Science.gov

Sample records for active interlock system

  1. Laser interlock system

    SciTech Connect

    Woodruff, Steven D; Mcintyre, Dustin L

    2015-01-13

    A method and device for providing a laser interlock having a first optical source, a first beam splitter, a second optical source, a detector, an interlock control system, and a means for producing dangerous optical energy. The first beam splitter is optically connected to the first optical source, the first detector and the second optical source. The detector is connected to the interlock control system. The interlock control system is connected to the means for producing dangerous optical energy and configured to terminate its optical energy production upon the detection of optical energy at the detector from the second optical source below a predetermined detector threshold. The second optical source produces an optical energy in response to optical energy from the first optical source. The optical energy from the second optical source has a different wavelength, polarization, modulation or combination thereof from the optical energy of the first optical source.

  2. B190 computer controlled radiation monitoring and safety interlock system

    SciTech Connect

    Espinosa, D L; Fields, W F; Gittins, D E; Roberts, M L

    1998-08-01

    The Center for Accelerator Mass Spectrometry (CAMS) in the Earth and Environmental Sciences Directorate at Lawrence Livermore National Laboratory (LLNL) operates two accelerators and is in the process of installing two new additional accelerators in support of a variety of basic and applied measurement programs. To monitor the radiation environment in the facility in which these accelerators are located and to terminate accelerator operations if predetermined radiation levels are exceeded, an updated computer controlled radiation monitoring system has been installed. This new system also monitors various machine safety interlocks and again terminates accelerator operations if machine interlocks are broken. This new system replaces an older system that was originally installed in 1988. This paper describes the updated B190 computer controlled radiation monitoring and safety interlock system.

  3. Description of a system for interlocking elevated temperature mechanical tests

    SciTech Connect

    Schmale, D.T.; Poulter, G.A.

    1995-07-01

    Long term mechanical creep and fatigue testing at elevated temperatures requires reliable systems with safeguards to prevent destruction of equipment, loss of data and negative environmental impacts. Toward this goal, a computer controlled system has been developed and built for interlocking tests run on elevated temperature mechanical test facilities. Sensors for water flow, water pressure, water leakage, temperature, power and hydraulic status are monitored to control specimen heating equipment through solid state relays and water solenoid valves. The system is designed to work with the default interlocks present in the RF generators and mechanical tests systems. Digital hardware consists of two National Instruments 1/0 boards mounted in a Macintosh IIci computer. Software is written in National Instruments LabVIEW. Systems interlocked include two MTS closed loop servo controlled hydraulic test frames, one with an RF generator and one with both an RF generator and a quartz lamp furnace. Control for individual test systems is modularized making the addition of more systems simple. If any of the supporting utilities fail during tests, heating systems, chill water and hydraulics are powered down, minimizing specimen damage and eliminating equipment damage. The interlock control is powered by an uninterruptible power supply. Upon failure the cause is documented in an ASCII file.

  4. Description of a system for interlocking elevated temperature mechanical tests

    NASA Astrophysics Data System (ADS)

    Schmale, D. T.; Poulter, G. A.

    1995-07-01

    Long term mechanical creep and fatigue testing at elevated temperatures requires reliable systems with safeguards to prevent destruction of equipment, loss of data, and negative environmental impacts. Toward this goal, a computer controlled system has been developed and built for interlocking tests run on elevated temperature mechanical test facilities. Sensors for water flow, water pressure, water leakage, temperature, power, and hydraulic status are monitored to control specimen heating equipment through solid state relays and water solenoid valves. The system is designed to work with the default interlocks present in the RF generators and mechanical tests systems. Digital hardware consists of two National Instruments I/O boards mounted in a Macintosh IIci computer. Software is written in National Instruments LabVIEW. Systems interlocked include two MTS closed loop servo controlled hydraulic test frames, one with an RF generator and one with both an RF generator and a quartz lamp furnace. Control for individual test systems is modularized making the addition of more systems simple. If any of the supporting utilities fail during tests, heating systems, chill water, and hydraulics are powered down, minimizing specimen damage and eliminating equipment damage. The interlock control is powered by an uninterruptible power supply. Upon failure the cause is documented in an ASCII file.

  5. HEPA Filter Differential Pressure Fan Interlock System Functional Requirements and Technical Design Criteria

    SciTech Connect

    TUCK, J.A.

    2000-05-11

    Double-shell tanks (DSTs) and Double Contained Receiver Tanks (DCRTs) are actively ventilated, along with certain single-shell tanks (SSTs) and other RPP facilities. The exhaust air stream on a typical primary ventilation system is drawn through two stages of high-efficiency particulate air (HEPA) filtration to ensure confinement of airborne radioactive materials. Active ventilation exhaust stacks require a stack CAM interlock to detect releases from postulated accidents, and to shut down the exhaust fan when high radiation levels are detected in the stack airstream. The stack CAM interlock is credited as a mitigating control to stop continued unfiltered radiological and toxicological discharges from the stack, which may result from an accident involving failure of a HEPA filter. This document defines the initial technical design baseline for a HEPA filter AP fan interlock system.

  6. Modular safety interlock system for high energy physics experiments

    SciTech Connect

    Kieffer, J.; Golceff, B.V.

    1980-10-01

    A frequent problem in electronics systems for high energy physics experiments is to provide protection for personnel and equipment. Interlock systems are typically designed as an afterthought and as a result, the working environment around complex experiments with many independent high voltages or hazardous gas subsystems, and many different kinds of people involved, can be particularly dangerous. A set of modular hardware has been designed which makes possible a standardized, intergrated, hierarchical system's approach and which can be easily tailored to custom requirements.

  7. Interlock system for machine protection of the KOMAC 100-MeV proton linac

    NASA Astrophysics Data System (ADS)

    Song, Young-Gi

    2015-02-01

    The 100-MeV proton linear accelerator of the Korea Multi-purpose Accelerator Complex (KOMAC) has been developed. The beam service started this year after performing the beam commissioning. If the very sensitive and essential equipment is to be protected during machine operation, a machine interlock system is required, and the interlock system has been implemented. The purpose of the interlock system is to shut off the beam when the radio-frequency (RF) and ion source are unstable or a beam loss occurs. The interlock signal of the KOMAC linac includes a variety of sources, such as the beam loss, RF and high-voltage converter modulator faults, and fast closing valves of the vacuum window at the beam lines and so on. This system consists of a hardware-based interlock system using analog circuits and a software-based interlock system using an industrial programmable logic controller (PLC). The hardware-based interlock system has been fabricated, and the requirement has been satisfied with the results being within 10 µs. The software logic interlock system using the PLC has been connected to the framework of with the experimental physics and industrial control system (EPICS) to integrate a variety of interlock signals and to control the machine components when an interlock occurs. This paper will describe the design and the construction of the machine interlock system for the KOMAC 100-MeV linac.

  8. Neutral beam interlock system on TFTR using infrared pyrometry

    SciTech Connect

    Medley, S.S.; Kugel, H.W.; Kozub, T.A.; Lowrance, J.L.; Mastrocola, V.; Renda, G.; Young, K.M.

    1986-06-01

    Although the region of the TFTR vacuum vessel wall which is susceptible to damage by neutral beam strike is armored with a mosaic of TiC-clad POCO graphite titles, at power deposition levels above 2.5 kW/cm/sup 2/ the armor surface temperature exceeds 1200/sup 0/C within 250 ms and itself becomes susceptible to damage. In order to protect the wall armor, a neutral beam interlock system based on infrared pyrometry measurement of the armor surface temperature was installed on TFTR. For each beamline, a three-fiber-optic telescope views three areas of approx.30 cm diameter centered on the armor hot spots for the three ion sources. Each signal is fiber-optic coupled to a remote 900 nm pyrometer which feeds analog signals to the neutral beam interrupt circuits. The pyrometer interlock system is designed to interrupt each of the twelve ion sources independently within 10 ms of the temperature exceeding a threshold settable in the range of 500 to 2300/sup 0/C. A description of the pyrometer interlock system and its performance will be presented.

  9. Neutral beam interlock system on TFTR using infrared pyrometry

    SciTech Connect

    Medley, S.S.; Kugel, H.W.; Kozub, T.A.; Lowrance, J.L.; Mastrocola, V.; Renda, G.; Young, K.M.

    1986-08-01

    Although the region of the Tokamak Fusion Test Reactor (TFTR) vacuum vessel wall which is susceptible to damage by neutral beam strike is armored with a mosaic of TiC-clad POCO graphite tiles, at power deposition levels above 2.5 kW/cm/sup 2/ the armor surface temperature exceeds 1200 /sup 0/C within 250 ms, and itself becomes susceptible to damage. In order to protect the wall armor, a neutral beam interlock system based on infrared pyrometry measurement of the armor surface temperature was installed on TFTR. For each beamline, a three-fiber-optic telescope views three areas of --30 cm diameter centered on the armor hot spots for the three ion sources. Each signal is fiber-optic coupled to a remote 900-nm pyrometer which feeds analog signals to the neutral beam interrupt circuits. The pyrometer interlock system is designed to interrupt each of the 12 ion sources independently within 10 ms of the temperature exceeding a threshold which can be set in the range of 500--2300 /sup 0/C. A description of the pyrometer interlock system and its performance will be presented.

  10. Radiation safety interlock system for Photon Factory X-ray beam lines

    NASA Astrophysics Data System (ADS)

    Satow, Yoshinori; Kosuge, Takashi; Matsushita, Tadashi

    1988-02-01

    Self-contained interlock systems for the X-ray beam lines of the Photon Factory were designed and fabricated in order to protect experimenters and the service staff from radiation hazards while at the same time providing experimenters with smooth and easy access to the synchrotron radiation sources. The interlock systems utilize programmable sequence controllers in order to meet the individual safety logic required for beam line characteristics. The environment as well as components related to the interlock systems, system features, safety logic and operating conditions are described along with the design principles. A few operational remarks concerning the interlock systems are also presented.

  11. Arc Detection and Interlock Module for the PEP II Low Level RF System

    SciTech Connect

    Tighe, R.; /SLAC

    2011-08-31

    A new arc detection and interlock generating module for the SLAC PEP-II low-level RF VXI-based system has been developed. The system is required to turn off the RF drive and high voltage power supply in the event of arcing in the cavity windows, klystron window, or circulator. Infrared photodiodes receive arc signals through radiation resistant optical fibers. Gain and bandwidth are selectable for each channel to allow tailoring response. The module also responds to interlock requests from other modules in the VXI system and communicates with the programmable logic controller (PLC) responsible for much of the low-level RF system's interlock functionality.

  12. Global ice-sheet system interlocked by sea level

    NASA Astrophysics Data System (ADS)

    Denton, George H.; Hughes, Terence J.; Karlén, Wibjörn

    1986-07-01

    Denton and Hughes (1983, Quaternary Research20, 125-144) postulated that sea level linked a global ice-sheet system with both terrestrial and grounded marine components during late Quaternary ice ages. Summer temperature changes near Northern Hemisphere melting margins initiated sea-level fluctuations that controlled marine components in both polar hemispheres. It was further proposed that variations of this ice-sheet system amplified and transmitted Milankovitch summer half-year insolation changes between 45 and 75°N into global climatic changes. New tests of this hypothesis implicate sea level as a major control of the areal extent of grounded portions of the Antarctic Ice Sheet, thus fitting the concept of a globally interlocked ice-sheet system. But recent atmospheric modeling results ( Manabe and Broccoli, 1985, Journal of Geophysical Research90, 2167-2190) suggest that factors other than areal changes of the grounded Antarctic Ice Sheet strongly influenced Southern Hemisphere climate and terminated the last ice age simultaneously in both polar hemispheres. Atmospheric carbon dioxide linked to high-latitude oceans is the most likely candidate ( Shackleton and Pisias, 1985, Atmospheric carbon dioxide, orbital forcing, and climate. In "The Carbon Cycle and Atmospheric CO 2: Natural Variations Archean to Present" (E. T. Sundquest and W. S. Broecker, Eds.), pp. 303-318. Geophysical Monograph 32, American Geophysical Union, Washington, D.C.), but another potential influence was high-frequency climatic oscillations (2500 yr). It is postulated that variations in atmospheric carbon dioxide acted through an Antarctic ice shelf linked to the grounded ice sheet to produce and terminate Southern Hemisphere ice-age climate. It is further postulated that Milankovitch summer insolation combined with a warm high-frequency oscillation caused marked recession of Northern Hemisphere ice-sheet melting margins and the North Atlantic polar front about 14,000 14C yr B.P. This

  13. Global ice-sheet system interlocked by sea level

    SciTech Connect

    Denton, G.H.; Hughes, T.J.; Karlen, W.

    1986-01-01

    Denton and Hughes postulated that sea level linked a global ice-sheet system with both terrestrial and grounded marine components during later Quaternary ice ages. Summer temperature changes near Northern Hemisphere melting margins initiated sea-level fluctuations that controlled marine components in both polar hemispheres. It was further proposed that variations of this ice-sheet system amplified and transmitted Milankovitch summer half-year insolation changes between 45 and 75/sup 0/N into global climatic changes. New tests of this hypothesis implicate sea level as a major control of the areal extent of grounded portions of the Antarctic Ice Sheet. But factors other than areal changes of the grounded Antarctic Ice Sheet may have strongly influenced Southern Hemisphere climate and terminated the last ice age simultaneously in both polar hemispheres. Atmospheric carbon dioxide linked to high-latitude oceans is the most likely candidate, but another potential influence was high-frequency climatic oscillations. It is postulated that variations in atmospheric carbon dioxide acted through an Antarctic ice shelf linked to the grounded ice sheet to produce and terminate Southern Hemisphere ice-age climate. It is further postulated that Milankovitch summer insolation combined with a warm-high frequency oscillation caused marked recession of Northern Hemisphere ice-sheet melting margins and the North Atlantic polar front about 14,000 /sup 14/C yr B.P. This permitted renewed formation of North Atlantic Deep Water, which could well have controlled atmospheric carbon dioxide. Combined melting and consequent sea-level rise from the three warming factors initiated irreversible collapse of the interlocked global ice-sheet system, which was at its largest but most vulnerable configuration.

  14. Advanced interlocking systems to improve heavy-load-bearing characteristics of flexible intramedullary nailing.

    PubMed

    Berger, Leopold; Eichler, Johannes; Ryll, E Jonathan S; Fischerauer, Stefan; Raschke, Michael J; Kolbitsch, Andreas; Castellani, Christoph; Weinberg, Annelie-Martina

    2016-11-01

    Flexible intramedullary nailing (FIN) is a minimally invasive and widespread standard method for osteosynthesis of pediatric long bone fractures. In the case of unstable fractures of the lower extremity, interlocking systems need to be used to prevent axial shortening and subsequent perforation of the nail at its insertion site. In the present study, four different screw-fixed interlocking systems for FINs (Hofer TwinPlug with two 3-mm titanium interlocking screws, Hofer FixPlug with 3-mm titanium interlocking screw, Hofer Plug with 3.5-mm titanium interlocking screw, and Hofer Plug with 3-mm titanium interlocking screw) in comparison with the commonly used Ender stainless steel nails (locked with 3.5-mm screw) were experimentally investigated in cadaveric lamb tibiae, regarding their load characteristics and failure modes in the case of heavy loading. The specimens were subjected to sequential axial cyclic loading of 5000cycles with stepwise increase of the load amplitude until failure. Migration of locking screws and internal damage of bone tissue was quantified by micro-computed tomography (CT) imaging. Ender nails failed on average at a peak load of 800 N, TwinPlugs at 1367 N, FixPlugs at 1222 N, Plugs 3.5mm at 1225 N and Plugs 3.0mm at 971 N. TwinPlugs, FixPlugs, and Plugs 3.5mm failed in a slow manner over several hundred loading cycles, whereas Ender nails and Plugs 3.0mm exhibited abrupt failure without any prior indication. Our results confirm that axial stability of FIN can be further improved by screw-fixed plugs by simultaneously avoiding shortcomings of an eye-locked system, which the Ender nails are. Considering biomechanical results, plug interlocking systems with 3.5-mm screws should be favored over conventional Ender nails and plugs with 3-mm screws.

  15. Advanced interlocking systems to improve heavy-load-bearing characteristics of flexible intramedullary nailing.

    PubMed

    Berger, Leopold; Eichler, Johannes; Ryll, E Jonathan S; Fischerauer, Stefan; Raschke, Michael J; Kolbitsch, Andreas; Castellani, Christoph; Weinberg, Annelie-Martina

    2016-11-01

    Flexible intramedullary nailing (FIN) is a minimally invasive and widespread standard method for osteosynthesis of pediatric long bone fractures. In the case of unstable fractures of the lower extremity, interlocking systems need to be used to prevent axial shortening and subsequent perforation of the nail at its insertion site. In the present study, four different screw-fixed interlocking systems for FINs (Hofer TwinPlug with two 3-mm titanium interlocking screws, Hofer FixPlug with 3-mm titanium interlocking screw, Hofer Plug with 3.5-mm titanium interlocking screw, and Hofer Plug with 3-mm titanium interlocking screw) in comparison with the commonly used Ender stainless steel nails (locked with 3.5-mm screw) were experimentally investigated in cadaveric lamb tibiae, regarding their load characteristics and failure modes in the case of heavy loading. The specimens were subjected to sequential axial cyclic loading of 5000cycles with stepwise increase of the load amplitude until failure. Migration of locking screws and internal damage of bone tissue was quantified by micro-computed tomography (CT) imaging. Ender nails failed on average at a peak load of 800 N, TwinPlugs at 1367 N, FixPlugs at 1222 N, Plugs 3.5mm at 1225 N and Plugs 3.0mm at 971 N. TwinPlugs, FixPlugs, and Plugs 3.5mm failed in a slow manner over several hundred loading cycles, whereas Ender nails and Plugs 3.0mm exhibited abrupt failure without any prior indication. Our results confirm that axial stability of FIN can be further improved by screw-fixed plugs by simultaneously avoiding shortcomings of an eye-locked system, which the Ender nails are. Considering biomechanical results, plug interlocking systems with 3.5-mm screws should be favored over conventional Ender nails and plugs with 3-mm screws. PMID:27524031

  16. NSTX Protection And Interlock Systems For Coil And Powers Supply Systems

    SciTech Connect

    X. Zhao, S. Ramakrishnan, J. Lawson, C.Neumeyer, R. Marsala, H. Schneider, Engineering Operations

    2009-09-24

    NSTX at Princeton Plasma Physics Laboratory (PPPL) requires sophisticated plasma positioning control system for stable plasma operation. TF magnetic coils and PF magnetic coils provide electromagnetic fields to position and shape the plasma vertically and horizontally respectively. NSTX utilizes twenty six coil power supplies to establish and initiate electromagnetic fields through the coil system for plasma control. A power protection and interlock system is utilized to detect power system faults and protect the TF coils and PF coils against excessive electromechanical forces, overheating, and over current. Upon detecting any fault condition the power system is restricted, and it is either prevented from initializing or suppressed to de-energize coil power during pulsing. Power fault status is immediately reported to the computer system. This paper describes the design and operation of NSTX's protection and interlocking system and possible future expansion.

  17. Software Verification and Validation Test Report for the HEPA filter Differential Pressure Fan Interlock System

    SciTech Connect

    ERMI, A.M.

    2000-09-05

    The HEPA Filter Differential Pressure Fan Interlock System PLC ladder logic software was tested using a Software Verification and Validation (V&V) Test Plan as required by the ''Computer Software Quality Assurance Requirements''. The purpose of his document is to report on the results of the software qualification.

  18. Design lessons from using programmable controllers in the MFTF-B personnel safety and interlocks system

    SciTech Connect

    Branum, J.D.

    1983-11-29

    Applying programmable controllers in critical applications such as personnel safety and interlocks systems requires special considerations in the design of both hardware and software. All modern programmable controller systems feature extensive internal diagnostic capabilities to protect against problems such as program memory errors; however most, if not all present designs lack an intrinsic capability for detecting and countering failures on the field-side of their I/O modules. Many of the most common styles of I/O modules can also introduce potentially dangerous sneak circuits, even without component failure. This paper presents the most significant lessons learned to date in the design of the MFTF-B Personnel Safety and Interlocks System, which utilizes two non-redundant programmable controllers with over 800 I/O points each. Specific problems recognized during the design process as well as those discovered during initial testing and operation are discussed along with their specific solutions in hardware and software.

  19. Interlocked molecules: Aqueous assembly

    NASA Astrophysics Data System (ADS)

    Bai, Linyi; Zhao, Yanli

    2015-12-01

    The quantitative self-assembly of mechanically interlocked molecules in water, instead of organic solvents, opens up the possibility of such systems being used in a biological context where their functions can be interfaced with biomolecular systems.

  20. Protective Interlocks and Procedures on the DIII-D ECH System

    NASA Astrophysics Data System (ADS)

    Lohr, J.; Cengher, M.; Chen, X.; Gorelov, Y.; Ponce, D.; Prater, R.; Torrezan, A.

    2015-11-01

    Several new protective interlocks are being installed on the DIII-D ECH system to increase the safety margins for plasma operations at densities approaching cutoff. Inadvertent overdense operation has resulted in reflection of an rf beam back into one of the launchers causing extensive arcing and melt damage on one waveguide line. Therefore, protective steps have been taken to reduce the risk of such damage in the future. These include a density interlock generated by the plasma control system, enhanced video monitoring of the launchers, an ambient light monitor on each of the waveguide systems and versatile rf monitors, measuring forward and reflected power in addition to the mode content of the rf beams, which are installed as the last miter bends in each waveguide line. Calculations of the rf beam trajectories in the plasmas are being performed using the TORAY ray tracing code with input from kinetic profile diagnostics, and strike points for refracted beams on the vacuum vessel are being calculated, which allows evaluating the risk of damage to sensitive diagnostics and hardware. Work supported by US DOE under DE-FC02-04ER54698.

  1. CAMAC-based interlock system for power-supply-hardware protection on MFTF

    SciTech Connect

    Strauch, M.S.

    1981-09-30

    This interlock module accepts 16 inputs and generates, in conjunction with an internal PROM map, 8 outputs. This decision process is autonomous of the CAMAC dataway and host computer. The map is generated, burned and verified by a user interactive program written to accept input/output equations in Boolean algebra. The interlock module requires the host computer to periodically interrogate it to verify proper operation of the module, host computer and date link; otherwise, permissives are dropped. An internal mask register may be used to override interlock inputs. This mask is perishable and must be constantly refreshed. Output drivers may be operated in a latch/no latch mode. This prevents outputs, once dropped, from being reasserted even if the proper input sequence is reestablished. A first-out register may be utilized to determine which input has dropped first in the event that chain reactions are developed among the interlock inputs.

  2. 20. VIEW OF NEWER 7LEVER INTERLOCKING MACHINE IN FOREGROUND, NEXT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    20. VIEW OF NEWER 7-LEVER INTERLOCKING MACHINE IN FOREGROUND, NEXT TO ORIGINAL INTERLOCKING MACHINE, THIRD FLOOR - South Station Tower No. 1 & Interlocking System, Dewey Square, Boston, Suffolk County, MA

  3. Definition and means of maintaining the process vacuum liquid detection interlock systems portion of the PFP safety envelope

    SciTech Connect

    Thomas, R.J.

    1997-01-02

    The Process Vacuum Liquid Detection interlock systems prevent intrusion of process liquids into the HEPA filters downstream of demisters {number_sign}6 and {number_sign}7 during Process Vacuum System operation. This prevents liquid intrusion into the filters which could cause a criticality. The Safety Envelope (SE) includes the equipment which detects the presence of liquids in the vacuum headers; isolates the filters; shuts down the vacuum pumps; and alarms the condition. The presence of liquid in the HC-4, HC-7, and HC-227S glovebox vacuum traps or a high level of liquid in the 236-Z Tank 50 will isolate these portions of the vacuum system from the main headers. This report identifies the equipment in the SE; operating, maintenance, and surveillance procedures needed to maintain the SE equipment; and rationale for exclusion of some equipment and testing from the SE.

  4. Interlocking wettable ceramic tiles

    SciTech Connect

    Tabereaux, Jr., Alton T.; Fredrickson, Guy L.; Groat, Eric; Mroz, Thomas; Ulicny, Alan; Walker, Mark F.

    2005-03-08

    An electrolytic cell for the reduction of aluminum having a layer of interlocking cathode tiles positioned on a cathode block. Each tile includes a main body and a vertical restraining member to prevent movement of the tiles away from the cathode block during operation of the cell. The anode of the electrolytic cell may be positioned about 1 inch from the interlocking cathode tiles.

  5. Alcohol ignition interlock programs.

    PubMed

    Beirness, D J; Marques, P R

    2004-09-01

    The alcohol ignition interlock is an in-vehicle DWI control device that prevents a car from starting until the operator provides a breath alcohol concentration (BAC) test below a set level, usually .02% (20 mg/dl) to .04% (40 mg/dl). The first interlock program was begun as a pilot test in California 18 years ago; today all but a few US states, and Canadian provinces have interlock enabling legislation. Sweden has recently implemented a nationwide interlock program. Other nations of the European Union and as well as several Australian states are testing it on a small scale or through pilot research. This article describes the interlock device and reviews the development and current status of interlock programs including their public safety benefit and the public practice impediments to more widespread adoption of these DWI control devices. Included in this review are (1) a discussion of the technological breakthroughs and certification standards that gave rise to the design features of equipment that is in widespread use today; (2) a commentary on the growing level of adoption of interlocks by governments despite the judicial and legislative practices that prevent more widespread use of them; (3) a brief overview of the extant literature documenting a high degree of interlock efficacy while installed, and the rapid loss of their preventative effect on repeat DWI once they are removed from the vehicles; (4) a discussion of the representativeness of subjects in the current research studies; (5) a discussion of research innovations, including motivational intervention efforts that may extend the controlling effect of the interlock, and data mining research that has uncovered ways to use the stored interlock data record of BAC tests in order to predict high risk drivers; and (6) a discussion of communication barriers and conceptual rigidities that may be preventing the alcohol ignition interlock from taking a more prominent role in the arsenal of tools used to control

  6. Operability of the Ventilation Continuous Air Monitor (CAM) Interlock Analysis of Proposed Upgrade to the 241AW Farm Primary Exhauster CAM System

    SciTech Connect

    GUSTAVSON, R.D.

    2002-06-19

    The Tank Farms Final Safety Analysis (FSAR) assumes that a ventilation stack Continuous Air Monitor (CAM) interlock system detects high radiation in the exhaust stream and shuts off the associated ventilation system within 10 minutes of a High-Efficiency Particulate Air (HEPA) filter system failure (CHG, 2002). Previous analysis of the as-built CAM system on the AW Farm Primary Exhauster (stack 296-A-27) showed that this system potentially required significantly longer than 10 minutes to detect a HEPA filter failure and initiate shutdown of the ventilation system (Short, 2002). The purpose of this report is to determine the CAM interlock system response time for a proposed upgrade of the 296-A-27 CAM system. The approach to be used in this analysis is essentially the same as used in RPP-10799, Rev. 0 (Short, 2002), which is to conservatively estimate the time required by the proposed upgraded CAM sampling/monitoring system to detect a FSAR-defined HEPA filter failure and automatically shutdown the exhaust fan. For the HEPA filter failure over-temperature accident scenario in the FSAR, the upgraded CAM system on the AW Farm Primary Exhauster will require significantly less than 10 minutes to detect a HEPA filter failure, actuate the CAM Interlock, and shutdown the exhauster fan. Therefore, the analyzed system is adequate to meet the operability requirements specified in the FSAR and the Tank Farms Technical Safety Requirements (CHG, 2001; CHG, 2002).

  7. Using the Five Faces of Oppression to Teach about Interlocking Systems of Oppression

    ERIC Educational Resources Information Center

    Shlasko, Davey

    2015-01-01

    In social justice education a tension sometimes emerges between the complex ideas we want participants to grapple with and the relatively straightforward activities we use to communicate those ideas. We adapt learning activities to meet participants' evolving needs and to communicate emerging theories and analyses, but sometimes adjusting an…

  8. Active Esters as Pseudostoppers for Slippage Synthesis of [2]Pseudorotaxane Building Blocks: A Straightforward Route to Multi-Interlocked Molecular Machines.

    PubMed

    Legigan, Thibaut; Riss-Yaw, Benjamin; Clavel, Caroline; Coutrot, Frédéric

    2016-06-20

    The efficient synthesis and very easy isolation of dibenzo[24]crown-8-based [2]pseudorotaxane building blocks that contain an active ester motif at the extremity of the encircled molecular axle and an ammonium moiety as a template for the dibenzo[24]crown-8 is reported. The active ester acts both as a semistopper for the [2]pseudorotaxane species and as an extensible extremity. Among the various investigated active ester moieties, those that allow for the slippage process are given particular focus because this strategy produces fewer side products. Extension of the selected N-hydroxysuccinimide ester based pseudorotaxane building block by using either a mono- or a diamino compound, both containing a triazolium moiety, is also described. These provide a pH-dependent two-station [2]rotaxane molecular machine and a palindromic [3]rotaxane molecular machine, respectively. Molecular machinery on both interlocked compounds through variation of pH was studied and characterized by means of NMR spectroscopy. PMID:27239975

  9. Active Esters as Pseudostoppers for Slippage Synthesis of [2]Pseudorotaxane Building Blocks: A Straightforward Route to Multi-Interlocked Molecular Machines.

    PubMed

    Legigan, Thibaut; Riss-Yaw, Benjamin; Clavel, Caroline; Coutrot, Frédéric

    2016-06-20

    The efficient synthesis and very easy isolation of dibenzo[24]crown-8-based [2]pseudorotaxane building blocks that contain an active ester motif at the extremity of the encircled molecular axle and an ammonium moiety as a template for the dibenzo[24]crown-8 is reported. The active ester acts both as a semistopper for the [2]pseudorotaxane species and as an extensible extremity. Among the various investigated active ester moieties, those that allow for the slippage process are given particular focus because this strategy produces fewer side products. Extension of the selected N-hydroxysuccinimide ester based pseudorotaxane building block by using either a mono- or a diamino compound, both containing a triazolium moiety, is also described. These provide a pH-dependent two-station [2]rotaxane molecular machine and a palindromic [3]rotaxane molecular machine, respectively. Molecular machinery on both interlocked compounds through variation of pH was studied and characterized by means of NMR spectroscopy.

  10. 49 CFR 236.312 - Movable bridge, interlocking of signal appliances with bridge devices.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 4 2014-10-01 2014-10-01 false Movable bridge, interlocking of signal appliances with bridge devices. 236.312 Section 236.312 Transportation Other Regulations Relating to... SYSTEMS, DEVICES, AND APPLIANCES Interlocking Standards § 236.312 Movable bridge, interlocking of...

  11. 49 CFR 236.312 - Movable bridge, interlocking of signal appliances with bridge devices.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 4 2013-10-01 2013-10-01 false Movable bridge, interlocking of signal appliances with bridge devices. 236.312 Section 236.312 Transportation Other Regulations Relating to... SYSTEMS, DEVICES, AND APPLIANCES Interlocking Standards § 236.312 Movable bridge, interlocking of...

  12. 49 CFR 236.312 - Movable bridge, interlocking of signal appliances with bridge devices.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 4 2011-10-01 2011-10-01 false Movable bridge, interlocking of signal appliances with bridge devices. 236.312 Section 236.312 Transportation Other Regulations Relating to... SYSTEMS, DEVICES, AND APPLIANCES Interlocking Standards § 236.312 Movable bridge, interlocking of...

  13. 49 CFR 236.312 - Movable bridge, interlocking of signal appliances with bridge devices.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Movable bridge, interlocking of signal appliances with bridge devices. 236.312 Section 236.312 Transportation Other Regulations Relating to... SYSTEMS, DEVICES, AND APPLIANCES Interlocking Standards § 236.312 Movable bridge, interlocking of...

  14. 49 CFR 236.312 - Movable bridge, interlocking of signal appliances with bridge devices.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 4 2012-10-01 2012-10-01 false Movable bridge, interlocking of signal appliances with bridge devices. 236.312 Section 236.312 Transportation Other Regulations Relating to... SYSTEMS, DEVICES, AND APPLIANCES Interlocking Standards § 236.312 Movable bridge, interlocking of...

  15. Administrative Reinstatement Interlock Programs: Florida, a 10-Year Study

    PubMed Central

    Voas, Robert B.; Tippetts, A. Scott; Grosz, Milton

    2013-01-01

    Background Interlocks reduce driving-under-the-influence (DUI) recidivism by 64%, but offenders resist installing them, preferring to risk driving while their driver’s licenses are revoked. One method of motivating offenders to install an interlock is require it for reinstatement of their driver’s license. This report updates an earlier evaluation of the administrative reinstatement interlock program (ARIP) procedure implemented in Florida in 2002. Method Driver records and interlock program records covering 120,000 DUI offenders were followed over 10 years. The flow through the sanction system—conviction, reinstatement, interlock program, and postinterlock period—is described. Logistical regression was used to identify the characteristics of offenders who installed interlocks, and survival analysis was used to evaluate the recidivism of offenders in the various stages in the ARIP. Results At any given time, approximately one third of the convicted offenders were serving their license-revocation periods. Half of the offenders who completed their revocation periods remain unqualified for reinstatement because they do not fulfill other requirements. ARIP offenders who do qualify for reinstatement and install interlocks have lower recidivism rates while the devices are on their vehicles. Conclusions After 10 years, Florida’s ARIP is a mature system that succeeds in forcing all offenders in the program who qualify for reinstatement to install an interlock for at least 6 months. However, half of all offenders who complete their mandatory revocation period are either unable to, or choose not to, qualify for reinstatement. PMID:23442206

  16. Mechanically interlocked DNA nanostructures for functional devices.

    PubMed

    Jester, Stefan-S; Famulok, Michael

    2014-06-17

    CONSPECTUS: Self-assembled functional DNA oligonucleotide based architectures represent highly promising candidates for the creation of nanoscale devices. The field of DNA nanotechnology has emerged to a high level of maturity and currently constitutes one of the most dynamic, creative, and exciting modern research areas. The transformation from structural DNA nanotechnology to functional DNA architectures is already taking place with tremendous pace. Particularly the advent of DNA origami technology has propelled DNA nanotechnology forward. DNA origami provided a versatile method for precisely aligning structural and functional DNA modules in two and three dimensions, thereby serving as a means for constructing scaffolds and chassis required for the precise orchestration of multiple functional DNA architectures. Key modules of these will contain interlocked nanomechanical components made of DNA. The mechanical interlocking allows for performing highly specific and controlled motion, by reducing the dimensionality of diffusion-controlled processes without restrictions in motional flexibility. Examples for nanoscale interlocked DNA architectures illustrate how elementary functional units of future nanomachines can be designed and realized, and show what role interlocked DNA architectures may play in this endeavor. Functional supramolecular systems, in general, and nanomachinery, in particular, self-organize into architectures that reflect different levels of complexity with respect to their function, their arrangement in the second and third dimension, their suitability for different purposes, and their functional interplay. Toward this goal, DNA nanotechnology and especially the DNA origami technology provide opportunities for nanomechanics, nanorobotics, and nanomachines. In this Account, we address approaches that apply to the construction of interlocked DNA nanostructures, drawing largely form our own contributions to interlocked architectures based on double

  17. Interlocked positive and negative feedback network motifs regulate β-catenin activity in the adherens junction pathway

    PubMed Central

    Klinke, David J.; Horvath, Nicholas; Cuppett, Vanessa; Wu, Yueting; Deng, Wentao; Kanj, Rania

    2015-01-01

    The integrity of epithelial tissue architecture is maintained through adherens junctions that are created through extracellular homotypic protein–protein interactions between cadherin molecules. Cadherins also provide an intracellular scaffold for the formation of a multiprotein complex that contains signaling proteins, including β-catenin. Environmental factors and controlled tissue reorganization disrupt adherens junctions by cleaving the extracellular binding domain and initiating a series of transcriptional events that aim to restore tissue homeostasis. However, it remains unclear how alterations in cell adhesion coordinate transcriptional events, including those mediated by β-catenin in this pathway. Here were used quantitative single-cell and population-level in vitro assays to quantify the endogenous pathway dynamics after the proteolytic disruption of the adherens junctions. Using prior knowledge of isolated elements of the overall network, we interpreted these data using in silico model-based inference to identify the topology of the regulatory network. Collectively the data suggest that the regulatory network contains interlocked network motifs consisting of a positive feedback loop, which is used to restore the integrity of adherens junctions, and a negative feedback loop, which is used to limit β-catenin–induced gene expression. PMID:26224311

  18. Enhancing the Use of Vehicle Alcohol Interlocks With Emerging Technology

    PubMed Central

    Voas, Robert B.

    2014-01-01

    Among the earliest applications of health technologies to a safety program was the development of blood alcohol content (BAC) tests for use in impaired-driving enforcement. This led to the development of miniature, highly accurate devices that officers could carry in their pockets. A natural extension of this technology was the vehicle alcohol interlock, which is used to reduce recidivism among drivers convicted of driving under the influence (DUI) by requiring them to install the devices (which will not allow someone with a positive BAC to drive) on their vehicles. While on the vehicle, interlocks have been shown to reduce recidivism by two-thirds. Use of these devices has been growing at the rate of 10 to 15 percent a year, and there currently are more than 300,000 units in use. This expansion in the application of interlocks has benefited from the integration of other emerging technologies into interlock systems. Such technologies include data systems that record both driver actions and vehicle responses, miniature cameras and face recognition to identify the user, Wi-Fi systems to provide rapid reporting on offender performance and any attempt to circumvent the device, GPS tracking of the vehicle, and more rapid means for monitoring the integrity of the interlock system. This article describes how these health technologies are being applied in interlock programs and the outlook for new technologies and new court sanctioning programs that may influence the growth in the use of interlocks in the future. PMID:26259002

  19. 9. VIEW, LOOKING NORTHWEST, SHOWING PIPING FOR INTERLOCKING AND SIGNALLING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    9. VIEW, LOOKING NORTHWEST, SHOWING PIPING FOR INTERLOCKING AND SIGNALLING SYSTEM - New York, New Haven & Hartford Railroad, Niantic Bridge, Spanning Niantic River between East Lyme & Waterford, Old Lyme, New London County, CT

  20. Dynamics of the interlocked positive feedback loops explaining the robust epigenetic switching in Candida albicans.

    PubMed

    Sriram, K; Soliman, Sylvain; Fages, François

    2009-05-01

    The two element mutual activation and inhibitory positive feedback loops are a common motifs that occur in many biological systems in both isolated and interlocked form, as for example, in the cell division cycle and thymus differentiation in eukaryotes. The properties of three element interlocked positive feedback loops that embeds both mutual activation and inhibition are studied in depth for their bistable properties by performing bifurcation and stochastic simulations. Codimension one and two bifurcations reveal important properties like robustness to parameter variations and adaptability under various conditions by its ability to fine tune the threshold to a wide range of values and to maintain a wide bistable regime. Furthermore, we show that in the interlocked circuit, mutual inhibition controls the decision to switch from OFF to ON state, while mutual activation enforces the decision. This view is supported through a concrete biological example Candida albicans, a human fungal pathogen that can exist in two distinctive cell types; one in the default white state and the other in an opaque form. Stochastic switching between these two forms takes place due to the epigenetic alternation induced by the transcriptional regulators in the circuit, albeit without any rearrangement of the nuclear chromosomes. The transcriptional regulators constitute interlocked mutual activation and inhibition feedback circuits that provide adaptable threshold and wide bistable regime. These positive feedback loops are shown to be responsible for robust noise induced transitions without chattering, persistence of particular phenotypes for many generations and selective exhibition of one particular form of phenotype when mutated. Finally, we propose for synthetic biology constructs to use interlocked positive feedback loops instead of two element positive feedback loops because they are better controlled than isolated mutual activation and mutual inhibition feedback circuits. PMID

  1. Synthesis of interlocked molecules by olefin metathesis

    NASA Astrophysics Data System (ADS)

    Clark, Paul Gregory

    A large body of work in the Grubbs group has focused on the development of functional-group tolerant ruthenium alkylidene catalysts that perform a number of olefin metathesis reactions. These catalysts have seen application in a wide range of fields, including classic total synthesis as well as polymer and materials chemistry. One particular family of compounds, interlocked molecules, has benefitted greatly from these advances in catalyst stability and activity. This thesis describes several elusive and challenging interlocked architectures whose syntheses have been realized through the utilization of different types of ruthenium-catalyzed olefin metathesis reactions. Ring-closing olefin metathesis has enabled the synthesis of a [c2]daisy-chain dimer with the ammonium binding site near the cap of the dimer. A deprotonated DCD possessing such a structural attribute will more forcefully seek to restore coordinating interactions upon reprotonation, enhancing its utility as a synthetic molecular actuator. Dimer functionalization facilitated incorporation into linear polymers, with a 48% size increase of an unbound, extended analogue of the polymer demonstrating slippage of the dimer units. Ongoing work is directed at further materials studies, in particular, exploring the synthesis of macroscopic networks containing the DCD units and analyzing the correlation between molecular-scale extension-contraction manipulations and resulting macro-scale changes. A "clipping" approach to a polycatenated cyclic polymer, a structure that resembles a molecular "charm bracelet", has been described. The use of ring-opening metathesis polymerization of a carbamate monomer in the presence of a chain transfer agent allowed for the synthesis of a linear polymer that was subsequently functionalized and cyclized to the corresponding cyclic analogue. This cyclic polymer was characterized through a variety of techniques, and subjected to further functionalization reactions, affording a cyclic

  2. PBS machine interlocks using EWMA.

    PubMed

    Clasie, Benjamin M; Kooy, Hanne M; Flanz, Jacob B

    2016-01-01

    Delivery of pencil beam scanning (PBS) requires the on-line measurement of several beam parameters. If the measurement is outside of specified tolerances and a binary threshold algorithm is used, the beam will be paused. Given instrumentation and statistical noise such a system can lead to many pauses which could increase the treatment time. Statistical quality control methods are typically used on manufacturing lines to monitor a process and give early detection of a gradual problem and stop the process if a deviation is statistically significant. These methods can be used to develop a more intuitive algorithm for (PBS) delivery systems that is robust and safe and leads to decreased treatment times. The Exponentially Weighted Moving Average (EWMA) control scheme monitors deviations in beam properties which are averaged over a specified number of measurements with greater weight applied to the more recent ones. Simulation of an EWMA-style algorithm safely detected shifts in random and systematic delivery errors without false alarms. Binary and EWMA methods can be combined for improved reliability without sacrificing patient safety. In the EWMA method, the mean of a beam property can be related to systematic uncertainties and the standard deviation can be related to random uncertainties. This method allows one to have separate interlock levels for each type of uncertainty and to detect systematic trends. PMID:26674990

  3. PBS machine interlocks using EWMA

    NASA Astrophysics Data System (ADS)

    Clasie, Benjamin M.; Kooy, Hanne M.; Flanz, Jacob B.

    2016-01-01

    Delivery of pencil beam scanning (PBS) requires the on-line measurement of several beam parameters. If the measurement is outside of specified tolerances and a binary threshold algorithm is used, the beam will be paused. Given instrumentation and statistical noise such a system can lead to many pauses which could increase the treatment time. Statistical quality control methods are typically used on manufacturing lines to monitor a process and give early detection of a gradual problem and stop the process if a deviation is statistically significant. These methods can be used to develop a more intuitive algorithm for (PBS) delivery systems that is robust and safe and leads to decreased treatment times. The Exponentially Weighted Moving Average (EWMA) control scheme monitors deviations in beam properties which are averaged over a specified number of measurements with greater weight applied to the more recent ones. Simulation of an EWMA-style algorithm safely detected shifts in random and systematic delivery errors without false alarms. Binary and EWMA methods can be combined for improved reliability without sacrificing patient safety. In the EWMA method, the mean of a beam property can be related to systematic uncertainties and the standard deviation can be related to random uncertainties. This method allows one to have separate interlock levels for each type of uncertainty and to detect systematic trends.

  4. Mechanically Interlocked Molecules Assembled by π–π Recognition

    SciTech Connect

    Barin, Gokhan; Coskun, Ali; Fouda, Moustafa M. G.; Stoddart, J. Fraser

    2012-02-28

    The beauty and utility of interlocked architectures have been making their way relentlessly into chemistry in the form of mechanically interlocked molecules (MIMs) for almost half a century now. Few would challenge the assertion that the emergence of template-directed synthetic protocols has aided and abetted the facile and efficient construction of MIMs compared with the statistical approaches employed while the field was still in its infancy. To date, a panoply of MIMs has been created in the wake of emerging recognition motifs and the template-directed synthetic protocols they have forged. Among these motifs, those dependent on π–π stacking in the form of donor–acceptor interactions have played an important role in the increasingly rapid development of the field. The few integrated systems that have so far emerged based on this class of MIMs demonstrate their ability to act as active components in many potential applications. This review focuses on the progress which has been accomplished during the past decade involving MIMs comprising aromatic π–π stacking interactions. While progress has been remarkable, opportunities still abound for MIMs assembled by π–π recognition.

  5. 49 CFR 236.751 - Interlocking, manual.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Interlocking, manual. 236.751 Section 236.751 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION... Interlocking, manual. An arrangement of signals and signal appliances operated from an interlocking machine...

  6. Ferrocene-containing non-interlocked molecular machines.

    PubMed

    Scottwell, Synøve Ø; Crowley, James D

    2016-02-11

    Ferrocene is the prototypical organometallic sandwich complex and despite over 60 years passing since the discovery and elucidation of ferrocene's structure, research into ferrocene-containing compounds continues to grow as potential new applications in catalysis, biology and the material sciences are found. Ferrocene is chemically robust and readily functionalized which enables its facile incorporation into more complex molecular systems. This coupled with ferrocene's reversible redox properties and ability function as a "molecular ball bearing" has led to the use of ferrocene as a component in wide range of interlocked and non-interlocked synthetic molecular machine systems. This review will focus on the exploitation of ferrocene (and related sandwich complexes) for the development of non-interlocked synthetic molecular machines.

  7. 46 CFR 111.91-1 - Power, control, and interlock circuits.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... ELECTRIC SYSTEMS-GENERAL REQUIREMENTS Elevators and Dumbwaiters § 111.91-1 Power, control, and interlock circuits. Each electric power, control, and interlock circuit of an elevator or dumbwaiter must meet ASME A17.1 (incorporated by reference; see 46 CFR 110.10-1)....

  8. An Activity-Based Learning Approach for Key Geographical Information Systems (GIS) Concepts

    ERIC Educational Resources Information Center

    Srivastava, Sanjeev Kumar; Tait, Cynthia

    2012-01-01

    This study presents the effect of active learning methods of concepts in geographical information systems where students participated in a series of interlocked learning experiences. These activities spanned several teaching weeks and involved the creation of a hand drawn map that was scanned and geo-referenced with locations' coordinates derived…

  9. Flammable gas interlock spoolpiece flow response test plan and procedure

    SciTech Connect

    Schneider, T.C., Fluor Daniel Hanford

    1997-02-13

    The purpose of this test plan and procedure is to test the Whittaker electrochemical cell and the Sierra Monitor Corp. flammable gas monitors in a simulated field flow configuration. The sensors are used on the Rotary Mode Core Sampling (RMCS) Flammable Gas Interlock (FGI), to detect flammable gases, including hydrogen and teminate the core sampling activity at a predetermined concentration level.

  10. 2. ENVIRONMENT, FROM SOUTHEAST, SHOWING B&P INTERLOCKING TOWER, AUXILIARY INTERLOCKING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    2. ENVIRONMENT, FROM SOUTHEAST, SHOWING B&P INTERLOCKING TOWER, AUXILIARY INTERLOCKING BUILDING, AND POWER SUBSTATION - Baltimore & Potomac Interlocking Tower, Adjacent to AMTRAK railroad tracks in block bounded by Howard Street, Jones Falls Expressway, Maryland Avenue & Falls Road, Baltimore, Independent City, MD

  11. 49 CFR 236.772 - Machine, interlocking.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 4 2012-10-01 2012-10-01 false Machine, interlocking. 236.772 Section 236.772 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION... Machine, interlocking. An assemblage of manually operated levers or other devices for the control...

  12. 49 CFR 236.772 - Machine, interlocking.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 4 2014-10-01 2014-10-01 false Machine, interlocking. 236.772 Section 236.772 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION... Machine, interlocking. An assemblage of manually operated levers or other devices for the control...

  13. 49 CFR 236.772 - Machine, interlocking.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Machine, interlocking. 236.772 Section 236.772 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION... Machine, interlocking. An assemblage of manually operated levers or other devices for the control...

  14. 49 CFR 236.772 - Machine, interlocking.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 4 2013-10-01 2013-10-01 false Machine, interlocking. 236.772 Section 236.772 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION... Machine, interlocking. An assemblage of manually operated levers or other devices for the control...

  15. 49 CFR 236.772 - Machine, interlocking.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 4 2011-10-01 2011-10-01 false Machine, interlocking. 236.772 Section 236.772 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION... Machine, interlocking. An assemblage of manually operated levers or other devices for the control...

  16. 76 FR 42767 - Management Officials Interlocks

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-19

    ... Office of Thrift Supervision Management Officials Interlocks AGENCY: Office of Thrift Supervision (OTS... Management and Budget (OMB) for review, as required by the Paperwork Reduction Act. Today, OTS is soliciting...: Management Officials Interlocks. OMB Number: 1550-0051. Form Number: N/A. Description: OTS uses the...

  17. Interlocked fabric and laminated fabric Kevlar 49/epoxy composites

    SciTech Connect

    Guess, T.R.; Reedy, E.D. Jr.

    1988-01-01

    The mechanical behavior of a novel interlocked fabric reinforced Kevlar 49/epoxy composite has been measured and compared to those of a laminated Kevlar 49 fabric composite (which served as a reference material). Both composites were 5.0 mm thick, contained the same 50% in-plane fiber volume fraction and were fabricated in a similar manner using the same Dow DER 332 epoxy, Jeffamine T403-hardened resin system. The reference material (Material 1) was reinforced with seven plies of Dupont style 1033 Kevlar 49 fabric. A photomicrograph of a section polished parallel to one of the fiber directions is shown. The interlocked fabric was designed and woven for Sandia National Laboratories by Albany International Research Co., Dedham, MA. The main design criterion was to duplicate a sewn through-the-thickness fabric used in preliminary studies. The interlocked fabric composite (Material 2) contains roughly 4% by volume of through-the-thickness fiber reinforcement for the purpose of improving interlaminar strength. A photomicrograph of a section showing the warp-aligned binder yarns interlocking the six fabric plies together is shown. 2 refs., 8 figs.

  18. Scoping decision document for HEPA filter differential pressure interlock control installation and tank farm exhauster operation

    SciTech Connect

    GUSTAVSON, R.D.

    2001-06-27

    This document is a decision document regarding the scope of HEPA filter differential pressure interlock system installations at Tank Farm emission units. It is intended to provide supporting information for administration of Baseline Change Request.

  19. Artificial nanomachines based on interlocked molecular species: recent advances.

    PubMed

    Balzani, Vincenzo; Credi, Alberto; Silvi, Serena; Venturi, Margherita

    2006-11-01

    The bottom-up construction and operation of nanoscale machines and motors, that is, supramolecular systems wherein the molecular components can be set in motion in a controlled manner for ultimately accomplishing a function, is a topic of great interest in nanoscience and a fascinating challenge of nanotechnology. The field of artificial molecular machines and motors is growing at an astonishing rate and is attracting a great deal of interest. Research in the last decade has shown that species made of interlocked molecular components like rotaxanes, catenanes and related systems are most attractive candidates. In recent times, the evolution of the structural and functional design of such systems has led to the construction and operation of complex molecular machines that, in some cases, are able to do specific tasks. This tutorial review is intended to discuss the design principles for nanomachines based on interlocked molecules, and to provide a timely overview on representative prototype systems.

  20. NATIONAL SYNCHROTRON LIGHT SOURCE MEDICAL PERSONNEL PROTECTION INTERLOCK

    SciTech Connect

    BUDA,S.; GMUR,N.F.; LARSON,R.; THOMLINSON,W.

    1998-11-03

    This report is founded on reports written in April 1987 by Robert Hettel for angiography operations at the Stanford Synchrotron Research Laboratory (SSRL) and a subsequent report covering angiography operations at the National Synchrotron Light Source (NSLS); BNL Informal Report 47681, June 1992. The latter report has now been rewritten in order to accurately reflect the design and installation of a new medical safety system at the NSLS X17B2 beamline Synchrotron Medical Research Facility (SMERF). Known originally as the Angiography Personnel Protection Interlock (APPI), this system has been modified to incorporate other medical imaging research programs on the same beamline and thus the name has been changed to the more generic Medical Personnel Protection Interlock (MPPI). This report will deal almost exclusively with the human imaging (angiography, bronchography, mammography) aspects of the safety system, but will briefly explain the modular aspects of the system allowing other medical experiments to be incorporated.

  1. Engineering of interlocked DNA G-quadruplexes as a robust scaffold.

    PubMed

    Phan, Anh Tuân; Do, Ngoc Quang

    2013-02-01

    Interlock is a structural element in DNA G-quadruplexes that can be compared with the commonly used complementary binding of 'sticky ends' in DNA duplexes. G-quadruplex interlocking can be a basis for the assembly of higher-order structures. In this study, we formulated a rule to engineer (3 + 1) interlocked dimeric G-quadruplexes and established the folding topology of the designed DNA sequences by nuclear magnetic resonance spectroscopy. These interlocked G-quadruplexes are very stable and can serve as compact robust scaffolds for various applications. Different structural elements can be engineered in these robust scaffolds. We demonstrated the anti-HIV inhibition activity of the newly designed DNA sequences. PMID:23275539

  2. Interlocking egg-crate type grid assembly

    DOEpatents

    Kast, S.J.

    1985-03-15

    Disclosed is an interlocking egg-crate hexagonal grid for supporting a nuclear fuel pin in a hexagonal array. The grid is formed from strips bent at an angle of about 120/sup 0/ at each vertex. Over some faces of each hexagonal cell the strips are coplanar but are arranged, by stacking interlocking, to avoid any double thickness of metal in that plane. Springs and dimples are formed in the faces of each cell to hold the fuel pin substantially centered.

  3. Interlocking egg-crate type grid assembly

    DOEpatents

    Kast, Steven J.

    1987-01-01

    Disclosed is an interlocking egg-crate hexagonal grid for supporting a nuclear fuel pin in a hexagonal array. The grid is formed from strips bent at an angle of about 120.degree. at each vertex. Over some faces of each hexagonal cell the strips are coplanar but are arranged, by stacking and interlocking, to avoid any double thickness of metal in that plane. Springs and dimples are formed in the faces of each cell to hold the fuel pin substantially centered.

  4. Flammable gas interlock spoolpiece flow response test report

    SciTech Connect

    Schneider, T.C., Fluor Daniel Hanford

    1997-03-24

    The purpose of this test report is to document the testing performed under the guidance of HNF-SD-WM-TC-073, {ital Flammable Gas Interlock Spoolpiece Flow Response Test Plan and Procedure}. This testing was performed for Lockheed Martin Hanford Characterization Projects Operations (CPO) in support of Rotary Mode Core Sampling jointly by SGN Eurisys Services Corporation and Numatec Hanford Company. The testing was conducted in the 305 building Engineering Testing Laboratory (ETL). NHC provides the engineering and technical support for the 305 ETL. The key personnel identified for the performance of this task are as follows: Test responsible engineering manager, C. E. Hanson; Flammable Gas Interlock Design Authority, G. P. Janicek; 305 ETL responsible manager, N. J. Schliebe; Cognizant RMCS exhauster engineer, E. J. Waldo/J. D. Robinson; Cognizant 305 ETL engineer, K. S. Witwer; Test director, T. C. Schneider. Other support personnel were supplied, as necessary, from 305/306 ETL. The testing, on the flammable Gas Interlock (FGI) system spoolpiece required to support Rotary Mode Core Sampling (RMCS) of single shell flammable gas watch list tanks, took place between 2-13-97 and 2-25-97.

  5. 75 FR 61820 - Model Specifications for Breath Alcohol Ignition Interlock Devices (BAIIDs)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-10-06

    ... Specifications for Breath Alcohol Ignition Interlock Devices (BAIIDs). (57 FR 11772.) Ignition interlocks are... National Highway Traffic Safety Administration Model Specifications for Breath Alcohol Ignition Interlock... Breath Alcohol Ignition Interlock Devices (BAIIDs). The Model Specifications are guidelines for...

