Science.gov

Sample records for activity based startup

  1. Activity Based Startup Plan for Prototype Vertical Denitration Calciner

    SciTech Connect

    SUTTER, C.S.

    1999-08-31

    Testing activities on the Prototype Vertical Denitration Calciner at PFP were suspended in January 1997 due to the hold on fissile material handling in the facility. The restart of testing activities will require a review through an activity based startup process based upon Integrated Safety Management (ISM) principles to verify readiness. The Activity Based Startup Plan has been developed for this process.

  2. Activity Based Startup Plan for Prototype Vertical Denitration Calciner

    SciTech Connect

    SUTTER, C.S.

    1999-08-16

    Testing activities on the Prototype Vertical Denitration Calciner at Plutonium Finish Plant (PFP) were suspended in January 1997 due to the hold on fissile material handling in the facility. The restart of testing activities will require a review through an activity based startup process based upon Integrated Safety Management (ISM) principles to verify readiness. The Activity Based Startup Plan for the Prototype vertical Denitration Calciner has been developed for this process.

  3. Start-up of the Anammox process from the conventional activated sludge in a membrane bioreactor.

    PubMed

    Wang, Tao; Zhang, Hanmin; Yang, Fenglin; Liu, Sitong; Fu, Zhimin; Chen, Huihui

    2009-05-01

    A lab-scale membrane bioreactor (MBR) was used to start-up the anaerobic ammonium oxidation (Anammox) process from the conventional activated sludge for 2 months. Results indicated the MBR could be a novel and suitable system for start-up of the Anammox process. The Anammox activity appeared after 16 days operation, and the average removal efficiencies of ammonia and nitrite were both over 90% in the end. A final specific Anammox activity of 0.35 g NH(4)(+)-N+NO(2)(-)-N (gVSS *d)(-1) was obtained. Fluorescence in situ hybridization (FISH) analysis confirmed the existence of Anammox bacteria and aerobic ammonia oxidizing bacteria. On the basis of results on MBR performance and FISH analysis, it was proposed that the start-up process was essentially a microbial community succession under man-made disturbance, and a climax community with Anammox bacteria as the dominant population was finally established.

  4. Comparison between MBR and SBR on Anammox start-up process from the conventional activated sludge.

    PubMed

    Wang, Tao; Zhang, Hanmin; Gao, Dawen; Yang, Fenglin; Zhang, Guangyi

    2012-10-01

    Anammox start-up performances from the conventional activated sludge were compared between a MBR and SBR. Both the reactors successfully started up Anammox process. The start-up period in the MBR (59 days) was notably shorter than that in the SBR (101 days), and the max nitrogen (NH(4)(+)+NO(2)(-)) removal capacity of 345.2 mg N L(-1) d(-1) in the MBR was also higher than that of 292.0 mg N L(-1) d(-1) in the SBR. FISH analysis showed that Anammox bacteria predominated in both reactors. Phylogenetic analysis further disclosed that the MBR had the better biodiversity of Anammox bacteria and gained a higher ecological stability. Generally, the results showed that MBR exhibited a more excellent performance for Anammox start-up.

  5. Success and Failure in University-Based Startups

    NASA Astrophysics Data System (ADS)

    Dehn, J.; Webley, P.; Cunningham, K. W.

    2014-12-01

    Adapting from a traditional government-funded research program to supporting the work through a start-up company is a difficult (and often not successful) transition. This is made more challenging in that with the relative decline in federal funding for the sciences the transition is forced on many researchers as a matter of survival. The business model of traditional research is not that different from that of the private sector; the development of an idea, models or mock-ups of the product, pitching to sources of funding, creating and marketing the product. However they differ significantly in the environment in which they are applied, as well as in the life span of a project or product. The environments for pitching an idea and gaining investment are very different in academia from that of the private sector, and most academics are stymied by the new approach. In addition, many universities labor under the illusion that start-ups will be a windfall, when in reality they represent a long term investment that will not pay out for many years. This extended timeline is also something new to academics, though persistence pays and a project may take years to fund, after it is complete and the publications written, many in the geosciences go on to new ideas. If a business is to be successful it must continue with a product long term, and develop new ideas around it. A hopefully successful balance of these approaches is being tried at the University of Alaska Fairbanks, where start-ups can build upon university intellectual property and use university resources to build a successful business. In turn the business supports research and development, primarily through faculty, staff and students at the university.

  6. Start-Up of an Anaerobic Dynamic Membrane Digester for Waste Activated Sludge Digestion: Temporal Variations in Microbial Communities

    PubMed Central

    Yu, Hongguang; Wang, Qiaoying; Wang, Zhiwei; Sahinkaya, Erkan; Li, Yongli; Ma, Jinxing; Wu, Zhichao

    2014-01-01

    An anaerobic dynamic membrane digester (ADMD) was developed to digest waste sludge, and pyrosequencing was used to analyze the variations of the bacterial and archaeal communities during the start-up. Results showed that bacterial community richness decreased and then increased over time, while bacterial diversity remained almost the same during the start-up. Proteobacteria and Bacteroidetes were the major phyla. At the class level, Betaproteobacteria was the most abundant at the end of start-up, followed by Sphingobacteria. In the archaeal community, richness and diversity peaked at the end of the start-up stage. Principle component and cluster analyses demonstrated that archaeal consortia experienced a distinct shift and became stable after day 38. Methanomicrobiales and Methanosarcinales were the two predominant orders. Further investigations indicated that Methanolinea and Methanosaeta were responsible for methane production in the ADMD system. Hydrogenotrophic pathways might prevail over acetoclastic means for methanogenesis during the start-up, supported by specific methanogenic activity tests. PMID:24695488

  7. Effect of pre-acclimation of granular activated carbon on microbial electrolysis cell startup and performance.

    PubMed

    LaBarge, Nicole; Yilmazel, Yasemin Dilsad; Hong, Pei-Ying; Logan, Bruce E

    2017-02-01

    Microbial electrolysis cells (MECs) can generate methane by fixing carbon dioxide without using expensive catalysts, but the impact of acclimation procedures on subsequent performance has not been investigated. Granular activated carbon (GAC) was used to pre-enrich electrotrophic methanogenic communities, as GAC has been shown to stimulate direct transfer of electrons between different microbial species. MEC startup times using pre-acclimated GAC were improved compared to controls (without pre-acclimation or without GAC), and after three fed batch cycles methane generation rates were similar (P>0.4) for GAC acclimated to hydrogen (22±9.3nmolcm(-3)d(-1)), methanol (25±9.7nmolcm(-3)d(-1)), and a volatile fatty acid (VFA) mix (22±11nmolcm(-3)d(-1)). However, MECs started with GAC but no pre-acclimation had lower methane generation rates (13±4.1nmolcm(-3)d(-1)), and MECs without GAC had the lowest rates (0.7±0.8nmolcm(-3)d(-1) after cycle 2). Microbes previously found in methanogenic MECs, or previously shown to be capable of exocellular electron transfer, were enriched on the GAC. Pre-acclimation using GAC is therefore a simple approach to enrich electroactive communities, improve methane generation rates, and decrease startup times in MECs.

  8. Startup of the Anammox Process in a Membrane Bioreactor (AnMBR) from Conventional Activated Sludge.

    PubMed

    Gutwiński, P; Cema, G; Ziembińska-Buczyńska, A; Surmacz-Górska, J; Osadnik, M

    2016-12-01

      In this study, a laboratory-scale anammox process in a membrane bioreactor (AnMBR) was used to startup the anaerobic ammonium oxidation (anammox) process from conventional activated sludge. Stable operation was achieved after 125 days. From that time, nitrogen load was gradually increased. After six months, the average nitrogen removal efficiency exceeded 80%. The highest obtained special anammox activity (SAA) achieved was 0.17 g (-N + -N) (g VSS × d)-1. Fluorescent in situ hybridization also proved the presence of the anammox bacteria, typically a genus of Brocadia anammoxidans and Kuenenia stuttgartiensis.

  9. Start-up procedures and analysis of heavy metals inhibition on methanogenic activity in EGSB reactor.

    PubMed

    Colussi, I; Cortesi, A; Della Vedova, L; Gallo, V; Robles, F K Cano

    2009-12-01

    The effectiveness of operating an industrial UASB reactor, treating wastewater from the beer industry, with flows containing heavy metals was evaluated. A pilot-scale UASB reactor, already used to simulate the industrial reactor, was unsuccessfully employed. An easy start-up was obtained arranging it as an EGSB reactor. Considerations about this modification are reported. The effects of Cu(II), Ni(II) and Cr(III) ions on the anaerobic activity were analyzed by measurements of methane production rate and COD removal. The employed biomass was the sludge of the industrial UASB reactor, while a solution of ethanol and sodium acetate with COD of 3000 mg/L and a heavy metal concentration of 50 mg/L were continuously fed. Experimental results proved higher biomass sensitivity for copper and much slighter for nickel and chromium. Moreover, copper inhibition has been demonstrated to be less significant if a metal-free feed was provided to the system before copper addition.

  10. Life Science Start-up Activities at the Universities of Applied Sciences (UAS).

    PubMed

    Huber, Gerda

    2014-12-01

    The universities of applied sciences (UAS) provide several values for the society and economy of a country. Besides education of high level professionals, transfer of knowledge from research to applications in industry or as new start-up companies is an important task. This is done in different ways in the various disciplines. In Life Sciences, a key industry branch in Switzerland, innovation is a competitive success factor and research findings from UAS/Life Sciences contribute to the valorization of new technologies to products, services and to business performance. In order to foster awareness for the innovation need of industry, UAS install processes and support for transfer of research and technology results to marketable applications. Furthermore they may facilitate contacts of researchers and students with entrepreneurs in order to animate start-up founding as a true alternative to being employed. Access to coaching and entrepreneurial training completes the essential basis.

  11. Assessment study of RELAP5/MOD2, CYCLE 36. 04 based on spray start-up test for DOEL-4

    SciTech Connect

    Moeyaert, P.; Stubbe, E.

    1989-07-01

    This report presents an assessment study for the code RELAP-5 MOD-2 based on a pressurizer spray start-up test of the Doel-4 power plant. Doel-4 is a three loop WESTINGHOUSE PWR plant ordered by the EBES utility with a nominal power rating of 1000 MWe and equipped with preheater type E steam generators. A large series of commissioning tests are normally performed on new plants, of which the so called pressurizer spray and heater test (SU-PR-01) was performed on February 2nd 1985. TRACTEBEL, being the Architect-Engineer for this plant was closely involved with all start-up tests and was responsible for the final approval of the tests.

  12. The processing of rotor startup signals based on empirical mode decomposition

    NASA Astrophysics Data System (ADS)

    Gai, Guanghong

    2006-01-01

    In this paper, we applied empirical mode decomposition method to analyse rotor startup signals, which are non-stationary and contain a lot of additional information other than that from its stationary running signals. The methodology developed in this paper decomposes the original startup signals into intrinsic oscillation modes or intrinsic modes function (IMFs). Then, we obtained rotating frequency components for Bode diagrams plot by corresponding IMFs, according to the characteristics of rotor system. The method can obtain precise critical speed without complex hardware support. The low-frequency components were extracted from these IMFs in vertical and horizontal directions. Utilising these components, we constructed a drift locus of rotor revolution centre, which provides some significant information to fault diagnosis of rotating machinery. Also, we proved that empirical mode decomposition method is more precise than Fourier filter for the extraction of low-frequency component.

  13. Start-Up Characteristics of a Granule-Based Anammox UASB Reactor Seeded with Anaerobic Granular Sludge

    PubMed Central

    Wang, Yun-Yan; Tang, Chong-Jian; Chai, Li-Yuan; Xu, Kang-Que; Song, Yu-Xia

    2013-01-01

    The granulation of anammox sludge plays an important role in the high nitrogen removal performance of the anammox reactor. In this study, anaerobic granular sludge was selected as the seeding sludge to start up anammox reactor in order to directly obtain anammox granules. Results showed that the anammox UASB reactor was successfully started up by inoculating anaerobic granular sludge, with substrate capacity of 4435.2 mg/(L·d) and average ammonium and nitrite removal efficiency of 90.36% and 93.29%, respectively. During the start-up course, the granular sludge initially disintegrated and then reaggregated and turned red, suggesting the high anammox performance. Zn-Fe precipitation was observed on the surface of granules during the operation by SEM-EDS, which would impose inhibition to the anammox activity of the granules. Accordingly, it is suggested to relatively reduce the trace metals concentrations, of Fe and Zn in the conventional medium. The findings of this study are expected to be used for a shorter start-up and more stable operation of anammox system. PMID:24455691

  14. Synthetic reconstruction of recycling on the limiter during startup phase of W7-X based on EMC3-EIRENE simulations

    NASA Astrophysics Data System (ADS)

    Frerichs, Heinke; Effenberg, Florian; Schmitz, Oliver; Stephey, Laurie; W7-X Team

    2016-10-01

    Interpretation of spectroscopic measurements in the edge region of high-temperature plasmas can be a challenge due to line of sight integration effects. The EMC3-EIRENE code - a 3D fluid edge plasma and kinetic neutral gas transport code - is a suitable tool for full 3D reconstruction of such signals. A versatile synthetic diagnostic module has been developed recently which allows the realistic three dimensional setup of various plasma edge diagnostics to be captured. We present an analysis of recycling on the inboard limiter of W7-X during its startup phase in terms of a synthetic camera for Hα light observations and reconstruct the particle flux from these synthetic images based on ionization per photon coefficients (S/XB). We find that line of sight integration effects can lead to misinterpretation of data (redistribution of particle flux due to neutral gas diffusion), and that local plasma effects are important for the correct treatment of photon emissions. This work was supported by the U.S. Department of Energy (DOE) under Grant DE-SC0014210, by startup funds of the Department of Engineering Physics at the University of Wisconsin - Madison, and by the EUROfusion Consortium under Euratom Grant No 633053.

  15. Electrical start-up for diesel fuel processing in a fuel-cell-based auxiliary power unit

    NASA Astrophysics Data System (ADS)

    Samsun, Remzi Can; Krupp, Carsten; Tschauder, Andreas; Peters, Ralf; Stolten, Detlef

    2016-01-01

    As auxiliary power units in trucks and aircraft, fuel cell systems with a diesel and kerosene reforming capacity offer the dual benefit of reduced emissions and fuel consumption. In order to be commercially viable, these systems require a quick start-up time with low energy input. In pursuit of this end, this paper reports an electrical start-up strategy for diesel fuel processing. A transient computational fluid dynamics model is developed to optimize the start-up procedure of the fuel processor in the 28 kWth power class. The temperature trend observed in the experiments is reproducible to a high degree of accuracy using a dual-cell approach in ANSYS Fluent. Starting from a basic strategy, different options are considered for accelerating system start-up. The start-up time is reduced from 22 min in the basic case to 9.5 min, at an energy consumption of 0.4 kW h. Furthermore, an electrical wire is installed in the reformer to test the steam generation during start-up. The experimental results reveal that the generation of steam at 450 °C is possible within seconds after water addition to the reformer. As a result, the fuel processor can be started in autothermal reformer mode using the electrical concept developed in this work.

  16. Rapid start-up of the anammox process: Effects of five different sludge extracellular polymeric substances on the activity of anammox bacteria.

    PubMed

    Guo, Jianbo; Wang, Sihui; Lian, Jing; Ngo, Huu Hao; Guo, Wenshan; Liu, Yunman; Song, Yuanyuan

    2016-11-01

    This study investigated the rapid start-up of the anaerobic ammonium oxidation (anammox) strategy by inoculating different biomass ratios of denitrifying granular sludge and anammox bacteria. The results demonstrated that two reactors (R1 and R2) were rapidly and successfully started-up on days 25 and 28, respectively, with nitrogen removal rates (NRRs) of 0.70kg/(m(3)·d) and 0.72kg/(m(3)·d) at biomass ratios of 10:1 (R1) and 50:1 (R2). The explanation for rapid start-up was found by examining the effect of five different sludge extracellular polymeric substances (EPS) on the activity of anammox bacteria in the batch experiments. Batch experiments results first demonstrated that the denitrification sludge EPS (DS-EPS) enhanced the anammox bacteria activity the most, and NO2(-)-N, NH4(+)-N removal rates were 1.88- and 1.53-fold higher than the control with optimal DS-EPS volume of 10mL. The rapid start-up strategy makes possible the application of anammox to practical engineering.

  17. Loop Heat Pipe Startup Behaviors

    NASA Technical Reports Server (NTRS)

    Ku, Jentung

    2016-01-01

    A loop heat pipe must start successfully before it can commence its service. The startup transient represents one of the most complex phenomena in the loop heat pipe operation. This paper discusses various aspects of loop heat pipe startup behaviors. Topics include the four startup scenarios, the initial fluid distribution between the evaporator and reservoir that determines the startup scenario, factors that affect the fluid distribution between the evaporator and reservoir, difficulties encountered during the low power startup, and methods to enhance the startup success. Also addressed are the pressure spike and pressure surge during the startup transient, and repeated cycles of loop startup and shutdown under certain conditions.

  18. Loop Heat Pipe Startup Behaviors

    NASA Technical Reports Server (NTRS)

    Ku, Jentung

    2014-01-01

    A loop heat pipe must start successfully before it can commence its service. The start-up transient represents one of the most complex phenomena in the loop heat pipe operation. This paper discusses various aspects of loop heat pipe start-up behaviors. Topics include the four start-up scenarios, the initial fluid distribution between the evaporator and reservoir that determines the start-up scenario, factors that affect the fluid distribution between the evaporator and reservoir, difficulties encountered during the low power start-up, and methods to enhance the start-up success. Also addressed are the thermodynamic constraint between the evaporator and reservoir in the loop heat pipe operation, the superheat requirement for nucleate boiling, pressure spike and pressure surge during the start-up transient, and repeated cycles of loop start-up andshutdown under certain conditions.

  19. DISP: Optimizations towards Scalable MPI Startup

    SciTech Connect

    Fu, Huansong; Pophale, Swaroop S; Gorentla Venkata, Manjunath; Yu, Weikuan

    2016-01-01

    Despite the popularity of MPI for high performance computing, the startup of MPI programs faces a scalability challenge as both the execution time and memory consumption increase drastically at scale. We have examined this problem using the collective modules of Cheetah and Tuned in Open MPI as representative implementations. Previous improvements for collectives have focused on algorithmic advances and hardware off-load. In this paper, we examine the startup cost of the collective module within a communicator and explore various techniques to improve its efficiency and scalability. Accordingly, we have developed a new scalable startup scheme with three internal techniques, namely Delayed Initialization, Module Sharing and Prediction-based Topology Setup (DISP). Our DISP scheme greatly benefits the collective initialization of the Cheetah module. At the same time, it helps boost the performance of non-collective initialization in the Tuned module. We evaluate the performance of our implementation on Titan supercomputer at ORNL with up to 4096 processes. The results show that our delayed initialization can speed up the startup of Tuned and Cheetah by an average of 32.0% and 29.2%, respectively, our module sharing can reduce the memory consumption of Tuned and Cheetah by up to 24.1% and 83.5%, respectively, and our prediction-based topology setup can speed up the startup of Cheetah by up to 80%.

  20. The Role of Startups

    SciTech Connect

    Babinec, Sue

    2015-02-11

    Many ARPA-E-funded universities and research institutions have created start-up companies to further catalyze their next-generation technologies. Ambri and BlackPak are two examples of ARPA-E projects that were spun out by other institutions—Massachusetts Institute of Technology and SRI International, respectively—in an effort to get their technologies out of the lab and into the market quickly. This video features remarks from ARPA-E Senior Commercialization Advisor Sue Babinec and interviews with technologists at Ambri and BlackPak, who each tell the story of how their new companies spun out of the lab and have become agile startups capable of delivering real products to the marketplace.

  1. The Role of Startups

    ScienceCinema

    Babinec, Sue

    2016-07-12

    Many ARPA-E-funded universities and research institutions have created start-up companies to further catalyze their next-generation technologies. Ambri and BlackPak are two examples of ARPA-E projects that were spun out by other institutions—Massachusetts Institute of Technology and SRI International, respectively—in an effort to get their technologies out of the lab and into the market quickly. This video features remarks from ARPA-E Senior Commercialization Advisor Sue Babinec and interviews with technologists at Ambri and BlackPak, who each tell the story of how their new companies spun out of the lab and have become agile startups capable of delivering real products to the marketplace.

  2. Genetic Counselors in Startup Companies: Redefining the Genetic Counselor Role.

    PubMed

    Rabideau, Marina M; Wong, Kenny; Gordon, Erynn S; Ryan, Lauren

    2016-08-01

    Genetic counselors (GCs) have recently begun moving into non-clinic based roles in increasing numbers. A relatively new role for GCs is working for startup companies. Startups are newly established companies in the phase of developing and researching new scalable businesses. This article explores the experiences of four GCs working at different startup companies and aims to provide resources for GCs interested in learning more about these types of roles. The article describes startup culture, including a relatively flat organizational structure, quick product iterations, and flexibility, among other unique cultural characteristics. Financial considerations are described, including how to understand and evaluate a company's financial status, along with a brief explanation of alternate forms of compensation including stock options and equity. Specifically, the article details the uncertainties and rewards of working in a fast-paced startup environment that affords opportunities to try new roles and use the genetic counseling skill set in new ways. This article aims to aid GCs in determining whether a startup environment would be a good fit, learning how to evaluate a specific startup, and understanding how to market themselves for positions at startups.

  3. FFTF startup: status and results

    SciTech Connect

    Noordhoff, B.H.; Moore, C.E.

    1980-03-01

    Startup testing on the Fast Flux Test Facility (FFTF) during the past three years has progressed beyond initial criticality toward the principal goal of power demonstration in 1980. An overview is presented of technical results to date and project plans to achieve power demonstration and complete the startup test program.

  4. Challenges for Success in Startups

    NASA Astrophysics Data System (ADS)

    Spitzer, Richard

    2000-03-01

    The basic challenges to a startup company such as IME have stemmed from the need to balance the business world's goal of fast entry into the market place with the necessity for a solid foundation in technology. Our technology base is broad - indeed it has the makings of a new industry - and the lure of quick commercial success in a specific application could easily make IME vulnerable to the R&D might of giant international companies. The essential challenges for success play out in business/technology decision tradeoffs: (i) preserving equity and viability while keeping R&D momentum and establishing intellectual property, (ii) attracting investors while maintaining focus on long-range goals, and (iii) developing a complete team while protecting capital resources. This balancing act keeps the company agile and resilient, qualities that large corporations could emulate with profit.

  5. Startup, Shutdown, & Malfunction (SSM) Emissions

    EPA Pesticide Factsheets

    EPA issued a final action to ensure states have plans in place that are fully consistent with the Clean Air Act and recent court decisions concerning startup, shutdown and malfunction (SSM) operations.

  6. Rightpollex: From Patent To Startup

    NASA Astrophysics Data System (ADS)

    Leba, Monica; Ionica, Andreea Cristina; Dobra, Remus

    2015-07-01

    RightPollex is an innovative product patented and developed by a multidisciplinary team from the University of Petrosani. The paper presents not only the idea and implementation possibilities of this patent, but also the current stage on the path towards the development of startups, an initiative of our university together with a private investor. The result of this initiative is JV Sensor Ventures that supports several startups.

  7. Having your cake and eating it too; effective engagement in start-ups from an academic seat

    NASA Astrophysics Data System (ADS)

    Mirkin, Chad

    2012-02-01

    In order for scientific advances to have a positive impact on society, they must be successfully transitioned from conceptually fundamental endeavors in academic research laboratories to valuable enabling technologies at start-up companies. Nanosphere, NanoInk, and AuraSense are three start-up companies that have been spun out of Northwestern based on research initiated in my laboratory. These companies are focused on commercializing nanotechnology-based applications in the life science and semiconductor industries and have turned discoveries from my lab into viable commercial products. For example, several of the systems developed at these start-ups are in the clinical trial phase, with one already approved by the FDA, and they are poised to have a positive world-wide impact. Herein, I discuss the challenges associated with identifying commercial value in academic research projects, securing intellectual property, forming a company as a legal entity, and locating sources of start-up funds. Further, I will discuss the rewards of venturing into such enterprises and the ways of ensuring a start-up company's long-term success, while juggling the numerous responsibilities of an academic seat. I argue that these two activities are done not in competition, but rather are integral for driving the type of high-level, synergistic scientific research that is being done today.

  8. Defense waste processing facility startup progress report

    SciTech Connect

    Iverson, D.C.; Elder, H.H.

    1992-01-01

    The Savannah River Site (SRS) has been operating a nuclear fuel cycle since the 1950's to produce nuclear materials in support of the national defense effort. About 83 million gallons of high level waste produced since operation began have been consolidated into 33 million gallons by evaporation at the waste tank farm. The Department of Energy has authorized the construction of the Defense Waste Processing Facility (DWPF) to immobilize the waste as a durable borosilicate glass contained in stainless steel canisters, prior to emplacement in a federal repository. The DWPF is now mechanically complete and undergoing commissioning and run-in activities. Cold startup testing using simulated non-radioactive feeds is scheduled to begin in November 1992 with radioactive operation scheduled to begin in May 1994. While technical issues have been identified which can potentially affect DWPF operation, they are not expected to negatively impact the start of non-radioactive startup testing.

  9. Defense waste processing facility startup progress report

    SciTech Connect

    Iverson, D.C.; Elder, H.H.

    1992-07-01

    The Savannah River Site (SRS) has been operating a nuclear fuel cycle since the 1950`s to produce nuclear materials in support of the national defense effort. About 83 million gallons of high level waste produced since operation began have been consolidated into 33 million gallons by evaporation at the waste tank farm. The Department of Energy has authorized the construction of the Defense Waste Processing Facility (DWPF) to immobilize the waste as a durable borosilicate glass contained in stainless steel canisters, prior to emplacement in a federal repository. The DWPF is now mechanically complete and undergoing commissioning and run-in activities. Cold startup testing using simulated non-radioactive feeds is scheduled to begin in November 1992 with radioactive operation scheduled to begin in May 1994. While technical issues have been identified which can potentially affect DWPF operation, they are not expected to negatively impact the start of non-radioactive startup testing.

  10. University Start-ups: A Better Business Model

    NASA Astrophysics Data System (ADS)

    Dehn, J.; Webley, P. W.

    2015-12-01

    Many universities look to start-up companies as a way to attract faculty, supporting research and students as traditional federal sources become harder to come by. University affiliated start-up companies can apply for a broader suite of grants, as well as market their services to a broad customer base. Often university administrators see this as a potential panacea, but national statistics show this is not the case. Rarely do universities profit significantly from their start-ups. With a success rates of around 20%, most start-ups end up costing the university money as well as faculty-time. For the faculty, assuming they want to continue in academia, a start-up is often unattractive because it commonly leads out of academia. Running a successful business as well as maintaining a strong teaching and research load is almost impossible to do at the same time. Most business models and business professionals work outside of academia, and the models taught in business schools do not merge well in a university environment. To mitigate this a new business model is proposed where university start-ups are aligned with the academic and research missions of the university. A university start-up must work within the university, directly support research and students, and the work done maintaining the business be recognized as part of the faculty member's university obligations. This requires a complex conflict of interest management plan and for the companies to be non-profit in order to not jeopardize the university's status. This approach may not work well for all universities, but would be ideal for many to conserve resources and ensure a harmonious relationship with their start-ups and faculty.

  11. The Start-Up, Evolution and Impact of a Research Group in a University Developing Its Knowledge Base

    ERIC Educational Resources Information Center

    Horta, Hugo; Martins, Rui

    2014-01-01

    This article focuses on the understudied role of research groups contributing to develop the knowledge base of developing universities in regions lagging behind in human, financial and scientific resources. We analyse the evolution of a research group that, in less than 10 years, achieved worldwide recognition in the field of microelectronics,…

  12. Influence of dissolved oxygen concentration on the start-up of the anammox-based process: ELAN®.

    PubMed

    Morales, N; Val del Río, A; Vázquez-Padín, J R; Gutiérrez, R; Fernández-González, R; Icaran, P; Rogalla, F; Campos, J L; Méndez, R; Mosquera-Corral, A

    2015-01-01

    The anammox-based process ELAN® was started-up in two different sequencing batch reactor (SBR) pilot plant reactors treating municipal anaerobic digester supernatant. The main difference in the operation of both reactors was the dissolved oxygen (DO) concentration in the bulk liquid. SBR-1 was started at a DO value of 0.4 mg O2/L whereas SBR-2 was started at DO values of 3.0 mg O2/L. Despite both reactors working at a nitrogen removal rate of around 0.6 g N/(L d), in SBR-1, granules represented only a small fraction of the total biomass and reached a diameter of 1.1 mm after 7 months of operation, while in SBR-2 the biomass was mainly composed of granules with an average diameter of 3.2 mm after the same operational period. Oxygen microelectrode profiling revealed that granules from SBR-2 where only fully penetrated by oxygen with DO concentrations of 8 mg O2/L while granules from SBR-1 were already oxygen penetrated at DO concentrations of 1 mg O2/L. In this way granules from SBR-2 performed better due to the thick layer of ammonia oxidizing bacteria, which accounted for up to 20% of all the microbial populations, which protected the anammox bacteria from non-suitable liquid media conditions.

  13. An enhanced tokamak startup model

    NASA Astrophysics Data System (ADS)

    Goswami, Rajiv; Artaud, Jean-François

    2017-01-01

    The startup of tokamaks has been examined in the past in varying degree of detail. This phase typically involves the burnthrough of impurities and the subsequent rampup of plasma current. A zero-dimensional (0D) model is most widely used where the time evolution of volume averaged quantities determines the detailed balance between the input and loss of particle and power. But, being a 0D setup, these studies do not take into consideration the co-evolution of plasma size and shape, and instead assume an unchanging minor and major radius. However, it is known that the plasma position and its minor radius can change appreciably as the plasma evolves in time to fill in the entire available volume. In this paper, an enhanced model for the tokamak startup is introduced, which for the first time takes into account the evolution of plasma geometry during this brief but highly dynamic period by including realistic one-dimensional (1D) effects within the broad 0D framework. In addition the effect of runaway electrons (REs) has also been incorporated. The paper demonstrates that the inclusion of plasma cross section evolution in conjunction with REs plays an important role in the formation and development of tokamak startup. The model is benchmarked against experimental results from ADITYA tokamak.

  14. Successful IT Start-Ups' HRD Practices: Four Cases in South Korea

    ERIC Educational Resources Information Center

    Cho, Yonjoo; McLean, Gary N.

    2009-01-01

    Purpose: The purpose of this paper is to identify South Korea's successful IT start-ups' HRD practices to determine whether there are steps that must be taken to maintain their HRD expertise for continued growth. Design/methodology/approach: A case study approach employing four fast-growing IT start-up cases was undertaken based on semi-structured…

  15. Trends in the Crowdfunding of Educational Technology Startups

    ERIC Educational Resources Information Center

    Antonenko, Pavlo D.; Lee, Brenda R.; Kleinheksel, A. J.

    2014-01-01

    This article presents an analysis of active crowdfunding campaigns posted on ten crowdfunding platforms in May 2013 to provide a glimpse of the recent trends in the crowdfunding of educational technology startups. We describe the characteristics of the most successful crowdfunding campaigns in educational technology and identify the most popular…

  16. A Rational Business Startup Model

    NASA Astrophysics Data System (ADS)

    Chang, Milton

    2000-03-01

    The speaker will share his experience in starting high-tech companies using a low-risk startup model. Most technical people can use this approach to start a company that begins with a modest initial goal and grows the business over time. As the company builds infrastructure and the individuals gain experience, the ability to pursue big opportunities comes naturally. The result is more likely to be a company with a long-term vision, and with the management team retaining more of the ownership.

  17. Start-up analysis for marketing strategy.

    PubMed

    Griffith, M J; Baloff, N

    1984-01-01

    The complex start-up effect on utilization of health care services is too often overlooked or underestimated by marketing planners, leading to a range of negative consequences for both the users of services and the provider organization. Start-up analysis allows accurate estimation of these utilization effects for coordinated strategic planning among marketing finance, and operations.

  18. When Do Start-Ups Make Sense?

    ERIC Educational Resources Information Center

    Langemeyer, Clement J.

    2005-01-01

    The start-up has received considerable attention in the last few years. While the National Research Council of Canada has generated many start-ups over its 88-year history, the creation of a formal entrepreneurship programme in the mid-1990s dramatically accelerated the pace at which they were created. Many factors come into play in the decision…

  19. Cone penetrometer demonstration standard startup review checklist

    SciTech Connect

    KRIEG, S.A.

    1998-11-09

    Startup readiness for the Cone Penetrometer Demonstration in AX Tank Farm will be verified through the application of a Standard Startup Review Checklist. This is a listing of those items essential to demonstrating readiness to start the Cone Penetrometer Demonstration in AX Tank Farm.

  20. Monte Carlo simulations to support start-up and treatment planning of scanned proton and carbon ion therapy at a synchrotron-based facility

    NASA Astrophysics Data System (ADS)

    Parodi, K.; Mairani, A.; Brons, S.; Hasch, B. G.; Sommerer, F.; Naumann, J.; Jäkel, O.; Haberer, T.; Debus, J.

    2012-06-01

    Reliable treatment planning of highly conformal scanned ion beam therapy demands accurate tools for the determination and characterization of the individual pencil-like beams building up the integral dose delivery and related mixed radiation field. At present, clinically practicable inverse treatment planning systems (TPSs) can only rely on fast-performing analytical algorithms. However, the rapidly emerging though more computationally intensive Monte Carlo (MC) methods can be employed to complement analytical TPS, e.g., via accurate calculations of the input beam-model data, together with a considerable reduction of the measuring time. Here we present the work done for the application of the FLUKA MC code to support several aspects of scanned ion beam delivery and treatment planning at the Heidelberg Ion Beam Therapy Center (HIT). Emphasis is given to the generation of the accelerator library and of experimentally validated TPS input basic data which are now in clinical use for proton and carbon ion therapy. Additionally, MC dose calculations of planned treatments in water are shown to represent a valuable tool for supporting treatment plan verification in comparison to dosimetric measurements. This paper can thus provide useful information and guidelines for the start-up and clinical operation of forthcoming ion beam therapy facilities similar to HIT.

  1. 40 CFR 63.1111 - Startup, shutdown, and malfunction.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 10 2010-07-01 2010-07-01 false Startup, shutdown, and malfunction. 63... Control Technology Standards § 63.1111 Startup, shutdown, and malfunction. (a) Startup, shutdown, and... develop a written startup, shutdown, and malfunction plan that describes, in detail, procedures...

  2. 40 CFR 63.1111 - Startup, shutdown, and malfunction.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 10 2011-07-01 2011-07-01 false Startup, shutdown, and malfunction. 63... Control Technology Standards § 63.1111 Startup, shutdown, and malfunction. (a) Startup, shutdown, and... develop a written startup, shutdown, and malfunction plan that describes, in detail, procedures...

  3. Mathematical modeling and analysis of heat pipe start-up from the frozen state

    NASA Technical Reports Server (NTRS)

    Jang, Jong Hoon; Faghri, Amir; Chang, Won Soon; Mahefkey, Edward T.

    1989-01-01

    The start-up process of a frozen heat pipe is described and a complete mathematical model for the start-up of the frozen heat pipe is developed based on the existing experimental data, which is simplified and solved numerically. The two-dimensional transient model for the wall and wick is coupled with the one-dimensional transient model for the vapor flow when vaporization and condensation occur at the interface. A parametric study is performed to examine the effect of the boundary specification at the surface of the outer wall on the successful start-up from the frozen state. For successful start-up, the boundary specification at the outer wall surface must melt the working substance in the condenser before dry-out takes place in the evaporator.

  4. Aeroelastic Modeling of a Nozzle Startup Transient

    NASA Technical Reports Server (NTRS)

    Wang, Ten-See; Zhao, Xiang; Zhang, Sijun; Chen, Yen-Sen

    2014-01-01

    Lateral nozzle forces are known to cause severe structural damage to any new rocket engine in development during test. While three-dimensional, transient, turbulent, chemically reacting computational fluid dynamics methodology has been demonstrated to capture major side load physics with rigid nozzles, hot-fire tests often show nozzle structure deformation during major side load events, leading to structural damages if structural strengthening measures were not taken. The modeling picture is incomplete without the capability to address the two-way responses between the structure and fluid. The objective of this study is to develop a tightly coupled aeroelastic modeling algorithm by implementing the necessary structural dynamics component into an anchored computational fluid dynamics methodology. The computational fluid dynamics component is based on an unstructured-grid, pressure-based computational fluid dynamics formulation, while the computational structural dynamics component is developed under the framework of modal analysis. Transient aeroelastic nozzle startup analyses at sea level were performed, and the computed transient nozzle fluid-structure interaction physics presented,

  5. SOP 98-5 brings uniformity to reporting start-up costs.

    PubMed

    Luecke, R W; Meeting, D T

    1999-08-01

    The American Institute of Certified Public Accountants (AICPA) issued Statement of Position (SOP) No. 98-5, Reporting on the Costs of Start-Up Activities, in April 1998 to provide organizations with guidance on how to report start-up and organization costs. Because some companies were expensing start-up costs while other companies were capitalizing start-up costs with a variety of periods over which to amortize costs, it was difficult to compare companies' financial statements. SOP No. 98-5 will bring uniformity to the treatment of start-up and organization costs by dictating that these costs be expensed as incurred. AICPA's Accounting Standards Executive Committee adopted an intentionally broad definition of start-up costs to capture the vast majority of costs associated with starting up an organization. SOP No. 98-5 takes effect for financial statements for fiscal years beginning after December 15, 1998, but can be applied earlier for fiscal years for which financial statements have not been issued.

  6. Thermophilic anaerobic digestion of source-sorted organic fraction of household municipal solid waste: start-up procedure for continuously stirred tank reactor.

    PubMed

    Angelidaki, Irini; Chen, Xingxing; Cui, Junbo; Kaparaju, Prasad; Ellegaard, Lars

    2006-08-01

    Two feeding strategies for start-up of continuously stirred tank reactors (CSTR) treating source-sorted organic fraction of household municipal solid waste (SS-OFMSW) at 55 degrees C were evaluated. Two reactors were started up separately with a limited amount of initial inoculum (i.e. 10% of the final volume of 3.5l) and operated in a fed batch mode until the reactors were filled (30 days). A reference reactor was filled up with 3.5l of inoculum and fed at a constant rate (11.4 g volatile solids (VS)/d). Loading at progressively increasing rate (from 1.7 to 15 gVS/d), as calculated based on an activated biomass concept, showed superior process performance compared to a fixed feed rate (5.7 gVS/d). Methane yield of 0.32 m(3)/kg VS was produced during the start-up in reactor filled at progressively increasing rate and was comparable to the reference reactor. On the contrary, significant inhibition due to volatile fatty acid (VFA) build-up, mainly due to butyrate, was noticed in the reactor filled at constant rate. Thus, low initial and progressive increasing inoculum loading rate could be used as a strategy for a successful start-up of CSTR treating SS-OFMSW as it allowed a gradual acclimation of the biomass. Lab-scale results were further reaffirmed from the start-up of a full-scale plant (7000 m(3) total capacity) which was supplied with inoculum corresponding to approx. 16% of final volume and operated in a fed batch mode until the reactors were filled (58 days). Stable biogas production with low VFA (<3 g/L; based on titration method) were noticed during the start-up period when fed at progressively increasing rate. Thus, a controlled and reliable start-up procedure was found essential, which could allow rapid process stabilization and time to focus on other technical aspects of plant operation. In addition, the influence of substrate to inoculum amount (1.5-30% TS) and temperature (5-65 degrees C) on anaerobic degradation and methane production of SS-OFMSW was

  7. Phase Startup Initiative Phases 3 and 4 Test Plan and Test Specification ( OCRWM)

    SciTech Connect

    PAJUNEN, A.L.; LANGEVIN, M.J.

    2000-08-07

    Construction for the Spent Nuclear Fuel (SNF) Project facilities is continuing per the Level III Baseline Schedule, and installation of the Fuel Retrieval System (FRS) and Integrated Water Treatment System (IWTS) in K West Basin is now complete. In order to accelerate the project, a phased start up strategy to initiate testing of the FRS and IWTS early in the overall project schedule was proposed (Williams 1999). Wilkinson (1999) expands the definition of the original proposal into four functional testing phases of the Phased Startup Initiative (PSI). Phases 1 and 2 are based on performing functional tests using dummy fuel. This test plan provides overall guidance for Phase 3 and 4 tests, which are performed using actual irradiated N fuel assemblies. The overall objective of the Phase 3 and 4 testing is to verify how the FRS and IWTS respond while processing actual fuel. Conducting these tests early in the project schedule will allow identification and resolution of equipment and process problems before they become activities on the start-up critical path. The specific objectives of this test plan are to: Define the Phase 3 and 4 test scope for the FRS and IWTS; Provide detailed test requirements that can be used to write the specific test procedures; Define data required and measurements to be taken. Where existing methods to obtain these do not exist, enough detail will be provided to define required additional equipment; and Define specific test objectives and acceptance criteria.

  8. Phased Startup Initiative Phases 3 and 4 Test Plan and Test Specification (OCRWM)

    SciTech Connect

    PITNER, A.L.

    2000-02-28

    Construction for the Spent Nuclear Fuel (SNF) Project facilities is continuing per the Level III Baseline Schedule, and installation of the Fuel Retrieval System (FRS) and Integrated Water Treatment System (IWTS) in K West Basin is now complete. In order to accelerate the project, a phased start up strategy to initiate testing of the FRS and IWTS early in the overall project schedule was proposed (Williams 1999). Wilkinson (1999) expands the definition of the original proposal into four functional testing phases of the Phased Startup Initiative (PSI). Phases 1 and 2 are based on performing functional tests using dummy fuel. These tests are described in separate planning documents. This test plan provides overall guidance for Phase 3 and 4 tests, which are performed using actual irradiated N fuel assemblies. The overall objective of the Phase 3 and 4 testing is to verify how the FRS and IWTS respond while processing actual fuel. Conducting these tests early in the project schedule will allow identification and resolution of equipment and process problems before they become activities on the start-up critical path. The specific objectives of this test plan are to: (1) Define the test scope for the FRS and IWTS; (2) Provide detailed test requirements that can be used to write the specific test procedures; (3) Define data required and measurements to be taken. Where existing methods to obtain these do not exist, enough detail will be provided to define required additional equipment; and (4) Define specific test objectives and acceptance criteria.

  9. Mixed Stream Test Rig (MISTER) Startup Report

    SciTech Connect

    Charles Park

    2011-02-01

    This report describes the work accomplished to date to design, procure, assemble, authorize, and startup the Mixed Stream Test Rig (MISTER) at the Idaho National Laboratory (INL). It describes the reasons for establishing this capability, physical configuration of the test equipment, operations methodology, initial success, and plans for completing the initial 1,000 hour test.

  10. Startup Hopefuls Test Their Ideas with Educators

    ERIC Educational Resources Information Center

    Tomassini, Jason

    2012-01-01

    "Educator day" is one of the most important and nerve-racking for the people taking part in Imagine K12, the biggest incubator program in the United States specifically for education technology startups. Many entrepreneurs in K-12 believe technology can solve education's problems, but don't work to understand those problems before prescribing…

  11. 20 CFR 632.254 - Program startup.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Program startup. 632.254 Section 632.254 Employees' Benefits EMPLOYMENT AND TRAINING ADMINISTRATION, DEPARTMENT OF LABOR INDIAN AND NATIVE AMERICAN EMPLOYMENT AND TRAINING PROGRAMS Summer Youth Employment and Training Programs § 632.254 Program...

  12. 20 CFR 632.254 - Program startup.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 20 Employees' Benefits 3 2011-04-01 2011-04-01 false Program startup. 632.254 Section 632.254 Employees' Benefits EMPLOYMENT AND TRAINING ADMINISTRATION, DEPARTMENT OF LABOR INDIAN AND NATIVE AMERICAN EMPLOYMENT AND TRAINING PROGRAMS Summer Youth Employment and Training Programs § 632.254 Program...

  13. Light duty utility arm startup plan

    SciTech Connect

    Barnes, G.A.

    1998-09-01

    This plan details the methods and procedures necessary to ensure a safe transition in the operation of the Light Duty Utility Arm (LDUA) System. The steps identified here outline the work scope and identify responsibilities to complete startup, and turnover of the LDUA to Characterization Project Operations (CPO).

  14. 40 CFR 61.09 - Notification of startup.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 8 2011-07-01 2011-07-01 false Notification of startup. 61.09 Section...) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS General Provisions § 61.09 Notification of startup. (a) The owner or operator of each stationary source which has an initial startup after the...

  15. 40 CFR 63.1272 - Startups, shutdowns, and malfunctions.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 11 2011-07-01 2011-07-01 false Startups, shutdowns, and malfunctions... Facilities § 63.1272 Startups, shutdowns, and malfunctions. (a) The provisions set forth in this subpart shall apply at all times except during startups or shutdowns, during malfunctions, and during periods...

  16. 40 CFR 61.09 - Notification of startup.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 8 2010-07-01 2010-07-01 false Notification of startup. 61.09 Section...) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS General Provisions § 61.09 Notification of startup. (a) The owner or operator of each stationary source which has an initial startup after the...

  17. 40 CFR 63.1272 - Startups, shutdowns, and malfunctions.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 11 2010-07-01 2010-07-01 true Startups, shutdowns, and malfunctions... Facilities § 63.1272 Startups, shutdowns, and malfunctions. (a) The provisions set forth in this subpart shall apply at all times except during startups or shutdowns, during malfunctions, and during periods...

  18. 40 CFR 68.77 - Pre-startup review.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 15 2011-07-01 2011-07-01 false Pre-startup review. 68.77 Section 68...) CHEMICAL ACCIDENT PREVENTION PROVISIONS Program 3 Prevention Program § 68.77 Pre-startup review. (a) The owner or operator shall perform a pre-startup safety review for new stationary sources and for...

  19. 40 CFR 63.762 - Startups, shutdowns, and malfunctions.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 10 2011-07-01 2011-07-01 false Startups, shutdowns, and malfunctions... Facilities § 63.762 Startups, shutdowns, and malfunctions. (a) The provisions set forth in this subpart shall apply at all times except during startups or shutdowns, during malfunctions, and during periods of...

  20. 40 CFR 63.762 - Startups, shutdowns, and malfunctions.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 10 2010-07-01 2010-07-01 false Startups, shutdowns, and malfunctions... Facilities § 63.762 Startups, shutdowns, and malfunctions. (a) The provisions set forth in this subpart shall apply at all times except during startups or shutdowns, during malfunctions, and during periods of...

  1. 40 CFR 68.77 - Pre-startup review.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 15 2010-07-01 2010-07-01 false Pre-startup review. 68.77 Section 68...) CHEMICAL ACCIDENT PREVENTION PROVISIONS Program 3 Prevention Program § 68.77 Pre-startup review. (a) The owner or operator shall perform a pre-startup safety review for new stationary sources and for...

  2. EPA's Startup Crowdsourcing Tool for Community Activism

    EPA Pesticide Factsheets

    Demonstration and discussion of Urban Waters Mapper, an online mapping tool that allows community groups to share information about volunteer events and increase partnerships to achieve even more progress toward improving local and regional water quality.

  3. Impact of reactor configuration on anammox process start-up: MBR versus SBR.

    PubMed

    Tao, Yu; Gao, Da-Wen; Fu, Yuan; Wu, Wei-Min; Ren, Nan-Qi

    2012-01-01

    Anaerobic ammonium oxidation (anammox) is an energy saving biological nitrogen removal process which was limited to slow growth rate of anammox bacteria during start-up period. This study investigated the start-up of anammox process by a laboratory sequential batch reactor (SBR) for 218 days and subsequently modified the reactor as a membrane bioreactor (MBR) for 178 days. Modification of a SBR as MBR with installation of an external membrane module resulted in acceleration of specific anammox activity by 19 times. The acceleration of specific anammox activity with MBR was further confirmed by starting-up another MBR for a 242 day period. Molecular microbial analyses showed that Candidatus "Brocadia anammoxidans" and Candidatus "Kuenenia stuttgartiensis" were the dominant species in the inocula and biomass developed in the reactor. The start-up with MBR appeared to be more effective than SBR for the enrichment of anammox bacteria due to high sludge retention property of MBR configuration.

  4. Royal Society offers funds for technology start-ups

    NASA Astrophysics Data System (ADS)

    Clery, Daniel

    2008-04-01

    Scientists with a good idea ripe for commercial exploitation will no longer have to hawk their wares to bankers and private investors to get financial backing: the Royal Society is also about to get into the venture-capital business. The society is planning to set up an enterprise fund to buy equity in start-up companies based on outstanding technology - covering everything from renewable energy and carbon capture to water purification. "If there are difficulties getting science into the marketplace, the society has a role helping with that," says chemical physicist Andrew Mackintosh, a former chief executive of Oxford Instruments who has been brought in to manage the fund.

  5. Fuel Cell Power Model Version 2: Startup Guide, System Designs, and Case Studies. Modeling Electricity, Heat, and Hydrogen Generation from Fuel Cell-Based Distributed Energy Systems

    SciTech Connect

    Steward, D.; Penev, M.; Saur, G.; Becker, W.; Zuboy, J.

    2013-06-01

    This guide helps users get started with the U.S. Department of Energy/National Renewable Energy Laboratory Fuel Cell Power (FCPower) Model Version 2, which is a Microsoft Excel workbook that analyzes the technical and economic aspects of high-temperature fuel cell-based distributed energy systems with the aim of providing consistent, transparent, comparable results. This type of energy system would provide onsite-generated heat and electricity to large end users such as hospitals and office complexes. The hydrogen produced could be used for fueling vehicles or stored for later conversion to electricity.

  6. A 12 mV start-up converter using piezoelectric transformer for energy harvesting applications

    NASA Astrophysics Data System (ADS)

    Martinez, T.; Pillonnet, G.; Costa, F.

    2016-11-01

    This paper presents a novel topology of start-up converter for sub 100 mV thermal energy harvesting based on an Armstrong oscillator topology using a piezoelectric transformer (PT) and a normally-on MOSFET. Based on a Rosen-type PT and off-the-shelf components, the proposed startup topology begins to oscillate at 12 mV input voltage corresponding to a temperature gradient of 2°C and achieves 1 V output voltage with only 18 mV input voltage applied to the harvester.

  7. Life Sciences Start-ups in Switzerland: CTI and its Support for Young Entrepreneurs.

    PubMed

    Sekanina, Klara

    2014-12-01

    According to the Global Entrepreneurship Monitor 2013, perceived opportunities to start a business in Switzerland are high and rank above average compared to other innovation-based countries. 2013 was a record year for start-ups in Switzerland. Around 40,000 new businesses were recorded in the commercial register and the trend is set to continue. There are two main criteria that lead to success, particularly for science- or technology- based start-ups: first of all, it is the business or product idea itself, and secondly it is the entrepreneurial team. CTI is supporting innovation in a manner that responds to a need in the market identified by industry.

  8. Mathematical modelling of methanogenic reactor start-up: Importance of volatile fatty acids degrading population.

    PubMed

    Jabłoński, Sławomir J; Łukaszewicz, Marcin

    2014-12-01

    Development of balanced community of microorganisms is one of the obligatory for stable anaerobic digestion. Application of mathematical models might be helpful in development of reliable procedures during the process start-up period. Yet, the accuracy of forecast depends on the quality of input and parameters. In this study, the specific anaerobic activity (SAA) tests were applied in order to estimate microbial community structure. Obtained data was applied as input conditions for mathematical model of anaerobic digestion. The initial values of variables describing the amount of acetate and propionate utilizing microorganisms could be calculated on the basis of SAA results. The modelling based on those optimized variables could successfully reproduce the behavior of a real system during the continuous fermentation.

  9. Achieving and Sustaining New Knowledge Development in High-Expectation Start-Ups

    ERIC Educational Resources Information Center

    Matricano, Diego

    2010-01-01

    In markets characterized by strong competition, new knowledge and new knowledge development are generally recognized as the key means for an enterprise to gain competitive advantage. This knowledge-based competitive advantage is critical for all commercial ventures, but is especially so for high-expectation start-ups (technology-based ventures…

  10. Start-up control system and vessel for LMFBR

    DOEpatents

    Durrant, Oliver W.; Kakarala, Chandrasekhara R.; Mandel, Sheldon W.

    1987-01-01

    A reflux condensing start-up system comprises a steam generator, a start-up vessel connected parallel to the steam generator, a main steam line connecting steam outlets of the steam generator and start-up vessel to a steam turbine, a condenser connected to an outlet of the turbine and a feedwater return line connected between the condenser and inlets of the steam generator and start-up vessel. The start-up vessel has one or more heaters at the bottom thereof for heating feedwater which is supplied over a start-up line to the start-up vessel. Steam is thus generated to pressurize the steam generator before the steam generator is supplied with a heat transfer medium, for example liquid sodium, in the case of a liquid metal fast breeder reactor. The start-up vessel includes upper and lower bulbs with a smaller diameter mid-section to act as water and steam reservoirs. The start-up vessel can thus be used not only in a start-up operation but as a mixing tank, a water storage tank and a level control at low loads for controlling feedwater flow.

  11. Start-up control system and vessel for LMFBR

    DOEpatents

    Durrant, Oliver W.; Kakarala, Chandrasekhara R.; Mandel, Sheldon W.

    1987-01-01

    A reflux condensing start-up system includes a steam generator, a start-up vessel connected parallel to the steam generator, a main steam line connecting steam outlets of the steam generator and start-up vessel to a steam turbine, a condenser connected to an outlet of the turbine and a feedwater return line connected between the condenser and inlets of the steam generator and start-up vessel. The start-up vessel has one or more heaters at the bottom thereof for heating feedwater which is supplied over a start-up line to the start-up vessel. Steam is thus generated to pressurize the steam generator before the steam generator is supplied with a heat transfer medium, for example liquid sodium, in the case of a liquid metal fast breeder reactor. The start-up vessel includes upper and lower bulbs with a smaller diameter mid-section to act as water and steam reservoirs. The start-up vessel can thus be used not only in a start-up operation but as a mixing tank, a water storage tank and a level control at low loads for controlling feedwater flow.

  12. Start-up performance of Anammox process in a fixed bed reactor (FBR) filled with honeycomb-like polypropylene carriers.

    PubMed

    Wang, Tao; Shen, Boxiong; Zhang, Sha; Wang, Zhiqiang; Tian, Li

    2016-01-01

    Novel honeycomb-like carriers, made of polypropylene, were applied to enhance biomass retention capacity so as to improve Anammox start-up performance in a fixed bed reactor (FBR). The reactor was operated for 3 months. On day 45, Anammox activity appeared. After 61 days' operation, the removal efficiencies of ammonium and nitrite were both over 91% based on 70 mg N L(-1) of the influent ammonium and influent nitrite, indicating that a remarkable Anammox activity was attained. A final specific Anammox activity of 0.12 g NH4(+)-N gVSS(-1) d(-1) was reached (VSS: volatile suspended solids). The FBR showed a good capacity for resisting shock loading and was more able to resist shock loading of nitrogen concentration than resist hydraulic shock loading. Phylogenetic analysis showed that Candidatus Brocadia anammoxidans' and Candidatus Kuenenia stuttgartiensis' were detected in the mature biofilm, and Candidatus Brocadia anammoxidans' was the dominant Anammox strain. Candidatus Kuenenia stuttgartiensis' played a positive role in the reactor performance, as it could consumed nitrite quickly and efficiently so as to avoid an adverse effect of temporary nitrite accumulation. The results showed that the honeycomb-like carriers were suitable for start-up of Anammox.

