Science.gov

Sample records for active transition metal

  1. Methane activation on supported transition metal catalysts

    NASA Astrophysics Data System (ADS)

    Carstens, Jason Ned

    At present, there is considerable interest in utilizing methane more efficiently as both a fuel source and as a starting material for the production of other, more valuable products. However, methane is a very stable molecule with strong C-H bonds that are difficult to break. This makes methane combustion or the formation of carbon-carbon bonds quite difficult. The present work focuses on the use of supported transition metal catalysts as a means of activating methane (i.e. breaking C-H bonds) at low temperatures to produce valuable products or energy. The conversion of methane into higher hydrocarbons. A low temperature (<750 K), direct process to effectively convert methane into higher hydrocarbons would be quite desirable. Such a process is thermodynamically feasible if the reaction is broken up into two separate steps. The first step is the adsorption of methane onto a transition metal catalyst at temperatures above about 600 K to produce a surface carbon species. The second step is a low temperature (<373 K) hydrogenation to convert the carbon species into higher hydrocarbons. T. Koerts et al. have pursued this approach by dissociatively absorbing methane onto silica supported transition metal catalysts at temperatures ranging between 573 K and 773 K. The result was a surface carbonaceous species and hydrogen. In the second step, the carbonaceous intermediates produced small alkanes upon hydrogenation around 373 K. A maximum yield to higher hydrocarbons of 13% was obtained on a ruthenium catalyst. The present study was conducted to further investigate the nature of the carbonaceous species reported by Koerts. Methane combustion. This investigation was conducted in an effort to better understand the mechanism of methane combustion on Pd catalysts. In the first part of this study, temperature programmed reduction (TPR) was used to investigate the oxidation and reduction dynamics of a 10 wt% Pd/ZrOsb2 catalyst used for methane combustion. TPR experiments indicate

  2. Transition metals

    PubMed Central

    Rodrigo-Moreno, Ana; Poschenrieder, Charlotte; Shabala, Sergey

    2013-01-01

    Transition metals such as Iron (Fe) and Copper (Cu) are essential for plant cell development. At the same time, due their capability to generate hydroxyl radicals they can be potentially toxic to plant metabolism. Recent works on hydroxyl-radical activation of ion transporters suggest that hydroxyl radicals generated by transition metals could play an important role in plant growth and adaptation to imbalanced environments. In this mini-review, the relation between transition metals uptake and utilization and oxidative stress-activated ion transport in plant cells is analyzed, and a new model depicting both apoplastic and cytosolic mode of ROS signaling to plasma membrane transporters is suggested. PMID:23333964

  3. How absorbed hydrogen affects the catalytic activity of transition metals.

    PubMed

    Aleksandrov, Hristiyan A; Kozlov, Sergey M; Schauermann, Swetlana; Vayssilov, Georgi N; Neyman, Konstantin M

    2014-12-01

    Heterogeneous catalysis is commonly governed by surface active sites. Yet, areas just below the surface can also influence catalytic activity, for instance, when fragmentation products of catalytic feeds penetrate into catalysts. In particular, H absorbed below the surface is required for certain hydrogenation reactions on metals. Herein, we show that a sufficient concentration of subsurface hydrogen, H(sub) , may either significantly increase or decrease the bond energy and the reactivity of the adsorbed hydrogen, H(ad) , depending on the metal. We predict a representative reaction, ethyl hydrogenation, to speed up on Pd and Pt, but to slow down on Ni and Rh in the presence of H(sub) , especially on metal nanoparticles. The identified effects of subsurface H on surface reactivity are indispensable for an atomistic understanding of hydrogenation processes on transition metals and interactions of hydrogen with metals in general.

  4. Microalloying of transition metal silicides by mechanical activation and field-activated reaction

    DOEpatents

    Munir, Zuhair A.; Woolman, Joseph N.; Petrovic, John J.

    2003-09-02

    Alloys of transition metal suicides that contain one or more alloying elements are fabricated by a two-stage process involving mechanical activation as the first stage and densification and field-activated reaction as the second stage. Mechanical activation, preferably performed by high-energy planetary milling, results in the incorporation of atoms of the alloying element(s) into the crystal lattice of the transition metal, while the densification and field-activated reaction, preferably performed by spark plasma sintering, result in the formation of the alloyed transition metal silicide. Among the many advantages of the process are its ability to accommodate materials that are incompatible in other alloying methods.

  5. DNA nuclease activity of Rev-coupled transition metal chelates.

    PubMed

    Joyner, Jeff C; Keuper, Kevin D; Cowan, J A

    2012-06-07

    Artificial nucleases containing Rev-coupled metal chelates based on combinations of the transition metals Fe(2+), Co(2+), Ni(2+), and Cu(2+) and the chelators DOTA, DTPA, EDTA, NTA, tripeptide GGH, and tetrapeptide KGHK have been tested for DNA nuclease activity. Originally designed to target reactive transition metal chelates (M-chelates) to the HIV-1 Rev response element mRNA, attachment to the arginine-rich Rev peptide also increases DNA-binding affinity for the attached M-chelates. Apparent K(D) values ranging from 1.7 to 3.6 µM base pairs for binding of supercoiled pUC19 plasmid DNA by Ni-chelate-Rev complexes were observed, as a result of electrostatic attraction between the positively-charged Rev peptide and negatively-charged DNA. Attachment of M-chelates to the Rev peptide resulted in enhancements of DNA nuclease activity ranging from 1-fold (no enhancement) to at least 13-fold (for Cu-DTPA-Rev), for the rate of DNA nicking, with second order rate constants for conversion of DNA(supercoiled) to DNA(nicked) up to 6 × 10(6) M(-1) min(-1), and for conversion of DNA(nicked) to DNA(linear) up to 1 × 10(5) M(-1) min(-1). Freifelder-Trumbo analysis and the ratios of linearization and nicking rate constants (k(lin)/k(nick)) revealed concerted mechanisms for nicking and subsequent linearization of plasmid DNA for all of the Rev-coupled M-chelates, consistent with higher DNA residency times for the Rev-coupled M-chelates. Observed rates for Rev-coupled M-chelates were less skewed by differing DNA-binding affinities than for M-chelates lacking Rev, as a result of the narrow range of DNA-binding affinities observed, and therefore relationships between DNA nuclease activity and other catalyst properties, such as coordination unsaturation, the ability to consume ascorbic acid and generate diffusible radicals, and the identity of the metal center, are now clearly illustrated in light of the similar DNA-binding affinities of all M-chelate-Rev complexes. This work

  6. Transition Metals Catalyzed Element-Cyano Bonds Activations

    PubMed Central

    Wang, Rui; Falck, John R.

    2014-01-01

    Cyano group as a versatile functionalized intermediate has been explored for several decades, as it readily transfers to many useful functionalization groups such as amine, amide, acid, etc., which make it possess high popularization and use value in organic synthesis. Reactions involved with element-cyano bond cleavage can provide not only a new cyano group but also a freshly functionalized skeleton in one-pot, consequently making it of high importance. The highlights reviewed herein include H-CN, Si-CN, C-CN, B-CN, Sn-CN, Ge-CN, S-CN, Halo-CN, N-CN, and O-CN bonds cleavages and will summarize progress in such an important research area. This review article will focus on transition metal catalyzed reactions involving element-cyano bond activation. PMID:25558119

  7. Transition metal activation and functionalization of carbon-hydrogen bonds

    SciTech Connect

    Jones, W.D.

    1992-06-01

    We are investigating the fundamental thermodynamic and kinetic factors that influence carbon-hydrogen bond activation at homogeneous transition metal centers and the conversion of hydrocarbons into functionalized products of potential use to the chemical industry. Advances have been made in both understanding the interactions of hydrocarbons with metals and in the functionalization of hydrocarbons. We have found that RhCl(PR{sub 3}){sub 2}(CNR) complexes can catalyze the insertion of isonitriles into the C-H bonds or arenes upon photolysis. The mechanism of these reactions was found to proceed by way of initial phosphine dissociation, followed by C-H activation and isonitrile insertion. We have also examined reactions of a series of arenes with (C{sub 5}Me{sub 5})Rh(PMe{sub 3})PhH and begun to map out the kinetic and thermodynamic preferences for arene coordination. The effects of resonance, specifically the differences in the Hueckel energies of the bound vs free ligand, are now believed to fully control the C-H activation/{eta}{sup 2}-coordination equilibria. We have begun to examine the reactions of rhodium isonitrile pyrazolylborates for alkane and arene C-H bond activation. A new, labile, carbodiimide precursor has been developed for these studies. We have completed studies of the reactions of (C{sub 5}Me{sub 5})Rh(PMe{sub 3})H{sub 2} with D{sub 2} and PMe{sub 3} that indicate that both {eta}{sup 5} {yields} {eta}{sup 3} ring slippage and metal to ring hydride migration occur more facilely than thermal reductive elimination of H{sub 2}. We have examined the reactions of heterocycles with (C{sub 5}Me{sub 5})Rh(PMe{sub 3})PhH and found that pyrrole and furan undergo C-H or N-H activation. Thiophene, however, undergoes C-S bond oxidative addition, and the mechanism of activation has been shown to proceed through sulfur coordination prior to C-S insertion.

  8. Activated phosphors having matrices of yttrium-transition metal compound

    DOEpatents

    De Kalb, E.L.; Fassel, V.A.

    1975-07-01

    A method is described for preparing a phosphor composition containing a lanthanide activator element with a host matrix having a transition element as a major component. The host matrix is composed of certain rare earth phosphates or vanadates such as YPO$sub 4$ with a portion of the rare earth replaced with one or more of the transition elements. On x-ray or other electromagnetic excitation, trace lanthanide impurities or additives within the phosphor are spectrometrically determined from their characteristic luminescence. (auth)

  9. Ligational behavior of Schiff bases towards transition metal ion and metalation effect on their antibacterial activity

    NASA Astrophysics Data System (ADS)

    Devi, Jai; Batra, Nisha; Malhotra, Rajesh

    2012-11-01

    New Schiff bases pyrazine-2-carboxylicacid (phenyl-pyridin-2-yl-methylene)-hydrazide (Hpch-bp) HL1 and pyrazine-2-carboxylicacid (pyridin-2-ylmethylene)-hydrazide (Hpch-pc) HL2 derived from condensation of pyrazine carboxylic hydrazide (Hpch) with 2-benzoyl pyridine (bp) or pyridine 2-carbaldehyde (pc) and their transition metal complexes of type ML(1-2)2 have been synthesized, where M = Mn(II), Co(II), Ni(II), Cu(II) and Zn(II). Characterization of ligands and their metal complexes was carried out by elemental analysis, conductimetric studies, magnetic susceptibility, spectroscopic techniques (IR, UV-VIS, NMR, ESR, Mass) and thermogravimetric analysis. The physico-chemical studies revealed octahedral geometry or distorted octahedral geometry around metal ion. These azomethine Schiff base ligands acted as tridentate ? coordinating through carbonyl, azomethine and pyridine nitrogen present in the ligand. The thermodynamic and thermal properties of the complexes have been investigated and it was observed on the basis of these studies that thermal stability of complexes follows the order Mn < Zn < Cu < Co < Ni. The ligands and their complexes were tested for in vitro antibacterial activity at different concentrations against bacteria viz. Gram positive Bacillus subtilis, Micrococcus luteus and Gram negative Pseudomonas aeruginosa, Pseudomonas mendocina. A marked enhancement in biocidal activity of the ligands under similar experimental conditions was observed as a consequence of coordination with metal ions. The trend of growth inhibition in the complexes was found to be in the order: Cu > Mn > Ni > Co > Zn.

  10. The highly synergistic, broad spectrum, antibacterial activity of organic acids and transition metals

    PubMed Central

    Zhitnitsky, Daniel; Rose, Jessica; Lewinson, Oded

    2017-01-01

    For millennia, transition metals have been exploited to inhibit bacterial growth. We report here the potentiation of the anti-bacterial activity of transition metals by organic acids. Strong synergy between low, non-toxic concentrations of transition metals and organic acids was observed with up to ~1000-fold higher inhibitory effect on bacterial growth. We show that organic acids shuttle transition metals through the permeability barrier of the bacterial membrane, leading to increased influx of transition metals into bacterial cells. We demonstrate that this synergy can be effectively used to inhibit the growth of a broad range of plant and human bacterial pathogens, and suggest that a revision of food preservation and crop protection strategies may be in order. These findings bear significant biomedical, agricultural, financial and environmental opportunities. PMID:28294164

  11. Ligational behavior of Schiff bases towards transition metal ion and metalation effect on their antibacterial activity.

    PubMed

    Devi, Jai; Batra, Nisha; Malhotra, Rajesh

    2012-11-01

    New Schiff bases pyrazine-2-carboxylicacid (phenyl-pyridin-2-yl-methylene)-hydrazide (Hpch-bp) HL(1) and pyrazine-2-carboxylicacid (pyridin-2-ylmethylene)-hydrazide (Hpch-pc) HL(2) derived from condensation of pyrazine carboxylic hydrazide (Hpch) with 2-benzoyl pyridine (bp) or pyridine 2-carbaldehyde (pc) and their transition metal complexes of type ML((1-2)2) have been synthesized, where M=Mn(II), Co(II), Ni(II), Cu(II) and Zn(II). Characterization of ligands and their metal complexes was carried out by elemental analysis, conductimetric studies, magnetic susceptibility, spectroscopic techniques (IR, UV-VIS, NMR, ESR, Mass) and thermogravimetric analysis. The physico-chemical studies revealed octahedral geometry or distorted octahedral geometry around metal ion. These azomethine Schiff base ligands acted as tridentate coordinating through carbonyl, azomethine and pyridine nitrogen present in the ligand. The thermodynamic and thermal properties of the complexes have been investigated and it was observed on the basis of these studies that thermal stability of complexes follows the order Mnactivity at different concentrations against bacteria viz. Gram positive Bacillus subtilis, Micrococcus luteus and Gram negative Pseudomonas aeruginosa, Pseudomonas mendocina. A marked enhancement in biocidal activity of the ligands under similar experimental conditions was observed as a consequence of coordination with metal ions. The trend of growth inhibition in the complexes was found to be in the order: Cu>Mn>Ni>Co>Zn.

  12. Activation of methane by transition metal-substituted aluminophosphate molecular sieves

    DOEpatents

    Iton, Lennox E.; Maroni, Victor A.

    1991-01-01

    Aluminophosphate molecular sieves substituted with cobalt, manganese or iron and having the AlPO.sub.4 -34 or AlPO.sub.4 -5, or related AlPO.sub.4 structure activate methane starting at approximately 350.degree. C. Between 400.degree. and 500.degree. C. and at methane pressures .ltoreq.1 atmosphere the rate of methane conversion increases steadily with typical conversion efficiencies at 500.degree. C. approaching 50% and selectivity to the production of C.sub.2+ hydrocarbons approaching 100%. The activation mechanism is based on reduction of the transition metal(III) form of the molecular sieve to the transition metal(II) form with accompanying oxidative dehydrogenation of the methane. Reoxidation of the - transition metal(II) form to the transition metal(III) form can be done either chemically (e.g., using O.sub.2) or electrochemically.

  13. Gas-phase activation of methane by ligated transition-metal cations

    PubMed Central

    Schröder, Detlef; Schwarz, Helmut

    2008-01-01

    Motivated by the search for ways of a more efficient usage of the large, unexploited resources of methane, recent progress in the gas-phase activation of methane by ligated transition-metal ions is discussed. Mass spectrometric experiments demonstrate that the ligands can crucially influence both reactivity and selectivity of transition-metal cations in bond-activation processes, and the most reactive species derive from combinations of transition metals with the electronegative elements fluorine, oxygen, and chlorine. Furthermore, the collected knowledge about intramolecular kinetic isotope effects associated with the activation of C–H(D) bonds of methane can be used to distinguish the nature of the bond activation as a mere hydrogen-abstraction, a metal-assisted mechanism or more complex reactions such as formation of insertion intermediates or σ-bond metathesis. PMID:18955709

  14. Asymmetric photoredox transition-metal catalysis activated by visible light

    NASA Astrophysics Data System (ADS)

    Huo, Haohua; Shen, Xiaodong; Wang, Chuanyong; Zhang, Lilu; Röse, Philipp; Chen, Liang-An; Harms, Klaus; Marsch, Michael; Hilt, Gerhard; Meggers, Eric

    2014-11-01

    Asymmetric catalysis is seen as one of the most economical strategies to satisfy the growing demand for enantiomerically pure small molecules in the fine chemical and pharmaceutical industries. And visible light has been recognized as an environmentally friendly and sustainable form of energy for triggering chemical transformations and catalytic chemical processes. For these reasons, visible-light-driven catalytic asymmetric chemistry is a subject of enormous current interest. Photoredox catalysis provides the opportunity to generate highly reactive radical ion intermediates with often unusual or unconventional reactivities under surprisingly mild reaction conditions. In such systems, photoactivated sensitizers initiate a single electron transfer from (or to) a closed-shell organic molecule to produce radical cations or radical anions whose reactivities are then exploited for interesting or unusual chemical transformations. However, the high reactivity of photoexcited substrates, intermediate radical ions or radicals, and the low activation barriers for follow-up reactions provide significant hurdles for the development of efficient catalytic photochemical processes that work under stereochemical control and provide chiral molecules in an asymmetric fashion. Here we report a highly efficient asymmetric catalyst that uses visible light for the necessary molecular activation, thereby combining asymmetric catalysis and photocatalysis. We show that a chiral iridium complex can serve as a sensitizer for photoredox catalysis and at the same time provide very effective asymmetric induction for the enantioselective alkylation of 2-acyl imidazoles. This new asymmetric photoredox catalyst, in which the metal centre simultaneously serves as the exclusive source of chirality, the catalytically active Lewis acid centre, and the photoredox centre, offers new opportunities for the `green' synthesis of non-racemic chiral molecules.

  15. Dinitrogen activation in sterically-hindered three-coordinate transition metal complexes.

    PubMed

    Christian, Gemma; Driver, Jenni; Stranger, Robert

    2003-01-01

    Dinuclear metal systems based on sterically-hindered, three-coordinate transition metal complexes of the type ML3 where the ancillary ligands L comprise bulky organic substituents, hold great promise synthetically for the activation and scission of small, multiply-bonded molecules such as N2, NO and N2O. In this study we have employed density functional methods to identify the metal/ligand combinations which achieve optimum activation and/or cleavage of N2. Strong pi donor ligands such as NH2 and OH are found to produce the greatest level of activation based on N-N bond lengths in the intermediate dimer complex, L3Mo(mu-N2)MoL3, whereas systems containing the weak or non-pi donor ligands NH3, PH3, OH2 and SH2 are found to be thermodynamically unfavourable for N2 activation. In the case of the Mo-NH2 and W-NH2 systems, a fragment bonding analysis reveals that the orientation of the amide ligands around the metal is important in determining both the spin state and the extent of dinitrogen activation in the intermediate dimer. For both systems, an intermediate dimer structure where one of the NH2 ligands on each metal is rotated 90 degrees relative to the other ligands, is more activated than the structure in which the NH2 ligands are trigonally disposed around the metals. The level of activation is found to be very sensitive to the electronic configuration of the metal with d3 metal ions delivering the best activation along any one transition series. In particular, strong activation or cleavage of N2 was calculated for the third row d3 metals systems involving Ta(II), W(III) and Re(IV), with the level of activation decreasing as the nuclear charge on the metal increases. This trend in activation reflects the size of the valence 5d orbitals and consequently, the capacity of the metal to back donate into the dinitrogen pi* orbitals.

  16. An improved d-band model of the catalytic activity of magnetic transition metal surfaces

    PubMed Central

    Bhattacharjee, Satadeep; Waghmare, Umesh V.; Lee, Seung-Cheol

    2016-01-01

    The d-band center model of Hammer and Nørskov is widely used in understanding and predicting catalytic activity on transition metal (TM) surfaces. Here, we demonstrate that this model is inadequate for capturing the complete catalytic activity of the magnetically polarized TM surfaces and propose its generalization. We validate the generalized model through comparison of adsorption energies of the NH3 molecule on the surfaces of 3d TMs (V, Cr, Mn, Fe, Co, Ni, Cu and Zn) determined with spin-polarized density functional theory (DFT)-based methods with the predictions of our model. Compared to the conventional d-band model, where the nature of the metal-adsorbate interaction is entirely determined through the energy and the occupation of the d-band center, we emphasize that for the surfaces with high spin polarization, the metal-adsorbate system can be stabilized through a competition of the spin-dependent metal-adsorbate interactions. PMID:27808100

  17. An improved d-band model of the catalytic activity of magnetic transition metal surfaces

    NASA Astrophysics Data System (ADS)

    Bhattacharjee, Satadeep; Waghmare, Umesh V.; Lee, Seung-Cheol

    2016-11-01

    The d-band center model of Hammer and Nørskov is widely used in understanding and predicting catalytic activity on transition metal (TM) surfaces. Here, we demonstrate that this model is inadequate for capturing the complete catalytic activity of the magnetically polarized TM surfaces and propose its generalization. We validate the generalized model through comparison of adsorption energies of the NH3 molecule on the surfaces of 3d TMs (V, Cr, Mn, Fe, Co, Ni, Cu and Zn) determined with spin-polarized density functional theory (DFT)-based methods with the predictions of our model. Compared to the conventional d-band model, where the nature of the metal-adsorbate interaction is entirely determined through the energy and the occupation of the d-band center, we emphasize that for the surfaces with high spin polarization, the metal-adsorbate system can be stabilized through a competition of the spin-dependent metal-adsorbate interactions.

  18. Metal-mediated dihydrogen activation. What determines the transition-state geometry?

    PubMed

    Devarajan, Deepa; Ess, Daniel H

    2012-06-04

    Density functional theory and absolutely localized molecular orbital energy decomposition analysis calculations were used to calculate and analyze dihydrogen activation transition states and reaction pathways. Analysis of a variety of transition-metal complexes with d(0), d(6), d(8), and d(10) orbital occupation with a diverse range of metal ligands reveals that for transition states, akin to dihydrogen σ complexes, there is a continuum of activated H-H bond lengths that can be classified as "dihydrogen" (0.8-1.0 Å), "stretched or elongated" (1.0-1.2 Å), and "compressed dihydride" (1.2-1.6 Å). These calculations also quantitatively for the first time reveal that the extent to which H(2) is activated in the transition-structure geometry depends on back-bonding orbital interactions and not forward-bonding orbital interactions. This is true regardless of the mechanism or whether the metal ligand complex acts as an electrophile, ambiphile, or nucleophile toward dihydrogen.

  19. Immobilized transition metals stimulate contact activation and drive factor XII-mediated coagulation

    PubMed Central

    Mutch, N.J.; Waters, E.K.; Morrissey, J. H.

    2012-01-01

    Summary Background Upon contact with an appropriate surface, factor XII (FXII) undergoes autoactivation or cleavage by kallikrein. Zn2+ is known to facilitate binding of FXII and the cofactor, high molecular weight kininogen (HK), to anionic surfaces. Objectives To investigate whether transition metals immobilized on liposome surfaces can initiate coagulation via the contact pathway. Methods & Results Liposomes containing a metal ion-chelating lipid (DOGS-NTA) were prepared by membrane extrusion (20% DOGS-NTA, 40% phosphatidylcholine, 10% phosphatidylserine, and 30% phosphatidylethanolamine). Ni2+ immobilized on such liposomes accelerated clotting in normal, but not FXI- or FXII-deficient plasma. Results were comparable to a commercial aPTT reagent. Charging such liposomes with other transition metals revealed differences in their procoagulant capacity, with Ni2+> Cu2+> Co2+ and Zn2+. Plasma could be depleted of FXI, FXII and HK by adsorption with Ni2+-containing beads, resulting in delayed clot times. Consistent with this, FXI, FXII and HK bound to immobilized Ni2+ or Cu2+ with high affinity as determined by surface plasmon resonance. In the presence of Ni2+-bearing liposomes, Km and kcat values derived for autoactivation of FXII and prekallikrein, as well as for activation of FXII by kallikrein or prekallikrein by FXIIa, were similar to literature values in the presence of dextran sulfate. Conclusions Immobilized Ni2+ and Cu2+ bind FXII, FXI and HK with high affinity and stimulate activation of the contact pathway, driving FXII-mediated coagulation. Activation of the contact system by immobilized transition metals may have implications during pathogenic infection or in individuals exposed to high levels of pollution. PMID:22905925

  20. Antimicrobial activity of transition metal acid MoO(3) prevents microbial growth on material surfaces.

    PubMed

    Zollfrank, Cordt; Gutbrod, Kai; Wechsler, Peter; Guggenbichler, Josef Peter

    2012-01-01

    Serious infectious complications of patients in healthcare settings are often transmitted by materials and devices colonised by microorganisms (nosocomial infections). Current strategies to generate material surfaces with an antimicrobial activity suffer from the consumption of the antimicrobial agent and emerging multidrug-resistant pathogens amongst others. Consequently, materials surfaces exhibiting a permanent antimicrobial activity without the risk of generating resistant microorganisms are desirable. This publication reports on the extraordinary efficient antimicrobial properties of transition metal acids such as molybdic acid (H(2)MoO(4)), which is based on molybdenum trioxide (MoO(3)). The modification of various materials (e.g. polymers, metals) with MoO(3) particles or sol-gel derived coatings showed that the modified materials surfaces were practically free of microorganisms six hours after contamination with infectious agents. The antimicrobial activity is based on the formation of an acidic surface deteriorating cell growth and proliferation. The application of transition metal acids as antimicrobial surface agents is an innovative approach to prevent the dissemination of microorganisms in healthcare units and public environments.

  1. Oligocyclopentadienyl transition metal complexes

    SciTech Connect

    de Azevedo, Cristina G.; Vollhardt, K. Peter C.

    2002-01-18

    Synthesis, characterization, and reactivity studies of oligocyclopentadienyl transition metal complexes, namely those of fulvalene, tercyclopentadienyl, quatercyclopentadienyl, and pentacyclopentadienyl(cyclopentadienyl) are the subject of this account. Thermal-, photo-, and redox chemistries of homo- and heteropolynuclear complexes are described.

  2. Synthesis and Characterization of Layered Double Hydroxides Containing Optically Active Transition Metal Ion

    NASA Astrophysics Data System (ADS)

    Tyagi, S. B.; Kharkwal, Aneeta; Nitu; Kharkwal, Mamta; Sharma, Raghunandan

    2017-01-01

    The acetate intercalated layered double hydroxides of Zn and Mn, have been synthesized by chimie douce method. The materials were characterized by XRD, TGA, CHN, IR, XPS, SEM-EDX and UV-visible spectroscopy. The photoluminescence properties was also studied. The optical properties of layered hydroxides are active transition metal ion dependent, particularly d1-10 system plays an important role. Simultaneously the role of host - guest orientation has been considered the basis of photoluminescence. Acetate ion can be exchanged with iodide and sulphate ions. The decomposed product resulted the pure phase Mn doped zinc oxide are also reported.

  3. Reduction of transition metals by human (THP-1) monocytes is enhanced by activators of protein kinase C.

    PubMed

    Wood, J L; Graham, A

    1999-11-01

    Macrophages oxidize low density lipoprotein (LDL) by enzymatic and non-enzymatic mechanisms; however, it is evident that macrophage reduction of transition metals can accelerate LDL oxidation in vitro, and possibly in vivo. Distinct cellular pathways contribute to this process, including trans-plasma membrane electron transport (TPMET), and production of free thiols or superoxide. Here, we explore the role of protein kinase C (PKC) in regulating transition metal reduction by each of these redox-active pathways, in human (THP-1) monocytes. We demonstrate that PKC agonists and/or inhibitors modulate reduction of transition metals by monocytes: both thiol-independent (direct) and thiol-dependent (indirect) pathways for transition metal reduction are enhanced by PKC activation, suggesting a potential strategy for therapeutic intervention.

  4. Transition metal sulfide loaded catalyst

    DOEpatents

    Maroni, V.A.; Iton, L.E.; Pasterczyk, J.W.; Winterer, M.; Krause, T.R.

    1994-04-26

    A zeolite-based catalyst is described for activation and conversion of methane. A zeolite support includes a transition metal (Mo, Cr or W) sulfide disposed within the micropores of the zeolite. The catalyst allows activation and conversion of methane to C[sub 2]+ hydrocarbons in a reducing atmosphere, thereby avoiding formation of oxides of carbon.

  5. Transition metal sulfide loaded catalyst

    DOEpatents

    Maroni, Victor A.; Iton, Lennox E.; Pasterczyk, James W.; Winterer, Markus; Krause, Theodore R.

    1994-01-01

    A zeolite based catalyst for activation and conversion of methane. A zeolite support includes a transition metal (Mo, Cr or W) sulfide disposed within the micropores of the zeolite. The catalyst allows activation and conversion of methane to C.sub.2 + hydrocarbons in a reducing atmosphere, thereby avoiding formation of oxides of carbon.

  6. Spectroscopic studies and biological activity of some transition metal complexes of unusual Schiff base

    NASA Astrophysics Data System (ADS)

    Abu Al-Nasr, Ahmad K.; Ramadan, Ramadan M.

    2013-03-01

    Unusual Schiff base ligand, 4-ethanimidoyl-6-[(1E)-N-(2-hydroxy-4-methylphenyl)ethanimidoyl]benzene-1,3-diol, L, was synthesized via catalytic process involving the interaction of some metal ions with a macrocyclic Schiff base (MSB). The transition metal derivatives [ML(H2O)4](NO3)3, M = Cr(III) and Fe(III), [NiL(H2O)4](NO3)2, [ML(H2O)2](NO3)2, M = Zn(II) and Cd(II), [Cl2Pd(μ-Cl)2PdL], [PtL(Cl)2] and [PtL(Cl)4] were also synthesized from the corresponding metal species with L. The Schiff bases and complexes were characterized by elemental analysis, mass spectrometry, IR and 1H NMR spectroscopy. The crystal structure of L was determined by X-ray analysis. The spectroscopic studies revealed a variety of structure arrangements for the complexes. The biological activities of L and metal complexes against the Escherchia coli as Gram-negative bacteria and Staphylococcus aureus as Gram-positive bacteria, and the two fungus Aspergillus flavus and Candida albicans were screened. The cytotoxicity of [PtL(Cl)2] complex, a cis-platin analogous, was checked as an antitumor agent on two breast cancer cell lines (MCF7 and T47D) and human liver carcinoma cell line (HepG2).

  7. Superconductivity in transition metals.

    PubMed

    Slocombe, Daniel R; Kuznetsov, Vladimir L; Grochala, Wojciech; Williams, Robert J P; Edwards, Peter P

    2015-03-13

    A qualitative account of the occurrence and magnitude of superconductivity in the transition metals is presented, with a primary emphasis on elements of the first row. Correlations of the important parameters of the Bardeen-Cooper-Schrieffer theory of superconductivity are highlighted with respect to the number of d-shell electrons per atom of the transition elements. The relation between the systematics of superconductivity in the transition metals and the periodic table high-lights the importance of short-range or chemical bonding on the remarkable natural phenomenon of superconductivity in the chemical elements. A relationship between superconductivity and lattice instability appears naturally as a balance and competition between localized covalent bonding and so-called broken covalency, which favours d-electron delocalization and superconductivity. In this manner, the systematics of superconductivity and various other physical properties of the transition elements are related and unified.

  8. Transition from stress-driven to thermally activated stress relaxation in metallic glasses

    NASA Astrophysics Data System (ADS)

    Qiao, J. C.; Wang, Yun-Jiang; Zhao, L. Z.; Dai, L. H.; Crespo, D.; Pelletier, J. M.; Keer, L. M.; Yao, Y.

    2016-09-01

    The short-range ordered but long-range disordered structure of metallic glasses yields strong structural and dynamic heterogeneities. Stress relaxation is a technique to trace the evolution of stress in response to a fixed strain, which reflects the dynamic features phenomenologically described by the Kohlrausch-Williams-Watts (KWW) equation. The KWW equation describes a broad distribution of relaxation times with a small number of empirical parameters, but it does not arise from a particular physically motivated mechanistic picture. Here we report an anomalous two-stage stress relaxation behavior in a Cu46Zr46Al8 metallic glass over a wide temperature range and generalize the findings in other compositions. Thermodynamic analysis identifies two categories of processes: a fast stress-driven event with large activation volume and a slow thermally activated event with small activation volume, which synthetically dominates the stress relaxation dynamics. Discrete analyses rationalize the transition mechanism induced by stress and explain the anomalous variation of the KWW characteristic time with temperature. Atomistic simulations reveal that the stress-driven event involves virtually instantaneous short-range atomic rearrangement, while the thermally activated event is the percolation of the fast event accommodated by the long-range atomic diffusion. The insights may clarify the underlying physical mechanisms behind the phenomenological description and shed light on correlating the hierarchical dynamics and structural heterogeneity of amorphous solids.

  9. Transition-metal-doped ZnO nanoparticles: synthesis, characterization and photocatalytic activity under UV light.

    PubMed

    Saleh, Rosari; Djaja, Nadia Febiana

    2014-09-15

    ZnO nanoparticles doped with transition metals (Mn and Co) were prepared by a co-precipitation method. The synthesized nanoparticles were characterized using X-ray diffraction, scanning electron microscopy, energy dispersive X-rays, Fourier transform infrared spectroscopy, electron spin resonance spectroscopy and diffuse reflectance spectroscopy. The photocatalytic activities of the transition-metal-doped ZnO nanoparticles were evaluated in the degradation of methyl orange under UV irradiation. ZnO nanoparticles doped with 12 at.% of Mn and Co ions exhibited the maximum photodegradation efficiency. The experiment also demonstrated that the photodegradation efficiency of Mn-doped ZnO nanoparticles was higher than that of Co-doped ZnO nanoparticles. These results indicate that charge trapping states due to the doping were the decisive factor rather than the average particle size and energy gap. Moreover the effect of pH values on the degradation efficiency was discussed in the photocatalytic experiments using 12 at.% Mn- and Co-doped ZnO nanoparticles.

  10. Transition-metal-doped ZnO nanoparticles: Synthesis, characterization and photocatalytic activity under UV light

    NASA Astrophysics Data System (ADS)

    Saleh, Rosari; Djaja, Nadia Febiana

    2014-09-01

    ZnO nanoparticles doped with transition metals (Mn and Co) were prepared by a co-precipitation method. The synthesized nanoparticles were characterized using X-ray diffraction, scanning electron microscopy, energy dispersive X-rays, Fourier transform infrared spectroscopy, electron spin resonance spectroscopy and diffuse reflectance spectroscopy. The photocatalytic activities of the transition-metal-doped ZnO nanoparticles were evaluated in the degradation of methyl orange under UV irradiation. ZnO nanoparticles doped with 12 at.% of Mn and Co ions exhibited the maximum photodegradation efficiency. The experiment also demonstrated that the photodegradation efficiency of Mn-doped ZnO nanoparticles was higher than that of Co-doped ZnO nanoparticles. These results indicate that charge trapping states due to the doping were the decisive factor rather than the average particle size and energy gap. Moreover the effect of pH values on the degradation efficiency was discussed in the photocatalytic experiments using 12 at.% Mn- and Co-doped ZnO nanoparticles.

  11. Transition Metal Switchable Mirror

    SciTech Connect

    2009-01-01

    The switchable-mirrors technology was developed by Tom Richardson and Jonathan Slack of Berkeley Lab's Environmental Energy Technologies Division. By using transition metals rather than the rare earth metals used in the first metal-hydride switchable mirrors, Richardson and Slack were able to lower the cost and simplify the manufacturing process. Energy performance is improved as well, because the new windows can reflect or transmit both visible and infrared light. Besides windows for offices and homes, possible applications include automobile sunroofs, signs and displays, aircraft windows, and spacecraft. More information at: http://windows.lbl.gov/materials/chromogenics/default.htm

  12. Transition Metal Switchable Mirror

    SciTech Connect

    2009-08-21

    The switchable-mirrors technology was developed by Tom Richardson and Jonathan Slack of Berkeley Lab's Environmental Energy Technologies Division. By using transition metals rather than the rare earth metals used in the first metal-hydride switchable mirrors, Richardson and Slack were able to lower the cost and simplify the manufacturing process. Energy performance is improved as well, because the new windows can reflect or transmit both visible and infrared light. Besides windows for offices and homes, possible applications include automobile sunroofs, signs and displays, aircraft windows, and spacecraft.

  13. Transition Metal Switchable Mirror

    ScienceCinema

    None

    2016-07-12

    The switchable-mirrors technology was developed by Tom Richardson and Jonathan Slack of Berkeley Lab's Environmental Energy Technologies Division. By using transition metals rather than the rare earth metals used in the first metal-hydride switchable mirrors, Richardson and Slack were able to lower the cost and simplify the manufacturing process. Energy performance is improved as well, because the new windows can reflect or transmit both visible and infrared light. Besides windows for offices and homes, possible applications include automobile sunroofs, signs and displays, aircraft windows, and spacecraft. More information at: http://windows.lbl.gov/materials/chromogenics/default.htm

  14. Transition Metal Switchable Mirror

    ScienceCinema

    None

    2016-07-12

    The switchable-mirrors technology was developed by Tom Richardson and Jonathan Slack of Berkeley Lab's Environmental Energy Technologies Division. By using transition metals rather than the rare earth metals used in the first metal-hydride switchable mirrors, Richardson and Slack were able to lower the cost and simplify the manufacturing process. Energy performance is improved as well, because the new windows can reflect or transmit both visible and infrared light. Besides windows for offices and homes, possible applications include automobile sunroofs, signs and displays, aircraft windows, and spacecraft.

  15. Transition Metal-Promoted V2CO2 (MXenes): A New and Highly Active Catalyst for Hydrogen Evolution Reaction.

    PubMed

    Ling, Chongyi; Shi, Li; Ouyang, Yixin; Chen, Qian; Wang, Jinlan

    2016-11-01

    Developing alternatives to precious Pt for hydrogen production from water splitting is central to the area of renewable energy. This work predicts extremely high catalytic activity of transition metal (Fe, Co, and Ni) promoted two-dimensional MXenes, fully oxidized vanadium carbides (V2CO2), for hydrogen evolution reaction (HER). The first-principle calculations show that the introduction of transition metal can greatly weaken the strong binding between hydrogen and oxygen and engineer the hydrogen adsorption free energy to the optimal value ≈0 eV by choosing the suitable type and coverage of the promoters as well as the active sites. Strain engineering on the performance of transition metal promoted V2CO2 further reveals that the excellent HER activities can maintain well while those poor ones can be modulated to be highly active. This study provides new possibilities for cost-effective alternatives to Pt in HER and for the application of 2D MXenes.

  16. Methane Activation by 5 d Transition Metals: Energetics, Mechanisms, and Periodic Trends.

    PubMed

    Armentrout, Peter B

    2017-01-01

    Although it has been known for almost three decades that several 5d transition-metal cations will activate methane at room temperature, a more detailed examination of these reactions across the periodic table has only recently been completed. In this Minireview, we compare and contrast studies of the kinetic energy dependence of these reactions as studied using guided-ion-beam tandem mass spectrometry. Thermochemistry for the various products observed (MH(+) , MH2(+) , MC(+) , MCH(+) , MCH2(+) , and MCH3(+) ) are collected and periodic trends evaluated and discussed. The mechanisms for the reactions as elucidated by synergistic quantum chemical calculations are also reviewed. Recent spectroscopic evidence for the structures of the MCH2(+) dehydrogenation products are discussed as well.

  17. Characterization and electrochemical activities of nanostructured transition metal nitrides as cathode materials for lithium sulfur batteries

    NASA Astrophysics Data System (ADS)

    Mosavati, Negar; Salley, Steven O.; Ng, K. Y. Simon

    2017-02-01

    The Lithium Sulfur (Li-S) battery system is one of the most promising candidates for electric vehicle applications due to its higher energy density when compared to conventional lithium ion batteries. However, there are some challenges facing Li-S battery commercialization, such as: low active material utilization, high self-discharge rate, and high rate of capacity fade. In this work, a series of transition metal nitrides: Tungsten nitride (WN), Molybdenum Nitride (Mo2N), and Vanadium Nitride (VN) was investigated as cathode materials for lithium polysulfide conversion reactions. Capacities of 697, 569, and 264 mAh g-1 were observed for WN, Mo2N, VN, respectively, with 8 mg cm-2 loading, after 100 cycles at a 0.1 C rate. WN higher electrochemical performance may be attributed to a strong reversible reaction between nitrides and polysulfide, which retains the sulfur species on the electrode surface, and minimizes the active material and surface area loss. X-ray photoelectron spectroscopy (XPS) analysis was performed to gain a better understanding of the mechanism underlying each metal nitride redox reactions.

  18. Transition-state metal aryl bond stability determines regioselectivity in palladium acetate mediated C-H bond activation of heteroarenes.

    PubMed

    Petit, Alban; Flygare, Josh; Miller, Alex T; Winkel, Gerrit; Ess, Daniel H

    2012-07-20

    Density functional calculations reveal that the stability of developing metal aryl bonds in Pd(II)-acetate C-H activation transition states determines regioselectivity in arene and heteroarene compounds. This kinetic-thermodynamic connection explains the general preference for activation of the strongest C-H bond and provides the possibility for regioselectivity prediction.

  19. Binding and Activation of N2O at Transition Metal Centers: Recent Mechanistic Insights

    PubMed Central

    Tolman, William B.

    2010-01-01

    No laughing matter, nitrous oxide’s role in stratospheric ozone depletion and as a greenhouse gas has stimulated great interest in developing and understanding its decomposition, particularly through the use of transition metal promoters. Recent advances in our understanding of the reaction pathways for N2O reduction by metal ions in the gas phase and in heterogeneous, homogeneous, and biological catalytic systems have provided provocative ideas about the structure and properties of metal-N2O adducts and derived intermediates. These ideas are likely to inform efforts to design more effective catalysts for N2O remediation. PMID:20058284

  20. Photochemistry of Transition Metal Hydrides.

    PubMed

    Perutz, Robin N; Procacci, Barbara

    2016-08-10

    Photochemical reactivity associated with metal-hydrogen bonds is widespread among metal hydride complexes and has played a critical part in opening up C-H bond activation. It has been exploited to design different types of photocatalytic reactions and to obtain NMR spectra of dilute solutions with a single pulse of an NMR spectrometer. Because photolysis can be performed on fast time scales and at low temperature, metal-hydride photochemistry has enabled determination of the molecular structure and rates of reaction of highly reactive intermediates. We identify five characteristic photoprocesses of metal monohydride complexes associated with the M-H bond, of which the most widespread are M-H homolysis and R-H reductive elimination. For metal dihydride complexes, the dominant photoprocess is reductive elimination of H2. Dihydrogen complexes typically lose H2 photochemically. The majority of photochemical reactions are likely to be dissociative, but hydride complexes may be designed with equilibrated excited states that undergo different photochemical reactions, including proton transfer or hydride transfer. The photochemical mechanisms of a few reactions have been analyzed by computational methods, including quantum dynamics. A section on specialist methods (time-resolved spectroscopy, matrix isolation, NMR, and computational methods) and a survey of transition metal hydride photochemistry organized by transition metal group complete the Review.

  1. Selenophene transition metal complexes

    SciTech Connect

    White, Carter James

    1994-07-27

    This research shows that selenophene transition metal complexes have a chemistry that is similar to their thiophene analogs. Selenophene coordination has been demonstrated and confirmed by molecular structure in both the η5- and the η1(Se)-coordination modes. The reaction chemistry of selenophene complexes closely resembles that of the analogous thiophene complexes. One major difference, however, is that selenophene is a better donor ligand than thiophene making the selenophene complexes more stable than the corresponding thiophene complexes. The 77Se NMR chemical shift values for selenophene complexes fall within distinct regions primarily depending on the coordination mode of the selenophene ligand. In the final paper, the C-H bond activation of η1(S)-bound thiophenes, η1(S)-benzothiophene and η1(Se)-bound selenophenes has been demonstrated. The deprotonation and rearrangement of the η1(E)-bound ligand to the carbon bound L-yl complex readily occurs in the presence of base. Reprotonation with a strong acid gives a carbene complex that is unreactive towards nucleophilic attack at the carbene carbon and is stable towards exposure to air. The molecular structure of [Cp(NO)(PPh3)Re(2-benzothioenylcarbene)]O3SCF3 was determined and contains a Re-C bond with substantial double bond character. Methyl substitution for the thienylcarbene or selenylcarbene gives a carbene that rearranges thermally to give back the η1(E)-bound complex. Based on these model reactions, a new mechanism for the H/D exchange of thiophene over the hydrodesulfurization catalyst has been proposed.

  2. Transition Metal Ions in Zeolites: Coordination and activation of O2

    PubMed Central

    Smeets, Pieter J.; Woertink, Julia S.; Sels, Bert F.; Solomon, Edward I.; Schoonheydt, Robert A.

    2010-01-01

    Zeolites containing transition metal ions (TMI) often show promising activity as heterogeneous catalysts in pollution abatement and selective oxidation reactions. In this paper, two aspects of research on the TMI Cu, Co and Fe in zeolites are discussed: (i) coordination to the lattice and (ii) activated oxygen species. At low loading, TMI preferably occupy exchange sites in six-membered oxygen rings (6MR) where the TMI preferentially coordinate with the oxygen atoms of Al tetrahedra. High TMI loadings result in a variety of TMI species formed at the zeolite surface. Removal of the extra-lattice oxygens during high temperature pretreatments can result in auto-reduction. Oxidation of reduced TMI sites often results in the formation of highly reactive oxygen species. In Cu-ZSM-5, calcination with O2 results in the formation of a species, which was found to be a crucial intermediate in both the direct decomposition of NO and N2O and the selective oxidation of methane into methanol. An activated oxygen species, called α-oxygen, is formed in Fe-ZSM5 and reported to be the active site in the partial oxidation of methane and benzene into methanol and phenol, respectively. However, this reactive α-oxygen can only be formed with N2O, not with O2. O2 activated Co intermediates in Faujasite (FAU) zeolites can selectively oxidize α-pinene and epoxidize styrene. In Co-FAU, CoIII superoxo and peroxo complexes are suggested to be the active cores, whereas in Cu and Fe-ZSM-5 various monomeric and dimeric sites have been proposed, but no consensus has been obtained. Very recently, the active site in Cu-ZSM-5 was identified as a bent [Cu-O-Cu]2+ core (Proc. Natl. Acad. Sci. USA 2009, 106, 18908-18913). Overall, O2 activation depends on the interplay of structural factors such as type of zeolite, size of the channels and cages and chemical factors such as Si/Al ratio and the nature, charge and distribution of the charge balancing cations. The presence of several different TMI sites

  3. New transition metal ion complexes with benzimidazole-5-carboxylic acid hydrazides with antitumor activity.

    PubMed

    Galal, Shadia A; Hegab, Khaled H; Kassab, Ahmed S; Rodriguez, Mireya L; Kerwin, Sean M; el-Khamry, Abdel-Mo'men A; el-Diwani, Hoda I

    2009-04-01

    Metal complexes of 2-methyl-1H-benzimidazole-5-carboxylic acid hydrazide (4a; L(1)) and its Schiff base 2-methyl-N-(propan-2-ylidene)-1H-benzimidazole-5-carbohydrazide (5a; L(2)) with transition metal ions e.g., copper, silver, nickel, iron and manganese were prepared. The complexes formed were 1:1 or 1:2 M:L complexes and have the structural formulae [Cu(L(1))Cl(H(2)O)]Cl x 3 H(2)O (6), [Ag(L(1))NO(3)(H(2)O)] (7), [Ni(L(1))Cl(2)(H(2)O)(2)] x H(2)O (8), [Fe(L(1))Cl(3)(H(2)O)] x 3 H(2)O (9) and [Mn(L(1))(2)Cl(H(2)O)]Cl x 3 H(2)O (10) for ligand L(1), and [Cu(L(2))Cl(2)(H(2)O)(2)] x H(2)O (11), [Ag(L(2))(2)]NO(3) x H(2)O (12), [Ni(L(2))(2)Cl(2)] x 5 H(2)O (13), [Fe(L(2))(2)Cl(2)]Cl x 2 H(2)O (14) and [Mn(L(2))Cl(2)(H(2)O)(2)] x H(2)O (15) for ligand L(2). The antitumor activity of the synthesized compounds has been studied. The silver complex 7 was found to display cytotoxicity (IC(50)=2 microM) against both human lung cancer cell line A549 and human breast cancer cell line MCF-7.

  4. New First Order Raman-active Modes in Few Layered Transition Metal Dichalcogenides

    PubMed Central

    Terrones, H.; Corro, E. Del; Feng, S.; Poumirol, J. M.; Rhodes, D.; Smirnov, D.; Pradhan, N. R.; Lin, Z.; Nguyen, M. A. T.; Elías, A. L.; Mallouk, T. E.; Balicas, L.; Pimenta, M. A.; Terrones, M.

    2014-01-01

    Although the main Raman features of semiconducting transition metal dichalcogenides are well known for the monolayer and bulk, there are important differences exhibited by few layered systems which have not been fully addressed. WSe2 samples were synthesized and ab-initio calculations carried out. We calculated phonon dispersions and Raman-active modes in layered systems: WSe2, MoSe2, WS2 and MoS2 ranging from monolayers to five-layers and the bulk. First, we confirmed that as the number of layers increase, the E′, E″ and E2g modes shift to lower frequencies, and the A′1 and A1g modes shift to higher frequencies. Second, new high frequency first order A′1 and A1g modes appear, explaining recently reported experimental data for WSe2, MoSe2 and MoS2. Third, splitting of modes around A′1 and A1g is found which explains those observed in MoSe2. Finally, exterior and interior layers possess different vibrational frequencies. Therefore, it is now possible to precisely identify few-layered STMD. PMID:24572993

  5. Contribution of transition metals in the reactive oxygen species activity of PM emissions from retrofitted heavy-duty vehicles

    NASA Astrophysics Data System (ADS)

    Verma, Vishal; Shafer, Martin M.; Schauer, James J.; Sioutas, Constantinos

    2010-12-01

    We assessed the contribution of water-soluble transition metals to the reactive oxygen species (ROS) activity of diesel exhaust particles (DEPs) from four heavy-duty vehicles in five retrofitted configurations (V-SCRT, Z-SCRT, DPX, hybrid, and school bus). A heavy-duty truck without any control device served as the baseline vehicle. Particles were collected from all vehicle-configurations on a chassis dynamometer under three driving conditions: cruise (80 km h -1), transient UDDS, and idle. A sensitive macrophage-based in vitro assay was used to determine the ROS activity of collected particles. The contribution of water-soluble transition metals in the measured activity was quantified by their removal using a Chelex ® complexation method. The study demonstrates that despite an increase in the intrinsic ROS activity (per mass basis) of exhaust PM with use of most control technologies, the overall ROS activity (expressed per km or per h) was substantially reduced for retrofitted configurations compared to the baseline vehicle. Chelex treatment of DEPs water extracts removed a substantial (≥70%) and fairly consistent fraction of the ROS activity, which ascertains the dominant role of water-soluble metals in PM-induced cellular oxidative stress. However, relatively lower removal of the activity in few vehicle-configurations (V-SCRT, DPX and school bus idle), despite a large aggregate metals removal, indicated that not all species were associated with the measured activity. A univariate regression analysis identified several transition metals (Fe, Cr, Co and Mn) as significantly correlated ( R > 0.60; p < 0.05) with the ROS activity. Multivariate linear regression model incorporating Fe, Cr and Co explained 90% of variability in ROS levels, with Fe accounting for the highest (84%) fraction of the variance.

  6. Increased photocatalytic activity of TiO2 mesoporous microspheres from codoping with transition metals and nitrogen

    DOE PAGES

    Mathis, John E.; Lieffers, Justin J.; Mitra, Chandrima; ...

    2015-11-06

    The composition of anatase TiO2 was modified by codoping using combinations of a transition metal and nitrogen in order to increase its photocatalytic activity and extend it performance in the visible region of the electromagnetic spectrum. The transition metals (Mn, Co, Ni, Cu) were added during the hydrothermal preparation of mesoporous TiO2 particles, and the nitrogen was introduced by post-annealing in flowing ammonia gas at high temperature. The samples were analyzed by SEM, XRD, BET, inductively-coupled plasma spectroscopy, and diffuse reflectance UV-vis spectroscopy. The photocatalytic activity was assessed by observing the change in methylene blue concentrations under both UV-vis andmore » visible-only light irradiation. As a result, the photocatalytic activity of the (Mn,N), (Co,N), (Cu,N), and Ni,N) codoped TiO2 was significantly enhanced relative to (N) TiO2.« less

  7. Increased photocatalytic activity of TiO2 mesoporous microspheres from codoping with transition metals and nitrogen

    SciTech Connect

    Mathis, John E.; Lieffers, Justin J.; Mitra, Chandrima; Reboredo, Fernando A.; Bi, Z.; Bridges, Craig A.; Kidder, Michelle K.; Paranthaman, Mariappan Parans

    2015-11-06

    The composition of anatase TiO2 was modified by codoping using combinations of a transition metal and nitrogen in order to increase its photocatalytic activity and extend it performance in the visible region of the electromagnetic spectrum. The transition metals (Mn, Co, Ni, Cu) were added during the hydrothermal preparation of mesoporous TiO2 particles, and the nitrogen was introduced by post-annealing in flowing ammonia gas at high temperature. The samples were analyzed by SEM, XRD, BET, inductively-coupled plasma spectroscopy, and diffuse reflectance UV-vis spectroscopy. The photocatalytic activity was assessed by observing the change in methylene blue concentrations under both UV-vis and visible-only light irradiation. As a result, the photocatalytic activity of the (Mn,N), (Co,N), (Cu,N), and Ni,N) codoped TiO2 was significantly enhanced relative to (N) TiO2.

  8. Spectral, XRD, SEM and biological activities of transition metal complexes of polydentate ligands containing thiazole moiety

    NASA Astrophysics Data System (ADS)

    Neelakantan, M. A.; Marriappan, S. S.; Dharmaraja, J.; Jeyakumar, T.; Muthukumaran, K.

    2008-11-01

    Metal complexes of o-vanillidene-2-aminobenzothiazole have been prepared and characterized by elemental and spectral (vibrational, electronic, 1H NMR and EPR) data as well as magnetic susceptibility measurements and thermo gravimetric analysis (TG/DTA). The low molar conductance values reveal the non-electrolytic nature of these complexes. The elemental analysis suggests that the stoichiometry to be 1:2 (metal:ligand). Magnetic susceptibility data coupled with electronic spectra suggest that two ligands coordinate to each metal atom by phenolic oxygen and imino nitrogen to form high spin octahedral complex with Co(II), Mn(II) and Ni(II). The fifth and sixth position of metal ion is satisfied with water molecules. The thermal behaviour (TG/DTA) of the synthesised complexes shows that the complexes loss water molecules in the first step followed by decomposition of the ligand. Spin Hamiltonian parameters predict a distorted tetrahedral geometry for the copper complex. XRD and SEM analysis provide the crystalline nature and the morphology of the metal complexes. The in vitro biological activity of the metal chelates is tested against the Gram positive bacteria ( Bacillus amyloliquifacians) and gram negative bacteria ( Pseudomonas species), fungus ( Aspergillus niger) and yeast ( Sacchromyces cereviaceae). Most of the metal chelates exhibited higher biological activities.

  9. Synthesis, physico-chemical characterization and antimicrobial activities of 3-methoxysalicylaldehyde-2-aminobenzoylhydrazone and its transition metal complexes

    NASA Astrophysics Data System (ADS)

    Badiger, Dayananda S.; Hunoor, Rekha S.; Patil, Basavaraj R.; Vadavi, Ramesh S.; Mangannavar, Chandrashekhar V.; Muchchandi, Iranna S.; Gudasi, Kalagouda B.

    2012-07-01

    The transition metal complexes of 3-methoxysalicylaldehyde-2-aminobenzhydrazone (H2L) were synthesized and characterized by various spectroscopic (IR, NMR, UV-Vis, mass), thermal and other physicochemical methods. The ligand acts both in monobasic as well as dibasic manner and coordinates in tridentate fashion with carbonyl oxygen, azomethine nitrogen and phenolic oxygen via deprotonation except in Cu(II) complex where the ligand coordinates via enolization and deprotonation of amide proton. An octahedral geometry was assigned for Mn(II), Co(II), Ni(II) and Zn(II) complexes and square planar for Cu(II) complex. The ligand and its metal complexes have been screened for their in vitro antimicrobial activities using serial dilution method. Metal complexes in general have exhibited better antibacterial and antifungal activity than the free ligand. The Cu(II) complex exhibited highest antimicrobial activity among the compounds tested.

  10. Bivalent transition metal complexes of cetirizine: Spectroscopic, equilibrium studies and biological activity

    NASA Astrophysics Data System (ADS)

    El-Sherif, Ahmed A.; Shoukry, Mohamed M.; Abobakr, Lamis O.

    2013-08-01

    Metal complexes of cetirizineṡ2HCl (CTZ = 2-[2-[4-[(4-chlorophenyl)phenyl methyl]piperazine-1-yl]-ethoxy]acetic acid, dihydrochloride have been prepared and characterized by elemental analyses, IR, solid reflectance, magnetic moment, molar conductance, and UV-Vis spectra. The analytical data of the complexes show the formation of 1:2 [M:L] ratio, where M represents Ni(II), Co(II) and Cu(II) ions, while L represents the deprotonated CTZ ligand. IR spectra show that CTZ is coordinated to the metal ions in a monodentate manner through carboxylate-O atom. Protonation equilibria of CTZ and its metal complexation by some divalent metal ions were determined in aqueous solution at constant ionic strength (0.1 M NaCl) using an automatic potentiometric technique. Thermodynamic parameters for the protonation equilibria of CTZ were calculated and discussed. The stability order of M(II)-CTZ complexes were found to obey Mn2+ < Co2+ < Ni2+ < Cu2+, in accordance with the Irving-Williams order. The concentration distribution of the complexes in solution is evaluated as a function of pH. The CTZ ligand and its metal complexes were screened for their biological activity against bacterial species (Bacillus subtillis RCMB 010067, Staphylococcus aureus RCMB 010028, Pseudomonas aeuroginosa RCMB 010043, and Escherichia coli RCMB 010052) and fungi as (Aspergillus flavus RCMB 02568, Pencicillium italicum RCMB 03924, Candida albicans RCMB 05031 and Geotricum candidum RCMB 05097). The activity data show that the metal complexes have antibacterial and antifungal activity more than the parent CTZ ligand against one or more bacterial or fungi species. MIC was evaluated for the isolated complexes.

  11. Bivalent transition metal complexes of cetirizine: spectroscopic, equilibrium studies and biological activity.

    PubMed

    El-Sherif, Ahmed A; Shoukry, Mohamed M; Abobakr, Lamis O

    2013-08-01

    Metal complexes of cetirizine·2HCl (CTZ=2-[2-[4-[(4-chlorophenyl)phenyl methyl]piperazine-1-yl]-ethoxy]acetic acid, dihydrochloride have been prepared and characterized by elemental analyses, IR, solid reflectance, magnetic moment, molar conductance, and UV-Vis spectra. The analytical data of the complexes show the formation of 1:2 [M:L] ratio, where M represents Ni(II), Co(II) and Cu(II) ions, while L represents the deprotonated CTZ ligand. IR spectra show that CTZ is coordinated to the metal ions in a monodentate manner through carboxylate-O atom. Protonation equilibria of CTZ and its metal complexation by some divalent metal ions were determined in aqueous solution at constant ionic strength (0.1 M NaCl) using an automatic potentiometric technique. Thermodynamic parameters for the protonation equilibria of CTZ were calculated and discussed. The stability order of M(II)-CTZ complexes were found to obey Mn(2+)metal complexes were screened for their biological activity against bacterial species (Bacillus subtillis RCMB 010067, Staphylococcus aureus RCMB 010028, Pseudomonas aeuroginosa RCMB 010043, and Escherichia coli RCMB 010052) and fungi as (Aspergillus flavus RCMB 02568, Pencicillium italicum RCMB 03924, Candida albicans RCMB 05031 and Geotricum candidum RCMB 05097). The activity data show that the metal complexes have antibacterial and antifungal activity more than the parent CTZ ligand against one or more bacterial or fungi species. MIC was evaluated for the isolated complexes.

  12. Electrical Conductivity in Transition Metals

    ERIC Educational Resources Information Center

    Talbot, Christopher; Vickneson, Kishanda

    2013-01-01

    The aim of this "Science Note" is to describe how to test the electron-sea model to determine whether it accurately predicts relative electrical conductivity for first-row transition metals. In the electron-sea model, a metal crystal is viewed as a three-dimensional array of metal cations immersed in a sea of delocalised valence…

  13. A series of transition and non-transition metal complexes from a N 4O 2 hexadentate Schiff base ligand: Synthesis, spectroscopic characterization and efficient antimicrobial activities

    NASA Astrophysics Data System (ADS)

    Sarkar, Saikat; Dey, Kamalendu

    2010-11-01

    Some transition and non-transition metal complexes of the hexadentate N 4O 2 donor Schiff base ligand 1,8- N-bis(3-carboxy)disalicylidene-3,6-diazaoctane-1,8-diamine, abbreviated to H 4fsatrien, have been synthesized. All the 14 metal complexes have been fully characterized with the help of elemental analyses, molecular weights, molar conductance values, magnetic moments and spectroscopic (UV-Vis, IR, NMR, ESR) data. The analytical data helped to elucidate the structures of the metal complexes. The Schiff base, H 4fsatrien, is found to act as a dibasic hexadentate ligand using N 2N 2O 2 donor set of atoms (leaving the COOH group uncoordinated) leading to an octahedral geometry for the complexes around all the metal ions except VO 2+ and UO 22+. However, surprisingly the same ligand functions as a neutral hexadentate and neutral tetradentate one towards UO 22+ and VO 2+, respectively. In case of divalent metal complexes they have the general formula [M(H 2fsatrien)] (where M stands for Cu, Co, Hg and Zn); for trivalent metal complexes it is [M(H 2fsatrien)]X· nH 2O (where M stands for Cr, Mn, Fe, Co and X stands for CH 3COO, Cl, NO 3, ClO 4) and for the complexes of VO 2+ and UO 22+, [M(H 4fsatrien)]Y (where M = VO and Y = SO 4; M = UO 2 and Y = 2 NO 3). The Schiff base ligand and most of the complexes have been screened in vitro to judge their antibacterial ( Escherichia coli and Staphylococcus aureus) and antifungal ( Aspergillus niger and Pencillium chrysogenum) activities.

  14. Exploring the DNA binding mode of transition metal based biologically active compounds

    NASA Astrophysics Data System (ADS)

    Raman, N.; Sobha, S.

    2012-01-01

    Few novel 4-aminoantipyrine derived Schiff bases and their metal complexes were synthesized and characterized. Their structural features and other properties were deduced from the elemental analysis, magnetic susceptibility and molar conductivity as well as from mass, IR, UV-vis, 1H NMR and EPR spectral studies. The binding of the complexes with CT-DNA was analyzed by electronic absorption spectroscopy, viscosity measurement, and cyclic voltammetry. The interaction of the metal complexes with DNA was also studied by molecular modeling with special reference to docking. The experimental and docking results revealed that the complexes have the ability of interaction with DNA of minor groove binding mode. The intrinsic binding constants ( Kb) of the complexes with CT-DNA were found out which show that they are minor groove binders. Gel electrophoresis assay demonstrated the ability of the complexes to cleave the pUC19 DNA in the presence of AH 2 (ascorbic acid). Moreover, the oxidative cleavage studies using distamycin revealed the minor groove binding for the newly synthesized 4-aminoantipyrine derived Schiff bases and their metal complexes. Evaluation of antibacterial activity of the complexes against Staphylococcus aureus, Pseudomonas aeruginosa, Escherichia coli, Staphylococcus epidermidis, and Klebsiella pneumoniae exhibited that the complexes have potent biocidal activity than the free ligands.

  15. Exploring the DNA binding mode of transition metal based biologically active compounds.

    PubMed

    Raman, N; Sobha, S

    2012-01-01

    Few novel 4-aminoantipyrine derived Schiff bases and their metal complexes were synthesized and characterized. Their structural features and other properties were deduced from the elemental analysis, magnetic susceptibility and molar conductivity as well as from mass, IR, UV-vis, (1)H NMR and EPR spectral studies. The binding of the complexes with CT-DNA was analyzed by electronic absorption spectroscopy, viscosity measurement, and cyclic voltammetry. The interaction of the metal complexes with DNA was also studied by molecular modeling with special reference to docking. The experimental and docking results revealed that the complexes have the ability of interaction with DNA of minor groove binding mode. The intrinsic binding constants (K(b)) of the complexes with CT-DNA were found out which show that they are minor groove binders. Gel electrophoresis assay demonstrated the ability of the complexes to cleave the pUC19 DNA in the presence of AH(2) (ascorbic acid). Moreover, the oxidative cleavage studies using distamycin revealed the minor groove binding for the newly synthesized 4-aminoantipyrine derived Schiff bases and their metal complexes. Evaluation of antibacterial activity of the complexes against Staphylococcus aureus, Pseudomonas aeruginosa, Escherichia coli, Staphylococcus epidermidis, and Klebsiella pneumoniae exhibited that the complexes have potent biocidal activity than the free ligands.

  16. Synthesis, characterization and antifungal activities of 3d-transition metal complexes of 1-acetylpiperazinyldithioc arbamate, M(acpdtc) 2

    NASA Astrophysics Data System (ADS)

    Mohammad, Ali; Varshney, Charu; Nami, Shahab A. A.

    2009-07-01

    A series of mononuclear 3d-transition metal complexes of the type M(acpdtc) 2 have been synthesized (where acpdtc = 1-acetylpiperazinyldithiocarbamate, M = Mn(II), Fe(II), Co(II), Ni(II) and Cu(II)). The ligand and its complexes have been characterized by micro analysis (CHNS), TG/DSC, FT-IR, UV-vis, 1H NMR, magnetic susceptibility and conductance measurements. On the basis IR spectroscopy a symmetrical bidentate coordination has been observed for the 1-acetylpiperazinyldithiocarbamate moiety in all the complexes. On the basis of UV-vis spectra and magnetic susceptibility measurement a square-planar geometry has been proposed for the Ni(II) and Cu(II) complexes while the other complexes have been found to acquire a distorted-tetrahedral structure. The thermogravimetric and differential scanning calorimetric profile of the ligand indicates a two-step decomposition pattern while the complexes exhibit a three-stage thermogram forming metal sulfide as the eventual end product. The molar conductivity data of 1 mM solution in DMSO of the complexes is in close accord to their non-electrolytic behaviour. The ligand and its 3d-transition metal complexes have also been tested for their antifungicidal activity by agar well diffusion method using Fusarium sp. and Sclerotina sp. The maximum activity has been observed in case of Mn(II) and Fe(II) complexes.

  17. Photocatalytic activity of transition-metal-ion-doped coordination polymer (CP): photoresponse region extension and quantum yields enhancement via doping of transition metal ions into the framework of CPs.

    PubMed

    Xu, Xin-Xin; Cui, Zhong-Ping; Gao, Xin; Liu, Xiao-Xia

    2014-06-21

    To improve photocatalytic activity of a coordination polymer (CP) in the visible light region, five different transition metal ions (Fe(3+), Cr(3+), Ru(3+), Co(2+) and Ni(2+)) were introduced into its framework through an ion-exchange process. Among all the resulting transition metal ion doped coordination polymers (TMI/CPs), the one doped with Fe(3+) took on the most excellent photocatalytic activity and the highest quantum yields in the visible light region, decomposing 94% Rhodamine B (RhB) in 8 hours. It can be attributed to the doping of Fe(3+), which reduced the band gap (Eg) of the original CP, facilitating photocatalysis of the obtained polymer. Compared with the coordination polymer with Fe(3+) as a dopant, products doped with other metal ions presented weaker photocatalytic activities in the visible light region, while under the irradiation of ultraviolet light, they showed favorable photocatalytic properties. The results suggest that to dope transition metal ions into the framework of CPs would be an ideal option for enhancing the photocatalytic activity of coordination polymers.