  6. 12 CFR 303.249 - Management official interlocks.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... interlock pursuant to the Depository Institutions Management Interlocks Act (12 U.S.C. 3207), section 13 of the FDI Act (12 U.S.C. 1823(k)) and part 348 of this chapter (12 CFR part 348). (b) Where to file... 12 Banks and Banking 5 2013-01-01 2013-01-01 false Management official interlocks. 303.249...

  7. 12 CFR 303.249 - Management official interlocks.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... interlock pursuant to the Depository Institutions Management Interlocks Act (12 U.S.C. 3207), section 13 of the FDI Act (12 U.S.C. 1823(k)) and part 348 of this chapter (12 CFR part 348). (b) Where to file... 12 Banks and Banking 5 2014-01-01 2014-01-01 false Management official interlocks. 303.249...

  8. 12 CFR 303.249 - Management official interlocks.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... interlock pursuant to the Depository Institutions Management Interlocks Act (12 U.S.C. 3207), section 13 of the FDI Act (12 U.S.C. 1823(k)) and part 348 of this chapter (12 CFR part 348). (b) Where to file... 12 Banks and Banking 4 2011-01-01 2011-01-01 false Management official interlocks. 303.249...

  9. 12 CFR 303.249 - Management official interlocks.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... interlock pursuant to the Depository Institutions Management Interlocks Act (12 U.S.C. 3207), section 13 of the FDI Act (12 U.S.C. 1823(k)) and part 348 of this chapter (12 CFR part 348). (b) Where to file... 12 Banks and Banking 4 2010-01-01 2010-01-01 false Management official interlocks. 303.249...

  10. 12 CFR 303.249 - Management official interlocks.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... interlock pursuant to the Depository Institutions Management Interlocks Act (12 U.S.C. 3207), section 13 of the FDI Act (12 U.S.C. 1823(k)) and part 348 of this chapter (12 CFR part 348). (b) Where to file... 12 Banks and Banking 5 2012-01-01 2012-01-01 false Management official interlocks. 303.249...

  11. 12 CFR 348.4 - Interlocking relationships permitted by statute.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 12 Banks and Banking 4 2010-01-01 2010-01-01 false Interlocking relationships permitted by statute. 348.4 Section 348.4 Banks and Banking FEDERAL DEPOSIT INSURANCE CORPORATION REGULATIONS AND STATEMENTS OF GENERAL POLICY MANAGEMENT OFFICIAL INTERLOCKS § 348.4 Interlocking relationships permitted...

  12. 12 CFR 26.4 - Interlocking relationships permitted by statute.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 12 Banks and Banking 1 2010-01-01 2010-01-01 false Interlocking relationships permitted by statute. 26.4 Section 26.4 Banks and Banking COMPTROLLER OF THE CURRENCY, DEPARTMENT OF THE TREASURY MANAGEMENT OFFICIAL INTERLOCKS § 26.4 Interlocking relationships permitted by statute. The prohibitions...

  13. 12 CFR 563f.4 - Interlocking relationships permitted by statute.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Interlocking relationships permitted by statute. 563f.4 Section 563f.4 Banks and Banking OFFICE OF THRIFT SUPERVISION, DEPARTMENT OF THE TREASURY MANAGEMENT OFFICIAL INTERLOCKS § 563f.4 Interlocking relationships permitted by statute. The prohibitions...

  14. 12 CFR 711.4 - Interlocking relationships permitted by statute.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Interlocking relationships permitted by statute. 711.4 Section 711.4 Banks and Banking NATIONAL CREDIT UNION ADMINISTRATION REGULATIONS AFFECTING CREDIT UNIONS MANAGEMENT OFFICIAL INTERLOCKS § 711.4 Interlocking relationships permitted by statute....

  15. 21 CFR 876.4590 - Interlocking urethral sound.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Interlocking urethral sound. 876.4590 Section 876...) MEDICAL DEVICES GASTROENTEROLOGY-UROLOGY DEVICES Surgical Devices § 876.4590 Interlocking urethral sound. (a) Identification. An interlocking urethral sound is a device that consists of two metal...

  16. 21 CFR 876.4590 - Interlocking urethral sound.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Interlocking urethral sound. 876.4590 Section 876...) MEDICAL DEVICES GASTROENTEROLOGY-UROLOGY DEVICES Surgical Devices § 876.4590 Interlocking urethral sound. (a) Identification. An interlocking urethral sound is a device that consists of two metal...

  17. 21 CFR 876.4590 - Interlocking urethral sound.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Interlocking urethral sound. 876.4590 Section 876...) MEDICAL DEVICES GASTROENTEROLOGY-UROLOGY DEVICES Surgical Devices § 876.4590 Interlocking urethral sound. (a) Identification. An interlocking urethral sound is a device that consists of two metal...

  18. 21 CFR 876.4590 - Interlocking urethral sound.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Interlocking urethral sound. 876.4590 Section 876...) MEDICAL DEVICES GASTROENTEROLOGY-UROLOGY DEVICES Surgical Devices § 876.4590 Interlocking urethral sound. (a) Identification. An interlocking urethral sound is a device that consists of two metal...

  19. National Synchrotron Light Source medical personnel protection interlock

    SciTech Connect

    Buda, S.; Gmuer, N.F.; Larson, R.; Thomlinson, W.

    1998-11-01

    This report is founded on reports written in April 1987 by Robert Hettel for angiography operations at the Stanford Synchrotron Research Laboratory (SSRL) and a subsequent report covering angiography operations at the National Synchrotron Light Source (NSLS); BNL Informal Report 47681, June 1992. The latter report has now been rewritten in order to accurately reflect the design and installation of a new medical safety system at the NSLS X17B2 beamline Synchrotron Medical Research Facility (SMERF). Known originally as the Angiography Personnel Protection Interlock (APPI), this system has been modified to incorporate other medical imaging research programs on the same beamline and thus the name has been changed to the more generic Medical Personnel Protection Interlock (MPPI). This report will deal almost exclusively with the human imaging (angiography, bronchography, mammography) aspects of the safety system, but will briefly explain the modular aspects of the system allowing other medical experiments to be incorporated. This MPPI report is organized such that the level of detail changes from a general overview to detailed engineering drawings of the hardware system. The general overview is presented in Section 1.0, MPPI Operational Mode and Procedures. The various MPPI components are described in detail in Section 2.0. Section 3.0 presents some simplified logic diagrams and accompanying text. This section was written to allow readers to become familiar with the logic system without having to work through the entire set of detailed engineering drawings listed in the Appendix. Detailed logic specifications are given in Section 4.0. The Appendix also contains copies of the current MPPI interlock test procedures for Setup and Patient Modes.

  20. National Synchrotron Light Source angiography personnel protection interlock

    SciTech Connect

    Gmuer, N.; Larson, R.; Thomlinson, W.

    1992-06-01

    This document has been written to describe the safety system operation at the NSLS X17B2 beamline Synchrotron Medical Research Facility (SMERF). The angiography exposure process involves scanning a patient up and down through dual fixed-position x-ray beams; exposure is controlled by opening and closing a fast-acting Safety Shutter mechanism at precise times in relation to the up and down motion of the scan chair. The fast-acting Safety Shutter mechanism is the primary radiation-stopping element protecting the patient while the chair is at rest and while it is reversing directions during the scan. Its fail-safe and fast operation is essential for the safety of the patient. Operation of X17B2 as a human subject angiography station necessitates the implementation of a personnel protection interlock system that, in conjunction with the Safety Shutters: permits safe access to the patient exposure area while the synchrotron radiation beam is illuminating the upstream dual energy monochromator; allows a patient to be imaged by the monochromatized beam under the supervision of a Responsible Physician, with scan chair motion and precision shutter actuation regulated by an angiography control computer, while providing a suitable number of safeguards against accidental radiation exposure; has different modes of operation to accommodate equipment set-up, test, and calibration; and patient exposure; and ensures the quick extinction of the beam if a potentially unsafe condition is detected. The interlock system which performs these safety functions is called the Angiography Personnel Protection Interlock (APPI). The APPI Document is organized such that the level of detail changes from a general overview to detailed engineering drawings of the hardware system.

  1. Thermal static bending of deployable interlocked booms

    NASA Technical Reports Server (NTRS)

    Staugaitis, C. L.; Predmore, R. E.

    1973-01-01

    Metal ribbons processed with a heat-forming treatment are enabled to form tubelike structures when deployed from a roll. Deployable booms of this have been utilized for gravity-gradient stabilization on the RAE, ATS, and Nimbus D satellites. An experimental thermal-mechanics test apparatus was developed to measure the thermal static bending and twist of booms up to 3 meters long. The apparatus was calibrated by using the correlation between calculated and observed thermal bending of a seamless tube. Thermal static bending values of 16 interlocked deployable booms were observed to be within a factor of 2.5 of the values calculated from seamless-tube theory. Out-of-Sun-plane thermal bending was caused by complex heat transfer across the interlocked seam. Significant thermal static twisting was not observed.

  2. Next Generation Fast RF Interlock Module and ATCA Adapter for ILC High Availability RF Test Station Demonstration

    SciTech Connect

    Larsen, R

    2009-10-17

    High availability interlocks and controls are required for the ILC (International Linear Collider) L-Band high power RF stations. A new F3 (Fast Fault Finder) VME module has been developed to process both fast and slow interlocks using FPGA logic to detect the interlock trip excursions. This combination eliminates the need for separate PLC (Programmable Logic Controller) control of slow interlocks. Modules are chained together to accommodate as many inputs as needed. In the next phase of development the F3's will be ported to the new industry standard ATCA (Advanced Telecom Computing Architecture) crate (shelf) via a specially designed VME adapter module with IPMI (Intelligent Platform Management Interface). The goal is to demonstrate auto-failover and hot-swap for future partially redundant systems.

  3. Final design review report for the RMCS Flammable Gas Detection Interlock

    SciTech Connect

    Corbett, J.E., Westinghouse Hanford

    1996-08-20

    This report document the completion of the formal design review for the RMCS (Rotary Mode Core Sampling) flammable gas detector interlock. This hydrogen/flammable gas interlock, a proposed addition to the RMCS system portable exhauster, in intended to support core sampling operations in waste tanks requiring flammable gas controls. The objective of this review was to approve new drawings at the 100% design completion state. The conclusion reached by the review committee was that the design was acceptable and efforts should continue toward fabrication and delivery.

  4. Implement proper furnace safety interlocks

    SciTech Connect

    Thomas, C.D.; Schoenmaker, G.J.W.

    1996-07-01

    Cracking furnaces are among some of the most complex operations in chemical process industries (CPI) plants. Consider, for example, the cracking furnaces in ethylene plants. Furnace explosions can occur during the light-off process or from accumulations of unburned fuel, incomplete combustion, or introduction of flammable products into the combustion spaces of the furnace. Over half of all furnace explosions occur during the initial light-off process for the furnace. The deficiencies that cause these events can be grouped into three broad categories: (1) human error; (2) incorrect or incomplete safety controls and equipment arrangement; and (3) equipment malfunction. This article presents a safety system that helps address all three of these categories for light-off events. No system is totally foolproof, but the use of a safety system, along with strict operating discipline, will reduce the number of furnace events encountered over the lifetime of the equipment. (Note that the controls typically referred to as ``combustion control,`` which include process temperature control, fuel-gas control, oxygen trim/draft control, and the like, are not part of the control described here.) Note also that although this system was developed for cracking furnaces in ethylene plants, it is equally applicable to other types of radiant-wall multiple-burner furnaces. It can be used for both new installations and retrofit situations. This safety system is not applicable to boilers or other devices with only one or two burners.

  5. Patterns In Contingencies: The Interlocking of Formal and Informal Political Institutions in Contemporary Argentina

    ERIC Educational Resources Information Center

    Llamazares, Ivan

    2005-01-01

    This article explores how the interlocking of formal and informal political institutions has affected the dynamics and performance of the Argentine democracy. Key institutional features of the Argentine political system have been a competitive form of federalism, loosely structured and political parties that are not ideologically unified,…

  6. Engineering Task Plan for Hepa Filter Differential Pressure (DP) Fan Interlock Upgrades

    SciTech Connect

    SIMONS, S.R.

    2000-05-19

    This document provides a plan for installation of Differential Pressure (DP) fan interlocks on the primary ventilation systems in selected Tank Farm facilities. This plan contains the engineering tasks required for installation and is summarized by the Acceptance for Beneficial Use list. Individuals responsible for each task are identified and scheduled accordingly.

  7. 21. Historic view looking northeast from tracks of Shell Interlocking ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    21. Historic view looking northeast from tracks of Shell Interlocking Tower after construction, 1909. Photographic copy of photograph published in Railway Age Gazette, February 4, 1910. - New York, New Haven, & Hartford Railroad, Shell Interlocking Tower, New Haven Milepost 16, approximately 100 feel east of New Rochelle Junction, New Rochelle, Westchester County, NY

  8. 4. North elevation of Shell Interlocking Tower showing structure built ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    4. North elevation of Shell Interlocking Tower showing structure built into slope of railroad right-of-way. - New York, New Haven, & Hartford Railroad, Shell Interlocking Tower, New Haven Milepost 16, approximately 100 feel east of New Rochelle Junction, New Rochelle, Westchester County, NY

  9. 21 CFR 876.4590 - Interlocking urethral sound.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Interlocking urethral sound. 876.4590 Section 876.4590 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES GASTROENTEROLOGY-UROLOGY DEVICES Surgical Devices § 876.4590 Interlocking urethral...

  10. Experimental Investigation About Stamping Behaviour of 3D Warp Interlock Composite Preforms

    NASA Astrophysics Data System (ADS)

    Dufour, Clément; Wang, Peng; Boussu, François; Soulat, Damien

    2014-10-01

    Forming of continuous fibre reinforcements and thermoplastic resin commingled prepregs can be performed at room temperature due to its similar textile structure. The "cool" forming stage is better controlled and more economical. The increase of temperature and the resin consolidation phases after the forming can be carried out under the isothermal condition thanks to a closed system. It can avoid the manufacturing defects easily experienced in the non-isothermal thermoforming, in particular the wrinkling [1]. Glass/Polypropylene commingled yarns have been woven inside different three-dimensional (3D) warp interlock fabrics and then formed using a double-curved shape stamping tool. The present study investigates the in-plane and through-thickness behaviour of the 3D warp interlock fibrous reinforcements during forming with a hemispherical punch. Experimental data allow analysing the forming behaviour in the warp and weft directions and on the influence of warp interlock architectures. The results point out that the layer to layer warp interlock preform has a better stamping behaviour, in particular no forming defects and good homogeneity in thickness.

  11. Long-range movement of large mechanically interlocked DNA nanostructures

    NASA Astrophysics Data System (ADS)

    List, Jonathan; Falgenhauer, Elisabeth; Kopperger, Enzo; Pardatscher, Günther; Simmel, Friedrich C.

    2016-08-01

    Interlocked molecules such as catenanes and rotaxanes, connected only via mechanical bonds have the ability to perform large-scale sliding and rotational movements, making them attractive components for the construction of artificial molecular machines and motors. We here demonstrate the realization of large, rigid rotaxane structures composed of DNA origami subunits. The structures can be easily modified to carry a molecular cargo or nanoparticles. By using multiple axle modules, rotaxane constructs are realized with axle lengths of up to 355 nm and a fuel/anti-fuel mechanism is employed to switch the rotaxanes between a mobile and a fixed state. We also create extended pseudo-rotaxanes, in which origami rings can slide along supramolecular DNA filaments over several hundreds of nanometres. The rings can be actively moved and tracked using atomic force microscopy.

  12. Long-range movement of large mechanically interlocked DNA nanostructures

    PubMed Central

    List, Jonathan; Falgenhauer, Elisabeth; Kopperger, Enzo; Pardatscher, Günther; Simmel, Friedrich C.

    2016-01-01

    Interlocked molecules such as catenanes and rotaxanes, connected only via mechanical bonds have the ability to perform large-scale sliding and rotational movements, making them attractive components for the construction of artificial molecular machines and motors. We here demonstrate the realization of large, rigid rotaxane structures composed of DNA origami subunits. The structures can be easily modified to carry a molecular cargo or nanoparticles. By using multiple axle modules, rotaxane constructs are realized with axle lengths of up to 355 nm and a fuel/anti-fuel mechanism is employed to switch the rotaxanes between a mobile and a fixed state. We also create extended pseudo-rotaxanes, in which origami rings can slide along supramolecular DNA filaments over several hundreds of nanometres. The rings can be actively moved and tracked using atomic force microscopy. PMID:27492061

  13. DETAIL OF STANDARD INTERLOCKING MACHINE OPERATING LEVERS. LOCKING MECHANISM IS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    DETAIL OF STANDARD INTERLOCKING MACHINE OPERATING LEVERS. LOCKING MECHANISM IS BELOW FLOOR. BOXES BEHIND SOME LEVERS HOUSE ELECTRICAL CONTACTS FOR SIGNALS. - Baltimore & Ohio Railroad, Z Tower, State Route 46, Keyser, Mineral County, WV

  14. INTERIOR VIEW OF WEST BANK RAILROAD CONTROL TOWER SHOWING INTERLOCKING ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    INTERIOR VIEW OF WEST BANK RAILROAD CONTROL TOWER SHOWING INTERLOCKING SWITCHING LEVER CONTROL PANEL. - Huey P. Long Bridge, Spanning Mississippi River approximately midway between nine & twelve mile points upstream from & west of New Orleans, Jefferson, Jefferson Parish, LA

  15. Refining the maintenance techniques for Interlocking Concrete Paver GIs - abstract

    EPA Science Inventory

    Surface clogging adversely affects the performance of Interlocking Concrete Pavements (ICP) by reducing their ability to infiltrate stormwater runoff. Determining the correct methods for remedial maintenances is crucial to recovering and maintaining efficient ICP performance. T...

  16. Refining the maintenance techniques for Interlocking Concrete Paver GIs

    EPA Science Inventory

    Surface clogging adversely affects the performance of Interlocking Concrete Pavements (ICP) by reducing their ability to infiltrate stormwater runoff. The clogging rate is a function of pavement type, traffic loading, surrounding physical environment and maintenance treatments. ...

  17. 38. Saga Interlocking Tower. Greens Farms, Fairfield Co., CT. Sec. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    38. Saga Interlocking Tower. Greens Farms, Fairfield Co., CT. Sec. 9108, MP 47.00. - Northeast Railroad Corridor, Amtrak Route between New York/Connecticut & Connecticut/Rhode Island State Lines, New Haven, New Haven County, CT

  18. 91. Old Saybrook Mechanical Interlocking Tower. Old Saybrook, Middlesex Co., ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    91. Old Saybrook Mechanical Interlocking Tower. Old Saybrook, Middlesex Co., CT. Sec. 4209, MP 105.00. - Northeast Railroad Corridor, Amtrak Route between New York/Connecticut & Connecticut/Rhode Island State Lines, New Haven, New Haven County, CT

  19. 92. Old Saybrook Mechanical Interlocking Tower. Old Saybrook, Middlesex Co., ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    92. Old Saybrook Mechanical Interlocking Tower. Old Saybrook, Middlesex Co., CT. Sec. 4209, MP 105.00. - Northeast Railroad Corridor, Amtrak Route between New York/Connecticut & Connecticut/Rhode Island State Lines, New Haven, New Haven County, CT

  20. 93. Old Saybrook Mechanical Interlocking Tower. Old Saybrook, Middlesex Co., ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    93. Old Saybrook Mechanical Interlocking Tower. Old Saybrook, Middlesex Co., CT. Sec. 4209, MP 105.00. - Northeast Railroad Corridor, Amtrak Route between New York/Connecticut & Connecticut/Rhode Island State Lines, New Haven, New Haven County, CT

  1. 94. Old Saybrook Mechanical Interlocking Tower. Old Saybrook, Middlesex Co., ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    94. Old Saybrook Mechanical Interlocking Tower. Old Saybrook, Middlesex Co., CT. Sec. 4209, MP 105.00. - Northeast Railroad Corridor, Amtrak Route between New York/Connecticut & Connecticut/Rhode Island State Lines, New Haven, New Haven County, CT

  2. 37. Saga Interlocking Tower. Greens Farms, Fairfield Co., CT. Sec. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    37. Saga Interlocking Tower. Greens Farms, Fairfield Co., CT. Sec. 9108, MP 47.00. - Northeast Railroad Corridor, Amtrak Route between New York/Connecticut & Connecticut/Rhode Island State Lines, New Haven, New Haven County, CT

  3. 34. Boston switch interlocking tower. Central Falls, Providence Co., RI. ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    34. Boston switch interlocking tower. Central Falls, Providence Co., RI. Sec. 4116, mp 190.40. - Northeast Railroad Corridor, Amtrak route between CT & MA state lines, Providence, Providence County, RI

  4. 13. INTERIOR, OPERATOR'S HOUSE, ELECTROMECHANICAL INTERLOCKING MACHINE New York, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    13. INTERIOR, OPERATOR'S HOUSE, ELECTRO-MECHANICAL INTERLOCKING MACHINE - New York, New Haven & Hartford Railroad, Mystic River Bridge, Spanning Mystic River between Groton & Stonington, Groton, New London County, CT

  5. 95. Old Saybrook Mechanical Interlocking Tower. Old Saybrook, Middlesex Co., ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    95. Old Saybrook Mechanical Interlocking Tower. Old Saybrook, Middlesex Co., CT. Sec. 4209, MP 105.00. - Northeast Railroad Corridor, Amtrak Route between New York/Connecticut & Connecticut/Rhode Island State Lines, New Haven, New Haven County, CT

  6. Edgewood Interlocking Tower. Edgewood, Hareford Co., MD. Sec. 1201, MP ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Edgewood Interlocking Tower. Edgewood, Hareford Co., MD. Sec. 1201, MP 75.50. - Northeast Railroad Corridor, Amtrak route between District of Columbia/Maryland state line & Maryland/Delaware state line, Baltimore, Independent City, MD

  7. B & P Junction Substation & Interlocking Tower. Baltimore, Baltimore ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    B & P Junction Substation & Interlocking Tower. Baltimore, Baltimore City, MD. Sec. 1201, MP 95.85. - Northeast Railroad Corridor, Amtrak route between District of Columbia/Maryland state line & Maryland/Delaware state line, Baltimore, Independent City, MD

  8. Union Junction Interlocking Tower. Baltimore, Baltimore City, MD. Sec. 1201, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    Union Junction Interlocking Tower. Baltimore, Baltimore City, MD. Sec. 1201, MP 95.49. - Northeast Railroad Corridor, Amtrak route between District of Columbia/Maryland state line & Maryland/Delaware state line, Baltimore, Independent City, MD

  9. BOWIE INTERLOCKING TOWER AND PASSENGER STATION. BOWIE, PRINCE GEORGES CO., ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    BOWIE INTERLOCKING TOWER AND PASSENGER STATION. BOWIE, PRINCE GEORGES CO., MD. Sec. 1201, MP 120.50. - Northeast Railroad Corridor, Amtrak route between District of Columbia/Maryland state line & Maryland/Delaware state line, Baltimore, Independent City, MD

  10. A Focus on Triazolium as a Multipurpose Molecular Station for pH-Sensitive Interlocked Crown-Ether-Based Molecular Machines

    PubMed Central

    Coutrot, Frédéric

    2015-01-01

    The control of motion of one element with respect to others in an interlocked architecture allows for different co-conformational states of a molecule. This can result in variations of physical or chemical properties. The increase of knowledge in the field of molecular interactions led to the design, the synthesis, and the study of various systems of molecular machinery in a wide range of interlocked architectures. In this field, the discovery of new molecular stations for macrocycles is an attractive way to conceive original molecular machines. In the very recent past, the triazolium moiety proved to interact with crown ethers in interlocked molecules, so that it could be used as an ideal molecular station. It also served as a molecular barrier in order to lock interlaced structures or to compartmentalize interlocked molecular machines. This review describes the recently reported examples of pH-sensitive triazolium-containing molecular machines and their peculiar features. PMID:26491633

  11. A Focus on Triazolium as a Multipurpose Molecular Station for pH-Sensitive Interlocked Crown-Ether-Based Molecular Machines.

    PubMed

    Coutrot, Frédéric

    2015-10-01

    The control of motion of one element with respect to others in an interlocked architecture allows for different co-conformational states of a molecule. This can result in variations of physical or chemical properties. The increase of knowledge in the field of molecular interactions led to the design, the synthesis, and the study of various systems of molecular machinery in a wide range of interlocked architectures. In this field, the discovery of new molecular stations for macrocycles is an attractive way to conceive original molecular machines. In the very recent past, the triazolium moiety proved to interact with crown ethers in interlocked molecules, so that it could be used as an ideal molecular station. It also served as a molecular barrier in order to lock interlaced structures or to compartmentalize interlocked molecular machines. This review describes the recently reported examples of pH-sensitive triazolium-containing molecular machines and their peculiar features.

  12. A Focus on Triazolium as a Multipurpose Molecular Station for pH-Sensitive Interlocked Crown-Ether-Based Molecular Machines.

    PubMed

    Coutrot, Frédéric

    2015-10-01

    The control of motion of one element with respect to others in an interlocked architecture allows for different co-conformational states of a molecule. This can result in variations of physical or chemical properties. The increase of knowledge in the field of molecular interactions led to the design, the synthesis, and the study of various systems of molecular machinery in a wide range of interlocked architectures. In this field, the discovery of new molecular stations for macrocycles is an attractive way to conceive original molecular machines. In the very recent past, the triazolium moiety proved to interact with crown ethers in interlocked molecules, so that it could be used as an ideal molecular station. It also served as a molecular barrier in order to lock interlaced structures or to compartmentalize interlocked molecular machines. This review describes the recently reported examples of pH-sensitive triazolium-containing molecular machines and their peculiar features. PMID:26491633

  13. Design and manufacturing of interlocked composite grids

    NASA Astrophysics Data System (ADS)

    Han, Dongyup

    Composite grid structures made from pultruded unidirectional glass or carbon ribs provide unmatched performance/cost combination of any composite panels. A new manufacturing method for an ortho-grid using slotted joint and adhesive bonding ("Interlocked Composite Grid" or ICG) has been developed. The high structural performance of the grid is derived from uni-plies and the efficient load transfer mechanism. Pultrusion is one of the cheapest, fastest and reliable manufacturing processes for composite sections. Pultruded ribs, along with the simple assembly concept, lead to the low cost structure. Also, the flexibility in assembly eliminates the size limitation and large civil composite structures can be built. Two different equivalent stiffness models, the equivalent plate stiffness matrices and the equivalent engineering constants, have been formulated. The former model, more accurate than the equivalent engineering constants, includes the effects of the slots, the internal ribs, and the skins. The latter is used for establishing simple design guidelines. The equivalent stiffness models have been verified with numerical analysis and experimental data. The simplicity and flexibility of the design of an ICG has been demonstrated by sample design problems. Also, an approximate cost estimation rule has been established. ICG beams and panels have been built and tested under static and dynamic flexural loading. Superior mechanical properties, such as high damage tolerance, resilience, and durability have been demonstrated. The failure mode has been identified.

  14. Extending DIII-D Neutral Beam Modulated Operations with a Camac Based Total on Time Interlock

    SciTech Connect

    Baggest, D.S.; Broesch, J.D.; Phillips, J.C.

    1999-11-01

    A new total-on-time interlock has increased the operational time limits of the Neutral Beam systems at DIII-D. The interlock, called the Neutral Beam On-Time-Limiter (NBOTL), is a custom built CAMAC module utilizing a Xilinx 9572 Complex Programmable Logic Device (CPLD) as its primary circuit. The Neutral Beam Injection Systems are the primary source of auxiliary heating for DIII-D plasma discharges and contain eight sources capable of delivering 20MW of power. The delivered power is typically limited to 3.5 s per source to protect beam-line components, while a DIII-D plasma discharge usually exceeds 5 s. Implemented as a hardware interlock within the neutral beam power supplies, the NBOTL limits the beam injection time. With a continuing emphasis on modulated beam injections, the NBOTL guards against command faults and allows the beam injection to be safely spread over a longer plasma discharge time. The NBOTL design is an example of incorporating modern circuit design techniques (CPLD) within an established format (CAMAC). The CPLD is the heart of the NBOTL and contains 90% of the circuitry, including a loadable, 1 MHz, 28 bit, BCD count down timer, buffers, and CAMAC communication circuitry. This paper discusses the circuit design and implementation. Of particular interest is the melding of flexible modern programmable logic devices with the CAMAC format.

  15. Modeling the Injury Prevention Impact of Mandatory Alcohol Ignition Interlock Installation in All New US Vehicles

    PubMed Central

    Flannagan, Carol A. C.; Bingham, C. Raymond; Cunningham, Rebecca M.; Rupp, Jonathan D.

    2015-01-01

    Objectives. We estimated the injury prevention impact and cost savings associated with alcohol interlock installation in all new US vehicles. Methods. We identified fatal and nonfatal injuries associated with drinking driver vehicle crashes from the Fatality Analysis Reporting System and National Automotive Sampling System’s General Estimates System data sets (2006–2010). We derived the estimated impact of universal interlock installation using an estimate of the proportion of alcohol-related crashes that were preventable in vehicles < 1 year-old. We repeated this analysis for each subsequent year, assuming a 15-year implementation. We applied existing crash-induced injury cost metrics to approximate economic savings, and we used a sensitivity analysis to examine results with varying device effectiveness. Results. Over 15 years, 85% of crash fatalities (> 59 000) and 84% to 88% of nonfatal injuries (> 1.25 million) attributed to drinking drivers would be prevented, saving an estimated $342 billion in injury-related costs, with the greatest injury and cost benefit realized among recently legal drinking drivers. Cost savings outweighed installation costs after 3 years, with the policy remaining cost effective provided device effectiveness remained above approximately 25%. Conclusions. Alcohol interlock installation in all new vehicles is likely a cost-effective primary prevention policy that will substantially reduce alcohol-involved crash fatalities and injuries, especially among young vulnerable drivers. PMID:25790385

  16. Composites reinforced via mechanical interlocking of surface-roughened microplatelets within ductile and brittle matrices.

    PubMed

    Libanori, R; Carnelli, D; Rothfuchs, N; Binelli, M R; Zanini, M; Nicoleau, L; Feichtenschlager, B; Albrecht, G; Studart, A R

    2016-06-01

    Load-bearing reinforcing elements in a continuous matrix allow for improved mechanical properties and can reduce the weight of structural composites. As the mechanical performance of composite systems are heavily affected by the interfacial properties, tailoring the interactions between matrices and reinforcing elements is a crucial problem. Recently, several studies using bio-inspired model systems suggested that interfacial mechanical interlocking is an efficient mechanism for energy dissipation in platelet-reinforced composites. While cheap and effective solutions are available at the macroscale, the modification of surface topography in micron-sized reinforcing elements still represents a challenging task. Here, we report a simple method to create nanoasperities with tailored sizes and densities on the surface of alumina platelets and investigate their micromechanical effect on the energy dissipation mechanisms of nacre-like materials. Composites reinforced with roughened platelets exhibit improved mechanical properties for both organic ductile epoxy and inorganic brittle cement matrices. Mechanical interlocking increases the modulus of toughness (area under the stress-strain curve) by 110% and 56% in epoxy and cement matrices, respectively, as compared to those reinforced with flat platelets. This interlocking mechanism can potentially lead to a significant reduction in the weight of mechanical components while retaining the structural performance required in the application field. PMID:27070938

  17. Active optical zoom system

    DOEpatents

    Wick, David V.

    2005-12-20

    An active optical zoom system changes the magnification (or effective focal length) of an optical imaging system by utilizing two or more active optics in a conventional optical system. The system can create relatively large changes in system magnification with very small changes in the focal lengths of individual active elements by leveraging the optical power of the conventional optical elements (e.g., passive lenses and mirrors) surrounding the active optics. The active optics serve primarily as variable focal-length lenses or mirrors, although adding other aberrations enables increased utility. The active optics can either be LC SLMs, used in a transmissive optical zoom system, or DMs, used in a reflective optical zoom system. By appropriately designing the optical system, the variable focal-length lenses or mirrors can provide the flexibility necessary to change the overall system focal length (i.e., effective focal length), and therefore magnification, that is normally accomplished with mechanical motion in conventional zoom lenses. The active optics can provide additional flexibility by allowing magnification to occur anywhere within the FOV of the system, not just on-axis as in a conventional system.

  18. Are Inflatable Nails an Alternative to Interlocked Nails in Tibial Fractures?

    PubMed Central

    Lundberg, Odd J.; Gjerdet, Nils R.; Mølster, Anders

    2008-01-01

    Recently developed inflatable nails avoid reaming and interlocking screws in tibial fractures and reflect a new principle for stabilization of long bone fractures. We asked if the bending stiffness, rotational rigidity, or play (looseness of rotation) differed between an inflatable versus large-diameter reamed interlocked nails, and whether the maximal torque to failure of the two bone-implant constructs differed. In a cadaveric model, we compared the biomechanical properties with those of an interlocked nail in eight pairs of fractured tibial bones. Bending stiffness, rotational rigidity, play (looseness in rotation), and torsional strength within 20° rotation were investigated using a biaxial servohydraulic testing system. For all biomechanical variables, we found a large interindividual variance between the pairs attributable to bone quality (osteoporosis) for both fixation methods. The inflatable nail had a higher bending stiffness, with a mean difference of 58 N/mm, and a lower torsional strength, with a mean difference of 13.5 Nm, compared with the locked nail. During torsional testing we noted slippage between the inflatable nail and bone. We observed no differences in play or rotational rigidity. Given the lower torsional strength we recommend caution with weightbearing until there are signs of fracture consolidation. PMID:18299950

  19. Recent Advances in the Synthesis and Functions of Reconfigurable Interlocked DNA Nanostructures.

    PubMed

    Lu, Chun-Hua; Cecconello, Alessandro; Willner, Itamar

    2016-04-27

    Interlocked circular DNA nanostructures, e.g., catenanes or rotaxanes, provide functional materials within the area of DNA nanotechnology. Specifically, the triggered reversible reconfiguration of the catenane or rotaxane structures provides a means to yield new DNA switches and to use them as dynamic scaffolds for controlling chemical functions and positioning functional cargoes. The synthesis of two-ring catenanes and their switchable reconfiguration by pH, metal ions, or fuel/anti-fuel stimuli are presented, and the functions of these systems, as pendulum or rotor devices or as switchable catalysts, are described. Also, the synthesis of three-, five-, and seven-ring catenanes is presented, and their switchable reconfiguration using fuel/anti-fuel strands is addressed. Implementation of the dynamically reconfigured catenane structures for the programmed organization of Au nanoparticle (NP) assemblies, which allows the plasmonic control of the fluorescence properties of Au NP/fluorophore loads associated with the scaffold, and for the operation of logic gates is discussed. Interlocked DNA rotaxanes and their different synthetic approaches are presented, and their switchable reconfiguration by means of fuel/anti-fuel strands or photonic stimuli is described. Specifically, the use of the rotaxane as a scaffold to organize Au NP assemblies, and the control of the fluorescence properties with Au NP/fluorophore hybrids loaded on the rotaxane scaffold, are introduced. The future prospectives and challenges in the field of interlocked DNA nanostructures and the possible applications are discussed. PMID:27019201

  20. The principle of topological interlocking in extraterrestrial construction

    NASA Astrophysics Data System (ADS)

    Dyskin, A. V.; Estrin, Y.; Pasternak, E.; Khor, H. C.; Kanel-Belov, A. J.

    2005-07-01

    Applications of a newly established principle of topological interlocking to different types of extraterrestrial construction are considered. Topological interlocking arises when elements of special shapes (usually convex or nearly convex, such that no stress concentration develops) are arranged in such a way that neither of them can be removed from the assembly without disturbing the neighbouring elements. Two types of extraterrestrial structures are considered. The first type represents mortar free structures built from specially engineered interlocking bricks, called osteomorphic bricks. The self-adjusting property of these bricks permits erecting structures which tolerate low precision of production and assembly, thus making the proposed method suitable for in situ produced bricks and low cost assembling machinery. The structures of the second type are modular extraterrestrial bases or space ships organised in topologically interlocking assemblies. For an extraterrestrial settlement such an organisation permits easy assembly even if the modules are uploaded on uneven ground. A space ship can be assembled from independent smaller ships interlocked topologically thus becoming a flexible vehicle suitable for both long-distance journeys and simultaneous exploration of extraterrestrial objects clustered in a relative proximity of each other.

  1. Organometallic rotaxane dendrimers with fourth-generation mechanically interlocked branches

    PubMed Central

    Wang, Wei; Chen, Li-Jun; Wang, Xu-Qing; Sun, Bin; Li, Xiaopeng; Zhang, Yanyan; Shi, Jiameng; Yu, Yihua; Zhang, Li; Liu, Minghua; Yang, Hai-Bo

    2015-01-01

    Mechanically interlocked molecules, such as catenanes, rotaxanes, and knots, have applications in information storage, switching devices, and chemical catalysis. Rotaxanes are dumbbell-shaped molecules that are threaded through a large ring, and the relative motion of the two components along each other can respond to external stimuli. Multiple rotaxane units can amplify responsiveness, and repetitively branched molecules—dendrimers—can serve as vehicles for assembly of many rotaxanes on single, monodisperse compounds. Here, we report the synthesis of higher-generation rotaxane dendrimers by a divergent approach. Linkages were introduced as spacer elements to reduce crowding and to facilitate rotaxane motion, even at the congested periphery of the compounds up to the fourth generation. The structures were characterized by 1D multinuclear (1H, 13C, and 31P) and 2D NMR spectroscopy, MALDI-TOF-MS, gel permeation chromatography (GPC), and microscopy-based methods including atomic force microscopy (AFM) and transmission electron microscopy (TEM). AFM and TEM studies of rotaxane dendrimers vs. model dendrimers show that the rotaxane units enhance the rigidity and reduce the tendency of these assemblies to collapse by self-folding. Surface functionalization of the dendrimers with ferrocenes as termini produced electrochemically active assemblies. The preparation of dendrimers with a well-defined topological structure, enhanced rigidity, and diverse functional groups opens previously unidentified avenues for the application of these materials in molecular electronics and materials science. PMID:25902491

  2. The impact of mandatory versus voluntary participation in the Alberta ignition interlock program.

    PubMed

    Beirness, D J; Marques, P R; Voas, R B; Tippetts, A S

    2003-01-01

    Research has demonstrated that participation in an interlock program significantly reduces the likelihood of subsequent driving while intoxicated (DWI) convictions at least so long as the interlock device is installed in the vehicle. Despite the growing number of jurisdictions that allow interlock programs and the demonstrated success of these programs, the proportion of DWI offenders who actually have the device installed is minimal. In an effort to increase the proportion of offenders using interlocks, some jurisdictions require offenders to install an interlock as a condition of license reinstatement whereas others merely offer offenders a reduction in the period of hard suspension if they voluntarily participate in an interlock program. The objective of the present study was to determine the extent to which voluntary interlock participants are more or less successful in terms of subsequent recidivism than those for whom interlock program participation has been mandated. The issue was addressed using data from the interlock program in Alberta, Canada, which provides for both mandatory and voluntary participation. The recidivism experience of voluntary and mandatory interlock participants was examined both during and after the period of interlock installation. Cox regression revealed that, after controlling for (or equating) the number of prior DWI offenses, the survival rates of DWI offenders who were ordered to participate in the interlock program did not differ from those of voluntary participants. These results suggest that further use of mandatory interlock programs should be just as successful as voluntary programs when offenders share characteristics with those studied in Alberta.

  3. Interlocking mats support drilling rig on frozen swamp

    SciTech Connect

    Not Available

    1991-04-15

    This paper discusses how a company employed a unique mat system to reduce environmental impact and to support the drilling rig on its Astosch No. 1 exploratory well at Granite Point in the Trading Bay Wildlife Refuge. The site is on the west side of Cook Inlet. During winter, the travel time from Anchorage to the base camp near the Tyonek Indian village was 5 hr by ice road or 45 min by fixed wing aircraft. Eighteen miles of existing gravel roads were used from this base camp to the edge of the frozen muskeg swamp, and from there, they constructed 7 miles of ice road to the well site. They constructed a snow and ice pad with two impermeable liners and then installed Uni-Mat International Inc.'s patented interlocking mats for the final foundation. After moving in the rig, a snow berm was built around the perimeter of the location and an impermeable liner was then draped and secured over the berm.

  4. Interlocked DNA nanostructures controlled by a reversible logic circuit.

    PubMed

    Li, Tao; Lohmann, Finn; Famulok, Michael

    2014-09-17

    DNA nanostructures constitute attractive devices for logic computing and nanomechanics. An emerging interest is to integrate these two fields and devise intelligent DNA nanorobots. Here we report a reversible logic circuit built on the programmable assembly of a double-stranded (ds) DNA [3]pseudocatenane that serves as a rigid scaffold to position two separate branched-out head-motifs, a bimolecular i-motif and a G-quadruplex. The G-quadruplex only forms when preceded by the assembly of the i-motif. The formation of the latter, in turn, requires acidic pH and unhindered mobility of the head-motif containing dsDNA nanorings with respect to the central ring to which they are interlocked, triggered by release oligodeoxynucleotides. We employ these features to convert the structural changes into Boolean operations with fluorescence labelling. The nanostructure behaves as a reversible logic circuit consisting of tandem YES and AND gates. Such reversible logic circuits integrated into functional nanodevices may guide future intelligent DNA nanorobots to manipulate cascade reactions in biological systems.

  5. Interlocked DNA nanostructures controlled by a reversible logic circuit

    PubMed Central

    Li, Tao; Lohmann, Finn; Famulok, Michael

    2014-01-01

    DNA nanostructures constitute attractive devices for logic computing and nanomechanics. An emerging interest is to integrate these two fields and devise intelligent DNA nanorobots. Here we report a reversible logic circuit built on the programmable assembly of a double-stranded (ds) DNA [3]pseudocatenane that serves as a rigid scaffold to position two separate branched-out head-motifs, a bimolecular i-motif and a G-quadruplex. The G-quadruplex only forms when preceded by the assembly of the i-motif. The formation of the latter, in turn, requires acidic pH and unhindered mobility of the head-motif containing dsDNA nanorings with respect to the central ring to which they are interlocked, triggered by release oligodeoxynucleotides. We employ these features to convert the structural changes into Boolean operations with fluorescence labelling. The nanostructure behaves as a reversible logic circuit consisting of tandem YES and AND gates. Such reversible logic circuits integrated into functional nanodevices may guide future intelligent DNA nanorobots to manipulate cascade reactions in biological systems. PMID:25229207

  6. Unusually high sound absorption in topological interlocking materials

    NASA Astrophysics Data System (ADS)

    Estrin, Yuri; Molotnikov, Andrey; Carlesso, Mateus

    2015-04-01

    Topological interlocking materials are a new class of architectured materials, which have a range of unusual mechanical and acoustic properties. We present a novel approach for combating noise pollution based on the concept of topological interlocking. Specifically, we propose to segment monolithic plates into an assembly of topologically interlocked building blocks and show experimentally that this leads to a spectacular increase of the sound absorption coefficient over that in the original material, as exemplified by ceramics. Measurements of the airflow resistance confirmed the primary role of segmentation in enhancing sound absorption capability of the material in the audible frequency range. The absorption coefficient was further boosted by design of the material itself. The new material design proposed poses some interesting challenges to theory of sound wave propagation in heterogeneous media.

  7. 1. ENVIRONMENT, FROM NORTHWEST, SHOWING B&P INTERLOCKING TOWER AND POWER ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    1. ENVIRONMENT, FROM NORTHWEST, SHOWING B&P INTERLOCKING TOWER AND POWER SUBSTATIONS - Baltimore & Potomac Interlocking Tower, Adjacent to AMTRAK railroad tracks in block bounded by Howard Street, Jones Falls Expressway, Maryland Avenue & Falls Road, Baltimore, Independent City, MD

  8. 49 CFR 236.340 - Electromechanical interlocking machine; locking between electrical and mechanical levers.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Electromechanical interlocking machine; locking... Electromechanical interlocking machine; locking between electrical and mechanical levers. In electro-mechanical interlocking machine, locking between electric and mechanical levers shall be maintained so that...

  9. 49 CFR 236.340 - Electromechanical interlocking machine; locking between electrical and mechanical levers.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 4 2012-10-01 2012-10-01 false Electromechanical interlocking machine; locking... Electromechanical interlocking machine; locking between electrical and mechanical levers. In electro-mechanical interlocking machine, locking between electric and mechanical levers shall be maintained so that...

  10. 49 CFR 236.340 - Electromechanical interlocking machine; locking between electrical and mechanical levers.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 4 2013-10-01 2013-10-01 false Electromechanical interlocking machine; locking... Electromechanical interlocking machine; locking between electrical and mechanical levers. In electro-mechanical interlocking machine, locking between electric and mechanical levers shall be maintained so that...

  11. 49 CFR 236.340 - Electromechanical interlocking machine; locking between electrical and mechanical levers.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 4 2014-10-01 2014-10-01 false Electromechanical interlocking machine; locking... Electromechanical interlocking machine; locking between electrical and mechanical levers. In electro-mechanical interlocking machine, locking between electric and mechanical levers shall be maintained so that...

  12. 49 CFR 236.340 - Electromechanical interlocking machine; locking between electrical and mechanical levers.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 4 2011-10-01 2011-10-01 false Electromechanical interlocking machine; locking... Electromechanical interlocking machine; locking between electrical and mechanical levers. In electro-mechanical interlocking machine, locking between electric and mechanical levers shall be maintained so that...

  13. 12 CFR 348.4 - Interlocking relationships permitted by statute.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... authorized on an emergency basis in accordance with section 13(k) of the Federal Deposit Insurance Act (12 U... 12 Banks and Banking 4 2011-01-01 2011-01-01 false Interlocking relationships permitted by statute... function; (b) A corporation operating under section 25 or section 25A of the Federal Reserve Act (12...

  14. 12 CFR 348.4 - Interlocking relationships permitted by statute.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... authorized on an emergency basis in accordance with section 13(k) of the Federal Deposit Insurance Act (12 U... 12 Banks and Banking 5 2014-01-01 2014-01-01 false Interlocking relationships permitted by statute... function; (b) A corporation operating under section 25 or section 25A of the Federal Reserve Act (12...

  15. 12 CFR 348.4 - Interlocking relationships permitted by statute.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... authorized on an emergency basis in accordance with section 13(k) of the Federal Deposit Insurance Act (12 U... 12 Banks and Banking 5 2013-01-01 2013-01-01 false Interlocking relationships permitted by statute... function; (b) A corporation operating under section 25 or section 25A of the Federal Reserve Act (12...

  16. 12 CFR 348.4 - Interlocking relationships permitted by statute.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... authorized on an emergency basis in accordance with section 13(k) of the Federal Deposit Insurance Act (12 U... 12 Banks and Banking 5 2012-01-01 2012-01-01 false Interlocking relationships permitted by statute... function; (b) A corporation operating under section 25 or section 25A of the Federal Reserve Act (12...

  17. Bio-inspired interfacial strengthening strategy through geometrically interlocking designs.

    PubMed

    Zhang, Yuming; Yao, Haimin; Ortiz, Christine; Xu, Jinquan; Dao, Ming

    2012-11-01

    Many biological materials, such as nacre and bone, are hybrid materials composed of stiff brittle ceramics and compliant organic materials. These natural organic/inorganic composites exhibit much enhanced strength and toughness in comparison to their constituents and inspires enormous biomimetic endeavors aiming to synthesize materials with superior mechanical properties. However, most current synthetic composites have not exhibited their full potential of property enhancement compared to the natural prototypes they are mimicking. One of the key issues is the weak junctions between stiff and compliant phases, which need to be optimized according to the intended functions of the composite material. Motivated by the geometrically interlocking designs of natural biomaterials, here we propose an interfacial strengthening strategy by introducing geometrical interlockers on the interfaces between compliant and stiff phases. Finite element analysis (FEA) shows that the strength of the composite depends strongly on the geometrical features of interlockers including shape, size, and structural hierarchy. Even for the most unfavorable scenario when neither adhesion nor friction is present between stiff and compliant phases, the tensile strength of the composites with proper interlocker design can reach up to 70% of the ideal value. The findings in this paper would provide guidelines to the improvement of the mechanical properties of current biomimetic composites. PMID:23032427

  18. Charging/Safety-Interlock Connection For Capacitor Bank

    NASA Technical Reports Server (NTRS)

    Rippel, Wally E.

    1990-01-01

    Electrically controlled mechanical interlock apparatus prevents connection of bank of capacitors to battery or other dc power supply until capacitors precharged to nearly full supply voltage. Precharge eliminates excessive inrush current, which damages capacitors, wires, or connectors. Circuit in apparatus also discharges capacitors after power turned off or capacitors disconnected from power supply.

  19. 12 CFR 563f.4 - Interlocking relationships permitted by statute.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... if a change in circumstances occurs with respect to one of the interlocked depository organizations... § 563f.3 do not apply in the case of any one or more of the following organizations or to a subsidiary thereof: (a) A depository organization that has been placed formally in liquidation, or which is in...

  20. 60. Fair Street Interlocking & circuit breaker gantry. New Haven, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    60. Fair Street Interlocking & circuit breaker gantry. New Haven, New Haven Co., CT. Sec. 9108, MP 71.90. - Northeast Railroad Corridor, Amtrak Route between New York/Connecticut & Connecticut/Rhode Island State Lines, New Haven, New Haven County, CT

  1. 59. Fair Street Interlocking & circuit breaker gantry. New Haven, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    59. Fair Street Interlocking & circuit breaker gantry. New Haven, New Haven Co., CT. Sec. 9108, MP 71.90. - Northeast Railroad Corridor, Amtrak Route between New York/Connecticut & Connecticut/Rhode Island State Lines, New Haven, New Haven County, CT

  2. 58. Fair Street Interlocking & circuit breaker gantry. New Haven, ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    58. Fair Street Interlocking & circuit breaker gantry. New Haven, New Haven Co., CT. Sec. 9108, MP 71.90. - Northeast Railroad Corridor, Amtrak Route between New York/Connecticut & Connecticut/Rhode Island State Lines, New Haven, New Haven County, CT

  3. How Does Learning Intent Affect Interlocking Directorates Dynamic?

    ERIC Educational Resources Information Center

    Simoni, Michele; Caiazza, Rosa

    2012-01-01

    Purpose: Literature on board interlocks agrees that these inter-organizational ties are effective channels to exchange information and share knowledge. However, studies that consider the nature and the amount of knowledge that firms exchange are still relatively absent. Filling this gap, this paper aims to identify four types of mechanisms that…

  4. B & P Junction Substation & Interlocking Tower; Howard Street ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    B & P Junction Substation & Interlocking Tower; Howard Street Bridge. Baltimore, Baltimore City, MD. Sec. 1201, MP 95.85 - Northeast Railroad Corridor, Amtrak route between District of Columbia/Maryland state line & Maryland/Delaware state line, Baltimore, Independent City, MD

  5. View northwest of model board; telephone communications with interlock towers ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    View northwest of model board; telephone communications with interlock towers and substations was maintained using the switchboard at the photograph's lower left of center; switchboard console #1 for controlling indicating lights is at lower left of the photograph - Thirtieth Street Station, Power Director Center, Thirtieth & Market Streets in Amtrak Railroad Station, Philadelphia, Philadelphia County, PA

  6. Communication Systems. Laboratory Activities.

    ERIC Educational Resources Information Center

    Sutherland, Barbara, Ed.

    This communication systems guide provides teachers with learning activities for secondary students. Introductory materials include an instructional planning outline and worksheet, an outline of essential elements, a list of objectives, a course description, and a content outline. The guide contains 32 modules on the following topics: story…

  7. Production Systems. Laboratory Activities.

    ERIC Educational Resources Information Center

    Gallaway, Ann, Ed.

    This production systems guide provides teachers with learning activities for secondary students. Introductory materials include an instructional planning outline and worksheet, an outline of essential elements, domains and objectives, a course description, and a content outline. The guide contains 30 modules on the following topics: production…

  8. ADASY (Active Daylighting System)

    NASA Astrophysics Data System (ADS)

    Vázquez-Moliní, Daniel; González-Montes, Mario; Fernández-Balbuena, Antonio Á.; Bernabéu, Eusebio; García-Botella, Ángel; García-Rodríguez, Lucas; Pohl, Wilfried

    2009-08-01

    The main objective of ADASY (Active Daylighting System) work is to design a façade static daylighting system oriented to office applications, mainly. The goal of the project is to save energy by guiding daylight into a building for lighting purpose. With this approach we can reduce the electrical load for artificial lighting, completing it with sustainable energy. The collector of the system is integrated on a vertical façade and its distribution guide is always horizontal inside of the false ceiling. ADASY is designed with a specific patent pending caption system, a modular light-guide and light extractor luminaire system. Special care has been put on the final cost of the system and its building integration purpose. The current ADASY configuration is able to illuminate 40 m2 area with a 300lx-400lx level in the mid time work hours; furthermore it has a good enough spatial uniformity distribution and a controlled glare. The data presented in this study are the result of simulation models and have been confirmed by a physical scaled prototype. ADASY's main advantages over regular illumination systems are: -Low maintenance; it has not mobile pieces and therefore it lasts for a long time and require little attention once installed. - No energy consumption; solar light continue working even if there has been a power outage. - High quality of light: the colour rendering of light is very high - Psychological benefits: People working with daylight get less stress and more comfort, increasing productivity. - Health benefits

  9. Daisy Chain Rotaxanes Made from Interlocked DNA Nanostructures.

    PubMed

    Weigandt, Johannes; Chung, Chia-Ling; Jester, Stefan-S; Famulok, Michael

    2016-04-25

    We report the stepwise assembly of supramolecular daisy chain rotaxanes (DCR) made of double-stranded DNA: Small dsDNA macrocycles bearing an axle assemble into a pseudo-DCR precursor that was connected to rigid DNA stoppers to form DCR with the macrocycles hybridized to the axles. In presence of release oligodeoxynucleotides (rODNs), the macrocycles are released from their respective hybridization sites on the axles, leading to stable mechanically interlocked DCRs. Besides the expected threaded DCRs, certain amounts of externally hybridized structures were observed, which dissociate into dumbbell structures in presence of rODNs. We show that the genuine DCRs have significantly higher degrees of freedom in their movement along the thread axle than the hybridized DCR precursors. Interlocking of DNA in DCRs might serve as a versatile principle for constructing functional DNA nanostructures where the movement of the subunits is restricted within precisely confined tolerance ranges.

  10. Daisy Chain Rotaxanes Made from Interlocked DNA Nanostructures

    PubMed Central

    Weigandt, Johannes; Chung, Chia‐Ling; Jester, Stefan‐S.

    2016-01-01

    Abstract We report the stepwise assembly of supramolecular daisy chain rotaxanes (DCR) made of double‐stranded DNA: Small dsDNA macrocycles bearing an axle assemble into a pseudo‐DCR precursor that was connected to rigid DNA stoppers to form DCR with the macrocycles hybridized to the axles. In presence of release oligodeoxynucleotides (rODNs), the macrocycles are released from their respective hybridization sites on the axles, leading to stable mechanically interlocked DCRs. Besides the expected threaded DCRs, certain amounts of externally hybridized structures were observed, which dissociate into dumbbell structures in presence of rODNs. We show that the genuine DCRs have significantly higher degrees of freedom in their movement along the thread axle than the hybridized DCR precursors. Interlocking of DNA in DCRs might serve as a versatile principle for constructing functional DNA nanostructures where the movement of the subunits is restricted within precisely confined tolerance ranges. PMID:27010370

  11. Daisy Chain Rotaxanes Made from Interlocked DNA Nanostructures.

    PubMed

    Weigandt, Johannes; Chung, Chia-Ling; Jester, Stefan-S; Famulok, Michael

    2016-04-25

    We report the stepwise assembly of supramolecular daisy chain rotaxanes (DCR) made of double-stranded DNA: Small dsDNA macrocycles bearing an axle assemble into a pseudo-DCR precursor that was connected to rigid DNA stoppers to form DCR with the macrocycles hybridized to the axles. In presence of release oligodeoxynucleotides (rODNs), the macrocycles are released from their respective hybridization sites on the axles, leading to stable mechanically interlocked DCRs. Besides the expected threaded DCRs, certain amounts of externally hybridized structures were observed, which dissociate into dumbbell structures in presence of rODNs. We show that the genuine DCRs have significantly higher degrees of freedom in their movement along the thread axle than the hybridized DCR precursors. Interlocking of DNA in DCRs might serve as a versatile principle for constructing functional DNA nanostructures where the movement of the subunits is restricted within precisely confined tolerance ranges. PMID:27010370

  12. 116. Photocopied August 1978. NEW INTERLOCKING STEEL SHEET PILING AT ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    116. Photocopied August 1978. NEW INTERLOCKING STEEL SHEET PILING AT PENSTOCK 52 IN THE FALL OF 1926. THE PILES FOR SUPPORTING THE HORIZONTAL ELEMENTS OF THE NEW FOREBAY APRON ARE IN PLACE BETWEEN THE NEW SHEET PILING AND THE FOREBAY WALL. VISIBLE BEYOND THE NEW SHEET PILING IS THE TIMBER SHEET PILING DRIVEN IN 1903 BY VON SCHON TO PREVENT WASHOUTS. (1006) - Michigan Lake Superior Power Company, Portage Street, Sault Ste. Marie, Chippewa County, MI

  13. Variable stiffness sandwich panels using electrostatic interlocking core

    NASA Astrophysics Data System (ADS)

    Heath, Callum J. C.; Bond, Ian P.; Potter, Kevin D.

