Science.gov

Sample records for active source experiment

  1. Development of a novel electron source for active space experiments

    NASA Astrophysics Data System (ADS)

    Everding, Daniel

    2013-01-01

    Recent advances in light emitting diode (LED) technology have facilitated a potential remedy to the problems plaguing filament based electron sources. Using spaceworthy LEDs, the photoelectron cathode and its progenitor the ultraviolet cathode (UVC) take advantage of the photoelectric effect to produce electrons for space based experiments. To produce these devices, two species of LED, each producing either ultraviolet or visible radiation, were collected and tested to determine potential photocurrent output. Additionally, materials with requisite photoemission characteristics were collected and tested in vacuum with the LEDs to assess their usefulness as photoelectron sources. Furthermore, circuitry and computer software was compiled, tested, and refined to control the experimental and custodial duties of the UVC and photoelectron cathode while deployed as an electron source in space.

  2. Use of active source geophones for passive source imaging: Examples from Bighorn Arch Seismic Experiment (BASE), USA

    NASA Astrophysics Data System (ADS)

    Sheehan, A.; O'rourke, C. T.; Haines, S. S.; Yang, Z.; Worthington, L. L.; Miller, K. C.

    2013-05-01

    In this paper we explore the variety of active and passive source deep seismic imaging that can be performed using continous wavefield recordings from a dense array of industry-style geophones. The data in this study were acquired during the 2009-10 EarthScope FlexArray Bighorn Arch Seismic Experiment(BASE) in central Wyoming, USA. In addition to traditional active and passive source seismic data acquisition, BASE included a deployment of 850 Reftek RT125 " Texan" dataloggers that produced continuous recording over 14 days. Ground motion was recorded via Geospace GS-11 4.5 Hz single channel vertical component geophones. The geophones were deployed in a grid of three E-W lines and two N-S lines across the Bighorn Mountains. We find that the high frequency geophones effectively record the P waves of teleseismic earthquakes. During the 15 days of continuous recording we observed 57 teleseismic events with pickable P-wave arrivals across the array, providing over 10,000 travel times (P, PKiKP, Pdiff, Pn) suitable for teleseismic tomography. The full waveforms can be used to extract additional information about the subsurface. We have successfully utilized teleseismic receiver-side crustal reverberation phases as virtual sources to mimic crustal reflection profiles (Yang et al., 2012). After depth conversion, we find a coherent phase that correlates well with the top of the Madison Formation under the Powder River and Bighorn Basins that flank the Bighorn Mountains. In addition, we combine the phases PpPdp from single-channel geophone recordings and Ps from three-component recordings to constrain the average Vp /Vs ratio for the sedimentary strata. Following Haines (2011), we are exploring the use of interferometric processing of active source blasts. In principle, virtual source and receiver gathers can be created through cross-correlation of full wavefields. The seismic interferometry provides a means of simulating alternative acquisition geometries, and has the

  3. Preliminary Results from the iMUSH Active Source Seismic Experiment

    NASA Astrophysics Data System (ADS)

    Levander, Alan; Kiser, Eric; Palomeras, Imma; Zelt, Colin; Schmandt, Brandon; Hansen, Steve; Harder, Steven; Creagar, Kenneth; Vidale, John; Abers, Geoffrey

    2015-04-01

    iMUSH (imaging Magma Under Saint Helens) is a US NSF sponsored multi-disciplinary investigation of Mount Saint Helens (MSH), currently the most active volcano in the Cascades arc in the northwestern United States. The project consists of active and passive seismic experiments, extensive magnetotelluric sounding, and geological/geochemical studies involving scientists at 7 institutions in the U.S. and Europe. The long-term goal of the seismic project is to combine analysis of the active source data with that of data from the 70 element broadband seismograph operating from summer 2014 until 2016. Combining seismic and MT analyses with other data, we hope to image the MSH volcanic plumbing system from the surface to the subducting Juan de Fuca slab. Here we describe preliminary results of the iMUSH active source seismic experiment, conducted in July and August 2014. The active source experiment consisted of twenty-three 454 or 908 kg weight shots recorded by ~3500 seismographs deployed at ~6,000 locations. Of these instruments, ~900 Nodal Seismic instruments were deployed continuously for two weeks in an areal array within 10 km of the MSH summit. 2,500 PASSCAL Texan instruments were deployed twice for five days in 3 areal arrays and 2 dense orthogonal linear arrays that extended from MSH to distances > 80 km. Overall the data quality from the shots is excellent. The seismograph arrays also recorded dozens of micro-earthquakes beneath the MSH summit and along the MSH seismic zone, and numerous other local and regional earthquakes. In addition, at least one low frequency event beneath MSH was recorded during the experiment. At this point we have begun various types of analysis of the data set: We have determined an average 1D Vp structure from stacking short-term/long-term average ratios, we have determined the 2-D Vp structure from ray-trace inversions along the two orthogonal profiles (in the NW-SE and NE-SW directions), and we have made low-fold CMP stacks of the

  4. Active Source Tomography of Stromboli Volcano (Italy): Results From the 2006 Seismic Experiment.

    NASA Astrophysics Data System (ADS)

    Zuccarello, L.; Patanè, D.; Cocina, O.; Castellano, M.; Sgroi, T.; Favali, P.; de Gori, P.

    2008-12-01

    Stromboli island, located in the Southern Tyrrhenian sea, is the emerged part (about 900 m a.s.l.) of a 3km-high strato-volcano. Its persistent Strombolian activity, documented for over 2000 years, is sometimes interrupted by lava effusions or major explosions. Despite the amount of recent published geophysical studies aimed to clarifying eruption dynamics, the spatial extend and geometrical characteristics of the plumbing system remain poorly understood. In fact, the knowledge of the inner structure and the zones of magma storage is limited to the upper few hundreds meters of the volcanic edifice and P- and S-waves velocity models are available only in restricted areas. In order to obtain a more suitable internal structural and velocity models of the volcano, from 25 November to 2 December 2006, a seismic tomography experiment through active seismics using air-gun sources was carried out and the final Vp model is here presented. The data has been inverted for the Vp structure by using the code Simulps13q, considering a 3D grid of nodes spaced 0.5 km down to 2 km depth, beneath the central part of volcano. The results show a relatively high velocity zones located both in the inner part of the volcanic structure, at about 1km b.s.l. and in the last 200-300 m a.s.l. in correspondence with the volcanic conduit. Slower zones were located around the summit craters in agreement with volcanological and petrological informations for the area. The relatively high velocity zones could suggest the presence of intrusive bodies related to the plumbing system.

  5. Field Report on the iMUSH Active Source Seismic Experiment

    NASA Astrophysics Data System (ADS)

    Kiser, E.; Levander, A.; Schmandt, B.; Palomeras, I.; Harder, S. H.; Creager, K. C.; Vidale, J. E.; Malone, S. D.

    2014-12-01

    In the second half of July we completed the iMUSH active source seismic experiment, one component of the Imaging Magma Under Saint Helens project. A team of ~75 volunteers deployed 3500 seismographs to ~5920 locations on and around Mount St. Helens over the course of 3 weeks. This instrument deployment was accompanied by 23 shots distributed around the volcano. Instrumentation consisted of ~2550 Reftek 125A (Texan) seismographs with 4.5 Hz geophones, and 920 Nodal Seismic recorders with 10 Hz geophones. The shots were also recorded by the permanent stations of the Pacific Northwest Seismograph Network and 70 iMUSH broadband seismographs. Fifteen of the shots, 424 kg each, formed two rings around Mount Saint Helens at 15 km and 30 km radius from the summit. Eight of the shots, 828 kg each, were fired at distances of 50 to 80 km from MSH on NW-SE and NE-SW azimuths. The deployment geometry consisted of two lines oriented NW/SE and NE/SW, and three arrays. The offset of the lines ranged from 150 km to 190 km with an average spacing of 200 m. The first array was centered on the volcano with a radius of 30 km, and required both driving and hiking to deploy. Arrays two and three were set out with, and centered on, the NW/SE line. These arrays had a distance range from MSH of 30-75 km and an azimuth range of about 100 degrees. In addition to this large-scale deployment, we set out 7 beamforming arrays approximately collocated with iMUSH broadband seismographs, and above clusters of seismicity in the region. The aperture of these arrays was about 1 km with an instrument spacing of 100 m. The final deployment ended only days before the AGU abstract deadline, so we have not yet examined all of the data. However, the preliminary indications are that signal to noise is excellent: The shots, several of which registered on PNSN as ML>2.1, carried across the entire array, and were recorded as far away as Seattle and Corvallis on permanent stations. The array also recorded a

  6. High-flux white neutron source based on p(35)-Be reactions for activation experiments at NPI

    NASA Astrophysics Data System (ADS)

    Stefanik, Milan; Bem, Pavel; Gotz, Miloslav; Katovsky, Karel; Majerle, Mitja; Novak, Jan; Simeckova, Eva

    2014-11-01

    The concept of International Fusion Material Irradiation Facility (IFMIF) is based on the d(40)-Li neutron source reaction which produces the white neutron spectrum with mean energy of 14 MeV, energy range with high intensity of neutron beam up to 35 MeV, and weak tail up to 55 MeV. At the Nuclear Physics Institute of the ASCR in Rez near Prague, the source reaction of p+Be was investigated for proton energy of 35 MeV and beam current intensity of 9.2 μA. The produced white spectrum with neutron flux up to 1011 cm-2 s-1 was determined by the dosimetry foils activation technique at two sample-to-target distances and validated against the Monte Carlo predictions. The neutron field of these high-flux p(35)-Be white neutron source represents the useful tool for experimental simulation of the spectrum of the IFMIF facility, validating the activation cross-section data in the energy range relevant to the IFMIF, studying the radiation hardness of electronics against the high-energy neutron fields, and various activation experiments.

  7. Theoretical and practical considerations for the design of the iMUSH active-source seismic experiment

    NASA Astrophysics Data System (ADS)

    Kiser, E.; Levander, A.; Harder, S. H.; Abers, G. A.; Creager, K. C.; Vidale, J. E.; Moran, S. C.; Malone, S. D.

    2013-12-01

    The multi-disciplinary imaging of Magma Under St. Helens (iMUSH) experiment seeks to understand the details of the magmatic system that feeds Mount St. Helens using active- and passive-source seismic, magnetotelluric, and petrologic data. The active-source seismic component of this experiment will take place in the summer of 2014 utilizing all of the 2600 PASSCAL 'Texan' Reftek instruments which will record twenty-four 1000-2000 lb shots distributed around the Mount St. Helens region. The instruments will be deployed as two consecutive refraction profiles centered on the volcano, and a series of areal arrays. The actual number of areal arrays, as well as their locations, will depend strongly on the length of the experiment (3-4 weeks), the number of instrument deployers (50-60), and the time it will take per deployment given the available road network. The current work shows how we are balancing these practical considerations against theoretical experiment designs in order to achieve the proposed scientific goals with the available resources. One of the main goals of the active-source seismic experiment is to image the magmatic system down to the Moho (35-40 km). Calculating sensitivity kernels for multiple shot/receiver offsets shows that direct P waves should be sensitive to Moho depths at offsets of 150 km, and therefore this will likely be the length of the refraction profiles. Another primary objective of the experiment is to estimate the locations and volumes of different magma accumulation zones beneath the volcano using the areal arrays. With this in mind, the optimal locations of these arrays, as well as their associated shots, are estimated using an eigenvalue analysis of the approximate Hessian for each possible experiment design. This analysis seeks to minimize the number of small eigenvalues of the approximate Hessian that would amplify the propagation of data noise into regions of interest in the model space, such as the likely locations of magma

  8. Active seismic experiment

    NASA Technical Reports Server (NTRS)

    Kovach, R. L.; Watkins, J. S.; Talwani, P.

    1972-01-01

    The Apollo 16 active seismic experiment (ASE) was designed to generate and monitor seismic waves for the study of the lunar near-surface structure. Several seismic energy sources are used: an astronaut-activated thumper device, a mortar package that contains rocket-launched grenades, and the impulse produced by the lunar module ascent. Analysis of some seismic signals recorded by the ASE has provided data concerning the near-surface structure at the Descartes landing site. Two compressional seismic velocities have so far been recognized in the seismic data. The deployment of the ASE is described, and the significant results obtained are discussed.

  9. iMUSH: The design of the Mount St. Helens high-resolution active source seismic experiment

    NASA Astrophysics Data System (ADS)

    Kiser, Eric; Levander, Alan; Harder, Steve; Abers, Geoff; Creager, Ken; Vidale, John; Moran, Seth; Malone, Steve

    2013-04-01

    Mount St. Helens is one of the most societally relevant and geologically interesting volcanoes in the United States. Although much has been learned about the shallow structure of this volcano since its eruption in 1980, important questions still remain regarding its magmatic system and connectivity to the rest of the Cascadia arc. For example, the structure of the magma plumbing system below the shallowest magma chamber under the volcano is still only poorly known. This information will be useful for hazard assessment for the southwest Washington area, and also for gaining insight into fundamental scientific questions such as the assimilation and differentiation processes that lead to the formation of continental crust. As part of the multi-disciplinary imaging of Magma Under St. Helens (iMUSH) experiment, funded by NSF GeoPRISMS and EarthScope, an active source seismic experiment will be conducted in late summer 2014. The experiment will utilize all of the 2600 IRIS/PASSCAL/USArray Texan instruments. The instruments will be deployed as two 1000-instrument consecutive refraction profiles (one N/S and one WNW/ESE). Each of these profiles will be accompanied by two 1600-instrument areal arrays at varying distances from Mount St. Helens. Finally, one 2600-instrument areal array will be centered on Mount St. Helens. These instruments will record a total of twenty-four 500-1000 kg shots. Each refraction profile will have an average station spacing of 150 m, and a total length of 150 km. The stations in the areal arrays will be separated by ~1 km. A critical step in the success of this project is to develop an experimental setup that can resolve the most interesting aspects of the magmatic system. In particular, we want to determine the distribution of shot locations that will provide good coverage throughout the entire model space, while still allowing us to focus on regions likely to contain the magmatic plumbing system. In this study, we approach this problem by

  10. SOURCE PHENOMENOLOGY EXPERIMENTS IN ARIZONA

    SciTech Connect

    Jessie L. Bonner; Brian Stump; Mark Leidig; Heather Hooper; Xiaoning Yang; Rongmao Zhou; Tae Sung Kim; William R. Walter; Aaron Velasco; Chris Hayward; Diane Baker; C. L. Edwards; Steven Harder; Travis Glenn; Cleat Zeiler; James Britton; James F. Lewkowicz

    2005-09-30

    The Arizona Source Phenomenology Experiments (SPE) have resulted in an important dataset for the nuclear monitoring community. The 19 dedicated single-fired explosions and multiple delay-fired mining explosions were recorded by one of the most densely instrumented accelerometer and seismometer arrays ever fielded, and the data have already proven useful in quantifying confinement and excitation effects for the sources. It is very interesting to note that we have observed differences in the phenomenology of these two series of explosions resulting from the differences between the relatively slow (limestone) and fast (granodiorite) media. We observed differences at the two SPE sites in the way the rock failed during the explosions, how the S-waves were generated, and the amplitude behavior as a function of confinement. Our consortium's goal is to use the synergy of the multiple datasets collected during this experiment to unravel the phenomenological differences between the two emplacement media. The data suggest that the main difference between single-fired chemical and delay-fired mining explosion seismograms at regional distances is the increased surface wave energy for the latter source type. The effect of the delay-firing is to decrease the high-frequency P-wave amplitudes while increasing the surface wave energy because of the longer source duration and spall components. The results suggest that the single-fired explosions are surrogates for nuclear explosions in higher frequency bands (e.g., 6-8 Hz Pg/Lg discriminants). We have shown that the SPE shots, together with the mining explosions, are efficient sources of S-wave energy, and our next research stage is to postulate the possible sources contributing to the shear-wave energy.

  11. Infrasound Generation from the Source Physics Experiments

    NASA Astrophysics Data System (ADS)

    Preston, L. A.; Schramm, K. A.; Jones, K. R.

    2015-12-01

    Understanding the acoustic and infrasound source generation mechanisms from underground explosions is of great importance for usage of this unique data type in non-proliferation activities. One of the purposes of the Source Physics Experiments (SPE), a series of underground explosive shots at the Nevada National Security Site (NNSS), is to gain an improved understanding of the generation and propagation of physical signals, such as seismic and infrasound, from the near to far field. Two of the SPE shots (SPE-1 and SPE-4') were designed to be small "Green's Function" sources with minimal spall or permanent surface deformation. We analyze infrasound data collected from these two shots at distances from ~300 m to ~1 km and frequencies up to 20 Hz. Using weather models based upon actual observations at the times of these sources, including 3-D variations in topography, temperatures, pressures, and winds, we synthesized full waveforms using Sandia's moving media acoustic propagation simulation suite. Several source mechanisms were simulated and compared and contrasted with observed waveforms using full waveform source inversion. We will discuss results of these source inversions including the relative roll of spall from these small explosions. Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000.

  12. Extravehicular activity welding experiment

    NASA Technical Reports Server (NTRS)

    Watson, J. Kevin

    1989-01-01

    The In-Space Technology Experiments Program (INSTEP) provides an opportunity to explore the many critical questions which can only be answered by experimentation in space. The objective of the Extravehicular Activity Welding Experiment definition project was to define the requirements for a spaceflight experiment to evaluate the feasibility of performing manual welding tasks during EVA. Consideration was given to experiment design, work station design, welding hardware design, payload integration requirements, and human factors (including safety). The results of this effort are presented. Included are the specific objectives of the flight test, details of the tasks which will generate the required data, and a description of the equipment which will be needed to support the tasks. Work station requirements are addressed as are human factors, STS integration procedures and, most importantly, safety considerations. A preliminary estimate of the cost and the schedule for completion of the experiment through flight and postflight analysis are given.

  13. Active Seismic Imaging Experiment

    NASA Astrophysics Data System (ADS)

    Berge, Patricia A.; Dawson, Phillip B.; Evans, John R.

    In September 1985 the U.S. Geological Survey (USGS) and Lawrence Livermore National Laboratory (LLNL) will conduct an active seismic experiment in the Medicine Lake area of northern California. The work is supported by the Geothermal Research Program of USGS and by the Geothermal and Hydropower Technologies Division of the U.S. Department of Energy. We invite interested organizations or individuals to record our explosions from Medicine Lake volcano and surrounding areas not covered by the USGS-LLNL array.

  14. Characterization of the Source Physics Experiment Site

    NASA Astrophysics Data System (ADS)

    Sussman, A. J.; Schultz-Fellenz, E. S.; Broome, S. T.; Townsend, M.; Abbott, R. E.; Snelson, C. M.; Cogbill, A. H.; Conklin, G.; Mitra, G.; Sabbeth, L.

    2012-12-01

    Designed to improve long-range treaty monitoring capabilities, the Source Physics Experiments, conducted at the Nevada National Security Site, also provide an opportunity to advance near-field monitoring and field-based investigations of suspected underground test locations. In particular, features associated with underground testing can be evaluated using Source Physics Experiment activities as analogs, linking on-site inspections with remote sensing technologies. Following a calibration shot (SPE 1), SPE 2 (10/2011) and SPE 3 (07/2012) were performed in the same emplacement hole with 1.0 ton of explosives at 150 ft depth. Because one of the goals of the Source Physics Experiments is to determine damage effects on seismic wave propagation and improve modeling capabilities, a key component in the predictive component and ultimate validation of the models is a full understanding of the intervening geology between the source and instrumented bore holes. Ground-based LIDAR and fracture mapping, mechanical properties determined via laboratory testing of rock core, discontinuity analysis and optical microscopy of the core rocks were performed prior to and following each experiment. In addition, gravity and magnetic data were collected between SPE 2 and 3. The source region of the explosions was also characterized using cross-borehole seismic tomography and vertical seismic profiling utilizing two sets of two boreholes within 40 meters of ground zero. The two sets of boreholes are co-linear with the explosives hole in two directions. Results of the LIDAR collects from both SPE 2 and 3 indicate a permanent ground displacement of up to several centimeters aligning along the projected surface traces of two faults observed in the core and fractures mapped at the surface. Laboratory testing and optical work show a difference in the characteristics of the rocks below and above 40 feet and within the fault zones.The estimated near-surface densities from the gravity survey show

  15. Juan de Fuca Plate Ridge-to-Trench Experiment: initial results from active source seismic imaging of the Juan de Fuca plate and Cascadia fore-arc (Invited)

    NASA Astrophysics Data System (ADS)

    Carbotte, S. M.; Canales, J.; Carton, H. D.; Han, S.; Gibson, J. C.; Janiszewski, H. A.; Horning, G.; Nedimovic, M. R.; Abers, G. A.; Trehu, A. M.

    2013-12-01

    Active source seismic data were acquired during the Juan de Fuca Ridge-to-Trench experiment (June-July 2012) to characterize the evolution and structure of the Juan de Fuca plate from formation at the ridge, through evolution in the plate interior, to subduction at the Cascadia trench. The survey provides plate-scale images of the sediments, crust, and shallowest mantle along two ridge-perpendicular transects, one extending from Axial seamount to the Oregon margin near Hydrate Ridge and the other from near Endeavour segment to Grays Harbor offshore Washington. In addition, a 450 km long trench-parallel line ~10 km seaward of the Cascadia deformation front was acquired to characterize variations in plate structure along the margin. Coincident long-streamer (8 km) multi-channel seismic (MCS) and wide-angle ocean bottom seismometer (OBS) data were collected along each transect. Using these data, our current investigations focus on the properties of the thick sediment blanket covering the Juan de Fuca plate and evidence for fluid flow at the deformation front, crustal structure within the plate interior and near the deformation front, and tracking the downgoing plate beneath the margin. Highlights include the discovery of numerous pockmarks on the seafloor providing evidence of active fluid flow up to 60 km west of the deformation front. Along the Oregon transect, a bright decollement horizon is imaged at ~1sec twtt above basement whereas at the Washington margin, protothrusts of the deformation front reach to the top of the oceanic crust. Variations in sediment properties are documented within the margin-parallel transect with changes in the stratigraphic level of decollement. While crustal thickness is quite uniform along the margin (~ 6 km), variations in crustal reflectivity and in shallowest mantle velocities are observed over ~30-50 km length scales that could be related to structural variations in the Cascadia subduction zone. Further landward, the top of the

  16. Agencies and Sources for Finding a Job. Cooperative Work Experience Learning Activity Packet: Series on Job Entry and Adjustment; Packet One.

    ERIC Educational Resources Information Center

    Herschbach, Dennis R.; And Others

    This student booklet is first in an illustrated series of eleven learning activity packets for use in teaching job hunting and application procedures and the management of wages to secondary students. Focus in this booklet centers on the following sources and agencies that may provide assistance in finding a job: schools, family and friends,…

  17. SPALLATION NEUTRON SOURCE OPERATIONAL EXPERIENCE AT 1 MW

    SciTech Connect

    Galambos, John D

    2011-01-01

    The Spallation Neutron Source (SNS) has been operating at the MW level for about one year. Experience in beam loss control and machine activation at this power level is presented. Also experience with machine protection systems is reviewed, which is critical at this power level. One of the most challenging operational aspects of high power operation has been attaining high availability, which is also discussed

  18. Bell experiments with random destination sources

    SciTech Connect

    Sciarrino, Fabio; Mataloni, Paolo; Vallone, Giuseppe; Cabello, Adan

    2011-03-15

    It is generally assumed that sources randomly sending two particles to one or two different observers, random destination sources (RDSs), cannot be used for genuine quantum nonlocality tests because of the postselection loophole. We demonstrate that Bell experiments not affected by the postselection loophole may be performed with (i) an RDS and local postselection using perfect detectors, (ii) an RDS, local postselection, and fair sampling assumption with any detection efficiency, and (iii) an RDS and a threshold detection efficiency required to avoid the detection loophole. These results allow the adoption of RDS setups which are simpler and more efficient for long-distance free-space Bell tests, and extend the range of physical systems which can be used for loophole-free Bell tests.

  19. Assessing the role of fluids in episodic tremor and slip events using active seismic sources: results from a prototype experiment in Cascadia (Invited)

    NASA Astrophysics Data System (ADS)

    Niu, F.; Silver, P. G.; Nigbor, R.

    2009-12-01

    Recently, the so-called episodic tremor and slip (ETS) that consist of seismically recorded tremor events with characteristic frequencies of 1-15 Hz and slow slip events observed by GPS and strainmeters with durations of order weeks were widely observed in a variety of environments worldwide. While the community continues to make interesting observations, the underlying physical process remains poorly understood. There have been many proposed mechanisms, most of which invoke fluids. Many observations suggest that ETS can be triggered by very small stresses despite the high confining pressures at the depth of ETS, which has led many to conclude that fluids at the slab interface are under lithostatic pressure, and that furthermore there is likely fluid flow at the time of ETS events. Thus far, there is little data with which to evaluate these ideas. We have been interested in determining whether or not there are spatiotemporal structural changes in the crust and upper-most mantle associated with this phenomenon. We conducted a control-source experiment in Cascadia to examine the feasibility of using the reflection/scattering waves from the slab interface to look for structural changes that may reflect the migration of fluids. We selected a highly repeatable source, an eccentric-mass “shaker” designed for engineering studies, as the seismic source. The shaker was provided by NEES@UCLA. A 15’x15’ cement pad for installing the shaker was built on basaltic bedrock that is part of the Tertiary volcanic rocks of the Crescent Formation. We deployed arrays of short period instruments at two distances from the source: 30km and 90km away. The 90km array was deployed at the site of a previous deployment of the A of A team at Big Skidder Hill. Including our stations and those of A of A, we had 32 seismometers in all. The array has a station spacing of 60-100 m and an aperture about 1 to 1.5 km. During our experiment period, we were able to record a quarry blast near our

  20. A three-dimensional Vp, Vs, and Vp/Vs crustal structure in Fujian, Southeast China, from active- and passive-source experiments

    NASA Astrophysics Data System (ADS)

    Cai, Hui-Teng; Kuo-Chen, Hao; Jin, Xin; Wang, Chien-Ying; Huang, Bor-Shouh; Yen, Horng-Yuan

    2015-11-01

    Fujian, Southeastern China, has experienced multistage tectonic activities since the Neoproterozoic Era and is currently influenced by collision between the Eurasian and Philippine Sea plates. Topography, fault zones, and patterns of seismicity are the imprints of tectonic evolution. Historically, there have been several catastrophic earthquakes in the southeastern part of Fujian. To understand the crustal structure related to the fault zones, we performed Vp, Vs, and Vp/Vs travel-time tomography using joint inversion of active and passive sources. A total of 75,827 and 31,044 arrivals of P and S waves, respectively, from 33 explosions and 2543 earthquakes are used in our study. As a result, seismicity has indicated that two NE strike seismogenic zones, the Zhenghe-Dapu and Changle-Zhaoan fault zones, are currently active. Low Vp/Vs ratios in inland Fujian imply that the crust is mainly composed of felsic rocks as part of the Eurasian continental crust, which is consistent with geological observations at the surface. Based on Vp tomography, the thickness of the crust along the coastline is shallower than that on land, which is related to higher heat flow and the Bouguer anomaly. This shallow crust phenomenon near the coastline could be related to the regional extensional stress: the remaining structure of the back-arc extension that stretched the continental crust during the Mesozoic Era or/and the Cenozoic extension due to South China sea opening in Taiwan Strait.

  1. Vehicular sources in acoustic propagation experiments

    NASA Technical Reports Server (NTRS)

    Prado, Gervasio; Fitzgerald, James; Arruda, Anthony; Parides, George

    1990-01-01

    One of the most important uses of acoustic propagation models lies in the area of detection and tracking of vehicles. Propagation models are used to compute transmission losses in performance prediction models and to analyze the results of past experiments. Vehicles can also provide the means for cost effective experiments to measure acoustic propagation conditions over significant ranges. In order to properly correlate the information provided by the experimental data and the propagation models, the following issues must be taken into consideration: the phenomenology of the vehicle noise sources must be understood and characterized; the vehicle's location or 'ground truth' must be accurately reproduced and synchronized with the acoustic data; and sufficient meteorological data must be collected to support the requirements of the propagation models. The experimental procedures and instrumentation needed to carry out propagation experiments are discussed. Illustrative results are presented for two cases. First, a helicopter was used to measure propagation losses at a range of 1 to 10 Km. Second, a heavy diesel-powered vehicle was used to measure propagation losses in the 300 to 2200 m range.

  2. Alternative Energy Sources. Experiments You Can Do...from Edison.

    ERIC Educational Resources Information Center

    Benrey, Ronald M.; Schultz, Robert F.

    Eight experiments dealing with alternative energy sources are presented. Each experiment includes an introductory section which provides background information and discusses the promises and problems of the particular energy source, a list of materials needed to complete the experiment, and the procedures to be used. The experiments involve:…

  3. Aging, source memory, and the experience of "remembering".

    PubMed

    Kuhlmann, Beatrice G; Boywitt, C Dennis

    2016-07-01

    In a previous study, we found source memory for perceptual features to differentiate between younger but not older adults' reports of recollective ("remember"; R) and "know" (K) experiences. In two experiments with younger (17-30 years) and older (64-81 years) participants, we examined whether memory for meaningful speaker sources would accompany older adults' recollective experience. Indeed, memory for male and female speakers (but not partial memory for gender; Experiment 1) as well as bound memory for speakers and their facial expressions (Experiment 2) distinguished between both younger and older adults' RK reports. Thus, memory for some sources forms a common basis for younger and older adults' retrieval experience. Nonetheless, older adults still showed lower objective source memory and lower subjective source-attribution confidence than younger adults when reporting recollective experiences, suggesting that source memory is less relevant to their retrieval experience than for younger adults. PMID:26653292

  4. Apollo experience report: Safety activities

    NASA Technical Reports Server (NTRS)

    Rice, C. N.

    1975-01-01

    A description is given of the flight safety experiences gained during the Apollo Program and safety, from the viewpoint of program management, engineering, mission planning, and ground test operations was discussed. Emphasis is placed on the methods used to identify the risks involved in flight and in certain ground test operations. In addition, there are discussions on the management and engineering activities used to eliminate or reduce these risks.

  5. Gamma source for active interrogation

    DOEpatents

    Leung, Ka-Ngo; Lou, Tak Pui; Barletta, William A.

    2009-09-29

    A cylindrical gamma generator includes a coaxial RF-driven plasma ion source and target. A hydrogen plasma is produced by RF excitation in a cylindrical plasma ion generator using an RF antenna. A cylindrical gamma generating target is coaxial with the ion generator, separated by plasma and extraction electrodes which has many openings. The plasma generator emanates ions radially over 360.degree. and the cylindrical target is thus irradiated by ions over its entire circumference. The plasma generator and target may be as long as desired.

  6. Gamma source for active interrogation

    SciTech Connect

    Leung, Ka-Ngo; Lou, Tak Pui; Barletta, William A.

    2012-10-02

    A cylindrical gamma generator includes a coaxial RF-driven plasma ion source and target. A hydrogen plasma is produced by RF excitation in a cylindrical plasma ion generator using an RF antenna. A cylindrical gamma generating target is coaxial with the ion generator, separated by plasma and extraction electrodes which has many openings. The plasma generator emanates ions radially over 360.degree. and the cylindrical target is thus irradiated by ions over its entire circumference. The plasma generator and target may be as long as desired.

  7. IRIS Controlled Source Seismic Experiments: Continental Structure, Instrumentation, and Education

    NASA Astrophysics Data System (ADS)

    Mooney, W. D.; Keller, G. R.

    2004-12-01

    The controlled-source seismology program of IRIS/PASSCAL has made major contributions to the study of continental structure and evolution. It has also undergone major developments in seismic instrumentation. The first PASSCAL experiments (1984/85) targeted the Basin and Range Province and the Ouachita orogenic belt. The Basin and Range study provided remarkably clear images of this thin, highly-extended crust, while the Ouachita experiment tested competing hypotheses for the deep structure of this Paleozoic orogen. However, both of these projects were limited by a lack of seismic instruments. The situation improved in the late 1980's with the benefit of a mixed array of 600 seismic recorders from the USGS, Stanford, and the Geological Survey of Canada. The resolution achieved with these instruments was revolutionary. Results include the imaging of such remarkable features as crustal-scale duplexes in the Brooks Range compressional orogen of northern Alaska, and of crustal "core complexes" in the extended crust of southwest Arizona. The 3-channel PASSCAL Jr. instrument was developed, leading to experiments in which ˜1000 instruments were deployed, including three-component recording. This complex mix of instruments served the community well for several years, but required large, complex instrument centers and lots of technical support. With input from PASSCAL and the international community, a newly designed, compact instrument (the Texan) was finalized in the spring of 1998, and the first 200 instruments was delivered to the Univ. of Texas-El Paso in late 1998. The present instrument pool of Texans exceeds 1,400 and these have been used on such projects as the high-resolution imaging of the Los Angeles and San Fernando basins (LARSE I and II experiments), where active thrust faults have been imaged. Controlled-source seismic experiments are now very numerous. During calendar year 2004 alone, portable Texan instruments have traveled from Venezuela to Denmark

  8. Romanian Experience in The Conditioning of Radium Sources

    SciTech Connect

    Dogaru, Gh.; Dragolici, F.; Rotarescu, Gh.; Nicu, M.

    2008-07-01

    Ra{sup 226} first radionuclide separated from pitchblende in 1898 by Pierre and Marie Curie was successfully used in medicine, industry as in other fields being the only one available radionuclide till 1940 when were produced other radionuclides in accelerators. On long term the use of Ra{sup 226} sealed sources are not any more safe due to: the high specific activity, long half live, decays in Rn{sup 226} gas which increases the internal pressure of capsule leading in time to the leakage, the salts as raw materials from which the sealed sources are manufactured are soluble, there is a leak of information and records on the manufacture and operation. Based on this consideration in Romania regulatory authority did not authorized any more the use of these sealed sources [1]. The paper presents some aspects from Romanian experience related to the collection and conditioning of radium sealed sources. Data relating the radium inventory as well as the arrangements made in order to create a workshop for the conditioning of radium sources are presented. (authors)

  9. Operating experience with the LBL ECR source

    SciTech Connect

    Lyneis, C.M.

    1987-12-01

    The overall performance of the LBL ECR source in providing beam for the 88-Inch Cyclotron has been excellent. However, during the past two years there have been some fluctuations in the peak performance, particularly for the highest charge states. Among the factors which influence the peak performance are coatings from solid feeds or gases such as SiH/sub 4/ or CO/sub 2/, changes in first stage output, and variation in outgassing rates on the wall. Modifications made to the source have also affected its performance. In the plasma chamber the screens between the sextupole bars were removed to lower its Q/sub 0/. When the 9.2 GHz klystron used to power the first stage failed, it was replaced by a 10.3 GHz klystron. Tests were also made using 6.4 GHz to drive both first and second stages. The source performance in these various configuration will be reviewed.

  10. Advanced Light Source Activity Report 2000

    SciTech Connect

    Greiner, A.; Moxon, L.; Robinson, A.; Tamura, L.

    2001-04-01

    This is an annual report, detailing activities at the Advanced Light Source for the year 2000. It includes highlights of scientific research by users of the facility as well as information about the development of the facility itself.

  11. Laser ion source for isobaric heavy ion collider experiment

    NASA Astrophysics Data System (ADS)

    Kanesue, T.; Kumaki, M.; Ikeda, S.; Okamura, M.

    2016-02-01

    Heavy-ion collider experiment in isobaric system is under investigation at Relativistic Heavy Ion Collider. For this experiment, ion source is required to maximize the abundance of the intended isotope. The candidate of the experiment is 96Ru + 96Zr. Since the natural abundance of particular isotope is low and composition of isotope from ion source depends on the composites of the target, an isotope enriched material may be needed as a target. We studied the performance of the laser ion source required for the experiment for Zr ions.

  12. Laser ion source for isobaric heavy ion collider experiment.

    PubMed

    Kanesue, T; Kumaki, M; Ikeda, S; Okamura, M

    2016-02-01

    Heavy-ion collider experiment in isobaric system is under investigation at Relativistic Heavy Ion Collider. For this experiment, ion source is required to maximize the abundance of the intended isotope. The candidate of the experiment is (96)Ru + (96)Zr. Since the natural abundance of particular isotope is low and composition of isotope from ion source depends on the composites of the target, an isotope enriched material may be needed as a target. We studied the performance of the laser ion source required for the experiment for Zr ions. PMID:26931981

  13. The Middeck Active Control Experiment (MACE)

    NASA Technical Reports Server (NTRS)

    Miller, David W.

    1992-01-01

    Viewgraphs on the Middeck Active Control Experiment (MACE) are presented. Topics covered include: program objectives; program features; flight experiment features; current activities; MACE development model lab testing; MACE test article deployed on STS middeck; and development model testing.

  14. The Middeck Active Control Experiment (MACE)

    NASA Astrophysics Data System (ADS)

    Miller, David W.

    Viewgraphs on the Middeck Active Control Experiment (MACE) are presented. Topics covered include: program objectives; program features; flight experiment features; current activities; MACE development model lab testing; MACE test article deployed on STS middeck; and development model testing.

  15. First experiments with the negative ion source NIO1

    NASA Astrophysics Data System (ADS)

    Cavenago, M.; Serianni, G.; De Muri, M.; Agostinetti, P.; Antoni, V.; Baltador, C.; Barbisan, M.; Baseggio, L.; Bigi, M.; Cervaro, V.; Degli Agostini, F.; Fagotti, E.; Kulevoy, T.; Ippolito, N.; Laterza, B.; Minarello, A.; Maniero, M.; Pasqualotto, R.; Petrenko, S.; Poggi, M.; Ravarotto, D.; Recchia, M.; Sartori, E.; Sattin, M.; Sonato, P.; Taccogna, F.; Variale, V.; Veltri, P.; Zaniol, B.; Zanotto, L.; Zucchetti, S.

    2016-02-01

    Neutral Beam Injectors (NBIs), which need to be strongly optimized in the perspective of DEMO reactor, request a thorough understanding of the negative ion source used and of the multi-beamlet optics. A relatively compact radio frequency (rf) ion source, named NIO1 (Negative Ion Optimization 1), with 9 beam apertures for a total H- current of 130 mA, 60 kV acceleration voltage, was installed at Consorzio RFX, including a high voltage deck and an X-ray shield, to provide a test bench for source optimizations for activities in support to the ITER NBI test facility. NIO1 status and plasma experiments both with air and with hydrogen as filling gas are described. Transition from a weak plasma to an inductively coupled plasma is clearly evident for the former gas and may be triggered by rising the rf power (over 0.5 kW) at low pressure (equal or below 2 Pa). Transition in hydrogen plasma requires more rf power (over 1.5 kW).

  16. First experiments with the negative ion source NIO1.

    PubMed

    Cavenago, M; Serianni, G; De Muri, M; Agostinetti, P; Antoni, V; Baltador, C; Barbisan, M; Baseggio, L; Bigi, M; Cervaro, V; Degli Agostini, F; Fagotti, E; Kulevoy, T; Ippolito, N; Laterza, B; Minarello, A; Maniero, M; Pasqualotto, R; Petrenko, S; Poggi, M; Ravarotto, D; Recchia, M; Sartori, E; Sattin, M; Sonato, P; Taccogna, F; Variale, V; Veltri, P; Zaniol, B; Zanotto, L; Zucchetti, S

    2016-02-01

    Neutral Beam Injectors (NBIs), which need to be strongly optimized in the perspective of DEMO reactor, request a thorough understanding of the negative ion source used and of the multi-beamlet optics. A relatively compact radio frequency (rf) ion source, named NIO1 (Negative Ion Optimization 1), with 9 beam apertures for a total H(-) current of 130 mA, 60 kV acceleration voltage, was installed at Consorzio RFX, including a high voltage deck and an X-ray shield, to provide a test bench for source optimizations for activities in support to the ITER NBI test facility. NIO1 status and plasma experiments both with air and with hydrogen as filling gas are described. Transition from a weak plasma to an inductively coupled plasma is clearly evident for the former gas and may be triggered by rising the rf power (over 0.5 kW) at low pressure (equal or below 2 Pa). Transition in hydrogen plasma requires more rf power (over 1.5 kW). PMID:26932048

  17. Surface Plasma Source Electrode Activation by Surface Impurities

    SciTech Connect

    Dudnikov, Vadim; Han, Baoxi; Johnson, Rolland P.; Murray Jr, S N; Pennisi, Terry R; Santana, Manuel; Stockli, Martin P; Welton, Robert F

    2011-01-01

    In experiments with RF saddle antenna surface plasma sources (SPS), the efficiency of H- ion generation was increased by up to a factor of 5 by long time plasma electrode activation, without adding Cs from Cs supply, by heating the collar to high temperature using hot air flow and plasma discharge. Without cracking or heating the cesium ampoule, but likely with Cs recovery from impurities, the achieved energy efficiency was comparable to that of conventionally cesiated SNS RF sources with an external or internal Cs supply. In the experiments, perfect cesiation was produced (without additional Cs supply) by the collection and trapping of traces of remnant cesium compounds from SPS surfaces.

  18. Investigation on RGB laser source applied to dynamic photoelastic experiment

    NASA Astrophysics Data System (ADS)

    Li, Songgang; Yang, Guobiao; Zeng, Weiming

    2014-06-01

    When the elastomer sustains the shock load or the blast load, its internal stress state of every point will change rapidly over time. Dynamic photoelasticity method is an experimental stress analysis method, which researches the dynamic stress and the stress wave propagation. Light source is one of very important device in dynamic photoelastic experiment system, and the RGB laser light source applied in dynamic photoelastic experiment system is innovative and evolutive to the system. RGB laser is synthesized by red laser, green laser and blue laser, either as a single wavelength laser light source, also as synthesized white laser light source. RGB laser as a light source for dynamic photoelastic experiment system, the colored isochromatic can be captured in dynamic photoelastic experiment, and even the black zero-level stripe can be collected, and the isoclinics can also be collected, which conducively analysis and study of transient stress and stress wave propagation. RGB laser is highly stable and continuous output, and its power can be adjusted. The three wavelengths laser can be synthesized by different power ratio. RGB laser light source used in dynamic photoelastic experiment has overcome a number of deficiencies and shortcomings of other light sources, and simplifies dynamic photoelastic experiment, which has achieved good results.

  19. Surface Plasma Source Electrode Activation by Surface Impurities

    SciTech Connect

    Dudnikov, Vadim; Johnson, Rolland P.; Han, B.; Murray, S. N.; Pennisi, T. R.; Santana, M.; Stockli, Martin P.; Welton, R. F.

    2011-09-26

    In experiments with RF saddle antenna surface plasma sources (SPS), the efficiency of H{sup -} ion generation was increased by up to a factor of 5 by plasma electrode 'activation', without supplying additional Cs, by heating the collar to high temperature for several hours using hot air flow and plasma discharge. Without cracking or heating the cesium ampoule, but likely with Cs recovery from impurities, the achieved energy efficiency was comparable to that of conventionally cesiated SNS RF sources with an external or internal Cs supply. In the experiments, optimum cesiation was produced (without additional Cs) by the collection and trapping of traces of remnant cesium compounds from SPS surfaces. Such activation by accumulation of impurities on electrode surfaces can be a reason for H{sup -} emission enhancement in other so-called 'volume' negative ion sources.

  20. Review of auditory subliminal psychodynamic activation experiments.

    PubMed

    Fudin, R; Benjamin, C

    1991-12-01

    Subliminal psychodynamic activation experiments using auditory stimuli have yielded only a modicum of support for the contention that such activation produces predictable behavioral changes. Problems in many auditory subliminal psychodynamic activation experiments indicate that those predictions have not been tested adequately. The auditory mode of presentation, however, has several methodological advantages over the visual one, the method used in the vast majority of subliminal psychodynamic activation experiments. Consequently, it should be considered in subsequent research in this area. PMID:1805167

  1. Preliminary results from the {sup 51}Cr neutrino source experiment in GALLEX

    SciTech Connect

    Hampel, W.; Heusser, G.; Kiko, J.

    1996-09-01

    The GALLEX collaboration performed a second {sup 51}Cr neutrino source experiment during fall 1995. The full results from this second source experiment will not be available before the end of 1996. Meanwhile, we present a short description and preliminary results in this informal note. The (preliminary) value of the activity obtained form direct measurements has been found equal to (68.7 {+-}0.7) PBq (with 1-sigma error). This value, which is about 10% higher than the activity of the first source, was achieved by optimizing the irradiation conditions in the Silo{acute e} reactor and doing a longer irradiation of the enriched chromium. Preliminary results show that the ratio, R, of the radiochemically determined activity from {sup 71}Ge counting (57.1 {+-} PBq) to the directly measured activity is (0.83 {+-} 0.10). The combined value of R for the two source experiments is (0.92 {+-} 0.08).

  2. Neutron calibration sources in the Daya Bay experiment

    DOE PAGESBeta

    Liu, J.; Carr, R.; Dwyer, D. A.; Gu, W. Q.; Li, G. S.; McKeown, R. D.; Qian, X.; Tsang, R. H. M.; Wu, F. F.; Zhang, C.

    2015-07-09

    We describe the design and construction of the low rate neutron calibration sources used in the Daya Bay Reactor Anti-neutrino Experiment. Such sources are free of correlated gamma-neutron emission, which is essential in minimizing induced background in the anti-neutrino detector. Thus, the design characteristics have been validated in the Daya Bay anti-neutrino detector.

  3. Recent negative ion source activity at JYFL

    NASA Astrophysics Data System (ADS)

    Kalvas, T.; Tarvainen, O.; Komppula, J.; Laitinen, M.; Sajavaara, T.; Koivisto, H.; Jokinen, A.; Dehnel, M. P.

    2013-02-01

    A filament-powered multicusp ion source for production of H- has been developed for the Jyväskylä Pelletron accelerator for use in ion beam lithography and particle induced X-ray emission applications. The source can be considered conventional with the exception of the filter field being created with an electric magnet for continuous adjustability. A permanent magnet dipoleantidipole electron dump is integrated in the puller electrode. The source provides 50 μA H- beam at 10 keV energy with 0.019 mm mrad 95 % normalized rms emittance through a 2 mm aperture. Lower emittance is achievable by changing the plasma electrode insert to a smaller aperture one if application requires. A new commercial MCC30/15 cyclotron has been installed at the Jyväskylä accelerator laboratory providing 30MeV H+ and 15Mev D+ for use in nuclear physics experiments and applications. The ion source delivered with the cyclotron is a a filament-powered multicusp source capable of about 130 h continuous operation at 1 mA H- output between filament changes. The ion source is located in the cyclotron vault and therefore a significant waiting time for the vault cooldown is required before filament change is possible. This kind of operation is not acceptable as 350 h and longer experiments are expected. Therefore a project for developing a CW 13.56 MHz RF ion source has been initiated. A planar RF antenna replacing the filament back plate of the existing TRIUMF-type ion source has been used in the first tests with 240 μA of H- and 21 mA of electrons measured at 1.5 kW of RF power. Tests with higher RF power levels were prevented by electron beam induced sparking. A new plasma chamber has been built and a new extraction is being designed for the RF ion source. The extraction code IBSimu has recently gone through a major update on how smooth electrode surfaces are implemented in the Poisson solvers. This has made it possible to implement a fast multigrid solver with low memory consumption. Also

  4. The Burst and Transient Source Experiment (BATSE) Earth Occultation Catalog

    NASA Technical Reports Server (NTRS)

    Wilson-Hodge, Colleen A.

    2004-01-01

    The hard X-ray sky was continuously monitored with the BATSE experiment on the Compton Gamma Ray observatory using the Earth Occultation method. Known sources were monitored twice every orbit and transients could be detected at about the approx. 50 mCrab level on a daily basis. I will summarize the results from our catalog of 179 monitored sources, highlighting observations of black holes and energy spectra for the 83 firmly detected sources and FITS files for all 179 sources. This web database can serve as a guide and comparison tool for future observations with EXIST.

  5. FAME: Freeform Active Mirrors Experiment

    NASA Astrophysics Data System (ADS)

    Hugot, Emmanuel; Agocs, Tibor; Challita, Zalpha; Jasko, Attila; Kroes, Gabby; Banyai, Evelin; Miller, Chris; Taylor, William; Schnetler, Hermine; Venema, Lars

    2014-07-01

    This paper discusses the development of a demonstrator freeform active mirror for future astronomical instruments both on Earth and in space. It consists of a system overview and progress in various areas of technology in the building blocks of the mirror: an extreme freeform thin face sheet, an active array, design tools and the metrology and control of the system. The demonstrator aims to investigate the applicability of the technique in high end astronomical systems, also for space and cryogenically.

  6. Environmental Pollution, Student's Book (Experiences/Experiments/Activities).

    ERIC Educational Resources Information Center

    Weaver, Elbert C.

    Described in this student's manual are numerous experiments to acquaint the learner with community environmental problems. Experiments are relatively simple and useful in the junior high school grades. Activities are provided which emphasize some of the materials involved in pollution problems, such as carbon dioxide, sulfur compounds, and others,…

  7. Environmental Pollution, Teacher's Manual (Experiences/Experiments/Activities).

    ERIC Educational Resources Information Center

    Weaver, Elbert C.

    Described in this teacher's guide are numerous experiments teachers may use to guide students in learning about community environmental problems. Experiments are relatively simple and useful in the junior high school grades. Activities allow the student to become acquainted with the methods for the detection and removal of undesirable materials…

  8. Experiment system of LAMOST active optics

    NASA Astrophysics Data System (ADS)

    Cui, Xiangqun; Su, Ding; Li, Guoping; Yao, Zhengqiu; Zhang, Zhengcao; Li, Yeping; Zhang, Yong; Wang, You; Xu, Xinqi; Wang, Hai

    2004-10-01

    Active optics is the most difficult part in LAMOST project. Especially for the segmented reflecting Schmidt plate Ma, in which both segmented mirror active optics and thin mirror (or deformable mirror) active optics are applied. To test and optimize the thin mirror active optics of Ma, and to approach the reality of operating environment of the telescope, an outdoor experiment system has been established. This experiment system is also a `small LAMOST" with one sub-mirror of the primary mirror Mb and one sub-mirror of the Schmidt plate Ma, and with full scale in spacing (40 meters) between Ma and Mb. many parts of LAMOST were tested in the experiment system except segmented mirror active optics. Especially for force actuators, thin mirror support system, friction driving of the alt-azimuth mounting and its control system, wave front test along such a long optical path. This paper presents the experiment system, research and developments, and some experiment results.

  9. NATIONAL SYNCHROTRON LIGHT SOURCE ACTIVITY REPORT 1998.

    SciTech Connect

    ROTHMAN,E.

    1999-05-01

    In FY 1998, following the 50th Anniversary Year of Brookhaven National Laboratory, Brookhaven Science Associates became the new Managers of BNL. The new start is an appropriate time to take stock of past achievements and to renew or confirm future goals. During the 1998 NSLS Annual Users Meeting (described in Part 3 of this Activity Report), the DOE Laboratory Operations Board, Chaired by the Under Secretary for Energy, Ernest Moniz met at BNL. By chance all the NSLS Chairmen except Martin Blume (acting NSLS Chair 84-85) were present as recorded in the picture. Under their leadership the NSLS has improved dramatically: (1) The VUV Ring current has increased from 100 mA in October 1982 to nearly 1 A today. For the following few years 10 Ahrs of current were delivered most weeks - NSLS now exceeds that every day. (2) When the first experiments were performed on the X-ray ring during FY1985 the electron energy was 2 GeV and the current up to 100 mA - the X-Ray Ring now runs routinely at 2.5 GeV and at 2.8 GeV with up to 350 mA of current, with a very much longer beam half-life and improved reliability. (3) Starting in FY 1984 the proposal for the Phase II upgrade, mainly for a building extension and a suite of insertion devices and their associated beamlines, was pursued - the promises were delivered in full so that for some years now the NSLS has been running with two undulators in the VUV Ring and three wigglers and an undulator in the X-Ray Ring. In addition two novel insertion devices have been commissioned in the X13 straight. (4) At the start of FY 1998 the NSLS welcomed its 7000th user - attracted by the opportunity for pursuing research with high quality beams, guaranteed not to be interrupted by 'delivery failures', and welcomed by an efficient and caring user office and first class teams of PRT and NSLS staff. R & D have lead to the possibility of running the X-Ray Ring at the higher energy of 2.8 GeV. Figure 1 shows the first user beam, which was provided

  10. Lunar seismic profiling experiment natural activity study

    NASA Technical Reports Server (NTRS)

    Duennebier, F. K.

    1976-01-01

    The Lunar Seismic Experiment Natural Activity Study has provided a unique opportunity to study the high frequency (4-20 Hz) portion to the seismic spectrum on the moon. The data obtained from the LSPE was studied to evaluate the origin and importance of the process that generates thermal moonquakes and the characteristics of the seismic scattering zone at the lunar surface. The detection of thermal moonquakes by the LSPE array made it possible to locate the sources of many events and determine that they are definitely not generated by astronaut activities but are the result of a natural process on the moon. The propagation of seismic waves in the near-surface layers was studied in a qualitative manner. In the absence of an adequate theoretical model for the propagation of seismic waves in the moon, it is not possible to assign a depth for the scattering layer. The LSPE data does define several parameters which must be satisfied by any model developed in the future.

  11. Development of an active structure flight experiment

    NASA Astrophysics Data System (ADS)

    Manning, R. A.; Wyse, R. E.; Schubert, S. R.

    1993-02-01

    The design and development of the Air Force and TRW's Advanced Control Technology Experiment (ACTEX) flight experiment is described in this paper. The overall objective of ACTEX is to provide an active structure trailblazer which will demonstrate the compatibility of active structures with operational spacecraft performance and lifetime measures. At the heart of the experiment is an active tripod driven by a digitally-programmable analog control electronics subsystem. Piezoceramic sensors and actuators embedded in a graphite epoxy host material provide the sensing and actuation mechanism for the active tripod. Low noise ground-programmable electronics provide a virtually unlimited number of control schemes that can be implemented in the space environment. The flight experiment program provides the opportunity to gather performance, reliability, adaptability, and lifetime performance data on vibration suppression hardware for the next generation of DoD and NASA spacecraft.

  12. The Middeck Active Control Experiment (MACE)

    NASA Astrophysics Data System (ADS)

    Miller, David W.

    1991-07-01

    Viewgraphs on the Middeck Active Control Experiment (MACE) are presented. Topics covered include: science program objectives and rationale; science requirements; capturing the essential physics; science development approach; development model hardware; development model test plan; and flight hardware and operations.

  13. The Middeck Active Control Experiment (MACE)

    NASA Technical Reports Server (NTRS)

    Miller, David W.

    1991-01-01

    Viewgraphs on the Middeck Active Control Experiment (MACE) are presented. Topics covered include: science program objectives and rationale; science requirements; capturing the essential physics; science development approach; development model hardware; development model test plan; and flight hardware and operations.

  14. Experience of disused source management in Latin America

    SciTech Connect

    Pimenta Mourao, R.

    2008-07-01

    The Centro de Desenvolvimento da Tecnologia Nuclear (Center for the Development of Nuclear Technology) - CDTN - has been actively engaged in cooperation programs for disused source management throughout the Latin American and the Caribbean region since 1996. The CDTN source conditioning team participated in the preparation of the technical procedures established for the different tasks involved in the radium sources conditioning operations, like preparation of the packaging for conditioning; sources conditioning; capsule welding; leak test in radium-containing capsule; and radiation protection planning for the conditioning of disused radium sources. The team also carried out twelve radium sources conditioning operation in the region, besides in-house operations, which resulted in a total conditioned activity of approximately 525 GBq, or 14,200 mg of radium. Additionally, one operation was carried out in Nicaragua to safely condition three Cobalt teletherapy heads stored under very precarious conditions in the premises of an old hospital. More recently, the team started its participation in an IAEA- and US State Department-sponsored program for the repatriation of disused or excess transuranic sources presently stored at users' premises or under regulatory control in different countries in the region. In September 2007 the team attended a theoretical and practical training in transuranic sources management, including the participation in the conditioning of different neutron sources in certified packages. It is expected that the trained team will carry out similar operations in other Latin American countries. Finally, the team is expected be involved in the near future in the repatriation of US-origin teletherapy heads and industrial gauges. (authors)

  15. NATIONAL SYNCHROTRON LIGHT SOURCE ACTIVITY REPORT 2004

    SciTech Connect

    MILLER,L.

    2005-05-01

    for the environmental science community, is also very important, as it will help to satisfy the large over subscription rate for this technique at the NSLS. Two other important upgrades that were initiated this past year are the replacement of the X25 wiggler with an undulator and the construction of the X9 undulator beamline for small-angle scattering, with an emphasis on nanoscience research. Another key activity that will benefit all users was the restoration of the x-ray ring lattice symmetry, which reduced the horizontal emittance and made the operational lattice more robust. Similarly, all users will benefit from the introduction of the PASS (Proposal Allocation Safety Scheduling) system this past year, which has greatly improved the process of proposal submission, review, allocation, and scheduling. This coming year we will work to add Rapid Access to the capabilities of PASS. Overall, the success of these and the many other projects that space does not permit listing is a testament to the dedication, hard work, and skill of the NSLS staff. Safety has always been an important issue at a large, complex scientific facility like the NSLS and in 2004 it received renewed attention. Safety is our highest priority and we spent a great deal of time reviewing and refining our safety practices and procedures. A new 'Safety Highlights' web page was created for safety news, and a large number of safety meetings and discussions were held. These reviews and meetings generated many ideas on how the NSLS might improve its safety practices, and we are committed to putting these in place and improving our already very good safety program. We had no lost-time accidents in 2004, which is a notable accomplishment. Our goal is to be best in class and I'm confident that by working together we can achieve that status. Several activities took place this past year to advance our proposal to replace the NSLS with a new National Synchrotron Light Source-II facility. These included a major

  16. Metabolic Activity - Skylab Experiment M171

    NASA Technical Reports Server (NTRS)

    1972-01-01

    This chart details Skylab's Metabolic Activity experiment (M171), a medical evaluation facility designed to measure astronauts' metabolic changes while on long-term space missions. The experiment obtained information on astronauts' physiological capabilities and limitations and provided data useful in the design of future spacecraft and work programs. Physiological responses to physical activity was deduced by analyzing inhaled and exhaled air, pulse rate, blood pressure, and other selected variables of the crew while they performed controlled amounts of physical work with a bicycle ergometer. The Marshall Space Flight Center had program responsibility for the development of Skylab hardware and experiments.

  17. Enzyme Activity Experiments Using a Simple Spectrophotometer

    ERIC Educational Resources Information Center

    Hurlbut, Jeffrey A.; And Others

    1977-01-01

    Experimental procedures for studying enzyme activity using a Spectronic 20 spectrophotometer are described. The experiments demonstrate the effect of pH, temperature, and inhibitors on enzyme activity and allow the determination of Km, Vmax, and Kcat. These procedures are designed for teaching large lower-level biochemistry classes. (MR)

  18. An experiment on the color rendering of different light sources

    NASA Astrophysics Data System (ADS)

    Fumagalli, Simonetta; Bonanomi, Cristian; Rizzi, Alessandro

    2013-02-01

    The color rendering index (CRI) of a light source attempts to measure how much the color appearance of objects is preserved when they are illuminated by the given light source. This problem is of great importance for various industrial and scientific fields, such as lighting architecture, design, ergonomics, etc. Usually a light source is specified through the Correlated Color Temperature or CCT. However two (or more) light sources with the same CCT but different spectral power distribution can exist. Therefore color samples viewed under two light sources with equal CCTs can appear different. Hence, the need for a method to assess the quality of a given illuminant in relation to color. Recently CRI has had a renewed interest because of the new LED-based lighting systems. They usually have a color rendering index rather low, but good preservation of color appearance and a pleasant visual appearance (visual appeal). Various attempts to develop a new color rendering index have been done so far, but still research is working for a better one. This article describes an experiment performed by human observers concerning the appearance preservation of color under some light sources, comparing it with a range of available color rendering indices.

  19. Target Operational Experience at the Spallation Neutron Source

    SciTech Connect

    Riemer, Bernie; Janney, Jim G; Kaminskas, Saulius; McClintock, David A; Rosenblad, Peter M

    2013-01-01

    The Spallation Neutron Source (SNS) at the Oak Ridge National Laboratory (ORNL) has operated at unprecedented power levels for a short-pulse spallation source. Target operations have been successful but not without difficulties. Three targets out of the eight used to date have ended life unexpectedly causing interruptions to the neutron science users. The first of a kind mercury target design experiences beam-pulse induced cavitation damage that is suspected in one of the target leaks. The two other targets suffered early failures due to defective welds. Diagnosing the causes of target leaks and understanding of the progression of cavitation erosion and radiation damage effects has made use of post-irradiation examination (PIE) capabilities. As a result of PIE, review of quality assurance practices and related investigations, design changes are being implemented and manufacturing oversight improved. This paper describes SNS target operating experience, including the more important observations and lessons learned.

  20. Explosive Vessel for Dynamic Experiments at Advanced Light Sources

    NASA Astrophysics Data System (ADS)

    Owens, Charles; Sorensen, Christian; Armstrong, Christopher; Sanchez, Nathaniel; Jensen, Brian

    2015-06-01

    There has been significant effort in coupling dynamic loading platforms to advanced light sources such as the Advanced Photon Source (APS) to take advantage of X-ray diagnostics for examining material physics at extremes. Although the focus of these efforts has been on using gun systems for dynamic compression experiments, there are many experiments that require explosive loading capabilities including studies related to detonator dynamics, small angle X-ray scattering on explosives, and ejecta formation, for example. To this end, an explosive vessel and positioning stage was designed specifically for use at a synchrotron with requirements to confine up to 15 grams of explosives, couple the vessel to the X-ray beam line, and reliably position samples in the X-ray beam remotely with micrometer spatial accuracy. In this work, a description of the system will be provided along with explosive testing results for the robust, reusable positioning system.

  1. Angular response calibration of the burst and transient source experiment

    NASA Technical Reports Server (NTRS)

    Lestrade, John Patrick

    1988-01-01

    The Gamma Ray Observatory includes four experiments designed to observe the gamma-ray universe. Laboratory measurements to test the response the Burst and Transient Source Experiment (BATSE) modules to gamma-ray sources that are non-axial were recently completed. The results of these observations are necessary for the correct interpretation of BATSE data obtained after it is put in Earth orbit. The launch is planned for March, 1900. Preliminary analyses of these test data show the presence of a radial dependence to the detector's light collection efficiency. It is proposed to evaluate the importance of this radial response, analyze future experimental data to derive the actual functional dependence on radius, and calculate the net effect on the output spectrum as a function of the angle of incidence.

  2. Advanced light source. Activity report 1995

    SciTech Connect

    1996-07-01

    The ALS Activity Report is designed to share the breadth, variety, and interest of the scientific program and ongoing R&D efforts in a form that is accessible to a broad audience. Recent research results are presented in six sections, each representing an important theme in ALS science. These results are designed to demonstrate the capabilities of the ALS, rather than to give a comprehensive review of 1995 experiments. Although the scientific program and facilities report are separate sections, in practice the achievements and accomplishments of users and ALS staff are interdependent. This user-staff collaboration is essential to help us direct our efforts toward meeting the needs of the user community, and to ensure the continued success of the ALS as a premier facility.

  3. Management of Spent and Disused Radiation Sources - The Zambian Experience

    SciTech Connect

    Chabala, F.

    2002-02-26

    Zambia like all other countries in the world is faced with environmental problems brought about by a variety of human activities. In Zambia the major environmental issues as identified by Nation Environmental Action Plan (NEAP) of 1994 are water pollution, poor sanitation, land degradation, air pollution, poor waste management, misuse of chemicals, wildlife depletion and deforestation. Zambian has been using a lot of radioactive materials in its various industries. The country has taken several projects with help of external partners. These partners however left these projects in the hands of the Zambians without developing their capacities to manage these radioactive sources. The Government recognized the need to manage these sources and passed legislation governing the management of radioactive materials. The first act of Parliament on Radiation Protection work was passed in 1975 to legislate the use of ionizing radiation. However, because of financial constraints the Country is facing, these regulations have remained unimplemented. Fortunately the international Community has been working in partnership with the Zambian Government in the Management of Radioactive Material. Therefore this paper will present the following aspects of radioactive waste management in Zambia: review Existing Legislation in Zambia regarding management of spent/radioactive sources; capacity building in the field of management of radioactive waste; management of spent and disused radiation sources; existing disposal systems in Zambia regarding spent/orphaned sources; existing stocks of radioactive sources in the Zambian industries.

  4. The Burst and Transient Source Experiment Earth Occultation Technique

    NASA Technical Reports Server (NTRS)

    Harmon, B. A.; Fishman, G. J.; Wilson, C. A.; Paciesas, W. S.; Zhang, S. N.; Finger, M. H.; Koshut, T. M.; McCollough, M. L.; Robinson, C. R.; Rubin, B. C.

    2002-01-01

    An Earth orbiting detector sensitive to gamma-ray photons will see step-like occultation features in its count rate when a gamma-ray point source crosses the Earth's limb. This is due to the change in atmospheric attenuation of the gamma rays along the line of sight. In an uncollimated detector, these occultation features can be used to locate and monitor astrophysical sources provided their signals can be individually separated from the detector background. We show that the Earth occultation technique applied to the Burst and Transient Source Experiment (BATSE) on the Compton Gamma Ray Observatory (CGRO) is a viable and flexible all-sky monitor in the low-energy gamma-ray and hard X-ray energy range (20 keV-1 MeV). The method is an alternative to more sophisticated photon imaging devices for astronomy and can serve well as a cost-effective science capability for monitoring the high energy sky. Here we describe the Earth occultation technique for locating new sources and for measuring source intensity and spectra without the use of complex background models. Examples of transform imaging, step searches, spectra, and light curves are presented. Systematic uncertainties due to source confusion, detector response, and contamination from rapid background fluctuations are discussed and analyzed for their effect on intensity measurements. A sky location-dependent average systematic error is derived as a function of Galactic coordinates. The sensitivity of the technique is derived as a function of incident photon energy and also as a function of angle between the source and the normal to the detector entrance window. Occultations of the Crab Nebula by the Moon are used to calibrate Earth occultation flux measurements independent of possible atmospheric scattering effects.

  5. The Burst and Transient Source Experiment (BATSE) Earth Occultation Catalog of Low-Energy Gamma-Ray Sources

    NASA Technical Reports Server (NTRS)

    Harmon, B. A.; Wilson, C. A.; Fishman, G. J.; Connaughton, V.; Henze, W.; Paciesas, W. S.; Finger, M. H.; McCollough, M. L.; Sahi, M.; Peterson, B.

    2004-01-01

    The Burst and Transient Source Experiment (BATSE), aboard the Compton Gamma Ray Observatory (CGRO), provided a record of the low-energy gamma-ray sky (approx. 20-1000 keV) between 1991 April and 2000 May (9.1 yr). BATSE monitored the high-energy sky using the Earth occultation technique (EOT) for point sources whose emission extended for times on the order of the CGRO orbital period (approx. 92 min) or greater. Using the EOT to extract flux information, a catalog of sources using data from the BATSE Large Area Detectors has been prepared. The first part of the catalog consists of results from the all-sky monitoring of 58 sources, mostly Galactic, with intrinsic variability on timescales of hours to years. For these sources, we have included tables of flux and spectral data, and outburst times for transients. Light curves (or flux histories) have been placed on the World Wide Web. We then performed a deep sampling of these 58 objects, plus a selection of 121 more objects, combining data from the entire 9.1 yr BATSE data set. Source types considered were primarily accreting binaries, but a small number of representative active galaxies, X-ray-emitting stars, and supernova remnants were also included. The sample represents a compilation of sources monitored and/or discovered with BATSE and other high-energy instruments between 1991 and 2000, known sources taken from the HEAO 1 A-4 and Macomb & Gehrels catalogs. The deep sample results include definite detections of 83 objects and possible detections of 36 additional objects. The definite detections spanned three classes of sources: accreting black hole and neutron star binaries, active galaxies, and Supernova remnants. The average fluxes measured for the fourth class, the X-ray emitting stars, were below the confidence limit for definite detection.

  6. The Los Alamos National Laboratory source geometry experiment

    SciTech Connect

    Stump, B.W.; Pearson, D.C.; Edwards, C.L.; Baker, D.F.

    1995-09-01

    The Source Geometry Experiment was successfully conducted over the time period 17 April to 7 May 95. Recording in the mine was conducted 24 April to 4 May 95. Five single sources were instrumented that included four cylindrical charges at different burdens (distance from the free face) and a pseudo-spherical charge. Nine production shots conducted during the two week visit to the mine were also recorded. Included in these production shots were a number of explosions designed to primarily bulk (no cast) the overburden and a number which cast material into the mine pit. Instrumentation was divided into six primary types: (1) Near-source accelerometers were deployed at distances of approximately 20 to 300 m [14, three-component 25 g/volt accelerometers and 16, three-component 1 g/volt accelerometers]; (2) Linear array of velocity gauges to quantify wave propagation effects [4-11 three component strong motion velocity gauges]; (3)Far-field velocity gages deployed in an azimuthal array around the mine at ranges from 500 to 2500 m [8, three component velocity gauges]; (4) High speed film and multiple camera video designed to quantify the two and three dimensional affects around the explosions [2 high speed cameras and 3 Hi-8 video cameras]; (5) Velocity of detonation and detonation time measurements of selected explosions [2 VODR systems]; and (6) Pre and post shot laser survey. Any one shot had as many as 154 channels of data. Although the complete data set is still being assembled, quality checked and analyzed, it appears that nearly 2,000 channels of data were successfully recovered during the experiment. Preliminary analysis of the data illustrates the: (1) Significant spall accompanied both the cylindrical and spherical single sources; (2) Similarity of waveforms from the cylindrical and spherical single sources; (3) Strong variations in the body and surface wave generation from the nine production shot.

