004 and middle 2005 there had been an abrupt increase in seismicity, which coincided with PSInSAR observation of a large displacement. The distribution of shallow source earthquakes correlate with the area with large deformation. Our following works include continuing observation of the Hualien City, and decipher the relationship between earthquakes and surface deformation, and model the fault action in Hualien City with time series.

  8. Hidden faults in the Gobi Desert (Inner Mongolia, China) - evidence for fault activity in a previously tectonically stable zone

    NASA Astrophysics Data System (ADS)

    Rudersdorf, Andreas; Haedke, Hanna; Reicherter, Klaus

    2013-04-01

    The Gaxun Nur Basin (GNB, also Ejina Basin, Hei River Basin, Ruoshui Basin) north of the Tibetan Plateau and the Hexi Corridor is an endorheic basin bounded by the Bei Shan ranges in the west, the Gobi Altai mountains in the north and the Badain Jaran sand desert in the east. The basin is fed from the south by the braided drainage system of the Hei He (Hei River) and its tributaries, which originate in the Qilian Shan; terminal lakes like the dried Gaxun Nur and Sogo Nur are and have been temporal. The sedimentary succession of up to 300 m comprises intercalations of not only alluvial deposits but also lake sediments and playa evaporites. The basin has been regarded as tectonically inactive by earlier authors; however, the dating of sediments from an earlier drill core in the basin center provided some implications for tectonic activity. Subsequent remote sensing efforts revealed large lineaments throughout the basin which are now considered as possible fault line fingerprints. We investigated well preserved Yardangs (clay terraces) in the northeastern part of the GNB, in the vicinity of the Juyanze (paleo) lake, and found evidence for Holocene active tectonics (seismites). We present a lithological analysis of the relevant sequences and conclusions on the recent tectonic activity within the study area.

  9. Active Tectonics along the Carboneras Fault (SE Iberian Margin): Onshore-Offshore Paleoseismological Approach

    NASA Astrophysics Data System (ADS)

    Moreno, X.; Masana, E.; Gràcia, E.; Pallàs, R.; Santanach, P.; Dañobeitia, J. J.; Party, I.

    2006-12-01

    The southern margin of the Iberian Peninsula hosts the convergent boundary between the European and African Plates. At the eastern Betic Cordillera, the Neogene and Quaternary shortening has mainly been absorbed by left-lateral strike-slip faults, which in the Iberian Peninsula is represented by the Eastern Betics Shear Zone (EBSZ). One of the longest structures in the EBSZ is the Carboneras Fault, with almost 50 km onshore and more than 100 km offshore. The low record seismicity along its trace, suggest either non seismic behaviour or long recurrence intervals (104 years). The aim of this work is an integrated onshore-offshore neotectonic and paleoseismological study of the Carboneras Fault Zone to characterize its seismic potential. The onshore study was made through regional geological and geomorphological analysis, geophysical prospecting, microtopography, trenching, and dating (14 C, U/Th, TL). Onshore macro and microstructures as beheaded and offset alluvial fans and S-C microstructures in the fault zone reveals a Quaternary left-lateral strike-slip motion combined with a vertical component along the fault. Trenching reveals this fault is seismogenic, with at least four late Quaternary events. The oldest occurred between 54.9 and 32.2 ka BP, the second one between 40.9 and 27.1 ka BP, and the two most recent events occurred between 30.8 and 0.875 ka BP. The thickness of the colluvial wedges suggest a Mw=7 for the first and Mw=6.6 for the second event. The mean recurrence rate is 14 ka, and the minimum elapsed time is 875 years. The offshore portion, studied by high-resolution marine geophysical methods, shows very similar strike-slip structures. The marine paleoseismic data will be integrated with the onland results in order to accurately determine the recent activity and seismic parameters of the entire Carboneras Fault.

  10. Duration of activity on lobate-scarp thrust faults on Mercury

    NASA Astrophysics Data System (ADS)

    Banks, Maria E.; Xiao, Zhiyong; Watters, Thomas R.; Strom, Robert G.; Braden, Sarah E.; Chapman, Clark R.; Solomon, Sean C.; Klimczak, Christian; Byrne, Paul K.

    2015-11-01

    Lobate scarps, landforms interpreted as the surface manifestation of thrust faults, are widely distributed across Mercury and preserve a record of its history of crustal deformation. Their formation is primarily attributed to the accommodation of horizontal shortening of Mercury's lithosphere in response to cooling and contraction of the planet's interior. Analyses of images acquired by the Mariner 10 and MErcury Surface, Space ENvironment, GEochemistry, and Ranging (MESSENGER) spacecraft during flybys of Mercury showed that thrust faults were active at least as far back in time as near the end of emplacement of the largest expanses of smooth plains. However, the full temporal extent of thrust fault activity on Mercury, particularly the duration of this activity following smooth plains emplacement, remained poorly constrained. Orbital images from the MESSENGER spacecraft reveal previously unrecognized stratigraphic relations between lobate scarps and impact craters of differing ages and degradation states. Analysis of these stratigraphic relations indicates that contraction has been a widespread and long-lived process on the surface of Mercury. Thrust fault activity had initiated by a time near the end of the late heavy bombardment of the inner solar system and continued through much or all of Mercury's subsequent history. Such deformation likely resulted from the continuing secular cooling of Mercury's interior.

  11. Velocity-dependent frictional behavior and slip magnitude of a fault affected by fluid injection activities

    NASA Astrophysics Data System (ADS)

    Urpi, L.; Rinaldi, A. P.; Spiers, C. J.

    2014-12-01

    Fluid injection is performed or planned for various activities, such as CO2 sequestration, gas storage, waste water disposal, and engineered geothermal system. Static stress and pressure perturbation due to the fluid injection may cause different scale earthquake phenomena, from instrumental recorded micro-seismicity to triggering of human-felt events. With this study we present a sensitivity analysis of the slip magnitude for the fluid injection in a reservoir-like structure. The reservoir, confined within impervious rock units, is composed by a porous rock mass laterally bounded by a fault. The fault is hydraulically connected to the fluid hosting unit. The numerical analysis is based on fully explicit sequential coupling between a multiphase fluid flow and a hydromechanical finite element calculation code. When the system conditions approaches failure, the simulation is performed in a fully dynamic mode. The coupling allows simulating change in permeability due to stress/strain change, as well as the slip on the fault due to overpressure and associated stress changes. Interface elements have been used to include the constitutive law characterizing the frictional behaviour of the fault. The change in friction with different slip velocities has been derived from laboratory results. Velocity- and strain-dependent frictional behavior of different patches of the fault influence the system evolution, resulting in larger or smaller slip length for the same injected volume.

  12. Evidence of sub Kilometer-scale Variability in Stress Directions near Active Faults: An Example from the Newport-Inglewood Fault, Southern California

    NASA Astrophysics Data System (ADS)

    Persaud, P.; Stock, J. M.; Smith, D.

    2015-12-01

    The active Newport-Inglewood Fault (NIF) zone is a series of right-lateral, left-stepping en echelon segments and associated anticlines that produced the 1933 Long Beach Mw 6.4 earthquake. Seismic hazard estimates, dynamic earthquake rupture models, and earthquake simulations for Southern California rely on information on the stress field obtained from the Community Stress Model (CSM), though the latter still lacks observational constraints. This study provides much needed observational constraints on in-situ stress, which are useful for validating the CSM. Our results highlight the possibility of variations in stress directions near active faults at length-scales less than 1 km. We determined the orientation of stress-induced compressive failures or borehole breakouts, which are reliable indicators of the orientation of the maximum horizontal stress (SH) in over 40 wellbores in the Los Angeles basin near the NIF. The compressional jogs along the fault have long been drilled for oil in this major metropolitan area, and so provide the dataset of oriented caliper logs. This allowed us to investigate the variation of SH direction in three oil fields. In the Inglewood oil field, a dense dataset of 24 wells in ~2 km2, SH varies from N9°E to N32°E over a depth range of 1-3 km and within 400 m of the fault in the western fault block, with more variability occurring in wells father away. At depths below 2 km, SH takes on a more northerly orientation. In contrast, SH is oriented E-W in the eastern fault block, based on constraints from two wells. In the Wilmington oil field located between the Thums-Huntington Beach Fault and the NIF, data from 11 deviated wells yields a pattern of elongation directions, which differs from the more complex pattern obtained for the Huntington Beach wells located ~12 km to the southeast. The short-length-scale variations in SH direction are attributed to the proximity to faults or fault segmentation, and indicate the likely complexity that

  13. Active tectonic extension across the Alto Tiberina normal fault system from GPS data modeling and InSAR velocity maps: new perspectives within TABOO Near Fault Observatory

    NASA Astrophysics Data System (ADS)

    Vadacca, Luigi; Anderlini, Letizia; Casarotti, Emanuele; Serpelloni, Enrico; Chiaraluce, Lauro; Polcari, Marco; Albano, Matteo; Stramondo, Salvatore

    2014-05-01

    The Alto Tiberina fault (ATF) is a low-angle (east-dipping at 15°) normal fault (LANF) 70 km long placed in the Umbria-Marche Apennines (central Italy), characterized by SW-NE oriented extension occurring at rates of 2-3 mm/yr. These rates were measured by continuous GPS stations belonging to several networks, which are denser in the study area thanks to additional sites recently installed in the framework of the INGV national RING network and of the ATF observatory. In this area historical and instrumental earthquakes mainly occur on west-dipping high-angle normal faults. Within this context the ATF has accumulated 2 km of displacement over the past 2 Ma, but at the same time the deformation processes active along this misoriented fault, as well as its mechanical behavior, are still unknown. We tackle this issue by solving for interseismic deformation models obtained by two different methods. At first, through the 2D and 3D finite element modeling, we define the effects of locking depth, synthetic and antithetic fault activity and lithology on the velocity gradient measured along the ATF system. Subsequently through a block modeling approach, we model the GPS velocities by considering the major fault systems as bounds of rotating blocks, while estimating the corresponding geodetic fault slip-rates and maps of heterogeneous fault coupling. Thanks to the latest imaging of the ATF deep structure obtained from seismic profiles, we improve the proposed models by modeling the fault as a complex rough surface to understand where the stress accumulations are located and the interseismic coupling changes. The preliminary results obtained show firstly that the observed extension is mainly accommodated by interseismic deformation on both the ATF and antithetic faults, highlighting the important role of this LANF inside an active tectonic contest. Secondarily, using the ATF surface "topography", we find an interesting correlation between microseismicty and creeping portions

  14. Robust fault-tolerant H∞ control of active suspension systems with finite-frequency constraint

    NASA Astrophysics Data System (ADS)

    Wang, Rongrong; Jing, Hui; Karimi, Hamid Reza; Chen, Nan

    2015-10-01

    In this paper, the robust fault-tolerant (FT) H∞ control problem of active suspension systems with finite-frequency constraint is investigated. A full-car model is employed in the controller design such that the heave, pitch and roll motions can be simultaneously controlled. Both the actuator faults and external disturbances are considered in the controller synthesis. As the human body is more sensitive to the vertical vibration in 4-8 Hz, robust H∞ control with this finite-frequency constraint is designed. Other performances such as suspension deflection and actuator saturation are also considered. As some of the states such as the sprung mass pitch and roll angles are hard to measure, a robust H∞ dynamic output-feedback controller with fault tolerant ability is proposed. Simulation results show the performance of the proposed controller.

  15. Assessing low-activity faults for the seismic safety of dams

    SciTech Connect

    Page, W.D.; Savage, W.U.; McLaren, M.K.

    1995-12-31

    Dams have been a familiar construct in the northern Sierra Nevada range in California (north of the San Joaquin River) since the forty-niners and farmers diverted water to their gold mines and farms in the mid 19th century. Today, more than 370 dams dot the region from the Central Valley to the eastern escarpment. Fifty-five more dam streams on the eastern slope. The dams are of all types: 240 earth fill; 56 concrete gravity; 45 rock and earth fills; 35 rock fill; 14 concrete arch; 9 hydraulic fill; and 29 various other types. We use the northern Sierra Nevada to illustrate the assessment of low-activity faults for the seismic safety of dams. The approach, techniques, and methods of evaluation are applicable to other regions characterized by low seismicity and low-activity faults having long recurrence intervals. Even though several moderate earthquakes had shaken the Sierra Nevada since 1849 (for example, the 1875 magnitude 5.8 Honey Lake and the 1909 magnitudes 5 and 5.5 Downieville earthquakes), seismic analyses for dams in the area generally were not performed prior to the middle of this century. Following the 1971 magnitude 6.7 San Fernando earthquake, when the hydraulic-fill Lower Van Norman Dam in southern California narrowly escaped catastrophic failure, the California Division of Safety of Dams and the Federal Energy Regulatory Commission required seismic safety to be addressed with increasing rigor. In 1975, the magnitude 5.7 Oroville earthquake on the Cleveland Hill fault near Oroville Dam in the Sierra Nevada foothills, showed convincingly that earthquakes and surface faulting could occur within the range. Following this event, faults along the ancient Foothills fault system have been extensively investigated at dam sites.

  16. On the seismic activity of the Malibu Coast Fault Zone, and other ethical problems in engineering geoscience

    SciTech Connect

    Cronin, V.S. . Geosciences Dept.)

    1992-01-01

    The Malibu Coast Fault Zone (MCFZ) merges eastward with the active Santa Monica, Hollywood, Raymond Hill, Sierra Madre, and Cucamonga Faults of the central Transverse Ranges. West of Point Dume, the MCFZ extends offshore to join the active Santa Cruz Island Fault. Active microearthquake seismicity along the MCFZ trend indicates that it is seismogenic. Focal mechanism solutions for several of these earthquakes indicate thrusting along faults with the same orientation as the MCFZ. The geomorphology of the MCFZ is consistent with the interpretation that the MCFZ is active. Scarps in unconsolidated sands along the continental shelf just south of Malibu indicate recent offset. In the Santa Monica Mountains, late Tertiary and Quaternary marine sedimentary strata are exposed on the hanging-wall side of the MCFZ, indicating active uplift of the Santa Monica Mountains. Given the other indicators of fault activity, the trench studies that must still be undertaken across the MCFZ are more likely to establish the chronology of recent displacement along the MCFZ than to indicate that the fault is not active. It has been suggested that the MCFZ has not yet been formally recognized as an active, seismogenic fault zone because of the expected loss of property value should the MCFZ be designated an active fault. Geoscientists fear being held liable for loss of property value, even though their assessment of fault activity may be scientifically valid. What are the ethical responsibilities of geoscientists involved in seismic risk assessment along the MCFZ Are political or financial considerations valid criteria to use in assessing the activity of a fault These are not abstract questions of geoethics, because the lives and properties of countless people are potentially at risk.

  17. InSAR Evidence for the Spokane Fault, an Active Shallow Thrust Fault Beneath the City of Spokane Washington, USA

    NASA Astrophysics Data System (ADS)

    Wicks, C.; Weaver, C. S.; Bodin, P.; Sherrod, B. L.

    2012-12-01

    In 2001 a nearly five month long sequence of shallow, mostly small magnitude earthquakes occurred beneath Spokane, a city with a population of about 200,000, in the state of Washington. The Spokane area, an area of low background seismicity, is on the northeastern edge of the Columbia Basin, a physiographic province largely covered with Miocene flood basalts of the Columbia River Basalt Group. The earthquake sequence appears to have begun with an isolated magnitude 2 earthquake on May 24, 2001, but began in earnest with a magnitude 3.9 earthquake on June 25, 2001 and ended on November 23, 2001, with a total of 105 earthquakes recorded up to a magnitude 4. During most of the sequence, the earthquakes were not well located because seismic instrumentation was sparse. Despite poor-quality locations, the earthquake hypocenters were likely very shallow, because residents in small areas of Spokane reported feeling many of the earthquakes in the sequence and hearing explosion-like noises associated with some of the earthquakes. Using interferometric synthetic aperture radar (InSAR) data from the European Space Agency ERS2 and ENVISAT satellites and the Canadian Space Agency RADARSAT-1 satellite we are able to show that slip on a shallow previously unknown thrust fault, that we name the Spokane Fault, is the source of the earthquake sequence. The fault strikes northeast, dips ~30 degrees to the northwest, and the maximum slip was ~45 mm. The part of the Spokane Fault that slipped during the 2001 earthquake sequence underlies the north part of the city, and slip on the fault was concentrated between ~0.3 and 2 km depth. Projecting the buried fault plane to the surface gives a possible surface trace for the Spokane Fault; it strikes northeast from the city center into north Spokane. An accurate assessment of the hazard potential of the Spokane Fault requires additional studies to delineate the fault and map the subsurface geology.

  18. Active in-database processing to support ambient assisted living systems.

    PubMed

    de Morais, Wagner O; Lundström, Jens; Wickström, Nicholas

    2014-08-12

    As an alternative to the existing software architectures that underpin the development of smart homes and ambient assisted living (AAL) systems, this work presents a database-centric architecture that takes advantage of active databases and in-database processing. Current platforms supporting AAL systems use database management systems (DBMSs) exclusively for data storage. Active databases employ database triggers to detect and react to events taking place inside or outside of the database. DBMSs can be extended with stored procedures and functions that enable in-database processing. This means that the data processing is integrated and performed within the DBMS. The feasibility and flexibility of the proposed approach were demonstrated with the implementation of three distinct AAL services. The active database was used to detect bed-exits and to discover common room transitions and deviations during the night. In-database machine learning methods were used to model early night behaviors. Consequently, active in-database processing avoids transferring sensitive data outside the database, and this improves performance, security and privacy. Furthermore, centralizing the computation into the DBMS facilitates code reuse, adaptation and maintenance. These are important system properties that take into account the evolving heterogeneity of users, their needs and the devices that are characteristic of smart homes and AAL systems. Therefore, DBMSs can provide capabilities to address requirements for scalability, security, privacy, dependability and personalization in applications of smart environments in healthcare.

  19. Is Library Database Searching a Language Learning Activity?

    ERIC Educational Resources Information Center

    Bordonaro, Karen

    2010-01-01

    This study explores how non-native speakers of English think of words to enter into library databases when they begin the process of searching for information in English. At issue is whether or not language learning takes place when these students use library databases. Language learning in this study refers to the use of strategies employed by…

  20. Late Pleistocene to Historical Activity of the Hovd Fault (Mongolian Altay) from Tectonic Geomorphology and Paleoseismology

    NASA Astrophysics Data System (ADS)

    Ferry, M. A.; Battogtokh, D.; Ritz, J. F.; Kurtz, R.; Braucher, R.; Klinger, Y.; Ulzibat, M.; Chimed, O.; Demberel, S.

    2015-12-01

    Active tectonics of western Mongolia is dominated by large strike-slip fault systems that produced great historical earthquakes: the Bulnay fault (Mw 8.1 and 8.4 in 1905), the Fu-Yun fault (Mw 8.0 in 1931) and the Bogd fault (Mw 8.1 in 1957). Central to these faults is the Altay Range that accommodates ~4 mm/yr of right-lateral motion. An earthquake of similar magnitude occurred in 1761 and has been attributed to the Hovd fault were seemingly fresh surface rupture was reported in 1985. Here, we study the Ar-Hötöl section of the Hovd fault where surface rupture was described over a length of ~200 km. Detailed mapping of stream gullies from high-resolution Pleiades satellite images show a consistent pattern of right-lateral offsets from a few meters to ~500 m. At Climbing Rock, we surveyed a gully offset by 75 ± 5 m. The associated surface was sampled for 10Be profile which yields an exposure age of 154 ± 20 ka. The resulting minimal right-lateral slip rate ranges 0.4-0.6 mm/yr. However, drainage reconstruction suggests this surface may have recorded as much as 400 ± 20 m of cumulative offset. This implies the Hovd fault may accommodate as much as 2.6 ± 0.4 mm/yr, which would make it the main active fault of the Altay. At a smaller scale, TLS topography documents offsets in the order of 2.5-5 m that likely correspond to the most recent surface-rupturing event with Mw ~8. A value of 2.8-3.0 m is reconstructed from a Uiger grave dated AD 750-840. At Marmot Creek and Small Creek, short drainages flow across the fault and form ponds against the main scarp. Two paleoseimic trenches reveal similar stratigraphy with numerous peat layers that developed over alluvial sands. The fault exhibits near vertical strands affecting pre-ponding units as well as a well-developed peat unit radiocarbon-dated AD 1465-1635. This unit likely corresponds to the ground surface at the time of the last rupture. It is overlain with a sandy pond unit on top of which a second continuous peat

  1. Fault Activity Investigations in the Lower Tagus Valley (Portugal) With Seismic and Geoelectric Methods

    NASA Astrophysics Data System (ADS)

    Carvalho, J. G.; Gonçalves, R.; Torres, L. M.; Cabral, J.; Mendes-Victor, L. A.

    2004-05-01

    The Lower Tagus River Valley is located in Central Portugal, and includes a large portion of the densely populated area of Lisbon. It is sited in the Lower Tagus Cenozoic Basin, a tectonic depression where up to 2,000 m of Cenozoic sediments are preserved, which was developed in the Neogene as a compressive foredeep basin related to tectonic inversion of former Mesozoic extensional structures. It is only a few hundred kilometers distant from the Eurasia-Africa plate boundary, and is characterized by a moderate seismicity presenting a diffuse pattern, with historical earthquakes having caused serious damage, loss of lives and economical problems. It has therefore been the target of several seismic hazard studies in which extensive geological and geophysical research was carried out on several geological structures. This work focuses on the application of seismic and geoelectric methods to investigate an important NW-SE trending normal fault detected on deep oil-industry seismic reflection profiles in the Tagus Cenozoic Basin. In these seismic sections this fault clearly offsets horizons that are ascribed to the Upper Miocene. However, due to the poor near surface resolution of the seismic data and the fact that the fault is hidden under the recent alluvial cover of the Tagus River, it was not clear whether it displaced the upper sediments of Holocene age. In order to constrain the fault geometry and kinematics and to evaluate its recent tectonic activity, a few high-resolution seismic reflection profiles were acquired and refraction interpretation of the reflection data was performed. Some vertical electrical soundings were also carried out. A complex fault system was detected, apparently with normal and reverse faulting. The collected data strongly supports the possibility that one of the detected faults affects the uppermost Neogene sediments and very probably the Holocene alluvial sediments of the Tagus River. The evidence of recent activity on this fault, its

  2. Correlation Between Radon Outgassing and Seismic Activity Along the Hayward Fault Near Berkeley, California

    NASA Astrophysics Data System (ADS)

    Holtmann-Rice, D.; Cuff, K.

    2003-12-01

    Results from previous studies indicate that radon concentration values are significantly higher over selected sections of the Hayward fault than adjacent areas. This phenomenon is believed to be attributed to the presence of abundant fractures in rock associated with the fault, which act as pathways for radon as it migrates from depth towards the earth?s surface. In an attempt to determine whether or not a relationship exists between seismicity along the fault, the production of microfractures, and emanation of radon, a radon outgassing monitoring study was conducted along an active section of the Hayward fault in Berkeley, California. The study was carried out by using an alphaMETER 611, which is a device capable of accurately measuring radon concentrations every 15 minutes. The alphaMETER was placed at the bottom of a sealed one meter deep well, in close proximity to a section of the Hayward fault located along the northwestern face of the Berkeley Hills. Once per week for several months data collected by the alphaMETER was downloaded into a laptop computer. Data from the alphaMETER was then compared with seismic data recorded by local seismometers to see if any correlation existed. A general correlation between variation in radon concentration and the occurrence of small earthquakes was found. Significant peaks in radon concentration were observed within an approximately one week period before the occurrence of small earthquakes. Concentration values then decreased dramatically just prior to and during periods when the earthquakes occurred. Such correlation is very similar to that recently observed in association with a magnitude five earthquake along the Anatolian Fault, reported by geoscientists working in Turkey using similar instrumentation (Inan, 2003, personal communication). The most plausible explanation for the observed correlation is as follows: 1) prior to a given earthquake, stress build up within a particular fault region leads to the formation of

  3. Heterogeneity in friction strength of an active fault by incorporation of fragments of the surrounding host rock

    NASA Astrophysics Data System (ADS)

    Kato, Naoki; Hirono, Tetsuro

    2016-07-01

    To understand the correlation between the mesoscale structure and the frictional strength of an active fault, we performed a field investigation of the Atera fault at Tase, central Japan, and made laboratory-based determinations of its mineral assemblages and friction coefficients. The fault zone contains a light gray fault gouge, a brown fault gouge, and a black fault breccia. Samples of the two gouges contained large amounts of clay minerals such as smectite and had low friction coefficients of approximately 0.2-0.4 under the condition of 0.01 m s-1 slip velocity and 0.5-2.5 MP confining pressure, whereas the breccia contained large amounts of angular quartz and feldspar and had a friction coefficient of 0.7 under the same condition. Because the fault breccia closely resembles the granitic rock of the hangingwall in composition, texture, and friction coefficient, we interpret the breccia as having originated from this protolith. If the mechanical incorporation of wall rocks of high friction coefficient into fault zones is widespread at the mesoscale, it causes the heterogeneity in friction strength of fault zones and might contribute to the evolution of fault-zone architectures.

  4. Results from NICLAKES Survey of Active Faulting Beneath Lake Managua,Central American Volcanic arc

    NASA Astrophysics Data System (ADS)

    McIntosh, K.; Funk, J.; Mann, P.; Perez, P.; Strauch, W.

    2006-12-01

    Lake Managua covers an area of 1,035 km2 of the Central American volcanic arc and is enclosed by three major stratovolcanoes: Momotombo to the northwest was last active in AD 1905, Apoyeque in the center on the Chiltepe Peninsula was last active ca. 4600 years BP, and Masaya to the southeast was last active in AD 2003. A much smaller volcano in the lake (Momotombito) is thought to have been active <4500 yrs B.P. In May of 2006, we used a chartered barge to collect 330 km of 3.5 kHz profiler data along with coincident 274 km of sidescan sonar and 27 km of seismic reflection data. These data identify three zones of faulting on the lake floor: 1) A zone of north-northeast-striking faults in the shallow (2.5-7.5 m deep) eastern part of the lake that extends from the capital city of Managua, which was severely damaged by shallow, left-lateral strike-slip displacements on two of these faults in 1931 (M 5.6) and 1972 (M 6.2): these faults exhibit a horst and graben character and include possible offsets on drowned river valleys 2) a semicircular rift zone that is 1 km wide and can be traced over a distance of 30 km in the central part of the lake; the rift structure defines the deepest parts of the lake ranging from 12 to 18 m deep and is concentric about the Apoyeque stratocone/Chiltepe Peninsula; and 3) a zone of fault scarps defining the northwestern lake shore that may correlate to the northwestern extension of the Mateare fault zone, a major scarp-forming fault that separates the Managua lowlands from the highlands south and west of the city. Following previous workers, we interpret the northeast- trending group of faults in the eastern part of the lake as part of a 15-km-long discontinuity where the trend of the volcanic arc is offset in a right-lateral sense. The semi-circular pattern of the rift zone that is centered on Chiltepe Peninsula appears to have formed as a distal effect of either magma intrusion or withdrawal from beneath this volcanic complex. The

  5. GeoBioScience: Red Wood Ants as Bioindicators for Active Tectonic Fault Systems in the West Eifel (Germany)

    PubMed Central

    Berberich, Gabriele; Schreiber, Ulrich

    2013-01-01

    Simple Summary In a 1.140 km² study area of the volcanic West Eifel, approx. 3,000 Red Wood Ant (RWA; Formica rufa-group) mounds had been identified and correlated with tectonically active gas-permeable faults, mostly strike-slip faults. Linear alignment of RWA mounds and soil gas anomalies distinctly indicate the course of these faults, while clusters of mounds indicate crosscut zones of fault systems, which can be correlated with voids caused by crustal block rotation. This demonstrates that RWA are bioindicators for identifying active fault systems and useful where information on the active regime is incomplete or the resolution by technical means is insufficient. Abstract In a 1.140 km² study area of the volcanic West Eifel, a comprehensive investigation established the correlation between red wood ant mound (RWA; Formica rufa-group) sites and active tectonic faults. The current stress field with a NW-SE-trending main stress direction opens pathways for geogenic gases and potential magmas following the same orientation. At the same time, Variscan and Mesozoic fault zones are reactivated. The results showed linear alignments and clusters of approx. 3,000 RWA mounds. While linear mound distribution correlate with strike-slip fault systems documented by quartz and ore veins and fault planes with slickensides, the clusters represent crosscut zones of dominant fault systems. Latter can be correlated with voids caused by crustal block rotation. Gas analyses from soil air, mineral springs and mofettes (CO2, Helium, Radon and H2S) reveal limiting concentrations for the spatial distribution of mounds and colonization. Striking is further the almost complete absence of RWA mounds in the core area of the Quaternary volcanic field. A possible cause can be found in occasionally occurring H2S in the fault systems, which is toxic at miniscule concentrations to the ants. Viewed overall, there is a strong relationship between RWA mounds and active tectonics in the West Eifel

  6. Geomorphic evidence of active faults growth in the Norcia seismic area (central Apennines, Italy)

    NASA Astrophysics Data System (ADS)

    Materazzi, Marco; Aringoli, Domenico; Farabollini, Piero; Giacopetti, Marco; Pambianchi, Gilberto; Tondi, Emanuele; Troiani, Francesco

    2016-04-01

    Fault-growth by segment linkage is one of the fundamental processes controlling the evolution, in both time and the space, of fault systems. In fact, step-like trajectories shown by length-displacement diagrams for individual fault arrays suggest that the development of evolved structures result by the linkage of single fault segments. The type of interaction between faults and the rate at which faults reactivate not only control the long term tectonic evolution of an area, but also influence the seismic hazard, as earthquake recurrence intervals tend to decrease as fault slip rate increase. The use of Geomorphological investigations represents an important tool to constrain the latest history of active faults. In this case, attention has to be given to recognize morphostructural, historical, environmental features at the surface, since they record the long-term seismic behavior due to the fault growth processes (Tondi and Cello, 2003). The aim of this work is to investigate the long term morphotectonic evolution of a well know seismic area in the central Apennines: the Norcia intramontane basin (Aringoli et al., 2005). The activity of the Norcia seismic area is characterized by moderate events and by strong earthquakes with maximum intensities of X-XI degrees MCS and equivalent magnitudes around 6.5±7.0 (CPTI, 2004). Based on the morphostructural features as well as on the historical seismicity of the area, we may divide the Norcia seismic area into three minor basins roughly NW-SE oriented: the Preci sub-basin in the north; the S. Scolastica and the Castel S. Maria sub-basins in the south. The wider basin (S. Scolastica) is separated from the other two by ridges transversally oriented with respect the basins themselves; they are the geomorphological response to the tectonic deformation which characterizes the whole area. Other geomorphological evidences of tectonic activity are represented by deformation of old summit erosional surfaces, hydrographic network

  7. Along strike variation in fault creep on the active Alto Tiberina low angle normal fault inferred from GPS geodesy

    NASA Astrophysics Data System (ADS)

    Bennett, R. A.; Jackson, L. J.; Mencin, D.; Casale, G.

    2013-12-01

    The Alto Tiberina fault (ATF) in central Italy is a low angle normal fault (LANF) dipping ~20° to the east-northeast. The fault is inferred from surface geology, deep boreholes, seismic reflection lines, abundant microseismicity, and crustal motion data. Balanced cross sections show that the fault plays a major role in accommodating regional extension in central Italy, having accommodated up to 10 km of extension over the past 3 Ma. However, no large earthquakes have been attributed to the ATF. Instead, large earthquakes in the area occur on high angle west dipping normal faults that cut the ATF hanging wall. Several lines of evidence, including fine grained foliations composed of velocity strengthening phyllosilicate minerals in exhumed fault rocks, high fault fluid over-pressures observed in footwall boreholes (~85% lithostatic pressure at 3.7-4.8 km depth), persistent microseismicity coincident with the ATF fault plane, and pattern of geodetically observed crustal motions suggest that the ATF accommodates slip primarily by aseismic creep up to shallow (~4 km) depth in the crust. Previous studies using a simple fault model consisting of an edge dislocation buried in and elastic halfspace supported the shallow creeping hypothesis. But newer realizations of the crustal motion field, imaged with more precision and higher spatial resolution than previously reported, are not adequately explained by this 1-D creeping-fault model. Moreover, significant variations in the occurrence of large hanging wall earthquakes are observed along the strike of the ATF and may be indicative of along-strike variation in ATF fault mechanics. To test whether the along-strike variation in earthquake occurrence is accompanied by similar variation in the rate of fault creep on the ATF, we analyzed crustal motion data derived from more than a decade of continuous GPS measurements in central Italy. We used the TDEFNODE software to parameterize the ATF using the available high

  8. Characterization of the Monument Hill fault system and implications for the active tectonics of the Red Rock Valley, Southwestern Montana

    NASA Astrophysics Data System (ADS)

    Regalla, Christine A.; Anastasio, David J.; Pazzaglia, Frank J.

    2007-08-01

    New geologic mapping, morphologic fault scarp modeling, and geomorphic metrics in the Red Rock Valley, southwestern Montana, help characterize the Quaternary history of the virtually unstudied Monument Hill fault and tectonics of the youthful and seismically active Red Rock graben. Two generations of Pleistocene surface ruptures are preserved along the Monument Hill fault. Similarity in rupture ages along multiple strands, determined from offset alluvial surfaces and morphologic modeling, suggest earthquake clusters at 22-32 ka and possibly >160 ka. Quaternary activity along the Monument Hill fault is also reflected in elongate drainage basins and channel profiles with anomalously steep reaches coincident with mapped faults. An anticlinal accommodation zone at Kidd accommodates a change in fault polarity between the en echelon Monument Hill and Red Rock faults and a northward decrease in extension within the Red Rock graben. The unique rupture histories of the Monument Hill and Red Rock faults, however, suggest the systems are not seismogenically linked and that the accommodation zone serves as a rupture barrier. The geometry, interconnectivity, and kinematics of faults in the Red Rock Valley may represent a snapshot of the early stages of extension applicable to the evolution of other Northern Basin and Range grabens.

  9. Redefining Medlicott-Wadia's main boundary fault from Jhelum to Yamuna: An active fault strand of the main boundary thrust in northwest Himalaya

    NASA Astrophysics Data System (ADS)

    Thakur, V. C.; Jayangondaperumal, R.; Malik, M. A.

    2010-06-01

    The MBT demarcates a tectonic boundary between the Tertiary Sub Himalaya and the pre-Tertiary Lesser Himalaya. South of the MBT, another tectonically important fault extends from Muzaffarabad and Riasi in Jammu-Kashmir to Bilaspur and Nahan in Himachal. Medlicott and Wadia had designated this fault the Main Boundary Fault (MBF) in Simla Hills and Jammu region respectively. In between these two areas, later workers gave local-area names to the MBF as the Riasi Thrust in Jammu, Palampur Thrust in Kangra, Bilaspur Thrust in Simla Hills and Nahan Thrust in Sirmur. We have reviewed and established the tectonostratigraphic framework and physical continuity of the lower Tertiary belt and the MBF. The lower Tertiary belt, lying south of the MBT, has characteristic tectonostratigraphic setting with discontinuous bodies of stromatolite-bearing Proterozoic limestone overlain with depositional contact by the Paleocene-lower part Middle Eocene marine Subathu/Patala formation which in turn overlain by the Upper Oligocene-Lower Miocene non-marine Dharamsala/Murree Formation. To avoid confusion with the MBT, we designate collectively the MBF and related faults as the Medlicott-Wadia Thrust (MWT). The MWT extends east of Hazara-Kashmir syntaxis to river Yamuna, covering a distance of ˜ 700 km. Further east of Yamuna, the lower Tertiary belt pinches out and the MWT merges with the sensuo-stricto MBT. The Proterozoic limestone represents the basement over which the lower Tertiary sediments were deposited. The limestone basement with its cover was detached by the MWT, exhuming to the surface and thrusting over largely the Siwalik group. The reactivated Balakot-Bagh Fault, causative fault for the 2005 Kashmir earthquake, extends southeast with right-step to the Riasi Thrust. The Riasi Thrust shows evidence of reactivation and active tectonic activity in Jammu region. It extends further east to the Palampur Thrust in Kangra reentrant, which lies within the 1905 Kangra earthquake

  10. Late Cenozoic and active transpression along the Dead Sea fault in northwestern Syria

    NASA Astrophysics Data System (ADS)

    Gomez, F.; Radwan, Y.; Al-Najjar, H.; Layyous, I.; Darkal, A.; Darawcheh, R.; Sbeinati, R.; Meghraoui, M.; Al-Ghazzi, R.; Barazangi, M.

    2004-12-01

    The left-lateral Dead Sea fault (DSF) constitutes the boundary between the Arabian and African plates as they converge with Eurasia. In northwestern Syria, the DSF emerges from the 200-km-long "Lebanese" restraining bend with a single fault trace that bifurcates at the Ghab Valley. Despite locally transtensional features like the Ghab Valley, neotectonic activity along the northern DSF in northwestern Syria demonstrates that oblique plate motions result in an overall transpressive tectonic regime. Constraints on recent tectonism are provided by neotectonic mapping, trenching of Holocene sediments, and analyses of a 20-meter pixel digital elevation model constructed using InSAR. Evidence of Neogene and Quaternary displacement on the northern DSF includes truncation and offset of a large, early Pliocene volcano. Preliminary estimates of the left-lateral slip rate south of the Ghab Valley are 4 - 7 mm / yr. In the Ghab Valley, hanging valleys, beheaded drainages, and displaced late Quaternary lava flows demonstrate that plate motion is distributed among several active fault branches. Furthermore, warping and tilting of a late Miocene - early Pliocene paleo-surface, as well as morphometric analyses, suggest that tectonic uplift of the Syrian Coastal Range has been coincident with recent left-lateral faulting on the adjacent DSF. Uplift is asymmetrically distributed in that it is almost exclusively located in the western block of the DSF. The region of uplift is greatest adjacent to the Ghab Valley. This may reflect a contribution from isostatic uplift as a result of the local transtension. We suggest that a convergent component of plate motion is responsible for uplift of the entire Syrian Coastal Range. Our hypothesis is consistent with regional plate tectonic models that predict 10° - 25° obliquity between the Arabian-African plate motion and the strike of the northern Dead Sea fault.

  11. 3D Fault modeling of the active Chittagong-Myanmar fold belt, Bangladesh

    NASA Astrophysics Data System (ADS)

    Peterson, D. E.; Hubbard, J.; Akhter, S. H.; Shamim, N.

    2013-12-01

    The Chittagong-Myanmar fold belt (CMFB), located in eastern Bangladesh, eastern India and western Myanmar, accommodates east-west shortening at the India-Burma plate boundary. Oblique subduction of the Indian Plate beneath the Burma Plate since the Eocene has led to the development of a large accretionary prism complex, creating a series of north-south trending folds. A continuous sediment record from ~55 Ma to the present has been deposited in the Bengal Basin by the Ganges-Brahmaputra-Meghna rivers, providing an opportunity to learn about the history of tectonic deformation and activity in this fold-and-thrust belt. Surface mapping indicates that the fold-and-thrust belt is characterized by extensive N-S-trending anticlines and synclines in a belt ~150-200 km wide. Seismic reflection profiles from the Chittagong and Chittagong Hill Tracts, Bangladesh, indicate that the anticlines mapped at the surface narrow with depth and extend to ~3.0 seconds TWTT (two-way travel time), or ~6.0 km. The folds of Chittagong and Chittagong Hill Tracts are characterized by doubly plunging box-shaped en-echelon anticlines separated by wide synclines. The seismic data suggest that some of these anticlines are cored by thrust fault ramps that extend to a large-scale décollement that dips gently to the east. Other anticlines may be the result of detachment folding from the same décollement. The décollement likely deepens to the east and intersects with the northerly-trending, oblique-slip Kaladan fault. The CMFB region is bounded to the north by the north-dipping Dauki fault and the Shillong Plateau. The tectonic transition from a wide band of E-W shortening in the south to a narrow zone of N-S shortening along the Dauki fault is poorly understood. We integrate surface and subsurface datasets, including topography, geological maps, seismicity, and industry seismic reflection profiles, into a 3D modeling environment and construct initial 3D surfaces of the major faults in this

  12. Active faulting and tectonics of the Ningxia-Hui Autonomous Region, China

    NASA Astrophysics Data System (ADS)

    Qidong, Deng; Sung, Fengmin; Zhu, Shilong; Li, Mengluan; Wang, Tielin; Zhang, Weiqi; Burchfiel, B. C.; Molnar, Peter; Zhang, Peizhen

    1984-06-01

    Strike-slip, thrust, and normal faulting all seem to play an active role in the tectonics of Ningxia. In the southernmost part of the region a major left-lateral strike-slip fault enters the region from the neighboring Gansu province to the west and trends about S65°E. This fault is very clear on Landsat imagery and on aerial photos, and the portion in eastern Gansu and Ningxia broke in the Haiyuan earthquake of December 16, 1920. Displacements of 5-10 m caused by that earthquake are clear in numerous localities and accord with a revised value of the seismic moment of 1.2×1021N m. The eastern end of the Haiyuan fault terminates in a narrow south trending fold and thrust zone. Several other similar, north to northwest trending fold and thrust belts are present in the area about 50-200 km northeast of the Haiyuan fault and divide it into small, apparently relatively undeformed blocks 10-40 km in dimensions. The geometry of the structures in the fold and thrust zones and the apparently shallow depths at the time of deformation suggest that current deformation is similar to that that occurred in the fold and thrust belt of the Idaho-Wyoming Rocky Mountains. North of this area, both the Helan Shan (a horst) and the Yinchuan graben are bounded by clear, active northerly trending normal faults, in some cases with right-lateral strike-slip components. The overall deformation, hence, seems to include dominant components of east-west left-lateral strike-slip movement, northeast-southwest crustal shortening, and northwest-southeast extension. We interpret the extension as a response to a northeast directed force applied to the Ordos block and both this northeast directed force and the left-lateral slip on the Haiyuan fault to the eastward displacement of material on the northeast edge of the Tibetan plateau with respect to Eurasia north of it.

  13. Paleoseismic activity at the southern termination of Alhama de Murcia fault (Southeastern Betics, Spain): geomporphic and trenching evidence along a slow moving fault

    NASA Astrophysics Data System (ADS)

    Ortuño, M. C.; Masana, E.; Buylaert, J. P.; Canora, C.; Cunha, P.; García-Meléndez, E.; Martínez-Díaz, J.; Murrey, A.; Sohbati, R.; Štěpančíková, P.

    2009-12-01

    The Alhama de Murcia fault (FAM) is part of the Eastern Betics Shear Zone (EBSZ), one of the most seismically active regions of the Iberian Peninsula. The fault, of NE-SW strike, is prominent along an almost 100 km trace and constitutes the geomorphologic southeastern boundary between a train of ranges situated in the NW block (Eg. Las Estancias and La Tercia ranges) and the Plioquaternary basins in the SE block (Eg. Huercal-Overa and Guadalentin-Segura basins). Its activity as a senestral strike-slip fault with local reverse component has been well documented in its central and north-eastern segments in previous works. In this study, we have focused on its south-western termination, that has a special interest for the risk assessment since no historical damaging earthquake has been associated to it. At this part, the FAM has generated a splay-like structure composed of three main branches referred as septentrional, medium and meridional tips. Owing to a more E-W orientation of this fault arrangement compared to the northernmost segment, the faults are expected to have a greater reverse component. This assumption is corroborated by the geomorphological and geological survey, which has shown that the area is compartmentalized in tectonic highs that result from the folding and faulting of Plioquaternary units. The paleosismological survey and OSL dating of sediments in 5 trenches along the medium and meridional fault branches have permitted to better understand the most recent tectonic activity of the area: Alluvial fans draining from Las Estancias range have been blocked, strongly folded and faulted repeatedly in a complex manner during the Middle-Late Pliestocene. The occurrence of, at least, two paleoearthquakes during the last 150 ka has been recognized in each of the trenches, and a third event, in one of them. The structures observed suggest that the strike-slip component decreases gradually towards the western end, while the vertical component increases. A ~ 0

  14. Episodic nature of earthquake activity in stable continental regions revealed by palaeoseismicity studies of Australian and North American Quaternary faults

    USGS Publications Warehouse

    Crone, A.J.; Machette, M.N.; Bowman, J.R.

    1997-01-01

    Palaeoseismic investigations of recent faulting in stable continental regions of Australia, North America and India show that these faults typically have a long-term behaviour characterised by episodes of activity separated by quiescent intervals of at least 10 000 and commonly 100 000 years or more. Long recurrence intervals such as these are well documented by detailed studies of the faults that ruptured during the 1986 Marryat Creek, South Australia and 1988 Tennant Creek, Northern Territory earthquakes. Thus, neotectonic features associated with stable continental region faults such as scarps and grabens commonly have subtle geomorphic expression and may be poorly preserved. Many potentially hazardous faults in stable continental regions are aseismic, which is one reason why the inventory of these faults is incomplete. Although they may be currently aseismic, faults in stable continental regions that are favourably oriented for movement in the current stress field could produce damaging earthquakes, often in unexpected places. Comprehensive palaeoseismic investigations of modern and prehistoric faulting events in stable continental regions are needed to understand the long-term behaviour of these faults, and thereby, improve seismic-hazard assessments.