    2016-04-01

    Structural topology has a large impact on the flexural stiffness of a beam structure. Reversible attachment between discrete substructures allows for control of shear stress transfer between structural elements, thus stiffness modulation. Electrostatic adhesion has shown promise for providing a reversible latching mechanism for controllable internal connectivity. Building on previous research, a thin film copper polyimide laminate has been used to incorporate high voltage electrodes to Fibre Reinforced Polymer (FRP) sandwich structures. The level of electrostatic holding force across the electrode interface is key to the achievable level of stiffness modulation. The use of non-flat interlocking core structures can allow for a significant increase in electrode contact area for a given core geometry, thus a greater electrostatic holding force. Interlocking core geometries based on cosine waves can be Computer Numerical Control (CNC) machined from Rohacell IGF 110 Foam core. These Interlocking Core structures could allow for enhanced variable stiffness functionality compared to basic planar electrodes. This novel concept could open up potential new applications for electrostatically induced variable stiffness structures.

  14. Interlocking circumareolar suture with undyed polyamide thread: a personal experience.

    PubMed

    Salgarello, Marzia; Visconti, Giuseppe; Barone-Adesi, Liliana

    2013-10-01

    In plastic breast surgery, the interlocking areolar suture has gained wide popularity since its introduction in 2007 by Hammond and colleagues. The interlocking circumareolar suture plays its role in the setting of circumareolar excisions to achieve a durable areola shaping and to prevent scar widening/hypertrophy and areola spreading/distortion. This study retrospectively reviewed 49 breasts that underwent interlocking suture after July 2011 for both aesthetic and reconstructive indications. For the suturing, 3-0 undyed polyamide thread with a straight cutting needle (Dafilon; B. Braun Melsungen AG, Melsungen, Germany) was used. This suture material was preferred to Gore-Tex reported by Hammond and colleagues because it is undyed without any microporous configuration, more wieldy, and less expensive. All 49 breasts showed good results in terms of areola shaping and diameter control as well as good scar quality during a mean follow-up period of 12 months (range 2-18 months) (Fig. 2). No infection, suture extrusion, skin fistula, or granuloma were experienced. The suture was not visible at all, and the patients did not report its palpability. However, at careful examination, the thread resulted slightly palpable.

  15. Fracture Union in Closed Interlocking Nail in Humeral Shaft Fractures

    PubMed Central

    Sahu, Ramji Lal; Ranjan, Rajni; Lal, Ajay

    2015-01-01

    Background: Fracture shaft humerus is a major cause of morbidity in patients with upper extremity injuries. The aim of this study was to evaluate the outcome of interlocking nail in humeral shaft fractures. Methods: This study was conducted in the Department of Orthopedic Surgery in SMS and R Sharda University from January 2010 to November 2013. Seventy-eight patients were recruited from emergency and out-patient department having a close fracture of humerus shaft. All patients were operated under general anesthesia and closed reamed interlocking nailing was done. All patients were followed for 9 months. Results: Out of 78 patients, 69 patients underwent union in 90–150 days with a mean of 110.68 days. Complications found in four patients who had nonunion, and five patients had delayed union, which was treated with bone grafting. All the patients were assessed clinically and radiologically for fracture healing, joint movements and implant failure. The results were excellent in 88.46% and good in 6.41% patients. Complete subjective, functional, and clinical recovery had occurred in almost 100% of the patients. Conclusions: The results of the present study indicates that in the presence of proper indications, reamed antegrade intramedullary interlocked nailing appears to be a method of choice for internal fixation of osteoporotic and pathologic fractures. PMID:26021495

  16. Subsurface materials management and containment system

    DOEpatents

    Nickelson, Reva A.; Richardson, John G.; Kosteinik, Kevin M.; Sloan, Paul A.

    2004-07-06

    Systems, components, and methods relating to subterranean containment barriers. Laterally adjacent tubular casings having male interlock structures and multiple female interlock structures defining recesses for receiving a male interlock structure are used to create subterranean barriers for containing and treating buried waste and its effluents. The multiple female interlock structures enable the barriers to be varied around subsurface objects and to form barrier sidewalls. The barrier may be used for treating and monitoring a zone of interest.

  17. Subsurface materials management and containment system

    DOEpatents

    Nickelson, Reva A.; Richardson, John G.; Kostelnik, Kevin M.; Sloan, Paul A.

    2006-10-17

    Systems, components, and methods relating to subterranean containment barriers. Laterally adjacent tubular casings having male interlock structures and multiple female interlock structures defining recesses for receiving a male interlock structure are used to create subterranean barriers for containing and treating buried waste and its effluents. The multiple female interlock structures enable the barriers to be varied around subsurface objects and to form barrier sidewalls. The barrier may be used for treating and monitoring a zone of interest.

  18. Neutron activation analysis system

    DOEpatents

    Taylor, M.C.; Rhodes, J.R.

    1973-12-25

    A neutron activation analysis system for monitoring a generally fluid media, such as slurries, solutions, and fluidized powders, including two separate conduit loops for circulating fluid samples within the range of radiation sources and detectors is described. Associated with the first loop is a neutron source that emits s high flux of slow and thermal neutrons. The second loop employs a fast neutron source, the flux from which is substantially free of thermal neutrons. Adjacent to both loops are gamma counters for spectrographic determination of the fluid constituents. Other gsmma sources and detectors are arranged across a portion of each loop for deterMining the fluid density. (Official Gazette)

  19. European Neutron Activation System.

    2013-01-11

    Version 03 EASY-2010 (European Activation System) consists of a wide range of codes, data and documentation all aimed at satisfying the objective of calculating the response of materials irradiated in a neutron flux. The main difference from the previous version is the upper energy limit, which has increased from 20 to 60 MeV. It is designed to investigate both fusion devices and accelerator based materials test facilities that will act as intense sources of high-energymore » neutrons causing significant activation of the surrounding materials. The very general nature of the calculational method and the data libraries means that it is applicable (with some reservations) to all situations (e.g. fission reactors or neutron sources) where materials are exposed to neutrons below 60 MeV. EASY can be divided into two parts: data and code development tools and user tools and data. The former are required to develop the latter, but EASY users only need to be able to use the inventory code FISPACT and be aware of the contents of the EAF library (the data source). The complete EASY package contains the FISPACT-2007 inventory code, the EAF-2003, EAF-2005, EAF-2007 and EAF-2010 libraries, and the EASY User Interface for the Window version. The activation package EASY-2010 is the result of significant development to extend the upper energy range from 20 to 60 MeV so that it is capable of being used for IFMIF calculations. The EAF-2010 library contains 66,256 reactions, almost five times more than in EAF-2003 (12,617). Deuteron-induced and proton-induced cross section libraries are also included, and can be used with EASY to enable calculations of the activation due to deuterons and proton [2].« less

  20. D0 Central Tracking Solenoid Energizatino, Controls, Interlocks and Quench Protection Initial Validation Procedures

    SciTech Connect

    Jaskierny, W.; Hance, R.; /Fermilab

    1998-01-27

    This note presents the inspection and tests to be performed on the DZERO solenoid energization, controls, interlocks and quench protection system before it is energized for the first time. This test is to be performed with a 5000A jumper at the end of the bus instead of the solenoid. This system is based in DZERO room 511. A copy of this note shall be annotated, signed and dated by the person coordinating the procedure; and filed with the system maintenance records. Annotations shall include comments about any aspect of the procedure that is abnormal or unsuccessful. The following inspections and tests shall be performed by persons knowledgeable about the system. Each individual test step should be reviewed and understood before proceeding with that step.

  1. An evaluation of the Swedish ignition interlock program.

    PubMed

    Bjerre, Bo

    2003-01-01

    The Swedish alcohol ignition interlock program for driving while intoxicated (DWI) offenders, both first-time as well as multiple offenders, was launched as a pilot project in 1999. It is a volunteer program and differs in some respects from other programs: It covers a period of 2 years, it includes very strict medical regulations entailing regular checkups by a physician, it does not require a prior period of hard suspension, and it focuses strongly on changes in alcohol habits. Records from the 5 years prior to the offence showed that DWI offenders are generally in a high-risk category long before their offense, with a four to five times higher accident rate (road accidents reported by the police) and a three to four times higher rate of hospitalization due to a road accident. Only 12% of the eligible DWI offenders took part in the program and, of these, 60% could be diagnosed as alcohol dependent or alcohol abusers. During the program, alcohol consumption is monitored through self-esteem questionnaires (AUDIT) and five different biological markers. Our data show a noticeable reduction in alcohol consumption among the interlock users. This, combined with the high rate of compliance with the regulations, probably accounts for the fact that there was no case of recidivism during the program. Preliminary findings also suggest a reduction in the annual accident rate for interlock users while in the program. It still is too early to draw any conclusions concerning the rate of recidivism after completion of the program due to an insufficient amount of data for analysis. Nevertheless, the preliminary results are so promising that the program will now be expanded to cover all of Sweden as well as to include all driver's license categories.

  2. Method of sealing casings of subsurface materials management system

    DOEpatents

    Nickelson, Reva A.; Richardson, John G.; Kostelnik, Kevin M.; Sloan, Paul A.

    2007-02-06

    Systems, components, and methods relating to subterranean containment barriers. Laterally adjacent tubular casings having male interlock structures and multiple female interlock structures defining recesses for receiving a male interlock structure are used to create subterranean barriers for containing and treating buried waste and its effluents. The multiple female interlock structures enable the barriers to be varied around subsurface objects and to form barrier sidewalls. The barrier may be used for treating and monitoring a zone of interest.

  3. Photovoltaic module and interlocked stack of photovoltaic modules

    DOEpatents

    Wares, Brian S.

    2014-09-02

    One embodiment relates to an arrangement of photovoltaic modules configured for transportation. The arrangement includes a plurality of photovoltaic modules, each photovoltaic module including a frame. A plurality of individual male alignment features and a plurality of individual female alignment features are included on each frame. Adjacent photovoltaic modules are interlocked by multiple individual male alignment features on a first module of the adjacent photovoltaic modules fitting into and being surrounded by corresponding individual female alignment features on a second module of the adjacent photovoltaic modules. Other embodiments, features and aspects are also disclosed.

  4. Photovoltaic module and interlocked stack of photovoltaic modules

    DOEpatents

    Wares, Brian S.

    2012-09-04

    One embodiment relates to an arrangement of photovoltaic modules configured for transportation. The arrangement includes a plurality of photovoltaic modules, each photovoltaic module including a frame having at least a top member and a bottom member. A plurality of alignment features are included on the top member of each frame, and a plurality of alignment features are included on the bottom member of each frame. Adjacent photovoltaic modules are interlocked by the alignment features on the top member of a lower module fitting together with the alignment features on the bottom member of an upper module. Other embodiments, features and aspects are also disclosed.

  5. Stable three-dimensional metallic carbon with interlocking hexagons

    PubMed Central

    Zhang, Shunhong; Wang, Qian; Chen, Xiaoshuang; Jena, Puru

    2013-01-01

    Design and synthesis of 3D metallic carbon that is stable under ambient conditions has been a long-standing dream. We predict the existence of such phases, T6- and T14-carbon, consisting of interlocking hexagons. Their dynamic, mechanical, and thermal stabilities are confirmed by carrying out a variety of state-of-the-art theoretical calculations. Unlike the previously studied K4 and the simple cubic high pressure metallic phases, the structures predicted in this work are stable under ambient conditions. Equally important, they may be synthesized chemically by using benzene or polyacenes molecules. PMID:24191020

  6. 49 CFR 1242.58 - Operating signals and interlockers, operating drawbridges, highway crossing protection (accounts...

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... drawbridges, highway crossing protection (accounts XX-51-59, XX-51-60 and XX-51-61). 1242.58 Section 1242.58... Operating signals and interlockers, operating drawbridges, highway crossing protection (accounts XX-51-59..., interlockers, drawbridges and highway crossings are located....

  7. 49 CFR 1242.58 - Operating signals and interlockers, operating drawbridges, highway crossing protection (accounts...

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... drawbridges, highway crossing protection (accounts XX-51-59, XX-51-60 and XX-51-61). 1242.58 Section 1242.58... Operating signals and interlockers, operating drawbridges, highway crossing protection (accounts XX-51-59..., interlockers, drawbridges and highway crossings are located....

  8. 49 CFR 1242.58 - Operating signals and interlockers, operating drawbridges, highway crossing protection (accounts...

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... drawbridges, highway crossing protection (accounts XX-51-59, XX-51-60 and XX-51-61). 1242.58 Section 1242.58... Operating signals and interlockers, operating drawbridges, highway crossing protection (accounts XX-51-59..., interlockers, drawbridges and highway crossings are located....

  9. 49 CFR 1242.58 - Operating signals and interlockers, operating drawbridges, highway crossing protection (accounts...

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... drawbridges, highway crossing protection (accounts XX-51-59, XX-51-60 and XX-51-61). 1242.58 Section 1242.58... Operating signals and interlockers, operating drawbridges, highway crossing protection (accounts XX-51-59..., interlockers, drawbridges and highway crossings are located....

  10. 49 CFR 1242.58 - Operating signals and interlockers, operating drawbridges, highway crossing protection (accounts...

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... drawbridges, highway crossing protection (accounts XX-51-59, XX-51-60 and XX-51-61). 1242.58 Section 1242.58... Operating signals and interlockers, operating drawbridges, highway crossing protection (accounts XX-51-59..., interlockers, drawbridges and highway crossings are located....

  11. 49 CFR 571.102 - Standard No. 102; Transmission shift position sequence, starter interlock, and transmission...

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... position sequence, a starter interlock, and for a braking effect of automatic transmissions, to reduce the... 49 Transportation 6 2011-10-01 2011-10-01 false Standard No. 102; Transmission shift position sequence, starter interlock, and transmission braking effect. 571.102 Section 571.102 Transportation...

  12. 46 CFR 111.91-1 - Power, control, and interlock circuits.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... circuits. Each electric power, control, and interlock circuit of an elevator or dumbwaiter must meet ASME A17.1 (incorporated by reference; see 46 CFR 110.10-1). ... 46 Shipping 4 2010-10-01 2010-10-01 false Power, control, and interlock circuits. 111.91-1...

  13. 46 CFR 111.91-1 - Power, control, and interlock circuits.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... circuits. Each electric power, control, and interlock circuit of an elevator or dumbwaiter must meet ASME A17.1 (incorporated by reference; see 46 CFR 110.10-1). ... 46 Shipping 4 2012-10-01 2012-10-01 false Power, control, and interlock circuits. 111.91-1...

  14. 46 CFR 111.91-1 - Power, control, and interlock circuits.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... circuits. Each electric power, control, and interlock circuit of an elevator or dumbwaiter must meet ASME A17.1 (incorporated by reference; see 46 CFR 110.10-1). ... 46 Shipping 4 2014-10-01 2014-10-01 false Power, control, and interlock circuits. 111.91-1...

  15. 30 CFR 75.819 - Motor-starter enclosures; barriers and interlocks.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Motor-starter enclosures; barriers and...-Voltage Distribution High-Voltage Longwalls § 75.819 Motor-starter enclosures; barriers and interlocks. Compartment separation and cover interlock switches for motor-starter enclosures must be maintained...

  16. 30 CFR 75.819 - Motor-starter enclosures; barriers and interlocks.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Motor-starter enclosures; barriers and...-Voltage Distribution High-Voltage Longwalls § 75.819 Motor-starter enclosures; barriers and interlocks. Compartment separation and cover interlock switches for motor-starter enclosures must be maintained...

  17. 46 CFR 111.91-1 - Power, control, and interlock circuits.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... circuits. Each electric power, control, and interlock circuit of an elevator or dumbwaiter must meet ASME A17.1 (incorporated by reference; see 46 CFR 110.10-1). ... 46 Shipping 4 2011-10-01 2011-10-01 false Power, control, and interlock circuits. 111.91-1...

  18. Single-Stranded Tile Stoppers for Interlocked DNA Architectures.

    PubMed

    Valero, Julián; Lohmann, Finn; Keppner, Daniel; Famulok, Michael

    2016-06-16

    Interlocked DNA architectures are useful for DNA nanotechnology because of their mechanically bonded components, which can move relative to one another without disassembling. We describe the design, synthesis, and characterization of novel single-stranded tile (SST) stoppers for the assembly of interlocked DNA architectures. SST stoppers are shown to self-assemble into a square-shaped rigid structure upon mixing 97 oligodeoxynucleotide (ODN) strands. The structures are equipped with a sticky end that is designed for hybridization with the sticky ends of a dsDNA axle of a DNA rotaxane. Because the diameter of the macrocycle threaded onto the axle is 14 nm, the dimension of the square-shaped stopper was designed to be bulky enough to prevent the dethreading of the macrocycle. An asymmetric rotaxane with a SST- and a ring-shaped stopper featuring two stations for hybridization of the macrocycle to the axle was assembled. The macrocycle can be directed towards one or the other station upon triggering with fuel ODNs.

  19. Single-Stranded Tile Stoppers for Interlocked DNA Architectures.

    PubMed

    Valero, Julián; Lohmann, Finn; Keppner, Daniel; Famulok, Michael

    2016-06-16

    Interlocked DNA architectures are useful for DNA nanotechnology because of their mechanically bonded components, which can move relative to one another without disassembling. We describe the design, synthesis, and characterization of novel single-stranded tile (SST) stoppers for the assembly of interlocked DNA architectures. SST stoppers are shown to self-assemble into a square-shaped rigid structure upon mixing 97 oligodeoxynucleotide (ODN) strands. The structures are equipped with a sticky end that is designed for hybridization with the sticky ends of a dsDNA axle of a DNA rotaxane. Because the diameter of the macrocycle threaded onto the axle is 14 nm, the dimension of the square-shaped stopper was designed to be bulky enough to prevent the dethreading of the macrocycle. An asymmetric rotaxane with a SST- and a ring-shaped stopper featuring two stations for hybridization of the macrocycle to the axle was assembled. The macrocycle can be directed towards one or the other station upon triggering with fuel ODNs. PMID:26972112

  20. Optical screw-wrench for interlocking 2PP-microstructures

    NASA Astrophysics Data System (ADS)

    Köhler, J.; Zyla, G.; Ksouri, S. I.; Esen, C.; Ostendorf, A.

    2016-03-01

    Two-photon polymerization (2PP) has emerged as a powerful platform for processing three-dimensional microstructures with high resolution. Furthermore, by adding nanoparticles of different materials to the photopolymer the microstructures can be functionalized, e.g. magnetic or electric properties can be adjusted. However, to combine different functions within one microstructure or to manufacture complex microsystems, assembling techniques for multiple 2PP written building blocks are required. In this paper a qualitative approach for assembling microstructures utilizing optical forces is presented. Therefore, screw and nut shaped microstructures are produced by 2PP-technique and screwed together using a holographic optical tweezer (HOT). The interlocking structures are trapped and rotated into each other to cause connection. In this paper the used parameters and possible designs of the interlocking connection are discussed. These findings provide not only the assembling of building blocks to complex microstructures, rather different functionalized 2PP-microstructures can be combined by simply screwing them together with the use of optical forces.

  1. Venous Sac Embolization of Pulmonary Arteriovenous Malformation: Preliminary Experience Using Interlocking Detachable Coils

    SciTech Connect

    Takahashi, Koji; Tanimura, Keiichi; Honda, Masanori; Kikuno, Motoyuki; Toei, Hisao; Hyodoh, Hideki; Furuse, Makoto; Yamada, Tomonori; Aburano, Tamio

    1999-05-15

    Purpose: To evaluate the indication and advantages of venous sac embolization of pulmonary arteriovenous malformations (PAVMs) using interlocking detachable coils (IDCs). Methods: We performed percutaneous embolization in 12 PAVMs in four patients using IDCs, initially placed in the venous sac or at the feeding artery to prevent systemic migration of additional coils. We placed the IDCs in the venous sac in PAVMs with the following vascular architecture: the draining vein was larger than the feeding arteries and both vessels were interposed with the venous sac or there were short feeding arteries. Results: Complete occlusion was achieved in all 12 PAVMs without significant complications. We deployed IDCs in the venous sac in eight PAVMs and in the feeding artery in four. Conclusion: Venous sac embolization may be beneficial in PAVMs with large out-flow vessels or short feeding arteries. IDCs are suitable for this procedure.

  2. Paper-Based Triboelectric Nanogenerators Made of Stretchable Interlocking Kirigami Patterns.

    PubMed

    Wu, Changsheng; Wang, Xin; Lin, Long; Guo, Hengyu; Wang, Zhong Lin

    2016-04-26

    The development of stretchable energy generation devices is indispensable for achieving stretchable, self-powered electronic systems. In this paper, a type of highly stretchable triboelectric nanogenerators made from conventional, inelastic materials such as paper is presented. It exploits a rationally designed interlocking kirigami structure and is capable of harvesting energy from various types of motions such as stretching, pressing, and twisting owing to the shape-adaptive thin film design. Energy harvested from the as-fabricated devices has been used for powering an LCD screen and lighting LED arrays. Furthermore, the paper-based devices have also been demonstrated for self-powered acceleration sensing and self-powered sensing of book opening and closing. This work introduces traditional kirigami into the development of stretchable triboelectric nanogenerators and verifies its promising applications in both power generation and self-powered sensing. PMID:27058268

  3. Switchable Reconfiguration of a Seven-Ring Interlocked DNA Catenane Nanostructure.

    PubMed

    Lu, Chun-Hua; Cecconello, Alessandro; Qi, Xiu-Juan; Wu, Na; Jester, Stefan-Sven; Famulok, Michael; Matthies, Michael; Schmidt, Thorsten-Lars; Willner, Itamar

    2015-10-14

    The synthesis, purification, and structure characterization of a seven-ring interlocked DNA catenane is described. The design of the seven-ring catenane allows the dynamic reconfiguration of any of the four rings (R1, R3, R4, and R6) on the catenane scaffold, or the simultaneous switching of any combination of two, three, or all four rings to yield 16 different isomeric states of the catenane. The dynamic reconfiguration across the states is achieved by implementing the strand-displacement process in the presence of appropriate fuel/antifuel strands and is probed by fluorescence spectroscopy. Each of the 16 isomers of the catenane can be transformed into any of the other isomers, thus allowing for 240 dynamic transitions within the system. PMID:26360345

  4. An extreme-halophile archaebacterium possesses the interlock type of prephenate dehydratase characteristic of the Gram-positive eubacteria.

    PubMed

    Jensen, R A; d'Amato, T A; Hochstein, L I

    1988-01-01

    The focal point of phenylalanine biosynthesis is a dehydratase reaction which in different organisms may be prephenate dehydratase, arogenate dehydratase, or cyclohexadienyl dehydratase. Gram-positive, Gram-negative, and cyanobacterial divisions of the eubacterial kingdom exhibit different dehydratase patterns. A new extreme-halophile isolate, which grows on defined medium and is tentatively designated as Halobacterium vallismortis CH-1, possesses the interlock type of prephenate dehydratase present in Gram-positive bacteria. In addition to the conventional sensitivity to feedback inhibition by L-phenylalanine, the phenomenon of metabolic interlock was exemplified by the sensitivity of prephenate dehydratase to allosteric effects produced by extra-pathway (remote) effectors. Thus, L-tryptophan inhibited activity while L-tyrosine, L-methionine, L-leucine and L-isoleucine activated the enzyme. L-Isoleucine and L-phenylalanine were effective at micromolar levels; other effectors operated at mM levels. A regulatory mutant selected for resistance to growth inhibition caused by beta-2-thienylalanine possessed an altered prephenate dehydratase in which a phenomenon of disproportionately low activity at low enzyme concentration was abolished. Inhibition by L-tryptophan was also lost, and activation by allosteric activators was diminished. Not only was sensitivity to feedback inhibition by L-phenylalanine lost, but the mutant enzyme was now activated by this amino acid (a mutation type previously observed in Bacillus subtilis). It remains to be seen whether this type of prephenate dehydratase will prove to be characteristic of all archaebacteria or of some archaebacterial subgroup cluster.

  5. An extreme-halophile archaebacterium possesses the interlock type of prephenate dehydratase characteristic of the Gram-positive eubacteria

    NASA Technical Reports Server (NTRS)

    Jensen, R. A.; d'Amato, T. A.; Hochstein, L. I.

    1988-01-01

    The focal point of phenylalanine biosynthesis is a dehydratase reaction which in different organisms may be prephenate dehydratase, arogenate dehydratase, or cyclohexadienyl dehydratase. Gram-positive, Gram-negative, and cyanobacterial divisions of the eubacterial kingdom exhibit different dehydratase patterns. A new extreme-halophile isolate, which grows on defined medium and is tentatively designated as Halobacterium vallismortis CH-1, possesses the interlock type of prephenate dehydratase present in Gram-positive bacteria. In addition to the conventional sensitivity to feedback inhibition by L-phenylalanine, the phenomenon of metabolic interlock was exemplified by the sensitivity of prephenate dehydratase to allosteric effects produced by extra-pathway (remote) effectors. Thus, L-tryptophan inhibited activity while L-tyrosine, L-methionine, L-leucine and L-isoleucine activated the enzyme. L-Isoleucine and L-phenylalanine were effective at micromolar levels; other effectors operated at mM levels. A regulatory mutant selected for resistance to growth inhibition caused by beta-2-thienylalanine possessed an altered prephenate dehydratase in which a phenomenon of disproportionately low activity at low enzyme concentration was abolished. Inhibition by L-tryptophan was also lost, and activation by allosteric activators was diminished. Not only was sensitivity to feedback inhibition by L-phenylalanine lost, but the mutant enzyme was now activated by this amino acid (a mutation type previously observed in Bacillus subtilis). It remains to be seen whether this type of prephenate dehydratase will prove to be characteristic of all archaebacteria or of some archaebacterial subgroup cluster.

  6. Subsurface materials management and containment system, components thereof and methods relating thereto

    DOEpatents

    Nickelson, Reva A.; Richardson, John G.; Kostelnik, Kevin M.; Sloan, Paul A.

    2006-04-18

    Systems, components, and methods relating to subterranean containment barriers. Laterally adjacent tubular casings having male interlock structures and multiple female interlock structures defining recesses for receiving a male interlock structure are used to create subterranean barriers for containing and treating buried waste and its effluents. The multiple female interlock structures enable the barriers to be varied around subsurface objects and to form barrier sidewalls. The barrier may be used for treating and monitoring a zone of interest.

  7. Mathematical Identification of Critical Reactions in the Interlocked Feedback Model

    PubMed Central

    Kurata, Hiroyuki; Tanaka, Takayuki; Ohnishi, Fumitaka

    2007-01-01

    Dynamic simulations are necessary for understanding the mechanism of how biochemical networks generate robust properties to environmental stresses or genetic changes. Sensitivity analysis allows the linking of robustness to network structure. However, it yields only local properties regarding a particular choice of plausible parameter values, because it is hard to know the exact parameter values in vivo. Global and firm results are needed that do not depend on particular parameter values. We propose mathematical analysis for robustness (MAR) that consists of the novel evolutionary search that explores all possible solution vectors of kinetic parameters satisfying the target dynamics and robustness analysis. New criteria, parameter spectrum width and the variability of solution vectors for parameters, are introduced to determine whether the search is exhaustive. In robustness analysis, in addition to single parameter sensitivity analysis, robustness to multiple parameter perturbation is defined. Combining the sensitivity analysis and the robustness analysis to multiple parameter perturbation enables identifying critical reactions. Use of MAR clearly identified the critical reactions responsible for determining the circadian cycle in the Drosophila interlocked circadian clock model. In highly robust models, while the parameter vectors are greatly varied, the critical reactions with a high sensitivity are uniquely determined. Interestingly, not only the per-tim loop but also the dclk-cyc loop strongly affect the period of PER, although the dclk-cyc loop hardly changes its amplitude and it is not potentially influential. In conclusion, MAR is a powerful method to explore wide parameter space without human-biases and to link a robust property to network architectures without knowing the exact parameter values. MAR identifies the reactions critically responsible for determining the period and amplitude in the interlocked feedback model and suggests that the circadian

  8. Physiologic activities of the contact activation system.

    PubMed

    Schmaier, Alvin H

    2014-05-01

    The plasma contact activation (CAS) and kallikrein/kinin (KKS) systems consist of 4 proteins: factor XII, prekallikrein, high molecular weight kininogen, and the bradykinin B2 receptor. Murine genetic deletion of factor XII (F12(-/-)), prekallikrein (Klkb1(-/-)), high molecular weight kininogen (Kgn1(-/-)) and the bradykinin B2 receptor (Bdkrb2(-/-)) yield animals protected from thrombosis. With possible exception of F12(-/-) and Kgn1(-/-) mice, the mechanism(s) for thrombosis protection is not reduced contact activation. Bdkrb2(-/-) mice are best characterized and they are protected from thrombosis through over expression of components of the renin angiotensin system (RAS) leading to elevated prostacyclin with vascular and platelet inhibition. Alternatively, prolylcarboxypeptidase, a PK activator and degrader of angiotensin II, when deficient in the mouse leads to a prothrombotic state. Its mechanism for increased thrombosis also is mediated in part by components of the RAS. These observations suggest that thrombosis in mice of the CAS and KKS are mediated in part through the RAS and independent of reduced contact activation. PMID:24759141

  9. High-power fiber optic cable with integrated active sensors for live process monitoring

    NASA Astrophysics Data System (ADS)

    Blomster, Ola; Blomqvist, Mats; Bergstrand, Hans; Pålsson, Magnus

    2012-03-01

    In industrial applications using high-brilliance lasers at power levels up to and exceeding 20 kW and similarly direct diode lasers of 10 kW, there is an increasing demand to continuously monitor component status even in passive components such as fiber-optic cables. With fiber-optic cables designed according to the European Automotive Industry fiber standard interface there is room for integrating active sensors inside the connectors. In this paper we present the integrated active sensors in the new Optoskand QD fiber-optic cable designed to handle extreme levels of power losses, and how these sensors can be employed in industrial manufacturing. The sensors include photo diodes for detection of scattered light inside the fiber connector, absolute temperature of the fiber connector, difference in temperature of incoming and outgoing cooling water, and humidity measurement inside the fiber connector. All these sensors are connected to the fiber interlock system, where interlock break enable functions can be activated when measured signals are higher than threshold levels. It is a very fast interlock break system as the control of the signals is integrated in the electronics inside the fiber connector. Also, since all signals can be logged it is possible to evaluate what happened inside the connector before the interlock break instance. The communication to the fiber-optic connectors is via a CAN interface. Thus it is straightforward to develop the existing laser host control to also control the CAN-messages from the QD sensors.

  10. DESIGN NOTE: A simple interlocked controller for research vacuum systems

    NASA Astrophysics Data System (ADS)

    Freegarde, Tim; Jessup, Jim; Hancock, Gus

    2001-12-01

    We describe a simple, low-cost circuit that we use to control and supervise the operation of a radio-frequency plasma chamber. The unit has been designed for flexibility and ease of construction, all control logic being programmed into read-only memories. Feedback allows the unit to operate as a state machine, offering a limited degree of control complexity without the need for more than a simple EPROM programmer.

  11. Interlock recovery during the drying, calcination and vitrification phase of Am/Cm processing

    SciTech Connect

    Snyder, T.K.

    2000-01-20

    This document summarizes the results of five CIM5 [5-inch Cylindrical Induction Melter] runs designed to demonstrate power interlock recovery methods during the drying, calcination and vitrification phases of the Am/Cm melter cycle.

  12. Cloning Nacre's 3D Interlocking Skeleton in Engineering Composites to Achieve Exceptional Mechanical Properties.

    PubMed

    Zhao, Hewei; Yue, Yonghai; Guo, Lin; Wu, Juntao; Zhang, Youwei; Li, Xiaodong; Mao, Shengcheng; Han, Xiaodong

    2016-07-01

    Ceramic/polymer composite equipped with 3D interlocking skeleton (3D IL) is developed through a simple freeze-casting method, exhibiting exceptionally light weight, high strength, toughness, and shock resistance. Long-range crack energy dissipation enabled by 3D interlocking structure is considered as the primary reinforcing mechanism for such superior properties. The smart composite design strategy should hold a place in developing future structural engineering materials.

  13. Cloning Nacre's 3D Interlocking Skeleton in Engineering Composites to Achieve Exceptional Mechanical Properties.

    PubMed

    Zhao, Hewei; Yue, Yonghai; Guo, Lin; Wu, Juntao; Zhang, Youwei; Li, Xiaodong; Mao, Shengcheng; Han, Xiaodong

    2016-07-01

    Ceramic/polymer composite equipped with 3D interlocking skeleton (3D IL) is developed through a simple freeze-casting method, exhibiting exceptionally light weight, high strength, toughness, and shock resistance. Long-range crack energy dissipation enabled by 3D interlocking structure is considered as the primary reinforcing mechanism for such superior properties. The smart composite design strategy should hold a place in developing future structural engineering materials. PMID:27135462

  14. Active Response Gravity Offload System

    NASA Technical Reports Server (NTRS)

    Valle, Paul; Dungan, Larry; Cunningham, Thomas; Lieberman, Asher; Poncia, Dina

    2011-01-01

    The Active Response Gravity Offload System (ARGOS) provides the ability to simulate with one system the gravity effect of planets, moons, comets, asteroids, and microgravity, where the gravity is less than Earth fs gravity. The system works by providing a constant force offload through an overhead hoist system and horizontal motion through a rail and trolley system. The facility covers a 20 by 40-ft (approximately equals 6.1 by 12.2m) horizontal area with 15 ft (approximately equals4.6 m) of lifting vertical range.

  15. Biomechanical analyses of static and dynamic fixation techniques of retrograde interlocking femoral nailing using nonlinear finite element methods.

    PubMed

    Shih, Kao-Shang; Hsu, Ching-Chi; Hsu, Tzu-Pin; Hou, Sheng-Mou; Liaw, Chen-Kun

    2014-02-01

    Femoral shaft fractures can be treated using retrograde interlocking nailing systems; however, fracture nonunion still occurs. Dynamic fixation techniques, which remove either the proximal or distal locking screws, have been used to solve the problem of nonunion. In addition, a surgical rule for dynamic fixation techniques has been defined based on past clinical reports. However, the biomechanical performance of the retrograde interlocking nailing systems with either the traditional static fixation technique or the dynamic fixation techniques has not been investigated by using nonlinear numerical modeling. Three-dimensional nonlinear finite element models were developed, and the implant strength, fixation stability, and contact area of the fracture surfaces were evaluated. Three types of femoral shaft fractures (a proximal femoral shaft fracture, a middle femoral shaft fracture, and a distal femoral shaft fracture) fixed by three fixation techniques (insertion of all the locking screws, removal of the proximal locking screws, or removal of the distal locking screws) were analyzed. The results showed that the static fixation technique resulted in sufficient fixation stability and that the dynamic fixation techniques decreased the failure risk of the implant and produced a larger contact area of the fracture surfaces. The outcomes of the current study could assist orthopedic surgeons in comprehending the biomechanical performances of both static and dynamic fixation techniques. In addition, the surgeons could also select a fixation technique based on the specific patient situation using the numerical outcomes of this study.

  16. Modeling approaches for active systems

    NASA Astrophysics Data System (ADS)

    Herold, Sven; Atzrodt, Heiko; Mayer, Dirk; Thomaier, Martin

    2006-03-01

    To solve a wide range of vibration problems with the active structures technology, different simulation approaches for several models are needed. The selection of an appropriate modeling strategy is depending, amongst others, on the frequency range, the modal density and the control target. An active system consists of several components: the mechanical structure, at least one sensor and actuator, signal conditioning electronics and the controller. For each individual part of the active system the simulation approaches can be different. To integrate the several modeling approaches into an active system simulation and to ensure a highly efficient and accurate calculation, all sub models must harmonize. For this purpose, structural models considered in this article are modal state-space formulations for the lower frequency range and transfer function based models for the higher frequency range. The modal state-space formulations are derived from finite element models and/or experimental modal analyses. Consequently, the structure models which are based on transfer functions are directly derived from measurements. The transfer functions are identified with the Steiglitz-McBride iteration method. To convert them from the z-domain to the s-domain a least squares solution is implemented. An analytical approach is used to derive models of active interfaces. These models are transferred into impedance formulations. To couple mechanical and electrical sub-systems with the active materials, the concept of impedance modeling was successfully tested. The impedance models are enhanced by adapting them to adequate measurements. The controller design strongly depends on the frequency range and the number of modes to be controlled. To control systems with a small number of modes, techniques such as active damping or independent modal space control may be used, whereas in the case of systems with a large number of modes or with modes that are not well separated, other control

  17. Cement oscillation increases interlock strength at the cement-bone interface, with commentary.

    PubMed

    Wang, Yi; Han, Pengfei; Gu, Wenguang; Shi, Zuowei; Li, Dabin; Wang, Changli

    2009-05-01

    Modern cementing techniques aim to improve the interlock between bone and cement and to establish a durable interface. Cement penetration is generally believed to influence interface failure, but current methods for improving the cement-bone interface are inadequate. Oscillation is the reciprocated movement of an object through its balanced position, or the quantum physics of systematic fluctuation back and forth near an average value (or trimmed value). To increase the interlock strength at the cement-bone interface, we designed a cement oscillator according to the principles of vibrational mechanics. To evaluate the effect of oscillation on the quality of interlock strength at the cement-bone interface, we randomly divided 156 femoral bones of adult pigs into 2 groups, oscillated and control, and performed mechanical tests to assess interlock strength at the cement-bone interface. The filling effect of bone cement was observed and analyzed under a stereomicroscope, and then each oscillated femur was compared with a control femur. The interlock strength at the cement-bone interface in the oscillated group was significantly greater than in the control group (P<.05), and the filling effect in the oscillated group was also better than that in the control group (P<.05). Our findings show that oscillation of bone cement significantly increases interlock strength at the cement-bone interface, point the way for clinicians to develop a high-performance and pragmatic fixation technique for prostheses to increase interlock strength, and will be of considerable practical importance in helping to prevent aseptic loosening of cemented prostheses.

  18. Bond strength: a comparison between chemical coated and mechanical interlock bases of ceramic and metal brackets.

    PubMed

    Wang, W N; Meng, C L; Tarng, T H

    1997-04-01

    Two types of chemically coated bases, two types of mechanical interlock base polycrystalline ceramic brackets, as well as one type of mechanical interlock base metal bracket were selected for bonding with Concise orthodontic resin on 60 extracted premolars. Bond strength was measured with an Instron testing machine and the debonded interface and enamel detachment were examined with scanning electron microscope and energy dispersive x-ray spectrometer. The results showed the greater bond strength with a chemically coated base of ceramic brackets had a greater debonded interface between enamel and resin, and the weaker bond strength of mechanical interlock base of ceramic and metal brackets had a greater debonded interfaces between bracket and resin. There was no significant statistical difference in bond strengths with mechanically interlock bases between ceramic and metal brackets. The enamel detachment was found on only the stronger bond strength in which there was a chemically coated base on the ceramic bracket. Ceramic bracket fractures were not found during debonding in this specially designed specimen with 1 mm/min speed of crosshead. The mechanical interlock base of the ceramic bracket combines the strength, durability and retention of a metal bracket along with an aesthetic advantage and no enamel detachment after debonding. PMID:9109582

  19. Topoisomerase-Based Preparation and AFM Imaging of Multi-Interlocked Circular DNA.

    PubMed

    Li, Tevin; Zhang, Hao; Hu, Lianzhe; Shao, Fangwei

    2016-03-16

    Multi-interlocked circular DNA structures have been in high demand for fabricating complicated functional DNA architectures and nanodevices such as molecular switches, shuttles, and motors. Even though various innovative methods have been developed in the past, creation of multi-interlocked circular DNA structures with defined numbers of DNA molecules and linking patterns is still a challenging task nowadays. Here, we propose a top-down decatenation of kinetoplast DNA as a new approach for creating multi-interlocked circular DNA structures. Through optimizing the amount and reaction time of topoisomerase II, we synthesized completely mutually interlocked tricircular, tetra-circular, and oligo-circular DNA structures, which have not yet been acquirable through any other existing synthetic means. The catenation structures of multiple circular DNA were further verified through atomic force microscopic analysis of the backbone overlapping patterns and the circumference. It accordingly is our expectation that the top-down enzymatic approaches could offer a highly interlocked network with defined numbers of circular DNA with simple protocols, and could consequently be beneficial to the design and fabrication of sophisticated functional molecules and nanodevices in the areas of supramolecular chemistry, DNA nanotechnology, and material science. PMID:26745453

  20. Being Present in Action: A Theoretical Model About the "Interlocking" Between Intentions and Environmental Affordances.

    PubMed

    Triberti, Stefano; Riva, Giuseppe

    2015-01-01

    Recent neuropsychological evidence suggest that a key role in linking perceptions and intentions is played by sense of presence. Despite this phenomenon having been studied primarily in the field of virtual reality (conceived as the illusion of being in the virtual space), recent research highlighted that it is a fundamental feature of everyday experience. Specifically, the function of presence as a cognitive process is to locate the Self in a physical space or situation, based on the perceived possibility to act in it; so, the variations in sense of presence allow one to continuously adapt his own action to the external environment. Indeed intentions, as the cognitive antecedents of action, are not static representations of the desired outcomes, but dynamic processes able to adjust their own representational content according to the opportunities/restrictions emerging in the environment. Focusing on the peculiar context of action mediated by interactive technologies, we here propose a theoretical model showing how each level of an intentional hierarchy (future-directed; present directed; and motor intentions) can "interlock" with environmental affordances in order to promote a continuous stream of action and activity. PMID:26834670

  1. Dynamically variable spot size laser system

    NASA Technical Reports Server (NTRS)

    Gradl, Paul R. (Inventor); Hurst, John F. (Inventor); Middleton, James R. (Inventor)

    2012-01-01

    A Dynamically Variable Spot Size (DVSS) laser system for bonding metal components includes an elongated housing containing a light entry aperture coupled to a laser beam transmission cable and a light exit aperture. A plurality of lenses contained within the housing focus a laser beam from the light entry aperture through the light exit aperture. The lenses may be dynamically adjusted to vary the spot size of the laser. A plurality of interoperable safety devices, including a manually depressible interlock switch, an internal proximity sensor, a remotely operated potentiometer, a remotely activated toggle and a power supply interlock, prevent activation of the laser and DVSS laser system if each safety device does not provide a closed circuit. The remotely operated potentiometer also provides continuous variability in laser energy output.

  2. A flexible and highly sensitive strain-gauge sensor using reversible interlocking of nanofibres

    NASA Astrophysics Data System (ADS)

    Pang, Changhyun; Lee, Gil-Yong; Kim, Tae-Il; Kim, Sang Moon; Kim, Hong Nam; Ahn, Sung-Hoon; Suh, Kahp-Yang

    2012-09-01

    Flexible skin-attachable strain-gauge sensors are an essential component in the development of artificial systems that can mimic the complex characteristics of the human skin. In general, such sensors contain a number of circuits or complex layered matrix arrays. Here, we present a simple architecture for a flexible and highly sensitive strain sensor that enables the detection of pressure, shear and torsion. The device is based on two interlocked arrays of high-aspect-ratio Pt-coated polymeric nanofibres that are supported on thin polydimethylsiloxane layers. When different sensing stimuli are applied, the degree of interconnection and the electrical resistance of the sensor changes in a reversible, directional manner with specific, discernible strain-gauge factors. The sensor response is highly repeatable and reproducible up to 10,000 cycles with excellent on/off switching behaviour. We show that the sensor can be used to monitor signals ranging from human heartbeats to the impact of a bouncing water droplet on a superhydrophobic surface.

  3. Mechanical interlocking of cotton fibers on slightly textured surfaces of metallic cylinders

    NASA Astrophysics Data System (ADS)

    Zhang, Youqiang; Tian, Yu; Meng, Yonggang

    2016-05-01

    Mechanical interlocking is widely applied in industry and general lives of human beings. In this work, we realized the control of locking or sliding states of cotton fibers on the metal surfaces with slightly different textures through traditional machining. Three types of sliding states, i.e., locking, one-way sliding, and two-way sliding have been achieved. It is found that the locking or sliding of the cotton fibers on the metallic cylinder depends on the friction coefficient and the ratio of cotton fiber diameter, 2r, to the height of the rough peaks, h, of metal surfaces. When the critical ratio h/r exceeds 1, the cotton fibers could tightly attach to the metallic surface through mechanical interlocking. This work provided a convenient and universal method for the control of interlocking or sliding of fiber-based materials on textured surfaces.

  4. Mechanical interlocking of cotton fibers on slightly textured surfaces of metallic cylinders

    PubMed Central

    Zhang, Youqiang; Tian, Yu; Meng, Yonggang

    2016-01-01

    Mechanical interlocking is widely applied in industry and general lives of human beings. In this work, we realized the control of locking or sliding states of cotton fibers on the metal surfaces with slightly different textures through traditional machining. Three types of sliding states, i.e., locking, one-way sliding, and two-way sliding have been achieved. It is found that the locking or sliding of the cotton fibers on the metallic cylinder depends on the friction coefficient and the ratio of cotton fiber diameter, 2r, to the height of the rough peaks, h, of metal surfaces. When the critical ratio h/r exceeds 1, the cotton fibers could tightly attach to the metallic surface through mechanical interlocking. This work provided a convenient and universal method for the control of interlocking or sliding of fiber-based materials on textured surfaces. PMID:27156720

  5. Interlocking intramedullary nail stabilization of a femoral fracture in a dog with osteomyelitis.

    PubMed

    Muir, P; Johnson, K A

    1996-10-01

    Complications developed in a dog that underwent intramedullary pin and cerclage wire fixation of a comminuted femoral fracture. The fracture was unstable, the intramedullary pin protruded through the skin over the hip, and Staphylococcus sp was isolated from the fracture site. The loose pin was removed, and the fracture was restabilized with a 6.0-mm interlocking intramedullary nail and 3 interlocking screws. Cephalexin was given orally for 6 weeks. Eight weeks after the second surgery, the fracture was healed radiographically. Seventeen months later, the dog had a persistent mild lameness that was associated with low-grade osteomyelitis. The lameness resolved after the implants were removed, and antibiotics were administered. In human beings, interlocking intramedullary nail stabilization is an accepted treatment for open and contaminated fractures. Chronic infection of bone may be attributable to bacteria in biofilm surrounding implants, necessitating implant removal for resolution.

  6. Mechanical interlocking of cotton fibers on slightly textured surfaces of metallic cylinders.

    PubMed

    Zhang, Youqiang; Tian, Yu; Meng, Yonggang

    2016-01-01

    Mechanical interlocking is widely applied in industry and general lives of human beings. In this work, we realized the control of locking or sliding states of cotton fibers on the metal surfaces with slightly different textures through traditional machining. Three types of sliding states, i.e., locking, one-way sliding, and two-way sliding have been achieved. It is found that the locking or sliding of the cotton fibers on the metallic cylinder depends on the friction coefficient and the ratio of cotton fiber diameter, 2r, to the height of the rough peaks, h, of metal surfaces. When the critical ratio h/r exceeds 1, the cotton fibers could tightly attach to the metallic surface through mechanical interlocking. This work provided a convenient and universal method for the control of interlocking or sliding of fiber-based materials on textured surfaces. PMID:27156720

  7. Solar active region display system

    NASA Astrophysics Data System (ADS)

    Golightly, M.; Raben, V.; Weyland, M.

    2003-04-01

    The Solar Active Region Display System (SARDS) is a client-server application that automatically collects a wide range of solar data and displays it in a format easy for users to assimilate and interpret. Users can rapidly identify active regions of interest or concern from color-coded indicators that visually summarize each region's size, magnetic configuration, recent growth history, and recent flare and CME production. The active region information can be overlaid onto solar maps, multiple solar images, and solar difference images in orthographic, Mercator or cylindrical equidistant projections. Near real-time graphs display the GOES soft and hard x-ray flux, flare events, and daily F10.7 value as a function of time; color-coded indicators show current trends in soft x-ray flux, flare temperature, daily F10.7 flux, and x-ray flare occurrence. Through a separate window up to 4 real-time or static graphs can simultaneously display values of KP, AP, daily F10.7 flux, GOES soft and hard x-ray flux, GOES >10 and >100 MeV proton flux, and Thule neutron monitor count rate. Climatologic displays use color-valued cells to show F10.7 and AP values as a function of Carrington/Bartel's rotation sequences - this format allows users to detect recurrent patterns in solar and geomagnetic activity as well as variations in activity levels over multiple solar cycles. Users can customize many of the display and graph features; all displays can be printed or copied to the system's clipboard for "pasting" into other applications. The system obtains and stores space weather data and images from sources such as the NOAA Space Environment Center, NOAA National Geophysical Data Center, the joint ESA/NASA SOHO spacecraft, and the Kitt Peak National Solar Observatory, and can be extended to include other data series and image sources. Data and images retrieved from the system's database are converted to XML and transported from a central server using HTTP and SOAP protocols, allowing

  8. 49 CFR 1242.17 - Signals and interlockers (accounts XX-17-19 and XX-18-19).

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 9 2014-10-01 2014-10-01 false Signals and interlockers (accounts XX-17-19 and XX... RAILROADS 1 Operating Expenses-Way and Structures § 1242.17 Signals and interlockers (accounts XX-17-19 and XX-18-19). Separate common expenses on the basis of the total train-hours in running service,...

  9. 49 CFR 1242.17 - Signals and interlockers (accounts XX-17-19 and XX-18-19).

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 9 2012-10-01 2012-10-01 false Signals and interlockers (accounts XX-17-19 and XX... RAILROADS 1 Operating Expenses-Way and Structures § 1242.17 Signals and interlockers (accounts XX-17-19 and XX-18-19). Separate common expenses on the basis of the total train-hours in running service,...

  10. 49 CFR 1242.17 - Signals and interlockers (accounts XX-17-19 and XX-18-19).

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 9 2011-10-01 2011-10-01 false Signals and interlockers (accounts XX-17-19 and XX... RAILROADS 1 Operating Expenses-Way and Structures § 1242.17 Signals and interlockers (accounts XX-17-19 and XX-18-19). Separate common expenses on the basis of the total train-hours in running service,...

  11. 49 CFR 1242.17 - Signals and interlockers (accounts XX-17-19 and XX-18-19).

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 9 2013-10-01 2013-10-01 false Signals and interlockers (accounts XX-17-19 and XX... RAILROADS 1 Operating Expenses-Way and Structures § 1242.17 Signals and interlockers (accounts XX-17-19 and XX-18-19). Separate common expenses on the basis of the total train-hours in running service,...

  12. 49 CFR 1242.17 - Signals and interlockers (accounts XX-17-19 and XX-18-19).

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 9 2010-10-01 2010-10-01 false Signals and interlockers (accounts XX-17-19 and XX... RAILROADS 1 Operating Expenses-Way and Structures § 1242.17 Signals and interlockers (accounts XX-17-19 and XX-18-19). Separate common expenses on the basis of the total train-hours in running service,...

  13. Active thermal control system evolution

    NASA Technical Reports Server (NTRS)

    Petete, Patricia A.; Ames, Brian E.

    1991-01-01

    The 'restructured' baseline of the Space Station Freedom (SSF) has eliminated many of the growth options for the Active Thermal Control System (ATCS). Modular addition of baseline technology to increase heat rejection will be extremely difficult. The system design and the available real estate no longer accommodate this type of growth. As the station matures during its thirty years of operation, a demand of up to 165 kW of heat rejection can be expected. The baseline configuration will be able to provide 82.5 kW at Eight Manned Crew Capability (EMCC). The growth paths necessary to reach 165 kW have been identified. Doubling the heat rejection capability of SSF will require either the modification of existing radiator wings or the attachment of growth structure to the baseline truss for growth radiator wing placement. Radiator performance can be improved by enlarging the surface area or by boosting the operating temperature with a heat pump. The optimal solution will require both modifications. The addition of growth structure would permit the addition of a parallel ATCS using baseline technology. This growth system would simplify integration. The feasibility of incorporating these growth options to improve the heat rejection capacity of SSF is under evaluation.

  14. Instrumentation and control of the Doublet III Neutral Beam Injector System

    SciTech Connect

    Kohli, J.C.; Moore, C.D.; Drobnis, D.D.; Elischer, V.P.; Kilgore, R.; Uber, D.

    1980-03-01

    The hardware and software required for the operation of the Doublet III Neutral Beam Injector System (NBIS) are described. Development and implementation of this Instrumentation and Control System was divided between the major participants - General Atomic Company and Lawrence Berkeley Laboratory. The subdivision of responsibilities and the coordination of the participants' activities are described with reference to hardware and software requirements in support of the entire system. Included are a description of the operators' consoles, the interlock system and the CAMAC system. One feature of the control software is source modeling. This feature includes feedback on a shot to shot basis and adaptive control. Adaptive control permits the computer system to automatically adjust parameters after a shot, and to control the system to automatically compensate for time varying NBIS components. The Neutral Beam Power Supply features power supply modeling, fiber optic transmission of analog signals and digital control of power supply power-up/interlocks.

  15. 18 CFR 45.9 - Automatic authorization of certain interlocking positions.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 18 Conservation of Power and Water Resources 1 2014-04-01 2014-04-01 false Automatic authorization of certain interlocking positions. 45.9 Section 45.9 Conservation of Power and Water Resources... indirectly, that percentage of each utility's stock (of whatever class or classes) which is required by...

  16. Enhanced Mechanical Performance of Bio-Inspired Hybrid Structures Utilising Topological Interlocking Geometry

    NASA Astrophysics Data System (ADS)

    Djumas, Lee; Molotnikov, Andrey; Simon, George P.; Estrin, Yuri

    2016-05-01

    Structural composites inspired by nacre have emerged as prime exemplars for guiding materials design of fracture-resistant, rigid hybrid materials. The intricate microstructure of nacre, which combines a hard majority phase with a small fraction of a soft phase, achieves superior mechanical properties compared to its constituents and has generated much interest. However, replicating the hierarchical microstructure of nacre is very challenging, not to mention improving it. In this article, we propose to alter the geometry of the hard building blocks by introducing the concept of topological interlocking. This design principle has previously been shown to provide an inherently brittle material with a remarkable flexural compliance. We now demonstrate that by combining the basic architecture of nacre with topological interlocking of discrete hard building blocks, hybrid materials of a new type can be produced. By adding a soft phase at the interfaces between topologically interlocked blocks in a single-build additive manufacturing process, further improvement of mechanical properties is achieved. The design of these fabricated hybrid structures has been guided by computational work elucidating the effect of various geometries. To our knowledge, this is the first reported study that combines the advantages of nacre-inspired structures with the benefits of topological interlocking.

  17. Custom sectional impression trays with interlocking type handle for microstomia patients.

    PubMed

    Fernandes, Aquaviva S; Mascarenhas, Kennedy; Aras, Meena A

    2009-01-01

    Making impressions in microstomia patients is often cumbersome. A modification of standard impression procedure is often necessary while treating such patients. This article describes the fabrication of a custom sectional impression tray with interlocking type of a handle for definitive impression procedures in a microstomia patient.