  13. Emissions of polychlorinated diphenyl ethers from a municipal solid waste incinerator during the start-up operation.

    PubMed

    Yang, Jing-Sing; Lin, Sheng-Lun; Lin, Ta-Chang; Wu, Yee-Lin; Wang, Lin-Chi; Chang-Chien, Guo-Ping

    2015-12-15

    This study examines the emissions of polychlorinated diphenyl ethers (PCDEs) during the start-up processes of a municipal solid waste incinerator (MSWI). Both normal and modified emission control start-ups were tested. Fifteen samples were taken from the flue gas with increasing furnace temperature. Peak PCDE concentrations of 1.48-10.3 ng/Nm(3) were observed at 8-11 h after the start of combustion, when the furnace temperature was in the range of 267-440 °C, that also needed for PCDD/F formation by de novo synthesis. The PCDE emissions could thus, be reduced by current control techniques. Furthermore, the modified control strategies inhibited PCDE formation at the beginning of combustion, and led to an 86% reduction in the maximum PCDE concentration. The overall start-up emissions were calculated as 1.01-3.08 mg, while the annual PCDE emissions with one start-up operation were found to be 7.48-9.64 mg. However, total PCDE emissions will increase by 12-69% if the number of start-up runs increases to between two and eight times per year. Consequently, the prevention of the unnecessary start-ups and advanced activation of the related emission control system are both efficient ways to reduce PCDE emissions.

  14. 30 CFR 56.14201 - Conveyor start-up warnings.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Conveyor start-up warnings. 56.14201 Section 56... Equipment Safety Practices and Operational Procedures § 56.14201 Conveyor start-up warnings. (a) When the entire length of a conveyor is visible from the starting switch, the conveyor operator shall...

  15. 30 CFR 57.14201 - Conveyor start-up warnings.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Conveyor start-up warnings. 57.14201 Section 57... Equipment Safety Practices and Operational Procedures § 57.14201 Conveyor start-up warnings. (a) When the entire length of a conveyor is visible from the starting switch, the conveyor operator shall...

  16. 30 CFR 57.14201 - Conveyor start-up warnings.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Conveyor start-up warnings. 57.14201 Section 57... Equipment Safety Practices and Operational Procedures § 57.14201 Conveyor start-up warnings. (a) When the entire length of a conveyor is visible from the starting switch, the conveyor operator shall...

  17. 30 CFR 56.14201 - Conveyor start-up warnings.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Conveyor start-up warnings. 56.14201 Section 56... Equipment Safety Practices and Operational Procedures § 56.14201 Conveyor start-up warnings. (a) When the entire length of a conveyor is visible from the starting switch, the conveyor operator shall...

  18. 30 CFR 57.14201 - Conveyor start-up warnings.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Conveyor start-up warnings. 57.14201 Section 57... Equipment Safety Practices and Operational Procedures § 57.14201 Conveyor start-up warnings. (a) When the entire length of a conveyor is visible from the starting switch, the conveyor operator shall...

  19. 30 CFR 57.14201 - Conveyor start-up warnings.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Conveyor start-up warnings. 57.14201 Section 57... Equipment Safety Practices and Operational Procedures § 57.14201 Conveyor start-up warnings. (a) When the entire length of a conveyor is visible from the starting switch, the conveyor operator shall...

  20. 30 CFR 56.14201 - Conveyor start-up warnings.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Conveyor start-up warnings. 56.14201 Section 56... Equipment Safety Practices and Operational Procedures § 56.14201 Conveyor start-up warnings. (a) When the entire length of a conveyor is visible from the starting switch, the conveyor operator shall...

  1. 30 CFR 56.14201 - Conveyor start-up warnings.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Conveyor start-up warnings. 56.14201 Section 56... Equipment Safety Practices and Operational Procedures § 56.14201 Conveyor start-up warnings. (a) When the entire length of a conveyor is visible from the starting switch, the conveyor operator shall...

  2. 30 CFR 56.14201 - Conveyor start-up warnings.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Conveyor start-up warnings. 56.14201 Section 56... Equipment Safety Practices and Operational Procedures § 56.14201 Conveyor start-up warnings. (a) When the entire length of a conveyor is visible from the starting switch, the conveyor operator shall...

  3. 30 CFR 57.14201 - Conveyor start-up warnings.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Conveyor start-up warnings. 57.14201 Section 57... Equipment Safety Practices and Operational Procedures § 57.14201 Conveyor start-up warnings. (a) When the entire length of a conveyor is visible from the starting switch, the conveyor operator shall...

  4. Spatial Burnout in Water Reactors with Nonuniform Startup Distributions of Uranium and Boron

    NASA Technical Reports Server (NTRS)

    Fox, Thomas A.; Bogart, Donald

    1955-01-01

    Spatial burnout calculations have been made of two types of water moderated cylindrical reactor using boron as a burnable poison to increase reactor life. Specific reactors studied were a version of the Submarine Advanced Reactor (sAR) and a supercritical water reactor (SCW) . Burnout characteristics such as reactivity excursion, neutron-flux and heat-generation distributions, and uranium and boron distributions have been determined for core lives corresponding to a burnup of approximately 7 kilograms of fully enriched uranium. All reactivity calculations have been based on the actual nonuniform distribution of absorbers existing during intervals of core life. Spatial burnout of uranium and boron and spatial build-up of fission products and equilibrium xenon have been- considered. Calculations were performed on the NACA nuclear reactor simulator using two-group diff'usion theory. The following reactor burnout characteristics have been demonstrated: 1. A significantly lower excursion in reactivity during core life may be obtained by nonuniform rather than uniform startup distribution of uranium. Results for SCW with uranium distributed to provide constant radial heat generation and a core life corresponding to a uranium burnup of 7 kilograms indicated a maximum excursion in reactivity of 2.5 percent. This compared to a maximum excursion of 4.2 percent obtained for the same core life when w'anium was uniformly distributed at startup. Boron was incorporated uniformly in these cores at startup. 2. It is possible to approach constant radial heat generation during the life of a cylindrical core by means of startup nonuniform radial and axial distributions of uranium and boron. Results for SCW with nonuniform radial distribution of uranium to provide constant radial heat generation at startup and with boron for longevity indicate relatively small departures from the initially constant radial heat generation distribution during core life. Results for SAR with a sinusoidal

  5. Evaluation of UASB reactor performance during start-up operation using synthetic mixed-acid waste.

    PubMed

    Vadlani, P V; Ramachandran, K B

    2008-11-01

    A start-up experiment was performed in a laboratory-scale, upflow anaerobic sludge blanket (UASB) reactor using seed sludge from a domestic waste treatment plant at 3.8-33.3gCODl(-1)day(-1) loading rates. Analysis over the height of the reactor with time showed that the VSS in the reactor was initially differentiated into active and non-active biomass at increasing gas production and upflow velocities, and specific update rates of the volatile fatty acids (VFA) components were pronounced at the bottom 10% of the reactor. During start-up, specific methanogenic activity and chemical oxygen demand (COD) uptake rate increased from 0.075 to 0.75gCOD-CH4(gVSS)(-1)day(-1) and from 0.08 to 0.875gCOD removed (gVSS)(-1)day(-1), respectively. When seed sludge from a distillery waste treatment plant was used, improved performance due to a predominance of active biomass was evident when the loading rate was increased from 9.4 to 28.7gCODl(-1)day(-1). The proposed start-up evaluation is an effective tool to successfully monitor performance of UASB reactors.

  6. 45 CFR 309.16 - What rules apply to start-up funding?

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 45 Public Welfare 2 2011-10-01 2011-10-01 false What rules apply to start-up funding? 309.16... Procedures § 309.16 What rules apply to start-up funding? (a) The application for start-up funding under...-quarter estimate of expenditures for the start-up period; (ii) Notification of whether the Tribe or...

  7. 45 CFR 309.16 - What rules apply to start-up funding?

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 45 Public Welfare 2 2010-10-01 2010-10-01 false What rules apply to start-up funding? 309.16... Procedures § 309.16 What rules apply to start-up funding? (a) The application for start-up funding under...-quarter estimate of expenditures for the start-up period; (ii) Notification of whether the Tribe or...

  8. USA/FBR program status FFTF operations startup experience

    SciTech Connect

    Moffitt, W.C.; Izatt, R.D.

    1981-06-01

    This paper gives highlights of the major Operations evaluations and operational results of the startup acceptance testing program and initiation of normal operating cycles for experiment irradiation in the FFTF. 33 figures. (DLC)

  9. Startup, Shutdown, & Malfunction (SSM) Emissions at Industrial Facilities

    EPA Pesticide Factsheets

    EPA issued a final action to ensure states have plans in place that are fully consistent with the Clean Air Act and recent court decisions concerning startup, shutdown and malfunction (SSM) operations.

  10. Rapid Start-up and Loading of an Attached Growth, Simultaneous Nitrification/Denitrification Membrane Aerated Bioreactor

    NASA Technical Reports Server (NTRS)

    Meyer, Caitlin E.; Pensinger, Stuart; Pickering, Karen D.; Barta, Daniel; Shull, Sarah A.; Vega, Letticia M.; Christenson, Dylan; Jackson, W. Andrew

    2015-01-01

    Membrane aerated bioreactors (MABR) are attached-growth biological systems used for simultaneous nitrification and denitrification to reclaim water from waste. This design is an innovative approach to common terrestrial wastewater treatments for nitrogen and carbon removal and implementing a biologically-based water treatment system for long-duration human exploration is an attractive, low energy alternative to physiochemical processes. Two obstacles to implementing such a system are (1) the "start-up" duration from inoculation to steady-state operations and (2) the amount of surface area needed for the biological activity to occur. The Advanced Water Recovery Systems (AWRS) team at JSC explored these two issues through two tests; a rapid inoculation study and a wastewater loading study. Results from these tests demonstrate that the duration from inoculation to steady state can be reduced to under two weeks, and that despite low ammonium removal rates, the MABRs are oversized.

  11. Liquid Tin Anode SOFC JP-8 Start-up

    DTIC Science & Technology

    2008-10-01

    PERCENT_SUPPORTEDNAME FTE Equivalent: Total Number: Sub Contractors (DD882) Inventions (DD882) TECHNICAL REPORT ARMY ARO Liquid Tin Anode SOFC JP-8... REPORT Liquid Tin Anode SOFC JP-8 Start-up 14. ABSTRACT 16. SECURITY CLASSIFICATION OF: This program demonstrated the feasibility to use CellTech...2008 Standard Form 298 (Rev 8/98) Prescribed by ANSI Std. Z39.18 - 31-Aug-2008 Liquid Tin Anode SOFC JP-8 Start-up Report Title ABSTRACT This

  12. ECH-assisted startup at KSTAR

    SciTech Connect

    Bae, Y. S.; Joung, M.; Yoon, S. W.; Kim, J. H.; Hahn, S. H.; Kim, W. C.; Yang, H. L.; Oh, Y. K.; Bak, J. S.; Kwon, M.; Jeong, J. H.; Park, S. I.; Cho, M. H.; Namkung, W.; Jackson, G. L.; Humphreys, D.; Walker, M. L.; Gorelov, Y.; Leuer, J. A.; Hyatt, A. W.

    2009-11-26

    The electron cyclotron heating (ECH)-assisted startup was successful in the Korea Superconducting Tokamak Advanced Research (KSTAR) first plasma campaign completed in June, 2008. It was observed that the second harmonic EC wave of 0.35 MW was sufficient to achieve breakdown in the ECH pre-ionization phase, to allow burn through, and to sustain the plasma during the current ramp with a low loop voltage of 2.0 V. This corresponds to a toroidal electric field of 0.24 Vm{sup -1} at the innermost vacuum vessel wall (R = 1.3 m). Since there is no feedback control of the plasma radial position in the initial phase of the KSTAR first plasma campaign, wall contact caused the plasma current fall to zero soon after the ECH beam was turned off. Extending pulse duration of the ECH power to 190 ms allowed the plasma current to rise up to more than 100 kA with a ramp-up rate of 0.8 MA/s and the pulse duration of 210 ms. Later in the first plasma campaign, the plasma was sustained up to 865 ms with the help of additional heating of 350-ms long ECH beam and with the help of the plasma radial position feedback control. The plasma current in the pre-ionization phase was observed and it is considered to be pressure-driven Pfirsch-Schlueter current.

  13. Effects of Feedstock Sources on Inoculant Acclimatization: Start-up Strategies and Reactor Performance.

    PubMed

    Yang, Qian; Wei, Liang-Huan; Li, Wei-Zun; Chen, Yu; Ju, Mei-Ting

    2017-04-08

    Different inoculum sources and acclimatization methods result in different substrate adaptation and biodegradability. To increase straw degradation rate, shorten the digester start-up time, and enhance the biogas production, we domesticated anaerobic sludge by adding microcrystalline cellulose (MCC). During acclimatization, the start-up strategies and reactor performance were investigated to analyze changes in feedstock adaption, biodegradability, and methanogen activity. The effect of the domesticated inoculum was evaluated by testing batch un-pretreated corn stover with a dewatered sludge (DS)-domesticated inoculum as a control. The results showed that (1) using MCC as a substrate rapidly improved microorganism biodegradability and adaptation. (2) MCC as domesticated substrate has relatively stable system and high mass conversion, but with low buffer capacity. (3) Macro- and micronutrients should be added for improving the activity of methanogenic and system's buffer capacity. (4) Using the domesticated inoculums and batch tests to anaerobically digest untreated corn stover yielded rapid biogas production of 292 mL, with an early peak value on the first day. The results indicated that cultivating directional inoculum can efficiently and quickly start-up digester. These investigated results to promote anaerobic digestion of straw for producing biogas speed up the transformation of achievements of biomass solid waste utilization have a positive promoting significance.

  14. Photovoltaic module start-up for the International Space Station

    SciTech Connect

    Hajela, G.P.; Hague, L.M.

    1996-12-31

    The International Space Station (ISS) US On-Orbit Segment Electric Power System (EPS) uses four photovoltaic modules (PVMs). Each PVM consists of solar array wings (SAW) for converting solar flux to electric power, nickel-hydrogen batteries for electric energy storage, electronic boxes for electric voltage control and power switching, and a thermal control system (TCS) for maintaining selected PVM components within their normal operating temperature ranges. Each PVM consists of two independent power channels, which are started sequentially. The start-up consists of deploying the SAW and photovoltaic radiator (PVR), initialization and check out of all hardware, thermally conditioning batteries, and charging batteries. After start-up, each PVM power channel is able to generate, store, and distribute electric power to ISS loads. Electric power to support start-up of the first PVM is provided by the NSTS via two auxiliary power converter units (APCUs), one per channel. During sunlit periods, the SAW provides power for the battery heaters (for thermal conditioning, as needed) and battery charging. During eclipse periods, the APCU maintains the channel in a standby mode. After start-up is complete, the APCU is disconnected and the PVM operates independently. The process used to start-up the first PVM on the ISS is described in this paper. Procedures used to bring dormant batteries to their normal operating temperature range and then to charge them to 100% state of charge (SOC) are also described. Total time required to complete start-up and the APCU power required during start-up are computed and compared to the requirements.

  15. Rapid Startup and Loading of an Attached Growth, Simultaneous Nitrification/Denitrification Membrane Aerated Bioreactor

    NASA Technical Reports Server (NTRS)

    Meyer, Caitlin; Vega, Leticia

    2014-01-01

    The Membrane Aerated Bioreactor (MABR) is an attached-growth biological system for simultaneous nitrification and denitrification. This design is an innovative approach to common terrestrial wastewater treatments for nitrogen and carbon removal. Implementing a biologically-based water treatment system for long-duration human exploration is an attractive, low energy alternative to physiochemical processes. Two obstacles to implementing such a system are (1) the "start-up" duration from inoculation to steady-state operations and (2) the amount of surface area needed for the biological activity to occur. The Advanced Water Recovery Systems (AWRS) team at JSC explored these two issues through two tests; a rapid inoculation study and a wastewater loading study. Results from these tests demonstrate that the duration from inoculation to steady state can be reduced to two weeks and that the surface area to volume ratio baseline used in the Alternative Water Processor (AWP) test was higher than what was needed to remove the organic carbon and ammonium from the system.

  16. [Quick Start-up and Sustaining of Shortcut Nitrification in Continuous Flow Reactor].

    PubMed

    Wu, Peng; Zhang Shi-ying; Song, Yin-ling; Xu, Yue-zhong; Shen, Yao-liang

    2016-04-15

    How to achieve fast and stable startup of shortcut nitrification has a very important practical value for treatment of low C/N ratio wastewater. Thus, the quick start-up and sustaining of shortcut nitrification were investigated in continuous flow reactor targeting at the current situation of urban wastewater treatment plant using a continuous flow process. The results showed that quick start-up of shortcut nitrification could be successfully achieved in a continuous flow reactor after 60 days' operation with intermittent aeration and controlling of three stages of stop/aeration time (15 min/45 min, 45 min/45 min and 30 min/30 min). The nitrification rates could reach 90% or 95% respectively, while influent ammonia concentrations were 50 or 100 mg · L⁻¹ with stop/aeration time of 30 min/30 min. In addition, intermittent aeration could inhibit the activity of nitrite oxidizing bacteria (NOB), while short hydraulic retention time (HRT) may wash out NOB. And a combined use of both measures was beneficial to sustain shortcut nitrification.

  17. Gazelles, unicorns, and dragons battle cancer through the Nanotechnology Startup Challenge.

    PubMed

    Truman, Rosemarie; Locke, Cody J

    On March 4th, 2016, Springer's Cancer Nanotechnology office promoted the launch of the Nanotechnology Startup Challenge in Cancer (NSC(2) ). This innovation-development model is a partnership among our company, the Center for Advancing Innovation (CAI), MedImmune, the global biologics arm of AstraZeneca, and multiple institutes at the National Institutes of Health (NIH). NSC(2) "crowdsources" talent from around the world to launch startups with near-term, commercially viable cancer nanotechnology inventions, which were developed by the National Cancer Institute (NCI), the National Heart, Lung and Blood Institute (NHLBI), and the National Institute of Biomedical Imaging and Bioengineering (NIBIB). Crowdsourcing is a process in which one uses the internet to engage a large group of people in an activity, such as NSC(2) . For this initiative, CAI engaged universities, industry professionals, foundations, investors, relevant media outlets, seasoned entrepreneurs, and life sciences membership organizations to request that they participate in the challenge. From this outreach, fifty-six key thought leaders have enrolled in NSC(2) as judges, mentors, and/or advisors to challenge teams (http://www.nscsquared.org/judges.html). Along with crowdsourcing talent to bolt startups around NIH inventions, NSC(2) will also catalyze the launch of companies around "third-party" cancer nanotechnology inventions, which were conceived and developed outside of the NIH. Twenty-eight robust teams were accepted to the challenge on March 14th, 2016.

  18. Physics and optimization of plasma startup in the RFP

    NASA Astrophysics Data System (ADS)

    Mao, W.; Chapman, B. E.; Ding, W. X.; Lin, L.; Almagri, A. F.; Anderson, J. K.; Den Hartog, D. J.; Duff, J.; Ko, J.; Kumar, S. T. A.; Morton, L.; Munaretto, S.; Parke, E.; Reusch, J. A.; Sarff, J. S.; Waksman, J.; Brower, D. L.; Liu, W.

    2015-05-01

    In the tokamak and reversed-field pinch (RFP), inductively driven toroidal plasma current provides the confining poloidal magnetic field and ohmic heating power, but the magnitude and/or duration of this current is limited by the available flux swing in the poloidal field transformer. A portion of this flux is consumed during startup as the current is initiated and ramped to its final target value, and considerable effort has been devoted to understanding startup and minimizing the amount of flux consumed. Flux consumption can be reduced during startup in the RFP by increasing the toroidal magnetic field, Bti, applied to initiate the discharge, but the underlying physics is not yet entirely understood. Toward increasing this understanding, we have for the first time in the RFP employed advanced, non-invasive diagnostics on the Madison Symmetric Torus to measure the evolution of current, magnetic field, and kinetic profiles during startup. Flux consumption during startup is dominantly inductive, but we find that the inductive flux consumption drops as Bti increases. The resistive consumption of flux, while relatively small, apparently increases with Bti due to a smaller electron temperature. However, the ion temperature increases with Bti, exceeding the electron temperature and thus reflecting non-collisional heating. Magnetic fluctuations also increase with Bti, corresponding primarily to low-n modes that emerge sequentially as the safety factor profile evolves from tokamak-like to that of the RFP.

  19. Load adaptive start-up scheme for synchronous boost DC-DC converter

    NASA Astrophysics Data System (ADS)

    Guoding, Dai; Wenliang, Xiu; Yuezhi, Liu; Yawei, Qi; Zuqi, Dong

    2016-10-01

    This paper presents a load adaptive soft-start scheme through which the inductor current of the synchronous boost DC-DC converter can trace the load current at the start-up stage. This scheme effectively eliminates the inrush-current and over-shoot voltage and improves the load capability of the converter. According to the output voltage, the start-up process is divided into three phases and at each phase the inductor current is limited to match the load. In the pre-charge phase, a step-increasing constant current gives a smooth rise of the output voltage which avoids inrush current and ensures the converter successfully starts up at different load situations. An additional ring oscillator operation phase enables the converter to start up as low as 1.4 V. When the converter enters into the system loop soft-start phase, an output voltage and inductor current detection methods make the transition of the phases smooth and the inductor current and output voltage rise steadily. Effective protection circuits such as short-circuit protection, current limit circuit and over-temperature protection circuit are designed to guarantee the safety and reliability of the chip during the start-up process. The proposed start-up circuit is implemented in a synchronous boost DC-DC converter based on TSMC 0.35 μm CMOS process with an input voltage range 1.4-4.2 V, and a steady output voltage 5 V, and the switching frequency is 1 MHz. Simulation results show that inrush current and overshoot voltage are suppressed with a load range from 0-2.1 A, and inductor current is as low as 259 mA when the output shorts to the ground.

  20. Pinon Pine power project nears start-up

    SciTech Connect

    Tatar, G.A.; Gonzalez, M.; Mathur, G.K.

    1997-12-31

    The IGCC facility being built by Sierra Pacific Power Company (SPPCo) at their Tracy Station in Nevada is one of three IGCC facilities being cost-shared by the US Department of Energy (DOE) under their Clean Coal Technology Program. The specific technology to be demonstrated in SPPCo`s Round Four Project, known as the Pinon Pine IGCC Project, includes the KRW air blown pressurized fluidized bed gasification process with hot gas cleanup coupled with a combined cycle facility based on a new GE 6FA gas turbine. Construction of the 100 MW IGCC facility began in February 1995 and the first firing of the gas turbine occurred as scheduled on August 15, 1996 with natural gas. Mechanical completion of the gasifier and other outstanding work is due in January 1997. Following the startup of the plant, the project will enter a 42 month operating and testing period during which low sulfur western and high sulfur eastern or midwestern coals will be processed.

  1. Resonance investigation of pump-turbine during startup process

    NASA Astrophysics Data System (ADS)

    He, L. Y.; Wang, Z. W.; Kurosawa, S.; Nakahara, Y.

    2014-12-01

    The causes of resonance of a certain model pump-turbine unit during startup process were investigated in this article. A three-dimensional full flow path analysis model which contains spiral case, stay vanes, guide vanes, runner, gaps outside the runner crown and band, and draft tube was constructed. The transient hydraulic excitation force of full flow path was analyzed under five conditions near the resonance region. Based on one-way fluid- structure interaction (FSI) analysis model, the dynamic stress characteristics of the pump-turbine runner was investigated. The results of pressure pulsation, vibration mode and dynamic stress obtained from simulation were consistent with the test results. The study indicated that the hydraulic excitation frequency (Zg*fn) Hz due to rotor-stator interference corresponding to the natural frequency of 2ND+4ND runner mode is the main cause of resonance. The relationship among pressure pulsation, vibration mode and dynamic stress was discussed in this paper. The results revealed the underlying causes of the resonance phenomenon.

  2. Resonance investigation of pump-turbine during startup process

    NASA Astrophysics Data System (ADS)

    Y He, L.; Wang, Z. W.; Kurosawa, S.; Nakahara, Y.

    2014-03-01

    The causes of resonance of a certain model pump-turbine unit during startup process were investigated in this article. A three-dimensional full flow path analysis model which contains spiral case, stay vanes, guide vanes, runner, gaps outside the runner crown and band, and draft tube was constructed. The transient hydraulic excitation force of full flow path was analyzed under five conditions near the resonance region. Based on one-way fluid- structure interaction (FSI) analysis model, the dynamic stress characteristics of the pump-turbine runner was investigated. The results of pressure pulsation, vibration mode and dynamic stress obtained from simulation were consistent with the test results. The study indicated that the hydraulic excitation frequency (Zg*fn) Hz due to rotor-stator interference corresponding to the natural frequency of 2ND+4ND runner mode is the main cause of resonance. The relationship among pressure pulsation, vibration mode and dynamic stress was discussed in this paper. The results revealed the underlying causes of the resonance phenomenon.

  3. Expanding Non-solenoidal Startup with Local Helicity Injection to Increased Toroidal Field and Helicity Injection Rate

    NASA Astrophysics Data System (ADS)

    Perry, J. M.; Barr, J. L.; Bodner, G. M.; Bongard, M. W.; Burke, M. G.; Fonck, R. J.; Hinson, E. T.; Lewicki, B. T.; Reusch, J. A.; Schlossberg, D. J.; Winz, G. R.

    2015-11-01

    Local helicity injection (LHI) is a non-solenoidal startup technique under development on the Pegasus ST. Plasma currents up to 0.18 MA have been initiated by LHI in conjunction with poloidal field induction. A 0-D power balance model has been developed to predict plasma current evolution by balancing helicity input against resistive dissipation. The model is being validated against a set of experimental measurements and magnetic reconstructions with radically varied plasma geometric evolutions. Outstanding physics issues with LHI startup are the scalings of confinement and MHD activity with helicity injection rate and toroidal field strength, as well as injector behavior at high field. Preliminary results from the newly-installed Thomson scattering system suggest core temperatures of a few hundred eV during LHI startup. Measurements are being expanded to multiple spatial points for ongoing confinement studies. A set of larger-area injectors is being installed in the lower divertor region, where increased toroidal field will provide a helicity injection rate over 3 times that of outboard injectors. In this regime helicity injection will be the dominant current drive. Experiments with divertor injectors will permit experimental differentiation of several possible confinement models, and demonstrate the feasibility of LHI startup at high field. Work supported by US DOE grant DE-FG02-96ER54375.

  4. Modeling startup and shutdown transient of the microlinear piezo drive via ANSYS

    NASA Astrophysics Data System (ADS)

    Azin, A. V.; Bogdanov, E. P.; Rikkonen, S. V.; Ponomarev, S. V.; Khramtsov, A. M.

    2017-02-01

    The article describes the construction-design of the micro linear piezo drive intended for a peripheral cord tensioner in the reflecting surface shape regulator system for large-sized transformable spacecraft antenna reflectors. The research target –the development method of modeling startup and shutdown transient of the micro linear piezo drive. This method is based on application software package ANSYS. The method embraces a detailed description of the calculation stages to determine the operating characteristics of the designed piezo drive. Based on the numerical solutions, the time characteristics of the designed piezo drive are determined.

  5. Beta: An Experiment in Funded Undergraduate Start-Up

    ERIC Educational Resources Information Center

    Jones, Paul; Forbes-Simpson, Kellie; Maas, Gideon; Newbery, Robert

    2015-01-01

    This paper reports on an evaluation of a funded undergraduate project designed to enable student business start-up. The programme, entitled "Beta", provides undergraduate students with £1,500 of seed-corn funding. The key objective of the project is for the participants to exit it with a viable and legal business entity through which…

  6. Creating Start-up Companies around NCI Inventions | Poster

    Cancer.gov

    By Karen Surabian, Thomas Stackhouse, and Rose Freel, Contributing Writers, and Rosemarie Truman, Guest Writer The National Cancer Institute (NCI), led by the Technology Transfer Center (TTC),  the Avon Foundation, and The Center for Advancing Innovation have partnered to create a “first-of-a-kind” Breast Cancer Start-up Challenge.

  7. Start-Up Rhetoric in Eight Speeches of Barack Obama

    ERIC Educational Resources Information Center

    O'Connell, Daniel C.; Kowal, Sabine; Sabin, Edward J.; Lamia, John F.; Dannevik, Margaret

    2010-01-01

    Our purpose in the following was to investigate the start-up rhetoric employed by U.S. President Barack Obama in his speeches. The initial 5 min from eight of his speeches from May to September of 2009 were selected for their variety of setting, audience, theme, and purpose. It was generally hypothesized that Barack Obama, widely recognized for…

  8. A Boom Time for Education Start-Ups

    ERIC Educational Resources Information Center

    DeSantis, Nick

    2012-01-01

    Harsh economic realities mean trouble for college leaders. But where administrators perceive an impending crisis, investors increasingly see opportunity. In recent years, venture capitalists have poured millions into education-technology start-ups, trying to cash in on a market they see as ripe for a digital makeover. And lately, those wagers have…

  9. Success of Breast Cancer Startup Challenge Inspires Second Challenge | Poster

    Cancer.gov

    By Thomas Stackhouse, Joseph Conrad, and Michele Newton, Contributing Writers, and Rosemarie Truman, Guest Writer Sixty-one teams have been accepted into, and are now competing in, the Neuro Startup Challenge, a new collaboration established by the National Institutes of Health (NIH) with The Center for Advancing Innovation (CAI) and Heritage Provider Network, Inc.

  10. 40 CFR 68.77 - Pre-startup review.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...) CHEMICAL ACCIDENT PREVENTION PROVISIONS Program 3 Prevention Program § 68.77 Pre-startup review. (a) The... stationary sources when the modification is significant enough to require a change in the process safety... change, § 68.75. (4) Training of each employee involved in operating a process has been completed....

  11. 26 CFR 1.195-1T - Election to amortize start-up expenditures (temporary).

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 26 Internal Revenue 3 2011-04-01 2011-04-01 false Election to amortize start-up expenditures... Corporations (continued) § 1.195-1T Election to amortize start-up expenditures (temporary). (a) In general. Under section 195(b), a taxpayer may elect to amortize start-up expenditures as defined in section...

  12. 26 CFR 1.195-1T - Election to amortize start-up expenditures (temporary).

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 26 Internal Revenue 3 2010-04-01 2010-04-01 false Election to amortize start-up expenditures... (continued) § 1.195-1T Election to amortize start-up expenditures (temporary). (a) In general. Under section 195(b), a taxpayer may elect to amortize start-up expenditures as defined in section 195(c)(1). In...

  13. 40 CFR 60.2918 - What happens during periods of startup, shutdown, and malfunction?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 6 2010-07-01 2010-07-01 false What happens during periods of startup... of startup, shutdown, and malfunction? The emission limitations and operating limits apply at all times except during OSWI unit startups, shutdowns, or malfunctions. Performance Testing...

  14. 40 CFR 60.2953 - What information must I submit prior to initial startup?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... initial startup? 60.2953 Section 60.2953 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... initial startup? You must submit the information specified in paragraphs (a) through (e) of this section prior to initial startup. (a) The type(s) of waste to be burned. (b) The maximum design waste...

  15. 40 CFR 60.2195 - What information must I submit prior to initial startup?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... initial startup? 60.2195 Section 60.2195 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY..., 2001 Recordkeeping and Reporting § 60.2195 What information must I submit prior to initial startup? You... startup. (a) The type(s) of waste to be burned. (b) The maximum design waste burning capacity. (c)...

  16. 40 CFR 60.2953 - What information must I submit prior to initial startup?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... initial startup? 60.2953 Section 60.2953 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... initial startup? You must submit the information specified in paragraphs (a) through (e) of this section prior to initial startup. (a) The type(s) of waste to be burned. (b) The maximum design waste...

  17. 40 CFR 60.2685 - What happens during periods of startup, shutdown, and malfunction?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 6 2010-07-01 2010-07-01 false What happens during periods of startup... happens during periods of startup, shutdown, and malfunction? (a) The emission limitations and operating limits apply at all times except during CISWI unit startups, shutdowns, or malfunctions. (b)...

  18. 40 CFR 65.6 - Startup, shutdown, and malfunction plan and procedures.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 15 2011-07-01 2011-07-01 false Startup, shutdown, and malfunction... (CONTINUED) AIR PROGRAMS (CONTINUED) CONSOLIDATED FEDERAL AIR RULE General Provisions § 65.6 Startup... Group 2A or Group 2B process vents. (b) Startup, shutdown, and malfunction plan—(1) Description...

  19. 40 CFR 60.2120 - What happens during periods of startup, shutdown, and malfunction?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 6 2010-07-01 2010-07-01 false What happens during periods of startup... 1, 2001 Emission Limitations and Operating Limits § 60.2120 What happens during periods of startup... during CISWI unit startups, shutdowns, or malfunctions. (b) Each malfunction must last no longer than...

  20. 40 CFR 62.14645 - What happens during periods of startup, shutdown, and malfunction?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 8 2011-07-01 2011-07-01 false What happens during periods of startup... Limits § 62.14645 What happens during periods of startup, shutdown, and malfunction? (a) The emission limitations and operating limits apply at all times except during periods of CISWI unit startup, shutdown,...

  1. 40 CFR 65.6 - Startup, shutdown, and malfunction plan and procedures.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 15 2010-07-01 2010-07-01 false Startup, shutdown, and malfunction... (CONTINUED) AIR PROGRAMS (CONTINUED) CONSOLIDATED FEDERAL AIR RULE General Provisions § 65.6 Startup... Group 2A or Group 2B process vents. (b) Startup, shutdown, and malfunction plan—(1) Description...

  2. 40 CFR 60.3025 - What happens during periods of startup, shutdown, and malfunction?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 6 2011-07-01 2011-07-01 false What happens during periods of startup... during periods of startup, shutdown, and malfunction? The emission limitations and operating limits apply at all times except during OSWI unit startups, shutdowns, or malfunctions. Model...

  3. 40 CFR 60.2918 - What happens during periods of startup, shutdown, and malfunction?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 6 2011-07-01 2011-07-01 false What happens during periods of startup... of startup, shutdown, and malfunction? The emission limitations and operating limits apply at all times except during OSWI unit startups, shutdowns, or malfunctions. Performance Testing...

  4. 40 CFR 62.14645 - What happens during periods of startup, shutdown, and malfunction?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 8 2010-07-01 2010-07-01 false What happens during periods of startup... Limits § 62.14645 What happens during periods of startup, shutdown, and malfunction? (a) The emission limitations and operating limits apply at all times except during periods of CISWI unit startup, shutdown,...

  5. 40 CFR 60.3025 - What happens during periods of startup, shutdown, and malfunction?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 6 2010-07-01 2010-07-01 false What happens during periods of startup... during periods of startup, shutdown, and malfunction? The emission limitations and operating limits apply at all times except during OSWI unit startups, shutdowns, or malfunctions. Model...

  6. 78 FR 73753 - Partnerships; Start-Up Expenditures; Organization and Syndication Fees

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-09

    ... Internal Revenue Service 26 CFR Part 1 RIN 1545-BL06 Partnerships; Start-Up Expenditures; Organization and.... SUMMARY: This document contains proposed regulations concerning the deductibility of start-up expenditures... deductibility of start-up expenditures and organizational expenses for partnerships following a...

  7. Start-up of a two-stage bioaugmented anoxic-oxic (A/O) biofilm process treating petrochemical wastewater under different DO concentrations.

    PubMed

    Guo, Jingbo; Ma, Fang; Chang, Chein-Chi; Cui, Di; Wang, Li; Yang, Jixian; Wang, Liang

    2009-07-01

    The traditional two-stage anoxic-oxic (A/O) activated sludge process might be inefficient in pollutants removal and could not ensure the effluent quality. By installing polyurethane foams as carriers and inoculating specialized bacteria in the oxic compartments, the activated sludge systems could be transformed into bioaugmented biofilm processes to enhance the removal efficiency to recalcitrant pollutants. Optimal environment should be provided for the bioaugmented bacteria during systems' start-up. In the present research, dissolved oxygen (DO) concentration was studied as a crucial environmental factor on the performances of the bioagumented systems. The results indicated that the system adopted lower DO concentration took less time to start-up, performed higher pollutants removal efficiency and stronger resistance to shock loadings compared to the system with higher DO level. This was the first attempt to evaluate the importance of DO concentration on the start-up of the two-stage bioaugmented A/O biofilm process.

  8. Non-solenoidal Startup via Local Helicity Injection on Pegasus: Progress and Plans

    NASA Astrophysics Data System (ADS)

    Reusch, J. A.; Barr, J. L.; Bodner, G. M.; Bongard, M. W.; Burke, M. G.; Fonck, R. J.; Hinson, E. T.; Lewicki, B. T.; Perry, J. M.; Schlossberg, D. J.

    2015-11-01

    Non-solenoidal plasma startup via local helicity injection (LHI) at the Pegasus toroidal experiment now provides routine operation at Ip ~ 0.17MA with Iinj ~ 5kA and Vinj ~ 1kV from four active arc injectors. Experiments in the past year have advanced the understanding of the governing physics of LHI and its supporting technology. Injector impedance scales as Vinj3/ 2 and is governed by two effects: a quasineutrality constraint on electron beam propagation, related to the tokamak edge density, and double-layer sheath expansion, related to narc. Injector design improvements permit operation at Vinj >= 1 kV without deleterious PMI or impurity generation. Discharges with varied shape, Ip(t), and helicity input test a predictive 0D power-balance model for LHI startup. Anomalous, reconnection-driven Ti >800 eV and strong MHD activity localized near the injectors are observed during LHI. Preliminary core Thomson scattering measurements indicate surprisingly high Te >300 eV, which if verified may indicate the dominance of high-energy electron fueling from the injector current streams. A new divertor injector system has been designed to substantially increase the available helicity input rate and support critical studies of confinement during LHI and reconnection activity at high Ip. A proposed upgrade to the Pegasus experiment will extend these studies to NSTX-U relevant parameters. Support: US DOE grants DE-FG02-96ER54375; and DE-SC0006928.

  9. Start-up and stabilization of an Anammox process from a non-acclimatized sludge in CSTR.

    PubMed

    Bagchi, Samik; Biswas, Rima; Nandy, Tapas

    2010-09-01

    Development of an Anammox (anaerobic ammonium oxidation) process using non-acclimatized sludge requires a long start-up period owing to the very slow growth rate of Anammox bacteria. This article addresses the issue of achieving a shorter start-up period for Anammox activity in a well-mixed continuously stirred tank reactor (CSTR) using non-acclimatized anaerobic sludge. Proper selection of enrichment conditions and low stirring speed of 30 +/- 5 rpm resulted in a shorter start-up period (82 days). Activity tests revealed the microbial community structure of Anammox micro-granules. Ammonia-oxidizing bacteria (AOB) were found on the surface and on the outer most layers of granules while nitrite-oxidizing bacteria (NOB) and Anammox bacteria were present inside. Fine-tuning of influent NO2(-)/NH4+ ratio allowed Anammox activity to be maintained when mixed microbial populations were present. The maximum nitrogen removal rate achieved in the system was 0.216 kg N/(m(3) day) with a maximum specific nitrogen removal rate of 0.434 g N/(g VSS day). During the study period, Anammox activity was not inhibited by pH changes and free ammonia toxicity.

  10. 40 CFR 60.1220 - What happens to the emission limits during periods of startup, shutdown, and malfunction?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... during periods of startup, shutdown, and malfunction? 60.1220 Section 60.1220 Protection of Environment... Emission Limits § 60.1220 What happens to the emission limits during periods of startup, shutdown, and... waste combustion unit startup, shutdown, or malfunction. (b) Each startup, shutdown, or malfunction...

  11. 40 CFR 62.15150 - What happens to the operating requirements during periods of startup, shutdown, and malfunction?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... requirements during periods of startup, shutdown, and malfunction? 62.15150 Section 62.15150 Protection of... § 62.15150 What happens to the operating requirements during periods of startup, shutdown, and... municipal waste combustion unit startup, shutdown, or malfunction. (b) Each startup, shutdown,...

  12. 40 CFR 60.1695 - What happens to the operating requirements during periods of startup, shutdown, and malfunction?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... requirements during periods of startup, shutdown, and malfunction? 60.1695 Section 60.1695 Protection of... Requirements § 60.1695 What happens to the operating requirements during periods of startup, shutdown, and... municipal waste combustion unit startup, shutdown, or malfunction. (b) Each startup, shutdown,...

  13. 40 CFR 60.1220 - What happens to the emission limits during periods of startup, shutdown, and malfunction?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... during periods of startup, shutdown, and malfunction? 60.1220 Section 60.1220 Protection of Environment... Emission Limits § 60.1220 What happens to the emission limits during periods of startup, shutdown, and... waste combustion unit startup, shutdown, or malfunction. (b) Each startup, shutdown, or malfunction...

  14. 40 CFR 62.15150 - What happens to the operating requirements during periods of startup, shutdown, and malfunction?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... requirements during periods of startup, shutdown, and malfunction? 62.15150 Section 62.15150 Protection of... § 62.15150 What happens to the operating requirements during periods of startup, shutdown, and... municipal waste combustion unit startup, shutdown, or malfunction. (b) Each startup, shutdown,...

  15. 40 CFR 60.1695 - What happens to the operating requirements during periods of startup, shutdown, and malfunction?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... requirements during periods of startup, shutdown, and malfunction? 60.1695 Section 60.1695 Protection of... Requirements § 60.1695 What happens to the operating requirements during periods of startup, shutdown, and... municipal waste combustion unit startup, shutdown, or malfunction. (b) Each startup, shutdown,...

  16. Transport simulation of ITER (International Thermonuclear Engineering Reactor) startup

    SciTech Connect

    Attenberger, S.E.; Houlberg, W.A.

    1989-01-01

    The present International Thermonuclear Engineering Reactor (ITER) reference configurations are the Technology Phase,'' in which the plasma current is maintained noninductively at a subignition density, and the Physics Phase,'' which is ignited but requires inductive maintenance of the current. The WHIST 1.5-D transport code is used to evaluate the volt-second requirements of both configurations. A slow current ramp (60-80's) is required for fixed-radius startup in ITER to avoid hollow current density profiles. To reach the operating point requires about 203 V{center dot}s for the Technology Phase (18 MA) and about 270 V{center dot}s for the Physics Phase (22 MA). The resistive losses can be reduced with expanding-radius startup. 5 refs., 4 figs.

  17. Startup experience with a concentrating photovoltaic power system

    NASA Astrophysics Data System (ADS)

    Kaplan, S. I.

    1982-01-01

    Physical features and startup characteristics of a 240 kW parabolic trough photovoltaic power system are described. The Mississippi County Community College array (Blytheville, AR) comprises 45 rows of linear parabolic troughs oriented N-S, which track E-W by means of a hydraulically driven actuator. The solar input is focussed onto 50/50 water-glycol cooled receiver bars on which Si solar cells are mounted. Nominal operating temperature for the cells is 50 C, with the heat transferred to the building heat supply in the winter. The output is routed through a power conditioning unit for inversion to 480 V ac power, for use by the school or, when the demand is exceeded, for direct transmission into the utility grid. Problems during startup have included misalignment, due to gravitational torquing and twisting, standoff insulation, and tracking during cloudy periods. Output has been 45% of design during the autumn of 1981.

  18. Development and optimization of new generation Start-Up Instrumentation systems (SUI) for domestic CANDU reactors

    NASA Astrophysics Data System (ADS)

    Nasimi, Elnara

    Due to the age and operating experience of Bruce Power units, equipment ageing and obsolescence has become one of the main challenges that need to be resolved for all systems, structures and components in order to ensure a safe and reliable production of energy. The research objectives of this thesis will focus on methodology for modernization of Start-Up Instrumentation (SUI), both in-core and Control Room equipment, using a new generation of detectors and cables in order to manage obsolescence. The main objective of this thesis is to develop a new systematic approach to SUI installation/replacement procedure development and optimization. Although some additional features, such as real-time data monitoring and storage/archiving solutions for SUI systems are also examined to take full advantage of today's digital technology, the objective of this thesis does not include detailed parametrical studies of detector or system performance. Instead, a number of technological, operational and maintenance issues associated with Start-Up Instrumentation systems at Bruce Power will be identified in this project and a structured approach to developing a replacement/installation procedure that can be standardized and used across all of the domestic CANDU stations is proposed. Finally, benefits of Hierarchical Control Chart (HCC) methodology for all stages of plant life management, such as system design, development, operation and maintenance are demonstrated. Keywords: Task Breakdown and Analysis methodology, installation/removal procedure development and optimization, risk-based analysis and optimization, Hierarchical Control Chart (HCC) methodology for system maintenance and troubleshooting, Start-Up Instrumentation (SUI), Ion Chambers, Fission Chambers, proportional counters, Shutdown System 1 (SDS1), Shutdown System 2 (SDS2).

  19. Fusion core start-up, ignition and burn simulations of reversed-field pinch (RFP) reactors

    SciTech Connect

    Chu, Yuh-Yi

    1988-01-01

    A transient reactor simulation model is developed to investigate and simulate the start-up, ignition and burn of a reversed-field pinch reactor. The simulation is based upon a spatially averaged plasma balance model with field profiles obtained from MHD quasi-equilibrium analysis. Alpha particle heating is estimated from Fokker-Planck calculations. The instantaneous plasma current is derived from a self-consistent circuit analysis for plasma/coil/eddy current interactions. The simulation code is applied to the TITAN RFP reactor design which features a compact, high-power-density reversed-field pinch fusion system. A contour analysis is performed using the steady-state global plasma balance. The results are presented with contours of constant plasma current. A saddle point is identified in the contour plot which determines the minimum value of plasma current required to achieve ignition. An optimized start-up to ignition and burn path can be obtained by passing through the saddle point. The simulation code is used to study and optimize the start-up scenario. In the simulations of the TITAN RFP reactor, the OH-driven superconducting EF coils are found to deviate from the required equilibrium values as the induced plasma current increases. This results in the modification of superconducting EF coils and the addition of a set of EF trim coils. The design of the EF coil system is performed with the simulation code subject to the optimization of trim-coil power and current. In addition, the trim-coil design is subject to the constraints of vertical-field stability index and maintenance access. A power crowbar is also needed to prevent the superconducting EF coils from generating excessive vertical field. A set of basic results from the simulation of TITAN RFP reactor yield a picture of RFP plasma operation in a reactor. Investigations of eddy current are also presented. 145 refs., 37 figs., 2 tabs.

  20. Tokamak Startup Using Point-Source dc Helicity Injection

    SciTech Connect

    Battaglia, D. J.; Bongard, M. W.; Fonck, R. J.; Redd, A. J.; Sontag, A. C.

    2009-06-05

    Startup of a 0.1 MA tokamak plasma is demonstrated on the ultralow aspect ratio Pegasus Toroidal Experiment using three localized, high-current density sources mounted near the outboard midplane. The injected open field current relaxes via helicity-conserving magnetic turbulence into a tokamaklike magnetic topology where the maximum sustained plasma current is determined by helicity balance and the requirements for magnetic relaxation.

  1. Fehlertoleranzanalyse des FlexRay Startup-Prozesses

    NASA Astrophysics Data System (ADS)

    Bünte, Sven; Milbredt, Paul

    Die PlexfiRay-Prozeduren Wakeup und Startup sollen eine konsistent-synchrone Kommunikation bezüglich eines TDMA verwandten Verfuhrens herstellen. Beide Algorithmen werden in dieser Arbeit ubstrukt modelliert und mit Hilfe des Model Checkers SPIN bezüglich Terminierung analysiert. Die Ergebnisse zeigen, dass in bestimmten Fehlerszenarios die Verwendung von Central Bus Guardians, die Clusterkonfiguration und das Verhalten des Hosts darüber entscheiden, ob Fehlertoleranz und Laufzeitbeschränkungen garantiert werden können.

  2. Start-up configuration of the NICA collider equipment

    NASA Astrophysics Data System (ADS)

    Kozlov, O.; Meshkov, I.; Sidorin, A.; Trubnikov, G.

    2016-12-01

    The start-up version of the NICA/MPD project is determined in accordance with the strategy of its staging. At the initial stage, the elements required for completing the BM@N experiment using an extracted beam and the test of MPD elements at a luminosity no less than 5 × 1025 cm-2 s-1 will be put into operation. The equipment configuration and strategy of the NICA collider operation during its commissioning are presented in this article.

  3. Feasibility study of ECRH in NSTX-U startup plasma

    NASA Astrophysics Data System (ADS)

    Lopez, N. A.; Poli, F.; Taylor, G.; Harvey, R.; Petrov, Yu.

    2016-10-01

    A key mission goal of the National Spherical Torus eXperiment Upgrade (NSTX-U) is the demonstration of fully non-inductive startup and operation. In part to accomplish this, a 1MW, 28 GHz ECRH system is presently being developed for implementation on NSTX-U in 2018. Like most spherical tokamaks, NSTX-U operates in the overdense regime (fpe>fce) , which limits traditional ECRH to the early startup phase. An extensive modelling effort of the propagation and absorption of EC waves in the evolving plasma is thus required to define the most effective window of operation, and to optimize the launcher geometry for maximal heating and for current drive during this window. In fact, the ECRH system will play an important role in preparing a target plasma for subsequent injection of IC waves and NBI. Here we assess the feasibility of O1-mode ECRH in NSTX-U startup plasma at full field of 1T through time-dependent simulations performed with the transport solver TRANSP. Linear ray-tracing calculations conducted by GENRAY are coupled into the TRANSP framework, allowing the plasma equilibrium and the temperature profiles to evolve self-consistently in response to the injected microwave power. Furthermore, we investigate additional possibilities of heating and current drive made available through coupling the injected O-mode power to the electrostatic EBW via the slow X-mode as an intermediary.

  4. Long Pulse EBW Start-up Experiments in MAST

    SciTech Connect

    Shevchenko, V. F.; Caughman, J. B. O.; Diem, Stephanie J; Mailloux, J.; Peng, Yueng Kay Martin; Saveliev, A. N.; Takase, Y.; Taylor, G.

    2015-01-01

    Start-up technique reported here relies on a double mode conversion (MC) for electron Bernstein wave (EBW) excitation. It consists of MC of the ordinary (0) mode, entering the plasma from the low field side of the tokamak, into the extraordinary (X) mode at a mirror-polarizer located at the high field side. The X mode propagates back to the plasma, passes through electron cyclotron resonance (ECR) and experiences a subsequent X to EBW MC near the upper hybrid resonance (UHR). Finally the excited EBW mode is totally absorbed at the Doppler shifted ECR. The absorption of EBW remains high even in cold rarefied plasmas. Furthermore, EBW can generate significant plasma current giving the prospect of a fully solenoid-free plasma start-up. First experiments using this scheme were carried out on MAST [1]. Plasma currents up to 33 kA have been achieved using 28 GHz 100kW 90ms RF pulses. Recently experimental results were extended to longer RF pulses showing further increase of plasma currents generated by RF power alone. A record current of 73kA has been achieved with 450ms RF pulse of similar power. The current drive enhancement was mainly achieved due to RF pulse extension and further optimisation of the start-up scenario.

  5. Long pulse EBW start-up experiments in MAST

    SciTech Connect

    Shevchenko, V. F.; Baranov, Y. F.; Bigelow, T.; Caughman, J. B.; Diem, S.; Dukes, C.; Finburg, P.; Hawes, J.; Gurl, C.; Griffiths, J.; Mailloux, J.; Peng, M.; Saveliev, A. N.; Takase, Y.; Tanaka, H.; Taylor, G.

    2015-03-12

    Start-up technique reported here relies on a double mode conversion (MC) for electron Bernstein wave (EBW) excitation. It consists of MC of the ordinary (O) mode, entering the plasma from the low field side of the tokamak, into the extraordinary (X) mode at a mirror-polarizer located at the high field side. The X mode propagates back to the plasma, passes through electron cyclotron resonance (ECR) and experiences a subsequent X to EBW MC near the upper hybrid resonance (UHR). Finally the excited EBW mode is totally absorbed at the Doppler shifted ECR. The absorption of EBW remains high even in cold rarefied plasmas. Furthermore, EBW can generate significant plasma current giving the prospect of a fully solenoid-free plasma start-up. First experiments using this scheme were carried out on MAST [1]. Plasma currents up to 33 kA have been achieved using 28 GHz 100kW 90ms RF pulses. Recently experimental results were extended to longer RF pulses showing further increase of plasma currents generated by RF power alone. A record current of 73kA has been achieved with 450ms RF pulse of similar power. The current drive enhancement was mainly achieved due to RF pulse extension and further optimisation of the start-up scenario.

  6. Long pulse EBW start-up experiments in MAST

    DOE PAGES

    Shevchenko, V. F.; Baranov, Y. F.; Bigelow, T.; ...

    2015-03-12

    Start-up technique reported here relies on a double mode conversion (MC) for electron Bernstein wave (EBW) excitation. It consists of MC of the ordinary (O) mode, entering the plasma from the low field side of the tokamak, into the extraordinary (X) mode at a mirror-polarizer located at the high field side. The X mode propagates back to the plasma, passes through electron cyclotron resonance (ECR) and experiences a subsequent X to EBW MC near the upper hybrid resonance (UHR). Finally the excited EBW mode is totally absorbed at the Doppler shifted ECR. The absorption of EBW remains high even inmore » cold rarefied plasmas. Furthermore, EBW can generate significant plasma current giving the prospect of a fully solenoid-free plasma start-up. First experiments using this scheme were carried out on MAST [1]. Plasma currents up to 33 kA have been achieved using 28 GHz 100kW 90ms RF pulses. Recently experimental results were extended to longer RF pulses showing further increase of plasma currents generated by RF power alone. A record current of 73kA has been achieved with 450ms RF pulse of similar power. The current drive enhancement was mainly achieved due to RF pulse extension and further optimisation of the start-up scenario.« less

  7. Using activity-based costing in surgery.

    PubMed

    Grandlich, Cheryl

    2004-01-01

    ACTIVITY-BASED COSTING is an accounting technique that allows organizations to determine actual costs associated with their services based on the resources they consume. THIS TECHNIQUE can be used in a variety of ways, including targeting high-cost activities, forecasting financial baselines, and supporting resource allocation. FOUR STEPS should be followed when applying activity-based costing to surgical procedures. THIS ARTICLE explores how Froedtert Memorial Lutheran Hospital, Milwaukee, used activity-based costing.