  18. Voltage- and current-activated metal-insulator transition in VO2-based electrical switches: a lifetime operation analysis

    NASA Astrophysics Data System (ADS)

    Crunteanu, Aurelian; Givernaud, Julien; Leroy, Jonathan; Mardivirin, David; Champeaux, Corinne; Orlianges, Jean-Christophe; Catherinot, Alain; Blondy, Pierre

    2010-12-01

    Vanadium dioxide is an intensively studied material that undergoes a temperature-induced metal-insulator phase transition accompanied by a large change in electrical resistivity. Electrical switches based on this material show promising properties in terms of speed and broadband operation. The exploration of the failure behavior and reliability of such devices is very important in view of their integration in practical electronic circuits. We performed systematic lifetime investigations of two-terminal switches based on the electrical activation of the metal-insulator transition in VO2 thin films. The devices were integrated in coplanar microwave waveguides (CPWs) in series configuration. We detected the evolution of a 10 GHz microwave signal transmitted through the CPW, modulated by the activation of the VO2 switches in both voltage- and current-controlled modes. We demonstrated enhanced lifetime operation of current-controlled VO2-based switching (more than 260 million cycles without failure) compared with the voltage-activated mode (breakdown at around 16 million activation cycles). The evolution of the electrical self-oscillations of a VO2-based switch induced in the current-operated mode is a subtle indicator of the material properties modification and can be used to monitor its behavior under various external stresses in sensor applications.

  19. Trend in the Catalytic Activity of Transition Metals for the Oxygen Reduction Reaction by Lithium

    SciTech Connect

    Dathar, Gopi Krishna Phani; Shelton Jr, William Allison; Xu, Ye

    2012-01-01

    Periodic density functional theory (DFT) calculations indicate that the intrinsic activity of Au, Ag, Pt, Pd, Ir, and Ru for the oxygen reduction reaction by Li (Li-ORR) forms a volcano-like trend with respect to the adsorption energy of oxygen, with Pt and Pd being the most active. The trend is based on two mechanisms: the reduction of molecular O{sub 2} on Au and Ag and of atomic O on the remaining metals. Step edges are found to be more active for catalyzing the Li-ORR than close-packed surfaces. Our findings identify important considerations in the design of catalyst-promoted air cathodes for nonaqueous Li-air batteries.

  20. Transition metal catalysis in confined spaces.

    PubMed

    Leenders, Stefan H A M; Gramage-Doria, Rafael; de Bruin, Bas; Reek, Joost N H

    2015-01-21

    Transition metal catalysis plays an important role in both industry and in academia where selectivity, activity and stability are crucial parameters to control. Next to changing the structure of the ligand, introducing a confined space as a second coordination sphere around a metal catalyst has recently been shown to be a viable method to induce new selectivity and activity in transition metal catalysis. In this review we focus on supramolecular strategies to encapsulate transition metal complexes with the aim of controlling the selectivity via the second coordination sphere. As we will discuss, catalyst confinement can result in selective processes that are impossible or difficult to achieve by traditional methods. We will describe the template-ligand approach as well as the host-guest approach to arrive at such supramolecular systems and discuss how the performance of the catalyst is enhanced by confining it in a molecular container.

  1. Dihydrogen and Acetylene Activation by a Gold(I)/Platinum(0) Transition Metal Only Frustrated Lewis Pair.

    PubMed

    Campos, Jesús

    2017-03-01

    The first example of a frustrated Lewis pair (FLP) solely constructed around transition metal centers is described in this work. We have focused on the established capacity of Au(I) and Pt(0) complexes to act as Lewis acidic and basic fragments, respectively, while employing sufficiently bulky P(t)Bu3 and terphenyl phosphine ligands. This avoids formation of metallic Lewis adducts and confers the Au(I)/Pt(0) pair a remarkable capacity to activate dihydrogen and acetylene molecules in a fashion that closely resembles that of traditional main group FLP systems. As a consequence, unusual heterobimetallic Au(I)/Pt(II) complexes containing hydride (-H), acetylide (-C≡CH), and vinylene (-HC═CH-) bridges have been isolated.

  2. The carburization of transition metal molybdates (MxMoO₄, M= Cu, Ni or Co) and the generation of highly active metal/carbide catalysts for CO₂ hydrogenation

    SciTech Connect

    Rodriguez, Jose A.; Xu, Wenqian; Ramirez, Pedro J.; Stachiola, Dario; Brito, Joaquin L.

    2015-05-06

    A new approach has been tested for the preparation of metal/Mo₂C catalysts using mixed-metal oxide molybdates as precursors. Synchrotron-based in situ time-resolved X-ray diffraction was used to study the reduction and carburization processes of Cu₃(MoO₄)₂(OH)₂, a-NiMoO₄ and CoMoO₄•nH₂O by thermal treatment under mixtures of hydrogen and methane. In all cases, the final product was β-Mo₂C and a metal phase (Cu, Ni, or Co), but the transition sequence varied with the different metals, and it could be related to the reduction potential of the Cu²⁺, Ni²⁺ and Co²⁺ cations inside each molybdate. The synthesized Cu/Mo₂C, Ni/Mo₂C and Co/Mo₂C catalysts were highly active for the hydrogenation of CO₂. The metal/Mo₂C systems exhibited large variations in the selectivity towards methanol, methane and CnH₂n₊₂ (n > 2) hydrocarbons depending on the nature of the supported metal and its ability to cleave C-O bonds. Cu/Mo₂C displayed a high selectivity for CO and methanol production. Ni/Mo₂C and Co/Mo₂C were the most active catalysts for the activation and full decomposition of CO₂, showing high selectivity for the production of methane (Ni case) and CnH₂n₊₂ (n > 2) hydrocarbons (Co case).

  3. The carburization of transition metal molybdates (MxMoO₄, M= Cu, Ni or Co) and the generation of highly active metal/carbide catalysts for CO₂ hydrogenation

    DOE PAGES

    Rodriguez, Jose A.; Xu, Wenqian; Ramirez, Pedro J.; ...

    2015-05-06

    A new approach has been tested for the preparation of metal/Mo₂C catalysts using mixed-metal oxide molybdates as precursors. Synchrotron-based in situ time-resolved X-ray diffraction was used to study the reduction and carburization processes of Cu₃(MoO₄)₂(OH)₂, a-NiMoO₄ and CoMoO₄•nH₂O by thermal treatment under mixtures of hydrogen and methane. In all cases, the final product was β-Mo₂C and a metal phase (Cu, Ni, or Co), but the transition sequence varied with the different metals, and it could be related to the reduction potential of the Cu²⁺, Ni²⁺ and Co²⁺ cations inside each molybdate. The synthesized Cu/Mo₂C, Ni/Mo₂C and Co/Mo₂C catalysts were highlymore » active for the hydrogenation of CO₂. The metal/Mo₂C systems exhibited large variations in the selectivity towards methanol, methane and CnH₂n₊₂ (n > 2) hydrocarbons depending on the nature of the supported metal and its ability to cleave C-O bonds. Cu/Mo₂C displayed a high selectivity for CO and methanol production. Ni/Mo₂C and Co/Mo₂C were the most active catalysts for the activation and full decomposition of CO₂, showing high selectivity for the production of methane (Ni case) and CnH₂n₊₂ (n > 2) hydrocarbons (Co case).« less

  4. Synthesis and antioxidant activities of transition metal complexes based 3-hydroxysalicylaldehyde-S-methylthiosemicarbazone.

    PubMed

    Bal-Demirci, Tülay; Şahin, Musa; Kondakçı, Esin; Özyürek, Mustafa; Ülküseven, Bahri; Apak, Reşat

    2015-03-05

    The nickel(II), iron(III), oxovanadium(IV) complexes of the 3-hydroxysalicylidene-S-methyl-thiosemicarbazone (L) were obtained from the 3-hydroxysalicyldehyde-S-methylthiosemicarbazone with the R1-substituted-salicylaldehyde (R1: H, 3-OH) in the presence of Ni(II), Fe(III), VO(IV) as template ion. The ligand and its complexes were characterized by elemental analysis, electronic, UV/Vis., (1)HNMR, EPR and IR studies. The free ligand and its metal complexes have been tested for in vitro antioxidant capacity by reduction of copper(II) neocuproine (Cu(II)-Nc) using the CUPRAC method. The ligand exhibited more potent in vitro antioxidant capacity than its complexes. The obtained trolox equivalent antioxidant capacity (TEAC) value of the iron(III) complex (TEACCUPRAC=3.27) was higher than those of other complexes. Furthermore, the antioxidant activity of the free ligand and its complexes were determined by in vitro methods measuring the scavenging activity of reactive oxygen species (ROS) including hydroxyl radical (OH), superoxide anion radical (O2(-)), and hydrogen peroxide (H2O2), showing that especially the V(IV) and Fe(III) complexes had significant scavenging activity for ROS.

  5. Thermal ammonia activation by cationic transition-metal hydrides of the first row--small but mighty.

    PubMed

    Kretschmer, Robert; Schlangen, Maria; Schwarz, Helmut

    2012-06-01

    The thermal reactions of cationic 3d transition-metal hydrides MH(+) (M=Sc-Zn, except V and Cu) with ammonia have been studied by gas-phase experiments and computational methods. There are three primary reaction channels: 1) H(2) elimination by N-H bond activation, 2) ligand exchange under the formation of M(NH(3))(+), and 3) proton transfer to yield NH(4)(+). Computational studies of these three reaction channels have been performed for the couples MH(+)/NH(3) (M=Sc-Zn) to elucidate mechanistic aspects and characteristic reaction patterns of the first row. For N-H activation, σ-bond metathesis was found to be operative.

  6. New 15-membered tetraaza (N4) macrocyclic ligand and its transition metal complexes: Spectral, magnetic, thermal and anticancer activity

    NASA Astrophysics Data System (ADS)

    El-Boraey, Hanaa A.; EL-Gammal, Ohyla A.

    2015-03-01

    Novel tetraamidemacrocyclic 15-membered ligand [L] i.e. naphthyl-dibenzo[1,5,9,12]tetraazacyclopentadecine-6,10,11,15-tetraoneand its transition metal complexes with Fe(II), Co(II), Ni(II), Cu(II), Ru(III) and Pd(II) have been synthesized and characterized by elemental analysis, spectral, thermal as well as magnetic and molar conductivity measurements. On the basis of analytical, spectral (IR, MS, UV-Vis, 1H NMR and EPR) and thermal studies distorted octahedral or square planar geometry has been proposed for the complexes. The antitumor activity of the synthesized ligand and some complexes against human breast cancer cell lines (MCF-7) and human hepatocarcinoma cell lines (HepG2) has been studied. The complexes (IC50 = 2.27-2.7, 8.33-31.1 μg/mL, respectively) showed potent antitumor activity, towards the former cell lines comparable with their ligand (IC50 = 13, 26 μg/mL, respectively). The results show that the activity of the ligand towards breast cancer cell line becomes more pronounced and significant when coordinated to the metal ion.

  7. Transition metals in superheat melts

    NASA Technical Reports Server (NTRS)

    Jakes, Petr; Wolfbauer, Michael-Patrick

    1993-01-01

    A series of experiments with silicate melts doped with transition element oxides was carried out at atmospheric pressures of inert gas at temperatures exceeding liquidus. As predicted from the shape of fO2 buffer curves in T-fO2 diagrams the reducing conditions for a particular oxide-metal pair can be achieved through the T increase if the released oxygen is continuously removed. Experimental studies suggest that transition metals such as Cr or V behave as siderophile elements at temperatures exceeding liquidus temperatures if the system is not buffered by the presence of other oxide of more siderophile element. For example the presence of FeO prevents the reduction of Cr2O3. The sequence of decreasing siderophility of transition elements at superheat conditions (Mo, Ni, Fe, Cr) matches the decreasing degree of depletion of siderophile elements in mantle rocks as compared to chondrites.

  8. Evaluation of DNA cleavage, antimicrobial and anti-tubercular activities of potentially active transition metal complexes derived from 2,6-di(benzofuran-2-carbohydrazono)-4-methylphenol

    NASA Astrophysics Data System (ADS)

    Kokare, Dhoolesh Gangaram; Kamat, Vinayak; Naik, Krishna; Nevrekar, Anupama; Kotian, Avinash; Revankar, Vidyanand K.

    2017-01-01

    A 2,6-diformyl-4-methyl phenol based multidentate novel symmetric ligand and it is late first-row transition metal complexes have been prepared. The ligand and metal complexes were characterized by different spectroscopic techniques. The ligand shows a symmetric polydentate coordination mode through the phenoxide bimetallic bridge, two azomethine nitrogen atoms and two carbonyl oxygen atoms. All the complexes appear to be binuclear with octahedral geometry and nonelectrolytic nature. Complexes have shown significant growth inhibitory activity against tested bacterial and fungal strains as compared to that of ligand. The cobalt complex exhibited better antifungal potency than the standard used. Copper complex exhibits good antifungal activity whereas cobalt and zinc complexes are found to be good antibacterial agents. Ligand and complexes have shown excellent anti-tubercular activity and Calf Thymus-DNA cleavage property.

  9. Transition metal catalyzed transformations of unsaturated molecules

    SciTech Connect

    Not Available

    1989-01-01

    In this proposal, research in three areas of transition metal catalyzed transformations of small molecules is proposed. The first encompasses metal catalyzed processes for the synthesis of several classes of carbon monoxide containing polymers. This section describes plans for metal catalyzed synthesis of (a) new alternating copolymers of carbon monoxide and olefins, (b) block copolymers consisting of segments of the olefin homopolymer and the olefin- carbon monoxide alternating copolymer, and (c) polycarbonates, polyesters and polyamides. The second section involves the examination of the chemistry of metal complexes incorporating oxo and hydrocarbyl ligands as a model for the heterogeneous oxidation of olefins and alkanes by meal oxides. Specific plans are to mimic in solution two proposed key steps in the heterogeneous oxidations. These are (a) the heterolytic cleavage of an alkyl (or allyl) C-H bond that is assisted by an oxo group, and (a) the transfer of an oxo group to the resultant metal bound alkyl (or allyl) ligand. The third section concerned with the development of a hybrid catalyst system involving both homogeneous and heterogeneous components for the oxidative functionalization of alkanes. The basic idea is to employ a transition metal in the elemental state to activate C-H bonds of alkanes and form surface alkyl groups. An additional transition metal species will be present in solution which will serve to oxidize these surface alkyl groups to ultimately yield oxidatively functionalized organic products. 57 refs.

  10. Transition metal activation and functionalization of carbon-hydrogen bonds. Progress report, December 1, 1989--November 30, 1992

    SciTech Connect

    Jones, W.D.

    1992-06-01

    We are investigating the fundamental thermodynamic and kinetic factors that influence carbon-hydrogen bond activation at homogeneous transition metal centers and the conversion of hydrocarbons into functionalized products of potential use to the chemical industry. Advances have been made in both understanding the interactions of hydrocarbons with metals and in the functionalization of hydrocarbons. We have found that RhCl(PR{sub 3}){sub 2}(CNR) complexes can catalyze the insertion of isonitriles into the C-H bonds or arenes upon photolysis. The mechanism of these reactions was found to proceed by way of initial phosphine dissociation, followed by C-H activation and isonitrile insertion. We have also examined reactions of a series of arenes with (C{sub 5}Me{sub 5})Rh(PMe{sub 3})PhH and begun to map out the kinetic and thermodynamic preferences for arene coordination. The effects of resonance, specifically the differences in the Hueckel energies of the bound vs free ligand, are now believed to fully control the C-H activation/{eta}{sup 2}-coordination equilibria. We have begun to examine the reactions of rhodium isonitrile pyrazolylborates for alkane and arene C-H bond activation. A new, labile, carbodiimide precursor has been developed for these studies. We have completed studies of the reactions of (C{sub 5}Me{sub 5})Rh(PMe{sub 3})H{sub 2} with D{sub 2} and PMe{sub 3} that indicate that both {eta}{sup 5} {yields} {eta}{sup 3} ring slippage and metal to ring hydride migration occur more facilely than thermal reductive elimination of H{sub 2}. We have examined the reactions of heterocycles with (C{sub 5}Me{sub 5})Rh(PMe{sub 3})PhH and found that pyrrole and furan undergo C-H or N-H activation. Thiophene, however, undergoes C-S bond oxidative addition, and the mechanism of activation has been shown to proceed through sulfur coordination prior to C-S insertion.

  11. Hydrodesulfurization on Transition Metal Catalysts: Elementary Steps of C-S Bond Activation and Consequences of Bifunctional Synergies

    NASA Astrophysics Data System (ADS)

    Yik, Edwin Shyn-Lo

    The presence of heteroatoms (e.g. S, N) in crude oil poses formidable challenges in petroleum refining processes as a result of their irreversible binding on catalytically active sites at industrially relevant conditions. With increasing pressures from legislation that continues to lower the permissible levels of sulfur content in fuels, hydrodesulfurization (HDS), the aptly named reaction for removing heteroatoms from organosulfur compounds, has become an essential feedstock pretreatment step to remove deleterious species from affecting downstream processing. Extensive research in the area has identified the paradigm catalysts for desulfurization; MoSx or WSx, promoted with Co or Ni metal; however, despite the vast library of both empirical and fundamental studies, a clear understanding of site requirements, the elementary steps of C-S hydrogenolysis, and the properties that govern HDS reactivity and selectivity have been elusive. While such a lack of rigorous assessments has not prevented technological advancements in the field of HDS catalysis, fundamental interpretations can inform rational catalyst and process design, particularly in light of new requirements for "deep" desulfurization and in the absence of significant hydrotreatment catalyst developments in recent decades. We report HDS rates of thiophene, which belongs to a class of compounds that are most resistant to sulfur removal (i.e. substituted alkyldibenzothiophenes), over a range of industrially relevant temperatures and pressures, measured at differential conditions and therefore revealing their true kinetic origins. These rates, normalized by the number of exposed metal atoms, on various SiO 2-supported, monometallic transition metals (Re, Ru, Pt), range several orders of magnitude. Under relevant HDS conditions, Pt and Ru catalysts form a layer of chemisorbed sulfur on surfaces of a metallic bulk, challenging reports that assume the latter exists as its pyrite sulfide phase during reaction. While

  12. Reactivity of transition metal solvates

    NASA Astrophysics Data System (ADS)

    Berezin, Boris D.

    1991-09-01

    Reactivity data are generalised for one of the most important classes of complexes, solvates, which are quantitatively nearly unstudied. Various approaches to studying and describing the reactivity are compared with respect to solvation of the reagents and the transition state. The specifics and mechanism of ligand substitution in pure and mixed organic solvents are found. The reactivity of simple (homoleptic) and mixed solvates toward macrocycles is examined in detail using porphyrins as an example. The kinetic method of indicator reactions is applied to porphyrins in order to study the state of transition metal salts in organic solvents and the stability of the coordination spheres of acidosalts (MXnn-2), acidosolvates (MX2Sn-2) and their transition states. The concentration dependence of the rate constant of an indicator reaction is demonstrated to be due to a change in the inner coordination sphere and a shift of equilibria between the various coordination complexes. The bibliography includes 38 references.

  13. C-H and H-H Activation in Transition Metal Complexes and on Surfaces.

    DTIC Science & Technology

    1983-01-01

    Jean-Yves Saillard and Roald Hoffmann Prepared for Publication in the Journal of the American Chemical Society. Depeartment of Chemistry DTIC...I ’TB METAL COMPLEXES AND ON SURFACES ’"flfl’t2 []J =: % if i I~t ion- Distrjlbution/ ,. "iity Codes " .and/or jean-Yves Saillard and Roald Hoffmann...Ni, using a method much better than ours, may be found in Wang , C. S.; Callasay, J. Phys. Rev. B 1977, 15, 298-306. There are some noticeable

  14. Origin of enhanced visible-light photocatalytic activity of transition-metal (Fe, Cr and Co)-doped CeO2: effect of 3 d orbital splitting

    NASA Astrophysics Data System (ADS)

    Yang, Ke; Li, Dong-Feng; Huang, Wei-Qing; Xu, Liang; Huang, Gui-Fang; Wen, Shuangchun

    2017-01-01

    Enhanced visible-light photocatalytic activity of transition-metal-doped ceria (CeO2) nanomaterials has experimentally been demonstrated, whereas there are very few reports mentioning the mechanism of this behavior. Here, we use first-principles calculations to explore the origin of enhanced photocatalytic performance of CeO2 doped with transition metal impurities (Fe, Cr and Co). When a transition metal atom substitutes a Ce atom into CeO2, t 2g and e g levels of 3 d orbits appear in the middle of band gap owing to the effect of cubic ligand field, and the former is higher than latter. Interestingly, t 2g subset of FeCe (CoCe and CrCe)-Vo-CeO2 splits into two parts: one merges into the conduction band, the other as well as e g will remain in the gap, because O vacancy defect adjacent to transition metal atom will break the symmetry of cubic ligand field. These e g and t 2g levels in the band gap are beneficial for absorbing visible-light and enhancing quantum efficiency because of forbidden transition, which is one key factor for enhanced visible-light photocatalytic activity. The band gap narrowing also leads to a redshift of optical absorbance and high photoactivity. These findings can rationalize the available experimental results and provide some new insights for designing CeO2-based photocatalysts with high photocatalytic performance.

  15. Influence of activated-carbon-supported transition metals on the decomposition of polychlorobiphenyls. Part I: Catalytic decomposition and kinetic analysis.

    PubMed

    Sun, Yifei; Tao, Fei; Liu, Lina; Zeng, Xiaolan; Wang, Wei

    2016-09-01

    In this study, the synergism between activated carbon (AC) as a catalyst support and transition metals (TMs) is used to destroy low concentrations of PCBs. AC-supported TM catalysts were prepared according to two different methods: impregnation and ion exchange. Thermal reactions between 2,2',4,4',5,5'-hexachlorobiphenyl (PCB-153) and catalysts generated using AC-supported Ni or Cu ion exchange were conducted under a N2 atmosphere and resulted in a decomposition efficiency > 99.0%. Decomposition efficiency of PCB-153, the residual PCB-153 distribution, and the fingerprint characteristics of the decomposition products are investigated. Important findings include: (i) establishing a ranking of TM reactivities with respect to PCB decomposition of: Ni > Cu > Zn > Fe, (ii) PCB degradation reactions proceed via adsorption, reaction, and desorption, (iii) for ion-exchange-type catalysts, the activation energy order was IRNi-C < IRCu-C < IRZn-C < IRFe-C, which matches the order of the catalytic effects of the catalyst.

  16. The metal-non-metal transition in compressed metal vapours

    NASA Astrophysics Data System (ADS)

    Hensel, F.; Marceca, E.; Pilgrim, W. C.

    1998-12-01

    Knowledge of the properties of hydrogen and helium and their mixtures, at temperatures and pressures prevailing in the giant planets is of considerable interest for planetary modelling. In the light of the unfavourable outlook for reliable measurements under these extreme conditions effort has been spent investigating the high-temperature high-pressure properties of fluid metals which are experimentally accessible in the laboratory and which might serve as models for compressed fluid hydrogen. The main emphasis of the paper is on the density dependence of the dynamic structure factor 0953-8984/10/49/026/img1 of liquid rubidium which reveals that a monoatomic-molecular transition occurs in the metal-non-metal transition region of the expanded liquid analogous to that suggested to occur in shock compressed hydrogen. Additional emphasis is on new results of the phase behaviour of dilute mixtures of helium in the near critical metal mercury.

  17. Transition and Group IIB Metal Complexes With “Active Aldehyde” Derivatives of Thiamine

    PubMed Central

    Louloudi, Maria; Laussac, Jean Pierre; Bau, Robert

    1994-01-01

    The Zn2+, Cd2+, Hg2+, Co2+ and Ni2+ ions produce zwitterionic type complexes with the ligands (L), 2-(α-hydroxy-benzyl)thiamine=HBT and 2-(α-hydroxy-cyclohexyl-methyl)thiamine = HCMT, of the type MLCl3. The ligands are in the S conformation, the metals are bound to N1, of the pyrimidine moiety of thiamine and the complexes have a trigonally distorted tetrahedral structure, as the crystal structure of the complex Zn(HCMT)Cl3 (orthorombic, a=14.4 b=14.1 c=17.4 β=105.6O V=3392A3 R=13.8%), the one and two dimensional 1H nmr spectra of the Zn2+, Cd2+ and Hg2+ complexes and the electronic spectra of the Co2+ and Ni2+ complexes show. A brief review of the previous techniques (structure of the Hg(HBT)Cl3 complex, IR-Raman spectra, 13C nmr in solution and solid state etc) used to characterize these complexes, is also given here and the proper conclusions drawn. PMID:18476234

  18. Approximating metal-insulator transitions

    NASA Astrophysics Data System (ADS)

    Danieli, Carlo; Rayanov, Kristian; Pavlov, Boris; Martin, Gaven; Flach, Sergej

    2015-12-01

    We consider quantum wave propagation in one-dimensional quasiperiodic lattices. We propose an iterative construction of quasiperiodic potentials from sequences of potentials with increasing spatial period. At each finite iteration step, the eigenstates reflect the properties of the limiting quasiperiodic potential properties up to a controlled maximum system size. We then observe approximate Metal-Insulator Transitions (MIT) at the finite iteration steps. We also report evidence on mobility edges, which are at variance to the celebrated Aubry-André model. The dynamics near the MIT shows a critical slowing down of the ballistic group velocity in the metallic phase, similar to the divergence of the localization length in the insulating phase.

  19. Synthesis of transition metal carbonitrides

    DOEpatents

    Munir, Zuhair A. R.; Eslamloo-Grami, Maryam

    1994-01-01

    Transition metal carbonitrides (in particular, titanium carbonitride, TiC.sub.0.5 N.sub.0.5) are synthesized by a self-propagating reaction between the metal (e.g., titanium) and carbon in a nitrogen atmosphere. Complete conversion to the carbonitride phase is achieved with the addition of TiN as diluent and with a nitrogen pressure .gtoreq.0.6 MPa. Thermodynamic phase-stability calculations and experimental characterizations of quenched samples provided revealed that the mechanism of formation of the carbonitride is a two-step process. The first step involves the formation of the nonstoichiometric carbide, TiC.sub.0.5, and is followed by the formation of the product by the incorporation of nitrogen in the defect-structure carbide.

  20. Radiative transitions in metallic nanoclusters

    NASA Astrophysics Data System (ADS)

    Shalin, A. S.

    2008-02-01

    In this article, a new theoretical approach to studying light-scattering characteristics of nanosized objects based on the solution to the Thomas-Fermi equation and quasi-classical approximation is considered. It is shown that the distribution of valence electrons in the volume of metallic clusters exhibits a specific structure of "spatial zones." With the aid of quasi-classical wave functions, expressions for the appropriate dipole moments of the transitions between the ground and excited states are obtained; the behavior of the spectrum of gold clusters depending on their sizes is studied; a comparison with existing experimental data is carried out.

  1. Iodide effects in transition metal catalyzed reactions.

    PubMed

    Maitlis, Peter M; Haynes, Anthony; James, Brian R; Catellani, Marta; Chiusoli, Gian Paolo

    2004-11-07

    The unique properties of I(-) allow it to be involved in several different ways in reactions catalyzed by the late transition metals: in the oxidative addition, the migration, and the coupling/reductive elimination steps, as well as in substrate activation. Most steps are accelerated by I(-)(for example through an increased nucleophilicity of the metal center), but some are retarded, because a coordination site is blocked. The "soft" iodide ligand binds more strongly to soft metals (low oxidation state, electron rich, and polarizable) such as the later and heavier transition metals, than do the other halides, or N- and O-centered ligands. Hence in a catalytic cycle that includes the metal in a formally low oxidation state there will be less tendency for the metal to precipitate (and be removed from the cycle) in the presence of I(-) than most other ligands. Iodide is a good nucleophile and is also easily and reversibly oxidized to I(2). In addition, I(-) can play key roles in purely organic reactions that occur as part of a catalytic cycle. Thus to understand the function of iodide requires careful analysis, since two or sometimes more effects occur in different steps of one single cycle. Each of these topics is illustrated with examples of the influence of iodide from homogeneous catalytic reactions in the literature: methanol carbonylation to acetic acid and related reactions; CO hydrogenation; imine hydrogenation; and C-C and C-N coupling reactions. General features are summarised in the Conclusions.

  2. Syntheses, crystal structures, anticancer activities of three reduce Schiff base ligand based transition metal complexes

    NASA Astrophysics Data System (ADS)

    Chang, Hui-Qin; Jia, Lei; Xu, Jun; Zhu, Tao-Feng; Xu, Zhou-Qing; Chen, Ru-Hua; Ma, Tie-Liang; Wang, Yuan; Wu, Wei-Na

    2016-02-01

    Three nickel(II) complexes, [Ni2(L1)2(tren)2(H2O)](ClO4)3 (1), [NiL2(tren)2](ClO4)·2.5H2O (2), [NiL2(tren)2]I·1.5H2O·CH3OH (3) based on amino acid reduced Schiff ligands are synthesized and characterized by physico-chemical and spectroscopic methods. The results show that in all complexes, the amino acid ligand is deprotonated and acts as an anionic ligand. In the dinuclear complex 1, each Ni(II) atom has a distorted octahedron geometry while with different coordination environment. However, the complexes 2 and 3 are mononuclear, almost with the same coordination environment. Furthermore, in vitro experiments are carried out, including MTT assay, Annexin V/PI flow cytometry and western blotting, to assess whether the complexes have antitumor effect. And the results show that all the three complexes have moderate anticancer activity towards human hepatic cancer (HepG2), human cervical cancer (HeLa) and human prostate (PC3) cell lines, in a concentration dependent way. The complex 1 exhibit higher cytotoxicity than the other two complexes and can induce human hepatic cancer cell (HepG2) to cell apoptosis by activating caspase 3.

  3. Single-layer transition metal sulfide catalysts

    DOEpatents

    Thoma, Steven G.

    2011-05-31

    Transition Metal Sulfides (TMS), such as molybdenum disulfide (MoS.sub.2), are the petroleum industry's "workhorse" catalysts for upgrading heavy petroleum feedstocks and removing sulfur, nitrogen and other pollutants from fuels. We have developed an improved synthesis technique to produce SLTMS catalysts, such as molybdenum disulfide, with potentially greater activity and specificity than those currently available. Applications for this technology include heavy feed upgrading, in-situ catalysis, bio-fuel conversion and coal liquefaction.

  4. Transition-metal-catalyzed additions of C-H bonds to C-X (X = N, O) multiple bonds via C-H bond activation.

    PubMed

    Yan, Guobing; Wu, Xiangmei; Yang, Minghua

    2013-09-14

    Chemical transformations via catalytic C-H bond activation have been established as one of the most powerful tools in organic synthetic chemistry. Transition-metal-catalyzed addition reactions of C-H bonds to polar C-X (X = N, O) multiple bonds, such as aldehydes, ketones, imines, isocyanates, nitriles, isocyanides, carbon monoxide and carbon dioxide, have undergone a rapid development in recent years. In this review, recent advances in this active area have been highlighted and their mechanisms have been discussed.

  5. Transition Metals and Virulence in Bacteria

    PubMed Central

    Palmer, Lauren D.; Skaar, Eric P.

    2016-01-01

    Transition metals are required trace elements for all forms of life. Due to their unique inorganic and redox properties, transition metals serve as cofactors for enzymes and other proteins. In bacterial pathogenesis, the vertebrate host represents a rich source of nutrient metals, and bacteria have evolved diverse metal acquisition strategies. Host metal homeostasis changes dramatically in response to bacterial infections, including production of metal sequestering proteins and the bombardment of bacteria with toxic levels of metals. Presumably, in response, bacteria have evolved systems to subvert metal sequestration and toxicity. The coevolution of hosts and their bacterial pathogens in the battle for metals has uncovered emerging paradigms in social microbiology, rapid evolution, host specificity, and metal homeostasis across domains. This review focuses on recent advances and open questions in our understanding of the complex role of transition metals at the host-pathogen interface. PMID:27617971

  6. Silylations of Arenes with Hydrosilanes: From Transition-Metal-Catalyzed C¢X Bond Cleavage to Environmentally Benign Transition-Metal-Free C¢H Bond Activation.

    PubMed

    Xu, Zheng; Xu, Li-Wen

    2015-07-08

    The construction of carbon-silicon bonds is highlighted as an exciting achievement in the field of organosilicon chemistry and green chemistry. Recent developments in this area will enable the sustainable chemical conversion of silicon resources into synthetically useful compounds. Especially, the catalytic silylation through C¢H bond activation without directing groups and hydrogen acceptors is one of the most challenging topics in organic chemistry and green chemistry. These remarkable findings on catalytic silylation can pave the way to a more environmentally benign utilization of earth-abundant silicon-based resources in synthetic chemistry.

  7. Method for dry etching of transition metals

    DOEpatents

    Ashby, C.I.H.; Baca, A.G.; Esherick, P.; Parmeter, J.E.; Rieger, D.J.; Shul, R.J.

    1998-09-29

    A method for dry etching of transition metals is disclosed. The method for dry etching of a transition metal (or a transition metal alloy such as a silicide) on a substrate comprises providing at least one nitrogen- or phosphorus-containing {pi}-acceptor ligand in proximity to the transition metal, and etching the transition metal to form a volatile transition metal/{pi}-acceptor ligand complex. The dry etching may be performed in a plasma etching system such as a reactive ion etching (RIE) system, a downstream plasma etching system (i.e. a plasma afterglow), a chemically-assisted ion beam etching (CAIBE) system or the like. The dry etching may also be performed by generating the {pi}-acceptor ligands directly from a ligand source gas (e.g. nitrosyl ligands generated from nitric oxide), or from contact with energized particles such as photons, electrons, ions, atoms, or molecules. In some preferred embodiments of the present invention, an intermediary reactant species such as carbonyl or a halide ligand is used for an initial chemical reaction with the transition metal, with the intermediary reactant species being replaced at least in part by the {pi}-acceptor ligand for forming the volatile transition metal/{pi}-acceptor ligand complex.

  8. Method for dry etching of transition metals

    DOEpatents

    Ashby, Carol I. H.; Baca, Albert G.; Esherick, Peter; Parmeter, John E.; Rieger, Dennis J.; Shul, Randy J.

    1998-01-01

    A method for dry etching of transition metals. The method for dry etching of a transition metal (or a transition metal alloy such as a silicide) on a substrate comprises providing at least one nitrogen- or phosphorous-containing .pi.-acceptor ligand in proximity to the transition metal, and etching the transition metal to form a volatile transition metal/.pi.-acceptor ligand complex. The dry etching may be performed in a plasma etching system such as a reactive ion etching (RIE) system, a downstream plasma etching system (i.e. a plasma afterglow), a chemically-assisted ion beam etching (CAIBE) system or the like. The dry etching may also be performed by generating the .pi.-acceptor ligands directly from a ligand source gas (e.g. nitrosyl ligands generated from nitric oxide), or from contact with energized particles such as photons, electrons, ions, atoms, or molecules. In some preferred embodiments of the present invention, an intermediary reactant species such as carbonyl or a halide ligand is used for an initial chemical reaction with the transition metal, with the intermediary reactant species being replaced at least in part by the .pi.-acceptor ligand for forming the volatile transition metal/.pi.-acceptor ligand complex.

  9. Superconducting Metallic Glass Transition-Edge-Sensors

    NASA Technical Reports Server (NTRS)

    Hays, Charles C. (Inventor)

    2013-01-01

    A superconducting metallic glass transition-edge sensor (MGTES) and a method for fabricating the MGTES are provided. A single-layer superconducting amorphous metal alloy is deposited on a substrate. The single-layer superconducting amorphous metal alloy is an absorber for the MGTES and is electrically connected to a circuit configured for readout and biasing to sense electromagnetic radiation.

  10. Spectroscopic and structural studies of the Schiff base 3-methoxy-N-salicylidene-o-amino phenol complexes with some transition metal ions and their antibacterial, antifungal activities

    NASA Astrophysics Data System (ADS)

    Abo-Aly, M. M.; Salem, A. M.; Sayed, M. A.; Abdel Aziz, A. A.

    2015-02-01

    Spectroscopic (IR, Raman, NMR, UV-visible, and ESR), and structural studies of the ligand 3-methoxy-N-salicylidene-o-amino phenol (H2L) and its synthesized complexes with some transition metal ions (Mn(II), Co(II), Ni(II)), Cu(II) and Zn(II)) were recorded and analyzed. The magnetic properties and thermal gravimetric analysis (TGA and DTA) were also measured for the complexes. The metal complexes were found to have The structural formula MLṡH2O and the metal ions Mn(II), Co(II), Ni(II)) and Zn(II) were found to form tetrahedral complexes with the ligand whereas Cu(II) formed a square planar one. Antimicrobial activity of the ligand and its complexes were also investigated and discussed.

  11. Spectroscopic and structural studies of the Schiff base 3-methoxy-N-salicylidene-o-amino phenol complexes with some transition metal ions and their antibacterial, antifungal activities.

    PubMed

    Abo-Aly, M M; Salem, A M; Sayed, M A; Abdel Aziz, A A

    2015-02-05

    Spectroscopic (IR, Raman, NMR, UV-visible, and ESR), and structural studies of the ligand 3-methoxy-N-salicylidene-o-amino phenol (H2L) and its synthesized complexes with some transition metal ions (Mn(II), Co(II), Ni(II)), Cu(II) and Zn(II)) were recorded and analyzed. The magnetic properties and thermal gravimetric analysis (TGA and DTA) were also measured for the complexes. The metal complexes were found to have The structural formula ML⋅H2O and the metal ions Mn(II), Co(II), Ni(II)) and Zn(II) were found to form tetrahedral complexes with the ligand whereas Cu(II) formed a square planar one. Antimicrobial activity of the ligand and its complexes were also investigated and discussed.

  12. Photochemistry of Metal-Metal Bonded Transition Element Complexes

    DTIC Science & Technology

    1980-12-12

    CONTRACT NO0014-75-C-0880 Task No. NR 051-579 TECHNICAL REPORT NO. 25 PHOTOCHEMISTRY OF METAL-METAL BONDED TRANSITION ELEMENT COMPLEXES by Mark S . Wrighton...unlimited. 17, Di:- t. Ii t I / Avolil:J, ; Codc’s ! Photochemistry of Metal-Metal Bonded Transition Element Complexes Mark S . Wrighton, James L. Graff...publication in the ACS Symposium Series, "Reactivity of MetalrMetal Bonds", M. H. Chisholm, ed.) IA c*Addre~ s orrespondence to this author, ; r[ I . - - 1

  13. Transition metal ions effect on the properties and photocatalytic activity of nanocrystalline TiO2 prepared in an ionic liquid.

    PubMed

    Ghasemi, S; Rahimnejad, S; Setayesh, S Rahman; Rohani, S; Gholami, M R

    2009-12-30

    TiO(2) and transition metal (Cr, Mn, Fe, Co, Ni, Cu, and Zn) doped TiO(2) nanoparticles were synthesized by the sol-gel method using 2-hydroxylethylammonium formate as an ionic liquid. All the prepared samples were calcined at 500 degrees C and characterized by X-ray diffraction (XRD), BET surface area determination, energy dispersive X-ray (EDX) analysis, diffuse reflectance spectroscopy (DRS), and Fourier transformed infrared (FT-IR) techniques. The studies revealed that transition metal (TM) doped nanoparticles have smaller crystalline size and higher surface area than pure TiO(2). Dopant ions in the TiO(2) structure caused significant absorption shift into the visible region. The results of photodegradation of Acid Blue92 (AB92) in aqueous medium under UV light showed that photocatalytic activity of TiO(2) nanoparticles was significantly enhanced by the presence of some transition metal ions. Chemical Oxygen Demand (COD) of dye solutions were done at regular intervals gave a good idea about mineralization of dye.

  14. Transition-Metal-Free Biomolecule-Based Flexible Asymmetric Supercapacitors.

    PubMed

    Yang, Yun; Wang, Hua; Hao, Rui; Guo, Lin

    2016-09-01

    A transition-metal-free asymmetric supercapacitor (ASC) is successfully fabricated based on an earth-abundant biomass derived redox-active biomolecule, named lawsone. Such an ASC exhibits comparable or even higher energy densities than most of the recently reported transition-metal-based ASCs, and this green ASC generation from renewable resources is promising for addressing current issues of electronic hazard processing, high cost, and unsustainability.

  15. Metal-metal multiple bonding in C3-symmetric bimetallic complexes of the first row transition metals.

    PubMed

    Krogman, Jeremy P; Thomas, Christine M

    2014-05-25

    Metal-metal multiple bonds have been an intense area of focus in inorganic chemistry for many decades as a result of their fundamentally interesting bonding properties, as well as their potential applications in multielectron transfer and small molecule activation processes. Much of what is known in this field revolves around 2nd and 3rd row transition metals, with fundamental knowledge lacking in the area of bonds between elements of the first transition series. The smaller size and tendency of first row ions to adopt high-spin electron configurations weaken metal-metal interactions and serve to complicate the interpretation of the electronic structure and bonding in bimetallic species containing first row transition metals. Furthermore, traditional tetragonal "paddlewheel" complexes dominate the metal-metal multiple bond literature, and only recently have researchers begun to take advantage of the weaker ligand field in three-fold symmetric bimetallic complexes to encourage more favourable metal-metal bonding interactions. In the past 5 years, several research groups have exploited three-fold symmetric frameworks to investigate new trends in metal-metal bonding involving the first row transition metals. This feature article serves to highlight recent achievements in this area and to use C3-symmetric systems as a model to better understand the fundamental aspects of multiple bonds featuring first row transition metals.

  16. Synthesis, characterization and biological activity of transition metal complexes with Schiff bases derived from 2-nitrobenzaldehyde with glycine and methionine

    NASA Astrophysics Data System (ADS)

    Singh, Bibhesh K.; Rajour, Hemant K.; Prakash, Anant

    Schiff bases derived from 2-nitrobenzaldehyde with amino acids (glycine, methionine) and their Co(II), Ni(II) and Cu(II) complexes have been synthesized and characterized by various physico-chemical techniques. From spectral studies, it has been concluded that the ligands acts as bidentate molecule, coordinates metal through azomethine nitrogen and carboxylate oxygen. Mass spectrum explains the successive degradation of the molecular species in solution and justifies ML2 complexes. X-ray powder diffraction helps to determine the cell parameters of the complexes. Molecular structure of the complexes has been optimized by MM2 calculations and suggests a square planar geometry. The ligands and their metal complexes have been tested in vitro against Streptococcus, Staph, Staphylococcus aureus and Escherchia coli bacteria in order to assess their antibacterial potential. The results indicate that the biological activity increases on complexation.

  17. Promotional effects of chemisorbed oxygen and hydroxide in the activation of C-H and O-H bonds over transition metal surfaces

    NASA Astrophysics Data System (ADS)

    Hibbitts, David; Neurock, Matthew

    2016-08-01

    Electronegative coadsorbates such as atomic oxygen (O*) and hydroxide (OH*) can act as Brønsted bases when bound to Group 11 as well as particular Group 8-10 metal surfaces and aid in the activation of X-H bonds. First-principle density functional theory calculations were carried out to systematically explore the reactivity of the C-H bonds of methane and surface methyl intermediates as well as the O-H bond of methanol directly and with the assistance of coadsorbed O* and OH* intermediates over Group 11 (Cu, Ag, and Au) and Group 8-10 transition metal (Ru, Rh, Pd, Os, Ir, and Pt) surfaces. C-H as well as O-H bond activation over the metal proceeds via a classic oxidative addition type mechanism involving the insertion of the metal center into the C-H or O-H bond. O* and OH* assist C-H and O-H activation over particular Group 11 and Group 8-10 metal surfaces via a σ-bond metathesis type mechanism involving the oxidative addition of the C-H or O-H bond to the metal along with a reductive deprotonation of the acidic C-H and O-H bond over the M-O* or M-OH* site pair. The O*- and OH*-assisted C-H activation paths are energetically preferred over the direct metal catalyzed C-H scission for all Group 11 metals (Cu, Ag, and Au) with barriers that are 0.4-1.5 eV lower than those for the unassisted routes. The barriers for O*- and OH*-assisted C-H activation of CH4 on the Group 8-10 transition metals, however, are higher than those over the bare transition metal surfaces by as much as 1.4 eV. The C-H activation of adsorbed methyl species show very similar trends to those for CH4 despite the differences in structure between the weakly bound methane and the covalently adsorbed methyl intermediates. The activation of the O-H bond of methanol is significantly promoted by O* as well as OH* intermediates over both the Group 11 metals (Cu, Ag, and Au) as well as on all Group 8-10 metals studied (Ru, Rh, Pd, Os, Ir, and Pt). The O*- and OH*-assisted CH3O-H barriers are 0.6 to 2

  18. Transition metal complexes of neocryptolepine analogues. Part I: synthesis, spectroscopic characterization, and invitro anticancer activity of copper(II) complexes.

    PubMed

    Emam, Sanaa Moustafa; El Sayed, Ibrahim El Tantawy; Nassar, Nagla

    2015-03-05

    New generation of copper(II) complexes with aminoalkylaminoneocryptolepine as bidentate ligands has been synthesized and it is characterized by elemental analyses, magnetic moment, spectra (IR, UV-Vis, (1)H NMR and ESR) and thermal studies. The IR data suggest the coordination modes for ligands which behave as a bidentate with copper(II) ion. Based on the elemental analysis, magnetic studies, electronic and ESR data, binuclear square planar geometry was proposed for complexes 7a, 7b, square pyramidal for 9a, 9b and octahedral for 8a, 8b, 10a, 10b. The molar conductance in DMF solution indicates that all complexes are electrolyte except 7a and 7b. The ESR spectra of solid copper(II) complexes in powder form showed an axial symmetry with (2)B1g as a ground state and hyperfine structure. The thermal stability and degradation of the ligands and their metal complexes were studied employing DTA and TG methods. The metal-free ligands and their copper(II) complexes were tested for their in vitro anticancer activity against human colon carcinoma (HT-29). The results showed that the synthesized copper(II) complexes exhibited higher anticancer activity than their free ligands. Of all the studied copper(II) complexes, the bromo-substituted complex 9b exhibited high anticancer activity at low micromolar inhibitory concentrations (IC50=0.58μM), compared to the other complexes and the free ligands.

  19. Transition metal complexes of neocryptolepine analogues. Part I: Synthesis, spectroscopic characterization, and invitro anticancer activity of copper(II) complexes

    NASA Astrophysics Data System (ADS)

    Emam, Sanaa Moustafa; El Sayed, Ibrahim El Tantawy; Nassar, Nagla

    2015-03-01

    New generation of copper(II) complexes with aminoalkylaminoneocryptolepine as bidentate ligands has been synthesized and it is characterized by elemental analyses, magnetic moment, spectra (IR, UV-Vis, 1H NMR and ESR) and thermal studies. The IR data suggest the coordination modes for ligands which behave as a bidentate with copper(II) ion. Based on the elemental analysis, magnetic studies, electronic and ESR data, binuclear square planar geometry was proposed for complexes 7a, 7b, square pyramidal for 9a, 9b and octahedral for 8a, 8b, 10a, 10b. The molar conductance in DMF solution indicates that all complexes are electrolyte except 7a and 7b. The ESR spectra of solid copper(II) complexes in powder form showed an axial symmetry with 2B1g as a ground state and hyperfine structure. The thermal stability and degradation of the ligands and their metal complexes were studied employing DTA and TG methods. The metal-free ligands and their copper(II) complexes were tested for their in vitro anticancer activity against human colon carcinoma (HT-29). The results showed that the synthesized copper(II) complexes exhibited higher anticancer activity than their free ligands. Of all the studied copper(II) complexes, the bromo-substituted complex 9b exhibited high anticancer activity at low micromolar inhibitory concentrations (IC50 = 0.58 μM), compared to the other complexes and the free ligands.

  20. Transition Metal Phosphide Hydroprocessing Catalysts: A review

    SciTech Connect

    Oyama, S.; Gott, T; Zhao, H; Lee, Y

    2009-01-01

    The diminishing quality of oil feedstocks coupled with increasingly more stringent environmental regulations limiting the content of sulfur in transportation fuels have given rise to a need for improved hydroprocessing technology. This review begins with a summary of the major improvements in hydrodesulfurization (HDS) and hydrodenitrogenation (HDN) catalysts and processes that have been reported in recent years. It then describes a new class of hydroprocessing catalysts, the transition metal phosphides, which have emerged as a promising group of high-activity, stable catalysts. The phosphides have physical properties resembling ceramics, so are strong and hard, yet retain electronic and magnetic properties similar to metals. Their crystal structures are based on trigonal prisms, yet they do not form layered structures like the sulfides. They display excellent performance in HDS and HDN, with the most active phosphide, Ni{sub 2}P, having activity surpassing that of promoted sulfides on the basis of sites titrated by chemisorption (CO for the phosphides, O{sub 2} for the sulfides). In the HDS of difficult heteroaromatics like 4,6-dimethyldibenzothiophene Ni{sub 2}P operates by the hydrogenation pathway, while in the HDN of substituted nitrogen compounds like 2-methylpiperidine it carries out nucleophilic substitution. The active sites for hydrogenation in Ni{sub 2}P have a square pyramidal geometry, while those for direct hydrodesulfurization have a tetrahedral geometry. Overall, Ni{sub 2}P is a promising catalyst for deep HDS in the presence of nitrogen and aromatic compounds.

  1. Two-State Reactivity in Low-Valent Iron-Mediated C-H Activation and the Implications for Other First-Row Transition Metals.

    PubMed

    Sun, Yihua; Tang, Hao; Chen, Kejuan; Hu, Lianrui; Yao, Jiannian; Shaik, Sason; Chen, Hui

    2016-03-23

    C-H bond activation/functionalization promoted by low-valent iron complexes has recently emerged as a promising approach for the utilization of earth-abundant first-row transition metals to carry out this difficult transformation. Herein we use extensive density functional theory and high-level ab initio coupled cluster calculations to shed light on the mechanism of these intriguing reactions. Our key mechanistic discovery for C-H arylation reactions reveals a two-state reactivity (TSR) scenario in which the low-spin Fe(II) singlet state, which is initially an excited state, crosses over the high-spin ground state and promotes C-H bond cleavage. Subsequently, aryl transmetalation occurs, followed by oxidation of Fe(II) to Fe(III) in a single-electron transfer (SET) step in which dichloroalkane serves as an oxidant, thus promoting the final C-C coupling and finalizing the C-H functionalization. Regeneration of the Fe(II) catalyst for the next round of C-H activation involves SET oxidation of the Fe(I) species generated after the C-C bond coupling. The ligand sphere of iron is found to play a crucial role in the TSR mechanism by stabilization of the reactive low-spin state that mediates the C-H activation. This is the first time that the successful TSR concept conceived for high-valent iron chemistry is shown to successfully rationalize the reactivity for a reaction promoted by low-valent iron complexes. A comparative study involving other divalent middle and late first-row transition metals implicates iron as the optimum metal in this TSR mechanism for C-H activation. It is predicted that stabilization of low-spin Mn(II) using an appropriate ligand sphere should produce another promising candidate for efficient C-H bond activation. This new TSR scenario therefore emerges as a new strategy for using low-valent first-row transition metals for C-H activation reactions.

  2. Transition metal-free decarboxylative alkylation reactions.

    PubMed

    Liu, Ping; Zhang, Guanghui; Sun, Peipei

    2016-11-22

    This review summarizes advances in the decarboxylative alkylation of carboxylic acids and their derivatives under transition metal-free conditions in recent years. Unlike most transition metal-catalyzed decarboxylative coupling reactions which tend to undergo catalytic cycles, the mechanisms of reactions under metal-free conditions are usually diverse and even ambiguous in some cases. This article offers an overview of reaction types and their corresponding mechanisms, highlights some of the advantages and limitations, and focuses on introducing UV and visible light-induced, organocatalyst and peroxide promoted radical processes for decarboxylative alkylation and the formation of C-C bonds.

  3. Method of boronizing transition metal surfaces

    DOEpatents

    Koyama, Koichiro; Shimotake, Hiroshi

    1983-01-01

    A method is presented for preparing a boride layer on a transition metal substrate for use in corrosive environments or as a harden surface in machine applications. This method is particularly useful in treating current collectors for use within a high temperature and corrosive electrochemical cell environment. A melt of a alkali metal boride tetrafluoride salt including such as KF to lower its melting point is prepared including a dissolved boron containing material, for instance NiB, MnB.sub.2, or CrB.sub.2. A transition metal to be coated is immersed in the melt at a temperature of no more than 700.degree. C. and a surface boride layer of that transition metal is formed within a period of about 24 hours on the substrate surface.

  4. Method of boronizing transition metal surfaces

    DOEpatents

    Koyama, Koichiro; Shimotake, Hiroshi.

    1983-08-16

    A method is presented for preparing a boride layer on a transition metal substrate for use in corrosive environments or as a harden surface in machine applications. This method is particularly useful in treating current collectors for use within a high temperature and corrosive electrochemical cell environment. A melt of a alkali metal boride tetrafluoride salt including such as KF to lower its melting point is prepared including a dissolved boron containing material, for instance NiB, MnB[sub 2], or CrB[sub 2]. A transition metal to be coated is immersed in the melt at a temperature of no more than 700 C and a surface boride layer of that transition metal is formed within a period of about 24 hours on the substrate surface. 4 figs.

  5. Transition metal contacts to graphene

    SciTech Connect

    Politou, Maria De Gendt, Stefan; Heyns, Marc; Asselberghs, Inge; Radu, Iuliana; Conard, Thierry; Richard, Olivier; Martens, Koen; Huyghebaert, Cedric; Tokei, Zsolt; Lee, Chang Seung; Sayan, Safak

    2015-10-12

    Achieving low resistance contacts to graphene is a common concern for graphene device performance and hybrid graphene/metal interconnects. In this work, we have used the circular Transfer Length Method (cTLM) to electrically characterize Ag, Au, Ni, Ti, and Pd as contact metals to graphene. The consistency of the obtained results was verified with the characterization of up to 72 cTLM structures per metal. Within our study, the noble metals Au, Ag and Pd, which form a weaker bond with graphene, are shown to result in lower contact resistance (Rc) values compared to the more reactive Ni and Ti. X-ray Photo Electron Spectroscopy and Transmission Electron Microscopy characterization for the latter have shown the formation of Ti and Ni carbides. Graphene/Pd contacts show a distinct intermediate behavior. The weak carbide formation signature and the low Rc values measured agree with theoretical predictions of an intermediate state of weak chemisorption of Pd on graphene.

  6. Transition Metal and Lanthanide Compounds.

    DTIC Science & Technology

    hexamethylbenzene niobium and tantalum derivatives; and lanthanide nitrate complexes of certain macrocyclic polyethers and the use of macrocyclic polyether columns for lanthanide separations....New research results in the following areas are briefly described: The synthesis of polyphosphines and their metal complexes including polyphosphines...with terminal methyl and neopentyl groups; reactions of polypyrazolylborates with the metal complexes C5H5Co(CO)(R(f)I(R(f)= perfluoroalkyl group

  7. An insight into fluorescent transition metal complexes.

    PubMed

    Chia, Y Y; Tay, M G

    2014-09-21

    The emission from transition metal complexes is usually produced from triplet excited states. Owing to strong spin-orbit coupling (SOC), the fast conversion of singlet to triplet excited states via intersystem crossing (ISC) is facilitated. Hence, in transition metal complexes, emission from singlet excited states is not favoured. Nevertheless, a number of examples of transition metal complexes that fluoresce with high intensity have been found and some of them were even comprehensively studied. In general, three common photophysical characteristics are used for the identification of fluorescent emission from a transition metal complex: emission lifetimes on the nanosecond scale; a small Stokes shift; and intense emission under aerated conditions. For most of the complexes reviewed here, singlet emission is the result of ligand-based fluorescence, which is the dominant emission process due to poor metal-ligand interactions leading to a small metal contribution in the excited states, and a competitive fluorescence rate constant when compared to the ISC rate constant. In addition to the pure fluorescence from metal complexes, another two types of fluorescent emissions were also reviewed, namely, delayed fluorescence and fluorescence-phosphorescence dual emissions. Both emissions also have their respective unique characteristics, and thus they are discussed in this perspective.

  8. Microwave-assisted synthesis of transition metal phosphide

    SciTech Connect

    Viswanathan, Tito

    2014-12-30

    A method of synthesizing transition metal phosphide. In one embodiment, the method has the steps of preparing a transition metal lignosulfonate, mixing the transition metal lignosulfonate with phosphoric acid to form a mixture, and subjecting the mixture to a microwave radiation for a duration of time effective to obtain a transition metal phosphide.

  9. Studies on DNA binding behaviour of biologically active transition metal complexes of new tetradentate N2O2 donor Schiff bases: Inhibitory activity against bacteria

    NASA Astrophysics Data System (ADS)

    Sobha, S.; Mahalakshmi, R.; Raman, N.

    A series of Cu(II), Ni(II) and Zn(II) complexes of the type ML have been synthesized with Schiff bases derived from o-acetoacetotoluidide, 2-hydroxybenzaldehyde and o-phenylenediamine/1,4-diaminobutane. The complexes are insoluble in common organic solvents but soluble in DMF and DMSO. The measured molar conductance values in DMSO indicate that the complexes are non-electrolytic in nature. All the six metal complexes have been fully characterized with the help of elemental analyses, molecular weights, molar conductance values, magnetic moments and spectroscopic data. The analytical data helped to elucidate the structure of the metal complexes. The Schiff bases are found to act as tetradentate ligands using N2O2 donor set of atoms leading to a square-planar geometry for the complexes around all the metal ions. The binding properties of metal complexes with DNA were investigated by absorption spectra, viscosity measurements and cyclic voltammetry. Detailed analysis reveals that the metal complexes intercalate into the DNA base stack as intercalators. All the metal complexes cleave the pUC19 DNA in presence of H2O2. The Schiff bases and their complexes have been screened for their antibacterial activity against five bacterial strains (Staphylococcus aureus, Pseudomonas aeruginosa, Escherichia coli, Staphylococcus epidermidis, Klebsiella pneumoniae) by disk diffusion method. All the metal complexes have potent biocidal activity than the free ligands.

  10. Studies on DNA binding behaviour of biologically active transition metal complexes of new tetradentate N2O2 donor Schiff bases: inhibitory activity against bacteria.

    PubMed

    Sobha, S; Mahalakshmi, R; Raman, N

    2012-06-15

    A series of Cu(II), Ni(II) and Zn(II) complexes of the type ML have been synthesized with Schiff bases derived from o-acetoacetotoluidide, 2-hydroxybenzaldehyde and o-phenylenediamine/1,4-diaminobutane. The complexes are insoluble in common organic solvents but soluble in DMF and DMSO. The measured molar conductance values in DMSO indicate that the complexes are non-electrolytic in nature. All the six metal complexes have been fully characterized with the help of elemental analyses, molecular weights, molar conductance values, magnetic moments and spectroscopic data. The analytical data helped to elucidate the structure of the metal complexes. The Schiff bases are found to act as tetradentate ligands using N(2)O(2) donor set of atoms leading to a square-planar geometry for the complexes around all the metal ions. The binding properties of metal complexes with DNA were investigated by absorption spectra, viscosity measurements and cyclic voltammetry. Detailed analysis reveals that the metal complexes intercalate into the DNA base stack as intercalators. All the metal complexes cleave the pUC19 DNA in presence of H(2)O(2.) The Schiff bases and their complexes have been screened for their antibacterial activity against five bacterial strains (Staphylococcus aureus, Pseudomonas aeruginosa, Escherichia coli, Staphylococcus epidermidis, Klebsiella pneumoniae) by disk diffusion method. All the metal complexes have potent biocidal activity than the free ligands.

  11. Spectroscopic characterization and biological activity of dihydrazone transition metal complexes: Crystal structure of 2,3-butanedione bis(isonicotinylhydrazone)

    NASA Astrophysics Data System (ADS)

    El-Sayed, Ahmed E. M.; Al-Fulaij, O. A.; Elaasar, A. A.; El-Defrawy, M. M.; El-Asmy, A. A.

    2015-01-01

    Metal complexes of the chloride, nitrate and acetate salts of Co(II), Ni(II) Cu(II), Zn(II), Cd(II) or Hg(II) with 2,3-butanedione bis(isonicotinylhydrazone) [BBINH] have been synthesized and structurally characterized. The crystal of BBINH was solved to crystallize as monoclinic system with space group of P121/c14. The formulae of the complexes were assigned based on the elemental analysis and mass spectra. The formation of BBINH complexes depend on the metal anion used. All complexes are nonelectrolytes except for the complexes 2, 3, 4 are (1:1) and 13 and 14 which are 1:2 electrolytes. BBINH behaves as a neutral tetradentate (N2O2) in the chloride complexes of Ni(II), Cu(II), Zn(II), Cd(II) and Hg(II). In [Co2(BBINH)(H2O)Cl3]ClṡH2O, BBINH has the same dentate but with the two Co(II) ions. In the acetate complexes, [Ni2(BBINH-2H)(H2O)2(OAc)2]ṡ3H2O and [Cu2(BBINH-2H)(OAc)2]ṡ5H2O, BBINH acts as a binegative tetradentate with the two metal ions. The ligand in the nitrate complexes acts as a neutral bidentate via the two hydrazone azomethine Cdbnd NHy; the nitrate ions are ionic in the Cd(II) and Zn(II) complexes and covalent in the Ni(II) complex. The data are supported by NMR (1H and 13C) spectra. The magnetic moments and electronic spectra of all complexes provide tetrahedral, square planar and/or octahedral structure. The decomposition of the complexes revealed the outer and inner solvents as well as the remaining residue based on TGA. The complexes have variable activities against some bacteria and fungi. The ligand is inactive against all tested organisms. The activity of Cd(II) and Hg(II) may be related to the geometry of the complexes.

  12. Electrocatalysis using transition metal carbide and oxide nanocrystals

    NASA Astrophysics Data System (ADS)

    Regmi, Yagya N.

    Carbides are one of the several families of transition metal compounds that are considered economic alternatives to catalysts based on noble metals and their compounds. Phase pure transition metal carbides of group 4-6 metals, in the first three periods, were synthesized using a common eutectic salt flux synthesis method, and their electrocatalytic activities compared under uniform electrochemical conditions. Mo2C showed highest hydrogen evolution reaction (HER) and oxygen reduction reaction (ORR) activities among the nine metal carbides investigated, but all other metal carbides also showed substantial activities. All the metal carbides showed remarkable enhancement in catalytic activities as supports, when compared to traditional graphitic carbon as platinum support. Mo2C, the most active transition metal carbide electrocatalyst, was prepared using four different synthesis routes, and the synthesis route dependent activities compared. Bifunctional Mo 2C that is HER as well as oxygen evolution reaction (OER) active, was achieved when the carbide was templated on a multiwalled carbon nanotube using carbothermic reduction method. Bimetallic carbides of Fe, Co, and Ni with Mo or W were prepared using a common carbothermic reduction method. Two different stoichiometries of bimetallic carbides were obtained for each system within a 60 °C temperature window. While the bimetallic carbides showed relatively lower electrocatalytic activities towards HER and ORR in comparison to Mo2C and WC, they revealed remarkably higher OER activities than IrO2 and RuO2, the state-of-the-art OER catalysts. Bimetallic oxides of Fe, Co, and Ni with Mo and W were also prepared using a hydrothermal synthesis method and they also revealed OER activities that are much higher than RuO2 and IrO2. Additionally, the OER activities were dependent on the degree and nature of hydration in the bimetallic oxide crystal lattice, with the completely hydrated, as synthesized, cobalt molybdate and nickel

  13. Nuclear Scattering from Transition Metals

    NASA Astrophysics Data System (ADS)

    Hira, Ajit; McKeough, James; Valerio, Mario; Cathey, Tommy

    2016-03-01

    In view of the continued interest in the scattering of light projectiles by metallic nuclei, we present a computational study of the interactions between different nuclear species of atoms such as H through F (Z <= 9) and the nuclei of Silver, Palladium and other metals. Recent work has shown that neutron scattering can be used to record holographic images of materials. We have developed a FORTRAN computer program to compute stopping cross sections and scattering angles in Ag and other metals for the small nuclear projectiles, using Monte Carlo calculation. This code allows for different angles of incidence. Next, simulations were done in the energy interval from 50 to 210 keV. The computational results thus obtained are compared with relevant experimental data. The data are further analyzed to identify periodic trends in terms of the atomic number of the projectile. Such studies also have potential applications in nuclear physics and in nuclear medicine. Funding from National Science Foundation.

  14. Ascorbate does not act as a pro-oxidant towards lipids and proteins in human plasma exposed to redox-active transition metal ions and hydrogen peroxide.

    PubMed

    Suh, Jung; Zhu, Ben-Zhan; Frei, Balz

    2003-05-15

    The combination of ascorbate, transition metal ions, and hydrogen peroxide (H(2)O(2)) is an efficient hydroxyl radical generating system called "the Udenfriend system." Although the pro-oxidant role of ascorbate in this system has been well characterized in vitro, it is uncertain whether ascorbate also acts as a pro-oxidant under physiological conditions. To address this question, human plasma, used as a representative biological fluid, was either depleted of endogenous ascorbate with ascorbate oxidase, left untreated, or supplemented with 25 microM-1 mM ascorbate. Subsequently, the plasma samples were incubated at 37 degrees C with 50 microM-1 mM iron (from ferrous ammonium sulfate), 60 or 100 microM copper (from cupric sulfate), and/or 200 microM or 1 mM H(2)O(2). Although endogenous and added ascorbate was depleted rapidly in the presence of transition metal ions and H(2)O(2), no cholesterol ester hydroperoxides or malondialdehyde were formed, i.e., ascorbate protected against, rather than promoted, lipid peroxidation. Conversely, depletion of endogenous ascorbate was sufficient to cause lipid peroxidation, the rate and extent of which were enhanced by the addition of metal ions but not H(2)O(2). Ascorbate also did not enhance protein oxidation in plasma exposed to metal ions and H(2)O(2), as assessed by protein carbonyl formation and depletion of reduced thiols. Interestingly, neither the rate nor the extent of endogenous alpha-tocopherol oxidation in plasma was affected by any of the treatments. Our data show that even in the presence of redox-active iron or copper and H(2)O(2), ascorbate acts as an antioxidant that prevents lipid peroxidation and does not promote protein oxidation in human plasma in vitro.

  15. Synthesis, spectral and thermal studies of some transition metal mixed ligand complexes: Modeling of equilibrium composition and biological activity

    NASA Astrophysics Data System (ADS)

    Neelakantan, M. A.; Sundaram, M.; Nair, M. Sivasankaran

    2011-09-01

    Several mixed ligand Ni(II), Cu(II) and Zn(II) complexes of 2-amino-3-hydroxypyridine (AHP) and imidazoles viz., imidazole (him), benzimidazole (bim), histamine (hist) and L-histidine (his) have been synthesized and characterized by elemental and spectral (vibrational, electronic, 1H NMR and EPR) data as well as by magnetic moment values. On the basis of elemental analysis and molar conductance values, all the complexes can be formulated as [MAB]Cl except histidine complexes as MAB. Thermogravimetric studies reveal the presence of coordinated water molecules in most of the complexes. From the magnetic measurements and electronic spectral data, octahedral structure was proposed for Ni(II) and Cu(II)-AHP-his, tetrahedral for Cu(II)-AHP-him/bim/hist, but square planar for the Cu(II)-AHP complex. The g∥/ A∥ calculated supports tetrahedral environment around the Cu(II) in Cu(II)-AHP-him/bim/hist and distorted octahedral for Cu(II)-AHP-his complexes. The morphology of the reported metal complexes was investigated by scanning electron micrographs (SEM). The potentiometric study has been performed in aqueous solution at 37 °C and I = 0.15 mol dm -3 NaClO 4. MABH, MAB and MAB 2 species has been identified in the present systems. Proton dissociation constants of AHP and stability constants of metal complexes were determined using MINIQUAD-75. The most probable structure of the mixed ligand species is discussed based upon their stability constants. The in vitro biological activity of the complexes was tested against the Gram positive and Gram negative bacteria, fungus and yeast. The oxidative DNA cleavage studies of the complexes were performed using gel electrophoresis method. Cu(II) complexes have been found to promote DNA cleavage in presence of biological reductant such as ascorbate and oxidant like hydrogen peroxide.

  16. How Accurate Can a Local Coupled Cluster Approach Be in Computing the Activation Energies of Late-Transition-Metal-Catalyzed Reactions with Au, Pt, and Ir?