  18. 18 CFR 131.31 - FERC Form No. 561, Annual report of interlocking positions.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 18 Conservation of Power and Water Resources 1 2011-04-01 2011-04-01 false FERC Form No. 561, Annual report of interlocking positions. 131.31 Section 131.31 Conservation of Power and Water Resources... report is mandatory and is prescribed by Section 305(c)(1) of the Federal Power Act and 18 CFR...

  19. 18 CFR 45.9 - Automatic authorization of certain interlocking positions.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 18 Conservation of Power and Water Resources 1 2011-04-01 2011-04-01 false Automatic authorization... APPLICATION FOR AUTHORITY TO HOLD INTERLOCKING POSITIONS § 45.9 Automatic authorization of certain... owned, wholly or in part, by the other and, as its primary business, owns or operates transmission...

  20. 18 CFR 45.9 - Automatic authorization of certain interlocking positions.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Automatic authorization... APPLICATION FOR AUTHORITY TO HOLD INTERLOCKING POSITIONS § 45.9 Automatic authorization of certain... owned, wholly or in part, by the other and, as its primary business, owns or operates transmission...

  1. 78 FR 26849 - Model Specifications for Breath Alcohol Ignition Interlock Devices (BAIIDs)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-08

    ... (BAIIDs). (57 FR 11772.) Ignition interlocks are alcohol breath-testing devices installed in motor... (71 FR 8047), NHTSA published a request for comments, explaining that the agency intended to revise... October 6, 2010 (75 FR 61820), NHTSA published a separate notice containing proposed revisions to the...

  2. 46 CFR 111.70-7 - Remote control, interlock, and indicator circuits.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... overcurrent device is not more than 300 percent of the current-carrying capacity of the control, interlock, or... or setting of not more than 300 percent of the current-carrying capacity of the control, electrical... used for vital auxiliary circuits, a nameplate must be affixed to the vital auxiliary motor...

  3. 46 CFR 111.70-7 - Remote control, interlock, and indicator circuits.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... overcurrent device is not more than 300 percent of the current-carrying capacity of the control, interlock, or... or setting of not more than 300 percent of the current-carrying capacity of the control, electrical... used for vital auxiliary circuits, a nameplate must be affixed to the vital auxiliary motor...

  4. 46 CFR 111.70-7 - Remote control, interlock, and indicator circuits.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... overcurrent device is not more than 300 percent of the current-carrying capacity of the control, interlock, or... or setting of not more than 300 percent of the current-carrying capacity of the control, electrical... used for vital auxiliary circuits, a nameplate must be affixed to the vital auxiliary motor...

  5. 46 CFR 111.70-7 - Remote control, interlock, and indicator circuits.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... overcurrent device is not more than 300 percent of the current-carrying capacity of the control, interlock, or... or setting of not more than 300 percent of the current-carrying capacity of the control, electrical... used for vital auxiliary circuits, a nameplate must be affixed to the vital auxiliary motor...

  6. Enhanced Mechanical Performance of Bio-Inspired Hybrid Structures Utilising Topological Interlocking Geometry.

    PubMed

    Djumas, Lee; Molotnikov, Andrey; Simon, George P; Estrin, Yuri

    2016-01-01

    Structural composites inspired by nacre have emerged as prime exemplars for guiding materials design of fracture-resistant, rigid hybrid materials. The intricate microstructure of nacre, which combines a hard majority phase with a small fraction of a soft phase, achieves superior mechanical properties compared to its constituents and has generated much interest. However, replicating the hierarchical microstructure of nacre is very challenging, not to mention improving it. In this article, we propose to alter the geometry of the hard building blocks by introducing the concept of topological interlocking. This design principle has previously been shown to provide an inherently brittle material with a remarkable flexural compliance. We now demonstrate that by combining the basic architecture of nacre with topological interlocking of discrete hard building blocks, hybrid materials of a new type can be produced. By adding a soft phase at the interfaces between topologically interlocked blocks in a single-build additive manufacturing process, further improvement of mechanical properties is achieved. The design of these fabricated hybrid structures has been guided by computational work elucidating the effect of various geometries. To our knowledge, this is the first reported study that combines the advantages of nacre-inspired structures with the benefits of topological interlocking. PMID:27216277

  7. Enhanced Mechanical Performance of Bio-Inspired Hybrid Structures Utilising Topological Interlocking Geometry

    PubMed Central

    Djumas, Lee; Molotnikov, Andrey; Simon, George P.; Estrin, Yuri

    2016-01-01

    Structural composites inspired by nacre have emerged as prime exemplars for guiding materials design of fracture-resistant, rigid hybrid materials. The intricate microstructure of nacre, which combines a hard majority phase with a small fraction of a soft phase, achieves superior mechanical properties compared to its constituents and has generated much interest. However, replicating the hierarchical microstructure of nacre is very challenging, not to mention improving it. In this article, we propose to alter the geometry of the hard building blocks by introducing the concept of topological interlocking. This design principle has previously been shown to provide an inherently brittle material with a remarkable flexural compliance. We now demonstrate that by combining the basic architecture of nacre with topological interlocking of discrete hard building blocks, hybrid materials of a new type can be produced. By adding a soft phase at the interfaces between topologically interlocked blocks in a single-build additive manufacturing process, further improvement of mechanical properties is achieved. The design of these fabricated hybrid structures has been guided by computational work elucidating the effect of various geometries. To our knowledge, this is the first reported study that combines the advantages of nacre-inspired structures with the benefits of topological interlocking. PMID:27216277

  8. Three-component self-assembly of a series of triply interlocked Pd12 coordination prisms and their non-interlocked Pd6 analogues.

    PubMed

    Bar, Arun Kumar; Raghothama, Srinivasarao; Moon, Dohyun; Mukherjee, Partha Sarathi

    2012-03-12

    Template-assisted formation of multicomponent Pd(6) coordination prisms and formation of their self-templated triply interlocked Pd(12) analogues in the absence of an external template have been established in a single step through Pd-N/Pd-O coordination. Treatment of cis-[Pd(en)(NO(3))(2)] with K(3) tma and linear pillar 4,4'-bpy (en=ethylenediamine, H(3) tma=benzene-1,3,5-tricarboxylic acid, 4,4'-bpy=4,4'-bipyridine) gave intercalated coordination cage [{Pd(en)}(6)(bpy)(3)(tma)(2)](2)[NO(3)](12) (1) exclusively, whereas the same reaction in the presence of H(3) tma as an aromatic guest gave a H(3) tma-encapsulating non-interlocked discrete Pd(6) molecular prism [{Pd(en)}(6)(bpy)(3)(tma)(2)(H(3)tma)(2)][NO(3)](6) (2). Though the same reaction using cis-[Pd(NO(3))(2)(pn)] (pn=propane-1,2-diamine) instead of cis-[Pd(en)(NO(3))(2)] gave triply interlocked coordination cage [{Pd(pn)}(6)(bpy)(3)(tma)(2)](2)[NO(3)](12) (3) along with non-interlocked Pd(6) analogue [{Pd(pn)}(6)(bpy)(3) (tma)(2)](NO(3))(6) (3'), and the presence of H(3) tma as a guest gave H(3) tma-encapsulating molecular prism [{Pd(pn)}(6)(bpy)(3)(tma)(2)(H(3) tma)(2)][NO(3)](6) (4) exclusively. In solution, the amount of 3' decreases as the temperature is decreased, and in the solid state 3 is the sole product. Notably, an analogous reaction using the relatively short pillar pz (pz=pyrazine) instead of 4,4'-bpy gave triply interlocked coordination cage [{Pd(pn)}(6) (pz)(3)(tma)(2)](2)[NO(3)](12) (5) as the single product. Interestingly, the same reaction using slightly more bulky cis-[Pd(NO(3))(2)(tmen)] (tmen=N,N,N',N'-tetramethylethylene diamine) instead of cis-[Pd(NO(3))(2)(pn)] gave non-interlocked [{Pd(tmen)}(6)(pz)(3)(tma)(2)][NO(3)](6) (6) exclusively. Complexes 1, 3, and 5 represent the first examples of template-free triply interlocked molecular prisms obtained through multicomponent self-assembly. Formation of the complexes was supported by IR and multinuclear NMR ((1)H and (13)C) spectroscopy

  9. Effect of Frictions on the Ballistic Performance of a 3D Warp Interlock Fabric: Numerical Analysis

    NASA Astrophysics Data System (ADS)

    Ha-Minh, Cuong; Boussu, François; Kanit, Toufik; Crépin, David; Imad, Abdellatif

    2012-06-01

    3D interlock woven fabrics are promising materials to replace the 2D structures in the field of ballistic protection. The structural complexity of this material caused many difficulties in numerical modeling. This paper presents a new tool that permits to generate a geometry model of any woven fabric, then, mesh this model in shell or solid elements, and apply the mechanical properties of yarns to them. The tool shows many advantages over existing software. It is very handy in use with an organization of the functions in menu and using a graphic interface. It can describe correctly the geometry of all textile woven fabrics. With this tool, the orientation of the local axes of finite elements following the yarn direction facilitates defining the yarn mechanical properties in a numerical model. This tool can be largely applied because it is compatible with popular finite element codes such as Abaqus, Ansys, Radioss etc. Thanks to this tool, a finite element model was carried out to describe a ballistic impact on a 3D warp interlock Kevlar KM2® fabric. This work focuses on studying the effect of friction onto the ballistic impact behavior of this textile interlock structure. Results showed that the friction among yarns affects considerably on the impact behavior of this fabric. The effect of the friction between projectile and yarn is less important. The friction plays an important role in keeping the fabric structural stability during the impact event. This phenomenon explained why the projectile is easier to penetrate this 3D warp interlock fabric in the no-friction case. This result also indicates that the ballistic performance of the interlock woven fabrics can be improved by using fibers with great friction coefficients.

  10. The interlocking finger test in patients with Parkinson's disease and healthy subjects.

    PubMed

    Souza, Carolina Pinto; Oliveira, Guiomar Nascimento; Foss, Maria Paula; Tumas, Vitor

    2016-07-01

    The interlocking finger test (ILFT) is a bedside screening test in which the subject must imitate four bimanual finger gestures without symbolic meaning. We assessed the utility of the test in the cognitive evaluation of patients with Parkinson's disease (PD). We evaluated 88 healthy subjects and 101 patients with PD using a simplified motor score of the Unified Parkinson's Disease Rating Scale (UPDRS), Hoehn and Yahr and Schwab and England scales, Geriatric Depression Scale, Pfeffer Functional Activities Questionnaire, Clinical Dementia Rating, Mini-Mental State Examination, clock drawing test, digit span, word list battery of the Consortium to Establish a Registry for Alzheimer's Disease assessment, Frontal Assessment Battery, semantic verbal fluency test, and the ILFT. Diagnoses of mild cognitive impairment and dementia were made using the Movement Disorder Society diagnostic criteria. ILFT scores in healthy subjects correlated significantly with age (p=0.001) and only one healthy subject scored 2 in the test. ILFT scores were significantly lower in patients with PD and dementia (p=0.001) and significantly correlated with cognitive and functional tests, but not with depressive symptoms (p=0.607), Hoehn and Yahr scores (p=0.907), or Schwab and England scores (p=0.701). Twenty-five patients with dementia, three patients with mild cognitive impairment, and six patients with apparently normal cognition scored less than 3 in the ILFT. The area under the receiver operating characteristic curve for the ILFT to discriminate patients with dementia from those without it was 0.76 (cut-off score of 3/2: sensitivity of 61%, specificity of 0.85). In conclusion, the ILFT seems to be a useful bedside test to assess cognitive impairment in patients with PD.

  11. The interlocking finger test in patients with Parkinson's disease and healthy subjects.

    PubMed

    Souza, Carolina Pinto; Oliveira, Guiomar Nascimento; Foss, Maria Paula; Tumas, Vitor

    2016-07-01

    The interlocking finger test (ILFT) is a bedside screening test in which the subject must imitate four bimanual finger gestures without symbolic meaning. We assessed the utility of the test in the cognitive evaluation of patients with Parkinson's disease (PD). We evaluated 88 healthy subjects and 101 patients with PD using a simplified motor score of the Unified Parkinson's Disease Rating Scale (UPDRS), Hoehn and Yahr and Schwab and England scales, Geriatric Depression Scale, Pfeffer Functional Activities Questionnaire, Clinical Dementia Rating, Mini-Mental State Examination, clock drawing test, digit span, word list battery of the Consortium to Establish a Registry for Alzheimer's Disease assessment, Frontal Assessment Battery, semantic verbal fluency test, and the ILFT. Diagnoses of mild cognitive impairment and dementia were made using the Movement Disorder Society diagnostic criteria. ILFT scores in healthy subjects correlated significantly with age (p=0.001) and only one healthy subject scored 2 in the test. ILFT scores were significantly lower in patients with PD and dementia (p=0.001) and significantly correlated with cognitive and functional tests, but not with depressive symptoms (p=0.607), Hoehn and Yahr scores (p=0.907), or Schwab and England scores (p=0.701). Twenty-five patients with dementia, three patients with mild cognitive impairment, and six patients with apparently normal cognition scored less than 3 in the ILFT. The area under the receiver operating characteristic curve for the ILFT to discriminate patients with dementia from those without it was 0.76 (cut-off score of 3/2: sensitivity of 61%, specificity of 0.85). In conclusion, the ILFT seems to be a useful bedside test to assess cognitive impairment in patients with PD. PMID:26960261

  12. Effects of ignition interlock license restrictions on drivers with multiple alcohol offenses: a randomized trial in Maryland.

    PubMed Central

    Beck, K H; Rauch, W J; Baker, E A; Williams, A F

    1999-01-01

    OBJECTIVES: This investigation sought to test the effectiveness of a statewide ignition interlock license restriction program for drivers with multiple alcohol-related traffic offenses. METHODS: A total of 1387 multiple offenders eligible for license reinstatement were randomly assigned to participate in an ignition interlock program (experimental group) or in the conventional postlicensing treatment program (control group). The arrest rates of these 2 groups for alcohol traffic offenses were compared for 1 year during the ignition interlock license restriction program and for 1 year after unrestricted driving privileges were returned. RESULTS: Participation in the interlock program reduced offenders' risk of committing an alcohol traffic violation within the first year by about 65%. The alcohol traffic violation rate during the first year was significantly less for participants in the interlock program (2.4%) than for those in the control group (6.7%). However, there was no statistically significant difference between these groups in the second year, after the interlock license restriction was lifted. CONCLUSIONS: Ignition interlock license restriction programs are effective at reducing recidivism among drivers with multiple alcohol offenses, at least while the restriction is in effect. PMID:10553391

  13. Effectiveness of ignition interlocks for preventing alcohol-impaired driving and alcohol-related crashes: a Community Guide systematic review.

    PubMed

    Elder, Randy W; Voas, Robert; Beirness, Doug; Shults, Ruth A; Sleet, David A; Nichols, James L; Compton, Richard

    2011-03-01

    A systematic review of the literature to assess the effectiveness of ignition interlocks for reducing alcohol-impaired driving and alcohol-related crashes was conducted for the Guide to Community Preventive Services (Community Guide). Because one of the primary research issues of interest--the degree to which the installation of interlocks in offenders' vehicles reduces alcohol-impaired driving in comparison to alternative sanctions (primarily license suspension)--was addressed by a 2004 systematic review conducted for the Cochrane Collaboration, the current review incorporates that previous work and extends it to include more recent literature and crash outcomes. The body of evidence evaluated includes the 11 studies from the prior review, plus four more recent studies published through December 2007. The installation of ignition interlocks was associated consistently with large reductions in re-arrest rates for alcohol-impaired driving within both the earlier and later bodies of evidence. Following removal of interlocks, re-arrest rates reverted to levels similar to those for comparison groups. The limited available evidence from three studies that evaluated crash rates suggests that alcohol-related crashes decrease while interlocks are installed in vehicles. According to Community Guide rules of evidence, these findings provide strong evidence that interlocks, while they are in use in offenders' vehicles, are effective in reducing re-arrest rates. However, the potential for interlock programs to reduce alcohol-related crashes is currently limited by the small proportion of offenders who participate in the programs and the lack of a persistent beneficial effect once the interlock is removed. Suggestions for facilitating more widespread and sustained use of ignition interlocks are provided.

  14. What Is an Activity? Appropriating an Activity-Centric System

    NASA Astrophysics Data System (ADS)

    Yarosh, Svetlana; Matthews, Tara; Moran, Thomas P.; Smith, Barton

    Activity-Centric Computing (ACC) systems seek to address the fragmentation of office work across tools and documents by allowing users to organize work around the computational construct of an Activity. Defining and structuring appropriate Activities within a system poses a challenge for users that must be overcome in order to benefit from ACC support. We know little about how knowledge workers appropriate the Activity construct. To address this, we studied users’ appropriation of a production-quality ACC system, Lotus Activities, for everyday work by employees in a large corporation. We contribute to a better understanding of how users articulate their individual and collaborative work in the system by providing empirical evidence of their patterns of appropriation. We conclude by discussing how our findings can inform the design of other ACC systems for the workplace.

  15. The Effects of Interlocking a Universal Hip Cementless Stem on Implant Subsidence and Mechanical Properties of Cadaveric Canine Femora

    PubMed Central

    Buks, Yonathan; Stover, Susan M.; Garcia‐Nolen, Tanya C.

    2016-01-01

    Objective To determine if an interlocking bolt would limit subsidence of the biological fixation universal hip (BFX®) femoral stem under cyclic loading and enhance construct stiffness, yield, and failure properties. Study Design Ex vivo biomechanical study. Animals Cadaveric canine femora (10 pairs). Methods Paired femora implanted with a traditional stem or an interlocking stem (constructs) were cyclically loaded at walk, trot, and gallop loads while implant and bone motions were captured using kinematic markers and high‐speed video. Constructs were then loaded to failure to evaluate failure mechanical properties. Results Implant subsidence was greater (P = .037) for the traditional implant (4.19 mm) than the interlocking implant (0.78 mm) only after gallop cyclic loading, and cumulatively after walk, trot, and gallop cyclic loads (5.20 mm vs. 1.28 mm, P = .038). Yield and failure loads were greater (P = .029 and .002, respectively) for the interlocking stem construct (1155 N and 2337 N) than the traditional stem construct (816 N and 1405 N). Version angle change after cyclic loading was greater (P = .020) for the traditional implant (3.89 degrees) than for the interlocking implant (0.16 degrees), whereas stem varus displacement at failure was greater (P = .008) for the interlocking implant (1.5 degrees) than the traditional implant (0.17 degrees). Conclusion Addition of a stabilizing bolt enhanced construct stability and limited subsidence of a BFX® femoral stem. Use of the interlocking implant may decrease postoperative subsidence. However, in vivo effects of the interlocking bolt on osseointegration, bone remodeling, and stress shielding are unknown. PMID:26767439

  16. Interlocking directorates in Irish companies using a latent space model for bipartite networks.

    PubMed

    Friel, Nial; Rastelli, Riccardo; Wyse, Jason; Raftery, Adrian E

    2016-06-14

    We analyze the temporal bipartite network of the leading Irish companies and their directors from 2003 to 2013, encompassing the end of the Celtic Tiger boom and the ensuing financial crisis in 2008. We focus on the evolution of company interlocks, whereby a company director simultaneously sits on two or more boards. We develop a statistical model for this dataset by embedding the positions of companies and directors in a latent space. The temporal evolution of the network is modeled through three levels of Markovian dependence: one on the model parameters, one on the companies' latent positions, and one on the edges themselves. The model is estimated using Bayesian inference. Our analysis reveals that the level of interlocking, as measured by a contraction of the latent space, increased before and during the crisis, reaching a peak in 2009, and has generally stabilized since then. PMID:27247395

  17. Interlocking directorates in Irish companies using a latent space model for bipartite networks.

    PubMed

    Friel, Nial; Rastelli, Riccardo; Wyse, Jason; Raftery, Adrian E

    2016-06-14

    We analyze the temporal bipartite network of the leading Irish companies and their directors from 2003 to 2013, encompassing the end of the Celtic Tiger boom and the ensuing financial crisis in 2008. We focus on the evolution of company interlocks, whereby a company director simultaneously sits on two or more boards. We develop a statistical model for this dataset by embedding the positions of companies and directors in a latent space. The temporal evolution of the network is modeled through three levels of Markovian dependence: one on the model parameters, one on the companies' latent positions, and one on the edges themselves. The model is estimated using Bayesian inference. Our analysis reveals that the level of interlocking, as measured by a contraction of the latent space, increased before and during the crisis, reaching a peak in 2009, and has generally stabilized since then.

  18. Interlocking directorates in Irish companies using a latent space model for bipartite networks

    PubMed Central

    Friel, Nial; Rastelli, Riccardo; Wyse, Jason; Raftery, Adrian E.

    2016-01-01

    We analyze the temporal bipartite network of the leading Irish companies and their directors from 2003 to 2013, encompassing the end of the Celtic Tiger boom and the ensuing financial crisis in 2008. We focus on the evolution of company interlocks, whereby a company director simultaneously sits on two or more boards. We develop a statistical model for this dataset by embedding the positions of companies and directors in a latent space. The temporal evolution of the network is modeled through three levels of Markovian dependence: one on the model parameters, one on the companies’ latent positions, and one on the edges themselves. The model is estimated using Bayesian inference. Our analysis reveals that the level of interlocking, as measured by a contraction of the latent space, increased before and during the crisis, reaching a peak in 2009, and has generally stabilized since then. PMID:27247395

  19. An esthetic and hygienic approach to the use of intracoronal attachments as interlocks in fixed prosthodontics.

    PubMed

    Pissiotis, A L; Michalakis, K X

    1998-03-01

    This article describes a procedure that uses the Ney MS (Minimal Space) intracoronal attachment as an interlock in a pontic. This procedure overcomes the disadvantages associated with the use of the intracoronal attachments, which are (1) excessive tooth reduction often required to place the attachment within the contour of the crown; (2) compromised embrasures, which result in oral hygiene and periodontal problems; and (3) poor esthetics.

  20. Coalescence of 3-phenyl-propynenitrile on Cu(111) into interlocking pinwheel chains

    NASA Astrophysics Data System (ADS)

    Luo, Miaomiao; Lu, Wenhao; Kim, Daeho; Chu, Eric; Wyrick, Jon; Holzke, Connor; Salib, Daniel; Cohen, Kamelia D.; Cheng, Zhihai; Sun, Dezheng; Zhu, Yeming; Einstein, T. L.; Bartels, Ludwig

    2011-10-01

    3-phenyl-propynenitrile (PPN) adsorbs on Cu(111) in a hexagonal network of molecular trimers formed through intermolecular interaction of the cyano group of one molecule with the aromatic ring of its neighbor. Heptamers of trimers coalesce into interlocking pinwheel-shaped structures that, by percolating across islands of the original trimer coverage, create the appearance of gear chains. Density functional theory aids in identifying substrate stress associated with the chemisorption of PPN's acetylene group as the cause of this transition.

  1. Extended torsional tests of an interlocked bi-stem satellite boom

    NASA Technical Reports Server (NTRS)

    Abercrombie, R. A.

    1973-01-01

    The effect is reported of continued oscillations of a 1.27-cm interlocked bi-stem satellite boom. The test setup oscillated a boom continuously between set torque limits and periodically recorded its hysteresis characteristics. Results showed that repeated oscillations affected torsional characteristics and that torsional rigidity changed as a function of the number of cycles oscillated within certain torque limits. Torsional characteristics changes caused by repeated oscillations were retained.

  2. Data base management systems activities

    NASA Technical Reports Server (NTRS)

    1983-01-01

    The Data Management System-1100 is designed to operate in conjunction with the UNIVAC 1100 Series Operating System on any 1100 Series computer. DMS-1100 is divided into the following four major software components: (1) Data Definition Languages (DDL); (2) Data Management Routine (DMR); (3) Data Manipulation Languages (DML); and (4) Data Base Utilities (DBU). These software components are described in detail.

  3. A new fluoroscopy-free navigation device for distal interlocking screw placement.

    PubMed

    Lee, M-Y; Kuo, C H; Hung, S-S

    2008-01-01

    During the treatment of tibia fracture with interlocking nails, the most uncomfortable procedure is for an orthopaedic surgeon to find the location for the distal locking screws. In this study, a fluoroscopy-free non-contact navigation device was developed for the placement of distal locking screws in the tibia intramedullary nailing. This device utilizes a 3D digitization arm integrated with spatial coordinate registration module, graphical user interface module and sound-guided navigation module. The 3D digitization arm, a five-DOF passive robotic arm, was used to register the spatial coordinates of proximal and distal landmarks just before placement of the nail. The registered coordinates were then incorporated with the coordinates of the proximal landmarks after nail placement to calculate the coordinate transformation matrix. The transformed spatial coordinates of the distal screw holes were then computed in real time for interlocking nail navigation. A sound-guided navigation module was designed in which a sound with different tones and intermittence frequencies was produced, as the probe of the digitization arm navigates toward the location of distal screw holes. No intra-operative fluoroscopy was required. In vitro assessment was performed successfully with a donor bone, and a clinical case of a young male with tibia fracture was also carried out in the operating theatre. Operation time, distal screw insertion, total radiation time and accuracy of the distal interlocking screw placement were measured. The surgery was conducted under sterile conditions without complication, and the clinical course was smooth with prompt bone healing.

  4. Bio-inspired design of geometrically interlocked 3D printed joints

    NASA Astrophysics Data System (ADS)

    Kumar, S.; Oliva, Noel; Kumar's Lab Team

    The morphology of the adhesive-adherend interface significantly affects the mechanical behavior of adhesive joints. As seen in some biocomposites like human skull, or the nacre of some bivalve molluscs' shells, a geometrically interlocking architecture of interfaces creates toughening and strengthening mechanisms enhancing the mechanical properties of the joint. In an attempt to characterize this mechanical interlocking mechanism, this study is focused on computational and experimental investigation of a single-lap joint with a very simple geometrically interlocked interface design in which both adherends have a square waveform configuration of the joining surfaces. This square waveform configuration contains a positive and a negative rectangular teeth per cycle in such a way that the joint is symmetric about the mid-bondlength. Both physical tests performed on 3D printed prototypes of joints and computational results indicate that the joints with square waveform design have higher strength and damage tolerance than those of joints with flat interface. In order to identify an optimal design configuration of this interface, a systematic parametric study is conducted by varying the geometric and material properties of the non-flat interface. This work was supported by Lockheed Martin (Award No: 12NZZ1).

  5. Mechanical interlocking of engineered cartilage to an underlying polymeric substrate: towards a biohybrid tissue equivalent.

    PubMed

    Romito, Lisa; Ameer, Guillermo A

    2006-05-01

    This study investigates the feasibility of engineering a biohybrid cartilage equivalent (BCE) with the long-term goal of restoring the mechanical integrity and interfacial characteristics of severely damaged cartilage. The BCE depends on the successful adhesion, via mechanical interlocking, of a cartilage layer to a nondegradable composite scaffold or prosthesis. The model scaffold, consisting of a nonwoven mesh bonded to a solid core, was seeded with bovine articular chondrocytes. High molecular weight poly(L-lactic acid), which has a slow degradation time, was used to model the nondegradable polymer. Biochemical and histological analysis demonstrate that the BCE can support the growth of a cartilaginous matrix for at least 6 weeks in culture. Mechanical testing of the BCE showed cartilage adhesion strength increased from 19.27+/-1.62 to 43.79+/-3.88 kPa between 35 and 50 days in culture. Nonmechanically interlocked cartilage achieved less than 5% of this adhesion strength. For the first time, atomic force microscopy (AFM) was used to characterize surface topography of tissue-engineered cartilage. Surface roughness of constructs after 8 and 10 weeks ranged from 153 to 171 nm, falling within the range of native cartilage (100-600 nm). This study demonstrates the feasibility of creating a biohybrid cartilage equivalent by mechanically interlocking a cartilaginous layer to an underlying polymeric matrix.

  6. Modelling the evolution of a bi-partite network Peer referral in interlocking directorates*

    PubMed Central

    Edling, Christofer

    2010-01-01

    A central part of relational ties between social actors are constituted by shared affiliations and events. The action of joint participation reinforces personal ties between social actors as well as mutually shared values and norms that in turn perpetuate the patterns of social action that define groups. Therefore the study of bipartite networks is central to social science. Furthermore, the dynamics of these processes suggests that bipartite networks should not be considered static structures but rather be studied over time. In order to model the evolution of bipartite networks empirically we introduce a class of models and a Bayesian inference scheme that extends previous stochastic actor-oriented models for unimodal graphs. Contemporary research on interlocking directorates provides an area of research in which it seems reasonable to apply the model. Specifically, we address the question of how tie formation, i.e. director recruitment, contributes to the structural properties of the interlocking directorate network. For boards of directors on the Stockholm stock exchange we propose that a prolific mechanism in tie formation is that of peer referral. The results indicate that such a mechanism is present, generating multiple interlocks between boards. PMID:24944435

  7. Modelling the evolution of a bi-partite network Peer referral in interlocking directorates.

    PubMed

    Koskinen, Johan; Edling, Christofer

    2012-07-01

    A central part of relational ties between social actors are constituted by shared affiliations and events. The action of joint participation reinforces personal ties between social actors as well as mutually shared values and norms that in turn perpetuate the patterns of social action that define groups. Therefore the study of bipartite networks is central to social science. Furthermore, the dynamics of these processes suggests that bipartite networks should not be considered static structures but rather be studied over time. In order to model the evolution of bipartite networks empirically we introduce a class of models and a Bayesian inference scheme that extends previous stochastic actor-oriented models for unimodal graphs. Contemporary research on interlocking directorates provides an area of research in which it seems reasonable to apply the model. Specifically, we address the question of how tie formation, i.e. director recruitment, contributes to the structural properties of the interlocking directorate network. For boards of directors on the Stockholm stock exchange we propose that a prolific mechanism in tie formation is that of peer referral. The results indicate that such a mechanism is present, generating multiple interlocks between boards. PMID:24944435

  8. Orbiter active thermal control system description

    NASA Technical Reports Server (NTRS)

    Laubach, G. E.

    1975-01-01

    A brief description of the Orbiter Active Thermal Control System (ATCS) including (1) major functional requirements of heat load, temperature control and heat sink utilization, (2) the overall system arrangement, and (3) detailed description of the elements of the ATCS.

  9. Modular tokamak magnetic system

    DOEpatents

    Yang, Tien-Fang

    1988-01-01

    A modular tokamak system comprised of a plurality of interlocking moldules. Each module is comprised of a vacuum vessel section, a toroidal field coil, moldular saddle coils which generate a poloidal magnetic field and ohmic heating coils.

  10. Modeling Cytoskeletal Active Matter Systems

    NASA Astrophysics Data System (ADS)

    Blackwell, Robert

    Active networks of filamentous proteins and crosslinking motor proteins play a critical role in many important cellular processes. One of the most important microtubule-motor protein assemblies is the mitotic spindle, a self-organized active liquid-crystalline structure that forms during cell division and that ultimately separates chromosomes into two daughter cells. Although the spindle has been intensively studied for decades, the physical principles that govern its self-organization and function remain mysterious. To evolve a better understanding of spindle formation, structure, and dynamics, I investigate course-grained models of active liquid-crystalline networks composed of microtubules, modeled as hard spherocylinders, in diffusive equilibrium with a reservoir of active crosslinks, modeled as hookean springs that can adsorb to microtubules and and translocate at finite velocity along the microtubule axis. This model is investigated using a combination of brownian dynamics and kinetic monte carlo simulation. I have further refined this model to simulate spindle formation and kinetochore capture in the fission yeast S. pombe. I then make predictions for experimentally realizable perturbations in motor protein presence and function in S. pombe.

  11. An active tactile perception system

    NASA Astrophysics Data System (ADS)

    Petriu, E.; Greenspan, M.; Gelinas, F.; McMath, W. S.; Yeung, S. K.

    System development and application aspects are described for an experimental robotic system for the tactile perception of the global geometric profile of object surfaces which are larger than the dimensions of the tactile sensor. Local cutaneous information provided by a tactile sensor is integrated with the kinesthetic position parameters of a robot arm, resulting in a 3D geometric model of the tactile sensor pose on the explored object surface. Currently available tactile sensors provide poor information on the geometric profile of 3D object surfaces. In order to maximize the information available for 3D analysis, an instrumented passive compliant wrist was used to attach a pressure measuring tactile probe to the robot arm carrier. Data was collected by a noncompliant planar sensing array in direct contact with an object surface. Information recorded includes the following: positional and orientation data on the robot arm manipulator, passive compliance kinesthetic data as measured by the kinematics of the wrist, and cutaneous tactile data represented by the binary image of the sensors pose on the object. The dimensions of the sensor array were found to be a critical factor in system performance. Use of a large array results in fewer touch poses being required to explore an object's surface, on the other hand a large planar array will touch fewer and higher peaks thus missing surface detail. To improve performance, there is a need to design tactile sensors specifically for geometric profile measuring.

  12. Understanding Chemical Reaction Kinetics and Equilibrium with Interlocking Building Blocks

    ERIC Educational Resources Information Center

    Cloonan, Carrie A.; Nichol, Carolyn A.; Hutchinson, John S.

    2011-01-01

    Chemical reaction kinetics and equilibrium are essential core concepts of chemistry but are challenging topics for many students, both at the high school and undergraduate university level. Visualization at the molecular level is valuable to aid understanding of reaction kinetics and equilibrium. This activity provides a discovery-based method to…

  13. Centrally activated pipe snubbing system

    DOEpatents

    Cawley, William E.

    1985-01-01

    An electromechanical pipe snubbing system and an electromechanical pipe snubber. In the system, each pipe snubber, in a set of pipe snubbers, has an electromechanical mechanism to lock and unlock the snubber. A sensor, such as a seismometer, measures a quantity related to making a snubber locking or unlocking decision. A control device makes an electrical connection between a power supply and each snubber's electromechanical mechanism to simultaneously lock each snubber when the sensor measurement indicates a snubber locking condition. The control device breaks the connection to simultaneously unlock each snubber when the sensor measurement indicates a snubber unlocking condition. In the snubber, one end of the shaft slides within a bore in one end of a housing. The other end of the shaft is rotatably attached to a pipe; the other end of the housing is rotatively attached to a wall. The snubber's electromechanical mechanism locks the slidable end of the shaft to the housing and unlocks that end from the housing. The electromechanical mechanism permits remote testing and lockup status indication for each snubber.

  14. Flammable gas tank exhauster interlock (LFGTEI) computer software design description

    SciTech Connect

    Smith, S.O.; Irvitt, R.W., Fluor Daniel Hanford

    1997-02-21

    Modicon Compact Programmable Logic Controller (PLC). The device configuration integrates the isolation and current- carrying capacities of mechanical relays with the logic and programming sophistication of the PLC. This revised document provides descriptions of components and tasks involved in the PLC system for controlling and monitoring the FGTEI. All control functions required by the PLC, and how they are implemented, are described in detail.

  15. Active microrheology in active matter systems: Mobility, intermittency, and avalanches.

    PubMed

    Reichhardt, C; Reichhardt, C J Olson

    2015-03-01

    We examine the mobility and velocity fluctuations of a driven particle moving through an active matter bath of self-mobile disks for varied density or area coverage and varied activity. We show that the driven particle mobility can exhibit nonmonotonic behavior that is correlated with distinct changes in the spatiotemporal structures that arise in the active media. We demonstrate that the probe particle velocity distributions exhibit specific features in the different dynamic regimes and identify an activity-induced uniform crystallization that occurs for moderate activity levels and is distinct from the previously observed higher activity cluster phase. The velocity distribution in the cluster phase has telegraph noise characteristics produced when the probe particle moves alternately through high-mobility areas that are in the gas state and low-mobility areas that are in the dense phase. For higher densities and large activities, the system enters what we characterize as an active jamming regime. Here the probe particle moves in intermittent jumps or avalanches that have power-law-distributed sizes that are similar to the avalanche distributions observed for nonactive disk systems near the jamming transition.

  16. Active microrheology in active matter systems: Mobility, intermittency, and avalanches.

    PubMed

    Reichhardt, C; Reichhardt, C J Olson

    2015-03-01

    We examine the mobility and velocity fluctuations of a driven particle moving through an active matter bath of self-mobile disks for varied density or area coverage and varied activity. We show that the driven particle mobility can exhibit nonmonotonic behavior that is correlated with distinct changes in the spatiotemporal structures that arise in the active media. We demonstrate that the probe particle velocity distributions exhibit specific features in the different dynamic regimes and identify an activity-induced uniform crystallization that occurs for moderate activity levels and is distinct from the previously observed higher activity cluster phase. The velocity distribution in the cluster phase has telegraph noise characteristics produced when the probe particle moves alternately through high-mobility areas that are in the gas state and low-mobility areas that are in the dense phase. For higher densities and large activities, the system enters what we characterize as an active jamming regime. Here the probe particle moves in intermittent jumps or avalanches that have power-law-distributed sizes that are similar to the avalanche distributions observed for nonactive disk systems near the jamming transition. PMID:25871116

  17. Active microrheology in active matter systems: Mobility, intermittency, and avalanches

    NASA Astrophysics Data System (ADS)

    Reichhardt, C.; Reichhardt, C. J. Olson

    2015-03-01

    We examine the mobility and velocity fluctuations of a driven particle moving through an active matter bath of self-mobile disks for varied density or area coverage and varied activity. We show that the driven particle mobility can exhibit nonmonotonic behavior that is correlated with distinct changes in the spatiotemporal structures that arise in the active media. We demonstrate that the probe particle velocity distributions exhibit specific features in the different dynamic regimes and identify an activity-induced uniform crystallization that occurs for moderate activity levels and is distinct from the previously observed higher activity cluster phase. The velocity distribution in the cluster phase has telegraph noise characteristics produced when the probe particle moves alternately through high-mobility areas that are in the gas state and low-mobility areas that are in the dense phase. For higher densities and large activities, the system enters what we characterize as an active jamming regime. Here the probe particle moves in intermittent jumps or avalanches that have power-law-distributed sizes that are similar to the avalanche distributions observed for nonactive disk systems near the jamming transition.

  18. Laser bandwidth interlock capable of single pulse detection and rejection

    SciTech Connect

    Armstrong, James P; Telford, Steven James; Lanning, Rodney Kay; Bayramian, Andrew James

    2012-10-09

    A pulse of laser light is switched out of a pulse train and spatially dispersed into its constituent wavelengths. The pulse is collimated to a suitable size and then diffracted by high groove density multilayer dielectric gratings. This imparts a different angle to each individual wavelength so that, when brought to the far field with a lens, the colors have spread out in a linear arrangement. The distance between wavelengths (resolution) can be tailored for the specific laser and application by altering the number of times the beam strikes the diffraction gratings, the groove density of the gratings and the focal length of the lens. End portions of the linear arrangement are each directed to a respective detector, which converts the signal to a 1 if the level meets a set-point, and a 0 if the level does not. If both detectors produces a 1, then the pulse train is allowed to propagate into an optical system.

  19. Active impedance matching of complex structural systems

    NASA Technical Reports Server (NTRS)

    Macmartin, Douglas G.; Miller, David W.; Hall, Steven R.

    1991-01-01

    Viewgraphs on active impedance matching of complex structural systems are presented. Topics covered include: traveling wave model; dereverberated mobility model; computation of dereverberated mobility; control problem: optimal impedance matching; H2 optimal solution; statistical energy analysis (SEA) solution; experimental transfer functions; interferometer actuator and sensor locations; active strut configurations; power dual variables; dereverberation of complex structure; dereverberated transfer function; compensators; and relative power flow.

  20. PASS: Creating Physically Active School Systems

    ERIC Educational Resources Information Center

    Ciotto, Carol M.; Fede, Marybeth H.

    2014-01-01

    PASS, a Physically Active School System, is a program by which school districts and schools utilize opportunities for school-based physical activity that enhance overall fitness and cognition, which can be broken down into four integral parts consisting of connecting, communicating, collaborating, and cooperating. There needs to be an…

  1. Interlocking order parameter fluctuations in structural transitions between adsorbed polymer phases.

    PubMed

    Martins, Paulo H L; Bachmann, Michael

    2016-01-21

    By means of contact-density chain-growth simulations of a simple coarse-grained lattice model for a polymer grafted at a solid homogeneous substrate, we investigate the complementary behavior of the numbers of surface-monomer and monomer-monomer contacts under various solvent and thermal conditions. This pair of contact numbers represents an appropriate set of order parameters that enables the distinct discrimination of significantly different compact phases of polymer adsorption. Depending on the transition scenario, these order parameters can interlock in perfect cooperation. The analysis helps understand the transitions from compact filmlike adsorbed polymer conformations into layered morphologies and dissolved adsorbed structures, respectively, in more detail.

  2. The Subscapularis Interlocking Stitch for the Arthroscopic Treatment of Subscapularis Tendon Tears at the Shoulder

    PubMed Central

    Kircher, Jörn; Schwalba, Knut; Hedtmann, Achim

    2015-01-01

    Restoration of subscapularis function is essential for long-term maintenance of good clinical results for both traumatic and nontraumatic rotator cuff tears. The anatomic repair of partially and completely torn tendons from the footprint at the lesser tuberosity is the goal of surgical repair. The described technique, with a combination of an interlocking stitch and additional mattress sutures using a double-loaded suture anchor, provides reduction of the retracted tendon, sufficient pullout strength, and compression of the tendon to the footprint to facilitate healing. PMID:26900550

  3. Advanced Containment System

    DOEpatents

    Kostelnik, Kevin M.; Kawamura, Hideki; Richardson, John G.; Noda, Masaru

    2004-10-12

    An advanced containment system for containing buried waste and associated leachate. A trench is dug on either side of the zone of interest containing the buried waste so as to accommodate a micro tunnel boring machine. A series of small diameter tunnels are serially excavated underneath the buried waste. The tunnels are excavated by the micro tunnel boring machine at a consistent depth and are substantially parallel to each other. As tunneling progresses, steel casing sections are connected end to end in the excavated portion of the tunnel so that a steel tube is formed. Each casing section has complementary interlocking structure running its length that interlocks with complementary interlocking structure on the adjacent casing section. Thus, once the first tube is emplaced, placement of subsequent tubes is facilitated by the complementary interlocking structure on the adjacent, previously placed, casing sections.

  4. Advanced Containment System

    DOEpatents

    Kostelnik, Kevin M.; Kawamura, Hideki; Richardson, John G.; Noda, Masaru

    2005-05-24

    An advanced containment system for containing buried waste and associated leachate. A trench is dug on either side of the zone of interest containing the buried waste so as to accommodate a micro tunnel boring machine. A series of small diameter tunnels are serially excavated underneath the buried waste. The tunnels are excavated by the micro tunnel boring machine at a consistent depth and are substantially parallel to each other. As tunneling progresses, steel casing sections are connected end to end in the excavated portion of the tunnel so that a steel tube is formed. Each casing section has complementary interlocking structure running its length that interlocks with complementary interlocking structure on the adjacent casing section. Thus, once the first tube is emplaced, placement of subsequent tubes is facilitated by the complementary interlocking structure on the adjacent, previously placed, casing sections.

  5. Active imaging system with Faraday filter

    DOEpatents

    Snyder, J.J.

    1993-04-13

    An active imaging system has a low to medium powered laser transmitter and receiver wherein the receiver includes a Faraday filter with an ultranarrow optical bandpass and a bare (nonintensified) CCD camera. The laser is locked in the vicinity of the passband of the Faraday filter. The system has high sensitivity to the laser illumination while eliminating solar background.

  6. Active imaging system with Faraday filter

    DOEpatents

    Snyder, James J.

    1993-01-01

    An active imaging system has a low to medium powered laser transmitter and receiver wherein the receiver includes a Faraday filter with an ultranarrow optical bandpass and a bare (nonintensified) CCD camera. The laser is locked in the vicinity of the passband of the Faraday filter. The system has high sensitivity to the laser illumination while eliminating solar background.

  7. The VST active primary mirror support system

    NASA Astrophysics Data System (ADS)

    Schipani, Pietro; Capaccioli, Massimo; D'Orsi, Sergio; Ferragina, Luigi; Marty, Laurent; Molfese, Cesare; Perrotta, Francesco; De Paris, Giacinto; Fierro, Davide; Tomelleri, Raffaele; Rossettini, Pierfrancesco; Perina, Francesco; Recchia, Stefano; Magrin, Demetrio

    2010-07-01

    The 2.6-m primary mirror of the VST telescope is equipped with an active optics system in order to correct low-order aberrations, constantly monitoring the optical quality of the image and controlling the relative position and the shape of the optical elements. Periodically an image analyser calculates the deviation of the image from the best quality. VST is equipped with both a Shack-Hartmann in the probe system and a curvature sensor embedded in the OmegaCAM instrument. The telescope control software decomposes the deviation into single optical contributions and calculates the force correction that each active element has to perform to achieve the optimal quality. The set of correction forces, one for each axial actuator, is computed by the telescope central computer and transmitted to the local control unit of the primary mirror system for execution. The most important element of the VST active optics is the primary mirror, with its active support system located within the primary mirror cell structure. The primary mirror support system is composed by an axial and a lateral independent systems and includes an earthquake safety system. The system is described and the results of the qualification test campaign are discussed.

  8. Phase Transitions in Model Active Systems

    NASA Astrophysics Data System (ADS)

    Redner, Gabriel S.

    The amazing collective behaviors of active systems such as bird flocks, schools of fish, and colonies of microorganisms have long amazed scientists and laypeople alike. Understanding the physics of such systems is challenging due to their far-from-equilibrium dynamics, as well as the extreme diversity in their ingredients, relevant time- and length-scales, and emergent phenomenology. To make progress, one can categorize active systems by the symmetries of their constituent particles, as well as how activity is expressed. In this work, we examine two categories of active systems, and explore their phase behavior in detail. First, we study systems of self-propelled spherical particles moving in two dimensions. Despite the absence of an aligning interaction, this system displays complex emergent dynamics, including phase separation into a dense active solid and dilute gas. Using simulations and analytic modeling, we quantify the phase diagram and separation kinetics. We show that this nonequilibrium phase transition is analogous to an equilibrium vapor-liquid system, with binodal and spinodal curves and a critical point. We also characterize the dense active solid phase, a unique material which exhibits the structural signatures of a crystalline solid near the crystal-hexatic transition point, as well as anomalous dynamics including superdiffusive motion on intermediate timescales. We also explore the role of interparticle attraction in this system. We demonstrate that attraction drastically changes the phase diagram, which contains two distinct phase-separated regions and is reentrant as a function of propulsion speed. We interpret this complex situation with a simple kinetic model, which builds from the observed microdynamics of individual particles to a full description of the macroscopic phase behavior. We also study active nematics, liquid crystals driven out of equilibrium by energy-dissipating active stresses. The equilibrium nematic state is unstable in these

  9. Active containment systems incorporating modified pillared clays

    SciTech Connect

    Lundie, P. |; McLeod, N.

    1997-12-31

    The application of treatment technologies in active containment systems provides a more advanced and effective method for the remediation of contaminated sites. These treatment technologies can be applied in permeable reactive walls and/or funnel and gate systems. The application of modified pillared clays in active containment systems provides a mechanism for producing permeable reactive walls with versatile properties. These pillared clays are suitably modified to incorporate reactive intercalatants capable of reacting with both a broad range of organic pollutants of varying molecular size, polarity and reactivity. Heavy metals can be removed from contaminated water by conventional ion-exchange and other reactive processes within the clay structure. Complex contamination problems can be addressed by the application of more than one modified clay on a site specific basis. This paper briefly describes the active containment system and the structure/chemistry of the modified pillared clay technology, illustrating potential applications of the in-situ treatment process for contaminated site remediation.

  10. A robust activity marking system for exploring active neuronal ensembles

    PubMed Central

    Sørensen, Andreas T; Cooper, Yonatan A; Baratta, Michael V; Weng, Feng-Ju; Zhang, Yuxiang; Ramamoorthi, Kartik; Fropf, Robin; LaVerriere, Emily; Xue, Jian; Young, Andrew; Schneider, Colleen; Gøtzsche, Casper René; Hemberg, Martin; Yin, Jerry CP; Maier, Steven F; Lin, Yingxi

    2016-01-01

    Understanding how the brain captures transient experience and converts it into long lasting changes in neural circuits requires the identification and investigation of the specific ensembles of neurons that are responsible for the encoding of each experience. We have developed a Robust Activity Marking (RAM) system that allows for the identification and interrogation of ensembles of neurons. The RAM system provides unprecedented high sensitivity and selectivity through the use of an optimized synthetic activity-regulated promoter that is strongly induced by neuronal activity and a modified Tet-Off system that achieves improved temporal control. Due to its compact design, RAM can be packaged into a single adeno-associated virus (AAV), providing great versatility and ease of use, including application to mice, rats, flies, and potentially many other species. Cre-dependent RAM, CRAM, allows for the study of active ensembles of a specific cell type and anatomical connectivity, further expanding the RAM system’s versatility. DOI: http://dx.doi.org/10.7554/eLife.13918.001 PMID:27661450

  11. Aging assessment for active fire protection systems

    SciTech Connect

    Ross, S.B.; Nowlen, S.P.; Tanaka, T.

    1995-06-01

    This study assessed the impact of aging on the performance and reliability of active fire protection systems including both fixed fire suppression and fixed fire detection systems. The experience base shows that most nuclear power plants have an aggressive maintenance and testing program and are finding degraded fire protection system components before a failure occurs. Also, from the data reviewed it is clear that the risk impact of fire protection system aging is low. However, it is assumed that a more aggressive maintenance and testing program involving preventive diagnostics may reduce the risk impact even further.

  12. Active Displacement Control of Active Magnetic Bearing System

    NASA Astrophysics Data System (ADS)

    Kertész, Milan; Kozakovič, Radko; Magdolen, Luboš; Masaryk, Michal

    2014-12-01

    The worldwide energy production nowadays is over 3400 GW while storage systems have a capacity of only 90 GW [1]. There is a good solution for additional storage capacity in flywheel energy storage systems (FES). The main advantage of FES is its relatively high efficiency especially with using the active magnetic bearing system. Therefore there exist good reasons for appropriate simulations and for creating a suitable magneto-structural control system. The magnetic bearing, including actuation, is simulated in the ANSYS parametric design language (APDL). APDL is used to create the loops of transient simulations where boundary conditions (BC) are updated based upon a "gap sensor" which controls the nodal position values of the centroid of the shaft and the current density inputs onto the copper windings.

  13. Gamma Band Activity in the Reticular Activating System

    PubMed Central

    Urbano, Francisco J.; Kezunovic, Nebojsa; Hyde, James; Simon, Christen; Beck, Paige; Garcia-Rill, Edgar

    2012-01-01

    This review considers recent evidence showing that cells in three regions of the reticular activating system (RAS) exhibit gamma band activity, and describes the mechanisms behind such manifestation. Specifically, we discuss how cells in the mesopontine pedunculopontine nucleus (PPN), intralaminar parafascicular nucleus (Pf), and pontine subcoeruleus nucleus dorsalis (SubCD) all fire in the beta/gamma band range when maximally activated, but no higher. The mechanisms behind this ceiling effect have been recently elucidated. We describe recent findings showing that every cell in the PPN have high-threshold, voltage-dependent P/Q-type calcium channels that are essential, while N-type calcium channels are permissive, to gamma band activity. Every cell in the Pf also showed that P/Q-type and N-type calcium channels are responsible for this activity. On the other hand, every SubCD cell exhibited sodium-dependent subthreshold oscillations. A novel mechanism for sleep–wake control based on well-known transmitter interactions, electrical coupling, and gamma band activity is described. The data presented here on inherent gamma band activity demonstrates the global nature of sleep–wake oscillation that is orchestrated by brainstem–thalamic mechanism, and questions the undue importance given to the hypothalamus for regulation of sleep–wakefulness. The discovery of gamma band activity in the RAS follows recent reports of such activity in other subcortical regions like the hippocampus and cerebellum. We hypothesize that, rather than participating in the temporal binding of sensory events as seen in the cortex, gamma band activity manifested in the RAS may help stabilize coherence related to arousal, providing a stable activation state during waking and paradoxical sleep. Most of our thoughts and actions are driven by pre-conscious processes. We speculate that continuous sensory input will induce gamma band activity in the RAS that could participate in the processes of

  14. Traveling and resting crystals in active systems.

    PubMed

    Menzel, Andreas M; Löwen, Hartmut

    2013-02-01

    A microscopic field theory for crystallization in active systems is proposed which unifies the phase-field-crystal model of freezing with the Toner-Tu theory for self-propelled particles. A wealth of different active crystalline states are predicted and characterized. In particular, for increasing strength of self-propulsion, a transition from a resting crystal to a traveling crystalline state is found where the particles migrate collectively while keeping their crystalline order. Our predictions, which are verifiable in experiments and in particle-resolved computer simulations, provide a starting point for the design of new active materials.

  15. Distributed control system for active mirrors

    NASA Astrophysics Data System (ADS)

    Rodriguez-Ramos, Luis F.; Williams, Mark R.; Castro, Javier; Cruz, A.; Gonzalez, Juan C.; Mack, Brian; Martin, Carlos; Pescador, German; Sanchez, Vicente; Sosa, Nicolas A.

    1994-06-01

    This paper presents the IAC (Instituto de Astrofisica de Canaries, Spain) proposal of a distributed control system intended for the active support of a 8 m mirror. The system incorporates a large number of compact `smart' force actuators, six force definers, and a mirror support computer (MSC) for interfacing with the telescope control system and for general housekeeping. We propose the use of a network for the interconnection of the actuators, definers and the MSC, which will minimize the physical complexity of the interface between the mirror support system and the MSC. The force actuator control electronics are described in detail, as is the system software architecture of the actuator and the MSC. As the network is a key point for the system, we also detail the evaluation of three candidates, before electing the CAN bus.

  16. Supporting Classroom Activities with the BSUL System

    ERIC Educational Resources Information Center

    Ogata, Hiroaki; Saito, Nobuji A.; Paredes J., Rosa G.; San Martin, Gerardo Ayala; Yano, Yoneo

    2008-01-01

    This paper presents the integration of ubiquitous computing systems into classroom settings, in order to provide basic support for classrooms and field activities. We have developed web application components using Java technology and configured a classroom with wireless network access and a web camera for our purposes. In this classroom, the…

  17. Computer-automated neutron activation analysis system

    SciTech Connect

    Minor, M.M.; Garcia, S.R.

    1983-01-01

    An automated delayed neutron counting and instrumental neutron activation analysis system has been developed at Los Alamos National Laboratory's Omega West Reactor (OWR) to analyze samples for uranium and 31 additional elements with a maximum throughput of 400 samples per day. 5 references.

  18. Actively Controlled Magnetic Vibration-Isolation System

    NASA Technical Reports Server (NTRS)

    Grodsinky, Carlos M.; Logsdon, Kirk A.; Wbomski, Joseph F.; Brown, Gerald V.

    1993-01-01

    Prototype magnetic suspension system with active control isolates object from vibrations in all six degrees of freedom at frequencies as low as 0.01 Hz. Designed specifically to protect instruments aboard spacecraft by suppressing vibrations to microgravity levels; basic control approach used for such terrestrial uses as suppression of shocks and other vibrations in trucks and railroad cars.

  19. Design of nutrient removal activated sludge systems.

    PubMed

    Manga, J; Ferrer, J; Seco, A; Garcia-Usach, F

    2003-01-01

    A mechanistic mathematical model for nutrient and organic matter removal was used to describe the behavior of a nitrification denitrification enhanced biological phosphorus removal (NDEBPR) system. This model was implemented in a user-friendly software DESASS (design and simulation of activated sludge systems). A 484-L pilot plant was operated to verify the model results. The pilot plant was operated for three years over three different sludge ages. The validity of the model was confirmed with data from the pilot plant. Also, the utility of DESASS as a valuable tool for designing NDEBPR systems was confirmed.

  20. Design of nutrient removal activated sludge systems.

    PubMed

    Manga, J; Ferrer, J; Seco, A; Garcia-Usach, F

    2003-01-01

    A mechanistic mathematical model for nutrient and organic matter removal was used to describe the behavior of a nitrification denitrification enhanced biological phosphorus removal (NDEBPR) system. This model was implemented in a user-friendly software DESASS (design and simulation of activated sludge systems). A 484-L pilot plant was operated to verify the model results. The pilot plant was operated for three years over three different sludge ages. The validity of the model was confirmed with data from the pilot plant. Also, the utility of DESASS as a valuable tool for designing NDEBPR systems was confirmed. PMID:12906279

  1. Institutional Conflict of Interest: The Role of Interlocking Directorates in the Scientific Relationships between Universities and the Corporate Sector

    ERIC Educational Resources Information Center

    Slaughter, Sheila; Thomas, Scott L.; Johnson, David R.; Barringer, Sondra N.