  8. Startup and oxygen concentration effects in a continuous granular mixed flow autotrophic nitrogen removal reactor.

    PubMed

    Varas, Rodrigo; Guzmán-Fierro, Víctor; Giustinianovich, Elisa; Behar, Jack; Fernández, Katherina; Roeckel, Marlene

    2015-08-01

    The startup and performance of the completely autotrophic nitrogen removal over nitrite (CANON) process was tested in a continuously fed granular bubble column reactor (BCR) with two different aeration strategies: controlling the oxygen volumetric flow and oxygen concentration. During the startup with the control of oxygen volumetric flow, the air volume was adjusted to 60mL/h and the CANON reactor had volumetric N loadings ranging from 7.35 to 100.90mgN/Ld with 36-71% total nitrogen removal and high instability. In the second stage, the reactor was operated at oxygen concentrations of 0.6, 0.4 and 0.2mg/L. The best condition was 0.2 mgO2/L with a total nitrogen removal of 75.36% with a CANON reactor activity of 0.1149gN/gVVSd and high stability. The feasibility and effectiveness of CANON processes with oxygen control was demonstrated, showing an alternative design tool for efficiently removing nitrogen species.

  9. Community structure dynamics during startup in microbial fuel cells - The effect of phosphate concentrations.

    PubMed

    Yanuka-Golub, Keren; Reshef, Leah; Rishpon, Judith; Gophna, Uri

    2016-07-01

    For microbial fuel cells (MFCs) to become a cost-effective wastewater treatment technology, they must produce a stable electro-active microbial community quickly and operate under realistic wastewater nutrient conditions. The composition of the anodic-biofilm and planktonic-cells communities was followed temporally for MFCs operated under typical laboratory phosphate concentrations (134mgL(-1)P) versus wastewater phosphate concentrations (16mgL(-1)P). A stable peak voltage was attained two-fold faster in MFCs operating under lower phosphate concentration. All anodic-biofilms were composed of well-known exoelectrogenic bacterial families; however, MFCs showing faster startup and a stable voltage had a Desulfuromonadaceae-dominated-biofilm, while biofilms co-dominated by Desulfuromonadaceae and Geobacteraceae characterized slower or less stable MFCs. Interestingly,planktonic-cell concentrations of these bacteria followed a similar trend as the anodic-biofilm and could therefore serve as a biomarker for its formation. These results demonstrate that wastewater-phosphate concentrations do not compromise MFCs efficiency, and considerably speed up startup times.

  10. Developing an Energy Performance Modeling Startup Kit

    SciTech Connect

    Wood, A.

    2012-10-01

    In 2011, the NAHB Research Center began the first part of the multi-year effort by assessing the needs and motivations of residential remodelers regarding energy performance remodeling. The scope is multifaceted - all perspectives will be sought related to remodeling firms ranging in size from small-scale, sole proprietor to national. This will allow the Research Center to gain a deeper understanding of the remodeling and energy retrofit business and the needs of contractors when offering energy upgrade services. To determine the gaps and the motivation for energy performance remodeling, the NAHB Research Center conducted (1) an initial series of focus groups with remodelers at the 2011 International Builders' Show, (2) a second series of focus groups with remodelers at the NAHB Research Center in conjunction with the NAHB Spring Board meeting in DC, and (3) quantitative market research with remodelers based on the findings from the focus groups. The goal was threefold, to: Understand the current remodeling industry and the role of energy efficiency; Identify the gaps and barriers to adding energy efficiency into remodeling; and Quantify and prioritize the support needs of professional remodelers to increase sales and projects involving improving home energy efficiency. This report outlines all three of these tasks with remodelers.

  11. Start-up and bacterial community compositions of partial nitrification in moving bed biofilm reactor.

    PubMed

    Liu, Tao; Mao, Yan-Jun; Shi, Yan-Ping; Quan, Xie

    2017-03-01

    Partial nitrification (PN) has been considered as one of the promising processes for pretreatment of ammonium-rich wastewater. In this study, a kind of novel carriers with enhanced hydrophilicity and electrophilicity was implemented in a moving bed biofilm reactor (MBBR) to start up PN process. Results indicated that biofilm formation rate was higher on modified carriers. In comparison with the reactor filled with traditional carriers (start-up period of 21 days), it took only 14 days to start up PN successfully with ammonia removal efficiency and nitrite accumulation rate of 90 and 91%, respectively, in the reactor filled with modified carriers. Evident changes of spatial distributions and community structures had been detected during the start-up. Free-floating cells existed in planktonic sludge, while these microorganisms trended to form flocs in the biofilm. High-throughput pyrosequencing results indicated that Nitrosomonas was the predominant ammonia-oxidizing bacterium (AOB) in the PN system, while Comamonas might also play a vital role for nitrogen oxidation. Additionally, some other bacteria such as Ferruginibacter, Ottowia, Saprospiraceae, and Rhizobacter were selected to establish stable footholds. This study would be potentially significant for better understanding the microbial features and developing efficient strategies accordingly for MBBR-based PN operation.

  12. Rapid and successful start-up of anammox process by immobilizing the minimal quantity of biomass in PVA-SA gel beads.

    PubMed

    Ali, Muhammad; Oshiki, Mamoru; Rathnayake, Lashitha; Ishii, Satoshi; Satoh, Hisashi; Okabe, Satoshi

    2015-08-01

    Rapid start-up of anaerobic ammonium oxidation (anammox) process in up-flow column reactors was successfully achieved by immobilizing minimal quantity of biomass in polyvinyl alcohol (PVA)-sodium alginate (SA) gel beads. The changes in the reactor performance (i.e., nitrogen removal rate; NRR) were monitored with time. The results demonstrate that the reactor containing the immobilized biomass concentration of 0.33 g-VSS L(-1) achieved NRR of 10.8 kg-N m(-3) d(-1) after 35-day operation, whereas the reactor containing the granular biomass of 2.5 g-VSS L(-1) could achieve only NRR of 3.5 kg-N m(-3) d(-1). This indicates that the gel immobilization method requires much lower seeding biomass for start-up of anammox reactor. To explain the better performance of the immobilized biomass, the biological and physicochemical properties of the immobilized biomass were characterized and compared with the naturally aggregated granular biomass. Effective diffusion coefficient (De) in the immobilized biomass was directly determined by microelectrodes and found to be three times higher than one in the granular biomass. High anammox activity (i.e., NH4(+) and NO2(-) consumption rates) was evenly detected throughout the gel beads by microelectrodes due to faster and deeper substrate transport. In contrast, anammox activity was localized in the outer layers of the granular biomass, indicating that the inner biomass could not contribute to the nitrogen removal. This difference was in good agreement with the spatial distribution of microbes analysed by fluorescence in situ hybridization (FISH). Based on these results, PVA-SA gel immobilization is an efficient strategy to initiate anammox reactors with minimal quantity of anammox biomass.

  13. Reducing start-up time and minimizing energy losses of Microbial Fuel Cells using Maximum Power Point Tracking strategy

    NASA Astrophysics Data System (ADS)

    Molognoni, Daniele; Puig, Sebastià; Balaguer, M. Dolors; Liberale, Alessandro; Capodaglio, Andrea G.; Callegari, Arianna; Colprim, Jesús

    2014-12-01

    Microbial Fuel Cells (MFCs) are considered to be an environmental friendly energy conversion technology. The main limitations that delay their industrialization include low current and power densities achievable and long start-up times. Maximum Power Point Tracking (MPPT) has been proposed as a method to enhance MFCs electrical performances. However, the specialized literature is still lacking of experimental works on scaled-up reactors and/or real wastewater utilization. This study evaluates the impact of a MPPT system applied to MFCs treating swine wastewater in terms of start-up time and long-term performance. For this purpose, two replicate cells were compared, one with applied MPPT control and one working with fixed resistance. Both MFCs were continuously fed with swine wastewater to validate the control system under real and dynamic conditions. The study demonstrated that the automatic resistance control was able to reduce the start-up time of about one month. Moreover, MPPT system increased of 40% the Coulombic efficiency at steady-state conditions, reduced energy losses associated with anode and cathode reactions and limited methanogenic activity in the anode chamber. A power density of 5.0 ± 0.2 W m-3 NAC was achieved feeding the system at an organic loading rate of 10 kg COD m-3 d-1.

  14. An analysis of the sliding pressure start-up of SCWR

    SciTech Connect

    Wang, F.; Yang, J.; Li, H.; Zhang, Y.; Zhang, J.; Shan, J.; Gou, J.; Zhang, B.; Chen, C.

    2012-07-01

    In this paper, the preliminary sliding pressure start-up system and scheme of supercritical water-cooled reactor in CGNPC (CGN-SCWR) were proposed. Thermal-hydraulic behavior in start-up procedures was analyzed in detail by employing advanced reactor subchannel analysis software ATHAS. The maximum cladding temperature (MCT for short) and core power of fuel assembly during the whole start-up process were investigated comparatively. The results show that the recommended start-up scheme meets the design requirements from the perspective of thermal-hydraulic. (authors)

  15. 40 CFR 60.2918 - What happens during periods of startup, shutdown, and malfunction?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Training and Qualification Emission Limitations and Operating Limits § 60.2918 What happens during periods... times except during OSWI unit startups, shutdowns, or malfunctions. Performance Testing...

  16. Interaction in Graduate Nursing Web-based Instruction.

    ERIC Educational Resources Information Center

    Boyle, Diane K.; Wambach, Karen A.

    2001-01-01

    Web-based instruction in graduate nursing courses was built on learner-centered and adult learning philosophies and interaction at several points: precourse, course start-up, course maintenance, and course closure. Students were relatively satisfied, found the courses convenient, were moderately engaged in active learning, and felt prepared for…

  17. Bootstrap finance: the art of start-ups.

    PubMed

    Bhide, A

    1992-01-01

    Entrepreneurship is more popular than ever: courses are full, policymakers emphasize new ventures, managers yearn to go off on their own. Would-be founders often misplace their energies, however. Believing in a "big money" model of entrepreneurship, they spend a lot of time trying to attract investors instead of using wits and hustle to get their ideas off the ground. A study of 100 of the 1989 Inc. "500" list of fastest growing U.S. start-ups attests to the value of bootstrapping. In fact, what it takes to start a business often conflicts with what venture capitalists require. Investors prefer solid plans, well-defined markets, and track records. Entrepreneurs are heavy on energy and enthusiasm but may be short on credentials. They thrive in rapidly changing environments where uncertain prospects may scare off established companies. Rolling with the punches is often more important than formal plans. Striving to adhere to investors' criteria can diminish the flexibility--the try-it, fix-it approach--an entrepreneur needs to make a new venture work. Seven principles are basic for successful start-ups: get operational fast; look for quick break-even, cash-generating projects; offer high-value products or services that can sustain direct personal selling; don't try to hire the crack team; keep growth in check; focus on cash; and cultivate banks early. Growth and change are the start-up's natural environment. But change is also the reward for success: just as ventures grow, their founders usually have to take a fresh look at everything again: roles, organization, even the very policies that got the business up and running.

  18. Start-Up of FEL Oscillator from Shot Noise

    SciTech Connect

    Kumar, V.; Krishnagopal, S.; Fawley, W.M.

    2007-01-25

    In free-electron laser (FEL) oscillators, as inself-amplified spontaneous emission (SASE) FELs, the buildup of cavitypower starts from shot noise resulting from the discreteness ofelectronic charge. It is important to do the start-up analysis for thebuild-up of cavity power in order to fix the macropulse width from theelectron accelerator such that the system reaches saturation. In thispaper, we use the time-dependent simulation code GINGER [1]toperformthis analysis. We present results of this analysis for theparameters of the Compact Ultrafast TErahertz FEL (CUTE-FEL) [2]beingbuilt atRRCAT.

  19. Start-up inertia as an origin for heterogeneous flow

    NASA Astrophysics Data System (ADS)

    Korhonen, Marko; Mohtaschemi, Mikael; Puisto, Antti; Illa, Xavier; Alava, Mikko J.

    2017-02-01

    For quite some time nonmonotonic flow curve was thought to be a requirement for shear banded flows in complex fluids. Thus, in simple yield stress fluids shear banding was considered to be absent. Recent spatially resolved rheological experiments have found simple yield stress fluids to exhibit shear banded flow profiles. One proposed mechanism for the initiation of such transient shear banding process has been a small stress heterogeneity rising from the experimental device geometry. Here, using computational fluid dynamics methods, we show that transient shear banding can be initialized even under homogeneous stress conditions by the fluid start-up inertia, and that such mechanism indeed is present in realistic experimental conditions.

  20. Startup of the FFTF sodium cooled reactor. [Acceptance Test Program

    SciTech Connect

    Redekopp, R.D.; Umek, A.M.

    1981-03-01

    The Fast Flux Test Facility (FFTF), located on the Department of Energy (DOE) Hanford Reservation near Richland, Washington, is a 3 Loop 400 MW(t) sodium cooled fast reactor with a primary mission to test fuels and materials for development of the Liquid Metal Fast Breeder Reactor (LMFBR). Bringing FFTF to a condition to accomplish this mission is the goal of the Acceptance Test Program (ATP). This program was the mechanism for achieving startup of the FFTF. Highlights of the ATP involving the system inerting, liquid metal and inerted cell testing and initial ascent to full power are discussed.

  1. XB-70A during startup and ramp taxi

    NASA Technical Reports Server (NTRS)

    1968-01-01

    The XB-70 was the world's largest experimental aircraft. Capable of flight at speeds of three times the speed of sound (2,000 miles per hour) at altitudes of 70,000 feet, the XB-70 was used to collect in-flight information for use in the design of future supersonic aircraft, military and civilian. This 35-second video shows the startup of the XB-70A airplane engines, the beginning of its taxi to the runway, and a turn on the ramp that shows the unique configuration of this aircraft.

  2. Activity Based Curriculum for Elementary Education. Additional Activities, K-6.

    ERIC Educational Resources Information Center

    Wichita Public Schools, KS.

    This elementary curriculum is a vehicle to provide manipulative activities that reinforce academic skills through meaningful, relevant, activity-based awareness of modern society. The twenty-six activity plans included in the curriculum place a major emphasis upon realistic or concrete experiences that deal with the manipulation and exploration of…

  3. Start-up performance of a full-scale riverbank filtration site regarding removal of DOC, nutrients, and trace organic chemicals.

    PubMed

    Regnery, Julia; Barringer, Jessica; Wing, Alexandre D; Hoppe-Jones, Christiane; Teerlink, Jennifer; Drewes, Jörg E

    2015-05-01

    The performance of a full-scale riverbank filtration facility in Colorado was evaluated from initial start-up over a period of seven years including the impact of seasonal variations to determine whether sustainable attenuation of various chemical constituents could be achieved. Both, annual and seasonal average concentrations were determined for several wastewater-derived constituents including dissolved organic carbon (DOC), ultraviolet absorbance at 254 nm, nitrate, phosphate for the years 2006, 2009, 2010, 2012, and trace organic chemicals (TOrC) for years 2009, 2010, and 2012. ANOVA analyses and Student's t-tests were performed to evaluate the consistency of contaminant attenuation at the site. Findings revealed no significant statistical differences for any of the bulk parameters with the exception of phosphate suggesting a highly reliable attenuation of DOC and nitrate from start-up to full-scale performance. Phosphate attenuation, however, exhibited a steady decline, which was likely attributed to exhaustion of sorption sites in the subsurface porous media. The river's flow regime influenced both occurrence levels and attenuation of TOrC during riverbank filtration, i.e. less river discharge resulted in higher TOrC concentrations and lower proportion of river water in the recovered groundwater. Differences in removal performance between annual data sets for caffeine, trimethoprim, sulfamethoxazole, and carbamazepine were caused by variations in the source; concentrations in riverbank filtrate remained similar over several years. The seasonal assessment for TOrC revealed steady or improving removal between winter and summer seasons based on the statistical analysis with atenolol being the only exception likely due to an increased microbial activity at elevated temperatures.

  4. Physics and optimization of plasma startup in the MST RFP

    NASA Astrophysics Data System (ADS)

    Mao, W.; Chapman, B. E.; Almagri, A. F.; Anderson, J. K.; den Hartog, D. J.; Ko, J.; Kumar, S. T. A.; Morton, L.; Parke, E.; Reusch, J. A.; Waksman, J.; Brower, D. L.; Ding, W. X.; Lin, L.

    2012-10-01

    MST's Bp circuit relies on an iron core transformer, and the 2 V-s flux swing of the iron sets limits on the peak Ip and discharge duration. A substantial fraction of this flux is consumed during startup of each discharge. To some extent, this flux consumption can be reduced by applying a larger vacuum Bt at discharge initiation, a fact long known in RFP research. However, the detailed physics of this Bt dependence is not completely understood. Toward better understanding, MST's profile diagnostics are being employed to try to measure the temporal evolution of, e.g., the magnetic equilibrium and plasma resistance. Initial target plasmas have a peak Ip of about 600 kA but with different vacuum Bt. Initial results include the observation of m = 1 modes, with n = 1, 2, 3... growing and decaying in succession. This occurs as the Bt profile evolves rapidly from that of a tokamak to that of an RFP. Preliminary reconstructions of the toroidal current profile suggest that it is initially quite hollow. This work should help optimize startup with MST's new Bt programmable power supply.

  5. DWPF STARTUP FRIT VISCOSITY MEASUREMENT ROUND ROBIN RESULTS

    SciTech Connect

    Crum, Jarrod V.; Edwards, Tommy B.; Russell, Renee L.; Workman, Phyllis J.; Schweiger, Michael J.; Schumacher, Ray F.; Smith, Donald E.; Peeler, David K.; Vienna, John D.

    2012-07-31

    A viscosity standard is needed to replace the National Institute of Standards and Technology (NIST) glasses currently being used to calibrate viscosity measurement equipment. The current NIST glasses are either unavailable or less than ideal for calibrating equipment to measure the viscosity of high-level waste glasses. This report documents the results of a viscosity round robin study conducted on the Defense Waste Processing Facility (DWPF) startup frit. DWPF startup frit was selected because its viscosity-temperature relationship is similar to most DWPF and Hanford high-level waste glass compositions. The glass underwent grinding and blending to homogenize the large (100 lb) batch. Portions of the batch were supplied to the laboratories (named A through H) for viscosity measurements following a specified temperature schedule with a temperature range of 1150 C to 950 C and with an option to measure viscosity at lower temperatures if their equipment was capable of measuring at the higher viscosities. Results were used to fit the Vogel-Tamman-Fulcher and Arrhenius equations to viscosity as a function of temperature for the entire temperature range of 460 C through 1250 C as well as the limited temperature interval of approximately 950 C through 1250 C. The standard errors for confidence and prediction were determined for the fitted models.

  6. Start-up of the reversed-field pinch in an adiabatic manner

    NASA Astrophysics Data System (ADS)

    Caramana, E. J.

    1981-03-01

    Purely adiabatic formation of a reversed-field pinch is examined as a possible means of access to diffuse, stable reversed-field equilibria. Ideal MHD equations describing adiabatic reversed-field pinch formation are solved to obtain the electric fields and plasma density at the wall characteristic of the initial state and the states through which the system must pass adiabatically. It is shown that if the states through which the plasma evolves adiabatically to a final Bessel-function model state decay resistively, the magnetic energy lost is small. The effects of resistive MHD activity analogous to that observed in tokamaks on reversed-field pinch start-up are also considered.

  7. Manual of Considerations and Techniques for Start-Up of Municipal Wastewater Treatment Facilities.

    ERIC Educational Resources Information Center

    Rader, R. D.; And Others

    This manual provides guidance for putting into initial operation a new municipal wastewater treatment plant, a new addition to an existing treatment plant, or a change in the mode of a treatment plant's operation. Information is provided on preparing for actual treatment plant start-up. Preparation for start-up includes: staffing the plant,…

  8. Experimental characterization of plasma start-up using ECRH in preparation of W7-X operation

    NASA Astrophysics Data System (ADS)

    Preynas, M.; Aßmus, D.; Igami, H.; Kado, S.; Kobayashi, S.; Kubo, S.; Laqua, H. P.; Mutoh, T.; Nagasaki, K.; Otte, M.; Shimozuma, T.; Stange, T.; Yoshimura, Y.

    2015-03-01

    The upcoming operation of Wendelstein 7-X (W7-X) will be supported by an Electron Cyclotron Resonance Heating (ECRH) system working at 140 GHz in second harmonic at the nominal magnetic field of 2.5T. Because the optimization of the plasma breakdown is crucial to ensure a successful plasma build-up, dedicated plasma start-up experiments were performed on three stellarator/heliotron devices: Heliotron J, LHD and WEGA. Start-up behavior and dependencies on ECRH injected power, neutral gas pressure and rotational transform were obtained in X2 heating. Plasma start-up delay time decreases with the increase in ECRH input power. However, this behavior saturates when low pre-fill neutral gas pressure conditions are met. Both the delay time and the electron density are an increasing function of the gas pressure. On Heliotron J and WEGA devices, the higher the rotational transform is, the faster the start-up and the higher the plasma density are. Analysis of the temporal evolution of the plasma start-up shows that plasma start-up on stellarators is a two-step process. In addition, off-axis heating experiments are characterized by a longer plasma start-up duration compared to on-axis heating discharges. Third harmonic in X-mode has been attempted on LHD for different neutral gas puffing settings but no plasma breakdown was achieved. This multi-machine study was useful to define ECRH start-up scenarios for W7-X.

  9. Resourcing Lab Experiments for New Ventures: The Potential of a Start-Up Database

    ERIC Educational Resources Information Center

    Pietrobon, Alberto

    2009-01-01

    This article responds to "Laboratory experiments as a tool in the empirical economic analysis of high-expectation start-ups" by Martin Curley and Piero Formica, published in the December 2008 issue of "Industry and Higher Education". Curley and Formica introduce a new concept for high-expectation start-ups, involving the use of "laboratory…

  10. 48 CFR 1631.205-77 - FEHBP start-up and other nonrecurring costs.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true FEHBP start-up and other nonrecurring costs. 1631.205-77 Section 1631.205-77 Federal Acquisition Regulations System OFFICE OF PERSONNEL... COST PRINCIPLES AND PROCEDURES Contracts With Commercial Organizations 1631.205-77 FEHBP start-up...

  11. 26 CFR 1.195-1 - Election to amortize start-up expenditures.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 26 Internal Revenue 3 2011-04-01 2011-04-01 false Election to amortize start-up expenditures. 1.195-1 Section 1.195-1 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED... (continued) § 1.195-1 Election to amortize start-up expenditures. For further guidance, see § 1.195-1T....

  12. 48 CFR 1631.205-77 - FEHBP start-up and other nonrecurring costs.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 6 2011-10-01 2011-10-01 false FEHBP start-up and other nonrecurring costs. 1631.205-77 Section 1631.205-77 Federal Acquisition Regulations System OFFICE OF PERSONNEL... COST PRINCIPLES AND PROCEDURES Contracts With Commercial Organizations 1631.205-77 FEHBP start-up...

  13. 26 CFR 1.195-1 - Election to amortize start-up expenditures.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 26 Internal Revenue 3 2010-04-01 2010-04-01 false Election to amortize start-up expenditures. 1.195-1 Section 1.195-1 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED....195-1 Election to amortize start-up expenditures. For further guidance, see § 1.195-1T....

  14. Going Boldly Into the Future: Skills and Australian High Technology Start-Up Firms.

    ERIC Educational Resources Information Center

    Whittingham, Karen

    The skill needs of Australian high-technology start-up companies and the implications of those skill needs for vocational education and training (VET) were examined through a study of 14 start-ups' inherent abilities to access the VET system and on VET's relevance to their needs. The case studies documented a strong demand and role for VET in the…

  15. Leadership toward Creativity in Virtual Work in a Start-Up Context

    ERIC Educational Resources Information Center

    Humala, Iris Annukka

    2015-01-01

    Purpose: This paper aims to better understand how to lead toward creativity in virtual work in a start-up context. Design/methodology/approach: The study investigates the participants' experiences about the learning challenges in leadership toward creativity in virtual work in a start-up company and the meanings attributed to their experiences,…

  16. Navigating the Interface between Design Education and Fashion Business Start-up

    ERIC Educational Resources Information Center

    Mills, Colleen E.

    2012-01-01

    Purpose: The purpose of this paper is to address the interface between design education and business start-up in the designer fashion industry (DFI) and provide a new framework for reflecting on ways to improve design education and graduates' business start-up preparedness. Design/methodology/approach: This interpretive study employed…

  17. 76 FR 50887 - Elections Regarding Start-Up Expenditures, Corporation Organizational Expenditures, and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-17

    ... Internal Revenue Service 26 CFR Part 1 RIN 1545-BE77 Elections Regarding Start-Up Expenditures, Corporation Organizational Expenditures, and Partnership Organizational Expenses AGENCY: Internal Revenue Service (IRS... final regulations relating to elections to deduct start-up expenditures, organizational expenditures...

  18. 76 FR 56973 - Elections Regarding Start-Up Expenditures, Corporation Organizational Expenditures, and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-15

    ... Internal Revenue Service 26 CFR Part 1 RIN 1545-BE77 Elections Regarding Start-Up Expenditures, Corporation Organizational Expenditures, and Partnership Organizational Expenses; Correction AGENCY: Internal Revenue Service... Wednesday, August 17, 2011 (76 FR 50887) relating to elections to deduct start-up...

  19. Numerical Simulation of Non-Inductive Startup of the Pegasus Toroidal Experiment

    NASA Astrophysics Data System (ADS)

    O'Bryan, John B.

    both sets of calculations. Synthetic Mirnov coils at the locations used in the experiment observe magnetic fluctuation amplitudes of order 5 % and significant activity in the 10-20 kHz range in agreement with experimental measurements. Based on the cross-power spectrograms, the two-fluid calculation more accurately reproduces the frequency response of the experimental dynamics.

  20. Data base management systems activities

    NASA Technical Reports Server (NTRS)

    1983-01-01

    The Data Management System-1100 is designed to operate in conjunction with the UNIVAC 1100 Series Operating System on any 1100 Series computer. DMS-1100 is divided into the following four major software components: (1) Data Definition Languages (DDL); (2) Data Management Routine (DMR); (3) Data Manipulation Languages (DML); and (4) Data Base Utilities (DBU). These software components are described in detail.

  1. Environmental risk assessment for start-up of a new consolidated maintenance facility

    SciTech Connect

    Heubach, J.G.; Wise, J.A.

    1992-10-01

    This paper summarizes a case study of a risk assessment for a consolidated maintenance facility (CMF). An interdisciplinary team was formed to identify and evaluate showstopper'' risks which could delay or prevent ontime, safe, and economical operation of a CMF and to recommend ways to mitigate the risks. The risk assessment was constrained by time, information, incomplete plans and facilities, and a concomitant major transition in manufacturing process, organization, and technology. Working within these constraints, the team integrated convergent findings into estimates of high, medium, and low risks based on the subjective likelihood of occurrence and predicted consequences of potential hazard events. The team also made risk-reduction recommendations for facility detail design and production start-up. The findings and recommendations reported in this study focus on risks related to environmental design and workstation ergonomics. Findings from the risk assessment effort should aid other constrained risk assessments and applied research on similar facilities.

  2. Numerical investigation of flow structure and pressure pulsation in the Francis-99 turbine during startup

    NASA Astrophysics Data System (ADS)

    Minakov, A.; Sentyabov, A.; Platonov, D.

    2017-01-01

    We performed numerical simulation of flow in a laboratory model of a Francis hydroturbine at startup regimes. Numerical technique for calculating of low frequency pressure pulsations in a water turbine is based on the use of DES (k-ω Shear Stress Transport) turbulence model and the approach of “frozen rotor”. The structure of the flow behind the runner of turbine was analysed. Shows the effect of flow structure on the frequency and intensity of non-stationary processes in the flow path. Two version of the inlet boundary conditions were considered. The first one corresponded measured time dependence of the discharge. Comparison of the calculation results with the experimental data shows the considerable delay of the discharge in this calculation. Second version corresponded linear approximation of time dependence of the discharge. This calculation shows good agreement with experimental results.

  3. A reload and startup plan for conversion of the NIST research reactor

    SciTech Connect

    D. J. Diamond

    2016-03-31

    The National Institute of Standards and Technology operates a 20 MW research reactor for neutron-based research. The heavy-water moderated and cooled reactor is fueled with high-enriched uranium (HEU) but a program to convert the reactor to low-enriched uranium (LEU) fuel is underway. Among other requirements, a reload and startup test plan must be submitted to the U.S. Nuclear Regulatory Commission (NRC) for their approval. The NRC provides guidance for what should be in the plan to ensure that the licensee has sufficient information to operate the reactor safely. Hence, a plan has been generated consisting of two parts. The reload portion of the plan specifies the fuel management whereby initially only two LEU fuel elements are in the core for eight fuel cycles. This is repeated until a point when the optimum approach is to place four fresh LEU elements into the reactor each cycle. This final transition is repeated and after eight cycles the reactor is completely fueled with LEU. By only adding two LEU fuel elements initially, the plan allows for the consumption of HEU fuel elements that are expected to be in storage at the time of conversion and provides additional qualification of production LEU fuel under actual operating conditions. Because the reload is to take place over many fuel cycles, startup tests will be done at different stages of the conversion. The tests, to be compared with calculations to show that the reactor will operate as planned, are the measurement of critical shim arm position and shim arm and regulating rod reactivity worths. An acceptance criterion for each test is specified based on technical specifications that relate to safe operation. Additional tests are being considered that have less safety significance but may be of interest to bolster the validation of analysis tools.

  4. 40 CFR 62.15165 - What happens to the emission limits during periods of startup, shutdown, and malfunction?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... during periods of startup, shutdown, and malfunction? 62.15165 Section 62.15165 Protection of Environment... emission limits during periods of startup, shutdown, and malfunction? (a) The emission limits of this subpart apply at all times except during periods of municipal waste combustion unit startup, shutdown,...

  5. 40 CFR 60.1205 - What happens to the operating requirements during periods of startup, shutdown, and malfunction?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... requirements during periods of startup, shutdown, and malfunction? 60.1205 Section 60.1205 Protection of... requirements during periods of startup, shutdown, and malfunction? (a) The operating requirements of this subpart apply at all times except during periods of municipal waste combustion unit startup, shutdown,...

  6. 40 CFR 60.1710 - What happens to the emission limits during periods of startup, shutdown, and malfunction?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... during periods of startup, shutdown, and malfunction? 60.1710 Section 60.1710 Protection of Environment... during periods of startup, shutdown, and malfunction? (a) The emission limits of this subpart apply at all times except during periods of municipal waste combustion unit startup, shutdown, or...

  7. 30 CFR 250.1917 - What criteria for pre-startup review must be in my SEMS program?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 2 2011-07-01 2011-07-01 false What criteria for pre-startup review must be in... pre-startup review must be in my SEMS program? Your SEMS program must require that the commissioning process include a pre-startup safety and environmental review for new and significantly...

  8. 40 CFR 60.1710 - What happens to the emission limits during periods of startup, shutdown, and malfunction?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... during periods of startup, shutdown, and malfunction? 60.1710 Section 60.1710 Protection of Environment... during periods of startup, shutdown, and malfunction? (a) The emission limits of this subpart apply at all times except during periods of municipal waste combustion unit startup, shutdown, or...

  9. 40 CFR 60.1205 - What happens to the operating requirements during periods of startup, shutdown, and malfunction?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... requirements during periods of startup, shutdown, and malfunction? 60.1205 Section 60.1205 Protection of... requirements during periods of startup, shutdown, and malfunction? (a) The operating requirements of this subpart apply at all times except during periods of municipal waste combustion unit startup, shutdown,...

  10. 40 CFR 62.15165 - What happens to the emission limits during periods of startup, shutdown, and malfunction?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... during periods of startup, shutdown, and malfunction? 62.15165 Section 62.15165 Protection of Environment... emission limits during periods of startup, shutdown, and malfunction? (a) The emission limits of this subpart apply at all times except during periods of municipal waste combustion unit startup, shutdown,...

  11. Dual-Fuel Truck Fleet: Start-Up Experience

    SciTech Connect

    NREL

    1998-09-30

    Although dual-fuel engine technology has been in development and limited use for several years, it has only recently moved toward full-scale operational capability for heavy-duty truck applications. Unlike a bifuel engine, which has two separate fuel systems that are used one at a time, a dual-fuel engine uses two fuel systems simultaneously. One of California's South Coast Air Quality Management District (SCAQMD) current programs is a demonstration of dual-fuel engine technology in heavy-duty trucks. These trucks are being studied as part of the National Renewable Energy Laboratory's (NREL's) Alternative Fuel Truck Program. This report describes the start-up experience from the program.

  12. Comprehensive School-Based Physical Activity Program

    ERIC Educational Resources Information Center

    Heidorn, Brent D.; Hall, Tina J.; Carson, Russell L.

    2010-01-01

    A Comprehensive School-based Physical Activity Program (CSPAP) represents a commitment to support the health and well-being of students, faculty, staff, and the community. A CSPAP is a similar approach that specifically focuses on incorporating additional physical activity opportunities for youth within the school day and beyond physical education…

  13. SuperJet International case study: a business network start-up in the aeronautics industry

    NASA Astrophysics Data System (ADS)

    Corallo, Angelo; de Maggio, Marco; Storelli, Davide

    This chapter presents the SuperJet International case study, a start-up in the aeronautics industry characterized by a process-oriented approach and a complex and as yet evolving network of partnerships and collaborations. The chapter aims to describe the key points of the start-up process, highlighting common factors and differences compared to the TEKNE Methodology of Change, with particular reference to the second and third phase, namely, the design and deployment of new techno-organizational systems. The SuperJet International startup is presented as a case study where strategic and organizational aspects have been jointly conceived from a network-driven perspective. The chapter compares some of the guidelines of the TEKNE Methodology of Change with experiences and actual practices deriving from interviews with key players in SJI's start-up process.

  14. Cool-down and frozen start-up behavior of a grooved water heat pipe

    NASA Technical Reports Server (NTRS)

    Jang, Jong Hoon

    1990-01-01

    A grooved water heat pipe was tested to study its characteristics during the cool-down and start-up periods. The water heat pipe was cooled down from the ambient temperature to below the freezing temperature of water. During the cool-down, isothermal conditions were maintained at the evaporator and adiabatic sections until the working fluid was frozen. When water was frozen along the entire heat pipe, the heat pipe was rendered inactive. The start-up of the heat pipe from this state was studied under several different operating conditions. The results show the existence of large temperature gradients between the evaporator and the condenser, and the moving of the melting front of the working fluid along the heat pipe. Successful start-up was achieved for some test cases using partial gravity assist. The start-up behavior depended largely on the operating conditions.

  15. Intelligent system for start-up of a petroleum offshore platform.

    PubMed

    Campos, M C; Satuf, E; de Mesquita, M

    2001-01-01

    It is difficult to control and to manage the start-up of a petroleum offshore platform. In order to solve this problem an intelligent system can play an important role, since available qualitative operator and design knowledge can be easily implemented to assist the operator during start-up. This paper describes the integration of an expert system with a fuzzy controller applied to such a process. The intelligent system has many heuristic rules to implement the automation of the start-up procedures, like the opening of many on-off valves while simultaneously monitoring process variables. It also has a fuzzy controller to optimize the opening of the oil wells, in order to minimize the start-up time. This intelligent system is being implemented in the platform P-19 of Petrobras, the Brazilian oil company, in Campos Basin, Brazil. The prototype has been operating since October 1998.

  16. Simulating the ITER Plasma Startup Scenario in the DIII-D Tokamak

    SciTech Connect

    Jackson, G; Casper, T; Luce, T; Humphreys, D; Ferron, J; Hyatt, A; Petrie, T; West, W

    2008-10-13

    DIII-D experiments have investigated ITER startup scenarios, including an initial phase where the plasma was limited on low field side (LFS) poloidal bumper limiters. Both the original ITER 'small-bore' (constant q{sub 95}) startup and a 'large-bore' lower internal inductance (l{sub i}) startup have been simulated. In addition, l{sub i} feedback control has been tested with the goal of producing discharges at the ITER design value, l{sub i}(3) = 0.85. These discharges have been simulated using the Corsica free boundary equilibrium code. High performance hybrid scenario discharges ({beta}{sub N} = 2.8, H{sub 98,y2} = 1.4) and ITER H-mode baseline discharges ({beta}{sub N} > 1.6, H{sub 98,y2} = 1-1.2) have been obtained experimentally in an ITER similar shape after the ITER-relevant startup.

  17. Diffusion-controlled startup of a gas-loaded liquid-metal heat pipe

    NASA Astrophysics Data System (ADS)

    Ponnappan, R.; Boehman, L. I.; Mahefkey, E. T.

    1990-07-01

    Liquid-metal heat pipes have exhibited difficulties starting up from a frozen-state. Inert gas loading is a possible solution to the frozen-state startup problem. The present study deals with the diffusion-controlled startup analysis and testing of an argon-loaded, 2-m-long, stainless steel-sodium heat pipe of the double-walled type with artery channel and long adiabatic section. A two-dimensional, quasi-steady state, binary vapor-gas diffusion model determined the energy transport rate of vapor at the diffusion front. The analytical solution to the diffusion problem provided the vapor flux, which in turn was used in the one-dimensional transient thermal model of the heat pipe to predict the time rate-of-change of temperature and position of the hot front. The experimental test results successfully demonstrated the startup of a gas-loaded sodium heat pipe and validated the diffusion model of the startup.

  18. 40 CFR 63.2852 - What is a startup, shutdown, and malfunction plan?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... CATEGORIES National Emission Standards for Hazardous Air Pollutants: Solvent Extraction for Vegetable Oil Production Compliance Requirements § 63.2852 What is a startup, shutdown, and malfunction plan? You...

  19. 40 CFR 63.2852 - What is a startup, shutdown, and malfunction plan?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... CATEGORIES National Emission Standards for Hazardous Air Pollutants: Solvent Extraction for Vegetable Oil Production Compliance Requirements § 63.2852 What is a startup, shutdown, and malfunction plan? You...

  20. Optimization of steam-vortex plasma-torch start-up

    NASA Astrophysics Data System (ADS)

    Mikhailov, B. I.

    2011-12-01

    We propose a new optimal method of steam-vortex plasma-torches start-up; this method completely prevents the danger of water steam condensation in the arc chamber and all undesirable consequences of it.

  1. Start-up simulation of a thermionic space nuclear reactor system

    SciTech Connect

    El-Genk, M.S.; Xue, H.; Paramonov, D. )

    1993-01-15

    The Thermionic Transient Analysis Model (TITAM) is used in this paper to simulate the start-up of the TOPAZ-II space nuclear power system in orbit. The start-up procedures simulated herein are assumed for the purpose of demonstrating the capabilities of the model and may not represent an accurate account of the actual start-up procedures of the TOPAZ-II system. The temperature reactivity feedback effects of the moderator, UO[sub 2] fuel, electrodes, coolant, and other components in the core are calculated and their effects on the thermal and criticality conditions of the reactor are investigated. Also, estimates of the time constants of the temperature reactivity feedback for the UO[sub 2] fuel and the ZrH moderator during start-up, as well as of the total temperature reactivity feedback as a function of the reactor steady-state thermal power, are obtained.

  2. Transient analysis and startup simulation of a thermionic space nuclear reactor system

    SciTech Connect

    El-Genk, M.S.; Xue, Huimin; Paramonov, D. . Dept. of Chemical and Nuclear Engineering)

    1994-01-01

    The thermionic transient analysis model is used to simulate the startup of the TOPAZ-2 space nuclear power system in orbit. The simulated startup procedures are assumed for the purpose of demonstrating the capabilities of the model and may not represent an accurate account of the actual startup procedures of the TOPAZ-2 system. The temperature reactivity feedback effects of the moderator, UO[sub 2] fuel, electrodes, coolant, and other components in the core are calculated, and their effects on the thermal and criticality conditions of the reactor are investigated. Also, estimates of the time constants of the temperature reactivity feedback for the UO[sub 2] fuel and the ZrH moderator during startup, as well as of the total temperature reactivity feedback as a function of the reactor steady-state thermal power, are obtained.

  3. Activated, coal-based carbon foam

    DOEpatents

    Rogers, Darren Kenneth; Plucinski, Janusz Wladyslaw

    2004-12-21

    An ablation resistant, monolithic, activated, carbon foam produced by the activation of a coal-based carbon foam through the action of carbon dioxide, ozone or some similar oxidative agent that pits and/or partially oxidizes the carbon foam skeleton, thereby significantly increasing its overall surface area and concurrently increasing its filtering ability. Such activated carbon foams are suitable for application in virtually all areas where particulate or gel form activated carbon materials have been used. Such an activated carbon foam can be fabricated, i.e. sawed, machined and otherwise shaped to fit virtually any required filtering location by simple insertion and without the need for handling the "dirty" and friable particulate activated carbon foam materials of the prior art.

  4. Activated, coal-based carbon foam

    SciTech Connect

    Rogers, Darren Kenneth; Plucinski, Janusz Wladyslaw

    2009-06-09

    An ablation resistant, monolithic, activated, carbon foam produced by the activation of a coal-based carbon foam through the action of carbon dioxide, ozone or some similar oxidative agent that pits and/or partially oxidizes the carbon foam skeleton, thereby significantly increasing its overall surface area and concurrently increasing its filtering ability. Such activated carbon foams are suitable for application in virtually all areas where particulate or gel form activated carbon materials have been used. Such an activated carbon foam can be fabricated, i.e. sawed, machined and otherwise shaped to fit virtually any required filtering location by simple insertion and without the need for handling the "dirty" and friable particulate activated carbon foam materials of the prior art.

  5. Patterns in Student Perceptions of Start-Up and Conversion Small High Schools

    ERIC Educational Resources Information Center

    Feldman, Jay; O'Dwyer, Anne

    2010-01-01

    Schools created as part of the small schools movement have been in operation for almost a decade, allowing identification of patterns in their growth. This study examines 4 years of survey data on 12 start-up and 13 conversion small high schools. Start-up small schools, almost all of which began with one grade level and grew by one grade per year,…

  6. LESSONS LEARNED - STARTUP AND TRANSITION TO OPERATIONS AT THE 200 WEST PUMP AND TREAT FACILITY

    SciTech Connect

    FINK DE; BERGQUIST GG; BURKE SP

    2012-10-03

    This document lists key Lessons Learned from the Startup Team for the 200 West Pump and Treat Facility Project. The Startup Team on this Project was an integrated, multi-discipline team whose scope was Construction Acceptance Testing (CAT), functional Acceptance Testing Procedures (ATP), and procedure development and implementation. Both maintenance and operations procedures were developed. Included in the operations procedures were the process unit operations. In addition, a training and qualification program was also part of the scope.

  7. Plasma Current Start-up by ECW and Vertical Field in the TST-2 Spherical Tokamak

    NASA Astrophysics Data System (ADS)

    Mitarai, Osamu; Takase, Yuichi; Ejiri, Akira; Shiraiwa, Syunichi; Kasahara, Hiroshi; Yamada, Takuma; Ohara, Shinya; TST-2 Team; Nakamura, Kazuo; Iyomasa, Atsuhiro; Hasegawa, Makoto; Idei, Hiroshi; Sakamoto, Mizuki; Hanada, Kazuaki; Satoh, Kohnosuke; Zushi, Hideki; TRIAM Group; Nishino, Nobuhiro

    Plasma current start-up and ramp-up to 10 kA have been demonstrated in the TST-2 spherical tokamak without the use of the central solenoid. Only the electron cyclotron wave (ECW) and the outer equilibrium field coils are used. The plasma current evolution depends on the poloidal coil arrangement. It is also demonstrated that the plasma current start-up can take place without the field null.

  8. Electron cyclotron plasma startup in the GDT experiment

    NASA Astrophysics Data System (ADS)

    Yakovlev, D. V.; Shalashov, A. G.; Gospodchikov, E. D.; Solomakhin, A. L.; Savkin, V. Ya.; Bagryansky, P. A.

    2017-01-01

    We report on a new plasma startup scenario in the gas dynamic trap (GDT) magnetic mirror device. The primary 5 MW neutral beam injection (NBI) plasma heating system fires into a sufficiently dense plasma target (‘seed plasma’), which is commonly supplied by an arc plasma generator. In the reported experiments, a different approach to seed plasma generation is explored. One of the channels of the electron cyclotron resonance (ECR) heating system is used to ionize the neutral gas and build up the density of plasma to a level suitable for NBI capture. After a short transition of approximately 1 ms the discharge becomes essentially similar to a standard one initiated by the plasma gun. This paper presents the discharge scenario and experimental data on the seed plasma evolution during ECRH, along with the dependencies on incident microwave power, magnetic configuration and pressure of a neutral gas. The characteristics of the consequent high-power NBI discharge are studied and differences from the conventional scenario are discussed. A theoretical model describing the ECR breakdown and the seed plasma accumulation in a large-scale mirror trap is developed on the basis of the GDT experiment.

  9. Startup, shutdown and malfunction plans coming for large industrial boilers

    SciTech Connect

    Kasarabada, A.N.

    2007-08-15

    The US Boiler MACT (maximum achievable control technology) regulations (codified under 40 CFR Part 63) in its current form requires existing large coal-fired industrial and utility boilers (under 25 MW) to meet emission limits for particulate matter or total selected metals, mercury and hydrogen chloride, as well as other operational limits. The MACT provision also requires affected facilities to develop startup, shutdown and malfunction plans (SSMP). The original date for Boiler MACT compliance for existing units had been 13 September 2007. However, on 8 June the US Court of Appeals for the District of Columbia issued an order effectively killing all existing MACT rules for industrial boilers. The Court instructed the US EPA to rewrite two sets of regulations. (Prior to April 2006 the MACT general provisions said the SSMPs needed to be 'developed and implemented'.) It seems unlikely that any new revision of the Boiler MACT by the EPA will take effect before mid-2008. Regardless of which direction the MACT rule is headed, now is the time to be prepared to comply with the SSMP requirements. The article sets out recommended steps for developing an effective SSMP.

  10. Construction and startup experience for Milliken FGD Retrofit Project

    SciTech Connect

    Harvilla, J.; Mahlmeister, M.; Buchanan, T.; Jackson, C.; Watts, J.

    1996-12-01

    Under Round 4 of the U.S. Department of Energy`s Clean Coal Technology program, New York State Electric & Gas Corp. (NYSEG), in partnership with Saarbereg-Stebbins Engineering and Manufacturing Company, has retrofitted a formic acid enhanced forced oxidation wet limestone scrubber on Units 1 & 2 at the Milliken Steam Electric Station. Units 1 & 2 are 1950`s vintage Combustion Engineering tangentially fired pulverized coal units which are rated at nominal 150 MW each and operate in balanced draft mode. The FGD system for Unit 2 was placed into operation in January 1995 and the Unit 1 system in June, 1995. The project incorporates several unique aspects including low pH operation, a ceramic tile-lined cocurrent/countercurrent, split module absorber, a wet stack supported on the roof of the FGD building, and closed loop, zero liquid discharge operation producing commercial grade gypsum, and calcium chloride brine. The project objectives include 98% SO{sub 2} removal efficiency while burning high sulfur coal, the production of marketable byproducts to minimize solid waste disposal, zero wastewater discharge and space-saving design. The paper provides a brief overview of the project design, discusses construction and startup issues and presents early operating results. Process capital cost and economics of this design, procure and construct approach are reviewed relative to competing technologies.

  11. Startup, Commissioning and Operation of Fenyi 100MW CFB Boiler

    NASA Astrophysics Data System (ADS)

    Wang, Zhiwei; Yu, Wugao; Bo, Shi

    The first 100MW CFB boiler, designed by the Thermal Power Research Institute and manufactured by Harbin Boiler Company Limited, has been successfully running in Jiangxi Fenyi Power Plant since 2003. Local high ash content anthracite and lean coal that are very difficult to burn out are used in the 100 MW CFB boiler. The results of the 100MW CFB boiler shows that the CFB boiler can run in 30% MCR and startup with two under bed burners, and the boiler efficiency higher than 88% can be got after the combustion modification test. The CFB boiler can be operated with full load and reaches design parameters. The emissions of NO, N2O and CO are less than 7Omg/m3, 30mg/m3, and 125mg/m3, respectively, and SO2 less than 400mg/m3 after limestone injection. The bottom ash temperature from bed ash coolers is less than 120°C after its modification. Coal blockage at the coal storage silo is the main problem influencing the CFB boiler continuous operation. The running experiences for 5 years proved that the CFB boiler performance is successful, and the results were applied in 210 MW and 330 MW CFB Boiler design of Fenyi Power Plant.

  12. Advancing Non-Solenoidal Startup on the Pegasus ST

    NASA Astrophysics Data System (ADS)

    Reusch, J. A.; Barr, J. L.; Bodner, G. M.; Bongard, M. W.; Burke, M. G.; Fonck, R. J.; Pachicano, J. L.; Perry, J. M.; Richner, N. J.; Rodriguez Sanchez, C.; Schlossberg, D. J.

    2016-10-01

    The Pegasus experiment utilizes compact, edge-localized current sources (Ainj 2 - 4 cm2, Iinj 10 kA, Vinj 1 kV) for non-solenoidal local helicity injection (LHI) startup. Recent campaigns are comparing two injector geometries that vary the differing relative contributions of DC helicity input and non-solenoidal inductive voltages. A predictive 0-D model that treats the plasma as a resistive element with time-varying inductance and enforces Ip limits from Taylor relaxation was tested with inward growth of the plasma current channel using injectors on the outboard midplane. Strong inductive drive arises from plasma shape evolution and poloidal field (PF) induction. A major unknown in the model is the resistive dissipation, and hence the electron confinement. Te (R) profile measurements in LHI show centrally-peaked Te > 100 eV while the plasma is coupled to the injectors, suggesting LHI confinement is not strongly stochastic. A second campaign utilizes new injectors in the lower divertor region. This geometry trades subtler relaxation field programming and reduced PF induction for higher HI rates. Present efforts are developing relaxation methods at high BT, with relaxation at BT , inj > 0.15 T achieved to date via higher Iinj and PF manipulation. Conceptual design studies of coaxial helicity injection (CHI) and ECH heating systems for Pegasus have been initiated to explore direct comparison of LHI to CHI with and without ECH assist. Supported by US DOE Grants DE-FG02-96ER54375, DE-SC0006928.

  13. Magnetic Start-up Inducement in NOVILLO Tokamak

    NASA Astrophysics Data System (ADS)

    Melendez-Lugo, Leandro; Chavez, Esteban; Barocio, Samuel R.; Flores, Angel; Cruz, Guillermo J.; Guadalupe Olayo, M.

    2000-10-01

    Most tokamak devices require one or more breakdown assistance systems, such as particles or ECRH radiation, in order to develop plasma discharges by increasing the probabilities of ionization. In smaller tokamaks filament preionization traditionally primes the start-up, reducing the required amounts of loop voltage and OHT flux consumption. Yet, the latter not only may result obtrusive to the operational access but also its incandescence contributes to raise the plasma impurity levels. A new vertical field profile, superimposed to the stray field component parallel to the equilibrium field, has been created in NOVILLO tokamak by means of two additional compensation poloidal coils. Such arrangement of the vertical field profiles, with an 1/R-dependence, has been found adequate to achieve the plasma breakdown without any preionization system. Furthermore, evidence has been gathered indicating that tokamak discharges achieved by vertical stray field modification instead of preionization allow to operate with higher prefill pressure and therefore to create denser plasmas at standard loop voltage levels. A technique like the one presented here may prove suitable to accomplish dependable discharges on large tokamaks while saving costs considerably. Likewise this technique is feasible to be applied successfully in general toroidal gas breakdown and arcing processes.

  14. Start-up rhetoric in eight speeches of Barack Obama.

    PubMed

    O'Connell, Daniel C; Kowal, Sabine; Sabin, Edward J; Lamia, John F; Dannevik, Margaret

    2010-10-01

    Our purpose in the following was to investigate the start-up rhetoric employed by U.S. President Barack Obama in his speeches. The initial 5 min from eight of his speeches from May to September of 2009 were selected for their variety of setting, audience, theme, and purpose. It was generally hypothesized that Barack Obama, widely recognized for the excellence of his rhetorical performance, would pursue both constant and variable strategies in his effort to establish contact with his audience. More specifically, it was hypothesized that the make-up of the audience--primarily native or non-native speakers of English--would be a prominent independent variable. A number of temporal and verbal measures were used as dependent variables. Variations were evident in mean length in syllables and duration in seconds of utterances (articulatory phrases), articulation rate in syllables per second of ontime, mean duration of silent pauses in seconds, and frequency of fillers, hesitations, colloquial words and phrases, introductory phrases, and 1st person singular pronominals. Results indicated that formality versus informality of the setting and presence or absence of a teleprompter were more prominent than native versus non-native audiences. Our analyses confirm Obama's skillfulness in challenging and variable settings and clearly detect orderliness and scientific generalizability in language use. The concept of orality/literacy provides a theoretical background and emphasizes dialogical interaction of audience and speaker.

  15. Assessment of the plasma start-up in Wendelstein 7-X with neutral beam injection

    NASA Astrophysics Data System (ADS)

    Gradic, D.; Dinklage, A.; Brakel, R.; McNeely, P.; Osakabe, M.; Rust, N.; Wolf, R.; the W7-X Team; the LHD Experimental Group

    2015-03-01

    Plasma start-up by neutral beam injection was investigated for stellarators. A zero-dimensional collisional model was extended to evaluate the temporal evolution of the plasma start-up in a confining toroidal magnetic field. Inclusion of different beam energy components indicated a substantial effect due to the energy dependence of beam-gas collisions. Additional collision processes and particle equations were considered to simulate the plasma start-up in helium-hydrogen mixtures. The isotope effect between operation with hydrogen and deuterium beams was also investigated. As a major objective the conditions necessary for a plasma start-up with neutral beams in W7-X have been examined. The assessed beam configuration in W7-X was found not to allow plasma start-up by neutral beam injection alone. The model has been validated for experimental data from W7-AS and Large Helical Device. Quantitative predictions of this study show that the ratio of the beam-plasma interaction length and the plasma volume is an essential quantity for the successful plasma start-up with neutral beams.

  16. Structure-Based Predictions of Activity Cliffs

    PubMed Central

    Husby, Jarmila; Bottegoni, Giovanni; Kufareva, Irina; Abagyan, Ruben; Cavalli, Andrea

    2015-01-01

    In drug discovery, it is generally accepted that neighboring molecules in a given descriptors' space display similar activities. However, even in regions that provide strong predictability, structurally similar molecules can occasionally display large differences in potency. In QSAR jargon, these discontinuities in the activity landscape are known as ‘activity cliffs’. In this study, we assessed the reliability of ligand docking and virtual ligand screening schemes in predicting activity cliffs. We performed our calculations on a diverse, independently collected database of cliff-forming co-crystals. Starting from ideal situations, which allowed us to establish our baseline, we progressively moved toward simulating more realistic scenarios. Ensemble- and template-docking achieved a significant level of accuracy, suggesting that, despite the well-known limitations of empirical scoring schemes, activity cliffs can be accurately predicted by advanced structure-based methods. PMID:25918827

  17. Mechanism of base activation of persulfate.

    PubMed

    Furman, Olha S; Teel, Amy L; Watts, Richard J

    2010-08-15

    Base is the most commonly used activator of persulfate for the treatment of contaminated groundwater by in situ chemical oxidation (ISCO). A mechanism for the base activation of persulfate is proposed involving the base-catalyzed hydrolysis of persulfate to hydroperoxide anion and sulfate followed by the reduction of another persulfate molecule by hydroperoxide. Reduction by hydroperoxide decomposes persulfate into sulfate radical and sulfate anion, and hydroperoxide is oxidized to superoxide. The base-catalyzed hydrolysis of persulfate was supported by kinetic analyses of persulfate decomposition at various base:persulfate molar ratios and an increased rate of persulfate decomposition in D(2)O vs H(2)O. Stoichiometric analyses confirmed that hydroperoxide reacts with persulfate in a 1:1 molar ratio. Addition of hydroperoxide to basic persulfate systems resulted in rapid decomposition of the hydroperoxide and persulfate and decomposition of the superoxide probe hexachloroethane. The presence of superoxide was confirmed with scavenging by Cu(II). Electron spin resonance spectroscopy confirmed the generation of sulfate radical, hydroxyl radical, and superoxide. The results of this research are consistent with the widespread reactivity reported for base-activated persulfate when it is used for ISCO.