    PubMed

    Kang, Runhua; Lai, Wenzhen; Yao, Jiannian; Shaik, Sason; Chen, Hui

    2012-09-11

    To improve the accuracy of local coupled cluster (LCC) methods in computing activation energies, we propose herein a new computational scheme. Its applications to various types of late-transition-metal-catalyzed reactions involving Au, Pt, and Ir indicate that the new corrective approach for LCC methods can downsize the mean unsigned deviation and maximum deviation, from the CCSD(T)/CBS reference, to about 0.3 and 0.9 kcal/mol. Using this method, we also calibrated the performance of popular density functionals, with respect to the same test set of reactions. It is concluded that the best functional is the general-purpose double hybrid functional B2GP-PLYP. Other well-performing functionals include the "kinetic" functionals M06-2X and BMK, which have a large percentage of HF exchange, and general-purpose functionals like PBE0 and wB97X. Comparatively, general-purpose functionals like PBE0 and TPSSh perform much better than the tested "kinetic" functionals for Pt-/Ir-catalyzed reactions, while the opposite is true for Au-catalyzed reactions. In contrast, wB97X performs more uniformly in these two classes of reactions. These findings hint that even within the scope of late transition metals, different types of reactions may require different types of optimal DFT methods. Empirical dispersion correction of DFT was found to have a small or no effect on the studied reactions barriers.

  17. Cascade morphology transition in bcc metals.

    PubMed

    Setyawan, Wahyu; Selby, Aaron P; Juslin, Niklas; Stoller, Roger E; Wirth, Brian D; Kurtz, Richard J

    2015-06-10

    Energetic atom collisions in solids induce shockwaves with complex morphologies. In this paper, we establish the existence of a morphological transition in such cascades. The order parameter of the morphology is defined as the exponent, b, in the defect production curve as a function of cascade energy (N(F) ~ E(MD)(b)). Response of different bcc metals can be compared in a consistent energy domain when the energy is normalized by the transition energy, μ, between the high- and the low-energy regime. Using Cr, Fe, Mo and W data, an empirical formula of μ as a function of displacement threshold energy, E(d), is presented for bcc metals.

  18. Mid-IR Transition Metal Lasers (Postprint)

    DTIC Science & Technology

    2007-01-01

    alexandrite was demonstrated in 1979. [2] Cr4+ and Cr2+ infrared laser materials took even longer to be discovered. However, transition metal laser...already been mentioned. Other transition metal laser ions such as Cr3+ in alexandrite [19] and Ti3+ in YAlO3 [20] have excited state absorption (ESA...Washington, DC. 19. Shand, M.L., J.C. Walling, and R.C. Morris, Excited-state absorption in the pump region of alexandrite , Journal of Applied Physics

  19. Stable isotopes of transition and post-transition metals as tracers in environmental studies

    USGS Publications Warehouse

    Bullen, Tomas D.; Baskaran, Mark

    2011-01-01

    The transition and post-transition metals, which include the elements in Groups 3–12 of the Periodic Table, have a broad range of geological and biological roles as well as industrial applications and thus are widespread in the environment. Interdisciplinary research over the past decade has resulted in a broad understanding of the isotope systematics of this important group of elements and revealed largely unexpected variability in isotope composition for natural materials. Significant kinetic and equilibrium isotope fractionation has been observed for redox sensitive metals such as iron, chromium, copper, molybdenum and mercury, and for metals that are not redox sensitive in nature such as cadmium and zinc. In the environmental sciences, the isotopes are increasingly being used to understand important issues such as tracing of metal contaminant sources and fates, unraveling metal redox cycles, deciphering metal nutrient pathways and cycles, and developing isotope biosignatures that can indicate the role of biological activity in ancient and modern planetary systems.

  20. Configuring bonds between first-row transition metals.

    PubMed

    Eisenhart, Reed J; Clouston, Laura J; Lu, Connie C

    2015-11-17

    Alfred Werner, who pioneered the field of coordination chemistry, envisioned coordination complexes as a single, transition metal atom at the epicenter of a vast ligand space. The idea that the locus of a coordination complex could be shared by multiple metals held together with covalent bonds would eventually lead to the discovery of the quadruple and quintuple bond, which have no analogues outside of the transition metal block. Metal-metal bonding can be classified into homometallic and heterometallic groups. Although the former is dominant, the latter is arguably more intriguing because of the inherently larger chemical space in which metal-metal bonding can be explored. In 2013, Lu and Thomas independently reported the isolation of heterometallic multiple bonds with exclusively first-row transition metals. Structural and theoretical data supported triply bonded Fe-Cr and Fe-V cores. This Account describes our continued efforts to configure bonds between first-row transition metals from titanium to copper. Double-decker ligands, or binucleating platforms that brace two transition metals in proximity, have enabled the modular synthesis of diverse metal-metal complexes. The resulting complexes are also ideal for investigating the effects of an "ancillary" metal on the properties and reactivities of an "active" metal center. A total of 38 bimetallic complexes have been compiled comprising 18 unique metal-metal pairings. Twenty-one of these bimetallics are strictly isostructural, allowing for a systematic comparison of metal-metal bonding. The nature of the chemical bond between first-row metals is remarkably variable and depends on two primary factors: the total d-electron count, and the metals' relative d-orbital energies. Showcasing the range of covalent bonding are a quintuply bonded (d-d)(10) Mn-Cr heterobimetallic and the singly bonded late-late pairings, e.g., Fe-Co, which adopt unusually high spin states. A long-term goal is to rationally tailor the

  1. Synthesis and characterization of norfloxacin-transition metal complexes (group 11, IB): Spectroscopic, thermal, kinetic measurements and biological activity

    NASA Astrophysics Data System (ADS)

    Refat, Moamen S.

    2007-12-01

    The investigation of the new structures of Ag(I), Cu(II) and Au(III) complexes, [Ag 2(Nor) 2](NO 3) 2, [Cu(Nor) 2(H 2O) 2]SO 4·5H 2O and [Au(Nor) 2 (H 2O) 2]Cl 3 (where, Nor = norfloxacin) was done during the reaction of silver(I), copper(II) and gold(III) ions with norfloxacin drug ligand. Elemental analysis of CHN, infrared, electronic, 1H NMR and mass spectra, as well as thermo gravimetric analysis (TG and DTG) and conductivity measurements have been used to characterize the isolated complexes. The powder XRD studies confirm the amorphous nature of the complexes. The norfloxacin ligand is coordinated to Ag(I) and Au(III) ions as a neutral monodentate chelating through the N atom of piperidyl ring, but the copper(II) complex is coordinated through the carbonyl oxygen atom (quinolone group) and the oxygen atom of the carboxylic group. The norfloxacin and their metal complexes have been biologically tested, which resulted in norfloxacin complexes showing moderate activity against the gram positive and gram negative bacteria as well as against fungi.

  2. Binding and catalytic reduction of NO by transition metal aluminosilicates

    SciTech Connect

    Klier, K.; Herman, R.G.; Hou, Shaolie.

    1991-09-01

    The objective of this research is to provide the scientific understanding of processes that actively and selectively reduce NO in dilute exhaust streams, as well as in concentrated streams, to N{sub 2}. Experimental studies of NO chemistry in transition metal-containing aluminosilicate catalysts are being carried out with the aim of determining the chemical rules for NO reduction on non-precious metals. The catalyst supports chosen for this investigation are A and Y zeolites, mordenite, and monoliths based on cordierite. The supported transition metal cations that were examined are principally the first row redox metals, e.g. Cr(2), Mn(II), Fe(II), Co(II), Ni(II), Cu(II), and Cu(I). The reactions of interest are the reductions of NO by H{sub 2}, CO, and CH{sub 4}, as well as the disproportionation of NO. Rare earth cations that possess redox properties were placed in the more shielded sites, e.g. Site I in Y zeolite, prior to or simultaneously with the exchange procedure with the transition metal cations. Theoretical calculations of the electronic structure of the transition metal cations in zeolitic sites were carried out by ab initio methods. The aim of this part of the research is to find the best match between the metal-based antibonding orbitals and the antibonding orbitals of the NO molecule such that the N-O bond is weakened and is readily broken. 9 refs., 4 figs., 3 tabs.

  3. Metal oxide chemistry in solution: the early transition metal polyoxoanions.

    PubMed

    Day, V W; Klemperer, W G

    1985-05-03

    Many of the early transition elements form large polynuclear metal-oxygen anions containing up to 200 atoms or more. Although these polyoxoanions have been investigated for more than a century, detailed studies of structure and reactivity were not possible until the development of modern x-ray crystallographic and nuclear magnetic resonance spectroscopic techniques. Systematic studies of small polyoxoanions in inert, aprotic solvents have clarified many of the principles governing their structure and reactivity, and also have made possible the preparation of entirely new types of covalent derivatives such as CH(2)Mo(4)O(15)H(3-), C(5)H(5)TiMo(5)O(18)(3-), and (OC)(3)Mn(Nb(2)W(4)O(19))(3-). Since most early transition metal polyoxoanions have structures based on close-packed oxygen arrays containing interstitial metal centers, their chemistry offers a rare opportunity to study chemical transformations in detail on well-defined metal oxide surfaces.

  4. Dimensional diversity in transition metal trihalides

    SciTech Connect

    Jianhua Lin; Miller, G.J. )

    1993-04-14

    Structural variations of the second- and third-row transition metal trihalides are rationalized via tight-binding band calculations and evaluation of Madelung energetic factors. The observed structure for a given metal halide is controlled by both the coordination geometry at the anion and the d electron configuration at the metal. As the polarizability of the halide increases, the M-X-M angle, in general, decreases so that three-dimensional frameworks occur for the fluorides, while layer and chain structures are found for the chlorides, bromides, and iodides. Within a particular halide system, systematic structural trends also occur as the d electron configuration changes. 56 refs., 23 figs., 4 tabs.

  5. OH-transition metal bonding

    NASA Technical Reports Server (NTRS)

    Bauschlicher, Charles W., Jr.

    1986-01-01

    The bonding in both CuOH and AgOH has a covalent component that leads to a bent structure. The larger electrostatic stabilization in CuOH leads to a larger D(e) (2.83 eV) compared with AgOH (2.20 eV). Using Ni5OH to model chemisorption of OH on a Ni surface, it is found that OH adsorption in the fourfold hollow of Ni(100) leads to an OH normal to the surface, while adsorption directly above a Ni atom leads to a tilted OH. These qualitative Ni5OH calculations allow for speculation on the observed variation of OH on metal surfaces.

  6. High Pressure Synthesis of Transition Metal Carbonyls.

    ERIC Educational Resources Information Center

    Hagen, A. P.; And Others

    1979-01-01

    Presents an experiment which uses readily available starting materials and inexpensive equipment for synthesis of transition metal carbonyls at 1000 atm and which is intended to give students experience in techniques used in research and industry. Safety precautions are emphasized. (Author/SA)

  7. Mesoporous Transition Metal Oxides for Supercapacitors

    PubMed Central

    Wang, Yan; Guo, Jin; Wang, Tingfeng; Shao, Junfeng; Wang, Dong; Yang, Ying-Wei

    2015-01-01

    Recently, transition metal oxides, such as ruthenium oxide (RuO2), manganese dioxide (MnO2), nickel oxides (NiO) and cobalt oxide (Co3O4), have been widely investigated as electrode materials for pseudo-capacitors. In particular, these metal oxides with mesoporous structures have become very hot nanomaterials in the field of supercapacitors owing to their large specific surface areas and suitable pore size distributions. The high specific capacities of these mesoporous metal oxides are resulted from the effective contacts between electrode materials and electrolytes as well as fast transportation of ions and electrons in the bulk of electrode and at the interface of electrode and electrolyte. During the past decade, many achievements on mesoporous transition metal oxides have been made. In this mini-review, we select several typical nanomaterials, such as RuO2, MnO2, NiO, Co3O4 and nickel cobaltite (NiCo2O4), and briefly summarize the recent research progress of these mesoporous transition metal oxides-based electrodes in the field of supercapacitors. PMID:28347088

  8. Orbital physics in transition-metal oxides

    PubMed

    Tokura; Nagaosa

    2000-04-21

    An electron in a solid, that is, bound to or nearly localized on the specific atomic site, has three attributes: charge, spin, and orbital. The orbital represents the shape of the electron cloud in solid. In transition-metal oxides with anisotropic-shaped d-orbital electrons, the Coulomb interaction between the electrons (strong electron correlation effect) is of importance for understanding their metal-insulator transitions and properties such as high-temperature superconductivity and colossal magnetoresistance. The orbital degree of freedom occasionally plays an important role in these phenomena, and its correlation and/or order-disorder transition causes a variety of phenomena through strong coupling with charge, spin, and lattice dynamics. An overview is given here on this "orbital physics," which will be a key concept for the science and technology of correlated electrons.

  9. Syntheses of transition metal methoxysiloxides.

    PubMed

    Richers, Casseday P; Bertke, Jeffery A; Rauchfuss, Thomas B

    2017-01-31

    The paper describes three methods for the preparation of methoxysiloxide complexes, a rare class of complexes of relevance to room temperature vulcanization (RTV) of polysiloxanes. The salt metathesis reaction involves the use of the recently described reagent NaOSi(OMe)2Me with various metal chlorides to give Cp*2Ti[OSi(OMe)2Me](OMe), ((Me,Me)N2N)NiOSi(OMe)2Me, (IPr)CuOSi(OMe)2Me, and (triphos)CoOSi(OMe)2Me (Cp* = C5Me5, triphos = Me(CH2PPh2)3). Several attempted reactions gave methoxide complexes instead, a pathway that is attributed to the intermediacy of κ(2)-OSi(OMe)2Me species. The diol Cp*2Zr(OH)2 reacts with excess (MeO)3SiMe to give Cp*2Zr[OSi(OMe)2Me]2. In contrast the less nucleophilic Cp*2Ti(OH)2 was unreactive. The third route to methoxysiloxide complexes involves the reaction of Cp*2M(O)(py) with (MeO)3SiMe to give Cp*2M[OSi(OMe)2Me](OMe) in nearly quantitative yield (M = Ti, Zr). The structures of Cp*2Ti[OSi(OMe)2Me](OMe), Cp*2Zr[OSi(OMe)2Me](OMe), (IPr)CuOSi(OMe)2Me, and (triphos)CoOSi(OMe)2Me were confirmed by single crystal X-ray diffraction.

  10. Self-assembly of noble metal monolayers on transition metal carbide nanoparticle catalysts.

    PubMed

    Hunt, Sean T; Milina, Maria; Alba-Rubio, Ana C; Hendon, Christopher H; Dumesic, James A; Román-Leshkov, Yuriy

    2016-05-20

    We demonstrated the self-assembly of transition metal carbide nanoparticles coated with atomically thin noble metal monolayers by carburizing mixtures of noble metal salts and transition metal oxides encapsulated in removable silica templates. This approach allows for control of the final core-shell architecture, including particle size, monolayer coverage, and heterometallic composition. Carbon-supported Ti(0.1)W(0.9)C nanoparticles coated with Pt or bimetallic PtRu monolayers exhibited enhanced resistance to sintering and CO poisoning, achieving an order of magnitude increase in specific activity over commercial catalysts for methanol electrooxidation after 10,000 cycles. These core-shell materials provide a new direction to reduce the loading, enhance the activity, and increase the stability of noble metal catalysts.

  11. Transition Metal-Involved Photon Upconversion.

    PubMed

    Ye, Shi; Song, En-Hai; Zhang, Qin-Yuan

    2016-12-01

    Upconversion (UC) luminescence of lanthanide ions (Ln(3+)) has been extensively investigated for several decades and is a constant research hotspot owing to its fundamental significance and widespread applications. In contrast to the multiple and fixed UC emissions of Ln(3+), transition metal (TM) ions, e.g., Mn(2+), usually possess a single broadband emission due to its 3d(5) electronic configuration. Wavelength-tuneable single UC emission can be achieved in some TM ion-activated systems ascribed to the susceptibility of d electrons to the chemical environment, which is appealing in molecular sensing and lighting. Moreover, the UC emissions of Ln(3+) can be modulated by TM ions (specifically d-block element ions with unfilled d orbitals), which benefits from the specific metastable energy levels of Ln(3+) owing to the well-shielded 4f electrons and tuneable energy levels of the TM ions. The electric versatility of d(0) ion-containing hosts (d(0) normally viewed as charged anion groups, such as MoO6(6-) and TiO4(4-)) may also have a strong influence on the electric dipole transition of Ln(3+), resulting in multifunctional properties of modulated UC emission and electrical behaviour, such as ferroelectricity and oxide-ion conductivity. This review focuses on recent advances in the room temperature (RT) UC of TM ions, the UC of Ln(3+) tuned by TM or d(0) ions, and the UC of d(0) ion-centred groups, as well as their potential applications in bioimaging, solar cells and multifunctional devices.

  12. Yield stress in metallic glasses: The jamming-unjamming transition studied through Monte Carlo simulations based on the activation-relaxation technique

    SciTech Connect

    Rodney, David; Schuh, Christopher A.

    2009-11-01

    A Monte Carlo approach allowing for stress control is employed to study the yield stress of a two-dimensional metallic glass in the limit of low temperatures and long (infinite) time scales. The elementary thermally activated events are determined using the activation-relaxation technique (ART). By tracking the minimum-energy state of the glass for various applied stresses, we find a well-defined jamming-unjamming transition at a yield stress about 30% lower than the steady-state flow stress obtained in conventional strain-controlled quasistatic simulations. ART is then used to determine the evolution of the distribution of thermally activated events in the glass microstructure both below and above the yield stress. We show that aging below the yield stress increases the stability of the glass, both thermodynamically (the internal potential energy decreases) and dynamically (the aged glass is surrounded by higher-energy barriers than the initial quenched configuration). In contrast, deformation above the yield stress brings the glass into a high internal potential energy state that is only marginally stable, being surrounded by a high density of low-energy barriers. The strong influence of deformation on the glass state is also evidenced by the microstructure polarization, revealed here through an asymmetry of the distribution of thermally activated inelastic strains in glasses after simple shear deformation.

  13. Spin doping using transition metal phthalocyanine molecules

    NASA Astrophysics Data System (ADS)

    Atxabal, A.; Ribeiro, M.; Parui, S.; Urreta, L.; Sagasta, E.; Sun, X.; Llopis, R.; Casanova, F.; Hueso, L. E.

    2016-12-01

    Molecular spins have become key enablers for exploring magnetic interactions, quantum information processes and many-body effects in metals. Metal-organic molecules, in particular, let the spin state of the core metal ion to be modified according to its organic environment, allowing localized magnetic moments to emerge as functional entities with radically different properties from its simple atomic counterparts. Here, using and preserving the integrity of transition metal phthalocyanine high-spin complexes, we demonstrate the magnetic doping of gold thin films, effectively creating a new ground state. We demonstrate it by electrical transport measurements that are sensitive to the scattering of itinerant electrons with magnetic impurities, such as Kondo effect and weak antilocalization. Our work expands in a simple and powerful way the classes of materials that can be used as magnetic dopants, opening a new channel to couple the wide range of molecular properties with spin phenomena at a functional scale.

  14. Spin doping using transition metal phthalocyanine molecules

    PubMed Central

    Atxabal, A.; Ribeiro, M.; Parui, S.; Urreta, L.; Sagasta, E.; Sun, X.; Llopis, R.; Casanova, F.; Hueso, L. E.

    2016-01-01

    Molecular spins have become key enablers for exploring magnetic interactions, quantum information processes and many-body effects in metals. Metal-organic molecules, in particular, let the spin state of the core metal ion to be modified according to its organic environment, allowing localized magnetic moments to emerge as functional entities with radically different properties from its simple atomic counterparts. Here, using and preserving the integrity of transition metal phthalocyanine high-spin complexes, we demonstrate the magnetic doping of gold thin films, effectively creating a new ground state. We demonstrate it by electrical transport measurements that are sensitive to the scattering of itinerant electrons with magnetic impurities, such as Kondo effect and weak antilocalization. Our work expands in a simple and powerful way the classes of materials that can be used as magnetic dopants, opening a new channel to couple the wide range of molecular properties with spin phenomena at a functional scale. PMID:27941810

  15. Spin doping using transition metal phthalocyanine molecules.

    PubMed

    Atxabal, A; Ribeiro, M; Parui, S; Urreta, L; Sagasta, E; Sun, X; Llopis, R; Casanova, F; Hueso, L E

    2016-12-12

    Molecular spins have become key enablers for exploring magnetic interactions, quantum information processes and many-body effects in metals. Metal-organic molecules, in particular, let the spin state of the core metal ion to be modified according to its organic environment, allowing localized magnetic moments to emerge as functional entities with radically different properties from its simple atomic counterparts. Here, using and preserving the integrity of transition metal phthalocyanine high-spin complexes, we demonstrate the magnetic doping of gold thin films, effectively creating a new ground state. We demonstrate it by electrical transport measurements that are sensitive to the scattering of itinerant electrons with magnetic impurities, such as Kondo effect and weak antilocalization. Our work expands in a simple and powerful way the classes of materials that can be used as magnetic dopants, opening a new channel to couple the wide range of molecular properties with spin phenomena at a functional scale.

  16. Impact Electrochemistry of Layered Transition Metal Dichalcogenides.

    PubMed

    Lim, Chee Shan; Tan, Shu Min; Sofer, Zdeněk; Pumera, Martin

    2015-08-25

    Layered transition metal dichalcogenides (TMDs) exhibit paramount importance in the electrocatalysis of the hydrogen evolution reaction. It is crucial to determine the size of the electrocatalytic particles as well as to establish their electrocatalytic activity, which occurs at the edges of these particles. Here, we show that individual TMD (MoS2, MoSe2, WS2, or WSe2; in general MX2) nanoparticles impacting an electrode surface provide well-defined current "spikes" in both the cathodic and anodic regions. These spikes originate from direct oxidation of the nanoparticles (from M(4+) to M(6+)) at the anodic region and from the electrocatalytic currents generated upon hydrogen evolution in the cathodic region. The positive correlation between the frequency of the impacts and the concentration of TMD nanoparticles is also demonstrated here, enabling determination of the concentration of TMD nanoparticles in colloidal form. In addition, the size of individual TMD nanoparticles can be evaluated using the charge passed during every spike. The capability of detecting both the "indirect" catalytic effect of an impacting TMD nanoparticle as well as "direct" oxidation indicates that the frequency of impacts in both the "indirect" and "direct" scenarios are comparable. This suggests that all TMD nanoparticles, which are electrochemically oxidizable (thus capable of donating electrons to electrodes), are also capable of catalyzing the hydrogen reduction reaction.

  17. Synthesis, spectroscopic, coordination and biological activities of some transition metal complexes containing ONO tridentate Schiff base ligand.

    PubMed

    Belal, A A M; El-Deen, I M; Farid, N Y; Zakaria, Rosan; Refat, Moamen S

    2015-01-01

    The main target of this paper is to get an interesting data for the preparation and characterizations of metal oxide (MO) nanoparticles using H2L Schiff base complexes as precursors through the thermal decomposition procedure. Five Schiff base complexes of Mn(II), Co(II), Ni(II), Cu(II) and Zn(II) metal ions were synthesized from 2-[(2-hydroxy-naphthalen-1-ylmethylene)-amino]-benzoic acid new adduct (H2L). Theses complexes were characterized using infrared, electronic, mass and (1)H NMR spectroscopic techniques. The elemental analysis data was confirmed that the stoichiometry of (metal:H2L) is 1:1 molar ratio. The molar conductance indicates that all of complexes are non electrolytic. The general chemical formulas of these complexes is [M(L)(NH3)]·nH2O. All complexes are tetrahedral geometry. The thermal decomposition behavior of H2L hydrated and anhydrous complexes has been discussed using thermogravimetric analysis (TG/DTG) and differential thermal analyses (DTA) under nitrogen atmosphere. The crystalline phases of the reaction products were checked using X-ray diffractometer (XRD) and scanning electron microscopy (SEM).

  18. Metal Induced Growth of Transition Metal Dichalcogenides at Controlled Locations

    PubMed Central

    Wang, Zhendong; Huang, Qi; Chen, Peng; Guo, Shouhui; Liu, Xiaoqing; Liang, Xuelei; Wang, Li

    2016-01-01

    Metal induced nucleation is adopted to achieve the growth of transition metal dichalcogenides at controlled locations. Ordered arrays of MoS2 and WS2 have successfully been fabricated on SiO2 substrates by using the patterned Pt/Ti dots as the nucleation sites. Uniform MoS2 monolayers with the adjustable size up to 50 μm are grown surrounding these metal patterns and the mobility of such layer is about 0.86 cm2/V·s. The crystalline flakes of WS2 are also fabricated extending from the metal patterns and the electron mobility of these flakes is up to 11.36 cm2/V·s. PMID:27910917

  19. Insulator to Metal Transition in Fluid Hydrogen

    SciTech Connect

    Hood, R Q; Galli, G

    2003-06-15

    The authors have investigated the insulator to metal transition (ITM) in fluid hydrogen using first principles simulations. Both density functional and quantum Monte Carlo calculations show that the electronic energy gap of the liquid vanishes at about 9 fold compression and 3000 K. At these conditions the computed conductivity values are characteristic of a poor metal. These findings are consistent with those of recent shock wave experiments but the computed conductivity is larger than the measured value. From the ab-initio results they conclude that the ITM is driven by molecular dissociation rather than disorder and that both temperature and pressure play a key role in determining structural changes in the fluid.

  20. (Electronic structure and reactivities of transition metal clusters)

    SciTech Connect

    Not Available

    1992-01-01

    The following are reported: theoretical calculations (configuration interaction, relativistic effective core potentials, polyatomics, CASSCF); proposed theoretical studies (clusters of Cu, Ag, Au, Ni, Pt, Pd, Rh, Ir, Os, Ru; transition metal cluster ions; transition metal carbide clusters; bimetallic mixed transition metal clusters); reactivity studies on transition metal clusters (reactivity with H{sub 2}, C{sub 2}H{sub 4}, hydrocarbons; NO and CO chemisorption on surfaces). Computer facilities and codes to be used, are described. 192 refs, 13 figs.

  1. Magnetic and Metal-Insulator Transition in natural Transition Metal Sulfides

    NASA Astrophysics Data System (ADS)

    Wang, Renxiong; Metz, Tristin; Liu, I.-Lin; Wang, Kefeng; Wang, Xiangfeng; Jeffries, J. R.; Saha, S. R.; Greene, R. L.; Paglione, J.; Santelli, C. C.; Post, J.,

    In collaboration with the Smithsonian Institution's National Museum of Natural History, we present detailed studies of a class of natural minerals with potential to harbor correlated behavior. Transition metal sulfide minerals, such as Bornite (Cu5FeS4), are an important family of compounds known for their thermoelectric properties. We will present low temperature experimental studies of magnetic transitions and focus on a compound that exhibits a metal to insulator transition concident with entrance to an antiferromagnetic ground state, suggesting a potentially interesting system with promise for realizing new correlated states of matter in a naturally occurring mineral.

  2. Transitional Metal/Chalcogen Dependant Interactions of Hairpin DNA with Transition Metal Dichalcogenides, MX2.

    PubMed

    Loo, Adeline Huiling; Bonanni, Alessandra; Sofer, Zdenek; Pumera, Martin

    2015-08-03

    Owing to the attractive properties that transition metal dichalcogenides (TMDs) display, they have found recent application in the fabrication of biosensing devices. These devices involve the immobilization of a recognition element such as DNA onto the surface of TMDs. Therefore, it is imperative to examine the interactions between TMDs and DNA. Herein, we explore the effect of different transition metals (Mo and W) and chalcogens (S and Se) on the interactions between hairpin DNA and TMDs of both bulk and t-BuLi exfoliated forms. We discovered that the interactions are strongly dependent on the metal/chalcogen composition in TMDs.

  3. Cascade morphology transition in bcc metals

    DOE PAGES

    Setyawan, Wahyu; Selby, Aaron P.; Juslin, Niklas; ...

    2015-01-01

    Energetic atom collisions in solids induce shockwaves with complex morphologies. In this paper, we establish the existence of a morphological transition in such cascades. The order parameter of the morphology is defined as the exponent, b, in the defect production curve as a function of cascade energy (N-F similar to E-MD(b)). Response of different bcc metals can be compared in a consistent energy domain when the energy is normalized by the transition energy, mu, between the high-and the low-energy regime. Using Cr, Fe, Mo and W data, an empirical formula of mu as a function of displacement threshold energy, E-d,more » is presented for bcc metals.« less

  4. Cascade morphology transition in bcc metals

    SciTech Connect

    Setyawan, Wahyu; Selby, A.; Juslin, Niklas; Stoller, Roger E.; Wirth, Brian D.; Kurtz, Richard J.

    2015-06-10

    Energetic atom collisions in solids induce shockwaves with complex morphologies. In this paper, we establish the existence of a morphological transition in such cascades. The order parameter of the morphology is defined as the exponent, $b$, in the defect production curve as a function of cascade energy ($N_F$$ \\sim$$E_{MD}^b$). Response of different bcc metals can be compared in a consistent energy domain when the energy is normalized by the transition energy, $\\mu$, between the high- and the low-energy regime. Using Cr, Fe, Mo and W data, an empirical formula of $\\mu$ as a function of displacement threshold energy, $E_d$, is presented for bcc metals.

  5. Cascade morphology transition in bcc metals

    SciTech Connect

    Setyawan, Wahyu; Selby, Aaron P.; Juslin, Niklas; Stoller, Roger E.; Wirth, Brian D.; Kurtz, Richard J.

    2015-01-01

    Energetic atom collisions in solids induce shockwaves with complex morphologies. In this paper, we establish the existence of a morphological transition in such cascades. The order parameter of the morphology is defined as the exponent, b, in the defect production curve as a function of cascade energy (N-F similar to E-MD(b)). Response of different bcc metals can be compared in a consistent energy domain when the energy is normalized by the transition energy, mu, between the high-and the low-energy regime. Using Cr, Fe, Mo and W data, an empirical formula of mu as a function of displacement threshold energy, E-d, is presented for bcc metals.

  6. Transition-Metal Substitution Doping in Synthetic Atomically Thin Semiconductors.

    PubMed

    Gao, Jian; Kim, Young Duck; Liang, Liangbo; Idrobo, Juan Carlos; Chow, Phil; Tan, Jiawei; Li, Baichang; Li, Lu; Sumpter, Bobby G; Lu, Toh-Ming; Meunier, Vincent; Hone, James; Koratkar, Nikhil

    2016-11-01

    Large-area "in situ" transition-metal substitution doping for chemical-vapor-deposited semiconducting transition-metal-dichalcogenide monolayers deposited on dielectric substrates is demonstrated. In this approach, the transition-metal substitution is stable and preserves the monolayer's semiconducting nature, along with other attractive characteristics, including direct-bandgap photoluminescence.

  7. [Near-infrared photoluminescence properties of natural sodalite activated with Mn and Fe transition metal ions doping].

    PubMed

    Aidilibike, Tuerxun; Asilibieke, Bahetiguli; Sidike, Aierken

    2013-11-01

    Na8Al6Si6O24Cl2 : Mn and Na8Al6Si6O24Cl2 : Fe NIR phosphors were prepared by a solid-solid reaction at high temperature. Their crystal structures of fluorescent powder were investigated by using X-ray powder diffraction (XRD), and their NIR emission spectrum and excitation spectrum were measured at room temperature. The main emission peak of Mn5+ in the Na8Al6Si6O24Cl2 : Mn phosphor was observed at 1 200 nm in the NIR spectral region under 400 or 602 nm excitation, attributing to the 3A2-3T2 and 3A2-1E transitions of Mn5+ ions. The characteristic NIR luminescence of Mn5+ in sodalite is greatly enhanced by co-doping manganese and sulfur. A mechanism of the energy transfer between S2(-) and Mn5+ was also proposed here. The main emission peak of Fe2+ ions in the Na8Al6Si6O24Cl2 : Fe phosphor was recorded at 1 000 nm in the NIR region under the excitation of 334 or 500 nm. This photoluminescence originated from the 3T1-5 E transition of Fe2+. Such an emission in the NIR region suggests a potential application in improving solar spectrum to enhance the efficiency of silicon solar cells.

  8. Lanthanoid-transition-metal bonding in bismetallocenes.

    PubMed

    Butovskii, Mikhail V; Oelkers, Benjamin; Bauer, Tobias; Bakker, Jacinta M; Bezugly, Viktor; Wagner, Frank R; Kempe, Rhett

    2014-03-03

    Bismetallocenes [Cp2 LuReCp2 ] and [Cp*2 LaReCp2 ] (Cp=cyclopentadienyl; Cp*=pentamethylcyclopentadienyl) were prepared using different synthetic strategies. Salt metathesis-performed in aromatic hydrocarbons to avoid degradation pathways caused by THF-were identified as an attractive alternative to alkane elimination. Although alkane elimination is more attractive in the sense of its less elaborate workup, the rate of the reaction shows a strong dependence on the ionic radius of Ln(3+) (Ln=lanthanide) within a given ligand set. Steric hindrance can cause a dramatic decrease in the reaction rate of alkane elimination. In this case, salt metathesis should be considered the better alternative. Covalent bonding interactions between the Ln and transition-metal (TM) cations has been quantified on the basis of the delocalization index. Its magnitude lies within the range characteristic for bonds between transition metals. Secondary interactions were identified between carbon atoms of the Cp ligand of the transition metal and the Ln cation. Model calculations clearly indicated that the size of these interactions depends on the capability of the TM atom to act as an electron donor (i.e., a Lewis base). The consequences can even be derived from structural details. The observed clear dependency of the LuRu and interfragment LuC bonding on the THF coordination of the Lu atom points to a tunable Lewis acidity at the Ln site, which provides a method of significantly influencing the structure and the interfragment bonding.

  9. Corrosion behavior of mesoporous transition metal nitrides

    SciTech Connect

    Yang, Minghui; Allen, Amy J.; Nguyen, Minh T.; Ralston, Walter T.; MacLeod, Michelle J.; DiSalvo, Francis J.

    2013-09-15

    Transition metal nitrides (TMN) have many desirable characteristics such as high hardness and good thermal stability under reducing conditions. This work reports an initial survey of the chemical stability of mesoporous TMNs (TM=Nb, V, Cr and Ti) in water at 80 °C at neutral, acidic and alkaline pH. The mesoporous TMNs had specific surface areas of 25–60 m{sup 2}/g with average pore sizes ranging from 10 to 50 nm. The high surface areas of these materials enhance the rate of corrosion per unit mass over that of a bulk material, making detection of corrosion much easier. The products were characterized by Rietveld refinement of powder X-ray diffraction (PXRD) patterns and by scanning electron microscopy (SEM). Several nitrides have corrosion rates that are, within error, not distinguishable from zero (±1 Å/day). Of the nitrides examined, CrN appears to be the most corrosion resistant under acidic conditions. None of the nitrides studied are corrosion resistant under alkaline conditions. - Graphical abstract: Corrosion behavior of mesoporous transition metal nitrides (TM=Nb, V, Cr and Ti) in acidic and alkaline solutions at 80 °C for 2 weeks. Display Omitted - highlights: • Corrosion rates of mesoporous transition metal nitrides in aqueous solution is reported. • The mesoporous TMNs had surface areas of 25–60 m{sup 2}/g. • CrN is the most corrosion resistant under the conditions studied.

  10. Ferroelectric control of metal-insulator transition

    NASA Astrophysics Data System (ADS)

    He, Xu; Jin, Kui-juan; Ge, Chen; Ma, Zhong-shui; Yang, Guo-zhen

    2016-03-01

    We propose a method of controlling the metal-insulator transition of one perovskite material at its interface with another ferroelectric material based on first principle calculations. The operating principle is that the rotation of oxygen octahedra tuned by the ferroelectric polarization can modulate the superexchange interaction in this perovskite. We designed a tri-color superlattice of (BiFeO3)N/LaNiO3/LaTiO3, in which the BiFeO3 layers are ferroelectric, the LaNiO3 layer is the layer of which the electronic structure is to be tuned, and LaTiO3 layer is inserted to enhance the inversion asymmetry. By reversing the ferroelectric polarization in this structure, there is a metal-insulator transition of the LaNiO3 layer because of the changes of crystal field splitting of the Ni eg orbitals and the bandwidth of the Ni in-plane eg orbital. It is highly expected that a metal-transition can be realized by designing the structures at the interfaces for more materials.

  11. Thermodynamic Hydricity of Transition Metal Hydrides.

    PubMed

    Wiedner, Eric S; Chambers, Matthew B; Pitman, Catherine L; Bullock, R Morris; Miller, Alexander J M; Appel, Aaron M

    2016-08-10

    Transition metal hydrides play a critical role in stoichiometric and catalytic transformations. Knowledge of free energies for cleaving metal hydride bonds enables the prediction of chemical reactivity, such as for the bond-forming and bond-breaking events that occur in a catalytic reaction. Thermodynamic hydricity is the free energy required to cleave an M-H bond to generate a hydride ion (H(-)). Three primary methods have been developed for hydricity determination: the hydride transfer method establishes hydride transfer equilibrium with a hydride donor/acceptor pair of known hydricity, the H2 heterolysis method involves measuring the equilibrium of heterolytic cleavage of H2 in the presence of a base, and the potential-pKa method considers stepwise transfer of a proton and two electrons to give a net hydride transfer. Using these methods, over 100 thermodynamic hydricity values for transition metal hydrides have been determined in acetonitrile or water. In acetonitrile, the hydricity of metal hydrides spans a range of more than 50 kcal/mol. Methods for using hydricity values to predict chemical reactivity are also discussed, including organic transformations, the reduction of CO2, and the production and oxidation of hydrogen.

  12. Catabolism of hyaluronan: involvement of transition metals

    PubMed Central

    Šoltés, Ladislav; Kogan, Grigorij

    2009-01-01

    One of the very complex structures in the vertebrates is the joint. The main component of the joint is the synovial fluid with its high-molar-mass glycosaminoglycan hyaluronan, which turnover is approximately twelve hours. Since the synovial fluid does not contain any hyaluronidases, the fast hyaluronan catabolism is caused primarily by reductive-oxidative processes. Eight transition metals – V23, Mn25, Fe26, Co27, Ni28, Cu29, Zn30, and Mo42 – naturally occurring in living organism are essential for the control of various metabolic and signaling pathways. They are also the key elements in catabolism of hyaluronan in the joint. In this overview, the role of these metals in physiological and pathophysiological catabolism of hyaluronan is described. The participation of these metals in the initiation and propagation of the radical degradation hyaluronan is critically reviewed. PMID:21217859

  13. Spinning around in Transition-Metal Chemistry.

    PubMed

    Swart, Marcel; Gruden, Maja

    2016-12-20

    The great diversity and richness of transition metal chemistry, such as the features of an open d-shell, opened a way to numerous areas of scientific research and technological applications. Depending on the nature of the metal and its environment, there are often several energetically accessible spin states, and the progress in accurate theoretical treatment of this complicated phenomenon is presented in this Account. The spin state energetics of a transition metal complex can be predicted theoretically on the basis of density functional theory (DFT) or wave function based methodology, where DFT has advantages since it can be applied routinely to medium-to-large-sized molecules and spin-state consistent density functionals are now available. Additional factors such as the effect of the basis set, thermochemical contributions, solvation, relativity, and dispersion, have been investigated by many researchers, but challenges in unambiguous assignment of spin states still remain. The first DFT studies showed intrinsic spin-state preferences of hybrid functionals for high spin and early generalized gradient approximation functionals for low spin. Progress in the development of density functional approximations (DFAs) then led to a class of specially designed DFAs, such as OPBE, SSB-D, and S12g, and brought a very intriguing and fascinating observation that the spin states of transition metals and the SN2 barriers of organic molecules are somehow intimately linked. Among the many noteworthy results that emerged from the search for the appropriate description of the complicated spin state preferences in transition metals, we mainly focused on the examination of the connection between the spin state and the structures or coordination modes of the transition metal complexes. Changes in spin states normally lead only to changes in the metal-ligand bond lengths, but to the best of our knowledge, the dapsox ligand showed the first example of a transition-metal complex where a

  14. Synthesis, characterization and antibacterial activity of a tridentate Schiff base derived from cephalothin and sulfadiazine, and its transition metal complexes.

    PubMed

    Anacona, J R; Noriega, Natiana; Camus, Juan

    2015-02-25

    Metal(II) coordination compounds of a cephalothin Schiff base (H2L) derived from the condensation of cephalothin antibiotic with sulfadiazine were synthesized. The Schiff base ligand, mononuclear [ML(H2O)3] (M(II)=Mn,Co,Ni,Zn) complexes and magnetically diluted dinuclear copper(II) complex [CuL(H2O)3]2 were characterized by several techniques, including elemental and thermal analysis, molar conductance and magnetic susceptibility measurements, electronic, FT-IR, EPR and (1)H NMR spectral studies. The cephalothin Schiff base ligand H2L behaves as a dianionic tridentate NOO chelating agent. The biological applications of complexes have been studied on two bacteria strains (Escherichia coli and Staphylococcus aureus) by agar diffusion disc method.

  15. Mechanical failure and glass transition in metallic glasses

    SciTech Connect

    Egami, Takeshi

    2011-01-01

    The current majority view on the phenomenon of mechanical failure in metallic glasses appears to be that it is caused by the activity of some structural defects, such as free-volumes or shear transformation zones, and the concentration of such defects is small, only of the order of 1%. However, the recent results compel us to revise this view. Through molecular dynamics simulation it has been shown that mechanical failure is the stress-induced glass transition. According to our theory the concentration of the liquid-like sites (defects) is well over 20% at the glass transition. We suggest that the defect concentration in metallic glasses is actually very high, and percolation of such defects causes atomic avalanche and mechanical failure. In this article we discuss the glass transition, mechanical failure and viscosity from such a point of view.

  16. Transition Metal Nitrides for Electrocatalytic Energy Conversion: Opportunities and Challenges.

    PubMed

    Xie, Junfeng; Xie, Yi

    2016-03-07

    Electrocatalytic energy conversion has been considered as one of the most efficient and promising pathways for realizing energy storage and energy utilization in modern society. To improve electrocatalytic reactions, specific catalysts are needed to lower the overpotential. In the search for efficient alternatives to noble metal catalysts, transition metal nitrides have attracted considerable interest due to their high catalytic activity and unique electronic structure. Over the past few decades, numerous nitride-based catalysts have been explored with respect to their ability to drive various electrocatalytic reactions, such as the hydrogen evolution reaction and the oxygen evolution reaction to achieve water splitting and the oxygen reduction reaction coupled with the methanol oxidation reaction to construct fuel cells or rechargeable Li-O2 batteries. This Minireview provides a brief overview of recent progress on electrocatalysts based on transition metal nitrides, and outlines the current challenges and future opportunities.

  17. Advancements in the Synthesis and Applications of Cationic N-Heterocycles through Transition Metal-Catalyzed C-H Activation.

    PubMed

    Gandeepan, Parthasarathy; Cheng, Chien-Hong

    2016-02-18

    Cationic N-heterocycles are an important class of organic compounds largely present in natural and bioactive molecules. They are widely used as fluorescent dyes for biological studies, as well as in spectroscopic and microscopic methods. These compounds are key intermediates in many natural and pharmaceutical syntheses. They are also a potential candidate for organic light-emitting diodes (OLEDs). Because of these useful applications, the development of new methods for the synthesis of cationic N-heterocycles has received a lot of attention. In particular, many C-H activation methodologies that realize high step- and atom-economies toward these compounds have been developed. In this review, recent advancements in the synthesis and applications of cationic N-heterocycles through C-H activation reactions are summarized. The new C-H activation reactions described in this review are preferred over their classical analogs.

  18. Transition metal (Co, Ni) nanoparticles wrapped with carbon and their superior catalytic activities for the reversible hydrogen storage of magnesium hydride.

    PubMed

    Huang, Xu; Xiao, Xuezhang; Zhang, Wei; Fan, Xiulin; Zhang, Liuting; Cheng, Changjun; Li, Shouquan; Ge, Hongwei; Wang, Qidong; Chen, Lixin

    2017-02-01

    Magnesium hydride (MgH2) exhibits long-term stability and has recently been developed as a safe alternative to store hydrogen in the solid state, due to its high capacity of 7.6 wt% H2 and low cost compared to other metal hydrides. However, the high activation energy and poor kinetics of MgH2 lead to inadequate hydrogen storage properties, resulting in low energy efficiency. Nano-catalysis is deemed to be the most effective strategy in improving the kinetics performance of hydrogen storage materials. In this work, robust and efficient architectures of carbon-wrapped transition metal (Co/C, Ni/C) nanoparticles (8-16 nm) were prepared and used as catalysts in the MgH2 system via ball milling to improve its de/rehydrogenation kinetics. Between the two kinds of nano-catalysts, the Ni/C nanoparticles exhibit a better catalytic efficiency. MgH2 doped with 6% Ni/C (MgH2-6%Ni/C) exhibits a peak dehydrogenation temperature of 275.7 °C, which is 142.7, 54.2 and 32.5 °C lower than that of commercial MgH2, milled MgH2 and MgH2 doped with 6% Co/C (MgH2-6%Co/C), respectively. MgH2 doped with 6% Ni/C can release about 6.1 wt% H2 at 250 °C. More importantly, the dehydrogenated MgH2-6%Ni/C is even able to uptake 5.0 wt% H2 at 100 °C within 20 s. Moreover, a cycling test of MgH2 doped with 8% Ni/C demonstrates its excellent hydrogen absorption/desorption stability with respect to both capacity (up to 6.5 wt%) and kinetics (within 8 min at 275 °C for dehydrogenation and within 10 s at 200 °C for rehydrogenation). Mechanistic research reveals that the in situ formed Mg2Ni and Mg2NiH4 nanoparticles can be regarded as advanced catalytically active species in the MgH2-Ni/C system. Meanwhile, the carbon attached around the surface of transition metal nanoparticles can successfully inhibit the aggregation of the catalysts and achieve the steadily, prompting de/rehydrogenation during the subsequent cycling process. The intrinsic catalytic effects and the uniform distributions of Mg2Ni

  19. Activation of organozinc reagents with t-Bu-P4 base for transition metal-free catalytic SN2' reaction.

    PubMed

    Kobayashi, Koji; Ueno, Masahiro; Naka, Hiroshi; Kondo, Yoshinori

    2008-08-28

    The t-Bu-P4 base was found to be an excellent catalyst for activating organozinc reagents and was used to promote the S(N)2' reaction of alpha,beta-unsaturated esters bearing a gamma-chloride using various organozinc reagents: these reactions proceeded in high yields with excellent chemo-and regioselectivity.

  20. Impact of transition metal on nitrogen retention and activity of iron-nitrogen-carbon oxygen reduction catalysts.

    PubMed

    Ganesan, Selvarani; Leonard, Nathaniel; Barton, Scott Calabrese

    2014-03-14

    Iron based nitrogen doped carbon (FeNC) catalysts are synthesized by high-pressure pyrolysis of carbon and melamine with varying amounts of iron acetate in a closed, constant-volume reactor. The optimum nominal amount of Fe (1.2 wt%) in FeNC catalysts is established through oxygen reduction reaction (ORR) polarization. Since the quantity of iron used in FeNCs is very small, the amount of Fe retained in FeNC catalysts after leaching is determined by UV-VIS spectroscopy. As nitrogen is considered to be a component of active sites, the amount of bulk and surface nitrogen retention in FeNC catalysts are measured using elemental analysis and X-ray photoelectron spectroscopy, respectively. It is found that increasing nominal Fe content in FeNC catalysts leads to a decreased level of nitrogen retention. Thermogravimetric analysis demonstrates that increasing nominal Fe content leads to increased weight loss during pyrolysis, particularly at high temperatures. Catalysts are also prepared in the absence of iron source, and with iron removed by washing with hot aqua regia post-pyrolysis. FeNC catalysts prepared with no Fe show high retained nitrogen content but poor ORR activity, and aqua regia washed catalysts demonstrate similar activity to Fe-free catalysts, indicating that Fe is an active site component.

  1. Laser materials based on transition metal ions

    NASA Astrophysics Data System (ADS)

    Moncorgé, Richard

    2017-01-01

    The purpose of this presentation is to review the spectroscopic properties of the main laser materials based on transition metal ions which lead to noticeable laser performance at room temperature and, for very few cases, because of unique properties, when they are operated at cryogenic temperatures. The description also includes the materials which are currently being used as saturable absorbers for passive-Q-switching of a variety of other near- and mid-infrared solid state lasers. A substantial part of the article is devoted first to the description of the energy levels and of the absorption and emission transitions of the transition metal ions in various types of environments by using the well-known Tanabe-Sugano diagrams. It is shown in particular how these diagrams can be used along with other theoretical considerations to understand and describe the spectroscopic properties of ions sitting in crystal field environments of near-octahedral or near-tetrahedral symmetry. The second part is then dedicated to the description (positions and intensities) of the main absorption and emission features which characterize the different types of materials.

  2. Catalytic mechanism of transition-metal compounds on Mg hydrogen sorption reaction.

    PubMed

    Barkhordarian, Gagik; Klassen, Thomas; Bormann, Rüdiger

    2006-06-08

    The catalytic mechanisms of transition-metal compounds during the hydrogen sorption reaction of magnesium-based hydrides were investigated through relevant experiments. Catalytic activity was found to be influenced by four distinct physico-thermodynamic properties of the transition-metal compound: a high number of structural defects, a low stability of the compound, which however has to be high enough to avoid complete reduction of the transition metal under operating conditions, a high valence state of the transition-metal ion within the compound, and a high affinity of the transition-metal ion to hydrogen. On the basis of these results, further optimization of the selection of catalysts for improving sorption properties of magnesium-based hydrides is possible. In addition, utilization of transition-metal compounds as catalysts for other hydrogen storage materials is considered.

  3. Ultrafast photophysics of transition metal complexes.

    PubMed

    Chergui, Majed

    2015-03-17

    The properties of transition metal complexes are interesting not only for their potential applications in solar energy conversion, OLEDs, molecular electronics, biology, photochemistry, etc. but also for their fascinating photophysical properties that call for a rethinking of fundamental concepts. With the advent of ultrafast spectroscopy over 25 years ago and, more particularly, with improvements in the past 10-15 years, a new area of study was opened that has led to insightful observations of the intramolecular relaxation processes such as internal conversion (IC), intersystem crossing (ISC), and intramolecular vibrational redistribution (IVR). Indeed, ultrafast optical spectroscopic tools, such as fluorescence up-conversion, show that in many cases, intramolecular relaxation processes can be extremely fast and even shorter than time scales of vibrations. In addition, more and more examples are appearing showing that ultrafast ISC rates do not scale with the magnitude of the metal spin-orbit coupling constant, that is, that there is no heavy-atom effect on ultrafast time scales. It appears that the structural dynamics of the system and the density of states play a crucial role therein. While optical spectroscopy delivers an insightful picture of electronic relaxation processes involving valence orbitals, the photophysics of metal complexes involves excitations that may be centered on the metal (called metal-centered or MC) or the ligand (called ligand-centered or LC) or involve a transition from one to the other or vice versa (called MLCT or LMCT). These excitations call for an element-specific probe of the photophysics, which is achieved by X-ray absorption spectroscopy. In this case, transitions from core orbitals to valence orbitals or higher allow probing the electronic structure changes induced by the optical excitation of the valence orbitals, while also delivering information about the geometrical rearrangement of the neighbor atoms around the atom of

  4. Raman spectroscopy of transition metal dichalcogenides

    NASA Astrophysics Data System (ADS)

    Saito, R.; Tatsumi, Y.; Huang, S.; Ling, X.; Dresselhaus, M. S.

    2016-09-01

    Raman spectroscopy of transition metal dichalcogenides (TMDs) is reviewed based on our recent theoretical and experimental works. First, we discuss the semi-classical and quantum mechanical description for the polarization dependence of Raman spectra of TMDs in which the optical dipole transition matrix elements as a function of laser excitation energy are important for understanding the polarization dependence of the Raman intensity and Raman tensor. Overviewing the symmetry of TMDs, we discuss the dependence of the Raman spectra of TMDs on layer thickness, polarization, laser energy and the structural phase. Furthermore, we discuss the Raman spectra of twisted bilayer and heterostructures of TMDs. Finally, we give our perspectives on the Raman spectroscopy of TMDs.

  5. Raman spectroscopy of transition metal dichalcogenides.

    PubMed

    Saito, R; Tatsumi, Y; Huang, S; Ling, X; Dresselhaus, M S

    2016-09-07

    Raman spectroscopy of transition metal dichalcogenides (TMDs) is reviewed based on our recent theoretical and experimental works. First, we discuss the semi-classical and quantum mechanical description for the polarization dependence of Raman spectra of TMDs in which the optical dipole transition matrix elements as a function of laser excitation energy are important for understanding the polarization dependence of the Raman intensity and Raman tensor. Overviewing the symmetry of TMDs, we discuss the dependence of the Raman spectra of TMDs on layer thickness, polarization, laser energy and the structural phase. Furthermore, we discuss the Raman spectra of twisted bilayer and heterostructures of TMDs. Finally, we give our perspectives on the Raman spectroscopy of TMDs.

  6. Multifunctional Ligands in Transition Metal Catalysis

    SciTech Connect

    Crabtree, Robert H

    2011-01-01

    Sophisticated ligands are now being designed that do far more than just fulfil their traditional spectator roles by binding to the metal and providing a sterically-defined binding pocket for the substrate in homogeneous transition metal catalysis. This Focus review emphasizes selected cases in which ligands carry additional functional groups that change the properties of the ligand as a result of an external stimulus or undergo catalytically-relevant ligand-based reactivity. These include proton responsive ligands capable of gaining or losing one or more protons, ligands having a hydrogen bonding function, electroresponsive ligands capable of gaining or losing one or more electrons, and photoresponsive ligands capable of undergoing a useful change of properties upon irradiation. Molecular recognition ligands and proton coupled electron transfer (PCET) are briefly discussed.

  7. Switchable Metal-Insulator Phase Transition Metamaterials.

    PubMed

    Hajisalem, Ghazal; Nezami, Mohammadreza S; Gordon, Reuven

    2017-04-06

    We investigate the switching of a gap plasmon tunnel junction between conducting and insulating states. Hysteresis is observed in the second and the third harmonic generation power dependence, which arises by thermally induced disorder ("melting") of a two-carbon self-assembled monolayer between an ultraflat gold surface and metal nanoparticles. The hysteresis is observed for a variety of nanoparticle sizes, but not for larger tunnel junctions where there is no appreciable tunneling. By combining quantum corrected finite-difference time-domain simulations with nonlinear scattering theory, we calculate the changes in the harmonic generation between the tunneling and the insulating states, and good agreement is found with the experiments. This paves the way to a new class of metal-insulator phase transition switchable metamaterials, which may provide next-generation information processing technologies.

  8. Zwitterionic Group VIII transition metal initiators supported by olefin ligands

    DOEpatents

    Bazan, Guillermo C.; Chen, Yaofeng

    2011-10-25

    A zwitterionic Group VIII transition metal complex containing the simple and relatively small 3-(arylimino)-but-1-en-2-olato ligand that catalyzes the formation of polypropylene and high molecular weight polyethylene. A novel feature of this catalyst is that the active species is stabilized by a chelated olefin adduct. The present invention also provides methods of polymerizing olefin monomers using zwitterionic catalysts, particularly polypropylene and high molecular weight polyethylene.

  9. High-Pressure Thermodynamic Properties of f-electron Metals, Transition Metal Oxides, and Half-Metallic Magnets

    SciTech Connect

    Scalettar, Richard T.; Pickett, Warren E.

    2004-07-01

    This project involves research into the thermodynamic properties of f-electron metals, transition metal oxides, and half-metallic magnets at high pressure. These materials are ones in which the changing importance of electron-electron interactions as the distance between atoms is varied can tune the system through phase transitions from localized to delocalized electrons, from screened to unscreened magnetic moments, and from normal metal to one in which only a single spin specie can conduct. Three main thrusts are being pursued: (1) Mott transitions in transition metal oxides, (2) magnetism in half-metallic compounds, and (3) large volume-collapse transitions in f-band metals.

  10. High-Pressure Thermodynamic Properties of f-electron Metals, Transition Metal Oxides, and Half-Metallic Magnets

    SciTech Connect

    Richard T. Scalettar; Warren E. Pickett

    2005-08-02

    This project involves research into the thermodynamic properties of f-electron metals, transition metal oxides, and half-metallic magnets at high pressure. These materials are ones in which the changing importance of electron-electron interactions as the distance between atoms is varied can tune the system through phase transitions from localized to delocalized electrons, from screened to unscreened magnetic moments, and from normal metal to one in which only a single spin specie can conduct. Three main thrusts are being pursued: (i) Mott transitions in transition metal oxides, (ii) magnetism in half-metallic compounds, and (iii) large volume-collapse transitions in f-band metals.

  11. Simple transition metal oxides (Conference Presentation)

    NASA Astrophysics Data System (ADS)

    Schuller, Ivan K.; Basaran, Ali C.; de la Venta, Jose; Ramirez, Juan Gabriel; Saerbeck, Thomas; Valmianski, Ilya; Wang, Siming

    2016-10-01

    Hybrid materials allow the engineering of new material properties by creative uses of proximity effects. When two dissimilar materials are in close physical proximity the properties of each one may be radically modified or occasionally a completely new material emerges. In the area of magnetism, controlling the magnetic properties of ferromagnetic thin films without magnetic fields is an on- going challenge with multiple technological implications for low- energy consumption memory and logic devices. Interesting possibilities include ferromagnets in proximity to dissimilar materials such as antiferromagnets or oxides that undergo metal-insulator transitions. The proximity of ferromagnets to antiferromagnets has given rise to the extensively studied Exchange Bias[1]. Our recent investigations in this field have addressed crucial issues regarding the importance of the antiferromagnetic [2-3] and ferromagnetic [4] bulk for the Exchange Bias and the unusual short time dynamics [5]. In a series of recent studies, we have investigated the magnetic properties of different hybrids of ferromagnets (Ni, Co and Fe) and oxides, which undergo metal-insulator and structural phase transitions. Both the static as well as dynamical properties of the ferromagnets are drastically affected. Static properties such as the coercivity, anisotropy and magnetization [6-8] and dynamical properties such as the microwave response are clearly modified by the proximity effect and give raise to interesting perhaps useful properties. Work supported by US-AFOSR and US-DOE

  12. Tunable magnetocaloric effect in transition metal alloys.

    PubMed

    Belyea, Dustin D; Lucas, M S; Michel, E; Horwath, J; Miller, Casey W

    2015-10-28

    The unpredictability of geopolitical tensions and resulting supply chain and pricing instabilities make it imperative to explore rare earth free magnetic materials. As such, we have investigated fully transition metal based "high entropy alloys" in the context of the magnetocaloric effect. We find the NiFeCoCrPdx family exhibits a second order magnetic phase transition whose critical temperature is tunable from 100 K to well above room temperature. The system notably displays changes in the functionality of the magnetic entropy change depending on x, which leads to nearly 40% enhancement of the refrigerant capacity. A detailed statistical analysis of the universal scaling behavior provides direct evidence that heat treatment and Pd additions reduce the distribution of exchange energies in the system, leading to a more magnetically homogeneous alloy. The general implications of this work are that the parent NiFeCoCr compound can be tuned dramatically with FCC metal additives. Together with their relatively lower cost, their superior mechanical properties that aid manufacturability and their relative chemical inertness that aids product longevity, NiFeCoCr-based materials could ultimately lead to commercially viable magnetic refrigerants.

  13. Tunable magnetocaloric effect in transition metal alloys

    NASA Astrophysics Data System (ADS)

    Belyea, Dustin D.; Lucas, M. S.; Michel, E.; Horwath, J.; Miller, Casey W.

    2015-10-01

    The unpredictability of geopolitical tensions and resulting supply chain and pricing instabilities make it imperative to explore rare earth free magnetic materials. As such, we have investigated fully transition metal based “high entropy alloys” in the context of the magnetocaloric effect. We find the NiFeCoCrPdx family exhibits a second order magnetic phase transition whose critical temperature is tunable from 100 K to well above room temperature. The system notably displays changes in the functionality of the magnetic entropy change depending on x, which leads to nearly 40% enhancement of the refrigerant capacity. A detailed statistical analysis of the universal scaling behavior provides direct evidence that heat treatment and Pd additions reduce the distribution of exchange energies in the system, leading to a more magnetically homogeneous alloy. The general implications of this work are that the parent NiFeCoCr compound can be tuned dramatically with FCC metal additives. Together with their relatively lower cost, their superior mechanical properties that aid manufacturability and their relative chemical inertness that aids product longevity, NiFeCoCr-based materials could ultimately lead to commercially viable magnetic refrigerants.

  14. Metal Insulator transition in Vanadium Dioxide

    NASA Astrophysics Data System (ADS)

    Jovaini, Azita; Fujita, Shigeji; Suzuki, Akira; Godoy, Salvador

    2012-02-01

    MAR12-2011-000262 Abstract Submitted for the MAR12 Meeting of The American Physical Society Sorting Category: 03.9 (T) On the metal-insulator-transition in vanadium dioxide AZITA JOVAINI, SHIGEJI FUJITA, University at Buffalo, SALVADOR GODOY, UNAM, AKIRA SUZUKI, Tokyo University of Science --- Vanadium dioxide (VO2) undergoes a metal-insulator transition (MIT) at 340 K with the structural change from tetragonal to monoclinic crystal. The conductivity _/ drops at MIT by four orders of magnitude. The low temperature monoclinic phase is known to have a lower ground-state energy. The existence of the k-vector k is prerequisite for the conduction since the k appears in the semiclassical equation of motion for the conduction electron (wave packet). The tetragonal (VO2)3 unit is periodic along the crystal's x-, y-, and z-axes, and hence there is a three-dimensional k-vector. There is a one-dimensional k for a monoclinic crystal. We believe this difference in the dimensionality of the k-vector is the cause of the conductivity drop. Prefer Oral Session X Prefer .

  15. Tunable magnetocaloric effect in transition metal alloys

    PubMed Central

    Belyea, Dustin D.; Lucas, M. S.; Michel, E.; Horwath, J.; Miller, Casey W.

    2015-01-01

    The unpredictability of geopolitical tensions and resulting supply chain and pricing instabilities make it imperative to explore rare earth free magnetic materials. As such, we have investigated fully transition metal based “high entropy alloys” in the context of the magnetocaloric effect. We find the NiFeCoCrPdx family exhibits a second order magnetic phase transition whose critical temperature is tunable from 100 K to well above room temperature. The system notably displays changes in the functionality of the magnetic entropy change depending on x, which leads to nearly 40% enhancement of the refrigerant capacity. A detailed statistical analysis of the universal scaling behavior provides direct evidence that heat treatment and Pd additions reduce the distribution of exchange energies in the system, leading to a more magnetically homogeneous alloy. The general implications of this work are that the parent NiFeCoCr compound can be tuned dramatically with FCC metal additives. Together with their relatively lower cost, their superior mechanical properties that aid manufacturability and their relative chemical inertness that aids product longevity, NiFeCoCr-based materials could ultimately lead to commercially viable magnetic refrigerants. PMID:26507636

  16. Holographic disorder driven superconductor-metal transition

    NASA Astrophysics Data System (ADS)

    Areán, D.; Pando Zayas, L. A.; Landea, I. Salazar; Scardicchio, A.

    2016-11-01

    We implement the effects of disorder on a holographic superconductor by introducing a random chemical potential on the boundary. We demonstrate explicitly that increasing disorder leads to the formation of islands where the superconducting order is enhanced and subsequently to the transition to a metal. We study the behavior of the superfluid density and of the conductivity as a function of the strength of disorder. We find explanations for various marked features in the conductivities in terms of hydrodynamic quasinormal modes of the holographic superconductors. These identifications plus a particular disorder-dependent spectral weight shift in the conductivity point to a signature of the Higgs mode in the context of disordered holographic superconductors. We observe that the behavior of the order parameter close to the transition is not mean-field type as in the clean case; rather we find robust agreement with exp (-A |T -Tc|-ν), with ν =1.03 ±0.02 for this disorder-driven smeared transition.

  17. Nucleic acid-functionalized transition metal nanosheets for biosensing applications.

    PubMed

    Mo, Liuting; Li, Juan; Liu, Qiaoling; Qiu, Liping; Tan, Weihong

    2017-03-15

    In clinical diagnostics, as well as food and environmental safety practices, biosensors are powerful tools for monitoring biological or biochemical processes. Two-dimensional (2D) transition metal nanomaterials, including transition metal chalcogenides (TMCs) and transition metal oxides (TMOs), are receiving growing interest for their use in biosensing applications based on such unique properties as high surface area and fluorescence quenching abilities. Meanwhile, nucleic acid probes based on Watson-Crick base-pairing rules are also being widely applied in biosensing based on their excellent recognition capability. In particular, the emergence of functional nucleic acids in the 1980s, especially aptamers, has substantially extended the recognition capability of nucleic acids to various targets, ranging from small organic molecules and metal ions to proteins and cells. Based on π-π stacking interaction between transition metal nanosheets and nucleic acids, biosensing systems can be easily assembled. Therefore, the combination of 2D transition metal nanomaterials and nucleic acids brings intriguing opportunities in bioanalysis and biomedicine. In this review, we summarize recent advances of nucleic acid-functionalized transition metal nanosheets in biosensing applications. The structure and properties of 2D transition metal nanomaterials are first discussed, emphasizing the interaction between transition metal nanosheets and nucleic acids. Then, the applications of nucleic acid-functionalized transition metal nanosheet-based biosensors are discussed in the context of different signal transducing mechanisms, including optical and electrochemical approaches. Finally, we provide our perspectives on the current challenges and opportunities in this promising field.

  18. Ductile-to-brittle transition in spallation of metallic glasses

    SciTech Connect

    Huang, X.; Ling, Z.; Dai, L. H.

    2014-10-14

    In this paper, the spallation behavior of a binary metallic glass Cu{sub 50}Zr{sub 50} is investigated with molecular dynamics simulations. With increasing the impact velocity, micro-voids induced by tensile pulses become smaller and more concentrated. The phenomenon suggests a ductile-to-brittle transition during the spallation process. Further investigation indicates that the transition is controlled by the interaction between void nucleation and growth, which can be regarded as a competition between tension transformation zones (TTZs) and shear transformation zones (STZs) at atomic scale. As impact velocities become higher, the stress amplitude and temperature rise in the spall region increase and micro-structures of the material become more unstable. Therefore, TTZs are prone to activation in metallic glasses, leading to a brittle behavior during the spallation process.

  19. Transition metal catalysis in the generation of natural gas

    SciTech Connect

    Mango, F.D.

    1995-12-31

    The view that natural gas is thermolytic, coming from decomposing organic debris, has remained almost unchallenged for nearly half a century. Disturbing contradictions exist, however: Oil is found at great depth, at temperatures where only gas should exist and oil and gas deposits show no evidence of the thermolytic debris indicative of oil decomposing to gas. Moreover, laboratory attempts to duplicate the composition of natural gas, which is typically between 60 and 95+ wt% methane in C{sub 1}-C{sub 4}, have produced insufficient amounts of methane (10 to 60%). It has been suggested that natural gas may be generated catalytically, promoted by the transition metals in carbonaceous sedimentary rocks. This talk will discuss experimental results that support this hypothesis. Various transition metals, as pure compounds and in source rocks, will be shown to generate a catalytic gas that is identical to natural gas. Kinetic results suggest robust catalytic activity under moderate catagenetic conditions.

  20. Novel metal-based pharmacologically dynamic agents of transition metal(II) complexes: Designing, synthesis, structural elucidation, DNA binding and photo-induced DNA cleavage activity

    NASA Astrophysics Data System (ADS)

    Raman, N.; Jeyamurugan, R.; Sakthivel, A.; Mitu, L.

    2010-01-01

    Novel Schiff base Cu(II), Ni(II), Co(II) and Zn(II) complexes have been designed and synthesized using the macrocyclic ligand derived from the condensation of diethylphthalate with Schiff base, obtained from benzene-1,2-diamine and 3-benzylidene-pentane-2,4-dione. The ligand and its complexes have been characterized by analytical and spectral techniques. DNA binding properties of these complexes have been investigated by UV-vis, viscosity measurements, cyclic voltammetric and differential pulse voltammogram studies. The intrinsic binding constants for Co(II), Ni(II), Cu(II) and Zn(II) complexes are 1.6 × 10 6, 1.8 × 10 6, 2.0 × 10 6 and 1.5 × 10 6 M -1 respectively which are obtained from electronic absorption experiment. Control DNA cleavage experiments using pUC19 supercoiled (SC) DNA and minor groove binder (distamycin) suggest the major groove binding tendency for the synthesized complexes. In the presence of a reducing agent like 3-mercaptopropionic acid (MPA), the synthesized complexes show chemical nuclease activity under dark reaction condition. The complexes also show efficient photo-induced DNA cleavage activity on irradiation with a monochromatic UV light of 360 nm in the presence of inhibitors. Control experiments show inhibition of cleavage in the presence of singlet oxygen quencher like sodium azide and enhancement of cleavage in D 2O, suggesting the formation of singlet oxygen as a reactive species in a type-II process.