    2014-01-01

    We examined the potential for institutional conflict of interest between the 26 private universities belonging to the Association of American Universities and the corporations to which they are tied through their boards of trustees. We were interested in the degree to which interlocks may have tightened over three points across an 11-year period…

  2. Interlocking Toy Building Blocks as Hands-On Learning Modules for Blind and Visually Impaired Chemistry Students

    ERIC Educational Resources Information Center

    Melaku, Samuel; Schreck, James O.; Griffin, Kameron; Dabke, Rajeev B.

    2016-01-01

    Interlocking toy building blocks (e.g., Lego) as chemistry learning modules for blind and visually impaired (BVI) students in high school and undergraduate introductory or general chemistry courses are presented. Building blocks were assembled on a baseplate to depict the relative changes in the periodic properties of elements. Modules depicting…

  3. Green Bank Telescope active surface system

    NASA Astrophysics Data System (ADS)

    Lacasse, Richard J.

    1998-05-01

    During the design phase of the Green Bank Telescope (GBT), various means of providing an accurate surface on a large aperture paraboloid, were considered. Automated jacks supporting the primary reflector were selected as the appropriate technology since they promised greater performance and potentially lower costs than a homologous or carbon fiber design, and had certain advantages over an active secondary. The design of the active surface has presented many challenges. Since the actuators are mounted on a tipping structure, it was required that they support a significant side-load. Such devices were not readily available commercially so they had to be developed. Additional actuator requirements include low backlash, repeatable positioning, and an operational life of at least 230 years. Similarly, no control system capable of controlling the 2209 actuators was commercially available. Again a prime requirement was reliability. Maintaining was also a very important consideration. The system architecture is tree-like. An active surface 'master-computer' controls interaction with the telescope control system, and controls ancillary equipment such as power supplies and temperature monitors. Two slave computers interface with the master- computer, and each closes approximately 1100 position loops. For simplicity, the servo is an 'on/off' type, yet achieves a positioning resolution of 25 microns. Each slave computer interfaces with 4 VME I/O cards, which in turn communicate with 140 control modules. The control modules read out the positions of the actuators every 0.1 sec and control the actuators' DC motors. Initial control of the active surface will be based on an elevation dependant structural model. Later, the model will be improved by holographic observations.Surface accuracy will be improved further by using laser ranging system which will actively measure the surface figure. Several tests have been conducted to assure that the system will perform as desired when

  4. Active gated imaging in driver assistance system

    NASA Astrophysics Data System (ADS)

    Grauer, Yoav

    2014-04-01

    In this paper, we shall present the active gated imaging system (AGIS) in relation to the automotive field. AGIS is based on a fast-gated camera and pulsed illuminator, synchronized in the time domain to record images of a certain range of interest. A dedicated gated CMOS imager sensor and near infra-red (NIR) pulsed laser illuminator, is presented in this paper to provide active gated technology. In recent years, we have developed these key components and learned the system parameters, which are most beneficial to nighttime (in all weather conditions) driving in terms of field of view, illumination profile, resolution, and processing power. We shall present our approach of a camera-based advanced driver assistance systems (ADAS) named BrightEye™, which makes use of the AGIS technology in the automotive field.

  5. Significantly improving oxygen barrier properties of polylactide via constructing parallel-aligned shish-kebab-like crystals with well-interlocked boundaries.

    PubMed

    Bai, Hongwei; Huang, Chunmei; Xiu, Hao; Zhang, Qin; Deng, Hua; Wang, Ke; Chen, Feng; Fu, Qiang

    2014-04-14

    Recently, some attempts have been made to enhance the gas barrier properties of semicrystalline polymers by precisely controlling the arrangement of their impermeable crystalline lamellae. However, it is still a great challenge to achieve regular arrangement of the lamellae along the direction perpendicular to the gas diffusion path, especially using conventional polymer processing technologies. This work presents a novel and simple strategy to dramatically improve oxygen barrier performance of biobased and biodegradable polylactide (PLA) through constructing parallel-aligned shish-kebab-like crystals with well-interlocked boundaries with the aid of a highly active nucleating agent. The nucleating agent was introduced into PLA by melting compounding and the sheet-like specimens were fabricated by compression molding. We demonstrate that the fibrillar nucleating agent dispersed in PLA melt can serve as shish to induce the change of crystallization habit of PLA from isotopic spherulitic crystals to unique shish-kebab-like crystals and the shear flow in the compression molding can induce the highly ordered alignment of the nucleating agent fibrils as well as the subsequent shish-kebab-like crystals along the direction parallel to the sheet surface. More importantly, the growing lamellae are found to interpenetrate and tightly interlock with each other at the boundary regions of the shish-kebab-like crystals in the later stage of the crystallization, forming a densely packed nanobrick wall structure to prevent gas molecules from permeating through the crystals and thus imparting the PLA sheets with unprecedentedly low oxygen permeability. This work provides not only a successful example of preparing semicrystalline polymer with super gas barrier properties by tailoring crystal superstructure but also a promising route to rapidly fabricate high-performance food packaging materials via industrially meaningful melt processing.

  6. Pervious Pavement System Evaluation-Poster

    EPA Science Inventory

    Pervious pavement is a low impact development stormwater control. The Environmental Protection Agency's Urban Watershed Management Branch is evaluating interlocking concrete pavingstone pervious pavement systems. The pavingstones themselves are impermeable, but the spaces between...

  7. Modular System to Enable Extravehicular Activity

    NASA Technical Reports Server (NTRS)

    Sargusingh, Miriam J.

    2012-01-01

    The ability to perform extravehicular activity (EVA), both human and robotic, has been identified as a key component to space missions to support such operations as assembly and maintenance of space systems (e.g. construction and maintenance of the International Space Station), and unscheduled activities to repair an element of the transportation and habitation systems that can only be accessed externally and via unpressurized areas. In order to make human transportation beyond lower Earth orbit (LEO) practical, efficiencies must be incorporated into the integrated transportation systems to reduce system mass and operational complexity. Affordability is also a key aspect to be considered in space system development; this could be achieved through commonality, modularity and component reuse. Another key aspect identified for the EVA system was the ability to produce flight worthy hardware quickly to support early missions and near Earth technology demonstrations. This paper details a conceptual architecture for a modular EVA system that would meet these stated needs for EVA capability that is affordable, and that could be produced relatively quickly. Operational concepts were developed to elaborate on the defined needs, and to define the key capabilities, operational and design constraints, and general timelines. The operational concept lead to a high level design concept for a module that interfaces with various space transportation elements and contains the hardware and systems required to support human and telerobotic EVA; the module would not be self-propelled and would rely on an interfacing element for consumable resources. The conceptual architecture was then compared to EVA Systems used in the Space Shuttle Orbiter, on the International Space Station to develop high level design concepts that incorporate opportunities for cost savings through hardware reuse, and quick production through the use of existing technologies and hardware designs. An upgrade option

  8. The community structure of the European network of interlocking directorates 2005-2010.

    PubMed

    Heemskerk, Eelke M; Daolio, Fabio; Tomassini, Marco

    2013-01-01

    The boards of directors at large European companies overlap with each other to a sizable extent both within and across national borders. This could have important economic, political and management consequences. In this work we study in detail the topological structure of the networks that arise from this phenomenon. Using a comprehensive information database, we reconstruct the implicit networks of shared directorates among the top 300 European firms in 2005 and 2010, and suggest a number of novel ways to explore the trans-nationality of such business elite networks. Powerful community detection heuristics indicate that geography still plays an important role: there exist clear communities and they have a distinct national character. Nonetheless, from 2005 to 2010 we observe a densification of the boards interlocks network and a larger transnational orientation in its communities. Together with central actors and assortativity analyses, we provide statistical evidence that, at the level of corporate governance, Europe is getting closer. PMID:23894318

  9. Tibiotarsal fracture repair in a bald eagle (Haliaeetus leucocephalus) using an interlocking nail.

    PubMed

    Hollamby, Simon; Dejardin, Loic M; Sikarskie, James G; Haeger, Jennifer

    2004-03-01

    A 14-yr-old, 5.13-kg bald eagle (Haliaeetus leucocephalus) was hit by a car and presented to the Michigan State University Small Animal Clinic with an open, grade II, transverse, midshaft, Winquist-Hansen type-II-comminuted left tibiotarsal fracture. The fracture was reduced and fixation established with a 4.7-mm-diameter, 112-mm-long, four-hole veterinary intramedullary interlocking nail maintained in position by single 2-mm transcortical screws placed in the main proximal and distal fragments. The bird was weight bearing on the bandaged limb 48 hr postoperatively. Radiographs obtained 4 wk postoperatively revealed bridging callus over three of four cortices. The bird was released after 5 mo of rehabilitation.

  10. Structural effects of three-dimensional angle-interlock woven composite undergoing bending cyclic loading

    NASA Astrophysics Data System (ADS)

    Jin, LiMin; Yao, Yao; Yu, YiMin; Rotich, Gideon; Sun, BaoZhong; Gu, BoHong

    2014-03-01

    This paper reports the structural effects of three-dimensional (3-D) angle-interlock woven composite (3DAWC) undergoing three-point bending cyclic loading from experimental and finite element analysis (FEA) approaches. In experiment, the fatigue tests were conducted to measure the bending deflection and to observe the damage morphologies. By the FEA approach, a micro-structural unit-cell model of the 3DAWC was established at the yarn level to simulate the fatigue damage. The stress degradation at the loading condition of constant deformation amplitude was calculated to show the degradation of mechanical properties. In addition, the stress distribution, fatigue damage evolution and critical damage regions were also obtained to qualitatively reveal the structural effects and damage mechanisms of the 3DAWC subjected to three-point bending cyclic loading.

  11. Effect of new adhesion promoter and mechanical interlocking on bonding strength in metal-polymer composites

    NASA Astrophysics Data System (ADS)

    Schuberth, A.; Göring, M.; Lindner, T.; Töberling, G.; Puschmann, M.; Riedel, F.; Scharf, I.; Schreiter, K.; Spange, S.; Lampke, T.

    2016-03-01

    There are various opportunities to improve the adhesion between polymer and metal in metal-plastic composites. The addition of a bonding agent which reacts with both joining components at the interfaces of the composite can enhance the bonding strength. An alternative method for the adjustment of interfaces in metal-plastic composites is the specific surface structuring of the joining partners in order to exploit the mechanical interlock effect. In this study the potential of using an adhesion promoter based on twin polymerization for metal-plastic composites in combination with different methods of mechanical surface treatment is evaluated by using the tensile shear test. It is shown that the new adhesion promoter has a major effect when applied on smooth metal surfaces. A combination of both mechanical and chemical surface treatment of the metal part is mostly just as effective as the application of only one of these surface treatment methods.

  12. The Community Structure of the European Network of Interlocking Directorates 2005–2010

    PubMed Central

    Heemskerk, Eelke M.; Daolio, Fabio; Tomassini, Marco

    2013-01-01

    The boards of directors at large European companies overlap with each other to a sizable extent both within and across national borders. This could have important economic, political and management consequences. In this work we study in detail the topological structure of the networks that arise from this phenomenon. Using a comprehensive information database, we reconstruct the implicit networks of shared directorates among the top 300 European firms in 2005 and 2010, and suggest a number of novel ways to explore the trans-nationality of such business elite networks. Powerful community detection heuristics indicate that geography still plays an important role: there exist clear communities and they have a distinct national character. Nonetheless, from 2005 to 2010 we observe a densification of the boards interlocks network and a larger transnational orientation in its communities. Together with central actors and assortativity analyses, we provide statistical evidence that, at the level of corporate governance, Europe is getting closer. PMID:23894318

  13. Optically Active Porphyrin and Phthalocyanine Systems.

    PubMed

    Lu, Hua; Kobayashi, Nagao

    2016-05-25

    This review highlights and summarizes various optically active porphyrin and phthalocyanine molecules prepared using a wide range of structural modification methods to improve the design of novel structures and their applications. The induced chirality of some illustrative achiral bis-porphyrins with a chiral guest molecule is introduced because these systems are ideal for the identification and separation of chiral biologically active substrates. In addition, the relationship between CD signal and the absolute configuration of the molecule is analyzed through an analysis of the results of molecular modeling calculations. Possible future research directions are also discussed. PMID:27186902

  14. Fluid-Structure Interactions for Micro-interlocked Regions of the Cement-Bone Interface

    PubMed Central

    Mann, Kenneth A.; Miller, Mark A

    2013-01-01

    Experimental tests and computational modeling were used to explore the fluid dynamics at the trabeculae-cement interlock regions found in the tibial component of total knee replacements (TKR). A cement-bone construct of the proximal tibia was created to simulate the immediate post-operative condition. Gap distributions along nine trabeculae-cement regions ranged from 0 to 50.4µm (mean=12 µm). Micro-motions ranged from 0.56 to 4.7µm with a 1 MPa compressive load to the cement. Fluid-structure analysis between trabeculae and cement used idealized models with parametric evaluation of loading direction, gap closing fraction, gap thickness, loading frequency, and fluid viscosity. The highest fluid shear stresses (926 Pa) along the trabecular surface were found for conditions with very thin gaps and large closing fractions; much larger than reported physiological levels (~ 1–5 Pa). A second fluid-structure model was created with provision for bone resorption using a constitutive model with resorption velocity proportional to fluid shear rate. A lower cut-off was used, below which bone resorption would not occur (50 1/s). Results showed that there was initially high shear rates (> 1000 1/s) that diminished after initial trabecular resorption. Resorption continued in high shear rate regions, resulting in a final shape with bone left deep in the cement layer, and is consistent with morphology found in postmortem retrievals. Small gaps between the trabecular surface and cement in the immediate post-operative state, produce fluid flow conditions that appear to be supra-physiologic; these may cause fluid induced lysis of trabeculae in the micro-interlock regions. PMID:23480611

  15. Interlocking of chelae is a key factor for dominance hierarchy formation in crayfish.

    PubMed

    Ueno, Ryusuke; Nagayama, Toshiki

    2012-08-15

    We characterized the role of chelae during agonistic encounters of the crayfish Procambarus clarkii. Physical asymmetries in body length, body mass and chelae size were directly related to dominance hierarchy formation. More than 80% of winning crayfish had longer body and chelae lengths, and winners were usually heavier in body mass, even if their differences were less than 3% compared with losing opponents. In mismatched pairings, large crayfish with short chelae were beaten by small crayfish with large chelae. Three physical elements of body length, body mass and chelae length equally affected the outcome of agonistic bouts. Chelae restriction, in which chelae were tightly closed using rubber bands, affected the outcome of agonistic bouts between large and small crayfish. Before chelae restriction, large crayfish won in all pairings. Following chelae restriction for at least 30 days from the first encounters, the winning rate of large crayfish that were previous winners decreased significantly in the second encounters against the same opponents that were previous losers. The handicap of chelae restriction significantly prolonged the time to formation of the winner-loser relationship. Individual fights escalated during agonistic bouts between large crayfish with one chela restricted and small crayfish with intact chelae, whereas the number of fights increased but the duration of individual fights did not increase in large crayfish with both chelae restricted. Furthermore, when the chelae of both large and small crayfish were disabled, the dominance order was frequently not formed during 30 min of agonistic bouts. Preventing chelae from interlocking prevented escalation of agonistic bouts. We show that interlocking of chelae acted as a key factor for the formation of dominance hierarchy.

  16. Control Systems Cyber Security Standards Support Activities

    SciTech Connect

    Robert Evans

    2009-01-01

    The Department of Homeland Security’s Control Systems Security Program (CSSP) is working with industry to secure critical infrastructure sectors from cyber intrusions that could compromise control systems. This document describes CSSP’s current activities with industry organizations in developing cyber security standards for control systems. In addition, it summarizes the standards work being conducted by organizations within the sector and provides a brief listing of sector meetings and conferences that might be of interest for each sector. Control systems cyber security standards are part of a rapidly changing environment. The participation of CSSP in the development effort for these standards has provided consistency in the technical content of the standards while ensuring that information developed by CSSP is included.

  17. Advanced extravehicular activity systems requirements definition study

    NASA Technical Reports Server (NTRS)

    1988-01-01

    A study to define the requirements for advanced extravehicular activities (AEVA) was conducted. The purpose of the study was to develop an understanding of the EVA technology requirements and to map a pathway from existing or developing technologies to an AEVA system capable of supporting long-duration missions on the lunar surface. The parameters of an AEVA system which must sustain the crewmembers and permit productive work for long periods in the lunar environment were examined. A design reference mission (DRM) was formulated and used as a tool to develop and analyze the EVA systems technology aspects. Many operational and infrastructure design issues which have a significant influence on the EVA system are identified.

  18. Active State Model for Autonomous Systems

    NASA Technical Reports Server (NTRS)

    Park, Han; Chien, Steve; Zak, Michail; James, Mark; Mackey, Ryan; Fisher, Forest

    2003-01-01

    The concept of the active state model (ASM) is an architecture for the development of advanced integrated fault-detection-and-isolation (FDI) systems for robotic land vehicles, pilotless aircraft, exploratory spacecraft, or other complex engineering systems that will be capable of autonomous operation. An FDI system based on the ASM concept would not only provide traditional diagnostic capabilities, but also integrate the FDI system under a unified framework and provide mechanism for sharing of information between FDI subsystems to fully assess the overall health of the system. The ASM concept begins with definitions borrowed from psychology, wherein a system is regarded as active when it possesses self-image, self-awareness, and an ability to make decisions itself, such that it is able to perform purposeful motions and other transitions with some degree of autonomy from the environment. For an engineering system, self-image would manifest itself as the ability to determine nominal values of sensor data by use of a mathematical model of itself, and selfawareness would manifest itself as the ability to relate sensor data to their nominal values. The ASM for such a system may start with the closed-loop control dynamics that describe the evolution of state variables. As soon as this model was supplemented with nominal values of sensor data, it would possess self-image. The ability to process the current sensor data and compare them with the nominal values would represent self-awareness. On the basis of self-image and self-awareness, the ASM provides the capability for self-identification, detection of abnormalities, and self-diagnosis.

  19. Peripheral neural activity recording and stimulation system.

    PubMed

    Loi, D; Carboni, C; Angius, G; Angotzi, G N; Barbaro, M; Raffo, L; Raspopovic, S; Navarro, X

    2011-08-01

    This paper presents a portable, embedded, microcontroller-based system for bidirectional communication (recording and stimulation) between an electrode, implanted in the peripheral nervous system, and a host computer. The device is able to record and digitize spontaneous and/or evoked neural activities and store them in data files on a PC. In addition, the system has the capability of providing electrical stimulation of peripheral nerves, injecting biphasic current pulses with programmable duration, intensity, and frequency. The recording system provides a highly selective band-pass filter from 800 Hz to 3 kHz, with a gain of 56 dB. The amplification range can be further extended to 96 dB with a variable gain amplifier. The proposed acquisition/stimulation circuitry has been successfully tested through in vivo measurements, implanting a tf-LIFE electrode in the sciatic nerve of a rat. Once implanted, the device showed an input referred noise of 0.83 μVrms, was capable of recording signals below 10 μ V, and generated muscle responses to injected stimuli. The results demonstrate the capability of processing and transmitting neural signals with very low distortion and with a power consumption lower than 1 W. A graphic, user-friendly interface has been developed to facilitate the configuration of the entire system, providing the possibility to activate stimulation and monitor recordings in real time.

  20. Multipurpose active/passive motion compensation system

    SciTech Connect

    Sullivan, R.A.; Clements, R.E.; Davenport, M.R.

    1984-05-01

    A microprocessor-controlled active/passive motion compensation system has been developed for deploying a variety of geotechnical in-situ testing devices with mobile drilling rigs from low-cost service vessels. The light-weight rotary heave compensator incorporates a hydraulic motor as the compensator actuator and a servo-controlled closed loop pump to reduce the air storage and power requirements. Unique features of the system are the use of inertial sensors to measure three components of boat motion, the ability to run the system in active/passive or passive modes, and the ability to automatically lower the drillstring at a constant velocity while maintaining motion compensation. Quantitative measurements made during sea trials offshore California yielded motion compensation accuracy approaching 98 percent which is much better than the compensation achieved with passive systems. Results are presented from offshore in-situ testing with a cone penetrometer, a vane shear device, and a suspension PS logger. The system can also be used for other offshore applications.

  1. PCM Passive Cooling System Containing Active Subsystems

    NASA Technical Reports Server (NTRS)

    Blanding, David E.; Bass, David I.

    2005-01-01

    A multistage system has been proposed for cooling a circulating fluid that is subject to intermittent intense heating. The system would be both flexible and redundant in that it could operate in a basic passive mode, either sequentially or simultaneously with operation of a first, active cooling subsystem, and either sequentially or simultaneously with a second cooling subsystem that could be active, passive, or a combination of both. This flexibility and redundancy, in combination with the passive nature of at least one of the modes of operation, would make the system more reliable, relative to a conventional cooling system. The system would include a tube-in-shell heat exchanger, within which the space between the tubes would be filled with a phase-change material (PCM). The circulating hot fluid would flow along the tubes in the heat exchanger. In the basic passive mode of operation, heat would be conducted from the hot fluid into the PCM, wherein the heat would be stored temporarily by virtue of the phase change.

  2. Research on an Active Seat Belt System

    NASA Astrophysics Data System (ADS)

    Kawashima, Takeshi

    In a car crash, permanent injury can be avoided if deformation of an occupant's rib cage is maintained within the allowable value. In order to realize this condition, the occupant's seat belt tension must be instantaneously adjusted by a feedback control system. In this study, a seat belt tension control system based on the active shock control system is proposed. The semi-active control law used is derived from the sliding mode control method. One advantage of this proposed system is that it does not require a large power actuator because the seat belt tension is controlled by a brake mechanism. The effectiveness is confirmed by numerical simulation using general parameters of a human thorax and a passenger car in a collision scenario with a wall at a velocity of 100 km/h. The feasibility is then confirmed with a control experiment using a scale model of about 1/10 scale. The relative displacement of the thorax model approaches the allowable value smoothly along the control reference and settles near this value. Thus, the proposed seat belt tension control system design is established.

  3. An Update of The Diagnostic Systems Proposed for The New Third Generation UK Light Source, DIAMOND

    NASA Astrophysics Data System (ADS)

    Buckley, Stephen R.; Dufau, Michael J.; Smith, Robert J.

    2002-12-01

    This paper describes the currently proposed systems for electron beam position monitoring (EBPM) and diagnostics for the DIAMOND synchrotron. Although the basic requirements have remained unaltered, the philosophy of implementation has been subject to change, influenced by the experiences of other national light sources, and the emerging availability of commercial equipment, suited to the needs of DIAMOND. This paper focuses in greatest detail on the storage ring systems, including data acquisition and control. Details of Total Current Monitor (TCM) systems, and an active, beam position based interlock system for protecting ID vessels against thermal damage, by beam mis-steer, are also included.

  4. Active Aircraft Pylon Noise Control System

    NASA Technical Reports Server (NTRS)

    Thomas, Russell H. (Inventor); Czech, Michael J (Inventor); Elmiligui, Alaa A. (Inventor)

    2015-01-01

    An active pylon noise control system for an aircraft includes a pylon structure connecting an engine system with an airframe surface of the aircraft and having at least one aperture to supply a gas or fluid therethrough, an intake portion attached to the pylon structure to intake a gas or fluid, a regulator connected with the intake portion via a plurality of pipes, to regulate a pressure of the gas or fluid, a plenum chamber formed within the pylon structure and connected with the regulator, and configured to receive the gas or fluid as regulated by the regulator, and a plurality of injectors in communication with the plenum chamber to actively inject the gas or fluid through the plurality of apertures of the pylon structure.

  5. Voice activity detection for speaker verification systems

    NASA Astrophysics Data System (ADS)

    Borowski, Filip

    2008-01-01

    Complex algorithm for speech activity detection was presented in this article. It is based on speech enhancement, features extraction and final detection algorithm. The first one was published in ETSI standard as a module of "Advanced front-end feature extraction algorithm" in distributed speech recognition system. It consists of two main parts, noise estimatiom and Wiener filtering. For the final detection modified linear prediction coefficients and spectral entropy features are extracted form denoised signal.

  6. Active Space Telescope Systems - A New Paradigm

    NASA Astrophysics Data System (ADS)

    Unwin, Stephen C.; Coulter, D. R.; Gallagher, D. B.; Hickey, G. S.; Laskin, R. A.; Redding, D. C.; Traub, W. A.; Werner, M. W.

    2010-01-01

    New active optics technologies are rapidly maturing that will enable outstanding scientific performance for the next generation of astronomical space telescopes, while dramatically reducing cost drivers such as mass and manufacturing time. Using these technologies, NASA can, with modest further development, field high-performance space telescopes at a cost, risk and development schedule substantially below historical norms. Many key elements of this new system architecture are currently, or soon will be, demonstrated at TRL 6 or even space qualified through previous and ongoing work at the Jet Propulsion Laboratory. This paper describes the overall architecture, discusses the current status of the relevant active optics technologies, and proposes a technology development path to address the remaining elements for some specific NASA science mission examples. Our approach is a new paradigm for moderate-to-large space telescopes, building on the advancements incorporated into the James Webb Space Telescope (JWST) including primary and secondary mirror deployment, segmented optics and a modest level of active control. The primary new ingredients of the flight system are lightweight, easily replicable, mirror segments, incorporating actuators which can control the segment figure on orbit; a robust Wavefront Sensing and Control system to establish the overall figure, phasing, and alignment; and a real time, high dynamic range, high precision control system which maintains the rigid body alignment of the segments to the required precision. This controllability makes it possible to fabricate and assemble to looser tolerances, while reducing overall mission risk. In addition, the control system can greatly simplify the lengthy and expensive integration and test process that is faced by all large telescope missions. The research described in this talk was carried out at the Jet Propulsion Laboratory, California Institute of Technology, under contract with the National

  7. Global Positioning System Synchronized Active Light Autonomous Docking System

    NASA Technical Reports Server (NTRS)

    Howard, Richard T. (Inventor); Book, Michael L. (Inventor); Bryan, Thomas C. (Inventor); Bell, Joseph L. (Inventor)

    1996-01-01

    A Global Positioning System Synchronized Active Light Autonomous Docking System (GPSSALADS) for automatically docking a chase vehicle with a target vehicle comprising at least one active light emitting target which is operatively attached to the target vehicle. The target includes a three-dimensional array of concomitantly flashing lights which flash at a controlled common frequency. The GPSSALADS further comprises a visual tracking sensor operatively attached to the chase vehicle for detecting and tracking the target vehicle. Its performance is synchronized with the flash frequency of the lights by a synchronization means which is comprised of first and second internal clocks operatively connected to the active light target and visual tracking sensor, respectively, for providing timing control signals thereto, respectively. The synchronization means further includes first and second Global Positioning System receivers operatively connected to the first and second internal clocks, respectively, for repeatedly providing simultaneous synchronization pulses to the internal clocks, respectively. In addition, the GPSSALADS includes a docking process controller means which is operatively attached to the chase vehicle and is responsive to the visual tracking sensor for producing commands for the guidance and propulsion system of the chase vehicle.

  8. Global Positioning System Synchronized Active Light Autonomous Docking System

    NASA Technical Reports Server (NTRS)

    Howard, Richard (Inventor)

    1994-01-01

    A Global Positioning System Synchronized Active Light Autonomous Docking System (GPSSALADS) for automatically docking a chase vehicle with a target vehicle comprises at least one active light emitting target which is operatively attached to the target vehicle. The target includes a three-dimensional array of concomitantly flashing lights which flash at a controlled common frequency. The GPSSALADS further comprises a visual tracking sensor operatively attached to the chase vehicle for detecting and tracking the target vehicle. Its performance is synchronized with the flash frequency of the lights by a synchronization means which is comprised of first and second internal clocks operatively connected to the active light target and visual tracking sensor, respectively, for providing timing control signals thereto, respectively. The synchronization means further includes first and second Global Positioning System receivers operatively connected to the first and second internal clocks, respectively, for repeatedly providing simultaneous synchronization pulses to the internal clocks, respectively. In addition, the GPSSALADS includes a docking process controller means which is operatively attached to the chase vehicle and is responsive to the visual tracking sensor for producing commands for the guidance and propulsion system of the chase vehicle.

  9. Global Positioning System Synchronized Active Light Autonomous Docking System

    NASA Astrophysics Data System (ADS)

    Howard, Richard

    1994-08-01

    A Global Positioning System Synchronized Active Light Autonomous Docking System (GPSSALADS) for automatically docking a chase vehicle with a target vehicle comprises at least one active light emitting target which is operatively attached to the target vehicle. The target includes a three-dimensional array of concomitantly flashing lights which flash at a controlled common frequency. The GPSSALADS further comprises a visual tracking sensor operatively attached to the chase vehicle for detecting and tracking the target vehicle. Its performance is synchronized with the flash frequency of the lights by a synchronization means which is comprised of first and second internal clocks operatively connected to the active light target and visual tracking sensor, respectively, for providing timing control signals thereto, respectively. The synchronization means further includes first and second Global Positioning System receivers operatively connected to the first and second internal clocks, respectively, for repeatedly providing simultaneous synchronization pulses to the internal clocks, respectively. In addition, the GPSSALADS includes a docking process controller means which is operatively attached to the chase vehicle and is responsive to the visual tracking sensor for producing commands for the guidance and propulsion system of the chase vehicle.

  10. Processing abstract language modulates motor system activity.

    PubMed

    Glenberg, Arthur M; Sato, Marc; Cattaneo, Luigi; Riggio, Lucia; Palumbo, Daniele; Buccino, Giovanni

    2008-06-01

    Embodiment theory proposes that neural systems for perception and action are also engaged during language comprehension. Previous neuroimaging and neurophysiological studies have only been able to demonstrate modulation of action systems during comprehension of concrete language. We provide neurophysiological evidence for modulation of motor system activity during the comprehension of both concrete and abstract language. In Experiment 1, when the described direction of object transfer or information transfer (e.g., away from the reader to another) matched the literal direction of a hand movement used to make a response, speed of responding was faster than when the two directions mismatched (an action-sentence compatibility effect). In Experiment 2, we used single-pulse transcranial magnetic stimulation to study changes in the corticospinal motor pathways to hand muscles while reading the same sentences. Relative to sentences that do not describe transfer, there is greater modulation of activity in the hand muscles when reading sentences describing transfer of both concrete objects and abstract information. These findings are discussed in relation to the human mirror neuron system. PMID:18470821

  11. Active polarimeter optical system laser hazard analysis.

    SciTech Connect

    Augustoni, Arnold L.

    2005-07-01

    A laser hazard analysis was performed for the SNL Active Polarimeter Optical System based on the ANSI Standard Z136.1-2000, American National Standard for Safe Use of Lasers and the ANSI Standard Z136.6-2000, American National Standard for Safe Use of Lasers Outdoors. The Active Polarimeter Optical System (APOS) uses a pulsed, near-infrared, chromium doped lithium strontium aluminum fluoride (Cr:LiSAF) crystal laser in conjunction with a holographic diffuser and lens to illuminate a scene of interest. The APOS is intended for outdoor operations. The system is mounted on a height adjustable platform (6 feet to 40 feet) and sits atop a tripod that points the beam downward. The beam can be pointed from nadir to as much as 60 degrees off of nadir producing an illuminating spot geometry that can vary from circular (at nadir) to elliptical in shape (off of nadir). The JP Innovations crystal Cr:LiSAF laser parameters are presented in section II. The illuminating laser spot size is variable and can be adjusted by adjusting the separation distance between the lens and the holographic diffuser. The system is adjusted while platform is at the lowest level. The laser spot is adjusted for a particular spot size at a particular distance (elevation) from the laser by adjusting the separation distance (d{sub diffuser}) to predetermined values. The downward pointing angle is also adjusted before the platform is raised to the selected operation elevation.

  12. Extravehicular Activity (EVA) 101: Constellation EVA Systems

    NASA Technical Reports Server (NTRS)

    Jordan, Nicole C.

    2007-01-01

    A viewgraph presentation on Extravehicular Activity (EVA) Systems is shown. The topics include: 1) Why do we need space suits? 2) Protection From the Environment; 3) Primary Life Support System (PLSS); 4) Thermal Control; 5) Communications; 6) Helmet and Extravehicular Visor Assy; 7) Hard Upper Torso (HUT) and Arm Assy; 8) Display and Controls Module (DCM); 9) Gloves; 10) Lower Torso Assembly (LTA); 11) What Size Do You Need?; 12) Boot and Sizing Insert; 13) Boot Heel Clip and Foot Restraint; 14) Advanced and Crew Escape Suit; 15) Nominal & Off-Nominal Landing; 16) Gemini Program (mid-1960s); 17) Apollo EVA on Service Module; 18) A Bold Vision for Space Exploration, Authorized by Congress; 19) EVA System Missions; 20) Configurations; 21) Reduced Gravity Program; and 22) Other Opportunities.

  13. Active Thermal Control System Development for Exploration

    NASA Technical Reports Server (NTRS)

    Westheimer, David

    2007-01-01

    All space vehicles or habitats require thermal management to maintain a safe and operational environment for both crew and hardware. Active Thermal Control Systems (ATCS) perform the functions of acquiring heat from both crew and hardware within a vehicle, transporting that heat throughout the vehicle, and finally rejecting that energy into space. Almost all of the energy used in a space vehicle eventually turns into heat, which must be rejected in order to maintain an energy balance and temperature control of the vehicle. For crewed vehicles, Active Thermal Control Systems are pumped fluid loops that are made up of components designed to perform these functions. NASA has been actively developing technologies that will enable future missions or will provide significant improvements over the state of the art technologies. These technologies have are targeted for application on the Crew Exploration Vehicle (CEV), or Orion, and a Lunar Surface Access Module (LSAM). The technologies that have been selected and are currently under development include: fluids that enable single loop ATCS architectures, a gravity insensitive vapor compression cycle heat pump, a sublimator with reduced sensitivity to feedwater contamination, an evaporative heat sink that can operate in multiple ambient pressure environments, a compact spray evaporator, and lightweight radiators that take advantage of carbon composites and advanced optical coatings.

  14. Noninvasive ambulatory measurement system of cardiac activity.

    PubMed

    Pino, Esteban J; Chavez, Javier A P; Aqueveque, Pablo

    2015-08-01

    This work implements a noninvasive system that measures the movements caused by cardiac activity. It uses unobtrusive Electro-Mechanical Films (EMFi) on the seat and on the backrest of a regular chair. The system detects ballistocardiogram (BCG) and respiration movements. Real data was obtained from 54 volunteers. 19 of them were measured in the laboratory and 35 in a hospital waiting room. Using a BIOPAC acquisition system, the ECG was measured simultaneously to the BCG for comparison. Wavelet Transform (WT) is a better option than Empirical Mode Decomposition (EMD) for signal extraction and produces higher effective measurement time. In the laboratory, the best results are obtained on the seat. The correlation index was 0.9800 and the Bland-Altman limits of agreement were 0.7136 ± 4.3673 [BPM]. In the hospital waiting room, the best results are also from the seat sensor. The correlation index was 0.9840, and the limits of agreement were 0.4386 ± 3.5884 [BPM]. The system is able to measure BCG in an unobtrusive way and determine the cardiac frequency with high precision. It is simple to use, which means the system can easily be used in non-standard settings: resting in a chair or couch, at the gym, schools or in a hospital waiting room, as shown. PMID:26738057

  15. Advanced Active Thermal Control Systems Architecture Study

    NASA Technical Reports Server (NTRS)

    Hanford, Anthony J.; Ewert, Michael K.

    1996-01-01

    The Johnson Space Center (JSC) initiated a dynamic study to determine possible improvements available through advanced technologies (not used on previous or current human vehicles), identify promising development initiatives for advanced active thermal control systems (ATCS's), and help prioritize funding and personnel distribution among many research projects by providing a common basis to compare several diverse technologies. Some technologies included were two-phase thermal control systems, light-weight radiators, phase-change thermal storage, rotary fluid coupler, and heat pumps. JSC designed the study to estimate potential benefits from these various proposed and under-development thermal control technologies for five possible human missions early in the next century. The study compared all the technologies to a baseline mission using mass as a basis. Each baseline mission assumed an internal thermal control system; an external thermal control system; and aluminum, flow-through radiators. Solar vapor compression heat pumps and light-weight radiators showed the greatest promise as general advanced thermal technologies which can be applied across a range of missions. This initial study identified several other promising ATCS technologies which offer mass savings and other savings compared to traditional thermal control systems. Because the study format compares various architectures with a commonly defined baseline, it is versatile and expandable, and is expected to be updated as needed.

  16. Scuba diving activates vascular antioxidant system.

    PubMed

    Sureda, A; Batle, J M; Ferrer, M D; Mestre-Alfaro, A; Tur, J A; Pons, A

    2012-07-01

    The aim was to study the effects of scuba diving immersion on plasma antioxidant defenses, nitric oxide production, endothelin-1 and vascular endothelial growth factor levels. 9 male divers performed an immersion at 50 m depth for a total time of 35 min. Blood samples were obtained before diving at rest, immediately after diving, and 3 h after the diving session. Leukocyte counts, plasma 8oxoHG, malondialdehyde and nitrite levels significantly increased after recovery. Activities of lactate dehydrogenase, creatine kinase, catalase and superoxide significantly increased immediately after diving and these activities remained high after recovery. Plasma myeloperoxidase activity and protein levels and extracellular superoxide dismutase protein levels increased after 3 h. Endothelin-1 concentration significantly decreased after diving and after recovery. Vascular endothelial growth factor concentration significantly increased after diving when compared to pre-diving values, returning to initial values after recovery. Scuba diving at great depth activated the plasma antioxidant system against the oxidative stress induced by elevated pO₂ oxygen associated with hyperbaria. The decrease in endothelin-1 levels and the increase in nitric oxide synthesis could be factors that contribute to post-diving vasodilation. Diving increases vascular endothelial growth factor plasma levels which can contribute to the stimulation of tissue resistance to diving-derived oxidative damage.

  17. Velocity distribution in active particles systems

    PubMed Central

    Marconi, Umberto Marini Bettolo; Gnan, Nicoletta; Paoluzzi, Matteo; Maggi, Claudio; Di Leonardo, Roberto

    2016-01-01

    We derive an analytic expression for the distribution of velocities of multiple interacting active particles which we test by numerical simulations. In clear contrast with equilibrium we find that the velocities are coupled to positions. Our model shows that, even for two particles only, the individual velocities display a variance depending on the interparticle separation and the emergence of correlations between the velocities of the particles. When considering systems composed of many particles we find an analytic expression connecting the overall velocity variance to density, at the mean-field level, and to the pair distribution function valid in the limit of small noise correlation times. Finally we discuss the intriguing analogies and main differences between our effective free energy functional and the theoretical scenario proposed so far for phase-separating active particles. PMID:27001289

  18. Atlantoaxial Joint Interlocking Following Type II Odontoid Fracture Associated with Posterolateral Atlantoaxial Dislocation: a Case Report and Review of Published Reports.

    PubMed

    He, Deng-Wei; Huang, Wen-Jun; Sheng, Xiao-Yong; Wu, Li-Jun; Fan, Shun-Wu

    2016-08-01

    A rare case of atlantoaxial lateral mass joint interlocking secondary to traumatic posterolateral C1,2 complete dislocation associated with type II odontoid fracture is herein reported and the impact of atlantoaxial joint interlocking on fracture reduction discussed. A 72-year-old man presented with traumatic atlantoaxial lateral mass joint interlocking without spinal cord signal change, the diagnosis being confirmed by radiography and 3-D reconstruction digital anatomy. Posterior internal fixation was performed after failure to achieve closed reduction by skull traction. After many surgical attempts at setting had failed because of interlocking of the lateral mass joints, reduction was achieved by compressing the posterior parts of the atlantal and axial screws. Odontoid bone union and C1,2 posterior bone graft fusion were eventually obtained by the 12-month follow-up. The patient had a complete neurological recovery with no residual neck pain or radiculopathy.

  19. Atlantoaxial Joint Interlocking Following Type II Odontoid Fracture Associated with Posterolateral Atlantoaxial Dislocation: a Case Report and Review of Published Reports.

    PubMed

    He, Deng-Wei; Huang, Wen-Jun; Sheng, Xiao-Yong; Wu, Li-Jun; Fan, Shun-Wu

    2016-08-01

    A rare case of atlantoaxial lateral mass joint interlocking secondary to traumatic posterolateral C1,2 complete dislocation associated with type II odontoid fracture is herein reported and the impact of atlantoaxial joint interlocking on fracture reduction discussed. A 72-year-old man presented with traumatic atlantoaxial lateral mass joint interlocking without spinal cord signal change, the diagnosis being confirmed by radiography and 3-D reconstruction digital anatomy. Posterior internal fixation was performed after failure to achieve closed reduction by skull traction. After many surgical attempts at setting had failed because of interlocking of the lateral mass joints, reduction was achieved by compressing the posterior parts of the atlantal and axial screws. Odontoid bone union and C1,2 posterior bone graft fusion were eventually obtained by the 12-month follow-up. The patient had a complete neurological recovery with no residual neck pain or radiculopathy. PMID:27627726

  20. Influenza virus activation of the interferon system

    PubMed Central

    Killip, Marian J.; Fodor, Ervin; Randall, Richard E.

    2015-01-01

    The host interferon (IFN) response represents one of the first barriers that influenza viruses must surmount in order to establish an infection. Many advances have been made in recent years in understanding the interactions between influenza viruses and the interferon system. In this review, we summarise recent work regarding activation of the type I IFN response by influenza viruses, including attempts to identify the viral RNA responsible for IFN induction, the stage of the virus life cycle at which it is generated and the role of defective viruses in this process. PMID:25678267

  1. System and method for monitoring cellular activity

    NASA Technical Reports Server (NTRS)

    Bearman, Gregory H. (Inventor); Fraser, Scott E. (Inventor); Lansford, Russell D. (Inventor)

    2004-01-01

    A system and method for monitoring cellular activity in a cellular specimen. According to one embodiment, a plurality of excitable markers are applied to the specimen. A multi-photon laser microscope is provided to excite a region of the specimen and cause fluorescence to be radiated from the region. The radiating fluorescence is processed by a spectral analyzer to separate the fluorescence into respective wavelength bands. The respective bands of fluorescence are then collected by an array of detectors, with each detector receiving a corresponding one of the wavelength bands.

  2. System and method for monitoring cellular activity

    NASA Technical Reports Server (NTRS)

    Bearman, Gregory H. (Inventor); Fraser, Scott E. (Inventor); Lansford, Russell D. (Inventor)

    2002-01-01

    A system and method for monitoring cellular activity in a cellular specimen. According to one embodiment, a plurality of excitable markers are applied to the specimen. A multi-photon laser microscope is provided to excite a region of the specimen and cause fluorescence to be radiated from the region. The radiating fluorescence is processed by a spectral analyzer to separate the fluorescence into respective wavelength bands. The respective bands of fluorescence are then collected by an array of detectors, with each detector receiving a corresponding one of the wavelength bands.

  3. Spontaneous Oscillations in an Active Matter System

    NASA Astrophysics Data System (ADS)

    Hayes, Robert; Tsang, Boyce; Granick, Steve

    Active matter (which consumes energy to move about) can organize into dynamic structures more interesting than those possible at steady-state. Here we show spontaneous periodic self-assembly in a simple three-component system of water, oil phase, and surfactant at constant room temperature, with emphasis on one model system. Benchtop experiments show that liquid crystal oil droplets spontaneously and collectively oscillate like a `beating heart' for several hours; contract, relax, and subsequently re-contract in a petri dish at a rate of a few `beats' per minute. These oscillations, emergent from the cooperative interaction of the three components, are driven by the competition between positive and negative feedback processes. This illustration of feedback in action reveals a new way to program self-assembled structures to vary with time.

  4. Analog VLSI system for active drag reduction

    SciTech Connect

    Gupta, B.; Goodman, R.; Jiang, F.; Tai, Y.C.; Tung, S.; Ho, C.M.

    1996-10-01

    In today`s cost-conscious air transportation industry, fuel costs are a substantial economic concern. Drag reduction is an important way to reduce costs. Even a 5% reduction in drag translates into estimated savings of millions of dollars in fuel costs. Drawing inspiration from the structure of shark skin, the authors are building a system to reduce drag along a surface. Our analog VLSI system interfaces with microfabricated, constant-temperature shear stress sensors. It detects regions of high shear stress and outputs a control signal to activate a microactuator. We are in the process of verifying the actual drag reduction by controlling microactuators in wind tunnel experiments. We are encouraged that an approach similar to one that biology employs provides a very useful contribution to the problem of drag reduction. 9 refs., 21 figs.

  5. Active alignment/contact verification system

    DOEpatents

    Greenbaum, William M.

    2000-01-01

    A system involving an active (i.e. electrical) technique for the verification of: 1) close tolerance mechanical alignment between two component, and 2) electrical contact between mating through an elastomeric interface. For example, the two components may be an alumina carrier and a printed circuit board, two mating parts that are extremely small, high density parts and require alignment within a fraction of a mil, as well as a specified interface point of engagement between the parts. The system comprises pairs of conductive structures defined in the surfaces layers of the alumina carrier and the printed circuit board, for example. The first pair of conductive structures relate to item (1) above and permit alignment verification between mating parts. The second pair of conductive structures relate to item (2) above and permit verification of electrical contact between mating parts.

  6. Actively controlled vibration welding system and method

    DOEpatents

    Cai, Wayne W.; Kang, Bongsu; Tan, Chin-An

    2013-04-02

    A vibration welding system includes a controller, welding horn, an active material element, and anvil assembly. The assembly may include an anvil body connected to a back plate and support member. The element, e.g., a piezoelectric stack or shape memory alloy, is positioned with respect to the assembly. The horn vibrates in a desirable first direction to form a weld on a work piece. The element controls any vibrations in a second direction by applying calibrated response to the anvil body in the second direction. A method for controlling undesirable vibrations in the system includes positioning the element with respect to the anvil assembly, connecting the anvil body to the support member through the back plate, vibrating the horn in a desirable first direction, and transmitting an input signal to the element to control vibration in an undesirable second direction.

  7. Active balance system and vibration balanced machine

    NASA Technical Reports Server (NTRS)

    Qiu, Songgang (Inventor); Augenblick, John E. (Inventor); Peterson, Allen A. (Inventor); White, Maurice A. (Inventor)

    2005-01-01

    An active balance system is provided for counterbalancing vibrations of an axially reciprocating machine. The balance system includes a support member, a flexure assembly, a counterbalance mass, and a linear motor or an actuator. The support member is configured for attachment to the machine. The flexure assembly includes at least one flat spring having connections along a central portion and an outer peripheral portion. One of the central portion and the outer peripheral portion is fixedly mounted to the support member. The counterbalance mass is fixedly carried by the flexure assembly along another of the central portion and the outer peripheral portion. The linear motor has one of a stator and a mover fixedly mounted to the support member and another of the stator and the mover fixedly mounted to the counterbalance mass. The linear motor is operative to axially reciprocate the counterbalance mass.

  8. Metal-organic and supramolecular architectures based on mechanically interlocked molecules

    NASA Astrophysics Data System (ADS)

    Fernando, Isurika Rosini

    The focus of this work is on mechanically interlocked molecules (MIMs), which have unusual physicochemical and mechanical properties with potential applications in nano-scale/molecular devices and high strength materials. Rotaxanes, for example, consist of an axle-like molecule threaded through a wheel-like molecule, with bulky groups at the two ends of the axle preventing the wheel from dissociating. The position of the wheel along the axle can be switched in a controllable and reversible manner by applying external stimuli, a feature that might lead to the next generation of computers. Molecularly woven materials (MWMs), another example of molecules with mechanically interlocked features, are predicted to be unprecedentedly strong while being lightweight and flexible. With the ultimate goal of achieving control over the functioning of molecular devices in the solid state, a variety of pseudorotaxane building blocks were prepared and characterized, including a novel, rare blue-colored motif. The temperature-dependent assembly/disassembly of pseudorotaxanes was exploited for the construction of single-wavelength colorimetric temperature sensors over a 100 °C window. Pseudorotaxanes based on aromatic crown ether wheels and disubstituted 4,4'-bipyridinium axles were converted into rotaxanes upon binding to metal complexes (zinc, cadmium, mercury, copper, cobalt), and the formation of ordered crystalline arrays was studied in the solid state. The columnar organization of pseudorotaxanes by Hg2X6 2-- complexes (X = Cl, Br, I), leading to unprecedented dichroic (blue/red) rotaxane crystals, was demonstrated for the first time. From the crystal structures studied it became apparent that negatively charged metal complexes are needed for successful assembly with the positively charged pseudorotaxane units. To be able to use the more common, positively charged metal ions for rotaxane framework construction, neutral and negatively charged pseudorotaxanes were synthesized

  9. Geometrical evolution of interlocked rough slip surfaces: The role of normal stress

    NASA Astrophysics Data System (ADS)

    Badt, Nir; Hatzor, Yossef H.; Toussaint, Renaud; Sagy, Amir

    2016-06-01

    We study the evolution of slip surface topography using direct shear tests of perfectly mating surfaces. The tests are performed under imposed constant normal stress and constant slip rate conditions, to a sliding distance comparable to the roughness scale of the studied surfaces. Prismatic limestone blocks are fractured in tension using four-point bending and the generated surface topographies are measured using a laser profilometer. The initially rough fracture interfaces are tested in direct shear while ensuring a perfectly mating configuration at the beginning of each test. The predetermined sliding distance in all tests is 10 mm and the sliding velocity is 0.05 mm/s. A constant normal stress is maintained throughout the tests using closed loop servo control. The range of normal stresses applied is between 2 MPa and 15 MPa. After shearing, the surface topographies are re-scanned and the geometrical evolution is analyzed. We find that surface roughness increases with increasing normal stress: under normal stresses below 5 MPa the surfaces become smoother compared to the original geometry, whereas under normal stresses between 7.5 MPa and 15 MPa the surfaces clearly become rougher following shear. Statistical spectral analyses of the roughness profiles indicate that roughness increases with length-scale. Power spectral density values parallel to the slip orientation are fitted by power-law with typical power value of 2.6, corresponding to a Hurst exponent of 0.8, assuming self-affine roughness. This power value is consistent for the post-sheared surfaces and is obtained even when the original surface roughness does not follow initially a power-law form. The value of the scaling-law prefactor however increases with increasing normal stress. We find that the deformation associated with shearing initially rough interlocked surfaces extends beyond the immediate tested surface, further into the intact rock material. The intensity of the damage and its spatial

  10. Next Generation Active Buffet Suppression System

    NASA Technical Reports Server (NTRS)

    Galea, Stephen C.; Ryall, Thomas G.; Henderson, Douglas A.; Moses, Robert W.; White, Edward V.; Zimcik, David G.

    2003-01-01

    Buffeting is an aeroelastic phenomenon that is common to high performance aircraft, especially those with twin vertical tails like the F/A-18, at high angles of attack. These loads result in significant random stresses, which may cause fatigue damage leading to restricted capabilities and availability of the aircraft. This paper describes an international collaborative research activity among Australia, Canada and the United States involving the use of active structural control to alleviate the damaging structural response to these loads. The research program is being co-ordinated by the Air Force Research Laboratory (AFRL) and is being conducted under the auspices of The Technical Cooperative Program (TTCP). This truly unique collaborative program has been developed to enable each participating country to contribute resources toward a program that coalesces a broad range of technical knowledge and expertise into a single investigation. This collaborative program is directed toward a full-scale test of an F/A-18 empennage, which is an extension of an earlier initial test. The current program aims at applying advanced directional piezoactuators, the aircraft rudder, switch mode amplifiers and advanced control strategies on a full-scale structure to demonstrate the enhanced performance and capability of the advanced active BLA control system in preparation for a flight test demonstration.

  11. Thick fibrous composite reinforcements behave as special second-gradient materials: three-point bending of 3D interlocks

    NASA Astrophysics Data System (ADS)

    Madeo, Angela; Ferretti, Manuel; dell'Isola, Francesco; Boisse, Philippe

    2015-08-01

    In this paper, we propose to use a second gradient, 3D orthotropic model for the characterization of the mechanical behavior of thick woven composite interlocks. Such second-gradient theory is seen to directly account for the out-of-plane bending rigidity of the yarns at the mesoscopic scale which is, in turn, related to the bending stiffness of the fibers composing the yarns themselves. The yarns' bending rigidity evidently affects the macroscopic bending of the material and this fact is revealed by presenting a three-point bending test on specimens of composite interlocks. These specimens differ one from the other for the different relative direction of the yarns with respect to the edges of the sample itself. Both types of specimens are independently seen to take advantage of a second-gradient modeling for the correct description of their macroscopic bending modes. The results presented in this paper are essential for the setting up of a correct continuum framework suitable for the mechanical characterization of composite interlocks. The few second-gradient parameters introduced by the present model are all seen to be associated with peculiar deformation modes of the mesostructure (bending of the yarns) and are determined by inverse approach. Although the presented results undoubtedly represent an important step toward the complete characterization of the mechanical behavior of fibrous composite reinforcements, more complex hyperelastic second-gradient constitutive laws must be conceived in order to account for the description of all possible mesostructure-induced deformation patterns.

  12. A new melanoma diagnosis active support system.

    PubMed

    Fiorini, R A; Dacquino, G; Laguteta, G

    2004-01-01

    The aim of this paper is to present the operational performance of a new MDASS (Melanoma Diagnosis Active Support System) prototype able to distil optimal knowledge from acquired data to automatically capture and reliably discriminate and quantify the stage of disease evolution. Automated classification dermatoscopical parameters can be divided into two main classes: Size Descriptor (point size, local, and global) and Intrinsic Descriptor (morphological, geometrical, chromatic, others). Usually elementary geometric shape robust and effective characterization, invariant to environment and optical geometry transformations, on a rigorous mathematical level is a key and computational intensive problem. MDASS uses GEOGINE (GEOmetrical enGINE), a state-of-the-art OMG (Ontological Model Generator) based on n-D Tensor Moment Invariants for shape/texture effective description. MDASS main results show robust disease classification procedure with distillation of minimal reference grids for pathological cases and they ultimately achieve effective early diagnosis of melanocytic lesion. System results are validated by carefully designed experiments with certified clinical reference database. Overall system operational performance is presented. Finally, MDASS error analysis and computational complexity are addressed and discussed. PMID:17270962

  13. Crystalline stereocomplexed polycarbonates: hydrogen-bond-driven interlocked orderly assembly of the opposite enantiomers.

    PubMed

    Liu, Ye; Ren, Wei-Min; Wang, Meng; Liu, Chuang; Lu, Xiao-Bing

    2015-02-01

    Four novel crystalline stereocomplexed polymers are formed by mixing isotactic (R)- and (S)-polycarbonates in 1:1 mass ratio. They show the enhanced thermal stability and new crystalline behavior, significantly distinct from the component enantiomer. Two stereocomplexed CO2 -based polycarbonates from meso-3,4-epoxytetrahydrofuran and 4,4-dimethyl-3,5,8-trioxabicyclo[5.1.0]octane have high melting temperatures of up to 300 °C, about 30 °C higher than the individual enantiomers. Isotactic (R)- or (S)-poly(cyclopentene carbonate) and poly(cis-2,3-butene carbonate) are typical amorphous polymeric materials, however, upon mixing both enantiomers together, a strong interlocked interaction between polymer chains of opposite configuration occurs, affording the crystalline stereocomplexes with melting temperatures of about 200 °C and 180 °C, respectively. A DFT study suggests that the driving force forming the stereocomplex is the hydrogen-bonding between carbonate units of the opposite enantiomers. PMID:25537626

  14. [Surgical management of bone metastases of the lower extremity with AO interlocking nail].