  7. A portable active interrogation system using a switchable AmBe neutron source

    NASA Astrophysics Data System (ADS)

    Allen, Matthew; Hertz, Kristin; Kunz, Christopher; Mascarenhas, Nicholas

    2005-09-01

    Active neutron interrogation is an effective technique used to locate fissionable material. This paper discusses a portable system that utilizes a AmBe neutron source. The AmBe source consists of an americium alpha source and a beryllium target that can be switched into alignment to turn the source on and out of alignment to turn the source off. This offers a battery operated backpack portable source. The detector system that has been fabricated for use with this source is a fifteen tube 3He neutron detector. The results of initial experiments with the detector and MCNP calculations are discussed.

  8. Meter scale plasma source for plasma wakefield experiments

    NASA Astrophysics Data System (ADS)

    Vafaei-Najafabadi, N.; Shaw, J. L.; Marsh, K. A.; Joshi, C.; Hogan, M. J.

    2012-12-01

    High accelerating gradients generated by a high density electron beam moving through plasma has been used to double the energy of the SLAC electron beam [1]. During that experiment, the electron current density was high enough to generate its own plasma without significant head erosion. In the newly commissioned FACET facility at SLAC, the peak current will be lower and without pre-ionization, head erosion will be a significant challenge for the planned experiments. In this work we report on our design of a meter scale plasma source for these experiments to effectively avoid the problem of head erosion. The plasma source is based on a homogeneous metal vapor gas column that is generated in a heat pipe oven [2]. A lithium oven over 30 cm long at densities over 1017 cm-3 has been constructed and tested at UCLA. The plasma is then generated by coupling a 10 TW short pulse Ti:Sapphire laser into the gas column using an axicon lens setup. The Bessel profile of the axicon setup creates a region of high intensity that can stretch over the full length of the gas column with approximately constant diameter. In this region of high intensity, the alkali metal vapor is ionized through multi-photon ionization process. In this manner, a fully ionized meter scale plasma of uniform density can be formed. Methods for controlling the plasma diameter and length will also be discussed.

  9. Meter scale plasma source for plasma wakefield experiments

    SciTech Connect

    Vafaei-Najafabadi, N.; Shaw, J. L.; Marsh, K. A.; Joshi, C.; Hogan, M. J.

    2012-12-21

    High accelerating gradients generated by a high density electron beam moving through plasma has been used to double the energy of the SLAC electron beam [1]. During that experiment, the electron current density was high enough to generate its own plasma without significant head erosion. In the newly commissioned FACET facility at SLAC, the peak current will be lower and without pre-ionization, head erosion will be a significant challenge for the planned experiments. In this work we report on our design of a meter scale plasma source for these experiments to effectively avoid the problem of head erosion. The plasma source is based on a homogeneous metal vapor gas column that is generated in a heat pipe oven [2]. A lithium oven over 30 cm long at densities over 10{sup 17} cm{sup -3} has been constructed and tested at UCLA. The plasma is then generated by coupling a 10 TW short pulse Ti:Sapphire laser into the gas column using an axicon lens setup. The Bessel profile of the axicon setup creates a region of high intensity that can stretch over the full length of the gas column with approximately constant diameter. In this region of high intensity, the alkali metal vapor is ionized through multi-photon ionization process. In this manner, a fully ionized meter scale plasma of uniform density can be formed. Methods for controlling the plasma diameter and length will also be discussed.

  10. First experiments with gasdynamic ion source in CW mode.

    PubMed

    Skalyga, V; Izotov, I; Golubev, S; Vodopyanov, A; Tarvainen, O

    2016-02-01

    A new type of ECR ion source-a gasdynamic ECR ion source-has been recently developed at the Institute of Applied Physics. The main advantages of such device are extremely high ion beam current with a current density up to 600-700 emA/cm(2) in combination with low emittance, i.e., normalized RMS emittance below 0.1 π mm mrad. Previous investigations were carried out in pulsed operation with 37.5 or 75 GHz gyrotron radiation with power up to 100 kW at SMIS 37 experimental facility. The present work demonstrates the first experience of operating the gasdynamic ECR ion source in CW mode. A test bench of SMIS 24 facility has been developed at IAP RAS. 24 GHz radiation of CW gyrotron was used for plasma heating in a magnetic trap with simple mirror configuration. Initial studies of plasma parameters were performed. Ion beams with pulsed and CW high voltage were successfully extracted from the CW discharge. Obtained experimental results demonstrate that all advantages of the gasdynamic source can be realized also in CW operation. PMID:26931933

  11. An angular-selective electron source for the KATRIN experiment

    NASA Astrophysics Data System (ADS)

    Beck, M.; Bokeloh, K.; Hein, H.; Bauer, S.; Baumeister, H.; Bonn, J.; Ortjohann, H.-W.; Ostrick, B.; Rosendahl, S.; Streubel, S.; Valerius, K.; Zbořil, M.; Weinheimer, C.

    2014-11-01

    The KATRIN experiment is going to search for the average mass of the electron antineutrino with a sensitivity of 0.2 eV/c2. It uses a retardation spectrometer of MAC-E filter type to accurately measure the shape of the electron spectrum at the endpoint of tritium beta decay. In order to achieve the planned sensitivity the transmission properties of the spectrometer have to be understood with high precision for all initial conditions. For this purpose an electron source has been developed that emits single electrons at adjustable total energy and adjustable emission angle. The emission is pointlike and can be moved across the full flux tube that is imaged onto the detector. Here, we demonstrate that this novel type of electron source can be used to investigate the transmission properties of a MAC-E filter in detail.

  12. Interpretation of the TRADE In-Pile source multiplication experiments

    NASA Astrophysics Data System (ADS)

    Mercatali, Luigi; Carta, Mario; Peluso, Vincenzo

    2006-06-01

    Within the framework of the neutronic characterization of the TRIGA RC-1 reactor in support to the TRADE (TRiga Accelerator Driven Experiment) program, the interpretation of the subcriticality level measurements performed in static regime during the TRADE In-Pile experimental program is presented. Different levels of subcriticality have been measured using the MSA (Modified Source Approximated) method by the insertion of a standard fixed radioactive source into different core positions. Starting from a reference configuration, fuel elements were removed: control rods were moved outward as required for the coupling experiments envisioned with the proton accelerator and fission chambers were inserted in order to measure subcritical count rates. A neutron-physics analysis based on the modified formulation of the source multiplication method (MSM) has been carried out, which requires the systematic solution for each experimental configuration of the homogeneous, both in the forward and adjoint forms, and inhomogeneous Boltzmann equations. By means of such a methodology calculated correction factors to be applied to the MSA measured reactivities were produced in order to take into account spatial and energetic effects creating changes in the detector efficiencies and effective source with respect to the calibration configuration. The methodology presented has been tested against a large number of experimental states. The measurements have underlined the sensitivity of the MSA measured reactivities to core geometry changes and control rod perturbations; the efficiency of MSM factors to dramatically correct for this sensitivity is underlined, making of this technique a relevant methodology in view of the incoming US RACE program to be performed in TRIGA reactors.

  13. Soil Moisture Active Passive Validation Experiment 2008

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Soil Moisture Active Passive Validation Experiment 2008 (SMAPVEX08) was conducted to address specific issues identified by the SMAP satellite mission (launch 2013). SMAP is currently addressing issues related to the development and selection of retrieval algorithms as well as refining the mission de...

  14. Development of the Burst and Transient Source Experiment (BATSE)

    NASA Technical Reports Server (NTRS)

    Horack, J. M.

    1991-01-01

    The Burst and Transient Source Experiment (BATSE), one of four instruments on the Gamma Ray Observatory, consists of eight identical detector modules mounted on the corners of the spacecraft. Developed at MSFC, BATSE is the most sensitive gamma ray burst detector flown to date. Details of the assembly and test phase of the flight hardware development are presented. Results and descriptions of calibrations performed at MSFC, TRW, and KSC are documented extensively. With the presentation of each calibration results, the reader is provided with the means to access raw calibration data for further review or analysis.

  15. Postanalysis of the CNPS (Compact Nuclear Power Source) critical experiment

    NASA Astrophysics Data System (ADS)

    Palmer, R. G.

    The Compact Nuclear Power Source (CNPS) was designed to produce electric power for remote sites where fuel logistics and costs would justify a remotely sited nuclear power plant. Since the reactor was of novel design with no appropriate benchmarks, a series of critical experiments was carried out at LANL. This paper describes the methodology and reports the results of the postanalysis that was performed on the critical experiments, which included several distinct critical configurations, the measurement of the isothermal temperature coefficient of reactivity and various material worths. Comparisons with measurements indicate that current methods and cross sections are adequate for calculating at least the beginning of life conditions in low enriched U-235-graphite cores.

  16. Postanalysis of the CNPS (Compact Nuclear Power Source) critical experiment

    SciTech Connect

    Palmer, R.G.

    1988-01-01

    The Compact Nuclear Power Source (CNPS) was designed to produce electric power for remote sites where fuel logistics and costs would justify a remotely sited nuclear power plant. Since the reactor was of novel design with no appropriate benchmarks, a series of critical experiments was carried out at LANL. This paper describes the methodology and reports the results of the postanalysis that was performed on the critical experiments, which included several distinct critical configurations, the measurement of the isothermal temperature coefficient of reactivity and various material worths. Comparisons with measurements indicate that current methods and cross sections are adequate for calculating at least the beginning of life conditions in low enriched /sup 235/U-graphite cores. 7 refs., 4 figs., 4 tabs.

  17. Open-source products for a lighting experiment device.

    PubMed

    Gildea, Kevin M; Milburn, Nelda

    2014-12-01

    The capabilities of open-source software and microcontrollers were used to construct a device for controlled lighting experiments. The device was designed to ascertain whether individuals with certain color vision deficiencies were able to discriminate between the red and white lights in fielded systems on the basis of luminous intensity. The device provided the ability to control the timing and duration of light-emitting diode (LED) and incandescent light stimulus presentations, to present the experimental sequence and verbal instructions automatically, to adjust LED and incandescent luminous intensity, and to display LED and incandescent lights with various spectral emissions. The lighting device could easily be adapted for experiments involving flashing or timed presentations of colored lights, or the components could be expanded to study areas such as threshold light perception and visual alerting systems. PMID:24281687

  18. A numerical experiment on light pollution from distant sources

    NASA Astrophysics Data System (ADS)

    Kocifaj, M.

    2011-08-01

    To predict the light pollution of the night-time sky realistically over any location or measuring point on the ground presents quite a difficult calculation task. Light pollution of the local atmosphere is caused by stray light, light loss or reflection of artificially illuminated ground objects or surfaces such as streets, advertisement boards or building interiors. Thus it depends on the size, shape, spatial distribution, radiative pattern and spectral characteristics of many neighbouring light sources. The actual state of the atmospheric environment and the orography of the surrounding terrain are also relevant. All of these factors together influence the spectral sky radiance/luminance in a complex manner. Knowledge of the directional behaviour of light pollution is especially important for the correct interpretation of astronomical observations. From a mathematical point of view, the light noise or veil luminance of a specific sky element is given by a superposition of scattered light beams. Theoretical models that simulate light pollution typically take into account all ground-based light sources, thus imposing great requirements on CPU and MEM. As shown in this paper, a contribution of distant sources to the light pollution might be essential under specific conditions of low turbidity and/or Garstang-like radiative patterns. To evaluate the convergence of the theoretical model, numerical experiments are made for different light sources, spectral bands and atmospheric conditions. It is shown that in the worst case the integration limit is approximately 100 km, but it can be significantly shortened for light sources with cosine-like radiative patterns.

  19. National Synchrotron Light Source 2008 Activity Report

    SciTech Connect

    Nasta,K.

    2009-05-01

    Funded by the U.S. Department of Energy's Office of Basic Energy Sciences, the National Synchrotron Light Source (NSLS) is a national user facility that operates two electron storage rings: X-Ray (2.8 GeV, 300 mA) and Vacuum Ultraviolet (VUV) (800 mev, 1.0A). These two rings provide intense light spanning the electromagnetic spectrum -- from very long infrared rays to ultraviolet light and super-short x-rays -- to analyze very small or highly dilute samples. The properties of this light, and the specially designed experimental stations, called beamlines, allow scientists in many diverse disciplines of research to perform experiments not possible at their own laboratories. Each year, about 2,200 scientists from more than 400 universities and companies use the NSLS for research in such diverse fields as biology, physics, chemistry, geology, medicine, and environmental and materials sciences. For example, researchers have used the NSLS to examine the minute details of computer chips, decipher the structures of viruses, probe the density of bone, determine the chemical composition of moon rocks, and reveal countless other mysteries of science. The facility has 65 operating beamlines, with 51 beamlines on the X-Ray Ring and 14 beamlines on the VUV-Infrared Ring. It runs seven days a week, 24 hours a day throughout the year, except during periods of maintenance and studies. Researchers are not charged for beam time, provided that the research results are published in open literature. Proprietary research is conducted on a full-cost-recovery basis. With close to 1,000 publications per year, the NSLS is one of the most prolific scientific facilities in the world. Among the many accolades given to its users and staff, the NSLS has won nine R&D 100 Awards for innovations ranging from a closed orbit feedback system to the first device able to focus a large spread of high-energy x-rays. In addition, a visiting NSLS researcher shared the 2003 Nobel Prize in Chemistry for work

  20. Radial response of the burst and transient source experiment

    NASA Technical Reports Server (NTRS)

    Lestrade, John Patrick

    1989-01-01

    The Gamma Ray Observatory (GRO) includes four experiments designed for observe the gamma-ray universe, one of which is the Burst And Transient Source Experiment (BATSE). During the first summer with the BATSE team in 1988, laboratory measurements were completed which test the response of the BATSE modules to gamma-ray sources that are non-axial. The results of these observations are necessary for the correct interpretation of BATSE data obtained after it is put in earth orbit. Subsequent analysis of the data revealed a shift in the centroids of the full-energy photopeaks for angles of incidence between about 70 and 110 degrees. This effect was diagnosed as being due to a radial dependence of the light collecting efficiency of the large-area detector (LAD). Energy-depositing events that occur near the perimeter of the 10-inch radius NaI disc are not as efficiently collected as those events that occur near the disc's center. This radial response is analyzed and in so doing the non-Gaussian shape of the photopeaks seen in the spectra taken at all angles is explained.

  1. LDEF active optical system components experiment

    NASA Technical Reports Server (NTRS)

    Blue, M. D.

    1991-01-01

    A preliminary report on the Active Optical System Components Experiment is presented. This experiment contained 136 components in a six-inch deep tray including lasers, infrared detectors and arrays, ultraviolet light detectors, light-emitting diodes, a light modulator, flash lamps, optical filters, glasses, and samples of surface finishes. The experimental results for those component characteristics appear as much related to the passage of time as to the effects of the space environment, but organic materials and extreme-infrared reflectivity of black paints show unexpected changes.

  2. LDEF active optical system components experiment

    NASA Technical Reports Server (NTRS)

    Blue, M. D.

    1992-01-01

    A preliminary report on the Active Optical System Components Experiment is presented. This experiment contained 136 components in a six inch deep tray including lasers, infrared detectors and arrays, ultraviolet light detectors, light-emitting diodes, a light modulator, flash lamps, optical filters, glasses, and samples of surface finishes. Thermal, mechanical, and structural considerations leading to the design of the tray hardware are discussed. In general, changes in the retested component characteristics appear as much related to the passage of time as to the effects of the space environment, but organic materials, multilayer optical interference filters, and extreme-infrared reflectivity of black paints show unexpected changes.

  3. Advanced Light Source Activity Report 2002

    SciTech Connect

    Duque, Theresa; Greiner, Annette; Moxon, Elizabeth; Robinson, Arthur; Tamura, Lori

    2003-06-12

    This annual report of the Advanced Light Source details science highlights and facility improvements during the year. It also offers information on events sponsored by the facility, technical specifications, and staff and publication information.

  4. Electron beam injection during active experiments. I - Electromagnetic wave emissions

    NASA Technical Reports Server (NTRS)

    Winglee, R. M.; Kellogg, P. J.

    1990-01-01

    The wave emissions produced in Echo 7 experiment by active injections of electron beams were investigated to determine the properties of the electromagnetic and electrostatic fields for both the field-aligned and cross-field injection in such experiments and to evaluate the sources of free energy and relative efficiencies for the generation of the VLF and HF emissions. It is shown that, for typical beam energies in active experiments, electromagnetic effects do not substantially change the bulk properties of the beam, spacecraft charging, and plasma particle acceleration. Through simulations, beam-generated whistlers; fundamental z-mode and harmonic x-mode radiation; and electrostatic electron-cyclotron, upper-hybrid, Langmuir, and lower-hybrid waves were identified. The characteristics of the observed wave spectra were found to be sensitive to both the ratio of the electron plasma frequency to the cyclotron frequency and the angle of injection relative to the magnetic field.

  5. National Synchrotron Light Source 2010 Activity Report

    SciTech Connect

    Rowe, M.; Snyder, K. J.

    2010-12-29

    This is a very exciting period for photon sciences at Brookhaven National Laboratory. It is also a time of unprecedented growth for the Photon Sciences Directorate, which operates the National Synchrotron Light Source (NSLS) and is constructing NSLS-II, both funded by the Department of Energy's Office of Science. Reflecting the quick pace of our activities, we chose the theme 'Discovery at Light Speed' for the directorate's 2010 annual report, a fiscal year bookended by October 2009 and September 2010. The year began with the news that NSLS users Venki Ramakrishnan of Cambridge University (also a former employee in Brookhaven's biology department) and Thomas A. Steitz of Yale University were sharing the 2009 Nobel Prize in Chemistry with Ada E. Yonath of the Weizmann Institute of Science. Every research project has the potential for accolades. In 2010, NSLS users and staff published close to 900 papers, with about 170 appearing in premiere journals. Those are impressive stats for a facility nearly three decades old, testament to the highly dedicated team keeping NSLS at peak performance and the high quality of its user community. Our NSLS users come from a worldwide community of scientists using photons, or light, to carry out research in energy and environmental sciences, physics, materials science, chemistry, biology and medicine. All are looking forward to the new capabilities enabled by NSLS-II, which will offer unprecedented resolution at the nanoscale. The new facility will produce x-rays more than 10,000 times brighter than the current NSLS and host a suite of sophisticated instruments for cutting-edge science. Some of the scientific discoveries we anticipate at NSLS-II will lead to major advances in alternative energy technologies, such as hydrogen and solar. These discoveries could pave the way to: (1) catalysts that split water with sunlight for hydrogen production; (2) materials that can reversibly store large quantities of electricity or hydrogen; (3

  6. Active Targets for Experiments with Rare Isotopes

    NASA Astrophysics Data System (ADS)

    Wiedenhoever, Ingo

    2014-09-01

    Experimental studies of un-bound nuclear states and nuclear reaction rates relevant for astrophysical processes are an important area of research with rare isotope beams. Both topics require the development of specialized experimental methods to study resonant reactions. The so-called active target approach, where the target material becomes part of the detection process, promises to combine high yields from thicker targets and low background with high resolution. This presentation will describe the implementation of the active-target technique in the ANASEN detector, which was developed by researchers from Louisiana State University and Florida State University. ANASEN was used in a number of stable and rare iosotope experiments in α- and proton scattering, as well as (α , p) and (d , p) reactions at FSU's in-flight radioactive beam facility RESOLUT. ANASEN also was used to perform the first experiment, proton scattering off a 37K beam at the ReA3 facility. Another active-target detector with a very different approach is found in the Active Target Time-Projection Chamber, which was developed by a collaboration between researchers from MSU, the University of Notre Dame, Western Michigan University, LLNL, LBNL, and St. Mary's University (Canada). First experiments with an AT-TPC prototype have been reported. The talk will summarize the results from the first experiments with these systems, describe further development and future research projects. Experimental studies of un-bound nuclear states and nuclear reaction rates relevant for astrophysical processes are an important area of research with rare isotope beams. Both topics require the development of specialized experimental methods to study resonant reactions. The so-called active target approach, where the target material becomes part of the detection process, promises to combine high yields from thicker targets and low background with high resolution. This presentation will describe the implementation of the

  7. HTGR nuclear heat source component design and experience

    SciTech Connect

    Peinado, C.O.; Wunderlich, R.G.; Simon, W.A.

    1982-05-01

    The high-temperature gas-cooled reactor (HTGR) nuclear heat source components have been under design and development since the mid-1950's. Two power plants have been designed, constructed, and operated: the Peach Bottom Atomic Power Station and the Fort St. Vrain Nuclear Generating Station. Recently, development has focused on the primary system components for a 2240-MW(t) steam cycle HTGR capable of generating about 900 MW(e) electric power or alternately producing high-grade steam and cogenerating electric power. These components include the steam generators, core auxiliary heat exchangers, primary and auxiliary circulators, reactor internals, and thermal barrier system. A discussion of the design and operating experience of these components is included.

  8. Permafrost Active Layer Seismic Interferometry Experiment (PALSIE).

    SciTech Connect

    Abbott, Robert; Knox, Hunter Anne; James, Stephanie; Lee, Rebekah; Cole, Chris

    2016-01-01

    We present findings from a novel field experiment conducted at Poker Flat Research Range in Fairbanks, Alaska that was designed to monitor changes in active layer thickness in real time. Results are derived primarily from seismic data streaming from seven Nanometric Trillium Posthole seismometers directly buried in the upper section of the permafrost. The data were evaluated using two analysis methods: Horizontal to Vertical Spectral Ratio (HVSR) and ambient noise seismic interferometry. Results from the HVSR conclusively illustrated the method's effectiveness at determining the active layer's thickness with a single station. Investigations with the multi-station method (ambient noise seismic interferometry) are continuing at the University of Florida and have not yet conclusively determined active layer thickness changes. Further work continues with the Bureau of Land Management (BLM) to determine if the ground based measurements can constrain satellite imagery, which provide measurements on a much larger spatial scale.

  9. Spallation Neutron Source Operating Experience and Outlook for Upgrades

    NASA Astrophysics Data System (ADS)

    Henderson, Stuart

    2010-03-01

    The Spallation Neutron Source (SNS) at Oak Ridge National Laboratory is a MW-class accelerator-driven pulsed neutron source. The SNS began formal operations in October 2006. Since then, the beam power has been increased to 1 MW, the number of operating hours per year has increased to nearly 5000, the availability has increased to 85%, and the number of operating neutron scattering instruments has increased to 13. Plans are in place to increase the beam power and availability to their design values of 1.4 MW and 90% over the next two years, and to continue the build-out of instruments to 16 by 2012. Two upgrade projects are in the planning stages. In the first, the beam power of the SNS is increased to at least 2 MW by raising the beam energy from 1.0 to 1.3 GeV and the beam current by 60%. In the second, a Second Target Station is constructed, and is powered by sharing beam pulses with the first target station. The operating experience will be described, as will the challenges that have been met along the path toward 1 MW beam power. The strategy for upgrades will also be presented.

  10. First experiments with gasdynamic ion source in CW mode

    NASA Astrophysics Data System (ADS)

    Skalyga, V.; Izotov, I.; Golubev, S.; Vodopyanov, A.; Tarvainen, O.

    2016-02-01

    A new type of ECR ion source—a gasdynamic ECR ion source—has been recently developed at the Institute of Applied Physics. The main advantages of such device are extremely high ion beam current with a current density up to 600-700 emA/cm2 in combination with low emittance, i.e., normalized RMS emittance below 0.1 π mm mrad. Previous investigations were carried out in pulsed operation with 37.5 or 75 GHz gyrotron radiation with power up to 100 kW at SMIS 37 experimental facility. The present work demonstrates the first experience of operating the gasdynamic ECR ion source in CW mode. A test bench of SMIS 24 facility has been developed at IAP RAS. 24 GHz radiation of CW gyrotron was used for plasma heating in a magnetic trap with simple mirror configuration. Initial studies of plasma parameters were performed. Ion beams with pulsed and CW high voltage were successfully extracted from the CW discharge. Obtained experimental results demonstrate that all advantages of the gasdynamic source can be realized also in CW operation.

  11. Regional lightning NOx sources during the TROCCINOX experiment

    NASA Astrophysics Data System (ADS)

    Mari, C.; Chaboureau, J. P.; Pinty, J. P.; Duron, J.; Mascart, P.; Cammas, J. P.; Gheusi, F.; Fehr, T.; Schlager, H.; Roiger, A.; Lichtenstein, M.; Stock, P.

    2006-12-01

    A lightning NOx (LiNOx) source has been implemented in the deep convection scheme of the Meso-NH mesoscale model following a mass-flux formalism coherent with the transport and scavenging of gases inside the convective scheme. In this approach the vertical transport of NO inside clouds is calculated by the parameterization of deep convective transport, thus eliminating the need for a-priori LiNOx profiles. Once produced inside the convective column, NO molecules are redistributed by updrafts and downdrafts and detrained in the environment when the conditions are favorable. The model was applied to three particular flights during the Tropical Convection, Cirrus and Nitrogen Oxides (TROCCINOX) campaign over the tropical area around Bauru on 3-4 March 2004. The convective activity during the three flights was investigated using brightness temperature at 10.7 μm observed from GOES-12 satellite. The use of a model-to-satellite approach reveals that the simulation appears rather realistic compared to the observations. The diurnal cycle of the simulated brightness temperature, CAPE, number of IC flashes, NO entrainment flux are in phase, with a succession of three marked peaks at 18:00 UTC (15:00 LT). These simulated peaks precede the observed afternoon one by about three hours. Comparison of the simulated NOx with observations along the flight tracks show that the model reproduces well the observed NOx levels when the LiNOx source is applied. The budget of entrainment, detrainment and LiNOx convective fluxes shows that the majority of the NO detrained back to the environment comes from lightning source inside the convective columns. Entrainment of NO from the environment and vertical transport from the boundary layer were not significant during the episode. The troposphere is impacted by detrainment fluxes of LiNOx from 4 km altitude to 16 km with maximum values around 14 km altitude. Detrainment fluxes vary between 75 kg(N)/s during nighttime to 400 kg(N)/s at the

  12. Aerosol source attributions and source-receptor relationships across the Northern Hemisphere ---- initial results from HTAP2 model experiments

    NASA Astrophysics Data System (ADS)

    Bian, H.; Chin, M.; Kucsera, T. L.; Torres, O.; Pan, X.

    2014-12-01

    Emissions and long-range transport of air pollution pose major concerns on air quality and climate change. To better assess the impact of intercontinental transport of air pollution on regional and global air quality, ecosystems, and near-term climate change, the UN Task Force on Hemispheric Transport of Air Pollution (HTAP) is organizing a phase II activity (HTAP2) that includes global and regional model experiments and data analysis, focusing on ozone and aerosols. This study presents the initial results of HTAP2 global aerosol modeling experiments. We will (a) evaluate the model results with surface and aircraft measurements, (b) examine the relative contributions of regional emission and extra-regional source on surface PM concentrations and column aerosol optical depth (AOD) over several NH pollution and dust source regions and the Arctic, and (c) quantify the source-receptor relationships in the pollution regions that reflect the sensitivity of regional aerosol amount to the regional and extra-regional emission reductions.

  13. Collaborative experiments of small autonomous systems at the SOURCE ATO capstone experiment

    NASA Astrophysics Data System (ADS)

    Gregory, Jason; Baran, David; Rogers, John; Fink, Jonathan; Delmerico, Jeffrey

    2013-05-01

    Autonomous systems operating in militarily-relevant environments are valuable assets due to the increased situational awareness they provide to the Warfighter. To further advance the current state of these systems, a collaborative experiment was conducted as part of the Safe Operations of Unmanned Systems for Reconnaissance in Complex Environments (SOURCE) Army Technology Objective (ATO). We present the findings from this large-scale experiment which spanned several research areas, including 3D mapping and exploration, communications maintenance, and visual intelligence. For 3D mapping and exploration, we evaluated loop closure using Iterative Closest Point (ICP). To improve current communications systems, the limitations of an existing mesh network were analyzed. Also, camera data from a Microsoft Kinect was used to test autonomous stairway detection and modeling algorithms. This paper will detail the experiment procedure and the preliminary results for each of these tests.

  14. Active array design for FAME: Freeform Active Mirror Experiment

    NASA Astrophysics Data System (ADS)

    Jaskó, Attila; Aitink-Kroes, Gabby; Agócs, Tibor; Venema, Lars; Hugot, Emmanuel; Schnetler, Hermine; Bányai, Evelin

    2014-07-01

    In this paper a status report is given on the development of the FAME (Freeform Active Mirror Experiment) active array. Further information regarding this project can be found in the paper by Venema et al. (this conference). Freeform optics provide the opportunity to drastically reduce the complexity of the future optical instruments. In order to produce these non-axisymmetric freeform optics with up to 1 mm deviation from the best fit sphere, it is necessary to come up with new design and manufacturing methods. The way we would like to create novel freeform optics is by fine tuning a preformed high surface-quality thin mirror using an array which is actively controlled by actuators. In the following we introduce the tools deployed to create and assess the individual designs. The result is an active array having optimal number and lay-out of actuators.

  15. Active Control of Aerodynamic Noise Sources

    NASA Technical Reports Server (NTRS)

    Reynolds, Gregory A.

    2001-01-01

    Aerodynamic noise sources become important when propulsion noise is relatively low, as during aircraft landing. Under these conditions, aerodynamic noise from high-lift systems can be significant. The research program and accomplishments described here are directed toward reduction of this aerodynamic noise. Progress toward this objective include correction of flow quality in the Low Turbulence Water Channel flow facility, development of a test model and traversing mechanism, and improvement of the data acquisition and flow visualization capabilities in the Aero. & Fluid Dynamics Laboratory. These developments are described in this report.

  16. Experience of Consolidation Of Disused Sources In Developing Countries, An African Perspective

    SciTech Connect

    Kifanga, L.D.; Mompome, W.K.; Shao, D.

    2008-07-01

    Application of sealed sources in agriculture, medicine and industry was used in many African countries without having any arrangements in place for managing the sources when their useful life was over. In Tanzania a substantial use of such sources was utilized. In the early days source management was not an area that was given the required attention hence a legacy associated with sealed sources became evident in many African countries and Tanzania was one of them. In the 90's Tanzania Atomic Energy Commission (TAEC), realized the scope of the waste problem and began to participate in an International Atomic Energy Agency Regional (IAEA) project on waste management. Tanzania in cooperation with IAEA initiated activities under the IAEA Technical Cooperation and the Regional projects 'Strengthening Waste Management Infrastructure, RAF/4/015'; and 'Sustaining the Waste Management Infrastructure RAF/3/005' which played a significant role. The first outcome of the project was realized in 1999, as the first 'Temporary Radioactive Waste Storage Facility' began to operate. This particular Storage facility gave the first impact as well as the need to develop this particular infrastructure further. As the project carried on, more and more orphan sources were recovered, collected and safely stored at the facility. As the use of nuclear technology was expanding and the identification of the extent of sealed sources in the countries became more defined, the need to develop a 'Central Radioactive Waste Management Facility' (CRWMF) was becoming more desired. The central radioactive waste storage facility was constructed and commissioned in 2005. The facility was more advanced and could be used for much longer periods of time, as one of the most advanced storage facility in the Region. At present a large number of disused sources from various industries as well as from different activities are being stored at the facility. Tanzanian authorities are also planning to initiate a

  17. Advanced Light Source: Activity report 1993

    SciTech Connect

    Not Available

    1994-11-01

    The Advanced Light Source (ALS) produces the world`s brightest light in the ultraviolet and soft x-ray regions of the spectrum. The first low-energy third-generation synchrotron source in the world, the ALS provides unprecedented opportunities for research in science and technology not possible anywhere else. This year marked the beginning of operations and the start of the user research program at the ALS, which has already produced numerous high quality results. A national user facility located at Lawrence Berkeley Laboratory of the University of California, the ALS is available to researchers from academia, industry, and government laboratories. This report contains the following: (1) director`s message; (2) operations overview; (3) user program; (4) users` executive committee; (5) industrial outreach; (6) accelerator operations; (7) beamline control system; (8) insertion devices; (9) experimental systems; (10) beamline engineering; (11) first results from user beamlines; (12) beamlines for 1994--1995; (13) special events; (14) publications; (15) advisory panels; and (16) ALS staff.

  18. Regional lightning NOx sources during the TROCCINOX experiment

    NASA Astrophysics Data System (ADS)

    Mari, C.; Chaboureau, J. P.; Pinty, J. P.; Duron, J.; Mascart, P.; Cammas, J. P.; Gheusi, F.; Fehr, T.; Schlager, H.; Roiger, A.; Lichtenstein, M.; Stock, P.

    2006-06-01

    A lightning NOx source (LiNOx) has been implemented in the deep convection scheme of the Meso-NH mesoscale model following a mass-flux formalism coherent with the transport and scavenging of gases inside the convective scheme. No a-priori vertical placement of LiNOx is necessary with this approach. In this approach the vertical transport of NO inside clouds is calculated by the parameterization of deep convective transport, thus eliminating the need for a-priori LiNOx. Once produced inside the convective column, NO molecules are redistributed by updrafts and downdrafts and detrained in the environment when the conditions are favorable. The model was applied to three particular flights during the Tropical Convection, Cirrus and Nitrogen Oxides (TROCCINOX) campaign over the tropical area around Bauru on 3-4 March 2004. The convective activity during the three flights was investigated using brightness temperature at 10.7 µm observed from GOES-12 satellite. The use of a model-to-satellite approach reveals that the simulation appears rather realistic compared to the observations. The diurnal cycle of the simulated brightness temperature, CAPE, number of IC lightning, NO entrainment flux are in phase, with a succession of three marked peaks at 18:00 UTC (15:00 LT). These simulated peaks precede the observed afternoon one by about three hours. Comparison of the simulated NOx with observations along the flight tracks show that the model reproduces well the observed NOx levels when the LiNOx source is applied. The budget of entrainment, detrainment and LiNOx convective fluxes shows that the majority of the NO detrained back to the environment comes from lightning source inside the convective columns. Entrainment of NO from the environment and vertical transport from the boundary layer were not significant during the episode. The troposphere is impacted by detrainment fluxes of LiNOx from 4 km altitude to 16 km with maximum values around 14 km altitude. Detrainment fluxes

  19. The Thermal Ion Dynamics Experiment and Plasma Source Instrument

    NASA Technical Reports Server (NTRS)

    Moore, T. E.; Chappell, C. R.; Chandler, M. O.; Fields, S. A.; Pollock, C. J.; Reasoner, D. L.; Young, D. T.; Burch, J. L.; Eaker, N.; Waite, J. H., Jr.; McComas, D. J.; Nordholdt, J. E.; Thomsen, M. F.; Berthelier, J. J.; Robson, R.

    1995-01-01

    The Thermal Ion Dynamics Experiment (TIDE) and the Plasma Source Instrument (PSI) have been developed in response to the requirements of the ISTP Program for three-dimensional (3D) plasma composition measurements capable of tracking the circulation of low-energy (0-500 eV) plasma through the polar magnetosphere. This plasma is composed of penetrating magnetosheath and escaping ionospheric components. It is in part lost to the downstream solar wind and in part recirculated within the magnetosphere, participating in the formation of the diamagnetic hot plasma sheet and ring current plasma populations. Significant obstacles which have previously made this task impossible include the low density and energy of the outflowing ionospheric plasma plume and the positive spacecraft floating potentials which exclude the lowest-energy plasma from detection on ordinary spacecraft. Based on a unique combination of focusing electrostatic ion optics and time of flight detection and mass analysis, TIDE provides the sensitivity (seven apertures of about 1 cm squared effective area each) and angular resolution (6 x 18 degrees) required for this purpose. PSI produces a low energy plasma locally at the POLAR spacecraft that provides the ion current required to balance the photoelectron current, along with a low temperature electron population, regulating the spacecraft potential slightly positive relative to the space plasma. TIDE/PSI will: (a) measure the density and flow fields of the solar and terrestrial plasmas within the high polar cap and magnetospheric lobes; (b) quantify the extent to which ionospheric and solar ions are recirculated within the distant magnetotail neutral sheet or lost to the distant tail and solar wind; (c) investigate the mass-dependent degree energization of these plasmas by measuring their thermodynamic properties; (d) investigate the relative roles of ionosphere and solar wind as sources of plasma to the plasma sheet and ring current.

  20. The Enlightenment Revisited: Sources & Interpretations. Learning Activities.

    ERIC Educational Resources Information Center

    Donato, Clorinda; And Others

    This resource book provides 26 learning activities with background materials for teaching about the Enlightenment. Topics include: (1) "What Was the Enlightenment?"; (2) "An Introduction to the Philosophes"; (3) "Was the Enlightenment a Revolt Against Rationalism?"; (4) "Were the Philosophes Democrats? A Comparison of the 'Enlightened' Ideas of…

  1. The central power source in active galaxies

    NASA Astrophysics Data System (ADS)

    Ptak, Roger; Stoner, Ronald

    Potential sources for the central power in AGN are examined. The continuum, emission line profiles, and time variability and broad emission line region for AGN are analyzed. The supermassive black hole hypothesis, the supermassive magnetized core model of Kundt (1978), and the model of Stoner and Ptak (1984) in which the supermassive stars maintain a kind of long-term quasi-stability, but accretion is balanced by mass loss and spherical bursts rather than in jets are considered. It is argued that the hypothesis that the supermassive blackholes are the central engines for AGN is based on theoretical principles; however, AGN emission line profiles and variability suggest a spherical geometry for the observed components of these engines. Also the supermassive black hole models do not account for all the AGN observations.

  2. Middeck Active Control Experiment (MACE), phase A

    NASA Technical Reports Server (NTRS)

    Crawley, Edward F.; Deluis, Javier; Miller, David W.

    1989-01-01

    A rationale to determine which structural experiments are sufficient to verify the design of structures employing Controlled Structures Technology was derived. A survey of proposed NASA missions was undertaken to identify candidate test articles for use in the Middeck Active Control Experiment (MACE). The survey revealed that potential test articles could be classified into one of three roles: development, demonstration, and qualification, depending on the maturity of the technology and the mission the structure must fulfill. A set of criteria was derived that allowed determination of which role a potential test article must fulfill. A review of the capabilities and limitations of the STS middeck was conducted. A reference design for the MACE test article was presented. Computing requirements for running typical closed-loop controllers was determined, and various computer configurations were studied. The various components required to manufacture the structure were identified. A management plan was established for the remainder of the program experiment development, flight and ground systems development, and integration to the carrier. Procedures for configuration control, fiscal control, and safety, reliabilty, and quality assurance were developed.

  3. Pixel Detectors For Diffraction Experiments At The Swiss Light Source

    SciTech Connect

    Huelsen, G.; Eikenberry, E.F.; Schmitt, B.; Schulze-Briese, C.; Tomizaki, T.; Stampanoni, M.; Willmott, P.; Patterson, B.; Broennimann, Ch.; Horisberger, R.; Toyokawa, H.; Borchert, G. L.

    2004-05-12

    The PILATUS detector (Pixel Apparatus for the SLS) is a large, quantum-limited area X-ray detector for protein crystallography which is currently under construction. Its basic units are modules with 16 CMOS chips bump-bonded to a large, continuously sensitive silicon sensor with 157x366 pixels of 217x217 {mu}m2, leading to an active area of 34x80 mm2. With a counting circuit in each pixel, X-rays are detected in single photon counting mode, leading to excellent, noise-free data. The main properties of the detector are an energy range of 6 to 30 keV, no back-ground due to leakage current or readout-noise, fast read-out time of 6.7 ms, a rate/pixel >104/s and a PSF of one pixel. PILATUS detectors are installed at the SLS X06SA protein crystallography beamline, and at both the surface diffraction (SD) station and the radiography and tomography (XTM) station of beamline X04SA. The detectors are operated at room temperature and thus are very easy to use. Experiments benefit from the ability to detect very weak diffraction spots with high precision. At the SD station and at the XTM station, which is equipped with a Bragg magnifier, diffraction, radiography and tomography experiments showed promising results. At beamline X06SA, a three-module array (1120x157 pixels) with a readout time of 6.7 ms was tested. This system was used to collect fine phi-sliced protein crystal data in continuous sample rotation mode in which the crystal was continuously rotated with a slow angular velocity of 0.04 deg./s without any shutter operation. Exposure time per frame ranged from 100 ms to a few seconds, depending on the crystal. These initial experiments show the potential of this method.

  4. Source-based neurofeedback methods using EEG recordings: training altered brain activity in a functional brain source derived from blind source separation

    PubMed Central

    White, David J.; Congedo, Marco; Ciorciari, Joseph

    2014-01-01

    A developing literature explores the use of neurofeedback in the treatment of a range of clinical conditions, particularly ADHD and epilepsy, whilst neurofeedback also provides an experimental tool for studying the functional significance of endogenous brain activity. A critical component of any neurofeedback method is the underlying physiological signal which forms the basis for the feedback. While the past decade has seen the emergence of fMRI-based protocols training spatially confined BOLD activity, traditional neurofeedback has utilized a small number of electrode sites on the scalp. As scalp EEG at a given electrode site reflects a linear mixture of activity from multiple brain sources and artifacts, efforts to successfully acquire some level of control over the signal may be confounded by these extraneous sources. Further, in the event of successful training, these traditional neurofeedback methods are likely influencing multiple brain regions and processes. The present work describes the use of source-based signal processing methods in EEG neurofeedback. The feasibility and potential utility of such methods were explored in an experiment training increased theta oscillatory activity in a source derived from Blind Source Separation (BSS) of EEG data obtained during completion of a complex cognitive task (spatial navigation). Learned increases in theta activity were observed in two of the four participants to complete 20 sessions of neurofeedback targeting this individually defined functional brain source. Source-based EEG neurofeedback methods using BSS may offer important advantages over traditional neurofeedback, by targeting the desired physiological signal in a more functionally and spatially specific manner. Having provided preliminary evidence of the feasibility of these methods, future work may study a range of clinically and experimentally relevant brain processes where individual brain sources may be targeted by source-based EEG neurofeedback. PMID

  5. A 220Rn source for the calibration of low-background experiments

    NASA Astrophysics Data System (ADS)

    Lang, R. F.; Brown, A.; Brown, E.; Cervantes, M.; Macmullin, S.; Masson, D.; Schreiner, J.; Simgen, H.

    2016-04-01

    We characterize two 40 kBq sources of electrodeposited 228Th for use in low-background experiments. The sources efficiently emanate 220Rn, a noble gas that can diffuse in a detector volume. 220Rn and its daughter isotopes produce α-, β-, and γ-radiation, which may used to calibrate a variety of detector responses and features, before decaying completely in only a few days. We perform various tests to place limits on the release of other long-lived isotopes. In particular, we find an emanation of < 0.008 atoms/min/kBq (90% CL) for 228Th and (1.53 ± 0.04) atoms/min/kBq for 224Ra. The sources lend themselves in particular to the calibration of detectors employing liquid noble elements such as argon and xenon. With the source mounted in a noble gas system, we demonstrate that filters are highly efficient in reducing the activity of these longer-lived isotopes further. We thus confirm the suitability of these sources even for use in next-generation experiments, such as XENON1T/XENONnT, LZ, and nEXO.

  6. An experiment to measure the electron neutrino mass using a cryogenic tritium source

    SciTech Connect

    Fackler, O.; Jeziorski, B.; Kolos, W.; Monkhorst, H.; Mugge, M.; Sticker, H.; Szalewicz, K.; White, R.M.; Woerner, R.

    1985-06-25

    An experiment has been performed to determine the electron neutrino mass with the precision of a few eV by measuring the tritium beta decay energy distribution near the endpoint. Key features of the experiment are a 2 eV resolution electrostatic spectrometer and a high-activity frozen tritium source. It is important that the source have electronic wavefunctions which can be accurately calculated. These calculations have been made for tritium and the HeT/sup +/ daughter ion and allow determination of branching fractions to 0.1% and energy of the excited states to 0.1 eV. The excited final molecular state calculations and the experimental apparatus are discussed. 4 refs., 5 figs.

  7. Hyperthermal atomic oxygen source for near-space simulation experiments

    SciTech Connect

    Dodd, James A.; Baker, Paul M.; Hwang, Eunsook S.; Sporleder, David; Stearns, Jaime A.; Chambreau, Steven D.; Braunstein, Matthew; Conforti, Patrick F.

    2009-09-15

    A hyperthermal atomic oxygen (AO) beam facility has been developed to investigate the collisions of high-velocity AO atoms with vapor-phase counterflow. Application of 4.5 kW, 2.4 GHz microwave power in the source chamber creates a continuous discharge in flowing O{sub 2} gas. The O{sub 2} feedstock is introduced into the source chamber in a vortex flow to constrain the plasma to the center region, with the chamber geometry promoting resonant excitation of the TM{sub 011} mode to localize the energy deposition in the vicinity of the aluminum nitride (AlN) expansion nozzle. The approximately 3500 K environment serves to dissociate the O{sub 2}, resulting in an effluent consisting of 40% AO by number density. Downstream of the nozzle, a silicon carbide (SiC) skimmer selects the center portion of the discharge effluent, prior to the expansion reaching the first shock front and rethermalizing, creating a beam with a derived 2.5 km s{sup -1} velocity. Differential pumping of the skimmer chamber, an optional intermediate chamber and reaction chamber maintains a reaction chamber pressure in the mid-10{sup -6} to mid-10{sup -5} Torr range. The beam has been characterized with regard to total AO beam flux, O{sub 2} dissociation fraction, and AO spatial profile using time-of-flight mass spectrometric and Kapton-H erosion measurements. A series of reactions AO+C{sub n}H{sub 2n} (n=2-4) has been studied under single-collision conditions using mass spectrometric product detection, and at higher background pressure detecting dispersed IR emissions from primary and secondary products using a step-scan Michelson interferometer. In a more recent AO crossed-beam experiment, number densities and predicted IR emission intensities have been modeled using the direct simulation Monte Carlo technique. The results have been used to guide the experimental conditions. IR emission intensity predictions are compared to detected signal levels to estimate absolute reaction cross sections.

  8. Hyperthermal atomic oxygen source for near-space simulation experiments.

    PubMed

    Dodd, James A; Baker, Paul M; Hwang, Eunsook S; Sporleder, David; Stearns, Jaime A; Chambreau, Steven D; Braunstein, Matthew; Conforti, Patrick F

    2009-09-01

    A hyperthermal atomic oxygen (AO) beam facility has been developed to investigate the collisions of high-velocity AO atoms with vapor-phase counterflow. Application of 4.5 kW, 2.4 GHz microwave power in the source chamber creates a continuous discharge in flowing O(2) gas. The O(2) feedstock is introduced into the source chamber in a vortex flow to constrain the plasma to the center region, with the chamber geometry promoting resonant excitation of the TM(011) mode to localize the energy deposition in the vicinity of the aluminum nitride (AlN) expansion nozzle. The approximately 3500 K environment serves to dissociate the O(2), resulting in an effluent consisting of 40% AO by number density. Downstream of the nozzle, a silicon carbide (SiC) skimmer selects the center portion of the discharge effluent, prior to the expansion reaching the first shock front and rethermalizing, creating a beam with a derived 2.5 km s(-1) velocity. Differential pumping of the skimmer chamber, an optional intermediate chamber and reaction chamber maintains a reaction chamber pressure in the mid-10(-6) to mid-10(-5) Torr range. The beam has been characterized with regard to total AO beam flux, O(2) dissociation fraction, and AO spatial profile using time-of-flight mass spectrometric and Kapton-H erosion measurements. A series of reactions AO+C(n)H(2n) (n=2-4) has been studied under single-collision conditions using mass spectrometric product detection, and at higher background pressure detecting dispersed IR emissions from primary and secondary products using a step-scan Michelson interferometer. In a more recent AO crossed-beam experiment, number densities and predicted IR emission intensities have been modeled using the direct simulation Monte Carlo technique. The results have been used to guide the experimental conditions. IR emission intensity predictions are compared to detected signal levels to estimate absolute reaction cross sections. PMID:19791929

  9. Sources of Stress, Coping Strategies, Emotional Experience: Effects of the Level of Experience in Primary School Teachers in France

    ERIC Educational Resources Information Center

    Carton, Annie; Fruchart, Eric

    2014-01-01

    This study attempted to determine whether the level of experience affected sources of stress, coping responses and emotional experience in primary school teachers. The first aim was to identify sources of stress and to evaluate coping strategies using the questionnaire of Graziani et al. ("Journal de Thérapie Comportementale et…

  10. The Middeck Active Control Experiment (MACE)

    NASA Technical Reports Server (NTRS)

    Miller, David W.; Sepe, Raymond B.; Rey, Daniel; Saarmaa, Erik; Crawley, Edward F.

    1993-01-01

    The Middeck Active Control Experiment (MACE) is a NASA In-Step and Control Structure Interaction (CSI) Office funded Shuttle middeck experiment. The objective is to investigate the extent to which closed-loop behavior of flexible spacecraft in zero-gravity (0-g) can be predicted. This prediction becomes particularly difficult when dynamic behavior during ground testing exhibits extensive suspension and direct gravity coupling. On-orbit system identification and control reconfiguration is investigated to improve performance which would otherwise be limited due to errors in prediction. The program is presently in its preliminary design phase with launch expected in the summer of 1994. The MACE test article consists of three attitude control torque wheels, a two axis gimballing payload, inertial sensors and a flexible support structure. With the acquisition of a second payload, this will represent a multiple payload platform with significant structural flexibility. This paper presents on-going work in the areas of modelling and control of the MACE test article in the zero and one-gravity environments. Finite element models, which include suspension and gravity effects, and measurement models, derived from experimental data, are used as the basis for Linear Quadratic Gaussian controller designs. Finite element based controllers are analytically used to study the differences in closed-loop performance as the test article transitions between the 0-g and 1-g environments. Measurement based controllers are experimentally applied to the MACE test article in the 1-g environment and achieve over an order of magnitude improvement in payload pointing accuracy when disturbed by a broadband torque disturbance. The various aspects of the flight portion of the experiment are also discussed.

  11. The Middeck Active Control Experiment (MACE)

    NASA Astrophysics Data System (ADS)

    Miller, David W.; Sepe, Raymond B.; Rey, Daniel; Saarmaa, Erik; Crawley, Edward F.

    1993-02-01

    The Middeck Active Control Experiment (MACE) is a NASA In-Step and Control Structure Interaction (CSI) Office funded Shuttle middeck experiment. The objective is to investigate the extent to which closed-loop behavior of flexible spacecraft in zero-gravity (0-g) can be predicted. This prediction becomes particularly difficult when dynamic behavior during ground testing exhibits extensive suspension and direct gravity coupling. On-orbit system identification and control reconfiguration is investigated to improve performance which would otherwise be limited due to errors in prediction. The program is presently in its preliminary design phase with launch expected in the summer of 1994. The MACE test article consists of three attitude control torque wheels, a two axis gimballing payload, inertial sensors and a flexible support structure. With the acquisition of a second payload, this will represent a multiple payload platform with significant structural flexibility. This paper presents on-going work in the areas of modelling and control of the MACE test article in the zero and one-gravity environments. Finite element models, which include suspension and gravity effects, and measurement models, derived from experimental data, are used as the basis for Linear Quadratic Gaussian controller designs. Finite element based controllers are analytically used to study the differences in closed-loop performance as the test article transitions between the 0-g and 1-g environments. Measurement based controllers are experimentally applied to the MACE test article in the 1-g environment and achieve over an order of magnitude improvement in payload pointing accuracy when disturbed by a broadband torque disturbance. The various aspects of the flight portion of the experiment are also discussed.

  12. Convoy Active Safety Technologies Warfighter Experiment I

    NASA Astrophysics Data System (ADS)

    Schoenherr, Edward; Theisen, Bernard L.; Animashaun, Asisat; Davis, James, Jr.; Day, Christopher

    2008-04-01

    The operational ability to project and sustain forces in distant, anti-access and area denial environments poses new challenges for combatant commanders. One of the new challenges is the ability to conduct sustainment operations at operationally feasible times and places on the battlefield. Combatant commanders require a sustainment system that is agile, versatile, and survivable throughout the range of military operations and across the spectrum of conflict. A key component of conducting responsive, operationally feasible sustainment operations is the ability to conduct sustainment convoys. Sustainment convoys are critical to providing combatant commanders the right support, at the right time and place, and in the right quantities, across the full range of military operations. The ability to conduct sustainment convoys in a variety of hostile environments require force protection measures that address the enemy threat and protect the Soldier. One cost effective, technically feasible method of increasing the force protection for sustainment convoys is the use of robotic follower technology and autonomous navigation. The Convoy Active Safety Technologies (CAST) system is a driver assist, convoy autopilot technology aimed to address these issues. Warfigher Experiment I, held at A.P. Hill, VA in the fall of 2007, tested the utility of this vehicle following technology not only in measures of system integrity and performance vs. manual driving, but also the physiological effects on the operators themselves. This paper will detail the Warfigher Experiment's methodology, analysis, results and conclusions.

  13. Tanshinones: Sources, Pharmacokinetics and Anti-Cancer Activities

    PubMed Central

    Zhang, Yong; Jiang, Peixin; Ye, Min; Kim, Sung-Hoon; Jiang, Cheng; Lü, Junxuan

    2012-01-01

    Tanshinones are a class of abietane diterpene compound isolated from Salvia miltiorrhiza (Danshen or Tanshen in Chinese), a well-known herb in Traditional Chinese Medicine (TCM). Since they were first identified in the 1930s, more than 40 lipophilic tanshinones and structurally related compounds have been isolated from Danshen. In recent decades, numerous studies have been conducted to investigate the isolation, identification, synthesis and pharmacology of tanshinones. In addition to the well-studied cardiovascular activities, tanshinones have been investigated more recently for their anti-cancer activities in vitro and in vivo. In this review, we update the herbal and alternative sources of tanshinones, and the pharmacokinetics of selected tanshinones. We discuss anti-cancer properties and identify critical issues for future research. Whereas previous studies have suggested anti-cancer potential of tanshinones affecting multiple cellular processes and molecular targets in cell culture models, data from in vivo potency assessment experiments in preclinical models vary greatly due to lack of uniformity of solvent vehicles and routes of administration. Chemical modifications and novel formulations had been made to address the poor oral bioavailability of tanshinones. So far, human clinical trials have been far from ideal in their design and execution for the purpose of supporting an anti-cancer indication of tanshinones. PMID:23202971

  14. Phase 1 immobilized low-activity waste operational source term

    SciTech Connect

    Burbank, D.A.

    1998-03-06

    This report presents an engineering analysis of the Phase 1 privatization feeds to establish an operational source term for storage and disposal of immobilized low-activity waste packages at the Hanford Site. The source term information is needed to establish a preliminary estimate of the numbers of remote-handled and contact-handled waste packages. A discussion of the uncertainties and their impact on the source term and waste package distribution is also presented. It should be noted that this study is concerned with operational impacts only. Source terms used for accident scenarios would differ due to alpha and beta radiation which were not significant in this study.

  15. Modeling active memory: Experiment, theory and simulation

    NASA Astrophysics Data System (ADS)

    Amit, Daniel J.

    2001-06-01

    Neuro-physiological experiments on cognitively performing primates are described to argue that strong evidence exists for localized, non-ergodic (stimulus specific) attractor dynamics in the cortex. The specific phenomena are delay activity distributions-enhanced spike-rate distributions resulting from training, which we associate with working memory. The anatomy of the relevant cortex region and the physiological characteristics of the participating elements (neural cells) are reviewed to provide a substrate for modeling the observed phenomena. Modeling is based on the properties of the integrate-and-fire neural element in presence of an input current of Gaussian distribution. Theory of stochastic processes provides an expression for the spike emission rate as a function of the mean and the variance of the current distribution. Mean-field theory is then based on the assumption that spike emission processes in different neurons in the network are independent, and hence the input current to a neuron is Gaussian. Consequently, the dynamics of the interacting network is reduced to the computation of the mean and the variance of the current received by a cell of a given population in terms of the constitutive parameters of the network and the emission rates of the neurons in the different populations. Within this logic we analyze the stationary states of an unstructured network, corresponding to spontaneous activity, and show that it can be stable only if locally the net input current of a neuron is inhibitory. This is then tested against simulations and it is found that agreement is excellent down to great detail. A confirmation of the independence hypothesis. On top of stable spontaneous activity, keeping all parameters fixed, training is described by (Hebbian) modification of synapses between neurons responsive to a stimulus and other neurons in the module-synapses are potentiated between two excited neurons and depressed between an excited and a quiescent neuron

  16. Snoezelen activity: the Good Shepherd Nursing Home experience.

    PubMed

    Minner, De; Hoffstetter, Patty; Casey, Linda; Jones, Delores

    2004-01-01

    Care of the resident with dementia can be both challenging and unpredictable. Activities provided for nursing home residents often have rules and may be a source of frustration for residents with advancing dementia. Snoezelen, or multisensory therapy, offers a failure-free activity in an enabling environment that can both stimulate and relax the resident with dementia. Good Shepherd Nursing Home in Versailles, Mo, undertook a 1-year outcome-based quality improvement project to find if use of Snoezelen therapy could reduce the number of behavioral symptoms that residents were suffering from. While there are still barriers to the use Snoezelen therapy, employees at Good Shepherd Nursing Home believe that the use of Snoezelen therapy has been a successful and rewarding experience for both residents and staff members. PMID:15535540

  17. Large-N Over the Source Physics Experiment (SPE) Phase I and Phase II Test Beds

    NASA Astrophysics Data System (ADS)

    Snelson, C. M.; Carmichael, J. D.; Mellors, R. J.; Abbott, R. E.

    2014-12-01

    One of the current challenges in the field of monitoring and verification is source discrimination of low-yield nuclear explosions from background seismicity, both natural and anthropogenic. Work is underway at the Nevada National Security Site to conduct a series of chemical explosion experiments using a multi-institutional, multi-disciplinary approach. The goal of this series of experiments, called the Source Physics Experiments (SPE), is to refine the understanding of the effect of earth structures on source phenomenology and energy partitioning in the source region, the transition of seismic energy from the near field to the far field, and the development of S waves observed in the far field. To fully explore these problems, the SPE series includes tests in both hard and soft rock geologic environments. The project comprises a number of activities, which range from characterizing the shallow subsurface to acquiring new explosion data from both the near field (<100 m) and the far field (>100 m). SPE includes a series of planned explosions (with different yields and depths of burials), which are conducted in the same hole and monitored by a diverse set of sensors recording characteristics of the explosions, ground-shock, seismo-acoustic energy propagation. This presentation focuses on imaging the full 3D wavefield over hard rock and soft rock test beds using a large number of seismic sensors. This overview presents statistical analyses of optimal sensor layout required to estimate wavefield discriminants and the planned deployment for the upcoming experiments. This work was conducted under Contract No. DE-AC52-06NA25946 with the U.S. Department of Energy. Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000.

  18. Post-Shot Surface Damage Detected with LIDAR at the Source Physics Experiment Site (Invited)

    NASA Astrophysics Data System (ADS)

    Schultz-Fellenz, E. S.; Sussman, A. J.; Kelley, R. E.; Cooper, D. I.

    2013-12-01

    Designed to improve long-range treaty monitoring capabilities, the Source Physics Experiment series is being conducted at a location in Nevada and provides an opportunity to advance near-field monitoring and field-based investigations of suspected underground test locations. In particular, features associated with underground testing can be evaluated using Source Physics Experiment activities as analogs, linking on-site inspections with remote sensing technologies. Following a calibration shot (SPE 1), SPE 2 (10/2011) and SPE 3 (07/2012) were performed in the same emplacement hole with 1.0 ton of explosives at 150 ft depth. A fourth shot (SPE 4) is planned for August 2013 as a 220 lb (100 kg) TNT equivalent shot at a depth of 315 ft (96 m). Because one of the goals of the Source Physics Experiments is to determine damage effects on seismic wave propagation and improve modeling capabilities, a key component in the predictive component and ultimate validation of the models is a full understanding of the intervening geology between the source and instrumented bore holes. Ground-based LIDAR and fracture mapping, mechanical properties determined via laboratory testing of rock core, discontinuity analysis and optical microscopy of the core rocks were performed prior to and following each experiment. Results of the LIDAR collects from both SPE 2 and 3 indicate a permanent ground displacement of up to several centimeters aligning along the projected surface traces of two faults observed in the core and fractures mapped at the surface. Work by Los Alamos National Laboratory was sponsored by the National Nuclear Security Administration Award No. DE-AC52-06NA25946.

  19. A Mid-infrared Census of Star Formation Activity in Bolocam Galactic Plane Survey Sources

    NASA Astrophysics Data System (ADS)

    Dunham, Miranda K.; Robitaille, Thomas P.; Evans, Neal J., II; Schlingman, Wayne M.; Cyganowski, Claudia J.; Urquhart, James

    2011-04-01

    We present the results of a search for mid-infrared signs of star formation activity in the 1.1 mm sources in the Bolocam Galactic Plane Survey (BGPS). We have correlated the BGPS catalog with available mid-IR Galactic plane catalogs based on the Spitzer Space Telescope GLIMPSE legacy survey and the Midcourse Space Experiment (MSX) Galactic plane survey. We find that 44% (3712 of 8358) of the BGPS sources contain at least one mid-IR source, including 2457 of 5067 (49%) within the area where all surveys overlap (10° < ell < 65°). Accounting for chance alignments between the BGPS and mid-IR sources, we conservatively estimate that 20% of the BPGS sources within the area where all surveys overlap show signs of active star formation. We separate the BGPS sources into four groups based on their probability of star formation activity. Extended Green Objects and Red MSX Sources make up the highest probability group, while the lowest probability group is comprised of "starless" BGPS sources which were not matched to any mid-IR sources. The mean 1.1 mm flux of each group increases with increasing probability of active star formation. We also find that the "starless" BGPS sources are the most compact, while the sources with the highest probability of star formation activity are on average more extended with large skirts of emission. A subsample of 280 BGPS sources with known distances demonstrates that mass and mean H2 column density also increase with probability of star formation activity.

  20. Superthermal source of ultracold neutrons for fundamental physics experiments.

    PubMed

    Zimmer, Oliver; Piegsa, Florian M; Ivanov, Sergey N

    2011-09-23

    Ultracold neutrons (UCNs) play an important role for precise measurements of the properties of the neutron and its interactions. During the past 25 years, a neutron turbine coupled to a liquid deuterium cold neutron source at a high-flux reactor has defined the state of the art for UCN production, despite a long history of efforts towards a new generation of UCN sources. This Letter reports a world-best UCN density available for users, achieved with a new source based on conversion of cold neutrons in superfluid helium. A conversion volume of 5 liters provides at least 274,000 UCN in a single accumulation run. Cyclically repeated operation of the source has been demonstrated, as well. PMID:22026860

  1. Superthermal Source of Ultracold Neutrons for Fundamental Physics Experiments

    SciTech Connect

    Zimmer, Oliver; Piegsa, Florian M.; Ivanov, Sergey N.

    2011-09-23

    Ultracold neutrons (UCNs) play an important role for precise measurements of the properties of the neutron and its interactions. During the past 25 years, a neutron turbine coupled to a liquid deuterium cold neutron source at a high-flux reactor has defined the state of the art for UCN production, despite a long history of efforts towards a new generation of UCN sources. This Letter reports a world-best UCN density available for users, achieved with a new source based on conversion of cold neutrons in superfluid helium. A conversion volume of 5 liters provides at least 274 000 UCN in a single accumulation run. Cyclically repeated operation of the source has been demonstrated, as well.

  2. EMITTING ELECTRONS AND SOURCE ACTIVITY IN MARKARIAN 501

    SciTech Connect

    Mankuzhiyil, Nijil; Ansoldi, Stefano; Persic, Massimo; Rivers, Elizabeth; Rothschild, Richard; Tavecchio, Fabrizio

    2012-07-10

    We study the variation of the broadband spectral energy distribution (SED) of the BL Lac object Mrk 501 as a function of source activity, from quiescent to flaring. Through {chi}{sup 2}-minimization we model eight simultaneous SED data sets with a one-zone synchrotron self-Compton (SSC) model, and examine how model parameters vary with source activity. The emerging variability pattern of Mrk 501 is complex, with the Compton component arising from {gamma}-e scatterings that sometimes are (mostly) Thomson and sometimes (mostly) extreme Klein-Nishina. This can be seen from the variation of the Compton to synchrotron peak distance according to source state. The underlying electron spectra are faint/soft in quiescent states and bright/hard in flaring states. A comparison with Mrk 421 suggests that the typical values of the SSC parameters are different in the two sources: however, in both jets the energy density is particle-dominated in all states.

  3. 1994 Activity Report, National Synchrotron Light Source. Annual report, October 1, 1993-September 30, 1994

    SciTech Connect

    Rothman, E.Z.

    1995-05-01

    This report is a summary of activities carried out at the National Synchrotron Light Source during 1994. It consists of sections which summarize the work carried out in differing scientific disciplines, meetings and workshops, operations experience of the facility, projects undertaken for upgrades, administrative reports, and collections of abstracts and publications generated from work done at the facility.

  4. Active radiation hardening technology for fiber-optic source

    NASA Astrophysics Data System (ADS)

    Yang, Yuanhong; Suo, Xinxin; Yang, Mingwei

    2013-09-01

    We demonstrated an active radiation hardening technology for fiber optic source developed for high performance fiber optic gyroscope. The radiation characteristic of erbium-doped fiber was studied experimentally. The radiation induced attenuation (RIA) at 980nm pump light was identified to be the main reason for the degradation and there was photo-bleaching effect in EDF too. A variable parameters control technology was proposed and taken to keep the 980nm and 1550nm light energy stable and high stability and radiation-resistance fiber source with gauss profile spectrum was realized .The source can stand against more than 50 krad (Si) total radiation dose.

  5. Students' Source Misuse in Language Classrooms: Sharing Experiences

    ERIC Educational Resources Information Center

    Fazel, Ismaeil; Kowkabi, Nasrin

    2013-01-01

    In this article we first provide a brief discussion of what is generally referred to as "student plagiarism," which we prefer to call "source misuse" or "inappropriate textual borrowing," and then provide some of the factors that may contribute to this problem in language classes. Moreover, we provide our views and…

  6. UW MCNP source patch for the EPFL Haefely source. EPFL (Swiss) fusion-fission hybrid experiment

    SciTech Connect

    McKinney, G; Woodruff, G L

    1986-06-01

    The development of a source patch which describes the Haefely neutron source for use in the MCNP Monte Carlo code has been described in progress reports of the EPFL (Swiss) Fusion Blanket Project at the University of Washington. The most recent of these reports dealing with the source patch was Progress Report No. 14. This report reviews some of the physical description included in the report, and also includes additional details of the patch as well as a listing of the patch itself.

  7. Source term experiments project (STEP): aerosol characterization system

    SciTech Connect

    Schlenger, B.J.; Dunn, P.F.

    1985-01-01

    A series of four experiments is being conducted at Argonne National Laboratory's TREAT Reactor. They have been designed to provide some of the necessary data regarding magnitude and release rates of fission products from degraded fuel pins, physical and chemical characteristics of released fission products, and aerosol formation and transport phenomena. These are in-pile experiments, whereby the test fuel is heated by neutron induced fission and subsequent clad oxidation in steam environments that simulate as closely as practical predicted reactor accident conditions. The test sequences cover a range of pressure and fuel heatup rate, and include the effect of Ag/In/Cd control rod material.

  8. Optical Pumping Experiments on Next Generation Light Sources

    SciTech Connect

    Moon, S J; Fournier, K B; Scott, H; Chung, H K; Lee, R W

    2004-07-29

    Laser-based plasma spectroscopic techniques have been used with great success to determine the line shapes of atomic transitions in plasmas, study the population kinetics of atomic systems embedded in plasmas, and look at the redistribution of radiation. However, the possibilities for optical lasers end for plasmas with n{sub e}>10{sup 22}cm{sup -3} as light propagation is severely altered by the plasma. The construction of the Tesla Test Facility(TTF) at DESY(Deutsche Elektronen-Synchrotron), a short pulse tunable free electron laser in the vacuum-ultraviolet and soft X-ray regime (VUV FEL), based on the SASE(self amplified spontaneous emission) process, will provide a major advance in the capability for dense plasma-related research. This source will provide 10{sup 13} photons in a 200 fs duration pulse that is tunable from {approx} 6nm to 100nm. Since an VUV FEL will not have the limitation associated with optical lasers the entire field of high density plasmas kinetics in laser produced plasma will then be available to study with tunable source. Thus, one will be able to use this and other FEL x-ray sources to pump individual transitions creating enhanced population in the excited states that can easily be monitored. We show two case studies illuminating different aspects of plasma spectroscopy.

