Science.gov

Sample records for activity descriptions materials

  1. 77 FR 24269 - Proposed Information Collection (Description of Materials) Activity: Comment Request

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-04-23

    ... information needed to determine if proposed construction material meets regulatory requirements and if the...-1852 is used to document material used in the construction of a dwelling or specially adapted housing... AFFAIRS Proposed Information Collection (Description of Materials) Activity: Comment Request...

  2. Calculator-Active Materials.

    ERIC Educational Resources Information Center

    Crow, Tracy, Ed.; Harris, Julia, Ed.

    1997-01-01

    This journal contains brief descriptions of calculator-active materials that were found using Resource Finder, the searchable online catalog of curriculum resources from the Eisenhower National Clearinghouse (ENC). It features both the calculators themselves and the activity books that are used with them. Among the calculators included are those…

  3. Orbiter active thermal control system description

    NASA Technical Reports Server (NTRS)

    Laubach, G. E.

    1975-01-01

    A brief description of the Orbiter Active Thermal Control System (ATCS) including (1) major functional requirements of heat load, temperature control and heat sink utilization, (2) the overall system arrangement, and (3) detailed description of the elements of the ATCS.

  4. Materials Processing in Space (MPS) program description

    NASA Technical Reports Server (NTRS)

    1981-01-01

    Insight is provided into the scientific rotationale for materials processing in space (MPS), and a comprehensive and cohesive approach for implementation and integration of the many, diverse aspects of MPS is described. The programmatic and management functions apply to all projects and activities implemented under MPS. It is intended that specific project plans, providing project unique details, will be appended to this document for endeavors such as the Space Processing Applications Rocket (SPAR) Project, the Materials Experiment Assembly (MEA) Project, the MPS/Spacelab (MPS/SL) Project, and the Materials Experiment Carrier (MEC) Payloads.

  5. IHE material qualification tests description and criteria

    SciTech Connect

    Slape, R J

    1984-06-01

    This report describes the qualification tests presently being used at Pantex Plant, Lawrence Livermore National Laboratory, and Los Alamos National Laboratory that are required by the Department of Energy prior to the approval for an explosive as an Insensitive High Explosive (IHE) material. The acceptance criteria of each test for IHE qualification is also discussed. 5 references, 10 figures.

  6. 49 CFR 172.202 - Description of hazardous material on shipping papers.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ...; self-reactive substances; batteries other than those containing lithium, lithium ions, or sodium... description must be indicated (by mass or volume, or by activity for Class 7 materials) and must include an... mass. For an explosive that is an article, such as Cartridges, small arms, the net explosive mass...

  7. Cosmogenic activation of materials

    SciTech Connect

    Amare, J.; Beltran, B.; Carmona, J.M.; Cebrian, S.; Garcia, E.; Irastorza, I.G.; Gomez, H.; Luzon, G.; Martinez, M.; Morales, J.; Ortiz de Solorzano, A.; Pobes, C.; Puimedon, J.; Rodriguez, A.; Ruz, J.; Sarsa, M. L.; Torres, L.; Villar, J.A.; Capelli, S.; Capozzi, F.

    2005-09-08

    The problem of cosmogenic activation produced at sea level in materials typically used in underground experiments looking for rare events is being studied. Several nuclear data libraries have been screened looking for relevant isotope production cross-sections and different codes which can be applied to activation studies have been reviewed. The excitation functions for some problems of interest like production of 60Co and 68Ge in germanium and production of 60Co in tellurium have been obtained taking into account both measurements and calculations and a preliminary estimate of the corresponding rates of production at sea level has been performed.

  8. Activated carbon material

    DOEpatents

    Evans, A. Gary

    1978-01-01

    Activated carbon particles for use as iodine trapping material are impregnated with a mixture of selected iodine and potassium compounds to improve the iodine retention properties of the carbon. The I/K ratio is maintained at less than about 1 and the pH is maintained at above about 8.0. The iodine retention of activated carbon previously treated with or coimpregnated with triethylenediamine can also be improved by this technique. Suitable flame retardants can be added to raise the ignition temperature of the carbon to acceptable standards.

  9. A Phenomenological Description of Primary Creep in Class M Materials

    NASA Technical Reports Server (NTRS)

    Raj, S. V.; Freed, A. D.

    1999-01-01

    Observations of creep microstructures in the primary creep region in class M materials show a remarkable similarity with those formed in the exponential creep regime. As a result, it is proposed that the constitutive creep law for normal primary creep is similar to that for the exponential creep regime. A phenomenological description is discussed to rationalize these microstructural observations in terms of a normalized strain rate vs. stress plot. The implications of this plot in describing different testing procedures, steady-state flow, and on the observed deviations from the universal creep law are discussed. The plot is also extended to explain the observed similarities in the transient creep behavior in pre-strained materials and in stress change experiments.

  10. Geothermal materials development activities

    SciTech Connect

    Kukacka, L.E.

    1993-06-01

    This ongoing R&D program is a part of the Core Research Category of the Department of Energy/Geothermal Division initiative to accelerate the utilization of geothermal resources. High risk materials problems that if successfully solved will result in significant reductions in well drilling, fluid transport and energy conversion costs, are emphasized. The project has already developed several advanced materials systems that are being used by the geothermal industry and by Northeastern Electric, Gas and Steam Utilities. Specific topics currently being addressed include lightweight C0{sub 2}-resistant well cements, thermally conductive scale and corrosion resistant liner systems, chemical systems for lost circulation control, elastomer-metal bonding systems, and corrosion mitigation at the Geysers. Efforts to enhance the transfer of the technologies developed in these activities to other sectors of the economy are also underway.

  11. Mechanically Active Electrospun Materials

    NASA Astrophysics Data System (ADS)

    Robertson, Jaimee M.

    Electrospinning, a technique used to fabricate small diameter polymer fibers, has been employed to develop unique, active materials falling under two categories: (1) shape memory elastomeric composites (SMECs) and (2) water responsive fiber mats. (1) Previous work has characterized in detail the properties and behavior of traditional SMECs with isotropic fibers embedded in an elastomer matrix. The current work has two goals: (i) characterize laminated anisotropic SMECs and (ii) develop a fabrication process that is scalable for commercial SMEC manufacturing. The former ((i)) requires electrospinning aligned polymer fibers. The aligned fibers are similarly embedded in an elastomer matrix and stacked at various fiber orientations. The resulting laminated composite has a unique response to tensile deformation: after stretching and releasing, the composite curls. This curling response was characterized based on fiber orientation. The latter goal ((ii)) required use of a dual-electrospinning process to simultaneously electrospin two polymers. This fabrication approach incorporated only industrially relevant processing techniques, enabling the possibility of commercial application of a shape memory rubber. Furthermore, the approach had the added benefit of increased control over composition and material properties. (2) The strong elongational forces experienced by polymer chains during the electrospinning process induce molecular alignment along the length of electrospun fibers. Such orientation is maintained in the fibers as the polymer vitrifies. Consequently, residual stress is stored in electrospun fiber mats and can be recovered by heating through the polymer's glass transition temperature. Alternatively, the glass transition temperature can be depressed by introducing a plasticizing agent. Poly(vinyl acetate) (PVAc) is plasticized by water, and its glass transition temperature is lowered below room temperature. Therefore, the residual stress can be relaxed at room

  12. Structured Natural-Language Descriptions for Semantic Content Retrieval of Visual Materials.

    ERIC Educational Resources Information Center

    Tam, A. M.; Leung, C. H. C.

    2001-01-01

    Proposes a structure for natural language descriptions of the semantic content of visual materials that requires descriptions to be (modified) keywords, phrases, or simple sentences, with components that are grammatical relations common to many languages. This structure makes it easy to implement a collection's descriptions as a relational…

  13. 40 CFR 411.30 - Applicability; description of the materials storage piles runoff subcategory.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... runoff of rainfall which derives from the storage of materials including raw materials, intermediate... materials storage piles runoff subcategory. 411.30 Section 411.30 Protection of Environment ENVIRONMENTAL... Materials Storage Piles Runoff Subcategory § 411.30 Applicability; description of the materials...

  14. Towards an ab initio description of correlated materials

    NASA Astrophysics Data System (ADS)

    Yee, Chuck-Hou

    Strongly-correlated materials are a rich playground for physical phenomena, exhibiting complex phase diagrams with many competing orders. Ab initio insights into materials combined with physical ideas provide the ability to identify the organizing principles driving the correlated electronic behavior and pursue first-principles design of new compounds. Realistic modeling of correlated materials is an active area of research, especially with the recent merger of density functional theory (DFT) with dynamical mean-field theory (DMFT). This thesis is structured in two parts. The first describes the methods and algorithmic developments which drive advances in DFT+DMFT. In Ch. 2 and 3, we provide an overview of the two foundational theories, DMFT and DFT. In the second half of Ch. 3, we describe some of the principles guiding the combination of the two theories to form DFT+DMFT. In Ch. 4, we describe the algorithm lying at the heart of modern DFT+DMFT implementations, the hybridization expansion formulation of continuous-time quantum monte carlo (CTQMC) for the general Anderson impurity problem, as well as a fast rejection algorithm for speeding-up the local trace evaluation. The final chapter in the methods section describes an algorithm for direct sampling of the partition function, and thus the free energy and entropy, of simple Anderson impurity models within CTQMC. The second part of the thesis is a collection of applications of our ab initio approach to key correlated materials. We first apply our method to plutonium binary alloys (Ch. 6), which when supplemented with slave-boson mean-field theory, allows us to understand the observed photoemission spectra. Ch. 7 describes the computation of spectra and optical conductivity for rare-earth nickelates grown as epitaxial thin films. In the final two chapters, we turn our attention to the high-temperature superconductors. In the first, we show that the charge-transfer energy is a key chemical variable which controls

  15. 1 CFR 20.4 - Description of program activities.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 1 General Provisions 1 2011-01-01 2011-01-01 false Description of program activities. 20.4 Section 20.4 General Provisions ADMINISTRATIVE COMMITTEE OF THE FEDERAL REGISTER PREPARATION, TRANSMITTAL, AND PROCESSING OF DOCUMENTS HANDLING OF THE UNITED STATES GOVERNMENT MANUAL STATEMENTS §...

  16. 1 CFR 20.4 - Description of program activities.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 1 General Provisions 1 2010-01-01 2010-01-01 false Description of program activities. 20.4 Section 20.4 General Provisions ADMINISTRATIVE COMMITTEE OF THE FEDERAL REGISTER PREPARATION, TRANSMITTAL, AND PROCESSING OF DOCUMENTS HANDLING OF THE UNITED STATES GOVERNMENT MANUAL STATEMENTS §...

  17. 1 CFR 20.4 - Description of program activities.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 1 General Provisions 1 2014-01-01 2012-01-01 true Description of program activities. 20.4 Section 20.4 General Provisions ADMINISTRATIVE COMMITTEE OF THE FEDERAL REGISTER PREPARATION, TRANSMITTAL, AND PROCESSING OF DOCUMENTS HANDLING OF THE UNITED STATES GOVERNMENT MANUAL STATEMENTS §...

  18. 1 CFR 20.4 - Description of program activities.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 1 General Provisions 1 2013-01-01 2012-01-01 true Description of program activities. 20.4 Section 20.4 General Provisions ADMINISTRATIVE COMMITTEE OF THE FEDERAL REGISTER PREPARATION, TRANSMITTAL, AND PROCESSING OF DOCUMENTS HANDLING OF THE UNITED STATES GOVERNMENT MANUAL STATEMENTS §...

  19. 1 CFR 20.4 - Description of program activities.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 1 General Provisions 1 2012-01-01 2012-01-01 false Description of program activities. 20.4 Section 20.4 General Provisions ADMINISTRATIVE COMMITTEE OF THE FEDERAL REGISTER PREPARATION, TRANSMITTAL, AND PROCESSING OF DOCUMENTS HANDLING OF THE UNITED STATES GOVERNMENT MANUAL STATEMENTS §...

  20. 40 CFR 466.30 - Applicability; description of the aluminum basis material subcategory.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... aluminum basis material subcategory. 466.30 Section 466.30 Protection of Environment ENVIRONMENTAL... Aluminum Basis Material Subcategory § 466.30 Applicability; description of the aluminum basis material... into publicly owned treatment works from porcelain enameling of aluminum basis materials....

  1. 40 CFR 466.30 - Applicability; description of the aluminum basis material subcategory.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... aluminum basis material subcategory. 466.30 Section 466.30 Protection of Environment ENVIRONMENTAL... Aluminum Basis Material Subcategory § 466.30 Applicability; description of the aluminum basis material... into publicly owned treatment works from porcelain enameling of aluminum basis materials....

  2. 40 CFR 466.40 - Applicability; description of the copper basis material subcategory.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... copper basis material subcategory. 466.40 Section 466.40 Protection of Environment ENVIRONMENTAL... Copper Basis Material Subcategory § 466.40 Applicability; description of the copper basis material... into publicly owned treatment works from porcelain enameling of copper basis materials....

  3. 40 CFR 465.10 - Applicability; description of the steel basis material subcategory.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... steel basis material subcategory. 465.10 Section 465.10 Protection of Environment ENVIRONMENTAL... CATEGORY Steel Basis Material Subcategory § 465.10 Applicability; description of the steel basis material... pollutants into publicly owned treatment works from coil coating of steel basis material coils....

  4. 40 CFR 465.10 - Applicability; description of the steel basis material subcategory.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... steel basis material subcategory. 465.10 Section 465.10 Protection of Environment ENVIRONMENTAL... CATEGORY Steel Basis Material Subcategory § 465.10 Applicability; description of the steel basis material... pollutants into publicly owned treatment works from coil coating of steel basis material coils....

  5. 40 CFR 465.10 - Applicability; description of the steel basis material subcategory.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... steel basis material subcategory. 465.10 Section 465.10 Protection of Environment ENVIRONMENTAL... CATEGORY Steel Basis Material Subcategory § 465.10 Applicability; description of the steel basis material... pollutants into publicly owned treatment works from coil coating of steel basis material coils....

  6. 40 CFR 158.325 - Description of materials used to produce the product.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 40 Protection of Environment 24 2014-07-01 2014-07-01 false Description of materials used to produce the product. 158.325 Section 158.325 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Product Chemistry § 158.325 Description...

  7. 40 CFR 158.325 - Description of materials used to produce the product.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 25 2012-07-01 2012-07-01 false Description of materials used to produce the product. 158.325 Section 158.325 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Product Chemistry § 158.325 Description...

  8. 40 CFR 158.325 - Description of materials used to produce the product.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 25 2013-07-01 2013-07-01 false Description of materials used to produce the product. 158.325 Section 158.325 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Product Chemistry § 158.325 Description...

  9. 40 CFR 158.325 - Description of materials used to produce the product.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Description of materials used to produce the product. 158.325 Section 158.325 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Product Chemistry § 158.325 Description...

  10. 40 CFR 158.325 - Description of materials used to produce the product.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 24 2011-07-01 2011-07-01 false Description of materials used to produce the product. 158.325 Section 158.325 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Product Chemistry § 158.325 Description...

  11. 40 CFR 465.30 - Applicability; description of the aluminum basis material subcategory.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... aluminum basis material subcategory. 465.30 Section 465.30 Protection of Environment ENVIRONMENTAL... CATEGORY Aluminum Basis Material Subcategory § 465.30 Applicability; description of the aluminum basis... of pollutants into publicly owned treatment works from coil coating of aluminum basis material coils....

  12. 40 CFR 465.30 - Applicability; description of the aluminum basis material subcategory.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... aluminum basis material subcategory. 465.30 Section 465.30 Protection of Environment ENVIRONMENTAL... CATEGORY Aluminum Basis Material Subcategory § 465.30 Applicability; description of the aluminum basis... of pollutants into publicly owned treatment works from coil coating of aluminum basis material coils....

  13. 40 CFR 465.30 - Applicability; description of the aluminum basis material subcategory.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... aluminum basis material subcategory. 465.30 Section 465.30 Protection of Environment ENVIRONMENTAL... CATEGORY Aluminum Basis Material Subcategory § 465.30 Applicability; description of the aluminum basis... of pollutants into publicly owned treatment works from coil coating of aluminum basis material coils....

  14. 40 CFR 465.10 - Applicability; description of the steel basis material subcategory.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... steel basis material subcategory. 465.10 Section 465.10 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS COIL COATING POINT SOURCE CATEGORY Steel Basis Material Subcategory § 465.10 Applicability; description of the steel basis material...

  15. 40 CFR 466.10 - Applicability; description of the steel basis material.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... steel basis material. 466.10 Section 466.10 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) PORCELAIN ENAMELING POINT SOURCE CATEGORY Steel Basis Material Subcategory § 466.10 Applicability; description of the steel basis material. This...

  16. 40 CFR 465.10 - Applicability; description of the steel basis material subcategory.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... steel basis material subcategory. 465.10 Section 465.10 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS COIL COATING POINT SOURCE CATEGORY Steel Basis Material Subcategory § 465.10 Applicability; description of the steel basis material...

  17. 40 CFR 466.10 - Applicability; description of the steel basis material.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... steel basis material. 466.10 Section 466.10 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) PORCELAIN ENAMELING POINT SOURCE CATEGORY Steel Basis Material Subcategory § 466.10 Applicability; description of the steel basis material. This...

  18. 40 CFR 466.10 - Applicability; description of the steel basis material.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... steel basis material. 466.10 Section 466.10 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) PORCELAIN ENAMELING POINT SOURCE CATEGORY Steel Basis Material Subcategory § 466.10 Applicability; description of the steel basis material. This...

  19. 40 CFR 466.10 - Applicability; description of the steel basis material.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... steel basis material. 466.10 Section 466.10 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS PORCELAIN ENAMELING POINT SOURCE CATEGORY Steel Basis Material Subcategory § 466.10 Applicability; description of the steel basis material. This subpart applies...

  20. 40 CFR 466.10 - Applicability; description of the steel basis material.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... steel basis material. 466.10 Section 466.10 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS PORCELAIN ENAMELING POINT SOURCE CATEGORY Steel Basis Material Subcategory § 466.10 Applicability; description of the steel basis material. This subpart applies...

  1. BOOK SELECTION MEDIA, A DESCRIPTIVE GUIDE TO 170 AIDS FOR SELECTING LIBRARY MATERIALS.

    ERIC Educational Resources Information Center

    PERKINS, RALPH

    THIS BOOK CONTAINS DESCRIPTIVE SUMMARIES OF 170 BIBLIOGRAPHIES WHICH AID IN THE SELECTION OF LIBRARY MATERIALS. THE LISTING, ALPHABETICALLY BY TITLE, INCLUDES BOTH GENERAL GUIDES FOR THOSE PERSONS SELECTING MATERIALS FOR ALL AGE GROUPS AND GUIDES WHICH NOTE MATERIALS APPROPRIATE FOR SPECIFIC AGE AND INTEREST GROUPS. SIX INDEXES, IN ADDITION TO THE…

  2. CARRIER PREPARATION BUILDING MATERIALS HANDLING SYSTEM DESCRIPTION DOCUMENT

    SciTech Connect

    E.F. Loros

    2000-06-28

    The Carrier Preparation Building Materials Handling System receives rail and truck shipping casks from the Carrier/Cask Transport System, and inspects and prepares the shipping casks for return to the Carrier/Cask Transport System. Carrier preparation operations for carriers/casks received at the surface repository include performing a radiation survey of the carrier and cask, removing/retracting the personnel barrier, measuring the cask temperature, removing/retracting the impact limiters, removing the cask tie-downs (if any), and installing the cask trunnions (if any). The shipping operations for carriers/casks leaving the surface repository include removing the cask trunnions (if any), installing the cask tie-downs (if any), installing the impact limiters, performing a radiation survey of the cask, and installing the personnel barrier. There are four parallel carrier/cask preparation lines installed in the Carrier Preparation Building with two preparation bays in each line, each of which can accommodate carrier/cask shipping and receiving. The lines are operated concurrently to handle the waste shipping throughputs and to allow system maintenance operations. One remotely operated overhead bridge crane and one remotely operated manipulator is provided for each pair of carrier/cask preparation lines servicing four preparation bays. Remotely operated support equipment includes a manipulator and tooling and fixtures for removing and installing personnel barriers, impact limiters, cask trunnions, and cask tie-downs. Remote handling equipment is designed to facilitate maintenance, dose reduction, and replacement of interchangeable components where appropriate. Semi-automatic, manual, and backup control methods support normal, abnormal, and recovery operations. Laydown areas and equipment are included as required for transportation system components (e.g., personnel barriers and impact limiters), fixtures, and tooling to support abnormal and recovery operations. The

  3. Material description of fluxes in terms of differential forms

    NASA Astrophysics Data System (ADS)

    Federico, Salvatore; Grillo, Alfio; Segev, Reuven

    2016-03-01

    The flux of a certain extensive physical quantity across a surface is often represented by the integral over the surface of the component of a pseudo-vector normal to the surface. A pseudo-vector is in fact a possible representation of a second-order differential form, i.e. a skew-symmetric second-order covariant tensor, which follows the regular transformation laws of tensors. However, because of the skew-symmetry of differential forms, the associated pseudo-vector follows a transformation law that is different from that of proper vectors, and is named after the Italian mathematical physicist Gabrio Piola (1794-1850). In this work, we employ the methods of Differential Geometry and the representation in terms of differential forms to demonstrate how the flux of an extensive quantity transforms from the spatial to the material point of view. After an introduction to the theory of differential forms, their transformation laws, and their role in integration theory, we apply them to the case of first-order transport laws such as Darcy's law and Ohm's law.

  4. 40 CFR 465.30 - Applicability; description of the aluminum basis material subcategory.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... aluminum basis material subcategory. 465.30 Section 465.30 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS COIL COATING POINT SOURCE CATEGORY Aluminum Basis Material Subcategory § 465.30 Applicability; description of the aluminum basis...

  5. 40 CFR 466.30 - Applicability; description of the aluminum basis material subcategory.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... aluminum basis material subcategory. 466.30 Section 466.30 Protection of Environment ENVIRONMENTAL... CATEGORY Aluminum Basis Material Subcategory § 466.30 Applicability; description of the aluminum basis... of pollutants into publicly owned treatment works from porcelain enameling of aluminum...

  6. 40 CFR 465.30 - Applicability; description of the aluminum basis material subcategory.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... aluminum basis material subcategory. 465.30 Section 465.30 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS COIL COATING POINT SOURCE CATEGORY Aluminum Basis Material Subcategory § 465.30 Applicability; description of the aluminum basis...

  7. 40 CFR 466.30 - Applicability; description of the aluminum basis material subcategory.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... aluminum basis material subcategory. 466.30 Section 466.30 Protection of Environment ENVIRONMENTAL... CATEGORY Aluminum Basis Material Subcategory § 466.30 Applicability; description of the aluminum basis... of pollutants into publicly owned treatment works from porcelain enameling of aluminum...

  8. 40 CFR 466.30 - Applicability; description of the aluminum basis material subcategory.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... aluminum basis material subcategory. 466.30 Section 466.30 Protection of Environment ENVIRONMENTAL... CATEGORY Aluminum Basis Material Subcategory § 466.30 Applicability; description of the aluminum basis... of pollutants into publicly owned treatment works from porcelain enameling of aluminum...

  9. 40 CFR 466.20 - Applicability; description of the cast iron basis material subcategory.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... iron basis material subcategory. 466.20 Section 466.20 Protection of Environment ENVIRONMENTAL... Cast Iron Basis Material Subcategory § 466.20 Applicability; description of the cast iron basis... of pollutants into publicly owned treatment works from porcelain enameling of cast iron...

  10. 40 CFR 466.20 - Applicability; description of the cast iron basis material subcategory.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... iron basis material subcategory. 466.20 Section 466.20 Protection of Environment ENVIRONMENTAL... Cast Iron Basis Material Subcategory § 466.20 Applicability; description of the cast iron basis... of pollutants into publicly owned treatment works from porcelain enameling of cast iron...

  11. 40 CFR 161.160 - Description of materials used to produce the product.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 25 2012-07-01 2012-07-01 false Description of materials used to produce the product. 161.160 Section 161.160 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR REGISTRATION OF ANTIMICROBIAL PESTICIDES...

  12. 40 CFR 161.160 - Description of materials used to produce the product.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 24 2011-07-01 2011-07-01 false Description of materials used to produce the product. 161.160 Section 161.160 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR REGISTRATION OF ANTIMICROBIAL PESTICIDES...

  13. 40 CFR 161.160 - Description of materials used to produce the product.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 40 Protection of Environment 25 2013-07-01 2013-07-01 false Description of materials used to produce the product. 161.160 Section 161.160 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR REGISTRATION OF ANTIMICROBIAL PESTICIDES...

  14. 40 CFR 161.160 - Description of materials used to produce the product.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Description of materials used to produce the product. 161.160 Section 161.160 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR REGISTRATION OF ANTIMICROBIAL PESTICIDES...

  15. A Description and Evaluation of the Archival Materials of the Pontifical College Josephinum.

    ERIC Educational Resources Information Center

    Fry, Michael J.

    A description and evaluation of the archival materials of the Pontifical College Josephinum (Columbus, Ohio) is presented, with a focus on the founder of the Josephinum, Monsignor Joseph Jessing, and his place within the archives. The paper is intended to provide the administration of the Josephinum with recommendations and to stimulate further…

  16. Active plasma resonance spectroscopy: a functional analytic description

    NASA Astrophysics Data System (ADS)

    Lapke, M.; Oberrath, J.; Mussenbrock, T.; Brinkmann, R. P.

    2013-04-01

    The term ‘active plasma resonance spectroscopy’ denotes a class of diagnostic methods which employ the ability of plasmas to resonate on or near the plasma frequency. The basic idea dates back to the early days of discharge physics: a signal in the GHz range is coupled to the plasma via an electrical probe; the spectral response is recorded, and then evaluated with a mathematical model to obtain information on the electron density and other plasma parameters. In recent years, the concept has found renewed interest as a basis of industry compatible plasma diagnostics. This paper analyzes the diagnostic technique in terms of a general description based on functional analytic (or Hilbert Space) methods which hold for arbitrary probe geometries. It is shown that the response function of the plasma-probe system can be expressed as a matrix element of the resolvent of an appropriately defined dynamical operator. A specialization of the formalism to a symmetric probe design is given, as well as an interpretation in terms of a lumped circuit model consisting of series resonance circuits. We present ideas for an optimized probe design based on geometric and electrical symmetry.

  17. Do choosing wisely tools meet criteria for patient decision aids? A descriptive analysis of patient materials

    PubMed Central

    Légaré, France; Hébert, Jessica; Goh, Larissa; Lewis, Krystina B; Leiva Portocarrero, Maria Ester; Robitaille, Hubert; Stacey, Dawn

    2016-01-01

    Objectives Choosing Wisely is a remarkable physician-led campaign to reduce unnecessary or harmful health services. Some of the literature identifies Choosing Wisely as a shared decision-making approach. We evaluated the patient materials developed by Choosing Wisely Canada to determine whether they meet the criteria for shared decision-making tools known as patient decision aids. Design Descriptive analysis of all Choosing Wisely Canada patient materials. Data source In May 2015, we selected all Choosing Wisely Canada patient materials from its official website. Main outcomes and measures Four team members independently extracted characteristics of the English materials using the International Patient Decision Aid Standards (IPDAS) modified 16-item minimum criteria for qualifying and certifying patient decision aids. The research team discussed discrepancies between data extractors and reached a consensus. Descriptive analysis was conducted. Results Of the 24 patient materials assessed, 12 were about treatments, 11 were about screening and 1 was about prevention. The median score for patient materials using IPDAS criteria was 10/16 (range: 8–11) for screening topics and 6/12 (range: 6–9) for prevention and treatment topics. Commonly missed criteria were stating the decision (21/24 did not), providing balanced information on option benefits/harms (24/24 did not), citing evidence (24/24 did not) and updating policy (24/24 did not). Out of 24 patient materials, only 2 met the 6 IPDAS criteria to qualify as patient decision aids, and neither of these 2 met the 6 certifying criteria. Conclusions Patient materials developed by Choosing Wisely Canada do not meet the IPDAS minimal qualifying or certifying criteria for patient decision aids. Modifications to the Choosing Wisely Canada patient materials would help to ensure that they qualify as patient decision aids and thus as more effective shared decision-making tools. PMID:27566638

  18. Electroviscoelastic materials as active dampers

    NASA Astrophysics Data System (ADS)

    Biggerstaff, Janet M.; Kosmatka, John B.

    2002-07-01

    Electroviscoelastic materials (EVEMs) are polymeric materials that exhibit changes in structural properties when a voltage is applied across it. In the current study, an EVEM is developed that produce large changes in stiffness and damping materials with applied voltage. The resulting material exhibits many of the same properties as an electrorheological (ER) material, except the current material is self-supporting and thus can be used to applications where viscoelastic materials are used. The EVEM is composed of three components: 20% (by mass) of poly (p-phenylene) (PPP) particles doped with CuCl2 or FeCl3, 64% of Dow Sylgard 527 silicone gel, and 16% Dow Corning Sylgard 182 silicone elastomer, where the elastomer is added to for stiffening. Experimental harmonic tests using a double-lap shear test and a 0.025 thick specimens between 1 and 150 Hz reveal a factor six increase in stiffening and a factor of three decrease in damping with applied voltage (1500v).

  19. Increasing Activity Attendance and Engagement in Individuals with Dementia Using Descriptive Prompts

    ERIC Educational Resources Information Center

    Brenske, Shasta; Rudrud, Eric H.; Schulze, Kimberly A.; Rapp, John T.

    2008-01-01

    The effects of providing descriptive prompts to increase activity attendance and engagement in 6 individuals with dementia were evaluated using a reversal design. The results showed that providing descriptive prompts increased activity attendance and engagement for all participants. The results support the use of antecedent interventions for…

  20. Organic active materials for batteries

    DOEpatents

    Abouimrane, Ali; Weng, Wei; Amine, Khalil

    2016-08-16

    A rechargeable battery includes a compound having at least two active sites, R.sup.1 and R.sup.2; wherein the at least two active sites are interconnected by one or more conjugated moieties; each active site is coordinated to one or more metal ions M.sup.a+ or each active site is configured to coordinate to one or more metal ions; and "a" is 1, 2, or 3.

  1. Direct waste heat recovery via thermoelectric materials - chosen issues of the thermodynamic description

    NASA Astrophysics Data System (ADS)

    Kolasiński, Piotr; Kolasińska, Ewa

    2016-02-01

    The effective waste heat recovery is one of the present-day challenges in the industry and power engineering. The energy systems dedicated for waste heat conversion into electricity are usually characterized by low efficiency and are complicated in the design. The possibility of waste heat recovery via thermoelectric materials may be an interesting alternative to the currently used technologies. In particular, due to their material characteristics, conducting polymers may be competitive when compared with the power machinery and equipment. These materials can be used in a wide range of the geometries e.g. the bulk products, thin films, pristine form or composites and the others. In this article, the authors present selected issues related to the mathematical and thermodynamic description of the heat transfer processes in the thermoelectric materials dedicated for the waste heat recovery. The link of these models with electrical properties of the material and a material solution based on a conducting polymer have also been presented in this paper.

  2. Activation of porous MOF materials

    SciTech Connect

    Hupp, Joseph T; Farha, Omar K

    2013-04-23

    A method for the treatment of solvent-containing MOF material to increase its internal surface area involves introducing a liquid into the MOF in which liquid the solvent is miscible, subjecting the MOF to supercritical conditions for a time to form supercritical fluid, and releasing the supercritical conditions to remove the supercritical fluid from the MOF. Prior to introducing the liquid into the MOF, occluded reaction solvent, such as DEF or DMF, in the MOF can be exchanged for the miscible solvent.

  3. Activation of porous MOF materials

    SciTech Connect

    Hupp, Joseph T; Farha, Omar K

    2014-04-01

    A method for the treatment of solvent-containing MOF material to increase its internal surface area involves introducing a liquid into the MOF in which liquid the solvent is miscible, subjecting the MOF to supercritical conditions for a time to form supercritical fluid, and releasing the supercritical conditions to remove the supercritcal fluid from the MOF. Prior to introducing the liquid into the MOF, occluded reaction solvent, such as DEF or DMF, in the MOF can be exchanged for the miscible solvent.

  4. Hydrodynamic description of elastic or viscoelastic composite materials: Relative strains as macroscopic variables.

    PubMed

    Menzel, Andreas M

    2016-08-01

    One possibility to adjust material properties to a specific need is to embed units of one substance into a matrix of another substance. Even materials that are readily tunable during operation can be generated in this way. In (visco)elastic substances, both the matrix material as well as the inclusions and/or their immediate environment can be dynamically deformed. If the typical dynamic response time of the inclusions and their surroundings approach the macroscopic response time, their deformation processes need to be included into a dynamic macroscopic characterization. Along these lines, we present a hydrodynamic description of (visco)elastic composite materials. For this purpose, additional strain variables reflect the state of the inclusions and their immediate environment. These additional strain variables in general are not set by a coarse-grained macroscopic displacement field. Apart from that, during our derivation, we also include the macroscopic variables of relative translations and relative rotations that were previously introduced in different contexts. As a central point, our approach reveals and classifies the importance of a macroscopic variable termed relative strains. We analyze two simplified minimal example geometries as an illustration. PMID:27627384

  5. Hydrodynamic description of elastic or viscoelastic composite materials: Relative strains as macroscopic variables

    NASA Astrophysics Data System (ADS)

    Menzel, Andreas M.

    2016-08-01

    One possibility to adjust material properties to a specific need is to embed units of one substance into a matrix of another substance. Even materials that are readily tunable during operation can be generated in this way. In (visco)elastic substances, both the matrix material as well as the inclusions and/or their immediate environment can be dynamically deformed. If the typical dynamic response time of the inclusions and their surroundings approach the macroscopic response time, their deformation processes need to be included into a dynamic macroscopic characterization. Along these lines, we present a hydrodynamic description of (visco)elastic composite materials. For this purpose, additional strain variables reflect the state of the inclusions and their immediate environment. These additional strain variables in general are not set by a coarse-grained macroscopic displacement field. Apart from that, during our derivation, we also include the macroscopic variables of relative translations and relative rotations that were previously introduced in different contexts. As a central point, our approach reveals and classifies the importance of a macroscopic variable termed relative strains. We analyze two simplified minimal example geometries as an illustration.

  6. Applicability of the modified XPP model to a description of flow behaviour of polymeric materials

    NASA Astrophysics Data System (ADS)

    Pivokonsky, Radek; Filip, Petr; Zelenkova, Jana

    2015-04-01

    A 3N-parameter (3 parameters per mode) phenomenological modification of the XPP model for a description of the rheological properties of polymer melts is proposed. The predictive/fitting capabilities of the modified XPP model are compared with the Giesekus, XPP, and modified Leonov models using various polymeric materials in steady shear and uniaxial elongational flows. Its predictability of the rheological properties of the studied materials seems to be very good, including strain hardening in uniaxial elongational flow. Consequently, the GS derivative term was implemented into this modified XPP model. Then the model contains two linear parameters per mode (relaxation time and shear modulus) and two non-linear ones (the fitting parameter simultaneously controlling both strain hardening in elongation flow and shear thinning, and the slip parameter influencing almost solely shear thinning). The efficiency of this model is tested using LDPE and HDPE materials and compared with the modified Leonov model and network-based exponential PTT and PTT-XPP models, both of them containing the GS derivative term.

  7. Specialized Language Activities: A Description of the First Year.

    ERIC Educational Resources Information Center

    Oxford Hills High School, South Paris, ME.

    The Specialized Language Activities Program (ESEA Title 3 Project) to motivate students to improve their oral language was conducted in an essentially rural section of Maine with an experimental group and a control group of 80 ninth-grade students with an I.Q. range of 85-100 and poor language usage. Sixty-seven percent of them had repeated at…

  8. A model of job activity description for workplace accommodation assessment.

    PubMed

    Sevilla, Joaquin; Sanford, Jon A

    2013-01-01

    Workplace accommodations to enable employees with disabilities to perform essential job tasks are an important strategy ways for increasing the presence of people with disabilities in the labor market. However, assessments, which are crucial to identifying necessary accommodations, are typically conducted using a variety of methods that lack consistent procedures and comprehensiveness of information. This can lead to the rediscovery of the same solutions over and over, inability to replicate assessments and a failure to effectively meet all of an individual's accommodation needs. To address standardize assessment tools and processes, a taxonomy of demand-producing activity factors is needed to complement the taxonomies of demand-producing person and environment factors already available in the International Classification of Functioning, Disability and Health (ICF). The purpose of this article is to propose a hierarchical model of accommodation assessment based on level of specificity of job activity. While the proposed model is neither a taxonomy nor an assessment process, the seven-level hierarchical model provides a conceptual framework of job activity that is the first step toward such a taxonomy as well as providing a common language that can bridge the many approaches to assessment. The model was designed and refined through testing against various job examples. Different levels of activity are defined to be easily linked to different accommodation strategies. Finally, the levels can be cross-walked to the ICF, which enhances its acceptability, utility and universality.

  9. Classical Nucleation Theory Description of Active Colloid Assembly

    NASA Astrophysics Data System (ADS)

    Redner, Gabriel S.; Wagner, Caleb G.; Baskaran, Aparna; Hagan, Michael F.

    2016-09-01

    Nonaligning self-propelled particles with purely repulsive excluded volume interactions undergo athermal motility-induced phase separation into a dilute gas and a dense cluster phase. Here, we use enhanced sampling computational methods and analytic theory to examine the kinetics of formation of the dense phase. Despite the intrinsically nonequilibrium nature of the phase transition, we show that the kinetics can be described using an approach analogous to equilibrium classical nucleation theory, governed by an effective free energy of cluster formation with identifiable bulk and surface terms. The theory captures the location of the binodal, nucleation rates as a function of supersaturation, and the cluster size distributions below the binodal, while discrepancies in the metastable region reveal additional physics about the early stages of active crystal formation. The success of the theory shows that a framework similar to equilibrium thermodynamics can be obtained directly from the microdynamics of an active system, and can be used to describe the kinetics of evolution toward nonequilibrium steady states.

  10. Multiscale schemes for the predictive description and virtual engineering of materials.

    SciTech Connect

    von Lilienfeld-Toal, Otto Anatole

    2010-09-01

    This report documents research carried out by the author throughout his 3-years Truman fellowship. The overarching goal consisted of developing multiscale schemes which permit not only the predictive description but also the computational design of improved materials. Identifying new materials through changes in atomic composition and configuration requires the use of versatile first principles methods, such as density functional theory (DFT). Using DFT, its predictive reliability has been investigated with respect to pseudopotential construction, band-gap, van-der-Waals forces, and nuclear quantum effects. Continuous variation of chemical composition and derivation of accurate energy gradients in compound space has been developed within a DFT framework for free energies of solvation, reaction energetics, and frontier orbital eigenvalues. Similar variations have been leveraged within classical molecular dynamics in order to address thermal properties of molten salt candidates for heat transfer fluids used in solar thermal power facilities. Finally, a combination of DFT and statistical methods has been used to devise quantitative structure property relationships for the rapid prediction of charge mobilities in polyaromatic hydrocarbons.

  11. Manifestation of optical activity in different materials

    NASA Astrophysics Data System (ADS)

    Konstantinova, A. F.; Golovina, T. G.; Konstantinov, K. K.

    2014-07-01

    Various manifestations of optical activity (OA) in crystals and organic materials are considered. Examples of optically active enantiomorphic and nonenantiomorphic crystals of 18 symmetry classes are presented. The OA of enantiomorphic organic materials as components of living nature (amino acids, sugars, and proteins) is analyzed. Questions related to the origin of life on earth are considered. Examples of differences in the enantiomers of drugs are shown. The consequences of replacing conventional left-handed amino acids with additionally right-handed amino acids for living organisms are indicated.

  12. Map and description of the active part of the Slumgullion Landslide, Hinsdale County, Colorado

    USGS Publications Warehouse

    Fleming, R.W.; Baum, Rex L.; Giardino, Marco

    1999-01-01

    This text accompanies a map of many of the features on the active part of the Slumgullion landslide, Hinsdale County, Colo. Long-term movement creates and destroys a variety of structural features on the surface of the landslide including faults, fractures, and folds, as well as basins and ridges. The Slumgullion landslide consists of a large volume of inactive landslide deposits and a much smaller volume that is actively moving within the deposits of the older landslide. Previously, collapse of the south side of the scarp on Mesa Seco produced materials that blocked the Lake Fork of the Gunnison River and created Lake San Cristobal. The current landslide activity was triggered by a collapse, which apparently extended the preexisting headscarp toward the north. The loading induced by the deposition of the collapsed materials reactivated some of the older landslide deposits. Displacement rates in the active part of the landslide range from about 0.2 m/yr at the uppermost fractures to a maximum of 7.4 m/yr in the narrowest part of the landslide. From this maximum rate, displacement rate declines to 2 or less m/yr at the toe. The interplay between different displacement rates, varying width, and curving boundaries gives rise to the structures within the landslide. For purposes of description, the landslide has been divided into seven zones: head, zone of stretching, the hopper and neck, zone of pull-apart basins, pond deposits and emergent toe, zone of shortening and spreading, and active toe. Each zone has its characteristic kinematic expression that provides information on the internal deformation of the landslide. In general, the upper part of the landslide is characterized by features such as normal faults and tension cracks associated with stretching. The lowermost part of the landslide is characterized by thrust faults and other features associated with shortening. In between, features are a result of widening, bending, or narrowing of the landslide. Also, in

  13. Geopolymers and Related Alkali-Activated Materials

    NASA Astrophysics Data System (ADS)

    Provis, John L.; Bernal, Susan A.

    2014-07-01

    The development of new, sustainable, low-CO2 construction materials is essential if the global construction industry is to reduce the environmental footprint of its activities, which is incurred particularly through the production of Portland cement. One type of non-Portland cement that is attracting particular attention is based on alkali-aluminosilicate chemistry, including the class of binders that have become known as geopolymers. These materials offer technical properties comparable to those of Portland cement, but with a much lower CO2 footprint and with the potential for performance advantages over traditional cements in certain niche applications. This review discusses the synthesis of alkali-activated binders from blast furnace slag, calcined clay (metakaolin), and fly ash, including analysis of the chemical reaction mechanisms and binder phase assemblages that control the early-age and hardened properties of these materials, in particular initial setting and long-term durability. Perspectives for future research developments are also explored.

  14. Activity measurements of radon from construction materials.

    PubMed

    Fior, L; Nicolosi Corrêa, J; Paschuk, S A; Denyak, V V; Schelin, H R; Soreanu Pecequilo, B R; Kappke, J

    2012-07-01

    This work presents the results of radon concentration measurements of construction materials used in the Brazilian industry, such as clay (red) bricks and concrete blocks. The measurements focused on the detection of indoor radon activity during different construction stages and the analysis of radionuclides present in the construction materials. For this purpose, sealed chambers with internal dimensions of approximately 60×60×60 cm3 were built within a protected and isolated laboratory environment, and stable air humidity and temperature levels were maintained. These chambers were also used for radon emanation reduction tests. The chambers were built in four major stages: (1) assembly of the walls using clay (red) bricks, concrete blocks, and mortar; (2) installation of plaster; (3) finishing of wall surface using lime; and (4) insulation of wall surface and finishing using paint. Radon measurements were performed using polycarbonate etched track detectors. By comparing the three layers applied to the masonry walls, it was concluded that only the last step (wall painting using acrylic varnish) reduced the radon emanation, by a factor of approximately 2. Samples of the construction materials (clay bricks and concrete blocks) were ground, homogenized, and subjected to gamma-ray spectrometry analysis to evaluate the activity concentrations of 226Ra, 232Th and 40K. The values for the index of the activity concentration (I), radium equivalent activity (Raeq), and external hazard index (Hext) showed that these construction materials could be used without restrictions or concern about the equivalent dose limit (1 mSv/year).

  15. A materials failure relation of accelerating creep as empirical description of damage accumulation

    NASA Astrophysics Data System (ADS)

    Cornelius, R. R.; Scott, P. A.

    1993-07-01

    A general materials failure relation,ddot Ω = Adot Ω ^α, describes accelerating creep of materials with rate coefficients α and A, by relating rates of deformation,dot Ω, to changes in deformation rate,ddot Ω (Voight, 1988). Time of failure can be extrapolated from inverse rate versus time data, and α and A may be derived to permit one to calculate the failure time. The method is of value for quantitative hazard assessments. Mechanisms leading to damage accumulation during accelerating creep include creep fracture by stress corrosion and power law lattice deformation. These mechanisms are examined here as phenomenologically related to the materials failure relation. Apparently, both mechanisms favour α≅, where α is the parameter of the materials failure relation controlling the sensitivity to accelerating activity. For pure shear governed by power law creep of power p, under constant load, α=2.0 and A=p. Stress corrosion is widely described by Charles' equation, relating crack velocity to stress intensity during subcritical crack growth by the stress corrosion index n. The relationship between n and α is given by α=(2 n-2)/ n. The quantitative, predictive qualities of the general materials failure relationship are illustrated with examples from Mount Toc, Italy, and Mount St. Helens, Washington. Six chevron-notched short bar experiments under constant load serve as examples for accelerating creep fracture in the laboratory. The experiments were conducted on silstones of the Ithaca formation, which show a mean stress corrosion index of n=78±24. Analysis with regard to the materials failure relation results in a mean α=2.0±0.3, which complies with the established relationship between n and α.

  16. Recommended data elements for the descriptive cataloging of computer-based educational materials in the health sciences.

    PubMed

    Lyon-Hartmann, B; Goldstein, C M

    1978-01-01

    A large part of the mission of the National Library of Medicine is to collect, index, and disseminate the world's biomedical literature. Until recently, this related only to serial and monographic material, but as new forms of information appear responsibility for bibliographic control of these also must be assumed by the National Library of Medicine. This paper briefly describes the type of information that will be necessary before descriptive cataloging of computer-based educational materials can be attempted. PMID:10306980

  17. The Effect of Progressive Sentence Development Activities on 5th Graders' Description Skills

    ERIC Educational Resources Information Center

    Hamzadayi, Ergun

    2015-01-01

    The aim of this study was to examine the effect of progressive sentence development activities on 5th graders' description skills. The study was conducted based on the pretest-posttest quasi-experimental model with a control group. A total of 58 students participated in the study; 29 in the control group, and 29 in the experimental group. The…

  18. Solid waste initiative Macro Material Flow Modeling conceptual description and requirements

    SciTech Connect

    Holter, G.M.; Stapp, D.C.

    1993-01-01

    This report describes a Macro Material Flow Modeling (MMFM) concept and approach that are being adopted to develop a predictive modeling capability that can be used as the basis for evaluating potential impacts from various solid waste management system configurations and operating scenarios, as well as the impacts of various policies on solid waste quantities and compositions. This capability, as part of a broader Solid Waste Initiative at Pacific Northwest Laboratory, is intended to provide an increased understanding of solid waste as a disposal, energy, and resource problem on a national and global scale, particularly over the long term. The results of this increased understanding will eventually have an impact on a variety of US federal government activities, as well as on the activities of other entities. This increased understanding will also help provide the basis for subsequent activities under the Solid Waste Initiative. The report describes current solid waste management practices and their context, defines questions of interest relating to these practices, and proposes an approach that could be employed to analyze these practices and possible alternatives to them. A preliminary review, analysis, and summary of available data to support this approach are also provided.

  19. Active Surfaces and Interfaces of Soft Materials

    NASA Astrophysics Data System (ADS)

    Wang, Qiming

    A variety of intriguing surface patterns have been observed on developing natural systems, ranging from corrugated surface of white blood cells at nanometer scales to wrinkled dog skins at millimeter scales. To mimetically harness functionalities of natural morphologies, artificial transformative skin systems by using soft active materials have been rationally designed to generate versatile patterns for a variety of engineering applications. The study of the mechanics and design of these dynamic surface patterns on soft active materials are both physically interesting and technologically important. This dissertation starts with studying abundant surface patterns in Nature by constructing a unified phase diagram of surface instabilities on soft materials with minimum numbers of physical parameters. Guided by this integrated phase diagram, an electroactive system is designed to investigate a variety of electrically-induced surface instabilities of elastomers, including electro-creasing, electro-cratering, electro-wrinkling and electro-cavitation. Combing experimental, theoretical and computational methods, the initiation, evolution and transition of these instabilities are analyzed. To apply these dynamic surface instabilities to serving engineering and biology, new techniques of Dynamic Electrostatic Lithography and electroactive anti-biofouling are demonstrated.

  20. Active vibration damping using smart material

    NASA Technical Reports Server (NTRS)

    Baras, John S.; Yan, Zhuang

    1994-01-01

    We consider the modeling and active damping of an elastic beam using distributed actuators and sensors. The piezoelectric ceramic material (PZT) is used to build the actuator. The sensor is made of the piezoelectric polymer polyvinylidene fluoride (PVDF). These materials are glued on both sides of the beam. For the simple clamped beam, the closed loop controller has been shown to be able to extract energy from the beam. The shape of the actuator and its influence on the closed loop system performance are discussed. It is shown that it is possible to suppress the selected mode by choosing the appropriate actuator layout. It is also shown that by properly installing the sensor and determining the sensor shape we can further extract and manipulate the sensor signal for our control need.

  1. Activity Coefficient Derivatives of Ternary Systems Based on Scatchard's Neutral Electrolyte description

    SciTech Connect

    Miller, D G

    2007-05-16

    Activity coefficient derivatives with respect to molality are presented for the Scatchard Neutral Electrolyte description of a ternary common-ion electrolyte system. These quantities are needed for the calculation of 'diffusion Onsager coefficients' and in turn for tests of the Onsager Reciprocal Relations in diffusion. The usually-omitted b{sub 23} term is included. The direct SNE binary approximations and a further approximation are discussed. Binary evaluation strategies other than constant ionic strength are considered.

  2. Plasmonic Biofoam: A Versatile Optically Active Material.

    PubMed

    Tian, Limei; Luan, Jingyi; Liu, Keng-Ku; Jiang, Qisheng; Tadepalli, Sirimuvva; Gupta, Maneesh K; Naik, Rajesh R; Singamaneni, Srikanth

    2016-01-13

    Owing to their ability to confine and manipulate light at the nanoscale, plasmonic nanostructures are highly attractive for a broad range of applications. While tremendous progress has been made in the synthesis of size- and shape-controlled plasmonic nanostructures, their integration with other materials and application in solid-state is primarily through their assembly on rigid two-dimensional (2D) substrates, which limits the plasmonically active space to a few nanometers above the substrate. In this work, we demonstrate a simple method to create plasmonically active three-dimensional biofoams by integrating plasmonic nanostructures with highly porous biomaterial aerogels. We demonstrate that plasmonic biofoam is a versatile optically active platform that can be harnessed for numerous applications including (i) ultrasensitive chemical detection using surface-enhanced Raman scattering; (ii) highly efficient energy harvesting and steam generation through plasmonic photothermal heating; and (iii) optical control of enzymatic activity by triggered release of biomolecules encapsulated within the aerogel. Our results demonstrate that 3D plasmonic biofoam exhibits significantly higher sensing, photothermal, and loading efficiency compared to conventional 2D counterparts. The design principles and processing methodology of plasmonic aerogels demonstrated here can be broadly applied in the fabrication of other functional foams. PMID:26630376

  3. 40 CFR 465.20 - Applicability; description of the galvanized basis material subcategory.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... of pollutants into publicly owned treatment works from coil coating of galvanized basis material... galvanized basis material subcategory. 465.20 Section 465.20 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) COIL COATING POINT...

  4. 40 CFR 465.20 - Applicability; description of the galvanized basis material subcategory.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... of pollutants into publicly owned treatment works from coil coating of galvanized basis material... galvanized basis material subcategory. 465.20 Section 465.20 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) COIL COATING POINT...

  5. 40 CFR 465.20 - Applicability; description of the galvanized basis material subcategory.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... of pollutants into publicly owned treatment works from coil coating of galvanized basis material... galvanized basis material subcategory. 465.20 Section 465.20 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) COIL COATING POINT...

  6. Photonic crystals with active organic materials

    NASA Astrophysics Data System (ADS)

    Wu, Yeheng

    The concept of photonic crystals, which involves periodically arranged dielectrics that form a new type of material having novel photonic properties, was first proposed about two decades ago. Since then, a number of applications in photonic technology have been explored. Specifically, organic and hybrid photonic crystals are promising because of the unique advantages of the organic materials. A one-dimensional (1D) photonic crystal (multilayer) has high reflectance across a certain wavelength range. We report on studies of 1D multilayer polymer films that were fabricated using spin-coating, free film stacking, and co-extrusion techniques. For example, a stack fabricated by placing a laser dye-doped gain medium between two multilayer reflecting polymer films forms a micro-resonator laser or distributed Bragg laser. The resulting laser system is made entirely of plastic and is only several tens of micrometers in thickness. When the gain, a dye-doped medium, comprises one type of a two-type multilayer film, it results a laser exhibiting distributed feedback. At the edge of the photonic band, the group velocity becomes small and the density of photon states becomes high, which leads to laser emission. Such distributed feedback lasers were fabricated using the co-extrusion technique. The refractive indices and the photonic lattice determine the photonic band gap, which can be tuned by changing these parameters. Materials with Kerr nonlinearity exhibit a change in refractive index depending on the incident intensity of the light. To demonstrate such switching, electrochemical etching techniques on silicon wafers were used to form two-dimensional (2D) photonic crystals. By incorporating the nonlinear organic material into the 2D structure, we have made all-optical switches. The reflection of a beam from the 2D photonic crystal can be controlled by another beam because it induces a refractive index change in the active material by altering the reflection band. A mid

  7. A Description and Source Listing of Curriculum Materials in Agricultural Education, 1971-1972.

    ERIC Educational Resources Information Center

    American Vocational Association, Washington, DC. Agricultural Education Div.

    Members of the Curriculum Materials Committee collect materials available to them prior to each American Vocational Association Meeting. The resulting bibliography contains current, non-commercial materials developed by persons in vocational education in agriculture for use in that field, but of interest beyond the state in which it was developed.…

  8. 40 CFR 466.40 - Applicability; description of the copper basis material subcategory.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS PORCELAIN ENAMELING POINT SOURCE CATEGORY... into publicly owned treatment works from porcelain enameling of copper basis materials....

  9. 40 CFR 466.40 - Applicability; description of the copper basis material subcategory.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) PORCELAIN ENAMELING POINT SOURCE... into publicly owned treatment works from porcelain enameling of copper basis materials....

  10. 40 CFR 466.40 - Applicability; description of the copper basis material subcategory.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) PORCELAIN ENAMELING POINT SOURCE... into publicly owned treatment works from porcelain enameling of copper basis materials....

  11. 40 CFR 466.40 - Applicability; description of the copper basis material subcategory.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) PORCELAIN ENAMELING POINT SOURCE... into publicly owned treatment works from porcelain enameling of copper basis materials....

  12. 40 CFR 465.20 - Applicability; description of the galvanized basis material subcategory.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS COIL COATING POINT SOURCE CATEGORY Galvanized... into publicly owned treatment works from coil coating of galvanized basis material coils....

  13. 40 CFR 465.20 - Applicability; description of the galvanized basis material subcategory.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS COIL COATING POINT SOURCE CATEGORY Galvanized... into publicly owned treatment works from coil coating of galvanized basis material coils....

  14. Description of a Multipurpose Processing and Storage Complex for the Hanford Site`s radioactive material

    SciTech Connect

    Nyman, D.H.; Wolfe, B.A.; Hoertkorn, T.R.

    1993-05-01

    The mission of the US Department of Energy`s (DOE) Hanford Site has changed from defense nuclear materials production to that of waste management/disposal and environmental restoration. ne Multipurpose Processing and Storage Complex (MPSC) is being designed to process discarded waste tank internal hardware contaminated with mixed wastes, failed melters from the vitrification plant, and other Hanford Site high-level solid waste. The MPSC also will provide interim storage of other radioactive materials (irradiated fuel, canisters of vitrified high-level waste [HLW], special nuclear material [SNM], and other designated radioactive materials).

  15. A Description and Source Listing of Curriculum Materials in Agricultural Education. 1972-73.

    ERIC Educational Resources Information Center

    American Vocational Association, Washington, DC. Agricultural Education Div.

    Listed are 246 curriculum material items in ten categories: field crops, horticulture, forestry, animal science, soils, diseases and pests, agricultural engineering, agricultural economics, agricultural occupations, and professional. Most materials are annotated and all are classified according to the AGPEX filing system. Bibliographic and…

  16. 40 CFR 411.30 - Applicability; description of the materials storage piles runoff subcategory.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... products, finished products and waste materials which are used in or derived from the manufacture of cement... materials storage piles runoff subcategory. 411.30 Section 411.30 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS CEMENT MANUFACTURING POINT SOURCE...

  17. Descriptions of experiments selected for the Space Transportation System (STS) materials processing in space program

    NASA Technical Reports Server (NTRS)

    Naumann, R. J. (Editor)

    1978-01-01

    Summaries are presented for the first group of materials processing experiments planned for a shuttle mission. Outlined are the objectives, the approach, the rationale for the use of space, and the anticipated results for each experiment.

  18. Descriptive epidemiology of physical activity among Omani adults: the Oman World Health Survey, 2008.

    PubMed

    Mabry, R M; Morsi, M; Al-Lawati, J A; Owen, N

    2016-04-28

    There is an increasing burden of obesity and obesity-related noncommunicable diseases in Gulf Cooperation Council countries, including Oman. This descriptive, epidemiological study assessed physical activity among 2977 Omani adults using a population-based household survey in 2008. Overall, 54.2% of men and 41.6% of women were physically active; the rate was higher in younger cohorts and varied significantly by region of residence. Physical activity related to the transportation (walking and cycling) domain was higher than in the leisure or work domains. Unmarried men aged 30-39 years were twice as likely to be physically active (OR 2.25) and unmarried women aged 40+ years were half as likely to be active (OR 0.58) than their married counterparts. Young women not working were less active (OR 0.18) than working women. Higher education was significantly associated with leisure activity for men aged 30+ years and women aged 40+ years. Further research to understand regional variations and to identify culturally appropriate strategies to promote physical activity is required.

  19. Descriptive epidemiology of physical activity among Omani adults: the Oman World Health Survey, 2008.

    PubMed

    Mabry, R M; Morsi, M; Al-Lawati, J A; Owen, N

    2016-02-01

    There is an increasing burden of obesity and obesity-related noncommunicable diseases in Gulf Cooperation Council countries, including Oman. This descriptive, epidemiological study assessed physical activity among 2977 Omani adults using a population-based household survey in 2008. Overall, 54.2% of men and 41.6% of women were physically active; the rate was higher in younger cohorts and varied significantly by region of residence. Physical activity related to the transportation (walking and cycling) domain was higher than in the leisure or work domains. Unmarried men aged 30-39 years were twice as likely to be physically active (OR 2.25) and unmarried women aged 40+ years were half as likely to be active (OR 0.58) than their married counterparts. Young women not working were less active (OR 0.18) than working women. Higher education was significantly associated with leisure activity for men aged 30+ years and women aged 40+ years. Further research to understand regional variations and to identify culturally appropriate strategies to promote physical activity is required. PMID:27180738

  20. 105-K Basin material design basis feed description for spent nuclear fuel project facilities

    SciTech Connect

    Praga, A.N.

    1998-01-08

    Revisions 0 and 0A of this document provided estimated chemical and radionuclide inventories of spent nuclear fuel and sludge currently stored within the Hanford Site`s 105-K Basins. This Revision (Rev. 1) incorporates the following changes into Revision 0A: (1) updates the tables to reflect: improved cross section data, a decision to use accountability data as the basis for total Pu, a corrected methodology for selection of the heat generation basis fee, and a revised decay date; (2) adds section 3.3.3.1 to expand the description of the approach used to calculate the inventory values and explain why that approach yields conservative results; (3) changes the pre-irradiation braze beryllium value.

  1. Development of a General Shocked-Materials-Response Description for Simulations

    SciTech Connect

    Steven M. Valone

    2000-07-01

    This report outlines broad modeling issues pertaining to polymeric materials behavior under detonation conditions. Models applicable system wide are necessary to cope with the broad range of polymers and complex composite forms that can appear in Laboratory weapons systems. Nine major topics are discussed to span the breadth of materials, forms, and physical phenomena encountered when shocking polymers and foams over wide ranges of temperatures, pressures, shock strengths, confinement conditions, and geometries. The recommendations for directions of more intensive investigation consider physical fidelity, computational complexity, and application over widely varying physical conditions of temperature, pressure, and shock strength.

  2. Magnesium Based Materials and their Antimicrobial Activity

    NASA Astrophysics Data System (ADS)

    Robinson, Duane Allan

    The overall goals of this body of work were to characterize the antimicrobial properties of magnesium (Mg) metal and nano-magnesium oxide (nMgO) in vitro, to evaluate the in vitro cytotoxicity of Mg metal, and to incorporate MgO nanoparticles into a polymeric implant coating and evaluate its in vitro antimicrobial properties. In the course of this work it was found that Mg metal, Mg-mesh, and nMgO have in vitro antimicrobial properties that are similar to a bactericidal antibiotic. For Mg metal, the mechanism of this activity appears to be related to an increase in pH (i.e. a more alkaline environment) and not an increase in Mg2+. Given that Mg-mesh is a Mg metal powder, the assumption is that it has the same mechanism of activity as Mg metal. The mechanism of activity for nMgO remains to be elucidated and may be related to a combination of interaction of the nanoparticles with the bacteria and the alkaline pH. It was further demonstrated that supernatants from suspensions of Mg-mesh and nMgO had the same antimicrobial effect as was noted when the particles were used. The supernatant from Mg-mesh and nMgO was also noted to prevent biofilm formation for two Staphylococcus strains. Finally, poly-epsilon-caprolactone (PCL) composites of Mg-mesh (PCL+Mg-mesh) and nMgO (PCL+nMgO) were produced. Coatings applied to screws inhibited growth of Escherichia coli and Pseudomonas aeruginosa and in thin disc format inhibited the growth of Staphylococcus aureus in addition to the E. coli and P. aeruginosa. Pure Mg metal was noted to have some cytotoxic effect on murine fibroblast and osteoblast cell lines, although this effect needs to be characterized further. To address the need for an in vivo model for evaluating implant associated infections, a new closed fracture osteomyelitis model in the femur of the rat was developed. Magnesium, a readily available and inexpensive metal was shown to have antimicrobial properties that appear to be related to its corrosion products and

  3. A Description and Source Listing of Curriculum Materials in Agricultural Education, 1969-1970.

    ERIC Educational Resources Information Center

    American Vocational Association, Washington, DC. Agricultural Education Div.