  15. Tectonics and Quaternary sequence development of basins along the active Vienna Basin strike-slip fault

    NASA Astrophysics Data System (ADS)

    Salcher, B.; Lomax, J.; Meurers, B.; Smit, J.; Preusser, F.; Decker, K.

    2012-04-01

    The Vienna Basin strike-slip fault is a continent scale active fault extending over a distance of some 300 km from the Eastern Alps through the Vienna Basin into the Western Carpathians. Sinistral movement causes the formation of several tight Pleistocene strike-slip basins within the older Miocene Vienna Basin. These sub-basins not only have a high relevance for groundwater exploitation but their fault activities depict serious seismic hazards. Basins are filled with fluvial sediments from the Danube and, closer to the Alpine front, with thick alluvial fan deposits. However, knowledge on the stratigraphy and tectonics is sparse and rather limited to the Miocene part of the Vienna Basin as it hosts giant hydrocarbon fields. This study tackles two major questions: (i) What is the effect of Quaternary climatic oscillations and subsidence on the sequence development of the alluvial fans and (ii) what is the deformation style of these basins? To answer (i) we present a series of new OSL ages and biotic data from both, surface and cores, to better constrain the timing of fan activity, fan abandonment but also to constrain the onset of Pleistocene basin formation. For (ii) we utilize information from unparalleled geophysical and geological data. Specifically we utilize industrial Bouguer gravity's derivatives to highlight shallow structures and to compensate for the lag of fault trace information. The integration of geological and geophysical data highlights textbook-like models of strike-slip basins, with typical features like Riedel shears with intervening relay ramps, en-echelon sidewall faults and a cross-basin fault zone delimiting opposite depocenters. The infill reflects a distinct cyclicity with thick sequences of coarse sediments deposited during colder periods and thin sequences of paleosol and flood sediments deposited during warmer periods. Ages indicate main activity around the short peak glacial periods and basin formation starting c. 300 ka ago. The

  16. Active faults on the eastern flank of Etna volcano (Italy) monitored through soil radon measurements

    NASA Astrophysics Data System (ADS)

    Neri, M.; Giammanco, S.; Ferrera, E.; Patanè, G.; Zanon, V.

    2012-04-01

    This study concerns measurements of radon and thoron emissions from soil carried out in 2004 on the unstable eastern flank of Mt. Etna, in a zone characterized by the presence of numerous seismogenic and aseismic faults. The statistical treatment of the geochemical data allowed recognizing anomaly thresholds for both parameters and producing distribution maps that highlighted a significant spatial correlation between soil gas anomalies and tectonic lineaments. In particular, the highest anomalies were found at the intersection between WNW-ESE and NW-SE -running faults. The seismic activity occurring in and around the study area during 2004 was analyzed, producing maps of hypocentral depth and released seismic energy. These maps revealed a progressive deepening of hypocenters from NW to SE, with the exception of a narrow zone in the central part of the area, with a roughly WNW-ESE direction. Also, the highest values of seismic energy were released during events in the southern and northwestern sectors of the area. Both radon and thoron anomalies were located in areas affected by relatively deep (5-10 km depth) seismic activity, while less evident correlation was found between soil gas anomalies and the released seismic energy. This study confirms that mapping the distribution of radon and thoron in soil gas can reveal hidden faults buried by recent soil cover or faults that are not clearly visible at the surface. The correlation between soil gas data and earthquake depth and intensity can give some hints on the source of gas and/or on fault dynamics. Lastly, an important spin-off of this study is the recognition of some areas where radon activity was so high (>50000 Bq/m3) that it may represent a potential hazard to the local population. In fact, radon is the leading cause of lung cancer after cigarette smoke for long exposures and, due to its molecular weight, it accumulates in underground rooms or in low ground, particularly where air circulation is low or absent

  17. Map showing recently active breaks along the San Andreas Fault between Pt. Delgada and Bolinas Bay, California

    USGS Publications Warehouse

    Brown, Robert D.; Wolfe, Edward W.

    1970-01-01

    This strip map is one of a series of maps showing recently active fault breaks along the San Andreas and other active faults in California. It is designed to inform persons who are concerned with land use near the fault of the location of those fault breaks that have moved recently. The lines on the map are lines of rupture and creep that can be identified by field evidence and that clearly affect the present surface of the land. Map users should keep in mind that these lines are intended primarily as guides to help locate the fault; the mapped lines are not necessarily shown with the precision demanded by some engineering or land utilization needs.

  18. Integrated analysis of seismological, gravimetric and structural data for identification of active faults geometries in Abruzzo and Molise areas (Italy)

    NASA Astrophysics Data System (ADS)

    Gaudiosi, Germana; Nappi, Rosa; Alessio, Giuliana; Porfido, Sabina; Cella, Federico; Fedi, Maurizio; Florio, Giovanni

    2015-04-01

    This paper deals with an interdisciplinary research that has been carried out for more constraining the active faults and their geometry of Abruzzo - Molise areas (Central-Southern Apennines), two of the most active areas from a geodynamic point of view of the Italian Apennines, characterized by the occurrence of intense and widely spread seismic activity. An integrated analysis of structural, seismic and gravimetric (Gaudiosi et al., 2012) data of the area has been carried out through the Geographic Information System (GIS) which has provided the capability for storing and managing large amount of spatial data from different sources. In particular, the analysis has consisted of these main steps: (a) collection and acquisition of aerial photos, numeric cartography, Digital Terrain Model (DTM) data, geophysical data; (b) generation of the vector cartographic database and alpha-numerical data; c) image processing and features classification; d) cartographic restitution and multi-layers representation. In detail three thematic data sets have been generated "fault", "earthquake" and "gravimetric" data sets. The fault Dataset has been compiled by examining and merging the available structural maps, and many recent geological and geophysical papers of literature. The earthquake Dataset has been implemented collecting seismic data by the available historical and instrumental Catalogues and new precise earthquake locations for better constraining existence and activity of some outcropping and buried tectonic structures. Seismic data have been standardized in the same format into the GIS and merged in a final catalogue. For the gravimetric Dataset, the Multiscale Derivative Analysis (MDA) of the gravity field of the area has been performed, relying on the good resolution properties of the Enhanced Horizontal Derivative (EHD) (Fedi et al., 2005). MDA of gravity data has allowed localization of several trends identifying anomaly sources whose presence was not previously

  19. Effects of fluid-rock interactions on faulting within active fault zones - evidence from fault rock samples retrieved from international drilling projects

    NASA Astrophysics Data System (ADS)

    Janssen, C.; Wirth, R.; Kienast, M.; Yabe, Y.; Sulem, J.; Dresen, G. H.

    2015-12-01

    Chemical and mechanical effects of fluids influence the fault mechanical behavior. We analyzed fresh fault rocks from several scientific drilling projects to study the effects of fluids on fault strength. For example, in drill core samples on a rupture plane of an Mw 2.2 earthquake in a deep gold mine in South Africa the main shock occurred on a preexisting plane of weakness that was formed by fluid-rock interaction (magnesiohornblende was intensively altered to chlinochlore). The plane acted as conduit for hydrothermal fluids at some time in the past. The chemical influence of fluids on mineralogical alteration and geomechanical processes in fault core samples from SAFOD (San Andreas Fault Observatory at Depth) is visible in pronounced dissolution-precipitation processes (stylolites, solution seams) as well as in the formation of new phases. Detrital quartz and feldspar grains are partially dissolved and replaced by authigenic illite-smectite (I-S) mixed-layer clay minerals. Transmission Electron Microscopy (TEM) imaging of these grains reveals that the alteration processes and healing were initiated within pores and small intra-grain fissures. Newly formed phyllosilicates growing into open pore spaces likely reduced the fluid permeability. The mechanical influence of fluids is indicated by TEM observations, which document open pores that formed in-situ in the gouge material during or after deformation. Pores were possibly filled with formation water and/or hydrothermal fluids suggesting elevated fluid pressure preventing pore collapse. Fluid-driven healing of fractures in samples from SAFOD and the DGLab Gulf of Corinth project is visible in cementation. Cathodoluminescence microscopy (CL) reveals different generations of calcite veins. Differences in CL-colors suggest repeated infiltration of fluids with different chemical composition from varying sources (formation and meteoric water).

  20. Active fault mapping in Karonga-Malawi after the December 19, 2009 Ms 6.2 seismic event

    NASA Astrophysics Data System (ADS)

    Macheyeki, A. S.; Mdala, H.; Chapola, L. S.; Manhiça, V. J.; Chisambi, J.; Feitio, P.; Ayele, A.; Barongo, J.; Ferdinand, R. W.; Ogubazghi, G.; Goitom, B.; Hlatywayo, J. D.; Kianji, G. K.; Marobhe, I.; Mulowezi, A.; Mutamina, D.; Mwano, J. M.; Shumba, B.; Tumwikirize, I.

    2015-02-01

    The East African Rift System (EARS) has natural hazards - earthquakes, volcanic eruptions, and landslides along the faulted margins, and in response to ground shaking. Strong damaging earthquakes have been occurring in the region along the EARS throughout historical time, example being the 7.4 (Ms) of December 1910. The most recent damaging earthquake is the Karonga earthquake in Malawi, which occurred on 19th December, 2009 with a magnitude of 6.2 (Ms). The earthquake claimed four lives and destroyed over 5000 houses. In its effort to improve seismic hazard assessment in the region, Eastern and Southern Africa Seismological Working Group (ESARSWG) under the sponsorship of the International Program on Physical Sciences (IPPS) carried out a study on active fault mapping in the region. The fieldwork employed geological and geophysical techniques. The geophysical techniques employed are ground magnetic, seismic refraction and resistivity surveys but are reported elsewhere. This article gives findings from geological techniques. The geological techniques aimed primarily at mapping of active faults in the area in order to delineate presence or absence of fault segments. Results show that the Karonga fault (the Karonga fault here referred to as the fault that ruptured to the surface following the 6th-19th December 2009 earthquake events in the Karonga area) is about 9 km long and dominated by dip slip faulting with dextral and insignificant sinistral components and it is made up of 3-4 segments of length 2-3 km. The segments are characterized by both left and right steps. Although field mapping show only 9 km of surface rupture, maximum vertical offset of about 43 cm imply that the surface rupture was in little excess of 14 km that corresponds with Mw = 6.4. We recommend the use or integration of multidisciplinary techniques in order to better understand the fault history, mechanism and other behavior of the fault/s for better urban planning in the area.

  1. Review of magnetic field monitoring near active faults and volcanic calderas in California: 1974-1995

    USGS Publications Warehouse

    Mueller, R.J.; Johnston, M.J.S.

    1998-01-01

    Differential magnetic fields have been monitored along the San Andreas fault and the Long Valley caldera since 1974. At each monitoring location, proton precession magnetometers sample total magnetic field intensity at a resolution of 0.1 nT or 0.25 nT. Every 10 min, data samples are transmitted via satellite telemetry to Menlo Park, CA for processing and analysis. The number of active magnetometer sites has varied during the past 21 years from 6 to 25, with 12 sites currently operational. We use this network to identify magnetic field changes generated by earthquake and volcanic processes. During the two decades of monitoring, five moderate earthquakes (M5.9 to M7.3) have occurred within 20 km of magnetometer sites located along the San Andreas fault and only one preseismic signal of 1.5 nT has been observed. During moderate earthquakes, coseismic magnetic signals, with amplitudes from 0.7 nT to 1.3 nT, have been identified for 3 of the 5 events. These observations are generally consistent with those calculated from simple seismomagnetic models of these earthquakes and near-fault coseismic magnetic field disturbances rarely exceed one nanotesla. These data are consistent with the concept of low shear stress and relatively uniform displacement of the San Andreas fault system as expected due to high pore fluid pressure on the fault. A systematic decrease of 0.8-1 nT/year in magnetic field has occurred in the Long Valley caldera since 1989. These magnetic field data are similar in form to observed geodetically measured displacements from inflation of the resurgent dome. A simple volcanomagnetic model involving pressure increase of 50 MPa/a at a depth of 7 km under the resurgent dome can replicate these magnetic field observations. This model is derived from the intrusion model that best fits the surface deformation data. ?? 1998 Elsevier Science B.V.

  2. Fault recovery characteristics of the fault tolerant multi-processor

    NASA Technical Reports Server (NTRS)

    Padilla, Peter A.

    1990-01-01

    The fault handling performance of the fault tolerant multiprocessor (FTMP) was investigated. Fault handling errors detected during fault injection experiments were characterized. In these fault injection experiments, the FTMP disabled a working unit instead of the faulted unit once every 500 faults, on the average. System design weaknesses allow active faults to exercise a part of the fault management software that handles byzantine or lying faults. It is pointed out that these weak areas in the FTMP's design increase the probability that, for any hardware fault, a good LRU (line replaceable unit) is mistakenly disabled by the fault management software. It is concluded that fault injection can help detect and analyze the behavior of a system in the ultra-reliable regime. Although fault injection testing cannot be exhaustive, it has been demonstrated that it provides a unique capability to unmask problems and to characterize the behavior of a fault-tolerant system.

  3. The COMET initiative database: progress and activities update (2014).

    PubMed

    Gargon, Elizabeth; Williamson, Paula R; Altman, Doug G; Blazeby, Jane M; Clarke, Mike

    2015-01-01

    The COMET Initiative database is a repository of studies relevant to the development of core outcome sets (COS). Use of the website continues to increase, with more than 16,500 visits in 2014 (36 % increase over 2013), 12,257 unique visitors (47 % increase), 9780 new visitors (43 % increase) and a rise in the proportion of visits from outside the UK (8565 visits; 51 % of all visits). By December 2014, a total of 6588 searches had been completed, with 2383 in 2014 alone (11 % increase). The growing awareness of the need for COS is reflected in the website and database usage figures. PMID:26558998

  4. Late Quaternary Activity and Seismogenic Potential of the Gonave Microplate: Plantain Garden Strike-Slip Fault Zone of Eastern Jamaica

    NASA Astrophysics Data System (ADS)

    Mann, P.; Prentice, C.; King, W.; Demets, C.; Wiggins-Grandison, M.; Benford, B.

    2008-12-01

    At the longitude of Jamaica, Caribbean (Carib)-North America (Noam) plate motion of 19 ± 2 mm/a is carried by two parallel, left-lateral strike-slip faults, the Oriente fault zone, immediately south of Cuba, and the Enriquillo-Plantain Garden fault zone (EPGFZ), which lies 100-150 km further south. It has been postulated that the lithosphere between these faults constitutes an independent Gonave microplate that has formed in response to the ongoing collision between the leading edge of Carib in Hispaniola and the Bahama carbonate platform. GPS measurements in Jamaica and Hispanola is supportive of the microplate hypothesis and indicates that roughly half of Carib-Noam plate motion (8-14 mm/a) is carried by the EPGFZ of southern Hispaniola and eastern Jamaica. This study applies geomorphic and paleoseismic methods as a direct test of the activity and amount of microplate motion carried on the Plantain Garden fault segment of eastern Hispaniola and how this motion is distributed across a large restraining bend that has formed the island of Jamaica since the late Miocene. The EPFZ curves gently to the northeast and forming a steep mountain front to the Blue Mountains restraining bend with elevations up to 2200 m. Geomorphic fault-related features along the mountain front fault zone include left-laterally deflected rivers and streams, but no small scale features indicative of Holocene activity. River and stream deflections range from 0.1 to 0.5 km. We identified and trenched the most active trace of the mountain front fault at the Morant River where the fault is characterized by a 1.5-m-wide sub-vertical fault zone juxtaposing sheared alluvium and fault Cretaceous basement rocks This section is overlain by a 6-m-thick fluvial terrace. Trenching in the unfaulted terrace immediately overlying the fault trace revealed radiocarbon and OSL ages ranging from 20 to 21 ka that are consistent with a prominent unfaulted alluvial fan along the projection of this fault 1.5 km to

  5. Viscous roots of active seismogenic faults revealed by geologic slip rate variations

    NASA Astrophysics Data System (ADS)

    Cowie, P. A.; Scholz, C. H.; Roberts, G.; Faure Walker, J.; Steer, P.

    2013-12-01

    Viscous flow at depth contributes to elastic strain accumulation along seismogenic faults during both post-seismic and inter-seismic phases of the earthquake cycle. Evaluating the importance of this contribution is hampered by uncertainties regarding (i) the extent to which viscous deformation occurs in shear zones or by distributed flow within the crust and/or upper mantle, and (ii) the value of the exponent, n, in the flow law that relates strain rate to applied stress. Geodetic data, rock deformation experiments, and field observations of exhumed (inactive) faults provide strong evidence for non-linear viscous flow but may not fully capture the long term, in situ behaviour of active fault zones. Here we demonstrate that strain rates derived from Holocene offsets on seismogenic normal faults in the actively uplifting and extending central and southern Italian Apennines may be used to address this issue. The measured strain rates, averaged over a time scale of 104 years, exhibit a well-defined power-law dependence on topographic elevation with a power-law exponent ≈ 3.0 (2.7 - 3.4 at 95% CI; 2.3 - 4.0 at 99% CI). Contemporary seismicity indicates that the upper crust in this area is at the threshold for frictional failure within an extensional stress field and therefore differential stress is directly proportional to elevation. Our data thus imply a relationship between strain rate and stress that is consistent with non-linear viscous flow, with n ≈ 3, but because the measurements are derived from slip along major crustal faults they do not represent deformation of a continuum. We know that, down-dip of the seismogenic part of active faults, cataclasis, hydrous alteration, and shear heating all contribute to grain size reduction and material weakening. These processes initiate localisation at the frictional-viscous transition and the development of mylonitic shear zones within the viscous regime. Furthermore, in quartzo-feldspathic crust, mylonites form a

  6. Active faulting in the Inner California Borderlands: new constraints from high-resolution multichannel seismic and multibeam bathymetric data.

    NASA Astrophysics Data System (ADS)

    Bormann, J. M.; Holmes, J. J.; Sahakian, V. J.; Klotsko, S.; Kent, G.; Driscoll, N. W.; Harding, A. J.; Wesnousky, S. G.

    2014-12-01

    Geodetic data indicate that faults offshore of Southern California accommodate 6-8 mm/yr of dextral Pacific-North American relative plate motion. In the Inner California Borderlands (ICB), modern strike-slip deformation is overprinted on topography formed during plate boundary reorganization 30-15 Ma. Despite its proximity to urban Southern California, the hazard posed by active faults in the ICB remains poorly understood. We acquired a 4000-line-km regional grid of high-resolution, 2D multichannel seismic (MCS) reflection data and multibeam bathymetry to examine the fault architecture and tectonic evolution of the ICB. We interpret the MCS data using a sequence stratigraphic approach to establish a chronostratigraphy and identify discrete episodes of deformation. We present our results in a regional fault model that distinguishes active deformation from older structures. Significant differences exist between our model of ICB deformation and existing models. Mounting evidence suggests a westward temporal migration of slip between faults in the ICB. In the eastern ICB, slip on the Newport-Inglewood/Rose Canyon fault and the neighboring Coronado Bank fault (CBF) diminishes to the north and appears to decrease over time. Undeformed Late Pliocene sediments overlie the northern extent of the CBF and the breakaway zone of the purported Oceanside Blind Thrust. Therefore, CBF slip rate estimates based on linkage with the Palos Verdes fault to the north are unwarranted. Deformation along the San Mateo, San Onofre, and Carlsbad trends is best explained as localized deformation resulting from geometrical complexities in a dextral strike-slip fault system. In the western ICB, the San Diego Trough fault (SDTF) offsets young sediments between the US/Mexico border and the eastern margin of Avalon Knoll, where the fault is spatially coincident with the San Pedro Basin fault (SPBF). Farther west, the San Clemente fault (SCF) has a strong linear bathymetric expression. The length

  7. Geomorphic signal of active faulting at the northern edge of Lut Block: Insights on the kinematic scenario of Central Iran

    NASA Astrophysics Data System (ADS)

    Calzolari, Gabriele; Della Seta, Marta; Rossetti, Federico; Nozaem, Reza; Vignaroli, Gianluca; Cosentino, Domenico; Faccenna, Claudio

    2016-01-01

    Recent works documented Neogene to Quaternary dextral strike-slip tectonics along the Kuh-e-Sarhangi and Kuh-e-Faghan intraplate strike-slip faults at the northern edge of the Lut Block of Central Iran, previously thought to be dominated by sinistral strike-slip deformation. This work focuses on the evidence of Quaternary activity of one of these fault systems, in order to provide new spatiotemporal constraints on their role in the active regional kinematic scenario. Through geomorphological and structural investigation, integrated with optically stimulated luminescence dating of three generations of alluvial fans and fluvial terraces (at ~53, ~25, and ~6 ka), this study documents (i) the topographic inheritance of the long-term (Myr) punctuated history of fault nucleation, propagation, and exhumation along the northern edge of Lut Block; (ii) the tectonic control on drainage network evolution, pediment formation, fluvial terraces, and alluvial fan architecture; (iii) the minimum Holocene age of Quaternary dextral strike-slip faulting; and (iv) the evidence of Late Quaternary fault-related uplift localized along the different fault strands. The documented spatial and temporal constraints on the active dextral strike-slip tectonics at the northern edge of Lut Block provide new insights on the kinematic model for active faulting in Central Iran, which has been reinterpreted in an escape tectonic scenario.

  8. Database activity in the Italian Astronet: DIRA 2

    NASA Technical Reports Server (NTRS)

    Benacchio, L.; Nanni, M.

    1992-01-01

    The development and utilization of informational archives and databases started, in the Italian Astronet Project, in the middle of 1983. In that year, a small group of astronomers and some more technical people met together in an Astronet working group, with a common, painful experience in managing astronomical catalogues and archives with computers. Nowadays, some years later, some software packages and the contents of both, a relative general database and several local databases represent the work and the effort of the group. The systems have been conceived and developed keeping in mind the original goal of the group: to allow the single atronomer to make a free use of original data. The main package (DIRA) was rewritten, after some years of use, to fully take advantage of the several suggestions of the astronomer that used it and gathered experiences in the astronomical catalog's management. A more technical goal was to install the whole system, born and developed in the vms environment, on unix and unix-like systems. This new version, DIRA2, has a new user interface, a query language with SQL style commands supporting numerical and character functions also and a set of commands to create new catalogues from existing data. The graphics commands are also more powerful with respect to the previous version. DIRA (and DIRA2 of course) philosophy and design are very simple and proved to be very appreciated by astronomers, namely, to normalize and homogenize, at minimum, astronomical catalogues, to collect satisfactory astronomical documentation on their contents and, finally, to allow an astronomical approach to the dialogue with the database. DIRA2 is currently used in most Italian astronomical institutes to retrieve data from a still growing database of about 140 well documented and controlled astronomical catalogues, for the identification of objects and the preparation of a 'medium size' survey, in astrometry and in the creation of new catalogues.

  9. Recent tectonic activity on Mercury revealed by small thrust fault scarps

    NASA Astrophysics Data System (ADS)

    Watters, Thomas R.; Daud, Katie; Banks, Maria E.; Selvans, Michelle M.; Chapman, Clark R.; Ernst, Carolyn M.

    2016-10-01

    Large tectonic landforms on the surface of Mercury, consistent with significant contraction of the planet, were revealed by the flybys of Mariner 10 in the mid-1970s. The MErcury Surface, Space ENvironment, GEochemistry, and Ranging (MESSENGER) mission confirmed that the planet's past 4 billion years of tectonic history have been dominated by contraction expressed by lobate fault scarps that are hundreds of kilometres long. Here we report the discovery of small thrust fault scarps in images from the low-altitude campaign at the end of the MESSENGER mission that are orders of magnitude smaller than the large-scale lobate scarps. These small scarps have tens of metres of relief, are only kilometres in length and are comparable in scale to small young scarps on the Moon. Their small-scale, pristine appearance, crosscutting of impact craters and association with small graben all indicate an age of less than 50 Myr. We propose that these scarps are the smallest members of a continuum in scale of thrust fault scarps on Mercury. The young age of the small scarps, along with evidence for recent activity on large-scale scarps, suggests that Mercury is tectonically active today and implies a prolonged slow cooling of the planet's interior.

  10. Prospecting with ground radar in an active creep-fault zone

    NASA Astrophysics Data System (ADS)

    Ibanez Garduno, Dolores; Lorenzo Cimadevila, Henrique; Alvarez Bejar, Roman; Garduno Monroy, Victor H.

    2000-04-01

    In different places of Morelia, Michoacan, Mexico, there are evidences of four active geologic creep-faults system in. These events have damages (cracking and landslides) in the civil building (Garduno M., et. al, 1998; Garduno M., et. al, 1999; Lermo S., et. al., 1999). In order to find these structures in the first 10 m of depth, region where we have the influence in civil building, we carried out a geophysical study with georadar technique. We made 15 sounding in the fault zone to join the results to preliminar geologic studies in order to improve the security rules in the high risk places. In this work we show the results of three sounds with georadar, as well as the final Bidimensional Model effected with the technique of tracing of ray.

  11. On the possible fault activation induced by UGS in depleted reservoirs

    NASA Astrophysics Data System (ADS)

    Feronato, Massimiliano; Gambolati, Giuseppe; Janna, Carlo; Teatini, Pietro; Tosattto, Omar

    2014-05-01

    Underground gas storage (UGS) represents an increasingly used approach to cope with the growing energy demand and occurs in many countries worldwide. Gas is injected in previously depleted deep reservoirs during summer when consumption is limited and removed in cold season mainly for heating. As a major consequence the pore pressure p within a UGS reservoir fluctuates yearly between a maximum close to the value pi prior to the field development and a minimum usually larger than the lowest pressure experienced by the reservoir at the end of its production life. The high frequency pressure fluctuations generally confine the pressure change volume to the reservoir volume without significantly involving the aquifers hydraulically connected to the hydrocarbon field (lateral and/or bottom waterdrive). The risk of UGS-induced seismicity is therefore restricted to those cases where existing faults cross or bound the reservoir. The possible risk of anthropogenic seismicity due to UGS operations is preliminary investigated by an advanced Finite Element (FE) - Interface Element (IE) 3-D elasto-plastic geomechanical model in a representative 1500 m deep reservoir bounded by a regional sealing fault and compartimentalized by an internal non-sealing thrust. Gas storage/production is ongoing with p ranging between pi in October/November and 60%pi in April/May. The yearly pressure fluctuation is assumed to be on the order of 50 bar. The overall geomechanical response of the porous medium has been calibrated by reproducing the vertical and horizontal cyclic displacements measured above the reservoir by advanced persistent scatterer interferometry. The FE-IE model shows that the stress variations remain basically confined within the gas field and negligibly propagate within the caprock and the waterdrive. Based on the Mohr-Coulomb failure criterion, IEs allow for the prediction of the fault activated area A, located at the reservoir depth as expected, and slip displacement d. A

  12. Review of active faults in the Borborema Province, Intraplate South America — Integration of seismological and paleoseismological data

    NASA Astrophysics Data System (ADS)

    Bezerra, Francisco H. R.; do Nascimento, Aderson F.; Ferreira, Joaquim M.; Nogueira, Francisco C.; Fuck, Reinhardt A.; Neves, Benjamim B. Brito; Sousa, Maria O. L.

    2011-10-01

    In this paper, we provide a review of the properties and behavior of active faults in the Borborema Province, northeastern Brazil, using instrumental, historical and paleoseismological records. The Borborema Province is one of the most seismically active parts of the South American stable continental region (the South American Platform). The Province encompasses an area ~ 900 km long and ~ 600 km wide. It is composed of a branching system of Neoproterozoic orogens, encompassing Archean and Proterozoic inliers deformed during the Brasiliano orogeny at ~ 750-500 Ma. Active faults reactivate shear zones or regional foliation and quartz veins or cut across the preexisting fabric. Active faults are usually strike-slip and generate events ≤ 5.2 m b, which we interpret as the lower limit for maximum possible earthquakes. Seismicity is concentrated in the upper crust down to a depth of 12 km. Earthquake sequences illuminated naturally occurring faults up to 40 km long and segments in the order of 0.5-2.6 km in faults related to induced seismicity. Earthquakes have a recurrence interval of ~ 15 years for M s = 4. Paleoseismological data indicate that although earthquakes associated with surface ruptures have not occurred in the last 200 years, they struck the region in the last ~ 100 ka. Paleoearthquakes have a recurrence interval of ~ 15.8 ka for magnitudes of ~ 5.5 M w in individual faults. Moreover, earthquake-induced soft-sediment deformation caused by events of at least 5.5-6.0 M s have occurred at least six times in the last 400-10 ka in one alluvial valley. Seismically defined faults are concentrated along the continental margin at the border of sedimentary basins as far as 250-300 km inland in areas of extended crust; faults in the paleoseismic record are also found in rift basins along this margin. Both records also reveal that active faults tend to be hydraulically conductive.

  13. FTAPE: A fault injection tool to measure fault tolerance

    NASA Technical Reports Server (NTRS)

    Tsai, Timothy K.; Iyer, Ravishankar K.

    1994-01-01

    The paper introduces FTAPE (Fault Tolerance And Performance Evaluator), a tool that can be used to compare fault-tolerant computers. The tool combines system-wide fault injection with a controllable workload. A workload generator is used to create high stress conditions for the machine. Faults are injected based on this workload activity in order to ensure a high level of fault propagation. The errors/fault ratio and performance degradation are presented as measures of fault tolerance.

  14. FTAPE: A fault injection tool to measure fault tolerance

    NASA Technical Reports Server (NTRS)

    Tsai, Timothy K.; Iyer, Ravishankar K.

    1995-01-01

    The paper introduces FTAPE (Fault Tolerance And Performance Evaluator), a tool that can be used to compare fault-tolerant computers. The tool combines system-wide fault injection with a controllable workload. A workload generator is used to create high stress conditions for the machine. Faults are injected based on this workload activity in order to ensure a high level of fault propagation. The errors/fault ratio and performance degradation are presented as measures of fault tolerance.

  15. FTAPE: A fault injection tool to measure fault tolerance

    NASA Astrophysics Data System (ADS)

    Tsai, Timothy K.; Iyer, Ravishankar K.

    1994-07-01

    The paper introduces FTAPE (Fault Tolerance And Performance Evaluator), a tool that can be used to compare fault-tolerant computers. The tool combines system-wide fault injection with a controllable workload. A workload generator is used to create high stress conditions for the machine. Faults are injected based on this workload activity in order to ensure a high level of fault propagation. The errors/fault ratio and performance degradation are presented as measures of fault tolerance.

  16. Active Strike-Slip Faulting in the Inner Continental Borderland, Southern California: Results From New High-Resolution Seismic Reflection Data

    NASA Astrophysics Data System (ADS)

    Conrad, J. E.; Ryan, H. F.; Sliter, R. W.

    2008-12-01

    The inner Continental Borderland offshore of southern California accommodates about 7 mm/yr of slip between the North American and Pacific plates. Nearly half of this total has previously been thought to be taken up on the Palos Verdes (PV) and Coronado Bank (CB) fault zones, which have been modeled as a single, continuous fault zone in recent seismic hazard assessments for southern California. Although these faults lie roughly on strike with each other, a connection between these faults has not been clearly demonstrated. Newly acquired high-resolution seismic reflection data indicate that the PV fault terminates southwest of Lasuen Knoll in a horsetail splay that becomes progressively buried to the south. The lack of a connection between the PV and CB fault zones implies that a significant amount of slip must be taken up elsewhere in the inner Continental Borderland. Two other significant offshore faults, the San Diego Trough (SDT) and San Pedro Basin (SPB) fault zones, lie about 10-15 km southwest of and sub parallel to the trace of the PV and CB faults. The SDT fault zone extends from south of the Mexican border near Punta Santo Tomas for about 150 km northward to near Crespi Knoll. The SPB fault zone extends northward from off Santa Catalina Island to near Point Dume. The new seismic reflection data reveal a previously unmapped but apparently active fault zone along strike and in the area between the known strands of the SDT and the SPB fault zones. This newly recognized fault links the SDT and SPB faults, forming a continuous, active fault zone that extends about 250 km along the inner Continental Borderland. Although there are no slip rate data available for this fault zone, its overall length, continuity, and active character suggest that a significant portion of the plate motion that occurs offshore is accommodated along the SDT-SPB fault zone, which may pose a more significant seismic hazard than previously recognized.

  17. Active fault systems of the Kivu rift and Virunga volcanic province, and implications for geohazards

    NASA Astrophysics Data System (ADS)

    Zal, H. J.; Ebinger, C. J.; Wood, D. J.; Scholz, C. A.; d'Oreye, N.; Carn, S. A.; Rutagarama, U.

    2013-12-01

    H Zal, C Ebinger, D. Wood, C. Scholz, N. d'Oreye, S. Carn, U. Rutagarama The weakly magmatic Western rift system, East Africa, is marked by fault-bounded basins filled by freshwater lakes that record tectonic and climatic signals. One of the smallest of the African Great Lakes, Lake Kivu, represents a unique geohazard owing to the warm, saline bottom waters that are saturated in methane, as well as two of the most active volcanoes in Africa that effectively dam the northern end of the lake. Yet, the dynamics of the basin system and the role of magmatism were only loosely constrained prior to new field and laboratory studies in Rwanda. In this work, we curated, merged, and analyzed historical and digital data sets, including spectral analyses of merged Shuttle Radar Topography Mission topography and high resolution CHIRP bathymetry calibrated by previously mapped fault locations along the margins and beneath the lake. We quantitatively compare these fault maps with the time-space distribution of earthquakes located using data from a temporary array along the northern sector of Lake Kivu, as well as space-based geodetic data. During 2012, seismicity rates were highest beneath Nyiragongo volcano, where a range of low frequency (1-3 s peak frequency) to tectonic earthquakes were located. Swarms of low-frequency earthquakes correspond to periods of elevated gas emissions, as detected by Ozone Monitoring Instrument (OMI). Earthquake swarms also occur beneath Karisimbi and Nyamuragira volcanoes. A migrating swarm of earthquakes in May 2012 suggests a sill intrusion at the DR Congo-Rwanda border. We delineate two fault sets: SW-NE, and sub-N-S. Excluding the volcano-tectonic earthquakes, most of the earthquakes are located along subsurface projections of steep border faults, and intrabasinal faults calibrated by seismic reflection data. Small magnitude earthquakes also occur beneath the uplifted rift flanks. Time-space variations in seismicity patterns provide a baseline

  18. Ground Motion Simulation for a Large Active Fault System using Empirical Green's Function Method and the Strong Motion Prediction Recipe - a Case Study of the Noubi Fault Zone -

    NASA Astrophysics Data System (ADS)

    Kuriyama, M.; Kumamoto, T.; Fujita, M.

    2005-12-01

    propagation. Moreover, it was clarified that the horizontal velocities by assuming the cascade model was underestimated more than one standard deviation of empirical relation by Si and Midorikawa (1999). The scaling and cascade models showed an approximately 6.4-fold difference for the case, in which the rupture started along the southeastern edge of the Umehara Fault at observation point GIF020. This difference is significantly large in comparison with the effect of different rupture starting points, and shows that it is important to base scenario earthquake assumptions on active fault datasets before establishing the source characterization model. The distribution map of seismic intensity for the 1891 Noubi Earthquake also suggests that the synthetic waveforms in the southeastern Noubi Fault zone may be underestimated. Our results indicate that outer fault parameters (e.g., earthquake moment) related to the construction of scenario earthquakes influence strong motion prediction, rather than inner fault parameters such as the rupture starting point. Based on these methods, we will predict strong motion for approximately 140 to 150 km of the Itoigawa-Shizuoka Tectonic Line.

  19. Levelling profiles and a GPS network to monitor the active folding and faulting deformation in the Campo de Dalias (Betic Cordillera, southeastern Spain).

    PubMed

    Marín-Lechado, Carlos; Galindo-Zaldívar, Jesús; Gil, Antonio José; Borque, María Jesús; de Lacy, María Clara; Pedrera, Antonio; López-Garrido, Angel Carlos; Alfaro, Pedro; García-Tortosa, Francisco; Ramos, Maria Isabel; Rodríguez-Caderot, Gracia; Rodríguez-Fernández, José; Ruiz-Constán, Ana; de Galdeano-Equiza, Carlos Sanz

    2010-01-01

    The Campo de Dalias is an area with relevant seismicity associated to the active tectonic deformations of the southern boundary of the Betic Cordillera. A non-permanent GPS network was installed to monitor, for the first time, the fault- and fold-related activity. In addition, two high precision levelling profiles were measured twice over a one-year period across the Balanegra Fault, one of the most active faults recognized in the area. The absence of significant movement of the main fault surface suggests seismogenic behaviour. The possible recurrence interval may be between 100 and 300 y. The repetitive GPS and high precision levelling monitoring of the fault surface during a long time period may help us to determine future fault behaviour with regard to the existence (or not) of a creep component, the accumulation of elastic deformation before faulting, and implications of the fold-fault relationship. PMID:22319309

  20. Levelling Profiles and a GPS Network to Monitor the Active Folding and Faulting Deformation in the Campo de Dalias (Betic Cordillera, Southeastern Spain)

    PubMed Central

    Marín-Lechado, Carlos; Galindo-Zaldívar, Jesús; Gil, Antonio José; Borque, María Jesús; de Lacy, María Clara; Pedrera, Antonio; López-Garrido, Angel Carlos; Alfaro, Pedro; García-Tortosa, Francisco; Ramos, Maria Isabel; Rodríguez-Caderot, Gracia; Rodríguez-Fernández, José; Ruiz-Constán, Ana; de Galdeano-Equiza, Carlos Sanz

    2010-01-01

    The Campo de Dalias is an area with relevant seismicity associated to the active tectonic deformations of the southern boundary of the Betic Cordillera. A non-permanent GPS network was installed to monitor, for the first time, the fault- and fold-related activity. In addition, two high precision levelling profiles were measured twice over a one-year period across the Balanegra Fault, one of the most active faults recognized in the area. The absence of significant movement of the main fault surface suggests seismogenic behaviour. The possible recurrence interval may be between 100 and 300 y. The repetitive GPS and high precision levelling monitoring of the fault surface during a long time period may help us to determine future fault behaviour with regard to the existence (or not) of a creep component, the accumulation of elastic deformation before faulting, and implications of the fold-fault relationship. PMID:22319309

  1. An developing ICDP drilling project on intraplate seismicity: Drilling Active Faults in Northern Europe (DAFNE)

    NASA Astrophysics Data System (ADS)

    Ask, M. V.; Kukkonen, I. T.; Olesen, O.; Steffen, H.; Schmitt, D.

    2011-12-01

    The combined effects of reduced ice load and glacially affected rock stresses are believed to have generated dramatic postglacial fault (PGF) structures in northern Europe, reflecting a special type of intraplate seismicity. A total of 14 PGFs have been identified up to date, with fault scarps up to 160 km in length and 30 m in height. They are usually SE dipping, SW-NE oriented thrusts that represent reactivated, pre-existing crustal discontinuities. Local and national seismic networks reveal that, at least some of the faults are still very active, with several hundreds of microseismic events each year. It is evident that if they were formed in single events, they would imply massive intraplate earthquakes (up to M 7-8). Hence, PGFs may generate larger intraplate earthquakes than generally assumed. Similar structures in North America have not been reported yet. Currently, an International Continental Drilling Program (ICDP) project on Drilling Active Faults in Northern Europe (DAFNE) is under development. The aim of the project is to investigate tectonic and structural characteristics of PGFs in northern Fennoscandia, including their hydrogeology and associated deep biosphere. The research is anticipated to advance science in neotectonics, hydrogeology and deep biosphere studies, and provide important information for nuclear waste and CO2 disposal, petroleum exploration on the Norwegian continental shelf and studies of mineral resources in PG fault areas. We expect that multidisciplinary research applying shallow and deep drilling of PGFs would provide significant scientific results through generating new data and models, namely: 1. Understanding PGF genesis and controls of their locations; 2. Deep structure and depth extent of PGFs; 3. Textural, mineralogical and physical alteration of rocks in the PGFs; 4. State of stress and estimates of paleostress of PGFs; 5. Hydrogeology, hydrochemistry and hydraulic properties of PGFs; 6. Dating of tectonic reactivation

  2. Influence of fault trend, fault bends, and fault convergence on shallow structure, geomorphology, and hazards, Hosgri strike-slip fault, offshore central California

    NASA Astrophysics Data System (ADS)

    Johnson, S. Y.; Watt, J. T.; Hartwell, S. R.

    2012-12-01

    We mapped a ~94-km-long portion of the right-lateral Hosgri Fault Zone from Point Sal to Piedras Blancas in offshore central California using high-resolution seismic reflection profiles, marine magnetic data, and multibeam bathymetry. The database includes 121 seismic profiles across the fault zone and is perhaps the most comprehensive reported survey of the shallow structure of an active strike-slip fault. These data document the location, length, and near-surface continuity of multiple fault strands, highlight fault-zone heterogeneity, and demonstrate the importance of fault trend, fault bends, and fault convergences in the development of shallow structure and tectonic geomorphology. The Hosgri Fault Zone is continuous through the study area passing through a broad arc in which fault trend changes from about 338° to 328° from south to north. The southern ~40 km of the fault zone in this area is more extensional, resulting in accommodation space that is filled by deltaic sediments of the Santa Maria River. The central ~24 km of the fault zone is characterized by oblique convergence of the Hosgri Fault Zone with the more northwest-trending Los Osos and Shoreline Faults. Convergence between these faults has resulted in the formation of local restraining and releasing fault bends, transpressive uplifts, and transtensional basins of varying size and morphology. We present a hypothesis that links development of a paired fault bend to indenting and bulging of the Hosgri Fault by a strong crustal block translated to the northwest along the Shoreline Fault. Two diverging Hosgri Fault strands bounding a central uplifted block characterize the northern ~30 km of the Hosgri Fault in this area. The eastern Hosgri strand passes through releasing and restraining bends; the releasing bend is the primary control on development of an elongate, asymmetric, "Lazy Z" sedimentary basin. The western strand of the Hosgri Fault Zone passes through a significant restraining bend and

  3. Earthquake cycle associated with active strike slip faults in central Panamá

    NASA Astrophysics Data System (ADS)

    Rick, Bennett; Spinler, Joshua C.; Compton, Kathleen; Rockwell, Thomas K.; Gath, Eldon

    2013-04-01

    The rigidity of the Panamá Isthmus is currently under debate, with important implications for seismic hazards to the Panamá Canal and Panamá City. Whereas Panamá has traditionally been described as a non-deforming microplate caught between a number of larger tectonic plates, new paleoseismic data collected at a limited number of trench sites in association with the ongoing expansion of the Panamá Canal may challenge the validity of the rigid microplate hypothesis. Crustal velocities from a new, ~100 km aperture, 5-station continuous GPS network constructed across the Rio Gatún, Limón, and Pedro Miguel fault zones confirm that these fault zones are active, forming a system of faults that traverse central Panamá in close proximity to the Panamá Canal and Panamá City. However, the slip rates inferred from these new geodetic data are lower than the geologic rates when using an elastic halfspace model. Differences among previous geodetic investigations, which concluded that Panamá is rigid, and the geological slip rate estimates are explained by earthquake cycle effects associated with long recurrence intervals relative to lower crust and upper mantle Maxwell relaxation times. Late in the earthquake cycle the geodetic strain field is broadly distributed, giving the false appearance of low seismic hazards.

  4. Active Tectonics of the Lower Tagus Valley Fault(Portugal) and Implications for Seismic Hazard Assessment

    NASA Astrophysics Data System (ADS)

    Vilanova, S. P.; Meghraoui, M.; Bosi, V.; Fonseca, J. F.

    2001-12-01

    The Lower Tagus Valley (LTV) has been the locus of M6 to M7 onshore historical earthquakes in the vicinity of Lisbon, the best studied being those of 1531 and 1909 (Moreira, 1984). The distribution of damage in these events shows an elongated shape along the river valley, leading several authors to infer the existence of an active fault following the valley (Choffat and Bensaude, 1912; Fonseca, 1989; Cabral, 1995). However, no direct evidence of such structure - other than the occurrence of large earthquakes - was put forward until now. To address this problem we developed a series of geomorphic, geophysical and paleoseismological investigations along the LTV which indicated displacement of drainage system, uplifted alluvial terrace, and the presence of a scarp for a minimum length of 20 km. Upon trenching, we identified NNE-SSW trending thrust planes affecting Pliocene and Holocene formations, and measured a minimum displacement of 3m over the last 4000 years. The age of thrusting was constrained by radiocarbon dating and corroborated by archaeological findings. The most recent faulting event can likely be correlated with the M7 1531 earthquake. The thrust geometry shows a significant left-lateral component, as it is pointed out by the imbricate pattern of fault planes and kinematic indicators (striations), which suggest a N-S direction of maximum compression. A gravitational origin for the deformation exposed in the trenches is discussed and discarded. On a larger scale, fault segments inland may be a continuation of the offshore source of the 1755 Lisbon Earthquake (Vilanova et al., this conference). We present new calculations of seismic hazard for Western Iberia, and discuss the impact of the new seismotectonic data for the Lower Tagus Valley.

