Science.gov

Sample records for activity packets laps

  1. Cashier/Checker Learning Activity Packets (LAPs).

    ERIC Educational Resources Information Center

    Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

    Twenty-four learning activity packets (LAPs) are provided for six areas of instruction in a cashier/checker program. Section A, Orientation, contains an LAP on exploring the job of cashier-checker. Section B, Operations, has nine LAPs, including those on operating the cash register, issuing trading stamps, and completing the cash register balance…

  2. Auto Mechanics I. Learning Activity Packets (LAPs). Section C--Engine.

    ERIC Educational Resources Information Center

    Oklahoma State Board of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

    This document contains five learning activity packets (LAPs) that outline the study activities for the "engine" instructional area for an Auto Mechanics I course. The five LAPs cover the following topics: basic engine principles, cooling system, engine lubrication system, exhaust system, and fuel system. Each LAP contains a cover sheet that…

  3. Auto Mechanics I. Learning Activity Packets (LAPs). Section A--Orientation and Safety.

    ERIC Educational Resources Information Center

    Oklahoma State Board of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

    This document contains seven learning activity packets (LAPs) that outline the study activities for the orientation and safety instructional area for an Auto Mechanics I course. The seven LAPs cover the following topics: orientation, safety, hand tools, arc welding, oxyacetylene cutting, oxyacetylene fusion welding, and oxyacetylene braze welding.…

  4. Oral Hygiene. Instructor's Packet. Learning Activity Package.

    ERIC Educational Resources Information Center

    Hime, Kirsten

    This instructor's packet accompanies the learning activity package (LAP) on oral hygiene. Contents included in the packet are a time sheet, suggested uses for the LAP, an instruction sheet, final LAP reviews, a final LAP review answer key, suggested activities, additional resources (student handouts), student performance checklists for both…

  5. Grooming. Instructor's Packet. Learning Activity Package.

    ERIC Educational Resources Information Center

    Stark, Pamela

    This instructor's packet accompanies the learning activity package (LAP) on grooming. Contents included in the packet are a time sheet, suggested uses for the LAP, an instruction sheet, final LAP reviews, a final LAP review answer key, suggested activities, an additional resources list, and student completion cards to issue to students as an…

  6. Handwashing Technique. Instructor's Packet. Learning Activity Package.

    ERIC Educational Resources Information Center

    Stark, Pamela

    This instructor's packet accompanies the learning activity package (LAP) on handwashing. Contents included in the packet are a time sheet, suggested uses for the LAP, an instruction sheet, final LAP reviews, a final LAP review answer key, a student performance checklist, an additional resources list, and student completion cards to issue to…

  7. Business Education: Learning Activities Packet for Office Education.

    ERIC Educational Resources Information Center

    Hawaii State Dept. of Education, Honolulu. Office of Instructional Services.

    These seventeen individualized learning activities packets (LAPs) are intended to relate essential competencies needed for entry or advancement in office occupations to the secondary level office education program and to assist students in achieving occupational proficiency in business careers. Each LAP contains some or all of the following…

  8. Learning Activity Packets for Milling Machines. Unit III--Vertical Milling Machines.

    ERIC Educational Resources Information Center

    Oklahoma State Board of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

    This learning activity packet (LAP) outlines the study activities and performance tasks covered in a related curriculum guide on milling machines. The course of study in this LAP is intended to help students learn to set up and operate a vertical mill. Tasks addressed in the LAP include mounting and removing cutters and cutter holders for vertical…

  9. Learning Activity Packets for Milling Machines. Unit II--Horizontal Milling Machines.

    ERIC Educational Resources Information Center

    Oklahoma State Board of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

    This learning activity packet (LAP) outlines the study activities and performance tasks covered in a related curriculum guide on milling machines. The course of study in this LAP is intended to help students learn to set up and operate a horizontal mill. Tasks addressed in the LAP include mounting style "A" or "B" arbors and adjusting arbor…

  10. Canada and the United States. Perspective. Learning Activity Packet.

    ERIC Educational Resources Information Center

    Maine Univ., Orono. New England - Atlantic Provinces - Quebec Center.

    The similarities and differences of Canada and the United States are explored in this Learning Activity Packet (LAP). Ten learning objectives are given which encourage students to examine: 1) the misconceptions Americans and Canadians have about each other and their ways of life; 2) the effect and influence of French and English exploration and…

  11. Learning Activity Packets for Auto Mechanics II. Section A--Engine Rebuilding.

    ERIC Educational Resources Information Center

    Oklahoma State Board of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

    Eight learning activity packets (LAPs) are provided for the instructional area of engine rebuilding in the auto mechanics II program. They accompany an instructor's guide available separately. The LAPs outline the study activities and performance tasks for these eight units: (1) engine condition evaluation; (2) engine removal; (3) engine…

  12. Learning Activity Packets for Auto Mechanics II. Section C--Drive Train.

    ERIC Educational Resources Information Center

    Oklahoma State Board of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

    Five learning activity packets (LAPs) are provided for the instructional area of drive train in the auto mechanics II program. They accompany an instructor's guide available separately. The LAPs outline the study activities and performance tasks for these five units: (1) clutch assembly, (2) standard transmission, (3) drive lines, (4) rear axle,…

  13. Learning Activity Packets for Milling Machines. Unit I--Introduction to Milling Machines.

    ERIC Educational Resources Information Center

    Oklahoma State Board of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

    This learning activity packet (LAP) outlines the study activities and performance tasks covered in a related curriculum guide on milling machines. The course of study in this LAP is intended to help students learn to identify parts and attachments of vertical and horizontal milling machines, identify work-holding devices, state safety rules, and…

  14. New design deforming controlling system of the active stressed lap

    NASA Astrophysics Data System (ADS)

    Ying, Li; Wang, Daxing

    2008-07-01

    A 450mm diameter active stressed lap has been developed in NIAOT by 2003. We design a new lap in 2007. This paper puts on emphases on introducing the new deforming control system of the lap. Aiming at the control characteristic of the lap, a new kind of digital deforming controller is designed. The controller consists of 3 parts: computer signal disposing, motor driving and force sensor signal disposing. Intelligent numeral PID method is applied in the controller instead of traditional PID. In the end, the result of new deformation are given.

  15. Learning Activity Package, Chemistry I, (LAP) Study 29.

    ERIC Educational Resources Information Center

    Jones, Naomi

    Presented is a Learning Activity Package (LAP) study concerned with carbon and its compounds. This LAP in chemistry includes a rationale for studying the chemical element of carbon, a list of student objectives (stated in behavioral terms), of activities (reading, laboratory experiments, model construction, etc.), a two-page worksheet, a…

  16. Experimental dynamic deformation analysis of active stressed lap.

    PubMed

    Zhao, Hongshen; Li, Xiaojin; Fan, Bin; Zeng, Zhige

    2016-02-20

    We introduce a method to measure the dynamic surface deformation of an active stressed lap for fabricating a 4  mf/1.5  mirror. Lap surface accuracy working in some typical deformation velocities is put forward. Experimental results indicate that dynamic lap surface accuracy is worse than that of a static surface, and dynamic surface accuracy gets worse if deformation velocity increases, while the difference of lap surface error RMS is less than 1 μm. An optimization of the processing strategy is feasible through changing the deformation velocity of the active stressed lap depending on the processing schedule. After optimizing the grinding and polishing strategy, efficiency is expected to have a significant increase. PMID:26906568

  17. How lamina-associated polypeptide 1 (LAP1) activates Torsin

    PubMed Central

    Sosa, Brian A; Demircioglu, F Esra; Chen, James Z; Ingram, Jessica; Ploegh, Hidde L; Schwartz, Thomas U

    2014-01-01

    Lamina-associated polypeptide 1 (LAP1) resides at the nuclear envelope and interacts with Torsins, poorly understood endoplasmic reticulum (ER)-localized AAA+ ATPases, through a conserved, perinuclear domain. We determined the crystal structure of the perinuclear domain of human LAP1. LAP1 possesses an atypical AAA+ fold. While LAP1 lacks canonical nucleotide binding motifs, its strictly conserved arginine 563 is positioned exactly where the arginine finger of canonical AAA+ ATPases is found. Based on modeling and electron microscopic analysis, we propose that LAP1 targets Torsin to the nuclear envelope by forming an alternating, heterohexameric (LAP1-Torsin)3 ring, in which LAP1 acts as the Torsin activator. The experimental data show that mutation of arginine 563 in LAP1 reduces its ability to stimulate TorsinA ATPase hydrolysis. This knowledge may help scientists understand the etiology of DYT1 primary dystonia, a movement disorder caused by a single glutamate deletion in TorsinA. DOI: http://dx.doi.org/10.7554/eLife.03239.001 PMID:25149450

  18. Learning Activity Packets for Grinding Machines. Unit II--Surface Grinding.

    ERIC Educational Resources Information Center

    Oklahoma State Board of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

    This learning activity packet (LAP) is one of three that accompany the curriculum guide on grinding machines. It outlines the study activities and performance tasks for the second unit of this curriculum guide. Its purpose is to aid the student in attaining a working knowledge of this area of training and in achieving a skilled or moderately…

  19. Learning Activity Packets for Grinding Machines. Unit I--Grinding Machines.

    ERIC Educational Resources Information Center

    Oklahoma State Board of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

    This learning activity packet (LAP) is one of three that accompany the curriculum guide on grinding machines. It outlines the study activities and performance tasks for the first unit of this curriculum guide. Its purpose is to aid the student in attaining a working knowledge of this area of training and in achieving a skilled or moderately…

  20. French-Canadians, Acadians and the French in New England. A Learning Activity Packet.

    ERIC Educational Resources Information Center

    Maine Univ., Orono. New England - Atlantic Provinces - Quebec Center.

    The history of the French-Canadians from their beginnings to the present time is the topic of this Learning Activity Packet (LAP). Designed to acquaint students with the French, Canada's earliest permanent settlers following the Indians, the unit is divided into six objectives which include learning activities for each. Students are expected to…

  1. The Atlantic Canada-New England Region and Environment. A Learning Activity Packet.

    ERIC Educational Resources Information Center

    Maine Univ., Orono. New England - Atlantic Provinces - Quebec Center.

    In this Learning Activity Packet (LAP) students examine the geographic and ecological bases of the Eastern international region. The overall objective of activities is to help students comprehend the man-earth relationship concept. By studying this familiar relevant region students gain geographic knowledge and skills applicable to other areas.…

  2. Curriculum Development of Learning Activity Packets, Dental Assisting Program. Final Report.

    ERIC Educational Resources Information Center

    Hempler, Nancy A.

    A dental assisting instructor was provided with 250 hours of released time to develop standardized Learning Activity Packets (LAPs) for the Dental Assisting program at the Bellingham (Washington) Vocational Technical Institute. The instructor reviewed unit objectives, gathered input from local dental professionals, reviewed reference materials,…

  3. Learning Activity Package, Physical Science 92, LAPs 1-9.

    ERIC Educational Resources Information Center

    Williams, G. J.

    This set of nine teacher-prepared Learning Activity Packages (LAPs) for individualized instruction in physical science covers the topics of scientific equipment and procedures; measure of time, length, area, and volume; water; oxygen and oxidation; atmospheric pressure; motion; machines; carbon; and light and sound. Each unit contains a rationale…

  4. Learning Activity Package, Algebra 124, LAPs 46-55.

    ERIC Educational Resources Information Center

    Holland, Bill

    A series of 10 teacher-prepared Learning Activity Packages (LAPs) in advanced algebra and trigonometry, these units cover absolute value, inequalities, exponents, radicals, and complex numbers; functions; higher degree equations and the derivative; the trigonometric functions; graphs and applications of the trigonometric functions; sequences and…

  5. Solid Waste Activity Packet for Teachers.

    ERIC Educational Resources Information Center

    Illinois Univ., Urbana. Cooperative Extension Service.

    This solid waste activity packet introduces students to the solid waste problem in Illinois. Topics explore consumer practices in the market place, packaging, individual and community garbage generation, and disposal practices. The activities provide an integrated approach to incorporating solid waste management issues into subject areas. The…

  6. The Air We Breathe. Activity Packet.

    ERIC Educational Resources Information Center

    Connecticut State Dept. of Environmental Protection, Hartford.

    This packet of materials is intended to provide teachers with an interdisciplinary approach to integrating air quality education into the existing curriculum of Connecticut schools. The unit is designed to complement the student booklet "The Air We Breathe," which is included. A major portion of the document is comprised of teaching activities.…

  7. Social Security. Cooperative Work Experience Learning Activity Packet: Series on Job Entry and Adjustment; Packet Six.

    ERIC Educational Resources Information Center

    Herschbach, Dennis R.; And Others

    This student booklet is sixth in an illustrated series of eleven learning activity packets for use in teaching job hunting and application procedures and the management of wages to secondary students. Four units are included in this packet to explain (1) the different benefits social security provides and the principles behind the program; (2) the…

  8. Nature's Hitchhikers. A Fall Activity Packet for Second Grade.

    ERIC Educational Resources Information Center

    Jackson Community Coll., MI. Dahlem Environmental Education Center.

    This instructional packet is one of 14 school environmental education programs developed for use in the classroom and at the Dahlem Environmental Education Center (DEEC) of the Jackson Community College (Michigan). Provided in the packet are pre-trip activities, field trip activities, and post-trip activities which focus on the characteristics of…

  9. Spring Birds. A Spring Activity Packet for First Grade.

    ERIC Educational Resources Information Center

    Jackson Community Coll., MI. Dahlem Environmental Education Center.

    This instructional packet is one of 14 school environmental education programs developed for use in the classroom and at the Dahlem Environmental Education Center (DEEC) of the Jackson Community College (Michigan). Provided in the packet are pre-trip activities, field trip activities, and post-trip activities which focus on the characteristics of…

  10. Reading the Rocks. A Fall Activity Packet for Fifth Grade.

    ERIC Educational Resources Information Center

    Jackson Community Coll., MI. Dahlem Environmental Education Center.

    This instructional packet is one of 14 school environmental education programs developed for use in the classroom and at the Dahlem Environmental Education Center (DEEC) of the Jackson Community College (Michigan). Provided in the packet are pre-trip activities, field trip activities, and post-trip activities which focus on various geological…

  11. Frogs and Toads. A Spring Activity Packet for Second Grade.

    ERIC Educational Resources Information Center

    Jackson Community Coll., MI. Dahlem Environmental Education Center.

    This instructional packet is one of 14 school environmental education programs developed for use in the classroom and at the Dahlem Environmental Education Center (DEEC) of the Jackson Community College (Michigan). Provided in the packet are pre-trip activities, field trip activities, and post-trip activities which focus on the characteristics and…

  12. Forests and Flowers. A Spring Activity Packet for Third Grade.

    ERIC Educational Resources Information Center

    Jackson Community Coll., MI. Dahlem Environmental Education Center.

    This instructional packet is one of 14 school environmental education programs developed for use in the classroom and at the Dahlem Environmental Education Center (DEEC) of the Jackson Community College (Michigan). Provided in the packet are pre-trip activities, field trip activities, and post-trip activities which focus on plants and…

  13. Nature Prepares for Winter. A Fall Activity Packet for Kindergarten.

    ERIC Educational Resources Information Center

    Jackson Community Coll., MI. Dahlem Environmental Education Center.

    This instructional packet is one of 14 school environmental education programs developed for use in the classroom and at the Dahlem Environmental Education Center (DEEC) of the Jackson Community College (Michigan). Provided in the packet are pre-trip activities, field trip activities, and post-trip activities which focus on preparations for winter…

  14. Energy Around Us. A Fall Activity Packet for Fourth Grade.

    ERIC Educational Resources Information Center

    Jackson Community Coll., MI. Dahlem Environmental Education Center.

    This instructional packet is one of 14 school environmental education programs developed for use in the classroom and at the Dahlem Environmental Education Center (DEEC) of the Jackson Community College (Michigan). Provided in the packet are pre-trip activities, field trip activities, and post-trip activities which focus on energy uses, energy…

  15. Michigan Natural History. A Spring Activity Packet for Fourth Grade.

    ERIC Educational Resources Information Center

    Jackson Community Coll., MI. Dahlem Environmental Education Center.

    This instructional packet is one of 14 school environmental education programs developed for use in the classroom and at the Dahlem Environmental Education Center (DEEC) of the Jackson Community College (Michigan). Provided in the packet are pre-trip activities, field trip activities, and post-trip activities which focus on the natural history of…

  16. Deformation verification and surface improvement of active stressed lap for 4  m-class primary mirror fabrication.

    PubMed

    Zhao, Hongshen; Li, Xiaojin; Fan, Bin; Zeng, Zhige

    2015-04-01

    The surface shape accuracy of the active stressed lap impacts the performance of grinding and polishing in the fabrication of large mirrors. We introduce a model of active stressed lap for the fabrication of a 4 m f/1.5 mirror based on finite element analysis (FEA), and the lap surface accuracy achieves RMS<1.8  μm in the FEA method. Using the lap surface measurement system, experimental verification is put forward, and the RMS of the measured lap surface is within 2 μm in practice. A general improvement in lap surface accuracy using the Zernike polynomial is shown. After compensating the calculation errors, the lap surface accuracy is improved by 8%-23%, and achieves RMS<1.5  μm, which is appropriate for practical grinding and polishing. PMID:25967173

  17. Insights: A LAP on Moles: Teaching an Important Concept.

    ERIC Educational Resources Information Center

    Ihde, John

    1985-01-01

    Describes a learning activity packet (LAP) designed to help students understand the basic concept of the mole as a chemical unit; know relationships between the mole and atomic weights in the periodic table; and solve basic conversion problems involving moles, atoms, and molecules. (JN)

  18. Lapping slurry

    DOEpatents

    Simandl, Ronald F.; Upchurch, Victor S.; Leitten, Michael E.

    1999-01-01

    Improved lapping slurries provide for easier and more thorough cleaning of alumina workpieces, as well as inhibit corrosion of the lapping table and provide for easier cleaning of the lapping equipment. The unthickened lapping slurry comprises abrasive grains such as diamond abrasive dispersed in a carrier comprising water, glycerine, and triethanolamine. The thickened lapping slurry comprises abrasive grains such as diamond abrasive dispersed in a carrier comprising water, glycerine, triethanolamine, a water soluble silicate, and acid.

  19. Lapping slurry

    DOEpatents

    Simandl, R.F.; Upchurch, V.S.; Leitten, M.E.

    1999-01-05

    Improved lapping slurries provide for easier and more thorough cleaning of alumina work pieces, as well as inhibit corrosion of the lapping table and provide for easier cleaning of the lapping equipment. The unthickened lapping slurry comprises abrasive grains such as diamond abrasive dispersed in a carrier comprising water, glycerine, and triethanolamine. The thickened lapping slurry comprises abrasive grains such as diamond abrasive dispersed in a carrier comprising water, glycerine, triethanolamine, a water soluble silicate, and acid. 1 fig.

  20. Learning Activity Package, Biology, LAPs 20, 30, 31, 32, and 33.

    ERIC Educational Resources Information Center

    Rhoden, Bruce

    Included is a set of five teacher-prepared Learning Activity Packages (LAPs) for individualized instruction in topics in biology. The units cover the topics of genetic continuity, methods of investigation, cell biology, genetics, and animal physiology. Each unit contains a rationale for the material; a list of behavioral objectives for the unit; a…

  1. Learning Activity Package, Algebra 93-94, LAPs 12-22.

    ERIC Educational Resources Information Center

    Evans, Diane

    A set of 11 teacher-prepared Learning Activity Packages (LAPs) in beginning algebra, these units cover sets, properties of operations, operations over real numbers, open expressions, solution sets of equations and inequalities, equations and inequalities with two variables, solution sets of equations with two variables, exponents, factoring and…

  2. Learning Activity Package, Physical Science. LAP Numbers 5, 6, and 7.

    ERIC Educational Resources Information Center

    Williams, G. J.

    These three units of the Learning Activity Packages (LAPs) for individualized instruction in physical science cover the physical and chemical properties of water, dehydration of crystals, solutions, acidity, strong and weak bases, neutral properties of salts, amorphous forms of carbon, hydrocarbons, and petroleum products. Each unit contains a…

  3. Learning Activity Package, Physical Science. LAP Numbers 8, 9, 10, and 11.

    ERIC Educational Resources Information Center

    Williams, G. J.

    These four units of the Learning Activity Packages (LAPs) for individualized instruction in physical science cover nuclear reactions, alpha and beta particles, atomic radiation, medical use of nuclear energy, fission, fusion, simple machines, Newton's laws of motion, electricity, currents, electromagnetism, Oersted's experiment, sound, light,…

  4. Learning Activity Package, Chemistry I. LAP Numbers 22, 23, 24, 25, 26, 27, and 28.

    ERIC Educational Resources Information Center

    Jones, Naomi

    As a set of seven Learning Activity Packages (LAPs) for individualized instruction in chemistry, the units cover the unit system, matter, energy, atomic structures, chemical formulas, physical states of matter, solutions and suspensions, ionization, acids, bases, and salts. Each unit contains a rationale for the material; a list of behavioral…

  5. Learning Activity Package, Physical Science. LAP Numbers 1, 2, 3, and 4.

    ERIC Educational Resources Information Center

    Williams, G. J.

    These four units of the Learning Activity Packages (LAPs) for individualized instruction in physical science cover measuring techniques, operations of instruments, metric system heat, matter, energy, elements, atomic numbers, isotopes, molecules, mixtures, compounds, physical and chemical properties, liquids, solids, and gases. Each unit contains…

  6. Using Document Reading Activity Packets (DRAP) in the Classroom.

    ERIC Educational Resources Information Center

    Adomanis, James F.; Schulz, Constance

    1987-01-01

    Reviews a Document Reading Activity Packet (DRAP) revolving around the "Fort Washington Incident" of the War of 1812 and the resulting court martial of Captain Samuel T. Dyson. Explains this exercise is designed to stimulate students' interest in their own state histories as well as stimulate their curiosity for further research. (BSR)

  7. Office Reprographics. Instructor's Guide. Student Activity Packet. Office Occupations.

    ERIC Educational Resources Information Center

    Johnson, Diane E.

    This training package, one in a series of instructional modules consisting of an instructor's guide and a student activity packet, deals with office reprographics. Included in the instructor's guide are general directions for implementing the presentation; a detailed guide for teaching the lesson that includes performance objectives, suggestions…

  8. [Geography Awareness Week Activity Packet, 1987 and 1988.

    ERIC Educational Resources Information Center

    Texas Alliance for Geographic Education, College Station.

    This resource packet contains materials and suggestions to integrate National Geography Awareness Week for 1987 and 1988 into elementary and secondary education in Texas. The materials for 1987 include: (1) a pamphlet for a balloon release; (2) a collection of ideas for student activities; (3) a description of two field experiences; (4) a…

  9. Learning Activity Package, Social Studies 124, LAPs 29 Through 34.

    ERIC Educational Resources Information Center

    Franklin, Mary Ann

    A set of five teacher-prepared Learning Activity Packages for individualized instruction on western civilization at the twelfth grade level includes the following units: Establishment of Western Civilization; Middle Period of Western Civilization; Islam and the Saracenic Civilization; the Renaissance and Reformation; and Modern Western…

  10. Learning Activity Package, Social Studies 112, LAPs 17 Through 25.

    ERIC Educational Resources Information Center

    Burgdorf, Jane

    A set of nine teacher-prepared Learning Activity Packages for individualized instruction in United States history at the eleventh grade level includes the following topics: New World Settlement and Colonial Growth; American Revolution and the New Nation; Developing an Effective National Government; The Growth of Nationalism and Democracy…

  11. Children's Literature with a Science Emphasis: Twenty Teacher-Developed K-8 Activity Packets.

    ERIC Educational Resources Information Center

    Butler, Malcolm B.

    This document features 10 science activity packets developed for elementary students by science teachers in a graduate seminar. The activity packets were designed to cover existing commercial children's books on specific content areas. The 10 activity packets are: (1) "Bringing the Rain to Kapiti Plain," which explains the water cycle; (2)…

  12. Research on the design of surface acquisition system of active lap based on FPGA and FX2LP

    NASA Astrophysics Data System (ADS)

    Zhao, Hongshen; Li, Xiaojin; Fan, Bin; Zeng, Zhige

    2014-08-01

    In order to research the dynamic surface shape changes of active lap during the processing, this paper introduces a dynamic surface shape acquisition system of active lap using FPGA and USB communication. This system consists of high-precision micro-displacement sensor array, acquisition board, PC computer composition, and acquisition circuit board includes six sub-boards based on FPGA, a hub-board based on FPGA and USB communication. A sub-board is responsible for a number of independent channel sensors' data acquisition; hub-board is responsible for creating encoder simulation tools to active lap deformation control system with location information, sending synchronization information to latch the sensor data in all of the sub-boards for a time, while addressing the sub-boards to gather the sensor data in each sub-board one by one and transmitting all the sensor data together with location information via the USB chip FX2LP to the host computer. Experimental results show that the system is capable of fixing the location and speed of active lap, meanwhile the control of surface transforming and dynamic surface data acquisition at a certain location in the processing is implemented.

  13. Self-organising continuous attractor networks with multiple activity packets, and the representation of space.

    PubMed

    Stringer, S M; Rolls, E T; Trappenberg, T P

    2004-01-01

    'Continuous attractor' neural networks can maintain a localised packet of neuronal activity representing the current state of an agent in a continuous space without external sensory input. In applications such as the representation of head direction or location in the environment, only one packet of activity is needed. For some spatial computations a number of different locations, each with its own features, must be held in memory. We extend previous approaches to continuous attractor networks (in which one packet of activity is maintained active) by showing that a single continuous attractor network can maintain multiple packets of activity simultaneously, if each packet is in a different state space or map. We also show how such a network could by learning self-organise to enable the packets in each space to be moved continuously in that space by idiothetic (motion) inputs. We show how such multi-packet continuous attractor networks could be used to maintain different types of feature (such as form vs colour) simultaneously active in the correct location in a spatial representation. We also show how high-order synapses can improve the performance of these networks, and how the location of a packet could be read by motor networks. The multiple packet continuous attractor networks described here may be used for spatial representations in brain areas such as the parietal cortex and hippocampus.

  14. Animal Homes and Habitats. A Fall Activity Packet for Third Grade.

    ERIC Educational Resources Information Center

    Jackson Community Coll., MI. Dahlem Environmental Education Center.

    This instructional packet is one of 14 school environmental education programs developed for use in the classroom and at the Dahlem Environmental Education Center (DEEC) of the Jackson Community College (Michigan). Provided in the packet are pre-trip activities, field trip activities, and post-trip activities which focus on animal populations and…

  15. The Interesting World of Insects. A Fall Activity Packet for First Grade.

    ERIC Educational Resources Information Center

    Jackson Community Coll., MI. Dahlem Environmental Education Center.

    This instructional packet is one of 14 school environmental education programs developed for use in the classroom and at the Dahlem Environmental Education Center (DEEC) of the Jackson Community College (Michigan). Provided in the packet are pre-trip activities, field trip activities, and post-trip activities which focus on the characteristics and…

  16. Student Activity Packet for the California State Capitol Museum.

    ERIC Educational Resources Information Center

    2001

    This packet contains materials to help fourth and fifth grade teachers provide their students with background information for field trips to the California State Capitol Museum (Sacramento). The working museum focuses on the theme areas of California history, the state government/legislative process, and state symbols. The packet presents teacher…

  17. Slow-light Airy wave packets and their active control via electromagnetically induced transparency

    NASA Astrophysics Data System (ADS)

    Hang, Chao; Huang, Guoxiang

    2013-07-01

    We propose a scheme to generate (3+1)-dimensional slow-light Airy wave packets in a resonant Λ-type three-level atomic gas via electromagnetically induced transparency. We show that in the absence of dispersion the Airy wave packets formed by a probe field consist of two Airy wave packets accelerated in transverse directions and a longitudinal Gaussian pulse with a constant propagating velocity lowered to 10-5c (c is the light speed in vacuum). We also show that in the presence of dispersion it is possible to generate another type of slow-light Airy wave packet consisting of two Airy beams in transverse directions and an Airy wave packet in the longitudinal direction. In this case, the longitudinal velocity of the Airy wave packet can be further reduced during propagation. Additionally, we further show that the transverse accelerations (or bending) of the both types of slow-light Airy wave packets can be completely eliminated and the motional trajectories of them can be actively manipulated and controlled by using a Stern-Gerlach gradient magnetic field.

  18. Yeast Breads. Learning Activity Pack and Instructor's Guide 5.15a. Commercial Foods and Culinary Arts Competency-Based Series. Section 5: Basic Food Preparation.

    ERIC Educational Resources Information Center

    Florida State Univ., Tallahassee. Center for Studies in Vocational Education.

    This document consists of a learning activity packet (LAP) for the student and an instructor's guide for the teacher. The LAP is intended to acquaint occupational home economics students with yeast breads and their ingredients. Illustrated information sheets and learning activities are provided in these areas: yeast breads and their ingredients,…

  19. Beverages. Learning Activity Pack and Instructor's Guide 5.3. Commercial Foods and Culinary Arts Competency-Based Series. Section 5: Basic Food Preparation.

    ERIC Educational Resources Information Center

    Florida State Univ., Tallahassee. Center for Studies in Vocational Education.

    This document consists of a learning activity packet (LAP) for the student and an instructor's guide for the teacher. The LAP is intended to acquaint occupational home economics students with preparing and serving beverages and caring for the equipment used to make them. Illustrated information sheets and learning activities are provided in these…

  20. Buying, Preparing, and Cooking Shellfish. Learning Activity Pack and Instructor's Guide 5.13c. Commercial Foods and Culinary Arts Competency-Based Series. Section 5: Basic Food Preparation.

    ERIC Educational Resources Information Center

    Florida State Univ., Tallahassee. Center for Studies in Vocational Education.

    This document consists of a learning activity packet (LAP) for the student and an instructor's guide for the teacher. The LAP is intended to acquaint occupational home economics students with the various market forms of shellfish and how to clean, prepare, and cook them. Illustrated information sheets and learning activities are provided in these…

  1. Dining Room Service/Clearing and Cleaning Tables. Learning Activity Pack and Instructor's Guide 8.1c. Commercial Foods and Culinary Arts Competency-Based Series. Section 8: Related Services.

    ERIC Educational Resources Information Center

    Florida State Univ., Tallahassee. Center for Studies in Vocational Education.

    This document consists of a learning activity packet (LAP) for the student and an instructor's guide for the teacher. The LAP is intended to acquaint occupational home economics students with efficient table clearing and cleaning duties. Illustrated information sheets and learning activities are provided in these areas: table clearing and cleaning…

  2. Dining Room Service/Performing Sidework. Learning Activity Pack and Instructor's Guide 8.1b. Commercial Foods and Culinary Arts Competency-Based Series. Section 8: Related Services.

    ERIC Educational Resources Information Center

    Florida State Univ., Tallahassee. Center for Studies in Vocational Education.

    This document consists of a learning activity packet (LAP) for the student and an instructor's guide for the teacher. The LAP is intended to acquaint occupational home economics students with kinds of dining room and food-service work other than serving food directly to a guest. Illustrated information sheets and learning activities are provided…

  3. Using Cooking, Baking, and Cutting Terms. Learning Activity Pack and Instructor's Guide 5.1a. Commercial Foods and Culinary Arts Competency-Based Series. Section 5: Basic Food Preparation.

    ERIC Educational Resources Information Center

    Florida State Univ., Tallahassee. Center for Studies in Vocational Education.

    This document consists of a learning activity packet (LAP) for the student and an instructor's guide for the teacher. The LAP is intended to acquaint occupational home economics students with some of the terms used in recipes. Illustrated information sheets and learning activities are provided on important cooking, baking, and cutting terms. The…

  4. Proper Use and Care of Miscellaneous Equipment. Learning Activity Pack and Instructor's Guide 4.2. Commercial Foods and Culinary Arts Competency-Based Series. Section 4: Equipment Handling, Operation, and Maintenance.

    ERIC Educational Resources Information Center

    Florida State Univ., Tallahassee. Center for Studies in Vocational Education.

    This document consists of a learning activity packet (LAP) for the student and an instructor's guide for the teacher. The LAP is intended to acquaint occupational home economics students with the proper use and care of various pieces of commercial cooking equipment. Illustrated information sheets and learning activities are provided on each of the…

  5. Using Herbs and Spices/Preparing Sauces and Gravies. Learning Activity Pack and Instructor's Guide 5.11. Commercial Foods and Culinary Arts Competency-Based Series. Section 5: Basic Food Preparation.

    ERIC Educational Resources Information Center

    Florida State Univ., Tallahassee. Center for Studies in Vocational Education.

    This document consists of a learning activity packet (LAP) for the student and an instructor's guide for the teacher. The LAP is intended to acquaint occupational home economics students with herbs and spices and the selection and preparation of sauces and gravies. Illustrated information sheets and learning activities are provided in these areas:…

  6. Time Management. Office Occupations. Audiovisual Package. Instructor's Guide. Student Activity Packet.

    ERIC Educational Resources Information Center

    Johnson, Diane E.

    This instructor's guide and student activity packet (together with a slide/tape presentation not available here) comprise a module for the postsecondary office occupations education competency area of time management. Modules for other competency areas are available separately. The purpose stated for the module is to help students obtain basic…

  7. Viva Nuestra Amistad IV: Spanish Activity Packet (Long Live our Friendship).

    ERIC Educational Resources Information Center

    Cobb, Hubert

    This Spanish activity packet was designed to be used with the map study portion of each of twelve units in a second year course in Spanish. Each unit deals with a different Spanish-speaking country or place, such as Puerto Rico, Colombia, Venezuela, or Peru. Included here are worksheets, games, map outlines, crossword puzzles, skits, and cultural…

  8. Math Skills for Business. Instructor's Guide. Student Activity Packet. Office Occupations.

    ERIC Educational Resources Information Center

    Johnson, Diane E.

    This training package, one in a series of instructional modules consisting of an instructor's guide and a student activity packet, deals with math skills for business. Included in the instructor's guide are general directions for implementing the presentation; a detailed guide for teaching the lesson that includes performance objectives,…

  9. Starch Products. Learning Activity Pack and Instructor's Guide 5.9. Commercial Foods and Culinary Arts Competency-Based Series. Section 5: Basic Food Preparation.

    ERIC Educational Resources Information Center

    Florida State Univ., Tallahassee. Center for Studies in Vocational Education.

    This document consists of a learning activity packet (LAP) for the student and an instructor's guide for the teacher. The LAP is intended to acquaint occupational home economics students with some basic information about starches and with three starch products found throughout the world: cereals and rice, potatoes, and pasta. Illustrated…

  10. Quick Breads. Learning Activity Pack and Instructor's Guide 5.15b. Commercial Foods and Culinary Arts Competency-Based Series. Section 5: Basic Food Preparation.

    ERIC Educational Resources Information Center

    Florida State Univ., Tallahassee. Center for Studies in Vocational Education.

    This document consists of a learning activity packet (LAP) for the student and an instructor's guide for the teacher. The LAP is intended to acquaint occupational home economics students with the major types of quick breads, the equipment and ingredients used to prepare them, and the general procedures for mixing and baking them. Illustrated…

  11. Introduction to Sandwiches. Learning Activity Pack and Instructor's Guide 5.4a. Commercial Foods and Culinary Arts Competency-Based Series. Section 5: Basic Food Preparation.

    ERIC Educational Resources Information Center

    Florida State Univ., Tallahassee. Center for Studies in Vocational Education.

    This document consists of a learning activity packet (LAP) for the student and an instructor's guide for the teacher. The LAP is intended to acquaint occupational home economics students with types of sandwiches and their ingredients, to give tips on making and handling sandwich ingredients, and to explain how to set up a sandwich counter.…

  12. Organizing Work Stations and Simplifying Work. Learning Activity Pack and Instructor's Guide 5.2. Commercial Foods and Culinary Arts Competency-Based Series. Section 5: Basic Food Preparation.

    ERIC Educational Resources Information Center

    Florida State Univ., Tallahassee. Center for Studies in Vocational Education.

    This document consists of a learning activity packet (LAP) for the student and an instructor's guide for the teacher. The LAP is intended to acquaint occupational home economics students with organizing kitchen work areas to enable kitchen workers to move more efficiently and simplify their work by making good use of equipment, time, and energy.…

  13. Dining Room Service/Setting Table Covers. Learning Activity Pack and Instructor's Guide 8.1a. Commercial Foods and Culinary Arts Competency-Based Series. Section 8: Related Services.

    ERIC Educational Resources Information Center

    Florida State Univ., Tallahassee. Center for Studies in Vocational Education.

    This document consists of a learning activity packet (LAP) for the student and an instructor's guide for the teacher. The LAP is intended to acquaint occupational home economics students with table appointments and to illustrate table covers for breakfast, luncheon, and dinner; for counter and cafeteria service; and for banquets and buffets.…

  14. Wind in the Willows--Theatre Activity Packet.

    ERIC Educational Resources Information Center

    New York City Board of Education, Brooklyn, NY. Div. of Curriculum and Instruction.

    Part of the New York City Board of Education's Early Stages program, and intended for elementary and secondary school teachers who wish to include a unit on theater in their classes, this guide offers suggestions for lessons and activities to accompany viewing a performance of "Wind in the Willows" at the Nederlander Theater. Part one of the guide…

  15. Pseudomonas putida Fis Binds to the lapF Promoter In Vitro and Represses the Expression of LapF

    PubMed Central

    Lahesaare, Andrio; Moor, Hanna; Kivisaar, Maia; Teras, Riho

    2014-01-01

    The biofilm matrix of the rhizospheric bacterium Pseudomonas putida consists mainly of a proteinaceous component. The two largest P. putida proteins, adhesins LapA and LapF, are involved in biofilm development but prevail in different developmental stages of the biofilm matrix. LapA is abundant in the initial stage of biofilm formation whereas LapF is found in the mature biofilm. Although the transcriptional regulation of the adhesins is not exhaustively studied, some factors that can be involved in their regulation have been described. For example, RpoS, the major stress response sigma factor, activates, and Fis represses LapF expression. This study focused on the LapF expression control by Fis. Indeed, using DNase I footprint analysis a Fis binding site Fis-F2 was located 150 bp upstream of the lapF gene coding sequence. The mapped 5′ end of the lapF mRNA localized the promoter to the same region, overlapping with the Fis binding site Fis-F2. Monitoring the lapF promoter activity by a β-galactosidase assay revealed that Fis overexpression causes a 4-fold decrease in the transcriptional activity. Furthermore, mutations that diminished Fis binding to the Fis-F2 site abolished the repression of the lapF promoter. Thus, these data suggest that Fis is involved in the biofilm regulation via repression of LapF expression. PMID:25545773

  16. Lap seat belt injuries.

    PubMed

    Hingston, G R

    1996-08-01

    Over a 4 month period, three patients presented acutely to Whangarei Area Hospital after receiving severe abdominal injuries caused directly by lap seat belts. They were involved in road traffic crashes and were all seated in the middle rear seat of the car. The aim of this paper is to alert people to the injuries that can occur from two point lap belts. To this end, the patients and injuries sustained are described and a review of the literature is presented.

  17. Threatened and Endangered Species: Tour Packet.

    ERIC Educational Resources Information Center

    Coats, Victoria; Samia, Cory

    This resource unit contains a teacher information packet and a middle school student activity packet to be used in creating a threatened and endangered species unit. The packet of student activities is designed to help maximize a field trip to the zoo and build on students' zoo experience in the classroom. The teacher information packet covers the…

  18. Recognizing Proofreaders' Marks and Using Them in Editing. Audiovisual Package. Instructor's Guide [and] Student Activity Packet. Office Occupations.

    ERIC Educational Resources Information Center

    Johnson, Diane E.

    Designed for use with 38 full-color slides and a cassette tape presentation, this instructional package consists of an instructor's guide and a student activity packet. The instructor's guide includes general instructions for presenting the instructional unit as well as specific instructions for introducing, implementing, and evaluating student…

  19. Tropical Animal Tour Packet. Metro.

    ERIC Educational Resources Information Center

    Metro Washington Park Zoo, Portland, OR. Educational Services Div.