    The purpose of this annotated bibliography is to provide teachers of vocational agriculture, agricultural supervisors, and agricultural teacher educators with information on current curriculum materials available to them. Classified according to the AGDEX filing system, the 163 references are grouped under the headings: (1) Field Crops, (2)…

  4. A Description and Source Listing of Curriculum Materials in Agricultural Education, 1970-1971.

    ERIC Educational Resources Information Center

    American Vocational Association, Washington, DC. Agricultural Education Div.

    To provide teachers of vocational agriculture, agricultural supervisors, and agricultural teacher educators with information on current curriculum materials available to them, this annotated bibliography presents 207 references classified according to the AGDEX filing system. Topics are: (1) Field Crops, (2) Horticulture, (3) Forestry, (4) Animal…

  5. A Descriptive Study on the Use of Materials in Vocabulary Lessons

    ERIC Educational Resources Information Center

    Holmes, Kerry; Holmes, Stacy V.; Watts, Karley

    2012-01-01

    Vocabulary knowledge is important because it is highly correlated with content area learning. Strategies for vocabulary instruction recommend using new words in multiple contexts as key to learning. To date, the term "multiple contexts" emphasizes written contexts, not three-dimensional concrete material contexts. This article describes the…

  6. General description of the adsorption of proteins at their iso-electric point in nanoporous materials.

    PubMed

    Sang, Lung-Ching; Vinu, Ajayan; Coppens, Marc-Olivier

    2011-11-15

    A simple but remarkably precise geometric pore-filling model is proposed and experimentally validated for the adsorption of proteins at their iso-electric point (pI) in nanoporous materials. Three different globular proteins-lysozyme, myoglobin, and bovine serum albumin-are used as model proteins to study protein adsorption on two types of ordered mesoporous materials-silica and carbon-which allows us to study the effects of protein and surface structure on the protein adsorption mechanism. The geometric pore-filling model confirms that proteins are closely packed inside the pore channels of mesoporous materials, leading to an exceptionally large protein loading capacity. A relationship for the amount of adsorbed protein as a function of protein size, nanopore volume, and pore diameter is derived. The pore space gradually fills up to complete packing of the available pore space at the highest protein concentration. The high precision of the geometric pore-filling model demonstrates its utility to predict the protein adsorption capacity of ordered nanoporous materials.

  7. Theoretical description of structural and electronic properties of organic photovoltaic materials.

    PubMed

    Zhugayevych, Andriy; Tretiak, Sergei

    2015-04-01

    We review recent progress in the modeling of organic solar cells and photovoltaic materials, as well as discuss the underlying theoretical methods with an emphasis on dynamical electronic processes occurring in organic semiconductors. The key feature of the latter is a strong electron-phonon interaction, making the evolution of electronic and structural degrees of freedom inseparable. We discuss commonly used approaches for first-principles modeling of this evolution, focusing on a multiscale framework based on the Holstein-Peierls Hamiltonian solved via polaron transformation. A challenge for both theoretical and experimental investigations of organic solar cells is the complex multiscale morphology of these devices. Nevertheless, predictive modeling of photovoltaic materials and devices is attainable and is rapidly developing, as reviewed here. PMID:25580623

  8. Theoretical description of structural and electronic properties of organic photovoltaic materials.

    PubMed

    Zhugayevych, Andriy; Tretiak, Sergei

    2015-04-01

    We review recent progress in the modeling of organic solar cells and photovoltaic materials, as well as discuss the underlying theoretical methods with an emphasis on dynamical electronic processes occurring in organic semiconductors. The key feature of the latter is a strong electron-phonon interaction, making the evolution of electronic and structural degrees of freedom inseparable. We discuss commonly used approaches for first-principles modeling of this evolution, focusing on a multiscale framework based on the Holstein-Peierls Hamiltonian solved via polaron transformation. A challenge for both theoretical and experimental investigations of organic solar cells is the complex multiscale morphology of these devices. Nevertheless, predictive modeling of photovoltaic materials and devices is attainable and is rapidly developing, as reviewed here.

  9. Recharacterization of Rhinophis dorsimaculatus Deraniyagala, 1941 (Serpentes: Uropeltidae), including description of new material.

    PubMed

    Gower, David J; Wickramasinghe, L J Mendis

    2016-01-01

    The Sri Lankan uropeltid (shieldtail) snake Rhinophis dorsimaculatus Deraniyagala, 1941 was described originally from two specimens that were subsequently lost. The small amount of previously published data and lack of published colour photographs made this one of South Asia's most poorly known snake species, and this resulted in at least one instance of taxonomic misidentification. An additional 10 specimens from a historical collection from the vicinity of the type locality recently came to light. This material is reviewed and documented and the species recharacterized. An additional locality for the species is reported. The newly reported material helps to corroborate the taxonomic validity and distinctiveness of Rhinophis dorsimaculatus. The species is readily distinguished from congeners by having 227 or more ventral scales; a large, dorsally carinate rostral shield; posterior margins of paired anals that are largely separated by the posteriormost ventral scale; and a distinctive colour pattern with bilaterally asymmetrical dark blotches within a broad, pale middorsal stripe and regularly punctate flanks. PMID:27615880

  10. Energetic materials research and development activities at Sandia National Laboratories supported under DP-10 programs

    SciTech Connect

    Ratzel, A.C. III

    1998-09-01

    This report provides summary descriptions of Energetic Materials (EM) Research and Development activities performed at Sandia National Laboratories and funded through the Department of Energy DP-10 Program Office in FY97 and FY98. The work falls under three major focus areas: EM Chemistry, EM Characterization, and EM Phenomenological Model Development. The research supports the Sandia component mission and also Sandia's overall role as safety steward for the DOE Nuclear Weapons Complex.

  11. Use of a porous material description of forests in infrasonic propagation algorithms.

    PubMed

    Swearingen, Michelle E; White, Michael J; Ketcham, Stephen A; McKenna, Mihan H

    2013-10-01

    Infrasound can propagate very long distances and remain at measurable levels. As a result infrasound sensing is used for remote monitoring in many applications. At local ranges, on the order of 10 km, the influence of the presence or absence of forests on the propagation of infrasonic signals is considered. Because the wavelengths of interest are much larger than the scale of individual components, the forest is modeled as a porous material. This approximation is developed starting with the relaxation model of porous materials. This representation is then incorporated into a Crank-Nicholson method parabolic equation solver to determine the relative impacts of the physical parameters of a forest (trunk size and basal area), the presence of gaps/trees in otherwise continuous forest/open terrain, and the effects of meteorology coupled with the porous layer. Finally, the simulations are compared to experimental data from a 10.9 kg blast propagated 14.5 km. Comparison to the experimental data shows that appropriate inclusion of a forest layer along the propagation path provides a closer fit to the data than solely changing the ground type across the frequency range from 1 to 30 Hz. PMID:24116403

  12. Use of a porous material description of forests in infrasonic propagation algorithms.

    PubMed

    Swearingen, Michelle E; White, Michael J; Ketcham, Stephen A; McKenna, Mihan H

    2013-10-01

    Infrasound can propagate very long distances and remain at measurable levels. As a result infrasound sensing is used for remote monitoring in many applications. At local ranges, on the order of 10 km, the influence of the presence or absence of forests on the propagation of infrasonic signals is considered. Because the wavelengths of interest are much larger than the scale of individual components, the forest is modeled as a porous material. This approximation is developed starting with the relaxation model of porous materials. This representation is then incorporated into a Crank-Nicholson method parabolic equation solver to determine the relative impacts of the physical parameters of a forest (trunk size and basal area), the presence of gaps/trees in otherwise continuous forest/open terrain, and the effects of meteorology coupled with the porous layer. Finally, the simulations are compared to experimental data from a 10.9 kg blast propagated 14.5 km. Comparison to the experimental data shows that appropriate inclusion of a forest layer along the propagation path provides a closer fit to the data than solely changing the ground type across the frequency range from 1 to 30 Hz.

  13. Testing of aircraft passenger seat cushion materials. Full scale, test description and results, volume 1

    NASA Technical Reports Server (NTRS)

    Schutter, K. J.; Gaume, J. G.; Duskin, F. E.

    1981-01-01

    Eight different seat cushion configurations were subjected to full-scale burn tests. Each cushion configuration was tested twice for a total of sixteen tests. Two different fire sources were used. They consisted of one liter of Jet A fuel for eight tests and a radiant energy source with propane flame for eight tests. Both fire sources were ignited by a propane flame. During each test, data were recorded for smoke density, cushion temperatures, radiant heat flux, animal response to combustion products, rate of weight loss of test specimens, cabin temperature, and for the type and content of gas within the cabin atmosphere. When compared to existing passenger aircraft seat cushions, the test specimens incorporating a fire barrier and those fabricated from advanced materials, using improved construction methods, exhibited significantly greater fire resistance.

  14. Descriptive statistics tables from a detailed analysis of the National Human Activity Pattern Survey (NHAPS) data

    SciTech Connect

    Tsang, A.M.; Klepeis, N.E.

    1996-07-01

    Detailed results tables are presented from an unweighted statistical analysis of selected portions of the 1992--1994 National Human Activity Pattern Survey (NHAPS) data base. This survey collected data on the potential exposure of Americans to important household pollutants. Randomly selected individuals (9,386) supplied minute-by-minute diaries spanning a 24-hour day as well as follow-up questions on specific exposure types. Selected 24-hour diary locations and activities, selected regroupings of the 24-hour diary locations, activities, and smoker-present categories, and most of the follow-up question variables in the NHAPS data base were statistically analyzed across 12 subgroups (gender, age, Hispanic, education, employment, census region, day-of-week, season, asthma, angina and bronchitis/emphysema). Overall statistics were also generated for the 9,386 total respondents. Tables show descriptive statistics (including frequency distributions) of time spent and frequency of occurrence in each of 39 locations and for 22 activities (that were experienced by more than 50 respondents), along with equivalent tables for 10 regrouped locations (Residence-Indoors, Residence-Outdoors, Inside Vehicle, Near Vehicle, Other Outdoor, Office/Factory, Mall/Store, Public Building, Bar/Restaurant, Other Indoor), seven regrouped activities and smoker present. Tables of frequency distributions of time spent in exposure activities, or the frequency of occurrence of exposure activities, as determined from the follow up questions that were analyzed are also presented. Detailed indices provide page numbers for each table. An Appendix contains a condensed listing of the questionnaires (Versions A and B for adults, child-direct and child-proxy interview types), including the question number, the NHAPS data base variable name, and the verbatim question text.

  15. Test design description for the Fusion Materials Open Test Assembly (Fusion MOTA-2A): Volume 1A, Part 1

    SciTech Connect

    Bauer, R.E.

    1988-11-01

    This document encompasses the test requirements, hardware design, fabrication, and safety analysis for the Fusion Materials Open Test Assembly experiment for irradiation in FFTF Cycle 11 (Fusion MOTA-2A). Fusion MOTA is equally shared by the US Fusion Material (DOE), Japanese Fusion Materials (MONBUSHO), and BEATRIX-II (IEA) programs. In the interest of providing optimum use of the irradiation space in the Fusion MOTA-2A and LMR MOTA-1G, eight of the Fusion MOTA canisters will be placed in MOTA-1G and an equal number of LMR canisters placed in Fusion MOTA-2A (Powell/Doran 1988). This eliminates the need to process Fusion MOTA-2A through the IEM cell prior to insertion for FFTF Cycle 11A. The LMR MOTA design and safety analysis (Greenslade 1984) is the basis for much of this design and safety analysis report. This design description and safety analysis for the Fusion MOTA-2A is presented per the outline given in Chapter IV of the FTR User`s Guide (Taylor 1978). 35 refs., 17 figs., 9 tabs.

  16. Activation of materials proposed for use in superconducting linac applications

    SciTech Connect

    Hanson, A.L.; Snead, C.L.; Greene, G.A.; Chan, K.C.D.; Safa, H.

    1998-01-01

    Samples of construction materials proposed for use in both superconducting and conventional high-power linear accelerators have been activated with 800 and 2,000 MeV protons to study the decay characteristics of these activated materials. Irradiation times ranged from 10 minutes to 18.67 hours. The decay characteristics of these activated materials were measured and compared to calculated decay curves based on simplified assumptions.

  17. Analyses of Oxyanion Materials by Prompt Gamma Activation Analysis

    SciTech Connect

    Firestone, Richard B; Perry, D.L.; English, G.A.; Firestone, R.B.; Leung, K.-N.; Garabedian, G.; Molnar, G.L.; Revay, Zs.

    2008-03-24

    Prompt gamma activation analysis (PGAA) has been used to analyze metal ion oxyanion materials that have multiple applications, including medicine, materials, catalysts, and electronics. The significance for the need for accurate, highly sensitive analyses for the materials is discussed in the context of quality control of end products containing the parent element in each material. Applications of the analytical data for input to models and theoretical calculations related to the electronic and other properties of the materials are discussed.

  18. Active nematic materials with substrate friction.

    PubMed

    Thampi, Sumesh P; Golestanian, Ramin; Yeomans, Julia M

    2014-12-01

    Active turbulence in dense active systems is characterized by high vorticity on a length scale that is large compared to that of individual entities. We describe the properties of active turbulence as momentum propagation is screened by frictional damping. As friction is increased, the spacing between the walls in the nematic director field decreases as a consequence of the more rapid velocity decays. This leads to, first, a regime with more walls and an increased number of topological defects, and then to a jammed state in which the walls deliminate bands of opposing flow, analogous to the shear bands observed in passive complex fluids. PMID:25615093

  19. Biodegradation and biocompatibility of mechanically active magnetoelastic materials

    NASA Astrophysics Data System (ADS)

    Holmes, Hal R.; DeRouin, Andrew; Wright, Samantha; Riedemann, Travor M.; Lograsso, Thomas A.; Rajachar, Rupak M.; Ghee Ong, Keat

    2014-09-01

    Magnetoelastic (ME) materials have many advantages for use as sensors and actuators due to their wireless, passive nature. This paper describes the application of ME materials as biodegradable implants with controllable degradation rates. Experiments have been conducted to show that degradation rates of ME materials are dependent on the material compositions. In addition, it was shown that the degradation rates of the ME materials can be controlled remotely by applying a magnetic field, which causes the ME materials to generate low-magnitude vibrations that hasten their degradation rates. Another concern of ME materials for medical applications is biocompatibility. Indirect cytotoxicity analyses were performed on two types of ME materials: Metglas™ 2826 MB (FeNiMoB) and iron-gallium alloy. While results indicate Metglas is not biocompatible, the degradation products of iron-gallium materials have shown no adverse effects on cell viability. Overall, these results present the possibility of using ME materials as biodegradable, magnetically-controlled active implants.

  20. The CCMC's national study of case manager job descriptions: an understanding of the activities, role relationships, knowledges, skills, and abilities.

    PubMed

    Tahan, Hussein A; Huber, Diane L

    2006-01-01

    Defining the roles and functions of case managers is crucial in today's healthcare environment and necessary for the case management field. One way to address this issue is through the examination of case managers' job descriptions used in various healthcare organizations. The study reported herein used qualitative analysis procedures and the latent class cluster analysis method to examine a national sample of 1028 job descriptions of case managers. The study identified the activities, role relationships, knowledge, skills, and abilities of case managers working in varied settings. It also described the changes that occurred in the practice of case management, based on these job descriptions, over 5 years: from the mid-1990s until the early 2000s. One benefit of this study was a change in one eligibility criterion of the CCM credential. Another was the development of a taxonomy of case managers' roles and functions that can be used as a step toward standardization of case managers' job descriptions.

  1. In vitro antibacterial activity of different pulp capping materials

    PubMed Central

    Beltrami, Riccardo; Colombo, Marco; Ceci, Matteo; Dagna, Alberto; Chiesa, Marco

    2015-01-01

    Background Direct pulp capping involves the application of a dental material to seal communications between the exposed pulp and the oral cavity (mechanical and carious pulp exposures) in an attempt to act as a barrier, protect the dental pulp complex and preserve its vitality. The aim of this study was to evaluate and compare, by the agar disc diffusion test, the antimicrobial activity of six different pulp-capping materials: Dycal (Dentsply), Calcicur (Voco), Calcimol LC (Voco), TheraCal LC (Bisco), MTA Angelus (Angelus), Biodentine (Septodont). Material and Methods Streptococcus salivarius, Streptococcus sanguis and Streptococcus mutans strains were selected to evaluate the antimicrobial activity by the agar disc diffusion test of different pulp capping materials. Paper disks were impregnated whit each pulp capping materials and placed onto culture agar-plates pre-adsorbed with bacterial cells and further incubated for 24 h at 37°C. The growth inhibition zones around each pulp capping materials were recorded and compared for each bacterial strain. Results For the investigation of the antibacterial properties the ANOVA showed the presence of significant differences among the various materials. Tukey test showed that MTA-based materials induced lower growth inhibition zones. Conclusions MTA-based products show a discrete antibacterial activity varying from calcium hydroxide-based materials which present an higher antibacterial activity. Key words:Agar disc diffusion test, antimicrobial activity, calcium hydroxide, MTA, pulp capping materials. PMID:26644833

  2. Child's Play: An Activities and Materials Handbook.

    ERIC Educational Resources Information Center

    Trencher, Barbara R.

    This handbook, the third printing of the original 1976 edition, presents an eclectic combination of activities gathered from parents and teachers of preschool children, with a focus on the process rather than the product of learning. Its goal is the establishment of positive experiences and sound interpersonal relationships between adults and…

  3. Microscale damping using thin film active materials

    NASA Astrophysics Data System (ADS)

    Kerrigan, Catherine A.; Ho, Ken K.; Mohanchandra, K. P.; Carman, Gregory P.

    2007-04-01

    This paper focuses on understanding and developing a new approach to dampen MEMS structures using both experiments and analytical techniques. Thin film Nitinol and thin film Terfenol-D are evaluated as a damping solution to the micro scale damping problem. Stress induced twin boundary motion in Nitinol is used to passively dampen potentially damaging vibrations. Magnetic domain wall motion is used to passively dampen vibration in Terfenol-D. The thin films of Nitinol, Nitinol/Silicon laminates and Nitinol/Terfenol-D/Nickel laminates have been produced using a sputter deposition process and damping properties have been evaluated. Dynamic testing shows substantial damping (tan δ) measurable in each case. Nitinol film samples were tested in the Differential Scanning Calorimetry (DSC) to determine phase transformation temperatures. The twin boundary mechanism by which energy absorption occurs is present at all points below the Austenite start temperature (approximately 69°C in our film) and therefore allows damping at cold temperatures where traditional materials fail. Thin film in the NiTi/Si laminate was found to produce substantially higher damping (tan δ = 0.28) due to the change in loading condition. The NiTi/Si laminate sample was tested in bending allowing the twin boundaries to be reset by cyclic tensile and compressive loads. The thin film Terfenol-D in the Nitinol/Terfenol-D/Nickel laminate was shown to produce large damping (tan δ = 0.2). In addition to fabricating and testing, an analytical model of a heterogeneous layered thin film damping material was developed and compared to experimental work.

  4. Activation of a photosensitive pharmaceutical agent by a triboluminescent material

    NASA Astrophysics Data System (ADS)

    Yuen, Stacey; Schreyer, Magdalena; Finlay, W. H.; Löbenberg, R.; Moussa, W.

    2006-03-01

    Given the recent emphasis on applications of triboluminescent materials, we investigate the ability of a triboluminescent material to activate a photosensitive pharmaceutical agent. Using compressed sucrose doped with wintergreen, which luminesces when fractured, we demonstrate the activation of riboflavin (vitamin B2), a photosensitizer. A product of activation is the highly reactive singlet oxygen. We add ascorbic acid (vitamin C), an antioxidant, and measure the amount of ascorbic acid oxidation to correlate with the amount of riboflavin activation. Up to 17% ascorbic acid oxidation is observed, indicating triboluminescence is worth exploring as a mechanism for activation of photosensitizers in photodynamic therapy.

  5. Activation of a photosensitive pharmaceutical agent by a triboluminescent material

    SciTech Connect

    Yuen, Stacey; Schreyer, Magdalena; Finlay, W.H.; Loebenberg, R.; Moussa, W.

    2006-03-20

    Given the recent emphasis on applications of triboluminescent materials, we investigate the ability of a triboluminescent material to activate a photosensitive pharmaceutical agent. Using compressed sucrose doped with wintergreen, which luminesces when fractured, we demonstrate the activation of riboflavin (vitamin B2), a photosensitizer. A product of activation is the highly reactive singlet oxygen. We add ascorbic acid (vitamin C), an antioxidant, and measure the amount of ascorbic acid oxidation to correlate with the amount of riboflavin activation. Up to 17% ascorbic acid oxidation is observed, indicating triboluminescence is worth exploring as a mechanism for activation of photosensitizers in photodynamic therapy.

  6. Product Descriptions; Word Processors and Writing Activities for the Elementary Grades. A MicroSIFT Quarterly Report.

    ERIC Educational Resources Information Center

    Batey, Anne; Ricketts, Dick

    Intended to help educators choose the most appropriate word processing products for elementary school writing instruction, this report provides extensive information on 12 word processor and 13 writing activity software products. A list of components, general descriptions, comments and evaluations are included for each product. The products…

  7. Alkali-activated cementitious materials: Mechanisms, microstructure and properties

    NASA Astrophysics Data System (ADS)

    Jiang, Weimin

    The goal of this study was to examine the activation reaction, microstructure, properties, identify the mechanisms of activation, and achieve an enhanced understanding of activation processes occurring during the synthesis of alkali activated cementitious materials (AAC). The discussions classify the following categories. (1) alkali activated slag cement; (2) alkali activated portland-slag cement; (3) alkali activated fly ash-slag cement; (4) alkali activated pozzolana-lime cement; (5) alkali activated pozzolana cement. The activators involved are NaOH, KOH; Nasb2SOsb4;\\ Nasb2COsb3;\\ CaSOsb4, and soluble silicate of sodium and potassium. The effect of alkali activation on the microstructure of these materials were analyzed at the micro-nanometer scale by SEM, EDS, ESEM, and TEM. Also sp{29}Si and sp{27}Al MAS-NMR, IR, Raman, TGA, and DTA were performed to characterize the phase in these systems. Slag, fly ash, silica fume, as well as blended cements containing mixtures of these and other components were characterized. A set of ordinary portland cement paste samples served as a control. This study confirmed that AAC materials have great potential because they could generate very early high strength, greater durability and high performance. Among the benefits to be derived from this research is a better understanding of the factors that control concrete properties when using AAC materials, and by controlling the chemistry and processing to produce desired microstructures and properties, as well as their durability.

  8. Advanced low-activation materials. Fibre-reinforced ceramic composites

    NASA Astrophysics Data System (ADS)

    Fenici, P.; Scholz, H. W.

    1994-09-01

    A serious safety and environmental concern for thermonuclear fusion reactor development regards the induced radioactivity of the first wall and structural components. The use of low-activation materials (LAM) in a demonstration reactor would reduce considerably its potential risk and facilitate its maintenance. Moreover, decommissioning and waste management including disposal or even recycling of structural materials would be simplified. Ceramic fibre-reinforced SiC materials offer highly appreciable low activation characteristics in combination with good thermomechanical properties. This class of materials is now under experimental investigation for structural application in future fusion reactors. An overview on the recent results is given, covering coolant leak rates, thermophysical properties, compatibility with tritium breeder materials, irradiation effects, and LAM-consistent purity. SiC/SiC materials present characteristics likely to be optimised in order to meet the fusion application challenge. The scope is to put into practice the enormous potential of inherent safety with fusion energy.

  9. Calcium alloy as active material in secondary electrochemical cell

    DOEpatents

    Roche, Michael F.; Preto, Sandra K.; Martin, Allan E.

    1976-01-01

    Calcium alloys such as calcium-aluminum and calcium-silicon, are employed as active material within a rechargeable negative electrode of an electrochemical cell. Such cells can use a molten salt electrolyte including calcium ions and a positive electrode having sulfur, sulfides, or oxides as active material. The calcium alloy is selected to prevent formation of molten calcium alloys resulting from reaction with the selected molten electrolytic salt at the cell operating temperatures.

  10. Optically Active Hybrid Materials Constructed from Helically Substituted Polyacetylenes.

    PubMed

    Zhang, Huanyu; Zhao, Biao; Deng, Jianping

    2016-04-01

    Functional materials derived from synthetic helical polymers are attracting increasing interest. Helically substituted polyacetylenes (HSPAs) are especially interesting as typical artificial helical polymers. In recent years, we designed and prepared a series of functional materials based on HSPAs and inorganic materials. The target is to establish some novel hybrid materials that combine the superior properties of both. The examined inorganic materials include silica, graphene, and magnetic Fe3 O4 nanoparticles. Such new functional materials hold great promise and are expected to find practical applications, for instance, as chiral absorbents, chiral sensors, chiral selectors for inducing enantioselective crystallization, chiral catalysts towards asymmetric catalysis, and chiral carriers for enantioselective release. The Personal Account summarizes our major achievements in preparing optically active hybrid materials. We hope it will speed up progress in chiral-related research areas.

  11. Low Specific Activity materials concepts are being reevaluated

    SciTech Connect

    Rawl, R.R.

    1993-10-01

    Many types of radioactive low-level waste are classified, packaged, and transported as Low-Specific Activity (LSA) material. The transportation regulations allow LSA materials to be shipped in economical packagings and, under certain conditions, waives compliance with other detailed requirements such as labeling. The fundamental concepts which support the LSA category are being thoroughly reevaluated to determine the defensibility of the provisions. A series of national and international events are leading to the development of new dose models which are likely to fundamentally change the ways these materials are defined. Similar basis changes are likely for the packaging requirements applicable to these materials.

  12. Fusion materials development program in the broader approach activities

    NASA Astrophysics Data System (ADS)

    Nishitani, T.; Tanigawa, H.; Jitsukawa, S.; Nozawa, T.; Hayashi, K.; Yamanishi, T.; Tsuchiya, K.; Möslang, A.; Baluc, N.; Pizzuto, A.; Hodgson, E. R.; Laesser, R.; Gasparotto, M.; Kohyama, A.; Kasada, R.; Shikama, T.; Takatsu, H.; Araki, M.

    2009-04-01

    Breeding blankets are the most important components in DEMO. The DEMO blanket has to withstand high neutron flux typically 15-30 dpa/year under continuous operation. Therefore integrated and effective development of blanket structural materials and breeding/multiplying materials is essential in the blanket development for DEMO. In parallel to the ITER program, broader approach (BA) activities are initiated by EU and Japan. Based on the common interest of each party towards DEMO, R&D on reduced activation ferritic martensitic (RAFM) steels as a DEMO blanket structural material, SiC f/SiC composites which have potential for use in DEMO blankets, advanced tritium breeders and neutron multiplier for DEMO blankets, and tritium technologies including tritium behavior studies in advanced materials for DEMO blanket applications will be carried out as a part of the BA activities.

  13. Equipment and Materials for Initiating Musical Activities in the Preschool.

    ERIC Educational Resources Information Center

    Miller, Samuel D.

    Music activities are an important part of the preschool experience, yet these activities are often guided by teachers who have had little musical training. Lack of formal music training can be greatly compensated for by access to quality equipment and materials. These resources include a basic accompanying instrument, toy instruments, a durable…

  14. Design of electro-active polymer gels as actuator materials

    NASA Astrophysics Data System (ADS)

    Popovic, Suzana

    Smart materials, alternatively called active or adaptive, differ from passive materials in their sensing and activation capability. These materials can sense changes in environment such as: electric field, magnetic field, UV light, pH, temperature. They are capable of responding in numerous ways. Some change their stiffness properties (electro-rheological fluids), other deform (piezos, shape memory alloys, electrostrictive materials) or change optic properties (electrochromic polymers). Polymer gels are one of such materials which can change the shape, volume and even optical properties upon different applied stimuli. Due to their low stiffness property they are capable of having up to 100% of strain in a short time, order of seconds. Their motion resembles the one of biosystems, and they are often seen as possible artificial muscle materials. Despite their delicate nature, appropriate design can make them being used as actuator materials which can form controllable surfaces and mechanical switches. In this study several different groups of polymer gel material were investigated: (a) acrylamide based gels are sensitive to pH and electric field and respond in volume change, (b) polyacrylonitrile (PAN) gel is sensitive to pH and electric field and responds in axial strain and bending, (c) polyvinylalcohol (PVA) gel is sensitive to electric field and responds in axial strain and bending and (d) perfluorinated sulfonic acid membrane, Nafion RTM, is sensitive to electric field and responds in bending. Electro-mechanical and chemo-mechanical behavior of these materials is a function of a variety of phenomena: polymer structure, affinity of polymer to the solvent, charge distribution within material, type of solvent, elasticity of polymer matrix, etc. Modeling of this behavior is a task aimed to identify what is driving mechanism for activation and express it in a quantitative way in terms of deformation of material. In this work behavior of the most promising material as

  15. Long-lived activation products in reactor materials

    SciTech Connect

    Evans, J.C.; Lepel, E.L.; Sanders, R.W.; Wilkerson, C.L.; Silker, W.; Thomas, C.W.; Abel, K.H.; Robertson, D.R.

    1984-08-01

    The purpose of this program was to assess the problems posed to reactor decommissioning by long-lived activation products in reactor construction materials. Samples of stainless steel, vessel steel, concrete, and concrete ingredients were analyzed for up to 52 elements in order to develop a data base of activatable major, minor, and trace elements. Large compositional variations were noted for some elements. Cobalt and niobium concentrations in stainless steel, for example, were found to vary by more than an order of magnitude. A thorough evaluation was made of all possible nuclear reactions that could lead to long lived activation products. It was concluded that all major activation products have been satisfactorily accounted for in decommissioning planning studies completed to date. A detailed series of calculations was carried out using average values of the measured compositions of the appropriate materials to predict the levels of activation products expected in reactor internals, vessel walls, and bioshield materials for PWR and BWR geometries. A comparison is made between calculated activation levels and regulatory guidelines for shallow land disposal according to 10 CFR 61. This analysis shows that PWR and BWR shroud material exceeds the Class C limits and is, therefore, generally unsuitable for near-surface disposal. The PWR core barrel material approaches the Class C limits. Most of the remaining massive components qualify as either Class A or B waste with the bioshield clearly Class A, even at the highest point of activation. Selected samples of activated steel and concrete were subjected to a limited radiochemical analysis program as a verification of the computer model. Reasonably good agreement with the calculations was obtained where comparison was possible. In particular, the presence of /sup 94/Nb in activated stainless steel at or somewhat above expected levels was confirmed.

  16. Active Neutron Interrogation of Non-Radiological Materials with NMIS

    SciTech Connect

    Walker, Mark E; Mihalczo, John T

    2012-02-01

    The Nuclear Materials Identification System (NMIS) at Oak Ridge National Laboratory (ORNL), although primarily designed for analyzing special nuclear material, is capable of identifying nonradiological materials with a wide range of measurement techniques. This report demonstrates four different measurement methods, complementary to fast-neutron imaging, which can be used for material identification: DT transmission, DT scattering, californium transmission, and active time-tagged gamma spectroscopy. Each of the four techniques was used to evaluate how these methods can be used to identify four materials: aluminum, polyethylene, graphite, and G-10 epoxy. While such measurements have been performed individually in the past, in this project, all four measurements were performed on the same set of materials. The results of these measurements agree well with predicted results. In particular, the results of the active gamma spectroscopy measurements demonstrate the technique's applicability in a future version of NMIS which will incorporate passive and active gamma-ray spectroscopy. This system, designated as a fieldable NMIS (FNMIS), is under development by the US Department of Energy Office of Nuclear Verification.

  17. Active thermography in qualitative evaluation of protective materials.

    PubMed

    Gralewicz, Grzegorz; Wiecek, Bogusław

    2009-01-01

    This is a study of the possibilities of a qualitative evaluation of protective materials with active thermography. It presents a simulation of a periodic excitation of a multilayer composite material. Tests were conducted with lock-in thermography on Kevlar composite consisting of 16 layers of Kevlar fabric reinforced with formaldehyde resin with implanted delamination defects. Lock-in thermography is a versatile tool for nondestructive evaluation. It is a fast, remote and nondestructive procedure. Hence, it was used to detect delaminations in the composite structure of materials used in the production of components designed for personal protection. This method directly contributes to an improvement in safety.

  18. On the propagation of Voigt waves in energetically active materials

    NASA Astrophysics Data System (ADS)

    Mackay, Tom G.; Lakhtakia, Akhlesh

    2016-11-01

    If Voigt-wave propagation is possible in a dissipative anisotropic dielectric material characterised by the permittivity dyadic \\mathop{\\varepsilon }\\limits\\raise{2pt=}, then it is also possible in the analogous energetically active material characterised by the permittivity dyadic \\mathop{\\tilde{\\varepsilon }}\\limits\\raise{2pt=}, where \\mathop{\\tilde{\\varepsilon }}\\limits\\raise{2pt=} is the hermitian conjugate of \\mathop{\\varepsilon }\\limits\\raise{2pt=}. This symmetry follows directly from a theoretical analysis of the necessary and sufficient conditions for Voigt-wave propagation in anisotropic materials. As a consequence of this symmetry, a porous dissipative material that exhibits Voigt-wave propagation can be used to construct a material that allows the propagation of Voigt waves with attendant linear gain in amplitude with propagation distance, by means of infiltration with an electrically or optically activated dye, for example. This phenomenon is captured by the Bruggeman formalism for homogenised composite materials based on isotropic dielectric component materials that are randomly distributed as oriented spheroidal particles.

  19. Material Flows in an Active Nematic Liquid Crystal

    NASA Astrophysics Data System (ADS)

    Decamp, Stephen; Redner, Gabriel; Baskaran, Aparna; Hagan, Michael; Dogic, Zvonimir

    Active matter systems are composed of energy consuming constituent components which drive far-from-equilibrium dynamics. As such, active materials exhibit energetic states which would be unfavorable in passive, equilibrium materials. We study one such material; an active nematic liquid crystal which exists in a dynamical steady state where +/-1/2 defects are continuously generated and annihilated at a constant rate. The active nematic is composed of micron-sized microtubule filaments which are highly concentrated into a quasi-2D film that resides on an oil-water interface. Kinesin motor proteins drive inter-filament sliding which results in net extensile motion of the microtubule film. Notably, we find a mesophase in which motile +1/2 defects, acquire system-spanning orientational order. Currently, we are tracking material flows generated by the active stresses in the system to measure length scales at which energy is dissipated, and to measure the relation between internally generated flows and bend in the nematic field.

  20. Mechanical Activation of Construction Binder Materials by Various Mills

    NASA Astrophysics Data System (ADS)

    Fediuk, R. S.

    2016-04-01

    The paper deals with the mechanical grinding down to the nano powder of construction materials. During mechanical activation a composite binder active molecules cement minerals occur in the destruction of the molecular defects in the areas of packaging and breaking metastable phase decompensation intermolecular forces. The process is accompanied by a change in the kinetics of hardening of portland cement. Mechanical processes during grinding mineral materials cause, along with the increase in their surface energy, increase the Gibbs energy of powders and, respectively, their chemical activity, which also contributes to the high adhesion strength when contacting them with binders. Thus, the set of measures for mechanical activation makes better use of the weight of components filled with cement systems and adjust their properties. At relatively low cost is possible to provide a spectacular and, importantly, easily repeatable results in a production environment.

  1. Nonlinear active materials: an illustration of controllable phase matchability.

    PubMed

    Lu, Hongcheng; Gautier, Romain; Donakowski, Martin D; Tran, T Thao; Edwards, Bryce W; Nino, Juan C; Halasyamani, P Shiv; Liu, Zhengtang; Poeppelmeier, Kenneth R

    2013-08-14

    For a crystal to exhibit nonlinear optical (NLO) activity such as second-harmonic generation (SHG), it must belong to a noncentrosymmetric (NCS) space group. Moreover, for these nonlinear optical (NLO) materials to be suitable for practical uses, the synthesized crystals should be phase-matchable (PM). Previous synthetic research into SHG-active crystals has centered on (i) how to create NCS compounds and/or (ii) how to obtain NCS compounds with high SHG efficiencies. With these tactics, one can synthesize a material with a high SHG efficiency, but the material could be unusable if the material was nonphase-matchable (non-PM). To probe the origin of phase matchability of NCS structures, we present two new chemically similar hybrid compounds within one composition space: (I) [Hdpa]2NbOF5·2H2O and (II) HdpaNbOF4 (dpa = 2,2'-dipyridylamine). Both compounds are NCS and chemically similar, but (I) is non-PM while (II) is PM. Our results indicate--consistent with organic crystallography--the arrangement of the organic molecule within hybrid materials dictates whether the material is PM or non-PM.

  2. Carbon Nanotube Materials for Substrate Enhanced Control of Catalytic Activity

    SciTech Connect

    Heben, M.; Dillon, A. C.; Engtrakul, C.; Lee, S.-H.; Kelley, R. D.; Kini, A. M.

    2007-05-01

    Carbon SWNTs are attractive materials for supporting electrocatalysts. The properties of SWNTs are highly tunable and controlled by the nanotube's circumferential periodicity and their surface chemistry. These unique characteristics suggest that architectures constructed from these types of carbon support materials would exhibit interesting and useful properties. Here, we expect that the structure of the carbon nanotube support will play a major role in stabilizing metal electrocatalysts under extreme operating conditions and suppress both catalyst and support degradation. Furthermore, the chemical modification of the carbon nanotube surfaces can be expected to alter the interface between the catalyst and support, thus, enhancing the activity and utilization of the electrocatalysts. We plan to incorporate discrete reaction sites into the carbon nanotube lattice to create intimate electrical contacts with the catalyst particles to increase the metal catalyst activity and utilization. The work involves materials synthesis, design of electrode architectures on the nanoscale, control of the electronic, ionic, and mass fluxes, and use of advanced optical spectroscopy techniques.

  3. Spontaneous Motion in Hierarchically Assembled Active Cellular Materials

    NASA Astrophysics Data System (ADS)

    Chen, Daniel

    2013-03-01

    With exquisite precision and reproducibility, cells orchestrate the cooperative action of thousands of nanometer-sized molecular motors to carry out mechanical tasks at much larger length scales, such as cell motility, division and replication. Besides their biological importance, such inherently far-from-equilibrium processes are an inspiration for the development of soft materials with highly sought after biomimetic properties such as autonomous motility and self-healing. I will describe our exploration of such a class of biologically inspired soft active materials. Starting from extensile bundles comprised of microtubules and kinesin, we hierarchically assemble active analogs of polymeric gels, liquid crystals and emulsions. At high enough concentration, microtubule bundles form an active gel network capable of generating internally driven chaotic flows that enhance transport and fluid mixing. When confined to emulsion droplets, these 3D networks buckle onto the water-oil interface forming a dense thin film of bundles exhibiting cascades of collective buckling, fracture, and self-healing driven by internally generated stresses from the kinesin clusters. When compressed against surfaces, this active nematic cortex exerts traction stresses that propel the locomotion of the droplet. Taken together, these observations exemplify how assemblies of animate microscopic objects exhibit collective biomimetic properties that are fundamentally distinct from those found in materials assembled from inanimate building blocks. These assemblies, in turn, enable the generation of a new class of materials that exhibit macroscale flow phenomena emerging from nanoscale components.

  4. The Empirical Attitude, Material Practice and Design Activities

    ERIC Educational Resources Information Center

    Apedoe, Xornam; Ford, Michael

    2010-01-01

    This article is an argument about something that is both important and severely underemphasized in most current science curricula. The empirical attitude, fundamental to science since Galileo, is a habit of mind that motivates an active search for feedback on our ideas from the material world. Although more simple views of science manifest the…

  5. Characterization of surface active materials derived from farm products

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Surface active materials obtained by chemical modification of plant protein isolates (lupin, barley, oat), corn starches (dextrin, normal, high amylose, and waxy) and soybean oil (soybean oil based polysoaps, SOPS) were investigated for their surface and interfacial properties using axisymmetric dro...

  6. Conducting polymers as active materials in electrochemical capacitors

    NASA Astrophysics Data System (ADS)

    Rudge, Andy; Davey, John; Raistrick, Ian; Gottesfeld, Shimshon; Ferraris, John P.

    Electronically conducting polymer represent an interesting clas of materials for use in electrochemical capacitors thanks to the combination of high capacitive energy density and low materials cost. Three generalized typed of electrochemical capacitors can be constructed using conducting polymers as active material, and in the third of these, which utilized conducting polymers that can be both n- and p-doped, energy densities of up to 39 Wh per kg of active material on both electrodes have been demonstrated. This energy density is obtained using poly-3-(4-fluorophenyl)-thiophene (PEPT) in an electrolyte of 1 M tetramethylammonium trifluoromethanesulfonate (TMATFMS) in acetonitrile. This unique system exhibits reversible n- and p-doping to high charge density in relatively thich films of the active polymer and a cell voltage exceeding 3 V in the fully charged state. Impedance data for both n- and p-doped PFPT suggest that high power densities can be obtained in electrochemical capacitors based on this active conducting polymer.

  7. Getting Started: Materials and Equipment for Active Learning Preschools.

    ERIC Educational Resources Information Center

    Vogel, Nancy

    This book provides information to guide the development of an active learning early childhood program by assisting in the selection of materials and equipment to support children's cognitive, physical and social development. The guide considers the arrangement of classroom areas, and elements of the daily routine. The following classroom interest…

  8. Critical Thinking Activities To Improve Writing Skills: Descriptive Mysteries A-1.

    ERIC Educational Resources Information Center

    Albertus, Karen; And Others

    Emphasizing real-life communication skills, this book offers cooperative activities to help teachers supplement their writing programs with easy-to-use critical thinking activities. The activities in the book are suitable for grades 4 through 8, for gifted younger students, or as a remediation tool for older students. The activities in the book…

  9. Transport of biologically active material in laser cutting.

    PubMed

    Frenz, M; Mathezloic, F; Stoffel, M H; Zweig, A D; Romano, V; Weber, H P

    1988-01-01

    The transport of biologically active material during laser cutting with CO2 and Er lasers is demonstrated. This transport mechanism removes particles from the surface of gelatin, agar, and liver samples into the depth of the laser-formed craters. The transport phenomenon is explained by a contraction and condensation of enclosed hot water vapor. We show by cultivating transported bacteria in agar that biological particles can survive the shock of the transport. Determination of the numbers of active cells evidences a more pronounced activity of the cultivated bacteria after impact with an Er laser than with a CO2 laser.

  10. Loch Linnhe `94: Test operations description and on-site analysis, US activities

    SciTech Connect

    Mantrom, D.D.

    1994-11-01

    A field experiment named Loch Linnhe `94 (LL94) is described. This experiment was conducted in upper Loch Linnhe, Scotland, in September 1994, as an exercise involving UK and US investigators, under the Joint UK/US Radar Ocean Imaging Program. This experiment involved a dual-frequency, dual-polarization hillside real aperture radar operated by the UK, Lawrence Livermore National Laboratory`s (LLNL) current meter array (CMA), in-water hydrodynamic sensors, and meteorological measurements. The primary measurements involved imaging ship-generated and ambient internal waves by the radar and the CMA. This report documents test operations from a US perspective and presents on-site analysis results derived by US investigators. The rationale underlying complementary radar and CMA measurements is described. Descriptions of the test site, platforms, and major US instrument systems are given. A summary of test operations and examples of radar, CMA, water column profile, and meteorological data are provided. A description of the rather extensive analysis of these data performed at the LL94 test site is presented. The products of this analysis are presented and some implications for further analysis and future experiments are discussed. All experimental objectives were either fully or partially met. Powerful on-site analysis capabilities generated many useful products and helped improve subsequent data collection. Significant further data analysis is planned.

  11. Comparison of activation effects in {gamma}-ray detector materials

    SciTech Connect

    Truscott, P.R.; Evans, H.E.; Dyer, C.S.; Peerless, C.L.; Flatman, J.C.; Cosby, M.; Knight, P.; Moss, C.E.

    1996-06-01

    Activation induced by cosmic and trapped radiation in {gamma}-ray detector materials represents a significant source of background for space-based detector systems. Selection of detector materials should therefore include consideration of this background source. Results are presented from measurements of induced radioactivity in different scintillators activated either as a result of irradiation by mono-energetic protons at accelerator facilities, or flight on board the Space Shuttle. Radiation transport computer codes are used to help compare the effects observed from the scintillators, by identifying and quantifying the influence on the background spectra from more than one hundred of the radionuclides produced by spallation. For the space experiment data, the simulation results also permit determination of the contributions to detector activation from the different sources of radiation in the Shuttle cabin.

  12. Activation of a Ca-bentonite as buffer material

    NASA Astrophysics Data System (ADS)

    Huang, Wei-Hsing; Chen, Wen-Chuan

    2016-04-01

    Swelling behavior is an important criterion in achieving the low-permeability sealing function of buffer material. A potential buffer material may be used for radioactive waste repository in Taiwan is a locally available clayey material known as Zhisin clay, which has been identified as a Ca-bentonite. Due to its Ca-based origin, Zhisin was found to exhibit swelling capacity much lower than that of Na-bentonite. To enhance the swelling potential of Zhisin clay, a cation exchange process by addition of Na2CO3 powder was introduced in this paper. The addition of Na2CO3 reagent to Zhisin clay, in a liquid phase, caused the precipitation of CaCO3 and thereby induced a replacement of Ca2+ ions by Na+ ions on the surface of bentonite. Characterization test conducted on Zhisin clay includes chemical analysis, cation exchange capacity, X-ray diffraction, and thermogravimetry (TG). Free-swelling test apparatus was developed according to International Society of Rock Mechanics recommendations. A series of free-swelling tests were conducted on untreated and activated specimens to characterize the effect of activation on the swelling capacity of Zhisin clay. Efforts were made to determine an optimum dosage for the activation, and to evaluate the aging effect. Also, the activated material was evaluated for its stability in various hydrothermal conditions for potential applications as buffer material in a repository. Experimental results show that Na2CO3-activated Zhisin clay is superior in swelling potential to untreated Zhisin clay. Also, there exists an optimum amount of activator in terms of improvements in the swelling capacity. A distinct time-swell relationship was discovered for activated Zhisin clay. The corresponding mechanism refers to exchange of cations and breakdown of quasi-crystal, which results in ion exchange hysteresis of Ca-bentonite. Due to the ion exchange hysteresis, activated bentonite shows a post-rise time-swell relationship different than the sigmoid

  13. Acquisition of teleological descriptions

    NASA Astrophysics Data System (ADS)

    Franke, David W.

    1992-03-01

    Teleology descriptions capture the purpose of an entity, mechanism, or activity with which they are associated. These descriptions can be used in explanation, diagnosis, and design reuse. We describe a technique for acquiring teleological descriptions expressed in the teleology language TeD. Acquisition occurs during design by observing design modifications and design verification. We demonstrate the acquisition technique in an electronic circuit design.

  14. Activation of accelerator construction materials by heavy ions

    NASA Astrophysics Data System (ADS)

    Katrík, P.; Mustafin, E.; Hoffmann, D. H. H.; Pavlovič, M.; Strašík, I.

    2015-12-01

    Activation data for an aluminum target irradiated by 200 MeV/u 238U ion beam are presented in the paper. The target was irradiated in the stacked-foil geometry and analyzed using gamma-ray spectroscopy. The purpose of the experiment was to study the role of primary particles, projectile fragments, and target fragments in the activation process using the depth profiling of residual activity. The study brought information on which particles contribute dominantly to the target activation. The experimental data were compared with the Monte Carlo simulations by the FLUKA 2011.2c.0 code. This study is a part of a research program devoted to activation of accelerator construction materials by high-energy (⩾200 MeV/u) heavy ions at GSI Darmstadt. The experimental data are needed to validate the computer codes used for simulation of interaction of swift heavy ions with matter.

  15. Physical Activity and Its Correlates among Adults in Malaysia: A Cross-Sectional Descriptive Study.

    PubMed

    Cai Lian, Tam; Bonn, Gregory; Si Han, Yeoh; Chin Choo, Yap; Chee Piau, Wong

    2016-01-01

    Obesity and rates of non-communicable diseases linked to physical inactivity have increased dramatically in Malaysia over the past 20 years. Malaysia has also been identified as one of the least physically active countries in the world with over 60% of adults being essentially sedentary. This study examines the relationship of socio-demographic factors to physical activity among 770 adults from 3 Malaysian states. Physical activity levels were significantly related to ethnicity, gender, age, occupation and educational level. Controlling for inter-relationships among these variables; age, gender, Chinese ethnicity and education level were found to have unique effects on total physical activity, as well as moderate and vigorous exercise. As would be expected, younger people were more physically active, engaging more in both moderate and vigorous types of exercise and males were generally more active than females. Contrary to findings from many developed countries, however, more educated Malaysians were less likely to engage in all types of physical activity. Ethnic Chinese participants, and to a lesser degree Indians also consistently reported lower levels of activity. Possible intervention strategies are discussed that specifically target ethnic and cultural norms related to physical activity. Future research programs exploring barriers to participation and perceptions of physical activity, as well as programs to encourage active life styles among youths are also suggested. PMID:27332883

  16. Physical Activity and Its Correlates among Adults in Malaysia: A Cross-Sectional Descriptive Study

    PubMed Central

    Cai Lian, Tam; Bonn, Gregory; Si Han, Yeoh; Chin Choo, Yap; Chee Piau, Wong

    2016-01-01

    Obesity and rates of non-communicable diseases linked to physical inactivity have increased dramatically in Malaysia over the past 20 years. Malaysia has also been identified as one of the least physically active countries in the world with over 60% of adults being essentially sedentary. This study examines the relationship of socio-demographic factors to physical activity among 770 adults from 3 Malaysian states. Physical activity levels were significantly related to ethnicity, gender, age, occupation and educational level. Controlling for inter-relationships among these variables; age, gender, Chinese ethnicity and education level were found to have unique effects on total physical activity, as well as moderate and vigorous exercise. As would be expected, younger people were more physically active, engaging more in both moderate and vigorous types of exercise and males were generally more active than females. Contrary to findings from many developed countries, however, more educated Malaysians were less likely to engage in all types of physical activity. Ethnic Chinese participants, and to a lesser degree Indians also consistently reported lower levels of activity. Possible intervention strategies are discussed that specifically target ethnic and cultural norms related to physical activity. Future research programs exploring barriers to participation and perceptions of physical activity, as well as programs to encourage active life styles among youths are also suggested. PMID:27332883

  17. Online Social Networks That Connect Users to Physical Activity Partners: A Review and Descriptive Analysis

    PubMed Central

    Passarella, Ralph Joseph; Appel, Lawrence J

    2014-01-01

    Background The US Centers for Disease Control and Prevention have identified a lack of encouragement, support, or companionship from family and friends as a major barrier to physical activity. To overcome this barrier, online social networks are now actively leveraging principles of companion social support in novel ways. Objective The aim was to evaluate the functionality, features, and usability of existing online social networks which seek to increase physical activity and fitness among users by connecting them to physical activity partners, not just online, but also face-to-face. Methods In September 2012, we used 3 major databases to identify the website addresses for relevant online social networks. We conducted a Google search using 8 unique keyword combinations: the common keyword “find” coupled with 1 of 4 prefix terms “health,” “fitness,” “workout,” or “physical” coupled with 1 of 2 stem terms “activity partners” or “activity buddies.” We also searched 2 prominent technology start-up news sites, TechCrunch and Y Combinator, using 2 unique keyword combinations: the common keyword “find” coupled with 1 of 2 stem terms “activity partners” and “activity buddies.” Sites were defined as online social health activity networks if they had the ability to (1) actively find physical activity partners or activities for the user, (2) offer dynamic, real-time tracking or sharing of social activities, and (3) provide virtual profiles to users. We excluded from our analysis sites that were not Web-based, publicly available, in English, or free. Results Of the 360 initial search results, we identified 13 websites that met our complete criteria of an online social health activity network. Features such as physical activity creation (13/13, 100%) and private messaging (12/13, 92%) appeared almost universally among these websites. However, integration with Web 2.0 technologies such as Facebook and Twitter (9/13, 69%) and the option of

  18. Research in active composite materials and structures: an overview

    NASA Astrophysics Data System (ADS)

    Garg, Devendra P.; Anderson, Gary L.

    2000-06-01

    During the past several years, the Materials Science Division and the Mechanical and Environmental Sciences Division of the Army Research Office have been supporting projects focusing on basic resaserch in the area of smart materials and structures. The major emphasis of the ARO Structures and Dynamics Program has been on the theoretical, computational, and experimental analysis of smart structures and structural dynamics, damping, active control, and health monitoring as applied to rotor craft, electromagnetic antenna structures, missiles, land vehicles, and weapon systems. The research projects supported by the program have been primarily directed towards improving the ability to predict, control, and optimize the dynamic response of complex, multi-body deformable structures. The projects in the field of smart materials and structures have included multi-disciplinary research conducted by teams of several faculty members as well as research performed by individual investigators.

  19. Module Design, Materials, and Packaging Research Team: Activities and Capabilities

    SciTech Connect

    McMahon, T. J.; del Cueto, J.; Glick, S.; Jorgensen, G.; Kempe, M.; Kennedy, C.; Pern, J.; Terwilliger, K

    2005-01-01

    Our team activities are directed at improving PV module reliability by incorporating new, more effective, and less expensive packaging materials and techniques. New and existing materials or designs are evaluated before and during accelerated environmental exposure for the following properties: (1) Adhesion and cohesion: peel strength and lap shear. (2) Electrical conductivity: surface, bulk, interface and transients. (3) Water vapor transmission: solubility and diffusivity. (4) Accelerated weathering: ultraviolet, temperature, and damp heat tests. (5) Module and cell failure diagnostics: infrared imaging, individual cell shunt characterization, coring. (6) Fabrication improvements: SiOxNy barrier coatings and enhanced wet adhesion. (7) Numerical modeling: Moisture ingress/egress, module and cell performance, and cell-to-frame leakage current. (8) Rheological properties of polymer encapsulant and sheeting materials. Specific examples will be described.

  20. Electro-active material (EAM) based bend sensors

    NASA Astrophysics Data System (ADS)

    LaComb, Ronald; LaComb, Julie

    2010-04-01

    The capability to accurately estimate strain and orientation of cables in an undersea environment is important for a multitude of applications. One way to estimate the positional location of a submersed cable is to utilize a network of distributed bend sensors providing inputs to a curve fitting algorithm. In this work commercially available bend sensors are characterized for small deflections. In addition proto-type devices are presented which can potentially improve device sensitivity. Commercially available bend sensors are based upon electro-active materials and variable resistance materials. Electro-active materials (EAM) are known for their actuator functionality but certain EAMs are capable of sensing as well. New advances in materials such as Ionic Polymer Metal Composites (IPMC) are proving suitable for quasi-static sensor applications. These sensors are low power, conformal and produce directionally dependent output voltages which are linearly proportional to deflection, with voltage polarity representative of the deflection direction. IPMCs are capable of being morphed for increased sensitivity. Variable resistivity sensors are based on smart epoxy polymer and carbon loaded inks. These sensors are inexpensive and conformal and unlike EAMs provide static measurements.

  1. Positive Active Material For Alkaline Electrolyte Storage Battert Nickel Electrodes

    DOEpatents

    Bernard, Patrick; Baudry, Michelle

    2000-12-05

    A method of manufacturing a positive active material for nickel electrodes of alkaline storage batteries which consists of particles of hydroxide containing mainly nickel and covered with a layer of a hydroxide phase based on nickel and yttrium is disclosed. The proportion of the hydroxide phase is in the range 0.15% to 3% by weight of yttrium expressed as yttrium hydroxide relative to the total weight of particles.

  2. Indoor Chemistry: Materials, Ventilation Systems, and Occupant Activities

    SciTech Connect

    Morrison, G.C.; Corsi, R.L.; Destaillats, H.; Nazaroff, W.W.; Wells, J.R.

    2006-05-01

    Chemical processes taking place in indoor environments can significantly alter the nature and concentrations of pollutants. Exposure to secondary contaminants generated in these reactions needs to be evaluated in association with many aspects of buildings to minimize their impact on occupant health and well-being. Focusing on indoor ozone chemistry, we describe alternatives for improving indoor air quality by controlling chemical changes related to building materials, ventilation systems, and occupant activities.

  3. Final Report: Imaging of Buried Nanoscale Optically Active Materials

    SciTech Connect

    Appelbaum, Ian

    2011-07-05

    This is a final report covering work done at University of Maryland to develop a Ballistic Electron Emission Luminescence (BEEL) microscope. This technique was intended to examine the carrier transport and photon emission in deeply buried optically-active layers and thereby provide a means for materials science to unmask the detailed consequences of experimentally controllable growth parameters, such as quantum dot size, statistics and orientation, and defect density and charge recombination pathways.

  4. Easing the Transition to School: Administrators' Descriptions of Transition to School Activities

    ERIC Educational Resources Information Center

    Noel, Andrea

    2011-01-01

    This paper details the early childhood transition activities of three schools in southern Queensland, Australia, as reported by school administrators. The transition programs were analysed using the categories of the Transition to School Matrix of the New South Wales (NSW) Department of Education. Activities fell into the first four categories…

  5. Using DFT Methods to Study Activators in Optical Materials

    SciTech Connect

    Du, Mao-Hua

    2015-08-17

    Density functional theory (DFT) calculations of various activators (ranging from transition metal ions, rare-earth ions, ns2 ions, to self-trapped and dopant-bound excitons) in phosphors and scintillators are reviewed. As a single-particle ground-state theory, DFT calculations cannot reproduce the experimentally observed optical spectra, which involve transitions between multi-electronic states. However, DFT calculations can generally provide sufficiently accurate structural relaxation and distinguish different hybridization strengths between an activator and its ligands in different host compounds. This is important because the activator-ligand interaction often governs the trends in luminescence properties in phosphors and scintillators, and can be used to search for new materials. DFT calculations of the electronic structure of the host compound and the positions of the activator levels relative to the host band edges in scintillators are also important for finding optimal host-activator combinations for high light yields and fast scintillation response. Mn4+ activated red phosphors, scintillators activated by Ce3+, Eu2+, Tl+, and excitons are shown as examples of using DFT calculations in phosphor and scintillator research.

  6. Using DFT Methods to Study Activators in Optical Materials

    DOE PAGES

    Du, Mao-Hua

    2015-08-17

    Density functional theory (DFT) calculations of various activators (ranging from transition metal ions, rare-earth ions, ns2 ions, to self-trapped and dopant-bound excitons) in phosphors and scintillators are reviewed. As a single-particle ground-state theory, DFT calculations cannot reproduce the experimentally observed optical spectra, which involve transitions between multi-electronic states. However, DFT calculations can generally provide sufficiently accurate structural relaxation and distinguish different hybridization strengths between an activator and its ligands in different host compounds. This is important because the activator-ligand interaction often governs the trends in luminescence properties in phosphors and scintillators, and can be used to search for new materials.more » DFT calculations of the electronic structure of the host compound and the positions of the activator levels relative to the host band edges in scintillators are also important for finding optimal host-activator combinations for high light yields and fast scintillation response. Mn4+ activated red phosphors, scintillators activated by Ce3+, Eu2+, Tl+, and excitons are shown as examples of using DFT calculations in phosphor and scintillator research.« less

  7. Active-Site-Accessible, Porphyrinic Metal;#8722;Organic Framework Materials

    SciTech Connect

    Farha, Omar K.; Shultz, Abraham M.; Sarjeant, Amy A.; Nguyen, SonBinh T.; Hupp, Joseph T.

    2012-02-06

    On account of their structural similarity to cofactors found in many metallo-enzymes, metalloporphyrins are obvious potential building blocks for catalytically active, metal-organic framework (MOF) materials. While numerous porphyrin-based MOFs have already been described, versions featuring highly accessible active sites and permanent microporosity are remarkably scarce. Indeed, of the more than 70 previously reported porphyrinic MOFs, only one has been shown to be both permanently microporous and contain internally accessible active sites for chemical catalysis. Attempts to generalize the design approach used in this single successful case have failed. Reported here, however, is the synthesis of an extended family of MOFs that directly incorporate a variety of metalloporphyrins (specifically Al{sup 3+}, Zn{sup 2+}, Pd{sup 2+}, Mn{sup 3+}, and Fe{sup 3+} complexes). These robust porphyrinic materials (RPMs) feature large channels and readily accessible active sites. As an illustrative example, one of the manganese-containing RPMs is shown to be catalytically competent for the oxidation of alkenes and alkanes.

  8. Sleep and activity rhythms in mice: a description of circadian patterns and unexpected disruptions in sleep.

    PubMed

    Mitler, M M; Lund, R; Sokolove, P G; Pittendrigh, C S; Dement, W C

    1977-08-01

    Studies on daily and circadian rhythms in wheel running and electrographically defined wakefulness, NREM sleep, and REM sleep in M. musculus were done to gather data on the temporal distribution of activity and sleep. Generally, peaks in NREM and sleep tended to coincide and to alternate with the coincident peaks of wakefulness and wheel running. However, during the active phase of the circadian wheel running cycle some NREM and REM sleep did occur; conversely, during its rest phase, wakefulness was often present. The most striking finding was that in mice with clearly entrained or free-running activity onsets, the circadian peak-through patterns in wakefulness, NREM, and REM sleep were not always distinct--they could be damped and/or polyphasic. Several explanations of these phenomena are considered. PMID:195675

  9. Antimicrobial activity of filling materials used in primary teeth pulpotomy.

    PubMed

    Pimenta, Hévelin Couto; Borges, Álvaro Henrique; Bandeca, Matheus Coelho; Neves, Ana Thereza Sabóia; Fontes, Rodrigo Gusmão; da Silva, Priscila Vieira; Aranha, Andreza Maria Fábio

    2015-04-01

    The aim of this study was to investigate the antibacterial activity of pulp capping materials used in primary teeth (formocresol [FC], zinc oxide and eugenol cement [ZOE], ZOE mixed with FC [ZOEFC], mineral trioxide aggregate [MTA] and calcium hydroxide [CH]) against cariogenic bacteria. The agar plate diffusion test was used for the cultures, including saline solution as a negative control. A base layer of 15 mL of brain heart infusion agar was inoculated with 300 mL of each inoculum. Twelve wells were made and completely filled with one of the testing materials for each bacteria strain. The plates were incubated at 37°C for 48 h. Zones of microbial inhibition and material diffusion were measured and photographed. The results obtained were analyzed by Kruskal-Wallis and Mann-Whitney non-parametric tests. Respectively, the medium zones of bacteria inhibition of FC, ZOE, ZOEFC, MTA and CH against Streptococcus mutans growth were 28.5, 15.2, 20.8, 9.3 and 11.6; against Lactobacillus acidophilus growth were 28.7, 14.8, 15.3, 15.2 and 20.0, and against Actinomyces viscosus growth were 13.6, 13.5, 14.7, 10.0 and 13.6. We might confirmed the high antibacterial activity of FC solution, especially against S. mutans and L. acidophilus, as wells as, the low inhibitory effect of MTA cement on the cariogenic bacteria studied.