  5. Deep reaching versus vertically restricted Quaternary normal faults: Implications on seismic potential assessment in tectonically active regions: Lessons from the middle Aterno valley fault system, central Italy

    NASA Astrophysics Data System (ADS)

    Falcucci, E.; Gori, S.; Moro, M.; Fubelli, G.; Saroli, M.; Chiarabba, C.; Galadini, F.

    2015-05-01

    We investigate the Middle Aterno Valley fault system (MAVF), a poorly investigated seismic gap in the central Apennines, adjacent to the 2009 L'Aquila earthquake epicentral area. Geological and paleoseismological analyses revealed that the MAVF evolved through hanging wall splay nucleation, its main segment moving at 0.23-0.34 mm/year since the Middle Pleistocene; the penultimate activation event occurred between 5388-5310 B.C. and 1934-1744 B.C., the last event after 2036-1768 B.C. and just before 1st-2nd century AD. These data define hard linkage (sensu Walsh and Watterson, 1991; Peacock et al., 2000; Walsh et al., 2003, and references therein) with the contiguous Subequana Valley fault segment, able to rupture in large magnitude earthquakes (up to 6.8), that did not rupture since about two millennia. By the joint analysis of geological observations and seismological data acquired during to the 2009 seismic sequence, we derive a picture of the complex structural framework of the area comprised between the MAVF, the Paganica fault (the 2009 earthquake causative fault) and the Gran Sasso Range. This sector is affected by a dense array of few-km long, closely and regularly spaced Quaternary normal fault strands, that are considered as branches of the MAVF northern segment. Our analysis reveals that these structures are downdip confined by a decollement represented by to the presently inactive thrust sheet above the Gran Sasso front limiting their seismogenic potential. Our study highlights the advantage of combining Quaternary geological field analysis with high resolution seismological data to fully unravel the structural setting of regions where subsequent tectonic phases took place and where structural interference plays a key role in influencing the seismotectonic context; this has also inevitably implications for accurately assessing seismic hazard of such structurally complex regions.

  6. Active normal faulting during the 1997 seismic sequence in Colfiorito, Umbria: Did slip propagate to the surface?

    NASA Astrophysics Data System (ADS)

    Mildon, Zoë K.; Roberts, Gerald P.; Faure Walker, Joanna P.; Wedmore, Luke N. J.; McCaffrey, Ken J. W.

    2016-10-01

    In order to determine whether slip during an earthquake on the 26th September 1997 propagated to the surface, structural data have been collected along a bedrock fault scarp in Umbria, Italy. These collected data are used to investigate the relationship between the throw associated with a debated surface rupture (observed as a pale unweathered stripe at the base of the bedrock fault scarp) and the strike, dip and slip-vector. Previous studies have suggested that the surface rupture was produced either by primary surface slip or secondary compaction of hangingwall sediments. Some authors favour the latter because sparse surface fault dip measurements do not match nodal plane dips at depth. It is demonstrated herein that the strike, dip and height of the surface rupture, represented by a pale unweathered stripe at the base of the bedrock scarp, shows a systematic relationship with respect to the geometry and kinematics of faulting in the bedrock. The strike and dip co-vary and the throw is greatest where the strike is oblique to the slip-vector azimuth where the highest dip values are recorded. This implies that the throw values vary to accommodate spatial variation in the strike and dip of the fault across fault plane corrugations, a feature that is predicted by theory describing conservation of strain along faults, but not by compaction. Furthermore, published earthquake locations and reported fault dips are consistent with the analysed surface scarps when natural variation for surface dips and uncertainty for nodal plane dips at depth are taken into account. This implies that the fresh stripe is indeed a primary coseismic surface rupture whose slip is connected to the seismogenic fault at depth. We discuss how this knowledge of the locations and geometry of the active faults can be used as an input for seismic hazard assessment.

  7. Effects of fluids on faulting within active fault zones - evidence from drill core samples recovered during the San Andreas Fault Observatory at Depth (SAFOD) drilling project

    NASA Astrophysics Data System (ADS)

    Janssen, C.; Wirth, R.; Kienast, M.; Morales, L. G.; Rybacki, E.; Wenk, H.; Dresen, G. H.

    2011-12-01

    Low temperature microstructures observed in samples from SAFOD drill cores indicate fluid-related deformation and chemical reactions occurring simultaneously and interacting with each other. Transmission Electron Microscopy (TEM) observations, document open pores that formed in-situ during or after deformation. In TEM images, many pores with high aspect ratio appear to be unconnected. They were possibly filled with formation water and/or hydrothermal fluids suggesting that elevated pore fluid pressure exist in the fault gouge, preventing pore collapse. The chemical influence of fluids on mineralogical alteration and geomechanical processes in fault rocks is visible in pronounced dissolution-precipitation processes (stylolites, solution seams) as well as in the formation of new phases. Detrital quartz and feldspar grains are partially dissolved and replaced by authigenic illite-smectite (I-S) mixed-layer clay minerals. TEM imaging of these grains reveals that the alteration processes initiated within pores and small intra-grain fissures. In few samples syntectonic fluid-assisted overgrowth of chlorite-rich films on slickensides partly replaced sedimentary quartz grains. Quartz and feldspar grains are partially dissolved with sutured boundaries. Newly-formed phyllosilicates are illite-smectite phases, Mg-rich smectites and chlorite minerals. They are very fine-grained (down to 20 nm) and nucleate at grain surfaces (interfaces), which in many cases are pore or fracture walls. These relatively straight or curved crystals grow into open pore spaces and fractures. They are arranged in a card-house fabric with open pore spaces between the flakes. Locally, clay flakes are bent, folded or show sigmoidal shapes indicating that they were involved in faulting. The clay particles do not show a preferred shape orientation. The predominantly random orientation distribution of the clay minerals was confirmed by x-ray synchrotron texture analysis. Pole figures show very weak

  8. Late Quaternary reef growth history of Les Saintes submarine plateau: a key to constrain active faulting kinematics in Guadeloupe (FWI)

    NASA Astrophysics Data System (ADS)

    Leclerc, F.; Feuillet, N.; Deplus, C.; Cabioch, G.; Tapponnier, P.; LeBrun, J.; Bazin, S.; Beauducel, F.; Boudon, G.; Le Friant, A.; De Min, L.; Melezan, D.

    2012-12-01

    hazard. Joint analysis of the aftershocks sequence and the fault map provide a good image of the fault system recent activity. Finally, we deduced fault kinematics with respect to Holocene reef demise timing, and obtained a mean slip rate of several tenth of mm/yr on each fault, comparable to the slip rate of the near active Morne-Piton fault. Thus, the fault system could generate a Mw 6 earthquake every 250 yrs.

  9. Active faults in the deformation zone off Noto Peninsula, Japan, revealed by high- resolution seismic profiles

    NASA Astrophysics Data System (ADS)

    Inoue, T.; Okamura, Y.; Murakami, F.; Kimura, H.; Ikehara, K.

    2008-12-01

    Recently, a lot of earthquakes occur in Japan. The deformation zone which many faults and folds have concentrated exists on the Japan Sea side of Japan. The 2007 Noto Hanto Earthquake (MJMA 6.9) and 2007 Chuetsu-oki Earthquake (MJMA 6.8) were caused by activity of parts of faults in this deformation zone. The Noto Hanto Earthquake occurred on 25 March, 2007 under the northwestern coast of Noto Peninsula, Ishikawa Prefecture, Japan. This earthquake is located in Quaternary deformation zone that is continued from northern margin of Noto Peninsula to southeast direction (Okamura, 2007a). National Institute of Advanced Industrial Science and Technology (AIST) carried out high-resolution seismic survey using Boomer and 12 channels short streamer cable in the northern part off Noto Peninsula, in order to clarify distribution and activities of active faults in the deformation zone. A twelve channels short streamer cable with 2.5 meter channel spacing developed by AIST and private corporation is designed to get high resolution seismic profiles in shallow sea area. The multi-channel system is possible to equip on a small fishing boat, because the data acquisition system is based on PC and the length of the cable is short and easy to handle. Moreover, because the channel spacing is short, this cable is very effective for a high- resolution seismic profiling survey in the shallow sea, and seismic data obtained by multi-channel cable can be improved by velocity analysis and CDP stack. In the northern part off Noto Peninsula, seismic profiles depicting geologic structure up to 100 meters deep under sea floor were obtained. The most remarkable reflection surface recognized in the seismic profiles is erosion surface at the Last Glacial Maximum (LGM). In the western part, sediments about 30 meters (40 msec) thick cover the erosional surface that is distributed under the shelf shallower than 100m in depth and the sediments thin toward offshore and east. Flexures like deformation in

  10. Impact of the Yakutat indentor corner on present-day tectonics and fault activity in SE Alaska - SW Yukon

    NASA Astrophysics Data System (ADS)

    Mazzotti, S.; Marechal, A.; Ritz, J. F.; Ferry, M. A.

    2015-12-01

    We present an active tectonic model of the SE Alaska - SW Yukon region based principally on the integration of recent GPS velocity data and new fault-slip rates derived from geomorphology. In this region, the Yakutat collision results in complex tectonics with patterns of strain localization and strain partitioning that strongly vary across the various mountain ranges and active faults. We propose that deformation and fault activity in the St. Elias and Chugach Mountains are primarily controlled by the eastern syntaxis of the Yakutat collision, which produces a semi-radial tectonic pattern: Velocities, principal horizontal shortening rates, and maximum horizontal stress orientations rotate by 60 - 80 ° around the syntaxis, from roughly parallel to the relative Pacific - North America motion at the front of the collision to roughly orthogonal southeast of the syntaxis. The interaction between this strain pattern and major inherited tectonic structures inland of the collision zone (i.e., Denali and Duke River Faults) results in various reactivation modes of these structures. Specifically, the Denali Fault shows a very pronounced lateral variations of activity from ~12 mm/a of dextral slip rate in its central section to ~1 mm/a of mostly shortening slip rate along its southern section. This marked change of activity is associated with a possible relay system where the Duke River and Totschunda Faults accommodate a major part (8 - 12 mm/a) of the inland strain transfer directly in front of the syntaxis. This new tectonic model retains some questions, in particular regarding the mechanisms of deformation and strain transfer (1) from the syntaxis to the Duke River - Totschunda system and (2) at the junction between Totschunda and Denali Faults. Numerical models of present-day deformation may help address these issues and provide information about relative strength of the various crustal and inherited fault elements of this system.

  11. How Faults Shape the Earth.

    ERIC Educational Resources Information Center

    Bykerk-Kauffman, Ann

    1992-01-01

    Presents fault activity with an emphasis on earthquakes and changes in continent shapes. Identifies three types of fault movement: normal, reverse, and strike faults. Discusses the seismic gap theory, plate tectonics, and the principle of superposition. Vignettes portray fault movement, and the locations of the San Andreas fault and epicenters of…

  12. A new insight into the nature of seasonal variations in coordinate time series of GPS sites located near active faults

    NASA Astrophysics Data System (ADS)

    Trofimenko, Sergey V.; Bykov, Victor G.; Shestakov, Nikolay V.; Grib, Nikolay N.; Takahashi, Hiroaki

    2016-09-01

    This study provides new insights into the nature of seasonal variations in coordinate time series of GPS sites located near active faults and methods of their modeling. Monthly averaged coordinate time series were analyzed for several pairs of collocated GPS sites situated near the active fault intersection area, in close proximity to the central part of the northern boundary of the Amurian plate and the vicinity of the San Andreas Fault zone. It is concluded that the observed seasonal variations are best described by a breather function which is one of the solutions of the well-known sine-Gordon equation. The obtained results suggest that, in this case, the source of seasonal variations may be caused by the appearance of solitary strain waves in the fault intersection system, which may be qualitatively treated as standing waves of compression-extension of the geological medium. Based on statistical testing, the limits of applicability of the suggested model have been established.

  13. Searching for Active Faults in the Western Eurasia-Nubia plate boundary

    NASA Astrophysics Data System (ADS)

    Antunes, Veronica; Custodio, Susana; Arroucau, Pierre; Carrilho, Fernando

    2016-04-01

    The repeated occurrence of large magnitude earthquakes in southwest Iberia in historical and instrumental times suggests the presence of active faults in the region. However, the region undergoes slow deformation, which results in low rates of seismic activity, and the location, dimension and geometry of active structures remains unsettled. We recently developed a new algorithm for earthquake location in 3D complex media with laterally varying interface depths, which allowed us to relocate 2363 events that occurred from 2007 to 2013. The method takes as inputs P- and S-wave catalog arrival times obtained from the Portuguese Meteorological Institute (IPMA, Instituto Portugues do Mar e da Atmosfera), for a study area defined by 8.5°W < lon < 5°W and 36° < lat < 37.5°. After relocation, we obtain a lineation of events in the Guadalquivir bank region, in the northern Gulf of Cadiz. The lineation defines a low-angle northward-dipping plane rooted at the base of the crust, which could indicate the presence of a major fault. We provide seismological evidence for the existence of this seemingly active structure based on earthquake relocations, focal mechanisms and waveform similarity between neighboring events.

  14. Fault activation after vigorous eruption: the December 8, 2015 seismic swarm at Mt. Etna

    NASA Astrophysics Data System (ADS)

    Alparone, Salvatore; Bonforte, Alessandro; Guglielmino, Francesco; Maiolino, Vincenza; Puglisi, Giuseppe; Ursino, Andrea

    2016-04-01

    From December 2, 2015, volcanic activity suddenly occurred on Mt. Etna with very violent fire fountaining at central crater, known also as "Voragine". This activity continued with other intense episodes at the same crater during the three following days and involving also, in turn, all the other three summit craters. This sudden eruption produced a rapid deflation of the volcano and was followed, from December 8, by a seismic swarm, with almost eighty earthquakes during this day, located on the uppermost segment of the Pernicana-Provenzana fault system (PFS). This seismicity was characterized by shallow foci (from few hundred meters until 1.5 km below the sea level) and mainshock with 3.6 magnitude. In order to investigate and measure the dynamics controlling and accompanying the PFS activation, a dataset composed of C-Band Sentinel-1A data has been used for SAR Interferometry (InSAR) analysis. Some interferograms have been generated from ascending and descending orbits in order to analyze both short- and long-term deformation. The availability of GPS data allowed comparing and integrating them with InSAR for ground truth and modeling aims. The surface kinematics and modeling obtained by DInSAR and GPS data and integration have been compared to the distribution of the seismicity and related focal mechanisms in order to define the fault geometry and motion. Moreover, essential constraints have been achieved about the PFS dynamic and its relationship with the intense volcanic activity occurred.

  15. Catalysis and activation of magic states in fault-tolerant architectures

    SciTech Connect

    Campbell, Earl T.

    2011-03-15

    In many architectures for fault-tolerant quantum computing universality is achieved by a combination of Clifford group unitary operators and preparation of suitable nonstabilizer states, the so-called magic states. Universality is possible even for some fairly noisy nonstabilizer states, as distillation can convert many noisy copies into fewer purer magic states. Here we propose protocols that exploit multiple species of magic states in surprising ways. These protocols provide examples of previously unobserved phenomena that are analogous to catalysis and activation well known in entanglement theory.

  16. Active tendon control of reinforced concrete frame structures subjected to near-fault effects

    NASA Astrophysics Data System (ADS)

    Nigdeli, Sinan Melih; Boduroǧlu, M. Hasan

    2013-10-01

    A reinforced concrete (RC) frame structure was controlled with active tendons under the excitation of near-fault ground motions. Proportional Integral Derivative (PID) type controllers were used and the controller was tuned by using a numerical algorithm. In order to prevent brittle fracture of the structure, the aim of the control is to reduce maximum base shear force. The RC structure was investigated for different characteristic strengths of concrete and the approach is applicable for the structure with 14 MPa concrete strength or higher.

  17. High-resolution shallow reflection seismic image and surface evidence of the Upper Tiber Basin active faults (Northern Apennines, Italy)

    USGS Publications Warehouse

    Donne, D.D.; Plccardi, L.; Odum, J.K.; Stephenson, W.J.; Williams, R.A.

    2007-01-01

    Shallow seismic reflection prospecting has been carried out in order to investigate the faults that bound to the southwest and northeast the Quaternary Upper Tiber Basin (Northern Apennines, Italy). On the northeastern margin of the basin a ??? 1 km long reflection seismic profile images a fault segment and the associated up to 100 meters thick sediment wedge. Across the southwestern margin a 0.5 km-long seismic profile images a 50-55??-dipping extensional fault, that projects to the scarp at the base of the range-front, and against which a 100 m thick syn-tectonic sediment wedge has formed. The integration of surface and sub-surface data allows to estimate at least 190 meters of vertical displacement along the fault and a slip rate around 0.25 m/kyr. Southwestern fault might also be interpreted as the main splay structure of regional Alto Tiberina extensional fault. At last, the 1917 Monterchi earthquake (Imax=X, Boschi et alii, 2000) is correlable with an activation of the southwestern fault, and thus suggesting the seismogenic character of this latter.

  18. Observations of Seafloor Deformation and Methane Venting within an Active Fault Zone Offshore Southern California

    NASA Astrophysics Data System (ADS)

    Anderson, K.; Lundsten, E. M.; Paull, C. K.; Caress, D. W.; Thomas, H. J.; Brewer, P. G.; Vrijenhoek, R.; Lundsten, L.

    2013-12-01

    Detailed mapping surveys of the floor and flanks of the Santa Monica Basin, San Pedro Basin, and San Diego Trough were conducted during the past seven years using an Autonomous Underwater Vehicle (AUV) built and operated by MBARI specifically for seafloor mapping. The AUV collected data provide up to 1 m resolution multibeam bathymetric grids with a vertical precision of 0.15 m. Along with high-resolution multibeam, the AUV also collects chirp seismic reflection profiles. Structures within the uppermost 10-20 m of the seafloor, which in the surveys presented here is composed of recent sediment drape, can typically be resolved in the sub-bottom reflectors. Remotely operated vehicle (ROV) dives allowed for ground-truth observations and sampling within the surveyed areas. The objectives of these dives included finding evidence of recent seafloor deformation and locating areas where chemosynthetic biological communities are supported by fluid venting. Distinctive seafloor features within an active fault zone are revealed in unprecedented detail in the AUV generated maps and seismic reflection profiles. Evidence for recent fault displacements include linear scarps which can be as small as 20 cm high but traceable for several km, right lateral offsets within submarine channels and topographic ridges, and abrupt discontinuities in sub-bottom reflectors, which in places appear to displace seafloor sediments. Several topographic highs that occur within the fault zone appear to be anticlines related to step-overs in these faults. These topographic highs are, in places, topped with circular mounds that are up to 15 m high and have ~30° sloping sides. The crests of the topographic highs and the mounds both have distinctive rough morphologies produced by broken pavements of irregular blocks of methane-derived authigenic carbonates, and by topographic depressions, commonly more than 2 m deep. These areas of distinctive rough topography are commonly associated with living

  19. Geomorphic analysis of the Sierra Cabrera, an active pop-up in the constrictional domain of conjugate strike-slip faults: The Palomares and Polopos fault zones (eastern Betics, SE Spain)

    NASA Astrophysics Data System (ADS)

    Giaconia, Flavio; Booth-Rea, G.; Martínez-Martínez, J. M.; Azañón, J. M.; Pérez-Peña, J. V.

    2012-12-01

    The NNE-SSW sinistral Palomares and the conjugate dextral WNW-ESE striking Polopos fault zones terminate in the Sierra Cabrera antiform. In order to test the Quaternary activity and topographic relief control in the termination of these fault zones, here we present new qualitative and quantitative geomorphic analyses supported by a new structural map of the region. The main mountain fronts of the Cabrera antiform are formed by the North and South Cabrera reverse faults that merge laterally into the Palomares and Polopos faults, respectively. These faults produce knickpoints, stream deflections, complex basin hypsometric curves, high SLk anomalies and highly eroded basins in their proximity. Furthermore, the drainage network shows an S-shaped pattern reflecting progressive anticlockwise rotation related to the sinistral Palomares fault zone. The estimated uplift rates determined by the integration between mountain front sinuosity index and valley floor width to height ratio are larger than those obtained for strike-slip faults in the eastern Betics. These larger uplift rates with our geomorphic and structural dataset indicate that the topographic relief of the Sierra Cabrera antiform is controlled by reverse faults that form a pop-up structure in the constrictional domain between the larger Palomares-Polopos conjugate strike-slip faults. Existing GPS geodetic data suggest that the North and South Cabrera reverse faults probably accommodate a large part of Africa-Iberia convergence in the region.

  20. Widespread active detachment faulting and core complex formation near 13 degrees N on the Mid-Atlantic Ridge.

    PubMed

    Smith, Deborah K; Cann, Johnson R; Escartín, Javier

    2006-07-27

    Oceanic core complexes are massifs in which lower-crustal and upper-mantle rocks are exposed at the sea floor. They form at mid-ocean ridges through slip on detachment faults rooted below the spreading axis. To date, most studies of core complexes have been based on isolated inactive massifs that have spread away from ridge axes. Here we present a survey of the Mid-Atlantic Ridge near 13 degrees N containing a segment in which a number of linked detachment faults extend for 75 km along one flank of the spreading axis. The detachment faults are apparently all currently active and at various stages of development. A field of extinct core complexes extends away from the axis for at least 100 km. Our observations reveal the topographic characteristics of actively forming core complexes and their evolution from initiation within the axial valley floor to maturity and eventual inactivity. Within the surrounding region there is a strong correlation between detachment fault morphology at the ridge axis and high rates of hydroacoustically recorded earthquake seismicity. Preliminary examination of seismicity and seafloor morphology farther north along the Mid-Atlantic Ridge suggests that active detachment faulting is occurring in many segments and that detachment faulting is more important in the generation of ocean crust at this slow-spreading ridge than previously suspected. PMID:16871215

  1. Active faulting at Delphi, Greece: Seismotectonic remarks and a hypothesis for the geologic environment of a myth

    NASA Astrophysics Data System (ADS)

    Piccardi, Luigi

    2000-07-01

    Historical data are fundamental to the understanding of the seismic history of an area. At the same time, knowledge of the active tectonic processes allows us to understand how earthquakes have been perceived by past cultures. Delphi is one of the principal archaeological sites of Greece, the main oracle of Apollo. It was by far the most venerated oracle of the Greek ancient world. According to tradition, the mantic proprieties of the oracle were obtained from an open chasm in the earth. Delphi is directly above one of the main antithetic active faults of the Gulf of Corinth Rift, which bounds Mount Parnassus to the south. The geometry of the fault and slip-parallel lineations on the main fault plane indicate normal movement, with minor right-lateral slip component. Combining tectonic data, archaeological evidence, historical sources, and a reexamination of myths, it appears that the Helice earthquake of 373 B.C. ruptured not only the master fault of the Gulf of Corinth Rift at Helice, but also the antithetic fault at Delphi, similarly to the Corinth earthquake of 1981. Moreover, the presence of an active fault directly below the temples of the oldest sanctuary suggests that the mythological oracular chasm might well have been an ancient tectonic surface rupture.

  2. Widespread active detachment faulting and core complex formation near 13 degrees N on the Mid-Atlantic Ridge.

    PubMed

    Smith, Deborah K; Cann, Johnson R; Escartín, Javier

    2006-07-27

    Oceanic core complexes are massifs in which lower-crustal and upper-mantle rocks are exposed at the sea floor. They form at mid-ocean ridges through slip on detachment faults rooted below the spreading axis. To date, most studies of core complexes have been based on isolated inactive massifs that have spread away from ridge axes. Here we present a survey of the Mid-Atlantic Ridge near 13 degrees N containing a segment in which a number of linked detachment faults extend for 75 km along one flank of the spreading axis. The detachment faults are apparently all currently active and at various stages of development. A field of extinct core complexes extends away from the axis for at least 100 km. Our observations reveal the topographic characteristics of actively forming core complexes and their evolution from initiation within the axial valley floor to maturity and eventual inactivity. Within the surrounding region there is a strong correlation between detachment fault morphology at the ridge axis and high rates of hydroacoustically recorded earthquake seismicity. Preliminary examination of seismicity and seafloor morphology farther north along the Mid-Atlantic Ridge suggests that active detachment faulting is occurring in many segments and that detachment faulting is more important in the generation of ocean crust at this slow-spreading ridge than previously suspected.

  3. Somma-Vesuvius' activity: a mineral chemistry database

    NASA Astrophysics Data System (ADS)

    Redi, Daniele; Cannatelli, Claudia; Esposito, Rosario; Lima, Annamaria; Petrosino, Paola; De Vivo, Benedetto

    2016-08-01

    Clinopyroxene and olivine are ubiquitous phases in Somma-Vesuvius (SV) volcanics and for the first time they were systematically studied in several products younger than 40 ka. In this manuscript chemical compositions (major, trace and rare earth elements) of a large set of olivine and clinopyroxene crystals from selected rock samples are presented and discussed. Fourteen pumice samples from Plinian pyroclastic deposits as well as three scoriae and eight lava samples from inter-Plinian deposits were collected. A representative number of olivine and clinopyroxene crystals (n ~ 50) were selected for each sample and analysed by electron microprobe and laser ablation inductively coupled plasma mass spectrometer, resulting in a large database, which is now available to the scientific community. All studied eruptive products contain olivine and clinopyroxene crystals spanning a wide range of compositions. Olivines show Fo content varying from 91 to 68, while clinopyroxenes display Mg# ranging from 93 to 71. In samples younger than A.D. 79, the more evolved (Mg#82-72) clinopyroxene crystals show clear Ca enrichment (~23.5-24.5 wt% CaO) with respect to those from older samples (before-A.D.79, ~23-21 wt% CaO). The results corroborate disequilibrium between olivine, clinopyroxene and the hosting melt, and an increasing role of carbonate assimilation in SV magma evolution in the last 2 ka. The database here produced is thought as a share product that makes available mineral data and can be used for further studies by researchers to investigate geochemical evolution of the SV system.

  4. A study to constrain the geometry of an active fault in southern Italy through borehole breakouts and downhole logs

    NASA Astrophysics Data System (ADS)

    Pierdominici, Simona; Mariucci, Maria Teresa; Montone, Paola

    2011-10-01

    Identification of an active fault and the local versus regional present-day stress field in the Irpinia region (southern Apennines) have been performed along a 5900 m deep well (San Gregorio Magno 1) by a detailed breakout and geophysical log analysis. The selected area is characterized by diffuse low magnitude seismicity, although in historical times moderate to large earthquakes have repeatedly struck it. On 23rd November 1980 a strong earthquake ( M = 6.9) nucleated on a 38-km long normal fault, named Irpinia fault, producing the first unequivocal historical surface faulting ever documented in Italy. The analysis of stress-induced wellbore breakouts shows a direction of minimum horizontal stress N18°±24°, fairly consistent with the regional stress trend (N44°±20°). The small discrepancy between our result and the regional stress orientation might be related to the influence of local stress sources such as variations of the Irpinia fault plane orientation and the presence of differently oriented active shear zones. This paper shows for the first time a detailed analysis on the present-day stress along a well to identify the Irpinia fault at depth and constrain its geometry.

  5. GeoBioScience: Red Wood Ants as Bioindicators for Active Tectonic Fault Systems in the West Eifel (Germany).

    PubMed

    Berberich, Gabriele; Schreiber, Ulrich

    2013-01-01

    In a 1.140 km² study area of the volcanic West Eifel, a comprehensive investigation established the correlation between red wood ant mound (RWA; Formica rufa-group) sites and active tectonic faults. The current stress field with a NW-SE-trending main stress direction opens pathways for geogenic gases and potential magmas following the same orientation. At the same time, Variscan and Mesozoic fault zones are reactivated. The results showed linear alignments and clusters of approx. 3,000 RWA mounds. While linear mound distribution correlate with strike-slip fault systems documented by quartz and ore veins and fault planes with slickensides, the clusters represent crosscut zones of dominant fault systems. Latter can be correlated with voids caused by crustal block rotation. Gas analyses from soil air, mineral springs and mofettes (CO₂, Helium, Radon and H₂S) reveal limiting concentrations for the spatial distribution of mounds and colonization. Striking is further the almost complete absence of RWA mounds in the core area of the Quaternary volcanic field. A possible cause can be found in occasionally occurring H₂S in the fault systems, which is toxic at miniscule concentrations to the ants. Viewed overall, there is a strong relationship between RWA mounds and active tectonics in the West Eifel.

  6. Mineral Reactions in Active Fault Strands of the SAFOD Borehole: Results from Mineralogical and U/Th Studies

    NASA Astrophysics Data System (ADS)

    Schleicher, A. M.; Ali, S.; Stute, M.; Torgersen, T.; van der Pluijm, B. A.; Warr, L. N.

    2009-12-01

    Mix-layered clay minerals are common in fault rocks, and their mineralization is strongly influenced by the surrounding environment. Based on detailed mineralogical and geochemical study of mudrock samples from the San Andreas Fault Observatory at Depth (SAFOD), phase 3, we present new TEM-XRD and U/Th results from bore hole depths of 3186.7 m to 3198.9 m, and 3294.9 m to 3313.5 m measured depth. These areas contain two actively creeping sections of the fault zone: Fault strand 10480 (~3194 m) and Fault strand 10830 (~3301 m). XRD analysis of the clay minerals in both fault strands show illite and illite-smectite (I-S) and chlorite dominating from 3186.7 m to 3196.3 m, and 3294.9 m to 3297 m measured depth. Samples containing increased chlorite-smectite (C-S) and corrensite (50:50 C-S) are mostly restricted to a well-defined interval in the center of the two fault strands between 3196.3 m to 3198.1 m, and 3297.5 to ~3305 m. Relatively high U/Th values in both creeping sections of the fault zone indicate that the presence of corrensite and chlorite is associated with reducing conditions during mineral formation, compared to more oxygenated adjacent rocks along the drill cores. TEM also shows serpentine minerals (chrysotile) especially in the fault centers at 3196.8 m and at 3297.5 m depth. These initially tubular phases are slightly flattened and oval in section with distinct strain features that reflect pre-faulting crystallization and subsequent ductile deformation within the fault zone. The C-S phases surrounding the chyrostile show no distinct deformation or subsequent alteration features. Chemical analyses show chlorite and C-S with a high Mg content, which indicates that their crystallization may have involved the destabilization of serpentine, providing Fe and Mg, whereas leaching of mica, feldspar and quartz from the wall-rock, is the probable source of Si and Al. This temporal sequence of reaction weakening suggests distinct changes in the fluid chemistry

  7. Active faulting in the frontal Rif Cordillera (Fes region, Morocco): Constraints from GPS data

    NASA Astrophysics Data System (ADS)

    Chalouan, Ahmed; Gil, Antonio J.; Galindo-Zaldívar, Jesús; Ahmamou, M.'Fedal; Ruano, Patricia; de Lacy, Maria Clara; Ruiz-Armenteros, Antonio Miguel; Benmakhlouf, Mohamed; Riguzzi, Federica

    2014-07-01

    The southern Rif cordillera front, between Fes and Meknes, is formed by the Prerif Ridges, which constitute a thrust and fold belt, in contact with the Saïss foreland basin. Geological evidence and regional GPS network data support recent and active tectonics of this Alpine cordillera, with a top-to-the-S-SW motion with respect to stable Africa. A local non-permanent GPS network was installed in 2007 around Fes to constrain the present-day activity of the mountain front. Six GPS sites are located in the Prerif mountain front (jbel Thratt and jbel Zalarh), the Saïss basin and the foreland constituted by the tabular Middle Atlas. Measurements of the GPS network in 2007, 2009 and 2012, over a five year span, seem to indicate that this region is tectonically active and is subjected to significant horizontal motions: (i) a regional displacement toward the SW with respect to stable Africa, showing an average rate of 2 mm/yr; (ii) a southwestward convergent motion between the jbel Thratt with respect to the Saïss basin and the eastern Zalarh ridge, with an average rate of about 4 mm/yr; and (iii) moderate NNE-SSW divergent dextral motion between the Saïss basin and the northern front of the tabular Middle Atlas with an average rate of about 1-2 mm/yr. The regional southwestward motion is related to the activity of the NE-SW sinistral North Middle Atlas-Kert fault zone, which follows the Moroccan Hot Line. Convergence between the Prerif ridges, located at the southern edge of the Rif, and the Saïss basin is accommodated by ENE-WSW striking northward dipping reverse sinistral faults and south vergent folds. In addition, increasing deformation toward the western ridges is in agreement with the stepped mountain front and the development of the arched structures of the Prerif ridges. Normal faults located south of the Saïss basin are responsible for local extension. Whereas the most active deformation occurs in the southern front of the jbel Thratt near Fes, the Sa

  8. Intelligent fault management for the Space Station active thermal control system

    NASA Technical Reports Server (NTRS)

    Hill, Tim; Faltisco, Robert M.

    1992-01-01

    The Thermal Advanced Automation Project (TAAP) approach and architecture is described for automating the Space Station Freedom (SSF) Active Thermal Control System (ATCS). The baseline functionally and advanced automation techniques for Fault Detection, Isolation, and Recovery (FDIR) will be compared and contrasted. Advanced automation techniques such as rule-based systems and model-based reasoning should be utilized to efficiently control, monitor, and diagnose this extremely complex physical system. TAAP is developing advanced FDIR software for use on the SSF thermal control system. The goal of TAAP is to join Knowledge-Based System (KBS) technology, using a combination of rules and model-based reasoning, with conventional monitoring and control software in order to maximize autonomy of the ATCS. TAAP's predecessor was NASA's Thermal Expert System (TEXSYS) project which was the first large real-time expert system to use both extensive rules and model-based reasoning to control and perform FDIR on a large, complex physical system. TEXSYS showed that a method is needed for safely and inexpensively testing all possible faults of the ATCS, particularly those potentially damaging to the hardware, in order to develop a fully capable FDIR system. TAAP therefore includes the development of a high-fidelity simulation of the thermal control system. The simulation provides realistic, dynamic ATCS behavior and fault insertion capability for software testing without hardware related risks or expense. In addition, thermal engineers will gain greater confidence in the KBS FDIR software than was possible prior to this kind of simulation testing. The TAAP KBS will initially be a ground-based extension of the baseline ATCS monitoring and control software and could be migrated on-board as additional computation resources are made available.

  9. Geomorphic analysis of the Sierra Cabrera, an active pop-up in the constriction domain of conjugate strike-slip faults: the Palomares and Polopos fault zones (eastern Betics, SE Spain)

    NASA Astrophysics Data System (ADS)

    Giaconia, F.; Booth-Rea, G.; Martínez-Martínez, J. M.; Pérez-Peña, V.; Azañón, J. M.

    2012-04-01

    Segments of the Quaternary sinistral Carboneras and Palomares fault zones, striking NE-SW and NNE-SSW, respectively, terminate in the Sierra Cabrera antiform together with the conjugate dextral WNW-ESE striking Polopos fault zone. In the constriction domain between these fault zones a pop-up structure occurs formed by the North and the South Cabrera reverse faults that bound the northern and the southern hillslopes, respectively. In order to test the Quaternary activity and relief control of these fault zones, here we present new qualitative and quantitative geomorphic analyses for the Sierra Cabrera using the following indices: mountain-front sinuosity, valley floor width-to-height ratio, drainage basin asymmetry factor, basin hypsometric curve and integral, and the SLk index. These analyses were performed with the aid of several maps such as the SLk and the minimum bulk erosion map. Qualitative observations carried out on the drainage network highlight the existence of a Late Miocene fold-related drainage network and a following late Miocene to Plio-Quaternary fault-related one. Integrating the mountain-front sinuosity and the valley floor width-to-height ratio for each mountain front we estimated the uplift rates associated to each of them. Fault-related mountain-fronts with a N50-60°E strike have reverse kinematics and uplift rates larger than 0.5 m ky-1 (e.g. North and South Cabrera reverse faults), whereas those with N20-30°E and N90-100°E strikes show oblique strike-slip kinematics and show lower uplift rates, between 0.05 and 0.5 m ky-1 (e.g. the Palomares and the Polopos fault segments). Furthermore, these faults produce knickpoints, complex basin hypsometric curves, high SLk anomalies and highly eroded basins above the fault traces. The estimated uplift rates are larger than those obtained from other authors for strike-slip faults in the eastern Betics that range between 0.1 and 0.05 m ky-1 (e.g. Palomares and southern Carboneras strike-slip fault

  10. Comparison between different methodologies for detecting radon in soil along an active fault: the case of the Pernicana fault system, Mt. Etna (Italy).

    PubMed

    Giammanco, S; Immè, G; Mangano, G; Morelli, D; Neri, M

    2009-01-01

    Three different methodologies were used to measure Radon ((222)Rn) in soil, based on both passive and active detection system. The first technique consisted of solid-state nuclear track detectors (SSNTD), CR-39 type, and allowed integrated measurements. The second one consisted of a portable device for short time measurements. The last consisted of a continuous measurement device for extended monitoring, placed in selected sites. Soil (222)Rn activity was measured together with soil Thoron ((220)Rn) and soil carbon dioxide (CO(2)) efflux, and it was compared with the content of radionuclides in the rocks. Two different soil-gas horizontal transects were investigated across the Pernicana fault system (NE flank of Mount Etna), from November 2006 to April 2007. The results obtained with the three methodologies are in a general agreement with each other and reflect the tectonic settings of the investigated study area. The lowest (222)Rn values were recorded just on the fault plane, and relatively higher values were recorded a few tens of meters from the fault axis on both of its sides. This pattern could be explained as a dilution effect resulting from high rates of soil CO(2) efflux. Time variations of (222)Rn activity were mostly linked to atmospheric influences, whereas no significant correlation with the volcanic activity was observed. In order to further investigate regional radon distributions, spot measurements were made to identify sites having high Rn emissions that could subsequently be monitored for temporal radon variations. SSNTD measurements allow for extended-duration monitoring of a relatively large number of sites, although with some loss of temporal resolution due to their long integration time. Continuous monitoring probes are optimal for detailed time monitoring, but because of their expense, they can best be used to complement the information acquired with SSNTD in a network of monitored sites.

  11. Coseismic uplift and fault model of marine active faults in 1729 AD revealed by fossilized intertidal sessile organisms along the northern coast of the Noto Peninsula, central Japan

    NASA Astrophysics Data System (ADS)

    Hamada, M.; Hiramatsu, Y.; Oda, M.; Yamaguchi, H.

    2015-12-01

    The Noto Peninsula is located in the backarc region of southwest Japan and is characterized by geomorphologic features formed by active tectonics and glacial eustasy through the Quaternary. Pleistocene marine terraces along the northern coast of the Noto Peninsula indicate uplift in the coastal area through the late Quaternary (Ota and Hirakawa, 1979). Recently, an active fault zone on the seafloor off the coast was found and was divided into four segments, Monzen-oki, Saruyama-oki, Wajima-oki, and Suzu-oki, from west to east (Inoue and Okamura, 2010). We investigated vertical displacement along the coast using intertidal sessile organisms at nine sites on the rocky coast. We measured the height of fossilized Pomatoleios kraussii by GPS surveying together with a sea-level change curve, and dated them using the AMS 14C method. The vertical displacements and dates at the sites implied that coastal uplift occurred along 20 km of coastline, corresponding to the Wajima-oki segment zone, and most likely between 1600 and 1800 AD. This is coincident with seismic damage in this area in 1729 AD recorded in historical documents. We constructed a fault model with three rectangular faults in a homogeneous elastic half-space and estimated the optimal net slip and rake by a non-linear inversion method (Matsu'ura and Hasegawa, 1987). The best fit to the estimated vertical displacements is provided by a net slip of 1.8 m with a rake of 90° for the western fault plane and a net slip of 0.6 m with a rake of 90° for the center and the eastern fault planes. The moment magnitude (Mw) calculated from these parameters with a rigidity of 30 GPa is 6.6. We compared the elevation distribution of the former shorelines based on coastal terraces and the 1729 earthquake uplifts. Assuming that the coastal uplift is caused by the cumulative crustal deformation produced by the same size event as the 1729 earthquake, the average recurrence interval of the events is estimated to be 1700 years.

  12. Evaluation of faults and their effect on ground-water flow southwest of Frenchman Flat, Nye and Clark counties, Nevada: a digital database

    USGS Publications Warehouse

    McKee, Edwin H.; Wickham, Thomas A.; Wheeler, Karen L.

    1998-01-01

    Ground-water flow through the region south and west of Frenchman Flat, in the Ash Meadows subbasin of the Death Valley ground-water flow system, is controlled mostly by faults which arrange the distribution of permeable and impermeable rocks. In addition, most permeability is along fractures caused by faulting in carbonate rocks. Large faults are more likely to reach the potentiometric surface as deep as 325 meters below the ground surface and are more likely to effect the flow path than small faults. This study concentrated on identifying large faults, especially where they cut carbonate rocks. Small faults, however, may develop as much permeability as large faults if they are penetrative and are part of an anastomosing fault_zone. The overall pattern of faults and joints at the ground surface in the Spotted and Specter Ranges is an indication of the fracture system at the depth of the water table. Most of the faults in these ranges are west-southwest-striking, high-angle faults, 100 to 3,500 meters long, with 10 to 300 meters of displacement. Many of them, such as those in the Spotted Range and Rock Valley are left-lateral strike-slip faults that are conjugate to the NW-striking right-lateral faults of the Las Vegas Valley shear zone. These faults control the ground-water flow path, which runs west-southwest beneath the Spotted Range, Mercury Valley and the Specter Range. The Specter Range thrust is a significant geologic structure with respect to ground- water flow. This regional thrust fault emplaces siliceous clastic strata into the north central and western parts of the Specter Range. These rocks act as a barrier that confines ground- water flow to the southern part of the range, directing it southwestward toward springs at Ash Meadows. These siliceous clastic aquitard rocks and overlying Cenozoic deposits probably also block westward flow of ground-water in Rock Valley, diverting it southward to the flow path beneath the southern part of the Specter Range.

  13. KNApSAcK Metabolite Activity Database for retrieving the relationships between metabolites and biological activities.

    PubMed

    Nakamura, Yukiko; Afendi, Farit Mochamad; Parvin, Aziza Kawsar; Ono, Naoaki; Tanaka, Ken; Hirai Morita, Aki; Sato, Tetsuo; Sugiura, Tadao; Altaf-Ul-Amin, Md; Kanaya, Shigehiko

    2014-01-01

    Databases (DBs) are required by various omics fields because the volume of molecular biology data is increasing rapidly. In this study, we provide instructions for users and describe the current status of our metabolite activity DB. To facilitate a comprehensive understanding of the interactions between the metabolites of organisms and the chemical-level contribution of metabolites to human health, we constructed a metabolite activity DB known as the KNApSAcK Metabolite Activity DB. It comprises 9,584 triplet relationships (metabolite-biological activity-target species), including 2,356 metabolites, 140 activity categories, 2,963 specific descriptions of biological activities and 778 target species. Approximately 46% of the activities described in the DB are related to chemical ecology, most of which are attributed to antimicrobial agents and plant growth regulators. The majority of the metabolites with antimicrobial activities are flavonoids and phenylpropanoids. The metabolites with plant growth regulatory effects include plant hormones. Over half of the DB contents are related to human health care and medicine. The five largest groups are toxins, anticancer agents, nervous system agents, cardiovascular agents and non-therapeutic agents, such as flavors and fragrances. The KNApSAcK Metabolite Activity DB is integrated within the KNApSAcK Family DBs to facilitate further systematized research in various omics fields, especially metabolomics, nutrigenomics and foodomics. The KNApSAcK Metabolite Activity DB could also be utilized for developing novel drugs and materials, as well as for identifying viable drug resources and other useful compounds.

  14. Map and Data for Quaternary Faults and Fault Systems on the Island of Hawai`i

    USGS Publications Warehouse

    Cannon, Eric C.; Burgmann, Roland; Crone, Anthony J.; Machette, Michael N.; Dart, Richard L.