    This packet is designed to assist teachers in creating a tropical animals lesson plan that centers around a visit to the zoo. A teacher packet is divided into eight parts: (1) goals and objectives; (2) what to expect at the zoo; (3) student activities (preparatory activities, on-site activities, and follow-up activities); (4) background…

  20. Lap belt injuries in children.

    PubMed

    McGrath, N; Fitzpatrick, P; Okafor, I; Ryan, S; Hensey, O; Nicholson, A J

    2010-01-01

    The use of adult seat belts without booster seats in young children may lead to severe abdominal, lumbar or cervical spine and head and neck injuries. We describe four characteristic cases of lap belt injuries presenting to a tertiary children's hospital over the past year in addition to a review of the current literature. These four cases of spinal cord injury, resulting in significant long-term morbidity in the two survivors and death in one child, arose as a result of lap belt injury. These complex injuries are caused by rapid deceleration characteristic of high impact crashes, resulting in sudden flexion of the upper body around the fixed lap belt, and consequent compression of the abdominal viscera between the lap belt and spine. This report highlights the dangers of using lap belts only without shoulder straps. Age-appropriate child restraint in cars will prevent these injuries.

  1. GUIDANCE PACKET.

    ERIC Educational Resources Information Center

    Modern Language Association of America, New York, NY.

    THIS PACKET PROVIDES VOCATIONAL AND ACADEMIC ADVICE TO THE LANGUAGE LEARNER AND USEFUL INFORMATION ABOUT LANGUAGE LEARNING TO TEACHERS, COUNSELORS, AND ADMINISTRATORS. THE DOCUMENTS, PUBLISHED FROM 1963 TO 1967, ARE--(1) "VOCATIONAL OPPORTUNITIES FOR FOREIGN LANGUAGE STUDENTS" BY GILBERT C. KETTELKAMP, (2) "ADVICE TO THE LANGUAGE LEARNER" BY…

  2. Information Packet.

    ERIC Educational Resources Information Center

    Cable Television Information Center, Washington, DC.

    Documents included in the packet are Federal Communications Commission (FCC) releases dealing with cable television and similar notices from other organizations. Among these are an interpretation of the FCC local origination decision of Dec. 9, 1974, explaining the repeal of the requirement that small cable systems originate programing while…

  3. Vocational and Industrial Arts Packets.

    ERIC Educational Resources Information Center

    Maine Audubon Society, Falmouth.

    This book is a teacher's guide to energy alternatives. It is divided into seven informational packets on the following topics: parabolic solar concentrators, solar flat plate collectors, wood as fuel, heat loss, bio-gas, wind, and water. Each packet contains background information for the teachers and learning activities for the students. The…

  4. USDA's Great Nutrition Adventure [Packet].

    ERIC Educational Resources Information Center

    Department of Agriculture, Washington, DC.

    This nutrition education packet provides information to schools setting up healthy school meal programs and nutrition education programs. Team Nutrition schools will involve students, teachers, families, food service personnel, and community organizations in nutrition education activities. The packet contains fact sheets that focus on: the Great…

  5. Design Concepts. Teacher Edition. Marketing Education LAPs.

    ERIC Educational Resources Information Center

    Hawley, Jana

    This learning activity packet is designed to help prepare students to acquire a competency: how to use design concepts in preparation for a career in the fashion industry. The unit consists of the competency, four objectives, suggested learning activities, transparency masters, and a pretest/posttest with answer keys. Activities include a…

  6. Textiles. Teacher Edition. Marketing Education LAPs.

    ERIC Educational Resources Information Center

    Hawley, Jana

    This learning activity packet is designed to help students to acquire a competency: how to use knowledge of textile design to gain expertise in preparation for a career in the fashion industry. The unit consists of the competency, four objectives, suggested learning activities, transparency masters, and a pretest/posttest with answer keys.…

  7. Extensible packet processing architecture

    DOEpatents

    Robertson, Perry J.; Hamlet, Jason R.; Pierson, Lyndon G.; Olsberg, Ronald R.; Chun, Guy D.

    2013-08-20

    A technique for distributed packet processing includes sequentially passing packets associated with packet flows between a plurality of processing engines along a flow through data bus linking the plurality of processing engines in series. At least one packet within a given packet flow is marked by a given processing engine to signify by the given processing engine to the other processing engines that the given processing engine has claimed the given packet flow for processing. A processing function is applied to each of the packet flows within the processing engines and the processed packets are output on a time-shared, arbitered data bus coupled to the plurality of processing engines.

  8. Assembly of Lipopolysaccharide in Escherichia coli Requires the Essential LapB Heat Shock Protein*

    PubMed Central

    Klein, Gracjana; Kobylak, Natalia; Lindner, Buko; Stupak, Anna; Raina, Satish

    2014-01-01

    Here, we describe two new heat shock proteins involved in the assembly of LPS in Escherichia coli, LapA and LapB (lipopolysaccharide assembly protein A and B). lapB mutants were identified based on an increased envelope stress response. Envelope stress-responsive pathways control key steps in LPS biogenesis and respond to defects in the LPS assembly. Accordingly, the LPS content in ΔlapB or Δ(lapA lapB) mutants was elevated, with an enrichment of LPS derivatives with truncations in the core region, some of which were pentaacylated and exhibited carbon chain polymorphism. Further, the levels of LpxC, the enzyme that catalyzes the first committed step of lipid A synthesis, were highly elevated in the Δ(lapA lapB) mutant. Δ(lapA lapB) mutant accumulated extragenic suppressors that mapped either to lpxC, waaC, and gmhA, or to the waaQ operon (LPS biosynthesis) and lpp (Braun's lipoprotein). Increased synthesis of either FabZ (3-R-hydroxymyristoyl acyl carrier protein dehydratase), slrA (novel RpoE-regulated non-coding sRNA), lipoprotein YceK, toxin HicA, or MurA (UDP-N-acetylglucosamine 1-carboxyvinyltransferase) suppressed some of the Δ(lapA lapB) defects. LapB contains six tetratricopeptide repeats and, at the C-terminal end, a rubredoxin-like domain that was found to be essential for its activity. In pull-down experiments, LapA and LapB co-purified with LPS, Lpt proteins, FtsH (protease), DnaK, and DnaJ (chaperones). A specific interaction was also observed between WaaC and LapB. Our data suggest that LapB coordinates assembly of proteins involved in LPS synthesis at the plasma membrane and regulates turnover of LpxC, thereby ensuring balanced biosynthesis of LPS and phospholipids consistent with its essentiality. PMID:24722986

  9. Assembly of lipopolysaccharide in Escherichia coli requires the essential LapB heat shock protein.

    PubMed

    Klein, Gracjana; Kobylak, Natalia; Lindner, Buko; Stupak, Anna; Raina, Satish

    2014-05-23

    Here, we describe two new heat shock proteins involved in the assembly of LPS in Escherichia coli, LapA and LapB (lipopolysaccharide assembly protein A and B). lapB mutants were identified based on an increased envelope stress response. Envelope stress-responsive pathways control key steps in LPS biogenesis and respond to defects in the LPS assembly. Accordingly, the LPS content in ΔlapB or Δ(lapA lapB) mutants was elevated, with an enrichment of LPS derivatives with truncations in the core region, some of which were pentaacylated and exhibited carbon chain polymorphism. Further, the levels of LpxC, the enzyme that catalyzes the first committed step of lipid A synthesis, were highly elevated in the Δ(lapA lapB) mutant. Δ(lapA lapB) mutant accumulated extragenic suppressors that mapped either to lpxC, waaC, and gmhA, or to the waaQ operon (LPS biosynthesis) and lpp (Braun's lipoprotein). Increased synthesis of either FabZ (3-R-hydroxymyristoyl acyl carrier protein dehydratase), slrA (novel RpoE-regulated non-coding sRNA), lipoprotein YceK, toxin HicA, or MurA (UDP-N-acetylglucosamine 1-carboxyvinyltransferase) suppressed some of the Δ(lapA lapB) defects. LapB contains six tetratricopeptide repeats and, at the C-terminal end, a rubredoxin-like domain that was found to be essential for its activity. In pull-down experiments, LapA and LapB co-purified with LPS, Lpt proteins, FtsH (protease), DnaK, and DnaJ (chaperones). A specific interaction was also observed between WaaC and LapB. Our data suggest that LapB coordinates assembly of proteins involved in LPS synthesis at the plasma membrane and regulates turnover of LpxC, thereby ensuring balanced biosynthesis of LPS and phospholipids consistent with its essentiality.

  10. C/EBPβ-LAP*/LAP Expression Is Mediated by RSK/eIF4B-Dependent Signalling and Boosted by Increased Protein Stability in Models of Monocytic Differentiation

    PubMed Central

    Christmann, Martin; Friesenhagen, Judith; Westphal, Andreas; Pietsch, Daniel; Brand, Korbinian

    2015-01-01

    The transcription factor C/EBPβ plays a key role in monocytic differentiation and inflammation. Its small isoform LIP is associated with proliferation at early premonocytic developmental stages and regulated via mTOR-dependent signalling. During later stages of (pre)monocytic differentiation there is a considerable increase in the large C/EBPβ isoforms LAP*/LAP which inhibit proliferation thus supporting terminal differentiation. Here, we showed in different models of monocytic differentiation that this dramatic increase in the LAP*/LAP protein and LAP/LIP ratio was accompanied by an only modest/retarded mRNA increase suggesting an important role for (post)translational mechanisms. We found that LAP*/LAP formation was induced via MEK/RSK-dependent cascades, whereas mTOR/S6K1 were not involved. Remarkably, LAP*/LAP expression was dependent on phosphorylated eIF4B, an acceleratory protein of RNA helicase eIF4A. PKR inhibition reduced the expression of eIF4B and C/EBPβ in an eIF2α-independent manner. Furthermore, under our conditions a marked stabilisation of LAP*/LAP protein occurred, accompanied by reduced chymotrypsin-like proteasome/calpain activities and increased calpastatin levels. Our study elucidates new signalling pathways inducing LAP*/LAP expression and indicates new alternative PKR functions in monocytes. The switch from mTOR- to RSK-mediated signalling to orchestrate eIF4B-dependent LAP*/LAP translation, accompanied by increased protein stability but only small mRNA changes, may be a prototypical example for the regulation of protein expression during selected processes of differentiation/proliferation. PMID:26646662

  11. Active interface debonding detection of a concrete-filled steel tube with piezoelectric technologies using wavelet packet analysis

    NASA Astrophysics Data System (ADS)

    Xu, Bin; Zhang, Ting; Song, Gangbing; Gu, Haichang

    2013-03-01

    Concrete-Filled Steel Tube (CFST) has been widely adopted in high-rise buildings and bridges as a typical structural member carrying vertical loads in recent years. The debonding between the steel tube and the concrete can dramatically reduce the confinement effect of steel tube on the concrete and decrease the load-carrying capacity and the ductility of the CFST. It is still challenging to develop reliable debonding monitoring and detection techniques for CFST because of the inaccessibility of the interface. In this study, an active interface condition monitoring approach for CFST by the use of lead zirconate titanate (PZT) piezoceramics based functional smart aggregates (SAs) embedded in concrete as actuator and PZT patches bonded on the surface of the steel tube as sensors is proposed and verified experimentally. Laboratory tests are performed on the CFST column, in which the deboning is mimicked by setting four thin styrofoam plates with different sizes on different locations of the four internal surfaces of the steel tube, respectively, before casting the concrete. The responses of the PZT sensors are measured when each SA is excited with sweep sinusoidal signals. According to the Fourier spectra and two evaluation indices based on the wavelet packet analysis on the PZT sensors measurements, the artificially mimicked debonding areas are detected successfully. Analysis on the sensitivity of the two evaluation indices shows that the indices based on wavelet packet analysis are more sensitive to the debonding defect. The proposed PZT based active debonding monitoring method provides an innovative approach to detect the debonding damage of CFST columns.

  12. P-LAP/IRAP-induced cell proliferation and glucose uptake in endometrial carcinoma cells via insulin receptor signaling

    PubMed Central

    Shibata, Kiyosumi; Kajiyama, Hiroaki; Ino, Kazuhiko; Nawa, Akihiro; Nomura, Seiji; Mizutani, Shigehiko; Kikkawa, Fumitaka

    2007-01-01

    Background Hyperglycemia or hyperinsulinemia contributes to poorer endometrial cancer survival. It was shown that P-LAP/IRAP translocates to the plasma membrane in response to insulin stimulation. Recently, we demonstrated that P-LAP/IRAP is associated with a poor prognosis in endometrial adenocarcinoma patients. The aim of this study was to examine whether the malignant potential of endometrial cancer enhanced by P-LAP/IRAP is due to increased glucose uptake via the P-LAP/IRAP-mediated activation of insulin signaling. Methods We transfected P-LAP/IRAP cDNA into A-MEC cells (endometrial adenocarcinoma cell line), and A-MEC-LAP cells expressed a remarkably high level of GLUT4 proteins. Results 3H-2-deoxyglucose uptake which responds to insulin in A-MEC-LAP cells was significantly higher than that of A-MEC-pc cells. A-MEC-LAP cells exhibited a significant growth-stimulatory effect compared to A-MEC-pc cells. A-MEC-LAP cells expressed a remarkably high level of p85PI3K protein compared to A-MEC-pc cells, and showed a higher degree of AKT phosphorylation by insulin stimulation. Conclusion In summary, P-LAP/IRAP was involved in the increasing malignant potential of endometrial cancer mediated by insulin. P-LAP/IRAP was suggested to be a potential new target of molecular-targeted therapy for endometrial cancer. PMID:17233921

  13. Additive manufacturing of tools for lapping glass

    NASA Astrophysics Data System (ADS)

    Williams, Wesley B.

    2013-09-01

    Additive manufacturing technologies have the ability to directly produce parts with complex geometries without the need for secondary processes, tooling or fixtures. This ability was used to produce concave lapping tools with a VFlash 3D printer from 3D Systems. The lapping tools were first designed in Creo Parametric with a defined constant radius and radial groove pattern. The models were converted to stereolithography files which the VFlash used in building the parts, layer by layer, from a UV curable resin. The tools were rotated at 60 rpm and used with 120 grit and 220 grit silicon carbide lapping paste to lap 0.750" diameter fused silica workpieces. The samples developed a matte appearance on the lapped surface that started as a ring at the edge of the workpiece and expanded to the center. This indicated that as material was removed, the workpiece radius was beginning to match the tool radius. The workpieces were then cleaned and lapped on a second tool (with equivalent geometry) using a 3000 grit corundum aluminum oxide lapping paste, until a near specular surface was achieved. By using lapping tools that have been additively manufactured, fused silica workpieces can be lapped to approach a specified convex geometry. This approach may enable more rapid lapping of near net shape workpieces that minimize the material removal required by subsequent polishing. This research may also enable development of new lapping tool geometry and groove patterns for improved loose abrasive finishing.

  14. Bohmian trajectories of Airy packets

    NASA Astrophysics Data System (ADS)

    Nassar, Antonio B.; Miret-Artés, Salvador

    2014-09-01

    The discovery of Berry and Balazs in 1979 that the free-particle Schrödinger equation allows a non-dispersive and accelerating Airy-packet solution has taken the folklore of quantum mechanics by surprise. Over the years, this intriguing class of wave packets has sparked enormous theoretical and experimental activities in related areas of optics and atom physics. Within the Bohmian mechanics framework, we present new features of Airy wave packet solutions to Schrödinger equation with time-dependent quadratic potentials. In particular, we provide some insights to the problem by calculating the corresponding Bohmian trajectories. It is shown that by using general space-time transformations, these trajectories can display a unique variety of cases depending upon the initial position of the individual particle in the Airy wave packet. Further, we report here a myriad of nontrivial Bohmian trajectories associated to the Airy wave packet. These new features are worth introducing to the subject's theoretical folklore in light of the fact that the evolution of a quantum mechanical Airy wave packet governed by the Schrödinger equation is analogous to the propagation of a finite energy Airy beam satisfying the paraxial equation. Numerous experimental configurations of optics and atom physics have shown that the dynamics of Airy beams depends significantly on initial parameters and configurations of the experimental set-up.

  15. Bohmian trajectories of Airy packets

    SciTech Connect

    Nassar, Antonio B.; Miret-Artés, Salvador

    2014-09-15

    The discovery of Berry and Balazs in 1979 that the free-particle Schrödinger equation allows a non-dispersive and accelerating Airy-packet solution has taken the folklore of quantum mechanics by surprise. Over the years, this intriguing class of wave packets has sparked enormous theoretical and experimental activities in related areas of optics and atom physics. Within the Bohmian mechanics framework, we present new features of Airy wave packet solutions to Schrödinger equation with time-dependent quadratic potentials. In particular, we provide some insights to the problem by calculating the corresponding Bohmian trajectories. It is shown that by using general space–time transformations, these trajectories can display a unique variety of cases depending upon the initial position of the individual particle in the Airy wave packet. Further, we report here a myriad of nontrivial Bohmian trajectories associated to the Airy wave packet. These new features are worth introducing to the subject’s theoretical folklore in light of the fact that the evolution of a quantum mechanical Airy wave packet governed by the Schrödinger equation is analogous to the propagation of a finite energy Airy beam satisfying the paraxial equation. Numerous experimental configurations of optics and atom physics have shown that the dynamics of Airy beams depends significantly on initial parameters and configurations of the experimental set-up.

  16. Nonspreading Wave Packets.

    ERIC Educational Resources Information Center

    Berry, M. V.; Balazs, N. L.

    1979-01-01

    Explains properties of the Airy packet that show that quantum wave functions correspond to a family of orbits and not to a single particle. Introducing the Airy packet into elementary quantum mechanics courses is recommended. (HM)

  17. Loose abrasive slurries for optical glass lapping

    SciTech Connect

    Neauport, Jerome; Destribats, Julie; Maunier, Cedric; Ambard, Chrystel; Cormont, Philippe; Pintault, B.; Rondeau, Olivier

    2010-10-20

    Loose abrasive lapping is widely used to prepare optical glass before its final polishing. We carried out a comparison of 20 different slurries from four different vendors. Slurry particle sizes and morphologies were measured. Fused silica samples were lapped with these different slurries on a single side polishing machine and characterized in terms of surface roughness and depth of subsurface damage (SSD). Effects of load, rotation speed, and slurry concentration during lapping on roughness, material removal rate, and SSD were investigated.

  18. Pediatric lap belt injuries: care and prevention.

    PubMed

    Shoemaker, B L; Ose, M

    1997-01-01

    Motor vehicle collisions are the leading cause of death from injury during childhood. As children outgrow their toddler car seats, they are often restrained by two-point lap belts, which are fashioned for adult body proportions. Those children restrained by two-point lap belts are at risk for intraabdominal and spinal injury during an auto collision. This article explores the mechanisms of injury and identification of "lap belt syndrome." Aspects of nursing care and prevention strategies will be discussed. A case study illustrates and summarizes the cogent aspects of lap belt related injury and child/family care.

  19. Elementary Environmental Learning Packet K-3, Third Revised Edition. [Primary CEL Blocks, Student Activity Cards].

    ERIC Educational Resources Information Center

    Brevard County School Board, Cocoa, FL.

    This environmental education program consists of two levels: primary and intermediate. The learning materials are activity based and incorporate process and subject area skills with knowledge and concern for the environment. The program is also interdisciplinary including activities and skills from art, language arts, mathematics, music, science,…

  20. PROJECT SUCCESS: Art. (Introductory Packet, Drawing, Claywork, Painting).

    ERIC Educational Resources Information Center

    Petersen, Nancy

    Four packets comprise the art component of an enrichment program for gifted elementary students. The introduction packet reviews identification of children gifted in art through pre and post measures. A drawing packet reviews techniques for such activities as human figure drawing, shading, crayon rubbinqs, experimenting with perspective, and…

  1. Quadruple Lap Shear Processing Evaluation

    NASA Technical Reports Server (NTRS)

    Thornton, Tony N.; McCool, A. (Technical Monitor)

    2000-01-01

    The Thiokol, Science and Engineering Huntsville Operations (SEHO) Laboratory has previously experienced significant levels of variation in testing Quadruple Lap Shear (QLS) specimens. The QLS test is used at Thiokol / Utah for the qualification of Reusable Solid Rocket Motor (RSRM) nozzle flex bearing materials. A test was conducted to verify that process changes instituted by SEHO personnel effectively reduced variability, even with normal processing variables introduced. A test matrix was designed to progress in a series of steps; the first establishing a baseline, then introducing additional solvents or other variables. Variables included normal test plan delay times, pre-bond solvent hand-wipes and contaminants. Each condition tested utilized standard QLS hardware bonded with natural rubber, two separate technicians and three replicates. This paper will report the results and conclusions of this investigation.

  2. New Teachers Packet.

    ERIC Educational Resources Information Center

    Journalism Education Association.

    This packet of information for new scholastic journalism teachers (or advisers) compiles information on professional associations in journalism education, offers curriculum guides and general help, and contains worksheets and handouts. Sections of the packet are: (1) Professional Help (Journalism Education Association Information, and Other…

  3. Radiology/Imaging. Clinical Rotation. Instructor's Packet and Student Study Packet.

    ERIC Educational Resources Information Center

    Texas Univ., Austin. Extension Instruction and Materials Center.

    The instructor's packet, the first of two packets, is one of a series of materials designed to help students who are investigating the activities within a radiology department or considering any of the imaging technologies as a career. The material is designed to relate training experience to information studied in the classroom. This packet…

  4. LAPS Grid generation and adaptation

    NASA Astrophysics Data System (ADS)

    Pagliantini, Cecilia; Delzanno, Gia Luca; Guo, Zehua; Srinivasan, Bhuvana; Tang, Xianzhu; Chacon, Luis

    2011-10-01

    LAPS uses a common-data framework in which a general purpose grid generation and adaptation package in toroidal and simply connected domains is implemented. The initial focus is on implementing the Winslow/Laplace-Beltrami method for generating non-overlapping block structured grids. This is to be followed by a grid adaptation scheme based on Monge-Kantorovich optimal transport method [Delzanno et al., J. Comput. Phys,227 (2008), 9841-9864], that equidistributes application-specified error. As an initial set of applications, we will lay out grids for an axisymmetric mirror, a field reversed configuration, and an entire poloidal cross section of a tokamak plasma reconstructed from a CMOD experimental shot. These grids will then be used for computing the plasma equilibrium and transport in accompanying presentations. A key issue for Monge-Kantorovich grid optimization is the choice of error or monitor function for equi-distribution. We will compare the Operator Recovery Error Source Detector (ORESD) [Lapenta, Int. J. Num. Meth. Eng,59 (2004) 2065-2087], the Tau method and a strategy based on the grid coarsening [Zhang et al., AIAA J,39 (2001) 1706-1715] to find an ``optimal'' grid. Work supported by DOE OFES.

  5. 20th Century Fashions. Teacher Edition. Marketing Education LAPs.

    ERIC Educational Resources Information Center

    Hawley, Jana

    This learning activity packet is designed to help students to acquire a competency: how to use an understanding of fashion history in preparation for a career in the fashion industry. The unit consists of the competency, three objectives, suggested learning activity, transparency masters, and a pretest/posttest with answer keys. The activity is a…

  6. Careers in Fashion. Teacher Edition. Marketing Education LAPs.

    ERIC Educational Resources Information Center

    Hawley, Jana

    This learning activity packet is designed to help students to acquire a competency, namely: how to use knowledge of careers in the fashion industry to gain information about their career choices. The unit consists of the competency, three objectives, suggested learning activities, transparency masters, handout materials for activities, and a…

  7. Selective expression of latency-associated peptide (LAP) and IL-1 receptor type I/II (CD121a/CD121b) on activated human FOXP3+ regulatory T cells allows for their purification from expansion cultures

    PubMed Central

    Andersson, John; Hardwick, Donna; Bebris, Lolita; Illei, Gabor G.

    2009-01-01

    Although adoptive transfer of regulatory T cells (Foxp3+ Tregs) has proven to be efficacious in the prevention and treatment of autoimmune diseases and graft-versus-host disease in rodents, a major obstacle for the use of Treg immunotherapy in humans is the difficulty of obtaining a highly purified preparation after ex vivo expansion. We have identified latency-associated peptide (LAP) and IL-1 receptor type I and II (CD121a/CD121b) as unique cell-surface markers that distinguish activated Tregs from activated FOXP3− and FOXP3+ non-Tregs. We show that it is feasible to sort expanded FOXP3+ Tregs from non-Tregs with the use of techniques for magnetic bead cell separation based on expression of these 3 markers. After separation, the final product contains greater than 90% fully functional FOXP3+ Tregs. This novel protocol should facilitate the purification of Tregs for both cell-based therapies as well as detailed studies of human Treg function in health and disease. PMID:19299332

  8. The Structure and Enzyme Characteristics of a Recombinant Leucine Aminopeptidase rLap1 from Aspergillus sojae and Its Application in Debittering.

    PubMed

    Huang, Wei-Qian; Zhong, Li-Fen; Meng, Zhi-Zhong; You, Zi-Juan; Li, Jia-Zhou; Luo, Xiao-Chun

    2015-09-01

    A leucine aminopeptidase Lap1 was cloned from Aspergillus sojae GIM3.30. The truncated Lap1 without a signal peptide was over-expressed in P. pastoris, and the enzymatic characteristics of recombinant Lap1 (rLap1) were tested. The rLap1 was about 36.7 kDa with an optimal pH 8.0 and optimal temperature 50 °C for substrate Leu-p-nitroanilide and it sustained 50 % activity after 1 h incubation at 50 °C. The activity of rLap1 was significantly inhibited by EDTA, whereas Co(2+), Mn(2+), and Ca(2+) ions, but not Zn(2+) ions, restored its activity. rLap1 showed the highest activity against Arg-pNA and then Leu-, Lys-, Met-, and Phe-pNA. The 3D structure of rLap1 showed it had a conserved functional charge/dipole complex and a hydrogen bond network of Zn2-D179-S228-Q177-D229-S158 around its active center. An acidic Asp residue was found at the bottom of the substrate binding pocket, which explains its preference for basic N-terminal amino acid substrates such as Arg and Lys. rLap1 improved the degree of hydrolysis of casein and soy protein hydrolysates and also decreased their bitterness, indicating its potential utility in food production.

  9. 49 CFR 230.30 - Lap-joint seam boilers.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ..., DEPARTMENT OF TRANSPORTATION STEAM LOCOMOTIVE INSPECTION AND MAINTENANCE STANDARDS Boilers and Appurtenances Inspection and Repair § 230.30 Lap-joint seam boilers. Every boiler having lap-joint longitudinal seams... 49 Transportation 4 2013-10-01 2013-10-01 false Lap-joint seam boilers. 230.30 Section...

  10. 49 CFR 230.30 - Lap-joint seam boilers.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ..., DEPARTMENT OF TRANSPORTATION STEAM LOCOMOTIVE INSPECTION AND MAINTENANCE STANDARDS Boilers and Appurtenances Inspection and Repair § 230.30 Lap-joint seam boilers. Every boiler having lap-joint longitudinal seams... 49 Transportation 4 2014-10-01 2014-10-01 false Lap-joint seam boilers. 230.30 Section...

  11. 49 CFR 230.30 - Lap-joint seam boilers.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ..., DEPARTMENT OF TRANSPORTATION STEAM LOCOMOTIVE INSPECTION AND MAINTENANCE STANDARDS Boilers and Appurtenances Inspection and Repair § 230.30 Lap-joint seam boilers. Every boiler having lap-joint longitudinal seams... 49 Transportation 4 2012-10-01 2012-10-01 false Lap-joint seam boilers. 230.30 Section...

  12. 49 CFR 230.30 - Lap-joint seam boilers.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ..., DEPARTMENT OF TRANSPORTATION STEAM LOCOMOTIVE INSPECTION AND MAINTENANCE STANDARDS Boilers and Appurtenances Inspection and Repair § 230.30 Lap-joint seam boilers. Every boiler having lap-joint longitudinal seams... 49 Transportation 4 2011-10-01 2011-10-01 false Lap-joint seam boilers. 230.30 Section...

  13. 49 CFR 230.30 - Lap-joint seam boilers.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ..., DEPARTMENT OF TRANSPORTATION STEAM LOCOMOTIVE INSPECTION AND MAINTENANCE STANDARDS Boilers and Appurtenances Inspection and Repair § 230.30 Lap-joint seam boilers. Every boiler having lap-joint longitudinal seams... 49 Transportation 4 2010-10-01 2010-10-01 false Lap-joint seam boilers. 230.30 Section...

  14. Photoelectron circular dichroism in the multiphoton ionization by short laser pulses. I. Propagation of single-active-electron wave packets in chiral pseudo-potentials

    SciTech Connect

    Artemyev, Anton N.; Müller, Anne D.; Demekhin, Philipp V.; Hochstuhl, David

    2015-06-28

    A theoretical method to study the angle-resolved multiphoton ionization of polyatomic molecules is developed. It is based on the time-dependent formulation of the Single Center (TDSC) method and consists in the propagation of single-active-electron wave packets in the effective molecular potentials in the presence of intense laser pulses. For this purpose, the time-dependent Schrödinger equation for one electron, moving in a molecular field and interacting with an arbitrary laser pulse, is solved in spherical coordinates by an efficient numerical approach. As a test, the method is applied to the one- and two-photon ionizations of a model methane-like chiral system by circularly polarized short intense high-frequency laser pulses. Thereby, we analyze the photoelectron circular dichroism (PECD) in the momentum distribution. The considered model application illustrates the capability of the TDSC method to study multiphoton PECD in fixed-in-space and randomly oriented chiral molecules.

  15. Quantum wave packet revivals

    NASA Astrophysics Data System (ADS)

    Robinett, R. W.

    2004-03-01

    The numerical prediction, theoretical analysis, and experimental verification of the phenomenon of wave packet revivals in quantum systems has flourished over the last decade and a half. Quantum revivals are characterized by initially localized quantum states which have a short-term, quasi-classical time evolution, which then can spread significantly over several orbits, only to reform later in the form of a quantum revival in which the spreading reverses itself, the wave packet relocalizes, and the semi-classical periodicity is once again evident. Relocalization of the initial wave packet into a number of smaller copies of the initial packet (‘minipackets’ or ‘clones’) is also possible, giving rise to fractional revivals. Systems exhibiting such behavior are a fundamental realization of time-dependent interference phenomena for bound states with quantized energies in quantum mechanics and are therefore of wide interest in the physics and chemistry communities. We review the theoretical machinery of quantum wave packet construction leading to the existence of revivals and fractional revivals, in systems with one (or more) quantum number(s), as well as discussing how information on the classical period and revival time is encoded in the energy eigenvalue spectrum. We discuss a number of one-dimensional model systems which exhibit revival behavior, including the infinite well, the quantum bouncer, and others, as well as several two-dimensional integrable quantum billiard systems. Finally, we briefly review the experimental evidence for wave packet revivals in atomic, molecular, and other systems, and related revival phenomena in condensed matter and optical systems.

  16. Thermal shock testing of lapped optical glass

    NASA Astrophysics Data System (ADS)

    Zhang, Yingrui; Wu, Yuansun; Liu, Han; Lambropoulos, John C.

    2007-09-01

    We have measured and modeled the thermal shock fracture of the commercially available BK-7 borosilicate crown optical glass as a function of surface finish prior to thermal shock testing. For surfaces lapped with alumina abrasives in the range 5 μm to 40 μm, the critical temperature drop for fracture in thin disk samples increases with diminishing abrasive size, and changes from 123.7+/-1.1 °C (for surfaces lapped with 40 μm abrasives) to 140.2+/-2.8 °C (for surfaces lapped with 5 μm abrasives.) We correlate the measured thermal shock (critical) temperature drop with the glass thermal and mechanical properties, including the fracture toughness, and the depth of surface cracks induced by the lapping process. We distinguish between "severe" and "mild" thermal shock conditions in terms of the applicable heat transfer coefficient and Biot number. We estimate that the depth of the strength controlling cracks on the edge of the disk samples was about 55-70 μm.

  17. Hoover Dam Learning Packet.

    ERIC Educational Resources Information Center

    Bureau of Reclamation (Dept. of Interior), Washington, DC.

    This learning packet provides background information about Hoover Dam (Nevada) and the surrounding area. Since the dam was built at the height of the Depression in 1931, people came from all over the country to work on it. Because of Hoover Dam, the Colorado River was controlled for the first time in history and farmers in Nevada, California, and…

  18. PROGRAMMED LEARNING PACKET.

    ERIC Educational Resources Information Center

    Modern Language Association of America, New York, NY.

    MATERIALS CONCERNING PROGRAMED INSTRUCTION IN FOREIGN LANGUAGES, PUBLISHED FROM 1960 TO 1967, ARE COLLECTED IN THIS PACKET FOR LANGUAGE TEACHERS AND PERSONS INTERESTED IN THE FUTURE USES OF THE LANGUAGE LABORATORY. INCLUDED ARE--(1) "PROGRAMED LEARNING OF A SECOND LANGUAGE" BY HARLAN LANE, (2) "A PRIMER OF PROGRAMED INSTRUCTION IN FOREIGN LANGUAGE…

  19. Amelia Earhart Learning Packet.

    ERIC Educational Resources Information Center

    Civil Air Patrol, Maxwell AFB, AL.

    The feats of individuals who have made history in the aerospace world are often misunderstood and soon ignored or forgotten after the first notoriety has been achieved. Amelia Earhart was selected as the subject for this learning packet because of her brilliant accomplishments on the world of flight, a persistent desire to determine what really…

  20. Peninsula Humane Society Teacher's Packet. Secondary Level.

    ERIC Educational Resources Information Center

    Peninsula Humane Society, San Mateo, CA.

    Activities in this teacher's packet are designed to familiarize secondary school students with the responsibilities involved in pet ownership. Teaching plans are provided for a total of 12 lessons grouped under social studies, language arts, math, and health sciences. Activities focus on pet overpopulation, expressions of social responses in…

  1. Learn about Seabirds. Teaching Packet, Grades 4-6.

    ERIC Educational Resources Information Center

    Fish and Wildlife Service (Dept. of Interior), Anchorage, AK.

    This teaching packet is designed to teach Alaskan students in grades 4-6 about Alaska's seabird populations, the worldwide significance of seabirds, and the environmental conditions to which seabirds are sensitive. The packet includes a curriculum guide (containing a teacher's background story and 12 teaching activities), a separately published…

  2. Large-scale Advanced Propfan (LAP) program

    NASA Technical Reports Server (NTRS)

    Sagerser, D. A.; Ludemann, S. G.

    1985-01-01

    The propfan is an advanced propeller concept which maintains the high efficiencies traditionally associated with conventional propellers at the higher aircraft cruise speeds associated with jet transports. The large-scale advanced propfan (LAP) program extends the research done on 2 ft diameter propfan models to a 9 ft diameter article. The program includes design, fabrication, and testing of both an eight bladed, 9 ft diameter propfan, designated SR-7L, and a 2 ft diameter aeroelastically scaled model, SR-7A. The LAP program is complemented by the propfan test assessment (PTA) program, which takes the large-scale propfan and mates it with a gas generator and gearbox to form a propfan propulsion system and then flight tests this system on the wing of a Gulfstream 2 testbed aircraft.

  3. Analysis of lap times in international swimming competitions.

    PubMed

    Robertson, Eileen; Pyne, David; Hopkins, Will; Anson, Judith

    2009-02-15

    Swimming performances were analysed for the top 16 finishers (semi-finalists, finalists) in nine international competitions over a 7-year period (1530 males, 1527 female). Total race time and intermediate lap times were log-transformed and analysed for effects of sex (male, female), stroke (freestyle, form strokes, individual medley), event (100, 200, and 400 m), and place (1-16). Between-athlete correlations characterized the relationship of each lap to final time, and within-athlete estimates quantified the effect of lap time on improvements in final time. Finalists exhibited very large correlations (r = 0.7-0.9) with final time in the second 50-m lap of 100-m events and the middle two 50-m and 100-m laps of 200-m and 400-m events respectively. For an individual swimmer, an achievable change in lap time was associated with an approximate 0.4-0.8% improvement in final time for finalists and an approximate 0.5-1.1% improvement in final time for semi-finalists, depending on sex, stroke, and event. The pattern of lap times was similar for the top 16 swimmers and between the best and worst swims for finalists. These findings indicate that substantial improvements can be made via the final lap in sprints and the middle two laps of 200- to 400-m events, but the overall pattern of lap times should not be changed. PMID:19214862

  4. Homologs of the LapD-LapG c-di-GMP Effector System Control Biofilm Formation by Bordetella bronchiseptica.

    PubMed

    Ambrosis, Nicolás; Boyd, Chelsea D; O Toole, George A; Fernández, Julieta; Sisti, Federico

    2016-01-01

    Biofilm formation is important for infection by many pathogens. Bordetella bronchiseptica causes respiratory tract infections in mammals and forms biofilm structures in nasal epithelium of infected mice. We previously demonstrated that cyclic di-GMP is involved in biofilm formation in B. bronchiseptica. In the present work, based on their previously reported function in Pseudomonas fluorescens, we identified three genes in the B. bronchiseptica genome likely involved in c-di-GMP-dependent biofilm formation: brtA, lapD and lapG. Genetic analysis confirmed a role for BrtA, LapD and LapG in biofilm formation using microtiter plate assays, as well as scanning electron and fluorescent microscopy to analyze the phenotypes of mutants lacking these proteins. In vitro and in vivo studies showed that the protease LapG of B. bronchiseptica cleaves the N-terminal domain of BrtA, as well as the LapA protein of P. fluorescens, indicating functional conservation between these species. Furthermore, while BrtA and LapG appear to have little or no impact on colonization in a mouse model of infection, a B. bronchiseptica strain lacking the LapG protease has a significantly higher rate of inducing a severe disease outcome compared to the wild type. These findings support a role for c-di-GMP acting through BrtA/LapD/LapG to modulate biofilm formation, as well as impact pathogenesis, by B. bronchiseptica. PMID:27380521

  5. Homologs of the LapD-LapG c-di-GMP Effector System Control Biofilm Formation by Bordetella bronchiseptica

    PubMed Central

    Ambrosis, Nicolás; Boyd, Chelsea D.; O´Toole, George A.; Fernández, Julieta; Sisti, Federico

    2016-01-01

    Biofilm formation is important for infection by many pathogens. Bordetella bronchiseptica causes respiratory tract infections in mammals and forms biofilm structures in nasal epithelium of infected mice. We previously demonstrated that cyclic di-GMP is involved in biofilm formation in B. bronchiseptica. In the present work, based on their previously reported function in Pseudomonas fluorescens, we identified three genes in the B. bronchiseptica genome likely involved in c-di-GMP-dependent biofilm formation: brtA, lapD and lapG. Genetic analysis confirmed a role for BrtA, LapD and LapG in biofilm formation using microtiter plate assays, as well as scanning electron and fluorescent microscopy to analyze the phenotypes of mutants lacking these proteins. In vitro and in vivo studies showed that the protease LapG of B. bronchiseptica cleaves the N-terminal domain of BrtA, as well as the LapA protein of P. fluorescens, indicating functional conservation between these species. Furthermore, while BrtA and LapG appear to have little or no impact on colonization in a mouse model of infection, a B. bronchiseptica strain lacking the LapG protease has a significantly higher rate of inducing a severe disease outcome compared to the wild type. These findings support a role for c-di-GMP acting through BrtA/LapD/LapG to modulate biofilm formation, as well as impact pathogenesis, by B. bronchiseptica PMID:27380521

  6. Homologs of the LapD-LapG c-di-GMP Effector System Control Biofilm Formation by Bordetella bronchiseptica.

    PubMed

    Ambrosis, Nicolás; Boyd, Chelsea D; O Toole, George A; Fernández, Julieta; Sisti, Federico

    2016-01-01

    Biofilm formation is important for infection by many pathogens. Bordetella bronchiseptica causes respiratory tract infections in mammals and forms biofilm structures in nasal epithelium of infected mice. We previously demonstrated that cyclic di-GMP is involved in biofilm formation in B. bronchiseptica. In the present work, based on their previously reported function in Pseudomonas fluorescens, we identified three genes in the B. bronchiseptica genome likely involved in c-di-GMP-dependent biofilm formation: brtA, lapD and lapG. Genetic analysis confirmed a role for BrtA, LapD and LapG in biofilm formation using microtiter plate assays, as well as scanning electron and fluorescent microscopy to analyze the phenotypes of mutants lacking these proteins. In vitro and in vivo studies showed that the protease LapG of B. bronchiseptica cleaves the N-terminal domain of BrtA, as well as the LapA protein of P. fluorescens, indicating functional conservation between these species. Furthermore, while BrtA and LapG appear to have little or no impact on colonization in a mouse model of infection, a B. bronchiseptica strain lacking the LapG protease has a significantly higher rate of inducing a severe disease outcome compared to the wild type. These findings support a role for c-di-GMP acting through BrtA/LapD/LapG to modulate biofilm formation, as well as impact pathogenesis, by B. bronchiseptica.