  18. Polydopamine as a new modification material to accelerate startup and promote anode performance in microbial fuel cells

    NASA Astrophysics Data System (ADS)

    Du, Qing; An, Jingkun; Li, Junhui; Zhou, Lean; Li, Nan; Wang, Xin

    2017-03-01

    The bacterial anode material is important to the performance of microbial fuel cells (MFCs) because its characteristics affect the biofilm formation and extracellular electron transfer. Here we find that a superhydrophilic semiconductor, polydopamine (PDA), is an effective modification material for the anode to accelerate startup and improve power density. When the activated carbon anode is added with 50% (wt.) PDA, the startup time is 14% shorter than the control (from 88 h to 76 h), with a 31% increase in maximum power density from 613 ± 9 to 803 ± 6 mW m-2, and the Columbic efficiency increases from 19% to 48%. These can be primarily attributed to the abundant functional groups (such as amino group, and catechol functions) introduced by PDA that improve hydrophilicity and extracellular electron transfer. PDA also increases proportions of Proteobacteria and Firmicutes families, indicating that PDA has a selective effect on anode microbial community. Our findings provide a new approach to accelerate anode biofilm formation and enhance MFC power output by modification of biocompatible PDA.

  19. Comparison of degradation behaviors for open-ended and closed proton exchange membrane fuel cells during startup and shutdown cycles

    NASA Astrophysics Data System (ADS)

    Yu, Yi; Tu, Zhengkai; Zhang, Haining; Zhan, Zhigang; Pan, Mu

    As catalyst support materials, the oxidation of carbon materials is considered one of the major factors for performance decay during the startup and shutdown process of proton exchange membrane fuel cells, which must be mitigated to achieve acceptable durability. In this paper, the effect of cathode exhaust conditions on the degradation behaviors of fuel cells is investigated using two single cells named the open-ended and closed cells. The cathode inlet pressure during the introduction of the dummy load is an important factor in analyzing the performance decay of membrane electrode assemblies under different conditions. Electrochemical techniques, including the measurement of polarization curves, cyclic and linear sweep voltammetry, and cross-sectional scanning electron microscopy of tested membrane electrode assemblies, are employed to evaluate the performance decay of fuel cells. The results show that a closed cathode exhaust valve during the introduction of the dummy load would significantly alleviate both the performance decay and the decrease in the electrochemically active surface area, resulting in an improvement in fuel cell durability. No significant deterioration of the membranes is observed for both the open-ended and the closed cells during frequent startup and shutdown processes.

  20. Ion cyclotron resonance heating (ICRH) start-up antenna for the mirror fusion test facility (MFTF-B)

    SciTech Connect

    McCarville, T.M.; Romesser, T.E.

    1985-10-02

    The purpose of the ICRH start-up antenna on MFTF-B is to heat the plasma and control the ion distribution as the density increases during start-up. The antenna, consisting of two center fed half turn loops phased 180/sup 0/ apart, has been designed for 1 MW of input power, with a goal of coupling 400 kW into the ions. To vary the heating frequency relative to the local ion cyclotron frequency, the antenna is tunable over a range from 7.5 to 12.5 MHz. The thermal requirements common to low duty cycle ICRH antennas are especially severe for the MFTF-B antenna. The stress requirements are also unique, deriving from the possibility of seismic activity or JxB forces if the magnets unexpectedly quench. Considerable attention has been paid to contact control at high current bolt-up joints, and arranging geometries so as to minimize the possibility of voltage breakdown.

  1. Anticancer Activity of Stilbene-based Derivatives.

    PubMed

    De Filippis, Barbara; Ammazzalorso, Alessandra; Fantacuzzi, Marialuigia; Giampietro, Letizia; Maccallini, Cristina; Amoroso, Rosa

    2017-03-07

    Anticancer Activity of Stilbene-based Derivatives Barbara De Filippis,* Alessandra Ammazzalorso, Marialuigia Fantacuzzi, Letizia Giampietro, Cristina Maccallini, Rosa Amoroso Dipartimento di Farmacia, Università "G. d'Annunzio", via dei Vestini 31, 66100 Chieti, Italy; * E-mail: barbara.defilippis@unich.it Stilbene is a very present structural scaffold in nature and stilbene-based compounds are largely described for their biological activity such as cardioprotective, potent antioxidant, anti-inflammatory, and anticancer agents. Starting from their potent chemotherapeutic activity against a wide variety of cancers, stilbene scaffold of resveratrol has been subjected to synthetic manipulations with the aim to obtaining new resveratrol analogues with improved anticancer activity and better bioavailability. In the last decade, majority of new synthetic stilbenoids demonstrated significant anticancer activity against a large number of cancer cell lines employed, depending on the type and position of substituents on stilbene skeleton. Given the importance of this topic and the vast therapeutic potential, especially in the field of cancer research, in the last years, some reviews have been published focusing on general pharmacological activity or, more recently, on the usefulness of hybrid molecule containing stilbene scaffold. The present review article focuses on the pharmacological profile of the key compounds containing stilbene scaffold and classify them on the type of structural modifications in stilbene skeleton.

  2. Start-up vortex flow past an accelerated flat plate

    NASA Astrophysics Data System (ADS)

    Xu, Ling; Nitsche, Monika

    2015-03-01

    Viscous flow past a finite flat plate accelerating in the direction normal to itself is studied numerically. The plate moves with nondimensional speed tp, where p = 0, 1/2, 1, 2. The work focuses on resolving the flow at early to moderately large times and determining the dependence on the acceleration parameter p. Three stages in the vortex evolution are identified and quantified. The first stage, referred to as the Rayleigh stage [Luchini and Tognaccini, "The start-up vortex issuing from a semi-infinite flat plate," J. Fluid Mech. 455, 175-193 (2002)], consists of a vortical boundary layer of roughly uniform thickness surrounding the plate and its tip, without any separating streamlines. This stage is present only for p > 0, for a time-interval that scales like p3, as p → 0. The second stage is one of self-similar growth. The vortex trajectory and circulation satisfy inviscid scaling laws, the boundary layer thickness satisfies viscous laws. The self-similar trajectory starts immediately after the Rayleigh stage ends and lasts until the plate has moved a distance d = 0.5 to 1 times its length. Finally, in the third stage, the image vorticity due to the finite plate length becomes relevant and the flow departs from self-similar growth. The onset of an instability in the outer spiral vortex turns is also observed, however, at least for the zero-thickness plate considered here, it is shown to be easily triggered numerically by underresolution. The present numerical results are compared with experimental results of Pullin and Perry ["Some flow visualization experiments on the starting vortex," J. Fluid Mech. 97, 239-255 (1980)], and numerical results of Koumoutsakos and Shiels ["Simulations of the viscous flow normal to an impulsively started and uniformly accelerated flat plate," J. Fluid Mech. 328, 177-227 (1996)].

  3. Rodent model of activity-based anorexia.

    PubMed

    Carrera, Olaia; Fraga, Ángela; Pellón, Ricardo; Gutiérrez, Emilio

    2014-04-10

    Activity-based anorexia (ABA) consists of a procedure that involves the simultaneous exposure of animals to a restricted feeding schedule, while free access is allowed to an activity wheel. Under these conditions, animals show a progressive increase in wheel running, a reduced efficiency in food intake to compensate for their increased activity, and a severe progression of weight loss. Due to the parallelism with the clinical manifestations of anorexia nervosa including increased activity, reduced food intake and severe weight loss, the ABA procedure has been proposed as the best analog of human anorexia nervosa (AN). Thus, ABA research could both allow a better understanding of the mechanisms underlying AN and generate useful leads for treatment development in AN.

  4. Space based astronomy: Teacher's guide with activities

    NASA Technical Reports Server (NTRS)

    Rosenberg, Carla B. (Editor); Weiler, Edward; Morrow, Cherilyn; Bacon, Pamela M.; Thorne, Muriel; Blanchard, Paul A.; Howard, Sethane; Pengra, Patricia R.; Brown, Deborah A.; Winrich, Ralph

    1994-01-01

    This curriculum guide uses hands-on activities to help students and teachers understand the significance of space-based astronomy - astronomical observations made from outer space. The guide contains few of the traditional activities found in many astronomy guides such as constellation studies, lunar phases, and planetary orbits. Instead, it tells the story of why it is important to observe celestial objects from outer space and how to study the entire electromagnetic spectrum. The guide begins with a survey of astronomy related NASA spacecraft. This is followed by a collection of activities in four units: (1) the atmospheric filter; (2) the electromagnetic spectrum; (3) collecting electromagnetic radiation; and (4) down to Earth. A curriculum index identifies the curriculum areas each activity addresses. The guide concludes with a glossary, reference list, a NASA Resources list, and an evaluation card. It is designed for students in grades 5 through 8.

  5. Water transport during startup and shutdown of polymer electrolyte fuel cell stacks.

    SciTech Connect

    Wang, X.; Tajiri, K.; Ahluwalia, R.; Nuclear Engineering Division

    2010-10-01

    A dynamic three-phase transport model is developed to analyze water uptake and transport in the membrane and catalyst layers of polymer electrolyte fuel cells during startup from subfreezing temperatures and subsequent shutdown. The initial membrane water content (?, the number of water molecules per sulfonic acid site) is found to be an important parameter that determines whether a successful unassisted self-start is possible. For a given initial subfreezing temperature at startup, there is a critical ? (?h), above which self-start is not possible because the product water completely engulfs the catalyst layers with ice before the stack can warm-up to 0 C. There is a second value of ? (?l), below which the stack can be self-started without forming ice. Between ?l and ?h, the stack can be self-started, but with intermediate formation of ice that melts as the stack warms up to 0 C. Both ?l and ?h are functions of the initial stack temperature, cell voltage at startup, membrane thickness, catalyst loading, and stack heat capacity. If the stack is purged during the previous shutdown by flowing air in the cathode passages, then depending on the initial amount of water in the membrane and gas diffusion layers and the initial stack temperature, it may not be possible to dry the membrane to the critical ? for a subsequent successful startup. There is an optimum ? for robust and rapid startup and shutdown. Startup and shutdown time and energy may be unacceptable if the ? is much less than the optimum. Conversely, a robust startup from subfreezing temperatures cannot be assured if the ? is much higher than this optimum.

  6. DNA-based control of protein activity

    PubMed Central

    Engelen, W.; Janssen, B. M. G.

    2016-01-01

    DNA has emerged as a highly versatile construction material for nanometer-sized structures and sophisticated molecular machines and circuits. The successful application of nucleic acid based systems greatly relies on their ability to autonomously sense and act on their environment. In this feature article, the development of DNA-based strategies to dynamically control protein activity via oligonucleotide triggers is discussed. Depending on the desired application, protein activity can be controlled by directly conjugating them to an oligonucleotide handle, or expressing them as a fusion protein with DNA binding motifs. To control proteins without modifying them chemically or genetically, multivalent ligands and aptamers that reversibly inhibit their function provide valuable tools to regulate proteins in a noncovalent manner. The goal of this feature article is to give an overview of strategies developed to control protein activity via oligonucleotide-based triggers, as well as hurdles yet to be taken to obtain fully autonomous systems that interrogate, process and act on their environments by means of DNA-based protein control. PMID:26812623

  7. Advances in Steady Inductive Helicity Injection for Plasma Startup and Toroidal Current Drive

    NASA Astrophysics Data System (ADS)

    Victor, Brian S.; Jarboe, Thomas R.; Hossack, Aaron C.; Ennis, David A.; Nelson, Brian A.; Hansen, Chris J.; Wrobel, Jonathan S.

    The Helicity Injected Torus with Steady Inductive Helicity Injection (HIT-SI) has achieved a breakthrough in the development of a new method of toroidal plasma startup and current drive. HIT-SI accomplishes helicity injection current drive on a spheromak of major radius 0.3 m with two injectors driven sinusoidally at 14.5 kHz. Results include the first sustainment of toroidal plasma current of over 50 kA at up to 3 times the injected currents added in quadrature. Separatrix toroidal currents—currents not linking the helicity injectors—are sustained at up to 40 kA. Toroidal currents persist for up to 0.65 ms after the injectors are turned off. Results are achieved after helium operations condition the alumina plasma-facing surface. The conditioned alumina walls then act to pump the deuterium, thereby reducing the spheromak density. High performance discharges (Itor/Iinj ≥ 2) are characterized by a decrease in the n = 1 mode activity measured by surface probes near the midplane of the confinement volume. Suppression of internal magnetic fields (measured by an internal probe) below the predicted Taylor equilibrium indicates that the magnetic fields in HIT-SI can no longer be described by a zero pressure, constant λ equilibrium.

  8. Reduction of start-up time through bioaugmentation process in microbial fuel cells using an isolate from dark fermentative spent media fed anode.

    PubMed

    Pandit, Soumya; Khilari, Santimoy; Roy, Shantonu; Ghangrekar, M M; Pradhan, Debabrata; Das, Debabrata

    2015-01-01

    An electrochemically active bacteria Pseudomonas aeruginosa IIT BT SS1 was isolated from a dark fermentative spent media fed anode, and a bioaugmentation technique using the isolated strain was used to improve the start-up time of a microbial fuel cell (MFC). Higher volumetric current density and lower start-up time were observed with the augmented system MFC-PM (13.7 A/m(3)) when compared with mixed culture MFC-M (8.72 A/m(3)) during the initial phase. This enhanced performance in MFC-PM was possibly due to the improvement in electron transfer ability by the augmented strain. However, pure culture MFC-P showed maximum volumetric current density (17 A/m(3)) due to the inherent electrogenic properties of Pseudomonas sp. An electrochemical impedance spectroscopic (EIS) study, along with matrix-assisted laser desorption/ionization-time-of-flight (MALDI-TOF) analysis, supported the influence of isolated species in improving the MFC performance. The present study indicates that the bioaugmentation strategy using the isolated Pseudomonas sp. can be effectively utilized to decrease the start-up time of MFC.

  9. Preliminary investigation of flow dynamics during the start-up of a bulb turbine model

    NASA Astrophysics Data System (ADS)

    Coulaud, M.; Fraser, R.; Lemay, J.; Duquesne, P.; Aeschlimann, V.; Deschênes, C.

    2016-11-01

    Nowadays, the electricity network undergoes more perturbations due to the market demand. Additionally, an increase of the production from alternative resources such as wind or solar also induces important variations on the grid. Hydraulic power plants are used to respond quickly to these variations to stabilize the network. Hydraulic turbines have to face more frequent start-up and stop sequences that might shorten significantly their life time. In this context, an experimental analysis of start-up sequences has been conducted on the bulb turbine model of the BulbT project at the Hydraulic Machines Laboratory (LAMH) of Laval University. Maintaining a constant head, guide vanes are opened from 0 ° to 30 °. Three guide vanes opening speed have been chosen from 5 °/s to 20 °/s. Several repetitions were done for each guide vanes opening speed. During these sequences, synchronous time resolved measurements have been performed. Pressure signals were recorded at the runner inlet and outlet and along the draft tube. Also, 25 pressure measurements and strain measurements were obtained on the runner blades. Time resolved particle image velocimetry were used to evaluate flowrate during start-up for some repetitions. Torque fluctuations at shaft were also monitored. This paper presents the experimental set-up and start-up conditions chosen to simulate a prototype start-up. Transient flowrate methodology is explained and validation measurements are detailed. The preliminary results of global performances and runner pressure measurements are presented.

  10. Experimental investigation of reducing startup time on capillary pumped loop with EHD assistance

    NASA Astrophysics Data System (ADS)

    Mo, Bingjian; Ohadi, Michael M.; Dessiatoun, Serguei V.; Kim, Jeong (Jake) H.; Cheung, Kwok

    1998-01-01

    The capillary pump loop (CPL) is the current state-of-the-art space cooling system. It provides higher cooling capacity than most heat pipes, more installation flexibility, and much greater distance of heat transport due to the small diameter of wickless transport lines. Major disadvantages of the CPL include long and complicated startup procedures and the possibility of depriming at high heat input and load variation. The presented work was an experimental study to characterize the startup process for an EHD-assisted CPL system. Startup is achieved by an almost stable differential pressure and average temperature at the evaporator wall. When the electric field is applied, it interacts with the vapor/liquid distribution inside the core and the wick. It also provides an additional pumping effect of liquid to the evaporator surface. As a result, less time is needed to build up the meniscus. Furthermore, the instability-induced EHD pumping at liquid-vapor interface pushes the liquid-vapor interface near the evaporator wall to enhance the phase-change. These EHD-enhanced mechanisms collaborate to reduce the required duration at different regimes and hence realize the EHD-reducing startup time for a CPL system. Experimental data showed that about 50% startup time, reduction was attainable.

  11. Lunar base activities and the lunar environment

    NASA Technical Reports Server (NTRS)

    Vondrak, Richard R.

    1992-01-01

    The Moon is an attractive site for astronomical observatories and other facilities because of the absence of a substantial lunar atmosphere and the stability of the lunar surface. The present lunar atmosphere is sufficiently transparent that there is no significant image distortion due to absorption or refraction. This thin atmosphere results from a combination of small sources and prompt losses. The major source that has been identified is the solar wind, whose total mass input into the lunar atmosphere is approximately 50 gm/sec. The major components of the solar wind are light elements (H and He) that promptly escape from the lunar surface by exospheric evaporation (Jeans' escape). The principal atmospheric loss mechanism for heavier gases is photoionization within a period of weeks to months, followed by immediate loss to the solar wind. Lunar base activities will modify the lunar atmosphere if gas is released at a larger rate than that now occurring naturally. Possible gas sources are rocket exhaust, processing of lunar materials, venting of pressurized volumes, and astronaut life support systems. For even modest lunar base activity, such sources will substantially exceed natural sources, although effects are expected to be localized and transient. The Apollo database serves as a useful reference for both measurements of the natural lunar environment and its modification by lunar base activities.

  12. Microbial community dynamics during start-up operation of flowerpot-using fed-batch reactors for composting of household biowaste.

    PubMed

    Hiraishi, Akira; Narihiro, Takashi; Yamanaka, Yosuke

    2003-09-01

    Microbial community changes during start-up operation of flowerpot-using fed-batch reactors for composting of household biowaste were studied by quinone profiling, rRNA-targeted fluorescence in situ hybridization (FISH) and cultivation methods. Total and plate counts of bacteria and quinone contents in the reactors increased sharply with time during the start-up period. These increase patterns had two phases; the first increase occurred during 3-4 weeks from the start of waste loading and the second increase was found during the subsequent 4 weeks. The microbial biomass was temporally reduced between the two succession phases. Ubiquinones predominated at the beginning of operation but decreased sharply with time, whereas partially saturated menaquinones became predominant at the fully acclimated stage. These data indicated that the major constituents of microbial populations changed from ubiquinone-containing Proteobacteria to Actinobacteria during the period of operation. Neighbour-joining dendrograms constructed based on the quinone profile data suggested that at least one month is required to establish a stable community structure with the Actinobacteria predominating. The characteristic population shift in the start-up process was also demonstrated by FISH probing and 16S rDNA sequence comparisons of bacterial strains isolated.

  13. Assessment of Startup Fuel Options for the GNEP Advanced Burner Reactor (ABR)

    SciTech Connect

    Jon Carmack; Kemal O. Pasamehmetoglu; David Alberstein

    2008-02-01

    The Global Nuclear Energy Program (GNEP) includes a program element for the development and construction of an advanced sodium cooled fast reactor to demonstrate the burning (transmutation) of significant quantities of minor actinides obtained from a separations process and fabricated into a transuranic bearing fuel assembly. To demonstrate and qualify transuranic (TRU) fuel in a fast reactor, an Advanced Burner Reactor (ABR) prototype is needed. The ABR would necessarily be started up using conventional metal alloy or oxide (U or U, Pu) fuel. Startup fuel is needed for the ABR for the first 2 to 4 core loads of fuel in the ABR. Following start up, a series of advanced TRU bearing fuel assemblies will be irradiated in qualification lead test assemblies in the ABR. There are multiple options for this startup fuel. This report provides a description of the possible startup fuel options as well as possible fabrication alternatives available to the program in the current domestic and international facilities and infrastructure.

  14. Strategies for the startup of methanogenic inverse fluidized-bed reactors using colonized particles.

    PubMed

    Alvarado-Lassman, A; Sandoval-Ramos, A; Flores-Altamirano, M G; Vallejo-Cantú, N A; Méndez-Contreras, J M

    2010-05-01

    One of the inconveniences in the startup of methanogenic inverse fluidized-bed reactors (IFBRs) is the long period required for biofilm formation and stabilization of the system. Previous researchers have preferred to start up in batch mode to shorten stabilization times. Much less work has been done with continuous-mode startup for the IFBR configuration of reactors. In this study, we prepared two IFBRs with similar characteristics to compare startup times for batch- and continuous-operation modes. The reactors were inoculated with a small quantity of colonized particles and run for a period of 3 months, to establish the optimal startup strategy using synthetic media as a substrate (glucose as a source of carbon). After the startup stage, the continuous- and batch-mode reactors removed more than 80% of the chemical oxygen demand (COD) in 51 and 60 days of operation, respectively; however, at the end of the experiments, the continuous-mode reactor had more biomass attached to the support media than the batch-mode reactor. Both reactors developed fully covered support media, but only the continuous-mode reactor had methane yields close to the theoretical value that is typical of stable reactors. Then, a combined startup strategy was proposed, with industrial wastewater as the substrate, using a sequence of batch cycles followed by continuous operation, which allows stable operation at an organic loading rate of 20 g COD/L x d in 15 days. Using a fraction of colonized support as an inoculum presents advantages, with respect to previously reported strategies.

  15. Antimicrobial Activity of Carbon-Based Nanoparticles

    PubMed Central

    Maleki Dizaj, Solmaz; Mennati, Afsaneh; Jafari, Samira; Khezri, Khadejeh; Adibkia, Khosro

    2015-01-01

    Due to the vast and inappropriate use of the antibiotics, microorganisms have begun to develop resistance to the commonly used antimicrobial agents. So therefore, development of the new and effective antimicrobial agents seems to be necessary. According to some recent reports, carbon-based nanomaterials such as fullerenes, carbon nanotubes (CNTs) (especially single-walled carbon nanotubes (SWCNTs)) and graphene oxide (GO) nanoparticles show potent antimicrobial properties. In present review, we have briefly summarized the antimicrobial activity of carbon-based nanoparticles together with their mechanism of action. Reviewed literature show that the size of carbon nanoparticles plays an important role in the inactivation of the microorganisms. As major mechanism, direct contact of microorganisms with carbon nanostructures seriously affects their cellular membrane integrity, metabolic processes and morphology. The antimicrobial activity of carbon-based nanostructures may interestingly be investigated in the near future owing to their high surface/volume ratio, large inner volume and other unique chemical and physical properties. In addition, application of functionalized carbon nanomaterials as carriers for the ordinary antibiotics possibly will decrease the associated resistance, enhance their bioavailability and provide their targeted delivery. PMID:25789215

  16. Active Region Segmentation Based on Stokes Asymmetries

    NASA Astrophysics Data System (ADS)

    Choi, Jieun; Harker-Lundberg, B.

    2011-01-01

    During the Stokes inversion process, we would ideally use a distinct model for each structure in an active region which addresses the differences in the physical conditions of these regions. While the Milne-Eddington model of the atmosphere---a frequently-used ideal model that assumes all local thermodynamic equilibrium (LTE) conditions are satisfied---is a sufficient approximation for the description of the solar photosphere, we almost always observe deviations from this model. It is thus of interest to devise a method to systematically and accurately identify the active regions based on their spectra, such that we could use a more sophisticated model catered to each structure in an active region during the actual Stokes inversion process. We present a classification scheme for different active region structures using Stokes asymmetries and line core depths as discriminators. The data used for this investigation were obtained from the Synoptic Optical Long-term Investigations of the Sun (SOLIS) facility using the Vector Spectromagnetograph (VSM), observed in a 3 A bandpass around Fe I 6302.5 A, from March 27, 2008 to March 29, 2008. This work is carried out through the National Solar Observatory Research Experiences for Undergraduate (REU) site program, which is co-funded by the Department of Defense in partnership with the National Science Foundation REU Program. The National Solar Observatory is operated by the Association of Universities for Research in Astronomy, Inc. (AURA) under cooperative agreement with the National Science Foundation.

  17. Human body contour data based activity recognition.

    PubMed

    Myagmarbayar, Nergui; Yuki, Yoshida; Imamoglu, Nevrez; Gonzalez, Jose; Otake, Mihoko; Yu, Wenwei

    2013-01-01

    This research work is aimed to develop autonomous bio-monitoring mobile robots, which are capable of tracking and measuring patients' motions, recognizing the patients' behavior based on observation data, and providing calling for medical personnel in emergency situations in home environment. The robots to be developed will bring about cost-effective, safe and easier at-home rehabilitation to most motor-function impaired patients (MIPs). In our previous research, a full framework was established towards this research goal. In this research, we aimed at improving the human activity recognition by using contour data of the tracked human subject extracted from the depth images as the signal source, instead of the lower limb joint angle data used in the previous research, which are more likely to be affected by the motion of the robot and human subjects. Several geometric parameters, such as, the ratio of height to weight of the tracked human subject, and distance (pixels) between centroid points of upper and lower parts of human body, were calculated from the contour data, and used as the features for the activity recognition. A Hidden Markov Model (HMM) is employed to classify different human activities from the features. Experimental results showed that the human activity recognition could be achieved with a high correct rate.

  18. Active-imaging-based underwater navigation

    NASA Astrophysics Data System (ADS)

    Monnin, David; Schmitt, Gwenaël.; Fischer, Colin; Laurenzis, Martin; Christnacher, Frank

    2015-10-01

    Global navigation satellite systems (GNSS) are widely used for the localization and the navigation of unmanned and remotely operated vehicles (ROV). In contrast to ground or aerial vehicles, GNSS cannot be employed for autonomous underwater vehicles (AUV) without the use of a communication link to the water surface, since satellite signals cannot be received underwater. However, underwater autonomous navigation is still possible using self-localization methods which determines the relative location of an AUV with respect to a reference location using inertial measurement units (IMU), depth sensors and even sometimes radar or sonar imaging. As an alternative or a complementary solution to common underwater reckoning techniques, we present the first results of a feasibility study of an active-imaging-based localization method which uses a range-gated active-imaging system and can yield radiometric and odometric information even in turbid water.

  19. Activity-Based Protein Profiling of Microbes

    SciTech Connect

    Sadler, Natalie C.; Wright, Aaron T.

    2015-02-01

    Activity-Based Protein Profiling (ABPP) in conjunction with multimodal characterization techniques has yielded impactful findings in microbiology, particularly in pathogen, bioenergy, drug discovery, and environmental research. Using small molecule chemical probes that react irreversibly with specific proteins or protein families in complex systems has provided insights in enzyme functions in central metabolic pathways, drug-protein interactions, and regulatory protein redox, for systems ranging from photoautotrophic cyanobacteria to mycobacteria, and combining live cell or cell extract ABPP with proteomics, molecular biology, modeling, and other techniques has greatly expanded our understanding of these systems. New opportunities for application of ABPP to microbial systems include: enhancing protein annotation, characterizing protein activities in myriad environments, and reveal signal transduction and regulatory mechanisms in microbial systems.

  20. An investigation of the side force that is sometimes observed in rocket start-up

    NASA Technical Reports Server (NTRS)

    Bowyer, J. M., Jr.; Kreiter, G. W.; Petersen, R. E.

    1978-01-01

    The occurrence of a large but momentary side force during the start-up of rocket motors employing convergent-divergent nozzles has been noted occasionally. Asymmetric flow separation within the divergent section of the nozzle is proposed as the principal source of this lateral force. A method for estimating this force and its concomitant lateral impulse is outlined, and results obtained by applying the method to Scout vehicle first-, second-, and third-stage rocket motor start-ups are presented and compared with similar estimates that other researchers obtained by a different method.

  1. On Stability of Natural-circulation-cooled Boiling Water Reactors during Start-up (Experimental Results)

    SciTech Connect

    Manera, A.; Van der Hagen, T.H.J.J.

    2002-07-01

    The characteristics of flashing-induced instabilities, which are of importance during the start-up phase of natural-circulation Boiling Water Reactors (BWRs), are studied. Experiments at typical start-up conditions (low power and low pressure) are carried out on a steam/water natural circulation loop. The mechanism of flashing-induced instability is analyzed in detail and it is found that non-equilibrium between phases and enthalpy transport plays an important role in the instability process. Pressure and steam volume in the steam dome are found to have a stabilizing effect. The main characteristics of the instabilities have been analyzed. (authors)

  2. Cover and startup gas supply system for solid oxide fuel cell generator

    DOEpatents

    Singh, Prabhakar; George, Raymond A.

    1999-01-01

    A cover and startup gas supply system for a solid oxide fuel cell power generator is disclosed. Hydrocarbon fuel, such as natural gas or diesel fuel, and oxygen-containing gas are supplied to a burner. Combustion gas exiting the burner is cooled prior to delivery to the solid oxide fuel cell. The system mixes the combusted hydrocarbon fuel constituents with hydrogen which is preferably stored in solid form to obtain a non-explosive gas mixture. The system may be used to provide both non-explosive cover gas and hydrogen-rich startup gas to the fuel cell.

  3. Cover and startup gas supply system for solid oxide fuel cell generator

    DOEpatents

    Singh, P.; George, R.A.

    1999-07-27

    A cover and startup gas supply system for a solid oxide fuel cell power generator is disclosed. Hydrocarbon fuel, such as natural gas or diesel fuel, and oxygen-containing gas are supplied to a burner. Combustion gas exiting the burner is cooled prior to delivery to the solid oxide fuel cell. The system mixes the combusted hydrocarbon fuel constituents with hydrogen which is preferably stored in solid form to obtain a non-explosive gas mixture. The system may be used to provide both non-explosive cover gas and hydrogen-rich startup gas to the fuel cell. 4 figs.

  4. Fast start-up reactor for partial oxidation of methane with electrically-heated metallic monolith catalyst

    NASA Astrophysics Data System (ADS)

    Jung, Heon; Yoon, Wang Lai; Lee, Hotae; Park, Jong Soo; Shin, Jang Sik; La, Howon; Lee, Jong Dae

    A palladium-washcoated metallic monolith catalyst is applied to the partial oxidation of methane to syngas. This catalyst is highly active at a gas hourly space velocity (GHSV) of 100,000 h -1. The compact partial oxidation (POX) reactor equipped with both 96 cc of the metallic monolith catalyst and an electrically-heated catalyst (EHC) has a start-up time of less than 1.5 min and a syngas generation capacity of 9.5 Nm 3 h -1. The POX reaction is sustained without the need for an external heater. With the stand-alone POX reactor, the methane conversion can be increased either by preheating the reactant mixture heat-exchanged with the product gas, or by supplying a larger amount of oxygen than is necessary for the reaction stoichiometry.

  5. 40 CFR 60.4860 - Do the emission limits, emission standards, and operating limits apply during periods of startup...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 6 2011-07-01 2011-07-01 false Do the emission limits, emission standards, and operating limits apply during periods of startup, shutdown, and malfunction? 60.4860 Section... emission limits, emission standards, and operating limits apply during periods of startup, shutdown,...

  6. Time-driven activity-based costing.

    PubMed

    Kaplan, Robert S; Anderson, Steven R

    2004-11-01

    In the classroom, activity-based costing (ABC) looks like a great way to manage a company's limited resources. But executives who have tried to implement ABC in their organizations on any significant scale have often abandoned the attempt in the face of rising costs and employee irritation. They should try again, because a new approach sidesteps the difficulties associated with large-scale ABC implementation. In the revised model, managers estimate the resource demands imposed by each transaction, product, or customer, rather than relying on time-consuming and costly employee surveys. This method is simpler since it requires, for each group of resources, estimates of only two parameters: how much it costs per time unit to supply resources to the business's activities (the total overhead expenditure of a department divided by the total number of minutes of employee time available) and how much time it takes to carry out one unit of each kind of activity (as estimated or observed by the manager). This approach also overcomes a serious technical problem associated with employee surveys: the fact that, when asked to estimate time spent on activities, employees invariably report percentages that add up to 100. Under the new system, managers take into account time that is idle or unused. Armed with the data, managers then construct time equations, a new feature that enables the model to reflect the complexity of real-world operations by showing how specific order, customer, and activity characteristics cause processing times to vary. This Tool Kit uses concrete examples to demonstrate how managers can obtain meaningful cost and profitability information, quickly and inexpensively. Rather than endlessly updating and maintaining ABC data,they can now spend their time addressing the deficiencies the model reveals: inefficient processes, unprofitable products and customers, and excess capacity.

  7. Transient three-dimensional startup side load analysis of a regeneratively cooled nozzle

    NASA Astrophysics Data System (ADS)

    Wang, Ten-See

    2009-07-01

    The objective of this effort is to develop a computational methodology to capture the side load physics and to anchor the computed aerodynamic side loads with the available data by simulating the startup transient of a regeneratively cooled, high-aspect-ratio nozzle, hot-fired at sea level. The computational methodology is based on an unstructured-grid, pressure-based, reacting flow computational fluid dynamics and heat transfer formulation, and a transient inlet history based on an engine system simulation. Emphases were put on the effects of regenerative cooling on shock formation inside the nozzle, and ramp rate on side load reduction. The results show that three types of asymmetric shock physics incur strong side loads: the generation of combustion wave, shock transitions, and shock pulsations across the nozzle lip, albeit the combustion wave can be avoided with sparklers during hot-firing. Results from both regenerative cooled and adiabatic wall boundary conditions capture the early shock transitions with corresponding side loads matching the measured secondary side load. It is theorized that the first transition from free-shock separation to restricted-shock separation is caused by the Coanda effect. After which the regeneratively cooled wall enhances the Coanda effect such that the supersonic jet stays attached, while the hot adiabatic wall fights off the Coanda effect, and the supersonic jet becomes detached most of the time. As a result, the computed peak side load and dominant frequency due to shock pulsation across the nozzle lip associated with the regeneratively cooled wall boundary condition match those of the test, while those associated with the adiabatic wall boundary condition are much too low. Moreover, shorter ramp time results show that higher ramp rate has the potential in reducing the nozzle side loads.

  8. Construction and start-up of a 250 kW natural gas fueled MCFC demonstration power plant

    SciTech Connect

    Figueroa, R.A.; Carter, J.; Rivera, R.; Otahal, J.

    1996-12-31

    San Diego Gas & Electric (SDG&E) is participating with M-C Power in the development and commercialization program of their internally manifolded heat exchanger (IMHEX{reg_sign}) carbonate fuel cell technology. Development of the IMHEX technology base on the UNOCAL test facility resulted in the demonstration of a 250 kW thermally integrated power plant located at the Naval Air Station at Miramar, California. The members of the commercialization team lead by M-C Power (MCP) include Bechtel Corporation, Stewart & Stevenson Services, Inc., and Ishikawajima-Harima Heavy Industries (IHI). MCP produced the fuel cell stack, Bechtel was responsible for the process engineering including the control system, Stewart & Stevenson was responsible for packaging the process equipment in a skid (pumps, desulfurizer, gas heater, turbo, heat exchanger and stem generator), IHI produced a compact flat plate catalytic reformer operating on natural gas, and SDG&E assumed responsibility for plant construction, start-up and operation of the plant.

  9. 40 CFR 60.2195 - What information must I submit prior to initial startup?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Performance for Commercial and Industrial Solid Waste Incineration Units for Which Construction Is Commenced... must submit the information specified in paragraphs (a) through (e) of this section prior to initial startup. (a) The type(s) of waste to be burned. (b) The maximum design waste burning capacity. (c)...

  10. 40 CFR 65.6 - Startup, shutdown, and malfunction plan and procedures.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 16 2014-07-01 2014-07-01 false Startup, shutdown, and malfunction plan and procedures. 65.6 Section 65.6 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CONSOLIDATED FEDERAL AIR RULE General Provisions § 65.6...

  11. Influence of the startup instant of quench in a superconducting current limiter

    SciTech Connect

    Leveque, J.; Netter, D.; Rezzoug, A.; Caron, J.P.; Sargos, F.M.

    1996-09-01

    The influence of the startup instant of the quench in a superconducting current limiter is studied. The heat transfer equation is numerically solved, using finite difference method, and taking the effects of current sharing into account. The results show the importance of this instant on the dissipated power, the temperature-increase and on the efficiency of the current limitation.

  12. 40 CFR 63.310 - Requirements for startups, shutdowns, and malfunctions.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... CATEGORIES National Emission Standards for Coke Oven Batteries § 63.310 Requirements for startups, shutdowns... or operator shall operate and maintain the coke oven battery and its pollution control equipment... operator of a coke oven battery shall develop, according to paragraph (c) of this section, a...

  13. 40 CFR 63.310 - Requirements for startups, shutdowns, and malfunctions.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... CATEGORIES National Emission Standards for Coke Oven Batteries § 63.310 Requirements for startups, shutdowns... or operator shall operate and maintain the coke oven battery and its pollution control equipment... operator of a coke oven battery shall develop, according to paragraph (c) of this section, a...

  14. 40 CFR 63.310 - Requirements for startups, shutdowns, and malfunctions.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... CATEGORIES National Emission Standards for Coke Oven Batteries § 63.310 Requirements for startups, shutdowns... or operator shall operate and maintain the coke oven battery and its pollution control equipment... operator of a coke oven battery shall develop, according to paragraph (c) of this section, a...

  15. Entrepreneurship Education: Enhancing or Discouraging Graduate Start-Up at the University of Pretoria

    ERIC Educational Resources Information Center

    Botha, Melodi; Ras, Rochelle

    2016-01-01

    In-depth interviews were conducted with a sample of BCom Entrepreneurship graduates, as well as a control group to determine whether the exposure to entrepreneurship education can enhance actual business start-up. Information was collected on how they experienced the learning approaches, and the value which they had derived from the degree. This…

  16. International Meeting on Business Start-up (Lille, France, November 26-28, 1992).

    ERIC Educational Resources Information Center

    Melis, Africa, Ed.; Peigne, Florence, Ed.

    1992-01-01

    An international meeting explored work on business start-up undertaken jointly by CEDEFOP (European Centre for the Development of Vocational Training) and France's Agence Nationale pour la creation d'entreprise. One opening presentation (Melis) addressed the basic idea underlying the research: to identify and highlight the role of training and…

  17. Public Data Set: Impedance of an Intense Plasma-Cathode Electron Source for Tokamak Plasma Startup

    SciTech Connect

    Hinson, Edward T.; Barr, Jayson L.; Bongard, Michael W.; Burke, Marcus G.; Fonck, Raymond J.; Perry, Justin M.

    2016-05-31

    This data set contains openly-documented, machine readable digital research data corresponding to figures published in E.T. Hinson et al., 'Impedance of an Intense Plasma-Cathode Electron Source for Tokamak Plasma Startup,' Physics of Plasmas 23, 052515 (2016).

  18. Human Resource Blueprints in Irish High-Tech Start-Up Firms

    ERIC Educational Resources Information Center

    Keating, Mary A.; Olivares, Mariabrisa

    2006-01-01

    Focusing on Irish high-tech start-ups, this paper reports on the results of an empirical study of organization building by entrepreneurial firms, specifically in relation to human resource practices. The research findings are benchmarked with findings from SPEC, the Stanford Project of Emerging Companies (Baron and Hannan, 2002). Human resources…

  19. Barriers to Start-Up and Their Effect on Aspirant Entrepreneurs

    ERIC Educational Resources Information Center

    Robertson, Martyn; Collins, Amanda; Medeira, Natasha; Slater, James

    2003-01-01

    The importance of new business start-ups cannot be over-emphasised. The UK government has taken actions designed to stimulate the growth of new businesses and aid their survival. The identification of barriers to entry is important, together with strategies to minimise their impact. The UK continues to lag behind the USA in its levels of…

  20. 77 FR 72294 - Reconsideration of Certain New Source and Startup/Shutdown Issues: National Emission Standards...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-12-05

    ... From the Federal Register Online via the Government Publishing Office ENVIRONMENTAL PROTECTION AGENCY 40 CFR Parts 60 and 63 RIN 2060-AR62 Reconsideration of Certain New Source and Startup/Shutdown Issues: National Emission Standards for Hazardous Air Pollutants From Coal- and Oil-Fired...

  1. The Perfect Pairing: The Adult Learner and the Boutique Winery in the Start-Up Phase

    ERIC Educational Resources Information Center

    Heath-Simpson, Delta F.

    2011-01-01

    The purpose of this phenomenological study was to understand and describe the lived experiences of adult learners who are owners and managers of small winery businesses operating in the start-up phase of the organizational life cycle. The study explored and identified the meaning of adult learning in the entrepreneurial context and its affect on…

  2. Ed Tech Developer's Guide: A Primer for Software Developers, Startups, and Entrepreneurs

    ERIC Educational Resources Information Center

    Bienkowski, Marie; Gerard, Sarah Nixon; Rubin, Shawn; Sanford, Cathy; Borrelli-Murray, Dana; Driscoll, Tom; Arora, Jessie; Hruska, Mike; Beck, Katie; Murray, Thomas; Hoekstra, Jason; Gannes, Stuart; Metz, Edward; Midgley, Steve; Castilla, Stephanie; Tomassini, Jason; Madda, Mary Jo; Chase, Zac; Martin, Erik; Noel, Marcus; Styles, Kathleen

    2015-01-01

    Opportunities abound for software designers and developers to create impactful tools for teachers, school leaders, students, and their families. This guide for developers, startups, and entrepreneurs addresses key questions about the education ecosystem and highlights critical needs and opportunities to develop digital tools and apps for learning.…

  3. Experimental Labs for Start-Ups: The Role of the "Venture-Sitter"

    ERIC Educational Resources Information Center

    Matricano, Diego; Pietrobon, Alberto

    2010-01-01

    Curley and Formica's (2008, 2010) studies of high-expectation entrepreneurship focus on the role of "experimental laboratories" in promoting the start-up and successful development of high-expectation firms. Although it is not difficult to understand the potential usefulness of these experimental labs--business simulators in which skilled partners…

  4. What's New in the Launching of Start-Ups? Features and Implications of Laboratory Experiments

    ERIC Educational Resources Information Center

    Matricano, Diego

    2009-01-01

    This article responds to "Laboratory experiments as a tool in the empirical economic analysis of high-expectation start-ups" by Martin Curley and Piero Formica, published in the December 2008 issue of "Industry and Higher Education." The exploitation of knowledge and experience is increasingly important to companies operating in the globalized…

  5. Graduate Career-Making and Business Start-Up: A Literature Review

    ERIC Educational Resources Information Center

    Nabi, Ghulam; Holden, Rick; Walmsley, Andreas

    2006-01-01

    Purpose: The purpose of this article is to provide a selective review of literature on the career-related decision-making processes in terms of the transition from student to business start-up, and the nature and influence of support and guidance. Design/methodology/approach: Primarily, a critical review of a range of recently published literature…

  6. First LNG from North field overcomes feed, start-up problems

    SciTech Connect

    Redha, A.; Rahman, A.; Al-Thani, N.H.; Ishikura, Masayuki; Kikkawa, Yoshitsugi

    1998-08-24

    Qatar Gas LNG is the first LNG project in the gas-development program of the world`s largest gas reservoir, North field. The LNG plant was completed within the budget and schedule. The paper discusses the LNG plant design, LNG storage and loading, alternative mercaptan removal, layout modification, information and control systems, training, data management systems, start-up, and performance testing.

  7. 40 CFR 63.310 - Requirements for startups, shutdowns, and malfunctions.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... plan, the owner or operator may use the standard operating procedures manual for the battery, provided... CATEGORIES National Emission Standards for Coke Oven Batteries § 63.310 Requirements for startups, shutdowns... or operator shall operate and maintain the coke oven battery and its pollution control...

  8. 40 CFR 63.310 - Requirements for startups, shutdowns, and malfunctions.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... plan, the owner or operator may use the standard operating procedures manual for the battery, provided... CATEGORIES National Emission Standards for Coke Oven Batteries § 63.310 Requirements for startups, shutdowns... or operator shall operate and maintain the coke oven battery and its pollution control...

  9. THE MURMANSK INITIATIVE - RF: COMPLETING CONSTRUCTION AND START-UP TESTING

    SciTech Connect

    CZAJKOWSKI,C.; BOWERMAN,B.S.; DYER,R.S.; SORLIE,A.A.; WESTER,D.

    1998-03-01

    The Murmansk Initiative - RF was instigated to address Russia's ability to meet the London Convention prohibiting ocean dumping of radioactive waste. The Initiative, under a trilateral agreement, will upgrade an existing low-level liquid radioactive waste treatment facility, increasing capacity from 1,200 m{sup 3}/year to 5,000 m{sup 3}/year, and expand the capability to treat liquids containing salt (up to 10 g/L). The three parties to the agreement, the Russian Federation, Norway, and the US, have split the costs for the project. All construction has been provided by Russia. Construction of mechanical systems (piping and valves, pumps, sorbent columns, settling tanks, surge tanks) is nearly complete, with instrumentation and control (I+C) systems the last to be installed. Delays to the I+C installation have occurred because changes in system specifications required some additional US-supplied computer control equipment to be purchased, and clearance through customs (both US and Russian) has been slow. Start-up testing has been limited to testing of some isolated sub-systems because of the delays in I+C installation. Final construction activities are also hampered by the current state of the Russian economy. The specific impact has been completion of the cementation unit, which was not funded under the trilateral agreement (but funded by the Russian government). Russian regulatory authorities have stated that final licensing for expanded capacity (5,000 m{sup 3}/year) will not be given until the cementation unit is on-line.

  10. Start-up fuel and power flattening of sodium-cooled candle core

    SciTech Connect

    Takaki, Naoyuki; Sagawa, Yu; Umino, Akitake; Sekimoto, Hiroshi

    2013-07-01

    The hard neutron spectrum and unique power shape of CANDLE enable its distinctive performances such as achieving high burnup more than 30% and exempting necessity of both enrichment and reprocessing. On the other hand, they also cause several challenging problems. One is how the initial fuel can be prepared to start up the first CANDLE reactor because the equilibrium fuel composition that enables stable CANDLE burning is complex both in axial and radial directions. Another prominent problem is high radial power peaking factor that worsens averaged burnup, namely resource utilization factor in once-through mode and shorten the life time of structure materials. The purposes of this study are to solve these two problems. Several ideas for core configurations and startup fuel using single enrichment uranium and iron as a substitute of fission products are studied. As a result, it is found that low enriched uranium is applicable to ignite the core but all concepts examined here exceeded heat limits. Adjustment in enrichment and height of active and burnt zone is opened for future work. Sodium duct assemblies and thorium fuel assemblies loaded in the center region are studied as measures to reduce radial power peaking factor. Replacing 37 fuels by thorium fuel assemblies in the zeroth to third row provides well-balanced performance with flattened radial power distribution. The CANDLE core loaded with natural uranium in the outer and thorium in the center region achieved 35.6% of averaged burnup and 7.0 years of cladding life time owing to mitigated local fast neutron irradiation at the center. Using thorium with natural or depleted uranium in CANDLE reactor is also beneficial to diversifying fission resource and extending available term of fission energy without expansion of needs for enrichment and reprocessing.

  11. 42 CFR 137.302 - Are Federal funds available to cover start-up costs associated with initial Tribal assumption of...

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 1 2011-10-01 2011-10-01 false Are Federal funds available to cover start-up costs... funds available to cover start-up costs associated with initial Tribal assumption of environmental responsibilities? (a) Yes, start-up costs are available as provided in section 508(c) of the Act . During...

  12. Start-Up Entrepreneurs and University Students in a Co-Learning Mode: Learning Effects of a Collaborative Entrepreneurial Coaching Programme

    ERIC Educational Resources Information Center

    Saukkonen, Juha; Nukari, Jussi; Ballard, Sharon; Levie, Jonathan

    2016-01-01

    Start-up companies have been recognized as key drivers of wealth and job creation. Many students now in universities will therefore find their future employment in start-up companies, or will found them. Success in the start-up environment requires a specific set of skills. There is a growing supply of university education for new venture creation…

  13. Mathematical modeling of the evolution of thermal field during start-up phase of the direct chill casting process for AA5182 sheet ingots

    NASA Astrophysics Data System (ADS)

    Sengupta, Joydeep

    The control of the thermal cooling conditions at the start-up phase of the Direct Chill (DC) casting process for aluminum sheet ingots is difficult, and is critical from the standpoint of defect formation. Firstly, boiling water heat transfer governs the secondary cooling experienced by the ingot surfaces as they emerge from the mould. This results in varying rates of heat transfer from the ingot faces as the surface temperature of the ingot changes with time during the start-up phase. Moreover, if the ingot surface temperature at locations below the point of water impingement is high enough to promote film boiling, the water is ejected away from the surface. This can result in a sudden decrease in heat transfer and the formation of local hot spots. Also, the chill water may enter into the gap formed between the ingot base and the bottom block with the evolution of the butt curl. This process of water incursion alters the heat transfer from the base of the ingot, and in turn affects the surface temperature of the ingot faces. A comprehensive mathematical model has been developed to describe heat transfer during the start-up phase of the D.C. casting process. The model, based on the commercial finite element package ABAQUS, includes primary cooling to the mould, secondary cooling to water, and ingot base cooling. The algorithm used to account for secondary cooling to the water includes boiling curves that are a function of surface temperature, water flow rate, impingement point temperature, and position relative to the point of water impingement. In addition, the secondary cooling algorithm accounts for water ejection, which can occur at low water flow rates (low heat extraction rates). The algorithm used to describe ingot base cooling includes the drop in contact heat transfer due to base deformation (butt curl), and also the increase in heat transfer due to the process of water incursion between the ingot base and bottom block. The model has been extensively

  14. Reactor Start-up and Control Methodologies: Consideration of the Space Radiation Environment

    NASA Astrophysics Data System (ADS)

    Bragg-Sitton, Shannon M.; Holloway, James Paul

    2004-02-01

    The use of fission energy in space power and propulsion systems offers considerable advantages over chemical propulsion. Fission provides over six orders of magnitude higher energy density, which translates to higher vehicle specific impulse and lower specific mass. These characteristics enable the accomplishment of ambitious space exploration missions. The natural radiation environment in space provides an external source of protons and high energy, high Z particles that can result in the production of secondary neutrons through interactions in reactor structures. Initial investigation using MCNPX 2.5.b for proton transport through the SAFE-400 reactor indicates a secondary neutron net current of 1.4×107 n/s at the core-reflector interface, with an incoming current of 3.4×106 n/s due to neutrons produced in the Be reflector alone. This neutron population could provide a reliable startup source for a space reactor. Additionally, this source must be considered in developing a reliable control strategy during reactor startup, steady-state operation, and power transients. An autonomous control system is developed and analyzed for application during reactor startup, accounting for fluctuations in the radiation environment that result from changes in vehicle location (altitude, latitude, position in solar system) or due to temporal variations in the radiation field, as may occur in the case of solar flares. One proposed application of a nuclear electric propulsion vehicle is in a tour of the Jovian system, where the time required for communication to Earth is significant. Hence, it is important that a reactor control system be designed with feedback mechanisms to automatically adjust to changes in reactor temperatures, power levels, etc., maintaining nominal operation without user intervention. This paper will evaluate the potential use of secondary neutrons produced by proton interactions in the reactor vessel as a startup source for a space reactor and will present

  15. Start-up of the PCI Facility at Stelco Hilton Works

    SciTech Connect

    Hyde, J.B.; Hutchinson, S.; Brown, R.

    1996-12-31

    In the late 1980`s it became apparent that the future coke requirements for the two Blast Furnaces at Stelco`s Hilton Works would be greater than the projected internal coke production levels. The three older coke batteries had been producing for forty years and were expected to be shutdown by the mid 1990`s due to age and environmental considerations. Although the purchase of coke from external sources to supplement needs was accepted as a short term solution, it was not considered a viable long term strategy. Decreasing world coke production forecasted increasing coke purchase costs and availability constraints. Construction of a new coke battery represented a large capital investment, high operating costs, and new environmental implications. Early studies suggested pulverized coal injection was the most viable solution to the coke shortfall problem. PCI rates had advanced significantly during the 1980`s and the process continued to be a leading edge technology entering the 1990`s. To return Hilton Works to a near self sufficient coke state, a team was formed whose efforts were directed towards investigating the available PCI technologies, selecting a process which was most suitable, and arranging acceptable financing. The facility design was to be based on Kawasaki technology. Construction of the facility and injection lines to the Blast Furnaces occurred over 13 months. On Dec. 18, 1995, injection began to E Blast Furnace followed by injection to D Blast Furnace on January 16, 1996. This paper will provide a description of Hilton Works` Blast Furnaces and the PCI Facility. The start-up and current status of PCI will also be examined.