    2007-01-01

    Introduction This report and digitally prepared, GIS-based map is one of a series of similar products covering individual states or regions of United States that show the locations, ages, and activity rates of major earthquake-related features such as faults and fault-related folds. It is part of a continuing the effort to compile a comprehensive Quaternary fault and fold map and database for the United States, which is supported by the U.S. Geological Survey's (USGS) Earthquake Hazards Program. Guidelines for the compilation of the Quaternary fault and fold maps for the United States were published by Haller and others (1993) at the onset of this project. This compilation of Quaternary surface faulting and folding in Hawai`i is one of several similar state and regional compilations that were planned for the United States. Reports published to date include West Texas (Collins and others, 1996), New Mexico (Machette and others, 1998), Arizona (Pearthree, 1998), Colorado (Widmann and others, 1998), Montana (Stickney and others, 2000), Idaho (Haller and others, 2005), and Washington (Lidke and others, 2003). Reports for other states such as California and Alaska are still in preparation. The primary intention of this compilation is to aid in seismic-hazard evaluations. The report contains detailed information on the location and style of faulting, the time of most recent movement, and assigns each feature to a slip-rate category (as a proxy for fault activity). It also contains the name and affiliation of the compiler, date of compilation, geographic and other paleoseismologic parameters, as well as an extensive set of references for each feature. The map (plate 1) shows faults, volcanic rift zones, and lineaments that show evidence of Quaternary surface movement related to faulting, including data on the time of most recent movement, sense of movement, slip rate, and continuity of surface expression. This compilation is presented as a digitally prepared map product

  15. Roughness of Frictional Sliding Surfaces in Actively Creeping Gouge of the San Andreas Fault

    NASA Astrophysics Data System (ADS)

    Hadizadeh, J.; Candela, T.; Renard, F.

    2012-12-01

    We studied microstructure and morphology of sliding surfaces in SAFOD gouge from 3197.2m MD within the actively creeping interval SDZ. The gouge is composed of Mg-rich-smectite clays interspersed with rounded lithic fragments and serpentinite porphyroclasts. At core scale, the gouge has a granular texture with anastomosing slickenside surfaces. Microscopically, the gouge shows lozenge-shaped fabric defined by microlithons separated along highly striated surfaces. We describe as first order (S1) the surfaces that crosscut the gouge fabric, and as the second order (S2) the surfaces bounding the microlithons. Some S1 surfaces were lined with 1-5 micron thick film of ultracataclasite isochemical with the underlying gouge. We ask whether the roughness properties of the gouge sliding surfaces are comparable to outcrop-scale fault surfaces studied by others, and how these properties might relate to mechanism of the deformation. Digital elevation model (DEM) of several typical S1 and S2 surface samples were produced using high resolution white light interferometry microscope. Scanning noise and sampling artifacts were removed from the raw DEMs. Profiles parallel and perpendicular to sliding were derived from the clean DEMs and the surface roughness, represented by Hurst exponent H, was estimated for all samples from the slope of the profile Fourier Power Spectrum each for parallel (HL) and perpendicular (HA) to sliding. Results: 1. the roughness spectra were characterized by two rather than one scaling regime with a crossover length-scale range of 5-25 micron. 2. both S1 and S2 surfaces were anisotropic (HL-HA)<0 above the crossover, and roughly isotropic below the crossover length scale. HL=0.6+/-0.1 and HA=0.8+/-0.1 for the anisotropic regime and HL=HA=0.3+/-0.1 for the isotropic regime. 3. S2 surfaces are smoother compared to S1 surfaces. The Hurst exponent values for the gouge surfaces in the anisotropic regime are similar to those found for a number of outcrop

  16. Tectonic Geomorphology of an Active Low-Angle Normal Fault, Sierra El Mayor, Northern Baja California

    NASA Astrophysics Data System (ADS)

    Fletcher, J. M.; Spelz, R.

    2007-05-01

    Low angle normal faults (LANF) are ubiquitously distributed throughout the northern Gulf of California. They commonly bound uplifted mountain ranges and are found in numerous seismic sections in the Altar Desert and Wagner Basin (A. Martin, unpublished data). The Canada David detachment (CDD) is a spectacular example of an active LANF that controls the western mountain front of Sierra El Mayor over a strike length of 60 Km. Like most LANFs, the CDD contains two prominent antiform-synform megamullion pairs that strongly control the tectonic geomorphology of the uplifted footwall block and alluvial terraces along the range flank. Quantitative morphometric analysis along the mountain front shows that drainage basins in antiformal domains have systematically higher outlet elevations, higher gradients, greater relief, and much greater hypsometric integrals. Additionally river valleys are narrower and dominated by bedrock channels that extend nearly to the outlet, which is consistent with the fact that mountain front sinuosity is almost an order of magnitude less in the antiformal domains. A sequence of as many as 8 different regional strath terraces are preserved along the range flank and reconnaissance dating of the deposits by cosmogenic isotopes suggests that they formed during the major interglacial-to-glacial climatic transitions. Strath terraces are generally much older, and relative heights between terraces is significantly lower in synformal domains. All of these geomorphologic characteristics suggest that the synformal domains have experienced much lower rates of uplift and erosion of the footwall and likewise lower rates of sedimentation in the adjacent hanging wall basin. The lack of slip gradients on the master fault between synformal and antiformal domains suggests that the megamullions formed instead by regional buckling perpendicular to the extension direction. A Quaternary scarp array extends along the entire length of the mountain front and also shows

  17. Self healing of open circuit faults: With active re-configurability and mimicry of synaptic plasticity

    NASA Astrophysics Data System (ADS)

    Yaswant, Vaddi; Kumar, Amit; Sambandan, Sanjiv

    2016-07-01

    We discuss the self-repair of open faults in circuits using electrically conductive particles dispersed in an insulating fluid. The repair is triggered by the electric field developed across the open circuit in a current carrying interconnect and results in the formation of a bridge of particles across the gap. We illustrate and model the dynamics of the resistance of the self-healed route, Rb, in low field conditions. Furthermore, active control of Rb and active re-wiring are also demonstrated. Considering Rb to be akin to weights between nodes, the formation and re-wiring of routes and the control of Rb mimic synaptic plasticity in biological systems and open interesting possibilities for computing.

  18. 3D Modelling of Seismically Active Parts of Underground Faults via Seismic Data Mining

    NASA Astrophysics Data System (ADS)

    Frantzeskakis, Theofanis; Konstantaras, Anthony

    2015-04-01

    During the last few years rapid steps have been taken towards drilling for oil in the western Mediterranean sea. Since most of the countries in the region benefit mainly from tourism and considering that the Mediterranean is a closed sea only replenishing its water once every ninety years careful measures are being taken to ensure safe drilling. In that concept this research work attempts to derive a three dimensional model of the seismically active parts of the underlying underground faults in areas of petroleum interest. For that purpose seismic spatio-temporal clustering has been applied to seismic data to identify potential distinct seismic regions in the area of interest. Results have been coalesced with two dimensional maps of underground faults from past surveys and seismic epicentres, having followed careful reallocation processing, have been used to provide information regarding the vertical extent of multiple underground faults in the region of interest. The end product is a three dimensional map of the possible underground location and extent of the seismically active parts of underground faults. Indexing terms: underground faults modelling, seismic data mining, 3D visualisation, active seismic source mapping, seismic hazard evaluation, dangerous phenomena modelling Acknowledgment This research work is supported by the ESPA Operational Programme, Education and Life Long Learning, Students Practical Placement Initiative. References [1] Alves, T.M., Kokinou, E. and Zodiatis, G.: 'A three-step model to assess shoreline and offshore susceptibility to oil spills: The South Aegean (Crete) as an analogue for confined marine basins', Marine Pollution Bulletin, In Press, 2014 [2] Ciappa, A., Costabile, S.: 'Oil spill hazard assessment using a reverse trajectory method for the Egadi marine protected area (Central Mediterranean Sea)', Marine Pollution Bulletin, vol. 84 (1-2), pp. 44-55, 2014 [3] Ganas, A., Karastathis, V., Moshou, A., Valkaniotis, S., Mouzakiotis

  19. Left-lateral active deformation along the Mosha-North Tehran fault system (Iran): Morphotectonics and paleoseismological investigations

    NASA Astrophysics Data System (ADS)

    Solaymani Azad, Shahryar; Ritz, Jean-François; Abbassi, Mohammad Reza

    2011-01-01

    The Mosha and North Tehran faults correspond to the nearest seismic sources for the northern part of the Tehran megacity. The present-day structural relationships and the kinematics of these two faults, especially at their junction in Lavasanat region, is still a matter of debate. In this paper, we present the results of a morphotectonic analysis (aerial photos and field investigations) within the central part of the Mosha and eastern part of the North Tehran faults between the Mosha valley and Tehran City. Our investigations show that, generally, the traces of activity do not follow the older traces corresponding to previous long-term dip-slip thrusting movements. The recent faulting mainly occurs on new traces trending E-W to ENE-WSW affecting Quaternary features (streams, ridges, risers, and young glacial markers) and cutting straight through the topography. Often defining en-echelon patterns (right- and left-stepping), these new traces correspond to steep faults with either north- or south-dipping directions, along which clear evidences for left-lateral strike-slip motion are found. At their junction zone, the two sinistral faults display a left-stepping en-echelon pattern defining a positive flower structure system clearly visible near Ira village. Further west, the left-lateral strike-slip motion is transferred along the ENE-WSW trending Niavaran fault and other faults. The cumulative offsets associated with this left-lateral deformation is small compared with the topography associated with the previous Late Tertiary thrusting motion, showing that it corresponds to a recent change of kinematics.

  20. Active normal fault network of the Apulian Ridge (Eastern Mediterranean Sea) imaged by multibeam bathymetry and seismic data

    NASA Astrophysics Data System (ADS)

    Pellegrini, Claudio; Marchese, Fabio; Savini, Alessandra; Bistacchi, Andrea

    2016-04-01

    The Apulian ridge (North-eastern Ionian margin - Mediterranean Sea) is formed by thick cretaceous carbonatic sequences and discontinuous tertiary deposits crosscut by a NNW-SSE penetrative normal fault system and is part of the present foreland system of both the Apennine to the west and the Hellenic arc to the east. The geometry, age, architecture and kinematics of the fault network were investigated integrating data of heterogeneous sources, provided by previous studies: regional scale 2D seismics and three wells collected by oil companies from the '60s to the '80s, more recent seismics collected during research projects in the '90s, very high resolution seismic (VHRS - Sparker and Chirp-sonar data), multi-beam echosounder bathymetry and results from sedimentological and geo-chronological analysis of sediment samples collected on the seabed. Multibeam bathymetric data allowed in particular assessing the 3D continuity of structures imaged in 2D seismics, thanks to the occurrence of continuous fault scarps on the seabed (only partly reworked by currents and covered by landslides), revealing the vertical extent and finite displacement associated to fault scarps. A penetrative network of relatively small faults, always showing a high dip angle, composes the NNW-SSE normal fault system, resulting in frequent relay zones, which are particularly well imaged by seafloor geomorphology. In addition, numerous fault scarps appear to be roughly coeval with quaternary submarine mass-wasting deposits colonised by Cold-Water Corals (CWC). Coral colonies, yielding ages between 11 and 14 kA, develop immediately on top of late Pleistocene mass-wasting deposits. Mutual cross-cutting relationships have been recognized between fault scarps and landslides, indicating that, at least in places, these features may be coeval. We suppose that fault activity lasted at least as far as the Holocene-Pleistocene boundary and that the NNW-SSW normal fault network in the Apulian Plateau can be

  1. Slip sense inversion on active strike-slip faults in southwest Japan and its implications for Cenozoic tectonic evolution

    NASA Astrophysics Data System (ADS)

    Maruyama, Tadashi; Lin, Aiming

    2004-05-01

    Analyses of deflected river channels, offset of basement rocks, and fault rock structures reveal that slip sense inversion occurred on major active strike-slip faults in southwest Japan such as the Yamasaki and Mitoke fault zones and the Median Tectonic Line (MTL). Along the Yamasaki and Mitoke fault zones, small-size rivers cutting shallowly mountain slopes and Quaternary terraces have been deflected sinistrally, whereas large-size rivers which deeply incised into the Mio-Pliocene elevated peneplains show no systematically sinistral offset or complicated hairpin-shaped deflection. When the sinistral offsets accumulated on the small-size rivers are restored, the large-size rivers show residual dextral deflections. This dextral offset sense is consistent with that recorded in the pre-Cenozoic basement rocks. S-C fabrics of fault gouge and breccia zone developed in the active fault zones show sinistral shear sense compatible with earthquake focal mechanisms, whereas those of the foliated cataclasite indicate a dextral shear sense. These observations show that the sinistral strike-slip shear fabrics were overprinted on dextral ones which formed during a previous deformation phase. Similar topographic and geologic features are observed along the MTL in the central-eastern part of the Kii Peninsula. Based on these geomorphological and geological data, we infer that the slip sense inversion occurred in the period between the late Tertiary and mid-Quaternary period. This strike-slip inversion might result from the plate rearrangement consequent to the mid-Miocene Japan Sea opening event. This multidisciplinary study gives insight into how active strike-slip fault might evolves with time.

  2. Neotectonic to Active Tectonic Situation along Ulsan-Yeonil Faults, SE. Korea

    NASA Astrophysics Data System (ADS)

    Choi, S.; Chwae, U.

    2006-05-01

    Characteristics of middle to late Pleistocene faults occurred along NNW Ulsan-Yeonil faults, SE. Korea, have been controverted during last decade due to very short and frequent distribution. Those faults, having NS strike and dip to the east, generally show the top-up-to-the-west movement sense. ESR ages came out 300ka in average and OSL data range 90-50ka. Therefore the faults movement could be considered to two times within 500ka, which indicates capable fault. Earthquake around the region ranges middle to weak. Historic earthquake record described damages of wooden house and some roof tiles, which is not considered as strong as mm6.5-7.0. However tectonic background has been remained yet. In this study, the aim is to figure out geometric relationship between NNW Ulsan fault and Yeonil fault and addresses how the above capable faults have left step pattern of NS strike and left lateral movement sense. As early stage around 23Ma, the eastern block of Yeonil fault had begun to rotate to clockwise due to right lateral movement of two master faults, which are interpreted to Yansan fault and possibly Tsushima tectonic line. Yeonil block, which was in between two master faults, had been undergone the effect of clockwise rotation until around 15ma. The western margin of Yeonil block, which strikes NNW and parallel to sub-parallel to Ulsan fault, had jigsaw-type left lateral movement sense because of the clockwise fan-shape rotation. Among those jigsaw-type fault segments, NS fault segments have been given the westward tectonic pressure since 5Ma. Therefore, small NS-faults have had the top-up-to-the-west movement sense up to present time since after Pliocene and those jigsaw-type fault length yielded to short due to several intermittent shearing along NNW Ulsan fault. As an early product, two Miocene basins developed along Ulsan fault, which strike is not shown because of flat plain.

  3. Activated charcoal. (Latest citations from the Compendex database). Published Search

    SciTech Connect

    Not Available

    1993-06-01

    The bibliography contains citations concerning theoretical aspects and industrial applications of activated charcoal. Topics include adsorption capacity and mechanism studies, kinetic and thermodynamic aspects, and description and evaluation of adsorptive abilities. Applications include use in water analyses and waste treatment, air pollution control and measurement, and in nuclear facilities. (Contains a minimum of 151 citations and includes a subject term index and title list.)

  4. Seismicity, fault plane solutions, depth of faulting, and active tectonics of the Andes of Peru, Ecuador, and southern Colombia

    NASA Technical Reports Server (NTRS)

    Suarez, G.; Molnar, P.; Burchfiel, B. C.

    1983-01-01

    The long-period P waveforms observed for 17 earthquakes in the Peruvian Andes during 1963-1976 are compared with synthetic waveforms to obtain fault-plane solutions and focal depths. The morphological units of the Peruvian Andes are characterized: coastal plains, Cordillera Occidental, altiplano and central high plateau, Cordillera Oriental, and sub-Andes. The data base and analysis methodology are discussed, and the results are presented in tables, diagrams, graphs, maps, and photographs illustrating typical formations. Most of the earthquakes are shown to occur in the transition zone from the sub-Andes to the Cordillera Oriental under formations of about 1 km elevation at focal depths of 10-38 km. It is suggested that the sub-Andean earthquakes reflect hinterland deformation of a detached fold and thrust belt, perhaps like that which occurred in parts of the Canadian Rockies. From the total crustal shortening evident in Andean morphology and the shortening rate of the recent earthquakes it is estimated that the topography and crustal root of the Andes have been formed during the last 90-135 Myr.

  5. Reconstruction of fault zone evolution from 40Ar/39Ar white mica, zircon and apatite fission track, and apatite U/Th-He thermochronology: 65 million years of fault activity along the Lavanttal Fault Zone (Eastern Alps)?

    NASA Astrophysics Data System (ADS)

    Kurz, Walter; Woelfler, Andreas; Rabitsch, Robert; Genser, Johann

    2010-05-01

    , and 43.6 ± 2.1 and 34.3 ± 1.8 Ma along the western margin. Single grain ages are variable within fault core rocks and range from 76.5±12.3 to 3.6±1.3 Ma. These samples do not pass the chi-square test and can be decomposed into two age clusters. The dominant age components yield a weighted mean of 56.1±4.3 Ma and 8.6±2.6 Ma. Samples from the fault cores show significantly reduced mean track lengths (MTL). There is a clear relationship between single grain ages, MTL and Dpar values. Therefore the smallest Dpar values are associated with the youngest single grain ages and the shortest MTĹs. Referring to the (U-Th)/He analysis a trend of decreasing ages from the host rock toward the damage zones and fault cores can be observed. The weighted mean age from the host rock is 11.8±3.2, from the damage zones 7.4±1.5 and 6.2±1.3 Ma and 4.7±0.5, 5.7±1.3 and 4.8±2.0 Ma from the fault cores. Thse thermochronoloical ages document that the exhumation and cooling of the Koralm massif was mainly completed at the end of the Cretaceous. Argon release spectra from muscovites in cataclastic shear zones show in parts highly reduced incremental ages. Rejuvenation of zircon fission track ages along the LFZ indicates a first phase of fault activity around 65 Ma and is most probably related to the subsidence evolution of the Central Alpine Gosau basins. Recognition of this displacement event is hampered by the fact that the spatial distribution of Late Cretaceous structural elements coincide frequently with Miocene extrusion-related structures. Fault zones within the Eastern Alps commonly regarded to have formed during the lateral extrusion event in Miocene times may therefore represent reactivated structures that formed during a Late Cretaceous event of orogen extension. Continuous displacement along the LFZ until Pliocene times is indicated by single grain apatite and U/Th-He ages.

  6. Modeling of fluid injection and withdrawal induced fault activation using discrete element based hydro-mechanical and dynamic coupled simulator

    NASA Astrophysics Data System (ADS)

    Yoon, Jeoung Seok; Zang, Arno; Zimmermann, Günter; Stephansson, Ove

    2016-04-01

    Operation of fluid injection into and withdrawal from the subsurface for various purposes has been known to induce earthquakes. Such operations include hydraulic fracturing for shale gas extraction, hydraulic stimulation for Enhanced Geothermal System development and waste water disposal. Among these, several damaging earthquakes have been reported in the USA in particular in the areas of high-rate massive amount of wastewater injection [1] mostly with natural fault systems. Oil and gas production have been known to induce earthquake where pore fluid pressure decreases in some cases by several tens of Mega Pascal. One recent seismic event occurred in November 2013 near Azle, Texas where a series of earthquakes began along a mapped ancient fault system [2]. It was studied that a combination of brine production and waste water injection near the fault generated subsurface pressures sufficient to induced earthquakes on near-critically stressed faults. This numerical study aims at investigating the occurrence mechanisms of such earthquakes induced by fluid injection [3] and withdrawal by using hydro-geomechanical coupled dynamic simulator (Itasca's Particle Flow Code 2D). Generic models are setup to investigate the sensitivity of several parameters which include fault orientation, frictional properties, distance from the injection well to the fault, amount of fluid withdrawal around the injection well, to the response of the fault systems and the activation magnitude. Fault slip movement over time in relation to the diffusion of pore pressure is analyzed in detail. Moreover, correlations between the spatial distribution of pore pressure change and the locations of induced seismic events and fault slip rate are investigated. References [1] Keranen KM, Weingarten M, Albers GA, Bekins BA, Ge S, 2014. Sharp increase in central Oklahoma seismicity since 2008 induced by massive wastewater injection, Science 345, 448, DOI: 10.1126/science.1255802. [2] Hornbach MJ, DeShon HR

  7. The 2013 earthquake swarm in Helike, Greece: seismic activity at the root of old normal faults

    NASA Astrophysics Data System (ADS)

    Kapetanidis, V.; Deschamps, A.; Papadimitriou, P.; Matrullo, E.; Karakonstantis, A.; Bozionelos, G.; Kaviris, G.; Serpetsidaki, A.; Lyon-Caen, H.; Voulgaris, N.; Bernard, P.; Sokos, E.; Makropoulos, K.

    2015-09-01

    The Corinth Rift in Central Greece has been studied extensively during the past decades, as it is one of the most seismically active regions in Europe. It is characterized by normal faulting and extension rates between 6 and 15 mm yr-1 in an approximately N10E° direction. On 2013 May 21, an earthquake swarm was initiated with a series of small events 4 km southeast of Aigion city. In the next days, the seismic activity became more intense, with outbursts of several stronger events of magnitude between 3.3 and 3.7. The seismicity migrated towards the east during June, followed by a sudden activation of the western part of the swarm on July 15th. More than 1500 events have been detected and manually analysed during the period between 2013 May 21 and August 31, using over 15 local stations in epicentral distances up to 30 km and a local velocity model determined by an error minimization method. Waveform similarity-based analysis was performed, revealing several distinct multiplets within the earthquake swarm. High-resolution relocation was applied using the double-difference algorithm HypoDD, incorporating both catalogue and cross-correlation differential traveltime data, which managed to separate the initial seismic cloud into several smaller, densely concentrated spatial clusters of strongly correlated events. Focal mechanism solutions for over 170 events were determined using P-wave first motion polarities, while regional waveform modelling was applied for the calculation of moment tensors for the 18 largest events of the sequence. Selected events belonging to common spatial groups were considered for the calculation of composite mechanisms to characterize different parts of the swarm. The solutions are mainly in agreement with the regional NNE-SSW extension, representing typical normal faulting on 30-50° north-dipping planes, while a few exhibit slip in an NNE-SSW direction, on a roughly subhorizontal plane. Moment magnitudes were calculated by spectral analysis

  8. Transition from collision to subduction in Western Greece: the Katouna-Stamna active fault system and regional kinematics

    NASA Astrophysics Data System (ADS)

    Pérouse, E.; Sébrier, M.; Braucher, R.; Chamot-Rooke, N.; Bourlès, D.; Briole, P.; Sorel, D.; Dimitrov, D.; Arsenikos, S.

    2016-06-01

    Transition from subduction to collision occurs in Western Greece and is accommodated along the downgoing plate by the Kefalonia right-lateral fault that transfers the Hellenic subduction front to the Apulian collision front. Here we present an active tectonic study of Aitolo-Akarnania (Western Greece) that highlights how such a transition is accommodated in the overriding plate. Based on new multi-scale geomorphic and tectonic observations, we performed an accurate active fault trace mapping in the region, and provide evidence for active normal and left-lateral faulting along the Katouna-Stamna Fault (KSF), a 65-km-long NNW-striking fault system connecting the Amvrakikos Gulf to the Patras Gulf. We further show that the Cenozoic Hellenide thrusts located west of the KSF are no longer active, either in field observation or in GPS data, leading us to propose that the KSF forms the northeastern boundary of a rigid Ionian Islands-Akarnania Block (IAB). Cosmic ray exposure measurements of 10Be and 36Cl were performed on a Quaternary alluvial fan offset along the KSF (~50 m left-lateral offset). A maximum abandonment age of ~12-14 ka for the alluvial fan surface can be determined, giving an estimated KSF minimum geological left-lateral slip rate of ~4 mm year-1, in agreement with high GPS slip rates (~10 mm year-1). Despite this high slip rate, the KSF is characterized by subdued morphological evidence of tectonic activity, a gypsum-breccia bedrock and a low level of seismicity, suggesting a dominantly creeping behavior for this fault. Finally, we discuss how the IAB appears to have been progressively individualized during the Pleistocene (younger than ~1.5 Ma).

  9. Normal faulting along the western side of the Matese Mountains: Implications for active tectonics in the Central Apennines (Italy)

    NASA Astrophysics Data System (ADS)

    Boncio, Paolo; Dichiarante, Anna Maria; Auciello, Eugenio; Saroli, Michele; Stoppa, Francesco

    2016-01-01

    We provide new field data from geologic mapping and bedrock structural geology along the western side of the Matese Mts in central Italy, a region of high seismicity, strain rates among the highest of the entire Apennines (4-5 mm/yr GPS-determined extension), and poorly constrained active faults. The existing knowledge on the Aquae Iuliae normal fault (AIF) was implemented with geometric and kinematic data that better constrain its total length (16.5 km), the minimum long-term throw rate (0.3-0.4 mm/yr, post-late glacial maximum, LGM), and the segmentation. For the first time, we provide evidence of post-350 ka and possibly late Quaternary activity of the Ailano - Piedimonte Matese normal fault (APMF). The APMF is 18 km long. It is composed of a main 11 km-long segment striking NW-SE and progressively bending to the E-W in its southern part, and a 7 km-long segment striking E-W to ENE-WSW with very poor evidence of recent activity. The available data suggest a possible post-LGM throw rate of the main segment of ≳0.15 mm/yr. There is no evidence of active linkage in the step-over zone between the AIF and APMF (Prata Sannita step-over). An original tectonic model is proposed by comparing structural and geodetic data. The AIF and APMF belong to two major, nearly parallel fault systems. One system runs at the core of the Matese Mts and is formed by the AIF and the faults of the Gallo-Letino-Matese Lake system. The other system runs along the western side of the Matese Mts and is formed by the APMF, linked to the SE with the Piedimonte Matese - Gioia Sannitica fault. The finite extension of the APMF might be transferred to the NW towards the San Pietro Infine fault. The nearly 2-3 mm/yr GPS-determined extension rate is probably partitioned between the two systems, with a ratio that is difficult to establish due to poor GPS coverage. The proposed model, though incomplete (several faults/transfer zones need further investigations), aids in the seismotectonic

  10. Constraining deformation history and recent activity along the Tuz Gölü fault zone, Central Anatolia, Turkey

    NASA Astrophysics Data System (ADS)

    Krystopowicz, N. J.; Schoenbohm, L. M.; Cosca, M. A.

    2013-12-01

    The 200 km long, dextral, transtensive Tuz Gölü fault zone is a prominent northwest-striking feature in Central Anatolia. It is one of the most significant structures in Central Anatolia in that it lies within the transition zone between the Western Anatolian Extensional Province and the Eastern Anatolian Contractional Province; its study therefore offers valuable insight into how Central Anatolia is affected by lateral extrusion related to collision in the east, and gravitational pull forces associated with subduction in the west. Proposals for the initiation of the Tuz Gölü fault zone range from Cretaceous to Neogene times, and the amount of recent activity along this fault system remains poorly constrained. Furthermore, potential basinward migration of deformation into the Tuz Gölü basin poses the question as to whether or not this fault system is active in the Holocene. Previous work suggests that migration of deformation towards the basin interior may be related to lithospheric-scale processes such as plateau development, microplate extrusion, or the onset of crustal thinning associated with slab-tear propagation in subducting African lithosphere. In this study, we use a combination of paleostress and morpho-tectonic analysis to further delineate the segmentation and present activity of the Tuz Gölü fault zone. Paleostress analysis offers insight into the deformation history of the region as well as the modern-day stress regime. We conducted a morphometric analysis of over 300 drainage basins along the range-front, which reveal variations that characterize the unique development of numerous fault strands in the region. Statistical analysis of hypsometric curves, systematic variation in basin morphology and orientation, as well as changes in mountain-front sinuosity reveal fault segmentation. Additionally, field mapping and Ar-Ar dating of offset lava flows from the Hasan Dag Volcano quantitatively constrain slip-rates in the southeastern portion of the

  11. Stress-strain sensor for monitoring seismic precursors and fault activities in the sand

    NASA Astrophysics Data System (ADS)

    Du, Qiujiao; Sun, Wei; Zeng, Zuoxun

    2016-04-01

    In this paper, a sensor to monitor stress-strain signals in a granular medium is used to detect seismic precursory information. Compared with the widely used sensors of borehole stress in the rock, the sensor has more convenient operation, higher output sensitivity, compactness and farther propagation effect. The stress and strain changes before Pu'er Ms6.4 earthquake in China are recorded by Beijing and Xinmin stations, and its corresponding fault activities are analyzed. Study indicates anomalous amplitude of strain signal reaches 10 times higher than that of ordinary background, and compressive oscillation and extensional oscillation occurred constantly before the earthquake. The method and results presented in the paper provide a new way for investigating seismic precursors for shallow-source earthquakes.

  12. Active interrogation of helicopter main rotor faults using trailing edge flap actuation

    NASA Astrophysics Data System (ADS)

    Stevens, Patricia Lynn

    Over the past decade, the helicopter community has become increasingly interested in health monitoring. The rotor system, however, is not sufficiently covered in the current Health and Usage Monitoring Systems (HUMS). This dissertation describes the development and evaluation of a new approach for detecting helicopter rotor faults in which active trailing edge flaps are used to interrogate the system. This work is based on the presumption that trailing edge flaps would be installed for the primary purpose of vibration and/or noise control; health monitoring is a secondary use. Using this approach, the blade is excited by an interrogation signal, which is a low amplitude oscillation at a few discrete frequencies. The blade response is measured and the health of the system is determined using a frequency domain damage identification algorithm. Damage detection and location are achieved via the residual force vector. The residual force vector, coupled with an understanding of the system physics, also provides nature characterization. Quantification of damage extent is achieved via a frequency domain adaptation of the Asymmetric Minimum Rank Perturbation Theory. The active interrogation system is evaluated using an aeroelastic finite element model of the rotor system in hover, including an advanced unsteady aerodynamic model to predict the trailing edge flap loads. Realistic damage models, including distributed bending stiffness damage, torsional stiffness damage, control system stiffness damage, cracks and ballistic damage, are seeded in the rotor system model. Results demonstrate detection, location and quantification of extent of all of the faults tested. The effects of noise and modeling errors are discussed and mitigation techniques are developed. Additionally, a measurability study is included. Benefits of this work include both improved health monitoring for rotorcraft as well as insights into the application of structural damage detection algorithms to a

  13. Preliminary results on the tectonic activity of the Ovacık Fault (Malatya-Ovacık Fault Zone, Turkey): Implications of the morphometric analyses

    NASA Astrophysics Data System (ADS)

    Yazıcı, Müge; Zabci, Cengiz; Sançar, Taylan; Sunal, Gürsel; Natalin, Boris A.

    2016-04-01

    The Anatolian 'plate' is being extruded westward relative to the Eurasia along two major tectonic structures, the North Anatolian and the East Anatolian shear zones, respectively making its northern and eastern boundaries. Although the main deformation is localized along these two structures, there is remarkable intra-plate deformation within Anatolia, especially which are characterized by NE-striking sinistral and NW-striking dextral strike-slip faults (Şengör et al. 1985). The Malatya-Ovacık Fault Zone (MOFZ) and its northeastern member, the Ovacık Fault (OF), is a one of the NE-striking sinistral strike slip faults in the central 'ova' neotectonic province of Anatolia, located close to its eastern boundary. Although this fault zone is claimed to be an inactive structure in some studies, the recent GPS measurements (Aktuǧ et al., 2013) and microseismic activity (AFAD, 2013) strongly suggest the opposite. In order to understand rates and patterns of vertical ground motions along the OF, we studied the certain morphometric analyses such as hypsometric curves and integrals, longitudinal channel profiles, and asymmetry of drainage basins. The Karasu (Euphrates) and Munzur rivers form the main drainage systems of the study area. We extracted all drainage network from SRTM-based Digital Elevation Model with 30 m ground pixel resolution and totally identified 40 sub-drainage basins, which are inhomogeneously distributed to the north and to the south of the OF. Most of these basins show strong asymmetry, which are mainly tilted to SW. The asymmetry relatively decreases from NE to SW in general. The only exception is at the margins of the Ovacık Basin (OB), where almost the highest asymmetry values were calculated. On the other hand, the characteristics of hypsometric curves and the calculated hypsometric integrals do not show the similar systematic spatial pattern. The hypsometric curves with convex-shaped geometry, naturally indicating relatively young morphology

  14. Preliminary results on the tectonic activity of the Ovacık Fault (Malatya-Ovacık Fault Zone, Turkey): Implications of the morphometric analyses

    NASA Astrophysics Data System (ADS)

    Yazıcı, Müge; Zabci, Cengiz; Sançar, Taylan; Sunal, Gürsel; Natalin, Boris A.

    2016-04-01

    The Anatolian 'plate' is being extruded westward relative to the Eurasia along two major tectonic structures, the North Anatolian and the East Anatolian shear zones, respectively making its northern and eastern boundaries. Although the main deformation is localized along these two structures, there is remarkable intra-plate deformation within Anatolia, especially which are characterized by NE-striking sinistral and NW-striking dextral strike-slip faults (Şengör et al. 1985). The Malatya-Ovacık Fault Zone (MOFZ) and its northeastern member, the Ovacık Fault (OF), is a one of the NE-striking sinistral strike slip faults in the central 'ova' neotectonic province of Anatolia, located close to its eastern boundary. Although this fault zone is claimed to be an inactive structure in some studies, the recent GPS measurements (Aktuǧ et al., 2013) and microseismic activity (AFAD, 2013) strongly suggest the opposite. In order to understand rates and patterns of vertical ground motions along the OF, we studied the certain morphometric analyses such as hypsometric curves and integrals, longitudinal channel profiles, and asymmetry of drainage basins. The Karasu (Euphrates) and Munzur rivers form the main drainage systems of the study area. We extracted all drainage network from SRTM-based Digital Elevation Model with 30 m ground pixel resolution and totally identified 40 sub-drainage basins, which are inhomogeneously distributed to the north and to the south of the OF. Most of these basins show strong asymmetry, which are mainly tilted to SW. The asymmetry relatively decreases from NE to SW in general. The only exception is at the margins of the Ovacık Basin (OB), where almost the highest asymmetry values were calculated. On the other hand, the characteristics of hypsometric curves and the calculated hypsometric integrals do not show the similar systematic spatial pattern. The hypsometric curves with convex-shaped geometry, naturally indicating relatively young morphology

  15. Characterization of Appalachian faults

    SciTech Connect

    Hatcher, R.D. Jr.; Odom, A.L.; Engelder, T.; Dunn, D.E.; Wise, D.U.; Geiser, P.A.; Schamel, S.; Kish, S.A.

    1988-02-01

    This study presents a classification/characterization of Appalachian faults. Characterization factors include timing of movement relative to folding, metamorphism, and plutonism; tectonic position in the orogen; relations to existing anisotropies in the rock masses; involvement of particular rock units and their ages, as well as the standard Andersonian distinctions. Categories include faults with demonstrable Cenozoic activity, wildflysch-associated thrusts, foreland bedding-plane thrusts, premetamorphic to synmetamorphic thrusts in medium- to high-grade terranes, postmetamorphic thrusts in medium- to high-grade terranes, thrusts rooted in Precambrian basement, reverse faults, strike-slip faults, normal (block) faults, compound faults, structural lineaments, faults associated with local centers of disturbance, and geomorphic (nontectonic) faults.

  16. Inferences on active faults at the Southern Alps-Liguria basin junction from accurate analysis of low energy seismicity

    NASA Astrophysics Data System (ADS)

    Turino, Chiara; Scafidi, Davide; Eva, Elena; Solarino, Stefano

    2009-10-01

    Seismotectonic studies concern themselves with understanding the distribution of earthquakes in space, time, size and style. Therefore, the better these parameters are known, the most correct the association of any seismic event with the faulting structure that caused it will result. The use of accurate location methods is especially required when dealing with very complex areas, where several faulting systems or relatively small seismogenic structures exist. In fact, even though routinely determined epicentres are capable of revealing the rough picture of the seismicity, they are not suitable for studies of the fine structure of the causative fault, as their location uncertainties are often larger than the source dimension itself. In this work the probabilistic approach of the "Non Linear Localization" has been used to compute precise locations for earthquakes occurred in the last twenty years nearby the Saorge-Taggia line, a complex fault system situated in Western Liguria, close to the border between Italy and France. Together with the Breil-Sospel-Monaco and the Peille-Laghet faults, this line is responsible for the seismic activity of the area. The seismotectonic study is completed through a local tomographic study and the analysis of the focal mechanisms computed for an enlarged area. The results show that the seismicity associated with this fault system is confined within the first 10 km depth. Many clusters of seismic events are identified along the Saorge-Taggia line. The existence of a not previously mapped branch perpendicular to the Saorge-Taggia line is also recognized. Although its position may suggest it to be the continuation of the Breil-Sospel-Monaco fault system towards NE, our finding would rather suggest no association with the fault. The overall results confirm the complexity of the area; in particular the hypothesis that the Saorge-Taggia system may represent the eastward limit of a subalpine crustal block comprised within the Nice Arc, the

  17. The southern Whidbey Island fault: An active structure in the Puget Lowland, Washington

    USGS Publications Warehouse

    Johnson, S.Y.; Potter, C.J.; Armentrout, J.M.; Miller, J.J.; Finn, C.; Weaver, C.S.

    1996-01-01

    Information from seismic-reflection profiles, outcrops, boreholes, and potential field surveys is used to interpret the structure and history of the southern Whidbey Island fault in the Puget Lowland of western Washington. This northwest-trending fault comprises a broad (as wide as 6-11 km), steep, northeast-dipping zone that includes several splays with inferred strike-slip, reverse, and thrust displacement. Transpressional deformation along the southern Whidbey Island fault is indicated by alongstrike variations in structural style and geometry, positive flower structure, local unconformities, out-of-plane displacements, and juxtaposition of correlative sedimentary units with different histories. The southern Whidbey Island fault represents a segment of a boundary between two major crustal blocks. The Cascade block to the northeast is floored by diverse assemblages of pre-Tertiary rocks; the Coast Range block to the southwest is floored by lower Eocene marine basaltic rocks of the Crescent Formation. The fault probably originated during the early Eocene as a dextral strike-slip fault along the eastern side of a continental-margin rift. Bending of the fault and transpressional deformation began during the late middle Eocene and continues to the present. Oblique convergence and clockwise rotation along the continental margin are the inferred driving forces for ongoing deformation. Evidence for Quaternary movement on the southern Whidbey Island fault includes (1) offset and disrupted upper Quaternary strata imaged on seismic-reflection profiles; (2) borehole data that suggests as much as 420 m of structural relief on the Tertiary-Quaternary boundary in the fault zone; (3) several meters of displacement along exposed faults in upper Quaternary sediments; (4) late Quaternary folds with limb dips of as much as ???9??; (5) large-scale liquefaction features in upper Quaternary sediments within the fault zone; and (6) minor historical seismicity. The southern Whidbey

  18. Integrated near surface geophysics across the active Mount Marzano Fault System (southern Italy): seismogenic hints

    NASA Astrophysics Data System (ADS)

    Galli, P. A. C.; Giocoli, A.; Peronace, E.; Piscitelli, S.; Quadrio, B.; Bellanova, J.

    2014-01-01

    Here, we describe an original geophysical multi-method approach applied to the Mount Marzano Fault System. This is one of the most hazardous seismogenic faults of the Apennines (Irpinia, southern Italy), and it was responsible for the 1980, Mw 6.9, earthquake, along with many others before. We carried out electrical resistivity tomography (ERT), ground penetrating radar (GPR) measurements, and horizontal-to-vertical spectral ratio (HVSR) microtremor analysis along several common transects designed across the potential and/or certain fault traces. The data obtained from these non-invasive, inexpensive, expeditious methods mutually integrate with and complement each other, providing a valuable subsurface image of the near surface fault architecture. ERT depicts the general shallow image of the fault zone and of the fault-controlled sedimentary basin, with the depth of the buried bedrock cross-correlated through ambient-noise HVSR results. GPR delineates the very shallow geometry of the fault and of the associated deformation. Coupled with previous paleoseismological studies, these data allow the evaluation of some fault parameters and the precise locating of the fault trace, to aid future paleoseismological investigations aimed at seismic risk reduction programs.

  19. Measuring fault tolerance with the FTAPE fault injection tool

    NASA Technical Reports Server (NTRS)

    Tsai, Timothy K.; Iyer, Ravishankar K.

    1995-01-01

    This paper describes FTAPE (Fault Tolerance And Performance Evaluator), a tool that can be used to compare fault-tolerant computers. The major parts of the tool include a system-wide fault-injector, a workload generator, and a workload activity measurement tool. The workload creates high stress conditions on the machine. Using stress-based injection, the fault injector is able to utilize knowledge of the workload activity to ensure a high level of fault propagation. The errors/fault ratio, performance degradation, and number of system crashes are presented as measures of fault tolerance.

  20. Measuring fault tolerance with the FTAPE fault injection tool

    NASA Astrophysics Data System (ADS)

    Tsai, Timothy K.; Iyer, Ravishankar K.

    1995-05-01

    This paper describes FTAPE (Fault Tolerance And Performance Evaluator), a tool that can be used to compare fault-tolerant computers. The major parts of the tool include a system-wide fault-injector, a workload generator, and a workload activity measurement tool. The workload creates high stress conditions on the machine. Using stress-based injection, the fault injector is able to utilize knowledge of the workload activity to ensure a high level of fault propagation. The errors/fault ratio, performance degradation, and number of system crashes are presented as measures of fault tolerance.

  1. Establishment of Active Traces of Lower Tagus Valley Fault Zone through an Integrated Approach

    NASA Astrophysics Data System (ADS)

    Besana-Ostman, G. M.; Vilanova, S.; Flor, A.; Canora, C.; Heleno, S.; Domingues, A.; Narciso, J.; Pinheiro, P.; Pinto, L.; Fonseca, J. F.

    2013-05-01

    Despite the occurrence of at least two damaging earthquakes in historical times - the M~7 1531 and the M6 1909 earthquakes - the Lower Tagus Valley Fault Zone (LTVFZ) has only recently been mapped (Besana-Ostman et al., 2012). In addition, a new set of active traces has been identified to the east during recent analysis and field inspections. The major challenges to the identification of active traces within Lower Tagus Valley (LTV) are both the presence of the very dynamic Tagus River (LTR) and the extensive urban and agricultural modifications introduced in the landscape. The detailed reports on the geological effects of the 1909 earthquake, while documenting extensively the secondary, shaking-related effects, provide no indication of surface rupture. The active traces of the northeast-southwest trending left-lateral LTVFZ within the LTV were established through integrated approaches as follows: aerial photo analysis, drainage system and satellite images examination, geomorphic feature identification, field mapping, geomorphic index measurements and trenching. The mapped traces extend to about 80 kilometers long and transect Quaternary and Holocene deposits. The mapped length of the western splay is compatible with an M7.2 earthquake. On the other hand, the newly mapped eastern traces plot almost parallel with the western splay, which may extend southwards to a comparable length. Preliminary analysis of satellite data show some evidence of additional splays located further east and south relative to the LTV. The new active traces suggest that the LTVFZ is a left-stepping left-lateral fault system with a regional NNE-SSW trend. Moreover, its extent and kinematics suggest magnitudes higher than previously assessed for the region. The location of the active traces displays a better correlation with the damage distribution of the historical events. Given the significance and implications of these findings for earthquake hazards assessment in Portugal, further studies

  2. Hanging canyons of Haida Gwaii, British Columbia, Canada: Fault-control on submarine canyon geomorphology along active continental margins

    NASA Astrophysics Data System (ADS)

    Harris, Peter T.; Barrie, J. Vaughn; Conway, Kim W.; Greene, H. Gary

    2014-06-01

    Faulting commonly influences the geomorphology of submarine canyons that occur on active continental margins. Here, we examine the geomorphology of canyons located on the continental margin off Haida Gwaii, British Columbia, that are truncated on the mid-slope (1200-1400 m water depth) by the Queen Charlotte Fault Zone (QCFZ). The QCFZ is an oblique strike-slip fault zone that has rates of lateral motion of around 50-60 mm/yr and a small convergent component equal to about 3 mm/yr. Slow subduction along the Cascadia Subduction Zone has accreted a prism of marine sediment against the lower slope (1500-3500 m water depth), forming the Queen Charlotte Terrace, which blocks the mouths of submarine canyons formed on the upper slope (200-1400 m water depth). Consequently, canyons along this margin are short (4-8 km in length), closely spaced (around 800 m), and terminate uniformly along the 1400 m isobath, coinciding with the primary fault trend of the QCFZ. Vertical displacement along the fault has resulted in hanging canyons occurring locally. The Haida Gwaii canyons are compared and contrasted with the Sur Canyon system, located to the south of Monterey Bay, California, on a transform margin, which is not blocked by any accretionary prism, and where canyons thus extend to 4000 m depth, across the full breadth of the slope.