  10. Antimicrobial Activity of Filling Materials Used in Primary Teeth Pulpotomy

    PubMed Central

    Pimenta, Hévelin Couto; Borges, Álvaro Henrique; Bandeca, Matheus Coelho; Neves, Ana Thereza Sabóia; Fontes, Rodrigo Gusmão; da Silva, Priscila Vieira; Aranha, Andreza Maria Fábio

    2015-01-01

    The aim of this study was to investigate the antibacterial activity of pulp capping materials used in primary teeth (formocresol [FC], zinc oxide and eugenol cement [ZOE], ZOE mixed with FC [ZOEFC], mineral trioxide aggregate [MTA] and calcium hydroxide [CH]) against cariogenic bacteria. The agar plate diffusion test was used for the cultures, including saline solution as a negative control. A base layer of 15 mL of brain heart infusion agar was inoculated with 300 mL of each inoculum. Twelve wells were made and completely filled with one of the testing materials for each bacteria strain. The plates were incubated at 37°C for 48 h. Zones of microbial inhibition and material diffusion were measured and photographed. The results obtained were analyzed by Kruskal–Wallis and Mann–Whitney non-parametric tests. Respectively, the medium zones of bacteria inhibition of FC, ZOE, ZOEFC, MTA and CH against Streptococcus mutans growth were 28.5, 15.2, 20.8, 9.3 and 11.6; against Lactobacillus acidophilus growth were 28.7, 14.8, 15.3, 15.2 and 20.0, and against Actinomyces viscosus growth were 13.6, 13.5, 14.7, 10.0 and 13.6. We might confirmed the high antibacterial activity of FC solution, especially against S. mutans and L. acidophilus, as wells as, the low inhibitory effect of MTA cement on the cariogenic bacteria studied. PMID:25954072

  11. Vibration attenuation of aircraft structures utilizing active materials

    NASA Astrophysics Data System (ADS)

    Agnes, Gregory S.; Whitehouse, Stephen R.; Mackaman, John R.

    1993-09-01

    The need for active vibration control for airborne laser systems was demonstrated during the late 1970s by the Airborne Laser Laboratory. Other possible applications include sonic fatigue alleviation, reduction of buffet induced fatigue, vibration control for embedded antennae, and active aeroelastic control. The purpose of this paper is to present an overview of active vibration control technology and its application to aircraft. Classification of classic aircraft vibration problems and currently available solutions are used to provide a framework for the study. Current solutions are classified as being either passive or active and by the methodology (modal modification or addition) used to reduce vibration. Possible applications for this technology in aircraft vibration control are presented within this framework to demonstrate the increased versatility active materials technologies provide the designer. An in- depth study of an active pylon to reduce wing/store vibration is presented as an example. Finally, perceived gaps in the existing technology base are identified and both on-going and future research plans in these areas are discussed.

  12. Adult Competency Education Kit. Basic Skills in Speaking, Math, and Reading for Employment. Part R. ACE Competency Based Job Descriptions: #95--Bus Driver; #98--General Loader; #99--Forklift Operator; #100--Material Handler.

    ERIC Educational Resources Information Center

    San Mateo County Office of Education, Redwood City, CA. Career Preparation Centers.

    This fifteenth of fifteen sets of Adult Competency Education (ACE) Competency Based Job Descriptions in the ACE kit contains job descriptions for Bus Driver, General Loader, Forklift Operator, and Material Handler. Each begins with a fact sheet that includes this information: occupational title, D.O.T. code, ACE number, career ladder, D.O.T.…

  13. Design of Responsive and Active (Soft) Materials Using Liquid Crystals.

    PubMed

    Bukusoglu, Emre; Bedolla Pantoja, Marco; Mushenheim, Peter C; Wang, Xiaoguang; Abbott, Nicholas L

    2016-06-01

    Liquid crystals (LCs) are widely known for their use in liquid crystal displays (LCDs). Indeed, LCDs represent one of the most successful technologies developed to date using a responsive soft material: An electric field is used to induce a change in ordering of the LC and thus a change in optical appearance. Over the past decade, however, research has revealed the fundamental underpinnings of potentially far broader and more pervasive uses of LCs for the design of responsive soft material systems. These systems involve a delicate interplay of the effects of surface-induced ordering, elastic strain of LCs, and formation of topological defects and are characterized by a chemical complexity and diversity of nano- and micrometer-scale geometry that goes well beyond that previously investigated. As a reflection of this evolution, the community investigating LC-based materials now relies heavily on concepts from colloid and interface science. In this context, this review describes recent advances in colloidal and interfacial phenomena involving LCs that are enabling the design of new classes of soft matter that respond to stimuli as broad as light, airborne pollutants, bacterial toxins in water, mechanical interactions with living cells, molecular chirality, and more. Ongoing efforts hint also that the collective properties of LCs (e.g., LC-dispersed colloids) will, over the coming decade, yield exciting new classes of driven or active soft material systems in which organization (and useful properties) emerges during the dissipation of energy. PMID:26979412

  14. Design of Responsive and Active (Soft) Materials Using Liquid Crystals.

    PubMed

    Bukusoglu, Emre; Bedolla Pantoja, Marco; Mushenheim, Peter C; Wang, Xiaoguang; Abbott, Nicholas L

    2016-06-01

    Liquid crystals (LCs) are widely known for their use in liquid crystal displays (LCDs). Indeed, LCDs represent one of the most successful technologies developed to date using a responsive soft material: An electric field is used to induce a change in ordering of the LC and thus a change in optical appearance. Over the past decade, however, research has revealed the fundamental underpinnings of potentially far broader and more pervasive uses of LCs for the design of responsive soft material systems. These systems involve a delicate interplay of the effects of surface-induced ordering, elastic strain of LCs, and formation of topological defects and are characterized by a chemical complexity and diversity of nano- and micrometer-scale geometry that goes well beyond that previously investigated. As a reflection of this evolution, the community investigating LC-based materials now relies heavily on concepts from colloid and interface science. In this context, this review describes recent advances in colloidal and interfacial phenomena involving LCs that are enabling the design of new classes of soft matter that respond to stimuli as broad as light, airborne pollutants, bacterial toxins in water, mechanical interactions with living cells, molecular chirality, and more. Ongoing efforts hint also that the collective properties of LCs (e.g., LC-dispersed colloids) will, over the coming decade, yield exciting new classes of driven or active soft material systems in which organization (and useful properties) emerges during the dissipation of energy.

  15. Descriptive Analysis of Title VII-Funded State Education Agency Activities. Volume I.

    ERIC Educational Resources Information Center

    Nava, Hector; And Others

    Results of a national study of the use of funds provided by the 1974 amendments to Title VII of the Elementary and Secondary Education Act by the state education agencies (SEAs) are presented. The study was undertaken to (1) describe and analyze SEA policies and activities regarding bilingual education, (2) describe and analyze the SEA-level…

  16. Descriptive Analysis of Title VII-Funded State Education Agency Activities. Executive Summary.

    ERIC Educational Resources Information Center

    SRA Technologies, Inc., Arlington, VA.

    An executive summary of the results of a national study of the state education agencies' (SEAs) use of funds provided by the 1974 amendments to Title VII of the Elementary and Secondary Education Act are presented. The study was undertaken to (1) describe and analyze SEA policies and activities regarding bilingual education, (2) describe and…

  17. Descriptive Analysis of Title VII-Funded State Education Agency Activities. Volume II: Nine Case Studies.

    ERIC Educational Resources Information Center

    Nava, Hector; And Others

    Results of a national study of the use of funds provided by the 1974 amendments to Title VII of the Elementary and Secondary Education Act by the state education agencies (SEAs) are presented. The study was undertaken to (1) describe and analyze SEA policies and activities regarding bilingual education, (2) describe and analyze the SEA-level…

  18. Description of Functional Disability among Younger Stroke Patients: Exploration of Activity and Participation and Environmental Factors

    ERIC Educational Resources Information Center

    Snogren, Maria; Sunnerhagen, Katharina Stibrant

    2009-01-01

    The aim of the study is to describe disability among younger stroke patients by analyzing activity and participation and the environmental aspect as well as to compare assessed and self-perceived problems after stroke. International Classification of Functioning and Health (ICF) is a tool that provides a scientific basis for understanding and…

  19. An Initial Description and Pilot of Group Behavioral Activation Therapy for Anxious and Depressed Youth

    ERIC Educational Resources Information Center

    Chu, Brian C.; Colognori, Daniela; Weissman, Adam S.; Bannon, Katie

    2009-01-01

    Transdiagnostic approaches for treating multiple problems within a single protocol are novel but gaining support. This report describes initial efforts to adapt reconceptualized behavioral activation (e.g., Jacobson, Martell, & Dimidjian, 2001) to a group format suitable for young adolescents, plus add a powerful exposure component to accommodate…

  20. Active Neutron Interrogation to Detect Shielded Fissionable Material

    SciTech Connect

    D. L. Chichester; E. H. Seabury

    2009-05-01

    Portable electronic neutron generators (ENGs) may be used to interrogate suspicious items to detect, characterize, and quantify the presence fissionable material based upon the measurement of prompt and/or delayed emissions of neutrons and/or photons resulting from fission. The small size (<0.2 m3), light weight (<12 kg), and low power consumption (<50 W) of modern ENGs makes them ideally suited for use in field situations, incorporated into systems carried by 2-3 individuals under rugged conditions. At Idaho National Laboratory we are investigating techniques and portable equipment for performing active neutron interrogation of moderate sized objects less than ~2-4 m3 to detect shielded fissionable material. Our research in this area relies upon the use of pulsed deuterium-tritium ENGs and the measurement of die-away prompt fission neutrons and other neutron signatures in-between neutron pulses from the ENG and after the ENG is turned off.

  1. Description and hydrogeologic implications of cored sedimentary material from the 1975 drilling program at the radioactive waste management complex, Idaho

    USGS Publications Warehouse

    Rightmire, C.T.

    1984-01-01

    Samples of sedimentary material from interbeds between basalt flows and from fractures in the flows, taken from two drill cores at the Radioactive Waste Management Complex at the Idaho National Engineering Laboratory were analyzed for (1) particle-size dribution, (2) bulk mineralogy, (3) clay mineralogy, (4) cation-exchange capacity, and (5) carbonate content. Thin sections of selected sediment material were made for petrographic examination. Preliminary interpretations indicate that (1) it may be possible to distinguish the various sediment interbeds on the basis of their mineralogy, (2) the presence of carbonate horizons in sedimentary interbeds may be utilized to approximate the time of exposure and the climate while the surface was exposed (which affected the hydrogeologic character of the sediment), and the type and orientation of fracture-filling material may be utilized to determine the mechanism by which fractures were filled. (USGS)

  2. Enhancing activated-peroxide formulations for porous materials :

    SciTech Connect

    Krauter, Paula; Tucker, Mark D.; Tezak, Matthew S.; Boucher, Raymond

    2012-12-01

    During an urban wide-area incident involving the release of a biological warfare agent, the recovery/restoration effort will require extensive resources and will tax the current capabilities of the government and private contractors. In fact, resources may be so limited that decontamination by facility owners/occupants may become necessary and a simple decontamination process and material should be available for this use. One potential process for use by facility owners/occupants would be a liquid sporicidal decontaminant, such as pHamended bleach or activated-peroxide, and simple application devices. While pH-amended bleach is currently the recommended low-tech decontamination solution, a less corrosive and toxic decontaminant is desirable. The objective of this project is to provide an operational assessment of an alternative to chlorine bleach for low-tech decontamination applications activated hydrogen peroxide. This report provides the methods and results for activatedperoxide evaluation experiments. The results suggest that the efficacy of an activated-peroxide decontaminant is similar to pH-amended bleach on many common materials.

  3. Active multimodal psychotherapy in children and adolescents with suicidality: description, evaluation and clinical profile.

    PubMed

    Högberg, Goran; Hällström, Tore

    2008-07-01

    The aim of this study was to describe and evaluate the clinical pattern of 14 youths with presenting suicidality, to describe an integrative treatment approach, and to estimate therapy effectiveness. Fourteen patients aged 10 to 18 years from a child and adolescent outpatient clinic in Stockholm were followed in a case series. The patients were treated with active multimodal psychotherapy. This consisted of mood charting by mood-maps, psycho-education, wellbeing practice and trauma resolution. Active techniques were psychodrama and body-mind focused techniques including eye movement desensitization and reprocessing. The patients were assessed before treatment, immediately after treatment and at 22 months post treatment with the Global Assessment of Functioning Scale. The clinical pattern of the group was observed. After treatment there was a significant change towards normality in the Global Assessment of Functioning scale both immediately post-treatment and at 22 months. A clinical pattern, post trauma suicidal reaction, was observed with a combination of suicidality, insomnia, bodily symptoms and disturbed mood regulation. We conclude that in the post trauma reaction suicidality might be a presenting symptom in young people. Despite the shortcomings of a case series the results of this study suggest that a mood-map-based multimodal treatment approach with active techniques might be of value in the treatment of children and youth with suicidality.

  4. Neonatal diabetes mellitus: description of two Puerto Rican children with KCNJ11 activating gene mutation.

    PubMed

    Nieves-Rivera, Francisco; González-Pijem, Lilliam

    2011-06-01

    Neonatal diabetes mellitus (NDM) is a rare disorder. A one-month-old boy presented with vomiting, hyperglycemia (968 mg/dl [53.8 mmol/L]), severe acetonemia, and metabolic acidosis (pH 6.95, HCO3-4.2 mmol/L). A second child (three months of age) presented with upper respiratory tract symptoms and a plasma glucose level of 835 mg/dl, without acetonemia or acidosis. Both were hospitalized and managed with intravenous fluids and then discharged on insulin. Genetic testing identified the presence of the de nova V59M and E322K activating mutations in the KCNJ11 gene encoding the sulphonylurea/potassium channel (Kir6.2 subunit) of the insulin beta cell. Both patients were switched to glibenclamide and remain off insulin. To our knowledge, these are the first children in Puerto Rico identified with NDM secondary to a KCNJ11 activating mutation. We conclude that NDM secondary to KCNJ11/Kir6.2 activating mutations, although unusual, should be considered in similar cases since patients with these mutations could come off insulin.

  5. Active Printed Materials for Complex Self-Evolving Deformations

    NASA Astrophysics Data System (ADS)

    Raviv, Dan; Zhao, Wei; McKnelly, Carrie; Papadopoulou, Athina; Kadambi, Achuta; Shi, Boxin; Hirsch, Shai; Dikovsky, Daniel; Zyracki, Michael; Olguin, Carlos; Raskar, Ramesh; Tibbits, Skylar

    2014-12-01

    We propose a new design of complex self-evolving structures that vary over time due to environmental interaction. In conventional 3D printing systems, materials are meant to be stable rather than active and fabricated models are designed and printed as static objects. Here, we introduce a novel approach for simulating and fabricating self-evolving structures that transform into a predetermined shape, changing property and function after fabrication. The new locally coordinated bending primitives combine into a single system, allowing for a global deformation which can stretch, fold and bend given environmental stimulus.

  6. Active printed materials for complex self-evolving deformations.

    PubMed

    Raviv, Dan; Zhao, Wei; McKnelly, Carrie; Papadopoulou, Athina; Kadambi, Achuta; Shi, Boxin; Hirsch, Shai; Dikovsky, Daniel; Zyracki, Michael; Olguin, Carlos; Raskar, Ramesh; Tibbits, Skylar

    2014-12-18

    We propose a new design of complex self-evolving structures that vary over time due to environmental interaction. In conventional 3D printing systems, materials are meant to be stable rather than active and fabricated models are designed and printed as static objects. Here, we introduce a novel approach for simulating and fabricating self-evolving structures that transform into a predetermined shape, changing property and function after fabrication. The new locally coordinated bending primitives combine into a single system, allowing for a global deformation which can stretch, fold and bend given environmental stimulus.

  7. A Descriptive Analysis of the Chemical Bond Approach, the Chemical Education Material Study, and a Representative Traditional Chemistry Course.

    ERIC Educational Resources Information Center

    Crilly, Alice Roth

    This study compared three one-year courses in high school chemistry. One of these, entitled Modern Chemistry, represents the "traditional" precollegiate chemistry course. The others are the Chemical Bond Approach (CBA) and the Chemical Education Material Study (CHEM Study). These are the two major revisions in high school chemistry which emerged…

  8. Noninvasive localization of electromagnetic epileptic activity. I. Method descriptions and simulations.

    PubMed

    Grave de Peralta Menendez, R; Gonzalez Andino, S; Lantz, G; Michel, C M; Landis, T

    2001-01-01

    This paper considers the solution of the bioelectromagnetic inverse problem with particular emphasis on focal compact sources that are likely to arise in epileptic data. Two linear inverse methods are proposed and evaluated in simulations. The first method belongs to the class of distributed inverse solutions, capable of dealing with multiple simultaneously active sources. This solution is based on a Local Auto Regressive Average (LAURA) model. Since no assumption is made about the number of activated sources, this approach can be applied to data with multiple sources. The second method, EPIFOCUS, assumes that there is only a single focal source. However, in contrast to the single dipole model, it allows the source to have a spatial extent beyond a single point and avoids the non-linear optimization process required by dipole fitting. The performance of both methods is evaluated with synthetic data in noisy and noise free conditions. The simulation results demonstrate that LAURA and EPIFOCUS increase the number of sources retrieved with zero dipole localization error and produce lower maximum error and lower average error compared to Minimum Norm, Weighted Minimum Norm and Minimum Laplacian (LORETA). The results show that EPIFOCUS is a robust and powerful tool to localize focal sources. Alternatives to localize data generated by multiple sources are discussed. A companion paper (Lantz et al. 2001, this issue) illustrates the application of LAURA and EPIFOCUS to the analysis of interictal data in epileptic patients.

  9. Active millimeter wave detection of concealed layers of dielectric material

    NASA Astrophysics Data System (ADS)

    Bowring, N. J.; Baker, J. G.; Rezgui, N. D.; Southgate, M.; Alder, J. F.

    2007-04-01

    Extensive work has been published on millimetre wave active and passive detection and imaging of metallic objects concealed under clothing. We propose and demonstrate a technique for revealing the depth as well as the outline of partially transparent objects, which is especially suited to imaging layer materials such as explosives and drugs. The technique uses a focussed and scanned FMCW source, swept through many GHz to reveal this structure. The principle involved is that a parallel sided dielectric slab produces reflections at both its upper and lower surfaces, acting as a Fabry-Perot interferometer. This produces a pattern of alternating reflected peaks and troughs in frequency space. Fourier or Burg transforming this pattern into z-space generates a peak at the thickness of the irradiated sample. It could be argued that though such a technique may work for single uniform slabs of dielectric material, it will give results of little or no significance when the sample both scatters the incident radiation and gives erratic reflectivities due to its non-uniform thickness and permittivity . We show results for a variety of materials such as explosive simulants, powder and drugs, both alone and concealed under clothing or in a rucksack, which display strongly directional reflectivities at millimeter wavelengths, and whose location is well displayed by a varying thickness parameter as the millimetre beam is scanned across the target. With this system we find that samples can easily be detected at standoff distances of at least 4.6m.

  10. [Immunohistochemical description of proliferative activity and apoptosis of lung squamous cell carcinoma (literature review)].

    PubMed

    Филенко, Борис Н; Ройко, Наталия В; Степанчук, Алла П; Проскурня, Сергей А

    2016-01-01

    The analysis of the publications are describe immunohistochemical study of proliferative activity and apoptosis of lung squamous cell carcinoma. Established that the imbalance between proliferation and cell death is a key process in the development of tumors. However, the value of tumor markers in histogenesis and morfogenesis of tumors and forecast their occurrence is not studied enough. Despite the significant amount of scientific literature devoted to this issue, has not yet established a clear link expression of immunohistochemical markers of proliferation and apoptosis with the degree of differentiation of squamous cell lung cancer. Analysis of the literature shows that the morphology of this histogenetics type lung cancer at the cellular, subcellular structural and functional levels are controversial and require detailed investigation. PMID:27487551

  11. [Immunohistochemical description of proliferative activity and apoptosis of lung squamous cell carcinoma (literature review)].

    PubMed

    Филенко, Борис Н; Ройко, Наталия В; Степанчук, Алла П; Проскурня, Сергей А

    2016-01-01

    The analysis of the publications are describe immunohistochemical study of proliferative activity and apoptosis of lung squamous cell carcinoma. Established that the imbalance between proliferation and cell death is a key process in the development of tumors. However, the value of tumor markers in histogenesis and morfogenesis of tumors and forecast their occurrence is not studied enough. Despite the significant amount of scientific literature devoted to this issue, has not yet established a clear link expression of immunohistochemical markers of proliferation and apoptosis with the degree of differentiation of squamous cell lung cancer. Analysis of the literature shows that the morphology of this histogenetics type lung cancer at the cellular, subcellular structural and functional levels are controversial and require detailed investigation.

  12. Acceptance and Commitment Therapy and Behavioral Activation for the Treatment of Depression: Description and Comparison

    PubMed Central

    Kanter, Jonathan W; Baruch, David E; Gaynor, Scott T

    2006-01-01

    The field of clinical behavior analysis is growing rapidly and has the potential to affect and transform mainstream cognitive behavior therapy. To have such an impact, the field must provide a formulation of and intervention strategies for clinical depression, the “common cold” of outpatient populations. Two treatments for depression have emerged: acceptance and commitment therapy (ACT) and behavioral activation (BA). At times ACT and BA may suggest largely redundant intervention strategies. However, at other times the two treatments differ dramatically and may present opposing conceptualizations. This paper will compare and contrast these two important treatment approaches. Then, the relevant data will be presented and discussed. We will end with some thoughts on how and when ACT or BA should be employed clinically in the treatment of depression. PMID:22478462

  13. Stochastic description of the ligand-receptor interaction of biologically active substances at extremely low doses.

    PubMed

    Gurevich, Konstantin G; Agutter, Paul S; Wheatley, Denys N

    2003-04-01

    Signalling molecules can be effective at extraordinarily low concentrations (down to attomolar levels). To handle such cases, probabilistic methods have been used to describe the formal kinetics of action of biologically active substances in these low doses, although it has been necessary to review what is meant by such a term. The mean numbers of transformed/degraded molecules and their dispersions were calculated for the possible range of ligand-receptor binding schemes. We used both analytical equations and numerical simulations to calculate the coefficients of variation (ratio of standard deviation to mean) and demonstrated that the distribution of the coefficient is highly dependent on the reaction scheme. It may, therefore, be used as an additional factor for discriminating between cooperative and noncooperative models of ligand-receptor interaction over extreme ranges of ligand dilution. The relevance to signalling behaviour is discussed.

  14. Simulation of cemented granular materials. II. Micromechanical description and strength mobilization at the onset of macroscopic yielding.

    PubMed

    Estrada, Nicolas; Lizcano, Arcesio; Taboada, Alfredo

    2010-07-01

    This is the second of two papers investigating the mechanical response of cemented granular materials by means of contact dynamics simulations. In this paper, a two-dimensional polydisperse sample with high void ratio is sheared in a load-controlled simple shear numerical device until the stress state of the sample reaches the yield stress. We first study the stress transmission properties of the granular material in terms of the fabric of different subsets of contacts characterized by the magnitude of their normal forces. This analysis highlights the existence of a peculiar force carrying structure in the cemented material, which is reminiscent of the bimodal stress transmission reported for cohesionless granular media. Then, the evolution of contact forces and torques is investigated trying to identify the micromechanical conditions that trigger macroscopic yielding. It is shown that global failure can be associated to the apparition of a group of particles whose contacts fulfill at least one of the local rupture conditions. In particular, these particles form a large region that percolates through the sample at the moment of failure, evidencing the relationship between macroscopic yielding and the emergence of large-scale correlations in the system.

  15. Simulation of cemented granular materials. II. Micromechanical description and strength mobilization at the onset of macroscopic yielding.

    PubMed

    Estrada, Nicolas; Lizcano, Arcesio; Taboada, Alfredo

    2010-07-01

    This is the second of two papers investigating the mechanical response of cemented granular materials by means of contact dynamics simulations. In this paper, a two-dimensional polydisperse sample with high void ratio is sheared in a load-controlled simple shear numerical device until the stress state of the sample reaches the yield stress. We first study the stress transmission properties of the granular material in terms of the fabric of different subsets of contacts characterized by the magnitude of their normal forces. This analysis highlights the existence of a peculiar force carrying structure in the cemented material, which is reminiscent of the bimodal stress transmission reported for cohesionless granular media. Then, the evolution of contact forces and torques is investigated trying to identify the micromechanical conditions that trigger macroscopic yielding. It is shown that global failure can be associated to the apparition of a group of particles whose contacts fulfill at least one of the local rupture conditions. In particular, these particles form a large region that percolates through the sample at the moment of failure, evidencing the relationship between macroscopic yielding and the emergence of large-scale correlations in the system. PMID:20866608

  16. Potential active materials for photo-supercapacitor: A review

    NASA Astrophysics Data System (ADS)

    Ng, C. H.; Lim, H. N.; Hayase, S.; Harrison, I.; Pandikumar, A.; Huang, N. M.

    2015-11-01

    The need for an endless renewable energy supply, typically through the utilization of solar energy in most applications and systems, has driven the expansion, versatility, and diversification of marketed energy storage devices. Energy storage devices such as hybridized dye-sensitized solar cell (DSSC)-capacitors and DSSC-supercapacitors have been invented for energy reservation. The evolution and vast improvement of these devices in terms of their efficiencies and flexibilities have further sparked the invention of the photo-supercapacitor. The idea of coupling a DSSC and supercapacitor as a complete energy conversion and storage device arose because the solar energy absorbed by dye molecules can be efficiently transferred and converted to electrical energy by adopting a supercapacitor as the energy delivery system. The conversion efficiency of a photo-supercapacitor is mainly dependent on the use of active materials during its fabrication. The performances of the dye, photoactive metal oxide, counter electrode, redox electrolyte, and conducting polymer are the primary factors contributing to high-energy-efficient conversion, which enhances the performance and shelf-life of a photo-supercapacitor. Moreover, the introduction of compact layer as a primary adherent film has been earmarked as an effort in enhancing power conversion efficiency of solar cell. Additionally, the development of electrolyte-free solar cell such as the invention of hole-conductor or perovskite solar cell is currently being explored extensively. This paper reviews and analyzes the potential active materials for a photo-supercapacitor to enhance the conversion and storage efficiencies.

  17. Materials and Process Activities for NASA's Composite Crew Module

    NASA Technical Reports Server (NTRS)

    Polis, Daniel L.

    2012-01-01

    In January 2007, the NASA Administrator and Associate Administrator for the Exploration Systems Mission Directorate chartered the NASA Engineering and Safety Center (NESC) to design, build, and test a full-scale Composite Crew Module (CCM). The overall goal of the CCM project was to develop a team from the NASA family with hands-on experience in composite design, manufacturing, and testing in anticipation of future space exploration systems being made of composite materials. The CCM project was planned to run concurrently with the Orion project s baseline metallic design within the Constellation Program so that features could be compared and discussed without inducing risk to the overall Program. The materials and process activities were prioritized based on a rapid prototype approach. This approach focused developmental activities on design details with greater risk and uncertainty, such as out-of-autoclave joining, over some of the more traditional lamina and laminate building block levels. While process development and associated building block testing were performed, several anomalies were still observed at the full-scale level due to interactions between process robustness and manufacturing scale-up. This paper describes the process anomalies that were encountered during the CCM development and the subsequent root cause investigations that led to the final design solutions. These investigations highlight the importance of full-scale developmental work early in the schedule of a complex composite design/build project.

  18. Drought description

    USGS Publications Warehouse

    Matalas, N.C.

    1991-01-01

    What constitutes a comprehensive description of drought, a description forming a basis for answering why a drought occurred is outlined. The description entails two aspects that are "naturally" coupled, named physical and economic, and treats the set of hydrologic measures of droughts in terms of their multivariate distribution, rather than in terms of a collection of the marginal distributions. ?? 1991 Springer-Verlag.

  19. Test-Retest Reliability and descriptive analyses of the Modified Important People and Activities (MIPA) Interview

    PubMed Central

    Zywiak, William H.; Stout, Robert L.; Braciszewski, Jordan M.; Wray, Tyler B.; Longabaugh, Richard

    2016-01-01

    Background The Important People and Activities (IPA) instrument assesses network characteristics and social support for drinking and abstinence. The IPA has garnered widespread use in the alcohol treatment field. We modified the IPA to assess HIV status, drug of choice, and IV drug use among social network members. Further, we queried frequency of unprotected sex, between the participant and network members. Aim Since this measure was modified, and the test-retest reliability of the IPA has only rarely been examined, we conducted a small substudy (n=26) to examine 1-week test-retest reliability of this measure. Methods Participants were individuals in a day treatment program with an SUD and/or AUD diagnosis. Results Drug of choice for the participants represented roughly equal thirds of heroin, cocaine, and alcohol. The sample was 62% female and 39% Latino/a. At pretest 198 persons were named on the MIPA (M=7.6 network members per subject). It was determined that 152 of the people were overlapping between the test and retest. Conclusions Percent agreement, ICCs, and kappas for the items ranged from acceptable to excellent across the two time periods. Classification of network members as positive, negative, or neutral influences on sobriety also demonstrated good to excellent kappas. PMID:27429606

  20. Evaluation of physical activity programmes for elderly people - a descriptive study using the EFQM' criteria

    PubMed Central

    2011-01-01

    Background In the past years, there has been a growing concern in designing physical activity (PA) programmes for elderly people, because evidence suggests that such health promotion interventions may reduce the deleterious effects of the ageing process. Quality is an important issue when designing a PA programme for older people. Some studies support the Excellence Model of the European Foundation for Quality Management (EFQM) as an operational framework for evaluating the quality of an organization. Within this context, the aim of this study was to characterize the quality management models of the PA programmes developed by Portuguese Local Administration to enhance quality of life for elderly people, according to the criteria of the EFQM Excellence Model. Methods A methodological triangulation was conducted in 26 PA programmes using questionnaire surveys, semi-structured interviews and document analysis. We used standard approaches to the statistical analysis of data including frequencies and percentages for the categorical data. Results Results showed that Processes (65,38%), Leadership (61,03%), Customer results (58,46) and People (51,28%) had high percentage occurrences of quality practices. In contrast, Partnerships and resources (45,77%), People results (41,03%), Policy and strategy (37,91%), Key performance results (19,23%) and Society results (19,23%) had lower percentage occurrences. Conclusions Our findings suggest that although there are some good practices in PA programmes, there are still relevant areas that require improvement. PMID:21338497

  1. Active phenotypic assortment in mate selection: self-descriptions and sought-for attributes of mates in dating advertisements.

    PubMed

    Sakai, D K; Johnson, R C

    1997-01-01

    Assortative mating results both from social homogamy (coming for similar environments) and active phenotypic assortment (seeking a mate with desired attributes). Dating advertisements provide a means of assessing the role of active phenotypic assortment in the absence of social homogamy. The relative frequency of mention of different attributes (given limited advertising space) is informative regarding the salience of these attributes in active phenotypic assortment. Sex differences in self descriptions and in attributes desired in others in dating advertisements provide a means of evaluating sociobiological issues. Data were analyzed from 191 ads placed by females and 253 ads placed by males seeking to meet members of the opposite sex. The most frequently mentioned attributes are age, race, occupation, moral characteristics, and physical attractiveness. While close to 80 per cent of the advertisers provided information concerning their own race/ethnicity, only a minority of those providing such information limited their quest for a partner to members of their own race/ethnicity. There is substantial assortative mating for religion, family background, status, and educational attainment, yet these attributes are rarely (religion and education) or never (family background) mentioned in advertisements, suggesting that assortative mating on these dimensions may be solely a consequence of social homogamy.

  2. Manipulating lipid bilayer material properties using biologically active amphipathic molecules

    NASA Astrophysics Data System (ADS)

    Ashrafuzzaman, Md; Lampson, M. A.; Greathouse, D. V.; Koeppe, R. E., II; Andersen, O. S.

    2006-07-01

    Lipid bilayers are elastic bodies with properties that can be manipulated/controlled by the adsorption of amphipathic molecules. The resulting changes in bilayer elasticity have been shown to regulate integral membrane protein function. To further understand the amphiphile-induced modulation of bilayer material properties (thickness, intrinsic monolayer curvature and elastic moduli), we examined how an enantiomeric pair of viral anti-fusion peptides (AFPs)—Z-Gly-D-Phe and Z-Gly-Phe, where Z denotes a benzyloxycarbonyl group, as well as Z-Phe-Tyr and Z-D-Phe-Phe-Gly—alters the function of enantiomeric pairs of gramicidin channels of different lengths in planar bilayers. For both short and long channels, the channel lifetimes and appearance frequencies increase as linear functions of the aqueous AFP concentration, with no apparent effect on the single-channel conductance. These changes in channel function do not depend on the chirality of the channels or the AFPs. At pH 7.0, the relative changes in channel lifetimes do not vary when the channel length is varied, indicating that these compounds exert their effects primarily by causing a positive-going change in the intrinsic monolayer curvature. At pH 4.0, the AFPs are more potent than at pH 7.0 and have greater effects on the shorter channels, indicating that these compounds now change the bilayer elastic moduli. When AFPs of different anti-fusion potencies are compared, the rank order of the anti-fusion activity and the channel-modifying activity is similar, but the relative changes in anti-fusion potency are larger than the changes in channel-modifying activity. We conclude that gramicidin channels are useful as molecular force transducers to probe the influence of small amphiphiles upon lipid bilayer material properties.

  3. People can understand descriptions of motion without activating visual motion brain regions

    PubMed Central

    Dravida, Swethasri; Saxe, Rebecca; Bedny, Marina

    2013-01-01

    What is the relationship between our perceptual and linguistic neural representations of the same event? We approached this question by asking whether visual perception of motion and understanding linguistic depictions of motion rely on the same neural architecture. The same group of participants took part in two language tasks and one visual task. In task 1, participants made semantic similarity judgments with high motion (e.g., “to bounce”) and low motion (e.g., “to look”) words. In task 2, participants made plausibility judgments for passages describing movement (“A centaur hurled a spear … ”) or cognitive events (“A gentleman loved cheese …”). Task 3 was a visual motion localizer in which participants viewed animations of point-light walkers, randomly moving dots, and stationary dots changing in luminance. Based on the visual motion localizer we identified classic visual motion areas of the temporal (MT/MST and STS) and parietal cortex (inferior and superior parietal lobules). We find that these visual cortical areas are largely distinct from neural responses to linguistic depictions of motion. Motion words did not activate any part of the visual motion system. Motion passages produced a small response in the right superior parietal lobule, but none of the temporal motion regions. These results suggest that (1) as compared to words, rich language stimuli such as passages are more likely to evoke mental imagery and more likely to affect perceptual circuits and (2) effects of language on the visual system are more likely in secondary perceptual areas as compared to early sensory areas. We conclude that language and visual perception constitute distinct but interacting systems. PMID:24009592

  4. The IGAC activity for the development of global emissions inventories: Description and initial results. Revision

    SciTech Connect

    Benkovitz, C.M.; Graedel, T.E.

    1992-02-01

    Modeling assessments of the atmospheric chemistry, air quality and climatic conditions of the past, present and future require as input inventories of emissions of the appropriate chemical species constructed on appropriate spatial and temporal scales. The task of the Global Emissions Inventories Activity (GEIA) of the International Global Atmospheric Chemistry Project (IGAC) is the production of global inventories suitable for a range of research applications. Current GEIA programs are generally based on addressing emissions by species; these include CO{sub 2}, NH{sub 3}/N{sub 2}O, SO{sub 2}/NO{sub x}, CFC, volatile organic compounds and radioisotopes. In addition a separate program to inventory emissions from biomass burning is also being structured, plus an additional program to address data management issues for all the developing inventories. Program priorities are based on current knowledge and tasks needed to produce the desired inventories. This paper will discuss the different types of global inventories to be developed by the GEIA programs, their key characteristics, and areas to be addressed in the compilation of such inventories. Results of the first GEIA task, a survey of existing inventories and auxiliary data, will be presented. The survey included status assessments for the available inventory information for nineteen different atmospheric species or groups of species on global and regional scales and over time. Of this entire body of information, the only inventory regarded as satisfactory was that for the global emissions of CFCs. An implication of the results of these assessments is that properly gridded emissions inventories are badly needed to support atmospheric modeling calculations on a variety of spatial and temporal scales. Initial studies in the development of global inventories of sulfur dioxide, currently the most advanced GEIA program, will be presented and discussed.

  5. The IGAC activity for the development of global emissions inventories: Description and initial results

    SciTech Connect

    Benkovitz, C.M. ); Graedel, T.E. )

    1992-02-01

    Modeling assessments of the atmospheric chemistry, air quality and climatic conditions of the past, present and future require as input inventories of emissions of the appropriate chemical species constructed on appropriate spatial and temporal scales. The task of the Global Emissions Inventories Activity (GEIA) of the International Global Atmospheric Chemistry Project (IGAC) is the production of global inventories suitable for a range of research applications. Current GEIA programs are generally based on addressing emissions by species; these include CO{sub 2}, NH{sub 3}/N{sub 2}O, SO{sub 2}/NO{sub x}, CFC, volatile organic compounds and radioisotopes. In addition a separate program to inventory emissions from biomass burning is also being structured, plus an additional program to address data management issues for all the developing inventories. Program priorities are based on current knowledge and tasks needed to produce the desired inventories. This paper will discuss the different types of global inventories to be developed by the GEIA programs, their key characteristics, and areas to be addressed in the compilation of such inventories. Results of the first GEIA task, a survey of existing inventories and auxiliary data, will be presented. The survey included status assessments for the available inventory information for nineteen different atmospheric species or groups of species on global and regional scales and over time. Of this entire body of information, the only inventory regarded as satisfactory was that for the global emissions of CFCs. An implication of the results of these assessments is that properly gridded emissions inventories are badly needed to support atmospheric modeling calculations on a variety of spatial and temporal scales. Initial studies in the development of global inventories of sulfur dioxide, currently the most advanced GEIA program, will be presented and discussed.

  6. Ab-Initio Description and Prediction of Properties of Carbon-Based and Other Non-Metallic Materials

    NASA Technical Reports Server (NTRS)

    Bagayoko, D.; Zhao, G. L.; Hasan, S.

    2001-01-01

    We have resolved the long-standing problem consisting of 30%-50% theoretical underestimates of the band gaps of non-metallic materials. We describe the Bagayoko, Zhao, and Williams (BZW) method that rigorously circumvents the basis-set and variational effect presumed to be a cause of these underestimates. We present ab-initio, computational results that are in agreement with experiment for diamond (C), silicon (Si), silicon carbides (3C-SiC and 4H-SiC), and other semiconductors (GaN, BaTiO3, AlN, ZnSe, ZnO). We illustrate the predictive capability of the BZW method in the case of the newly discovered cubic phase of silicon nitride (c-Si3N4) and of selected carbon nanotabes [(10,0), and (8,4)]. Our conclusion underscores the inescapable need for the BZW method in ab-initio calculations that employ a basis set in a variational approach. Current nanoscale trends amplify this need. We estimate that the potential impact of applications of the BZW method in advancing our understanding of nonmetallic materials, in informing experiment, and particularly in guiding device design and fabrication is simply priceless.

  7. 105-K Basin Material Design Basis Feed Description for Spent Nuclear Fuel (SNF) Project Facilities VOL 2 Sludge

    SciTech Connect

    PEARCE, K.L.

    2000-04-05

    Volume 2 provides estimated chemical and radionuclide inventories of sludge currently stored within the Hanford Site's 105-K Basin This volume also provides estimated chemical and radionuclide inventories for the sludge streams expected to be generated during Spent Nuclear Fuel (SNF) Project activities.

  8. Active smart material control system for buffet alleviation

    NASA Astrophysics Data System (ADS)

    Sheta, Essam F.; Moses, Robert W.; Huttsell, Lawrence J.

    2006-05-01

    Vertical tail buffeting is a serious multidisciplinary problem that limits the performance and maneuverability of twin-tail fighter aircraft. The buffet problem occurs at high angles of attack when the vortical flow breaks down ahead of the vertical tails resulting in unsteady and unbalanced loads on the tails leading to their premature fatigue failure. An active smart material control system, using distributed piezoelectric (PZT) actuators, is developed for buffet alleviation and is presented. The surfaces of the vertical tail are equipped with PZT actuators to control the buffet responses in the first bending and torsion modes. The electrodynamics of the PZT actuators are modeled using a finite-element model. A single-input/single-output controller is designed to drive the active PZT actuators. High-fidelity analysis modules for the fluid dynamics, structural dynamics, electrodynamics of the PZT actuators, control law, fluid-structure interfacing, and grid motion are integrated into a multidisciplinary computing environment that controls the temporal synchronization of the analysis modules. The results of this study indicate that the actively controlled PZT actuators are an effective tool for buffet alleviation over wide range of angels of attack. Peak values of power spectral density of tail-tip acceleration are reduced by as much as 22% in the first bending mode and by as much as 82% in the first torsion mode. The root mean square values of tail-tip acceleration are reduced by as much as 12%.

  9. Development of active and sensitive material systems based on composites

    NASA Astrophysics Data System (ADS)

    Asanuma, Hiroshi

    2002-07-01

    This paper describes new concepts proposed by the author to realize active and sensitive structural material systems. Two examples of multifunctional composites were fabricated and evaluated in this study as follows: (1) An active laminate of aluminum plate (works as muscle), epoxy film (as insulator), unidirectional CFRP prepreg (as bone and blood vessel) and copper foil electrode (to apply voltage on CFRP) was made with an embedded optical fiber multiply fractured in the CFRP layer (works as nerve), of which curvature change could be effectively monitored with the fractured optical fiber. (2) A stainless steel fiber/aluminum active composite with embedded Ti oxide/Ti composite fiber was fabricated. The Ti oxide/Ti fiber could work as a sensor for temperature by removing a part of the oxide before embedment to make a metallic contact between the embedded titanium fiber and aluminum matrix to be able to generate thermal electromotive force, and also could work as a sensor for strain and as a heater for actuation. In the both cases, the outputs from their embedded sensors can be used to control their actuations.

  10. Addressing Different Active Neutron Interrogation Signatures from Fissionable Material

    SciTech Connect

    D. L. Chichester; E. H. Seabury

    2009-10-01

    In a continuing effort to examine portable methods for implementing active neutron interrogation for detecting shielded fissionable material research is underway to investigate the utility of analyzing multiple time-correlated signatures. Time correlation refers here to the existence of unique characteristics of the fission interrogation signature related to the start and end of an irradiation, as well as signatures present in between individual pulses of an irradiating source. Traditional measurement approaches in this area have typically worked to detect die-away neutrons after the end of each pulse, neutrons in between pulses related to the decay of neutron emitting fission products, or neutrons or gamma rays related to the decay of neutron emitting fission products after the end of an irradiation exposure. In this paper we discus the potential weaknesses of assessing only one signature versus multiple signatures and make the assertion that multiple complimentary and orthogonal measurements should be used to bolster the performance of active interrogation systems, helping to minimize susceptibility to the weaknesses of individual signatures on their own. Recognizing that the problem of detection is a problem of low count rates, we are exploring methods to integrate commonly used signatures with rarely used signatures to improve detection capabilities for these measurements. In this paper we will discuss initial activity in this area with this approach together with observations of some of the strengths and weaknesses of using these different signatures.

  11. Description of new dry granular materials of variable cohesion and friction coefficient: Implications for laboratory modeling of the brittle crust

    NASA Astrophysics Data System (ADS)

    Abdelmalak, M. M.; Bulois, C.; Mourgues, R.; Galland, O.; Legland, J.-B.; Gruber, C.

    2016-08-01

    Cohesion and friction coefficient are fundamental parameters for scaling brittle deformation in laboratory models of geological processes. However, they are commonly not experimental variable, whereas (1) rocks range from cohesion-less to strongly cohesive and from low friction to high friction and (2) strata exhibit substantial cohesion and friction contrasts. This brittle paradox implies that the effects of brittle properties on processes involving brittle deformation cannot be tested in laboratory models. Solving this paradox requires the use of dry granular materials of tunable and controllable brittle properties. In this paper, we describe dry mixtures of fine-grained cohesive, high friction silica powder (SP) and low-cohesion, low friction glass microspheres (GM) that fulfill this requirement. We systematically estimated the cohesions and friction coefficients of mixtures of variable proportions using two independent methods: (1) a classic Hubbert-type shear box to determine the extrapolated cohesion (C) and friction coefficient (μ), and (2) direct measurements of the tensile strength (T0) and the height (H) of open fractures to calculate the true cohesion (C0). The measured values of cohesion increase from 100 Pa for pure GM to 600 Pa for pure SP, with a sub-linear trend of the cohesion with the mixture GM content. The two independent cohesion measurement methods, from shear tests and tension/extensional tests, yield very similar results of extrapolated cohesion (C) and show that both are robust and can be used independently. The measured values of friction coefficients increase from 0.5 for pure GM to 1.05 for pure SP. The use of these granular material mixtures now allows testing (1) the effects of cohesion and friction coefficient in homogeneous laboratory models and (2) testing the effect of brittle layering on brittle deformation, as demonstrated by preliminary experiments. Therefore, the brittle properties become, at last, experimental variables.

  12. Canada's Physical Activity Guide: examining print-based material for motivating physical activity in the workplace.

    PubMed

    Plotnikoff, Ronald C; Todosijczuk, Ivan; Johnson, Steven T; Karunamuni, Nandini

    2012-01-01

    The authors conducted a secondary analysis on 202 adults from the Physical Activity Workplace Study. The aim of this analysis was to examine demographic characteristics associated with reading Canada's Physical Activity Guide (CPAG), being motivated by the guide, and whether participants in the Physical Activity Workplace Study who read the CPAG increased their physical activity levels over 1 year. Results revealed that less than 50% of participants read the full version of CPAG, and less than 10% were motivated by it. The CPAG also appears to be more appealing to and effective for women than for men. Although the CPAG had some influence in increasing mild physical activity levels in a workplace sample, there was also a decrease in physical activity levels among some members of the group. Overall, the effectiveness of CPAG was not substantial, and the findings of this analysis could help guide future targeted intervention materials and programs.

  13. Surface modification of active material structures in battery electrodes

    DOEpatents

    Erickson, Michael; Tikhonov, Konstantin

    2016-02-02

    Provided herein are methods of processing electrode active material structures for use in electrochemical cells or, more specifically, methods of forming surface layers on these structures. The structures are combined with a liquid to form a mixture. The mixture includes a surface reagent that chemically reacts and forms a surface layer covalently bound to the structures. The surface reagent may be a part of the initial liquid or added to the mixture after the liquid is combined with the structures. In some embodiments, the mixture may be processed to form a powder containing the structures with the surface layer thereon. Alternatively, the mixture may be deposited onto a current collecting substrate and dried to form an electrode layer. Furthermore, the liquid may be an electrolyte containing the surface reagent and a salt. The liquid soaks the previously arranged electrodes in order to contact the structures with the surface reagent.

  14. Overview of Indian activities on fusion reactor materials

    NASA Astrophysics Data System (ADS)

    Banerjee, Srikumar

    2014-12-01

    This paper on overview of Indian activities on fusion reactor materials describes in brief the efforts India has made to develop materials for the first wall of a tokamak, its blanket and superconducting magnet coils. Through a systematic and scientific approach, India has developed and commercially produced reduced activation ferritic/martensitic (RAFM) steel that is comparable to Eurofer 97. Powder of low activation ferritic/martensitic oxide dispersion strengthened steel with characteristics desired for its application in the first wall of a tokamak has been produced on the laboratory scale. V-4Cr-4Ti alloy was also prepared in the laboratory, and kinetics of hydrogen absorption in this was investigated. Cu-1 wt%Cr-0.1 wt%Zr - an alloy meant for use as heat transfer elements for hypervapotrons and heat sink for the first wall - was developed and characterized in detail for its aging behavior. The role of addition of a small quantity of Zr in its improved fatigue performance was delineated, and its diffusion bonding with both W and stainless steel was achieved using Ni as an interlayer. The alloy was produced in large quantities and used for manufacturing both the heat transfer elements and components for the International Thermonuclear Experimental Reactor (ITER). India has proposed to install and test a lead-lithium cooled ceramic breeder test blanket module (LLCB-TBM) at ITER. To meet this objective, efforts have been made to produce and characterize Li2TiO3 pebbles, and also improve the thermal conductivity of packed beds of these pebbles. Liquid metal loops have been set up and corrosion behavior of RAFM steel in flowing Pb-Li eutectic has been studied in the presence as well as absence of magnetic fields. To prevent permeation of tritium and reduce the magneto-hydro-dynamic drag, processes have been developed for coating alumina on RAFM steel. Apart from these activities, different approaches being attempted to make the U-shaped first wall of the TBM box

  15. Engineering Fluorogen Activating Proteins into Self-Assembling Materials

    PubMed Central

    Saunders, Matthew J.; Liu, Wen; Szent-Gyorgyi, Christopher; Wen, Yi; Drennen, Zachary; Waggoner, Alan S.; Meng, Wilson S.

    2013-01-01

    We present herein characteristics of a conjugate in which dL5, a fluorogen-activating protein (FAP) and AEAEAKAK, an amphiphilic peptide are combined to form a solid-phase fluorescence-detection platform. The FAP dL5 is a covalently linked dimer of two identical light chain variable fragments which activates the fluorescence of the fluorogen malachite green (MG). The amphiphilic peptide of sequence AEAEAKAK is a building block of stimuli-responsive materials that undergoes sol-gel phase transition at high ionic strengths. We hypothesize that the novel bi-functional protein containing both the FAP and the amphiphile, termed dL5_EAK, co-assembles with the self-assembling peptide [AEAEAKAK]2 (EAK16-II) to form an insoluble membrane composite whereby the fluorescence enhancement function of the FAP domain remains intact. Denaturing polyacrylamide electrophoresis indicated that greater than 78% of dL5_EAK incorporates into the EAK16-II membrane. Conversely, less than 32% of dL5 without the EAK sequence associates with the insoluble fraction of EAK16-II in buffers. Membranes containing dL5_EAK and EAK16-II exhibited at least 4-fold higher fluorescence intensity compared to mixtures containing dL5 and EAK16-II. Scanning electron microscopy revealed the presence of particulates, presumably FAPs, scattering on the membrane fibrils. The evidence suggests a system of materials that can be developed into in situ-forming local sensors by immobilizing dL5 into coacervate, on which MG can be detected. It is envisioned that dL5 membranes can be established in diseased locales to monitor infiltration and migration of inflammatory cells marked with antibodies conjugated to MG. PMID:23573960

  16. 77 FR 38395 - Agency Information Collection Activities (Advertising, Sales, and Enrollment Materials, and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-06-27

    ... AFFAIRS Agency Information Collection Activities (Advertising, Sales, and Enrollment Materials, and... ``OMB Control No. 2900-0682.'' SUPPLEMENTARY INFORMATION: Title: Advertising, Sales, and Enrollment... advertising, sales materials, enrollment materials, or candidate handbooks that educational institutions...

  17. Activities for Teaching about Hazardous Materials in the Home.

    ERIC Educational Resources Information Center

    Howe, Robert W.; And Others

    Materials containing hazardous substances present serious problems to human health and to the health of the environment. There are many potential problems related to the site of a house or apartment, the construction materials used in the house or the apartment, products and materials used in and around the home, and disposal of materials.…

  18. Activation and waste management considerations of fusion materials

    NASA Astrophysics Data System (ADS)

    Cheng, E. T.; Saji, G.

    1994-09-01

    Inconel-625 (Ni625), SS316, Ti-6Al-4V (Ti64), ferritic steel (FS), reduced activity ferritic steel (RAFS), manganese steel (Mn-steel), and V5Cr5Ti (V55), were examined for a near-term experimental D-T fueled fusion power reactor with respect to waste management. Activation calculations for these materials were performed assuming one year continuous operation at 1 MW/m 2 wall loading. The results show that the blanket components made of V55, Ti64, Mn-steel, and FS will be allowed for transfer to an on-site dry storage facility after 10 years of cooling after discharge. To transport the discharged blanket components to a permanent disposal site, the cooling time needed can be within 10 years for Ti64 and V55, provided that the impurities (mainly Ni, Nb and Mo) be controlled to an acceptable level. The RAFS and Mn-steel will need about 30 y cooling time because of its Fe and Mn contents. Ni625, 316SS, and FS, however, will require more than 50000 y cooling time because of their Nb and Mo contents. The RAFS, Mn-steel, Ti64 and V55 can be shallow-land wastes if the impurity level for Nb and Mo is dropped below 10 ppm.

  19. 105-K Basin material design basis feed description for spent nuclear fuel project facilities. Volume 2: Sludge

    SciTech Connect

    Pearce, K.L.

    1998-08-30

    Volume 2 provides the design feed compositions for the baseline K East and K West Basin sludge process streams expected to be generated during Spent Nuclear Fuel (SNF) Project activities. Four types of feeds are required to support evaluation of specific facility and process considerations during the development of new facilities and processes. These four design feeds provide nominal and bounding conditions for design evaluations. Volume 2 includes definition of inventories for: (1) KE and KW Basins sludge locations (pit sludges, floor sludge, canister.sludge, and wash sludge components), (2) nominal feed for each of five process feed streams, (3) shielding design feed, (4) safety/regulatory assessment feed, and (5) criticality assessment feed.

  20. ReflectoActive{trademark} Seals for Materials Control and Accountability

    SciTech Connect

    Richardson, G.D.; Younkin, J.R.; Bell, Z.W.

    2002-01-01

    The ReflectoActive{trademark} Seals system, a continuously monitored fiber optic, active seal technology, provides real-time tamper indication for large arrays of storage containers. The system includes a PC running the RFAS software, an Immediate Detection Unit (IDU), an Optical Time Domain Reflectometer (OTDR), links of fiber optic cable, and the methods and devices used to attach the fiber optic cable to the containers. When a breach on any of the attached fiber optic cable loops occurs, the IDU immediately signals the connected computer to control the operations of an OTDR to seek the breach location. The ReflectoActive{trademark} Seals System can be adapted for various types of container closure designs and implemented in almost any container configuration. This automatic protection of valued assets can significantly decrease the time and money required for surveillance. The RFAS software is the multi-threaded, client-server application that monitors and controls the components of the system. The software administers the security measures such as a two-person rule as well as continuous event logging. Additionally the software's architecture provides a secure method by which local or remote clients monitor the system and perform administrative tasks. These features provide the user with a robust system to meet today's material control and accountability needs. A brief overview of the hardware, and different hardware configurations will be given. The architecture of the system software, and its benefits will then be discussed. Finally, the features to be implemented in future versions of the system will be presented.

  1. (Bio)hybrid materials based on optically active particles

    NASA Astrophysics Data System (ADS)

    Reitzig, Manuela; Härtling, Thomas; Opitz, Jörg

    2014-03-01

    In this contribution we provide an overview of current investigations on optically active particles (nanodiamonds, upconversion phospors) for biohybrid and sensing applications. Due to their outstanding properties nanodiamonds gain attention in various application elds such as microelectronics, optical monitoring, medicine, and biotechnology. Beyond the typical diamond properties such as high thermal conductivity and extreme hardness, the carbon surface and its various functional groups enable diverse chemical and biological surface functionalization. At Fraunhofer IKTS-MD we develop a customization of material surfaces via integration of chemically modi ed nanodiamonds at variable surfaces, e.g bone implants and pipelines. For the rst purpose, nanodiamonds are covalently modi ed at their surface with amino or phosphate functionalities that are known to increase adhesion to bone or titanium alloys. The second type of surface is approached via mechanical implementation into coatings. Besides nanodiamonds, we also investigate the properties of upconversion phosphors. In our contribution we show how upconversion phosphors are used to verify sterilization processes via a change of optical properties due to sterilizing electron beam exposure.

  2. Characteristics and antimicrobial activity of copper-based materials

    NASA Astrophysics Data System (ADS)

    Li, Bowen

    In this study, copper vermiculite was synthesized, and the characteristics, antimicrobial effects, and chemical stability of copper vermiculite were investigated. Two types of copper vermiculite materials, micron-sized copper vermiculite (MCV) and exfoliated copper vermiculite (MECV), are selected for this research. Since most of the functional fillers used in industry products, such as plastics, paints, rubbers, papers, and textiles prefer micron-scaled particles, micron-sized copper vermiculite was prepared by jet-milling vermiculite. Meanwhile, since the exfoliated vermiculite has very unique properties, such as high porosity, specific surface area, high aspect ratio of laminates, and low density, and has been extensively utilized as a functional additives, exfoliated copper vermiculite also was synthesized and investigated. The antibacterial efficiency of copper vermiculite was qualitatively evaluated by the diffusion methods (both liquid diffusion and solid diffusion) against the most common pathogenic species: Escherichia coli (E. coli), Staphylococcus aureus (S. aureus), and Klebsiella pneumoniae (K. pneumoniae). The result showed that the release velocity of copper from copper vermiculite is very slow. However, copper vermiculite clearly has excellent antibacterial efficiency to S. aureus, K. pneumoniae and E. coli. The strongest antibacterial ability of copper vermiculite is its action on S. aureus. The antibacterial efficiency of copper vermiculite was also quantitatively evaluated by determining the reduction rate (death rate) of E. coli versus various levels of copper vermiculite. 10 ppm of copper vermiculite in solution is sufficient to reduce the cell population of E. coli, while the untreated vermiculite had no antibacterial activity. The slow release of copper revealed that the antimicrobial effect of copper vermiculite was due to the strong interactions between copper ions and bacteria cells. Exfoliated copper vermiculite has even stronger

  3. E-Learning Activity-Based Material Recommendation System

    ERIC Educational Resources Information Center

    Liu, Feng-jung; Shih, Bai-jiun

    2007-01-01

    Purpose: Computer based systems have great potential for delivering learning material. However, problems are encountered, such as: difficulty of Learning resource sharing, high redundancy of learning material, and deficiency of the course brief. In order to solve these problems, this paper aims to propose an automatic inquiring system for learning…

  4. Dissolution of a surfactant-containing active porous material.

    PubMed

    Brielles, Nelly; Chantraine, Florence; Viana, Marylène; Chulia, Dominique; Branlard, Paul; Rubinstenn, Gilles; Lequeux, François; Mondain-Monval, Olivier

    2008-12-15

    We have studied the imbibition and dissolution of a porous material in two separate scenarios: (1) when the porous material contains a surfactant powder and (2) when the porous material is dissolved in a surfactant solution. We show that the dissolution kinetics in both scenarios is significantly affected by the presence of the surfactant and results in an increase in the characteristic imbibition time of the porous material, which can be well understood in the framework of the classical law of capillarity. Slowing of the imbibition kinetics was found to be affected by a modification of the liquid wetting properties, but is also affected by a variation in the solubility of the porous material in the presence of the surfactant. Furthermore, there is a depletion effect of the surfactant inside the rising liquid, which is in good agreement with previous work and theoretical predictions.

  5. Electron-beam activated thermal sputtering of thermoelectric materials

    SciTech Connect

    Wu Jinsong; Dravid, Vinayak P.; He Jiaqing; Han, Mi-Kyung; Sootsman, Joseph R.; Girard, Steven; Arachchige, Indika U.; Kanatzidis, Mercouri G.

    2011-08-15

    Thermoelectricity and Seebeck effect have long been observed and validated in bulk materials. With the development of advanced tools of materials characterization, here we report the first observation of such an effect in the nanometer scale: in situ directional sputtering of several thermoelectric materials inside electron microscopes. The temperature gradient introduced by the electron beam creates a voltage-drop across the samples, which enhances spontaneous sputtering of specimen ions. The sputtering occurs along a preferential direction determined by the direction of the temperature gradient. A large number of nanoparticles form and accumulate away from the beam location as a result. The sputtering and re-crystallization are found to occur at temperatures far below the melting points of bulk materials. The sputtering occurs even when a liquid nitrogen cooling holder is used to keep the overall temperature at -170 deg. C. This unique phenomenon that occurred in the nanometer scale may provide useful clues to understanding the mechanism of thermoelectric effect.

  6. Electron-beam activated thermal sputtering of thermoelectric materials.

    SciTech Connect

    Wu, J.; He, J.; Han, M-K.; Sootsman, J. R.; Girard, S.; Arachchige, I. U.; Kanatzidis, M. G.; Dravid, V. P.

    2011-08-01

    Thermoelectricity and Seebeck effect have long been observed and validated in bulk materials. With the development of advanced tools of materials characterization, here we report the first observation of such an effect in the nanometer scale: in situ directional sputtering of several thermoelectric materials inside electron microscopes. The temperature gradient introduced by the electron beam creates a voltage-drop across the samples, which enhances spontaneous sputtering of specimen ions. The sputtering occurs along a preferential direction determined by the direction of the temperature gradient. A large number of nanoparticles form and accumulate away from the beam location as a result. The sputtering and re-crystallization are found to occur at temperatures far below the melting points of bulk materials. The sputtering occurs even when a liquid nitrogen cooling holder is used to keep the overall temperature at -170 C. This unique phenomenon that occurred in the nanometer scale may provide useful clues to understanding the mechanism of thermoelectric effect.

  7. Applying the Model of Goal-Directed Behavior, Including Descriptive Norms, to Physical Activity Intentions: A Contribution to Improving the Theory of Planned Behavior.