  7. Fis overexpression enhances Pseudomonas putida biofilm formation by regulating the ratio of LapA and LapF.

    PubMed

    Moor, Hanna; Teppo, Annika; Lahesaare, Andrio; Kivisaar, Maia; Teras, Riho

    2014-12-01

    Bacteria form biofilm as a response to a number of environmental signals that are mediated by global transcription regulators and alarmones. Here we report the involvement of the global transcription regulator Fis in Pseudomonas putida biofilm formation through regulation of lapA and lapF genes. The major component of P. putida biofilm is proteinaceous and two large adhesive proteins, LapA and LapF, are known to play a key role in its formation. We have previously shown that Fis overexpression enhances P. putida biofilm formation. In this study, we used mini-Tn5 transposon mutagenesis to select potential Fis-regulated genes involved in biofilm formation. A total of 90 % of the studied transposon mutants carried insertions in the lap genes. Since our experiments showed that Fis-enhanced biofilm is mostly proteinaceous, the amounts of LapA and LapF from P. putida cells lysates were quantified using SDS-PAGE. Fis overexpression increases the quantity of LapA 1.6 times and decreases the amount of LapF at least 4 times compared to the wild-type cells. The increased LapA expression caused by Fis overexpression was confirmed by FACS analysis measuring the amount of LapA-GFP fusion protein. Our results suggest that the profusion of LapA in the Fis-overexpressed cells causes enhanced biofilm formation in mature stages of P. putida biofilm and LapF has a minor role in P. putida biofilm formation.

  8. Systematic Construction of Real Lapped Tight Frame Transforms

    PubMed Central

    Sandryhaila, Aliaksei; Chebira, Amina; Milo, Christina; Kovčcević, Jelena; Püschel, Markus

    2010-01-01

    We present a constructive algorithm for the design of real lapped equal-norm tight frame transforms. These transforms can be efficiently implemented through filter banks and have recently been proposed as a redundant counterpart to lapped orthogonal transforms, as well as an infinite-dimensional counterpart to harmonic tight frames. The proposed construction consists of two parts: First, we design a large class of new real lapped orthogonal transforms derived from submatrices of the discrete Fourier transform. Then, we seed these to obtain real lapped tight frame transforms corresponding to tight, equal-norm frames. We identify those frames that are maximally robust to erasures, and show that our construction leads to a large class of new lapped orthogonal transforms as well as new lapped tight frame transforms. PMID:20607116

  9. Dogs lap using acceleration-driven open pumping

    PubMed Central

    Gart, Sean; Socha, John J.; Vlachos, Pavlos P.; Jung, Sunghwan

    2015-01-01

    Dogs lap because they have incomplete cheeks and cannot suck. When lapping, a dog’s tongue pulls a liquid column from the bath, suggesting that the hydrodynamics of column formation are critical to understanding how dogs drink. We measured lapping in 19 dogs and used the results to generate a physical model of the tongue’s interaction with the air–fluid interface. These experiments help to explain how dogs exploit the fluid dynamics of the generated column. The results demonstrate that effects of acceleration govern lapping frequency, which suggests that dogs curl the tongue to create a larger liquid column. Comparing lapping in dogs and cats reveals that, despite similar morphology, these carnivores lap in different physical regimes: an unsteady inertial regime for dogs and steady inertial regime for cats. PMID:26668382

  10. Dogs lap using acceleration-driven open pumping.

    PubMed

    Gart, Sean; Socha, John J; Vlachos, Pavlos P; Jung, Sunghwan

    2015-12-29

    Dogs lap because they have incomplete cheeks and cannot suck. When lapping, a dog's tongue pulls a liquid column from the bath, suggesting that the hydrodynamics of column formation are critical to understanding how dogs drink. We measured lapping in 19 dogs and used the results to generate a physical model of the tongue's interaction with the air-fluid interface. These experiments help to explain how dogs exploit the fluid dynamics of the generated column. The results demonstrate that effects of acceleration govern lapping frequency, which suggests that dogs curl the tongue to create a larger liquid column. Comparing lapping in dogs and cats reveals that, despite similar morphology, these carnivores lap in different physical regimes: an unsteady inertial regime for dogs and steady inertial regime for cats.

  11. Elementary Environmental Learning Packet Grades 4-6, Third Revised Edition. [Intermediate CEL Blocks, Student Activity Cards].

    ERIC Educational Resources Information Center

    Brevard County School Board, Cocoa, FL.

    This environmental education program consists of two levels: primary and intermediate. The learning materials are activity based and incorporate process and subject area skills with knowledge and concern for the environment. The program is also interdisciplinary including activities and skills from several areas. The materials in this set for…

  12. Wireless Avionics Packet to Support Fault Tolerance for Flight Applications

    NASA Technical Reports Server (NTRS)

    Block, Gary L.; Whitaker, William D.; Dillon, James W.; Lux, James P.; Ahmad, Mohammad

    2009-01-01

    , and the local ADI number. The destination ADI is used to route the packet to its ultimate destination. At each hop, the sending interface uses the destination address to determine the next node for the data. The sending node is the node address of the interface that is broadcasting the packet. This field is used to determine the health of the subsystem that is sending the packet. In the case of a packet that traverses several intermediate nodes, it may be the node address of the intermediate node. The target node is the node address of the next hop for the packet. It may be an intermediate node, or the final destination for the packet. The sequence number is used to identify duplicate packets. Because each interface has multiple transceivers, the same packet will appear at both receivers. The sequence number allows the interface to correlate the reception and forward a single, unique packet for additional processing. The subnet field allows data traffic to be partitioned into segregated local networks to support large networks while keeping each subnet at a manageable size. This also keeps the routing table small enough so routing can be done by a simple table lookup in an FPGA device. The subsystem class identifies members of a set of redundant subsystems, and, in a hot standby configuration, all members of the subsystem class will receive the data packets. Only the active subsystem will generate data traffic. Specific units in a class of redundant units can be identified and, if the hot standby configuration is not used, packets will be directed to a specific subsystem unit.

  13. Packet Daemon Version 12(SOPHIA)

    SciTech Connect

    2012-08-09

    Packet Daemon Version 12 is the code exclusively used by the ‘packetd’ executable. It provides packet data to the OglNet Version 12 visualization tool. It reads PCAP data and sends an abstraction of the packets to the ‘oglnet’ executable for display. ‘packetd’will run as a service on a Linux host thereby capturing data continuously and make that data available for ‘oglnet’ whenever it connects to the service.

  14. Controlled Quantum Packets

    NASA Technical Reports Server (NTRS)

    DeMartino, Salvatore; DeSiena, Silvio

    1996-01-01

    We look at time evolution of a physical system from the point of view of dynamical control theory. Normally we solve motion equation with a given external potential and we obtain time evolution. Standard examples are the trajectories in classical mechanics or the wave functions in Quantum Mechanics. In the control theory, we have the configurational variables of a physical system, we choose a velocity field and with a suited strategy we force the physical system to have a well defined evolution. The evolution of the system is the 'premium' that the controller receives if he has adopted the right strategy. The strategy is given by well suited laboratory devices. The control mechanisms are in many cases non linear; it is necessary, namely, a feedback mechanism to retain in time the selected evolution. Our aim is to introduce a scheme to obtain Quantum wave packets by control theory. The program is to choose the characteristics of a packet, that is, the equation of evolution for its centre and a controlled dispersion, and to give a building scheme from some initial state (for example a solution of stationary Schroedinger equation). It seems natural in this view to use stochastic approach to Quantum Mechanics, that is, Stochastic Mechanics [S.M.]. It is a quantization scheme different from ordinary ones only formally. This approach introduces in quantum theory the whole mathematical apparatus of stochastic control theory. Stochastic Mechanics, in our view, is more intuitive when we want to study all the classical-like problems. We apply our scheme to build two classes of quantum packets both derived generalizing some properties of coherent states.

  15. Charles A. Lindbergh Learning Packet.

    ERIC Educational Resources Information Center

    Rodriguez, Charley

    This aerospace education learning packet contains information about the famous pilot, Charles A. Lindbergh. Posters, recommended teaching methods, tests with keys, and task cards are also included. (KHR)

  16. Learning packets in nursing education: reviving the past.

    PubMed

    Xu, Yin; Martin, Madeleine; Gribbins, Ashley

    2010-05-01

    Learning packets gained popularity in nursing education in the 1960's. Recently, they have been cited as strategies for distance learning. The aim of this project was to integrate Topic Focused Learning Packets as a complementary teaching strategy for presentation of new content to large classes of undergraduate nursing students. In addition to reducing in-class content presentation time, goals included: fostering critical thinking, actively engaging the student, and providing opportunities for team-based interaction. Rationale, design process and packets will be described. The learning packet was viewed positively by the students and faculty. Among 134 students, 119 strongly agreed or agreed that the learning packet was effective in increasing their understanding of the content and achieving the course objectives.

  17. Analysis of adhesively bonded composite lap joints

    SciTech Connect

    Tong, L.; Kuruppu, M.; Kelly, D.

    1994-12-31

    A new nonlinear formulation is developed for the governing equations for the shear and peel stresses in adhesively bonded composite double lap joints. The new formulation allows arbitrary nonlinear stress-strain characteristics in both shear and peel behavior. The equations are numerically integrated using a shooting technique and Newton-Raphson method behind a user friendly interface. The failure loads are predicted by utilizing the maximum stress criterion, interlaminar delamination and the energy density failure criteria. Numerical examples are presented to demonstrate the effect of the nonlinear adhesive behavior on the stress distribution and predict the failure load and the associated mode.

  18. Diamond machine tool face lapping machine

    DOEpatents

    Yetter, H.H.

    1985-05-06

    An apparatus for shaping, sharpening and polishing diamond-tipped single-point machine tools. The isolation of a rotating grinding wheel from its driving apparatus using an air bearing and causing the tool to be shaped, polished or sharpened to be moved across the surface of the grinding wheel so that it does not remain at one radius for more than a single rotation of the grinding wheel has been found to readily result in machine tools of a quality which can only be obtained by the most tedious and costly processing procedures, and previously unattainable by simple lapping techniques.

  19. Separated Fringe Packet Binaries

    NASA Astrophysics Data System (ADS)

    Bagnuolo, W. G.; Taylor, S. F.; McAlister, H. A.; ten Brummelaar, T.; Sturmann, L.; Sturmann, J.; Turner, N. H.; Berger, D.; Ridgway, S. T.; CenterHigh Angular Resolution Astronomy (CHARA)

    2004-12-01

    Individually resolved packets are produced by scans from the CHARA Interferometer Array for binary stars with separations from 10 to 100 milli-arcsec (mas) in the K' band. We have used this data for astrometry of the binary with the goal of improving the visual orbits for these systems. About 12 data sets of 400 scans each can be collected for a star within an hour. The intrinsic accuracy with simple linear/quadratic fits to the time-separation curve yields accuracies of 0.15 mas. But, for systems with separations less than 80 mas, the measured separation is modulated periodically by the secondary star's packet riding over the sidelobes of the primary which provides a phase reference. This "sidelobe verniering" can improve the precision to better than 50 micro-arcsec. These techniques, represents 1-2 orders of magnitude improvement in astrometic accuracy over speckle interferometry techniques. Visual orbits can then be refined via a maximum liklihood technique, which leads to revisions in the stellar masses. We present the results for several binaries that have been observed at the CHARA Array, starting in 2001.

  20. On quantization of nondispersive wave packets

    SciTech Connect

    Altaisky, M. V.

    2013-10-15

    Nondispersive wave packets are widely used in optics and acoustics. We found it interesting that such packets could be also a subject of quantum field theory. Canonical commutation relations for the nondispersive wave packets are constructed.

  1. How dogs lap: open pumping driven by acceleration

    NASA Astrophysics Data System (ADS)

    Gart, Sean; Socha, John; Vlachos, Pavlos; Jung, Sunghwan

    2015-11-01

    Dogs drink by lapping because they have incomplete cheeks and cannot suck fluids into the mouth. When lapping, a dog's tongue pulls a liquid column from a bath, which is then swallowed, suggesting that the hydrodynamics of column formation are critical to understanding how dogs drink. We measured the kinematics of lapping from nineteen dogs and used the results to generate a physical model of the tongue's interaction with the air-fluid interface. These experiments with an accelerating rod help to explain how dogs exploit the fluid dynamics of the generated column. The results suggest that effects of acceleration govern lapping frequency, and that dogs curl the tongue ventrally (backwards) and time their bite on the column to increase fluid intake per lap. Comparing lapping in dogs and cats reveals that though they both lap with the same frequency scaling with respect to body mass and have similar morphology, these carnivores lap in different physical regimes: a high-acceleration regime for dogs and a low-acceleration regime for cats.

  2. Experience with the EURECA Packet Telemetry and Packet Telecommand system

    NASA Technical Reports Server (NTRS)

    Sorensen, Erik Mose; Ferri, Paolo

    1994-01-01

    The European Retrieval Carrier (EURECA) was launched on its first flight on the 31st of July 1992 and retrieved on the 29th of June 1993. EURECA is characterized by several new on-board features, most notably Packet telemetry, and a partial implementation of packet telecommanding, the first ESA packetised spacecraft. Today more than one year after the retrieval the data from the EURECA mission has to a large extent been analysed and we can present some of the interesting results. This paper concentrates on the implementation and operational experience with the EURECA Packet Telemetry and Packet Telecommanding. We already discovered during the design of the ground system that the use of packet telemetry has major impact on the overall design and that processing of packet telemetry may have significant effect on the computer loading and sizing. During the mission a number of problems were identified with the on-board implementation resulting in very strange anomalous behaviors. Many of these problems directly violated basic assumptions for the design of the ground segment adding to the strange behavior. The paper shows that the design of a telemetry packet system should be flexible enough to allow a rapid configuration of the telemetry processing in order to adapt it to the new situation in case of an on-board failure. The experience gained with the EURECA mission control should be used to improve ground systems for future missions.

  3. Identification of a Novel Human LAP1 Isoform That Is Regulated by Protein Phosphorylation

    PubMed Central

    Santos, Mariana; Domingues, Sara C.; Costa, Patrícia; Muller, Thorsten; Galozzi, Sara; Marcus, Katrin; da Cruz e Silva, Edgar F.; da Cruz e Silva, Odete A.; Rebelo, Sandra

    2014-01-01

    Lamina associated polypeptide 1 (LAP1) is an integral protein of the inner nuclear membrane that is ubiquitously expressed. LAP1 binds to lamins and chromatin, probably contributing to the maintenance of the nuclear envelope architecture. Moreover, LAP1 also interacts with torsinA and emerin, proteins involved in DYT1 dystonia and X-linked Emery-Dreifuss muscular dystrophy disorder, respectively. Given its relevance to human pathological conditions, it is important to better understand the functional diversity of LAP1 proteins. In rat, the LAP1 gene (TOR1AIP1) undergoes alternative splicing to originate three LAP1 isoforms (LAP1A, B and C). However, it remains unclear if the same occurs with the human TOR1AIP1 gene, since only the LAP1B isoform had thus far been identified in human cells. In silico analysis suggested that, across different species, potential new LAP1 isoforms could be generated by alternative splicing. Using shRNA to induce LAP1 knockdown and HPLC-mass spectrometry analysis the presence of two isoforms in human cells was described and validated: LAP1B and LAP1C; the latter is putatively N-terminal truncated. LAP1B and LAP1C expression profiles appear to be dependent on the specific tissues analyzed and in cultured cells LAP1C was the major isoform detected. Moreover, LAP1B and LAP1C expression increased during neuronal maturation, suggesting that LAP1 is relevant in this process. Both isoforms were found to be post-translationally modified by phosphorylation and methionine oxidation and two LAP1B/LAP1C residues were shown to be dephosphorylated by PP1. This study permitted the identification of the novel human LAP1C isoform and partially unraveled the molecular basis of LAP1 regulation. PMID:25461922

  4. Tubular lap joints for wind turbine applications

    SciTech Connect

    Reedy, E.D. Jr.; Guess, T.R.

    1990-01-01

    A combined analytical/experimental study of the strength of thick- walled, adhesively bonded PMMA-to-aluminum and E-glass/epoxy composite-to-aluminum tubular lap joints under axial load has been conducted. Test results include strength and failure mode data. Moreover, strain gages placed along the length of the outer tubular adherend characterize load transfer from one adherend to the other. The strain gage data indicate that load transfer is nonuniform and that the relatively compliant PMMA has the shorter load transfer length. Strains determined by a finite element analysis of the tested joints are in excellent agreement with those measured. Calculated bond stresses are highest in the region of observed failure, and extensive bond yielding is predicted in the E- glass/epoxy composite-to-aluminum joint prior to joint failure. 4 refs., 13 figs., 1 tab.

  5. High speed packet switching

    NASA Technical Reports Server (NTRS)

    1991-01-01

    This document constitutes the final report prepared by Proteon, Inc. of Westborough, Massachusetts under contract NAS 5-30629 entitled High-Speed Packet Switching (SBIR 87-1, Phase 2) prepared for NASA-Greenbelt, Maryland. The primary goal of this research project is to use the results of the SBIR Phase 1 effort to develop a sound, expandable hardware and software router architecture capable of forwarding 25,000 packets per second through the router and passing 300 megabits per second on the router's internal busses. The work being delivered under this contract received its funding from three different sources: the SNIPE/RIG contract (Contract Number F30602-89-C-0014, CDRL Sequence Number A002), the SBIR contract, and Proteon. The SNIPE/RIG and SBIR contracts had many overlapping requirements, which allowed the research done under SNIPE/RIG to be applied to SBIR. Proteon funded all of the work to develop new router interfaces other than FDDI, in addition to funding the productization of the router itself. The router being delivered under SBIR will be a fully product-quality machine. The work done during this contract produced many significant findings and results, summarized here and explained in detail in later sections of this report. The SNIPE/RIG contract was completed. That contract had many overlapping requirements with the SBIR contract, and resulted in the successful demonstration and delivery of a high speed router. The development that took place during the SNIPE/RIG contract produced findings that included the choice of processor and an understanding of the issues surrounding inter processor communications in a multiprocessor environment. Many significant speed enhancements to the router software were made during that time. Under the SBIR contract (and with help from Proteon-funded work), it was found that a single processor router achieved a throughput significantly higher than originally anticipated. For this reason, a single processor router was

  6. New mathematical model for error reduction of stressed lap

    NASA Astrophysics Data System (ADS)

    Zhao, Pu; Yang, Shuming; Sun, Lin; Shi, Xinyu; Liu, Tao; Jiang, Zhuangde

    2016-05-01

    Stressed lap, compared to traditional polishing methods, has high processing efficiency. However, this method has disadvantages in processing nonsymmetric surface errors. A basic-function method is proposed to calculate parameters for a stressed-lap polishing system. It aims to minimize residual errors and is based on a matrix and nonlinear optimization algorithm. The results show that residual root-mean-square could be >15% after one process for classical trefoil error. The surface period errors close to the lap diameter were removed efficiently, up to 50% material removal.

  7. Overview of wideband packet protocols

    NASA Astrophysics Data System (ADS)

    Sherif, M. H.

    1992-10-01

    Wideband packet networks operate at rates equal to, or higher than, 64 kb/s, but lower than the basic broadband rate of 150 Mb/s, on cables or satellite links. Wideband packet protocols are the transmission protocols for these networks. They define open interfaces that can be used for public and private ISDNs. The protocols are defined in CCITT Recommendations G.764 and G.765. This paper describes the objectives of the wideband protocols, and how the objectives were achieved.

  8. Packet flow monitoring tool and method

    DOEpatents

    Thiede, David R [Richland, WA

    2009-07-14

    A system and method for converting packet streams into session summaries. Session summaries are a group of packets each having a common source and destination internet protocol (IP) address, and, if present in the packets, common ports. The system first captures packets from a transport layer of a network of computer systems, then decodes the packets captured to determine the destination IP address and the source IP address. The system then identifies packets having common destination IP addresses and source IP addresses, then writes the decoded packets to an allocated memory structure as session summaries in a queue.

  9. INTERIOR OF WEST SPAN LOOKING WEST (SHADOW OF VERTICAL LAPS ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    INTERIOR OF WEST SPAN LOOKING WEST (SHADOW OF VERTICAL LAPS PLACED ON ZONE III; ASPHALT ZONE IX) - Honey Run Bridge, Spanning Butte Creek, bypassed section of Honey Run Road (originally Carr Hill Road), Paradise, Butte County, CA

  10. FRICTION STIR LAP WELDING OF ALUMINUM - POLYMER USING SCRIBE TECHNOLOGY

    SciTech Connect

    Upadhyay, Piyush; Hovanski, Yuri; Fifield, Leonard S.; Simmons, Kevin L.

    2015-02-16

    Friction Stir Scribe (FSS) technology is a relatively new variant of Friction Stir Welding (FSW) which enables lap joining of dissimilar material with very different melting points and different high temperature flow behaviors. The cutter scribe attached at the tip of FSW tool pin effectively cuts the high melting point material such that a mechanically interlocking feature is created between the dissimilar materials. The geometric shape of this interlocking feature determines the shear strength attained by the lap joint. This work presents first use of scribe technology in joining polymers to aluminum alloy. Details of the several runs of scribe welding performed in lap joining of ~3.175mm thick polymers including HDPE, filled and unfilled Nylon 66 to 2mm thick AA5182 are presented. The effect of scribe geometry and length on weld interlocking features is presented along with lap shear strength evaluations.

  11. Double-Lap Shear Test For Honeycomb Core

    NASA Technical Reports Server (NTRS)

    Nettles, Alan T.; Hodge, Andrew J.

    1992-01-01

    Double-lap test measures shear strength of panel made of honeycomb core with 8-ply carbon-fiber/epoxy face sheets. Developed to overcome three principal disadvantages of prior standard single-lap shear test: specimen had to be more than 17 in. long; metal face sheets had to be used; and test introduced torque, with consequent bending and peeling of face sheets and spurious tensile or compressive loading of honeycomb.

  12. Adhesive-bonded scarf and stepped-lap joints

    NASA Technical Reports Server (NTRS)

    Hart-Smith, L. J.

    1973-01-01

    Continuum mechanics solutions are derived for the static load-carrying capacity of scarf and stepped-lap adhesive-bonded joints. The analyses account for adhesive plasticity and adherend stiffness imbalance and thermal mismatch. The scarf joint solutions include a simple algebraic formula which serves as a close lower bound, within a small fraction of a per cent of the true answer for most practical geometries and materials. Digital computer programs were developed and, for the stepped-lap joints, the critical adherend and adhesive stresses are computed for each step. The scarf joint solutions exhibit grossly different behavior from that for double-lap joints for long overlaps inasmuch as that the potential bond shear strength continues to increase with indefinitely long overlaps on the scarf joints. The stepped-lap joint solutions exhibit some characteristics of both the scarf and double-lap joints. The stepped-lap computer program handles arbitrary (different) step lengths and thickness and the solutions obtained have clarified potentially weak design details and the remedies. The program has been used effectively to optimize the joint proportions.

  13. L-Cysteine and L-AP4 microinjections in the rat caudal ventrolateral medulla decrease arterial blood pressure.

    PubMed

    Takemoto, Yumi

    2014-12-01

    The thiol amino acid L-cysteine increases arterial blood pressure (ABP) when injected into the cerebrospinal fluid space in conscious rats, indicating a pressor response to centrally acting L-cysteine. A prior synaptic membrane binding assay suggests that L-cysteine has a strong affinity for the L-2-amino-4-phosphonobutyric acid (L-AP4) binding site. The central action of L-cysteine may be vial-AP4 sensitive receptors. The present study investigated cardiovascular responses to L-cysteine and L-ap4 microinjected into the autonomic area of the caudal ventrolateral medulla (CVLM) where inhibitory neurons regulate ABP via pre-sympathetic vasomotor neurons. Both the injection of L-cysteine and L-AP4 in the CVLM sites identified with L-glutamate produced the same depressor and bradycardic responses in urethane-anesthetized rats. Neither a prior antagonist microinjection of MK801 for the N-methyl-D-aspartate (NMDA) receptor nor CNQX for the non-NMDA receptor attenuated the responses to L-cysteine, but the combination of the two receptor blocking with an additional prior injection abolished the response. In contrast, either receptor blockade alone abolished the response to L-AP4, indicating distinct mechanisms between responses to L-cysteine and L-AP4 in the CVLM. The results indicate that the CVLM is a central active site for L-cysteine's cardiovascular response. Central L-cysteine's action could be independent of the L-AP4 sensitive receptors. Cardiovascular regulation may involve endogenous L-cysteine in the CVLM. Further multidisciplinary examinations are required to elaborate on L-cysteine's functional roles in the CVLM.

  14. Flaw Tolerance in Lap Shear Brazed Joints. Part 1

    NASA Technical Reports Server (NTRS)

    Flom, Yury; Wang, Li-Qin

    2003-01-01

    Furnace brazing is a joining process used in the aerospace and other industries to produce strong permanent and hermetic structural joints. As in any joining process, brazed joints have various imperfections and defects. At the present time, our understanding of the influence of the internal defects on the strength of the brazed joints is not adequate. The goal of this 3-part investigation is to better understand the properties and failure mechanisms of the brazed joints containing defects. This study focuses on the behavior of the brazed lap shear joints because of their importance in manufacturing aerospace structures. In Part 1, an average shear strength capability and failure modes of the single lap joints are explored. Stainless steel specimens brazed with pure silver are tested in accordance with the AWS C3.2 standard. Comparison of the failure loads and the ultimate shear strength with the Finite Element Analysis (FEA) of the same specimens as a function of the overlap widths shows excellent correlation between the experimental and calculated values for the defect-free lap joints. A damage zone criterion is shown to work quite well in understanding the failure of the braze joints. In Part 2, the findings of the Part 1 will be verified on the larger test specimens. Also, various flaws will be introduced in the test specimens to simulate lack of braze coverage in the lap joints. Mechanical testing and FEA will be performed on these joints to verify that behavior of the flawed ductile lap joints is similar to joints with a reduced braze area. Finally, in Part 3, the results obtained in Parts 1 and 2 will be applied to the actual brazed structure to evaluate the load-carrying capability of a structural lap joint containing discontinuities. In addition, a simplified engineering procedure will be offered for the laboratory testing of the lap shear specimens.

  15. Selection of ionization paths of K2 on superfluid helium droplets by wave packet interference

    NASA Astrophysics Data System (ADS)

    Hild, Marek Bastian; Dufour, Adrien; Achazi, Georg; Patas, Alexander; Scheier, Paul; Lindinger, Albrecht

    2016-08-01

    We report on the control of wave packet dynamics for the ionization of K2 attached to the surface of superfluid helium droplets. The superfluid helium matrix acts as a heat sink and reduces the coherence time of molecular processes by dissipation. We use tailor-shaped pulses in order to activate or inhibit different ionization paths by constructive or destructive wave packet interference. A drastic change of the wave packet dynamics is observed by shifting the phase between the exciting sub pulses.

  16. Self-Interfering Wave Packets

    NASA Astrophysics Data System (ADS)

    Colas, David; Laussy, Fabrice P.

    2016-01-01

    We study the propagation of noninteracting polariton wave packets. We show how two qualitatively different concepts of mass that arise from the peculiar polariton dispersion lead to a new type of particlelike object from noninteracting fields—much like self-accelerating beams—shaped by the Rabi coupling out of Gaussian initial states. A divergence and change of sign of the diffusive mass results in a "mass wall" on which polariton wave packets bounce back. Together with the Rabi dynamics, this yields propagation of ultrafast subpackets and ordering of a spacetime crystal.

  17. Self-Interfering Wave Packets.

    PubMed

    Colas, David; Laussy, Fabrice P

    2016-01-15

    We study the propagation of noninteracting polariton wave packets. We show how two qualitatively different concepts of mass that arise from the peculiar polariton dispersion lead to a new type of particlelike object from noninteracting fields-much like self-accelerating beams-shaped by the Rabi coupling out of Gaussian initial states. A divergence and change of sign of the diffusive mass results in a "mass wall" on which polariton wave packets bounce back. Together with the Rabi dynamics, this yields propagation of ultrafast subpackets and ordering of a spacetime crystal. PMID:26824554

  18. Sports Medicine. Clinical Rotation. Instructor's Packet and Student Study Packet.

    ERIC Educational Resources Information Center

    Texas Univ., Austin. Extension Instruction and Materials Center.

    The materials in this packet are for a course designed to provide individualized classroom study for a specific area of clinical rotation--sports medicine. The instructor's manual describes the learning objectives together with a list of reference materials that should be provided for completion of the student worksheets, and lists suggested…

  19. Use of two-dimensional transmission photoelastic models to study stresses in double-lap bolted joints: Load transfer and stresses in the inner lap

    NASA Technical Reports Server (NTRS)

    Hyer, M. W.

    1980-01-01

    The determination of the stress distribution in the inner lap of double-lap, double-bolt joints using photoelastic models of the joint is discussed. The principal idea is to fabricate the inner lap of a photoelastic material and to use a photoelastically sensitive material for the two outer laps. With this setup, polarized light transmitted through the stressed model responds principally to the stressed inner lap. The model geometry, the procedures for making and testing the model, and test results are described.

  20. In the Public Interest: Law, Government, and Media. Maryland Women's History Resource Packet--1986.

    ERIC Educational Resources Information Center

    Maryland State Commission for Women, Baltimore.

    Designed to be used for National Women's History Week (March 2-8), this 1986 Maryland women's history resource packet centers around Maryland women who have made significant volunteer and career contributions in the areas of government, law, and the public interest media. The packet begins with suggested student activity lists and activity sheets…

  1. Environment Resource Packets Get Wide Use

    ERIC Educational Resources Information Center

    Chemical and Engineering News, 1974

    1974-01-01

    Announces the availability of the resource packet entitled "Noise Pollution," the third in the series prepared by the University of Maryland, and the main topics which will be covered in the remaining three packets. (CC)

  2. A robust coding scheme for packet video

    NASA Technical Reports Server (NTRS)

    Chen, Y. C.; Sayood, Khalid; Nelson, D. J.

    1991-01-01

    We present a layered packet video coding algorithm based on a progressive transmission scheme. The algorithm provides good compression and can handle significant packet loss with graceful degradation in the reconstruction sequence. Simulation results for various conditions are presented.

  3. A robust coding scheme for packet video

    NASA Technical Reports Server (NTRS)

    Chen, Yun-Chung; Sayood, Khalid; Nelson, Don J.

    1992-01-01

    A layered packet video coding algorithm based on a progressive transmission scheme is presented. The algorithm provides good compression and can handle significant packet loss with graceful degradation in the reconstruction sequence. Simulation results for various conditions are presented.

  4. LAP5 and LAP6 Encode Anther-Specific Proteins with Similarity to Chalcone Synthase Essential for Pollen Exine Development in Arabidopsis1[W][OA

    PubMed Central

    Dobritsa, Anna A.; Lei, Zhentian; Nishikawa, Shuh-ichi; Urbanczyk-Wochniak, Ewa; Huhman, David V.; Preuss, Daphne; Sumner, Lloyd W.

    2010-01-01

    Pollen grains of land plants have evolved remarkably strong outer walls referred to as exine that protect pollen and interact with female stigma cells. Exine is composed of sporopollenin, and while the composition and synthesis of this biopolymer are not well understood, both fatty acids and phenolics are likely components. Here, we describe mutations in the Arabidopsis (Arabidopsis thaliana) LESS ADHESIVE POLLEN (LAP5) and LAP6 that affect exine development. Mutation of either gene results in abnormal exine patterning, whereas pollen of double mutants lacked exine deposition and subsequently collapsed, causing male sterility. LAP5 and LAP6 encode anther-specific proteins with homology to chalcone synthase, a key flavonoid biosynthesis enzyme. lap5 and lap6 mutations reduced the accumulation of flavonoid precursors and flavonoids in developing anthers, suggesting a role in the synthesis of phenolic constituents of sporopollenin. Our in vitro functional analysis of LAP5 and LAP6 using 4-coumaroyl-coenzyme A yielded bis-noryangonin (a commonly reported derailment product of chalcone synthase), while similar in vitro analyses using fatty acyl-coenzyme A as the substrate yielded medium-chain alkyl pyrones. Thus, in vitro assays indicate that LAP5 and LAP6 are multifunctional enzymes and may play a role in both the synthesis of pollen fatty acids and phenolics found in exine. Finally, the genetic interaction between LAP5 and an anther gene involved in fatty acid hydroxylation (CYP703A2) demonstrated that they act synergistically in exine production. PMID:20442277

  5. Homelessness: A General Information Packet.

    ERIC Educational Resources Information Center

    Homelessness Exchange, Washington, DC.

    This packet contains documents that provide general information about homelessness and the need for both Federal and local action to help the homeless people in America. Sections 1 and 2 contain the following articles released by the Homelessness Information Exchange: (1) "The Problem of Homelessness Nationwide"; and "Alternative Family Housing…

  6. Dynamics of quantum wave packets

    SciTech Connect

    Gosnell, T.R.; Taylor, A.J.; Rodriguez, G.; Clement, T.S.

    1998-11-01

    This is the final report of a three-year, Laboratory Directed Research and Development (LDRD) project at the Los Alamos National Laboratory (LANL). The objective of this project was to develop ultrafast laser techniques for the creation and measurement of quantum vibrational wave packets in gas phase diatomic molecules. Moreover, the authors sought to manipulate the constitution of these wave packets in terms of harmonic-oscillator basis wavefunctions by manipulating the time-dependent amplitude and phase of the incident ultrashort laser pulse. They specifically investigated gaseous diatomic potassium (K{sub 2}), and discovered variations in the shape of the wave packets as a result of changing the linear chirp in the ultrashort preparation pulse. In particular, they found evidence for wave-packet compression for a specific degree of chirp. Important ancillary results include development of new techniques for denoising and deconvolution of femtosecond time traces and techniques for diagnosing the phase and amplitude of the electric field of femtosecond laser pulses.

  7. Population and Development [Issue Packet].

    ERIC Educational Resources Information Center

    American Freedom from Hunger Foundation, Washington, DC.

    A variety of informational materials is compiled in this issue packet concentrating on population and development. The materials have been assembled to understand the issues associated with the facts of the world's population and to try to invent new forms of action and thought necessary to find the possibilities hidden in the population issue.…

  8. Dissection & Science Fairs. [Information Packet.

    ERIC Educational Resources Information Center

    National Anti-Vivisection Society, Chicago, IL.

    This collection of pamphlets and articles reprinted from other National Anti-Vivisection Society (NAVS) publications was compiled to address the issues of classroom laboratory dissection and the use of animals in science fair projects. Three of the pamphlets contained in this packet are student handbooks designed to help students of elementary,…

  9. Hunger and Development [Issue Packet].

    ERIC Educational Resources Information Center

    American Freedom from Hunger Foundation, Washington, DC.

    A variety of informational materials is compiled in this issue packet concentrating on hunger and development. They have been assembled to understand the issues associated with the facts of world hunger and to try to invent new forms of action and thought necessary to find the possibilities hidden in the hunger issue. Items include: (1) a fact and…

  10. Recycling Study Guide [Resource Packet].

    ERIC Educational Resources Information Center

    Wisconsin State Dept. of Natural Resources, Madison.

    This resource packet contains six documents developed by the Wisconsin Department of Natural Resources in order to help teachers infuse the environmental education topics of recycling and solid waste into social studies, art, English, health, mathematics, science, and environmental education classes. "Recycling Study Guide" contains 19 activities…

  11. Ancient Chinese Bronzes: Teacher's Packet.

    ERIC Educational Resources Information Center

    Smithsonian Institution, Washington, DC. Arthur M. Sackler Gallery.

    The focus of this teacher's packet is the bronze vessels made for the kings and great families of the early Chinese dynasties between 1700 B.C. and 200 A.D. The materials in the guide are intended for use by teachers and students visiting the exhibition, "The Arts of China," at the Arthur M. Sackler Gallery of the Smithsonian Institution in…

  12. 78 FR 63228 - Determination That Potassium Citrate, 10 Milliequivalents/Packet and 20 Milliequivalents/Packet...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-10-23

    ... HUMAN SERVICES Food and Drug Administration Determination That Potassium Citrate, 10 Milliequivalents...) has determined that Potassium Citrate, 10 milliequivalents/packet (mEq/packet) and 20 mEq/ packet, was... approve abbreviated new drug applications (ANDAs) for Potassium Citrate, 10 mEq/packet and 20...

  13. Packet Radio: An Alternative Way to Connect.

    ERIC Educational Resources Information Center

    Lucas, Larry W.

    1995-01-01

    Explains packet radio as a form of telecomputing in which digital data is transported via radio waves instead of telephone lines or other cabling, and describes how it can be used by students to access the Internet. Highlights include packet bulletin board systems and equipment needed for a packet radio station. (LRW)

  14. [KIND Worksheet Packet: Wild Animals (Junior).

    ERIC Educational Resources Information Center

    National Association for Humane and Environmental Education, East Haddam, CT.

    This packet is the junior part of a series of worksheet packets available at both junior (grades 3-4) and senior (grades 5-6) levels that covers a variety of humane and environmental topics. Each packet includes 10 worksheets, all of which originally appeared in past issues of the annual teaching magazine "KIND (Kids in Nature's Defense) Teacher."…

  15. Trade Related Reading Packets for Disabled Readers.

    ERIC Educational Resources Information Center

    Davis, Beverly; Woodruff, Nancy S.

    Six trade-related reading packets for disabled readers are provided for these trades: assemblers, baking, building maintenance, data entry, interior landscaping, and warehousing. Each packet stresses from 9 to 14 skills. Those skills common to most packets include context clues, fact or opinion, details, following directions, main idea,…

  16. [KIND Worksheet Packet: Wild Animals (Senior).

    ERIC Educational Resources Information Center

    National Association for Humane and Environmental Education, East Haddam, CT.

    This packet is the senior part of a series of worksheet packets available at both junior (grades 3-4) and senior (grades 5-6) levels that covers a variety of humane and environmental topics. Each packet includes 10 worksheets, all of which originally appeared in past issues of the annual teaching magazine "KIND (Kids in Nature's Defense) Teacher."…

  17. Lap time optimisation of a racing go-kart

    NASA Astrophysics Data System (ADS)

    Lot, Roberto; Dal Bianco, Nicola

    2016-02-01

    The minimum lap time optimal control problem has been solved for a go-kart model. The symbolic algebra software Maple has been used to derive equations of motion and an indirect method has been adopted to solve the optimal control problem. Simulation has been successfully performed on a full track lap with a multibody model endowed with seven degrees of freedom. Geometrical and mechanical characteristics of a real kart have been measured by a lab test to feed the mathematical model. Telemetry recorded in an entire lap by a professional driver has been compared to simulation results in order to validate the model. After the reliability of the optimal control model was proved, the simulation has been used to study the peculiar dynamics of go-karts and focus to tyre slippage dynamics, which is highly affected by the lack of differential.

  18. Anti-Litter Curriculum Packet, Interdisciplinary, K-12.

    ERIC Educational Resources Information Center

    Tillis, Richard

    This curriculum packet consists of 20 illustrated cards with 15 activities designed to create "positive feelings" about a clean environment. Activities range from picture coloring for younger students, to lessons such as the economic and health problems litter creates for older students. Objectives include encouraging anti-litter and…

  19. Characterization studies on the additives mixed L-arginine phosphate monohydrate (LAP) crystals

    NASA Astrophysics Data System (ADS)

    Haja Hameed, A. S.; Karthikeyan, C.; Ravi, G.; Rohani, S.