  3. Multi-phase inversion tectonics related to the Hendijan-Nowrooz-Khafji Fault activity, Zagros Mountains, SW Iran

    NASA Astrophysics Data System (ADS)

    Kazem Shiroodi, Sadjad; Ghafoori, Mohammad; Faghih, Ali; Ghanadian, Mostafa; Lashkaripour, Gholamreza; Hafezi Moghadas, Naser

    2015-11-01

    Distinctive characteristics of inverted structures make them important criteria for the identification of certain structural styles of folded belts. The interpretation of 3D seismic reflection and well data sheds new light on the structural evolution and age of inverted structures associated to the Hendijan-Nowrooz-Khafji Fault within the Persian Gulf Basin and northeastern margin of Afro-Arabian plate. Analysis of thickness variations of growth strata using "T-Z plot" (thickness versus throw plot) method revealed the kinematics of the fault. Obtained results show that the fault has experienced a multi-phase evolutionary history over six different extension and compression deformation events (i.e. positive and negative inversion) between 252.2 and 11.62 Ma. This cyclic activity of the growth fault was resulted from alteration of sedimentary processes during continuous fault slip. The structural development of the study area both during positive and negative inversion geometry styles was ultimately controlled by the relative motion between the Afro-Arabian and Central-Iranian plates.

  4. The role of mechanical heterogeneities in evaporite sequence during deformation initiated by basement fault activity

    NASA Astrophysics Data System (ADS)

    Adamuszek, Marta; Dabrowski, Marcin; Burliga, Stanisław

    2016-04-01

    Kłodawa Salt Structure (KSS) situated in the centre of the Polish Zechstein Basin started to rise above a basement fault in the Early Triassic. Geological studies of the KSS revealed significant differences in the deformation patterns between the PZ1-PZ2 (intensely deformed) and PZ3-PZ4 (less deformed) cycle evaporites. These two older and two younger cycle evaporite complexes are separated by the thick Main Anhydrite (A3) bed. We use numerical simulations to assess the impact of a thick anhydrite bed on intrasalt deformation. In our models, the overburden consists of clastic sediments. A normal fault located in the rigid basement beneath the salt is activated due to model extension. At the same time, the sedimentation process takes place. The evaporites consist of a salt bed intercalated with a thick anhydrite layer of varying position and geometry. To understand the role of anhydrite layer, we run comparative simulations, in which no anhydrite layer is present. In the study, we use our own numerical codes implemented in MATLAB combined with the MILAMIN and MUTILS numerical packages. Our investigations revealed a significant influence of the anhydrite on deformation style in the evaporate series. The supra-anhydrite domain is characterized by weaker deformation and lower rates of salt flow in comparison to the sub-anhydrite domain. The highest contrast in the rate of salt flow between the two domains is observed in the case of the anhydrite layer situated close to the bottom of the salt complex. The thick anhydrite layer additionally diminishes the deformation rate in the supra-anhydrite domain and can lead to detachment of the basement deformation from its overlay. Our numerical simulations showed that the presence of the A3 Main Anhydrite bed could be the dominant factor responsible for the decoupling of deformation in the KSS salt complex.

  5. Active source monitoring at the Wenchuan fault zone: coseismic velocity change associated with aftershock event and its implication

    NASA Astrophysics Data System (ADS)

    Yang, Wei; Ge, Hongkui; Wang, Baoshan; Hu, Jiupeng; Yuan, Songyong; Qiao, Sen

    2014-12-01

    With the improvement of seismic observation system, more and more observations indicate that earthquakes may cause seismic velocity change. However, the amplitude and spatial distribution of the velocity variation remains a controversial issue. Recent active source monitoring carried out adjacent to Wenchuan Fault Scientific Drilling (WFSD) revealed unambiguous coseismic velocity change associated with a local M s5.5 earthquake. Here, we carry out forward modeling using two-dimensional spectral element method to further investigate the amplitude and spatial distribution of observed velocity change. The model is well constrained by results from seismic reflection and WFSD coring. Our model strongly suggests that the observed coseismic velocity change is localized within the fault zone with width of ~120 m rather than dynamic strong ground shaking. And a velocity decrease of ~2.0 % within the fault zone is required to fit the observed travel time delay distribution, which coincides with rock mechanical experiment and theoretical modeling.

  6. A test of the longevity of impact-induced faults as preferred sites for later tectonic activity

    NASA Technical Reports Server (NTRS)

    Solomon, Sean C.; Duxbury, Elizabeth D.

    1987-01-01

    The hypothesis that impact-induced faults have been preferred sites for later deformation in response to lithospheric stresses has been suggested for several planets and satellites. This hypothesis is investigated on earth by examining whether terrestrial impact structures show higher rates of nearby earthquake activity than do surrounding intraplate regions. For 28 of 30 probable impact structures having an original crater 20 km or more in diameter, the rates of nearby seismicity have been no higher than the regional background rates. For two large probable impact structures, Vredefort and Charlevoix, with higher than normal rates of nearby seismicity, factors other than slip on impact-induced faults appear to control the occurrence of earthquakes. It is concluded that impact-induced faults, at least on earth, do not persist as lithospheric 'weak zones' for periods in excess of several million years after the impact event.

  7. Active tectonics along the Wadi Araba-Jordan Valley transform fault

    NASA Astrophysics Data System (ADS)

    Galli, Paolo

    1999-02-01

    A geological study has been carried out along the 200 km long Wadi Araba following the transform fault that separates the Arabian and Sinai-African Plates. Recent movements along this structure affect upper Pleistocene-Holocene deposits and archaeological sites. Kinematic indicators show sinistral strike-slip and oblique movements, in agreement with the relative motion between the two plates. Other evidence of recent horizontal displacement exists along the Jordan Valley Fault, both on the Dead Sea-Lake Tiberias segment and on the segment north of Lake Tiberias. A minimum horizontal slip rate of 1 cm yr-1 has been estimated for both the southern segment of the Wadi Araba Fault and for the southern Jordan River Fault. The two faults can be roughly subdivided into at least four segments: two in the Wadi Araba (80 km long each), one from the Dead Sea to Lake Tiberias (130 km), and one from Lake Tiberias to the Hula graben (>30 km). Faulting may also occur along shorter subsegments, as shown by bends in the Wadi Araba-Jordan River Fault and by the growth of local compression and extension features. Instrument-recorded seismicity appears to be mainly concentrated along some of these subsegments. A comparison between the observed seismic and field-determined slip rates across the fault indicates possible strain accumulation during the last 2000 years.

  8. Geomechanical Risk Assessment on Shear Activation of Faults in the CO2 Storage Test Site, Offshore Pohang, South Korea

    NASA Astrophysics Data System (ADS)

    Jo, Y.; Chang, C.; Shinn, Y. J.; Song, I.; Kwon, Y. K.

    2015-12-01

    A pilot CO2 sequestration test project is underway in offshore Pohang, South Korea. The target brine aquifer for CO2 storage is 100 m-thick sandstone/conglomerate formations at a depth range between 750 and 850 mbsf (meter below seafloor), which were verified by a 3D seismic survey and a cored borehole (980 m deep). We also found that a family of steep-dip, NE-striking faults cross the target aquifer. In order to analyze potential risk of shear activation along the faults, we characterize in situ stress state at the site. Borehole image logs, generated by an acoustic televiewer tool showed borehole breakouts along the whole logged section to ~705 mbsf, which consistently indicate an average maximum horizontal principal stress (SHmax) direction of N135°±15°E. A leak-off test conducted at the bottom of a casing shoe (700 mbsf) yielded the magnitude of the minimum horizontal principal stress (Shmin) of 12.1 MPa, which is lower than the vertical stress (Sv =14.8 MPa). For the given Shmin and Sv conditions, we used the logged breakout widths and laboratory determined rock compressive strength to constrain possible SHmax magnitudes that could create the observed breakouts. Our stress estimation indicates that the stress regime in the CO2 injection test site is in favor of strike-slip faulting (Shmin < Sv < SHmax). We utilized our estimated stress conditions to analyze slip tendency of the faults. All regional-scale faults turn out to have relatively low slip tendency under the given stress condition, suggesting a low risk of triggering shear activation of faults during CO2 injection.

  9. Spatial and temporal variation of palaeoseismic activity at an intraplate, historically quiescent structure: The Concud fault (Iberian Chain, Spain)

    NASA Astrophysics Data System (ADS)

    Lafuente, Paloma; Arlegui, Luis E.; Liesa, Carlos L.; Pueyo, Óscar; Simón, José L.

    2014-09-01

    Several faults in the Teruel and Jiloca grabens (Iberian Chain, NE Spain), particularly the targeted Concud fault, show evidences of recent, continuous activity, despite their scarce instrumental and historic seismic record. Three trenches are studied in two locations (central and southeastern sectors of the Concud fault, respectively). After comparing with previous works, we reconstruct a palaeoseismic succession with nine events distributed along a maximum time lapse bracketed between 81.6 and 14.0 ka. This succession involves an average recurrence interval of 7.4 ± 2.8 ka, with individual interseismic periods between 4 and 11 ka. The calculated coseismic displacements range from 0.6 to 2.7 m, with an average value of 1.9 m that results in a slip rate of 0.26 mm/a. Due to the incomplete sedimentary record for Holocene times, we cannot affirm that the youngest event detected was actually the last one. We conjecture that some other events may have occurred during the period between 15.0 and 3.4 ka. Temporal and spatial variations have been detected in palaeoseismic activity, specifically in the distribution of coseismic displacements. First, a non-steady slip rate is evidenced during Plio-Pleistocene times: a long-term tendency towards increasing slip rate is modulated in detail by the occurrence of minor cycles, as the sequence of increasing/decreasing activity recorded within the studied time window suggests. Secondly, an asymmetric distribution of coseismic slip along the fault trace is observed, paralleling the distribution of total fault throw, which shows an absolute maximum close to the southeastern tip. A combination of factors is proposed to explain this: branching of the main fault; dominant, remote-stress-driven slip towards N 220° E on the NW-SE fault segment; guided movement on the passive, NNW-SSE segment giving rise to an oblique roll-over monocline; and decoupling of the hanging-wall block owing to the transverse Los Mansuetos-Valdecebro fault

  10. Early Proterozoic activity on Archean faults in the western Superior province - evidence from pseudotachylite

    USGS Publications Warehouse

    Peterman, Z.E.; Day, W.

    1989-01-01

    Major transcurrent faults in the Superior province developed in the Late Archean at the close of the Kenoran orogeny. Reactivation of some of these faults late in the Early Proterozoic is indicated by Rb-Sr analyses of pseudotachylite from the Rainy Lake-Seine River and Quetico faults in the Rainy Lake region of Minnesota and Ontario. Fault veins of pseudotachylite and immediately adjacent country rock at two localities yielded subparallel isochrons that are pooled for an age of 1947??23 Ma. K-Ar and Rb-Sr biotite ages register earlier regional cooling of the terrane at about 2500 Ma with no evidence of younger thermal overprinting at temperatures exceeding 300??C. Accordingly, the 1947??23 Ma age is interpreted as dating the formation of the pseudotachylite. Reactivation of existing faults at this time was caused by stresses transmitted from margins of the Superior province where compressional tectonic events were occurring. -Authors

  11. Detection of active faults using EMR-Technique and Cerescope at Landau area in central Upper Rhine Graben, SW Germany

    NASA Astrophysics Data System (ADS)

    Hagag, Wael; Obermeyer, Hennes

    2016-01-01

    Two conjugate sets of active faults oriented NNE-SSW and NNW-SSE have been detected at Landau area in SW Germany. These faults follow the old trends of the rift-related structures predominating in the Upper Rhine Graben (URG), which originated during Late Eocene-Miocene time. Linear and horizontal measurements were performed by using the Cerescope device and interpreted, applying the Electromagnetic Radiation (EMR) Technique. Linear EMR-profiles were helpful for mapping active faults, while the main horizontal stress (σH, N to NNE) was easily identified with EMR-horizontal measurements. Reactivation of rift-related structures of the Upper Rhine Graben at Landau area produces a new system of active shallow fractures following old trends, and has been detected through the present study by Cerescope applying the EMR-Technique. The present results imply that the Enhanced Geothermal System (EGS) to the south of Landau has a great impact on reactivation of the pre-existing rift-related faults by mechanical hydro-fracturing occurring within the reservoir rocks underneath the area.

  12. High-resolution relocation of aftershocks of the Mw 7.1 Darfield, New Zealand, earthquake and implications for fault activity

    NASA Astrophysics Data System (ADS)

    Syracuse, E. M.; Thurber, C. H.; Rawles, C. J.; Savage, M. K.; Bannister, S.

    2013-08-01

    Low-slip-rate regions often represent under-recognized hazards, and understanding the progression of seismicity when faults in such areas rupture will help us to better understand earthquake rupture patterns. The 3 September 2010 (UTC) Mw 7.1 Darfield earthquake revealed a formerly unrecognized set of faults in the Canterbury region of New Zealand, an area that had previously been mapped as one of the lower-hazard areas in the country. In this study, we analyze the first four months of its aftershock sequence to identify active faults and temporal changes in seismicity along them. We jointly invert for three-dimensional P wave and S wave velocities and hypocentral locations, using data for 2840 aftershocks recorded at 36 temporary and permanent seismic stations within 70 km of the main shock epicenter. These relocations delineate eight individual faults active prior to the 22 February 2011 Mw 6.3 Christchurch earthquake, the largest aftershock of the Darfield earthquake. Two of these faults are in the Christchurch region, one of which corresponds to geodetically determined rupture planes of the Christchurch earthquake. Using focal mechanisms calculated from first-motion polarities, we find mainly strike-slip faulting events, with some reverse and normal faulting events as well. We compare the orientations of these faults to the prevailing regional stress directions to identify which faults may have been active prior to the Darfield earthquake and which may be newly developed.

  13. Time constraints on faults activity in the Eastern California Shear Zone from U-Pb (SHRIMP-RG) dating of syntectonic opal

    NASA Astrophysics Data System (ADS)

    Nuriel, P.; Maher, K.; Miller, D. M.

    2013-12-01

    Absolute time constraints for fault activity are of fundamental importance in active fault systems. Such constraints are necessary for estimation of long-term slip-rates and earthquake recurrence intervals required for seismic-hazard assessments. Notwithstanding, paleoseismological records are often limited to the past 1 Ma, and important information such as fault initiation and early stage displacement are seldom determined. Here we present a novel methodological approach for direct dating of brittle deformation events over a geological time scale. We use in situ U-Pb SHRIMP-RG (Sensitive High Resolution Ion Microprobe - Reverse Geometry) analyses of opal precipitates in order to constrain the relative and absolute timing of brittle deformation events. The Mojave Desert fault segments within the Eastern California Shear Zone (ECSZ) are ideal faults to investigate the long-term history because of the need for improved constraints on the timing of fault initiation and the observed discrepancy between long-term and short-term estimates for strain accumulation rates in this area. We analyzed fault-related opal samples from ten different fault exposures within the Camp Rock, Cave Mountain, and the Cady fault systems. Millimeter size fragments of fault-related opal, occurring as fault coating, filling or fault-breccia cement, were imaged using cathodoluminescence and backscattering electron microscopy in order to identify distinct phases of opal associated with specific syntectonic microstructures. Sub-samples within each phase are then targeted with multiple SHRIMP-RG analyses (<50 μm in diameter) to allow the construction of 238U/208Pb-206Pb/208Pb and/or Tera-Wasserburg U-Pb isochrons. Of the 50 distinct phases that were identified, 20 were successfully dated and U-Pb age results range from 8.4 to 0.58 Ma. The timing of fault initiation along the Cave Mountain Fault system was previously estimated to be between 15 Ma and 5 Ma. Our results suggest that initial

  14. An automatic continuous monitoring station for groundwater geochemistry at an active fault zone in SW Taiwan

    NASA Astrophysics Data System (ADS)

    Lai, Chun-Wei; Yang, Tsanyao F.; Fu, Ching-Chou; Hilton, David R.; Liu, Tsung-Kwei; Walia, Vivek; Lai, Tzu-Hua

    2015-04-01

    Previous studies have revealed that gas compositions of fluid samples collected from southwestern Taiwan where many hot springs and mud volcanoes are distributed along tectonic sutures show significant variation prior to and after some disaster seismic events. Such variations, including radon activity, CH4/CO2, CO2/3He and 3He/4He ratios of gas compositions, are considered to be precursors of earthquakes in this area. To validate the relationship between fluid compositions and local earthquakes, a continuous monitoring station has been established at Yun-Shui, which is an artesian well located at an active fault zone in SW Taiwan. It is equipped with a radon detector and a quadrupole mass spectrometer (QMS) for in-situ measurement of the dissolved gas composition. Data is telemetered to Taipei so we are able to monitor variations of gas composition in real time. Furthermore, we also installed a syringe pump apparatus for the retrieval and temporal analysis of helium (SPARTAH) at this station. From the SPARTAH samples, we can obtain detailed time series records of H-O isotopic compositions, DIC concentration and δ13C isotopic ratios, and anion concentration of the water samples at this station. After continuous monitoring for about one year, some anomalies occurred prior to some local earthquakes. It demonstrates that this automated system is feasible for long-term continuous seismo-geochemical research in this area. Keywords: monitoring; geochemistry; isotope; dissolved gases; pre-seismic signal.

  15. Multiscale seismic imaging of active fault zones for hazard assessment: A case study of the Santa Monica fault zone, Los Angeles, California

    USGS Publications Warehouse

    Pratt, T.L.; Dolan, J.F.; Odum, J.K.; Stephenson, W.J.; Williams, R.A.; Templeton, M.E.

    1998-01-01

    High-resolution seismic reflection profiles at two different scales were acquired across the transpressional Santa Monica Fault of north Los Angeles as part of an integrated hazard assessment of the fault. The seismic data confirm the location of the fault and related shallow faulting seen in a trench to deeper structures known from regional studies. The trench shows a series of near-vertical strike-slip faults beneath a topographic scarp inferred to be caused by thrusting on the Santa Monica fault. Analysis of the disruption of soil horizons in the trench indicates multiple earthquakes have occurred on these strike-slip faults within the past 50 000 years, with the latest being 1000 to 3000 years ago. A 3.8-km-long, high-resolution seismic reflection profile shows reflector truncations that constrain the shallow portion of the Santa Monica Fault (upper 300 m) to dip northward between 30?? and 55??, most likely 30?? to 35??, in contrast to the 60?? to 70?? dip interpreted for the deeper portion of the fault. Prominent, nearly continuous reflectors on the profile are interpreted to be the erosional unconformity between the 1.2 Ma and older Pico Formation and the base of alluvial fan deposits. The unconformity lies at depths of 30-60 m north of the fault and 110-130 m south of the fault, with about 100 m of vertical displacement (180 m of dip-slip motion on a 30??-35?? dipping fault) across the fault since deposition of the upper Pico Formation. The continuity of the unconformity on the seismic profile constrains the fault to lie in a relatively narrow (50 m) zone, and to project to the surface beneath Ohio Avenue immediately south of the trench. A very high-resolution seismic profile adjacent to the trench images reflectors in the 15 to 60 m depth range that are arched slightly by folding just north of the fault. A disrupted zone on the profile beneath the south end of the trench is interpreted as being caused by the deeper portions of the trenched strike

  16. Imaging active faults in a region of distributed deformation from joint focal mechanism and hypocenter clustering: Application to western Iberia

    NASA Astrophysics Data System (ADS)

    Custodio, S.; Lima, V.; Vales, D.; Carrilho, F.; Cesca, S.

    2015-12-01

    Mainland Portugal, on the SW edge of the European continent, is located directly north of the boundary between the Eurasian and Nubian plates. It lies in a region of slow lithospheric deformation, which has generated some of the largest earthquakes in Europe, both intraplate (mainland) and interplate (offshore). The seismicity of mainland Portugal and its adjacent offshore has been repeatedly classified as diffuse. We analyse the instrumental earthquake catalog for western Iberia, enriched with data from recent dense broadband deployments. We show that although the plate boundary south of Portugal is diffuse, in that deformation is accommodated along several distributed faults rather than along one long linear plate boundary, the seismicity itself is not diffuse. Rather, when located using high quality data, earthquakes collapse into well-defined clusters and lineations. We then present a new joint focal mechanism and hypocenter cluster algorithm that is able to extract coherent information between hypocenter locations and focal mechanisms. We apply the method to the Azores-western Mediterranean region, with emphasis on western Iberia. In addition to identifying well-known seismo-tectonic features, the joint clustering algorithm identifies eight new clusters of earthquakes with a good match between the directions of epicentre lineations and focal mechanism fault planes. These clusters may signal single active faults or wider fault zones accommodating a consistent type of faulting. Mainland Portugal is dominated by strike-slip faulting, consistent with the NNE-SSW and WNW-ESE oriented lineations. The region offshore SW Iberia displays clusters that are either predominantly strike-slip or reverse, indicating slip partitioning. This work shows that the study of low-magnitude earthquakes using dense seismic deployments is a powerful tool to study lithospheric deformation in slowly deforming regions, where high-magnitude earthquakes occur with long recurrence intervals.

  17. Active faulting within a megacity: the geometry and slip rate of the Pardisan thrust in central Tehran, Iran

    NASA Astrophysics Data System (ADS)

    Talebian, M.; Copley, A. C.; Fattahi, M.; Ghoraishi, M.; Jackson, J. A.; Nazari, H.; Sloan, R. A.; Walker, R. T.

    2016-09-01

    Tehran, the capital city of Iran with a population of over 12 million, is one of the largest urban centres within the seismically active Alpine-Himalayan orogenic belt. Although several historic earthquakes have affected Tehran, their relation to individual faults is ambiguous for most. This ambiguity is partly due to a lack of knowledge about the locations, geometries, and seismic potential of structures that have been obscured by dramatic urban growth over the past three decades, and which have covered most of the young geomorphic markers and natural exposures. Here we use aerial photographs from 1956, combined with an ˜1 m DEM derived from stereo Pleiades satellite imagery, to investigate the geomorphology of a growing anticline above a thrust fault - the Pardisan thrust - within central Tehran. The topography across the ridge is consistent with a steep ramp extending from close to the surface to a depth of ˜2 km, where it presumably connects with a shallow-dipping detachment. No primary fault is visible at the surface, and it is possible that the faulting dissipates in the near surface as distributed shearing. We use optically-stimulated luminescence to date remnants of uplifted and warped alluvial deposits that are offset vertically across the Pardisan fault, providing minimum uplift and slip-rates of at least 1 mm/yr. Our study shows that the faults within the Tehran urban region have relatively rapid rates of slip, are important in the regional tectonics, and have a great impact on earthquake hazard assessment of the city and surrounding region.

  18. Block-like motion of Tibetan Plateau: Evidences from active faults , GPS velocities and recent earthquake slips

    NASA Astrophysics Data System (ADS)

    Xu, X.; Cheng, J.

    2012-12-01

    continuous models have been proposed to explain GPS observations in many active regions. Here we first describe a division of active blocks in the Tibetan plateau and its adjacent regions in detail from recently published and unpublished maps showing distribution of active faults, discuss basic features of boundary faults around the blocks, block-like motions and their interior deformation patterns in the Quaternary. Then we examine present-day vectors and mechanical parameters of the active blocks both from the GPS observations and recent earthquake slips. All these analyses demonstrate that the block-like motion prevail in the Tibetan Plateau.

  19. Surface evidence of active tectonics along the Pergola-Melandro fault: A critical issue for the seismogenic potential of the southern Apennines, Italy

    NASA Astrophysics Data System (ADS)

    Moro, Marco; Amicucci, Laura; Cinti, Francesca R.; Doumaz, Fawzi; Montone, Paola; Pierdominici, Simona; Saroli, Michele; Stramondo, Salvatore; Di Fiore, Boris

    2007-08-01

    The Pergola-Melandro basin (southern Apennines) is characterized by a below-average release of seismic energy within a wider earthquake-prone region. In fact, it is placed between the maximum intensity areas of two of the most destructive earthquakes reported in the Italian seismic catalogue: the M ≥ 7.0 Agri Valley earthquake in 1857 and the Ms = 6.9 Irpinia earthquake in 1980. In this work, we present geomorphologic analysis, electrical resistivity surveys and field data, including paleoseismologic evidence, that provided the first direct constraints on the presence of a ˜20 km long, seismogenic fault at the western border of the Pergola-Melandro basin. We also obtained geological information on the recent deformation history of the Pergola-Melandro fault that indicates the occurrence of at least four surface faulting earthquakes since Late Pleistocene age. The empirical relationships linking fault length and magnitude would assign to the Pergola-Melandro fault an event of M ≥ 6.5. These new data have important implication on the seismic hazard assessment of this sector of the Apennines, that also includes large cities such as Potenza, about 20 km far from the recognized Pergola-Melandro fault, and highlight the relevance of the geological approach in areas where the seismological records are poor. Finally, we discuss the Pergola-Melandro fault within the regional seismotectonic context. In particular, this fault belongs to the system of normal faults with an apenninic orientation, both NE and SW dipping, accommodating the NE-crustal extension taking place in the area. Nearby faults, similarly oriented but with opposite dip, may coexist whether linked by secondary faults that act as slip transfer structures. This complex system of active faults would be more realistic than a narrow band of faults running along the belt axis with an homogenous geometry, and moreover, it is more consistent with the high extension rate measured by historical earthquakes and

  20. Discovery of an Active Submarine Mud Volcano Along the Nootka Fault West of Vancouver Island

    NASA Astrophysics Data System (ADS)

    Riedel, M.; Riedel, M.; Kelly, D. S.; Delaney, J. R.; Spence, G. D.; Hyndman, R. D.; Hyndman, R. D.; Mayer, L.; Calder, B.; Lilley, M. D.; Olson, E. O.; Schrenk, M. O.; Coffin, R.

    2001-12-01

    Submarine mud volcanoes are a common feature in margin environments, but few of them have been documented in the Northeast Pacific. However, during a Hydrosweep bathymetric survey in July, 2001, and a follow-on sub-surface seismic survey in August two mud volcanoes were imaged along the Nootka Fault, 16-18 km west of Vancouver Island at a water depth of 2500 m. The southern volcano, called Maquinna, lies directly along the southern expression of the left lateral, strike slip Nootka Fault. It is 1.5 km across, has a breached caldera and two small summit craters, and it stands about 30 m above the seafloor. The base is bounded by a narrow moat, partially filled by Holocene sediments that are flat lying; older, underlying sediments show steep downwarping towards the sides of the volcano. Subsurface imaging shows a dramatic loss of reflectivity beneath the volcano mound, which may indicate significant mobilization of material. However, a very bright reflector is seen at about 400 m depth below the volcano. This reflector is too deep for stability of methane clathrate, and is interpreted as a zone of high fluid content. A CTD vertical cast above the summit of the volcano showed strong, co-registered thermal, particulate, and oxygen anomalies that extend 50 m up into the overlying water column. These data indicate that the volcano is actively venting warm hydrothermal fluids. The fluids are depleted in CO2, contain background concentrations of CH4, but show elevated H2 concentrations above ocean background water. Microscopic examination of the Nootka hydrothermal samples shows that they contain dense and morphologically diverse microbial communities in comparison to background seawater with cell densities of 106 cells/ml. Enrichment culturing indicates that these communities include both anaerobic and aerobic organisms, some of which are thermophilic with optimal growth temperatures in excess of 50 deg C. Some of these cultures can use methane oxidation as an energy

  1. A Toolkit for Active Object-Oriented Databases with Application to Interoperability

    NASA Technical Reports Server (NTRS)

    King, Roger

    1996-01-01

    In our original proposal we stated that our research would 'develop a novel technology that provides a foundation for collaborative information processing.' The essential ingredient of this technology is the notion of 'deltas,' which are first-class values representing collections of proposed updates to a database. The Heraclitus framework provides a variety of algebraic operators for building up, combining, inspecting, and comparing deltas. Deltas can be directly applied to the database to yield a new state, or used 'hypothetically' in queries against the state that would arise if the delta were applied. The central point here is that the step of elevating deltas to 'first-class' citizens in database programming languages will yield tremendous leverage on the problem of supporting updates in collaborative information processing. In short, our original intention was to develop the theoretical and practical foundation for a technology based on deltas in an object- oriented database context, develop a toolkit for active object-oriented databases, and apply this toward collaborative information processing.

  2. A Toolkit for Active Object-Oriented Databases with Application to Interoperability

    NASA Technical Reports Server (NTRS)

    King, Roger

    1996-01-01

    In our original proposal we stated that our research would 'develop a novel technology that provides a foundation for collaborative information processing.' The essential ingredient of this technology is the notion of 'deltas,' which are first-class values representing collections of proposed updates to a database. The Heraclitus framework provides a variety of algebraic operators for building up, combining, inspecting, and comparing deltas. Deltas can be directly applied to the database to yield a new state, or used 'hypothetically' in queries against the state that would arise if the delta were applied. The central point here is that the step of elevating deltas to 'first-class' citizens in database programming languages will yield tremendous leverage on the problem of supporting updates in collaborative information processing. In short, our original intention was to develop the theoretical and practical foundation for a technology based on deltas in an object-oriented database context, develop a toolkit for active object-oriented databases, and apply this toward collaborative information processing.

  3. Coseismic Faulting and Folding in an Active Thrust Sheet over Multiple Rupture Cycles Resolved by Integrating Surface and Subsurface Records of Earthquake Deformation

    NASA Astrophysics Data System (ADS)

    Stockmeyer, J. M.; Shaw, J. H.; Brown, N.; Rhodes, E. J.; Wang, M.; Lavin, L. C.; Guan, S.

    2015-12-01

    Many recent thrust fault earthquakes have involved coseismic surface faulting and folding, revealing the complex nature of surface deformation in active thrust sheets. In this study, we characterize deformation along the active Southern Junggar Thrust (SJT) in the Junggar basin, NW China - which sourced the 1906 M8 Manas earthquake - to gain insight into how fault slip at depth is partitioned between faulting and folding strains at Earth's surface by integrating deformed terrace records, subsurface geophysical data, and luminescence geochronology. Using a 1-m digital elevation model and field surveys, we have mapped the precise geometries of fluvial terraces across the entire Tugulu anticline, which lies in the hanging wall of the SJT. These profiles reveal progressive uplift of several terraces along prominent fault scarps where the SJT is surface-emergent. Similarly aged terraces are folded in the backlimb of the Tugulu fold, providing a sequential record of surface folding. These folded terraces are progressively rotated such that the oldest terraces are dipping much steeper than younger terraces within the same fold limb. Using 2- and 3-D seismic reflection data, we integrate subsurface deformation constraints with records of surface strain. Structural interpretations of these seismic data define the geometry of the SJT and reveal that folding is localized across synclinal bends along the SJT. We evaluate a range of distinct fault-related fold models (e.g. fault-bend folding, shear fault-bend folding) to assess which structural style best describes the geometries of the subsurface and surface fold patterns. By doing so, we have the opportunity to directly relate surface fault slip measures from terrace folding and uplift to total fault slip at depth. This integration of surface and subsurface deformation - combined with constraints on terrace ages from post-IR IRSL geochronology - allows us to characterize how fault slip and seismic moment are partitioned

  4. Identifying buried segments of active faults in the northern Rio Grande Rift using aeromagnetic, LiDAR,and gravity data, south-central Colorado, USA

    USGS Publications Warehouse

    Ruleman, Cal; Grauch, V. J.

    2013-01-01

    Combined interpretation of aeromagnetic and LiDAR data builds on the strength of the aeromagnetic method to locate normal faults with significant offset under cover and the strength of LiDAR interpretation to identify the age and sense of motion of faults. Each data set helps resolve ambiguities in interpreting the other. In addition, gravity data can be used to infer the sense of motion for totally buried faults inferred solely from aeromagnetic data. Combined interpretation to identify active faults at the northern end of the San Luis Basin of the northern Rio Grande rift has confirmed general aspects of previous geologic mapping but has also provided significant improvements. The interpretation revises and extends mapped fault traces, confirms tectonic versus fluvial origins of steep stream banks, and gains additional information on the nature of active and potentially active partially and totally buried faults. Detailed morphology of surfaces mapped from the LiDAR data helps constrain ages of the faults that displace the deposits. The aeromagnetic data provide additional information about their extents in between discontinuous scarps and suggest that several totally buried, potentially active faults are present on both sides of the valley.

  5. Active tectonic deformation along rejuvenated faults in tropical Borneo: Inferences obtained from tectono-geomorphic evaluation

    NASA Astrophysics Data System (ADS)

    Mathew, Manoj Joseph; Menier, David; Siddiqui, Numair; Kumar, Shashi Gaurav; Authemayou, Christine

    2016-08-01

    active folding of the Rajang Group fold-thrust belt to present and these events reactivated old major faults and minor related dislocations. From geomorphic analysis associated with sedimentary record, we posit that the terrain could have undergone high uplift rates since 5 Ma or multi-phased uplift with periodic intermittent pulses of high and low uplift rates.

  6. A Sensor Fault Detection Methodology applied to Piezoelectric Active Systems in Structural Health Monitoring Applications

    NASA Astrophysics Data System (ADS)

    Tibaduiza, D.; Anaya, M.; Forero, E.; Castro, R.; Pozo, F.

    2016-07-01

    Damage detection is the basis of the damage identification task in Structural Health Monitoring. A good damage detection process can ensure the adequate work of a SHM System because allows to know early information about the presence of a damage in a structure under evaluation. However this process is based on the premise that all sensors are well installed and they are working properly, however, it is not true all the time. Problems such as debonding, cuts and the use of the sensors under different environmental and operational conditions result in changes in the vibrational response and a bad functioning in the SHM system. As a contribution to evaluate the state of the sensors in a SHM system, this paper describes a methodology for sensor fault detection in a piezoelectric active system. The methodology involves the use of PCA for multivariate analysis and some damage indices as pattern recognition technique and is tested in a blade from a wind turbine where different scenarios are evaluated including sensor cuts and debonding.

  7. Abnormal fault-recovery characteristics of the fault-tolerant multiprocessor uncovered using a new fault-injection methodology

    NASA Technical Reports Server (NTRS)

    Padilla, Peter A.

    1991-01-01

    An investigation was made in AIRLAB of the fault handling performance of the Fault Tolerant MultiProcessor (FTMP). Fault handling errors detected during fault injection experiments were characterized. In these fault injection experiments, the FTMP disabled a working unit instead of the faulted unit once in every 500 faults, on the average. System design weaknesses allow active faults to exercise a part of the fault management software that handles Byzantine or lying faults. Byzantine faults behave such that the faulted unit points to a working unit as the source of errors. The design's problems involve: (1) the design and interface between the simplex error detection hardware and the error processing software, (2) the functional capabilities of the FTMP system bus, and (3) the communication requirements of a multiprocessor architecture. These weak areas in the FTMP's design increase the probability that, for any hardware fault, a good line replacement unit (LRU) is mistakenly disabled by the fault management software.

  8. Abnormal fault-recovery characteristics of the fault-tolerant multiprocessor uncovered using a new fault-injection methodology

    NASA Astrophysics Data System (ADS)

    Padilla, Peter A.

    1991-03-01

    An investigation was made in AIRLAB of the fault handling performance of the Fault Tolerant MultiProcessor (FTMP). Fault handling errors detected during fault injection experiments were characterized. In these fault injection experiments, the FTMP disabled a working unit instead of the faulted unit once in every 500 faults, on the average. System design weaknesses allow active faults to exercise a part of the fault management software that handles Byzantine or lying faults. Byzantine faults behave such that the faulted unit points to a working unit as the source of errors. The design's problems involve: (1) the design and interface between the simplex error detection hardware and the error processing software, (2) the functional capabilities of the FTMP system bus, and (3) the communication requirements of a multiprocessor architecture. These weak areas in the FTMP's design increase the probability that, for any hardware fault, a good line replacement unit (LRU) is mistakenly disabled by the fault management software.

  9. Detailed velocity ratio mapping during the aftershock sequence as a tool to monitor the fluid activity within the fault plane

    NASA Astrophysics Data System (ADS)

    Bachura, Martin; Fischer, Tomáš

    2016-11-01

    The rheological properties of Earth materials are expressed by their seismic velocities and VP /VS ratio, which is easily obtained by the Wadati method. Its double-difference version based on cross-correlated waveforms enables focusing on very local structures and allows tracking, monitoring and analysing the fluid activity along faults. We applied the method to three 2014 mainshock-aftershock sequences in the West Bohemia/Vogtland (Czech Republic) earthquake swarm area and found pronounced VP /VS variations in time and space for different clusters of events located on a steeply dipping fault zone at depths ranging from 7 to 11 km. Each cluster reflects the spatial distribution of earthquakes along the fault plane but also the temporal evolution of the activity. Low values of VP /VS ratio down to 1.59 ± 0.02 were identified in the deeper part of the fault zone whereas higher values up to 1.73 ± 0.01 were estimated for clusters located on a shallower segment of the fault. Temporally the low VP /VS values are associated with the early aftershocks, while the higher VP /VS ratios are related only to later aftershocks. We interpret this behaviour as a result of saturation of the focal zone by compressible fluids: in the beginning the mainshock and early aftershocks driven by over-pressured fluids increased the porosity due to opening the fluid pathways. This process was associated with a decrease of the velocity ratio. In later stages the pressure and porosity decreased and the velocity ratio recovered to levels of 1.73, typical for a Poissonian medium and Earth's crust.

  10. LiDAR-Assisted identification of an active fault near Truckee, California

    USGS Publications Warehouse

    Hunter, L.E.; Howle, J.F.; Rose, R.S.; Bawden, G.W.

    2011-01-01

    We use high-resolution (1.5-2.4 points/m2) bare-earth airborne Light Detection and Ranging (LiDAR) imagery to identify, map, constrain, and visualize fault-related geomorphology in densely vegetated terrain surrounding Martis Creek Dam near Truckee, California. Bare-earth LiDAR imagery reveals a previously unrecognized and apparently youthful right-lateral strike-slip fault that exhibits laterally continuous tectonic geomorphic features over a 35-km-long zone. If these interpretations are correct, the fault, herein named the Polaris fault, may represent a significant seismic hazard to the greater Truckee-Lake Tahoe and Reno-Carson City regions. Three-dimensional modeling of an offset late Quaternary terrace riser indicates a minimum tectonic slip rate of 0.4 ?? 0.1 mm/yr.Mapped fault patterns are fairly typical of regional patterns elsewhere in the northern Walker Lane and are in strong coherence with moderate magnitude historical seismicity of the immediate area, as well as the current regional stress regime. Based on a range of surface-rupture lengths and depths to the base of the seismogenic zone, we estimate a maximum earthquake magnitude (M) for the Polaris fault to be between 6.4 and 6.9.

  11. Dynamic fracturing by successive coseismic loadings leads to pulverization in active fault zones

    NASA Astrophysics Data System (ADS)

    Aben, F. M.; Doan, M.-L.; Mitchell, T. M.; Toussaint, R.; Reuschlé, T.; Fondriest, M.; Gratier, J.-P.; Renard, F.

    2016-04-01

    Previous studies show that pulverized rocks observed along large faults can be created by single high-strain rate loadings in the laboratory, provided that the strain rate is higher than a certain pulverization threshold. Such loadings are analogous to large seismic events. In reality, pulverized rocks have been subject to numerous seismic events rather than one single event. Therefore, the effect of successive "milder" high-strain rate loadings on the pulverization threshold is investigated by applying loading conditions below the initial pulverization threshold. Single and successive loading experiments were performed on quartz-monzonite using a Split Hopkinson Pressure Bar apparatus. Damage-dependent petrophysical properties and elastic moduli were monitored by applying incremental strains. Furthermore, it is shown that the pulverization threshold can be reduced by successive "milder" dynamic loadings from strain rates of ~180 s-1 to ~90 s-1. To do so, it is imperative that the rock experiences dynamic fracturing during the successive loadings prior to pulverization. Combined with loading conditions during an earthquake rupture event, the following generalized fault damage zone structure perpendicular to the fault will develop: furthest from the fault plane, there is a stationary outer boundary that bounds a zone of dynamically fractured rocks. Closer to the fault, a pulverization boundary delimits a band of pulverized rock. Consecutive seismic events will cause progressive broadening of the band of pulverized rocks, eventually creating a wider damage zone observed in mature faults.

  12. Late Pleistocene-Holocene Faulting History Along the Northern El Carrizal Fault, Baja California Sur, Mexico: Earthquake Recurrence at a Persistently Active Rifted Margin

    NASA Astrophysics Data System (ADS)

    Maloney, S. J.; Umhoefer, P. J.; Arrowsmith, J. R.; Gutiérrez, G. M.; Santillanez, A. U.; Rittenour, T. R.

    2007-12-01

    The El Carrizal fault is a NW striking, east dipping normal fault located 25 km west of the city of La Paz, Baja California Sur, Mexico and is the westernmost bounding fault of the gulf-margin system at this latitude. The fault is ~70 km long onshore and ~50 km long offshore to the north in La Paz Bay. As many as three Quaternary geomorphic surfaces formed on the footwall and were identified on the basis of mapping and topographic profiling. In the north, the El Carrizal fault splays into multiple strands and exhibits a pattern of alternating N-S and NW-trending segments. Results from geologic mapping, paleoseismic investigations, and preliminary optically stimulated luminescence (OSL) geochronology provide some of the first numerical constraints on late Pleistocene-Holocene faulting along the El Carrizal fault. A 20 m long, 2-3 m deep trench (Trench 28) was excavated across the fault 23 km south of La Paz Bay. The trench was photographed, hand logged, and sampled for OSL dating. The trench revealed a succession of fluvial and channel deposits of sands, gravels, and cobbles. The main fault zone is manifested by a 0.5 m thick wedge-shaped deposit that consists of silty-sand and also contains rotated blocks of caliche- cemented gravels. Preliminary OSL ages from a silty-sand unit offset 2 m by the fault average latest Pleistocene. A trench 4 km south of Trench 28 (Cuadradito Trench) was also documented and sampled for OSL analysis. Preliminary OSL ages from a fluvial sand unit deposited against faulted bedrock range from mid to late Holocene. Sedimentary comparisons and surficial mapping suggest that the Holocene unit at Cuadradito Trench may be correlative to sediment that overlies faulted units from Trench 28. Such a correlation would constrain the timing of the 2 m offset at Trench 28 to be between latest Pleistocene and mid Holocene. A quarry 10 km north of Trench 28 exposes Quaternary sand and gravels buttressed against a 5-10 m wide bedrock shear zone. Here

  13. Study and comparison of the maximum stress directions and main fault orientations in some active zones in Iran

    NASA Astrophysics Data System (ADS)

    Forouhid, Khatereh; Faraji, Atefeh; Ghorashi, Manouchehr

    2010-05-01

    Study and comparison of the maximum stress directions and main fault orientations in some active zones in Iran Khatereh Forouhid, Manouchehr Ghorashi, Atefeh Faraji Institute of Geophysics, Tehran University, Tehran, Iran kforouhid@yahoo.com Farajiatefeh@yahoo.com The Iranian plateau is the widest active zone in Alpine-Himalayan collision system that is located between two stable platforms, the Arabia in southwest and Eurasia in northeast. The convergence of these two platforms towards each other is the main reason for seismicity and different styles of deformation observed in Iran. In this study, the Iranian plateau is divided into 7 regions based on their seismotectonic characteristics. These regions are; Zagros, Makran, East Iran, Alborz, Kopeh Dagh, Central Iran and Azarbayejan (northwest of Iran). In each region, focal mechanism solutions of early and modern instrumental earthquakes (the only source of information suitable to use for stress distribution study in Iran) with magnitudes more than 5.0 and their relations to active faults are considered. By studying each maximum stress direction based on a group of earthquake focal mechanisms and considering main fault orientations, each region is studied individually. According to these data, some of these regions are divided into smaller parts. These sub-divided parts have some characters that make them different from their neighbors in the same region. In this regard, Zagros is studied in detail based on seismotectonic characteristics and divided into three parts, with N-S maximum stress direction (compressional) in one part and two different kind of NE-SW direction in two other. We use this information to investigate the style and distribution of active faulting in the Zagros and the relationships of this activity with shortening of the Arabia-Eurasia collision. It is worth to mention that as the fault slip will almost occur in the direction of maximum resolved shear stress on the fault plane, probably strain

  14. Active faulting and deformation of the Coalinga anticline as interpreted from three-dimensional velocity structure and seismicity

    USGS Publications Warehouse

    Eberhart-Phillips, D.

    1989-01-01

    This work gives a clear picture of the geometry of aftershock seismicity in a large thrust earthquake. Interpretation of hypocenters and fault plane solutions, from the 1983 Coalinga, Coast Range California, earthquake sequence, in combination with the three-dimensional velocity structure shows that the active faulting beneath the fold primarily consists of a set of southwest dipping thrusts uplifting blocks of higher-velocity material. With the three-dimensional velocity model each individual hypocenter moved slightly (0-2km) in accord with the details of the surrounding velocity structure, so that secondary features in the seismicity pattern are more detailed than with a local one-dimensional model and station corrections. The overall character of the fault plane solutions was not altered by the three-dimensional model, but the more accurate ray paths did result in distinct changes. In particular, the mainshock has a fault plane dipping 30?? southwest instead of the 23?? obtained with the one-dimensional model. -from Author

  15. Late Quaternary Activity and Seismogenic Potential of the Gonave microplate: South Coast Fault Zone of Southern Jamaica

    NASA Astrophysics Data System (ADS)

    Benford, B.; Mann, P.; Prentice, C.; King, W.; Wiggins-Grandison, M.; Demets, C.; Tikoff, B.