  9. Microwave Oven Experiments with Metals and Light Sources

    ERIC Educational Resources Information Center

    Vollmer, Michael; Mollmann, Klaus-Peter; Karstadt, Detlef

    2004-01-01

    "Don't put metal objects in the microwave" is common safety advice. But why? Here we describe demonstration experiments involving placing household metallic objects in a microwave oven. These allow a better understanding of the interaction of microwaves with materials. Light bulbs and discharge lamps can also be used in instructive demonstrations.

  10. Advanced photon source experience with vacuum chambers for insertion devices

    SciTech Connect

    Hartog, P.D.; Grimmer, J.; Xu, S.; Trakhtenberg, E.; Wiemerslage, G.

    1997-08-01

    During the last five years, a new approach to the design and fabrication of extruded aluminum vacuum chambers for insertion devices was developed at the Advanced Photon Source (APS). With this approach, three different versions of the vacuum chamber, with vertical apertures of 12 mm, 8 mm, and 5 mm, were manufactured and tested. Twenty chambers were installed into the APS vacuum system. All have operated with beam, and 16 have been coupled with insertion devices. Two different vacuum chambers with vertical apertures of 16 mm and 11 mm were developed for the BESSY-II storage ring and 3 of 16 mm chambers were manufactured.

  11. Advanced Light Source Activity Report 1997/1998

    SciTech Connect

    Greiner, Annette

    1999-03-01

    This Lawrence Berkeley National Laboratory, Advanced Light Source (ALS) activity report for 1997/98 discusses the following topics: Introduction and Overview; Science Highlights; Facility Report; Special Events; ALS Advisory Panels 1997/98; ALS Staff 1997/98 and Facts and Figures for the year.

  12. Design of a laboratory for experiments with a pulsed neutron source.

    PubMed

    Memoli, G; Trusler, J P M; Ziver, A K

    2009-06-01

    We present the results of a neutron shielding design and optimisation study performed to reduce the exposure to radiological doses arising from a 14 MeV pulsed neutron generator (PNG) having a maximum emission strength of 2.0 x 10(8) neutrons s(-1). The source was intended to be used in a new irradiation facility for the realisation of an experiment on acoustical cavitation in liquids. This paper describes in detail how the facility was designed to reduce both neutron and gamma-ray dose rates to acceptable levels, taking into account the ALARP principle in following the steps of optimisation. In particular, this work compares two different methods of optimisation to assess neutron dose rates: the use of analytical methods and the use of Monte Carlo simulations (MCNPX 2.4). The activation of the surrounding materials during operation was estimated using the neutron spectra as input to the FISPACT 3.0 code. The limitations of a first-order analytical model to determine the neutron activation levels are highlighted. The impact that activation has on the choice of the materials to be used inside the laboratory and on the waiting time before anyone can safely enter the room after the neutron source is switched off is also discussed. PMID:19454793

  13. Celebrating the Earth: Stories, Experiences, and Activities.

    ERIC Educational Resources Information Center

    Livo, Norma J.

    Young learners are invited to learn about the natural world through engaging activities that encourage the observation, exploration, and appreciation of nature. Weaving together a stimulating tapestry of folktales, personal narratives, and hands-on activities, this book teaches children about the earth and all of its creatures--birds, plants,…

  14. Inducing in situ, nonlinear soil response applying an active source

    USGS Publications Warehouse

    Johnson, P.A.; Bodin, P.; Gomberg, J.; Pearce, F.; Lawrence, Z.; Menq, F.-Y.

    2009-01-01

    [1] It is well known that soil sites have a profound effect on ground motion during large earthquakes. The complex structure of soil deposits and the highly nonlinear constitutive behavior of soils largely control nonlinear site response at soil sites. Measurements of nonlinear soil response under natural conditions are critical to advancing our understanding of soil behavior during earthquakes. Many factors limit the use of earthquake observations to estimate nonlinear site response such that quantitative characterization of nonlinear behavior relies almost exclusively on laboratory experiments and modeling of wave propagation. Here we introduce a new method for in situ characterization of the nonlinear behavior of a natural soil formation using measurements obtained immediately adjacent to a large vibrator source. To our knowledge, we are the first group to propose and test such an approach. Employing a large, surface vibrator as a source, we measure the nonlinear behavior of the soil by incrementally increasing the source amplitude over a range of frequencies and monitoring changes in the output spectra. We apply a homodyne algorithm for measuring spectral amplitudes, which provides robust signal-to-noise ratios at the frequencies of interest. Spectral ratios are computed between the receivers and the source as well as receiver pairs located in an array adjacent to the source, providing the means to separate source and near-source nonlinearity from pervasive nonlinearity in the soil column. We find clear evidence of nonlinearity in significant decreases in the frequency of peak spectral ratios, corresponding to material softening with amplitude, observed across the array as the source amplitude is increased. The observed peak shifts are consistent with laboratory measurements of soil nonlinearity. Our results provide constraints for future numerical modeling studies of strong ground motion during earthquakes.

  15. Integrated Verification Experiment data collected as part of the Los Alamos National Laboratory's Source Region Program

    SciTech Connect

    Whitaker, R.W.; Noel, S.D.

    1992-12-01

    The summary report by Tom Weaver gives the overall background for the series of IVE (Integrated Verification Experiment) experiments including information on the full set of measurements made. This appendix presents details of the infrasound data for the and discusses certain aspects of a few special experiments. Prior to FY90, the emphasis of the Infrasound Program was on underground nuclear test (UGT) detection and yield estimation. During this time the Infrasound Program was a separate program at Los Alamos, and it was suggested to DOE/OAC that a regional infrasound network be established around NTS. The IVE experiments took place in a time frame that allowed simultaneous testing of possible network sites and examination of propagation in different directions. Whenever possible, infrasound stations were combined with seismic stations so that a large number could be efficiently fielded. The regional infrasound network was not pursued by DOE, as world events began to change the direction of verification toward non-proliferation. Starting in FY90 the infrasound activity became part of the Source Region Program which has a goal of understanding how energy is transported from the UGT to a variety of measurement locations.

  16. Versatile cold atom source for multi-species experiments

    NASA Astrophysics Data System (ADS)

    Paris-Mandoki, A.; Jones, M. D.; Nute, J.; Wu, J.; Warriar, S.; Hackermüller, L.

    2014-11-01

    We present a dual-species oven and Zeeman slower setup capable of producing slow, high-flux atomic beams for loading magneto-optical traps. Our compact and versatile system is based on electronic switching between different magnetic field profiles and is applicable to a wide range of multi-species experiments. We give details of the vacuum setup, coils, and simple electronic circuitry. In addition, we demonstrate the performance of our system by optimized, sequential loading of magneto-optical traps of lithium-6 and cesium-133.

  17. Versatile cold atom source for multi-species experiments

    SciTech Connect

    Paris-Mandoki, A.; Jones, M. D.; Nute, J.; Warriar, S.; Hackermüller, L.; Wu, J.

    2014-11-15

    We present a dual-species oven and Zeeman slower setup capable of producing slow, high-flux atomic beams for loading magneto-optical traps. Our compact and versatile system is based on electronic switching between different magnetic field profiles and is applicable to a wide range of multi-species experiments. We give details of the vacuum setup, coils, and simple electronic circuitry. In addition, we demonstrate the performance of our system by optimized, sequential loading of magneto-optical traps of lithium-6 and cesium-133.

  18. Public health genetic counselors: activities, skills, and sources of learning.

    PubMed

    McWalter, Kirsty M; Sdano, Mallory R; Dave, Gaurav; Powell, Karen P; Callanan, Nancy

    2015-06-01

    Specialization within genetic counseling is apparent, with 29 primary specialties listed in the National Society of Genetic Counselors' 2012 Professional Status Survey (PSS). PSS results show a steady proportion of genetic counselors primarily involved in public health, yet do not identify all those performing public health activities. Little is known about the skills needed to perform activities outside of "traditional" genetic counselor roles and the expertise needed to execute those skills. This study aimed to identify genetic counselors engaging in public health activities, the skills used, and the most influential sources of learning for those skills. Participants (N = 155) reported involvement in several public health categories: (a) Education of Public and/or Health Care Providers (n = 80, 52 %), (b) Population-Based Screening Programs (n = 70, 45 %), (c) Lobbying/Public Policy (n = 62, 40 %), (d) Public Health Related Research (n = 47, 30 %), and (e) State Chronic Disease Programs (n = 12, 8 %). Regardless of category, "on the job" was the most common primary source of learning. Genetic counseling training program was the most common secondary source of learning. Results indicate that the number of genetic counselors performing public health activities is likely higher than PSS reports, and that those who may not consider themselves "public health genetic counselors" do participate in public health activities. Genetic counselors learn a diverse skill set in their training programs; some skills are directly applicable to public health genetics, while other public health skills require additional training and/or knowledge. PMID:25475919

  19. The COHERENT Experiment at the Spallation Neutron Source

    SciTech Connect

    Elliott, Steven Ray

    2015-09-30

    The COHERENT collaboration's primary objective is to measure coherent elastic neutrino- nucleus scattering (CEvNS) using the unique, high-quality source of tens-of-MeV neutrinos provided by the Spallation Neutron Source (SNS) at Oak Ridge National Laboratory (ORNL). In spite of its large cross section, the CEvNS process has never been observed, due to tiny energies of the resulting nuclear recoils which are out of reach for standard neutrino detectors. The measurement of CEvNS has now become feasible, thanks to the development of ultra-sensitive technology for rare decay and weakly-interacting massive particle (dark matter) searches. The CEvNS cross section is cleanly predicted in the standard model; hence its measurement provides a standard model test. It is relevant for supernova physics and supernova-neutrino detection, and enables validation of dark-matter detector background and detector-response models. In the long term, precision measurement of CEvNS will address questions of nuclear structure. COHERENT will deploy multiple detector technologies in a phased approach: a 14-kg CsI[Na] scintillating crystal, 15 kg of p-type point-contact germanium detectors, and 100 kg of liquid xenon in a two-phase time projection chamber. Following an extensive background measurement campaign, a location in the SNS basement has proven to be neutron-quiet and suitable for deployment of the COHERENT detector suite. The simultaneous deployment of the three COHERENT detector subsystems will test the N=2 dependence of the cross section and ensure an unambiguous discovery of CEvNS. This document describes concisely the COHERENT physics motivations, sensitivity and plans for measurements at the SNS to be accomplished on a four-year timescale.

  20. Sources of the solar wind at solar activity maximum

    NASA Astrophysics Data System (ADS)

    Neugebauer, M.; Liewer, P. C.; Smith, E. J.; Skoug, R. M.; Zurbuchen, T. H.

    2002-12-01

    The photospheric sources of solar wind observed by the Ulysses and ACE spacecraft from 1998 to early 2001 are determined through a two-step mapping process. Solar wind speed measured at the spacecraft is used in a ballistic model to determine a foot point on a source surface at a solar distance of 2.5 solar radii. A potential-field source-surface model is then used to trace the field and flow from the source surface to the photosphere. Comparison of the polarity of the measured interplanetary field with the polarity of the photospheric source region shows good agreement for spacecraft latitudes equatorward of 60°. At higher southern latitudes, the mapping predicts that Ulysses should have observed only outward directed magnetic fields, whereas both polarities were observed. A detailed analysis is performed on four of the solar rotations for which the mapped and observed polarities were in generally good agreement. For those rotations, the solar wind mapped to both coronal holes and active regions. These findings for a period of high solar activity differ from the findings of a similar study of the solar wind in 1994-1995 when solar activity was very low. At solar minimum the fastest wind mapped to the interior of large polar coronal holes while slower wind mapped to the boundaries of those holes or to smaller low-latitude coronal holes. For the data examined in the present study, neither spacecraft detected wind from the small polar coronal holes when they existed and the speed was never as high as that observed by Ulysses at solar minimum. The principal difference between the solar wind from coronal holes and from active regions is that the O7+/O6+ ion ratio is lower for the coronal hole flow, but not as low as in the polar coronal hole flow at solar minimum. Furthermore, the active-region flows appear to be organized into several substreams unlike the more monolithic structure of flows from coronal holes. The boundaries between plasma flows from neighboring

  1. Bunch cleaning strategies and experiments at the Advanced Photon Source.

    SciTech Connect

    Sereno, N. S.

    1999-04-15

    The Advanced Photon Source (APS) design incorporated a positron accumulator ring (PAR) as part of the injector chain. In order to increase reliability and accommodate other uses of the injector, APS will run with electrons, eliminating the need for the PAR, provided another method of eliminating rf bucket pollution in the APS is found. Satellite bunches captured from an up to 30-ns-long beam from the linac need to be removed in the injector synchrotron and storage ring. The bunch cleaning method considered here relies on driving a stripline kicker with an amplitude modulated (AM) carrier signal where the carrier is at a revolution harmonic sideband corresponding to the vertical tune. The envelope waveform is phased so that all bunches except a single target bunch (eventually to be injected into the storage ring) are resonated vertically into a scraper. The kicker is designed with a large enough shunt impedance to remove satellite bunches from the injection energy of 0.4 GeV up to 1 GeV. Satellite bunch removal in the storage ring relies on the single bunch current tune shift resulting from the machine impedance. Small bunches remaining after initial preparation in the synchrotron may be removed by driving the beam vertically into a scraper using a stripline kicker operating at a sideband corresponding to the vertical tune for small current bunches. In this paper both design specifications and bunch purity measurements are reported for both the injector synchrotron and storage ring.

  2. Imaging the magmatic system of Newberry Volcano using Joint active source and teleseismic tomography

    NASA Astrophysics Data System (ADS)

    Heath, Benjamin A.; Hooft, Emilie E. E.; Toomey, Douglas R.; Bezada, Maximiliano J.

    2015-12-01

    In this paper, we combine active and passive source P wave seismic data to tomographically image the magmatic system beneath Newberry Volcano, located east of the Cascade arc. By using both travel times from local active sources and delay times from teleseismic earthquakes recorded on closely spaced seismometers (300-800 m), we significantly improve recovery of upper crustal velocity structure (<10 km depth). The tomographic model reveals a low-velocity feature between 3 and 5 km depth that lies beneath the caldera, consistent with a magma body. In contrast to earlier tomographic studies, where elevated temperatures were sufficient to explain the recovered low velocities, the larger amplitude low-velocity anomalies in our joint tomography model require low degrees of partial melt (˜10%), and a minimum melt volume of ˜2.5 km3. Furthermore, synthetic tests suggest that even greater magnitude low-velocity anomalies, and by inference larger volumes of magma (up to 8 km3), are needed to explain the observed waveform variability. The lateral extent and shape of the inferred magma body indicates that the extensional tectonic regime at Newberry influences the emplacement of magmatic intrusions. Our study shows that jointly inverting active source and passive source seismic data improves tomographic imaging of the shallow crustal seismic structure of volcanic systems and that active source experiments would benefit from longer deployment times to also record teleseismic sources.

  3. Intense antineutrino source based on a lithium converter. Proposal for a promising experiment for studying oscillations

    NASA Astrophysics Data System (ADS)

    Lyashuk, V. I.; Lutostansky, Yu. S.

    2016-03-01

    An intense electron-antineutrino source with a hard spectrum (E_{{{tilde v}_e}}^{max} = 13 MeV and < {{E_{{{tilde v}_e}}}} rangle = 6.5MeV) can be created on the basis of the short-lived isotope 8Li (β--decay, T 1/2 = 0.84 s) formed via the ( n, γ) activation of 7Li. In contrast to a reactor antineutrino spectrum whose uncertainty is large, particularly in the high-energy region {E_{{{tilde v}_e}}} > 6 MeV, which is experimentally relevant, the lithium {tilde v_e} spectrum is accurately determined. The proposed accelerator-driven experimental scheme with a neutron-producing target and a lithium converter as an intense {tilde v_e} source is an alternative to a nuclear reactor. The required amount of high-purity 7Li will be reduced in many times by using the suggested heavy-water LiOD solutions. A possible experiment involving the lithium source on search for sterile neutrinos in the mass region Δ m 2 ≥ 0.2 eV2 with a very high sensitivity to mixing-angle values down to sin2(2Θ) ≈ (7-10) × 10-4 at the 95% C.L. has been considered.

  4. Biochemical assays on plasminogen activators and hormones from kidney sources

    NASA Technical Reports Server (NTRS)

    Barlow, Grant H.; Lewis, Marian L.; Morrison, Dennis R.

    1988-01-01

    Investigations were established for the purpose of analyzing the conditioned media from human embryonic kidney cell subpopulations separated in space by electrophoresis. This data is based on the experiments performed on STS-8 on the continuous flow electrophoresis system. The primary biological activity that was analyzed was plasminogen activator activity, but some assays for erythropoeitin and human granulocyte colony stimulating activity were also performed. It is concluded that a battery of assays are required to completely define the plasminogen activator profile of a conditioned media from cell culture. Each type of assay measures different parts of the mixture and are influenced by different parameters. The functional role of each assay is given along with an indication of which combination of assays are required to answer specific questions. With this type of information it is possible by combinations of assays with mathematical analysis to pinpoint a specific component of the system.

  5. Numerical simulation of the geographical sources of water for Continental Scale Experiments (CSEs) Precipitation

    NASA Technical Reports Server (NTRS)

    Bosilovich, Michael G.; Sud, Yogesh; Schubert, Siegfried D.; Walker, Gregory K.

    2003-01-01

    There are several important research questions that the Global Energy and Water Cycle Experiment (GEWEX) is actively pursuing, namely: What is the intensity of the water cycle and how does it change? And what is the sustainability of water resources? Much of the research to address these questions is directed at understanding the atmospheric water cycle. In this paper, we have used a new diagnostic tool, called Water Vapor Tracers (WVTs), to quantify the how much precipitation originated as continental or oceanic evaporation. This shows how long water can remain in the atmosphere and how far it can travel. The model-simulated data are analyzed over regions of interest to the GEWEX community, specifically, their Continental Scale Experiments (CSEs) that are in place in the United States, Europe, Asia, Brazil, Africa and Canada. The paper presents quantitative data on how much each continent and ocean on Earth supplies water for each CSE. Furthermore, the analysis also shows the seasonal variation of the water sources. For example, in the United States, summertime precipitation is dominated by continental (land surface) sources of water, while wintertime precipitation is dominated by the Pacific Ocean sources of water. We also analyze the residence time of water in the atmosphere. The new diagnostic shows a longer residence time for water (9.2 days) than more traditional estimates (7.5 days). We emphasize that the results are based on model simulations and they depend on the model s veracity. However, there are many potential uses for the new diagnostic tool in understanding weather processes and large and small scales.

  6. Sources of solar wind over the solar activity cycle.

    PubMed

    Poletto, Giannina

    2013-05-01

    Fast solar wind has been recognized, about 40 years ago, to originate in polar coronal holes (CHs), that, since then, have been identified with sources of recurrent high speed wind streams. As of today, however, there is no general consensus about whether there are, within CHs, preferential locations where the solar wind is accelerated. Knowledge of slow wind sources is far from complete as well. Slow wind observed in situ can be traced back to its solar source by backward extrapolation of magnetic fields whose field lines are streamlines of the outflowing plasma. However, this technique often has not the necessary precision for an indisputable identification of the region where wind originates. As the Sun progresses through its activity cycle, different wind sources prevail and contribute to filling the heliosphere. Our present knowledge of different wind sources is here summarized. Also, a Section addresses the problem of wind acceleration in the low corona, as inferred from an analysis of UV data, and illustrates changes between fast and slow wind profiles and possible signatures of changes along the solar cycle. A brief reference to recent work about the deep roots of solar wind and their changes over different solar cycles concludes the review. PMID:25685421

  7. Electrode activation in cesium-free negative ion sources

    SciTech Connect

    Dudnikov, Vadim; Johnson, Rolland P.

    2010-02-15

    Features of emission electrode activation leading to enhancement of negative ion emission in cesium-free discharges are discussed. In some ion sources with cesium-free discharges, the emission of negative ions has been increased significantly by emission electrode activation using strong heating of the negative biased electrode by discharge plasma. A simple explanation of this enhancement is that it is due to an accumulation on the emission surface of the plasma electrode of impurities with low ionization potential that decreases in surface work function and increases the secondary emission of negative ions similar to ''Cesiation.'' The negative biasing of emission surface is important for accumulation and trapping the impurities on the emission surface. To effectively control the activation process it is important to directly detect the evolution of the work function and the impurity concentration during electrode activation with enhancement of negative ion emission.

  8. The effect of light-activation sources on tooth bleaching

    PubMed Central

    Baroudi, Kusai; Hassan, Nadia Aly

    2014-01-01

    Vital bleaching is one of the most requested cosmetic dental procedures asked by patients who seek a more pleasing smile. This procedure consists of carbamide or hydrogen peroxide gel applications that can be applied in-office or by the patient (at-home/overnight bleaching system). Some in-office treatments utilise whitening light with the objective of speeding up the whitening process. The objective of this article is to review and summarise the current literature with regard to the effect of light-activation sources on in-office tooth bleaching. A literature search was conducted using Medline, accessed via the National Library of Medicine Pub Med from 2003 to 2013 searching for articles relating to effectiveness of light activation sources on in-office tooth bleaching. This study found conflicting evidence on whether light truly improve tooth whitening. Other factors such as, type of stain, initial tooth colour and subject age which can influence tooth bleaching outcome were discussed. Conclusions: The use of light activator sources with in-office bleaching treatment of vital teeth did not increase the efficacy of bleaching or accelerate the bleaching. PMID:25298598

  9. Brain activity underlying encoding and retrieval of source memory.

    PubMed

    Cansino, Selene; Maquet, Pierre; Dolan, Raymond J; Rugg, Michael D

    2002-10-01

    Neural activity elicited during the encoding and retrieval of source information was investigated with event-related functional magnetic resonance imaging (efMRI). During encoding, 17 subjects performed a natural/artificial judgement on pictures of common objects which were presented randomly in one of the four quadrants of the display. At retrieval, old pictures were mixed with new ones and subjects judged whether each picture was new or old and, if old, indicated in which quadrant it was presented at encoding. During encoding, study items that were later recognized and assigned a correct source judgement elicited greater activity than recognized items given incorrect judgements in a variety of regions, including right lateral occipital and left prefrontal cortex. At retrieval, regions showing greater activity for recognized items given correct versus incorrect source judgements included the right hippocampal formation and the left prefrontal cortex. These findings indicate a role for these regions in the encoding and retrieval of episodic information beyond that required for simple item recognition. PMID:12217968

  10. Patient Activation and Mental Health Care Experiences Among Women Veterans.

    PubMed

    Kimerling, Rachel; Pavao, Joanne; Wong, Ava

    2016-07-01

    We utilized a nationally representative survey of women veteran primary care users to examine associations between patient activation and mental health care experiences. A dose-response relationship was observed, with odds of high quality ratings significantly greater at each successive level of patient activation. Higher activation levels were also significantly associated with preference concordant care for gender-related preferences (use of female providers, women-only settings, and women-only groups as often as desired). Results add to the growing literature documenting better health care experiences among more activated patients, and suggest that patient activation may play an important role in promoting engagement with mental health care. PMID:25917224

  11. Patient Activation and Mental Health Care Experiences Among Women Veterans

    PubMed Central

    Pavao, Joanne; Wong, Ava

    2016-01-01

    We utilized a nationally representative survey of women veteran primary care users to examine associations between patient activation and mental health care experiences. A dose–response relationship was observed, with odds of high quality ratings significantly greater at each successive level of patient activation. Higher activation levels were also significantly associated with preference concordant care for gender-related preferences (use of female providers, women-only settings, and women-only groups as often as desired). Results add to the growing literature documenting better health care experiences among more activated patients, and suggest that patient activation may play an important role in promoting engagement with mental health care. PMID:25917224

  12. ANS hard X-ray experiment development program. [emission from X-ray sources

    NASA Technical Reports Server (NTRS)

    Parsignault, D.; Gursky, H.; Frank, R.; Kubierschky, K.; Austin, G.; Paganetti, R.; Bawdekar, V.

    1974-01-01

    The hard X-ray (HXX) experiment is one of three experiments included in the Dutch Astronomical Netherlands Satellite, which was launched into orbit on 30 August 1974. The overall objective of the HXX experiment is the detailed study of the emission from known X-ray sources over the energy range 1.5-30keV. The instrument is capable of the following measurements: (1) spectral content over the full energy range with an energy resolution of approximately 20% and time resolution down to 4 seconds; (2) source time variability down to 4 milliseconds; (3) silicon emission lines at 1.86 and 2.00keV; (4) source location to a limit of one arc minute in ecliptic latitude; and (5) spatial structure with angular resolution of the arc minutes. Scientific aspects of experiment, engineering design and implementation of the experiment, and program history are included.

  13. Active control of noise on the source side of a partition to increase its sound isolation

    NASA Astrophysics Data System (ADS)

    Tarabini, Marco; Roure, Alain; Pinhede, Cedric

    2009-03-01

    This paper describes a local active noise control system that virtually increases the sound isolation of a dividing wall by means of a secondary source array. With the proposed method, sound pressure on the source side of the partition is reduced using an array of loudspeakers that generates destructive interference on the wall surface, where an array of error microphones is placed. The reduction of sound pressure on the incident side of the wall is expected to decrease the sound radiated into the contiguous room. The method efficiency was experimentally verified by checking the insertion loss of the active noise control system; in order to investigate the possibility of using a large number of actuators, a decentralized FXLMS control algorithm was used. Active control performances and stability were tested with different array configurations, loudspeaker directivities and enclosure characteristics (sound source position and absorption coefficient). The influence of all these parameters was investigated with the factorial design of experiments. The main outcome of the experimental campaign was that the insertion loss produced by the secondary source array, in the 50-300 Hz frequency range, was close to 10 dB. In addition, the analysis of variance showed that the active noise control performance can be optimized with a proper choice of the directional characteristics of the secondary source and the distance between loudspeakers and error microphones.

  14. First experiments on neutron detection on the accelerator-based source for boron neutron capture therapy

    NASA Astrophysics Data System (ADS)

    Kuznetsov, A. S.; Malyshkin, G. N.; Makarov, A. N.; Sorokin, I. N.; Sulyaev, Yu. S.; Taskaev, S. Yu.

    2009-04-01

    A pilot accelerator-based source of epithermal neutrons, which is intended for wide application in clinics for boron neutron capture therapy, has been constructed at the Budker Institute of Nuclear Physics (Novosibirsk). A stationary proton beam has been obtained and near-threshold neutron generation regime has been realized. Results of the first experiments on neutron generation using the proposed source are described.

  15. Prevalent flucocorticoid and androgen activity in US water sources

    USGS Publications Warehouse

    Stavreva, Diana A.; George, Anuja A.; Klausmeyer, Paul; Varticovski, Lyuba; Sack, Daniel; Voss, Ty C.; Schiltz, R. Louis; Blazer, Vicki; Iwanowiczl, Luke R.; Hager, Gordon L.

    2012-01-01

    Contamination of the environment with endocrine disrupting chemicals (EDCs) is a major health concern. The presence of estrogenic compounds in water and their deleterious effect are well documented. However, detection and monitoring of other classes of EDCs is limited. Here we utilize a high-throughput live cell assay based on sub-cellular relocalization of GFP-tagged glucocorticoid and androgen receptors (GFP-GR and GFP-AR), in combination with gene transcription analysis, to screen for glucocorticoid and androgen activity in water samples. We report previously unrecognized glucocorticoid activity in 27%, and androgen activity in 35% of tested water sources from 14 states in the US. Steroids of both classes impact body development, metabolism, and interfere with reproductive, endocrine, and immune systems. This prevalent contamination could negatively affect wildlife and human populations.

  16. Prevalent Glucocorticoid and Androgen Activity in US Water Sources

    PubMed Central

    Stavreva, Diana A.; George, Anuja A.; Klausmeyer, Paul; Varticovski, Lyuba; Sack, Daniel; Voss, Ty C.; Schiltz, R. Louis; Blazer, Vicki S.; Iwanowicz, Luke R.; Hager, Gordon L.

    2012-01-01

    Contamination of the environment with endocrine disrupting chemicals (EDCs) is a major health concern. The presence of estrogenic compounds in water and their deleterious effect are well documented. However, detection and monitoring of other classes of EDCs is limited. Here we utilize a high-throughput live cell assay based on sub-cellular relocalization of GFP-tagged glucocorticoid and androgen receptors (GFP-GR and GFP-AR), in combination with gene transcription analysis, to screen for glucocorticoid and androgen activity in water samples. We report previously unrecognized glucocorticoid activity in 27%, and androgen activity in 35% of tested water sources from 14 states in the US. Steroids of both classes impact body development, metabolism, and interfere with reproductive, endocrine, and immune systems. This prevalent contamination could negatively affect wildlife and human populations. PMID:23226835

  17. Talker identification across source mechanisms: Experiments with laryngeal and electrolarynx speech

    PubMed Central

    Perrachione, Tyler K.; Stepp, Cara E.; Hillman, Robert E.; Wong, Patrick C.M.

    2015-01-01

    Purpose To determine listeners' ability to learn talker identity from speech produced with an electrolarynx, explore source and filter differentiation in talker identification, and describe acoustic-phonetic changes associated with electrolarynx use. Method Healthy adult control listeners learned to identify talkers from speech recordings produced using talkers' normal laryngeal vocal source or an electrolarynx. Listeners' abilities to identify talkers from the trained vocal source (Experiment 1) and generalize this knowledge to the untrained source (Experiment 2) were assessed. Acoustic-phonetic measurements of spectral differences between source mechanisms were performed. Additional listeners attempted to match recordings from different source mechanisms to a single talker (Experiment 3). Results Listeners successfully learned talker identity from electrolarynx speech, but less accurately than from laryngeal speech. Listeners were unable to generalize talker identity to the untrained source mechanism. Electrolarynx use resulted in vowels with higher F1 frequencies compared to laryngeal speech. Listeners matched recordings from different sources to a single talker better than chance. Conclusions Electrolarynx speech, though lacking individual differences in voice quality, nevertheless conveys sufficient indexical information related to the vocal filter and articulation for listeners to identify individual talkers. Psychologically, perception of talker identity arises from a “gestalt” of the vocal source and filter. PMID:24801962

  18. Quantitation of Lipase Activity from a Bee: An Introductory Enzyme Experiment.

    ERIC Educational Resources Information Center

    Farley, Kathleen A.; Jones, Marjorie A.

    1989-01-01

    This four-hour experiment uses a bee as a source of the enzyme which is reacted with a radioactive substrate to determine the specific activity of the enzyme. Uses thin layer chromatography, visible spectrophotometry, and liquid scintillation spectrometry (if not available a Geiger-Muller counter can be substituted). (MVL)

  19. The Effects of Primary Sources and Field Trip Experience on the Knowledge Retention of Multicultural Content

    ERIC Educational Resources Information Center

    Farmer, James; Knapp, Doug; Benton, Gregory M.

    2007-01-01

    Although small in scope, this study attempted to analyze the impacts of primary sources and field trip experiences on multicultural education through first-hand narrative interviews, one year after the experience. In particular, it assessed the recollections of students who participated in a one-half-day field trip to George Washington Carver…

  20. Hollow cathode plasma source for active spacecraft charge control

    NASA Technical Reports Server (NTRS)

    Deininger, William D.; Aston, Graeme; Pless, Lewis C.

    1987-01-01

    A prototype plasma source spacecraft discharge device has been developed to control overall and differential spacecraft surface charging. The plasma source is based on a unique hollow cathode discharge, where the plasma generation process is contained completely within the cathode. This device can be operated on argon, krypton, or xenon and has a rapid cold start time of less than 4 s. The discharge system design includes a spacecraft-discharge/net-charge sensing circuit which provides the ability to measure the polarity, magnitude, pulse shape, and time duration of a discharging event. Ion currents of up to 325 microA and electron currents ranging from 0.02 to 6.0 A have been extracted from the device. In addition, the spacecraft discharge device successfully discharged capacitively biased plates, from as high as + or - 2500 V, to ground potential, and discharged and clamped actively biased plates at +5 V with respect to ground potential during ground simulation testing.

  1. Pore-space alteration in source rock (shales) during hydrocarbons generation: laboratory experiment

    NASA Astrophysics Data System (ADS)

    Giliazetdinova, D. R.; Korost, D. V.; Nadezhkin, D. V.

    2013-12-01

    Hydrocarbons (HC) are generated from solid organic matter (kerogen) due to thermocatalytic reactions. The rate of such reactions shows direct correlation with temperature and depends on the depth of source rock burial. Burial of sedimentary rock is also inevitably accompanied by its structural alteration owing to compaction, dehydration and re-crystallization. Processes of HC generation, primary migration and structural changes are inaccessible for direct observation in nature, but they can be studied in laboratory experiments. Experiment was carried out with a clayey-carbonate rock sample of the Domanik Horizon taken from boreholes drilled in the northeastern part of the south Tatar arch. The rock chosen fits the very essential requirements - high organic matter content and its low metamorphic grade. Our work aimed at laboratory modeling of HC generation in an undisturbed rock sample by its heating in nitrogen atmosphere based on a specified temperature regime and monitoring alterations in the pore space structure. Observations were carried out with a SkyScan-1172 X-ray microtomography scanner (resulting scan resolution of 1 μm). A cylinder, 44 mm in diameter, was prepared from the rock sample for the pyrolitic and microtomographic analyses. Scanning procedures were carried out in 5 runs. Temperature interval for each run had to match the most important stage of HC generation in the source rock, namely: (1) original structure; (2) 100-300°C - discharge of free and adsorbed HC and water; (3) 300-400°C - initial stage of HC formation owing to high-temperature pyrolysis of the solid organic matter and discharge of the chemically bound water; (4) 400-470°C - temperature interval fitting the most intense stage of HC formation; (5) 470-510°C - final stage of HC formation. Maximum sample heating in the experiment was determined as temperature of the onset of active decomposition of carbonates, i.e., in essence, irreversible metamorphism of the rock. Additional

  2. Using Microcomputers in the Physical Chemistry Laboratory: Activation Energy Experiment.

    ERIC Educational Resources Information Center

    Touvelle, Michele; Venugopalan, Mundiyath

    1986-01-01

    Describes a computer program, "Activation Energy," which is designed for use in physical chemistry classes and can be modified for kinetic experiments. Provides suggestions for instruction, sample program listings, and information on the availability of the program package. (ML)

  3. Note: A versatile radio-frequency source for cold atom experiments.

    PubMed

    Li, Na; Wu, Yu-Ping; Min, Hao; Yang, Tao; Jiang, Xiao

    2016-08-01

    A radio-frequency (RF) source designed for cold atom experiments is presented. The source uses AD9858, a direct digital synthesizer, to generate the sine wave directly, up to 400 MHz, with sub-Hz resolution. An amplitude control circuit consisting of wideband variable gain amplifier and high speed digital to analog converter is integrated into the source, capable of 70 dB off isolation and 4 ns on-off keying. A field programmable gate array is used to implement a versatile frequency and amplitude co-sweep logic. Owing to modular design, the RF sources have been used on many cold atom experiments to generate various complicated RF sequences, enriching the operation schemes of cold atoms, which cannot be done by standard RF source instruments. PMID:27587180

  4. Advisory Committee on human radiation experiments. Final report, Supplemental Volume 2. Sources and documentation

    SciTech Connect

    1995-01-01

    This volume and its appendixes supplement the Advisory Committee`s final report by reporting how we went about looking for information concerning human radiation experiments and intentional releases, a description of what we found and where we found it, and a finding aid for the information that we collected. This volume begins with an overview of federal records, including general descriptions of the types of records that have been useful and how the federal government handles these records. This is followed by an agency-by-agency account of the discovery process and descriptions of the records reviewed, together with instructions on how to obtain further information from those agencies. There is also a description of other sources of information that have been important, including institutional records, print resources, and nonprint media and interviews. The third part contains brief accounts of ACHRE`s two major contemporary survey projects (these are described in greater detail in the final report and another supplemental volume) and other research activities. The final section describes how the ACHRE information-nation collections were managed and the records that ACHRE created in the course of its work; this constitutes a general finding aid for the materials deposited with the National Archives. The appendices provide brief references to federal records reviewed, descriptions of the accessions that comprise the ACHRE Research Document Collection, and descriptions of the documents selected for individual treatment. Also included are an account of the documentation available for ACHRE meetings, brief abstracts of the almost 4,000 experiments individually described by ACHRE staff, a full bibliography of secondary sources used, and other information.

  5. A visiting scientist program for the burst and transient source experiment

    NASA Technical Reports Server (NTRS)

    Kerr, Frank J.

    1995-01-01

    During this project, Universities Space Research Association provided program management and the administration for overseeing the performance of the total contractual effort. The program director and administrative staff provided the expertise and experience needed to efficiently manage the program.USRA provided a program coordinator and v visiting scientists to perform scientific research with Burst and Transient Source Experiment (BATSE) data. This research was associated with the primary scientific objectives of BATSE and with the various BATSE collaborations which were formed in response to the Compton Gamma Ray Observatory Guest Investigator Program. USRA provided administration for workshops, colloquia, the preparation of scientific documentation, etc. and also provided flexible program support in order to meet the on-going needs of MSFC's BATSE program. USRA performed tasks associated with the recovery, archiving, and processing of scientific data from BATSE. A bibliography of research in the astrophysics discipline is attached as Appendix 1. Visiting Scientists and Research Associates performed activities on this project, and their technical reports are attached as Appendix 2.

  6. Efficient localization of synchronous EEG source activities using a modified RAP-MUSIC algorithm.

    PubMed

    Liu, Hesheng; Schimpf, Paul H

    2006-04-01

    Synchronization across different brain regions is suggested to be a possible mechanism for functional integration. Noninvasive analysis of the synchronization among cortical areas is possible if the electrical sources can be estimated by solving the electroencephalography inverse problem. Among various inverse algorithms, spatio-temporal dipole fitting methods such as RAP-MUSIC and R-MUSIC have demonstrated superior ability in the localization of a restricted number of independent sources, and also have the ability to reliably reproduce temporal waveforms. However, these algorithms experience difficulty in reconstructing multiple correlated sources. Accurate reconstruction of correlated brain activities is critical in synchronization analysis. In this study, we modified the well-known inverse algorithm RAP-MUSIC to a multistage process which analyzes the correlation of candidate sources and searches for independent topographies (ITs) among precorrelated groups. Comparative studies were carried out on both simulated data and clinical seizure data. The results demonstrated superior performance with the modified algorithm compared to the original RAP-MUSIC in recovering synchronous sources and localizing the epileptiform activity. The modified RAP-MUSIC algorithm, thus, has potential in neurological applications involving significant synchronous brain activities. PMID:16602571

  7. Report on Active and Planned Spacecraft and Experiments

    NASA Technical Reports Server (NTRS)

    Vostreys, R. W. (Editor); Maitson, H. H. (Editor)

    1981-01-01

    Active and planned spacecraft activity and experiments between June 1, 1980 and May 31, 1981 known to the National Space Science Data Center are described. The information covers a wide range of disciplines: astronomy, Earth sciences, meteorology, planetary sciences, aeronomy, particles and fields, solar physics, life sciences, and material sciences. Each spacecraft and experiment is described and its current status presented. Descriptions of navigational and communications satellites and of spacecraft that contain only continuous radio beacons used for ionospheric studies are specifically excluded.

  8. Verification of Minimum Detectable Activity for Radiological Threat Source Search

    NASA Astrophysics Data System (ADS)

    Gardiner, Hannah; Myjak, Mitchell; Baciak, James; Detwiler, Rebecca; Seifert, Carolyn

    2015-10-01

    The Department of Homeland Security's Domestic Nuclear Detection Office is working to develop advanced technologies that will improve the ability to detect, localize, and identify radiological and nuclear sources from airborne platforms. The Airborne Radiological Enhanced-sensor System (ARES) program is developing advanced data fusion algorithms for analyzing data from a helicopter-mounted radiation detector. This detector platform provides a rapid, wide-area assessment of radiological conditions at ground level. The NSCRAD (Nuisance-rejection Spectral Comparison Ratios for Anomaly Detection) algorithm was developed to distinguish low-count sources of interest from benign naturally occurring radiation and irrelevant nuisance sources. It uses a number of broad, overlapping regions of interest to statistically compare each newly measured spectrum with the current estimate for the background to identify anomalies. We recently developed a method to estimate the minimum detectable activity (MDA) of NSCRAD in real time. We present this method here and report on the MDA verification using both laboratory measurements and simulated injects on measured backgrounds at or near the detection limits. This work is supported by the US Department of Homeland Security, Domestic Nuclear Detection Office, under competitively awarded contract/IAA HSHQDC-12-X-00376. This support does not constitute an express or implied endorsement on the part of the Gov't.

  9. Measuring Active-Sterile Neutrino Oscillations with a Stopped Pion Neutrino Source

    NASA Astrophysics Data System (ADS)

    van de Water, Richard; Louis, Bill; Mills, Geoff

    2007-04-01

    The question of the existence of light sterile neutrinos is of great interest in many areas of particle physics, astrophysics, and cosmology. Furthermore, should the MiniBooNE experiment at Fermilab confirm the LSND oscillation signal, then new measurements are required to identify the mechanism responsible for these oscillations. Possibilities include sterile neutrinos, CP or CPT violation, variable mass neutrinos, and Lorentz violation. Here we consider an experiment at a stopped pion neutrino source (the Spallation Neutron Source at ORNL) to determine if active-sterile neutrino oscillations with δm ^2 greater than 0.1 eV^2 can account for the signal. By exploiting stopped +circ decay to produce a monoenergetic νμ source, and measuring the rate of the neutral current reaction νx0.05in ^12C ->νx0.05in ^12C^*(15.11) as a function of distance from the source, we show that a convincing test for active-sterile neutrino oscillations can be performed.

  10. Possibility of weather and climate change by active experiments

    NASA Astrophysics Data System (ADS)

    Avakyan, Sergey; Voronin, Nikolai; Troitsky, Arkadil; Chernouss, Sergey

    ). Application of the optical recording channel in active experiments (i.e., at a fixed space-time artificial ionospheric disturbances) allow: - to confirm experimentally the Rydberg channel of generating microwave fluxes from the ionosphere at its perturbations; - to offer remote monitoring as international control of sources of artificial influence on weather and climatic characteristics.

  11. Experience API: Flexible, Decentralized and Activity-Centric Data Collection

    ERIC Educational Resources Information Center

    Kevan, Jonathan M.; Ryan, Paul R.

    2016-01-01

    This emerging technology report describes the Experience API (xAPI), a new e-learning specification designed to support the learning community in standardizing and collecting both formal and informal distributed learning activities. Informed by Activity Theory, a framework aligned with constructivism, data is collected in the form of activity…

  12. Subliminal psychodynamic activation: methodological problems and questions in Silverman's experiments.

    PubMed

    Fudin, R

    1999-08-01

    Analyses of procedures in Lloyd H. Silverman's subliminal psychodynamic activation experiments identify problems and questions. Given the information provided, none of his experiments can be replicated, and none of his positive results were found under luminance conditions he reckoned in 1983 were typical of such outcomes. Furthermore, there is no evidence in any of his experiments that all stimuli were presented completely within the fovea, a condition critical to the production of positive findings (Silverman & Geisler, 1986). These considerations and the fact that no experiment using Silverman's procedures can yield unambiguous positive results (Fudin, 1986) underscore the need to start anew research in this area. Such research should be undertaken with a greater appreciation of methodological issues involved in exposing and encoding subliminal stimuli than that found in all but a few experiments on subliminal psychodynamic activation. PMID:10544424

  13. Activity Coefficients of Acetone-Chloroform Solutions: An Undergraduate Experiment. Undergraduate Experiment.

    ERIC Educational Resources Information Center

    Ozog, J. Z.; Morrison, J. A.

    1983-01-01

    Presents information, laboratory procedures, and results of an undergraduate experiment in which activity coefficients for a two-component liquid-vapor system are determined. Working in pairs, students can perform the experiment with 10 solutions in a given three-hour laboratory period. (Author/JN)

  14. Investigation of acoustic gravity waves created by anomalous heat sources: experiments and theoretical analysis

    NASA Astrophysics Data System (ADS)

    Pradipta, R.; Lee, M. C.

    2013-07-01

    We have been investigating high-power radio wave-induced acoustic gravity waves (AGWs) at Gakona, Alaska, using the High-frequency Active Aurora Research Program (HAARP) heating facility (i.e. HF heater) and extensive diagnostic instruments. This work was aimed at performing a controlled study of the space plasma turbulence triggered by the AGWs originating from anomalous heat sources, as observed in our earlier experiments at Arecibo, Puerto Rico (Pradipta 2007 MS Thesis MIT Press, Cambridge, MA). The HF heater operated in continuous wave (CW) O-mode can heat ionospheric plasmas effectively to yield a depleted magnetic flux tube as rising plasma bubbles (Lee et al 1998 Geophys. Res. Lett. 25 579). Two processes are responsible for the depletion of the magnetic flux tube: (i) thermal expansion and (ii) chemical reactions caused by heated ions. The depleted plasmas create large density gradients that can augment spread F processes via generalized Rayleigh-Taylor instabilities (Lee et al 1999 Geophys. Res. Lett. 26 37). It is thus expected that the temperature of neutral particles in the heated ionospheric region can be increased. Such a heat source in the neutral atmosphere may potentially generate AGWs in the form of traveling ionospheric plasma disturbances (TIPDs). We should point out that these TIPDs have features distinctively different from electric and magnetic field (ExB) drifts of HF wave-induced large-scale non-propagating plasma structures. Moreover, it was noted in our recent study of naturally occurring AGW-induced TIDs that only large-scale AGWs can propagate upward to reach higher altitudes. Thus, in our Gakona experiments we select optimum heating schemes for HF wave-induced AGWs that can be distinguished from the naturally occurring ones. The generation and propagation of AGWs are monitored by MUIR (Modular Ultra high-frequency Ionospheric Radar), Digisonde and GPS/low-earth-orbit satellites. Our theoretical and experimental studies have shown that

  15. Li{sup +} alumino-silicate ion source development for the neutralized drift compression experiment

    SciTech Connect

    Roy, Prabir K.; Greenway, Wayne G.; Kwan, Joe W.; Seidl, Peter A.; Waldron, William L.; Wu, James K.

    2011-01-15

    We report results on lithium alumino-silicate ion source development in preparation for warm dense matter heating experiments on the new neutralized drift compression experiment II. The practical limit to the current density for a lithium alumino-silicate source is determined by the maximum operating temperature that the ion source can withstand before running into problems of heat transfer, melting of the alumino-silicate material, and emission lifetime. Using small prototype emitters, at a temperature of {approx_equal}1275 deg. C, a space-charge limited Li{sup +} beam current density of J {approx_equal}1 mA/cm{sup 2} was obtained. The lifetime of the ion source was {approx_equal}50 h while pulsing at a rate of 0.033 Hz with a pulse duration of 5-6 {mu}s.

  16. Li+ alumino-silicate ion source development for the Neutralized Drift Compression Experiment (NDCX)

    SciTech Connect

    Roy, Prabir K.; Greenway, Wayne G.; Kwan, Joe W.; Seidl, Peter A.; Waldron, William L.; Wu, James K.

    2010-10-01

    We report results on lithium alumino-silicate ion source development in preparation for warmdense-matter heating experiments on the new Neutralized Drift Compression Experiment (NDCXII). The practical limit to the current density for a lithium alumino-silicate source is determined by the maximum operating temperature that the ion source can withstand before running into problems of heat transfer, melting of the alumino-silicate material, and emission lifetime. Using small prototype emitters, at a temperature of ~;;1275 oC, a space-charge-limited Li+ beam current density of J ~;;1 mA/cm2 was obtained. The lifetime of the ion source was ~;;50 hours while pulsing at a rate of 0.033 Hz with a pulse duration of 5-6 mu s.

  17. Source spectra of the first four Source Physics Experiments (SPE) explosions from the frequency-domain moment-tensor inversion

    DOE PAGESBeta

    Yang, Xiaoning

    2016-01-01

    In this study, I used seismic waveforms recorded within 2 km from the epicenter of the first four Source Physics Experiments (SPE) explosions to invert for the moment-tensor spectra of these explosions. I employed a one-dimensional (1D) Earth model for Green's function calculations. The model was developed from P- and Rg-wave travel times and amplitudes. I selected data for the inversion based on the criterion that they had consistent travel times and amplitude behavior as those predicted by the 1D model. Due to limited azimuthal coverage of the sources and the mostly vertical-component-only nature of the dataset, only long-period, volumetricmore » components of the moment-tensor spectra were well constrained.« less

  18. Source spectra of the first four Source Physics Experiments (SPE) explosions from the frequency-domain moment-tensor inversion

    SciTech Connect

    Yang, Xiaoning

    2016-01-01

    In this study, I used seismic waveforms recorded within 2 km from the epicenter of the first four Source Physics Experiments (SPE) explosions to invert for the moment-tensor spectra of these explosions. I employed a one-dimensional (1D) Earth model for Green's function calculations. The model was developed from P- and Rg-wave travel times and amplitudes. I selected data for the inversion based on the criterion that they had consistent travel times and amplitude behavior as those predicted by the 1D model. Due to limited azimuthal coverage of the sources and the mostly vertical-component-only nature of the dataset, only long-period, volumetric components of the moment-tensor spectra were well constrained.

  19. Crosswell CASSM(Continuous Active-Source Seismic Monitoring): Recent Developments (Invited)

    NASA Astrophysics Data System (ADS)

    Daley, T. M.; Niu, F.; Ajo Franklin, J. B.; Solbau, R.; Silver, P. G.

    2009-12-01

    Continuous active-source monitoring using borehole sources and sensors in a crosswell configuration has proven to be a useful tool for monitoring subsurface processes (Silver, et al, 2007; Daley, et al, 2007; Niu, et al, 2008). This recent work has focused on two applications: monitoring stress changes related to seismicity and monitoring changes in fluid distribution related to geologic storage of CO2. Field tests have demonstrated precision in travel time measurement of up to 1.1 x 10-7 s, and in velocity perturbation measurement of up to 1.1 x 10-5 (Niu, et al 2008). In this talk I will summarize our preceding work and discuss current developments. Current efforts address both hardware and design challenges to improving the methodology. Hardware issues include deployment of multiple piezoelectric sources in shallow and deep boreholes, source and sensor deployment on tubing inside casing, and deployment with other monitoring instrumentation. Design issues are focused on use of multiple sources and/or sensors to obtain optimal spatial resolution for monitoring processes in the interwell region. This design issue can be investigated with optimal experiment design theory. New field experiments for monitoring seismicity (at SAFOD) and CO2 injection (at a US Dept of Energy pilot) are in the design/deployment stage. Current status of these projects will be discussed. References: Silver, P.G., Daley, T.M., Niu, F., Majer, E.L., 2007, Active source monitoring of crosswell seismic travel time for stress induced changes, Bulletin of Seismological Society of America, v97, n1B, p281-293. Daley, T.M., R.D. Solbau, J.B. Ajo-Franklin, S.M. Benson, 2007, Continuous active-source monitoring of CO2 injection in a brine aquifer, Geophysics, v72, n5, pA57-A61, DOI:10.1190/1.2754716. Niu, F., Silver, P.G., Daley, T.M., Cheng, X., Majer, E.L., 2008, Preseismic velocity changes observed from active source monitoring at the Parkfield SAFOD drill site, Nature, 454, 204-208, DOI:10

  20. Source Region Modeling of Explosions 2 and 3 from the Source Physics Experiment Using the Rayleigh Integral Method

    NASA Astrophysics Data System (ADS)

    Jones, K. R.; Arrowsmith, S.; Whitaker, R. W.

    2012-12-01

    The overall mission of the National Center for Nuclear Security (NCNS) Source Physics Experiment at the National Nuclear Security Site (SPE-N) near Las Vegas, Nevada is to improve upon and develop new physics based models for underground nuclear explosions using scaled, underground chemical explosions as proxies. To this end, we use the Rayleigh integral as an approximation to the Helmholz-Kirchoff integral, [Whitaker, 2007 and Arrowsmith et al., 2011], to model infrasound generation in the far-field. Infrasound generated by single-point explosive sources above ground can typically be treated as monopole point-sources. While the source is relatively simple, the research needed to model above ground point-sources is complicated by path effects related to the propagation of the acoustic signal and out of the scope of this study. In contrast, for explosions that occur below ground, including the SPE explosions, the source region is more complicated but the observation distances are much closer (< 5 km), thus greatly reducing the complication of path effects. In this case, elastic energy from the explosions radiates upward and spreads out, depending on depth, to a more distributed region at the surface. Due to this broad surface perturbation of the atmosphere we cannot model the source as a simple monopole point-source. Instead, we use the analogy of a piston mounted in a rigid, infinite baffle, where the surface area that moves as a result of the explosion is the piston and the surrounding region is the baffle. The area of the "piston" is determined by the depth and explosive yield of the event. In this study we look at data from SPE-N-2 and SPE-N-3. Both shots had an explosive yield of 1 ton at a depth of 45 m. We collected infrasound data with up to eight stations and 32 sensors within a 5 km radius of ground zero. To determine the area of the surface acceleration, we used data from twelve surface accelerometers installed within 100 m radially about ground zero

  1. GROUNDWATER QUALITY MONITORING OF WESTERN COAL STRIP MINING: PRELIMINARY DESIGNS FOR ACTIVE MINE SOURCES OF POLLUTION

    EPA Science Inventory

    Three potential pollution source categories have been identified for Western coal strip mines. These sources include mine stockpiles, mine waters, and miscellaneous active mine sources. TEMPO's stepwise monitoring methodology (Todd et al., 1976) is used to develop groundwater qua...

  2. Orally active opioid compounds from a non-poppy source.

    PubMed

    Raffa, Robert B; Beckett, Jaclyn R; Brahmbhatt, Vivek N; Ebinger, Theresa M; Fabian, Chrisjon A; Nixon, Justin R; Orlando, Steven T; Rana, Chintan A; Tejani, Ali H; Tomazic, Robert J

    2013-06-27

    The basic science and clinical use of morphine and other "opioid" drugs are based almost exclusively on the extracts or analogues of compounds isolated from a single source, the opium poppy (Papaver somniferum). However, it now appears that biological diversity has evolved an alternative source. Specifically, at least two alkaloids isolated from the plant Mitragyna speciosa, mitragynine ((E)-2-[(2S,3S)-3-ethyl-8-methoxy-1,2,3,4,6,7,12,12b-octahydroindolo[3,2-h]quinolizin-2-yl]-3-methoxyprop-2-enoic acid methyl ester; 9-methoxy coryantheidine; MG) and 7-hydroxymitragynine (7-OH-MG), and several synthetic analogues of these natural products display centrally mediated (supraspinal and spinal) antinociceptive (analgesic) activity in various pain models. Several characteristics of these compounds suggest a classic "opioid" mechanism of action: nanomolar affinity for opioid receptors, competitive interaction with the opioid receptor antagonist naloxone, and two-way analgesic cross-tolerance with morphine. However, other characteristics of the compounds suggest novelty, particularly chemical structure and possible greater separation from side effects. We review the chemical and pharmacological properties of these compounds. PMID:23517479

  3. Antiglycation Activity of Iridoids and Their Food Sources

    PubMed Central

    West, Brett J.; Uwaya, Akemi; Isami, Fumiyuki; Deng, Shixin; Nakajima, Sanae; Jensen, C. Jarakae

    2014-01-01

    Iridoids are dietary phytochemicals that may have the ability to inhibit the formation of advanced glycation end products (AGEs). Three studies were conducted to investigate this anti-AGE potential. First, the inhibition of fluorescence intensity by food-derived iridoids, after 4 days of incubation with bovine serum albumin, glucose, and fructose, was used to evaluate in vitro antiglycation activity. Next, an 8-week open-label pilot study used the AGE Reader to measure changes in the skin autofluorescence of 34 overweight adults who consumed daily a beverage containing food sources of iridoids. Finally, a cross-sectional population study with 3913 people analyzed the relationship between daily iridoid intake and AGE accumulation, as measured by skin autofluorescence with the TruAge scanner. In the in vitro test, deacetylasperulosidic acid and loganic acid both inhibited glycation in a concentration-dependent manner, with respective IC50 values of 3.55 and 2.69 mM. In the pilot study, average skin autofluorescence measurements decreased by 0.12 units (P < 0.05). The cross-sectional population survey revealed that, for every mg of iridoids consumed, there is a corresponding decline in AGE associated age of 0.017 years (P < 0.0001). These results suggest that consumption of dietary sources of iridoids may be a useful antiaging strategy. PMID:26904624

  4. Source localization of brain activity using helium-free interferometer

    NASA Astrophysics Data System (ADS)

    Dammers, Jürgen; Chocholacs, Harald; Eich, Eberhard; Boers, Frank; Faley, Michael; Dunin-Borkowski, Rafal E.; Jon Shah, N.

    2014-05-01

    To detect extremely small magnetic fields generated by the human brain, currently all commercial magnetoencephalography (MEG) systems are equipped with low-temperature (low-Tc) superconducting quantum interference device (SQUID) sensors that use liquid helium for cooling. The limited and increasingly expensive supply of helium, which has seen dramatic price increases recently, has become a real problem for such systems and the situation shows no signs of abating. MEG research in the long run is now endangered. In this study, we report a MEG source localization utilizing a single, highly sensitive SQUID cooled with liquid nitrogen only. Our findings confirm that localization of neuromagnetic activity is indeed possible using high-Tc SQUIDs. We believe that our findings secure the future of this exquisitely sensitive technique and have major implications for brain research and the developments of cost-effective multi-channel, high-Tc SQUID-based MEG systems.

  5. Source localization of brain activity using helium-free interferometer

    SciTech Connect

    Dammers, Jürgen Chocholacs, Harald; Eich, Eberhard; Boers, Frank; Faley, Michael; Dunin-Borkowski, Rafal E.; Jon Shah, N.

    2014-05-26

    To detect extremely small magnetic fields generated by the human brain, currently all commercial magnetoencephalography (MEG) systems are equipped with low-temperature (low-T{sub c}) superconducting quantum interference device (SQUID) sensors that use liquid helium for cooling. The limited and increasingly expensive supply of helium, which has seen dramatic price increases recently, has become a real problem for such systems and the situation shows no signs of abating. MEG research in the long run is now endangered. In this study, we report a MEG source localization utilizing a single, highly sensitive SQUID cooled with liquid nitrogen only. Our findings confirm that localization of neuromagnetic activity is indeed possible using high-T{sub c} SQUIDs. We believe that our findings secure the future of this exquisitely sensitive technique and have major implications for brain research and the developments of cost-effective multi-channel, high-T{sub c} SQUID-based MEG systems.

  6. Groundwater seepage landscapes from distant and local sources in experiments and on Mars

    NASA Astrophysics Data System (ADS)

    Marra, W. A.; McLelland, S. J.; Parsons, D. R.; Murphy, B. J.; Hauber, E.; Kleinhans, M. G.

    2015-08-01

    Valleys with theater-shaped heads can form due to the seepage of groundwater and as a result of knickpoint (waterfall) erosion generated by overland flow. This ambiguity in the mechanism of formation hampers the interpretation of such valleys on Mars, particularly since there is limited knowledge of material properties. Moreover, the hydrological implications of a groundwater or surface water origin are important for our understanding of the evolution of surface features on Mars, and a quantification of valley morphologies at the landscape scale may provide diagnostic insights on the formative hydrological conditions. However, flow patterns and the resulting landscapes produced by different sources of groundwater are poorly understood. We aim to improve the understanding of the formation of entire valley landscapes through seepage processes from different groundwater sources that will provide a framework of landscape metrics for the interpretation of such systems. We study groundwater seepage from a distant source of groundwater and from infiltration of local precipitation in a series of sandbox experiments and combine our results with previous experiments and observations of the Martian surface. Key results are that groundwater flow piracy acts on valleys fed by a distant groundwater source and results in a sparsely dissected landscape of many small and a few large valleys. In contrast, valleys fed by a local groundwater source, i.e., nearby infiltration, result in a densely dissected landscape. In addition, valleys fed by a distant groundwater source grow towards that source, while valleys with a local source grow in a broad range of directions and have a strong tendency to bifurcate, particularly on flatter surfaces. We consider these results with respect to two Martian cases: Louros Valles shows properties of seepage by a local source of groundwater and Nirgal Vallis shows evidence of a distant source, which we interpret as groundwater flow from Tharsis.

  7. The reversed description-experience gap: Disentangling sources of presentation format effects in risky choice.

    PubMed

    Glöckner, Andreas; Hilbig, Benjamin E; Henninger, Felix; Fiedler, Susann

    2016-04-01

    Previous literature has suggested that risky choice patterns in general--and probability weighting in particular--are strikingly different in experience-based as compared with description-based formats. In 2 reanalyses and 3 new experiments, we investigate differences between experience-based and description-based decisions using a parametric approach based on cumulative prospect theory (CPT). Once controlling for sampling biases, we consistently find a reversal of the typical description-experience gap, that is, a reduced sensitivity to probabilities and increased overweighting of small probabilities in decisions from experience as compared with decisions from descriptions. This finding supports the hypothesis that regression to the mean effects in probability estimation are a crucial source of differences between both presentation formats. Further analyses identified task specific information asymmetry prevalent in gambles involving certainty as a third source of differences. We present a novel conceptualization of multiple independent sources of bias that contribute to the description-experience gap, namely sampling biases and task specific information asymmetry on the one hand, and regression to the mean effects in probability estimation on the other hand. PMID:26974209

  8. Advancing Explosion Source Theory through Experimentation: Results from Seismic Experiments Since the Moratorium on Nuclear Testing

    NASA Astrophysics Data System (ADS)

    Bonner, J. L.; Stump, B. W.

    2011-12-01

    On 23 September 1992, the United States conducted the nuclear explosion DIVIDER at the Nevada Test Site (NTS). It would become the last US nuclear test when a moratorium ended testing the following month. Many of the theoretical explosion seismic models used today were developed from observations of hundreds of nuclear tests at NTS and around the world. Since the moratorium, researchers have turned to chemical explosions as a possible surrogate for continued nuclear explosion research. This talk reviews experiments since the moratorium that have used chemical explosions to advance explosion source models. The 1993 Non-Proliferation Experiment examined single-point, fully contained chemical-nuclear equivalence by detonating over a kiloton of chemical explosive at NTS in close proximity to previous nuclear explosion tests. When compared with data from these nearby nuclear explosions, the regional and near-source seismic data were found to be essentially identical after accounting for different yield scaling factors for chemical and nuclear explosions. The relationship between contained chemical explosions and large production mining shots was studied at the Black Thunder coal mine in Wyoming in 1995. The research led to an improved source model for delay-fired mining explosions and a better understanding of mining explosion detection by the International Monitoring System (IMS). The effect of depth was examined in a 1997 Kazakhstan Depth of Burial experiment. Researchers used local and regional seismic observations to conclude that the dominant mechanism for enhanced regional shear waves was local Rg scattering. Travel-time calibration for the IMS was the focus of the 1999 Dead Sea Experiment where a 10-ton shot was recorded as far away as 5000 km. The Arizona Source Phenomenology Experiments provided a comparison of fully- and partially-contained chemical shots with mining explosions, thus quantifying the reduction in seismic amplitudes associated with partial

  9. Pomegranate fruit as a rich source of biologically active compounds.

    PubMed

    Sreekumar, Sreeja; Sithul, Hima; Muraleedharan, Parvathy; Azeez, Juberiya Mohammed; Sreeharshan, Sreeja

    2014-01-01

    Pomegranate is a widely used plant having medicinal properties. In this review, we have mainly focused on the already published data from our laboratory pertaining to the effect of methanol extract of pericarp of pomegranate (PME) and have compared it with other relevant literatures on Punica. Earlier, we had shown its antiproliferative effect using human breast (MCF-7, MDA MB-231), and endometrial (HEC-1A), cervical (SiHa, HeLa), and ovarian (SKOV3) cancer cell lines, and normal breast fibroblasts (MCF-10A) at concentration of 20-320 μg/mL. The expressions of selected estrogen responsive genes (PR, pS2, and C-Myc) were downregulated by PME. Unlike estradiol, PME did not increase the uterine weight and proliferation in bilaterally ovariectomized Swiss-Albino mice models and its cardioprotective effects were comparable to that of 17 β -estradiol. We had further assessed the protective role of PME on skeletal system, using MC3T3-E1 cells. The results indicated that PME (80 μg/mL) significantly increased ALP (Alkaline Phosphatase) activity, supporting its suggested role in modulating osteoblastic cell differentiation. The antiosteoporotic potential of PME was also evaluated in ovariectomized (OVX) rodent model. The results from our studies and from various other studies support the fact that pomegranate fruit is indeed a source of biologically active compounds. PMID:24818149

  10. A novel method for the activity measurement of large-area beta reference sources.

    PubMed

    Stanga, D; De Felice, P; Keightley, J; Capogni, M; Ioan, M R

    2016-03-01

    A novel method has been developed for the activity measurement of large-area beta reference sources. It makes use of two emission rate measurements and is based on the weak dependence between the source activity and the activity distribution for a given value of transmission coefficient. The method was checked experimentally by measuring the activity of two ((60)Co and (137)Cs) large-area reference sources constructed from anodized aluminum foils. Measurement results were compared with the activity values measured by gamma spectrometry. For each source, they agree within one standard uncertainty and also agree within the same limits with the certified values of the source activity. PMID:26701656

  11. An EAS experiment at mountain altitude for the detection of gamma-ray sources

    NASA Technical Reports Server (NTRS)

    Allkofer, O. C.; Samorski, M.; Stamm, W.

    1985-01-01

    The plan of an extensive air shower experiment 2.200 m above sea level for the detection of 10 to the 14th power eV to 10 to the 17th power eV gamma rays from sources in the declination band 0 deg to + 60 deg is described. The site selection, detector array and electronic layout are detailed.

  12. Practicum Experiences as Sources of Pre-Service Teachers' Self-Efficacy

    ERIC Educational Resources Information Center

    Martins, Maria; Costa, João; Onofre, Marcos

    2015-01-01

    This study examines physical education pre-service teachers' (PTs) self-efficacy and practicum experiences as self-efficacy sources through a mixed-method approach. For the quantitative phase, a self-efficacy questionnaire was applied to 141 PTs. Results showed a stronger self-efficacy in the relationship with students and discipline promotion.…

  13. Educative Experiences of Rural Junior High History Fair Participants Seeking and Evaluating Online Primary Sources

    ERIC Educational Resources Information Center

    Johnson, Riley Todd

    2012-01-01

    This phenomenological ethnographic multi-case study's purpose was to gain insight into experiences of rural junior high History Fair participants as they searched for and evaluated online primary sources. Drawing on the theories of Dewey and Kuhlthau, the study examined how the participants searched the Internet, what strategies they used to…

  14. Calculation of the neutron source distribution in the VENUS PWR Mockup Experiment

    SciTech Connect

    Williams, M.L.; Morakinyo, P.; Kam, F.B.K.; Leenders, L.; Minsart, G.; Fabry, A.

    1984-01-01

    The VENUS PWR Mockup Experiment is an important component of the Nuclear Regulatory Commission's program goal of benchmarking reactor pressure vessel (RPV) fluence calculations in order to determine the accuracy to which RPV fluence can be computed. Of particular concern in this experiment is the accuracy of the source calculation near the core-baffle interface, which is the important region for contributing to RPV fluence. Results indicate that the calculated neutron source distribution within the VENUS core agrees with the experimental measured values with an average error of less than 3%, except at the baffle corner, where the error is about 6%. Better agreement with the measured fission distribution was obtained with a detailed space-dependent cross-section weighting procedure for thermal cross sections near the core-baffle interface region. The maximum error introduced into the predicted RPV fluence due to source errors should be on the order of 5%.

  15. In-space technology flight experiments: Middeck 0-gravity Dynamics Experiment (MODE) and Middeck Active Control Experiment (MACE)

    NASA Technical Reports Server (NTRS)

    Venneri, Samuel L.

    1991-01-01

    The topics addressed are covered in viewgraph form. The objective of the Middeck 0-gravity Dynamics Experiment (MODE) programs is to study gravity dependent nonlinearities associated with fluid slosh and truss structure dynamics. MODE provides a reusable facility for on-orbit dynamics testing of small scale test articles in the shirt sleeve environment on the Shuttle middeck. Flight program objective of Middeck Active Control Experiment (MACE) is to study gravity effects on the performance and stability of controlled structures.

  16. The Q/U Imaging Experiment: Polarization Measurements of Radio Sources at 43 and 95 GHz

    NASA Astrophysics Data System (ADS)

    Huffenberger, K. M.; Araujo, D.; Bischoff, C.; Buder, I.; Chinone, Y.; Cleary, K.; Kusaka, A.; Monsalve, R.; Næss, S. K.; Newburgh, L. B.; Reeves, R.; Ruud, T. M.; Wehus, I. K.; Zwart, J. T. L.; Dickinson, C.; Eriksen, H. K.; Gaier, T.; Gundersen, J. O.; Hasegawa, M.; Hazumi, M.; Miller, A. D.; Radford, S. J. E.; Readhead, A. C. S.; Staggs, S. T.; Tajima, O.; Thompson, K. L.; QUIET Collaboration

    2015-06-01

    We present polarization measurements of extragalactic radio sources observed during the cosmic microwave background polarization survey of the Q/U Imaging Experiment (QUIET), operating at 43 GHz (Q-band) and 95 GHz (W-band). We examine sources selected at 20 GHz from the public, >40 mJy catalog of the Australia Telescope (AT20G) survey. There are ˜480 such sources within QUIET’s four low-foreground survey patches, including the nearby radio galaxies Centaurus A and Pictor A. The median error on our polarized flux density measurements is 30-40 mJy per Stokes parameter. At signal-to-noise ratio > 3 significance, we detect linear polarization for seven sources in Q-band and six in W-band; only 1.3 ± 1.1 detections per frequency band are expected by chance. For sources without a detection of polarized emission, we find that half of the sources have polarization amplitudes below 90 mJy (Q-band) and 106 mJy (W-band), at 95% confidence. Finally, we compare our polarization measurements to intensity and polarization measurements of the same sources from the literature. For the four sources with WMAP and Planck intensity measurements >1 Jy, the polarization fractions are above 1% in both QUIET bands. At high significance, we compute polarization fractions as much as 10%-20% for some sources, but the effects of source variability may cut that level in half for contemporaneous comparisons. Our results indicate that simple models—ones that scale a fixed polarization fraction with frequency—are inadequate to model the behavior of these sources and their contributions to polarization maps.