    PubMed

    Krawzak, H W; Heistermann, H P; Ibing, H P; Meffert, R; Hohlbach, G

    1996-01-01

    Between January 1991 and June 1995 we have operated on 19 patients (9 male, 10 female) with 22 skeletal metastases of the lower limb (19 femora, 3 tibiae) using a static interlocking nail. Closed intramedullary nailing without resection of the metastasis has been established as our standard procedure. We have stabilized 15 patients with advanced osteolysis and seven pathological fractures. Sixteen patients underwent postoperative local radiation therapy with 40 Gy. As intraoperative complications we have observed one fracture of an osteolysis and one death due to fat embolism. Postoperatively there were observed one seroma, one haematoma and one patient with non fatal pulmonary embolism following DVT. Two patients died within the first 30 postoperative days because of tumor progression. All patients surviving longer than 30 days could be mobilized under full weight-bearing. Morphine like analgetics for metastasis related pain were no longer needed. A secondary instability has not been observed within a mean survival time of 199 days (811 longest follow up). Closed intramedullary nailing in combination with postoperative local radiation therapy seems to be an appropriate and technically non demanding procedure to stabilize skeletal metastases of the lower limb in patients with a short or medium-term expectation of life. PMID:9027156

  15. A Bio-Inspired Swellable Microneedle Adhesive for Mechanical Interlocking with Tissue

    PubMed Central

    Yang, Seung Yun; O'Cearbhaill, Eoin D.; Sisk, Geoffroy C.; Park, Kyeng Min; Cho, Woo Kyung; Villiger, Martin; Bouma, Brett E.; Pomahac, Bohdan; Karp, Jeffrey M.

    2013-01-01

    Achieving significant adhesion to soft tissues while minimizing tissue damage poses a considerable clinical challenge. Chemical-based adhesives require tissue-specific reactive chemistry, typically inducing a significant inflammatory response. Staples are fraught with limitations including high-localized tissue stress and increased risk of infection, and nerve and blood vessel damage. Here, inspired by the endoparasite Pomphorhynchus laevis which swells its proboscis to attach to its host’s intestinal wall, we have developed a biphasic microneedle array that mechanically interlocks with tissue through swellable microneedle tips, achieving ~ 3.5 fold increase in adhesion strength compared to staples in skin graft fixation, and removal force of ~ 4.5 N/cm2 from intestinal mucosal tissue. Comprising a poly(styrene)-block-poly(acrylic acid) swellable tip and non-swellable polystyrene core, conical microneedles penetrate tissue with minimal insertion force and depth, yet high adhesion strength in their swollen state. Uniquely, this design provides universal soft tissue adhesion with minimal damage, less traumatic removal, reduced risk of infection and delivery of bioactive therapeutics. PMID:23591869

  16. A bio-inspired swellable microneedle adhesive for mechanical interlocking with tissue

    NASA Astrophysics Data System (ADS)

    Yang, Seung Yun; O'Cearbhaill, Eoin D.; Sisk, Geoffroy C.; Park, Kyeng Min; Cho, Woo Kyung; Villiger, Martin; Bouma, Brett E.; Pomahac, Bohdan; Karp, Jeffrey M.

    2013-04-01

    Achieving significant adhesion to soft tissues while minimizing tissue damage poses a considerable clinical challenge. Chemical-based adhesives require tissue-specific reactive chemistry, typically inducing a significant inflammatory response. Staples are fraught with limitations including high-localized tissue stress and increased risk of infection, and nerve and blood vessel damage. Here inspired by the endoparasite Pomphorhynchus laevis, which swells its proboscis to attach to its host’s intestinal wall, we have developed a biphasic microneedle array that mechanically interlocks with tissue through swellable microneedle tips, achieving ~3.5-fold increase in adhesion strength compared with staples in skin graft fixation, and removal force of ~4.5 N cm-2 from intestinal mucosal tissue. Comprising a poly(styrene)-block-poly(acrylic acid) swellable tip and non-swellable polystyrene core, conical microneedles penetrate tissue with minimal insertion force and depth, yet high adhesion strength in their swollen state. Uniquely, this design provides universal soft tissue adhesion with minimal damage, less traumatic removal, reduced risk of infection and delivery of bioactive therapeutics.

  17. Assembly of porous smectic structures formed from interlocking high-symmetry planar nanorings.

    PubMed

    Avendaño, Carlos; Jackson, George; Müller, Erich A; Escobedo, Fernando A

    2016-08-30

    Materials comprising porous structures, often in the form of interconnected concave cavities, are typically assembled from convex molecular building blocks. The use of nanoparticles with a characteristic nonconvex shape provides a promising strategy to create new porous materials, an approach that has been recently used with cagelike molecules to form remarkable liquids with "scrabbled" porous cavities. Nonconvex mesogenic building blocks can be engineered to form unique self-assembled open structures with tunable porosity and long-range order that is intermediate between that of isotropic liquids and of crystalline solids. Here we propose the design of highly open liquid-crystalline structures from rigid nanorings with ellipsoidal and polygonal geometry. By exploiting the entropic ordering characteristics of athermal colloidal particles, we demonstrate that high-symmetry nonconvex rings with large internal cavities interlock within a 2D layered structure leading to the formation of distinctive liquid-crystalline smectic phases. We show that these smectic phases possess uniquely high free volumes of up to ∼95%, a value significantly larger than the 50% that is typically achievable with smectic phases formed by more conventional convex rod- or disklike mesogenic particles. PMID:27540114

  18. Assembly of porous smectic structures formed from interlocking high-symmetry planar nanorings.

    PubMed

    Avendaño, Carlos; Jackson, George; Müller, Erich A; Escobedo, Fernando A

    2016-08-30

    Materials comprising porous structures, often in the form of interconnected concave cavities, are typically assembled from convex molecular building blocks. The use of nanoparticles with a characteristic nonconvex shape provides a promising strategy to create new porous materials, an approach that has been recently used with cagelike molecules to form remarkable liquids with "scrabbled" porous cavities. Nonconvex mesogenic building blocks can be engineered to form unique self-assembled open structures with tunable porosity and long-range order that is intermediate between that of isotropic liquids and of crystalline solids. Here we propose the design of highly open liquid-crystalline structures from rigid nanorings with ellipsoidal and polygonal geometry. By exploiting the entropic ordering characteristics of athermal colloidal particles, we demonstrate that high-symmetry nonconvex rings with large internal cavities interlock within a 2D layered structure leading to the formation of distinctive liquid-crystalline smectic phases. We show that these smectic phases possess uniquely high free volumes of up to ∼95%, a value significantly larger than the 50% that is typically achievable with smectic phases formed by more conventional convex rod- or disklike mesogenic particles.

  19. Accelerated cell-surface interlocking on plasma polymer-modified porous ceramics.

    PubMed

    Rebl, Henrike; Finke, Birgit; Schmidt, Jürgen; Mohamad, Heba S; Ihrke, Roland; Helm, Christiane A; Nebe, J Barbara

    2016-12-01

    Excellent osseointegration of permanent implants is crucial for the long lasting success of the implantation. To improve the osseointegrative potential, bio-inert titanium alloy surfaces (Ti6Al4V) are modified by plasma chemical oxidation (PCO®) of the titanium-oxide layer to a non-stoichiometric, amorphous calcium phosphate layer. The native titanium-oxide film measuring only a few nanometers is converted by PCO® to a thick porous calcium phosphate layer of about 10μm. In a second step the PCO surface is combined with a cell adhesive plasma-polymerized allylamine (PPAAm) nano film (5 and 50nm). Independent of the PPAAm coating homogeneity, the human osteoblast-like MG-63 cells show a remarkable increase in cell size and well-developed filopodia. Analyses of the actin cytoskeleton reveal that the cells mold to the pore shape of the PPAAm-covered PCO, thereby establishing a strong attachment to the surface. Interestingly, we could demonstrate that even though our untreated PCO shows excellent hydrophilicity, this alone is not sufficient to facilitate fast cell spreading, but the positive surface charges mediated by PPAAm. This multilayer composite material guarantees enhanced interlocking of the cells with the porous surface.

  20. Accelerated cell-surface interlocking on plasma polymer-modified porous ceramics.

    PubMed

    Rebl, Henrike; Finke, Birgit; Schmidt, Jürgen; Mohamad, Heba S; Ihrke, Roland; Helm, Christiane A; Nebe, J Barbara

    2016-12-01

    Excellent osseointegration of permanent implants is crucial for the long lasting success of the implantation. To improve the osseointegrative potential, bio-inert titanium alloy surfaces (Ti6Al4V) are modified by plasma chemical oxidation (PCO®) of the titanium-oxide layer to a non-stoichiometric, amorphous calcium phosphate layer. The native titanium-oxide film measuring only a few nanometers is converted by PCO® to a thick porous calcium phosphate layer of about 10μm. In a second step the PCO surface is combined with a cell adhesive plasma-polymerized allylamine (PPAAm) nano film (5 and 50nm). Independent of the PPAAm coating homogeneity, the human osteoblast-like MG-63 cells show a remarkable increase in cell size and well-developed filopodia. Analyses of the actin cytoskeleton reveal that the cells mold to the pore shape of the PPAAm-covered PCO, thereby establishing a strong attachment to the surface. Interestingly, we could demonstrate that even though our untreated PCO shows excellent hydrophilicity, this alone is not sufficient to facilitate fast cell spreading, but the positive surface charges mediated by PPAAm. This multilayer composite material guarantees enhanced interlocking of the cells with the porous surface. PMID:27612809

  1. Fluorescent Gold Nanoclusters with Interlocked Staples and a Fully Thiolate-Bound Kernel.

    PubMed

    Gan, Zibao; Lin, Yuejian; Luo, Lun; Han, Guangmei; Liu, Wei; Liu, Zhengjie; Yao, Chuanhao; Weng, Linhong; Liao, Lingwen; Chen, Jishi; Liu, Xu; Luo, Yi; Wang, Chengming; Wei, Shiqiang; Wu, Zhikun

    2016-09-12

    The structural features that render gold nanoclusters intrinsically fluorescent are currently not well understood. To address this issue, highly fluorescent gold nanoclusters have to be synthesized, and their structures must be determined. We herein report the synthesis of three fluorescent Au24 (SR)20 nanoclusters (R=C2 H4 Ph, CH2 Ph, or CH2 C6 H4 (t) Bu). According to UV/Vis/NIR, differential pulse voltammetry (DPV), and X-ray absorption fine structure (XAFS) analysis, these three nanoclusters adopt similar structures that feature a bi-tetrahedral Au8 kernel protected by four tetrameric Au4 (SR)5 motifs. At least two structural features are responsible for the unusual fluorescence of the Au24 (SR)20 nanoclusters: Two pairs of interlocked Au4 (SR)5 staples reduce the vibration loss, and the interactions between the kernel and the thiolate motifs enhance electron transfer from the ligand to the kernel moiety through the Au-S bonds, thereby enhancing the fluorescence. This work provides some clarification of the structure-fluorescence relationship of such clusters. PMID:27529838

  2. Segmented instrumentation tube including a locking sleeve for interlocking the segments of the instrumentation tube

    DOEpatents

    Obermeyer, Franklin D.

    1993-01-01

    Segmented instrumentation tube including a locking sleeve for interlocking the segments of the instrumentation tube, so that the threaded ends of the instrumentation tube do not unthread when subjected to vibration, such an instrumentation tube being suitable for use in a nuclear reactor pressure vessel. The instrumentation tube has a first member having a threaded end portion that has a plurality of first holes circumferentially around the outside surface thereof. The instrumentation tube also has a second member having a threaded end portion that has a plurality of second holes circumferentially around the outside surface thereof. The threads of the second member are caused to threadably engage the threads of the first member for defining a threaded joint therebetween. A sleeve having an inside surface surrounds the end portion of the first member and the end portion of the second member and thus surrounds the threaded joint. The sleeve includes a plurality of first projections and second projections that outwardly extend from the inside surface to engage the first holes and the second holes, respectively. The outside surface of the sleeve is crimped or swaged at the locations of the first projections and second projections such that the first projections and the second projections engage their respective holes. In this manner, independent rotation of the first member with respect to the second member is prevented, so that the instrumentation tube will not unthread at its threaded joint.

  3. Segmented instrumentation tube including a locking sleeve for interlocking the segments of the instrumentation tube

    DOEpatents

    Obermeyer, F.D.

    1993-11-16

    Segmented instrumentation tube including a locking sleeve for interlocking the segments of the instrumentation tube, so that the threaded ends of the instrumentation tube do not unthread when subjected to vibration, such an instrumentation tube being suitable for use in a nuclear reactor pressure vessel. The instrumentation tube has a first member having a threaded end portion that has a plurality of first holes circumferentially around the outside surface thereof. The instrumentation tube also has a second member having a threaded end portion that has a plurality of second holes circumferentially around the outside surface thereof. The threads of the second member are caused to threadably engage the threads of the first member for defining a threaded joint there between. A sleeve having an inside surface surrounds the end portion of the first member and the end portion of the second member and thus surrounds the threaded joint. The sleeve includes a plurality of first projections and second projections that outwardly extend from the inside surface to engage the first holes and the second holes, respectively. The outside surface of the sleeve is crimped or swaged at the locations of the first projections and second projections such that the first projections and the second projections engage their respective holes. In this manner, independent rotation of the first member with respect to the second member is prevented, so that the instrumentation tube will not unthread at its threaded joint. 10 figures.

  4. Activity systems in the inquiry classroom

    NASA Astrophysics Data System (ADS)

    Wortham, Donald William

    Inquiry science, as called for by reform-minded organizations such as the National Research Council (1996), offers a platform with the potential for introducing all students to the practice of science while maintaining focus on key concepts and theories. This project followed two small groups as they completed an inquiry unit on genetics at a Midwestern high school. I investigated whether levels of student-to-teacher, student-to-student, student-apparatus, and student-concept connections were approximately equal across all students in each of the two groups. I found differences among students in levels of student-to-teacher, student-to-student, and student-concept connections. From a situated idiopathic perspective, these differences may indicate different levels of opportunity-to-learn. At a more abstract (nomothetic) level, these differences may be due to emergent divisions of labor (roles) within the two groups. From the perspective of Activity Theory (Leont'ev, 1978; Engestrom, 1987), roles serve as important mediators that simultaneously allow the social unit to accomplish its objectives, while shaping the development of participants. I describe three roles that capture modes of participation for students interacting in the small groups, and that may contribute to what Engestrom (2001) calls subject-producing activity systems: networked contributor, social member, and isolate. This paper also describes tools for teachers and researchers to use in identifying levels of mediation and roles as they occur in small groups.

  5. ROVER: A prototype active vision system

    NASA Astrophysics Data System (ADS)

    Coombs, David J.; Marsh, Brian D.

    1987-08-01

    The Roving Eyes project is an experiment in active vision. We present the design and implementation of a prototype that tracks colored balls in images from an on-line charge coupled device (CCD) camera. Rover is designed to keep up with its rapidly changing environment by handling best and average case conditions and ignoring the worst case. This allows Rover's techniques to be less sophisticated and consequently faster. Each of Rover's major functional units is relatively isolated from the others, and an executive which knows all the functional units directs the computation by deciding which jobs would be most effective to run. This organization is realized with a priority queue of jobs and their arguments. Rover's structure not only allows it to adapt its strategy to the environment, but also makes the system extensible. A capability can be added to the system by adding a functional module with a well defined interface and by modifying the executive to make use of the new module. The current implementation is discussed in the appendices.

  6. Learning Organization Profile of Educational Hospitals in Iran: Practice of Organizational Interlocking Systems

    PubMed Central

    Mohebbifar, Rafat; Hashemi, Hassan Jahani; Rajaee, Roya; Najafi, Marziye; Etedal, Mahbobeh GH

    2015-01-01

    Background: Organizational learning has been identified as necessary for different organizations to improve their performance in the changing and competitive environment. Purpose: The main purpose of this research was to specify the learning organization profile of educational and health centers of Tehran and Qazvin Universities of Medical Sciences in Iran. Methodology: The present research was conducted using a cross-sectional method in the academic year of 2013-2014. A staff of 530 from educational hospitals subordinated to Tehran and Qazvin universities of medical sciences participated in the research. The participants were selected using stratified random sampling. That is to say, a random sample of a proportionate size was selected from each hospital. The instrument for data collection was a Likert-scale questionnaire involving 50 items. The statistical techniques of ANOVA, t-test, Chi-square, correlation coefficients (Pearson and Spearman), and regression were utilized to analyze the data. All of them were performed using the Statistical Package for Social Sciences (SPSS) 16.0 for windows. Result: The results indicated that 449 of participants (84.7%) had a B.S. degree and 78 of them (14.7%) had an M.S. or a Ph.D. degree. Among the fivefold dimensions of “Learning Organization” model (Learning, Organization, People, Knowledge, and Technology) in comparison of the two universities, the “people” dimension was the highest-rated dimension with the mean rating of 25.71±8.36 and the “learning” dimension was the lowest-rated dimension with the mean of 25.35±8.04. Comparison between the two universities yielded the result that educational hospitals in Tehran University of medical sciences with the rating of 126.56 had a more complete profile than that of educational hospitals in Qazvin university of medical sciences with the rating of 122.23. Conclusion: The hospitals of the two above-mentioned universities were, to a great extent, far from the characteristics of Learning Organization. In light of the massive mission of these centers to maintain and improve the community health and to train the skilled labor force, the centers should embark on updating the data and institutionalizing learning. Furthermore, to modify staff’s behavior and performance and to achieve their goals, they should accentuate the importance of acquiring, creating, and transferring knowledge. PMID:26156903

  7. Strong Is the Silence: Challenging Interlocking Systems of Privilege and Oppression in Mathematics Teacher Education

    ERIC Educational Resources Information Center

    Herbel-Eisenmann, Beth; Bartell, Tonya Gau; Breyfogle, M. Lynn; Bieda, Kristen; Crespo, Sandra; Dominguez, Higinio; Drake, Corey

    2013-01-01

    In this essay, the authors provide a rationale for the need to break the silence of privilege and oppression in mathematics education. They begin by providing a brief rationale from their personal and professional perspectives, which includes background about planning and executing the Privilege and Oppression in the Mathematics Preparation of…

  8. Preliminary design activities for solar heating and cooling systems

    NASA Technical Reports Server (NTRS)

    1978-01-01

    Information on the development of solar heating and cooling systems is presented. The major emphasis is placed on program organization, system size definition, site identification, system approaches, heat pump and equipment design, collector procurement, and other preliminary design activities.

  9. Activity Systems and Moral Reasoning: An Intervention Study

    ERIC Educational Resources Information Center

    Wardi, Eva; Helkama, Klaus

    2015-01-01

    Seventeen social educator students were taught to analyze their work activity by means of a Vygotsky-inspired method, drawing on Engeström's notion of an activity system. The method aimed at increasing the consciousness of the students of the structure of work activity system. The participants wrote two accounts of their field-work practice…

  10. New approaches to enhance active steering system functionalities: preliminary results

    NASA Astrophysics Data System (ADS)

    Serarslan, Benan

    2014-09-01

    An important development of the steering systems in general is active steering systems like active front steering and steer-by-wire systems. In this paper the current functional possibilities in application of active steering systems are explored. A new approach and additional functionalities are presented that can be implemented to the active steering systems without additional hardware such as new sensors and electronic control units. Commercial active steering systems are controlling the steering angle depending on the driving situation only. This paper introduce methods for enhancing active steering system functionalities depending not only on the driving situation but also vehicle parameters like vehicle mass, tyre and road condition. In this regard, adaptation of the steering ratio as a function of above mentioned vehicle parameters is presented with examples. With some selected vehicle parameter changes, the reduction of the undesired influences on vehicle dynamics of these parameter changes has been demonstrated theoretically with simulations and with real-time driving measurements.

  11. Process of activation of a palladium catalyst system

    DOEpatents

    Sobolevskiy, Anatoly; Rossin, Joseph A.; Knapke, Michael J.

    2011-08-02

    Improved processes for activating a catalyst system used for the reduction of nitrogen oxides are provided. In one embodiment, the catalyst system is activated by passing an activation gas stream having an amount of each of oxygen, water vapor, nitrogen oxides, and hydrogen over the catalyst system and increasing a temperature of the catalyst system to a temperature of at least 180.degree. C. at a heating rate of from 1-20.degree./min. Use of activation processes described herein leads to a catalyst system with superior NOx reduction capabilities.

  12. A Hybrid Activity System as Educational Innovation

    ERIC Educational Resources Information Center

    Yamazumi, Katsuhiro

    2008-01-01

    This article analyzes a hybrid after-school learning activity for children called "New School" (NS). NS is an inter-institutional, collaborative project based on a partnership between a university and local elementary schools that also involves other social actors and institutions. Using a framework of third generation activity theory, the article…

  13. Active fluidization in dense glassy systems.

    PubMed

    Mandal, Rituparno; Bhuyan, Pranab Jyoti; Rao, Madan; Dasgupta, Chandan

    2016-07-20

    Dense soft glasses show strong collective caging behavior at sufficiently low temperatures. Using molecular dynamics simulations of a model glass former, we show that the incorporation of activity or self-propulsion, f0, can induce cage breaking and fluidization, resulting in the disappearance of the glassy phase beyond a critical f0. The diffusion coefficient crosses over from being strongly to weakly temperature dependent as f0 is increased. In addition, we demonstrate that activity induces a crossover from a fragile to a strong glass and a tendency of active particles to cluster. Our results are of direct relevance to the collective dynamics of dense active colloidal glasses and to recent experiments on tagged particle diffusion in living cells. PMID:27380935

  14. Active vibration control of lightweight floor systems

    NASA Astrophysics Data System (ADS)

    Baader, J.; Fontana, M.

    2016-04-01

    Wide-span and lightweight floors are often prone to structural vibrations due to their low resonance frequency and poor material damping. Their dynamic behaviour can be improved using passive, semi-active or active vibration control devices. The following article proposes a novel method for the controller synthesis for active vibration control. An existing passive TMD (tuned mass damper) is modelled and equipped with an actuator in order to provide more efficient damping. Using an iterative optimization approach under constraints, an optimal controller is found which minimizes a quadratic cost function in frequency domain. A simulation of an existing test bench shows that the active vibration control device is able to provide increased damping compared to the passive TMD.

  15. Description of data base management systems activities

    NASA Technical Reports Server (NTRS)

    1983-01-01

    One of the major responsibilities of the JPL Computing and Information Services Office is to develop and maintain a JPL plan for providing computing services to the JPL management and administrative community that will lead to improved productivity. The CISO plan to accomplish this objective has been titled 'Management and Administrative Support Systems' (MASS). The MASS plan is based on the continued use of JPL's IBM 3032 Computer system for administrative computing and for the MASS functions. The current candidate administrative Data Base Management Systems required to support the MASS include ADABASE, Cullinane IDMS and TOTAL. Previous uses of administrative Data Base Systems have been applied to specific local functions rather than in a centralized manner with elements common to the many user groups. Limited capacity data base systems have been installed in microprocessor based office automation systems in a few Project and Management Offices using Ashton-Tate dBASE II. These experiences plus some other localized in house DBMS uses have provided an excellent background for developing user and system requirements for a single DBMS to support the MASS program.

  16. Acidosis activates complement system in vitro.

    PubMed Central

    Emeis, M; Sonntag, J; Willam, C; Strauss, E; Walka, M M; Obladen, M

    1998-01-01

    We investigated the in vitro effect of different forms of acidosis (pH 7.0) on the formation of anaphylatoxins C3a and C5a. Metabolic acidosis due to addition of hydrochloric acid (10 micromol/ml blood) or lactic acid (5.5 micromol/ml) to heparin blood (N=12) caused significant activation of C3a and C5a compared to control (both p=0.002). Respiratory acidosis activated C3a (p=0.007) and C5a (p=0.003) compared to normocapnic controls. Making blood samples with lactic acidosis hypocapnic resulted in a median pH of 7.37. In this respiratory compensated metabolic acidosis, C3a and C5a were not increased. These experiments show that acidosis itself and not lactate trigger for activation of complement components C3 and C5. PMID:9927235

  17. Antibacterial activity of four dentin bonding systems.

    PubMed

    Herrera, M; Carrión, P; Bravo, M; Castillo, A

    2000-08-01

    The antibacterial action of bonding systems Gluma 2000, Syntac, Prisma Universal Bond 3, Scotchbond Multipurpose and Prime-Bond was tested against 32 strains of the caries-producing bacteria Streptococcus spp., Lactobacillus spp., Actinomyces spp., Porphyromonas spp. and Clostridium spp. An agar plate diffusion method was used with chlorhexidine as the positive control. Assays were performed in triplicate for each component (primer and adhesive) of the bonding systems. All the adhesives were found to inhibit bacterial growth but with differences in their spectra of action. The sum action of the Scotchbond Multipurpose components were most inhibitory and Prime-Bond was found to be the least effective system.

  18. Hybrid energy storage systems utilizing redox active organic compounds

    SciTech Connect

    Wang, Wei; Xu, Wu; Li, Liyu; Yang, Zhenguo

    2015-09-08

    Redox flow batteries (RFB) have attracted considerable interest due to their ability to store large amounts of power and energy. Non-aqueous energy storage systems that utilize at least some aspects of RFB systems are attractive because they can offer an expansion of the operating potential window, which can improve on the system energy and power densities. One example of such systems has a separator separating first and second electrodes. The first electrode includes a first current collector and volume containing a first active material. The second electrode includes a second current collector and volume containing a second active material. During operation, the first source provides a flow of first active material to the first volume. The first active material includes a redox active organic compound dissolved in a non-aqueous, liquid electrolyte and the second active material includes a redox active metal.

  19. The active-passive continuous-wave terahertz imaging system

    NASA Astrophysics Data System (ADS)

    Dolganova, Irina N.; Zaytsev, Kirill I.; Metelkina, Anna A.; Yurchenko, Stanislav O.

    2016-08-01

    Active and passive terahertz (THz) imaging have recently become essential instruments of various THz applications. In this paper the active- and passive-mode THz imaging systems are studied and the hybrid active-passive THz imaging system is suggested. The concept of image contrast was used to compare the active and passive THz imaging results. In order to achieve better image quality the hybrid system is considered to be effective. The main advantage of the proposed system is the combination of the self-emitted radiation of the object with the back scattered source radiation. The experimental results demonstrate that the active-passive modality of THz imaging system allows retrieving maximum information about the object. An approach to synthesise the active-passive THz images was proposed using the false-color representation.

  20. Electricity/Electronics Systems. Laboratory Activities.

    ERIC Educational Resources Information Center

    Sutherland, Barbara, Ed.

    This electricity/electronics guide provides teachers with learning activities for secondary students. Introductory materials include an instructional planning outline and worksheet, an outline of essential elements, a list of objectives, a course description, and a content outline. The guide contains 35 modules on the following topics: electrical…

  1. MiSIS (Michigan Student Information System) Activities Manual.

    ERIC Educational Resources Information Center

    1979

    The Michigan Student Information System (MiSIS) is the student flow component of the Michigan Community College Occupational Education Evaluation System (MCCOEES), a comprehensive state-wide system for evaluating occupational education. The Michigan Student Information System (MiSIS) Activities Manual was designed to help college-level personnel…

  2. Radiation Safety Systems for Accelerator Facilities

    SciTech Connect

    James C. Liu; Jeffrey S. Bull; John Drozdoff; Robert May; Vaclav Vylet

    2001-10-01

    The Radiation Safety System (RSS) of an accelerator facility is used to protect people from prompt radiation hazards associated with accelerator operation. The RSS is a fully interlocked, engineered system with a combination of passive and active elements that are reliable, redundant, and fail-safe. The RSS consists of the Access Control System (ACS) and the Radiation Containment System (RCS). The ACS is to keep people away from the dangerous radiation inside the shielding enclosure. The RCS limits and contains the beam/radiation conditions to protect people from the prompt radiation hazards outside the shielding enclosure in both normal and abnormal operations. The complexity of a RSS depends on the accelerator and its operation, as well as associated hazard conditions. The approaches of RSS among different facilities can be different. This report gives a review of the RSS for accelerator facilities.

  3. Active annular-beam laser autocollimator system.

    PubMed

    Yoder, P R; Schlesinger, E R; Chickvary, J L

    1975-08-01

    An autocollimator using an axicon and a beam expander telescope to generate a 12.5-cm. o.d. annular beam of helium-neon laser light with high (25:1) diameter-to-width ratio has been developed. It is used with a two-axis, electromagnetically actuated mirror assembly to acquire automatically and maintain dynamically autocollimation from a nearby but separately mounted annular mirror. The servo system controls beam alignment even though angular vibratory motions of the annular mirror make it appear to tilt relative to the autocollimator as much as 7 mrad at frequencies below 300 Hz. This paper describes the optical system and the alignment sensing and control system.

  4. An active noise reduction system for aircrew helmets

    NASA Technical Reports Server (NTRS)

    Wheeler, P. D.; Rawlinson, D.; Pelc, S. F.; Dorey, T. P.

    1978-01-01

    An active noise reduction system was developed for use in aircrew flying helmets in which the acoustic noise field inside the ear defender is detected using a miniature microphone and an antiphase signal is fed back to a communications telephone within the ear defender. Performance of the active noise reduction system in a laboratory trial simulating flight conditions is shown to be satisfactory.

  5. Entry-Level Activities in System Consultation

    ERIC Educational Resources Information Center

    Hylander, Ingrid

    2014-01-01

    System-level consultation or organizational development in schools is an area in great need of theoretical models and definitions. The three articles in this special issue provide a unique learning opportunity not only for consultation across borders but also for consultation within the same nation. In my commentary, I limit my remarks to a few…

  6. Methodology for the systems engineering process. Volume 1: System functional activities

    NASA Technical Reports Server (NTRS)

    Nelson, J. H.

    1972-01-01

    Systems engineering is examined in terms of functional activities that are performed in the conduct of a system definition/design, and system development is described in a parametric analysis that combines functions, performance, and design variables. Emphasis is placed on identification of activities performed by design organizations, design specialty groups, as well as a central systems engineering organizational element. Identification of specific roles and responsibilities for doing functions, and monitoring and controlling activities within the system development operation are also emphasized.

  7. Activity-promoting gaming systems in exercise and rehabilitation.

    PubMed

    Taylor, Matthew J D; McCormick, Darren; Shawis, Teshk; Impson, Rebecca; Griffin, Murray

    2011-01-01

    Commercial activity-promoting gaming systems provide a potentially attractive means to facilitate exercise and rehabilitation. The Nintendo Wii, Sony EyeToy, Dance Dance Revolution, and Xbox Kinect are examples of gaming systems that use the movement of the player to control gameplay. Activity-promoting gaming systems can be used as a tool to increase activity levels in otherwise sedentary gamers and also be an effective tool to aid rehabilitation in clinical settings. Therefore, the aim of this current work is to review the growing area of activity-promoting gaming in the context of exercise, injury, and rehabilitation.

  8. A microscopic field theoretical approach for active systems

    NASA Astrophysics Data System (ADS)

    Alaimo, F.; Praetorius, S.; Voigt, A.

    2016-08-01

    We consider a microscopic modeling approach for active systems. The approach extends the phase field crystal (PFC) model and allows us to describe generic properties of active systems within a continuum model. The approach is validated by reproducing results obtained with corresponding agent-based and microscopic phase field models. We consider binary collisions, collective motion and vortex formation. For larger numbers of particles we analyze the coarsening process in active crystals and identify giant number fluctuation in a cluster formation process.

  9. MARS PATHFINDER PYRO SYSTEMS SWITCHING ACTIVITY

    NASA Technical Reports Server (NTRS)

    1996-01-01

    The Mars Pathfinder lander is subjected to a electrical and functional tests of its pyrotechic petal deployer system by Jet Propulsion Laboratory (JPL) engineers and technicians in KSC's Spacecraft Assembly and Encapsulation Facility (SAEF-2). In the background is the Pathfinder cruise stage, which the lander will be mated to once its functional tests are complete. The lander will remain attached to this stage during its six-to-seven-month journey to Mars. When the lander touches down on the surface of Mars next year, the pyrotechnic system will deploy its three petals open like a flower and allow the Sojourner autonomous rover to explore the Martian surface. The Mars Pathfinder is scheduled for launch aboard a Delta II expendable launch vehicle on Dec. 2, the beginning of a 24-day launch period. JPL is managing the Mars Pathfinder project for NASA.

  10. Motor Cortex Activity Organizes the Developing Rubrospinal System.

    PubMed

    Williams, Preston T J A; Martin, John H

    2015-09-30

    The corticospinal and rubrospinal systems function in skilled movement control. A key question is how do these systems develop the capacity to coordinate their motor functions and, in turn, if the red nucleus/rubrospinal tract (RN/RST) compensates for developmental corticospinal injury? We used the cat to investigate whether the developing rubrospinal system is shaped by activity-dependent interactions with the developing corticospinal system. We unilaterally inactivated M1 by muscimol microinfusion between postnatal weeks 5 and 7 to examine activity-dependent interactions and whether the RN/RST compensates for corticospinal tract (CST) developmental motor impairments and CST misprojections after M1 inactivation. We examined the RN motor map and RST cervical projections at 7 weeks of age, while the corticospinal system was inactivated, and at 14 weeks, after activity returned. During M1 inactivation, the RN on the same side showed normal RST projections and reduced motor thresholds, suggestive of precocious development. By contrast, the RN on the untreated/active M1 side showed sparse RST projections and an immature motor map. After M1 activity returned later in adolescent cat development, RN on the active M1/CST side continued to show a substantial loss of spinal terminations and an impaired motor map. RN/RST on the inactivated side regressed to a smaller map and fewer axons. Our findings suggest that the developing rubrospinal system is under activity-dependent regulation by the corticospinal system for establishing mature RST connections and RN motor map. The lack of RS compensation on the non-inactivated side can be explained by development of ipsilateral misprojections from the active M1 that outcompete the RST. Significance statement: Skilled movements reflect the activity of multiple descending motor systems and their interactions with spinal motor circuits. Currently, there is little insight into whether motor systems interact during development to

  11. Motor Cortex Activity Organizes the Developing Rubrospinal System

    PubMed Central

    Williams, Preston T.J.A.

    2015-01-01

    The corticospinal and rubrospinal systems function in skilled movement control. A key question is how do these systems develop the capacity to coordinate their motor functions and, in turn, if the red nucleus/rubrospinal tract (RN/RST) compensates for developmental corticospinal injury? We used the cat to investigate whether the developing rubrospinal system is shaped by activity-dependent interactions with the developing corticospinal system. We unilaterally inactivated M1 by muscimol microinfusion between postnatal weeks 5 and 7 to examine activity-dependent interactions and whether the RN/RST compensates for corticospinal tract (CST) developmental motor impairments and CST misprojections after M1 inactivation. We examined the RN motor map and RST cervical projections at 7 weeks of age, while the corticospinal system was inactivated, and at 14 weeks, after activity returned. During M1 inactivation, the RN on the same side showed normal RST projections and reduced motor thresholds, suggestive of precocious development. By contrast, the RN on the untreated/active M1 side showed sparse RST projections and an immature motor map. After M1 activity returned later in adolescent cat development, RN on the active M1/CST side continued to show a substantial loss of spinal terminations and an impaired motor map. RN/RST on the inactivated side regressed to a smaller map and fewer axons. Our findings suggest that the developing rubrospinal system is under activity-dependent regulation by the corticospinal system for establishing mature RST connections and RN motor map. The lack of RS compensation on the non-inactivated side can be explained by development of ipsilateral misprojections from the active M1 that outcompete the RST. SIGNIFICANCE STATEMENT Skilled movements reflect the activity of multiple descending motor systems and their interactions with spinal motor circuits. Currently, there is little insight into whether motor systems interact during development to

  12. Motor Cortex Activity Organizes the Developing Rubrospinal System.

    PubMed

    Williams, Preston T J A; Martin, John H

    2015-09-30

    The corticospinal and rubrospinal systems function in skilled movement control. A key question is how do these systems develop the capacity to coordinate their motor functions and, in turn, if the red nucleus/rubrospinal tract (RN/RST) compensates for developmental corticospinal injury? We used the cat to investigate whether the developing rubrospinal system is shaped by activity-dependent interactions with the developing corticospinal system. We unilaterally inactivated M1 by muscimol microinfusion between postnatal weeks 5 and 7 to examine activity-dependent interactions and whether the RN/RST compensates for corticospinal tract (CST) developmental motor impairments and CST misprojections after M1 inactivation. We examined the RN motor map and RST cervical projections at 7 weeks of age, while the corticospinal system was inactivated, and at 14 weeks, after activity returned. During M1 inactivation, the RN on the same side showed normal RST projections and reduced motor thresholds, suggestive of precocious development. By contrast, the RN on the untreated/active M1 side showed sparse RST projections and an immature motor map. After M1 activity returned later in adolescent cat development, RN on the active M1/CST side continued to show a substantial loss of spinal terminations and an impaired motor map. RN/RST on the inactivated side regressed to a smaller map and fewer axons. Our findings suggest that the developing rubrospinal system is under activity-dependent regulation by the corticospinal system for establishing mature RST connections and RN motor map. The lack of RS compensation on the non-inactivated side can be explained by development of ipsilateral misprojections from the active M1 that outcompete the RST. Significance statement: Skilled movements reflect the activity of multiple descending motor systems and their interactions with spinal motor circuits. Currently, there is little insight into whether motor systems interact during development to

  13. A fuselage/tank structure study for actively cooled hypersonic cruise vehicles: Active cooling system analysis

    NASA Technical Reports Server (NTRS)

    Stone, J. E.

    1975-01-01

    The effects of fuselage cross section and structural arrangement on the performance of actively cooled hypersonic cruise vehicles are investigated. An active cooling system which maintains the aircraft's entire surface area at temperatures below 394 K at Mach 6 is developed along with a hydrogen fuel tankage thermal protection system. Thermodynamic characteristics of the actively cooled thermal protection systems established are summarized. Design heat loads and coolant flowrate requirements are defined for each major structural section and for the total system. Cooling system weights are summarized at the major component level. Conclusions and recommendations are included.

  14. Close Intramedullary Interlocking Nailing Versus Locking Compression Plating In the Treatment of Closed Fracture Shaft of the Tibia.

    PubMed

    Kundu, I K; Datta, N K; Chowdhury, A Z; Das, K P; Tarik, M M; Faisal, M A

    2016-07-01

    Fracture of tibial shaft is the commonest site of long bone fractures due to its superficial location involving young or middle-age people. Proper management is an important issue regarding the future effective movements. In this study patients were grouped in closed Intra medullary interlocking nailing and locking compression plating. Post-operative follow up at 2 weeks, 6 weeks, 12 weeks and 3 months thereafter up to 6 months were done. Each of the patients was evaluated clinically and radiologically by tucker criteria of Tuker et al. Patients were assessed for pain on full weight bearing and kneeling, shortening and range of motion of knee and ankle joints. Radiological assessment for union of fracture, alignment of fracture and angulations and position of nail and screws and infection were observed during follow up. A total number of 32 patients were selected but only 27 patients were available for follow up for a period of 6 months. They were grouped into Group A, consisting of 15 patients who took the treatment in the form of closed intramedullary interlocking nailing and Group B, consisting of 12 patients those underwent ORIF with locking compression plating. In both of the groups Motor Vehicle Accident was the main mechanism of trauma. Fracture involving the middle 3rd of the tibia is common in both the groups. During post-operative follow up, four patients in Group A complained anterior knee pain, one patient in Group B had superficial infection, most of the patients had no restriction of movement in the ankle and knee joints and a single patient in Group B showed 1.5cm shortening of the lower limb. Period of hospital stay and fracture union time were less in Group A, which was statistically significant. Both groups showed excellent result with minimum complications. So this study permits to conclude that close IM interlocking nailing and open reduction and internal fixation by locking compression plating is equally effective for the management of close

  15. Tailored Surface Treatment of 3D Printed Porous Ti6Al4V by Microarc Oxidation for Enhanced Osseointegration via Optimized Bone In-Growth Patterns and Interlocked Bone/Implant Interface.

    PubMed

    Xiu, Peng; Jia, Zhaojun; Lv, Jia; Yin, Chuan; Cheng, Yan; Zhang, Ke; Song, Chunli; Leng, Huijie; Zheng, Yufeng; Cai, Hong; Liu, Zhongjun

    2016-07-20

    3D printed porous titanium (Ti) holds enormous potential for load-bearing orthopedic applications. Although the 3D printing technique has good control over the macro-sturctures of porous Ti, the surface properties that affect tissue response are beyond its control, adding the need for tailored surface treatment to improve its osseointegration capacity. Here, the one step microarc oxidation (MAO) process was applied to a 3D printed porous Ti6Al4V (Ti64) scaffold to endow the scaffold with a homogeneous layer of microporous TiO2 and significant amounts of amorphous calcium-phosphate. Following the treatment, the porous Ti64 scaffolds exhibited a drastically improved apatite forming ability, cyto-compatibility, and alkaline phosphatase activity. In vivo test in a rabbit model showed that the bone in-growth at the untreated scaffold was in a pattern of distance osteogenesis by which bone formed only at the periphery of the scaffold. In contrast, the bone in-growth at the MAO-treated scaffold exhibited a pattern of contact osteogenesis by which bone formed in situ on the entire surface of the scaffold. This pattern of bone in-growth significantly increased bone formation both in and around the scaffold possibly through enhancement of bone formation and disruption of bone remodeling. Moreover, the implant surface of the MAO-treated scaffold interlocked with the bone tissues through the fabricated microporous topographies to generate a stronger bone/implant interface. The increased osteoinetegration strength was further proven by a push out test. MAO exhibits a high efficiency in the enhancement of osteointegration of porous Ti64 via optimizing the patterns of bone in-growth and bone/implant interlocking. Therefore, post-treatment of 3D printed porous Ti64 with MAO technology might open up several possibilities for the development of bioactive customized implants in orthopedic applications. PMID:27341499

  16. Tailored Surface Treatment of 3D Printed Porous Ti6Al4V by Microarc Oxidation for Enhanced Osseointegration via Optimized Bone In-Growth Patterns and Interlocked Bone/Implant Interface.

    PubMed

    Xiu, Peng; Jia, Zhaojun; Lv, Jia; Yin, Chuan; Cheng, Yan; Zhang, Ke; Song, Chunli; Leng, Huijie; Zheng, Yufeng; Cai, Hong; Liu, Zhongjun

    2016-07-20

    3D printed porous titanium (Ti) holds enormous potential for load-bearing orthopedic applications. Although the 3D printing technique has good control over the macro-sturctures of porous Ti, the surface properties that affect tissue response are beyond its control, adding the need for tailored surface treatment to improve its osseointegration capacity. Here, the one step microarc oxidation (MAO) process was applied to a 3D printed porous Ti6Al4V (Ti64) scaffold to endow the scaffold with a homogeneous layer of microporous TiO2 and significant amounts of amorphous calcium-phosphate. Following the treatment, the porous Ti64 scaffolds exhibited a drastically improved apatite forming ability, cyto-compatibility, and alkaline phosphatase activity. In vivo test in a rabbit model showed that the bone in-growth at the untreated scaffold was in a pattern of distance osteogenesis by which bone formed only at the periphery of the scaffold. In contrast, the bone in-growth at the MAO-treated scaffold exhibited a pattern of contact osteogenesis by which bone formed in situ on the entire surface of the scaffold. This pattern of bone in-growth significantly increased bone formation both in and around the scaffold possibly through enhancement of bone formation and disruption of bone remodeling. Moreover, the implant surface of the MAO-treated scaffold interlocked with the bone tissues through the fabricated microporous topographies to generate a stronger bone/implant interface. The increased osteoinetegration strength was further proven by a push out test. MAO exhibits a high efficiency in the enhancement of osteointegration of porous Ti64 via optimizing the patterns of bone in-growth and bone/implant interlocking. Therefore, post-treatment of 3D printed porous Ti64 with MAO technology might open up several possibilities for the development of bioactive customized implants in orthopedic applications.

  17. Active synchronization between two different chaotic dynamical system

    NASA Astrophysics Data System (ADS)

    Maheri, M.; Arifin, N. Md; Ismail, F.

    2015-05-01

    In this paper we investigate on the synchronization problem between two different chaotic dynamical system based on the Lyapunov stability theorem by using nonlinear control functions. Active control schemes are used for synchronization Liu system as drive and Rossler system as response. Numerical simulation by using Maple software are used to show effectiveness of the proposed schemes.

  18. 49 CFR 234.225 - Activation of warning system.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... seconds warning time for the normal operation of through trains before the grade crossing is occupied by... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION GRADE CROSSING SAFETY, INCLUDING SIGNAL SYSTEMS, STATE ACTION PLANS....225 Activation of warning system. A highway-rail grade crossing warning system shall be maintained...

  19. 49 CFR 234.225 - Activation of warning system.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... seconds warning time for the normal operation of through trains before the grade crossing is occupied by... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION GRADE CROSSING SAFETY, INCLUDING SIGNAL SYSTEMS, STATE ACTION PLANS....225 Activation of warning system. A highway-rail grade crossing warning system shall be maintained...

  20. Active synchronization between two different chaotic dynamical system

    SciTech Connect

    Maheri, M.; Arifin, N. Md; Ismail, F.

    2015-05-15

    In this paper we investigate on the synchronization problem between two different chaotic dynamical system based on the Lyapunov stability theorem by using nonlinear control functions. Active control schemes are used for synchronization Liu system as drive and Rossler system as response. Numerical simulation by using Maple software are used to show effectiveness of the proposed schemes.

  1. NASA's UAS [Unmanned Aircraft Systems] Related Activities

    NASA Technical Reports Server (NTRS)

    Bauer, Jeffrey

    2012-01-01

    NASA continues to operate all sizes of UAS in all classes of airspace both domestically and internationally. Missions range from highly complex operations in coordination with piloted aircraft, ground, and space systems in support of science objectives to single aircraft operations in support of aeronautics research. One such example is a scaled commercial transport aircraft being used to study recovery techniques due to large upsets. NASA's efforts to support routine UAS operations continued on several fronts last year. At the national level in the United States (U.S.), NASA continued its support of the UAS Executive Committee (ExCom) comprised of the Federal Aviation Administration (FAA), Department of Defense (DoD), Department of Homeland Security (DHS), and NASA. The committee was formed in recognition of the need of UAS operated by these agencies to access to the National Airspace System (NAS) to support operational, training, development and research requirements. Recommendations were received on how to operate both manned and unmanned aircraft in class D airspace and plans are being developed to validate and implement those recommendations. In addition the UAS ExCom has begun developing recommendations for how to achieve routine operations in remote areas as well as for small UAS operations in class G airspace. As well as supporting the UAS ExCom, NASA is a participant in the recently formed Aviation Rule Making Committee for UAS. This committee, established by the FAA, is intended to propose regulatory guidance which would enable routine civil UAS operations. As that effort matures NASA stands ready to supply the necessary technical expertise to help that committee achieve its objectives. By supporting both the UAS ExCom and UAS ARC, NASA is positioned to provide its technical expertise across the full spectrum of UAS airspace access related topic areas. The UAS NAS Access Project got underway this past year under the leadership of NASA s Aeronautics

  2. Active and intelligent packaging systems for a modern society.

    PubMed

    Realini, Carolina E; Marcos, Begonya

    2014-11-01

    Active and intelligent packaging systems are continuously evolving in response to growing challenges from a modern society. This article reviews: (1) the different categories of active and intelligent packaging concepts and currently available commercial applications, (2) latest packaging research trends and innovations, and (3) the growth perspectives of the active and intelligent packaging market. Active packaging aiming at extending shelf life or improving safety while maintaining quality is progressing towards the incorporation of natural active agents into more sustainable packaging materials. Intelligent packaging systems which monitor the condition of the packed food or its environment are progressing towards more cost-effective, convenient and integrated systems to provide innovative packaging solutions. Market growth is expected for active packaging with leading shares for moisture absorbers, oxygen scavengers, microwave susceptors and antimicrobial packaging. The market for intelligent packaging is also promising with strong gains for time-temperature indicator labels and advancements in the integration of intelligent concepts into packaging materials. PMID:25034453

  3. Active control system for high speed windmills

    DOEpatents

    Avery, D.E.

    1988-01-12

    A pump stroke is matched to the operating speed of a high speed windmill. The windmill drives a hydraulic pump for a control. Changes in speed of a wind driven shaft open supply and exhaust valves to opposite ends of a hydraulic actuator to lengthen and shorten an oscillating arm thereby lengthening and shortening the stroke of an output pump. Diminishing wind to a stall speed causes the valves to operate the hydraulic cylinder to shorten the oscillating arm to zero. A pressure accumulator in the hydraulic system provides the force necessary to supply the hydraulic fluid under pressure to drive the actuator into and out of the zero position in response to the windmill shaft speed approaching and exceeding windmill stall speed. 4 figs.

  4. Active control system for high speed windmills

    DOEpatents

    Avery, Don E.

    1988-01-01

    A pump stroke is matched to the operating speed of a high speed windmill. The windmill drives a hydraulic pump for a control. Changes in speed of a wind driven shaft open supply and exhaust valves to opposite ends of a hydraulic actuator to lengthen and shorten an oscillating arm thereby lengthening and shortening the stroke of an output pump. Diminishing wind to a stall speed causes the valves to operate the hydraulic cylinder to shorten the oscillating arm to zero. A pressure accumulator in the hydraulic system provides the force necessary to supply the hydraulic fluid under pressure to drive the actuator into and out of the zero position in response to the windmill shaft speed approaching and exceeding windmill stall speed.

  5. An Active RFID Accountability System (RAS) for Constrained Wireless Environments

    SciTech Connect

    Barker, Alan M; Hanson, Gregory R; Sexton, Angela Kay; Jones Jr, J P; Freer, Eva B; Sjoreen, Andrea L

    2011-01-01

    A team from Oak Ridge National Laboratory (ORNL) has developed an RFID Accountability System (RAS) that allows items with active RFID tags to be tracked in environments where tags may not be able to transmit their location continuously. The system uses activators that transmit a short range signal. Active RFID tags are in a sleep state until they encounter an activator. Then they transmit a signal that is picked up by the antennas installed throughout the building. This paper presents the theory of operation, application areas, lessons learned, and key features developed over the course of seven years of development and use.

  6. Functional Status of the Serotonin 5-HT2C Receptor (5-HT2CR) Drives Interlocked Phenotypes that Precipitate Relapse-Like Behaviors in Cocaine Dependence

    PubMed Central

    Anastasio, Noelle C; Stutz, Sonja J; Fox, Robert G; Sears, Robert M; Emeson, Ronald B; DiLeone, Ralph J; O'Neil, Richard T; Fink, Latham H; Li, Dingge; Green, Thomas A; Gerard Moeller, F; Cunningham, Kathryn A

    2014-01-01

    Relapse vulnerability in cocaine dependence is rooted in genetic and environmental determinants, and propelled by both impulsivity and the responsivity to cocaine-linked cues (‘cue reactivity'). The serotonin (5-hydroxytryptamine, 5-HT) 5-HT2C receptor (5-HT2CR) within the medial prefrontal cortex (mPFC) is uniquely poised to serve as a strategic nexus to mechanistically control these behaviors. The 5-HT2CR functional capacity is regulated by a number of factors including availability of active membrane receptor pools, the composition of the 5-HT2CR macromolecular protein complex, and editing of the 5-HT2CR pre-mRNA. The one-choice serial reaction time (1-CSRT) task was used to identify impulsive action phenotypes in an outbred rat population before cocaine self-administration and assessment of cue reactivity in the form of lever presses reinforced by the cocaine-associated discrete cue complex during forced abstinence. The 1-CSRT task reliably and reproducibly identified high impulsive (HI) and low impulsive (LI) action phenotypes; HI action predicted high cue reactivity. Lower cortical 5-HT2CR membrane protein levels concomitant with higher levels of 5-HT2CR:postsynaptic density 95 complex distinguished HI rats from LI rats. The frequency of edited 5-HT2CR mRNA variants was elevated with the prediction that the protein population in HI rats favors those isoforms linked to reduced signaling capacity. Genetic loss of the mPFC 5-HT2CR induced aggregate impulsive action/cue reactivity, suggesting that depressed cortical 5-HT2CR tone confers vulnerability to these interlocked behaviors. Thus, impulsive action and cue reactivity appear to neuromechanistically overlap in rodents, with the 5-HT2CR functional status acting as a neural rheostat to regulate, in part, the intersection between these vulnerability behaviors. PMID:23939424

  7. [Activities of System Studies and Simulation, Inc.

    NASA Technical Reports Server (NTRS)

    2004-01-01

    Contents include the following: 1. Launch Vehicle Interface Work Performed: a. S3 provided to KSC the new launch inclination targets needed for the April '04 launch date. 2. Prelaunch operations work performed: a. S3 updated the staffing plan for MSFC on-console personnel\\during the Final Countdown prior to launch. 3. Software Assessment Work Performed: a. S3 evaluated and recommended approval for Program Control Board (PCB) proposed change 649 for ground software changes, as well as change 650 and 650A for Stored Program Commands. 4. Education and Public Outreach Work Performed: a. S3 continues to coordinate the effort for the design and fabrication of scale models of the GP-3 for use at the launch site, education forums, and management/technical briefings. S3 also prepared a Change Request for additional funds needed for fabrication of additional scale models. S3 drafted the planned uses of these models, including the possibility of participation in the Boston, MA showings of the traveling Einstein Exhibit. 5. Program Management Support Work Performed: a. S3 prepared the input for and closed three MSFC Centerwide Action Item Tracking Systems (CAITS) actions during this period.

  8. Positive And Negative Feedback Loops Coupled By Common Transcription Activator And Repressor

    NASA Astrophysics Data System (ADS)

    Sielewiesiuk, Jan; Łopaciuk, Agata

    2015-03-01

    Dynamical systems consisting of two interlocked loops with negative and positive feedback have been studied using the linear analysis of stability and numerical solutions. Conditions for saddle-node bifurcation were formulated in a general form. Conditions for Hopf bifurcations were found in a few symmetrical cases. Auto-oscillations, when they exist, are generated by the negative feedback repressive loop. This loop determines the frequency and amplitude of oscillations. The positive feedback loop of activation slightly modifies the oscillations. Oscillations are possible when the difference between Hilll's coefficients of the repression and activation is sufficiently high. The highly cooperative activation loop with a fast turnover slows down or even makes the oscillations impossible. The system under consideration can constitute a component of epigenetic or enzymatic regulation network.

  9. Interlocked chiral/polar domain walls and large optical rotation in Ni{sub 3}TeO{sub 6}

    SciTech Connect

    Wang, Xueyun; Huang, Fei-Ting; Yang, Junjie; Oh, Yoon Seok; Cheong, Sang-Wook

    2015-07-01

    Chirality, i.e., handedness, pervades much of modern science from elementary particles, DNA-based biology to molecular chemistry; however, most of the chirality-relevant materials have been based on complex molecules. Here, we report inorganic single-crystalline Ni{sub 3}TeO{sub 6}, forming in a corundum-related R3 structure with both chirality and polarity. These chiral Ni{sub 3}TeO{sub 6} single crystals exhibit a large optical specific rotation (α)—1355° dm{sup −1} cm{sup 3} g{sup −1}. We demonstrate, for the first time, that in Ni{sub 3}TeO{sub 6}, chiral and polar domains form an intriguing domain pattern, resembling a radiation warning sign, which stems from interlocked chiral and polar domain walls through lowering of the wall energy.

  10. Redesigning the District Operating System

    ERIC Educational Resources Information Center

    Hodas, Steven

    2015-01-01

    In this paper, we look at the inner workings of a school district through the lens of the "district operating system (DOS)," a set of interlocking mutually-reinforcing modules that includes functions like procurement, contracting, data and IT policy, the general counsel's office, human resources, and the systems for employee and family…

  11. Comparative study between two different active flutter suppression systems

    NASA Technical Reports Server (NTRS)

    Nissim, E.

    1978-01-01

    An activated leading-edge (LE)-tailing-edge (TE) control system is applied to a drone aircraft with the objective of enabling the drone to fly subsonically at dynamic pressures which are 44% above the open-loop flutter dynamic pressure. The control synthesis approach is based on the aerodynamic energy concept and it incorporates recent developments in this area. A comparison is made between the performance of the activated LE-TE control system and the performance of a TE control system, analyzed in a previous work. The results obtained indicate that although all the control systems achieve the flutter suppression objectives, the TE control system appears to be somewhat superior to the LE-TE control system, in this specific application. This superiority is manifested through reduced values of control surface activity over a wide range of flight conditions.

  12. [The informative mechanisms of systemic organization of psychic activity].