    PubMed

    Esposito, Gabriele; van Bavel, René; Baranowski, Tom; Duch-Brown, Néstor

    2016-08-01

    The theory of planned behavior (TPB) has received its fair share of criticism lately, including calls for it to retire. We contribute to improving the theory by testing extensions such as the model of goal-directed behavior (MGDB, which adds desire and anticipated positive and negative emotions) applied to physical activity (PA) intention. We also test the inclusion of a descriptive norms construct as an addition to the subjective norms construct, also applied to PA, resulting in two additional models: TPB including descriptive norms (TPB + DN) and MGDB including descriptive norms (MGDB + DN). The study is based on an online survey of 400 young adult Internet users, previously enrolled in a subject pool. Confirmatory factor analysis (CFA) showed that TPB and TPB + DN were not fit for purpose, while MGDB and MGDB + DN were. Structural equation modelling (SEM) conducted on MGDB and MGDB + DN showed that the inclusion of descriptive norms took over the significance of injunctive norms, and increased the model's account of total variance in intention to be physically active. PMID:27229344

  8. Characteristics and antimicrobial activity of copper-based materials

    NASA Astrophysics Data System (ADS)

    Li, Bowen

    In this study, copper vermiculite was synthesized, and the characteristics, antimicrobial effects, and chemical stability of copper vermiculite were investigated. Two types of copper vermiculite materials, micron-sized copper vermiculite (MCV) and exfoliated copper vermiculite (MECV), are selected for this research. Since most of the functional fillers used in industry products, such as plastics, paints, rubbers, papers, and textiles prefer micron-scaled particles, micron-sized copper vermiculite was prepared by jet-milling vermiculite. Meanwhile, since the exfoliated vermiculite has very unique properties, such as high porosity, specific surface area, high aspect ratio of laminates, and low density, and has been extensively utilized as a functional additives, exfoliated copper vermiculite also was synthesized and investigated. The antibacterial efficiency of copper vermiculite was qualitatively evaluated by the diffusion methods (both liquid diffusion and solid diffusion) against the most common pathogenic species: Escherichia coli (E. coli), Staphylococcus aureus (S. aureus), and Klebsiella pneumoniae (K. pneumoniae). The result showed that the release velocity of copper from copper vermiculite is very slow. However, copper vermiculite clearly has excellent antibacterial efficiency to S. aureus, K. pneumoniae and E. coli. The strongest antibacterial ability of copper vermiculite is its action on S. aureus. The antibacterial efficiency of copper vermiculite was also quantitatively evaluated by determining the reduction rate (death rate) of E. coli versus various levels of copper vermiculite. 10 ppm of copper vermiculite in solution is sufficient to reduce the cell population of E. coli, while the untreated vermiculite had no antibacterial activity. The slow release of copper revealed that the antimicrobial effect of copper vermiculite was due to the strong interactions between copper ions and bacteria cells. Exfoliated copper vermiculite has even stronger

  9. Chemically active organically doped sol-gel materials: enzymatic sensors, chemical sensors, and photoactive materials

    NASA Astrophysics Data System (ADS)

    Avnir, David; Braun, S.; Lev, Ovadia; Ottolenghi, M.

    1992-12-01

    Organically-doped porous sol-gel matrices of optical grade have evolved in recent years into a wide class of materials with diverse applications. We review recent progress made in our laboratories in three domains of applications: the trapping of enzymes with the consequent design of (e.g. glucose) sensors; the development of chemical sensors; and the design of photoactive material for (solar) light energy conversion.

  10. NASA's activities in the conservation of strategic aerospace materials

    NASA Technical Reports Server (NTRS)

    Stephens, J. R.

    1980-01-01

    The United States imports 50-100 percent of certain metals critical to the aerospace industry, namely, cobalt, columbium, chromium, and tantalum. In an effort to reduce this dependence on foreign sources, NASA is planning a program called Conservation of Strategic Aerospace Materials (COSAM), which will provide technology minimizing strategic metal content in the components of aerospace structures such as aircraft engines. With a proposed starting date of October 1981, the program will consist of strategic element substitution, process technology development, and alternate materials research. NASA's two-fold pre-COSAM studies center on, first, substitution research involving nickel-base and cobalt-base superalloys (Waspaloy, Udimet-700, MAE-M247, Rene 150, HA-188) used in turbine disks, low-pressure blades, turbine blades, and combustors; and, second, alternate materials research devoted initially to investigating possible structural applications of the intermetallic alloys nickel aluminide and iron aluminide.

  11. Transfer having a coupling coefficient higher than its active material

    NASA Technical Reports Server (NTRS)

    Lesieutre, George A. (Inventor); Davis, Christopher L. (Inventor)

    2001-01-01

    A coupling coefficient is a measure of the effectiveness with which a shape-changing material (or a device employing such a material) converts the energy in an imposed signal to useful mechanical energy. Device coupling coefficients are properties of the device and, although related to the material coupling coefficients, are generally different from them. This invention describes a class of devices wherein the apparent coupling coefficient can, in principle, approach 1.0, corresponding to perfect electromechanical energy conversion. The key feature of this class of devices is the use of destabilizing mechanical pre-loads to counter inherent stiffness. The approach is illustrated for piezoelectric and thermoelectrically actuated devices. The invention provides a way to simultaneously increase both displacement and force, distinguishing it from alternatives such as motion amplification, and allows transducer designers to achieve substantial performance gains for actuator and sensor devices.

  12. Review of activities in USA on HTS materials

    SciTech Connect

    Peterson, D.E.

    1995-02-01

    Rapid progress in attaining practical applications of High Temperature Superconductors (HTS) has been made since the discovery of these new materials. Many critical parameters influencing HTS powder synthesis and wire processing have been identified through a combination of fundamental exploration and applied research. The complexity of these novel materials with regard to phase behavior and physical properties has become evident as a result of these careful studies. Achieving optimal mechanical and superconducting properties in wires and tapes will require further understanding and synergy among several different technical disciplines. Highlights of efforts towards producing practical superconductors for electric power applications based on rare earth-, bismuth-, and thallium-based systems are reviewed.

  13. Examination of the haemolytic activity of sol-gel materials

    NASA Astrophysics Data System (ADS)

    Ulatowska-Jarza, Agnieszka; Podbielska, Halina; Holowacz, Iwona; Lechna-Marczynska, Monika I.; Szymonowicz, Maria; Staniszewska-Kus, Jolanta; Paluch, Danuta

    2001-10-01

    Recently, the sol-gel based biomaterials are extendedly investigated with emphasis on theirs various applications, including medical ones. In this respect it is important to investigate the influence of sol-gel matrices on biological systems. The results of laboratory and biological testing of aqueous extracts of sol-gels are presented in this work. It was proved that it is possible to produce the sol-gel derived materials that will be non-haemolytic. This can be achieved by heating the materials in elevated temperatures. This effect can also be reached by suitably long aging (minimum 6 months).

  14. Cosmogenic activation of materials used in rare event search experiments

    NASA Astrophysics Data System (ADS)

    Zhang, C.; Mei, D.-M.; Kudryavtsev, V. A.; Fiorucci, S.

    2016-11-01

    We evaluate the cosmogenic production rates in some materials that are commonly used as targets and shielding/supporting components for detecting rare events. The results from Geant4 simulations and the calculations of ACTIVIA are compared with the available experimental data. We demonstrate that the production rates from the Geant4-based simulations agree with the available data reasonably well. As a result, we report that the cosmogenic production of several isotopes in various materials can generate potential backgrounds for direct detection of dark matter and neutrinoless double-beta decay.

  15. Teaching Descriptive Style.

    ERIC Educational Resources Information Center

    Brashers, H. C.

    1968-01-01

    As the inexperienced writer becomes aware of the issues involved in the composition of effective descriptive prose, he also develops a consistent control over his materials. The persona he chooses, if coherently thought out, can function as an index of many choices, helping him to manipulate the tone, intent, and mood of this style; to regulate…

  16. Anaphoric Descriptions

    ERIC Educational Resources Information Center

    Beller, Charley

    2013-01-01

    The study of definite descriptions has been a central part of research in linguistics and philosophy of language since Russell's seminal work "On Denoting" (Russell 1905). In that work Russell quickly dispatches analyses of denoting expressions with forms like "no man," "some man," "a man," and "every…

  17. Job Creation: Creative Materials, Activities, & Strategies for the Classroom.

    ERIC Educational Resources Information Center

    Smutny, Joan Franklin; And Others

    Designed for use by high school students, their teachers, and counselors, these six learning modules contain creative materials to encourage individuals to think about their own talents, skills, interests, and capacities for job creation. Each module consists of student worksheets and teacher guides. Covered in the first five modules are the…

  18. Review of smart material technologies for active parachute applications

    NASA Astrophysics Data System (ADS)

    Favini, Eric; Niezrecki, Christopher; Chen, Julie; Willis, David; Niemi, Eugene; Desabrais, Kenneth

    2010-04-01

    The performance (drag, lift, stability, etc.) of a parachute is a function of the physical properties of the canopy fabric (such as porosity) and geometry of the canopy (such as air-vent openings). These variables typically remain constant during descent and therefore the parachute retains constant drag and lift. The ability to change these variables and the parachute drag and lift characteristics during flight will greatly widen the performance envelope of a parachute, the maneuverability, and versatility of the airdrop mission. This paper provides a literature review of existing smart material technologies in an effort to improve the performance characteristics and enhance the safety of existing parachutes and parafoils by incorporating these advanced materials into parachute systems.

  19. NASA's activities in the conservation of strategic aerospace materials

    NASA Technical Reports Server (NTRS)

    Stephens, J. R.

    1980-01-01

    The primary objective of the Conservation of Strategic Aerospace Materials (COSAM) Program is to help reduce the dependence of the United States aerospace industry on strategic metals by providing the materials technology needed to minimize the strategic metal content of critical aerospace components with prime emphasis on components for gas turbine engines. Initial emphasis was placed in the area of strategic element substinction. Specifically, the role of cobalt in nickel base and cobalt base superalloys vital to the aerospace industry is being examined in great detail by means of cooperative university-industry-government research efforts. Investigations are underway in the area of "new classes" of alloys. Specifically, a study was undertaken to investigate the mechanical and physical properties of intermetallics that contain a minimum of the strategic metals. Current plans for the much larger COSAM Program are also presented.

  20. Passive and active sol-gel materials and devices

    NASA Astrophysics Data System (ADS)

    Andrews, Mark P.; Najafi, S. Iraj

    1997-07-01

    This paper examines sol-gel materials for photonics in terms of partnerships with other material contenders for processing optical devices. The discussion in four sections identifies semiconductors, amorphous and crystalline inorganic dielectrics, and amorphous and crystalline organic dielectrics as strategic agents in the rapidly evolving area of materials and devices for data communications and telecommunications. With Zyss, we trace the hierarchical lineage that connects molecular hybridization (chemical functionality), through supramolecular hybridization (collective properties and responses), to functional hybridization (device and system level constructs). These three concepts thread their way through discussions of the roles sol-gel glasses might be anticipated to assume in a photonics marketplace. We assign a special place to glass integrated optics and show how high temperature consolidated sol-gel derived glasses fit into competitive glass fabrication technologies. Low temperature hybrid sol-gel glasses that combine attractive features of organic polymers and inorganic glasses are considered by drawing on examples of our own new processes for fabricating couplers, power splitters, waveguides and gratings by combining chemical synthesis and sol-gel processing with simple photomask techniques.

  1. Materials for Consideration in Standardized Canister Design Activities.

    SciTech Connect

    Bryan, Charles R.; Ilgen, Anastasia Gennadyevna; Enos, David George; Teich-McGoldrick, Stephanie; Hardin, Ernest

    2014-10-01

    This document identifies materials and material mitigation processes that might be used in new designs for standardized canisters for storage, transportation, and disposal of spent nuclear fuel. It also addresses potential corrosion issues with existing dual-purpose canisters (DPCs) that could be addressed in new canister designs. The major potential corrosion risk during storage is stress corrosion cracking of the weld regions on the 304 SS/316 SS canister shell due to deliquescence of chloride salts on the surface. Two approaches are proposed to alleviate this potential risk. First, the existing canister materials (304 and 316 SS) could be used, but the welds mitigated to relieve residual stresses and/or sensitization. Alternatively, more corrosion-resistant steels such as super-austenitic or duplex stainless steels, could be used. Experimental testing is needed to verify that these alternatives would successfully reduce the risk of stress corrosion cracking during fuel storage. For disposal in a geologic repository, the canister will be enclosed in a corrosion-resistant or corrosion-allowance overpack that will provide barrier capability and mechanical strength. The canister shell will no longer have a barrier function and its containment integrity can be ignored. The basket and neutron absorbers within the canister have the important role of limiting the possibility of post-closure criticality. The time period for corrosion is much longer in the post-closure period, and one major unanswered question is whether the basket materials will corrode slowly enough to maintain structural integrity for at least 10,000 years. Whereas there is extensive literature on stainless steels, this evaluation recommends testing of 304 and 316 SS, and more corrosion-resistant steels such as super-austenitic, duplex, and super-duplex stainless steels, at repository-relevant physical and chemical conditions. Both general and localized corrosion testing methods would be used to

  2. Activated Charcoal—A Potential Material in Glucoamylase Recovery

    PubMed Central

    Kareem, S. O.; Akpan, I.; Popoola, T. O. S.; Sanni, L. O.

    2011-01-01

    The potential of activated charcoal in the purification of fungal glucoamylase was investigated. Various concentrations of activated charcoal (1–4% w/v) were used to concentrate crude glucoamylase from Rhizopus oligosporus at different temperature values (30–50°C). Effects of pH (3.0–6.0) and contact time (0–60 min) on enzyme purification were also monitored. Activated charcoal (3% w/v) gave a 16-fold purification in a single-step purification at 50°C for 20 min and pH 5.5. The result of SDS-PAGE analysis of purified glucoamylase showed two major protein bands with corresponding molecular weight of 36 kDa and 50 kDa. The method is inexpensive, rapid, and simple which could facilitate downstream processing of industrial enzyme. PMID:22235364

  3. Using luminescent materials as the active element for radiation sensors

    NASA Astrophysics Data System (ADS)

    Hollerman, William A.; Fontenot, Ross S.; Williams, Stephen; Miller, John

    2016-05-01

    Ionizing radiation poses a significant challenge for Earth-based defense applications as well as human and/or robotic space missions. Practical sensors based on luminescence will depend heavily upon research investigating the resistance of these materials to ionizing radiation and the ability to anneal or self-heal from damage caused by such radiation. In 1951, Birks and Black showed experimentally that the luminescent efficiency of anthracene bombarded by alphas varies with total fluence (N) as (I/I0) = 1/(1 + AN), where I is the luminescence yield, I0 is the initial yield, and A is a constant. The half brightness (N1/2) is defined as the fluence that reduce the emission light yield to half and is equal to is the inverse of A. Broser and Kallmann developed a similar relationship to the Birks and Black equation for inorganic phosphors irradiated using alpha particles. From 1990 to the present, we found that the Birks and Black relation describes the reduction in light emission yield for every tested luminescent material except lead phosphate glass due to proton irradiation. These results indicate that radiation produced quenching centers compete with emission for absorbed energy. The purpose of this paper is to present results from research completed in this area over the last few years. Particular emphasis will be placed on recent measurements made on new materials such as europium tetrakis dibenzoylmethide triethylammonium (EuD4TEA). Results have shown that EuD4TEA with its relatively small N1/2 might be a good candidate for use as a personal proton fluence sensor.

  4. Activated carbon fiber composite material and method of making

    DOEpatents

    Burchell, Timothy D.; Weaver, Charles E.; Chilcoat, Bill R.; Derbyshire, Frank; Jagtoyen, Marit

    2000-01-01

    An activated carbon fiber composite for separation and purification, or catalytic processing of fluids is described. The activated composite comprises carbon fibers rigidly bonded to form an open, permeable, rigid monolith capable of being formed to near-net-shape. Separation and purification of gases are effected by means of a controlled pore structure that is developed in the carbon fibers contained in the composite. The open, permeable structure allows the free flow of gases through the monolith accompanied by high rates of adsorption. By modification of the pore structure and bulk density the composite can be rendered suitable for applications such as gas storage, catalysis, and liquid phase processing.

  5. Activated carbon fiber composite material and method of making

    DOEpatents

    Burchell, Timothy D.; Weaver, Charles E.; Chilcoat, Bill R.; Derbyshire, Frank; Jagtoyen, Marit

    2001-01-01

    An activated carbon fiber composite for separation and purification, or catalytic processing of fluids is described. The activated composite comprises carbon fibers rigidly bonded to form an open, permeable, rigid monolith capable of being formed to near-net-shape. Separation and purification of gases are effected by means of a controlled pore structure that is developed in the carbon fibers contained in the composite. The open, permeable structure allows the free flow of gases through the monolith accompanied by high rates of adsorption. By modification of the pore structure and bulk density the composite can be rendered suitable for applications such as gas storage, catalysis, and liquid phase processing.

  6. Materials and Activities for Teachers and Children (MATCH). Program Report.

    ERIC Educational Resources Information Center

    Bye, Margaret

    Self contained multi-media kits for grades 1 through 6 involve students directly in the learning process. Emphasis is on non-verbal learning which takes place when youngsters examine real objects and engage in learning activities. Involved in the discovery and inquiry process, students hypothesize, classify, and categorize. In an interdisciplinary…

  7. Digital active material processing platform effort (DAMPER), SBIR phase 2

    NASA Technical Reports Server (NTRS)

    Blackburn, John; Smith, Dennis

    1992-01-01

    Applied Technology Associates, Inc., (ATA) has demonstrated that inertial actuation can be employed effectively in digital, active vibration isolation systems. Inertial actuation involves the use of momentum exchange to produce corrective forces which act directly on the payload being actively isolated. In a typical active vibration isolation system, accelerometers are used to measure the inertial motion of the payload. The signals from the accelerometers are then used to calculate the corrective forces required to counteract, or 'cancel out' the payload motion. Active vibration isolation is common technology, but the use of inertial actuation in such systems is novel, and is the focus of the DAMPER project. A May 1991 report was completed which documented the successful demonstration of inertial actuation, employed in the control of vibration in a single axis. In the 1 degree-of-freedom (1DOF) experiment a set of air bearing rails was used to suspend the payload, simulating a microgravity environment in a single horizontal axis. Digital Signal Processor (DSP) technology was used to calculate in real time, the control law between the accelerometer signals and the inertial actuators. The data obtained from this experiment verified that as much as 20 dB of rejection could be realized by this type of system. A discussion is included of recent tests performed in which vibrations were actively controlled in three axes simultaneously. In the three degree-of-freedom (3DOF) system, the air bearings were designed in such a way that the payload is free to rotate about the azimuth axis, as well as translate in the two horizontal directions. The actuator developed for the DAMPER project has applications beyond payload isolation, including structural damping and source vibration isolation. This report includes a brief discussion of these applications, as well as a commercialization plan for the actuator.

  8. Exploratory research on mutagenic activity of coal-related materials

    SciTech Connect

    Warshawsky, D.; Schoeny, R. S.

    1980-01-01

    The following samples were found to be mutagenic for strains TA1538, TA98 and TA100 Salmonella typhimurium: ETTM-10, ETTM-11, ETTM-15, ETTM-16, and ETTM-17. ETTM-13 was marginally mutagenic for TA1537. ETTM-14 was slightly mutagenic for TA1537, TA1538, and TA98. Mutagenicity by all samples was demonstrated only in the presence of hepatic enzyme extracts (S9) which provided metabolic activation. ETTM-11 was shown to be the most mutagenic sample assayed thus far; specific activity was 2.79 x 10/sup 4/ TA98 revertants/mg sample. Fractionation by serial extractions with increasingly polar organic solvents was done at least 2 x with ETTM-10, ETTM-11, ETTM-15, ETTM-16 and ETTM-17. For some samples highly mutagenic fractions were observed.

  9. Revised description of index of Florida water data collection active stations and a user's guide for station or site information retrieval computer program FINDEX H578

    USGS Publications Warehouse

    Geiger, Linda H.

    1983-01-01

    The report is an update of U.S. Geological Survey Open-File Report 77-703, which described a retrieval program for administrative index of active data-collection sites in Florida. Extensive changes to the Findex system have been made since 1977 , making the previous report obsolete. A description of the data base and computer programs that are available in the Findex system are documented in this report. This system serves a vital need in the administration of the many and diverse water-data collection activities. District offices with extensive data-collection activities will benefit from the documentation of the system. Largely descriptive, the report tells how a file of computer card images has been established which contains entries for all sites in Florida at which there is currently a water-data collection activity. Entries include information such as identification number, station name, location, type of site, county, frequency of data collection, funding, and other pertinent details. The computer program FINDEX selectively retrieves entries and lists them in a format suitable for publication. The index is updated routinely. (USGS)

  10. Innovative active control of gun barrels using smart materials

    NASA Astrophysics Data System (ADS)

    Mattice, Michael S.; LaVigna, Chris

    1997-06-01

    The accuracy of stabilized, turreted gun systems like the 120mm gun on the M1A2 Abrams tank and the 30mm gun on the Apache helicopter are limited by, among other things, structural flexure of the gun barrel and support structure. An advanced actuation system based on piezoelectric translators and an optical fiber strain sensing system are described in conjunction with a rapid prototyping workstation for the design of distributed parameter control systems to actively minimize the effects of vibrations caused by traversing rough terrain or weapon firing.

  11. Activation analysis of admixtures in certain semiconductive materials

    NASA Technical Reports Server (NTRS)

    Artyukhin, P. I.; Gilbert, E. P.; Pronin, V. A.

    1978-01-01

    The use of extractions and chromatographic operations to separate macrobases, and to divide elements into groups convenient for gamma-spectrometric analysis is discussed. Methods are described for the activation detection of some impurities in silicon, arsenic, thallium, and trichloromethylsilane, on the basis of the extraction properties of bis(2-chlorethyl ether) and dimethylbenzylalkylammonium chloride. A schematic diagram of the extraction separation of elements-admixture is presented showing the aqueous and organic phases. The content percentage of the various elements are given in tables.

  12. Photocatalytic degradation of sunscreen active ingredients mediated by nanostructured materials

    NASA Astrophysics Data System (ADS)

    Soto-Vazquez, Loraine

    Water scarcity and pollution are environmental issues with terrible consequences. In recent years several pharmaceutical and personal care products, such as sunscreen active ingredients, have been detected in different water matrices. Its recalcitrant behavior in the environment has caused controversies and generated countless questions about its safety. During this research, we employed an advanced oxidation process (photocatalysis) to degrade sunscreen active ingredients. For this study, we used a 3x3 system, evaluating three photocatalysts and three different contaminants. From the three catalysts employed, two of them were synthesized. ZnO nanoparticles were obtained using zinc acetate dihydrated as the precursor, and TiO2 nanowires were synthesized from titanium tetrachloride precursor. The third catalyst employed (namely, P25) was obtained commercially. The synthesized photocatalysts were characterized in terms of the morphology, elemental composition, crystalline structure, elemental oxidation states, vibrational modes and surface area, using SEM-EDS, XRD, XPS, Raman spectroscopy and BET measurements, respectively. The photocatalysts were employed during the study of the degradation of p-aminobenzoic acid, phenylbenzimidazole sulfonic acid, and benzophenone-4. In all the cases, at least 50% degradation was achieved. P25 showed degradation efficiencies above 90%, and from the nine systems, 7 of them degraded at least 86%.

  13. Supercritical adsorption testing of porous silicon, activated carbon, and zeolite materials

    NASA Astrophysics Data System (ADS)

    Harvey, Brendan

    The supercritical adsorption of methane gas on porous silicon, activated carbon, and zeolite materials was studied. An apparatus that utilizes the volumetric adsorption measurement technique was designed and constructed to conduct the experiments. Activated carbon materials consisted of Norit RX3 Extra, Zorflex FM30K woven activated carbon cloth, and Zorflex FM10 knitted activated carbon cloth. Zeolite materials consisted of 3A, 4A, 5A, and 13X zeolites. Porous silicon materials consisted of stain etched and electrochemically etched porous films, and stain etched porous powder. All adsorption tests were conducted at room temperature (approximately 298 K) and pressures up to approximately 5 MPa. Overall, the Norit RX3 Extra granulated activated carbon produced the highest excess adsorption and effective storage capacities. Effective storage and delivery capacities of 109 and 90 stpmlml were obtained at a pressure of 3.5 MPa and a temperature of approximately 298 K.

  14. Characterization of the airborne activity confinement system prefilter material

    SciTech Connect

    Long, T.A.; Monson, P.R.

    1992-05-01

    A general concern with assessing the effects of postulated severe accidents is predicting and preventing the release of radioactive isotopes to the environment at the Savannah River Site (SRS) reactor. Unless the confinement systems are breached in an accident the Airborne Activity Confinement System forces all of the internal air through the filter compartments. Proper modeling of the radioactivity released to the environment requires knowledge of the filtering characteristics of the demisters, the HEPA`s, and the charcoal beds. An investigation of the mass loading characteristics for a range of particle sizes was performed under the direction of Vince Novick of Argonne National Laboratory (ANL) for the Savannah River Technology Center (SRTC) in connection with the restart of the K reactor. Both solid and liquid aerosols were used to challenge sample prefilter and HEPA filters. The results of the ANL investigation are reported in this document.

  15. Characterization of the airborne activity confinement system prefilter material

    SciTech Connect

    Long, T.A.; Monson, P.R.

    1992-05-01

    A general concern with assessing the effects of postulated severe accidents is predicting and preventing the release of radioactive isotopes to the environment at the Savannah River Site (SRS) reactor. Unless the confinement systems are breached in an accident the Airborne Activity Confinement System forces all of the internal air through the filter compartments. Proper modeling of the radioactivity released to the environment requires knowledge of the filtering characteristics of the demisters, the HEPA's, and the charcoal beds. An investigation of the mass loading characteristics for a range of particle sizes was performed under the direction of Vince Novick of Argonne National Laboratory (ANL) for the Savannah River Technology Center (SRTC) in connection with the restart of the K reactor. Both solid and liquid aerosols were used to challenge sample prefilter and HEPA filters. The results of the ANL investigation are reported in this document.

  16. Active nondestructive assay of nuclear materials: principles and applications

    SciTech Connect

    Gozani, Tsahi

    1981-01-01

    The purpose of this book is to present, coherently and comprehensively, the wealth of available but scattered information on the principles and applications of active nondestructive analysis (ANDA). Chapters are devoted to the following: background and overview; interactions of neutrons with matter; interactions of ..gamma..-rays with matter; neutron production and sources; ..gamma..-ray production and sources; effects of neutron and ..gamma..-ray transport in bulk media; signatures of neutron- and photon-induced fissions; neutron and photon detection systems and electronics; representative ANDA systems; and instrument analysis, calibration, and measurement control for ANDA. Each chapter has an introductory section describing the relationship of the topic of that chapter to ANDA. Each chapter ends with a section that summarizes the main results and conclusions of the chapter, and a reference list.

  17. Poly(3-phenylthiophene) derivatives as active materials for electrochemical capacitors

    NASA Astrophysics Data System (ADS)

    Eissa, Mona M.

    Poly(3-(4-methylsulfonylphenyl)thiophenes) (PMSPT), (3-(4-cyanophenyl)-thiophene) (PCNPT), (3-(3,4-difluorophenyl)thiophene) (MPFPT), (3-(3,5difluorophenyl)thiophene) (MMFPT), and (3-(3-fluorophenyl)thiophene) (MFPT) polymers were prepared and electrochemically characterized in various organic electrolytes. The morphologies and electrochemical performance of the films were shown to depend on both the growth and cycling electrolytes. Constant current multicycle tests were performed on single cell devices using the type III capacitor configuration at high voltage (2.8-2.9 V) employing MPFPT, PCNPT, PMSPT and PFPT polymers. Energy and power densities of up to 50 Wh/kg and 5 kW/kg were achieved and excellent stabilities (up to 1200 n-doping/dedoping cycles) were demonstrated. Industrial practicum. The industrial practicum report on "Chemical Vapor Deposition of High Performance Polymeric Thin Films for Advanced Interconnect Applications" determined the copolymerization and characterization of four novel copolymers of Parylene-N by a CVD process at low temperature. These copolymers retain the advantages of the CVD process and also modify the properties of the Parylene homopolymer significantly such as lowering the dielectric constant from 2.65 to ˜2.0, increasing the thermal stability and enhancing the adhesion. Apprenticeship practicum. The study on "Synthesis, Characterization, and Catalytic Activity of The Zeolite Encapsulated Ruthenium hexadeca-fluorophthalocyanine Complexes" determined the catalytic activity of this fluorinated ruthenium phthalocyanine which was encapsulated in zeolite NaX during crystallization. Both the free complex RuFsb{16}Pc and the encapsulated (RuFsb{16}Pc-NaX) were found to be effective catalysts for the oxidation of cyclohexane with high efficiency and stability.

  18. Plate description of active deformation in the Africa (AF)-Arabia (AR)-Eurasia (EU) zone of plate interaction

    NASA Astrophysics Data System (ADS)

    Vernant, P.; McClusky, S.; Reilinger, R.

    2006-12-01

    We present the results of 17 years of GPS monitoring in this zone of plate interaction and show that to the resolution of our observations (i.e., ~1-2 mm/yr; ~ ±10 % of relative plate motions), deformation is consistent with plate-block models with relative motion between adjacent plates/blocks accommodated by elastic strain accumulation. Relative plate motions are consistent with geologically recent (~ 3 Ma) plate motions where geologic estimates of relative plate motion have been determined (AR- Nubia: Red Sea; AR-Somalia: Gulf of Aden; AF-EU; AR-EU). Furthermore, fault slip rates derived from the GPS block motions are mostly equal to geologic slip rates determined for long enough time intervals to average out earthquake cycle effects. We conclude that a plate description (i.e., relative Euler vectors) is appropriate to describe the kinematics of continental deformation during the past few Myr in this zone of plate interaction.

  19. THERMAL IMAGING OF ACTIVE MAGNETIC REGERNERATOR MCE MATERIALS DURING OPERATION

    SciTech Connect

    Shassere, Benjamin; West, David L; Abdelaziz, Omar; Evans III, Boyd Mccutchen

    2012-01-01

    An active magnetic regenerator (AMR) prototype was constructed that incorporates a Gd sheet into the regenerator wall to enable visualization of the system s thermal transients. In this experiment, the thermal conditions inside the AMR are observed under a variety of operating conditions. An infrared (IR) camera is employed to visualize the thermal transients within the AMR. The IR camera is used to visually and quantitatively evaluate the temperature difference and thus giving means to calculate the performance of the system under the various operating conditions. Thermal imaging results are presented for two differing experimental test runs. Real time imaging of the thermal state of the AMR has been conducted while operating the system over a range of conditions. A 1 Tesla twin-coil electromagnet (situated on a C frame base) is used for this experiment such that all components are stationary during testing. A modular, linear reciprocating system has been realized in which the effects of regenerator porosity and utilization factor can be investigated. To evaluate the performance variation in porosity and utilization factor the AMR housing was constructed such that the plate spacing of the Gd sheets may be varied. Each Gd sheet has dimensions of 38 mm wide and 66 mm long with a thickness of 1 mm and the regenerator can hold a maximum of 29 plates with a spacing of 0.25 mm. Quantitative and thermal imaging results are presented for several regenerator configurations.

  20. Active smart material system for buffet load alleviation

    NASA Astrophysics Data System (ADS)

    Lazarus, Kenneth B.; Saarmaa, Erik; Agnes, Gregory S.

    1995-05-01

    This paper addressed the feasibility of using an active piezoelectric buffet suppression system to reduce buffet vibrations in vertical tail aircraft. During the assessment, functional requirements were defined, models were developed, and full-scale piezoelectric buffet suppression systems were designed and evaluated. A variety of actuator distributions, sensor locations and controller architectures were examined and it was found that significant performance improvements could be achieved (greater than 70 percent) with minimal weight penalties (less than 8 percent). This work enabled the evaluation of issues such as system performance versus added weight and piezoelectric actuator control authority and power requirements. The study showed that the added performance benefit (in terms of vibration reduction and fatigue life) are far greater than the weight penalty, and that piezoelectric actuators have the control authority required to suppress high energy buffet forces within aircraft geometry, weight, and power constraints. Further, the high performance achieved (much greater than that defined in the functional requirements) suggests that systems can be designed with a much lower weight penalty (1/2 to 1/4) than that assumed in this study.

  1. Active control of acoustic pressure fields using smart material technologies

    NASA Technical Reports Server (NTRS)

    Banks, H. T.; Smith, R. C.

    1993-01-01

    An overview describing the use of piezoceramic patches in reducing noise in a structural acoustics setting is presented. The passive and active contributions due to patches which are bonded to an Euler-Bernoulli beam or thin shell are briefly discussed and the results are incorporated into a 2-D structural acoustics model. In this model, an exterior noise source causes structural vibrations which in turn lead to interior noise as a result of nonlinear fluid/structure coupling mechanism. Interior sound pressure levels are reduced via patches bonded to the flexible boundary (a beam in this case) which generate pure bending moments when an out-of-phase voltage is applied. Well-posedness results for the infinite dimensional system are discussed and a Galerkin scheme for approximating the system dynamics is outlined. Control is implemented by using linear quadratic regulator (LQR) optimal control theory to calculate gains for the linearized system and then feeding these gains back into the nonlinear system of interest. The effectiveness of this strategy for this problem is illustrated in an example.

  2. A description of the index of active Florida water data collection stations and a user's guide for station or site information retrieval using computer program Findex H578

    USGS Publications Warehouse

    Merritt, M.L.

    1977-01-01

    A computerized index of water-data collection activities and retrieval software to generate publication list of this information was developed for Florida. This system serves a vital need in the administration of the many and diverse water-data collection activities. Previously, needed data was very difficult to assemble for use in program planning or project implementation. Largely descriptive, the report tells how a file of computer card images has been established which contains entries for all sites in Florida at which there is currently a water-data-collection activity. Entries include information such as identification number, station name, location, type of site, county, information about data collection, funding, and other pertinent details. The computer program FINDEX selectively retrieves entries and lists them in a format suitable for publication. Updating the index is done routinely. (Woodard-USGS)

  3. Re-description of Echiniscus cavagnaroi Schuster & Grigarick, 1966 (Tardigrada: Heterotardigrada: Echiniscoidea: Echiniscidae) from type material, with new records from Hawaii and Bermuda.

    PubMed

    Meyer, Harry A

    2016-06-13

    The description of Echiniscus cavagnaroi Schuster & Grigarick, 1966 (Tardigrada: Heterotardigrada: Echiniscoidea: Echiniscidae) is emended with new morphometric measurements of the holotype and eleven paratypes. The length of Cirrus A in the holotype (25.2 μm) was only half the 50 μm reported in the original description. Moreover, the largest values for Cirrus A length and Cirrus A to body length ratio for any specimen (40.6 μm, 21%) were also lower than in the original description. Variation in the presence or absence of spines was considerably greater than originally described. Spines C, Dd and E were not present on all specimens (C present in 67%, Dd in 67%, E in 50%). The length of spines Dd and E, when present, varied greatly among specimens. The geographical range of E. cavagnaroi is expanded by new records from the Hawaiian Islands and Bermuda. The species has been reported from southern China; however, the published description of these specimens differs markedly from type specimens in several respects. The presence of E. cavagnaroi sensu stricto in China needs to be confirmed. The high variability in presence or absence and length of spines in Echiniscus cavagnaroi underscores the importance of assessing variability in these characteristics when identifying unknown specimens or describing new species in the genus. This requires using as many specimens as possible and fully reporting variability.

  4. Re-description of Echiniscus cavagnaroi Schuster & Grigarick, 1966 (Tardigrada: Heterotardigrada: Echiniscoidea: Echiniscidae) from type material, with new records from Hawaii and Bermuda.

    PubMed

    Meyer, Harry A

    2016-01-01

    The description of Echiniscus cavagnaroi Schuster & Grigarick, 1966 (Tardigrada: Heterotardigrada: Echiniscoidea: Echiniscidae) is emended with new morphometric measurements of the holotype and eleven paratypes. The length of Cirrus A in the holotype (25.2 μm) was only half the 50 μm reported in the original description. Moreover, the largest values for Cirrus A length and Cirrus A to body length ratio for any specimen (40.6 μm, 21%) were also lower than in the original description. Variation in the presence or absence of spines was considerably greater than originally described. Spines C, Dd and E were not present on all specimens (C present in 67%, Dd in 67%, E in 50%). The length of spines Dd and E, when present, varied greatly among specimens. The geographical range of E. cavagnaroi is expanded by new records from the Hawaiian Islands and Bermuda. The species has been reported from southern China; however, the published description of these specimens differs markedly from type specimens in several respects. The presence of E. cavagnaroi sensu stricto in China needs to be confirmed. The high variability in presence or absence and length of spines in Echiniscus cavagnaroi underscores the importance of assessing variability in these characteristics when identifying unknown specimens or describing new species in the genus. This requires using as many specimens as possible and fully reporting variability. PMID:27395245

  5. Spacelab J experiment descriptions

    SciTech Connect

    Miller, T.Y.

    1993-08-01

    Brief descriptions of the experiment investigations for the Spacelab J Mission which was launched from the Kennedy Space Center aboard the Endeavour in Sept. 1992 are presented. Experiments cover the following: semiconductor crystals; single crystals; superconducting composite materials; crystal growth; bubble behavior in weightlessness; microgravity environment; health monitoring of Payload Specialists; cultured plant cells; effect of low gravity on calcium metabolism and bone formation; and circadian rhythm. Separate abstracts have been prepared for articles from this report.

  6. Spacelab J experiment descriptions

    NASA Technical Reports Server (NTRS)

    Miller, Teresa Y. (Editor)

    1993-01-01

    Brief descriptions of the experiment investigations for the Spacelab J Mission which was launched from the Kennedy Space Center aboard the Endeavour in Sept. 1992 are presented. Experiments cover the following: semiconductor crystals; single crystals; superconducting composite materials; crystal growth; bubble behavior in weightlessness; microgravity environment; health monitoring of Payload Specialists; cultured plant cells; effect of low gravity on calcium metabolism and bone formation; and circadian rhythm.

  7. Micro- and Nanostructured Materials for Active Devices and Molecular Electronics

    SciTech Connect

    Martin, Peter M.; Graff, Gordon L.; Gross, Mark E.; Burrows, Paul E.; Bennett, Wendy D.; Mast, Eric S.; Hall, Michael G.; Bonham, Charles C.; Zumhoff, Mac R.; Williford, Rick E.

    2003-10-01

    Traditional single layer barrier coatings are not adequate in preventing degradation of the performance of organic molecular electronic and other active devices. Most advanced devices used in display technology now consist of micro and nanostructured small molecule, polymer and inorganic coatings with thin high reactive group 1A metals. This includes organic electronics such as organic light emitting devices (OLED). The lifetimes of these devices rapidly degrades when they are exposed to atmospheric oxygen and water vapor. Thin film photovoltaics and batteries are also susceptible to degradation by moisture and oxygen. Using in-line coating techniques we apply a composite nanostructured inorganic/polymer thin film barrier that restricts moisture and oxygen permeation to undetectable levels using conventional permeation test equipment. We describe permeation mechanisms for this encapsulation coating and flat panel display and other device applications. Permeation through the multilayer barrier coating is defect and pore limited and can be described by Knudsen diffusion involving a long and tortuous path. Device lifetime is also enhanced by the long lag times required to reach the steady state flux regime. Permeation rates in the range of 10-6 cc,g/m2/d have been achieved and OLED device lifetimes. The structure is robust, yet flexible. The resulting device performance and lifetimes will also be described. The barrier film can be capped with a thin film of transparent conductive oxide yielding an engineered nanostructured device for next generation, rugged, lightweight or flexible displays. This enables, for the first time, thin film encapsulation of emissive organic displays.

  8. Progress Report {number_sign}1 on the materials identification, characterization and evaluation activity: Acquisition of materials data from the Exploratory Studies Facility

    SciTech Connect

    Meike, A., LLNL

    1998-02-01

    This paper reports on the initial work within the Materials Identification, Characterization and Evaluation Sub-activity Integration Activity within the Introduced Materials Task (IMT) (WBS 1.2.3.12.5). The goals of this activity are twofold.: (1) to identify and characterize types and usage of materials that are most likely to be introduced into a potential High Level Radioactive Waste (HLW) repository at Yucca Mountain, Nevada, as a result of its construction and operation and (2) to provide tools for the Integration Activity to evaluate the chemical impact on the repository based on information gathered from sources external and internal to the Introduced Materials Task-by the Literature Survey Sub-activity (Integration Activity, IMT). Based on this information and assessment, the Integration Activity activates relevant activities within the Introduced Materials Task and provides information to other Tasks within the Yucca Mountain Project.

  9. Micromechanics and constitutive models for soft active materials with phase evolution

    NASA Astrophysics Data System (ADS)

    Wang, Binglian

    Soft active materials, such as shape memory polymers, liquid crystal elastomers, soft tissues, gels etc., are materials that can deform largely in response to external stimuli. Micromechanics analysis of heterogeneous materials based on finite element method is a typically numerical way to study the thermal-mechanical behaviors of soft active materials with phase evolution. While the constitutive models that can precisely describe the stress and strain fields of materials in the process of phase evolution can not be found in the databases of some commercial finite element analysis (FEA) tools such as ANSYS or Abaqus, even the specific constitutive behavior for each individual phase either the new formed one or the original one has already been well-known. So developing a computationally efficient and general three dimensional (3D) thermal-mechanical constitutive model for soft active materials with phase evolution which can be implemented into FEA is eagerly demanded. This paper first solved this problem theoretically by recording the deformation history of each individual phase in the phase evolution process, and adopted the idea of effectiveness by regarding all the new formed phase as an effective phase with an effective deformation to make this theory computationally efficient. A user material subroutine (UMAT) code based on this theoretical constitutive model has been finished in this work which can be added into the material database in Abaqus or ANSYS and can be easily used for most soft active materials with phase evolution. Model validation also has been done through comparison between micromechanical FEA and experiments on a particular composite material, shape memory elastomeric composite (SMEC) which consisted of an elastomeric matrix and the crystallizable fibre. Results show that the micromechanics and the constitutive models developed in this paper for soft active materials with phase evolution are completely relied on.

  10. Oil-containing waste water treating material consisting of modified active carbon

    SciTech Connect

    Sato, H.; Shigeta, S.; Takenaka, Y.

    1982-03-16

    An oil-containing waste water treating material comprises an active carbon upon whose surface is chemically bonded at least one nitrogenous compound which is an amine or a quaternarized derivative thereof.

  11. Activity limitations and participation restrictions in women with hand osteoarthritis: patients' descriptions and associations between dimensions of functioning

    PubMed Central

    Kjeken, I; Dagfinrud, H; Slatkowsky-Christ..., B; Mowinckel, P; Uhlig, T; Kvien, T; Finset, A

    2005-01-01

    Objective: To describe the functional consequences of hand osteoarthritis, and analyse associations between personal factors, hand impairment, activity limitations, and participation restrictions within the framework of the International Classification of Functioning (ICF). Methods: 87 women with hand osteoarthritis completed a clinical examination including recording of sociodemographic data, measures of hand impairment, and completion of self reported health status measures. The function subscale of the AUSCAN Osteoarthritis Hand Index was used as a measure of hand related activity limitations, while the Canadian Occupational Performance Measure (COPM) was used to describe and measure activity limitations and participation restrictions as perceived by the individual. The study variables were categorised using the dimensions in the ICF framework and analysed using bivariate and multivariate statistical approaches. Results: The patients described problems in many domains of activity and participation. The most frequently described hand related problems were activities requiring considerable grip strength combined with twisting of the hands. On the impairment level, the patients had reduced grip force and joint mobility in the hands, and resisted motion was painful. Regression analyses showed that hand related activity limitations were associated with measures of hand impairment, while activity and participation (as measured by the COPM) were more strongly associated with personal factors than with hand impairment. Conclusions: Hand osteoarthritis has important functional consequences in terms of pain, reduced hand mobility and grip force, activity limitations, and participation restrictions. Rehabilitation programmes should therefore be multidisciplinary and multidimensional, focusing on hand function, occupational performance, and coping strategies. PMID:15829571

  12. "Go Be a Writer": Intra-Activity with Materials, Time and Space in Literacy Learning

    ERIC Educational Resources Information Center

    Kuby, Candace R.; Rucker, Tara Gutshall; Kirchhofer, Jessica M.

    2015-01-01

    This article is based on research in a United States second-grade classroom during a multimodal literacy workshop. Observing students working with tissue paper, foam board, string, pipe cleaners and other materials, we asked how is intra-activity with materials, time and space influencing literacy learning in Room 203? While the research…

  13. Quantum dots as active material for quantum cascade lasers: comparison to quantum wells

    NASA Astrophysics Data System (ADS)

    Michael, Stephan; Chow, Weng W.; Schneider, Hans Christian

    2016-03-01

    We review a microscopic laser theory for quantum dots as active material for quantum cascade lasers, in which carrier collisions are treated at the level of quantum kinetic equations. The computed characteristics of such a quantum-dot active material are compared to a state-of-the-art quantum-well quantum cascade laser. We find that the current requirement to achieve a comparable gain-length product is reduced compared to that of the quantum-well quantum cascade laser.

  14. Rattling Nucleons: New Developments in Active Interrogation of Special Nuclear Material

    SciTech Connect

    Robert C. Runkle; David L. Chichester; Scott J. Thompson

    2012-01-01

    Active interrogation is a vigorous area of research and development due to its promise of offering detection and characterization capabilities of special nuclear material in environments where passive detection fails. The primary value added by active methods is the capability to penetrate shielding - special nuclear material itself, incidental materials, or intentional shielding - and advocates hope that active interrogation will provide a solution to the problem of detecting shielded uranium, which is at present the greatest obstacle to interdiction efforts. The technique also provides a unique benefit for quantifying nuclear material in high background-radiation environments, an area important for nuclear material safeguards and material accountancy. Progress has been made in the field of active interrogation on several fronts, most notably in the arenas of source development, systems integration, and the integration and exploitation of multiple fission and non-fission signatures. But penetration of interrogating radiation often comes at a cost, not only in terms of finance and dose but also in terms of induced backgrounds, system complexity, and extended measurement times (including set up and acquisition). These costs make the calculus for deciding to implement active interrogation more subtle than may be apparent. The purpose of this review is thus to examine existing interrogation methods, compare and contrast their attributes and limitations, and identify missions where active interrogation may hold the most promise.

  15. Efficiency of biological activator formulated material (BAFM) for volatile organic compounds removal--preliminary batch culture tests with activated sludge.

    PubMed

    Corre, Charline; Couriol, Catherine; Amrane, Abdeltif; Dumont, Eric; Andrès, Yves; Le Cloirec, Pierre

    2012-01-01

    During biological degradation, such as biofiltration of air loaded with volatile organic compounds, the pollutant is passed through a bed packed with a solid medium acting as a biofilm support. To improve microorganism nutritional equilibrium and hence to enhance the purification capacities, a Biological Activator Formulated Material (BAFM) was developed, which is a mixture of solid nutrients dissolving slowly in a liquid phase. This solid was previously validated on mineral pollutants: ammonia and hydrogen sulphide. To evaluate the efficiency of such a material for biodegradation of some organic compounds, a simple experiment using an activated sludge batch reactor was carried out. The pollutants (sodium benzoate, phenol, p-nitrophenol and 2-4-dichlorophenol) were in the concentration range 100 to 1200 mg L(-1). The positive impact of the formulated material was shown. The improvement of the degradation rates was in the range 10-30%. This was the consequence of the low dissolution of the nutrients incorporated during material formulation, followed by their consumption by the biomass, as shown for urea used as a nitrogen source. Owing to its twofold interest (mechanical resistance and nutritional supplementation), the Biological Activator Formulated Material seems to be a promising material. Its addition to organic or inorganic supports should be investigated to confirm its relevance for implementation in biofilters. PMID:22988627

  16. Electrode-active material for electrochemical batteries and method of preparation

    DOEpatents

    Varma, Ravi

    1987-01-01

    A battery electrode material comprising a non-stoichiometric electrode-active material which forms a redox pair with the battery electrolyte, an electrically conductive polymer present in the range of from about 2% by weight to about 5% by weight of the electrode-active material, and a binder. The conductive polymer provides improved proton or ion conductivity and is a ligand resulting in metal ion or negative ion vacancies of less than about 0.1 atom percent. Specific electrodes of nickel and lead are disclosed.

  17. Electrode-active material for electrochemical batteries and method of preparation

    DOEpatents

    Varma, R.

    1983-11-07

    A battery electrode material comprises a non-stoichiometric electrode-active material which forms a redox pair with the battery electrolyte, an electrically conductive polymer present in the range of from about 2% by weight to about 5% by weight of the electrode-active material, and a binder. The conductive polymer provides improved proton or ion conductivity and is a ligand resulting in metal ion or negative ion vacancies of less than about 0.1 atom percent. Specific electrodes of nickel and lead are disclosed.

  18. Descriptive thermodynamics

    NASA Astrophysics Data System (ADS)

    Ford, David; Huntsman, Steven

    2006-06-01

    Thermodynamics (in concert with its sister discipline, statistical physics) can be regarded as a data reduction scheme based on partitioning a total system into a subsystem and a bath that weakly interact with each other. Whereas conventionally, the systems investigated require this form of data reduction in order to facilitate prediction, a different problem also occurs, in the context of communication networks, markets, etc. Such “empirically accessible” systems typically overwhelm observers with the sort of information that in the case of (say) a gas is effectively unobtainable. What is required for such complex interacting systems is not prediction (this may be impossible when humans besides the observer are responsible for the interactions) but rather, description as a route to understanding. Still, the need for a thermodynamical data reduction scheme remains. In this paper, we show how an empirical temperature can be computed for finite, empirically accessible systems, and further outline how this construction allows the age-old science of thermodynamics to be fruitfully applied to them.

  19. The antioxidative activity of plant extracts in cooked pork patties as evaluated by descriptive sensory profiling and chemical analysis.

    PubMed

    Nissen, Lise R; Byrne, Derek V; Bertelsen, Grete; Skibsted, Leif H

    2004-11-01

    Antioxidative efficiency of extracts of rosemary, green tea, coffee and grape skin in precooked pork patties was investigated during storage under retail conditions (10 days, 4 °C, atmospheric air), using descriptive sensory profiling following reheating and quantitative measurements of hexanal, thiobarbituric acid reactive substances (TBARS) and vitamin E as indicators of lipid oxidation. The initial oxidative status of pork patties (evaluated by ANOVA) showed a significant lower level of secondary oxidation products and higher levels of vitamin E in patties with extracts incorporated, indicating that the extracts retarded lipid oxidation during processing of the meat. Data analysis for the storage study was based on qualitative overview of sensory/chemical variation by principal component analysis (PCA) and quantitative ANOVA-PLSR for determination of the relationship between design variables (days of chill-storage, extract treatment) versus sensory-chemical variables and PLSR for elucidating the predictive ability of the chemical methods for sensory terms. Lipid oxidation was seen to involve a decrease in perception of meat flavour/odour and a concomitant increase in the off-flavour/odours linseed, rancid. TBARS, hexanal and vitamin E were all significant predictive indices (P<0.05) for the majority of the sensory terms, while vitamin E through negative correlation with TBARS and hexanal displayed its antioxidative effect and thus, its ability to preserve sensory fresh meat flavour/odour. The effect of the various extracts incorporated in the product was clearly related to the degree of lipid oxidation and an overall ranking of the antioxidative efficiency of extracts in declining order became apparent: Rosemary>Grape skin>Tea>Coffee>Reference. Furthermore, the relation between extracts and vitamin E indicated that the extracts, to some extent, interacted with the vitamin and prevented it from degrading. In conclusion, the rosemary extract displayed potential

  20. Determination of contamination in rare earth materials by promptgamma activation analysis (PGAA)

    SciTech Connect

    Perry, D.L.; English, G.A.; Firestone, R.B.; Molnar, G.L.; Revay,Zs.

    2004-11-09

    Prompt gamma activation analysis (PGAA) has been used to detect and quantify impurities in the analyses of rare earth (RE) oxides. The analytical results are discussed with respect to the importance of having a thorough identification and understanding of contaminant elements in these compounds regarding the function of the materials in their various applications. Also, the importance of using PGAA to analyze materials in support of other physico-chemical studies of the materials is discussed, including the study of extremely low concentrations of ions such as the rare earth ions themselves in bulk material matrices.

  1. Status of R&D activities on materials for fusion power reactors

    NASA Astrophysics Data System (ADS)

    Baluc, N.; Abe, K.; Boutard, J. L.; Chernov, V. M.; Diegele, E.; Jitsukawa, S.; Kimura, A.; Klueh, R. L.; Kohyama, A.; Kurtz, R. J.; Lässer, R.; Matsui, H.; Möslang, A.; Muroga, T.; Odette, G. R.; Tran, M. Q.; van der Schaaf, B.; Wu, Y.; Yu, J.; Zinkle, S. J.

    2007-10-01

    Current R&D activities on materials for fusion power reactors are mainly focused on plasma facing, structural and tritium breeding materials for plasma facing (first wall, divertor) and breeding blanket components. Most of these activities are being performed in Europe, Japan, the People's Republic of China, Russia and the USA. They relate to the development of new high temperature, radiation resistant materials, the development of coatings that will act as erosion, corrosion, permeation and/or electrical/MHD barriers, characterization of candidate materials in terms of mechanical and physical properties, assessment of irradiation effects, compatibility experiments, development of reliable joints, and development and/or validation of design rules. Priorities defined worldwide in the field of materials for fusion power reactors are summarized, as well as the main achievements obtained during the last few years and the near-term perspectives in the different investigation areas.

  2. The dissolution mechanism of cathodic active materials of spent Zn-Mn batteries in HCl.

    PubMed

    Li, Yunqing; Xi, Guoxi

    2005-12-01

    The cathodic active materials of spent Zn-Mn batteries are complicated. The majority materials that they contain are Mn(OH)(2), Mn(2)O(4), lambda-Mn(2)O(2), ZnMn(2)O(4), Zn(NH(3))(2)Cl(2), [Zn(OH)(2)](4).ZnCl(2), etc. Dissolving these kinds of materials is important to the environmental pollution control and materials recycle. In present paper we investigated the dissolution mechanism of the cathodic active materials in HCl by testing the factors that can influence the dissolution procedure, including temperature, time, and the concentration of HCl and H(2)O(2). Our results showed that both neutralization and oxidation-reduction reactions occurred in the dissolution process, and that H(2)O(2) had a great effect on the dissolution efficiency.

  3. IFMIF - International Fusion Materials Irradiation Facility Conceptual Design Activity/Interim Report

    SciTech Connect

    Rennich, M.J.

    1995-12-01

    Environmental acceptability, safety, and economic viability win ultimately be the keys to the widespread introduction of fusion power. This will entail the development of radiation- resistant and low- activation materials. These low-activation materials must also survive exposure to damage from neutrons having an energy spectrum peaked near 14 MeV with annual radiation doses in the range of 20 displacements per atom (dpa). Testing of candidate materials, therefore, requires a high-flux source of high energy neutrons. The problem is that there is currently no high-flux source of neutrons in the energy range above a few MeV. The goal, is therefore, to provide an irradiation facility for use by fusion material scientists in the search for low-activation and damage-resistant materials. An accellerator-based neutron source has been established through a number of international studies and workshops` as an essential step for materials development and testing. The mission of the International Fusion Materials Irradiation Facility (IFMIF) is to provide an accelerator-based, deuterium-lithium (D-Li) neutron source to produce high energy neutrons at sufficient intensity and irradiation volume to test samples of candidate materials up to about a full lifetime of anticipated use in fusion energy reactors. would also provide calibration and validation of data from fission reactor and other accelerator-based irradiation tests. It would generate material- specific activation and radiological properties data, and support the analysis of materials for use in safety, maintenance, recycling, decommissioning, and waste disposal systems.

  4. Pathways to Provenance: "DACS" and Creator Descriptions

    ERIC Educational Resources Information Center

    Weimer, Larry

    2007-01-01

    "Describing Archives: A Content Standard" breaks important ground for American archivists in its distinction between creator descriptions and archival material descriptions. Implementations of creator descriptions, many using Encoded Archival Context (EAC), are found internationally. "DACS"'s optional approach of describing creators in authority…

  5. Performance of Nonmigratory Iron Chelating Active Packaging Materials in Viscous Model Food Systems.

    PubMed

    Roman, Maxine J; Decker, Eric A; Goddard, Julie M

    2015-09-01

    Many packaged food products undergo quality deterioration due to iron promoted oxidative reactions. Recently, we have developed a nonmigratory iron chelating active packaging material that represents a novel approach to inhibit oxidation of foods while addressing consumer demands for "cleanˮ labels. A challenge to the field of nonmigratory active packaging is ensuring that surface-immobilized active agents retain activity in a true food system despite diffusional limitations. Yet, the relationship between food viscosity and nonmigratory active packaging activity retention has never been characterized. The objective of this study was to investigate the influence of food viscosity on iron chelation by a nonmigratory iron chelating active packaging material. Methyl cellulose was added to aqueous buffered iron solutions to yield model systems with viscosities ranging from ∼1 to ∼10(5)  mPa·s, representing viscosities ranging from beverage to mayonnaise. Iron chelation was quantified by material-bound iron content using colorimetry and inductively coupled plasma-optical emission spectrometry (ICP-OES).  Maximum iron chelation was reached in solutions up to viscosity ∼10(2)  mPa·s. In more viscous solutions (up to ∼10(4)  mPa·s), there was a significant decrease in iron chelating capacity (P < 0.05). However, materials still retained at least 76% iron chelating capacity. Additionally, the influence of different food hydrocolloids on the performance of nonmigratory iron chelating active packaging was characterized. Methyl cellulose and carrageenan did not compete with the material for specific iron chelation (P > 0.05). Materials retained 32% to 45% chelating capacity when in contact with competitively chelating hydrocolloids guar gum, locust bean gum, and xanthan gum. This work demonstrates the potential application of nonmigratory iron chelating active packaging in liquid and semi-liquid foods to allow for the removal of synthetic chelators, while

  6. Performance of Nonmigratory Iron Chelating Active Packaging Materials in Viscous Model Food Systems.

    PubMed

    Roman, Maxine J; Decker, Eric A; Goddard, Julie M

    2015-09-01

    Many packaged food products undergo quality deterioration due to iron promoted oxidative reactions. Recently, we have developed a nonmigratory iron chelating active packaging material that represents a novel approach to inhibit oxidation of foods while addressing consumer demands for "cleanˮ labels. A challenge to the field of nonmigratory active packaging is ensuring that surface-immobilized active agents retain activity in a true food system despite diffusional limitations. Yet, the relationship between food viscosity and nonmigratory active packaging activity retention has never been characterized. The objective of this study was to investigate the influence of food viscosity on iron chelation by a nonmigratory iron chelating active packaging material. Methyl cellulose was added to aqueous buffered iron solutions to yield model systems with viscosities ranging from ∼1 to ∼10(5)  mPa·s, representing viscosities ranging from beverage to mayonnaise. Iron chelation was quantified by material-bound iron content using colorimetry and inductively coupled plasma-optical emission spectrometry (ICP-OES).  Maximum iron chelation was reached in solutions up to viscosity ∼10(2)  mPa·s. In more viscous solutions (up to ∼10(4)  mPa·s), there was a significant decrease in iron chelating capacity (P < 0.05). However, materials still retained at least 76% iron chelating capacity. Additionally, the influence of different food hydrocolloids on the performance of nonmigratory iron chelating active packaging was characterized. Methyl cellulose and carrageenan did not compete with the material for specific iron chelation (P > 0.05). Materials retained 32% to 45% chelating capacity when in contact with competitively chelating hydrocolloids guar gum, locust bean gum, and xanthan gum. This work demonstrates the potential application of nonmigratory iron chelating active packaging in liquid and semi-liquid foods to allow for the removal of synthetic chelators, while

  7. How Do Distance Learners Use Activities in Self-Instructional Materials?

    ERIC Educational Resources Information Center

    Mishra, Sanjaya; Gaba, Ashok Kumar

    2001-01-01

    Presents results of a study on the use of learning activities in self-instructional materials by distance learners of the Indira Gandhi National Open University (IGNOU). It shows that learners make use of the activities extensively as they have positive perceptions about benefits of Self-Assessment Questions and Terminal Questions given in the…

  8. Toward a Descriptive Science of Teaching: How the TDOP Illuminates the Multidimensional Nature of Active Learning in Postsecondary Classrooms

    ERIC Educational Resources Information Center

    Hora, Matthew T.

    2015-01-01

    Detailed accounts of teaching can shed light on the nature and prevalence of active learning, yet common approaches reduce teaching to unidimensional descriptors or binary categorizations. In this paper, I use the instructional systems-of-practice framework and the Teaching Dimensions Observation Protocol (TDOP) to advance an approach to thinking…

  9. Real space mapping of ionic diffusion and electrochemical activity in energy storage and conversion materials

    SciTech Connect

    Kalinin, Sergei V; Balke, Nina; Kumar, Amit; Dudney, Nancy J; Jesse, Stephen

    2014-05-06

    A method and system for probing mobile ion diffusivity and electrochemical reactivity on a nanometer length scale of a free electrochemically active surface includes a control module that biases the surface of the material. An electrical excitation signal is applied to the material and induces the movement of mobile ions. An SPM probe in contact with the surface of the material detects the displacement of mobile ions at the surface of the material. A detector measures an electromechanical strain response at the surface of the material based on the movement and reactions of the mobile ions. The use of an SPM tip to detect local deformations allows highly reproducible measurements in an ambient environment without visible changes in surface structure. The measurements illustrate effective spatial resolution comparable with defect spacing and well below characteristic grain sizes of the material.