  17. Sources and evolution of cloud-active aerosol in California's Sierra Nevada Mountains

    NASA Astrophysics Data System (ADS)

    Roberts, G. C.; Corrigan, C.; Noblitt, S.; Creamean, J.; Collins, D. B.; Cahill, J. F.; Prather, K. A.; Collett, J. L.; Henry, C.

    2011-12-01

    To assess the sources of cloud-active aerosol and their influence on the hydrological cycle in California, the CalWater Experiment took place in winter 2011 in the foothills of the Sierra Nevada Mountains. During this experiment, we coupled the capabilities of demonstrated miniaturized instrumentation - cloud condensation nuclei (CCN), water condensation nuclei (WCN) and microchip capillary electrophoresis (MCE) - to provide direct chemical measurements of cloud active aerosols. Ion concentrations of CCN droplets attribute the anthropogenic, marine and secondary organic contributions to cloud-active aerosols. Detailed spectra from an Aerosol-Time-of-Flight Mass Spectrometer provide additional information on the sources of aerosol. Storm fronts and changes in atmospheric boundary layer brought aerosol and anions associated with Central Valley pollution to the field site with CCN concentrations reaching several thousand cm-3. Hygroscopicity parameters indicate aging of the organic fraction during aerosol transport from the Central Valley to the mountains. Otherwise, CCN concentrations were low when high pressure systems prevented boundary layer development and intrusion of the Central Valley pollution to the site. MCE results show that nitrates and sulfates comprise most of the fraction of the aerosol anion mass (PM1). During the passage of storm fronts, which transported pollution from the Central Valley upslope, nitrate concentrations peaked at several μ g m-3. Low supersaturation CCN concentrations coincide with increases in aerosol nitrate, which suggests that nitrate has a role in cloud formation of giant CCN and, furthermore, in precipitation processes in the Sierra Nevada. CCN spectra show large variations depending on the aerosol sources and sometimes exhibit bi-modal distributions with minima at 0.3% Sc -- similar to the so-called 'Hoppel minima' associated to number size distributions. During these bi-modal events, sulfate also increases supporting the

  18. Simulations towards optimization of a neutron/anti-neutron oscillation experiment at the European Spallation Source

    NASA Astrophysics Data System (ADS)

    Frost, Matthew; Kamyshkov, Yuri; Castellanos, Luis; Klinkby, Esben; US NNbar Collaboration

    2015-04-01

    The observation of Neutron/Anti-neutron oscillation would prove the existence of Baryon Number Violation (BNV), and thus an explanation for the dominance of matter over anti-matter in the universe. The latest experiments have shown the oscillation time to be greater than 8.6 x 107 seconds, whereas current theoretical predictions suggest times on the order of 108 to 109 seconds. A neutron oscillation experiment proposed at the European Spallation Source (ESS) would provide sensitivity of more than 1000 times previous experiments performed, thus providing a result well-suited to confirm or deny current theory. A conceptual design of the proposed experiment will be presented, as well as the optimization of key experiment components using Monte-Carlo simulation methods, including the McStas neutron ray-trace simulation package. This work is supported by the Organized Research Units Program funded by The University of Tennessee, Knoxville Office of Research and Engagement.

  19. Hen's egg as a source of valuable biologically active substances.

    PubMed

    Zdrojewicz, Zygmunt; Herman, Marta; Starostecka, Ewa

    2016-01-01

    The aim of this article is to show current knowledge concerning valuable substances biologically active present in hen eggs and underline important nutritive role of hen eggs. Hen egg is a good source of nutrients such as proteins, vitamins (A, B2, B6, B12, D, E, K), minerals and lipids. The significant part of lipids is a group of unsaturated phospholipids, which are components of cell membranes, act protectively on the cardiovascular system and contribute to a decrease of cholesterol level and blood pressure. Therefore, the consumption of unsaturated phospholipids is recommended especially in patients suffering from diseases of the cardiovascular system. Another important substance is egg cystatin, which has a wide spectrum of biological functions, for example the ability to stimulate cell growth, inhibit inflammatory processes and has antibacterial and antiviral properties. Other substance presented in the egg white which helps fight bacteria is lysozyme. It is used in medicine as an aid in antibiotic therapy and analgesic in the course of infection, as well as in tumor malignancies. Among the components contained in the egg yolk there is also immunoglobulin Y which due to its therapeutic importance deserves special attention. Its use offers the possibility of replacing chemotherapeutic agents in the treatment of bacterial infections of digestive system, as well as an opportunity for the development of medicine associated with passive immunization of patients. The egg is a rich source of retinol which gradual depletion in the organism causes many eye pathologies. A very important and useful part of the egg, used in medicine is a shell and its membranes, due to the high collagen content relevant in the treatment of connective tissue diseases. PMID:27383572

  20. Infrasound Interferometry for Active and Passive Sources: A Synthetic Example for Waves Refracted in the Stratosphere

    NASA Astrophysics Data System (ADS)

    Fricke, J.; Ruigrok, E. N.; Evers, L. G.; El Allouche, N.; Simons, D.; Wapenaar, C. A.

    2012-12-01

    The travel time of infrasound through the stratosphere depends on the temperature profile and the wind speed. These atmospheric conditions can be estimated by determining the travel times between different receivers (microbarometers). Therefore the determination of the travel time of infrasound between different receivers becomes more and more important. An approach to determine the travel time is infrasound interferometry. In this work, the infrasound interferometry is applied to synthetic data of active and passive sources refracted by the stratosphere is tested. The synthetic data were generated with a raytracing model. The inputs of the raytracing model are the atmospheric conditions and a source wavelet. As source wavelet we used blast waves and microbaroms. With the atmospheric conditions and the source wavelet the raytracing model calculates the raypath and the travel time of the infrasound. In order to simulate the measurement of a receiver the rays which reach the receiver need to be found. The rays which propagate from a source to the receiver are called eigen rays. The simulation of the receiver measurements takes into account the travel time along the eigen rays, the attenuation of the different atmospheric layers, the spreading of the rays and the influence of caustics. The simulated measurements of the different receivers are combined to synthetic barograms. Two synthetic experiments were performed with the described model. In the first experiment the interferometry was applied to barograms of active sources like blast waves. The second experiment with microbaroms tests the applicability of interferometry to barograms of passive sources. In the next step infrasound interferometry will be applied to measured barograms. These barograms are measured with the 'Large Aperture Infrasound Array' (LAIA). LAIA is being installed by the Royal Netherlands Meteorological Institute (KNMI) in the framework of the radio-astronomical 'Low Frequency Array' (LOFAR

  1. Sexual Experience Modulates Neuronal Activity in Male Japanese Quail

    PubMed Central

    Can, Adem; Domjan, Michael; Delville, Yvon

    2008-01-01

    After an initial increase, repeated exposure to a particular stimulus or familiarity with an event results in lower immediate early gene expression levels in relevant brain structures. We predicted that similar effects would occur in Japanese quail after repeated sexual experience within brain areas involved in sexual behavior, namely, the medial preoptic nucleus (POM), the bed nucleus of stria terminalis (BST), and the nucleus taeniae of the amygdala (TnA), an avian homolog of medial amygdala. High experience subjects copulated with a female once on each of 16 consecutive days, whereas low experience subjects were allowed to copulate either once or twice. Control subjects were never exposed to a female. High experience subjects were faster to initiate sexual interaction, performed more cloacal contacts, and completed each cloacal contact faster than low experience subjects. Low experience subjects showed an increase in egr-1 (ZENK) expression, an immediate early gene product used as marker of neural activation in birds, in the areas of interest. In contrast, in high experience animals, egr-1 expression in the POM, BST and the periaqueductal gray (PAG) was not different than the level of expression in unmated controls. These results show that experience modulates the level of immediate early gene expression in the case of sexual behavior. Our results also indicate that immediate early gene expression in specific brain areas is not necessarily related to behavioral output, but depends on the behavioral history of the subjects. PMID:17826778

  2. Applicability of light-emitting diodes as light sources for active differential optical absorption spectroscopy measurements.

    PubMed

    Kern, Christoph; Trick, Sebastian; Rippel, Bernhard; Platt, Ulrich

    2006-03-20

    We present what is to our knowledge the first use of light-emitting diodes (LEDs) as light sources for long-path differential optical absorption spectroscopy (LP-DOAS) measurements of trace gases in the open atmosphere. Modern LEDs represent a potentially advantageous alternative to thermal light sources, in particular to xenon arc lamps, which are the most common active DOAS light sources. The radiative properties of a variety of LEDs were characterized, and parameters such as spectral shape, spectral range, spectral stability, and ways in which they can be influenced by environmental factors were analyzed. The spectra of several LEDs were found to contain Fabry-Perot etalon-induced spectral structures that interfered with the DOAS evaluation, in particular when a constant temperature was not maintained. It was shown that LEDs can be used successfully as light sources in active DOAS experiments that measure NO2 and NO3 near 450 and 630 nm, respectively. Average detection limits of 0.3 parts in 10(9) and 16 parts in 10(12) respectively, were obtained by use of a 6 km light path in the open atmosphere. PMID:16579579

  3. psiTurk: An open-source framework for conducting replicable behavioral experiments online.

    PubMed

    Gureckis, Todd M; Martin, Jay; McDonnell, John; Rich, Alexander S; Markant, Doug; Coenen, Anna; Halpern, David; Hamrick, Jessica B; Chan, Patricia

    2016-09-01

    Online data collection has begun to revolutionize the behavioral sciences. However, conducting carefully controlled behavioral experiments online introduces a number of new of technical and scientific challenges. The project described in this paper, psiTurk, is an open-source platform which helps researchers develop experiment designs which can be conducted over the Internet. The tool primarily interfaces with Amazon's Mechanical Turk, a popular crowd-sourcing labor market. This paper describes the basic architecture of the system and introduces new users to the overall goals. psiTurk aims to reduce the technical hurdles for researchers developing online experiments while improving the transparency and collaborative nature of the behavioral sciences. PMID:26428910

  4. 2001 NSLS ACTIVITY REPORT (NATIONAL SYNCHROTRON LIGHT SOURCE).

    SciTech Connect

    CORWIN, M.A.

    2002-05-01

    The year 2001 has been another highly productive year at the NSLS, with over 2500 users, including 720 first time users, conducting nearly 1200 experiments in fields ranging from the life, materials, chemical, and environmental sciences to applied science and technology. An impressive array of highlights from this scientific activity is included in this Activity Report. They include the first demonstration of a direct structural probe of the superconducting ground state in the cuprates by utilizing anomalous soft x-ray resonance effects to selectively enhance the scattering from doped holes. Another highly significant result was the determination of the structure of the potassium channel membrane protein. This is especially significant as it provides insight into how the channel functions and how it selects a particular kind of ion. In the nanoscience area, small angle x-ray scattering measurements played an essential role in determining that preferential sequestering of tailored metal nanocrystals into a self-assembled lamellar diblock copolymer can produce high quality metallodielectric photonic bandgap structures, demonstrating the potential of these nanocomposites for photonic crystal engineering. The infrared microscopy program continued to yield noteworthy results, including an important study that characterized the types and abundances of organic materials in contaminated and uncontaminated sediments from the New York/New Jersey Harbor. These results will be useful in devising improved methods for the destruction or removal of these environmental contaminants.

  5. Studies of HT and HTO Behavior in the Vicinity of Long-Term Emission Source: Model - Experiment Intercomparison

    SciTech Connect

    Golubev, A. V.; Aleinikov, A. Y.; Golubeva, V. N.; Khabibulin, M. M.; Glagolev, M. V.; Misatyuk, S. E.; Mavrin, S. V.; Belot, Y. A.; Raskob, W.; Tate, P. J.

    2003-02-24

    There are presented in the research results of HT and HTO deposition and the model of HT (HTO) atmosphere concentration in the vicinity of a long-term HT and HTO emission source. Scavenging of HTO by precipitations was studied in 6 field experiments. The site of the scavenging experiments was around a 30 m emission source. The sampling arcs were chosen at 150-300 m from the base of the source to minimize dry deposition on the precipitation collectors. Data of the scavenging experiments are presented. Kinetics of HT deposition to soil through its oxidation has been studied in laboratory conditions. The activity of HTO converted in the soil sample during a certain period of time was used to determine the oxidation rate. This rate varies, depending on the catalytic and/or biological activity of the soil material. Theoretical considerations have shown that the deposition rate can be expressed by the effective rate of oxidation, which formally corresponds to the first-order HT oxidation. HT deposition rates are reported. The model, used for assessments, takes into account atmospheric dispersion, deposition and reemission. The model of HTO wet deposition is taken into account kinetics of HTO exchange between vapor and liquid phase with parameters such as rain drop spectra, rain intensity, condensation-evaporation on drop's interface. Gauss type formulae for continuous emission source is used to calculate HTO atmospheric concentration. Meteorological data are used as input parameters for modeling. The data presented on HT deposition to soil and HTO washout by precipitation is required for assessment of consequences of HT (HTO) release into the atmosphere.

  6. Experiences with moving to open source standards for building and packaging

    NASA Astrophysics Data System (ADS)

    van Dok, D. H.; Sallé, M.; Koeroo, O. A.

    2014-06-01

    The LCMAPS family of grid security middleware was developed during a series of European grid projects from 2001 until 2013. Since 2009 we actively started to move away from ETICS, the project-specific build system, to common open-source tools for building and packaging, such as the GNU Autotools and the Fedora and Debian tool set. By following the guidelines of these mainstream distributions, and improving the source code to fit in with the commonly available open source tools, we have established low-cost, long term sustainability of the code base.

  7. An impulsive source with variable output and stable bandwidth for underwater acoustic experiments.

    PubMed

    McNeese, Andrew R; Wilson, Preston S; Sagers, Jason D; Knobles, David P

    2014-07-01

    The Combustive Sound Source (CSS) is being developed as an environmentally friendly source to be used in ocean acoustics research and surveys. It has the ability to maintain the same wide bandwidth signal over a 20 dB drop in source level. The CSS consists of a submersible combustion chamber filled with a fuel/oxidizer mixture. The mixture is ignited and the ensuing combustion and bubble activity radiates an impulsive, thus broadband, acoustic pulse. The ability to control pulse amplitude while maintaining bandwidth is demonstrated. PMID:24993239

  8. Beam experiments with the Grenoble test electron cyclotron resonance ion source at iThemba LABS.

    PubMed

    Thomae, R; Conradie, J; Fourie, D; Mira, J; Nemulodi, F; Kuechler, D; Toivanen, V

    2016-02-01

    At iThemba Laboratory for Accelerator Based Sciences (iThemba LABS) an electron cyclotron ion source was installed and commissioned. This source is a copy of the Grenoble Test Source (GTS) for the production of highly charged ions. The source is similar to the GTS-LHC at CERN and named GTS2. A collaboration between the Accelerators and Beam Physics Group of CERN and the Accelerator and Engineering Department of iThemba LABS was proposed in which the development of high intensity argon and xenon beams is envisaged. In this paper, we present beam experiments with the GTS2 at iThemba LABS, in which the results of continuous wave and afterglow operation of xenon ion beams with oxygen as supporting gases are presented. PMID:26931949

  9. Beam experiments with the Grenoble test electron cyclotron resonance ion source at iThemba LABS

    NASA Astrophysics Data System (ADS)

    Thomae, R.; Conradie, J.; Fourie, D.; Mira, J.; Nemulodi, F.; Kuechler, D.; Toivanen, V.

    2016-02-01

    At iThemba Laboratory for Accelerator Based Sciences (iThemba LABS) an electron cyclotron ion source was installed and commissioned. This source is a copy of the Grenoble Test Source (GTS) for the production of highly charged ions. The source is similar to the GTS-LHC at CERN and named GTS2. A collaboration between the Accelerators and Beam Physics Group of CERN and the Accelerator and Engineering Department of iThemba LABS was proposed in which the development of high intensity argon and xenon beams is envisaged. In this paper, we present beam experiments with the GTS2 at iThemba LABS, in which the results of continuous wave and afterglow operation of xenon ion beams with oxygen as supporting gases are presented.

  10. Report on active and planned spacecraft and experiments

    NASA Technical Reports Server (NTRS)

    Littlefield, R. G. (Editor)

    1983-01-01

    Information concerning active and planned spacecraft and experiments is included. The information covers a wide range of scientific disciplines: astronomy, earth sciences, meteorology, planetary sciences, aeronomy, particles and fields, solar physics, life sciences, and material sciences. These spacecraft projects represent the efforts and fundng of individual countries as well as cooperative arrangements among different countries.

  11. Report on active and planned spacecraft and experiments

    NASA Technical Reports Server (NTRS)

    Vette, J. I. (Editor); Vostreys, R. W. (Editor); Horowitz, R. (Editor)

    1978-01-01

    Information is presented, concerning active and planned spacecraft and experiments known to the National Space Science Data Center. The information included a wide range of disciplines: astronomy, earth sciences, meteorology, planetary sciences, aeronomy, particles and fields, solar physics, life sciences, and material sciences. These spacecraft projects represented the efforts and funding of individual countries as well as cooperative arrangements among different countries.

  12. Soil Moisture Active Passive Validation Experiment 2008 (SMAPVEX08)

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The Soil Moisture Active Passive Mission (SMAP) is currently addressing issues related to the development and selection of soil moisture retrieval algorithms. Several forums have identified a number of specific questions that require supporting field experiments. Addressing these issues as soon as p...

  13. Report on active and planned spacecraft and experiments

    NASA Technical Reports Server (NTRS)

    Brecht, J. J. (Editor)

    1974-01-01

    Information dealing with active and planned spacecraft and experiments known to the National Space Science Data Center (NSSDC) is presented. Included is information concerning a wide range of disciplines: astronomy, earth sciences, meteorology, planetary sciences, aeronomy, particles and fields, solar physics, life sciences, and material sciences. These spacecraft represent the efforts and funding of individual countries, as well as cooperative arrangements among different countries.

  14. Chemistry: Experiments, Demonstrations and Other Activities Suggested for Chemistry.

    ERIC Educational Resources Information Center

    New York State Education Dept., Albany. Bureau of Secondary Curriculum Development.

    This publication is a handbook used in conjunction with the course of study in chemistry developed through the New York State Education Department and The University of the State of New York. It contains experiments, demonstrations, and other activities for a chemistry course. Areas covered include the science of chemistry, the atomic structure of…

  15. The Middeck Active Control Experiment (MACE): Identification for robust control

    NASA Astrophysics Data System (ADS)

    Karlov, Valery I.

    Viewgraphs on identification for robust control for the Middeck Active Control Experiment (MACE) are presented. Topics covered include: identification for robust control; three levels of identification; basic elements of the approach; advantages of 'post-ID' model of uncertainty; advantages of optimization; and practical realization.

  16. The Middeck Active Control Experiment (MACE): Identification for robust control

    NASA Technical Reports Server (NTRS)

    Karlov, Valery I.

    1992-01-01

    Viewgraphs on identification for robust control for the Middeck Active Control Experiment (MACE) are presented. Topics covered include: identification for robust control; three levels of identification; basic elements of the approach; advantages of 'post-ID' model of uncertainty; advantages of optimization; and practical realization.

  17. Physical Activity Experiences of Boys with and without ADHD

    ERIC Educational Resources Information Center

    Harvey, William J.; Reid, Greg; Bloom, Gordon A.; Staples, Kerri; Grizenko, Natalie; Mbekou, Valentin; Ter-Stepanian, Marina; Joober, Ridha

    2009-01-01

    Physical activity experiences of 12 age-matched boys with and without attention-deficit hyperactivity disorder (ADHD) were explored by converging information from Test of Gross Motor Development-2 assessments and semistructured interviews. The knowledge-based approach and the inhibitory model of executive functions, a combined theoretical lens,…

  18. Report on active and planned spacecraft and experiments

    NASA Technical Reports Server (NTRS)

    Vette, J. I. (Editor); Vostreys, R. W. (Editor)

    1977-01-01

    Information concerning active and planned spacecraft and experiments is reported. The information includes a wide range of disciplines: astronomy, earth sciences, meteorology, planetary sciences, aeronomy, particles and fields, solar physics, life sciences, and material sciences. These spacecraft projects represent the efforts and funding of individual countries as well as cooperative arrangements among different countries.

  19. Chronic active hepatitis experience of Groote Schuur Hospital, 1964 - 1977.

    PubMed

    Poreh, S; Kirsch, R E; Terblanche, J; Saunders, S J

    1980-06-14

    From 1964 to 1977, 54 patients with clinical, biochemical and histological criteria of chronic active hepatitis were seen at Groote Schuur Hospital, Cape Town. Our experience with this disease is reviewed, and the diagnosis and mangement are commented on. PMID:7404076

  20. Perceiving active listening activates the reward system and improves the impression of relevant experiences

    PubMed Central

    Kawamichi, Hiroaki; Yoshihara, Kazufumi; Sasaki, Akihiro T.; Sugawara, Sho K.; Tanabe, Hiroki C.; Shinohara, Ryoji; Sugisawa, Yuka; Tokutake, Kentaro; Mochizuki, Yukiko; Anme, Tokie; Sadato, Norihiro

    2015-01-01

    Although active listening is an influential behavior, which can affect the social responses of others, the neural correlates underlying its perception have remained unclear. Sensing active listening in social interactions is accompanied by an improvement in the recollected impressions of relevant experiences and is thought to arouse positive feelings. We therefore hypothesized that the recognition of active listening activates the reward system, and that the emotional appraisal of experiences that had been subject to active listening would be improved. To test these hypotheses, we conducted functional magnetic resonance imaging (fMRI) on participants viewing assessments of their own personal experiences made by evaluators with or without active listening attitude. Subjects rated evaluators who showed active listening more positively. Furthermore, they rated episodes more positively when they were evaluated by individuals showing active listening. Neural activation in the ventral striatum was enhanced by perceiving active listening, suggesting that this was processed as rewarding. It also activated the right anterior insula, representing positive emotional reappraisal processes. Furthermore, the mentalizing network was activated when participants were being evaluated, irrespective of active listening behavior. Therefore, perceiving active listening appeared to result in positive emotional appraisal and to invoke mental state attribution to the active listener. PMID:25188354

  1. Perceiving active listening activates the reward system and improves the impression of relevant experiences.

    PubMed

    Kawamichi, Hiroaki; Yoshihara, Kazufumi; Sasaki, Akihiro T; Sugawara, Sho K; Tanabe, Hiroki C; Shinohara, Ryoji; Sugisawa, Yuka; Tokutake, Kentaro; Mochizuki, Yukiko; Anme, Tokie; Sadato, Norihiro

    2015-01-01

    Although active listening is an influential behavior, which can affect the social responses of others, the neural correlates underlying its perception have remained unclear. Sensing active listening in social interactions is accompanied by an improvement in the recollected impressions of relevant experiences and is thought to arouse positive feelings. We therefore hypothesized that the recognition of active listening activates the reward system, and that the emotional appraisal of experiences that had been subject to active listening would be improved. To test these hypotheses, we conducted functional magnetic resonance imaging (fMRI) on participants viewing assessments of their own personal experiences made by evaluators with or without active listening attitude. Subjects rated evaluators who showed active listening more positively. Furthermore, they rated episodes more positively when they were evaluated by individuals showing active listening. Neural activation in the ventral striatum was enhanced by perceiving active listening, suggesting that this was processed as rewarding. It also activated the right anterior insula, representing positive emotional reappraisal processes. Furthermore, the mentalizing network was activated when participants were being evaluated, irrespective of active listening behavior. Therefore, perceiving active listening appeared to result in positive emotional appraisal and to invoke mental state attribution to the active listener. PMID:25188354

  2. Advanced Light Source activity report 1996/97

    SciTech Connect

    1997-09-01

    Ten years ago, the Advanced Light Source (ALS) existed as a set of drawings, calculations, and ideas. Four years ago, it stored an electron beam for the first time. Today, the ALS has moved from those ideas and beginnings to a robust, third-generation synchrotron user facility, with eighteen beam lines in use, many more in planning or construction phases, and hundreds of users from around the world. Progress from concepts to realities is continuous as the scientific program, already strong in many diverse areas, moves in new directions to meet the needs of researchers into the next century. ALS staff members who develop and maintain the infrastructure for this research are similarly unwilling to rest on their laurels. As a result, the quality of the photon beams the authors deliver, as well as the support they provide to users, continues to improve. The ALS Activity Report is designed to share the results of these efforts in an accessible form for a broad audience. The Scientific Program section, while not comprehensive, shares the breadth, variety, and interest of recent research at the ALS. (The Compendium of User Abstracts and Technical Reports provides a more comprehensive and more technical view.) The Facility Report highlights progress in operations, ongoing accelerator research and development, and beamline instrumentation efforts. Although these Activity Report sections are separate, in practice the achievements of staff and users at the ALS are inseparable. User-staff collaboration is essential as they strive to meet the needs of the user community and to continue the ALS's success as a premier research facility.

  3. Advantages and limitations of nuclear physics experiments at an ISIS-class spallation neutron source

    NASA Astrophysics Data System (ADS)

    Mocko, M.; Muhrer, G.; Tovesson, F.

    2008-05-01

    Nuclear physics experiments have a long history of being conducted on spallation neutron sources. Like other experiments, these measurements take advantage of the identification of the incident neutron energy by the time-of-flight (ToF) technique. However, in some ways these experiments are often in direct conflict with other experiments. Especially in large (ISIS or SNS class) facilities, the design of the source often reflects a compromise between different experimental needs and requirements. It has been a long standing question for nuclear physics experiments how limiting these compromises are and how they can be dealt with. We have therefore calculated the incident neutron energy spectrum, along with the gamma background spectrum, for flight path (FP) 5 at the Los Alamos Neutron Science Center (LANSCE) Manuel Lujan Jr. Neutron Scattering Center (Lujan Center) including a detailed evaluation of the signal shape. We will discuss the advantages and limitations of the nuclear physics experiments at FP-5 in the light of our results.

  4. A HIGH CURRENT DENSITY LI+ ALUMINO-SILICATE ION SOURCE FOR TARGET HEATING EXPERIMENTS

    SciTech Connect

    Roy, Prabir K.; Greenway, Wayne G.; Kwan, Joe W.; Seidl, Peter A.; Waldron, William L.

    2011-03-23

    The NDCX-II accelerator for target heating experiments has been designed to use a large diameter ({approx_equal} 10.9 cm) Li{sup +} doped alumino-silicate source with a pulse duration of 0.5 {micro}s, and beam current of {approx_equal} 93 mA. Characterization of a prototype lithium alumino-silicate sources is presented. Using 6.35mm diameter prototype emitters (coated on a {approx_equal} 75% porous tungsten substrate), at a temperature of {approx_equal} 1275 C, a space-charge limited Li{sup +} beam current density of {approx_equal} 1 mA/cm{sup 2} was measured. At higher extraction voltage, the source is emission limited at around {approx_equal} 1.5 mA/cm{sup 2}, weakly dependent on the applied voltage. The lifetime of the ion source is {approx_equal} 50 hours while pulsing the extraction voltage at 2 to 3 times per minute. Measurements show that the life time of the ion source does not depend only on beam current extraction, and lithium loss may be dominated by neutral loss or by evaporation. The life time of a source is around {ge} 10 hours in a DC mode extraction, and the extracted charge is {approx_equal} 75% of the available Li in the sample. It is inferred that pulsed heating may increase the life time of a source.

  5. Visual Experience Modulates Spatio-Temporal Dynamics of Circuit Activation

    PubMed Central

    Wang, Lang; Fontanini, Alfredo; Maffei, Arianna

    2011-01-01

    Persistent reduction in sensory drive in early development results in multiple plastic changes of different cortical synapses. How these experience-dependent modifications affect the spatio-temporal dynamics of signal propagation in neocortical circuits is poorly understood. Here we demonstrate that brief visual deprivation significantly affects the propagation of electrical signals in the primary visual cortex. The spatio-temporal spread of circuit activation upon direct stimulation of its input layer (Layer 4) is reduced, as is the activation of L2/3 – the main recipient of the output from L4. Our data suggest that the decrease in spatio-temporal activation of L2/3 depends on reduced L4 output, and is not intrinsically generated within L2/3. The data shown here suggest that changes in the synaptic components of the visual cortical circuit result not only in alteration of local integration of excitatory and inhibitory inputs, but also in a significant decrease in overall circuit activation. Furthermore, our data indicate a differential effect of visual deprivation on L4 and L2/3, suggesting that while feedforward activation of L2/3 is reduced, its activation by long range, within layer inputs is unaltered. Thus, brief visual deprivation induces experience-dependent circuit re-organization by modulating not only circuit excitability, but also the spatio-temporal patterns of cortical activation within and between layers. PMID:21743804

  6. MIT Middeck Active Control Experiment (MACE): noncollocated payload pointing control

    NASA Astrophysics Data System (ADS)

    MacMartin, Douglas G.; Miller, David W.

    1993-09-01

    The Middeck Active Control Experiment is a space shuttle flight experiment intended to demonstrate high authority active structural control in zero gravity conditions. The prediction of on-orbit closed-loop dynamics is based on analysis and ground testing. The MACE test article is representative of multiple payload platforms, and includes two 2-axis gimballing payloads connected by a flexible bus. The goal of active control is to maintain pointing accuracy of one payload, while the remaining payload is moving independently. Current control results on the ground test article are presented. Multiple input, multiple output controllers are designed based on high order measurement based models. Linear Quadratic Gaussian controllers yield reasonable performance. At high authority, however, these controllers destabilize the actual structure, due to parametric errors in the control design model. A robust control design procedure is required to yield high performance in the presence of these errors.

  7. New conditioning procedure derived from operating experience with the Common Long-Pulse Ion Source

    SciTech Connect

    Scoville, B.G.; Madruga, M.; Hong, R.M.; Phillips, J.C.

    1993-10-01

    The DIII-D neutral beam system utilizes an 80 kV version of the Common Long-Pulse Ion Source designed by Lawrence Berkeley Laboratories (LBL) and originally built by RCA. Eight of these ion sources are mounted on four beamlines to provide a total of 20 MW of injected deuterium neutral power to the DIII-D tokamak. To support the DIII-D one-shift operation, neutral beams must be readied in a relatively short period of time each day, typically one hour. During non-operating periods conditioning time for the ion sources is limited, due to the costs of associated support services and the need to perform corrective and preventive maintenance. The experience gained over a six year period has resulted in finely tuned procedures for the conditioning and operation of these ion sources. Recently, an ion source was conditioned which had been accidentally filled with water for several days, resulting in surface corrosion and deconditioning of the grids and surfaces. The method of successful recovery along with data, experience and procedures derived this event and normal operations will be detailed and discussed.

  8. Source characterization and modeling development for monoenergetic-proton radiography experiments on OMEGA

    SciTech Connect

    Manuel, M. J.-E.; Zylstra, A. B.; Rinderknecht, H. G.; Casey, D. T.; Rosenberg, M. J.; Sinenian, N.; Li, C. K.; Frenje, J. A.; Seguin, F. H.; Petrasso, R. D.

    2012-06-15

    A monoenergetic proton source has been characterized and a modeling tool developed for proton radiography experiments at the OMEGA [T. R. Boehly et al., Opt. Comm. 133, 495 (1997)] laser facility. Multiple diagnostics were fielded to measure global isotropy levels in proton fluence and images of the proton source itself provided information on local uniformity relevant to proton radiography experiments. Global fluence uniformity was assessed by multiple yield diagnostics and deviations were calculated to be {approx}16% and {approx}26% of the mean for DD and D{sup 3}He fusion protons, respectively. From individual fluence images, it was found that the angular frequencies of Greater-Than-Or-Equivalent-To 50 rad{sup -1} contributed less than a few percent to local nonuniformity levels. A model was constructed using the Geant4 [S. Agostinelli et al., Nuc. Inst. Meth. A 506, 250 (2003)] framework to simulate proton radiography experiments. The simulation implements realistic source parameters and various target geometries. The model was benchmarked with the radiographs of cold-matter targets to within experimental accuracy. To validate the use of this code, the cold-matter approximation for the scattering of fusion protons in plasma is discussed using a typical laser-foil experiment as an example case. It is shown that an analytic cold-matter approximation is accurate to within Less-Than-Or-Equivalent-To 10% of the analytic plasma model in the example scenario.

  9. Source characterization and modeling development for monoenergetic-proton radiography experiments on OMEGA

    NASA Astrophysics Data System (ADS)

    Manuel, M. J.-E.; Zylstra, A. B.; Rinderknecht, H. G.; Casey, D. T.; Rosenberg, M. J.; Sinenian, N.; Li, C. K.; Frenje, J. A.; Séguin, F. H.; Petrasso, R. D.

    2012-06-01

    A monoenergetic proton source has been characterized and a modeling tool developed for proton radiography experiments at the OMEGA [T. R. Boehly et al., Opt. Comm. 133, 495 (1997)], 10.1016/S0030-4018(96)00325-2 laser facility. Multiple diagnostics were fielded to measure global isotropy levels in proton fluence and images of the proton source itself provided information on local uniformity relevant to proton radiography experiments. Global fluence uniformity was assessed by multiple yield diagnostics and deviations were calculated to be ˜16% and ˜26% of the mean for DD and D3He fusion protons, respectively. From individual fluence images, it was found that the angular frequencies of ≳50 rad-1 contributed less than a few percent to local nonuniformity levels. A model was constructed using the Geant4 [S. Agostinelli et al., Nuc. Inst. Meth. A 506, 250 (2003)], 10.1016/S0168-9002(03)01368-8 framework to simulate proton radiography experiments. The simulation implements realistic source parameters and various target geometries. The model was benchmarked with the radiographs of cold-matter targets to within experimental accuracy. To validate the use of this code, the cold-matter approximation for the scattering of fusion protons in plasma is discussed using a typical laser-foil experiment as an example case. It is shown that an analytic cold-matter approximation is accurate to within ≲10% of the analytic plasma model in the example scenario.

  10. Performance of active vibration control technology: the ACTEX flight experiments

    NASA Astrophysics Data System (ADS)

    Nye, T. W.; Manning, R. A.; Qassim, K.

    1999-12-01

    This paper discusses the development and results of two intelligent structures space-flight experiments, each of which could affect architecture designs of future spacecraft. The first, the advanced controls technology experiment I (ACTEX I), is a variable stiffness tripod structure riding as a secondary payload on a classified spacecraft. It has been operating well past its expected life since becoming operational in 1996. Over 60 on-orbit experiments have been run on the ACTEX I flight experiment. These experiments form the basis for in-space controller design problems and for concluding lifetime/reliability data on the active control components. Transfer functions taken during the life of ACTEX I have shown consistent predictability and stability in structural behavior, including consistency with those measurements taken on the ground prior to a three year storage period and the launch event. ACTEX I can change its modal characteristics by employing its dynamic change mechanism that varies preloads in portions of its structure. Active control experiments have demonstrated maximum vibration reductions of 29 dB and 16 dB in the first two variable modes of the system, while operating over a remarkable on-orbit temperature range of -80 °C to 129 °C. The second experiment, ACTEX II, was successfully designed, ground-tested, and integrated on an experimental Department of Defense satellite prior to its loss during a launch vehicle failure in 1995. ACTEX II also had variable modal behavior by virtue of a two-axis gimbal and added challenges of structural flexibility by being a large deployable appendage. Although the loss of ACTEX II did not provide space environment experience, ground testing resulted in space qualifying the hardware and demonstrated 21 dB, 14 dB, and 8 dB reductions in amplitude of the first three primary structural modes. ACTEX II could use either active and/or passive techniques to affect vibration suppression. Both experiments trailblazed

  11. Point source moving above a finite impedance reflecting plane - Experiment and theory

    NASA Technical Reports Server (NTRS)

    Norum, T. D.; Liu, C. H.

    1978-01-01

    A widely used experimental version of the acoustic monopole consists of an acoustic driver of restricted opening forced by a discrete frequency oscillator. To investigate the effects of forward motion on this source, it was mounted above an automobile and driven over an asphalt surface at constant speed past a microphone array. The shapes of the received signal were compared to results computed from an analysis of a fluctuating-mass-type point source moving above a finite impedance reflecting plane. Good agreement was found between experiment and theory when a complex normal impedance representative of a fairly hard acoustic surface was used in the analysis.

  12. An active thermal control surfaces experiment. [spacecraft temperature determination

    NASA Technical Reports Server (NTRS)

    Wilkes, D. R.; Brown, M. J.

    1979-01-01

    An active flight experiment is described that has the objectives to determine the effects of the low earth natural environment and the Shuttle induced environment on selected thermal control and optical surfaces. The optical and thermal properties of test samples will be measured in-situ using an integrating sphere reflectrometer and using calorimetric methods. This experiment has been selected for the Long Duration Exposure Facility (LDEF) flight which will be carried to orbit by the NASA Space Shuttle. The LDEF will remain in orbit to be picked up by a later Shuttle mission and returned for postflight evaluation.

  13. Low-cost Active Structural Control Space Experiment (LASC)

    NASA Technical Reports Server (NTRS)

    Robinett, Rush; Bukley, Angelia P.

    1992-01-01

    The DOE Lab Director's Conference identified the need for the DOE National Laboratories to actively and aggressively pursue ways to apply DOE technology to problems of national need. Space structures are key elements of DOD and NASA space systems and a space technology area in which DOE can have a significant impact. LASC is a joint agency space technology experiment (DOD Phillips, NASA Marshall, and DOE Sandia). The topics are presented in viewgraph form and include the following: phase 4 investigator testbed; control of large flexible structures in orbit; INFLEX; Controls, Astrophysics; and structures experiments in space; SARSAT; and LASC mission objectives.

  14. Optical imaging of the prefrontal activity in joint attention experience

    PubMed Central

    Qiu, Lina; Zhang, Xiao; Li, Jun

    2015-01-01

    Functional near-infrared spectroscopy (fNIRS) was used to measure the prefrontal activity in joint attention experience. 16 healthy adults participated in the experiment in which 42 optical channels were fixed over the anterior prefrontal cortex (aPFC), dorsolateral prefrontal cortex (DLPFC), inferior frontal gyrus (IFG) and a small anterior portion of the superior temporal gyrus (STG). Video stimuli were used to engender joint or non-joint attention experience in observers. Cortical hemodynamic response and functional connectivity were measured and averaged across all subjects for each stimulus condition. Our data showed the activation in joint attention located in the aPFC and DLPFC bilaterally, but dominantly in the left hemisphere. This observation, together with the previous findings on infants and children, provides a clear developmental scenario on the prefrontal activation associated with joint attention process. In the case of non-joint attention condition, only a small region of the right DLPFC was activated. Functional connectivity was observed to be enhanced, but differently in joint and non-joint attention condition. PMID:26417513

  15. Exploring the Relationship between Certification Sources, Experience Levels, and Classroom Management Orientations of Classroom Teachers

    ERIC Educational Resources Information Center

    Ritter, Janice Toterhi; Hancock, Dawson R.

    2007-01-01

    Teachers continue to report that classroom management is one of their greatest challenges in the classroom. Classroom management involves teacher's efforts to oversee classroom activities such as learning, social interaction, and student behavior. In this study, we examined the relationship between sources of teachers' certification (traditional…

  16. Design of an intense ion source and LEBT for Jinping Underground Nuclear Astrophysics experiments

    NASA Astrophysics Data System (ADS)

    Wu, Q.; Sun, L. T.; Cui, B. Q.; Lian, G.; Yang, Y.; Ma, H. Y.; Tang, X. D.; Zhang, X. Z.; Zhang, Z. M.; Liu, W. P.

    2016-09-01

    The ongoing Jinping Underground Nuclear Astrophysics experiment (JUNA) will take the advantage of the ultralow background in China Jinping Underground Laboratory (CJPL), high current accelerator driven by on an ECR source and highly sensitive detector to study directly a number of important reactions for the first time within their relevant stellar energy range. A 2.45 GHz ECR ion source is one of its key components to provide 10 emA H+, 10 emA He+ and 2.0 emA He2+ beams for the study of (p,γ), (p,α), (α,p) and (α,γ) reactions in the first phase of the JUNA project. Ion beam is extracted from the source with energies up to 50 kV/q. The following low energy beam transport (LEBT) system transports and matches the ion beam from the exit of ion source to the acceleration tube (AT). The design status of the ECR ion source and LEBT system for the JUNA project are presented. The potential risks of the ion source are also discussed and analysed.

  17. NSLS 2007 Activity Report (National Synchrotron Light Source Activity Report 2007)

    SciTech Connect

    Miller ,L.; Nasta, K.

    2008-05-01

    The National Synchrotron Light Source is one of the world's most productive and cost-effective user facilities. With 2,219 individual users, about 100 more than last year, and a record-high 985 publications, 2007 was no exception. In addition to producing an impressive array of science highlights, which are included in this Activity Report, many NSLS users were honored this year for their scientific accomplishments. Throughout the year, there were major strides in the development of the scientific programs by strengthening strategic partnerships with major research resources and with the Center for Functional Nanomaterials (CFN). Of particular note, the Consortium for Materials Properties Research in Earth Sciences (COMPRES) received renewed funding for the next five years through the National Science Foundation. COMPRES operates four high-pressure NSLS beamlines--X17B2, X17B3, X17C, and U2A--and serves the earth science community as well as the rapidly expanding segment of researchers using high-pressure techniques in materials, chemical, and energy-related sciences. A joint appointment was made between the NSLS and Stony Brook University to further enhance interactions with COMPRES. There was major progress on two key beamline projects outlined in the Five-Year Strategic Plan: the X25 beamline upgrade and the construction of the X9 small angle scattering (SAXS) beamline. The X25 overhaul, which began with the installation of the in-vacuum mini-gap undulator (MGU) in January 2006, is now complete. X25 is once again the brightest beamline for macromolecular crystallography at the NSLS, and in tandem with the X29 undulator beamline, it will keep the NSLS at the cutting edge in this important area of research. Upgrade work associated with the new MGU and the front end for the X9 SAXS beamline--jointly developed by the NSLS and the CFN--also was completed. Beamline X9 will host the SAXS program that currently exists at beamline X21 and will provide new microbeam SAXS

  18. Specification of High Activity Gamma-Ray Sources.

    ERIC Educational Resources Information Center

    International Commission on Radiation Units and Measurements, Washington, DC.

    The report is concerned with making recommendations for the specifications of gamma ray sources, which relate to the quantity of radioactive material and the radiation emitted. Primary consideration is given to sources in teletherapy and to a lesser extent those used in industrial radiography and in irradiation units used in industry and research.…

  19. Active radiometric calorimeter for absolute calibration of radioactive sources

    NASA Astrophysics Data System (ADS)

    Stump, K. E.; DeWerd, L. A.; Rudman, D. A.; Schima, S. A.

    2005-03-01

    This report describes the design and initial noise floor measurements of a radiometric calorimeter designed to measure therapeutic medical radioactive sources. The instrument demonstrates a noise floor of approximately 2 nW. This low noise floor is achieved by using high temperature superconducting (HTS) transition edge sensor (TES) thermometers in a temperature-control feedback loop. This feedback loop will be used to provide absolute source calibrations based upon the electrical substitution method. Other unique features of the calorimeter are (a) its ability to change sources for calibration without disrupting the vacuum of the instrument, and (b) the ability to measure the emitted power of a source in addition to the total contained source power.

  20. Large-N Seismic Deployment at the Source Physics Experiment (SPE) Site

    NASA Astrophysics Data System (ADS)

    Chen, T.; Snelson, C. M.; Mellors, R. J.; Pitarka, A.

    2015-12-01

    The Source Physics Experiment (SPE) is multi-institutional and multi-disciplinary project that consists of a series of chemical explosion experiments at the Nevada National Security Site. The goal of SPE is to understand the complicated effect of earth structures on source energy partitioning and seismic wave propagation, develop and validate physics-based monitoring, and ultimately better discriminate low-yield nuclear explosions from background seismicity. Deployment of a large number of seismic sensors is planned for SPE to image the full 3-D wavefield with about 500 three-component sensors and 500 vertical component sensors. This large-N seismic deployment will operate near the site of SPE-5 shot for about one month, recording the SPE-5 shot, ambient noise, and additional controlled-sources. This presentation focuses on the design of the large-N seismic deployment. We show how we optimized the sensor layout based on the geological structure and experiment goals with a limited number of sensors. In addition, we will also show some preliminary record sections from deployment. This work was conducted under Contract No. DE-AC52-06NA25946 with the U.S. Department of Energy.

  1. A Drabkin energy filter for experiments at a spallation neutron source.

    SciTech Connect

    Parizzi, A. A.; Felcher, G. P.; Klose, F.

    2000-11-21

    We present a new approach for dynamic monochromatization of neutrons suitable for time-of-flight experiments at spallation neutron sources. The method requires polarized neutrons and is based on the Drabkin energy filter. In its initial application, this magnetic resonator device, consisting of a polarizer/analyzer system and a wavelength-dependent spin flipper, was proposed for extracting a narrow bandwidth from a broad bandwidth polarized neutron beam. At a spallation neutron source, wavelength is determined by time-of-flight (TOF) from the source to the detector. However, at each instant a spread of wavelengths is recorded due to the non-zero emission time of the source/moderator system. Particularly, high-intensity moderators for cold neutrons produce long ''tails'' in the intensity/time distribution for all wavelengths, degrading the resolution of the experiments. The Drabkin energy filter can be used to cut the neutron tails for all wavelengths, by drifting the resonance condition in synchronization with the TOF. Calculations show that the method is viable, and that substantial resolution gains are obtained by application to a TOF neutron reflectometer.

  2. Groundwater seepage landscapes from local or distal sources in experiments and on Mars

    NASA Astrophysics Data System (ADS)

    Marra, W. A.; McLelland, S. J.; Parsons, D. R.; Murphy, B. J.; Hauber, E.; Kleinhans, M. G.

    2015-02-01

    Theater-headed valleys can form due to groundwater sapping, but these valleys could also be the result of knick-point (waterfall) erosion generated by overland flow. This morphological ambiguity hampers the interpretation of such valleys on Mars, especially due to insufficient knowledge of material properties, but the climate implications are quite different. Instead of single-valley morphology, metrics of the entire landscape may provide diagnostic insight in the formative hydrological conditions. However, flow patterns and the resulting landscapes are different for different sources of groundwater and poorly understood. We aim to increase our understanding of the formation of the entire landscapes by sapping from different sources of groundwater and to provide a framework of landscape metrics of such systems to aid interpretation of such landscapes. We study sapping from local and distal sources of groundwater in sandbox experiments and combine our results with previous experiments. Key results are that groundwater piracy acts on distally-fed valleys, which results in a sparsely dissected landscape of many small and a few large valleys while locally-fed valleys result in a densely dissected landscape. In addition, distally-fed valleys grow into the direction of the groundwater source while locally-fed channels grow in a broad range of directions and have a strong tendency to bifurcate, particularly on flat horizontal surfaces. As an example, we apply these results to two Martian cases. The valleys of Louros Valles show properties of sapping by a local source and Nirgal Vallis shows evidence of a distal source, which is likely groundwater from Tharsis.

  3. Dual diagnosis, as described by those who experience the disorder: using the Internet as a source of data.

    PubMed

    Edward, Karen-Leigh; Robins, Alan

    2012-12-01

    The complexity of providing treatment for people with dual diagnosis is well recognized. For the purpose of this paper, the World Health Organization definition of dual diagnosis was used; that is, a person diagnosed with an alcohol or drug use problem in addition to mental illness. This research explored the personal narratives of those who experience dual diagnosis using the Internet as a data source. An important consideration in using the Internet as a data source was that Web forums can offer a sense of anonymity, allowing people to share very detailed and personal information, and providing a rich source of qualitative data. The results produced five emergent themes: spiralling out of control - again!, getting help and giving support, treating both the addiction and mental illness, having meaning and being active, and being honest with self and others. The results indicate that individuals who experience dual diagnosis are often left to navigate their personal treatment requirements across two diverse systems, and were generally not satisfied with the conflictual advice received across these two systems (i.e. alcohol and other drug and mental health services). This study has produced valuable insights related to consumer-perceived service barriers and enablers. PMID:22830579

  4. Report on Active and Planned Spacecraft and Experiments. [bibliographies

    NASA Technical Reports Server (NTRS)

    Vostreys, R. W. (Editor); Horwitz, R. (Editor)

    1979-01-01

    Information concerning concerning active and planned spacecraft and experiments known to the National Space Science Data Center are included. The information contains a wide range of disciplines: astronomy, earth sciences, meteorology, planetary sciences, aeronomy, particles and fields, solar physics, life sciences, and material sciences. These spacecraft projects represent the efforts and funding of individual countries as well as cooperative arrangements among different countries. Approximately 850 articles are included.

  5. Preliminary experiments on active control of fan noise from a turbofan engine

    NASA Technical Reports Server (NTRS)

    Thomas, R. H.; Burdisso, R. A.; Fuller, C. R.; O'Brien, W. F.

    1993-01-01

    In the preliminary experiments reported here, active acoustic sources positioned around the circumference of a turbofan engine were used to control the fan noise radiated forward through the inlet. The main objective was to demonstrate the potential of active techniques to alleviate the noise pollution that will be produced by the next generation of larger engines. A reduction of up to 19 dB in the radiation directivity was demonstrated in a zone that encompasses a 30-deg angle, near the error sensor, while spillover effects were observed toward the lateral direction. The simultaneous control of two tones was also demonstrated using two identical controllers in a parallel control configuration.

  6. Nature experience reduces rumination and subgenual prefrontal cortex activation

    PubMed Central

    Bratman, Gregory N.; Hamilton, J. Paul; Hahn, Kevin S.; Daily, Gretchen C.; Gross, James J.

    2015-01-01

    Urbanization has many benefits, but it also is associated with increased levels of mental illness, including depression. It has been suggested that decreased nature experience may help to explain the link between urbanization and mental illness. This suggestion is supported by a growing body of correlational and experimental evidence, which raises a further question: what mechanism(s) link decreased nature experience to the development of mental illness? One such mechanism might be the impact of nature exposure on rumination, a maladaptive pattern of self-referential thought that is associated with heightened risk for depression and other mental illnesses. We show in healthy participants that a brief nature experience, a 90-min walk in a natural setting, decreases both self-reported rumination and neural activity in the subgenual prefrontal cortex (sgPFC), whereas a 90-min walk in an urban setting has no such effects on self-reported rumination or neural activity. In other studies, the sgPFC has been associated with a self-focused behavioral withdrawal linked to rumination in both depressed and healthy individuals. This study reveals a pathway by which nature experience may improve mental well-being and suggests that accessible natural areas within urban contexts may be a critical resource for mental health in our rapidly urbanizing world. PMID:26124129

  7. Nature experience reduces rumination and subgenual prefrontal cortex activation.

    PubMed

    Bratman, Gregory N; Hamilton, J Paul; Hahn, Kevin S; Daily, Gretchen C; Gross, James J

    2015-07-14

    Urbanization has many benefits, but it also is associated with increased levels of mental illness, including depression. It has been suggested that decreased nature experience may help to explain the link between urbanization and mental illness. This suggestion is supported by a growing body of correlational and experimental evidence, which raises a further question: what mechanism(s) link decreased nature experience to the development of mental illness? One such mechanism might be the impact of nature exposure on rumination, a maladaptive pattern of self-referential thought that is associated with heightened risk for depression and other mental illnesses. We show in healthy participants that a brief nature experience, a 90-min walk in a natural setting, decreases both self-reported rumination and neural activity in the subgenual prefrontal cortex (sgPFC), whereas a 90-min walk in an urban setting has no such effects on self-reported rumination or neural activity. In other studies, the sgPFC has been associated with a self-focused behavioral withdrawal linked to rumination in both depressed and healthy individuals. This study reveals a pathway by which nature experience may improve mental well-being and suggests that accessible natural areas within urban contexts may be a critical resource for mental health in our rapidly urbanizing world. PMID:26124129

  8. Design considerations for neutron activation and neutron source strength monitors for ITER

    SciTech Connect

    Barnes, C.W.; Jassby, D.L.; LeMunyan, G.; Roquemore, A.L.; Walker, C.

    1997-12-31

    The International Thermonuclear Experimental Reactor will require highly accurate measurements of fusion power production in time, space, and energy. Spectrometers in the neutron camera could do it all, but experience has taught us that multiple methods with redundancy and complementary uncertainties are needed. Previously, conceptual designs have been presented for time-integrated neutron activation and time-dependent neutron source strength monitors, both of which will be important parts of the integrated suite of neutron diagnostics for this purpose. The primary goals of the neutron activation system are: to maintain a robust relative measure of fusion energy production with stability and wide dynamic range; to enable an accurate absolute calibration of fusion power using neutronic techniques as successfully demonstrated on JET and TFTR; and to provide a flexible system for materials testing. The greatest difficulty is that the irradiation locations need to be close to plasma with a wide field of view. The routing of the pneumatic system is difficult because of minimum radius of curvature requirements and because of the careful need for containment of the tritium and activated air. The neutron source strength system needs to provide real-time source strength vs. time with {approximately}1 ms resolution and wide dynamic range in a robust and reliable manner with the capability to be absolutely calibrated by in-situ neutron sources as done on TFTR, JT-60U, and JET. In this paper a more detailed look at the expected neutron flux field around ITER is folded into a more complete design of the fission chamber system.

  9. Decision-Making in Flight with Different Convective Weather Information Sources: Preliminary Results from the Langley CoWS Experiment (COnvective Weather Sources)

    NASA Technical Reports Server (NTRS)

    Chamberlain, Jim; Latorella, Kara

    2003-01-01

    This viewgraph presentation provides information on an airborne experiment designed to test the decision making of pilots receiving different sources of meteorological data. The presentation covers the equipment used in the COnvective Weather Sources (CoWS) Experiment), including the information system and display devices available to some of the subjects. It also describes the experiment, which featured teams of general aviation pilots, who were onboard but did not actually fly the aircraft used in the experiment. The presentation includes the results of a survey of the subjects' confidence.

  10. REM sleep depotentiates amygdala activity to previous emotional experiences.

    PubMed

    van der Helm, Els; Yao, Justin; Dutt, Shubir; Rao, Vikram; Saletin, Jared M; Walker, Matthew P

    2011-12-01

    Clinical evidence suggests a potentially causal interaction between sleep and affective brain function; nearly all mood disorders display co-occurring sleep abnormalities, commonly involving rapid-eye movement (REM) sleep. Building on this clinical evidence, recent neurobiological frameworks have hypothesized a benefit of REM sleep in palliatively decreasing next-day brain reactivity to recent waking emotional experiences. Specifically, the marked suppression of central adrenergic neurotransmitters during REM (commonly implicated in arousal and stress), coupled with activation in amygdala-hippocampal networks that encode salient events, is proposed to (re)process and depotentiate previous affective experiences, decreasing their emotional intensity. In contrast, the failure of such adrenergic reduction during REM sleep has been described in anxiety disorders, indexed by persistent high-frequency electroencephalographic (EEG) activity (>30 Hz); a candidate factor contributing to hyperarousal and exaggerated amygdala reactivity. Despite these neurobiological frameworks, and their predictions, the proposed benefit of REM sleep physiology in depotentiating neural and behavioral responsivity to prior emotional events remains unknown. Here, we demonstrate that REM sleep physiology is associated with an overnight dissipation of amygdala activity in response to previous emotional experiences, altering functional connectivity and reducing next-day subjective emotionality. PMID:22119526

  11. Utilization of the intense pulsed neutron source (IPNS) at Argonne National Laboratory for neutron activation analysis

    SciTech Connect

    Heinrich, R.R.; Greenwood, L.R.; Popek, R.J.; Schulke, A.W. Jr.

    1983-01-01

    The Intense Pulsed Neutron Source (IPNS) neutron scattering facility (NSF) has been investigated for its applicability to neutron activation analysis. A polyethylene insert has been added to the vertical hole VT3 which enhances the thermal neutron flux by a factor of two. The neutron spectral distribution at this position has been measured by the multiple-foil technique which utilized 28 activation reactions and the STAYSL computer code. The validity of this spectral measurement was tested by two irradiations of National Bureau of Standards SRM-1571 (orchard leaves), SRM-1575 (pine needles), and SRM-1645 (river sediment). The average thermal neutron flux for these irradiations normalized to 10 ..mu..amp proton beam is 4.0 x 10/sup 11/ n/cm/sup 2/-s. Concentrations of nine trace elements in each of these SRMs have been determined by gamma-ray spectrometry. Agreement of measured values to certified values is demonstrated to be within experiment error.

  12. Preseismic Velocity Changes Observed from Active Source Monitoringat the Parkfield SAFOD Drill Site

    SciTech Connect

    Daley, Thomas; Niu, Fenglin; Silver, Paul G.; Daley, Thomas M.; Cheng, Xin; Majer, Ernest L.

    2008-06-10

    Measuring stress changes within seismically active fault zones has been a long-sought goal of seismology. Here we show that such stress changes are measurable by exploiting the stress dependence of seismic wave speed from an active source cross-well experiment conducted at the SAFOD drill site. Over a two-month period we observed an excellent anti-correlation between changes in the time required for an S wave to travel through the rock along a fixed pathway--a few microseconds--and variations in barometric pressure. We also observed two large excursions in the traveltime data that are coincident with two earthquakes that are among those predicted to produce the largest coseismic stress changes at SAFOD. Interestingly, the two excursions started approximately 10 and 2 hours before the events, respectively, suggesting that they may be related to pre-rupture stress induced changes in crack properties, as observed in early laboratory studies.

  13. Undergraduate research experiences support science career decisions and active learning.

    PubMed

    Lopatto, David

    2007-01-01

    The present study examined the reliability of student evaluations of summer undergraduate research experiences using the SURE (Survey of Undergraduate Research Experiences) and a follow-up survey disseminated 9 mo later. The survey further examines the hypothesis that undergraduate research enhances the educational experience of science undergraduates, attracts and retains talented students to careers in science, and acts as a pathway for minority students into science careers. Undergraduates participated in an online survey on the benefits of undergraduate research experiences. Participants indicated gains on 20 potential benefits and reported on career plans. Most of the participants began or continued to plan for postgraduate education in the sciences. A small group of students who discontinued their plans for postgraduate science education reported significantly lower gains than continuing students. Women and men reported similar levels of benefits and similar patterns of career plans. Undergraduate researchers from underrepresented groups reported higher learning gains than comparison students. The results replicated previously reported data from this survey. The follow-up survey indicated that students reported gains in independence, intrinsic motivation to learn, and active participation in courses taken after the summer undergraduate research experience. PMID:18056301

  14. Experience and Lessons Learned from Conditioning of Spent Sealed Sources in Singapore - 13107

    SciTech Connect

    Hong, Dae-Seok; Kang, Il-Sik; Jang, Kyung-Duk; Jang, Won-Hyuk; Hoo, Wee-Teck

    2013-07-01

    In 2010, IAEA requested KAERI (Korea Atomic Energy Research Institute) to support Singapore for conditioning spent sealed sources. Those that had been used for a lightning conductor, check source, or smoke detector, various sealed sources had been collected and stored by the NEA (National Environment Agency) in Singapore. Based on experiences for the conditioning of Ra-226 sources in some Asian countries since 2000, KAERI sent an expert team to Singapore for the safe management of spent sealed sources in 2011. As a result of the conditioning, about 575.21 mCi of Am-241, Ra-226, Co-60, and Sr-90 were safely conditioned in 3 concrete lining drums with the cooperation of the KAERI expert team, the IAEA supervisor, the NEA staff and local laborers in Singapore. Some lessons were learned during the operation: (1) preparations by a local authority are very helpful for an efficient operation, (2) a preliminary inspection by an expert team is helpful for the operation, (3) brief reports before and after daily operation are useful for communication, and (4) a training opportunity is required for the sustainability of the expert team. (authors)

  15. Volcanic eruption source parameters from active and passive microwave sensors

    NASA Astrophysics Data System (ADS)

    Montopoli, Mario; Marzano, Frank S.; Cimini, Domenico; Mereu, Luigi

    2016-04-01

    It is well known, in the volcanology community, that precise information of the source parameters characterising an eruption are of predominant interest for the initialization of the Volcanic Transport and Dispersion Models (VTDM). Source parameters of main interest would be the top altitude of the volcanic plume, the flux of the mass ejected at the emission source, which is strictly related to the cloud top altitude, the distribution of volcanic mass concentration along the vertical column as well as the duration of the eruption and the erupted volume. Usually, the combination of a-posteriori field and numerical studies allow constraining the eruption source parameters for a given volcanic event thus making possible the forecast of ash dispersion and deposition from future volcanic eruptions. So far, remote sensors working at visible and infrared channels (cameras and radiometers) have been mainly used to detect, track and provide estimates of the concentration content and the prevailing size of the particles propagating within the ash clouds up to several thousand of kilometres far from the source as well as track back, a-posteriori, the accuracy of the VATDM outputs thus testing the initial choice made for the source parameters. Acoustic wave (infrasound) and microwave fixed scan radar (voldorad) were also used to infer source parameters. In this work we want to put our attention on the role of sensors operating at microwave wavelengths as complementary tools for the real time estimations of source parameters. Microwaves can benefit of the operability during night and day and a relatively negligible sensitivity to the presence of clouds (non precipitating weather clouds) at the cost of a limited coverage and larger spatial resolution when compared with infrared sensors. Thanks to the aforementioned advantages, the products from microwaves sensors are expected to be sensible mostly to the whole path traversed along the tephra cloud making microwaves particularly

  16. Development of a compact laser-produced plasma soft X-ray source for radiobiology experiments

    NASA Astrophysics Data System (ADS)

    Adjei, Daniel; Ayele, Mesfin Getachew; Wachulak, Przemyslaw; Bartnik, Andrzej; Wegrzynski, Łukasz; Fiedorowicz, Henryk; Vyšín, Luděk; Wiechec, Anna; Lekki, Janusz; Kwiatek, Wojciech M.; Pina, Ladislav; Davídková, Marie; Juha, Libor

    2015-12-01

    A desk-top laser-produced plasma (LPP) source of soft X-rays (SXR) has been developed for radiobiology research. The source is based on a double-stream gas puff target, irradiated with the focused beam of a commercial Nd:YAG laser. The source has been optimized to get a maximum photon emission from LPP in the X-ray "water window" spectral wavelength range from 2.3 nm (i.e., an absorption edge of oxygen) to 4.4 nm (i.e., an absorption edge of carbon) (280-540 eV in photon energy units) by using argon gas-puff target and spectral filtering by free-standing thin foils. The present source delivers nanosecond pulses of soft X-rays at a fluence of about 4.2 × 103 photons/μm2/pulse on a sample placed inside the vacuum chamber. In this paper, the source design, radiation output characterization measurements and initial irradiation experiments are described. The source can be useful in addressing observations related to biomolecular, cellular and organisms' sensitivity to pulsed radiation in the "water window", where carbon atoms absorb X-rays more strongly than the oxygen, mostly present in water. The combination of the SXR source and the radiobiology irradiation layout, reported in this article, make possible a systematic investigation of relationships between direct and indirect action of ionizing radiation, an increase of a local dose in carbon-rich compartments of the cell (e.g., lipid membranes), an experimental estimation of a particular role of the Auger effect (in particular in carbon atoms) in the damage to biological systems, and the study of ionization/excitation-density (LET - Linear Energy Transfer) and dose-rate effects in radiobiology.

  17. High Resolution Regional Attenuation for the Source Physics Experiment Using Multiphase Inversion

    NASA Astrophysics Data System (ADS)

    Pyle, M. L.; Walter, W. R.; Pasyanos, M.

    2015-12-01

    Seismic event amplitude measurement plays a critical role in the discrimination between earthquakes and explosions. An accurate 2D model of the attenuation experienced by seismic waves traveling through the earth is especially important for reasonable amplitude estimation at small event-to-station distances. In this study, we investigate the detailed attenuation structure in the region around southern Nevada as part of the Source Physics Experiment (SPE). The SPE consists of a series of chemical explosions at the Nevada National Security Site (NNSS) designed to improve our understanding of explosion physics and enable better modeling of explosion sources. Phase I of the SPE is currently being conducted in the Climax Stock Granite and Phase II will move to a contrasting dry alluvium geology. A high-resolution attenuation model will aid in the modeling efforts of these experiments. To improve our understanding of the propagation of energy from sources in the area to local and regional stations in the western U.S., we invert regional phases Pn, Pg, and Lg to examine the crust and upper mantle attenuation structure of southern Nevada and the surrounding region. We consider observed amplitudes as the frequency-domain product of a source term, a site term, a geometrical spreading term, and an attenuation (Q) term (e.g. Walter and Taylor, 2001). Initially we take a staged approach to first determine the best 1D Q values; next we calculate source terms using the 1D model, and finally we solve for the best 2D Q parameters and site terms considering all frequencies simultaneously. Our preliminary results agree generally with those from the continent-wide study by Pasyanos (2013). With additional data we are working to develop a more detailed and higher frequency model of the region as well as move toward a fully non-linear inversion.

  18. Imaging magnetic sources in the presence of superconducting surfaces : model&experiment

    SciTech Connect

    Matlachov, A. N.; Espy, M. A.; Volegov, P.; Flynn, E. R.; Maharajh, K.; Kraus, Robert H., Jr.

    2001-01-01

    The forward physics model describing the effect of a superconducting surface on the magnetic field distribution resulting from specific magnetic sources has numerous applications ranging from basic physics experiments to large superconducting magnets used in energy storage and magnetic resonance imaging. In this paper, we describe the novel application of a superconducting imaging surface (SIS) to enhance the performance of systems designed to directly observe and localize human brain function. Magnetoencephalography (MEG) measures the weak magnetic fields emanating from the brain as a direct consequence of the neuronal currents resulting from brain function[1]. The extraordinarily weak magnetic fields are measured by an array of SQUID (Superconducting QUantum Interference Device) sensors. The position and vector characteristics of these neuronal sources can be estimated from the inverse solution of the field distribution at the surface of the head. In addition, MEG temporal resolution is unsurpassed by any other method currently used for brain imaging. Although MEG source reconstruction is limited by solutions of the electromagnetic inverse problem, constraints used for source localization produce reliable results. A novel MEG system incorporating a SIS has been designed and built at Los Alamos with the goal of dramatically improving source localization accuracy while mitigating limitations of current systems (e.g. low signal-to-noise, cost, bulk). We incorporate shielding and source field measurement into an integrated design and combine the latest SQUID and data acquisition technology. The Los Alamos MEG system is based on the principal that fields from nearby sources measured by a SQUID sensor array while the SIS simultaneously shields the sensor array from distant noise fields. In general, Meissner currents flow in the surface of superconductors, preventing any significant penetration of magnetic fields. A hemispherical SIS with a brim, or helmet, surrounds

  19. Calorimetric method for determination of {sup 51}Cr neutrino source activity

    SciTech Connect

    Veretenkin, E. P. Gavrin, V. N.; Danshin, S. N.; Ibragimova, T. V.; Kozlova, Yu. P.; Mirmov, I. N.

    2015-12-15

    Experimental study of nonstandard neutrino properties using high-intensity artificial neutrino sources requires the activity of the sources to be determined with high accuracy. In the BEST project, a calorimetric system for measurement of the activity of high-intensity (a few MCi) neutrino sources based on {sup 51}Cr with an accuracy of 0.5–1% is created. In the paper, the main factors affecting the accuracy of determining the neutrino source activity are discussed. The calorimetric system design and the calibration results using a thermal simulator of the source are presented.

  20. The MODE family of on-orbit experiments: The Middeck Active Control Experiment (MACE)

    NASA Technical Reports Server (NTRS)

    Crawley, Edward F.; Miller, David W.; Deluis, Javier; Waldman, Mel; Bicos, Andy

    1990-01-01

    A flight experiment entitled the Middeck Active Control Experiment (MACE), proposed by the Space Engineering Research Center (SERC) at the Massachusetts Institute of Technology, is described. This is the second in a family of flight experiments being developed at MIT. The first is the Middeck 0-Gravity Dynamics Experiment (MODE) which investigates the nonlinear behavior of contained fluids and truss structures in zero gravity. The objective of the MACE program is to investigate and validate the modeling of the dynamics of an actively controlled flexible, articulating, multibody platform free floating in zero gravity. A rationale and experimental approach for the program are presented. The rationale shows that on-orbit testing, coupled with ground testing and a strong analytical program, is necessary in order to fully understand both how flexibility of the platform affects the pointing problem, as well as how gravity perturbs this structural flexibility causing deviations between 1- and 0-gravity behavior. The experimental approach captures the essential physics of multibody platforms, by identifying the appropriate attributes, tests, and performance metrics of the test article and defines the tests required to successfully validate the analytical framework.