    2008-12-01

    The South Coast fault zone (SCFZ) strikes east-west and forms a scarp as high as 600 m along the southern coast of Jamaica. It has been postulated that this fault acts as a left-lateral, strike-slip 'bypass' fault that truncates the large, right-stepping restraining bend formed between the Plantain Garden fault zone of southeastern Jamaica and the Duanvale-Walton fault zone of northwestern Jamaica. GPS measurements near the SCFZ show anomalously rotated vectors consistent with active left-lateral shear. Anomalous topography along the trace of the SCFZ includes two, doubly plunging anticlines: Kemp's Hill (119 m), an isolated high in the otherwise flat Vere Plain, and Round Hill (333 m), a larger high directly adjacent to the coast. Field work identified the most active trace of the SCFZ in a notch along the north flank of Round Hill; this trace can be extrapolated to the west along the coast and east that locally defines a low scarp in alluvium. Channel profiles constructed for six rivers and streams crossing the projected trace of the SCFZ show convex-upward morphologies, consistent with dominance of tectonic uplift over river downcutting. To better define the subsurface location of the SCFZ beneath the Vere Plain, a gravity survey network consisting of 327 stations and covering an areas of 500 km2 was performed using a Lacoste and Romberg G-meter. Differential GPS allowed centimeter-level elevation control for each station. Gravity corrections (elevation, latitude, instrument drift, and earth tides) were made using QC Tool software, and topographic and terrane corrections were made using both local topographic measurements and high-resolution SRTM data. An ~20 mgal negative gravity anomaly on the otherwise flat gravity field of the Vere Plain corresponds with the projected trace of the SCFZ across the Vere Plain and the locations of one river offset. We interpret that the SCFZ has down-to-the-south throw, which has led to thickening of Quaternary sediments south

  16. Active flexural-slip faulting: A study from the Pamir-Tian Shan convergent zone, NW China

    NASA Astrophysics Data System (ADS)

    Li, Tao; Chen, Jie; Thompson, Jessica A.; Burbank, Douglas W.; Yang, Xiaodong

    2015-06-01

    The flexural-slip fault (FSF), a type of secondary fault generated by bed-parallel slip, occurs commonly and plays an important role in accommodating fold growth. Although the kinematics and mechanics of FSFs are well studied, relatively few field observations or geometric models explore its geomorphic expression. In the Pamir-Tian Shan convergent zone, NW China, suites of well-preserved FSF scarps displace fluvial terraces in the Mingyaole and Wulagen folds. Integrating interpretations of Google Earth images, detailed geologic and geomorphic mapping, and differential GPS measurements of terrace surfaces, we summarize geomorphic features that typify these faults and create kinematic models of active flexural-slip faulting. Our study indicates the following: (i) FSF scarps commonly occur near synclinal hinges, irrespective of whether (a) the dip direction of beds on either side of the hinge is unidirectional or in opposite directions, (b) the hinge is migrating or fixed, or (c) the hinge shape is narrow and angular or wide and curved. (ii) Active FSFs are likely to produce higher scarps on steeper beds, whereas lower or no topographic scarps typify gentler beds. (iii) Tilt angles of the terrace surface displaced above FSFs progressively decrease farther away from the hinge, with abrupt changes in slope coinciding with FSF scarps; the changes in tilt angle and scarp height have a predictable geometric relationship. (iv) Active FSFs can accommodate a significant fraction of total slip and play a significant role in folding deformation. (v) Active FSFs may be used to assess seismic hazards associated with active folds and associated blind thrusts.

  17. Active tectonics, paleoseismology and associated methodological challenges posed by the slow moving Alhama de Murcia fault (SE Iberia)

    NASA Astrophysics Data System (ADS)

    Ferrater, Marta; Ortuño, Maria; Masana, Eulàlia; Pallàs, Raimon; Perea, Hector; Baize, Stephane; García-Meléndez, Eduardo; Martínez-Díaz, José J.; Echeverria, Anna; Rockwell, Thomas; Sharp, Warren D.; Arrowsmith, Ramon; Medialdea, Alicia; Rhodes, Edward

    2016-04-01

    The Alhama de Murcia fault (AMF) is a 87 km-long left-lateral slow moving fault and is responsible for the 5.1 Mw 2011 Lorca earthquake. The characterization of the seismic potential of seismogenic strike-slip slow moving faults is necessary but raises huge methodological challenges, as most paleoseismological and active tectonic techniques have been designed on and for fast moving faults. The AMF is used here as a pilot study area to adapt the traditional geomorphological and trenching analyses, especially concerning the precise quantification of offset channels. We: 1) adapted methodologies to slow moving faults, 2) obtained, for the first time, the slip rate of the AMF, and 3) updated its recurrence period and maximum expected magnitude. Morphotectonic studies aim to use the measured tectonic offset of surface channels to calculate seismic parameters. However, these studies lack a standard criterion to score the analysed features. We improved this by differentiating between subjective and objective qualities, and determining up to three objective parameters (lithological changes, associated morphotectonics and shape, and three shape sub-parameters; all ranging from 0 to 1). By applying this methodology to the AMF, we identified and characterized 138 offset features that we mapped on a high-resolution (0.5 × 0.5 m pixel size) Digital Elevation Model (DEM) from a point cloud acquired in 2013 by airborne light detection and ranging (lidar). The identified offsets, together with the ongoing datings, are going to be used to calculate the lateral slip rate of the AMF. In three-dimensional trenches, we measured the offsets of a buried channel by projecting the far-field tendency of the channel onto the fault. This procedure is inspired by the widespread geomorphological procedure and aims to avoid the diffuse deformation in the fault zone associated with slow moving faults. The calculation of the 3D tendency of the channel and its projection onto the fault permitted

  18. Data-based fault-tolerant control of high-speed trains with traction/braking notch nonlinearities and actuator failures.

    PubMed

    Song, Qi; Song, Yong-Duan

    2011-12-01

    This paper investigates the position and velocity tracking control problem of high-speed trains with multiple vehicles connected through couplers. A dynamic model reflecting nonlinear and elastic impacts between adjacent vehicles as well as traction/braking nonlinearities and actuation faults is derived. Neuroadaptive fault-tolerant control algorithms are developed to account for various factors such as input nonlinearities, actuator failures, and uncertain impacts of in-train forces in the system simultaneously. The resultant control scheme is essentially independent of system model and is primarily data-driven because with the appropriate input-output data, the proposed control algorithms are capable of automatically generating the intermediate control parameters, neuro-weights, and the compensation signals, literally producing the traction/braking force based upon input and response data only--the whole process does not require precise information on system model or system parameter, nor human intervention. The effectiveness of the proposed approach is also confirmed through numerical simulations.

  19. Using non-local databases for the environmental assessment of industrial activities: The case of Latin America

    SciTech Connect

    Osses de Eicker, Margarita; Hischier, Roland; Hurni, Hans; Zah, Rainer

    2010-04-15

    Nine non-local databases were evaluated with respect to their suitability for the environmental assessment of industrial activities in Latin America. Three assessment methods were considered, namely Life Cycle Assessment (LCA), Environmental Impact Assessment (EIA) and air emission inventories. The analysis focused on data availability in the databases and the applicability of their international data to Latin American industry. The study showed that the European EMEP/EEA Guidebook and the U.S. EPA AP-42 database are the most suitable ones for air emission inventories, whereas the LCI database Ecoinvent is the most suitable one for LCA and EIA. Due to the data coverage in the databases, air emission inventories are easier to develop than LCA or EIA, which require more comprehensive information. One strategy to overcome the limitations of non-local databases for Latin American industry is the combination of validated data from international databases with newly developed local datasets.

  20. Modeling fault diagnosis as the activation and use of a frame system. [for pilot problem-solving rating

    NASA Technical Reports Server (NTRS)

    Smith, Philip J.; Giffin, Walter C.; Rockwell, Thomas H.; Thomas, Mark

    1986-01-01

    Twenty pilots with instrument flight ratings were asked to perform a fault-diagnosis task for which they had relevant domain knowledge. The pilots were asked to think out loud as they requested and interpreted information. Performances were then modeled as the activation and use of a frame system. Cognitive biases, memory distortions and losses, and failures to correctly diagnose the problem were studied in the context of this frame system model.

  1. Geomorphic Assessment of Activity Levels of the Three Strands of North Anatolian Fault Zone in NW Turkey

    NASA Astrophysics Data System (ADS)

    Gürbüz, E.; Gurbuz, A.

    2014-12-01

    The North Anatolian Fault Zone is a narrow zone along a length of ~900 km and width of 10 km between the Karlıova to the east and Dokurcun Valley to the west. The fault zone splays into three strands around the Dokurcun Valley and forms a wide zone with a length of 400 km and width of 100 km. From the Dokurcun Valley, while the northern strand follows a route along the Lake Sapanca, Izmit Gulf, Marmara Sea and Saroz Gulf and connects to the North Aegean Trough, the middle strand tracks Lake Iznik, Gemlik and Bandırma Bays and southern coasts of the Marmara Sea. Although there is not a consensus on where it branches from the main strand, it is generally accepted that it trails a definite route along the Yenişehir, Bursa, Manyas-Karacabey and Yenice basins, and continues towards the Edremit Gulf in the west. Given the slip rates and seismic activities of the last century, the ranking between these three strands show a decrease from north to south. Among these three strands, the northern one offers significant differences with high values compared to the middle and southern strands. The aim of this study is to compare the differences represented by slip rate and seismicity data with morphometric features of the three strands of North Anatolian Fault Zone that controlled by their activities during the Quaternary period. We have calculated the morphometric values for each of the fault strands in the Marmara Region according to geomorphic indices. Our study presents the middle strand, which has represented the lower activity during the instrumental period, has an important sense of activity.

  2. Late Quaternary Deformation along the North Wuitaishan Fault of the Shanxi Graben System: Active Intracontinental Rifting in North China

    NASA Astrophysics Data System (ADS)

    Corley, J.; Cochran, W. J.; Hinrichs, N.; Ding, R.; Zhang, S.; Gomez, F.

    2012-12-01

    The Shanxi rift system in north China is an intracontinental rift zone which has been active since the late Tertiary. and has produced many destructive earthquakes in recorded history. This area is of particular interest for earthquake research because of the high seismicity levels in an intraplate setting. The Shanxi rift system is composed of NNE-oriented en-echelon half-graben basins controlled by normal faults. This study focuses on the north Wutaishan fault, which bounds the Wutai Mountains and the Xingding basin, located in the northern part of the Shanxi rift system. Quaternary tectonism is investigated using remotely-sensed imagery for mapping of large tectonically-influenced landforms, field investigations for ground truth, and structural analyses. Initial neotectonic mapping utilized stereoscopic Corona satellite imagery to differentiate between fluvial and agricultural terraces; Cartosat-based DEMs were used to correct altitude measurements of terrace heights and to analyze streams and other landforms for morphometric analysis. Fluvial terraces are used to reconstruct paleo-stream profiles of the Yangyan River and nearby tributaries to determine mountain uplift rates inferred from fluvial incision, basin extension rates, and possible warping of the footwall basin block. Field work provided ground truth for fluvial terrace altitude, type of terrace, and thicknesses of alluvial and loess deposits. Another aspect of the study involves development of structural cross-section to relate fault slip to regional tectonic strain. Fault kinematic analysis of micro-fault features found in bedrock were used to assess the Quaternary stress field. Results of this study have implications in the understanding of earthquake recurrence intervals and basin evolution in the Shanxi rift system and more generally, can improve the understanding of spatial and temporal variations of seismic events in intraplate settings.

  3. Paleoseismologic and geomorphic constraints to the deformation style and activity of the Cittanova Fault (southern Calabria, Italy)

    NASA Astrophysics Data System (ADS)

    Peronace, Edoardo; Della Seta, Marta; Fredi, Paola; Galli, Paolo; Giaccio, Biagio; Messina, Paolo; Troiani, Francesco

    2016-04-01

    The western side of Southern Calabria is the epicentral region of the strongest earthquakes of Italy. These are mainly generated by extensional faults which are still poorly investigated and/or parameterized. In this study, we explore the potential of the combined analysis of geomorphic markers, stream network morphometry and paleosimological investigations, aimed at identifying and time-constraining the surface effects of the Calabrian seismogenic faults. In this perspective, we presents results from i) plano-altimetric analysis of geomorphic markers related to active tectonics (such as marine and fluvial terraces), ii) paleoseismological investigations, and iii) time-dependent river basin and long-profile metrics of the Cittanova Fault (CF). The CF, responsible for the catastrophic Mw 7.0 earthquake of 5 February 1783, is a N220° striking, 30 km-long normal fault that downthrows the crystalline-metamorphic basement of the Aspromonte massif (~1000 m asl) below the Gioia Tauro Plain, to elevations of ~500-800 m bsl. Radiocarbon dating allowed us to ascribe the depostion of a major terraced alluvial fan (Cittanova-Taurianova terrace, TAC) to the early Last Glacial Maximum (LGM) and to date the avulsion of the depositional top surface of TAC to 28 ka. As we have found remnants of the TAC also in the CF footwall offset by 12-17 m, we estimate a vertical slip rate of 0.6 ± 0.1 mm/yr for the past 28 ka. Paleoseismological data across the fault scarp evidenced at least three surface ruptures associated to ~Mw 7.0 paleoearthquakes prior to the 1783 event. The recurrence time (~3.2 kyr) is rather longer than other Apennine normal faults (0.3-2.4 kyr), whereas it is consistent with the low slip rate of CF for the late Upper Pleistocene (0.6 mm/yr). On a longer time scale, the spatial configuration of river basin morphometry evidenced the morphodynamic rensponse to the higher slip in the central sector of CF. Furthermore, long-profile metrics, and in particular the spatial

  4. Natural Radiation for Identification and Evaluation of Risk Zones for Affectation of Activated Faults in Aquifer Overexploited.

    NASA Astrophysics Data System (ADS)

    Ramos-Leal, J.; Lopez-Loera, H.; Carbajal-Perez, N.

    2007-05-01

    In basins as Mexico, Michoacán, Guanajuato, Queretaro, Aguascalientes and San Luis Potosi, the existence of faults and fractures have affected the urban infrastructure, lines of conduction of drinkable water, pipelines, etc., that when not being identified and considered, they don't reflect the real impact that these cause also to the aquifer system, modifying the permeability of the means and in occasions they work as preferential conduits that communicate hydraulically potentially to the aquifer with substances pollutants (metals, fertilizers, hydrocarbons, waste waters, etc.) located in the surface. In the Valley of San Luis Potosi, Villa of Reyes, Arista, Ahualulco and recently The Huizache-Matehuala is being strongly affected by faulting and supposedly due cracking to subsidence, however, the regional tectonic could also be the origin of this phenomenon. To know the origin of the faults and affectation to the vulnerability of the aquifer few works they have been carried out in the area. A preliminary analysis indicates that it is possible that a tectonic component is affecting the area and that the vulnerability of the aquifer in that area you this increasing. Before such a situation, it is necessary to carry out the isotopic study of the same one, for this way to know among other things, isotopic characterization, recharge places and addresses of flow of the groundwater; quality of waters and the behavior hydrochemistry with relationship to the faults. High radon values were measured in San Luis Potosi Valley, the natural source of radon could be the riolites and however, these are located to almost a once thousand meters deep for what the migration of the gas is not very probable. The anomalies radiometrics was not correlation with the faults in this case. In some areas like the Valley of Celaya, the origin of the structures and the tectonic activity in the area was confirmed, identifying the structural arrangement of the faulting, the space relationships

  5. Active tectonics in southern Xinjiang, China: Analysis of terrace riser and normal fault scarp degradation along the Hotan-Qira fault system

    NASA Technical Reports Server (NTRS)

    Avouac, Jean-Philippe; Peltzer, Gilles

    1993-01-01

    The northern piedmont of the western Kunlun mountains (Xinjiang, China) is marked at its easternmost extremity, south of the Hotan-Qira oases, by a set of normal faults trending N50E for nearly 70 km. Conspicuous on Landsat and SPOT images, these faults follow the southeastern border of a deep flexural basin and may be related to the subsidence of the Tarim platform loaded by the western Kunlun northward overthrust. The Hotan-Qira normal fault system vertically offsets the piedmont slope by 70 m. Highest fault scarps reach 20 m and often display evidence for recent reactivations about 2 m high. Successive stream entrenchments in uplifted footwallls have formed inset terraces. We have leveled topographic profiles across fault scarps and transverse abandoned terrace risers. The state of degradation of each terrace edge has been characterized by a degradation coefficient tau, derived by comparison with analytical erosion models. Edges of highest abandoned terraces yield a degradation coefficient of 33 +/- 4 sq.m. Profiles of cumulative fault scarps have been analyzed in a similar way using synthetic profiles generated with a simple incremental fault scarp model.

  6. Active tectonics in southern Xinjiang, China: Analysis of terrace riser and normal fault scarp degradation along the Hotan-Qira fault system

    SciTech Connect

    Avouac, J.P.; Peltzer, G. |

    1993-12-01

    The northern piedmont of the western Kunlun mountains (Xinjiang, China) is marked at its easternmost extremity, south of the Hotan-Qira oases, by a set of normal faults trending N50E for nearly 70 km. Conspicuous on Landsat and SPOT images, these faults follow the southeastern border of a deep flexural basin and may be related to the subsidence of the Tarim platform loaded by the western Kunlun northward overthrust. The Hotan-Qira normal fault system vertically offsets the piedmont slope by 70 m. Highest fault scarps reach 20 m and often display evidence for recent reactivations about 2 m high. Successive stream entrenchments in uplifted footwallls have formed inset terraces. We have leveled topographic profiles across fault scarps and transverse abandoned terrace risers. The state of degradation of each terrace edge has been characterized by a degradation coefficient tau, derived by comparison with analytical erosion models. Edges of highest abandoned terraces yield a degradation coefficient of 33 +/- 4 sq.m. Profiles of cumulative fault scarps have been analyzed in a similar way using synthetic profiles generated with a simple incremental fault scarp model.

  7. New Constraints on the Geometry and Kinematics of Active Faults in the Hinterland of the Northwest Himalaya

    NASA Astrophysics Data System (ADS)

    Morell, K. D.; Sandiford, M.; Rajendran, C. C. P.; Fink, D.; Kohn, B. P.

    2014-12-01

    The geometry and kinematics of the active, and potentially seismogenic, fault structures within the hinterland of the Himalaya have proven challenging to constrain in the past, primarily because active faults in this region tend to be buried beneath the subsurface and active seismicity often does not align with surficially mapped fault traces. Here we present a series of complementary datasets, including results from low temperature thermochronology, basin-wide erosion rates from 10Be concentrations, and topographic and longitudinal profile analyses, that place constraints on the spatial distribution of fault-related rock uplift and erosion across a ~400-km long region of the lower and high Himalaya of northwest India. Results from our analyses reveal that hillslope morphology and channel steepness are relatively invariant parallel to strike but vary significantly across strike, with the most prominent and abrupt variations occurring at the physiographic transition between the lower and high Himalaya (PT2), near the axial trace of the ramp-flat transition in the Main Himalayan Thrust (MHT). The cross-strike changes in geomorphology observed across the PT2 correlate with an order of magnitude northward increase in basin-wide erosion rates (~0.06-0.8 mm/a) and a corresponding decrease in apatite (~5-2 Ma) and zircon (U-Th)/He (~10-2 Ma) cooling ages. Combined with published geophysical and seismicity data, we interpret these results to reflect spatial variations in rock uplift and exhumation induced by a segment of the MHT ramp-flat system that is at least ~400 km long and ~125 km wide. The relatively young (U-Th)/He ages (<10 Ma) greater than 20 km south of the MHT ramp-flat transition preliminarily suggest that the kinematics of this system are best explained by a model which incorporates an accreting duplex on the MHT ramp but additional forthcoming analyses, including thermal modeling, will confirm if this hypothesis is robust.

  8. Topography, river network and recent fault activity at the margins of the Central Main Ethiopian Rift (East Africa)

    NASA Astrophysics Data System (ADS)

    Molin, Paola; Corti, Giacomo; Sembroni, Andrea

    2016-04-01

    Along its length, the Main Ethiopian Rift (MER) in East Africa records a transition from early fault-dominated morphology in the South to axial magma assisted-rifting typical of continental break-up in the North. It is one of the few locations on Earth offering a complete picture of the evolution of continental rifting and thus provides a unique opportunity to directly analyze how the drainage network reorganize under extensional tectonic forcing. In this paper we present a new analysis of the river network and relative landforms - complemented with a summary of recent geological data - at both rift margins of the Central MER, a key sector of the rift capturing the phase of drainage reorganization between incipient and mature rifting. This analysis shows that hydrography is strongly influenced by recent tectonics. Rectangular drainage patterns, windgaps, and lacustrine/swampy areas formed by structural dams document that the rivers are in continuous competition with fault activity. The irregular longitudinal profiles (with knickpoints/knickzones in correspondence with faults) also suggest that rivers are in a transient state of disequilibrium related to recent tectonic activity at rift margins, in agreement with previous geological and seismological data. A more regional analysis extended to the adjoining Northern and Southern MER indicates that rifting evolves from initial stages characterized by margins poorly incised by rivers with gentle channel gradients (except in correspondence with faults), to mature phases in which rift margins are highly incised by a well organized fluvial network composed by concave and steep rivers. Our regional analysis also indicates a stronger and/or more recent tectonic activity at the rift margins proceeding to the south, in line with previous models of rift development.

  9. Topography, river network and recent fault activity at the margins of the Central Main Ethiopian Rift (East Africa)

    NASA Astrophysics Data System (ADS)

    Molin, Paola; Corti, Giacomo

    2015-11-01

    Along its length, the Main Ethiopian Rift (MER) in East Africa records a transition from early fault-dominated morphology in the South to axial magma assisted-rifting typical of continental break-up in the North. It is one of the few locations on Earth offering a complete picture of the evolution of continental rifting and thus provides a unique opportunity to directly analyze how the drainage network reorganizes under extensional tectonic forcing. In this paper we present a new analysis of the river network and relative landforms-complemented with a summary of recent geological data-at both rift margins of the Central MER, a key sector of the rift capturing the phase of drainage reorganization between incipient and mature rifting. This analysis shows that hydrography is strongly influenced by recent tectonics. Rectangular drainage patterns, windgaps, and lacustrine/swampy areas formed by structural dams document that the rivers are in continuous competition with fault activity. The irregular longitudinal profiles (with knickpoints/knickzones in correspondence with faults) also suggest that rivers are in a transient state of disequilibrium related to recent tectonic activity at rift margins, in agreement with previous geological and seismological data. A more regional analysis extended to the adjoining Northern and Southern MER indicates that rifting evolves from initial stages characterized by margins poorly incised by rivers with gentle channel gradients (except in correspondence with faults), to mature phases in which rift margins are highly incised by a well organized fluvial network composed by concave and steep rivers. Our regional analysis also indicates a stronger and/or more recent tectonic activity at the rift margins proceeding to the south, in line with previous models of rift development.

  10. Physical modeling of the formation and evolution of seismically active fault zones

    USGS Publications Warehouse

    Ponomarev, A.V.; Zavyalov, A.D.; Smirnov, V.B.; Lockner, D.A.

    1997-01-01

    Acoustic emission (AE) in rocks is studied as a model of natural seismicity. A special technique for rock loading has been used to help study the processes that control the development of AE during brittle deformation. This technique allows us to extend to hours fault growth which would normally occur very rapidly. In this way, the period of most intense interaction of acoustic events can be studied in detail. Characteristics of the acoustic regime (AR) include the Gutenberg-Richter b-value, spatial distribution of hypocenters with characteristic fractal (correlation) dimension d, Hurst exponent H, and crack concentration parameter Pc. The fractal structure of AR changes with the onset of the drop in differential stress during sample deformation. The change results from the active interaction of microcracks. This transition of the spatial distribution of AE hypocenters is accompanied by a corresponding change in the temporal correlation of events and in the distribution of event amplitudes as signified by a decrease of b-value. The characteristic structure that develops in the low-energy background AE is similar to the sequence of the strongest microfracture events. When the AR fractal structure develops, the variations of d and b are synchronous and d = 3b. This relation which occurs once the fractal structure is formed only holds for average values of d and b. Time variations of d and b are anticorrelated. The degree of temporal correlation of AR has time variations that are similar to d and b variations. The observed variations in laboratory AE experiments are compared with natural seismicity parameters. The close correspondence between laboratory-scale observations and naturally occurring seismicity suggests a possible new approach for understanding the evolution of complex seismicity patterns in nature. ?? 1997 Elsevier Science B.V. All rights reserved.

  11. Study of Active Faults in the Three Gorges Dam region by Detecting and Relocating Aftershocks

    NASA Astrophysics Data System (ADS)

    Huang, R.; Zhu, L.; Xu, Y.

    2014-12-01

    Seismicity in the Three Gorges Dam (TGD) region and its adjacent areas increased dramatically as the water- level of the TGD reservoir rises since its completion in 2003. Accordingly, many efforts have been put forward to quantify the seismicity and geological hazards in the region. However, the precise detective of earthquakes, especially for the minor ones, remains difficulty because of sparse distribution of permanent seismic stations. From December 2013 to June 2014, we deployed 30 three-component broadband seismic stations in the TGD region. During the deployment, we recorded two earthquakes of magnitudes lager than 5.0, one occurred on December 16th 2013 in Badong and another on March 30th 2014 in Zigui. We firstly used a sliding-window cross-correlation (SCC) detection technique to supplement the events catalog from the China Earthquake Networks Center. Over 500 new events with ML lager than 0.5 were detected. We then relocated 502 events out of the total 987 events using the double-difference (DD) relocation algorithm. We also determined moment tensors of some large earthquakes using gCAP. The results clearly show two active faults along Yangtze River with dips of 50 degrees and 90 degrees to a maximum depth of 10 km, respectively. And they also reveal that water might have permeated to a depth of 6 km corresponds to the interface of sediments and metamorphic basement beneath Zigui Basin. We thus preliminarily judge that the quakes are triggered by local stress adjustment resulting of fluctuation of Three Gorges reservoir's loading.

  12. Synthetic earthquake catalogs simulating seismic activity in the Corynth Gulf, Greece, fault system

    NASA Astrophysics Data System (ADS)

    Console, R.; Carluccio, R.; Papadimitriou, E. E.; Karakostas, V. G.

    2014-12-01

    The characteristic earthquake hypothesis is the basis of time-dependent modeling of earthquake recurrence on major faults, using the renewal process methodology. However, the characteristic earthquake hypothesis is not strongly supported by observational data. Few fault segments have long historical or paleoseismic records of individually dated ruptures, and when data and parameter uncertainties are allowed for, the form of the recurrence-distribution is difficult to establish. This is the case, for instance, of the Corinth gulf fault system, for which documents about strong earthquakes exist for at least two thousand years, but they can be considered complete for magnitudes > 6.0 only for the latest 300 years, during which only few characteristic earthquakes are reported for single fault segments. The use of a physics-based earthquake simulator has allowed the production of catalogs lasting 100,000 years and containing more than 500,000 events of magnitudes > 4.0. The main features of our simulation algorithm are (1) the imposition of an average slip rate released by earthquakes to every single segment recognized in the investigated fault system, (2) the interaction between earthquake sources, (3) a self-organized earthquake magnitude distribution, and (4) the effect of minor earthquakes in redistributing stress. The application of our simulation algorithm to the Corinth gulf fault system has shown realistic features in time, space and magnitude behavior of the seismicity. These features include long-term periodicity of strong earthquakes, short-term clustering of both strong and smaller events, and a realistic earthquake magnitude distribution departing from the Gutenberg-Richter distribution in the higher magnitude range.

  13. Fluvial Record of Active Deformation Along the Canyon River Fault in the Wynoochee River Valley, WA

    NASA Astrophysics Data System (ADS)

    Delano, J.; Amos, C. B.; Loveless, J. P.; Rittenour, T. M.

    2015-12-01

    Ongoing uplift of the Olympic Peninsula of Washington State represents unknown contributions from Cascadia subduction zone processes, including earthquakes, interseismic deformation, aseismic slow slip events, and north-south shortening of the North American plate focused on upper plate faults. The relationship between upper plate faults and Cascadia subduction is poorly understood, as is the seismic hazard posed by these structures to the greater Puget Sound region. The Wynoochee River is a south-flowing drainage in the southern Olympic Mountains bisected by a previously uncharacterized section of the Canyon River reverse fault. In this study we utilize high-resolution aerial lidar and optically stimulated luminescence (OSL) dating of offset fluvial terraces to determine the kinematics and slip rate of the Canyon River fault over the late Quaternary. In combination with surficial geologic mapping and differential GPS surveys of terrace straths observed in the field, we also determine incision rates along the Wynoochee River from OSL dates. Our mapping reveals eight generations of fluvial and glaciofluvial terraces, with twenty-one pending ages from OSL sampling of fluvial sands intercalated with outwash and river gravels. Additionally, we compare our slip rate results with a boundary element model, estimating the stress on the Canyon River fault over the recent decades, as constrained by GPS data from the Cascadia subduction zone. Preliminary results indicate that the Canyon River fault is a long-lived feature with south-side-up and left-lateral displacement. Taken together, our results enable comparison of deformation rates constrained by short-term, geodetic data with those acting over longer-term geologic time scales.

  14. Quaternary tectonic activity of the Carboneras Fault in the La Serrata range (SE Iberia): Geomorphological and chronological constraints

    NASA Astrophysics Data System (ADS)

    Moreno, Ximena; Masana, Eulàlia; Pallàs, Raimon; Gràcia, Eulàlia; Rodés, Ángel; Bordonau, Jaume

    2015-11-01

    The Eastern Betic Shear Zone (EBSZ) in Southern Iberia is known to accommodate part of the 4-5 mm/yr convergence between Africa and Iberia, but its seismic hazard is not sufficiently understood for an accurate risk assessment. One of the main structures of the EBSZ, the left-lateral 150 km-long Carboneras Fault, displays no clear instrumental and historical activity despite being morphologically expressive. Detailed geomorphological mapping, geochronological analysis, and structural observation on the La Serrata segment of the Carboneras Fault were designed to investigate its recent evolution. Quaternary sediments and geomorphic features were targeted and 42 new numerical ages were obtained based on 66 samples (thermoluminescence, U-series, 14C, 10Be). The chronological framework of La Serrata was constructed by combining these numerical ages with a conceptual model previously developed in the region, which assumes that alluvial fan aggradation was produced during cold and dry periods (glacials and stadials), whereas stability and phases of calcrete formation were favored during warm and wetter periods (interglacials and interstadials). The spatial distribution of dated alluvial fans suggests an early phase of uplift that probably occurred between 1 Ma and 56.6 ka in the northeastern portion of the study area, whereas in the southwest sector the main uplift phase occurred later than 110.3 ka. A decline in fault activity would have taken place after 30.8 ka. Vertically offset dated units indicate minimum dip-slip rates of 0.05 mm/yr and 0.18 mm/yr, averaged for the last 1 Ma and the last 110.3 ka, respectively. Deflected channels and associated dated units yield a minimum left-lateral strike-slip rate of 1.31 mm/yr, averaged for the last 110.3 ka. The most recent fault movement of the fault could be younger than AD 637. Our results suggest therefore that the Carboneras Fault is among the fastest in Iberia, and should be considered in future hazard analyses.

  15. Evolution of earthquake rupture potential along active faults, inferred from seismicity rates and size distributions

    NASA Astrophysics Data System (ADS)

    Tormann, Thessa; Wiemer, Stefan; Enescu, Bogdan; Woessner, Jochen

    2016-04-01

    One of the major unresolved questions in seismology is the evolution in time and space of the earthquake rupture potential and thus time-dependent hazard along active faults. What happens after a major event: is the potential for further large events reduced as predicted from elastic rebound, or increased as proposed by current-state short-term clustering models? How does the rupture potential distribute in space, i.e. does it reveal imprints of stress transfer? Based on the rich earthquake record from the Pacific Plate along the Japanese coastline we investigate what information on spatial distributions and temporal changes of a normalized rupture potential (NRP) for different magnitudes can be derived from time-varying, local statistical characteristics of well and frequently observed small-to-moderate seismicity. Seismicity records show strong spatio-temporal variability in both activity rates and size distribution. We analyze 18 years of seismicity, including the massive 2011 M9 Tohoku earthquake and its aftermath. We show that the size distribution of earthquakes has significantly changed before (increased fraction of larger magnitudes) and after that mainshock (increased fraction of smaller magnitudes), strongest in areas of highest coseismic slip. Remarkably, a rapid recovery of this effect is observed within only few years. We combine this significant temporal variability in earthquake size distributions with local activity rates and infer the evolution of NRP distributions. We study complex spatial patterns and how they evolve, and more detailed temporal characteristics in a simplified spatial selection, i.e. inside and outside the high slip zone of the M9 earthquake. We resolve an immediate and strong NRP increase for large events prior to the Tohoku event in the subsequent high slip patch and a very rapid decrease inside this high-stress-release area, coupled with a lasting increase of NRP in the immediate surroundings. Even in the center of the Tohoku

  16. Late Cenozoic deformation of the Da'an-Dedu Fault Zone and its implications for the earthquake activities in the Songliao basin, NE China

    NASA Astrophysics Data System (ADS)

    Zhongyuan, Yu; Peizhen, Zhang; Wei, Min; Qinghai, Wei; Limei, Wang; Bin, Zhao; Shuang, Liu; Jian, Kang

    2015-08-01

    The Da'an-Dedu Fault Zone is a major tectonic feature cutting through the Songliao Basin from south to north in NE China. Five earthquakes with magnitudes over 5 that occurred during the past 30 years suggest the fault zone is a seismogenic structure with future seismic potential. The structural pattern, tectonic history, Quaternary activity and seismic potential have previously been unknown due to the Quaternary sedimentary coverage and lack of large historic earthquakes (M > 7). In this paper, we use seismic reflection profiles and drilling from petroleum explorations and shallow-depth seismic reflections to study those problems. The total length of the Da'an-Dedu Fault Zone is more than 400 km; modern seismicity delineates it into 4 segments each with a length of 90-100 km. In cross-section view, the folds and associated faults form a complex structural belt with a width of more than 10 km. Shallow-level seismic reflection across the Da'an-Dedu Fault Zone reveals that the Late Quaternary sediments were folded and faulted, indicating its present tectonic activity. The Da'an-Dedu Fault Zone and Songliao Basin have been subjected to three stages of tectonic evolution: a rifting stage characterized by normal faulting and extension (∼145-112 Ma), a prolonged stage of thermal subsidence (∼112-65 Ma), and a tectonic reversal that has been taking place since ∼65 Ma. Our shallow-level reflection profiles show that the folding and reverse faulting have influenced the Late Quaternary sediments. The seismicity and moderate earthquakes suggest that the tectonic activity persists today. The deformation rate across the Da'an-Dedu Fault Zone, however, is measured to be very slow. In conjunction with the inference that most deformation in NE China may be taken up by the Yilan-Yitong Fault Zone bounding the Songliao Basin to the east, we suggest moderate earthquake potential and thus moderate seismic hazards along the Da'an-Dedu Fault Zone. The geological structures, which

  17. Compilation of selected faults and lineaments that may be relevant to a study of seismic activity in southern Nevada and part of adjacent California

    SciTech Connect

    Bucknam, R.C.

    1983-02-01

    The enclosed preliminary map shows selected prominent faults and regional topographic lineaments that may be relevant to a study of known or potential seismic activity in the California-southern Nevada region surrounding the Nevada Test Site.

  18. Modeling crustal deformation near active faults and volcanic centers: a catalog of deformation models and modeling approaches

    USGS Publications Warehouse

    Battaglia, Maurizio; ,; Peter, F.; Murray, Jessica R.

    2013-01-01

    This manual provides the physical and mathematical concepts for selected models used to interpret deformation measurements near active faults and volcanic centers. The emphasis is on analytical models of deformation that can be compared with data from the Global Positioning System (GPS) receivers, Interferometric synthetic aperture radar (InSAR), leveling surveys, tiltmeters and strainmeters. Source models include pressurized spherical, ellipsoidal, and horizontal penny-shaped geometries in an elastic, homogeneous, flat half-space. Vertical dikes and faults are described following the mathematical notation for rectangular dislocations in an elastic, homogeneous, flat half-space. All the analytical expressions were verified against numerical models developed by use of COMSOL Multyphics, a Finite Element Analysis software (http://www.comsol.com). In this way, typographical errors present were identified and corrected. Matlab scripts are also provided to facilitate the application of these models.

  19. Recognition of coseismic-related microstructures and behaviour of clay minerals within the core of active fault

    NASA Astrophysics Data System (ADS)

    Buatier, M.; Chauvet, A.; Ritz, J.; Jolivet, M.; Bayarjargal, B.; Vitalie, M.; Vassalo, R.

    2008-12-01

    Seismogenic faults are commonly characterized by a zonation with foliated gouge and breccias surrounded by damage zone. This zonation results from co-seismic or inter-seismic deformation and fluid-rock interactions. Based on field, textural, microtextural and clay mineralogical analysis, the core zone of an active fault located in the Bogd Mongolian massif has been studied. This fault is supposed to be an ancient major ductile shear zone re-activated during the Quaternary. Field studies reveal the complexity of the fault cores with the association between fragmented/ brecciated domains and at least two generations of gouge. The first gouge presents a foliated structure. The second one is characterized by an homogeneous black, thin, fine-grained, gouge. According to field constraints, the thin gouge level can correspond to the last seismic event. Catholuminescence and SEM investigations allow to characterize the texture of each gouge and surrounding rocks. Additional measurement of grain size distribution, grain circularity, grain shape and grain fabrics allow the clear distinction between the two different gouge textures: foliated and isotropic. In the foliated gouge, mineralogical study (SEM-BSE and DRX) displays evidence of fluid-rock interactions with alteration of micas to illite/smectite and formation of kaolinite. The presence of authigenic gypsum crystals and Fe-oxyhydroxyde suggests interseismic fluid circulation in this permeable structure. The last generation of gouge with isotropic texture is clay rich and is characterized by the presence of smectite (hydrated clay mineral). The data suggest polyphase deformation with ductile structures associated with brittle deformation implying communition process. The debate concerns the mode of formation of the gouge and the origin of clay minerals.

  20. Recent faulting and active shortening of the Middle Atlas Mountains, Morocco, within the diffuse African-Eurasian plate boundary

    NASA Astrophysics Data System (ADS)

    Rigby, M.; Gomez, F.; Zakir, A.; Hahou, Y.; Jabour, N.

    2007-12-01

    The NE-SW trending Middle Atlas Mountains are an active intracontinental mountain belt within the diffuse African - Eurasian plate boundary. The mountain belt is obliquely oriented to the NNW-SSE direction of Late Cenozoic plate convergence. Both shear and compressional features are exhibited with apparent slip partitioning: Folding and thrusting is concentrated in the Folded Middle Atlas, whereas strike-slip dominates in the Tabular Middle Atlas. In the central part of the Folded Middle Atlas, fault scarps of Quaternary alluvium, including a 4.5 meter (probably composite) scarp and a 1 meter (possibly single event) scarp, attest to recent faulting along the mountain front. Detailed topographic mapping of the scarps provides a basis for geomorphic analysis and degradation modeling. Furthermore, the reconstruction of longitudinal stream terrace profiles helps constrain a long term deformation history. Radiocarbon and pending cosmogenic dates provide age constraints on the faulted surfaces and the multiple stream terraces in the area. To place these active tectonic observations in a larger context, the fault and fold geometry has been assessed by completing a 10 km structural transect across the frontal thrust, providing basis for the construction of a balanced cross-section. By combining the structural geometry with the uplift rate, a minimum estimate of the rate of horizontal shortening in the Middle Atlas can be evaluated. Preliminary results suggest the Middle Atlas may accommodate 5 - 10 percent of the total 4.5 mm/yr convergence between the African and Eurasian plates. These results demonstrate that the Middle Atlas Mountains are a integral part of the diffuse plate boundary, as well as suggesting a modest level of earthquake hazard in the region.

  1. Active tectonics of the Devils Mountain Fault and related structures, northern Puget Lowland and eastern Strait of Juan de Fuca region, Pacific Northwest

    USGS Publications Warehouse

    Johnson, Samuel Y.; Dadisman, Shawn V.; Mosher, David C.; Blakely, Richard J.; Childs, Jonathan R.

    2001-01-01

    Information from marine high-resolution and conventional seismic-reflection surveys, aeromagnetic mapping, coastal exposures of Pleistocene strata, and lithologic logs of water wells is used to assess the active tectonics of the northern Puget Lowland and eastern Strait of Juan de Fuca region of the Pacific Northwest. These data indicate that the Devils Mountain Fault and the newly recognized Strawberry Point and Utsalady Point faults are active structures and represent potential earthquake sources.

  2. Post failure localization instabilities in chemically active creeping faults: Steady-state bifurcation and transient analysis

    NASA Astrophysics Data System (ADS)

    Alevizos, S.; Poulet, T.; Veveakis, M.

    2014-12-01

    In this study we emphasize in the post failure evolution of a creeping fault, and provide temporal and spatial modes of evolution. In particular we study the behavior of a fluid-saturated fault under shear, based on the assumption that the fabric presents rate- and temperature dependent response to shear loading. A creeping fault of this type can, under certain conditions, produce excess heat due to shear heating, reaching temperatures which are high enough for triggering endothermic chemical reactions. We focus on the decomposition reactions and incorporate excess pore pressure generation and variations of the porosity due to the chemical effects (a process called chemical pressurization). After deriving the corresponding system of equations in the region of the ultra-cataclastic core, we study the influence of the model parameters, namely the frictional, hydraulic and chemical properties of the material, along with the boundary conditions of the problem, on the behavior of the fault and through a non-linear bifurcation analysis we provide regimes of stable-frictional sliding and pressurization. Furthermore, the system is integrated in time to extract its temporal behavior, providing regimes of stable creep, non-periodic and periodic seismic slip events due to chemical pressurization, depending on their frictional properties. It is shown that this chemically induced seismic slip is an ultra-localized event in the post failure regime. It takes place in an extremely narrow band, 2 orders of magnitude narrower than the initial one, verifying the field observations.

  3. Spatial distribution of soil radon as a tool to recognize active faulting on an active volcano: the example of Mt. Etna (Italy).

    PubMed

    Neri, Marco; Giammanco, Salvatore; Ferrera, Elisabetta; Patanè, Giuseppe; Zanon, Vittorio

    2011-09-01

    This study concerns measurements of radon and thoron emissions from soil carried out in 2004 on the eastern flank of Mt. Etna, in a zone characterized by the presence of numerous seismogenic and aseismic faults. The statistical treatment of the geochemical data allowed recognizing anomaly thresholds for both parameters and producing distribution maps that highlighted a significant spatial correlation between soil gas anomalies and tectonic lineaments. The seismic activity occurring in and around the study area during 2004 was analyzed, producing maps of hypocentral depth and released seismic energy. Both radon and thoron anomalies were located in areas affected by relatively deep (5-10 km depth) seismic activity, while less evident correlation was found between soil gas anomalies and the released seismic energy. This study confirms that mapping the distribution of radon and thoron in soil gas can reveal hidden faults buried by recent soil cover or faults that are not clearly visible at the surface. The correlation between soil gas data and earthquakes depth and intensity can give some hints on the source of gas and/or on fault dynamics. PMID:21704438

  4. Spatial distribution of soil radon as a tool to recognize active faulting on an active volcano: the example of Mt. Etna (Italy).

    PubMed

    Neri, Marco; Giammanco, Salvatore; Ferrera, Elisabetta; Patanè, Giuseppe; Zanon, Vittorio

    2011-09-01

    This study concerns measurements of radon and thoron emissions from soil carried out in 2004 on the eastern flank of Mt. Etna, in a zone characterized by the presence of numerous seismogenic and aseismic faults. The statistical treatment of the geochemical data allowed recognizing anomaly thresholds for both parameters and producing distribution maps that highlighted a significant spatial correlation between soil gas anomalies and tectonic lineaments. The seismic activity occurring in and around the study area during 2004 was analyzed, producing maps of hypocentral depth and released seismic energy. Both radon and thoron anomalies were located in areas affected by relatively deep (5-10 km depth) seismic activity, while less evident correlation was found between soil gas anomalies and the released seismic energy. This study confirms that mapping the distribution of radon and thoron in soil gas can reveal hidden faults buried by recent soil cover or faults that are not clearly visible at the surface. The correlation between soil gas data and earthquakes depth and intensity can give some hints on the source of gas and/or on fault dynamics.

  5. COMPARISON OF EXERCISE PARTICIPATION RATES FOR CHILDREN IN THE LITERATURE WITH THOSE IN EPA'S CONSOLIDATED HUMAN ACTIVITY DATABASE (CHAD)

    EPA Science Inventory

    CHAD contains over 22,000 person-days of human activity pattern survey data. Part of the database includes exercise participation rates for children 0-17 years old, as well as for adults. Analyses of this database indicates that approximately 34% of the 0-17 age group (herea...