  10. Enhanced Immunostimulating Activity of Lactobacilli-Mimicking Materials by Controlling Size.

    PubMed

    Nagahama, Koji; Kumano, Takayuki; Nakagawa, Yuichi; Oyama, Naho; Tsuji, Hirokazu; Moriyama, Kaoru; Shida, Kan; Nomoto, Koji; Chiba, Katsuyoshi; Koumoto, Kazuya; Matsui, Jun

    2015-08-19

    The design and synthesis of materials capable of activating the immune system in a safe manner is of great interest in immunology and related fields. Lactobacilli activate the innate immune system of a host when acting as probiotics. Here, we constructed lactobacilli-mimicking materials in which polysaccharide-peptidoglycan complexes (PS-PGs) derived from lactobacilli were covalently conjugated to the surfaces of polymeric microparticles with a wide variety of sizes, ranging from 200 nm to 3 μm. The artificial lactobacilli successfully stimulated macrophages without cytotoxicity. Importantly, we found that the size of artificial lactobacilli strongly influenced their immunostimulating activities, and that artificial lactobacilli of 1 μm exhibited 10-fold higher activity than natural lactobacilli. One major advantage of the artificial lactobacilli is facile control of size, which cannot be changed in natural lactobacilli. These findings provide new insights into the design of materials for immunology as well as the molecular biology of lactobacillus.

  11. Material Activation Benchmark Experiments at the NuMI Hadron Absorber Hall in Fermilab

    SciTech Connect

    Matsumura, H.; Matsuda, N.; Kasugai, Y.; Toyoda, A.; Yashima, H.; Sekimoto, S.; Iwase, H.; Oishi, K.; Sakamoto, Y.; Nakashima, H.; Leveling, A.; Boehnlein, D.; Lauten, G.; Mokhov, N.; Vaziri, K.

    2014-06-15

    In our previous study, double and mirror symmetric activation peaks found for Al and Au arranged spatially on the back of the Hadron absorber of the NuMI beamline in Fermilab were considerably higher than those expected purely from muon-induced reactions. From material activation bench-mark experiments, we conclude that this activation is due to hadrons with energy greater than 3 GeV that had passed downstream through small gaps in the hadron absorber.

  12. Loading and utilization of active material in nickel composite electrodes: optimization

    SciTech Connect

    Lee, W.W.; Ferrando, W.A.; Sutula, R.A.

    1984-12-01

    As an attempt to reduce nickel battery weight, the nickel composite electrode, has been under development. Investigations were undertaken to determine the optimum conditions for loading and utilizing nickel hydroxide active material in nickel composite electrodes. The main emphasis was placed on the improvement of both loading efficiency by electrochemical impregnation and utilization efficiency of the Ni(OH)2 active material. The efficiencies were examined as functions of such electrochemical conditions as current density, nickel concentration, pH, temperature of the impregnating bath, the continuity of current flow and manner of adding Co(OH)S additive. Also studied was the loading efficiency of chemical impregnation (polarization method) and the suspension method which enables a direct loading of externally prepared active material into the composite body. The most important factor for a quick utilization of the active material was found to be the additive distribution. A model of the additive distribution in the active material is proposed to account for different patterns of utilization exhibited by the electrodes.

  13. [Study nurses in Germany--a survey of job-related activities in clinical trials as a basis for a job description and for training curricula].

    PubMed

    Fisk, Bettina; Beier, Jutta

    2007-10-01

    Until now, the conducting of clinical trials by nurses has scarcely come under scientific examination. Particularly in Germany, the field of activity has only been treated marginally in the health-care and nursing sciences. In Germany, the term 'Study Nurse' is used not only for members of the nursing profession but across disciplines; it is one of the most widely used terms. An explorative, descriptive study has been conducted employing a modified version of the Work Sampling Method. 79 Study Nurses were anonymously surveyed using a self-administered workload catalogue. 85 participated in the survey that focused on demographics, qualifications, and salary. In every workload catalogue, contact with other colleagues as well as job activities and the time spent on each activity were documented over twenty days. Study Nurses are mostly members of the nursing profession. They work mostly at university clinics and are responsible for conducting clinical trials. This applies to all trials that license medicinal products but also for trials initiated by investigators. While trial-specific documentation is their most time-intensive task, the overall role of Study Nurses encompasses a very broad range of activities. For the most part, they work alone and independently but have various contacts mainly to patients and the investigator. Future research should take into consideration the motivation for opting for the job of Study Nurse and the question of whether through their training and experience nurses are better qualified than other healthcare professionals.

  14. Resources for Educators of Adults. Annotated Bibliography for the Education of Public Offenders: by Descriptive Subject Headings.

    ERIC Educational Resources Information Center

    Willis, Michael J.; And Others

    This bibliography is presented to assist educators who are engaged in research activities with inmate or ex-inmate populations. The first part contains entries under descriptive subject headings (alphabetically by author); the second part contains abstracts of the material listed in part 1 (alphabetically by title). The descriptive headings…

  15. Non-equilibrium thermodynamical description of rhythmic motion patterns of active systems: a canonical-dissipative approach.

    PubMed

    Dotov, D G; Kim, S; Frank, T D

    2015-02-01

    We derive explicit expressions for the non-equilibrium thermodynamical variables of a canonical-dissipative limit cycle oscillator describing rhythmic motion patterns of active systems. These variables are statistical entropy, non-equilibrium internal energy, and non-equilibrium free energy. In particular, the expression for the non-equilibrium free energy is derived as a function of a suitable control parameter. The control parameter determines the Hopf bifurcation point of the deterministic active system and describes the effective pumping of the oscillator. In analogy to the equilibrium free energy of the Landau theory, it is shown that the non-equilibrium free energy decays as a function of the control parameter. In doing so, a similarity between certain equilibrium and non-equilibrium phase transitions is pointed out. Data from an experiment on human rhythmic movements is presented. Estimates for pumping intensity as well as the thermodynamical variables are reported. It is shown that in the experiment the non-equilibrium free energy decayed when pumping intensity was increased, which is consistent with the theory. Moreover, pumping intensities close to zero could be observed at relatively slow intended rhythmic movements. In view of the Hopf bifurcation underlying the limit cycle oscillator model, this observation suggests that the intended limit cycle movements were actually more similar to trajectories of a randomly perturbed stable focus.

  16. Non-equilibrium thermodynamical description of rhythmic motion patterns of active systems: a canonical-dissipative approach.

    PubMed

    Dotov, D G; Kim, S; Frank, T D

    2015-02-01

    We derive explicit expressions for the non-equilibrium thermodynamical variables of a canonical-dissipative limit cycle oscillator describing rhythmic motion patterns of active systems. These variables are statistical entropy, non-equilibrium internal energy, and non-equilibrium free energy. In particular, the expression for the non-equilibrium free energy is derived as a function of a suitable control parameter. The control parameter determines the Hopf bifurcation point of the deterministic active system and describes the effective pumping of the oscillator. In analogy to the equilibrium free energy of the Landau theory, it is shown that the non-equilibrium free energy decays as a function of the control parameter. In doing so, a similarity between certain equilibrium and non-equilibrium phase transitions is pointed out. Data from an experiment on human rhythmic movements is presented. Estimates for pumping intensity as well as the thermodynamical variables are reported. It is shown that in the experiment the non-equilibrium free energy decayed when pumping intensity was increased, which is consistent with the theory. Moreover, pumping intensities close to zero could be observed at relatively slow intended rhythmic movements. In view of the Hopf bifurcation underlying the limit cycle oscillator model, this observation suggests that the intended limit cycle movements were actually more similar to trajectories of a randomly perturbed stable focus. PMID:25619737

  17. Estimated neutron-activation data for TFTR. Part II. Biological dose rate from sample-materials activation

    SciTech Connect

    Ku, L.; Kolibal, J.G.

    1982-06-01

    The neutron induced material activation dose rate data are summarized for the TFTR operation. This report marks the completion of the second phase of the systematic study of the activation problem on the TFTR. The estimations of the neutron induced activation dose rates were made for spherical and slab objects, based on a point kernel method, for a wide range of materials. The dose rates as a function of cooling time for standard samples are presented for a number of typical neutron spectrum expected during TFTR DD and DT operations. The factors which account for the variations of the pulsing history, the characteristic size of the object and the distance of observation relative to the standard samples are also presented.

  18. Use of silicon carbide sludge to form porous alkali-activated materials for insulating application

    NASA Astrophysics Data System (ADS)

    Prud'homme, E.; Joussein, E.; Rossignol, S.

    2015-07-01

    One of the objectives in the field of alkali-activated materials is the development of materials having greater thermal performances than conventional construction materials such as aerated concrete. The aim of this paper is to present the possibility to obtain controlled porosity and controlled thermal properties with geopolymer materials including a waste like silicon carbide sludge. The porosity is created by the reaction of free silicon contains in silicon carbide sludge leading to the formation of hydrogen. Two possible ways are investigated to control the porosity: modification of mixture formulation and additives introduction. The first way is the most promising and allowed the formation of materials presenting the same density but various porosities, which shows that the material is adaptable to the application. The insulation properties are logically linked to the porosity and density of materials. A lower value of thermal conductivity of 0.075 W.m-1.K-1 can be reached for a material with a low density of 0.27 g.cm-3. These characteristics are really good for a mineral-based material which always displays non-negligible resistance to manipulation.

  19. Electrode including porous particles with embedded active material for use in a secondary electrochemical cell

    DOEpatents

    Vissers, Donald R.; Nelson, Paul A.; Kaun, Thomas D.; Tomczuk, Zygmunt

    1978-04-25

    Particles of carbonaceous matrices containing embedded electrode active material are prepared for vibratory loading within a porous electrically conductive substrate. In preparing the particles, active materials such as metal chalcogenides, solid alloys of alkali or alkaline earth metals along with other metals and their oxides in powdered or particulate form are blended with a thermosetting resin and particles of a volatile to form a paste mixture. The paste is heated to a temperature at which the volatile transforms into vapor to impart porosity at about the same time as the resin begins to cure into a rigid, solid structure. The solid structure is then comminuted into porous, carbonaceous particles with the embedded active material.

  20. Method of preparing porous, active material for use in electrodes of secondary electrochemical cells

    DOEpatents

    Vissers, Donald R.; Nelson, Paul A.; Kaun, Thomas D.; Tomczuk, Zygmunt

    1977-01-01

    Particles of carbonaceous matrices containing embedded electrode active material are prepared for vibratory loading within a porous electrically conductive substrate. In preparing the particles, active materials such as metal chalcogenides, solid alloys of alkali or alkaline earth metals along with other metals and their oxides in powdered or particulate form are blended with a thermosetting resin and particles of a volatile to form a paste mixture. The paste is heated to a temperature at which the volatile transforms into vapor to impart porosity at about the same time as the resin begins to cure into a rigid, solid structure.The solid structure is then comminuted into porous, carbonaceous particles with the embedded active material.

  1. KCP Activities Supporting the W76LEP Stress Cushions and LK3626 RTV Replacement Material Development

    SciTech Connect

    J. W. Schneider

    2009-10-01

    The S-5370 RTV blown foam previously produced by Dow Corning is no longer commercially available. The S-5370 material has been used on all of Los Alamos National Laboratory (LANL) programs to manufacture Stress Cushions up through the W88. The Kansas City Plant (KCP) did not have a sufficient supply of S-5370 material to cover the schedule requirements for the Program. This report provides information on the numerous activities conducted at KCP involving the development of the Program Stress Cushion and replacement RTV material.

  2. Activity concentration of natural radioactive nuclides in nonmetallic industrial raw materials in Japan.

    PubMed

    Iwaoka, Kazuki; Tabe, Hiroyuki; Yonehara, Hidenori

    2014-11-01

    Natural materials such as rock, ore, and clay, containing natural radioactive nuclides are widely used as industrial raw materials in Japan. If these are high concentrations, the workers who handle the material can be unknowingly exposed to radiation at a high level. In this study, about 80 nonmetallic natural materials frequently used as industrial raw materials in Japan were comprehensively collected from several industrial companies, and the activity concentrations of (238)U series, (232)Th series and (40)K in the materials was determined by ICP-MS (inductively-coupled plasma mass spectrometer) and gamma ray spectrum analyses. Effective doses to workers handling them were estimated by using methods for dose estimation given in the RP 122. We found the activity concentrations to be lower than the critical values defined by regulatory requirements as described in the IAEA Safety Guide. The maximum estimated effective dose to workers handling these materials was 0.16 mSv y(-1), which was lower than the reference level (1-20 mSv y(-1)) for existing situation given in the ICRP Publ.103.

  3. Locating Vocational Education Materials. ERIC Digest No. 213.

    ERIC Educational Resources Information Center

    Wagner, Judith O.

    Vocational educators seeking curriculum materials, lesson plans, classroom activities, and other instructional materials can locate them in a variety of places. The ERIC database is a good source of information about the following instructional and resource materials: curricula, project descriptions, lesson plans, classroom activities, task lists,…

  4. Determination of elements in National Bureau of Standards' geological Standard Reference Materials by neutron activation analysis

    SciTech Connect

    Graham, C.C.; Glascock, M.D.; Carni, J.J.; Vogt, J.R.; Spalding, T.G.

    1982-08-01

    Instrumental neutron activation analysis (INAA) and prompt gamma neutron activation analysis (PGNAA) have been used to determine elemental concentrations in two recently issued National Bureau of Standards (NBS) Standard Reference Materials (SRM's). The results obtained are in good agreement with the certified and information values reported by NBS for those elements in each material for which comparisons are available. Average concentrations of 35 elements in SRM 278 obsidian rock and 32 elements in SRM 688 basalt rock are reported for comparison with results that may be obtained by other laboratories.

  5. Description of the Transcriptomes of Immune Response-Activated Hemocytes from the Mosquito Vectors Aedes aegypti and Armigeres subalbatus

    PubMed Central

    Bartholomay, Lyric C.; Cho, Wen-Long; Rocheleau, Thomas A.; Boyle, Jon P.; Beck, Eric T.; Fuchs, Jeremy F.; Liss, Paul; Rusch, Michael; Butler, Katherine M.; Wu, Roy Chen-Chih; Lin, Shih-Pei; Kuo, Hang-Yen; Tsao, I-Yu; Huang, Chiung-Yin; Liu, Tze-Tze; Hsiao, Kwang-Jen; Tsai, Shih-Feng; Yang, Ueng-Cheng; Nappi, Anthony J.; Perna, Nicole T.; Chen, Chen-Cheng; Christensen, Bruce M.

    2004-01-01

    Mosquito-borne diseases, including dengue, malaria, and lymphatic filariasis, exact a devastating toll on global health and economics, killing or debilitating millions every year (54). Mosquito innate immune responses are at the forefront of concerted research efforts aimed at defining potential target genes that could be manipulated to engineer pathogen resistance in vector populations. We aimed to describe the pivotal role that circulating blood cells (called hemocytes) play in immunity by generating a total of 11,952 Aedes aegypti and 12,790 Armigeres subalbatus expressed sequence tag (EST) sequences from immune response-activated hemocyte libraries. These ESTs collapsed into 2,686 and 2,107 EST clusters, respectively. The clusters were used to adapt the web-based interface for annotating bacterial genomes called A Systematic Annotation Package for Community Analysis of Genomes (ASAP) for analysis of ESTs. Each cluster was categorically characterized and annotated in ASAP based on sequence similarity to five sequence databases. The sequence data and annotations can be viewed in ASAP at https://asap.ahabs.wisc.edu/annotation/php/ASAP1.htm. The data presented here represent the results of the first high-throughput in vivo analysis of the transcriptome of immunocytes from an invertebrate. Among the sequences are those for numerous immunity-related genes, many of which parallel those employed in vertebrate innate immunity, that have never been described for these mosquitoes. PMID:15213157

  6. Graphical computational method for active materials in simulation of optical electromagnetics

    NASA Astrophysics Data System (ADS)

    Potasek, M.; Parilov, E.; Beeson, K.

    2014-03-01

    Traditional numerical analyses of laser beam transmission through "active" nonlinear materials have involved many assumptions that narrow their general applicability. As more complex optical phenomena are widely employed in research and industry, it is necessary to expand the use of numerical simulation methods. Historically, laser-matter interactions have involved calculations of "classical" wave propagation by Maxwell's equations and photon absorption through rate equations using numerous approximations. We describe a novel numerical modeling framework that adapts itself for simulation of different types of active materials provided by a simple graphical input. Our framework combines classical electric field propagation with "active" photon absorption kinetics using computational active photonic building blocks (APBB). It allows investigating a plane electromagnetic wave propagating through generic organic or inorganic photoactive materials; while, "active" photo-transitions are implemented using the APBB algorithm on the user interface. To date we have used the method in multiphoton absorbers, upconversion, semiconductor quantum dots, rare earth ions, organic chromophores, singlet oxygen formation, energy transfer, and optically-induced chemical reactions. We will demonstrate the method with applications of amplification in rare-earth ions and multiple two-photon absorbers materials in tandem.

  7. Management control system description

    SciTech Connect

    Bence, P. J.

    1990-10-01

    This Management Control System (MCS) description describes the processes used to manage the cost and schedule of work performed by Westinghouse Hanford Company (Westinghouse Hanford) for the US Department of Energy, Richland Operations Office (DOE-RL), Richland, Washington. Westinghouse Hanford will maintain and use formal cost and schedule management control systems, as presented in this document, in performing work for the DOE-RL. This MCS description is a controlled document and will be modified or updated as required. This document must be approved by the DOE-RL; thereafter, any significant change will require DOE-RL concurrence. Westinghouse Hanford is the DOE-RL operations and engineering contractor at the Hanford Site. Activities associated with this contract (DE-AC06-87RL10930) include operating existing plant facilities, managing defined projects and programs, and planning future enhancements. This document is designed to comply with Section I-13 of the contract by providing a description of Westinghouse Hanford's cost and schedule control systems used in managing the above activities. 5 refs., 22 figs., 1 tab.

  8. Evaluation of Light-Activated Provisional Resin Materials for Periodontal Soft Tissue Management

    PubMed Central

    Jun, Soo-Kyung; Lee, Hae-Hyoung

    2016-01-01

    The purpose of this study was to determine mechanical properties using a compressive test with cylinder specimen (h = 6 mm and ϕ = 4 mm) as well as cytotoxicity using elutes from disk specimen (ϕ = 10 mm and h = 2 mm) against human gingival fibroblasts and oral keratinocytes with light-activated provisional resin materials (Revotek LC and Luxatemp Solar) compared to chemically activated counterpart (Snap, Trim II, and Jet). Significantly increased compressive strength (210~280 MPa) was detected in light-activated products compared to chemically activated ones (20~65 MPa, P < 0.05) and similar compressive modulus was detected in both types (0.8~1.5 and 0.5~1.3 GPa). Simultaneously, the light-activated products showed less adverse effects on the periodontal soft tissue cells in any polymerization stage compared to the chemically activated products. Particularly, chemically activated products had significantly greater adverse effects during the “polymerizing” phase compared to those that were “already set” (P < 0.05), as shown in confocal microscopic images of live and dead cells. In conclusion, light-activated provisional resin materials have better mechanical properties as well as biocompatibility against two tested types of oral cells compared to the chemically activated counterpart, which are considered as more beneficial choice for periodontal soft tissue management. PMID:27672651

  9. Evaluation of Light-Activated Provisional Resin Materials for Periodontal Soft Tissue Management

    PubMed Central

    Jun, Soo-Kyung; Lee, Hae-Hyoung

    2016-01-01

    The purpose of this study was to determine mechanical properties using a compressive test with cylinder specimen (h = 6 mm and ϕ = 4 mm) as well as cytotoxicity using elutes from disk specimen (ϕ = 10 mm and h = 2 mm) against human gingival fibroblasts and oral keratinocytes with light-activated provisional resin materials (Revotek LC and Luxatemp Solar) compared to chemically activated counterpart (Snap, Trim II, and Jet). Significantly increased compressive strength (210~280 MPa) was detected in light-activated products compared to chemically activated ones (20~65 MPa, P < 0.05) and similar compressive modulus was detected in both types (0.8~1.5 and 0.5~1.3 GPa). Simultaneously, the light-activated products showed less adverse effects on the periodontal soft tissue cells in any polymerization stage compared to the chemically activated products. Particularly, chemically activated products had significantly greater adverse effects during the “polymerizing” phase compared to those that were “already set” (P < 0.05), as shown in confocal microscopic images of live and dead cells. In conclusion, light-activated provisional resin materials have better mechanical properties as well as biocompatibility against two tested types of oral cells compared to the chemically activated counterpart, which are considered as more beneficial choice for periodontal soft tissue management.

  10. Trace element analysis of K, U and Th in high purity materials by neutron activation analysis

    SciTech Connect

    Pillalamarri, Ila

    2005-09-08

    The concept and usage of 'high purity' are explained. Trace element analysis of K, U and Th by neutron activation analysis is described, the radio-isotopes and their corresponding gamma-rays used to identify the elements are listed. The interfering elements are described. The advantages and disadvantages of using neutron activation analysis are discussed. Some examples of trace impurity determinations in high purity materials are provided.

  11. Comparison of dielectric materials for the activation of a macro-scale hinge configuration

    NASA Astrophysics Data System (ADS)

    Jordi, C.; Schmidt, A.; Kovacs, G.; Ermanni, Paolo

    2011-04-01

    While much of the research on dielectric elastomer actuators used to concentrate on VHB 4910 as dielectric material, lately many new, specifically developed materials have come into focus. The acrylic VHB has been thoroughly characterized in a macro-scale agonist-antagonist configuration on an active hinge. This was carried out with the aim of using it on an airship, which was activated, undulating body and a fin and thus propelled in a fish-like manner. The concept was proved in flight, but still lifetime and viscosity of the actuators and the time-costing fabrication due to the necessary large pre-stretches of the dielectric membrane caused severe inconveniences. In order to evaluate the usability of other materials for this specific purpose, two other materials, a corrugated silicone with silver electrodes (by PolyPower) and an acrylic with interpenetrating network (IPN) developed by Pei et al. were characterized under similar conditions. The influence of the material on performance and design of the actuators and the conclusions for the use of the materials on the airship (and on applications with similar performance requirements) are presented.

  12. Capacitance improvement of supercapacitor active material based on activated carbon fiber working with a Li-ion containing electrolyte

    NASA Astrophysics Data System (ADS)

    Takamura, Tsutomu; Sato, Youh; Sato, Yuichi

    In an attempt to provide a favorable active material of Li + supercapacitor for HEV use, we modified the surface of an activated carbon fiber felt by coating with some transition metal oxides after mild-oxidation treatment. Major source of enhancing capacitance is attributed to be due to the nano-ionics mechanism proposed by Maier and coworkers. Cyclic voltammetry and constant current charge-discharge performance were examined for the surface modified samples in view of power capability. The oxides of Ag, Cu, Pd, and Sn were found effective to enhance the capacitance and high rate charge/discharge performance. The cycleability test was performed as well.

  13. Active Optical Metasurfaces Based on Defect-Engineered Phase-Transition Materials.

    PubMed

    Rensberg, Jura; Zhang, Shuyan; Zhou, You; McLeod, Alexander S; Schwarz, Christian; Goldflam, Michael; Liu, Mengkun; Kerbusch, Jochen; Nawrodt, Ronny; Ramanathan, Shriram; Basov, D N; Capasso, Federico; Ronning, Carsten; Kats, Mikhail A

    2016-02-10

    Active, widely tunable optical materials have enabled rapid advances in photonics and optoelectronics, especially in the emerging field of meta-devices. Here, we demonstrate that spatially selective defect engineering on the nanometer scale can transform phase-transition materials into optical metasurfaces. Using ion irradiation through nanometer-scale masks, we selectively defect-engineered the insulator-metal transition of vanadium dioxide, a prototypical correlated phase-transition material whose optical properties change dramatically depending on its state. Using this robust technique, we demonstrated several optical metasurfaces, including tunable absorbers with artificially induced phase coexistence and tunable polarizers based on thermally triggered dichroism. Spatially selective nanoscale defect engineering represents a new paradigm for active photonic structures and devices.

  14. Active packaging materials from Poly(Lactic Acid)and Pectin composites

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Active packaging of foods is receiving considerable attention from the food industry and food researchers. The ability to wrap foods in packaging materials that can provide additional functions, such as retaining freshness or preventing spoilage and pathogen growth, would be very important for the f...

  15. Hot-wire detector for chemically active materials used in gas chromatography

    NASA Technical Reports Server (NTRS)

    1966-01-01

    Hot-filament detector analyzes chemically active materials used in gas chromatography. The detector reacts chemically with the effluent vapors in the gas chromatographic apparatus to change the electrical resistance of the filament as a function of the affluent composition. Due to the changes produced by chemical action on the filament, the system is often calibrated.

  16. UPLC-Q-TOF-MS analysis of non-volatile migrants from new active packaging materials.

    PubMed

    Aznar, M; Rodriguez-Lafuente, A; Alfaro, P; Nerin, C

    2012-10-01

    Ultra-performance liquid chromatography (UPLC) coupled to mass spectrometry (MS) is a useful tool in the analysis of non-volatile compounds, and the use of a quadrupole-time-of-flight (Q-TOF) mass analyzer allows a high sensitivity and accuracy when acquiring full fragment mode, providing a high assurance of correct identification of unknown compounds. In this work, UPLC-Q-TOF-MS technology has been applied to the analysis of non-volatile migrants from new active packaging materials. The materials tested were based on polypropylene (PP), ethylene-vinyl alcohol copolymer (EVOH), and poly(ethylene terephthalate) (PET). The active packaging materials studied were one PP film containing a natural antioxidant, and two PP/EVOH films, two PET/EVOH films and one coextruded PP/EVOH/PP film containing natural antimicrobials. The chemical structure of several compounds was unequivocally identified. The analysis revealed the migration of some of the active substances used in the manufacture of active packaging, such as caffeine (0.07 ± 0.01 μg/g), carvacrol (0.31 ± 0.03 μg/g) and citral (0.20 ± 0.01 μg/g). Unintentionally added substances were also found, such as citral reaction compounds, or citral impurities present in the raw materials. PMID:22836481

  17. NREL Develops Accelerated Sample Activation Process for Hydrogen Storage Materials (Fact Sheet)

    SciTech Connect

    Not Available

    2010-12-01

    This fact sheet describes NREL's accomplishments in developing a new sample activation process that reduces the time to prepare samples for measurement of hydrogen storage from several days to five minutes and provides more uniform samples. Work was performed by NREL's Chemical and Materials Science Center.

  18. People* Working . . . *Especially Women . . . A Book of Materials, Activities, and Ideas for the Classroom Teacher.

    ERIC Educational Resources Information Center

    Valiant, Sharon

    This bibliography lists publications and other media, historical facts, and suggestions for activities that show women as working and accomplishing people. Materials are from all grade levels (K-12) and many subject areas. Arrangement is in three sections. Part I deals with women who have worked but not for wages, the pioneer, the homemaker, and…

  19. Metabolic activity of moulds as a factor of building materials biodegradation.

    PubMed

    Gutarowska, Beata

    2010-01-01

    This paper presents the effect of building materials on the growth and metabolic activity of moulds. In cultures of Aspergillus and Penicillium moulds grown on a model medium with the addition of building materials, the biomass of mycelium, its cellular components--glucan, chitin, ergosterol and the spectrum of enzymes and organic acids produced in the medium were investigated. It was found that on the medium with wallpaper moulds produced more biomass and extracellular enzymes, mainly glycolytic ones. On medium with mortar the growth of mycelium was impeded, production of biomass was 60% smaller, the quantity of chitin, glucan and ergosterol decreased 13-41%, and the activity of most enzymes was reduced; however the moulds intensively produced organic acids: malic, succinic and oxalic acid. The largest acid production activity was found in medium with addition of mortar; moulds produced the greatest variety of acids and in greater quantities than in the control medium. Metabolic activity of the moulds depends on the type of building material, and may lead to biodeterioration of these materials.

  20. Sorptive uptake of selenium with magnetite and its supported materials onto activated carbon.

    PubMed

    Kwon, Jae H; Wilson, Lee D; Sammynaiken, R

    2015-11-01

    Kinetic and equilibrium uptake studies of selenite in aqueous solution with synthetic magnetite (Mag-P), commercial magnetite (Mag-C), goethite, activated carbon (AC), and a composite material containing 19% magnetite supported on activated carbon (CM-19) were investigated. Kinetic uptake studies used a one-pot setup at pH 5.26 at variable temperature. Sampling of unbound selenite in-situ was achieved with analytical detection by atomic absorbance. The sorptive uptake at equilibrium and kinetic conditions are listed in descending order: goethite>Mag-P>Mag-C>CM-19. Kinetic uptake parameters reveal that Mag-P showed apparent negative values for the activation energy (E(a)) and the enthalpy of activation (ΔH(‡)), in agreement with a multi-step process for the kinetic uptake of selenite. By contrast, Mag-C, CM-19, and goethite showed positive values for E(a) and ΔH(‡). The uptake properties of the various sorbent materials with selenite are in accordance with the formation of inner- and out-sphere complexes. Leaching of iron from the composite material (CM-19) was attenuated due to the stabilizing effect of the magnetite within the pore sites and the surface of AC. Supported iron oxide nanomaterial composites represent a unique sorbent material with tunable uptake properties toward inorganic selenite in aqueous solution.

  1. MOF@activated carbon: a new material for adsorption of aldicarb in biological systems.

    PubMed

    de Oliveira, Carlos Alberto Fernandes; da Silva, Fausthon Fred; Jimenez, George Chaves; Neto, José Ferreira da S; de Souza, Daniela Maria Bastos; de Souza, Ivone Antônia; Alves, Severino

    2013-07-25

    A new composite was synthesized by the hydrothermal method using a 3D coordination network [Ln2(C4H4O4)3(H2O)2]·H2O (Ln = Eu and Tb) and activated carbon. The coordination network is formed within the pores of the charcoal, allowing for the use of this material as a detoxifying agent.

  2. Active Learning and Just-in-Time Teaching in a Material and Energy Balances Course

    ERIC Educational Resources Information Center

    Liberatore, Matthew W.

    2013-01-01

    The delivery of a material and energy balances course is enhanced through a series of in-class and out-of-class exercises. An active learning classroom is achieved, even at class sizes over 150 students, using multiple instructors in a single classroom, problem solving in teams, problems based on YouTube videos, and just-in-time teaching. To avoid…

  3. Poly(exTTF): a novel redox-active polymer as active material for li-organic batteries.

    PubMed

    Häupler, Bernhard; Burges, René; Friebe, Christian; Janoschka, Tobias; Schmidt, Daniel; Wild, Andreas; Schubert, Ulrich S

    2014-08-01

    The first polymer bearing exTTF units intended for the use in electrical charge storage is presented. The polymer undergoes a redox reaction involving two electrons at -0.20 V vs Fc/Fc(+) and is applied as active cathode material in a Li-organic battery. The received coin cells feature a theoretical capacity of 132 mAh g(-1) , a cell potential of 3.5 V, and a lifetime exceeding more than 250 cycles.

  4. Large-Area, Highly Ordered Array of Graphitic Carbon Materials Using Surface Active Chitosan Prepatterns.

    PubMed

    Baek, Youn-Kyoung; Kim, Dae Woo; Yang, Seung Bo; Lee, Jung-Goo; Kim, Young Kuk; Jung, Hee-Tae

    2015-02-01

    We demonstrate that chitosan prepatterns can generate not only highly periodic DNA pattern but also various types of graphitic carbon materials such as single-walled carbon nanotubes (SWNTs), graphene oxide (GO) and reduced graphene oxide (RGO). Scanning electron microscopy (SEM), fluorescence imaging and Raman spectroscopic results revealed that the graphitic carbon materials were selectively deposited on the surface of the periodic chitosan patterns by the electrostatic interaction between protonated amine groups of chitosan and the negative charged carbon materials. One proof-of-concept application of the system to the fabrication of electrical devices based on the micropatterns of SWNTs and RGO was also demonstrated. The strategy to use highly surface active chitosan pattern that can easily fabricate highly periodic pattern via a variety of lithographic tools may pave the way for the production of periodic arrays of graphitic carbon materials for large area device integration. PMID:26353637

  5. Ultrastrong Chemiluminescence Activity of Nanocarbon Materials after Ozonation and Their Effects on Different Chemiluminescent Systems.

    PubMed

    Yang, Feng; He, Duhong; Wang, Meina; Zheng, Baozhan; Wu, Li; Xiao, Dan; Guo, Yong

    2016-06-20

    Ozonized nanocarbon materials with different dimensionalities, structures, and components exhibited significantly different chemiluminescence (CL) activities. The ozonation time and the weight ratio of hydroxyl carbon nanotubes (d≈8 nm, hyCNTs-8) and graphene oxide (GO) strongly affected the CL activity of ozonized hybrids. Among GO, hyCNTs-8, and GO/hyCNTs-8, the GO/hyCNTs-8 hybrids exhibited the strongest CL-enhancing properties toward the luminol/H2 O2 system, in contrast to previous reports. This study provides new understanding of the CL activity and CL-enhancing properties of nanocarbon materials in signal-enhanced analytical and biomedical fields. PMID:27144483

  6. Effect of wall material on the antioxidant activity and physicochemical properties of Rubus fruticosus juice microcapsules.

    PubMed

    Díaz, Dafne I; Beristain, Cesar I; Azuara, Ebner; Luna, Guadalupe; Jimenez, Maribel

    2015-01-01

    Blackberry (Rubus fruticosus) juice possesses compounds with antioxidant activity, which can be protected by different biopolymers used in the microencapsulation. Therefore, the effects of cell wall material including maltodextrin (MD), Arabic gum (GA) and whey protein concentrate (WPC) were evaluated on the physicochemical and antioxidant properties of encapsulated blackberries using a spray-drying technique. Anthocyanin concentration, polymeric colour, total polyphenols, radical scavenging activity of the 1,1-diphenyl-2-picrilhydrazil radical, reducing power and the stability at different storage conditions were evaluated. GA and MD conferred a similar protection to the antioxidant compounds when the microcapsules were stored at low water activities (aw < 0.515) in contrast to at a high moisture content (aw > 0.902), whereas WPC presented a high protection. Therefore, the selection of the best wall material for blackberry juice encapsulation depends of the conditions of storage of the powder.

  7. Integration of active materials with silicon micromachining: applications to optical MEMS

    NASA Astrophysics Data System (ADS)

    Gouy, Jean-Philippe; Arakawa, Yasuhiko; Fujita, Hiroyuki

    2001-11-01

    Most of the MOEMS including optical switches and micro optical benches are developed on silicon. As for the MEMS, the main reason is that silicon has consistently been the material of choice for the microelectronics industry, due to a mature processing technology which offers the possibility to integrate MEMS devices with Integrated Circuits in a low cost batch fabrication process. However, since the beginning of Optoelectronic, silicon has been suffering from its poor efficiency to emit light because of its indirect band gap. Optical active devices can be integrated on silicon by combining specific active materials in order to keep the main advantage of silicon micromachining for MOEMS applications. This paper illustrates this purpose through one project developed in the frame of the LIMMS, joint laboratory between France and Japan. This project deals with optical active devices for which silicon micromachining technology has been employed to fabricate an organic semiconductors based light emitted diode on silicon substrate.

  8. Derivatives of Z-bisdehydrodoisynolic acid provide a new description of the binding-activity paradox and selective estrogen receptor modulator activity.

    PubMed

    Adler, Molly; Hou, Yuqing; Sandrock, Paul; Meyers, Cal Y; Winters, Todd A; Banz, William J; Adler, Stuart

    2006-08-01

    Z-Bisdehydrodoisynolic acid [(+/-)-Z-BDDA], an estrogenic carboxylic acid, is highly active in vivo yet binds poorly to estrogen receptors (ERs). Studies of Z-BDDA and its enantiomers demonstrate therapeutic potential as selective ER modulators; however, the activity vs. binding paradox has remained. One possible explanation is that the carboxylic acid group of Z-BDDA may be modified in vivo to an ester or amide. Synthesis of these derivatives showed the relative binding affinity (RBA) of the methyl ester for ERalpha and ERbeta was increased approximately 14- and 20-fold, respectively, relative to the parent compound. Yet, this increased affinity did not result in increased reporter gene expression. In contrast, the amide showed an unexpected approximately 4-fold decrease in RBA to both ERs compared with the parent. The relationship among the RBAs of ester, acid, and amide is consistent with their predicted polarity, suggesting the carboxylic acid, and not the carboxylate of BDDA, binds to ERs. Studies at pH 6.5, 7.4, and 8.0 were consistent with a simple acid-base equilibrium model, with BDDA binding as the undissociated acid and with affinity equal to or exceeding that of estradiol, consistent with high in vivo potency. Furthermore, the alcohol BDD-OH also demonstrated high affinity and increased activity in gene expression assays. In addition to suggesting a resolution to the decades-old binding/activity paradox, these studies may provide a direction for definitive in vivo metabolic and pharmacokinetic studies and provide additional insight into the chemical and metabolic determinants of BBDA's unique tissue selectivity and selective ER modulator activities.

  9. Microstructure design of metal composite for active material in sodium nickel-iron chloride battery

    NASA Astrophysics Data System (ADS)

    Ahn, Cheol-Woo; Kim, Mangi; Hahn, Byung-Dong; Hong, Inchul; Kim, Woosung; Moon, Goyoung; Lee, Heesoo; Jung, Keeyoung; Park, Yoon-Cheol; Choi, Joon-Hwan

    2016-10-01

    In this manuscript, it is reported how the microstructure of metal composites can be designed to obtain excellent cycle performance in Na-(Ni,Fe)Cl2 battery. The microstructure consists of an active material and a conducting material. The conducting material is an active material as well as a conducting chain (an electron path). In Na-(Ni,Fe)Cl2 cells, it is preferable that Ni is selected as the conducting material, since the nickel chloride is not formed on the surface of Ni particles during the electrochemical reaction of Fe particles. In addition, the particle size of Ni should be smaller than that of Fe, in order to ensure that the conducting chain is well-connected. Through this design, the cycle performance of a Na-(Ni,Fe)Cl2 cell was significantly improved, compared to that of a Na-NiCl2 cell. At the 100th cycle, the charge/discharge capacity of a Na-(Ni,Fe)Cl2 cell was much higher than that of a Na-NiCl2 cell, approximately 42%.

  10. Effect of packing material on methane activation in a dielectric barrier discharge reactor

    SciTech Connect

    Jo, Sungkwon; Hoon Lee, Dae; Seok Kang, Woo; Song, Young-Hoon

    2013-12-15

    The conversion of methane is measured in a planar-type dielectric barrier discharge reactor using γ-Al{sub 2}O{sub 3} (sphere), α-Al{sub 2}O{sub 3} (sphere), and γ-Al{sub 2}O{sub 3} (16–20 mesh). Investigations on the surface properties and shape of the three packing materials clearly indicate that methane activation is considerably affected by the material used. Capacitances inside the discharge gap are estimated from charge–voltage plots, and a comparison of the generated and transferred charges for different packing conditions show that the difference in surface properties between γ- and α-phase Al{sub 2}O{sub 3} affects the discharge characteristics. Moreover, all packing conditions show different charge characteristics that are related to the electron density. Finally, the packing material's shape affects the local electron temperature, which is strongly related to methane conversion. The combined results indicate that both microscale and macroscale variations in a packing material affect the discharge characteristics, and a packing material should be considered carefully for effective methane activation.

  11. Effect of packing material on methane activation in a dielectric barrier discharge reactor

    NASA Astrophysics Data System (ADS)

    Jo, Sungkwon; Hoon Lee, Dae; Seok Kang, Woo; Song, Young-Hoon

    2013-12-01

    The conversion of methane is measured in a planar-type dielectric barrier discharge reactor using γ-Al2O3 (sphere), α-Al2O3 (sphere), and γ-Al2O3 (16-20 mesh). Investigations on the surface properties and shape of the three packing materials clearly indicate that methane activation is considerably affected by the material used. Capacitances inside the discharge gap are estimated from charge-voltage plots, and a comparison of the generated and transferred charges for different packing conditions show that the difference in surface properties between γ- and α-phase Al2O3 affects the discharge characteristics. Moreover, all packing conditions show different charge characteristics that are related to the electron density. Finally, the packing material's shape affects the local electron temperature, which is strongly related to methane conversion. The combined results indicate that both microscale and macroscale variations in a packing material affect the discharge characteristics, and a packing material should be considered carefully for effective methane activation.

  12. Secondary cell with orthorhombic alkali metal/manganese oxide phase active cathode material

    DOEpatents

    Doeff, M.M.; Peng, M.Y.; Ma, Y.; Visco, S.J.; DeJonghe, L.C.

    1996-09-24

    An alkali metal manganese oxide secondary cell is disclosed which can provide a high rate of discharge, good cycling capabilities, good stability of the cathode material, high specific energy (energy per unit of weight) and high energy density (energy per unit volume). The active material in the anode is an alkali metal and the active material in the cathode comprises an orthorhombic alkali metal manganese oxide which undergoes intercalation and deintercalation without a change in phase, resulting in a substantially linear change in voltage with change in the state of charge of the cell. The active material in the cathode is an orthorhombic structure having the formula M{sub x}Z{sub y}Mn{sub (1{minus}y)}O{sub 2}, where M is an alkali metal; Z is a metal capable of substituting for manganese in the orthorhombic structure such as iron, cobalt or titanium; x ranges from about 0.2 in the fully charged state to about 0.75 in the fully discharged state, and y ranges from 0 to 60 atomic %. Preferably, the cell is constructed with a solid electrolyte, but a liquid or gelatinous electrolyte may also be used in the cell. 11 figs.

  13. Performance evaluation of polyaniline as an active material for electrochemical capacitors

    SciTech Connect

    Rudge, A.; Davey, J.; Uribe, F.; Landeros, J. Jr.; Gottesfeld, S.

    1994-08-01

    This paper describes experiments which evaluate the performance of polyaniline (PAni) as an active material in electrochemical capacitors. We have performed constant current multicycle tests on prototype symmetric devices where the same conducting polymer serves as the active material on both electrodes. When electropolymerized at high current density in aqueous acid solution, PAni exhibits a micro-morphology consisting of a network of interwoven fibrils with high porosity. Thick PAni layers (>250 {mu}m) of the material can thus be electropolymerized onto a planar metal substrate without affecting the fast dynamics of the charge-discharge process. The aqueous PAni electrochemical capacitors exhibit rather low energy content because of limitations on the maximum applied voltage. However, due to their optimized morphology and the high conductivity of the aqueous acid solution, they exhibit relatively high power density. The PAni capacitor exhibits excellent cycle life (more than 25,000 cycles), provided the requirements on restricted cell voltage are met. This is a key result in the evaluation of conducting polymers as active materials in electrochemical capacitors. Scanning electron microscopy and impedance spectroscopy are used to provide information on this system.

  14. Secondary cell with orthorhombic alkali metal/manganese oxide phase active cathode material

    DOEpatents

    Doeff, Marca M.; Peng, Marcus Y.; Ma, Yanping; Visco, Steven J.; DeJonghe, Lutgard C.

    1996-01-01

    An alkali metal manganese oxide secondary cell is disclosed which can provide a high rate of discharge, good cycling capabilities, good stability of the cathode material, high specific energy (energy per unit of weight) and high energy density (energy per unit volume). The active material in the anode is an alkali metal and the active material in the cathode comprises an orthorhombic alkali metal manganese oxide which undergoes intercalation and deintercalation without a change in phase, resulting in a substantially linear change in voltage with change in the state of charge of the cell. The active material in the cathode is an orthorhombic structure having the formula M.sub.x Z.sub.y Mn.sub.(1-y) O.sub.2, where M is an alkali metal; Z is a metal capable of substituting for manganese in the orthorhombic structure such as iron, cobalt or titanium; x ranges from about 0.2 in the fully charged state to about 0.75 in the fully discharged state, and y ranges from 0 to 60 atomic %. Preferably, the cell is constructed with a solid electrolyte, but a liquid or gelatinous electrolyte may also be used in the cell.

  15. CO2 Activated Carbon Aerogel with Enhanced Electrochemical Performance as a Supercapacitor Electrode Material.

    PubMed

    Lee, Eo Jin; Lee, Yoon Jae; Kim, Jeong Kwon; Hong, Ung Gi; Yi, Jongheop; Yoon, Jung Rag; Song, In Kyu

    2015-11-01

    Carbon aerogel (CA) was prepared by a sol-gel polymerization of resorcinol and formaldehyde in ambient conditions. A series of activated carbon aerogels (ACA-X, X = 1, 2, 3, 4, 5, and 6 h) were then prepared by CO2 activation of CA with a variation of activation time (X) for use as an electrode material for supercapacitor. Specific capacitances of CA and ACA-X electrodes were measured by cyclic voltammetry and galvanostatic charge/discharge methods in 6 M KOH electrolyte. Among the samples, ACA-5 h showed the highest BET surface area (2574 m2/g) and the highest specific capacitance (100 F/g). It was found that CO2 activation was a very efficient method for enhancing physicochemical property and supercapacitive electrochemical performance of activated carbon aerogel.

  16. Biopolymer-Activated Graphitic Carbon Nitride towards a Sustainable Photocathode Material

    PubMed Central

    Zhang, Yuanjian; Schnepp, Zoë; Cao, Junyu; Ouyang, Shuxin; Li, Ying; Ye, Jinhua; Liu, Songqin

    2013-01-01

    Photoelectrochemical (PEC) conversion of solar light into chemical fuels is one of the most promising solutions to the challenge of sustainable energy. Graphitic carbon (IV) nitride polymer (g-CN) is an interesting sustainable photocathode material due to low-cost, visible-light sensitivity, and chemical stability up to 500°C in air. However, grain boundary effects and limited active sites greatly hamper g-CN activity. Here, we demonstrate biopolymer-activation of g-CN through simultaneous soft-templating of a sponge-like structure and incorporation of active carbon-dopant sites. This facile approach results in an almost 300% increase in the cathodic PEC activity of g-CN under simulated solar-irradiation. PMID:23831846

  17. CO2 Activated Carbon Aerogel with Enhanced Electrochemical Performance as a Supercapacitor Electrode Material.

    PubMed

    Lee, Eo Jin; Lee, Yoon Jae; Kim, Jeong Kwon; Hong, Ung Gi; Yi, Jongheop; Yoon, Jung Rag; Song, In Kyu

    2015-11-01

    Carbon aerogel (CA) was prepared by a sol-gel polymerization of resorcinol and formaldehyde in ambient conditions. A series of activated carbon aerogels (ACA-X, X = 1, 2, 3, 4, 5, and 6 h) were then prepared by CO2 activation of CA with a variation of activation time (X) for use as an electrode material for supercapacitor. Specific capacitances of CA and ACA-X electrodes were measured by cyclic voltammetry and galvanostatic charge/discharge methods in 6 M KOH electrolyte. Among the samples, ACA-5 h showed the highest BET surface area (2574 m2/g) and the highest specific capacitance (100 F/g). It was found that CO2 activation was a very efficient method for enhancing physicochemical property and supercapacitive electrochemical performance of activated carbon aerogel. PMID:26726618

  18. Carbon fibers: Thermochemical recovery from advanced composite materials and activation to an adsorbent

    NASA Astrophysics Data System (ADS)

    Staley, Todd Andrew

    This research addresses an expanding waste disposal problem brought about by the increasing use of advanced composite materials, and the lack of technically and environmentally viable recycling methods for these materials. A thermochemical treatment process was developed and optimized for the recycling of advanced composite materials. Counter-current gasification was employed for the treatment of carbon fiber reinforced-epoxy resin composite wastes. These materials were treated, allowing the reclamation of the material's valuable components. As expected in gasification, the organic portion of the waste was thermochemically converted to a combustible gas with small amounts of organic compounds that were identified by GC/MS. These compounds were expected based on data in the literature. The composites contain 70% fiber reinforcement, and gasification yielded approximately 70% recovered fibers, representing nearly complete recovery of fibers from the waste. Through SEM and mechanical testing, the recovered carbon fibers were found to be structurally and mechanically intact, and amenable to re-use in a variety of applications, some of which were identified and tested. In addition, an application was developed for the carbon fiber component of the waste, as an activated carbon fiber adsorbent for the treatment of wastewaters. This novel class of adsorbent was found to have adsorption rates, for various organic molecules, up to a factor of ten times those of commercial granular activated carbon, and adsorption capacities similar to conventional activated carbons. Overall, the research addresses an existing environmental waste problem, employing a thermochemical technique to recycle and reclaim the waste. Components of the reclaimed waste material are then employed, after further modification, to address other existing and potential environmental waste problems.

  19. Interactions between Activation and Repolarization Restitution Properties in the Intact Human Heart: In-Vivo Whole-Heart Data and Mathematical Description

    PubMed Central

    Taggart, Peter; Srinivasan, Neil; Hayward, Martin; Lambiase, Pier D.

    2016-01-01

    Background The restitution of the action potential duration (APDR) and conduction velocity (CVR) are mechanisms whereby cardiac excitation and repolarization adapt to changes in heart rate. They modulate the vulnerability to dangerous arrhythmia, but the mechanistic link between restitution and arrhythmogenesis remains only partially understood. Methods This paper provides an experimental and theoretical study of repolarization and excitation restitution properties and their interactions in the intact human epicardium. The interdependence between excitation and repolarization dynamic is studied in 8 patients (14 restitution protocols, 1722 restitution curves) undergoing global epicardial mapping with multi-electrode socks before open heart surgery. A mathematical description of the contribution of both repolarization and conduction dynamics to the steepness of the APDR slope is proposed. Results This study demonstrates that the APDR slope is a function of both activation and repolarization dynamics. At short cycle length, conduction delay significantly increases the APDR slope by interacting with the diastolic interval. As predicted by the proposed mathematical formulation, the APDR slope was more sensitive to activation time prolongation than to the simultaneous shortening of repolarization time. A steep APDR slope was frequently identified, with 61% of all cardiac sites exhibiting an APDR slope > 1, suggesting that a slope > 1 may not necessarily promote electrical instability in the human epicardium. APDR slope did not change for different activation or repolarization times, and it was not a function of local baseline APD. However, it was affected by the spatial organization of electrical excitation, suggesting that in tissue APDR is not a unique function of local electrophysiological properties. Spatial heterogeneity in both activation and repolarization restitution contributed to the increase in the modulated dispersion of repolarization, which for short cycle

  20. Evaluation of cytotoxicity, antimicrobial activity and physicochemical properties of a calcium aluminate-based endodontic material

    PubMed Central

    SILVA, Emmanuel João Nogueira Leal; HERRERA, Daniel Rodrigo; ROSA, Tiago Pereira; DUQUE, Thais Mageste; JACINTO, Rogério Castilho; GOMES, Brenda Paula Figueiredo de Almeida; ZAIA, Alexandre Augusto

    2014-01-01

    A calcium aluminate-based endodontic material, EndoBinder, has been developed in order to reduce MTA negative characteristics, preserving its biological properties and clinical applications. Objectives The aim of this study was to evaluate the cytotoxicity, antimicrobial activity, pH, solubility and water sorption of EndoBinder and to compare them with those of white MTA (WMTA). Material and Methods Cytotoxicity was assessed through a multiparametric analysis employing 3T3 cells. Antimicrobial activity against Enterococcus faecalis (ATCC 29212), Staphylococcus aureus. (ATCC 25923) and Candida albicans (ATCC 10556) was determined by the agar diffusion method. pH was measured at periods of 3, 24, 72 and 168 hours. Solubility and water sorption evaluation were performed following ISO requirements. Data were statistically analyzed by ANOVA and Tukey`s test with a significance level of 5%. Results EndoBinder and WMTA were non-cytotoxic in all tested periods and with the different cell viability parameters. There was no statistical differences between both materials (P>.05). All tested materials were inhibitory by direct contact against all microbial strains tested. EndoBinder and WMTA presented alkaline pH in all tested times with higher values of pH for WMTA (P<.05). Both materials showed values complying with the solubility minimum requirements. However, EndoBinder showed lower solubility than WMTA (P<.05). No statistical differences were observed regarding water sorption (P>.05). Conclusion Under these experimental conditions, we concluded that the calcium aluminate-based endodontic material EndoBinder demonstrated suitable biological and physicochemical properties, so it can be suggested as a material of choice in root resorption, perforations and root-end filling. PMID:24626250

  1. Cyclical tests of selected space shuttle TPS metallic materials in a plasma arc tunnel Volume 1: Description of tests and program summary

    NASA Technical Reports Server (NTRS)

    Rinehart, W. A.; Land, D. W.; Painter, J. H.; Williamson, R. A.

    1972-01-01

    Work, concerned with cyclical thermal evaluation of selected space shuttle thermal protection system (TPS) metallic materials in a hypervelocity oxidizing atmosphere that approximated an actual entry environment, is presented. A total of 325 sample test hours were conducted on 21 super-alloy metallic samples at temperatures from 1800 to 2200 F (1256 to 1478 K) without any failures. The 4 x 4 in. (10.2 x 10.2 cm) samples were fabricated from five nickel base alloys and one cobalt base alloy. Eighteen of the samples were cycled 100 times each and the other three samples 50 times each in a test stream emanating from an 8 in. (20.3 cm) diam exit, Mach 4.6, conical nozzle. The test cycle consisted of a 10 min heat pulse to a controlled temperature followed by a 10 min cooldown period. The TD-NiCrAl and TD-NiAlY materials showed the least change in weight, thickness, and physical appearance even though they were subjected to the highest temperature environment.

  2. Push for new materials, chemicals from biomass sparks active R and D

    SciTech Connect

    Borman, S. )

    1990-09-01

    This paper discusses how a resurgence of interest in the production of new materials, chemicals, and fuels from biomass resources such as wood, cellulose, lignin, starch, and chitin is sparking active R and D efforts in these areas. Biobased materials and chemicals currently under development include composites of conventional plastics with lignocellulosics (chemicals from wood and other plant sources); lignocellulosic nonwoven mates that can be pressed into rigid shapes to form doors, walls, and even auto body parts; phenolic chemicals produced from wood waste and bark; membranes made from chitosan (a substance derived from crustacean shells); and biodegradable plastics containing starch.

  3. The feasibility of recycling and clearance of active materials from fusion power plants

    NASA Astrophysics Data System (ADS)

    Zucchetti, M.; El-Guebaly, L. A.; Forrest, R. A.; Marshall, T. D.; Taylor, N. P.; Tobita, K.

    2007-08-01

    In order to minimize the quantity of active materials that require long-term storage, arising during operation and after fusion power plant decommissioning, maximum use should be made of both recycling within the nuclear industry and clearance. For the latter, revised limits have been recently issued at the international level and in the US and Europe. In this paper the implications for fusion materials of these new levels are considered. Concerning recycling, power plant studies have employed criteria based solely on radiological parameters. Reviews of remote procedures currently used within the nuclear industry suggest that these criteria have been unduly conservative and should be revised.

  4. Sun-tracking optical element realized using thermally activated transparency-switching material.

    PubMed

    Apostoleris, Harry; Stefancich, Marco; Lilliu, Samuele; Chiesa, Matteo

    2015-07-27

    We present a proof of concept demonstration of a novel optical element: a light-responsive aperture that can track a moving light beam. The element is created using a thermally-activated transparency-switching material composed of paraffin wax and polydimethylsiloxane (PDMS). Illumination of the material with a focused beam causes the formation of a localized transparency at the focal spot location, due to local heating caused by absorption of a portion of the incident light. An application is proposed in a new design for a self-tracking solar collector. PMID:26367692

  5. Evaluation of homogeneity of a certified reference material by instrumental neutron activation analysis

    SciTech Connect

    Kratochvil, B.; Duke, M.J.M.; Ng, D.

    1986-01-01

    The homogeneity of the marine reference material TORT-1, a spray-dried and acetone-extracted hepatopancreatic material from the lobster, was tested for 26 elements by instrumental neutron activation analysis (INAA). Through a one-way analysis of variance based on six analyses on each of six bottles of TORT-1, it was concluded that the between-bottle heterogeneity is no greater than the within-bottle heterogeneity. The analytical results for those elements for which values were provided by NRC agree with the NRC values within 95% confidence limits. 8 references, 6 tables.

  6. Nanocrosses of lead sulphate as the negative active material of lead acid batteries

    NASA Astrophysics Data System (ADS)

    Liu, Yi; Gao, Pengran; Bu, Xianfu; Kuang, Guizhi; Liu, Wei; Lei, Lixu

    2014-10-01

    Lead sulphate transforms into PbO2 and Pb in the positive and negative electrodes, respectively, when a lead acid battery is charged, thus, it is an active material. It is also generally acknowledged that sulphation results in the failure of lead acid batteries; therefore, it is very interesting to find out how to make lead sulphate more electrochemically active. Here, we demonstrate that nanocrystalline lead sulphate can be used as excellent negative active material in lead acid batteries. The lead sulphate nanocrystals, which are prepared by a facile chemical precipitation of aqueous lead acetate and sodium sulphate in a few minutes, look like crosses with diameter of each arm being 100 nm to 3 μm. The electrode is effectively formed in much shorter time than traditional technique, yet it discharges a capacity of 103 mA h g-1 at the current density of 120 mA g-1, which is 24% higher than that discharged by the electrode made from leady oxide under the same condition. During 100% DOD cycles, more than 80% of that capacity remains in 550 cycles. These results show that lead sulphate can be a nice negative active material in lead acid batteries.

  7. Identification of primary aromatic amines in mutagenically active subfractions from coal liquefaction materials.

    PubMed

    Wilson, B W; Pelroy, R; Cresto, J T

    1980-11-01

    Gas-chromatographic mass spectral (GCMS) analyses were performed on mutagenically active components from the basic, basic tar and neutral tar subfractions of a coal-derived liquid heavy distillate. The latter material is a component fraction of an experimental oil produced in a solvent refined coal process (SRC II) pilot plant. Mutagenicity was determined with the Ames/Salmonella assay system. Thin-layer chromatography (TLC) was used to separate mutagenically active components of the basic, basic tar and neutral tar fractions from some of the other compounds contained in these complex materials. For the 3 fractions tested, mutagenic activity was localized in approx. the same TLC regions, with relative mobilities (Rf) ranging from 0.1 to 0.3. GCMS analysis of the TLC regions showed that the concentrations of primary aromatic amines, as obtained by measuring peak areas for the (M + 1)+ ion as formed in the chemical ionization mode, followed essentially the same distribution as the mutagenic activity. Primary aromatic amines identified in the active regions included aminonaphthalenes, aminoanthracenes, aminophenanthrenes, aminopyrenes and aminochrysenes. With the exception of small amounts of aminonaphthalene, primary aromatic amines were not found in TLC regions that lacked mutagenic activity.

  8. Effect of different mulch materials on the soil dehydrogenase activity (DHA) in an organic pepper crop

    NASA Astrophysics Data System (ADS)

    Moreno, Marta M.; Peco, Jesús; Campos, Juan; Villena, Jaime; González, Sara; Moreno, Carmen

    2016-04-01

    The use biodegradable materials (biopolymers of different composition and papers) as an alternative to conventional mulches has increased considerably during the last years mainly for environmental reason. In order to assess the effect of these materials on the soil microbial activity during the season of a pepper crop organically grown in Central Spain, the soil dehydrogenase activity (DHA) was measured in laboratory. The mulch materials tested were: 1) black polyethylene (PE, 15 μm); black biopolymers (15 μm): 2) Mater-Bi® (corn starch based), 3) Sphere 4® (potato starch based), 4) Sphere 6® (potato starch based), 5) Bioflex® (polylactic acid based), 6) Ecovio® (polylactic acid based), 7) Mimgreen® (black paper, 85 g/m2). A randomized complete block design with four replications was adopted. The crop was drip irrigated following the water demand of each treatment. Soil samples (5-10 cm depth) under the different mulches were taken at different dates (at the beginning of the crop cycle and at different dates throughout the crop season). Additionally, samples of bare soil in a manual weeding and in an untreated control were taken. The results obtained show the negative effect of black PE on the DHA activity, mainly as result of the higher temperature reached under the mulch and the reduction in the gas interchange between the soil and the atmosphere. The values corresponding to the biodegradable materials were variable, although highlighting the low DHA activity observed under Bioflex®. In general, the uncovered treatments showed higher values than those reached under mulches, especially in the untreated control. Keywords: mulch, biodegradable, biopolymer, paper, dehydrogenase activity (DHA). Acknowledgements: the research was funded by Project RTA2011-00104-C04-03 from the INIA (Spanish Ministry of Economy and Competitiveness).

  9. Evaluation of Activity Concentration Values and Doses due to the Transport of Low Level Radioactive Material

    SciTech Connect

    Rawl, Richard R; Scofield, Patricia A; Leggett, Richard Wayne; Eckerman, Keith F

    2010-04-01

    The International Atomic Energy Agency (IAEA) initiated an international Coordinated Research Project (CRP) to evaluate the safety of transport of naturally occurring radioactive material (NORM). This report presents the United States contribution to that IAEA research program. The focus of this report is on the analysis of the potential doses resulting from the transport of low level radioactive material. Specific areas of research included: (1) an examination of the technical approach used in the derivation of exempt activity concentration values and a comparison of the doses associated with the transport of materials included or not included in the provisions of Paragraph 107(e) of the IAEA Safety Standards, Regulations for the Safe Transport of Radioactive Material, Safety Requirements No. TS-R-1; (2) determination of the doses resulting from different treatment of progeny for exempt values versus the A{sub 1}/A{sub 2} values; and (3) evaluation of the dose justifications for the provisions applicable to exempt materials and low specific activity materials (LSA-I). It was found that the 'previous or intended use' (PIU) provision in Paragraph 107(e) is not risk informed since doses to the most highly exposed persons (e.g., truck drivers) are comparable regardless of intended use of the transported material. The PIU clause can also have important economic implications for co-mined ores and products that are not intended for the fuel cycle but that have uranium extracted as part of their industrial processing. In examination of the footnotes in Table 2 of TS-R-1, which identifies the progeny included in the exempt or A1/A2 values, there is no explanation of how the progeny were selected. It is recommended that the progeny for both the exemption and A{sub 1}/A{sub 2} values should be similar regardless of application, and that the same physical information should be used in deriving the limits. Based on the evaluation of doses due to the transport of low-level NORM

  10. Field-exposure study for determining the effects of acid deposition on the corrosion and deterioration of materials: description of program and preliminary results

    SciTech Connect

    Flinn, D.R.; Cramer, S.D.; Carter, J.P.; Spence, J.W.