    PubMed

    Sudakov, K V

    2012-01-01

    In this review on the basis of functional systems theory developed by P. Anokhin theoretical approaches to informative mechanisms of systemic organization of psychic activity are presented. Author formulates the conception on discrete system quantums of psychic and behavioral activity from needs to its satisfaction and develops its informative equivalents. It was shown that informative equivalents of needs and its satisfaction are reflected in structures of action acceptors in the form of dynamic informative images. On the basis of acceptors of results of action informative systemic quantums are developed which constantly control its manifestation in behavioral systemic quantums. Informative systemic quantums are extracted in advance by predominate motivations and are associated with negative emotions of needs and positive emotions of their satisfaction. The content of this review confirms I.P. Pavlov's foresight on possible confluence of material and idealistic processes in psychic human activity.

  13. Space Activism as an Epiphanic Belief System

    NASA Technical Reports Server (NTRS)

    Mendell, Wendell

    2006-01-01

    Years of interaction with young people in the space industry and in space activists groups led to my observation that many such individuals can cite a quite specific life event that triggered a life-long interest in or commitment to creating a space future. I am particularly intrigued by parallels between such experiences and the phenomenon of epiphanic experiences among committed Christians. I see analogies between the puzzlement among space activists and among Christian groups as to the reasons for so many people being "unbelievers." At a small international meeting on lunar exploration in 2003, I heard two separate lunch speakers cite such personal experiences. At the beginning of a break in that meeting, I grabbed the microphone from the chairman and asked each person to write down on a pad by his chair whether or not he (or she) had experienced a specific event that led to their involvement in space. If the answer was positive, I asked for a brief narrative, for their age at the time, and for their current age. I received 53 submissions, 20% of which simply stated that their involvement in space exploration was happenstance. (Apollo astronaut John Young was among these.) The other 80% of the submissions had specific stories. The ages at the time of the epiphany ranged from 4 to 47; and their current ages ranged from 22 to 78. I will present a high-level characterization of these inputs. Interest in space exploration as a form of belief system is consistent with choosing NASA goals for the purpose of inspiration and with phenomena such as the "Overview Effect". More research might explore what form the transcendent experience takes and whether it might be associated with feelings of universal connection such as the noosphere or "The Force". From a pragmatic point of view, outreach strategies for exploration should focus on giving individuals access to personal, potentially transformational experiences as opposed to astronaut talks at civic clubs.

  14. Measurement of the ground-state distributions in bistable mechanically interlocked molecules using slow scan rate cyclic voltammetry

    PubMed Central

    Fahrenbach, Albert C.; Barnes, Jonathan C.; Li, Hao; Benítez, Diego; Basuray, Ashish N.; Fang, Lei; Sue, Chi-Hau; Barin, Gokhan; Dey, Sanjeev K.; Goddard, William A.; Stoddart, J. Fraser

    2011-01-01

    In donor–acceptor mechanically interlocked molecules that exhibit bistability, the relative populations of the translational isomers—present, for example, in a bistable [2]rotaxane, as well as in a couple of bistable [2]catenanes of the donor–acceptor vintage—can be elucidated by slow scan rate cyclic voltammetry. The practice of transitioning from a fast scan rate regime to a slow one permits the measurement of an intermediate redox couple that is a function of the equilibrium that exists between the two translational isomers in the case of all three mechanically interlocked molecules investigated. These intermediate redox potentials can be used to calculate the ground-state distribution constants, K. Whereas, (i) in the case of the bistable [2]rotaxane, composed of a dumbbell component containing π-electron-rich tetrathiafulvalene and dioxynaphthalene recognition sites for the ring component (namely, a tetracationic cyclophane, containing two π-electron-deficient bipyridinium units), a value for K of 10 ± 2 is calculated, (ii) in the case of the two bistable [2]catenanes—one containing a crown ether with tetrathiafulvalene and dioxynaphthalene recognition sites for the tetracationic cyclophane, and the other, tetrathiafulvalene and butadiyne recognition sites—the values for K are orders (one and three, respectively) of magnitude greater. This observation, which has also been probed by theoretical calculations, supports the hypothesis that the extra stability of one translational isomer over the other is because of the influence of the enforced side-on donor–acceptor interactions brought about by both π-electron-rich recognition sites being part of a macrocyclic polyether. PMID:22135467

  15. Active Storage Processing in a Parallel File System

    SciTech Connect

    Felix, Evan J.; Fox, Kevin M.; Regimbal, Kevin M.; Nieplocha, Jarek

    2006-01-01

    By creating a processing system within a parallel file system one can harness the power of unused processing power on servers that have very fast access to the disks they are serving. By inserting a module the Lustre file system the Active Storage Concept is able to perform processing with the file system architecture. Results of using this technology are presented as the results of the Supercomputing StorCloud Challenge Application are reviewed.

  16. Dual-Actuator Active Vibration-Control System

    NASA Technical Reports Server (NTRS)

    Kascak, Albert F.; Kiraly, Louis J.; Montague, Gerald T.; Palazzolo, Alan B.; Manchala, Daniel

    1994-01-01

    Dual-actuator active vibration-control (DAAVC) system is developmental system of type described in "Active Vibration Dampers for Rotating Machinery" (LEW-15427). System features sensors and actuators positioned and oriented at bearings to measure and counteract vibrations of shaft along either of two axes perpendicular to axis of rotation. Effective in damping vibrations of helicopter-engine test stand, making it safer to operate engine at speeds near and above first resonance of engine/test-stand system. Opens new opportunities for engine designers to draw more power from engine, and concept applicable to other rotating machines.

  17. A hybrid electromagnetic shock absorber for active vehicle suspension systems

    NASA Astrophysics Data System (ADS)

    Ebrahimi, Babak; Bolandhemmat, Hamidreza; Behrad Khamesee, Mir; Golnaraghi, Farid

    2011-02-01

    The use of electromagnetic dampers (ED) in vehicle active suspension systems has drawn considerable attention in the past few years, attributed to the fact that active suspension systems have shown superior performance in improving ride comfort and road handling of terrain vehicles, compared with their passive and semi-active counterparts. Although demonstrating superb performance, active suspensions still have some shortcomings that must be overcome. They have high energy consumption, weight, and cost and are not fail-safe in case of a power breakdown. The novel hybrid ED, which is proposed in this paper, is a potential solution to the above-mentioned drawbacks of conventional active suspension systems. The proposed hybrid ED is designed to inherit the high-performance characteristics of an active ED with the reliability of a passive damper in a single package. The eddy current damping effect is utilised as a source of the passive damping. First, a prototype ED is designed and fabricated. The prototype ED is then utilised to experimentally establish the design requirements for a real-size active ED. This is accomplished by comparing its vibration isolation performance in a 1-DOF quarter-car test rig with that of a same-class semi-active damper. Then, after a real-size active ED is designed, the concept of hybrid damper is introduced to the damper design to address the drawbacks of the active ED. Finally, the finite-element method is used to accurately model and analyse the designed hybrid damper. It is demonstrated that by introducing the eddy current damping effect to the active part, a passive damping of approximately 1570 Ns/m is achieved. This amount of passive damping guarantees that the damper is fail-safe and reduces the power consumption more than 70%, compared with an active ED in an automotive active suspension system.

  18. Active support system for 1-m SONG primary mirror

    NASA Astrophysics Data System (ADS)

    Niu, Dongsheng; Wang, Guomin; Gu, Bozhong

    2012-05-01

    Chinese-node telescope of Stellar Observations Network Group (SONG) has a primary mirror 1m in diameter with flat back, which will be supported actively. The performance evaluation of the telescope's active optics system is conducted. Finite element analysis (FEA) is employed to analyze the optical surface figures of the primary mirror, and two optimizations are carried out by using ANSYS: (1) the locations and forces of axial supports are optimized with the telescope pointing to zenith; (2) the lateral support forces are calculated with the telescope pointing to horizon. Axial support force sensitivities are calculated in a case that a single axial support has a force error of 0.5N. The correction ability of the active support system is analyzed when an arbitrary axial support is failure. Several low order Zernike modes are modeled with MATLAB procedure, and active optics corrections are applied to these modes. Thermal deformation of the mirror is also corrected using active support system.

  19. Activity Theory in Information Systems Research and Practice: Theoretical Underpinnings for an Information Systems Development Model

    ERIC Educational Resources Information Center

    Mursu, Anja; Luukkonen, Irmeli; Toivanen, Marika; Korpela, Mikko

    2007-01-01

    Introduction: The purpose of information systems is to facilitate work activities: here we consider how Activity Theory can be applied in information systems development. Method. The requirements for an analytical model for emancipatory, work-oriented information systems research and practice are specified. Previous research work in Activity…

  20. Survey of Active Vibration Isolation Systems for Microgravity Applications

    NASA Technical Reports Server (NTRS)

    Grodsinsky, Carlos M.; Whorton, Mark S.

    2000-01-01

    In view of the utility of space vehicles as orbiting science laboratories, the need for vibration isolation systems for acceleration-sensitive experiments has gained increasing visibility. To date, three active microgravity vibration isolation systems have successfully been demonstrated in flight. A tutorial discussion of the microgravity vibration isolation problem, including a description of the acceleration environment of the International Space Station and attenuation requirements, as well as a comparison or the dynamics of passive isolation, active rack-level isolation, and active payload-level isolation is provided. The flight test results of the three demonstrated systems: suppression of transient accelerations by levitation, the microgravity vibration isolation mount, and the active rack isolation system are surveyed.

  1. Activity-Based Costing Systems for Higher Education.

    ERIC Educational Resources Information Center

    Day, Dennis H.

    1993-01-01

    Examines traditional costing models utilized in higher education and pinpoints shortcomings related to proper identification of costs. Describes activity-based costing systems as a superior alternative for cost identification, measurement, and allocation. (MLF)

  2. [Evaluation of systemic lupus erythematosus activity during pregnancy].

    PubMed

    Olesińska, Marzena; Wiesik-Szewczyk, Ewa; Chwalińska-Sadowska, Hanna

    2007-07-01

    Pregnancy in patients with systemic lupus erythematosus (SLE) is considered a high-risk pregnancy. It is complicated by preeclampsia, premature labour and miscarriage more frequently than in the general population. Improved prognosis depends on low disease activity during conception and on appropriate medical care (SLE activity monitoring, selection of therapy safe for the mother and the developing foetus, advances in neonatology). Because symptoms of physiological pregnancy and SLE exacerbation are similar, their correct interpretation is essential for skin lesions, arthralgias, arterial hypertension or results of laboratory tests: proteinuria, thrombocytopenia or leucopenia observed in the patient. In order to standardise the assessment of SLE activity during pregnancy, scores of this activity are used. In the past, scores validated on non-pregnant populations (including male patients) were used: Systemic Lupus Erythematosus Disease Activity Index (SLEDAI), Systemic Lupus Activity Measure (SLAM), European Consensus Lupus Activity Measurment (ECLAM). Only recently have SLE activity scores been introduced that are specific for pregnant women: Lupus Activity Index In Pregnancy (LAI-P), Systemic Lupus Erythematosus Pregnancy Disease Activity Index (SLEPDAI), modified--Systemic Lupus Activity Measure (m-SLAM) and a visual three-grade score modified--Physician Global Assessment (m-PGA). So far, only scores LAI-P and m-PGA have been validated. According to the LAI-P score, clinical data are divided into 4 groups. Group 1 includes mild clinical symptoms, group 2--symptoms of involvement of internal organs, group 3 pertains to modifications of treatment and group 4 to laboratory parameters. Point values are ascribed to individual parameters depending on their intensity.

  3. Understanding Tensions: Activity Systems Analysis of Cross-Continental Collaboration

    ERIC Educational Resources Information Center

    Ryder, LanHui Zhang; Yamagata-Lynch, Lisa

    2014-01-01

    Using the lens of Vygotsky's sociocultural theory, activity theory, and Engeström's activity systems analysis, this qualitative study explores students' experiences in the context of a sixteen-week transpacific collaboration between seven students at Northern Illinois University (NIU) and seven students from Shandong Normal…

  4. Disorder-mediated crowd control in an active matter system

    PubMed Central

    Pinçe, Erçağ; Velu, Sabareesh K. P.; Callegari, Agnese; Elahi, Parviz; Gigan, Sylvain; Volpe, Giovanni; Volpe, Giorgio

    2016-01-01

    Living active matter systems such as bacterial colonies, schools of fish and human crowds, display a wealth of emerging collective and dynamic behaviours as a result of far-from-equilibrium interactions. The dynamics of these systems are better understood and controlled considering their interaction with the environment, which for realistic systems is often highly heterogeneous and disordered. Here, we demonstrate that the presence of spatial disorder can alter the long-term dynamics in a colloidal active matter system, making it switch between gathering and dispersal of individuals. At equilibrium, colloidal particles always gather at the bottom of any attractive potential; however, under non-equilibrium driving forces in a bacterial bath, the colloids disperse if disorder is added to the potential. The depth of the local roughness in the environment regulates the transition between gathering and dispersal of individuals in the active matter system, thus inspiring novel routes for controlling emerging behaviours far from equilibrium. PMID:26956085

  5. Disorder-mediated crowd control in an active matter system

    NASA Astrophysics Data System (ADS)

    Pinçe, Erçağ; Velu, Sabareesh K. P.; Callegari, Agnese; Elahi, Parviz; Gigan, Sylvain; Volpe, Giovanni; Volpe, Giorgio

    2016-03-01

    Living active matter systems such as bacterial colonies, schools of fish and human crowds, display a wealth of emerging collective and dynamic behaviours as a result of far-from-equilibrium interactions. The dynamics of these systems are better understood and controlled considering their interaction with the environment, which for realistic systems is often highly heterogeneous and disordered. Here, we demonstrate that the presence of spatial disorder can alter the long-term dynamics in a colloidal active matter system, making it switch between gathering and dispersal of individuals. At equilibrium, colloidal particles always gather at the bottom of any attractive potential; however, under non-equilibrium driving forces in a bacterial bath, the colloids disperse if disorder is added to the potential. The depth of the local roughness in the environment regulates the transition between gathering and dispersal of individuals in the active matter system, thus inspiring novel routes for controlling emerging behaviours far from equilibrium.

  6. Flow-injection-type biosensor system for salivary amylase activity.

    PubMed

    Yamaguchi, Masaki; Kanemaru, Masashi; Kanemori, Takahiro; Mizuno, Yasufumi

    2003-05-01

    The authors aim to establish a method that can quantitatively evaluate vital reactions to stress. We have been examining the correlation between stress and salivary amylase activity in order to verify its validity as a stress index. In order to quantify human stress, which changes over time, the relationship between stress and salivary amylase activity must be verified by fast and repeated analysis of salivary amylase activity. Standard biosensors are designed such that the enzyme immobilized on an electrode (enzyme electrode) and the substrate-dependent activity is measured. The reverse approach of measuring the alpha-amylase-dependent activity was adopted. We fabricated an amylase activity analytical system. Maltopentaose was selected as a substrate for alpha-amylase and a flow-injection-type device was used to supply maltopentaose continuously. alpha-Glucosidase, having relatively low enzyme activity, was immobilized on a pre-activated membrane so that it could be enclosed in a pre-column, Glucose oxidase, having higher enzyme activity, was immobilized on a working electrode so that it could function as an amperometric biosensor. A saliva-collecting device was fabricated to make saliva pretreatment unnecessary. As a result, an amylase activity analytical system was fabricated that enabled us to measure salivary amylase activity from 0 to 30 kU/l, with an R(2) value of 0.97. The time-course changes in the salivary amylase activities for 1 week were 5.1%, and the initial sensitivity remained nearly constant. Through this study, we were able to verify the possible development of the amylase activity analytical system.

  7. ATR/OTR-SY Tank Camera Purge System and in Tank Color Video Imaging System

    SciTech Connect

    Werry, S.M.

    1995-06-06

    This procedure will document the satisfactory operation of the 101-SY tank Camera Purge System (CPS) and 101-SY in tank Color Camera Video Imaging System (CCVIS). Included in the CPRS is the nitrogen purging system safety interlock which shuts down all the color video imaging system electronics within the 101-SY tank vapor space during loss of nitrogen purge pressure.

  8. 49 CFR 234.225 - Activation of warning system.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION GRADE CROSSING SIGNAL SYSTEM SAFETY AND STATE ACTION PLANS...-rail grade crossing warning system shall be maintained to activate in accordance with the design of the... operation of through trains before the grade crossing is occupied by rail traffic....

  9. 49 CFR 234.225 - Activation of warning system.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION GRADE CROSSING SIGNAL SYSTEM SAFETY AND STATE ACTION PLANS...-rail grade crossing warning system shall be maintained to activate in accordance with the design of the... operation of through trains before the grade crossing is occupied by rail traffic....

  10. Perceiving active listening activates the reward system and improves the impression of relevant experiences.

    PubMed

    Kawamichi, Hiroaki; Yoshihara, Kazufumi; Sasaki, Akihiro T; Sugawara, Sho K; Tanabe, Hiroki C; Shinohara, Ryoji; Sugisawa, Yuka; Tokutake, Kentaro; Mochizuki, Yukiko; Anme, Tokie; Sadato, Norihiro

    2015-01-01

    Although active listening is an influential behavior, which can affect the social responses of others, the neural correlates underlying its perception have remained unclear. Sensing active listening in social interactions is accompanied by an improvement in the recollected impressions of relevant experiences and is thought to arouse positive feelings. We therefore hypothesized that the recognition of active listening activates the reward system, and that the emotional appraisal of experiences that had been subject to active listening would be improved. To test these hypotheses, we conducted functional magnetic resonance imaging (fMRI) on participants viewing assessments of their own personal experiences made by evaluators with or without active listening attitude. Subjects rated evaluators who showed active listening more positively. Furthermore, they rated episodes more positively when they were evaluated by individuals showing active listening. Neural activation in the ventral striatum was enhanced by perceiving active listening, suggesting that this was processed as rewarding. It also activated the right anterior insula, representing positive emotional reappraisal processes. Furthermore, the mentalizing network was activated when participants were being evaluated, irrespective of active listening behavior. Therefore, perceiving active listening appeared to result in positive emotional appraisal and to invoke mental state attribution to the active listener. PMID:25188354

  11. Perceiving active listening activates the reward system and improves the impression of relevant experiences

    PubMed Central

    Kawamichi, Hiroaki; Yoshihara, Kazufumi; Sasaki, Akihiro T.; Sugawara, Sho K.; Tanabe, Hiroki C.; Shinohara, Ryoji; Sugisawa, Yuka; Tokutake, Kentaro; Mochizuki, Yukiko; Anme, Tokie; Sadato, Norihiro

    2015-01-01

    Although active listening is an influential behavior, which can affect the social responses of others, the neural correlates underlying its perception have remained unclear. Sensing active listening in social interactions is accompanied by an improvement in the recollected impressions of relevant experiences and is thought to arouse positive feelings. We therefore hypothesized that the recognition of active listening activates the reward system, and that the emotional appraisal of experiences that had been subject to active listening would be improved. To test these hypotheses, we conducted functional magnetic resonance imaging (fMRI) on participants viewing assessments of their own personal experiences made by evaluators with or without active listening attitude. Subjects rated evaluators who showed active listening more positively. Furthermore, they rated episodes more positively when they were evaluated by individuals showing active listening. Neural activation in the ventral striatum was enhanced by perceiving active listening, suggesting that this was processed as rewarding. It also activated the right anterior insula, representing positive emotional reappraisal processes. Furthermore, the mentalizing network was activated when participants were being evaluated, irrespective of active listening behavior. Therefore, perceiving active listening appeared to result in positive emotional appraisal and to invoke mental state attribution to the active listener. PMID:25188354

  12. Advanced Active-Magnetic-Bearing Thrust-Measurement System

    NASA Technical Reports Server (NTRS)

    Imlach, Joseph; Kasarda, Mary; Blumber, Eric

    2008-01-01

    An advanced thrust-measurement system utilizes active magnetic bearings to both (1) levitate a floating frame in all six degrees of freedom and (2) measure the levitation forces between the floating frame and a grounded frame. This system was developed for original use in measuring the thrust exerted by a rocket engine mounted on the floating frame, but can just as well be used in other force-measurement applications. This system offers several advantages over prior thrust-measurement systems based on mechanical support by flexures and/or load cells: The system includes multiple active magnetic bearings for each degree of freedom, so that by selective use of one, some, or all of these bearings, it is possible to test a given article over a wide force range in the same fixture, eliminating the need to transfer the article to different test fixtures to obtain the benefit of full-scale accuracy of different force-measurement devices for different force ranges. Like other active magnetic bearings, the active magnetic bearings of this system include closed-loop control subsystems, through which the stiffness and damping characteristics of the magnetic bearings can be modified electronically. The design of the system minimizes or eliminates cross-axis force-measurement errors. The active magnetic bearings are configured to provide support against movement along all three orthogonal Cartesian axes, and such that the support along a given axis does not produce force along any other axis. Moreover, by eliminating the need for such mechanical connections as flexures used in prior thrust-measurement systems, magnetic levitation of the floating frame eliminates what would otherwise be major sources of cross-axis forces and the associated measurement errors. Overall, relative to prior mechanical-support thrust-measurement systems, this system offers greater versatility for adaptation to a variety of test conditions and requirements. The basic idea of most prior active

  13. State Public Health Laboratory System Quality Improvement Activities

    PubMed Central

    Vagnone, Paula Snippes

    2013-01-01

    The Association of Public Health Laboratories (APHL) and the APHL Laboratory Systems and Standards Committee manage the Laboratory System Improvement Program (L-SIP). One component of L-SIP is an assessment that allows the members and stakeholders of a laboratory system to have an open and honest discussion about the laboratory system's strengths and weaknesses. From these facilitated discussions, gaps and opportunities for improvement are identified. In some cases, ideas for how to best address these gaps emerge, and workgroups are formed. Depending on resources, both monetary and personnel, laboratory staff will then prioritize the next component of L-SIP: which quality improvement activities to undertake. This article describes a sample of quality improvement activities initiated by several public health laboratories after they conducted L-SIP assessments. These projects can result in more robust linkages between system entities, which can translate into improvements in the way the system addresses the needs of stakeholders. PMID:23997301

  14. Active reflective components for adaptive optical zoom systems

    NASA Astrophysics Data System (ADS)

    Jungwirth, Matthew Edward Lewis

    This dissertation presents the theoretical and experimental exploration of active reflective components specifically for large-aperture adaptive optical zoom systems. An active reflective component can change its focal length by physically deforming its reflecting surface. Adaptive optical zoom (AOZ) utilizes active components in order to change magnification and achieve optical zoom, as opposed to traditional zooming systems that move elements along the optical axis. AOZ systems are theoretically examined using a novel optical design theory that enables a full-scale tradespace analysis, where optical design begins from a broad perspective and optimizes to a particular system. The theory applies existing strategies for telescope design and aberration simulation to AOZ, culminating in the design of a Cassegrain objective with a 3.3X zoom ratio and a 375mm entrance aperture. AOZ systems are experimentally examined with the development of a large-aperture active mirror constructed of a composite material called carbon fiber reinforced polymer (CFRP). The active CFRP mirror uses a novel actuation method to change radius of curvature, where actuators press against two annular rings placed on the mirror's back. This method enables the radius of curvature to increase from 2000mm to 2010mm. Closed-loop control maintains good optical performance of 1.05 waves peak-to-valley (with respect to a HeNe laser) when the active CFRP mirror is used in conjunction with a commercial deformable mirror.

  15. Low Energy Physical Activity Recognition System on Smartphones

    PubMed Central

    Morillo, Luis Miguel Soria; Gonzalez-Abril, Luis; Ramirez, Juan Antonio Ortega; de la Concepcion, Miguel Angel Alvarez

    2015-01-01

    An innovative approach to physical activity recognition based on the use of discrete variables obtained from accelerometer sensors is presented. The system first performs a discretization process for each variable, which allows efficient recognition of activities performed by users using as little energy as possible. To this end, an innovative discretization and classification technique is presented based on the χ2 distribution. Furthermore, the entire recognition process is executed on the smartphone, which determines not only the activity performed, but also the frequency at which it is carried out. These techniques and the new classification system presented reduce energy consumption caused by the activity monitoring system. The energy saved increases smartphone usage time to more than 27 h without recharging while maintaining accuracy. PMID:25742171

  16. Emergent Ultra-Long-Range Interactions Between Active Particles in Hybrid Active-Inactive Systems

    NASA Astrophysics Data System (ADS)

    Steimel, Joshua; Aragones, Juan; Hu, Helen; Qureshi, Naser; Alexander-Katz, Alfredo

    Particle-particle interactions determine the state of a system. Control over the range and magnitude of such interactions has been an active area of research for decades due to the fundamental challenges it poses in science and technology. Effective interactions between active particles have gathered much attention as they can lead to out-of-equilibrium cooperative states such as flocking. Inspired by nature, where active living cells coexist with lifeless, immobile objects and structures, here we study the effective interactions that appear in systems composed of active and passive mixtures of colloids. Our system is a two dimensional colloidal monolayer composed primarily of passive (inactive) colloids and a very small fraction of active (sinning) ferromagnetic colloids. We find an emergent ultra-long-range attractive interaction between active particles induced by the activity of the spinning particles and mediated by the elasticity of the passive medium. Interestingly, the appearance of such interaction depends on the spinning protocol and has a minimum actuation time scale below which no attraction is observed. Overall, these results clearly show that in the presence of elastic components, active particles can interact across very long distances without any chemical modification of the environment. Such a mechanism might potentially be important for some biological systems and can be harnessed for newer developments in synthetic active soft materials.

  17. Accelerometer's position independent physical activity recognition system for long-term activity monitoring in the elderly.

    PubMed

    Khan, Adil Mehmood; Lee, Young-Koo; Lee, Sungyoung; Kim, Tae-Seong

    2010-12-01

    Mobility is a good indicator of health status and thus objective mobility data could be used to assess the health status of elderly patients. Accelerometry has emerged as an effective means for long-term physical activity monitoring in the elderly. However, the output of an accelerometer varies at different positions on a subject's body, even for the same activity, resulting in high within-class variance. Existing accelerometer-based activity recognition systems thus require firm attachment of the sensor to a subject's body. This requirement makes them impractical for long-term activity monitoring during unsupervised free-living as it forces subjects into a fixed life pattern and impede their daily activities. Therefore, we introduce a novel single-triaxial-accelerometer-based activity recognition system that reduces the high within-class variance significantly and allows subjects to carry the sensor freely in any pocket without its firm attachment. We validated our system using seven activities: resting (lying/sitting/standing), walking, walking-upstairs, walking-downstairs, running, cycling, and vacuuming, recorded from five positions: chest pocket, front left trousers pocket, front right trousers pocket, rear trousers pocket, and inner jacket pocket. Its simplicity, ability to perform activities unimpeded, and an average recognition accuracy of 94% make our system a practical solution for continuous long-term activity monitoring in the elderly.

  18. Simulation of P systems with active membranes on CUDA.

    PubMed

    Cecilia, José M; García, José M; Guerrero, Ginés D; Martínez-del-Amor, Miguel A; Pérez-Hurtado, Ignacio; Pérez-Jiménez, Mario J

    2010-05-01

    P systems or Membrane Systems provide a high-level computational modelling framework that combines the structure and dynamic aspects of biological systems in a relevant and understandable way. They are inherently parallel and non-deterministic computing devices. In this article, we discuss the motivation, design principles and key of the implementation of a simulator for the class of recognizer P systems with active membranes running on a (GPU). We compare our parallel simulator for GPUs to the simulator developed for a single central processing unit (CPU), showing that GPUs are better suited than CPUs to simulate P systems due to their highly parallel nature.

  19. Active Beam Shaping System and Method Using Sequential Deformable Mirrors

    NASA Technical Reports Server (NTRS)

    Norman, Colin A. (Inventor); Pueyo, Laurent A. (Inventor)

    2015-01-01

    An active optical beam shaping system includes a first deformable mirror arranged to at least partially intercept an entrance beam of light and to provide a first reflected beam of light, a second deformable mirror arranged to at least partially intercept the first reflected beam of light from the first deformable mirror and to provide a second reflected beam of light, and a signal processing and control system configured to communicate with the first and second deformable mirrors. The first deformable mirror, the second deformable mirror and the signal processing and control system together provide a large amplitude light modulation range to provide an actively shaped optical beam.

  20. Individual popularity and activity in online social systems

    NASA Astrophysics Data System (ADS)

    Hu, Haibo; Han, Dingyi; Wang, Xiaofan

    2010-03-01

    We propose a stochastic model of web user behaviors in online social systems, and study the influence of the attraction kernel on the statistical property of user or item occurrence. Combining the different growth patterns of new entities and attraction patterns of old ones, different heavy-tailed distributions for popularity and activity which have been observed in real life, can be obtained. From a broader perspective, we explore the underlying principle governing the statistical feature of individual popularity and activity in online social systems and point out the potential simple mechanism underlying the complex dynamics of the systems.

  1. Rat C-reactive protein activates the autologous complement system.

    PubMed

    Diaz Padilla, Niubel; Bleeker, Wim K; Lubbers, Yvonne; Rigter, Gemma M M; Van Mierlo, Gerard J; Daha, Mohamed R; Hack, C Erik

    2003-08-01

    Activation of complement is a biological function of human C-reactive protein (hCRP), whereas rat CRP (rCRP) has been claimed to be unable to activate complement. As important biological functions of proteins are probably conserved among species, we re-evaluated, using various ligands, the capability of rCRP to activate complement. The activation of complement by hCRP and rCRP was investigated in solid- and fluid-phase systems. In the solid-phase system, purified CRP was fixed to enzyme-linked immunosorbent assay (ELISA) plates and incubated with human or rat recalcified plasma. Dose-dependent binding of human and rat C3 and C4 was observed to human and rat CRP, respectively. In the fluid-phase system, recalcified rat plasma, which contains about 500 mg/l of CRP, or human plasma supplemented with hCRP, were incubated with lyso-phosphatidylcholine. A dose-dependent activation of complement was observed upon incubation with this ligand, as reflected by the generation of activated C4 as well as of CRP-complement complexes. This activation was, in both cases, inhibited by preincubation of plasma with p-aminophosphorylcholine, a specific inhibitor of the interaction of CRP with its ligands, or by chelation of calcium ions. We conclude that rat CRP, similarly to human CRP, can activate autologous complement. These results support the notion that opsonization of ligands with complement is an important biological function of CRP.

  2. Discourse Systems and Aspirin Bottles: On Literacy.

    ERIC Educational Resources Information Center

    Gee, James Paul

    1988-01-01

    Any use of language involves the following interlocking systems: (1) referential; (2) contextualization; and (3) ideology. These together constitute culturally viable "discourse systems." Examination of these systems as they operate in daily contexts reveals a paradox in the concept of literacy. (Author/BJV)

  3. JT-60 Control System

    SciTech Connect

    Yonekawa, I.; Kawamata, Y.; Totsuka, T.; Akasaka, H.; Sueoka, M.; Kurihara, K.; Kimura, T.

    2002-09-15

    The present status of the JT-60U control system is reported including its original design concept, the progress of the system, and various modifications since the JT-60 upgrade. This control system has features of a functionally distributed and hierarchical structure, using CAMAC interfaces initially, which have been replaced by versatile module Europe (VME)-bus interfaces, and a protective interlock system composed of both software and hard-wired interlock logics. Plant monitoring and control are performed by efficient data communication through CAMAC highways and Ethernet with TCP/IP protocols. Sequential control of plasma discharges is executed by a combination of a remodeled VME-bus system and a timing system. A real-time plasma control system and a human interface system have been continuously modified corresponding to the progress of JT-60U experiments.

  4. Early Conversion of External Fixation to Interlocked Nailing in Open Fractures of Both Bone Leg Assisted with Vacuum Closure (VAC) - Final Outcome

    PubMed Central

    Raj, Manish; Kumar, Sunil; Singh, Pulkesh; Kumar, Dinesh; Singh, Jasveer; Deep, Akash

    2016-01-01

    Introduction Management of compound grade III fractures of both bone leg includes external stabilization for long period, followed by various soft tissue coverage procedures. Primary interlocking of tibia had been also done with variable results. External fixation for long time without any bone loss often leads to infected nonunion, loss of reduction, pin tract infection and failure of fixation, primary interlocking in compound grade III fractures had shown high medullary infection rate. We managed all cases of compound grade III A/B fractures with primary external fixation, simultaneous wound management using vacuum assisted closure (VAC) followed by early conversion to interlocking within 2 weeks of fixator application. Aim To determine the effectiveness of vacuum assisted closure (VAC) for the early conversion of external fixator to definitive interlocking in open fractures of the both bone leg. Materials and Methods In current study we selected 84 cases of compound grade IIIA/B diaphyseal fractures of both bone leg during period of May 2010 to September 2013. We managed these cases by immediate debridement and application of external fixation followed by repeated debridement, application of vacuum assisted closure (VAC) and conversion to interlocking within two weeks. Results Out of 84 cases union was achieved in 80(95%) of cases with definitive tibial interlocking. Excellent to good result were obtained in 77(91.8%) of cases and fair to poor result seen in rest of 7(8.2%) of cases according to modified Ketenjian’s criteria. 5 out of these 7 poor result group cases were from Compound Grade III B group to start with. Deep infection rate in our series were 7% i.e. total 6 cases and 4 out of these were from compound Grade III B group to start with. Conclusion Vacuum assisted closure (VAC) give a good help for rapid closure of the wound and help in early conversion to definitive intramedullary nailing. Reamed nail could well be used in compound grade IIIA

  5. Activator-inhibitor systems on heterogeneous ecological networks

    NASA Astrophysics Data System (ADS)

    Nicolaides, C.; Cueto-Felgueroso, L.; Juanes, R.

    2012-12-01

    The consideration of activator-inhibitor systems as complex networks has broadened our knowledge of non-equilibrium reaction-diffusion processes in heterogeneous systems. For example, the Turing mechanism represents a classical model for the formation of self-organized spatial structures in non-equilibrium activator-inhibitor systems. The study of Turing patterns in networks with heterogeneous connectivity has revealed that, contrary to other models and systems, the segregation process takes place mainly in vertices of low degree. In this paper, we study the formation of vegetation patterns in semiarid ecosystems from the perspective of a heterogeneous interacting ecological network. The structure of ecological networks yields fundamental insight into the ecosystem self-organization. Using simple rules for the short-range activation and global inhibition, we reconstruct the observed power-law distribution of vegetation patch size that has been observed in semiarid ecosystems like the Kalahari transect.

  6. Emergent ultra-long-range interactions between active particles in hybrid active-inactive systems

    NASA Astrophysics Data System (ADS)

    Steimel, Joshua P.; Aragones, Juan L.; Hu, Helen; Qureshi, Naser

    2016-04-01

    Particle-particle interactions determine the state of a system. Control over the range of such interactions as well as their magnitude has been an active area of research for decades due to the fundamental challenges it poses in science and technology. Very recently, effective interactions between active particles have gathered much attention as they can lead to out-of-equilibrium cooperative states such as flocking. Inspired by nature, where active living cells coexist with lifeless objects and structures, here we study the effective interactions that appear in systems composed of active and passive mixtures of colloids. Our systems are 2D colloidal monolayers composed primarily of passive (inactive) colloids, and a very small fraction of active (spinning) ferromagnetic colloids. We find an emergent ultra-long-range attractive interaction induced by the activity of the spinning particles and mediated by the elasticity of the passive medium. Interestingly, the appearance of such interaction depends on the spinning protocol and has a minimum actuation timescale below which no attraction is observed. Overall, these results clearly show that, in the presence of elastic components, active particles can interact across very long distances without any chemical modification of the environment. Such a mechanism might potentially be important for some biological systems and can be harnessed for newer developments in synthetic active soft materials.

  7. Emergent ultra-long-range interactions between active particles in hybrid active-inactive systems.

    PubMed

    Steimel, Joshua P; Aragones, Juan L; Hu, Helen; Qureshi, Naser; Alexander-Katz, Alfredo

    2016-04-26

    Particle-particle interactions determine the state of a system. Control over the range of such interactions as well as their magnitude has been an active area of research for decades due to the fundamental challenges it poses in science and technology. Very recently, effective interactions between active particles have gathered much attention as they can lead to out-of-equilibrium cooperative states such as flocking. Inspired by nature, where active living cells coexist with lifeless objects and structures, here we study the effective interactions that appear in systems composed of active and passive mixtures of colloids. Our systems are 2D colloidal monolayers composed primarily of passive (inactive) colloids, and a very small fraction of active (spinning) ferromagnetic colloids. We find an emergent ultra-long-range attractive interaction induced by the activity of the spinning particles and mediated by the elasticity of the passive medium. Interestingly, the appearance of such interaction depends on the spinning protocol and has a minimum actuation timescale below which no attraction is observed. Overall, these results clearly show that, in the presence of elastic components, active particles can interact across very long distances without any chemical modification of the environment. Such a mechanism might potentially be important for some biological systems and can be harnessed for newer developments in synthetic active soft materials.

  8. JPL Activated Carbon Treatment System (ACTS) for sewage

    NASA Technical Reports Server (NTRS)

    1976-01-01

    An Activated Carbon Treatment System (ACTS) was developed for sewage treatment and is being applied to a one-million gallon per day sewage treatment pilot plant in Orange County California. Activities reported include pyrolysis and activation of carbon-sewage sludge, and activated carbon treatment of sewage to meet ocean discharge standards. The ACTS Sewage treatment operations include carbon-sewage treatment, primary and secondary clarifiers, gravity (multi-media) filter, filter press dewatering, flash drying of carbon-sewage filter cake, and sludge pyrolysis and activation. Tests were conducted on a laboratory scale, 10,000 gallon per day demonstration plant and pilot test equipment. Preliminary economic studies are favorable to the ACTS process relative to activated sludge treatment for a 175,000,000 gallon per day sewage treatment plant.

  9. Turing pattern formation in fractional activator-inhibitor systems

    NASA Astrophysics Data System (ADS)

    Henry, B. I.; Langlands, T. A. M.; Wearne, S. L.

    2005-08-01

    Activator-inhibitor systems of reaction-diffusion equations have been used to describe pattern formation in numerous applications in biology, chemistry, and physics. The rate of diffusion in these applications is manifest in the single parameter of the diffusion constant, and stationary Turing patterns occur above a critical value of d representing the ratio of the diffusion constants of the inhibitor to the activator. Here we consider activator-inhibitor systems in which the diffusion is anomalous subdiffusion; the diffusion rates are manifest in both a diffusion constant and a diffusion exponent. A consideration of this problem in terms of continuous-time random walks with sources and sinks leads to a reaction-diffusion system with fractional order temporal derivatives operating on the spatial Laplacian. We have carried out an algebraic stability analysis of the homogeneous steady-state solution in fractional activator-inhibitor systems, with Gierer-Meinhardt reaction kinetics and with Brusselator reaction kinetics. For each class of reaction kinetics we identify a Turing instability bifurcation curve in the two-dimensional diffusion parameter space. The critical value of d , for Turing instabilities, decreases monotonically with the anomalous diffusion exponent between unity (standard diffusion) and zero (extreme subdiffusion). We have also carried out numerical simulations of the governing fractional activator-inhibitor equations and we show that the Turing instability precipitates the formation of complex spatiotemporal patterns. If the diffusion of the activator and inhibitor have the same anomalous scaling properties, then the surface profiles of these patterns for values of d slightly above the critical value varies from smooth stationary patterns to increasingly rough and nonstationary patterns as the anomalous diffusion exponent varies from unity towards zero. If the diffusion of the activator is anomalous subdiffusion but the diffusion of the inhibitor

  10. Turing pattern formation in fractional activator-inhibitor systems.

    PubMed

    Henry, B I; Langlands, T A M; Wearne, S L

    2005-08-01

    Activator-inhibitor systems of reaction-diffusion equations have been used to describe pattern formation in numerous applications in biology, chemistry, and physics. The rate of diffusion in these applications is manifest in the single parameter of the diffusion constant, and stationary Turing patterns occur above a critical value of d representing the ratio of the diffusion constants of the inhibitor to the activator. Here we consider activator-inhibitor systems in which the diffusion is anomalous subdiffusion; the diffusion rates are manifest in both a diffusion constant and a diffusion exponent. A consideration of this problem in terms of continuous-time random walks with sources and sinks leads to a reaction-diffusion system with fractional order temporal derivatives operating on the spatial Laplacian. We have carried out an algebraic stability analysis of the homogeneous steady-state solution in fractional activator-inhibitor systems, with Gierer-Meinhardt reaction kinetics and with Brusselator reaction kinetics. For each class of reaction kinetics we identify a Turing instability bifurcation curve in the two-dimensional diffusion parameter space. The critical value of d , for Turing instabilities, decreases monotonically with the anomalous diffusion exponent between unity (standard diffusion) and zero (extreme subdiffusion). We have also carried out numerical simulations of the governing fractional activator-inhibitor equations and we show that the Turing instability precipitates the formation of complex spatiotemporal patterns. If the diffusion of the activator and inhibitor have the same anomalous scaling properties, then the surface profiles of these patterns for values of d slightly above the critical value varies from smooth stationary patterns to increasingly rough and nonstationary patterns as the anomalous diffusion exponent varies from unity towards zero. If the diffusion of the activator is anomalous subdiffusion but the diffusion of the inhibitor

  11. Modanifil activates the histaminergic system through the orexinergic neurons.

    PubMed

    Ishizuka, Tomoko; Murotani, Tomotaka; Yamatodani, Atsushi

    2010-10-15

    Modafinil is a drug used to treat hypersomnolence of narcolepsy. We previously reported that modafinil increases hypothalamic histamine release in rats but did not increase locomotor activity in histamine-depleted mice, suggesting that modafinil-induced locomotor activity involves the histaminergic system. Modafinil is also thought to express its effect through the orexinergic neurons, and orexin increases hypothalamic histamine release. These findings led us to investigate whether modafinil activates the histaminergic system via the orexinergic system. In the present study, we performed in vivo microdialysis and c-Fos immunohistochemistry to investigate whether the orexinergic system mediates the activation of the histaminergic system by modafinil using orexin neuron-deficient mice. Two hours after the injection, modafinil (150 mg/kg) caused a significant increase of histamine release compared to the basal release in wild type mice. However, modafinil had no effect on the histamine release in orexin neuron-deficient mice. By immunohistochemical study, we found that there was no neuronal activation in the tuberomammillary nucleus where the cell bodies of the histaminergic neurons exclusively exist in orexin neuron-deficient mice. These findings indicate that modafinil-induced increment of histamine release requires intact orexinergic neurons.

  12. The hydro nuclear services dry active waste processing system

    SciTech Connect

    Bunker, A.S.

    1985-04-01

    There is a real need for a dry active waste processing system that can separate clean trash and recoverable items from radwaste safely and efficiently. This paper reports that Hydro Nuclear Services has produced just such a system and is marketing it as a DAW Segregation/Volume Reduction Process. The system is a unique, semi-automated package of sensitive monitoring instruments of volume reduction equipment that separates clean trash from contaminated and recoverable items in the waste stream and prepares the clean trash for unrestricted release. What makes the HNS system truly unique is its end product - clean trash.

  13. Application considerations and compensation characteristics of shunt active and series active filters in power systems

    SciTech Connect

    Peng, Fang Zheng; Lai, Jih-Sheng

    1996-10-01

    This paper characterizes typical nonlinear loads into two types of harmonic sources -harmonic current source and harmonic voltage source, which produce highly distorted currents and voltages, respectively. The conventional approach of active harmonic compensation has been the parallel type or `shunt active filter.` It is shown in this paper that the shunt active filter is effective only to harmonic current sources but not to harmonic voltage sources. On the other hand, the active filter connected in series with the system or `series active filter` is very effective in suppression of the harmonic voltage sources. General compensation characteristics of shunt active filters and series active filters are given analytically. The features, required operation conditions, and application considerations of both filters are described analytically and demonstrated experimentally.

  14. Direct observation of interlocked domain walls and topological four-state vortex-like domain patterns in multiferroic YMnO{sub 3} single crystal

    SciTech Connect

    Tian, Lei; Wang, Yumei Ge, Binghui; Zhang, Xiangqun; Zhang, Zhihua

    2015-03-16

    Using the advanced spherical aberration-corrected high angle annular dark field scanning transmission electron microscope imaging techniques, we investigated atomic-scale structural features of domain walls and domain patterns in YMnO{sub 3} single crystal. Three different types of interlocked ferroelectric-antiphase domain walls and two abnormal topological four-state vortex-like domain patterns are identified. Each ferroelectric domain wall is accompanied by a translation vector, i.e., 1/6[210] or −1/6[210], demonstrating its interlocked nature. Different from the four-state vortex domain patterns caused by a partial edge dislocation, two four-state vortex-like domain configurations have been obtained at atomic level. These observed phenomena can further extend our understanding of the fascinating vortex domain patterns in multiferroic hexagonal rare-earth manganites.

  15. Bioorthogonal Chemical Activation of Kinases in Living Systems

    PubMed Central

    2016-01-01

    Selective manipulation of protein kinases under living conditions is highly desirable yet extremely challenging, particularly in a gain-of-function fashion. Here we employ our recently developed bioorthogonal cleavage reaction as a general strategy for intracellular activation of individual kinases. Site-specific incorporation of trans-cyclooctene-caged lysine in place of the conserved catalytic lysine, in conjunction with the cleavage partner dimethyl-tetrazine, allowed efficient lysine decaging with the kinase activity chemically rescued in living systems. PMID:27280167

  16. Evaluation of an Active Clearance Control System Concept

    NASA Technical Reports Server (NTRS)

    Steinetz, Bruce M.; Lattime, Scott B.; Taylor, Shawn; DeCastro, Jonathan A.; Oswald, Jay; Melcher, Kevin J.

    2005-01-01

    Reducing blade tip clearances through active tip clearance control in the high pressure turbine can lead to significant reductions in emissions and specific fuel consumption as well as dramatic improvements in operating efficiency and increased service life. Current engines employ scheduled cooling of the outer case flanges to reduce high pressure turbine tip clearances during cruise conditions. These systems have relatively slow response and do not use clearance measurement, thereby forcing cold build clearances to set the minimum clearances at extreme operating conditions (e.g., takeoff, reburst) and not allowing cruise clearances to be minimized due to the possibility of throttle transients (e.g., step change in altitude). In an effort to improve upon current thermal methods, a first generation mechanically-actuated active clearance control (ACC) system has been designed and fabricated. The system utilizes independent actuators, a segmented shroud structure, and clearance measurement feedback to provide fast and precise active clearance control throughout engine operation. Ambient temperature performance tests of this first generation ACC system assessed individual seal component leakage rates and both static and dynamic overall system leakage rates. The ability of the nine electric stepper motors to control the position of the seal carriers in both open- and closed-loop control modes for single and multiple cycles was investigated. The ability of the system to follow simulated engine clearance transients in closed-loop mode showed the system was able to track clearances to within a tight tolerance ( 0.001 in. error).

  17. Evaluation of an Active Clearance Control System Concept

    NASA Technical Reports Server (NTRS)

    Steinetz, Bruce M.; Lattime, Scott B.; DeCastro, Jonathan A.; Oswald, Jay; Melcher, Kevin J.

    2005-01-01

    Reducing blade tip clearances through active tip clearance control in the high pressure turbine can lead to significant reductions in emissions and specific fuel consumption as well as dramatic improvements in operating efficiency and increased service life. Current engines employ scheduled cooling of the outer case flanges to reduce high pressure turbine tip clearances during cruise conditions. These systems have relatively slow response and do not use clearance measurement, thereby forcing cold build clearances to set the minimum clearances at extreme operating conditions (e.g., takeoff, reburst) and not allowing cruise clearances to be minimized due to the possibility of throttle transients (e.g., step change in altitude). In an effort to improve upon current thermal methods, a first generation mechanically-actuated active clearance control (ACC) system has been designed and fabricated. The system utilizes independent actuators, a segmented shroud structure, and clearance measurement feedback to provide fast and precise active clearance control throughout engine operation. Ambient temperature performance tests of this first generation ACC system assessed individual seal component leakage rates and both static and dynamic overall system leakage rates. The ability of the nine electric stepper motors to control the position of the seal carriers in both open- and closed-loop control modes for single and multiple cycles was investigated. The ability of the system to follow simulated engine clearance transients in closed-loop mode showed the system was able to track clearances to within a tight tolerance (0.001 in. error).

  18. A comparison of active adverse event surveillance systems worldwide.

    PubMed

    Huang, Yu-Lin; Moon, Jinhee; Segal, Jodi B

    2014-08-01

    Post-marketing drug surveillance for adverse drug events (ADEs) has typically relied on spontaneous reporting. Recently, regulatory agencies have turned their attention to more preemptive approaches that use existing data for surveillance. We conducted an environmental scan to identify active surveillance systems worldwide that use existing data for the detection of ADEs. We extracted data about the systems' structures, data, and functions. We synthesized the information across systems to identify common features of these systems. We identified nine active surveillance systems. Two systems are US based-the FDA Sentinel Initiative (including both the Mini-Sentinel Initiative and the Federal Partner Collaboration) and the Vaccine Safety Datalink (VSD); two are Canadian-the Canadian Network for Observational Drug Effect Studies (CNODES) and the Vaccine and Immunization Surveillance in Ontario (VISION); and two are European-the Exploring and Understanding Adverse Drug Reactions by Integrative Mining of Clinical Records and Biomedical Knowledge (EU-ADR) Alliance and the Vaccine Adverse Event Surveillance and Communication (VAESCO). Additionally, there is the Asian Pharmacoepidemiology Network (AsPEN) and the Shanghai Drug Monitoring and Evaluative System (SDMES). We identified two systems in the UK-the Vigilance and Risk Management of Medicines (VRMM) Division and the Drug Safety Research Unit (DSRU), an independent academic unit. These surveillance systems mostly use administrative claims or electronic medical records; most conduct pharmacovigilance on behalf of a regulatory agency. Either a common data model or a centralized model is used to access existing data. The systems have been built using national data alone or via partnership with other countries. However, active surveillance systems using existing data remain rare. North America and Europe have the most population coverage; with Asian countries making good advances. PMID:25022829

  19. Virial pressure in systems of spherical active Brownian particles.

    PubMed

    Winkler, Roland G; Wysocki, Adam; Gompper, Gerhard

    2015-09-01

    The pressure of suspensions of self-propelled objects is studied theoretically and by simulation of spherical active Brownian particles (ABPs). We show that for certain geometries, the mechanical pressure as force/area of confined systems can be equally expressed by bulk properties, which implies the existence of a nonequilibrium equation of state. Exploiting the virial theorem, we derive expressions for the pressure of ABPs confined by solid walls or exposed to periodic boundary conditions. In both cases, the pressure comprises three contributions: the ideal-gas pressure due to white-noise random forces, an activity-induced pressure ("swim pressure"), which can be expressed in terms of a product of the bare and a mean effective particle velocity, and the contribution by interparticle forces. We find that the pressure of spherical ABPs in confined systems explicitly depends on the presence of the confining walls and the particle-wall interactions, which has no correspondence in systems with periodic boundary conditions. Our simulations of three-dimensional ABPs in systems with periodic boundary conditions reveal a pressure-concentration dependence that becomes increasingly nonmonotonic with increasing activity. Above a critical activity and ABP concentration, a phase transition occurs, which is reflected in a rapid and steep change of the pressure. We present and discuss the pressure for various activities and analyse the contributions of the individual pressure components.

  20. Virial pressure in systems of spherical active Brownian particles.

    PubMed

    Winkler, Roland G; Wysocki, Adam; Gompper, Gerhard

    2015-09-01

    The pressure of suspensions of self-propelled objects is studied theoretically and by simulation of spherical active Brownian particles (ABPs). We show that for certain geometries, the mechanical pressure as force/area of confined systems can be equally expressed by bulk properties, which implies the existence of a nonequilibrium equation of state. Exploiting the virial theorem, we derive expressions for the pressure of ABPs confined by solid walls or exposed to periodic boundary conditions. In both cases, the pressure comprises three contributions: the ideal-gas pressure due to white-noise random forces, an activity-induced pressure ("swim pressure"), which can be expressed in terms of a product of the bare and a mean effective particle velocity, and the contribution by interparticle forces. We find that the pressure of spherical ABPs in confined systems explicitly depends on the presence of the confining walls and the particle-wall interactions, which has no correspondence in systems with periodic boundary conditions. Our simulations of three-dimensional ABPs in systems with periodic boundary conditions reveal a pressure-concentration dependence that becomes increasingly nonmonotonic with increasing activity. Above a critical activity and ABP concentration, a phase transition occurs, which is reflected in a rapid and steep change of the pressure. We present and discuss the pressure for various activities and analyse the contributions of the individual pressure components. PMID:26221908

  1. Game-Based Virtual Worlds as Decentralized Virtual Activity Systems

    NASA Astrophysics Data System (ADS)

    Scacchi, Walt

    There is widespread interest in the development and use of decentralized systems and virtual world environments as possible new places for engaging in collaborative work activities. Similarly, there is widespread interest in stimulating new technological innovations that enable people to come together through social networking, file/media sharing, and networked multi-player computer game play. A decentralized virtual activity system (DVAS) is a networked computer supported work/play system whose elements and social activities can be both virtual and decentralized (Scacchi et al. 2008b). Massively multi-player online games (MMOGs) such as World of Warcraft and online virtual worlds such as Second Life are each popular examples of a DVAS. Furthermore, these systems are beginning to be used for research, deve-lopment, and education activities in different science, technology, and engineering domains (Bainbridge 2007, Bohannon et al. 2009; Rieber 2005; Scacchi and Adams 2007; Shaffer 2006), which are also of interest here. This chapter explores two case studies of DVASs developed at the University of California at Irvine that employ game-based virtual worlds to support collaborative work/play activities in different settings. The settings include those that model and simulate practical or imaginative physical worlds in different domains of science, technology, or engineering through alternative virtual worlds where players/workers engage in different kinds of quests or quest-like workflows (Jakobsson 2006).

  2. Manned spaceflight activity planning with knowledge-based systems

    NASA Technical Reports Server (NTRS)

    Mogilensky, J.; Dalton, R. E.; Scarl, E. A.

    1983-01-01

    An on-board expert system, capable of assisting with crew-activity planning and platform-status monitoring, could provide unprecedented autonomy to the crew of a permanently manned space station. To demonstrate this concept's feasibility, an existing knowledge-based system is adapted to support Space Shuttle crew-activity timeline planning. Proposed timeline changes are to be checked for compliance with crew capabilities and mission operating guidelines, so that a nonexpert can be guided through a successful plan modification. Early lessons that have been learned about the scope of the adaptation needed to achieve this objective are presented.

  3. Implementation study of wearable sensors for activity recognition systems

    PubMed Central

    Ghassemian, Mona

    2015-01-01

    This Letter investigates and reports on a number of activity recognition methods for a wearable sensor system. The authors apply three methods for data transmission, namely ‘stream-based’, ‘feature-based’ and ‘threshold-based’ scenarios to study the accuracy against energy efficiency of transmission and processing power that affects the mote's battery lifetime. They also report on the impact of variation of sampling frequency and data transmission rate on energy consumption of motes for each method. This study leads us to propose a cross-layer optimisation of an activity recognition system for provisioning acceptable levels of accuracy and energy efficiency. PMID:26609413

  4. Retrofitting activated sludge systems to intermittent aeration for nitrogen removal.

    PubMed

    Hanhan, O; Artan, N; Orhon, D

    2002-01-01

    The paper provides the basis and the conceptual approach of applying process kinetics and modelling to the design of alternating activated sludge systems for retrofitting existing activated sludge plants to intermittent aeration for nitrogen removal. It shows the significant role of the two specific parameters, namely, the aerated fraction and the cycle time ratio on process performance through model simulations and proposes a way to incorporate them into a design procedure using process stoichiometry and mass balance. It illustrates the effect of these parameters, together with the sludge age, in establishing the balance between the denitrification potential and the available nitrogen created in the anoxic/aerobic sequences of system operation.

  5. Implementation study of wearable sensors for activity recognition systems.

    PubMed

    Rezaie, Hamed; Ghassemian, Mona

    2015-08-01

    This Letter investigates and reports on a number of activity recognition methods for a wearable sensor system. The authors apply three methods for data transmission, namely 'stream-based', 'feature-based' and 'threshold-based' scenarios to study the accuracy against energy efficiency of transmission and processing power that affects the mote's battery lifetime. They also report on the impact of variation of sampling frequency and data transmission rate on energy consumption of motes for each method. This study leads us to propose a cross-layer optimisation of an activity recognition system for provisioning acceptable levels of accuracy and energy efficiency.