  6. Activation of Fault Structures South of the La Habra Earthquake Rupture As Evidenced By UAVSAR Imaging

    NASA Astrophysics Data System (ADS)

    Donnellan, A.; Parker, J. W.; Grant Ludwig, L.; Hauksson, E.

    2014-12-01

    The 28 March, 2014 M 5.2 La Habra earthquake occurred on a northeast striking, northwest dipping left-lateral oblique thrust fault at the northeastern margin of the LA Basin, where regional right-lateral shear is accommodated by major northwest trending faults of the Peninsular Ranges, and north-south shortening is accommodated by north-dipping thrust faults and east-west trending folds of the Transverse Ranges. The La Habra mainshock location and focal mechanism is northwest of but sub-parallel to the Puente Hills thrust fault. Relocated seismicity highlights a northeast-trending rupture plane consistent with the magnitude and focal mechanism of the event. NASA's UAVSAR L-Band radar instrument was flown for north and south looking lines before the earthquake on 22 January 2014. The north looking line was reflown three days after the earthquake on 31 March, 2014, and the south looking line was reflown a week later on 4 April 2014. The UAVSAR Repeat Pass Interferogram (RPI) products show deformation consistent with the location of the mainshock beneath the town of La Habra. The results also show considerable aseismic northward horizontal deformation with minor uplift in the West Coyote Hills, south of the relocated seismicity. Inversion of the combined interferograms is consistent with south dipping low-angle (7°) shallow slip that corresponds to bedding plane attitudes and a mapped unconformity. The entire West Coyote Hills show 37 mm of modeled northward slip with an additional 34 mm of modeled slip concentrated near the Coyote Hills Park northeast of the intersection of Rosecrans Avenue and North Gilbert Street. A narrow band of shortening was also observed with UAVSAR, and confirmed with on-the-ground field observations, at the Trojan Way Kink Band, nearly one fault dimension southwest of the main rupture.

  7. Data-based fault-tolerant control of high-speed trains with traction/braking notch nonlinearities and actuator failures.

    PubMed

    Song, Qi; Song, Yong-Duan

    2011-12-01

    This paper investigates the position and velocity tracking control problem of high-speed trains with multiple vehicles connected through couplers. A dynamic model reflecting nonlinear and elastic impacts between adjacent vehicles as well as traction/braking nonlinearities and actuation faults is derived. Neuroadaptive fault-tolerant control algorithms are developed to account for various factors such as input nonlinearities, actuator failures, and uncertain impacts of in-train forces in the system simultaneously. The resultant control scheme is essentially independent of system model and is primarily data-driven because with the appropriate input-output data, the proposed control algorithms are capable of automatically generating the intermediate control parameters, neuro-weights, and the compensation signals, literally producing the traction/braking force based upon input and response data only--the whole process does not require precise information on system model or system parameter, nor human intervention. The effectiveness of the proposed approach is also confirmed through numerical simulations. PMID:22167352

  8. Estimate of the post-Last Glacial Maximum tectonic subsidence and attempt to elucidate the subsurface geometry of the active Shanchiao Fault in the Taipei metropolis, Taiwan

    NASA Astrophysics Data System (ADS)

    Chen, C.; Lee, J.; Chan, Y.; Lu, C.; Teng, L. S.

    2011-12-01

    The Taipei Metropolis, home to some 10 million people, is subject to seismic hazard originated from not only ground shaking in thick alluvial deposits due to distant faults or sources scattered throughout the Taiwan region, but also active faulting directly underneath. Northern Taiwan including the Taipei region is currently affected by post-orogenic (Plio-Pleistocene arc-continent collision) processes related to backarc extension of the Ryukyu subduction system. The Shanchiao Fault, an active normal fault outcropping along the western boundary of the Taipei Basin and dipping to the east, is investigated here for the areal extent and magnitude of its recent activity. Based on the growth faulting analysis in the Wuku profile in the central portion of the fault, one key horizon - the top of the Jingmei Conglomerate which was an alluvial fan formed rapidly when a major drainage reorganization occurred during the Last Glacial Maximum - serves to be the marker of tectonic subsidence since its inception around 23 ka. A determination and compilation of the depths of the Jingmei Conglomerate top horizon from nearly 500 borehole records within the Taipei Basin demonstrates that the hanging-wall deforms in a roll-over fashion and the offset is largest in the Wuku-Luzhou area in the central portion of the fault and decreases toward the southern tip of the fault. A geologic profile across the fault zone in the Luzhou area reveals the similar main-branch fault half-negative flower structural pattern observed in the Wuku profile, a phenomenon we interpreted to be originated from the geometry of the basin basement and the strong rheological contrast between unconsolidated basin sediments and basement rocks. We also attempt to resolve the poorly-known subsurface geometry of the Shanchiao Fault by simple elastic dislocation models. The surface deformation recorded by the above compilation is representative of the latest Quaternary period as it spans probably more than 10 earthquake

  9. Regional Geologic Map of San Andreas and Related Faults in Carrizo Plain, Temblor, Caliente and La Panza Ranges and Vicinity, California; A Digital Database

    USGS Publications Warehouse

    Dibblee, T. W.; Digital database compiled by Graham, S. E.; Mahony, T.M.; Blissenbach, J.L.; Mariant, J.J.; Wentworth, C.M.

    1999-01-01

    This Open-File Report is a digital geologic map database. The report serves to introduce and describe the digital data. There is no paper map included in the Open-File Report. The report includes PostScript and PDF plot files that can be used to plot images of the geologic map sheet and explanation sheet. This digital map database is prepared from a previously published map by Dibblee (1973). The geologic map database delineates map units that are identified by general age, lithology, and clast size following the stratigraphic nomenclature of the U.S. Geological Survey. For descriptions of the units, their stratigraphic relations, and sources of geologic mapping, consult the explanation sheet (of99-14_4b.ps or of99-14_4d.pdf), or the original published paper map (Dibblee, 1973). The scale of the source map limits the spatial resolution (scale) of the database to 1:125,000 or smaller. For those interested in the geology of Carrizo Plain and vicinity who do not use an ARC/INFO compatible Geographic Information System (GIS), but would like to obtain a paper map and explanation, PDF and PostScript plot files containing map images of the data in the digital database, as well as PostScript and PDF plot files of the explanation sheet and explanatory text, have been included in the database package (please see the section 'Digital Plot Files', page 5). The PostScript plot files require a gzip utility to access them. For those without computer capability, we can provide users with the PostScript or PDF files on tape that can be taken to a vendor for plotting. Paper plots can also be ordered directly from the USGS (please see the section 'Obtaining Plots from USGS Open-File Services', page 5). The content and character of the database, methods of obtaining it, and processes of extracting the map database from the tar (tape archive) file are described herein. The map database itself, consisting of six ARC/INFO coverages, can be obtained over the Internet or by magnetic tape

  10. Active fault detection and isolation of discrete-time linear time-varying systems: a set-membership approach

    NASA Astrophysics Data System (ADS)

    Mojtaba Tabatabaeipour, Seyed

    2015-08-01

    Active fault detection and isolation (AFDI) is used for detection and isolation of faults that are hidden in the normal operation because of a low excitation signal or due to the regulatory actions of the controller. In this paper, a new AFDI method based on set-membership approaches is proposed. In set-membership approaches, instead of a point-wise estimation of the states, a set-valued estimation of them is computed. If this set becomes empty the given model of the system is not consistent with the measurements. Therefore, the model is falsified. When more than one model of the system remains un-falsified, the AFDI method is used to generate an auxiliary signal that is injected into the system for detection and isolation of faults that remain otherwise hidden or non-isolated using passive FDI (PFDI) methods. Having the set-valued estimation of the states for each model, the proposed AFDI method finds an optimal input signal that guarantees FDI in a finite time horizon. The input signal is updated at each iteration in a decreasing receding horizon manner based on the set-valued estimation of the current states and un-falsified models at the current sample time. The problem is solved by a number of linear and quadratic programming problems, which result in a computationally efficient algorithm. The method is tested on a numerical example as well as on the pitch actuator of a benchmark wind turbine.

  11. Knickpoint series of gullies along the Luoyunshan Piedmont and its relation with fault activity since late Pleistocene

    NASA Astrophysics Data System (ADS)

    Sun, Changbin; Wan, Tianfeng; Xie, Xinsheng; Shen, Xiaoming; Liang, Kuan

    2016-09-01

    The authors surveyed the longitudinal profiles of 28 gullies across the Luoyunshan Piedmont fault (LPF) by differential GPS and dating of sediments well preserved in the typical terraces and obtained 6-level knickpoint series of the gullies along the Luoyunshan Piedmont. The authors compared it with previous studies on the paleo-earthquakes of the LPF revealed by trenches and found that the paleo-earthquake events from knickpoint and trench studies are in good agreement in terms of the time of occurrence and vertical displacement of the fault. It shows studying the paleo-earthquake events of the fault by knickpoint series is feasible. At last, the authors established a more complete paleo-earthquake sequence of the LPF supported by geomorphologic and sedimentary evidence, i.e., six paleo-earthquake events happened on the LPF from about 28,000 years ago; the LPF has the characteristic of quasi-periodic recurrence and the average recurrence interval is 4585 years. The vertical displacement of the paleo-earthquake events is 2.4-3.0 m; according to the empirical equations between co-seismic displacement and earthquake magnitude the magnitude of these events is Ms 7.0-7.5. This study aims to complement and improve the traditional trenching method, provide theoretical and methodological support for the research of active tectonics, and contribute important information for the seismic hazard assessment of the densely populated Linfen area.

  12. Active emergent thrust associated with a detachment fold: A case study of the eastern boundary fault of Takada plain, central Japan

    NASA Astrophysics Data System (ADS)

    Kato, N.; Ishiyama, T.; Sato, H.; Saito, H.; Kurashimo, E.; Abe, S.

    2012-04-01

    To estimate seismic hazards, understanding the relationship between active fault and seismic source fault is crucial. Along the Japan Sea coast of Northern Honshu, Japan, thick sediments, deposited in the Miocene rift-grabens, formed fold-and-thrust belt, due to the shortening deformation since the Pliocene time. Most of the thrusts are active and show clear geomorphological evidences. Some of the thrusts are secondary faults, produced by the folding of competent layers. To elucidate the relationship between an emergent thrust and deep-sited seismogenic source fault, we performed shallow high-resolution seismic reflection profiling across the eastern boundary fault of the Takada plain, central Japan. Based on the moropho-tectonic data, the vertical slip rate of the Eastern boundary fault of the Takada plain is 0.9 mm/y and has potential to produce M7.2 earthquake (AIST, 2006). For shallow structure, we obtained CMP-seismic reflection data from a 7-km-long seismic line, using 541 channels of off-line recorders. Seismic source was an Envirovibe (IVI). Receiver and shot intervals are 12.5 m and seismic signals were recorded by fixed channels. Shallow seismic data were acquired as a piggy-bag project of 70 km-long onshore-offshore deep seismic profiling. High-resolution seismic section portrays the emergent thrust, dipping to the east at about 30 degrees. The hanging wall consist Pliocene interbedded mudstone and sandstone and deeper extension of the thrust can be traced down to the Miocene mudstone of the Teradoamri Formation as a low-angle fault. In the Niigata basin, the lower part of the Teradomari Formation is known as over pressured mudstone and shallow detachments are commonly developed in this unit. Based on the deep seismic section, including velocity profile obtained by refraction tomography, deep sited fault does not connect to the shallow active fault directly.

  13. Toxicity of ionic liquids: database and prediction via quantitative structure-activity relationship method.

    PubMed

    Zhao, Yongsheng; Zhao, Jihong; Huang, Ying; Zhou, Qing; Zhang, Xiangping; Zhang, Suojiang

    2014-08-15

    A comprehensive database on toxicity of ionic liquids (ILs) is established. The database includes over 4000 pieces of data. Based on the database, the relationship between IL's structure and its toxicity has been analyzed qualitatively. Furthermore, Quantitative Structure-Activity relationships (QSAR) model is conducted to predict the toxicities (EC50 values) of various ILs toward the Leukemia rat cell line IPC-81. Four parameters selected by the heuristic method (HM) are used to perform the studies of multiple linear regression (MLR) and support vector machine (SVM). The squared correlation coefficient (R(2)) and the root mean square error (RMSE) of training sets by two QSAR models are 0.918 and 0.959, 0.258 and 0.179, respectively. The prediction R(2) and RMSE of QSAR test sets by MLR model are 0.892 and 0.329, by SVM model are 0.958 and 0.234, respectively. The nonlinear model developed by SVM algorithm is much outperformed MLR, which indicates that SVM model is more reliable in the prediction of toxicity of ILs. This study shows that increasing the relative number of O atoms of molecules leads to decrease in the toxicity of ILs.

  14. Solar system fault detection

    NASA Astrophysics Data System (ADS)

    Farrington, R. B.; Pruett, J. C., Jr.

    1984-05-01

    A fault detecting apparatus and method are provided for use with an active solar system. The apparatus provides an indication as to whether one or more predetermined faults have occurred in the solar system. The apparatus includes a plurality of sensors, each sensor being used in determining whether a predetermined condition is present. The outputs of the sensors are combined in a pre-established manner in accordance with the kind of predetermined faults to be detected. Indicators communicate with the outputs generated by combing the sensor outputs to give the user of the solar system and the apparatus an indication as to whether a predetermined fault has occurred. Upon detection and indication of any predetermined fault, the user can take appropriate corrective action so that the overall reliability and efficiency of the active solar system are increased.

  15. Solar system fault detection

    DOEpatents

    Farrington, Robert B.; Pruett, Jr., James C.

    1986-01-01

    A fault detecting apparatus and method are provided for use with an active solar system. The apparatus provides an indication as to whether one or more predetermined faults have occurred in the solar system. The apparatus includes a plurality of sensors, each sensor being used in determining whether a predetermined condition is present. The outputs of the sensors are combined in a pre-established manner in accordance with the kind of predetermined faults to be detected. Indicators communicate with the outputs generated by combining the sensor outputs to give the user of the solar system and the apparatus an indication as to whether a predetermined fault has occurred. Upon detection and indication of any predetermined fault, the user can take appropriate corrective action so that the overall reliability and efficiency of the active solar system are increased.

  16. Solar system fault detection

    DOEpatents

    Farrington, R.B.; Pruett, J.C. Jr.

    1984-05-14

    A fault detecting apparatus and method are provided for use with an active solar system. The apparatus provides an indication as to whether one or more predetermined faults have occurred in the solar system. The apparatus includes a plurality of sensors, each sensor being used in determining whether a predetermined condition is present. The outputs of the sensors are combined in a pre-established manner in accordance with the kind of predetermined faults to be detected. Indicators communicate with the outputs generated by combining the sensor outputs to give the user of the solar system and the apparatus an indication as to whether a predetermined fault has occurred. Upon detection and indication of any predetermined fault, the user can take appropriate corrective action so that the overall reliability and efficiency of the active solar system are increased.

  17. The INFN-CNAF Tier-1 GEMSS Mass Storage System and database facility activity

    NASA Astrophysics Data System (ADS)

    Ricci, Pier Paolo; Cavalli, Alessandro; Dell'Agnello, Luca; Favaro, Matteo; Gregori, Daniele; Prosperini, Andrea; Pezzi, Michele; Sapunenko, Vladimir; Zizzi, Giovanni; Vagnoni, Vincenzo

    2015-05-01

    The consolidation of Mass Storage services at the INFN-CNAF Tier1 Storage department that has occurred during the last 5 years, resulted in a reliable, high performance and moderately easy-to-manage facility that provides data access, archive, backup and database services to several different use cases. At present, the GEMSS Mass Storage System, developed and installed at CNAF and based upon an integration between the IBM GPFS parallel filesystem and the Tivoli Storage Manager (TSM) tape management software, is one of the largest hierarchical storage sites in Europe. It provides storage resources for about 12% of LHC data, as well as for data of other non-LHC experiments. Files are accessed using standard SRM Grid services provided by the Storage Resource Manager (StoRM), also developed at CNAF. Data access is also provided by XRootD and HTTP/WebDaV endpoints. Besides these services, an Oracle database facility is in production characterized by an effective level of parallelism, redundancy and availability. This facility is running databases for storing and accessing relational data objects and for providing database services to the currently active use cases. It takes advantage of several Oracle technologies, like Real Application Cluster (RAC), Automatic Storage Manager (ASM) and Enterprise Manager centralized management tools, together with other technologies for performance optimization, ease of management and downtime reduction. The aim of the present paper is to illustrate the state-of-the-art of the INFN-CNAF Tier1 Storage department infrastructures and software services, and to give a brief outlook to forthcoming projects. A description of the administrative, monitoring and problem-tracking tools that play a primary role in managing the whole storage framework is also given.

  18. Active Fault Deformation Along the South Boundary of the Western Transverse Ranges Province, Point Dume to the Northern Channel Islands, Southern California

    NASA Astrophysics Data System (ADS)

    Fisher, M. A.; Langenheim, V. E.; Sorlien, C. C.; Nicholson, C.; Sliter, R. W.

    2005-12-01

    The regional fault system forming the south boundary of the Western Transverse Ranges Province (WTRP) extends for about 200 km, from near the city of Los Angeles westward along the south flank of the Santa Monica Mountains and through the northern Channel Islands. Multichannel seismic-reflection data show that fault strands within the province-bounding system are active, and some have dip-slip displacements measured in kilometers. The left-oblique Dume fault is active and shows large displacement as far west as Sycamore knoll, but farther west, the fault tip and a superjacent fold are deeply buried. Thus during future earthquakes, the structural transition near the knoll could represent a boundary between earthquake-rupture segments. The east-west province-bounding fault system strikes at a high angle across and terminates the northwest-trending faults, basins and ridges of the California Continental Borderland. Borderland structures considered here form the western limit of intense middle Miocene oblique extension that accompanied rotation of the WTRP. The transition between extended and intact crust lies along the northwest-trending Santa Cruz-Catalina and Santa Rosa-Cortes Ridges. After the Miocene rotation, structures within these ridges became involved in regional transpression, such that northwestward along the Santa Cruz-Catalina Ridge, thrust faulting becomes increasingly more intense, and adjacent to the province boundary, thrust-faulted rocks completely override Miocene extensional structures. In contrast, rocks making up the Santa Rosa-Cortez Ridge are little deformed. The difference in deformation of the two ridges could result from a combination of: 1) eastward crustal thinning and consequent weakening that developed during the Miocene extension; 2) a difference in horizontal strain across the right-slip San Clemente fault near its termination at the WTRP boundary; 3) strain partitioning along this boundary; and 4) a contrast in bulk rheological

  19. Fault finder

    DOEpatents

    Bunch, Richard H.

    1986-01-01

    A fault finder for locating faults along a high voltage electrical transmission line. Real time monitoring of background noise and improved filtering of input signals is used to identify the occurrence of a fault. A fault is detected at both a master and remote unit spaced along the line. A master clock synchronizes operation of a similar clock at the remote unit. Both units include modulator and demodulator circuits for transmission of clock signals and data. All data is received at the master unit for processing to determine an accurate fault distance calculation.

  20. Holocene Activity of the Enriquillo-Plantain Garden Fault in Lake Enriquillo Derived from Seismic Stratigraphy

    NASA Astrophysics Data System (ADS)

    Rios, J. K.; McHugh, C. M.; Hornbach, M. J.; Mann, P.; Wright, V. D.; Gurung, D.

    2013-12-01

    The Enriquillo-Plantain-Garden fault zone (EPGF) crosses Lake Enriquillo (LE) in the Dominican Republic and extends E-W across the southern peninsula of Haiti, south of the Baie de Port au Prince (BPP). Seismic stratigraphic studies of CHIRP high-resolution subbottom profiles calibrated to ages obtained from sediment cores and previous coral reef studies provide a Holocene record of relative sea level rise into the BPB and LE and a time frame for understanding tectonics of the EPGF. The BPP is 20 km wide, 20 km long, 150 m deep, and surrounded by coral reefs at water depths of 30 m. Three seismic units were identified: Unit 1: stepped terraces 5-10 m high. Laminated strata onlaps the terraces. This unit possibly represents Marine Isotope Stages 6 and 5, but has not been dated. Unit 2: laminated strata, thicker than 10 m and dated near its top at 22 ka BP. The microfossil assemblages reveal that during the latest Pleistocene sea level lowstand the BPP had a restricted connection with the global ocean. Few well-preserved marine microfossils are present and mostly are reworked. Geochemical analyses reveal that the laminated sediments were deposited during wet periods (>Si, Al wt %, Cu ppm) and dry periods (>Ca wt %). Unit 3: acoustically transparent, ~10 m thick, dated near its base and top at 14 ka BP and 2 ka BP, respectively. This unit represents the Holocene initiation of sea level rise and high stand containing well-preserved marine fossils. At ~9.5 ka BP planktonic foraminifers become abundant implying deepening of marine waters. Lake Enriquillo is 127 km east of the BPP. It is 15 km wide, 40 km long and 45 m deep. CHIRP subbottom profiles penetrated ~30 m below the lake floor. Four main acoustic units were identified: Unit 1: deformed basement with steeply dipping and folded beds. Based on land studies this unit is likely Plio-Pleistocene in age. Unit 2: laminated strata. Ages from coral reefs and deformed strata on land indicate this unit is likely pre-20 ka

  1. Preliminary Results on the Mechanics of the Active Mai'iu Low Angle Normal Fault (Dayman Dome), Woodlark Rift, SE Papua New Guinea

    NASA Astrophysics Data System (ADS)

    Little, T. A.; Boulton, C. J.; Mizera, M.; Webber, S. M.; Oesterle, J.; Ellis, S. M.; Norton, K. P.; Wallace, L. M.; Biemiller, J.

    2015-12-01

    Rapid slip on the Mai'iu low-angle normal fault (LANF) has exhumed a smooth, corrugated fault surface contiguous for >24 km up-dip, rising from near sea level to ~2900 m. The fault emerges from the ground dipping ~21° N and flattens over the crest of the dome to dip south. Geomorphic analysis reveals a progressive back-tilting of the surface during exhumation accompanied by cross-cutting antithetic-sense high-angle faults—features that we attribute to "rolling-hinge" deformation of a once more steeply-dipping fault. Near the scarp base, the footwall exposes mafic mylonites that deformed at ~400-450°C. The younger Mai'iu fault cross-cuts this ductile mylonite zone, with most brittle slip being localized into a ~20 cm-thick, gouge-filled core. Near the range front, active faults bite across both the hangingwall and footwall of the Mai'iu fault and record overprinting across a dying, shallow (<~1 km deep) part of the fault by more optimally oriented, steeper faults. Such depth-dependent locking up of the fault suggests it weakens primarily by friction reduction rather than cohesion loss. Outcrop-scale fractures in the exhumed footwall reflect formation in an Andersonian stress regime. Previous campaign GPS data suggest the fault slips at up to ~1 cm/yr. To improve resolution and test for aseismic creep, we installed 12 GPS sites across the fault trace in 2015. Quantitative XRD indicates the gouges were derived primarily from mafic footwall, containing up to 65% corrensite and saponite. Hydrothermal friction experiments on two gouges from a relict LANF strand were done at varying normal stresses (30-120 MPa), temperatures (50-200oC), and sliding velocities (0.3-100 μm/s). Results reveal very weak frictional strength (μ=0.13-0.15 and 0.20-0.28) and velocity-strengthening behavior conducive to fault creep. At the highest temperatures (T≥150oC) and lowest sliding velocities (<3 μm/s), a transition to velocity-weakening behavior indicates the potential for

  2. Detection of precursory slips on a fault by the quiescence and activation of seismicity relative to the ETAS model and by the anomalous trend of the geodetic time series of distances between GPS stations around the fault

    NASA Astrophysics Data System (ADS)

    Ogata, Y.

    2006-12-01

    This paper is concerned with the detection of precursory slip on a rupturing fault, supported by both seismic and geodetic records. Basically, the detection relies on the principle that, assuming precursory slip on the rupturing fault, the seismic activity around the fault should be enhanced or reduced in the zones where increment of the Coulomb failure stress (CFS) is positive or negative, respectively. However, any occurring event also affects the stress changes in neighboring regions, which can trigger further aftershock clusters. Whereas such stress transfers are too difficult to be computed precisely, due to the unknown complex fault system, the ordinary short-term occurrence rate of earthquakes in a region is easily predicted using the ETAS model of triggering seismicity; and any anomalous seismic activity, such as quiescence and activation, can be quantified by identifying a significant deviation from the predicted rate. Such anomalies are revealed to have occurred during several years leading up to the 2004 Chuetsu Earthquake of M6.8, central Honshu, and also the 2005 Western Fukuoka-Ken-Oki Earthquake of M7.0, Kyushu, Japan. Quiescence and activation in the regions coincided with negative and positive increments of the CFS, respectively, and were probably transferred from possible aseismic slips on the focal fault plane. Such slips are further supported by transient crustal movement around the source preceding the rupture. Time series records of the baseline distances between the permanent GPS stations deviated from the predicted trends, with the deviations consistent with the coseismic horizontal displacements of the stations due to these earthquakes. References Ogata, Y. (2006) Report of the Coordinating Committee for Earthquake Prediction, 76 (to appear, in Japanese).

  3. Fault displacement hazard for strike-slip faults

    USGS Publications Warehouse

    Petersen, M.D.; Dawson, T.E.; Chen, R.; Cao, T.; Wills, C.J.; Schwartz, D.P.; Frankel, A.D.

    2011-01-01

    In this paper we present a methodology, data, and regression equations for calculating the fault rupture hazard at sites near steeply dipping, strike-slip faults. We collected and digitized on-fault and off-fault displacement data for 9 global strikeslip earthquakes ranging from moment magnitude M 6.5 to M 7.6 and supplemented these with displacements from 13 global earthquakes compiled byWesnousky (2008), who considers events up to M 7.9. Displacements on the primary fault fall off at the rupture ends and are often measured in meters, while displacements on secondary (offfault) or distributed faults may measure a few centimeters up to more than a meter and decay with distance from the rupture. Probability of earthquake rupture is less than 15% for cells 200 m??200 m and is less than 2% for 25 m??25 m cells at distances greater than 200mfrom the primary-fault rupture. Therefore, the hazard for off-fault ruptures is much lower than the hazard near the fault. Our data indicate that rupture displacements up to 35cm can be triggered on adjacent faults at distances out to 10kmor more from the primary-fault rupture. An example calculation shows that, for an active fault which has repeated large earthquakes every few hundred years, fault rupture hazard analysis should be an important consideration in the design of structures or lifelines that are located near the principal fault, within about 150 m of well-mapped active faults with a simple trace and within 300 m of faults with poorly defined or complex traces.

  4. Interaction between the North-West Sahara Aquifer and the seismically active intraplate Hun Graben Fault system, Libya

    NASA Astrophysics Data System (ADS)

    Hamling, I. J.; Aoudia, A.

    2011-12-01

    The North-West Sahara Aquifer System (NWSAS) covers an area of ~1 million km2 spanning the countries of Algeria, Tunisia and Libya. The system is composed of two main aquifers, the Complexe Terminal (CT) and the deeper Continental Intercalaire (CI). Over the last ~40 years these aquifers have been increasingly exploited in order to provide water to these countries. There are estimated to be ~7000 drill sites across the aquifer, 4000 in Algeria, 2000 in Tunisia and a further ~1000 in Libya. Land subsidence, caused by anthropogenic activities such as groundwater pumping, is a global problem and has been observed in a number of places around the world. Here we investigate fault controlled subsidence related to the extraction of water in North Western Libya. Located ~600 km south east of Tripoli, the Hun Graben separates the Sirte Basin to the east from the Hamada al Hamra Platform to the west and lies on the eastern boundary of the North-West Sahara Aquifer System (NWSAS). The graben is composed of two border faults extending for ~130 km from the town of Hun to the north west. These faults, bounding the eastern and western margins of the graben, are known to be seismically active and were responsible for the magnitude 7.1 earthquake in 1935. Due to the lack of ground based instrumentation, there are currently no estimates of slip along these structures. Here we use ERS and Envisat SAR images acquired over the last 20 years and form a number of interferograms to study interseismic strain accumulation along these structures. Satellite Radar Interferometry (InSAR) is a widely used technique for monitoring deformation of the Earth's surface. By differencing the phase from two radar images acquired at different times, maps of range change between the radar and ground can be obtained with millimetre precision. Our analysis over the graben suggests that neither of the two border faults are actively deforming and therefore the causes of intraplate large earthquakes such as

  5. The Lawanopo Fault, central Sulawesi, East Indonesia

    NASA Astrophysics Data System (ADS)

    Natawidjaja, Danny Hilman; Daryono, Mudrik R.

    2015-04-01

    The dominant tectonic-force factor in the Sulawesi Island is the westward Bangga-Sula microplate tectonic intrusion, driven by the 12 mm/year westward motion of the Pacific Plate relative to Eurasia. This tectonic intrusion are accommodated by a series of major left-lateral strike-slip fault zones including Sorong Fault, Sula-Sorong Fault, Matano Fault, Palukoro Fault, and Lawanopo Fault zones. The Lawanopo fault has been considered as an active left-lateral strike-slip fault. The natural exposures of the Lawanopo Fault are clear, marked by the breaks and liniemants of topography along the fault line, and also it serves as a tectonic boundary between the different rock assemblages. Inpections of IFSAR 5m-grid DEM and field checks show that the fault traces are visible by lineaments of topographical slope breaks, linear ridges and stream valleys, ridge neckings, and they are also associated with hydrothermal deposits and hot springs. These are characteristics of young fault, so their morphological expressions can be seen still. However, fault scarps and other morpho-tectonic features appear to have been diffused by erosions and young sediment depositions. No fresh fault scarps, stream deflections or offsets, or any influences of fault movements on recent landscapes are observed associated with fault traces. Hence, the faults do not show any evidence of recent activity. This is consistent with lack of seismicity on the fault.

  6. Using 10Be cosmogenic surface exposure dating to determine the evolution of the Purgatorio active fault in the Andean forearc, southern Peru

    NASA Astrophysics Data System (ADS)

    Carlos, Benavente; Swann, Zerathe; Laurence, Audin; Fabrizio, Delgado; Marianne, Saillard; Sarah, Hall R.; Aster Team

    2015-04-01

    Active transpressive deformation has been occurring along the Andean hyperarid forearc for the last 3 Myrs but many of these faults are still not described even if able to produce large damaging earthquakes. Active faulting along the northern part of the Arica Bend can be recognized due to the presence of well-preserved and sharp fault scarps indicating recent surface slip. During the Mio-Pliocene, deposition within the forearc continental basins resulted in the formation of vast fan deposits and conglomerates of the Moquegua Formation, which can be considered as bedrock in this exposure study (~45-4 Ma; Tosdal et al., 1984; Sebrier et al., 1988a; Roperch et al., 2006). The typical vertical Purgatorio fault scarps offset both the Moquegua bedrock and several younger geomorphic features associated with <300kyrs climatic and 400 years old volcanic extreme events. This study focus on quantifying slip rate variations in time along a 5-meters high vertical fault scarp to understand how the fault is evolving. These results are achieved via surface exposure dating of the sampled seismically broken cobbolds of the Moquegua formation outcroping vertically along the fault scarp. These samples are well-suited to the application of in situ produced cosmogenic radionuclides for surface exposure dating, as the hyperarid region has extremely low erosion rates. We sampled the scarp away from any significant drainage so as to avoid possibly disturbed areas. The sampling did involve extracting quarzite conglomeratic material along the bedrock scarp and on the upper surrounding crests. The aim has been to measure Berylium-20 TCN (Terrestrial in situ Cosmogenic Nuclides) concentrations to determine exposure age as a function of height on the scarp. This has been successfully employed on one scarp in Italy based on Chlorine-36 TCN (Palumbo et al., 2004). However, slow faults behaviour remains unclear and more contributions are needed. Quaternary activity of the Purgatorio fault system

  7. Earthquakes and faults in southern California (1970-2010)

    USGS Publications Warehouse

    Sleeter, Benjamin M.; Calzia, James P.; Walter, Stephen R.

    2012-01-01

    The map depicts both active and inactive faults and earthquakes magnitude 1.5 to 7.3 in southern California (1970–2010). The bathymetry was generated from digital files from the California Department of Fish And Game, Marine Region, Coastal Bathymetry Project. Elevation data are from the U.S. Geological Survey National Elevation Database. Landsat satellite image is from fourteen Landsat 5 Thematic Mapper scenes collected between 2009 and 2010. Fault data are reproduced with permission from 2006 California Geological Survey and U.S. Geological Survey data. The earthquake data are from the U.S. Geological Survey National Earthquake Information Center.

  8. Identifying Active Faults in Northeast North America Using Hypocenters and Multiscale Edge Wavelet Analyses of Potential Fields

    NASA Astrophysics Data System (ADS)

    Carpenter, K.; Horowitz, F.; Ebinger, C. J.; Navarrete, L. C.; Diaz-Etchevehere, D.

    2015-12-01

    Multiscale edge Poisson wavelet analyses of potential field data ("worms") have a physical interpretation as the locations of lateral boundaries in a source distribution that exactly generates the observed field. The worm technique is therefore well-suited to analyses of crustal-scale stuctures that could be reactivated by tectonic stress or by fluid injection processes, providing new tools to analyze existing continental-scale data sets. Northeastern North America (US, Canada) hosts potentially damaging intraplate earthquakes, yet many of the Proterozoic structures are covered by thick sedimentary sequences or dense vegetation, and crustal structure is relatively poorly known.For the purpose of extending basement structure beneath the Appalachian basin and establishing a consistent regional basis for comparison, we use worms to identify steeply dipping structures in compiled gravity and magnetic anomaly data sets. We compare results to intraplate earthquake locations to assess seismic hazards. Clearly, not all locations of lateral boundaries are faults, and we do not expect all faults to have shown activity in the ~50 years of seismic records available. However, proximity statistics between hypocenters and worms are of interest since they assist in the identification and location of a subset of potentially active faults. We compare structures of lateral mass-density or magnetization contrast with locations of earthquake hypocenters cataloged from the ISC, the NEIC, and the ANF from the EarthScope Transportable Array. We develop a GIS based method for calculating hypocenter/worm proximity, and we will show statistics and maps from this method for the region at the meeting.

  9. Definition and Paleoseismology of the Active, Left-Lateral Enriquillo-Plantain Garden Fault Zone Based on High-Resolution Chirp Profiles: Lakes Azuey and Mirogoane, Haiti

    NASA Astrophysics Data System (ADS)

    Wang, J.; Mann, P.; von Lignau, A. V.

    2014-12-01

    In July 2014, we obtained a total of 94 km of high-resolution Chirp profiles from the 129 km2, brackish Lake Azuey and 37 km of profiles from the 14 km2, fresh water Lake Mirogoane that both straddle the active trace of the Enriquillo-Plantain Garden fault zone (EPGFZ) of Haiti. 80% of the grid on Azuey and 85% on Mirogoane was dedicated to north-south profiles of the EPGFZ. In Azuey we defined the linear and east-west-striking fault trace in deformed Holocene sediments along with its landfalls west of Lake Azuey in Haiti and east of Lake Azuey in the Dominican Republic. All profiles showed the fault to be a sub-vertical flower structure whose active traces could be traced on Chirp data to a depth of 30 m below the lake floor. Previous workers have suggested that this fault ruptured during a large November, 1751, earthquake with a parallel and elongate felt zone. We hypothesize the most recent break of the fault several meters below the lake floor to have formed during the 1751 event but plan a coring program to precisely constrain the timing of historical and prehistorical events based on syn-faulting colluvial wedges observed on Chirp profiles. Our survey of Mirogoane confirmed its rhomboidal pull-apart structure with the basin center at a depth of 42-8 m making this basin the deepest lake in the Caribbean region. Deformational features include active folds at the lake bottom, large oblique-slip normal faults at an angle to the bounding east-west faults, and 30 m of recognizable stratigraphy. The 7 m of Holocene cored in the basin center in 1988 is observed to be highly deformed and locally folded and overlies with angular unconformity a well stratified and more folded lower basinal unit. Historical events are proposed to have ruptured on or near this segment of the EPGFZ in 1701 and 1770.

  10. Structural Analysis of Recent and Active Faults and Regional State of Stress in the Epicentral Area of the 1978 Thessaloniki Earthquakes (northern Greece)

    NASA Astrophysics Data System (ADS)

    Mercier, Jacques-Louis; Carey-Gailhardis, Evelyne; Mouyaris, Nicolas; Simeakis, Konstantinos; Roundoyannis, Theodora; Anghelidhis, Christos

    1983-12-01

    During spring and summer 1978, Macedonia (Greece) suffered damaging seismic activity. During the two main shocks which occurred on May 23 (Mb = 5.7) and June 20 (Mb = 6.1), seismic open cracks and faults were formed in the epicentral area, 25 km NNE from Thessaloniki. They have been mapped and their kinematics analyzed. These studies have shown that they result from the reactivation of existing faults of Pleistocene, Recent, and historical age and that the crust is stretching along a N-S to NNE-SSW direction in that part of the North Aegean. Principal stress directions have been computed from the slip vectors measured on recent neotectonic faults and seismic cracks and faults, this computation utilizing a simple mechanical model (homogeneous deformation through the addition of small and independent displacements of rigid blocks in a highly fractured body). A striking feature of this analysis is that the tensional directions σ3 deduced from seismic faulting and from recent neotectonic faulting are nearly the same. They are compatible with the regional tension axis deduced from focal mechanisms of North Aegean and with the focal mechanisms of the 1978 Thessaloniki main shocks. They are also compatible with in situ stress measurements in this region. Studies of superficial seismic faulting strongly support previous assumptions proposed from aftershock distribution: the 1978 Thessaloniki earthquakes resulted from reactivation of several different faults situated within the same NE dipping fault zone of Upper Eocene-Lower Oligocene age (and older) separating the Serbo-Macedonian Massif from the Peonias (East Vardar) zone.

  11. A database about the tornadic activity in Catalonia (NE Spain) since 1994

    NASA Astrophysics Data System (ADS)

    Morales, M. E.; Arús, J.; Llasat, M. C.; Castán, S.

    2009-09-01

    Although tornadic activity is not the most important hazard in Spain, the damages that tornadoes and downburst generate are considerable in urban areas, giving place in some occasions to casualties. In Spain, the oldest systematic works collecting data about tornadoes, refer to the Balearic Islands, although some series about tornadoes in Spain have also been collected and analysed (Gayà, 2005). These series shows a positive increase that is probably more related to a change in the perception level of the population than to climatic change. In some occasions it is difficult to separate the damages produced by the tornado itself from those produced by other associated hazards like heavy rains, hail or a wind storms. It was the case of the September 2006 event, in which flash floods and tornadoes were recorded. In the same sense in some occasions, damages produced by a downsburt are confused with those that produced by a tornado. Having in mind all these facts, having a good systematic data base about tornadoes is necessary, before to obtain some conclusions not enough justified. This kind of database is not easy to obtain, because of it requires to have detailed information about damages, meteorological observations and testimonies that has to be filtered by a good quality control. After a general presentation about tornadoes and downsbursts in Mediterranean Region, this contribution presents the database that have affected Catalonia during the period 1994-2009, starting with the tornado recorded on the Espluga de Francolí the 31 August 1994.This database has been built in basis to the AEMET information, the Consorcio de Compensación de Seguros (the insurance company of Spain for natural disasters), the newspapers and field visits to the affected places.

  12. Were Holocene large slumps in Lake Geneva off the city of Lausanne caused by fault activity?

    NASA Astrophysics Data System (ADS)

    Correia Demand, Jehanne; Marillier, François; Kremer, Katrina; Girardclos, Stéphanie

    2014-05-01

    Lake Geneva is set in an area where glacier advances and retreats have carved Tertiary Molasse rocks in front of the Alpine units. Glacial and lacustrine sediments have accumulated in the lake on top of the Molasse. Within Holocene sedimentary layers, seismic studies in the central part of Lake Geneva ("Grand-Lac") have shown the presence of several mass transport deposits (MTD). A large one, MTD A, is observed off the city of Lausanne. The depth of the associated failure scars (100 m water depth), its volume (~ 0.13 km3), and the occurrence of other smaller MTDs that were possibly co-deposited with MTD A point to the occurrence of a major slide event in the lake, most likely associated with an earthquake. Based on 14C dating, the sediment age model for MTD A gives an age interval of 1865-1608 BC (Kremer et al. 2014). To resolve the details of the MTDs off Lausanne, and to better understand its geological context different seismic systems were used. These were a 3.5 KHz pinger with a theoretical vertical resolution of 0.15 m and a multichannel system with water-gun or air-gun seismic sources with vertical resolution of 0.6 m and 1.1 m, respectively. After a first pass processing, the multi-channel data were reprocessed in order to take into account the shape of the streamer in the water and to enhance the results of migration. In addition to typical seismic images of MTDs observed in other alpine lakes such as chaotic or transparent seismic character between well-organized reflections, two intriguing positive water-bottom topographic features associated with apparent sub-vertical offsets are revealed by the seismic data. They are located in the near vicinity of the depot centers of the MTDs and conspicuously located near faults in the Tertiary Molasse. These are thrust faults that are offset by small strike-slip faults, and we suggest that the positive topographic features are linked to a compressive component within the sediments due to displacements along these

  13. Transient shortening strain across an active extensional fault, Basin and Range Province, north-central Nevada, USA, based on geodetic and paleoseismologic data.

    NASA Astrophysics Data System (ADS)

    Friedrich, A.; Wernicke, B.; Lee, J.; Sieh, K.

    2003-04-01

    The northern Basin and Range province is one of the largest continental extensional regions on earth. At 40 degrees N latitude, the province is 800 km wide and consists of 15 and 20 N-S striking normal faults. These faults accommodated mainly east-west directed extension of tens of kilometers since Mid-Miocene time and recent geodetic surveys show that extension is still active today at a rate of ~1.5 cm/yr across the province (e.g., Bennett et al. 2000; Thatcher et al. 1999). The distribution of this geodetically measurable strain accumulation within the province, however, contradicts geologic observations across some of the active normal faults. For example, coordinated geologic and geodetic measurements across the Crescent Valley fault (CVF), north-central Nevada, reveal a profound mismatch in deformation rates. Since 1996, the two ranges on either side of the CVF have been moving toward each other at ca. 2 mm/yr, indicating shortening. In contrast, new reconnaissance mapping and paleoseismological analyses along the CVF also indicate that this fault is one of the more active normal faults of the Basin and Range province. The 50 km long Cortez Mountains range front is characterized by relief of up to 1.3 km, steep (up to 36 degrees) triangular facets, and young (late Pleistocene to late Holocene) alluvial fans cut by normal fault scarps. Vertical displacement across the CVF is ca. 3 km; since 15 Ma the average long-term vertical displacement rate is ca. 0.2 mm/yr. Topographic profiling shows that fault scarps, 2-7 m high, are the result of a single rupture event and cut late Holocene alluvial fans. A trench across a faulted alluvial fan at Fourmile Canyon reveals a vertical displacement of 4.5 m distributed across two normal faults. 14C analyses on charcoal from a buried offset surface in the hanging wall of the trench and from the base of the overlying colluvial wedge tightly bracket the age of the most recent earthquake to between 2.8 +- 0.1 and 2.7 +- 0.1 ka

  14. Multi-component Magnetization Of The Late Pliocene Pyroclastic Flow Deposit In Central Japan, Indicating Early Early Pleistocene Fault Activity

    NASA Astrophysics Data System (ADS)

    Ueki, T.; Yamazaki, T.; Funaki, M.; Hoshi, H.

    2003-12-01

    The Late Pliocene Ichiuda Welded Tuff Bed in central Japan acquired three magnetization components. All of primary reverse intermediate temperature component, and secondary normal low and high temperature components show positive fold tests, indicating that fault-related folding structure postdated the Olduvai normal subchron. The northern segment of Itoigawa-Shizuoka Tectonic Line that bounds the North American and Eurasian Plates in central Japan, comprises the geological Otari-Nakayama and active Kamishiro faults. The Ichiuda Welded Tuff Bed intruded by the 2.1 Ma Taro-yama Andesite is subjected to the NE-SW trending folding structure adjacent to the Otari-Nakayama fault. PAFD and PThD were performed to the drilled samples of Taro-yama Andesite and the Ichiuda Welded Tuff Bed at three and five sites on both limbs of the syncline, respectively. Positive fold test for the tilt-corrected site-mean directions of the andesite indicates prefolding magnetization. The fresh welded tuff bed at one site yields similar reverse direction. Whereas the greenly altered beds at four sites shows normal tilt-corrected site-mean directions by PAFD, and following three temperature-dependent directional components by PThD: normal below 350 degree, reverse from 350 to 530 degree, and normal above 530 degree, all which show positive fold test. IRM acquisition, thermal demagnetization of three orthogonal IRM, thermomagnetic analysis with VSM, and low temperature magnetization measurements with MPMS indicate that the Ichiuda Welded Tuff Bed with single and three magnetization components contains titanomagnetites, and both titanomagnetites and magnetite, respectively. Magnetization of the Taro-yama Andesite is dominated by titanomagnetites under high temperature oxidation state and minor proportion of titanomaghemites. The Taro-yama Andesite and the Ichiuda Welded Tuff Bed exhibit primary reverse magnetism corresponding to the Matsuyama Chron. The Ichiuda Welded Tuff Bed additionally

  15. The Active Mai'iu Low Angle Normal Fault, Woodlark Rift: Spatial and Temporal Slip Distributions, and Rider Block Abandonment Chronology.