  1. Synthesis and characterization of ligational behavior of curcumin drug towards some transition metal ions: Chelation effect on their thermal stability and biological activity

    NASA Astrophysics Data System (ADS)

    Refat, Moamen S.

    2013-03-01

    Complexes of Cr(III), Mn(II), Fe(III), Co(II), Ni(II), Cu(II) and Zn(II) with curcumin ligand as antitumor activity were synthesized and characterized by elemental analysis, conductometry, magnetic susceptibility, UV-Vis, IR, Raman, ESR, 1H-NMR spectroscopy, X-ray diffraction analysis of powdered samples and thermal analysis, and screened for antimicrobial activity. The IR spectral data suggested that the ligand behaves as a monobasic bidentate ligand towards the central metal ion with an oxygen's donor atoms sequence of both sbnd OH and Cdbnd O groups under keto-enol structure. From the microanalytical data, the stoichiometry of the complexes 1:2 (metal:ligand) was found. The ligand and their metal complexes were screened for antibacterial activity against Escherichia Coli, Staphylococcus aureus, Bacillus subtilis and Pseudomonas aeruginosa and fungicidal activity against Aspergillus flavus and Candida albicans.

  2. Radiation damage of transition metal carbides

    SciTech Connect

    Dixon, G.

    1991-01-01

    In this grant period we have investigated electrical properties of transition metal carbides and radiation-induced defects produced by low-temperature electron irradiation in them. Special attention has been given to the composition VC[sub 0.88] in which the vacancies on the carbon sublattice of this fcc crystal order to produce a V[sub 8]C[sub 7] superlattice. The existence of this superlattice structure was found to make the crystal somewhat resistant to radiation damage at low doses and/or at ambient temperature. At larger doses significant changes in the resistivity are produced. Annealing effects were observed which we believe to be connected with the reconstitution of the superlattice structure.

  3. Theoretical studies of transition metal dimers

    NASA Technical Reports Server (NTRS)

    Walch, Stephen P.; Bauschlicher, Charles W., Jr.

    1985-01-01

    The CASSCF approach was used to perform the MCSCF calculations for a number of transition metal dimers, including the Sc2, Ti2, Cr2, Cu2, TiV, Y2, Nb2, and Mo2 molecules; in addition, CASSCF/CI calculations were carried out for Sc2, Ti2, Cu2, and Y2. The CASSCF procedure is shown to provide a consistent set of calculations for these molecules, from which trends and a simple qualitative picture of the electronic structure may be derived. In particular, the calculations confirmed the ground states of the Sc2 and the TiV, and led to predictions for other molecules in this series. In addition to specific predictions, the study provides a simple qualitative picture of the bonding in these dimers.

  4. Transition metal-ligand bonding. II

    NASA Technical Reports Server (NTRS)

    Bauschlicher, C. W., Jr.

    1986-01-01

    The nature of the bonding of CO, H2O, and NH3 to transition metal atoms is analyzed using the constrained-space-orbital-variation (CSOV) technique. The cooperative effects for Ni(CO)2 are found to be different than those for Ni(H2O)2. The bonding between neutral systems and the positive ions is found to be quite different; NiCO(+) has little pi bonding, while NiCO has strong pi bonding. The positive ion of NiH2O is far more strongly bound than the neutral, while for NiCO the positive ion and neutral are bound by about the same energy.

  5. Transition metal catalysis and nucleophilic fluorination.

    PubMed

    Hollingworth, Charlotte; Gouverneur, Véronique

    2012-03-21

    Transition metal catalyzed transformations using fluorinating reagents have been developed extensively for the preparation of synthetically valuable fluorinated targets. This is a topic of critical importance to facilitate laboratory and industrial chemical synthesis of fluorine containing pharmaceuticals and agrochemicals. Translation to (18)F-radiochemistry is also emerging as a vibrant research field because functional imaging based on Positron Emission Tomography (PET) is increasingly used for both diagnosis and pharmaceutical development. This review summarizes how fluoride sources have been used for the catalytic nucleophilic fluorination of various substrates inclusive of aryl triflates, alkynes, allylic halides, allylic esters, allylic trichloroacetimidates, benzylic halides, tertiary alkyl halides and epoxides. Until recently, progress in this field of research has been slow in part because of the challenges associated with the dual reactivity profile of fluoride (nucleophile or base). Despite these difficulties, some remarkable breakthroughs have emerged. This includes the demonstration that Pd(0)/Pd(II)-catalyzed nucleophilic fluorination to access fluoroarenes from aryl triflates is feasible, and the first examples of Tsuji-Trost allylic alkylation with fluoride using either allyl chlorides or allyl precursors bearing O-leaving groups. More recently, allylic fluorides were also made accessible under iridium catalysis. Another reaction, which has been greatly improved based on careful mechanistic work, is the catalytic asymmetric hydrofluorination of meso epoxides. Notably, each individual transition metal catalyzed nucleophilic fluorination reported to date employs a different F-reagent, an observation indicating that this area of research will benefit from a larger pool of nucleophilic fluoride sources. In this context, a striking recent development is the successful design, synthesis and applications of a fluoride-derived electrophilic late stage

  6. New Gallides and Germanides of Transition Metals

    NASA Astrophysics Data System (ADS)

    Popova, S. V.

    1982-01-01

    The analysis of the average atomic volumes (AAV) of the intermediate phases from the concentration was done in many two-component systems. It was shown that in some systems (namely transition metal with non-transition element from the IIIrd or IVth group of the periodic table) the AAV of the intermediate phases are much more less than the sum of the volumes of the pure components. It means that the formation of the intermediate phases in such systems is accompanied by a rather large decreasing of the volume in comparison with the mixture of elements. For this reason the high pressure conditions are favourable for the formation of the intermediate phases in such systems from the thermodynamical point of view. On the ground of these data the systems W-Ga, W-Ge, Re-Ga, Os-Ga, Sc-Ga, Ta-Ga, were investigated at high pressures and temperatures. It was found that many new phases are crystallised in these systems. All of them are metastable at room pressure. The composition and crystal structures of these phases were investigated at ordinary conditions.

  7. Theory of the pairbreaking superconductor-metal transition in nanowires

    NASA Astrophysics Data System (ADS)

    Sachdev, Subir

    2009-03-01

    We present a detailed description of a zero temperature phase transition between superconducting and diffusive metallic states in very thin wires due to a Cooper pair breaking mechanism. The dissipative critical theory contains current reducing fluctuations in the guise of both quantum and thermally activated phase slips. A full cross-over phase diagram is computed via an expansion in the inverse number of complex components of the superconducting order parameter (one in the physical case). The fluctuation corrections to the electrical (σ) and thermal (κ) conductivities are determined, and we find that σ has a non-monotonic temperature dependence in the metallic phase which may be consistent with recent experimental results on ultra-narrow wires. In the quantum critical regime, the ratio of the thermal to electrical conductivity displays a linear temperature dependence and thus the Wiedemann-Franz law is obeyed, with a new universal experimentally verifiable Lorenz number. We also examined the influence of quenched disorder on the superconductor-metal transition. The self-consistent pairing eigenmodes of a quasi-one dimensional wire were determined numerically. Our results support the proposal by Hoyos et al./ (Phys. Rev. Lett. 99, 230601 (2007)) that the transition is described by the same strong disorder fixed point describing the onset of ferromagnetism in the quantum Ising model in a transverse field.

  8. Polytypism in superhard transition-metal triborides

    PubMed Central

    Liang, Yongcheng; Yang, Jiong; Yuan, Xun; Qiu, Wujie; Zhong, Zheng; Yang, Jihui; Zhang, Wenqing

    2014-01-01

    The quest of novel compounds with special structures and unusual functionalities continues to be a central challenge to modern materials science. Even though their exact structures have puzzled scientists for decades, superhard transition-metal borides (TMBs) have long been believed to exist only in simple crystal structures. Here, we report on a polytypic phenomenon in superhard WB3 and MoB3 with a series of energetically degenerate structures due to the random stacking of metal layers amongst the interlocking boron layers. Such polytypism can create a multiphase solid-solution compound with a large number of interfaces amongst different polytypes, and these interfaces will strongly hinder the interlayer sliding movement within each polytype, thereby further increase the hardness of this particular material. Furthermore, in contrast to the conventional knowledge that intrinsically strong chemical bonds in superhard materials should lead to high lattice thermal conductivity, the polytypic TMB3 manifest anomalously low lattice thermal conductivity due to structural disorders and phonon folding. These findings promise to open a new avenue to searching for novel superhard materials with additional functionalities. PMID:24863493

  9. Polytypism in superhard transition-metal triborides.

    PubMed

    Liang, Yongcheng; Yang, Jiong; Yuan, Xun; Qiu, Wujie; Zhong, Zheng; Yang, Jihui; Zhang, Wenqing

    2014-05-27

    The quest of novel compounds with special structures and unusual functionalities continues to be a central challenge to modern materials science. Even though their exact structures have puzzled scientists for decades, superhard transition-metal borides (TMBs) have long been believed to exist only in simple crystal structures. Here, we report on a polytypic phenomenon in superhard WB3 and MoB3 with a series of energetically degenerate structures due to the random stacking of metal layers amongst the interlocking boron layers. Such polytypism can create a multiphase solid-solution compound with a large number of interfaces amongst different polytypes, and these interfaces will strongly hinder the interlayer sliding movement within each polytype, thereby further increase the hardness of this particular material. Furthermore, in contrast to the conventional knowledge that intrinsically strong chemical bonds in superhard materials should lead to high lattice thermal conductivity, the polytypic TMB3 manifest anomalously low lattice thermal conductivity due to structural disorders and phonon folding. These findings promise to open a new avenue to searching for novel superhard materials with additional functionalities.

  10. Electronic transitions and multiferroicity in transition metal oxides

    NASA Astrophysics Data System (ADS)

    Zhou, Haidong

    Four systems have been studied for the localized-itinerant electronic transition in transition-metal oxides: (i) In CaV1- xTixO3, substitution of Ti(IV) introduces Anderson-localized states below a mobility edge mu c that increases with x, crossing epsilon F in the range 0.2 < x< 0.4 and also transforms the strong-correlation fluctuations to localized V(IV): t1e0 configurations for x ≥ 0.1. (ii) The properties of LaTiO3+delta reveal that a hole-poor, strongly correlated electronic phase coexists with a hole-rich, itinerant-electron phase. With delta ≥ 0.03, the hole-rich phase exists as a minority phase of isolated, mobile itinerant-electron clusters embedded in the hole-poor phase. With delta ≥ 0.08, isolated hole-poor clusters are embedded in an itinerant-electron matrix. As delta > 0.08 increases, the hole-poor clusters become smaller and more isolated until they are reduced to super-paramagnetic strong-correlation fluctuations by delta = 0.12. (iii) The data of Y1-xLaxTiO 3 appears to distinguish an itinerant-electron antiferromagnetic phase in the La-rich samples from a localized-electron ferromagnetic phase with a cooperative Jahn-Teller distortion in the Y-rich phase. (iv) The transition at Tt in Mg[Ti2]O4 is a semiconductor-semiconductor transition associated with Ti-Ti dimerization instabilities. The dimerization is caused by lattice instabilities resulting from a double-well Ti-Ti bond potential at a crossover from localized to itinerant electronic behavior. RMn1-xGaxO 3 (R = Ho, Y) and Ho1-xY xMnO3 have been studied for the multiferroicity of RMnO3. Ga doping raises the ferrielectric Curie temperature TC and the Mn-spin reorientation temperature TSR while lowering TN of the Mn spins and the Ho magnetic ordering temperature T 2. The data show an important coupling between the Mn3+-ion and HO3+-ion spins as well as a TSR that is driven by a cooperative MnO5 site rotation and R 3+-ion displacements that modify the c lattice parameter. The data also

  11. Pristine and intercalated transition metal dichalcogenide superconductors

    NASA Astrophysics Data System (ADS)

    Klemm, Richard A.

    2015-07-01

    Transition metal dichalcogenides (TMDs) are quasi-two-dimensional layered compounds that exhibit strongly competing effects of charge-density wave (CDW) formation and superconductivity (SC). The weak van der Waals interlayer bonding between hexagonal layers of octahedral or trigonal prismatic TMD building blocks allows many polytypes to form. In the single layer 1 T polytype materials, one or more CDW states can form, but the pristine TMDs are not superconducting. The 2 H polytypes have two or more Fermi surfaces and saddle bands, allowing for dual orderings, which can be coexisting CDW and SC orderings, two SC gaps as in MgB2, two CDW gaps, and possibly even pseudogaps above the onset TCDW s of CDW orderings. Higher order polytypes allow for multiple CDW gaps and at least one superconducting gap. The CDW transitions TCDW s usually greatly exceed the superconducting transitions at their low Tc values, their orbital order parameters (OPs) are generally highly anisotropic and can even contain nodes, and the SC OPs can be greatly affected by their simultaneous presence. The properties of the CDWs ubiquitously seen in TMDs are remarkably similar to those of the pseudogaps seen in the high-Tc cuprates. In 2H-NbSe2, for example, the CDW renders its general s-wave SC OP orbital symmetry to be highly anisotropic and strongly reduces its Josephson coupling strength (IcRn) with the conventional SC, Pb. Hence, the pristine TMDs are highly "unconventional" in comparison with Pb, but are much more "conventional" than are the ferromagnetic superconductors such as URhGe. Applied pressure and intercalation generally suppress the TMD CDWs, allowing for enhanced SC formation, even in the 1 T polytype materials. The misfit intercalation compound (LaSe)1.14(NbSe2) and many 2 H -TMDs intercalated with organic Lewis base molecules, such as TaS2(pyridine)1/2, have completely incoherent c-axis transport, dimensional-crossover effects, and behave as stacks of intrinsic Josephson junctions

  12. Specific features of magnetostriction at electron topological transitions in metals

    NASA Astrophysics Data System (ADS)

    Mikitik, G. P.; Sharlai, Yu. V.

    2017-01-01

    The properties of magnetostriction in metals are studied in cases when the chemical potential of electrons is close to the critical energy of the electron energy spectrum, at which there is an electron topological transition of 2½ or 3½ kind. It is shown that the experimental study of magnetostriction can be an effective method for detecting these transitions in metals.

  13. Trends in Ionization Energy of Transition-Metal Elements

    ERIC Educational Resources Information Center

    Matsumoto, Paul S.

    2005-01-01

    A rationale for the difference in the periodic trends in the ionization energy of the transition-metal elements versus the main-group elements is presented. The difference is that in the transition-metal elements, the electrons enter an inner-shell electron orbital, while in the main-group elements, the electrons enter an outer-shell electron…

  14. Nanostructured transition metal oxides useful for water oxidation catalysis

    DOEpatents

    Frei, Heinz M; Jiao, Feng

    2013-12-24

    The present invention provides for a composition comprising a nanostructured transition metal oxide capable of oxidizing two H.sub.2O molecules to obtain four protons. In some embodiments of the invention, the composition further comprises a porous matrix wherein the nanocluster of the transition metal oxide is embedded on and/or in the porous matrix.

  15. Transition metal catalysis in the mitochondria of living cells

    NASA Astrophysics Data System (ADS)

    Tomás-Gamasa, María; Martínez-Calvo, Miguel; Couceiro, José R.; Mascareñas, José L.

    2016-09-01

    The development of transition metal catalysts capable of promoting non-natural transformations within living cells can open significant new avenues in chemical and cell biology. Unfortunately, the complexity of the cell makes it extremely difficult to translate standard organometallic chemistry to living environments. Therefore, progress in this field has been very slow, and many challenges, including the possibility of localizing active metal catalysts into specific subcellular sites or organelles, remain to be addressed. Herein, we report a designed ruthenium complex that accumulates preferentially inside the mitochondria of mammalian cells, while keeping its ability to react with exogenous substrates in a bioorthogonal way. Importantly, we show that the subcellular catalytic activity can be used for the confined release of fluorophores, and even allows selective functional alterations in the mitochondria by the localized transformation of inert precursors into uncouplers of the membrane potential.

  16. Transition metal catalysis in the mitochondria of living cells

    PubMed Central

    Tomás-Gamasa, María; Martínez-Calvo, Miguel; Couceiro, José R.; Mascareñas, José L.

    2016-01-01

    The development of transition metal catalysts capable of promoting non-natural transformations within living cells can open significant new avenues in chemical and cell biology. Unfortunately, the complexity of the cell makes it extremely difficult to translate standard organometallic chemistry to living environments. Therefore, progress in this field has been very slow, and many challenges, including the possibility of localizing active metal catalysts into specific subcellular sites or organelles, remain to be addressed. Herein, we report a designed ruthenium complex that accumulates preferentially inside the mitochondria of mammalian cells, while keeping its ability to react with exogenous substrates in a bioorthogonal way. Importantly, we show that the subcellular catalytic activity can be used for the confined release of fluorophores, and even allows selective functional alterations in the mitochondria by the localized transformation of inert precursors into uncouplers of the membrane potential. PMID:27600651

  17. Transition metal complexes of an isatinic quinolyl hydrazone

    PubMed Central

    2011-01-01

    Background The importance of the isatinic quinolyl hydrazones arises from incorporating the quinoline ring with the indole ring in the same compound. Quinoline ring has therapeutic and biological activities. On the other hand, isatin (1H-indole-2,3-dione) and its derivatives exhibit a wide range of biological activities. Also, the indole ring occurs in Jasmine flowers and Orange blossoms. Recently, the physiological and biological activities of quinolyl hydrazones arise from their tendency to form metal chelates with transition metal ions. In this context, we have reported to isolate, characterize and study the biological activity of some transition metal complexes of an isatinic quinolyl hydrazone; 3-[2-(4-methyl quinolin-2-yl)hydrazono] indolin-2-one. Results Mono- and binuclear as well as dimeric chelates were obtained from the reaction of a new isatinic quinolyl hydrazone with Fe(III), Co(II), Ni(II), Cu(II), VO(II) and Pd(II) ions. The ligand showed a variety of modes of bonding viz. (NNO)2-, (NO)- and (NO) per each metal ion supporting its ambidentate and flexidentate characters. The mode of bonding and basicity of the ligand depend mainly on the type of the metal cation and its counter anion. All the obtained Pd(II)- complexes have the preferable square planar geometry (D4h- symmetry) and depend mainly on the mole ratio (M:L). Conclusion The effect of the type of the metal ion for the same anion (Cl-) is obvious from either structural diversity of the isolated complexes (Oh, Td and D4h) or the various modes of bonding. The isatinic hydrazone uses its lactim form in all complexes (Cl-) except complex 5 (SO42-) in which it uses its lactam form. The obtained Pd(II)- complexes (dimeric, mono- and binuclear) are affected by the mole ratio (M:L) and have the square planar (D4h) geometry. Also, the antimicrobial activity is highly influenced by the nature of the metal ion and the order for S. aureus bacteria is as follows: Nickel(II) > Vanadyl(II) > Cobalt

  18. Critical behavior in the hydrogen insulator-metal transition

    NASA Technical Reports Server (NTRS)

    Hemley, R. J.; Mao, H. K.

    1990-01-01

    The vibrational Raman spectrum of solid hydrogen has been measured from 77 to 295 K in the vicinity of the recently observed insulator-metal transition and low-temperature phase transition at 150 gigapascals. The measurements provide evidence for a critical point in the pressure-temperature phase boundary of the low-temperature transition. The result suggests that below the critical temperature the insulator-metal transition changes from continuous to discontinuous, consistent with the general criteria originally proposed by Mott (1949) for metallization by band-gap closure. The effect of temperature on hydrogen metallization closely resembles that of the lower-pressure insulator-metal transitions in doped V2O3 alloys.

  19. Terahertz spectroscopy of the metal insulator transition in vanadium dioxide

    NASA Astrophysics Data System (ADS)

    Hilton, David; Prasankumar, Rohit; Cavalleri, Andrea; Fourmaux, Sylvain; Kieffer, Jean-Claude; Taylor, Antoinette; Averitt, Richard

    2006-03-01

    We employ terahertz spectroscopy to study the metal-insulator phase transition in vanadium dioxide (VO2 ). We measure the terahertz frequency conductivity in the metallic phase that has a real conductivity of 1000 &-1circ; cm-1 and a negligible imaginary conductivity. The observed conductivity dynamics are consistent with a photoinduced transition in spatially inhomogeneous regions of the film, followed by a thermally driven transition to the maximum conductivity.

  20. Transition metal complexes of isonicotinic acid (2-hydroxybenzylidene)hydrazide

    NASA Astrophysics Data System (ADS)

    Abou-Melha, Khlood S.

    2008-06-01

    A new series of transition metal complexes of Schiff base isonicotinic acid (2-hydroxybenzylidene)hydrazide, HL, have been synthesized. The Schiff base reacted with Cu(II), Ni(II), Co(II), Mn(II), Fe(III) and UO 2(II) ions as monobasic tridentate ligand to yield mononuclear complexes of 1:2 (metal:ligand) except that of Cu(II) which form complex of 1:1 (metal:ligand). The ligand and its metal complexes were characterized by elemental analyses, IR, UV-vis, mass and 1H NMR spectra, as well as magnetic moment, conductance measurements, and thermal analyses. All complexes have octahedral configurations except Cu(II) complex which has an extra square planar geometry distorted towards tetrahedral. While, the UO 2(II) complex has its favour hepta-coordination. The ligand and its metal complexes were tested against one strain Gram +ve bacteria ( Staphylococcus aureus), Gram -ve bacteria (Escherichia coli) , and Fungi ( Candida albicans). The tested compounds exhibited higher antibacterial activities.

  1. Transition metal complexes of isonicotinic acid (2-hydroxybenzylidene)hydrazide.

    PubMed

    Abou-Melha, Khlood S

    2008-06-01

    A new series of transition metal complexes of Schiff base isonicotinic acid (2-hydroxybenzylidene)hydrazide, HL, have been synthesized. The Schiff base reacted with Cu(II), Ni(II), Co(II), Mn(II), Fe(III) and UO2(II) ions as monobasic tridentate ligand to yield mononuclear complexes of 1:2 (metal:ligand) except that of Cu(II) which form complex of 1:1 (metal:ligand). The ligand and its metal complexes were characterized by elemental analyses, IR, UV-vis, mass and 1H NMR spectra, as well as magnetic moment, conductance measurements, and thermal analyses. All complexes have octahedral configurations except Cu(II) complex which has an extra square planar geometry distorted towards tetrahedral. While, the UO2(II) complex has its favour hepta-coordination. The ligand and its metal complexes were tested against one strain Gram +ve bacteria (Staphylococcus aureus), Gram -ve bacteria (Escherichia coli), and Fungi (Candida albicans). The tested compounds exhibited higher antibacterial activities.

  2. A liquid-liquid transition can exist in monatomic transition metals with a positive melting slope

    PubMed Central

    Lee, Byeongchan; Lee, Geun Woo

    2016-01-01

    Liquid-liquid transitions under high pressure are found in many elemental materials, but the transitions are known to be associated with either sp-valent materials or f-valent rare-earth elements, in which the maximum or a negative slope in the melting line is readily suggestive of the transition. Here we find a liquid-liquid transition with a positive melting slope in transition metal Ti from structural, electronic, and thermodynamic studies using ab-initio molecular dynamics calculations, showing diffusion anomaly, but no density anomaly. The origin of the transition in liquid Ti is a pressure-induced increase of local structures containing very short bonds with directionality in electronic configurations. This behavior appears to be characteristic of the early transition metals. In contrast, the late transition metal liquid Ni does not show the L-L transition with pressure. This result suggests that the possibility of the L-L transition decreases from early to late transition metals as electronic structures of late transition metals barely have a Jahn-Teller effect and bond directionality. Our results generalize that a phase transition in disordered materials is found with any valence band regardless of the sign of the melting slope, but related to the symmetry of electronic structures of constituent elements. PMID:27762334

  3. A liquid-liquid transition can exist in monatomic transition metals with a positive melting slope

    NASA Astrophysics Data System (ADS)

    Lee, Byeongchan; Lee, Geun Woo

    2016-10-01

    Liquid-liquid transitions under high pressure are found in many elemental materials, but the transitions are known to be associated with either sp-valent materials or f-valent rare-earth elements, in which the maximum or a negative slope in the melting line is readily suggestive of the transition. Here we find a liquid-liquid transition with a positive melting slope in transition metal Ti from structural, electronic, and thermodynamic studies using ab-initio molecular dynamics calculations, showing diffusion anomaly, but no density anomaly. The origin of the transition in liquid Ti is a pressure-induced increase of local structures containing very short bonds with directionality in electronic configurations. This behavior appears to be characteristic of the early transition metals. In contrast, the late transition metal liquid Ni does not show the L-L transition with pressure. This result suggests that the possibility of the L-L transition decreases from early to late transition metals as electronic structures of late transition metals barely have a Jahn-Teller effect and bond directionality. Our results generalize that a phase transition in disordered materials is found with any valence band regardless of the sign of the melting slope, but related to the symmetry of electronic structures of constituent elements.

  4. The nature of the bonding in the transition metal trimers

    NASA Technical Reports Server (NTRS)

    Walch, Stephen P.; Bauschlicher, Charles W., Jr.

    1986-01-01

    The electronic structure of the transition metal (TM) trimers was studied by comparing the bonding in the Ca3, Sc3, and Cu3 molecules. The complete active space SCF/externally contracted configuration interaction (CI) ratio for the low-lying states of Sc3 and Sc3(+) and the SCF/CI ratio for Ca3 and Cu3 trimers, all for near equilateral triangle geometries, were calculated. In addition, vertical excitation energies for Cu3 were computed, leading to a new assignment of the upper state in the resonant two-photon ionization spectrum. Based on these studies, bonding in other TM trimers was discussed.

  5. Magnetic properties of nanocrystalline transition metals

    NASA Astrophysics Data System (ADS)

    Aus, Martin J.

    1999-09-01

    In the past decade, considerable attention has been devoted to the nanoprocessing of magnetic materials to enhance specific magnetic properties. For nanocrystalline materials in which the grain size approaches the dimensions of the domain wall thickness of conventional materials, considerable changes in magnetic behaviour are expected. In the present work, various electrodeposited ferromagnetic nanocrystalline pure metals and alloys were characterized by using a vibrating sample magnetometer. The systems investigated include pure Ni and Co as well as alloys of Ni-P, Ni-Fe and Co-Fe. These studies explored the effect of gram size on coercivity, indicating that the crystallographic texture is more significant than gram size. In addition, these studies reported, for the first time, that saturation magnetization of pore-free electroplated bulk nanocrystalline transition metals and their alloys is relatively little affected by grain size. In contrast, previously reported results for ultra-fine particles and nanomaterials produced from compacted powders showed a strong decrease in saturation magnetization with decreasing grain size. The difference in results for pore-free electrodeposits and ultrafine particles/compacted powders has been attributed to antiferromagnetic surface oxide layers, which is a direct result of large internal porosity in the latter group of materials. Further magnetic studies were completed on nanocrystalline electrodeposits produced by magnetoelectrohydrolysis. The effects of applied magnetic field strength and substrate orientation on saturation magnetization and coercivity of Ni-Fe and Co were explored. The results have shown that both nanoprocessing and electroplating in a magnetic field can improve soft magnetic properties by lowering the coercivity. Thermomagnetic studies examined saturation magnetization as a function of temperature, Curie temperature and coercivity changes during annealing. The Curie temperatures of electrodeposited

  6. Recognition- and Reactivity-Based Fluorescent Probes for Studying Transition Metal Signaling in Living Systems

    PubMed Central

    2015-01-01

    Conspectus Metals are essential for life, playing critical roles in all aspects of the central dogma of biology (e.g., the transcription and translation of nucleic acids and synthesis of proteins). Redox-inactive alkali, alkaline earth, and transition metals such as sodium, potassium, calcium, and zinc are widely recognized as dynamic signals, whereas redox-active transition metals such as copper and iron are traditionally thought of as sequestered by protein ligands, including as static enzyme cofactors, in part because of their potential to trigger oxidative stress and damage via Fenton chemistry. Metals in biology can be broadly categorized into two pools: static and labile. In the former, proteins and other macromolecules tightly bind metals; in the latter, metals are bound relatively weakly to cellular ligands, including proteins and low molecular weight ligands. Fluorescent probes can be useful tools for studying the roles of transition metals in their labile forms. Probes for imaging transition metal dynamics in living systems must meet several stringent criteria. In addition to exhibiting desirable photophysical properties and biocompatibility, they must be selective and show a fluorescence turn-on response to the metal of interest. To meet this challenge, we have pursued two general strategies for metal detection, termed “recognition” and “reactivity”. Our design of transition metal probes makes use of a recognition-based approach for copper and nickel and a reactivity-based approach for cobalt and iron. This Account summarizes progress in our laboratory on both the development and application of fluorescent probes to identify and study the signaling roles of transition metals in biology. In conjunction with complementary methods for direct metal detection and genetic and/or pharmacological manipulations, fluorescent probes for transition metals have helped reveal a number of principles underlying transition metal dynamics. In this Account, we give

  7. Recognition- and reactivity-based fluorescent probes for studying transition metal signaling in living systems.

    PubMed

    Aron, Allegra T; Ramos-Torres, Karla M; Cotruvo, Joseph A; Chang, Christopher J

    2015-08-18

    Metals are essential for life, playing critical roles in all aspects of the central dogma of biology (e.g., the transcription and translation of nucleic acids and synthesis of proteins). Redox-inactive alkali, alkaline earth, and transition metals such as sodium, potassium, calcium, and zinc are widely recognized as dynamic signals, whereas redox-active transition metals such as copper and iron are traditionally thought of as sequestered by protein ligands, including as static enzyme cofactors, in part because of their potential to trigger oxidative stress and damage via Fenton chemistry. Metals in biology can be broadly categorized into two pools: static and labile. In the former, proteins and other macromolecules tightly bind metals; in the latter, metals are bound relatively weakly to cellular ligands, including proteins and low molecular weight ligands. Fluorescent probes can be useful tools for studying the roles of transition metals in their labile forms. Probes for imaging transition metal dynamics in living systems must meet several stringent criteria. In addition to exhibiting desirable photophysical properties and biocompatibility, they must be selective and show a fluorescence turn-on response to the metal of interest. To meet this challenge, we have pursued two general strategies for metal detection, termed "recognition" and "reactivity". Our design of transition metal probes makes use of a recognition-based approach for copper and nickel and a reactivity-based approach for cobalt and iron. This Account summarizes progress in our laboratory on both the development and application of fluorescent probes to identify and study the signaling roles of transition metals in biology. In conjunction with complementary methods for direct metal detection and genetic and/or pharmacological manipulations, fluorescent probes for transition metals have helped reveal a number of principles underlying transition metal dynamics. In this Account, we give three recent

  8. Energetic characteristics of transition metal complexes.

    PubMed

    Wojewódka, Andrzej; Bełzowski, Janusz; Wilk, Zenon; Staś, Justyna

    2009-11-15

    Ten transition metal nitrate and perchlorate complexes of hydrazine and ethylenediamine were synthesized, namely [Cu(EN)(2)](ClO(4))(2), [Co(EN)(3)](ClO(4))(3), [Ni(EN)(3)](ClO(4))(2), [Hg(EN)(2)](ClO(4))(2), [Cr(N(2)H(4))(3)](ClO(4))(3), [Cd(N(2)H(4))(3)](ClO(4))(2), [Ni(N(2)H(4))(3)](NO(3))(2), [Co(N(2)H(4))(3)](NO(3))(3), [Zn(N(2)H(4))(3)](NO(3))(2), and [Cd(N(2)H(4))(3)](NO(3))(2) based on the lines of the literature reported methods. All of them were tested with applying underwater detonation test and further compared to the typical blasting explosives: RDX, HMX, TNT and PETN. From the above presented complexes [Ni(N(2)H(4))(3)](NO(3))(2) (called NHN) and [Co(N(2)H(4))(3)](NO(3))(3) (called CoHN) are known as primary explosives and can be used as the standard explosives. Explosion parameters, such as shock wave overpressure, shock wave energy equivalent and bubble energy equivalent, were determined. Evaluated energetic characteristics of the tested compounds are comparable to those of the classic high explosives and are even enhanced in some cases.

  9. Transition-Metal Hydride Radical Cations.

    PubMed

    Hu, Yue; Shaw, Anthony P; Estes, Deven P; Norton, Jack R

    2016-08-10

    Transition-metal hydride radical cations (TMHRCs) are involved in a variety of chemical and biochemical reactions, making a more thorough understanding of their properties essential for explaining observed reactivity and for the eventual development of new applications. Generally, these species may be treated as the ones formed by one-electron oxidation of diamagnetic analogues that are neutral or cationic. Despite the importance of TMHRCs, the generally sensitive nature of these complexes has hindered their development. However, over the last four decades, many more TMHRCs have been synthesized, characterized, isolated, or hypothesized as reaction intermediates. This comprehensive review focuses on experimental studies of TMHRCs reported through the year 2014, with an emphasis on isolated and observed species. The methods used for the generation or synthesis of TMHRCs are surveyed, followed by a discussion about the stability of these complexes. The fundamental properties of TMHRCs, especially those pertaining to the M-H bond, are described, followed by a detailed treatment of decomposition pathways. Finally, reactions involving TMHRCs as intermediates are described.

  10. Transition metal-free olefin polymerization catalyst

    DOEpatents

    Sen, Ayusman; Wojcinski, II, Louis M.; Liu, Shengsheng

    2001-01-01

    Ethylene and/or propylene are polymerized to form high molecular weight, linear polymers by contacting ethylene and/or propylene monomer, in the presence of an inert reaction medium, with a catalyst system which consists essentially of (1) an aluminum alkyl component, such as trimethylaluminum, triethylaluminum, triisobutylaluminum, tri-n-octylaluminum and diethylaluminum hydride and (2) a Lewis acid or Lewis acid derivative component, such as B (C.sub.6 F.sub.5).sub.3, [(CH.sub.3).sub.2 N (H) (C.sub.6 H.sub.5)].sup.+ [B (C.sub.6 F.sub.5)4].sup.-, [(C.sub.2 H.sub.5).sub.3 NH].sup.+ [B C.sub.6 F.sub.5).sub.4 ],.sup.-, [C(C.sub.6 F.sub.5).sub.3 ].sup.+ [B(C.sub.6 F.sub.5).sub.4 ].sup.-, (C.sub.2 H.sub.5).sub.2 Al(OCH.sub.3), (C.sub.2 H.sub.5).sub.2 Al(2,6-di-t-butyl-4-methylphenoxide), (C.sub.2 H.sub.5)Al(2,6 -di-t-butylphenoxide).sub.2, (C.sub.2 H.sub.5).sub.2 Al(2,6-di-t-butylphonoxide) , 2,6 -di-t-butylphenol.multidot.methylaluminoxane or an alkylaluminoxane, and which may be completely free any transition metal component(s).

  11. The Intriguing Properties of Transition Metal Oxides

    NASA Astrophysics Data System (ADS)

    Hoch, Michael J. R.

    2007-05-01

    Since the discovery of high-temperature superconductivity in the cuprates twenty years ago, there has been a resurgence of interest in the transition metal oxides. Work on these systems has been driven both by the fascinating properties that these materials exhibit and by potential applications in technology. A brief general review of the perovskites and their electronic structures is given. This is followed by a discussion of the properties of magnetic oxide systems ABO3 (A=La; B=Mn or Co), specifically focusing on the doped manganites (e.g. La1-x SrxMnO3) and cobaltites (e.g. La1-xSrxCoO3), in which mixed valence states and double exchange are important. Competing electron localizing and delocalizing effects result in rich phase diagrams and interesting transport properties with large magnetoresistance effects. Nanoscale phase separation has been found for a range of x values using a variety of techniques, such as nuclear magnetic resonance and neutron scattering. These discoveries have provided an increased understanding of the role of the interacting magnetic, electronic and lattice structures in these systems.

  12. Properties of Transition Metal Doped Alumina

    NASA Astrophysics Data System (ADS)

    Nykwest, Erik; Limmer, Krista; Brennan, Ray; Blair, Victoria; Ramprasad, Rampi

    Crystallographic texture can have profound effects on the properties of a material. One method of texturing is through the application of an external magnetic field during processing. While this method works with highly magnetic systems, doping is required to couple non-magnetic systems with the external field. Experiments have shown that low concentrations of rare earth (RE) dopants in alumina powders have enabled this kind of texturing. The magnetic properties of RE elements are directly related to their f orbital, which can have as many as 7 unpaired electrons. Since d-block elements can have as many as 5 unpaired electrons the effects of substitutional doping of 3d transition metals (TM) for Al in alpha (stable) and theta (metastable) alumina on the local structure and magnetic properties, in addition to the energetic cost, have been calculated by performing first-principles calculations based on density functional theory. This study has led to the development of general guidelines for the magnetic moment distribution at and around the dopant atom, and the dependence of this distribution on the dopant atom type and its coordination environment. It is anticipated that these findings can aid in the selection of suitable dopants help to guide parallel experimental efforts. This project was supported in part by an internship at the Army Research Laboratory, administered by the Oak Ridge Institute for Science and Education, along with a grant of computer time from the DoD High Performance Computing Modernization Program.

  13. Porous nanoarchitectures of spinel-type transition metal oxides for electrochemical energy storage systems.

    PubMed

    Park, Min-Sik; Kim, Jeonghun; Kim, Ki Jae; Lee, Jong-Won; Kim, Jung Ho; Yamauchi, Yusuke

    2015-12-14

    Transition metal oxides possessing two kinds of metals (denoted as AxB3-xO4, which is generally defined as a spinel structure; A, B = Co, Ni, Zn, Mn, Fe, etc.), with stoichiometric or even non-stoichiometric compositions, have recently attracted great interest in electrochemical energy storage systems (ESSs). The spinel-type transition metal oxides exhibit outstanding electrochemical activity and stability, and thus, they can play a key role in realising cost-effective and environmentally friendly ESSs. Moreover, porous nanoarchitectures can offer a large number of electrochemically active sites and, at the same time, facilitate transport of charge carriers (electrons and ions) during energy storage reactions. In the design of spinel-type transition metal oxides for energy storage applications, therefore, nanostructural engineering is one of the most essential approaches to achieving high electrochemical performance in ESSs. In this perspective, we introduce spinel-type transition metal oxides with various transition metals and present recent research advances in material design of spinel-type transition metal oxides with tunable architectures (shape, porosity, and size) and compositions on the micro- and nano-scale. Furthermore, their technological applications as electrode materials for next-generation ESSs, including metal-air batteries, lithium-ion batteries, and supercapacitors, are discussed.

  14. Transition Metal Intercalators as Anticancer Agents—Recent Advances

    PubMed Central

    Deo, Krishant M.; Pages, Benjamin J.; Ang, Dale L.; Gordon, Christopher P.; Aldrich-Wright, Janice R.

    2016-01-01

    The diverse anticancer utility of cisplatin has stimulated significant interest in the development of additional platinum-based therapies, resulting in several analogues receiving clinical approval worldwide. However, due to structural and mechanistic similarities, the effectiveness of platinum-based therapies is countered by severe side-effects, narrow spectrum of activity and the development of resistance. Nonetheless, metal complexes offer unique characteristics and exceptional versatility, with the ability to alter their pharmacology through facile modifications of geometry and coordination number. This has prompted the search for metal-based complexes with distinctly different structural motifs and non-covalent modes of binding with a primary aim of circumventing current clinical limitations. This review discusses recent advances in platinum and other transition metal-based complexes with mechanisms of action involving intercalation. This mode of DNA binding is distinct from cisplatin and its derivatives. The metals focused on in this review include Pt, Ru and Cu along with examples of Au, Ni, Zn and Fe complexes; these complexes are capable of DNA intercalation and are highly biologically active. PMID:27809241

  15. Polynuclear transition metal complexes with thiocarbohydrazide and dithiocarbamates

    NASA Astrophysics Data System (ADS)

    Siddiqi, K. S.; Khan, Sadaf; Nami, Shahab A. A.; El-ajaily, M. M.

    2007-07-01

    Sn(tch) 2{MCl 2} 2 was prepared from the precursor Sn(tch) 2 and MCl 2. It was subsequently allowed to react with diethyldithiocarbamate which yielded the trinuclear complexes of the type Sn(tch) 2{M 2(dtc) 4}, where tch = thiocarbohydrazide, M = Mn(II), Fe(II), Co(II), Ni(II), Cu(II) and dtc = diethyldithiocarbamate. They were characterized on the basis of microanalytical, thermal (TGA/DSC), spectral (IR, UV-vis, EPR, 1H NMR) studies, conductivity measurement and magnetic moment data. On the basis of spectral data a tetrahedral geometry has been proposed for the halide complexes, Sn(tch) 2{MCl 2} 2 except for Cu(II) which exhibits a square planar coordination although the transition metal ion in Sn(tch) 2{M 2(dtc) 4} achieves an octahedral geometry where the dithiocarbamato moiety acts as a symmetrical bidentate ligand. The bidentate nature has been established by the appearance of a sharp single ν(C-S) around 1000 cm -1. A downfield shift observed in NH a and NH b protons on moving from Sn(tch) 2 to Sn(tch) 2{MCl 2} 2 is due to the drift of electrons toward metal atoms. A two-step pyrolysis has been observed in the Sn(tch) 2{MCl 2} 2 complexes while their dithiocarbamato derivatives exhibit a three-stage degradation pattern. Finally, the in vitro antibacterial activity of Sn(tch) 2{M 2(dtc) 4} and the mononuclear Sn(tch) 2 has been carried out on bacterial strains Escherichia coli and Salmonella typhi. The compounds were found to be active against the test organisms. The activity of the complexes is enhanced with increasing concentration. The maximum activity in both the strains was achieved by cobalt(II) dithiocarbamate complex. Minimum activity was found for Sn(tch) 2 which generally increases with the introduction of transition metal ion in the complex.

  16. Theory of the pairbreaking superconductor-metal transition in nanowires

    NASA Astrophysics Data System (ADS)

    Del Maestro, Adrian; Rosenow, Bernd; Sachdev, Subir

    2009-03-01

    We present a detailed description of a zero temperature phase transition between superconducting and diffusive metallic states in very thin wires due to a Cooper pair breaking mechanism. The dissipative critical theory contains current reducing fluctuations in the guise of both quantum and thermally activated phase slips. A full cross-over phase diagram is computed via an expansion in the inverse number of complex components of the superconducting order parameter (one in the physical case). The fluctuation corrections to the electrical ( σ) and thermal ( κ) conductivities are determined, and we find that σ has a non-monotonic temperature dependence in the metallic phase which may be consistent with recent experimental results on ultra-narrow wires. In the quantum critical regime, the ratio of the thermal to electrical conductivity displays a linear temperature dependence and thus the Wiedemann-Franz law is obeyed, with a new universal experimentally verifiable Lorenz number.

  17. Control of plasmonic nanoantennas by reversible metal-insulator transition

    SciTech Connect

    Abate, Yohannes; Marvel, Robert E.; Ziegler, Jed I.; Gamage, Sampath; Javani, Mohammad H.; Stockman, Mark I.; Haglund, Richard F.

    2015-09-11

    We demonstrate dynamic reversible switching of VO2 insulator-to-metal transition (IMT) locally on the scale of 15 nm or less and control of nanoantennas, observed for the first time in the near-field. Using polarization-selective near-field imaging techniques, we simultaneously monitor the IMT in VO2 and the change of plasmons on gold infrared nanoantennas. Structured nanodomains of the metallic VO2 locally and reversibly transform infrared plasmonic dipole nanoantennas to monopole nanoantennas. Fundamentally, the IMT in VO2 can be triggered on femtosecond timescale to allow ultrafast nanoscale control of optical phenomena. In conclusion, these unique features open up promising novel applications in active nanophotonics.

  18. The photochemistry of transition metal complexes using density functional theory.

    PubMed

    Garino, Claudio; Salassa, Luca

    2013-07-28

    The use of density functional theory (DFT) and time-dependent DFT (TD-DFT) to study the photochemistry of metal complexes is becoming increasingly important among chemists. Computational methods provide unique information on the electronic nature of excited states and their atomic structure, integrating spectroscopy observations on transient species and excited-state dynamics. In this contribution, we present an overview on photochemically active transition metal complexes investigated by DFT. In particular, we discuss a representative range of systems studied up to now, which include CO- and NO-releasing inorganic and organometallic complexes, haem and haem-like complexes dissociating small diatomic molecules, photoactive anti-cancer Pt and Ru complexes, Ru polypyridyls and diphosphino Pt derivatives.

  19. Control of plasmonic nanoantennas by reversible metal-insulator transition

    PubMed Central

    Abate, Yohannes; Marvel, Robert E.; Ziegler, Jed I.; Gamage, Sampath; Javani, Mohammad H.; Stockman, Mark I.; Haglund, Richard F.

    2015-01-01

    We demonstrate dynamic reversible switching of VO2 insulator-to-metal transition (IMT) locally on the scale of 15 nm or less and control of nanoantennas, observed for the first time in the near-field. Using polarization-selective near-field imaging techniques, we simultaneously monitor the IMT in VO2 and the change of plasmons on gold infrared nanoantennas. Structured nanodomains of the metallic VO2 locally and reversibly transform infrared plasmonic dipole nanoantennas to monopole nanoantennas. Fundamentally, the IMT in VO2 can be triggered on femtosecond timescale to allow ultrafast nanoscale control of optical phenomena. These unique features open up promising novel applications in active nanophotonics. PMID:26358623

  20. Solid–solid phase transitions via melting in metals

    PubMed Central

    Pogatscher, S.; Leutenegger, D.; Schawe, J. E. K.; Uggowitzer, P. J.; Löffler, J. F.

    2016-01-01

    Observing solid–solid phase transitions in-situ with sufficient temporal and spatial resolution is a great challenge, and is often only possible via computer simulations or in model systems. Recently, a study of polymeric colloidal particles, where the particles mimic atoms, revealed an intermediate liquid state in the transition from one solid to another. While not yet observed there, this finding suggests that such phenomena may also occur in metals and alloys. Here we present experimental evidence for a solid–solid transition via the formation of a metastable liquid in a ‘real' atomic system. We observe this transition in a bulk glass-forming metallic system in-situ using fast differential scanning calorimetry. We investigate the corresponding transformation kinetics and discuss the underlying thermodynamics. The mechanism is likely to be a feature of many metallic glasses and metals in general, and may provide further insight into phase transition theory. PMID:27103085

  1. Transition Metal and Vacancy Defect Complexes in Phosphorene

    NASA Astrophysics Data System (ADS)

    Kabir, Mukul; Babar, Rohit

    Inducing magnetic moment in otherwise nonmagnetic two-dimensional semiconducting materials is the first step to design spintronic material. Here, we study the adsorption of transition-metals on pristine and defected phosphorene, within density functional theory. We predict that increased transition-meal diffusivity on the pristine phosphorene would hinder controlled magnetism. In contrast, point-defects anchor the transiton-metal to reduce metal diffusivity. The di-vacancy complex is more important in this context due to their increased thermodynamic stability over the mono-vacancy. For most cases, the defect-transition metal complexes retain the intrinsic semiconducting properties, and induce a local moment. We provide a simple microscopic model which describe the local moment of these transition metal and defect complexes.

  2. Ultrashort Beryllium-Beryllium Distances Rivalling Those of Metal-Metal Quintuple Bonds Between Transition Metals.

    PubMed

    Yuan, Caixia; Zhao, Xue-Feng; Wu, Yan-Bo; Wang, Xiaotai

    2016-12-12

    Chemical bonding is at the heart of chemistry. Recent work on high bond orders between homonuclear transition metal atoms has led to ultrashort metal-metal (TM-TM) distances defined as dM-M <1.900 Å. The present work is a computational design and characterization of novel main group species containing ultrashort metal-metal distances (1.728-1.866 Å) between two beryllium atoms in different molecular environments, including a rhombic Be2 X2 (X=C, N) core, a vertical Be-Be axis in a 3D molecular star, and a horizontal Be-Be axis supported by N-heterocyclic carbene (NHC) ligands. The ultrashort Be-Be distances are achieved by affixing bridging atoms to attract the beryllium atoms electrostatically or covalently. Among these species are five global minima and one chemically viable diberyllium complex, which provide potential targets for experimental realization.

  3. Infrared Spectroscopy of Transition Metal-Molecular interactions in the Gas Phase

    SciTech Connect

    Duncan, Michael A.

    2008-11-14

    Transition metal-molecular complexes produced in a molecular beam are mass-selected and studied with infrared laser photodissociation spectroscopy. Metal complexes with carbon monoxide, carbon dioxide, nitrogen, water, acetylene or benzene are studied for a variety of metals. The number and intensity of infrared active bands are compared to the predictions of density functional theory calculations to derive structures, spin states and coordination numbers in these systems. These studied provide new insights into subtle details of metal-molecular interactions important in heterogeneous catalysis, metal-ligand bonding and metal ion solvation.

  4. Effects of transition metal doping in Pt/M-TiO2 (M = V, Cr, and Nb) on oxygen reduction reaction activity

    NASA Astrophysics Data System (ADS)

    Kim, Jun-Hyuk; Kwon, Gihan; Lim, Hankwon; Zhu, Chenhui; You, Hoydoo; Kim, Yong-Tae

    2016-07-01

    High cost and low durability are unresolved issues that impede the commercialization of proton exchange membrane fuel cells (PEMFCs). To overcome these limitations, Pt/TiO2 is reported as an alternative electrocatalyst for enhancing the oxygen reduction reaction (ORR) activity and/or durability of the system. However, the low electrical conductivity of TiO2 is a drawback that may be addressed by doping. To date, most reports related to Pt/doped-TiO2 focus on changes in the catalyst activity caused by the Pt-TiO2 interaction (metal-support interaction), instead of the effect of doping itself; doping is merely considered to enhance the electrical conductivity of TiO2. In this study, we discuss the variation in the electronic fine structure of Pt caused by the dopant, and its correlation with the ORR activity. More extensive contraction of the Pt lattice in Pt/M-TiO2 (M = V, Cr, and Nb) relative to Pt/TiO2 and Pt/C leads to outstanding ORR specific activity of Pt/M-TiO2. Notably, a fourfold increase of the specific activity is achieved with Pt/V-TiO2 relative to Pt/C. Furthermore, an accelerated durability test (ADT) of Pt/V-TiO2 demonstrates that this system is three times more durable than conventional Pt/C due to the metal-support interaction.

  5. Transition-Metal Substitution Doping in Synthetic Atomically Thin Semiconductors

    SciTech Connect

    Gao, Jian; Kim, Young Duck; Liang, Liangbo; Idrobo, Juan Carlos; Chow, Phil; Tan, Jiawei; Li, Baichang; Li, Lu; Sumpter, Bobby G.; Lu, Toh-Ming; Meunier, Vincent; Hone, James; Koratkar, Nikhil

    2016-09-20

    Semiconductor impurity doping has enabled an entire generation of technology. The emergence of alternative semiconductor material systems, such as transition metal dichalcogenides (TMDCs), requires the development of scalable doping strategies. We report an unprecedented one-pot synthesis for transition-metal substitution in large-area, synthetic monolayer TMDCs. Electron microscopy, optical and electronic transport characterization and ab initio calculations indicate that our doping strategy preserves the attractive qualities of TMDC monolayers, including semiconducting transport and strong direct-gap luminescence. These results are expected to encourage exploration of transition-metal substitution in two-dimensional systems, potentially enabling next-generation optoelectronic technology in the atomically-thin regime.

  6. Coordination modes of bidentate lornoxicam drug with some transition metal ions. Synthesis, characterization and in vitro antimicrobial and antibreastic cancer activity studies.

    PubMed

    Mahmoud, Walaa H; Mohamed, Gehad G; El-Dessouky, Maher M I

    2014-03-25

    The NSAID lornoxicam (LOR) drug was used for complex formation reactions with different metal salts like Cr(III), Mn(II), Fe(III) and Ni(II) chlorides and Fe(II), Co(II), Cu(II) and Zn(II) borates. Mononuclear complexes of these metals are obtained that coordinated to NO sites of LOR ligand molecule. The nature of bonding and the stereochemistry of the complexes have been deduced from elemental analyses, IR, UV-Vis, (1)H NMR, mass, electronic spectra, magnetic susceptibility and ESR spectral studies, conductivity measurements, thermogravimetric analyses (TG-DTG) and further confirmed by X-ray powder diffraction. The activation thermodynamic parameters are calculated using Coats-Redfern and Horowitz-Metzger methods. The data show that the complexes have composition of ML2 type except for Fe(II) where the type is [ML3]. The electronic absorption spectral data of the complexes suggest an octahedral geometry around the central metal ion for all the complexes. The antimicrobial data reveals that LOR ligand in solution show inhibition capacity less or sometimes more than the corresponding complexes against all the species under study. In order to establish their future potential in biomedical applications, anticancer evaluation studies against standard breast cancer cell lines (MCF7) was performed using different concentrations. The obtained results indicate high inhibition activity for Cr(III), Fe(II) and Cu(II) complexes against breast cancer cell line (MCF7) and recommends them for testing as antitumor agents.

  7. Coordination modes of bidentate lornoxicam drug with some transition metal ions. Synthesis, characterization and in vitro antimicrobial and antibreastic cancer activity studies

    NASA Astrophysics Data System (ADS)

    Mahmoud, Walaa H.; Mohamed, Gehad G.; El-Dessouky, Maher M. I.

    2014-03-01

    The NSAID lornoxicam (LOR) drug was used for complex formation reactions with different metal salts like Cr(III), Mn(II), Fe(III) and Ni(II) chlorides and Fe(II), Co(II), Cu(II) and Zn(II) borates. Mononuclear complexes of these metals are obtained that coordinated to NO sites of LOR ligand molecule. The nature of bonding and the stereochemistry of the complexes have been deduced from elemental analyses, IR, UV-Vis, 1H NMR, mass, electronic spectra, magnetic susceptibility and ESR spectral studies, conductivity measurements, thermogravimetric analyses (TG-DTG) and further confirmed by X-ray powder diffraction. The activation thermodynamic parameters are calculated using Coats-Redfern and Horowitz-Metzger methods. The data show that the complexes have composition of ML2 type except for Fe(II) where the type is [ML3]. The electronic absorption spectral data of the complexes suggest an octahedral geometry around the central metal ion for all the complexes. The antimicrobial data reveals that LOR ligand in solution show inhibition capacity less or sometimes more than the corresponding complexes against all the species under study. In order to establish their future potential in biomedical applications, anticancer evaluation studies against standard breast cancer cell lines (MCF7) was performed using different concentrations. The obtained results indicate high inhibition activity for Cr(III), Fe(II) and Cu(II) complexes against breast cancer cell line (MCF7) and recommends them for testing as antitumor agents.

  8. Synthesis, spectroscopic characterization, electrochemical behaviour, reactivity and antibacterial activity of some transition metal complexes with 2-( N-salicylideneamino)-3-carboxyethyl-4,5-dimethylthiophene

    NASA Astrophysics Data System (ADS)

    Daniel, Varughese P.; Murukan, B.; Kumari, B. Sindhu; Mohanan, K.

    2008-07-01

    Mn(II), Fe(II), Co(II), Ni(II), Cu(II) and Zn(II) complexes with a potentially tridentate Schiff base, formed by condensation of 2-amino-3-carboxyethyl-4,5-dimethylthiophene with salicylaldehyde were synthesized and characterized on the basis of elemental analyses, molar conductance values, magnetic susceptibility measurements, UV-vis, IR, EPR and NMR spectral data, wherever possible and applicable. Spectral studies reveal that the free ligand exists in a bifunctionally hydrogen bonded manner and coordinates to the metal ion in a tridentate fashion through the deprotonated phenolate oxygen, azomethine nitrogen and ester carbonyl group. On the basis of electronic spectral data and magnetic susceptibility measurements, suitable geometry has been proposed for each complex. The EPR spectral data of the Cu(II) complex showed that the metal-ligand bonds have considerable covalent character. The Ni(II) complex has undergone facile transesterification reaction when refluxed in methanol for a lengthy period. X-ray diffraction studies of Cu(II) complex showed that the complex has an orthorhombic crystal lattice. In view of the biological activity of thiophene derivatives, the ligand and the complexes were subjected to antibacterial screening. It has been observed that the antibacterial activity of the ligand increased on chelation with metal ion.

  9. Synthesis, spectroscopic studies, thermal analyses, biological activity of tridentate coordinated transition metal complexes of bi(pyridyl-2-ylmethyl)amine]ligand

    NASA Astrophysics Data System (ADS)

    Abd El-Halim, Hanan F.; Mohamed, Gehad G.

    2016-01-01

    A new tridentate acyclic pincer ligand, [bi(pyridin-2-methyl)amine] (bpma, HL), was synthesized and reacted to form complexes with copper(II), nickel(II), iron(II), cobalt(II) and zinc(II) ions. Both the ligand and its complexes were characterized using elemental analysis, molar conductance, infrared, 1H-NMR-spectroscopy, mass and thermal analyses. According to the spectroscopic data, all of the complexes share the same coordination environment around the metal atoms, consisting two nitrogen-pyridine entities, one nitrogen-methylamine entity, one/two water molecules and/or one/two chloride or bromide ions. Complexes also showed molar conductivity according to the presence of two halide anions outer the coordination sphere except Co(II) and Zn(II) complexes are non electrolytes. Analysis indicates that the metal ions have trigonal bipyramidal structure. Cu(II), Ni(II), Fe(II), Co(II), and Zn(II) metal complexes were screened for their antibacterial activity against Bacillus subtilis, Staphylococcus aureus (G+) and Escherichia coli, and Pseudomonas aeruginosa (G-) bacteria. They showed remarkable antimicrobial activity.

  10. Transition-metal-catalyzed synthesis of phenols and aryl thiols

    PubMed Central

    Liu, Shasha

    2017-01-01

    Phenols and aryl thiols are fundamental building blocks in organic synthesis and final products with interesting biological activities. Over the past decades, substantial progress has been made in transition-metal-catalyzed coupling reactions, which resulted in the emergence of new methods for the synthesis of phenols and aryl thiols. Aryl halides have been extensively studied as substrates for the synthesis of phenols and aryl thiols. In very recent years, C–H activation represents a powerful strategy for the construction of functionalized phenols directly from various arenes. However, the synthesis of aryl thiols through C–H activation has not been reported. In this review, a brief overview is given of the recent advances in synthetic strategies for both phenols and aryl thiols.

  11. Process for making transition metal nitride whiskers

    DOEpatents

    Bamberger, C.E.

    1988-04-12

    A process for making metal nitrides, particularly titanium nitride whiskers, using a cyanide salt as a reducing agent for a metal compound in the presence of an alkali metal oxide. Sodium cyanide, various titanates and titanium oxide mixed with sodium oxide react to provide titanium nitride whiskers that can be used as reinforcement to ceramic composites. 1 fig., 1 tab.

  12. Process for making transition metal nitride whiskers

    DOEpatents

    Bamberger, Carlos E.

    1989-01-01

    A process for making metal nitrides, particularly titanium nitride whiskers, using a cyanide salt as a reducing agent for a metal compound in the presence of an alkali metal oxide. Sodium cyanide, various titanates and titanium oxide mixed with sodium oxide react to provide titanium nitride whiskers that can be used as reinforcement to ceramic composites.

  13. Chiral phase transition in lattice QCD as a metal-insulator transition

    SciTech Connect

    Garcia-Garcia, Antonio M.; Osborn, James C.

    2007-02-01

    We investigate the lattice QCD Dirac operator with staggered fermions at temperatures around the chiral phase transition. We present evidence of a metal-insulator transition in the low lying modes of the Dirac operator around the same temperature as the chiral phase transition. This strongly suggests the phenomenon of Anderson localization drives the QCD vacuum to the chirally symmetric phase in a way similar to a metal-insulator transition in a disordered conductor. We also discuss how Anderson localization affects the usual phenomenological treatment of phase transitions a la Ginzburg-Landau.

  14. Correlation between oxygen adsorption energy and electronic structure of transition metal macrocyclic complexes

    SciTech Connect

    Liu, Kexi; Lei, Yinkai; Wang, Guofeng

    2013-11-28

    Oxygen adsorption energy is directly relevant to the catalytic activity of electrocatalysts for oxygen reduction reaction (ORR). In this study, we established the correlation between the O{sub 2} adsorption energy and the electronic structure of transition metal macrocyclic complexes which exhibit activity for ORR. To this end, we have predicted the molecular and electronic structures of a series of transition metal macrocyclic complexes with planar N{sub 4} chelation, as well as the molecular and electronic structures for the O{sub 2} adsorption on these macrocyclic molecules, using the density functional theory calculation method. We found that the calculated adsorption energy of O{sub 2} on the transition metal macrocyclic complexes was linearly related to the average position (relative to the lowest unoccupied molecular orbital of the macrocyclic complexes) of the non-bonding d orbitals (d{sub z{sup 2}}, d{sub xy}, d{sub xz}, and d{sub yz}) which belong to the central transition metal atom. Importantly, our results suggest that varying the energy level of the non-bonding d orbitals through changing the central transition metal atom and/or peripheral ligand groups could be an effective way to tuning their O{sub 2} adsorption energy for enhancing the ORR activity of transition metal macrocyclic complex catalysts.

  15. Correlation between oxygen adsorption energy and electronic structure of transition metal macrocyclic complexes.

    PubMed

    Liu, Kexi; Lei, Yinkai; Wang, Guofeng

    2013-11-28

    Oxygen adsorption energy is directly relevant to the catalytic activity of electrocatalysts for oxygen reduction reaction (ORR). In this study, we established the correlation between the O2 adsorption energy and the electronic structure of transition metal macrocyclic complexes which exhibit activity for ORR. To this end, we have predicted the molecular and electronic structures of a series of transition metal macrocyclic complexes with planar N4 chelation, as well as the molecular and electronic structures for the O2 adsorption on these macrocyclic molecules, using the density functional theory calculation method. We found that the calculated adsorption energy of O2 on the transition metal macrocyclic complexes was linearly related to the average position (relative to the lowest unoccupied molecular orbital of the macrocyclic complexes) of the non-bonding d orbitals (d(z(2)), d(xy), d(xz), and d(yz)) which belong to the central transition metal atom. Importantly, our results suggest that varying the energy level of the non-bonding d orbitals through changing the central transition metal atom and/or peripheral ligand groups could be an effective way to tuning their O2 adsorption energy for enhancing the ORR activity of transition metal macrocyclic complex catalysts.

  16. Transition metal complexes of buparvaquone as potent new antimalarial agents. 1. Synthesis, X-ray crystal-structures, electrochemistry and antimalarial activity against Plasmodium falciparum.

    PubMed

    Gokhale, Nikhil H; Padhye, Subhash B; Croft, Simon L; Kendrick, Howard D; Davies, Wendy; Anson, Christopher E; Powell, Annie K

    2003-07-01

    New Cu(II), Ni(II), Co(II), Fe(II), and Mn(II) metal complexes of buparvaquone [3-trans(4-tert.-butylcyclohexyl)methyl-2-hydroxy-1,4-naphthoquione] (L1H) have been synthesized and characterized using IR, electron paramagnetic resonance (EPR) spectroscopy, microanalytical methods and single crystal X-ray diffraction methods. The single crystal structures were determined for ligand L1H [space group P-1 with a=6.2072(14) A, b=10.379 (2) A, c=13.840 (3) A, V=878.7(3) A(3), Z=2, D(calcd.)=1.234 mg/m(3)] and copper complex [Cu(L1)(2)(C(2)H(5)OH)(2)] C1 [space group I2/a with a=17.149(14) A, b=9.4492(8) A, c=26.946(3) A, V=4335.3(7)A(3), Z=4, D(calcd.)=1.233 mg/m(3)]. All the metal complexes along with the parent ligand have been studied for their electrochemical properties using cyclic voltammetric techniques. The compounds were tested for their in vitro antimalarial activity against Plasmodium falciparum strains. A correlation between the antimalarial activity and the redox property of these complexes is presented. The copper complex C1 exhibits significantly higher growth inhibitory activity both in vitro and in vivo than the parent ligand.

  17. Quinoxaline based bio-active mixed ligand transition metal complexes: Synthesis, characterization, electrochemical, antimicrobial, DNA binding, cleavage, antioxidant and molecular docking studies.

    PubMed

    Dhanaraj, C Justin; Johnson, Jijo

    2015-10-01

    Co(II), Ni(II), Cu(II) and Zn(II) mixed ligand complexes have been synthesized from N(2), N(3)-bis(4-nitrophenyl)quinoxaline-2,3-diamine and 1,10-phenanthroline. The compounds were characterized by elemental analyses, molar conductance, magnetic susceptibility, IR, UV-Vis., (1)H NMR, mass and ESR spectra. Octahedral geometry has been assigned for Co(II), Ni(II) and Zn(II) complexes and distorted octahedral geometry for Cu(II) complex. Electrochemical behavior of the synthesized complexes was studied using cyclic voltammetry. Grain size and surface morphologies of the complexes were determined by powder XRD and SEM analyses. The mixed ligand metal complexes were screened for antimicrobial activity against bacterial species Escherichia coli, Klebsiella pneumoniae, Pseudomonas aeruginosa and Staphylococcus aureus; fungal species Aspergillus niger, and Candida albicans by disc diffusion method. The DNA binding and DNA cleavage activities of the compounds were determined using electronic absorption titration and agarose gel electrophoresis respectively. The superoxide radical scavenging and free radical scavenging activities of the Cu(II) complex was also evaluated. Molecular docking studies of the synthesized mixed ligand metal complexes were carried out against B-DNA dodecamer and the protein Plasmodium falciparum dihydrofolate reductase (pf DHFR).

  18. Synthesis, spectroscopic studies and inhibitory activity against bactria and fungi of acyclic and macrocyclic transition metal complexes containing a triamine coumarine Schiff base ligand

    NASA Astrophysics Data System (ADS)

    Abou-Hussein, A. A.; Linert, Wolfgang

    2015-04-01

    Two series of new mono and binuclear complexes with a Schiff base ligand derived from the condensation of 3-acetylcoumarine and diethylenetriamine, in the molar ratio 2:1 have been prepared. The ligand was characterized by elemental analysis, IR, UV-visible, 1H-NMR and mass spectra. The reaction of the Schiff base ligand with cobalt(II), nickel(II), copper(II), zinc(II) and oxovanadium(IV) lead to mono or binuclear species of cyclic or macrocyclic complexes, depending on the mole ratio of metal to ligand and as well as on the method of preparation. The Schiff base ligand behaves as a cyclic bidentate, tetradendate or pentaentadentae ligand. The formation of macrocyclic complexes depends significantly on the dimension of the internal cavity, the rigidity of the macrocycles, the nature of its donor atoms and on the complexing properties of the anion involved in the coordination. Electronic spectra and magnetic moments of the complexes indicate that the geometries of the metal centers are either square pyramidal or octahedral for acyclic or macro-cyclic complexes. The structures are consistent with the IR, UV-visible, ESR, 1H-NMR, mass spectra as well as conductivity and magnetic moment measurements. The Schiff base ligand and its metal complexes were tested against two pathogenic bacteria as Gram-positive and Gram-negative bacteria as well as one kind of fungi. Most of the complexes exhibit mild antibacterial and antifungal activities against these organisms.

  19. Mechanisms of transition-metal gettering in silicon

    SciTech Connect

    MYERS JR.,SAMUEL M.; SEIBT,M.; SCHROTER,W.

    2000-03-23

    The atomic process, kinetics, and equilibrium thermodynamics underlying the gettering of transition-metal impurities in Si are reviewed from a mechanistic perspective. Methods for mathematical modeling of gettering are reviewed and illustrated. Needs for further research are discussed.

  20. Electrolytic separation of crystals of transition-metal oxides

    NASA Technical Reports Server (NTRS)

    Arnott, R. J.; Feretti, A.; Kunnamann, W.

    1969-01-01

    Versatile flux system grows large, well-formed, stoichiometric single crystals of mixed oxides of the transition-metal elements. These crystals have important uses in the microwave field, and applications as lasers and masers in communications.

  1. Atomic Natural Orbital Basis Sets for Transition Metals

    NASA Technical Reports Server (NTRS)

    Bauschlicher, Charles W., Jr.; Taylor, Peter R.