    1985-01-01

    Materials-exposure sites, fully instrumented to characterize environmental parameters related to air quality, meteorology, and rain chemistry, were established at four locations in the eastern and northeastern United States to study the effects of acid precipitation on atmospheric damage to metals, exterior paints, and building stone. A fifth, midwestern site has recently been added to the program. Utilizing short-term, seasonal, and long-term exposures, the corrosion behavior of five metal alloys (1010 carbon steel, Cor-Ten A, 3003-H14 aluminum, 110 copper, and 191 zinc) and two coated-steel products (galvanized steel and Galvalume) commonly used outdoors have been characterized using gravimetric, surface analytical, and corrosion film chemistry measurements. Monthly exposures indicate that the environments at the sites are significantly different in their effects on the metals.

  11. Materials

    NASA Technical Reports Server (NTRS)

    Glaessgen, Edward H.; Schoeppner, Gregory A.

    2006-01-01

    NASA Langley Research Center has successfully developed an electron beam freeform fabrication (EBF3) process, a rapid metal deposition process that works efficiently with a variety of weldable alloys. The EBF3 process can be used to build a complex, unitized part in a layer-additive fashion, although the more immediate payoff is for use as a manufacturing process for adding details to components fabricated from simplified castings and forgings or plate products. The EBF3 process produces structural metallic parts with strengths comparable to that of wrought product forms and has been demonstrated on aluminum, titanium, and nickel-based alloys to date. The EBF3 process introduces metal wire feedstock into a molten pool that is created and sustained using a focused electron beam in a vacuum environment. Operation in a vacuum ensures a clean process environment and eliminates the need for a consumable shield gas. Advanced metal manufacturing methods such as EBF3 are being explored for fabrication and repair of aerospace structures, offering potential for improvements in cost, weight, and performance to enhance mission success for aircraft, launch vehicles, and spacecraft. Near-term applications of the EBF3 process are most likely to be implemented for cost reduction and lead time reduction through addition of details onto simplified preforms (casting or forging). This is particularly attractive for components with protruding details that would require a significantly large volume of material to be machined away from an oversized forging, offering significant reductions to the buy-to-fly ratio. Future far-term applications promise improved structural efficiency through reduced weight and improved performance by exploiting the layer-additive nature of the EBF3 process to fabricate tailored unitized structures with functionally graded microstructures and compositions.

  12. Facile synthesis, characterization, and antimicrobial activity of cellulose-chitosan-hydroxyapatite composite material: a potential material for bone tissue engineering.

    PubMed

    Mututuvari, Tamutsiwa M; Harkins, April L; Tran, Chieu D

    2013-11-01

    Hydroxyapatite (HAp) is often used as a bone-implant material because it is biocompatible and osteoconductive. However, HAp possesses poor rheological properties and it is inactive against disease-causing microbes. To improve these properties, we developed a green method to synthesize multifunctional composites containing: (1) cellulose (CEL) to impart mechanical strength; (2) chitosan (CS) to induce antibacterial activity thereby maintaining a microbe-free wound site; and (3) HAp. In this method, CS and CEL were co-dissolved in an ionic liquid (IL) and then regenerated from water. HAp was subsequently formed in situ by alternately soaking [CEL+CS] composites in aqueous solutions of CaCl2 and Na2 HPO4 . At least 88% of IL used was recovered for reuse by distilling the aqueous washings of [CEL+CS]. The composites were characterized using FTIR, XRD, and SEM. These composites retained the desirable properties of their constituents. For example, the tensile strength of the composites was enhanced 1.9 times by increasing CEL loading from 20% to 80%. Incorporating CS in the composites resulted in composites which inhibited the growth of both Gram positive (MRSA, S. aureus and VRE) and Gram negative (E. coli and P. aeruginosa) bacteria. These findings highlight the potential use of [CEL+CS+HAp] composites as scaffolds in bone tissue engineering.

  13. FACILE SYNTHESIS, CHARACTERIZATION AND ANTIMICROBIAL ACTIVITY OF CELLULOSE-CHITOSAN-HYDROXYAPATITE COMPOSITE MATERIAL, A POTENTIAL MATERIAL FOR BONE TISSUE ENGINEERING

    PubMed Central

    Mututuvari, Tamutsiwa M.; Harkins, April L.

    2013-01-01

    Hydroxyapatite (HAp) is often used as a bone-implant material because it is biocompatible and osteoconductive. However, HAp possesses poor rheological properties and it is inactive against disease-causing microbes. To improve these properties, we developed a green method to synthesize multifunctional composites containing: (1) cellulose (CEL) to impart mechanical strength; (2) chitosan (CS) to induce antibacterial activity thereby maintaining a microbe-free wound site; and (3) HAp. In this method, CS and CEL were co-dissolved in an ionic liquid (IL) and then regenerated from water. HAp was subsequently formed in situ by alternately soaking [CEL+CS] composites in aqueous solutions of CaCl2 and Na2HPO4. At least 88% of IL used was recovered for reuse by distilling the aqueous washings of [CEL+CS]. The composites were characterized using FTIR, XRD and SEM. These composites retained the desirable properties of their constituents. For example, the tensile strength of the composites was enhanced 1.9X by increasing CEL loading from 20% to 80%. Incorporating CS in the composites resulted in composites which inhibited the growth of both Gram positive (MRSA, S. aureus and VRE) and Gram negative (E. coli and P. aeruginosa) bacteria. These findings highlight the potential use of [CEL+CS+HAp] composites as scaffolds in bone tissue engineering. PMID:23595871

  14. Recognition of wall materials through active thermography coupled with numerical simulations.

    PubMed

    Pietrarca, Francesca; Mameli, Mauro; Filippeschi, Sauro; Fantozzi, Fabio

    2016-09-01

    In the framework of historical buildings, wall thickness as well as wall constituents are not often known a priori, and active IR thermography can be exploited as a nonintrusive method for detecting what kind of material lies beneath the external plaster layer. In the present work, the wall of a historical building is subjected to a heating stimulus, and the surface temperature temporal trend is recorded by an IR camera. A hybrid numerical model is developed in order to simulate the transient thermal response of a wall made of different known materials underneath the plaster layer. When the numerical thermal contrast and the appearance time match with the experimental thermal images, the material underneath the plaster can be qualitatively identified. PMID:27607254

  15. Study of passive and active optical waveguides: Synthesis, processing and characterization of materials

    NASA Astrophysics Data System (ADS)

    Yoshida, Makoto

    Photonics uses photons for information and image processing, and has been touted as the technology of the 21 st century. An optical waveguide is a key component of an optical integrated circuit which is the optical analog of an electrical integrated circuit (IC). Electrical transistor IC technology resulted in an enormous impact on society, and it changed our life styles from the age of the vacuum tube. The advent of the optical integrated circuit is expected to have the same impact on society as the electronic IC. Various optical circuit elements are interrelated to materials, therefore, the study and the better understanding of materials and processing have been receiving a great deal of attention. My research focuses on the study of optical waveguide materials and their processings in terms of passive and active optical waveguides. The first target was to establish a method for measuring the refractive index and optical propagation loss of optical waveguides. The second target was to develop passive waveguide materials which can route, split and combine optical signals on a substrate. There are several requirements for waveguiding, such as high optical transparency, proper refractive index, and proper thickness. The sol-gel technique was used to meet the requirements, and several types of organic: inorganic composite materials were developed. The third target involved the development of processing methods to fabricate channel waveguides using the above-mentioned passive and active waveguide materials. Selective laser densification was developed for sol-gel composite materials. Use of trenched substrates and photobleaching were also studied. The last target was to develop an active material which could process optical signals using the electrooptic effect. A crosslinked urethane polymer with a newly synthesized chromophore was used due to its high thermal stability and optical transparency. In order to obtain second order nonlinearity, macroscopic molecular

  16. Broad spectrum antibacterial and antifungal polymeric paint materials: synthesis, structure-activity relationship, and membrane-active mode of action.

    PubMed

    Hoque, Jiaul; Akkapeddi, Padma; Yadav, Vikas; Manjunath, Goutham B; Uppu, Divakara S S M; Konai, Mohini M; Yarlagadda, Venkateswarlu; Sanyal, Kaustuv; Haldar, Jayanta

    2015-01-28

    Microbial attachment and subsequent colonization onto surfaces lead to the spread of deadly community-acquired and hospital-acquired (nosocomial) infections. Noncovalent immobilization of water insoluble and organo-soluble cationic polymers onto a surface is a facile approach to prevent microbial contamination. In the present study, we described the synthesis of water insoluble and organo-soluble polymeric materials and demonstrated their structure-activity relationship against various human pathogenic bacteria including drug-resistant strains such as methicillin-resistant Staphylococcus aureus (MRSA), vancomycin-resistant enterococci (VRE), and beta lactam-resistant Klebsiella pneumoniae as well as pathogenic fungi such as Candida spp. and Cryptococcus spp. The polymer coated surfaces completely inactivated both bacteria and fungi upon contact (5 log reduction with respect to control). Linear polymers were more active and found to have a higher killing rate than the branched polymers. The polymer coated surfaces also exhibited significant activity in various complex mammalian fluids such as serum, plasma, and blood and showed negligible hemolysis at an amount much higher than minimum inhibitory amounts (MIAs). These polymers were found to have excellent compatibility with other medically relevant polymers (polylactic acid, PLA) and commercial paint. The cationic hydrophobic polymer coatings disrupted the lipid membrane of both bacteria and fungi and thus showed a membrane-active mode of action. Further, bacteria did not develop resistance against these membrane-active polymers in sharp contrast to conventional antibiotics and lipopeptides, thus the polymers hold great promise to be used as coating materials for developing permanent antimicrobial paint. PMID:25541751

  17. Broad spectrum antibacterial and antifungal polymeric paint materials: synthesis, structure-activity relationship, and membrane-active mode of action.

    PubMed

    Hoque, Jiaul; Akkapeddi, Padma; Yadav, Vikas; Manjunath, Goutham B; Uppu, Divakara S S M; Konai, Mohini M; Yarlagadda, Venkateswarlu; Sanyal, Kaustuv; Haldar, Jayanta

    2015-01-28

    Microbial attachment and subsequent colonization onto surfaces lead to the spread of deadly community-acquired and hospital-acquired (nosocomial) infections. Noncovalent immobilization of water insoluble and organo-soluble cationic polymers onto a surface is a facile approach to prevent microbial contamination. In the present study, we described the synthesis of water insoluble and organo-soluble polymeric materials and demonstrated their structure-activity relationship against various human pathogenic bacteria including drug-resistant strains such as methicillin-resistant Staphylococcus aureus (MRSA), vancomycin-resistant enterococci (VRE), and beta lactam-resistant Klebsiella pneumoniae as well as pathogenic fungi such as Candida spp. and Cryptococcus spp. The polymer coated surfaces completely inactivated both bacteria and fungi upon contact (5 log reduction with respect to control). Linear polymers were more active and found to have a higher killing rate than the branched polymers. The polymer coated surfaces also exhibited significant activity in various complex mammalian fluids such as serum, plasma, and blood and showed negligible hemolysis at an amount much higher than minimum inhibitory amounts (MIAs). These polymers were found to have excellent compatibility with other medically relevant polymers (polylactic acid, PLA) and commercial paint. The cationic hydrophobic polymer coatings disrupted the lipid membrane of both bacteria and fungi and thus showed a membrane-active mode of action. Further, bacteria did not develop resistance against these membrane-active polymers in sharp contrast to conventional antibiotics and lipopeptides, thus the polymers hold great promise to be used as coating materials for developing permanent antimicrobial paint.

  18. Design Brief--Packaging: More than Just a Box! Communications: Getting the Message across with Advertising. Technology Learning Activities.

    ERIC Educational Resources Information Center

    Technology Teacher, 1991

    1991-01-01

    Each technology learning activity in this article includes content description, objectives, required materials, challenge, and evaluation questions. Subjects are designing product packages and communication through advertising. (SK)

  19. Electrodes and electrochemical storage cells utilizing tin-modified active materials

    DOEpatents

    Anani, Anaba; Johnson, John; Lim, Hong S.; Reilly, James; Schwarz, Ricardo; Srinivasan, Supramaniam

    1995-01-01

    An electrode has a substrate and a finely divided active material on the substrate. The active material is ANi.sub.x-y-z Co.sub.y Sn.sub.z, wherein A is a mischmetal or La.sub.1-w M.sub.w, M is Ce, Nd, or Zr, w is from about 0.05 to about 1.0, x is from about 4.5 to about 5.5, y is from 0 to about 3.0, and z is from about 0.05 to about 0.5. An electrochemical storage cell utilizes such an electrode as the anode. The storage cell further has a cathode, a separator between the cathode and the anode, and an electrolyte.

  20. Assessment of alpha activity of building materials commonly used in West Bengal, India.

    PubMed

    Ghosh, Dipak; Deb, Argha; Bera, Sukumar; Sengupta, Rosalima; Patra, Kanchan Kumar

    2008-02-01

    This paper, reports for the first time, an extensive study of alpha activity of all widely used building materials (plaster of Paris, stone chips, marble, white cement, mosaic stone, limestone, sand, granite, cement brick, asbestos, red brick, cement tile, ceramic tile and ceramics) in West Bengal, India. The alpha activities have been measured using Solid State Nuclear Track Detector (SSNTD), a very sensitive detector for alpha particles. The samples were collected from local markets of Kolkata. The measured average alpha activities ranged from 22.7+/-2.5 to 590.6+/-16.8Bqkg(-1). The alpha activity of ceramic tiles was highest and provides additional data to estimate the effect of environmental radiation exposure on human health.

  1. Structural materials for fusion power reactors—the RF R&D activities

    NASA Astrophysics Data System (ADS)

    Chernov, V. M.; Leonteva-Smirnova, M. V.; Potapenko, M. M.; Budylkin, N. I.; Devyatko, Yu. N.; Ioltoukhovskiy, A. G.; Mironova, E. G.; Shikov, A. K.; Sivak, A. B.; Yermolaev, G. N.; Kalashnikov, A. N.; Kuteev, B. V.; Blokhin, A. I.; Loginov, N. I.; Romanov, V. A.; Belyakov, V. A.; Kirillov, I. R.; Bulanova, T. M.; Golovanov, V. N.; Shamardin, V. K.; Strebkov, Yu. S.; Tyumentsev, A. N.; Kardashev, B. K.; Mishin, O. V.; Vasiliev, B. A.

    2007-08-01

    Recent progress in the RF low activation structural materials R&D road map towards DEMO via the FBR tests (BOR-60, BN-600, BN-800) and the TBM tests in ITER is overviewed. The properties of the RAFMS RUSFER-EK-181 (Fe-12Cr-2W-Ta-V-B-C) and the V-4Ti-4Cr alloys are presented. The next important steps include further studies on the influence of high dose and high-temperature irradiation on the properties of base structural materials and joints. Activation, transmutation and radiation damage of the materials in BN-600 and DEMO-RF (Kurchatov Institute project) neutron spectra are calculated. The results of the application of the internal friction (ultrasonic) non-destructive method to research the DBTT are in good agreement with the results of the destructive impact method. The important influence of boron on the heat resistance of materials and the He concentration level under irradiation are calculated. The new special regimes of the heat treatments of the alloys are suggested to widen the temperature windows of the applications. The results of the BOR-60 examinations of RUSFER-EK-181 (irradiation temperature 320-340 °C and doses up to 15 dpa) are presented. The BN-600 projects for the high dose and high-temperature irradiation tests of manufactured alloys are presented.

  2. Recent progress in blanket materials development in the Broader Approach activities

    NASA Astrophysics Data System (ADS)

    Nishitani, T.; Tanigawa, H.; Nozawa, T.; Jitsukawa, S.; Nakamichi, M.; Hoshino, T.; Yamanishi, T.; Baluc, N.; Möslang, A.; Lindou, R.; Tosti, S.; Hodgson, E. R.; Clement Lorenzo, S.; Kohyama, A.; Kimura, A.; Shikama, T.; Hayashi, K.; Araki, M.

    2011-10-01

    As a part of the Broader Approach activities, R&D on blanket related materials, reduced-activation ferritic martensitic (RAFM) steels as a structural material, SiC f/SiC composites for flow channel insert in the liquid blanket and/or use as advanced structural material, advanced tritium breeders and neutron multiplier, has been initiated directed at DEMO. As part of the RAFM steel mass production development, a 5 ton heat of RAFM steel (F82H) was procured by Electro Slag Re-melting as the secondary melting method, which was effective in controlling unwanted impurities. An 11 ton heat of EUROFER was also produced. For the SiC f/SiC composite development, NITE- and CVI-SiC f/SiC composites were prepared as reference materials and preliminary mechanical and physical properties were measured. Also compatibility tests between SiC and Pb-17Li have been prepared, related to the He-cooled Li-Pb blanket concept. For the beryllide neutron multiplayer Be-Ti alloy development, large size rods of about 30 mm diameter were fabricated successfully in EU.

  3. Verification of cardiac mechanics software: benchmark problems and solutions for testing active and passive material behaviour

    PubMed Central

    Gurev, Viatcheslav; Arens, Sander; Augustin, Christoph M.; Baron, Lukas; Blake, Robert; Bradley, Chris; Castro, Sebastian; Crozier, Andrew; Favino, Marco; Fastl, Thomas E.; Fritz, Thomas; Gao, Hao; Gizzi, Alessio; Griffith, Boyce E.; Hurtado, Daniel E.; Krause, Rolf; Luo, Xiaoyu; Nash, Martyn P.; Pezzuto, Simone; Plank, Gernot; Rossi, Simone; Ruprecht, Daniel; Seemann, Gunnar; Smith, Nicolas P.; Sundnes, Joakim; Rice, J. Jeremy; Trayanova, Natalia; Wang, Dafang; Jenny Wang, Zhinuo; Niederer, Steven A.

    2015-01-01

    Models of cardiac mechanics are increasingly used to investigate cardiac physiology. These models are characterized by a high level of complexity, including the particular anisotropic material properties of biological tissue and the actively contracting material. A large number of independent simulation codes have been developed, but a consistent way of verifying the accuracy and replicability of simulations is lacking. To aid in the verification of current and future cardiac mechanics solvers, this study provides three benchmark problems for cardiac mechanics. These benchmark problems test the ability to accurately simulate pressure-type forces that depend on the deformed objects geometry, anisotropic and spatially varying material properties similar to those seen in the left ventricle and active contractile forces. The benchmark was solved by 11 different groups to generate consensus solutions, with typical differences in higher-resolution solutions at approximately 0.5%, and consistent results between linear, quadratic and cubic finite elements as well as different approaches to simulating incompressible materials. Online tools and solutions are made available to allow these tests to be effectively used in verification of future cardiac mechanics software. PMID:26807042

  4. Nanostructured p-type semiconducting transparent oxides: promising materials for nano-active devices and the emerging field of "transparent nanoelectronics".

    PubMed

    Banerjee, Arghya; Chattopadhyay, Kalyan K

    2008-01-01

    Transparent conducting oxides (TCO) with p-type semiconductivity have recently gained renewed interest for the fabrication of all-oxide transparent junctions, having potential applications in the emerging field of 'Transparent' or 'Invisible Electronics'. This kind of transparent junctions can be used as a "functional" window, which will transmit visible portion of solar radiation, but generates electricity by the absorption of the UV part. Therefore, these devices can be used as UV shield as well as UV cells. In this report, a brief review on the research activities on various p-TCO materials is furnished along-with the fabrication of different transparent p-n homojunction, heterojunction and field-effect transistors. Also the reason behind the difficulties in obtaining p-TCO materials and possible solutions are discussed in details. Considerable attention is given in describing the various patent generations on the field of p-TCO materials as well as transparent p-n junction diodes and light emitting devices. Also, most importantly, a detailed review and patenting activities on the nanocrystalline p-TCO materials and transparent nano-active device fabrication are furnished with considerable attention. And finally, a systematic description on the fabrication and characterization of nanocrystalline, p-type transparent conducting CuAlO(2) thin film, deposited by cost-effective low-temperature DC sputtering technique, by our group, is furnished in details. These p-TCO micro/nano-materials have wide range of applications in the field of optoelectronics, nanoelectronics, space sciences, field-emission displays, thermoelectric converters and sensing devices. PMID:19076042

  5. Photo-induced optical activity in phase-change memory materials.

    PubMed

    Borisenko, Konstantin B; Shanmugam, Janaki; Williams, Benjamin A O; Ewart, Paul; Gholipour, Behrad; Hewak, Daniel W; Hussain, Rohanah; Jávorfi, Tamás; Siligardi, Giuliano; Kirkland, Angus I

    2015-03-05

    We demonstrate that optical activity in amorphous isotropic thin films of pure Ge2Sb2Te5 and N-doped Ge2Sb2Te5N phase-change memory materials can be induced using rapid photo crystallisation with circularly polarised laser light. The new anisotropic phase transition has been confirmed by circular dichroism measurements. This opens up the possibility of controlled induction of optical activity at the nanosecond time scale for exploitation in a new generation of high-density optical memory, fast chiroptical switches and chiral metamaterials.

  6. Determination of sodium in biological materials by instrumental neutron activation analysis.

    PubMed

    Cunningham, W C; Capar, S G; Anderson, D L

    1997-01-01

    A formalized method for determining sodium in biological materials by instrumental neutron activation analysis is presented. The method includes common procedures from the numerous options available to this historically nonformalized analytical technique. The number of procedural options is restricted to minimize the method's complexity, yet the method is still applicable to a variety of neutron activation facilities. High accuracy and precision are achieved by placing bounds on allowed uncertainty at critical stages of the analysis. Analytical results from the U.S. Food and Drug Administration laboratory and 4 other laboratories demonstrate the method's performance.

  7. Studies on Supercapacitor Electrode Material from Activated Lignin-Derived Mesoporous Carbon

    SciTech Connect

    Saha, Dipendu; Li, Yunchao; Bi, Zhonghe; Chen, Jihua; Keum, Jong Kahk; Hensley, Dale K; Grappe, Hippolyte A.; Meyer III, Harry M; Dai, Sheng; Paranthaman, Mariappan Parans; Naskar, Amit K

    2014-01-01

    We synthesized mesoporous carbon from pre-cross-linked lignin gel impregnated with a surfactant as the pore-forming agent, and then activated the carbon through physical and chemical methods to obtain activated mesoporous carbon. The activated mesoporous carbons exhibited 1.5- to 6-fold increases in porosity with a maximum BET specific surface area of 1148 m2/g and a pore volume of 1.0 cm3/g. Slow physical activation helped retain dominant mesoporosity; however, aggressive chemical activation caused some loss of the mesopore volume fraction. Plots of cyclic voltammetric data with the capacitor electrode made from these carbons showed an almost rectangular curve depicting the behavior of ideal double-layer capacitance. Although the pristine mesoporous carbon exhibited the same range of surface-area-based capacitance as that of other known carbon-based supercapacitors, activation decreased the surface-area-based specific capacitance and increased the gravimetric-specific capacitance of the mesoporous carbons. Surface activation lowered bulk density and electrical conductivity. Warburg impedance as a vertical tail in the lower frequency domain of Nyquist plots supported good supercapacitor behavior for the activated mesoporous carbons. Our work demonstrated that biomass-derived mesoporous carbon materials continue to show potential for use in specific electrochemical applications.

  8. Estrogenic activity of dental materials and bisphenol-A related chemicals in vitro.

    PubMed

    Hashimoto, Y; Nakamura, M

    2000-09-01

    Twenty-eight chemicals used as dental materials and bisphenol-A related chemicals were diluted with DMSO to concentrations ranging from 10(-7) to 10(-3) M and tested for estrogenicity. Bisphenol-A (BPA), bisphenol-F (BPF) and bisphenol-A-bischloroformate (BPACF) showed estrogenic activity using the yeast two-hybrid system, and BPA, BPF, BPACF and bisphenol-S (BPS) showed estrogenic activity using the fluorescence polarization system. However, none of the remaining chemicals and none of the dental materials showed any activity at concentrations between 10(-7) and 10(-3) M. Although BPA, BPF, BPACF, bisphenol-A-dimethacrylate and BPS showed estrogenic activity in the E-screen test, the remaining chemicals did not. Thus, most of the chemicals showed consistent results, either positive or negative, by the three testing methods, while two chemicals showed conflicting results. Further studies, together with in vivo and epidemiological examinations, are required. Elucidation of the structure-activity relationships of these chemicals is also needed to estimate the estrogenicity of a chemical from its structure.

  9. High-resolution magic angle spinning description of the interaction states and their kinetics among basic solutes and functionalized silica materials.

    PubMed

    Lopez, Claire; Carrara, Caroline; Tchapla, Alain; Caldarelli, Stefano

    2013-12-20

    Modeling of the interaction is crucial to understanding and predicting chromatography. However, the complexity and variety of the grafted motifs render the creation of an accurate model overwhelmingly challenging, so that most often the classification of column separation properties is described by monitoring the retention times of carefully selected control molecules. We analyzed here the characteristics of the interplay of compounds of basic nature by (1)H HRMAS NMR, which provide relevant descriptors for products with pharmaceutical properties, with chromatographic phases for Reversed Phase Liquid Chromatography. Eight grafted silica phases were selected, differing to enhance specific structural properties (monomeric and polymeric grafts, endcapping or not, carbon content, alkyl with polar embedded group or alkyl bonded chain, chemical nature of end capping, native silica). These materials were put in interaction with five basic molecules, previously chosen as probes for the evaluation of efficient base deactivated liquid stationary phases using five theoretical molecular descriptors to cover a large scale of molecular volume, polar surface area, LogP, hydrogen-bond donor capacity and finally hydrogen-bond acceptor capacity. (1)H HRMAS NMR was capable of describing qualitatively a wealth of interaction states, characterized both thermodynamically and kinetically. In one case (penbutolol) up to five interaction states could be differentiated. Variable temperature experiments revealed the complexity of the retention process on grafted silica as in some cases the kinetics of the interaction is shown to slow down on increasing the temperature.

  10. DESCRIPTION OF TWO NEW MONOECIOUS SPECIES OF VOLVOX SECT. VOLVOX (VOLVOCACEAE, CHLOROPHYCEAE), BASED ON COMPARATIVE MORPHOLOGY AND MOLECULAR PHYLOGENY OF CULTURED MATERIAL(1).

    PubMed

    Isaka, Nanako; Kawai-Toyooka, Hiroko; Matsuzaki, Ryo; Nakada, Takashi; Nozaki, Hisayoshi

    2012-06-01

    Species of Volvox sect. Volvox (Volvocaceae, Chlorophyceae) are unique because they have thick cytoplasmic bridges between somatic cells and spiny-walled zygotes. This section is taxonomically important because the genus Volvox is polyphyletic. However, taxonomic studies of species in Volvox sect. Volvox have not been carried out on cultured material. Here, we performed a taxonomic study of monoecious species of Volvox sect. Volvox based on the comparative morphology and molecular phylogeny of chloroplast genes and the internal transcribed spacer (ITS) regions of nuclear rDNA using various strains originating from Japan and two preserved strains from the USA. The strains were clearly divided into four species, V. globator L., V. barberi W. Shaw, V. kirkiorum sp. nov., and V. ferrisii sp. nov., on the basis of differences in numbers of zygotes (eggs) in the sexual spheroids, form of zygote wall, and somatic cell shape. Sequences for ITS of nuclear rDNA resolved that the two new species have phylogenetic positions separated from V. globator, V. barberi, V. capensis F. Rich et Pocock, and V. rousseletii G. S. West UTEX 1862 within Volvox sect. Volvox. PMID:27011093

  11. FY 2012 Lightweight Materials Annual Report

    SciTech Connect

    Warren, David C.

    2013-04-15

    The FY 2012 Annual Progress Report for Lightweight Materials provides a detailed description of the activities and technical accomplishments which focuses on the development and validation of advanced materials and manufacturing technologies to significantly reduce light and heavy duty vehicle weight without compromising other attributes such as safety, performance, recyclability, and cost.

  12. Using Photon Activation Analysis To Determine Concentrations Of Unknown Components In Reference Materials

    SciTech Connect

    Green, Jaromy; Sun, Zaijing; Wells, Doug; Maschner, Herb

    2011-06-01

    Using certified multi-element reference materials for instrumental analyses one frequently is confronted with the embarrassing fact that the concentration of some desired elements are not given in the respective certificate, nonetheless are detectable, e.g. by photon activation analysis (PAA). However, these elements might be determinable with sufficient quality of the results using scaling parameters and the well-known quantities of a reference element within the reference material itself. Scaling parameters include: activation threshold energy, Giant Dipole Resonance (GDR) peak and endpoint energy of the bremsstrahlung continuum; integrated photo-nuclear cross sections for the isotopes of the reference element; bremsstrahlung continuum integral; target thickness; photon flux density. Photo-nuclear cross sections from the unreferenced elements must be known, too. With these quantities, the integral was obtained for both the known and unknown elements resulting in an inference of the concentration of the unreported element based upon the reported value, thus also the concentration of the unreferenced element in the reference material. A similar method to determine elements using the basic nuclear and experimental data has been developed for thermal neutron activation analysis some time ago (k{sub 0} Method).

  13. Mutagenicity studies in a tyre plant: in vitro activity of workers' urinary concentrates and raw materials.

    PubMed

    Crebelli, R; Paoletti, A; Falcone, E; Aquilina, G; Fabri, G; Carere, A

    1985-07-01

    The possible contribution to urinary mutagenicity of occupational exposures in the rubber industry was studied by assaying the urine concentrates of 72 workmen (44 smokers) employed in a tyre plant. Twenty three clerks (16 smokers) engaged in the administrative department of the same factory served as presumptive unexposed controls. XAD-2 resin concentrates of urine samples were assayed in the plate incorporation test and in the microtitre fluctuation assay with Salmonella typhimurium strains TA1535, TA98, and TA100. Furthermore, the in vitro mutagenicity of the major raw materials in use at the plant was determined in the plate incorporation assay with S typhimurium strains TA1535, TA1537, TA98, and TA100. The results obtained from the urinary mutagenicity study show that smoking habits, but not occupation, were statistically significantly related to the appearance of a urinary mutagenicity that was detectable with strain TA98. A possible synergistic effect of occupation with smoking was observed among tyre builders who were also smokers. The study of the raw materials showed that three technical grade materials were weakly active as mutagens in strain TA98 in the absence (poly-p-dinitrosobenzene) or in the presence of metabolic activation (mixed diaryl-p-phenylendiamines and tetramethyltiuram disulphide). The latter chemical was also weakly active in strain TA100. PMID:4015996

  14. Alkali-Activated Aluminium-Silicate Composites as Insulation Materials for Industrial Application

    NASA Astrophysics Data System (ADS)

    Dembovska, L.; Bajare, D.; Pundiene, I.; Bumanis, G.

    2015-11-01

    The article reports on the study of thermal stability of alkali-activated aluminium- silicate composites (ASC) at temperature 800-1100°C. ASC were prepared by using calcined kaolinite clay, aluminium scrap recycling waste, lead-silicate glass waste and quartz sand. As alkali activator, commercial sodium silicate solution modified with an addition of sodium hydroxide was used. The obtained alkali activation solution had silica modulus Ms=1.67. Components of aluminium scrap recycling waste (aluminium nitride (AlN) and iron sulphite (FeSO3)) react in the alkali media and create gases - ammonia and sulphur dioxide, which provide the porous structure of the material [1]. Changes in the chemical composition of ASC during heating were identified and quantitatively analysed by using DTA/TG, dimension changes during the heating process were determined by using HTOM, pore microstructure was examined by SEM, and mineralogical composition of ASC was determined by XRD. The density of ASC was measured in accordance with EN 1097-7. ASC with density around 560 kg/m3 and heat resistance up to 1100°C with shrinkage less than 5% were obtained. The intended use of this material is the application as an insulation material for industrial purposes at elevated temperatures.

  15. Critical Dimensions of Water-tamped Slabs and Spheres of Active Material

    DOE R&D Accomplishments Database

    Greuling, E.; Argo, H.: Chew, G.; Frankel, M. E.; Konopinski, E.J.; Marvin, C.; Teller, E.

    1946-08-06

    The magnitude and distribution of the fission rate per unit area produced by three energy groups of moderated neutrons reflected from a water tamper into one side of an infinite slab of active material is calculated approximately in section II. This rate is directly proportional to the current density of fast neutrons from the active material incident on the water tamper. The critical slab thickness is obtained in section III by solving an inhomogeneous transport integral equation for the fast-neutron current density into the tamper. Extensive use is made of the formulae derived in "The Mathematical Development of the End-Point Method" by Frankel and Goldberg. In section IV slight alterations in the theory outlined in sections II and III were made so that one could approximately compute the critical radius of a water-tamper sphere of active material. The derived formulae were applied to calculate the critical dimensions of water-tamped slabs and spheres of solid UF{sub 6} leaving various (25) isotope enrichment fractions. Decl. Dec. 16, 1955.

  16. Using Electronic Neutron Generators in Active Interrogation to Detect Shielded Fissionable Material

    SciTech Connect

    D. L. Chichester; E. H. Seabury

    2008-10-01

    Experiments have been performed at Idaho National Laboratory to study methodology and instrumentation for performing neutron active interrogation die-away analyses for the purpose of detecting shielded fissionable material. Here we report initial work using a portable DT electronic neutron generator with a He-3 fast neutron detector to detect shielded fissionable material including >2 kg quantities of enriched uranium and plutonium. Measurements have been taken of bare material as well as of material hidden within a large plywood cube. Results from this work have demonstrated the efficacy of the die-away neutron measurement technique for quickly detecting the presence of special nuclear material hidden within plywood shields by analyzing the time dependent neutron signals in-between neutron generator pulses. Using a DT electronic neutron generator operating at 300 Hz with a yield of approximately 0.36 x 10**8 neutrons per second, 2.2 kg of enriched uranium hidden within a 0.60 m x 0.60 m x 0.70 m volume of plywood was positively detected with a measurement signal 2-sigma above the passive background within 1 second. Similarly, for a 500 second measurement period a lower detection limit of approaching the gram level could be expected with the same simple set-up.

  17. Short communication: Effect of active food packaging materials on fluid milk quality and shelf life.

    PubMed

    Wong, Dana E; Goddard, Julie M

    2014-01-01

    Active packaging, in which active agents are embedded into or on the surface of food packaging materials, can enhance the nutritive value, economics, and stability of food, as well as enable in-package processing. In one embodiment of active food packaging, lactase was covalently immobilized onto packaging films for in-package lactose hydrolysis. In prior work, lactase was covalently bound to low-density polyethylene using polyethyleneimine and glutaraldehyde cross-linkers to form the packaging film. Because of the potential contaminants of proteases, lipases, and spoilage organisms in typical enzyme preparations, the goal of the current work was to determine the effect of immobilized-lactase active packaging technology on unanticipated side effects, such as shortened shelf-life and reduced product quality. Results suggested no evidence of lipase or protease activity on the active packaging films, indicating that such active packaging films could enable in-package lactose hydrolysis without adversely affecting product quality in terms of dairy protein or lipid stability. Storage stability studies indicated that lactase did not migrate from the film over a 49-d period, and that dry storage resulted in 13.41% retained activity, whereas wet storage conditions enabled retention of 62.52% activity. Results of a standard plate count indicated that the film modification reagents introduced minor microbial contamination; however, the microbial population remained under the 20,000 cfu/mL limit through the manufacturer's suggested 14-d storage period for all film samples. This suggests that commercially produced immobilized lactase active packaging should use purified cross-linkers and enzymes. Characterization of unanticipated effects of active packaging on food quality reported here is important in demonstrating the commercial potential of such technologies. PMID:24239074

  18. Short communication: Effect of active food packaging materials on fluid milk quality and shelf life.

    PubMed

    Wong, Dana E; Goddard, Julie M

    2014-01-01

    Active packaging, in which active agents are embedded into or on the surface of food packaging materials, can enhance the nutritive value, economics, and stability of food, as well as enable in-package processing. In one embodiment of active food packaging, lactase was covalently immobilized onto packaging films for in-package lactose hydrolysis. In prior work, lactase was covalently bound to low-density polyethylene using polyethyleneimine and glutaraldehyde cross-linkers to form the packaging film. Because of the potential contaminants of proteases, lipases, and spoilage organisms in typical enzyme preparations, the goal of the current work was to determine the effect of immobilized-lactase active packaging technology on unanticipated side effects, such as shortened shelf-life and reduced product quality. Results suggested no evidence of lipase or protease activity on the active packaging films, indicating that such active packaging films could enable in-package lactose hydrolysis without adversely affecting product quality in terms of dairy protein or lipid stability. Storage stability studies indicated that lactase did not migrate from the film over a 49-d period, and that dry storage resulted in 13.41% retained activity, whereas wet storage conditions enabled retention of 62.52% activity. Results of a standard plate count indicated that the film modification reagents introduced minor microbial contamination; however, the microbial population remained under the 20,000 cfu/mL limit through the manufacturer's suggested 14-d storage period for all film samples. This suggests that commercially produced immobilized lactase active packaging should use purified cross-linkers and enzymes. Characterization of unanticipated effects of active packaging on food quality reported here is important in demonstrating the commercial potential of such technologies.

  19. Incorporation of inorganic material in anoxic/aerobic-activated sludge system mixed liquor.

    PubMed

    Wentzel, M C; Ubisi, M F; Lakay, M T; Ekama, G A

    2002-12-01

    In the bioreactor of the nitrification denitrification (ND)-activated sludge system, the mixed liquor is made up of organic and inorganic materials. In the current design procedures and simulation models, the influent wastewater characteristics and biological processes that influence the bioreactor mixed liquor organic solids (as volatile suspended solids, VSS, or COD) are explicitly included. However, the mixed liquor total suspended solids (TSS, i.e. organic + inorganic solids) are calculated simply from empirical ratios of VSS/TSS. The TSS concentration is fundamental in the design of secondary settling tanks and waste activated sludge disposal. Clearly, the empirical approach to obtaining an estimate for TSS is not satisfactory within the framework of a fundamentally based model. Accordingly, the incorporation of the inorganic material present in the influent wastewater into ND-activated sludge system mixed liquor was investigated. From an experimental investigation into the distribution of inorganics in the influent, mixed liquor and effluent of a laboratory-scale ND-activated sludge system, it was concluded inter alia that (i) of the total inorganic solids in the influent, only a small fraction (2.8-7.5%) is incorporated into the mixed liquor, (ii) most of the inorganics in the influent (mean 88%) and effluent (mean 98.5%) are in the dissolved form, the balance being particulate, and (iii) the influent and effluent inorganic dissolved solids concentrations are closely equal (mean effluent to influent ratio 100%). Further, a number of models were developed to quantify the mixed liquor inorganic, and, hence, total solids. From an evaluation of these models against the experimental data, it would appear that the best approach to model the incorporation of inorganics into the activated sludge mixed liquor is to follow the concepts and principles used to develop the existing models for organic materials. With this approach, reasonably close correlation between

  20. Assessment of Uncertainty in the Determination of Activation Energy for Polymeric Materials

    NASA Technical Reports Server (NTRS)

    Darby, Stephania P.; Landrum, D. Brian; Coleman, Hugh W.

    1998-01-01

    An assessment of the experimental uncertainty in obtaining the kinetic activation energy from thermogravimetric analysis (TGA) data is presented. A neat phenolic resin, Borden SC1O08, was heated at three heating rates to obtain weight loss vs temperature data. Activation energy was calculated by two methods: the traditional Flynn and Wall method based on the slope of log(q) versus 1/T, and a modification of this method where the ordinate and abscissa are reversed in the linear regression. The modified method produced a more accurate curve fit of the data, was more sensitive to data nonlinearity, and gave a value of activation energy 75 percent greater than the original method. An uncertainty analysis using the modified method yielded a 60 percent uncertainty in the average activation energy. Based on this result, the activation energy for a carbon-phenolic material was doubled and used to calculate the ablation rate In a typical solid rocket environment. Doubling the activation energy increased surface recession by 3 percent. Current TGA data reduction techniques that use the traditional Flynn and Wall approach to calculate activation energy should be changed to the modified method.

  1. Fluidisation and plastic activity in a model soft-glassy material flowing in micro-channels with rough walls

    NASA Astrophysics Data System (ADS)

    Scagliarini, A.; Lulli, M.; Sbragaglia, M.; Bernaschi, M.

    2016-06-01

    By means of mesoscopic numerical simulations of a model soft-glassy material, we investigate the role of boundary roughness on the flow behaviour of the material, probing the bulk/wall and global/local rheologies. We show that the roughness reduces the wall slip induced by wettability properties and acts as a source of fluidisation for the material. A direct inspection of the plastic events suggests that their rate of occurrence grows with the fluidity field, reconciling our simulations with kinetic elasto-plastic descriptions of jammed materials. Notwithstanding, we observe qualitative and quantitative differences in the scaling, depending on the distance from the rough wall and on the imposed shear. The impact of roughness on the orientational statistics is also studied.

  2. Impedance spectroscopy study of a catechol-modified activated carbon electrode as active material in electrochemical capacitor

    NASA Astrophysics Data System (ADS)

    Cougnon, C.; Lebègue, E.; Pognon, G.

    2015-01-01

    Modified activated carbon (Norit S-50) electrodes with electrochemical double layer (EDL) capacitance and redox capacitance contributions to the electric charge storage were tested in 1 M H2SO4 to quantify the benefit and the limitation of the surface redox reactions on the electrochemical performances of the resulting pseudo-capacitive materials. The electrochemical performances of an electrochemically anodized carbon electrode and a catechol-modified carbon electrode, which make use both EDL capacitance of the porous structure of the carbon and redox capacitance, were compared to the performances obtained for the pristine carbon. Nitrogen gas adsorption measurements have been used for studying the impact of the grafting on the BET surface area, pore size distribution, pore volume and average pore diameter. The electrochemical behavior of carbon materials was studied by cyclic voltammetry and electrochemical impedance spectroscopy (EIS). The EIS data were discussed by using a complex capacitance model that allows defining the characteristic time constant, the global capacitance and the frequency at which the maximum charge stored is reached. The EIS measurements were achieved at different dc potential values where a redox activity occurs and the evolution of the capacitance and the capacitive relaxation time with the electrode potential are presented. Realistic galvanostatic charge/discharge measurements performed at different current rates corroborate the results obtained by impedance.

  3. Photocatalytic activity of titanium dioxide modified concrete materials - influence of utilizing recycled glass cullets as aggregates.

    PubMed

    Chen, Jun; Poon, Chi-Sun

    2009-08-01

    Combining the use of photocatalysts with cementitious materials is an important development in the field of photocatalytic air pollution mitigation. This paper presents the results of a systematic study on assessing the effectiveness of pollutant degradation by concrete surface layers that incorporate a photocatalytic material - Titanium Dioxide. The photocatalytic activity of the concrete samples was determined by photocatalytic oxidation of nitric oxide (NO) in the laboratory. Recycled glass cullets, derived from crushed waste beverage bottles, were used to replace sand in preparing the concrete surface layers. Factors, which may affect the pollutant removal performance of the concrete layers including glass color, aggregate size and curing age, were investigated. The results show a significant enhancement of the photocatalytic activity due to the use of glass cullets as aggregates in the concrete layers. The samples fabricated with clear glass cullets exhibited threefold NO removal efficiency compared to the samples fabricated with river sand. The light transmittance property of glass was postulated to account for the efficiency improvement, which was confirmed by a separate simulation study. But the influence of the size of glass cullets was not evident. In addition, the photocatalytic activity of concrete surface layers decreased with curing age, showing a loss of 20% photocatalytic activity after 56-day curing. PMID:19540649

  4. Photocatalytic activity of titanium dioxide modified concrete materials - influence of utilizing recycled glass cullets as aggregates.

    PubMed

    Chen, Jun; Poon, Chi-Sun

    2009-08-01

    Combining the use of photocatalysts with cementitious materials is an important development in the field of photocatalytic air pollution mitigation. This paper presents the results of a systematic study on assessing the effectiveness of pollutant degradation by concrete surface layers that incorporate a photocatalytic material - Titanium Dioxide. The photocatalytic activity of the concrete samples was determined by photocatalytic oxidation of nitric oxide (NO) in the laboratory. Recycled glass cullets, derived from crushed waste beverage bottles, were used to replace sand in preparing the concrete surface layers. Factors, which may affect the pollutant removal performance of the concrete layers including glass color, aggregate size and curing age, were investigated. The results show a significant enhancement of the photocatalytic activity due to the use of glass cullets as aggregates in the concrete layers. The samples fabricated with clear glass cullets exhibited threefold NO removal efficiency compared to the samples fabricated with river sand. The light transmittance property of glass was postulated to account for the efficiency improvement, which was confirmed by a separate simulation study. But the influence of the size of glass cullets was not evident. In addition, the photocatalytic activity of concrete surface layers decreased with curing age, showing a loss of 20% photocatalytic activity after 56-day curing.

  5. Effect of gamma irradiation on fluoride release and antibacterial activity of resin dental materials.

    PubMed

    Carvalho, Fabíola Galbiatti de; Fucio, Suzana Beatriz Portugal de; Pascon, Fernanda Miori; Kantovitz, Kamila Rosamilia; Correr-Sobrinho, Lourenço; Puppin-Rontani, Regina Maria

    2009-01-01

    This study evaluated the effect of gamma irradiation on fluoride release and antibacterial activity of FluroShield (FS) and Clearfil Protect Bond (CPB). Four groups were formed: G1-FS + gamma; G2-FS without gamma; G3-CPB + gamma; G4-CPB without gamma. For fluoride release analysis, 12 disks of each material were prepared and covered with nail polish, except for one side (50.4 mm(2) area). G1 and G3 were sterilized with a 14.5 KGy dose at 27 degrees C for 24 h, while G2 and G4 (controls) were not sterilized and were maintained under the same time and temperature conditions. Fluoride release measurements were made in duplicate (n=6) by an ion specific electrode. The antibacterial activity of the CPB and FS against Streptococcus mutans after gamma sterilization was evaluated by the agar-disc diffusion method. The diameter of the zones of microbial growth inhibition was recorded after 48 h. Data were analyzed statistically by ANOVA and Tukey's test (alpha=5%). Gamma sterilization decreased the fluoride release of FS by approximately 50%, while CPB was not affected. There was no statistically significant difference (p>0.05) in the antibacterial effect of CPB between gamma and non-gamma sterilization groups. FS presented no antibacterial activity. Gamma irradiation decreased the fluoride release of FS, but did not affect the antibacterial activity of the studied materials. PMID:19738944

  6. Natural sisal fibers derived hierarchical porous activated carbon as capacitive material in lithium ion capacitor

    NASA Astrophysics Data System (ADS)

    Yang, Zhewei; Guo, Huajun; Li, Xinhai; Wang, Zhixing; Yan, Zhiliang; Wang, Yansen

    2016-10-01

    Lithium-ion capacitor (LIC) is a novel advanced electrochemical energy storage (EES) system bridging gap between lithium ion battery (LIB) and electrochemical capacitor (ECC). In this work, we report that sisal fiber activated carbon (SFAC) was synthesized by hydrothermal treatment followed by KOH activation and served as capacitive material in LIC for the first time. Different particle structure, morphology, specific surface area and heteroatoms affected the electrochemical performance of as-prepared materials and corresponding LICs. When the mass ratio of KOH to char precursor was 2, hierarchical porous structured SFAC-2 was prepared and exhibited moderate specific capacitance (103 F g-1 at 0.1 A g-1), superior rate capability and cyclic stability (88% capacity retention after 5000 cycles at 1 A g-1). The corresponding assembled LIC (LIC-SC2) with optimal comprehensive electrochemical performance, displayed the energy density of 83 Wh kg-1, the power density of 5718 W kg-1 and superior cyclic stability (92% energy density retention after 1000 cycles at 0.5 A g-1). It is worthwhile that the source for activated carbon is a natural and renewable one and the synthesis method is eco-friendly, which facilitate that hierarchical porous activated carbon has potential applications in the field of LIC and other energy storage systems.

  7. Examining porous bio-active glass as a potential osteo-odonto-keratoprosthetic skirt material.

    PubMed

    Huhtinen, Reeta; Sandeman, Susan; Rose, Susanna; Fok, Elsie; Howell, Carol; Fröberg, Linda; Moritz, Niko; Hupa, Leena; Lloyd, Andrew

    2013-05-01

    Bio-active glass has been developed for use as a bone substitute with strong osteo-inductive capacity and the ability to form strong bonds with soft and hard tissue. The ability of this material to enhance tissue in-growth suggests its potential use as a substitute for the dental laminate of an osteo-odonto-keratoprosthesis. A preliminary in vitro investigation of porous bio-active glass as an OOKP skirt material was carried out. Porous glass structures were manufactured from bio-active glasses 1-98 and 28-04 containing varying oxide formulation (1-98, 28-04) and particle size range (250-315 μm for 1-98 and 28-04a, 315-500 μm for 28-04b). Dissolution of the porous glass structure and its effect on pH was measured. Structural 2D and 3D analysis of porous structures were performed. Cell culture experiments were carried out to study keratocyte adhesion and the inflammatory response induced by the porous glass materials. The dissolution results suggested that the porous structure made out of 1-98 dissolves faster than the structures made from glass 28-04. pH experiments showed that the dissolution of the porous glass increased the pH of the surrounding solution. The cell culture results showed that keratocytes adhered onto the surface of each of the porous glass structures, but cell adhesion and spreading was greatest for the 98a bio-glass. Cytokine production by all porous glass samples was similar to that of the negative control indicating that the glasses do not induce a cytokine driven inflammatory response. Cell culture results support the potential use of synthetic porous bio-glass as an OOKP skirt material in terms of limited inflammatory potential and capacity to induce and support tissue ingrowth.

  8. Development of Pupils' Transfer Skills by Means of Hands On Activities with Artisan Materials in Natural Sciences Classes

    ERIC Educational Resources Information Center

    Ciascai, Liliana; Chicinas, Luminita

    2008-01-01

    Hands on activities with artisan materials used in order to realize different practical devices helpful in learning process are one of the most frequently used activity in science classes. Usually, the main strength of these activities are: a deeper learning, an increased motivation of pupils for actively learning and development of practical…

  9. Partially Hydrogenated Graphene Materials Exhibit High Electrocatalytic Activities Related to Unintentional Doping with Metallic Impurities.

    PubMed

    Jankovský, Ondřej; Libánská, Alena; Bouša, Daniel; Sedmidubský, David; Matějková, Stanislava; Sofer, Zdeněk

    2016-06-13

    Partially hydrogenated graphene materials, synthesized by the chemical reduction/hydrogenation of two different graphene oxides using zinc powder in acidic environment or aluminum powder in alkaline environment, exhibit high electrocatalytic activities, as well as electrochemical sensing properties. The starting graphene oxides and the resultant hydrogenated graphenes were characterized in detail. Their electrocatalytic activity was examined in the oxygen reduction reaction, whereas sensing properties towards explosives were tested by using picric acid as a redox probe. Findings indicate that the high electrocatalytic performance originates not only from the hydrogenation of graphene, but also from unintentional contamination of graphene with manganese and other metals during synthesis. A careful evaluation of the obtained data and a detailed chemical analysis are necessary to identify the origin of this anomalous electrocatalytic activity. PMID:27167069

  10. Nomex-derived activated carbon fibers as electrode materials in carbon based supercapacitors

    NASA Astrophysics Data System (ADS)

    Leitner, K.; Lerf, A.; Winter, M.; Besenhard, J. O.; Villar-Rodil, S.; Suárez-García, F.; Martínez-Alonso, A.; Tascón, J. M. D.

    Electrochemical characterization has been carried out for electrodes prepared of several activated carbon fiber samples derived from poly (m-phenylene isophthalamide) (Nomex) in an aqueous solution. Depending on the burn-off due to activation the BET surface area of the carbons was in the order of 1300-2800 m 2 g -1, providing an extensive network of micropores. Their capability as active material for supercapacitors was evaluated by using cyclic voltammetry and impedance spectroscopy. Values for the capacitance of 175 F g -1 in sulfuric acid were obtained. Further on, it was observed that the specific capacitance and the performance of the electrode increase significantly with increasing burn-off degree. We believe that this fact can be attributed to the increase of surface area and porosity with increasing burn-off.

  11. Synthesis, characterization and catalytic activity of acid-base bifunctional materials through protection of amino groups

    SciTech Connect

    Shao, Yanqiu; Liu, Heng; Yu, Xiaofang; Guan, Jingqi; Kan, Qiubin

    2012-03-15

    Graphical abstract: Acid-base bifunctional mesoporous material SO{sub 3}H-SBA-15-NH{sub 2} was successfully synthesized under low acidic medium through protection of amino groups. Highlights: Black-Right-Pointing-Pointer The acid-base bifunctional material SO{sub 3}H-SBA-15-NH{sub 2} was successfully synthesized through protection of amino groups. Black-Right-Pointing-Pointer The obtained bifunctional material was tested for aldol condensation. Black-Right-Pointing-Pointer The SO{sub 3}H-SBA-15-NH{sub 2} catalyst containing amine and sulfonic acid groups exhibited excellent acid-basic properties. -- Abstract: Acid-base bifunctional mesoporous material SO{sub 3}H-SBA-15-NH{sub 2} was successfully synthesized under low acidic medium through protection of amino groups. X-ray diffraction (XRD), N{sub 2} adsorption-desorption, transmission electron micrographs (TEM), back titration, {sup 13}C magic-angle spinning (MAS) NMR and {sup 29}Si magic-angle spinning (MAS) NMR were employed to characterize the synthesized materials. The obtained bifunctional material was tested for aldol condensation reaction between acetone and 4-nitrobenzaldehyde. Compared with monofunctional catalysts of SO{sub 3}H-SBA-15 and SBA-15-NH{sub 2}, the bifunctional sample of SO{sub 3}H-SBA-15-NH{sub 2} containing amine and sulfonic acid groups exhibited excellent acid-basic properties, which make it possess high activity for the aldol condensation.

  12. Kraft lignin/silica-AgNPs as a functional material with antibacterial activity.

    PubMed

    Klapiszewski, Łukasz; Rzemieniecki, Tomasz; Krawczyk, Magdalena; Malina, Dagmara; Norman, Małgorzata; Zdarta, Jakub; Majchrzak, Izabela; Dobrowolska, Anna; Czaczyk, Katarzyna; Jesionowski, Teofil

    2015-10-01

    Advanced functional silica/lignin hybrid materials, modified with nanosilver, were obtained. The commercial silica Syloid 244 was used, modified with N-(2-aminoethyl)-3-aminopropyltrimethoxysilane to increase its chemical affinity to lignin. Similarly, kraft lignin was oxidized using a solution of sodium periodate to activate appropriate functional groups on its surface. Silver nanoparticles were grafted onto the resulting silica/lignin hybrids. The systems obtained were comprehensively tested using available techniques and methods, including transmission electron microscopy, Fourier transform infrared spectroscopy, energy-dispersive X-ray spectroscopy, elemental analysis and atomic absorption spectroscopy. An evaluation was also made of the electrokinetic stability of the systems with and without silver nanoparticles. Conclusions were drawn concerning the chemical nature of the bonds between the precursors and the effectiveness of the method of binding nanosilver to the hybrid materials. The antimicrobial activity of the studied materials was tested against five species of Gram-positive and Gram-negative bacteria. The addition of silver nanoparticles to the silica/lignin hybrids led to inhibition of the growth of the analyzed bacteria. The best results were obtained against Pseudomonas aeruginosa, a dangerous human pathogen.

  13. Towards multifunctional materials incorporating elastomers and reversible redox-active fragments.

    PubMed

    Tarrés, Màrius; Viñas, Clara; Cioran, Ana M; Hänninen, Mikko M; Sillanpää, Reijo; Teixidor, Francesc

    2014-11-24

    This paper presents a novel and unique feature of metallacarboranes, consisting of the linkage of this redox electro-active site to a stretchable polymer. This is based on polyTHF, a known and applied material. This hybrid material has the two ends functionalized: one with the aforementioned redox molecule and the other with a terminal OH group, both linked by a molecular spring. Moreover, the redox electro-active molecules can be synthesized with either cobalt (cobaltabisdicarbollide) or with iron (ferrabisdicarbollide), species whose respective E(1/2) value differs by almost 1 V. The polymerization mechanism, based on an intermediate molecular crystal structure, is explained through an unexpected cyclization process of the dioxanate derivative of the metallacarboranes with an additional THF molecule. This is achieved in the absence of any metal or external electrophile. Surface functionalization of a Pt electrode by the electropolymerization of pyrrole doped with the pristine metallacarboranes and with the polyTHF hybrid materials is reported in this paper.

  14. Microscopic theory of the glassy dynamics of passive and active network materials.

    PubMed

    Wang, Shenshen; Wolynes, Peter G

    2013-03-28

    Signatures of glassy dynamics have been identified experimentally for a rich variety of materials in which molecular networks provide rigidity. Here we present a theoretical framework to study the glassy behavior of both passive and active network materials. We construct a general microscopic network model that incorporates nonlinear elasticity of individual filaments and steric constraints due to crowding. Based on constructive analogies between structural glass forming liquids and random field Ising magnets implemented using a heterogeneous self-consistent phonon method, our scheme provides a microscopic approach to determine the mismatch surface tension and the configurational entropy, which compete in determining the barrier for structural rearrangements within the random first order transition theory of escape from a local energy minimum. The influence of crosslinking on the fragility of inorganic network glass formers is recapitulated by the model. For active network materials, the mapping, which correlates the glassy characteristics to the network architecture and properties of nonequilibrium motor processes, is shown to capture several key experimental observations on the cytoskeleton of living cells: Highly connected tense networks behave as strong glass formers; intense motor action promotes reconfiguration. The fact that our model assuming a negative motor susceptibility predicts the latter suggests that on average the motorized processes in living cells do resist the imposed mechanical load. Our calculations also identify a spinodal point where simultaneously the mismatch penalty vanishes and the mechanical stability of amorphous packing disappears.

  15. Synthesis of Iminodiacetate Functionalized Polypropylene Films and Their Efficacy as Antioxidant Active-Packaging Materials.

    PubMed

    Lin, Zhuangsheng; Roman, Maxine J; Decker, Eric A; Goddard, Julie M

    2016-06-01

    The introduction of metal-chelating ligands to the food-contact surface of packaging materials may enable the removal of synthetic chelators (e.g., ethylenediamine tetra-acetic acid (EDTA)) from food products. In this study, the metal-chelating ligand iminodiacetate (IDA) was covalently grafted onto polypropylene surfaces to produce metal-chelating active-packaging films. The resulting films were able to chelate 138.1 ± 26 and 210.0 ± 28 nmol/cm(2) Fe(3+) and Cu(2+) ions, respectively, under acidic conditions (pH 3.0). The films demonstrated potent antioxidant efficacy in two model food systems. In an emulsified-oil system, the chelating materials extended the lag phase of both lipid hydroperoxide and hexanal formation from 5 to 25 days and were as effective as EDTA. The degradation half-life of ascorbic acid in an aqueous solution was extended from 5 to 14 days. This work demonstrates the potential application of surface-grafted chelating IDA ligands as effective antioxidant active food-packaging materials. PMID:27243793

  16. Studies on supercapacitor electrode material from activated lignin-derived mesoporous carbon.

    PubMed

    Saha, Dipendu; Li, Yunchao; Bi, Zhonghe; Chen, Jihua; Keum, Jong K; Hensley, Dale K; Grappe, Hippolyte A; Meyer, Harry M; Dai, Sheng; Paranthaman, M Parans; Naskar, A K

    2014-01-28

    We synthesized mesoporous carbon from pre-cross-linked lignin gel impregnated with a surfactant as the pore-forming agent and then activated the carbon through physical and chemical methods to obtain activated mesoporous carbon. The activated mesoporous carbons exhibited 1.5- to 6-fold increases in porosity with a maximum Brunauer-Emmett-Teller (BET) specific surface area of 1148 m(2)/g and a pore volume of 1.0 cm(3)/g. Both physical and chemical activation enhanced the mesoporosity along with significant microporosity. Plots of cyclic voltammetric data with the capacitor electrode made from these carbons showed an almost rectangular curve depicting the behavior of ideal double-layer capacitance. Although the pristine mesoporous carbon exhibited a range of surface-area-based capacitance similar to that of other known carbon-based supercapacitors, activation decreased the surface-area-based specific capacitance and enhanced the gravimetric specific capacitance of the mesoporous carbons. A vertical tail in the lower-frequency domain of the Nyquist plot provided additional evidence of good supercapacitor behavior for the activated mesoporous carbons. We have modeled the equivalent circuit of the Nyquist plot with the help of two constant phase elements (CPE). Our work demonstrated that biomass-derived mesoporous carbon materials continue to show potential for use in specific electrochemical applications.

  17. Evaluation of precision and accuracy of selenium measurements in biological materials using neutron activation analysis

    SciTech Connect

    Greenberg, R.R.

    1988-01-01

    In recent years, the accurate determination of selenium in biological materials has become increasingly important in view of the essential nature of this element for human nutrition and its possible role as a protective agent against cancer. Unfortunately, the accurate determination of selenium in biological materials is often difficult for most analytical techniques for a variety of reasons, including interferences, complicated selenium chemistry due to the presence of this element in multiple oxidation states and in a variety of different organic species, stability and resistance to destruction of some of these organo-selenium species during acid dissolution, volatility of some selenium compounds, and potential for contamination. Neutron activation analysis (NAA) can be one of the best analytical techniques for selenium determinations in biological materials for a number of reasons. Currently, precision at the 1% level (1s) and overall accuracy at the 1 to 2% level (95% confidence interval) can be attained at the U.S. National Bureau of Standards (NBS) for selenium determinations in biological materials when counting statistics are not limiting (using the {sup 75}Se isotope). An example of this level of precision and accuracy is summarized. Achieving this level of accuracy, however, requires strict attention to all sources of systematic error. Precise and accurate results can also be obtained after radiochemical separations.

  18. Multifunctional radical-doped polyoxometalate-based host-guest material: photochromism and photocatalytic activity.

    PubMed

    Liao, Jian-Zhen; Zhang, Hai-Long; Wang, Sa-Sa; Yong, Jian-Ping; Wu, Xiao-Yuan; Yu, Rongmin; Lu, Can-Zhong

    2015-05-01

    An effective strategy to synthesize multifunctional materials is the incorporation of functional organic moieties and metal oxide clusters via self-assembly. A rare multifunctional radical-doped zinc-based host-guest crystalline material was synthesized with a fast-responsive reversible ultraviolet visible light photochromism, photocontrolled tunable luminescence, and highly selective photocatalytic oxidation of benzylic alcohols as a result of blending of distinctively different functional components, naphthalenediimide tectons, and polyoxometalates (POMs). It is highly unique to link π-electron-deficient organic tectons and POMs by unusual POMs anion-π interactions, which are not only conducive to keeping the independence of each component but also effectively promoting the charge transfer or exchange among the components to realize the fast-responsive photochromism, photocontrolled tunable luminescence, and photocatalytic activity.