    NASA Astrophysics Data System (ADS)

    Webber, S. M.; Little, T.; Norton, K. P.; Mizera, M.; Oesterle, J.; Ellis, S. M.

    2015-12-01

    Low-angle normal faults (LANFs) have induced debate due to their apparent non-Andersonian behavior and lack of significant seismicity associated with slip. Dipping ~21°, the Mai'iu Fault, Woodlark Rift is an active, rapidly slipping LANF located at the transition between continental extension and seafloor spreading. Based on campaign GPS data [Wallace et al., 2014] the Mai'iu Fault is thought to slip at 7-9 mm/yr, accommodating a large fraction of total basinal extension, although it is uncertain whether slip is seismic or aseismic. Surface geomorphology indicates that the fault scarp is not significantly eroded despite high rainfall and ~3000 m relief. We have obtained 15 rock samples (~5 m spacing) from the lowermost Mai'iu Fault scarp in order to determine Holocene slip rate and style over the last ~10 kyr using cosmogenic 10Be in quartz. This slip direction-parallel profile in exposed bedrock is supported by a suite of soil samples for 10Be analysis, which extend our temporal coverage. We model exposure age data in terms of slip rate and style by identification of discontinuities within the profile. Of particular interest is whether slip is seismic or aseismic. In addition we analyze the structure of conglomeratic strata and abandoned, back-rotated rider blocks in the Mai'iu Fault hanging wall, which record Quaternary splay faulting and tilting in response to sustained LANF slip. 20 quartz pebble samples were obtained from hanging wall conglomerates for the purpose of calculating cosmogenic burial (26Al/10Be) ages. These constrain the chronology of Quaternary hanging wall deformation. High-angle (~50°) faulting competes with LANF slip at <2 km depths, with high-angle faults cutting the main LANF and exposing footwall metabasalt up to 2 km north of the Mai'iu Fault. Past splay faulting is recorded in the progressive back-tilting and folding of the Gwoira rider block in a ~2 km deep depression in the corrugated Mai'iu fault plane. Our results provide new

  16. Identification of promiscuous ene-reductase activity by mining structural databases using active site constellations

    PubMed Central

    Steinkellner, Georg; Gruber, Christian C.; Pavkov-Keller, Tea; Binter, Alexandra; Steiner, Kerstin; Winkler, Christoph; Łyskowski, Andrzej; Schwamberger, Orsolya; Oberer, Monika; Schwab, Helmut; Faber, Kurt; Macheroux, Peter; Gruber, Karl

    2014-01-01

    The exploitation of catalytic promiscuity and the application of de novo design have recently opened the access to novel, non-natural enzymatic activities. Here we describe a structural bioinformatic method for predicting catalytic activities of enzymes based on three-dimensional constellations of functional groups in active sites (‘catalophores’). As a proof-of-concept we identify two enzymes with predicted promiscuous ene-reductase activity (reduction of activated C–C double bonds) and compare them with known ene-reductases, that is, members of the Old Yellow Enzyme family. Despite completely different amino acid sequences, overall structures and protein folds, high-resolution crystal structures reveal equivalent binding modes of typical Old Yellow Enzyme substrates and ligands. Biochemical and biocatalytic data show that the two enzymes indeed possess ene-reductase activity and reveal an inverted stereopreference compared with Old Yellow Enzymes for some substrates. This method could thus be a tool for the identification of viable starting points for the development and engineering of novel biocatalysts. PMID:24954722

  17. The U.S. Geological Survey mapping and cartographic database activities, 2006-2010

    USGS Publications Warehouse

    Craun, Kari J.; Donnelly, John P.; Allord, Gregory J.

    2011-01-01

    The U.S. Geological Survey (USGS) began systematic topographic mapping of the United States in the 1880s, beginning with scales of 1:250,000 and 1:125,000 in support of geological mapping. Responding to the need for higher resolution and more detail, the 1:62,500-scale, 15-minute, topographic map series was begun in the beginning of the 20th century. Finally, in the 1950s the USGS adopted the 1:24,000-scale, 7.5-minute topographic map series to portray even more detail, completing the coverage of the conterminous 48 states of the United States with this series in 1992. In 2001, the USGS developed the vision and concept of The National Map, a topographic database for the 21st century and the source for a new generation of topographic maps (http://nationalmap.gov/). In 2008, the initial production of those maps began with a 1:24,000-scale digital product. In a separate, but related project, the USGS began scanning the existing inventory of historical topographic maps at all scales to accompany the new topographic maps. The USGS also had developed a digital database of The National Atlas of the United States. The digital version of Atlas is now Web-available and supports a mapping engine for small scale maps of the United States and North America. These three efforts define topographic mapping activities of the USGS during the last few years and are discussed below.

  18. BaAMPs: the database of biofilm-active antimicrobial peptides.

    PubMed

    Di Luca, Mariagrazia; Maccari, Giuseppe; Maisetta, Giuseppantonio; Batoni, Giovanna

    2015-01-01

    Antimicrobial peptides (AMPs) are increasingly being considered as novel agents against biofilms. The development of AMP-based anti-biofilm strategies strongly relies on the design of sequences optimized to target specific features of sessile bacterial/fungal communities. Although several AMP databases have been created and successfully exploited for AMP design, all of these use data collected on peptides tested against planktonic microorganisms. Here, an open-access, manually curated database of AMPs specifically assayed against microbial biofilms (BaAMPs) is presented for the first time. In collecting relevant data from the literature an effort was made to define a minimal standard set of essential information including, for each AMP, the microbial species and biofilm conditions against which it was tested, and the specific assay and peptide concentration used. The availability of these data in an organized framework will benefit anti-biofilm research and support the design of novel molecules active against biofilm. BaAMPs is accessible at http://www.baamps.it. PMID:25760404

  19. A novel meta-analytic approach: mining frequent co-activation patterns in neuroimaging databases.

    PubMed

    Caspers, Julian; Zilles, Karl; Beierle, Christoph; Rottschy, Claudia; Eickhoff, Simon B

    2014-04-15

    In recent years, coordinate-based meta-analyses have become a powerful and widely used tool to study co-activity across neuroimaging experiments, a development that was supported by the emergence of large-scale neuroimaging databases like BrainMap. However, the evaluation of co-activation patterns is constrained by the fact that previous coordinate-based meta-analysis techniques like Activation Likelihood Estimation (ALE) and Multilevel Kernel Density Analysis (MKDA) reveal all brain regions that show convergent activity within a dataset without taking into account actual within-experiment co-occurrence patterns. To overcome this issue we here propose a novel meta-analytic approach named PaMiNI that utilizes a combination of two well-established data-mining techniques, Gaussian mixture modeling and the Apriori algorithm. By this, PaMiNI enables a data-driven detection of frequent co-activation patterns within neuroimaging datasets. The feasibility of the method is demonstrated by means of several analyses on simulated data as well as a real application. The analyses of the simulated data show that PaMiNI identifies the brain regions underlying the simulated activation foci and perfectly separates the co-activation patterns of the experiments in the simulations. Furthermore, PaMiNI still yields good results when activation foci of distinct brain regions become closer together or if they are non-Gaussian distributed. For the further evaluation, a real dataset on working memory experiments is used, which was previously examined in an ALE meta-analysis and hence allows a cross-validation of both methods. In this latter analysis, PaMiNI revealed a fronto-parietal "core" network of working memory and furthermore indicates a left-lateralization in this network. Finally, to encourage a widespread usage of this new method, the PaMiNI approach was implemented into a publicly available software system. PMID:24365675

  20. Fault Tree Analysis: A Bibliography

    NASA Technical Reports Server (NTRS)

    2000-01-01

    Fault tree analysis is a top-down approach to the identification of process hazards. It is as one of the best methods for systematically identifying an graphically displaying the many ways some things can go wrong. This bibliography references 266 documents in the NASA STI Database that contain the major concepts. fault tree analysis, risk an probability theory, in the basic index or major subject terms. An abstract is included with most citations, followed by the applicable subject terms.

  1. Uranium concentrations and /sup 234/U//sup 238/U activity ratios in fault-associated groundwater as possible earthquake precursors

    SciTech Connect

    Finkel, R.C.

    1981-05-01

    In order to assess the utility of uranium isotopes as fluid phase earthquake precursors, uranium concentrations and /sup 234/U//sup 238/U activity ratios have been monitored on a monthly or bimonthly basis in water from 24 wells and springs associated with Southern California fault zones. Uranium concentrations vary from 0.002 ppb at Indian Canyon Springs on the San Jacinto fault to 8.3 ppb at Lake Hughes well on the San Andreas fault in the Palmdale area. /sup 234/U//sup 238/U activity ratios vary from 0.88 at Agua Caliente Springs on the Elsinore fault to 5.4 at Niland Slab well on the San Andreas fault in the Imperial Valley. There was one large earthquake in the study area during 1979, the 15 October 1979 M = 6.6 Imperial Valley earthquake. Correlated with this event, uranium concentrations varied by a factor of more than 60 and activity ratios by a factor of 3 at the Niland Slab site, about 70 km from the epicenter. At the other sites monitored, uranium concentrations varied in time, but with no apparent pattern, while uranium activity ratios remained essentially constant throughout the monitoring period.

  2. Glacier ice mass fluctuations and fault instability in tectonically active Southern Alaska

    USGS Publications Warehouse

    Sauber, J.M.; Molnia, B.F.

    2004-01-01

    change during the 1899-1979 time period to calculate the change in the fault stability margin (FSM) prior to the 1979 St. Elias earthquake. Our results suggest that a cumulative decrease in the fault stability margin at seismogenic depths, due to ice wastage over 80 years, was large, up to ???2 MPa. Ice wastage would promote thrust faulting in events such as the 1979 earthquake and subsequent aftershocks.

  3. Present-day Block Motions and Strain Accumulation on Active Faults in the Caribbean

    NASA Astrophysics Data System (ADS)

    Symithe, S. J.; Calais, E.; Freed, A. M.

    2014-12-01

    The quasi-frontal subduction of the north and south American plates under the Lesser Antilles and the left and right lateral strike-slip along the northern and southern margins of the Caribbean plate offer the opportunity to study the transition from subduction to strike-slip between major plates. In addition, the segmentation and degree of interplate coupling at the Lesser Antilles subduction is key to our understanding of the earthquake potential of a subduction whose length is similar to the rupture area of the Mw9.0, 2011, Tohoku earthquake in Japan. We used the block modeling approach described in Meade and Loveless (2009) to test the optimal block geometry for the northern, eastern and southern boundaries of the Caribbean plate. We solved for angular velocities for each block/plate and strain accumulation rates for all major faults in the region. Then we calculated the variations in interplate coupling along the subduction plate boundaries using the accumulated strain rates. We tested 11 different block geometries; they are all based on geological evidences unless they are suggested by discrepancies within the GPS and seismological data or by previously published results. We confirm the existence of the micro Gonave plate. The boundary between the Micro-Gonave plate and the Hispaniola crustal block is better suited along the Haitian-Thrust-Belt instead of the Neiba-Matheux fault. The interseismic GPS velocities do not show evidence for a distinct North Lesser Antilles block. We found a totally uncoupled section of the subduction starting from the Puerto-Rico trench to the end of the Lesser Antilles section. All the relative motion of the Caribbean block is lost aseismically along the boundary of that portion of the subduction. While we found strong coupling along the northern Hispaniola section, most of the deformation on this region is being accumulated along intrablock faults with very low strain (~2mm/yr) along the intraplate subduction interface. We also

  4. Vertical-axis rotations and deformation along the active strike-slip El Tigre Fault (Precordillera of San Juan, Argentina) assessed through palaeomagnetism and anisotropy of magnetic susceptibility

    NASA Astrophysics Data System (ADS)

    Fazzito, Sabrina Y.; Rapalini, Augusto E.; Cortés, José M.; Terrizzano, Carla M.

    2016-05-01

    Palaeomagnetic data from poorly consolidated to non-consolidated late Cenozoic sediments along the central segment of the active El Tigre Fault (Central-Western Precordillera of the San Juan Province, Argentina) demonstrate broad cumulative deformation up to ~450 m from the fault trace and reveal clockwise and anticlockwise vertical-axis rotations of variable magnitude. This deformation has affected in different amounts Miocene to late Pleistocene samples and indicates a complex kinematic pattern. Several inherited linear structures in the shear zone that are oblique to the El Tigre Fault may have acted as block boundary faults. Displacement along these faults may have resulted in a complex pattern of rotations. The maximum magnitude of rotation is a function of the age of the sediments sampled, with largest values corresponding to middle Miocene-lower Pliocene deposits and minimum values obtained from late Pleistocene deposits. The kinematic study is complemented by low-field anisotropy of magnetic susceptibility data to show that the local strain regime suggests a N-S stretching direction, subparallel to the strike of the main fault.

  5. Development of a Bayesian approach to assess the probability of concealed active faults using Helium isotope ratios: An example from the western Tottori area, SW Japan

    NASA Astrophysics Data System (ADS)

    Martin, A. J.; Umeda, K.; Ishimaru, T.

    2012-12-01

    In Japan, numerous research projects have been carried out to assess the long-term stability of the geological environment including in particular, the spatio-temporal distribution of volcanism and active faulting in the context siting of a geological repository for the long-term (0.1 - 1 Ma) disposal of high-level radioactive waste. Of particular concern is the existence of active faulting that shows no expression at the surface and thus not necessarily recorded in currently published active fault maps. Recent research carried out in the western Tottori area, southwest Japan, has implied the potential of using He-3/He-4 ratios as a means of providing indirect evidence of the existence of source fault(s) that caused the 6 Oct 2000 Tottori earthquake but which had no apparent surface indication [e.g. Umeda et al. 2011]. This is based on the theory that mantle helium can reach the shallow crustal depths due to faults in the crust acting as pathways [e.g. Kennedy et al. 1997]. Here we introduce a new technique based on Bayesian inference in an effort to quantify this phenomenon and present our preliminary findings. In the Bayesian paradigm, we make a priori assumptions based on the tectonic setting of the study area as a starting point. One a priori assumption could be that 'unknown' faults do not exist far from 'known' faults. Depending on the degree of conservation required in the first step, 2-D a priori probability distributions are calculated using kernel functions with varying values of standard deviation. The recently acquired helium isotope ratios are then combined to the a priori probability distributions using Bayes' rule to produce modified a posteriori probabilities that is expected to better capture the hidden faults. The potential of the methodology to incorporate other information such as GPS data will also be presented and discussed. References Kennedy, B. M., Y. K. Kharaka, W. C. Evans, A. Ellwood, D. J. DePaolo, J. Thordsen, G. Ambats, and R. H

  6. dMODELS: A MATLAB software package for modeling crustal deformation near active faults and volcanic centers

    NASA Astrophysics Data System (ADS)

    Battaglia, Maurizio; Cervelli, Peter F.; Murray, Jessica R.

    2013-03-01

    We have developed a MATLAB software package for the most common models used to interpret deformation measurements near faults and active volcanic centers. The emphasis is on analytical models of deformation that can be compared with data from the Global Positioning System (GPS), InSAR, tiltmeters and strainmeters. Source models include pressurized spherical, ellipsoidal and sill-like magma chambers in an elastic, homogeneous, flat half-space. Dikes and faults are described following the mathematical notation for rectangular dislocations in an elastic, homogeneous, flat half-space. All the expressions have been checked for typographical errors that might have been present in the original literature, extended to include deformation and strain within the Earth's crust (as opposed to only the Earth's surface) and verified against finite element models. A set of GPS measurements from the 2006 eruption at Augustine Volcano (Alaska) is used to test the software package. The results show that the best fit source to the GPS data is a spherical intrusion (ΔV=5×10 km3), about 880 m beneath the volcano's summit.

  7. U-series dating of co-seismic gypsum and submarine paleoseismology of active faults in Northern Chile (23°S)

    NASA Astrophysics Data System (ADS)

    Vargas, Gabriel; Palacios, Carlos; Reich, Martin; Luo, Shangde; Shen, Chuan-Chou; González, Gabriel; Wu, Yi-Chen

    2011-01-01

    The convergence of the Nazca and South American plates along the subduction margin of the central Andes results in large subduction earthquakes and tectonic activity along major fault systems. Despite its relevance, the paleoseismic record of this region is scarce, hampering our understanding about the relationship between the Andes building and earthquake occurrence. In this study, we used the U-series disequilibrium method to obtain absolute ages of paleoearthquake events associated with normal displacements along the active Mejillones and Salar del Carmen faults in the Coastal Range of the Atacama Desert of northern Chile. The 230Th- 234U disequilibrium ages in co-seismic gypsum salts sampled along the fault traces together with marine evidences indicate that earthquakes occurred at ca. 29.7 ± 1.7 ka, 11 ± 4 ka and 2.4 ± 0.8 ka. When coupled with paleoseismic marine and radiocarbon ( 14C) records in the nearby Mejillones Bay evidencing large dislocations along the Mejillones Fault, the geochronological dataset presented here is consistent with the notion that gypsum salts formed during large earthquakes as a result of co-seismic dilatancy pumping of saline waters along the major faults. Based on maximum observed cumulative vertical offsets in the studied faults, this phenomena could have occurred episodically at a rate in the order of 1:40 to 1:50 with respect to the very large subduction earthquakes during the latest Pleistocene-Holocene period. The results presented here reveal that the U-series disequilibrium method can be successfully applied to date the gypsum salts deposited along faults during seismic events, and therefore directly constrain the age of large paleoearthquakes in hyperarid and seismically active zones.

  8. Active upper plate thrust faulting in regions of low plate interface coupling, repeated slow slip events, and coastal uplift: Example from the Hikurangi Margin, New Zealand

    NASA Astrophysics Data System (ADS)

    Mountjoy, Joshu J.; Barnes, Philip M.

    2011-01-01

    Contractional fore-arc faulting and deformation is a characteristic feature of many subduction systems. Definition of the three-dimensional geometry and displacement rates of active, upper plate, out-of-sequence thrust faults along ˜250 km of the upper Hikurangi Margin enables us to examine the relationship between fore-arc deformation and the subduction interface in light of interseismic coupling estimates and distribution of slow slip events, both modeled from GPS measurements. These mid-fore-arc structures include the seaward vergent, outer shelf Lachlan and Ariel faults, with vertical separation rates up to 5 mm/yr, and several other major inner shelf faults with rates that are up to 3.8 mm/yr and comparable with Holocene coastal uplift rates. Seismic reflection imaging and geometric projection of these faults at depth indicate that they splay from the region of the plate interface where geodetic inversions for interseismic coupling and slow slip events suggest that the plate boundary undergoes aseismic slip. This observation may indicate either (1) that frictional properties and interseismic coupling on the plate interface are independent and unrelated to the active splay fault deformation in the inner-middle fore arc or (2) that the active splay faulting reflects long-term mechanical coupling related to higher shear stress, or the relative yield strength of the plate interface to the overriding plate, and that the current pattern of interseismic coupling may not be persistent over geological time scales of 20 ka. We compare structure and processes on the northern Hikurangi and Costa Rican margins and find similarities and significant differences astride these subduction systems.

  9. Glacier Ice Mass Fluctuations and Fault Instability in Tectonically Active Southern Alaska

    NASA Technical Reports Server (NTRS)

    SauberRosenberg, Jeanne M.; Molnia, Bruce F.

    2003-01-01

    Across southern Alaska the northwest directed subduction of the Pacific plate is accompanied by accretion of the Yakutat terrane to continental Alaska. This has led to high tectonic strain rates and dramatic topographic relief of more than 5000 meters within 15 km of the Gulf of Alaska coast. The glaciers of this area are extensive and include large glaciers undergoing wastage (glacier retreat and thinning) and surges. The large glacier ice mass changes perturb the tectonic rate of deformation at a variety of temporal and spatial scales. We estimated surface displacements and stresses associated with ice mass fluctuations and tectonic loading by examining GPS geodetic observations and numerical model predictions. Although the glacial fluctuations perturb the tectonic stress field, especially at shallow depths, the largest contribution to ongoing crustal deformation is horizontal tectonic strain due to plate convergence. Tectonic forces are thus the primary force responsible for major earthquakes. However, for geodetic sites located < 10-20 km from major ice mass fluctuations, the changes of the solid Earth due to ice loading and unloading are an important aspect of interpreting geodetic results. The ice changes associated with Bering Glacier s most recent surge cycle are large enough to cause discernible surface displacements. Additionally, ice mass fluctuations associated with the surge cycle can modify the short-term seismicity rates in a local region. For the thrust faulting environment of the study region a large decrease in ice load may cause an increase in seismic rate in a region close to failure whereas ice loading may inhibit thrust faulting.

  10. Active crustal deformation of the El Salvador Fault Zone (ESFZ) using GPS data: Implications in seismic hazard assessment

    NASA Astrophysics Data System (ADS)

    Staller, Alejandra; Benito, Belen; Jesús Martínez-Díaz, José; Hernández, Douglas; Hernández-Rey, Román; Alonso-Henar, Jorge

    2014-05-01

    El Salvador, Central America, is part of the Chortis block in the northwestern boundary of the Caribbean plate. This block is interacting with a diffuse triple junction point with the Cocos and North American plates. Among the structures that cut the Miocene to Pleistocene volcanic deposits stands out the El Salvador Fault Zone (ESFZ): It is oriented in N90º-100ºE direction, and it is composed of several structural segments that deform Quaternary deposits with right-lateral and oblique slip motions. The ESFZ is seismically active and capable of producing earthquakes such as the February 13, 2001 with Mw 6.6 (Martínez-Díaz et al., 2004), that seriously affected the population, leaving many casualties. This structure plays an important role in the tectonics of the Chortis block, since its motion is directly related to the drift of the Caribbean plate to the east and not with the partitioning of the deformation of the Cocos subduction (here not coupled) (Álvarez-Gómez et al., 2008). Together with the volcanic arc of El Salvador, this zone constitutes a weakness area that allows the motion of forearc block toward the NW. The geometry and the degree of activity of the ESFZ are not studied enough. However their knowledge is essential to understand the seismic hazard associated to this important seismogenic structure. For this reason, since 2007 a GPS dense network was established along the ESFZ (ZFESNet) in order to obtain GPS velocity measurements which are later used to explain the nature of strain accumulation on major faults along the ESFZ. The current work aims at understanding active crustal deformation of the ESFZ through kinematic model. The results provide significant information to be included in a new estimation of seismic hazard taking into account the major structures in ESFZ.

  11. Earthquakes and fault creep on the northern San Andreas fault

    USGS Publications Warehouse

    Nason, R.

    1979-01-01

    At present there is an absence of both fault creep and small earthquakes on the northern San Andreas fault, which had a magnitude 8 earthquake with 5 m of slip in 1906. The fault has apparently been dormant after the 1906 earthquake. One possibility is that the fault is 'locked' in some way and only produces great earthquakes. An alternative possibility, presented here, is that the lack of current activity on the northern San Andreas fault is because of a lack of sufficient elastic strain after the 1906 earthquake. This is indicated by geodetic measurements at Fort Ross in 1874, 1906 (post-earthquake), and 1969, which show that the strain accumulation in 1969 (69 ?? 10-6 engineering strain) was only about one-third of the strain release (rebound) in the 1906 earthquake (200 ?? 10-6 engineering strain). The large difference in seismicity before and after 1906, with many strong local earthquakes from 1836 to 1906, but only a few strong earthquakes from 1906 to 1976, also indicates a difference of elastic strain. The geologic characteristics (serpentine, fault straightness) of most of the northern San Andreas fault are very similar to the characteristics of the fault south of Hollister, where fault creep is occurring. Thus, the current absence of fault creep on the northern fault segment is probably due to a lack of sufficient elastic strain at the present time. ?? 1979.

  12. Imaging active faulting in a region of distributed deformation from the joint clustering of focal mechanisms and hypocentres: Application to the Azores-western Mediterranean region

    NASA Astrophysics Data System (ADS)

    Custódio, Susana; Lima, Vânia; Vales, Dina; Cesca, Simone; Carrilho, Fernando

    2016-04-01

    The matching between linear trends of hypocentres and fault planes indicated by focal mechanisms (FMs) is frequently used to infer the location and geometry of active faults. This practice works well in regions of fast lithospheric deformation, where earthquake patterns are clear and major structures accommodate the bulk of deformation, but typically fails in regions of slow and distributed deformation. We present a new joint FM and hypocentre cluster algorithm that is able to detect systematically the consistency between hypocentre lineations and FMs, even in regions of distributed deformation. We apply the method to the Azores-western Mediterranean region, with particular emphasis on western Iberia. The analysis relies on a compilation of hypocentres and FMs taken from regional and global earthquake catalogues, academic theses and technical reports, complemented by new FMs for western Iberia. The joint clustering algorithm images both well-known and new seismo-tectonic features. The Azores triple junction is characterised by FMs with vertical pressure (P) axes, in good agreement with the divergent setting, and the Iberian domain is characterised by NW-SE oriented P axes, indicating a response of the lithosphere to the ongoing oblique convergence between Nubia and Eurasia. Several earthquakes remain unclustered in the western Mediterranean domain, which may indicate a response to local stresses. The major regions of consistent faulting that we identify are the mid-Atlantic ridge, the Terceira rift, the Trans-Alboran shear zone and the north coast of Algeria. In addition, other smaller earthquake clusters present a good match between epicentre lineations and FM fault planes. These clusters may signal single active faults or wide zones of distributed but consistent faulting. Mainland Portugal is dominated by strike-slip earthquakes with fault planes coincident with the predominant NNE-SSW and WNW-ESE oriented earthquake lineations. Clusters offshore SW Iberia are

  13. Tool for Viewing Faults Under Terrain

    NASA Technical Reports Server (NTRS)

    Siegel, Herbert, L.; Li, P. Peggy

    2005-01-01

    Multi Surface Light Table (MSLT) is an interactive software tool that was developed in support of the QuakeSim project, which has created an earthquake- fault database and a set of earthquake- simulation software tools. MSLT visualizes the three-dimensional geometries of faults embedded below the terrain and animates time-varying simulations of stress and slip. The fault segments, represented as rectangular surfaces at dip angles, are organized into collections, that is, faults. An interface built into MSLT queries and retrieves fault definitions from the QuakeSim fault database. MSLT also reads time-varying output from one of the QuakeSim simulation tools, called "Virtual California." Stress intensity is represented by variations in color. Slips are represented by directional indicators on the fault segments. The magnitudes of the slips are represented by the duration of the directional indicators in time. The interactive controls in MSLT provide a virtual track-ball, pan and zoom, translucency adjustment, simulation playback, and simulation movie capture. In addition, geographical information on the fault segments and faults is displayed on text windows. Because of the extensive viewing controls, faults can be seen in relation to one another, and to the terrain. These relations can be realized in simulations. Correlated slips in parallel faults are visible in the playback of Virtual California simulations.

  14. A Signal of Ice Loading in Late Pleistocene Activity of the Sudetic Marginal Fault (Central Europe)

    NASA Astrophysics Data System (ADS)

    Hartvich, F.; Stepancikova, P.; Rockwell, T. K.; Nývlt, D.; Stemberk, J.; Rood, D. H.; Hók, J.; Ortuňo, M.; Myers, M.; Luttrell, K. M.; Wechsler, N.

    2014-12-01

    We combine paleoseismic trench and cosmogenic dating results to study the late Pleistocene-Holocene history of morphologically pronounced NW-SE trending Sudetic Marginal Fault (SMF) situated at the northeastern limit of the Bohemian Massif in central Europe. Eighteen trenches were excavated at the Bila Voda site to study 3D distribution of a beheaded alluvial fan on the NE block of the fault and to find the offset "feeder channel" that sourced the deposits. We interpret a small drainage of about 40-60 m to the SE of the fan apex as the feeder channel. A 2.5 m depth profile was collected for cosmogenic exposure dating from a well-preserved part of the fan. Using a simple model that accounts for pre-depositional exposure (inheritance) and assuming no surface erosion, 10Be concentrations are well-fit with an apparent exposure age of ~12 ka. However, this is a minimum limiting age if the surface was eroded by gelifluction in the late Pleistocene. Assuming a ~25 ka OSL age for the base of the fan apex it gives a left-lateral slip rate of ~2 mm/yr. As the Holocene deposits do not show significant displacement, most of the recorded slip took place during Late Pleistocene with corresponding slip rate of 2.8 to 3.5 mm/yr. Bila Voda site lies ~150 km south from the Late Pleistocene Weichselian maximum (~20 ka) ice-sheet front. Thus, we hypothesize that the slip rate acceleration was due to ice-loading and subsequent unloading during deglaciation. To test this, we calculated the stress induced in the lithosphere from ablation of the Weichselian ice sheet modeled as a flexing elastic plate. Preliminary modeling results indicate that complete deglaciation alters the stress field such that it would inhibit left lateral failure on the SMF, consistent with observations suggesting no slip occurred during the Holocene. Although the SMF is ~150 km from the Weichselian ice sheet front, it is well within the flexural rebound area of the ice sheet, causing normal stress on the SMF to

  15. Evaluating, Migrating, and Consolidating Databases and Applications for Long-Term Surveillance and Maintenance Activities at the Rocky Flats Site

    SciTech Connect

    Surovchak, S.; Marutzky, S.; Thompson, B.; Miller, K.; Labonte, E.

    2006-07-01

    The U.S. Department of Energy (DOE) Office of Legacy Management (LM) is assuming responsibilities for long-term surveillance and maintenance (LTS and M) activities at the Rocky Flats Environmental Technology Site (RFETS) during fiscal year 2006. During the transition, LM is consolidating databases and applications that support these various functions into a few applications which will streamline future management and retrieval of data. This paper discussed the process of evaluating, migrating, and consolidating these databases and applications for LTS and M activities and provides lessons learned that will benefit future transitions. (authors)

  16. Faults Activities And Crustal Deformation Along The Arc-Continent Collision Boundary, Eastern Taiwan - Observed From Persistent Scatterer SAR Interferometry

    NASA Astrophysics Data System (ADS)

    Yen, Jiun-Yee; Chang, Chung-Pai; Hooper, Andrew; Chang, Yo-Ho; Liang, Wen-Tzong; Chang, Tsui-Yu

    2010-05-01

    Located in the southeastern periphery of the Eurasian plate, eastern Taiwan marks the collional boundary between the Eurasian plate and the Philippine Sea plate. These two plates converge at about 8 cm/yr near Taiwan and nearly half of the shortening is consumed in eastern Taiwan. There have been many studies in this area about the dynamics of the plate convergence, however, most of the geodetic studies focused on small area (strainmeter), with very few data points (GPS), or only gather data along a specific profile (leveling). We applied the Persistent Scatterer SAR Interferometry in the Longitudinal Valley of eastern Taiwan to observe temporally-variable processes using both ERS and Envisat data. At the same time, leveling and GPS data were measured for the auxiliary tool to verify the deformation rate in this area. Our result indicated that although the area is under active collision, faults do not move in the same fashion along the boundary. In the very northern part of the collided arc, small subsidence has been detected, while in the north-central part very few activity is observed. In the central and southern part of the collisional boundary, patches of faults are moving as rapidly as 15 mm/yr along radar line-of-sight. In addition. between late 2004 and middle 2005 there had been an earthquake swarm consists of shallow earthquakes, which coincided with PSI observation of a large vertical displacement. The comparison between our leveling data and PS results indicated PSI is a reliable tool even in the highly vegetated area in eastern Taiwan.

  17. Active faulting south of the Himalayan Front: Establishing a new plate boundary

    NASA Astrophysics Data System (ADS)

    Yeats, Robert S.; Thakur, V. C.

    2008-06-01

    New tectonic uplifts south of the Salt Range Thrust and Himalayan Front Thrust (HFT) represent an outward step of the plate boundary from the principal tectonic displacement zone into the Indo-Gangetic Plain. In Pakistan, the Lilla Anticline deforms fine-grained overbank deposits of the Jhelum River floodplain 15 km south of the Salt Range. The anticline is overpressured in Eocambrian non-marine strata. In northwest India south of Dehra Dun, the Piedmont Fault (PF) lies 15 km south of the HFT. Coalescing fans derived from the Himalaya form a piedmont (Old Piedmont Zone) 15-20 km wide east of the Yamuna River. This zone is uplifted as much as 15-20 m near the PF, and bedding is tilted 5-7° northeast. Holocene thermoluminescence-optically-stimulated luminescence dates for sediments in the Old Piedmont Zone suggest that the uplift rate might be as high as several mm/a. The Old Piedmont Zone is traced northwest 200 km and southeast another 200 km to the Nepal border. These structures, analogous to protothrusts in subduction zones, indicate that the Himalayan plate boundary is not a single structure but a series of structures across strike, including reactivated parts of the Main Boundary Thrust north of the range front, the HFT sensu stricto, and stepout structures on the Indo-Gangetic Plain. Displacement rates on all these structures must be added to determine the local India-Himalaya convergence rate.

  18. Active faulting Vs other surface displacing complex geomorphic phenomena. Case studies from a tectonically active area, Abruzzi Region, central Apennines, Italy

    NASA Astrophysics Data System (ADS)

    Lo Sardo, Lorenzo; Gori, Stefano; Falcucci, Emanuela; Saroli, Michele; Moro, Marco; Galadini, Fabrizio; Lancia, Michele; Fubelli, Giandomenico; Pezzo, Giuseppe

    2016-04-01

    How can be univocally inferred the genesis of a linear surface scarp as the result of an active and capable fault (FAC) in tectonically active regions? Or, conversely, how it is possible to exclude that a scarp is the result of a capable fault activation? Trying to unravel this open questions, we show two ambiguous case studies about the problem of the identification of active and capable faults in a tectonically active area just based on the presence of supposed fault scarps at surface. The selected cases are located in the area comprised between the Middle Aterno Valley Fault (MAVF) and the Campo Imperatore Plain (Abruzzi Region, central Apennines), nearby the epicentral area of the April 6th, 2009 L'Aquila earthquake. In particular, the two case studies analysed are located in a region characterized by a widespread Quaternary faults and by several linear scarps: the case studies of (i) Prata D'Ansidonia area and (ii) Santo Stefano di Sessanio area. To assess the origin and the state of activity of the investigated geomorphic features, we applied a classical geological and geomorphological approach, based on the analysis of the available literature, the interpretation of the aerial photographs, field surveying and classical paleoseismological approach, the latter consisting in digging excavations across the analysed scarps. These analysis were then integrated by morphometrical analyses. As for case (i), we focused on determining the geomorphic "meaning" of linear scarps carved onto fluvial-deltaic conglomerates (dated to the Early Pleistocene; Bertini and Bosi, 1993), up to 3 meters high and up to 1,5 km long, that border a narrow, elongated and flat-bottom depressions, filled by colluvial deposits. These features groove the paleo-landsurface of Valle Daria (Bosi and Bertini, 1970), wide landsurface located between Barisciano and Prata D'Ansidonia. Entwining paleoseismological trenching with geophysical analyses (GPR, ERT and microgravimetrical prospections), it

  19. Pen Branch Fault Program

    SciTech Connect

    Price, V.; Stieve, A.L.; Aadland, R.

    1990-09-28

    Evidence from subsurface mapping and seismic reflection surveys at Savannah River Site (SRS) suggests the presence of a fault which displaces Cretaceous through Tertiary (90--35 million years ago) sediments. This feature has been described and named the Pen Branch fault (PBF) in a recent Savannah River Laboratory (SRL) paper (DP-MS-88-219). Because the fault is located near operating nuclear facilities, public perception and federal regulations require a thorough investigation of the fault to determine whether any seismic hazard exists. A phased program with various elements has been established to investigate the PBF to address the Nuclear Regulatory Commission regulatory guidelines represented in 10 CFR 100 Appendix A. The objective of the PBF program is to fully characterize the nature of the PBF (ESS-SRL-89-395). This report briefly presents current understanding of the Pen Branch fault based on shallow drilling activities completed the fall of 1989 (PBF well series) and subsequent core analyses (SRL-ESS-90-145). The results are preliminary and ongoing: however, investigations indicate that the fault is not capable. In conjunction with the shallow drilling, other activities are planned or in progress. 7 refs., 8 figs., 1 tab.

  20. Fault diagnosis

    NASA Technical Reports Server (NTRS)

    Abbott, Kathy

    1990-01-01

    The objective of the research in this area of fault management is to develop and implement a decision aiding concept for diagnosing faults, especially faults which are difficult for pilots to identify, and to develop methods for presenting the diagnosis information to the flight crew in a timely and comprehensible manner. The requirements for the diagnosis concept were identified by interviewing pilots, analyzing actual incident and accident cases, and examining psychology literature on how humans perform diagnosis. The diagnosis decision aiding concept developed based on those requirements takes abnormal sensor readings as input, as identified by a fault monitor. Based on these abnormal sensor readings, the diagnosis concept identifies the cause or source of the fault and all components affected by the fault. This concept was implemented for diagnosis of aircraft propulsion and hydraulic subsystems in a computer program called Draphys (Diagnostic Reasoning About Physical Systems). Draphys is unique in two important ways. First, it uses models of both functional and physical relationships in the subsystems. Using both models enables the diagnostic reasoning to identify the fault propagation as the faulted system continues to operate, and to diagnose physical damage. Draphys also reasons about behavior of the faulted system over time, to eliminate possibilities as more information becomes available, and to update the system status as more components are affected by the fault. The crew interface research is examining display issues associated with presenting diagnosis information to the flight crew. One study examined issues for presenting system status information. One lesson learned from that study was that pilots found fault situations to be more complex if they involved multiple subsystems. Another was pilots could identify the faulted systems more quickly if the system status was presented in pictorial or text format. Another study is currently under way to

  1. 3D modelling of the active normal fault network in the Apulian Ridge (Eastern Mediterranean Sea): Integration of seismic and bathymetric data with implicit surface methods

    NASA Astrophysics Data System (ADS)

    Bistacchi, Andrea; Pellegrini, Caludio; Savini, Alessandra; Marchese, Fabio

    2016-04-01

    The Apulian ridge (North-eastern Ionian Sea, Mediterranean), interposed between the facing Apennines and Hellenides subduction zones (to the west and east respectively), is characterized by thick cretaceous carbonatic sequences and discontinuous tertiary deposits crosscut by a penetrative network of NNW-SSE normal faults. These are exposed onshore in Puglia, and are well represented offshore in a dataset composed of 2D seismics and wells collected by oil companies from the '60s to the '80s, more recent seismics collected during research projects in the '90s, recent very high resolution seismics (VHRS - Sparker and Chirp-sonar data), multibeam echosounder bathymetry, and sedimentological and geo-chronological analyses of sediment samples collected on the seabed. Faults are evident in 2D seismics at all scales, and their along-strike geometry and continuity can be characterized with multibeam bathymetric data, which show continuous fault scarps on the seabed (only partly reworked by currents and covered by landslides). Fault scarps also reveal the finite displacement accumulated in the Holocene-Pleistocene. We reconstructed a 3D model of the fault network and suitable geological boundaries (mainly unconformities due to the discontinuous distribution of quaternary and tertiary sediments) with implicit surface methods implemented in SKUA/GOCAD. This approach can be considered very effective and allowed reconstructing in details complex structures, like the frequent relay zones that are particularly well imaged by seafloor geomorphology. Mutual cross-cutting relationships have been recognized between fault scarps and submarine mass-wasting deposits (Holocene-Pleistocene), indicating that, at least in places, these features are coeval, hence the fault network should be considered active. At the regional scale, the 3D model allowed measuring the horizontal WSW-ENE stretching, which can be associated to the bending moment applied to the Apulian Plate by the combined effect

  2. Third millenium ideal gas and condensed phase thermochemical database for combustion (with update from active thermochemical tables).

    SciTech Connect

    Burcat, A.; Ruscic, B.; Chemistry; Technion - Israel Inst. of Tech.

    2005-07-29

    The thermochemical database of species involved in combustion processes is and has been available for free use for over 25 years. It was first published in print in 1984, approximately 8 years after it was first assembled, and contained 215 species at the time. This is the 7th printed edition and most likely will be the last one in print in the present format, which involves substantial manual labor. The database currently contains more than 1300 species, specifically organic molecules and radicals, but also inorganic species connected to combustion and air pollution. Since 1991 this database is freely available on the internet, at the Technion-IIT ftp server, and it is continuously expanded and corrected. The database is mirrored daily at an official mirror site, and at random at about a dozen unofficial mirror and 'finger' sites. The present edition contains numerous corrections and many recalculations of data of provisory type by the G3//B3LYP method, a high-accuracy composite ab initio calculation. About 300 species are newly calculated and are not yet published elsewhere. In anticipation of the full coupling, which is under development, the database started incorporating the available (as yet unpublished) values from Active Thermochemical Tables. The electronic version now also contains an XML file of the main database to allow transfer to other formats and ease finding specific information of interest. The database is used by scientists, educators, engineers and students at all levels, dealing primarily with combustion and air pollution, jet engines, rocket propulsion, fireworks, but also by researchers involved in upper atmosphere kinetics, astrophysics, abrasion metallurgy, etc. This introductory article contains explanations of the database and the means to use it, its sources, ways of calculation, and assessments of the accuracy of data.

  3. Database of potential sources for earthquakes larger than magnitude 6 in Northern California

    USGS Publications Warehouse

    ,

    1996-01-01

    The Northern California Earthquake Potential (NCEP) working group, composed of many contributors and reviewers in industry, academia and government, has pooled its collective expertise and knowledge of regional tectonics to identify potential sources of large earthquakes in northern California. We have created a map and database of active faults, both surficial and buried, that forms the basis for the northern California portion of the national map of probabilistic seismic hazard. The database contains 62 potential sources, including fault segments and areally distributed zones. The working group has integrated constraints from broadly based plate tectonic and VLBI models with local geologic slip rates, geodetic strain rate, and microseismicity. Our earthquake source database derives from a scientific consensus that accounts for conflict in the diverse data. Our preliminary product, as described in this report brings to light many gaps in the data, including a need for better information on the proportion of deformation in fault systems that is aseismic.

  4. Macroseismological And Paleoseismological Studies In The Active Segments Of The Morelia Acambay Fault System, Mexico

    NASA Astrophysics Data System (ADS)

    Garduño-Monroy, V. H.; Rodriguez-Pascua, M. A.; Israde-Alcantara, I.; Hernandez-Madrigal, V. M.

    2007-05-01

    Paleoseismological studies along several faults of the Morelia-Acambay system show clear evidence of its seismicity. In the Acambay region, four seismic events were identified during the Pliocene Pleistocene; two linked to large sub aquatic landslides, and two to liquefaction processes. The two seismic events associated to slumps were also recognized in the Ixtlahuaca, Mexico, region; meaning these were relevant seismic events at a regional level. Their magnitudes were above 5 degrees. Because these latter events are located in the same column, they could be of aid in knowing recurrence periods. In the southern portion of the Lake of Patzcuaro region a collapse was identified generating a rock avalanche nearly 29,000 years ago. This collapse is associated to an earthquake of magnitude above 7 degrees, which decreased the lake's extension and resulted in morphology of small hummocks. The Purhepecha term Jaracuaro means "place that emerges" and is the name of a former island where Pre Hispanic settlements occurred. The island is exclusively made up of lacustrine sequences that rose above 50m in height, georadar and vertical electrical signal (VES) studies do not reveal intrusive bodies associated to this deformation. Isosists of the 1845 and 1858 seismic events were reconstructed in the modified Mercalli scale through several historical studies in a number of municipalities in the State of Michoacan. The results indicate isosistes of IX degrees in Patzcuaro, where the earthquake caused the collapse of the basilica. During the 1858 earthquake the water level in the southern portion of the Lake of Patzcuaro raised over 2m and the destruction of 120 adobe houses is related to the generation of a tsunami. This seismic event is being characterized in wells and ditches dugs around Patzcuaro Lake. The region of Patzcuaro has experienced a number of magmatic and tectonic events that undoubtedly modified the conditions of the lake regarding its sedimentology and anthropogenic

  5. Back analysis of fault-slip in burst prone environment

    NASA Astrophysics Data System (ADS)

    Sainoki, Atsushi; Mitri, Hani S.

    2016-11-01

    In deep underground mines, stress re-distribution induced by mining activities could cause fault-slip. Seismic waves arising from fault-slip occasionally induce rock ejection when hitting the boundary of mine openings, and as a result, severe damage could be inflicted. In general, it is difficult to estimate fault-slip-induced ground motion in the vicinity of mine openings because of the complexity of the dynamic response of faults and the presence of geological structures. In this paper, a case stud