    1993-01-01

    We show that atomic natural orbitals are an excellent way to contract transition-metal basis sets, even though the different low-lying electronic states may have very different basis set requirements.

  2. Peruvian perovskite Between Transition-metal to PGM/PlatinumGroupMetal Catalytic Fusion

    NASA Astrophysics Data System (ADS)

    Maksoed, Wh-

    2016-11-01

    Strongly correlated electronic materials made of simple building blocks, such as a transition-metal ion in an octahedral oxygen cage forming a perovskite structure- Dagotto & Tokura for examples are the high-temperature superconductivity & the CMR/Colossal Magnetoresistance . Helium-4 denotes from LC Case,ScD: "Catalytic Fusion of Deuterium into Helium-4"- 1998 dealt with gaseous D2- "contacted with a supported metallic catalyst at superatmospheric pressure". The catalyst is a platinum-group metal, at about 0.5% - 1% by weight, on activated C. Accompanies Stephen J Geier, 2010 quotes "transition metal complexes", the Energy thus produced is enormous, and because the deuterium is very cheap in the form of heavy water (less than US 1/g), the fuel cost is very low (<<1 %/KwH). "The oceans contain enough deuterium to satisfy the Earth's energy needs for many millions of year" to keep "maria"/Latin name of seas &Deuteronomy to be eternally preserves. Heartfelt Gratitudes to HE. Mr. Prof. Ir. HANDOJO.

  3. Early Transition Metal Alkyl and Tetrahydroborate Complexes.

    NASA Astrophysics Data System (ADS)

    Jensen, James Allen

    1988-06-01

    An investigation of early transition metal alkyl and tetrahydroborate complexes as catalytic models and ceramic precursors has been initiated. The compounds MX _2 (dmpe)_2, dmpe = 1,2-bis(dimethylphosphino)ethane, for M = Ti, V, Cr, and X = Br, I, BH_4, have been prepared. These complexes are paramagnetic and have been shown by X-ray crystallography to have trans-octahedral structures. The BH_4^{-} groups in Ti(BH_4)_2(dmpe) _2 bond to the metal in a bidentate manner. This structure is in marked contrast to the structure of the vanadium analogue, V(BH_4)_2 (dmpe)_2, which displays two unidentate BH_4^{-} groups. Alkylation of Ti(BH_4)_2 (dmpe)_2 with LiMe results in the complex TiMe_2(dmpe) _2 which is diamagnetic in both solution and solid state. Single crystal X-ray and neutron diffraction studies show that there may be strong Ti-C pi -bonding. A tetragonal compression along the C -Ti-C bond vector accounts for the observed diamegnetism. A series of complexes of the formula Ti(BH _4)_3(PR_3)_2 has been prepared where PR_3 = PMe_3, PEt_3, PMe_3Ph, and P(OMe)_3 . The X-ray crystal structure of Ti(BH _4)_3(PMe_3)_2 reveals a pseudo trigonal bipyramidal geometry in which two BH_4^{-} groups display an unusual "side-on" bonding mode. The "side-on" ligation mode has been attributed to a Jahn-Teller distortion of the orbitally degenerate d^1 ground state. In contrast, the non-Jahn-Teller susceptible vanadium analogue, V(BH_4)_3 (PMe_3)_2, possesses a nearly ideal D_{rm 3h} >=ometry with three bidentate tetrahydroborate groups. Addition of excess PMe_3 to V(BH_4)_3(PMe _3)_2<=ads to the vanadium(II) hydride -bridged dimer (V(H)(BH_4)(PMe _3)_2]_2, while addition of PMe_3 and water forms the vanadium(III) oxo dimer (V(BH_4)_2 (PMe_3)_2]_2 [mu-O) which has been structurally characterized. The compound Ti(CH_2CMe _3)_4 can be prepared by addition of Ti(OEt)_4 to LiCH_2 CMe_3. Sublimation of Ti(CH _2CMe_3)_4 over a substrate heated to 250^ circC results in the chemical vapor

  4. Electron Devices Based on Transition Metal Dichalcogenides

    NASA Astrophysics Data System (ADS)

    Tosun, Mahmut

    Integrated circuits consists of building blocks called transistors. A transistor is a switch that enables logic operations to perform computing. Since the invention of the first integrated circuit, transistors have been scaled down in their dimensions to increase the density of transistors per unit area to enable more functionality. Transistor scaling is continued by introducing novel device structures and materials at each technology node. Due to the challenges such as short channel effects and the power consumption issues, novel materials are investigated as a candidate for next generation transistors. In this thesis, 2-dimensinal layered semiconductors, namely transition metal dichalcogenides (TMDCs) are studied to assess their electronic material properties as a candidate channel material for next generation electronic devices. Chapter one, introduces the challenges in the state of the art MOSFET devices. Then the motivation for the use of TMDCs in MOSFETs is explained. In chapter two, doping of the TMDCs is studied to be able to probe the intrinsic electronic properties of the devices fabricated using these materials. Contact resistance can be decreased by doping and TMDC MOSFETs with near-ideal performance metrics are demonstrated. In chapter three the CMOS integration of the devices using TMDCs are examined. Logic operations are conducted by fabricating WSe 2 n-FETs and p-FETs on the same flake. Then vertical 3-dimensional integration of n-FETs and p-FETs are demonstrated using the same gate. These transistors are connected as a CMOS inverter and logic operations are performed. Chapter four presents the band structure engineering study using TMDCs. Mono-multilayer MoS2 junctions are found to have a type-I heterojunction. Optoelectronic properties of this junction are investigated and the junction is shown to have a photoresponse that dominates the photoresponse coming from the contacts. In chapter five, the tunneling devices using TMDCs are studied. Dual

  5. DNA breakage induced by 1,2,4-benzenetriol: relative contributions of oxygen-derived active species and transition metal ions.

    PubMed

    Li, A S; Bandy, B; Tsang, S; Davison, A J

    2001-05-01

    We report here the relative roles of metals and selected reactive oxygen species in DNA damage by the genotoxic benzene metabolite 1,2,4-benzenetriol, and the interactions of antioxidants in affording protection. 1,2,4-Benzenetriol induces scission in supercoiled phage DNA in neutral aqueous solution with an effective dose (ED(50)) of 6.7 microM for 50% cleavage of 2.05 microg/ml supercoiled PM2 DNA. In decreasing order of effectiveness: catalase (20 U/ml), formate (25 mM), superoxide dismutase (20 U/ml), and mannitol (50 mM) protected, from 85 to 28%. Evidently, H(2)O(2) is the dominant active species, with O(2)(*)(-) and *OH playing subordinate roles. Desferrioxamine or EDTA inhibited DNA breakage by 81-85%, despite accelerating 1,2,4-benzenetriol autoxidation. Consistent with this suggestion of a crucial role for metals, addition of cupric, cuprous, ferric, or ferrous ions enhanced DNA breakage, with copper being more active than iron. Combinations of scavengers protected more effectively than any single scavenger alone, with implications for antioxidants acting in concert in living cells. Synergistic combinations were superoxide dismutase with *OH scavengers, superoxide dismutase with desferrioxamine, and catalase with desferrioxamine. Antagonistic (preemptive) combinations were catalase with superoxide dismutase, desferrioxamine with *OH scavengers, and catalase with *OH scavengers. The most striking aspect of synergism was the extent to which metal chelation (desferrioxamine) acted synergistically with either catalase or superoxide dismutase to provide virtually complete protection. Concluding, 1,2,4-benzenetriol-induced DNA damage occurs mainly by site-specific, Fenton-type mechanisms, involving synergism between several reactive intermediates. Multiple antioxidant actions are needed for effective protection.

  6. Synthesis, spectroscopic characterisation, DNA cleavage, superoxidase dismutase activity and antibacterial properties of some transition metal complexes of a novel bidentate Schiff base derived from isatin and 2-aminopyrimidine.

    PubMed

    Nitha, L P; Aswathy, R; Mathews, Niecy Elsa; Kumari, B Sindhu; Mohanan, K

    2014-01-24

    Complexes of manganese(II), cobalt(II), nickel(II), copper(II) and zinc(II) with a Schiff base, formed by the condensation of isatin with 2-aminopyrimidine have been synthesised and characterised through elemental analysis, molar conductance measurements, magnetic susceptibility, IR, UV-Vis, (1)HNMR, FAB mass and EPR spectral studies. The spectral data revealed that the ligand acts as neutral bidentate, coordinating to the metal ion through the carbonyl oxygen and azomethine nitrogen. Molar conductance values adequately support the electrolytic nature of the complexes. On the basis of the above observations the complexes have been formulated as [M(ISAP)2]X2, where M=Mn(II), Co(II), Ni(II), Cu(II) and Zn(II); X=Cl, OAc; ISAP=2-[N-indole-2-one]aminopyrimidine. The ligand and copper(II) complex were subjected to X-ray diffraction studies. The DNA cleavage study was monitored by gel electrophoresis method. The superoxide dismutase (SOD) mimetic activities of the ligand and the metal complexes were checked using NBT assay. The in vitro antibacterial activity of the synthesized compounds has been tested against gram negative and gram positive bacteria.

  7. Synthesis, spectroscopic characterisation, DNA cleavage, superoxidase dismutase activity and antibacterial properties of some transition metal complexes of a novel bidentate Schiff base derived from isatin and 2-aminopyrimidine

    NASA Astrophysics Data System (ADS)

    Nitha, L. P.; Aswathy, R.; Mathews, Niecy Elsa; Sindhu kumari, B.; Mohanan, K.

    2014-01-01

    Complexes of manganese(II), cobalt(II), nickel(II), copper(II) and zinc(II) with a Schiff base, formed by the condensation of isatin with 2-aminopyrimidine have been synthesised and characterised through elemental analysis, molar conductance measurements, magnetic susceptibility, IR, UV-Vis, 1HNMR, FAB mass and EPR spectral studies. The spectral data revealed that the ligand acts as neutral bidentate, coordinating to the metal ion through the carbonyl oxygen and azomethine nitrogen. Molar conductance values adequately support the electrolytic nature of the complexes. On the basis of the above observations the complexes have been formulated as [M(ISAP)2]X2, where M = Mn(II), Co(II), Ni(II), Cu(II) and Zn(II); X = Cl, OAc; ISAP = 2-[N-indole-2-one]aminopyrimidine. The ligand and copper(II) complex were subjected to X-ray diffraction studies. The DNA cleavage study was monitored by gel electrophoresis method. The superoxide dismutase (SOD) mimetic activities of the ligand and the metal complexes were checked using NBT assay. The in vitro antibacterial activity of the synthesized compounds has been tested against gram negative and gram positive bacteria.

  8. Synthesis, characterization and antimicrobial activities of mixed ligand transition metal complexes with isatin monohydrazone Schiff base ligands and heterocyclic nitrogen base

    NASA Astrophysics Data System (ADS)

    Devi, Jai; Batra, Nisha

    2015-01-01

    Mixed ligand complexes of Co(II), Ni(II), Cu(II) and Zn(II) with various uninegative tridentate ligands derived from isatin monohydrazone with 2-hydroxynapthaldehyde/substituted salicylaldehyde and heterocyclic nitrogen base 8-hydroxyquinoline have been synthesized and characterized by elemental analysis, conductometric studies, magnetic susceptibility and spectroscopic techniques (IR, UV-VIS, NMR, mass and ESR). On the basis of these characterizations, it was revealed that Schiff base ligands existed as monobasic tridentate ONO bonded to metal ion through oxygen of carbonyl group, azomethine nitrogen and deprotonated hydroxyl oxygen and heterocyclic nitrogen base 8-hydroxyquinoline existed as monobasic bidentate ON bonded through oxygen of hydroxyl group and nitrogen of quinoline ring with octahedral or distorted octahedral geometry around metal ion. All the compounds have been tested in vitro against various pathogenic Gram positive bacteria, Gram negative bacteria and fungi using different concentrations (25, 50, 100, 200 μg/mL) of ligands and their complexes. Comparative study of antimicrobial activity of ligands, and their mixed complexes indicated that complexes exhibit enhanced activity as compared to free ligands and copper(II) Cu(LIV)(Q)ṡH2O complex was found to be most potent antimicrobial agent.

  9. Synthesis, spectroscopic studies, antimicrobial activities and antitumor of a new monodentate V-shaped Schiff base and its transition metal complexes.

    PubMed

    Ramadan, Ramadan M; Abu Al-Nasr, Ahmad K; Noureldeen, Amani F H

    2014-11-11

    Reaction of 4-aminoacetophenone and 4-bromobenzaldehyde in ethanol resulted in the formation of the monodentate V-shaped Schiff base (E)-1-(4-((4-bromo-benzylidene)amino)phenyl)ethanone (L). Interaction of L with different di- and trivalent metal ions revealed disubstituted derivatives. The ligand and its complexes were characterized by elemental analysis, mass, IR and NMR spectrometry. Biological activities of the ligand and complexes against the Escherchia coli and Staphylococcus aureus bacterias, and the two fungus Aspergillus flavus and Candida albicans were screened. The cytotoxicity of the compounds were checked as antitumor agents on liver carcinoma cell line (HepG2). They exhibited in vitro broad range of antitumor activities towards the cell line; the [ZnL2(H2O)2](NO3)2 complex was stronger antitumor towards HepG2 cell line as well as two breast cancer cell lines (MCF7 and T47D) relative to cis-platin.

  10. Synthesis, spectroscopic studies, antimicrobial activities and antitumor of a new monodentate V-shaped Schiff base and its transition metal complexes

    NASA Astrophysics Data System (ADS)

    Ramadan, Ramadan M.; Abu Al-Nasr, Ahmad K.; Noureldeen, Amani F. H.

    2014-11-01

    Reaction of 4-aminoacetophenone and 4-bromobenzaldehyde in ethanol resulted in the formation of the monodentate V-shaped Schiff base (E)-1-(4-((4-bromo-benzylidene)amino)phenyl)ethanone (L). Interaction of L with different di- and trivalent metal ions revealed disubstituted derivatives. The ligand and its complexes were characterized by elemental analysis, mass, IR and NMR spectrometry. Biological activities of the ligand and complexes against the Escherchia coli and Staphylococcus aureus bacterias, and the two fungus Aspergillus flavus and Candida albicans were screened. The cytotoxicity of the compounds were checked as antitumor agents on liver carcinoma cell line (HepG2). They exhibited in vitro broad range of antitumor activities towards the cell line; the [ZnL2(H2O)2](NO3)2 complex was stronger antitumor towards HepG2 cell line as well as two breast cancer cell lines (MCF7 and T47D) relative to cis-platin.

  11. Electron-phonon coupling and structural phase transitions in early transition metal oxides and chalcogenides

    NASA Astrophysics Data System (ADS)

    Farley, Katie Elizabeth

    promising catalyst for electrocatalytic water splitting and can catalyze the hydrogen evolution reaction that is utilized within photoelectrochemical cells. Chapters 4 and 5 delve into the synthesis and doping of VO2, which undergoes a metal to insulator transition. Chapter 4 develops a detailed understanding of the influence of doping on the MIT and reports the activation energies of the monoclinic→rutile (insulator→metal) and rutile→monoclinic (metal?insulator) transitions. The dynamical effects of doping on hysteresis are considered for both Mo- and W-doped VO2. Chapter 5 reports the development of synthetic route to produce optical grade VO2 with considerable size control. Smart window applications for this material require small particle sizes in order to reduce visible light scattering. This chapter systematically explores hydrothermal syntheses for the preparation of VO2 and allows for development of mechanistic postulates for obtaining size control.

  12. Bi-phase transition diagrams of metallic thin multilayers

    SciTech Connect

    Li, J.C.; Liu, W.; Jiang, Q. . E-mail: jiangq@jlu.edu.cn

    2005-02-01

    Phase transitions of metallic multilayers induced by differences in interface energy are considered thermodynamically, based on a thermodynamic model for interface energy and the Goldschmidt premise for lattice contraction. Bi-phase transition diagrams of Co/Cr, Zr/Nb, Ti/Nb and Ti/Al multilayers are constructed, which are in agreement with experimental results.

  13. [Non-empirical interatomic potentials for transition metals]. Progress report

    SciTech Connect

    Not Available

    1993-05-01

    The report is divided into the following sections: potential-energy functions for d-band metals, potential-energy functions for aluminides and quasicrystals, electronic structure of complex structures and quasicrystals, potential-energy functions in transition-metal oxides, applications to defect structure and mechanical properties, and basic theory of interatomic potentials.

  14. [Non-empirical interatomic potentials for transition metals

    SciTech Connect

    Not Available

    1993-01-01

    The report is divided into the following sections: potential-energy functions for d-band metals, potential-energy functions for aluminides and quasicrystals, electronic structure of complex structures and quasicrystals, potential-energy functions in transition-metal oxides, applications to defect structure and mechanical properties, and basic theory of interatomic potentials.

  15. The transition to the metallic state in low density hydrogen.

    PubMed

    McMinis, Jeremy; Morales, Miguel A; Ceperley, David M; Kim, Jeongnim

    2015-11-21

    Solid atomic hydrogen is one of the simplest systems to undergo a metal-insulator transition. Near the transition, the electronic degrees of freedom become strongly correlated and their description provides a difficult challenge for theoretical methods. As a result, the order and density of the phase transition are still subject to debate. In this work, we use diffusion quantum Monte Carlo to benchmark the transition between paramagnetic and anti-ferromagnetic body centered cubic atomic hydrogen in its ground state. We locate the density of the transition by computing the equation of state for these two phases and identify the phase transition order by computing the band gap near the phase transition. These benchmark results show that the phase transition is continuous and occurs at a Wigner-Seitz radius of rs = 2.27(3) a0. We compare our results to previously reported density functional theory, Hedin's GW approximation, and dynamical mean field theory results.

  16. Dielectric breakdown and avalanches at nonequilibrium metal-insulator transitions.

    PubMed

    Shekhawat, Ashivni; Papanikolaou, Stefanos; Zapperi, Stefano; Sethna, James P

    2011-12-30

    Motivated by recent experiments on the finite temperature Mott transition in VO(2) films, we propose a classical coarse-grained dielectric breakdown model where each degree of freedom represents a nanograin which transitions from insulator to metal with increasing temperature and voltage at random thresholds due to quenched disorder. We describe the properties of the resulting nonequilibrium metal-insulator transition and explain the universal characteristics of the resistance jump distribution. We predict that by tuning voltage, another critical point is approached, which separates a phase of boltlike avalanches from percolationlike ones.

  17. Trion formation dynamics in monolayer transition metal dichalcogenides

    SciTech Connect

    Singh, Akashay; Moody, Galan; Schaibley, John R.; Yan, Jiaqiang; Mandrus, David G.; Xu, Xiaodong; Li, Xiaoqun; Tran, Kha; Scott, Marie E.; Overbeck, Vincent; Berghauser, Gunnar; Seifert, Edward J.; Pleskot, Dennis; Gabor, Nathaniel M.; Richter, Marten; Malic, Ermin

    2016-01-05

    Here, we report charged exciton (trion) formation dynamics in doped monolayer transition metal dichalcogenides, specifically molybdenum diselenide (MoSe2), using resonant two-color pump-probe spectroscopy. When resonantly pumping the exciton transition, trions are generated on a picosecond time scale through exciton-electron interaction. As the pump energy is tuned from the high energy to low energy side of the inhomogeneously broadened exciton resonance, the trion formation time increases by ~50%. This feature can be explained by the existence of both localized and delocalized excitons in a disordered potential and suggests the existence of an exciton mobility edge in transition metal dichalcogenides.

  18. Trion formation dynamics in monolayer transition metal dichalcogenides

    DOE PAGES

    Singh, Akashay; Moody, Galan; Schaibley, John R.; ...

    2016-01-05

    Here, we report charged exciton (trion) formation dynamics in doped monolayer transition metal dichalcogenides, specifically molybdenum diselenide (MoSe2), using resonant two-color pump-probe spectroscopy. When resonantly pumping the exciton transition, trions are generated on a picosecond time scale through exciton-electron interaction. As the pump energy is tuned from the high energy to low energy side of the inhomogeneously broadened exciton resonance, the trion formation time increases by ~50%. This feature can be explained by the existence of both localized and delocalized excitons in a disordered potential and suggests the existence of an exciton mobility edge in transition metal dichalcogenides.

  19. Binding of transition metals to S100 proteins

    PubMed Central

    Gilston, Benjamin A.; Skaar, Eric P.; Chazin, Walter J.

    2016-01-01

    The S100 proteins are a unique class of EF-hand Ca2+ binding proteins distributed in a cell-specific, tissue-specific, and cell cycle-specific manner in humans and other vertebrates. These proteins are distinguished by their distinctive homodimeric structure, both intracellular and extracellular functions, and the ability to bind transition metals at the dimer interface. Here we summarize current knowledge of S100 protein binding of Zn2+, Cu2+ and Mn2+ ions, focusing on binding affinities, conformational changes that arise from metal binding, and the roles of transition metal binding in S100 protein function. PMID:27430886

  20. Thermodynamic behavior near a metal-insulator transition

    NASA Technical Reports Server (NTRS)

    Paalanen, M. A.; Graebner, J. E.; Bhatt, R. N.; Sachdev, S.

    1988-01-01

    Measurements of the low-temperature specific heat of phosphorus-doped silicon for densities near the metal-insulator transition show an enhancement over the conduction-band itinerant-electron value. The enhancement increases toward lower temperatures but is less than that found for the spin susceptibility. The data are compared with various theoretical models; the large ratio of the spin susceptibility to specific heat indicates the presence of localized spin excitations in the metallic phase as the metal-insulator transition is approached.

  1. Photoluminescence of monolayer transition metal dichalcogenides integrated with VO2

    NASA Astrophysics Data System (ADS)

    Lin, Yu-Chuan; DeLello, Kursti; Zhang, Hai-Tian; Zhang, Kehao; Lin, Zhong; Terrones, Mauricio; Engel-Herbert, Roman; Robinson, Joshua A.

    2016-12-01

    Integrating a phase transition material with two-dimensional semiconductors can provide a route towards tunable opto-electronic metamaterials. Here, we integrate monolayer transition metal dichalcogenides with vanadium dioxide (VO2) thin films grown via molecular beam epitaxy to form a 2D/3D heterostructure. Vanadium dioxide undergoes an insulator-to-metal transition at 60-70 °C, which changes the band alignment between MoS2 and VO2 from a semiconductor-insulator junction to a semiconductor-metal junction. By switching VO2 between insulating and metallic phases, the modulation of photoluminescence emission in the 2D semiconductors was observed. This study demonstrates the feasibility to combine TMDs and functional oxides to create unconventional hybrid optoelectronic properties derived from 2D semiconductors that are linked to functional properties of oxides through proximity coupling.

  2. CO adsorption on transition metal clusters: Trends from density functional theory

    NASA Astrophysics Data System (ADS)

    Zeinalipour-Yazdi, Constantinos D.; Cooksy, Andrew L.; Efstathiou, Angelos M.

    2008-05-01

    This work reports for the first time the trends for carbon monoxide (CO) chemisorption on transition metal clusters present in supported metal catalysts. In particular, the energetic, structural and infrared adsorption characteristics of linearly (atop) CO adsorbed on transition metal nano-clusters of less than 10 Å in size were explored. Spin-unrestricted density functional theory (DFT) calculations were employed to explore the trends of CO adsorption energy (AM-CO) and C-O vibrational frequency (νCO) for clusters composed of Ni, Cu, Ru, Rh, Pd, Ag, Ir, Pt and Au. The effects of the transition metal electronic structure onto the adsorption energy of CO and the vibrational stretching frequency of C-O, and how these chemical parameters can be correlated to the catalytic activity of transition supported metal catalysts that involve the adsorption, surface diffusion, and C-O bond dissociation elementary steps in heterogeneous catalytic surface reactions, are discussed. Our findings show that an increase of the electronic d-shell occupancy and the principal quantum number (n) in transition metals causes an increase in the vibrational stretching frequency of the C-O bond. This trend is inconsistent with the classical Blyholder model for the metal-carbonyl bond.

  3. [Transition metal mediated transformations of small molecules

    SciTech Connect

    Sen, A.

    1992-01-01

    Work on organotransition metal chemistry, homogeneous and heterogeneous catalysis is summarized. Several cationic palladium(II) complexes with bulky phosphine or pyridine ligands were discovered that are highly selective catalysts for linear dimerization of vinyl monomers and linear polymerization of p-divinylbenzene, the reactions proceeding through a carbocationic mechanism. Our studies were continued on alternating olefin-carbon monoxide copolymers. The copolymerization reaction and reactivity of copolymers were examined. New catalytic systems for alternating copolymerization of [alpha]-olefins with CO were discovered. In the case of styrene derivatives, tactic copolymers were obtained. Poly(ethylenepyrrolediyl) derivatives were synthesized from alternating ethylene-carbon monoxide copolymer and become electronic conductors when doped with iodine. A catalytic system for direct synthesis of polyureas and polyoxamides from and diamines was also discovered. Pt metal catalyzed the oxidation of ethers, esters, and amines to carboxylic acids and the oxidation of olefins to 1,2-diols. Anaerobic and aerobic decomposition of molybdenum(VI)-oxoalkyl compounds were studied for heterogeneous oxidation of alkanes and olefins on Mo(VI)-oxide surfaces. Synthesis of polymer-trapped metal, metal oxide, and metal sulfide nanoclusters (size <1--10 nm) was studied.

  4. Flexible metallic seal for transition duct in turbine system

    DOEpatents

    Flanagan, James Scott; LeBegue, Jeffrey Scott; McMahan, Kevin Weston; Dillard, Daniel Jackson; Pentecost, Ronnie Ray

    2014-04-22

    A turbine system is disclosed. In one embodiment, the turbine system includes a transition duct. The transition duct includes an inlet, an outlet, and a passage extending between the inlet and the outlet and defining a longitudinal axis, a radial axis, and a tangential axis. The outlet of the transition duct is offset from the inlet along the longitudinal axis and the tangential axis. The transition duct further includes an interface member for interfacing with a turbine section. The turbine system further includes a flexible metallic seal contacting the interface member to provide a seal between the interface member and the turbine section.

  5. Adhesion and friction of single-crystal diamond in contact with transition metals

    NASA Technical Reports Server (NTRS)

    Miyoshi, K.; Buckley, D. H.

    1980-01-01

    An investigation was conducted to examine the adhesion and friction of single-crystal diamond in contact with various transition metals and the nature of metal transfer to diamond. Sliding friction experiments were conducted with diamond in sliding contact with the metals yttrium, titanium, zirconium, vanadium, iron, cobalt, nickel, tungsten, platinum, rhenium and rhodium. All experiments were conducted with loads of 0.05 to 0.3 N, at a sliding velocity of 0.003 m per minute, in a vacuum of 10 to the -8th Pa, at room temperature, and on the (111) plane of diamond with sliding in the 110 line type direction. The results of the investigation indicate that the coefficient of friction for diamond in contact with various metals is related to the relative chemical activity of the metals in high vacuum. The more active the metal, the higher the coefficient of friction. All the metals examined transferred to the surface of diamond in sliding.

  6. Catalysts comprising magnesium and a transition metal

    SciTech Connect

    Bujadoux, K.

    1984-10-09

    A catalyst comprising the product obtained by bringing into contact a compound of magnesium comprising at least one species selected from the group consisting of magnesium monohalides (MgX), halo-magnesium hydrides (HMgX) and magnesium hydride (MgH/sub 2/), X being a halogen and the said species MgX or HMgX being obtained by thermal decomposition of a powdery organo-magnesium halide R/sub 1/MgX wherein R/sub 1/ is an organic radical; and at least one halide of a transistion metal selected from the group consisting of titanium and vanadium, the valency of said metal in said halide being lower than or equal to 3, the quantities being such that the atomic ratio of magnesium to said transistion metal is between 1 and 25, and a catalyst system including the catalyst that is suitable for use in the polymerization of olefins and particularly ethylene.

  7. Flexible transition metal dichalcogenide nanosheets for band-selective photodetection

    PubMed Central

    Velusamy, Dhinesh Babu; Kim, Richard Hahnkee; Cha, Soonyoung; Huh, June; Khazaeinezhad, Reza; Kassani, Sahar Hosseinzadeh; Song, Giyoung; Cho, Suk Man; Cho, Sung Hwan; Hwang, Ihn; Lee, Jinseong; Oh, Kyunghwan; Choi, Hyunyoug; Park, Cheolmin

    2015-01-01

    The photocurrent conversions of transition metal dichalcogenide nanosheets are unprecedentedly impressive, making them great candidates for visible range photodetectors. Here we demonstrate a method for fabricating micron-thick, flexible films consisting of a variety of highly separated transition metal dichalcogenide nanosheets for excellent band-selective photodetection. Our method is based on the non-destructive modification of transition metal dichalcogenide sheets with amine-terminated polymers. The universal interaction between amine and transition metal resulted in scalable, stable and high concentration dispersions of a single to a few layers of numerous transition metal dichalcogenides. Our MoSe2 and MoS2 composites are highly photoconductive even at bending radii as low as 200 μm on illumination of near infrared and visible light, respectively. More interestingly, simple solution mixing of MoSe2 and MoS2 gives rise to blended composite films in which the photodetection properties were controllable. The MoS2/MoSe2 (5:5) film showed broad range photodetection suitable for both visible and near infrared spectra. PMID:26333531

  8. Transition metal catalysis in the generation of petroleum and natural gas. Progress report, [1992--1993

    SciTech Connect

    Mango, F.

    1993-08-01

    A new hypothesis is introduced for the generation of petroleum and natural gas. The transition metals, activated under the reducing conditions of diagenesis, are proposed as catalysts in the generation of light hydrocarbons. The objective of this proposal is to test that hypothesis. Transition metals (Ni, V, Ti, Co, Fe), in kerogen, porphyrins, and as pure compounds, will be tested under catagenic conditions for catalytic activity in the conversion of normal paraffins and hydrogen into light hydrocarbons. If the hypothesis is correct, kerogenous transition metals should become catalytically active under the reducing conditions of diagenesis and catalyze the conversion of paraffins into the light hydrocarbons seen in petroleum. Moreover, the C{sub 1}-C{sub 4} hydrocarbons generated catalytically should be similar in molecular and isotopic compositions to natural gas.

  9. New non-toxic transition metal nanocomplexes and Zn complex-silica xerogel nanohybrid: Synthesis, spectral studies, antibacterial, and antitumor activities

    NASA Astrophysics Data System (ADS)

    Shebl, Magdy; Saif, M.; Nabeel, Asmaa I.; Shokry, R.

    2016-08-01

    A new chromone Schiff base and its complexes of Cu(II), Ni(II), Co(II), Fe(III), Zn(II), Cd(II), and UO2(VI) as well as Zn(II) complex-silica xerogel nanohybrid were successfully prepared in a nano domain with crystalline or amorphous structures. Structures of the Schiff base and its complexes were investigated by elemental and thermal analyses, IR, 1H NMR, electronic, ESR, mass spectra, XRD, and TEM, as well as conductivity and magnetic susceptibility measurements. The spectroscopic data revealed that the Schiff base ligand behaves as a monobasic tridentate ligand. The coordination sites with metal ions are γ-pyrone oxygen, azomethine nitrogen, and oxygen of the carboxylic group. The metal complexes exhibited octahedral geometry, except Cu(II) complex, which has a square planar geometry and UO2(VI) complex, in which uranium ion is hepta-coordinated. Transmission electron microscope (TEM) analysis showed that Ni(II) and Zn(II) complexes have aggregated spheres and rod morphologies, respectively. TEM images of Zn(II) complex-silica xerogel nanohybrid showed a nanosheet morphology with 46 nm average size and confirmed that the complex was uniformly distributed into the silica pores. The obtained nanocomplexes were tested as antimicrobial and antitumor agents. The results showed that Zn(II) nanocomplex and Zn(II) complex-silica xerogel nanohybrid have high activity. The toxicity test on mice showed that Zn(II) complex and Zn(II) complex-silica xerogel nanohybrid have lower toxicity than cisplatin.

  10. Electronic Transitions in f-electron Metals at High Pressures:

    SciTech Connect

    Yoo, C; Maddox, B; Lazicki, A; Iota, V; Klepeis, J P; McMahan, A

    2007-02-08

    This study was to investigate unusual phase transitions driven by electron correlation effects that occur in many f-band transition metals and are often accompanied by large volume changes: {approx}20% at the {delta}-{alpha} transition in Pu and 5-15% for analogous transitions in Ce, Pr, and Gd. The exact nature of these transitions has not been well understood, including the short-range correlation effects themselves, their relation to long-range crystalline order, the possible existence of remnants of the transitions in the liquid, the role of magnetic moments and order, the critical behavior, and dynamics of the transitions, among other issues. Many of these questions represent forefront physics challenges central to Stockpile materials and are also important in understanding the high-pressure behavior of other f- and d-band transition metal compounds including 3d-magnetic transition monoxide (TMO, TM=Mn, Fe, Co, Ni). The overarching goal of this study was, therefore, to understand the relationships between crystal structure and electronic structure of transition metals at high pressures, by using the nation's brightest third-generation synchrotron x-ray at the Advanced Photon Source (APS). Significant progresses have been made, including new discoveries of the Mott transition in MnO at 105 GPa and Kondo-like 4f-electron dehybridization and new developments of high-pressure resonance inelastic x-ray spectroscopy and x-ray emission spectroscopy. These scientific discoveries and technology developments provide new insights and enabling tools to understand scientific challenges in stockpile materials. The project has broader impacts in training two SEGRF graduate students and developing an university collaboration (funded through SSAAP).

  11. The metal-insulator transition in magnetite.

    NASA Technical Reports Server (NTRS)

    Cullen, J. R.; Callen, E.

    1972-01-01

    We describe an electronic model for the low temperature transition in magnetite, in which the average number of electrons on a site is non-integral. The solution of the one-dimensional problem is reviewed, and the connection of the model with the Verwey ordering is discussed. Some of the implication of the three dimensional problem are discussed.

  12. Metallization and charge-transfer gap closure of transition-metal iodides under pressure

    SciTech Connect

    Chen, A. Li-Chung

    1993-05-01

    It is shown with resistivity and near-IR absorption measurements that NiI{sub 2}, CoI{sub 2}, and FeI{sub 2} metallize under pressure by closure of the charge-transfer energy gap at pressures of 17, 10, and 23 GPa, respectively, which is close to the antiferromagnetic-diamagnetic transition in NiI{sub 2} and CoI{sub 2}. Thus, the magnetic transitions probably are caused by the metallization; in NiI{sub 2} and CoI{sub 2}, the insulator-metal transitions are first order. Moessbauer and XRD data were also collected. Figs, 46 refs.

  13. Metallic magnetism and change of conductivity in the nano to bulk transition of cobalt ferrite

    NASA Astrophysics Data System (ADS)

    Arunkumar, A.; Vanidha, D.; Oudayakumar, K.; Rajagopan, S.; Kannan, R.

    2013-11-01

    Variations in conductivity with particle size have been observed in cobalt ferrite, when synthesized by solgel auto-combustion method. Impedance analysis reveals metallic and semiconducting behavior at room temperature for a particle size of 6 nm and 52 nm, respectively. Upon thermal activation, metallic to semiconducting phase transition has been observed as a function of particle size and vice-versa. Grainboundary Resistance (Rgb), increased drastically with particle size (19 MΩ for 6 nm and 259 MΩ for 52 nm) at room temperature. AC conductivity and dielectric constants exhibit similar metallic to semiconducting phase transition at 6 nm and semiconducting behavior at 52 nm with temperature in the selected frequencies. Enhanced magnetic moment with an increase in the grain size along with decreased coercivity (1444 G to 1146 G) reveals transition from single domain to multi-domain. Increased inter-particle interaction is responsible for metallicity at the nano level and on the contrary semiconductivity is attributed to bulk.

  14. Strong electron correlations in biomimetic transition metal molecules

    NASA Astrophysics Data System (ADS)

    Labute, Montiago Xavier

    The first-row transition metals (Fe, Co, V,...) are key players in the active sites of proteins and enzymes responsible for diverse biological processes such as NO regulation and photosynthesis. Many small transition metal complexes possess chemical coordination environments in the vicinity of the metal atom that are reminiscent of these active sites. We have studied the electronic structure of these molecules and discussed the relevance for their biological analogues. The specific question on which we wish to focus is: Do strong correlations (resulting from the localized character of the TM 3d-orbitals) contribute significantly to the reaction energetics of these molecules and, if so, can these effects be observed by experiment? To accomplish these ends we focus on the cobalt valence tautomer molecules and the phenomenon of electron transfer in aqueous hexaammine cobalt ions. We utilize theoretical methods in order to study the cobalt valence tautomer molecules which undergo an interconversion with temperature that is reminiscent of the changes in structure and spin that the heme group experiences as the result of Fe-ligand interactions. We perform fully ab initio calculations using the GGA implementation of density functional theory with the computer code SIESTA. In addition, a simple Anderson Impurity Model has been employed that more properly accounts for the Coulomb interaction among the 3d electrons on the cobalt atom. The calculated Co K x-ray absorption near-edge spectra XANES agrees well with experimental data and a prediction for the Co L-edge XAS that could be tested in future experiments is also presented. We believe that there are structures in both spectra that may only be explained by a strong admixture of configurations. It is conjectured that strong electron correlations help explain the non-Arrhenius rate behavior observed in the high-spin to low-spin relaxation rate at low temperatures. Work on electron-transfer in CoNH32 +/3+6aq using these

  15. Biocompatibility of transition metal-substituted cobalt ferrite nanoparticles

    NASA Astrophysics Data System (ADS)

    Sanpo, Noppakun; Tharajak, Jirasak; Li, Yuncang; Berndt, Christopher C.; Wen, Cuie; Wang, James

    2014-07-01

    Transition metals of copper, zinc, manganese, and nickel were substituted into cobalt ferrite nanoparticles via a sol-gel route using citric acid as a chelating agent. The microstructure and elemental compositions of the nanoparticles were characterized using scanning electron microscopy combined with energy dispersive X-ray spectroscopy. The particle size of the nanoparticles was investigated using particle size analyzer, and the zeta potentials were measured using zeta potential analyzer. The phase components of the synthesized transition metal-substituted cobalt ferrite nanoparticles were studied using Raman spectroscopy. The biocompatibility of the nanoparticles was assessed using osteoblast-like cells. Results indicated that the substitution of transition metals strongly influences the physical, chemical properties, and biocompatibility of the cobalt ferrite nanoparticles.

  16. Nanodisperse transition metal electrodes (NTME) for electrochemical cells

    DOEpatents

    Striebel, Kathryn A.; Wen, Shi-Jie

    2000-01-01

    Disclosed are transition metal electrodes for electrochemical cells using gel-state and solid-state polymers. The electrodes are suitable for use in primary and secondary cells. The electrodes (either negative electrode or positive electrode) are characterized by uniform dispersion of the transition metal at the nanoscale in the polymer. The transition metal moiety is structurally amorphous, so no capacity fade should occur due to lattice expansion/contraction mechanisms. The small grain size, amorphous structure and homogeneous distribution provide improved charge/discharge cycling performance, and a higher initial discharge rate capability. The cells can be cycled at high current densities, limited only by the electrolyte conductivity. A method of making the electrodes (positive and negative), and their usage in electrochemical cells are disclosed.

  17. Nanodisperse transition metal electrodes (NTME) for electrochemical cells

    SciTech Connect

    Striebel, Kathryn A.; Wen, Shi-Jie

    1998-12-01

    Disclosed are transition metal electrodes for electrochemical cells using gel-state and solid-state polymers. The electrodes are suitable for use in primary and secondary cells. The electrodes (either negative electrode or positive electrode) are characterized by uniform dispersion of the transition metal at the nanoscale in the polymer. The transition metal moiety is structurally amorphous, so no capacity fade should occur due to lattice expansion/contraction mechanisms. The small grain size, amorphous structure and homogeneous distribution provide improved charge/discharge cycling performance, and a higher initial discharge rate capability. The cells can be cycled at high current densities, limited only by the electrolyte conductivity. A method of making the electrodes (positive and negative), and their usage in electrochemical cells are disclosed.

  18. Transition metal-substituted cobalt ferrite nanoparticles for biomedical applications.

    PubMed

    Sanpo, Noppakun; Berndt, Christopher C; Wen, Cuie; Wang, James

    2013-03-01

    Transition metals of copper, zinc, chromium and nickel were substituted into cobalt ferrite nanoparticles via a sol-gel route using citric acid as a chelating agent. The microstructure and elemental composition were characterized using scanning electron microscopy combined with energy-dispersive X-ray spectroscopy. Phase analysis of transition metal-substituted cobalt ferrite nanoparticles was performed via X-ray diffraction. Surface wettability was measured using the water contact angle technique. The surface roughness of all nanoparticles was measured using profilometry. Moreover, thermogravimetric analysis and differential scanning calorimetry were performed to determine the temperature at which the decomposition and oxidation of the chelating agents took place. Results indicated that the substitution of transition metals influences strongly the microstructure, crystal structure and antibacterial property of the cobalt ferrite nanoparticles.

  19. Strong dependence of fluorescence quenching on the transition metal in layered transition metal dichalcogenide nanoflakes for nucleic acid detection.

    PubMed

    Loo, Adeline Huiling; Bonanni, Alessandra; Pumera, Martin

    2016-08-07

    In recent years, the application of transition metal dichalcogenides for the development of biosensors has been receiving widespread attention from researchers, as demonstrated by the surge in studies present in the field. While different transition metal dichalcogenide materials have been employed for the fabrication of fluorescent biosensors with superior performance, no research has been conducted to draw comparisons across materials containing different transition metals. Herein, the performance of MoS2 and WS2 nanoflakes for the fluorescence detection of nucleic acids is assessed. It is discovered that, at the optimal amount, MoS2 and WS2 nanoflakes exhibit a similar degree of fluorescence quenching, at 75% and 71% respectively. However, MoS2 nanoflakes have better performance in the areas of detection range and selectivity than WS2 nanoflakes. The detection range achieved with MoS2 nanoflakes is 9.60-366 nM while 13.3-143 nM with WS2 nanoflakes. In the context of selectivity, MoS2 nanoflakes display a signal difference of 97.8% between complementary and non-complementary DNA targets, whereas WS2 nanoflakes only exhibit 44.3%. Such research is highly beneficial as it delivers vital insights on how the performance of a fluorescent biosensor can be affected by the transition metal present. Furthermore, these insights can assist in the selection of suitable transition metal dichalcogenide materials for utilization in biosensor development.

  20. Ammonia and hydrazine. Transition-metal-catalyzed hydroamination and metal-free catalyzed functionalization

    SciTech Connect

    Bertrand, Guy

    2012-06-29

    high temperatures and long reaction times. To address this issue, we have developed several new families of carbon- and boron-based ligands, which are even better donors. The corresponding metal complexes (particularly gold, rhodium, iridium, and ruthenium) of all these species will be tested in the Markovnikov and anti-Markovnikov hydroamination of alkynes, allenes, and also alkenes with ammonia and hydrazine. We will also develop metal-free catalytic processes for the functionalization of ammonia and hydrazine. By possessing both a lone pair of electrons and an accessible vacant orbital, singlet carbenes resemble and can mimic the chemical behavior of transition metals. Our preliminary results demonstrate that specially designed carbenes can split the N–H bond of ammonia by an initial nucleophilic activation that prevents the formation of Lewis acid-base adducts, which is the major hurdle for the transition metal catalyzed functionalization of NH3. The use of purely organic compounds as catalysts will eliminate the major drawbacks of transition-metal-catalysis technology, which are the excessive cost of metal complexes (metal + ligands) and in many cases the toxicity of the metal.

  1. Anharmonic Vibrational Spectroscopy on Metal Transition Complexes

    NASA Astrophysics Data System (ADS)

    Latouche, Camille; Bloino, Julien; Barone, Vincenzo

    2014-06-01

    Advances in hardware performance and the availability of efficient and reliable computational models have made possible the application of computational spectroscopy to ever larger molecular systems. The systematic interpretation of experimental data and the full characterization of complex molecules can then be facilitated. Focusing on vibrational spectroscopy, several approaches have been proposed to simulate spectra beyond the double harmonic approximation, so that more details become available. However, a routine use of such tools requires the preliminary definition of a valid protocol with the most appropriate combination of electronic structure and nuclear calculation models. Several benchmark of anharmonic calculations frequency have been realized on organic molecules. Nevertheless, benchmarks of organometallics or inorganic metal complexes at this level are strongly lacking despite the interest of these systems due to their strong emission and vibrational properties. Herein we report the benchmark study realized with anharmonic calculations on simple metal complexes, along with some pilot applications on systems of direct technological or biological interest.

  2. Role of phonons in the metal-insulator phase transition.

    NASA Technical Reports Server (NTRS)

    Langer, W. D.

    1972-01-01

    Review, for the transition series oxides, of the Mattis and Lander model, which is one of electrons interacting with lattice vibrations (electron and phonon interaction). The model displays superconducting, insulating, and metallic phases. Its basic properties evolve from a finite crystallographic distortion associated with a dominant phonon mode and the splitting of the Brillouin zone into two subzones, a property of simple cubic and body centered cubic lattices. The order of the metal-insulator phase transition is examined. The basic model has a second-order phase transition and the effects of additional mechanisms on the model are calculated. The way in which these mechanisms affect the magnetically ordered transition series oxides as described by the Hubbard model is discussed.

  3. Actively convected liquid metal divertor

    NASA Astrophysics Data System (ADS)

    Shimada, Michiya; Hirooka, Yoshi

    2014-12-01

    The use of actively convected liquid metals with j × B force is proposed to facilitate heat handling by the divertor, a challenging issue associated with magnetic fusion experiments such as ITER. This issue will be aggravated even more for DEMO and power reactors because the divertor heat load will be significantly higher and yet the use of copper would not be allowed as the heat sink material. Instead, reduced activation ferritic/martensitic steel alloys with heat conductivities substantially lower than that of copper, will be used as the structural materials. The present proposal is to fill the lower part of the vacuum vessel with liquid metals with relatively low melting points and low chemical activities including Ga and Sn. The divertor modules, equipped with electrodes and cooling tubes, are immersed in the liquid metal. The electrode, placed in the middle of the liquid metal, can be biased positively or negatively with respect to the module. The j × B force due to the current between the electrode and the module provides a rotating motion for the liquid metal around the electrodes. The rise in liquid temperature at the separatrix hit point can be maintained at acceptable levels from the operation point of view. As the rotation speed increases, the current in the liquid metal is expected to decrease due to the v × B electromotive force. This rotating motion in the poloidal plane will reduce the divertor heat load significantly. Another important benefit of the convected liquid metal divertor is the fast recovery from unmitigated disruptions. Also, the liquid metal divertor concept eliminates the erosion problem.

  4. Covalent functionalization of monolayered transition metal dichalcogenides by phase engineering.

    PubMed

    Voiry, Damien; Goswami, Anandarup; Kappera, Rajesh; e Silva, Cecilia de Carvalho Castro; Kaplan, Daniel; Fujita, Takeshi; Chen, Mingwei; Asefa, Tewodros; Chhowalla, Manish

    2015-01-01

    Chemical functionalization of low-dimensional materials such as nanotubes, nanowires and graphene leads to profound changes in their properties and is essential for solubilizing them in common solvents. Covalent attachment of functional groups is generally achieved at defect sites, which facilitate electron transfer. Here, we describe a simple and general method for covalent functionalization of two-dimensional transition metal dichalcogenide nanosheets (MoS₂, WS₂ and MoSe₂), which does not rely on defect engineering. The functionalization reaction is instead facilitated by electron transfer between the electron-rich metallic 1T phase and an organohalide reactant, resulting in functional groups that are covalently attached to the chalcogen atoms of the transition metal dichalcogenide. The attachment of functional groups leads to dramatic changes in the optoelectronic properties of the material. For example, we show that it renders the metallic 1T phase semiconducting, and gives it strong and tunable photoluminescence and gate modulation in field-effect transistors.

  5. Control of magnetism across metal to insulator transitions

    NASA Astrophysics Data System (ADS)

    de la Venta, J.; Wang, Siming; Ramirez, J. G.; Schuller, Ivan K.

    2013-03-01

    Magnetic properties (coercivity and magnetization) of ferromagnetic films are strongly affected by the proximity to materials that undergo a metal to insulator transition. Here, we show that stress associated with structural changes across the metal-insulator phase transition in VO2 and V2O3 produces a magnetoelastic anisotropy in ferromagnetic films (Co and Ni) deposited on top of the oxides. The changes in coercivity are as large as 168% and occur in a very narrow temperature range. This effect can be controlled and inverted by the thickness and the deposition temperature of the ferromagnetic films, which is very flexible for important technological applications.

  6. Metal-Insulator Transitions in Epitaxial LaVO(3) and LaTiO(3) Films

    DTIC Science & Technology

    2012-08-01

    are insulating in the bulk—has led to an explosion of research activity in perovskite transition-metal oxide heterostructures. The most well-known...ADDRESSES U.S. Army Research Office P.O. Box 12211 Research Triangle Park, NC 27709-2211 15. SUBJECT TERMS metal insulator transition, oxide ...effects must be duly taken into consideration when interpreting metallic behavior in these complex oxide heterostructures. This work is supported by the

  7. Metal-insulator transition near a superconducting state

    NASA Astrophysics Data System (ADS)

    Kaveh, M.; Mott, N. F.

    1992-03-01

    We show that when the metal-insulation transition occurs near a superconducting state it results in a different critical behavior from that of amorphous metals or uncompensated doped semiconductors. This difference results from the enhancement of the effective electron-electron interaction caused by fluctuations to the superconducting state. This explains the recent experiments of Micklitz and co-workers on amorphous superconducting mixtures Ga-Ar and Bi-Kr.

  8. Solid state tetrachloroaluminate storage battery having a transition metal chloride cathode

    NASA Astrophysics Data System (ADS)

    Vaughn, R. L.

    1983-12-01

    In accordance with this invention, it has been found that highly efficient, lightweight, thermally activated power sources can be fabricated by utilizing a transition metal chloride such as cupric chloride, ferric chloride, or molybdenum chloride as the cathode; and a lithium metal or lithium-aluminum or lithium-silicon alloy as the anode in combination with an alkali metal tetrachloroaluminate solid electrolyte. The power source may comprise a single cell or a stack of individual cells. A typical cell is a three layered pellet composed of a lithium alloy anode, a separating alkali metal tetrachloroaluminate solid electrolyte sandwiched between the anode and a cathode which, in turn, is composed of a mixture of the transition metal chloride and graphite. The cell is totally inert until raised to its operating temperature by any conventional heating means.

  9. Transition-Metal Doped Ceria Microspheres with Nanoporous Structures for CO Oxidation

    PubMed Central

    Zhou, Lin; Li, Xiaoxiao; Yao, Ze; Chen, Zhuwen; Hong, Mei; Zhu, Rongshu; Liang, Yongye; Zhao, Jing

    2016-01-01

    Catalytic oxidation of carbon monoxide (CO) is of great importance in many different fields of industry. Until now it still remains challenging to use non-noble metal based catalysts to oxidize CO at low temperature. Herein, we report a new class of nanoporous, uniform, and transition metal-doped cerium (IV) oxide (ceria, CeO2) microsphere for CO oxidation catalysis. The porous and uniform microsphere is generated by sacrificed polymer template. Transition-metals, like Cu, Co, Ni, Mn and Fe, were doped into CeO2 microspheres. The combination of hierarchical structure and metal doping afford superior catalytic activities of the doped ceria microspheres, which could pave a new way to advanced non-precious metal based catalysts for CO oxidation. PMID:27030159

  10. Transition-Metal Doped Ceria Microspheres with Nanoporous Structures for CO Oxidation

    NASA Astrophysics Data System (ADS)

    Zhou, Lin; Li, Xiaoxiao; Yao, Ze; Chen, Zhuwen; Hong, Mei; Zhu, Rongshu; Liang, Yongye; Zhao, Jing

    2016-03-01

    Catalytic oxidation of carbon monoxide (CO) is of great importance in many different fields of industry. Until now it still remains challenging to use non-noble metal based catalysts to oxidize CO at low temperature. Herein, we report a new class of nanoporous, uniform, and transition metal-doped cerium (IV) oxide (ceria, CeO2) microsphere for CO oxidation catalysis. The porous and uniform microsphere is generated by sacrificed polymer template. Transition-metals, like Cu, Co, Ni, Mn and Fe, were doped into CeO2 microspheres. The combination of hierarchical structure and metal doping afford superior catalytic activities of the doped ceria microspheres, which could pave a new way to advanced non-precious metal based catalysts for CO oxidation.

  11. Transition Metal Complexes of Expanded Porphyrins

    PubMed Central

    Sessler, Jonathan L.; Tomat, Elisa

    2008-01-01

    Over the last two decades, the rapid development of new synthetic routes for the preparation of expanded porphyrin macrocycles has allowed exploration of a new frontier consisting of “porphyrin-like” coordination chemistry. In this Account, we summarize our exploratory forays into the still relatively poorly explored area of oligopyrrolic macrocycle metalation chemistry. Specifically, we describe our successful formation of both mono- and binuclear complexes and in doing so highlight the diversity of coordination modes available to expanded porphyrin-type ligands. The nature of the inserted cation, the emerging role of tautomeric equilibria, and the importance of hydrogen-bonding interactions in regulating this chemistry are also discussed. PMID:17397134

  12. On the behavior of Bronsted-Evans-Polanyi Relations for Transition Metal Oxides

    SciTech Connect

    Vojvodic, Aleksandra

    2011-08-22

    Versatile Broensted-Evans-Polanyi (BEP) relations are found from density functional theory for a wide range of transition metal oxides including rutiles and perovskites. For oxides, the relation depends on the type of oxide, the active site and the dissociating molecule. The slope of the BEP relation is strongly coupled to the adsorbate geometry in the transition state. If it is final state-like the dissociative chemisorption energy can be considered as a descriptor for the dissociation. If it is initial state-like, on the other hand, the dissociative chemisorption energy is not suitable as descriptor for the dissociation. Dissociation of molecules with strong intramolecular bonds belong to the former and molecules with weak intramolecular bonds to the latter group. We show, for the prototype system La-perovskites, that there is a 'cyclic' behavior in the transition state characteristics upon change of the active transition metal of the oxide.

  13. Bivalent transition metal complexes of o-hydroxyacetophenone [N-(3-hydroxy-2-naphthoyl)] hydrazone: spectroscopic, antibacterial, antifungal activity and thermogravimetric studies.

    PubMed

    Zaky, R R; Ibrahim, K M; Gabr, I M

    2011-10-15

    Schiff base complexes of Cu(II), Ni(II) and Zn(II) with the o-hydroxyacetophenone [N-(3-hydroxy-2-naphthoyl)] hydrazone (H(2)o-HAHNH) containing N and O donor sites have been synthesized. Both ligand and its metal complexes were characterized by different physicochemical methods, elemental analysis, molar conductivity ((1)H NMR, (13)C NMR, IR, UV-visible, ESR, MS spectra) and also thermal analysis (TG and DTG) techniques. The discussion of the outcome data of the prepared complexes indicates that the ligand behave as a bidentate and/or tridentate ligand. The electronic spectra of the complexes as well as their magnetic moments suggest octahedral geometries for all isolated complexes. The room temperature solid state ESR spectrum of the Cu(II) complex shows d(x2-y2) as a ground state, suggesting tetragonally distorted octahedral geometry around Cu(II) centre. The molar conductance measurements proved that the complexes are non-electrolytes. The kinetic thermodynamic parameters such as: E(#), ΔH(#), ΔG(#), ΔS(#) are calculated from the DTG curves, for the [Ni(H(O)-HAHNH)(2)] and [Zn(H(2O)-HAHNH)(OAc)(2)]·H(2)O complexes using the Coats-Redfern equation. Also, the antimicrobial properties of all compounds were studied using a wide spectrum of bacterial and fungal strains. The [Cu(Ho-HAHNH)(OAc)(H(2)O)(2)] complex was the most active against all strains, including Aspergillus sp., Stemphylium sp. and Trichoderma sp. Fungi; E. coli and Clostridium sp. Bacteria.

  14. Bivalent transition metal complexes of o-hydroxyacetophenone [N-(3-hydroxy-2-naphthoyl)] hydrazone: Spectroscopic, antibacterial, antifungal activity and thermogravimetric studies

    NASA Astrophysics Data System (ADS)

    Zaky, R. R.; Ibrahim, K. M.; Gabr, I. M.

    2011-10-01

    Schiff base complexes of Cu(II), Ni(II) and Zn(II) with the o-hydroxyacetophenone [N-(3-hydroxy-2-naphthoyl)] hydrazone (H 2o-HAHNH) containing N and O donor sites have been synthesized. Both ligand and its metal complexes were characterized by different physicochemical methods, elemental analysis, molar conductivity ( 1H NMR, 13C NMR, IR, UV-visible, ESR, MS spectra) and also thermal analysis (TG and DTG) techniques. The discussion of the outcome data of the prepared complexes indicates that the ligand behave as a bidentate and/or tridentate ligand. The electronic spectra of the complexes as well as their magnetic moments suggest octahedral geometries for all isolated complexes. The room temperature solid state ESR spectrum of the Cu(II) complex shows d x2- y2 as a ground state, suggesting tetragonally distorted octahedral geometry around Cu(II) centre. The molar conductance measurements proved that the complexes are non-electrolytes. The kinetic thermodynamic parameters such as: E#, Δ H#, Δ G#, Δ S# are calculated from the DTG curves, for the [Ni(H O-HAHNH) 2] and [Zn(H 2 O-HAHNH)(OAc) 2]·H 2O complexes using the Coats-Redfern equation. Also, the antimicrobial properties of all compounds were studied using a wide spectrum of bacterial and fungal strains. The [Cu(H o-HAHNH)(OAc)(H 2O) 2] complex was the most active against all strains, including Aspergillus sp., Stemphylium sp. and Trichoderma sp. Fungi; E. coli and Clostridium sp. Bacteria.

  15. The recent development of efficient Earth-abundant transition-metal nanocatalysts.

    PubMed

    Wang, Dong; Astruc, Didier

    2017-02-06

    Whereas noble metal compounds have long been central in catalysis, Earth-abundant metal-based catalysts have in the same time remained undeveloped. Yet the efficacy of Earth-abundant metal catalysts was already shown at the very beginning of the 20th century with the Fe-catalyzed Haber-Bosch process of ammonia synthesis and later in the Fischer-Tropsch reaction. Nanoscience has revolutionized the world of catalysis since it was observed that very small Au nanoparticles (NPs) and other noble metal NPs are extraordinarily efficient. Therefore the development of Earth-abundant metals NPs is more recent, but it has appeared necessary due to their "greenness". This review highlights catalysis by NPs of Earth-abundant transition metals that include Mn, Fe, Co, Ni, Cu, early transition metals (Ti, V, Cr, Zr, Nb and W) and their nanocomposites with emphasis on basic principles and literature reported during the last 5 years. A very large spectrum of catalytic reactions has been successfully disclosed, and catalysis has been examined for each metal starting with zero-valent metal NPs followed by oxides and other nanocomposites. The last section highlights the catalytic activities of bi- and trimetallic NPs. Indeed this later family is very promising and simultaneously benefits from increased stability, efficiency and selectivity, compared to monometallic NPs, due to synergistic substrate activation.

  16. Reactivity of cyclopentadienyl transition metal(ii) complexes with borate ligands: structural characterization of the toluene-activated molybdenum complex [Cp*Mo(CO)2(η(3)-CH2C6H5)].

    PubMed

    Ramalakshmi, Rongala; Maheswari, K; Sharmila, Dudekula; Paul, Anamika; Roisnel, Thierry; Halet, Jean-François; Ghosh, Sundargopal

    2016-10-18

    Reactions of cyclopentadienyl transition-metal halide complexes [Cp*Mo(CO)3Cl], 1, and [CpFe(CO)2I], 2, (Cp = C5H5; Cp* = η(5)-C5Me5) with borate ligands are reported. Treatment of 1 with [NaBt2] (Bt2 = dihydrobis(2-mercapto-benzothiazolyl)borate) in toluene yielded [Cp*Mo(CO)2(C7H4S2N)], 3, and [Cp*Mo(CO)2(η(3)-CH2C6H5)], 4, with a selective binding of toluene through C-H activation followed by orthometallation. Note that compound 4 is a structurally characterized toluene-activated molecule in which the metal is in η(3)-coordination mode. Under similar reaction conditions, [NaPy2] (Py2 = dihydrobis(2-mercaptopyridyl)borate) produced only the mercaptopyridyl molybdenum complex [Cp*Mo(CO)2(C5H4SN)], 5, in good yield. On the other hand, when compound 2 was treated individually with [NaBt] (Bt = trihydro(2-mercapto-benzothiazolyl)borate) and [NaPy2] in THF, formation of the η(1)-coordinated complexes [CpFe(CO)2(C7H4S2N)], 6, and [CpFe(CO)2(C5H4SN)], 7, was observed. The solid-state molecular structures of compounds 3, 4, 6, and 7 have been established by single-crystal X-ray crystallographic analyses.

  17. Effect of gold subsurface layer on the surface activity and segregation in Pt/Au/Pt{sub 3}M (where M = 3d transition metals) alloy catalyst from first-principles

    SciTech Connect

    Kim, Chang-Eun; Lim, Dong-Hee; Jang, Jong Hyun; Kim, Hyoung Juhn; Yoon, Sung Pil; Han, Jonghee; Nam, Suk Woo; Hong, Seong-Ahn; Soon, Aloysius E-mail: hchahm@kist.re.kr; Ham, Hyung Chul E-mail: hchahm@kist.re.kr

    2015-01-21

    The effect of a subsurface hetero layer (thin gold) on the activity and stability of Pt skin surface in Pt{sub 3}M system (M = 3d transition metals) is investigated using the spin-polarized density functional theory calculation. First, we find that the heterometallic interaction between the Pt skin surface and the gold subsurface in Pt/Au/Pt{sub 3}M system can significantly modify the electronic structure of the Pt skin surface. In particular, the local density of states projected onto the d states of Pt skin surface near the Fermi level is drastically decreased compared to the Pt/Pt/Pt{sub 3}M case, leading to the reduction of the oxygen binding strength of the Pt skin surface. This modification is related to the increase of surface charge polarization of outmost Pt skin atoms by the electron transfer from the gold subsurface atoms. Furthermore, a subsurface gold layer is found to cast the energetic barrier to the segregation loss of metal atoms from the bulk (inside) region, which can enhance the durability of Pt{sub 3}M based catalytic system in oxygen reduction condition at fuel cell devices. This study highlights that a gold subsurface hetero layer can provide an additional mean to tune the surface activity toward oxygen species and in turn the oxygen reduction reaction, where the utilization of geometric strain already reaches its practical limit.

  18. On the character of the optical transitions in closed-shell transition metal oxides doped with Bi(3).

    PubMed

    Amer, M; Boutinaud, P

    2017-01-18

    A criterion is introduced to achieve the assignment of the optical features observed in the excitation spectra of Bi(3+) ions incorporated in closed-shell transition metal oxides. The model is based on the calculation of the energy associated with the lowest (1)S0 → (3)P1 intra-ionic transition of Bi(3+) (A-like transition), the metal-to-metal charge transfer (D-like transition) and the Stokes shift of the corresponding emission.

  19. The Electronic Structure of Transition Metal Coated Fullerenes

    NASA Astrophysics Data System (ADS)

    Patton, David C.; Pederson, Mark R.; Kaxiras, Efthimios

    1998-03-01

    Clusters composed of fullerene molecules with an outer shell of transition metal atoms in the composition C_60M_62 (M being a transition metal) have been produced with laser vaporisation techniques(F. Tast, N. Malinowski, S. Frank, M. Heinebrodt, I.M.L. Billas, and T. P. Martin, Z. Phys D 40), 351 (1997).. We have studied several of these very large systems with a parallel version of the all-electron NRLMOL cluster code. Optimized geometries of the metal encased fullerenes C_60Ti_62 and C_60V_62 are presented along with their HOMO-LUMO gaps, electron affinities, ionization energies, and cohesive energies. We compare the stability of these clusters to relaxed met-car structures (e.g. Ti_8C_12) and to relaxed rocksalt metal-carbide fragments (TiC)n with n=8 and 32. In addition to metal-coated fullerenes we consider the possibility of a trilayered structure consisting of a small shell of metal atoms enclosed by a metal coated fullerene. The nature of bonding in these systems is analyzed by studying the electronic charge distributions.

  20. Transition metal (Mn, Fe, Co, Ni)-doped graphene hybrids for electrocatalysis.

    PubMed

    Toh, Rou Jun; Poh, Hwee Ling; Sofer, Zdeněk; Pumera, Martin

    2013-06-01

    The development of electrocatalysts is crucial for renewable energy applications. Metal-doped graphene hybrid materials have been explored for this purpose, however, with much focus on noble metals, which are limited by their low availability and high costs. Transition metals may serve as promising alternatives. Here, transition metal-doped graphene hybrids were synthesized by a simple and scalable method. Metal-doped graphite oxide precursors were thermally exfoliated in either hydrogen or nitrogen atmosphere; by changing exfoliation atmospheres from inert to reductive, we produced materials with different degrees of oxidation. Effects of the presence of metal nanoparticles and exfoliation atmosphere on the morphology and electrocatalytic activity of the hybrid materials were investigated using electron microscopy, energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, and cyclic voltammetry. Doping of graphene with transition metal nanoparticles of the 4th period significantly influenced the electrocatalysis of compounds important in energy production and storage applications, with hybrid materials exfoliated in nitrogen atmosphere displaying superior performance over those exfoliated in hydrogen atmosphere. Moreover, nickel-doped graphene hybrids displayed outstanding electrocatalytic activities towards reduction of O2 when compared to bare graphenes. These findings may be exploited in the research field of renewable energy.

  1. Dynamical conductivity at the dirty superconductor-metal quantum phase transition.

    PubMed

    Del Maestro, Adrian; Rosenow, Bernd; Hoyos, José A; Vojta, Thomas

    2010-10-01

    We study the transport properties of ultrathin disordered nanowires in the neighborhood of the superconductor-metal quantum phase transition. To this end we combine numerical calculations with analytical strong-disorder renormalization group results. The quantum critical conductivity at zero temperature diverges logarithmically as a function of frequency. In the metallic phase, it obeys activated scaling associated with an infinite-randomness quantum critical point. We extend the scaling theory to higher dimensions and discuss implications for experiments.

  2. Observation of the Wigner-Huntington transition to metallic hydrogen.

    PubMed

    Dias, Ranga P; Silvera, Isaac F

    2017-02-17

    Producing metallic hydrogen has been a great challenge in condensed matter physics. Metallic hydrogen may be a room-temperature superconductor and metastable when the pressure is released and could have an important impact on energy and rocketry. We have studied solid molecular hydrogen under pressure at low temperatures. At a pressure of 495 gigapascals, hydrogen becomes metallic, with reflectivity as high as 0.91. We fit the reflectance using a Drude free-electron model to determine the plasma frequency of 32.5 ± 2.1 electron volts at a temperature of 5.5 kelvin, with a corresponding electron carrier density of 7.7 ± 1.1 × 10(23) particles per cubic centimeter, which is consistent with theoretical estimates of the atomic density. The properties are those of an atomic metal. We have produced the Wigner-Huntington dissociative transition to atomic metallic hydrogen in the laboratory.

  3. Observation of the Wigner-Huntington transition to metallic hydrogen

    NASA Astrophysics Data System (ADS)

    Dias, Ranga P.; Silvera, Isaac F.

    2017-02-01

    Producing metallic hydrogen has been a great challenge in condensed matter physics. Metallic hydrogen may be a room-temperature superconductor and metastable when the pressure is released and could have an important impact on energy and rocketry. We have studied solid molecular hydrogen under pressure at low temperatures. At a pressure of 495 gigapascals, hydrogen becomes metallic, with reflectivity as high as 0.91. We fit the reflectance using a Drude free-electron model to determine the plasma frequency of 32.5 ± 2.1 electron volts at a temperature of 5.5 kelvin, with a corresponding electron carrier density of 7.7 ± 1.1 × 1023 particles per cubic centimeter, which is consistent with theoretical estimates of the atomic density. The properties are those of an atomic metal. We have produced the Wigner-Huntington dissociative transition to atomic metallic hydrogen in the laboratory.