  1. The MODE family of on-orbit experiments: The Middeck Active Control Experiment (MACE)

    NASA Astrophysics Data System (ADS)

    Crawley, Edward F.; Miller, David W.; Deluis, Javier; Waldman, Mel; Bicos, Andy

    1990-12-01

    A flight experiment entitled the Middeck Active Control Experiment (MACE), proposed by the Space Engineering Research Center (SERC) at the Massachusetts Institute of Technology, is described. This is the second in a family of flight experiments being developed at MIT. The first is the Middeck 0-Gravity Dynamics Experiment (MODE) which investigates the nonlinear behavior of contained fluids and truss structures in zero gravity. The objective of the MACE program is to investigate and validate the modeling of the dynamics of an actively controlled flexible, articulating, multibody platform free floating in zero gravity. A rationale and experimental approach for the program are presented. The rationale shows that on-orbit testing, coupled with ground testing and a strong analytical program, is necessary in order to fully understand both how flexibility of the platform affects the pointing problem, as well as how gravity perturbs this structural flexibility causing deviations between 1- and 0-gravity behavior. The experimental approach captures the essential physics of multibody platforms, by identifying the appropriate attributes, tests, and performance metrics of the test article and defines the tests required to successfully validate the analytical framework.

  2. Nonpoint sources as external threats to coastal water quality: lessons from Park Service experience

    USGS Publications Warehouse

    Burroughs, R.H.

    1993-01-01

    Program design for nonpoint source control was considered through an analogous problem, external threats to national parks. Nonpoint sources are diffuse land activities that degrade water quality, and recent federal legislation seeks to limit them in coastal areas. External threats occur outside a park boundary but affect the purposes for, or resources within, a park. They have been subject to federal management for many decades. Nonpoint sources are a class of external threat. Therefore, programs to limit them should consider techniques used in part protection. These park techniques include 'hard approaches', which rely on power, usually through legal devices, and 'soft approaches', which utilize shared values and objectives. A linked approach, as exemplified at the Cape Cod National Seashore, appears most promising. In a linked approach, if a soft approach fails, the manager of the protected unit is empowered to take an alternative hard action to protect the resource.

  3. Information-Driven Active Audio-Visual Source Localization.

    PubMed

    Schult, Niclas; Reineking, Thomas; Kluss, Thorsten; Zetzsche, Christoph

    2015-01-01

    We present a system for sensorimotor audio-visual source localization on a mobile robot. We utilize a particle filter for the combination of audio-visual information and for the temporal integration of consecutive measurements. Although the system only measures the current direction of the source, the position of the source can be estimated because the robot is able to move and can therefore obtain measurements from different directions. These actions by the robot successively reduce uncertainty about the source's position. An information gain mechanism is used for selecting the most informative actions in order to minimize the number of actions required to achieve accurate and precise position estimates in azimuth and distance. We show that this mechanism is an efficient solution to the action selection problem for source localization, and that it is able to produce precise position estimates despite simplified unisensory preprocessing. Because of the robot's mobility, this approach is suitable for use in complex and cluttered environments. We present qualitative and quantitative results of the system's performance and discuss possible areas of application. PMID:26327619

  4. Data Release Report for Source Physics Experiment 1 (SPE-1), Nevada National Security Site

    SciTech Connect

    Townsend, Margaret; Mercadente, Jennifer

    2014-04-28

    The first Source Physics Experiment shot (SPE-1) was conducted in May 2011. The explosive source was a ~100-kilogram TNT-equivalent chemical set at a depth of 60 meters. It was recorded by an extensive set of instrumentation that includes sensors both at near-field (less than 100 meters) and far-field (more than 100 meters) distances. The near-field instruments consisted of three-component accelerometers deployed in boreholes around the shot and a set of singlecomponent vertical accelerometers on the surface. The far-field network comprised a variety of seismic and acoustic sensors, including short-period geophones, broadband seismometers, three-component accelerometers, and rotational seismometers at distances of 100 meters to 25 kilometers. This report coincides with the release of these data for analysts and organizations that are not participants in this program. This report describes the first Source Physics Experiment and the various types of near-field and far-field data that are available.

  5. Predicting Activation of Experiments Inside the Annular Core Research Reactor

    SciTech Connect

    Greenberg, Joseph Isaac

    2015-11-01

    The objective of this thesis is to create a program to quickly estimate the radioactivity and decay of experiments conducted inside of the Annular Core Research Reactor at Sandia National Laboratories and eliminate the need for users to write code. This is achieved by model the neutron fluxes in the reactor’s central cavity where experiments are conducted for 4 different neutron spectra using MCNP. The desired neutron spectrum, experiment material composition, and reactor power level are then input into CINDER2008 burnup code to obtain activation and decay information for every isotope generated. DREAD creates all of the files required for CINDER2008 through user selected inputs in a graphical user interface and executes the program for the user and displays the resulting estimation for dose rate at various distances. The DREAD program was validated by weighing and measuring various experiments in the different spectra and then collecting dose rate information after they were irradiated and comparing it to the dose rates that DREAD predicted. The program provides results with an average of 17% higher estimates than the actual values and takes seconds to execute.

  6. Dashboard applications to monitor experiment activities at sites

    NASA Astrophysics Data System (ADS)

    Andreeva, Julia; Belforte, Stefano; Boehm, Max; Casajus, Adrian; Flix, Josep; Gaidioz, Benjamin; Grigoras, Costin; Kokoszkiewicz, Lukasz; Lanciotti, Elisa; Rocha, Ricardo; Saiz, Pablo; Santinelli, Roberto; Sidorova, Irina; Sciabà, Andrea; Tsaregorodtsev, Andrei

    2010-04-01

    In the framework of a distributed computing environment, such as WLCG, monitoring has a key role in order to keep under control activities going on in sites located in different countries and involving people based in many different sites. To be able to cope with such a large scale heterogeneous infrastructure, it is necessary to have monitoring tools providing a complete and reliable view of the overall performance of the sites. Moreover, the structure of a monitoring system critically depends on the object to monitor and on the users it is addressed to. In this article we will describe two different monitoring systems both aimed to monitor activities and services provided in the WLCG framework, but designed in order to meet the requirements of different users: Site Status Board has an overall view of the services available in all the sites supporting an experiment, whereas Siteview provides a complete view of all the activities going on at a site, for all the experiments supported by the site.

  7. Analysis of Recorded and Simulated Far-Field Ground Motion From the Source Physics Experiment (Invited)

    NASA Astrophysics Data System (ADS)

    Pitarka, A.; Mellors, R. J.; Vorobiev, O. Y.; Rodgers, A. J.; Walter, W. R.; Antoun, T.; Matzel, E.; Ford, S. R.; Wagoner, J. L.; Petersson, A.; Sjogreen, B.

    2013-12-01

    The Source Physics Experiment (SPE) provides new data for investigating the excitation and propagation of seismic waves generated by buried explosions. The main subjects of our ongoing investigation are the generation of shear-waves, propagation of seismic energy at local and regional distances, and development of numerical techniques for simulating ground motion from underground explosions using physics based source models for different emplacement conditions. We will present an overview of our investigation results based on analysis of far-field waveforms recorded by five linear arrays of stations within 10 km of the shot point, and a small array of stations, with a 2km epicentral distance. We tested the efficiency of our numerical scheme that uses three-dimensional hydrodynamic methods, coupled with an anelastic wave propagation finite-difference method to model the explosion source and ground motion recorded at far-field stations. The best source models that fit the recorded shear and compressional near-field motion, and a calibrated 3D local velocity model, were used to evaluate the sensitivity of wave propagation near the source region to source process, including spall, underground structure, high frequency wave scattering, and surface topography. In particular, we focused on the contribution of these effects to S-wave generation and P/S amplitude ratio in the modeled frequency range of 0.1-8Hz. This work was performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under contract DE-AC52-07NA27344. This work was performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under contract DE-AC52-07NA27344.

  8. Issues in Humanoid Audition and Sound Source Localization by Active Audition

    NASA Astrophysics Data System (ADS)

    Nakadai, Kazuhiro; Okuno, Hiroshi G.; Kitano, Hiroaki

    In this paper, we present an active audition system which is implemented on the humanoid robot "SIG the humanoid". The audition system for highly intelligent humanoids localizes sound sources and recognizes auditory events in the auditory scene. Active audition reported in this paper enables SIG to track sources by integrating audition, vision, and motor movements. Given the multiple sound sources in the auditory scene, SIG actively moves its head to improve localization by aligning microphones orthogonal to the sound source and by capturing the possible sound sources by vision. However, such an active head movement inevitably creates motor noises.The system adaptively cancels motor noises using motor control signals and the cover acoustics. The experimental result demonstrates that active audition by integration of audition, vision, and motor control attains sound source tracking in variety of conditions.onditions.

  9. Laboratory experiments designed to provide limits on the radionuclide source term for the NNWSI Project

    SciTech Connect

    Oversby, V.M.; McCright, R.D.

    1984-11-01

    The Nevada Nuclear Waste Storage Investigations Project is investigating the suitability of the tuffaceous rocks at Yucca Mountain Nevada for potential use as a high-level nuclear waste repository. The horizon under investigation lies above the water table, and therefore offers a setting that differs substantially from other potential repository sites. The unsaturated zone environment allows a simple, but effective, waste package design. The source term for radionuclide release from the waste package will be based on laboratory experiments that determine the corrosion rates and mechanisms for the metal container and the dissolution rate of the waste form under expected long term conditions. This paper describes the present status of laboratory results and outlines the approach to be used in combining the data to develop a realistic source term for release of radionuclides from the waste package. 16 refs., 3 figs., 1 tab.

  10. An ultra-stable voltage source for precision Penning-trap experiments

    NASA Astrophysics Data System (ADS)

    Böhm, Ch.; Sturm, S.; Rischka, A.; Dörr, A.; Eliseev, S.; Goncharov, M.; Höcker, M.; Ketter, J.; Köhler, F.; Marschall, D.; Martin, J.; Obieglo, D.; Repp, J.; Roux, C.; Schüssler, R. X.; Steigleder, M.; Streubel, S.; Wagner, Th.; Westermann, J.; Wieder, V.; Zirpel, R.; Melcher, J.; Blaum, K.

    2016-08-01

    An ultra-stable and low-noise 25-channel voltage source providing 0 to -100 V has been developed. It will supply stable bias potentials for Penning-trap electrodes used in high-precision experiments. The voltage source generates all its supply voltages via a specially designed transformer. Each channel can be operated either in a precision mode or can be dynamically ramped. A reference module provides reference voltages for all the channels, each of which includes a low-noise amplifier to gain a factor of 10 in the output stage. A relative voltage stability of δV / V ≈ 2 ×10-8 has been demonstrated at -89 V within about 10 min.

  11. A prospective pulsed source of ultracold neutrons for experiments in fundamental neutron physics

    NASA Astrophysics Data System (ADS)

    Lauer, Th.; Zechlau, Th.

    2013-08-01

    Since their discovery, ultracold neutrons (UCNs) have been a unique tool for the investigation of fundamental properties of the free neutron and its interactions. The succesfull installation of a new pulsed superthermal source for ultracold neutrons based on solid deuterium at the TRIGA Mainz reactor is described. In a combination of solid hydrogen acting as pre-moderator and a solid deuterium converter of around 160 cm3, this new UCN source should provide at the experimental area ≥ 370000 UCN to the storage volume with the reactor operated in the pulse mode. In a storage experiment, a UCN density of 18 ± 2 UCN/cm3 was measured applying 1.5 pulses with a nominal power of 7 MJ. Assuming a linear behaviour of the UCN output as a function of reactor power this corresponds to a UCN density of 25 ± 3 UCN/cm3 for 2 (10 MJ) pulses.

  12. Applications of an 88Y/Be photoneutron calibration source to dark matter and neutrino experiments.

    PubMed

    Collar, J I

    2013-05-24

    The low-energy monochromatic neutron emission from an (88)Y/Be source can be exploited to mimic the few keV(nr) nuclear recoils expected from low-mass weakly interacting massive particles and coherent scattering of neutrinos off nuclei. Using this source, a experiment, resulting in a marked increase of its tension with other searches, under the standard set of phenomenological assumptions. The method is illustrated for other target materials (superheated and noble liquids). PMID:23745854

  13. Prototype of an angular-selective photoelectron calibration source for the KATRIN experiment

    NASA Astrophysics Data System (ADS)

    Valerius, K.; Hein, H.; Baumeister, H.; Beck, M.; Bokeloh, K.; Bonn, J.; Glück, F.; Ortjohann, H.-W.; Ostrick, B.; Zbořil, M.; Weinheimer, Ch

    2011-01-01

    The method of direct neutrino mass determination based on the kinematics of tritium beta decay, which is adopted by the KATRIN experiment, makes use of a large, high-resolution electrostatic spectrometer with magnetic adiabatic collimation. In order to target a sensitivity on m(ν) of 0.2eV/c2, a detailed understanding of the electromagnetic properties of the electron spectrometer is essential, requiring comprehensive calibration measurements with dedicated electron sources. In this paper we report on a prototype of a photoelectron source providing a narrow energy spread and angular selectivity. Both are key properties for the characterisation of the spectrometer. The angular selectivity is achieved by applying non-parallel strong electric and magnetic fields: Directly after being created, photoelectrons are accelerated rapidly and non-adiabatically by a strong electric field before adiabatic magnetic guiding takes over.

  14. Information-Driven Active Audio-Visual Source Localization

    PubMed Central

    Schult, Niclas; Reineking, Thomas; Kluss, Thorsten; Zetzsche, Christoph

    2015-01-01

    We present a system for sensorimotor audio-visual source localization on a mobile robot. We utilize a particle filter for the combination of audio-visual information and for the temporal integration of consecutive measurements. Although the system only measures the current direction of the source, the position of the source can be estimated because the robot is able to move and can therefore obtain measurements from different directions. These actions by the robot successively reduce uncertainty about the source’s position. An information gain mechanism is used for selecting the most informative actions in order to minimize the number of actions required to achieve accurate and precise position estimates in azimuth and distance. We show that this mechanism is an efficient solution to the action selection problem for source localization, and that it is able to produce precise position estimates despite simplified unisensory preprocessing. Because of the robot’s mobility, this approach is suitable for use in complex and cluttered environments. We present qualitative and quantitative results of the system’s performance and discuss possible areas of application. PMID:26327619

  15. Active experiments in the ionosphere and geomagnetic field variations

    NASA Astrophysics Data System (ADS)

    Sivokon, V. P.; Cherneva, N. V.; Khomutov, S. Y.; Serovetnikov, A. S.

    2014-11-01

    Variations of ionospheric-magnetospheric relation energy, as one of the possible outer climatology factors, may be traced on the basis of analysis of natural geophysical phenomena such as ionosphere artificial radio radiation and magnetic storms. Experiments on active impact on the ionosphere have been carried out for quite a long time in Russia as well. The most modern heating stand is located in Alaska; it has been used within the HAARP Program. The possibility of this stand to affect geophysical fields, in particular, the geomagnetic field is of interest.

  16. Electron beam injection during active experiments. II - Collisional effects

    NASA Technical Reports Server (NTRS)

    Winglee, R. M.

    1990-01-01

    During active beam experiments, the presence of high neutral densities at low altitudes and/or during thruster firings has been observed to modify the spacecraft charging and the properties of the beam. Two-dimensional (three-velocity) electromagnetic particle simulations with ionizing collisions incorporated are used to investigate the modification of the beam-plasma interaction as the neutral density is increased. It is shown that when the spacecraft is uniformly immersed in a neutral cloud, most of the ionization is produced by direct ionization by the beam and its secondaries, rather than via vehicle-induced or wave-induced ionization for the neutral densities considered.

  17. Matter under extreme conditions experiments at the Linac Coherent Light Source

    NASA Astrophysics Data System (ADS)

    Glenzer, S. H.; Fletcher, L. B.; Galtier, E.; Nagler, B.; Alonso-Mori, R.; Barbrel, B.; Brown, S. B.; Chapman, D. A.; Chen, Z.; Curry, C. B.; Fiuza, F.; Gamboa, E.; Gauthier, M.; Gericke, D. O.; Gleason, A.; Goede, S.; Granados, E.; Heimann, P.; Kim, J.; Kraus, D.; MacDonald, M. J.; Mackinnon, A. J.; Mishra, R.; Ravasio, A.; Roedel, C.; Sperling, P.; Schumaker, W.; Tsui, Y. Y.; Vorberger, J.; Zastrau, U.; Fry, A.; White, W. E.; Hasting, J. B.; Lee, H. J.

    2016-05-01

    The matter in extreme conditions end station at the Linac Coherent Light Source (LCLS) is a new tool enabling accurate pump–probe measurements for studying the physical properties of matter in the high-energy density (HED) physics regime. This instrument combines the world’s brightest x-ray source, the LCLS x-ray beam, with high-power lasers consisting of two nanosecond Nd:glass laser beams and one short-pulse Ti:sapphire laser. These lasers produce short-lived states of matter with high pressures, high temperatures or high densities with properties that are important for applications in nuclear fusion research, laboratory astrophysics and the development of intense radiation sources. In the first experiments, we have performed highly accurate x-ray diffraction and x-ray Thomson scattering measurements on shock-compressed matter resolving the transition from compressed solid matter to a co-existence regime and into the warm dense matter state. These complex charged-particle systems are dominated by strong correlations and quantum effects. They exist in planetary interiors and laboratory experiments, e.g., during high-power laser interactions with solids or the compression phase of inertial confinement fusion implosions. Applying record peak brightness x-rays resolves the ionic interactions at atomic (Ångstrom) scale lengths and measure the static structure factor, which is a key quantity for determining equation of state data and important transport coefficients. Simultaneously, spectrally resolved measurements of plasmon features provide dynamic structure factor information that yield temperature and density with unprecedented precision at micron-scale resolution in dynamic compression experiments. These studies have demonstrated our ability to measure fundamental thermodynamic properties that determine the state of matter in the HED physics regime.

  18. NEAR FIELD MODELING OF SPE1 EXPERIMENT AND PREDICTION OF THE SECOND SOURCE PHYSICS EXPERIMENTS (SPE2)

    SciTech Connect

    Antoun, T; Xu, H; Vorobiev, O; Lomov, I

    2011-10-20

    Motion along joints and fractures in the rock has been proposed as one of the sources of near-source shear wave generation, and demonstrating the validity of this hypothesis is a focal scientific objective of the source physics experimental campaign in the Climax Stock granitic outcrop. A modeling effort has been undertaken by LLNL to complement the experimental campaign, and over the long term provide a validated computation capability for the nuclear explosion monitoring community. The approach involves performing the near-field nonlinear modeling with hydrodynamic codes (e.g., GEODYN, GEODYN-L), and the far-field seismic propagation with an elastic wave propagation code (e.g., WPP). the codes will be coupled together to provide a comprehensive source-to-sensor modeling capability. The technical approach involves pre-test predictions of each of the SPE experiments using their state of the art modeling capabilities, followed by code improvements to alleviate deficiencies identified in the pre-test predictions. This spiral development cycle wherein simulations are used to guide experimental design and the data from the experiment used to improve the models is the most effective approach to enable a transition from the descriptive phenomenological models in current use to the predictive, hybrid physics models needed for a science-based modeling capability for nuclear explosion monitoring. The objective of this report is to describe initial results of non-linear motion predictions of the first two SPE shots in the Climax Stock: a 220-lb shot at a depth of 180 ft (SPE No.1), and a 2570-lb shot at a depth of 150 ft (SPE No.2). The simulations were performed using the LLNL ensemble granite model, a model developed to match velocity and displacement attenuation from HARDHAT, PILE DRIVER, and SHOAL, as well as Russian and French nuclear test data in granitic rocks. This model represents the state of the art modeling capabilities as they existed when the SPE campaign was

  19. NetMenu: experience in the implementation of an institutional menu of information sources.

    PubMed Central

    Shifman, M. A.; Clyman, J. I.; Paton, J. A.; Powsner, S. M.; Roderer, N. K.; Miller, P. L.

    1993-01-01

    NetMenu is a program, developed at Yale, which enables straightforward access to online information systems. NetMenu has been deployed in several diverse settings within our medical center. In the hospital, NetMenu is functioning as a front-end for our clinical workstation providing access to the hospital information system, the clinical laboratory computer, a drug database and several bibliographic databases. The medical libraries are utilizing NetMenu for both medical education workstations and for scholarly information workstations. This paper describes our initial experience in the implementation, support, and maintenance of NetMenu as an institutional menu of information sources. PMID:8130535

  20. Experience with the Source Evaluation Board method of procuring technical components for the Fermilab Main Injector

    SciTech Connect

    Harding, D.J.; Collins, J.P.; Kobliska, G.R.; Chester, N.S.; Pewitt, E.G.; Fowler, W.B.

    1993-05-01

    Fermilab has adopted the Source Evaluation Board (SEB) method for procuring certain major technical components of the Fermilab Main Injector. The SEB procedure is designed to ensure the efficient and effective expenditure of Government funds at the same time that it optimizes the opportunity for attainment of project objectives. A qualitative trade-off is allowed between price and technical factors. The process involves a large amount of work and is only justified for a very limited number of procurements. Fermilab has gained experience with the SEB process in awarding subcontracts for major subassemblies of the Fermilab Main Injector dipoles.

  1. An Analysis of Gamma-ray Burst Time Profiles from the Burst and Transient Source Experiment

    NASA Technical Reports Server (NTRS)

    Lestrade, John Patrick

    1996-01-01

    This proposal requested funding to measure the durations of gamma-ray bursts (GRB) in the 4B catalog as well as to study the structure of GRB time profiles returned by the Burst And Transient Source Experiment (BATSE) on board the Compton Gamma-Ray Observatory. The duration (T90) was to be measured using the same techniques and algorithms developed by the principal investigator for the 3B data. The profile structure studies fall into the two categories of variability and fractal analyses.

  2. Gamma-ray burst locations from the Burst and Transient Source Experiment

    NASA Technical Reports Server (NTRS)

    Brock, M. N.; Meegan, C. A.; Roberts, F. E.; Fishman, G. J.; Wilson, R. B.; Paciesas, W. S.; Pendleton, G. N.

    1992-01-01

    The Burst and Transient Source Experiment (BATSE) consists of eight anisotropic gamma-ray spectrometers at the corners of the Compton Gamma Ray Observatory. BATSE monitors the full sky from a fixed orientation and determines the direction of gamma-ray bursts with an accuracy appropriate for studying the bursts' celestial distribution. We describe the calculation of gamma-ray burst directions from measurements made by BATSE. We present a sample of calculated directions from BATSE's measurement of solar flaxes and compare the calculated directions with the solar direction. We describe the systematic errors apparent in these data and discuss ongoing efforts to correct them.

  3. Development and operating experience of a short-period superconducting undulator at the Advanced Photon Source

    NASA Astrophysics Data System (ADS)

    Ivanyushenkov, Y.; Harkay, K.; Abliz, M.; Boon, L.; Borland, M.; Capatina, D.; Collins, J.; Decker, G.; Dejus, R.; Dooling, J.; Doose, C.; Emery, L.; Fuerst, J.; Gagliano, J.; Hasse, Q.; Jaski, M.; Kasa, M.; Kim, S. H.; Kustom, R.; Lang, J. C.; Liu, J.; Moog, E.; Robinson, D.; Sajaev, V.; Schroeder, K.; Sereno, N.; Shiroyanagi, Y.; Skiadopoulos, D.; Smith, M.; Sun, X.; Trakhtenberg, E.; Vasserman, I.; Vella, A.; Xiao, A.; Xu, J.; Zholents, A.; Gluskin, E.; Lev, V.; Mezentsev, N.; Syrovatin, V.; Tsukanov, V.; Makarov, A.; Pfotenhauer, J.; Potratz, D.

    2015-04-01

    A decade-long effort at the Advanced Photon Source (APS) of Argonne National Laboratory (ANL) on development of superconducting undulators culminated in December 2012 with the installation of the first superconducting undulator "SCU0" into Sector 6 of the APS storage ring. The device was commissioned in January 2013 and has been in user operation since. This paper presents the magnetic and cryogenic design of the SCU0 together with the results of stand-alone cold tests. The initial commissioning and characterization of SCU0 as well as its operating experience in the APS storage ring are described.

  4. Gaseous source of 83mKr conversion electrons for the neutrino experiment KATRIN

    NASA Astrophysics Data System (ADS)

    Vénos, D.; Slezák, M.; Dragoun, O.; Inoyatov, A.; Lebeda, O.; Pulec, Z.; Sentkerestiová, J.; Špalek, A.

    2014-12-01

    The metastable 83mKr with short half-life of 1.83 h is intended as a space distributed source of monoenergetic electrons for energy calibration and systematic studies in the Karlsruhe tritium neutrino experiment (KATRIN). The efficient production of the parent radionuclide 83Rb at cyclotron U-120M was implemented. The release of the 83mKr from zeolite (molecular sieve), in which the parent radionuclide 83Rb (T1/2 = 86.2 d) was trapped, was studied under various conditions using the gamma spectroscopy. Residual gas analysis of ultra high vacuum over the zeolite was performed as well.

  5. Optical Microscopy Characterization for Borehole U-15n#12 in Support of NCNS Source Physics Experiment

    SciTech Connect

    Wilson, Jennifer E.; Sussman, Aviva Joy

    2015-05-22

    Optical microscopy characterization of thin sections from corehole U-15n#12 is part of a larger material characterization effort for the Source Physics Experiment (SPE). The SPE program was conducted in Nevada with a series of explosive tests designed to study the generation and propagation of seismic waves inside Stock quartz monzonite. Optical microscopy analysis includes the following: 1) imaging of full thin sections (scans and mosaic maps); 2) high magnification imaging of petrographic texture (grain size, foliations, fractures, etc.); and 3) measurement of microfracture density.

  6. Feasibility study of an active target for the MEG experiment

    NASA Astrophysics Data System (ADS)

    Papa, A.; Cavoto, G.; Ripiccini, E.

    2014-03-01

    We consider the possibility to have an active target for the upgrade of the MEG experiment (MEG II). The active target should work as (1) a beam monitoring, to continuously measure the muon stopping rate and therefore provide a direct evaluation of the detector acceptance (or an absolute normalization of the stopped muon); and as (2) an auxiliary device for the spectrometer, to improve the determination of the muon decay vertex and consequently to achieve a better positron momentum and angular resolutions, detecting the positron from the muon decay. In this work we studied the feasibility of detecting minimum ionizing particle with a single layer of 250 μm fiber and the capability to discriminate between the signal induced by either a muon or a positron.

  7. The space experiment CERASP: Definition of a space-suited radiation source and growth conditions for human cells

    NASA Astrophysics Data System (ADS)

    Hellweg, Christine E.; Baumstark-Khan, Christa; Spitta, Luis; Thelen, Melanie; Arenz, Andrea; Franz, Markus; Schulze-Varnholt, Dirk; Berger, Thomas; Reitz, Günther

    The combined action of ionizing radiation and microgravity will continue to influence future space missions, with special risks for astronauts on the Moon surface or for long duration missions to Mars. It has been estimated that on a 3-year mission to Mars about 3% of the bodies' cell nuclei would have been hit by one iron ion with the consequence that nuclear DNA will be heavily damaged. There is increasing evidence that basic cellular functions are sensitive not only to radiation but also to microgravity. DNA repair studies in space on bacteria, yeast cells and human fibroblasts, which were irradiated before, flight, gave contradictory results: from inhibition of repair by microgravity to enhancement, whereas others did not detect any influence of microgravity on repair. The space experiment CERASP (CEllular Responses to RAdiation in SPace) to be performed at the International Space Station (ISS) is aimed to supply basic information on the cellular response in microgravity to radiation applied during flight. It makes use of a recombinant human cell line as reporter for cellular signal transduction modulation by genotoxic environmental conditions. The main biological endpoints under investigation will be gene activation based on enhanced green fluorescent protein (EGFP, originally isolated from the bioluminescent jellyfish Aequorea victoria) expression controlled by a DNA damage-dependent promoter element which reflects the activity of the nuclear factor kappa B (NF- κB) pathway. The NF- κB family of proteins plays a major role in the inflammatory and immune response, cell proliferation and differentiation, anti-apoptosis and tumorgenesis. For radiation exposure during space flight a radiation source has been constructed as damage accumulation by cosmic radiation will certainly be insufficient for analysis. The space experiment specific hardware consists of a specially designed radiation source made up of the β-emitter promethium-147, combined with a

  8. Mixing of a point-source indoor pollutant: Numerical predictions and comparison with experiments

    SciTech Connect

    Lobscheid, C.; Gadgil, A.J.

    2002-01-01

    In most practical estimates of indoor pollutant exposures, it is common to assume that the pollutant is uniformly and instantaneously mixed in the indoor space. It is also commonly known that this assumption is simplistic, particularly for point sources, and for short-term or localized indoor exposures. We report computational fluid dynamics (CFD) predictions of mixing time of a point-pulse release of a pollutant in an unventilated mechanically mixed isothermal room. We aimed to determine the adequacy of the standard RANS two-equation ({kappa}-{var_epsilon}) turbulence model to predict the mixing times under these conditions. The predictions were made for the twelve mixing time experiments performed by Drescher et al. (1995). We paid attention to adequate grid resolution, suppression of numerical diffusion, and careful simulation of the mechanical blowers used in the experiments. We found that the predictions are in good agreement with experimental measurements.

  9. Solar neutrino experiments and a test for neutrino oscillations with radioactive sources

    SciTech Connect

    Cleveland, B.T.; Davis, R. Jr.; Rowley, J.K.

    1980-01-01

    The results of the Brookhaven solar neutrino experiment are given and compared to the most recent standard solar model calculations. The observations are about a factor of 4 below theoretical expectations. In view of the uncertainties involved in the theoretical models of the sun, the discrepancy is not considered to be evidence for neutrino oscillations. The status of the development of a gallium solar neutrino detector is described. Radiochemical neutrino detectors can be used to search for ..nu../sub e/ oscillations by using megacurie sources of monoenergetic neutrinos like /sup 65/Zn. A quantitative evaluation of possible experiments using the Brookhaven chlorine solar neutrino detector and a gallium detector is given. 6 figures, 3 tables.

  10. Using the Fermilab proton source for a muon to electron conversion experiment

    SciTech Connect

    Ankenbrandt, C.; Bogert, D.; DeJongh, F.; Geer, S.; McGinnis, D.; Neuffer, D.; Popovic, M.; Prebys, E.; /Fermilab

    2006-11-01

    The Fermilab proton source is capable of providing 8 GeV protons for both the future long-baseline neutrino program (NuMI), and for a new program of low energy muon experiments. In particular, if the 8 GeV protons are rebunched and then slowly extracted into an external beamline, the resulting proton beam would be suitable for a muon-to-electron conversion experiment designed to improve on the existing sensitivity by three orders of magnitude. We describe a scheme for the required beam manipulations. The scheme uses the Accumulator for momentum stacking, and the Debuncher for bunching and slow extraction. This would permit simultaneous operation of the muon program with the future NuMI program, delivering 10{sup 20} protons per year at 8 GeV for the muon program at the cost of a modest ({approx}10%) reduction in the protons available to the neutrino program.

  11. Fuel plate stability experiments and analysis for the Advanced Neutron Source

    SciTech Connect

    Swinson, W.F.; Battiste, R.L.; Luttrell, C.R.; Yahr, G.T.

    1993-05-01

    The planned reactor for the Advanced Neutron Source (ANS) will use closely spaced arrays of involute-shaped fuel plates that will be cooled by water flowing through the channels between the plates. There is concern that at certain coolant flow velocities, adjacent plates may deflect and touch, with resulting failure of the plates. Experiments have been conducted at the Oak Ridge National Laboratory to examine this potential phenomenon. Results of the experiments and comparison with analytical predictions are reported. The tests were conducted using full-scale epoxy plate models of the aluminum/uranium silicide ANS involute-shaped fuel plates. Use of epoxy plates and model theory allowed lower flow velocities and pressures to explore the potential failure mechanism. Plate deflections and channel pressures as functions of the flow velocity are examined. Comparisons with mathematical models are noted.

  12. Advisory Committee on human radiation experiments. Supplemental Volume 2a, Sources and documentation appendices. Final report

    SciTech Connect

    1995-01-01

    This large document provides a catalog of the location of large numbers of reports pertaining to the charge of the Presidential Advisory Committee on Human Radiation Research and is arranged as a series of appendices. Titles of the appendices are Appendix A- Records at the Washington National Records Center Reviewed in Whole or Part by DoD Personnel or Advisory Committee Staff; Appendix B- Brief Descriptions of Records Accessions in the Advisory Committee on Human Radiation Experiments (ACHRE) Research Document Collection; Appendix C- Bibliography of Secondary Sources Used by ACHRE; Appendix D- Brief Descriptions of Human Radiation Experiments Identified by ACHRE, and Indexes; Appendix E- Documents Cited in the ACHRE Final Report and other Separately Described Materials from the ACHRE Document Collection; Appendix F- Schedule of Advisory Committee Meetings and Meeting Documentation; and Appendix G- Technology Note.

  13. A 12 years brazilian space education activity experience

    NASA Astrophysics Data System (ADS)

    Stancato, Fernando; Gustavo Catalani Racca, João; Ballarotti, MaurícioG.

    2001-03-01

    A multidisciplinary group of students from the university and latter also from the high school was formed in 1988 with the objective to make them put in practice their knowledge in physics, chemistry and mathematics and engineering fields in experimental rocketry. The group was called "Grupo de Foguetes Experimentais", GFE. Since that time more than 150 students passed throw the group and now many of them are in the space arena. The benefits for students in a space hands-on project are many: More interest in their school subjects is gotten as they see an application for them; Interrelation attitudes are learned as space projects is a team activity; Responsibility is gained as each is responsible for a part of a critical mission project; Multidisciplinary and international experience is gotten as these are space project characteristics; Learn how to work in a high stress environment as use to be a project launch. This paper will cover the educational experiences gotten during these years and how some structured groups work. It is explained the objectives and how the group was formed. The group structure and the different phases that at each year the new team passes are described. It is shown the different activities that the group uses to do from scientific seminars, scientific club and international meetings to technical tours and assistance to rocket activities in regional schools. It is also explained the group outreach activities as some launches were covered by the media in more then 6 articles in newspaper and 7 television news. In 1999 as formed an official group called NATA, Núcleo de Atividades Aerospaciais within the Universidade Estadual de Londrina, UEL, by some GFE members and teachers from university. It is explained the first group project results.

  14. Simulations as Active Assessment?: Typologizing by Purpose and Source

    ERIC Educational Resources Information Center

    Kollars, Nina A.; Rosen, Amanda M.

    2013-01-01

    Assessment through simulation is something that political science pedagogy has yet to explore in a robust manner. This article advances analysis of social science simulation and assessment by laying out a typology of active-learning activities that isolates and examines their potential for assessment. In short, we argue that there are essentially…

  15. Groundwater seepage landscapes with local or distal sources in experiments and on Mars

    NASA Astrophysics Data System (ADS)

    Kleinhans, Maarten; Marra, Wouter A.; Hauber, Ernst; McLelland, Stuart; Murphy, Brendan; Parsons, Daniel

    2015-04-01

    Groundwater has probably played an important role in shaping the surface of Mars. However, the hydrological origin of many typical Martian groundwater features is hampered by the lack of coupling between subsurface processes and surface morphology. Here we focus on the formation of theater-headed valleys. The basic morphology of such valleys can form by erosion through groundwater seepage (sapping), but similar valley morphology can also be the result of overland flow with waterfall-enhanced erosion. This morphological ambiguity complicates the interpretation of such valleys on Mars, but their climatic implications are quite different. Instead of the ambiguous single-valley morphology, metrics of the entire landscape may provide a diagnostic insight into the formative hydrological conditions. We aim to increase our understanding of the formation of entire landscapes by sapping processes and their hydrological implications by providing a framework for morphological metrics of different types of sapping systems. We study sapping from different groundwater sources using large-scale sandbox experiments in the Total Environmental Simulator at the University of Hull and combine our results with previous experiments. Importantly, flow patterns and the resulting landscapes are significantly different for the different sources of groundwater. The main differences are between sapping that results from either local or distal sources. Key results of our study are that groundwater piracy acts on distally-fed valleys, which results in a sparsely dissected landscape of many small and a few large valleys, while locally-fed valleys result in a densely dissected landscape. In addition, distally-fed valleys grow towards the direction of the groundwater source while locally-fed channels grow in a broad range of directions and have strong tendency to bifurcate, particularly on flat horizontal surfaces. To exemplify these differences, we apply the results to aid the interpretation of

  16. Factors affecting the pore space transformation during hydrocarbon generation in source rock (shales): laboratory experiment

    NASA Astrophysics Data System (ADS)

    Giliazetdinova, D. R.; Korost, D. V.

    2014-12-01

    Oil and gas generation is a set of processes which taking place in the interior, the processes can't be observable in nature. In the process of dumping the source rock, organic matter is transformed into a complex of high-molecular compounds - precursors of oil and gas (kerogen). Entering of a source column for specific thermobaric conditions, triggers the formation of low molecular weight hydrocarbon compounds. Generation of sufficient quantities of hydrocarbons leads to the primary fluid migration within the source rock. For the experiment were selected mainly siliceous-carbonate composition rocks from Domanic horizon South-Tatar arch. The main aim of experiment was heating the rocks in the pyrolyzer to temperatures which correspond katagenes stages. For monitoring changes in the morphology of the pore space X-ray microtomography method was used. As a result, when was made a study of the composition of mineral and organic content of the rocks, as well as textural and structural features, have been identified that the majority of the rock samples within the selected collection are identical. However, characteristics such as organic content and texture of rocks are different. Thus, the experiment was divided into two parts: 1) the study of the influence of organic matter content on the morphology of the rock in the process of thermal effects; 2) study the effect of texture on the primary migration processes for the same values of organic matter. Also, an additional experiment was conducted to study the dynamics of changes in the structure of the pore space. At each stage of the experiment morphology of altered rocks characterized by the formation of new pores and channels connecting the primary voids. However, it was noted that the samples with a relatively low content of the organic matter had less changes in pore space morphology, in contrast to rocks with a high organic content. At the second stage of the research also revealed that the conversion of the pore

  17. LMFBR source term experiments in the Fuel Aerosol Simulant Test (FAST) facility

    SciTech Connect

    Petrykowski, J.C.; Longest, A.W.

    1985-01-01

    The transport of uranium dioxide (UO/sub 2/) aerosol through liquid sodium was studied in a series of ten experiments in the Fuel Aerosol Simulant Test (FAST) facility at Oak Ridge National Laboratory (ORNL). The experiments were designed to provide a mechanistic basis for evaluating the radiological source term associated with a postulated, energetic core disruptive accident (CDA) in a liquid metal fast breeder reactor (LMFBR). Aerosol was generated by capacitor discharge vaporization of UO/sub 2/ pellets which were submerged in a sodium pool under an argon cover gas. Measurements of the pool and cover gas pressures were used to study the transport of aerosol contained by vapor bubbles within the pool. Samples of cover gas were filtered to determine the quantity of aerosol released from the pool. The depth at which the aerosol was generated was found to be the most critical parameter affecting release. The largest release was observed in the baseline experiment where the sample was vaporized above the sodium pool. In the nine ''undersodium'' experiments aerosol was generated beneath the surface of the pool at depths varying from 30 to 1060 mm. The mass of aerosol released from the pool was found to be a very small fraction of the original specimen. It appears that the bulk of aerosol was contained by bubbles which collapsed within the pool. 18 refs., 11 figs., 4 tabs.

  18. Report on active and planned spacecraft and experiments

    NASA Technical Reports Server (NTRS)

    Schofield, N. J., Jr.; Littlefield, R. G.; Elsen, M. F.

    1985-01-01

    This report provides the professional community with information on current and planned spacecraft activity (including both free-flying spacecraft and Shuttle-attached payloads) for a broad range of scientific disciplines. By providing a brief description of each spacecraft and experiment as well as its current status, it is hoped that this document will be useful to many people interested in the scientific, applied, and operational uses of the data collected. Furthermore, for those investigators who are planning or coordinating future observational programs employing a number of different techniques such as rockets, balloons, aircraft, ships, and buoys, this document can provide some insight into the contributions that may be provided by orbiting instruments. The document includes information concerning active and planned spacecraft and experiments. The information covers a wide range of scientific disciplines: astronomy, earth sciences, meteorology, planetary sciences, aeronomy, particles and fields, solar physics, life sciences, and material sciences. These spacecraft projects represent the efforts and funding of individual countries, as well as cooperative arrangements among different countries.

  19. Computer modeling of active experiments in space plasmas

    NASA Astrophysics Data System (ADS)

    Bollens, Ross John

    1993-01-01

    Our understanding of space plasmas is expanding rapidly. This is, in large part, due to the ambitious efforts of scientists from around the world who are performing large scale active experiments in the space plasma surrounding the earth. One such effort was designated the Active Magnetospheric Particle Tracer Explorers (AMPTE) and consisted of a series of plasma releases that were completed during 1984 and 1985. What makes the AMPTE experiments particularly interesting was the occurrence of a dramatic anomaly that was completely unpredicted. During the AMPTE experiment, three satellites traced the solar wind flow into the earth's magnetosphere. One satellite, built by West Germany, released a series of barium and lithium canisters that were detonated and subsequently photoionized via solar radiation, thereby creating an artificial comet. Another satellite, built by Great Britain and in the vicinity during detonation, carried, as did the first satellite, a comprehensive set of magnetic field, particle, and wave instruments. Upon detonation, what was observed by the satellites, as well as by aircraft and ground-based observers, was quite unexpected. The initial deflection of the ion clouds was not in the ambient solar wind's flow direction (V) but rather in the direction transverse to the solar wind and the background magnetic field (V x B). This result was not predicted by any existing theories or simulation models; it is the main subject discussed in this dissertation. A large three dimensional computer simulation was produced to demonstrate that this transverse motion can be explained in terms of a rocket effect. Due to the extreme computer resources utilized in producing this work, the computer methods used to complete the calculation and the visualization techniques used to view the results are also discussed.

  20. Experiment study of an electron cyclotron resonant ion source based on a tapered resonance cavity

    SciTech Connect

    Yang, Juan; Shi, Feng; Jin, Yizhou; Wang, Yunmin; Komurasaki, Kimiya

    2013-12-15

    Electron cyclotron resonant plasma is one type of magnetised plasma generated by continuous microwave energy. It has the property of high degree of ionization and large volume at low gas pressure, which makes it useful for space propulsion and material processing. This article presents the experiment study of the plasma properties and ion beam extraction from an electron cyclotron resonant ion source based on a tapered resonance cavity. Optical emission spectroscopy based on a simple collisional radiation model was used for plasma diagnosis. Experiment results show that, at microwave power setting ranging from 7.06 to 17.40 W and mass flow rate ranging from 1 to 10 sccm, argon gas can be ionized. Ion beam of 109.1 mA from the ion source can be extracted at microwave power of 30 W, mass flow rate of 10 sccm, and accel voltage of 800 V. The diagnosed plasma temperature and density are 2.4–5.2 eV and 2 × 10{sup 16}–4.8 × 10{sup 17} m{sup −3}, respectively.

  1. Misty Picture: A Unique Experiment for the Interpretation of the Infrasound Propagation from Large Explosive Sources

    NASA Astrophysics Data System (ADS)

    Gainville, O.; Blanc, E.; Blanc-Benon, P.; Roche, R.; Millet, C.; Le Piver, F.; Piserchia, P.

    2008-12-01

    In the framework of the Comprehensive Nuclear-Test-Ban Treaty, the International Monitoring System develops a 60 micro-barometric stations network. These stations, which records infrasound, detect various powerful natural and artificial sources like long range explosions, oceanic swell, and volcano eruptions. The Misty Picture experiment is a high explosive event (4685 Tons of ANFO) realized in 1987 in New Mexico (US). Infrasound waves were recorded by an amount of 22 sensors installed by the Sandia National Laboratories (J.W. Reed et al., 1977, SAND--87-2978C), the Los Alamos National Laboratories (R.W. Whitaker et al. 1990, 4th LRSP) and the CEA (E. Blanc, 1998, CEA). Multi-reflected tropospheric, stratospheric and thermospheric phases are detected until a distance of 1000 km in a quiet background noise condition. Signals recorded near the source (1 km away) and observed in the geometrical shadow zone (between 150 km and 250 km) are of particular interest. This reference experiment is used to improve our understanding of the atmospheric propagation of infrasound as well as to evaluate our models. Using various methods such as ray tracing and parabolic equation, we investigate effects of the wind, atmospheric absorption, nonlinearity, refraction and scattering by small atmospheric scales on observed phase kinds, their travel time and their waveform.

  2. Experiment study of an electron cyclotron resonant ion source based on a tapered resonance cavity

    NASA Astrophysics Data System (ADS)

    Yang, Juan; Shi, Feng; Jin, Yizhou; Wang, Yunmin; Komurasaki, Kimiya

    2013-12-01

    Electron cyclotron resonant plasma is one type of magnetised plasma generated by continuous microwave energy. It has the property of high degree of ionization and large volume at low gas pressure, which makes it useful for space propulsion and material processing. This article presents the experiment study of the plasma properties and ion beam extraction from an electron cyclotron resonant ion source based on a tapered resonance cavity. Optical emission spectroscopy based on a simple collisional radiation model was used for plasma diagnosis. Experiment results show that, at microwave power setting ranging from 7.06 to 17.40 W and mass flow rate ranging from 1 to 10 sccm, argon gas can be ionized. Ion beam of 109.1 mA from the ion source can be extracted at microwave power of 30 W, mass flow rate of 10 sccm, and accel voltage of 800 V. The diagnosed plasma temperature and density are 2.4-5.2 eV and 2 × 1016-4.8 × 1017 m-3, respectively.

  3. The solar activity measurements experiments (SAMEX) for improved scientific understanding of solar activity

    NASA Technical Reports Server (NTRS)

    1989-01-01

    The Solar Activity Measurements Experiments (SAMEX) mission is described. It is designed to provide a look at the interactions of magnetic fields and plasmas that create flares and other explosive events on the sun in an effort to understand solar activity and the nature of the solar magnetic field. The need for this mission, the instruments to be used, and the expected benefits of SAMEX are discussed.

  4. An active seismic experiment proposal onboard the NASA 2009 MSL

    NASA Astrophysics Data System (ADS)

    Lognonné, P.; Experiment Team

    NASA will launch in 2009 a 900 kg class rover to Mars. This rover will land with a new descent system, called the ``sky-crane''. After releasing the rover on the ground, the sky-crane will have a final flight until a hard landing about 2 km away from the rover. The science objectives of the 2009 MSL mission, among others, are to characterize the geology of the landing region at all appropriate spatial scales, to interpret the processes that have formed and modified rocks and regolith and to determine present state, distribution, and cycling of water. We propose to perform with the sky-crane an active seismic experiment for subsurface characterization. This experiment will be conducted after the rover deployment. The proposed idea is to deploy a seismic receiver line by ejecting about 10 seismic nodes from the sky-crane and then to record then the reflected signals from the impact of the sky-crane. Preliminary modeling and tests indicate that a penetration depth of several hundred meters will be reached. The experiment will be used to determine a 2D geological profile of the landing site subsurface, to determine the depth and shape of the dry regolith/icy regolith discontinuity and to identify possible layering structures in the subsurface. In addition, information on the structure of the regolith (mean size of building blocs) and on the presence of liquid water will be obtained by an analysis of the seismic coda and attenuation. The seismic high frequency noise will also be monitored, especially during windy periods, and will be used to get additional information on the subsurface. The proposed experiment is based on a consortium between academics laboratories and seismic industry and will be a first example of a resource oriented experiment on another planet than Earth. The complete mass of the experiment will be 2.5 kg. Seismic nodes will have their own acquisition/power and telemetry system and will be based on high sensitive geophones developed for seismic

  5. Discrete and continuum simulations of near-field ground motion from Source Physics Experiments (SPE) (Invited)

    NASA Astrophysics Data System (ADS)

    Ezzedine, S. M.; Vorobiev, O.; Herbold, E. B.; Glenn, L. A.; Antoun, T.

    2013-12-01

    This work is focused on analysis of near-field measurements (up to 100 m from the source) recorded during Source Physics Experiments in a granitic formation. One of the main goals of these experiments is to investigate the possible mechanisms of shear wave generation in the nonlinear source region. SPE experiments revealed significant tangential motion (up to 30 % of the magnitude in the radial direction) at many locations. Furthermore, azimuthal variations in radial velocities were also observed which cannot be generated by a spherical source in isotropic materials. Understanding the nature of this non-radial motion is important for discriminating between the natural seismicity and underground explosions signatures. Possible mechanisms leading to such motion include, but not limited to, heterogeneities in the rock such as joints, faults and geologic layers as well as surface topography and vertical motion at the surface caused by material spall and gravity. We have performed a three dimensional computational studies considering all these effects. Both discrete and continuum methods have been employed to model heterogeneities. In the discrete method, the joints and faults were represented by cohesive contact elements. This enables us to examine various friction laws at the joints which include softening, dilatancy, water saturation and rate-dependent friction. Yet this approach requires the mesh to be aligned with joints, which may present technical difficulties in three dimensions when multiple non-persistent joints are present. In addition, the discrete method is more computationally expensive. The continuum approach assumes that the joints are stiff and the dilatancy and shear softening can be neglected. In this approach, the joints are modeled as weakness planes within the material, which are imbedded into and pass through many finite elements. The advantage of this approach is that it requires neither sophisticated meshing algorithms nor contact detection

  6. The Need for Confirmatory Experiments on the Radioactive Source Term from Potential Sabotage of Spent Nuclear Fuel Casks

    SciTech Connect

    PHILBIN, JEFFREY S.; HOOVER, MARK D.; NEWTON, GEORGE J.

    2002-04-01

    A technical review is presented of experiment activities and state of knowledge on air-borne, radiation source terms resulting from explosive sabotage attacks on spent reactor fuel subassemblies in shielded casks. Current assumptions about the behavior of irradiated fuel are largely based on a limited number of experimental results involving unirradiated, depleted uranium dioxide ''surrogate'' fuel. The behavior of irradiated nuclear fuel subjected to explosive conditions could be different from the behavior of the surrogate fuel, depending on the assumptions made by the evaluator. Available data indicate that these potential differences could result in errors, and possible orders-of-magnitude overestimates of aerosol dispersion and potential health effects from sabotage attacks. Furthermore, it is suggested that the current assumptions used in arriving at existing regulations for the transportation and storage of spent fuel in the U.S. are overly conservative. This, in turn, has led to potentially higher-than-needed operating expenses for those activities. A confirmatory experimental program is needed to develop a realistic correlation between source terms of irradiated fuel and unirradiated fuel. The motivations for performing the confirmatory experimental program are also presented.

  7. X-RAY ACTIVE MATRIX PIXEL SENSORS BASEDON J-FET TECHNOLOGY DEVELOPED FOR THE LINAC COHERENT LIGHT SOURCE.

    SciTech Connect

    CARINI,G.A.; CHEN, W.; LI, Z.; REHAK, P.; SIDDONS, D.P.

    2007-10-29

    An X-ray Active Matrix Pixel Sensor (XAMPS) is being developed for recording data for the X-ray Pump Probe experiment at the Linac Coherent Light Source (LCLS). Special attention has to be paid to some technological challenges that this design presents. New processes were developed and refined to address problems encountered during previous productions of XAMPS. The development of these critical steps and corresponding tests results are reported here.

  8. Oscillatory Hydraulic Tomography for NAPL Source Zone Characterization: Sandbox Experiment Demonstration

    NASA Astrophysics Data System (ADS)

    Cardiff, M. A.; Zhou, Y.

    2015-12-01

    Characterizing the distribution and extent of NAPL contamination is an important step in determining appropriate remedial actions. NAPL has a complex mode of transportation in the heterogeneous subsurface domain, which results in difficulties for cleaning up contaminated sites. Here, we use sandbox experiments to demonstrate the effectiveness of Oscillatory Hydraulic Tomography (OHT) for NAPL source zone characterization. In a saturated soil fluid system, the effective hydraulic conductivity (K) is dependent on the soil properties, fluid density, and fluid viscosity. By taking advantage of the differences of fluid properties before and after NAPL intrusion, we can estimate the NAPL source zone migration throughout time by imaging changes in effective K. Using OHT testing, we can derive the K heterogeneities before, during and after NAPL intrusion. NAPL source zone can be located by subtracting the background K from the K tomogram after NAPL intrusion. This approach can avoid mass extraction and injection that occurs in traditional hydraulic tomography approaches while obtain a good estimation of subsurface K heterogeneity and NAPL migration. We believe this method is more cost effective and efficient for field remediation applications.

  9. Residents’ Preferences for Household Kitchen Waste Source Separation Services in Beijing: A Choice Experiment Approach

    PubMed Central

    Yuan, Yalin; Yabe, Mitsuyasu

    2014-01-01

    A source separation program for household kitchen waste has been in place in Beijing since 2010. However, the participation rate of residents is far from satisfactory. This study was carried out to identify residents’ preferences based on an improved management strategy for household kitchen waste source separation. We determine the preferences of residents in an ad hoc sample, according to their age level, for source separation services and their marginal willingness to accept compensation for the service attributes. We used a multinomial logit model to analyze the data, collected from 394 residents in Haidian and Dongcheng districts of Beijing City through a choice experiment. The results show there are differences of preferences on the services attributes between young, middle, and old age residents. Low compensation is not a major factor to promote young and middle age residents accept the proposed separation services. However, on average, most of them prefer services with frequent, evening, plastic bag attributes and without instructor. This study indicates that there is a potential for local government to improve the current separation services accordingly. PMID:25546279

  10. Residents' preferences for household kitchen waste source separation services in Beijing: a choice experiment approach.

    PubMed

    Yuan, Yalin; Yabe, Mitsuyasu

    2015-01-01

    A source separation program for household kitchen waste has been in place in Beijing since 2010. However, the participation rate of residents is far from satisfactory. This study was carried out to identify residents' preferences based on an improved management strategy for household kitchen waste source separation. We determine the preferences of residents in an ad hoc sample, according to their age level, for source separation services and their marginal willingness to accept compensation for the service attributes. We used a multinomial logit model to analyze the data, collected from 394 residents in Haidian and Dongcheng districts of Beijing City through a choice experiment. The results show there are differences of preferences on the services attributes between young, middle, and old age residents. Low compensation is not a major factor to promote young and middle age residents accept the proposed separation services. However, on average, most of them prefer services with frequent, evening, plastic bag attributes and without instructor. This study indicates that there is a potential for local government to improve the current separation services accordingly. PMID:25546279

  11. Experiments and simulations of a large area ECR source as an electric propulsion neutralizer

    NASA Astrophysics Data System (ADS)

    Hidaka, Yoshiteru

    The windowed electron cyclotron resonance (ECR) source, invented by Getty, was modified into a windowless ECR source to investigate the potential use of this device as an electron source for the neutralizer of an ion thruster system. This plasma source utilizes linear arrays of permanent magnets placed at the end of a large S-band microwave horn. These magnets are held inside a grill with alternating rows of open spaces and aluminum cross bars. The metal bars are cross-polarized so that microwave radiation transmits through the grill with low reflection. The peak electron density and electron temperature measured 1 cm from the grill surface were 5 x 1010 cm-3 and 10 eV, respectively, for 200 W input microwave power and 1 mTorr argon gas pressure. At the axial distance of 25 cm from the grill surface, these values were 1 x 1010 cm-3 and 4 eV, respectively. The extracted electron current with pulsed bias increased with collector areas and with input microwave powers, as expected, though the increase was not linear. Unexpectedly, however, the current increased as the distance of the collector from the resonance zone was increased. With microwave circuit optimization, the pulsed electron current achieved 0.77 A with a 30-V bias voltage applied to a graphite collector (7.3 cm x 10.7 cm, located 28.3 cm from the grill surface), 200 W input microwave power, and 1 mTorr argon gas pressure. For DC extraction with the same settings, an electron current of 0.51 A was extracted. The 2D simulations using the MAGIC computer code demonstrated electrons gain energy only near the ECR zone (875 gauss contour). The effectiveness of the steel pole pieces designed for the windowless Getty source was also confirmed. The curvature in either electric or magnetic field profile was verified as a necessary condition for ECR to take place. Electron trajectory plots using the TriComp computer code showed electron trapping by the magnetic mirrors. Both experiments and simulations indicated that

  12. Hanford Tank Waste - Near Source Treatment of Low Activity Waste

    SciTech Connect

    Ramsey, William Gene

    2013-08-15

    Abstract only. Treatment and disposition of Hanford Site waste as currently planned consists of 100+ waste retrievals, waste delivery through up to 8+ miles of dedicated, in-ground piping, centralized mixing and blending operations- all leading to pre-treatment combination and separation processes followed by vitrification at the Hanford Tank Waste Treatment and Immobilization Plant (WTP). The sequential nature of Tank Farm and WTP operations requires nominally 15-20 years of continuous operations before all waste can be retrieved from many Single Shell Tanks (SSTs). Also, the infrastructure necessary to mobilize and deliver the waste requires significant investment beyond that required for the WTP. Treating waste as closely as possible to individual tanks or groups- as allowed by the waste characteristics- is being investigated to determine the potential to 1) defer, reduce, and/or eliminate infrastructure requirements, and 2) significantly mitigate project risk by reducing the potential and impact of single point failures. The inventory of Hanford waste slated for processing and disposition as LAW is currently managed as high-level waste (HLW), i.e., the separation of fission products and other radionuclides has not commenced. A significant inventory of this waste (over 20M gallons) is in the form of precipitated saltcake maintained in single shell tanks, many of which are identified as potential leaking tanks. Retrieval and transport (as a liquid) must be staged within the waste feed delivery capability established by site infrastructure and WTP. Near Source treatment, if employed, would provide for the separation and stabilization processing necessary for waste located in remote farms (wherein most of the leaking tanks reside) significantly earlier than currently projected. Near Source treatment is intended to address the currently accepted site risk and also provides means to mitigate future issues likely to be faced over the coming decades. This paper

  13. Heat Transfer by Thermo-capillary Convection -Sounding Rocket COMPERE Experiment SOURCE

    NASA Astrophysics Data System (ADS)

    Dreyer, Michael; Fuhrmann, Eckart

    The sounding rocket COMPERE experiment SOURCE was successfully flown on MASER 11, launched in Kiruna (ESRANGE), May 15th, 2008. SOURCE has been intended to partly ful-fill the scientific objectives of the European Space Agency (ESA) Microgravity Applications Program (MAP) project AO-2004-111 (Convective boiling and condensation). Three parties of principle investigators have been involved to design the experiment set-up: ZARM for thermo-capillary flows, IMFT (Toulouse, France) for boiling studies, EADS Astrium (Bremen, Ger-many) for depressurization. The topic of this paper is to study the effect of wall heat flux on the contact line of the free liquid surface and to obtain a correlation for a convective heat trans-fer coefficient. The experiment has been conducted along a predefined time line. A preheating sequence at ground was the first operation to achieve a well defined temperature evolution within the test cell and its environment inside the rocket. Nearly one minute after launch, the pressurized test cell was filled with the test liquid HFE-7000 until a certain fill level was reached. Then the free surface could be observed for 120 s without distortion. Afterwards, the first depressurization was started to induce subcooled boiling, the second one to start saturated boiling. The data from the flight consists of video images and temperature measurements in the liquid, the solid, and the gaseous phase. Data analysis provides the surface shape versus time and the corresponding apparent contact angle. Computational analysis provides information for the determination of the heat transfer coefficient in a compensated gravity environment where a flow is caused by the temperature difference between the hot wall and the cold liquid. The paper will deliver correlations for the effective contact angle and the heat transfer coefficient as a function of the relevant dimensionsless parameters as well as physical explanations for the observed behavior. The data will be used

  14. Effect of sole nitrogen sources and temperature on activated sludge

    SciTech Connect

    Mines, R.O. Jr.; Sherrard, J.H.

    1999-07-01

    The effects of temperature on biokinetic coefficients used to design aerobic biological systems treating nitrogen deficient wastewaters at a COD: TKN ratio of 13.7:1 are presented. The impact of temperature on substrate removal, waste biosolids production, and oxygen requirements with the effects of nitrification is delineated at temperatures of 5 C, 10 C, 20 C, and 30 C for two nitrogen sources; ammonia and nitrate. Temperature correction coefficients ({theta}) are presented and the implications for the design and operation of suspended growth biological systems are discussed.

  15. How to Detect Amygdala Activity with Magnetoencephalography using Source Imaging

    PubMed Central

    Balderston, Nicholas L.; Schultz, Douglas H.; Baillet, Sylvain; Helmstetter, Fred J.

    2013-01-01

    In trace fear conditioning a conditional stimulus (CS) predicts the occurrence of the unconditional stimulus (UCS), which is presented after a brief stimulus free period (trace interval)1. Because the CS and UCS do not co-occur temporally, the subject must maintain a representation of that CS during the trace interval. In humans, this type of learning requires awareness of the stimulus contingencies in order to bridge the trace interval2-4. However when a face is used as a CS, subjects can implicitly learn to fear the face even in the absence of explicit awareness*. This suggests that there may be additional neural mechanisms capable of maintaining certain types of "biologically-relevant" stimuli during a brief trace interval. Given that the amygdala is involved in trace conditioning, and is sensitive to faces, it is possible that this structure can maintain a representation of a face CS during a brief trace interval. It is challenging to understand how the brain can associate an unperceived face with an aversive outcome, even though the two stimuli are separated in time. Furthermore investigations of this phenomenon are made difficult by two specific challenges. First, it is difficult to manipulate the subject's awareness of the visual stimuli. One common way to manipulate visual awareness is to use backward masking. In backward masking, a target stimulus is briefly presented (< 30 msec) and immediately followed by a presentation of an overlapping masking stimulus5. The presentation of the mask renders the target invisible6-8. Second, masking requires very rapid and precise timing making it difficult to investigate neural responses evoked by masked stimuli using many common approaches. Blood-oxygenation level dependent (BOLD) responses resolve at a timescale too slow for this type of methodology, and real time recording techniques like electroencephalography (EEG) and magnetoencephalography (MEG) have difficulties recovering signal from deep sources. However

  16. Surface Deformation by Thermo-capillary Convection -Sounding Rocket COMPERE Experiment SOURCE

    NASA Astrophysics Data System (ADS)

    Fuhrmann, Eckart; Dreyer, Michael E.

    The sounding rocket COMPERE experiment SOURCE was successfully flown on MASER 11, launched in Kiruna (ESRANGE), May 15th, 2008. SOURCE has been intended to partly ful-fill the scientific objectives of the European Space Agency (ESA) Microgravity Applications Program (MAP) project AO-2004-111 (Convective boiling and condensation). Three parties of principle investigators have been involved to design the experiment set-up: ZARM for thermo-capillary flows, IMFT (Toulouse, France) for boiling studies, EADS Astrium (Bremen, Ger-many) for depressurization. The scientific aims are to study the effect of wall heat flux on the contact line of the free liquid surface and to obtain a correlation for a convective heat transfer coefficient. The experiment has been conducted along a predefined time line. A preheating sequence at ground was the first operation to achieve a well defined temperature evolution within the test cell and its environment inside the rocket. Nearly one minute after launch, the pressurized test cell was filled with the test liquid HFE-7000 until a certain fill level was reached. Then the free surface could be observed for 120 s without distortion. Afterwards, the first depressurization was started to induce subcooled boiling, the second one to start saturated boiling. The data from the flight consists of video images and temperature measurements in the liquid, the solid, and the gaseous phase. Data analysis provides the surface shape versus time and the corresponding apparent contact angle. Computational analysis provides information for the determination of the heat transfer coefficient in a compensated gravity environment where a flow is caused by the temperature difference between the hot wall and the cold liquid. Correlations for the effective contact angle and the heat transfer coefficient shall be delivered as a function of the relevant dimensionsless parameters. The data will be used for benchmarking of commercial CFD codes and the tank design

  17. An active seismic experiment at Tenerife Island (Canary Island, Spain): Imaging an active volcano edifice

    NASA Astrophysics Data System (ADS)

    Garcia-Yeguas, A.; Ibañez, J. M.; Rietbrock, A.; Tom-Teidevs, G.

    2008-12-01

    An active seismic experiment to study the internal structure of Teide Volcano was carried out on Tenerife, a volcanic island in Spain's Canary Islands. The main objective of the TOM-TEIDEVS experiment is to obtain a 3-dimensional structural image of Teide Volcano using seismic tomography and seismic reflection/refraction imaging techniques. At present, knowledge of the deeper structure of Teide and Tenerife is very limited, with proposed structural models mainly based on sparse geophysical and geological data. This multinational experiment which involves institutes from Spain, Italy, the United Kingdom, Ireland, and Mexico will generate a unique high resolution structural image of the active volcano edifice and will further our understanding of volcanic processes.

  18. Rotatable spin-polarized electron source for inverse-photoemission experiments

    SciTech Connect

    Stolwijk, S. D. Wortelen, H.; Schmidt, A. B.; Donath, M.

    2014-01-15

    We present a ROtatable Spin-polarized Electron source (ROSE) for the use in spin- and angle-resolved inverse-photoemission (SR-IPE) experiments. A key feature of the ROSE is a variable direction of the transversal electron beam polarization. As a result, the inverse-photoemission experiment becomes sensitive to two orthogonal in-plane polarization directions, and, for nonnormal electron incidence, to the out-of-plane polarization component. We characterize the ROSE and test its performance on the basis of SR-IPE experiments. Measurements on magnetized Ni films on W(110) serve as a reference to demonstrate the variable spin sensitivity. Moreover, investigations of the unoccupied spin-dependent surface electronic structure of Tl/Si(111) highlight the capability to analyze complex phenomena like spin rotations in momentum space. Essentially, the ROSE opens the way to further studies on complex spin-dependent effects in the field of surface magnetism and spin-orbit interaction at surfaces.

  19. Multi-level continuous active source seismic monitoring (ML-CASSM): Application to shallow hydrofracture monitoring

    NASA Astrophysics Data System (ADS)

    Ajo Franklin, J. B.; Daley, T. M.; Butler-Veytia, B.; Peterson, J.; Gasperikova, E.; Hubbard, S. S.

    2010-12-01

    Induced subsurface processes occur over a wide variety of time scales ranging from seconds (e.g. fracture initiation) to days (e.g. unsteady multiphase flow) and weeks (e.g. induced mineral precipitation). Active source seismic monitoring has the potential to dynamically characterize such alterations and allow estimation of spatially localized rates. However, even optimal timelapse seismic surveys have limited temporal resolution due to both the time required to acquire a survey and the cost of continuous field deployment of instruments and personnel. Traditional timelapse surveys are also limited by experimental repeatability due to a variety of factors including geometry replication and near-surface conditions. Recent research has demonstrated the value of semi-permanently deployed seismic systems with fixed sources and receivers for use in monitoring a variety of processes including near-surface stress changes (Silver et.al. 2007), subsurface movement of supercritical CO2 (Daley et.al. 2007), and preseismic velocity changes in fault regions (Niu et. al. 2008). This strategy, referred to as continuous active source seismic monitoring (CASSM), allows both precise quantification of traveltime changes on the order of 1.1 x 10-7 s and temporal sampling on the order of minutes. However, as previously deployed, CASSM often sacrifices spatial resolution for temporal resolution with previous experiments including only a single source level. We present results from the first deployment of CASSM with a large number of source levels under automated control. Our system is capable of autonomously acquiring full tomographic datasets (10 sources, 72 receivers) in 3 minutes without human intervention, thus allowing active source seismic imaging (rather than monitoring) of processes with short durations. Because no sources or receivers are moved in the acquisition process, signal repeatability is excellent and subtle waveform changes can be interpreted with increased confidence

  20. Waste tires: A future source of activated carbon?

    SciTech Connect

    1996-01-01

    Millions of used tires are disposed in the United States each year, causing major environmental problems and representing a loss of valuable resources. Currently, over 80% of discarded tires are landfilled (approximately 200 million per year). Because tires disposed in municipal landfills rarely stay buried, regulators, landfill operators, and even the general public are constantly reminded of this problem. These ever-surfacing tires can serve as a breeding ground for disease-causing mosquitoes; in addition, large mounds of tires often catch fire, causing significant air pollution. Recent research indicates that used tires may soon represent a source of carbon-based adsorbents and energy-rich liquid and gaseous hydrocarbons. Details of this research are discussed briefly in this paper. 3 refs., 2 figs.