  19. Analysis of marine sediment and lobster hepatopancreas reference materials by instrumental photon activation

    SciTech Connect

    Landsberger, S.; Davidson, W.F.

    1985-01-01

    By use of instrumental photon activation analysis, twelve trace (As, Ba, Cr, Co, Mn, Ni, Pb, Sb, Sr, U, Zn, and Zr) and eight minor (C, Na, Mg, Co, K, Ca, Tl, and Fe) elements were determined in a certified marine sediment standard reference material as well as eight trace (Mn, Ni, Cu, Zn, As, Sr, Cd, and Pb) and four minor (Na, Mg, Cl, and Ca) elements in a certified marine tissue (lobster hepatopancreas) standard reference material. The precision and accuracy of the present results when compared to the accepted values clearly demonstrate the reliability of this nondestructive technique and its applicability to marine environmental or marine geochemical studies. 24 references, 4 figures, 3 tables.

  20. Removal of Basic Violet 14 from aqueous solution using sulphuric acid activated materials.

    PubMed

    Suresh, S

    2016-01-01

    In this study the adsorption of Basic Violet, 14 from aqueous solution onto sulphuric acid activated materials prepared from Calophyllum inophyllum (CS) and Theobroma cacao (TS) shells were investigated. The experimental data were analysed by Langmuir, Freundlich and Temkin isotherm models. The results showed that CS has a superior adsorption capacity compared to the TS. The adsorption capacity was found to be 1416.43 mg/g for CS and 980.39 mg/g for TS. The kinetic data results at different concentrations were analysed using pseudo first-order and pseudo-second order model. Boyd plot indicates that the dye adsorption onto CS and TS is controlled by film diffusion. The adsorbents were characterised by scanning electron microscopy. The materials used in this study were economical waste products and hence can be an attractive alternative to costlier adsorbents for dye removal in industrial wastewater treatment processes. PMID:27330899

  1. Multifunctional radical-doped polyoxometalate-based host-guest material: photochromism and photocatalytic activity.

    PubMed

    Liao, Jian-Zhen; Zhang, Hai-Long; Wang, Sa-Sa; Yong, Jian-Ping; Wu, Xiao-Yuan; Yu, Rongmin; Lu, Can-Zhong

    2015-05-01

    An effective strategy to synthesize multifunctional materials is the incorporation of functional organic moieties and metal oxide clusters via self-assembly. A rare multifunctional radical-doped zinc-based host-guest crystalline material was synthesized with a fast-responsive reversible ultraviolet visible light photochromism, photocontrolled tunable luminescence, and highly selective photocatalytic oxidation of benzylic alcohols as a result of blending of distinctively different functional components, naphthalenediimide tectons, and polyoxometalates (POMs). It is highly unique to link π-electron-deficient organic tectons and POMs by unusual POMs anion-π interactions, which are not only conducive to keeping the independence of each component but also effectively promoting the charge transfer or exchange among the components to realize the fast-responsive photochromism, photocontrolled tunable luminescence, and photocatalytic activity. PMID:25859742

  2. Prompt gamma activation analysis of boron in reference materials using diffracted polychromatic neutron beam

    NASA Astrophysics Data System (ADS)

    Byun, S. H.; Sun, G. M.; Choi, H. D.

    2004-01-01

    Boron concentrations were analyzed for standard reference materials by prompt gamma activation analysis (PGAA). The measurements were performed at the SNU-KAERI PGAA facility installed at Hanaro, the research reactor of Korea Atomic Energy Research Institute (KAERI). The facility uses a diffracted polychromatic beam with a neutron flux of 7.9 × 10 7 n/cm 2 s. Elemental sensitivity for boron was calibrated from the prompt gamma-ray spectra of boric acid samples containing 2-45 μg boron. The sensitivity of 2131 cps/mg-B was obtained from the linearity of the boron peak count rate versus the boron mass. The detection limit for boron was estimated to be 67 ng from an empty sample bag spectrum for a counting time of 10,000 s. The measured boron concentrations for standard reference materials showed good consistency with the certified or information values.

  3. Use of electrochemically activated aqueous solutions in the manufacture of fur materials.

    PubMed

    Danylkovych, Anatoliy G; Lishchuk, Viktor I; Romaniuk, Oksana O

    2016-01-01

    The influence of characteristics of electrochemically activated aqueous processing mediums in the treatment of fur skins with different contents of fatty substances was investigated. The use of electroactive water, namely anolytes and catholytes, forgoing antiseptics or surface-active materials, helped to restore the hydration of fur skins and to remove from them soluble proteins, carbohydrates and fatty substances. The activating effect of anolyte and catholyte in solutions of water on the processes of treating raw furs is explained by their special physical and chemical properties, namely the presence of free radicals, ions and molecules of water which easily penetrate cells' membranes and into the structure of non-collagen components and microfiber structure of dermic collagen. The stage of lengthy acid and salt treatment is excluded from the technical treatment as a result of using electroactivated water with high oxidizing power. A low-cost technology of processing different kinds of fur with the use of electroactivated water provides for substantial economy of water and chemical reagents, a two to threefold acceleration of the soaking and tanning processes and creation of highly elastic fur materials with a specified set of physical and chemical properties. At the same time the technology of preparatory processes of fur treatment excludes the use of such toxic antiseptics as formalin and sodium silicofluoride, which gives grounds to regard it as ecologically safe.

  4. Anthropogenic activities have contributed moderately to increased inputs of organic materials in marginal seas off China.

    PubMed

    Liu, Liang-Ying; Wei, Gao-Ling; Wang, Ji-Zhong; Guan, Yu-Feng; Wong, Charles S; Wu, Feng-Chang; Zeng, Eddy Y

    2013-10-15

    Sediment has been recognized as a gigantic sink of organic materials and therefore can record temporal input trends. To examine the impact of anthropogenic activities on the marginal seas off China, sediment cores were collected from the Yellow Sea, the inner shelf of the East China Sea (ECS), and the South China Sea (SCS) to investigate the sources and spatial and temporal variations of organic materials, i.e., total organic carbon (TOC) and aliphatic hydrocarbons. The concentration ranges of TOC were 0.5-1.29, 0.63-0.83, and 0.33-0.85%, while those of Σn-C14-35 (sum of n-alkanes with carbon numbers of 14-35) were 0.08-1.5, 0.13-1.97, and 0.35-0.96 μg/g dry weight in sediment cores from the Yellow Sea, ECS inner shelf, and the SCS, respectively. Terrestrial higher plants were an important source of aliphatic hydrocarbons in marine sediments off China. The spatial distribution of Σn-C14-35 concentrations and source diagnostic ratios suggested a greater load of terrestrial organic materials in the Yellow Sea than in the ECS and SCS. Temporally, TOC and Σn-C14-35 concentrations increased with time and peaked at either the surface or immediate subsurface layers. This increase was probably reflective of elevated inputs of organic materials to marginal seas off China in recent years, and attributed partly to the impacts of intensified anthropogenic activities in mainland China. Source diagnostics also suggested that aliphatic hydrocarbons were mainly derived from biogenic sources, with a minority in surface sediment layers from petroleum sources, consistent with the above-mentioned postulation.

  5. An active thermography approach for thermal and electrical characterization of thermoelectric materials

    NASA Astrophysics Data System (ADS)

    Streza, M.; Longuemart, S.; Guilmeau, E.; Strzalkowski, K.; Touati, K.; Depriester, M.; Maignan, A.; Sahraoui, A. Hadj

    2016-07-01

    The enhancement of figure of merit (ZT) of thermoelectrics is becoming extremely important for an efficient conversion of thermal energy into electrical energy. In this respect, reliable measurements of thermal and electrical parameters are of paramount importance in order to characterize thermoelectric materials in terms of their efficiency. In this work, a combined theoretical-experimental active thermography approach is presented. The method consists of selecting the right sequential interdependence between the excitation frequency and the sampling rate of the infrared camera, by computing a temporal Fourier analysis of each pixel of the recorded IR image. The method is validated by using a reference sample which is then applied to a recent synthesized titanium trisulphide thermoelectric material (TiS3). By combining AC and steady-state experiments, one can obtain information on both thermal and electrical parameters of TE materials (namely thermal diffusivity, Seebeck coefficient). The thermal diffusivity and thermal conductivity of TiS3 are also measured using photothermal radiometry technique (PTR) and the resulting values of these parameters are α  =  9.7*10-7 m2 s-1 and k  =  2.2 W m-1 K, respectively. The results obtained with the two techniques are in good agreement. In the case of TE materials, the main benefit of the proposed method is related to its non-contact nature and the possibility of obtaining the electric potential and temperature at the same probes. The Seebeck coefficient obtained by active IR thermography (S  =  -554 μV K-1) is consistent with the one obtained using an ULVAC-ZEM3 system (S  =  -570 μV K-1). For a large number of users of thermographic cameras, which are not equipped with a lock-in thermography module, the present approach provides an affordable and cheaper solution.

  6. An active thermography approach for thermal and electrical characterization of thermoelectric materials

    NASA Astrophysics Data System (ADS)

    Streza, M.; Longuemart, S.; Guilmeau, E.; Strzalkowski, K.; Touati, K.; Depriester, M.; Maignan, A.; Sahraoui, A. Hadj

    2016-07-01

    The enhancement of figure of merit (ZT) of thermoelectrics is becoming extremely important for an efficient conversion of thermal energy into electrical energy. In this respect, reliable measurements of thermal and electrical parameters are of paramount importance in order to characterize thermoelectric materials in terms of their efficiency. In this work, a combined theoretical-experimental active thermography approach is presented. The method consists of selecting the right sequential interdependence between the excitation frequency and the sampling rate of the infrared camera, by computing a temporal Fourier analysis of each pixel of the recorded IR image. The method is validated by using a reference sample which is then applied to a recent synthesized titanium trisulphide thermoelectric material (TiS3). By combining AC and steady-state experiments, one can obtain information on both thermal and electrical parameters of TE materials (namely thermal diffusivity, Seebeck coefficient). The thermal diffusivity and thermal conductivity of TiS3 are also measured using photothermal radiometry technique (PTR) and the resulting values of these parameters are α  =  9.7*10‑7 m2 s‑1 and k  =  2.2 W m‑1 K, respectively. The results obtained with the two techniques are in good agreement. In the case of TE materials, the main benefit of the proposed method is related to its non-contact nature and the possibility of obtaining the electric potential and temperature at the same probes. The Seebeck coefficient obtained by active IR thermography (S  =  ‑554 μV K‑1) is consistent with the one obtained using an ULVAC-ZEM3 system (S  =  ‑570 μV K‑1). For a large number of users of thermographic cameras, which are not equipped with a lock-in thermography module, the present approach provides an affordable and cheaper solution.

  7. The Astronomy Workshop: Computer Assisted Learning Tools with Instructor Support Materials and Student Activities

    NASA Astrophysics Data System (ADS)

    Deming, Grace; Hamilton, D.; Hayes-Gehrke, M.

    2006-12-01

    The Astronomy Workshop (http://janus.astro.umd.edu) is a collection of interactive World Wide Web tools that were developed under the direction of Doug Hamilton for use in undergraduate classes, as supplementary materials appropriate for grades 9-12, and by the general public. The philosophy of the website is to foster student and public interest in astronomy by capitalizing on their fascination with computers and the internet. Many of the tools were developed by graduate and undergraduate students at UMD. This website contains over 20 tools on topics including scientific notation, giant impacts, extrasolar planets, astronomical distances, planets, moons, comets, and asteroids. Educators around the country at universities, colleges, and secondary schools have used the Astronomy Workshop’s tools and activities as homework assignments, in-class demos, or extra credit. Since 2005, Grace Deming has assessed several of the Astronomy Workshop’s tools for clarity and effectiveness by interviewing students as they used tools on the website. Based on these interviews, Deming wrote student activities and instructor support materials and posted them to the website. Over the next three years, we will continue to interview students, develop web materials, and field-test activities. We are targeting classes in introductory undergraduate astronomy courses and grades 11-12 for our Spring 2007 field tests. We are interested in hearing your ideas on how we can make the Astronomy Workshop more appealing to educators, museum directors, specialty programs, and professors. This research is funded by NASA EPO grants NNG04GM18G and NNG06GGF99G.

  8. Optimizing vermistabilization of waste activated sludge using vermicompost as bulking material.

    PubMed

    Hait, Subrata; Tare, Vinod

    2011-03-01

    An integrated composting-vermicomposting system has been developed for stabilization of waste activated sludge (WAS) using matured vermicompost as bulking material and Eisenia fetida as earthworm species. Composting was considered as the main processing unit and vermicomposting as polishing unit. The integrated system was optimized by successive recycling and mixing of bulking material with WAS during composting and examining the effects of environmental condition (i.e. temperature: 10-30°C and relative humidity: 50 and 90%) and stocking density (0-5 kg/m(2)) on vermicomposting. The composting stage resulted in sufficient enrichment of bulking material with organic matter after 20 cycles of recycling and mixing with WAS and produced materials acceptable for vermicomposting. Vermicomposting of composted material caused significant reduction in pH, volatile solids (VS), specific oxygen uptake rate (SOUR), total carbon (TC), total organic carbon (TOC), C/N ratio and pathogens and a substantial increase in electrical conductivity (EC), total nitrogen (TN) and total phosphorous (TP). The environmental conditions (i.e. temperature: 10-30°C and relative humidity: 50 and 90%) and stocking density (0-5 kg/m(2)) have profound effects on vermicomposting. Temperature of 20°C with high humidity is the best suited environmental condition for vermicomposting employing E. fetida. The favorable stocking density range for vermiculture is 0.5-2.0 kg/m(2) (optimum: 0.5 kg/m(2)) and for vermicomposting is 2.0-4.0 kg/m(2) (optimum: 3.0 kg/m(2)), respectively. The integrated composting-vermicomposting system potentially stabilizes and converts the hazardous WAS into quality organic manure for agronomic applications without any adverse effects.

  9. Activated carbon made from cow dung as electrode material for electrochemical double layer capacitor

    NASA Astrophysics Data System (ADS)

    Bhattacharjya, Dhrubajyoti; Yu, Jong-Sung

    2014-09-01

    Cow dung is one of the most abundant wastes generated on earth and has been traditionally used as fertilizer and fuel in most of the developing countries. In this study activated carbon is synthesized from cow dung by a modified chemical activation method, where partially carbonized cow dung is treated with KOH in different ratio. The synthesized activated carbon possesses irregular surface morphology with high surface area in the range of 1500-2000 m2 g-1 with proper amount of micropore and mesopore volume. In particular, we demonstrate that the surface morphology and porosity parameters change with increase in KOH ratio. These activated carbons are tested as electrode material in two-electrode symmetric supercapacitor system in non-aqueous electrolyte and found to exhibit high specific capacitance with excellent retention of it at high current density and for long term operation. In particular, the activated carbon synthesized at 2:1 ratio of KOH and the pre-carbonized char shows the best performance with specific capacitance of 124 F g-1 at 0.1 A g-1 and retains up to 117 F g-1 at 1.0 A g-1 current density. The performance is attributed to high surface area along with optimum amount of micropore and mesopore volume.

  10. Writing job descriptions.

    PubMed

    Schaffner, M

    1990-01-01

    The skill of writing job descriptions begins with an understanding of the advantages, as well as the basic elements, of a well written description. The end result should be approved and updated as needed. Having a better understanding of this process makes writing the job description a challenge rather than a chore.

  11. A history of semi-active laser dome and window materials

    NASA Astrophysics Data System (ADS)

    Sullivan, Roger M.

    2014-05-01

    Semi-Active Laser (SAL) guidance systems were developed starting in the mid-1960's and today form an important class of precision guided weapons. The laser wavelengths generally fall in the short wave infrared region of the spectrum. Relative to passive, image based, infrared seekers the optical demands placed on the domes or windows of SAL seekers is very modest, allowing the use of low cost, easily manufactured materials, such as polycarbonate. This paper will examine the transition of SAL window and dome science and technology from the laboratory to battlefield, with special emphasis on the story of polycarbonate domes.

  12. Magnesium as Novel Material for Active Plasmonics in the Visible Wavelength Range.

    PubMed

    Sterl, Florian; Strohfeldt, Nikolai; Walter, Ramon; Griessen, Ronald; Tittl, Andreas; Giessen, Harald

    2015-12-01

    Investigating new materials plays an important role for advancing the field of nanoplasmonics. In this work, we fabricate nanodisks from magnesium and demonstrate tuning of their plasmon resonance throughout the whole visible wavelength range by changing the disk diameter. Furthermore, we employ a catalytic palladium cap layer to transform the metallic Mg particles into dielectric MgH2 particles when exposed to hydrogen gas. We prove that this transition can be reversed in the presence of oxygen. This yields plasmonic nanostructures with an extinction spectrum that can be repeatedly switched on or off or kept at any intermediate state, offering new perspectives for active plasmonic metamaterials.

  13. Impact of the excitation source and plasmonic material on cylindrical active coated nano-particles.

    PubMed

    Arslanagic, Samel; Liu, Yan; Malureanu, Radu; Ziolkowski, Richard W

    2011-01-01

    Electromagnetic properties of cylindrical active coated nano-particles comprised of a silica nano-cylinder core layered with a plasmonic concentric nano-shell are investigated for potential nano-sensor applications. Particular attention is devoted to the near-field properties of these particles, as well as to their far-field radiation characteristics, in the presence of an electric or a magnetic line source. A constant frequency canonical gain model is used to account for the gain introduced in the dielectric part of the nano-particle, whereas three different plasmonic materials (silver, gold, and copper) are employed and compared for the nano-shell layers.

  14. Quantitative structure-activity relationship modelling of oral acute toxicity and cytotoxic activity of fragrance materials in rodents.

    PubMed

    Papa, E; Luini, M; Gramatica, P

    2009-10-01

    Fragrance materials are used as ingredients in many consumer and personal care products. The wide and daily use of these substances, as well as their mainly uncontrolled discharge through domestic sewage, make fragrance materials both potential indoor and outdoor air pollutants which are also connected to possible toxic effects on humans (asthma, allergies, headaches). Unfortunately, little is known about the environmental fate and toxicity of these substances. However, the use of alternative, predictive approaches, such as quantitative structure-activity relationships (QSARs), can help in filling the data gap and in the characterization of the environmental and toxicological profile of these substances. In the proposed study, ordinary least squares regression-based QSAR models were developed for three toxicological endpoints: mouse oral LD(50), inhibition of NADH-oxidase (EC(50) NADH-Ox) and the effect on mitochondrial membrane potential (EC(50) DeltaPsim). Theoretical molecular descriptors were calculated by using DRAGON software, and the best QSAR models were developed according to the principles defined by the Organization for Economic Co-operation and Development.

  15. Low-background instrumental neutron activation analysis of silicon semiconductor materials

    SciTech Connect

    Smith, A.R.; McDonald, R.J.; Manini, H.; Hurley, D.L.; Norman, E.B.; Vella, M.C.; Odom, R.W.

    1996-01-01

    Samples of silicon wafers, some implanted with zinc, some with memory circuits fabricated on them, and some with oxide coatings were activated with neutrons and analyzed for trace element impurities with low-background germanium gamma-ray spectrometers. Results are presented for these samples as well as for a reference material. Because the silicon matrix activation is so small, reduced spectrometer system background permits the detection of significantly lower impurity concentrations than would otherwise be possible. For the highest efficiency and lowest background system, limits on the lowest levels of trace element concentrations have been measured for wafer sized (1 to 10 g) samples and inferred for bulk sized (365 g) samples. For wafer-sized samples, part-per-trillion detection capabilities are demonstrated for a variety of elemental contaminants important in semiconductor fabrication.

  16. Spacelab Mission 3 experiment descriptions

    NASA Technical Reports Server (NTRS)

    Hill, C. K. (Editor)

    1982-01-01

    The Spacelab 3 mission is the first operational flight of Spacelab aboard the shuttle transportation system. The primary objectives of this mission are to conduct application, science, and technology experimentation that requires the low gravity environment of Earth orbit and an extended duration, stable vehicle attitude with emphasis on materials processing. This document provides descriptions of the experiments to be performed during the Spacelab 3 mission.

  17. Domibacillus tundrae sp. nov., isolated from active layer soil of tussock tundra in Alaska, and emended description of the genus Domibacillus.

    PubMed

    Gyeong, Hye Ryeon; Baek, Kiwoon; Hwang, Chung Yeon; Park, Key Hun; Kim, Hye Min; Lee, Hong Kum; Lee, Yoo Kyung

    2015-10-01

    A novel Gram-stain-positive, spore-forming, aerobic, motile and rod-shaped bacterium designated strain PAMC 80007T was isolated from an active layer soil sample of Council, Alaska. Optimal growth of strain PAMC 80007T was observed at 30 °C, pH 7.0 and in the presence of 2 % (w/v) NaCl. Phylogenetic analysis based on 16S rRNA gene sequence indicated that strain PAMC 80007T belonged to the genus Domibacillus. This strain was closely related to Domibacillus enclensis (98.3 %), Domibacillus robiginosus (98.3 %) and Domibacillus indicus (97.2 %). Genomic DNA G+C content was 43.5 mol% and genomic relatedness analyses based on the average nucleotide identity and the genome-to-genome distance showed that strain PAMC 80007T is clearly distinguished from the closely related species of the genus Domibacillus. The major fatty acids (>5 %) were iso-C15 : 0 (24.7 %), C16 : 1ω11c (16.8 %), anteiso-C15 : 0 (16.5 %), C16 : 0 (15.6 %) and anteiso-C17 : 0 (8.7 %). The major respiratory isoprenoid quinones were menaquinone-6 (MK-6) and menaquinone-7 (MK-7), and the polar lipid profile contained diphosphatidylglycerol, phosphatidylglycerol, phosphoglycolipid, phospholipid and two unidentified lipids. meso-Diaminopimelic acid (type A1γ) was present in the cell-wall peptidoglycan, and the major whole-cell sugar was ribose with a minor quantity of glucose. Results from a polyphasic study suggested that strain PAMC 80007T represents a novel species of the genus Domibacillus for which the name Domibacillus tundrae sp. nov. is proposed. The type strain is PAMC 80007T ( = JCM 30371T = KCTC 33549T = DSM 29572T). An emended description of the genus Domibacillus is also provided.

  18. Characterizing proton-activated materials to develop PET-mediated proton range verification markers

    NASA Astrophysics Data System (ADS)

    Cho, Jongmin; Ibbott, Geoffrey S.; Kerr, Matthew D.; Amos, Richard A.; Stingo, Francesco C.; Marom, Edith M.; Truong, Mylene T.; Palacio, Diana M.; Betancourt, Sonia L.; Erasmus, Jeremy J.; DeGroot, Patricia M.; Carter, Brett W.; Gladish, Gregory W.; Sabloff, Bradley S.; Benveniste, Marcelo F.; Godoy, Myrna C.; Patil, Shekhar; Sorensen, James; Mawlawi, Osama R.

    2016-06-01

    Conventional proton beam range verification using positron emission tomography (PET) relies on tissue activation alone and therefore requires particle therapy PET whose installation can represent a large financial burden for many centers. Previously, we showed the feasibility of developing patient implantable markers using high proton cross-section materials (18O, Cu, and 68Zn) for in vivo proton range verification using conventional PET scanners. In this technical note, we characterize those materials to test their usability in more clinically relevant conditions. Two phantoms made of low-density balsa wood (~0.1 g cm‑3) and beef (~1.0 g cm‑3) were embedded with Cu or 68Zn foils of several volumes (10–50 mm3). The metal foils were positioned at several depths in the dose fall-off region, which had been determined from our previous study. The phantoms were then irradiated with different proton doses (1–5 Gy). After irradiation, the phantoms with the embedded foils were moved to a diagnostic PET scanner and imaged. The acquired data were reconstructed with 20–40 min of scan time using various delay times (30–150 min) to determine the maximum contrast-to-noise ratio. The resultant PET/computed tomography (CT) fusion images of the activated foils were then examined and the foils’ PET signal strength/visibility was scored on a 5 point scale by 13 radiologists experienced in nuclear medicine. For both phantoms, the visibility of activated foils increased in proportion to the foil volume, dose, and PET scan time. A linear model was constructed with visibility scores as the response variable and all other factors (marker material, phantom material, dose, and PET scan time) as covariates. Using the linear model, volumes of foils that provided adequate visibility (score 3) were determined for each dose and PET scan time. The foil volumes that were determined will be used as a guideline in developing practical implantable markers.

  19. Characterizing proton-activated materials to develop PET-mediated proton range verification markers.

    PubMed

    Cho, Jongmin; Ibbott, Geoffrey S; Kerr, Matthew D; Amos, Richard A; Stingo, Francesco C; Marom, Edith M; Truong, Mylene T; Palacio, Diana M; Betancourt, Sonia L; Erasmus, Jeremy J; DeGroot, Patricia M; Carter, Brett W; Gladish, Gregory W; Sabloff, Bradley S; Benveniste, Marcelo F; Godoy, Myrna C; Patil, Shekhar; Sorensen, James; Mawlawi, Osama R

    2016-06-01

    Conventional proton beam range verification using positron emission tomography (PET) relies on tissue activation alone and therefore requires particle therapy PET whose installation can represent a large financial burden for many centers. Previously, we showed the feasibility of developing patient implantable markers using high proton cross-section materials ((18)O, Cu, and (68)Zn) for in vivo proton range verification using conventional PET scanners. In this technical note, we characterize those materials to test their usability in more clinically relevant conditions. Two phantoms made of low-density balsa wood (~0.1 g cm(-3)) and beef (~1.0 g cm(-3)) were embedded with Cu or (68)Zn foils of several volumes (10-50 mm(3)). The metal foils were positioned at several depths in the dose fall-off region, which had been determined from our previous study. The phantoms were then irradiated with different proton doses (1-5 Gy). After irradiation, the phantoms with the embedded foils were moved to a diagnostic PET scanner and imaged. The acquired data were reconstructed with 20-40 min of scan time using various delay times (30-150 min) to determine the maximum contrast-to-noise ratio. The resultant PET/computed tomography (CT) fusion images of the activated foils were then examined and the foils' PET signal strength/visibility was scored on a 5 point scale by 13 radiologists experienced in nuclear medicine. For both phantoms, the visibility of activated foils increased in proportion to the foil volume, dose, and PET scan time. A linear model was constructed with visibility scores as the response variable and all other factors (marker material, phantom material, dose, and PET scan time) as covariates. Using the linear model, volumes of foils that provided adequate visibility (score 3) were determined for each dose and PET scan time. The foil volumes that were determined will be used as a guideline in developing practical implantable markers. PMID:27203621

  20. Characterizing proton-activated materials to develop PET-mediated proton range verification markers

    NASA Astrophysics Data System (ADS)

    Cho, Jongmin; Ibbott, Geoffrey S.; Kerr, Matthew D.; Amos, Richard A.; Stingo, Francesco C.; Marom, Edith M.; Truong, Mylene T.; Palacio, Diana M.; Betancourt, Sonia L.; Erasmus, Jeremy J.; DeGroot, Patricia M.; Carter, Brett W.; Gladish, Gregory W.; Sabloff, Bradley S.; Benveniste, Marcelo F.; Godoy, Myrna C.; Patil, Shekhar; Sorensen, James; Mawlawi, Osama R.

    2016-06-01

    Conventional proton beam range verification using positron emission tomography (PET) relies on tissue activation alone and therefore requires particle therapy PET whose installation can represent a large financial burden for many centers. Previously, we showed the feasibility of developing patient implantable markers using high proton cross-section materials (18O, Cu, and 68Zn) for in vivo proton range verification using conventional PET scanners. In this technical note, we characterize those materials to test their usability in more clinically relevant conditions. Two phantoms made of low-density balsa wood (~0.1 g cm-3) and beef (~1.0 g cm-3) were embedded with Cu or 68Zn foils of several volumes (10-50 mm3). The metal foils were positioned at several depths in the dose fall-off region, which had been determined from our previous study. The phantoms were then irradiated with different proton doses (1-5 Gy). After irradiation, the phantoms with the embedded foils were moved to a diagnostic PET scanner and imaged. The acquired data were reconstructed with 20-40 min of scan time using various delay times (30-150 min) to determine the maximum contrast-to-noise ratio. The resultant PET/computed tomography (CT) fusion images of the activated foils were then examined and the foils’ PET signal strength/visibility was scored on a 5 point scale by 13 radiologists experienced in nuclear medicine. For both phantoms, the visibility of activated foils increased in proportion to the foil volume, dose, and PET scan time. A linear model was constructed with visibility scores as the response variable and all other factors (marker material, phantom material, dose, and PET scan time) as covariates. Using the linear model, volumes of foils that provided adequate visibility (score 3) were determined for each dose and PET scan time. The foil volumes that were determined will be used as a guideline in developing practical implantable markers.

  1. Special Form Testing of Sealed Source Encapsulation for High-Alpha-Activity Actinide Materials

    SciTech Connect

    Martinez, Oscar A

    2016-01-01

    In the United States all transportation of radioactive material is regulated by the U.S. Department of Transportation (DOT). Beginning in 2008 a new type of sealed-source encapsulation package was developed and tested by Oak Ridge National Laboratory (ORNL). These packages contain high-alpha-activity actinides and are regulated and transported in accordance with the requirements for DOT Class 7 hazardous material. The DOT provides specific regulations pertaining to special form encapsulation designs. The special form designation indicates that the encapsulated radioactive contents have a very low probability of dispersion even when subjected to significant structural events. The special form designs have been shown to simplify the delivery, transport, acceptance, and receipt processes. It is intended for these sealed-source encapsulations to be shipped to various facilities making it very advantageous for them to be certified as special form. To this end, DOT Certificates of Competent Authority (CoCAs) have been sought for the design suitable for containing high-alpha-activity actinide materials. This design consists of the high-alpha-activity material encapsulated within a triangular zirconia canister, referred to as a ZipCan, tile that is then enclosed by a spherical shell. The spherical shell design, with ZipCan tile inside, was tested for compliance with the special form regulations found in 49 CFR 173.469. The spherical enclosure was subjected to 9-m impact, 1 m percussion, and 10-minute thermal tests at the Packaging Evaluation Facility located at the National Transportation Research Center in Knoxville, TN USA and operated by ORNL. Before and after each test, the test units were subjected to a helium leak check and a bubble test. The ZipCan tiles and core were also subjected to the tests required for ISO 2919:2012(E), including a Class IV impact test and heat test and subsequently subjected to helium leakage rate tests [49 CFR 173.469(a)(4)(i)]. The impact

  2. Biomimetic active emulsions capture cell dynamics and direct bio-inspired materials

    NASA Astrophysics Data System (ADS)

    Ehrlicher, Allen; Amstad, Esther; Segmehl, Jana; Nakamura, Fumihiko; Stossel, Thomas; Pollak, Martin; Weitz, David

    2013-03-01

    The main biopolymers which make up the cellular cytoskeleton and provide cells with their shape are well understood, yet, how they organize into structures and set given cellular behavior remains unclear. We have reconstituted minimal networks of actin, a ubiquitous biopolymer, along with an associated motor protein myosin II to create biomimetic networks which replicate cell structure and actively contract when selectively provided with ATP. We emulsify these networks in 10-100 micron drops, provide a system to investigate strain-mediated protein interactions and network behavior in confined cell-similar volumes. These networks allow us to study strain-mediated protein-specific interactions in an actin network at a precision impossible in vivo. Using this system, we have identified strain-dependent behavior in actin cross linking proteins; mechanotransduction of signaling proteins in Filamin A, and unique catch-bond behavior in Alpha-actinin. This understanding of biopolymer self-organization to set cell mechanics, will help clarify how biology both generates and reacts to force; moreover this system provides a highly controlled platform for studying non-equilibrium materials, and creating microscopic building block for a entirely new class of active materials.

  3. Non-destructive testing of composite materials by means of active thermography-based tools

    NASA Astrophysics Data System (ADS)

    Lizaranzu, Miguel; Lario, Alberto; Chiminelli, Agustín; Amenabar, Ibán

    2015-07-01

    Infrared analysis tools are nowadays widely used for the non-destructive testing of components made up in composite materials, belonging to many different industrial sectors. Being a non-contact method, its capability for the inspection of large areas in short periods of time justifies the great number of works and technical studies that can be found in this field. The growing interest in the technique is also supported by the development, during recent years, of increasingly powerful equipment and data analysis tools. In order to establish a base of knowledge to assist defect identification in real components inspections, the design and manufacturing of inspection samples including controlled defects, is a frequently used strategy. This paper deals with the analysis, by means of transient active thermography, of a set of inspection patterns made out of different composite materials and configurations that can be found in the wind turbine blade manufacturing industry. The design and manufacturing of these patterns are described, including different types of representative defects, stack configurations and composite manufacturing techniques. Reference samples are then inspected by means of active thermography analysis tools and the results obtained are discussed.

  4. Enhanced photosynthetic activity in Spinacia oleracea by spectral modification with a photoluminescent light converting material.

    PubMed

    Xia, Qi; Batentschuk, Miroslaw; Osvet, Andres; Richter, Peter; Häder, Donat P; Schneider, Juergen; Brabec, Christoph J; Wondraczek, Lothar; Winnacker, Albrecht

    2013-11-01

    The spectral conversion of incident sunlight by appropriate photoluminescent materials has been a widely studied issue for improving the efficiency of photovoltaic solar energy harvesting. By using phosphors with suitable excitation/emission properties, also the light conditions for plants can be adjusted to match the absorption spectra of chlorophyll dyes, in this way increasing the photosynthetic activity of the plant. Here, we report on the application of this principle to a high plant, Spinacia oleracea. We employ a calcium strontium sulfide phosphor doped with divalent europium (Ca0.4Sr0.6S:Eu(2+), CSSE) on a backlight conversion foil in photosynthesis experiments. We show that this phosphor can be used to effectively convert green to red light, centering at a wavelength of ~650 nm which overlaps the absorption peaks of chlorophyll a/b pigments. A measurement system was developed to monitor the photosynthetic activity, expressed as the CO2 assimilation rate of spinach leaves under various controlled light conditions. Results show that under identical external light supply which is rich in green photons, the CO2 assimilation rate can be enhanced by more than 25% when the actinic light is modified by the CSSE conversion foil as compared to a purely reflecting reference foil. These results show that the phosphor could be potentially applied to modify the solar spectrum by converting the green photons into photosynthetically active red photons for improved photosynthetic activity.

  5. SEQUESTRATION OF METALS IN ACTIVE CAP MATERIALS: A LABORATORY AND NUMERICAL EVALUATION

    SciTech Connect

    Dixon, K.; Knox, A.

    2012-02-13

    Active capping involves the use of capping materials that react with sediment contaminants to reduce their toxicity or bioavailability. Although several amendments have been proposed for use in active capping systems, little is known about their long-term ability to sequester metals. Recent research has shown that the active amendment apatite has potential application for metals contaminated sediments. The focus of this study was to evaluate the effectiveness of apatite in the sequestration of metal contaminants through the use of short-term laboratory column studies in conjunction with predictive, numerical modeling. A breakthrough column study was conducted using North Carolina apatite as the active amendment. Under saturated conditions, a spike solution containing elemental As, Cd, Co, Se, Pb, Zn, and a non-reactive tracer was injected into the column. A sand column was tested under similar conditions as a control. Effluent water samples were periodically collected from each column for chemical analysis. Relative to the non-reactive tracer, the breakthrough of each metal was substantially delayed by the apatite. Furthermore, breakthrough of each metal was substantially delayed by the apatite compared to the sand column. Finally, a simple 1-D, numerical model was created to qualitatively predict the long-term performance of apatite based on the findings from the column study. The results of the modeling showed that apatite could delay the breakthrough of some metals for hundreds of years under typical groundwater flow velocities.

  6. Using Plasma-Activated High Performance Fibers with Nanocrystalline Structure in Producing New Reinforced Composite Materials

    NASA Astrophysics Data System (ADS)

    Kudinov, V.; Korneeva, N.

    2008-08-01

    A wet-pull-out method for investigation of interaction between the high performance polyethylene (HPPE) fiber and polymer matrix is discussed. The paper concerns a cold plasma technique for improving the bond of the HPPE fibers to the matrices and the fibers impregnation with the matrix. Controlled parameters are pull-out force and the height of the matrix capillary lifting along the fiber both in air and in vacuum, in combination with plasma activation of the fibers. The method allows one to estimate the wetting and impregnation of multi-filament fiber with the matrix and simultaneously measure the joint strength. Coupled action of plasma treatment and vacuum impregnation of the fibers improves the joint strength by a factor of 3. Plasma activated HPPE fibers impregnated in air show the value of shear strength τ of 4 Kg/mm2. To understand the effect of treatment initial and plasma-activated fibers were used to fabricate composite materials (CM). The properties and failure modes were compared to those of CM reinforced with untreated fibers. The failure mode of CM reinforced with plasma-activated fibers points to a high strength of the bond between the fibers and the matrix.

  7. Occupational exposure to airborne asbestos from phenolic molding material (Bakelite) during sanding, drilling, and related activities.

    PubMed

    Mowat, Fionna; Bono, Michael; Lee, R J; Tamburello, Susan; Paustenbach, Dennis

    2005-10-01

    In this study, a historical phenolic (Bakelite) molding material, BMMA-5353, was tested to determine the airborne concentrations of asbestos fibers released during four different activities (sawing, sanding, drilling, and cleanup of dust generated from these activities). Each activity was performed for 30 min, often in triplicate. The primary objective for testing BMMA-5353 was to quantitatively determine the airborne concentration of asbestos fibers, if any, in the breathing zone of workers. Uses of this product typically did not include sawing or sanding, but it may have been drilled occasionally. For this reason, only small quantities were sawed, sanded, and drilled in this simulation study. Personal (n = 40), area (n = 80), and background/clearance (n = 88) air samples were collected during each activity and analyzed for total fiber concentrations using phase contrast microscopy (PCM) and, for asbestos fiber counts, transmission electron microscopy (TEM). The raw PCM-total fiber concentrations were adjusted based on TEM analyses that reported the fraction of asbestos fibers, to derive a PCM-asbestos concentration that would enable calculation of an 8-hour time-weighted average (TWA). The estimated 8-hour TWAs ranged from 0.006 to 0.08 fibers per cubic centimeter using a variety of worker exposure scenarios. Therefore, assuming an exposure scenario in which a worker uses power tools to cut and sand products molded from BMMA-5353 and similar products in the manner evaluated in this study, airborne asbestos concentrations should not exceed current or historical occupational exposure limits.

  8. Activation of Transient Receptor Potential Ankyrin-1 by Insoluble Particulate Material and Association with Asthma.

    PubMed

    Deering-Rice, Cassandra E; Shapiro, Darien; Romero, Erin G; Stockmann, Chris; Bevans, Tatjana S; Phan, Quang M; Stone, Bryan L; Fassl, Bernhard; Nkoy, Flory; Uchida, Derek A; Ward, Robert M; Veranth, John M; Reilly, Christopher A

    2015-12-01

    Inhaled irritants activate transient receptor potential ankyrin-1 (TRPA1), resulting in cough, bronchoconstriction, and inflammation/edema. TRPA1 is also implicated in the pathogenesis of asthma. Our hypothesis was that particulate materials activate TRPA1 via a mechanism distinct from chemical agonists and that, in a cohort of children with asthma living in a location prone to high levels of air pollution, expression of uniquely sensitive forms of TRPA1 may correlate with reduced asthma control. Variant forms of TRPA1 were constructed by mutating residues in known functional elements and corresponding to single-nucleotide polymorphisms in functional domains. TRPA1 activity was studied in transfected HEK-293 cells using allyl-isothiocynate, a model soluble electrophilic agonist; 3,5-ditert butylphenol, a soluble nonelectrophilic agonist and a component of diesel exhaust particles; and insoluble coal fly ash (CFA) particles. The N-terminal variants R3C and R58T exhibited greater, but not additive, activity with all three agonists. The ankyrin repeat domain-4 single nucleotide polymorphisms E179K and K186N exhibited decreased response to CFA. The predicted N-linked glycosylation site residues N747A and N753A exhibited decreased responses to CFA, which were not attributable to differences in cellular localization. The pore-loop residue R919Q was comparable to wild-type, whereas N954T was inactive to soluble agonists but not CFA. These data identify roles for ankyrin domain-4, cell surface N-linked glycans, and selected pore-loop domain residues in the activation of TRPA1 by insoluble particles. Furthermore, the R3C and R58T polymorphisms correlated with reduced asthma control for some children, which suggest that TRPA1 activity may modulate asthma, particularly among individuals living in locations prone to high levels of air pollution.

  9. Coculture with intraocular lens material-activated macrophages induces an inflammatory phenotype in lens epithelial cells.

    PubMed

    Pintwala, Robert; Postnikoff, Cameron; Molladavoodi, Sara; Gorbet, Maud

    2015-03-01

    Cataracts are the leading cause of blindness worldwide, requiring surgical implantation of an intraocular lens. Despite evidence of leukocyte ingress into the postoperative lens, few studies have investigated the leukocyte response to intraocular lens materials. A novel coculture model was developed to examine macrophage activation by hydrophilic acrylic (poly(2-hydroxyethyl methacrylate)) and hydrophobic acrylic (polymethylmethacrylate) commercial intraocular lens. The human monocytic cell line THP-1 was differentiated into macrophages and cocultured with human lens epithelial cell line (HLE-B3) with or without an intraocular lens for one, two, four, or six days. Using flow cytometry and confocal microscopy, expression of the macrophage activation marker CD54 (intercellular adhesion molecule-1) and production of reactive oxygen species via the fluorogenic probe 2',7'-dichlorodihydrofluorescein diacetate were examined in macrophages. α-Smooth muscle actin, a transdifferentiation marker, was characterized in lens epithelial cells. The poly(2-hydroxyethyl methacrylate) intraocular lens prevented adhesion but induced significant macrophage activation (p < 0.03) versus control (no intraocular lens), while the polymethylmethacrylate intraocular lens enabled adhesion and multinucleated fusion, but induced no significant activation. Coculture with either intraocular lens increased reactive oxygen species production in macrophages after one day (p < 0.03) and increased expression of α-smooth muscle actin in HLE B-3 after six days, although only poly(2-hydroxyethyl methacrylate) induced a significant difference versus control (p < 0.01). Our results imply that-contrary to prior uveal biocompatibility understanding-macrophage adherence is not necessary for a strong inflammatory response to an intraocular lens, with hydrophilic surfaces inducing higher activation than hydrophobic surfaces. These findings provide a new method of inquiry into uveal

  10. Coculture with intraocular lens material-activated macrophages induces an inflammatory phenotype in lens epithelial cells.

    PubMed

    Pintwala, Robert; Postnikoff, Cameron; Molladavoodi, Sara; Gorbet, Maud

    2015-03-01

    Cataracts are the leading cause of blindness worldwide, requiring surgical implantation of an intraocular lens. Despite evidence of leukocyte ingress into the postoperative lens, few studies have investigated the leukocyte response to intraocular lens materials. A novel coculture model was developed to examine macrophage activation by hydrophilic acrylic (poly(2-hydroxyethyl methacrylate)) and hydrophobic acrylic (polymethylmethacrylate) commercial intraocular lens. The human monocytic cell line THP-1 was differentiated into macrophages and cocultured with human lens epithelial cell line (HLE-B3) with or without an intraocular lens for one, two, four, or six days. Using flow cytometry and confocal microscopy, expression of the macrophage activation marker CD54 (intercellular adhesion molecule-1) and production of reactive oxygen species via the fluorogenic probe 2',7'-dichlorodihydrofluorescein diacetate were examined in macrophages. α-Smooth muscle actin, a transdifferentiation marker, was characterized in lens epithelial cells. The poly(2-hydroxyethyl methacrylate) intraocular lens prevented adhesion but induced significant macrophage activation (p < 0.03) versus control (no intraocular lens), while the polymethylmethacrylate intraocular lens enabled adhesion and multinucleated fusion, but induced no significant activation. Coculture with either intraocular lens increased reactive oxygen species production in macrophages after one day (p < 0.03) and increased expression of α-smooth muscle actin in HLE B-3 after six days, although only poly(2-hydroxyethyl methacrylate) induced a significant difference versus control (p < 0.01). Our results imply that-contrary to prior uveal biocompatibility understanding-macrophage adherence is not necessary for a strong inflammatory response to an intraocular lens, with hydrophilic surfaces inducing higher activation than hydrophobic surfaces. These findings provide a new method of inquiry into uveal

  11. Decanting of Neutralized H-Canyon Unirradiated Nuclear Material High Activity Waste Streams

    SciTech Connect

    BRONIKOWSKI, MICHAELG.

    2004-08-05

    An option to dispose of the High Activity Waste (HAW) stream from the processing of unirradiated materials directly to Saltstone is being evaluated to conserve High Level Waste (HLW) tank farm space and to reduce the future production of HLW glass logs. To meet the Saltstone Waste Acceptance Criteria (WAC), decanting the supernate from precipitated solids was proposed to reduce mercury and radionuclide levels in the waste. Only the caustic supernate will then be sent to Saltstone. Verification that the Saltstone WAC will be met has involved a series of laboratory studies using surrogate and actual HAW solutions from H-Canyon. The initial experiment involved addition of sodium hydroxide (NaOH) to a surrogate HAW test solution and subsequent decanting of the supernate away from the precipitated solids. The chemical composition of the surrogate solution was based on a composition defined from analyses of actual HAW solutions generated during dissolution of unirradiated nuclear materials in H-Canyon [1]. Results from testing the surrogate HAW solution were reported in Reference [2]. Information obtained from the surrogate test solution study was used to define additional experiments on actual HAW solutions obtained from H-Canyon. These experiments were conducted with samples from three different batches of HAW solutions. The first and third HAW samples (HAW No.1 and HAW No.3 solutions) contained the centrifuge filter cake material from a gelatin strike that is periodically added to the waste stream. The second HAW sample (HAW No.2 solution) did not contain filter cake material. Monosodium titanate (MST) was added to the HAW No.2 and HAW No.3 solutions after addition of NaOH was complete and before the settling step. The addition of MST was to improve the decontamination of alpha and beta emitters (primarily plutonium and strontium) from the supernate. The addition of excess NaOH and the addition of MST were expected to result in sufficient alpha and beta

  12. Active millimeter-wave imaging system for material analysis and object detection

    NASA Astrophysics Data System (ADS)

    Zech, Christian; Hülsmann, Axel; Kallfass, Ingmar; Tessmann, Axel; Zink, Martin; Schlechtweg, Michael; Leuther, Arnulf; Ambacher, Oliver

    2011-11-01

    The use of millimeter-waves for imaging purposes is becoming increasingly important, as millimeter-waves can penetrate most clothing and packaging materials, so that the detector does not require physical contact with the object. This will offer a view to the hidden content of e.g. packets or bags without the need to open them, whereby packaging and content will not be damaged. Nowadays X-ray is used, but as the millimeter-wave quantum energy is far below the ionization energy, it is less harmful for the human health. In this paper we report an active millimeter-wave imaging tomograph for material analysis and concealed object detection purposes. The system is build using in-house W-band components. The object is illuminated with low-power millimeter-waves in the frequency range between 89 and 96GHz; mirrors are used to guide and focus the beam. The object is moved through the focus point to scan the object pixel by pixel. Depending on the actual material some parts of the waves are reflected, the other parts penetrate the object. A single-antenna transmit and receive module is used for illumination and measurement of the material-specific reflected power. A second receiver module is used to measure the transmitted wave. All information is processed for amplitude and phase images by a computer algorithm. The system can be used for security, such as detecting concealed weapons, explosives or contrabands at airports and other safety areas, but also quality assurance applications, e.g. during production to detect defects. Some imaging results will be presented in this paper.

  13. Development and qualification of functional materials for the EU Test Blanket Modules: Strategy and R&D activities

    NASA Astrophysics Data System (ADS)

    Zmitko, M.; Poitevin, Y.; Boccaccini, L.; Salavy, J.-F.; Knitter, R.; Möslang, A.; Magielsen, A. J.; Hegeman, J. B. J.; Lässer, R.

    2011-10-01

    Europe has developed two reference tritium breeder blankets concepts for a DEMO fusion reactor: the Helium-Cooled Lithium-Lead and the Helium-Cooled Pebble-Bed. Both will be tested in ITER under the form of Test Blanket Modules (TBMs). The paper reviews the current status of development and qualification of the EU TBMs functional materials; i.e. ceramic solid breeder materials, beryllium/beryllides multiplier materials and Lithium-Lead liquid metal breeder material Pb-15.7Li. For each functional material the main functional/performance requirements with key qualification issues, current status of the R&D activities and the EU development strategy are presented. In the development strategy major steps considered are listed pointing out importance of the 'Development/qualification/procurement plan', currently under elaboration, for definition of a roadmap of further activities aiming at delivery of qualified functional materials to be used in the European TBMs in ITER.

  14. Separation and Enrichment of the Active Component of Carbon Based Paramagnetic Materials for Use in EPR Oximetry

    NASA Astrophysics Data System (ADS)

    Liu, K. J.; Miyake, M.; James, P. E.; Swartz, H. M.

    1998-08-01

    Carbon based paramagnetic materials are frequently used for EPR oximetry, especiallyin vivo,but the EPR spectra of these materials often have more than one paramagnetic center and/or relatively low signal intensity. To determine whether the multi-components of carbon based materials could be separated and enriched in the active component, we used density gradient centrifugation to separate the materials into several fractions. We studied two types of coals, gloxy and Pocahontas, and found these materials to have large density distribution. The separated density fractions had very different EPR spectra and intensities. The active component from the coal material had a more homogeneous EPR signal and significantly increased EPR signal intensity, whereas for India ink, only slight changes were observed. This result can be very useful in the development of better probes for EPR oximetry.

  15. Separation and enrichment of the active component of carbon based paramagnetic materials for use in EPR oximetry.

    PubMed

    Liu, K J; Miyake, M; James, P E; Swartz, H M

    1998-08-01

    Carbon based paramagnetic materials are frequently used for EPR oximetry, especially in vivo, but the EPR spectra of these materials often have more than one paramagnetic center and/or relatively low signal intensity. To determine whether the multi-components of carbon based materials could be separated and enriched in the active component, we used density gradient centrifugation to separate the materials into several fractions. We studied two types of coals, gloxy and Pocahontas, and found these materials to have large density distribution. The separated density fractions had very different EPR spectra and intensities. The active component from the coal material had a more homogeneous EPR signal and significantly increased EPR signal intensity, whereas for India ink, only slight changes were observed. This result can be very useful in the development of better probes for EPR oximetry.

  16. Removal of Pb, Cd, and Cr in a water purification system using modified mineral waste materials and activated carbon derived from waste materials

    NASA Astrophysics Data System (ADS)

    Lu, H. R.; Su, L. C.; Ruan, H. D.

    2016-08-01

    This study attempts to find out and optimize the removal efficiency of heavy metals in a water purification unit using a low-cost waste material and modified mineral waste materials (MMWM) accompanied with activated carbon (AC) derived from waste materials. The factors of the inner diameter of the purification unit (2.6-5cm), the height of the packing materials (5-20cm), the size of AC (200-20mesh), the size of MMWM (1-0.045mm), and the ratio between AC and MMWM in the packing materials (1:0 - 0:1) were examined based on a L18 (5) 3 orthogonal array design. In order to achieve an optimally maximum removal efficiency, the factors of the inner diameter of the purification unit (2.6-7.5cm), the height of the packing materials (10-30cm), and the ratio between AC and MMWM in the packing materials (1:4-4:1) were examined based on a L16 (4) 3 orthogonal array design. A height of 25cm, inner diameter of 5cm, ratio between AC and MMWM of 3:2 with size of 60-40mesh and 0.075-0.045mm, respectively, were the best conditions determined by the ICP-OES analysis to perform the adsorption of heavy metals in this study.

  17. Crossing Cultures--Third World Women. A Book of Materials, Activities, and Ideas for the Classroom Teacher.

    ERIC Educational Resources Information Center

    Valiant, Sharon

    This resource bibliography includes and briefly discusses activities and instructional materials on the lives of women in the non-European/non-white world, suitable for use in elementary and secondary school rooms. The books, films, and other materials give a sampling of ideas and contributions often overlooked in middle-class America (for…

  18. Gamma activity of stream sediment feldspars as ceramic raw materials and their environmental impact.

    PubMed

    Aboelkhair, Hatem; Ibrahim, Tarek; Saad, Ahmed

    2012-08-01

    In situ gamma spectrometric measurements have been performed to characterise the natural radiation that emitted from the stream sediment feldspars in Wadi El Missikat and Wadi Homret El Gergab, Eastern Desert, Egypt. The measurements of potassium (K, %), equivalent uranium (eU, ppm) and equivalent thorium (eTh, ppm) were converted into specific activities and equivalent dose rate. The average specific activities were 1402 Bq kg(-1) for K, 113 Bq kg(-1) for eU and 108 Bq kg(-1) for eTh in Wadi El Missikat, while they were 1240, 104 and 185 Bq kg(-1) in Wadi Homret El Gergab. The calculated outdoor average effective dose rates was 1.1 mSv y(-1) in wadi El Missikat and 1.3 mSv y(-1) in Wadi Homret El Gergab. The terrestrial-specific activities and effective dose rate levels of the natural radioactivity in the two areas lie within the international recommended limits for occupational feldspar quarry workers. On the other hand, these results indicated that irradiation is higher than the allowable level for members of the public. Therefore, quarrying the feldspar sediments from these locations as ceramic raw materials may yield an undesired impact on the environment, especially through the indoor applications. PMID:22171098

  19. Investigation of Active Interrogation Techniques to Detect Special Nuclear Material in Maritime Environments

    SciTech Connect

    Miller, Thomas Martin; Patton, Bruce W

    2010-01-01

    The detection and interdiction of special nuclear material (SNM) is still a high-priority focus area for many organizations around the world. One method that is commonly considered a leading candidate in the detection of SNM is active interrogation (AI). AI is different from its close relative, passive interrogation, in that an active source is used to enhance or create a detectable signal (usually fission) from SNM, particularly in shielded scenarios or scenarios where the SNM has a low activity. The use of AI thus makes the detection of SNM easier or, in some scenarios, even enables previously impossible detection. In this work the signal from prompt neutrons and photons as well as delayed neutrons and photons will be combined, as is typically done in AI. In previous work AI has been evaluated experimentally and computationally. However, for the purposes of this work, past scenarios are considered lightly shielded and tightly coupled spatially. At most, the previous work interrogated the contents of one standard cargo container (2.44 x 2.60 x 6.10 m) and the source and detector were both within a few meters of the object being interrogated. A few examples of this type of previous work can be found in references 1 and 2. Obviously, more heavily shielded AI scenarios will require larger source intensities, larger detector surface areas (larger detectors or more detectors), greater detector efficiencies, longer count times, or some combination of these.

  20. Gamma activity of stream sediment feldspars as ceramic raw materials and their environmental impact.

    PubMed

    Aboelkhair, Hatem; Ibrahim, Tarek; Saad, Ahmed

    2012-08-01

    In situ gamma spectrometric measurements have been performed to characterise the natural radiation that emitted from the stream sediment feldspars in Wadi El Missikat and Wadi Homret El Gergab, Eastern Desert, Egypt. The measurements of potassium (K, %), equivalent uranium (eU, ppm) and equivalent thorium (eTh, ppm) were converted into specific activities and equivalent dose rate. The average specific activities were 1402 Bq kg(-1) for K, 113 Bq kg(-1) for eU and 108 Bq kg(-1) for eTh in Wadi El Missikat, while they were 1240, 104 and 185 Bq kg(-1) in Wadi Homret El Gergab. The calculated outdoor average effective dose rates was 1.1 mSv y(-1) in wadi El Missikat and 1.3 mSv y(-1) in Wadi Homret El Gergab. The terrestrial-specific activities and effective dose rate levels of the natural radioactivity in the two areas lie within the international recommended limits for occupational feldspar quarry workers. On the other hand, these results indicated that irradiation is higher than the allowable level for members of the public. Therefore, quarrying the feldspar sediments from these locations as ceramic raw materials may yield an undesired impact on the environment, especially through the indoor applications.

  1. 3-d Brownian dynamics simulations of the smallest units of an active biological material

    NASA Astrophysics Data System (ADS)

    Luettmer-Strathmann, Jutta; Paudyal, Nabina; Adeli Koudehi, Maral

    Motor proteins generate stress in a cytoskeletal network by walking on one strand of the network while being attached to another one. A protein walker in contact with two elements of the network may be considered the smallest unit of an active biological material. In vitro experiments, mathematical modeling and computer simulations have provided important insights into active matter on large and on very small length and time scales. However, it is still difficult to model the effects of local environment and interactions at intermediate scales. Recently, we developed a coarse-grained, three-dimensional model for a motor protein transporting cargo by walking on a substrate. In this work, we simulate a tethered motor protein pulling a substrate with elastic response. As the walker progresses, the retarding force due to the substrate tension increases until contact fails. We present simulation results for the effect of motor-protein activity on the tension in the substrate and the effect of the retarding force on the processivity of the molecular motor.

  2. Analysis of Induced Gamma Activation by D-T Neutrons in Selected Fusion Reactor Relevant Materials with EAF-2010

    NASA Astrophysics Data System (ADS)

    Klix, Axel; Fischer, Ulrich; Gehre, Daniel

    2016-02-01

    Samples of lanthanum, erbium and titanium which are constituents of structural materials, insulating coatings and tritium breeder for blankets of fusion reactor designs have been irradiated in a fusion peak neutron field. The induced gamma activities were measured and the results were used to check calculations with the European activation system EASY-2010. Good agreement for the prediction of major contributors to the contact dose rate of the materials was found, but for minor contributors the calculation deviated up to 50%.

  3. Exploring the Geometry of Circumnuclear Material in Active Galactic Nuclei through X-ray Spectroscopy

    NASA Astrophysics Data System (ADS)

    Rivers, Elizabeth

    I have studied the X-ray spectral properties of active galactic nuclei (AGN) in order to gain a better understanding of the nature of the circumnuclear material surrounding the central black hole in these objects. From the RXTE archive I constructed two survey samples of broad band X-ray spectra. The first was a bright sample of 23 AGN that had high quality spectra up to at least 100 keV, which provided constraints on the high energy rollover expected by models of inverse Comptonization of low energy photons. The average lower limit to Eroll was ˜225 keV for the majority of objects, implying a coronal electron temperature of kB Te ≳ 75 keV for these models. The second sample was an expanded survey of ˜100 AGN for which spectral parameters could be well-determined. I compared Fe line equivalent widths with measured Compton reflection hump strengths and found that on average ˜40% of the Fe line emission comes from reflection off Compton-thick material, with the remainder likely arising in isotropic emission from Compton-thin gas. In the full sample, the distributions of photon indices for Seyfert 1's and 2's were consistent with the idea that Seyferts share a common central engine, however the distributions of Compton reflection hump strengths did not support the classical picture of absorption by a torus and reflection off a Compton-thick disk with type depending only on inclination angle. I have concluded that a more complex reflecting geometry such as a combined disk and torus or clumpy torus is likely a more accurate picture of the Compton-thick material. I have performed additional analyses of individual objects. An occultation event in Cen A, discovered through RXTE monitoring, revealed the clumpy nature of its torus and placed constraints on the amount of material in the vicinity of the black hole in this object. A Suzaku long-look observation of MCG-2-58-22 provided constraints on the location of Fe line emitting material to ≳ 1200RS, likely associated

  4. Biological and Phytopharmacological Descriptions of Litchi Chinensis.

    PubMed

    Kilari, Eswar Kumar; Putta, Swathi

    2016-01-01

    Plants remain a vital source of drugs and at present, much emphasis is given to nutraceuticals. Herbal medicines have been the basis of treatment and cure for various diseases and physiological conditions in the traditional methods practiced such as ayurveda and homeopathy. Litchi chinensis belongs to the Sapindaceae family and is well-known in the Indian traditional system for its traditional uses. The parts of the plant used are leaves, flowers, fruits, seed, pulp, and pericarp. All parts of the plant are rich sources of phytochemicals--epicatechin; procyanidin A2 and procyanidin B2; leucocyanidin; cyanidin glycoside, malvidin glycoside, and saponins; butylated hydroxytoluene; isolariciresinol; kaempferol; rutin; and stigmasterol. In the present review, we explore the lychee's description, traditional medicinal uses, and phytoconstituents, and investigate the pharmacological activities in various parts of the lychee to show its importance in ethanopharmacology. This is so that this review can serve as a ready-to-use material for further research on the plant.

  5. 101 Environmental Education Activities. Booklet 1--Art and Music Activities.

    ERIC Educational Resources Information Center

    Whitney, Helen, Comp.

    First of a series of 6 publications containing environmental education activities, this booklet by the Upper Mississippi River ECO-Center describes 12 environmentally-based art and music activities for elementary and intermediate grades. Each activity description contains objectives, preparation, materials, directions, student evaluation, and…

  6. Photocatalytic degradation of an azo-dye on TiO2/activated carbon composite material.

    PubMed

    Andriantsiferana, C; Mohamed, E F; Delmas, H

    2014-01-01

    A sequential adsorption/photocatalytic regeneration process to remove tartrazine, an azo-dye in aqueous solution, has been investigated. The aim ofthis work was to compare the effectiveness of an adsorbent/photocatalyst composite-TiO2 deposited onto activated carbon (AC) - and a simple mixture of powders of TiO2 and AC in same proportion. The composite was an innovative material as the photocatalyst, TiO2, was deposited on the porous surface ofa microporous-AC using metal-organic chemical vapour deposition in fluidized bed. The sequential process was composed of two-batch step cycles: every cycle alternated a step of adsorption and a step of photocatalytic oxidation under ultra-violet (365 nm), at 25 degreeC and atmospheric pressure. Both steps, adsorption and photocatalytic oxidation, have been investigated during four cycles. For both materials, the cumulated amounts adsorbed during four cycles corresponded to nearly twice the maximum adsorption capacities qmax proving the photocatalytic oxidation to regenerate the adsorbent. Concerning photocatalytic oxidation, the degree of mineralization was higher with the TiO2/AC composite: for each cycle, the value of the total organic carbon removal was 25% higher than that obtained with the mixture powder. These better photocatalytic performances involved better regeneration than higher adsorbed amounts for cycles 2, 3 and 4. Better performances with this promising material - TiO2 deposited onto AC - compared with TiO2 powder could be explained by the vicinity of photocatalytic and AC adsorption sites.