  4. Studying Activity Series of Metals.

    ERIC Educational Resources Information Center

    Hoon, Tien-Ghun; And Others

    1995-01-01

    Presents teaching strategies that illustrate the linking together of numerous chemical concepts involving the activity of metals (quantitative analysis, corrosion, and electrolysis) through the use of deep-level processing strategies. Concludes that making explicit links in the process of teaching chemistry can lead effectively to meaningful…

  5. Transition-metal-free trifluoromethylthiolation of N-heteroarenes.

    PubMed

    Honeker, Roman; Ernst, Johannes B; Glorius, Frank

    2015-05-26

    A general and efficient methodology for the direct transition metal free trifluoromethylthiolation of a broad range of biologically relevant N-heteroarenes is reported employing abundant sodium chloride as the catalyst. This method is operationally simple, exhibits high functional group tolerance, and does not require protecting groups.

  6. Luminescent molecular rods - transition-metal alkynyl complexes.

    PubMed

    Yam, Vivian Wing-Wah; Wong, Keith Man-Chung

    2005-01-01

    A number of transition-metal complexes have been reported to exhibit rich luminescence, usually originating from phosphorescence. Such luminescence properties of the triplet excited state with a large Stoke's shift, long lifetime, high luminescence quantum yield as well as lower excitation energy, are envisaged to serve as an ideal candidate in the area of potential applications for chemosensors, dye-sensitized solar cells, flat panel displays, optics, new materials and biological sciences. Organic alkynes (poly-ynes), with extended or conjugatedπ-systems and rigid structure with linear geometry, have become a significant research area due to their novel electronic and physical properties and their potential applications in nanotechnology. Owing to the presence of unsaturated sp-hybridized carbon atoms, the alkynyl unit can serve as a versatile building block in the construction of alkynyl transition-metal complexes, not only throughσ-bonding but also viaπ-bonding interactions. By incorporation of linear alkynyl groups into luminescent transition-metal complexes, the alkynyl moiety with goodσ-donor,π-donor andπ-acceptor abilities is envisaged to tune or perturb the emission behaviors, including emission energy (color), intensity and lifetime by its role as an auxiliary ligand as well as to govern the emission origin from its direct involvement. This review summarizes recent efforts on the synthesis of luminescent rod-like alkynyl complexes with different classes of transition metals and details the effects of the introduction of alkynyl groups on the luminescence properties of the complexes.

  7. Mechanisms of transition-metal gettering in silicon

    SciTech Connect

    Myers, S. M.; Seibt, M.; Schroeter, W.

    2000-10-01

    The atomic process, kinetics, and equilibrium thermodynamics underlying the gettering of transition-metal impurities in Si are reviewed. Methods for mathematical modeling of gettering are discussed and illustrated. Needs for further research are considered. (c) 2000 American Institute of Physics.

  8. Biomass transition metal hydrogen-evolution electrocatalysts and electrodes

    DOEpatents

    Chen, Wei-Fu; Iyer, Shweta; Iyer, Shilpa; Sasaki, Kotaro; Muckerman, James T.; Fujita, Etsuko

    2017-02-28

    A catalytic composition from earth-abundant transition metal salts and biomass is disclosed. A calcined catalytic composition formed from soybean powder and ammonium molybdate is specifically exemplified herein. Methods for making the catalytic composition are disclosed as are electrodes for hydrogen evolution reactions comprising the catalytic composition.

  9. The Electrochemical Synthesis of Transition-Metal Acetylacetonates

    ERIC Educational Resources Information Center

    Long, S. R.; Browning, S. R.; Lagowski, J. J.

    2008-01-01

    The electrochemical synthesis of transition-metal acetylacetonates described here can form the basis of assisting in the transformation of an entry-level laboratory course into a research-like environment where all members of a class are working on the same problem, but where each member has a personal responsibility for the synthesis and…

  10. Microwave assisted synthesis of technologically important transition metal silicides

    SciTech Connect

    Vaidhyanathan, B.; Rao, K.J.

    1997-12-01

    A novel, simple, clean and fast microwave assisted method of preparing important transition metal silicides (MoSi{sub 2}, WSi{sub 2}, CoSi{sub 2}, and TiSi{sub 2}) has been described. Amorphous carbon is used both as a microwave susceptor and as a preventer of oxidation. {copyright} {ital 1997 Materials Research Society.}

  11. Well-defined transition metal hydrides in catalytic isomerizations.

    PubMed

    Larionov, Evgeny; Li, Houhua; Mazet, Clément

    2014-09-07

    This Feature Article intends to provide an overview of a variety of catalytic isomerization reactions that have been performed using well-defined transition metal hydride precatalysts. A particular emphasis is placed on the underlying mechanistic features of the transformations discussed. These have been categorized depending upon the nature of the substrate and in most cases discussed following a chronological order.

  12. Finding new ternary transition metal selenides and sulphides

    NASA Astrophysics Data System (ADS)

    Narayan, Awadhesh; Bhutani, Ankita; Eckstein, James N.; Shoemaker, Daniel P.; Wagner, Lucas K.

    The transition metal oxides exhibit many interesting physical properties, and have been explored in detail over time. Recently, the transition metal chalchogenides including selenium and sulfur have been of interest because of their correlated electron properties, as seen in the iron based superconductors and the layered transition metal dichalchogenides. However, the chalchogenides are much less explored than the oxides, and there is an open question of whether there may be new materials heretofore undiscovered. We perform a systematic combined theoretical and experimental search over ternary phase diagrams that are empty in the Inorganic Crystal Structure Database containing cations, transition metals, and one of selenium or sulfur. In these 27 ternary systems, we use a probabilistic model to reduce the likelihood of false negative predictions, which results in a list of 24 candidate materials. We then conduct a variety of synthesis experiments to check the candidate materials for stability. While the prediction method did obtain compositions that are stable, none of the candidate materials formed in our experiments. We come to the conclusion that these phase diagrams are either truly empty or have unusual structures or synthesis requirements. This work was supported by the Center for Emergent Superconductivity, Department of Energy Frontier Research Center under Grant No. DEAC0298CH1088.

  13. Preparation of nanoporous metal foam from high nitrogen transition metal complexes

    DOEpatents

    Tappan, Bryce C.; Huynh, My Hang V.; Hiskey, Michael A.; Son, Steven F.; Oschwald, David M.; Chavez, David E.; Naud, Darren L.

    2006-11-28

    Nanoporous metal foams are prepared by ignition of high nitrogen transition metal complexes. The ammonium salts of iron(III) tris[bi(tetrazolato)-amine], cobalt(III) tris(bi(tetrazolato)amine), and high nitrogen compounds of copper and silver were prepared as loose powders, pressed into pellets and wafers, and ignited under an inert atmosphere to form nanoporous metal foam monoliths having very high surface area and very low density.

  14. A one-pot synthetic strategy for construction of the dibenzodiazepine skeleton via a transition metal-free process.

    PubMed

    Fang, Shuai; Niu, Xiaoyi; Zhang, Zeyuan; Sun, Yan; Si, Xiaomeng; Shan, Cuicui; Wei, Lei; Xu, Aiqing; Feng, Lei; Ma, Chen

    2014-09-21

    A one-pot transition metal-free methodology for constructing pharmacologically active dibenzodiazepine derivatives was developed. Fluoro-, bromo- and nitro-substituted aryl aldehydes were applied to this reaction efficiently.

  15. On the thermodynamics of phase transitions in metal hydrides

    NASA Astrophysics Data System (ADS)

    Vita, Andrea

    2012-02-01

    Metal hydrides are solutions of hydrogen in a metal, where phase transitions may occur depending on temperature, pressure etc. We apply Le Chatelier's principle of thermodynamics to a particular phase transition in TiHx, which can approximately be described as a second-order phase transition. We show that the fluctuations of the order parameter correspond to fluctuations both of the density of H+ ions and of the distance between adjacent H+ ions. Moreover, as the system approaches the transition and the correlation radius increases, we show -with the help of statistical mechanics-that the statistical weight of modes involving a large number of H+ ions (`collective modes') increases sharply, in spite of the fact that the Boltzmann factor of each collective mode is exponentially small. As a result, the interaction of the H+ ions with collective modes makes a tiny suprathermal fraction of the H+ population appear. Our results hold for similar transitions in metal deuterides, too. A violation of an -insofar undisputed-upper bound on hydrogen loading follows.

  16. On the thermodynamics of phase transitions in metal hydrides

    NASA Astrophysics Data System (ADS)

    di Vita, Andrea

    2012-02-01

    Metal hydrides are solutions of hydrogen in a metal, where phase transitions may occur depending on temperature, pressure etc. We apply Le Chatelier's principle of thermodynamics to a particular phase transition in TiH x , which can approximately be described as a second-order phase transition. We show that the fluctuations of the order parameter correspond to fluctuations both of the density of H+ ions and of the distance between adjacent H+ ions. Moreover, as the system approaches the transition and the correlation radius increases, we show -with the help of statistical mechanics-that the statistical weight of modes involving a large number of H+ ions (`collective modes') increases sharply, in spite of the fact that the Boltzmann factor of each collective mode is exponentially small. As a result, the interaction of the H+ ions with collective modes makes a tiny suprathermal fraction of the H+ population appear. Our results hold for similar transitions in metal deuterides, too. A violation of an -insofar undisputed-upper bound on hydrogen loading follows.

  17. Covalent bonds against magnetism in transition metal compounds.

    PubMed

    Streltsov, Sergey V; Khomskii, Daniel I

    2016-09-20

    Magnetism in transition metal compounds is usually considered starting from a description of isolated ions, as exact as possible, and treating their (exchange) interaction at a later stage. We show that this standard approach may break down in many cases, especially in 4d and 5d compounds. We argue that there is an important intersite effect-an orbital-selective formation of covalent metal-metal bonds that leads to an "exclusion" of corresponding electrons from the magnetic subsystem, and thus strongly affects magnetic properties of the system. This effect is especially prominent for noninteger electron number, when it results in suppression of the famous double exchange, the main mechanism of ferromagnetism in transition metal compounds. We study this mechanism analytically and numerically and show that it explains magnetic properties of not only several 4d-5d materials, including Nb2O2F3 and Ba5AlIr2O11, but can also be operative in 3d transition metal oxides, e.g., in CrO2 under pressure. We also discuss the role of spin-orbit coupling on the competition between covalency and magnetism. Our results demonstrate that strong intersite coupling may invalidate the standard single-site starting point for considering magnetism, and can lead to a qualitatively new behavior.

  18. Transition metal catalysis in the generation of petroleum and natural gas

    SciTech Connect

    Mango, F.D. )

    1992-01-01

    Certain ratios of light hydrocarbons remain virtually invariant over the course of petroleum generation, indicating steady-state catalysis rather than thermal cracking as the central feature to the mechanism of petroleum generation. Although the evidence for catalytic intervention is now compelling, the nature of the catalytic agent, its mode of activation and action are not clear. The author proposes that the transition metals, activated in the lipophilic domains of kerogen, are the catalytic agents in the conversion of normal paraffins into light hydrocarbons and natural gas. The process proceeds through specific catalytic steps involving 3-, 5-, and 6-carbon ring-closures and the cleavage of carbon-carbon bonds in the key steps. This hypothesis is analyzed in the context of published literature on catalysis by Ni, V, Ti, Co, and related transition metals. Activated under anaerobic conditions, these metals express extraordinary catalytic activity in each of the postulated steps. Moreover, metal-catalysis provides a reasonable kinetic pathway through which hydrogen and normal paraffins may combine to form a methane-enriched a natural gas. Given the anaerobic conditions of diagenesis and a kerogenous source of hydrogen, it is concluded that the transition metals, under catagenic conditions, are potentially active catalysts in the conversion of hydrogen and paraffins into light hydrocarbons and natural gas.

  19. Mixed ligand complexation of some transition metal ions in solution and solid state: Spectral characterization, antimicrobial, antioxidant, DNA cleavage activities and molecular modeling

    NASA Astrophysics Data System (ADS)

    Shobana, Sutha; Dharmaraja, Jeyaprakash; Selvaraj, Shanmugaperumal

    2013-04-01

    Equilibrium studies of Ni(II), Cu(II) and Zn(II) mixed ligand complexes involving a primary ligand 5-fluorouracil (5-FU; A) and imidazoles viz., imidazole (him), benzimidazole (bim), histamine (hist) and L-histidine (his) as co-ligands(B) were carried out pH-metrically in aqueous medium at 310 ± 0.1 K with I = 0.15 M (NaClO4). In solution state, the stoichiometry of MABH, MAB and MAB2 species have been detected. The primary ligand(A) binds the central M(II) ions in a monodentate manner whereas him, bim, hist and his co-ligands(B) bind in mono, mono, bi and tridentate modes respectively. The calculated Δ log K, log X and log X' values indicate higher stability of the mixed ligand complexes in comparison to binary species. Stability of the mixed ligand complex equilibria follows the Irving-Williams order of stability. In vitro biological evaluations of the free ligand(A) and their metal complexes by well diffusion technique show moderate activities against common bacterial and fungal strains. Oxidative cleavage interaction of ligand(A) and their copper complexes with CT DNA is also studied by gel electrophoresis method in the presence of oxidant. In vitro antioxidant evaluations of the primary ligand(A), CuA and CuAB complexes by DPPH free radical scavenging model were carried out. In solid, the MAB type of M(II)sbnd 5-FU(A)sbnd his(B) complexes were isolated and characterized by various physico-chemical and spectral techniques. Both the magnetic susceptibility and electronic spectral analysis suggest distorted octahedral geometry. Thermal studies on the synthesized mixed ligand complexes show loss of coordinated water molecule in the first step followed by decomposition of the organic residues subsequently. XRD and SEM analysis suggest that the microcrystalline nature and homogeneous morphology of MAB complexes. Further, the 3D molecular modeling and analysis for the mixed ligand MAB complexes have also been carried out.

  20. Metal-insulator transition in films of doped semiconductor nanocrystals.

    PubMed

    Chen, Ting; Reich, K V; Kramer, Nicolaas J; Fu, Han; Kortshagen, Uwe R; Shklovskii, B I

    2016-03-01

    To fully deploy the potential of semiconductor nanocrystal films as low-cost electronic materials, a better understanding of the amount of dopants required to make their conductivity metallic is needed. In bulk semiconductors, the critical concentration of electrons at the metal-insulator transition is described by the Mott criterion. Here, we theoretically derive the critical concentration nc for films of heavily doped nanocrystals devoid of ligands at their surface and in direct contact with each other. In the accompanying experiments, we investigate the conduction mechanism in films of phosphorus-doped, ligand-free silicon nanocrystals. At the largest electron concentration achieved in our samples, which is half the predicted nc, we find that the localization length of hopping electrons is close to three times the nanocrystals diameter, indicating that the film approaches the metal-insulator transition.

  1. Disorder-Driven Metal-Insulator Transitions in Deformable Lattices

    NASA Astrophysics Data System (ADS)

    Di Sante, Domenico; Fratini, Simone; Dobrosavljević, Vladimir; Ciuchi, Sergio

    2017-01-01

    We show that, in the presence of a deformable lattice potential, the nature of the disorder-driven metal-insulator transition is fundamentally changed with respect to the noninteracting (Anderson) scenario. For strong disorder, even a modest electron-phonon interaction is found to dramatically renormalize the random potential, opening a mobility gap at the Fermi energy. This process, which reflects disorder-enhanced polaron formation, is here given a microscopic basis by treating the lattice deformations and Anderson localization effects on the same footing. We identify an intermediate "bad insulator" transport regime which displays resistivity values exceeding the Mott-Ioffe-Regel limit and with a negative temperature coefficient, as often observed in strongly disordered metals. Our calculations reveal that this behavior originates from significant temperature-induced rearrangements of electronic states due to enhanced interaction effects close to the disorder-driven metal-insulator transition.

  2. Main Group Lewis Acid-Mediated Transformations of Transition-Metal Hydride Complexes.

    PubMed

    Maity, Ayan; Teets, Thomas S

    2016-08-10

    This Review highlights stoichiometric reactions and elementary steps of catalytic reactions involving cooperative participation of transition-metal hydrides and main group Lewis acids. Included are reactions where the transition-metal hydride acts as a reactant as well as transformations that form the metal hydride as a product. This Review is divided by reaction type, illustrating the diverse roles that Lewis acids can play in mediating transformations involving transition-metal hydrides as either reactants or products. We begin with a discussion of reactions where metal hydrides form direct adducts with Lewis acids, elaborating the structure and dynamics of the products of these reactions. The bulk of this Review focuses on reactions where the transition metal and Lewis acid act in cooperation, and includes sections on carbonyl reduction, H2 activation, and hydride elimination reactions, all of which can be promoted by Lewis acids. Also included is a section on Lewis acid-base secondary coordination sphere interactions, which can influence the reactivity of hydrides. Work from the past 50 years is included, but the majority of this Review focuses on research from the past decade, with the intent of showcasing the rapid emergence of this field and the potential for further development into the future.

  3. Using x-ray diffraction to identify precipitates in transition metal doped semiconductors

    NASA Astrophysics Data System (ADS)

    Zhou, Shengqiang; Potzger, K.; Talut, G.; von Borany, J.; Skorupa, W.; Helm, M.; Fassbender, J.

    2008-04-01

    In the past decade, room temperature ferromagnetism was often observed in transition metal doped semiconductors, which were claimed as diluted magnetic semiconductors (DMS). Nowadays intensive activities are devoted to clarify wether the observed ferromagnetism stems from carrier mediated magnetic impurities, ferromagnetic precipitates, or spinodal decomposition. In this paper, we have correlated the structural and magnetic properties of transition metal doped ZnO, TiO2, and Si, prepared by ion implantation. Crystalline precipitates, i.e., transition metal (Co, Ni) and Mn-silicide nanocrystals, are responsible for the magnetism. Additionally due to their orientation nature with respect to the host, these nanocrystals in some cases are not detectable by conventional x-ray diffraction (XRD). This nature results in the pitfall of using XRD to exclude magnetic precipitates in DMS materials.

  4. Thermal battery. [solid metal halide electrolytes with enhanced electrical conductance after a phase transition

    DOEpatents

    Carlsten, R.W.; Nissen, D.A.

    1973-03-06

    The patent describes an improved thermal battery whose novel design eliminates various disadvantages of previous such devices. Its major features include a halide cathode, a solid metal halide electrolyte which has a substantially greater electrical conductance after a phase transition at some temperature, and a means for heating its electrochemical cells to activation temperature.

  5. The transition to the metallic state in low density hydrogen

    SciTech Connect

    McMinis, Jeremy; Morales, Miguel A.; Ceperley, David M.; Kim, Jeongnim

    2015-11-21

    Solid atomic hydrogen is one of the simplest systems to undergo a metal-insulator transition. Near the transition, the electronic degrees of freedom become strongly correlated and their description provides a difficult challenge for theoretical methods. As a result, the order and density of the phase transition are still subject to debate. In this work, we use diffusion quantum Monte Carlo to benchmark the transition between paramagnetic and anti-ferromagnetic body centered cubic atomic hydrogen in its ground state. We locate the density of the transition by computing the equation of state for these two phases and identify the phase transition order by computing the band gap near the phase transition. These benchmark results show that the phase transition is continuous and occurs at a Wigner-Seitz radius of r{sub s} = 2.27(3) a{sub 0}. We compare our results to previously reported density functional theory, Hedin’s GW approximation, and dynamical mean field theory results.

  6. The transition to the metallic state in low density hydrogen

    SciTech Connect

    McMinis, Jeremy; Morales, Miguel A.; Ceperley, David M.; Kim, Jeongnim

    2015-11-18

    Solid atomic hydrogen is one of the simplest systems to undergo a metal-insulator transition. Near the transition, the electronic degrees of freedom become strongly correlated and their description provides a difficult challenge for theoretical methods. As a result, the order and density of the phase transition are still subject to debate. In this work we use diffusion quantum Monte Carlo to benchmark the transition between the paramagnetic and anti-ferromagnetic phases of ground state body centered cubic atomic hydrogen. We locate the density of the transition by computing the equation of state for these two phases and identify the phase transition order by computing the band gap near the phase transition. These benchmark results show that the phase transition is continuous and occurs at a Wigner-Seitz radius of rs = 2.27(3)a0. As a result, we compare our results to previously reported density functional theory, Hedin s GW approximation, and dynamical mean field theory results.

  7. Homogeneous Catalysis by Transition Metal Compounds.

    ERIC Educational Resources Information Center

    Mawby, Roger

    1988-01-01

    Examines four processes involving homogeneous catalysis which highlight the contrast between the simplicity of the overall reaction and the complexity of the catalytic cycle. Describes how catalysts provide circuitous routes in which all energy barriers are relatively low rather than lowering the activation energy for a single step reaction.…

  8. Thermal conductivity switch: Optimal semiconductor/metal melting transition

    NASA Astrophysics Data System (ADS)

    Kim, Kwangnam; Kaviany, Massoud

    2016-10-01

    Scrutinizing distinct solid/liquid (s /l ) and solid/solid (s /s ) phase transitions (passive transitions) for large change in bulk (and homogenous) thermal conductivity, we find the s /l semiconductor/metal (S/M) transition produces the largest dimensionless thermal conductivity switch (TCS) figure of merit ZTCS (change in thermal conductivity divided by smaller conductivity). At melting temperature, the solid phonon and liquid molecular thermal conductivities are comparable and generally small, so the TCS requires localized electron solid and delocalized electron liquid states. For cyclic phase reversibility, the congruent phase transition (no change in composition) is as important as the thermal transport. We identify X Sb and X As (X =Al , Cd, Ga, In, Zn) and describe atomic-structural metrics for large ZTCS, then show the superiority of S/M phonon- to electron-dominated transport melting transition. We use existing experimental results and theoretical and ab initio calculations of the related properties for both phases (including the Kubo-Greenwood and Bridgman formulations of liquid conductivities). The 5 p orbital of Sb contributes to the semiconductor behavior in the solid-phase band gap and upon disorder and bond-length changes in the liquid phase this changes to metallic, creating the large contrast in thermal conductivity. The charge density distribution, electronic localization function, and electron density of states are used to mark this S/M transition. For optimal TCS, we examine the elemental selection from the transition, basic, and semimetals and semiconductor groups. For CdSb, addition of residual Ag suppresses the bipolar conductivity and its ZTCS is over 7, and for Zn3Sb2 it is expected to be over 14, based on the structure and transport properties of the better-known β -Zn4Sb3 . This is the highest ZTCS identified. In addition to the metallic melting, the high ZTCS is due to the electron-poor nature of II-V semiconductors, leading to the

  9. Transition Metal d-Orbital Splitting Diagrams: An Updated Educational Resource for Square Planar Transition Metal Complexes

    ERIC Educational Resources Information Center

    Bo¨rgel, Jonas; Campbell, Michael G.; Ritter, Tobias

    2016-01-01

    The presentation of d-orbital splitting diagrams for square planar transition metal complexes in textbooks and educational materials is often inconsistent and therefore confusing for students. Here we provide a concise summary of the key features of orbital splitting diagrams for square planar complexes, which we propose may be used as an updated…

  10. Electrocatalytic reduction of carbon dioxide on post-transition metal and metal oxide nanoparticles

    NASA Astrophysics Data System (ADS)

    White, James L.

    The electroreduction of carbon dioxide to liquid products is an important component in the utilization of CO2 and in the high-density storage of intermittent renewable energy in the form of chemical bonds. Materials based on indium and tin, which yield predominantly formic acid, have been investigated in order to gain a greater understanding of the electrochemically active species and the mechanism of CO2 reduction on these heavy post-transition metals, since prior studies on the bulk metals did not provide thermodynamically sensible reaction pathways. Nanoparticles of the oxides and hydroxides of tin and indium have been prepared and characterized by transmission electron microscopy, X-ray diffractometry, X-ray photoelectron spectroscopy, and various electrochemical methods in order to obtain structural information and analyze the role of various surface species on the CO2 reduction pathway. On both indium and tin, metastable surface-bound hydroxides bound CO2 and formed metal carbonates, which can then be reduced electrochemically. The relevant oxidation state of tin was suggested to be SnII rather than SnIV, necessitating a pre reduction to generate the CO2-binding species. Metallic indium nanoparticles partially oxidized in air and became highly efficient CO2 reduction electrocatalysts. Unit Faradaic efficiencies for formate, much higher than on bulk indium, were achieved with only 300 mV of overpotential on these particles, which possessed an oxyhydroxide shell surrounding a conductive metallic core. Alloys and mixed-metal oxide and hydroxide particles of tin and indium have also been studied for their carbon dioxide electrocatalytic capabilities, especially in comparison to the pure metal species. Additionally, a solar-driven indium-based CO2 electrolyzer was developed to investigate the overall efficiency for intermittent energy storage. The three flow cells were powered by a commercial photovoltaic array and had a maximum conversion efficiency of incident

  11. Irving Langmuir Prize Lecture - A predictive theory of transition metal surface catalysis

    NASA Astrophysics Data System (ADS)

    Norskov, Jens

    2015-03-01

    The lecture will outline a theory of heterogeneous catalysis that allows a detailed understanding of elementary chemical processes at transition metal surfaces and singles out the most important parameters determining catalytic activity and selectivity. It will be shown how scaling relations allow the identification of descriptors of catalytic activity and how they can be used to construct activity and selectivity maps. The maps can be used to define catalyst design rules and examples of their use will be given.

  12. The N-heterocyclic carbene chemistry of transition-metal carbonyl clusters.

    PubMed

    Cabeza, Javier A; García-Álvarez, Pablo

    2011-11-01

    In the last decade, chemists have dedicated many efforts to investigate the coordination chemistry of N-heterocyclic carbenes (NHCs). Although most of that research activity has been devoted to mononuclear complexes, transition-metal carbonyl clusters have not escaped from these investigations. This critical review, which is focussed on the reactivity of NHCs (or their precursors) with transition-metal carbonyl clusters (mostly are of ruthenium and osmium) and on the transformations underwent by the NHC-containing species initially formed in those reactions, shows that the polynuclear character of these metallic compounds or, more precisely, the close proximity of one or more metal atoms to that which is or can be attached to the NHC ligand, is responsible for reactivity patterns that have no parallel in the NHC chemistry of mononuclear complexes (74 references).

  13. Adhesion and friction of transition metals in contact with nonmetallic hard materials

    NASA Technical Reports Server (NTRS)

    Miyoshi, K.; Buckley, D. H.

    1981-01-01

    Sliding friction experiments were conducted with the metals yttrium, titanium, tantalum, zirconium, vanadium, neodymium, iron, cobalt, nickel, tungsten, platinum, rhenium, ruthenium, and rhodium in sliding contact with single crystal diamond, silicon carbide, pyrolytic boron nitride, and ferrite. Auger electron spectroscopy analysis was conducted with the metals and nonmetals to determine the surface chemistry and the degree of surface cleanliness. The results of the investigation indicate the adhesion and friction of the transition metals in contact with diamond, silicon carbide, boron nitride, and ferrite are related to the relative chemical activity of the metals. The more chemically active the metal, the higher the coefficient of friction and the greater amount of transfer to the nonmetals.

  14. Role of transition metal exporters in virulence: the example of Neisseria meningitidis.

    PubMed

    Guilhen, Cyril; Taha, Muhamed-Kheir; Veyrier, Frédéric J

    2013-01-01

    Transition metals such as iron, manganese, and zinc are essential micronutrients for bacteria. However, at high concentration, they can generate non-functional proteins or toxic compounds. Metal metabolism is therefore regulated to prevent shortage or overload, both of which can impair cell survival. In addition, equilibrium among these metals has to be tightly controlled to avoid molecular replacement in the active site of enzymes. Bacteria must actively maintain intracellular metal concentrations to meet physiological needs within the context of the local environment. When intracellular buffering capacity is reached, they rely primarily on membrane-localized exporters to maintain metal homeostasis. Recently, several groups have characterized new export systems and emphasized their importance in the virulence of several pathogens. This article discusses the role of export systems as general virulence determinants. Furthermore, it highlights the contribution of these exporters in pathogens emergence with emphasis on the human nasopharyngeal colonizer Neisseria meningitidis.

  15. Pseudopotentials for quantum Monte Carlo studies of transition metal oxides

    SciTech Connect

    Krogel, Jaron T.; Santana Palacio, Juan A.; Reboredo, Fernando A.

    2016-02-22

    Quantum Monte Carlo (QMC) calculations of transition metal oxides are partially limited by the availability of high-quality pseudopotentials that are both accurate in QMC and compatible with major plane-wave electronic structure codes. We have generated a set of neon-core pseudopotentials with small cutoff radii for the early transition metal elements Sc to Zn within the local density approximation of density functional theory. The pseudopotentials have been directly tested for accuracy within QMC by calculating the first through fourth ionization potentials of the isolated transition metal (M) atoms and the binding curve of each M-O dimer. We find the ionization potentials to be accurate to 0.16(1) eV, on average, relative to experiment. The equilibrium bond lengths of the dimers are within 0.5(1)% of experimental values, on average, and the binding energies are also typically accurate to 0.18(3) eV. The level of accuracy we find for atoms and dimers is comparable to what has recently been observed for bulk metals and oxides using the same pseudopotentials. Our QMC pseudopotential results compare well with the findings of previous QMC studies and benchmark quantum chemical calculations.

  16. Covalent bonds against magnetism in transition metal compounds

    PubMed Central

    Streltsov, Sergey V.; Khomskii, Daniel I.

    2016-01-01

    Magnetism in transition metal compounds is usually considered starting from a description of isolated ions, as exact as possible, and treating their (exchange) interaction at a later stage. We show that this standard approach may break down in many cases, especially in 4d and 5d compounds. We argue that there is an important intersite effect—an orbital-selective formation of covalent metal–metal bonds that leads to an “exclusion” of corresponding electrons from the magnetic subsystem, and thus strongly affects magnetic properties of the system. This effect is especially prominent for noninteger electron number, when it results in suppression of the famous double exchange, the main mechanism of ferromagnetism in transition metal compounds. We study this mechanism analytically and numerically and show that it explains magnetic properties of not only several 4d–5d materials, including Nb2O2F3 and Ba5AlIr2O11, but can also be operative in 3d transition metal oxides, e.g., in CrO2 under pressure. We also discuss the role of spin–orbit coupling on the competition between covalency and magnetism. Our results demonstrate that strong intersite coupling may invalidate the standard single-site starting point for considering magnetism, and can lead to a qualitatively new behavior. PMID:27601669

  17. Pseudopotentials for quantum Monte Carlo studies of transition metal oxides

    DOE PAGES

    Krogel, Jaron T.; Santana Palacio, Juan A.; Reboredo, Fernando A.

    2016-02-22

    Quantum Monte Carlo (QMC) calculations of transition metal oxides are partially limited by the availability of high-quality pseudopotentials that are both accurate in QMC and compatible with major plane-wave electronic structure codes. We have generated a set of neon-core pseudopotentials with small cutoff radii for the early transition metal elements Sc to Zn within the local density approximation of density functional theory. The pseudopotentials have been directly tested for accuracy within QMC by calculating the first through fourth ionization potentials of the isolated transition metal (M) atoms and the binding curve of each M-O dimer. We find the ionization potentialsmore » to be accurate to 0.16(1) eV, on average, relative to experiment. The equilibrium bond lengths of the dimers are within 0.5(1)% of experimental values, on average, and the binding energies are also typically accurate to 0.18(3) eV. The level of accuracy we find for atoms and dimers is comparable to what has recently been observed for bulk metals and oxides using the same pseudopotentials. Our QMC pseudopotential results compare well with the findings of previous QMC studies and benchmark quantum chemical calculations.« less

  18. Vibrational energy transfer dynamics in ruthenium polypyridine transition metal complexes.

    PubMed

    Fedoseeva, Marina; Delor, Milan; Parker, Simon C; Sazanovich, Igor V; Towrie, Michael; Parker, Anthony W; Weinstein, Julia A

    2015-01-21

    Understanding the dynamics of the initial stages of vibrational energy transfer in transition metal complexes is a challenging fundamental question which is also of crucial importance for many applications, such as improving the performance of solar devices or photocatalysis. The present study investigates vibrational energy transport in the ground and the electronic excited state of Ru(4,4'-(COOEt)2-2,2-bpy)2(NCS)2, a close relative of the efficient "N3" dye used in dye-sensitized solar cells. Using the emerging technique of ultrafast two-dimensional infrared spectroscopy, we show that, similarly to other transition-metal complexes, the central Ru heavy atom acts as a "bottleneck" making the energy transfer from small ligands with high energy vibrational stretching frequencies less favorable and thereby affecting the efficiency of vibrational energy flow in the complex. Comparison of the vibrational relaxation times in the electronic ground and excited state of Ru(4,4'-(COOEt)2-2,2-bpy)2(NCS)2 shows that it is dramatically faster in the latter. We propose to explain this observation by the intramolecular electrostatic interactions between the thiocyanate group and partially oxidised Ru metal center, which increase the degree of vibrational coupling between CN and Ru-N modes in the excited state thus reducing structural and thermodynamic barriers that slow down vibrational relaxation and energy transport in the electronic ground state. As a very similar behavior was earlier observed in another transition-metal complex, Re(4,4'-(COOEt)2-2,2'-bpy)(CO)3Cl, we suggest that this effect in vibrational energy dynamics might be common for transition-metal complexes with heavy central atoms.

  19. The transition to the metallic state in low density hydrogen

    DOE PAGES

    McMinis, Jeremy; Morales, Miguel A.; Ceperley, David M.; ...

    2015-11-18

    Solid atomic hydrogen is one of the simplest systems to undergo a metal-insulator transition. Near the transition, the electronic degrees of freedom become strongly correlated and their description provides a difficult challenge for theoretical methods. As a result, the order and density of the phase transition are still subject to debate. In this work we use diffusion quantum Monte Carlo to benchmark the transition between the paramagnetic and anti-ferromagnetic phases of ground state body centered cubic atomic hydrogen. We locate the density of the transition by computing the equation of state for these two phases and identify the phase transitionmore » order by computing the band gap near the phase transition. These benchmark results show that the phase transition is continuous and occurs at a Wigner-Seitz radius of rs = 2.27(3)a0. As a result, we compare our results to previously reported density functional theory, Hedin s GW approximation, and dynamical mean field theory results.« less

  20. Cross-linking proteins with bimetallic tetracarboxylate compounds of transition metals

    DOEpatents

    Kostic, Nenad M.; Chen, Jian

    1991-03-05

    Stable cross-linked complexes of transition-metal tetracarboxylates and proteins are formed. The preferred transition-metal is rhodium. The protein may be collagen or an enzyme such as a proteolytic enzyme.

  1. Cross-linking proteins with bimetallic tetracarboxylate compounds of transition metals

    DOEpatents

    Kostic, N.M.; Chen, J.

    1991-03-05

    Stable cross-linked complexes of transition-metal tetracarboxylates and proteins are formed. The preferred transition-metal is rhodium. The protein may be collagen or an enzyme such as a proteolytic enzyme. No Drawings

  2. An Alternative Approach to the Teaching of Systematic Transition Metal Chemistry.

    ERIC Educational Resources Information Center

    Hathaway, Brian

    1979-01-01

    Presents an alternative approach to teaching Systematic Transition Metal Chemistry with the transition metal chemistry skeleton features of interest. The "skeleton" is intended as a guide to predicting the chemistry of a selected compound. (Author/SA)

  3. Self-Limiting Layer Synthesis of Transition Metal Dichalcogenides

    NASA Astrophysics Data System (ADS)

    Kim, Youngjun; Song, Jeong-Gyu; Park, Yong Ju; Ryu, Gyeong Hee; Lee, Su Jeong; Kim, Jin Sung; Jeon, Pyo Jin; Lee, Chang Wan; Woo, Whang Je; Choi, Taejin; Jung, Hanearl; Lee, Han-Bo-Ram; Myoung, Jae-Min; Im, Seongil; Lee, Zonghoon; Ahn, Jong-Hyun; Park, Jusang; Kim, Hyungjun

    2016-01-01

    This work reports the self-limiting synthesis of an atomically thin, two dimensional transition metal dichalcogenides (2D TMDCs) in the form of MoS2. The layer controllability and large area uniformity essential for electronic and optical device applications is achieved through atomic layer deposition in what is named self-limiting layer synthesis (SLS); a process in which the number of layers is determined by temperature rather than process cycles due to the chemically inactive nature of 2D MoS2. Through spectroscopic and microscopic investigation it is demonstrated that SLS is capable of producing MoS2 with a wafer-scale (~10 cm) layer-number uniformity of more than 90%, which when used as the active layer in a top-gated field-effect transistor, produces an on/off ratio as high as 108. This process is also shown to be applicable to WSe2, with a PN diode fabricated from a MoS2/WSe2 heterostructure exhibiting gate-tunable rectifying characteristics.

  4. Dislocations and Plasticity in bcc Transition Metals at High Pressure

    SciTech Connect

    Yang, L H; Tang, M; Moriarty, J A

    2009-01-23

    Using first-principles electronic structure calculations, quantum-based atomistic simulations and atomistically informed dislocation dynamics (DD) simulations, we have studied individual dislocation behavior and the multiscale modeling of single-crystal plasticity in the prototype bcc transition metals Ta, Mo and V under both ambient and high pressure conditions. The primary focus in this work is on the pressure-dependent structure, mobility and interaction of a/2<111> screw dislocations, which dominate the plastic deformation properties of these materials. At the electronic scale, first-principles calculations of elasticity, ideal strength and generalized stacking fault energy surfaces have been used to validate quantum-based multi-ion interatomic potentials. At the atomistic scale, these potentials have been used in flexible Green's function boundary condition simulations to study the core structure, Peierls stress {tau}{sub P}, thermally activated kink-pair formation and mobility below {tau}{sub P}, and phonon-drag mobility above {tau}{sub P}. These results have then been distilled into analytic velocity laws and used directly in predictive microscale DD simulations of flow stress and resolved yield stress over wide ranges of pressure, temperature and strain rate.

  5. Self-Limiting Layer Synthesis of Transition Metal Dichalcogenides

    PubMed Central

    Kim, Youngjun; Song, Jeong-Gyu; Park, Yong Ju; Ryu, Gyeong Hee; Lee, Su Jeong; Kim, Jin Sung; Jeon, Pyo Jin; Lee, Chang Wan; Woo, Whang Je; Choi, Taejin; Jung, Hanearl; Lee, Han-Bo-Ram; Myoung, Jae-Min; Im, Seongil; Lee, Zonghoon; Ahn, Jong-Hyun; Park, Jusang; Kim, Hyungjun

    2016-01-01

    This work reports the self-limiting synthesis of an atomically thin, two dimensional transition metal dichalcogenides (2D TMDCs) in the form of MoS2. The layer controllability and large area uniformity essential for electronic and optical device applications is achieved through atomic layer deposition in what is named self-limiting layer synthesis (SLS); a process in which the number of layers is determined by temperature rather than process cycles due to the chemically inactive nature of 2D MoS2. Through spectroscopic and microscopic investigation it is demonstrated that SLS is capable of producing MoS2 with a wafer-scale (~10 cm) layer-number uniformity of more than 90%, which when used as the active layer in a top-gated field-effect transistor, produces an on/off ratio as high as 108. This process is also shown to be applicable to WSe2, with a PN diode fabricated from a MoS2/WSe2 heterostructure exhibiting gate-tunable rectifying characteristics. PMID:26725854

  6. A superconductor to superfluid phase transition in liquid metallic hydrogen.

    PubMed

    Babaev, Egor; Sudbø, Asle; Ashcroft, N W

    2004-10-07

    Although hydrogen is the simplest of atoms, it does not form the simplest of solids or liquids. Quantum effects in these phases are considerable (a consequence of the light proton mass) and they have a demonstrable and often puzzling influence on many physical properties, including spatial order. To date, the structure of dense hydrogen remains experimentally elusive. Recent studies of the melting curve of hydrogen indicate that at high (but experimentally accessible) pressures, compressed hydrogen will adopt a liquid state, even at low temperatures. In reaching this phase, hydrogen is also projected to pass through an insulator-to-metal transition. This raises the possibility of new state of matter: a near ground-state liquid metal, and its ordered states in the quantum domain. Ordered quantum fluids are traditionally categorized as superconductors or superfluids; these respective systems feature dissipationless electrical currents or mass flow. Here we report a topological analysis of the projected phase of liquid metallic hydrogen, finding that it may represent a new type of ordered quantum fluid. Specifically, we show that liquid metallic hydrogen cannot be categorized exclusively as a superconductor or superfluid. We predict that, in the presence of a magnetic field, liquid metallic hydrogen will exhibit several phase transitions to ordered states, ranging from superconductors to superfluids.

  7. Impurity diffusion in transition-metal oxides

    SciTech Connect

    Peterson, N.L.

    1982-06-01

    Intrinsic tracer impurity diffusion measurements in ceramic oxides have been primarily confined to CoO, NiO, and Fe/sub 3/O/sub 4/. Tracer impurity diffusion in these materials and TiO/sub 2/, together with measurements of the effect of impurities on tracer diffusion (Co in NiO and Cr in CoO), are reviewed and discussed in terms of impurity-defect interactions and mechanisms of diffusion. Divalent impurities in divalent solvents seem to have a weak interaction with vacancies whereas trivalent impurities in divalent solvents strongly influence the vacancy concentrations and significantly reduce solvent jump frequencies near a trivalent impurity. Impurities with small ionic radii diffuse more slowly with a larger activation energy than impurities with larger ionic radii for all systems considered in this review. Cobalt ions (a moderate size impurity) diffuse rapidly along the open channels parallel to the c-axis in TiO/sub 2/ whereas chromium ions (a smaller-sized impurity) do not. 60 references, 11 figures.

  8. Polytypic phase transitions in metal intercalated Bi2Se3

    NASA Astrophysics Data System (ADS)

    Wang, Mengjing; Koski, Kristie J.

    2016-12-01

    The temperature and concentration dependent phase diagrams of zero-valent copper, cobalt, and iron intercalated bismuth selenide are investigated using in situ transmission electron microscopy. Polytypic phase transitions associated with superlattice formation along with order-disorder transitions of the guest intercalant are determined. Dual-element intercalants of CuCo, CuFe, and CoFe-Bi2Se3 are also investigated. Hexagonal and striped domain formation consistent with two-dimensional ordering of the intercalant and Pokrovksy-Talapov theory is identified as a function of concentration. These studies provide a complete picture of the structural behavior of zero-valent metal intercalated Bi2Se3.

  9. Influence of the Transition-Metal Fragment on the Reactivity of Metallaanthracenes.

    PubMed

    García-Rodeja, Yago; Fernandez, Israel

    2017-03-24

    The influence of the nature of the transition-metal fragment on the Diels-Alder reactivity of metallaanthracenes has been explored computationally within the Density Functional Theory framework. It is found that the cycloaddition reactions with maleic anhydride become kinetically less favored for those processes involving metallaanthracenes as compared to the analogous reaction involving the parent anthracene. The origins of this reduction in the Diels-Alder reactivity have been quantitatively analyzed in detail using the activation strain model of reactivity in combination with the energy decomposition analysis method. In general, the transition-metal fragment makes the interaction energy between the reactants significantly lower, particularly at the transition state region, which is translated into a higher activation barrier. In addition, the influence of the aromaticity strength of the metallabenzene present in the considered metallaanthracenes on the barriers of the cycloaddition reactions has been also assessed.

  10. Positronium formation in solid transition metal losartanates complexes

    NASA Astrophysics Data System (ADS)

    de Oliveira, F. C.; Denadai, A. M. L.; Fulgêncio, F.; da Silva, J. G.; Windmöller, D.; Marques-Netto, A.; Machado, J. C.; Magalhães, W. F.

    2013-10-01

    In this Letter, positron annihilation lifetime (PALS) measurements were performed in transition metal losartanates complexes, MT(Los)2, and in potassium losartanate, KLos, in order to built up insights about the positronium formation mechanism in molecular environment. A correlation was obtained between formation probability, I3, and the covalence of complexes, evaluated by molar electrical conductivity in dimethylformamide (DMF). Furthermore, some metallic ion properties, such as reduction potential and pauling electronegativity, were also correlated with I3. These results were analyzed in terms of the spur model and of the recently proposed mechanism, named cybotatic correlated system kinetic mechanism (CCSKM), which involves molecular excited states in positronium formation.

  11. Transition metal doped arsenene: A first-principles study

    NASA Astrophysics Data System (ADS)

    Sun, Minglei; Wang, Sake; Du, Yanhui; Yu, Jin; Tang, Wencheng

    2016-12-01

    Using first-principles calculations, we investigate the structural, electronic, and magnetic properties of 3d transition metal (TM) atoms substitutional doping of an arsenene monolayer. Based on the binding energy, the TM-substituted arsenene systems were found to be robust. Magnetic states were obtained for Ti, V, Cr, Mn and Fe doping. More importantly, a half-metallic state resulted from Ti and Mn doping, while the spin-polarized semiconducting state occurred with V, Cr and Fe doping. Our studies demonstrated the potential applications of TM-substituted arsenene for spintronics and magnetic storage devices.

  12. Highly Efficient Transition Metal Nanoparticle Catalysts in Aqueous Solutions.

    PubMed

    Wang, Changlong; Ciganda, Roberto; Salmon, Lionel; Gregurec, Danijela; Irigoyen, Joseba; Moya, Sergio; Ruiz, Jaime; Astruc, Didier

    2016-02-24

    A ligand design is proposed for transition metal nanoparticle (TMNP) catalysts in aqueous solution. Thus, a tris(triazolyl)-polyethylene glycol (tris-trz-PEG) amphiphilic ligand, 2, is used for the synthesis of very small TMNPs with Fe, Co, Ni, Cu, Ru, Pd, Ag, Pt, and Au. These TMNP-2 catalysts were evaluated and compared for the model 4-nitrophenol reduction, and proved to be extremely efficient. High catalytic efficiencies involving the use of only a few ppm metal of PdNPs, RuNPs, and CuNPs were also exemplified in Suzuki-Miyaura, transfer hydrogenation, and click reactions, respectively.

  13. Interaction-Driven Metal-Insulator Transition in Strained Graphene.

    PubMed

    Tang, Ho-Kin; Laksono, E; Rodrigues, J N B; Sengupta, P; Assaad, F F; Adam, S

    2015-10-30

    The question of whether electron-electron interactions can drive a metal to insulator transition in graphene under realistic experimental conditions is addressed. Using three representative methods to calculate the effective long-range Coulomb interaction between π electrons in graphene and solving for the ground state using quantum Monte Carlo methods, we argue that, without strain, graphene remains metallic and changing the substrate from SiO_{2} to suspended samples hardly makes any difference. In contrast, applying a rather large-but experimentally realistic-uniform and isotropic strain of about 15% seems to be a promising route to making graphene an antiferromagnetic Mott insulator.

  14. Nanostructure sensitization of transition metal oxides for visible-light photocatalysis

    PubMed Central

    Chen, Hongjun

    2014-01-01

    Summary To better utilize the sunlight for efficient solar energy conversion, the research on visible-light active photocatalysts has recently attracted a lot of interest. The photosensitization of transition metal oxides is a promising approach for achieving effective visible-light photocatalysis. This review article primarily discusses the recent progress in the realm of a variety of nanostructured photosensitizers such as quantum dots, plasmonic metal nanostructures, and carbon nanostructures for coupling with wide-bandgap transition metal oxides to design better visible-light active photocatalysts. The underlying mechanisms of the composite photocatalysts, e.g., the light-induced charge separation and the subsequent visible-light photocatalytic reaction processes in environmental remediation and solar fuel generation fields, are also introduced. A brief outlook on the nanostructure photosensitization is also given. PMID:24991507

  15. STELLAR TRANSITS IN ACTIVE GALACTIC NUCLEI

    SciTech Connect

    Beky, Bence; Kocsis, Bence E-mail: bkocsis@cfa.harvard.edu

    2013-01-01

    Supermassive black holes (SMBHs) are typically surrounded by a dense stellar population in galactic nuclei. Stars crossing the line of site in active galactic nuclei (AGNs) produce a characteristic transit light curve, just like extrasolar planets do when they transit their host star. We examine the possibility of finding such AGN transits in deep optical, UV, and X-ray surveys. We calculate transit light curves using the Novikov-Thorne thin accretion disk model, including general relativistic effects. Based on the expected properties of stellar cusps, we find that around 10{sup 6} solar mass SMBHs, transits of red giants are most common for stars on close orbits with transit durations of a few weeks and orbital periods of a few years. We find that detecting AGN transits requires repeated observations of thousands of low-mass AGNs to 1% photometric accuracy in optical, or {approx}10% in UV bands or soft X-ray. It may be possible to identify stellar transits in the Pan-STARRS and LSST optical and the eROSITA X-ray surveys. Such observations could be used to constrain black hole mass, spin, inclination, and accretion rate. Transit rates and durations could give valuable information on the circumnuclear stellar clusters as well. Transit light curves could be used to image accretion disks with unprecedented resolution, allowing us to resolve the SMBH silhouette in distant AGNs.

  16. Solventless oxidative coupling of amines to imines by using transition-metal-free metal-organic frameworks.

    PubMed

    Qiu, Xuan; Len, Christophe; Luque, Rafael; Li, Yingwei

    2014-06-01

    A highly efficient, simple, and versatile transition-metal-free metal-organic framework catalytic system is proposed for the oxidative coupling of amines to imines. The catalytic protocol features high activities and selectivities to target products; compatibility with a variety of substrates, including aliphatic amines and secondary amines; and the possibility to efficiently and selectively promote amine cross-coupling reactions. A high stability and recyclability of the catalyst is also observed under the investigated conditions. Insights into the reaction mechanism indicate the formation of a superoxide species able to efficiently promote oxidative couplings.

  17. Resonant Ultrasound Studies of Complex Transition Metal Oxides

    SciTech Connect

    Dr. Henry Bass; Dr. J. R. Gladden

    2008-08-18

    Department of Energy EPSCoR The University of Mississippi Award: DE-FG02-04ER46121 Resonant Ultrasound Spectroscopy Studies of Complex Transition Metal Oxides The central thrust of this DOE funded research program has been to apply resonant ultrasound spectroscopy (RUS), an elegant and efficient method for determining the elastic stiffness constants of a crystal, to the complex and poorly understood class of materials known as transition metal oxides (TMOs). Perhaps the most interesting and challenging feature of TMOs is their strongly correlated behavior in which spin, lattice, and charge degrees of freedom are strongly coupled. Elastic constants are a measure of the interatomic potentials in a crystal and are thus sensitive probes into the atomic environment. This sensitivity makes RUS an ideal tool to study the coupling of phase transition order parameters to lattice strains. The most significant result of the project has been the construction of a high temperature RUS apparatus capable of making elastic constant measurements at temperatures as high as 1000 degrees Celsius. We have designed and built novel acoustic transducers which can operate as high as 600 degrees Celsius based on lithium niobate piezoelectric elements. For measurement between 600 to 1000 C, a buffer rod system is used in which the samples under test and transducers are separated by a rod with low acoustic attenuation. The high temperature RUS system has been used to study the charge order (CO) transition in transition metal oxides for which we have discovered a new transition occurring about 35 C below the CO transition. While the CO transition exhibits a linear coupling between the strain and order parameter, this new precursor transition shows a different coupling indicating a fundamentally different mechanism. We have also begun a study, in collaboration with the Jet Propulsion Laboratory, to study novel thermoelectric materials at elevated temperatures. These materials include silicon

  18. Development of new transition metal oxide catalysts for the destruction of PCDD/Fs.

    PubMed

    Yu, Ming-Feng; Li, Wen-Wei; Li, Xiao-Dong; Lin, Xiao-Qing; Chen, Tong; Yan, Jian-Hua

    2016-08-01

    Various transition metal oxide and vanadium-containing multi-metallic oxide catalysts were developed for the destruction of PCDD/Fs (polychlorinated dibenzo-p-dioxins and furans). A stable PCDD/Fs generating system was installed to support the catalytic destruction tests in this study. Nano-titania supported vanadium catalyst (VOx/TiO2) showed the highest activity, followed by CeOx, MnOx, WOx and finally MoOx. Multi-metallic oxide catalysts, prepared by doping WOx, MoOx, MnOx and CeOx into VOx/TiO2 catalysts, showed different activities on the decomposition of PCDD/Fs. The highest destruction efficiency of 92.5% was observed from the destruction test over VOxCeOx/TiO2 catalyst. However, the addition of WOx and MoOx even played a negative role in multi-metallic VOx/TiO2 catalysts. Characterizations of transition metal oxides and multi-metallic VOx/TiO2 catalysts were also investigated with XRD and TPR. After the catalysts were used, the conversion from high valent metals to low valence states was observed by XPS.

  19. Spin Transport in Single Layer Transition Metal Dichalcogenides

    NASA Astrophysics Data System (ADS)

    Phillips, Michael; Aji, Vivek

    Inversion symmetry breaking and strong spin orbit coupling in two dimensional transition metal dichalcogenides leads to interesting new phenomena such as the valley hall and spin hall effects. The nontrivial Berry curvature of the bands yields transverse spin currents in applied field. In this talk we characterize the spin transport in hole-doped systems. Due to the large spin-splitting, time-reversal invariance, and the large separation of hole pockets in momentum space, spin flip scattering involves inter-valley processes with large momentum. As such, one expects large spin life times and a large spin hall angle. We analyze the robustness of the phenomena to various scattering processes and explore the viability of transition metal dichalcogenides for spintronic applications. We acknowledge the support of the NSF via Grant NSF DMR-1506707.

  20. [Spectroscopic studies on transition metal ions in colored diamonds].

    PubMed

    Meng, Yu-Fei; Peng, Ming-Sheng

    2004-07-01

    Transition metals like nickel, cobalt and iron have been often used as solvent catalysts in high pressure high temperature (HPHT) synthesis of diamond, and nickel and cobalt ions have been found in diamond lattice. Available studies indicated that nickel and cobalt ions could enter the lattice as interstitial or substitutional impurities and form complexes with nitrogen. Polarized microscopy, SEM-EDS, EPR, PL and FTIR have been used in this study to investigate six fancy color natural and synthetic diamonds in order to determine the spectroscopic characteristics and the existing forms of transition metal ions in colored diamond lattice. Cobalt-related optical centers were first found in natural chameleon diamonds, and some new nickel and cobalt-related optical and EPR centers have also been detected in these diamond samples.

  1. Metal-Insulator Transition and Topological Properties of Pyrochlore Iridates

    NASA Astrophysics Data System (ADS)

    Zhang, Hongbin; Haule, Kristjan; Vanderbilt, David

    2017-01-01

    Combining density functional theory (DFT) and embedded dynamical mean-field theory (DMFT) methods, we study the metal-insulator transition in R2Ir2 O7 (R =Y , Eu, Sm, Nd, Pr, and Bi) and the topological nature of the insulating compounds. Accurate free energies evaluated using the charge self-consistent DFT +DMFT method reveal that the metal-insulator transition occurs for an A -cation radius between that of Nd and Pr, in agreement with experiments. The all-in-all-out magnetic phase, which is stable in the Nd compound but not the Pr one, gives rise to a small Ir4 + magnetic moment of ≈0.4 μB and opens a sizable correlated gap. We demonstrate that within this state-of-the-art theoretical method, the insulating bulk pyrochlore iridates are topologically trivial.

  2. Engineering skyrmions in transition-metal multilayers for spintronics

    NASA Astrophysics Data System (ADS)

    Dupé, B.; Bihlmayer, G.; Böttcher, M.; Blügel, S.; Heinze, S.

    2016-06-01

    Magnetic skyrmions are localized, topologically protected spin structures that have been proposed for storing or processing information due to their intriguing dynamical and transport properties. Important in terms of applications is the recent discovery of interface stabilized skyrmions as evidenced in ultra-thin transition-metal films. However, so far only skyrmions at interfaces with a single atomic layer of a magnetic material were reported, which greatly limits their potential for application in devices. Here we predict the emergence of skyrmions in [4d/Fe2/5d]n multilayers, that is, structures composed of Fe biatomic layers sandwiched between 4d and 5d transition-metal layers. In these composite structures, the exchange and the Dzyaloshinskii-Moriya interactions that control skyrmion formation can be tuned separately by the two interfaces. This allows engineering skyrmions as shown based on density functional theory and spin dynamics simulations.

  3. Engineering skyrmions in transition-metal multilayers for spintronics.

    PubMed

    Dupé, B; Bihlmayer, G; Böttcher, M; Blügel, S; Heinze, S

    2016-06-03

    Magnetic skyrmions are localized, topologically protected spin structures that have been proposed for storing or processing information due to their intriguing dynamical and transport properties. Important in terms of applications is the recent discovery of interface stabilized skyrmions as evidenced in ultra-thin transition-metal films. However, so far only skyrmions at interfaces with a single atomic layer of a magnetic material were reported, which greatly limits their potential for application in devices. Here we predict the emergence of skyrmions in [4d/Fe2/5d]n multilayers, that is, structures composed of Fe biatomic layers sandwiched between 4d and 5d transition-metal layers. In these composite structures, the exchange and the Dzyaloshinskii-Moriya interactions that control skyrmion formation can be tuned separately by the two interfaces. This allows engineering skyrmions as shown based on density functional theory and spin dynamics simulations.

  4. Recent Advances in Transition Metal-Catalyzed Glycosylation.

    PubMed

    McKay, Matthew J; Nguyen, Hien M

    2012-08-03

    Having access to mild and operationally simple techniques for attaining carbohydrate targets will be necessary to facilitate advancement in biological, medicinal, and pharmacological research. Even with the abundance of elegant reports for generating glycosidic linkages, stereoselective construction of α- and β-oligosaccharides and glycoconjugates is by no means trivial. In an era where expanded awareness of the impact we are having on the environment drives the state-of-the-art, synthetic chemists are tasked with developing cleaner and more efficient reactions for achieving their transformations. This movement imparts the value that prevention of waste is always superior to its treatment or cleanup. This review will highlight recent advancement in this regard by examining strategies that employ transition metal catalysis in the synthesis of oligosaccharides and glycoconjugates. These methods are mild and effective for constructing glycosidic bonds with reduced levels of waste through utilization of sub-stoichiometric amounts of transition metals to promote the glycosylation.

  5. Recent Advances in Transition Metal-Catalyzed Glycosylation

    PubMed Central

    McKay, Matthew J.; Nguyen, Hien M.

    2012-01-01

    Having access to mild and operationally simple techniques for attaining carbohydrate targets will be necessary to facilitate advancement in biological, medicinal, and pharmacological research. Even with the abundance of elegant reports for generating glycosidic linkages, stereoselective construction of α- and β-oligosaccharides and glycoconjugates is by no means trivial. In an era where expanded awareness of the impact we are having on the environment drives the state-of-the-art, synthetic chemists are tasked with developing cleaner and more efficient reactions for achieving their transformations. This movement imparts the value that prevention of waste is always superior to its treatment or cleanup. This review will highlight recent advancement in this regard by examining strategies that employ transition metal catalysis in the synthesis of oligosaccharides and glycoconjugates. These methods are mild and effective for constructing glycosidic bonds with reduced levels of waste through utilization of sub-stoichiometric amounts of transition metals to promote the glycosylation. PMID:22924154

  6. Engineering skyrmions in transition-metal multilayers for spintronics

    PubMed Central

    Dupé, B.; Bihlmayer, G.; Böttcher, M.; Blügel, S.; Heinze, S.

    2016-01-01

    Magnetic skyrmions are localized, topologically protected spin structures that have been proposed for storing or processing information due to their intriguing dynamical and transport properties. Important in terms of applications is the recent discovery of interface stabilized skyrmions as evidenced in ultra-thin transition-metal films. However, so far only skyrmions at interfaces with a single atomic layer of a magnetic material were reported, which greatly limits their potential for application in devices. Here we predict the emergence of skyrmions in [4d/Fe2/5d]n multilayers, that is, structures composed of Fe biatomic layers sandwiched between 4d and 5d transition-metal layers. In these composite structures, the exchange and the Dzyaloshinskii–Moriya interactions that control skyrmion formation can be tuned separately by the two interfaces. This allows engineering skyrmions as shown based on density functional theory and spin dynamics simulations. PMID:27257020

  7. Separation observation of metal-insulator transition and structural phase transition in VO2

    NASA Astrophysics Data System (ADS)

    Kim, Hyun-Tak; Kim, Bong-Jun; Lee, Yong Wook; Chae, Byung Gyu; Yun, Sun Jin; Oh, Soo-Young; Lim, Yong-Sik

    2007-03-01

    An intermediate monoclinic metal phase between the metal-insulator transition (MIT) and the structural phase transition (SPT) is observed with VO2-based two-terminal devices and can be explained in terms of the Mott MIT. The conductivity of this phase linearly increases with increasing temperature up to TSPT 68^oC and becomes maximum at TSPT. The SPT is confirmed by micro-Raman spectroscopy. Optical microscopic observation reveals the absence of a local current path in the metal phase. The current uniformly flows throughout the surface of the VO2 film when the MIT occurs. This device can be used as a programmable critical temperature sensor. (References: New J. Phys. 6 (1994) 52 (http://www.njp.org); Appl. Phys. Lett. 86 (2005) 24210); Physica B 369 (2005) 76; cond-mat/0607577; cond-mat/0608085; cond-mat/0609033).

  8. Metal-insulator and charge ordering transitions in oxide nanostructures

    NASA Astrophysics Data System (ADS)

    Singh, Sujay Kumar

    Strongly correlated oxides are a class of materials wherein interplay of various degrees of freedom results in novel electronic and magnetic phenomena. Vanadium oxides are widely studied correlated materials that exhibit metal-insulator transitions (MIT) in a wide temperature range from 70 K to 380 K. In this Thesis, results from electrical transport measurements on vanadium dioxide (VO2) and vanadium oxide bronze (MxV 2O5) (where M: alkali, alkaline earth, and transition metal cations) are presented and discussed. Although the MIT in VO2 has been studied for more than 50 years, the microscopic origin of the transition is still debated since a slew of external parameters such as light, voltage, and strain are found to significantly alter the transition. Furthermore, recent works on electrically driven switching in VO2 have shown that the role of Joule heating to be a major cause as opposed to electric field. We explore the mechanisms behind the electrically driven switching in single crystalline nanobeams of VO2 through DC and AC transport measurements. The harmonic analysis of the AC measurement data shows that non-uniform Joule heating causes electronic inhomogeneities to develop within the nanobeam and is responsible for driving the transition in VO2. Surprisingly, field assisted emission mechanisms such as Poole-Frenkel effect is found to be absent and the role of percolation is also identified in the electrically driven transition. This Thesis also provides a new insight into the mechanisms behind the electrolyte gating induced resistance modulation and the suppression of MIT in VO2. We show that the metallic phase of VO2 induced by electrolyte gating is due to an electrochemical process and can be both reversible and irreversible under different conditions. The kinetics of the redox processes increase with temperature; a complete suppression of the transition and the stabilization of the metallic phase are achievable by gating in the rutile metallic phase

  9. Cointercalation of titanium dichalcogenides with transition metals and copper

    NASA Astrophysics Data System (ADS)

    Titov, A. A.; Titov, A. N.; Titova, S. G.; Pryanichnikov, S. V.; Chezganov, D. S.

    2017-01-01

    Cointercalated materials are studied, obtained by introducing copper into a TiSe2 lattice preintercalated with transition metals M = Mn, Fe, Co, or Ni. The analysis of the state of cointercalated systems at 950°C shows that copper reduces manganese and iron, but it is incapable of reducing cobalt or nickel. To explain the results, the values of the binding energy of hybrid states M3d/Ti3 d are compared.

  10. The chemistry and physics of transition metal clusters

    SciTech Connect

    Parks, E.K.; Jellinek, J.; Knickelbein, M.B.; Riley, S.J.

    1994-06-01

    In this program the authors study the fundamental properties of isolated clusters of transition metal atoms. Experimental studies of cluster chemistry include determination of cluster structure, reactivity, and the nature of cluster-adsorbate interactions. Studies of physical properties include measurements of cluster ionization potentials and photoabsorption cross sections. Theoretical studies focus on the structure and dynamics of clusters, including isomers, phases and phase changes, interactions with molecules, and fragmentation process.

  11. The energetics of ordered intermetallic alloys (of the transition metals)

    SciTech Connect

    Watson, R.E.; Weinert, M.; Davenport, J.W.; Fernando, G.W.; Bennett, L.H.

    1992-10-01

    The atomically ordered phases in ordered transition metal alloys are discussed. This chapter is divided into: physical parameters controlling phase stability (Hume-Rothery, structural maps, Miedema Hamiltonian), wave functions & band theory, comment on entropy terms, cohesive energies (electron promotion energies, Hund`s rule on orbital effects), structural energies/stabilities of elemental solids, total energies and atomic positions, charge transfer (Au alloys, charge tailing), heats of formation of ordered compounds.

  12. The energetics of ordered intermetallic alloys (of the transition metals)

    SciTech Connect

    Watson, R.E.; Weinert, M.; Davenport, J.W. ); Fernando, G.W. . Dept. of Physics); Bennett, L.H. . Metallurgy Div.)

    1992-01-01

    The atomically ordered phases in ordered transition metal alloys are discussed. This chapter is divided into: physical parameters controlling phase stability (Hume-Rothery, structural maps, Miedema Hamiltonian), wave functions band theory, comment on entropy terms, cohesive energies (electron promotion energies, Hund's rule on orbital effects), structural energies/stabilities of elemental solids, total energies and atomic positions, charge transfer (Au alloys, charge tailing), heats of formation of ordered compounds.

  13. Novel Transition Metal Compounds with Promising Thermoelectric Properties

    NASA Technical Reports Server (NTRS)

    Caillat, T.; Borshchevsky, A.; Fleurial, J. -P.

    1993-01-01

    Progress in the search for new high temperature thermoelectric materials at the Jet Propulsion Laboratory is reviewed. Novel transition metal compounds were selected as potential new high performance thermoelectric materials and criteria of selection are presented and discussed. Samples of these new compounds were prepared at JPL by a variety of techniques. Encouraging experimental results obtained on several of these compounds are reported and show that they have the potential to be the next generation of thermoelectric materials.

  14. Preparation of nanocomposites containing nanoclusters of transition metals

    SciTech Connect

    Milne, S.B.; Lukehart, C.M., Wittig, J.E.

    1996-10-01

    New nanocomposites containing nanoclusters of transition metals have been prepared and characterized by TEM, XRD, and energy dispersive spectroscopy. Organometallic or other coordination compounds functionalized with trialkoxysilyl groups have been synthesized and covalently incorporated into silica xerogels using standard sol-gel techniques. Thermal oxidative treatment of these xerogels in air followed by reduction in hydrogen yielded the desired nanocomposite phases. Using these methods, Mo, Re, Fe, Ru, Os, Pd, Pt, Cu. and Ag nanocomposites have been prepared.

  15. A General Method for Constructing Two-Dimensional Layered Mesoporous Mono- and Binary-Transition-Metal Nitride/Graphene as an Ultra-Efficient Support to Enhance Its Catalytic Activity and Durability for Electrocatalytic Application.

    PubMed

    Liu, Baocang; Huo, Lili; Si, Rui; Liu, Jian; Zhang, Jun

    2016-07-27

    We constructed a series of two-dimensional (2D) layered mesoporous mono- and binary-transition-metal nitride/graphene nanocomposites (TMN/G, TM = Ti, Cr, W, Mo, TiCr, TiW, and TiMo) via an efficient and versatile nanocasting strategy for the first time. The 2D layered mesoporous TMN/G is constituted of small TMN nanoparticles composited with graphene nanosheets and has a large surface area with high porosity. Through decoration with well-dispersed Pt nanoparticles, 2D layered mesoporous Pt/TMN/G catalysts can be obtained that display excellent catalytic activity and stability for methanol electro-oxidation reactions (MOR) and oxygen reduction reactions (ORR) in both acidic and alkaline media. The 2D layered mesoporous binary-Pt/TMN/G catalysts possess catalytic activity superior to that of mono-Pt/TMN/G, graphene free Pt/TMN, Pt/G, and Pt/C catalysts. Encouragingly, the 2D layered mesoporous Pt/Ti0.5Cr0.5N/G catalyst exhibits the best electrocatalytic performance for both MOR and ORR. The outstanding electrocatalytic performance of the Pt/Ti0.5Cr0.5N/G catalyst is rooted in its large surface area, high porosity, strong interaction among Pt, Ti0.5Cr0.5N, and graphene, an excellent electron transfer property facilitated by N-doped graphene, and the small size of Pt and Ti0.5Cr0.5N nanocrystals. The outstanding catalytic performance provides the 2D layered mesoporous Pt/Ti0.5Cr0.5N/G catalyst with a wide range of application prospects in direct methanol fuel cells in both acidic and alkaline media. The synthetic method may be available for constructing other 2D layered mesoporous metal nitrides, carbides, and phosphides.