  1. Laser ion source activities at Brookhaven National Laboratory

    DOE PAGESBeta

    Kanesue, Takeshi; Okamura, Masahiro

    2015-07-31

    In Brookhaven National Laboratory (BNL), we have been developing laser ion sources for diverse accelerators. Tabletop Nd:YAG lasers with up to several Joules of energy are mainly used to create ablation plasmas for stable operations. The obtained charge states depend on laser power density and target species. Two types of ion extraction schemes, Direct Plasma Injection Scheme (DPIS) and conventional static extraction, are used depending on application. We optimized and select a suitable laser irradiation condition and a beam extraction scheme to meet the requirement of the following accelerator system. We have demonstrated to accelerate more than 5 x 1010more » of C6+ ions using the DPIS. We successfully commissioned low charge ion beam provider to the user facilities in BNL. As a result, to achieve higher current, higher charge state and lower emittance, further studies will continue.« less

  2. Laser ion source activities at Brookhaven National Laboratory

    SciTech Connect

    Kanesue, Takeshi; Okamura, Masahiro

    2015-07-31

    In Brookhaven National Laboratory (BNL), we have been developing laser ion sources for diverse accelerators. Tabletop Nd:YAG lasers with up to several Joules of energy are mainly used to create ablation plasmas for stable operations. The obtained charge states depend on laser power density and target species. Two types of ion extraction schemes, Direct Plasma Injection Scheme (DPIS) and conventional static extraction, are used depending on application. We optimized and select a suitable laser irradiation condition and a beam extraction scheme to meet the requirement of the following accelerator system. We have demonstrated to accelerate more than 5 x 1010 of C6+ ions using the DPIS. We successfully commissioned low charge ion beam provider to the user facilities in BNL. As a result, to achieve higher current, higher charge state and lower emittance, further studies will continue.

  3. Design support of the Burst and Transient Source Experiment (BATSE) of the Gamma Ray Observatory (GRO) mission

    NASA Technical Reports Server (NTRS)

    Stephan, E. A., Jr.

    1986-01-01

    Engineering design specifications and development of the large area detector and photomultiplier tube assemblies for the Burst and Transient Source Experiment (BATSE) of the Gamma Ray Observatory (GRO) mission are examined.

  4. Active experiments, magnetospheric modification, and a naturally occurring analogue

    NASA Technical Reports Server (NTRS)

    Kivelson, M. G.; Russell, C. T.

    1973-01-01

    Recently, a scheme has been proposed which would modify the magnetosphere by injecting plasma near the equator beyond the plasmapause and initiating wave-particle instabilities. The expected effects have been examined theoretically. Injection of plasma into this region is also a naturally occurring phenomenon produced by the cross-tail electric fields which are associated with geomagnetic activity. For further investigation of magnetospheric instabilities, the advantages of examining artificially injected plasma (control of time and location of injection and of the volume of plasma injected) contrast with the advantages of studying natural enhancements (no extra payload, frequent occurrence). Thus, the two types of experiments are complementary. In preliminary studies of natural plasma enhancements both ULF and ELF emissions have been observed. The ELF noise is consistent with generation by the electron cyclotron instability.

  5. Convoy active safety technologies war fighter experiment II

    NASA Astrophysics Data System (ADS)

    Schoenherr, Edward W.

    2009-01-01

    The operational ability to project and sustain forces in distant, anti-access and area denial environments poses new challenges for combatant commanders. One of the new challenges is the ability to conduct sustainment operations at operationally feasible times and places on the battlefield. Combatant commanders require a sustainment system that is agile, versatile, and survivable throughout the range of military operations and across the spectrum of conflict. A key component of conducting responsive, operationally feasible sustainment operations is the ability to conduct sustainment convoys. Sustainment convoys are critical to providing combatant commanders the right support, at the right time and place, and in the right quantities, across the full range of military operations. The ability to conduct sustainment convoys in a variety of hostile environments require force protection measures that address the enemy threat and protect the Soldier. One cost effective, technically feasible method of increasing the force protection for sustainment convoys is the use of robotic follower technology and autonomous navigation. The Convoy Active Safety Technologies (CAST) system is a driver assist, convoy autopilot technology aimed to address these issues. The CAST Warfigher Experiment II, being held at The Nevada Automotive Test Center in the fall of 2008, will continue analysis of the utility of this vehicle following technology not only in measures of system integrity and performance vs. manual driving, but also the physiological effects on the operators themselves. This paper will detail this experiment's methodology and analysis. Results will be presented at the SPIE Electronic Imaging 2009 symposium.

  6. 129Xe EDM Search Experiment Using Active Nuclear Spin Maser

    NASA Astrophysics Data System (ADS)

    Sato, Tomoya; Ichikawa, Yuichi; Ohtomo, Yuichi; Sakamoto, Yu; Kojima, Shuichiro; Suzuki, Takahiro; Shirai, Hazuki; Chikamori, Masatoshi; Hikota, Eri; Miyatake, Hirokazu; Nanao, Tsubasa; Suzuki, Kunifumi; Tsuchiya, Masato; Inoue, Takeshi; Furukawa, Takeshi; Yoshimi, Akihiro; Bidinosti, Christopher P.; Ino, Takashi; Ueno, Hideki; Matsuo, Yukari; Fukuyama, Takeshi; Asahi, Koichiro

    An active nuclear spin maser, which enables a precision measurement of spin precession frequency, is employed in the experimental search for permanent electric dipole moment (EDM) in the diamagnetic atom 129Xe. In order to eliminate systematic errors which limit the sensitivity of the experiment to an EDM, the following tactics are adopted: (i) 3He comagnetometry for the cancellation of long-term drifts in the external magnetic fields and (ii) double-cell geometry for the mitigation of frequency shifts due to interaction of 129Xe spin with polarized Rb atoms. In the present work, the design for the double-cell has been changed and a magnetic shield-coil system to provide a highly homogeneous magnetic field has been newly introduced. Thanks to increased polarization and longer 3He spin relaxation time, the dual-species maser of 129Xe and 3He in a double-cell geometry operated successfully. Our experiment is now at the stage of assembling these separate technical elements in order to start the measurement of 129Xe EDM in the 10-28 ecm region.

  7. The high precision measurement of the 144Ce activity in the SOX experiment

    NASA Astrophysics Data System (ADS)

    Di Noto, L.; Agostini, M.; Althenmüller, K.; Appel, S.; Bellini, G.; Benziger, J.; Berton, N.; Bick, D.; Bonfini, G.; Bravo—Berguño, D.; Caccianiga, B.; Calaprice, F.; Caminata, A.; Cavalcante, P.; Cereseto, R.; Chepurnov, A.; Choi, K.; Cribier, M.; DAngelo, D.; Davini, S.; Derbin, A.; Drachnev, I.; Durero, M.; Etenko, A.; Farinon, S.; Fischer, V.; Fomenko, K.; Franco, D.; Gabriele, F.; Gaffiot, J.; Galbiati, C.; Ghiano, C.; Giammarchi, M.; Göeger-Neff, M.; Goretti, A.; Gromov, M.; Hagner, C.; Houdy, Th; Hungerford, E.; Ianni, Aldo; Ianni, Andrea; Jonquères, N.; Jedrzejczak, K.; Kaiser, M.; Kobychev, V.; Korablev, D.; Korga, G.; Kornoukhov, V.; Kryn, D.; Lachenmaier, T.; Lasserre, T.; Laubenstein, M.; Lehnert, T.; Link, J.; Litvinovich, E.; Lombardi, F.; Lombardi, P.; Ludhova, L.; Lukyanchenko, G.; Machulin, I.; Manecki, S.; Maneschg, W.; Marcocci, S.; Maricic, J.; Mention, G.; Meroni, E.; Meyer, M.; Miramonti, L.; Misiaszek, M.; Montuschi, M.; Mosteiro, P.; Muratova, V.; Musenich, R.; Neumair, B.; Oberauer, L.; Obolensky, M.; Ortica, F.; Pallavicini, M.; Papp, L.; Perasso, L.; Pocar, A.; Ranucci, G.; Razeto, A.; Re, A.; Romani, A.; Roncin, R.; Rossi, C.; Rossi, N.; Schönert, S.; Scola, L.; Semenov, D.; Simgen, H.; Skorokhvatov, M.; Smirnov, O.; Sotnikov, A.; Sukhotin, S.; Suvorov, Y.; Tartaglia, R.; Testera, G.; Thurn, J.; Toropova, M.; Veyssière, C.; Vivier, M.; Unzhakov, E.; Vogelaar, R. B.; von Feilitzsch, F.; Wang, H.; Weinz, S.; Winter, J.; Wojcik, M.; Wurm, M.; Yokley, Z.; Zaimidoroga, O.; Zavatarelli, S.; Zuber, K.; Zuzel, G.

    2016-02-01

    In order to perform a resolutive measurement to clarify the neutrino anomalies and to observe possible short distance neutrino oscillations, the SOX (Short distance neutrino Oscillations with BoreXino) experiment is under construction. In the first phase, a 100 kCi 144Ce-144Pr antineutrino source will be placed under the Borexino detector at the Laboratori Nazionali del Gran Sasso (LNGS), in center of Italy, and the rate measurement of the antineutrino events, observed by the very low radioactive background Borexino detector, will be compared with the high precision (< 1%) activity measurement performed by two calorimeters. The source will be embedded in a 19 mm thick tungsten alloy shield and both the calorimeters have been conceived for measuring the thermal heat absorbed by a water flow. In this report the design of the calorimeters will be described in detail and very preliminary results will be also shown.

  8. Sources of tropical Atlantic coupled model biases derived from initialised hindcasts and partially coupled sensitivity experiments

    NASA Astrophysics Data System (ADS)

    Deppenmeier, Anna-Lena; Hazeleger, Wilco; Haarsma, Rein; Prodhomme, Chloé; Exarchou, Eleftheria; Doblas-Reyes, Francisco J.

    2016-04-01

    State-of-the-art coupled general circulation models (CGCMs) still fail to simulate the mean state and variability of the tropical Atlantic (TA) climate correctly. We investigate the importance of air-sea interaction at different regions in the TA by means of performing partially coupled sensitivity experiments with the state-of-the-art CGCM EC-Earth3.1. All simulations are intialised from the observed climate state. By studying the initial drift in sensitivity experiments we obtain insight into the tropical dynamics and sources of model bias. We test the influence of realistic wind stress forcing over different regions of the TA on the development of SST as well as other oceanic biases. A series of hindcasts fully initialised in May and run until the end of August are performed with prescribed ERA-Interim zonal and meridional wind stresses over three different regions: firstly, we force the entire TA from 15N - 30S. Secondly, we force the equatorial band only between 5N - 5S, and finally we force the coastal area of the Angola Benguela upwelling region between 0W and the coast and between 5S - 30N. Our setup only affects the oceanic forcing and leaves the atmosphere free to adapt, such that we can identify the air-sea interaction processes in the different regions and their effect on the SST bias in the fully coupled system. The differences between forcing the entire TA and the equatorial region only are very small, which hints to the great importance of the relatively narrow equatorial region. The coastal upwelling area does not strongly affect the equatorial region in our model. We identify the equatorial band as most susceptible to errors in the wind stress forcing and, due to the strong atmosphere-ocean coupling, as source of the main biases in our model. The partially coupled experiments with initialised seasonal hindcasts appear to be a powerful tool to identify the sources of model biases and to identify relevant air-sea interaction processes in the TA.

  9. ECH by FEL and gyrotron sources on the Microwave Tokamak Experiment (MTX) tokamak

    SciTech Connect

    Stallard, B.W.; Turner, W.C.; Allen, S.L.; Byers, J.A.; Felker, B.; Fenstermacher, M.E.; Ferguson, S.W.; Hooper, E.G.; Thomassen, K.I.; Throop, A.L. ); Makowski, M.A. )

    1990-08-09

    The Microwave Tokamak Experiment (MTX) at LLNL is studying the physics of intense pulse ECH is a high-density tokamak plasma using a microwave FEL. Related technology development includes the FEL, a windowless quasi-optical transmission system, and other microwave components. Initial plasma experiments have been carried out at 140 GHz with single rf pulses generated using the ETA-II accelerator and the ELF wiggler. Peak power levels up to 0.2 GW and pulse durations up to 10 ns were achieved for injection into the plasma using as untapered wiggler. FEL pulses were transmitted over 33 m from the FEL to MTX using six mirrors mounted in a 50-cm-diam evacuated pipe. Measurements of the microwave beam and transmission through the plasma were carried out. For future rapid pulse experiments at high average power (4 GW peak power, 5kHz pulse rate, and {bar P} > 0.5 MW) using the IMP wiggler with tapered magnetic field, a gyrotron (140 GHz, 400 kW cw or up to 1 MW short pulse) is being installed to drive the FEL input or to directly heat the tokamak plasma at full gyrotron power. Quasi-optic techniques will be used to couple the gyrotron power. For direct plasma heating, the gyrotron will couple into the existing mirror transport system. Using both sources of rf generation, experiments are planned to investigate intense pulse absorption and tokamak physics, such as the ECH of a pellet-fueled plasma and plasma control using localized heating. 12 refs., 9 figs.

  10. FAME: Freeform Active Mirrors Experiment: manufacturing process development

    NASA Astrophysics Data System (ADS)

    Challita, Zalpha; Hugot, Emmanuel; Venema, Lars; Schnetler, Hermine; Ferrari, Marc; Cuby, Jean-Gabriel

    2014-07-01

    Extreme freeform mirrors couple a non-axisymmetrical shape and an extreme asphericity, i.e. more than one millimeter of deviation from the best fit sphere. In astronomical instrumentation, such a large asphericity allows compact instruments, using less optical components. However, the lack of freeform mirrors manufacturing facilities is a real issue. We present the concept and development of an innovative manufacturing process based on plasticity forming which allow imprinting permanent deformations on mirrors, following a pre-defined mold. The aim of this activity, pursued in the frame of the OPTICON-FAME (Freeform Active Mirrors Experiment) project, is to demonstrate the suitability of this method for VIS/NIR/MIR applications. The process developed can operate on thin and flat polished initial substrates. Three study cases have been highlighted by FEA (Finite Element Analysis) and the real tests associated were performed on thin substrates in AISI420b stainless steel with 100 mm optical diameter. A comparison between FEA and tests is performed to study the evolution of the mechanical behaviour and the optical quality. The opto-mechanical results will allow a fine tuning of FEA parameters to optimize the residual form errors obtained through this process to converge toward an innovative and recurrent process.

  11. Diffuse optical imaging of brain activation to joint attention experience.

    PubMed

    Zhu, Banghe; Yadav, Nitin; Rey, Gustavo; Godavarty, Anuradha

    2009-08-24

    In the early development of social cognition and language, infants tend to participate in face-to-face interactions engaging in joint attention exchanges. Joint attention is vital to social competence at all ages, lacking which is a primary feature to distinguish autistic from non-autistic population. In this study, diffuse optical imaging is used for the first time to investigate the joint attention experience in normal adults. Imaging studies were performed in the frontal regions of the brain (BA9 and BA10) in order to study the differences in the brain activation in response to video clips corresponding to joint attention based skills. The frontal regions of the brain were non-invasively imaged using a novel optical cap coupled to a frequency-domain optical imaging system. The statistical analysis from 11 normal adult subjects, with three repetitions from each subject, indicated that the averaged changes in the cerebral blood oxygenation levels were different under the joint and non-joint attention based stimulus. The preliminary studies demonstrate the feasibility of implementing diffuse optical imaging towards autism-related research to study the brain activation in response to socio-communication skills. PMID:19447278

  12. EXPERIENCE WITH COLLABORATIVE DEVELOPMENT FOR THE SPALLATION NEUTRON SOURCE FROM A PARTNER LAB PERSPECTIVE.

    SciTech Connect

    HOFF, L.T.

    2005-10-10

    Collaborative development and operation of large physics experiments is fairly common. Less common is the collaborative development or operation of accelerators. A current example of the latter is the Spallation Neutron Source (SNS). The SNS project was conceived as a collaborative effort between six DOE facilities. In the SNS case, the control system was also developed collaboratively. The SNS project has now moved beyond the collaborative development phase and into the phase where Oak Ridge National Lab (ORNL) is integrating contributions from collaborating ''partner labs'' and is beginning accelerator operations. In this paper, the author reflects on the benefits and drawbacks of the collaborative development of an accelerator control system as implemented for the SNS project from the perspective of a partner lab.

  13. Construction of a Visible Diode Laser Source for Free Radical Photochemistry and Spectroscopy Experiments

    NASA Technical Reports Server (NTRS)

    Newman, Bronjelyn; Halpern, Joshua B.

    1997-01-01

    Tunable diode lasers are reliable sources of narrow-band light and comparatively cheap. Optical feedback simplifies frequency tuning of the laser diodes. We are building an inexpensive diode laser system incorporating optical feedback from a diffraction grating. The external optical cavity can be used with lasers that emit between 2 and 100 mW, and will also work if they are pulsed, although this will significantly degrade the bandwidth. The diode laser output power and bandwidth are comparable to CW dye lasers used in kinetics and dynamics experiments. However, their cost and maintenance will be much less as will alignment time. We intend to use the diode lasers to investigate CN and C2 kinetics as well as to study dissociation dynamics of atmospherically important molecules.

  14. An open-source software package for data treatment in a MIEZE experiment

    NASA Astrophysics Data System (ADS)

    Weber, T.; Brandl, G.; Georgii, R.; Böni, P.

    2014-07-01

    We present a newly-developed open-source software toolkit for handling and analysing the 4-dimensional datasets generated by modern multi-layer time-of-flight (TOF) position-sensitive detectors (PSD). Two such detectors of the type "Cascade" are in operation at the MIEZE beam line MIRA 2 and at the neutron resonance spin-echo spectrometer RESEDA at FRM II. The software consists of several modules for data analysis and instrument parameter calculations to assist the user during experiments, during simulations and in data evaluation. Specifically for the Cascade detector, it contains modules that correct phase-shifts in the MIEZE signal caused by the detector geometry and layout.

  15. First results from the Los Alamos plasma source ion implantation experiment

    SciTech Connect

    Rej, D.J.; Faehl, R.J.; Gribble, R.J.; Henins, I.; Kodali, P.; Nastasi, M.; Reass, W.A.; Tesmer, J.; Walter, K.C.; Wood, B.P.; Conrad, J.R.; Horswill, N.; Shamim, M.; Sridharan, K.

    1993-12-01

    A new facility is operational at Los Alamos to examine plasma source ion implantation on a large scale. Large workpieces can be treated in a 1.5-m-diameter, 4.6-m-long plasma vacuum chamber. Primary emphasis is directed towards improving tribological properties of metal surfaces. First experiments have been performed at 40 kV with nitrogen plasmas. Both coupons and manufactured components, with surface areas up to 4 m{sup 2}, have been processed. Composition and surface hardness of implanted materials are evaluated. Implant conformality and dose uniformity into practical geometries are estimated with multidimensional particle-in-cell computations of plasma electron and ion dynamics, and Monte Carlo simulations of ion transport in solids.

  16. Site Characterization of the Source Physics Experiment Phase II Location Using Seismic Reflection Data

    SciTech Connect

    Sexton, Emily; Snelson, Catherine M; Chipman, Veraun D; Emer, Dudley; White, Bob; Emmit, Ryan; Wright, Al; Drellack, Sigmund; Huckins-Gang, Heather; Mercadante, Jennifer; Floyd, Michael; McGowin, Chris; Cothrun, Chris; Bonal, Nedra

    2013-12-05

    An objective of the Source Physics Experiment (SPE) is to identify low-yield nuclear explosions from a regional distance. Low-yield nuclear explosions can often be difficult to discriminate among the clutter of natural and man-made explosive events (e.g., earthquakes and mine blasts). The SPE is broken into three phases. Phase I has provided the first of the physics-based data to test the empirical models that have been used to discriminate nuclear events. The Phase I series of tests were placed within a highly fractured granite body. The evolution of the project has led to development of Phase II, to be placed within the opposite end member of geology, an alluvium environment, thereby increasing the database of waveforms to build upon in the discrimination models. Both the granite and alluvium sites have hosted nearby nuclear tests, which provide comparisons for the chemical test data. Phase III of the SPE is yet to be determined.

  17. Dr. Fishman Reviewing Data From the Burst and Transient Source Experiment (BATSE)

    NASA Technical Reports Server (NTRS)

    1996-01-01

    In this photograph, Dr. Gerald Fishman of the Marshall Space Flight Center (MSFC), a principal investigator of the Compton Gamma-Ray Observatory's (GRO's) instrument, the Burst and Transient Source Experiment (BATSE), and Dr. Chryssa Kouveliotou of Universities Space Research Associates review data from the BATSE. For nearly 9 years, GRO's Burst and Transient Source Experiment (BATSE), designed and built by the Marshall Space Flight Center, kept a blinking watch on the universe to alert scientist to the invisible, mysterious gamma-ray bursts. By studying gamma-rays from objects like black holes, pulsars, quasars, neutron stars, and other exotic objects, scientists could discover clues to the birth, evolution, and death of stars, galaxies, and the universe. The gamma-ray instrument was one of four major science instruments aboard the Compton. It consisted of eight detectors, or modules, located at each corner of the rectangular satellite to simultaneously scan the entire universe for bursts of gamma-rays ranging in duration from fractions of a second to minutes. Because gamma-rays are so powerful, they pass through conventional telescope mirrors. Instead of a mirror, the heart of each BATSE module was a large, flat, transparent crystal that generated a tiny flash of light when struck by a gamma-ray. With an impressive list of discoveries and diverse accomplishments, BATSE could claim to have rewritten astronomy textbooks. Launched aboard the Space Shuttle Orbiter Atlantis during the STS-35 mission in April 1991, the GRO reentered the Earth's atmosphere and ended its successful 9-year mission in June 2000.

  18. Pulsed neutrons: one year of experience with the new source at Argonne National Laboratory

    SciTech Connect

    Lander, G.H.

    1982-01-01

    The Intense Pulsed Neutron Source (IPNS) at Argonne National Laboratory is a spallation neutron source based on a 500-MeV proton accelerator operating at 30 Hz and with an average proton current of approx. 10 ..mu..A. Neutron-scattering instruments for elastic scattering include two powder diffractometers, a single-crystal diffractometer based on the Laue method and employing a large (30 x 30 cm) position-sensitive scintillation detector, a small-angle diffractometer using a position-sensitive detector, and a polarized-neutron diffractometer which will utilize the spin-refrigerator device to obtain a beam of white polarized neutrons. For inelastic scattering, we presently have the crystal-analyzer spectrometer and two chopper spectrometers capable of providing monoenergetic incident neutron beams of between 100 and 600 MeV. From its inception IPNS has been operating in a user mode and the selection of experiments is made by a Program Committee twice a year on the basis of the scientific merit of submitted proposals.

  19. Electron cyclotron resonance ion source experience at the Heidelberg Ion Beam Therapy Center.

    PubMed

    Winkelmann, T; Cee, R; Haberer, T; Naas, B; Peters, A; Scheloske, S; Spädtke, P; Tinschert, K

    2008-02-01

    Radiotherapy with heavy ions is an upcoming cancer treatment method with to date unparalleled precision. It associates higher control rates particularly for radiation resistant tumor species with reduced adverse effects compared to conventional photon therapy. The accelerator beam lines and structures of the Heidelberg Ion Beam Therapy Center (HIT) have been designed under the leadership of GSI, Darmstadt with contributions of the IAP Frankfurt. Currently, the accelerator is under commissioning, while the injector linac has been completed. When the patient treatment begins in 2008, HIT will be the first medical heavy ion accelerator in Europe. This presentation will provide an overview about the project, with special attention given to the 14.5 GHz electron cyclotron resonance (ECR) ion sources in operation with carbon, hydrogen, helium, and oxygen, and the experience of one year of continuous operation. It also displays examples for beam emittances, measured in the low energy beam transport. In addition to the outlook of further developments at the ECR ion sources for a continuously stable operation, this paper focuses on some of the technical processings of the past year. PMID:18315121

  20. Pulsed neutrons: One year of experience with the new source at Argonne National Laboratory

    NASA Astrophysics Data System (ADS)

    Lander, G. H.

    1983-05-01

    The Intense Pulsed Neutron Source (IPNS) at Argonne National Laboratory is a spallation neutron source based on a 500 MeV proton accelerator operating at 30 Hz and with an average proton current of ≈ 10 μA. Neutron scattering instruments for elastic scattering include two powder diffractometers, a single-crystal diffractometer based on the Laue method and employing a large (30 x 30 cm) position-sensitive scintillation detector, a small-angle diffractometer using a position-sensitive detector, and a polarized-neutron diffractometer which will utilize the spin-refrigerator device to obtain a beam of white polarized neutrons. For inelastic scattering we presently have the crystal-analyzer spectrometer, and two chopper spectrometers capable of providing monoenergetic incident neutron beams of between 100 and 600 meV. From its inception IPNS has been operating in a user mode and the selection of experiments is made by a Program Committee twice a year on the basis of the scientifi cmerit of submitted proposals.

  1. Initial operation of a large-scale Plasma Source Ion Implantation experiment

    SciTech Connect

    Wood, B.P.; Henins, I.; Gribble, R.J.; Reass, W.A.; Faehl, R.J.; Nastasi, M.A.; Rej, D.J.

    1993-10-01

    In Plasma Source Ion Implantation (PSII), a workpiece to be implanted is immersed in a weakly ionized plasma and pulsed to a high negative voltage. Plasma ions are accelerated toward the workpiece and implanted in its surface. Experimental PSII results reported in the literature have been for small workpieces. A large scale PSII experiment has recently been assembled at Los Alamos, in which stainless steel and aluminum workpieces with surface areas over 4 m{sup 2} have been implanted in a 1.5 m-diameter, 4.6 m-length cylindrical vacuum chamber. Initial implants have been performed at 50 kV with 20 {mu}s pulses of 53 A peak current, repeated at 500 Hz, although the pulse modulator will eventually supply 120 kV pulses of 60 A peak current at 2 kHz. A 1,000 W, 13.56 MHz capacitively-coupled source produces nitrogen plasma densities in the 10{sup 15} m{sup {minus}3} range at neutral pressures as low as 0.02 mtorr. A variety of antenna configurations have been tried, with and without axial magnetic fields of up to 60 gauss. Measurements of sheath expansion, modulator voltage and current, and plasma density fill-in following a pulse are presented. The authors consider secondary electron emission, x-ray production, workpiece arcing, implant conformality, and workpiece and chamber heating.

  2. Study of the Helicon Source Operation in the Variable Specific Impulse Magnetoplasma Rocket (VASIMR) Experiment

    NASA Technical Reports Server (NTRS)

    Molvig, Kim; Batishchev, Oleg

    2003-01-01

    During this research period the following models of the VASIMR helicon discharge have been further developed and applied to analyze the on-going VX- 10 ASPL experiment: A) 1D semi-analytical model for a mixed-collisional propellant flow B) OD power and balance model for the whole helicon discharge In this particular research period we have concentrated on the MW-level performance of the VASIMR helicon source. Favorable high-power scaling and reduced ionization costs were obtained, and presented at the VASIMR NASA review in the Fall '02. This Grant is continuation of the previous NAG9-1224 award. The research results are summarized in 14 publications; they were presented as 20+ talks at the major International Conferences and scientific seminars at the leading Academic and Research Institutions. The reported results allowed helicon discharge characterization, understanding of the several experimental observations, and helped to make predictions and propose structural modifications for the advanced VASIMR helicon source operation.

  3. Advanced light source vacuum policy and vacuum guidelines for beamlines and experiment endstations

    SciTech Connect

    Hussain, Z.

    1995-08-01

    The purpose of this document is to: (1) Explain the ALS vacuum policy and specifications for beamlines and experiment endstations. (2) Provide guidelines related to ALS vacuum policy to assist in designing beamlines which are in accordance with ALS vacuum policy. This document supersedes LSBL-116. The Advanced Light Source is a third generation synchrotron radiation source whose beam lifetime depends on the quality of the vacuum in the storage ring and the connecting beamlines. The storage ring and most of the beamlines share a common vacuum and are operated under ultra-high-vacuum (UHV) conditions. All endstations and beamline equipment must be operated so as to avoid contamination of beamline components, and must include proper safeguards to protect the storage ring vacuum from an accidental break in the beamline or endstation vacuum systems. The primary gas load during operation is due to thermal desorption and electron/photon induced desorption of contaminants from the interior of the vacuum vessel and its components. The desorption rates are considerably higher for hydrocarbon contamination, thus considerable emphasis is placed on eliminating these sources of contaminants. All vacuum components in a beamline and endstation must meet the ALS vacuum specifications. The vacuum design of both beamlines and endstations must be approved by the ALS Beamline Review Committee (BRC) before vacuum connections to the storage ring are made. The vacuum design is first checked during the Beamline Design Review (BDR) held before construction of the beamline equipment begins. Any deviation from the ALS vacuum specifications must be approved by the BRC prior to installation of the equipment on the ALS floor. Any modification that is incorporated into a vacuum assembly without the written approval of the BRC is done at the user`s risk and may lead to rejection of the whole assembly.

  4. Quantifying the impact of various radioactive background sources on germanium-76 zero-neutrino-double-beta-decay experiments

    NASA Astrophysics Data System (ADS)

    Mizouni, Katarina Leila

    The goal of searching for 0nubetabeta-decay is to probe an absolute neutrino mass scale suggested by the mass-splitting parameters observed by neutrino oscillation experiments. Furthermore, observation of 0nubetabeta-decay is an explicit instance of lepton-number non-conservation. To detect the rare events such as 0nubetabeta-decay, half-lives of the order of 10 25-1027 years have to be probed. Using an active detector with a large volume, such as hundreds of kilograms of HPGe in the case of MAJORANA, and taking efficient measures to mitigate background of cosmic and primordial origins are necessary for the success of a sensitive 0nubetabeta-decay experiment. One focus of the present research is the analysis of data from Cascades, a HPGe crystal array developed at Pacific Northwest National Laboratory in Richland, WA, to determine an upper bound on primordial radiation levels in the cryostat constructed with electroformed copper similar to that electroformed for MAJORANA. It will be shown, however, that there are sources of background much more serious than cryostats in 76Ge experiments. Additionally, experimental applications of the Cascades detector were studied by predicting the sensitivity for a 0nuBB-decay experiment using GEANT4 simulations. Tellurium-130, an even-even nucleus that can undergo 0nubetabeta-decay to either the ground state or first 01+ excited state of 130Xe, was used as an example. The present work developed techniques that will be used for a number of measurements of betabeta-decay half-lives for decays to excited states of the daughter isotopes.

  5. Numerical investigation of the seismo-acoustic responses of the Source Physics Experiment underground explosions

    NASA Astrophysics Data System (ADS)

    Antoun, T.; Ezzedine, S. M.; Vorobiev, O.; Glenn, L. A.

    2015-12-01

    We have performed three-dimensional high resolution simulations of underground explosions conducted recently in jointed rock outcrop as part of the Source Physics Experiment (SPE) being conducted at the Nevada National Security Site (NNSS). The main goal of the current study is to investigate the effects of the structural and geomechanical properties on the spall phenomena due to underground explosions and its subsequent effect on the seismo-acoustic signature at far distances. Two parametric studies have been undertaken to assess the impact of different 1) conceptual geological models including a single layer and two layers model, with and without joints and with and without varying geomechanical properties, and 2) depth of bursts of the explosions and explosion yields. Through these investigations we have explored not only the near-field response of the explosions but also the far-field responses of the seismic and the acoustic signatures. The near-field simulations were conducted using the Eulerian and Lagrangian codes, GEODYN and GEODYN -L, respectively, while the far-field seismic simulations were conducted using the elastic wave propagation code, WPP, and the acoustic response using the Kirchhoff-Helmholtz-Rayleigh time-dependent approximation code, KHR. Though a series of simulations, we have recorded the velocity field histories a) at the ground surface on an acoustic-source-patch for the acoustic simulations, and 2) on a seismic-source-box for the seismic simulations. We first analyzed the SPE3 and SPE4-prime experimental data and simulated results, and then simulated SPE5, SPE6/7 to anticipate their seismo-acoustic responses given conditions of uncertainties. SPE experiments were conducted in a granitic formation; we have extended the parametric study to include other geological settings such dolomite and alluvial formations. These parametric studies enabled us 1) investigating the geotechnical and geophysical key parameters that impact the seismo

  6. Column Experiments of Smouldering Combustion as a Remediation Technology for NAPL Source Zones

    NASA Astrophysics Data System (ADS)

    Pironi, P.; Switzer, C.; Rein, G.; Torero, J. L.; Gerhard, J. I.

    2008-12-01

    Smouldering combustion is an innovative approach that has significant potential for the remediation of industrial sites contaminated by non-aqueous phase liquids (NAPLs). Many common liquid contaminants, including coal tar, solvents, oils and petrochemicals are combustible and release significant amounts of heat when burned. Smouldering combustion is the flameless burning of a condensed fuel that derives heat from surface oxidation reactions. Gerhard et al., 2006 (Eos Trans., 87(52), Fall Meeting Suppl. H24A) presented proof-of-concept experiments demonstrating that NAPLs embedded in a porous medium may be effectively destroyed via smouldering. Based upon that work, it was hypothesized that the process can be self- sustaining, such that, a short duration energy input (i.e., ignition) at a single location is sufficient to generate a reaction that propagates itself through the NAPL source zone until the NAPL is eliminated, provided that enough air is injected into the soil. In this work, this hypothesis is proven via column experiments at the intermediate bench scale (~ 30 cm) utilizing coal tar-contaminated quartz sands. Over 30 such experiments examine the sensitivity of NAPL smouldering to a series of fluid-media system variables and engineering control parameters, including contaminant type, NAPL saturation, water saturation, porous media type and air injection rate. Diagnostic techniques employed to characterize the results include temperature mapping, off-gas analysis (via FTIR), heat front mapping via digital imaging, and pre- and post-treatment soil analysis. The derived relationships between the manipulated system variables and experimental results are providing understanding of the mechanisms controlling the ignition and propagation of liquid smouldering. Such insight is necessary for the ongoing design of both ex situ and in situ pilot applications.

  7. Site Characterization of the Source Physics Experiment Phase II Location Using Seismic Reflection Data

    NASA Astrophysics Data System (ADS)

    Sexton, E. A.; Snelson, C. M.; Chipman, V.; Emer, D. F.; White, R. L.; Emmitt, R.; Wright, A. A.; Drellack, S.; Huckins-Gang, H.; Mercadante, J.; Floyd, M.; McGowin, C.; Cothrun, C.; Bonal, N.

    2013-12-01

    An objective of the Source Physics Experiment (SPE) is to identify low-yield nuclear explosions from a regional distance. Low-yield nuclear explosions can often be difficult to discriminate among the clutter of natural and man-made explosive events (e.g., earthquakes and mine blasts). The SPE is broken into three phases. Phase I has provided the first of the physics-based data to test the empirical models that have been used to discriminate nuclear events. The Phase I series of tests were placed within a highly fractured granite body. The evolution of the project has led to development of Phase II, to be placed within the opposite end member of geology, an alluvium environment, thereby increasing the database of waveforms to build upon in the discrimination models. Both the granite and alluvium sites have hosted nearby nuclear tests, which provide comparisons for the chemical test data. Phase III of the SPE is yet to be determined. For Phase II of the experiment, characterization of the location is required to develop the geologic/geophysical models for the execution of the experiment. Criteria for the location are alluvium thickness of approximately 170 m and a water table below 170 m; minimal fracturing would be ideal. A P-wave mini-vibroseis survey was conducted at a potential site in alluvium to map out the subsurface geology. The seismic reflection profile consisted of 168 geophone stations, spaced 5 m apart. The mini-vibe was a 7,000-lb peak-force source, starting 57.5 m off the north end of the profile and ending 57.5 m past the southern-most geophone. The length of the profile was 835 m. The source points were placed every 5 m, equally spaced between geophones to reduce clipping. The vibroseis sweep was from 20 Hz down to 180 Hz over 8 seconds, and four sweeps were stacked at each shot location. The shot gathers show high signal-to-noise ratios with clear first arrivals across the entire spread and the suggestion of some shallow reflectors. The data were

  8. Compact laser sources for laser designation, ranging and active imaging

    NASA Astrophysics Data System (ADS)

    Goldberg, Lew; Nettleton, John; Schilling, Brad; Trussel, Ward; Hays, Alan

    2007-04-01

    Recent advances in compact solid sate lasers for laser designation, eye-safe range finding and active imaging are described. Wide temperature operation of a compact Nd:YAG laser was achieved by end pumping and the use of multi-λ diode stacks. Such lasers enabled construction of fully operational 4.7 lb laser designator prototypes generating over 50 mJ at 10-20 Hz PRF. Output pulse energy in excess of 100 mJ was demonstrated in a breadboard version of the end-pumped laser. Eye-safe 1.5 μm lasers based on flash-pumped, low PRF, Monoblock lasers have enabled compact STORM laser range finders that have recently been put into production. To achieve higher optical and electrical efficiency needed for higher PRF operation, Monoblock lasers were end-pumped by a laser diode stack. Laser diode end-pumped Monoblock lasers were operated at 10-20 Hz PRF over a wide temperature range (-20 to +50 °C). Compared with bulk compact solid state lasers, fiber lasers are characterized by lower pulse energy, higher PRF's, shorter pulses and higher electrical efficiency. An example of fiber lasers suitable for LIDAR, and atmospheric measurement applications is described. Eye-safe, low intensity diode pumped solid state green warning laser developed for US Army checkpoint and convoy applications is also described.

  9. The Source Physics Experiments and Advances in Seismic Explosion Monitoring Predictive Capabilities

    NASA Astrophysics Data System (ADS)

    Walter, W. R.; Ford, S. R.; Antoun, T.; Pitarka, A.; Xu, H.; Vorobiev, O.; Rodgers, A.; Pyle, M. L.

    2012-12-01

    Despite many years of study, a number of seismic explosion phenomena remain incompletely understood. These include the generation of S-waves, the variation of absolute amplitudes with emplacement media differences, and the occasional generation of reversed Rayleigh waves. Advances in numerical methods and increased computational power have improved the physics contained in the modeling software and it is possible to couple non-linear source-region effects to far-field propagation codes to predict seismic observables, thereby allowing end-to-end modeling. However, despite the many sensor records from prior nuclear tests, the data available to develop and validate the simulation codes remain limited in important ways. This is particularly the case for the range of both scaled depths of burial and of source media, especially where full near-field to far-field records are available along with key quantitative parameter data such as depth, material properties and yield. For example, two of the most widely used seismic source models, both derived from the best empirical data, Mueller and Murphy (1971) and Denny and Johnson (1989), predict very different amplitudes for greatly overburied explosions. To provide new data to advance predictive explosion modeling capabilities, the National Nuclear Security Administration (NNSA) is carrying out a series of seven chemical explosions over a range of depths and sizes in the Source Physics Experiments (SPE). These shots are taking place in the Climax Stock granite at the Nevada National Security Site, the location where reversed Rayleigh waves from a nuclear test were first observed in the 1962 HARDHAT event (e.g. Brune and Pomeroy, 1963). Three of the SPE shots have successfully occurred so far, and were well-recorded by an extensive set of instrumentation including seismic, acoustic, EM, and remote sensing. In parallel, detailed site characterization has been conducted using geologic mapping and sampling, borehole geophysics

  10. Active Reading Experience Questionnaire: Development and Validation of an Instrument for Studying Active Reading Activities

    ERIC Educational Resources Information Center

    Palilonis, Jennifer; Butler, Darrell

    2015-01-01

    The increasing adoption of mobile platforms and digital textbooks in university classrooms continues to have a profound impact on higher education. Advocates believe that providing students digital textbooks with built-in annotation features and interactive study tools will improve learning by facilitating active reading, a task essential to…

  11. A modified method for the characterisation and activity determination of large area sources.

    PubMed

    Svec, A; Janssen, H; Pernická, L; Klein, R

    2006-01-01

    Large area sources emitting alpha and beta radiations, respectively, are often used for calibrations of surface contamination monitors and meters. It is well known, however, that their properties are strongly influenced by their construction and by their active layer preparation. Non-uniformity of activity distributions over the active surface and the thickness of absorption and backscattering layers cause changes not only in the ratio of particle emission rate and activity but also in emitted particle spectra distributions. Consequently, different sources need to be characterised by one or more parameters related to their emitted particle spectra and used for their activity determination. A modified method based on simple particle absorption spectrometry has been developed. The correlation between a source characteristic parameter and its radiation detection efficiency is utilised for its activity estimation. PMID:16549354

  12. Intracavitary dosimetry of a high-activity remote loading device with oscillating source.

    PubMed

    Arcovito, G; Piermattei, A; D'Abramo, G; Bassi, F A

    1984-12-01

    Dosimetric experiments have been carried out in order to obtain the dose distribution in water around a Fletcher applicator loaded by a Buchler system containing two 137Cs 148 GBq (4 Ci) sources and one 192Ir 740 GBq (20 Ci) source. The mechanical system which controls the movement of the 192Ir source and the resulting motion of the source are described. The dose distribution around the sources was measured photographically and by a PWT Normal 0.22 cm3 ionisation chamber. The absolute dose rate was measured along the lateral axes of the sources. The measurements of exposure in water near the sources were corrected for the effect due to the finite volume of the chamber. The "quantisation method" described by Cassell (1983) was utilised to calculate the variation of the dose rate along the lateral axes of the sources. The dose distribution around both 192Ir and 137Cs sources was found to be spherical for angles greater than 40 degrees from the longitudinal axes of the sources. A simple algorithm fitting the data for the moving 192Ir source is proposed. A program written in FORTRAN IV and run on a Univac 1100/80 computer has been used to plot dose distributions on anatomical data obtained from CT images. The uncertainties of the measurements and calculations have been examined and the greatest error has been found to be 5.5%. The clinical significance of the treatment method is discussed. PMID:6509290

  13. Preseismic velocity changes observed from active source monitoring at the Parkfield SAFOD drill site.

    PubMed

    Niu, Fenglin; Silver, Paul G; Daley, Thomas M; Cheng, Xin; Majer, Ernest L

    2008-07-10

    Measuring stress changes within seismically active fault zones has been a long-sought goal of seismology. One approach is to exploit the stress dependence of seismic wave velocity, and we have investigated this in an active source cross-well experiment at the San Andreas Fault Observatory at Depth (SAFOD) drill site. Here we show that stress changes are indeed measurable using this technique. Over a two-month period, we observed an excellent anti-correlation between changes in the time required for a shear wave to travel through the rock along a fixed pathway (a few microseconds) and variations in barometric pressure. We also observed two large excursions in the travel-time data that are coincident with two earthquakes that are among those predicted to produce the largest coseismic stress changes at SAFOD. The two excursions started approximately 10 and 2 hours before the events, respectively, suggesting that they may be related to pre-rupture stress induced changes in crack properties, as observed in early laboratory studies. PMID:18615082

  14. Active Seismic Monitoring Using High-Power Moveable 40-TONS Vibration Sources in Altay-Sayn Region of Russia

    NASA Astrophysics Data System (ADS)

    Soloviev, V. M.; Seleznev, V. S.; Emanov, A. F.; Kashun, V. N.; Elagin, S. A.; Romanenko, I.; Shenmayer, A. E.; Serezhnikov, N.

    2013-05-01

    determined variations in velocities of longitudinal and transverse waves. Both from 100-tons and 40-tons vibration sources there are distinctly determined annual and semiannual variations, and also variations of 120 and 90 days. There is determined correlations of revealed variations of P- and S-wave velocities with drowning of the upper part of the Earth`s crust because of season changes of water volumes in the biggest Novosibirsk water reservoir. There were carried out experiments on aperture widening of operating vibroseismic observations in seismic active zones of the South of Altay. All these results prove possibility of using moveable collapsible 40-tons vibration sources for active monitoring of seismic dangerous zones, nuclear power plants, nuclear waste storage etc.

  15. VOC Source and Inflow Characterization during the Deep Convective Cloud and Chemistry (DC3) experiment

    NASA Astrophysics Data System (ADS)

    Blake, N. J.; Hartt, G.; Barletta, B.; Simpson, I. J.; Schroeder, J.; Hung, Y.; Marrero, J.; Gartner, A.; Hirsch, C.; Meinardi, S.; Blake, D. R.; Zhang, Y.; Apel, E. C.; Hornbrook, R. S.; Campos, T. L.; Emmons, L. K.

    2013-12-01

    More than 50 volatile organic compounds (VOCs) were measured during the Deep Convective Clouds and Chemistry Project (DC3) field campaign, which was based out of Salina, KS May 10 - June 30, 2012. DC3 investigated the impact of deep, mid-latitude continental convective clouds on upper tropospheric composition and chemistry. The UCI Whole Air Sampler (WAS) measured VOCs on board the NASA DC-8 aircraft and the NCAR Trace Organic Gas Analyzer (TOGA) measured VOCs on board the NSF GV. Coordinated flights between the two aircraft produced a rich dataset with which to characterize the inflow and outflow of convective events. While probing storm inflow, numerous natural and anthropogenic sources were encountered, including oil and gas wells in Colorado, Texas, and Oklahoma, biomass burning, biogenic VOC emissions, and other anthropogenic sources (urban, feedlots, etc). The significant and widespread influence of oil and gas activities dominated VOC alkane distributions during DC3, in both inflow and outflow, effectively illustrating the connection between emission and fast vertical transport of VOCs into the free troposphere. We present a mass balance analysis of a flight over TX and OK, which allowed us to estimate oil and gas emissions in that region. The results from this analysis will be compared to previous work in the same area, as well as to emissions from other oil and gas regions and to model simulations from the Community Atmosphere Model with Chemistry (CAM-chem).

  16. Natural product source material use in the pharmaceutical industry: the Glaxo experience.

    PubMed

    Turner, D M

    1996-04-01

    Glaxo PLC has had a significant involvement with Natural Product Source Materials for all of its commercial history and, most recently, has pursued this interest by use of such materials as templates for new lead discovery. Through the expertise and facilities in its Natural Products Discovery Department, Glaxo extracts relatively small quantities of plant material (typically 200-250 g dry weight) and cultures microorganisms from environmental samples (typically 10-50 g). Extracts and fermentation broths are screened in order to detect bioactive principles (BPs). If the potency, selectivity and specificity of the BP is acceptable, isolation, purification and structural elucidation follows. It is most unlikely, in our experience, that the BP itself will become a drug; it is much more likely that we shall need to initiate a medicinal chemistry synthesis program in order to try to produce a molecule that has both the essential biological and desirable chemical properties to become a drug development candidate. This synthetic process is often a long one and our confidence that such a process is worth undertaking is greatly improved if the BP is novel. An essential component of any medicinal chemistry strategy is that it allows us to obtain secure intellectual property rights through patents. Acquisition of product claim protection, the strongest form of patent protection, is of great importance. Safety testing and clinical development of the candidate drug can take 7-10 years, and often more, during which patent protection is constantly eroding. Recognizing that acquisition of Natural Products Source Materials is an issue of growing concern, Glaxo Research and Development Ltd. (GRD), in the early part of 1992, implemented a policy for plant supply. This policy was subsequently modified to embrace source materials such as environmental, soil and marine samples from which fungi, micro- and microorganisms may be obtained. As a direct consequence of this policy, Natural

  17. Edge effect modeling and experiments on active lap processing.

    PubMed

    Liu, Haitao; Wu, Fan; Zeng, Zhige; Fan, Bin; Wan, Yongjian

    2014-05-01

    Edge effect is regarded as one of the most difficult technical issues for fabricating large primary mirrors, especially for large polishing tools. Computer controlled active lap (CCAL) uses a large size pad (e.g., 1/3 to 1/5 workpiece diameters) to grind and polish the primary mirror. Edge effect also exists in the CCAL process in our previous fabrication. In this paper the material removal rules when edge effects happen (i.e. edge tool influence functions (TIFs)) are obtained through experiments, which are carried out on a Φ1090-mm circular flat mirror with a 375-mm-diameter lap. Two methods are proposed to model the edge TIFs for CCAL. One is adopting the pressure distribution which is calculated based on the finite element analysis method. The other is building up a parametric equivalent pressure model to fit the removed material curve directly. Experimental results show that these two methods both effectively model the edge TIF of CCAL. PMID:24921777

  18. Generation of Acoustic-Gravity Waves in Ionospheric HF Heating Experiments: Simulating Large-Scale Natural Heat Sources

    NASA Astrophysics Data System (ADS)

    Pradipta, Rezy

    In this thesis, we investigate the potential role played by large-scale anomalous heat sources (e.g. prolonged heat wave events) in generating acoustic-gravity waves (AGWs) that might trigger widespread plasma turbulence in the ionospheric layer. The main hypothesis is that, the thermal gradients associated with the heat wave fronts could act as a source of powerful AGW capable of triggering ionospheric plasma turbulence over extensive areas. In our investigations, first we are going to examine a case study of the summer 2006 North American heat wave event. Our examination of GPS-derived total electron content (TEC) data over the North American sector reveals a quite noticeable increase in the level of daily plasma density fluctuations during the summer 2006 heat wave period. Comparison with the summer 2005 and summer 2007 data further confirms that the observed increase of traveling ionospheric disturbances (TIDs) during the summer 2006 heat wave period was not simply a regular seasonal phenomenon. Furthermore, a series of field experiments had been carried out at the High-frequency Active Auroral Research Program (HAARP) facility in order to physically simulate the process of AGW/TID generation by large-scale thermal gradients in the ionosphere. In these ionospheric HF heating experiments, we create some time-varying artificial thermal gradients at an altitude of 200--300 km above the Earth's surface using vertically-transmitted amplitude-modulated 0-mode HF heater waves. For our experiments, a number of radio diagnostic instruments had been utilized to detect the characteristic signatures of heater-generated AGW/TID. So far, we have been able to obtain several affirmative indications that some artificial AGW/TID are indeed being radiated out from the heated plasma volume during the HAARP-AGW experiments. Based on the experimental evidence, we may conclude that it is certainly quite plausible for large-scale thermal gradients associated with severe heat wave

  19. The fast neutron fluence and the activation detector activity calculations using the effective source method and the adjoint function

    SciTech Connect

    Hep, J.; Konecna, A.; Krysl, V.; Smutny, V.

    2011-07-01

    This paper describes the application of effective source in forward calculations and the adjoint method to the solution of fast neutron fluence and activation detector activities in the reactor pressure vessel (RPV) and RPV cavity of a VVER-440 reactor. Its objective is the demonstration of both methods on a practical task. The effective source method applies the Boltzmann transport operator to time integrated source data in order to obtain neutron fluence and detector activities. By weighting the source data by time dependent decay of the detector activity, the result of the calculation is the detector activity. Alternatively, if the weighting is uniform with respect to time, the result is the fluence. The approach works because of the inherent linearity of radiation transport in non-multiplying time-invariant media. Integrated in this way, the source data are referred to as the effective source. The effective source in the forward calculations method thereby enables the analyst to replace numerous intensive transport calculations with a single transport calculation in which the time dependence and magnitude of the source are correctly represented. In this work, the effective source method has been expanded slightly in the following way: neutron source data were performed with few group method calculation using the active core calculation code MOBY-DICK. The follow-up neutron transport calculation was performed using the neutron transport code TORT to perform multigroup calculations. For comparison, an alternative method of calculation has been used based upon adjoint functions of the Boltzmann transport equation. Calculation of the three-dimensional (3-D) adjoint function for each required computational outcome has been obtained using the deterministic code TORT and the cross section library BGL440. Adjoint functions appropriate to the required fast neutron flux density and neutron reaction rates have been calculated for several significant points within the RPV

  20. Eliciting Metacognitive Experiences and Reflection in a Year 11 Chemistry Classroom: An Activity Theory Perspective

    NASA Astrophysics Data System (ADS)

    Thomas, Gregory P.; McRobbie, Campbell J.

    2013-06-01

    Concerns regarding students' learning and reasoning in chemistry classrooms are well documented. Students' reasoning in chemistry should be characterized by conscious consideration of chemical phenomenon from laboratory work at macroscopic, molecular/sub-micro and symbolic levels. Further, students should develop metacognition in relation to such ways of reasoning about chemistry phenomena. Classroom change eliciting metacognitive experiences and metacognitive reflection is necessary to shift entrenched views of teaching and learning in students. In this study, Activity Theory is used as the framework for interpreting changes to the rules/customs and tools of the activity systems of two different classes of students taught by the same teacher, Frances, who was teaching chemical equilibrium to those classes in consecutive years. An interpretive methodology involving multiple data sources was employed. Frances explicitly changed her pedagogy in the second year to direct students attention to increasingly consider chemical phenomena at the molecular/sub-micro level. Additionally, she asked students not to use the textbook until toward the end of the equilibrium unit and sought to engage them in using their prior knowledge of chemistry to understand their observations from experiments. Frances' changed pedagogy elicited metacognitive experiences and reflection in students and challenged them to reconsider their metacognitive beliefs about learning chemistry and how it might be achieved. While teacher change is essential for science education reform, students are not passive players in change efforts and they need to be convinced of the viability of teacher pedagogical change in the context of their goals, intentions, and beliefs.

  1. Seismic exploration of Fuji volcano with active sources in 2003

    NASA Astrophysics Data System (ADS)

    Oikawa, J.; Kagiyama, T.; Tanaka, S.; Miyamachi, H.; Tsutsui, T.; Ikeda, Y.; Katayama, H.; Matsuo, N.; Oshima, H.; Nishimura, Y.; Yamamoto, K.; Watanabe, T.; Yamazaki, F.

    2004-12-01

    the Tanzawa Range to the east. This uplifted body is formed by plate subduction and collision with the Izu Peninsula, and is believed to have influence at significant depth. This is considered to be the reason for the change in the geologic structure beneath Fuji volcano from west to east. The dome structure of the bedrock layer (second layer) directly beneath the summit is considered to have formed in the initial period of volcanic activity that formed Mt. Fuji, leading to the subsequent formation of Komitake volcano, Ko-Fuji volcano and the present day Fuji volcano.

  2. Radon adsorbed in activated charcoal—a simple and safe radiation source for teaching practical radioactivity in schools and colleges

    NASA Astrophysics Data System (ADS)

    Al-Azmi, Darwish; Mustapha, Amidu O.; Karunakara, N.

    2012-07-01

    Simple procedures for teaching practical radioactivity are presented in a way that attracts students' attention and does not make them apprehensive about their safety. The radiation source is derived from the natural environment. It is based on the radioactivity of radon, a ubiquitous inert gas, and the adsorptive property of activated charcoal. Radon gas from ambient air in the laboratory was adsorbed into about 70 g of activated charcoal inside metallic canisters. Gamma radiation was subsequently emitted from the canisters, following the radioactive decay of radon and its progenies. The intensities of the emitted gamma-rays were measured at suitable intervals using a NaI gamma-ray detector. The counts obtained were analysed and used to demonstrate the radioactive decay law and determine the half-life of radon. In addition to learning the basic properties of radioactivity the students also get practical experience about the existence of natural sources of radiation in the environment.

  3. Source localization of ictal epileptic activity investigated by high resolution EEG and validated by SEEG.

    PubMed

    Koessler, Laurent; Benar, Christian; Maillard, Louis; Badier, Jean-Michel; Vignal, Jean Pierre; Bartolomei, Fabrice; Chauvel, Patrick; Gavaret, Martine

    2010-06-01

    High resolution electroencephalography (HR-EEG) combined with source localization methods has mainly been used to study interictal spikes and there have been few studies comparing source localization of scalp ictal patterns with depth EEG. To address this issue, 10 patients with four different scalp ictal patterns (ictal spikes, rhythmic activity, paroxysmal fast activity, obscured) were investigated by both HR-EEG and stereoelectroencephalography (SEEG). Sixty-four scalp-EEG sensors and a sampling rate of 1kHz were used to record scalp ictal patterns. Five different source models (moving dipole, rotating dipole, MUSIC, LORETA, and sLORETA) were used in order to perform source localization. Seven to 10 intracerebral electrodes were implanted during SEEG investigations. For each source model, the concordance between ictal source localization and epileptogenic zone defined by SEEG was assessed. Results were considered to agree if they localized in the same sublobar area as defined by a trained epileptologist. Across the study population, the best concordance between source localization methods and SEEG (9/10) was obtained with equivalent current dipole modeling. MUSIC and LORETA had a concordance of 7/10 whereas sLORETA had a concordance of only 5/10. Four of our patients classified into different groups (ictal spikes, paroxysmal fast activity, obscured) had complete concordance between source localization methods and SEEG. A high signal to noise ratio, a short time window of analysis (<1s) and bandpass filtering around the frequency of rhythmic activity allowed improvement of the source localization results. A high level of agreement between source localization methods and SEEG can be obtained for ictal spike patterns and for scalp-EEG paroxysmal fact activities whereas scalp rhythmic discharges can be accurately localized but originated from seizure propagation network. PMID:20206700

  4. Experimental evidence that microbial activity lowers the albedo of glacier surfaces: the cryoconite casserole experiment.

    NASA Astrophysics Data System (ADS)

    Musilova, M.; Tranter, M.; Takeuchi, N.; Anesio, A. M.

    2014-12-01

    Darkened glacier and ice sheet surfaces have lower albedos, absorb more solar radiation and consequently melt more rapidly. The increase in glacier surface darkening is an important positive feedback to warming global temperatures, leading to ever growing world-wide ice mass loss. Most studies focus primarily on glacial albedo darkening caused by the physical properties of snow and ice surfaces, and the deposition of dark impurities on glaciers. To date, however, the important effects of biological activity have not been included in most albedo reduction models. This study provides the first experimental evidence that microbial activity can significantly decrease the albedo of glacier surfaces. An original laboratory experiment, the cryoconite casserole, was designed to test the microbial darkening of glacier surface debris (cryoconite) under simulated Greenlandic summer conditions. It was found that minor fertilisation of the cryoconite (at nutrient concentrations typical of glacial ice melt) stimulated extensive microbial activity. Microbes intensified their organic carbon fixation and even mined phosphorous out of the glacier surface sediment. Furthermore, the microbial organic carbon production, accumulation and transformation caused the glacial debris to darken further by 17.3% reflectivity (albedo analogue). These experiments are consistent with the hypothesis that enhanced fertilisation by anthropogenic inputs results in substantial amounts of organic carbon fixation, debris darkening and ultimately to a considerable decrease in the ice albedo of glacier surfaces on global scales. The sizeable amounts of microbially produced glacier surface organic matter and nutrients can thus be a vital source of bioavailable nutrients for subglacial and downstream environments.

  5. Rock Valley Source Physics Experiment Preparation: Earthquake Relocation and Attenuation Structure Characterization

    NASA Astrophysics Data System (ADS)

    Pyle, M. L.; Walter, W. R.; Myers, S.; Pasyanos, M. E.; Smith, K. D.

    2012-12-01

    The science of nuclear test monitoring relies on seismic methods to distinguish explosion from earthquakes sources. Unfortunately, the physics behind how an explosion generates seismic waves, particularly shear waves, remains incompletely understood. The Source Physics Experiments (SPE) are an ongoing series of chemical explosions designed to address this problem and advance explosion monitoring physics and associated simulation codes. The current series of explosions are located in the Climax Stock granite on the Nevada National Security Site (NNSS). A future candidate for the SPEs would allow us to make a direct comparison of earthquake and explosion sources by detonating an explosion at a well constrained earthquake hypocenter and recording the resulting signals from each source at common receivers. This possibility arises from an area of unusually shallow seismicity in the Rock Valley area of the southern NNSS. While most tectonic earthquakes occur at depths greater than 5 km, a sequence of unusually shallow earthquakes with depths of 1-2 km occurred in Rock Valley in May of 1993. The main shock had a magnitude of approximately 3.7 and 11 more events in the sequence had magnitudes over 2. The shallow depths of these events were well constrained by temporary stations deployed at the time by the University of Nevada-Reno (UNR). As part of a feasibility study for a future Rock Valley SPE, LLNL, UNR and NSTec are working to re-instrument and improve our understanding of the Rock Valley region. Rock Valley is a complex set of left oblique-slip segmented fault blocks; it is a regular source region for small magnitude shallow earthquakes. A dense seismic network was operated in the southern NNSS through the Yucca Mountain project (1992-2010). Although much of the older network has been removed, six new Rock Valley telemetered seismic stations located at both original 1993 sites and additional sites, have been installed and operating since early 2011. In order to

  6. Effect of Anisotropic Velocity Structure on Acoustic Emission Source Location during True-Triaxial Deformation Experiments

    NASA Astrophysics Data System (ADS)

    Ghofrani Tabari, Mehdi; Goodfellow, Sebastian; Young, R. Paul

    2016-04-01

    Although true-triaxial testing (TTT) of rocks is now more extensive worldwide, stress-induced heterogeneity due to the existence of several loading boundary effects is not usually accounted for and simplified anisotropic models are used. This study focuses on the enhanced anisotropic velocity structure to improve acoustic emission (AE) analysis for an enhanced interpretation of induced fracturing. Data from a TTT on a cubic sample of Fontainebleau sandstone is used in this study to evaluate the methodology. At different stages of the experiment the True-Triaxial Geophysical Imaging Cell (TTGIC), armed with an ultrasonic and AE monitoring system, performed several velocity surveys to image velocity structure of the sample. Going beyond a hydrostatic stress state (poro-elastic phase), the rock sample went through a non-dilatational elastic phase, a dilatational non-damaging elasto-plastic phase containing initial AE activity and finally a dilatational and damaging elasto-plastic phase up to the failure point. The experiment was divided into these phases based on the information obtained from strain, velocity and AE streaming data. Analysis of the ultrasonic velocity survey data discovered that a homogeneous anisotropic core in the center of the sample is formed with ellipsoidal symmetry under the standard polyaxial setup. Location of the transducer shots were improved by implementation of different velocity models for the sample starting from isotropic and homogeneous models going toward anisotropic and heterogeneous models. The transducer shot locations showed a major improvement after the velocity model corrections had been applied especially at the final phase of the experiment. This location improvement validated our velocity model at the final phase of the experiment consisting lower-velocity zones bearing partially saturated fractures. The ellipsoidal anisotropic velocity model was also verified at the core of the cubic rock specimen by AE event location of

  7. HerMES: disentangling active galactic nuclei and star formation in the radio source population

    NASA Astrophysics Data System (ADS)

    Rawlings, J. I.; Page, M. J.; Symeonidis, M.; Bock, J.; Cooray, A.; Farrah, D.; Guo, K.; Hatziminaoglou, E.; Ibar, E.; Oliver, S. J.; Roseboom, I. G.; Scott, Douglas; Seymour, N.; Vaccari, M.; Wardlow, J. L.

    2015-10-01

    We separate the extragalactic radio source population above ˜50 μJy into active galactic nuclei (AGN) and star-forming sources. The primary method of our approach is to fit the infrared spectral energy distributions (SEDs), constructed using Spitzer/IRAC (Infrared Array Camera) and Multiband Imaging Photometer for Spitzer (MIPS) and Herschel/SPIRE photometry, of 380 radio sources in the Extended Chandra Deep Field-South. From the fitted SEDs, we determine the relative AGN and star-forming contributions to their infrared emission. With the inclusion of other AGN diagnostics such as X-ray luminosity, Spitzer/IRAC colours, radio spectral index and the ratio of star-forming total infrared flux to k-corrected 1.4 GHz flux density, qIR, we determine whether the radio emission in these sources is powered by star formation or by an AGN. The majority of these radio sources (60 per cent) show the signature of an AGN at some wavelength. Of the sources with AGN signatures, 58 per cent are hybrid systems for which the radio emission is being powered by star formation. This implies that radio sources which have likely been selected on their star formation have a high AGN fraction. Below a 1.4 GHz flux density of 1 mJy, along with finding a strong contribution to the source counts from pure star-forming sources, we find that hybrid sources constitute 20-65 per cent of the sources. This result suggests that hybrid sources have a significant contribution, along with sources that do not host a detectable AGN, to the observed flattening of the source counts at ˜1 mJy for the extragalactic radio source population.

  8. Dipole source localization of interictal epileptiform activity in temporal lobe epilepsy with medial temporal lesion.

    PubMed

    Mine, S; Iwasa, H; Nakajima, Y; Yamaura, A

    2000-02-01

    Dipole sources of interictal epileptiform activities recorded by conventional electroencephalogram (EEG) were estimated using the dipole tracing method. Four cases of temporal lobe epilepsy with medial temporal lesions were studied. Two patients with hippocampal sclerosis, one patient with granulation in the hippocampus and one patient with cavernous angioma were involved in the study. Interictal epileptiform activities were classified into two patterns according to the topography of spikes. They were widespread spikes over the parasagittal electrodes (parasagittal spikes) and restricted spikes at the temporal electrodes (temporal spikes). Dipole sources of parasagittal spikes were localized in the medio-basal temporal lobe with vertically orientated vector moment. Dipole sources of temporal spikes were localized in the medio-basal temporal lobe with horizontally orientated vector moment. Locations of dipoles and directions of vector moments were consistent with topography and polarity of spikes. The difference in the two patterns of interictal epileptiform activities was derived from the difference in the direction of the vector moment of dipole sources. There was no difference in the location of dipole sources. Both the dipole sources and the lesions were localized in the same medio-basal temporal lobe. Dipole tracing was very useful in localizing the dipole sources of interictal epileptiform activities and in understanding the neurophysiological background. PMID:15558875

  9. Active sand dunes are largest dust source in the Sahara Desert

    NASA Astrophysics Data System (ADS)

    Bhattacharya, Atreyee

    2012-09-01

    Dried up lakebeds and playas in the Sahara Desert of North Africa are large sources of dust in the atmosphere. The Bodélé Depression at the southern edge of the Sahara Desert, for example, is the single largest source of dust in the world; on average, 100 dust storms a year originate from the Bodélé Depression. A new study by Crouvi et al., however, finds that active sand dunes could be even bigger sources of desert dust in the atmosphere. Atmospheric dust plays active roles in climate and biological processes in the ocean: It regulates heating at the surface of the Earth; modifies cloud properties that affect rainfall; and acts as the only source of iron, a critical nutrient for microorganisms in the ocean. Little is known about types of dust sources in the Sahara Desert, which alone accounts for more than 50% of the dust in the atmosphere.

  10. Agent-based power sharing scheme for active hybrid power sources

    NASA Astrophysics Data System (ADS)

    Jiang, Zhenhua

    The active hybridization technique provides an effective approach to combining the best properties of a heterogeneous set of power sources to achieve higher energy density, power density and fuel efficiency. Active hybrid power sources can be used to power hybrid electric vehicles with selected combinations of internal combustion engines, fuel cells, batteries, and/or supercapacitors. They can be deployed in all-electric ships to build a distributed electric power system. They can also be used in a bulk power system to construct an autonomous distributed energy system. An important aspect in designing an active hybrid power source is to find a suitable control strategy that can manage the active power sharing and take advantage of the inherent scalability and robustness benefits of the hybrid system. This paper presents an agent-based power sharing scheme for active hybrid power sources. To demonstrate the effectiveness of the proposed agent-based power sharing scheme, simulation studies are performed for a hybrid power source that can be used in a solar car as the main propulsion power module. Simulation results clearly indicate that the agent-based control framework is effective to coordinate the various energy sources and manage the power/voltage profiles.