    2011-04-01

    L-arginine phosphate monohydrate (LAP), potassium thiocyanate (KSCN) mixed LAP (LAP:KSCN) and sodium sulfite (Na 2SO 3) mixed LAP (LAP:Na 2SO 3) single crystals were grown by slow cooling technique. The effect of microbial contamination and coloration on the growth solutions was studied. The crystalline powders of the grown crystals were examined by X-ray diffraction and the lattice parameters of the crystals were estimated. From the FTIR spectroscopic analysis, various functional group frequencies associated with the crystals were assigned. Vickers microhardness studies were done on {1 0 0} faces for pure and additives mixed LAP crystals. From the preliminary surface second harmonic generation (SHG) results, it was found that the SHG intensity at (1 0 0) face of LAP:KSCN crystal was much stronger than that of pure LAP.

  20. RPC-LAP: The Rosetta Langmuir Probe Instrument

    NASA Astrophysics Data System (ADS)

    Eriksson, A. I.; Boström, R.; Gill, R.; Åhlén, L.; Jansson, S.-E.; Wahlund, J.-E.; André, M.; Mälkki, A.; Holtet, J. A.; Lybekk, B.; Pedersen, A.; Blomberg, L. G.

    2007-02-01

    The Rosetta dual Langmuir probe instrument, LAP, utilizes the multiple powers of a pair of spherical Langmuir probes for measurements of basic plasma parameters with the aim of providing detailed knowledge of the outgassing, ionization, and subsequent plasma processes around the Rosetta target comet. The fundamental plasma properties to be studied are the plasma density, the electron temperature, and the plasma flow velocity. However, study of electric fields up to 8 kHz, plasma density fluctuations, spacecraft potential, integrated UV flux, and dust impacts is also possible. LAP is fully integrated in the Rosetta Plasma Consortium (RPC), the instruments of which together provide a comprehensive characterization of the cometary plasma.

  1. Packet personal radiation monitor

    DOEpatents

    Phelps, James E.

    1989-01-01

    A personal radiation monitor of the chirper type is provided for detecting ionizing radiation. A battery powered high voltage power supply is used to generate and apply a high voltage bias to a G-M tube radiation sensor. The high voltage is monitored by a low-loss sensing network which generates a feedback signal to control the high voltage power supply such that the high voltage bias is recharged to +500 VDC when the current pulses of the sensor, generated by the detection of ionizing radiation events, discharges the high voltage bias to +450 VDC. During the high voltage recharge period an audio transducer is activated to produce an audible "chirp". The rate of the "chirps" is controlled by the rate at which the high voltage bias is recharged, which is proportional to the radiation field intensity to which the sensor is exposed. The chirp rate sensitivity is set to be approximately 1.5 (chirps/min/MR/hr.). The G-M tube sensor is used in a current sensing mode so that the device does not paralyze in a high radiation field.

  2. Packet personal radiation monitor

    DOEpatents

    Phelps, J.E.

    1988-03-31

    A personal radiation monitor of the chirper type is provided for detecting ionizing radiation. A battery powered high voltage power supply is used to generate and apply a high voltage bias to a G-M tube radiation sensor. The high voltage is monitored by a low-loss sensing network which generates a feedback signal to control the high voltage power supply such that the high voltage bias is recharged to +500 VDC when the current pulses of the sensor, generated by the detection of ionizing radiatonevents, discharges the high voltage bias to +450 VDC. During the high voltage recharge period an audio transducer is activated to produce an audible ''chirp''. The rate of the ''chirps'' is controlled by the rate at which the high voltage bias is recharged, which is proportional to the radiation field intensity to which the sensor is exposed. The chirp rate sensitivity is set to be approximately 1.5 (chirps/min/MR/hr.). The G-M tube sensor is used in a current sensing mode so that the device does not paralyze in a high radiation field. 2 figs.

  3. Solar Energy Education Packet for Elementary & Secondary Students.

    ERIC Educational Resources Information Center

    Center for Renewable Resources, Washington, DC.

    The arrangement of this packet is essentially evolutionary, with a conscious effort to alternate reading assignments, activities and experiments. It begins with solar energy facts and terminology as background to introduce the reader to basic concepts. It progresses into a discussion of passive solar systems. This is followed by several projects…

  4. Group-normalized wavelet packet signal processing

    NASA Astrophysics Data System (ADS)

    Shi, Zhuoer; Bao, Zheng

    1997-04-01

    Since the traditional wavelet and wavelet packet coefficients do not exactly represent the strength of signal components at the very time(space)-frequency tilling, group- normalized wavelet packet transform (GNWPT), is presented for nonlinear signal filtering and extraction from the clutter or noise, together with the space(time)-frequency masking technique. The extended F-entropy improves the performance of GNWPT. For perception-based image, soft-logic masking is emphasized to remove the aliasing with edge preserved. Lawton's method for complex valued wavelets construction is extended to generate the complex valued compactly supported wavelet packets for radar signal extraction. This kind of wavelet packets are symmetry and unitary orthogonal. Well-defined wavelet packets are chosen by the analysis remarks on their time-frequency characteristics. For real valued signal processing, such as images and ECG signal, the compactly supported spline or bi- orthogonal wavelet packets are preferred for perfect de- noising and filtering qualities.

  5. Ingestion of Laundry Detergent Packets in Children.

    PubMed

    Shah, Lindsey Wilson

    2016-08-01

    Ingestion of laundry detergent packets is an important threat to young children. Because of their developmental stage, toddlers are prone to place these small, colorful packets in their mouths. The packets can easily burst, sending a large volume of viscous, alkaline liquid throughout the oropharynx. Ingestion causes major toxic effects, including depression of the central nervous system, metabolic acidosis, respiratory distress, and dysphagia. Critical care nurses should anticipate these clinical effects and facilitate prompt intervention. Increased understanding of the risks and clinical effects of ingestion of laundry detergent packets will better prepare critical care nurses to provide care for these children. (Critical Care Nurse 2016; 36[4]:70-75).

  6. Ingestion of Laundry Detergent Packets in Children.

    PubMed

    Shah, Lindsey Wilson

    2016-08-01

    Ingestion of laundry detergent packets is an important threat to young children. Because of their developmental stage, toddlers are prone to place these small, colorful packets in their mouths. The packets can easily burst, sending a large volume of viscous, alkaline liquid throughout the oropharynx. Ingestion causes major toxic effects, including depression of the central nervous system, metabolic acidosis, respiratory distress, and dysphagia. Critical care nurses should anticipate these clinical effects and facilitate prompt intervention. Increased understanding of the risks and clinical effects of ingestion of laundry detergent packets will better prepare critical care nurses to provide care for these children. (Critical Care Nurse 2016; 36[4]:70-75). PMID:27481804

  7. Structural Features of the Pseudomonas fluorescens Biofilm Adhesin LapA Required for LapG-Dependent Cleavage, Biofilm Formation, and Cell Surface Localization

    PubMed Central

    Boyd, Chelsea D.; Smith, T. Jarrod; El-Kirat-Chatel, Sofiane; Newell, Peter D.; Dufrêne, Yves F.

    2014-01-01

    The localization of the LapA protein to the cell surface is a key step required by Pseudomonas fluorescens Pf0-1 to irreversibly attach to a surface and form a biofilm. LapA is a member of a diverse family of predicted bacterial adhesins, and although lacking a high degree of sequence similarity, family members do share common predicted domains. Here, using mutational analysis, we determine the significance of each domain feature of LapA in relation to its export and localization to the cell surface and function in biofilm formation. Our previous work showed that the N terminus of LapA is required for cleavage by the periplasmic cysteine protease LapG and release of the adhesin from the cell surface under conditions unfavorable for biofilm formation. We define an additional critical region of the N terminus of LapA required for LapG proteolysis. Furthermore, our results suggest that the domains within the C terminus of LapA are not absolutely required for biofilm formation, export, or localization to the cell surface, with the exception of the type I secretion signal, which is required for LapA export and cell surface localization. In contrast, deletion of the central repetitive region of LapA, consisting of 37 repeats of 100 amino acids, results in an inability to form a biofilm. We also used single-molecule atomic force microscopy to further characterize the role of these domains in biofilm formation on hydrophobic and hydrophilic surfaces. These studies represent the first detailed analysis of the domains of the LapA family of biofilm adhesin proteins. PMID:24837291

  8. Material characterization of structural adhesives in the lap shear mode

    NASA Technical Reports Server (NTRS)

    Sancaktar, E.; Schenck, S. C.

    1983-01-01

    A general method for characterizing structual adhesives in the bonded lap shear mode is proposed. Two approaches in the form of semiempirical and theoretical approaches are used. The semiempirical approach includes Ludwik's and Zhurkov's equations to describe respectively, the failure stresses in the constant strain rate and constant stress loading modes with the inclusion of the temperature effects. The theoretical approach is used to describe adhesive shear stress-strain behavior with the use of viscoelastic or nonlinear elastic constitutive equations. Two different model adhesives are used in the single lap shear mode with titanium adherends. These adhesives (one of which was developed at NASA Langley Research Center) are currently considered by NASA for possible aerospace applications. Use of different model adhesives helps in assessment of the generality of the method.

  9. FRICTION-STIR-LAP-WELDS OF AA6111 ALUMINUM ALLOY

    SciTech Connect

    Yadava, Manasij; Mishra, Rajiv S.; Chen, Y. L.; Gayden, X.; Grant, Glenn J.

    2007-01-09

    Lap joints of 1 mm thick AA6111 aluminum sheets were made by friction stir welding, using robotic and conventional machines. Welds were made for advancing as well as retreating side loading. Thinning in welds was quantified. Lap shear test of welds was conducted in as-welded and paint-baked conditions. Conventional machine welds showed less thinning and better strength than robotic machine welds. Process forces in conventional machine welding were higher. Paint bake treatment improved the weld strength; but the improvement varied with process parameters. Advancing side loaded welds achieved higher strength than the retreating side loaded welds. Fracture location was found to occur on the loaded side of the weld and along the thinning defect.

  10. The impact of lubricants on the precision lapping process.

    PubMed

    Jiang, Xionghua; Chen, Zhenxing; Wolfram, Joy; Wei, Zhongxian; Shen, Yuqiu; Yang, Zhizhou

    2014-12-01

    The impact of lubricants on pole-tip recession and surface morphology of hard disk drive heads in the precision lapping process was investigated with atomic force microscopy, scanning electron microscopy, and auger electron spectroscopy. In particular, the effects of deionized water, hydrocarbon oil, ethanediol, isopropanol, and ethanol lubricants were evaluated. The results reveal that proper selection of lubricant is critical for achieving optimal performance in the lapping process. A mixture of 68% hydrocarbon oil, 30% isopropanol, and 2% octadecenoic acid was found to yield the most favorable results, displaying a writer shield recession, first shield of reader recession, and surface roughness of 0.423, 0.581, and 0.242 nm, respectively. PMID:25387606

  11. Investigation into Interface Lifting Within FSW Lap Welds

    SciTech Connect

    K. S. Miller; C. R. Tolle; D. E. Clark; C. I. Nichol; T. R. McJunkin; H. B. Smartt

    2008-06-01

    Friction stir welding (FSW) is rapidly penetrating the welding market in many materials and applications, particularly in aluminum alloys for transportation applications. As this expansion outside the research laboratory continues, fitness for service issues will arise, and process control and NDE methods will become important determinants of continued growth. The present paper describes research into FSW weld nugget flaw detection within aluminum alloy lap welds. We present results for two types of FSW tool designs: a smooth pin tool and a threaded pin tool. We show that under certain process parameters (as monitored during welding with a rotating dynamometer that measures x, y, z, and torque forces) and tooling designs, FSW lap welds allow significant nonbonded interface lifting of the lap joint, while forming a metallurgical bond only within the pin region of the weld nugget. These lifted joints are often held very tightly together even though unbonded, and might be expected to pass cursory NDE while representing a substantial compromise in joint mechanical properties. The phenomenon is investigated here via radiographic and ultrasonic NDE techniques, with a copper foil marking insert (as described elsewhere) and by the tensile testing of joints. As one would expect, these results show that tool design and process parameters significantly affect plactic flow and this lifted interface. NDE and mechanical strength ramifications of this defect are discussed.

  12. Residual Strength Analyses of Riveted Lap-Splice Joints

    NASA Technical Reports Server (NTRS)

    Seshadri, B. R.; Newman, J. C., Jr.

    2000-01-01

    The objective of this paper was to analyze the crack-linkup behavior in riveted-stiffened lap-splice joint panels with small multiple-site damage (MSD) cracks at several adjacent rivet holes. Analyses are based on the STAGS (STructural Analysis of General Shells) code with the critical crack-tip-opening angle (CTOA) fracture criterion. To account for high constraint around a crack front, the "plane strain core" option in STAGS was used. The importance of modeling rivet flexibility with fastener elements that accurately model load transfer across the joint is discussed. Fastener holes are not modeled but rivet connectivity is accounted for by attaching rivets to the sheet on one side of the cracks that simulated both the rivet diameter and MSD cracks. Residual strength analyses made on 2024-T3 alloy (1.6-mm thick) riveted-lap-splice joints with a lead crack and various size MSD cracks were compared with test data from Boeing Airplane Company. Analyses were conducted for both restrained and unrestrained buckling conditions. Comparison of results from these analyses and results from lap-splice-joint test panels, which were partially restrained against buckling indicate that the test results were bounded by the failure loads predicted by the analyses with restrained and unrestrained conditions.

  13. Bad data packet capture device

    DOEpatents

    Chen, Dong; Gara, Alan; Heidelberger, Philip; Vranas, Pavlos

    2010-04-20

    An apparatus and method for capturing data packets for analysis on a network computing system includes a sending node and a receiving node connected by a bi-directional communication link. The sending node sends a data transmission to the receiving node on the bi-directional communication link, and the receiving node receives the data transmission and verifies the data transmission to determine valid data and invalid data and verify retransmissions of invalid data as corresponding valid data. A memory device communicates with the receiving node for storing the invalid data and the corresponding valid data. A computing node communicates with the memory device and receives and performs an analysis of the invalid data and the corresponding valid data received from the memory device.

  14. Apparatus and method for lapping an edge surface of an object

    NASA Technical Reports Server (NTRS)

    Rossi, Vito N. (Inventor)

    1989-01-01

    An apparatus for lapping an edge surface of an object comprises a block having a side adapted to engage a wide surface of an object, adjustable spacers disposed on the block and adapted to engage a lap plate, and a weighted spring disposed on the block for urging the spacers and the object edge surface towards the lap plate. A method for lapping comprises setting surfaces of adjustable spacers disposed on a block to be substantially the same distance from the block, affixing a wide surface of an object to the block, urging an edge surface of the object and the spacers towards a lap plate, lapping the edge of the object, inspecting the edge for parallelism to a reference line, resetting the spacers and relapping the edge surface.

  15. Optimal tubular adhesive-bonded lap joint of the carbon fiber epoxy composite shaft

    NASA Astrophysics Data System (ADS)

    Kim, Ki S.; Kim, Won T.; Lee, Dai G.; Jun, Eui J.

    The effects of the adhesive thickness and the adherend surface roughness on the fatigue strength of a tubular adhesive-bonded single lap joint were investigated using fatigue test specimens whose adherends were made of S45C carbon steel. Results of fatigue tests showed that the optimal arithmetic surface roughness of the adherends is about 2 microns and the optimal adhesive thickness is about 0.15 mm. Using these values, the prototype torsional adhesive joints were manufactured for power transmission shafts of an automotive vehicle or a small helicopter, and static tests under torque were performed on a single-lap joint, a single-lap joint with scarf, a double-lap joint, and a double-lap joint with scarf. It was found that the double-lap joint was superior among the joints, in terms of torque capacity and manufacturing cost.

  16. Experiments examining drag in linear droplet packets

    NASA Astrophysics Data System (ADS)

    Nguyen, Q. V.; Dunn-Rankin, D.

    1992-01-01

    This paper presents an experimental study of vertically traveling droplet packets, where the droplets in each packet are aligned linearly, one behind another. The paper describes in detail, an experimental apparatus that produces repeatable, linearly aligned, and isolated droplet packets containing 1 6 droplets per packet. The apparatus is suitable for examining aerodynamic interactions between droplets within each packet. This paper demonstrates the performance of the apparatus by examining the drag reduction and collision of droplets traveling in the wake of a lead droplet. Comparison of a calculated single droplet trajectory with the detailed droplet position versus time data for a droplet packet provides the average drag reduction experienced by the trailing droplets due to the aerodynamic wake of the lead droplet. For the conditions of our experiment (4 droplet packet, 145 μm methanol droplets, 10 m/s initial velocity, initial droplet spacing of 5.2 droplet diameters, Reynolds number approx. 80) the average drag on the first trailing droplet was found to be 75% of the drag on the lead droplet.

  17. Interconnecting network for switching data packets and method for switching data packets

    DOEpatents

    Benner, Alan Frederic; Minkenberg, Cyriel Johan Agnes; Stunkel, Craig Brian

    2010-05-25

    The interconnecting network for switching data packets, having data and flow control information, comprises a local packet switch element (S1) with local input buffers (I(1,1) . . . I(1,y)) for buffering the incoming data packets, a remote packet switch element (S2) with remote input buffers (I(2,1) . . . I(2,y)) for buffering the incoming data packets, and data lines (L) for interconnecting the local and the remote packet switch elements (S1, S2). The interconnecting network further comprises a local and a remote arbiter (A1, A2) which are connected via control lines (CL) to the input buffers (I(1,1) . . . I(1,y), I(2,1) . . . I(2,y)), and which are formed such that they can provide that the flow control information is transmitted via the data lines (L) and the control lines (CL).

  18. Numerical solutions for heat flow in adhesive lap joints

    NASA Technical Reports Server (NTRS)

    Howell, P. A.; Winfree, William P.

    1992-01-01

    The present formulation for the modeling of heat transfer in thin, adhesively bonded lap joints precludes difficulties associated with large aspect ratio grids required by standard FEM formulations. This quasi-static formulation also reduces the problem dimensionality (by one), thereby minimizing computational requirements. The solutions obtained are found to be in good agreement with both analytical solutions and solutions from standard FEM programs. The approach is noted to yield a more accurate representation of heat-flux changes between layers due to a disbond.

  19. Issues in packet radio network design

    NASA Technical Reports Server (NTRS)

    Leiner, Barry M.; Nielson, Donald L.; Tobagi, Fouad A.

    1987-01-01

    The physical aspects of a packet radio network design, the automated management of the network, and the interface of the network to the users are examined. The networks provide data communications to users located over a broad geographic region where direct radio or wire connection between the source and destination user is not practical; the network consists of a radio, antenna, and digital controller. The physical connectivity, bandwidth-time-space management, channel access, and data link control of the network are analyzed. Consideration is given to link determination and control, routing and packet forwarding, congestion and flow control, and supported users management. The operation and management of a packet radio network, in particular network deployment and maintenance, network access methods, and its effect on the radio spectrum, are discussed. The performance and cost of a packet radio network are evaluated.

  20. A Packet Discarding Method with Two Parametrers

    NASA Astrophysics Data System (ADS)

    Fujii, Atsuro; Inai, Hiroshi

    In order to avoid congestion in the network and to achieve a fair share of the resource among communication flows, the packet discarding method called RED (Random Early Detection) has been proposed. In that method, a router randomly discards arriving packets before its buffer overflows. Although some enhanced methods of RED have been proposed, they employ complicated controls to achieve high throughput and fairness among communication flows. However, many control parameters in the complicated methods would prevent from reaching their practical stages. This paper proposes a simple packet discarding method which reduces the number of parameters and provides better performance than existing ones. Concretely speaking, our method omits the probabilistic packet discard from RED. Via simulation, the proposed method provides higher throughput than existing ones and almost equal fairness.

  1. Individualized Science Packets for Gifted Students.

    ERIC Educational Resources Information Center

    Blurton, Craig

    1983-01-01

    Discusses four problems facing gifted students in elementary science classrooms. Suggests development of teacher-made science packets to resolve these and other problems. A sample lesson on animal classification for grade three is provided. (JN)

  2. Predictive onboard flow control for packet switching satellites

    NASA Technical Reports Server (NTRS)

    Bobinsky, Eric A.

    1992-01-01

    We outline two alternate approaches to predicting the onset of congestion in a packet switching satellite, and argue that predictive, rather than reactive, flow control is necessary for the efficient operation of such a system. The first method discussed is based on standard, statistical techniques which are used to periodically calculate a probability of near-term congestion based on arrival rate statistics. If this probability exceeds a present threshold, the satellite would transmit a rate-reduction signal to all active ground stations. The second method discussed would utilize a neural network to periodically predict the occurrence of buffer overflow based on input data which would include, in addition to arrival rates, the distributions of packet lengths, source addresses, and destination addresses.

  3. Predictive onboard flow control in packet switching satellites

    NASA Technical Reports Server (NTRS)

    Bobinsky, E. A.

    1992-01-01

    We outline two alternate approaches to predicting the onset of congestion in a packet switching satellite, and argue that predictive, rather than reactive, flow control is necessary for the efficient operation of such a system. The first method discussed is based on standard, statistical techniques which are used to periodically calculate a probability of near-term congestion based on arrival rate statistics. If this probability exceeds a present threshold, the satellite would transmit a rate-reduction signal to all active ground stations. The second method discussed would utilize a neural network to periodically predict the occurrence of buffer overflow based on input data which would include, in addition to arrival rates, the distributions of packet lengths, source addresses, and destination addresses.

  4. Improvement of transformer core magnetic properties using the step-lap design

    NASA Astrophysics Data System (ADS)

    Valkovic, Z.; Rezic, A.

    1992-07-01

    Magnetic properties of the step-lap joints have been investigated experimentally on two three-phase three-leg transformer cores. Using the step-lap joint design, a reduction of the total core loss of 2 to 4.4% and of the exciting power of 31 to 37% has been obtained.

  5. Comparison of Ring-Buffer-Based Packet Capture Solutions

    SciTech Connect

    Barker, Steven Andrew

    2015-10-01

    Traditional packet-capture solutions using commodity hardware incur a large amount of overhead as packets are copied multiple times by the operating system. This overhead slows sensor systems to a point where they are unable to keep up with high bandwidth traffic, resulting in dropped packets. Incomplete packet capture files hinder network monitoring and incident response efforts. While costly commercial hardware exists to capture high bandwidth traffic, several software-based approaches exist to improve packet capture performance using commodity hardware.

  6. Mechanistic Features of Nanodiamonds in the Lapping of Magnetic Heads

    PubMed Central

    Jiang, Xionghua; Chen, Zhenxing; Wolfram, Joy; Yang, Zhizhou

    2014-01-01

    Nanodiamonds, which are the main components of slurry in the precision lapping process of magnetic heads, play an important role in surface quality. This paper studies the mechanistic features of nanodiamond embedment into a Sn plate in the lapping process. This is the first study to develop mathematical models for nanodiamond embedment. Such models can predict the optimum parameters for particle embedment. From the modeling calculations, the embedded pressure satisfies p0 = (3/2)·(W/πa2) and the indentation depth satisfies δ=k1P/HV. Calculation results reveal that the largest embedded pressure is 731.48 GPa and the critical indentation depth δ is 7 nm. Atomic force microscopy (AFM), scanning electron microscopy (SEM), and Auger electron spectroscopy (AES) were used to carry out surface quality detection and analysis of the disk head. Both the formation of black spots on the surface and the removal rate have an important correlation with the size of nanodiamonds. The results demonstrate that an improved removal rate (21 nm·min−1) can be obtained with 100 nm diamonds embedded in the plate. PMID:25045730

  7. Large-Scale Advanced Prop-Fan (LAP)

    NASA Technical Reports Server (NTRS)

    Degeorge, C. L.

    1988-01-01

    In recent years, considerable attention has been directed toward improving aircraft fuel efficiency. Analytical studies and research with wind tunnel models have demonstrated that the high inherent efficiency of low speed turboprop propulsion systems may now be extended to the Mach .8 flight regime of today's commercial airliners. This can be accomplished with a propeller, employing a large number of thin highly swept blades. The term Prop-Fan has been coined to describe such a propulsion system. In 1983 the NASA-Lewis Research Center contracted with Hamilton Standard to design, build and test a near full scale Prop-Fan, designated the Large Scale Advanced Prop-Fan (LAP). This report provides a detailed description of the LAP program. The assumptions and analytical procedures used in the design of Prop-Fan system components are discussed in detail. The manufacturing techniques used in the fabrication of the Prop-Fan are presented. Each of the tests run during the course of the program are also discussed and the major conclusions derived from them stated.

  8. Ultrasonic guided wave inspection of Inconel 625 brazed lap joints

    NASA Astrophysics Data System (ADS)

    Comot, Pierre; Bocher, Philippe; Belanger, Pierre

    2016-04-01

    The aerospace industry has been investigating the use of brazing for structural joints, as a mean of reducing cost and weight. There therefore is a need for a rapid, robust, and cost-effective non-destructive testing method for evaluating the structural integrity of the joints. The mechanical strength of brazed joints depends mainly on the amount of brittle phases in their microstructure. Ultrasonic guided waves offer the possibility of detecting brittle phases in joints using spatio-temporal measurements. Moreover, they offer the opportunity to inspect complex shape joints. This study focused on the development of a technique based on ultrasonic guided waves for the inspection of Inconel 625 lap joints brazed with BNi-2 filler metal. A finite element model of a lap joint was used to optimize the inspection parameters and assess the feasibility of detecting the amount of brittle phases in the joint. A finite element parametric study simulating the input signal shape, the center frequency, and the excitation direction was performed. The simulations showed that the ultrasonic guided wave energy transmitted through, and reflected from, the joints was proportional to the amount of brittle phases in the joint.

  9. Nonlinear Analysis of Bonded Composite Single-LAP Joints

    NASA Technical Reports Server (NTRS)

    Oterkus, E.; Barut, A.; Madenci, E.; Smeltzer, S. S.; Ambur, D. R.

    2004-01-01

    This study presents a semi-analytical solution method to analyze the geometrically nonlinear response of bonded composite single-lap joints with tapered adherend edges under uniaxial tension. The solution method provides the transverse shear and normal stresses in the adhesive and in-plane stress resultants and bending moments in the adherends. The method utilizes the principle of virtual work in conjunction with von Karman s nonlinear plate theory to model the adherends and the shear lag model to represent the kinematics of the thin adhesive layer between the adherends. Furthermore, the method accounts for the bilinear elastic material behavior of the adhesive while maintaining a linear stress-strain relationship in the adherends. In order to account for the stiffness changes due to thickness variation of the adherends along the tapered edges, their in-plane and bending stiffness matrices are varied as a function of thickness along the tapered region. The combination of these complexities results in a system of nonlinear governing equilibrium equations. This approach represents a computationally efficient alternative to finite element method. Comparisons are made with corresponding results obtained from finite-element analysis. The results confirm the validity of the solution method. The numerical results present the effects of taper angle, adherend overlap length, and the bilinear adhesive material on the stress fields in the adherends, as well as the adhesive, of a single-lap joint

  10. Lap Shear Testing of Candidate Radiator Panel Adhesives

    NASA Technical Reports Server (NTRS)

    Ellis, David; Briggs, Maxwell; McGowan, Randy

    2013-01-01

    During testing of a subscale radiator section used to develop manufacturing techniques for a full-scale radiator panel, the adhesive bonds between the titanium heat pipes and the aluminum face sheets failed during installation and operation. Analysis revealed that the thermal expansion mismatch between the two metals resulted in relatively large shear stresses being developed even when operating the radiator at moderate temperatures. Lap shear testing of the adhesive used in the original joints demonstrated that the two-part epoxy adhesive fell far short of the strength required. A literature review resulted in several candidate adhesives being selected for lap shear joint testing at room temperature and 398 K, the nominal radiator operating temperature. The results showed that two-part epoxies cured at room and elevated temperatures generally did not perform well. Epoxy film adhesives cured at elevated temperatures, on the other hand, did very well with most being sufficiently strong to cause yielding in the titanium sheet used for the joints. The use of an epoxy primer generally improved the strength of the joint. Based upon these results, a new adhesive was selected for the second subscale radiator section.

  11. Fast WEP-Key Recovery Attack Using Only Encrypted IP Packets

    NASA Astrophysics Data System (ADS)

    Teramura, Ryoichi; Asakura, Yasuo; Ohigashi, Toshihiro; Kuwakado, Hidenori; Morii, Masakatu

    Conventional efficient key recovery attacks against Wired Equivalent Privacy (WEP) require specific initialization vectors or specific packets. Since it takes much time to collect the packets sufficiently, any active attack should be performed. An Intrusion Detection System (IDS), however, will be able to prevent the attack. Since the attack logs are stored at the servers, it is possible to prevent such an attack. This paper proposes an algorithm for recovering a 104-bit WEP key from any IP packets in a realistic environment. This attack needs about 36, 500 packets with a success probability 0.5, and the complexity of our attack is equivalent to about 220 computations of the RC4 key setups. Since our attack is passive, it is difficult for both WEP users and administrators to detect our attack.

  12. The Teacher's Lap--A Site of Emotional Well-Being for the Younger Children in Day-Care Groups

    ERIC Educational Resources Information Center

    Hännikäinen, Maritta

    2015-01-01

    This study focuses on a particular relationship between teachers and one- to three-year-old children: the child in the teacher's lap. When, in what situations, does this happen? Who are the children in the teacher's lap? Why are they there? How do children express emotional well-being when in the teacher's lap? Relational, sociocultural and…

  13. Dynamics of Attosecond Electron Wave Packets

    NASA Astrophysics Data System (ADS)

    Mauritsson, Johan

    2005-05-01

    We present results from some of the first experimental studies of attosecond electron wave packets created via the absorption of ultrashort extreme ultraviolet (XUV) light pulses [1]. The pulses, made via high harmonic generation, form an attosecond pulse train (APT) whose properties we can manipulate by a combination of spatial and spectral filtering. For instance, we show that on-target attosecond pulses of 170 as duration, which is close to the single cycle limit, can be produced [2]. The electron wave packets created when such an APT is used to ionize an atom are different from the tunneling wave packets familiar from strong field ionization. We show how to measure the dynamics of these wave packets in a strong infrared (IR) field, where the absorption of energy above the ionization threshold is found to depend strongly on the APT-IR delay [3]. We also demonstrate that altering the properties of the initial electron wave packet by manipulating the APT changes the subsequent continuum electron dynamics. Finally, we show how the phase of a longer, femtosecond electron wave packet can be modulated by a moderately strong IR pulse with duration comparable to or shorter than that of the electron wave packet. This experiment reveals how the normal ponderomotive shift of an XUV ionization event is modified when the IR pulse is shorter than the XUV pulse.[1] The experiments were done at Lund Institute of Technology, Sweden.[2] R. López-Martens, et al., Phys. Rev. Lett. 94, 033001 (2005)[3] P. Johnsson, et al., submitted to Phys. Rev. Lett.

  14. Owning and Operating a Small Business. A Guide for Industrial Cooperative Training Programs. Learning Activity Package No. 14.

    ERIC Educational Resources Information Center

    Braden, Robert P.; Remzi, Kerim

    This learning activity package (LAP) on starting a small business is designed for student self-study. It will help students learn about their aptitudes and abilities as well as about the basics of running a small business. Following a list of learning objectives, the LAP contains a pretest (answer key provided at the end of the LAP). Ten learning…

  15. All-optical buffering for DPSK packets

    NASA Astrophysics Data System (ADS)

    Liu, Guodong; Wu, Chongqing; Liu, Lanlan; Wang, Fu; Mao, Yaya; Sun, Zhenchao

    2013-12-01

    Advanced modulation formats, such as DPSK, DQPSK, QAM, have become the mainstream technologies in the optical network over 40Gb/s, the DPSK format is the fundamental of all advanced modulation formats. Optical buffers, as a key element for temporarily storing packets in order to synchronization or contention resolution in optical nodes, must be adapted to this new requirement. Different from other current buffers to store the NRZ or RZ format, an all-optical buffer of storing DPSK packets based on nonlinear polarization rotation in SOA is proposed and demonstrated. In this buffer, a section of PMF is used as fiber delay line to maintain the polarization states unchanged, the driver current of SOA is optimized, and no amplifier is required in the fiber loop. A packet delay resolution of 400ns is obtained and storage for tens rounds is demonstrated without significant signal degradation. Using proposed the new tunable DPSK demodulator, bit error rate has been measured after buffering for tens rounds for 10Gb/s data payload. Configurations for First-in First-out (FIFO) buffer or First-in Last-out (FILO) buffer are proposed based on this buffer. The buffer is easy control and suitable for integration. The terminal contention caused by different clients can be mitigated by managing packets delays in future all-optical network, such as optical packet switching network and WDM switching network.

  16. High Angular Momentum Rydberg Wave Packets

    NASA Astrophysics Data System (ADS)

    Wyker, Brendan

    2011-12-01

    High angular momentum Rydberg wave packets are studied. Application of carefully tailored electric fields to low angular momentum, high- n (n ˜ 300) Rydberg atoms creates coherent superpositions of Stark states with near extreme values of angular momentum, ℓ. Wave packet components orbit the parent nucleus at rates that depend on their energy, leading to periods of localization and delocalization as the components come into and go out of phase with each other. Monitoring survival probability signals in the presence of position dependent probing leads to observation of characteristic oscillations based on the composition of the wave packet. The discrete nature of electron energy levels is observed through the measurement of quantum revivals in the wave packet localization signal. Time-domain spectroscopy of these signals allows determination of both the population and phase of individual superposition components. Precise manipulation of wave packets is achieved through further application of pulsed electric fields. Decoherence effects due to background gas collisions and electrical noise are also detailed. Quantized classical trajectory Monte-Carlo simulations are introduced and agree remarkably well with experimental results.

  17. Lapped Block Image Analysis via the Method of Legendre Moments

    NASA Astrophysics Data System (ADS)

    El Fadili, Hakim; Zenkouar, Khalid; Qjidaa, Hassan

    2003-12-01

    Research investigating the use of Legendre moments for pattern recognition has been performed in recent years. This field of research remains quite open. This paper proposes a new technique based on block-based reconstruction method (BBRM) using Legendre moments compared with the global reconstruction method (GRM). For alleviating the blocking artifact involved in the processing, we propose a new approach using lapped block-based reconstruction method (LBBRM). For the problem of selecting the optimal number of moment used to represent a given image, we propose the maximum entropy principle (MEP) method. The main motivation of the proposed approaches is to allow fast and efficient reconstruction algorithm, with improvement of the reconstructed images quality. A binary handwritten musical character and multi-gray-level Lena image are used to demonstrate the performance of our algorithm.

  18. Shoulder-lap seat belts and thoracic transection.

    PubMed

    Byard, R W

    2002-06-01

    While seat belt usage significantly decreases mortality and morbidity from traffic accidents, specific injuries may also occur. Two cases are described in adults where the wearing of three point restraints (shoulder-lap belts) in a serious high-speed vehicle accident resulted in fatal injuries to both a driver and a passenger. 'Mirror image' fractures of the sternum, rib cage and clavicles, with separation of the two halves of the rib cages and underlying trauma to the hearts and thoracic aortae resulted in death in both victims. Profound life-threatening internal injuries may be caused by seat belts in the absence of significant cutaneous injury. The pattern of internal trauma can also be useful in determining whether a seat belt was worn at the time of the accident, and on which side of the vehicle the deceased was sitting.

  19. Testing composite-to-metal tubular lap joints

    SciTech Connect

    Guess, T.R.; Reedy, E.D. Jr.; Slavin, A.M.

    1993-11-01

    Procedures were developed to fabricate, nondestructively evaluate, and mechanically test composite-to-metal tubular joints. The axially loaded tubular lap joint specimen consisted of two metal tubes bonded within each end of a fiberglass composite tube. Joint specimens with both tapered and untapered aluminum adherends and a plain weave E-glass/epoxy composite were tested in tension, compression, and flexure. Other specimens with tapered and untapered steel adherends and a triaxially reinforced E-glass/epoxy composite were tested in tension and compression. Test results include joint strength and failure mode data. A finite element analysis of the axially loaded joints explains the effect of adherend geometry and material properties on measured joint strength. The flexural specimen was also analyzed; calculated surface strains are in good agreement with measured values, and joint failure occurs in the region of calculated peak peel stress.

  20. Testing composite-to-metal tubular lap joints

    NASA Astrophysics Data System (ADS)

    Guess, T. R.; Reedy, E. D., Jr.; Slavin, A. M.

    Procedures were developed to fabricate, nondestructively evaluate, and mechanically test composite-to-metal tubular joints. The axially loaded tubular lap joint specimen consisted of two metal tubes bonded within each end of a fiberglass composite tube. Joint specimens with both tapered and untapered aluminum adherends and a plain weave E-glass/epoxy composite were tested in tension, compression, and flexure. Other specimens with tapered and untapered steel adherends and a triaxially reinforced E-glass/epoxy composite were tested in tension and compression. Test results include joint strength and failure mode data. A finite element analysis of the axially loaded joints explains the effect of adherend geometry and material properties on measured joint strength. The flexural specimen was also analyzed; calculated surface strains are in good agreement with measured values, and joint failure occurs in the region of calculated peak peel stress.

  1. Large-Scale Advanced Prop-Fan (LAP) blade design

    NASA Technical Reports Server (NTRS)

    Violette, John A.; Sullivan, William E.; Turnberg, Jay E.

    1984-01-01

    This report covers the design analysis of a very thin, highly swept, propeller blade to be used in the Large-Scale Advanced Prop-Fan (LAP) test program. The report includes: design requirements and goals, a description of the blade configuration which meets requirements, a description of the analytical methods utilized/developed to demonstrate compliance with the requirements, and the results of these analyses. The methods described include: finite element modeling, predicted aerodynamic loads and their application to the blade, steady state and vibratory response analyses, blade resonant frequencies and mode shapes, bird impact analysis, and predictions of stalled and unstalled flutter phenomena. Summarized results include deflections, retention loads, stress/strength comparisons, foreign object damage resistance, resonant frequencies and critical speed margins, resonant vibratory mode shapes, calculated boundaries of stalled and unstalled flutter, and aerodynamic and acoustic performance calculations.

  2. Lamina Associated Polypeptide 1 (LAP1) Interactome and Its Functional Features

    PubMed Central

    Serrano, Joana B.; da Cruz e Silva, Odete A. B.; Rebelo, Sandra

    2016-01-01

    Lamina-associated polypeptide 1 (LAP1) is a type II transmembrane protein of the inner nuclear membrane encoded by the human gene TOR1AIP1. LAP1 is involved in maintaining the nuclear envelope structure and appears be involved in the positioning of lamins and chromatin. To date, LAP1’s precise function has not been fully elucidated but analysis of its interacting proteins will permit unraveling putative associations to specific cellular pathways and cellular processes. By assessing public databases it was possible to identify the LAP1 interactome, and this was curated. In total, 41 interactions were identified. Several functionally relevant proteins, such as TRF2, TERF2IP, RIF1, ATM, MAD2L1 and MAD2L1BP were identified and these support the putative functions proposed for LAP1. Furthermore, by making use of the Ingenuity Pathways Analysis tool and submitting the LAP1 interactors, the top two canonical pathways were “Telomerase signalling” and “Telomere Extension by Telomerase” and the top functions “Cell Morphology”, “Cellular Assembly and Organization” and “DNA Replication, Recombination, and Repair”. Once again, putative LAP1 functions are reinforced but novel functions are emerging. PMID:26784240

  3. Packet radar spectrum recovery for physiological signals.

    PubMed

    Yavari, Ehsan; Padasdao, Bryson; Lubecke, Victor; Boric-Lubecke, Olga

    2013-01-01

    Packet Doppler radar is investigated for extracting physiological signals. System on Chip is employed as a signal source in packet mode, and it transmits signals intermittently at 2.405 GHz to save power. Reflected signals are demodulated directly by spectral analysis of received pulses in the baseband. Spectral subtraction, using data from an empty room, is applied to extract the periodic movement. It was experimentally demonstrated that frequency of the periodic motion can be accurately extracted using this technique. Proposed approach reduces the computation complexity of the signal processing part effectively. PMID:24110048

  4. Packet Transport Technologies for Optical Networks

    NASA Astrophysics Data System (ADS)

    Lometti, Alberto; Busi, Italo; Grandi, Pietro; Sestito, Vincenzo; Paparella, Andrea

    The purpose of a transport network is to provide a reliable aggregation and transport infrastructure for any client traffic type, in any scale, at the lowest cost per bit. With the growth of packet services, operators are transforming their network infrastructures while looking at reducing capital expenditures and maximizing operational savings. In that scope, new technologies are emerging such as transport multi-protocol label switching and provider backbone transport. This article outlines the state of the art for packet-based transport technologies, comparing them and highlighting the key factors.