  16. Magnesium Based Materials and their Antimicrobial Activity

    NASA Astrophysics Data System (ADS)

    Robinson, Duane Allan

    The overall goals of this body of work were to characterize the antimicrobial properties of magnesium (Mg) metal and nano-magnesium oxide (nMgO) in vitro, to evaluate the in vitro cytotoxicity of Mg metal, and to incorporate MgO nanoparticles into a polymeric implant coating and evaluate its in vitro antimicrobial properties. In the course of this work it was found that Mg metal, Mg-mesh, and nMgO have in vitro antimicrobial properties that are similar to a bactericidal antibiotic. For Mg metal, the mechanism of this activity appears to be related to an increase in pH (i.e. a more alkaline environment) and not an increase in Mg2+. Given that Mg-mesh is a Mg metal powder, the assumption is that it has the same mechanism of activity as Mg metal. The mechanism of activity for nMgO remains to be elucidated and may be related to a combination of interaction of the nanoparticles with the bacteria and the alkaline pH. It was further demonstrated that supernatants from suspensions of Mg-mesh and nMgO had the same antimicrobial effect as was noted when the particles were used. The supernatant from Mg-mesh and nMgO was also noted to prevent biofilm formation for two Staphylococcus strains. Finally, poly-epsilon-caprolactone (PCL) composites of Mg-mesh (PCL+Mg-mesh) and nMgO (PCL+nMgO) were produced. Coatings applied to screws inhibited growth of Escherichia coli and Pseudomonas aeruginosa and in thin disc format inhibited the growth of Staphylococcus aureus in addition to the E. coli and P. aeruginosa. Pure Mg metal was noted to have some cytotoxic effect on murine fibroblast and osteoblast cell lines, although this effect needs to be characterized further. To address the need for an in vivo model for evaluating implant associated infections, a new closed fracture osteomyelitis model in the femur of the rat was developed. Magnesium, a readily available and inexpensive metal was shown to have antimicrobial properties that appear to be related to its corrosion products and

  17. Startup of the New 200 West Pump-and-Treat, Hanford Site, Richland, Washington - 13214

    SciTech Connect

    Byrnes, Mark E.; Simmons, Sally; Morse, John

    2013-07-01

    resin (which has been proven effective in removing Tc-99). The water is then transferred to the biological treatment building for further treatment. When the lead vessel in each of the two treatment trains becomes fully loaded with Tc-99, the Purolite A530E resin is transferred to a separate tank where it is heated to 160 deg. F to remove volatile organics prior to disposal at the Environmental Restoration Disposal Facility. The biological treatment building has a maximum flow capacity of 2,500 gpm. Groundwater from the nonradiological extraction wells and treated groundwater from the RAD building are initially pumped into an equalization tank and then into two parallel fluidized bed reactors (FBRs). The FBRs contain granulated activated carbon in suspension for microbes to populate, a carbon-based food source for the microbes to eat (e.g., MicroCg{sup TM}, molasses, or sodium lactate), and nitrate for the microbes to breathe (represents 'anoxic' conditions that contain little or no dissolved oxygen). The FBRs are maintained at a temperature between 55 deg. F and 90 deg. F, and at a pH between 6.5 and 6.8, to maximize microbial growth. The FBRs break down the nitrate, reduce the hexavalent chromium to trivalent chromium, and break down a good portion of the carbon tetrachloride and TCE. From the FBRs, groundwater is pumped through a carbon separation tank, then through a splitter box that divides the water evenly between four membrane bioreactors (MBRs) that further break down the contaminants. The MBRs have aeration capacity to provide sufficient oxygen for maintaining the aerobic biological process. The MBRs use submerged membranes for filtration. Vertically strung fibers are found in the membrane zone where a vacuum draws water through tiny pores in the fibers. The liquid is then pumped to air strippers to remove any volatile organics that have passed through the bioreactors. Solids from the MBRs are pumped to rotary drum thickeners and centrifuges for dewatering

  18. Hands-On Science: Science Start-ups.

    ERIC Educational Resources Information Center

    Kepler, Lynne

    1992-01-01

    Article discusses the four elements of good elementary science programs and offers ideas for creative hands-on science and across-the-curriculum activities (e.g., a please touch science center, curriculum planning chart, and getting to know you water activity). It notes science-related events and describes four science reference books. (SM)

  19. Digital computer study of nuclear reactor thermal transients during startup of 60-kWe Brayton power conversion system

    NASA Technical Reports Server (NTRS)

    Jefferies, K. S.; Tew, R. C.

    1974-01-01

    A digital computer study was made of reactor thermal transients during startup of the Brayton power conversion loop of a 60-kWe reactor Brayton power system. A startup procedure requiring the least Brayton system complication was tried first; this procedure caused violations of design limits on key reactor variables. Several modifications of this procedure were then found which caused no design limit violations. These modifications involved: (1) using a slower rate of increase in gas flow; (2) increasing the initial reactor power level to make the reactor respond faster; and (3) appropriate reactor control drum manipulation during the startup transient.

  20. Active Learning-Based Pedagogical Rule Extraction.

    PubMed

    Junqué de Fortuny, Enric; Martens, David

    2015-11-01

    Many of the state-of-the-art data mining techniques introduce nonlinearities in their models to cope with complex data relationships effectively. Although such techniques are consistently included among the top classification techniques in terms of predictive power, their lack of transparency renders them useless in any domain where comprehensibility is of importance. Rule-extraction algorithms remedy this by distilling comprehensible rule sets from complex models that explain how the classifications are made. This paper considers a new rule extraction technique, based on active learning. The technique generates artificial data points around training data with low confidence in the output score, after which these are labeled by the black-box model. The main novelty of the proposed method is that it uses a pedagogical approach without making any architectural assumptions of the underlying model. It can therefore be applied to any black-box technique. Furthermore, it can generate any rule format, depending on the chosen underlying rule induction technique. In a large-scale empirical study, we demonstrate the validity of our technique to extract trees and rules from artificial neural networks, support vector machines, and random forests, on 25 data sets of varying size and dimensionality. Our results show that not only do the generated rules explain the black-box models well (thereby facilitating the acceptance of such models), the proposed algorithm also performs significantly better than traditional rule induction techniques in terms of accuracy as well as fidelity.

  1. Performance Based Education. Technology Activity Modules.

    ERIC Educational Resources Information Center

    Custer, Rodney L., Ed.

    These Technology Activity Modules are designed to serve as an implementation resource for technology education teachers as they integrate technology education with Missouri's Academic Performance Standards and provide a source of activities and activity ideas that can be used to integrate and reinforce learning across the curriculum. The modules…

  2. Transient Three-Dimensional Startup Side Load Analysis of a Regeneratively Cooled Nozzle

    NASA Technical Reports Server (NTRS)

    Wang, Ten-See

    2008-01-01

    The objective of this effort is to develop a computational methodology to capture the startup side load physics and to anchor the computed aerodynamic side loads with the available data from a regeneratively cooled, high-aspect-ratio nozzle, hot-fired at sea level. The computational methodology is based on an unstructured-grid, pressure-based, reacting flow computational fluid dynamics and heat transfer formulation, a transient 5 s inlet history based on an engine system simulation, and a wall temperature distribution to reflect the effect of regenerative cooling. To understand the effect of regenerative wall cooling, two transient computations were performed using the boundary conditions of adiabatic and cooled walls, respectively. The results show that three types of shock evolution are responsible for side loads: generation of combustion wave; transitions among free-shock separation, restricted-shock separation, and simultaneous free-shock and restricted shock separations; along with the pulsation of shocks across the lip, although the combustion wave is commonly eliminated with the sparklers during actual test. The test measured two side load events: a secondary and lower side load, followed by a primary and peak side load. Results from both wall boundary conditions captured the free-shock separation to restricted-shock separation transition with computed side loads matching the measured secondary side load. For the primary side load, the cooled wall transient produced restricted-shock pulsation across the nozzle lip with peak side load matching that of the test, while the adiabatic wall transient captured shock transitions and free-shock pulsation across the lip with computed peak side load 50% lower than that of the measurement. The computed dominant pulsation frequency of the cooled wall nozzle agrees with that of a separate test, while that of the adiabatic wall nozzle is more than 50% lower than that of the measurement. The computed teepee-like formation

  3. Creating Stimulating Learning and Thinking Using New Models of Activity-Based Learning and Metacognitive-Based Activities

    ERIC Educational Resources Information Center

    Pang, Katherine

    2010-01-01

    The purpose of this paper is to present a novel way to stimulate learning, creativity, and thinking based on a new understanding of activity-based learning (ABL) and two methods for developing metacognitive-based activities for the classroom. ABL, in this model, is based on the premise that teachers are distillers and facilitators of information…

  4. Shot noise startup of the 6 NM SASE FEL at the Tesla Test Facility

    SciTech Connect

    Pierini, P.; Fawley, W.M.

    1995-12-31

    We present here an analysis of the shot noise startup of the 6 nm SASE FEI proposal at the TESLA Test Facility in DESY The statistical of the saturation length and output power due to the intrinsic randomness of the noise startup are investigated with the use of the 2D time dependent code GINGER, that takes into account propagation effects and models shot noise. We then provide estimates for the spectral contents and linewidth of the emitted radiation and describe its spiking characteristics. The output radiation will develop superradiant spikes seeded by the shot noise in the electron beam, which can entrance the average emitted power at the expense of some spectral broadening.

  5. Solid oxide fuel cell power plant having a bootstrap start-up system

    SciTech Connect

    Lines, Michael T

    2016-10-04

    The bootstrap start-up system (42) achieves an efficient start-up of the power plant (10) that minimizes formation of soot within a reformed hydrogen rich fuel. A burner (48) receives un-reformed fuel directly from the fuel supply (30) and combusts the fuel to heat cathode air which then heats an electrolyte (24) within the fuel cell (12). A dilute hydrogen forming gas (68) cycles through a sealed heat-cycling loop (66) to transfer heat and generated steam from an anode side (32) of the electrolyte (24) through fuel processing system (36) components (38, 40) and back to an anode flow field (26) until fuel processing system components (38, 40) achieve predetermined optimal temperatures and steam content. Then, the heat-cycling loop (66) is unsealed and the un-reformed fuel is admitted into the fuel processing system (36) and anode flow (26) field to commence ordinary operation of the power plant (10).

  6. Modeling Tokamak Discharges during Startup in DIII-D and Predictions for ITER

    NASA Astrophysics Data System (ADS)

    Budny, R. V.; Andre, R.; Kessel, C. E.; McCune, D.; Jackson, G. L.; Humphreys, D. A.; Luce, T. C.; Politzer, P. A.

    2009-11-01

    The PTRANSP code is being developed for improving predictions of ITER and future Tokamaks [1]. Important goals are predicting plasma performance as well as safe and efficient startup and termination. PTRANSP is being tested on experiments in DIII-D to explore and optimize plasma startup and termination, and to benchmark of transport. An important aspect is to model the boundary accurately since parameters such as the flux consumption and induction li can vary sensitively on the boundary shape. PTRANSP is being modified to allow for direct input of the flux in R, Z space (from EFIT) instead of using Fourier moments of the boundary. PTRANSP will write quantities such as the inductance and surface voltage at the separatrix surface as well as the flux boundary usually used in TRANSP. The predictive capabilities are being improved also. These include models for predicting temperatures, densities, and toroidal momentum. Predictions for ITER will be discussed. [1] R.V. Budny, Nuclear Fusion 49 (2009) 085008.

  7. Methanogenic population dynamics during start-up of anaerobic digesters treating municipal solid waste and biosolids

    SciTech Connect

    Griffin, M.E.; McMahon, K.D.; Mackie, R.I.; Raskin, L.

    1998-02-05

    An aggressive start-up strategy was used to initiate codigestion in two anaerobic, continuously mixed bench-top reactors at mesophilic (37 C) and thermophilic (55 C) conditions. The digesters were inoculated with mesophilic anaerobic sewage sludge and cattle manure and were fed a mixture of simulated municipal solid waste and biosolids in proportions that reflect US production rates. The design organic loading rate was 3.1 kg volatile solids/m{sup 3}/day and the retention time was 20 days. Ribosomal RNA-targeted oligonucleotide probes were used to determine the methanogenic community structure in the inocula and the digesters. Chemical analyses were performed to evaluate digester performance. The aggressive start-up strategy was successful for the thermophilic reactor, despite the use of a mesophilic inoculum.

  8. Transient thermal-mechanical coupling behavior analysis of mechanical seals during start-up operation

    NASA Astrophysics Data System (ADS)

    Gao, B. C.; Meng, X. K.; Shen, M. X.; Peng, X. D.

    2016-05-01

    A transient thermal-mechanical coupling model for a contacting mechanical seal during start-up has been developed. It takes into consideration the coupling relationship among thermal-mechanical deformation, film thickness, temperature and heat generation. The finite element method and multi-iteration technology are applied to solve the temperature distribution and thermal-mechanical deformation as well as their evolution behavior. Results show that the seal gap transforms from negative coning to positive coning and the contact area of the mechanical seal gradually decreases during start-up. The location of the maximum temperature and maximum contact pressure move from the outer diameter to inside diameter. The heat generation and the friction torque increase sharply at first and then decrease. Meanwhile, the contact force decreases and the fluid film force and leakage rate increase.

  9. Lessons learned from start-up testing of a mixed waste incinerator

    SciTech Connect

    Holmes Burns, H.; Burns, D.B.

    1997-05-01

    Start-up testing of a new mixed waste incinerator, the Consolidated Incineration Facility (CIF), has been completed at the Department of Energy`s Savannah River Site (SRS). The incinerator is equipped with an air pollution control system (APCS) that includes a wet quench and scrubber followed by dry air filtration using high efficiency particulate air (HEPA) filters. The system was designed with optimum materials to maximize reliability, runtime, and ease of maintenance. Changes to the CIF operation and materials have been made to maximize system performance and minimize corrosion. This paper presents a brief overview of the incinerator design philosophy, pilot-scale testing results, and some of the lessons learned during the start-up testing of the CIF.

  10. Solvent pre-wetting as an effective start-up method for point-of-use filter

    NASA Astrophysics Data System (ADS)

    Umeda, Toru; Sugiyama, Shinichi; Nakamura, Takashi; Momota, Makoto; Sevegney, Michael; Tsuzuki, Shuichi; Numaguchi, Toru

    2012-03-01

    An effective filter start-up method has been required by device manufacturers, mainly in order to reduce waste volume of lithography process chemicals, which become more expensive as lithography technology advances. Remaining air was monitored during static-pressure-driven filter start-up. As a result, 3500 ml of the resist was needed to eliminate remaining air. For improvement, cyclohexanone pre-wetting was applied prior to the resist introduction. As a result, the resist volume needed for the solvent displacement was 1900 ml, approximately half the volume required for staticpressure- driven start-up. Other solvents were evaluated for the pre-wetting start-up method. Results, in descending order of performance were PGME (best) < PGMEA = IPA < cyclohexanone (worst). Moreover, air displacement performance strongly correlated with Hansen solubility parameter distance between each solvent and nylon 6,6 material.

  11. Partnering with the NIH: Now part of the “Value Proposition” for start-ups

    PubMed Central

    Ferguson, Steven M.

    2012-01-01

    With its “value proposition” statement a start-up company needs to convince potential investors or pharma partners how it will add more value or solve a problem better than others. High value, low cost assets such as those from the NIH ranging from technology to funding to assistance provide such biomedical firms an excellent jump-start in reaching their goals. PMID:23476116

  12. Cold startup and low temperature performance of the Brayton cycle electrical subsystem

    NASA Technical Reports Server (NTRS)

    Vrancik, J. E.; Bainbridge, R. C.

    1971-01-01

    Cold performance tests and startup tests were conducted on the Brayton-cycle inverter, motor-driven pump, dc supply, speed control with parasitic load resistor and the Brayton control system. These tests were performed with the components in a vacuum and mounted on coldplates. A temperature range of ?25 to -50 C was used for the tests. No failures occurred, and component performance gave no indication that there would be any problem with the safe operation of the Brayton power generating system.

  13. Experience from start-ups of the first ANITA Mox plants.

    PubMed

    Christensson, M; Ekström, S; Andersson Chan, A; Le Vaillant, E; Lemaire, R

    2013-01-01

    ANITA™ Mox is a new one-stage deammonification Moving-Bed Biofilm Reactor (MBBR) developed for partial nitrification to nitrite and autotrophic N-removal from N-rich effluents. This deammonification process offers many advantages such as dramatically reduced oxygen requirements, no chemical oxygen demand requirement, lower sludge production, no pre-treatment or requirement of chemicals and thereby being an energy and cost efficient nitrogen removal process. An innovative seeding strategy, the 'BioFarm concept', has been developed in order to decrease the start-up time of new ANITA Mox installations. New ANITA Mox installations are started with typically 3-15% of the added carriers being from the 'BioFarm', with already established anammox biofilm, the rest being new carriers. The first ANITA Mox plant, started up in 2010 at Sjölunda wastewater treatment plant (WWTP) in Malmö, Sweden, proved this seeding concept, reaching an ammonium removal rate of 1.2 kgN/m³ d and approximately 90% ammonia removal within 4 months from start-up. This first ANITA Mox plant is also the BioFarm used for forthcoming installations. Typical features of this first installation were low energy consumption, 1.5 kW/NH4-N-removed, low N₂O emissions, <1% of the reduced nitrogen and a very stable and robust process towards variations in loads and process conditions. The second ANITA Mox plant, started up at Sundets WWTP in Växjö, Sweden, reached full capacity with more than 90% ammonia removal within 2 months from start-up. By applying a nitrogen loading strategy to the reactor that matches the capacity of the seeding carriers, more than 80% nitrogen removal could be obtained throughout the start-up period.

  14. NTN Swiss Biotech - A Look at Support Measures for Dynamic Start-ups.

    PubMed

    Heinzelmann, Elsbeth

    2016-01-01

    The Swiss biotech landscape seems to be on a healthy footing: There are many imaginative start-ups, we have first-class hospitals, highly advanced clinical research and the availability of a great deal of capital. But we have no reason to rest on our laurels as countries like the USA lead the field. We must lay down the tracks today to remain an attractive country and maintain our ranking among the 10 best locations.

  15. Preheating of fluid in a supercritical Brayton cycle power generation system at cold startup

    DOEpatents

    Wright, Steven A.; Fuller, Robert L.

    2016-07-12

    Various technologies pertaining to causing fluid in a supercritical Brayton cycle power generation system to flow in a desired direction at cold startup of the system are described herein. A sensor is positioned at an inlet of a turbine, wherein the sensor is configured to output sensed temperatures of fluid at the inlet of the turbine. If the sensed temperature surpasses a predefined threshold, at least one operating parameter of the power generation system is altered.

  16. Checkout and start-up of the integrated DWPF (Defense Waste Processing Facility) melter system

    SciTech Connect

    Smith, M.E.; Hutson, N.D.; Miller, D.H.; Morrison, J.; Shah, H.; Shuford, J.A.; Glascock, J.; Wurzinger, F.H.; Zamecnik, J.R.

    1989-11-11

    The Integrated DWPF Melter System (IDMS) is a one-ninth-scale demonstration of the Defense Waste Processing Facility (DWPF) feed preparation, melter, and off-gas systems. The IDMS will be the first engineering-scale melter system at SRL to process mercury and flowsheet levels of halides and sulfates. This report includes a summary of the IDMS program objectives, system and equipment descriptions, and detailed discussions of the system checkout and start-up. 10 refs., 44 figs., 20 tabs.

  17. Startup of air-cooled condensers and dry cooling towers at low temperatures of the cooling air

    NASA Astrophysics Data System (ADS)

    Milman, O. O.; Ptakhin, A. V.; Kondratev, A. V.; Shifrin, B. A.; Yankov, G. G.

    2016-05-01

    The problems of startup and performance of air-cooled condensers (ACC) and dry cooling towers (DCT) at low cooling air temperatures are considered. Effects of the startup of the ACC at sub-zero temperatures are described. Different options of the ACC heating up are analyzed, and examples of existing technologies are presented (electric heating, heating up with hot air or steam, and internal and external heating). The use of additional heat exchanging sections, steam tracers, in the DCT design is described. The need for high power in cases of electric heating and heating up with hot air is noted. An experimental stand for research and testing of the ACC startup at low temperatures is described. The design of the three-pass ACC unit is given, and its advantages over classical single-pass design at low temperatures are listed. The formation of ice plugs inside the heat exchanging tubes during the start-up of ACC and DCT at low cooling air temperatures is analyzed. Experimental data on the effect of the steam flow rate, steam nozzle distance from the heat-exchange surface, and their orientation in space on the metal temperature were collected, and test results are analyzed. It is noted that the surface temperature at the end of the heat up is almost independent from its initial temperature. Recommendations for the safe start-up of ACCs and DCTs are given. The heating flow necessary to sufficiently heat up heat-exchange surfaces of ACCs and DCTs for the safe startup is estimated. The technology and the process of the heat up of the ACC with the heating steam external supply are described by the example of the startup of the full-scale section of the ACC at sub-zero temperatures of the cooling air, and the advantages of the proposed start-up technology are confirmed.

  18. Start-Up Scenario in Gyrotrons with a Nonstationary Microwave-Field Structure

    NASA Astrophysics Data System (ADS)

    Nusinovich, G. S.; Yeddulla, M.; Antonsen, T. M., Jr.; Vlasov, A. N.

    2006-03-01

    Megawatt class gyrotrons operate in very high-order modes. Therefore, control of a gyrotron oscillator’s start-up is important for excitation of the desired mode in the presence of the many undesired modes. Analysis of such scenario using the self-consistent code MAGY [M. Botton , IEEE Trans. Plasma Sci. 26,ITPSBD0093-3813 882 (1998)10.1109/27.700860] reveals that during start-up not only mode amplitudes vary in time, but also their axial structure can be time dependent. Simulations done for a 1.5 MW gyrotron show that the excitation of a single operating TE22,6 mode can exhibit a sort of intermittency when, first, it is excited as a mode whose axial structure extends outside the interaction cavity, then it ceases and then reappears as a mode mostly localized in the cavity. This phenomenon makes it necessary to analyze start-up scenarios in such gyrotrons with the use of codes that account for the possible evolution of field profiles.

  19. Start-Up and Transient Flow Effects From the Molecular Weight Distribution

    NASA Astrophysics Data System (ADS)

    Borg, Tommi; Pääkkönen, Esko J.

    2008-07-01

    Start-up and transient shear-stress flows are modeled here using the recently generated constitutive model for linear viscoelasticity of polymers. The relation derived from control theory and the melt calibration procedure has been developed between the relaxation modulus, dynamic viscosity, and molecular-weight distribution (MWD). This study extends the start-up, and transient effects of linear viscoelasticity on stress and viscosity from the novel viewpoint of the classical Boltzmann superposition principle. The shear viscosity measurements of well-characterized classical low-density polyethylene (LDPE IUPAC A) with a known MWD were used to obtain time-dependent stress and viscosity transitions. The developed formulas model the start-up situation with an overshoot effect and shear-stress growth coefficient. Simulations were performed for relaxation modulus measurements at different shear histories defined by the effective viscosity. As an example of practical application, injection molding for producing a cellular-phone cover were modeled to obtain the pressure loss and orientation level for every element in finite element models, which predicted the shrinking and warping of the end products.

  20. On a difficulty in eigenfunction expansion solutions for the start-up of fluid flow

    NASA Astrophysics Data System (ADS)

    Christov, Ivan C.

    2015-11-01

    Most mathematics and engineering textbooks describe the process of ``subtracting off'' the steady state of a linear parabolic partial differential equation as a technique for obtaining a boundary-value problem with homogeneous boundary conditions that can be solved by separation of variables (i.e., eigenfunction expansions). While this method produces the correct solution for the start-up of the flow of, e.g., a Newtonian fluid between parallel plates, it can lead to erroneous solutions to the corresponding problem for a class of non-Newtonian fluids. We show that the reason for this is the non-rigorous enforcement of the start-up condition in the textbook approach, which leads to a violation of the principle of causality. Nevertheless, these boundary-value problems can be solved correctly using eigenfunction expansions, and we present the formulation that makes this possible (in essence, an application of Duhamel's principle). The solutions obtained by this new approach are shown to agree identically with those obtained by using the Laplace transform in time only, a technique that enforces the proper start-up condition implicitly (hence, the same error cannot be committed). Supported, in part, by NSF Grant DMS-1104047 and the U.S. DOE (Contract No. DE-AC52-06NA25396) through the LANL/LDRD Program.

  1. Solenoid-free Plasma Start-up in NSTX using Transient CHI

    SciTech Connect

    Raman, R; Jarboe, T; Nelson, B; Mueller, D; Soukhanovskii, V A

    2009-01-05

    Experiments in NSTX have now demonstrated the coupling of toroidal plasmas produced by the technique of Coaxial Helicity Injection (CHI) to inductive sustainment and ramp-up of the toroidal plasma current. In these discharges, the central Ohmic transformer was used to apply an inductive loop voltage to discharges with a toroidal current of about 100 kA created by CHI. The coupled discharges have ramped up to >700 kA and transitioned into an H-mode demonstrating compatibility of this startup method with conventional operation. The electron temperature in the coupled discharges reached over 800 eV and the resulting plasma had low inductance, which is preferred for long-pulse high performance discharges. These results from NSTX in combination with the previously obtained record 160 kA non-inductively-generated startup currents in an ST or tokamak in NSTX demonstrate that CHI is a viable solenoid-free plasma startup method for future STs and tokamaks.

  2. [Influence of the difference in start-up echo on signal intensity in the FIESTA sequence].

    PubMed

    Naka, Takanori; Takahashi, Mitsuyuki

    2008-11-20

    The FIESTA sequence is a fast imaging method used for various parts in recent years. A constant flip angle (CFA) or linear flip angle (LFA) are used as the start-up echo in many cases. It is reported from CFA, which is the conventional method, that the T1 value and T2 value influence the speed that reaches steady state. However, there is no such report in LFA. Therefore, we examined the influence of the difference of start-up echo method upon signal intensity. In phantoms other than vegetable oil, the difference was not accepted in the change of speed that reaches steady state and the signal intensity in steady-state transit. In LFA, signal intensity of vegetable oil was clearly lower than CFA. The same result was obtained regardless of on or off resonance. From the result, it was thought that it depended on T2/T1 for the speed that reaches steady state. Moreover, the difference in resonant frequency was considered to greatly influence LFA but not CFA. That is, it was suggested by the difference in start-up echo that the signal intensity of fat changes greatly.

  3. Time-Frequency Analysis of Rocket Nozzle Wall Pressures During Start-up Transients

    NASA Technical Reports Server (NTRS)

    Baars, Woutijn J.; Tinney, Charles E.; Ruf, Joseph H.

    2011-01-01

    Surveys of the fluctuating wall pressure were conducted on a sub-scale, thrust- optimized parabolic nozzle in order to develop a physical intuition for its Fourier-azimuthal mode behavior during fixed and transient start-up conditions. These unsteady signatures are driven by shock wave turbulent boundary layer interactions which depend on the nozzle pressure ratio and nozzle geometry. The focus however, is on the degree of similarity between the spectral footprints of these modes obtained from transient start-ups as opposed to a sequence of fixed nozzle pressure ratio conditions. For the latter, statistically converged spectra are computed using conventional Fourier analyses techniques, whereas the former are investigated by way of time-frequency analysis. The findings suggest that at low nozzle pressure ratios -- where the flow resides in a Free Shock Separation state -- strong spectral similarities occur between fixed and transient conditions. Conversely, at higher nozzle pressure ratios -- where the flow resides in Restricted Shock Separation -- stark differences are observed between the fixed and transient conditions and depends greatly on the ramping rate of the transient period. And so, it appears that an understanding of the dynamics during transient start-up conditions cannot be furnished by a way of fixed flow analysis.

  4. Stable plasma start-up in the KSTAR device under various discharge conditions

    NASA Astrophysics Data System (ADS)

    Kim, Jayhyun; Yoon, S. W.; Jeon, Y. M.; Leuer, J. A.; Eidietis, N. W.; Mueller, D.; Park, S.; Nam, Y. U.; Chung, J.; Lee, K. D.; Hahn, S. H.; Bae, Y. S.; Kim, W. C.; Oh, Y. K.; Yang, H. L.; Park, K. R.; Na, H. K.; KSTAR Team

    2011-08-01

    A time series of static nonlinear ferromagnetic calculations was performed to mimic the time-dependent modelling of plasma start-up by assessing the effects of the ferromagnetic Incoloy 908 used in the superconducting coil jackets of the Korea Superconducting Tokamak Advanced Research (KSTAR) device. Time-series calculations of a two-dimensional axisymmetric circuit model with nonlinear ferromagnetic effects enabled us to find appropriate waveforms for the KSTAR poloidal field coil currents that satisfied various start-up requirements, such as the formation and sustainment of field nulls, a sufficient amount of magnetic flux for further plasma current ramp-up, sufficiently large Et ·Bt/Bbottom > 1 kV m-1 contours for successful breakdown, plasma current toroidal equilibria, etc. In addition to the aforementioned requirements, the results introduced in this report also provided the positional stability of the plasma current channel against radial as well as vertical perturbations by compensating the field deformation originating from the ferromagnetic effects. With the improved positional stability, robust plasma start-up was achieved during the 2010 KSTAR campaign under various discharge conditions such as the recovery process from plasma disruptions.

  5. Effects of Gravity on Start-up of a Miniature Loop Heat Pipe with Multiple Evaporators and Multiple Condensers

    NASA Technical Reports Server (NTRS)

    Ku, Jentung; Nagano, Hosei

    2007-01-01

    This paper describes an experimental study on the effect of gravity on the start-up of a miniature loop heat pipe (MLHP) with two evaporators and two condensers. Each evaporator has an outer diameter of 9 mm and has its own integral compensation chamber (CC). The MLHP was placed under five configurations where the relative elevation and tilt among the loop components were varied. The four well-known initial conditions between the evaporator and CC prior to the LHP start-up were created in this experimental study through combinations of: 1) the test configuration; 2) the method of preconditioning the loop prior to start-up, and 3) the heat load distribution among the evaporators. A total of 165 start-ups were conducted under the five test configurations. All of these start-ups were successful. However, the effect of gravity on start-up transients was clearly seen under otherwise the same heat load distribution and sink temperatures. An analytical model was used to simulate the MLHP transient behaviors, and the model predictions agreed very well with the experimental results.

  6. A thermal model to evaluate sub-freezing startup for a direct hydrogen hybrid fuel cell vehicle polymer electrolyte fuel cell stack and system

    NASA Astrophysics Data System (ADS)

    Sundaresan, Meenakshi

    For passenger fuel cell vehicles (FCVs), customers will expect to start the vehicle and drive almost immediately, implying a very short system warmup to full power. While hybridization strategies may fulfill this expectation, the extent of hybridization will be dictated by the time required for the fuel cell system to reach normal operating temperatures. Quick-starting fuel cell systems are impeded by two problems: (1) the freezing of residual water or water generated by starting the stack at below freezing temperatures and (2) temperature-dependent fuel cell performance, improving as the temperature reaches the normal range. Cold start models exist in the literature; however, there does not appear to be a model that fully captures the thermal characteristics of the stack during sub-freezing startup conditions. Existing models do not include stack internal heating methods or endplate thermal mass effect on end cells. The focus of this research is the development and use of a sub-freezing thermal model for a polymer electrolyte fuel cell stack and system designed for integration within a direct hydrogen hybrid FCV. The stack is separated into individual cell layers to determine an accurate temperature distribution within the stack. Unlike a lumped model, which may use a single temperature as an indicator of the stack's thermal condition, a layered model can reveal the effect of the endplate thermal mass on the end cells, and accommodate the evaluation of internal heating methods that may mitigate this effect. This research is designed to answer the following motivating questions: (1) What detailed thermal model design will accurately characterize the fuel cell stack and system during the sub-freezing startup operation? (2) What are the effects of different startup strategies on energy consumption and time to normal operation? These questions are addressed in this dissertation. Major research findings include the following recommendations for the best startup

  7. Graduating into Start-up: Exploring the Transition

    ERIC Educational Resources Information Center

    Nabi, Ghulam; Holden, Rick; Walmsley, Andreas

    2009-01-01

    The main purpose of the exploratory research discussed in this paper was to generate insights into the complexity of the career-making processes involved in the transition from being a student to starting up a business. Using story-telling interviews, data were collected from fifteen graduates based in the Yorkshire region of the UK. Qualitative…

  8. Criticality Benchmark Analysis of the HTTR Annular Startup Core Configurations

    SciTech Connect

    John D. Bess

    2009-11-01

    One of the high priority benchmarking activities for corroborating the Next Generation Nuclear Plant (NGNP) Project and Very High Temperature Reactor (VHTR) Program is evaluation of Japan's existing High Temperature Engineering Test Reactor (HTTR). The HTTR is a 30 MWt engineering test reactor utilizing graphite moderation, helium coolant, and prismatic TRISO fuel. A large amount of critical reactor physics data is available for validation efforts of High Temperature Gas-cooled Reactors (HTGRs). Previous international reactor physics benchmarking activities provided a collation of mixed results that inaccurately predicted actual experimental performance.1 Reevaluations were performed by the Japanese to reduce the discrepancy between actual and computationally-determined critical configurations.2-3 Current efforts at the Idaho National Laboratory (INL) involve development of reactor physics benchmark models in conjunction with the International Reactor Physics Experiment Evaluation Project (IRPhEP) for use with verification and validation methods in the VHTR Program. Annular cores demonstrate inherent safety characteristics that are of interest in developing future HTGRs.

  9. Engineering Work Plan for the Development of Phased Startup Initiative (PSI) Phases 3 and 4 Test Equipment

    SciTech Connect

    PITNER, A.L.

    2000-04-11

    A number of tools and equipment pieces are required to facilitate planned test operations during Phases 3 and 4 of the Phased Startup Initiative (PSI). These items will be used in assessing residual canister sludge quantities on cleaned fuel assemblies, sorting coarse and fine scrap fuel pieces, assessing the size distribution of scrap pieces, loading scrap into a canister, and measuring the depth of the accumulated scrap in a canister. This work plan supercedes those previously issued for development of several of these test items. These items will be considered prototype equipment until testing has confirmed their suitability for use in K West Basin. The process described in AP-EN-6-032 will be used to qualify the equipment for facility use. These items are considered non-OCRWM for PSI Phase 3 applications. The safety classification of this equipment is General Service, with Quality Level 0 (for PSI Phase 3). Quality Control inspections shall be performed to verify basic dimensions and overall configurations of fabricated components, and any special quality control verifications specified in this work plan (Section 3.1.5). These inspections shall serve to approve the test equipment for use in K West Basin (Acceptance Tag). This equipment is for information gathering only during PSI Phases 3 and 4 activities, and will be discarded at the completion of PSI. For equipment needed to support actual production throughput, development/fabrication/testing activities would be more rigorously controlled.

  10. Startup of the experimental physics industrial control system at NSTX

    SciTech Connect

    Sichta, P.; Dong, J.

    1999-12-17

    The Experimental Physics Industrial Control System (EPICS) is a set of software which is being used as the basis of the National Spherical Torus Experiment's (NSTX) Process Control System, a major element of the NSTX's Central Instrumentation and Control System. EPICS is a result of a co-development effort started by several US Department of Energy National Laboratories. EPICS is actively supported through an international collaboration made up of government and industrial users. EPICS' good points include portability, scalability, and extensibility. A drawback for small experiments is that a wide range of software skills are necessary to get the software tools running for the process engineers. The authors' experience in designing, developing, operating, and maintaining NSTX's EPICS (system) will be reviewed.

  11. Activity Based Astronomy for Primary Science Programs.

    ERIC Educational Resources Information Center

    Ginns, Ian

    Print materials in astronomy such as books, journals, charts, and posters are typically the sources of information for teachers and children about the moon, the sun, lunar and solar eclipses, planetary sizes, distances of planets from the sun, planetary atmospheres, and so on. This paper describes and analyzes a number of activities designed to…

  12. Teaching Activity-Based Taxicab Geometry

    ERIC Educational Resources Information Center

    Ada, Tuba

    2013-01-01

    This study aimed on the process of teaching taxicab geometry, a non-Euclidean geometry that is easy to understand and similar to Euclidean geometry with its axiomatic structure. In this regard, several teaching activities were designed such as measuring taxicab distance, defining a taxicab circle, finding a geometric locus in taxicab geometry, and…

  13. Description of data base management systems activities

    NASA Technical Reports Server (NTRS)

    1983-01-01

    One of the major responsibilities of the JPL Computing and Information Services Office is to develop and maintain a JPL plan for providing computing services to the JPL management and administrative community that will lead to improved productivity. The CISO plan to accomplish this objective has been titled 'Management and Administrative Support Systems' (MASS). The MASS plan is based on the continued use of JPL's IBM 3032 Computer system for administrative computing and for the MASS functions. The current candidate administrative Data Base Management Systems required to support the MASS include ADABASE, Cullinane IDMS and TOTAL. Previous uses of administrative Data Base Systems have been applied to specific local functions rather than in a centralized manner with elements common to the many user groups. Limited capacity data base systems have been installed in microprocessor based office automation systems in a few Project and Management Offices using Ashton-Tate dBASE II. These experiences plus some other localized in house DBMS uses have provided an excellent background for developing user and system requirements for a single DBMS to support the MASS program.

  14. Neutron counter based on beryllium activation

    SciTech Connect

    Bienkowska, B.; Prokopowicz, R.; Kaczmarczyk, J.; Paducha, M.; Scholz, M.; Igielski, A.; Karpinski, L.; Pytel, K.

    2014-08-21

    The fusion reaction occurring in DD plasma is followed by emission of 2.45 MeV neutrons, which carry out information about fusion reaction rate and plasma parameters and properties as well. Neutron activation of beryllium has been chosen for detection of DD fusion neutrons. The cross-section for reaction {sup 9}Be(n, α){sup 6}He has a useful threshold near 1 MeV, which means that undesirable multiple-scattered neutrons do not undergo that reaction and therefore are not recorded. The product of the reaction, {sup 6}He, decays with half-life T{sub 1/2} = 0.807 s emitting β{sup −} particles which are easy to detect. Large area gas sealed proportional detector has been chosen as a counter of β–particles leaving activated beryllium plate. The plate with optimized dimensions adjoins the proportional counter entrance window. Such set-up is also equipped with appropriate electronic components and forms beryllium neutron activation counter. The neutron flux density on beryllium plate can be determined from the number of counts. The proper calibration procedure needs to be performed, therefore, to establish such relation. The measurements with the use of known β–source have been done. In order to determine the detector response function such experiment have been modeled by means of MCNP5–the Monte Carlo transport code. It allowed proper application of the results of transport calculations of β{sup −} particles emitted from radioactive {sup 6}He and reaching proportional detector active volume. In order to test the counter system and measuring procedure a number of experiments have been performed on PF devices. The experimental conditions have been simulated by means of MCNP5. The correctness of simulation outcome have been proved by measurements with known radioactive neutron source. The results of the DD fusion neutron measurements have been compared with other neutron diagnostics.

  15. Business Approach To Lunar Base Activation

    NASA Astrophysics Data System (ADS)

    Schmitt, Harrison H.

    2003-01-01

    It remains unlikely that any government or group of governments will make the long-term funding commitments necessary to return to the Moon in support of scientific goals or resource production. If a lunar base is to be established within the foreseeable future, it will support of commercial production and use of unique energy resources Business plan development for commercial production and use of lunar Helium-3 requires a number of major steps, including identification of the required investor base and development of fusion power technology through a series of business bridges that provide required rates of return.

  16. Determination of allowable fluid temperature during start-up operation of outlet header under the assumption of constant and temperature-dependent material properties

    NASA Astrophysics Data System (ADS)

    Rząsa, Dariusz; Duda, Piotr

    2013-09-01

    Modern supercritical power plants operate at very high temperatures and pressures. Thus the construction elements are subjected to both high thermal and mechanical loads. As a result high stresses in those components are created. In order to operate safely, it is important to monitor stresses, especially during start-up and shut-down processes. The maximum stresses in the construction elements should not exceed the allowable stresses that are defined according to boiler regulations. It is important to find optimum operating parameters, that can assure safe heating and cooling processes. The optimum parameters define temperature and pressure histories that can keep the highest stresses within allowable limit and reduce operation time as much as possible. In this paper a new numerical method for determining optimum working fluid parameters is presented. In this method, properties of steel can be assumed as constant or temperature dependent. The constant value is taken usually at the average temperature of the operation cycle. For both cases optimal parameters are determined. Based on these parameters start-up operations for both cases are conducted. During entire processes stresses in the heated element are monitored. The results obtained are compared with German boiler regulations - Technische Regeln fur Dampfkessel 301.

  17. Activity Landscape Plotter: A Web-Based Application for the Analysis of Structure-Activity Relationships.

    PubMed

    González-Medina, Mariana; Méndez-Lucio, Oscar; Medina-Franco, José L

    2017-03-27

    Activity landscape modeling is a powerful method for the quantitative analysis of structure-activity relationships. This cheminformatics area is in continuous growth, and several quantitative and visual approaches are constantly being developed. However, these approaches often fall into disuse due to their limited access. Herein, we present Activity Landscape Plotter as the first freely available web-based tool to automatically analyze structure-activity relationships of compound data sets. Based on the concept of activity landscape modeling, the online service performs pairwise structure and activity relationships from an input data set supplied by the user. For visual analysis, Activity Landscape Plotter generates Structure-Activity Similarity and Dual-Activity Difference maps. The user can interactively navigate through the maps and export all the pairwise structure-activity information as comma delimited files. Activity Landscape Plotter is freely accessible at https://unam-shiny-difacquim.shinyapps.io/ActLSmaps /.

  18. 24 CFR 92.257 - Faith-based activities.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Faith-based activities. 92.257 Section 92.257 Housing and Urban Development Office of the Secretary, Department of Housing and Urban Development HOME INVESTMENT PARTNERSHIPS PROGRAM Project Requirements § 92.257 Faith-based activities....

  19. 24 CFR 92.257 - Faith-based activities.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 24 Housing and Urban Development 1 2011-04-01 2011-04-01 false Faith-based activities. 92.257 Section 92.257 Housing and Urban Development Office of the Secretary, Department of Housing and Urban Development HOME INVESTMENT PARTNERSHIPS PROGRAM Project Requirements § 92.257 Faith-based activities....

  20. Behavioral Activation Is an Evidence-Based Treatment for Depression

    ERIC Educational Resources Information Center

    Sturmey, Peter

    2009-01-01

    Recent reviews of evidence-based treatment for depression did not identify behavioral activation as an evidence-based practice. Therefore, this article conducted a systematic review of behavioral activation treatment of depression, which identified three meta-analyses, one recent randomized controlled trial and one recent follow-up of an earlier…

  1. Active vibration isolation platform on base of magnetorheological elastomers

    NASA Astrophysics Data System (ADS)

    Mikhailov, Valery P.; Bazinenkov, Alexey M.

    2017-06-01

    The article describes the active vibration isolation platform on base of magnetorheological (MR) elastomers. An active damper based on the MR elastomers can be used as an actuator of micro- or nanopositioning for a vibroinsulated object. The MR elastomers give such advantages for active control of vibration as large range of displacements (up to 1 mm), more efficient absorption of the vibration energy, possibility of active control of amplitude-frequency characteristics and positioning with millisecond response speed and nanometer running accuracy. The article presents the results of experimental studies of the most important active damper parameters. Those are starting current, transient time for stepping, transmission coefficient of the vibration displacement amplitude.

  2. Description of data base management activities

    NASA Technical Reports Server (NTRS)

    1983-01-01

    ARC's current and future data processing needs have been identified and defined. Requirements for improved data processing capabilities are listed: (1) Centralized control of system data files. Establish a DBA/data base administrator position with responsibility for management of the Centers numerous data bases; (2) Programmer tools to improve efficiency of performance; (3) Direct and timely access to information. Presently, the user submits query requests to the data processing department where they are prioritized with other queries and then batch processed using a report generator; (4) On line data entry. With the merger of the Dryden facility with ARC on line data entry, edit and updates have become mandatory for timely operation and reporting. A DBMS software package was purchased to meet the above requirements.

  3. BENCHMARK EVALUATION OF THE START-UP CORE REACTOR PHYSICS MEASUREMENTS OF THE HIGH TEMPERATURE ENGINEERING TEST REACTOR

    SciTech Connect

    John Darrell Bess

    2010-05-01

    The benchmark evaluation of the start-up core reactor physics measurements performed with Japan’s High Temperature Engineering Test Reactor, in support of the Next Generation Nuclear Plant Project and Very High Temperature Reactor Program activities at the Idaho National Laboratory, has been completed. The evaluation was performed using MCNP5 with ENDF/B-VII.0 nuclear data libraries and according to guidelines provided for inclusion in the International Reactor Physics Experiment Evaluation Project Handbook. Results provided include updated evaluation of the initial six critical core configurations (five annular and one fully-loaded). The calculated keff eigenvalues agree within 1s of the benchmark values. Reactor physics measurements that were evaluated include reactivity effects measurements such as excess reactivity during the core loading process and shutdown margins for the fully-loaded core, four isothermal temperature reactivity coefficient measurements for the fully-loaded core, and axial reaction rate measurements in the instrumentation columns of three core configurations. The calculated values agree well with the benchmark experiment measurements. Fully subcritical and warm critical configurations of the fully-loaded core were also assessed. The calculated keff eigenvalues for these two configurations also agree within 1s of the benchmark values. The reactor physics measurement data can be used in the validation and design development of future High Temperature Gas-cooled Reactor systems.

  4. Mechanical shear contributes to granule formation resulting in quick start-up and stability of a hybrid anammox reactor.

    PubMed

    Gao, Yanning; Liu, Zhijun; Liu, Fengxia; Furukawa, Kenji

    2012-06-01

    It appears that if suspended biomass washout can be reduced effectively, granule formation will be fastened in fluidized bed. Quicker reactor start-up can be anticipated especially for those system keeping slow growth bacteria such as anammox. A hybrid reactor combined fixed-bed with nonwoven fabrics as biomass carrier and fluidized bed with slow speed mechanical stirring was therefore developed, and its nitrogen removal performances was evaluated experimentally. Only in 38 days, the total nitrogen removal rate (NRR) reached to 1.9 kg(N) m(-3) day (-1) and then doubled within 17 days, with total nitrogen removal efficiency kept above 70%. After 180 days reactor operating, the NRR reached a maximum value of 6.6 kg(N) m(-3) day(-1) and the specific anammox activity was gradually constant in 0.32 kg(N) kg(VSS)(-1) day(-1). Biomass attached on nonwoven fabrics could additionally improve reactor nitrogen removal by 8%. The dominant size of granular sludge reached to 0.78 mm with stirring speed adjusted from 30 to 80 rpm and the hydraulic retention time (HRT) from 8 to 1.5 h during the whole operating time. Scanning electron microscope observation showed especially compact structure of granular sludge. A 70% of anammox bacteria percentage was identified by fluorescence in situ hybridization analysis.

  5. Start-up period investigation of pilot-scale submerged membrane electro-bioreactor (SMEBR) treating raw municipal wastewater.

    PubMed

    Hasan, Shadi W; Elektorowicz, Maria; Oleszkiewicz, Jan A

    2014-02-01

    Submerged membrane electro-bioreactor (SMEBR) is a new hybrid technology for wastewater treatment employing electrical field and microfiltration in a nutrient-removing activated sludge process. A pilot SMEBR system was located at the wastewater treatment plant in the City of l'Assomption (Quebec, Canada) with the objective of investigating the start-up period performance under variable organic loadings and environmental conditions with respect to effluent quality, membrane fouling, and sludge properties. The pilot SMEBR facility was fed with the raw de-gritted municipal wastewater. At steady state operation, the removal efficiencies of ammonia (as NH3(+)-N), phosphorus (as PO4(3-)-P), and COD were 99%, 99%, and 92%, respectively. No substantial increase in the monitored transmembrane pressure as 0.02kPad(-1) was reported. The time necessary to filter 100mL of the sludge sample has decreased by 78% after treatment whilst the sludge volume index averaged 119mLg(-1). Energy requirements were in the range of 1.1-1.6kWhm(-3) of wastewater. It was concluded that the SMEBR is a very competitive technology when compared to conventional membrane systems as it can enhance treatment performance to an appreciable extent, remove phosphorus and reduce fouling.

  6. Start-up of a full-scale deammonification SBR-treating effluent from digested sludge dewatering.

    PubMed

    Lackner, Susanne; Thoma, Konrad; Gilbert, Eva M; Gander, Wolfgang; Schreff, Dieter; Horn, Harald

    2015-01-01

    This study shows the start-up and operation of a full-scale sequencing batch reactor (SBR) with a volume of 550 m³ for deammonification of reject water from sludge dewatering over the first 650 days of operation. The SBR was operated with discontinuous aeration and achieved an optimum of around 85% of ammonium removal at a load of 0.17 kg m⁻³ d⁻¹. The application of batch tests for the activity measurement of aerobic ammonium and nitrite oxidizing bacteria and anaerobic ammonium oxidizing bacteria were proven to support the identification of setbacks in reactor operation. Furthermore, the calculation of the oxygen uptake rates from online oxygen measurements helped to explain the overall reactor performance. The aeration regime is a key parameter for stable operation of such an SBR for deammonification. At aeration/non-aeration time ranges from 6-9 min, the best results with respect to turnover rates and low nitrate production were achieved. Compared with the nitrification/denitrification SBR operated in parallel with methanol as the carbon source, a significant reduction in costs for energy and chemicals was achieved. The costs for maintenance slightly increased.

  7. Start-up of low-temperature anammox in UASB from mesophilic yeast factory anaerobic tank inoculum.

    PubMed

    Zekker, Ivar; Rikmann, Ergo; Tenno, Toomas; Kroon, Kristel; Seiman, Andrus; Loorits, Liis; Fritze, Hannu; Tuomivirta, Tero; Vabamäe, Priit; Raudkivi, Markus; Mandel, Anni; Tenno, Taavo

    2015-01-01

    Robust start-up of the anaerobic ammonium oxidation (anammox) process from non-anammox-specific seeding material was achieved by using an inoculation with sludge-treating industrial [Formula: see text]-, organics- and N-rich yeast factory wastewater. N-rich reject water was treated at 20°C, which is significantly lower than optimum treatment temperature. Increasing the frequency of biomass fluidization (from 1-2 times per day to 4-5 times per day) through feeding the reactor with higher flow rate resulted in an improved total nitrogen removal rate (from 100 to 500 g m(-3)d(-1)) and increased anammox bacteria activity. As a result of polymerase chain reaction (PCR) tests, uncultured planctomycetes clone 07260064(4)-2-M13-_A01 (GenBank: JX852965) was identified from the biomass taken from the reactor. The presence of anammox bacteria after cultivation in the reactor was confirmed by quantitative PCR (qPCR); an increase in quantity up to ∼2×10(6) copies g VSS(-1) during operation could be seen in qPCR. Statistical modelling of chemical parameters revealed the roles of several optimized parameters needed for a stable process.

  8. Availability of hydrogen for lunar base activities

    NASA Technical Reports Server (NTRS)

    Bustin, Roberta; Gibson, Everett K., Jr.

    1992-01-01

    Hydrogen will be needed on a lunar base to make water for consumables, to provide fuel, and to serve as a reducing agent in the extraction of oxygen from lunar minerals. This study was undertaken in order to learn more about the abundance and distribution of solar-wind-implanted hydrogen. Hydrogen was found in all samples studied, with concentrations, varying widely depending on soil maturity, grain size, and mineral composition. Seven cores returned from the Moon were studied. Although hydrogen was implanted in the upper surface layer of the regolith, it was found throughout the cores due to micrometeorite reworking of the soil.

  9. Availability of hydrogen for lunar base activities

    NASA Technical Reports Server (NTRS)

    Bustin, Roberta

    1990-01-01

    Hydrogen will be needed on a lunar base to make water for consumables, to provide fuel, and to serve as reducing agent in the extraction of oxygen from lunar minerals. The abundance and distribution of solar wind implanted hydrogen were studied. Hydrogen was found in all samples studied with concentrations varying widely depending on soil maturity, grain size, and mineral composition. Seven cores returned from the moon were studied. Although hydrogen was implanted in the upper surface layer of the regolith, it was found throughout the cores due to micrometeorite reworking of the soil.

  10. Design and startup of a high efficiency, dilute phase lime FGD system

    SciTech Connect

    Walsh, M.; Cirillo, A.J.

    1995-06-01

    The Clean Air Act Amendments mandated large reductions in SO{sub 2} emissions from utility coal-fired boilers. For the operating companies of the Allegheny Power System (APS), this presented numerous challenges due to the system`s dependence on coal fuel. Although the Clean Air Act Amendments mandated approximately 50% reduction in SO{sub 2} at eleven (11) generating units within the Allegheny system, economic studies revealed that high efficiency scrubbers, placed on the largest units, would provide the most cost effective method to reduce SO{sub 2} emissions. Accordingly, the three units at Harrison Power Station, with a total generating capacity of 1,920 MW, were targeted for wet, magnesium enhanced, lime scrubbing. The scrubbing of the Harrison Power Station represented the cornerstone of Allegheny`s Phase I Clean Air Act compliance strategy for SO{sub 2} only. At the heart of the Flue Gas Desulfurization System (FGD) are high efficiency absorber towers utilizing magnesium-enhanced lime as the reagent. Use of a single, large absorber tower on each of Harrison`s three 640 MW units will result in guaranteed SO{sub 2} removal efficiencies of 98% with only three recycle pumps operating. In addition to discussing the overall FGD system`s design, this paper will address the following items: (1) Reliability of Large Single Tower Scrubbing (European experience and use of an absorber tower scale model for gas and liquid flow distribution); (2) Absorber Process Chemistry and Dilute Phase FGD System Startup and Operation. In conjunction with the aforementioned process design features of the Harrison Power Station FGD System, the startup and operational aspects of the scrubber system will be reviewed. Specifically, the simplified startup and operation of these wet scrubbers, owing to the minimization of the quantity of components required to be installed, tested and maintained compared to multiple absorber modules per boiler unit, will be addressed.

  11. Analysis of Transient and Start-Up Behavior of Heat Pipes and an Energy Storage Module

    DTIC Science & Technology

    1990-06-01

    4-G - .. JT 77 roqpy AD- A225 659 WRDC-TR-90-2031 ANALYSIS OF TRANSIENT AND START-UP BEHAVIOR OF HEAT PIPES AND AN ENERGY STORAGE MODULE Amir Faghri...po)/PfUo2 (Section III) (p + pgy) H/p a (Section V) P reference pressure for the Clausius-Clapeyron equation, N/m 2 P Cr reference pressure for the...the 90 saturation temperature of the vapor from the pressure as given by Ts=1 1 (4.37) 1 u In P cr fg Pcr The axisymmetric condition along the

  12. Startup performance of the traveling wave versus standing wave linear accelerator.

    PubMed

    Buchgeister, M; Nüsslin, F

    1998-04-01

    The startup performance of medical linear accelerators is of increasing importance for modern radiotherapy techniques. The traveling wave-type linear accelerator of the SL series of Philips (now Elekta Oncology Systems) has been modified in its flight tube design to meet this goal of a fast rise time of the radiation field. The new slitless flight tube combined with a redesigned gun servo electronic now achieves start up times of the radiation comparable with those of a standing wave linear accelerator (Siemens Mevatron) according to our measurements.

  13. The exact solution of Stokes' second problem including start-up process with fractional element

    NASA Astrophysics Data System (ADS)

    Hu, Kaixin; Zhu, Keqin

    2009-10-01

    The start-up process of Stokes’ second problem of a viscoelastic material with fractional element is studied. The fluid above an infinite flat plane is set in motion by a sudden acceleration of the plate to steady oscillation. Exact solutions are obtained by using Laplace transform and Fourier transform. It is found that the relationship between the first peak value and the one of equal-amplitude oscillations depends on the distance from the plate. The amplitude decreases for increasing frequency and increasing distance.

  14. Design and startup of a membrane-biological-reactor system at a Ford-engine plant for treating oily wastewater.

    PubMed

    Kim, B R; Anderson, J E; Mueller, S A; Gaines, W A; Szafranski, M J; Bremmer, A L; Yarema, G J; Guciardo, C D; Linden, S; Doherty, T E

    2006-04-01

    A wastewater-treatment facility at Ford (Dearborn, Michigan) was recently upgraded from chemical de-emulsification to ultrafiltration (UF) followed by a membrane-biological reactor (MBR). This paper describes the design, startup, and initial operational performance of the facility. Primary findings are as follows: (1) the MBR proved resilient; (2) the MBR removed approximately 90% of chemical-oxygen demand (COD) after primary UF; (3) the removal of total Kjeldahl nitrogen by MBR appeared to be more sensitive to operating conditions than COD removal; (4) nitrification and denitrification were established in one month; (5) the MBR removed oil and grease and phenolics to below detection levels consistently, in contrast to widely fluctuating concentrations in the past; (6) permeate fluxes of the primary and MBR UF were adversely affected by inadvertent use of a silicone-based defoamer; and (7) zinc concentrations in the effluent increased, which might have been a result of ethylenediaminetetraacetic acid used in membrane washing solutions and/or might have been within typical concentration ranges.