  11. EEG and MEG: sensitivity to epileptic spike activity as function of source orientation and depth.

    PubMed

    Hunold, A; Funke, M E; Eichardt, R; Stenroos, M; Haueisen, J

    2016-07-01

    Simultaneous electroencephalography (EEG) and magnetoencephalography (MEG) recordings of neuronal activity from epileptic patients reveal situations in which either EEG or MEG or both modalities show visible interictal spikes. While different signal-to-noise ratios (SNRs) of the spikes in EEG and MEG have been reported, a quantitative relation of spike source orientation and depth as well as the background brain activity to the SNR has not been established. We investigated this quantitative relationship for both dipole and patch sources in an anatomically realistic cortex model. Altogether, 5600 dipole and 3300 patch sources were distributed on the segmented cortical surfaces of two volunteers. The sources were classified according to their quantified depths and orientations, ranging from 20 mm to 60 mm below the skin surface and radial and tangential, respectively. The source time-courses mimicked an interictal spike, and the simulated background activity emulated resting activity. Simulations were conducted with individual three-compartment boundary element models. The SNR was evaluated for 128 EEG, 102 MEG magnetometer, and 204 MEG gradiometer channels. For superficial dipole and superficial patch sources, EEG showed higher SNRs for dominantly radial orientations, and MEG showed higher values for dominantly tangential orientations. Gradiometers provided higher SNR than magnetometers for superficial sources, particularly for those with dominantly tangential orientations. The orientation dependent difference in SNR in EEG and MEG gradually changed as the sources were located deeper, where the interictal spikes generated higher SNRs in EEG compared to those in MEG for all source orientations. With deep sources, the SNRs in gradiometers and magnetometers were of the same order. To better detect spikes, both EEG and MEG should be used. PMID:27328313

  12. Flame experiments at the advanced light source: new insights into soot formation processes.

    PubMed

    Hansen, Nils; Skeen, Scott A; Michelsen, Hope A; Wilson, Kevin R; Kohse-Höinghaus, Katharina

    2014-01-01

    The following experimental protocols and the accompanying video are concerned with the flame experiments that are performed at the Chemical Dynamics Beamline of the Advanced Light Source (ALS) of the Lawrence Berkeley National Laboratory(1-4). This video demonstrates how the complex chemical structures of laboratory-based model flames are analyzed using flame-sampling mass spectrometry with tunable synchrotron-generated vacuum-ultraviolet (VUV) radiation. This experimental approach combines isomer-resolving capabilities with high sensitivity and a large dynamic range(5,6). The first part of the video describes experiments involving burner-stabilized, reduced-pressure (20-80 mbar) laminar premixed flames. A small hydrocarbon fuel was used for the selected flame to demonstrate the general experimental approach. It is shown how species' profiles are acquired as a function of distance from the burner surface and how the tunability of the VUV photon energy is used advantageously to identify many combustion intermediates based on their ionization energies. For example, this technique has been used to study gas-phase aspects of the soot-formation processes, and the video shows how the resonance-stabilized radicals, such as C3H3, C3H5, and i-C4H5, are identified as important intermediates(7). The work has been focused on soot formation processes, and, from the chemical point of view, this process is very intriguing because chemical structures containing millions of carbon atoms are assembled from a fuel molecule possessing only a few carbon atoms in just milliseconds. The second part of the video highlights a new experiment, in which an opposed-flow diffusion flame and synchrotron-based aerosol mass spectrometry are used to study the chemical composition of the combustion-generated soot particles(4). The experimental results indicate that the widely accepted H-abstraction-C2H2-addition (HACA) mechanism is not the sole molecular growth process responsible for the formation

  13. Flame Experiments at the Advanced Light Source: New Insights into Soot Formation Processes

    PubMed Central

    Hansen, Nils; Skeen, Scott A.; Michelsen, Hope A.; Wilson, Kevin R.; Kohse-Höinghaus, Katharina

    2014-01-01

    The following experimental protocols and the accompanying video are concerned with the flame experiments that are performed at the Chemical Dynamics Beamline of the Advanced Light Source (ALS) of the Lawrence Berkeley National Laboratory1-4. This video demonstrates how the complex chemical structures of laboratory-based model flames are analyzed using flame-sampling mass spectrometry with tunable synchrotron-generated vacuum-ultraviolet (VUV) radiation. This experimental approach combines isomer-resolving capabilities with high sensitivity and a large dynamic range5,6. The first part of the video describes experiments involving burner-stabilized, reduced-pressure (20-80 mbar) laminar premixed flames. A small hydrocarbon fuel was used for the selected flame to demonstrate the general experimental approach. It is shown how species’ profiles are acquired as a function of distance from the burner surface and how the tunability of the VUV photon energy is used advantageously to identify many combustion intermediates based on their ionization energies. For example, this technique has been used to study gas-phase aspects of the soot-formation processes, and the video shows how the resonance-stabilized radicals, such as C3H3, C3H5, and i-C4H5, are identified as important intermediates7. The work has been focused on soot formation processes, and, from the chemical point of view, this process is very intriguing because chemical structures containing millions of carbon atoms are assembled from a fuel molecule possessing only a few carbon atoms in just milliseconds. The second part of the video highlights a new experiment, in which an opposed-flow diffusion flame and synchrotron-based aerosol mass spectrometry are used to study the chemical composition of the combustion-generated soot particles4. The experimental results indicate that the widely accepted H-abstraction-C2H2-addition (HACA) mechanism is not the sole molecular growth process responsible for the formation of the

  14. The MYTHEN detector for X-ray powder diffraction experiments at the Swiss Light Source

    PubMed Central

    Bergamaschi, Anna; Cervellino, Antonio; Dinapoli, Roberto; Gozzo, Fabia; Henrich, Beat; Johnson, Ian; Kraft, Philipp; Mozzanica, Aldo; Schmitt, Bernd; Shi, Xintian

    2010-01-01

    The MYTHEN single-photon-counting silicon microstrip detector has been developed at the Swiss Light Source for time-resolved powder diffraction experiments. An upgraded version of the detector has been installed at the SLS powder diffraction station allowing the acquisition of diffraction patterns over 120° in 2θ in fractions of seconds. Thanks to the outstanding performance of the detector and to the calibration procedures developed, the quality of the data obtained is now comparable with that of traditional high-resolution point detectors in terms of FWHM resolution and peak profile shape, with the additional advantage of fast and simultaneous acquisition of the full diffraction pattern. MYTHEN is therefore optimal for time-resolved or dose-critical measurements. The characteristics of the MYTHEN detector together with the calibration procedures implemented for the optimization of the data are described in detail. The refinements of two known standard powders are discussed together with a remarkable application of MYTHEN to organic compounds in relation to the problem of radiation damage. PMID:20724787

  15. Development of UCN rebuncher for nEDM experiments with pulsed sources

    NASA Astrophysics Data System (ADS)

    Imajo, Sohei; Iwashita, Yoshihisa; Kitaguchi, Masaaki; Shimizu, Hirohiko M.; Mishima, Kenji; Ino, Takashi; Kitahara, Ryuunosuke; Neutron Optics; Physics Collaboration

    2014-09-01

    We are planning to construct a spallation ultracold neutron (UCN) source and carry out the searches of the neutron electric dipole moment at J-PARC. It produces high-density pulsed UCNs. However, UCNs are diffused in guide tubes during long-range transport. In order to focus UCNs on the experimental bottle, we have developed a neutron accelerator named ``UCN rebuncher.'' This apparatus consists of a large electromagnet and a resonance spin flipper. The kinetic energy of neutron changes when it flies into static magnetic field and the change is retained due to spin-flip in the field. By accelerating slower neutrons or decelerating faster neutrons suitably this apparatus controls the diffusion of UCNs. We succeeded in the proof-of-principle experiment of the first rebuncher in 2011. It can change the kinetic energy in the range from 72 neV to 118 neV. At present we are developing the second rebuncher in order to increase the controllable range of kinetic energy by two times. It will be able to change the kinetic energy in the range from 33 neV to 124 neV.

  16. Bayesian approach for counting experiment statistics applied to a neutrino point source analysis

    NASA Astrophysics Data System (ADS)

    Bose, D.; Brayeur, L.; Casier, M.; de Vries, K. D.; Golup, G.; van Eijndhoven, N.

    2013-12-01

    In this paper we present a model independent analysis method following Bayesian statistics to analyse data from a generic counting experiment and apply it to the search for neutrinos from point sources. We discuss a test statistic defined following a Bayesian framework that will be used in the search for a signal. In case no signal is found, we derive an upper limit without the introduction of approximations. The Bayesian approach allows us to obtain the full probability density function for both the background and the signal rate. As such, we have direct access to any signal upper limit. The upper limit derivation directly compares with a frequentist approach and is robust in the case of low-counting observations. Furthermore, it allows also to account for previous upper limits obtained by other analyses via the concept of prior information without the need of the ad hoc application of trial factors. To investigate the validity of the presented Bayesian approach, we have applied this method to the public IceCube 40-string configuration data for 10 nearby blazars and we have obtained a flux upper limit, which is in agreement with the upper limits determined via a frequentist approach. Furthermore, the upper limit obtained compares well with the previously published result of IceCube, using the same data set.

  17. Undergraduate Laboratory Experiment Facilitating Active Learning of Concepts in Transport Phenomena: Experiment with a Subliming Solid

    ERIC Educational Resources Information Center

    Utgikar, Vivek P.

    2015-01-01

    An experiment based on the sublimation of a solid was introduced in the undergraduate Transport Phenomena course. The experiment required the students to devise their own apparatus and measurement techniques. The theoretical basis, assignment of the experiment, experimental results, and student/instructor observations are described in this paper.…

  18. An Overview of the Source Physics Experiments (SPE) at the Nevada National Security Site (NNSS)

    NASA Astrophysics Data System (ADS)

    Snelson, C. M.; Barker, D. L.; White, R. L.; Emmitt, R. F.; Townsend, M. J.; Graves, T. E.; Becker, S. A.; Teel, M. G.; Lee, P.; Antoun, T. H.; Rodgers, A.; Walter, W. R.; Mellors, R. J.; Brunish, W. M.; Bradley, C. R.; Patton, H. J.; Hawkins, W. L.; Corbell, B. H.; Abbott, R. E.; SPE Working Group

    2011-12-01

    Modeling of explosion phenomenology has been primarily empirically based when looking at the seismic, infrasound, and acoustic signals. In order to detect low-yield nuclear explosions under the Comprehensive Nuclear Test-Ban Treaty (CTBT), we must be able to understand and model the explosive source in settings beyond where we have empirical data. The Source Physics Experiments (SPE) at the Nevada National Security Site are the first step in this endeavor to link the empirically based with the physics-based modeling to develop this predictive capability. The current series of tests is being conducted in a granite body called the Climax Stock. This location was chosen for several reasons, including the site's expected "simple geology"-the granite is a fairly homogeneous body. In addition, data are available from underground nuclear tests that were conducted in the same rock body, and the nature of the geology has been well-documented. Among the project goals for the SPE is to provide fully coupled seismic energy to the seismic and acoustic seismic arrays so that the transition between the near and far-field data can be modeled and our scientists can begin to understand how non-linear effects and anisotropy control seismic energy transmission and partitioning. The first shot for the SPE was conducted in May 2011 as a calibration shot (SPE1) with 220 lb (100 kg) of chemical explosives set at a depth of 180 ft (55 m). An array of sensors and diagnostics recorded the shot data, including accelerometers, geophones, rotational sensors, short-period and broadband seismic sensors, Continuous Reflectometry for Radius vs. Time Experiment (CORRTEX), Time of Arrival (TOA), Velocity of Detonation (VOD) as well as infrasound sensors. The three-component accelerometer packages were set at depths of 180 ft (55 m), 150 ft (46 m), and 50 ft (15 m) in two rings around ground zero (GZ); the inner ring was at 10 m and the outer ring was 20 m from GZ. Six sets of surface accelerometers

  19. THE ENVIRONMENT AND DISTRIBUTION OF EMITTING ELECTRONS AS A FUNCTION OF SOURCE ACTIVITY IN MARKARIAN 421

    SciTech Connect

    Mankuzhiyil, Nijil; Ansoldi, Stefano; Tavecchio, Fabrizio

    2011-05-20

    For the high-frequency-peaked BL Lac object Mrk 421, we study the variation of the spectral energy distribution (SED) as a function of source activity, from quiescent to active. We use a fully automatized {chi}{sup 2}-minimization procedure, instead of the 'eyeball' procedure more commonly used in the literature, to model nine SED data sets with a one-zone synchrotron self-Compton (SSC) model and examine how the model parameters vary with source activity. The latter issue can finally be addressed now, because simultaneous broadband SEDs (spanning from optical to very high energy photon) have finally become available. Our results suggest that in Mrk 421 the magnetic field (B) decreases with source activity, whereas the electron spectrum's break energy ({gamma}{sub br}) and the Doppler factor ({delta}) increase-the other SSC parameters turn out to be uncorrelated with source activity. In the SSC framework, these results are interpreted in a picture where the synchrotron power and peak frequency remain constant with varying source activity, through a combination of decreasing magnetic field and increasing number density of {gamma} {<=} {gamma}{sub br} electrons: since this leads to an increased electron-photon scattering efficiency, the resulting Compton power increases, and so does the total (= synchrotron plus Compton) emission.

  20. Geologic Assessment of the Damage Zone from Two Explosions at the Source Physics Experiment

    NASA Astrophysics Data System (ADS)

    Townsend, M.; Prothro, L.; Huckins-Gang, H.; Obi, C.; Reed, D.; Snelson, C. M.

    2013-12-01

    Explosive tests are being conducted in fractured granite in Nevada to increase the understanding of certain basic physical phenomena associated with underground explosions. These tests, collectively known as the Source Physics Experiment (SPE), are designed to study the generation and propagation of seismic waves. The results will help advance the seismic monitoring capability of the United States by improving the predictive capability of physics-based modeling of explosive phenomena. Three of seven planned tests have been conducted to date. All the tests have been conducted in the same source hole. The first SPE shot (SPE-1) was a Green's function test conducted at the depth of 54.9 m, with an explosive yield of 88 kg (TNT equivalent). This study addresses the second and third shots (SPE 2 and SPE-3), which were conducted at the same depth, shallower than SPE-1 and with a larger explosive yield, to explore the influence of explosion-induced damage on seismic wave propagation. SPE-2 was conducted at the depth of 45.7 m in October 2011, with a yield of 997 kg, after which an angled core hole (U-15n#10) was drilled from the surface to the shot point to characterize the damage zone. After the source hole was cleaned out, SPE-3 was conducted at 45.8 m in July 2012, with a yield of 905 kg. Following SPE-3, a second angled core hole (U-15n#12) was drilled sub-parallel to U 15n#10 to provide a comparison of explosion-induced damage between the two shots. Geophysical logs were run in both holes, core samples were provided to Sandia National Laboratories for measurement of physical and mechanical properties, and down-hole videos were made in the source hole following both tests. The presence of natural faulting near the shot point complicates the comparison of the damage from the SPE-2 and SPE-3 shots, using only information from the two similarly positioned angled core holes. Characteristics of natural fractures allow them to be distinguished from shock-induced breaks

  1. Activation analysis of indium, KCl, and melamine by using a laser-induced neutron source

    NASA Astrophysics Data System (ADS)

    Lee, Sungman; Lee, Kitae; Cha, Hyungki

    2014-04-01

    A laser-induced repetitively operated fast neutron source with a neutron yield of 4 × 105 n/pulse and a pulse repetition rate of 5 Hz, which was developed using a deuterated polystyrene film target and a 24-TW femtosecond laser, was applied for laser activation analyses of indium, KCl, and melamine samples. The nuclear reactions of the measured gamma spectra for the activated samples were identified as (n, γ), (n, n'), and (n, 2n) reactions. These indicate possible usage of the neutron source for practical activation analyses of various materials.

  2. Source activity correlation effects on LCMV beamformers in a realistic measurement environment.

    PubMed

    Belardinelli, Paolo; Ortiz, Erick; Braun, Christoph

    2012-01-01

    In EEG and MEG studies on brain functional connectivity and source interactions can be performed at sensor or source level. Beamformers are well-established source-localization tools for MEG/EEG signals, being employed in source connectivity studies both in time and frequency domain. However, it has been demonstrated that beamformers suffer from a localization bias due to correlation between source time courses. This phenomenon has been ascertained by means of theoretical proofs and simulations. Nonetheless, the impact of correlated sources on localization outputs with real data has been disputed for a long time. In this paper, by means of a phantom, we address the correlation issue in a realistic MEG environment. Localization performances in the presence of simultaneously active sources are studied as a function of correlation degree and distance between sources. A linear constrained minimum variance (LCMV) beamformer is applied to the oscillating signals generated by the current dipoles within the phantom. Results show that high correlation affects mostly dipoles placed at small distances (1, 5 centimeters). In this case the sources merge. If the dipoles lie 3 centimeters apart, the beamformer localization detects attenuated power amplitudes and blurred sources as the correlation level raises. PMID:22611439

  3. Soaps and Suspicious Activity: Dramatic Experiences in British Classrooms.

    ERIC Educational Resources Information Center

    Ferree, Angela M.

    2001-01-01

    Offers examples of dramatic experiences (student produced soap operas) in two classrooms in British comprehensive secondary schools. Concludes that students in other countries would find such experiences as meaningful and enjoyable as their British counterparts. Notes that the two teachers managed to be flexible, appropriating effective…

  4. Development of a Measure to Assess Youth Self-Reported Experiences of Activity Settings (SEAS)

    ERIC Educational Resources Information Center

    King, Gillian; Batorowicz, Beata; Rigby, Patty; McMain-Klein, Margot; Thompson, Laura; Pinto, Madhu

    2014-01-01

    There is a need for psychometrically sound measures of youth experiences of community/home leisure activity settings. The 22-item Self-Reported Experiences of Activity Settings (SEAS) captures the following experiences of youth with a Grade 3 level of language comprehension or more: Personal Growth, Psychological Engagement, Social Belonging,…

  5. Implementing Open Source Platform for Education Quality Enhancement in Primary Education: Indonesia Experience

    ERIC Educational Resources Information Center

    Kisworo, Marsudi Wahyu

    2016-01-01

    Information and Communication Technology (ICT)-supported learning using free and open source platform draws little attention as open source initiatives were focused in secondary or tertiary educations. This study investigates possibilities of ICT-supported learning using open source platform for primary educations. The data of this study is taken…

  6. NSLS 2005 ACTIVITY REPORT (NATIONAL SYNCHROTRON LIGHT SOURCE ACTIVITY REPORT 2005).

    SciTech Connect

    MILLER, L.

    2006-05-01

    In 2005, the NSLS proved itself, once again, to be a center of scientific excellence. This remarkable facility, commissioned in the early 1980s, is still attracting some of the world's best researchers in almost every scientific field, who produce more than seven hundred scientific papers every year using the NSLS. The 'Science Highlights' and 'Feature Highlights' sections of this report are just a small sampling of the many, many impressive research projects conducted at the NSLS in 2005. For example, a user group synthesized and studied zinc-oxide nanowires, which have applications in many optical and electrical devices. Another user group studied how strontium and uranium are removed from high-level radioactive waste. And in another interesting study, users deciphered the basis for antibiotic resistance. However, as always, the success of these projects depends on the performance of the facility. Again this year, the rings were in top form--reliability was 96 percent for the x-ray ring and 99 percent for the VUV-IR ring. Additionally, to keep the NSLS as productive as possible and to continue to attract users, many beamline upgrade projects were completed this year. One of the highlights of these upgrades is the new mini-gap undulator installed at beamline X25. This insertion device is providing a much brighter x-ray source for the program at X25. In the always important area of safety, several noteworthy activities took place this year. In particular, NSLS staff made a major commitment to labeling and inspecting electrical equipment. And perhaps the best news is what didn't happen--there were no reportable occurrences related to environmental, safety, or health issues in 2005, and no injuries that resulted in restricted or lost time. We all owe thanks to the dedicated NSLS staff and users who have ensured that the NSLS remains a reliable, safe, up-to-date research facility. As 2005 came to an end, I stepped down as NSLS Chairman in order to focus my primary

  7. INTERLABORATORY COMPARISON OF MOTOR ACTIVITY EXPERIMENTS: IMPLICATIONS FOR NEUROTOXICOLOGICAL ASSESSMENTS

    EPA Science Inventory

    Motor activity is an important functional measure used in neurotoxicology the effects of chemicals on motor activity, however, may depend on variables such as, type of measurement apparatus, physical and environmental testing conditions, and many other experimental protocol and o...

  8. Are Roots the Source of All Soil Organic Matter? Results From Isotopic Experiments in Temperate Forests

    NASA Astrophysics Data System (ADS)

    Torn, M. S.

    2005-12-01

    Plants produce organic detritus through roots and aboveground senescence, mainly litterfall. In soil science and biogeochemistry, the main source of soil carbon (C) inputs has been assumed to be litter. For example, litterfall is used as a measure of primary productivity relevant to belowground processes and decomposition, and properties of litter decay have been used to parameterize soil C models. There is little empirical evidence, however, that aboveground C inputs make a quantitatively important contribution to mineral soil organic matter (SOM). In a series of experiments in Mediterranean conifer and eastern deciduous forests, we used 13-C and 14-C analysis to quantify the contribution of leaf /needle C versus root C into soil organic matter pools (separated by density, physical, and chemical fractionation). Because dissolved organic C (DOC) leaching into soil may be rapidly decomposed by microbes, we also examine incorporation of isotopic tracers into microbial biomass (using chloroform-fumigation extraction, 13-C PLFA, and handpicked ectomycorrhizal fungi). We have found that aboveground inputs make almost no contribution to soil organic matter or microbial biomass in the mineral soil of these forests, at least within five years of substrate deposition. A new model of the litter layer might have the litter layer accumulating and decaying in relative isolation from the mineral soil. In that case, DOC leaching from the litter layer may be providing energy but not biomass to microbes, be mineralized in abiotic reactions with soil minerals, or be moving rapidly in macro pores. We note that these sites have low earth worm populations; sites with more bioturbation might have more surface C input to SOM. We have found that fine root lifetimes are much longer than typical leaf or needle lifespan, such that the two sources must be treated differently in biogeochemical models. It also means that the stock of SOM in these forests is derived from a much smaller flux of C

  9. Magma Genesis in the Hawaiian Hot Spot: From melting experiments on basalt/peridotite hybrid source

    NASA Astrophysics Data System (ADS)

    Takahashi, E.

    2003-12-01

    Melting mantle peridotite is one of the central themes in experimental petrology. Melting studies in CMAS, NCMAS and natural peridotites have extensively documented the magma genesis process at Mid Oceanic Ridges (e.g., Presnall et al., 1979). Magma genesis in OIBs and LIPs, on the other hand, has been poorly constrained by experiments. Evidences from isotope geochemistry indicate that the source materials for basalt magmas in these provinces are not peridotite alone. Based on a geological and geochemical reconstruction of 3 Ma old Koolau volcano, I proposed that the size of eclogite blocks in the Hawaiian plume would exceed 1000km3 (Takahashi and Nakajima, 2002) and therefore the melting interaction of eclogite blocks and the surrounding peridotite would play essential roles in magma genesis in the Hawaiian hot spot. Melting experiments on basalt/peridotite composite starting materials were carried out at 2.5 to 3.0 GPa at temperatures from the peridotite dry solidus to that of basalt for 20 to 100 hours. Three layered starting materials consisting of 1 basalt to 2 peridotite (in volume) were placed in graphite/Pt double capsules. Peridotite KLB-1 (Fo89.6) and two basalt-starting materials (CLG-46 and CRB72-31) were used as starting materials. In temperatures ca.50-100 degrees below the peridotite solidus, silica-rich partial melts are produced in the basalt zone and the boundaries between the basalt and peridotite are coated with a 10 to 50 micron thick opx reaction band. The chemical reactions between the basalt and peridotite domains are controlled by solid diffusions across the opx reaction band and are very slow. In temperatures within 50 degrees of the peridotite dry solidus, a time dependent reaction process takes place. The basalt/peridotite boundary gradually partial melts as the chemical reaction lowers the peridotite solidus locally. At 2.8 GPa and 1450-1470C after 50-100 hours, resultant melt in the basalt layer becomes saturated with oliv + opx + cpx

  10. In and Out 101 Activities to Enrich the Learning Experience.

    ERIC Educational Resources Information Center

    Johnson, Patricia; And Others

    Activities developed and used with children and adults participating in the program offerings of the Edwin Gould Outdoor Education Centers are presented. Information describing most activities includes name, description of the activity, objectives, supervision or help required, procedures, time involved, size of area required, materials,…

  11. An Activity Group Experience for Disengaged Elderly Persons.

    ERIC Educational Resources Information Center

    Harris, John Ewing; Bodden, Jack L.

    1978-01-01

    Tested the activity theory (which proposes that elderly persons remain in active contact with their environment) and disengagement theory (which suggests adjustment comes through reduction of activity and social contact). Disengaged elderly were identified. Subjects demonstrated significant improvement over the untreated control subjects. Results…

  12. Comparison of fission neutron and pulsed spallation neutron sources for radiation effects experiments on Cu/sub 3/Au

    SciTech Connect

    Kirk, M.A.

    1983-10-01

    Through our recent experimental work on the neutron irradiation effects in Cu/sub 3/Au, we will compare fission and pulsed spallation neutron sources. Neutron characteristics of irradiation facilities at the Intense Pulsed Neutron Source (IPNS) and the CP-5 reactor (now closed down), are briefly described. Defect cascade size distributions from irradiations of Cu/sub 3/Au at both neutron sources illustrated by transmission electron micrographs of disordered zones. Radiation-enhanced diffusion experiments in Cu/sub 3/Au are discussed along with the effect of pulsed neutron irradiations.

  13. The Source Physics Experiments (SPE): A Physics-Based Approach to Discriminate Low-Yield Nuclear Events (Invited)

    NASA Astrophysics Data System (ADS)

    Snelson, C. M.; Chipman, V.; White, R. L.; Emmitt, R.; Townsend, M.

    2013-12-01

    Discriminating low-yield nuclear explosions is one of the current challenges in the field of monitoring and verification. Work is currently underway in Nevada to address this challenge by conducting a series of experiments using a physics-based approach. This has been accomplished by using a multifaceted, multi-disciplinary approach that includes a range of activities, from characterizing the shallow subsurface to acquiring new explosion data both in the near field (< 100 m from the source) to the far field (> 100 m to 10 s km from the source). The Source Physics Experiment (SPE) is a collaborative project between National Security Technologies, LLC, Lawrence Livermore National Laboratory, Los Alamos National Laboratory, Sandia National Laboratories, the Defense Threat Reduction Agency, and the Air Force Technical Applications Center. The goal of the SPE is to understand the transition of seismic energy from the near field to the far field; to understand the development of S-waves in explosives sources; and to understand how anisotropy controls seismic energy transmission and partitioning. To fully explore these problems, the SPE test series includes tests in both simple and complex geology cases. The current series is being conducted in a highly fractured granite body. This location was chosen, in part, because it was the location of previous nuclear tests in the same rock body and because generally the geology has been well characterized. In addition to historic data, high-resolution seismic reflection, cross-hole tomography, core samples, LIDAR, hyperspectral, and fracture mapping data have been acquired to further characterize and detect changes after each of the shot across the test bed. The complex geology series includes 7 planned shots using conventional explosives in the same shot hole surrounded by Continuous Reflectometry for Radius vs. Time Experiment (CORRTEX), Time of Arrival, Velocity of Detonation, down-hole accelerometers, surface accelerometers

  14. Modeling the Effect of External Carbon Source Addition under Different Electron Acceptor Conditions in Biological Nutrient Removal Activated Sludge Systems.

    PubMed

    Hu, Xiang; Wisniewski, Kamil; Czerwionka, Krzysztof; Zhou, Qi; Xie, Li; Makinia, Jacek

    2016-02-16

    The aim of this study was to expand the International Water Association Activated Sludge Model No. 2d (ASM2d) to predict the aerobic/anoxic behavior of polyphosphate accumulating organisms (PAOs) and "ordinary" heterotrophs in the presence of different external carbon sources and electron acceptors. The following new aspects were considered: (1) a new type of the readily biodegradable substrate, not available for the anaerobic activity of PAOs, (2) nitrite as an electron acceptor, and (3) acclimation of "ordinary" heterotrophs to the new external substrate via enzyme synthesis. The expanded model incorporated 30 new or modified process rate equations. The model was evaluated against data from several, especially designed laboratory experiments which focused on the combined effects of different types of external carbon sources (acetate, ethanol and fusel oil) and electron acceptors (dissolved oxygen, nitrate and nitrite) on the behavior of PAOs and "ordinary" heterotrophs. With the proposed expansions, it was possible to improve some deficiencies of the ASM2d in predicting the behavior of biological nutrient removal (BNR) systems with the addition of external carbon sources, including the effect of acclimation to the new carbon source. PMID:26783836

  15. Sustaining an Online, Shared Community Resource for Models, Robust Open source Software Tools and Data for Volcanology - the Vhub Experience

    NASA Astrophysics Data System (ADS)

    Patra, A. K.; Valentine, G. A.; Bursik, M. I.; Connor, C.; Connor, L.; Jones, M.; Simakov, N.; Aghakhani, H.; Jones-Ivey, R.; Kosar, T.; Zhang, B.

    2015-12-01

    Over the last 5 years we have created a community collaboratory Vhub.org [Palma et al, J. App. Volc. 3:2 doi:10.1186/2191-5040-3-2] as a place to find volcanology-related resources, and a venue for users to disseminate tools, teaching resources, data, and an online platform to support collaborative efforts. As the community (current active users > 6000 from an estimated community of comparable size) embeds the tools in the collaboratory into educational and research workflows it became imperative to: a) redesign tools into robust, open source reusable software for online and offline usage/enhancement; b) share large datasets with remote collaborators and other users seamlessly with security; c) support complex workflows for uncertainty analysis, validation and verification and data assimilation with large data. The focus on tool development/redevelopment has been twofold - firstly to use best practices in software engineering and new hardware like multi-core and graphic processing units. Secondly we wish to enhance capabilities to support inverse modeling, uncertainty quantification using large ensembles and design of experiments, calibration, validation. Among software engineering practices we practice are open source facilitating community contributions, modularity and reusability. Our initial targets are four popular tools on Vhub - TITAN2D, TEPHRA2, PUFF and LAVA. Use of tools like these requires many observation driven data sets e.g. digital elevation models of topography, satellite imagery, field observations on deposits etc. These data are often maintained in private repositories that are privately shared by "sneaker-net". As a partial solution to this we tested mechanisms using irods software for online sharing of private data with public metadata and access limits. Finally, we adapted use of workflow engines (e.g. Pegasus) to support the complex data and computing workflows needed for usage like uncertainty quantification for hazard analysis using physical

  16. The Source Physics Experiments (SPE) at the Nevada National Security Site (NNSS): An Overview

    NASA Astrophysics Data System (ADS)

    Snelson, C. M.; Chipman, V.; White, R. L.; Emmitt, R.; Townsend, M.; Barker, D.; Lee, P.

    2012-12-01

    Understanding the changes in seismic energy as it travels from the near field to the far field is the ultimate goal in monitoring for explosive events of interest. This requires a clear understanding of explosion phenomenology as it relates to seismic, infrasound, and acoustic signals. Although there has been much progress in modeling these phenomena, this has been primarily based in the empirical realm. As a result, the logical next step in advancing the seismic monitoring capability of the United States is to conduct field tests that can expand the predictive capability of the physics-based modeling currently under development. The Source Physics Experiment at the Nevada National Security Site (SPE) is the first step in this endeavor to link the empirically based with the physics-based modeling. This is a collaborative project between National Security Technologies (NSTec), Lawrence Livermore National Laboratory (LLNL), Los Alamos National Laboratory (LANL), Sandia National Laboratories (SNL), the Defense Threat Reduction Agency (DTRA), and the Air Force Technical Applications Center (AFTAC). The test series require both the simple and complex cases to fully characterize the problem, which is to understand the transition of seismic energy from the near field to the far field; to understand the development of S-waves in explosives sources; and how anisotropy controls seismic energy transmission and partitioning. The current series is being conducted in a granite body called the Climax Stock. This location was chosen for several reasons, including the fairly homogenous granite; the location of previous nuclear tests in the same rock body; and generally the geology has been well characterized. The simple geology series is planned for 7 shots using conventional explosives in the same shot hole surrounded by Continuous Reflectometry for Radius vs. Time Experiment (CORRTEX), Time of Arrival (TOA), Velocity of Detonation (VOD), down-hole accelerometers, surface

  17. An Overview of the Source Physics Experiment at the Nevada National Security Site (SPE-N)

    SciTech Connect

    Snelson, C. M., Chipman, V. D., White, R. L., Emmitt, R. F., Townsend, M. J., Barker, D., Lee, P.

    2012-07-11

    Understanding the changes in seismic energy as it travels from the near field to the far field is the ultimate goal in monitoring for explosive events of interest. This requires a clear understanding of explosion phenomenology as it relates to seismic, infrasound, and acoustic signals. Although there has been much progress in modeling these phenomena, this has been primarily based in the empirical realm. As a result, the logical next step in advancing the seismic monitoring capability of the United States is to conduct field tests that can expand the predictive capability of the physics-based modeling currently under development. The Source Physics Experiment at the Nevada National Security Site (SPE-N) is the first step in this endeavor to link the empirically based with the physics-based modeling. This is a collaborative project between National Security Technologies (NSTec), Lawrence Livermore National Laboratory (LLNL), Los Alamos National Laboratory (LANL), Sandia National Laboratories (SNL), the Defense Threat Reduction Agency (DTRA), and the Air Force Technical Applications Center (AFTAC). The test series require both the simple and complex cases to fully characterize the problem, which is to understand the transition of seismic energy from the near field to the far field; to understand the development of S-waves in explosives sources; and how anisotropy controls seismic energy transmission and partitioning. The current series is being conducted in a granite body called the Climax Stock. This location was chosen for several reasons, including the fairly homogenous granite; the location of previous nuclear tests in the same rock body; and generally the geology has been well characterized. The simple geology series is planned for 7 shots using conventional explosives in the same shot hole surrounded by Continuous Reflectometry for Radius vs. Time Experiment (CORRTEX), Time of Arrival (TOA), Velocity of Detonation (VOD), down-hole accelerometers, surface

  18. Social competence and collaborative guided inquiry science activities: Experiences of students with learning disabilities

    NASA Astrophysics Data System (ADS)

    Taylor, Jennifer Anne

    This thesis presents a qualitative investigation of the effects of social competence on the participation of students with learning disabilities (LD) in the science learning processes associated with collaborative, guided inquiry learning. An inclusive Grade 2 classroom provided the setting for the study. Detailed classroom observations were the primary source of data. In addition, the researcher conducted two interviews with the teacher, and collected samples of students' written work. The purpose of the research was to investigate: (a) How do teachers and peers mediate the participation of students with LD in collaborative, guided inquiry science activities, (b) What learning processes do students with LD participate in during collaborative, guided inquiry science activities, and (c) What components of social competence support and constrain the participation of students with LD during collaborative, guided inquiry science activities? The findings of the study suggest five key ideas for research and teaching in collaborative, guided inquiry science in inclusive classrooms. First, using a variety of collaborative learning formats (whole-class, small-group, and pairs) creates more opportunities for the successful participation of diverse students with LD. Second, creating an inclusive community where students feel accepted and valued may enhance the academic and social success of students with LD. Third, careful selection of partners for students with LD is important for a positive learning experience. Students with LD should be partnered with academically successful, socially competent peers; also, this study suggested that students with LD experience more success working collaboratively in pairs rather than in small groups. Fourth, a variety of strategies are needed to promote active participation and positive social interactions for students with and without LD during collaborative, guided inquiry learning. Fifth, adopting a general approach to teaching

  19. Preliminary Experiments on Noise Reduction in Cavities Using Active Impedance Changes

    NASA Astrophysics Data System (ADS)

    LACOUR, O.; GALLAND, M. A.; THENAIL, D.

    2000-02-01

    This paper reports experiments on the active control of enclosed sound fields via wall impedance changes. Two methods previously developed allow one to implement practically active acoustic impedances: the first is referred to as “direct” control and permits precise realizations for harmonic excitations, while the second is a hybrid passive/active feedback control well suited for random noise treatments. The two techniques have been already presented [1]; the contribution of this work relies on testing the efficiency of both systems in silencing two enclosures through experimental analyses, subsequently compared with classical analytical description. The first test cavity is one-dimensional; a global sound reduction is achieved by the hybrid system for a broadband primary excitation. The second system is a reactangular three-dimensional cavity closed by a simply supported elastic plate. The noise source is an external load applied at one point of the plate. Different impedance values are successively assigned, their effect being estimated through a global sound level indicator. Attention is also given to plate vibration changes, which may occur. Three typical behaviours of the plate-cavity system are investigated. A first experiment involves an excitation at an acoustic resonance and induces a weak plate-cavity coupling. The second, also at an acoustic resonance of the cavity, yields a strong coupling while the third corresponds to an off-resonance excitation. The hybrid feedback control system provides useful attenuation for all cases, and shows also a promising behaviour when dealing with broadband excitations. It confirms the interest of the method when classical feedforward active control fails, i.e., when reliable prior information of the undesired disturbance is not available.

  20. The MEG topography and the source model of abnormal neural activities associated with brain lesions

    SciTech Connect

    Ueno, S.; Iramina, K.; Ozaki, H.; Harada, K.

    1986-09-01

    A source model is proposed to simulate spatial distributions of abnormal MEG and EEG activities generated by abnormal neural activities such as the delta activity associated with brain tumors. Brain tumor itself is electrically silent and the spherical shell around the tumor might generate abnormal neural activities. The sources of these neural activities are represented by combinations of multiple current dipoles. The head is assumed to be a spherical volume conductor. Electrical potentials and magnetic fields over the surface of the spheres are calculated. The computer simulation shows that the MEG topography and EEG topography vary variously with combinations of location and orientation of the dipoles. In a special case, however, that the dipoles orient in the same direction or orient radially, the spatial patterns of the MEGs and EEGs generated by numerous dipoles are analogous to those generated by single dipoles.

  1. Geology of the Source Physics Experiment Site, Climax Stock, Nevada National Security Site

    SciTech Connect

    Townsend, M., Prothro, L. B., Obi, C.

    2012-03-15

    A test bed for a series of chemical explosives tests known as Source Physics Experiments (SPE) was constructed in granitic rock of the Climax stock, in northern Yucca Flat at the Nevada National Security Site in 2010-2011. These tests are sponsored by the U.S. Department of Energy, National Nuclear Security Administration's National Center for Nuclear Security. The test series is designed to study the generation and propagation of seismic waves, and will provide data that will improve the predictive capability of calculational models for detecting and characterizing underground explosions. Abundant geologic data are available for the area, primarily as a result of studies performed in conjunction with the three underground nuclear tests conducted in the Climax granite in the 1960s and a few later studies of various types. The SPE test bed was constructed at an elevation of approximately 1,524 meters (m), and consists of a 91.4-centimeter (cm) diameter source hole at its center, surrounded by two rings of three 20.3-cm diameter instrument holes. The inner ring of holes is positioned 10 m away from the source hole, and the outer ring of holes is positioned 20 m from the source hole. An initial 160-m deep core hole was drilled at the location of the source hole that provided information on the geology of the site and rock samples for later laboratory testing. A suite of geophysical logs was run in the core hole and all six instruments holes to obtain matrix and fracture properties. Detailed information on the character and density of fractures encountered was obtained from the borehole image logs run in the holes. A total of 2,488 fractures were identified in the seven boreholes, and these were ranked into six categories (0 through 5) on the basis of their degree of openness and continuity. The analysis presented here considered only the higher-ranked fractures (ranks 2 through 5), of which there were 1,215 (approximately 49 percent of all fractures identified from

  2. Measurement of the activity of an artificial neutrino source based on {sup 37}Ar

    SciTech Connect

    Abdurashitov, D. N.; Veretenkin, E. P.; Gavrin, V. N.; Gorbachev, V. V.; Ibragimova, T. V.; Kalikhov, A. V.; Mirmov, I. N. Shikhin, A. A.; Yants, V. E.; Barsanov, V. I.; Dzhanelidze, A. A.; Zlokazov, S. B.; Markov, S. Yu.; Shakirov, Z. N.; Cleveland, B. T.

    2007-02-15

    The activity of an artificial neutrino source based on {sup 37}Ar was measured by a specially developed method of directly counting {sup 37}Ar decays in a proportional counter. This source was used to irradiate the target of the SAGE radiochemical gallium-germanium neutrino telescope at the Baksan Neutrino Observatory (Institute for Nuclear Research, Russian Academy of Sciences, Moscow), whereupon the measurements were performed at the Institute of Reactor Materials (Zarechny, Sverdlovsk oblast, Russia). The method used to prepare gaseous samples for measurements in proportional counters and the counting procedure are described. The measured activity of the {sup 37}Ar neutrino source is 405.1 {+-} 3.7 kCi (corrected for decays that occurred within the period between the instant of activity measurement and the commencement of the irradiation of Ga target at 04:00 Moscow time, 30.04.2004)

  3. A laser-induced repetitive fast neutron source applied for gold activation analysis

    NASA Astrophysics Data System (ADS)

    Lee, Sungman; Park, Sangsoon; Lee, Kitae; Cha, Hyungki

    2012-12-01

    A laser-induced repetitively operated fast neutron source was developed for applications in laser-driven nuclear physics research. The developed neutron source, which has a neutron yield of approximately 4 × 105 n/pulse and can be operated up to a pulse repetition rate of 10 Hz, was applied for a gold activation analysis. Relatively strong delayed gamma spectra of the activated gold were measured at 333 keV and 355 keV, and proved the possibility of the neutron source for activation analyses. In addition, the nuclear reactions responsible for the measured gamma spectra of gold were elucidated by the 14 MeV fast neutrons resulting from the D(t,n)He4 nuclear reaction, for which the required tritium originated from the primary fusion reaction, D(d,p)T3.

  4. A laser-induced repetitive fast neutron source applied for gold activation analysis

    SciTech Connect

    Lee, Sungman; Park, Sangsoon; Lee, Kitae; Cha, Hyungki

    2012-12-15

    A laser-induced repetitively operated fast neutron source was developed for applications in laser-driven nuclear physics research. The developed neutron source, which has a neutron yield of approximately 4 Multiplication-Sign 10{sup 5} n/pulse and can be operated up to a pulse repetition rate of 10 Hz, was applied for a gold activation analysis. Relatively strong delayed gamma spectra of the activated gold were measured at 333 keV and 355 keV, and proved the possibility of the neutron source for activation analyses. In addition, the nuclear reactions responsible for the measured gamma spectra of gold were elucidated by the 14 MeV fast neutrons resulting from the D(t,n)He{sup 4} nuclear reaction, for which the required tritium originated from the primary fusion reaction, D(d,p)T{sup 3}.

  5. A laser-induced repetitive fast neutron source applied for gold activation analysis.

    PubMed

    Lee, Sungman; Park, Sangsoon; Lee, Kitae; Cha, Hyungki

    2012-12-01

    A laser-induced repetitively operated fast neutron source was developed for applications in laser-driven nuclear physics research. The developed neutron source, which has a neutron yield of approximately 4 × 10(5) n/pulse and can be operated up to a pulse repetition rate of 10 Hz, was applied for a gold activation analysis. Relatively strong delayed gamma spectra of the activated gold were measured at 333 keV and 355 keV, and proved the possibility of the neutron source for activation analyses. In addition, the nuclear reactions responsible for the measured gamma spectra of gold were elucidated by the 14 MeV fast neutrons resulting from the D(t,n)He(4) nuclear reaction, for which the required tritium originated from the primary fusion reaction, D(d,p)T(3). PMID:23277984

  6. Evidence for Infrared-faint Radio Sources as z > 1 Radio-loud Active Galactic Nuclei

    NASA Astrophysics Data System (ADS)

    Huynh, Minh T.; Norris, Ray P.; Siana, Brian; Middelberg, Enno

    2010-02-01

    Infrared-Faint Radio Sources (IFRSs) are a class of radio objects found in the Australia Telescope Large Area Survey which have no observable mid-infrared counterpart in the Spitzer Wide-area Infrared Extragalactic (SWIRE) survey. The extended Chandra Deep Field South now has even deeper Spitzer imaging (3.6-70 μm) from a number of Legacy surveys. We report the detections of two IFRS sources in IRAC images. The non-detection of two other IFRSs allows us to constrain the source type. Detailed modeling of the spectral energy distribution of these objects shows that they are consistent with high-redshift (z >~ 1) active galactic nuclei.

  7. Data Release Report for Source Physics Experiments 2 and 3 (SPE-2 and SPE-3) Nevada National Security Site

    SciTech Connect

    Townsend, Margaret; Obi, Curtis

    2015-01-26

    The second Source Physics Experiment shot (SPE-2) was conducted in Nevada on October 25, 2011, at 1900:00.011623 Greenwich Mean Time (GMT). The explosive source was 997 kilograms (kg) trinitrotoluene (TNT) equivalent of sensitized heavy ammonium fuel oil (SHANFO) detonated at a depth of 45.7 meters (m). The third Source Physics Experiment shot (SPE-3) was conducted in Nevada on July 24, 2012, at 1800:00.44835 GMT. The explosive source was 905 kg TNT equivalent of SHANFO detonated at a depth of 45.8 m. Both shots were recorded by an extensive set of instrumentation that includes sensors both at near-field (less than 100 m) and far-field (100 m or greater) distances. The near-field instruments consisted of three-component accelerometers deployed in boreholes at 15, 46, and 55 m depths around the shot and a set of single-component vertical accelerometers on the surface. The far-field network was composed of a variety of seismic and acoustic sensors, including short-period geophones, broadband seismometers, three-component accelerometers, and rotational seismometers at distances of 100 m to 25 kilometers. This report coincides with the release of these data for analysts and organizations that are not participants in this program. This report describes the second and third Source Physics Experiment shots and the various types of near-field and far-field data that are available.

  8. How Students Describe the Sources of Their Emotional and Motivational Experiences during the Learning Process: A Qualitative Approach

    ERIC Educational Resources Information Center

    Jarvenoja, Hanna; Jarvela, Sanna

    2005-01-01

    The aim of the study reported in this paper was to consider the sources of emotional and motivational experiences of secondary school students (N=18), 12-15 years old, during computer-supported collaborative learning projects. We chose the concept of volition to frame the analysis of the various kinds of descriptions the students give of their…

  9. Ion source for tests of ion behavior in the Karlsruhe tritium neutrino experiment beam line

    SciTech Connect

    Lukic, S.; Bornschein, B.; Drexlin, G.; Glueck, F.; Kazachenko, O.; Zoll, M. C. R.; Schoeppner, M.; Weinheimer, Ch.

    2011-01-15

    An electron-impact ion source based on photoelectron emission was developed for ionization of gases at pressures below 10{sup -4} mbar in an axial magnetic field in the order of 5 T. The ion source applies only dc fields, which makes it suitable for use in the presence of equipment sensitive to radio-frequency (RF) fields. The ion source was successfully tested under varying conditions regarding pressure, magnetic field, and magnetic-field gradient, and the results were studied with the help of simulations. The processes in the ion source are well understood, and possibilities for further optimization of generated ion currents are clarified.

  10. Physical activity policy and program development: the experience in Finland.

    PubMed Central

    Vuori, Ilkka; Lankenau, Becky; Pratt, Michael

    2004-01-01

    This article describes the development of sports and physical activity policies and programs in Finland during the past 30 years. The past two decades have been marked by a shift in emphasis from competitive and elite sports to health-enhancing physical activity for all, as seen most clearly in two successive sports acts and a government resolution. The new, increasingly multisectoral policies have led to substantial changes in the public funding of sports organizations, services, and construction of sports sites. Furthermore, three successive five-year national physical activity promotion programs have been launched. As a result, increased and new types of opportunities to participate in physical activity have become available, and the infrastructure and networks for provision of services have been strengthened. Until the mid 1990s, leisure time physical activity increased in Finland, but during the last seven to eight years, both leisure time and commuting physical activity have been stable. This finding may be an indication of the difficulty to increase physical activity in an industrialized country with already relatively high levels of physical activity even when systematic, long-term policies and measures are applied. PMID:15158112

  11. Active ion tracer experiments attempted in conjunction with the ion composition experiment on GEOS-2

    NASA Astrophysics Data System (ADS)

    Young, D. T.

    It is pointed out that to date six ion injection/tracer experiments have been attempted in conjunction with the GEOS-2 Ion Composition Experiment: three rocket borne Ba shaped-charge releases (Porcupine 3 and 4 and Ba-GEOS), one Li release, and two periods of operation of the Xe(+) accelerator on the SCATHA satellite. The characteristics of each of these six releases are outlined, and upper limits are placed on possible ion fluxes reaching GEOS-2. The order of magnitude of ion fluxes to be expected from each release is estimated, and it is shown that three of the experiments had no real chance of succeeding in the first place.

  12. Three-dimensional localization of low activity gamma-ray sources in real-time scenarios

    NASA Astrophysics Data System (ADS)

    Sharma, Manish K.; Alajo, Ayodeji B.; Lee, Hyoung K.

    2016-03-01

    Radioactive source localization plays an important role in tracking radiation threats in homeland security tasks. Its real-time application requires computationally efficient and reasonably accurate algorithms even with limited data to support detection with minimum uncertainty. This paper describes a statistic-based grid-refinement method for backtracing the position of a gamma-ray source in a three-dimensional domain in real-time. The developed algorithm used measurements from various known detector positions to localize the source. This algorithm is based on an inverse-square relationship between source intensity at a detector and the distance from the source to the detector. The domain discretization was developed and implemented in MATLAB. The algorithm was tested and verified from simulation results of an ideal case of a point source in non-attenuating medium. Subsequently, an experimental validation of the algorithm was performed to determine the suitability of deploying this scheme in real-time scenarios. Using the measurements from five known detector positions and for a measurement time of 3 min, the source position was estimated with an accuracy of approximately 53 cm. The accuracy improved and stabilized to approximately 25 cm for higher measurement times. It was concluded that the error in source localization was primarily due to detection uncertainties. In verification and experimental validation of the algorithm, the distance between 137Cs source and any detector position was between 0.84 m and 1.77 m. The results were also compared with the least squares method. Since the discretization algorithm was validated with a weak source, it is expected that it can localize the source of higher activity in real-time. It is believed that for the same physical placement of source and detectors, a source of approximate activity 0.61-0.92 mCi can be localized in real-time with 1 s of measurement time and same accuracy. The accuracy and computational efficiency

  13. Active Control of a Moving Noise SOURCE—EFFECT of Off-Axis Source Position

    NASA Astrophysics Data System (ADS)

    GUO, J.; PAN, J.; HODGSON, M.

    2002-03-01

    An optimally arranged multiple-channel active-control system is known to be able to create a large quiet zone in free space for a stationary primary noise source. When the primary noise source moves, the active control of the noise becomes much more difficult, as the primary noise field changes with time in space. In this case, the controller of the control system must respond fast enough to compensate for the change; much research has been focused on this issue. In this paper, it is shown that a moving source also causes difficulties from an acoustical perspective. A moving source not only changes continuously the strengths and phases of the sound field in the space, but also changes the wavefront of the primary sound field continuously. It is known that the efficiency of active noise control is determined mainly by the wavefront matching between the primary and control fields. To keep the control system effective in the case of a moving source, the wavefront of the control field needs to change, in order to continuously match the primary-wavefront change. This paper shows that there are limitations to the control-wavefront change. An optimally pre-arranged, multiple-channel control system is not able to construct a matching wavefront when the primary source moves outside a certain range. In other words, the control system is still able to create a large quiet zone only when the primary source moves within a range around the central axis of the control system. Both the location and the size of the quiet zone change with the location of the primary source.

  14. Critical source area management of agricultural phosphorus: experiences, challenges and opportunities

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The concept of critical source areas of phosphorus (P) loss produced by coinciding source and transport factors has been studied since the mid 1990s. It is widely recognized that identification of such areas has led to targeting of management strategies and conservation practices that more effectiv...

  15. Studies on the nitrate reductase activities of the fruit and the source leaf in pepper

    SciTech Connect

    Achhireddy, N.R.; Beevers, L.; Fletcher, J.S.

    1983-12-01

    Nitrate reductase (NR) activity (NO/sub 2//sup -/ produced in the dark and under anaerobic conditions) of 30-day-old fruit of Capsicum annuum L. was 2.2% that in tissues of a single leaf adjacent to each fruit (33 vs. 1500 nmoles/hr-g fresh weight). The optimal NR activity in one source leaf could only account for about 17% of the fruit's total nitrogen accumulation, while the fruit's own NR activity was almost negligible. Covered and uncovered fruits did not differ significantly in NR activities. 19 references, 1 figure, 1 table.

  16. Complex active regions as the main source of extreme and large solar proton events

    NASA Astrophysics Data System (ADS)

    Ishkov, V. N.

    2013-12-01

    A study of solar proton sources indicated that solar flare events responsible for ≥2000 pfu proton fluxes mostly occur in complex active regions (CARs), i.e., in transition structures between active regions and activity complexes. Different classes of similar structures and their relation to solar proton events (SPEs) and evolution, depending on the origination conditions, are considered. Arguments in favor of the fact that sunspot groups with extreme dimensions are CARs are presented. An analysis of the flare activity in a CAR resulted in the detection of "physical" boundaries, which separate magnetic structures of the same polarity and are responsible for the independent development of each structure.

  17. New light sources and sensors for active optical 3D inspection

    NASA Astrophysics Data System (ADS)

    Osten, Wolfgang; Jueptner, Werner P. O.

    1999-11-01

    The implementation of active processing strategies in optical 3D-inspection needs the availability of flexible hardware solutions. The system components illumination and sensor/detector are actively involved in the processing chain by a feedback loop that is controlled by the evaluation process. Therefore this article deals with new light sources and sensor which appeared recently on the market and can be applied successfully for the implementation of active processing principles. Some applications where such new components are used to implement an active measurement strategy are presented.

  18. Graduate Student Perceptions and Experiences of Professional Development Activities

    ERIC Educational Resources Information Center

    Rizzolo, Sonja; DeForest, Aubreena R.; DeCino, Daniel A.; Strear, Molly; Landram, Suzanne

    2016-01-01

    Graduate higher education has done little to assess and understand graduate students' needs and experiences beyond the classroom. Therefore, we conducted a phenomenological study using multiple data collection tools, including survey and focus groups from two different time periods to implement a multiphase needs assessment. The goal of the…

  19. Aerosol Composition, Chemistry, and Source Characterization during the 2008 VOCALS Experiment

    NASA Astrophysics Data System (ADS)

    Lee, Y.; Springston, S.; Jayne, J. T.; Wang, J.; Senum, G.; Hubbe, J.; Alexander, L.; Brioude, J.; Spak, S.; Mena-Carrasco, M.; Kleinman, L. I.; Daum, P. H.

    2009-12-01

    Chemical composition of fine aerosol particles over the northern Chilean coastal waters was determined on board the US DOE G-1 aircraft during the VOCALS (VAMOS Ocean-Cloud-Atmosphere-Land Study) field experiment between October 16 and November 15, 2008. Chemical species determined included SO42-, NO3-, NH4+, and total organics (Org) using an Aerodyne Aerosol Mass Spectrometer, and SO42-, NO3-, NH4+, Na+, Cl-, CH3SO3-, Mg2+, Ca2+, and K+ using a particle-into-liquid sampler-ion chromatography technique. The results show the marine boundary layer (MBL) aerosol mass was dominated by non-sea-salt SO42- followed by Na+, Cl-, Org, NO3-, and NH4+, in decreasing importance; CH3SO3-, Ca2+, and K+ rarely exceeded their respective limits of detection. The SO42- aerosols were strongly acidic as the equivalent NH4+ to SO42- ratio was only ~0.25 on average. NaCl particles, presumably of sea-salt origin, showed chloride deficits but retained Cl- typically more than half the equivalency of Na+, and are believed to be externally mixed with the acidic sulfate aerosols. Nitrate was observed only on sea-salt particles, consistent with adsorption of HNO3 on non-acidic sea-salt aerosols, responsible partly for the Cl- deficit. Dust particles appeared to play a minor role judging from the small volume differences between that derived from the observed mass concentrations and that calculated based on particle size distributions. Because SO42- concentrations in the study domain were substantial (~0.5 - ~3 μg/m3) with a strong gradient (highest near the shore decreasing with distance from land), and the ocean-emitted dimethylsulfide and its unique oxidation product, CH3SO3-, were very low (i.e., ≤ 40 parts per trillion and <0.05 μg/m3, respectively), the observed SO42- aerosols are believed to be primarily of terrestrial origin. Back trajectory calculations indicate sulfur emissions from smelters and power plants along coastal regions of Peru and Chile are the main sources of these SO4

  20. Active Drumming Experience Increases Infants’ Sensitivity to Audiovisual Synchrony during Observed Drumming Actions

    PubMed Central

    Timmers, Renee; Hunnius, Sabine

    2015-01-01

    In the current study, we examined the role of active experience on sensitivity to multisensory synchrony in six-month-old infants in a musical context. In the first of two experiments, we trained infants to produce a novel multimodal effect (i.e., a drum beat) and assessed the effects of this training, relative to no training, on their later perception of the synchrony between audio and visual presentation of the drumming action. In a second experiment, we then contrasted this active experience with the observation of drumming in order to test whether observation of the audiovisual effect was as effective for sensitivity to multimodal synchrony as active experience. Our results indicated that active experience provided a unique benefit above and beyond observational experience, providing insights on the embodied roots of (early) music perception and cognition. PMID:26111226

  1. Sources and magnitude of variability in pedometer-determined physical activity levels of youth

    PubMed Central

    Kim, So-Yeun; Park, Hye-Sang

    2015-01-01

    This study examined sources of variability in habitual physical activity of children, and the minimum number of days required for estimating children’s habitual physical activity levels using pedometers. A total of 31 children wore two pedometers during five weekdays and four weekend days. A two random facet completely crossed design was conducted with two-way analysis of variances across weekdays, weekends, and weekdays and weekend days combined. Moderate/high generalizability coefficients were estimated across all days. Primary sources of variability were variance components of the person and person by day interaction. Minimum numbers of days required for estimating habitual physical activity levels using a pedometer were five during weekdays. However, estimating habitual physical activity levels during weekends, and weekdays and weekend days combined was impractical. PMID:26730388

  2. Activation process in excitable systems with multiple noise sources: One and two interacting units.

    PubMed

    Franović, Igor; Todorović, Kristina; Perc, Matjaž; Vasović, Nebojša; Burić, Nikola

    2015-12-01

    We consider the coaction of two distinct noise sources on the activation process of a single excitable unit and two interacting excitable units, which are mathematically described by the Fitzhugh-Nagumo equations. We determine the most probable activation paths around which the corresponding stochastic trajectories are clustered. The key point lies in introducing appropriate boundary conditions that are relevant for a class II excitable unit, which can be immediately generalized also to scenarios involving two coupled units. We analyze the effects of the two noise sources on the statistical features of the activation process, in particular demonstrating how these are modified due to the linear or nonlinear form of interactions. Universal properties of the activation process are qualitatively discussed in the light of a stochastic bifurcation that underlies the transition from a stochastically stable fixed point to continuous oscillations. PMID:26764778

  3. Transport of hydrocarbons from an emplaced fuel source experiment in the vadose zone at Airbase Vaerløse, Denmark.

    PubMed

    Christophersen, Mette; Broholm, Mette M; Mosbaek, Hans; Karapanagioti, Hrissi K; Burganos, Vasilis N; Kjeldsen, Peter

    2005-12-01

    An emplaced hydrocarbon source field experiment was conducted in the relatively homogeneous sandy geology of the vadose zone at Airbase Vaerløse, Denmark. The source (10.2 l of NAPL) consisted of 13 hydrocarbons (n-, iso- and cyclo-alkanes and aromates) and CFC-113 as a tracer. Monitoring in the 107 soil gas probes placed out to 20 m from the centre of the source showed spreading of all the compounds in the pore air and all compounds were measured in the pore air within a few hours after source emplacement. Seven of the fourteen compounds were depleted from the source within the 1 year of monitoring. The organic vapours in the pore air migrated radially from the source. The CFC-113 concentrations seemed to be higher in the deeper soil gas probes compared with the hydrocarbons, indicating a high loss of CFC-113 to the atmosphere and the lack of degradation of CFC-113. For the first days after source emplacement, the transport of CFC-113, hexane and toluene was successfully simulated using a radial gas-phase diffusion model for the unsaturated zone. Groundwater pollution caused by the vadose zone hydrocarbon vapours was only detected in the upper 30 cm of the underlying groundwater and only during the first 3 months of the experiment. Only the most water-soluble compounds were detected in the groundwater and concentrations decreased sharply with depth (approximately one order of magnitude within 10 cm depth) to non-detect at 30 cm depth. The groundwater table varied more than 1 m within the measurement period. However that did not influence the direction of the groundwater flow. Approximately 7 months after source emplacement the groundwater table rose more than 1 m within 1 month. That did not cause additional pollution of the groundwater. PMID:16102873

  4. [Effect of Zn(II) on microbial activity in anaerobic acid mine drainage treatment system with biomass as carbon source].

    PubMed

    Li, Shao-Jie; Chen, Tian-Hu; Zhou, Yue-Fei; Yue, Zheng-Bo; Jin, Jiez; Liu, Chang

    2012-01-01

    In this study, with rape straw as carbon source, anaerobic batch experiments were executed to investigate the effect of Zn (II) on the activity of sulphate reducing bacteria (SRB) in the microbial treatment of simulative acid mine drainage (AMD). The results showed that during the 60 experimental days, when initial Zn2+ concentrations were in the range of 73.7 to 196.8 mg x L(-1), SRB had high culturalbility. At the end of these experiments, pH values rose from initial 5.0 to neutral, about 96% of sulphate was reduced and the concentrations of Zn2+ reduced to 0.05 mg x L(-1). The results of Tessier sequential extraction, field emission scanning electron microscope (FE-SEM) and X-ray diffraction(XRD) showed that Zn was found to be fixed through forming organic and sulphide (mainly sphalerite) compounds. For the experiment with high Zn2+ concentration (262.97 mg x L(-1)), at the end of experiments, pH values dropped from initial 5.0 to 4.0, only 27% of sulphate was only reduced and the concentrations of Zn2+ kept in high range (25 mg x L(-1)), the activity of SRB significantly inhibited. This study indicated that: (1) Rape straw can be used as slow-release carbon source for long-term anaerobic AMD treatment; (2) Rape straw can decrease the toxicity of Zn2+ to SRB through adsorption; (3) In anaerobic AMD treatment system, Zn can be fixed by sulphide minerals with mediation of SRB. PMID:22452225

  5. Influence of source composition and particle energy on the determination of gross alpha activity.

    PubMed

    Timón, A Fernández; Vargas, M Jurado; Sánchez, A B Ruano; Pérez, J de la Torre; Sánchez, A Martín

    2013-12-01

    The influence of different source compositions and α-particle energies on the detection efficiency of a gas-flow proportional counter was examined using experimental measurements and Monte Carlo simulations. Efficiency variation with alpha-particle energy was very marked, being less significant with the substrate composition. These results show that the determination of gross alpha activity in an unknown sample must be carried out very carefully in order to give a correct estimation of its activity. PMID:24184741

  6. Advanced Control Strategy for Single-Phase Voltage-Source Active Rectifier with Low Harmonic Emission

    NASA Astrophysics Data System (ADS)

    Blahník, Vojtĕch; Peroutka, Zdenĕk; Talla, Jakub

    2014-03-01

    This paper introduces the advanced control of single-phase voltage-source active rectifier. This control provide direct control of trolley-wire current and active damping of low-frequency disturbances at the converter ac side. Our proposed control strategy combines PR controller with feed-forward model and low-frequency harmonic compensator based on resonant controllers. Achieved experimental results show excellent converter behavior, where converter is fed by strongly distorted supply voltage.

  7. Geologic Assessment of the Damage Zone from the Second Test at Source Physics Experiment-Nevada (SPE-N)

    SciTech Connect

    Townsend, M. J.; Huckins-Gang, H. E.; Prothro, L. B.; Reed, D. N.

    2012-12-01

    The National Center for Nuclear Security, established by the U.S. Department of Energy, National Nuclear Security Administration (NNSA), is conducting a series of explosive tests at the Nevada National Security Site that are designed to increase the understanding of certain basic physical phenomena associated with underground explosions. These tests will aid in developing technologies that might be used to detect underground nuclear explosions in support of verification activities for the Comprehensive Nuclear-Test-Ban Treaty. The initial project is a series of explosive tests, known collectively as the Source Physics Experiment-Nevada (SPE-N), being conducted in granitic rocks. The SPE-N test series is designed to study the generation and propagation of seismic waves. The results will help advance the seismic monitoring capability of the United States by improving the predictive capability of physics-based modeling of explosive phenomena. The first SPE N (SPE-N-1) test was conducted in May 2011, using 100 kg of explosives at the depth of 54.9 m in the U 15n source hole. SPE-N-2 was conducted in October 2011, using 1,000 kg of explosives at the depth of 45.7 m in the same source hole. The SPE-N-3 test was conducted in the same source hole in July 2012, using the same amount and type of explosive as for SPE-N-2, and at the same depth as SPE-N-2, within the damage zone created by the SPE-N-2 explosion to investigate damage effects on seismic wave propagation. Following the SPE-N-2 shot and prior to the SPE-N-3 shot, the core hole U-15n#10 was drilled at an angle from the surface to intercept the SPE-N-2 shot point location to obtain information necessary to characterize the damage zone. The objective was to determine the position of the damage zone near the shot point, at least on the northeast, where the core hole penetrated it, and obtain information on the properties of the damaged medium. Geologic characterization of the post-SPE-N-2 core hole included

  8. Renewable energy and rural development activities experience in Bangladesh

    SciTech Connect

    Barua, D.C.

    1997-12-01

    The per capita per year fuel consumption in Bangladesh is only 56 kg oil equivalent. The supply of electricity by Bangladesh power development board (BPDB) and Dhaka electricity supply authority (DESA) is mainly confined to cities and towns. Rural Electrification Board (REB) distributes electricity to the rural people through cooperatives. The rural cooperatives cover only 10% of the total population. Only about 15% of the total population is directly connected to the electricity. In order to meet the increasing energy demand for development of agriculture and industry and for the generation of better employment opportunities, it will be necessary to harness all the available alternative sources of energy immediately.

  9. Plasma and Beam Production Experiments with HYBRIS, a Microwave-assisted H- Ion Source

    NASA Astrophysics Data System (ADS)

    Keller, R.; Kwan, J.; Hahto, S.; Regis, M.; Wallig, J.

    2007-08-01

    A two-stage ion source concept was presented a few years ago, consisting of a proven H- ion source and a 2.45-GHz Electron Cyclotron-Resonance (ECR) type ion source, here used as a plasma cathode. This paper describes the experimental development path pursued at Lawrence Berkeley National Laboratory, from the early concept to a working unit that produces plasma in both stages and creates a negative particle beam. Without cesiation applied to the second stage, the H- fraction of this beam is very low, yielding 75 micro-amperes of extracted ion beam current at best. The apparent limitations of this approach and envisaged improvements are discussed.

  10. Deutsche Bundespost/FTZ activities in the Olympus experimentation program: Ojectives and experiment set-ups

    NASA Astrophysics Data System (ADS)

    Lugert, M.

    1989-05-01

    The activities of the Telecommunications Engineering Center (FTZ) of the Deutsche Bundespost in the Olympus Experimentation Program are presented. The various communication experiments which are to be carried out in the framework of the GECO (Group of Experimenters of CEPT Administrations for Olympus) are described. These include: TV news gathering/TV distribution, teleseminar experiments, data distribution to microterminal experiments, SMS-TDMA (time division multiple access) experiments, and TDMA frequency diversity experiments. The applied experiment configurations and the layout and design of the transportable 20/30 GHz earth stations to be used in the experiments are described.

  11. ALLStars: Overcoming Multi-Survey Selection Bias using Crowd-Sourced Active Learning

    NASA Astrophysics Data System (ADS)

    Starr, D. L.; Richards, J. W.; Brink, H.; Miller, A. A.; Bloom, J. S.; Butler, N. R.; James, J. B.; Long, J. P.

    2012-09-01

    Developing a multi-survey time-series classifier presents several challenges. One problem is overcoming the sample selection bias which arises when the instruments or observing cadences differ between the training and testing datasets. In this case, the probabilistic distributions characterizing the sources in the training survey dataset differ from the source distributions in the other survey, resulting in poor results when a classifier is naively applied. To resolve this, we have developed the ALLStars active learning framework which allows us to bootstrap a classifier onto a new survey using a small set of optimally chosen sources which are then presented to users for manual classification. Several iterations of this crowd-sourcing process results in a significantly improved classifier. Using this procedure, we have built a variable star light-curve classifier using OGLE, Hipparcos, and ASAS survey data.

  12. The Main Sources of Intersubject Variability in Neuronal Activation for Reading Aloud

    ERIC Educational Resources Information Center

    Kherif, Ferath; Josse, Goulven; Seghier, Mohamed L.; Price, Cathy J.

    2009-01-01

    The aim of this study was to find the most prominent source of intersubject variability in neuronal activation for reading familiar words aloud. To this end, we collected functional imaging data from a large sample of subjects (n = 76) with different demographic characteristics such as handedness, sex, and age, while reading. The…

  13. Measuring the activity of a 51Cr neutrino source based on the gamma-radiation spectrum

    NASA Astrophysics Data System (ADS)

    Gorbachev, V. V.; Gavrin, V. N.; Ibragimova, T. V.; Kalikhov, A. V.; Malyshkin, Yu. M.; Shikhin, A. A.

    2015-12-01

    A technique for the measurement of activities of intense β sources by measuring the continuous gamma-radiation (internal bremsstrahlung) spectra is developed. A method for reconstructing the spectrum recorded by a germanium semiconductor detector is described. A method for the absolute measurement of the internal bremsstrahlung spectrum of 51Cr is presented.

  14. Promoting Conceptual Change through Active Learning Using Open Source Software for Physics Simulations

    ERIC Educational Resources Information Center

    Baser, Mustafa

    2006-01-01

    This paper reports upon an active learning approach that promotes conceptual change when studying direct current electricity circuits, using free open source software, "Qucs". The study involved a total of 102 prospective mathematics teacher students. Prior to instruction, students' understanding of direct current electricity was determined by a…

  15. Subcritical measurements of the WINCO slab tank experiment using the source-jerk technique

    SciTech Connect

    Spriggs, G.D.; Hansen, G.E.; Martin, E.R.; Plassmann, E.A.; Pederson, R.A.; Schlesser, J.A.; Krawczyk, T.L.; Tanner, J.E.; Smolen, G.R.; Martin Marietta Energy Systems, Inc., Oak Ridge, TN; Westinghouse Idaho Nuclear Co., Inc., Idaho Falls, ID; Martin Marietta Energy Systems, Inc., Oak Ridge, TN )

    1989-01-01

    Subcritical measurements of the WINCO slab tank using the source-jerk technique are presented. This technique determines subcriticality by analyzing the transient response produced by the sudden removal of an extraneous neutron source (i.e., a source jerk). We have found that the technique can provide an accurate means of measuring k in configurations that are close to critical (i.e., 0.90 < k < 1.0). As the system becomes more subcritical (i.e., k < 0.90), spatial effects introduce significant biases depending on the source and detector positions. A comparison between the measurements and Monte Carlo code calculations is also presented. 15 refs., 6 figs., 2 tabs.

  16. Apollo experience report: Assessment of metabolic expenditures. [extravehicular activity

    NASA Technical Reports Server (NTRS)

    Waligora, J. M.; Hawkins, W. R.; Humbert, G. F.; Nelson, L. J.; Vogel, S. J.; Kuznetz, L. H.