  5. Packet radar spectrum recovery for physiological signals.

    PubMed

    Yavari, Ehsan; Padasdao, Bryson; Lubecke, Victor; Boric-Lubecke, Olga

    2013-01-01

    Packet Doppler radar is investigated for extracting physiological signals. System on Chip is employed as a signal source in packet mode, and it transmits signals intermittently at 2.405 GHz to save power. Reflected signals are demodulated directly by spectral analysis of received pulses in the baseband. Spectral subtraction, using data from an empty room, is applied to extract the periodic movement. It was experimentally demonstrated that frequency of the periodic motion can be accurately extracted using this technique. Proposed approach reduces the computation complexity of the signal processing part effectively.

  6. Electromechanical behaviour of REBCO tape lap splices under transverse compressive loading

    NASA Astrophysics Data System (ADS)

    Grether, A.; Scheuerlein, C.; Ballarino, A.; Bottura, L.

    2016-07-01

    We have studied the influence of transverse compressive stress on the resistance and critical current (I c ) of soldered REBCO tape lap splices. Internal contact resistances dominate the overall REBCO lap splice resistances. Application of transverse compressive stress up to 250 MPa during the resistance measurements does not alter the resistance and I c of the soldered REBCO splices that were studied. The resistance of unsoldered REBCO tape lap splices depends strongly on the contact pressure. At a transverse compressive stress of 100 MPa, to which Roebel cables are typically exposed in high field magnets, the crossover splice contact resistance is comparable to the internal tape resistances.

  7. Lumbar Chance fracture associated with use of the lap belt restraint in an adolescent.

    PubMed

    Walsh, A; Sheehan, E; Walsh, M G

    2003-05-01

    The use of the 2-point seat belt or lap belt in motor vehicles, particularly to restrain young rear seat passengers, remains an issue of some concern. The occurrence of lumbar spinal flexion-distraction injuries in lap belt restrained children and adolescents during road traffic accidents is a well known phenomenon, but is still occurring. High velocity paediatric Chance fractures are frequently associated with significant intra-abdominal trauma. We present the case of a Chance fracture sustained by a 15 year old girl, involved in a motor vehicle collision, while wearing a lap belt. We emphasise the need to develop safer seat belt designs for juvenile car passengers.

  8. Seat belt induced transection of the trachea in a child on the lap of an adult.

    PubMed

    Uemura, K; Yoshida, K

    2001-05-01

    As a victim of his parents' suicide, a three-year-old boy was found dead on the lap of the passenger in the left front seat of a car that dove from the wharf and crashed into the sea. He died from the transection of trachea due to shoulder belt in the absence of the signs of drowning. The seat belt paradoxically injured the child on the passenger's lap in the traffic accident. The popular custom of Japanese parents of holding their children on their laps in cars is dangerous, while another custom of killing their children upon suicide of parents or couples should be socially and legally controlled.

  9. Global-Local Finite Element Analysis of Bonded Single-Lap Joints

    NASA Technical Reports Server (NTRS)

    Kilic, Bahattin; Madenci, Erdogan; Ambur, Damodar R.

    2004-01-01

    Adhesively bonded lap joints involve dissimilar material junctions and sharp changes in geometry, possibly leading to premature failure. Although the finite element method is well suited to model the bonded lap joints, traditional finite elements are incapable of correctly resolving the stress state at junctions of dissimilar materials because of the unbounded nature of the stresses. In order to facilitate the use of bonded lap joints in future structures, this study presents a finite element technique utilizing a global (special) element coupled with traditional elements. The global element includes the singular behavior at the junction of dissimilar materials with or without traction-free surfaces.

  10. Machine imparting complex rotary motion for lapping a spherical inner diameter

    DOEpatents

    Carroll, T.A.; Yetter, H.H.

    1985-01-30

    An apparatus for imparting complex rotary motion is used to lap an inner spherical diameter surface of a workpiece. A lapping tool consists of a dome and rod mounted along the dome's vertical axis. The workpiece containing the lapping tool is held in a gimbal which uses power derived from a secondary takeoff means to impart rotary motion about a horizontal axis. The gimbal is rotated about a vertical axis by a take means while mounted at a radially outward position on a rotating arm.

  11. Machine imparting complex rotary motion for lapping a spherical inner diameter

    DOEpatents

    Carroll, Thomas A.; Yetter, Harold H.

    1986-01-01

    An apparatus for imparting complex rotary motion is used to lap an inner spherical diameter surface of a workpiece. A lapping tool consists of a dome and rod mounted along the dome's vertical axis. The workpiece containing the lapping tool is held in a gimbal which uses power derived from a secondary takeoff means to impart rotary motion about a horizontal axis. The gimbal is rotated about a vertical axis by a take means while mounted at a radially outward position on a rotating arm.

  12. The effect of diamond powder characteristics on lapping of sintered silicon carbide

    NASA Astrophysics Data System (ADS)

    Rosczyk, Benjamin; Burkam, Eric; Titov, Artem; Onyenemezu, Clement; Benea, Ion C.

    2015-10-01

    In Automotive applications, sintered Silicon Carbide has been used in applications such as seal pump faces. The surface of sintered SiC, when lapped or polished for sealing to another surface, must be free of blemishes and mechanical defects. Lapping and polishing processes therefore must be well defined and controlled assuring minimal variation and production scrap. In this study, we related the characteristics of different diamond powders (particle size distribution, particle shape and surface) to their performance in lapping of sintered silicon carbide material, expressed as removal rate and surface finish.

  13. All-optical packet header and payload separation for un-slotted optical packet switched networks

    NASA Astrophysics Data System (ADS)

    Ji, Wei; Zhang, Min; Ye, Peida

    2005-11-01

    A novel all-optical header and payload separation technique that can be utilized in un-slotted optical packet switched networks is presented. The technique uses a modified TOAD for packet header extraction with differential modulation scheme and two SOAs that perform a simple XOR operation between the packet and its self-derived header to get the separated payload. The main virtue of this system is simple structure and need not any additional continuous pulses. Through numerical simulations, the operating characteristics of the scheme are illustrated. In addition, the parameters of the system are discussed and designed to optimize the operation performance.

  14. Controllably accelerating and decelerating Airy–Bessel–Gaussian wave packets

    NASA Astrophysics Data System (ADS)

    Deng, Fu; Yu, Weihao; Deng, Dongmei

    2016-11-01

    By solving the (3  +  1)D free-space Schrödinger equation in polar coordinates analytically, we have investigated the propagation of 3D controllably accelerating and decelerating Airy–Bessel–Gaussian (CAiBG) wave packets, even CAiBG wave packets, odd CAiBG wave packets and the superposition of several CAiBG wave packets in free space. The CAiBG wave packets are constructed with the Airy pulses with initial velocity in temporal domain and the Bessel–Gaussian beams in space domain. Due to the initial velocity on Airy pulses, we can obtain decelerating and accelerating Airy–Bessel–Gaussian wave packets by selecting different initial velocities. Moreover, by superposing several CAiBG wave packets, we can obtain the rotating wave packets.

  15. The European Space Agency standard for space packet utilisation

    NASA Technical Reports Server (NTRS)

    Kaufeler, J.-F.; Parkes, A.; Pidgeon, A.

    1993-01-01

    This paper presents the ESA concept for the use of CCSDS defined Telemetry and Telecommand Packets at the application level. These Packets are used to monitor and control remotely a space born application. This concept is defined in a Packet Utilisation Standard (PUS) which should become applicable for all ESA missions using Packets. The production of this standard is under the responsibility of an ESA standardization group called 'COES'.

  16. Biological Diversity. Global Issues Education Packet.

    ERIC Educational Resources Information Center

    Holm, Amy E.

    Biological diversity, also commonly called genetic diversity, refers to the variety of organisms on Earth. Scientists are concerned that many species will become extinct because of extensive development in the tropical regions. This packet is designed to increase student's awareness about direct and indirect causes of extinction, endangered…

  17. Metro College for Living. Workshop Packet.

    ERIC Educational Resources Information Center

    Kreps, Alice Roelofs

    This packet contains information and materials for conducting a training workshop for working with adults who are developmentally disabled. The materials are specifically designed to train volunteer teachers in the College for Living (CFL) program, which supplements residential programs in and around Denver and aids institutions in orienting…

  18. Resource Packet on Disability, Spirituality, and Healing.

    ERIC Educational Resources Information Center

    Lane, Nancy

    This resource packet includes information relating to the inclusion of people with disabilities in the Christian church. The first article, "Changing Attitudes, Creating Awareness," highlights several critical areas where churches can begin to understand the barriers of exclusion to people with disabilities. The following article, "Victim…

  19. The World Around You. Environmental Education Packet.

    ERIC Educational Resources Information Center

    Garden Club of America, New York, NY.

    The Garden Club of America has compiled this environmental education packet of informational materials to help teachers educate their students for survival. The "Study Guide" contains essays by ten authorities on topics of population, soil, air, water, power and energy, solid waste management, open space, public lands, oceans, and wildlife. Each…

  20. Passive analysis technique for packet link performance

    NASA Astrophysics Data System (ADS)

    Fairhurst, G.; Wan, P. S.

    1993-01-01

    The performance of a bearer link is usually assessed by bit error rate (BER) tests or measurement of the error free seconds (EFS). These require exclusive access to the link. An alternative technique is presented that measures performance by passive observation of the frames passing over a packet link. This may be used to estimate the performance of the link.

  1. [Alum Rock Voucher Project. Information Packet.

    ERIC Educational Resources Information Center

    Alum Rock Union Elementary School District, San Jose, CA.

    This packet contains (1) informational booklets for parents in the Alum Rock Union Elementary School District, (2) a booklet on the pros and cons of a voucher system, (3) promotional material, (4) a progress report on the project, (5) the project proposal to OEO, and (6) a sample school and program preferences form. The program, according to the…

  2. A characterization of the LAP Aquarius Phantom for external LAP laser alignment and magnetic resonance geometric distortion verification for stereotactic radiation surgery patient simulation

    NASA Astrophysics Data System (ADS)

    Vergara, Daniel

    The Thesis explores additional applications of LAP's Aquarius external laser alignment verification Phantom by examining geometric accuracy of magnetic resonance images commonly used for planning intracranial stereotactic radiation surgery (ICSRS) cases. The scans were performed with MRI protocols used for ICSRS, and head and neck diagnosis, and their images fused to computerized tomographic (CT) images. The geometric distortions (GDs) were measured against the CT in all axial, sagittal, and coronal directions at different levels. Using the Aquarius Phantom, one is able to detect GD in ICSRS planning MRI acquisitions, and align the external LAP patient alignment lasers, by following the LAP QA protocol. GDs up to about 2 mm are observed at the distal regions of the longitudinal axis in the SRS treatment planning MR images. Based on the results, one may recommend the use of the Aquarius Phantom to determine if margins should be included for SRS treatment planning.

  3. Alteration of Sulphides in the Rumuruti Chondrite La Paz Icefield (LAP) 031275

    NASA Astrophysics Data System (ADS)

    Steer, E. D.; Treiman, A. H.

    2014-09-01

    Pyrrhotite in LAP 03175 (R5) has altered to a fine-grained mineral mixture. New data (optical, chemical, and Raman) suggest the mixture includes violarite and tochilinite, but not (as suggested earlier) graphite, hematite, and/or jarosite.

  4. Electroencephalography data analysis by using discrete wavelet packet transform

    NASA Astrophysics Data System (ADS)

    Karim, Samsul Ariffin Abdul; Ismail, Mohd Tahir; Hasan, Mohammad Khatim; Sulaiman, Jumat; Muthuvalu, Mohana Sundaram; Janier Josefina, B.

    2015-05-01

    Electroencephalography (EEG) is the electrical activity generated by the movement of neurons in the brain. It is categorized into delta waves, theta, alpha, beta and gamma. These waves exist in a different frequency band. This paper is a continuation of our previous research. EEG data will be decomposed using Discrete Wavelet Packet Transform (DWPT). Daubechies wavelets 10 (D10) will be used as the basic functions for research purposes. From the main results, it is clear that the DWPT able to characterize the EEG signal corresponding to each wave at a specific frequency. Furthermore, the numerical results obtained better than the results using DWT. Statistical analysis support our main findings.

  5. Television Compression Algorithms And Transmission On Packet Networks

    NASA Astrophysics Data System (ADS)

    Brainard, R. C.; Othmer, J. H.

    1988-10-01

    Wide-band packet transmission is a subject of strong current interest. The transmission of compressed TV signals over such networks is possible with any quality level. There are some specific advantages in using packet networks for TV transmission. Namely, any fixed data rate can be chosen, or a variable data rate can be utilized. However, on the negative side packet loss must be considered and differential delay in packet arrival must be compensated. The possibility of packet loss has a strong influence on compression algorithm choice. Differential delay of packet arrival is a new problem in codec design. Some issues relevant to mutual design of the transmission networks and compression algorithms will be presented. An assumption is that the packet network will maintain packet sequence integrity. For variable-rate transmission, a reasonable definition of peak data rate is necessary. Rate constraints may be necessary to encourage instituting a variable-rate service on the networks. The charging algorithm for network use will have an effect on selection of compression algorithm. Some values of and procedures for implementing packet priorities are discussed. Packet length has only a second-order effect on packet-TV considerations. Some examples of a range of codecs for differing data rates and picture quality are given. These serve to illustrate sensitivities to the various characteristics of packet networks. Perhaps more important, we talk about what we do not know about the design of such systems.

  6. On the water lapping of felines and the water running of lizards: A unifying physical perspective.

    PubMed

    Aristoff, Jeffrey M; Stocker, Roman; Reis, Pedro M; Jung, Sunghwan

    2011-03-01

    We consider two biological phenomena taking place at the air-water interface: the water lapping of felines and the water running of lizards. Although seemingly disparate motions, we show that they are intimately linked by their underlying hydrodynamics and belong to a broader class of processes called Froude mechanisms. We describe how both felines and lizards exploit inertia to defeat gravity, and discuss water lapping and water running in the broader context of water exit and water entry, respectively.

  7. ZooScope. Teacher's Packet.

    ERIC Educational Resources Information Center

    Henrie, Charis

    This curriculum provides background information and activities for teaching inquiry-based science in the classroom and at the Oregon Zoo. The ZooScope program was created to provide students with hands-on and minds-on activities that are crucial to taking theoretical learning into the real world. The hope is that as students begin asking about the…

  8. Drug Courts. Technical Assistance Packet.

    ERIC Educational Resources Information Center

    Join Together, Boston, MA.

    Drug courts are designed to stop the abuse of alcohol and other drugs and the related criminal activity by offering individuals, whose criminal activity stems from substance abuse, the choice to participate in treatment. In exchange for successful completion of a treatment program, the court has the option of dismissing the original charge,…

  9. Composition of matrix in the CR chondrite LAP 02342

    NASA Astrophysics Data System (ADS)

    Wasson, John T.; Rubin, Alan E.

    2009-03-01

    We report evidence of interchondrule matrix heterogeneity on a scale of ˜50 μm in the well-preserved CR2 chondrite LAP 02342. Despite minor effects resulting from asteroidal aqueous alteration, the matrix in this CR chondrite seems to preserve much of the compositional record of nebular fines. We carried out electron-microprobe studies using a 3-μm-diameter beam; we analyzed 10 elements in 36- or 49-point grids on 11 ca. 50 × 50-μm rectangular areas of matrix. Each grid area has a distinct composition, inconsistent with a simple model of matrix material having a uniform composition throughout the nebular formation region of the CR chondrites. On S-Fe, Mg-Si, K-Na and K-Al scatter diagrams, the grid areas (i.e., different matrix patches) are largely separated from each other; plots of means with 95% confidence limits demonstrate that the compositions are resolvable. Five matrix areas were analyzed again in duplicate runs; excellent agreement was observed between duplicate studies. LAP 02342 experienced two forms of mild aqueous alteration - as patchy enrichments in Ca (inferred to reflect CaCO 3) and as regions in which sulfide laths are embedded within phyllosilicates. Despite this evidence of aqueous transport, the effect on the composition of matrix is not resolvable. For example, matrix points that were adjacent to points with high CaCO 3 contents show elemental concentrations similar to those in regions having only one or two points with a Ca enrichment. It appears that secondary minerals are found in areas where there are suitable precursor phases and voids into which new phases could grow unimpeded. Calcium appears to be unique in forming a phase that greatly lowers the Ca ++ content of the aqueous medium, thus enhancing the rate of diffusion. Because chondrules vary widely in bulk composition, the formation of chondrules in small sets (100 or less) could generate "smoke" and mesostasis spray with compositions unique to each set. However, if these

  10. Transcriptional regulation of miR-146b by C/EBPβ LAP2 in esophageal cancer cells

    SciTech Connect

    Li, Junxia; Shan, Fabo; Xiong, Gang; Wang, Ju-Ming; Wang, Wen-Lin; Xu, Xueqing; Bai, Yun

    2014-03-28

    Highlights: • MiR-146b promotes esophageal cancer cell proliferation. • MiR-146b inhibits esophageal cancer cell apoptosis. • C/EBPβ directly binds to miR-146b promoter conserved region. • MiR-146b is up-regulated by C/EBPβ LAP2 transcriptional activation. - Abstract: Recent clinical study indicated that up-regulation of miR-146b was associated with poor overall survival of patients in esophageal squamous cell carcinoma. However, the underlying mechanism of miR-146b dysregulation remains to be explored. Here we report that miR-146b promotes cell proliferation and inhibits cell apoptosis in esophageal cancer cell lines. Mechanismly, two C/EBPβ binding motifs are located in the miR-146b promoter conserved region. Among the three isoforms of C/EBPβ, C/EBPβ LAP2 positively regulated miR-146b expression and increases miR-146b levels in a dose-dependent manner through transcription activation of miR-146b gene. Together, these results suggest a miR-146b regulatory mechanism involving C/EBPβ, which may contribute to the up-regulation of miR-146b in esophageal squamous cell carcinoma.

  11. A Study of the Earth: "Everything Comes from Our Natural Resources." Teacher's Helper Packet.

    ERIC Educational Resources Information Center

    Mineral Information Inst., Denver, CO.

    This instructional information packet had been prepared to help teachers plan lessons and activities related to natural resources. It contains posters, activity sheets, teacher guides, student pages, background and study sheets, video and reading lists, free video offers, and sources for more information. (JRH)

  12. SCDC Spanish Curricula Units. Fine Arts, Unit 4, Grade 2, Supplements & Ditto Packet.

    ERIC Educational Resources Information Center

    Spanish Curricula Development Center, Miami Beach, FL.

    The supplement and ditto packet to the unit four fine arts strand for second graders contains visual materials to aid the teacher in carrying out the instructional and assessment activities of this strand. Seatwork for individual students is featured along with materials intended for class participation activities. Illustrations, provided to help…

  13. SCDC Spanish Curricula Units. Language Arts, Unit 6, Grade 2, Supplement & Ditto Packet.

    ERIC Educational Resources Information Center

    Spanish Curricula Development Center, Miami Beach, FL.

    The supplement and ditto packet for the unit six language arts strand for second graders features visual aids to help carry out the activities described in the teacher's guide. Visuals based on the stories are used to help stimulate oral language and conceptual development along with class participation activities and written work. Other materials…

  14. SCDC Spanish Curricula Units. Fine Arts Strand, Unit 9, Grade 3, Supplement & Ditto Packet.

    ERIC Educational Resources Information Center

    Spanish Curricula Development Center, Miami Beach, FL.

    The supplement and ditto packet to the fine arts strand of unit nine for third graders contains illustrations, ditto masters, and four songbooks to help the teacher carry out the fine arts activities of this unit. Materials for both group activities and seatwork are included. Kit 33 uses the songbook "Canciones de Aqui y de Alla" and studies the…

  15. Effect of Coulomb interaction on multi-electronwave packet dynamics

    SciTech Connect

    Shiokawa, T.; Takada, Y.; Konabe, S.; Hatsugai, Y.; Muraguchi, M.; Endoh, T.; Shiraishi, K.

    2013-12-04

    We have investigated the effect of Coulomb interaction on electron transport in a one-dimensional nanoscale structure using a multi-electron wave packet approach. To study the time evolution, we numerically solve the time-dependent Hartree-Fock equation, finding that the electron wave packet dynamics strongly depends on the Coulomb interaction strength. When the Coulomb interaction is large, each electron wave packet moves separately in the presence of an electric field. With weak Coulomb interaction, however, the electron wave packets overlap, forming and moving as one collective wave packet.

  16. Fatigue strength of a single lap joint SPR-bonded

    SciTech Connect

    Di Franco, G.; Fratini, L.; Pasta, A.

    2011-05-04

    In the last years, hybrid joints, meaning with this the joints which consist in combining a traditional mechanical joint to a layer of adhesive, are gradually attracting the attention of various sectors of the construction of vehicles and transportation industries, for their better performance compared to just mechanical joints (self-piercing riveting SPR, riveting, and so on) or just to bonded joints.The paper investigates the fatigue behavior of a single lap joint self-piercing riveted (SPR) and bonded throughout fatigue tests. The considered geometric configuration allowed the use of two rivets placed longitudinally; an epoxy resin was used as adhesive. In the first part of the work static characterization of the joints was carried out through tensile tests. Then fatigue tests were made with the application of different levels of load. The fatigue curves were also obtained at the varying the distance between the two rivets in order to better assess the joint strength for a given length of overlap.

  17. Molten pool characterization of laser lap welded copper and aluminum

    NASA Astrophysics Data System (ADS)

    Xue, Zhiqing; Hu, Shengsun; Zuo, Di; Cai, Wayne; Lee, Dongkyun; Elijah, Kannatey-Asibu, Jr.

    2013-12-01

    A 3D finite volume simulation model for laser welding of a Cu-Al lap joint was developed using ANSYS FLUENT to predict the weld pool temperature distribution, velocity field, geometry, alloying element distribution and transition layer thickness—all key attributes and performance characteristics for a laser-welded joint. Melting and solidification of the weld pool was simulated with an enthalpy-porosity formulation. Laser welding experiments and metallographic examination by SEM and EDX were performed to investigate the weld pool features and validate the simulated results. A bowl-shaped temperature field and molten pool, and a unique maximum fusion zone width were observed near the Cu-Al interface. Both the numerical simulation and experimental results indicate an arch-shaped intermediate layer of Cu and Al, and a gradual transition of Cu concentration from the aluminum plate to the copper plate with high composition gradient. For the conditions used, welding with Cu on top was found to result in a better weld joint.

  18. Spin Models for Packet Routing Control in Computer Networks

    NASA Astrophysics Data System (ADS)

    Horiguchi, T.

    We investigate packet flow in computer networks within the framework of statistical physics by using numerical simulations. As mathematical models for packet routing, we present a spin model with lattice gas spins and the one with Ising spins. Then we propose dynamic programming for optimal routing control of packet flow by using the two spin models. This is a kind of goal-directed learning for taking into account of time-dependent environment for the packets. Next we investigate a congestion problem by using the model with lattice gas spins when the packets are not sent to nodes at which their buffers are already full up with packets. Since we have found serious congestion in the packet flow, we then propose reinforcement learning for avoiding the congestion and have performed simulations on several networks including small world networks, scale free networks and so on.

  19. Apoptosis in the lens anlage of the heritable lens aplastic mouse (lap mouse).

    PubMed

    Aso, S; Tashiro, M; Baba, R; Sawaki, M; Noda, S; Fujita, M

    1998-08-01

    Adult homozygous lap mice show various eye abnormalities, such as aphakia, retinal disorganization, and dysplasia of the cornea and anterior chamber. In the fetal eye of a homozygous lap mouse, the lens placode seems to develop normally. However, the lens vesicle progresses abnormally to form a mass of cells without a cavity, and the mass vanishes soon afterward. We examined cell death in the lens anlage of this mutant. The lens anlagen of homozygous lap and normal mice from days 10 to 12 of gestation were observed by light microscopy after DNA end-labeling by immunohistochemistry and by transmission electron microscopy. By light microscopy, a slight frequency of cell death was detected in the lens anlage encircling the surface ectoderm and in the anlage or in the anlage of both homozygous lap mice and normal mice at day 10 of gestation. Cell death was seen in the lens anlage encircling the surface ectoderm in the normal mouse and sporadically in the anlage of the homozygous lap mouse at day 10.5 of gestation. Cell death was visible at the area of the lens vesicle attached to the surface ectoderm and encircling the surrounding surface ectoderm in the normal mouse, and in the lens anlage encircling the surface ectoderm and the apex areas of the lens anlage in the homozygous lap mouse at day 11 of gestation. At day 12 of gestation, almost no cell death was observed in the lens anlage of the normal mouse. However, extensive areas of cell death were still seen in the lens anlage at its apex, at the inner region, and encircling the surface ectoderm in the homozygous lap mouse. Electron microscopic observation showed that the dead cells observed in the lens anlagen by light microscopy in normal and lap mice are the result of apoptosis. In lap mice, cells with cytoplasmic condensation were observed mainly at days 10 and 10.5 of gestation. Many apoptotic bodies which had been phagocytosed by adjacent cells were seen predominantly at day 11 of gestation. At day 12 of

  20. Wavelet packet entropy for heart murmurs classification.

    PubMed

    Safara, Fatemeh; Doraisamy, Shyamala; Azman, Azreen; Jantan, Azrul; Ranga, Sri

    2012-01-01

    Heart murmurs are the first signs of cardiac valve disorders. Several studies have been conducted in recent years to automatically differentiate normal heart sounds, from heart sounds with murmurs using various types of audio features. Entropy was successfully used as a feature to distinguish different heart sounds. In this paper, new entropy was introduced to analyze heart sounds and the feasibility of using this entropy in classification of five types of heart sounds and murmurs was shown. The entropy was previously introduced to analyze mammograms. Four common murmurs were considered including aortic regurgitation, mitral regurgitation, aortic stenosis, and mitral stenosis. Wavelet packet transform was employed for heart sound analysis, and the entropy was calculated for deriving feature vectors. Five types of classification were performed to evaluate the discriminatory power of the generated features. The best results were achieved by BayesNet with 96.94% accuracy. The promising results substantiate the effectiveness of the proposed wavelet packet entropy for heart sounds classification.

  1. A packet switched communications system for GRO

    NASA Astrophysics Data System (ADS)

    Husain, Shabu; Yang, Wen-Hsing; Vadlamudi, Rani; Valenti, Joseph

    1993-11-01

    This paper describes the packet switched Instrumenters Communication System (ICS) that was developed for the Command Management Facility at GSFC to support the Gamma Ray Observatory (GRO) spacecraft. The GRO ICS serves as a vital science data acquisition link to the GRO scientists to initiate commands for their spacecraft instruments. The system is ready to send and receive messages at any time, 24 hours a day and seven days a week. The system is based on X.25 and the International Standard Organization's (ISO) 7-layer Open Systems Interconnection (OSI) protocol model and has client and server components. The components of the GRO ICS are discussed along with how the Communications Subsystem for Interconnection (CSFI) and Network Control Program Packet Switching Interface (NPSI) software are used in the system.

  2. Steering attosecond electron wave packets with light.

    PubMed

    Kienberger, R; Hentschel, M; Uiberacker, M; Spielmann, Ch; Kitzler, M; Scrinzi, A; Wieland, M; Westerwalbesloh, Th; Kleineberg, U; Heinzmann, U; Drescher, M; Krausz, F

    2002-08-16

    Photoelectrons excited by extreme ultraviolet or x-ray photons in the presence of a strong laser field generally suffer a spread of their energies due to the absorption and emission of laser photons. We demonstrate that if the emitted electron wave packet is temporally confined to a small fraction of the oscillation period of the interacting light wave, its energy spectrum can be up- or downshifted by many times the laser photon energy without substantial broadening. The light wave can accelerate or decelerate the electron's drift velocity, i.e., steer the electron wave packet like a classical particle. This capability strictly relies on a sub-femtosecond duration of the ionizing x-ray pulse and on its timing to the phase of the light wave with a similar accuracy, offering a simple and potentially single-shot diagnostic tool for attosecond pump-probe spectroscopy.

  3. Particlelike wave packets in complex scattering systems

    NASA Astrophysics Data System (ADS)

    Gérardin, Benoît; Laurent, Jérôme; Ambichl, Philipp; Prada, Claire; Rotter, Stefan; Aubry, Alexandre

    2016-07-01

    A wave packet undergoes a strong spatial and temporal dispersion while propagating through a complex medium. This wave scattering is often seen as a nightmare in wave physics whether it be for focusing, imaging, or communication purposes. Controlling wave propagation through complex systems is thus of fundamental interest in many areas, ranging from optics or acoustics to medical imaging or telecommunications. Here, we study the propagation of elastic waves in a cavity and a disordered waveguide by means of laser interferometry. From the direct experimental access to the time-delay matrix of these systems, we demonstrate the existence of particlelike wave packets that remain focused in time and space throughout their complex trajectory. Due to their limited dispersion, their selective excitation will be crucially relevant for all applications involving selective wave focusing and efficient information transfer through complex media.

  4. Teleportation of nonclassical wave packets of light.

    PubMed

    Lee, Noriyuki; Benichi, Hugo; Takeno, Yuishi; Takeda, Shuntaro; Webb, James; Huntington, Elanor; Furusawa, Akira

    2011-04-15

    We report on the experimental quantum teleportation of strongly nonclassical wave packets of light. To perform this full quantum operation while preserving and retrieving the fragile nonclassicality of the input state, we have developed a broadband, zero-dispersion teleportation apparatus that works in conjunction with time-resolved state preparation equipment. Our approach brings within experimental reach a whole new set of hybrid protocols involving discrete- and continuous-variable techniques in quantum information processing for optical sciences.

  5. Packet theory of conditioning and timing.

    PubMed

    Kirkpatrick, Kimberly

    2002-04-28

    Packet theory is based on the assumption that the momentary probability of producing a bout or packet of responding is controlled by the conditional expected time function. Bouts of head entry responses of rats into a food cup appear to have the same characteristics across a range of conditions. The conditional expected time function is the mean expected time remaining until the next food delivery as a function of time since an event such as food or stimulus onset. The conditional expected time function encodes mean interval duration as well as the distribution form so that both the mean response rate and form of responding in time can be predicted. Simulations of Packet theory produced accurate quantitative predictions of: (1) the effect of reinforcement density (mean food-food interval) and distribution form on responding; (2) scalar variance in fixed interval responding; (3) CS-US and intertrial interval effects on the strength of conditioning; and (4) the effect of the ratio of cycle:trial time on the strength of conditioning.

  6. BAG (Continuous Round Robin Packet Capture)

    SciTech Connect

    Wood, C. Philip

    2006-03-10

    Bag is a miniature pcap filter which takes pcap input (or input off the wire) using a bpf filter, if specified, and then writes the output to stdout or a file (in pcap format). It depends for some aspects of its functionality on a libpcap library which uses a shared memory packet capture ring bugger. There are two build in modules: chcksum and session. the build in chcksum modules is used to anonymize the ip addresses and repair any checksums in the stream. % bag -r /tmp/*.pcap -Cchucksum, 128.1 65: 10.10 The session module generates sessions which are defined as a series of packets that have two things in common. the first is a unique five-tuple composed oi an IP protocol, IP source address, IP source port, IP destination address, and IP destination port. The second is that if the originating packet is associated with a bi-directional service such as ftpltcp, characteristics and data will be kept for both flows involved with the service. The only protocols evaluated beyond the IP header are ICMP, TCP and UDP. A session can last for as long as bag is running. However, under normal conditions, sessions are generated every time they appear to have closed down. There is a man page included with the distribution which goes into more detail.

  7. BAG (Continuous Round Robin Packet Capture)

    2006-03-10

    Bag is a miniature pcap filter which takes pcap input (or input off the wire) using a bpf filter, if specified, and then writes the output to stdout or a file (in pcap format). It depends for some aspects of its functionality on a libpcap library which uses a shared memory packet capture ring bugger. There are two build in modules: chcksum and session. the build in chcksum modules is used to anonymize the ipmore » addresses and repair any checksums in the stream. % bag -r /tmp/*.pcap -Cchucksum, 128.1 65: 10.10 The session module generates sessions which are defined as a series of packets that have two things in common. the first is a unique five-tuple composed oi an IP protocol, IP source address, IP source port, IP destination address, and IP destination port. The second is that if the originating packet is associated with a bi-directional service such as ftpltcp, characteristics and data will be kept for both flows involved with the service. The only protocols evaluated beyond the IP header are ICMP, TCP and UDP. A session can last for as long as bag is running. However, under normal conditions, sessions are generated every time they appear to have closed down. There is a man page included with the distribution which goes into more detail.« less

  8. Resilient packet ring media access protocol

    NASA Astrophysics Data System (ADS)

    Thepot, Frederic

    2001-07-01

    The discussion will cover the new initiative to create a new MAC layer standard for resilient packet rings: IEEE 802.17 RPR. The key aspects of the presentation will include a preliminary address of the Metro Area Network today and the current networking technologies such as SONET/SDH which are not optimized to carry IP traffic over Metro MAN. The next segment will cover the options which could change the traditional and expensive layered networking model, and address the real benefits of marrying several technologies like Ethernet, SONET/SDH and IP into one technology. The next part of the discussion will detail the technical advantages a new MAC will bring to the services providers. Lastly a summary of the view and strategy about the acceptance and deployment of this new technology in the next 12 months, specifically, now one defines and develops standards for a Resilient Packet Ring Access Protocol for use in Local, Metropolitan, and Wide Area Networks for transfer of data packets at rates scalable to multiple gigabits per second; specifically address the data transmission requirements of carriers that have present and planned fiber optic physical infrastructure in a ring topology; and, defining and developing detailed specifications for using existing and/or new physical layers at appropriate data rates that will support transmission of this access protocol.

  9. Marketing and Distributive Education Curriculum Development Report. Final Report from December 31, 1981 to June 30, 1982.

    ERIC Educational Resources Information Center

    Florida Atlantic Univ., Boca Raton.

    A project developed 10 learning activity packets (LAPs)--3 for Recreation/Tourism and 7 for Human Relations Skills. These LAPs were for use in high schools, vocational-technical centers, and community colleges and for teacher preservice and inservice staff development activities. The LAPs were produced by a team of Marketing and Distributive…

  10. This Is Challenger Center...Changing the Way Teachers Teach and Students Learn. [Information Packet].

    ERIC Educational Resources Information Center

    Challenger Center for Space Science Education, Alexandria, VA.

    The Challenger Center for Space Science Education is a not-for-profit educational organization founded in 1986 following the Challenger 51-L space shuttle tragedy. This packet contains a variety of separate sheets and brochures providing information about the activities of the Challenger Center. Challenger Learning Centers provide hands-on,…

  11. Learning Packet in Social Studies (8th Grade) for ESOL Students.

    ERIC Educational Resources Information Center

    Clemons, Jacquelyn; And Others

    The learning packet is intended to provide the eighth grade social studies teacher with supplemental material for teaching beginning and intermediate students of English as a second language. It contains a variety of activities to assist in developing the student's vocabulary skills, reading comprehension, writing skills, and a working knowledge…

  12. SCDC Spanish Curricula Units. Science/Math Strand, Unit 3, Grade One, Supplement & Ditto Packet.

    ERIC Educational Resources Information Center

    Spanish Curricula Development Center, Miami Beach, FL.

    Instructional aids and ditto masters for unit three of a science/math curriculum in Spanish for first graders are included in this supplement and ditto packet. Encompassing kits 9-12, these materials are designed for use with learning activities referred to in the teacher's guide corresponding to this unit. Illustrations and materials for both…

  13. SCDC Spanish Curricula Units. Science/Math Strand, Unit 9, Grade 3, Supplement & Ditto Packet.

    ERIC Educational Resources Information Center

    Spanish Curricula Development Center, Miami Beach, FL.

    Designed to help the teacher in presenting the material of unit nine's science-math strand for third graders, this supplement and ditto packet contains both group visual aids and seatwork activities for individual students. Notations in the teacher's guide indicate when the supplementary materials should be used. Concepts explored in the four kits…

  14. Plant Galls and Ecological Concepts: A Multidisciplinary Outdoor Education Teaching Resource Packet.

    ERIC Educational Resources Information Center

    Matthews, Bruce; And Others

    Designed for adaptation in primary through high school classes, the lessons in this resource packet use the development of plant galls (plant growths caused by irritation of the plant tissue) as a focus for outdoor education studies and activities. Emphasis is on science and ecology, though other disciplines are represented. Illustrations and…

  15. Transitions: Turning Risks into Opportunities for Student Support. An Introductory Packet.

    ERIC Educational Resources Information Center

    California Univ., Los Angeles. Center for Mental Health in Schools.

    This Introductory Packet provides readings and related activities on support for transitions to address barriers to student learning covering both research and best practices. It explores why transitions are dangerous opportunities that can disrupt or promote development. Key transitions and related intervention strategies are presented for…

  16. When I Was Hungry. A Hunger Course for High School Students. Teacher's Manual [and] Action Packet.

    ERIC Educational Resources Information Center

    Bread for the World Educational Fund, Washington, DC.

    Designed to accompany a student activity packet on issues related to world hunger, this teacher's manual provides 12 units of study at the high school level. Materials are presented from a Christian perspective. The following topics are covered in separate chapters: introduction (justice and the right to food), the dimensions and scope of the…

  17. Schools Are for All Kids. Part II: School Site Implementation. Trainer's Packet.

    ERIC Educational Resources Information Center

    Roger, Blair; And Others

    This trainer's packet, designed to be used in conjunction with the participant's manual, was prepared for a 2-day workshop to restructure schools to embrace all children, including those with disabilities. The trainer's materials include: program objectives; masters for overhead transparencies; and descriptions of learning activities, including…

  18. Intermediate SCDC Spanish Curricula Units. Spanish SL, Unit 1, Kits 1-4, Supplement & Ditto Packet.

    ERIC Educational Resources Information Center

    Spanish Curricula Development Center, Miami Beach, FL.

    Designed for use with the teacher's guide to the Spanish as a Second Language unit, this supplement and ditto packet includes visual aids and worksheets to help the teacher carry out the instructional and assessment activities. The illustrations are designed to help stimulate oral language and conceptual development. These visual materials…

  19. Large-scale Advanced Prop-fan (LAP) high speed wind tunnel test report

    NASA Technical Reports Server (NTRS)

    Campbell, William A.; Wainauski, Harold S.; Arseneaux, Peter J.

    1988-01-01

    High Speed Wind Tunnel testing of the SR-7L Large Scale Advanced Prop-Fan (LAP) is reported. The LAP is a 2.74 meter (9.0 ft) diameter, 8-bladed tractor type rated for 4475 KW (6000 SHP) at 1698 rpm. It was designated and built by Hamilton Standard under contract to the NASA Lewis Research Center. The LAP employs thin swept blades to provide efficient propulsion at flight speeds up to Mach .85. Testing was conducted in the ONERA S1-MA Atmospheric Wind Tunnel in Modane, France. The test objectives were to confirm that the LAP is free from high speed classical flutter, determine the structural and aerodynamic response to angular inflow, measure blade surface pressures (static and dynamic) and evaluate the aerodynamic performance at various blade angles, rotational speeds and Mach numbers. The measured structural and aerodynamic performance of the LAP correlated well with analytical predictions thereby providing confidence in the computer prediction codes used for the design. There were no signs of classical flutter throughout all phases of the test up to and including the 0.84 maximum Mach number achieved. Steady and unsteady blade surface pressures were successfully measured for a wide range of Mach numbers, inflow angles, rotational speeds and blade angles. No barriers were discovered that would prevent proceeding with the PTA (Prop-Fan Test Assessment) Flight Test Program scheduled for early 1987.