  15. Start-up of a pilot-scale anaerobic fixed film reactor at low temperature treating slaughterhouse wastewater.

    PubMed

    del Pozo, R; Diez, V; Salazar, G

    2002-01-01

    A pilot-scale anaerobic fixed film reactor (AFFR) with vertically arranged PVC tubes as biomass carrier, treating poultry slaughterhouse wastewater was started-up in 74 days at temperatures between 20-24 degrees C. The start-up process consisted of a long acclimatization phase followed by a low loaded growth phase, a gradual increase of OLR upto 9.2 kg COD/m3d, and a final maturation phase at moderated loads of 2.7 kg COD/m3d at which total COD removal efficiencies of 57% were achieved. Alkalinity ratio IA:PA was found to be the best control parameter to avoid VFA accumulation. OLR increase based on pH control was not satisfactory because changes in CO2 solubility caused daily by temperature and flow variations led to pH oscillations of 0.2 units. The low wastewater alkalinity, 260 mg/l CaCO3 was insufficient to buffer the pH system, therefore the pH decrease associated with the VFA accumulation was not easily detected and could not be used as a way of OLR control. Organic matter removal took place by accumulation and biodegradation processes. Limitation in the reactor hydrodynamics and particulate fraction hydrolysis was detected at high flow rates.

  16. Numerical simulation on the "S" characteristics and pressure fluctuation of reduced pump-turbine at start-up condition

    NASA Astrophysics Data System (ADS)

    Liu, D. M.; Zheng, J. S.; Wen, G. Z.; Zhao, Y. Z.; Shi, Q. H.

    2012-11-01

    The performance of a reversible pump turbine with S-shaped characteristics is of great importance to the transition processes such as start-up and load rejection. In order to improve the "S" characteristics of reduced pump-turbine, several MGV (misaligned guide vane) schemes are calculated. The SST (shear stress turbulence) model is added to the N-S (Navier-strokes) governing equation. In order to predict the S-shaped curve accurately and develop a reliable tool for design improvement, the "S" characteristic is investigated in a whole pump-turbine including spiral casing, stay vanes, guide vanes, runner and draft tube. To validate the scheme reasonable, the mesh independent is tested. Comparison of unit discharge and unit speed performance showed that good correspondence is obtained between experimental data and calculated results. The "S shape" of reduced pump-turbine is eliminated with MGV schemes. Based on this, internal flow analysis is carried out adopting six typical MGV schemes at the same working condition. Through the calculation, we find that, first the pressure fluctuation is different between the guide vane and runner among the five MGV schemes, second the pressure fluctuation amplitude of MGV schemes D (4*35° and 16*6° average installed) is smallest, third the main frequency is the blade passing frequency and guide vane passing frequency at vane-less space and head cover, respectively. The conclusion is the "S shape" of pump-turbine can be improved with the average installed scheme.

  17. Implementation of Activity Based Cost Management Aboard Base Installations

    DTIC Science & Technology

    2004-09-01

    Shared Services Concept (After Penn State Briefing) .....................................30 Figure 8. Command Levels and Applicable Tools (From...resulting analysis of this duplication of efforts resulted in what they refer to as the “ Shared Services Concept.” Simply put, there should be “no...more than one of anything in the Base organization.” (Penn State Briefing) This Shared Services concept combined common support services that were

  18. The real world and lunar base activation scenarios

    NASA Technical Reports Server (NTRS)

    Schmitt, Harrison H.

    1992-01-01

    A lunar base or a network of lunar bases may have highly desirable support functions in a national or international program to explore and settle Mars. In addition, He-3 exported from the Moon could be the basis for providing much of the energy needs of humankind in the twenty-first century. Both technical and managerial issues must be addressed when considering the establishment of a lunar base that can serve the needs of human civilization in space. Many of the technical issues become evident in the consideration of hypothetical scenarios for the activation of a network of lunar bases. Specific and realistic assumptions must be made about the conduct of various types of activities in addition to the general assumptions given above. These activities include landings, crew consumables, power production, crew selection, risk management, habitation, science station placement, base planning, science, agriculture, resource evaluation, readaptation, plant activation and test, storage module landings, resource transport module landings, integrated operations, maintenance, Base 2 activation, and management. The development of scenarios for the activation of a lunar base or network of bases will require close attention to the 'real world' of space operations. That world is defined by the natural environment, available technology, realistic objectives, and common sense.

  19. Electrical conductivity as a state indicator for the start-up period of anaerobic fixed-bed reactors.

    PubMed

    Robles, A; Latrille, E; Ribes, J; Bernet, N; Steyer, J P

    2016-01-01

    The aim of this work was to analyse the applicability of electrical conductivity sensors for on-line monitoring the start-up period of an anaerobic fixed-bed reactor. The evolution of bicarbonate concentration and methane production rate was analysed. Strong linear relationships between electrical conductivity and both bicarbonate concentration and methane production rate were observed. On-line estimations of the studied parameters were carried out in a new start-up period by applying simple linear regression models, which resulted in a good concordance between both observed and predicted values. Electrical conductivity sensors were therefore identified as an interesting method for monitoring the start-up period of anaerobic fixed-bed reactors due to its reliability, robustness, easy operation, low cost, and minimum maintenance compared with the currently used sensors.

  20. Startup and long term operation of enhanced biological phosphorus removal in continuous-flow reactor with granules.

    PubMed

    Li, Dong; Lv, Yufeng; Zeng, Huiping; Zhang, Jie

    2016-07-01

    The startup and long term operation of enhanced biological phosphorus removal (EBPR) in a continuous-flow reactor (CFR) with granules were investigated in this study. Through reducing the settling time from 9min to 3min gradually, the startup of EBPR in a CFR with granules was successfully realized in 16days. Under continuous-flow operation, the granules with good phosphorus and COD removal performance were stably operated for more than 6months. And the granules were characterized with particle size of around 960μm, loose structure and good settling ability. During the startup phase, polysaccharides (PS) was secreted excessively by microorganisms to resist the influence from the variation of operational mode. Results of relative quantitative PCR indicated that granules dominated by polyphosphate-accumulating organisms (PAOs) were easier accumulated in the CFR because more excellent settling ability was needed in the system.

  1. Kinetic start-up performance of two large treatment plants for nutrient removal.

    PubMed

    Haarbo, A; Harremoës, P; Thirsing, C

    2001-01-01

    In 1987 an action plan was passed in the Danish Parliament demanding a considerable reduction of the discharge of nutrients to the aquatic environment in Denmark. Consequently, the two largest wastewater treatment plants in the Copenhagen area had to be upgraded to include nutrient removal. For more than 8 years an extensive effort has been made to determine an optimum solution for this upgrading from a technical and financial point of view. The work included six years of comprehensive pilot plant investigations with the aim of thoroughly studying and interpreting the kinetics of the processes involved. The investigations revealed valuable information particularly concerning limitations of the nitrification process. Consequently, the investigations contributed to an expectation of no unforeseen problems during the implementation of the upgraded plants. This paper presents the results of the start-up of the two full-scale plants with the main emphasis laid on the kinetic performance in relation to the information achieved from the pilot tests. The results showed that the start-up of the full scale plants proceeded with great accuracy as expected from the investigations. Accordingly, the implementation of the plants was carried out successfully, ending an era of more than 10 years in total.

  2. Transient coaxial helicity injection for solenoid-free plasma startup in HIT-II

    SciTech Connect

    Raman, R.; Jarboe, T. R; Hamp, W. T.; Redd, A. J.; Nelson, B. A.; O'Neill, R. G.; Sieck, P. E.; Smith, R. J.

    2007-02-15

    The favorable properties of the spherical torus (ST) arise from its very small aspect ratio. Methods for initiating the plasma current without relying on induction from a central solenoid are essential for the viability of the ST concept. In steady state tokamaks, the central solenoid can be dispensed with if suitable methods for initiating the plasma current are on hand. Coaxial helicity injection (CHI) is a promising candidate for solenoid-free plasma current startup in STs and tokamaks. Experiments on the Helicity Injected Torus (HIT-II) machine at the University of Washington [T. R. Jarboe, Fusion Technol. 15, 7 (1989)] have demonstrated the capability of a new method, referred to as transient CHI, to produce a high quality closed-flux equilibrium that has been successfully coupled to induction demonstrating that this new plasma current startup method is compatible with the conventional inductive method. This paper presents physics requirements for implementing this method in STs and tokamaks and supporting experimental results from the HIT-II device.

  3. Boiler startup under conditions of convective heating of the highly reactive coal dust

    NASA Astrophysics Data System (ADS)

    Zhuikov, A. V.; Kulagin, V. A.; Baranova, M. P.; Glushkov, D. O.

    2016-12-01

    Experimental research of conditions and characteristics of ignition of the pulverized coal (with a particle size of approximately 80 μm) of different-type brown coals (1B, 2B, and 3B) during convective heating by a heated airflow (at a temperature of 425-600°C and velocity of 1-5 m/s) is carried out. The use of low-inertia thermocouples, a high-speed video camera, and dedicated software has made it possible to determine the minimum oxidizer parameters needed for coal dust ignition, and the approximation dependences of a main characteristic of the process under study―ignition delay time―on the air temperature. Results of experimental studies provide a basis for developing an optimal scheme of the boiler startup without heavy oil, which differs from the known schemes by the relatively low energy consumption for fuel-burning initiation. By example of the BKZ 75-39FB boiler, the economic usefulness of applying the boiler startup without heavy oil is shown. This scheme can be implemented using the proposed ignition burner that functions as a part of the direct system of pulverized-fuel preparation.

  4. Yield and flow-induced phase transition in colloidal gels under startup shear

    NASA Astrophysics Data System (ADS)

    Johnson, Lilian; Landrum, Benjamin; Zia, Roseanna

    2016-11-01

    We study the micro-mechanical origins of the transition from solid-like to liquid-like behavior during flow startup of colloidal gels via large-scale dynamic simulation, with a view toward understanding connections to energy storage and phase transition. Such materials often exhibit an overshoot in stress, and prior studies of strong, dilute colloidal gels with a stringy microstructure connect this "yield" event to loss of network connectivity. Owing to the importance of Brownian transport in phase separation processes in colloids, here we study a reversible colloidal gel of hard spheres that interact via a short-range attraction of several kT, for which Brownian motion can lead to rapid quiescent coarsening. In the present study, we interrogate the shear stress for a range of imposed flow strengths, monitoring particle-level structure and dynamics, to determine the microscopic picture of gel yield. Our detailed studies of the microstructural evolution and macroscopic response during startup provide insight into the phase behavior during yield. We present a new model of stress development, phase transition, and structural evolution during transient yield in colloidal gels for which ongoing phase separation informs gel phenomenology.

  5. Lessons learned: design, start-up, and operation of cryogenic systems

    NASA Astrophysics Data System (ADS)

    Bell, W. M.; Bagley, R. E.; Motew, S.; Young, P.-W.

    2014-11-01

    Cryogenic systems involving a pumped cryogenic fluid, such as liquid nitrogen (LN2), require careful design since the cryogen is close to its boiling point and cold. At 1 atmosphere, LN2 boils at 77.4 K (-320.4 F). These systems, typically, are designed to transport the cryogen, use it for process heat removal, or for generation of gas (GN2) for process use. As the design progresses, it is important to consider all aspects of the design including, cryogen storage, pressure control and safety relief systems, thermodynamic conditions, equipment and instrument selection, materials, insulation, cooldown, pump start-up, maximum design and minimum flow rates, two phase flow conditions, heat flow, process control to meet and maintain operating conditions, piping integrity, piping loads on served equipment, warm-up, venting, and shut-down. "Cutting corners" in the design process can result in stalled start-ups, field rework, schedule hits, or operational restrictions. Some of these "lessoned learned" are described in this paper.

  6. Testing of a Loop Heat Pipe Subjective to Variable Accelerations. Part 1; Start-up

    NASA Technical Reports Server (NTRS)

    Ku, Jentung; Rogers, Paul; Hoff, Craig

    2000-01-01

    The effect of accelerating forces on the performance of loop heat pipes (LHP) is of interest and importance to terrestrial and space applications. They are being considered for cooling of military combat vehicles and for spinning spacecraft. In order to investigate the effect of an accelerating force on LHP operation, a miniature LHP was installed on a spin table. Variable accelerating forces were imposed on the LHP by spinning the table at different angular speeds. Several patterns of accelerating forces were applied, i.e. continuous spin at different speeds and periodic spin at different speeds and frequencies. The resulting accelerations ranged from 1.17 g's to 4.7 g's. This paper presents the first part of the experimental study, i.e. the effects of a centrifugal force on the LHP start-up. Tests were conducted by varying the heat load to the evaporator, sink temperature, magnitude and frequency of centrifugal force, and LHP orientation relative to the direction of the accelerating force. The accelerating force seems to have little effect on the loop start-up in terms of temperature overshoot and superheat at boiling incipience. Changes in these parameters seem to be stochastic with or without centrifugal accelerating forces. The LHP started successfully in all tests.

  7. Spectroscopic Measurement of Ion Flow During Merging Start-up of Field-Reversed Configuration

    NASA Astrophysics Data System (ADS)

    Oka, Hirotaka; Inomoto, Michiaki; Tanabe, Hiroshi; Annoura, Masanobu; Ono, Yasushi; Nemoto, Koshichi

    2012-10-01

    The counter-helicity merging method [1] of field-reversed configuration (FRC) formation involves generation of bidirectional toroidal flow, known as a ``sling-shot.'' In two fluids regime, reconnection process is strongly affected by the Hall effect [2]. In this study, we have investigated the behavior of toroidal bidirectional flow generated by the counter-helicity merging in two-fluids regime. We use 2D Ion Doppler Spectroscopy to mesure toroidal ion flow during merging start-up of FRC from Ar gas. We defined two cases: one case with a radially pushed-in X line (case I) and the other case with a radially pushed-out X line(case O). The flow during the plasma merging shows radial asymmetry, as expected from the magnetic measurement, but finally relaxes to a unidirectional flow in plasma current direction in both cases. We observed larger toroidal flow in the plasma current direction in case I after FRC is formed, though the FRC in case O has larger magnetic flux. These results suggest that more ions are lost during merging start-up in case I. This selective ion loss might account for stability and confinement of FRCs probably maintained by high energy ions.[4pt] [1] Y. Ono, et al., Nucl. Fusion 39, pp. 2001-2008 (1999).[0pt] [2] M. Inomoto, et al., Phys. Rev. Lett., 97, 135002, (2006)

  8. Optical studies of the flow start-up processes in four convergent-divergent nozzles

    NASA Astrophysics Data System (ADS)

    Opalka, Klaus O.

    1991-03-01

    In the context of design studies for the U.S. Large Blast/Thermal Simulator, BRL has sponsored optical studies of the flow start-up in convergent-divergent nozzles which have the flow-initiating diaphragm located in the nozzle throat. The experiments were performed in the 200 mm shock tube at the Ernst-Mach Institute in Freiburg (Breisgau), West-Germany. The scope of the studies included divergent nozzles with half cone angles of 6, 16, 45 and 90 deg tested at seven diaphragm pressure ratios ranging from 4 to 188 and resulting in shock strengths ranging from 1.4 to 4.4. Results were summarized in graphs of significant parameters, e.g., shock formation time, flow start-up period, flow expansion angle, and shock strength versus the driver pressure ratio and further compared with numerical results obtained with the BRL-Q1D hydrocode. The numerical-experimental comparison shows qualitative agreement. The flow phenomena are generally reproduced by the computations as long as they are not strongly dependent on viscous effects. The study shows that a pressure loss of 10 percent is connected to the presence of a large area discontinuity at the exit plane of the nozzle throat when no divergent nozzle is attached. Results suggest that a 45 deg divergent nozzle may present an acceptable compromise for minimizing these pressure losses by reducing the associated area discontinuities.

  9. Design of a data-driven predictive controller for start-up process of AMT vehicles.

    PubMed

    Lu, Xiaohui; Chen, Hong; Wang, Ping; Gao, Bingzhao

    2011-12-01

    In this paper, a data-driven predictive controller is designed for the start-up process of vehicles with automated manual transmissions (AMTs). It is obtained directly from the input-output data of a driveline simulation model constructed by the commercial software AMESim. In order to obtain offset-free control for the reference input, the predictor equation is gained with incremental inputs and outputs. Because of the physical characteristics, the input and output constraints are considered explicitly in the problem formulation. The contradictory requirements of less friction losses and less driveline shock are included in the objective function. The designed controller is tested under nominal conditions and changed conditions. The simulation results show that, during the start-up process, the AMT clutch with the proposed controller works very well, and the process meets the control objectives: fast clutch lockup time, small friction losses, and the preservation of driver comfort, i.e., smooth acceleration of the vehicle. At the same time, the closed-loop system has the ability to reject uncertainties, such as the vehicle mass and road grade.

  10. Activity-Based Costing Systems for Higher Education.

    ERIC Educational Resources Information Center

    Day, Dennis H.

    1993-01-01

    Examines traditional costing models utilized in higher education and pinpoints shortcomings related to proper identification of costs. Describes activity-based costing systems as a superior alternative for cost identification, measurement, and allocation. (MLF)

  11. An efficient start-up circuitry for de-energized ultra-low power energy harvesting systems

    NASA Astrophysics Data System (ADS)

    Hörmann, Leander B.; Berger, Achim; Salzburger, Lukas; Priller, Peter; Springer, Andreas

    2015-05-01

    Cyber-physical systems often include small wireless devices to measure physical quantities or control a technical process. These devices need a self-sufficient power supply because no wired infrastructure is available. Their operational time can be enhanced by energy harvesting systems. However, the convertible power is often limited and discontinuous which requires the need of an energy storage unit. If this unit (and thus the whole system) is de-energized, the start-up process may take a significant amount of time because of an inefficient energy harvesting process. Therefore, this paper presents a system which enables a safe and fast start-up from the de-energized state.

  12. Evaluation of the use of condensate filters up-stream of condensate polishers during start-up

    SciTech Connect

    Revere, A.; Ryan, J.

    1994-12-31

    Condensate clean-up is a necessity before light-off of a supercritical boiler. It is a rate-limiting step. Pacific Gas and Electric Company`s Pittsburg Power Plant installed a start-up condensate polishing filter before the condensate polishers containing eighty-five, forty-inch long, five micron absolute rated filter cartridges to remove corrosion products. The filter has consistently decreased the amount of suspended solids during circulation for clean-up and reduced start-up times by several hours.

  13. Fabric-based integrated energy devices for wearable activity monitors.

    PubMed

    Jung, Sungmook; Lee, Jongsu; Hyeon, Taeghwan; Lee, Minbaek; Kim, Dae-Hyeong

    2014-09-01

    A wearable fabric-based integrated power-supply system that generates energy triboelectrically using human activity and stores the generated energy in an integrated supercapacitor is developed. This system can be utilized as either a self-powered activity monitor or as a power supply for external wearable sensors. These demonstrations give new insights for the research of wearable electronics.

  14. Network-Based Business Simulation Activities in Technical Professional Education

    ERIC Educational Resources Information Center

    Vescoukis, Vassilios C.; Retalis, Symeon; Anagnostopoulos, Dimosthenis

    2003-01-01

    For a long time on-the-job training has been considered as the single point of contact of technical education with the real world job market. Indeed, traditional on-the-job training activities are of great educational value and complement uniquely any classroom-based learning activity. However, it has been observed that several obstacles arise…

  15. Connecting Children and Family with Nature-Based Physical Activity

    ERIC Educational Resources Information Center

    Flett, M. Ryan; Moore, Rebecca W.; Pfeiffer, Karin A.; Belonga, Joyce; Navarre, Julie

    2010-01-01

    Background: As the obesity epidemic expands to include younger Americans, there is greater need to understand youth experiences and to identify innovative strategies to promote physical activity in children and adolescents. Connecting children and families with nature-based activities is an example of a strategy that may promote physical activity…

  16. Activity-Based Costing: A Cost Management Tool.

    ERIC Educational Resources Information Center

    Turk, Frederick J.

    1993-01-01

    In college and university administration, overhead costs are often charged to programs indiscriminately, whereas the support activities that underlie those costs remain unanalyzed. It is time for institutions to decrease ineffective use of resources. Activity-based management attributes costs more accurately and can improve efficiency. (MSE)

  17. Project-Based Language Learning: An Activity Theory Analysis

    ERIC Educational Resources Information Center

    Gibbes, Marina; Carson, Lorna

    2014-01-01

    This paper reports on an investigation of project-based language learning (PBLL) in a university language programme. Learner reflections of project work were analysed through Activity Theory, where tool-mediated activity is understood as the central unit of analysis for human interaction. Data were categorised according to the components of human…

  18. Comprehensive School-Based Physical Activity Promotion: A Review

    ERIC Educational Resources Information Center

    Erwin, Heather; Beighle, Aaron; Carson, Russell L.; Castelli, Darla M.

    2013-01-01

    Physical activity (PA) participation levels among youth remain well below national recommendations. Thus, a variety of strategies to promote youth PA have been advocated, including multifaceted, school-based approaches. One identified as having great potential is a comprehensive school physical activity program (CSPAP). The goal of a CSPAP is to…

  19. Start-up and long-term operation of the Anammox process in a fixed bed reactor (FBR) filled with novel non-woven ring carriers.

    PubMed

    Wang, Tao; Zhang, Hanmin; Yang, Fenglin; Li, Yifei; Zhang, Guangyi

    2013-04-01

    A novel kind of non-woven ring carriers was used to improve a fixed bed reactor (FBR) as Anammox reactor. The improved FBR was operated for about 1 year. The Anammox activity occurred on day 39. On day 367, the maximum total nitrogen removal rate reached 9.2 kg Nm(-3)d(-1). FISH analysis showed that Anammox bacteria predominated in the mature sludge and accounted for 78% of the total bacteria. Phylogenetic analysis further showed that Candidatus Kuenenia stuttgartiensis occupied 70% of Anammox bacteria, which benefited keeping the stability of Anammox reactor. The FBR was proved to be a suitable reactor for start-up and long-term operation of Anammox process.

  20. CRAFFT: An Activity Prediction Model based on Bayesian Networks.

    PubMed

    Nazerfard, Ehsan; Cook, Diane J

    2015-04-01

    Recent advances in the areas of pervasive computing, data mining, and machine learning offer unique opportunities to provide health monitoring and assistance for individuals facing difficulties to live independently in their homes. Several components have to work together to provide health monitoring for smart home residents including, but not limited to, activity recognition, activity discovery, activity prediction, and prompting system. Compared to the significant research done to discover and recognize activities, less attention has been given to predict the future activities that the resident is likely to perform. Activity prediction components can play a major role in design of a smart home. For instance, by taking advantage of an activity prediction module, a smart home can learn context-aware rules to prompt individuals to initiate important activities. In this paper, we propose an activity prediction model using Bayesian networks together with a novel two-step inference process to predict both the next activity features and the next activity label. We also propose an approach to predict the start time of the next activity which is based on modeling the relative start time of the predicted activity using the continuous normal distribution and outlier detection. To validate our proposed models, we used real data collected from physical smart environments.

  1. Human activity recognition based on Evolving Fuzzy Systems.

    PubMed

    Iglesias, Jose Antonio; Angelov, Plamen; Ledezma, Agapito; Sanchis, Araceli

    2010-10-01

    Environments equipped with intelligent sensors can be of much help if they can recognize the actions or activities of their users. If this activity recognition is done automatically, it can be very useful for different tasks such as future action prediction, remote health monitoring, or interventions. Although there are several approaches for recognizing activities, most of them do not consider the changes in how a human performs a specific activity. We present an automated approach to recognize daily activities from the sensor readings of an intelligent home environment. However, as the way to perform an activity is usually not fixed but it changes and evolves, we propose an activity recognition method based on Evolving Fuzzy Systems.

  2. An Active Learning Exercise for Introducing Agent-Based Modeling

    ERIC Educational Resources Information Center

    Pinder, Jonathan P.

    2013-01-01

    Recent developments in agent-based modeling as a method of systems analysis and optimization indicate that students in business analytics need an introduction to the terminology, concepts, and framework of agent-based modeling. This article presents an active learning exercise for MBA students in business analytics that demonstrates agent-based…

  3. Racial Differences in Congregation-Based Political Activism

    ERIC Educational Resources Information Center

    Brown, R. Khari

    2006-01-01

    This study employs a resource mobilization model to explain racial differences in congregation-based political activism. The fewer resources (i.e., members, income, clergy leadership, civic ties) that black congregations possess relative to white congregations largely accounts for racial differences in congregation-based lobbying and protest…

  4. Lunar bases and space activities of the 21st century

    NASA Technical Reports Server (NTRS)

    Mendell, W. W. (Editor)

    1985-01-01

    The present conference gives attention to such major aspects of lunar colonization as lunar base concepts, lunar transportation, lunar science research activities, moon-based astronomical researches, lunar architectural construction, lunar materials and processes, lunar oxygen production, life support and health maintenance in lunar bases, societal aspects of lunar colonization, and the prospects for Mars colonization. Specific discussions are presented concerning the role of nuclear energy in lunar development, achromatic trajectories and the industrial scale transport of lunar resources, advanced geologic exploration from a lunar base, geophysical investigations of the moon, moon-based astronomical interferometry, the irradiation of the moon by particles, cement-based composites for lunar base construction, electrostatic concentration of lunar soil minerals, microwave processing of lunar materials, a parametric analysis of lunar oxygen production, hydrogen from lunar regolith fines, metabolic support for a lunar base, past and future Soviet lunar exploration, and the use of the moons of Mars as sources of water for lunar bases.

  5. [Evidence-based guidelines for physical activity of adult Canadians].

    PubMed

    Warburton, Darren E R; Katzmarzyk, Peter T; Rhodes, Ryan E; Shephard, Roy J

    2007-01-01

    This review of the literature provides an update on the scientific biological and psychosocial bases for Canada's Physical Activity Guide for Health Active Living, with particular reference to the effect of physical activity on the health of adults aged 20-55 years. Existing physical activity guidelines for adults from around the world are summarized briefly and compared to the Canadian guidelines. The descriptive epidemiology of physical activity and inactivity in Canada is presented, and the strength of the relationship between physical activity and specific health outcomes is evaluated, with particular emphasis on minimal and optimal physical activity requirements. Finally, areas requiring further investigation are highlighted. Summarizing the findings, Canadian and most international physical activity guidelines advocate moderate-intensity physical activity on most days of the week. Physical activity appears to reduce the risk for over 25 chronic conditions, in particular coronary heart disease, stroke, hypertension, breast cancer, colon cancer, type 2 diabetes, and osteoporosis. Current literature suggests that if the entire Canadian population followed current physical activity guidelines, approximately one-third of deaths related to coronary heart disease, one quarter of deaths related to stroke and osteoporosis, 20% of deaths related to colon cancer, hypertension, and type 2 diabetes, and 14% of deaths related to breast cancer could be prevented. It also appears that the prevention of weight gain and the maintenance of weight loss require greater physical activity levels than current recommendations.

  6. Active Oxidation of a UHTC-Based CMC

    NASA Technical Reports Server (NTRS)

    Glass, David E.; Splinter, Scott C.

    2012-01-01

    The active oxidation of ceramic matrix composites (CMC) is a severe problem that must be avoided for multi-use hypersonic vehicles. Much work has been performed studying the active oxidation of silicon-based CMCs such as C/SiC and SiC-coated carbon/carbon (C/C). Ultra high temperature ceramics (UTHC) have been proposed as a possible material solution for high-temperature applications on hypersonic vehicles. However, little work has been performed studying the active oxidation of UHTCs. The intent of this paper is to present test data indicating an active oxidation process for a UHTC-based CMC similar to the active oxidation observed with Si-based CMCs. A UHTC-based CMC was tested in the HyMETS arc-jet facility (or plasma wind tunnel, PWT) at NASA Langley Research Center, Hampton, VA. The coupon was tested at a nominal surface temperature of 3000 F (1650 C), with a stagnation pressure of 0.026 atm. A sudden and large increase in surface temperature was noticed with negligible increase in the heat flux, indicative of the onset of active oxidation. It is shown that the surface conditions, both temperature and pressure, fall within the region for a passive to active transition (PAT) of the oxidation.

  7. Activity-based intervention in motor skill development.

    PubMed

    Apache, R R Goyakla

    2005-06-01

    This study assessed the effectiveness of an activity-based intervention program and a direct instruction program for preschool children with disabilities. Two groups of preschool students (average age=4.1 yr.), classified as having developmental delays or at risk for such delays, were selected. They were provided 15 weeks of physical education through activity-based intervention and 15 weeks of physical education by direct instruction. Instruction was provided three times a week for 30-min. each session. In the fall semester the morning group received physical education through activity-based intervention, while the afternoon group received physical education through direct instruction. In the spring semester delivery of instruction was reversed for each group. The curriculum and activities provided to each group were identical with only the instructional delivery format altered. Two sets of pre- and post-tests using the Test of Gross Motor Development were administered before and after each 15-wk. instructional period. Group improvement in skills was compared between instructional methods. Significant improvement in both locomotor and object control skills through the activity-based intervention was found compared to direct instruction. Activity-based intervention was shown to be easily adapted to a naturalistic educational setting befitting that of preschool education.

  8. Active media for tunable lasers based on hybrid polymers

    SciTech Connect

    Kopylova, T N; Eremina, N S; Vaitulevich, E A; Samsonova, L G; Maier, G V; Tel'minov, E N; Solodova, T A; Solodov, A M

    2008-02-28

    The lasing properties of rhodamine 6G (chloride and perchlorate) in synthesised hybrid polymers based on an organic polymer (methyl methacrylate with hydroxyethyl methacrylate) and an inorganic precursor (tetraethoxysilane) are studied. Rhodamine 6G samples were transversely pumped by the second harmonic of a Nd{sup 3+}:YAG laser. It is found that the active media based on hybrid polymers have a considerably longer service life compared to the active media based on organic polymers. The structure of the hybrid polymer is studied by the methods of IR Fourier spectroscopy, X-ray diffraction, and thermogravimetry. It is shown that the longer service life of hybrid-polymer active media is explained by the formation of an inorganic nanostructure network in them, which improves the thermooptic properties of the material and reduces the efficiency of thermal decomposition of active molecules. (lasers. amplifiers)

  9. Divided attention interferes with fulfilling activity-based intentions.

    PubMed

    Brewer, Gene A; Ball, B Hunter; Knight, Justin B; Dewitt, Michael R; Marsh, Richard L

    2011-09-01

    Two experiments were conducted to examine the effects of divided attention on activity-based prospective memory. After establishing a goal to fulfill an intention upon completion of an ongoing activity, successful completion of the intention generally suffered when attention was being devoted to an additional task (Experiment 1). Forming an implementation intention at encoding ameliorated the negative effects of divided attention (Experiment 2). The results from the present experiments demonstrate that activity-based prospective memory is susceptible to distraction and that implementing encoding strategies that enhance prospective memory performance can reduce this interference. The current work raises interesting questions about the similarities and differences between event- and activity-based prospective memories.

  10. Grain-based activated carbons for natural gas storage.

    PubMed

    Zhang, Tengyan; Walawender, Walter P; Fan, L T

    2010-03-01

    Natural gas has emerged as a potential alternative to gasoline due to the increase in global energy demand and environmental concerns. An investigation was undertaken to explore the technical feasibility of implementing the adsorbed natural gas (ANG) storage in the fuel tanks of motor vehicles with activated carbons from biomass, e.g., sorghum and wheat. The grain-based activated carbons were prepared by chemical activation; the experimental parameters were varied to identify the optimum conditions. The porosity of the resultant activated carbons was evaluated through nitrogen adsorption; and the storage capacity, through methane adsorption. A comparative study was also carried out with commercial activated carbons from charcoal. The highest storage factor attained was 89 for compacted grain-based activated carbons from grain sorghum with a bulk density of 0.65 g/cm(3), and the highest storage factor attained is 106 for compacted commercial activated carbons (Calgon) with a bulk density of 0.70 g/cm(3). The storage factor was found to increase approximately linearly with increasing bulk density and to be independent of the extent of compaction. This implies that the grain-based activated carbons are the ideal candidates for the ANG storage.

  11. alpha-MSH enhances activity-based anorexia.

    PubMed

    Hillebrand, Jacquelien J G; Kas, Martien J H; Adan, Roger A H

    2005-10-01

    Activity-based anorexia (ABA) is considered an animal model of anorexia nervosa (AN). In ABA, scheduled feeding in combination with voluntary access to running wheels, results in hyperactivity, hypophagia, body weight loss and activation of the HPA axis. Since stimulation of the melanocortin (MC) system has similar effects, this system is a candidate system involved in ABA. Here it is shown that chronic alpha-MSH treatment enhances ABA by increasing running wheel activity (RWA), decreasing food intake and increasing HPA axis activation.

  12. Activity-based probes for detection of active MALT1 paracaspase in immune cells and lymphomas.

    PubMed

    Eitelhuber, Andrea C; Vosyka, Oliver; Nagel, Daniel; Bognar, Miriam; Lenze, Dido; Lammens, Katja; Schlauderer, Florian; Hlahla, Daniela; Hopfner, Karl-Peter; Lenz, Georg; Hummel, Michael; Verhelst, Steven H L; Krappmann, Daniel

    2015-01-22

    MALT1 paracaspase is activated upon antigen receptor stimulation to promote lymphocyte activation. In addition, deregulated MALT1 protease activity drives survival of distinct lymphomas such as the activated B cell type of diffuse large B cell lymphoma (ABC-DLBCL). Here, we designed fluorophore or biotin-coupled activity based-probes (ABP) that covalently modify the active center of MALT1. MALT1-ABPs are exclusively labeling an active modified full length form of MALT1 upon T cell stimulation. Further, despite the CARMA1 requirement for initial MALT1 activation, the MALT1-ABPs show that protease activity is not confined to the high-molecular CARMA1-BCL10-MALT1 (CBM) complex. Using biotin-coupled ABPs, we developed a robust assay for sensitive and selective detection of active MALT1 in cell lines, primary lymphocytes, and DLBCL tumor biopsies. Taken together, MALT1-ABPs represent powerful chemical tools to measure cellular MALT1 activation, determine efficacy of small molecule inhibitors, and classify lymphomas based on MALT1 activity status.

  13. Start-up of a spiral periphyton bioreactor (SPR) for removal of COD and the characteristics of the associated microbial community.

    PubMed

    Shangguan, Haidong; Liu, Junzhuo; Zhu, Yan; Tong, Zhengong; Wu, Yonghong

    2015-10-01

    Periphyton-based bioreactors are widely accepted for removing various pollutants from wastewater; however, the slow start-up and low efficiency in widely fluctuating temperatures limit its application. A spiral periphyton bioreactor (SPR) was developed and its COD removal capability and the associated microbial communities were investigated. This SPR can be easily backwashed to stimulate periphyton growth and efficiently remove COD at temperatures ranging from 4 to 30 °C. The species richness and evenness of the periphyton community increased during domestication, while its functional diversity and organic carbon metabolic vitality were higher after 30 days domestication. Cyanobacteria were the main components of the SPR and produced an aerobic environment, while Alphaproteobacteria, Betaproteobacteria, Gammaproteobacteria and Sphingobacteria were the microorganisms responsible for COD removal. This study provides valuable insights into changes in pivotal microorganisms of the periphyton community during domestication, and indicates that SPR is simple to operate and efficient in COD removal.

  14. Free-run Startup Techniques for Sensorless Drive Systems of Permanent Magnet Machine with Phase Current or DC-bus Current Detection

    NASA Astrophysics Data System (ADS)

    Toba, Akio; Sato, Michihiko-; Inatama, Shigeki; Fujita, Kouetsu

    Starting methods for the inverter that drives a permanent magnet machine with only current sensors, while the rotor is rotating, (“free-run startup techniques") are proposed. The proposed methods are based on whether current flows or does not when one switch of the inverter is turned on, which depends on the electrical angle of the emf and the reverse blocking function of the freewheeling diodes. The merit of the proposed methods is that the calculation to determine the rotor position is simple. The variety of the methods is with the types of current detection. Proposed are the methods not only for the phase current detection but also for the DC-bus line current detection that are utilized in low-cost drive systems. Theoretical analysis, design issues, and experimental verifications of the proposed methods are set forth.

  15. Is a Perceived Activity-Friendly Environment Associated with More Physical Activity and Fewer Screen-Based Activities in Adolescents?

    PubMed Central

    Kopcakova, Jaroslava; Dankulincova Veselska, Zuzana; Madarasova Geckova, Andrea; Bucksch, Jens; Nalecz, Hanna; Sigmundova, Dagmar; van Dijk, Jitse P.; Reijneveld, Sijmen A.

    2017-01-01

    Background: The aim of this study is to explore if perception of an activity-friendly environment is associated with more physical activity and fewer screen-based activities among adolescents. Methods: We collected self-reported data in 2014 via the Health Behavior in School-aged Children cross-sectional study from four European countries (n = 13,800, mean age = 14.4, 49.4% boys). We explored the association of perceived environment (e.g., “There are other children nearby home to go out and play with”) with physical activity and screen-based activities using a binary logistic regression model adjusted for age, gender, family affluence and country. Results: An environment perceived as activity-friendly was associated with higher odds that adolescents meet recommendations for physical activity (odds ratio (OR) for one standard deviation (SD) change = 1.11, 95% confidence interval (CI) 1.05–1.18) and lower odds for excessive screen-based activities (OR for 1 SD better = 0.93, 95% CI 0.88–0.98). Conclusions: Investment into an activity-friendly environment may support the promotion of active life styles in adolescence. PMID:28054953

  16. Is a Perceived Activity-Friendly Environment Associated with More Physical Activity and Fewer Screen-Based Activities in Adolescents?

    PubMed

    Kopcakova, Jaroslava; Dankulincova Veselska, Zuzana; Madarasova Geckova, Andrea; Bucksch, Jens; Nalecz, Hanna; Sigmundova, Dagmar; van Dijk, Jitse P; Reijneveld, Sijmen A

    2017-01-03

    Background: The aim of this study is to explore if perception of an activity-friendly environment is associated with more physical activity and fewer screen-based activities among adolescents. Methods: We collected self-reported data in 2014 via the Health Behavior in School-aged Children cross-sectional study from four European countries (n = 13,800, mean age = 14.4, 49.4% boys). We explored the association of perceived environment (e.g., "There are other children nearby home to go out and play with") with physical activity and screen-based activities using a binary logistic regression model adjusted for age, gender, family affluence and country. Results: An environment perceived as activity-friendly was associated with higher odds that adolescents meet recommendations for physical activity (odds ratio (OR) for one standard deviation (SD) change = 1.11, 95% confidence interval (CI) 1.05-1.18) and lower odds for excessive screen-based activities (OR for 1 SD better = 0.93, 95% CI 0.88-0.98). Conclusions: Investment into an activity-friendly environment may support the promotion of active life styles in adolescence.

  17. EC assisted start-up experiments reproduction in FTU and AUG for simulations of the ITER case

    SciTech Connect

    Granucci, G.; Ricci, D.; Farina, D.; Figini, L.; Cavinato, M.; Stober, J.; Tudisco, O.

    2014-02-12

    The breakdown and plasma start-up in ITER are well known issues studied in the last few years in many tokamaks with the aid of calculation based on simplified modeling. The thickness of ITER metallic wall and the voltage limits of the Central Solenoid Power Supply strongly limit the maximum toroidal electric field achievable (0.3 V/m), well below the level used in the present generation of tokamaks. In order to have a safe and robust breakdown, the use of Electron Cyclotron Power to assist plasma formation and current rump up has been foreseen. This has raised attention on plasma formation phase in presence of EC wave, especially in order to predict the required power for a robust breakdown in ITER. Few detailed theory studies have been performed up to nowadays, due to the complexity of the problems. A simplified approach, extended from that proposed in ref[1] has been developed including a impurity multispecies distribution and an EC wave propagation and absorption based on GRAY code. This integrated model (BK0D) has been benchmarked on ohmic and EC assisted experiments on FTU and AUG, finding the key aspects for a good reproduction of data. On the basis of this, the simulation has been devoted to understand the best configuration for ITER case. The dependency of impurity distribution content and neutral gas pressure limits has been considered. As results of the analysis a reasonable amount of power (1 - 2 MW) seems to be enough to extend in a significant way the breakdown and current start up capability of ITER. The work reports the FTU data reproduction and the ITER case simulations.

  18. Context Matters: Systematic Observation of Place-Based Physical Activity.

    PubMed

    McKenzie, Thomas L

    2016-12-01

    Physical activity is place-based, and being able to assess the number of people and their characteristics in specific locations is important both for public health surveillance and for practitioners in their design of physical activity spaces and programs. Although physical activity measurement has improved recently, many investigators avoid or are at a loss regarding the assessment of physical activity in explicit locations, especially in open environments where many people come and go in a seemingly indiscriminate fashion. Direct, systematic observation exceeds other methods in simultaneously assessing physical activity and the contexts in which it occurs. This commentary summarizes the development and use of 2 validated observation tools: the System for Observing Play and Leisure in Youth (SOPLAY) and System for Observing Play and Active Recreation in Communities (SOPARC). Their use is well supported by both behavior-analytic principles and social-ecological theory, and their methods have utility for both researchers and practitioners.

  19. E-Activities: Internet-based Activities To Expand Your History Curriculum.

    ERIC Educational Resources Information Center

    Trumbauer, Lisa

    2002-01-01

    Presents three Internet-based activities for teaching elementary students about the Underground Railroad. The activities include creating a freight-train of facts about the Underground Railroad, mapping the routes of the Underground Railroad, and participating in an electronic simulation of life as a fugitive slave. (SM)

  20. 40 CFR 60.5180 - Do the emission limits, emission standards, and operating limits apply during periods of startup...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... less than the sewage sludge incineration residence time). For determining compliance with the CO concentration limit using CO CEMS, the correction to 7 percent oxygen does not apply during periods of startup or shutdown. Use the measured CO concentration without correcting for oxygen concentration...

  1. 40 CFR 60.5180 - Do the emission limits, emission standards, and operating limits apply during periods of startup...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... less than the sewage sludge incineration residence time). For determining compliance with the CO concentration limit using CO CEMS, the correction to 7 percent oxygen does not apply during periods of startup or shutdown. Use the measured CO concentration without correcting for oxygen concentration...

  2. 40 CFR 60.5180 - Do the emission limits, emission standards, and operating limits apply during periods of startup...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... less than the sewage sludge incineration residence time). For determining compliance with the CO concentration limit using CO CEMS, the correction to 7 percent oxygen does not apply during periods of startup or shutdown. Use the measured CO concentration without correcting for oxygen concentration...

  3. 78 FR 46593 - Prospective Grant of Start-up Exclusive License: Kits for the Detection of Human Interferon-Alpha...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-01

    ...-2008/0), titled ``Compositions for Detecting Human Interferon- Alpha Subtypes and Methods of Use'', to... HUMAN SERVICES National Institutes of Health Prospective Grant of Start-up Exclusive License: Kits for the Detection of Human Interferon-Alpha Subtypes and Allotypes AGENCY: National Institutes of...

  4. Recycled paper mill effluent treatment in a modified anaerobic baffled reactor: start-up and steady-state performance.

    PubMed

    Hassana, Siti Roshayu; Zwaina, Haider M; Zamana, Nastaein Qamaruz; Dahlanb, Irvan

    2014-01-01

    Start-up period is considered to be the most unstable and difficult stage in anaerobic process and usually takes a long time due to slow-degree adaptation of anaerobic microorganisms. In order to achieve a shorter start-up period, a novel modified anaerobic baffled reactor (MABR) has been developed in this study, where each modified baffle has its own characteristics (form/shape) to facilitate a treatment ofrecycled paper mill effluent (RPME). The results ofphysico-chemical characteristics showed that effluent from recycled paper mill consisted of 4328mgL-1 chemical oxygen demand (COD), 669mg L-1 biochemical oxygen demand and 501mg L-1 volatile fatty acid. It also consisted of variety of heavy metals such as zinc, magnesium, iron and nickel at concentrations of 1.39, 12.19, 2.39 and 0.72 mgL-1, respectively. Performance of MABR during the start-up period showed that methane production reached 34.7% with COD removal of 85% at steady state. The result indicates that MABR was successfully operated during the start-up period in treating RPME within a period of less than 30 days.

  5. 78 FR 34664 - Prospective Grant of Start-up Exclusive Evaluation License: Portable Device and Method for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-10

    ... 15, 2012, to ArcheOptix, having its principle place of business in Kingston, Ontario (Canada). The United States of America is an assignee to the patent rights of these inventions. The contemplated... termination of the start-up exclusive evaluation license, ArcheOptix will have the right to execute a...

  6. 40 CFR 60.5180 - Do the emission limits, emission standards, and operating limits apply during periods of startup...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... less than the sewage sludge incineration residence time). For determining compliance with the CO concentration limit using CO CEMS, the correction to 7 percent oxygen does not apply during periods of startup or shutdown. Use the measured CO concentration without correcting for oxygen concentration...

  7. Intricacies and strategies for the implementation of new technologies in radiotherapy: Experience in the startup of a radiosurgery service

    NASA Astrophysics Data System (ADS)

    Franco-Cabrera, M. C.; Espejo-Villalobos, J. D.; Estrada-Hernandez, C.; Quintero-Castelan, M. S.

    2012-10-01

    We discuss the intricacies that Radiotherapy physicists in Mexico face in a technology upgrade process, and propose strategies to approach them. The phases from specification to clinical startup are addressed emphasizing collegiate quality assurance (QA), and patient safety. As context we discuss our experience implementing a radiosurgery service in a Mexican Hospital.

  8. 30 CFR 250.1917 - What criteria for pre-startup review must be in my SEMS program?

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 2 2013-07-01 2013-07-01 false What criteria for pre-startup review must be in my SEMS program? 250.1917 Section 250.1917 Mineral Resources BUREAU OF SAFETY AND ENVIRONMENTAL... analysis recommendations have been implemented as appropriate. (e) Training of operating personnel has...

  9. 30 CFR 250.1917 - What criteria for pre-startup review must be in my SEMS program?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 2 2012-07-01 2012-07-01 false What criteria for pre-startup review must be in my SEMS program? 250.1917 Section 250.1917 Mineral Resources BUREAU OF SAFETY AND ENVIRONMENTAL... analysis recommendations have been implemented as appropriate. (e) Training of operating personnel has...

  10. 30 CFR 250.1917 - What criteria for pre-startup review must be in my SEMS program?

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 2 2014-07-01 2014-07-01 false What criteria for pre-startup review must be in my SEMS program? 250.1917 Section 250.1917 Mineral Resources BUREAU OF SAFETY AND ENVIRONMENTAL... analysis recommendations have been implemented as appropriate. (e) Training of operating personnel has...

  11. Start-up and operation strategies on the liquefied food waste anaerobic digestion and a full-scale case application.

    PubMed

    Meng, Ying; Shen, Fei; Yuan, Hairong; Zou, Dexun; Liu, Yanping; Zhu, Baoning; Chufo, Akiber; Jaffar, Muhammad; Li, Xiujin

    2014-11-01

    Batch anaerobic digestion was employed to investigate the efficient start-up strategies for the liquefied food waste, and sequencing batch digestion was also performed to determine maximum influent organic loading rate (OLR) for efficient and stable operation. The results indicated that the start-up could be well improved using appropriate wastewater organic load and food-to-microorganism ratios (F/M). When digestion was initialized at low chemical oxygen demand (COD) concentration of 20.0 gCOD L(-1), the start-up would go well using lower F/M ratio of 0.5-0.7. The OLR 7.0 gCOD L(-1) day(-1) was recommended for operating the ASBR digestion, in which the COD conversion of 96.7 ± 0.53% and biomethane yield of 3.5 ± 0.2 L gCOD(-1) were achieved, respectively. The instability would occur when OLR was higher than 7.0 gCOD L(-1) day(-1), and this instability was not recoverable. Lipid was suggested to be removed before anaerobic digestion. The anaerobic digestion process in engineering project ran well, and good performance was achieved when the start-up and operational strategies from laboratory study were applied. For case application, stable digestion performance was achieved in a digester (850 m(3) volume) with biogas production of 1.0-3.8 m(3) m(-3) day(-1).

  12. Stress buildup under start-up shear flows in self-assembled transient networks of telechelic associating polymers.

    PubMed

    Koga, Tsuyoshi; Tanaka, Fumihiko; Kaneda, Isamu; Winnik, Françoise M

    2009-08-04

    The nonaffine transient network theory is used to study the time development of the shear and normal stresses under start-up shear flows in networks formed by self-assembled telechelic, hydrophobically modified water-soluble polymers. The initial slope, strain hardening, and overshoot of the shear stress are studied in detail in relation to the nonlinear tension-elongation curve of the elastically active chains in the network. The condition for the occurrence of strain hardening (upward deviation of the stress from the reference curve defined by the linear moduli) is found to be gamma > gammac(A), where gamma is the shear rate, gamma(c) is its critical value for strain hardening, and A is the amplitude of the nonlinear term in the tension of a chain. The critical shear rate gamma(c) is calculated as a function of A. It is approximately 6.3 (in the time unit of the reciprocal thermal dissociation rate) for a nonlinear chain with A = 10. The overshoot time t(max) when the stress reaches a maximum and the total deformation gamma(max) = gamma(t max) accumulated before the peak time are obtained in terms of the molecular parameters of the polymer chain. The maximum deformation gamma(max) turns out to depend weakly upon the shear rate gamma. The first and second normal stress differences are also studied on the basis of the exact numerical integration of the theoretical model by paying special attention to their overshoot, undershoot, and sign change as a function of the shear rate. These theoretical results are compared with recent rheological experiments of the solutions of telechelic hydrophobically modified poly(ethylene oxide)s carrying short branched alkyl chains (2-decyl-tetradecyl) at both ends.

  13. Synchronous rapid start-up of the methanation and anammox processes in two-stage ASBRs

    NASA Astrophysics Data System (ADS)

    Duan, Y.; Li, W. R.; Zhao, Y.

    2017-01-01

    The “methanation + anaerobic ammonia oxidation autotrophic denitrification” method was adopted by using anaerobic sequencing batch reactors (ASBRs) and realized a satisfactory synchronous removal of chemical oxygen demand (COD) and ammonia-nitrogen (NH4 +-N) in wastewater after 75 days operation. 90% of COD was removed at a COD load of 1.2 kg/(m3•d) and 90% of TN was removed at a TN load of 0.14 kg/(m3•d). The anammox reaction ratio was estimated to be 1: 1.32: 0.26. The results showed that synchronous rapid start-up of the methanation and anaerobic ammonia oxidation processes in two-stage ASBRs was feasible.

  14. Development of an orphan drug by a start-up company. MetroGel for rosacea.

    PubMed

    Borgman, R J

    1992-01-01

    The Orphan Drug Act of 1983, along with the discovery of a new use for a known drug and an investor willing to assume the necessary risk, brought about the formation of a start-up pharmaceutical company. The primary incentive of the Orphan Drug Act of seven years of marketing exclusivity provided the protection from competition necessary for recovery of the significant research and development and marketing costs. The orphan product, MetroGel, for the treatment of rosacea, required approximately five years of development before it was approved for marketing by the Food and Drug Administration. MetroGel has become the number one drug in the United States for the treatment of rosacea. It currently is marketed in other countries through a licensing agreement with a major pharmaceutical company.

  15. Microwave system performance for a solar power satellite during startup/shutdown operations

    NASA Technical Reports Server (NTRS)

    Arndt, G. D.; Berlin, L. A.

    1979-01-01

    The paper investigates the system performance and antenna characteristics under startup/shutdown conditions for the high power beam from a solar power satellite. Attention is given to the present microwave system reference configuration together with the dc power distribution system in the solar array and in the antenna. The pattern characteristics for the main beam, sidelobes, and grating lobes are examined for eight types of energizing configurations which include: random sequences, two types of concentric circles, and three types of line strips. In conclusion, it is noted that a proper choice of sequences should not cause environmental problems due to increased microwave radiation levels during the short time periods of energizing and de-energizing the antenna.

  16. ITER ECH launcher options for start-up assist, bulk heating, and EC current drive experiments

    SciTech Connect

    Bigelow, T.S.

    1994-03-01

    Electron Cyclotron Heating (ECH) is proposed for providing plasma start-up, bulk heating, current drive, and other applications on the International Tokamak Experimental Reactor (ITER) project. The requirements for ECH power launching systems for ITER have been investigated, and several possible configurations that have been devised are described in this report. The proposed launcher designs use oversized circular corrugated waveguides that make small penetrations through the blanket modules and radiate into the plasma. The criteria used for the design calls for minimum blanket penetration area, maximum reliability, and optimum launched beam quality. The effects of the harsh plasma edge environment on the launcher are discussed. Power generation systems, windows, and other components of the ECH systems are also investigated. The designs presented are believed to be capable of operating reliably and are relatively easy to maintain remotely.

  17. Monitoring the startup of a wet detention pond equipped with sand filters and sorption filters.

    PubMed

    Vollertsen, J; Lange, K H; Pedersen, J; Hallager, P; Bruus, A; Laustsen, A; Bundesen, V W; Brix, H; Nielsen, A H; Nielsen, N H; Wium-Andersen, T; Hvitved-Jacobsen, T

    2009-01-01

    The startup of a wet retention pond designed for extended stormwater treatment was monitored by more than one year of continual measurement of hydraulic parameters, nutrients and quality parameters in the pond itself (pH, temperature, dissolved oxygen, turbidity). The data revealed that photosynthesis played an important role for dissolved oxygen and pH for most of the year. Another important observation was that the pond behaved more like a completely mixed reactor than like a plug flow reactor--even though the length to width ratio was as high as 4.5:1. The pond was equipped with sand filters and sorption filters whereby very good nutrient removal efficiencies were achieved.

  18. Automated operator procedure prompting for startup of Experimental Breeder Reactor-2

    SciTech Connect

    Renshaw, A.W.; Ball, S.J.; Ford, C.E.

    1990-11-01

    This report describes the development of an operator procedure prompting aid for startup of a nuclear reactor. This operator aid is a preliminary design for a similar aid that eventually will be used with the Advanced Liquid Metal Reactor (ALMR) presently in the design stage. Two approaches were used to develop this operator procedure prompting aid. One method uses an expert system software shell, and the other method uses database software. The preliminary requirements strongly pointed toward features traditionally associated with both database and expert systems software. Database software usually provides data manipulation flexibility and user interface tools, and expert systems tools offer sophisticated data representation and reasoning capabilities. Both methods, including software and associated hardware, are described in this report. Proposals for future enhancements to improve the expert system approach to procedure prompting and for developing other operator aids are also offered. 25 refs., 14 figs.

  19. Low electric field ? plasma-current start-up in JT-60U

    NASA Astrophysics Data System (ADS)

    Yoshino, R.; Seki, M.

    1997-01-01

    Plasma breakdown for an electric field of 0741-3335/39/1/012/img2 (loop voltage of 1.7 V) was demonstrated in JT-60U using helium prefilling gas and LHRF heating. Runaway electrons were not generated even for the low prefilling pressure of 0741-3335/39/1/012/img3 required for plasma breakdown at low loop voltage. Preionization was not obtained by LHRF heating, but the time taken to pass the radiation barrier was significantly shortened and a subsequent plasma-current ramp-up at a plasma current of < 30 kA was successfully obtained. As a result, a plasma-current start-up of 0741-3335/39/1/012/img4 with a loop voltage of 0741-3335/39/1/012/img5 was demonstrated when the plasma current was 35 kA to 1 MA.