  7. Science-based material modeling activities at Sandia National Laboratories/California : an overview.

    SciTech Connect

    Chen, Er-Ping

    2004-08-01

    The purpose of this presentation is to provide an overview of the science-based materials modeling activities at Sandia National Laboratories, California. The main mission driver for the work is the development of predictive modeling and simulation capabilities leveraging high performance computing software and hardware. Presentation will highlight research accomplishments in several specific topics of current interest. Sandia/California has been engaged in the development of high performance computing based predictive modeling and simulation capabilities in support of the Science-Based Stockpile Stewardship Program of the U. S. Department of Energy. Of particular interest is the development of constitutive models that can efficiently and accurately predict post-failure material response and load-redistribution in systems and components. Fracture and failure are inherently multi-scale and our philosophy is to include required physics in our models at all appropriate scales. We approach the problems from the continuum point of view and intend to provide continuum models that include dominant subscale mechanisms. Moreover, numerical algorithms are needed to allow implementation of physical models in high performance computing codes such that large-scale modeling and simulation can be conducted. Other drivers of our effort include the emerging application of micro- and nano-systems and the increasing interest in biotechnology. In this presentation, our research in fracture and failure modeling, atomic-continuum coupling code development, microstructure-material properties relationships exploration, and general continuum theories advancement will be presented. Where appropriate, examples will be given to demonstrate the utility of the models.

  8. Effects of coal rank on the chemical composition and toxicological activity of coal liquefaction materials

    SciTech Connect

    Wright, C.W.; Dauble, D.D.

    1986-05-01

    This report presents data from the chemical analysis and toxicological testing of coal liquefaction materials from the EDS and H-Coal processes operated using different ranks of coal. Samples of recycle solvent from the bottoms recycle mode of the EDS direct coal liquefaction process derived from bituminous, sub-bituminous, and lignite coals were analyzed. In addition, the H-Coal heavy fuel oils derived from bituminous and sub-bituminous coals were analyzed. Chemical methods of analysis included adsoprtion column chromatography, high-resolution gas chromatography, gas chromatography/mass spectrometry, and low-voltage probe-inlet mass spectrometry. The toxicological activity of selected samples was evaluated using the standard microbial mutagenicity assay, an initiation/promotion assay for mouse-skin tumorigenicity, and a static bioassy with Daphnia magna for aquatic toxicity of the water-soluble fractions. 22 refs., 16 figs., 14 tabs.

  9. [Application of biologically active suture materials in emergency surgery of abdominal cavity organs].

    PubMed

    Mokhov, E M; Chumakov, R Iu; Sergeev, A N

    2012-01-01

    An investigation of specific course of the wound process and near results of operations on 398 patients with emergency abdominal surgical pathology has revealed advantages of using new biologically active suture materials "Nikant" (with doxicyclin) and "Nikant-P" (with doxicyclin and stimulator of regeneration from the group of hermanium-containing organic compounds) in performing surgical interventions. Total number of patients with complications at the early postoperative period, operated using threads "Nikant" (38-29.9%) and "Nikant-P" (30-23.8%) proved to be reliably less than in patients of the control group (71-48.9%). The results of operations improved at the expense of considerable reduction of the number of postoperative local pyo-inflammatory processes.

  10. Neutron Activation Analysis of the Rare Earth Elements (REE) - With Emphasis on Geological Materials

    NASA Astrophysics Data System (ADS)

    Stosch, Heinz-Günter

    2016-08-01

    Neutron activation analysis (NAA) has been the analytical method of choice for rare earth element (REE) analysis from the early 1960s through the 1980s. At that time, irradiation facilitieswere widely available and fairly easily accessible. The development of high-resolution gamma-ray detectors in the mid-1960s eliminated, formany applications, the need for chemical separation of the REE from the matrix material, making NAA a reliable and effective analytical tool. While not as precise as isotopedilution mass spectrometry, NAA was competitive by being sensitive for the analysis of about half of the rare earths (La, Ce, Nd, Sm, Eu, Tb, Yb, Lu). The development of inductively coupled plasma mass spectrometry since the 1980s, together with decommissioning of research reactors and the lack of installation of new ones in Europe and North America has led to the rapid decline of NAA.

  11. Metal-ion spin-on glasses: Novel materials for active waveguides

    SciTech Connect

    Ashby, C.I.H.; Sullivan, C.T.; Vawter, G.A.; Hohimer, J.P.; Hadley, G.R.; Neal, D.R.

    1993-12-31

    Monolithic integration of a rare-earth-ion-based active waveguide on the same wafer as its diode pump laser would permit compact packaging of the technology demonstrated in fiber lasers and amplifiers. This new monolithic technology would offer the potential for developing compact infrared and visible (up-conversion) lasers, amplifiers, and other photonic integrated circuit components. One approach that we are investigating for such monolithic integration uses a high concentration of one or more rare-earth ions incorporated into polysiloxane spin-on glasses that are solvent-cast onto III-V semiconductor wafers. This ``fiber on a chip`` technology substitute a relatively high-ion-concentration, short-length metal-ion spin-on glass (MISOG) waveguide for the low-ion-concentration, long-length fiber. Progress to data on developing MISOG waveguide materials and technology is discussed.

  12. Materials for the active layer of organic photovoltaics: ternary solar cell approach.

    PubMed

    Chen, Yung-Chung; Hsu, Chih-Yu; Lin, Ryan Yeh-Yung; Ho, Kuo-Chuan; Lin, Jiann T

    2013-01-01

    Power conversion efficiencies in excess of 7% have been achieved with bulk heterojunction (BHJ)-type organic solar cells using two components: p- and n-doped materials. The energy level and absorption profile of the active layer can be tuned by introduction of an additional component. Careful design of the additional component is required to achieve optimal panchromatic absorption, suitable energy-level offset, balanced electron and hole mobility, and good light-harvesting efficiency. This article reviews the recent progress on ternary organic photovoltaic systems, including polymer/small molecule/functional fullerene, polymer/polymer/functional fullerene, small molecule/small molecule/functional fullerene, polymer/functional fullerene I/functional fullerene II, and polymer/quantum dot or metal/functional fullerene systems.

  13. Viscoelasticity of living materials: mechanics and chemistry of muscle as an active macromolecular system.

    PubMed

    Qian, Hong

    2008-06-01

    At the molecular and cellular level, mechanics and chemistry are two aspects of the same macromolecular system. We present a bottom-up approach to such systems based on Kramers' diffusion theory of chemical reactions, the theory of polymer dynamics, and the recently developed models for molecular motors. Using muscle as an example, we develop a viscoelastic theory of muscle in terms of an simple equation for single motor protein movement. Both A.V. Hill's contractile component and A.F. Huxley's equation of sliding-filament motion are shown to be special cases of the general viscoelastic theory of the active material. Some disparity between the mechanical and the chemical views of cross-bridges and motor proteins are noted, and a duality between force and energy in discrete states and transitions of macromolecular systems is discussed.

  14. Processes for making dense, spherical active materials for lithium-ion cells

    DOEpatents

    Kang, Sun-Ho; Amine, Khalil

    2011-11-22

    Processes are provided for making dense, spherical mixed-metal carbonate or phosphate precursors that are particularly well suited for the production of active materials for electrochemical devices such as lithium ion secondary batteries. Exemplified methods include precipitating dense, spherical particles of metal carbonates or metal phosphates from a combined aqueous solution using a precipitating agent such as ammonium hydrogen carbonate, sodium hydrogen carbonate, or a mixture that includes sodium hydrogen carbonate. Other exemplified methods include precipitating dense, spherical particles of metal phosphates using a precipitating agent such as ammonium hydrogen phosphate, ammonium dihydrogen phosphate, sodium phosphate, sodium hydrogen phosphate, sodium dihydrogen phosphate, or a mixture of any two or more thereof. Further provided are compositions of and methods of making dense, spherical metal oxides and metal phosphates using the dense, spherical metal precursors. Still further provided are electrodes and batteries using the same.

  15. Multimedia content description framework

    NASA Technical Reports Server (NTRS)

    Bergman, Lawrence David (Inventor); Kim, Michelle Yoonk Yung (Inventor); Li, Chung-Sheng (Inventor); Mohan, Rakesh (Inventor); Smith, John Richard (Inventor)

    2003-01-01

    A framework is provided for describing multimedia content and a system in which a plurality of multimedia storage devices employing the content description methods of the present invention can interoperate. In accordance with one form of the present invention, the content description framework is a description scheme (DS) for describing streams or aggregations of multimedia objects, which may comprise audio, images, video, text, time series, and various other modalities. This description scheme can accommodate an essentially limitless number of descriptors in terms of features, semantics or metadata, and facilitate content-based search, index, and retrieval, among other capabilities, for both streamed or aggregated multimedia objects.

  16. Improvement Characteristics of Bio-active Materials Coated Fabric on Rat Muscular Mitochondria.

    PubMed

    Lee, Donghee; Kim, Young-Won; Kim, Jung-Ha; Yang, Misuk; Bae, Hyemi; Lim, Inja; Bang, Hyoweon; Go, Kyung-Chan; Yang, Gwang-Wung; Rho, Yong-Hwan; Park, Hyo-Suk; Park, Eun-Ho; Ko, Jae-Hong

    2015-05-01

    This study surveys the improvement characteristics in old-aged muscular mitochondria by bio-active materials coated fabric (BMCF). To observe the effects, the fabric (10 and 30%) was worn to old-aged rat then the oxygen consumption efficiency and copy numbers of mitochondria, and mRNA expression of apoptosis- and mitophagy-related genes were verified. By wearing the BMCF, the oxidative respiration significantly increased when using the 30% materials coated fabric. The mitochondrial DNA copy number significantly decreased and subsequently recovered in a dose-dependent manner. The respiratory control ratio to mitochondrial DNA copy number showed a dose-dependent increment. As times passed, Bax, caspase 9, PGC-1α and β-actin increased, and Bcl-2 decreased in a dose-dependent manner. However, the BMCF can be seen to have had no effect on Fas receptor. PINK1 expression did not change considerably and was inclined to decrease in control group, but the expression was down-regulated then subsequently increased with the use of the BMCF in a dose-dependent manner. Caspase 3 increased and subsequently decreased in a dose-dependent manner. These results suggest that the BMCF invigorates mitophagy and improves mitochondrial oxidative respiration in skeletal muscle, and in early stage of apoptosis induced by the BMCF is not related to extrinsic death-receptor mediated but mitochondria-mediated signaling pathway.

  17. Comparing graphene, carbon nanotubes, and superfine powdered activated carbon as adsorptive coating materials for microfiltration membranes.

    PubMed

    Ellerie, Jaclyn R; Apul, Onur G; Karanfil, Tanju; Ladner, David A

    2013-10-15

    Multi-walled carbon nanotubes (MWCNTs), nano-graphene platelets (NGPs), and superfine powdered activated carbon (S-PAC) were comparatively evaluated for their applicability as adsorptive coatings on microfiltration membranes. The objective was to determine which materials were capable of contaminant removal while causing minimal flux reduction. Methylene blue and atrazine were the model contaminants. When applied as membrane coatings, MWCNTs had minimal retention capabilities for the model contaminants, and S-PAC had the fastest removal. The membrane coating approach was also compared with a stirred vessel configuration, in which the adsorbent was added to a stirred flask preceding the membrane cell. Direct application of the adsorbent to the membrane constituted a greater initial reduction in permeate concentrations of the model contaminants than with the stirred flask setup. All adsorbents except S-PAC showed flux reductions less than 5% after application as thin-layer membrane coatings, and flux recovery after membrane backwashing was greater than 90% for all materials and masses tested. PMID:23911830

  18. Imaging of heterogeneous materials by prompt gamma-ray neutron activation analysis

    SciTech Connect

    Staples, P.; Prettyman, T.; Lestone, J.

    1998-12-01

    The authors have used a tomographic gamma scanner (TGS) to produce tomographic prompt gamma-ray neutron activation analysis imaging (PGNAA) of heterogeneous matrices. The TGS was modified by the addition of graphite reflectors that contain isotopic neutron sources for sample interrogation. The authors are in the process of developing the analysis methodology necessary for a quantitative assay of large containers of heterogeneous material. This nondestructive analysis (NDA) technique can be used for material characterization and the determination of neutron assay correction factors. The most difficult question to be answered is the determination of the source-to-sample coupling term. To assist in the determination of the coupling term, the authors have obtained images for a range of sample that are very well characterized, such as, homogenous pseudo one-dimensional samples to three-dimensional heterogeneous samples. They then compare the measurements to MCNP calculations. For an accurate quantitative measurement, it is also necessary to determine the sample gamma-ray self attenuation at higher gamma-ray energies, namely pair production should be incorporated into the analysis codes.

  19. Recommended procedures and methodology of coal description

    USGS Publications Warehouse

    Chao, E.C.; Minkin, J.A.; Thompson, C.L.

    1983-01-01

    This document is the result of a workshop on coal description held for the Branch of Coal Resources of the U.S. Geological Survey in March 1982. It has been prepared to aid and encourage the field-oriented coal scientist to participate directly in petrographic coal-description activities. The objectives and past and current practices of coal description vary widely. These are briefly reviewed and illustrated with examples. Sampling approaches and techniques for collecting columnar samples of fresh coal are also discussed. The recommended procedures and methodology emphasize the fact that obtaining a good megascopic description of a coal bed is much better done in the laboratory with a binocular microscope and under good lighting conditions after the samples have been cut and quickly prepared. For better observation and cross-checking using a petrographic microscope for identification purposes, an in-place polishing procedure (requiring less than 2 min) is routinely used. Methods for using both the petrographic microscope and an automated image analysis system are also included for geologists who have access to such instruments. To describe the material characteristics of a coal bed in terms of microlithotypes or lithotypes, a new nomenclature of (V), (E), (1), (M). (S). (X1). (X2) and so on is used. The microscopic description of the modal composition of a megascopically observed lithologic type is expressed in terms of (VEIM); subscripts are used to denote the volume percentage of each constituent present. To describe a coal-bed profile, semiquantitative data (without microscopic study) and quantitative data (with microscopic study) are presented in ready-to-understand form. The average total composition of any thickness interval or of the entire coal bed can be plotted on a triangular diagram having V, E, and I+ M +S as the apices. The modal composition of any mixed lithologies such as (X1), (X2), and so on can also be plotted on such a triangular ternary diagram

  20. Crime and Justice: 10 Activities.

    ERIC Educational Resources Information Center

    Constitutional Rights Foundation, Los Angeles, CA.

    This manual contains learning activities to aid secondary teachers in clarifying and enriching the Scholastic materials "Living Law." The format of the manual includes a brief overview, background information, teacher instructions, and a description of each activity. Case studies, simulations, and role-playing activities are provided. Topics…

  1. Regulation of Synaptic Vesicle Docking by Different Classes of Macromolecules in Active Zone Material

    PubMed Central

    Szule, Joseph A.; Harlow, Mark L.; Jung, Jae Hoon; De-Miguel, Francisco F.; Marshall, Robert M.; McMahan, Uel J.

    2012-01-01

    The docking of synaptic vesicles at active zones on the presynaptic plasma membrane of axon terminals is essential for their fusion with the membrane and exocytosis of their neurotransmitter to mediate synaptic impulse transmission. Dense networks of macromolecules, called active zone material, (AZM) are attached to the presynaptic membrane next to docked vesicles. Electron tomography has shown that some AZM macromolecules are connected to docked vesicles, leading to the suggestion that AZM is somehow involved in the docking process. We used electron tomography on the simply arranged active zones at frog neuromuscular junctions to characterize the connections of AZM to docked synaptic vesicles and to search for the establishment of such connections during vesicle docking. We show that each docked vesicle is connected to 10–15 AZM macromolecules, which fall into four classes based on several criteria including their position relative to the presynaptic membrane. In activated axon terminals fixed during replacement of docked vesicles by previously undocked vesicles, undocked vesicles near vacated docking sites on the presynaptic membrane have connections to the same classes of AZM macromolecules that are connected to docked vesicles in resting terminals. The number of classes and the total number of macromolecules to which the undocked vesicles are connected are inversely proportional to the vesicles’ distance from the presynaptic membrane. We conclude that vesicle movement toward and maintenance at docking sites on the presynaptic membrane are directed by an orderly succession of stable interactions between the vesicles and distinct classes of AZM macromolecules positioned at different distances from the membrane. Establishing the number, arrangement and sequence of association of AZM macromolecules involved in vesicle docking provides an anatomical basis for testing and extending concepts of docking mechanisms provided by biochemistry. PMID:22438915

  2. Describing Nanomaterials: A Uniform Description System

    NASA Astrophysics Data System (ADS)

    Rumble, John; Freiman, Steve; Teague, Clayton

    2014-03-01

    Products involving nanomaterials are growing rapidly and nanoparticles also occur naturally. Materials, scientists, engineers, health officials, and regulators have realized they need a common description system. Led by CODATA and VAMAS, a Uniform Description System (UDS) for nanomaterials is being developed to meet the requirements of a broad range of scientific and technical disciplines and different user communities. The goal of the CODATA/VAMAS effort is the creation of a complete set of descriptors that can be used by all communities, e.g., materials, physics, chemistry, agricultural, medical, etc., interested in nanomaterials. The description system must be relevant to researchers, manufacturers of nanomaterials, materials selectors, and regulators. The purpose of the UDS for materials on the nanoscale is twofold: Uniqueness and Equivalency. The first step in the development of the UDS has been the creation of a Framework that will be used by the different communities to guide in the selection of descriptors relevant to their needs. This talk is a brief description of the draft of such a Framework, and how the framework will be translated into a robust description system with input from many scientific communities including physics. A contribution from the CODATA/VAMAS Working Group on the Description of Nanomaterials.

  3. Monte-Carlo modelling of nano-material photocatalysis: bridging photocatalytic activity and microscopic charge kinetics.

    PubMed

    Liu, Baoshun

    2016-04-28

    In photocatalysis, it is known that light intensity, organic concentration, and temperature affect the photocatalytic activity by changing the microscopic kinetics of holes and electrons. However, how the microscopic kinetics of holes and electrons relates to the photocatalytic activity was not well known. In the present research, we developed a Monte-Carlo random walking model that involved all of the charge kinetics, including the photo-generation, the recombination, the transport, and the interfacial transfer of holes and electrons, to simulate the overall photocatalytic reaction, which we called a "computer experiment" of photocatalysis. By using this model, we simulated the effect of light intensity, temperature, and organic surface coverage on the photocatalytic activity and the density of the free electrons that accumulate in the simulated system. It was seen that the increase of light intensity increases the electron density and its mobility, which increases the probability for a hole/electron to find an electron/hole for recombination, and consequently led to an apparent kinetics that the quantum yield (QY) decreases with the increase of light intensity. It was also seen that the increase of organic surface coverage could increase the rate of hole interfacial transfer and result in the decrease of the probability for an electron to recombine with a hole. Moreover, the increase of organic coverage on the nano-material surface can also increase the accumulation of electrons, which enhances the mobility for electrons to undergo interfacial transfer, and finally leads to the increase of photocatalytic activity. The simulation showed that the temperature had a more complicated effect, as it can simultaneously change the activation of electrons, the interfacial transfer of holes, and the interfacial transfer of electrons. It was shown that the interfacial transfer of holes might play a main role at low temperature, with the temperature-dependence of QY

  4. Monte-Carlo modelling of nano-material photocatalysis: bridging photocatalytic activity and microscopic charge kinetics.

    PubMed

    Liu, Baoshun

    2016-04-28

    In photocatalysis, it is known that light intensity, organic concentration, and temperature affect the photocatalytic activity by changing the microscopic kinetics of holes and electrons. However, how the microscopic kinetics of holes and electrons relates to the photocatalytic activity was not well known. In the present research, we developed a Monte-Carlo random walking model that involved all of the charge kinetics, including the photo-generation, the recombination, the transport, and the interfacial transfer of holes and electrons, to simulate the overall photocatalytic reaction, which we called a "computer experiment" of photocatalysis. By using this model, we simulated the effect of light intensity, temperature, and organic surface coverage on the photocatalytic activity and the density of the free electrons that accumulate in the simulated system. It was seen that the increase of light intensity increases the electron density and its mobility, which increases the probability for a hole/electron to find an electron/hole for recombination, and consequently led to an apparent kinetics that the quantum yield (QY) decreases with the increase of light intensity. It was also seen that the increase of organic surface coverage could increase the rate of hole interfacial transfer and result in the decrease of the probability for an electron to recombine with a hole. Moreover, the increase of organic coverage on the nano-material surface can also increase the accumulation of electrons, which enhances the mobility for electrons to undergo interfacial transfer, and finally leads to the increase of photocatalytic activity. The simulation showed that the temperature had a more complicated effect, as it can simultaneously change the activation of electrons, the interfacial transfer of holes, and the interfacial transfer of electrons. It was shown that the interfacial transfer of holes might play a main role at low temperature, with the temperature-dependence of QY

  5. Process for forming a homogeneous oxide solid phase of catalytically active material

    DOEpatents

    Perry, Dale L.; Russo, Richard E.; Mao, Xianglei

    1995-01-01

    A process is disclosed for forming a homogeneous oxide solid phase reaction product of catalytically active material comprising one or more alkali metals, one or more alkaline earth metals, and one or more Group VIII transition metals. The process comprises reacting together one or more alkali metal oxides and/or salts, one or more alkaline earth metal oxides and/or salts, one or more Group VIII transition metal oxides and/or salts, capable of forming a catalytically active reaction product, in the optional presence of an additional source of oxygen, using a laser beam to ablate from a target such metal compound reactants in the form of a vapor in a deposition chamber, resulting in the deposition, on a heated substrate in the chamber, of the desired oxide phase reaction product. The resulting product may be formed in variable, but reproducible, stoichiometric ratios. The homogeneous oxide solid phase product is useful as a catalyst, and can be produced in many physical forms, including thin films, particulate forms, coatings on catalyst support structures, and coatings on structures used in reaction apparatus in which the reaction product of the invention will serve as a catalyst.

  6. Heterostereocomplexation between biodegradable and optically active polyesters as a versatile preparation method for biodegradable materials.

    PubMed

    Tsuji, Hideto; Yamamoto, Satomi; Okumura, Ayaka; Sugiura, Yu

    2010-01-11

    The thermal properties and crystallization of biodegradable and optically active poly[(S)-2-hydroxybutyrate] [P(S-2HB)], poly(l-lactide) (PLLA), poly(d-lactide) (PDLA) and their blends were investigated. The results of differential scanning calorimetry, wide-angle X-ray scattering (WAXS), and polarized optical microscopy first indicated heterostereocomplexation between biodegradable and optically active polyesters having different chemical structures and opposite configurations, that is, P(S-2HB) and PDLA. The melting temperature of the heterostereocomplex was higher than those of pure polymers. Such cocrystallization was not observed for P(S-2HB)/PLLA blends having identical configurations. The WAXS profile of P(S-2HB)/PDLA heterostereocomplex was very similar to those of the PLLA/PDLA and P(S-2HB)/P(R-2HB) homostereocomplexes and each crystalline diffraction peak of the heterostereocomplex was located between those of the homostereocomplexes. The present study strongly suggests that heterostereocomplexation will provide a novel versatile method for preparing biodegradable polyester materials with a wide range of physical properties and biodegradability.

  7. Electric field responsive origami structures using electrostriction-based active materials

    NASA Astrophysics Data System (ADS)

    Ahmed, Saad; Arrojado, Erika; Sigamani, Nirmal; Ounaies, Zoubeida

    2015-04-01

    The objective of origami engineering is to combine origami principles with advanced materials to yield active origami shapes, which fold and unfold in response to external stimuli. We are investigating the use of P(VDF-TrFE-CTFE), a relaxor ferroelectric terpolymer, to realize origami-inspired folding and unfolding of structures and to actuate so-called action origami structures. To accomplish these two objectives, we have explored different approaches to the P(VDF-TrFECTFE) polymer actuator construction, ranging from unimorph to multilayered stacks. Electromechanical characterization of the terpolymer-based actuators is conducted with a focus on free strain, force-displacement and blocked force. Moreover dynamic thickness strains of P(VDF-TrFE-CTFE) terpolymer at different frequencies ranging from 0.1Hz to 10Hz is also measured. Quantifying the performance of terpolymer-based actuators is important to the design of action origami structures. Following these studies, action origami prototypes based on catapult, flapping butterfly wings and barking fox are actuated and characterization of these prototypes are conducted by studying impact of various parameters such as electric field magnitude and frequency, number of active layers, and actuator dimensions.

  8. Electrospun carbon nanofibers from polyacrylonitrile blended with activated or graphitized carbonaceous materials for improving anodic bioelectrocatalysis.

    PubMed

    Patil, Sunil A; Chigome, Samuel; Hägerhäll, Cecilia; Torto, Nelson; Gorton, Lo

    2013-03-01

    The electrospun carbon nanofibers obtained from polyacrylonitrile (PAN) and PAN blends with either activated carbon (PAN-AC) or graphite (PAN-GR) were tested as anodes using Shewanella oneidensis MR-1. Extensive physico-chemical and electrochemical characterization confirmed their formation, their fibrous and porous nature, and their suitability as electrodes. N2 adsorption measurements revealed high specific surface area (229.8, 415.8 and 485.2m(2) g(-1)) and porosity (0.142, 0.202 and 0.239cm(3)g(-1)) for PAN, PAN-AC and PAN-GR, respectively. The chronoamperometric measurements showed a considerable decrease in start-up time and more than a 10-fold increase in the generation of current with these electrodes (115, 139 and 155μAcm(-2) for PAN, PAN-AC and PAN-GR, respectively) compared to the graphite electrode (11.5μAcm(-2)). These results indicate that the bioelectrocatalysis benefits from the blending of PAN with activated or graphitized carbonaceous materials, presumably due to the increased specific surface area, total pore volume and modification of the carbon microstructure. PMID:23399497

  9. Facile and green synthesis of palladium nanoparticles-graphene-carbon nanotube material with high catalytic activity.

    PubMed

    Sun, Tai; Zhang, Zheye; Xiao, Junwu; Chen, Chen; Xiao, Fei; Wang, Shuai; Liu, Yunqi

    2013-01-01

    We report a facile and green method to synthesize a new type of catalyst by coating Pd nanoparticles (NPs) on reduced graphene oxide (rGO)-carbon nanotube (CNT) nanocomposite. An rGO-CNT nanocomposite with three-dimensional microstructures was obtained by hydrothermal treatment of an aqueous dispersion of graphene oxide (GO) and CNTs. After the rGO-CNT composites have been dipped in K₂PdCl₄ solution, the spontaneous redox reaction between the GO-CNT and PdCl₄(2-) led to the formation of nanohybrid materials consisting rGO-CNT decorated with 4 nm Pd NPs, which exhibited excellent and stable catalytic activity: the reduction of 4-nitrophenol to 4-aminophenol using NaBH4 as a catalyst was completed in only 20 s at room temperature, even when the Pd content of the catalyst was 1.12 wt%. This method does not require rigorous conditions or toxic agents and thus is a rapid, efficient, and green approach to the fabrication of highly active catalysts. PMID:23982312

  10. Neutron-activation analysis of several US Geological Survey and National Bureau of Standards reference materials

    SciTech Connect

    Daly, A.T.

    1981-01-01

    In this work, several US Geological Survey (U.S.G.S.) and National Bureau of Standards (N.B.S.) reference samples have been analyzed in an effort to improve the quality of elemental concentration data available on these materials, so they can be used in a program of verification of factor analysis source resolution procedures. The analyses of these samples were performed by instrumental neutron activation analysis (INAA). The samples analyzed were: U.S.G.S. Green River Shale, N.B.S. 45b Homogeneous River Sediment, U.S.G.S. Analyzed Peridotite N.B.S. 1579 Powdered Lead-based Paint, U.S.G.S. Hawaian Basalt U.S.G.S. Marine Mud, U.S.G.S. Analyzed Cody Shale U.S.G.S. Glass Mountain Rhyolite, N.B.S. Argillaceous Limestone No. 1, and a sample of Spex ultrapure graphite. Neutron activation analysis was employed because of the high sensitivity that can be attained in determining elemental concentrations. Although INAA is a relatively simple method and the reproducibility of the data is good, the method shows some inaccuracies. The basic theory and technique are reviewed in an attempt to show where problems can arise and how they can be dealt with.

  11. Effects of Cycling Conditions of Active Material From Discharged Ni Positive Plates Studied by Inelastic Neutron Scattering Spectroscopy

    NASA Technical Reports Server (NTRS)

    Eckert, Juergen; Varma, Ravi; Diebolt, Lisa; Reid, Margaret

    1998-01-01

    The objectives of this presentation are: identify atomic-level signatures of electrochemical activity of the active material on the Ni positive plates of Ni-H2 batteries, relate finding to cycling conditions and histories, and develop INS spectroscopy as a non-destructive testing technique for the evaluation of Ni-positive plates of Ni-H2 batteries.

  12. Provocative Opinion: Descriptive Chemistry.

    ERIC Educational Resources Information Center

    Bent, Henry A.; Bent, Brian E.

    1987-01-01

    Discusses many of the distinctions that chemists draw between theoretical chemistry and descriptive chemistry, along with the tendency for chemical educators to adopt the type of chemistry they feel is most important to teach. Uses examples to argue that theoretical chemistry and descriptive chemistry are, at the bottom line, the same. (TW)

  13. A Descriptive Experiment.

    ERIC Educational Resources Information Center

    Brand, Josef

    1979-01-01

    In this experiment in description, students in a high school honors English class were asked to select a surrealistic painting and capture it in writing. Their compositions were given to art students who tried to reproduce the paintings from the written descriptions. (SJL)

  14. Physics 3204. Course Description.

    ERIC Educational Resources Information Center

    Newfoundland and Labrador Dept. of Education.

    A description of the physics 3204 course in Newfoundland and Labrador is provided. The description includes: (1) statement of purpose, including general objectives of science education; (2) a list of six course objectives; (3) course content for units on sound, light, optical instruments, electrostatics, current electricity, Michael Faraday and…

  15. Job descriptions made easy.

    PubMed

    Miller, Larry

    2014-01-01

    The act of writing a job description can be a daunting and difficult task for many managers. This article focuses on the key concepts of What, How, and Measureable Results as they relate to an employee's job duties. When the answers to these three elements are articulated, they define the core responsibilities of any job that form the basis for an effective job description.

  16. Alignment of Synaptic Vesicle Macromolecules with the Macromolecules in Active Zone Material that Direct Vesicle Docking

    PubMed Central

    Xu, Jing; Jung, Jae Hoon; Marshall, Robert M.; McMahan, Uel J.

    2013-01-01

    Synaptic vesicles dock at active zones on the presynaptic plasma membrane of a neuron’s axon terminals as a precondition for fusing with the membrane and releasing their neurotransmitter to mediate synaptic impulse transmission. Typically, docked vesicles are next to aggregates of plasma membrane-bound macromolecules called active zone material (AZM). Electron tomography on tissue sections from fixed and stained axon terminals of active and resting frog neuromuscular junctions has led to the conclusion that undocked vesicles are directed to and held at the docking sites by the successive formation of stable connections between vesicle membrane proteins and proteins in different classes of AZM macromolecules. Using the same nanometer scale 3D imaging technology on appropriately stained frog neuromuscular junctions, we found that ∼10% of a vesicle’s luminal volume is occupied by a radial assembly of elongate macromolecules attached by narrow projections, nubs, to the vesicle membrane at ∼25 sites. The assembly’s chiral, bilateral shape is nearly the same vesicle to vesicle, and nubs, at their sites of connection to the vesicle membrane, are linked to macromolecules that span the membrane. For docked vesicles, the orientation of the assembly’s shape relative to the AZM and the presynaptic membrane is the same vesicle to vesicle, whereas for undocked vesicles it is not. The connection sites of most nubs on the membrane of docked vesicles are paired with the connection sites of the different classes of AZM macromolecules that regulate docking, and the membrane spanning macromolecules linked to these nubs are also attached to the AZM macromolecules. We conclude that the luminal assembly of macromolecules anchors in a particular arrangement vesicle membrane macromolecules, which contain the proteins that connect the vesicles to AZM macromolecules during docking. Undocked vesicles must move in a way that aligns this arrangement with the AZM macromolecules for

  17. Alignment of synaptic vesicle macromolecules with the macromolecules in active zone material that direct vesicle docking.

    PubMed

    Harlow, Mark L; Szule, Joseph A; Xu, Jing; Jung, Jae Hoon; Marshall, Robert M; McMahan, Uel J

    2013-01-01

    Synaptic vesicles dock at active zones on the presynaptic plasma membrane of a neuron's axon terminals as a precondition for fusing with the membrane and releasing their neurotransmitter to mediate synaptic impulse transmission. Typically, docked vesicles are next to aggregates of plasma membrane-bound macromolecules called active zone material (AZM). Electron tomography on tissue sections from fixed and stained axon terminals of active and resting frog neuromuscular junctions has led to the conclusion that undocked vesicles are directed to and held at the docking sites by the successive formation of stable connections between vesicle membrane proteins and proteins in different classes of AZM macromolecules. Using the same nanometer scale 3D imaging technology on appropriately stained frog neuromuscular junctions, we found that ∼10% of a vesicle's luminal volume is occupied by a radial assembly of elongate macromolecules attached by narrow projections, nubs, to the vesicle membrane at ∼25 sites. The assembly's chiral, bilateral shape is nearly the same vesicle to vesicle, and nubs, at their sites of connection to the vesicle membrane, are linked to macromolecules that span the membrane. For docked vesicles, the orientation of the assembly's shape relative to the AZM and the presynaptic membrane is the same vesicle to vesicle, whereas for undocked vesicles it is not. The connection sites of most nubs on the membrane of docked vesicles are paired with the connection sites of the different classes of AZM macromolecules that regulate docking, and the membrane spanning macromolecules linked to these nubs are also attached to the AZM macromolecules. We conclude that the luminal assembly of macromolecules anchors in a particular arrangement vesicle membrane macromolecules, which contain the proteins that connect the vesicles to AZM macromolecules during docking. Undocked vesicles must move in a way that aligns this arrangement with the AZM macromolecules for docking

  18. An Active Smart Material Control System for F/A-18 Buffet Alleviation

    NASA Technical Reports Server (NTRS)

    Sheta, Essam F.; Moses, Robert W.; Huttsell, Lawrence J.; Harrand, Vincent J.

    2003-01-01

    The vertical tail buffet problem of fighter aircraft occurs at high angles of attack when the vortical flow breaks down ahead of the vertical tails resulting in unsteady and unbalanced pressure loads on the vertical tails. The buffet loads imposed upon the vertical tails resulted in a premature fatigue failure of the tails, and consequently limits the performance and super maneuverability of twin-tail fighter aircraft. An active smart material control system using distributed piezoelectric actuators has been developed for buffet alleviation and is presented. The inboard and outboard surfaces of the vertical tail are equipped with piezoelectric actuators to control the buffet responses in the first bending and torsion modes. The electrodynamics of the piezoelectric actuators are expressed with a three-dimensional finite-element model. A single-input-single-output controller is designed to drive the active piezoelectric actuators. High-fidelity multidisciplinary analysis modules for the fluid dynamics, structure dynamics, electrodynamics of the piezoelectric actuators, control law, fluid structure interfacing, and grid motion are integrated into a multidisciplinary computing environment that controls the temporal synchronization of the analysis modules. At 30 degree angle of attack, RMS values of tip acceleration are reduced by as much as 12%. The peak values of the power spectral density of tail-tip acceleration are reduced by as much as 22% in the first bending mode and by as much as 82% in the first torsion mode. The actively controlled piezoelectric actuators were also effective in adding damping at wide range of angles of attack.

  19. Fabrication of a PANI/CPs composite material: a feasible method to enhance the photocatalytic activity of coordination polymers.

    PubMed

    Xu, Xin-Xin; Cui, Zhong-Ping; Qi, Ji; Liu, Xiao-Xia

    2013-03-21

    To improve the photocatalytic activity of a coordination polymer in the visible light region, polyaniline (PANI) was loaded onto its surface through a facile in situ chemical oxidation polymerization process. The resulting PANI loaded coordination polymer composite materials with excellent stability exhibit significantly higher photocatalytic activities than the pure coordination polymer photocatalyst on the degradation of methyl orange (MO) under visible light irradiation. This enhancement can be ascribed to the introduction of PANI on the surface of the coordination polymer, which leads to efficient separation of photogenerated electron-hole pairs as well as a significant expansion of the photoresponse region. Finally, we discussed the influence of acidity on the morphology and photocatalytic activity of the composite material. An optimal condition to obtain the PANI loaded coordination polymer composite material with excellent photocatalytic activity has been obtained.

  20. Sorption of mercury onto waste material derived low-cost activated carbon

    NASA Astrophysics Data System (ADS)

    Bhakta, Jatindra N.; Rana, Sukanta; Lahiri, Susmita; Munekage, Yukihiro

    2014-11-01

    The present study was performed to develop the low-cost activated carbon (AC) from some waste materials as potential mercury (Hg) sorbent to remove high amount of Hg from aqueous phase. The ACs were prepared from banana peel, orange peel, cotton fiber and paper wastes by pyrolysis and characterized by analyzing physico-chemical properties and Hg sorption capacity. The Brunauer Emmett and Teller surface areas (cotton 138 m2/g; paper 119 m2/g), micropore surface areas (cotton 65 m2/g; paper 54 m2/g) and major constituent carbon contents (cotton 95.04 %; paper 94.4 %) were higher in ACs of cotton fiber and paper wastes than the rest two ACs. The Hg sorption capacities and removal percentages were greater in cotton and paper wastes-derived ACs compared to those of the banana and orange peels. The results revealed that elevated Hg removal ability of cotton and paper wastes-derived ACs is largely regulated by their surface area, porosity and carbon content properties. Therefore, ACs of cotton and paper wastes were identified as potential sorbent among four developed ACs to remove high amount of Hg from aqueous phase. Furthermore, easily accessible precursor material, simple preparation process, favorable physico-chemical properties and high Hg sorption capacity indicated that cotton and paper wastes-derived ACs could be used as potential and low-cost sorbents of Hg for applying in practical field to control the severe effect of Hg contamination in the aquatic environment to avoid its human and environmental health risks.

  1. High-power, photofission-inducing bremsstrahlung source for intense pulsed active detection of fissile material

    NASA Astrophysics Data System (ADS)

    Zier, J. C.; Mosher, D.; Allen, R. J.; Commisso, R. J.; Cooperstein, G.; Hinshelwood, D. D.; Jackson, S. L.; Murphy, D. P.; Ottinger, P. F.; Richardson, A. S.; Schumer, J. W.; Swanekamp, S. B.; Weber, B. V.

    2014-06-01

    Intense pulsed active detection (IPAD) is a promising technique for detecting fissile material to prevent the proliferation of special nuclear materials. With IPAD, fissions are induced in a brief, intense radiation burst and the resulting gamma ray or neutron signals are acquired during a short period of elevated signal-to-noise ratio. The 8 MV, 200 kA Mercury pulsed-power generator at the Naval Research Laboratory coupled to a high-power vacuum diode produces an intense 30 ns bremsstrahlung beam to study this approach. The work presented here reports on Mercury experiments designed to maximize the photofission yield in a depleted-uranium (DU) object in the bremsstrahlung far field by varying the anode-cathode (AK) diode gap spacing and by adding an inner-diameter-reducing insert in the outer conductor wall. An extensive suite of diagnostics was fielded to measure the bremsstrahlung beam and DU fission yield as functions of diode geometry. Delayed fission neutrons from the DU proved to be a valuable diagnostic for measuring bremsstrahlung photons above 5 MeV. The measurements are in broad agreement with particle-in-cell and Monte Carlo simulations of electron dynamics and radiation transport. These show that with increasing AK gap, electron losses to the insert and outer conductor wall increase and that the electron angles impacting the bremsstrahlung converter approach normal incidence. The diode conditions for maximum fission yield occur when the gap is large enough to produce electron angles close to normal, yet small enough to limit electron losses.

  2. Integrating values in job descriptions.

    PubMed

    Craig, R P

    1987-12-01

    The Mission Services Division of the Sisters of Charity of the Incarnate Word Health Care Corporation, Houston, has established training sessions to help various facilities develop criteria-based job descriptions that integrate values. A major problem with traditional job descriptions is that they do not contain enough information for value integration to occur. Each facet of the job description--the responsibility statement, the task statement, and the standard--can integrate the facilities' values in explicit and implicit ways. Such integration reduces the possibility of a supervisor arbitrarily defining the qualitative aspects of how an employee performs the job and provides a better method for evaluating the quality of the employee's performance. The first step in value integration is to identify the organization's values. Next, illustrative behaviors are identified to emphasize value integration in both activity-based task statements and results-based standards. The final step is to integrate the values in the job description, which makes the value operational and bridges the gap between commitment to values and behavior that exemplifies those values. Although values cannot be measured as objectively as the successful accomplishment of a procedure with a specified method of measurement, evaluation of values is not fruitless. When the employee and supervisor agree on specific qualitative aspects of patient care or other tasks, the consistency of the qualitative aspects of the job can be evaluated.

  3. Descriptive Cataloging: A Selected, Annotated Bibliography, 1984-1985.

    ERIC Educational Resources Information Center

    Cook, C. Donald; Jones, Ellen

    1986-01-01

    This annotated bibliography of materials published during 1984-1985 on descriptive cataloging covers bibliographic control, Anglo American Cataloging Rules, 2nd edition (AACR2), specific types of materials, authority control, retrospective conversion, management issues, expert systems, and manuals. (EM)

  4. System design description PFP thermal stabilization

    SciTech Connect

    LARKIN, K.A.

    1999-02-23

    The purpose of this document is to provide a system design description and design basis for the Plutonium Finishing Plant (PFP) Thermal Stabilization project. The sources of material for this project are residues scraped from glovebox floors and materials already stored in vault storage that need further stabilizing. Stabilizing this material will promote long term storage and reduced worker exposure. This document addresses: functional design, equipment, and safety requirements for thermal stabilization of plutonium residues and oxides.

  5. Gamma/neutron time-correlation for special nuclear material detection – Active stimulation of highly enriched uranium

    SciTech Connect

    Paff, Marc G.; Monterial, Mateusz; Marleau, Peter; Kiff, Scott; Nowack, Aaron; Clarke, Shaun D.; Pozzi, Sara A.

    2014-06-21

    A series of simulations and experiments were undertaken to explore and evaluate the potential for a novel new technique for fissile material detection and characterization, the timecorrelated pulse-height (TCPH) method, to be used concurrent with active stimulation of potential nuclear materials. In previous work TCPH has been established as a highly sensitive method for the detection and characterization of configurations of fissile material containing Plutonium in passive measurements. By actively stimulating fission with the introduction of an external radiation source, we have shown that TCPH is also an effective method of detecting and characterizing configurations of fissile material containing Highly Enriched Uranium (HEU). The TCPH method is shown to be robust in the presence of the proper choice of external radiation source. An evaluation of potential interrogation sources is presented.

  6. Gamma/neutron time-correlation for special nuclear material detection – Active stimulation of highly enriched uranium

    DOE PAGES

    Paff, Marc G.; Monterial, Mateusz; Marleau, Peter; Kiff, Scott; Nowack, Aaron; Clarke, Shaun D.; Pozzi, Sara A.

    2014-06-21

    A series of simulations and experiments were undertaken to explore and evaluate the potential for a novel new technique for fissile material detection and characterization, the timecorrelated pulse-height (TCPH) method, to be used concurrent with active stimulation of potential nuclear materials. In previous work TCPH has been established as a highly sensitive method for the detection and characterization of configurations of fissile material containing Plutonium in passive measurements. By actively stimulating fission with the introduction of an external radiation source, we have shown that TCPH is also an effective method of detecting and characterizing configurations of fissile material containing Highlymore » Enriched Uranium (HEU). The TCPH method is shown to be robust in the presence of the proper choice of external radiation source. An evaluation of potential interrogation sources is presented.« less

  7. Microbial and Mineral Descriptions of the Interior Habitable Zones of Active Hydrothermal Chimneys from the Endeavour Segment, Juan de Fuca Ridge

    NASA Astrophysics Data System (ADS)

    Holden, J. F.; Lin, T.; Ver Eecke, H. C.; Breves, E.; Dyar, M. D.; Jamieson, J. W.; Hannington, M. D.; Butterfield, D. A.; Bishop, J. L.; Lane, M. D.

    2013-12-01

    hyperthermophilic iron reducers in this sample were 1,740 and 10 cells/gram (dry weight) of material from scrapings of the outer surface and the soft, marcasite-sphalerite-rich interior region, respectively. Two hyperthermophilic iron reducers, Hyperthermus sp. Ro04 and Pyrodictium sp. Su06, were isolated from other active hydrothermal chimneys on the Endeavour Segment. Strain Ro04 is a neutrophilic (pHopt 7-8) heterotroph while strain Su06 is a mildly acidophilic (pHopt 5), hydrogenotrophic autotroph. Mössbauer spectroscopy of the iron oxides before and after growth demonstrated that both organisms form nanophase (<12 nm) magnetite [Fe3O4] from ferrihydrite [Fe(OH)3] with no detectable mineral intermediates. Both organisms grew optimally at 90-92°C with growth yields of 0.5-5×1012 cells/mol Fe2+ and Fe2+ production rates between 0.03-0.54 pmol Fe2+/cell/h. They produced up to 40 mM Fe2+ in a growth-dependent manner while all abiotic controls produced < 3 mM Fe2+. Electron micrographs show that the cells form aggregates with iron oxide particles during growth. Hyperthermophilic iron reducers may be common in mildly reducing, iron-rich hydrothermal systems where iron oxides are formed at hyperthermophile growth temperatures.

  8. Oxygen reduction and evolution at single-metal active sites: Comparison between functionalized graphitic materials and protoporphyrins

    NASA Astrophysics Data System (ADS)

    Calle-Vallejo, F.; Martínez, J. I.; García-Lastra, J. M.; Abad, E.; Koper, M. T. M.

    2013-01-01

    A worldwide spread of clean technologies such as low-temperature fuel cells and electrolyzers depends strictly on their technical reliability and economic affordability. Currently, both conditions are hardly fulfilled mainly due to the same reason: the oxygen electrode, which has large overpotentials and is made of precious materials. A possible solution is the use of non-noble electrocatalysts with single-metal active sites. Here, on the basis of DFT calculations of adsorbed intermediates and a thermodynamic analysis, we compare the oxygen reduction (ORR) and evolution (OER) activities of functionalized graphitic materials and gas-phase porphyrins with late transition metals. We find that both kinds of materials follow approximately the same activity trends, and active sites with transition metals from groups 7 to 9 may be good ORR and OER electrocatalysts. However, spin analyses show more flexibility in the possible oxidation states of the metal atoms in solid electrocatalysts, while in porphyrins they must be + 2. These observations reveal that the catalytic activity of these materials is mainly due to nearest-neighbor interactions. Based on this, we propose that this class of electrocatalysts may be improved by careful selections of the support and the ligand properties close to the active sites and/or the ramifications near them, so that charge is transferred back and forth during adsorption and selective hydrogen bonds are formed.

  9. IFMIF, International Fusion Materials Irradiation Facility conceptual design activity cost report

    SciTech Connect

    Rennich, M.J.

    1996-12-01

    This report documents the cost estimate for the International Fusion Materials Irradiation Facility (IFMIF) at the completion of the Conceptual Design Activity (CDA). The estimate corresponds to the design documented in the Final IFMIF CDA Report. In order to effectively involve all the collaborating parties in the development of the estimate, a preparatory meeting was held at Oak Ridge National Laboratory in March 1996 to jointly establish guidelines to insure that the estimate was uniformly prepared while still permitting each country to use customary costing techniques. These guidelines are described in Section 4. A preliminary cost estimate was issued in July 1996 based on the results of the Second Design Integration Meeting, May 20--27, 1996 at JAERI, Tokai, Japan. This document served as the basis for the final costing and review efforts culminating in a final review during the Third IFMIF Design Integration Meeting, October 14--25, 1996, ENEA, Frascati, Italy. The present estimate is a baseline cost estimate which does not apply to a specific site. A revised cost estimate will be prepared following the assignment of both the site and all the facility responsibilities.

  10. Active Inspection of Nuclear Materials Using {sup 4}He Scintillation Detectors

    SciTech Connect

    Davatz, G.; Howard, A.; Chandra, R.; Gendotti, U.

    2011-12-13

    The detection of fissionable materials by neutron and high-energy photon active interrogation methods is explored using {sup 4}He scintillation detectors to search for prompt and delayed neutron signature. The low electron density of {sup 4}He in addition to its pulse shape discrimination capability allows strong rejection of gamma radiation. For the detection of the prompt neutron signatures, this capability is important as the signal produced by induced fission is accompanied by intense gamma radiation. The nanosecond time resolution of {sup 4}He scintillation detectors can be used for time-of-flight measurements aimed at determining the energy of the emitted neutrons. For delayed neutron detection, the insensitivity to the low energy neutrons present from non-signal reactions is inherent. Unlike detectors requiring a moderator, this technology can easily be collimated to reduce sensitivity to neutrons from outside the field of interest. The performance of the detectors for these applications is studied using GEANT4 computer modeling, based on measured detector parameters. A comparison is made with technologies typically used for these applications, i.e. heavily shielded organic scintillators for prompt neutron detection and Cd-lined {sup 3}He neutron detectors for the detection of delayed neutrons.

  11. Electrospun conducting polymer nanofibers as the active material in sensors and diodes

    NASA Astrophysics Data System (ADS)

    Pinto, Nicholas J.

    2013-03-01

    Polyaniline doped with camphorsulfonic acid (PANi-HCSA) and poly(3,4-ethylenedioxythiophene) doped with polystyrene sulfonic acid (PEDOT-PSSA) were electrospun separately to obtain individual nanofibers which were captured on Si/SiO2 substrates and electrically characterized. The fiber resistance was recorded as a function of time in the presence of vapours of aliphatic alcohols of varying sizes. Due to the large surface to volume ratio, uniform diameter and small quantity of active material used in the construction, these sensor responses are very quick. Sensors made from individual fibers also show true saturation upon exposure to and removal of the sensing gas. A Schottky diode was also fabricated using an n-doped Si/SiO2 substrate and a single PANi-HCSA fiber and tested in vacuum and in ammonia gas. The diode response was instantaneous upon exposure to ammonia with nearly complete recovery of the current upon pumping out the ammonia, thereby making it a reusable sensor with rectifying behaviour i.e. multifunctional.

  12. Fouling-release and chemical activity effects of a siloxane-based material on tunicates.

    PubMed

    Filip, Natalia; Pustam, Amanda; Ells, Veronica; Grosicki, Kathleen M T; Yang, Jin; Oguejiofor, Ikenna; Bishop, Cory D; DeMont, M Edwin; Smith-Palmer, Truis; Wyeth, Russell C

    2016-05-01

    The antifouling performance of a siloxane-based elastomeric impression material (EIM) was compared to that of two silicone fouling-release coatings, Intersleek 757 and RTV-11. In field immersion trials, the EIM caused the greatest reduction in fouling by the solitary tunicate Ciona intestinalis and caused the longest delay in the progression of fouling by two species of colonial tunicate. However, in pseudobarnacle adhesion tests, the EIM had higher attachment strengths. Further laboratory analyses showed that the EIM leached alkylphenol ethoxylates (APEs) that were toxic to C. intestinalis larvae. The EIM thus showed the longest duration of chemical activity measured to date for a siloxane-based coating (4 months), supporting investigations of fouling-release coatings that release targeted biocides. However, due to potential widespread effects of APEs, the current EIM formulation should not be considered as an environmentally-safe antifoulant. Thus, the data also emphasize consideration of both immediate and long-term effects of potentially toxic constituents released from fouling-release coatings. PMID:26986763

  13. The importance of the active surface area of graphite materials in the first lithium intercalation

    NASA Astrophysics Data System (ADS)

    Novák, P.; Ufheil, J.; Buqa, H.; Krumeich, F.; Spahr, M. E.; Goers, D.; Wilhelm, H.; Dentzer, J.; Gadiou, R.; Vix-Guterl, C.

    When lithium is intercalated into graphite in ethylene carbonate (EC) containing electrolytes, solvent co-intercalation leading to the exfoliation of the graphite structure could occur. The exfoliation can be suppressed if an efficient solid electrolyte interphase (SEI, a passivation layer) is formed. Here we study the role played by the active surface area (ASA) of graphite materials during their first electrochemical reduction. ASA (related to the presence of defects at the carbon surface) appears as a critical graphite surface parameter influencing the surface passivation mechanism and the graphite exfoliation. The ASA of TIMREX ® SLX50 synthetic graphite was modified by thermal treatment in argon and air. The electrochemical performance was characterized in 1 M LiPF 6, EC:DMC electrolyte and post mortem analyses were performed by SEM imaging. It turned out that a decrease of the graphite ASA, i.e., an increase of the graphite structural order, hinders the formation of the passivation layer and favors the exfoliation process. In contrast, the exfoliation of the same graphite can be suppressed if its ASA is increased for example by air treatment. The ASA of the graphite kinetically controls the formation of an efficient SEI film and accordingly the irreversible charge loss is much lower in the case of graphite with a high ASA value.

  14. Integration of electronics and photonics in active material by femtosecond laser for functional microdevice fabrication

    NASA Astrophysics Data System (ADS)

    Cheng, Ya; Xu, Zhizhan; Sugioka, Koji; Midorikawa, Katsumi

    2010-02-01

    Recently, hybrid integration of multifunctional micro-components for creating complex, intelligent micro/nano systems has attracted significant attention. These micro/nano systems have important applications in a variety of areas, such as healthcare, environment, communication, national security, and so on. Until now, fabrication of micro/nano systems incorporated with different functions is still a challenging issue, which generally requires fabrication of microcomponents beforehand followed by assembly and packaging procedures. Thus, the fabrication process is complex and costly. In recent years, the rapid development of femtosecond laser microfabrication technology has enabled direct fabrication and integration of multifunctional components, such as microfluidics, microoptics, micromechanics, microelectronics, etc., into a substrate. Particularly, in this talk, we show the use of femtosecond laser microfabrication for integrating microelectronics and microphotonics. Both microelectrodes and optical waveguides can be directly embedded in active materials after a femtosecond laser direct writing followed by electroless chemical plating. As examples, electric-optic (EO) modulators were fabricated in lithium niobate (LiNbO3) crystal and their functions were demonstrated.

  15. Determination of multielements in a typical Japanese diet certified reference material by instrumental neutron activation analysis.

    PubMed

    Suzuki, Shogo; Okada, Yukiko; Hirai, Shoji

    2003-08-01

    Multielements in a typical Japanese diet certified reference material prepared at the National Institute for Environmental Studies (NIES) of Japan, in collaboration with the National Institute of Radiological Sciences (NIRS) of Japan were determined by instrumental neutron activation analysis (INAA). Five samples (ca. 510-1000 mg) and comparative standards were irradiated for a short time (10 s) at a thermal neutron flux of 1.5 x 10(12) n cm(-2) s(-1) (pneumatic transfer) and for a long time (6 h) at a thermal neutron flux of 3.7 x 10(12) n cm(-2) s(-1) (central thimble) in the Rikkyo University Research Reactor (TRIGA Mark-II, 100 kW). The irradiated samples were measured by conventional gama-ray spectrometry using a coaxial Ge detector, and by anti-coincidence and coincidence gamma-ray spectrometry with a coaxial Ge detector and a well-type NaI(Tl) detector. The concentrations of 38 elements were determined by these methods. PMID:12945682

  16. Study of multi-layer active magnetic regenerators using magnetocaloric materials with first and second order phase transition

    NASA Astrophysics Data System (ADS)

    Lei, T.; Engelbrecht, K.; Nielsen, K. K.; Neves Bez, H.; Bahl, C. R. H.

    2016-09-01

    Magnetocaloric materials (MCM) with a first order phase transition (FOPT) usually exhibit a large, although sharp, isothermal entropy change near their Curie temperature, compared to materials with a second order phase transition (SOPT). Experimental results of applying FOPT materials in recent magnetocaloric refrigerators (MCR) demonstrated the great potential for these materials, but a thorough study on the impact of the moderate adiabatic temperature change and strong temperature dependence of the magnetocaloric effect (MCE) is lacking. Besides, comparing active magnetic regenerators (AMR) using FOPT and SOPT materials is also of fundamental interest. We present modeling results of multi-layer AMRs using FOPT and SOPT materials based on a 1D numerical model. First the impact of isothermal entropy change, adiabatic temperature change and shape factor describing the temperature dependence of the MCE are quantified and analyzed by using artificially built magnetocaloric properties. Then, based on measured magnetocaloric properties of La(Fe,Mn,Si)13H y and Gd, an investigation on how to layer typical FOPT and SOPT materials with different temperature spans is carried out. Moreover, the sensitivity of variation in Curie temperature distribution for both groups of AMRs is investigated. Finally, a concept of mixing FOPT and SOPT materials is studied for improving the stability of layered AMRs with existing materials.

  17. Introducing the potential of antimicrobial materials for human and robotic spaceflight activities

    NASA Astrophysics Data System (ADS)

    Hahn, Claudia; Reitz, Guenther; Moeller, Ralf; Rettberg, Petra; Hans, Michael; Muecklich, Frank

    their relative short reaction time, long efficiency and functionality, broad application to reduce (micro-)biological contamination, high inactivation rates, sustainability, and avoidance of microbial resistance. Methods like contact killing measurement are one of the reliable ways to examine the effect of metal surfaces on the inactivation of microorganisms. We conducted contact killing experiments, in which we exposed human-associated microorganisms like Escherichia coli and Staphylococcus sp. on copper and stainless steel to detect and evaluate the potential incorporation of those materials in future spacecraft components. In contrast to an exposure on stainless steel microorganisms exposed on copper died within a few hours and therefore do not have the ability to proliferate, build protecting biofilms or even survive. The application of different surfaces and antimicrobial substances such as copper and silver, as well as testing other model organisms are still under examination. The results of our experiments are also very promising to other research areas, e.g., clinical application. Here, we would like to present our first data and ideas on the utilization of antimicrobial metal-based surfaces for human and robotic spaceflight activities as a beneficial method to reduce microbial contamination. \\underline{References} Horneck G et al. (2010) Space microbiology. Microbiol. Mol. Biol. Rev. 74:121-156. Vaishampayan P et al. (2013) New perspectives on viable microbial communities in low-biomass cleanroom environments. ISME J. 7:312-324. van Houdt R et al. (2012) Microbial contamination monitoring and control during human space missions. Planet. Space Sci. 60:115-120.

  18. Surface activity and film formation from the surface associated material of artificial surfactant preparations.

    PubMed

    Palmblad, M; Gustafsson, M; Curstedt, T; Johansson, J; Schürch, S

    2001-02-01

    Surfactant proteins B and C (SP-B and SP-C) are present in natural derived surfactant preparations used for treatment of respiratory distress syndrome. Herein the surface activity of an SP-C analogue (SP-C(LKS)), a hybrid peptide between SP-C and bacteriorhodopsin (SP-C/BR) and a model peptide (KL(4)) was studied with a captive bubble surfactometer (CBS). The peptides were mixed with either 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC)/phosphatidylglycerol (PG) (7:3, by weight) or DPPC/PG/palmitic acid (68:22:9, by weight) at a concentration of 1 mg/ml in HEPES buffer, pH 6.9 and a polypeptide/lipid weight ratio of 0.02--0.03. In some lipid/peptide preparations also 2% of SP-B was included. Adsorption, monitored as surface tension vs. time for 10 min after bubble formation did not show discernible differences for the whole set of preparations. Equilibrium surface tensions of approximately 25 mN/m were reached after 5--10 min for all preparations, although those with SP-C/BR appeared not to reach end point of adsorption within 10 min. Area compression needed to reach minimum surface tension of 0.5--2.0 mN/m was least for the KL(4) preparation, about 13% in the first cycle. 3% SP-C(LKS) in DPPC:PG (7:3, by weight) reached minimum surface tension upon 27% compression in the first cycle. If DPPC:PG:PA (68:22:9, by weight) was used instead only 16% area compression was needed and 14% if also 2% SP-B was included. 3% SP-C(LKS) in DPPC:PG (7:3, by weight)+2% SP-B needed 34% compression to reach minimum surface tension. The replenishment of material from a surface associated surfactant reservoir was estimated with subphase depletion experiments. With the 2% KL(4) preparation incorporation of excess material took place at a surface tension of 25--35 mN/m during stepwise bubble expansion and excess material equivalent to 4.3 monolayers was found. When 2% SP-B was added to 3% SP-C(LKS) in DPPC:PG (7:3, by weight) the number of excess monolayers increased from 1.5 to 3

  19. Classroom Activities and Demonstrations for Use in Behavioral Science Courses.

    ERIC Educational Resources Information Center

    Cology, Lorry J.

    This compilation provides descriptions of and resource materials for 25 classroom activities or demonstrations for behavioral science courses. For each activity, the following information is provided: subject area, source, time required and materials needed. In addition, discussion questions and comments on the value and use of the activities are…

  20. Nondestructive activation analysis of sample of lunar surface material returned by Luna 16 automatic station. [chemical composition

    NASA Technical Reports Server (NTRS)

    Chayko, M.; Sabo, E.

    1974-01-01

    The composition of a sample of lunar surface material returned by the Luna 16 automatic station from the Sea of Fertility was studied, using nondestructive activation analysis. The structure of the returned surface material is inhomogeneous; the surficial material is thin, quite homogeneous, and the granularity increases with depth. Based on grain size, the sample was separated into five zones. The activation analysis was conducted on a sample taken from the friable surficial layer, zone A. The content of Al, Mn, Na, Cr, Co, Fe, and Sc was determined by nondestructive activation analysis of the sample. In determining Cr, Co, Fe, and Sc, the sample was irradiated for 24 hours and cooled for 10 days. Gamma spectra of the samples were recorded with a semiconductor Ge(Li)-detector and a multichannel analyzer, and measurement data were processed with an electronic computer.