  20. Evaluation of pediatric use patterns and performance of lap shoulder belt systems in the center rear.

    PubMed

    Arbogast, Kristy B; Durbin, Dennis R; Kallan, Michael J; Winston, Flaura K

    2004-01-01

    Lap and shoulder belts have been required in rear outboard positions since 1989. A recent congressional mandate encouraged the requirement of a lap and shoulder belt in the center rear seat position. This study utilized Data from the Partners for Child Passenger Safety study, a large-scale child-focused crash surveillance system, to quantify changes in seating patterns for children in vehicles that already have this feature compared to those which do not and measured the safety benefit associated with the provision of a shoulder belt in the center rear seat position. The data demonstrate that the presence of a shoulder belt in the center rear seating position influences seating practices only when there is a single child occupant in the vehicle. Belted children in the center rear of vehicles equipped with a lap shoulder belt are at an 81% reduction in risk of injury than those belted in the center rear equipped with a lap only belt. The data suggest that by requiring lap shoulder belts in the center rear, benefits would be realized to belted children, specifically the 4-8 year old group.

  1. Application of the lag-after-pulsed-separation (LAPS) flow meter to different protein solutions.

    PubMed

    Sengupta, Shramik; Mahmud, Goher; Chiou, Daniel J; Ziaie, Babak; Barocas, Victor H

    2005-02-01

    A lag after pulsed separation (LAPS) meter was previously developed to measure flow rates of protein solutions. The LAPS meter operates on the time-of-flight principle. An upstream event (electrophoretic concentration of the particles in one section of the device) is detected downstream (by change in ac resistance). The time lag between the event and its detection is inversely proportional to the fluid flow rate. We demonstrate the ability of the LAPS meter to measure the flow rate of solutions containing one or more charged biomacromolecules or particles. A prototype of the LAPS meter was used to measure flow rates of solutions of model proteins [bovine serum albumin (BSA), lysozyme and hemoglobin] and mixtures of BSA and lysozyme. Flow rates of 10-50 microl min(-1)(average velocities of 0.24-1.2 mm s(-1)) were measured. When a single ac measurement was used, the results were solution-dependent, which we attribute to the interface between the protein solution and the ac electrodes. A differential mode, in which the signal from a positive and a negative dc pulse were subtracted from each other, eliminated interfacial effects and led to a single universal (solution-independent) calibration curve. The LAPS meter can be used as a non-invasive, no-moving-parts flow sensor in any microfluidic system (such as drug delivery devices or micro-reactor arrays) where one needs to measure the flow rate of a solution or a suspension containing charged species such as proteins or cells.

  2. Microwave Ionization of an Atomic Electron Wave Packet

    SciTech Connect

    Noel, Michael W.; Ko, Lung; Gallagher, T. F.

    2001-07-23

    A short microwave pulse is used to ionize a lithium Rydberg wave packet launched from the core at a well-defined phase of the field. We observe a strong dependence on the relative phase between the motion of the wave packet and the oscillations of the field. This phase dependent ionization is also studied as a function of the relative frequency. Our experimental observations are in good qualitative agreement with a one-dimensional classical model of wave packet ionization.

  3. Lap belt iliac wing fracture: a predictor of bowel injury in children.

    PubMed

    Emery, Kathleen H

    2002-12-01

    Lap belt restraints in motor vehicle collisions have been associated with a variety of injuries, mainly bowel and lumbar spine. Cephalad positioning of the belt over the intended position across the anterior superior iliac spines (which typically occurs in younger children) is thought to be responsible for the observed bowel injuries. We report two pediatric patients, both restrained by lap belts in high-speed collisions, who suffered iliac wing fractures in addition to bowel injuries. Unexplained free peritoneal fluid was the sole CT finding in one patient (a teenage girl) who had a delay in diagnosis of bowel perforation. These cases illustrate the high frequency of bowel injury in pediatric patients with iliac wing fractures associated with lap belt use.

  4. Measurements of fuselage skin strains and displacements near a longitudinal lap joint in a pressurized aircraft

    NASA Technical Reports Server (NTRS)

    Phillips, Edward P.; Britt, Vicki O.

    1991-01-01

    Strains and displacements in a small area near a longitudinal lap joint in the fuselage skin of a B737 aircraft were measured during a pressurization cycle to a differential pressure of 6.2 psi while the aircraft was on the ground. It was found that hoop strains were higher than longitudinal strains at each location; membrane strains in the unreinforced skin were higher than in the joint; membrane strains in the hoop direction, as well as radial displacements, tended to be highest at the mid-bay location between skin reinforcements; significant bending in the hoop direction occurred in the joint and in the skin near the joint, and the bending was unsymmetrically distributed about the stringer at the middle of the joint; and radial displacements were unsymmetrically distributed across the lap joint. The interpretation of the strain gage data for locations on the bonded and riveted lap joint assumed that the joint did not contain disbonded areas.

  5. Large-scale Advanced Prop-fan (LAP) technology assessment report

    NASA Technical Reports Server (NTRS)

    Degeorge, C. L.

    1988-01-01

    The technologically significant findings and accomplishments of the Large Scale Advanced Prop-Fan (LAP) program in the areas of aerodynamics, aeroelasticity, acoustics and materials and fabrication are described. The extent to which the program goals related to these disciplines were achieved is discussed, and recommendations for additional research are presented. The LAP program consisted of the design, manufacture and testing of a near full-scale Prop-Fan or advanced turboprop capable of operating efficiently at speeds to Mach .8. An aeroelastically scaled model of the LAP was also designed and fabricated. The goal of the program was to acquire data on Prop-Fan performance that would indicate the technology readiness of Prop-Fans for practical applications in commercial and military aviation.

  6. Grain decoration in aluminum oxynitride (ALON) from polishing on bound abrasive laps

    NASA Astrophysics Data System (ADS)

    Gregg, Leslie L.; Marino, Anne E.; Hayes, Jennifer C.; Jacobs, Stephen D.

    2004-01-01

    Aluminum oxynitride (ALON) is a polycrystalline material that has proven difficult to polish due to its grain structure. Bound abrasives are an effective means for polishing ALON, and work is being done with them to obtain good surfaces, with reasonable removal rates. Laps consisting of abrasives bound in epoxy matrices were created for polishing ALON. The effects of varying abrasive type, abrasive concentration, lap shape, coolant and load were studied. Metrology procedures were developed to monitor different aspects of the grain structure and numerically evaluate grain boundary decoration. Strategies were developed to polish ALON at acceptable rates with reasonably good surface quality. Work is directed toward finding optimal bound abrasive lap formulations that can be fabricated into ring and/or contour tools for testing on CNC machining platforms.

  7. Grain decoration in aluminum oxynitride (ALON) from polishing on bound abrasive laps

    NASA Astrophysics Data System (ADS)

    Marino, Anne E.; Hayes, Jennifer; Gregg, Leslie L.; Jacobs, Stephen D.

    2003-05-01

    Aluminum oxynitride (ALON) is a material with desirable qualities for a variety of applications that has proven difficult to polish because of its grain structure. Bound abrasives may prove to be an effective means of polishing it, and work is being done with them to obtain good surfaces on ALON, with reasonable removal rates. Laps consisting of abrasives bound in epoxy matrices have been created for polishing ALON. The effects of varying abrasive type, abrasive concentration, lap shape, coolant and load are being studied. Metrology procedures are being developed to monitor different aspects of the grain structure and numerically evaluate its decoration. Strategies have been developed to polish ALON at acceptable rates with reasonably good surface quality. Work is directed toward finding optimal bound abrasive lap formulations that can be fabricated into ring and/or contour tools for testing on CNC machining platforms.

  8. EFFECT OF TOOL FEATURE ON THE JOINT STRENGTH OF DISSIMILAR FRICTION STIR LAP WELDS

    SciTech Connect

    Jana, Saumyadeep; Hovanski, Yuri; Grant, Glenn J.; Mattlin, Karl F.

    2011-04-25

    Several variations of friction stir tools were used to investigate the effects on the joint strengths of dissimilar friction stir lap welds. In the present lap weld configuration the top sheet was a 2.32 mm thick Mg (AZ 31) alloy. The bottom sheet consisted of two different steels, a (i) 0.8 mm thick electro-galvanized (EG) mild steel, or a (ii) 1.5 mm thick hot dip galvanized (HDG) high strength low alloy (HSLA) steel. Initially the tool shape was modified to accommodate the material, at which point the tool geometry was fixed. With a fixed tool geometry an additional feature was added to the pin bottom on one of the tools by incorporating a short hard insert, which would act as a stronger bottom sheet cutter. The effects of such modification on the unguided lap shear strength, and associated microstructural changes are discussed in this study.

  9. Failure strength prediction for adhesively bonded single lap joints

    NASA Astrophysics Data System (ADS)

    Rahman, Niat Mahmud

    For adhesively bonded joint, failure strength depends on many factors such as material properties (both adhesive and adherend), specimen geometries, test environments, surface preparation procedures, etc. Failure occurs inside constitutive materials or along joint interfaces. Based on location, adhesively bonded failure mode can be classified as adhesive failure mode, cohesive failure mode and adherend failure mode. Failure mode directly affects the failure strength of joint. For last eight decades, researchers have developed analytical, empirical or semi-empirical methods capable of predicting failure strength for adhesively bonded joints generating either cohesive failure or adherend failure. Applicability of most of the methods is limited to particular cases. In this research, different failure modes for single lap joints (SLJs) were generated experimentally using epoxy based paste adhesive. Based on experimental data and analytical study, simplified failure prediction methods were developed for each failure mode. For adhesive failure mode, it is observed that peel stress distributions concur along interface near crack initiation points. All SLJs for this test endured consistent surface treatments. Geometric parameters of the joints were varied to study their effect on failure strength. Peel stress distributions were calculated using finite analysis (FEA). Based on peel stress distribution near crack initiation point, a failure model is proposed. Numerous analytical, empirical and semi-empirical models are available for predicting failure strengths of SLJs generating cohesive failures. However, most of the methods in the literature failed to capture failure behavior of SLJs having thickness of adhesive layer as variable. Cohesive failure mode was generated experimentally using aluminum as adherend and epoxy adhesive considering thickness of adhesive layers as variable within SLJs. Comparative study was performed among various methods. It was observed that

  10. Development of optical packet and circuit integrated ring network testbed.

    PubMed

    Furukawa, Hideaki; Harai, Hiroaki; Miyazawa, Takaya; Shinada, Satoshi; Kawasaki, Wataru; Wada, Naoya

    2011-12-12

    We developed novel integrated optical packet and circuit switch-node equipment. Compared with our previous equipment, a polarization-independent 4 × 4 semiconductor optical amplifier switch subsystem, gain-controlled optical amplifiers, and one 100 Gbps optical packet transponder and seven 10 Gbps optical path transponders with 10 Gigabit Ethernet (10GbE) client-interfaces were newly installed in the present system. The switch and amplifiers can provide more stable operation without equipment adjustments for the frequent polarization-rotations and dynamic packet-rate changes of optical packets. We constructed an optical packet and circuit integrated ring network testbed consisting of two switch nodes for accelerating network development, and we demonstrated 66 km fiber transmission and switching operation of multiplexed 14-wavelength 10 Gbps optical paths and 100 Gbps optical packets encapsulating 10GbE frames. Error-free (frame error rate < 1×10(-4)) operation was achieved with optical packets of various packet lengths and packet rates, and stable operation of the network testbed was confirmed. In addition, 4K uncompressed video streaming over OPS links was successfully demonstrated.

  11. Controlling plasmonic wave packets in silver nanowires.

    SciTech Connect

    Cao, L.; Nome, R.; Montgomery, J. M.; Gray, S. K.; Scherer, N. F.

    2010-09-01

    Three-dimensional finite-difference time-domain simulations were performed to explore the excitation of surface plasmon resonances in long silver (Ag) nanowires. In particular, we show that it is possible to generate plasmonic wave packets that can propagate along the nanowire by exciting superpositions of surface plasmon resonances. By using an appropriately chirped pulse, it is possible to transiently achieve localization of the excitation at the distal end of the nanowire. Such designed coherent superpositions will allow realizing spatiotemporal control of plasmonic excitations for enhancing nonlinear responses in plasmonic 'circuits'.

  12. Comparison of all optical forwarding packet architectures

    NASA Astrophysics Data System (ADS)

    Farhat, Rim; Farhat, Amel; Menif, Mourad

    2016-04-01

    In this paper two all optical packet forwarding architectures based on non linear effect in semiconductor optical amplifier in Mach-Zehnder configuration SOA-MZI are studied. The first architecture consist in combing flip flop functionality with the AND logic functionality in the same unit. Error free operation at 40 Gbps for two cascaded nodes is achieved. In the second architecture two separated units namely the flip flop and the AND logic gate are used. 100 Gbps bit rate is reached. At 40 Gbps error free operation is achieved for three cascaded nodes.

  13. Audio-Visual/Communications Teaching Aids Packet. Supplementary Materials. Packet P-8.

    ERIC Educational Resources Information Center

    Peace Corps, Washington, DC. Information Collection and Exchange Div.

    This packet contains three handouts on training theory and the use of audiovisual aids, as well as a section on materials and presentation techniques for use by community development workers concerned with exchanging information and working with the people in a community. The first handout, "Communication in Development," briefly discusses the…

  14. HA95 and LAP2 beta mediate a novel chromatin-nuclear envelope interaction implicated in initiation of DNA replication.

    PubMed

    Martins, Sandra; Eikvar, Sissel; Furukawa, Kazuhiro; Collas, Philippe

    2003-01-20

    HA95 is a chromatin-associated protein that interfaces the nuclear envelope (NE) and chromatin. We report an interaction between HA95 and the inner nuclear membrane protein lamina-associated polypeptide (LAP) 2 beta, and a role of this association in initiation of DNA replication. Precipitation of GST-LAP2 beta fusion proteins and overlays of immobilized HA95 indicate that a first HA95-binding region lies within amino acids 137-242 of LAP2 beta. A second domain sufficient to bind HA95 colocalizes with the lamin B-binding domain of LAP2beta at residues 299-373. HA95-LAP2 beta interaction is not required for NE formation. However, disruption of the association of HA95 with the NH2-terminal HA95-binding domain of LAP2 beta abolishes the initiation, but not elongation, of DNA replication in purified G1 phase nuclei incubated in S-phase extract. Inhibition of replication initiation correlates with proteasome-mediated proteolysis of Cdc6, a component of the prereplication complex. Rescue of Cdc6 degradation with proteasome inhibitors restores replication. We propose that an interaction of LAP2beta, or LAP2 proteins, with HA95 is involved in the control of initiation of DNA replication. PMID:12538639

  15. CrossLaps and beta-glucuronidase in peri-implant and gingival crevicular fluid.

    PubMed

    Schubert, U; Kleber, B M; Strietzel, F P; Dörfling, P

    2001-01-01

    Collagen degradation products of the carboxyterminal region possibly reflect bone and attachment loss. In the present study, the Serum CrossLaps One-Step enzyme-linked immunosorbent assay was used to determine a specific part of the carboxyterminal region of type I collagen, the CrossLaps. Samples of peri-implant and gingival crevicular fluid of 111 implants and 53 teeth from 47 partially or completely edentulous patients were examined in reference to levels of CrossLaps and beta-glucuronidase (beta G), an established marker of periodontal disease. Clinical probing pocket depth (PPD), bleeding on probing (BOP), plaque accumulation, mobility, radiographic bone loss, and the occurrence of Actinobacillus actinomycetemcomitans, Porphyromonas gingivalis, and Prevotella intermedia were assessed. The mean values were: for PPD at implants 3.76 +/- 1.41 mm, at teeth 3.44 +/- 0.88 mm; for beta G at implants 0.364 +/- 0.392 pU/min, at teeth 0.314 +/- 0.209 pU/min; for CrossLaps at implants 0.069 +/- 0.059 pmol/min, at teeth 0.082 +/- 0.053 pmol/min. Bleeding on probing was significantly higher on implants than on teeth (McNemar test, P = .004). No significant difference of beta G levels was found between teeth and implants (Wilcoxon test). A negative correlation was found between beta G levels and CrossLaps levels at teeth (Pearson-rank correlation, P = .002). On implants, no significant correlation of these 2 parameters was seen, but significant correlations were found between sulcus fluid flow rate and PPD (P = .012), beta G levels and bone loss (P < 0.0005), and CrossLaps levels and PPD (P = .011). CrossLaps can be detected in both gingival and peri-implant crevicular fluid. While rising levels of beta G may indicate acute peri-implantitis, CrossLaps may not, but could play a role as a marker of ongoing attachment loss.

  16. Lap-belt injury with complete avulsion of the spinal cord and cauda equina.

    PubMed

    Tubbs, R Shane; Golden, Blake; Doyle, Scott; Grabb, Paul A; Oakes, W Jerry

    2006-10-01

    The authors report a child who was involved in an automobile accident. The patient was restrained by a rear seat lap belt. Radiological examination revealed an L4 Chance-type fracture and ligamentous disruption at the L4-L5 interval. During superficial dissection of the paraspinal muscles for a spinal fusion procedure, the cauda equina and the lower spinal cord (several centimeters) were visible, completely transected and herniated into the extraspinal space through a disrupted thoracolumbar fascia. The clinician should be aware of the potentially devastating results following a lap-belt injury in which a Chance fracture is produced.

  17. Non destructive evaluation of adhesively bonded carbon fiber reinforced composite lap joints with varied bond quality

    NASA Astrophysics Data System (ADS)

    Vijayakumar, R. L.; Bhat, M. R.; Murthy, C. R. L.

    2012-05-01

    Structural adhesive bonding is widely used to execute assemblies in automobile and aerospace structures. The quality and reliability of these bonded joints must be ensured during service. In this context non destructive evaluation of these bonded structures play an important role. Evaluation of adhesively bonded composite single lap shear joints has been attempted through experimental approach. Series of tests, non-destructive as well as destructive were performed on different sets of carbon fiber reinforced polymer (CFRP) composite lap joint specimens with varied bond quality. Details of the experimental investigations carried out and the outcome are presented in this paper.

  18. Role of C/EBPβ-LAP and C/EBPβ-LIP in early adipogenic differentiation of human white adipose-derived progenitors and at later stages in immature adipocytes.

    PubMed

    Lechner, Stefan; Mitterberger, Maria C; Mattesich, Monika; Zwerschke, Werner

    2013-01-01

    We investigated the role of the major isoforms of CCAAT enhancer binding protein β (C/EBPβ), C/EBPβ-LAP and C/EBPβ-LIP, in adipogenesis of human white adipose-derived stromal/progenitor cells (ASC). C/EBPβ gene expression was transiently induced early in adipogenesis. At later stages, in immature adipocytes, the C/EBPβ mRNA and protein levels declined. The C/EBPβ-LIP protein steady-state level decreased considerably stronger than the C/EBPβ-LAP level and the C/EBPβ-LIP half-life was significantly shorter than the C/EBPβ-LAP half-life. The turn-over of both C/EBPβ-isoforms was regulated by ubiquitin/proteasome-dependent degradation. These data suggest that the protein stability of the C/EBPβ-isoforms is differentially regulated in the course of adipogenesis and in immature adipocytes. Constitutive overexpression of C/EBPβ-LIP had antiadipogenic activity in human ASC. C/EBPβ-LAP, which promotes adipogenesis in mouse 3T3-L1 preadipocytes by directly activating expression of the adipogenic keyregulator PPARγ2, induced the expression of PPARγ2 and of the adipocyte differentiation gene product FABP4 in confluent ASC in the absence of adipogenic hormones. At later stages after hormone cocktail-induced adipogenesis, in immature adipocytes, constitutive overexpression of C/EBPβ-LAP led to reduced expression of PPARγ2 and FABP4, C/EBPα expression was downregulated and the expression of the adipocyte differentiation gene products adiponectin and leptin was impaired. These findings suggest that constitutive overexpression of C/EBPβ-LAP induces adipogenesis in human ASC and negatively regulates the expression of adipogenic regulators and certain adipocyte differentiation gene products in immature adipocytes. We conclude the regulation of both C/EBPβ gene expression and C/EBPβ-LIP and C/EBPβ-LAP protein turn-over plays an important role for the expression of adipogenic regulators and/or adipocyte differentiation genes in early adipogenic differentiation of

  19. Exact Results for `Bouncing' Gaussian Wave Packets

    NASA Astrophysics Data System (ADS)

    Belloni, M.; Doncheski, M. A.; Robinett, R. W.

    2005-01-01

    We consider time-dependent Gaussian wave packet solutions of the Schrödinger equation, with arbitrary initial central position, x0, and momentum, p0, for an otherwise free particle, but with an infinite wall at x = 0, so-called bouncing wave packets. We show how difference or mirror solutions of the form ψ(x,t) - ψ(-x,t) can, in this case, be normalized exactly, allowing for the evaluation of a number of time-dependent expectation values and other quantities in closed form. For example, we calculate langp2rangt explicitly which illustrates how the free-particle kinetic (and hence total energy) is affected by the presence of the distant boundary. We also discuss the time dependence of the expectation values of position, langxrangt, and momentum, langprangt, and their relation to the impulsive force during the `collision' with the wall. Finally, the x0, p0 → 0 limit is shown to reduce a special case of a non-standard free-particle Gaussian solution. The addition of this example to the literature then expands of the relatively small number of Gaussian solutions to quantum mechanical problems with familiar classical analogs (free particle, uniform acceleration, harmonic oscillator, unstable oscillator, and uniform magnetic field) available in closed form.

  20. Per-packet reservation MAC protocols

    NASA Astrophysics Data System (ADS)

    Hrasnica, Halid

    2006-10-01

    Recent and future communications networks have to provide QoS guarantees for a rapidly growing number of various telecommunications services. Therefore, various communications systems, such as wireless and fixed access networks, apply reservation MAC protocols, providing a good network utilization, which is particularly important access networks with typically limited data rates, and ensuring realization of different QoS guarantees for various telecommunications services. This is important because of a hard competition among communications technologies applied in the access area. The considered MAC protocols apply a per-packet reservation method to avoid the transmission gaps caused by per-burst reservation, and accordingly to achieve a better network utilization. However, the per-packet reservation increases the network load caused by the signaling, which calls for an efficient resource sharing strategy in the signaling channel. There are two basic solutions for capacity sharing in the signaling channel: random access, usually using slotted ALOHA, and dedicated access, realized by a polling method. Performance improvement of basic protocols can be carried out in different ways; by protocol extensions, a combination of different protocol solutions, and the application of adaptive protocols providing a change of access parameters according to the current network status. The best network performance is achieved by application of two-step reservation protocol, which combined with additional features, such as appropriate signaling procedure, priority and fairness mechanisms, and combined reservation domains, can fulfill requirements of services with high QoS demands.

  1. Responding to Crisis at a School. A Resource Aid Packet.

    ERIC Educational Resources Information Center

    California Univ., Los Angeles. Center for Mental Health Schools.

    Schools are increasingly confronted with crisis events. This resource aid packet provides materials to facilitate planning and implementation of a school-based crisis response and related staff training. The packet is divided into four sections. The first offers a brief overview that can be shared with school staff to raise awareness about the…

  2. Understanding and Minimizing Staff Burnout. An Introductory Packet.

    ERIC Educational Resources Information Center

    California Univ., Los Angeles. Center for Mental Health Schools.

    Staff who bring a mental health perspective to the schools can deal with problems of staff burnout. This packet is designed to help in beginning the process of minimizing burnout, a process that requires reducing environmental stressors, increasing personal capabilities, and enhancing job supports. The packet opens with brief discussions of "What…

  3. Continuing Development of California State Packet Radio Project.

    ERIC Educational Resources Information Center

    Brownrigg, Edwin

    1992-01-01

    Provides background on the California State Library Packet Radio project, which will use packet radios to deploy a wireless, high-speed, wide-area network of 600 nodes, including 100 libraries, in the San Francisco Bay Area. Project goals and objectives, plan of operation, equipment, and evaluation plans are summarized. (MES)

  4. Langston Hughes Curriculum Packet: Dig and Be Dug in Return.

    ERIC Educational Resources Information Center

    Danielson, Susan

    Designed in a flexible format for use by college instructors, high school teachers, and community education workers, this curriculum packet serves as an introduction to the life and works of black poet Langston Hughes. The major component of the packet is a critical essay that explores the thematic highlights of Hughes's career. The remaining…

  5. Progerin reduces LAP2α-telomere association in Hutchinson-Gilford progeria

    PubMed Central

    Chojnowski, Alexandre; Ong, Peh Fern; Wong, Esther SM; Lim, John SY; Mutalif, Rafidah A; Navasankari, Raju; Dutta, Bamaprasad; Yang, Henry; Liow, Yi Y; Sze, Siu K; Boudier, Thomas; Wright, Graham D; Colman, Alan; Burke, Brian; Stewart, Colin L; Dreesen, Oliver

    2015-01-01

    Hutchinson-Gilford progeria (HGPS) is a premature ageing syndrome caused by a mutation in LMNA, resulting in a truncated form of lamin A called progerin. Progerin triggers loss of the heterochromatic marker H3K27me3, and premature senescence, which is prevented by telomerase. However, the mechanism how progerin causes disease remains unclear. Here, we describe an inducible cellular system to model HGPS and find that LAP2α (lamina-associated polypeptide-α) interacts with lamin A, while its interaction with progerin is significantly reduced. Super-resolution microscopy revealed that over 50% of telomeres localize to the lamina and that LAP2α association with telomeres is impaired in HGPS. This impaired interaction is central to HGPS since increasing LAP2α levels rescues progerin-induced proliferation defects and loss of H3K27me3, whereas lowering LAP2 levels exacerbates progerin-induced defects. These findings provide novel insights into the pathophysiology underlying HGPS, and how the nuclear lamina regulates proliferation and chromatin organization. DOI: http://dx.doi.org/10.7554/eLife.07759.001 PMID:26312502

  6. Fracture analysis of multi-site cracking in fuselage lap joints

    NASA Astrophysics Data System (ADS)

    Beuth, J. L.; Hutchinson, J. W.

    1994-09-01

    A two-dimensional plane stress elastic fracture mechanics analysis of a cracked lap joint fastened by rigid pins is presented and results are applied to the problem of multi-site damage (MSD) in riveted lap joints of aircraft fuselage skins. Two problems are addressed, the problem of equal length MSD cracks and the problem of alternating length MSD cracks. For the problem of equal length cracks, two models of rivet/skin interactions are studied and the role of residual stresses due to the riveting process is explored. Stress intensity factors are obtained as a function of normalized crack length. Also, the load distribution among rivet rows and the compliance change of the joint due to MSD cracking are obtained. For the problem of alternating length cracks, attention is focussed on how load is distributed between columns of rivets and how this load shedding can alter crack tip stress intensity factors. The equal and alternating length crack analyses reveal no clear-cut mechanism to explain the relative uniformity of fatigue cracks emerging from lap joint rivet holes in actual aircraft and in mechanical lap joint tests.

  7. Progerin reduces LAP2α-telomere association in Hutchinson-Gilford progeria.

    PubMed

    Chojnowski, Alexandre; Ong, Peh Fern; Wong, Esther S M; Lim, John S Y; Mutalif, Rafidah A; Navasankari, Raju; Dutta, Bamaprasad; Yang, Henry; Liow, Yi Y; Sze, Siu K; Boudier, Thomas; Wright, Graham D; Colman, Alan; Burke, Brian; Stewart, Colin L; Dreesen, Oliver

    2015-08-27

    Hutchinson-Gilford progeria (HGPS) is a premature ageing syndrome caused by a mutation in LMNA, resulting in a truncated form of lamin A called progerin. Progerin triggers loss of the heterochromatic marker H3K27me3, and premature senescence, which is prevented by telomerase. However, the mechanism how progerin causes disease remains unclear. Here, we describe an inducible cellular system to model HGPS and find that LAP2α (lamina-associated polypeptide-α) interacts with lamin A, while its interaction with progerin is significantly reduced. Super-resolution microscopy revealed that over 50% of telomeres localize to the lamina and that LAP2α association with telomeres is impaired in HGPS. This impaired interaction is central to HGPS since increasing LAP2α levels rescues progerin-induced proliferation defects and loss of H3K27me3, whereas lowering LAP2 levels exacerbates progerin-induced defects. These findings provide novel insights into the pathophysiology underlying HGPS, and how the nuclear lamina regulates proliferation and chromatin organization.

  8. A neural-fuzzy model with confidence measure for controlled stressed-lap surface shape presentation

    NASA Astrophysics Data System (ADS)

    Chen, Minyou; Wan, Yongjian; Wu, Fan; Xie, Kaigui; Wang, Mingyu; Fan, Bin

    2009-05-01

    In computer controlled large aspheric mirror polishing process, it is crucially important to build an accurate stressed-lap surface model for shape control. It is desirable to provide a practical measure of prediction confidence to access the reliability of the resulting models. To build a reliable prediction model for representing the surface shape of stressed lap polishing process in large aperture and highly aspheric optical surface, this paper proposed a predictive model with its own confidence interval estimate based on a fuzzy neural network. The calculation of confidence interval accounts for the training data distribution and accuracy of the trained model with the given input-output data. Simulation results show that the proposed confidence interval estimation reflects the data distribution and extrapolation correctly, and works well in high-dimensional sparse data set of the detected stressed lap surface shape changes. The original data from the micro-displacement sensor matrix were used to train the neural network model. The experiment results showed that the proposed model can represent the surface shape of the stressed-lap accurately and facilitate the computer controlled optical polishing process.

  9. Design Considerations of Polishing Lap for Computer-Controlled Cylindrical Polishing Process

    NASA Technical Reports Server (NTRS)

    Khan, Gufran S.; Gubarev, Mikhail; Arnold, William; Ramsey, Brian D.

    2009-01-01

    This paper establishes a relationship between the polishing process parameters and the generation of mid spatial-frequency error. The consideration of the polishing lap design to optimize the process in order to keep residual errors to a minimum and optimization of the process (speeds, stroke, etc.) and to keep the residual mid spatial-frequency error to a minimum, is also presented.

  10. 77 FR 27746 - Notice of Submission for OMB Review; Federal Student Aid; Lender Application Process (LAP)

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-11

    ... special allowance, as well as Federal Insured Student Loan claims payment, under the Federal Family Education Loan Program. DATES: Interested persons are invited to submit comments on or before June 11, 2012... Notice of Submission for OMB Review; Federal Student Aid; Lender Application Process (LAP) SUMMARY:...

  11. Correlates of Mood and RPE During Multi-Lap Off-Road Cycling.

    PubMed

    Viana, Bruno Ferreira; Pires, Flávio Oliveira; Inoue, Allan; Micklewright, Dominic; Santos, Tony Meireles

    2016-03-01

    This study examined the relationship between mood and rating of perceived exertion (RPE) during a simulated multiple-lap time trial (MLTT). Nineteen male cyclists performed a MLTT consisting of four 9.9 km laps, each lap with a gradient ranging from 0 to 10 %. Mood as measured by the Profile of Mood States Questionnaire (POMS) and perceived exertion as measured by the Borg CR100 scale (RPE) were obtained at the end of each lap. A categorical multiple regressive model, having median of POMS subscales as independent variables, was obtained to explain the variance in median RPE responses. Increases in POMS fatigue scores and decreases in POMS vigour scores were observed throughout the MLTT (P < 0.001). A linear increase in RPE during the MLTT was also observed (P < 0.001). POMS fatigue subscale scores accounted for 88 % of the variance in RPE during the MLTT (R(2) = 0.88, P = 0.002), and no other POMS subscale improved the final predictive model. With the exception of fatigue these results suggest that most aspects of mood do not have a discernable effect on RPE during a MLTT. The rate of increase in RPE can predict the MLTT endpoint.

  12. Determination of Arsenic Poisoning and Metabolism in Hair by Synchrotron Radiation: The Case of Phar Lap

    SciTech Connect

    Kempson, Ivan M.; Henry, Dermot A.

    2010-08-26

    Fresh physical evidence about the demise of the racehorse Phar Lap (see photograph) has been gathered from the study of mane hair samples by synchrotron radiation analysis with high resolution X-ray fluorescence (XRF) and X-ray absorption near edge structure (XANES) analyses. The results are indicative of arsenic ingestion and metabolism, and show that the racing champion died from arsenic poisoning.

  13. Improving Critical Thinking Skills Using Learning Model Logan Avenue Problem Solving (LAPS)-Heuristic

    ERIC Educational Resources Information Center

    Anggrianto, Desi; Churiyah, Madziatul; Arief, Mohammad

    2016-01-01

    This research was conducted in order to know the effect of Logan Avenue Problem Solving (LAPS)-Heuristic learning model towards critical thinking skills of students of class X Office Administration (APK) in SMK Negeri 1 Ngawi, East Java, Indonesia on material curve and equilibrium of demand and supply, subject Introduction to Economics and…

  14. The impact of layer thickness on the performance of additively manufactured lapping tools

    NASA Astrophysics Data System (ADS)

    Williams, Wesley B.

    2015-10-01

    Lower cost additive manufacturing (AM) machines which have emerged in recent years are capable of producing tools, jigs, and fixtures that are useful in optical fabrication. In particular, AM tooling has been shown to be useful in lapping glass workpieces. Various AM machines are distinguished by the processes, materials, build times, and build resolution they provide. This research investigates the impact of varied build resolution (specifically layer resolution) on the lapping performance of tools built using the stereolithographic assembly (SLA) process in 50 μm and 100 μm layer thicknesses with a methacrylate photopolymer resin on a high resolution desktop printer. As with previous work, the lapping tools were shown to remove workpiece material during the lapping process, but the tools themselves also experienced significant wear on the order of 2-3 times the mass loss of the glass workpieces. The tool wear rates for the 100 μm and 50 μm layer tools were comparable, but the 50 μm layer tool was 74% more effective at removing material from the glass workpiece, which is attributed to some abrasive particles being trapped in the coarser surface of the 100 um layer tooling and not being available to interact with the glass workpiece. Considering the tool wear, these additively manufactured tools are most appropriate for prototype tooling where the low cost (<$45) and quick turnaround make them attractive when compared to a machined tool.

  15. The ESA standard for telemetry and telecommand packet utilisation: PUS

    NASA Technical Reports Server (NTRS)

    Kaufeler, Jean-Francois

    1994-01-01

    ESA has developed standards for packet telemetry and telecommand, which are derived from the recommendations of the Inter-Agency Consultative Committee for Space Data Systems (CCSDS). These standards are now mandatory for future ESA programs as well as for many programs currently under development. However, while these packet standards address the end-to-end transfer of telemetry and telecommand data between applications on the ground and Application Processes on-board, they leave open the internal structure or content of the packets. This paper presents the ESA Packet Utilization Standard (PUS) which addresses this very subject and, as such, serves to extend and complement the ESA packet standards. The goal of the PUS is to be applicable to future ESA missions in all application areas (Telecommunications, Science, Earth Resources, microgravity, etc.). The production of the PUS falls under the responsibility of the ESA Committee for Operations and EGSE Standards (COES).

  16. Theory for low-frequency modulated Langmuir wave packets

    NASA Technical Reports Server (NTRS)

    Cairns, Iver H.; Robinson, P. A.

    1992-01-01

    Langmuir wave packets with low frequency modulations (or beats) observed in the Jovian foreshock are argued to be direct evidence for the Langmuir wave decay L yields L-prime + S. In this decay, 'pump' Langmuir waves L, driven by an electron beam, produce backscattered product Langmuir waves L-prime and ion sound waves S. The L and L-prime waves beat at the frequency and wavevector of the S waves, thereby modulating the wave packets. Beam speeds calculated using the modulated Jovian wave packets (1) are reasonable, at 4-10 times the electron thermal speed, (2) are consistent with theoretical limits on the decay process, and (3) decrease with increasing foreshock depth, as expected theoretically. These results strongly support the theory. The modulation depth of some wave packets suggests saturation by the decay L yields L-prime + S. Applications to modulated Langmuir packets in the Venusian and terrestrial foreshocks and in a type III radio source are proposed.

  17. Hypoplastic basement membrane of the lens anlage in the inheritable lens aplastic mouse (lap mouse).

    PubMed

    Aso, S; Baba, R; Noda, S; Ikuno, S; Fujita, M

    2000-04-01

    Adult homozygous lap mice show various eye abnormalities such as aphakia, retinal disorganization, and dysplasia of the cornea and anterior chamber. In the fetal eye of a homozygous lap mouse, the lens placode appears to develop normally. However, the lens vesicle develops abnormally to form a mass of cells without a cavity, and the mass vanishes soon afterward. Apoptotic cell death is associated with the disappearance of the lens anlage. We examined the basement membranes of the lens anlage of this mutant by immunohistochemical methods under light microscopy using antibodies against basement membrane components of the lens anlage, type IV collagen, fibronectin, laminin, heparan sulfate proteoglycan, and entactin and by transmission electron microscopy. Immunohistochemistry showed the distribution and intensity of antibody binding to the lens anlage to be almost the same for each these antibodies regardless of the stage of gestation or whether the anlagen were from normal BALB/c or lap mice. Thus, positive continuous reactions were observed around the exterior region of the lens anlage from day 10 of gestation for type IV collagen, fibronectin, laminin, heparan sulfate proteoglycan antibodies, and at least from day 11of gestation for entactin antibody. The basement membrane lamina densa of both normal and lap mice was shown by electron microscopy to be discontinuous at days 10 and 10.5 of gestation. However, by day 11 the lamina densa was continuous in the lens anlagen of normal mice but still discontinuous in the lap mice. By day 12 of gestation, the lamina densa had thickened markedly in normal mice, whereas in lap mice it remained discontinuous and its thinness indicated hypoplasia. These results indicate that, while all basement components examined are produced and deposited in the normal region of the lens anlage in the lap mouse, the basement membrane is, for some reason, imperfectly formed. The time at which hypoplasia of the basement membrane was observed

  18. LAPS Lidar Measurements at the ARM Alaska Northslope Site (Support to FIRE Project)

    NASA Technical Reports Server (NTRS)

    Philbrick, C. Russell; Lysak, Daniel B., Jr.; Petach, Tomas M.; Esposito, Steven T.; Mulik, Karoline R.

    1998-01-01

    This report consists of data summaries of the results obtained during the May 1998 measurement period at Barrow Alaska. This report does not contain any data interpretation or analysis of the results which will follow this activity. This report is forwarded with a data set on magnetic media which contains the reduced data from the LAPS lidar in 15 minute intervals. The data was obtained during the period 15-30 May 1998. The measurement period overlapped with several aircraft flights conducted by NASA as part of the FIRE project. The report contains a summary list of the data obtained plus figures that have been prepared to help visualize the measurement periods. The order of the presentation is as follows: Section 1. A copy of the Statement of Work for the planned activity of the second measurement period at the ARM Northslope site is provided. Section 2. A list of the data collection periods shows the number of one minute data records stored during each hour of operation and the corresponding size (Mbytes) of the one hour data folders. The folder and file names are composed from the year, month, day, hour and minute. The date/time information is given in UTC for easier comparison with other data sets. Section 3. A set of 4 comparisons between the LAPS lidar results and the sondes released by the ARM scientists from a location nearby the lidar. The lidar results show the +/- 1 sigma statistical error on each of the independent 75 m altitude bins of the data. This set of 4 comparisons was used to set and validate the calibration value which was then used for the complete data set. Section 4. A set of false color figures with up to 10 hours of specific humidity measurements are shown in each graph. Two days of measurements are shown on each page. These plots are crude representations of the data and permit a survey which indicates when the clouds were very low or where interesting events may occur in the results. These plots are prepared using the real time sequence

  19. Nondiffracting accelerating wave packets of Maxwell's equations.

    PubMed

    Kaminer, Ido; Bekenstein, Rivka; Nemirovsky, Jonathan; Segev, Mordechai

    2012-04-20

    We present the nondiffracting spatially accelerating solutions of the Maxwell equations. Such beams accelerate in a circular trajectory, thus generalizing the concept of Airy beams to the full domain of the wave equation. For both TE and TM polarizations, the beams exhibit shape-preserving bending which can have subwavelength features, and the Poynting vector of the main lobe displays a turn of more than 90°. We show that these accelerating beams are self-healing, analyze their properties, and find the new class of accelerating breathers: self-bending beams of periodically oscillating shapes. Finally, we emphasize that in their scalar form, these beams are the exact solutions for nondispersive accelerating wave packets of the most common wave equation describing time-harmonic waves. As such, this work has profound implications to many linear wave systems in nature, ranging from acoustic and elastic waves to surface waves in fluids and membranes. PMID:22680719

  20. Nondiffracting accelerating wave packets of Maxwell's equations.

    PubMed

    Kaminer, Ido; Bekenstein, Rivka; Nemirovsky, Jonathan; Segev, Mordechai

    2012-04-20

    We present the nondiffracting spatially accelerating solutions of the Maxwell equations. Such beams accelerate in a circular trajectory, thus generalizing the concept of Airy beams to the full domain of the wave equation. For both TE and TM polarizations, the beams exhibit shape-preserving bending which can have subwavelength features, and the Poynting vector of the main lobe displays a turn of more than 90°. We show that these accelerating beams are self-healing, analyze their properties, and find the new class of accelerating breathers: self-bending beams of periodically oscillating shapes. Finally, we emphasize that in their scalar form, these beams are the exact solutions for nondispersive accelerating wave packets of the most common wave equation describing time-harmonic waves. As such, this work has profound implications to many linear wave systems in nature, ranging from acoustic and elastic waves to surface waves in fluids and membranes.