  20. Waste acceptance and the DWPF Startup Test Program: Impacts of process changes

    SciTech Connect

    Plodinec, M.J.

    1992-08-24

    The DWPF is currently carrying out a Startup Test Program which will lead to radioactive operations in the facility. The objective of a significant portion of this program is to demonstrate that the DWPF can reliably make glass which satisfies DOE`s product specifications. This objective will be achieved through a series of integrated process campaigns using feeds of various compositions (the Qualification Runs).2 During these campaigns, the DWPF Glass Product Control Programs (GPCP) will be used to ensure that glass is made which meets specifications. The GPCP uses a correlation between glass composition and leach test results to determine whether a particular batch of feed will make acceptable glass (i.e., glass which will meet the specifications).

  1. Waste acceptance and the DWPF Startup Test Program: Impacts of process changes

    SciTech Connect

    Plodinec, M.J.

    1992-08-24

    The DWPF is currently carrying out a Startup Test Program which will lead to radioactive operations in the facility. The objective of a significant portion of this program is to demonstrate that the DWPF can reliably make glass which satisfies DOE's product specifications. This objective will be achieved through a series of integrated process campaigns using feeds of various compositions (the Qualification Runs).2 During these campaigns, the DWPF Glass Product Control Programs (GPCP) will be used to ensure that glass is made which meets specifications. The GPCP uses a correlation between glass composition and leach test results to determine whether a particular batch of feed will make acceptable glass (i.e., glass which will meet the specifications).

  2. Substrate-Competitive Activity-Based Profiling of Ester Prodrug Activating Enzymes.

    PubMed

    Xu, Hao; Majmudar, Jaimeen D; Davda, Dahvid; Ghanakota, Phani; Kim, Ki H; Carlson, Heather A; Showalter, Hollis D; Martin, Brent R; Amidon, Gordon L

    2015-09-08

    Understanding the mechanistic basis of prodrug delivery and activation is critical for establishing species-specific prodrug sensitivities necessary for evaluating preclinical animal models and potential drug-drug interactions. Despite significant adoption of prodrug methodologies for enhanced pharmacokinetics, functional annotation of prodrug activating enzymes is laborious and often unaddressed. Activity-based protein profiling (ABPP) describes an emerging chemoproteomic approach to assay active site occupancy within a mechanistically similar enzyme class in native proteomes. The serine hydrolase enzyme family is broadly reactive with reporter-linked fluorophosphonates, which have shown to provide a mechanism-based covalent labeling strategy to assay the activation state and active site occupancy of cellular serine amidases, esterases, and thioesterases. Here we describe a modified ABPP approach using direct substrate competition to identify activating enzymes for an ethyl ester prodrug, the influenza neuraminidase inhibitor oseltamivir. Substrate-competitive ABPP analysis identified carboxylesterase 1 (CES1) as an oseltamivir-activating enzyme in intestinal cell homogenates. Saturating concentrations of oseltamivir lead to a four-fold reduction in the observed rate constant for CES1 inactivation by fluorophosphonates. WWL50, a reported carbamate inhibitor of mouse CES1, blocked oseltamivir hydrolysis activity in human cell homogenates, confirming CES1 is the primary prodrug activating enzyme for oseltamivir in human liver and intestinal cell lines. The related carbamate inhibitor WWL79 inhibited mouse but not human CES1, providing a series of probes for analyzing prodrug activation mechanisms in different preclinical models. Overall, we present a substrate-competitive activity-based profiling approach for broadly surveying candidate prodrug hydrolyzing enzymes and outline the kinetic parameters for activating enzyme discovery, ester prodrug design, and

  3. Start-up and maturation phases of a full-scale, high-rate anaerobic pond bioreactor(®) plus improved facultative ponds to treat municipal wastewater.

    PubMed

    Peña, M R; Aponte, A; Toro, A F

    2015-01-01

    Results of the start-up and maturation phases of a full-scale, high-rate anaerobic pond bioreactor (HRAPB)(®) plus improved facultative ponds (IFPs) to treat municipal wastewater are presented (CODt: 759 mg L⁻¹, CODf: 219 mg L⁻¹, S-SO(4)(2-): 102 mg L⁻¹, and Cr⁺: 1,500 μgL⁻¹). The start-up of the HRAPB(®) comprised, first, the application of a selective pressure increasing up-flow velocity rates. Second, batch stages between successive rates were allowed until 70% of the initial CODf was removed. The IFPs were left in batch and ended when in-pond Chlorophyll-a concentration reached 800 μgL⁻¹. Subsequently, the system underwent gradual maturation and reached effluent concentrations of CODt: 223 mg L⁻¹, CODf: 50 mg L⁻¹, and Cr⁺: 60 μgL⁻¹. The actual efficiency of the system compared with the expected design efficiency was lower given the characteristics of the influent wastewater biochemical oxygen demand/chemical oxygen demand ratios < 0.4, presence of Cr⁺ >1,000 μgL⁻¹, and variations in both conductivity (500-4,500 μScm⁻¹) and pH (6.5-10.5 units). Nonetheless, the system exhibited an adaptation state in less than 1.5 months and yielded an ST/SV ratio of 0.46, and specific methanogenic activity of 0.43 g-CH4-CODg⁻¹SV⁻¹d⁻¹ for HRAPB(®); the in-pond Chlorophyll-a was on average 1,200 μgL⁻¹ in the IFPs, which demonstrated the robustness of these eco-technologies in tropical conditions.

  4. Power Balance Modeling and Validation for ST Startup Using Local Helicity Injection

    NASA Astrophysics Data System (ADS)

    Barr, J. L.; Bodner, G. M.; Bongard, M. W.; Burke, M. G.; Fonck, R. J.; Hinson, E. T.; Perry, J. M.; Reusch, J. A.; Schlossberg, D. J.

    2015-11-01

    Local Helicity Injection (LHI) uses localized current injectors for routine Ip<0.18 MA non-solenoidal startup on the Pegasus ST. A power-balance model is under development for predictive Ip t using helicity-balance to quantify LHI's effective current drive, Veff. Analytic formulas for low-A plasma inductance and vertical field are used to account for the inductive effects of dynamic shape evolution. These formulas are being validated against magnetic reconstructions of LHI discharges with varied shape evolutions. Initial results match experimental Ip t within 20 kA with assumed shaping and average resistivity (Spitzer, Te = 60 eV). Geometric effects and inductive drive provide 2.0 V along with Veff = 0.3 V to balance 1.1 V of resistive losses and 1.2 V inductive reactance to ramping Ip. The model is especially sensitive to resistivity when Te<150 eV. Initial Thomson Scattering results give core Te = 72 +/-22 eV, and at times suggest higher central electron energies. Spatial and temporal scans are underway to quantify LHI plasma resistivity and transport. MA-class startup in NSTX-U will require increased area (Ainj >= 40 cm2) LHI systems that play a larger role in current drive than geometric effects, with Veff dropping from >10 V to on-par with inductive effects. This regime is accessed in Pegasus at Ip ≅ 300 kA. Work supported by US DOE grants DE-FG02-96ER54375 and DE-SC0006928.

  5. Overview of Non-Solenoidal Startup Studies in the Pegasus ST

    NASA Astrophysics Data System (ADS)

    Bongard, M. W.; Barr, J. L.; Bodner, G. M.; Burke, M. G.; Fonck, R. J.; Pachicano, J. L.; Perry, J. M.; Reusch, J. A.; Richner, N. J.; Rodriguez Sanchez, C.; Schlossberg, D. J.

    2016-10-01

    Local helicity injection (LHI) is a non-solenoidal startup method pursued on Pegasus utilizing compact, high power current sources (Ainj 2 - 4 cm2, Iinj 10 kA, Vinj 1 kV) at the plasma edge. Outboard injectors (Ninj = 4 , Ainj = 8 cm2) produce Ip 170 kA plasmas compatible with Ohmic drive. A 0-D model that treats the plasma as a resistive element with time-varying inductance and enforces Ip limits from Taylor relaxation is used to interpret experimental Ip(t) in several scenarios. Strong inductive drive arises from the plasma shape evolution, in addition to poloidal field induction. A new injector system has recently been installed in the lower divertor region (Ninj = 2 , Ainj = 8 cm2) to explore the implications of geometric placement of the helicity injectors on LHI startup. This geometry supports tests of reconnection dynamics seen in NIMROD simulations, high-BT effects expected in larger devices, and LHI electron confinement with and without inductive assist. Plasmas with Ip > 130 kA, Vinj 0.5 kV, Δtpulse 8 ms and BT /BT , max <= 50 % are produced with the inboard system to date, consistent with performance expectations. Higher Ip is expected with increased BT, Vinj, and Δtpulse . Thomson scattering data in both geometries indicate high Te >= 100 eV during LHI, suggesting the confinement is not strongly stochastic. Conceptual design work is exploring the feasibility of coaxial helicity injection and ECH heating on Pegasus in addition to LHI. Work supported by US DOE Grant DE-FG02-96ER54375.

  6. G T-Mohr Start-up Reactivity Insertion Transient Analysis Using Simulink

    SciTech Connect

    Fard, Mehdi Reisi; Blue, Thomas E.; Miller, Don W.

    2006-07-01

    As a part of a Department of Energy-Nuclear Engineering Research Initiative (NERI) Project, we at OSU are investigating SiC semiconductor detectors as neutron power monitors for Generation IV power reactors. As a part of this project, we are investigating the power monitoring requirements for a specific type of Generation IV reactor, namely the GT-MHR. To evaluate the power monitoring requirements for the GT-MHR that are most demanding for a SiC diode power monitor, we have developed a Simulink model to study the transient behavior of the GT-MHR. In this paper, we describe the application of the Simulink code to the analysis of a series of Start-up Reactivity Insertion Transients (SURITs). The SURIT is considered to be a limiting protectable accident in terms of establishing the dynamic range of a SiC power monitor because of the low count rate of the detector during the start-up and absence of the reactivity feedback mechanism at the beginning of transient. The SURIT is studied with the ultimate goal of identifying combinations of 1) reactor power scram setpoints and 2) cram initiation times (the time in which a scram must be initiated once the setpoint is exceeded) for which the GT-MHR core is protected in the event of a continuous withdrawal of a control rod bank from the core from low powers. The SURIT is initiated by withdrawing a rod bank when the reactor is cold (300 K) and sub-critical at the BOEC (Beginning of Equilibrium Cycle) condition. Various initial power levels have been considered corresponding to various degrees of sub-criticality and various source strengths. An envelope of response is determined to establish which initial powers correspond to the worst case SURIT. (authors)

  7. Second Harmonic 110 GHz ECH-assisted Start-up in KSTAR

    NASA Astrophysics Data System (ADS)

    Joung, M.; Gorelov, Y.; Park, S.; Jeong, J. H.; Bae, Y. S.; Yang, H. L.; Kim, J. H.; Han, S. H.; Kwak, J. G.; Lohr, J.

    2012-09-01

    In KSTAR device, a 110 GHz ECH system has been a useful heating device for a stable plasma start-up because a pure ohmic discharge scenario with a limited loop voltage of about 4 V was sometimes not successful for burn-through and plasma current ramp-up due to inconsistent wall conditioning and density control. Even though a pure ohmic discharge also was successful, the application of X2-mode ECH could reduce the flux consumption of poloidal field coils, leading to long pulse discharges. The ECH power was injected at the time of the field null formation after the onset of the toroidal electric field in which the electron temperature significantly increased up to 100 eV so that burn-through is overcome. The ECH heating enabled the formation of close flux surfaces earlier, leading to the reliable plasma current ramp-up, but, it caused outward plasma movement and failure of the plasma control, resulting in loss of the discharge. Moreover, impurities from the plasma facing components caused by not fully absorbed ECH power had a detrimental effect on the H-mode transition. In ECH-assisted start-up in the ramp-up phase, ECH power was mainly used for central electron heating, leading to reduction of the flux consumption of the central coils by increasing the electron temperature along with a density increase in the ramp-up phase. When X2-mode ECH power of 350 kW was injected at the mid-plane with a toroidal angle of 10 degree for 1 sec after the onset of the loop voltage, the flux consumption was reduced by about 30% in comparison with the pure ohmic discharges.

  8. Estimating evaporative vapor generation from automobiles based on parking activities.

    PubMed

    Dong, Xinyi; Tschantz, Michael; Fu, Joshua S

    2015-07-01

    A new approach is proposed to quantify the evaporative vapor generation based on real parking activity data. As compared to the existing methods, two improvements are applied in this new approach to reduce the uncertainties: First, evaporative vapor generation from diurnal parking events is usually calculated based on estimated average parking duration for the whole fleet, while in this study, vapor generation rate is calculated based on parking activities distribution. Second, rather than using the daily temperature gradient, this study uses hourly temperature observations to derive the hourly incremental vapor generation rates. The parking distribution and hourly incremental vapor generation rates are then adopted with Wade-Reddy's equation to estimate the weighted average evaporative generation. We find that hourly incremental rates can better describe the temporal variations of vapor generation, and the weighted vapor generation rate is 5-8% less than calculation without considering parking activity.

  9. Rethinking food anticipatory activity in the activity-based anorexia rat model.

    PubMed

    Wu, Hemmings; van Kuyck, Kris; Tambuyzer, Tim; Luyten, Laura; Aerts, Jean-Marie; Nuttin, Bart

    2014-01-29

    When a rat is on a limited fixed-time food schedule with full access to a running wheel (activity-based anorexia model, ABA), its activity level will increase hours prior to the feeding period. This activity, called food-anticipatory activity (FAA), is a hypothesized parallel to the hyperactivity symptom in human anorexia nervosa. To investigate in depth the characteristics of FAA, we retrospectively analyzed the level of FAA and activities during other periods in ABA rats. To our surprise, rats with the most body weight loss have the lowest level of FAA, which contradicts the previously established link between FAA and the severity of ABA symptoms. On the contrary, our study shows that postprandial activities are more directly related to weight loss. We conclude that FAA alone may not be sufficient to reflect model severity, and activities during other periods may be of potential value in studies using ABA model.

  10. Active devices based on organic semiconductors for wearable applications.

    PubMed

    Barbaro, Massimo; Caboni, Alessandra; Cosseddu, Piero; Mattana, Giorgio; Bonfiglio, Annalisa

    2010-05-01

    Plastic electronics is an enabling technology for obtaining active (transistor based) electronic circuits on flexible and/or nonplanar surfaces. For these reasons, it appears as a perfect candidate to promote future developments of wearable electronics toward the concept of fabrics and garments made by functional (in this case, active electronic) yarns. In this paper, a panoramic view of recent achievements and future perspectives is given.

  11. Active-Q: Validation of the Web-Based Physical Activity Questionnaire Using Doubly Labeled Water

    PubMed Central

    Trolle Lagerros, Ylva; Christensen, Sara Elisabeth; Möller, Elisabeth; Wright, Antony; Sjölander, Arvid; Bälter, Katarina

    2012-01-01

    Background Increased use of the Internet provides new opportunities for collecting data in large studies. The aim of our new Web-based questionnaire, Active-Q, is to assess total physical activity and inactivity in adults. Active-Q assesses habitual activity during the past year via questions in four different domains: (1) daily occupation, (2) transportation to and from daily occupation, (3) leisure time activities, and (4) sporting activities. Objective The objective of our study is to validate Active-Q’s energy expenditure estimates using the doubly labeled water (DLW) method, and to assess the reproducibility of Active-Q by comparing the results of the questionnaire completed by the same group on two occasions. Methods The validity and reproducibility of Active-Q were assessed in a group of 37 individuals, aged 20 to 65 years. Active-Q was distributed via email to the participants. The total energy expenditure of the participants was assessed using DLW for 11 consecutive days. Results The median time to complete Active-Q was 6.1 minutes. The majority of participants (27/37, 73%) reported that the questionnaire was “easy” or “very easy” to answer. On average, Active-Q overestimated the total daily energy expenditure by 440 kJ compared with the DLW. The Spearman correlation between the two methods was r = 0.52 (P < .001). The intraclass correlation coefficient for total energy expenditure between the results of Active-Q completed on two occasions was 0.83 (95% CI 0.73-0.93). Conclusions Active-Q is a valid and reproducible method of assessing total energy expenditure. It is also a user-friendly method and suitable for Web-based data collection in large epidemiological studies. PMID:22356755

  12. Point-of-use filter membrane selection, start-up, and conditioning for low-defect photolithography coatings

    NASA Astrophysics Data System (ADS)

    Brakensiek, Nick; Cronin, Michael

    2013-03-01

    Recent innovations in device design, including FinFETs and metal gate technologies, have required similar innovation in lithographic materials and process development. Complex processes such as double patterning and multilayer imaging require new and novel material chemistries to meet the rigorous defect level requirements for successful yield. To address these complex processes, new materials for multilayer imaging, including spin-on hardmask layers and thick carbon underlayers, have been introduced. These two types of materials have different roles in the multilayer imaging scheme, and likewise the chemistries that are used in these materials are different. To evaluate the wide variety of materials, it is necessary to be able to install them on a coater-track quickly and efficiently and to ensure that the chosen filter uses the best available filtration settings to provide the best-performing material. Typically end users of point-of-use filters will install a new filter, which will be primed with the best-known method, and purge chemical until a defect baseline is reached. This study examines the interaction between a spin-on hardmask chemistry and membrane materials, examining decreasing pore size and the differential pressure increases. Under these conditions, known issues with particles, microbubbles, or oddly timed defect excursions should be able to be avoided with the proper selection and start-up of the filter. An Entegris IntelliGen® Mini dispense system with Impact® 2 filters was used to test different filtration settings on various filtration membranes and determine the best settings for each membrane type. These pumps have the capability to control differential pressure across the filter based upon its operating parameters. Results of this investigation will show that for the spin-on hardmask material, optimizing differential pressure across the filter by adjusting the IntelliGen® Mini operating parameters will ultimately reduce blanket coat defect

  13. Activities identification for activity-based cost/management applications of the diagnostics outpatient procedures.

    PubMed

    Alrashdan, Abdalla; Momani, Amer; Ababneh, Tamador

    2012-01-01

    One of the most challenging problems facing healthcare providers is to determine the actual cost for their procedures, which is important for internal accounting and price justification to insurers. The objective of this paper is to find suitable categories to identify the diagnostic outpatient medical procedures and translate them from functional orientation to process orientation. A hierarchal task tree is developed based on a classification schema of procedural activities. Each procedure is seen as a process consisting of a number of activities. This makes a powerful foundation for activity-based cost/management implementation and provides enough information to discover the value-added and non-value-added activities that assist in process improvement and eventually may lead to cost reduction. Work measurement techniques are used to identify the standard time of each activity at the lowest level of the task tree. A real case study at a private hospital is presented to demonstrate the proposed methodology.

  14. Activity-Based Screening of Metagenomic Libraries for Hydrogenase Enzymes.

    PubMed

    Adam, Nicole; Perner, Mirjam

    2017-01-01

    Here we outline how to identify hydrogenase enzymes from metagenomic libraries through an activity-based screening approach. A metagenomic fosmid library is constructed in E. coli and the fosmids are transferred into a hydrogenase deletion mutant of Shewanella oneidensis (ΔhyaB) via triparental mating. If a fosmid exhibits hydrogen uptake activity, S. oneidensis' phenotype is restored and hydrogenase activity is indicated by a color change of the medium from yellow to colorless. This new method enables screening of 48 metagenomic fosmid clones in parallel.

  15. Synthesis and antioxidant activity of peptide-based ebselen analogues.

    PubMed

    Satheeshkumar, Kandhan; Mugesh, Govindasamy

    2011-04-18

    A series of di- and tripeptide-based ebselen analogues has been synthesized. The compounds were characterized by (1)H, (13)C, and (77)Se NMR spectroscopy and mass spectral techniques. The glutathione peroxidase (GPx)-like antioxidant activity has been studied by using H(2)O(2) , tert-butyl hydroperoxide (tBuOOH), and cumene hydroperoxide (Cum-OOH) as substrates, and glutathione (GSH) as a cosubstrate. Although all the peptide-based compounds have a selenazole ring similar to that of ebselen, the GPx activity of these compounds highly depends on the nature of the peptide moiety attached to the nitrogen atom of the selenazole ring. It was observed that the introduction of a phenylalanine (Phe) amino acid residue in the N-terminal reduces the activity in all three peroxide systems. On the other hand, the introduction of aliphatic amino acid residues such as valine (Val) significantly enhances the GPx activity of the ebselen analogues. The difference in the catalytic activity of dipeptide-based ebselen derivatives can be ascribed mainly to the change in the reactivity of these compounds toward GSH and peroxide. Although the presence of the Val-Ala-CO(2) Me moiety facilitates the formation of a catalytically active selenol species, the reaction of ebselen analogues that has a Phe-Ile-CO(2) Me residue with GSH does not generate the corresponding selenol. To understand the antioxidant activity of the peptide-based ebselen analogues in the absence of GSH, these compounds were studied for their ability to inhibit peroxynitrite (PN)-mediated nitration of bovine serum albumin (BSA) and oxidation of dihydrorhodamine 123. In contrast to the GPx activity, the PN-scavenging activity of the Phe-based peptide analogues was found to be comparable to that of the Val-based compounds. However, the introduction of an additional Phe residue to the ebselen analogue that had a Val-Ala dipeptide significantly reduced the potency of the parent compound in PN-mediated nitration.

  16. Understanding human activity patterns based on space-time-semantics

    NASA Astrophysics Data System (ADS)

    Huang, Wei; Li, Songnian

    2016-11-01

    Understanding human activity patterns plays a key role in various applications in an urban environment, such as transportation planning and traffic forecasting, urban planning, public health and safety, and emergency response. Most existing studies in modeling human activity patterns mainly focus on spatiotemporal dimensions, which lacks consideration of underlying semantic context. In fact, what people do and discuss at some places, inferring what is happening at the places, cannot be simple neglected because it is the root of human mobility patterns. We believe that the geo-tagged semantic context, representing what individuals do and discuss at a place and a specific time, drives a formation of specific human activity pattern. In this paper, we aim to model human activity patterns not only based on space and time but also with consideration of associated semantics, and attempt to prove a hypothesis that similar mobility patterns may have different motivations. We develop a spatiotemporal-semantic model to quantitatively express human activity patterns based on topic models, leading to an analysis of space, time and semantics. A case study is conducted using Twitter data in Toronto based on our model. Through computing the similarities between users in terms of spatiotemporal pattern, semantic pattern and spatiotemporal-semantic pattern, we find that only a small number of users (2.72%) have very similar activity patterns, while the majority (87.14%) show different activity patterns (i.e., similar spatiotemporal patterns and different semantic patterns, similar semantic patterns and different spatiotemporal patterns, or different in both). The population of users that has very similar activity patterns is decreased by 56.41% after incorporating semantic information in the corresponding spatiotemporal patterns, which can quantitatively prove the hypothesis.

  17. Active Desiccant-Based Preconditioning Market Analysis and Product Development

    SciTech Connect

    Fischer, J.

    2001-01-11

    The Phase 1 report (ORNL/Sub/94-SVO44/1), completed earlier in this program, involved a comprehensive field survey and market analysis comparing various specialized outdoor air handling units. This initial investigation included conventional cooling and reheat, conventional cooling with sensible recovery, total energy recovery systems (passive desiccant technology) and various active desiccant systems. The report concluded that several markets do promise a significant sales opportunity for a Climate Changer-based active desiccant system offering. (Climate Changer is a registered trademark of Trane Company.) This initial market analysis defined the wants and needs of the end customers (design engineers and building owners), which, along with subsequent information included in this report, have been used to guide the determination of the most promising active desiccant system configurations. This Phase 2 report begins with a summary of a more thorough investigation of those specific markets identified as most promising for active desiccant systems. Table 1 estimates the annual sales potential for a cost-effective product line of active desiccant systems, such as that built from Climate Changer modules. The Product Development Strategy section describes the active desiccant system configurations chosen to best fit the needs of the marketplace while minimizing system options. Key design objectives based on market research are listed in this report for these active desiccant systems. Corresponding performance goals for the dehumidification wheel required to meet the overall system design objectives are also defined. The Performance Modeling section describes the strategy used by SEMCO to design the dehumidification wheels integrated into the prototype systems currently being tested as part of the U.S. Department of Energy's Advanced Desiccant Technology Program. Actual performance data from wheel testing was used to revise the system performance and energy analysis

  18. The discourse of design-based science classroom activities

    NASA Astrophysics Data System (ADS)

    Azevedo, Flávio S.; Martalock, Peggy L.; Keser, Tugba

    2015-06-01

    This paper is an initial contribution to a general theory in which science classroom activity types and epistemological discourse practices are systematically linked. The idea is that activities and discourse are reflexively related, so that different types of science classroom activities (e.g., scientific argumentation, modeling, and design) recruit characteristically distinct forms of participants' (students and teacher) discourse. Such a general theory would eventually map out the full spectrum of discourse practices (and their patterns of manifestation) across various kinds of science classroom activities, and reveal new relationships between forms of both discourse and activities. Because this defines a complex and long-term project, here our aim is simply to delineate this larger theoretical program and to illustrate it with a detailed case study—namely, that of mapping out and characterizing the discourse practices of design- based science classroom activities. To do so, we draw on data from an activity that is prototypically design-based—i.e., one in which students iteratively design and refine an artifact (in this case, pictorial representations of moving objects)—and examine the structure and dynamics of the whole-class discourse practices that emerge around these representational forms. We then compare and contrast these discourse practices to those of an activity that is prototypical of scientific argumentation (taken from the literature)—i.e., one in which students argue between competing theories and explanations of a phenomenon—and begin to illustrate the kinds of insights our theoretical program might afford.

  19. 24 CFR 585.406 - Faith-based activities.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... out its mission, including the definition, practice, and expression of its religious beliefs, provided... program beneficiary or prospective program beneficiary on the basis of religion or religious belief. (e... activities. (a) Organizations that are religious or faith-based are eligible, on the same basis as any...

  20. 24 CFR 1003.600 - Faith-based activities.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ..., and expression of its religious beliefs, provided that it does not engage in any inherently religious... Requirements § 1003.600 Faith-based activities. (a) Religious organizations are eligible, on the same basis as... shall discriminate against an organization on the basis of the organization's religious character...

  1. 24 CFR 1003.600 - Faith-based activities.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ..., and expression of its religious beliefs, provided that it does not engage in any inherently religious... Requirements § 1003.600 Faith-based activities. (a) Religious organizations are eligible, on the same basis as... shall discriminate against an organization on the basis of the organization's religious character...

  2. 24 CFR 585.406 - Faith-based activities.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... out its mission, including the definition, practice, and expression of its religious beliefs, provided... program beneficiary or prospective program beneficiary on the basis of religion or religious belief. (e... activities. (a) Organizations that are religious or faith-based are eligible, on the same basis as any...

  3. A Conceptual Framework Based on Activity Theory for Mobile CSCL

    ERIC Educational Resources Information Center

    Zurita, Gustavo; Nussbaum, Miguel

    2007-01-01

    There is a need for collaborative group activities that promote student social interaction in the classroom. Handheld computers interconnected by a wireless network allow people who work on a common task to interact face to face while maintaining the mediation afforded by a technology-based system. Wirelessly interconnected handhelds open up new…

  4. Review of Scientific & Technical Numeric Data Base Activities.

    ERIC Educational Resources Information Center

    Wood, Barbara L.

    This examination of numeric data base activities grew out of a continuing effort to develop a system of statistical indicators of scientific and technical communication. A broad mix of directories, listing by subject field, reports, mail inquiries and telephone and face-to-face interviews was used to collect information. Scientific and technical…

  5. Space-Based Astronomy: A Teacher's Guide with Activities.

    ERIC Educational Resources Information Center

    National Aeronautics and Space Administration, Washington, DC.

    This curriculum guide uses hands-on activities to help grade 5-8 students and teachers understand the significance of space-based astronomy--astronomical observations made from outside the Earth's atmosphere. The guide begins with a survey of astronomy-related spacecraft that the National Aeronautics and Space Administration (NASA) has sent into…

  6. Localized Patch-Based Fuzzy Active Contours for Image Segmentation

    PubMed Central

    Liu, Huaxiang; Zhang, Liting; Liu, Jun

    2016-01-01

    This paper presents a novel fuzzy region-based active contour model for image segmentation. By incorporating local patch-energy functional along each pixel of the evolving curve into the fuzziness of the energy, we construct a patch-based energy function without the regurgitation term. Its purpose is not only to make the active contour evolve very stably without the periodical initialization during the evolution but also to reduce the effect of noise. In particular, in order to reject local minimal of the energy functional, we utilize a direct method to calculate the energy alterations instead of solving the Euler-Lagrange equation of the underlying problem. Compared with other fuzzy active contour models, experimental results on synthetic and real images show the advantages of the proposed method in terms of computational efficiency and accuracy. PMID:28070210

  7. The Utility of Auroral Image-based Activities Metrics

    NASA Technical Reports Server (NTRS)

    Germany, G.; Spann, J.; Deverapalli, C.; Hung, C.-C.

    2004-01-01

    Auroral activity indices such as Hemispheric Power and Auroral Boundary are currently key data products used for space weather predictions and nowcasting. However, these products are necessarily based on limited observations which must be extrapolated to provide global coverage. The advent of routine space-based auroral imaging in the last decade offers the seeming advantage of more detailed measures of auroral activity. Examples of image-derived products include energy deposition maps, oval location, cap size, and morphological classification. However, activity metrics derived from auroral images have shortcomings, as well. For example, limited fields-of-view and orbital motion prevent full coverage of the auroral regions. This paper will examine the utility of activity metrics derived h m auroral images for operational purposes. The eight-year collection of Polar UVI images databased in the UVI Online Search Tool (OST) will be used to illustrate the advantages and shortcomings of auroral activity metrics. The potential role of other currently-active imaging missions will also be examined and correlative studies to date using auroral imaging will be summarized.

  8. Energy monitoring system based on human activity in the workplace

    NASA Astrophysics Data System (ADS)

    Mustafa, Nur Hanim; Husain, Mohd Nor; Aziz, Mohamad Zoinol Abidin Abdul; Othman, Mohd Azlishah; Malek, Fareq

    2015-05-01

    Human behaviors always related to day routine activities in a smart house directly give the significant factor to manage energy usage in human life. An Addition that, the factor will contribute to the best efficiency of the system. This paper will focus on the monitoring efficiency based on duration time in office hours around 8am until 5pm which depend on human behavior at working place. Besides that, the correlation coefficient method is used to show the relation between energy consumption and energy saving based on the total hours of time energy spent. In future, the percentages of energy monitoring system usage will be increase to manage energy saving based on human behaviors. This scenario will help to see the human activity in the workplace in order to get the energy saving and support world green environment.

  9. A review on visible light active perovskite-based photocatalysts.

    PubMed

    Kanhere, Pushkar; Chen, Zhong

    2014-12-01

    Perovskite-based photocatalysts are of significant interest in the field of photocatalysis. To date, several perovskite material systems have been developed and their applications in visible light photocatalysis studied. This article provides a review of the visible light (λ > 400 nm) active perovskite-based photocatalyst systems. The materials systems are classified by the B site cations and their crystal structure, optical properties, electronic structure, and photocatalytic performance are reviewed in detail. Titanates, tantalates, niobates, vanadates, and ferrites form important photocatalysts which show promise in visible light-driven photoreactions. Along with simple perovskite (ABO3) structures, development of double/complex perovskites that are active under visible light is also reviewed. Various strategies employed for enhancing the photocatalytic performance have been discussed, emphasizing the specific advantages and challenges offered by perovskite-based photocatalysts. This review provides a broad overview of the perovskite photocatalysts, summarizing the current state of the work and offering useful insights for their future development.

  10. [Peculicidal activity of plant essential oils and their based preparations].

    PubMed

    Lopatina, Iu V; Eremina, O Iu

    2014-01-01

    The peculicidal activity of eight plant essential oils in 75% isopropyl alcohol was in vitro investigated. Of them, the substances that were most active against lice were tea tree (Melaleuca), eucalyptus, neem, citronella (Cymbopogon nardus), and clove (Syzygium aromaticum) oils; KT50 was not more than 3 minutes on average; KT95 was 4 minutes. After evaporating the solvent, only five (tea tree, cassia, clove, anise (Anisum vulgare), and Japanese star anise (Illicium anisatum) oils) of the eight test botanical substances were active against lice. At the same time, KT50 and KT95 showed 1.5-5-fold increases. Citronella and anise oils had incomplete ovicidal activity. Since the lice were permethrin-resistant, the efficacy of preparations based on essential oils was much higher than permethrin.

  11. An Alternative to Business Plan Based Advice for Start-Ups?

    ERIC Educational Resources Information Center

    Bridge, Simon; Hegarty, Cecilia

    2012-01-01

    Business plans are advocated by many business support professionals and others, such as educators in higher education institutions, because they suit their purposes. A typical view is that a business plan is "one of the most important steps in setting up any new business" (Burns, 2011); but their hegemony is now being questioned. Sarasvathy (2008)…

  12. Charter Schools: Guidance Needed for Military Base Schools on Startup and Operational Issues

    DTIC Science & Technology

    2013-02-01

    offers a buddy program for military-connected students transferring into the school, a self - esteem program, and a support group for students with a...MasterCard, Visa, check, or money order. Call for additional information. Connect with GAO on Facebook , Flickr, Twitter, and YouTube. Subscribe

  13. Instruction-based response activation depends on task preparation.

    PubMed

    Liefooghe, Baptist; De Houwer, Jan; Wenke, Dorit

    2013-06-01

    An increasing number of studies have demonstrated that a response in one task can be activated automatically on the basis merely of instructed stimulus-response (S-R) mappings belonging to another task. Such instruction-based response activations are considered to be evidence for the formation of S-R associations on the basis of the S-R mappings for an upcoming, but not yet executed, task. A crucial but somewhat neglected assumption is that instructed S-R associations are formed only under conditions that impose a sufficient degree of task preparation. Accordingly, in the present study we investigated the relation between task preparation and the instruction-based task-rule congruency effect, which is an index of response activation on the basis of instructions. The results from two experiments demonstrated that merely instructed S-R mappings of a particular task only elicit instruction-based response activations when that task is prepared for to a sufficient degree. Implications are discussed for the representation of instructed S-R mappings in working memory.

  14. ActivitySim: large-scale agent based activity generation for infrastructure simulation

    SciTech Connect

    Gali, Emmanuel; Eidenbenz, Stephan; Mniszewski, Sue; Cuellar, Leticia; Teuscher, Christof

    2008-01-01

    The United States' Department of Homeland Security aims to model, simulate, and analyze critical infrastructure and their interdependencies across multiple sectors such as electric power, telecommunications, water distribution, transportation, etc. We introduce ActivitySim, an activity simulator for a population of millions of individual agents each characterized by a set of demographic attributes that is based on US census data. ActivitySim generates daily schedules for each agent that consists of a sequence of activities, such as sleeping, shopping, working etc., each being scheduled at a geographic location, such as businesses or private residences that is appropriate for the activity type and for the personal situation of the agent. ActivitySim has been developed as part of a larger effort to understand the interdependencies among national infrastructure networks and their demand profiles that emerge from the different activities of individuals in baseline scenarios as well as emergency scenarios, such as hurricane evacuations. We present the scalable software engineering principles underlying ActivitySim, the socia-technical modeling paradigms that drive the activity generation, and proof-of-principle results for a scenario in the Twin Cities, MN area of 2.6 M agents.

  15. Small business activity does not measure entrepreneurship.

    PubMed

    Henrekson, Magnus; Sanandaji, Tino

    2014-02-04

    Entrepreneurship policy mainly aims to promote innovative Schumpeterian entrepreneurship. However, the rate of entrepreneurship is commonly proxied using quantity-based metrics, such as small business activity, the self-employment rate, or the number of startups. We argue that those metrics give rise to misleading inferences regarding high-impact Schumpeterian entrepreneurship. To unambiguously identify high-impact entrepreneurs we focus on self-made billionaires (in US dollars) who appear on Forbes Magazine's list and who became wealthy by founding new firms. We identify 996 such billionaire entrepreneurs in 50 countries in 1996-2010, a systematic cross-country study of billionaire entrepreneurs. The rate of billionaire entrepreneurs correlates negatively with self-employment, small business ownership, and firm startup rates. Countries with higher income, higher trust, lower taxes, more venture capital investment, and lower regulatory burdens have higher billionaire entrepreneurship rates but less self-employment. Despite its limitations, the number of billionaire entrepreneurs appears to be a plausible cross-country measure of Schumpeterian entrepreneurship.

  16. Small business activity does not measure entrepreneurship

    PubMed Central

    Henrekson, Magnus; Sanandaji, Tino

    2014-01-01

    Entrepreneurship policy mainly aims to promote innovative Schumpeterian entrepreneurship. However, the rate of entrepreneurship is commonly proxied using quantity-based metrics, such as small business activity, the self-employment rate, or the number of startups. We argue that those metrics give rise to misleading inferences regarding high-impact Schumpeterian entrepreneurship. To unambiguously identify high-impact entrepreneurs we focus on self-made billionaires (in US dollars) who appear on Forbes Magazine’s list and who became wealthy by founding new firms. We identify 996 such billionaire entrepreneurs in 50 countries in 1996–2010, a systematic cross-country study of billionaire entrepreneurs. The rate of billionaire entrepreneurs correlates negatively with self-employment, small business ownership, and firm startup rates. Countries with higher income, higher trust, lower taxes, more venture capital investment, and lower regulatory burdens have higher billionaire entrepreneurship rates but less self-employment. Despite its limitations, the number of billionaire entrepreneurs appears to be a plausible cross-country measure of Schumpeterian entrepreneurship. PMID:24449873

  17. ABAP: antibody-based assay for peptidylarginine deiminase activity.

    PubMed

    Zendman, Albert J W; Raijmakers, Reinout; Nijenhuis, Suzanne; Vossenaar, Erik R; Tillaart, Marloes van den; Chirivi, Renato G S; Raats, Jos M H; van Venrooij, Walther J; Drijfhout, Jan W; Pruijn, Ger J M

    2007-10-15

    Members of the family of peptidylarginine deiminases (PADs, EC 3.5.3.15) catalyze the posttranslational modification of peptidylarginine into peptidylcitrulline. Citrulline-containing epitopes have been shown to be major and specific targets of autoantibodies produced by rheumatoid arthritis patients. Recently, the citrullination of histone proteins by PAD enzyme was reported to influence gene expression levels. These findings greatly increase the interest in the PAD enzymes and their activities. A few procedures to monitor PAD activity in biological samples have been described previously. However, these assays either have low sensitivity or are rather laborious. Here we describe a reliable and reproducible method for the determination of PAD activity in both purified and crude samples. The method is based on the quantification of PAD-dependent citrullination of peptides, immobilized in microtiter plates, using antibodies that are exclusively reactive with the reaction product(s). Our results demonstrate that this antibody-based assay for PAD activity, called ABAP, is very sensitive and can be applied to monitor PAD activity in biological samples.

  18. Optimal semi-active vibration absorber for harmonic excitation based on controlled semi-active damper

    NASA Astrophysics Data System (ADS)

    Weber, F.

    2014-09-01

    The semi-active vibration absorber (SVA) based on controlled semi-active damper is formulated to realize the behaviour of the passive undamped vibration absorber tuned to the actual harmonic disturbing frequency. It is shown that the controlled stiffness force, which is emulated by the semi-active damper to realize the precise real-time frequency tuning of the SVA, is unpreventably combined with the generation of undesirable damping in the semi-active damper whereby the SVA does not behave as targeted. The semi-active stiffness force is therefore optimized for minimum primary structure response. The results point out that the optimal semi-active stiffness force reduces the undesirable energy dissipation in the SVA at the expenses of slight imprecise frequency tuning. Based on these findings, a real-time applicable suboptimal SVA is formulated that also takes the relative motion constraint of real mass dampers into account. The results demonstrate that the performance of the suboptimal SVA is closer to that of the active solution than that of the passive mass damper.

  19. Catechol-based matrix metalloproteinase inhibitors with additional antioxidative activity.

    PubMed

    Tauro, Marilena; Laghezza, Antonio; Loiodice, Fulvio; Piemontese, Luca; Caradonna, Alessia; Capelli, Davide; Montanari, Roberta; Pochetti, Giorgio; Di Pizio, Antonella; Agamennone, Mariangela; Campestre, Cristina; Tortorella, Paolo

    2016-01-01

    New catechol-containing chemical entities have been investigated as matrix metalloproteinase inhibitors as well as antioxidant molecules. The combination of the two properties could represent a useful feature due to the potential application in all the pathological processes characterized by increased proteolytic activity and radical oxygen species (ROS) production, such as inflammation and photoaging. A series of catechol-based molecules were synthesized and tested for both proteolytic and oxidative inhibitory activity, and the detailed binding mode was assessed by crystal structure determination of the complex between a catechol derivative and the matrix metalloproteinase-8. Surprisingly, X-ray structure reveals that the catechol oxygens do not coordinates the zinc atom.

  20. Modeling earthquake activity using a memristor-based cellular grid

    NASA Astrophysics Data System (ADS)

    Vourkas, Ioannis; Sirakoulis, Georgios Ch.

    2013-04-01

    Earthquakes are absolutely among the most devastating natural phenomena because of their immediate and long-term severe consequences. Earthquake activity modeling, especially in areas known to experience frequent large earthquakes, could lead to improvements in infrastructure development that will prevent possible loss of lives and property damage. An earthquake process is inherently a nonlinear complex system and lately scientists have become interested in finding possible analogues of earthquake dynamics. The majority of the models developed so far were based on a mass-spring model of either one or two dimensions. An early approach towards the reordering and the improvement of existing models presenting the capacitor-inductor (LC) analogue, where the LC circuit resembles a mass-spring system and simulates earthquake activity, was also published recently. Electromagnetic oscillation occurs when energy is transferred between the capacitor and the inductor. This energy transformation is similar to the mechanical oscillation that takes place in the mass-spring system. A few years ago memristor-based oscillators were used as learning circuits exposed to a train of voltage pulses that mimic environment changes. The mathematical foundation of the memristor (memory resistor), as the fourth fundamental passive element, has been expounded by Leon Chua and later extended to a more broad class of memristors, known as memristive devices and systems. This class of two-terminal passive circuit elements with memory performs both information processing and storing of computational data on the same physical platform. Importantly, the states of these devices adjust to input signals and provide analog capabilities unavailable in standard circuit elements, resulting in adaptive circuitry and providing analog parallel computation. In this work, a memristor-based cellular grid is used to model earthquake activity. An LC contour along with a memristor is used to model seismic activity

  1. Frequency Based Volcanic Activity Detection through Remotely Sensed Data

    NASA Astrophysics Data System (ADS)

    Worden, A. K.; Dehn, J.; Webley, P. W.

    2015-12-01

    Satellite remote sensing has proved to offer a useful and relatively inexpensive method for monitoring large areas where field work is logistically unrealistic, and potentially dangerous. Current sensors are able to detect the majority of explosive volcanic activity; those that tend to effect and represent larger scale changes in the volcanic systems, eventually relating to ash producing periods of extended eruptive activity, and effusive activity. As new spaceborne sensors are developed, the ability to detect activity improves so that a system to gauge the frequency of volcanic activity can be used as a useful monitoring tool. Four volcanoes were chosen for development and testing of a method to monitor explosive activity: Stromboli (Italy); Shishaldin and Cleveland (Alaska, USA); and Karymsky (Kamchatka, Russia). Each volcano studied had similar but unique signatures of pre-cursory and eruptive activity. This study has shown that this monitoring tool could be applied to a wide range of volcanoes and still produce useful and robust data. Our method deals specifically with the detection of small scale explosive activity. The method described here could be useful in an operational setting, especially at remote volcanoes that have the potential to impact populations, infrastructure, and the aviation community. A number of important factors will affect the validity of application of this method. They are: (1) the availability of a continuous and continually populated dataset; (2) appropriate and reasonable sensor resolutions; (3) a recorded history of the volcano's previous activity; and, if available, (4) some ground-based monitoring system. We aim to develop the method further to be able to capture and evaluate the frequency of other volcanic processes such as lava flows, phreatomagmatic eruptions and dome growth and collapse. The work shown here has served to illustrate the capability of this method and monitoring tool for use at remote, un-instrumented volcanoes.

  2. Making activity-based funding work for mental health.

    PubMed

    Rosenberg, Sebastian P; Hickie, Ian B

    2013-06-01

    The implementation of activity-based funding (ABF) in mental health from 1 July 2013 has significant risks and benefits. It is critical that the process of implementation is consistent with Australia's cherished goal of establishing a genuine and effective model of community-based mental health care. The infrastructure to support the application of ABF to mental health is currently weak and requires considerable development. States and territories are struggling to meet existing demand for largely hospital-based acute mental health care. There is a risk that valuable ABF-driven Commonwealth growth funds may be used to prop up these systems rather than drive the emergence of new models of community-based care. Some of these new models exist now and this article provides a short description. The aim is to help the Independent Hospital Pricing Authority better understand the landscape of mental health into which it now seeks to deploy ABF.

  3. Advanced extravehicular activity systems requirements definition study. Phase 2: Extravehicular activity at a lunar base

    NASA Technical Reports Server (NTRS)

    Neal, Valerie; Shields, Nicholas, Jr.; Carr, Gerald P.; Pogue, William; Schmitt, Harrison H.; Schulze, Arthur E.

    1988-01-01

    The focus is on Extravehicular Activity (EVA) systems requirements definition for an advanced space mission: remote-from-main base EVA on the Moon. The lunar environment, biomedical considerations, appropriate hardware design criteria, hardware and interface requirements, and key technical issues for advanced lunar EVA were examined. Six remote EVA scenarios (three nominal operations and three contingency situations) were developed in considerable detail.

  4. Effects of a Classroom-Based Physical Activity Program on Children's Physical Activity Levels

    ERIC Educational Resources Information Center

    Goh, Tan Leng; Hannon, James; Webster, Collin Andrew; Podlog, Leslie William; Brusseau, Timothy; Newton, Maria

    2014-01-01

    High levels of physical inactivity are evident among many American children. To address this problem, providing physical activity (PA) during the school day within the CSPAP framework, is one strategy to increase children's PA. Thus, the purpose of this study was to examine the effects of a classroom-based PA program on children's PA. Two hundred…

  5. Focus of attention in an activity-based scheduler

    NASA Technical Reports Server (NTRS)

    Sadeh, Norman; Fox, Mark S.

    1989-01-01

    Earlier research in job shop scheduling has demonstrated the advantages of opportunistically combining order-based and resource-based scheduling techniques. An even more flexible approach is investigated where each activity is considered a decision point by itself. Heuristics to opportunistically select the next decision point on which to focus attention (i.e., variable ordering heuristics) and the next decision to be tried at this point (i.e., value ordering heuristics) are described that probabilistically account for both activity precedence and resource requirement interactions. Preliminary experimental results indicate that the variable ordering heuristic greatly increases search efficiency. While least constraining value ordering heuristics have been advocated in the literature, the experimental results suggest that other value ordering heuristics combined with our variable-ordering heuristic can produce much better schedules without significantly increasing search.

  6. Time-Driven Activity-Based Costing in Emergency Medicine.

    PubMed

    Yun, Brian J; Prabhakar, Anand M; Warsh, Jonathan; Kaplan, Robert; Brennan, John; Dempsey, Kyle E; Raja, Ali S

    2016-06-01

    Value in emergency medicine is determined by both patient-important outcomes and the costs associated with achieving them. However, measuring true costs is challenging. Without an understanding of costs, emergency department (ED) leaders will be unable to determine which interventions might improve value for their patients. Although ongoing research may determine which outcomes are meaningful, an accurate costing system is also needed. This article reviews current costing mechanisms in the ED and their pitfalls. It then describes how time-driven activity-based costing may be superior to these current costing systems. Time-driven activity-based costing, in addition to being a more accurate costing system, can be used for process improvements in the ED.

  7. Validation of the thermal transport model used for ITER startup scenario predictions with DIII-D experimental data

    DOE PAGES

    Casper, T. A.; Meyer, W. H.; Jackson, G. L.; ...

    2010-12-08

    We are exploring characteristics of ITER startup scenarios in similarity experiments conducted on the DIII-D Tokamak. In these experiments, we have validated scenarios for the ITER current ramp up to full current and developed methods to control the plasma parameters to achieve stability. Predictive simulations of ITER startup using 2D free-boundary equilibrium and 1D transport codes rely on accurate estimates of the electron and ion temperature profiles that determine the electrical conductivity and pressure profiles during the current rise. Here we present results of validation studies that apply the transport model used by the ITER team to DIII-D discharge evolutionmore » and comparisons with data from our similarity experiments.« less

  8. Physicochemical characteristics and microbial community evolution of biofilms during the start-up period in a moving bed biofilm reactor.

    PubMed

    Zhu, Yan; Zhang, Yan; Ren, Hong-Qiang; Geng, Jin-Ju; Xu, Ke; Huang, Hui; Ding, Li-Li

    2015-03-01

    This study aimed to investigate biofilm properties evolution coupled with different ages during the start-up period in a moving bed biofilm reactor system. Physicochemical characteristics including adhesion force, extracellular polymeric substances (EPS), morphology as well as volatile solid and microbial community were studied. Results showed that the formation and development of biofilms exhibited four stages, including (I) initial attachment and young biofilm formation, (II) biofilms accumulation, (III) biofilm sloughing and updating, and (IV) biofilm maturation. During the whole start-up period, adhesion force was positively and significantly correlated with the contents of EPS, especially the content of polysaccharide. In addition, increased adhesion force and EPS were beneficial for biofilm retention. Gram-negative bacteria mainly including Sphaerotilus, Zoogloea and Haliscomenobacter were predominant in the initial stage. Actinobacteria was beneficial to resist sloughing. Furthermore, filamentous bacteria were dominant in maturation biofilm.

  9. Validation of the thermal transport model used for ITER startup scenario predictions with DIII-D experimental data

    SciTech Connect

    Casper, T. A.; Meyer, W. H.; Jackson, G. L.; Luce, T. C.; Hyatt, A. W.; Humphreys, D. A.; Turco, F.

    2010-12-08

    We are exploring characteristics of ITER startup scenarios in similarity experiments conducted on the DIII-D Tokamak. In these experiments, we have validated scenarios for the ITER current ramp up to full current and developed methods to control the plasma parameters to achieve stability. Predictive simulations of ITER startup using 2D free-boundary equilibrium and 1D transport codes rely on accurate estimates of the electron and ion temperature profiles that determine the electrical conductivity and pressure profiles during the current rise. Here we present results of validation studies that apply the transport model used by the ITER team to DIII-D discharge evolution and comparisons with data from our similarity experiments.

  10. Villin severing activity enhances actin-based motility in vivo.

    PubMed

    Revenu, Céline; Courtois, Matthieu; Michelot, Alphée; Sykes, Cécile; Louvard, Daniel; Robine, Sylvie

    2007-03-01

    Villin, an actin-binding protein associated with the actin bundles that support microvilli, bundles, caps, nucleates, and severs actin in a calcium-dependant manner in vitro. We hypothesized that the severing activity of villin is responsible for its reported role in enhancing cell plasticity and motility. To test this hypothesis, we chose a loss of function strategy and introduced mutations in villin based on sequence comparison with CapG. By pyrene-actin assays, we demonstrate that this mutant has a strongly reduced severing activity, whereas nucleation and capping remain unaffected. The bundling activity and the morphogenic effects of villin in cells are also preserved in this mutant. We thus succeeded in dissociating the severing from the three other activities of villin. The contribution of villin severing to actin dynamics is analyzed in vivo through the actin-based movement of the intracellular bacteria Shigella flexneri in cells expressing villin and its severing variant. The severing mutations abolish the gain of velocity induced by villin. To further analyze this effect, we reconstituted an in vitro actin-based bead movement in which the usual capping protein is replaced by either the wild type or the severing mutant of villin. Confirming the in vivo results, villin-severing activity enhances the velocity of beads by more than two-fold and reduces the density of actin in the comets. We propose a model in which, by severing actin filaments and capping their barbed ends, villin increases the concentration of actin monomers available for polymerization, a mechanism that might be paralleled in vivo when an enterocyte undergoes an epithelio-mesenchymal transition.

  11. Villin Severing Activity Enhances Actin-based Motility In Vivo

    PubMed Central

    Revenu, Céline; Courtois, Matthieu; Michelot, Alphée; Sykes, Cécile; Louvard, Daniel

    2007-01-01

    Villin, an actin-binding protein associated with the actin bundles that support microvilli, bundles, caps, nucleates, and severs actin in a calcium-dependant manner in vitro. We hypothesized that the severing activity of villin is responsible for its reported role in enhancing cell plasticity and motility. To test this hypothesis, we chose a loss of function strategy and introduced mutations in villin based on sequence comparison with CapG. By pyrene-actin assays, we demonstrate that this mutant has a strongly reduced severing activity, whereas nucleation and capping remain unaffected. The bundling activity and the morphogenic effects of villin in cells are also preserved in this mutant. We thus succeeded in dissociating the severing from the three other activities of villin. The contribution of villin severing to actin dynamics is analyzed in vivo through the actin-based movement of the intracellular bacteria Shigella flexneri in cells expressing villin and its severing variant. The severing mutations abolish the gain of velocity induced by villin. To further analyze this effect, we reconstituted an in vitro actin-based bead movement in which the usual capping protein is replaced by either the wild type or the severing mutant of villin. Confirming the in vivo results, villin-severing activity enhances the velocity of beads by more than two-fold and reduces the density of actin in the comets. We propose a model in which, by severing actin filaments and capping their barbed ends, villin increases the concentration of actin monomers available for polymerization, a mechanism that might be paralleled in vivo when an enterocyte undergoes an epithelio-mesenchymal transition. PMID:17182858

  12. Brain electrical activity analysis using wavelet-based informational tools

    NASA Astrophysics Data System (ADS)

    Rosso, O. A.; Martin, M. T.; Plastino, A.

    2002-10-01

    The traditional way of analyzing brain electrical activity, on the basis of Electroencephalography (EEG) records, relies mainly on visual inspection and years of training. Although it is quite useful, of course, one has to acknowledge its subjective nature that hardly allows for a systematic protocol. In order to overcome this undesirable feature, a quantitative EEG analysis has been developed over the years that introduces objective measures, reflecting not only the characteristics of the brain activity itself but also giving clues concerning the underlying associated neural dynamics. The processing of information by the brain is reflected in dynamical changes of the electrical activity in (i) time, (ii) frequency, and (iii) space. Therefore, the concomitant studies require methods capable of describing the qualitative variation of the signal in both time and frequency. In the present work we introduce new information tools based on the wavelet transform for the assessment of EEG data as adapted to a non-extensive scenario.

  13. [Active crop canopy sensor-based nitrogen diagnosis for potato].