  16. Bond-strengthening π backdonation in a transition-metal π-diborene complex.

    PubMed

    Braunschweig, Holger; Damme, Alexander; Dewhurst, Rian D; Vargas, Alfredo

    2013-02-01

    Transition-metal catalysis is founded on the principle that electron donation from a metal to a ligand is accepted by an antibonding orbital of the ligand, thereby weakening one of the bonds in the ligand. Without this, the initial step of bond activation in many catalytic processes would simply not occur. This concept is enshrined in the well-accepted Dewar-Chatt-Duncanson model of transition-metal bonding. We present herein experimental and computational evidence for the first true violation of the Dewar-Chatt-Duncanson bonding model, found in a π-diborene complex in which an electron-rich group 10 metal donates electrons into an empty bonding π orbital on the ligand, and thereby strengthens the bond. The complex is also the first transition-metal complex to contain a bound diborene, a species not isolated before, either in its free form or bound to a metal.

  17. Pressure induced structural phase transition in IB transition metal nitrides compounds

    NASA Astrophysics Data System (ADS)

    Soni, Shubhangi; Kaurav, Netram; Jain, A.; Shah, S.; Choudhary, K. K.

    2015-06-01

    Transition metal mononitrides are known as refractory compounds, and they have, relatively, high hardness, brittleness, melting point, and superconducting transition temperature, and they also have interesting optical, electronic, catalytic, and magnetic properties. Evolution of structural properties would be an important step towards realizing the potential technological scenario of this material of class. In the present study, an effective interionic interaction potential (EIOP) is developed to investigate the pressure induced phase transitions in IB transition metal nitrides TMN [TM = Cu, Ag, and Au] compounds. The long range Coulomb, van der Waals (vdW) interaction and the short-range repulsive interaction upto second-neighbor ions within the Hafemeister and Flygare approach with modified ionic charge are properly incorporated in the EIOP. The vdW coefficients are computed following the Slater-Kirkwood variational method, as both the ions are polarizable. The estimated value of the phase transition pressure (Pt) and the magnitude of the discontinuity in volume at the transition pressure are consistent as compared to the reported data.

  18. Pressure induced structural phase transition in IB transition metal nitrides compounds

    SciTech Connect

    Soni, Shubhangi; Kaurav, Netram Jain, A.; Shah, S.; Choudhary, K. K.

    2015-06-24

    Transition metal mononitrides are known as refractory compounds, and they have, relatively, high hardness, brittleness, melting point, and superconducting transition temperature, and they also have interesting optical, electronic, catalytic, and magnetic properties. Evolution of structural properties would be an important step towards realizing the potential technological scenario of this material of class. In the present study, an effective interionic interaction potential (EIOP) is developed to investigate the pressure induced phase transitions in IB transition metal nitrides TMN [TM = Cu, Ag, and Au] compounds. The long range Coulomb, van der Waals (vdW) interaction and the short-range repulsive interaction upto second-neighbor ions within the Hafemeister and Flygare approach with modified ionic charge are properly incorporated in the EIOP. The vdW coefficients are computed following the Slater-Kirkwood variational method, as both the ions are polarizable. The estimated value of the phase transition pressure (Pt) and the magnitude of the discontinuity in volume at the transition pressure are consistent as compared to the reported data.

  19. The development of a biological interface for transition metal implants

    NASA Astrophysics Data System (ADS)

    Melton, Kim R.

    The specific goal of this research was to develop an in vitro model for a root-form endosseous dental implant that contains a periodontal ligament and that is biologically integratable into alveolar bone. This objective was based on the following two hypotheses. (1) The chemical attachment of extracellular matrix proteins to the surface of transition metals increases the number of fibroblast cells attached to the surface of the metal. (2) The chemical attachment of extracellular matrix proteins to the surface of transition metals increases the strength of the fibroblast cell attachment to the surface of the metal. The model needed to have a well-controlled surface that was reproducible. Thus, a layer of Au was deposited over a Ti base, and dithiobis(succinimidylpropionate) (DSP) a chemical containing disulfide groups was adsorbed to the Au. Next, extracellular matrix proteins which are periodontal ligament components were attached to the free end group of the chemical that was adsorbed to the Au. This surface served as an attachment substrate on which additional periodontal ligament components such as fibroblast cells could grow. From this model a new implant interface may be developed. This model was tested using the following polypeptides; collagen type I, collagen type IV, fibronectin, and poly-D-lysine. L929 cells were grown on Ti, Ti + Au, Ti + Au + polypeptide, and Ti + Au + DSP + polypeptide. After 72 hours, the live cells were stained with neutral red. The substrates were then subjected to increasing centrifugal forces. The viable stained cells were fixed onto the substrates and cells were counted. The hypotheses were proven for three polypeptides: fibronectin, collagen type I, and poly-D-lysine. The strongest attachment was found with collagen type I. Collagen type IV did not provide any advantage for attachment over uncoated transition metals.

  20. The role of transition metal ions chemistry on multiphase chemistry

    NASA Astrophysics Data System (ADS)

    Deguillaume, L.; Leriche, M.; Monod, A.; Chaumerliac, N.

    2003-04-01

    A modelling study of the role of transition metal ions chemistry on cloud chemistry is presented. First, new developments of the Model of Multiphase Cloud Chemistry (M2C2) are described: the transition metal ions reactivity and variable photolysis in the aqueous phase. Secondly, three summertime scenarios describing urban, remote and marine conditions are simulated. First, comparisons between results from M2C2 and from CAPRAM2.3 models for the same scenarios (Herrmann et al., 2000) show a good agreement between the two models with respect to their different chemical mechanisms. Secondly, chemical regimes in cloud are analysed to understand the role of transition metal ions chemistry on cloud chemistry. This study focuses on HOx chemistry, which afterwards influences the sulphur and the VOCs chemistry in droplets. The ratio of Fe(II)/Fe(III) exhibits a diurnal variation with values in agreement with the few measurements of Fe speciation available. In the polluted case, sensitivity tests with and without TMI chemistry, show an enhancement of OH concentration in the aqueous phase when TMI chemistry is considered. This implies a more important oxidation of VOCs in droplets, which produces the HO2 radical, the hydrogen peroxide precursor. In fact, the HO2 radical is mainly converted into hydrogen peroxide by reactions between HO2/O2- radicals with Fe(II). This production of hydrogen peroxide leads to a rapid conversion of S(IV) into S(VI) at the beginning of the simulation.

  1. Hydrogen and dihydrogen bonding of transition metal hydrides

    NASA Astrophysics Data System (ADS)

    Jacobsen, Heiko

    2008-04-01

    Intermolecular interactions between a prototypical transition metal hydride WH(CO) 2NO(PH 3) 2 and a small proton donor H 2O have been studied using DFT methodology. The hydride, nitrosyl and carbonyl ligand have been considered as site of protonation. Further, DFT-D calculations in which empirical corrections for the dispersion energy are included, have been carried out. A variety of pure and hybrid density functionals (BP86, PW91, PBE, BLYP, OLYP, B3LYP, B1PW91, PBE0, X3LYP) have been considered, and our calculations indicate the PBE functional and its hybrid variation are well suited for the calculation of transition metal hydride hydrogen and dihydrogen bonding. Dispersive interactions make up for a sizeable portion of the intermolecular interaction, and amount to 20-30% of the bond energy and to 30-40% of the bond enthalpy. An energy decomposition analysis reveals that the H⋯H bond of transition metal hydrides contains both covalent and electrostatic contributions.

  2. Optical properties of transition metal oxide quantum wells

    SciTech Connect

    Lin, Chungwei; Posadas, Agham; Choi, Miri; Demkov, Alexander A.

    2015-01-21

    Fabrication of a quantum well, a structure that confines the electron motion along one or more spatial directions, is a powerful method of controlling the electronic structure and corresponding optical response of a material. For example, semiconductor quantum wells are used to enhance optical properties of laser diodes. The ability to control the growth of transition metal oxide films to atomic precision opens an exciting opportunity of engineering quantum wells in these materials. The wide range of transition metal oxide band gaps offers unprecedented control of confinement while the strong correlation of d-electrons allows for various cooperative phenomena to come into play. Here, we combine density functional theory and tight-binding model Hamiltonian analysis to provide a simple physical picture of transition metal oxide quantum well states using a SrO/SrTiO{sub 3}/SrO heterostructure as an example. The optical properties of the well are investigated by computing the frequency-dependent dielectric functions. The effect of an external electric field, which is essential for electro-optical devices, is also considered.

  3. Optical properties of transition metal oxide quantum wells

    NASA Astrophysics Data System (ADS)

    Lin, Chungwei; Posadas, Agham; Choi, Miri; Demkov, Alexander A.

    2015-01-01

    Fabrication of a quantum well, a structure that confines the electron motion along one or more spatial directions, is a powerful method of controlling the electronic structure and corresponding optical response of a material. For example, semiconductor quantum wells are used to enhance optical properties of laser diodes. The ability to control the growth of transition metal oxide films to atomic precision opens an exciting opportunity of engineering quantum wells in these materials. The wide range of transition metal oxide band gaps offers unprecedented control of confinement while the strong correlation of d-electrons allows for various cooperative phenomena to come into play. Here, we combine density functional theory and tight-binding model Hamiltonian analysis to provide a simple physical picture of transition metal oxide quantum well states using a SrO/SrTiO3/SrO heterostructure as an example. The optical properties of the well are investigated by computing the frequency-dependent dielectric functions. The effect of an external electric field, which is essential for electro-optical devices, is also considered.

  4. Electronic Principles Governing the Stability and Reactivity of Ligated Metal and Silicon Encapsulated Transition Metal Clusters

    NASA Astrophysics Data System (ADS)

    Abreu, Marissa Baddick

    A thorough understanding of the underlying electronic principles guiding the stability and reactivity of clusters has direct implications for the identification of stable clusters for incorporation into clusters-assembled materials with tunable properties. This work explores the electronic principles governing the stability and reactivity of two types of clusters: ligated metal clusters and silicon encapsulated transition metal clusters. In the first case, the reactivity of iodine-protected aluminum clusters, Al13Ix - (x=0-4) and Al14Iy- (y=0-5), with the protic species methanol was studied. The symmetrical ground states of Al13Ix- showed no reactivity with methanol but reactivity was achieved in a higher energy isomer of Al 13I2- with iodines on adjacent aluminum atoms -- complementary Lewis acid-base active sites were induced on the opposite side of the cluster capable of breaking the O-H bond in methanol. Al 14Iy- (y=2-5) react with methanol, but only at the ligated adatom site. Reaction of methanol with Al14 - and Al14I- showed that ligation of the adatom was necessary for the reaction to occur there -- revealing the concept of a ligand-activated adatom. In the second case, the study focused heavily on CrSi12, a silicon encapsulated transition metal cluster whose stability and the reason for that stability has been debated heavily in the literature. Calculations of the energetic properties of CrSi n (n=6-16) revealed both CrSi12 and CrSi14 to have enhanced stability relative to other clusters; however CrSi12 lacks all the traditional markers of a magic cluster. Molecular orbital analysis of each of these clusters showed the CNFEG model to be inadequate in describing their stability. Because the 3dz2 orbital of Cr is unfilled in CrSi12, this cluster has only 16 effective valence electrons, meaning that the 18-electron rule is not applicable. The moderate stability of CrSi 12 can be accounted for by the crystal-field splitting of the 3d orbitals, which pushes the

  5. Control of Exciton Valley Coherence in Transition Metal Dichalcogenide Monolayers

    NASA Astrophysics Data System (ADS)

    Wang, G.; Marie, X.; Liu, B. L.; Amand, T.; Robert, C.; Cadiz, F.; Renucci, P.; Urbaszek, B.

    2016-10-01

    The direct gap interband transitions in transition metal dichalcogenide monolayers are governed by chiral optical selection rules. Determined by laser helicity, optical transitions in either the K+ or K- valley in momentum space are induced. Linearly polarized laser excitation prepares a coherent superposition of valley states. Here, we demonstrate the control of the exciton valley coherence in monolayer WSe2 by tuning the applied magnetic field perpendicular to the monolayer plane. We show rotation of this coherent superposition of valley states by angles as large as 30° in applied fields up to 9 T. This exciton valley coherence control on the ps time scale could be an important step towards complete control of qubits based on the valley degree of freedom.

  6. Transition-metal-nitride films for optical applications

    NASA Astrophysics Data System (ADS)

    Ribbing, Carl-Gustaf; Roos, Arne

    1997-10-01

    The three transition metal nitrides TiN, ZrN and HfN have remarkably high stability due to their bonding: a mixture of covalent and ionic contributions. The optical properties of these nitride compounds are free-electron like to a surprisingly large extent, in particular in comparison with the corresponding carbides. It is argued that the interband optical excitations of the d-electrons are restricted by selection rules, resulting in a Drude like behavior of these d-electron compounds. Hitherto, one of the main optical applications has been as opaque, wear-resistant replacements for gold-coatings. This review includes the efforts to study, understand and enhance the optical selectivity of group IVB transition metal nitrides as the selective surface in high temperature thermal solar absorbers, as the metal layer in LE-coatings on energy-efficient or solar control windows and as a Langmuir probe coating. The reflectance edge is not in the optimum position for absorber applications and attempts to shift it with alloying were unsuccessful. Recent development of inhomogeneous, cermet- type nitrides hold some promise. The LE-coatings will not reach as high selectivity as the current noble metal based multilayers, but many find use in aggressive environments because of their excellent stability.

  7. Peierls potential for crowdions in the bcc transition metals.

    PubMed

    Fitzgerald, S P; Nguyen-Manh, D

    2008-09-12

    We present the first derivation of the analytic expression for the Peierls-Nabarro potential for crowdion migration using the double sine-Gordon model. The analysis is guided by the group-specific trend in the shapes of the periodic lattice potentials calculated for the body-centered-cubic transition metals in groups 5B and 6B of the periodic table. We combine density-functional calculations of the crowdion's profile and environment with an extended version of the analytical Frenkel-Kontorova model, and determine the effective potential experienced by the defect's center of mass. This reveals important underlying differences between the metals in these groups, which are inaccessible to either the numerical or analytical approaches alone, and accounts for the previously unexplained significantly higher crowdion migration temperatures observed in the metals of group 6B relative to those of group 5B.

  8. Transition-metal prion protein attachment: Competition with copper

    NASA Astrophysics Data System (ADS)

    Hodak, Miroslav; Bernholc, Jerry

    2012-02-01

    Prion protein, PrP, is a protein capable of binding copper ions in multiple modes depending on their concentration. Misfolded PrP is implicated in a group of neurodegenerative diseases, which include ``mad cow disease'' and its human form, variant Creutzfeld-Jacob disease. An increasing amount of evidence suggests that attachment of non-copper metal ions to PrP triggers transformations to abnormal forms similar to those observed in prion diseases. In this work, we use hybrid Kohn-Sham/orbital-free density functional theory simulations to investigate copper replacement by other transition metals that bind to PrP, including zinc, iron and manganese. We consider all known copper binding modes in the N-terminal domain of PrP. Our calculations identify modes most susceptible to copper replacement and reveal metals that can successfully compete with copper for attachment to PrP.

  9. Capacitive network near the metal insulator transition in Vanadium Dioxide

    NASA Astrophysics Data System (ADS)

    Ramirez, J. G.; Patino, E. J.; Schmidt, R.; Sharoni, A.; Gomez, M. E.; Schuller, I. K.

    2011-03-01

    Recent infrared spectroscopy and transport measurements in nano-scaled junction of VO2 have revealed the existence of phase separation into metallic and insulating phases. Here we present Impedance spectroscopy measurements performed in high quality Vanadium dioxide (VO2) thin films for the first time. This technique allows distinguishing between the resistive and capacitive response of the VO2 films and provides the dielectric properties across the metal-insulator transition (MIT). The film capacitance exhibits an unusual increase close to the MIT which implies the formation of a capacitor network produced by the nanoscale phase separation of metallic and insulating phases. This work has been supported by AFOSR, COLCIENCIAS, CENM and Ramon y Cajal Fellowship.

  10. Method for treating rare earth-transition metal scrap

    DOEpatents

    Schmidt, Frederick A.; Peterson, David T.; Wheelock, John T.; Jones, Lawrence L.

    1992-12-29

    Rare earth-transition metal (e.g., iron) scrap (e.g., Nd-Fe-B scrap) is flux (slag) remelted to reduce tramp non-metallic impurities, such as oxygen and nitrogen, and metallic impurities, such as Li, Na, Al, etc., picked up by the scrap from previous fabrication operations. The tramp impurities are reduced to concentrations acceptable for reuse of the treated alloy in the manufacture of end-use articles, such as permanent magnets. The scrap is electroslag or inductoslag melted using a prefused, rare earth fluoride-bearing flux of CaF.sub.2, CaCl.sub.2 or mixtures thereof or the slag resulting from practice of the thermite reduction process to make a rare earth-iron alloy.

  11. Method for treating rare earth-transition metal scrap

    DOEpatents

    Schmidt, F.A.; Peterson, D.T.; Wheelock, J.T.; Jones, L.L.

    1992-12-29

    Rare earth-transition metal (e.g., iron) scrap (e.g., Nd-Fe-B scrap) is flux (slag) remelted to reduce tramp non-metallic impurities, such as oxygen and nitrogen, and metallic impurities, such as Li, Na, Al, etc., picked up by the scrap from previous fabrication operations. The tramp impurities are reduced to concentrations acceptable for reuse of the treated alloy in the manufacture of end-use articles, such as permanent magnets. The scrap is electroslag or inductoslag melted using a rare earth fluoride-bearing flux of CaF[sub 2], CaCl[sub 2] or mixtures thereof or the slag resulting from practice of the thermite reduction process to make a rare earth-iron alloy. 3 figs.

  12. Thermophysical Property Measurements of Silicon-Transition Metal Alloys

    NASA Technical Reports Server (NTRS)

    Banish, R. Michael; Erwin, William R.; Sansoucie, Michael P.; Lee, Jonghyun; Gave, Matthew A.

    2014-01-01

    Metals and metallic alloys often have high melting temperatures and highly reactive liquids. Processing reactive liquids in containers can result in significant contamination and limited undercooling. This is particularly true for molten silicon and it alloys. Silicon is commonly termed "the universal solvent". The viscosity, surface tension, and density of several silicon-transition metal alloys were determined using the Electrostatic Levitator system at the Marshall Space Flight Center. The temperature dependence of the viscosity followed an Arrhenius dependence, and the surface tension followed a linear temperature dependence. The density of the melts, including the undercooled region, showed a linear behavior as well. Viscosity and surface tension values were obtain for several of the alloys in the undercooled region.

  13. Open volume defects and magnetic phase transition in Fe60Al40 transition metal aluminide

    NASA Astrophysics Data System (ADS)

    Liedke, M. O.; Anwand, W.; Bali, R.; Cornelius, S.; Butterling, M.; Trinh, T. T.; Wagner, A.; Salamon, S.; Walecki, D.; Smekhova, A.; Wende, H.; Potzger, K.

    2015-04-01

    Magnetic phase transition in the Fe60Al40 transition metal aluminide from the ferromagnetic disordered A2-phase to the paramagnetic ordered B2-phase as a function of annealing up to 1000 °C has been investigated by means of magneto-optical and spectroscopy techniques, i.e., Kerr effect, positron annihilation, and Mössbauer spectroscopy. The positron annihilation spectroscopy has been performed in-situ sequentially after each annealing step at the Apparatus for In-situ Defect Analysis that is a unique tool combining positron annihilation spectroscopy with temperature treatment, material evaporation, ion irradiation, and sheet resistance measurement techniques. The overall goal was to investigate the importance of the open volume defects onto the magnetic phase transition. No evidence of variation in the vacancy concentration in matching the magnetic phase transition temperature range (400-600 °C) has been found, whereas higher temperatures showed an increase in the vacancy concentration.

  14. A Transition to Metallic Hydrogen: Evidence of the Plasma Phase Transition

    NASA Astrophysics Data System (ADS)

    Silvera, Isaac; Zaghoo, Mohamed; Salamat, Ashkan

    The insulator-metal transition in hydrogen is one of the most outstanding problems in condensed matter physics. The high-pressure metallic phase is now predicted to be liquid atomic from T =0 K to very high temperatures. We have conducted measurements of optical properties of hot dense hydrogen in the region of 1.1-1.7 Mbar and up to 2200 K in a diamond anvil cell using pulsed laser heating of the sample. We present evidence in two forms: a plateau in the heating curves (average laser power vs temperature) characteristic of a first-order phase transition with latent heat, and changes in transmittance and reflectance characteristic of a metal for temperatures above the plateau temperature. For thick films the reflectance saturates at ~0.5. The phase line of this transition has a negative slope in agreement with theories of the so-called plasma phase transition. The NSF, Grant DMR-1308641, the DOE Stockpile Stewardship Academic Alliance Program, Grant DE-FG52-10NA29656, and NASA Earth and Space Science Fellowship Program, Award NNX14AP17H supported this research.

  15. Polaronic Transport in Phosphate Glasses Containing Transition Metal Ions

    NASA Astrophysics Data System (ADS)

    Henderson, Mark

    The goal of this dissertation is to characterize the basic transport properties of phosphate glasses containing various amounts of TIs and to identify and explain any electronic phase transitions which may occur. The P2 O5-V2O5-WO3 (PVW) glass system will be analyzed to find the effect of TI concentration on conduction. In addition, the effect of the relative concentrations of network forming ions (SiO2 and P2O5) on transport will be studied in the P2O5-SiO2-Fe2O 3 (PSF) system. Also presented is a numerical study on a tight-binding model adapted for the purposes of modelling Gaussian traps, mimicking TI's, which are arranged in an extended network. The results of this project will contribute to the development of fundamental theories on the electronic transport in glasses containing mixtures of transition oxides as well as those containing multiple network formers without discernible phase separation. The present study on the PVW follows up on previous investigation into the effect on mixed transition ions in oxide glasses. Past research has focused on glasses containing transition metal ions from the 3d row. The inclusion of tungsten, a 5d transition metal, adds a layer of complexity through the mismatch of the energies of the orbitals contributing to localized states. The data have indicated that a transition reminiscent of a metal-insulator transition (MIT) occurs in this system as the concentration of tungsten increases. As opposed to some other MIT-like transitions found in phosphate glass systems, there seems to be no polaron to bipolaron conversion. Instead, the individual localization parameter for tungsten noticeably decreases dramatically at the transition point as well as the adiabaticity. Another distinctive feature of this project is the study of the PSF system, which contains two true network formers, phosphorous pentoxide (P2O 5) and silicon dioxide (SiO2). It is not usually possible to do a reliable investigation of the conduction properties of

  16. Synthesis, crystal structures, molecular docking, and in vitro biological activities evaluation of transition metal complexes with 4-(3,4-dichlorophenyl) piperazine-1-carboxylic acid

    NASA Astrophysics Data System (ADS)

    Chen, Zhi-Jian; Chen, Ya-Na; Xu, Chun-Na; Zhao, Shan-Shan; Cao, Qi-Yue; Qian, Shao-Song; Qin, Jie; Zhu, Hai-Liang

    2016-08-01

    Three novel mononuclear complexes, [MⅡ(L)2·2H2O], (M = Cu, Ni or Cd; HL = 4-(3,4-dichlorophenyl)piperazine-1-carboxylic acid)were synthesized and structurally determined by single-crystal X-ray diffraction. Molecular docking study preliminarily revealed that complex 1 had potential urease inhibitory activity. In accordance with the result of calculation, in vitro tests of the inhibitory activities of complexes 1-3 against jack bean urease showed complex 1 (IC50 = 8.17 ± 0.91 μM) had better inhibitory activities than the positive reference acetohydroxamic acid (AHA) (IC50 = 26.99 ± 1.43 μM), while complexes 2 and 3 showed no inhibitory activities., kinetics study was carried out to explore the mechanism of the inhibiting of the enzyme, and the result indicated that complex 1 was a competitive inhibitor of urease. Albumin binding experiment and in vitro toxicity evaluation of complex 1 were implemented to explore its Pharmacological properties.

  17. Spectroscopic and biological activities studies of bivalent transition metal complexes of Schiff bases derived from condensation of 1,4-phenylenediamine and benzopyrone derivatives.

    PubMed

    Sherif, Omaima E; Abdel-Kader, Nora S

    2014-01-03

    Many tools of analysis such as elemental analyses, infrared, ultraviolet-visible, electron spin resonance (ESR) and thermal analysis, as well as conductivity and magnetic susceptibility measurements were used to elucidate the structures of the newly prepared Co(II), Ni(II) and Cu(II) complexes with Schiff bases derived from the condensation of 1,4-phenylenediamine with 6-formyl-7-hydroxy-5-methoxy-2-methylbenzo-pyran-4-one (H2L) or 5,7-dihydroxy-6-formyl-2-methylbenzopyran-4-one (H4L). The data showed that all formed complexes are 1:1 or 2:2 (M:L) and non-electrolyte chelates. The Co(II) and Cu(II) complexes of the two Schiff bases were screened for antibacterial activities by the disk diffusion method. The antibacterial activity was screened using Escherichia coli and Staphylococcus capitis but the antifungal activity was examined by using Aspergillus flavus and Candida albicans. The Results showed that the tested complexes have antibacterial, except CuH4L, but not antifungal activities.

  18. Thermochemistry and Geometries for Transition-Metal Chemistry from the Random Phase Approximation.

    PubMed

    Waitt, Craig; Ferrara, Nashali M; Eshuis, Henk

    2016-11-08

    Performance of the random phase approximation (RPA) is tested for thermochemistry and geometries of transition-metal chemistry using various benchmarks obtained either computationally or experimentally. Comparison is made to popular (semi)local meta- and hybrid density functionals as well as to the second-order Møller-Plesset perturbation theory (MP2) and its spin-component-scaled derivatives. The benchmark sets include reaction energies, barrier heights, and dissociation energies of prototype bond-activation reactions, dissociation energies for a set of large transition-metal complexes, bond lengths and dissociation energies of metal hydride ions, and bond lengths and angles of a set of closed-shell first-row transition-metal complexes. The emphasis is on first-row transition-metal chemistry, though for energies, elements beyond the first-row are included. Attention is paid to the basis set convergence of RPA. For thermochemistry, RPA performs on par or better than the density functional theory (DFT) functionals presented and is significantly more accurate than MP2. The largest errors are observed in dissociation energies where the electronic environment is altered substantially. For structural parameters, very good results were obtained, and RPA meets the high quality of structures from DFT. In most cases, well-converged structures are obtained with basis sets of triple-zeta quality. MP2 optimized values can often not be obtained and are on average of inferior quality. Though chemical accuracy is not reached, the RPA method is a step forward toward a systematic, parameter-free, all-round method to describe transition-metal chemistry.

  19. Metal to insulator transition in Sb doped SnO2 monocrystalline nanowires thin films

    NASA Astrophysics Data System (ADS)

    Costa, I. M.; Bernardo, E. P.; Marangoni, B. S.; Leite, E. R.; Chiquito, A. J.

    2016-12-01

    We report on the growth and transport properties of single crystalline Sb doped SnO2 wires grown from chemical vapour deposition. While undoped samples presented semiconducting behaviour, doped ones clearly undergo a transition from an insulating state ( d R /d T <0 ) to a metallic one ( d R /d T >0 ) around 130 -150 K depending on the doping level. Data analysis in the framework of the metal-to-insulator transition theories allowed us to investigate the underlying physics: electron-electron and electron-phonon interactions were identified as the scattering mechanisms present in the metallic phase, while the conduction mechanism of the semiconducting phase (undoped sample) was characterized by thermal activation and variable range hopping mechanisms.

  20. Method of synthesizing bulk transition metal carbide, nitride and phosphide catalysts

    DOEpatents

    Choi, Jae Soon; Armstrong, Beth L; Schwartz, Viviane

    2015-04-21

    A method for synthesizing catalyst beads of bulk transmission metal carbides, nitrides and phosphides is provided. The method includes providing an aqueous suspension of transition metal oxide particles in a gel forming base, dropping the suspension into an aqueous solution to form a gel bead matrix, heating the bead to remove the binder, and carburizing, nitriding or phosphiding the bead to form a transition metal carbide, nitride, or phosphide catalyst bead. The method can be tuned for control of porosity, mechanical strength, and dopant content of the beads. The produced catalyst beads are catalytically active, mechanically robust, and suitable for packed-bed reactor applications. The produced catalyst beads are suitable for biomass conversion, petrochemistry, petroleum refining, electrocatalysis, and other applications.

  1. A Transition Metal Complex (Venus Flytrap Cluster) for Radioimmunodetection and Radioimmunotherapy

    NASA Astrophysics Data System (ADS)

    Paxton, Raymond J.; Beatty, Barbara G.; Hawthorne, M. Frederick; Varadarajan, Aravamuthan; Williams, Lawrence E.; Curtis, Frederick L.; Knobler, Carolyn B.; Beatty, J. David; Shiveley, John E.

    1991-04-01

    A novel transition metal complex, Venus flytrap cluster (VFC), is described for the preparation of radiolabeled antibodies. VFC contained 57Co, which was held tightly between the faces of two covalently bridged carborane ligands by cluster bonding of the metal with appropriate ligand orbitals. Anti-carcinoembryonic antigen monoclonal antibody T84.66 was conjugated to 57Co-VFC with full retention of immunological activity. Biodistribution studies in nude mice bearing carcinoembryonic antigen-producing tumors showed excellent tumor localization of 57Co-VFC-T84.66. The accumulation of radionuclide in normal liver was low and independent of dose, which may reflect the stability of the radionuclide complex. These results presage the use of VFC systems for binding transition metals that are clinically useful for radio-immunodiagnosis and radioimmunotherapy.

  2. Control of Magnetic Properties Across Metal to Insulator Transitions

    NASA Astrophysics Data System (ADS)

    de La Venta, Jose

    2013-03-01

    Controlling the magnetic properties of ferromagnetic (FM) thin films without magnetic fields is an on-going challenge in condensed matter physics with multiple technological implications. External stimuli and proximity effects are the most used methods to control the magnetic properties. An interesting possibility arises when ferromagnets are in proximity to materials that undergo a metal-insulator (MIT) and structural phase transition (SPT). The stress associated with the structural changes produces a magnetoelastic anisotropy in proximity coupled ferromagnetic films that allows controlling the magnetic properties without magnetic fields. Canonical examples of materials that undergo MIT and SPT are the vanadium oxides (VO2 and V2O3) . VO2 undergoes a metal/rutile to an insulator/monoclinic phase transition at 340 K. In V2O3 the transition at 160 K is from a metallic/rhombohedral to an insulating/ monoclinic phase. We have investigated the magnetic properties of different combinations of ferromagnetic (Ni, Co and Fe) and vanadium oxide thin films. The (0.32%) volume expansion in VO2 or the (1.4%) volume decrease in V2O3 across the MIT produces an interfacial stress in the FM overlayer. We show that the coercivities and magnetizations of the ferromagnetic films grown on vanadium oxides are strongly affected by the phase transition. The changes in coercivity can be as large as 168% and occur in a very narrow temperature interval. These effects can be controlled by the thickness and deposition conditions of the different ferromagnetic films. For VO2/Ni bilayers the large change in the coercivity occurring above room temperature opens the possibilities for technological applications. Work done in collaboration with Siming Wang, J. G. Ramirez, and Ivan K. Schuller. Funded by the US DoE, Office of Basic Energy Sciences, under Award FG03-87ER-45332 and the Air Force Office of Scientific Research No. FA9550-12-1-0381.

  3. Disorder and metal-insulator transitions in Weyl semimetals

    NASA Astrophysics Data System (ADS)

    Jiang, Hua; Chen, Chui-Zhen; Song, Juntao; Sun, Qing-Feng; Wang, Ziqiang; Xie, X. C.

    The Weyl semimetal (WSM) is a newly proposed quantum state of matter. It has Weyl nodes in bulk excitations and Fermi arcs surface states. We study the effects of disorder and localization in WSMs and find three novel phase transitions.(I) Two Weyl nodes near the Brillouin zone boundary can be annihilated pairwise by disorder scattering, resulting in the opening of a topologically nontrivial gap and a transition from a WSM to a three-dimensional (3D) quantum anomalous Hall state. (II) When the two Weyl nodes are well separated in momentum space, the emergent bulk extended states can give rise to a direct transition from a WSM to a 3D diffusive anomalous Hall metal. (III) Two Weyl nodes can emerge near the zone center when an insulating gap closes with increasing disorder, enabling a direct transition from a normal band insulator to a WSM. We determine the phase diagram by numerically computing the localization length and the Hall conductivity, and propose that the novel phase transitions can be realized on a photonic lattice.

  4. Disorder and Metal-Insulator Transitions in Weyl Semimetals

    NASA Astrophysics Data System (ADS)

    Chen, Chui-Zhen; Song, Juntao; Jiang, Hua; Sun, Qing-feng; Wang, Ziqiang; Xie, X. C.

    2015-12-01

    The Weyl semimetal (WSM) is a newly proposed quantum state of matter. It has Weyl nodes in bulk excitations and Fermi arc surface states. We study the effects of disorder and localization in WSMs and find three novel phase transitions. (i) Two Weyl nodes near the Brillouin zone boundary can be annihilated pairwise by disorder scattering, resulting in the opening of a topologically nontrivial gap and a transition from a WSM to a three-dimensional quantum anomalous Hall state. (ii) When the two Weyl nodes are well separated in momentum space, the emergent bulk extended states can give rise to a direct transition from a WSM to a 3D diffusive anomalous Hall metal. (iii) Two Weyl nodes can emerge near the zone center when an insulating gap closes with increasing disorder, enabling a direct transition from a normal band insulator to a WSM. We determine the phase diagram by numerically computing the localization length and the Hall conductivity, and propose that the novel phase transitions can be realized on a photonic lattice.

  5. Transition metal ion capture using functional mesoporous carbon made with 1,10-phenanthroline☆

    PubMed Central

    Chouyyok, Wilaiwan; Yantasee, Wassana; Shin, Yongsoon; Grudzien, Rafal M.; Fryxell, Glen E.

    2012-01-01

    Functional mesoporous carbon has been built using 1,10-phenanthroline as the fundamental building block, resulting in a nanoporous, high surface area sorbent capable of selectively binding transition metal ions. This material had a specific surface area of 870 m2/g, an average pore size of about 30 Å, and contained as much as 8.2 wt% N. Under acidic conditions, where the 1,10-phenanthroline ligand is protonated, this material was found to be an effective anion exchange material for transition metal anions like PdCl42- and H2VO41-. 1,10-Phenanthroline functionalized mesoporous carbon (“Phen-FMC”) was found to have a high affinity for Cu(II), even down to a pH of 1. At pHs above 5, Phen-FMC was found to bind a variety of transition metal cations (e.g. Co(II), Ni(II), Zn(II), etc.) from filtered ground water, river water and seawater. Phen-FMC displayed rapid sorption kinetics with Co(II) in filtered river water, reaching equilibrium in less than an hour, and easily lowering the [Co(II)] to sub-ppb levels. Phen-FMC was found to be more effective for transition metal ion capture than ion-exchange resin or activated carbon. PMID:23762013

  6. First-principles study on transition metal-doped anatase TiO2

    PubMed Central

    2014-01-01

    The electronic structures, formation energies, and band edge positions of anatase TiO2 doped with transition metals have been analyzed by ab initio band calculations based on the density functional theory with the planewave ultrasoft pseudopotential method. The model structures of transition metal-doped TiO2 were constructed by using the 24-atom 2 × 1 × 1 supercell of anatase TiO2 with one Ti atom replaced by a transition metal atom. The results indicate that most transition metal doping can narrow the band gap of TiO2, lead to the improvement in the photoreactivity of TiO2, and simultaneously maintain strong redox potential. Under O-rich growth condition, the preparation of Co-, Cr-, and Ni-doped TiO2 becomes relatively easy in the experiment due to their negative impurity formation energies, which suggests that these doping systems are easy to obtain and with good stability. The theoretical calculations could provide meaningful guides to develop more active photocatalysts with visible light response. PMID:24472374

  7. Active Control of Transition and Turbulence

    NASA Technical Reports Server (NTRS)

    Maestrello, Lucio

    1987-01-01

    Two active means of manipulating boundary-layer flow developed, one controlling laminar-to-turbulent transition, other controlling amplitude of turbulent fluctuation. Purpose to control skin-friction drag over surfaces inside inlets and ducts. Resulting turbulence downstream has lower skin-friction drag than equivalent flow developing over same surfaces in absence of intervention. Heating strips trigger turbulence while transition amplitude and bandwidth controlled by acoustic signal.

  8. Savannah River Site prioritization of transition activities

    SciTech Connect

    Finley, R.H.

    1993-11-01

    Effective management of SRS conversion from primarily a production facility to other missions (or Decontamination and Decommissioning (D&D)) requires a systematic and consistent method of prioritizing the transition activities. This report discusses the design of a prioritizing method developed to achieve systematic and consistent methods of prioritizing these activities.

  9. Enhancing conductivity of metallic carbon nanotube networks by transition metal adsorption

    SciTech Connect

    Ketolainen, T. Havu, V.; Puska, M. J.

    2015-02-07

    The conductivity of carbon nanotube thin films is mainly determined by carbon nanotube junctions, the resistance of which can be reduced by several different methods. We investigate electronic transport through carbon nanotube junctions in a four-terminal configuration, where two metallic single-wall carbon nanotubes are linked by a group 6 transition metal atom. The transport calculations are based on the Green’s function method combined with the density-functional theory. The transition metal atom is found to enhance the transport through the junction near the Fermi level. However, the size of the nanotube affects the improvement in the conductivity. The enhancement is related to the hybridization of chromium and carbon atom orbitals, which is clearly reflected in the character of eigenstates near the Fermi level. The effects of chromium atoms and precursor molecules remaining adsorbed on the nanotubes outside the junctions are also examined.

  10. Synthesis, characterization, molecular modeling and antioxidant activity of Girard‧s T thiosemicarbazide and its complexes with some transition metal ions

    NASA Astrophysics Data System (ADS)

    El-Gammal, O. A.; Mostafa, M. M.

    2014-06-01

    The chelation behavior of N-{[(allylamino) thiomethyl] hydrazinocarbonylmethyl} trimethylammonium chloride (H3ATHC) towards VO2+, Co2+, Ni2+, Cu2+, Zn2+ and UO22+ ions have been studied. The structures of the complexes were elucidated using elemental analyses, spectral (IR, UV-visible, 1H NMR and ESR and mass) as well as magnetic and thermal measurements. The ligand acted as ON bidentate, ONS tridentate donor forming mononuclear complexes. A tetrahedral geometry for Co2+, square-planar for Ni2+ and Cu2+, an octahedral for Zn2+ and a square-pyramidal arrangement for VO2+ complexes were proposed, respectively. The EPR spectra of Cu2+ and VO2+ complexes confirmed the suggested geometries with values of α2 and β2 indicating that the in-plane σ-bonding and in-plane π-bonding are appreciably covalent, and were consistent with very strong in-plane σ bonding in the complexes. Also, the bond length, bond angle, HOMO, LUMO, dipole moment and charges on the atoms have been calculated. Also, the thermal behavior and kinetic parameters were determined using Coats-Redfern and Horowitz-Metzger methods. Furthermore, the synthesized compounds were screened for their superoxide-scavenging activity in the PMS/NADH-NBT system as well as their scavenging effect on ABTS (2,2‧-azino-bis(3-ethyl benzthiazoline-6-sulfonic acid) and 2,2-diphenyl-1-picrylhydrazyl(DPPH) radicals. Among these compounds, the ligand and Zn2+ complex, exhibited the potent ABTS (2,2‧-azino-bis(3-ethyl benzthiazoline-6-sulfonic acid) radical scavenging activity, comparable to that of vitamin C.

  11. Ligand-Assisted Co-Assembly Approach toward Mesoporous Hybrid Catalysts of Transition-Metal Oxides and Noble Metals: Photochemical Water Splitting.

    PubMed

    Liu, Ben; Kuo, Chung-Hao; Chen, Jiejie; Luo, Zhu; Thanneeru, Srinivas; Li, Weikun; Song, Wenqiao; Biswas, Sourav; Suib, Steven L; He, Jie

    2015-07-27

    A bottom-up synthetic approach was developed for the preparation of mesoporous transition-metal-oxide/noble-metal hybrid catalysts through ligand-assisted co-assembly of amphiphilic block-copolymer micelles and polymer-tethered noble-metal nanoparticles (NPs). The synthetic approach offers a general and straightforward method to precisely tune the sizes and loadings of noble-metal NPs in metal oxides. This system thus provides a solid platform to clearly understand the role of noble-metal NPs in photochemical water splitting. The presence of trace amounts of metal NPs (≈0.1 wt %) can enhance the photocatalytic activity for water splitting up to a factor of four. The findings can conceivably be applied to other semiconductors/noble-metal catalysts, which may stand out as a new methodology to build highly efficient solar energy conversion systems.

  12. Spin-exchange interaction between transition metals and metalloids in soft-ferromagnetic metallic glasses

    NASA Astrophysics Data System (ADS)

    Das, Santanu; Choudhary, Kamal; Chernatynskiy, Aleksandr; Choi Yim, Haein; Bandyopadhyay, Asis K.; Mukherjee, Sundeep

    2016-06-01

    High-performance magnetic materials have immense industrial and scientific importance in wide-ranging electronic, electromechanical, and medical device technologies. Metallic glasses with a fully amorphous structure are particularly suited for advanced soft-magnetic applications. However, fundamental scientific understanding is lacking for the spin-exchange interaction between metal and metalloid atoms, which typically constitute a metallic glass. Using an integrated experimental and molecular dynamics approach, we demonstrate the mechanism of electron interaction between transition metals and metalloids. Spin-exchange interactions were investigated for a Fe-Co metallic glass system of composition [(Co1-x Fe x )0.75B0.2Si0.05]96Cr4. The saturation magnetization increased with higher Fe concentration, but the trend significantly deviated from simple rule of mixtures. Ab initio molecular dynamics simulation was used to identify the ferromagnetic/anti-ferromagnetic interaction between the transition metals and metalloids. The overlapping band-structure and density of states represent ‘Stoner type’ magnetization for the amorphous alloys in contrast to ‘Heisenberg type’ in crystalline iron. The enhancement of magnetization by increasing iron was attributed to the interaction between Fe 3d and B 2p bands, which was further validated by valence-band study.

  13. Influence of Surface Morphology on the Antimicrobial Effect of Transition Metal Oxides in Polymer Surface.

    PubMed

    Oh, Yoo Jin; Hubauer-Brenner, Michael; Hinterdorfer, Peter

    2015-10-01

    In this study, the physical properties of transition metal oxide surfaces were examined using scanning probe microscopic (SPM) techniques for elucidating the antimicrobial activity of molybdenum trioxide (MoO3), tungsten trioxide (WO3), and zinc oxide (ZnO) embedded into the polymers thermoplastic polyurethane (TPU) and polypropylene (PP). We utilized atomic force microscopy (AFM) in the contact imaging mode and its derivative single-pass Kelvin probe force microscopy for investigating samples that were presumably identical in their compositions, but showed different antimicrobial activity in bacterial adhesion tests. Our results revealed that surfaces with larger roughness and higher surface potential variation showed stronger antimicrobial activities compared to smoother and homogeneously charge-distributed surfaces. In addition, capacitance gradient (dC/dZ) measurements were performed to elucidate the antimicrobial activity arising from the different dielectric behavior of the transition metal oxides in this heterogeneous polymer surface. We found that the nano-scale exposure of transition metal oxides on polymer surfaces provided strong antimicrobial effects. Applications arising from our studies will be useful for public and healthcare environments.

  14. Low temperature synthesis of transition metal oxides containing surfactant ions

    NASA Astrophysics Data System (ADS)

    Janauer, Gerald Gilbert

    1998-11-01

    Recently there has been much interest in reacting vanadium oxides hydrothermally with cationic surfactants to form novel layered compounds. A series of new transition metal oxides, however, has also been formed at or near room temperature in open containers. Synthesis, characterization, and proposed mechanisms of formation are the focus of this work. Low temperature reactions of vanadium pentoxide and ammonium transition metallates with long chain amine surfactants, such as dodecyltrimethylammonium bromide yielded interesting new products many of which are layered phases. DTAsb4\\ Hsb2Vsb{10}Osb{28}. 8Hsb2O, a layered highly crystalline phase, is the first such phase for which a single crystal X-ray structure has been determined. The unit cell for this material was found to be triclinic with space group P1-, cell parameters a=9.8945(3)A, b=11.5962(1)A, c=21.9238(2)A, alpha=95.153(2)sp°,\\ beta=93.778(1)sp°, and gamma=101.360(1)sp°. Additionally, a novel tungsten, a molybdenum and a dichromate phase will be discussed. Both the tungsten and the dichromate materials were indexed from their powder diffraction patterns yielding monoclinic unit cells. The tungsten material was found to have a=50.56(4)A, b=54.41(4)A, c=13.12(1)A, and beta=99.21sp°. The dichromate compound was determined to have a=26.757(5)A, b=10.458(2)A, c=14.829(3)A and beta=98.01(1)sp°. Interlayer spacings for the lamellar dichromate and molybdenum phases were d001 = 28.7 A, and d001 = 22.9 A. The synthesis, characterization, composition, and structure of these transition metal oxide-surfactant materials will be discussed.

  15. The strong reactions of Lewis-base noble-metals with vanadium and other acidic transition metals

    SciTech Connect

    Ebbinghaus, B.B.

    1991-05-01

    The noble metals often thought of as unreactive solids,react strongly with nearly 40% of the elements in the periodictable: group IIIB-VB transition metals, lanthanides, theactinides, and group IIIA-IVA non-transition metals. These strong reactions arise from increased bonding/electron transfer fromnonbonding electrons d electron pairs on the noble metal tovacant orbitals on V, etc. This effect is a generalized Lewis acid-base interaction. The partial Gibbs energy of V in the noblemetals has been measured as a function of concentration at a temperature near 1000C. Thermodynamics of the intermetallics are determined by ternary oxide equilibria, ternary carbide equilibria, and the high-temperature galvanic cell technique. These experimental methods use equilibrated solid composite mixtures in which grains of V oxides or of V carbides are interspersed with grains of V-NM(noble-metal) alloys. In equilibrium the activity of V in the oxide or the carbide equals the activity in the alloy. Consequently, the thermodynamics available in the literature for the V oxides and V carbides are reviewed. Test runs on the galvanic cell were attempted. The V oxide electrode reacts with CaF{sub 2}, ThO{sub 2}, YDT(0.85ThO{sub 2}-0.15YO{sub 1.5}), and LDT(0.85ThO{sub 2}- 0.15LaO{sub 1.5}) to interfere with the measured data observed toward the beginning of a galvanic cell experiment are the most accurate. The interaction of vanadium at infinite dilution in the noble-metals was determined.

  16. The strong reactions of Lewis-base noble-metals with vanadium and other acidic transition metals

    SciTech Connect

    Ebbinghaus, B.B.

    1991-05-01

    The noble metals often thought of as unreactive solids,react strongly with nearly 40% of the elements in the periodictable: group IIIB-VB transition metals, lanthanides, theactinides, and group IIIA-IVA non-transition metals. These strong reactions arise from increased bonding/electron transfer fromnonbonding electrons d electron pairs on the noble metal tovacant orbitals on V, etc. This effect is a generalized Lewis acid-base interaction. The partial Gibbs energy of V in the noblemetals has been measured as a function of concentration at a temperature near 1000C. Thermodynamics of the intermetallics are determined by ternary oxide equilibria, ternary carbide equilibria, and the high-temperature galvanic cell technique. These experimental methods use equilibrated solid composite mixtures in which grains of V oxides or of V carbides are interspersed with grains of V-NM(noble-metal) alloys. In equilibrium the activity of V in the oxide or the carbide equals the activity in the alloy. Consequently, the thermodynamics available in the literature for the V oxides and V carbides are reviewed. Test runs on the galvanic cell were attempted. The V oxide electrode reacts with CaF[sub 2], ThO[sub 2], YDT(0.85ThO[sub 2]-0.15YO[sub 1.5]), and LDT(0.85ThO[sub 2]- 0.15LaO[sub 1.5]) to interfere with the measured data observed toward the beginning of a galvanic cell experiment are the most accurate. The interaction of vanadium at infinite dilution in the noble-metals was determined.

  17. He-He and He-metal interactions in transition metals from first-principles

    NASA Astrophysics Data System (ADS)

    Zhang, Pengbo; Zou, Tingting; Zhao, Jijun

    2015-12-01

    We investigated the atomistic mechanism of He-He and He-metal interactions in bcc transition metals (V, Nb, Ta, Cr, Mo, W, and Fe) using first-principles methods. We calculated formation energy and binding energy of He-He pair as function of distance within the host lattices. The strengths of He-He attraction in Cr, Mo, W, and Fe (0.37-1.11 eV) are significantly stronger than those in V, Nb, and Ta (0.06-0.17 eV). Such strong attractions mean that He atoms would spontaneously aggregate inside perfect Cr, Mo, W, and Fe host lattices in absence of defects like vacancies. The most stable configuration of He-He pair is <100> dumbbell in groups VB metals, whereas it adopts close <110> configuration in Cr, Mo, and Fe, and close <111> configuration in W. Overall speaking, the He-He equilibrium distances of 1.51-1.55 Å in the group VIB metals are shorter than 1.65-1.70 Å in the group VB metals. Moreover, the presence of interstitial He significantly facilitates vacancy formation and this effect is more pronounced in the group VIB metals. The present calculations help understand the He-metal/He-He interaction mechanism and make a prediction that He is easier to form He cluster and bubbles in the groups VIB metals and Fe.

  18. Stacking dependent electronic structures of transition metal dichalcogenides heterobilayer

    NASA Astrophysics Data System (ADS)

    Lee, Yea-Lee; Park, Cheol-Hwan; Ihm, Jisoon

    The systematic study of the electronic structures and optical properties of the transition metal dichalcogenides (TMD) heterobilayers can significantly improve the designing of new electronic and optoelectronic devices. Here, we theoretically study the electronic structures and optical properties of TMD heterobilayers using the first-principles methods. The band structures of TMD heterobilayer are shown to be determined by the band alignments of the each layer, the weak interlayer interactions, and angle dependent stacking patterns. The photoluminescence spectra are investigated using the calculated band structures, and the optical absorption spectra are examined by the GW approximations including the electron-hole interaction through the solution of the Bethe-Salpeter equation. It is expected that the weak interlayer interaction gives rise to the substantial interlayer optical transition which will be corresponding to the interlayer exciton.

  19. Holographic metal-insulator transition in higher derivative gravity

    NASA Astrophysics Data System (ADS)

    Ling, Yi; Liu, Peng; Wu, Jian-Pin; Zhou, Zhenhua

    2017-03-01

    We introduce a Weyl term into the Einstein-Maxwell-Axion theory in four dimensional spacetime. Up to the first order of the Weyl coupling parameter γ, we construct charged black brane solutions without translational invariance in a perturbative manner. Among all the holographic frameworks involving higher derivative gravity, we are the first to obtain metal-insulator transitions (MIT) when varying the system parameters at zero temperature. Furthermore, we study the holographic entanglement entropy (HEE) of strip geometry in this model and find that the second order derivative of HEE with respect to the axion parameter exhibits maximization behavior near quantum critical points (QCPs) of MIT. It testifies the conjecture in [1,2] that HEE itself or its derivatives can be used to diagnose quantum phase transition (QPT).

  20. Topological Phase Transition in Metallic Single-Wall Carbon Nanotube

    NASA Astrophysics Data System (ADS)

    Okuyama, Rin; Izumida, Wataru; Eto, Mikio

    2017-01-01

    The topological phase transition is theoretically studied in a metallic single-wall carbon nanotube (SWNT) by applying a magnetic field B parallel to the tube. The Z topological invariant, winding number, is changed discontinuously when a small band gap is closed at a critical value of B, which can be observed as a change in the number of edge states owing to the bulk-edge correspondence. This is confirmed by numerical calculations for finite SWNTs of ˜1 µm length, using a one-dimensional lattice model to effectively describe the mixing between σ and π orbitals and spin-orbit interaction, which are relevant to the formation of the band gap in metallic SWNTs.

  1. Control of plasmonic nanoantennas by reversible metal-insulator transition

    DOE PAGES

    Abate, Yohannes; Marvel, Robert E.; Ziegler, Jed I.; ...

    2015-09-11

    We demonstrate dynamic reversible switching of VO2 insulator-to-metal transition (IMT) locally on the scale of 15 nm or less and control of nanoantennas, observed for the first time in the near-field. Using polarization-selective near-field imaging techniques, we simultaneously monitor the IMT in VO2 and the change of plasmons on gold infrared nanoantennas. Structured nanodomains of the metallic VO2 locally and reversibly transform infrared plasmonic dipole nanoantennas to monopole nanoantennas. Fundamentally, the IMT in VO2 can be triggered on femtosecond timescale to allow ultrafast nanoscale control of optical phenomena. In conclusion, these unique features open up promising novel applications in activemore » nanophotonics.« less

  2. Theoretical study of transition-metal ions bound to benzene

    NASA Technical Reports Server (NTRS)

    Bauschlicher, Charles W., Jr.; Partridge, Harry; Langhoff, Stephen R.

    1992-01-01

    Theoretical binding energies are reported for all first-row and selected second-row transition metal ions (M+) bound to benzene. The calculations employ basis sets of at least double-zeta plus polarization quality and account for electron correlation using the modified coupled-pair functional method. While the bending is predominantly electrostatic, the binding energies are significantly increased by electron correlation, because the donation from the metal d orbitals to the benzene pi* orbitals is not well described at the self-consistent-field level. The uncertainties in the computed binding energies are estimated to be about 5 kcal/mol. Although the calculated and experimental binding energies generally agree to within their combined uncertainties, it is likely that the true binding energies lie in the lower portion of the experimental range. This is supported by the very good agreement between the theoretical and recent experimental binding energies for AgC6H6(+).

  3. Dinuclear transition metal complexes in carbon nanostructured materials synthesis

    NASA Astrophysics Data System (ADS)

    Ayuso, J. I.; Hernández, E.; Delgado, E.

    2013-06-01

    Carbon nanomaterials (CNMs) were prepared with two similar techniques using organometallic complexes as catalysts precursors. Chemical vapour deposition (CVD) and pyrolysis with chlorine gas approaches were employed in order to explore the effect of dinuclear transition metal compounds [Fe2(CO)6(μ-S2C6H2X2), (X=OH, Cl)] in synthesis of CNMs. Our to-date results have shown these complexes generate different carbonaceous materials when they are used in bulk, it was also observed that their performances in synthesis differ even though these compounds are analogous. With X=OH complex used in CVD process, metal nanoparticles of ca. 20-50 nm in size and embedded in carbon matrix were obtained. X=C1 complex has been used in pyrolysis experiments and showed an entire volatilisation or no reaction, depending on selected temperature. Furthermore, obtaining of a new tetranuclear iron cluster is presented in this work.

  4. Dirac cones in transition metal doped boron nitride

    SciTech Connect

    Feng, Min; Cao, Xuewei; Shao, Bin; Zuo, Xu

    2015-05-07

    The transition metal (TM) doped zinc blende boron nitride (c-BN) is studied by using the first principle calculation. TM atoms fill in the interstitials in c-BN and form two-dimensional honeycomb lattice. The generalized gradient approximation and projector augmented wave method are used. The calculated density of states and band structures show that d electrons of TM atoms form impurity bands in the gap of c-BN. When the TM-BN system is in ferromagnetic or non-magnetic state, Dirac cones emerge at the K point in Brillouin zone. When TM is Ti and Co, the Dirac cones are spin polarized and very close to the Fermi level, which makes them promising candidates of Dirac half-metal [H. Ishizuka and Y. Motome, Phys. Rev. Lett. 109, 237207 (2012)]. While TM is Ni and Cu, the system is non-magnetic and Dirac cones located above the Fermi level.

  5. Surface entropy of liquid transition and noble metals

    NASA Astrophysics Data System (ADS)

    Gosh, R. C.; Das, Ramprosad; Sen, Sumon C.; Bhuiyan, G. M.

    2015-07-01

    Surface entropy of liquid transition and noble metals has been investigated using an expression obtained from the hard-sphere (HS) theory of liquid. The expression is developed from the Mayer's extended surface tension formula [Journal of Non-Crystalline Solids 380 (2013) 42-47]. For interionic interaction in metals, Brettonet-Silbert (BS) pseudopotentials and embedded atom method (EAM) potentials have been used. The liquid structure is described by the variational modified hypernetted chain (VMHNC) theory. The essential ingredient of the expression is the temperature dependent effective HS diameter (or packing fraction), which is calculated from the aforementioned potentials together with the VMHNC theory. The obtained results for the surface entropy using the effective HS diameter are found to be good in agreement with the available experimental as well as other theoretical values.

  6. Augmenting Molecular Junctions with Different Transition Metal Contacts

    NASA Astrophysics Data System (ADS)

    Kaur, Rupan Preet; Sawhney, Ravinder Singh; Engles, Derick

    2013-11-01

    In this research paper, the effect of the material of electrodes at the nanometer scale was elucidated towards measuring the electron transport properties of a single molecular junction comprising of anthracenedithiol molecule (ADT) stringed to two semi-infinite metallic electrodes using Extended Huckle Theory (EHT)-based semi-empirical modelling approach. The electron transport parameters i.e., I-V curves, Conductance-Voltage curves and transmission spectrum were investigated through ADT molecule by buffering it between different electrodes composed of rhodium, palladium, nickel and copper, all from transition metals series, under finite bias voltages within Keldysh's non equilibrium green function formulism (NEGF). The simulated results revealed that the copper electrodes showed maximum conduction whereas palladium showed least. The maximum conductance of 0.82 G0 and 43 μA current was exhibited by copper and thus affirmed to be the most effective electrode at nanometre scale when compared with other electrodes viz. nickel, rhodium and palladium.

  7. Synthesis and characterization of some transition metals polymer complexes

    NASA Astrophysics Data System (ADS)

    Masoud, Mamdouh S.; Abdou, Azza E. H.; Ahmed, Wael M.

    2015-09-01

    Co2+, Ni2+, Cu2+, Cr3+, Mn2+ and Fe3+ complexes of Polyacrylamide are prepared and characterized by elemental analyses, IR, UV-Vis spectra, magnetic measurements, and thermal analyses. The data suggests octahedral geometry for all complexes. The thermal behavior of the complexes has been studied applying TG, DTA, and DSC techniques, and the thermodynamic parameters and mechanisms of the decompositions were evaluated. The ΔS# values of the decomposition steps of the metal complexes indicated that the activated fragments have more ordered structure than the undecomposed complexes. The thermal processes proceeded in complicated mechanisms where the bond between the central metal ion and the ligands dissociates after losing 6(C2H5 N) and 6(CO), the metal complexes are ended with metal as a final product. Viscosity and Shale instability using liner swell meter were carried out. Comparisons of the experimental and theoretical IR spectra were also carried out besides some other theoretical calculations.

  8. Trion and Biexciton in Monolayer Transition Metal Dichalcogenides

    NASA Astrophysics Data System (ADS)

    Kezerashvili, Roman Ya; Tsiklauri, Shalva M.

    2017-01-01

    We study the trion and biexciton in transition metal dichalcogenides monolayers within the framework of a nonrelativistic potential model using the method of hyperspherical harmonics (HH). We solve the three- and four-body Schrödinger equations with the Keldysh potential by expanding the wave functions of a trion and biexciton in terms of the antisymmetrized HH. Results of the calculations for the ground state energies are in good agreement with similar calculations for the Keldysh potential and in reasonable agreement with experimental measurements of trion and biexciton binding energies.

  9. Rare earth-transition metal scrap treatment method

    DOEpatents

    Schmidt, F.A.; Peterson, D.T.; Wheelock, J.T.; Jones, L.L.; Lincoln, L.P.

    1992-02-11

    Rare earth-transition metal (e.g. iron) scrap (e.g. Nd-Fe-B scrap) is melted to reduce the levels of tramp oxygen and nitrogen impurities therein. The tramp impurities are reduced in the melt by virtue of the reaction of the tramp impurities and the rare earth to form dross on the melt. The purified melt is separated from the dross for reuse. The oxygen and nitrogen of the melt are reduced to levels acceptable for reuse of the treated alloy in the manufacture of end-use articles, such as permanent magnets. 3 figs.

  10. First-principles study of transition metal carbides

    NASA Astrophysics Data System (ADS)

    Connétable, Damien

    2016-12-01

    This study investigates the physical properties of transition metal carbides compounds associated with the Nb-C, Ti-C, Mo-C and W-C alloys systems using first-principles calculations. The ground-state properties (lattice parameters, cohesive energies and magnetism) were analyzed and compared to the experimental and theoretical literature. The simulations are in excellent agreement with experimental findings concerning atomic positions and structures. Elastic properties, computed using a finite-differences approach, are then discussed in detail. To complete the work, their lattice dynamics properties (phonon spectra) were investigated. These results serve to establish that some structures, which are mechanically stable, are dynamically unstable.

  11. Flexible Transition Metal Oxide Electronics and Imprint Lithography

    NASA Astrophysics Data System (ADS)

    Jackson, Warren B.

    The previous chapters have discussed inorganic low-deposition temperature materials suitable for flexible applications, such as amorphous and nano-crystalline-silicon (Si) and organic conductors. This chapter presents the results of a recently developed inorganic low-temperature materials system, transition metal oxides (TMOs), that appears to be a very promising, new high-performance flexible electronic materials system. An equally, if not more, important part of this chapter, is the presentation of self-aligned imprint lithography (SAIL) a new fabrication method for flexible substrates that solves the layer-to-layer alignment problem.

  12. Optical Control of Spin Polarization in Monolayer Transition Metal Dichalcogenides.

    PubMed

    Chen, Xi; Yan, Tengfei; Zhu, Bairen; Yang, Siyuan; Cui, Xiaodong

    2017-02-28

    Optical excitation could generate electrons' spin polarization in some semiconductors with the control of the field polarization. In this article, we report a series of spin-resolved photocurrent experiments on monolayer tungsten disulfide. The experiments demonstrate that the optical excitations with the same helicity could generate opposite spin polarization around the Fermi level by tuning the excitation energy. The mechanism lies in the valley-dependent optical selection rules, the giant spin-orbit coupling, and spin-valley locking in monolayer transition metal dichalcogenides (TMDs). These exotic features make monolayer TMDs promising candidates for conceptual semiconductor-based spintronics.

  13. Rare earth-transition metal scrap treatment method

    DOEpatents

    Schmidt, Frederick A.; Peterson, David T.; Wheelock, John T.; Jones, Lawrence L.; Lincoln, Lanny P.

    1992-02-11

    Rare earth-transition metal (e.g. iron) scrap (e.g. Nd-Fe-B scrap) is melted to reduce the levels of tramp oxygen and nitrogen impurities therein. The tramp impurities are reduced in the melt by virtue of the reaction of the tramp impurities and the rare earth to form dross on the melt. The purified melt is separated from the dross for reuse. The oxygen and nitrogen of the melt are reduced to levels acceptable for reuse of the treated alloy in the manufacture of end-use articles, such as permanent magnets.

  14. A simple, general route to 2-pyridylidene transition metal complexes.

    PubMed

    Roselló-Merino, Marta; Díez, Josefina; Conejero, Salvador

    2010-12-28

    Pyridinium 2-carboxylates decompose thermally in the presence of a variety of late transition metal precursors to yield the corresponding 2-pyridylidene-like complexes. The mild reaction conditions and structural diversity that can be generated in the heterocyclic ring make this method an attractive alternative for the synthesis of 2-pyridylidene complexes. IR spectra of the Ir(i) carbonyl compounds [IrCl(NHC)(CO)(2)] indicate that these N-heterocyclic carbene ligands are among the strongest σ-electron donors.

  15. Synthesis, structure and physical properties of selected transition metal oxides

    NASA Astrophysics Data System (ADS)

    Waldron, Joanna Elizabeth Leah

    Monoclinic Nb12O29 has been synthesised by topotactic reduction of H-Nb2O5. It has a complex crystallographic shear structure made up of 3x4 blocks of corner shared NbO6 octahedra. Nb12O29 is mixed d0/d1 compound which, can be written as Nb4+2NB5+10O29. It has been found, using Rietveld refinement of powder neutron diffraction data, to undergo a charge ordering transition at around 12K resulting in a lowering of symmetry from A2/m to Am. Below this transition, one Nb4+ ion is localised on a crystallographically distinct site in the centre of the 3x4 blocks. This charge ordering transition has an associated transition to an incommensurate one dimensional antiferromagnetic state. The nature of the magnetic order has been investigated using susceptibility and SR measurements. Susceptibility measurements reveal that only 48% of the Nb4+ in the system is localised, and its temperature dependence is well fitted to a Bonner-Fisher model for S=1/2 one dimensional antiferromagnets. It is found that the remaining valence electrons in NB12O29 itinerant and contribute to its metallic conductivity. Further evidence for the unique properties of monoclinic Nb12O29 has been obtained by doping the structure with small amounts of diamagnetic Ti4+, which rapidly causes a destruction of the long range magnetic order at only 3% doping, but leaves the metallic conductivity unaffected, as is expected for a one dimensional chain.

  16. A piggyback ride for transition metals: encapsulation of exohedral metallofullerenes in carbon nanotubes.

    PubMed

    Chamberlain, Thomas W; Champness, Neil R; Schröder, Martin; Khlobystov, Andrei N

    2011-01-10

    We have developed a method that enables the efficient insertion of transition-metal atoms and their small clusters into carbon nanotubes. As a model system, Os complexes attached to the exterior of fullerene C60 (exohedral metallofullerenes) were shown to be dragged into the nanotube spontaneously and irreversibly due to strong van der Waals interactions, specific to fullerenes and carbon nanotubes. The size of the metal-containing groups attached to C60 was shown to be critical for successful insertion, as functional groups too bulky to enter the nanotube were stripped off the fullerene during the encapsulation process. Once inside the nanotube, Os atoms catalyse polymerisation and decomposition of fullerene cages, which is related to a much higher catalytic activity of metal atoms situated on the surface of the fullerene cage, as compared to metal atoms in endohedral fullerenes, such as M@C82. Thus, exohedral metallofullerenes show promise for applications in catalysis in carbon “nano” test tubes.

  17. The involvement of transition metal ions on iron-dependent lipid peroxidation.

    PubMed

    Repetto, Marisa G; Ferrarotti, Nidia F; Boveris, Alberto

    2010-04-01

    The metals iron (Fe) and copper (Cu) are considered trace elements, and the metals cobalt (Co) and nickel (Ni) are known as ultra-trace elements, considering their presence in low to very low quantity in humans. The biologic activity of these transition metals is associated with the presence of unpaired electrons that favor their participation in redox reactions. They are part of important enzymes involved in vital biologic processes. However, these transition metals become toxic to cells when they reach elevated tissue concentrations and produce cellular oxidative damage. Phospholipid liposomes (0.5 mg/ml, phosphatidylcholine (PC)/phosphatidylserine (PS), 60/40) were incubated for 60 min at 37 degrees C with 25 microM of Fe2+ in the absence and in the presence of Cu2+, Co2+, and Ni2+ (0-100 microM) with and without the addition of hydrogen peroxide (H2O2, 5-50 microM). Iron-dependent lipid peroxidation in PC/PS liposomes was assessed by thiobarbituric acid-reactive substances (TBARS) production. Metal transition ions promoted lipid peroxidation by H2O2 decomposition and direct homolysis of endogenous hydroperoxides. The Fe2+-H2O2-mediated lipid peroxidation takes place by a pseudo-second order process, and the Cu2+-mediated process by a pseudo-first order reaction. Co2+ and Ni2+ alone do not induce lipid peroxidation. Nevertheless, when they are combined with Fe2+, Fe2+-H2O2-mediated lipid peroxidation was stimulated in the presence of Ni2+ and was inhibited in the presence of Co2+. The understanding of the effects of transition metal ions on phospholipids is relevant to the prevention of oxidative damage in biologic systems.

  18. Dynamical conductivity at the dirty superconductor-metal quantum phase transition

    NASA Astrophysics Data System (ADS)

    Hoyos, J. A.; Del Maestro, Adrian; Rosenow, Bernd; Vojta, Thomas

    2011-03-01

    We study the transport properties of ultrathin disordered nanowires in the neighborhood of the superconductor-metal quantum phase transition. To this end we combine numerical calculations with analytical strong-disorder renormalization group results. The quantum critical conductivity at zero temperature diverges logarithmically as a function of frequency. In the metallic phase, it obeys activated scaling associated with an infinite-randomness quantum critical point. We extend the scaling theory to higher dimensions and discuss implications for experiments. Financial support: Fapesp, CNPq, NSF, and Research Corporation.