  1. The Characteristics of Fatigue Damage in the Fuselage Riveted Lap Splice Joint

    NASA Technical Reports Server (NTRS)

    Piascik, Robert S.; Willard, Scott A.

    1997-01-01

    An extensive data base has been developed to form the physical basis for new analytical methodology to predict the onset of widespread fatigue damage in the fuselage lap splice joint. The results of detailed destructive examinations have been cataloged to describe the physical nature of MSD in the lap splice joint. ne catalog includes a detailed description, e.g., crack initiation, growth rates, size, location, and fracture morphology, of fatigue damage in the fuselage lap splice joint structure. Detailed examinations were conducted on a lap splice joint panel removed from a full scale fuselage test article after completing a 60,000 cycle pressure test. The panel contained a four bay region that exhibited visible outer skin cracks and regions of crack link-up along the upper rivet row. Destructive examinations revealed undetected fatigue damage in the outer skin, inner skin, and tear strap regions. Outer skin fatigue cracks were found to initiate by fretting damage along the faying surface. The cracks grew along the faying surface to a length equivalent to two to three skin thicknesses before penetrating the outboard surface of the outer skin. Analysis of fracture surface marker bands produced during full scale testing revealed that all upper rivet row fatigue cracks contained in a dim bay region grow at similar rates; this important result suggests that fracture mechanics based methods can be used to predict the growth of outer skin fatigue cracks in lap splice structure. Results are presented showing the affects of MSD and out-of-plane pressure loads on outer skin crack link-up.

  2. Determination of the Corrosive Conditions Present within Aircraft Lap-Splice Joints

    NASA Technical Reports Server (NTRS)

    Lewis, Karen S.; Kelly, Robert G.; Piascik, Robert S.

    1999-01-01

    The complexity of airframe structure lends itself to damage resulting from crevice corrosion. Fuselage lap-splice joints are a particularly important structural detail in this regard because of the difficulty associated with detection and measurement of corrosion in these occluded regions. The objective of this work is to develop a laboratory corrosion test protocol to identify the chemistry to which lap joints are exposed and to develop a model of the corrosion within the joints. A protocol for collecting and identifying the chemistry of airframe crevice corrosion has been developed. Capillary electrophoresis (CE) is used to identify the ionic species contained in corrosion product samples removed from fuselage lap splice joints. CE analysis has been performed on over sixty corrosion product samples removed from both civilian and military aircraft. Over twenty different ions have been detected. Measurements of pH of wetted corroded surfaces indicated an alkaline occluded solution. After determining the species present and their relative concentrations, the resultant solution was reproduced in bulk and electrochemical tests were performed to determine the corrosion rate. Electrochemical analyses of the behavior of AA2024-T3 in these solutions gave corrosion rates of up to 250 microns per year (10 mpy). Additional tests have determined the relative importance of each of the detected ions in model solutions used for future predictive tests. The statistically significant ions have been used to create a second generation solution. Laboratory studies have also included exposure tests involving artificial lap joints exposed to various simulated bulk and crevice environments. The extent and morphology of the attack in artificial lap joints has been compared to studies of corroded samples from actual aircraft. Other effects, such as temperature and potential, as well as the impact of the environment on fatigue crack growth have also been studied.

  3. Understanding Insurance. A Guide for Industrial Cooperative Training Programs. Learning Activity Package No. 15.

    ERIC Educational Resources Information Center

    Duenk, Lester G.; Tuel, Charles

    This learning activity package (LAP) on the insurance industry and the methods used to give protection to the insured is designed for student self-study. Following a list of learning objectives, the LAP contains a pretest (answer key provided at the back). Six learning activities follow. The learning activities cover the following material: terms…

  4. Networked LQG control over lossy channels with computational/packet-transmission delays and coarsely quantised packets

    NASA Astrophysics Data System (ADS)

    Foo, Yung Kuan; Moayedi, Maryam; Chai Soh, Yeng

    2016-04-01

    This article addresses the linear quadratic Gaussian (LQG) control problem of networked multi-input, multi-output systems where computational delay exists and the measurement and control signals are packetised and transmitted through a network within which random delay and packet loss may occur during transmissions. A transmission control protocol (TCP)-like protocol for the communication network is considered in which acknowledgement is sent from the actuator to the controller if and only if the control packet is received, assuming these acknowledgements always reach the estimator in time and without fail. To minimise the data word-length for transmissions over the network and to maximise control system performance, it is proposed that different quantisation resolutions be used for transmission data encapsulation, and control and output signals A/D-D/A conversions at sensor/actuator. To circumvent the problem of disparity between encapsulation and A/D-D/A quantisation resolutions, a pseudo-stochastic approach via subtractive dither is applied to quantise the transmission packets. This also enables us to model the quantisation errors as uncorrelated independent zero-mean additive white noises and apply standard LQG methodology and separation principle to design the estimator and the controller separately. An example is included to demonstrate the effectiveness of the approach.

  5. Petrography of Lunar Meteorite LAP 02205, a New Low-Ti Basalt Possibly Launch Paired with NWA 032

    NASA Technical Reports Server (NTRS)

    Jolliff, B. L.; Zeigler, R. A.; Korotev, R. L.

    2004-01-01

    Lunar meteorite LAP 02205 is a 1.23 kg basalt collected during the 2002 field season in the La- Paz ice field, Antarctica [1]. We present a petrographic description including mineral modes and compositions, and the major-element composition of the bulk meteorite. LAP 02205 is an Fe-rich, moderately low-Ti mare basalt that is similar in composition, mineralogy, and mineral chemistry to the NWA 032 basaltic lunar meteorite. LAP 02205 is yet another of the moderately low- Ti basaltic meteorites that are underrepresented among Apollo and Luna samples but that appear from remote sensing to be the most common basalt type on the Moon.

  6. Instrument for measurement of vacuum in sealed thin wall packets

    DOEpatents

    Kollie, Thomas G.; Thacker, Louis H.; Fine, H. Alan

    1993-01-01

    An instrument for the measurement of vacuum within sealed packets 12, the packets 12 having a wall 14 sufficiently thin that it can be deformed by the application of an external vacuum to small area thereof. The instrument has a detector head 18 for placement against the deformable wall 14 of the packet to apply the vacuum in a controlled manner to accomplish a limited deformation or lift of the wall 14, with this deformation or lift monitored by the application of light as via a bifurcated light pipe 20. Retro-reflected light through the light pipe is monitored with a photo detector 26. An abrupt change (e.g., a decrease) of retro-reflected light signals the wall movement such that the value of the vacuum applied through the head 18 to achieve this initiation of movement is equal to the vacuum Within the packet 12. In a preferred embodiment a vacuum reference plate 44 is placed beneath the packet 12 to ensure that no deformation occurs on the reverse surface 16 of the packet. A packet production line model is also described.

  7. Instrument for measurement of vacuum in sealed thin wall packets

    DOEpatents

    Kollie, T.G.; Thacker, L.H.; Fine, H.A.

    1993-10-05

    An instrument is described for the measurement of vacuum within sealed packets, the packets having a wall sufficiently thin that it can be deformed by the application of an external vacuum to small area thereof. The instrument has a detector head for placement against the deformable wall of the packet to apply the vacuum in a controlled manner to accomplish a limited deformation or lift of the wall, with this deformation or lift monitored by the application of light as via a bifurcated light pipe. Retro-reflected light through the light pipe is monitored with a photo detector. An abrupt change (e.g., a decrease) of retro-reflected light signals the wall movement such that the value of the vacuum applied through the head to achieve this initiation of movement is equal to the vacuum within the packet. In a preferred embodiment a vacuum reference plate is placed beneath the packet to ensure that no deformation occurs on the reverse surface of the packet. A packet production line model is also described. 3 figures.

  8. Rate-matching packet scheduler for real-rate applications

    NASA Astrophysics Data System (ADS)

    Li, Kang; Walpole, Jonathan; McNamee, Dylan; Pu, Calton; Steere, David C.

    2000-12-01

    A packet scheduler is an operating system component that controls the allocation of network interface bandwidth to outgoing network flows. By deciding which packet to send next, packet schedulers not only determine how bandwidth is shared among flows, but also play a key role in determining the rate and timing behavior of individual flows. The recent explosion of rate and timing-sensitive flows, particularly in the context of multimedia applications, has focused new interest on packet schedulers. Next generation packet schedulers must not only ensure separation among flows and meet real-time performance constraints, they must also support dynamic fine- grain real-location of bandwidth for flows with variable-bit- rate requirements. Unfortunately, today's packet schedulers either do not support rate and timing sensitive flows, or do so with reservation systems that are relatively coarse-grain and inflexible. This paper makes two contributions. First it shows how bandwidth requirements can be inferred directly from real-rate flows, without requiring explicit specifications from the application. Second, it presents the design, implementation and performance evaluation of a rate-matching packet scheduler that uses these inferred requirements to automatically and dynamically control the bandwidth allocation to flows.

  9. Reinforcement learning for congestion-avoidance in packet flow

    NASA Astrophysics Data System (ADS)

    Horiguchi, Tsuyoshi; Hayashi, Keisuke; Tretiakov, Alexei

    2005-04-01

    Occurrence of congestion of packet flow in computer networks is one of the unfavorable problems in packet communication and hence its avoidance should be investigated. We use a neural network model for packet routing control in a computer network proposed in a previous paper by Horiguchi and Ishioka (Physica A 297 (2001) 521). If we assume that the packets are not sent to nodes whose buffers are already full of packets, then we find that traffic congestion occurs when the number of packets in the computer network is larger than some critical value. In order to avoid the congestion, we introduce reinforcement learning for a control parameter in the neural network model. We find that the congestion is avoided by the reinforcement learning and at the same time we have good performance for the throughput. We investigate the packet flow on computer networks of various types of topology such as a regular network, a network with fractal structure, a small-world network, a scale-free network and so on.

  10. Observation of Quantum Interference between Separated Mechanical Oscillator Wave Packets

    NASA Astrophysics Data System (ADS)

    Kienzler, D.; Flühmann, C.; Negnevitsky, V.; Lo, H.-Y.; Marinelli, M.; Nadlinger, D.; Home, J. P.

    2016-04-01

    We directly observe the quantum interference between two well-separated trapped-ion mechanical oscillator wave packets. The superposed state is created from a spin-motion entangled state using a heralded measurement. Wave packet interference is observed through the energy eigenstate populations. We reconstruct the Wigner function of these states by introducing probe Hamiltonians which measure Fock state populations in displaced and squeezed bases. Squeezed-basis measurements with 8 dB squeezing allow the measurement of interference for Δ α =15.6 , corresponding to a distance of 240 nm between the two superposed wave packets.

  11. Realization of localized Bohr-like wave packets.

    PubMed

    Mestayer, J J; Wyker, B; Lancaster, J C; Dunning, F B; Reinhold, C O; Yoshida, S; Burgdörfer, J

    2008-06-20

    We demonstrate a protocol to create localized wave packets in very-high-n Rydberg states which travel in nearly circular orbits around the nucleus. Although these wave packets slowly dephase and eventually lose their localization, their motion can be monitored over several orbital periods. These wave packets represent the closest analog yet achieved to the original Bohr model of the hydrogen atom, i.e., an electron in a circular classical orbit around the nucleus. The possible extension of the approach to create "planetary atoms" in highly correlated stable multiply excited states is discussed.

  12. Observation of Quantum Interference between Separated Mechanical Oscillator Wave Packets.

    PubMed

    Kienzler, D; Flühmann, C; Negnevitsky, V; Lo, H-Y; Marinelli, M; Nadlinger, D; Home, J P

    2016-04-01

    We directly observe the quantum interference between two well-separated trapped-ion mechanical oscillator wave packets. The superposed state is created from a spin-motion entangled state using a heralded measurement. Wave packet interference is observed through the energy eigenstate populations. We reconstruct the Wigner function of these states by introducing probe Hamiltonians which measure Fock state populations in displaced and squeezed bases. Squeezed-basis measurements with 8 dB squeezing allow the measurement of interference for Δα=15.6, corresponding to a distance of 240 nm between the two superposed wave packets.

  13. Review of the use of physical restraints and lap belts with wheelchair users.

    PubMed

    Chaves, Eliana S; Cooper, Rory A; Collins, Diane M; Karmarkar, Amol; Cooper, Rosemarie

    2007-01-01

    Wheelchair-related physical restraints, lap belts, and other alternatives are intended to provide safe and adequate seating and mobility for individuals using wheelchairs. Physical restraints and lap belts are also helpful for positioning people in their wheelchairs to reduce the risk of injury during wheelchair tips and falls. However, when used improperly or in ways other than intended, injury or even death can result. Although widely prescribed, little evidence is available to direct professionals on the appropriate use of these restraints and lap belts and for whom these restraints are indicated. The purpose of this study was to conduct a review of available literature from 1966-2006 to identify the risks and benefits associated with lap belts while seated in wheelchairs. Twenty-five studies that met the inclusion criteria were reviewed. Nine studies reported the frequency of asphyxial deaths caused by physical restraints, nine studies reported the long-term complication and indirect adverse effects of physical restraints and lap-belt use, and seven studies reported the benefits of physical restraints and lap belts with individuals using wheelchairs. Despite the weak evidence, the results suggest a considerable number of deaths from asphyxia caused by the use of physical restraints occurred each year in the U.S. The majority of the deaths occurred in nursing homes, followed by hospitals, and then the home of the person. Most deaths occurred while persons were restrained in wheelchairs or beds. Based on that, caution needs to be exercised when using restraints or positioning belts. In addition, other seating and environment alternatives should be explored prior to using restraints or positioning belts, such as power wheelchair seating options. Positioning belts may reduce risk of falls from wheelchairs and should be given careful consideration, but caution should be exercised if the individual cannot open the latch independently. Also, the duration of use of the

  14. Calcium Causes Multimerization of the Large Adhesin LapF and Modulates Biofilm Formation by Pseudomonas putida

    PubMed Central

    Martínez-Gil, Marta; Romero, Diego; Kolter, Roberto

    2012-01-01

    LapF is a large secreted protein involved in microcolony formation and biofilm maturation in Pseudomonas putida. Its C-terminal domain shows the characteristics of proteins secreted through a type I secretion system and includes a predicted calcium binding motif. We provide experimental evidence of specific binding of Ca2+ to the purified C-terminal domain of LapF (CLapF). Calcium promotes the formation of large aggregates, which disappear in the presence of the calcium chelator EGTA. Immunolocalization of LapF also shows the tendency of this protein to accumulate in vivo in certain extracellular regions. These findings, along with results showing that calcium influences biofilm formation, lead us to propose a model in which P. putida cells interact with each other via LapF in a calcium-dependent manner during the development of biofilms. PMID:23042991

  15. All-optical packet header and payload separation based on two TOADs for optical packet switched networks

    NASA Astrophysics Data System (ADS)

    Ji, Wei; Zhang, Min; Ye, Peida

    2006-09-01

    We present a novel all-optical header and payload separation technique that can be utilized in Un-Slotted optical packet switched networks. The technique uses two modified TOADs, one is for packet header extraction with differential modulation scheme and the other performs a simple XOR operation between the packet and its self-derived header to get the separated payload. The main virtue of this system is simple structure and low power consumption. Through numerical simulations, the operating characteristics of the scheme are illustrated. In addition, the system parameters are discussed and designed to optimize the performance of the proposed scheme.

  16. Individualized Instruction in Science, Earth-Space Project, Self-Directed Activities.

    ERIC Educational Resources Information Center

    Kuczma, R. M.

    As a supplement to Learning Activity Packages (LAP) of the earth-space project, this manual presents self-directed activities especially designed for individualized instruction. Besides an introduction to LAP characteristics, sets of instructions are given in connection with the metric system, the earth's dimensions, indirect evidence for atomic…

  17. Individualized Instruction in Science, Time-Space-Matter, Self-Directed Activities.

    ERIC Educational Resources Information Center

    Kuczma, R. M.

    As a supplement to Learning Activity Packages (LAP) on the time-space-matter subject, details are presented for self-directed activities. Major descriptions are given on the background of LAP characteristics, metric system, profile graph construction, spectroscope operation, radiant energy measurement, sunspot effects, density determination,…

  18. Initial phase and free-particle wave packet evolution

    NASA Astrophysics Data System (ADS)

    Beach, Theodore L.

    2009-06-01

    The evolution of the free-particle wave function in one dimension is the same as scalar Fresnel diffraction from a one-dimensional structure. Quantum mechanics courses often explore the propagation of Gaussian wave packets, but the diffractionlike mathematics is sufficiently tractable to investigate the propagation of other wave packets, both numerically and analytically. More importantly, the diffraction analogy facilitates the development of an intuitive understanding of the role that the initial phase plays in free-particle wave packet evolution. This article considers some of the effects of the initial phase function on the subsequent evolution of free-particle wave packets in the position representation. These considerations reinforce the idea that the classical mechanics limit embodied in the correspondence principle and formalized in the Ehrenfest theorem is necessarily an incomplete representation of quantum behavior.

  19. Localization of wave packets in one-dimensional random potentials

    NASA Astrophysics Data System (ADS)

    Valdes, Juan Pablo Ramírez; Wellens, Thomas

    2016-06-01

    We study the expansion of an initially strongly confined wave packet in a one-dimensional weak random potential with short correlation length. At long times, the expansion of the wave packet comes to a halt due to destructive interferences leading to Anderson localization. We develop an analytical description for the disorder-averaged localized density profile. For this purpose, we employ the diagrammatic method of Berezinskii which we extend to the case of wave packets, present an analytical expression of the Lyapunov exponent which is valid for small as well as for high energies, and, finally, develop a self-consistent Born approximation in order to analytically calculate the energy distribution of our wave packet. By comparison with numerical simulations, we show that our theory describes well the complete localized density profile, not only in the tails but also in the center.

  20. Packet-Based Protocol Efficiency for Aeronautical and Satellite Communications

    NASA Technical Reports Server (NTRS)

    Carek, David A.

    2005-01-01

    This paper examines the relation between bit error ratios and the effective link efficiency when transporting data with a packet-based protocol. Relations are developed to quantify the impact of a protocol s packet size and header size relative to the bit error ratio of the underlying link. These relations are examined in the context of radio transmissions that exhibit variable error conditions, such as those used in satellite, aeronautical, and other wireless networks. A comparison of two packet sizing methodologies is presented. From these relations, the true ability of a link to deliver user data, or information, is determined. Relations are developed to calculate the optimal protocol packet size forgiven link error characteristics. These relations could be useful in future research for developing an adaptive protocol layer. They can also be used for sizing protocols in the design of static links, where bit error ratios have small variability.

  1. Analytic approach to the wave packet formalism in oscillation phenomena

    SciTech Connect

    Bernardini, A.E.; Leo, S. de

    2004-09-01

    We introduce an approximation scheme to perform an analytic study of the oscillation phenomena in a pedagogical and comprehensive way. By using Gaussian wave packets, we show that the oscillation is bounded by a time-dependent vanishing function which characterizes the slippage between the mass-eigenstate wave packets. We also demonstrate that the wave packet spreading represents a secondary effect which plays a significant role only in the nonrelativistic limit. In our analysis, we note the presence of a new time-dependent phase and calculate how this additional term modifies the oscillating character of the flavor conversion formula. Finally, by considering box and sine wave packets we study how the choice of different functions to describe the particle localization changes the oscillation probability.

  2. Propagation velocity of Alfven wave packets in a dissipative plasma

    SciTech Connect

    Amagishi, Y.; Nakagawa, H. ); Tanaka, M. )

    1994-09-01

    We have experimentally studied the behavior of Alfven wave packets in a dissipative plasma due to ion--neutral-atom collisions. It is urged that the central frequency of the packet is observed to gradually decrease with traveling distance in the absorption range of frequencies because of a differential damping among the Fourier components, and that the measured average velocity of its peak amplitude is not accounted for by the conventional group velocity, but by the prediction derived by Tanaka, Fujiwara, and Ikegami [Phys. Rev. A 34, 4851 (1986)]. Furthermore, when the initial central frequency is close to the critical frequency in the anomalous dispersion, the wave packet apparently collapses when traveling along the magnetic field; however, we have found that it is decomposed into another two wave packets with the central frequencies being higher or lower than the critical frequency.

  3. Nondispersive wave packets -- control through chaos

    NASA Astrophysics Data System (ADS)

    Buchleitner, Andreas

    2005-05-01

    Nondispersive wave packets were predicted to emerge in periodically driven Rydberg atoms a little more than 10 years ago [1], and have now been observed in the laboratory [2]. I shall illustrate how these robust, generic ``quantum particles'' and their relatives naturally emerge from the theory of chaotic quantum systems [3], and thus open new perspectives for robust quantum control in various experimental settings -- from one and two-electron [4] atoms under periodic or impulsive [5] driving to cold atoms in flashing periodic potentials, possibly amended by harmonic confinement [6]. Besides the fundamental underlying (nonlinear) resonance phenomena also some more subtle properties will be discussed, including open questions within the realm of spectral theory. *[1] A. Buchleitner, thèse de doctorat, Universit'e Paris 6 (1993); I. Bialynicki-Birula, M. Kalinski, and J. H. Eberly, Phys. Rev. Lett. 73, 1777 (1994); D. Delande and A. Buchleitner, Adv. At. Mol. Opt. Phys. 34, 85 (1994). *[2] H. Maeda and T. F. Gallagher, Phys. Rev. Lett. 92, 133004 (2004). *[3] A. Buchleitner, D. Delande, and J. Zakrzewski, Phys. Rep. 386, 409 (2002). *[4] J. Madroñero, PhD thesis, Ludwig-Maximilians-Universität München (2004), http://edoc.ub.uni-muenchen.de/archive/00002187. *[5] D.G. Arb'o et al., Phys. Rev. A 67, 63401 (2003). *[6] A.R.R. de Carvalho and A. Buchleitner, Phys. Rev. Lett. 93, 204101 (2004).

  4. Lumbar compression fractures secondary to lap-belt use in children.

    PubMed

    Sturm, P F; Glass, R B; Sivit, C J; Eichelberger, M R

    1995-01-01

    The correlation between flexion-distraction injuries and lap-belt use has been well documented. Over a 10-year period, we identified seven children admitted to Children's National Medical Center, Washington, DC, with compression fractures of the lumbar spine secondary to lap-belt use. Four were rear seat passengers, and three were in the front seat. The average age was 7 years. Four of the seven (57%) suffered associated abdominal injuries. One died of an associated head injury. We hypothesize that the mechanism of injury in these cases was similar to that in flexion-distraction injuries. The increased elasticity in the posterior ligamentous complex in children may be responsible for the occurrence of these compression fractures rather than the expected flexion-distraction-type injuries.

  5. Material characterization of structural adhesives in the lap shear mode. M.S. Thesis

    NASA Technical Reports Server (NTRS)

    Schenck, S. C.; Sancaktar, E.

    1983-01-01

    A general method for characterizing structural adhesives in the bonded lap shear mode is proposed. Two approaches in the form of semi-empirical and theoretical approaches are used. The semi-empirical approach includes Ludwik's and Zhurkov's equations to describe respectively, the failure stresses in the constant strain rate and constant stress loading modes with the inclusion of the temperature effects. The theoretical approach is used to describe adhesive shear stress-strain behavior with the use of viscoelastic or nonlinear elastic constitutive equations. Three different model adhesives are used in the simple lap shear mode with titanium adherends. These adhesives (one of which was developed at NASA Langley Research Center) are currently considered by NASA for possible aerospace applications. Use of different model adhesives helps in assessment of the generality of the method.

  6. Ground based experiments on the growth and characterization of L-Arginine Phosphate (LAP) crystals

    NASA Technical Reports Server (NTRS)

    Rao, S. M.; Cao, C.; Batra, A. K.; Lal, R. B.; Mookherji, T. K.

    1991-01-01

    L-Arginine Phosphate (LAP) is a new nonlinear optical material with higher efficiency for harmonic generation compared to KDP. Crystals of LAP were grown in the laboratory from supersaturated solutions by temperature lowering technique. Investigations revealed the presence of large dislocation densities inside the crystals which are observed to produce refractive index changes causing damage at high laser powers. This is a result of the convection during crystal growth from supersaturated solutions. It is proposed to grow these crystals in a diffusion controlled growth condition under microgravity environment and compare the crystals grown in space with those grown on ground. Physical properties of the solutions needed for modelling of crystal growth are also presented.

  7. A Practical Engineering Approach to Predicting Fatigue Crack Growth in Riveted Lap Joints

    NASA Technical Reports Server (NTRS)

    Harris, C. E.; Piascik, R. S.; Newman, J. C., Jr.

    2000-01-01

    An extensive experimental database has been assembled from very detailed teardown examinations of fatigue cracks found in rivet holes of fuselage structural components. Based on this experimental database, a comprehensive analysis methodology was developed to predict the onset of widespread fatigue damage in lap joints of fuselage structure. Several computer codes were developed with specialized capabilities to conduct the various analyses that make up the comprehensive methodology. Over the past several years, the authors have interrogated various aspects of the analysis methods to determine the degree of computational rigor required to produce numerical predictions with acceptable engineering accuracy. This study led to the formulation of a practical engineering approach to predicting fatigue crack growth in riveted lap joints. This paper describes the practical engineering approach and compares predictions with the results from several experimental studies.

  8. Investigation of defect rate of lap laser welding of stainless steel railway vehicles car body

    NASA Astrophysics Data System (ADS)

    Wang, Hongxiao

    2015-02-01

    In order to resolve the disadvantages such as poor appearance quality, poor tightness, low efficiency of resistance spot welding of stainless steel rail vehicles, partial penetration lap laser welding process was investigated widely. But due to the limitation of processing technology, there will be local incomplete fusion in the lap laser welding seam. Defect rate is the ratio of the local incomplete fusion length to the weld seam length. The tensile shear strength under different defect rate and its effect on the car body static strength are not clear. It is necessary to find the biggest defect rate by numerical analysis of effects of different defect rates on the laser welding stainless steel rail vehicle body structure strength ,and tests of laser welding shear tensile strength.

  9. Embedded wavelet packet transform technique for texture compression

    NASA Astrophysics Data System (ADS)

    Li, Jin; Cheng, Po-Yuen; Kuo, C.-C. Jay

    1995-09-01

    A highly efficient texture compression scheme is proposed in this research. With this scheme, energy compaction of texture images is first achieved by the wavelet packet transform, and an embedding approach is then adopted for the coding of the wavelet packet transform coefficients. By comparing the proposed algorithm with the JPEG standard, FBI wavelet/scalar quantization standard and the EZW scheme with extensive experimental results, we observe a significant improvement in the rate-distortion performance and visual quality.

  10. Behavior of a Moist Kelvin Wave Packet with Nonlinear Heating.

    NASA Astrophysics Data System (ADS)

    Wang, Bin; Xue, Yan

    1992-04-01

    The effects of nonlinear (positive only or conditional) heating on moist Kelvin waves are examined with a simple equatorial zonal-plane model describing the gravest baroclinic mode.The unstable perturbation subject to nonlinear beating emerges as a wave packet. A typical amplifying, eastward-moving wave packet is characterized by an asymmetric structure: 1) the ascending branch (wet region) is much narrower than the two descending ones (dry regions); and 2) the circulation cell to the east of the wet region center is smaller and stronger than its counterpart to the west of the center. The wet-dry asymmetry is primarily caused by the nonlinear beating effect, while the east-west asymmetry is a result of the movement of the wave packet relative to mean flow. The existence of Newtonian cooling and Rayleigh friction enhances the structural asymmetries.The unstable wave packet is characterized by two zonal length scales: the ascending branch length (ABL) and total circulation extent (TCE). For a given basic state, the growth rate of a wave packet increases with decreasing ABL or TCE. However, up to a moderate growth rate (order of day1) the energy spectra of all wave packets are dominated by zonal wavenumber one regardless of ABL size. In particular, the slowly growing (low frequency) wave packets normally exhibit TCEs of planetary scale and ABLs of synoptic scale.Observed equatorial intraseasonal disturbances often display a narrow convection region in between two much broader dry regions and a total circulation of planetary scale. These structure and scale characteristics are caused by the effects of nonlinear heating and the cyclic geometry of the equator. It is argued that the unstable disturbance found in numerical experiments (e.g., Lau and Peng; Hayashi and Sumi) is a manifestation of the nonlinear wave packet.

  11. A study of sandwich T-joints and composite lap joints

    NASA Astrophysics Data System (ADS)

    Turaga, Umamaheswar V. R. S.

    In this study, new efficient designs for adhesive sandwich T-joint and single-lap joint were proposed and investigated. In the proposed new sandwich T-joint, called U-channel joint, the load transfer path at the web-flange interface was modified to include a U-shaped aluminum channel which provides strong path for load transfer. Experimental results show that the new design has 62% more strength than the conventional circular fillet joint. The new U-channel joint was tested in tension, compression and bending to investigate its characteristics. It is found to have good performance in bending also, even though in compression it performs same as the circular fillet joint. An extensive parametric study was carried out to investigate the effect of parameters like flange skin stiffener, foam density, foam thickness in the web, and aluminum attachments. A fracture mechanics criterion based on the strain energy release rate was used to explain the failure modes, apart from the stress analysis explanation. The failure loads of the joints in compression were predicted using a maximum principal stress failure criterion based on the sandwich beam theory. A new single lap joint with attachments was proposed in the second phase of the research. The design was verified using both aluminum and composite materials. The new design was found to have 59% more strength than the single-lap joint. A parametric study was performed to find out the influence of the angle of attachment, thickness of attachment and the length of attachment. By careful consideration of design parameters, the joint can be optimized. Finally, the failure loads of the single lap joints with and without attachments were predicted using different failure criteria.

  12. Low frequency ultrasonic nondestructive inspection of aluminum/adhesive fuselage lap splices

    SciTech Connect

    Patton, T.

    1994-01-04

    This thesis is a collection of research efforts in ultrasonics, conducted at the Center for Aviation Systems Reliability located at Iowa State University, as part of the Federal Aviation Administration`s ``Aging Aircraft Program.`` The research was directed toward the development of an ultrasonic prototype to inspect the aluminum/adhesive fuselage lap splices found on 1970`s vintage Boeing passenger aircraft. The ultrasonic prototype consists of a normal incidence, low frequency inspection technique, and a scanning adapter that allows focused immersion transducers to be operated in a direct contact manner in any inspection orientation, including upside-down. The inspection technique uses a computer-controlled data acquisition system to produce a C-scan image of a radio frequency (RF) waveform created by a low frequency, broadband, focused beam transducer, driven with a spike voltage pulser. C-scans produced by this technique are color representations of the received signal`s peak-to-peak amplitude (voltage) taken over an (x, y) grid. Low frequency, in this context, refers to a wavelength that is greater than the lap splice`s layer thicknesses. With the low frequency technique, interface echoes of the lap splice are not resolved and gating of the signal is unnecessary; this in itself makes the technique simple to implement and saves considerable time in data acquisition. Along with the advantages in data acquisition, the low frequency technique is relatively insensitive to minor surface curvature and to ultrasonic interference effects caused by adhesive bondline thickness variations in the lap splice.

  13. Evaluation of the fuselage lap joint fatigue and terminating action repair

    NASA Technical Reports Server (NTRS)

    Samavedam, Gopal; Thomson, Douglas; Jeong, David Y.

    1994-01-01

    Terminating action is a remedial repair which entails the replacement of shear head countersunk rivets with universal head rivets which have a larger shank diameter. The procedure was developed to eliminate the risk of widespread fatigue damage (WFD) in the upper rivet row of a fuselage lap joint. A test and evaluation program has been conducted by Foster-Miller, Inc. (FMI) to evaluate the terminating action repair of the upper rivet row of a commercial aircraft fuselage lap splice. Two full scale fatigue tests were conducted on fuselage panels using the growth of fatigue cracks in the lap joint. The second test was performed to evaluate the effectiveness of the terminating action repair. In both tests, cyclic pressurization loading was applied to the panels while crack propagation was recorded at all rivet locations at regular intervals to generate detailed data on conditions of fatigue crack initiation, ligament link-up, and fuselage fracture. This program demonstrated that the terminating action repair substantially increases the fatigue life of a fuselage panel structure and effectively eliminates the occurrence of cracking in the upper rivet row of the lap joint. While high cycle crack growth was recorded in the middle rivet row during the second test, failure was not imminent when the test was terminated after cycling to well beyond the service life. The program also demonstrated that the initiation, propagation, and linkup of WFD in full-scale fuselage structures can be simulated and quantitatively studied in the laboratory. This paper presents an overview of the testing program and provides a detailed discussion of the data analysis and results. Crack distribution and propagation rates and directions as well as frequency of cracking are presented for both tests. The progression of damage to linkup of adjacent cracks and to eventual overall panel failure is discussed. In addition, an assessment of the effectiveness of the terminating action repair and the

  14. Lap time variation and executive function in older adults: the Baltimore Longitudinal Study of Aging

    PubMed Central

    Tian, Qu; Simonsick, Eleanor M.; Resnick, Susan M.; Shardell, Michelle D.; Ferrucci, Luigi; Studenski, Stephanie A.

    2015-01-01

    Background: poor cognitive and motor performance predicts neurological dysfunction. Variable performance may be a subclinical indicator of emerging neurological problems. Objective: examine the cross-sectional association between a clinically accessible measure of variable walking and executive function. Methods: older adults aged 60 or older from the Baltimore Longitudinal Study of Aging (n = 811) with data on the 400-m walk test and cognition. Based on ten 40-m laps, we calculated mean lap time (MLT) and variation in time across ten 40-m laps (lap time variation, LTV). Executive function tests assessed attention and short-term memory (digit span forward and backward), psychomotor speed [Trail Making Test (TMT) part A] and multicomponent tasks requiring cognitive flexibility [TMT part B, part B-A (Delta TMT) and digit symbol substitution test (DSST)]. Multivariate linear regression analysis examined the cross-sectional association between LTV and executive function, adjusted for MLT, age, sex and education, as well as the LTV × MLT interaction. Results: the LTV was univariately associated with all executive function tests except digit span (P < 0.001); after adjustment, the association with TMT part A remained (standardised β = 0.142, P = 0.002). There was an interaction between MLT and LTV; among fast walkers, greater LTV was associated with a greater Delta TMT (β for LTV × MLT = −1.121, P = 0.016) after adjustment. Conclusion: at any walking speed, greater LTV is associated with psychomotor slowing. Among persons with faster walking speed, variation is associated with worse performance on a complex measure of cognitive flexibility. A simple measure of variability in walking time is independently associated with psychomotor slowing. PMID:26082177

  15. A Single-Lap Joint Adhesive Bonding Optimization Method Using Gradient and Genetic Algorithms

    NASA Technical Reports Server (NTRS)

    Smeltzer, Stanley S., III; Finckenor, Jeffrey L.

    1999-01-01

    A natural process for any engineer, scientist, educator, etc. is to seek the most efficient method for accomplishing a given task. In the case of structural design, an area that has a significant impact on the structural efficiency is joint design. Unless the structure is machined from a solid block of material, the individual components which compose the overall structure must be joined together. The method for joining a structure varies depending on the applied loads, material, assembly and disassembly requirements, service life, environment, etc. Using both metallic and fiber reinforced plastic materials limits the user to two methods or a combination of these methods for joining the components into one structure. The first is mechanical fastening and the second is adhesive bonding. Mechanical fastening is by far the most popular joining technique; however, in terms of structural efficiency, adhesive bonding provides a superior joint since the load is distributed uniformly across the joint. The purpose of this paper is to develop a method for optimizing single-lap joint adhesive bonded structures using both gradient and genetic algorithms and comparing the solution process for each method. The goal of the single-lap joint optimization is to find the most efficient structure that meets the imposed requirements while still remaining as lightweight, economical, and reliable as possible. For the single-lap joint, an optimum joint is determined by minimizing the weight of the overall joint based on constraints from adhesive strengths as well as empirically derived rules. The analytical solution of the sin-le-lap joint is determined using the classical Goland-Reissner technique for case 2 type adhesive joints. Joint weight minimization is achieved using a commercially available routine, Design Optimization Tool (DOT), for the gradient solution while an author developed method is used for the genetic algorithm solution. Results illustrate the critical design variables

  16. Spatial distribution of low energy plasma at comet 67P from Rosetta RPC-LAP measurements

    NASA Astrophysics Data System (ADS)

    Edberg, Niklas J. T.; Eriksson, Anders I.; Odelstad, Elias; Vigren, Erik; Henri, Pierre; Lebreton, Jean-Pierre; Mandt, Kathleen; Nilsson, Hans; Carr, Chris; Cupido, Emanuele; Vallat, Claire; Altwegg, Kathrin

    2015-04-01

    We present in situ measurements of the low energy plasma environment around comet 67P from the two Langmuir probes (LAP) on the Rosetta spacecraft, which form part of the Rosetta plasma consortium (RPC). RPC-LAP has operated almost continuously as Rosetta has orbited the comet at close distance (10-30 km) at low velocity (about 1 m/s) since August 2014. Using the RPC-LAP measurements we have produced global maps of the low energy plasma in the vicinity of 67P. Initial estimates indicate that the plasma density has reached values of several 100 cm^-3 and that the electron temperature has typically been in the range 5-10 eV, when the comet was beyond 2.5 AU from the sun. Photoionisation is the dominating process for producing the plasma around the comet while charge-exchange and impact ionisation may also contribute. The plasma environment has been found to be strongly coupled to the local neutral gas density, which in turn is coupled to which area on the comet is facing the sun. The northern summer neck-area of the comet outgasses more than other areas and above this region are the highest densities observed. In the southern winter and above the two main lobes of the comet body, the plasma density is lower. The plasma density is hence not determined by the solar wind, but by the outgassing from the comet. The 12.4-hour rotation period of the comet together with the varying latitude of the slow-moving Rosetta provide strong modulation of the RPC-LAP measurements. Besides orbiting the comet, Rosetta will also perform flybys of the comet in early 2015 when Rosetta will move to distances of several hundred kilometres from the nucleus. These flybys provide a cut-through view of the near-comet plasma environment, which will possibly give some insight to the solar-wind interaction with the cometary coma.

  17. Early evolution of comet 67P studied with the RPC-LAP onboard Rosetta

    NASA Astrophysics Data System (ADS)

    Miloch, Wojciech; Edberg, Niklas J. T.; Eriksson, Anders I.; Yang, Lei; Paulsson, Joakim J. P.; Wedlund, Cyril Simon; Odelstad, Elias

    2016-07-01

    The Rosetta mission provides the in-situ measurements of a comet that are closest to a comet's aphelion ever made. The Rosetta Plasma Consortium (RPC) is a set of five instruments on board the spacecraft that specialise in the measurements of the plasma environment of comet 67P. One of the instruments is RPC-LAP, which consists of two Langmuir Probes and can measure the density, temperature, and flow speed of the plasma in the vicinity of the comet. At the early stage of the Rosetta mission, when the spacecraft is far from the nucleus of comet 67P, the ion part of the current-voltage characteristics of RPC-LAP1 is dominated by the photoemission current which surpasses the currents from the dilute solar wind plasma. As Rosetta starts orbiting around the nucleus in September 2014, LAP1 picks up signatures of local plasma density enhancements corresponding to variations of water-group ions observed in the vicinity of the comet. With the help of current-voltage characteristics and the spacecraft potential, we identify and characterise in space and time the entering of this coma-dominated plasma. In particular we determine the transition for entering the ion dominated region characterised by the 6-hour variations in the local plasma density due to the comet rotation. This transition manifests as a steep gradient in the density with respect to the distance to the comet nucleus. We discuss these RPC-LAP results together with the corresponding measurements by other instruments to provide a comprehensive picture of the transition.