    PubMed

    Yu, Jing; Li, Fei; Qin, Yong-Lin; Fan, Ming-Shou

    2013-11-01

    In the present study, two potato experiments involving different N rates in 2011 were conducted in Wuchuan County and Linxi County, Inner Mongolia. Normalized difference vegetation index (NDVI) was collected by an active GreenSeeker crop canopy sensor to estimate N status of potato. The results show that the NDVI readings were poorly correlated with N nutrient indicators of potato at vegetative Growth stage due to the influence of soil background. With the advance of growth stages, NDVI values were exponentially related to plant N uptake (R2 = 0.665) before tuber bulking stage and were linearly related to plant N concentration (R2 = 0.699) when plant fully covered soil. In conclusion, GreenSeeker active crop sensor is a promising tool to estimate N status for potato plants. The findings from this study may be useful for developing N recommendation method based on active crop canopy sensor.

  14. Effect of auditory isolation on activity-based anorexia.

    PubMed

    Fraga, Ángela; De Pedro, Belén; Cerrato, María; Carrera, Olaia; Gutiérrez, Emilio

    2012-01-01

    The objective was to study male and female rats exposed to Activity-Based Anorexia (ABA; simultaneous exposition to food restriction and free access to an activity wheel) under two conditions of sound attenuation, by means of different arrangements of wheels (standard versus isolation) in the laboratory room. Regardless of the sound attenuation condition, all but one male and one female with access to wheels had to be removed from the experiment, but extended ABA endurance was found in rats in the sound attenuation condition. Furthermore, significantly lower levels of running were observed in both males and females under the sound attenuation arrangement in the isolation condition. The results suggest that external stimulation plays a role in the activity displayed by rats exposed to ABA, and that the reduction of external stimulation diminishes running but does not protect rats from developing ABA.

  15. Charge dependent photodynamic activity of alanine based zinc phthalocyanines.

    PubMed

    Wang, Ao; Li, Yejing; Zhou, Lin; Yuan, Linxin; Lu, Shan; Lin, Yun; Zhou, Jiahong; Wei, Shaohua

    2014-12-01

    In this paper, to minimize the effects of different structure, three alanine-based zinc phthalocyanines (Pcs) of differing charges were engineered and synthesized with the same basic structure. On this premise, the relationship between nature of charge and photodynamic activity was studied. Besides, further verification and explanation of some inconsistent results were also carried out. The results showed that charge can influence the aggregation state, singlet oxygen generation ability and cellular uptake of Pcs, thereby affecting their photodynamic activity. In addition, the biomolecules inside cells may interact with Pcs of differing charges, which can also influence the aggregation state and singlet oxygen generation of the Pcs, and then influence the relationship between nature of charge and photodynamic activity.

  16. Activity-based probes for rhomboid proteases discovered in a mass spectrometry-based assay

    PubMed Central

    Vosyka, Oliver; Vinothkumar, Kutti R.; Wolf, Eliane V.; Brouwer, Arwin J.; Liskamp, Rob M. J.; Verhelst, Steven H. L.

    2013-01-01

    Rhomboid proteases are evolutionary conserved intramembrane serine proteases. Because of their emerging role in many important biological pathways, rhomboids are potential drug targets. Unfortunately, few chemical tools are available for their study. Here, we describe a mass spectrometry-based assay to measure rhomboid substrate cleavage and inhibition. We have identified isocoumarin inhibitors and developed activity-based probes for rhomboid proteases. The probes can distinguish between active and inactive rhomboids due to covalent, reversible binding of the active-site serine and stable modification of a histidine residue. Finally, the structure of an isocoumarin-based inhibitor with Escherichia coli rhomboid GlpG uncovers an unusual mode of binding at the active site and suggests that the interactions between the 3-substituent on the isocoumarin inhibitor and hydrophobic residues on the protease reflect S′ subsite binding. Overall, these probes represent valuable tools for rhomboid study, and the structural insights may facilitate future inhibitor design. PMID:23359682

  17. Development of bestatin-based activity-based probes for metallo-aminopeptidases.

    PubMed

    Harbut, Michael B; Velmourougane, Geetha; Reiss, Gilana; Chandramohanadas, Rajesh; Greenbaum, Doron C

    2008-11-15

    A novel set of activity-based probes (ABPs) for functionally profiling metallo-aminopeptidases was synthesized based on the bestatin inhibitor scaffold, the first synthesis of bestatin analogues using solid-phase techniques. These ABPs were shown to label metallo-aminopeptidases, using both a biotin and a fluorophore reporter, in an activity-dependent manner. This probe class was also shown to be amenable to 'click' chemistry labeling for possible use in live cells. Finally, we demonstrate that the ABPs are able to label an aminopeptidase in a complex proteome. Thus, these bestatin-based probes should have wide utility to functionally profile aminopeptidases in many biological systems.

  18. Activity-based analyses lead to better decision making.

    PubMed

    Player, S

    1998-08-01

    Activity-based costing (ABC) and activity-based management (ABM) are cost-management tools that are relatively new to the healthcare industry. ABC is used for strategic decision making. It assesses the costs associated with specific activities and resources and links those costs to specific internal and external customers of the healthcare enterprise (e.g., patients, service lines, and physician groups) to determine the costs associated with each customer. This cost information then can be adjusted to account for anticipated changes and to predict future costs. ABM, on the other hand, supports operations by focusing on the causes of costs and how costs can be reduced. It assesses cost drivers that directly affect the cost of a product or service, and uses performance measures to evaluate the financial or nonfinancial benefit an activity provides. By identifying each cost driver and assessing the value the element adds to the healthcare enterprise, ABM provides a basis for selecting areas that can be changed to reduce costs.

  19. The utilization of activity-based cost accounting in hospitals.

    PubMed

    Emmett, Dennis; Forget, Robert

    2005-01-01

    Healthcare costs are being examined on all fronts. Healthcare accounts for 11% of the gross national product and will continue to rise as the "babyboomers" reach retirement age. While ascertaining costs is important, most research shows that costing methods have not been implemented in hospitals. This study is concerned with the use of costing methods; particularly activity-based cost accounting. A mail survey of CFOs was undertaken to determine the type of cost accounting method they use. In addition, they were asked whether they were aware of activity-based cost accounting and whether they had implemented it or were planning to implement it. Only 71.8% were aware of it and only 4.7% had implemented it. In addition, only 52% of all hospitals report using any cost accounting systems. Education needs to ensure that all healthcare executives are cognizant of activity-based accounting and its importance in determining costs. Only by determining costs can hospitals strive to contain them.

  20. USE OF INTEGRATED PLANNING TOOLS FOR REVITALIZATION: SMARTE (U.S.) AND START-UP PLAN (GERMANY)

    EPA Science Inventory

    The U.S.-German Bilateral Working Group produced two primary products during Phase 3 (2000-2005). SMARTe (Sustainable Management Approaches and Revitalization Tools-electronic) is being developed in the U.S. and the START-UP Plan is being...

  1. Three-dimensional particle-in-cell simulations of rapid start-up in strapped oven magnetrons due to variation in the insulating magnetic field

    NASA Astrophysics Data System (ADS)

    Luginsland, J. W.; Lau, Y. Y.; Neculaes, V. B.; Gilgenbach, R. M.; Jones, M. C.; Frese, M. H.; Watrous, J. J.

    2004-06-01

    A three-dimensional parallel particle-in-cell code, ICEPIC, is used to simulate the geometry and the magnetic field profiles of the recent low-noise, fast startup magnetron experiments at the University of Michigan. The fast startup, the power levels, and the starting currents that have been observed in these experiments are quantitatively reproduced in the simulations. The tendency for low noise operation has also been reproduced with the use of an azimuthally varying magnetic field.

  2. Startup of the remote laboratory-scale waste-treatment facility

    SciTech Connect

    Knox, C.A.; Siemens, D.H.; Berger, D.N.

    1981-01-01

    The Remote Laboratory-Scale Waste-Treatment Facility was designed as a system to solidify small volumes of radioactive liquid wastes. The objectives in operating this facility are to evaluate solidification processes, determine the effluents generated, test methods for decontaminating the effluents, and provide radioactive solidified waste products for evaluation. The facility consists of a feed-preparation module, a waste-solidification module and an effluent-treatment module. The system was designed for remote installation and operation. Several special features for remotely handling radioactive materials were incorporated into the design. The equipment was initially assembled outside of a radiochemical cell to size and fabricate the connecting jumpers between the modules and to complete some preliminary design-verification tests. The equipment was then disassembled and installed in the radiochemical cell. When installation was completed the entire system was checked out with water and then with a nonradioactive simulated waste solution. The purpose of these operations was to start up the facility, find and solve operational problems, verify operating procedures and train personnel. The major problems experienced during these nonradioactive runs were plugging of the spray calciner nozzle and feed tank pumping failures. When these problems were solved, radioactive operations were started. This report describes the installation of this facility, its special remote design feature and the startup operations.

  3. Evaluation of Neutron Radiography Reactor LEU-Core Start-Up Measurements

    SciTech Connect

    Bess, John D.; Maddock, Thomas L.; Smolinski, Andrew T.; Marshall, Margaret A.

    2014-11-04

    Benchmark models were developed to evaluate the cold-critical start-up measurements performed during the fresh core reload of the Neutron Radiography (NRAD) reactor with Low Enriched Uranium (LEU) fuel. Experiments include criticality, control-rod worth measurements, shutdown margin, and excess reactivity for four core loadings with 56, 60, 62, and 64 fuel elements. The worth of four graphite reflector block assemblies and an empty dry tube used for experiment irradiations were also measured and evaluated for the 60-fuel-element core configuration. Dominant uncertainties in the experimental keff come from uncertainties in the manganese content and impurities in the stainless steel fuel cladding as well as the 236U and erbium poison content in the fuel matrix. Calculations with MCNP5 and ENDF/B-VII.0 neutron nuclear data are approximately 1.4% (9σ) greater than the benchmark model eigenvalues, which is commonly seen in Monte Carlo simulations of other TRIGA reactors. Simulations of the worth measurements are within the 2σ uncertainty for most of the benchmark experiment worth values. The complete benchmark evaluation details are available in the 2014 edition of the International Handbook of Evaluated Reactor Physics Benchmark Experiments.

  4. The startup of coal injection on Bethlehem Steel`s Burns Harbor blast furnaces

    SciTech Connect

    Hill, D.G.; Strayer, T.J.; Durko, D.P.; Dwelly, M.J.

    1996-12-31

    Despite the simplicity of operation and the excellent results from natural gas injection at Bethlehem Steel, there were concerns about future supply and price stability. Furthermore, the maximum projected gas rates still required coke consumption in excess of Burns Harbor`s coke production capacity. Thus in 1990 Bethlehem Steel entered into an agreement to participate in the DOE Clean Coal Technology demonstration project by installing a granular coal injection facility at Burns Harbor. This agreement called for a facility to be constructed which was capable of processing and injecting a wide range of coal types in either granular or pulverized form. Tests were to be conducted to assess the effects of a range of coal properties, coal sizing, and injection rates on a number of key blast furnace parameters. During all the transitioning from natural gas injection to coal injection and subsequent tests it was essential that the blast furnaces maintain their historic operating performance in support of the Burns Harbor Division`s product market requirements. Unlike many coal injection facilities, the Burns Harbor installation is owned by Bethlehem Steel and the operation and maintenance from raw coal unloading through the tuyeres is the responsibility of the Blast Furnace Department. As the authors will discuss, the start-up of this major installation involved significant challenges, the most critical of which was maintaining historically high blast furnace operating standards while commissioning a new facility and adapting the furnace process to coal injection.

  5. Resources for startup and growing businesses in the science and engineering sectors

    NASA Astrophysics Data System (ADS)

    Sabol, Joseph

    2013-03-01

    The American Chemical Society provides resources for members involved in forming startup and growing small businesses in the chemical and related sectors. In particular, the ACS Division of Small Chemical Businesses SCHB provides member benefits, informative programming at national and regional meetings, and networking opportunities for entrepreneurs. SCHB member benefits include listing in a directory of members' products and services, discounted expo booth rental at ACS national meetings, sponsorship to attend ACS leadership development courses, volunteer opportunities to shape and direct SCHB's operations, multiple social networking platforms, and professional networking opportunities with like-minded and similarly situated small business principals. SCHB's mission is ``To aid in the formation, development and growth of small chemical businesses.'' SCHB collaborates with other units in ACS, including local sections, the Chemical Entrepreneurship Council, the Division of Business Development & Management, Entrepreneurial Initiative, and Career Services. SCHB helps chemists gain skills to translate research into commercially successful products; build strong, growing companies that create jobs; and collaborate with professionals outside the chemical community. American Chemical Society, Division of Small Chemical Businesses

  6. Start-up and control method and apparatus for resonant free piston Stirling engine

    DOEpatents

    Walsh, Michael M.

    1984-01-01

    A resonant free-piston Stirling engine having a new and improved start-up and control method and system. A displacer linear electrodynamic machine is provided having an armature secured to and movable with the displacer and having a stator supported by the Stirling engine housing in juxtaposition to the armature. A control excitation circuit is provided for electrically exciting the displacer linear electrodynamic machine with electrical excitation signals having substantially the same frequency as the desired frequency of operation of the Stirling engine. The excitation control circuit is designed so that it selectively and controllably causes the displacer electrodynamic machine to function either as a generator load to extract power from the displacer or the control circuit selectively can be operated to cause the displacer electrodynamic machine to operate as an electric drive motor to apply additional input power to the displacer in addition to the thermodynamic power feedback to the displacer whereby the displacer linear electrodynamic machine also is used in the electric drive motor mode as a means for initially starting the resonant free-piston Stirling engine.

  7. Impedance of an intense plasma-cathode electron source for tokamak startup

    NASA Astrophysics Data System (ADS)

    Hinson, E. T.; Barr, J. L.; Bongard, M. W.; Burke, M. G.; Fonck, R. J.; Perry, J. M.

    2016-05-01

    An impedance model is formulated and tested for the ˜1 kV , 1 kA/cm2 , arc-plasma cathode electron source used for local helicity injection tokamak startup. A double layer sheath is established between the high-density arc plasma ( narc≈1021 m-3 ) within the electron source, and the less dense external tokamak edge plasma ( nedge≈1018 m-3 ) into which current is injected at the applied injector voltage, Vinj . Experiments on the Pegasus spherical tokamak show that the injected current, Iinj , increases with Vinj according to the standard double layer scaling Iinj˜Vinj3 /2 at low current and transitions to Iinj˜Vinj1 /2 at high currents. In this high current regime, sheath expansion and/or space charge neutralization impose limits on the beam density nb˜Iinj/Vinj1 /2 . For low tokamak edge density nedge and high Iinj , the inferred beam density nb is consistent with the requirement nb≤nedge imposed by space-charge neutralization of the beam in the tokamak edge plasma. At sufficient edge density, nb˜narc is observed, consistent with a limit to nb imposed by expansion of the double layer sheath. These results suggest that narc is a viable control actuator for the source impedance.

  8. The sleep apnea cardiovascular endpoints (SAVE) trial: Rationale and start-up phase.

    PubMed

    McEvoy, R Doug; Anderson, Craig S; Antic, Nick A; Chen, Baoyuan; He, Quanying; Heeley, Emma; Huang, Shaoguang; Huang, Yining; Wang, Jiguang; Zhong, Nanshan

    2010-09-01

    THE SLEEP APNEA CARDIOVASCULAR ENDPOINTS (SAVE) STUDY (CLINICAL TRIALS REGISTRATION NUMBER: NCT00738170) is an academic initiated and conducted, multinational, open, blinded endpoint, randomised controlled trial designed to determine whether treatment of obstructive sleep apnea (OSA) with continuous positive airways pressure (CPAP) can reduce the incidence of serious cardiovascular events in patients with established cardiovascular disease. The answer to this question is of major importance to populations undergoing ageing and lifestyle changes all over the world. The SAVE study brings together respiratory, sleep and cardiovascular clinician-scientists in a unique interdisciplinary collaborative effort with industry sponsors to conduct the largest and most ambitious clinical trial yet conducted in the field of sleep apnea, with a global recruitment target of 5000 patients. Following its launch in Australia and China in late 2008, SAVE has now entered a phase of international expansion with new recruitment networks being established in New Zealand, India and Latin America. This article describes the rationale for the SAVE study, the considerations behind its design, and progress thus far in establishing the recruitment network. The report emphasises the important role that Chinese sleep and cardiovascular investigators have played in the start-up phase of this landmark international project.

  9. Evaluation of Neutron Radiography Reactor LEU-Core Start-Up Measurements

    DOE PAGES

    Bess, John D.; Maddock, Thomas L.; Smolinski, Andrew T.; ...

    2014-11-04

    Benchmark models were developed to evaluate the cold-critical start-up measurements performed during the fresh core reload of the Neutron Radiography (NRAD) reactor with Low Enriched Uranium (LEU) fuel. Experiments include criticality, control-rod worth measurements, shutdown margin, and excess reactivity for four core loadings with 56, 60, 62, and 64 fuel elements. The worth of four graphite reflector block assemblies and an empty dry tube used for experiment irradiations were also measured and evaluated for the 60-fuel-element core configuration. Dominant uncertainties in the experimental keff come from uncertainties in the manganese content and impurities in the stainless steel fuel cladding asmore » well as the 236U and erbium poison content in the fuel matrix. Calculations with MCNP5 and ENDF/B-VII.0 neutron nuclear data are approximately 1.4% (9σ) greater than the benchmark model eigenvalues, which is commonly seen in Monte Carlo simulations of other TRIGA reactors. Simulations of the worth measurements are within the 2σ uncertainty for most of the benchmark experiment worth values. The complete benchmark evaluation details are available in the 2014 edition of the International Handbook of Evaluated Reactor Physics Benchmark Experiments.« less

  10. Solenoid-free Plasma Startup in NSTX using Coaxial Helicity Injection

    SciTech Connect

    Roger Raman; Thomas R. Jarboe; Michael G. Bell; Dennis Mueller; Brian A. Nelson; Benoit LeBlanc; Charles Bush; Masayoshi Nagata; Ted Biewer

    2005-01-03

    The favorable properties of the Spherical Torus (ST) arise from its very small aspect ratio. However, small aspect ratio devices have very restricted space for a substantial central solenoid. Thus methods for initiating the plasma current without relying on induction from a central solenoid are essential for the viability of the ST concept. Coaxial Helicity Injection (CHI) is a promising candidate for solenoid-free plasma startup in a ST. Recent experiments on the HIT-II ST at the University of Washington, have demonstrated the capability of a new method, referred to as transient CHI, to produce a high quality, closed-flux equilibrium that has then been coupled to induction, with a reduced requirement for transformer flux [R. Raman, T.R. Jarboe, B.A. Nelson, et al., Phys. Rev. Lett. 90 (February 2003) 075005-1]. An initial test of this method on the National Spherical Torus Experiment (NSTX) has produced about 140 kA of toroidal current. Modifications are now underway to improve capability for transient CHI in NSTX.

  11. Inductive current startup in large tokamaks with expanding minor radius and rf assist

    SciTech Connect

    Borowski, S.K.

    1984-02-01

    Auxiliary rf heating of electrons before and during the current-rise phase of a large tokamak, such as the Fusion Engineering Device (R = 4.8 m, a = 1.3 m, sigma = 1.6, B/sub T/ = 3.62 T), is examined as a means of reducing both the initiation loop voltage and resistive flux expenditure during startup. Prior to current initiation, 1 to 2 MW of electron cyclotron resonance heating power at approx. 90 GHz is used to create a small volume of high conductivity plasma (T/sub e/ approx. = 100 eV, n/sub e/ approx. = 10/sup 19/ m/sup -3/) near the upper hybrid resonance (UHR) region. This plasma conditioning permits a small radius (a/sub 0/ approx. = 0.2 to 0.4 m) current channel to be established with a relatively low initial loop voltage (less than or equal to 25 V as opposed to approx. 100 V without rf assist). During the subsequent plasma expansion and current ramp phase, a combination of rf heating (up to 5 MW) and current profile control leads to a substantial savings in volt-seconds by: (1) minimizing the resistive flux consumption; and (2) maintaining the internal flux at or near the flat profile limit.

  12. Start-up experience at the Robbins Resource Recovery Facility while focusing on the environment

    SciTech Connect

    Studley, B.C.; Moyer, R.H.

    1997-12-01

    In early November, 1996, a new generation of advanced combustion technology using circulating fluidized bed (CFB) boilers began continuous operation in Robbins, Illinois, a suburb of Chicago. The Robbins Waste-to-Energy and Recycling Facility processes a minimum of 1,600 Tons-per-day of Municipal Solid Waste. Approximately 400 tons-per-day of waste will be recycled with the remaining 1200 tons fed to one of two 600 ton-per-day circulating fluidized bed steam generating units. The Robbins Facility is designed and operates with the most advanced pollution control equipment. Foster Wheeler and facility personnel, in conjunction with the Illinois Environmental Protection Agency and Cook County Department of Environmental Control, have undertaken a number of programs to optimize environmental performance at the facility, including an on-going, aggressive ambient air monitoring program using a chemical mass balance model and ambient air mercury testing. This paper provides an overview of the design, approach to start-up, actual experiences to date, and the overall operations of the Robbins Facility with emphasis on the monitoring programs and environmental controls.

  13. International Space Station Nickel-Hydrogen Battery Start-Up and Initial Performance

    NASA Technical Reports Server (NTRS)

    Cohen, Fred; Dalton, Penni J.

    2001-01-01

    International Space Station (ISS) Electric Power System (EPS) utilizes Nickel-Hydrogen (Ni-H2) batteries as part of its power system to store electrical energy. The batteries are charged during insolation and discharged during eclipse. The batteries are designed to operate at a 35% depth of discharge (DOD) maximum during normal operation. Thirty eight individual pressure vessel (IPV) Ni-H2 battery cells are series-connected and packaged in an Orbital Replacement Unit (ORU). Two ORUs are series-connected utilizing a total of 76 cells, to form one battery. The ISS is the first application for low earth orbit (LEO) cycling of this quantity of series-connected cells. The P6 Integrated Equipment Assembly (IEA) containing the initial ISS high-power components was successfully launched on November 30, 2000. The IEA contains 12 Battery Subassembly ORUs (6 batteries) that provide station power during eclipse periods. This paper will describe the battery hardware configuration, operation, and role in providing power to the main power system of the ISS. We will also discuss initial battery start-up and performance data.

  14. Impedance of an intense plasma-cathode electron source for tokamak startup

    DOE PAGES

    Hinson, Edward Thomas; Barr, Jayson L.; Bongard, Michael W.; ...

    2016-05-31

    In this study, an impedance model is formulated and tested for the ~1kV, ~1kA/cm2, arc-plasma cathode electron source used for local helicity injection tokamak startup. A double layer sheath is established between the high-density arc plasma (narc ≈ 1021 m-3) within the electron source, and the less dense external tokamak edge plasma (nedge ≈ 1018 m-3) into which current is injected at the applied injector voltage, Vinj. Experiments on the Pegasus spherical tokamak show the injected current, Iinj, increases with Vinj according to the standard double layer scaling Iinj ~ Vinj3/2 at low current and transitions to Iinj ~ Vinj1/2more » at high currents. In this high current regime, sheath expansion and/or space charge neutralization impose limits on the beam density nb ~ Iinj/Vinj1/2. For low tokamak edge density nedge and high Iinj, the inferred beam density nb is consistent with the requirement nb ≤ nedge imposed by space-charge neutralization of the beam in the tokamak edge plasma. At sufficient edge density, nb ~ narc is observed, consistent with a limit to nb imposed by expansion of the double layer sheath. These results suggest that narc is a viable control actuator for the source impedance.« less

  15. Fractional pressure measurements in the W7-X startup phase with a spectroscopically assisted Penning gauge

    NASA Astrophysics Data System (ADS)

    Kremeyer, Thierry; Schmitz, Oliver; Wenzel, Uwe; Flesch, Kurt; W7-X Team

    2016-10-01

    Studies of helium exhaust from stellarator divertors is important to qualify for maintaining low overall helium concentrations for future reactors. Penning gauges assisted by spectroscopy were used to measure total neutral pressure and to resolve the D and He partial pressures. A similar system was installed on an outboard vacuum flange as a generic feasibility test for W7-X. In this contribution, initial results from the W7-X startup phase are shown. A compact CCD spectrometer with a range from 500 to 1000 nm was used to observe the Penning discharge. With a long integration time of 25s, He lines can be seen down to 10-5 mbar and Hα lines down to 10-6 mbar. The impact of He cleaning discharges on the in-situ neutral gas spectrum was measured and will be discussed in comparison to the mass spectrometers on the device. This initial test is the basis for developing optimized Penning gauges, which will be deployed to measure the D/He pressure ratios inside of the island divertor. The status of this development will be discussed. This work was funded in part by the Department of Energy under Grants DE-SC0012315 and DE-SC0014210 and from EUROfusion under Grant No 633053.

  16. A solenoid-free current start-up scenario utilizing outer poloidal field coils*

    NASA Astrophysics Data System (ADS)

    Choe, W.; Kim, J.; Ono, M.; Menard, J.; Neumeyer, C.; Wilson, J. R.

    2004-11-01

    Elimination of the in-board solenoid is not only required for the spherical torus reactors but would also be desirable for advanced tokamak reactors. The challenge for using only the outer PF coils for start-up is the difficulty of creating a sufficiently high quality field null region while retaining the poloidal flux needed for current ramp-up. It is shown that a few pairs of PF coils can provide a field null for a few ms with a large region of low transverse field in which an ionization avalanche can develop in the applied toroidal E-field with the aid of strong pre-ionization. Preliminary experimental and modeling work has been performed on NSTX aimed at quantifying the field null requirements in terms of the Lloyd parameter, the null size and its duration, while optimizing the loop voltage and the available flux. Different combinations of PF coils were used to investigate the relationship between the size of the region where E_TB_T/BP = 0.1 kV/m and the breakdown. Fast camera and magnetic diagnostics clearly show plasma initiation for several ms. The vacuum field patterns and flux surfaces of the generated plasma and analysis of the plasma evolution with the DINA code will be presented. *This work supported by KAIST and DoE Contract No. DE-AC02-76CH03073.

  17. Inductive plasma current start-up by the outer vertical field coil in a spherical tokamak

    NASA Astrophysics Data System (ADS)

    Mitarai, Osamu

    1999-12-01

    Plasma current-start up induced by an outer vertical field coil is studied during the ignition access phase in a spherical tokamak reactor. We have illustrated the concept that the plasma current of ~50 MA could be induced by the outer vertical field coil in the proposed spherical tokamak with the help of the small central solenoid flux of +/-5 V s and the strong heating power less than 100 MW for the internal inductance of icons/Journals/Common/ell" ALT="ell" ALIGN="TOP"/>i~0.4-0.8 without the help of bootstrap current and non-inductive current drive power. The required condition to achieve this operation scenario is that the flux produced by the equilibrium vertical field is larger than the inductive flux. Current start-up operation is achieved by adding the small ohmic heating solenoid flux for the flux waveform adjustment because the flux from the outer vertical field coil cannot solely induce the desired plasma current waveform in the case of the preprogramming of the heating power.

  18. Start-up of two moving bed membrane bioreactors treating saline wastewater contaminated by hydrocarbons.

    PubMed

    Campo, R; Di Prima, N; Freni, G; Giustra, M G; Di Bella, G

    2016-01-01

    This work aims to assess the acclimation of microorganisms to a gradual increase of salinity and hydrocarbons, during the start-up of two moving bed membrane bioreactors (MB-MBRs) fed with saline oily wastewater. In both systems an ultrafiltration membrane was used and two types of carriers were employed: polyurethane sponge cubes (MB-MBRI) and polyethylene cylindrical carriers (MB-MBRII). A decreasing dilution factor of slops has been adopted in order to allow biomass acclimation. The simultaneous effect of salinity and hydrocarbons played an inhibitory role in biomass growth and this resulted in a decrease of the biological removal efficiencies. A reduction of bound extracellular polymeric substances and a simultaneous release of soluble microbial products (SMPs) were observed, particularly in the MB-MBRII system, probably due to the occurrence of a greater suspended biomass stress as response to the recalcitrance of substrate. On the one hand, a clear attachment of biomass occurred only in MB-MBRI and this affected the fouling deposition on the membrane surface. The processes of detachment and entrapment of biomass, from and into the carriers, significantly influenced the superficial cake deposition and its reversibility. On the other hand, in MB-MBRII, the higher production of SMPs implied a predominance of the pore blocking.

  19. Efficient ECH-assisted plasma start-up using trapped particle configuration in the versatile experiment spherical torus

    NASA Astrophysics Data System (ADS)

    An, YoungHwa; Lee, Jeongwon; Jo, JongGab; Jung, Bong-Ki; Lee, HyunYeong; Chung, Kyoung-Jae; Na, Yong-Su; Hahm, T. S.; Hwang, Y. S.

    2017-01-01

    An efficient and robust ECH (electron cyclotron heating)-assisted plasma start-up scheme with a low loop voltage and low volt-second consumption utilizing the trapped particle configuration (TPC) has been developed in the versatile experiment spherical torus (VEST). The TPC is a mirror-like magnetic field configuration providing a vertical magnetic field in the same direction as the equilibrium field. It significantly enhances ECH pre-ionization with enhanced particle confinement due to its mirror effect, and intrinsically provides an equilibrium field with a stable decay index enabling prompt plasma current initiation. Consequently, the formation of TPC before the onset of the loop voltage allows the plasma to start up with a lower loop voltage and lower volt-second consumption as well as a wider operation range in terms of ECH pre-ionization power and H2 filling pressure. The TPC can improve the widely-used field null configuration significantly for more efficient start-up when ECH pre-ionization is used. This can then be utilized in superconducting tokamaks requiring a low loop voltage start-up, such as ITER, or in spherical tori with limited volt-seconds. The TPC can be particularly useful in superconducting tokamaks with a limited current slew-rate of superconducting PF coils, as it can save volt-second consumption before plasma current initiation by providing prompt initiation with an intrinsic stable equilibrium field.

  20. Toward Understanding the Molecular Bases of Stretch Activation

    PubMed Central

    Sanfelice, Domenico; Sanz-Hernández, Máximo; de Simone, Alfonso; Bullard, Belinda; Pastore, Annalisa

    2016-01-01

    Muscles are usually activated by calcium binding to the calcium sensory protein troponin-C, which is one of the three components of the troponin complex. However, in cardiac and insect flight muscle activation is also produced by mechanical stress. Little is known about the molecular bases of this calcium-independent activation. In Lethocerus, a giant water bug often used as a model system because of its large muscle fibers, there are two troponin-C isoforms, called F1 and F2, that have distinct roles in activating the muscle. It has been suggested that this can be explained either by differences in structural features or by differences in the interactions with other proteins. Here we have compared the structural and dynamic properties of the two proteins and shown how they differ. We have also mapped the interactions of the F2 isoform with peptides spanning the sequence of its natural partner, troponin-I. Our data have allowed us to build a model of the troponin complex and may eventually help in understanding the specialized function of the F1 and F2 isoforms and the molecular mechanism of stretch activation. PMID:27226601

  1. Motor Cortex Microcircuit Simulation Based on Brain Activity Mapping

    PubMed Central

    Chadderdon, George L.; Mohan, Ashutosh; Suter, Benjamin A.; Neymotin, Samuel A.; Kerr, Cliff C.; Francis, Joseph T.; Shepherd, Gordon M. G.; Lytton, William W.

    2016-01-01

    The deceptively simple laminar structure of neocortex belies the complexity of intra- and interlaminar connectivity. We developed a computational model based primarily on a unified set of brain activity mapping studies of mouse M1. The simulation consisted of 775 spiking neurons of 10 cell types with detailed population-to-population connectivity. Static analysis of connectivity with graph-theoretic tools revealed that the corticostriatal population showed strong centrality, suggesting that would provide a network hub. Subsequent dynamical analysis confirmed this observation, in addition to revealing network dynamics that cannot be readily predicted through analysis of the wiring diagram alone. Activation thresholds depended on the stimulated layer. Low stimulation produced transient activation, while stronger activation produced sustained oscillations where the threshold for sustained responses varied by layer: 13% in layer 2/3, 54% in layer 5A, 25% in layer 5B, and 17% in layer 6. The frequency and phase of the resulting oscillation also depended on stimulation layer. By demonstrating the effectiveness of combined static and dynamic analysis, our results show how static brain maps can be related to the results of brain activity mapping. PMID:24708371

  2. Dynamic positioning system based on active disturbance rejection technology

    NASA Astrophysics Data System (ADS)

    Lei, Zhengling; Guo, Chen; Fan, Yunsheng

    2015-08-01

    A dynamically positioned vessel, by the International Maritime Organization (IMO) and the certifying class societies (DNV, ABS, LR, etc.), is defined as a vessel that maintains its position and heading (fixed location or pre-determined track) exclusively by means of active thrusters. The development of control technology promotes the upgrading of dynamic positioning (DP) systems. Today there are two different DP systems solutions available on the market: DP system based on PID regulator and that based on model-based control. Both systems have limited disturbance rejection capability due to their design principle. In this paper, a new DP system solution is proposed based on Active Disturbance Rejection Control (ADRC) technology. This technology is composed of Tracking-Differentiator (TD), Extended State Observer (ESO) and Nonlinear Feedback Combination. On one hand, both TD and ESO can act as filters and can be used in place of conventional filters; on the other hand, the total disturbance of the system can be estimated and compensated by ESO, which therefore enhances the system's disturbance rejection capability. This technology's advantages over other methods lie in two aspects: 1) This method itself can not only achieve control objectives but also filter noisy measurements without other specialized filters; 2) This method offers a new useful approach to suppress the ocean disturbance. The simulation results demonstrate the effectiveness of the proposed method.

  3. Synthesis of novel bisindolylmethane Schiff bases and their antibacterial activity.

    PubMed

    Imran, Syahrul; Taha, Muhammad; Ismail, Nor Hadiani; Khan, Khalid Mohammed; Naz, Farzana; Hussain, Memona; Tauseef, Saima

    2014-08-06

    In an effort to develop new antibacterial drugs, some novel bisindolylmethane derivatives containing Schiff base moieties were prepared and screened for their antibacterial activity. The synthesis of the bisindolylmethane Schiff base derivatives 3-26 was carried out in three steps. First, the nitro group of 3,3'-((4-nitrophenyl)-methylene)bis(1H-indole) (1) was reduced to give the amino substituted bisindolylmethane 2 without affecting the unsaturation of the bisindolylmethane moiety using nickel boride in situ generated. Reduction of compound 1 using various catalysts showed that combination of sodium borohydride and nickel acetate provides the highest yield for compound 2. Bisindolylmethane Schiff base derivatives were synthesized by coupling various benzaldehydes with amino substituted bisindolylmethane 2. All synthesized compounds were characterized by various spectroscopic methods. The bisindolylmethane Schiff base derivatives were evaluated against selected Gram-positive and Gram-negative bacterial strains. Derivatives having halogen and nitro substituent display weak to moderate antibacterial activity against Salmonella typhi, S. paratyphi A and S. paratyphi B.

  4. Predicting Monoamine Oxidase Inhibitory Activity through Ligand-Based Models

    PubMed Central

    Vilar, Santiago; Ferino, Giulio; Quezada, Elias; Santana, Lourdes; Friedman, Carol

    2013-01-01

    The evolution of bio- and cheminformatics associated with the development of specialized software and increasing computer power has produced a great interest in theoretical in silico methods applied in drug rational design. These techniques apply the concept that “similar molecules have similar biological properties” that has been exploited in Medicinal Chemistry for years to design new molecules with desirable pharmacological profiles. Ligand-based methods are not dependent on receptor structural data and take into account two and three-dimensional molecular properties to assess similarity of new compounds in regards to the set of molecules with the biological property under study. Depending on the complexity of the calculation, there are different types of ligand-based methods, such as QSAR (Quantitative Structure-Activity Relationship) with 2D and 3D descriptors, CoMFA (Comparative Molecular Field Analysis) or pharmacophoric approaches. This work provides a description of a series of ligand-based models applied in the prediction of the inhibitory activity of monoamine oxidase (MAO) enzymes. The controlled regulation of the enzymes’ function through the use of MAO inhibitors is used as a treatment in many psychiatric and neurological disorders, such as depression, anxiety, Alzheimer’s and Parkinson’s disease. For this reason, multiple scaffolds, such as substituted coumarins, indolylmethylamine or pyridazine derivatives were synthesized and assayed toward MAO-A and MAO-B inhibition. Our intention is to focus on the description of ligand-based models to provide new insights in the relationship between the MAO inhibitory activity and the molecular structure of the different inhibitors, and further study enzyme selectivity and possible mechanisms of action. PMID:23231398

  5. Quench Protection System based on Active Power Method

    NASA Astrophysics Data System (ADS)

    Nanato, Nozomu

    In superconducting coils, local and excessive joule heating may give damage to the superconducting windings when a quench occurs and therefore it is essential that the quench is detected quickly and precisely so that the coils can be safely discharged. We have presented a quench protection system based on the active power method which detects a quench by measuring the instantaneous active power generated in a superconducting coil. The protection system based on this method is strong against the inductive voltage and noise which may cause insufficient quench recognition. However, the proposed system is useful for a single coil but it is vulnerable to the magnetically coupled multi-coil such as high field superconducting coils. Because the proposed system can not avoid insufficient quench recognition by the mutual inductive voltage from the other coils. This paper presents a method to improve the characteristics of the active power method by cancelling the mutual inductive voltage. The experimental results of the quench protection for small Bi2223 coils show that the proposed system is useful for the magnetically coupled coils.

  6. FRET-based optical assay for monitoring riboswitch activation.

    PubMed

    Harbaugh, Svetlana; Kelley-Loughnane, Nancy; Davidson, Molly; Narayanan, Latha; Trott, Sandra; Chushak, Yaroslav G; Stone, Morley O

    2009-05-11

    Riboswitches are regulatory RNAs located in the 5'-untranslated region of mRNA sequences that recognize and bind to small molecules and regulate the expression of downstream genes. Creation of synthetic riboswitches to novel ligands depends on the ability to monitor riboswitch activation in the presence of analyte. In our work, we have coupled a synthetic riboswitch to an optical reporter assay based on fluorescence resonance energy transfer (FRET) between two genetically encoded fluorescent proteins. The theophylline-sensitive riboswitch was placed upstream of the Tobacco Etch Virus (TEV) protease coding sequence. Our FRET construct was composed of eGFP and a nonfluorescent yellow fluorescent protein mutant called REACh (for resonance energy-accepting chromoprotein) connected with a peptide linker containing a TEV protease cleavage site. Addition of theophylline to the E. coli cells activates the riboswitch and initiates the translation of mRNA. Synthesized protease cleaves the linker in the FRET-based fusion protein causing a change in the fluorescence signal. By this method, we observed an 11-fold increase in cellular extract fluorescence in the presence of theophylline. The advantage of using an eGFP-REACh pair is the elimination of acceptor fluorescence. This leads to an improved detection of FRET via better signal-to-noise ratio, allowing us to monitor riboswitch activation in a wide range of analyte concentrations from 0.01 to 2.5 mM.

  7. Enzymatic assay for calmodulins based on plant NAD kinase activity

    SciTech Connect

    Harmon, A.C.; Jarrett, H.W.; Cormier, M.J.

    1984-01-01

    NAD kinase with increased sensitivity to calmodulin was purified from pea seedlings (Pisum sativum L., Willet Wonder). Assays for calmodulin based on the activities of NAD kinase, bovine brain cyclic nucleotide phosphodiesterase, and human erythrocyte Ca/sup 2 -/-ATPase were compared for their sensitivities to calmodulin and for their abilities to discriminate between calmodulins from different sources. The activities of the three enzymes were determined in the presence of various concentrations of calmodulins from human erythrocyte, bovine brain, sea pansy (Renilla reniformis), mung bean seed (Vigna radiata L. Wilczek), mushroom (Agaricus bisporus), and Tetrahymena pyriformis. The concentrations of calmodulin required for 50% activation of the NAD kinase (K/sub 0.5/) ranged from 0.520 ng/ml for Tetrahymena to 2.20 ng/ml for bovine brain. The A/sub 0.5/ s ranged from 19.6 ng/ml for bovine brain calmodulin to 73.5 ng/ml for mushroom calmodulin for phosphodiesterase activation. The K/sub 0.5/'s for the activation of Ca/sup 2 +/-ATPase ranged from 36.3 ng/mol for erythrocyte calmodulin to 61.7 ng/ml for mushroom calmodulin. NAD kinase was not stimulated by phosphatidylcholine, phosphatidylserine, cardiolipin, or palmitoleic acid in the absence or presence of Ca/sup 2 +/. Palmitic acid had a slightly stimulatory effect in the presence of Ca/sup 2 +/ (10% of maximum), but no effect in the absence of Ca/sup 2 +/. Palmitoleic acid inhibited the calmodulin-stimulated activity by 50%. Both the NAD kinase assay and radioimmunoassay were able to detect calmodulin in extracts containing low concentrations of calmodulin. Estimates of calmodulin contents of crude homogenates determined by the NAD kinase assay were consistent with amounts obtained by various purification procedures. 30 references, 1 figure, 4 tables.

  8. Improved Active Harmonic Current Elimination Based on Voltage Detection.

    PubMed

    Tan, Tianyuan; Dong, Shuan; Huang, Yingwei; Liu, Jian; Le, Jian; Liu, Kaipei

    2016-01-01

    With the increasing penetration of power electronic equipment in modern residential distribution systems, harmonics mitigation through the distributed generation (DG) interfacing converters has received significant attention. Among recently proposed methods, the so-called active resonance damper (ARD) and harmonic voltage compensator (HVC) based on voltage detection can effectively reduce the harmonic distortions in selected areas of distribution systems. However, it is found out that when traditional ARD algorithm is used to eliminate harmonic current injected by non-linear loads, its performance is constrained by stability problems and can at most eliminate half of the load harmonic currents. Thus, inspired by the duality between ARD and HVC, this paper presents a novel improved resistive active power filter (R-APF) algorithm based on integral-decoupling control. The design guideline for its parameters is then investigated through carefully analyzing the closed-loop poles' trajectory. Computer studies demonstrate that the proposed algorithm can effectively mitigate the load harmonic currents and its performance is much better than traditional ARD based on proportional control.

  9. Improved Active Harmonic Current Elimination Based on Voltage Detection

    PubMed Central

    Tan, Tianyuan; Dong, Shuan; Huang, Yingwei; Liu, Jian; Le, Jian; Liu, Kaipei

    2016-01-01

    With the increasing penetration of power electronic equipment in modern residential distribution systems, harmonics mitigation through the distributed generation (DG) interfacing converters has received significant attention. Among recently proposed methods, the so-called active resonance damper (ARD) and harmonic voltage compensator (HVC) based on voltage detection can effectively reduce the harmonic distortions in selected areas of distribution systems. However, it is found out that when traditional ARD algorithm is used to eliminate harmonic current injected by non-linear loads, its performance is constrained by stability problems and can at most eliminate half of the load harmonic currents. Thus, inspired by the duality between ARD and HVC, this paper presents a novel improved resistive active power filter (R-APF) algorithm based on integral-decoupling control. The design guideline for its parameters is then investigated through carefully analyzing the closed-loop poles’ trajectory. Computer studies demonstrate that the proposed algorithm can effectively mitigate the load harmonic currents and its performance is much better than traditional ARD based on proportional control. PMID:27295213

  10. Research-based active-learning instruction in physics

    NASA Astrophysics Data System (ADS)

    Meltzer, David E.; Thornton, Ronald K.

    2013-04-01

    The development of research-based active-learning instructional methods in physics has significantly altered the landscape of U.S. physics education during the past 20 years. Based on a recent review [D.E. Meltzer and R.K. Thornton, Am. J. Phys. 80, 478 (2012)], we define these methods as those (1) explicitly based on research in the learning and teaching of physics, (2) that incorporate classroom and/or laboratory activities that require students to express their thinking through speaking, writing, or other actions that go beyond listening and the copying of notes, or execution of prescribed procedures, and (3) that have been tested repeatedly in actual classroom settings and have yielded objective evidence of improved student learning. We describe some key features common to methods in current use. These features focus on (a) recognizing and addressing students' physics ideas, and (b) guiding students to solve problems in realistic physical settings, in novel and diverse contexts, and to justify or explain the reasoning they have used.

  11. Synchronization-based approach for detecting functional activation of brain

    NASA Astrophysics Data System (ADS)

    Hong, Lei; Cai, Shi-Min; Zhang, Jie; Zhuo, Zhao; Fu, Zhong-Qian; Zhou, Pei-Ling

    2012-09-01

    In this paper, we investigate a synchronization-based, data-driven clustering approach for the analysis of functional magnetic resonance imaging (fMRI) data, and specifically for detecting functional activation from fMRI data. We first define a new measure of similarity between all pairs of data points (i.e., time series of voxels) integrating both complete phase synchronization and amplitude correlation. These pairwise similarities are taken as the coupling between a set of Kuramoto oscillators, which in turn evolve according to a nearest-neighbor rule. As the network evolves, similar data points naturally synchronize with each other, and distinct clusters will emerge. The clustering behavior of the interaction network of the coupled oscillators, therefore, mirrors the clustering property of the original multiple time series. The clustered regions whose cross-correlation coefficients are much greater than other regions are considered as the functionally activated brain regions. The analysis of fMRI data in auditory and visual areas shows that the recognized brain functional activations are in complete correspondence with those from the general linear model of statistical parametric mapping, but with a significantly lower time complexity. We further compare our results with those from traditional K-means approach, and find that our new clustering approach can distinguish between different response patterns more accurately and efficiently than the K-means approach, and therefore more suitable in detecting functional activation from event-related experimental fMRI data.

  12. Interfacial activation-based molecular bioimprinting of lipolytic enzymes.

    PubMed Central

    Mingarro, I; Abad, C; Braco, L

    1995-01-01

    Interfacial activation-based molecular (bio)-imprinting (IAMI) has been developed to rationally improve the performance of lipolytic enzymes in nonaqueous environments. The strategy combinedly exploits (i) the known dramatic enhancement of the protein conformational rigidity in a water-restricted milieu and (ii) the reported conformational changes associated with the activation of these enzymes at lipid-water interfaces, which basically involves an increased substrate accessibility to the active site and/or an induction of a more competent catalytic machinery. Six model enzymes have been assayed in several model reactions in nonaqueous media. The results, rationalized in light of the present biochemical and structural knowledge, show that the IAMI approach represents a straightforward, versatile method to generate manageable, activated (kinetically trapped) forms of lipolytic enzymes, providing under optimal conditions nonaqueous rate enhancements of up to two orders of magnitude. It is also shown that imprintability of lipolytic enzymes depends not only on the nature of the enzyme but also on the "quality" of the interface used as the template. PMID:7724558

  13. Interfacial activation-based molecular bioimprinting of lipolytic enzymes.

    PubMed

    Mingarro, I; Abad, C; Braco, L

    1995-04-11

    Interfacial activation-based molecular (bio)-imprinting (IAMI) has been developed to rationally improve the performance of lipolytic enzymes in nonaqueous environments. The strategy combinedly exploits (i) the known dramatic enhancement of the protein conformational rigidity in a water-restricted milieu and (ii) the reported conformational changes associated with the activation of these enzymes at lipid-water interfaces, which basically involves an increased substrate accessibility to the active site and/or an induction of a more competent catalytic machinery. Six model enzymes have been assayed in several model reactions in nonaqueous media. The results, rationalized in light of the present biochemical and structural knowledge, show that the IAMI approach represents a straightforward, versatile method to generate manageable, activated (kinetically trapped) forms of lipolytic enzymes, providing under optimal conditions nonaqueous rate enhancements of up to two orders of magnitude. It is also shown that imprintability of lipolytic enzymes depends not only on the nature of the enzyme but also on the "quality" of the interface used as the template.

  14. Anammox moving bed biofilm reactor pilot at the 26th Ward wastewater treatment plants in Brooklyn, New York: start-up, biofilm population diversity and performance optimization.

    PubMed

    Mehrdad, M; Park, H; Ramalingam, K; Fillos, J; Beckmann, K; Deur, A; Chandran, K

    2014-01-01

    New York City Environmental Protection in conjunction with City College of New York assessed the application of the anammox process in the reject water treatment using a moving bed biofilm reactor (MBBR) located at the 26th Ward wastewater treatment plant, in Brooklyn, NY. The single-stage nitritation/anammox MBBR was seeded with activated sludge and consequently was enriched with its own 'homegrown' anammox bacteria (AMX). Objectives of this study included collection of additional process kinetic and operating data and assessment of the effect of nitrogen loading rates on process performance. The initial target total inorganic nitrogen removal of 70% was limited by the low alkalinity concentration available in the influent reject water. Higher removals were achieved after supplementing the alkalinity by adding sodium hydroxide. Throughout startup and process optimization, quantitative real-time polymerase chain reaction (qPCR) analyses were used for monitoring the relevant species enriched in the biofilm and in the suspension. Maximum nitrogen removal rate was achieved by stimulating the growth of a thick biofilm on the carriers, and controlling the concentration of dissolved oxygen in the bulk flow and the nitrogen loading rates per surface area; all three appear to have contributed in suppressing nitrite-oxidizing bacteria activity while enriching AMX density within the biofilm.

  15. Active, LCoS based laser interferometer for microelements studies

    NASA Astrophysics Data System (ADS)

    Kacperski, Jacek; Kujawinska, Malgorzata

    2006-10-01

    The modification of classical Twyman-Green interferometer by implementation of Liquid Crystal on Silicon (LCoS) spatial light modulator as the reference mirror allows introducing arbitrary phase in the reference wavefront. This special capability is applied to facilitate the measurements of shape and deformation of active microelements and extend the range of such measurement. This can be realized by introducing linear or circular spatial carrier frequency into interferogram or by compensating object wavefront deformation. Moreover LCoS display can be used as an accurate phase shifter if the proper calibration is introduced. The analysis of sources of measurement errors introduced by LCoS display is presented and the ways of their elimination are discussed. The possible application of LCoS based laser interferometer for initial microelement shape determination and transient deformation monitoring as well as active reference phase modification are shown and experimentally confirmed during silicon micromembranes studies.

  16. Active, LCoS based laser interferometer for microelements studies.

    PubMed

    Kacperski, Jacek; Kujawinska, Malgorzata

    2006-10-16

    The modification of classical Twyman-Green interferometer by implementation of Liquid Crystal on Silicon (LCoS) spatial light modulator as the reference mirror allows introducing arbitrary phase in the reference wavefront. This special capability is applied to facilitate the measurements of shape and deformation of active microelements and extend the range of such measurement. This can be realized by introducing linear or circular spatial carrier frequency into interferogram or by compensating object wavefront deformation. Moreover LCoS display can be used as an accurate phase shifter if the proper calibration is introduced. The analysis of sources of measurement errors introduced by LCoS display is presented and the ways of their elimination are discussed. The possible application of LCoS based laser interferometer for initial microelement shape determination and transient deformation monitoring as well as active reference phase modification are shown and experimentally confirmed during silicon micromembranes studies.

  17. In vitro antimicrobial activity of peroxide-based bleaching agents.

    PubMed

    Napimoga, Marcelo Henrique; de Oliveira, Rogério; Reis, André Figueiredo; Gonçalves, Reginaldo Bruno; Giannini, Marcelo

    2007-06-01

    Antibacterial activity of 4 commercial bleaching agents (Day White, Colgate Platinum, Whiteness 10% and 16%) on 6 oral pathogens (Streptococcus mutans, Streptococcus sobrinus, Streptococcus sanguinis, Candida albicans, Lactobacillus casei, and Lactobacillus acidophilus) and Staphylococcus aureus were evaluated. A chlorhexidine solution was used as a positive control, while distilled water was the negative control. Bleaching agents and control materials were inserted in sterilized stainless-steel cylinders that were positioned under inoculated agar plate (n = 4). After incubation according to the appropriate period of time for each microorganism, the inhibition zones were measured. Data were analyzed by 2-way analysis of variance and Tukey test (a = 0.05). All bleaching agents and the chlorhexidine solution produced antibacterial inhibition zones. Antimicrobial activity was dependent on peroxide-based bleaching agents. For most microorganisms evaluated, bleaching agents produced inhibition zones similar to or larger than that observed for chlorhexidine. C albicans, L casei, and L acidophilus were the most resistant microorganisms.

  18. Fluorescence lifetime based characterization of active and tunable plasmonic nanostructures.

    PubMed

    Ashry, Islam; Zhang, Baigang; Khalifa, Moataz B; Calderone, Joseph A; Santos, Webster L; Heflin, James R; Robinson, Hans D; Xu, Yong

    2014-08-25

    We report a non-contact method that utilizes fluorescence lifetime (FL) to characterize morphological changes of a tunable plasmonic nanostructure with nanoscale accuracy. The key component of the plasmonic nanostructure is pH-responsive polyelectrolyte multilayers (PEMs), which serve as a dynamically tunable "spacer" layer that separates the plasmonic structure and the fluorescent materials. The validity of our method is confirmed through direct comparison with ellipsometry and atomic force microscopy (AFM) measurements. Applying the FL-based approach, we find that a monolayer polycation film responds to pH changes with significantly less hysteresis than a thicker multilayer film with polyelectrolytes of both charges. Additionally, we characterize an active and tunable plasmonic nanostructure composed of self-assembled fluorescent dye (Texas Red), pH-sensitive PEMs, and gold nanospheres adsorbed on the PEM surface. Our results point towards the possibility of using stimulus-sensitive polymers to construct active and tunable plasmonic nanodevices.

  19. Synthesis, characterization and biological activity of Schiff bases based on chitosan and arylpyrazole moiety.

    PubMed

    Salama, Hend E; Saad, Gamal R; Sabaa, Magdy W

    2015-08-01

    The Schiff bases of chitosan were synthesized by the reaction of chitosan with 3-(4-substituted-phenyl)-1-phenyl-1H-pyrazole-4-carbaldehyde. The structure of the prepared chitosan derivatives was characterized by FT-IR spectroscopy, elemental analysis, and X-ray diffraction studies and thermogravimetric analysis (TG). The results show that the specific properties of Schiff bases of chitosan can be altered by modifying the molecular structures with proper substituent groups.TG results reveal that the thermal stability of the prepared chitosan Schiff bases was lower than chitosan. The activation energy of decomposition was calculated using Coats-Redfern model. The antimicrobial activity of chitosan and Schiff bases of chitosan were investigated against Streptococcus pneumonia, Bacillis subtilis, Escherichia coli (as examples of bacteria) and Aspergillus fumigatus, Geotricum candidum and Syncephalastrum recemosum (as examples of fungi). The results indicated that the antimicrobial activity of the Schiff bases was stronger than that of chitosan and was dependent on the substituent group. The activity of un-substituted arylpyrazole chitosan derivative toward the investigated bacteria and fungi species was better than the other derivatives.

  20. Pattern matching based active optical sorting of colloids/cells

    NASA Astrophysics Data System (ADS)

    Verma, R. S.; Dasgupta, R.; Ahlawat, S.; Kumar, N.; Uppal, A.; Gupta, P. K.

    2013-08-01

    We report active optical sorting of colloids/cells by employing a cross correlation based pattern matching technique for selection of the desired objects and thereafter sorting using dynamically controllable holographic optical traps. The problem of possible collision between the different sets of objects during sorting was avoided by raising one set of particles to a different plane. We also present the results obtained on using this approach for some representative applications such as sorting of silica particles of two different sizes, of closely packed colloids and of white blood cells and red blood cells from a mixture of the two.