    1975-01-01

    A significant effort was made to assess the metabolic expenditure for extravehicular activity on the lunar surface. After evaluation of the real-time data available to the flight controller during extravehicular activity, three independent methods of metabolic assessment were chosen based on the relationship between heart rate and metabolic production, between oxygen consumption and metabolic production, and between the thermodynamics of the liquid-cooled garment and metabolic production. The metabolic assessment procedure is analyzed and discussed. Real-time use of this information by the Apollo flight surgeon is discussed. Results and analyses of the Apollo missions and comments concerning future applications are included.

  17. Active Noise Control Experiments using Sound Energy Flu

    NASA Astrophysics Data System (ADS)

    Krause, Uli

    2015-03-01

    This paper reports on the latest results concerning the active noise control approach using net flow of acoustic energy. The test set-up consists of two loudspeakers simulating the engine noise and two smaller loudspeakers which belong to the active noise system. The system is completed by two acceleration sensors and one microphone per loudspeaker. The microphones are located in the near sound field of the loudspeakers. The control algorithm including the update equation of the feed-forward controller is introduced. Numerical simulations are performed with a comparison to a state of the art method minimising the radiated sound power. The proposed approach is experimentally validated.

  18. Some experiences with active control of aeroelastic response

    NASA Technical Reports Server (NTRS)

    Newsom, J. R.; Abel, I.

    1981-01-01

    Flight and wind tunnel tests were conducted and multidiscipline computer programs were developed as part of investigations of active control technology conducted at the NASA Langley Research Center. Unsteady aerodynamics approximation, optimal control theory, optimal controller design, and the Delta wing and DC-10 models are described. The drones for aerodynamics and structural testing (DAST program) for evaluating procedures for aerodynamic loads prediction and the design of active control systems on wings with significant aeroelastic effects is described as well as the DAST model used in the wind tunnel tests.

  19. Experiments with planar inductive ion source meant for creation ofH+ Beams

    SciTech Connect

    Vainionpaa, J.H.; Kalvas, T.; Hahto, S.K.; Reijonen, J.

    2007-02-07

    In this article the effect of different engineering parameters of an rf-driven ion sources with external spiral antenna and quartz disk rf-window are studied. Paper consists of three main topics: The effect of source geometry on the operation gas pressure, the effect of source materials and magnetic confinement on extracted current density and ion species and the effect of different antenna geometries on the extracted current density. The operation gas pressure as a function of the plasma chamber diameter, was studied. This was done with three cylindrical plasma chambers with different inner diameters. The chamber materials were studied using two materials, aluminum and alumina (AlO{sub 2}). The removable 14 magnet multicusp confinement arrangement enabled us to compare the effects of the two wall materials with and without the magnetic confinement. Highest proton fraction of {approx} 8% at 2000 W of rf-power and at pressure of 1.3 Pa was measured using AlO{sub 2} plasma chamber and no multicusp confinement. For all the compared ion sources at 1000W of rf-power, source with multicusp confinement and AlO2 plasma chamber yields highest current density of 82.7 mA/cm{sup 2} at operation pressure of 4 Pa. From the same source highest measured current density of 143 mA/cm{sup 2} at 1.3 Pa and 2200W of rf-power was achieved. Multicusp confinement increased the maximum extracted current up to factor of two. Plasma production with different antenna geometries was also studied. Antenna tests were performed using same source geometry as in source material study with AlO{sub 2} plasma chamber and multicusp confinement. The highest current density was achieved with 4.5 loop solenoid antenna with 6 cm diameter. Slightly lower current density with lower pressure was achieved using tightly wound 3 loop spiral antenna with 3.3 cm ID and 6 cm OD.

  20. Assessing Acoustic Sound Levels Associated with Active Source Seismic Surveys in Shallow Marine Environments

    NASA Astrophysics Data System (ADS)

    Bohnenstiehl, D. R.; Tolstoy, M.; Thode, A.; Diebold, J. B.; Webb, S. C.

    2004-12-01

    The potential effect of active source seismic research on marine mammal populations is a topic of increasing concern, and controversy surrounding such operations has begun to impact the planning and permitting of academic surveys [e.g., Malakoff, 2002 Science]. Although no causal relationship between marine mammal strandings and seismic exploration has been proven, any circumstantial evidence must be thoroughly investigated. A 2002 stranding of two beaked whales in the Gulf of California within 50 km of a R/V Ewing seismic survey has been a subject of concern for both marine seismologists and environmentalists. In order to better understand possible received levels for whales in the vicinity of these operations, modeling is combined with ground-truth calibration measurements. A wide-angle parabolic equation model, which is capable of including shear within the sediment and basement layers, is used to generate predictive models of low-frequency transmission loss within the Gulf of California. This work incorporates range-dependent bathymetry, sediment thickness, sound velocity structure and sub-bottom properties. Oceanic sounds speed profiles are derived from the U.S. Navy's seasonal GDEM model and sediment thicknesses are taken from NOAA's worldwide database. The spectral content of the Ewing's 20-airgun seismic array is constrained by field calibration in the spring of 2003 [Tolstoy et al., 2004 GRL], indicating peak energies at frequencies below a few hundred Hz, with energy spectral density showing an approximate power-law decrease at higher frequencies (being ~40 dB below peak at 1 kHz). Transmission loss is estimated along a series of radials extending from multiple positions along the ship's track, with the directivity of the array accounted for by phase-shifting point sources that are scaled by the cube root of the individual airgun volumes. This allows the time-space history of low-frequency received levels to be reconstructed within the Gulf of California

  1. Accumulated source imaging of brain activity with both low and high-frequency neuromagnetic signals

    PubMed Central

    Xiang, Jing; Luo, Qian; Kotecha, Rupesh; Korman, Abraham; Zhang, Fawen; Luo, Huan; Fujiwara, Hisako; Hemasilpin, Nat; Rose, Douglas F.

    2014-01-01

    Recent studies have revealed the importance of high-frequency brain signals (>70 Hz). One challenge of high-frequency signal analysis is that the size of time-frequency representation of high-frequency brain signals could be larger than 1 terabytes (TB), which is beyond the upper limits of a typical computer workstation's memory (<196 GB). The aim of the present study is to develop a new method to provide greater sensitivity in detecting high-frequency magnetoencephalography (MEG) signals in a single automated and versatile interface, rather than the more traditional, time-intensive visual inspection methods, which may take up to several days. To address the aim, we developed a new method, accumulated source imaging, defined as the volumetric summation of source activity over a period of time. This method analyzes signals in both low- (1~70 Hz) and high-frequency (70~200 Hz) ranges at source levels. To extract meaningful information from MEG signals at sensor space, the signals were decomposed to channel-cross-channel matrix (CxC) representing the spatiotemporal patterns of every possible sensor-pair. A new algorithm was developed and tested by calculating the optimal CxC and source location-orientation weights for volumetric source imaging, thereby minimizing multi-source interference and reducing computational cost. The new method was implemented in C/C++ and tested with MEG data recorded from clinical epilepsy patients. The results of experimental data demonstrated that accumulated source imaging could effectively summarize and visualize MEG recordings within 12.7 h by using approximately 10 GB of computer memory. In contrast to the conventional method of visually identifying multi-frequency epileptic activities that traditionally took 2–3 days and used 1–2 TB storage, the new approach can quantify epileptic abnormalities in both low- and high-frequency ranges at source levels, using much less time and computer memory. PMID:24904402

  2. Sequence Dance for Lifelong Leisure Activity: An International Experience!

    ERIC Educational Resources Information Center

    Bennett, John P.

    This paper provides the outline of a session in dance at the annual meeting of the American Alliance for Health, Physical Education, Recreation, and Dance. The purpose of the session was to provide an opportunity to celebrate individual differences while learning new skills for lifelong leisure activity through an English dance form known as…

  3. Report on active and planned spacecraft and experiments

    NASA Technical Reports Server (NTRS)

    Horowitz, R. (Editor); Nostreys, R. W. (Editor)

    1980-01-01

    Information on current and planned spacecraft activity for a broad range of scientific disciplines is presented. The information covers a wide range of disciplines: astronomy, Earth sciences, meteorology, planetary sciences, aeronomy, particles and fields, solar physics, life sciences, and material sciences. These spacecraft projects represent the efforts and funding of individual countries as well as cooperative arrangements among different countries.

  4. SMAPVEX08: Soil Moisture Active Passive Validation Experiment 2008

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The Soil Moisture Active Passive Mission (SMAP) is currently addressing issues related to the development and selection of retrieval algorithms as well as refining the mission design and instruments. Some of these issues require resolution as soon as possible. Several forums had identified specific ...

  5. The Intercollegiate Ethics Bowl: An Active Learning Experience

    ERIC Educational Resources Information Center

    Meyer, Tracy

    2012-01-01

    This paper introduces the Intercollegiate Ethics Bowl (IEB) as a means of promoting active learning in the realm of marketing ethics. The cases discussed in the competition are based on current ethical issues and require students to provide a coherent analysis of what are generally complex, ambiguous, and highly viewpoint dependent issues. The…

  6. Experiments on active precision isolation with a smart conical adapter

    NASA Astrophysics Data System (ADS)

    Li, H.; Li, H. Y.; Chen, Z. B.; Tzou, H. S.

    2016-07-01

    Based on a conical shell adaptor, an active vibration isolator for vibration control of precision payload is designed and tested in this study. Flexible piezoelectric sensors and actuators are bonded on the adaptor surface for active vibration monitoring and control. The mathematical model of a piezoelectric laminated conical shell is derived and then optimal design of the actuators is performed for the first axial vibration mode of the isolation system. A scaled conical adaptor is manufactured with four MFC actuators laminating on its outer surface. Active vibration isolation efficiency is then evaluated on a vibration shaker. The control model is built in Matlab/Simulink and programmed into the dSPACE control board. Experimental results show that, the proposed active isolator is effective in vibration suppression of payloads with the negative velocity feedback control. In contrast, the amplitude responses increase with positive feedback control. Furthermore, the amplitude responses increases when time delay is added into the control signals, and gets the maximum when the delay is close to one quarter of one cycle time.

  7. Significant Life Experiences Revisited: A Review of Research on Sources of Environmental Sensitivity.

    ERIC Educational Resources Information Center

    Chawla, Louise

    1998-01-01

    States that environmental sensitivity, an important variable in environmental awareness and in the predisposition to take responsible environmental action, has been the subject of research in which sensitivity is associated with particular kinds of significant life experiences. Reviews studies of the significant life experiences of environmental…

  8. Differences in Developmental Experiences for Commonly Used Categories of Organized Youth Activities

    ERIC Educational Resources Information Center

    Hansen, David M.; Skorupski, William P.; Arrington, Tiffany L.

    2010-01-01

    The coherence of adolescents' self-reported learning experiences between subgroups of organized youth activities within five commonly used categories was evaluated. Data for the present study come from a representative sample of eleventh grade adolescents' reports on learning experiences in an organized youth activity using the Youth Experience…

  9. Supplement no. 1 to the January 1974 report on active and planned spacecraft and experiments

    NASA Technical Reports Server (NTRS)

    Horowitz, R.; Davis, L. R.

    1974-01-01

    Updated information and descriptions on spacecraft and experiments are listed according to spacecraft name and principle experimental investigator. A cumulative index of active and planned spacecraft and experiments is provided; bar graph indexes for electromagnetic radiation experiments are included in table form.

  10. Results of Skylab medical experiment M171-metabolic activity

    NASA Technical Reports Server (NTRS)

    Michel, E. L.; Rummel, J. A.; Sawin, C. F.; Buderer, M. C.; Lem, J. D.

    1977-01-01

    The primary objective of the experiment was to determine whether man's metabolic effectiveness while performing mechanical work was progressively altered by exposure to the space environment. The secondary objective was to evaluate the M171 bicycle ergometer as an in-flight crew personal exerciser. This manuscript is the report of the third (Skylab 4) manned mission and a summary of what was learned from all three Skylab manned missions about the physiological response to exercise during and after periods of 28 days, 59 days, and 84 days of weightlessness, respectively.

  11. SHS Processes in microgravity activities: first experiments in space

    NASA Astrophysics Data System (ADS)

    Merzhanov, Alexander G.

    Some data for study of self-propagating high-temperature synthesis (SHS) under microgravity are analyzed. This research direction seems to be promising because SHS is normally accompanied by such gravity-sensitive events as: melting of reagents and products, spreading of melt, coalescence of droplets, diffusion and convection in molten metals and nonmetals, buoyancy of solid particles and bubbles in the melt, nucleation of solid products, crystal growth, and sample deformation. The experiments carried out on the ground, under conditions of elevated artificial gravity, during parabolic flights, and aboard the Mir Space Station demonstrated a marked effect of gravity both on the process and products.

  12. Working Group 5: Measurements technology and active experiments

    NASA Technical Reports Server (NTRS)

    Whipple, E.; Barfield, J. N.; Faelthammar, C.-G.; Feynman, J.; Quinn, J. N.; Roberts, W.; Stone, N.; Taylor, W. L.

    1986-01-01

    Technology issues identified by working groups 5 are listed. (1) New instruments are needed to upgrade the ability to measure plasma properties in space. (2) Facilities should be developed for conducting a broad range of plasma experiments in space. (3) The ability to predict plasma weather within magnetospheres should be improved and a capability to modify plasma weather developed. (4) Methods of control of plasma spacecraft and spacecraft plasma interference should be upgraded. (5) The space station laboratory facilities should be designed with attention to problems of flexibility to allow for future growth. These issues are discussed.

  13. Localization of short-range acoustic and seismic wideband sources: Algorithms and experiments

    NASA Astrophysics Data System (ADS)

    Stafsudd, J. Z.; Asgari, S.; Hudson, R.; Yao, K.; Taciroglu, E.

    2008-04-01

    We consider the determination of the location (source localization) of a disturbance source which emits acoustic and/or seismic signals. We devise an enhanced approximate maximum-likelihood (AML) algorithm to process data collected at acoustic sensors (microphones) belonging to an array of, non-collocated but otherwise identical, sensors. The approximate maximum-likelihood algorithm exploits the time-delay-of-arrival of acoustic signals at different sensors, and yields the source location. For processing the seismic signals, we investigate two distinct algorithms, both of which process data collected at a single measurement station comprising a triaxial accelerometer, to determine direction-of-arrival. The direction-of-arrivals determined at each sensor station are then combined using a weighted least-squares approach for source localization. The first of the direction-of-arrival estimation algorithms is based on the spectral decomposition of the covariance matrix, while the second is based on surface wave analysis. Both of the seismic source localization algorithms have their roots in seismology; and covariance matrix analysis had been successfully employed in applications where the source and the sensors (array) are typically separated by planetary distances (i.e., hundreds to thousands of kilometers). Here, we focus on very-short distances (e.g., less than one hundred meters) instead, with an outlook to applications in multi-modal surveillance, including target detection, tracking, and zone intrusion. We demonstrate the utility of the aforementioned algorithms through a series of open-field tests wherein we successfully localize wideband acoustic and/or seismic sources. We also investigate a basic strategy for fusion of results yielded by acoustic and seismic arrays.

  14. Catalytic activity of nuclease P1: Experiment and theory

    SciTech Connect

    Miller, J.H.; Falcone, J.M.; Shibata, M.; Box, H.C.

    1994-10-01

    Nuclease P1 from Penicillium citrinum is a zinc dependent glyco-enzyme that recognizes single stranded DNA and RNA as substrates and hydrolyzes the phosphate ester bond. Nuclease Pl seems to recognize particular conformations of the phosphodiester backbone and shows significant variation in the rate of hydrolytic activity depending upon which nucleosides are coupled by the phosphodiester bond. The efficiency of nuclease Pl in hydrolyzing the phosphodiester bonds of a substrate can be altered by modifications to one of the substrate bases induced by ionizing radiation or oxidative stress. Measurements have been made of the effect of several radiation induced lesions on the catalytic rate of nuclease Pl. A model of the structure of the enzyme has been constructed in order to better understand the binding and activity of this enzyme on various ssDNA substrates.

  15. Experiments on active isolation using distributed PVDF error sensors

    NASA Technical Reports Server (NTRS)

    Lefebvre, S.; Guigou, C.; Fuller, C. R.

    1992-01-01

    A control system based on a two-channel narrow-band LMS algorithm is used to isolate periodic vibration at low frequencies on a structure composed of a rigid top plate mounted on a flexible receiving plate. The control performance of distributed PVDF error sensors and accelerometer point sensors is compared. For both sensors, high levels of global reduction, up to 32 dB, have been obtained. It is found that, by driving the PVDF strip output voltage to zero, the controller may force the structure to vibrate so that the integration of the strain under the length of the PVDF strip is zero. This ability of the PVDF sensors to act as spatial filters is especially relevant in active control of sound radiation. It is concluded that the PVDF sensors are flexible, nonfragile, and inexpensive and can be used as strain sensors for active control applications of vibration isolation and sound radiation.

  16. [Improving public health and hygiene surveillance activity: the Lombardy experience].

    PubMed

    Poloni, M

    2012-01-01

    In light of changing health needs, it has become a necessity to modify the instruments used in prevention, and this is thanks also to all the new preventive health professions that have been added to the existing ones. This presentation describes the results of the activities of prevention and control of occupational injuries, environmental hygiene and food and nutrition security in the Lombardy Region. PMID:22880384

  17. Active spacecraft potential control: An ion emitter experiment. [Cluster mission

    NASA Technical Reports Server (NTRS)

    Riedler, W.; Goldstein, R.; Hamelin, M.; Maehlum, B. N.; Troim, J.; Olsen, R. C.; Pedersen, A.; Grard, R. J. L.; Schmidt, R.; Rudenauer, F.

    1988-01-01

    The cluster spacecraft are instrumented with ion emitters for charge neutralization. The emitters produce indium ions at 6 keV. The ion current is adjusted in a feedback loop with instruments measuring the spacecraft potential. The system is based on the evaporation of indium in the apex field of a needle. The design of the active spacecraft potential control instruments, and the ion emitters is presented.

  18. Toward effective source apportionment using positive matrix factorization: experiments with simulated PM2.5 data.

    PubMed

    Chen, L W Antony; Lowenthal, Douglas H; Watson, John G; Koracin, Darko; Kumar, Naresh; Knipping, Eladio M; Wheeler, Neil; Craig, Kenneth; Reid, Stephen

    2010-01-01

    To elucidate the relationship between factors resolved by the positive matrix factorization (PMF) receptor model and actual emission sources and to refine the PMF modeling strategy, speciated PM2.5 (particulate matter with aerodynamic diameter < 2.5 microm) data generated from a state-of-the-art chemical transport model for two rural sites in the eastern United States are subjected to PMF analysis. In addition to chi2 and R2 used to infer the quality of fitting, the interpretability of PMF factors with respect to known primary and secondary sources is evaluated using a root mean square difference analysis. For the most part, factors are found to represent imperfect combinations of sources, and the optimal number of factors should be just adequate to explain the input data (e.g., R2 > 0.95). Retaining more factors in the model does not help resolve minor sources, unless temporal resolution of the data is increased, thus allowing more information to be used by the model. If guided with a priori knowledge of source markers and/or special events, rotation of factors leads to more interpretable PMF factors. The choice of uncertainty weighting coefficients greatly influences the PMF modeling results, but it cannot usually be determined for simulated or real-world data. A simple test is recommended to check whether the weighting coefficients are suitable. However, uncertainties in the data divert PMF solutions even when the optimal weighting coefficients and number of factors are in place. PMID:20102034

  19. A radio source occultation experiment with comet Austin 1982g, with unusual results

    NASA Technical Reports Server (NTRS)

    De Pater, I.; Ip, W.-H.

    1984-01-01

    A radio source occultation by comet Austin 1982g was observed on September 15-16, 1982. A change in the apparent position of 1242 + 41 by 1.3 arcsec occurred when the source was 220,000 km away from the cometary ion tail. If this change was due to refraction by the cometary plasma, it indicates an electron density of the plasma of about 10,000/cu cm. When the radio source was on the other side of the plasma tail, at a distance of 230,000 km, the position angle of the electric vector of the radio source changed gradually over about 140 deg within two hours. This observation cannot be explained in terms of ionospheric Faraday rotation, and results from either an intrinsic change in the radio source or Faraday rotation in the cometary plasma due to a change in the direction and/or strength of the magnetic field. In the latter case, the cometary coma must have an electron density and a magnetic field strength orders of magnitude larger than current theories predict.

  20. Characterization of spatially resolved high resolution x-ray spectrometers for high energy density physics and light source experiments

    SciTech Connect

    Hill, K. W. Bitter, M.; Delgado-Aparacio, L.; Efthimion, P.; Pablant, N. A.; Lu, J.; Beiersdorfer, P.; Chen, H.; Magee, E.

    2014-11-15

    A high resolution 1D imaging x-ray spectrometer concept comprising a spherically bent crystal and a 2D pixelated detector is being optimized for diagnostics of small sources such as high energy density physics (HEDP) and synchrotron radiation or x-ray free electron laser experiments. This instrument is used on tokamak experiments for Doppler measurements of ion temperature and plasma flow velocity profiles. Laboratory measurements demonstrate a resolving power, E/ΔE of order 10 000 and spatial resolution better than 10 μm. Initial tests of the high resolution instrument on HEDP plasmas are being performed.

  1. Measuring spatial variability of vapor flux to characterize vadose-zone VOC sources: Flow-cell experiments

    NASA Astrophysics Data System (ADS)

    Mainhagu, J.; Morrison, C.; Truex, M.; Oostrom, M.; Brusseau, M. L.

    2014-10-01

    A method termed vapor-phase tomography has recently been proposed to characterize the distribution of volatile organic contaminant mass in vadose-zone source areas, and to measure associated three-dimensional distributions of local contaminant mass discharge. The method is based on measuring the spatial variability of vapor flux, and thus inherent to its effectiveness is the premise that the magnitudes and temporal variability of vapor concentrations measured at different monitoring points within the interrogated area will be a function of the geospatial positions of the points relative to the source location. A series of flow-cell experiments was conducted to evaluate this premise. A well-defined source zone was created by injection and extraction of a non-reactive gas (SF6). Spatial and temporal concentration distributions obtained from the tests were compared to simulations produced with a mathematical model describing advective and diffusive transport. Tests were conducted to characterize both areal and vertical components of the application. Decreases in concentration over time were observed for monitoring points located on the opposite side of the source zone from the local-extraction point, whereas increases were observed for monitoring points located between the local-extraction point and the source zone. The results illustrate that comparison of temporal concentration profiles obtained at various monitoring points gives a general indication of the source location with respect to the extraction and monitoring points.

  2. Measuring Spatial Variability of Vapor Flux to Characterize Vadose-zone VOC Sources: Flow-cell Experiments

    SciTech Connect

    Mainhagu, Jon; Morrison, C.; Truex, Michael J.; Oostrom, Martinus; Brusseau, Mark

    2014-08-05

    A method termed vapor-phase tomography has recently been proposed to characterize the distribution of volatile organic contaminant mass in vadose-zone source areas, and to measure associated three-dimensional distributions of local contaminant mass discharge. The method is based on measuring the spatial variability of vapor flux, and thus inherent to its effectiveness is the premise that the magnitudes and temporal variability of vapor concentrations measured at different monitoring points within the interrogated area will be a function of the geospatial positions of the points relative to the source location. A series of flow-cell experiments was conducted to evaluate this premise. A well-defined source zone was created by injection and extraction of a non-reactive gas (SF6). Spatial and temporal concentration distributions obtained from the tests were compared to simulations produced with a mathematical model describing advective and diffusive transport. Tests were conducted to characterize both areal and vertical components of the application. Decreases in concentration over time were observed for monitoring points located on the opposite side of the source zone from the local–extraction point, whereas increases were observed for monitoring points located between the local–extraction point and the source zone. We found that the results illustrate that comparison of temporal concentration profiles obtained at various monitoring points gives a general indication of the source location with respect to the extraction and monitoring points.

  3. Measuring Spatial Variability of Vapor Flux to Characterize Vadose-zone VOC Sources: Flow-cell Experiments

    DOE PAGESBeta

    Mainhagu, Jon; Morrison, C.; Truex, Michael J.; Oostrom, Martinus; Brusseau, Mark

    2014-08-05

    A method termed vapor-phase tomography has recently been proposed to characterize the distribution of volatile organic contaminant mass in vadose-zone source areas, and to measure associated three-dimensional distributions of local contaminant mass discharge. The method is based on measuring the spatial variability of vapor flux, and thus inherent to its effectiveness is the premise that the magnitudes and temporal variability of vapor concentrations measured at different monitoring points within the interrogated area will be a function of the geospatial positions of the points relative to the source location. A series of flow-cell experiments was conducted to evaluate this premise. Amore » well-defined source zone was created by injection and extraction of a non-reactive gas (SF6). Spatial and temporal concentration distributions obtained from the tests were compared to simulations produced with a mathematical model describing advective and diffusive transport. Tests were conducted to characterize both areal and vertical components of the application. Decreases in concentration over time were observed for monitoring points located on the opposite side of the source zone from the local–extraction point, whereas increases were observed for monitoring points located between the local–extraction point and the source zone. We found that the results illustrate that comparison of temporal concentration profiles obtained at various monitoring points gives a general indication of the source location with respect to the extraction and monitoring points.« less

  4. Measuring Spatial Variability of Vapor Flux to Characterize Vadose-zone VOC Sources: Flow-cell Experiments

    PubMed Central

    Morrison, C.; Truex, M.; Oostrom, M.; Brusseau, M.L.

    2014-01-01

    A method termed vapor-phase tomography has recently been proposed to characterize the distribution of volatile organic contaminant mass in vadose-zone source areas, and to measure associated three-dimensional distributions of local contaminant mass discharge. The method is based on measuring the spatial variability of vapor flux, and thus inherent to its effectiveness is the premise that the magnitudes and temporal variability of vapor concentrations measured at different monitoring points within the interrogated area will be a function of the geospatial positions of the points relative to the source location. A series of flow-cell experiments was conducted to evaluate this premise. A well-defined source zone was created by injection and extraction of a non-reactive gas (SF6). Spatial and temporal concentration distributions obtained from the tests were compared to simulations produced with a mathematical model describing advective and diffusive transport. Tests were conducted to characterize both areal and vertical components of the application. Decreases in concentration over time were observed for monitoring points located on the opposite side of the source zone from the local–extraction point, whereas increases were observed for monitoring points located between the local–extraction point and the source zone. The results illustrate that comparison of temporal concentration profiles obtained at various monitoring points gives a general indication of the source location with respect to the extraction and monitoring points. PMID:25171394

  5. Measuring spatial variability of vapor flux to characterize vadose-zone VOC sources: flow-cell experiments.

    PubMed

    Mainhagu, J; Morrison, C; Truex, M; Oostrom, M; Brusseau, M L

    2014-10-15

    A method termed vapor-phase tomography has recently been proposed to characterize the distribution of volatile organic contaminant mass in vadose-zone source areas, and to measure associated three-dimensional distributions of local contaminant mass discharge. The method is based on measuring the spatial variability of vapor flux, and thus inherent to its effectiveness is the premise that the magnitudes and temporal variability of vapor concentrations measured at different monitoring points within the interrogated area will be a function of the geospatial positions of the points relative to the source location. A series of flow-cell experiments was conducted to evaluate this premise. A well-defined source zone was created by injection and extraction of a non-reactive gas (SF6). Spatial and temporal concentration distributions obtained from the tests were compared to simulations produced with a mathematical model describing advective and diffusive transport. Tests were conducted to characterize both areal and vertical components of the application. Decreases in concentration over time were observed for monitoring points located on the opposite side of the source zone from the local-extraction point, whereas increases were observed for monitoring points located between the local-extraction point and the source zone. The results illustrate that comparison of temporal concentration profiles obtained at various monitoring points gives a general indication of the source location with respect to the extraction and monitoring points. PMID:25171394

  6. Measuring Spatial Variability of Vapor Flux to Characterize Vadose-zone VOC Sources: Flow-cell Experiments

    SciTech Connect

    Mainhagu, Jon; Morrison, C.; Truex, Michael J.; Oostrom, Martinus; Brusseau, Mark

    2014-10-20

    A method termed vapor-phase tomography has recently been proposed to characterize the distribution of volatile organic contaminant mass in vadose-zone source areas, and to measure associated three-dimensional distributions of local contaminant mass discharge. The method is based on measuring the spatial variability of vapor flux, and thus inherent to its effectiveness is the premise that the magnitudes and temporal variability of vapor concentrations measured at different monitoring points within the interrogated area will be a function of the geospatial positions of the points relative to the source location. A series of flow-cell experiments was conducted to evaluate this premise. A well-defined source zone was created by injection and extraction of a non-reactive gas (SF6). Spatial and temporal concentration distributions obtained from the tests were compared to simulations produced with a mathematical model describing advective and diffusive transport. Tests were conducted to characterize both areal and vertical components of the application. Decreases in concentration over time were observed for monitoring points located on the opposite side of the source zone from the local–extraction point, whereas increases were observed for monitoring points located between the local–extraction point and the source zone. The results illustrate that comparison of temporal concentration profiles obtained at various monitoring points gives a general indication of the source location with respect to the extraction and monitoring points.

  7. Shear bond strength to enamel after power bleaching activated by different sources.

    PubMed

    Can-Karabulut, Deniz C; Karabulut, Baris

    2010-01-01

    The purpose of the present study was to evaluate enamel bond strength of a composite resin material after hydrogen peroxide bleaching, activated by a diode laser (LaserSmile), an ozone device (HealOzone), a light-emitting diode (BT Cool whitening system), and a quartz-Plus. Fifty extracted caries-free permanent incisors were used in this study. Thirty-eight percent hydrogen peroxidegel was applied to sound, flattened labial enamel surfaces and activated by different sources. Enamel surfaces that had received no treatment were used as control samples. Bonding agent was applied according to the manufacturer's instructions and the adhesion test was performed according to ISO/TS 11405. Statistical analysis showed significant influence of the different activation technique of hydrogen peroxide on shear bond strength to enamel (ANOVA, LSD, P < 0.05). The data in this vitro explorative study suggest the activation of hydrogen peroxide by different sources may further affect the shear bond strength of subsequent composite resin restoration to enamel. Within the limitations of this in vitro study, further studies examining the structural changes of activated hydrogen peroxide-treated enamel are needed. Due to the different activation methods; duration of light irradiation effects, longer time periods may be needed before application of adhesive restorations to enamel, compared with non-activated bleaching. PMID:21069109

  8. Nitrogen source activates TOR (target of rapamycin) complex 1 via glutamine and independently of Gtr/Rag proteins.

    PubMed

    Stracka, Daniele; Jozefczuk, Szymon; Rudroff, Florian; Sauer, Uwe; Hall, Michael N

    2014-09-01

    The evolutionary conserved TOR complex 1 (TORC1) activates cell growth in response to nutrients. In yeast, TORC1 responds to the nitrogen source via a poorly understood mechanism. Leucine, and perhaps other amino acids, activates TORC1 via the small GTPases Gtr1 and Gtr2, orthologs of the mammalian Rag GTPases. Here we investigate the activation of TORC1 by the nitrogen source and how this might be related to TORC1 activation by Gtr/Rag. The quality of the nitrogen source, as defined by its ability to promote growth and glutamine accumulation, directly correlates with its ability to activate TORC1 as measured by Sch9 phosphorylation. Preferred nitrogen sources stimulate rapid, sustained Sch9 phosphorylation and glutamine accumulation. Inhibition of glutamine synthesis reduces TORC1 activity and growth. Poor nitrogen sources stimulate rapid but transient Sch9 phosphorylation. A Gtr1 deficiency prevents the transient stimulation of TORC1 but does not affect the sustained TORC1 activity in response to good nitrogen sources. These findings suggest that the nitrogen source must be converted to glutamine, the preferred nitrogen source in yeast, to sustain TORC1 activity. Furthermore, sustained TORC1 activity is independent of Gtr/Rag. Thus, the nitrogen source and Gtr/Rag activate TORC1 via different mechanisms. PMID:25063813

  9. A novel method for active fissile mass estimation with a pulsed neutron source

    NASA Astrophysics Data System (ADS)

    Dubi, C.; Ridnik, T.; Israelashvili, I.; Pedersen, B.

    2013-07-01

    Neutron interrogation facilities for mass evaluation of Special Nuclear Materials (SNM) samples are divided into two main categories: passive interrogation, where all neutron detections are due to spontaneous events, and active interrogation, where fissions are induced on the tested material by an external neutron source. While active methods are, in general, faster and more effective, their analysis is much harder to carry out. In the paper, we will introduce a new formalism for analyzing the detection signal generated by a pulsed source active interrogation facility. The analysis is aimed to distinct between fission neutrons from the main neutron source in the system, and the surrounding "neutron noise". In particular, we derive analytic expressions for the first three central moments of the number of detections in a given time interval, in terms of the different neutron sources. While the method depends on exactly the same physical assumptions as known models, the simplicity of the suggested formalism allows us to take into account the variance of the external neutron source—an effect that was so far neglected.

  10. Simultaneous usage of pinhole and penumbral apertures for imaging small scale neutron sources from inertial confinement fusion experiments.

    PubMed

    Guler, N; Volegov, P; Danly, C R; Grim, G P; Merrill, F E; Wilde, C H

    2012-10-01

    Inertial confinement fusion experiments at the National Ignition Facility are designed to understand the basic principles of creating self-sustaining fusion reactions by laser driven compression of deuterium-tritium (DT) filled cryogenic plastic capsules. The neutron imaging diagnostic provides information on the distribution of the central fusion reaction region and the surrounding DT fuel by observing neutron images in two different energy bands for primary (13-17 MeV) and down-scattered (6-12 MeV) neutrons. From this, the final shape and size of the compressed capsule can be estimated and the symmetry of the compression can be inferred. These experiments provide small sources with high yield neutron flux. An aperture design that includes an array of pinholes and penumbral apertures has provided the opportunity to image the same source with two different techniques. This allows for an evaluation of these different aperture designs and reconstruction algorithms. PMID:23126842

  11. Isotopic Identification of Nitrate Sources and Cycling in Arctic Tundra Active Layer Soils and Permafrost

    NASA Astrophysics Data System (ADS)

    Heikoop, J. M.; Throckmorton, H.; Newman, B. D.; Perkins, G.; Gard, M.; Iversen, C. M.; Wilson, C. J.; Wullschleger, S. D.

    2014-12-01

    The effect of nitrogen cycling on release of carbon from tundra ecosystems is being studied as part of the US Department of Energy Next Generation Ecosystem Experiment - Arctic project. Sampling and analysis of active layer soil water at the Barrow Environmental Observatory (Alaska, USA) was performed in ancient drained thaw lake basins (DTLBs), drainages, and in polygonal terrain associated with inter-DTLB tundra. Within active layer soils, nitrate was most commonly found above analytical limits of detection in pore water from the unsaturated centers of high-centered polygons. Nitrate has also been detected, though less frequently, in soil water immediately above the frost table of an ancient (14C age of 2000 - 5500 BP) DTLB and in a small drainage adjacent to high-centered polygonal terrain. Nitrate from high-centered polygons had δ15N ranging from -9.2 to +8.5 ‰ and δ18O ranging from -8.4 to +1.4 ‰. The δ15N isotopic range is consistent with microbial mineralization and nitrification of reduced nitrogen sources including ammonium, dissolved organic nitrogen, and soil organic nitrogen. The range in δ18O of nitrate is also consistent with nitrification based on the δ18O of site waters. No evidence for an atmospheric nitrate signal, as defined by δ15N and δ18O of nitrate in snow and snowmelt, is seen. In contrast, nitrate in permafrost appears to be a mixture of pre-industrial atmospheric nitrate (with higher δ15N than modern atmospheric nitrate) and nitrate that is microbial in origin. Massive ice wedges appear to contain larger proportions of snowmelt (based on δ18O of ice) and atmospheric nitrate, whereas textural ice appears to contain a greater proportion of summer precipitation and microbially-derived nitrate. Nitrate from the ancient DTLB and drainage samples also has isotopic signatures that appear to represent a mixture of pre-industrial atmospheric nitrate and nitrate from microbial nitrification, and may, at least in part, be derived from

  12. Time-Dependent Moment Tensors of the First Four Source Physics Experiments (SPE) Explosions

    NASA Astrophysics Data System (ADS)

    Yang, X.

    2015-12-01

    We use mainly vertical-component geophone data within 2 km from the epicenter to invert for time-dependent moment tensors of the first four SPE explosions: SPE-1, SPE-2, SPE-3 and SPE-4Prime. We employ a one-dimensional (1D) velocity model developed from P- and Rg-wave travel times for Green's function calculations. The attenuation structure of the model is developed from P- and Rg-wave amplitudes. We select data for the inversion based on the criterion that they show consistent travel times and amplitude behavior as those predicted by the 1D model. Due to limited azimuthal coverage of the sources and the mostly vertical-component-only nature of the dataset, only long-period, diagonal components of the moment tensors are well constrained. Nevertheless, the moment tensors, particularly their isotropic components, provide reasonable estimates of the long-period source amplitudes as well as estimates of corner frequencies, albeit with larger uncertainties. The estimated corner frequencies, however, are consistent with estimates from ratios of seismogram spectra from different explosions. These long-period source amplitudes and corner frequencies cannot be fit by classical P-wave explosion source models. The results motivate the development of new P-wave source models suitable for these chemical explosions. To that end, we fit inverted moment-tensor spectra by modifying the classical explosion model using regressions of estimated source parameters. Although the number of data points used in the regression is small, the approach suggests a way for the new-model development when more data are collected.

  13. Data Release Report for Source Physics Experiments 2 and 3 (SPE-2 and SPE-3) Nevada National Security Site

    SciTech Connect

    Townsend, Margaret; Obi, Curtis

    2015-04-30

    The second Source Physics Experiment shot (SPE-2) was conducted in Nevada on October 25, 2011, at 1900:00.011623 Greenwich Mean Time (GMT). The explosive source was 997 kilograms (kg) trinitrotoluene (TNT) equivalent of sensitized heavy ammonium fuel oil (SHANFO) detonated at a depth of 45.7 meters (m). The third Source Physics Experiment shot (SPE-3) was conducted in Nevada on July 24, 2012, at 1800:00.44835 GMT. The explosive source was 905 kg TNT equivalent of SHANFO detonated at a depth of 45.8 m. Both shots were recorded by an extensive set of instrumentation that includes sensors both at near-field (less than 100 m) and far-field (100 m or greater) distances. The near-field instruments consisted of three-component accelerometers deployed in boreholes at 15, 46, and 55 m depths around the shot and a set of single-component vertical accelerometers on the surface. The far-field network was composed of a variety of seismic and acoustic sensors, including short-period geophones, broadband seismometers, three-component accelerometers, and rotational seismometers at distances of 100 m to 25 kilometers. This report coincides with the release of these data for analysts and organizations that are not participants in this program. This report describes the second and third Source Physics Experiment shots and the various types of near-field and farfield data that are available.This revised document includes reports on baseline shift corrections for the SPE-2 and SPE-3 shots that were missing from the original January 2015 version.

  14. Mechanistic formulation of a lineal-quadratic-linear (LQL) model: Split-dose experiments and exponentially decaying sources

    SciTech Connect

    Guerrero, Mariana; Carlone, Marco

    2010-08-15

    Purpose: In recent years, several models were proposed that modify the standard linear-quadratic (LQ) model to make the predicted survival curve linear at high doses. Most of these models are purely phenomenological and can only be applied in the particular case of acute doses per fraction. The authors consider a mechanistic formulation of a linear-quadratic-linear (LQL) model in the case of split-dose experiments and exponentially decaying sources. This model provides a comprehensive description of radiation response for arbitrary dose rate and fractionation with only one additional parameter. Methods: The authors use a compartmental formulation of the LQL model from the literature. They analytically solve the model's differential equations for the case of a split-dose experiment and for an exponentially decaying source. They compare the solutions of the survival fraction with the standard LQ equations and with the lethal-potentially lethal (LPL) model. Results: In the case of the split-dose experiment, the LQL model predicts a recovery ratio as a function of dose per fraction that deviates from the square law of the standard LQ. The survival fraction as a function of time between fractions follows a similar exponential law as the LQ but adds a multiplicative factor to the LQ parameter {beta}. The LQL solution for the split-dose experiment is very close to the LPL prediction. For the decaying source, the differences between the LQL and the LQ solutions are negligible when the half-life of the source is much larger than the characteristic repair time, which is the clinically relevant case. Conclusions: The compartmental formulation of the LQL model can be used for arbitrary dose rates and provides a comprehensive description of dose response. When the survival fraction for acute doses is linear for high dose, a deviation of the square law formula of the recovery ratio for split doses is also predicted.

  15. Experiences from long range passive and active imaging

    NASA Astrophysics Data System (ADS)

    Grönwall, Christina; Gustafsson, David; Steinvall, Ove; Tolt, Gustav

    2015-10-01

    We present algorithm evaluations for ATR of small sea vessels. The targets are at km distance from the sensors, which means that the algorithms have to deal with images affected by turbulence and mirage phenomena. We evaluate previously developed algorithms for registration of 3D-generating laser radar data. The evaluations indicate that some robustness to turbulence and mirage induced uncertainties can be handled by our probabilistic-based registration method. We also assess methods for target classification and target recognition on these new 3D data. An algorithm for detecting moving vessels in infrared image sequences is presented; it is based on optical flow estimation. Detection of moving target with an unknown spectral signature in a maritime environment is a challenging problem due to camera motion, background clutter, turbulence and the presence of mirage. First, the optical flow caused by the camera motion is eliminated by estimating the global flow in the image. Second, connected regions containing significant motions that differ from camera motion is extracted. It is assumed that motion caused by a moving vessel is more temporally stable than motion caused by mirage or turbulence. Furthermore, it is assumed that the motion caused by the vessel is more homogenous with respect to both magnitude and orientation, than motion caused by mirage and turbulence. Sufficiently large connected regions with a flow of acceptable magnitude and orientation are considered target regions. The method is evaluated on newly collected sequences of SWIR and MWIR images, with varying targets, target ranges and background clutter. Finally we discuss a concept for combining passive and active imaging in an ATR process. The main steps are passive imaging for target detection, active imaging for target/background segmentation and a fusion of passive and active imaging for target recognition.

  16. Experiments on the active control of transitional boundary layers

    NASA Astrophysics Data System (ADS)

    Nelson, P. A.; Rioual, J.-L.; Fisher, M. J.

    Experimental results are presented which demonstrate that the streamwise position of the transition region of a flat plate boundary layer can be actively controlled. The means of control is through the application of suction through the surface of the plate, a progressive increase in suction rate being capable of producing transition at progressively larger distances downstream from the plate leading edge. A simple digital feedback regulator based on an integral control law is shown to be most effective in regulating the position of transition, an error signal being derived from measurements of pressure fluctuations on the surface of the plate.

  17. Paper 58714 - Exploring activated faults hydromechanical processes from semi-controled field injection experiments

    NASA Astrophysics Data System (ADS)

    Guglielmi, Y.; Cappa, F.; Nussbaum, C.

    2015-12-01

    The appreciation of the sensitivity of fractures and fault zones to fluid-induced-deformations in the subsurface is a key question in predicting the reservoir/caprock system integrity around fluid manipulations with applications to reservoir leakage and induced seismicity. It is also a question of interest in understanding earthquakes source, and recently the hydraulic behavior of clay faults under a potential reactivation around nuclear underground depository sites. Fault and fractures dynamics studies face two key problems (1) the up-scaling of laboratory determined properties and constitutive laws to the reservoir scale which is not straightforward when considering faults and fractures heterogeneities, (2) the difficulties to control both the induced seismicity and the stimulated zone geometry when a fault is reactivated. Using instruments dedicated to measuring coupled pore pressures and deformations downhole, we conducted field academic experiments to characterize fractures and fault zones hydromechanical properties as a function of their multi-scale architecture, and to monitor their dynamic behavior during the earthquake nucleation process. We show experiments on reservoir or cover rocks analogues in underground research laboratories where experimental conditions can be optimized. Key result of these experiments is to highlight how important the aseismic fault activation is compared to the induced seismicity. We show that about 80% of the fault kinematic moment is aseismic and discuss the complex associated fault friction coefficient variations. We identify that the slip stability and the slip velocity are mainly controlled by the rate of the permeability/porosity increase, and discuss the conditions for slip nucleation leading to seismic instability.

  18. Design of interferometer system for Keda Torus eXperiment using terahertz solid-state diode sources

    SciTech Connect

    Xie, Jinlin Wang, Haibo; Li, Hong; Lan, Tao; Liu, Adi; Liu, Wandong; Yu, Changxuan; Ding, Weixing

    2014-11-15

    A solid-state source based terahertz (THz) interferometer diagnostic system has been designed and characterized for the Keda Torus eXperiment (KTX). The THz interferometer utilizes the planar diodes based frequency multiplier (X48) to provide the probing beam at fixed frequency 0.650 THz, and local oscillator is provided by an independent solid-state diode source with tunable frequency (0.650 THz +/− 10 MHz). Both solid-state sources have approximately 1 mW power. The planar-diode mixers optimized for high sensitivity, ∼750 mV/mW, are used in the heterodyne detection system, which permits multichannel interferometer on KTX with a low phase noise. A sensitivity of {sub min} = 4.5 × 10{sup 16} m{sup −2} and a temporal resolution of 0.2 μs have been achieved during the initial bench test.

  19. First application of the Laser Ion Source and Trap (LIST) for on-line experiments at ISOLDE

    NASA Astrophysics Data System (ADS)

    Fink, D. A.; Richter, S. D.; Bastin, B.; Blaum, K.; Catherall, R.; Cocolios, T. E.; Fedorov, D. V.; Fedosseev, V. N.; Flanagan, K. T.; Ghys, L.; Gottberg, A.; Imai, N.; Kron, T.; Lecesne, N.; Lynch, K. M.; Marsh, B. A.; Mendonca, T. M.; Pauwels, D.; Rapisarda, E.; Ramos, J. P.; Rossel, R. E.; Rothe, S.; Seliverstov, M. D.; Sjödin, M.; Stora, T.; Van Beveren, C.; Wendt, K. D. A.

    2013-12-01

    The Laser Ion Source and Trap (LIST) provides a new mode of operation for the resonance ionization laser ion source (RILIS) at ISOLDE/CERN, reducing the amount of surface-ionized isobaric contaminants by up to four orders of magnitude. After the first successful on-line test at ISOLDE in 2011 the LIST was further improved in terms of efficiency, selectivity, and reliability through several off-line tests at Mainz University and at ISOLDE. In September 2012, the first on-line physics experiments to use the LIST took place at ISOLDE. The measurements of the improved LIST indicate more than a twofold increase in efficiency compared to the LIST of the 2011 run. The suppression of surface-ionized francium contaminants has enabled the first in-source laser spectroscopy of 217Po and 219Po.

  20. fMRI activation patterns in an analytic reasoning task: consistency with EEG source localization

    NASA Astrophysics Data System (ADS)

    Li, Bian; Vasanta, Kalyana C.; O'Boyle, Michael; Baker, Mary C.; Nutter, Brian; Mitra, Sunanda

    2010-03-01

    Functional magnetic resonance imaging (fMRI) is used to model brain activation patterns associated with various perceptual and cognitive processes as reflected by the hemodynamic (BOLD) response. While many sensory and motor tasks are associated with relatively simple activation patterns in localized regions, higher-order cognitive tasks may produce activity in many different brain areas involving complex neural circuitry. We applied a recently proposed probabilistic independent component analysis technique (PICA) to determine the true dimensionality of the fMRI data and used EEG localization to identify the common activated patterns (mapped as Brodmann areas) associated with a complex cognitive task like analytic reasoning. Our preliminary study suggests that a hybrid GLM/PICA analysis may reveal additional regions of activation (beyond simple GLM) that are consistent with electroencephalography (EEG) source localization patterns.

  1. Active optics experiments. II - Measurement of mirror deformation by holographic method

    NASA Astrophysics Data System (ADS)

    Itoh, Noboru; Mikami, Izumi; Miyawaki, Keizou; Sasaki, Aki; Tabata, Masao

    An active optics experiment was performed to study the feasibility of using an active correction system for the Japanese National Large Telescope (Wilson, 1986). A thin mirror was deformed with an active support mechanism and the mirror surface was measured by a holographic method. The experiment is performed for several cases of excess force distributions assigned at the supporting points. The results show good agreement with predictions from FEM analysis.

  2. Battery-powered pulsed high density inductively coupled plasma source for pre-ionization in laboratory astrophysics experiments.

    PubMed

    Chaplin, Vernon H; Bellan, Paul M

    2015-07-01

    An electrically floating radiofrequency (RF) pre-ionization plasma source has been developed to enable neutral gas breakdown at lower pressures and to access new experimental regimes in the Caltech laboratory astrophysics experiments. The source uses a customized 13.56 MHz class D RF power amplifier that is powered by AA batteries, allowing it to safely float at 3-6 kV with the electrodes of the high voltage pulsed power experiments. The amplifier, which is capable of 3 kW output power in pulsed (<1 ms) operation, couples electrical energy to the plasma through an antenna external to the 1.1 cm radius discharge tube. By comparing the predictions of a global equilibrium discharge model with the measured scalings of plasma density with RF power input and axial magnetic field strength, we demonstrate that inductive coupling (rather than capacitive coupling or wave damping) is the dominant energy transfer mechanism. Peak ion densities exceeding 5 × 10(19) m(-3) in argon gas at 30 mTorr have been achieved with and without a background field. Installation of the pre-ionization source on a magnetohydrodynamically driven jet experiment reduced the breakdown time and jitter and allowed for the creation of hotter, faster argon plasma jets than was previously possible. PMID:26233382

  3. Measurement of the response of a Ga solar neutrino experiment to neutrinos from a {sup 37}Ar source

    SciTech Connect

    Abdurashitov, J.N.; Gavrin, V.N.; Girin, S.V.

    2006-04-15

    An intense source of {sup 37}Ar was produced by the (n,{alpha}) reaction on {sup 40}Ca by irradiating 330 kg of calcium oxide in the fast neutron breeder reactor at Zarechny, Russia. The {sup 37}Ar was released from the solid target by dissolution in acid, collected from this solution, purified, sealed into a small source, and brought to the Baksan Neutrino Observatory where it was used to irradiate 13 tonnes of gallium metal in the Russian-American gallium solar neutrino experiment SAGE. Ten exposures of the gallium to the source, whose initial strength was 409{+-}2kCi, were carried out during the period April to September 2004. The {sup 71}Ge produced by the reaction {sup 71}Ga({nu}{sub e},e{sup -}){sup 71}Ge was extracted, purified, and counted. The measured production rate was 11.0{sub -0.9}{sup +1.0} (stat){+-}0.6 (syst) atoms of {sup 71}Ge/d, which is 0.79{sub -0.10}{sup +0.09} of the theoretically calculated production rate. When all neutrino source experiments with gallium are considered together, there is an indication the theoretical cross section has been overestimated.

  4. Timeframe Dependent Fragment Ions Observed in In-Source Decay Experiments with β-Casein Using MALDI MS

    NASA Astrophysics Data System (ADS)

    Sekiya, Sadanori; Nagoshi, Keishiro; Iwamoto, Shinichi; Tanaka, Koichi; Takayama, Mitsuo

    2015-09-01

    The fragment ions observed with time-of-flight (TOF) and quadrupole ion trap (QIT) TOF mass spectrometers (MS) combined with matrix-assisted laser desorption/ionization in-source decay (MALDI-ISD) experiments of phosphorylated analytes β-casein and its model peptide were compared from the standpoint of the residence timeframe of analyte and fragment ions in the MALDI ion source and QIT cell. The QIT-TOF MS gave fragment c-, z'-, z-ANL, y-, and b-ions, and further degraded fragments originating from the loss of neutrals such as H2O, NH3, CH2O (from serine), C2H4O (from threonine), and H3PO4, whereas the TOF MS merely showed MALDI source-generated fragment c-, z'-, z-ANL, y-, and w-ions. The fragment ions observed in the QIT-TOF MS could be explained by the injection of the source-generated ions into the QIT cell or a cooperative effect of a little internal energy deposition, a long residence timeframe (140 ms) in the QIT cell, and specific amino acid effects on low-energy CID, whereas the source-generated fragments (c-, z'-, z-ANL, y-, and w-ions) could be a result of prompt radical-initiated fragmentation of hydrogen-abundant radical ions [M + H + H]+ and [M + H - H]- within the 53 ns timeframe, which corresponds to the delayed extraction time. The further degraded fragment b/y-ions produced in the QIT cell were confirmed by positive- and negative-ion low-energy CID experiments performed on the source-generated ions (c-, z'-, and y-ions). The loss of phosphoric acid (98 u) from analyte and fragment ions can be explained by a slow ergodic fragmentation independent of positive and negative charges.

  5. A low phase noise microwave source for atomic spin squeezing experiments in 87Rb

    NASA Astrophysics Data System (ADS)

    Chen, Zilong; Bohnet, Justin G.; Weiner, Joshua M.; Thompson, James K.

    2012-04-01

    We describe and characterize a simple, low cost, low phase noise microwave source that operates near 6.800 GHz for agile, coherent manipulation of ensembles of 87Rb. Low phase noise is achieved by directly multiplying a low phase noise 100 MHz crystal to 6.8 GHz using a nonlinear transmission line and filtering the output with custom band-pass filters. The fixed frequency signal is single sideband modulated with a direct digital synthesis frequency source to provide the desired phase, amplitude, and frequency control. Before modulation, the source has a single sideband phase noise near -140 dBc/Hz in the range of 10 kHz-1 MHz offset from the carrier frequency and -130 dBc/Hz after modulation. The resulting source is estimated to contribute added spin-noise variance 16 dB below the quantum projection noise level during quantum nondemolition measurements of the clock transition in an ensemble 7 × 105 87Rb atoms.

  6. Talker Identification across Source Mechanisms: Experiments with Laryngeal and Electrolarynx Speech

    ERIC Educational Resources Information Center

    Perrachione, Tyler K.; Stepp, Cara E.; Hillman, Robert E.; Wong, Patrick C. M.

    2014-01-01

    Purpose: The purpose of this study was to determine listeners' ability to learn talker identity from speech produced with an electrolarynx, explore source and filter differentiation in talker identification, and describe acoustic-phonetic changes associated with electrolarynx use. Method: Healthy adult control listeners learned to identify…

  7. A low phase noise microwave source for atomic spin squeezing experiments in {sup 87}Rb

    SciTech Connect

    Chen Zilong; Bohnet, Justin G.; Weiner, Joshua M.; Thompson, James K.

    2012-04-15

    We describe and characterize a simple, low cost, low phase noise microwave source that operates near 6.800 GHz for agile, coherent manipulation of ensembles of {sup 87}Rb. Low phase noise is achieved by directly multiplying a low phase noise 100 MHz crystal to 6.8 GHz using a nonlinear transmission line and filtering the output with custom band-pass filters. The fixed frequency signal is single sideband modulated with a direct digital synthesis frequency source to provide the desired phase, amplitude, and frequency control. Before modulation, the source has a single sideband phase noise near -140 dBc/Hz in the range of 10 kHz-1 MHz offset from the carrier frequency and -130 dBc/Hz after modulation. The resulting source is estimated to contribute added spin-noise variance 16 dB below the quantum projection noise level during quantum nondemolition measurements of the clock transition in an ensemble 7 x 10{sup 5} {sup 87}Rb atoms.

  8. A low phase noise microwave source for atomic spin squeezing experiments in 87Rb.

    PubMed

    Chen, Zilong; Bohnet, Justin G; Weiner, Joshua M; Thompson, James K

    2012-04-01

    We describe and characterize a simple, low cost, low phase noise microwave source that operates near 6.800 GHz for agile, coherent manipulation of ensembles of (87)Rb. Low phase noise is achieved by directly multiplying a low phase noise 100 MHz crystal to 6.8 GHz using a nonlinear transmission line and filtering the output with custom band-pass filters. The fixed frequency signal is single sideband modulated with a direct digital synthesis frequency source to provide the desired phase, amplitude, and frequency control. Before modulation, the source has a single sideband phase noise near -140 dBc/Hz in the range of 10 kHz-1 MHz offset from the carrier frequency and -130 dBc/Hz after modulation. The resulting source is estimated to contribute added spin-noise variance 16 dB below the quantum projection noise level during quantum nondemolition measurements of the clock transition in an ensemble 7 × 10(5) (87)Rb atoms. PMID:22559559

  9. Involving Software Engineering Students in Open Source Software Projects: Experiences from a Pilot Study

    ERIC Educational Resources Information Center

    Sowe, Sulayman K.; Stamelos, Ioannis G.

    2007-01-01

    Anecdotal and research evidences show that the Free and Open Source Software (F/OSS) development model has produced a paradigm shift in the way we develop, support, and distribute software. This shift is not only redefining the software industry but also the way we teach and learn in our software engineering (SE) courses. But for many universities…

  10. The ULTRA Experiment: A Supporting Activity for the Euso Project

    NASA Astrophysics Data System (ADS)

    Vallania, P.; Agnetta, G.; Assis, P.; Berat, C.; Biondo, B.; Brogueira, P.; Cappa, A.; Catalano, O.; D'Ali Staiti, G.; Espirito-Santo, M.C.; Fava, L.; Gabriele, M.; Galeotti, P.; Giarrusso, S.; Gugliotta, G.; Lebrun, D.; Mangano, A.; Melo, L.; Pimenta, M.; Pusso, F.; Saavedra, O.; Scarsi, P.; Silva, J.C.; Stassi, P.; Teyssier, D.; Tome, B.; Vallania, P.; Vigorito, C.

    2003-07-01

    The ULTRA experiment [4] has been designed in the framework of the EUSO project to measure the reflected/diffused signal produced by the EAS impacting on the Earth surface. EUSO will detect the EECRs measuring the fluorescent light produced by the interaction with the Earth atmosphere. With this method, the particle track can be measured together with its relative depth, ˇ but not its absolute position. Cerenkov light associated to the EAS is emitted in a narrow cone and hits the Earth surface, being partially absorb ed and partially diffused. This signal will give an absolute reference for the track, allowing the measurement of the shower maximum and making also easier the separation ˇ between neutrino and hadronic showers. Moreover, Cerenkov light can give an indep endent estimation of the shower energy if the reflectivity of the shower impinging surface is known. The ULTRA detector includes a UV optical device to ˇ collect the Cerenkov light diffused by various surfaces and an array of scintillators to detect, in coincidence, cosmic ray showers. First tests have been done last October in Mont-Cenis (France, 1970 m a.s.l.); next measurement campaign is scheduled for June 2003.

  11. Results of Skylab medical experiment M171: Metabolic activity

    NASA Technical Reports Server (NTRS)

    Michel, E. L.; Rummel, J. A.; Sawin, C. F.; Buderer, M. C.; Lem, J. D.

    1974-01-01

    The experiment was conducted to establish whether man's ability to perform mechanical work would be progressively altered as a result of exposure to the weightless environment of space flight. The Skylab crewmen exercised on a bicycle ergometer at workloads approximating 25, 50, and 75 percent of their maximum aerobic capacity. The physiological parameters monitored were respiratory gas exchange, blood pressure, and vectorcardiogram/heart rate. The results of these tests indicate that the crewmen had no significant decrement in their responses to exercise during their exposure to zero gravity. The results of the third manned Skylab mission (Skylab 4) are presented and a comparison is made of the overall results obtained from the three successively longer Skylab manned missions. The Skylab 4 crewmembers' 84-day in-flight responses to exercise were no worse and were probably better than the responses of the crewmen on the first two Skylab missions. Indications that exercise was an important contributing factor in maintaining this response are discussed.

  12. Investigating effectiveness of activated carbons of natural sources on various supercapacitors

    NASA Astrophysics Data System (ADS)

    Faisal, Md. Shahnewaz Sabit; Rahman, Muhammad M.; Asmatulu, Ramazan

    2016-04-01

    Activated carbon can be produced from natural sources, such as pistachio and acorn shells, which can be an inexpensive and sustainable sources of natural wastes for the energy storage devices, such as supercapacitors. The carbonaceous materials used in this study were carbonized at the temperatures of 700°C and 900°C after the stabilization process at 240°C for two hours. These shells showed approximately 60% carbon yield. Carbonized nutshells were chemically activated using1wt% potassium hydroxide (KOH). Activated carbon powders with polyvinylidene fluoride (PVdF) were used to construct carbon electrodes. A 1M of tetraethylammonium tetrafluoroborate (TEABF4) and propylene carbonate (PC) were used as electrolytes. Electrochemical techniques, such as cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were used for the characterization of the supercapacitors. Scanning electron microscopy (SEM) was used to inspect the surface texture of the activated carbons. Activated pistachio shells carbonized at 700°C showed more porous surface texture than those carbonized at 900°C. Effects of the carbonization temperatures were studied for their electrochemical characteristics. The shells carbonized at 700°C showed better electrochemical characteristics compared to those carbonized at 900°C. The test results provided about 27,083 μF/g specific capacitance at a scan rate of 10mV/s. This study showed promising results for using these activated carbons produced from the natural wastes for supercapacitor applications.

  13. Effect of source-separated urine storage on estrogenic activity detected using bioluminescent yeast Saccharomyces cerevisiae.

    PubMed

    Jaatinen, Sanna; Kivistö, Anniina; Palmroth, Marja R T; Karp, Matti

    2016-09-01

    The objective was to demonstrate that a microbial whole cell biosensor, bioluminescent yeast, Saccharomyces cerevisiae (BMAEREluc/ERα) can be applied to detect overall estrogenic activity from fresh and stored human urine. The use of source-separated urine in agriculture removes a human originated estrogen source from wastewater influents, subsequently enabling nutrient recycling. Estrogenic activity in urine should be diminished prior to urine usage in agriculture in order to prevent its migration to soil. A storage period of 6 months is required for hygienic reasons; therefore, estrogenic activity monitoring is of interest. The method measured cumulative female hormone-like activity. Calibration curves were prepared for estrone, 17β-estradiol, 17α- ethinylestradiol and estriol. Estrogen concentrations of 0.29-29,640 μg L(-1) were detectable while limit of detection corresponded to 0.28-35 μg L(-1) of estrogens. The yeast sensor responded well to fresh and stored urine and gave high signals corresponding to 0.38-3,804 μg L(-1) of estrogens in different urine samples. Estrogenic activity decreased during storage, but was still higher than in fresh urine implying insufficient storage length. The biosensor was suitable for monitoring hormonal activity in urine and can be used in screening anthropogenic estrogen-like compounds interacting with the receptor. PMID:26804108

  14. A new activated primary tank developed for recovering carbon source and its application.

    PubMed

    Jin, Pengkang; Wang, Xianbao; Zhang, Qionghua; Wang, Xiaochang; Ngo, Huu Hao; Yang, Lei

    2016-01-01

    A novel activated primary tank process (APT) was developed for recovering carbon source by fermentation and elutriation of primary sludge. The effects of solids retention time (SRT), elutriation intensity (G) and return sludge ratio (RSR) on this recovery were evaluated in a pilot scale reactor. Results indicated that SRT significantly influenced carbon source recovery, and mechanical elutriation could promote soluble COD (SCOD) and VFA yields. The optimal conditions of APT were SRT=5d, G=152s(-1) and RSR=10%, SCOD and VFA production were 57.0mg/L and 21.7mg/L. Particulate organic matter in sludge was converted into SCOD and VFAs as fermentative bacteria were significantly enriched in APT. Moreover, the APT process was applied in a wastewater treatment plant to solve the problem of insufficient carbon source. The outcomes demonstrated that influent SCOD of biological tank increased by 31.1%, which improved the efficiency of removing nitrogen and phosphorus. PMID:26562688

  15. Participating in Political Activities: Political Systems, Unit Three. Comparing Political Experiences, Experimental Edition.

    ERIC Educational Resources Information Center

    Gillespie, Judith A.; Patrick, John J.

    The third unit to the first-semester course, "Comparing Political Experiences," provides 16 activities to help 12th-grade students acquire in-depth knowledge of various kinds of political activities, such as decision making, leadership, communication, and participation. The activities and readings are divided into six sections which stress the…

  16. Fifth Grade Students' Experiences Participating in Active Gaming in Physical Education: The Persistence to Game

    ERIC Educational Resources Information Center

    Hansen, Lisa; Sanders, Steve

    2010-01-01

    Although video games are often associated with sedentary behaviors, active gaming is a new genre that requires children to become physically active while playing the games. In this study six fifth grade students' experiences participating in active gaming in eight-week physical education classes were explored. Qualitative methods of interviews,…

  17. Linear halogen bulb as a powerful light source for physics experiments

    NASA Astrophysics Data System (ADS)

    Bochníček, Zdeněk

    2015-11-01

    The paper describes the usage of a conventional lamp equipped with a linear halogen bulb for physics experiments. The irradiance gain and limitation of spectral resolution are treated in detail theoretically and verified experimentally. The analysis shows that, in comparison with a standard bulb and slit arrangement, the linear bulb can increase irradiance of the spectrum image by an order of magnitude without a significant loss of spectral resolution in comparable experimental arrangements. Some concrete examples of experiments with a white light spectrum and diffraction are presented.

  18. A liquid jet setup for x-ray scattering experiments on complex liquids at free-electron laser sources

    NASA Astrophysics Data System (ADS)

    Steinke, I.; Walther, M.; Lehmkühler, F.; Wochner, P.; Valerio, J.; Mager, R.; Schroer, M. A.; Lee, S.; Roseker, W.; Jain, A.; Sikorski, M.; Song, S.; Hartmann, R.; Huth, M.; Strüder, L.; Sprung, M.; Robert, A.; Fuoss, P. H.; Stephenson, G. B.; Grübel, G.

    2016-06-01

    In this paper we describe a setup for x-ray scattering experiments on complex fluids using a liquid jet. The setup supports Small and Wide Angle X-ray Scattering (SAXS/WAXS) geometries. The jet is formed by a gas-dynamic virtual nozzle (GDVN) allowing for diameters ranging between 1 μm and 20 μm at a jet length of several hundred μm. To control jet properties such as jet length, diameter, or flow rate, the instrument is equipped with several diagnostic tools. Three microscopes are installed to quantify jet dimensions and stability in situ. The setup has been used at several beamlines performing both SAXS and WAXS experiments. As a typical example we show an experiment on a colloidal dispersion in a liquid jet at the X-ray Correlation Spectroscopy instrument at the Linac Coherent Light Source free-electron laser.

  19. A liquid jet setup for x-ray scattering experiments on complex liquids at free-electron laser sources.

    PubMed

    Steinke, I; Walther, M; Lehmkühler, F; Wochner, P; Valerio, J; Mager, R; Schroer, M A; Lee, S; Roseker, W; Jain, A; Sikorski, M; Song, S; Hartmann, R; Huth, M; Strüder, L; Sprung, M; Robert, A; Fuoss, P H; Stephenson, G B; Grübel, G

    2016-06-01

    In this paper we describe a setup for x-ray scattering experiments on complex fluids using a liquid jet. The setup supports Small and Wide Angle X-ray Scattering (SAXS/WAXS) geometries. The jet is formed by a gas-dynamic virtual nozzle (GDVN) allowing for diameters ranging between 1 μm and 20 μm at a jet length of several hundred μm. To control jet properties such as jet length, diameter, or flow rate, the instrument is equipped with several diagnostic tools. Three microscopes are installed to quantify jet dimensions and stability in situ. The setup has been used at several beamlines performing both SAXS and WAXS experiments. As a typical example we show an experiment on a colloidal dispersion in a liquid jet at the X-ray Correlation Spectroscopy instrument at the Linac Coherent Light Source free-electron laser. PMID:27370468

  20. Scanning L Band Active Passive Validation Experiment 2013

    NASA Astrophysics Data System (ADS)

    Joseph, A. T.; Kim, E. J.; Faulkner, T.; Patel, H.; Cosh, M. H.

    2014-12-01

    SLAP (Scanning L-band Active Passive) comprises of a fully polarimetric L-band radiometer and fully polarimetric L-band radar with a shared antenna. SLAP is designed to be compatible with several aircrafts; specifically, C-23, Twin Otter, P-3, and C-130. SLAP is designed for simplicity, accuracy, & reliability. It leverages, as much as possible, existing instruments, hardware, and software in order to minimize cost, time, and risk.The SLAP airborne/ground campaign is designed to conduct flight testing and ground truth for the airborne instrument. The campaign took place the third week of December 2013 in Eastern Shore, MD. SLAP contributes to the NASA's core mission because of its ability to serve as an airborne simulator for the SMAP (Soil Moisture Active Passive) satellite mission, one of NASA's flagship missions scheduled to launch in January 2015. A 3-day aircraft validation campaign was conducted where the new SLAP instrument flew three separate days over the proposed sampling region. The study area is a mixed agriculture and forest site located about 1 hour east of Washington, DC on the Eastern Shore (of the Chesapeake Bay). This region is located on the Delmarva Peninsula. The advantages of the selected site are: (1) Site was used before in previous field campaign (SMAPVEX08) (2) ARS HRSL has some established sampling sites within region (3) Dynamic variation in land cover (4) Variety of plant structures and densities. The goal of this campaign was to fly the instrument over the proposed site before a rain event, then have 2 other flights after the rain event to capture a dry down. In conjunction with the aircraft, there was in-situ ground sampling. Ground observations were collected concurrent with aircraft flights. These included soil moisture, soil temperature, surface temperature, surface roughness and vegetation parameters. Forest sites were monitored with small temporary networks of in situ sensors installed prior to the first flight. Soil moisture was