  6. Retrofitting activated sludge systems to intermittent aeration for nitrogen removal.

    PubMed

    Hanhan, O; Artan, N; Orhon, D

    2002-01-01

    The paper provides the basis and the conceptual approach of applying process kinetics and modelling to the design of alternating activated sludge systems for retrofitting existing activated sludge plants to intermittent aeration for nitrogen removal. It shows the significant role of the two specific parameters, namely, the aerated fraction and the cycle time ratio on process performance through model simulations and proposes a way to incorporate them into a design procedure using process stoichiometry and mass balance. It illustrates the effect of these parameters, together with the sludge age, in establishing the balance between the denitrification potential and the available nitrogen created in the anoxic/aerobic sequences of system operation. PMID:12420968

  7. Activity-based costing for integrated delivery systems.

    PubMed

    Baker, J J

    1995-01-01

    The paradigm shift toward managed care is fueling new cost-finding demands. More sophisticated methods are emerging to meet these demands. Foremost among the new methods is activity-based costing (ABC). ABC is designed to eliminate cross-subsidies between products or services. Because costs are traced by activities across departments and cost centers, costs can also be traced by activities across integrated delivery systems (IDSs). The methodology makes ABC very applicable to combinations of providers including chains, affiliated groups, and IDS participants. PMID:8820298

  8. Activity-based costing for integrated delivery systems.

    PubMed

    Baker, J J

    1995-01-01

    The paradigm shift toward managed care is fueling new cost-finding demands. More sophisticated methods are emerging to meet these demands. Foremost among the new methods is activity-based costing (ABC). ABC is designed to eliminate cross-subsidies between products or services. Because costs are traced by activities across departments and cost centers, costs can also be traced by activities across integrated delivery systems (IDSs). The methodology makes ABC very applicable to combinations of providers including chains, affiliated groups, and IDS participants.

  9. Characterizing wind turbine system response to lightning activity

    SciTech Connect

    McNiff, B.; LaWhite, N.; Muljadi, E.

    1998-07-01

    A lightning protection research program was instituted by National Renewable Energy Laboratory to minimize lightning damage to wind turbines and to further the understanding of effective damage mitigation techniques. To that end, a test program is under way to observe lightning activity, protection system response, and damage at a wind power plant in the Department of Energy (DOE) and Electric Power Research Institute (EPRI) Turbine Verification Program. The authors installed Lightning activated surveillance cameras along with a special storm tracking device to observe the activity in the wind plant area. They instrumented the turbines with lightning and ground current detection devices to log direct and indirect strike activity at each unit. They installed a surge monitor on the utility interface to track incoming activity from the transmission lines. Maintenance logs are used to verify damage and determine downtime and repair costs. Actual strikes to turbines were recorded on video and ancillary devices. The test setup and some results are discussed in this paper.

  10. Benfotiamine upregulates antioxidative system in activated BV-2 microglia cells

    PubMed Central

    Bozic, Iva; Savic, Danijela; Stevanovic, Ivana; Pekovic, Sanja; Nedeljkovic, Nadezda; Lavrnja, Irena

    2015-01-01

    Chronic microglial activation and resulting sustained neuroinflammatory reaction are generally associated with neurodegeneration. Activated microglia acquires proinflammatory cellular profile that generates oxidative burst. Their persistent activation exacerbates inflammation, which damages healthy neurons via cytotoxic mediators, such as superoxide radical anion and nitric oxide. In our recent study, we have shown that benfotiamine (S-benzoylthiamine O-monophosphate) possesses anti-inflammatory effects. Here, the effects of benfotiamine on the pro-oxidative component of activity of LPS-stimulated BV-2 cells were investigated. The activation of microglia was accompanied by upregulation of intracellular antioxidative defense, which was further promoted in the presence of benfotiamine. Namely, activated microglia exposed to non-cytotoxic doses of benfotiamine showed increased levels and activities of hydrogen peroxide- and superoxide-removing enzymes—catalase and glutathione system, and superoxide dismutase. In addition, benfotiamine showed the capacity to directly scavenge superoxide radical anion. As a consequence, benfotiamine suppressed the activation of microglia and provoked a decrease in NO and ·O−2 production and lipid peroxidation. In conclusion, benfotiamine might silence pro-oxidative activity of microglia to alleviate/prevent oxidative damage of neighboring CNS cells. PMID:26388737

  11. Low-dose effect of ethanol on locomotor activity induced by activation of the mesolimbic system.

    PubMed

    Milton, G V; Randall, P K; Erickson, C K

    1995-06-01

    Four experiments were designed to study the ability of 0.5 g/kg ethanol (EtOH) intraperitoneally to modify locomotor activity induced by drugs that interact with different sites in the mesolimbic system (MLS) of male Sprague-Dawley rats. Locomotor activity was measured in a doughnut-shaped circular arena after various treatments. EtOH alone did not alter locomotor activity in any of the experiments. Amphetamine (AMP, intraperitoneally or intraaccumbens) increased locomotor activity in a dose-dependent manner, and the presence of EtOH attenuated AMP-induced locomotor activity. Bilateral infusion of GABAA antagonist picrotoxin (PIC) into the ventral tegmental area also increased locomotor activity in a dose-dependent manner, and the presence of EtOH attenuated PIC-induced locomotor activity. On the other hand, the interaction between bilateral infusion of mu-receptor agonist Tyr-D-Ala-Gly-NMe-Phe-Gly-ol (DAGO) and EtOH on locomotor activity is complex. The highest dose of DAGO that significantly increased locomotor activity was not affected by the presence of EtOH. But, with lower doses of DAGO that either had no effect or a small increase in locomotor activity, the combination of EtOH and DAGO increased and attenuated locomotor activity, respectively. Results from this study support our hypothesis that a low dose of EtOH that does not modify behavior can interact with neurotransmitter systems in the brain and modify drug-induced locomotor activity. Modification of this drug-induced locomotor activity by a low dose of EtOH is dependent on the rate of ongoing locomotor behavior induced by drug and the neurotransmitter substrate that the drug modified to induce locomotor behavior.(ABSTRACT TRUNCATED AT 250 WORDS)

  12. Automated Activation and Deactivation of a System Under Test

    NASA Technical Reports Server (NTRS)

    Poff, Mark A.

    2006-01-01

    The MPLM Automated Activation/Deactivation application (MPLM means Multi-Purpose Logistic Module) was created with a three-fold purpose in mind: 1. To reduce the possibility of human error in issuing commands to, or interpreting telemetry from, the MPLM power, computer, and environmental control systems; 2. To reduce the amount of test time required for the repetitive activation/deactivation processes; and 3. To reduce the number of on-console personnel required for activation/ deactivation. All of these have been demonstrated with the release of the software. While some degree of automated end-item commanding had previously been performed for space-station hardware in the test environment, none approached the functionality and flexibility of this application. For MPLM activation, it provides mouse-click selection of the hardware complement to be activated, activates the desired hardware and verifies proper feedbacks, and alerts the user when telemetry indicates an error condition or manual intervention is required. For MPLM deactivation, the product senses which end items are active and deactivates them in the proper sequence. For historical purposes, an on-line log is maintained of commands issued and telemetry points monitored. The benefits of the MPLM Automated Activation/ Deactivation application were demonstrated with its first use in December 2002, when it flawlessly performed MPLM activation in 8 minutes (versus as much as 2.4 hours for previous manual activations), and performed MPLM deactivation in 3 minutes (versus 66 minutes for previous manual deactivations). The number of test team members required has dropped from eight to four, and in actuality the software can be operated by a sole (knowledgeable) system engineer.

  13. Active cooling for downhole instrumentation: Preliminary analysis and system selection

    SciTech Connect

    Bennett, G.A.

    1988-03-01

    A feasibility study and a series of preliminary designs and analyses were done to identify candidate processes or cycles for use in active cooling systems for downhole electronic instruments. A matrix of energy types and their possible combinations was developed and the energy conversion process for each pari was identified. The feasibility study revealed conventional as well as unconventional processes and possible refrigerants and identified parameters needing further clarifications. A conceptual design or series od oesigns for each system was formulated and a preliminary analysis of each design was completed. The resulting coefficient of performance for each system was compared with the Carnot COP and all systems were ranked by decreasing COP. The system showing the best combination of COP, exchangeability to other operating conditions, failure mode, and system serviceability is chosen for use as a downhole refrigerator. 85 refs., 48 figs., 33 tabs.

  14. The Solar System Ballet: A Kinesthetic Spatial Astronomy Activity

    NASA Astrophysics Data System (ADS)

    Heyer, Inge; Slater, T. F.; Slater, S. J.; Astronomy, Center; Education ResearchCAPER, Physics

    2011-05-01

    The Solar System Ballet was developed in order for students of all ages to learn about the planets, their motions, their distances, and their individual characteristics. To teach people about the structure of our Solar System can be revealing and rewarding, for students and teachers. Little ones (and some bigger ones, too) often cannot yet grasp theoretical and spatial ideas purely with their minds. Showing a video is better, but being able to learn with their bodies, essentially being what they learn about, will help them understand and remember difficult concepts much more easily. There are three segments to this activity, which can be done together or separately, depending on time limits and age of the students. Part one involves a short introductory discussion about what students know about the planets. Then students will act out the orbital motions of the planets (and also moons for the older ones) while holding a physical model. During the second phase we look at the structure of the Solar System as well as the relative distances of the planets from the Sun, first by sketching it on paper, then by recreating a scaled version in the class room. Again the students act out the parts of the Solar System bodies with their models. The third segment concentrates on recreating historical measurements of Earth-Moon-Sun system. The Solar System Ballet activity is suitable for grades K-12+ as well as general public informal learning activities.

  15. Integrated active sensor system for real time vibration monitoring

    PubMed Central

    Liang, Qijie; Yan, Xiaoqin; Liao, Xinqin; Cao, Shiyao; Lu, Shengnan; Zheng, Xin; Zhang, Yue

    2015-01-01

    We report a self-powered, lightweight and cost-effective active sensor system for vibration monitoring with multiplexed operation based on contact electrification between sensor and detected objects. The as-fabricated sensor matrix is capable of monitoring and mapping the vibration state of large amounts of units. The monitoring contents include: on-off state, vibration frequency and vibration amplitude of each unit. The active sensor system delivers a detection range of 0–60 Hz, high accuracy (relative error below 0.42%), long-term stability (10000 cycles). On the time dimension, the sensor can provide the vibration process memory by recording the outputs of the sensor system in an extend period of time. Besides, the developed sensor system can realize detection under contact mode and non-contact mode. Its high performance is not sensitive to the shape or the conductivity of the detected object. With these features, the active sensor system has great potential in automatic control, remote operation, surveillance and security systems. PMID:26538293

  16. Integrated active sensor system for real time vibration monitoring.

    PubMed

    Liang, Qijie; Yan, Xiaoqin; Liao, Xinqin; Cao, Shiyao; Lu, Shengnan; Zheng, Xin; Zhang, Yue

    2015-11-05

    We report a self-powered, lightweight and cost-effective active sensor system for vibration monitoring with multiplexed operation based on contact electrification between sensor and detected objects. The as-fabricated sensor matrix is capable of monitoring and mapping the vibration state of large amounts of units. The monitoring contents include: on-off state, vibration frequency and vibration amplitude of each unit. The active sensor system delivers a detection range of 0-60 Hz, high accuracy (relative error below 0.42%), long-term stability (10000 cycles). On the time dimension, the sensor can provide the vibration process memory by recording the outputs of the sensor system in an extend period of time. Besides, the developed sensor system can realize detection under contact mode and non-contact mode. Its high performance is not sensitive to the shape or the conductivity of the detected object. With these features, the active sensor system has great potential in automatic control, remote operation, surveillance and security systems.

  17. 242-A evaporator vacuum condenser system

    SciTech Connect

    Smith, V.A.

    1994-09-28

    This document is written for the 242-A evaporator vacuum condenser system (VCS), describing its purpose and operation within the evaporator. The document establishes the operating parameters specifying pressure, temperature, flow rates, interlock safety features and interfacing sub-systems to support its operation.

  18. Radiation Safety System of the B-Factory at the Stanford Linear Accelerator Center

    SciTech Connect

    Liu, James C.

    1998-10-12

    The radiation safety system (RSS) of the B-Factory accelerator facility at the Stanford Linear Accelerator Center (SLAC) is described. The RSS, which is designed to protect people from prompt radiation exposure due to beam operation, consists of the access control system (ACS) and the radiation containment system (RCS). The ACS prevents people from being exposed to the very high radiation levels inside a beamline shielding housing. The ACS consists of barriers, a standard entry module at every entrance, and beam stoppers. The RCS prevents people from being exposed to the radiation outside a shielding housing, due to either normal or abnormal operation. The RCS consists of power limiting devices, shielding, dump/collimator, and an active radiation monitor system. The inter-related system elements for the ACS and RCS, as well as the associated interlock network, are described. The policies and practices in setting up the RSS are also compared with the regulatory requirements.

  19. Two generations of Canadian active imaging systems: ALBEDOS and ELVISS

    NASA Astrophysics Data System (ADS)

    Larochelle, Vincent; Mathieu, Pierre; Simard, Jean-Robert

    1999-07-01

    Search and rescue and general surveillance mission pose a serious challenge to conventional imaging systems used by actual aircraft crews. These systems must often work in low- light and low-visibility conditions to find the identify targets. A new airborne imaging technology has been developed to overcome several deficiencies encountered with common CCD cameras, image intensified system and thermal imaging sensors. The recent developments in laser diode arrays, laser diode beam collimation and gatable micro- channel plate intensifier have made possible the construction of a compact active imagin system, called the Airborne Laser-Based Enhanced Detection and Observation Systems (ALBEDOS). This system proved particularly efficient at night and in degraded weather conditions. In addition, it was demonstrated that range gating, besides eliminating most of the light backscattered by aerosols, provided to some extent immunity to blooming effects specific to highly sensitive cameras. The system was installed on a helicopter and tested in various scenarios in October 1995 to demonstrate its potential. To enhance the surveillance capability over large areas of coverage, to optimize detection of humans and small objects and to improve the effectiveness of the search aircraft, a second-generation payload is presently developed and combines the benefits of two complementary imaging sensors. The Enhanced Low-Light level Visible and IR Surveillance System (ELVISS) consists of an improved range-gated active imager and a high-quality thermal imager, installed in two separate airborne platforms slaved together and controlled by a single user interface. It is expected that such a sensor systems will have a direct impact on improving the response time in finding those in need of assistance or simply in increasing the performance, reliability and efficiency of crews involved in general surveillance operations. This paper explains the concept of range gating, details a preliminary

  20. Diet Modifies the Neuroimmune System by Influencing Macrophage Activation

    ERIC Educational Resources Information Center

    Sherry, Christina Lynn

    2009-01-01

    It has long been appreciated that adequate nutrition is required for proper immune function and it is now recognized that dietary components contribute to modulation of immune cells, subsequently impacting the whole body's response during an immune challenge. Macrophage activation plays a critical role in the immune system and directs the…

  1. Active coatings technologies for tailorable military coating systems

    NASA Astrophysics Data System (ADS)

    Zunino, J. L., III

    2007-04-01

    The main objective of the U.S. Army's Active Coatings Technologies Program is to develop technologies that can be used in combination to tailor coatings for utilization on Army Materiel. The Active Coatings Technologies Program, ACT, is divided into several thrusts, including the Smart Coatings Materiel Program, Munitions Coatings Technologies, Active Sensor packages, Systems Health Monitoring, Novel Technology Development, as well as other advanced technologies. The goal of the ACT Program is to conduct research leading to the development of multiple coatings systems for use on various military platforms, incorporating unique properties such as self repair, selective removal, corrosion resistance, sensing, ability to modify coatings' physical properties, colorizing, and alerting logistics staff when tanks or weaponry require more extensive repair. A partnership between the U.S. Army Corrosion Office at Picatinny Arsenal, NJ along with researchers at the New Jersey Institute of Technology, NJ, Clemson University, SC, University of New Hampshire, NH, and University of Massachusetts (Lowell), MA, are developing the next generation of Smart Coatings Materiel via novel technologies such as nanotechnology, Micro-electromechanical Systems (MEMS), meta-materials, flexible electronics, electrochromics, electroluminescence, etc. This paper will provide the reader with an overview of the Active Coatings Technologies Program, including an update of the on-going Smart Coatings Materiel Program, its progress thus far, description of the prototype Smart Coatings Systems and research tasks as well as future nanotechnology concepts, and applications for the Department of Defense.

  2. Detection system ensures positive alarm activation in digital message loss

    NASA Technical Reports Server (NTRS)

    Bokros, P.; Burstein, A.; Hewitt, E. D.

    1966-01-01

    Lost Word Detection System /LOWDS/ provides special identification for each error detection message transmitted from receiver to transmitter. The message is identified as an original message or an n-times retransmitted message so the receiver can detect where a retransmission request was not fulfilled and activate an alarm.

  3. Moodog: Tracking Student Activity in Online Course Management Systems

    ERIC Educational Resources Information Center

    Zhang, Hangjin; Almeroth, Kevin

    2010-01-01

    Many universities are currently using Course Management Systems (CMSes) to conduct online learning, for example, by distributing course materials or submitting homework assignments. However, most CMSes do not include comprehensive activity tracking and analysis capabilities. This paper describes a method to track students' online learning…

  4. Active damping control for electrodynamic suspension systems without mechanical transducers

    SciTech Connect

    Brunelli, B.; Casadei, D.; Serra, G.; Tani, A.

    1996-09-01

    In this paper an electrodynamic suspension system for maglev vehicles is analyzed, in which the active damping of the vertical oscillations is obtained without position, velocity and acceleration transducers. The damping effect is accomplished controlling the supply voltage of the damping coil to respond to current changes due to vertical oscillations. The stability of the suspension system is investigated by a linearized analysis of the model equations, emphasizing the influence of the voltage regulator parameters. The performance of the damping system, in terms of step response and ride quality, is also discussed.

  5. Multi-carrier mobile TDMA system with active array antenna

    NASA Technical Reports Server (NTRS)

    Suzuki, Ryutaro; Matsumoto, Yasushi; Hamamoto, Naokazu

    1990-01-01

    A multi-carrier time division multiple access (TDMA) is proposed for the future mobile satellite communications systems that include a multi-satellite system. This TDMA system employs the active array antenna in which the digital beam forming technique is adopted to control the antenna beam direction. The antenna beam forming is carried out at the base band frequency by using the digital signal processing technique. The time division duplex technique is applied for the TDM/TDMA burst format, in order not to overlap transmit and receive timing.

  6. Molecular annotation of ketol-acid reductoisomerases from Streptomyces reveals a novel amino acid biosynthesis interlock mediated by enzyme promiscuity

    PubMed Central

    Verdel-Aranda, Karina; López-Cortina, Susana T; Hodgson, David A; Barona-Gómez, Francisco

    2015-01-01

    The 6-phosphogluconate dehydrogenase superfamily oxidize and reduce a wide range of substrates, making their functional annotation challenging. Ketol-acid reductoisomerase (KARI), encoded by the ilvC gene in branched-chain amino acids biosynthesis, is a promiscuous reductase enzyme within this superfamily. Here, we obtain steady-state enzyme kinetic parameters for 10 IlvC homologues from the genera Streptomyces and Corynebacterium, upon eight selected chemically diverse substrates, including some not normally recognized by enzymes of this superfamily. This biochemical data suggested a Streptomyces biosynthetic interlock between proline and the branched-chain amino acids, mediated by enzyme substrate promiscuity, which was confirmed via mutagenesis and complementation analyses of the proC, ilvC1 and ilvC2 genes in Streptomyces coelicolor. Moreover, both ilvC orthologues and paralogues were analysed, such that the relationship between gene duplication and functional diversification could be explored. The KARI paralogues present in S. coelicolor and Streptomyces lividans, despite their conserved high sequence identity (97%), were shown to be more promiscuous, suggesting a recent functional diversification. In contrast, the KARI paralogue from Streptomyces viridifaciens showed selectivity towards the synthesis of valine precursors, explaining its recruitment within the biosynthetic gene cluster of valanimycin. These results allowed us to assess substrate promiscuity indices as a tool to annotate new molecular functions with metabolic implications. PMID:25296650

  7. Simulation of Magnetic Reconnection in Magnetotail by Interlocking Particle-in-Cell and Magnetohydrodynamics on Hierarchical Mesh

    NASA Astrophysics Data System (ADS)

    Ogawa, T.; Usami, S.; Horiuchi, R.; Den, M.; Yamashita, K.; Tanaka, T.

    2015-12-01

    Magnetic reconnection is a multi-scale phenomenon. Both macroscopic plasma dynamics and microscopic particle kinetics are important there. Numerically, particle methods can deal with micro-scale kinetics, but they generally need much computational resources if one tries to calculate macro-scale by them. On the other hand, magnetohydrodynamics (MHD) can solve macro-scale dynamics efficiently, but it cannot reproduce the phenomenon without an appropriate extension. Usami et al. (2008, 2014) developed a code that uses both Particle-in-Cell (PIC) method and MHD. They divided a computational box into three domains; a PIC domain, a MHD domain and an interaction domain. Both PIC and MHD are calculated in the interaction domain and interlocked. They localized the PIC domain and enabled efficient implementation of simulations. In our previous study, we extended Usami's MHD domain to a hierarchical mesh that is controlled by Adaptive Mesh Refinement (AMR) technique (Ogawa et al. 2014), aiming to connect the local PIC calculation with a global MHD simulation.In this study, we apply the code to a simulation of magnetic reconnection in magnetotail. Outer boundary of the MHD domain is decided by data of another global MHD simulation of Earth's magnetosphere, and it leads to magnetic reconnection in the PIC domain. We will describe our method and show results in our poster.This work was supported by JSPS Grant-in-Aid for Scientific Research (B) 23340182.

  8. Dynamic positioning system based on active disturbance rejection technology

    NASA Astrophysics Data System (ADS)

    Lei, Zhengling; Guo, Chen; Fan, Yunsheng

    2015-08-01

    A dynamically positioned vessel, by the International Maritime Organization (IMO) and the certifying class societies (DNV, ABS, LR, etc.), is defined as a vessel that maintains its position and heading (fixed location or pre-determined track) exclusively by means of active thrusters. The development of control technology promotes the upgrading of dynamic positioning (DP) systems. Today there are two different DP systems solutions available on the market: DP system based on PID regulator and that based on model-based control. Both systems have limited disturbance rejection capability due to their design principle. In this paper, a new DP system solution is proposed based on Active Disturbance Rejection Control (ADRC) technology. This technology is composed of Tracking-Differentiator (TD), Extended State Observer (ESO) and Nonlinear Feedback Combination. On one hand, both TD and ESO can act as filters and can be used in place of conventional filters; on the other hand, the total disturbance of the system can be estimated and compensated by ESO, which therefore enhances the system's disturbance rejection capability. This technology's advantages over other methods lie in two aspects: 1) This method itself can not only achieve control objectives but also filter noisy measurements without other specialized filters; 2) This method offers a new useful approach to suppress the ocean disturbance. The simulation results demonstrate the effectiveness of the proposed method.

  9. Parameter identification for active mass damper controlled systems

    NASA Astrophysics Data System (ADS)

    Chang, C. C.; Wang, J. F.; Lin, C. C.

    2016-09-01

    Active control systems have already been installed in real structures and are able to decrease the wind- and earthquake-induced responses, while the active mass damper (AMD) is one of the most popular types of such systems. In practice, an AMD is generally assembled in- situ along with the construction of a building. In such a case, the AMD and the building is coupled as an entire system. After the construction is completed, the dynamic properties of the AMD subsystem and the primary building itself are unknown and cannot be identified individually to verify their design demands. For this purpose, a methodology is developed to obtain the feedback gain of the AMD controller and the dynamic properties of the primary building based on the complex eigen-parameters of the coupled building-AMD system. By means of the theoretical derivation in state-space, the non-classical damping feature of the system is characterized. This methodology can be combined with any state-space based system identification technique as a procedure to achieve the goal on the basis of the acceleration measurements of the building-AMD system. Results from numerical verifications show that the procedure is capable of extracting parameters and is applicable for AMD implementation practices.

  10. Monoclonal antibody against the active site of caeruloplasmin and the ELISA system detecting active caeruloplasmin.

    PubMed

    Hiyamuta, S; Ito, K

    1994-04-01

    Serum caeruloplasmin deficiency is a characteristic biochemical abnormality found in patients with Wilson's disease, but the mechanism of this disease is unknown. Although the phenylenediamine oxidase activity of serum caeruloplasmin is markedly low in patients with Wilson's disease, mRNA of caeruloplasmin exists to some extent. To investigate the deficiency of caeruloplasmin oxidase activity in Wilson's disease, we generated 14 monoclonal antibodies (MAbs) and selected ID1, which had the strongest reactivity, and ID2, which had neutralizing ability. We also established a system to measure active caeruloplasmin specifically using these MAbs. These MAbs and the system will be useful tools in analyzing the active site of caeruloplasmin in patients with Wilson's disease.

  11. Active control technique of fractional-order chaotic complex systems

    NASA Astrophysics Data System (ADS)

    Mahmoud, Gamal M.; Ahmed, Mansour E.; Abed-Elhameed, Tarek M.

    2016-06-01

    Several kinds of synchronization of fractional-order chaotic complex systems are challenging research topics of current interest since they appear in many applications in applied sciences. Our main goal in this paper is to introduce the definition of modified projective combination-combination synchronization (MPCCS) of some fractional-order chaotic complex systems. We show that our systems are chaotic by calculating their Lyapunov exponents. The fractional Lyapunov dimension of the chaotic solutions of these systems is computed. A scheme is introduced to calculate MPCCS of four different (or identical) chaotic complex systems using the active control technique. Special cases of this type, which are projective and anti C-C synchronization, are discussed. Some figures are plotted to show that MPCCS is achieved and its errors approach zero.

  12. Active and passive calcium transport systems in plant cells

    SciTech Connect

    Sze, H.

    1990-01-01

    The ability to change cytoplasmic Ca{sup 2+} levels ((Ca{sup 2+})) by cells has made this cation a key regulator of many biological processes. Cytoplasmic (Ca{sup 2+}) is determined by the coordination of passive Ca{sup 2+} fluxes which increase cytosolic (Ca{sup 2+}) and active Ca{sup 2+} transport systems that lower cytosolic (Ca{sup 2+}). The mechanisms by which plant cells achieve this is poorly understood. We have initially used isolated vesicles from the plasma membrane or organellar membranes to study Ca{sup 2+} transport systems in oat roots (a monocot) and carrot suspension cells (a dicot). The objectives of the proposal were to identify and characterize active (energy-dependent) and passive calcium transport systems that work together to regulate calcium levels in the cytoplasm of plant cells. 10 figs., 2 tabs.

  13. Automated system for analyzing the activity of individual neurons

    NASA Technical Reports Server (NTRS)

    Bankman, Isaac N.; Johnson, Kenneth O.; Menkes, Alex M.; Diamond, Steve D.; Oshaughnessy, David M.

    1993-01-01

    This paper presents a signal processing system that: (1) provides an efficient and reliable instrument for investigating the activity of neuronal assemblies in the brain; and (2) demonstrates the feasibility of generating the command signals of prostheses using the activity of relevant neurons in disabled subjects. The system operates online, in a fully automated manner and can recognize the transient waveforms of several neurons in extracellular neurophysiological recordings. Optimal algorithms for detection, classification, and resolution of overlapping waveforms are developed and evaluated. Full automation is made possible by an algorithm that can set appropriate decision thresholds and an algorithm that can generate templates on-line. The system is implemented with a fast IBM PC compatible processor board that allows on-line operation.

  14. Active and passive calcium transport systems in plant cells

    SciTech Connect

    Sze, H.

    1991-01-01

    The ability to change cytoplasmic Ca{sup 2+} levels ((Ca{sup 2+})) by cells has made this cation a key regulator of many biological processes. Cytoplasmic (Ca{sup 2+}) is determined by the coordination of passive Ca{sup 2+} fluxes which increase cytosolic (Ca{sup 2+}) and active Ca{sup 2+} transport systems that lower cytosolic (Ca{sup 2+}). The mechanisms by which plant cells achieve this is poorly understood. We have initially used isolated vesicles from the plasma membrane or organellar membranes to study Ca{sup 2+} transport systems in oat roots (a monocot) and carrot suspension cells (a dicot). The objectives of the proposal were to identify and characterize active (energy-dependent) and passive calcium transport systems that work together to regulate calcium levels in the cytoplasm of plant cells.

  15. Toxin activity assays, devices, methods and systems therefor

    DOEpatents

    Koh, Chung-Yan; Schaff, Ulrich Y.; Sommer, Gregory Jon

    2016-04-05

    Embodiments of the present invention are directed toward devices, system and method for conducting toxin activity assay using sedimentation. The toxin activity assay may include generating complexes which bind to a plurality of beads in a fluid sample. The complexes may include a target toxin and a labeling agent, or may be generated due to presence of active target toxin and/or labeling agent designed to be incorporated into complexes responsive to the presence of target active toxin. The plurality of beads including the complexes may be transported through a density media, wherein the density media has a lower density than a density of the beads and higher than a density of the fluid sample, and wherein the transporting occurs, at least in part, by sedimentation. Signal may be detected from the labeling agents of the complexes.

  16. Active stabilization to prevent surge in centrifugal compression systems

    NASA Technical Reports Server (NTRS)

    Epstein, Alan H.; Greitzer, Edward M.; Simon, Jon S.; Valavani, Lena

    1993-01-01

    This report documents an experimental and analytical study of the active stabilization of surge in a centrifugal engine. The aims of the research were to extend the operating range of a compressor as far as possible and to establish the theoretical framework for the active stabilization of surge from both an aerodynamic stability and a control theoretic perspective. In particular, much attention was paid to understanding the physical limitations of active stabilization and how they are influenced by control system design parameters. Previously developed linear models of actively stabilized compressors were extended to include such nonlinear phenomena as bounded actuation, bandwidth limits, and robustness criteria. This model was then used to systematically quantify the influence of sensor-actuator selection on system performance. Five different actuation schemes were considered along with four different sensors. Sensor-actuator choice was shown to have a profound effect on the performance of the stabilized compressor. The optimum choice was not unique, but rather shown to be a strong function of some of the non-dimensional parameters which characterize the compression system dynamics. Specifically, the utility of the concepts were shown to depend on the system compliance to inertia ratio ('B' parameter) and the local slope of the compressor speedline. In general, the most effective arrangements are ones in which the actuator is most closely coupled to the compressor, such as a close-coupled bleed valve inlet jet, rather than elsewhere in the flow train, such as a fuel flow modulator. The analytical model was used to explore the influence of control system bandwidth on control effectiveness. The relevant reference frequency was shown to be the compression system's Helmholtz frequency rather than the surge frequency. The analysis shows that control bandwidths of three to ten times the Helmholtz frequency are required for larger increases in the compressor flow range

  17. Symmetric Active/Active Metadata Service for High Availability Parallel File Systems

    SciTech Connect

    He, X.; Ou, Li; Engelmann, Christian; Chen, Xin; Scott, Stephen L

    2009-01-01

    High availability data storage systems are critical for many applications as research and business become more data-driven. Since metadata management is essential to system availability, multiple metadata services are used to improve the availability of distributed storage systems. Past research focused on the active/standby model, where each active service has at least one redundant idle backup. However, interruption of service and even some loss of service state may occur during a fail-over depending on the used replication technique. In addition, the replication overhead for multiple metadata services can be very high. The research in this paper targets the symmetric active/active replication model, which uses multiple redundant service nodes running in virtual synchrony. In this model, service node failures do not cause a fail-over to a backup and there is no disruption of service or loss of service state. We further discuss a fast delivery protocol to reduce the latency of the needed total order broadcast. Our prototype implementation shows that metadata service high availability can be achieved with an acceptable performance trade-off using our symmetric active/active metadata service solution.

  18. 12 CFR 250.410 - Interlocking relationships between bank and its commingled investment account.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... be an eligible operation for a national bank under his Regulation 9, “Fiduciary Powers of National... commingled investment account. 250.410 Section 250.410 Banks and Banking FEDERAL RESERVE SYSTEM (CONTINUED) BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM (CONTINUED) MISCELLANEOUS...

  19. 12 CFR 250.410 - Interlocking relationships between bank and its commingled investment account.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... be an eligible operation for a national bank under his Regulation 9, “Fiduciary Powers of National... commingled investment account. 250.410 Section 250.410 Banks and Banking FEDERAL RESERVE SYSTEM (CONTINUED) BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM (CONTINUED) MISCELLANEOUS...

  20. Extravehicular Activity System Sizing Analysis Tool (EVAS_SAT)

    NASA Technical Reports Server (NTRS)

    Brown, Cheryl B.; Conger, Bruce C.; Miranda, Bruno M.; Bue, Grant C.; Rouen, Michael N.

    2007-01-01

    An effort was initiated by NASA/JSC in 2001 to develop an Extravehicular Activity System Sizing Analysis Tool (EVAS_SAT) for the sizing of Extravehicular Activity System (EVAS) architecture and studies. Its intent was to support space suit development efforts and to aid in conceptual designs for future human exploration missions. Its basis was the Life Support Options Performance Program (LSOPP), a spacesuit and portable life support system (PLSS) sizing program developed for NASA/JSC circa 1990. EVAS_SAT estimates the mass, power, and volume characteristics for user-defined EVAS architectures, including Suit Systems, Airlock Systems, Tools and Translation Aids, and Vehicle Support equipment. The tool has undergone annual changes and has been updated as new data have become available. Certain sizing algorithms have been developed based on industry standards, while others are based on the LSOPP sizing routines. The sizing algorithms used by EVAS_SAT are preliminary. Because EVAS_SAT was designed for use by members of the EVA community, subsystem familiarity on the part of the intended user group and in the analysis of results is assumed. The current EVAS_SAT is operated within Microsoft Excel 2003 using a Visual Basic interface system.

  1. Augmented reality to enhance an active telepresence system

    NASA Astrophysics Data System (ADS)

    Wheeler, Alison; Pretlove, John R. G.; Parker, Graham A.

    1996-12-01

    Tasks carried out remotely via a telerobotic system are typically complex, occur in hazardous environments and require fine control of the robot's movements. Telepresence systems provide the teleoperator with a feeling of being physically present at the remote site. Stereoscopic video has been successfully applied to telepresence vision systems to increase the operator's perception of depth in the remote scene and this sense of presence can be further enhanced using computer generated stereo graphics to augment the visual information presented to the operator. The Mechatronic Systems and Robotics Research Group have over seven years developed a number of high performance active stereo vision systems culminating in the latest, a four degree-of-freedom stereohead. This carries two miniature color cameras and is controlled in real time by the motion of the operator's head, who views the stereoscopic video images on an immersive head mounted display or stereo monitor. The stereohead is mounted on a mobile robot, the movement of which is controlled by a joystick interface. This paper describes the active telepresence system and the development of a prototype augmented reality (AR) application to enhance the operator's sense of presence at the remote site. The initial enhancements are a virtual map and compass to aid navigation in degraded visual conditions and a virtual cursor that provides a means for the operator to interact with the remote environment. The results of preliminary experiments using the initial enhancements are presented.

  2. Extracellular enzyme activity in a willow sewage treatment system.

    PubMed

    Brzezinska, Maria Swiontek; Lalke-Porczyk, Elżbieta; Kalwasińska, Agnieszka

    2012-12-01

    This paper presents the results of studies on the activity of extra-cellular enzymes in soil-willow vegetation filter soil which is used in the post-treatment of household sewage in an onsite wastewater treatment system located in central Poland. Wastewater is discharged from the detached house by gravity into the onsite wastewater treatment system. It flows through a connecting pipe into a single-chamber septic tank and is directed by the connecting pipe to a control well to be further channelled in the soil-willow filter by means of a subsurface leaching system. Soil samples for the studies were collected from two depths of 5 cm and 1 m from three plots: close to the wastewater inflow, at mid-length of the plot and close to its terminal part. Soil samples were collected from May to October 2009. The activity of the extra-cellular enzymes was assayed by the fluorometric method using 4-methylumbelliferyl and 7-amido-4-methylcoumarin substrate. The ranking of potential activity of the assayed enzymes was the same at 5 cm and 1 m soil depths, i.e. esterase > phosphmomoesterase > leucine-aminopeptidase > β-glucosidase > α-glucosidase. The highest values of enzymatic activity were recorded in the surface layer of the soil at the wastewater inflow and decreased with increasing distance from that point.

  3. Active system area networks for data intensive computations. Final report

    SciTech Connect

    2002-04-01

    The goal of the Active System Area Networks (ASAN) project is to develop hardware and software technologies for the implementation of active system area networks (ASANs). The use of the term ''active'' refers to the ability of the network interfaces to perform application-specific as well as system level computations in addition to their traditional role of data transfer. This project adopts the view that the network infrastructure should be an active computational entity capable of supporting certain classes of computations that would otherwise be performed on the host CPUs. The result is a unique network-wide programming model where computations are dynamically placed within the host CPUs or the NIs depending upon the quality of service demands and network/CPU resource availability. The projects seeks to demonstrate that such an approach is a better match for data intensive network-based applications and that the advent of low-cost powerful embedded processors and configurable hardware makes such an approach economically viable and desirable.

  4. Optically powered active sensing system for Internet Of Things

    NASA Astrophysics Data System (ADS)

    Gao, Chen; Wang, Jin; Yin, Long; Yang, Jing; Jiang, Jian; Wan, Hongdan

    2014-10-01

    Internet Of Things (IOT) drives a significant increase in the extent and type of sensing technology and equipment. Sensors, instrumentation, control electronics, data logging and transmission units comprising such sensing systems will all require to be powered. Conventionally, electrical powering is supplied by batteries or/and electric power cables. The power supply by batteries usually has a limited lifetime, while the electric power cables are susceptible to electromagnetic interference. In fact, the electromagnetic interference is the key issue limiting the power supply in the strong electromagnetic radiation area and other extreme environments. The novel alternative method of power supply is power over fiber (PoF) technique. As fibers are used as power supply lines instead, the delivery of the power is inherently immune to electromagnetic radiation, and avoids cumbersome shielding of power lines. Such a safer power supply mode would be a promising candidate for applications in IOT. In this work, we built up optically powered active sensing system, supplying uninterrupted power for the remote active sensors and communication modules. Also, we proposed a novel maximum power point tracking technique for photovoltaic power convertors. In our system, the actual output efficiency greater than 40% within 1W laser power. After 1km fiber transmission and opto-electric power conversion, a stable electric power of 210mW was obtained, which is sufficient for operating an active sensing system.

  5. Effects of activation of endocannabinoid system on myocardial metabolism.

    PubMed

    Polak, Agnieszka; Harasim, Ewa; Chabowski, Adrian

    2016-01-01

    Endocannabinoids exert their effect on the regulation of energy homeostasis via activation of specific receptors. They control food intake, secretion of insulin, lipids and glucose metabolism, lipid storage. Long chain fatty acids are the main myocardial energy substrate. However, the heart exerts enormous metabolic flexibility emphasized by its ability to utilzation not only fatty acids, but also glucose, lactate and ketone bodies. Endocannabinoids can directly act on the cardiomyocytes through the CB1 and CB2 receptors present in cardiomyocytes. It appears that direct activation of CB1 receptors promotes increased lipogenesis, pericardial steatosis and bioelectrical dysfunction of the heart. In contrast, stimulation of CB2 receptors exhibits cardioprotective properties, helping to maintain appropriate amount of ATP in cardiomyocytes. Furthermore, the effects of endocannabinoids at both the central nervous system and peripheral tissues, such as liver, pancreas, or adipose tissue, resulting indirectly in plasma availability of energy substrates and affects myocardial metabolism. To date, there is little evidence that describes effects of activation of the endocannabinoid system in the cardiovascular system under physiological conditions. In the present paper the impact of metabolic diseases, i. e. obesity and diabetes, as well as the cardiovascular diseases - hypertension, myocardial ischemia and myocardial infarction on the deregulation of the endocannabinoid system and its effect on the metabolism are described. PMID:27333924

  6. Active optics system of the VLT Survey Telescope.

    PubMed

    Schipani, Pietro; Noethe, Lothar; Magrin, Demetrio; Kuijken, Konrad; Arcidiacono, Carmelo; Argomedo, Javier; Capaccioli, Massimo; Dall'Ora, Massimo; D'Orsi, Sergio; Farinato, Jacopo; Fierro, Davide; Holzlöhner, Ronald; Marty, Laurent; Molfese, Cesare; Perrotta, Francesco; Ragazzoni, Roberto; Savarese, Salvatore; Rakich, Andrew; Umbriaco, Gabriele

    2016-03-01

    This paper describes the active optics system of the VLT Survey Telescope, the 2.6-m survey telescope designed for visible wavelengths of the European Southern Observatory at Cerro Paranal, in the Atacama desert. The telescope is characterized by a wide field of view (1.42 deg diameter), leading to tighter active optics than in conventional telescopes, in particular for the alignment requirements. We discuss the effects of typical error sources on the image quality and present the specific solutions adopted for wavefront sensing and correction of the aberrations, which are based on the shaping of a monolithic primary mirror and the positioning of the secondary in five degrees of freedom.

  7. Active other worlds in the Solar System and beyond

    NASA Astrophysics Data System (ADS)

    Forget, François

    2016-04-01

    Over the past decades, space exploration has moved planetology from the field of astronomy to the disciplines of geosciences. A fleet of spacecrafts have discovered and study tens of worlds in our solar system and beyond. Everywhere, we have been surprised by the diversity and the vigour of the geophysical activity, from volcanic eruptions to plasma waves... Every scientists present at EGU could -and should- be interested in the extraterrestrial processes that are discovered and analyzed elsewhere. In our solar system, a variety of clouds and fluid dynamical phenomena can be studied in six terrestrial atmospheres and on four giant planets. Active glaciers are found on Mars and Pluto. Rivers and lakes have sculpted the surface of Titan and Mars. Sometime, we can even study geophysical activity with no equivalent on our planet: ice caps made of frozen atmosphere that erupt in geysers, hazes formed by organic polymers which can completely shroud a moon, etc. We study these active worlds because we are curious and wish to understand our universe and our origins. However, more than ever, two specific motivations drive solar system geosciences in 2016: Firstly, as we become more and more familiar with the other worlds around us, we can use them to better understand our own planet. Throughout the solar system, we can access to data that are simply not available on the Earth, or study active processes that are subtle on Earth but of greater importance elsewhere, so that we can better understand them. Many geophysical concepts and tools developed for the Earth can also be tested on other planets. For instance the numerical Climate Models used to assess Earth's future climate change are applied to other planets. Much is learned from such experiments. Secondly, the time has come to generalize the fundamental lessons that we have learned from the examples in the solar system (including the Earth) to address the countless scientific questions that are -and will be- raised by

  8. Bilateral Activity-Dependent Interactions in the Developing Corticospinal System

    PubMed Central

    Friel, Kathleen M.; Martin, John H.

    2009-01-01

    Activity-dependent competition between the corticospinal (CS) systems in each hemisphere drives postnatal development of motor skills and stable CS tract connections with contralateral spinal motor circuits. Unilateral restriction of motor cortex (M1) activity during an early postnatal critical period impairs contralateral visually guided movements later in development and in maturity. Silenced M1 develops aberrant connections with the contralateral spinal cord whereas the initially active M1, in the other hemisphere, develops bilateral connections. In this study, we determined whether the aberrant pattern of CS tract terminations and motor impairments produced by early postnatal M1 activity restriction could be abrogated by reducing activity-dependent synaptic competition from the initially active M1 later in development. We first inactivated M1 unilaterally between postnatal weeks 5–7. We next inactivated M1 on the other side from weeks 7–11 (alternate inactivation), to reduce the competitive advantage that this side may have over the initially inactivated side. Alternate inactivation redirected aberrant contralateral CS tract terminations from the initially silenced M1 to their normal spinal territories and reduced the density of aberrant ipsilateral terminations from the initially active side. Normal movement endpoint control during visually guided locomotion was fully restored. This reorganization of CS terminals reveals an unsuspected late plasticity after the critical period for establishing the pattern of CS terminations in the spinal cord. Our findings show that robust bilateral interactions between the developing CS systems on each side are important for achieving balance between contralateral and ipsilateral CS tract connections and visuomotor control. PMID:17928450

  9. Hypersonic Vehicle Propulsion System Control Model Development Roadmap and Activities

    NASA Technical Reports Server (NTRS)

    Stueber, Thomas J.; Le, Dzu K.; Vrnak, Daniel R.

    2009-01-01

    The NASA Fundamental Aeronautics Program Hypersonic project is directed towards fundamental research for two classes of hypersonic vehicles: highly reliable reusable launch systems (HRRLS) and high-mass Mars entry systems (HMMES). The objective of the hypersonic guidance, navigation, and control (GN&C) discipline team is to develop advanced guidance and control algorithms to enable efficient and effective operation of these challenging vehicles. The ongoing work at the NASA Glenn Research Center supports the hypersonic GN&C effort in developing tools to aid the design of advanced control algorithms that specifically address the propulsion system of the HRRLSclass vehicles. These tools are being developed in conjunction with complementary research and development activities in hypersonic propulsion at Glenn and elsewhere. This report is focused on obtaining control-relevant dynamic models of an HRRLS-type hypersonic vehicle propulsion system.

  10. An active vision system for multitarget surveillance in dynamic environments.

    PubMed

    Bakhtari, Ardevan; Benhabib, Beno

    2007-02-01

    This paper presents a novel agent-based method for the dynamic coordinated selection and positioning of active-vision cameras for the simultaneous surveillance of multiple objects-of-interest as they travel through a cluttered environment with a-priori unknown trajectories. The proposed system dynamically adjusts not only the orientation but also the position of the cameras in order to maximize the system's performance by avoiding occlusions and acquiring images with preferred viewing angles. Sensor selection and positioning are accomplished through an agent-based approach. The proposed sensing-system reconfiguration strategy has been verified via simulations and implemented on an experimental prototype setup for automated facial recognition. Both simulations and experimental analyses have shown that the use of dynamic sensors along with an effective online dispatching strategy may tangibly improve the surveillance performance of a sensing system.

  11. System design for active vibration control of aerospace structures

    NASA Astrophysics Data System (ADS)

    Shankar, V.; Nagaraja, B. V.; Balasubramaniam, R.; Shree S, Amrutha; Muthaiah, Skanda N.

    2003-10-01

    Instrumentation, electronics, digital signal processing and related software form the basic building blocks of a system for implementation of Active Vibration Control (AVC) for smart aerospace structures. This paper essentially deals with the design, development and implementation of a 4 channel analog input sub-system essentially consisting of charge amplifiers, filters, gain amplifiers & Analog to Digital Converters (ADC), the subsequent Digital Signal Processor (DSP) hardware for implementation of the controller and finally a 4 Channel analog output subsystem consisting of Digital to Analog Converters (DAC), reconstruction filters & high voltage amplifiers. This system essentially interfaces to a structure with piezo-ceramic sensors and actuators for implementation of real time AVC on a smart beam. The paper also highlights some of the new ideas that have been incorporated into the system design.

  12. Blogs and Social Network Sites as Activity Systems: Exploring Adult Informal Learning Process through Activity Theory Framework

    ERIC Educational Resources Information Center

    Heo, Gyeong Mi; Lee, Romee

    2013-01-01

    This paper uses an Activity Theory framework to explore adult user activities and informal learning processes as reflected in their blogs and social network sites (SNS). Using the assumption that a web-based space is an activity system in which learning occurs, typical features of the components were investigated and each activity system then…

  13. Are 1974-1975 automotive belt systems hazardous to children?

    PubMed

    Snyder, R G; O'Neill, B

    1975-08-01

    The 1974 and early-1975 model automobiles are equipped with belt interlock systems that require front outboard seat occupants who weigh more than 21.5 kg (47.3 lb) to wear threepoint lap and diagonal upper-torso belts (or wear the lap belt and position upper-torso belt behind them), assuming that the interlock has not been circumvented. Recent legislation has eliminated the interlock requirement, but new models are still likely to be fitted with three-point restraints for the front outboard seating positions. These restraint systems were designed and tested for adult use. Thus, based on the different structure of a younger child and the fact that there is a wide variation of belt orientation, child size, and seating environments, there is legitimate concern that the upper diagonal belt might contribute to injury of the child under certain impact conditions. PMID:1163506

  14. Advanced extravehicular activity systems requirements definition study. Phase 2: Extravehicular activity at a lunar base

    NASA Technical Reports Server (NTRS)

    Neal, Valerie; Shields, Nicholas, Jr.; Carr, Gerald P.; Pogue, William; Schmitt, Harrison H.; Schulze, Arthur E.

    1988-01-01

    The focus is on Extravehicular Activity (EVA) systems requirements definition for an advanced space mission: remote-from-main base EVA on the Moon. The lunar environment, biomedical considerations, appropriate hardware design criteria, hardware and interface requirements, and key technical issues for advanced lunar EVA were examined. Six remote EVA scenarios (three nominal operations and three contingency situations) were developed in considerable detail.

  15. Coherence and frequency in the reticular activating system (RAS).

    PubMed

    Garcia-Rill, Edgar; Kezunovic, Nebojsa; Hyde, James; Simon, Christen; Beck, Paige; Urbano, Francisco J

    2013-06-01

    This review considers recent evidence showing that cells in the reticular activating system (RAS) exhibit (1) electrical coupling mainly in GABAergic cells, and (2) gamma band activity in virtually all of the cells. Specifically, cells in the mesopontine pedunculopontine nucleus (PPN), intralaminar parafascicular nucleus (Pf), and pontine dorsal subcoeruleus nucleus dorsalis (SubCD) (1) show electrical coupling, and (2) all fire in the beta/gamma band range when maximally activated, but no higher. The mechanism behind electrical coupling is important because the stimulant modafinil was shown to increase electrical coupling. We also provide recent findings demonstrating that all cells in the PPN and Pf have high threshold, voltage-dependent P/Q-type calcium channels that are essential to gamma band activity. On the other hand, all SubCD, and some PPN, cells manifested sodium-dependent subthreshold oscillations. A novel mechanism for sleep-wake control based on transmitter interactions, electrical coupling, and gamma band activity is described. We speculate that continuous sensory input will modulate coupling and induce gamma band activity in the RAS that could participate in the processes of preconscious awareness, and provide the essential stream of information for the formulation of many of our actions.

  16. Exploring creative activity: a software environment for multimedia systems

    NASA Astrophysics Data System (ADS)

    Farrett, Peter W.; Jardine, David A.

    1992-03-01

    This paper examines various issues related to the theory, design, and implementation of a system that supports creative activity for a multimedia environment. The system incorporates artificial intelligence notions to acquire concepts of the problem domain. This paper investigates this environment by considering a model that is a basis for a system, which supports a history of user interaction. A multimedia system that supports creative activity is problematic. It must function as a tool allowing users to experiment dynamically with their own creative reasoning process--a very nebulous task environment. It should also support the acquisition of domain knowledge so that empirical observation can be further evaluated. This paper aims to illustrate that via the reuse of domain-specific knowledge, closely related ideas can be quickly developed. This approach is useful in the following sense: Multimedia navigational systems hardcode referential links with respect to a web or network. Although users can access or control navigation in a nonlinear (static) manner, these referential links are 'frozen' and can not capture their creative actions, which are essential in tutoring or learning applications. This paper describes a multimedia assistant based on the notion of knowledge- links, which allows users to navigate through creative information in a nonlinear (dynamic) fashion. A selection of prototype code based on object-oriented techniques and logic programming partially demonstrates this.

  17. Flight test and performance of a nongated active television system

    NASA Astrophysics Data System (ADS)

    Miller, John L.; Kelly, John M.; Ehlen, Jon

    1999-07-01

    A series of helicopter flight tests were conducted to test the feasibility and assess the performance of a gimbaled active television system and co-located IR system. The laser light was provided to the gimbal via a fiber optic cable from a remote semiconductor laser. A high power, divergent beam was used to illuminate a scene providing enhanced performance in poor weather, the recording of registry and augmentation to existing night vision devices. The flight tests were conducted in clear-weather conditions over land and water. Additionally, a series of ground test were conducted.

  18. Behavioral activation system modulation on brain activation during appetitive and aversive stimulus processing

    PubMed Central

    Ventura-Campos, Noelia; Sanjuán-Tomás, Ana; Belloch, Vicente; Parcet, Maria-Antònia; Ávila, César

    2010-01-01

    The reinforcement sensitivity theory (RST) proposed the behavioral activation system (BAS) as a neurobehavioral system that is dependent on dopamine-irrigated structures and that mediates the individual differences in sensitivity and reactivity to appetitive stimuli associated with BAS-related personality traits. Theoretical developments propose that high BAS sensitivity is associated with both enhanced appetitive stimuli processing and the diminished processing of aversive stimuli. The objective of this study was to analyze how individual differences in BAS functioning were associated with brain activation during erotic and aversive picture processing while subjects were involved in a simple goal-directed task. Forty-five male participants took part in this study. The task activation results confirm the activation of the reward and punishment brain-related structures while viewing erotic and aversive pictures, respectively. The SR scores show a positive correlation with activation of the left lateral prefrontal cortex, the mesial prefrontal cortex and the right occipital cortex while viewing erotic pictures, and a negative correlation with the right lateral prefrontal cortex and the left occipital cortex while viewing aversive pictures. In summary, the SR scores modulate the activity of the cortical areas in the prefrontal and the occipital cortices that are proposed to modulate the BAS and the BIS-FFFS. PMID:20147458

  19. Behavioral activation system modulation on brain activation during appetitive and aversive stimulus processing.

    PubMed

    Barrós-Loscertales, Alfonso; Ventura-Campos, Noelia; Sanjuán-Tomás, Ana; Belloch, Vicente; Parcet, Maria-Antònia; Avila, César

    2010-03-01

    The reinforcement sensitivity theory (RST) proposed the behavioral activation system (BAS) as a neurobehavioral system that is dependent on dopamine-irrigated structures and that mediates the individual differences in sensitivity and reactivity to appetitive stimuli associated with BAS-related personality traits. Theoretical developments propose that high BAS sensitivity is associated with both enhanced appetitive stimuli processing and the diminished processing of aversive stimuli. The objective of this study was to analyze how individual differences in BAS functioning were associated with brain activation during erotic and aversive picture processing while subjects were involved in a simple goal-directed task. Forty-five male participants took part in this study. The task activation results confirm the activation of the reward and punishment brain-related structures while viewing erotic and aversive pictures, respectively. The SR scores show a positive correlation with activation of the left lateral prefrontal cortex, the mesial prefrontal cortex and the right occipital cortex while viewing erotic pictures, and a negative correlation with the right lateral prefrontal cortex and the left occipital cortex while viewing aversive pictures. In summary, the SR scores modulate the activity of the cortical areas in the prefrontal and the occipital cortices that are proposed to modulate the BAS and the BIS-FFFS.

  20. Behavioral activation system modulation on brain activation during appetitive and aversive stimulus processing.

    PubMed

    Barrós-Loscertales, Alfonso; Ventura-Campos, Noelia; Sanjuán-Tomás, Ana; Belloch, Vicente; Parcet, Maria-Antònia; Avila, César

    2010-03-01

    The reinforcement sensitivity theory (RST) proposed the behavioral activation system (BAS) as a neurobehavioral system that is dependent on dopamine-irrigated structures and that mediates the individual differences in sensitivity and reactivity to appetitive stimuli associated with BAS-related personality traits. Theoretical developments propose that high BAS sensitivity is associated with both enhanced appetitive stimuli processing and the diminished processing of aversive stimuli. The objective of this study was to analyze how individual differences in BAS functioning were associated with brain activation during erotic and aversive picture processing while subjects were involved in a simple goal-directed task. Forty-five male participants took part in this study. The task activation results confirm the activation of the reward and punishment brain-related structures while viewing erotic and aversive pictures, respectively. The SR scores show a positive correlation with activation of the left lateral prefrontal cortex, the mesial prefrontal cortex and the right occipital cortex while viewing erotic pictures, and a negative correlation with the right lateral prefrontal cortex and the left occipital cortex while viewing aversive pictures. In summary, the SR scores modulate the activity of the cortical areas in the prefrontal and the occipital cortices that are proposed to modulate the BAS and the BIS-FFFS. PMID:20147458