  19. Transition-metal-free direct alkylation of aryl tetrazoles via intermolecular oxidative C-N formation.

    PubMed

    Wang, Liang; Zhu, Kaiqiang; Chen, Qun; He, Mingyang

    2014-12-05

    A transition-metal-free synthetic approach for constructing alkylated aryl tetrazoles has been developed using n-Bu4NI as the catalyst and t-BuOOH as the oxidant. It involves the direct C-N bond formation through sp(3) C-H activation. A wide range of benzylic C-H substrates (or alkyl ethers) and aryl tetrazoles undergo this reaction smoothly to deliver the corresponding products in good yields.

  20. Origin of Transitions between Metallic and Insulating States in Simple Metals

    DOE PAGES

    Naumov, Ivan I.; Hemley, Russell J.

    2015-04-17

    Unifying principles that underlie recently discovered transitions between metallic and insulating states in elemental solids under pressure are developed. Using group theory arguments and first principles calculations, we show that the electronic properties of the phases involved in these transitions are controlled by symmetry principles not previously recognized. The valence bands in these systems are described by simple and composite band representations constructed from localized Wannier functions centered on points unoccupied by atoms, and which are not necessarily all symmetrical. The character of the Wannier functions is closely related to the degree of s-p(-d) hybridization and reflects multi-center chemical bondingmore » in these insulating states. The conditions under which an insulating state is allowed for structures having an integer number of atoms per primitive unit cell as well as re-entrant (i.e., metal-insulator-metal) transition sequences are detailed, resulting in predictions of novel behavior such as phases having three-dimensional Dirac-like points. The general principles developed are tested and applied to the alkali and alkaline earth metals, including elements where high-pressure insulating phases have been identified or reported (e.g., Li, Na, and Ca).« less

  1. Origin of Transitions between Metallic and Insulating States in Simple Metals

    SciTech Connect

    Naumov, Ivan I.; Hemley, Russell J.

    2015-04-17

    Unifying principles that underlie recently discovered transitions between metallic and insulating states in elemental solids under pressure are developed. Using group theory arguments and first principles calculations, we show that the electronic properties of the phases involved in these transitions are controlled by symmetry principles not previously recognized. The valence bands in these systems are described by simple and composite band representations constructed from localized Wannier functions centered on points unoccupied by atoms, and which are not necessarily all symmetrical. The character of the Wannier functions is closely related to the degree of s-p(-d) hybridization and reflects multi-center chemical bonding in these insulating states. The conditions under which an insulating state is allowed for structures having an integer number of atoms per primitive unit cell as well as re-entrant (i.e., metal-insulator-metal) transition sequences are detailed, resulting in predictions of novel behavior such as phases having three-dimensional Dirac-like points. The general principles developed are tested and applied to the alkali and alkaline earth metals, including elements where high-pressure insulating phases have been identified or reported (e.g., Li, Na, and Ca).

  2. Origin of Transitions between Metallic and Insulating States in Simple Metals.

    PubMed

    Naumov, Ivan I; Hemley, Russell J

    2015-04-17

    Unifying principles that underlie recently discovered transitions between metallic and insulating states in elemental solids under pressure are developed. Using group theory arguments and first-principles calculations, we show that the electronic properties of the phases involved in these transitions are controlled by symmetry principles. The valence bands in these systems are described by simple and composite band representations constructed from localized Wannier functions centered on points unoccupied by atoms, and which are not necessarily all symmetrical. The character of the Wannier functions is closely related to the degree of s-p(-d) hybridization and reflects multicenter chemical bonding in these insulating states. The conditions under which an insulating state is allowed for structures having an integer number of atoms per primitive unit cell as well as reentrant (i.e., metal-insulator-metal) transition sequences are detailed, resulting in predictions of behavior such as phases having band-contact lines. The general principles developed are tested and applied to the alkali and alkaline earth metals, including elements where high-pressure insulating phases have been reported (e.g., Li, Na, and Ca).

  3. Catalytic effect of transition metals on microwave-induced degradation of atrazine in mineral micropores.

    PubMed

    Hu, Erdan; Cheng, Hefa

    2014-06-15

    With their high catalytic activity for redox reactions, transition metal ions (Cu(2+) and Fe(3+)) were exchanged into the micropores of dealuminated Y zeolites to prepare effective microporous mineral sorbents for sorption and microwave-induced degradation of atrazine. Due to its ability to complex with atrazine, loading of copper greatly increased the sorption of atrazine. Atrazine sorption on iron-exchanged zeolites was also significantly enhanced, which was attributed to the hydrolysis of Fe(3+) polycations in mineral micropores and electrostatic interactions of protonated atrazine molecules with the negatively charged pore wall surface. Copper and iron species in the micropores also significantly accelerated degradation of the sorbed atrazine (and its degradation intermediates) under microwave irradiation. The catalytic effect was attributed to the easy reducibility and high oxidation activity of Cu(2+) and Fe(3+) species stabilized in the micropores of the zeolites. It was postulated that the surface species of transition metals (monomeric Cu(2+), Cu(2+)-O-Cu(2+) complexes, FeO(+), and dinuclear Fe-O-Fe-like species) in the mineral micropores were thermally activated under microwave irradiation, and subsequently formed highly reactive sites catalyzing oxidative degradation of atrazine. The transition metal-exchanged zeolites, particularly the iron-exchanged ones, were relatively stable when leached under acidic conditions, which suggests that they are reusable in sorption and microwave-induced degradation. These findings offer valuable insights on designing of effective mineral sorbents that can selectively uptake atrazine from aqueous solutions and catalyze its degradation under microwave irradiation.

  4. Relation Between Higher Physical Activity and Public Transit Use

    PubMed Central

    Vernez Moudon, Anne; Kang, Bumjoon; Hurvitz, Philip M.; Zhou, Chuan

    2014-01-01

    Objectives. We isolated physical activity attributable to transit use to examine issues of substitution between types of physical activity and potential confounding of transit-related walking with other walking. Methods. Physical activity and transit use data were collected in 2008 to 2009 from 693 Travel Assessment and Community study participants from King County, Washington, equipped with an accelerometer, a portable Global Positioning System, and a 7-day travel log. Physical activity was classified into transit- and non–transit-related walking and nonwalking time. Analyses compared physical activity by type between transit users and nonusers, between less and more frequent transit users, and between transit and nontransit days for transit users. Results. Transit users had more daily overall physical activity and more total walking than did nontransit users but did not differ on either non–transit-related walking or nonwalking physical activity. Most frequent transit users had more walking time than least frequent transit users. Higher physical activity levels for transit users were observed only on transit days, with 14.6 minutes (12.4 minutes when adjusted for demographics) of daily physical activity directly linked with transit use. Conclusions. Because transit use was directly related to higher physical activity, future research should examine whether substantive increases in transit access and use lead to more physical activity and related health improvements. PMID:24625142

  5. Selective transformations of cyclopentadienyl ligands of transition-metal and rare-earth metal complexes.

    PubMed

    Liu, Ruiting; Zhou, Xigeng

    2013-04-21

    Cyclopentadienyl and substituted cyclopentadienyl ligands are observed in a wide range of organometallic complexes. In addition to serving as ancillary ligands, these ligands have come into their own as intermediates in organometallic reactions, and shown many unique reaction modes involving ring C-H, C-C and C=C bond cleavages. This feature article summarizes the progressive development of cyclopentadienyl-based reactions of metallocene complexes of transition metals and rare-earth metals, with the aim of further developing the fundamental modes of reactivity of such systems together with their synthetic applications.

  6. Magnetism In 3d Transition Metals at High Pressures

    SciTech Connect

    Iota, V

    2006-02-09

    This research project examined the changes in electronic and magnetic properties of transition metals and oxides under applied pressures, focusing on complex relationship between magnetism and phase stability in these correlated electron systems. As part of this LDRD project, we developed new measurement techniques and adapted synchrotron-based electronic and magnetic measurements for use in the diamond anvil cell. We have performed state-of-the-art X-ray spectroscopy experiments at the dedicated high-pressure beamline HP-CAT (Sector 16 Advanced Photon Source, Argonne National Laboratory), maintained in collaboration with of University of Nevada, Las Vegas and Geophysical Laboratory of The Carnegie Institution of Washington. Using these advanced measurements, we determined the evolution of the magnetic order in the ferromagnetic 3d transition metals (Fe, Co and Ni) under pressure, and found that at high densities, 3d band broadening results in diminished long range magnetic coupling. Our experiments have allowed us to paint a unified picture of the effects of pressure on the evolution of magnetic spin in 3d electron systems. The technical and scientific advances made during this LDRD project have been reported at a number of scientific meetings and conferences, and have been submitted for publication in technical journals. Both the technical advances and the physical understanding of correlated systems derived from this LDRD are being applied to research on the 4f and 5f electron systems under pressure.

  7. Defects and ferromagnetism in transition metal doped zinc oxide

    NASA Astrophysics Data System (ADS)

    Thapa, Sunil

    Transition metal doped zinc oxide has been studied recently due to its potential application in spintronic devices. The magnetic semiconductor, often called Diluted Magnetic Semiconductors (DMS), has the ability to incorporate both charge and spin into a single formalism. Despite a large number of studies on ferromagnetism in ZnO based DMS and the realization of its room temperature ferromagnetism, there is still a debate about the origin of the ferromagnetism. In this work, the synthesis and characterization of transition metal doped zinc oxide have been carried out. The sol-gel method was used to synthesize thin films, and they were subsequently annealed in air. Characterization of doped zinc oxide films was carried out using the UV-visible range spectrometer, scanning electron microscopy, superconducting quantum interference device (SQUID), x-ray diffraction(XRD) and positron annihilation spectroscopy. Hysteresis loops were obtained for copper and manganese doped zinc oxide, but a reversed hysteresis loop was observed for 2% Al 3% Co doped zinc oxide. The reversed hysteresis loop has been explained using a two-layer model.

  8. Nanostructured transition metal oxides for energy storage and conversion

    NASA Astrophysics Data System (ADS)

    Li, Qiang

    Lithium-ion batteries, supercapacitors and photovoltaic devices have been widely considered as the three major promising alternatives of fossil fuels facing upcoming depletion to power the 21th century. The conventional film configuration of electrochemical electrodes hardly fulfills the high energy and efficiency requirements because heavy electroactive material deposition restricts ion diffusion path, and lowers power density and fault tolerance. In this thesis, I demonstrate that novel nanoarchitectured transition metal oxides (TMOs), e.g. MnO2, V2O 5, and ZnO, and their relevant nanocomposites were designed, fabricated and assembled into devices to deliver superior electrochemical performances such as high energy and power densities, and rate capacity. These improvements could be attributed to the significant enhancement of surface area, shortened ion diffusion distances and facile penetration of electrolyte solution into open structures of networks as well as to the pseudocapacitance domination. The utilization of ForcespinningRTM, a newly developed nanofiber processing technology, for large-scale energy storage and conversion applications is emphasized. This process simplifies the tedious multi-step hybridization synthesis and facilitates the contradiction between the micro-batch production and the ease of large-scale manufacturing. Key Words: Transition metal oxides, energy storage and conversion, ForcespinningRTM, pseudocapacitance domination, high rate capacity

  9. Effects of interband transitions on Faraday rotation in metallic nanoparticles.

    PubMed

    Wysin, G M; Chikan, Viktor; Young, Nathan; Dani, Raj Kumar

    2013-08-14

    The Faraday rotation in metallic nanoparticles is considered based on a quantum model for the dielectric function ϵ(ω) in the presence of a DC magnetic field B. We focus on effects in ϵ(ω) due to interband transitions (IBTs), which are important in the blue and ultraviolet for noble metals used in plasmonics. The dielectric function is found using the perturbation of the electron density matrix due to the optical field of the incident electromagnetic radiation. The calculation is applied to transitions between two bands (d and p, for example) separated by a gap, as one finds in gold at the L-point of the Fermi surface. The result of the DC magnetic field is a shift in the effective optical frequency causing IBTs by ±μBB/ħ, where opposite signs are associated with left/right circular polarizations. The Faraday rotation for a dilute solution of 17 nm diameter gold nanoparticles is measured and compared with both the IBT theory and a simpler Drude model for the bound electron response. Effects of the plasmon resonance mode on Faraday rotation in nanoparticles are also discussed.

  10. Anderson metal-insulator transitions with classical magnetic impurities

    SciTech Connect

    Jung, Daniel; Kettemann, Stefan

    2014-08-20

    We study the effects of classical magnetic impurities on the Anderson metal-insulator transition (AMIT) numerically. In particular we find that while a finite concentration of Ising impurities lowers the critical value of the site-diagonal disorder amplitude W{sub c}, in the presence of Heisenberg impurities, W{sub c} is first increased with increasing exchange coupling strength J due to time-reversal symmetry breaking. The resulting scaling with J is compared to analytical predictions by Wegner [1]. The results are obtained numerically, based on a finite-size scaling procedure for the typical density of states [2], which is the geometric average of the local density of states. The latter can efficiently be calculated using the kernel polynomial method [3]. Although still suffering from methodical shortcomings, our method proves to deliver results close to established results for the orthogonal symmetry class [4]. We extend previous approaches [5] by combining the KPM with a finite-size scaling analysis. We also discuss the relevance of our findings for systems like phosphor-doped silicon (Si:P), which are known to exhibit a quantum phase transition from metal to insulator driven by the interplay of both interaction and disorder, accompanied by the presence of a finite concentration of magnetic moments [6].

  11. Wannier function analysis of charge states in transition metal oxides

    NASA Astrophysics Data System (ADS)

    Quan, Yundi; Pickett, Warren

    2015-03-01

    The charge (or oxidation) state of a cation has been a crucial concept in analyzing the electronic and magnetic properties of oxides as well as interpreting ``charge ordering'' metal-insulator transitions. In recent years a few methods have been proposed for the objective identification of charge states, beyond the conventional (and occasionally subjective) use of projected densities of states, weighted band structures (fatbands), and Born effective charges. In the past two decades Wannier functions (WFs) and particularly maximally localized WFs (MLWFs), have become an indispensable tool for several different purposes in electronic structure studies. These developments have motivated us to explore the charge state picture from the perspective of MLWFs. We will illustrate with a few transition metal oxide examples such as AgO and YNiO3 that the shape, extent, and location of the charge centers of the MLWFs provide insights into how cation-oxygen hybridization determines chemical bonding, charge distribution, and ``charge ordering.'' DOE DE-FG02-04ER46111.

  12. Quantum Monte Carlo Calculations of Transition Metal Oxides

    NASA Astrophysics Data System (ADS)

    Wagner, Lucas

    2006-03-01

    Quantum Monte Carlo is a powerful computational tool to study correlated systems, allowing us to explicitly treat many-body interactions with favorable scaling in the number of particles. It has been regarded as a benchmark tool for first and second row condensed matter systems, although its accuracy has not been thoroughly investigated in strongly correlated transition metal oxides. QMC has also historically suffered from the mixed estimator error in operators that do not commute with the Hamiltonian and from stochastic uncertainty, which make small energy differences unattainable. Using the Reptation Monte Carlo algorithm of Moroni and Baroni(along with contributions from others), we have developed a QMC framework that makes these previously unavailable quantities computationally feasible for systems of hundreds of electrons in a controlled and consistent way, and apply this framework to transition metal oxides. We compare these results with traditional mean-field results like the LDA and with experiment where available, focusing in particular on the polarization and lattice constants in a few interesting ferroelectric materials. This work was performed in collaboration with Lubos Mitas and Jeffrey Grossman.

  13. Antimicrobial activity of the metals and metal oxide nanoparticles.

    PubMed

    Dizaj, Solmaz Maleki; Lotfipour, Farzaneh; Barzegar-Jalali, Mohammad; Zarrintan, Mohammad Hossein; Adibkia, Khosro

    2014-11-01

    The ever increasing resistance of pathogens towards antibiotics has caused serious health problems in the recent years. It has been shown that by combining modern technologies such as nanotechnology and material science with intrinsic antimicrobial activity of the metals, novel applications for these substances could be identified. According to the reports, metal and metal oxide nanoparticles represent a group of materials which were investigated in respect to their antimicrobial effects. In the present review, we focused on the recent research works concerning antimicrobial activity of metal and metal oxide nanoparticles together with their mechanism of action. Reviewed literature indicated that the particle size was the essential parameter which determined the antimicrobial effectiveness of the metal nanoparticles. Combination therapy with the metal nanoparticles might be one of the possible strategies to overcome the current bacterial resistance to the antibacterial agents. However, further studies should be performed to minimize the toxicity of metal and metal oxide nanoparticles to apply as proper alternatives for antibiotics and disinfectants especially in biomedical applications.

  14. Activation and cleavage of the N-N bond in side-on bound [L₂M-NN-ML₂] (L = NH₂, NMe₂, N(i)Pr₂, C₅H₅, C₅Me₄H) dinitrogen complexes of transition metals from groups 4 through 9.

    PubMed

    Cavigliasso, Germán; Wilson, Laurence; McAlpine, Sarlae; Attar, Mariam; Stranger, Robert; Yates, Brian F

    2010-05-21

    The activation and cleavage of the N-N bond in side-on bound [L₂M-NN-ML₂] (L = NH₂, NMe₂, N(i)Pr₂, C₅H₅, C₅Me₄H) dinitrogen complexes of transition metals in groups 4 through 9 have been investigated using density functional theory. Emphasis has been placed on Ti, Zr, and Hf (group 4) complexes due to their experimental relevance. Calculations on these species have shown that for cases when the structural configuration corresponds to the terminal [ML₂] fragments adopting a perpendicular orientation with respect to the central [N-N] unit, a considerably higher degree of N-N activation is predicted relative to that observed in the experimentally characterized cyclopentadienyl analogues and in related systems involving end-on dinitrogen coordination. An examination of the orbital interactions between the metal-based fragments and the dinitrogen unit shows that both σ and π bonding are important in the side-on binding mode, in contrast to the end-on mode where metal-nitrogen π interactions are dominant. This analysis also reveals that the model amide systems possess the orbital properties identified as necessary for successful N-N hydrogenation. A significant result obtained for the amide complexes containing metals from groups 5 (V, Nb, Ta), 6 (Cr, Mo, W), and 7 (Mn, Tc, Re), is the presence of metal-metal bonding in configurations that are considerably distorted from planarity. As a consequence, these complexes exhibit strongly enhanced stability relative to species where metal-metal bonding is absent. In contrast, the d² metal-based configurations in the group 4 complexes of Ti, Zr, and Hf are unable to provide the six electrons required for complete reductive cleavage of the dinitrogen unit which is necessary to allow the metal centres to approach one another sufficiently for metal-metal bond formation.

  15. Transition metal catalysis in the generation of petroleum: A genetic anomaly in Ordovician oils

    SciTech Connect

    Mango, F.D. )

    1992-10-01

    The transition metals, captured from sedimentary waters by chlorophyll, have been proposed as the catalytic agents that convert n-alkane biolipids into the rearranged light hydrocarbons in petroleum. Certain ancient oils (Ordovician) display a depletion in chlorophyll, suggesting that they may have been derived from sedimentary rocks also depleted in transition metals. These oils show anomalously high concentrations of n-heptane relative to their respective rearranged isoalkane and cycloalkane products. This extraordinary enrichment in light n-alkanes appears unique to the chlorophyll-deficient Ordovician oils. The high concentrations of n-heptane may have resulted from the thermal cracking of higher n-alkanes, which are known to be dominant components of the kerogenous precursors to the Ordovician oils. However, the methylhexanes, which have no thermolytic precursors enriched in the kerogenous source, show a proportionate increase in concentration. The contention, therefore, that thermal cracking might explain the n-heptane anomaly is untenable since a kerogenous starting material enriched in n-alkanes and depleted in isoalkanes cannot reasonably crack to a light hydrocarbon product enriched in both n-alkanes and isoalkanes. According to a postulated catalytic cycle, n-alkane and isoalkane concentrations are controlled by the relative rates of two divergent pathways. If the various transition metals that may catalyze these reactions differ in activity, then a unique distribution of metals created by a chlorophyll deficiency could explain the Ordovician anomaly.

  16. Plasma-enhanced deposition and processing of transition metals and transition metal silicides for VLSI

    NASA Astrophysics Data System (ADS)

    Hess, D. W.

    1986-05-01

    Radiofrequency (rf) discharges have been used to deposit films of tungsten, molybdenum and titanium silicide. As-deposited tungsten films, from tungsten hexafluoride and hydrogen source gases, were metastable (beta W), with significant (>1 atomic percent) fluorine incorporation. Film resistivities were 40-55 micro ohm - cm due to the beta W, but dropped to about 8 micro ohm cm after a short heat treatment at 700 C which resulted in a phase transition to alpha W (bcc form). The high resistivity (>10,000 micro ohm) associated with molybdenum films deposited from molybdenum hexafluoride and hydrogen appeared to be a result of the formation of molybdenum trifluoride in the deposited material. Titanium silicide films formed from a discharge of titanium tetrachloride, silane, and hydrogen, displayed resistivities of about 150 micro ohm cm, due to small amounts of oxygen and chlorine incorporated during deposition. Plasma etching studies of tungsten films with fluorine containing gases suggest that the etchant species for tungsten in these discharges are fluorine atoms.

  17. Temperature dependent conduction and UV induced metal-to-insulator transition in ZnO nanowires

    SciTech Connect

    Chang, P.-C.; Lu, Jia Grace

    2008-05-26

    Thin ZnO nanowires with diameters of less than 50 nm are configured as field effect transistors and studied for their transport mechanisms at different temperatures under UV illumination and gate modulation. The conductivity exhibits two regimes: at T>50 K, thermally activated transport dominates with activation energy around 30-60 meV attributed to the shallow donor states and at T<50 K, three dimensional variable range hopping reveals in the conduction. In addition, UV irradiation leads to a metal-to-insulator transition at {approx}210 K. Furthermore, electrostatic gating results in a band bending giving rise to a change in the activation energy.

  18. Materials with intermediate valence ; a comparison with transition metals

    NASA Astrophysics Data System (ADS)

    Mott, N. F.

    A discussion of metallic intermediate valence materials is given, particularly of hybridisation between the 4f and the conduction band δ. If n, 1 - n are the numbers of ions in each of two charge states, the variation of n with temperature is described. Resistivity is ascribed to scattering of the conduction electrons into the 4f band. The mechanism is compared with that in transition metals and their alloys, particularly Pd1-xAg x. The resistivity can be very large, of order of the Ioffe-Regel value 1/3 e2/ħa. It is argued that both here and in metallic alloys, this can only occur with a two-band model. At high temperatures there is some evidence that s-f scattering does not occur. On discute des matériaux métalliques à valence intermédiaire, en particulier de l'hybridation entre la bande 4f et la bande de conduction. Notant n et 1 - n les nombres d'ions dans chacun des deux états de charge, on décrit la variation de n avec la température. Le mécanisme est comparé avec celui des métaux de transition et de leurs alliages, particulièrement Pd1-xAg x. La résistivité peut être très grande, de l'ordre de la valeur de Ioffe-Regel 1/3 e2/ħa. On donne des arguments tendant à prouver que ceci ne peut se produire que dans le cadre d'un modèle à 2 bandes. Il y a des évidences qu'à haute température la diffusion s-f n'a pas lieu.

  19. Quantum phase transitions in ultrathin films of metal

    NASA Astrophysics Data System (ADS)

    Mack, Anthony Michael

    1997-11-01

    Conductance measurements of ultrathin films of amorphous bismuth are presented. The measurements were performed at temperatures down to 0.15K as a function of temperature and film thickness. Such films are known to become superconducting when the conductance reaches ˜4esp2/h. Careful analysis of the insulating state reveals a crossover near esp2/h, with hopping conduction below and weak localization above. A corresponding change in behavior is also evident in plots of G vs. d at esp2/h. A crossover conductance, Gsbcr ˜ (30 ± 1kOmega)sp{-1}, was extracted by examining the derivative of the G vs. d curves. A scaling analysis is performed yielding an excellent collapse of the data with critical exponents nu z = 6.9 ± 0.7. Ultrathin films of Pd (which is not superconducting) also show a crossover, but at Gsbcr ˜ (56 ± 6kOmega)sp{-1}. The Bi and Pd data sets are collapsed together onto the same curve yielding nu z = 7.2 ± 1.0 for Pd. The success of the scaling analysis supports the view that the crossover is the finite temperature signature of a quantum phase transition occurring at T = 0. The transition is between phases identified as (weakly localized) metal and insulator, which may make this the first observation of a metal-insulator transition in a two-dimensional system. The scaling analysis developed for the crossover at esp2/h was applied to the superconductor-insulator transition as well. While the collapse of the data is poor, the analysis yields a single value of the critical exponent nu z = 1.99 ± 0.09. A previous analysis yielded two separate (and inconsistent) values of nu z on the insulating and superconducting sides. The analysis was also applied to the case of the field-driven superconductor-insulator transition. The resulting collapse is excellent yielding a critical exponent nu z = 0.637 ± 0.010. The scaling parameter deviates from a power law in T above 0.7K. Since the data presented only extends down to 0.5K, the critical region accessed is

  20. Supported transition metal nanomaterials: Nanocomposites synthesized by ionizing radiation

    NASA Astrophysics Data System (ADS)

    Clifford, D. M.; Castano, C. E.; Rojas, J. V.

    2017-03-01

    Nanostructures decorated with transition metal nanoparticles using ionizing radiation as a synthesis method in aqueous solutions represents a clean alternative to existing physical, chemical and physicochemical methods. Gamma irradiation of aqueous solutions generates free radicals, both oxidizing and reducing species, all distributed homogeneously. The presence of oxidant scavengers in situ during irradiation generates a highly reductive environment favoring the reduction of the metal precursors promoting seed formation and nanoparticle growth. Particle growth is controlled by addition of surfactants, polymers or various substrates, otherwise referred to as supports, which enhance the formation of well dispersed nanoparticles. Furthermore, the combination of nanoparticles with supports can offer desirable synergisms not solely presented by the substrate or nanoparticles. Thus, supported nanoparticles offer a huge diversity of applications. Among the ionizing radiation methods to synthesize nanomaterials and modify their characteristics, gamma irradiation is of growing interest and it has shown tremendous potential in morphological control and distribution of particle size by judiciously varying parameters including absorbed dose, dose rate, concentration of metal precursor, and stabilizing agents. In this work, major advances on the synthesis of supported nanoparticles through gamma irradiation are reviewed as well as the opportunities to develop and exploit new composites using gamma-rays and other accessible ionizing radiation sources such as X-rays.

  1. Metal-insulator transition in a switchable mirror

    NASA Astrophysics Data System (ADS)

    Roy, Arunabha Shasanka

    2001-11-01

    Rare earth hydride films can be converted reversibly from metallic mirrors to insulating windows simply by changing the surrounding hydrogen gas pressure at room temperature. At low temperatures, in situ doping is not possible in this way as hydrogen cannot diffuse. However, our finding of persistent photoconductivity under ultraviolet illumination enables us to tune yttrium hydride through the T = 0 metal-insulator transition. Conductivity and Hall measurements are used to determine the critical exponents in this system: mu = 1.0 +/- 0.1 and zv = 6.0 +/- 0.5. The simultaneous validity of finite-size scaling in the metal and its failure in the insulator motivates a study of the insulating phase of YHx in greater detail. A new transport regime is discovered which is consistent with our earlier determined values for the critical exponents but entails a new scaling dependence of the conductivity on the carrier density n and temperature T. The unusually large value for the product of the static and dynamic critical exponents appears to signify the important role played by electron-electron interactions in this system. Finally, possible schemes for the mechanism underlying the unusual photoconductivity are discussed.

  2. Discovery of elusive structures of multifunctional transition-metal borides

    NASA Astrophysics Data System (ADS)

    Liang, Yongcheng; Wu, Zhaobing; Yuan, Xun; Zhang, Wenqing; Zhang, Peihong

    2015-12-01

    A definitive determination of crystal structures is an important prerequisite for designing and exploiting new functional materials. Even though tungsten and molybdenum borides (TMBx) are the prototype for transition-metal light-element compounds with multiple functionalities, their elusive crystal structures have puzzled scientists for decades. Here, we discover that the long-assumed TMB2 phases with the simple hP3 structure (hP3-TMB2) are in fact a family of complex TMB3 polytypes with a nanoscale ordering along the axial direction. Compared with the energetically unfavorable and dynamically unstable hP3-TMB2 phase, the energetically more favorable and dynamically stable TMB3 polytypes explain the experimental structural parameters, mechanical properties, and X-ray diffraction (XRD) patterns better. We demonstrate that such a structural and compositional modification from the hP3-TMB2 phases to the TMB3 polytypes originates from the relief of the strong antibonding interaction between d electrons by removing one third of metal atoms systematically. These results resolve the longstanding structural mystery of this class of metal borides and uncover a hidden family of polytypic structures. Moreover, these polytypic structures provide an additional hardening mechanism by forming nanoscale interlocks that may strongly hinder the interlayer sliding movements, which promises to open a new avenue towards designing novel superhard nanocomposite materials by exploiting the coexistence of various polytypes.

  3. Density functional calculation of transition metal adatom adsorption on graphene.

    PubMed

    Mao, Yuliang; Yuan, Jianmei; Zhong, Jianxin

    2008-03-19

    The functionalization of graphene (a single graphite layer) by the addition of transition metal atoms of Mn, Fe and Co to its surface has been investigated computationally using density functional theory. In the calculation, the graphene surface supercell was constructed from a single layer of graphite (0001) surface separated by vertical vacuum layers 2 nm thick. We found that the center of the hexagonal ring formed by carbon from graphene is the most stable site for Mn, Fe, Co to stay after optimization. The calculated spin-polarized band structures of the graphene encapsulating the Mn adatom indicate that the conduction bands are modified and move down due to the coupling between the Mn atom and graphene. For Fe adsorbed on the graphene surface, it is semi-half-metallic, and the spin polarization P is found to be 100%. The system of Co adatom on graphene exhibits metallic electronic structure due to the density of states (DOS) peak at the band center with both majority and minority spins. Local density of states analyses indicate a larger promotion of 4s electrons into the 3d state in Fe and Co, resulting in lower local moments compared to an Mn adatom on the graphite surface.

  4. K-CO on transition metals: A local ionic interaction

    NASA Astrophysics Data System (ADS)

    Patterson, Charles H.; Schultz, Peter A.; Messmer, Richard P.

    1987-05-01

    The nature of the K-CO interaction on a transition metal surface is addressed when the K:CO stoichiometry is approx. 1. The interaction proposed is transfer of the K 4s electron to CO. A BORN-Haber cycle for this process on a surface has been calculated. The reference state is K plus CO, bound separately to the surface (a). A key point in the cycle is that removal of the electron from K bound to a metal surface (b) is less costly in energy (approx. metal/K surface, i.e., approx. +2.0 eV) than from K in the gas phase (IP = +4.3 eV). This means that the complex is significantly stabilized on the surface. The removed K electron is then transported to the isolated adsorbed CO (c) at a cost of the electron affinity of CO (approx. = 1.5 eV). When the isolated ions are brought together (d) the net stabilization at the equilibrium geometry is approx. - 1.8 eV.

  5. Selective and low temperature transition metal intercalation in layered tellurides

    PubMed Central

    Yajima, Takeshi; Koshiko, Masaki; Zhang, Yaoqing; Oguchi, Tamio; Yu, Wen; Kato, Daichi; Kobayashi, Yoji; Orikasa, Yuki; Yamamoto, Takafumi; Uchimoto, Yoshiharu; Green, Mark A.; Kageyama, Hiroshi

    2016-01-01

    Layered materials embrace rich intercalation reactions to accommodate high concentrations of foreign species within their structures, and find many applications spanning from energy storage, ion exchange to secondary batteries. Light alkali metals are generally most easily intercalated due to their light mass, high charge/volume ratio and in many cases strong reducing properties. An evolving area of materials chemistry, however, is to capture metals selectively, which is of technological and environmental significance but rather unexplored. Here we show that the layered telluride T2PTe2 (T=Ti, Zr) displays exclusive insertion of transition metals (for example, Cd, Zn) as opposed to alkali cations, with tetrahedral coordination preference to tellurium. Interestingly, the intercalation reactions proceed in solid state and at surprisingly low temperatures (for example, 80 °C for cadmium in Ti2PTe2). The current method of controlling selectivity provides opportunities in the search for new materials for various applications that used to be possible only in a liquid. PMID:27966540

  6. Selective and low temperature transition metal intercalation in layered tellurides

    NASA Astrophysics Data System (ADS)

    Yajima, Takeshi; Koshiko, Masaki; Zhang, Yaoqing; Oguchi, Tamio; Yu, Wen; Kato, Daichi; Kobayashi, Yoji; Orikasa, Yuki; Yamamoto, Takafumi; Uchimoto, Yoshiharu; Green, Mark A.; Kageyama, Hiroshi

    2016-12-01

    Layered materials embrace rich intercalation reactions to accommodate high concentrations of foreign species within their structures, and find many applications spanning from energy storage, ion exchange to secondary batteries. Light alkali metals are generally most easily intercalated due to their light mass, high charge/volume ratio and in many cases strong reducing properties. An evolving area of materials chemistry, however, is to capture metals selectively, which is of technological and environmental significance but rather unexplored. Here we show that the layered telluride T2PTe2 (T=Ti, Zr) displays exclusive insertion of transition metals (for example, Cd, Zn) as opposed to alkali cations, with tetrahedral coordination preference to tellurium. Interestingly, the intercalation reactions proceed in solid state and at surprisingly low temperatures (for example, 80 °C for cadmium in Ti2PTe2). The current method of controlling selectivity provides opportunities in the search for new materials for various applications that used to be possible only in a liquid.

  7. Ab initio calculations on the magnetic properties of transition metal complexes

    SciTech Connect

    Bodenstein, Tilmann; Fink, Karin

    2015-12-31

    We present a protocol for the ab initio determination of the magnetic properties of mono- and polynuclear transition metal compounds. First, we obtain the low lying electronic states by multireference methods. Then, we include spin-orbit coupling and an external magnetic field for the determination of zero-field splitting and g-tensors. For the polynuclear complexes the magnetic exchange coupling constants are determined by a modified complete active space self consistent field method. Based on the results of the ab initio calculations, magnetic data such as magnetic susceptibility or magnetization are simulated and compared to experimental data. The results obtained for the polynuclear complexes are further analysed by calculations on model complexes where part of the magnetic centers are substituted by diamagnetic ions. The methods are applied to different Co and Ni containing transition metal complexes.

  8. Electrocatalytic conversion of carbon dioxide to methane and methanol on transition metal surfaces.

    PubMed

    Kuhl, Kendra P; Hatsukade, Toru; Cave, Etosha R; Abram, David N; Kibsgaard, Jakob; Jaramillo, Thomas F

    2014-10-08

    Fuels and industrial chemicals that are conventionally derived from fossil resources could potentially be produced in a renewable, sustainable manner by an electrochemical process that operates at room temperature and atmospheric pressure, using only water, CO2, and electricity as inputs. To enable this technology, improved catalysts must be developed. Herein, we report trends in the electrocatalytic conversion of CO2 on a broad group of seven transition metal surfaces: Au, Ag, Zn, Cu, Ni, Pt, and Fe. Contrary to conventional knowledge in the field, all metals studied are capable of producing methane or methanol. We quantify reaction rates for these two products and describe catalyst activity and selectivity in the framework of CO binding energies for the different metals. While selectivity toward methane or methanol is low for most of these metals, the fact that they are all capable of producing these products, even at a low rate, is important new knowledge. This study reveals a richer surface chemistry for transition metals than previously known and provides new insights to guide the development of improved CO2 conversion catalysts.

  9. Metal-insulator-metal transition in NdNiO3 films capped by CoFe2O4

    NASA Astrophysics Data System (ADS)

    Saleem, M. S.; Song, C.; Peng, J. J.; Cui, B.; Li, F.; Gu, Y. D.; Pan, F.

    2017-02-01

    Metal-insulator transition features as a transformation from a highly charge conductive state to another state where the charge conductivity is greatly suppressed when decreasing the temperature. Here, we demonstrate two consecutive transitions in NdNiO3 films with CoFe2O4 capping, in which the metal-insulator transition occurs at ˜85 K, followed by an unprecedented insulator-metal transition below 40 K. The emerging insulator-metal transition associated with a weak antiferromagnetic behavior is observed in 20 unit cell-thick NdNiO3 with more than 5 unit cell CoFe2O4 capping. Differently, the NdNiO3 films with thinner CoFe2O4 capping only exhibit metal-insulator transition at ˜85 K, accompanied by a strong antiferromagnetic state below 40 K. Charge transfer from Co to Ni, instead of from Fe to Ni, formulates the ferromagnetic interaction between Ni-Ni and Ni-Co atoms, thus suppressing the antiferromagnetic feature and producing a metallic conductive behavior. Furthermore, a phase diagram for the metal-insulator-metal transition in this system is drawn.

  10. Electronic, magnetic and topological properties of transition metal oxides

    NASA Astrophysics Data System (ADS)

    Quan, Yundi

    Transition metal oxides have been the ideal platform for designing materials with exotic properties due to the complex interplay between spin, charge, and orbital degrees of freedom which can be fine-tuned by varying pressure, temperature, and external magnetic field to give rise to novel phases. Transition metal oxides are also a challenge from the theoretical point of view. The (semi)local density approximation for the exchange correlation functional that is often used in density functional calculations fails to adequately describe the many-body effects of 3d and 4f electrons thereby leading to underestimated band gaps. Several techniques, such as hybrid functionals, dynamical mean field theory, and DFT+U, have been developed over the past few decades to account for the many-body effects of 3d and 4f electrons. The DFT+U method, which will be used extensively throughout this thesis, has proved to be very successful in modeling gap opening, structure optimization and predicting transport properties. Rare earth nickelates have attracted a lot of attention in recent years due to their complex phase diagram that arises from the competition between spin, charge, and orbital degrees of freedom. Of particular interest is the metal-insulator transition that occurs upon cooling for RNiO3 (R=rare earth, except for La) which was found to be accompanied by symmetry lowering, later theorized as the evidence for charge ordering. By using first principles calculations, we found that the charge difference between Ni ions in the "charge-ordered" phase is negligibly small, while various aspects such as core energy levels, spectral weight immediately above and below the Fermi level, and magnetic moments do differ. Using Wannier function analysis, the charge states of Ni ions in the lower symmetry structure are systematically studied and found to correlated to the number of Wannier charge centers at the Ni site. The same approach was applied to study the charge states of Ag I and Ag

  11. Metals distributions in activated sludge systems

    SciTech Connect

    Patterson, J.W.; Kodukula, P.S.

    1984-05-01

    Despite extensive laboratory and field studies over the past 25 years, little advance has been made in prediction of metals distribution and removal in activated sludge treatment systems. This paper reports the results of carefully controlled pilot studies, from which empirical metals distribution models were developed. The models accurately predict the distribution of process stream metals at each point in the activated sludge process between the soluble and solids phases. The distribution models together with data on primary and secondary clarifier suspended solids removal efficiencies, are easily applied to predict the removals of influent metals in activated sludge systems. 36 references, 2 figures.

  12. Investigations of Transition Metal Oxide with the Perovskite Structure as Potential Multiferroics

    DTIC Science & Technology

    2008-10-01

    Investigation of Transition Metal Oxides with the Perovskite Structure as Potential Multiferroics by Virginia Lea Miller and Steven C. Tidrow...Adelphi, MD 20783-1197 ARL-TR-4621 October 2008 Investigation of Transition Metal Oxides with the Perovskite Structure as Potential...5b. GRANT NUMBER 4. TITLE AND SUBTITLE Investigation of Transition Metal Oxides with the Perovskite Structure as Potential Multiferroics 5c

  13. Charge-transfer gap closure in transition-metal halides under pressure

    SciTech Connect

    Chen, A.L.; Yu, P.Y.

    1995-01-01

    Insulator-to-metal transition induced by pressure has been studied in three transition metal iodides: NiI{sub 2}, CoI{sub 2} and FeI{sub 2} using optical absorption and resistivity measurements at room temperature. Comparisons between the results obtained by these two techniques suggested that the closure of the charge-transfer gap is the principal mechanism responsible for the insulator-to-metal transition in these materials.

  14. Transition metal-modified zinc oxides for UV and visible light photocatalysis.

    PubMed

    Bloh, J Z; Dillert, R; Bahnemann, D W

    2012-11-01

    In order to use photocatalysis with solar light, finding more active and especially visible light active photocatalysts is a very important challenge. Also, studies of these photocatalysts should employ a standardized test procedure so that their results can be accurately compared and evaluated with one another. A systematic study of transition metal-modified zinc oxide was conducted to determine whether they are suitable as visible light photocatalysts. The photocatalytic activity of ZnO modified with eight different transition metals (Cu, Co, Fe, Mn, Ni, Ru, Ti, Zr) in three different concentrations (0.01, 0.1, and 1 at.%) was investigated under irradiation with UV as well as with visible light. The employed activity test is the gas-phase degradation of acetaldehyde as described by the ISO standard 22197-2. The results suggest that the UV activity can be improved with almost any modification element and that there exists an optimal modification ratio at about 0.1 at.%. Additionally, Mn- and Ru-modified ZnO display visible light activity. Especially the Ru-modified ZnO is highly active and surpasses the visible light activity of all studied titania standards. These findings suggest that modified zinc oxides may be a viable alternative to titanium dioxide-based catalysts for visible light photocatalysis. Eventually, possible underlying mechanisms are proposed and discussed.

  15. Electronic Relaxation Processes of Transition Metal Atoms in Helium Nanodroplets

    NASA Astrophysics Data System (ADS)

    Kautsch, Andreas; Lindebner, Friedrich; Koch, Markus; Ernst, Wolfgang E.

    2014-06-01

    Spectroscopy of doped superfluid helium nanodroplets (He_N) gives information about the influence of this cold, chemically inert, and least interacting matrix environment on the excitation and relaxation dynamics of dopant atoms and molecules. We present the results from laser induced fluorescence (LIF), photoionization (PI), and mass spectroscopy of Cr and Cu doped He_N. From these results, we can draw a comprehensive picture of the complex behavior of such transition metal atoms in He_N upon photo-excitation. The strong Cr and Cu ground state transitions show an excitation blueshift and broadening with respect to the bare atom transitions which can be taken as indication for the solvation inside the droplet. From the originally excited states the atoms relax to energetically lower states and are ejected from the He_N. The relaxation processes include bare atom spin-forbidden transitions, which clearly bears the signature of the He_N influence. Two-color resonant two-photon ionization (2CR2PI) also shows the formation of bare atoms and small Cr-He_n and Cu-He_n clusters in their ground and metastable states ^c. Currently, Cr dimer excitation studies are in progress and a brief outlook on the available results will be given. C. Callegari and W. E. Ernst, Helium Droplets as Nanocryostats for Molecular Spectroscopy - from the Vacuum Ultraviolet to the Microwave Regime, in Handbook of High-Resolution Spectroscopy, eds. M. Quack and F. Merkt, John Wiley & Sons, Chichester, 2011. A. Kautsch, M. Koch, and W. E. Ernst, J. Phys. Chem. A, 117 (2013) 9621-9625, DOI: 10.1021/jp312336m F. Lindebner, A. Kautsch, M. Koch, and W. E. Ernst, Int. J. Mass Spectrom. (2014) in press, DOI: 10.1016/j.ijms.2013.12.022 M. Koch, A. Kautsch, F. Lackner, and W. E. Ernst, submitted to J. Phys. Chem. A

  16. Transition metal chalcogenides: ultrathin inorganic materials with tunable electronic properties.

    PubMed

    Heine, Thomas

    2015-01-20

    CONSPECTUS: After the discovery of graphene and the development of powerful exfoliation techniques, experimental preparation of two-dimensional (2D) crystals can be expected for any layered material that is known to chemistry. Besides graphene and hexagonal boron nitride (h-BN), transition metal chalcogenides (TMC) are among the most studied ultrathin materials. In particular, single-layer MoS2, a direct band gap semiconductor with ∼1.9 eV energy gap, is popular in physics and nanoelectronics, because it nicely complements semimetallic graphene and insulating h-BN monolayer as a construction component for flexible 2D electronics and because it was already successfully applied in the laboratory as basis material for transistors and other electronic and optoelectronic devices. Two-dimensional crystals are subject to significant quantum confinement: compared with their parent layered 3D material, they show different structural, electronic, and optical properties, such as spontaneous rippling as free-standing monolayer, significant changes of the electronic band structure, giant spin-orbit splitting, and enhanced photoluminescence. Most of those properties are intrinsic for the monolayer and already absent for two-layer stacks of the same 2D crystal. For example, single-layer MoS2 is a direct band gap semiconductor with spin-orbit splitting of 150 meV in the valence band, while the bilayer of the same material is an indirect band gap semiconductor without observable spin-orbit splitting. All these properties have been observed experimentally and are in excellent agreement with calculations based on density-functional theory. This Account reports theoretical studies of a subgroup of transition metal dichalcogenides with the composition MX2, with M = Mo, or W and X = Se or S, also referred to as "MoWSeS materials". Results on the electronic structure, quantum confinement, spin-orbit coupling, spontaneous monolayer rippling, and change of electronic properties in the

  17. N,N',N"-tris(dihydroxyphosphorylmethyl)-1,4,7-triazacyclononane (Deofix) - a high-affinity, high-specificity chelator for first transition series metal cations with significant deodorant, antimicrobial, and antioxidant activity.

    PubMed

    Laden, Karl; Zaklad, Haim; Simhon, Elliot D; Klein, Joseph Y; Cyjon, Rosa L; Winchell, Harry S

    2003-01-01

    Deofix, N,N',N"-tris(dihydroxyphosphorylmethyl)-1,4,7-triazacyclononane, is a high-affinity, high-specificity chelator for first transition series cations such as iron, zinc, manganese, and copper. A 1% solution in 50% ethanol was found to be significantly better at reducing underarm malodor than a solution of 0.3% Triclosan in 50% ethanol. Compared to a 50% alcohol control, Deofix was found to produce a significant reduction in malodor for at least 48 hours. Deofix appears to work by reducing the concentration of first transition series metal ions below the levels needed for microbial cell reproduction and by inhibiting oxidative processes by interfering with catalytic formation of free radicals. Deofix has very low levels of toxicity when measured via a number of screening techniques.

  18. Highly active oxygen reduction non-platinum group metal electrocatalyst without direct metal-nitrogen coordination.

    PubMed

    Strickland, Kara; Miner, Elise; Jia, Qingying; Tylus, Urszula; Ramaswamy, Nagappan; Liang, Wentao; Sougrati, Moulay-Tahar; Jaouen, Frédéric; Mukerjee, Sanjeev

    2015-06-10

    Replacement of noble metals in catalysts for cathodic oxygen reduction reaction with transition metals mostly create active sites based on a composite of nitrogen-coordinated transition metal in close concert with non-nitrogen-coordinated carbon-embedded metal atom clusters. Here we report a non-platinum group metal electrocatalyst with an active site devoid of any direct nitrogen coordination to iron that outperforms the benchmark platinum-based catalyst in alkaline media and is comparable to its best contemporaries in acidic media. In situ X-ray absorption spectroscopy in conjunction with ex situ microscopy clearly shows nitrided carbon fibres with embedded iron particles that are not directly involved in the oxygen reduction pathway. Instead, the reaction occurs primarily on the carbon-nitrogen structure in the outer skin of the nitrided carbon fibres. Implications include the potential of creating greater active site density and the potential elimination of any Fenton-type process involving exposed iron ions culminating in peroxide initiated free-radical formation.

  19. Change of universality class of metal-insulator transition due to magnetic ordering

    NASA Astrophysics Data System (ADS)

    de Oliveira, N. A.; Tovar Costa, M. V.; Troper, A.; Japiassú, Gloria M.; Continentino, M. A.

    1999-04-01

    Using a two-band model we report a theory to describe the metal-insulator (MI) transition as a function of an external applied magnetic field in Kondo insulators. To deal with electronic correlations we use a functional integral approach in the static approximation. We show the existence of a critical value of the Coulomb correlation Uc, such that for Utransition is continuous and occurs from a paramagnetic insulator to a paramagnetic metal. In this case this transition is in the universality class of density-driven transitions. For U>Uc, the transition is to a ferromagnetic metal and it is described by different critical exponents.

  20. Excitonic linewidth and coherence lifetime in monolayer transition metal dichalcogenides

    DOE PAGES

    Selig, Malte; Berghäuser, Gunnar; Raja, Archana; ...

    2016-11-07

    Atomically thin transition metal dichalcogenides are direct-gap semiconductors with strong light–matter and Coulomb interactions. The latter accounts for tightly bound excitons, which dominate their optical properties. Besides the optically accessible bright excitons, these systems exhibit a variety of dark excitonic states. They are not visible in the optical spectra, but can strongly influence the coherence lifetime and the linewidth of the emission from bright exciton states. We investigate the microscopic origin of the excitonic coherence lifetime in two representative materials (WS2 and MoSe2) through a study combining microscopic theory with spectroscopic measurements. We also show that the excitonic coherence lifetimemore » is determined by phonon-induced intravalley scattering and intervalley scattering into dark excitonic states. Particularly, we identify exciton relaxation processes involving phonon emission into lower-lying dark states that are operative at all temperatures, in WS2.« less

  1. Excitonic linewidth and coherence lifetime in monolayer transition metal dichalcogenides

    SciTech Connect

    Selig, Malte; Berghäuser, Gunnar; Raja, Archana; Nagler, Philipp; Schüller, Christian; Heinz, Tony F.; Korn, Tobias; Chernikov, Alexey; Malic, Ermin; Knorr, Andreas

    2016-11-07

    Atomically thin transition metal dichalcogenides are direct-gap semiconductors with strong light–matter and Coulomb interactions. The latter accounts for tightly bound excitons, which dominate their optical properties. Besides the optically accessible bright excitons, these systems exhibit a variety of dark excitonic states. They are not visible in the optical spectra, but can strongly influence the coherence lifetime and the linewidth of the emission from bright exciton states. We investigate the microscopic origin of the excitonic coherence lifetime in two representative materials (WS2 and MoSe2) through a study combining microscopic theory with spectroscopic measurements. We also show that the excitonic coherence lifetime is determined by phonon-induced intravalley scattering and intervalley scattering into dark excitonic states. Particularly, we identify exciton relaxation processes involving phonon emission into lower-lying dark states that are operative at all temperatures, in WS2.

  2. Mechanism of Transition-Metal Nanoparticle Catalytic Graphene Cutting.

    PubMed

    Ma, Liang; Wang, Jinlan; Yip, Joanne; Ding, Feng

    2014-04-03

    Catalytic cutting by transition-metal (TM) particles is a promising method for the synthesizing of high-quality graphene quantum dots and nanoribbons with smooth edges. Experimentally, it is observed that the cutting always results in channels with zigzag (ZZ) or armchair (AC) edges. However, the driving force that is responsible for such a cutting behavior remains a puzzle. Here, by calculating the interfacial formation energies of the TM-graphene edges with ab initio method, we show that the surface of a catalyst particle tends to be aligned along either AC or ZZ direction of the graphene lattice, and thus the cutting of graphene is guided as such. The different cutting behaviors of various catalysts are well-explained based on the competition between TM-passivated graphene edges and the etching-agent-terminated ones. Furthermore, the kinetics of graphene catalytic cutting along ZZ and AC directions, respectively, are explored at the atomic level.

  3. Topologically insulating states in ternary transition metal dichalcogenides

    NASA Astrophysics Data System (ADS)

    Lin, Xianqing; Ni, Jun

    2017-01-01

    The topological and electronic properties of monolayered monoclinic transition metal dichalcogenide (TMD) alloys (1T '-M1-xNxX2 with M, N = Cr, Mo, W and X = S, Se) have been studied through calculations based on the projected Wannier functions obtained from first-principles calculations. We predict that the ternary compounds 1T '-Mo1-xCrxS2 with x up to 7/12 and all 1T '-Mo1-xWxSe2 host topologically insulating states with band gaps comparable to the pure systems. For Cr contained alloys, the mechanism of sign changing of Berry curvature is proposed to explain the trivial band topology of some configurations. The predicted topologically insulating ternary TMDs may be promising candidates for future realization of topological devices.

  4. Chiral topological excitons in the monolayer transition metal dichalcogenides.

    PubMed

    Gong, Z R; Luo, W Z; Jiang, Z F; Fu, H C

    2017-02-10

    We theoretically investigate the chiral topological excitons emerging in the monolayer transition metal dichalcogenides, where a bulk energy gap of valley excitons is opened up by a position dependent external magnetic field. We find two emerging chiral topological nontrivial excitons states, which exactly connects to the bulk topological properties, i.e., Chern number = 2. The dependence of the spectrum of the chiral topological excitons on the width of the magnetic field domain wall as well as the magnetic filed strength is numerically revealed. The chiral topological valley excitons are not only important to the excitonic transport due to prevention of the backscattering, but also give rise to the quantum coherent control in the optoelectronic applications.

  5. Excitonic linewidth and coherence lifetime in monolayer transition metal dichalcogenides

    PubMed Central

    Selig, Malte; Berghäuser, Gunnar; Raja, Archana; Nagler, Philipp; Schüller, Christian; Heinz, Tony F.; Korn, Tobias; Chernikov, Alexey; Malic, Ermin; Knorr, Andreas

    2016-01-01

    Atomically thin transition metal dichalcogenides are direct-gap semiconductors with strong light–matter and Coulomb interactions. The latter accounts for tightly bound excitons, which dominate their optical properties. Besides the optically accessible bright excitons, these systems exhibit a variety of dark excitonic states. They are not visible in the optical spectra, but can strongly influence the coherence lifetime and the linewidth of the emission from bright exciton states. Here, we investigate the microscopic origin of the excitonic coherence lifetime in two representative materials (WS2 and MoSe2) through a study combining microscopic theory with spectroscopic measurements. We show that the excitonic coherence lifetime is determined by phonon-induced intravalley scattering and intervalley scattering into dark excitonic states. In particular, in WS2, we identify exciton relaxation processes involving phonon emission into lower-lying dark states that are operative at all temperatures. PMID:27819288

  6. Chiral topological excitons in the monolayer transition metal dichalcogenides

    NASA Astrophysics Data System (ADS)

    Gong, Z. R.; Luo, W. Z.; Jiang, Z. F.; Fu, H. C.

    2017-02-01

    We theoretically investigate the chiral topological excitons emerging in the monolayer transition metal dichalcogenides, where a bulk energy gap of valley excitons is opened up by a position dependent external magnetic field. We find two emerging chiral topological nontrivial excitons states, which exactly connects to the bulk topological properties, i.e., Chern number = 2. The dependence of the spectrum of the chiral topological excitons on the width of the magnetic field domain wall as well as the magnetic filed strength is numerically revealed. The chiral topological valley excitons are not only important to the excitonic transport due to prevention of the backscattering, but also give rise to the quantum coherent control in the optoelectronic applications.

  7. On holographic disorder-driven metal-insulator transitions

    NASA Astrophysics Data System (ADS)

    Baggioli, Matteo; Pujolàs, Oriol

    2017-01-01

    We give a minimal holographic model of a disorder-driven metal-insulator transition. It consists in a CFT with a charge sector and a translation-breaking sector that interact in the most generic way allowed by the symmetries and by dynamical consistency. In the gravity dual, it reduces to a Massive Gravity-Maxwell model with a new direct coupling between the gauge field and the metric that is allowed when gravity is massive. We show that the effect of this coupling is to decrease the DC electrical conductivity generically. This gives a nontrivial check that holographic massive gravity can be consistently interpreted as disorder from the CFT perspective. The suppression of the conductivity happens to such an extent that it does not obey any lower bound and it can be very small in the insulating phase. In some cases, the large disorder limit produces gradient instabilities that hint at the formation of modulated phases.

  8. Chiral topological excitons in the monolayer transition metal dichalcogenides

    PubMed Central

    Gong, Z. R.; Luo, W. Z.; Jiang, Z. F.; Fu, H. C.

    2017-01-01

    We theoretically investigate the chiral topological excitons emerging in the monolayer transition metal dichalcogenides, where a bulk energy gap of valley excitons is opened up by a position dependent external magnetic field. We find two emerging chiral topological nontrivial excitons states, which exactly connects to the bulk topological properties, i.e., Chern number = 2. The dependence of the spectrum of the chiral topological excitons on the width of the magnetic field domain wall as well as the magnetic filed strength is numerically revealed. The chiral topological valley excitons are not only important to the excitonic transport due to prevention of the backscattering, but also give rise to the quantum coherent control in the optoelectronic applications. PMID:28186154

  9. Surfactant-Modified Diffusion on Transition-Metal Surfaces

    SciTech Connect

    FEIBELMAN,PETER J.; KELLOGG,GARY LEE

    1999-12-01

    Wanting to convert surface impurities from a nuisance to a systematically applicable nano-fabrication tool, we have sought to understand how such impurities affect self-diffusion on transition-metal surfaces. Our field-ion microscope experiments reveal that in the presence of surface hydrogen, self-diffusion on Rh(100) is promoted, while on Pt(100), not only is it inhibited, but its mechanism changes. First-principles calculations aimed at learning how oxygen fosters perfect layerwise growth on a growing Pt(111) crystal contradict the idea in the literature that it does so by directly promoting transport over Pt island boundaries. The discovery that its real effect is to burn off adventitious adsorbed carbon monoxide demonstrates the predictive value of state-of-the-art calculation methods.

  10. Sonochemical synthesis of mesoporous transition metal and rare earth oxides.

    PubMed

    Wang, Yanqin; Yin, Lunxiang; Gedanken, Arahon

    2002-11-01

    Straight-extended layered mesostructures based on transItion metal (Fe, Cr) and rare earth (Y, Ce, La, Sm, Er) oxides are synthesized by sonication for 3 h. After a longer period of sonication (6 h), hexagonal mesostructures based on Y- and Er-oxides are obtained. The surface areas of the Y-based hexagonal mesophases before and after extraction are 46.5, 256 m2/g, respectively. For Er-based hexagonal mesophases, the surface areas before and after extraction are 157 and 225 m2/g. The pore sizes after extraction are 5.0 and 2.2 nm for Y- and Er-based mesophases, respectively. Hexagonal mesostructures are also obtained for Zr-based material after sonication for 3 h and the hexagonal structure is still maintained after calcinations at 400 degrees C for 4 h, although the surface area is only 35 m2/g.

  11. Proximity-induced magnetism in transition-metal substituted graphene

    NASA Astrophysics Data System (ADS)

    Crook, Charles B.; Constantin, Costel; Ahmed, Towfiq; Zhu, Jian-Xin; Balatsky, Alexander V.; Haraldsen, Jason T.

    2015-08-01

    We investigate the interactions between two identical magnetic impurities substituted into a graphene superlattice. Using a first-principles approach, we calculate the electronic and magnetic properties for transition-metal substituted graphene systems with varying spatial separation. These calculations are compared for three different magnetic impurities, manganese, chromium, and vanadium. We determine the electronic band structure, density of states, and Millikan populations (magnetic moment) for each atom, as well as calculate the exchange parameter between the two magnetic atoms as a function of spatial separation. We find that the presence of magnetic impurities establishes a distinct magnetic moment in the graphene lattice, where the interactions are highly dependent on the spatial and magnetic characteristic between the magnetic and carbon atoms, which leads to either ferromagnetic or antiferromagnetic behavior. Furthermore, through an analysis of the calculated exchange energies and partial density of states, it is determined that interactions between the magnetic atoms can be classified as an RKKY interaction.

  12. Proximity-induced magnetism in transition-metal substituted graphene

    PubMed Central

    Crook, Charles B.; Constantin, Costel; Ahmed, Towfiq; Zhu, Jian-Xin; Balatsky, Alexander V.; Haraldsen, Jason T.

    2015-01-01

    We investigate the interactions between two identical magnetic impurities substituted into a graphene superlattice. Using a first-principles approach, we calculate the electronic and magnetic properties for transition-metal substituted graphene systems with varying spatial separation. These calculations are compared for three different magnetic impurities, manganese, chromium, and vanadium. We determine the electronic band structure, density of states, and Millikan populations (magnetic moment) for each atom, as well as calculate the exchange parameter between the two magnetic atoms as a function of spatial separation. We find that the presence of magnetic impurities establishes a distinct magnetic moment in the graphene lattice, where the interactions are highly dependent on the spatial and magnetic characteristic between the magnetic and carbon atoms, which leads to either ferromagnetic or antiferromagnetic behavior. Furthermore, through an analysis of the calculated exchange energies and partial density of states, it is determined that interactions between the magnetic atoms can be classified as an RKKY interaction. PMID:26235646

  13. Transition metal dichalcogenides based saturable absorbers for pulsed laser technology

    NASA Astrophysics Data System (ADS)

    Mohanraj, J.; Velmurugan, V.; Sivabalan, S.

    2016-10-01

    Ultrashort pulsed laser is an indispensable tool for the evolution of photonic technology in the present and future. This laser has been progressing tremendously with new pulse regimes and incorporating novel devices inside its cavity. Recently, a nanomaterial based saturable absorber (SA) was used in ultrafast laser that has improved the lasing performance and caused a reduction in the physical dimension when compared to conventional SAs. To date, the nanomaterials that are exploited for the development of SA devices are carbon nanotubes, graphene, topological insulators, transition metal dichalcogenides (TMDs) and black phosphorous. These materials have unique advantages such as high nonlinear optical response, fiber compatibility and ease of fabrication. In these, TMDs are prominent and an emerging two-dimensional nanomaterial for photonics and optoelectronics applications. Therefore, we review the reports of Q-switched and mode-locked pulsed lasers using TMDs (specifically MoS2, MoSe2, WS2 and WSe2) based SAs.

  14. Transition Metal Carbides and Nitrides in Energy Storage and Conversion.

    PubMed

    Zhong, Yu; Xia, Xinhui; Shi, Fan; Zhan, Jiye; Tu, Jiangping; Fan, Hong Jin

    2016-05-01

    High-performance electrode materials are the key to advances in the areas of energy conversion and storage (e.g., fuel cells and batteries). In this Review, recent progress in the synthesis and electrochemical application of transition metal carbides (TMCs) and nitrides (TMNs) for energy storage and conversion is summarized. Their electrochemical properties in Li-ion and Na-ion batteries as well as in supercapacitors, and electrocatalytic reactions (oxygen evolution and reduction reactions, and hydrogen evolution reaction) are discussed in association with their crystal structure/morphology/composition. Advantages and benefits of nanostructuring (e.g., 2D MXenes) are highlighted. Prospects of future research trends in rational design of high-performance TMCs and TMNs electrodes are provided at the end.

  15. Quantum dot photosensitizers. Interactions with transition metal centers.

    PubMed

    Burks, Peter T; Ford, Peter C

    2012-11-14

    Semiconductor quantum dots (QDs) are attractive for potential use as photosensitizers for a variety of applications. These nanomaterials have very high absorption cross-sections and often display strong photoluminescence (PL). Furthermore, QD absorption and emission spectra can be tuned simply by varying their size, and QD surfaces can be modified to access multiple sites for attaching potential acceptors as well as other functionalities. Here we provide an overview of recent studies concerned with the photosensitization of transition metal centers and other acceptors. Particular focus is directed towards potential therapeutic applications and to our own interest in the delivery of small molecule bioregulators to physiological targets. Studies that have addressed factors that control likely energy and charge transfer processes between QD donors and acceptor molecules are also discussed. Understanding the mechanisms of these photosensitization processes can provide design guidelines for successful applications.

  16. Observation of Interlayer Phonons in Transition Metal Dichalcogenide Heterostructures

    NASA Astrophysics Data System (ADS)

    He, Rui; Ye, Zhipeng; Ji, Chao; Means-Shively, Casie; Anderson, Heidi; Kidd, Tim; Chiu, Kuan-Chang; Chou, Cheng-Tse; Wu, Jenn-Ming; Lee, Yi-Hsien; Andersen, Trond; Lui, Chun Hung

    Interlayer phonon modes in transition metal dichalcogenide (TMD) heterostructures are observed for the first time. We measured the low-frequency Raman response of MoS2/WSe2 and MoSe2/MoS2 heterobilayers. We discovered a distinct Raman mode (30 - 35 cm-1) that cannot be found in any individual monolayers. By comparing with Raman spectra of Bernal bilayer (2L) MoS2, 2L MoSe2 and 2L WSe2, we identified the new Raman mode as the layer breathing vibration arising from the vertical displacement of the two TMD layers. The layer breathing mode (LBM) only emerges in bilayer regions with atomically close layer-layer proximity and clean interface. In addition, the LBM frequency exhibits noticeable dependence on the rotational angle between the two TMD layers, which implies a change of interlayer separation and interlayer coupling strength with the layer stacking.

  17. Chemical vapour deposition: Transition metal carbides go 2D

    DOE PAGES

    Gogotsi, Yury

    2015-08-17

    Here, the research community has been steadily expanding the family of few-atom-thick crystals beyond graphene, discovering new materials or producing known materials in a 2D state and demonstrating their unique properties1, 2. Recently, nanometre-thin 2D transition metal carbides have also joined this family3. Writing in Nature Materials, Chuan Xu and colleagues now report a significant advance in the field, showing the synthesis of large-area, high-quality, nanometre-thin crystals of molybdenum carbide that demonstrate low-temperature 2D superconductivity4. Moreover, they also show that other ultrathin carbide crystals, such as tungsten and tantalum carbides, can be grown by chemical vapour deposition with a highmore » crystallinity and very low defect concentration.« less

  18. Transition Metal Carbides and Nitrides in Energy Storage and Conversion

    PubMed Central

    Zhong, Yu; Shi, Fan; Zhan, Jiye; Tu, Jiangping

    2016-01-01

    High‐performance electrode materials are the key to advances in the areas of energy conversion and storage (e.g., fuel cells and batteries). In this Review, recent progress in the synthesis and electrochemical application of transition metal carbides (TMCs) and nitrides (TMNs) for energy storage and conversion is summarized. Their electrochemical properties in Li‐ion and Na‐ion batteries as well as in supercapacitors, and electrocatalytic reactions (oxygen evolution and reduction reactions, and hydrogen evolution reaction) are discussed in association with their crystal structure/morphology/composition. Advantages and benefits of nanostructuring (e.g., 2D MXenes) are highlighted. Prospects of future research trends in rational design of high‐performance TMCs and TMNs electrodes are provided at the end. PMID:27812464

  19. Moderate temperature sodium cells. I - Transition metal disulfide cathodes

    NASA Technical Reports Server (NTRS)

    Abraham, K. M.; Pitts, L.; Schiff, R.

    1980-01-01

    TiS2, VS2, and Nb(1.1)S2 transition metal disulfides were evaluated as cathode materials for a moderate temperature rechargeable Na cell operating at 130 C. The 1st discharge of TiS2 results in a capacity of 0.85 eq/mole; approximately half of the Na in the 1st phase spanning the Na range from zero to 0.30 and almost all the Na in the 2nd phase spanning the 0.37 to 0.80 range are rechargeable. VS2 intercalates up to one mole of Na/mole of VS2 in the 1st discharge; the resulting Na(x)VS2 ternary consists of 3 phases in the 3 ranges of Na from zero to 1. Niobium disulfide undergoes a phase change in the 1st discharge; the average rechargeable capacity in extended cycling of this cathode is 0.50 eq/mole.

  20. Superconductor to Quantum Metal Transitions in Ultra Thin Films

    NASA Astrophysics Data System (ADS)

    Lin, Yen-Hsiang; Goldman, Allen M.

    2009-03-01

    Homogeneous films of amorphous bismuth have been continuously tuned from the superconducting state by increasing a perpendicular magnetic field. Electrical transport and Hall measurements show that the non-superconducting states of the films are quantum-corrected metals. In the vicinity of transition field, the resistance can be fit by an Arrhenius type of conduction at high temperatures but this form fails at lower temperatures where the resistance is a non-monotonic function of temperature. This suggests that a two-phase regime develops near criticality. Theories suggest that this is in the form of superconducting puddles embedded in a normal matrix^1,2. ^1B. Spivak, P. Oreto, and S. A. Kivelson, Phys. Rev. B 77, 214523 (2008) ^2Y. Dubi, Y. Meir, and Y. Avishai, Nature 449, 876-880 (2007)