  18. Instrument for measurement of vacuum in sealed thin wall packets

    DOEpatents

    Kollie, T.G.; Thacker, L.H.; Fine, H.A.

    1995-04-18

    An instrument is disclosed for the measurement of vacuum within sealed packets, the packets having a wall that it can be deformed by the application of an external dynamic vacuum to an area thereof. The instrument has a detector head for placement against the deformable wall of the packet to apply the vacuum in a controlled manner to accomplish a limited deformation or lift of the wall with this deformation or lift monitored by the application of light as via a bifurcated light pipe. Retro-reflected light through the light pipe is monitored with a photo detector. A change (e.g., a decrease) of retro-reflected light signals the wall movement such that the value of the dynamic vacuum applied through the head be to achieve this initiation of movement is equal to the vacuum within the packet. In a preferred embodiment a vacuum plate is placed beneath the packet to ensure that no deformation occurs on the reverse surface of the packet. A vacuum can be applied to a recess in this vacuum plate, the value of which can be used to calibrate the vacuum transducer in the detector head. 4 figs.

  19. Instrument for measurement of vacuum in sealed thin wall packets

    DOEpatents

    Kollie, Thomas G.; Thacker, Louis H.; Fine, H. Alan

    1995-01-01

    An instrument for the measurement of vacuum within sealed packets 12, the packets 12 having a wall 14 that it can be deformed by the application of an external dynamic vacuum to an area thereof. The instrument has a detector head 18 for placement against the deformable wall 14 of the packet to apply the vacuum in a controlled manner to accomplish a limited deformation or lift of the wall 14, with this deformation or lift monitored by the application of light as via a bifurcated light pipe 20. Retro-reflected light through the light pipe is monitored with a photo detector 26. A change (e.g., a decrease) of retro-reflected light signals the wall movement such that the value of the dynamic vacuum applied through the head be to achieve this initiation of movement is equal to the vacuum within the packet 12. In a preferred embodiment a vacuum plate 44 is placed beneath the packet 12 to ensure that no deformation occurs on the reverse surface 16 of the packet. A vacuum can be applied to a recess in this vacuum plate, the value of which can be used to calibrate the vacuum transducer in the detector head.

  20. TCP Packet Trace Analysis. M.S. Thesis

    NASA Technical Reports Server (NTRS)

    Shepard, Timothy J.

    1991-01-01

    Examination of a trace of packets collected from the network is often the only method available for diagnosing protocol performance problems in computer networks. This thesis explores the use of packet traces to diagnose performance problems of the transport protocol TCP. Unfortunately, manual examination of these traces can be so tedious that effective analysis is not possible. The primary contribution of this thesis is a graphical method of displaying the packet trace which greatly reduce, the tediousness of examining a packet trace. The graphical method is demonstrated by the examination of some packet traces of typical TCP connections. The performance of two different implementations of TCP sending data across a particular network path is compared. Traces many thousands of packets long are used to demonstrate how effectively the graphical method simplifies examination of long complicated traces. In the comparison of the two TCP implementations, the burstiness of the TCP transmitter appeared to be related to the achieved throughput. A method of quantifying this burstiness is presented and its possible relevance to understanding the performance of TCP is discussed.

  1. Packet utilisation definitions for the ESA XMM mission

    NASA Technical Reports Server (NTRS)

    Nye, H. R.

    1994-01-01

    XMM, ESA's X-Ray Multi-Mirror satellite, due for launch at the end of 1999 will be the first ESA scientific spacecraft to implement the ESA packet telecommand and telemetry standards and will be the first ESOC-controlled science mission to take advantage of the new flight control system infrastructure development (based on object-oriented design and distributed-system architecture) due for deployment in 1995. The implementation of the packet standards is well defined at packet transport level. However, the standard relevant to the application level (the ESA Packet Utilization Standard) covers a wide range of on-board 'services' applicable in varying degrees to the needs of XMM. In defining which parts of the ESA PUS to implement, the XMM project first considered the mission objectives and the derived operations concept and went on to identify a minimum set of packet definitions compatible with these aspects. This paper sets the scene as above and then describes the services needed for XMM and the telecommand and telemetry packet types necessary to support each service.

  2. Probabilistic seismic performance assessment of lap-spliced RC columns retrofitted by steel wrapping jackets

    NASA Astrophysics Data System (ADS)

    Choi, Eunsoo; Youn, Heejung; Cho, Baik-Soon

    2016-06-01

    In this study, the seismic fragility curves of two reinforced concrete (RC) columns that were lap-spliced at the bottom and retrofitted with steel wrapping jackets were generated. Their seismic performance was probabilistically assessed in comparison to that of lap-spliced or continuous reinforcement RC columns. This study used two types of steel wrapping jackets, a full jacket and a split jacket. Analytical models of the four types of columns were developed based on the experimental results of the columns using OpenSEES, which is effective in conducting nonlinear time history analyses. A suite of ten artificial ground motions, modified from recorded ground motions, was used to perform nonlinear time history analyses of the analytical models with scaling of the peak ground acceleration from 0.1 g to 1.0 g in increments of 0.1 g. The steel wrapping jackets did not increase the medians for yield (slight damage state) of the lap-spiced column and did not exceed the corresponding median of the continuous reinforcement column. However, the two steel jackets increased the medians for failure by 1.872 and 2.017 times, respectively, and exceeded the corresponding median of the continuous reinforcement column by 11.8% and 20.5%, respectively.

  3. Enhancing pulsed eddy current for inspection of P-3 Orion lap-joint structures

    NASA Astrophysics Data System (ADS)

    Butt, D. M.; Underhill, P. R.; Krause, T. W.

    2016-02-01

    During flight, aircraft are subjected to cyclic loading. In the Lockheed P-3 Orion airframe, this cyclic loading can lead to development of fatigue cracks at steel fastener locations in the top and second layers of aluminum wing skin lap-joints. An inspection method that is capable of detecting these cracks, without fastener removal, is desirable as this can minimize aircraft downtime, while subsequently reducing the risk of collateral damage. The ability to detect second layer cracks has been demonstrated using a Pulsed Eddy Current (PEC) probe design that utilizes the ferrous fastener as a flux conduit. This allows for deeper penetration of flux into the lap-joint second layer and consequently, sensitivity to the presence of cracks. Differential pick-up coil pairs are used to sense the eddy current response due to the presence of a crack. The differential signal obtained from pick-up coils on opposing sides of the fastener is analyzed using a Modified Principal Components Analysis (MPCA). This is followed by a cluster analysis of the resulting MPCA scores to separate fastener locations with cracks from those without. Probe design features, data acquisition system parameters and signal post-processing can each have a strong impact on crack detection. Physical probe configurations and signal analysis processes, used to enhance the PEC system for detection of cracks in P-3 Orion lap-joint structures, are investigated and an enhanced probe design is identified.

  4. Large-scale Advanced Prop-fan (LAP) static rotor test report

    NASA Technical Reports Server (NTRS)

    Degeorge, Charles L.; Turnberg, Jay E.; Wainauski, Harry S.

    1987-01-01

    Discussed is Static Rotor Testing of the SR-7L Large Scale Advanced Prop-Fan (LAP). The LAP is an advanced 9 foot diameter, 8 bladed propeller designed and built by Hamilton Standard under contract to the NASA Lewis Research Center. The Prop-Fan employs thin swept blades to provide efficient propulsion at flight speeds up to Mach .85. Static Testing was conducted on a 10,000 HP whirl rig at Wright Patterson Air Force Base. The test objectives were to investigate the Prop-Fan static aerodynamic and structural dynamic performance, determine the blade steady state stressers and deflections and to measure steady and unsteady pressures on the SR-7L blade surface. The measured performance of the LAP correlated well with analytical predictions at blade pitch angles below 30 deg. A stall buffet phenomenon was observed at blade pitch angles above 30 deg. This phenomenon manifested itself by elevated blade vibratory stress levels and lower than expected thrust produced and power absorbed by the Prop-Fan for a given speed and blade angle.

  5. An On-Demand Emergency Packet Transmission Scheme for Wireless Body Area Networks

    PubMed Central

    Al Ameen, Moshaddique; Hong, Choong Seon

    2015-01-01

    The rapid developments of sensor devices that can actively monitor human activities have given rise to a new field called wireless body area network (BAN). A BAN can manage devices in, on and around the human body. Major requirements of such a network are energy efficiency, long lifetime, low delay, security, etc. Traffic in a BAN can be scheduled (normal) or event-driven (emergency). Traditional media access control (MAC) protocols use duty cycling to improve performance. A sleep-wake up cycle is employed to save energy. However, this mechanism lacks features to handle emergency traffic in a prompt and immediate manner. To deliver an emergency packet, a node has to wait until the receiver is awake. It also suffers from overheads, such as idle listening, overhearing and control packet handshakes. An external radio-triggered wake up mechanism is proposed to handle prompt communication. It can reduce the overheads and improve the performance through an on-demand scheme. In this work, we present a simple-to-implement on-demand packet transmission scheme by taking into considerations the requirements of a BAN. The major concern is handling the event-based emergency traffic. The performance analysis of the proposed scheme is presented. The results showed significant improvements in the overall performance of a BAN compared to state-of-the-art protocols in terms of energy consumption, delay and lifetime. PMID:26690161

  6. Intermediate SCDC Spanish Curricula Units. Science/Health, Unit 1, Kits 1-4, Supplement & Ditto Packet.

    ERIC Educational Resources Information Center

    Spanish Curricula Development Center, Miami Beach, FL.

    Visual aids and ditto masters for the first unit of a science/health curriculum for the intermediate level are included in this supplement and ditto packet. The visual aids are designed to help stimulate oral language and conceptual development through group activities and individual seatwork. Intended to help the teacher successfully carry out…

  7. Highly survivable communications: Complementary media packet switched networks

    NASA Astrophysics Data System (ADS)

    Yavuz, D.; Eken, F.; Karavassilis, N.

    1994-07-01

    The requirement for highly survivable communications (HSC) for essential command functions in military operations does not need any justification. The ability to communicate under extreme jamming levels and adverse propagation conditions, including high altitude nuclear events, is a very important requirement. There are also many natural disaster related requirements that also need such highly survivable communications. The prevalent and in a sense classical, approach to provide highly assured connectivity can be summarized as follows: Take a particular propagation medium and try to obtain the ultimate performance from it. There are many examples of this philosophy some successful, most not. Our approach, on the other hand, is to use complementary multi-media or mixed-media where communication links utilizing essentially commercial-off-the-shelf (COTS) equipment are integrated using packet radio (PR) techniques. There is also, in our view, an even more fundamental, recently discovered consideration why the expectation of continuous incremental refinement of a system using a given single media may be be achievable. This is derived from the theory of 'deterministic uncertainty' or more popularly known as 'theory of CHAOS', systems whose state space behavior has fractal characteristics. We will elaborate on this novel argument. Complementary multi-media approach has been the focus for all HSC communications activities at STC since 1982. The original STC studies and prototypes were in response to requirements of broadcasting (i.e., one-way transmission) information. A high frequency (HF)/meteorburst (MB) system was developed/prototyped/tested demonstrating the cost effectiveness of the approach. These results are reviewed. More recently, in 1992 STC has completed the development/test of an Open Systems Interconnection (OSI) HF packet radio protocol as no such open or non-proprietary protocol exists. This protocol has been fully tested, documented and made available to

  8. Congestion Control for a Fair Packet Delivery in WSN: From a Complex System Perspective

    PubMed Central

    2014-01-01

    In this work, we propose that packets travelling across a wireless sensor network (WSN) can be seen as the active agents that make up a complex system, just like a bird flock or a fish school, for instance. From this perspective, the tools and models that have been developed to study this kind of systems have been applied. This is in order to create a distributed congestion control based on a set of simple rules programmed at the nodes of the WSN. Our results show that it is possible to adapt the carried traffic to the network capacity, even under stressing conditions. Also, the network performance shows a smooth degradation when the traffic goes beyond a threshold which is settled by the proposed self-organized control. In contrast, without any control, the network collapses before this threshold. The use of the proposed solution provides an effective strategy to address some of the common problems found in WSN deployment by providing a fair packet delivery. In addition, the network congestion is mitigated using adaptive traffic mechanisms based on a satisfaction parameter assessed by each packet which has impact on the global satisfaction of the traffic carried by the WSN. PMID:25177722

  9. Effects of inter-packet spacing on the delivery of multimedia content

    SciTech Connect

    Kapadia, A. C.; Feng, A. C.; Feng, W. C.

    2001-01-01

    Streaming multimedia content with UDP has become increasingly popular over distributed systems such as the Internet. However, because UDP does not possess any congestion-control mechanism and most best-effort trafic is served by the congestion-controlled TCP, UDP flows steal bandwidth from TCP to the point that TCP flows can starve for network resources. Furthermore, such applications may cause the Internet infrastructure to eventually suffer from congestion collapse because UDP trafic does not self-regulate itself. To address this problem, next-generation Internet routers will implement active queue-management schemes to punish malicious traffic, e.g., non-adaptive UDP flows, and to the improve the performance of congestion-controlled traffic, e.g., TCP flows. The arrival of such routers will cripple the performance of today's UDP-based multimedia applications. So, in this paper, we introduce the notion of inter-packet spacing with control feedback to enable these UDP-based applications to perform well in the next-generation Internet while being adaptive and self-regulating. When compared with traditional UDP-based multimedia streaming, we illustrate that our counterintuitive, interpacket-spacing scheme with control feedback can reduce packet loss by 90% without adversely affecting delivered throughput. Keywords: network protocol, multimedia, packet spacing, rate-adjusting congestion control.

  10. Congestion control for a fair packet delivery in WSN: from a complex system perspective.

    PubMed

    Aguirre-Guerrero, Daniela; Marcelín-Jiménez, Ricardo; Rodriguez-Colina, Enrique; Pascoe-Chalke, Michael

    2014-01-01

    In this work, we propose that packets travelling across a wireless sensor network (WSN) can be seen as the active agents that make up a complex system, just like a bird flock or a fish school, for instance. From this perspective, the tools and models that have been developed to study this kind of systems have been applied. This is in order to create a distributed congestion control based on a set of simple rules programmed at the nodes of the WSN. Our results show that it is possible to adapt the carried traffic to the network capacity, even under stressing conditions. Also, the network performance shows a smooth degradation when the traffic goes beyond a threshold which is settled by the proposed self-organized control. In contrast, without any control, the network collapses before this threshold. The use of the proposed solution provides an effective strategy to address some of the common problems found in WSN deployment by providing a fair packet delivery. In addition, the network congestion is mitigated using adaptive traffic mechanisms based on a satisfaction parameter assessed by each packet which has impact on the global satisfaction of the traffic carried by the WSN. PMID:25177722

  11. Preparing a Resume: A Learning Activity for Ninth Grade Students in Introduction to Occupations.

    ERIC Educational Resources Information Center

    Hunter, Joan

    This study examines the analysis, design, development, implementation, and evaluation of an instructional development project addressing resume writing. The project produced a learning activity package (LAP) that guides ninth-grade students through the steps necessary to write a complete resume. The LAP was organized by the main sections placed in…

  12. Multi-echo processing by a bottlenose dolphin operating in "packet" transmission mode at long range.

    PubMed

    Finneran, James J; Schroth-Miller, Maddie; Borror, Nancy; Tormey, Megan; Brewer, Arial; Black, Amy; Bakhtiari, Kimberly; Goya, Gavin

    2014-11-01

    Bottlenose dolphins performing echolocation tasks at long ranges may utilize a transmission mode where bursts, or "packets," of echolocation clicks are emitted rather than single clicks. The clicks within each packet are separated by time intervals well below the two-way travel time, while the packets themselves are emitted at intervals greater than the two-way travel time. Packet use has been shown to increase with range; however, the exact function of packets and the advantages gained by their utilization remain unknown. In this study, the capability for dolphins to utilize multi-echo processing within packets of echoes was investigated by manipulating the number of available echoes within each packet as a dolphin performed a long-range echolocation task. The results showed an improvement in detectability with an increase in the number of echoes in each packet and suggest that packet use is an adaptation to allow multi-echo processing at long ranges without introducing range ambiguity.

  13. An effective packetization algorithm of LT codes for stable video streaming over wireless network

    NASA Astrophysics Data System (ADS)

    Lee, Dongju; Kim, Wan; Song, Hwangjun

    2011-09-01

    In this work, we propose an effective And-Or tree based packetization algorithm of Luby Transform (LT) codes to provide stable video streaming services by minimizing the deterioration of video streaming service quality caused by lost packets over error-prone wireless network. To accomplish our goal, the proposed packetization algorithm considers the relationships among encoded symbols of LT codes based on an And-Or tree analysis tool, and then puts the these encoded symbols into packets to minimize the packet loss effect during packet transmission and improve the decoding success rate of LT codes by reducing the correlations among packets. We conduct a mathematical analysis to prove performance of our packetization algorithm of LT codes compared with conventional packetization algorithm. Finally, the proposed system is fully implemented in Java and C/C++, and widely tested to show that the proposed packetization algorithm works reasonably well. The experimental results are provided to demonstrate that the proposed packetization algorithm supports more stable video streaming services with higher peak signal-to-nose ratio (PSNR) than the conventional packetization algorithm with various packet loss patterns, including random and burst packet loss patterns.

  14. Rydberg wave packets and half-cycle electromagnetic pulses

    NASA Astrophysics Data System (ADS)

    Raman, Chandra Shekar

    1997-08-01

    This dissertation summarizes an examination of the dynamics of atomic Rydberg wave packets with coherent pulses of THz electromagnetic radiation consisting of less than a single cycle of the electric field. The bulk of the energy is contained in just a half-cycle. Previous work (1, 10) has shown how these half-cycle pulses can be used to ionize the highly excited states of an atom, and that a classical view of electronic motion in the atom explains the ionization mechanism. To further probe the boundary between classical trajectories and quantum mechanics, in this work we investigate dynamical combinations of Rydberg states, or Rydberg wave packets, and how they ionize under the influence of a half-cycle electromagnetic pulse. With time-domain techniques we are able to extract the dynamics of the wave packet from the ionization rate. We then observe wave packet motion in both the electronic radial and angular coordinates, and can view it directly with the half-cycle pulse anywhere on its trajectory. This is the unique feature of half- cycle pulse ionization. Semiclassical ideas of ionization in conjunction with quantum descriptions of the wave packet, are capable of reproducing the main trends in our data, and in the absence of a rigorous model we rely on these. Experiments of this nature provide examples of the ongoing effort to use the coherent properties of radiation to control electronic motion in an atom, as well as to probe the boundaries between quantum and classical mechanics.

  15. Integrated optical buffers for packet-switched networks

    NASA Astrophysics Data System (ADS)

    Burmeister, Emily Frances

    Routers form the backbone of the Internet, directing data to the right locations with huge throughput capacity of terabits/second) and very few errors (1 error allowed in 1012 bits). However, as the Internet continues to grow rapidly, so must the capacity of electronic routers, thereby also growing in footprint and power consumption. The energy bill alone has developers looking for an alternate solution. Today's routers can only operate with electrical signals although Internet data is transmitted optically. This requires the data to be converted from the optical domain to the electrical domain and back again. Optical routers have the potential of saving in power by omitting these conversions, but have been held back in part by the lack of a practical optical memory device. This work presents the first integrated optical buffer for next generation optical packet-switched networks. Buffering is required in a router to move packets of data in order to avoid collisions between packets heading to the same destination at the same time. The device presented here uses an InP-based two-by-two switch with a silica waveguide delay to form a recirculating buffer. Packet storage was shown with 98% packet recovery for 5 circulations. Autonomous contention resolution was demonstrated with two buffered channels to show that the technology is a realistic solution for creating multiple element buffers on multiple router ports. This thesis proposes and demonstrates the first integrated optical random access memory, thereby making a great stride toward high capacity optical routers.

  16. Accumulation of plasmid-mediated fluoroquinolone resistance genes, qepA and qnrS1, in Enterobacter aerogenes co-producing RmtB and class A beta-lactamase LAP-1.

    PubMed

    Park, Yeon-Joon; Yu, Jin Kyung; Kim, Sang-Il; Lee, Kyungwon; Arakawa, Yoshichika

    2009-01-01

    A new plasmid-mediated fluoroquinolone efflux pump gene, qepA, is known to be associated with the rmtB gene, which confers high-level resistance to aminoglycosides. We investigated the qepA gene in 573 AmpC-producing Enterobacteriaceae including one Citrobacter freundii known to harbor rmtB. Of them, two clonally unrelated E. aerogenes harbored qepA. Both isolates co-harbored rmtB, qnrS1, qepA, and bla(LAP-1) on an IncFI type plasmid. The qepA was flanked by two copies of IS26 containing ISCR3C, tnpA, tnpR, bla(TEM), and rmtB. The qnrS1 and bla(LAP-1) were located upstream of qepA. All the resistance determinants (qepA, qnrS1, rmtB, and bla(LAP-1)) were co-transferred to E. coli J53 by filter mating from both isolates. Although the prevalence of qepA is currently low, considering the presence of ISCR3C and the possibility of co-selection and co-transferability of plasmids, more active surveillance for these multi-drug resistant bacteria and prudent use of antimicrobials are needed.

  17. Safety knowledge of users and non-users of the lap belt on two-point motorized belt systems.

    PubMed

    Lehto, M R; James, D S

    1997-11-01

    A field study of 1146 drivers and passengers of vehicles equipped with motorized passive belts was conducted in shopping malls and other locations in the states of Arizona and Indiana. The Indiana data was collected the summer of 1994 and the Arizona data the summer of 1995. Shoulder belt use by drivers and passengers was 93.4% in Indiana and 87.8% in Arizona. Lap belt use was 65% in Indiana and 69.9% in Arizona. Over 99% of drivers in both states knew that a manually fastened lap belt was provided along with the motorized shoulder belt. Most drivers agreed that they are supposed to wear the lap belt (96.3% in Indiana and 94.3% in Arizona) and said that the vehicle they were driving provided a warning signal when the lap belt was not fastened (75.7% in Indiana and 79.4% in Arizona). Most drivers were also aware of warning labels telling them to use their lap belt (63.9% in Indiana and 68.2% in Arizona).

  18. A New Reactive FMIPv6 Mechanism for Minimizing Packet Loss

    NASA Astrophysics Data System (ADS)

    Kim, Pyungsoo

    This paper considers a new reactive fast handover MIPv6 (FMIPv6) mechanism to minimize packet loss of the existing mechanism. The primary idea of the proposed reactive FMIPv6 mechanism is that the serving access router buffers packets toward the mobile node (MN) as soon as the link layer between MN and serving base station is disconnected. To implement the proposed mechanism, the router discovery message exchanged between MN and serving access router is extended. In addition, the IEEE 802.21 Media Independent Handover Function event service message is defined newly. Through analytic performance evaluation and experiments, the proposed reactive FMIPv6 mechanism can be shown to minimize packet loss much than the existing mechanism.

  19. Semiclassical Dynamics of Electron Wave Packet States with Phase Vortices

    SciTech Connect

    Bliokh, Konstantin Yu.; Bliokh, Yury P.; Savel'ev, Sergey; Nori, Franco

    2007-11-09

    We consider semiclassical higher-order wave packet solutions of the Schroedinger equation with phase vortices. The vortex line is aligned with the propagation direction, and the wave packet carries a well-defined orbital angular momentum (OAM) ({Dirac_h}/2{pi})l (l is the vortex strength) along its main linear momentum. The probability current coils around the momentum in such OAM states of electrons. In an electric field, these states evolve like massless particles with spin l. The magnetic-monopole Berry curvature appears in momentum space, which results in a spin-orbit-type interaction and a Berry/Magnus transverse force acting on the wave packet. This brings about the OAM Hall effect. In a magnetic field, there is a Zeeman interaction, which, can lead to more complicated dynamics.

  20. On-board congestion control for satellite packet switching networks

    NASA Technical Reports Server (NTRS)

    Chu, Pong P.

    1991-01-01

    It is desirable to incorporate packet switching capability on-board for future communication satellites. Because of the statistical nature of packet communication, incoming traffic fluctuates and may cause congestion. Thus, it is necessary to incorporate a congestion control mechanism as part of the on-board processing to smooth and regulate the bursty traffic. Although there are extensive studies on congestion control for both baseband and broadband terrestrial networks, these schemes are not feasible for space based switching networks because of the unique characteristics of satellite link. Here, we propose a new congestion control method for on-board satellite packet switching. This scheme takes into consideration the long propagation delay in satellite link and takes advantage of the the satellite's broadcasting capability. It divides the control between the ground terminals and satellite, but distributes the primary responsibility to ground terminals and only requires minimal hardware resource on-board satellite.

  1. Bufferless Ultra-High Speed All-Optical Packet Routing

    NASA Astrophysics Data System (ADS)

    Muttagi, Shrihari; Prince, Shanthi

    2011-10-01

    All-Optical network is still in adolescence to cope up with steep rise in data traffic at the backbone network. Routing of packets in optical network depends on the processing speed of the All-Optical routers, thus there is a need to enhance optical processing to curb the delay in packet forwarding unit. In the proposed scheme, the header processing takes place on fly, therefore processing delay is at its lower limit. The objective is to propose a framework which establishes high data rate transmission with least latency in data routing from source to destination. The Routing table and optical header pulses are converted into Pulse Position (PP) format, thus reducing the complexity and in turn the processing delay. Optical pulse matching is exercised which results in multi-output transmission. This results in ultra-high speed packet forwarding unit. In addition, this proposed scheme includes dispersion compensation unit, which makes the data reliable.

  2. Chiral wave-packet scattering in Weyl semimetals

    NASA Astrophysics Data System (ADS)

    Jiang, Qing-Dong; Jiang, Hua; Liu, Haiwen; Sun, Qing-Feng; Xie, X. C.

    2016-05-01

    In quantum mechanics, a particle is best described by the wave packet instead of the plane wave. Here, we study the wave-packet scattering problem in Weyl semimetals with the low-energy Weyl fermions of different chiralities. Our results show that the wave packet acquires a chirality-protected shift in the single-impurity scattering process. More importantly, the chirality-protected shift can lead to an anomalous scattering probability, and thus affects the transport properties in Weyl semimetals. We find that the ratio between the transport lifetime and the quantum lifetime increases sharply when the Fermi energy approaches the Weyl nodes, providing an explanation of the experimentally observed ultrahigh mobility in topological (Weyl or Dirac) semimetals.

  3. Using quantum dots to tag subsurface damage in lapped and polished glass samples

    SciTech Connect

    Williams, Wesley B.; Mullany, Brigid A.; Parker, Wesley C.; Moyer, Patrick J.; Randles, Mark H.

    2009-09-20

    Grinding, lapping, and polishing are finishing processes used to achieve critical surface parameters in a variety of precision optical and electronic components. As these processes remove material from the surface through mechanical and chemical interactions, they may induce a damaged layer of cracks, voids, and stressed material below the surface. This subsurface damage (SSD) can degrade the performance of a final product by creating optical aberrations due to diffraction, premature failure in oscillating components, and a reduction in the laser induced damage threshold of high energy optics. As these defects lie beneath the surface, they are difficult to detect, and while many methods are available to detect SSD, they can have notable limitations regarding sample size and type, preparation time, or can be destructive in nature. The authors tested a nondestructive method for assessing SSD that consisted of tagging the abrasive slurries used in lapping and polishing with quantum dots (nano-sized fluorescent particles). Subsequent detection of fluorescence on the processed surface is hypothesized to indicate SSD. Quantum dots that were introduced to glass surfaces during the lapping process were retained through subsequent polishing and cleaning processes. The quantum dots were successfully imaged by both wide field and confocal fluorescence microscopy techniques. The detected fluorescence highlighted features that were not observable with optical or interferometric microscopy. Atomic force microscopy and additional confocal microscope analysis indicate that the dots are firmly embedded in the surface but do not appear to travel deep into fractures beneath the surface. Etching of the samples exhibiting fluorescence confirmed that SSD existed. SSD-free samples exposed to quantum dots did not retain the dots in their surfaces, even when polished in the presence of quantum dots.

  4. TRMM and GPM: Radar Observations and Simulations with the Local Analysis and Prediction System (LAPS)

    NASA Astrophysics Data System (ADS)

    Albers, S. C.; Holub, K.; Xie, Y.

    2015-12-01

    The Local Analysis and Prediction System (LAPS), developed at NOAAs Earth System Research Laboratory is used for data assimilation, nowcasting, and model initialization/post-processing.It is a portable system and typically runs with a high resolution and rapid updateBlends a wide variety of in-situ and remotely sensed data sets (e.g. METARs, mesonets, radar, satellite)‏Here we test the assimilation of PMM radar data, using reflectivity obtained from the TRMM satellite, as a preparation for GPM. A case study for July 26 2013 with a small region of convection occurring over Florida. The 3-D LAPS domain is on a 1km grid and is producing analyses and forecasts.TRMM radar data was remapped to mimic the appearance of reflectivity in a ground-based radar over Florida.Three assimilation experiments are being performed using non-radar observations plus: TRMM radar, ground-based radar, and neither source of radar. We are comparing both analyses (initial condition) and forecasts where the WRF modelis initialized with the LAPS analysis. When evaluating the results we consider some big picture aspects in thatthe GPM Core Observatory radar coverage is limited in space and time and potentially less operational model benefit.To address this 4DVAR can help increase impact (particularly in a global model), since it spreads observations in time and space.The spreading in time also helps compensate for latency of the real-time data stream.We can also use GPM (core satellite) radar paired with microwave imager data to calibrate microwave data from other GPM constellation satellites. We thus can leverage more frequent satellite microwave passes compared with radar to assess hydrometeor climatological covariance between various species, fill in ice phase information.These relationships, leveraged from related climate research, help to provide constraints for our planned variational analysis improvements.

  5. A comparative study of the hydroxy acids from the Murchison, GRA 95229 and LAP 02342 meteorites

    NASA Astrophysics Data System (ADS)

    Pizzarello, Sandra; Wang, Yi; Chaban, Galina M.

    2010-11-01

    The hydroxy acid suites extracted from the Murchison (MN), GRA 95229 (GRA) and LAP 02342 (LAP) meteorites have been investigated for their molecular, chiral and isotopic composition. Substantial amounts of the compounds have been detected in all three meteorites, with a total abundance that is lower than that of the amino acids in the same stones. Overall, their molecular distributions mirror closely that of the corresponding amino acids and most evidently so for the LAP meteorite. A surprising L-lactic acid enantiomeric excess was found present in all three stones, which cannot be easily accounted by terrestrial contamination; all other compounds of the three hydroxy acid suites were found racemic. The branched-chain five carbon and the diastereomer six-carbon hydroxy acids were also studied vis-a-vis the corresponding amino acids and calculated ab initio thermodynamic data, with the comparison allowing the suggestion that meteoritic hydroxyacid at these chain lengths formed under thermodynamic control and, possibly, at a later stage than the corresponding amino acids. 13C and D isotopic enrichments were detected for many of the meteoritic hydroxy acids and found to vary between molecular species with trends that also appear to correlate to those of amino acids; the highest δD value (+3450‰) was displayed by GRA 2-OH-2-methylbutyric acid. The data suggest that, while the amino- and hydroxy acids likely relate to common presolar precursor, their final distribution in meteorites was determined to large extent by the overall composition of the environments that saw their formation, with ammonia being the determining factor in their final abundance ratios.

  6. Wave packet propagation across barriers by semiclassical initial value methods

    NASA Astrophysics Data System (ADS)

    Petersen, Jakob; Kay, Kenneth G.

    2015-07-01

    Semiclassical initial value representation (IVR) formulas for the propagator have difficulty describing tunneling through barriers. A key reason is that these formulas do not automatically reduce, in the classical limit, to the version of the Van Vleck-Gutzwiller (VVG) propagator required to treat barrier tunneling, which involves trajectories that have complex initial conditions and that follow paths in complex time. In this work, a simple IVR expression, that has the correct tunneling form in the classical limit, is derived for the propagator in the case of one-dimensional barrier transmission. Similarly, an IVR formula, that reduces to the Generalized Gaussian Wave Packet Dynamics (GGWPD) expression [D. Huber, E. J. Heller, and R. Littlejohn, J. Chem. Phys. 89, 2003 (1988)] in the classical limit, is derived for the transmitted wave packet. Uniform semiclassical versions of the IVR formulas are presented and simplified expressions in terms of real trajectories and WKB penetration factors are described. Numerical tests show that the uniform IVR treatment gives good results for wave packet transmission through the Eckart and Gaussian barriers in all cases examined. In contrast, even when applied with the proper complex trajectories, the VVG and GGWPD treatments are inaccurate when the mean energy of the wave packet is near the classical transmission threshold. The IVR expressions for the propagator and wave packet are cast as contour integrals in the complex space of initial conditions and these are generalized to potentially allow treatment of a larger variety of systems. A steepest descent analysis of the contour integral formula for the wave packet in the present cases confirms its relationship to the GGWPD method, verifies its semiclassical validity, and explains results of numerical calculations.

  7. Advances in integrated photonic circuits for packet-switched interconnection

    NASA Astrophysics Data System (ADS)

    Williams, Kevin A.; Stabile, Ripalta

    2014-03-01

    Sustained increases in capacity and connectivity are needed to overcome congestion in a range of broadband communication network nodes. Packet routing and switching in the electronic domain are leading to unsustainable energy- and bandwidth-densities, motivating research into hybrid solutions: optical switching engines are introduced for massive-bandwidth data transport while the electronic domain is clocked at more modest GHz rates to manage routing. Commercially-deployed optical switching engines using MEMS technologies are unwieldy and too slow to reconfigure for future packet-based networking. Optoelectronic packet-compliant switch technologies have been demonstrated as laboratory prototypes, but they have so far mostly used discretely pigtailed components, which are impractical for control plane development and product assembly. Integrated photonics has long held the promise of reduced hardware complexity and may be the critical step towards packet-compliant optical switching engines. Recently a number of laboratories world-wide have prototyped optical switching circuits using monolithic integration technology with up to several hundreds of integrated optical components per chip. Our own work has focused on multi-input to multi-output switching matrices. Recently we have demonstrated 8×8×8λ space and wavelength selective switches using gated cyclic routers and 16×16 broadband switching chips using monolithic multi-stage networks. We now operate these advanced circuits with custom control planes implemented with FPGAs to explore real time packet routing in multi-wavelength, multi-port test-beds. We review our contributions in the context of state of the art photonic integrated circuit technology and packet optical switching hardware demonstrations.

  8. Bolted Double-Lap Composite Joints Under Mechanical and Thermal Loading

    NASA Technical Reports Server (NTRS)

    Kradinov, V.; Barut, A.; Madenci, E.; Walker, Sandra P. (Technical Monitor)

    2000-01-01

    This study concerns the determination of the contact stresses and contact region around bolt holes and the bolt load distribution in single- and double-lap joints of composite laminates with arbitrarily located bolts under general mechanical loading conditions and uniform temperature change. The unknown contact stress distribution and contact region between the bolt and laminates and the interaction among the bolts require the bolt load distribution, as well as the contact stresses, to be as part of the solution. The present method is based on the complex potential theory and the variational formulation in order to account for bolt stiffness, bolt-hole clearance, and finite geometry of the composite laminates.

  9. On the determination of diffusion lengths by means of angle-lapped p-n junctions

    NASA Technical Reports Server (NTRS)

    Von Roos, O.

    1979-01-01

    A standard procedure for determining the minority carrier diffusion length by means of SEM consists of scanning an angle-lapped surface of a p-n junction and measuring the resulting short circuit current as a function of beam position. The present paper points out that the usual expression linking the short circuit current induced by the electron beam to the angle between the semiconductor surface and the junction plane is incorrect. The correct expression is discussed and it is noted that, for angles less than 10 deg, the new and the old expression are practically indistinguishable.

  10. Lap belt complex. Recognition & assessment of seatbelt injuries in pediatric trauma patients.

    PubMed

    Jordan, B

    2001-05-01

    That seatbelts save lives is irrefutable. Every health-care professional should advocate parents use proper restraint systems for their children. Resource guides are available from local, state and national organizations regarding proper restraint usage for the pediatric population. However, children restrained with lap belts are at risk of sustaining an occult injury. You must quickly stabilize the ABCs, immobilize the spine and get the patient en route to a trauma center while you perform a solid baseline assessment. The trauma team needs information on kinetics, type of restraints used, assessment findings and treatment rendered so they can accurately assess subtle changes in the patient's condition and initiate proper treatment.

  11. Traumatic disruption of the abdominal wall: lap-belt injuries in children.

    PubMed

    Moremen, Jacob R; Nakayama, Don K; Ashley, Dennis W; Astin, Matthew; Nolan, Tracy L

    2013-04-01

    Traumatic abdominal wall hernia (TAWH) from high speed mechanism is a unique finding in adult trauma, and exceedingly rare in pediatrics. The majority of reports are of low-speed "handlebar" hernias associated with direct injury by bicycle handlebars. We report a series of three pediatric patients in motor vehicle collisions (MVC) who experienced TAWH by lap-belt and associated intra-abdominal injuries necessitating immediate operative intervention. Different operative approaches were used in each case to manage the varying types of disruptions. This adds to the pediatric literature the largest series of its kind.

  12. The Open Host Network Packet Process Correlator for Windows

    2014-06-17

    The Hone sensors are packet-process correlation engines that log the relationships between applications and the communications they are responsible for. Hone sensors are available for a variety of platforms including Linux, Windows, and MacOSX. Hone sensors are designed to help analysts understand the meaning of communications on a deeper level by associating the origin or destination process to the communication. They do this by tracing communications on a per-packet basis, through the kernel of themore » operating system to determine their ultimate source/destination on the monitored machine.« less

  13. Wave packet dynamics under effect of a pulsed electric field

    NASA Astrophysics Data System (ADS)

    da Silva, A. R. C. B.; de Moura, F. A. B. F.; Dias, W. S.

    2016-06-01

    We studied the dynamics of an electron in a crystalline one-dimensional model under effect of a time-dependent Gaussian field. The time evolution of an initially Gaussian wave packet it was obtained through the numerical solution of the time-dependent Schrödinger equation. Our analysis consists of computing the electronic centroid as well as the mean square displacement. We observe that the electrical pulse is able to promote a special kind of displacement along the chain. We demonstrated a direct relation between the group velocity of the wave packet and the applied electrical pulses. We compare those numerical calculations with a semi-classical approach.

  14. The Open Host Network Packet Process Correlator for Windows

    SciTech Connect

    2014-06-17

    The Hone sensors are packet-process correlation engines that log the relationships between applications and the communications they are responsible for. Hone sensors are available for a variety of platforms including Linux, Windows, and MacOSX. Hone sensors are designed to help analysts understand the meaning of communications on a deeper level by associating the origin or destination process to the communication. They do this by tracing communications on a per-packet basis, through the kernel of the operating system to determine their ultimate source/destination on the monitored machine.

  15. Control with a random access protocol and packet dropouts

    NASA Astrophysics Data System (ADS)

    Wang, Liyuan; Guo, Ge

    2016-08-01

    This paper investigates networked control systems whose actuators communicate with the controller via a limited number of unreliable channels. The access to the channels is decided by a so-called group random access protocol, which is modelled as a binary Markov sequence. Data packet dropouts in the channels are modelled as independent Bernoulli processes. For such systems, a systematic characterisation for controller synthesis is established and stated in terms of the transition probabilities of the Markov protocol and the packet dropout probabilities. The results are illustrated via a numerical example.

  16. Gabor Wave Packet Method to Solve Plasma Wave Equations

    SciTech Connect

    A. Pletzer; C.K. Phillips; D.N. Smithe

    2003-06-18

    A numerical method for solving plasma wave equations arising in the context of mode conversion between the fast magnetosonic and the slow (e.g ion Bernstein) wave is presented. The numerical algorithm relies on the expansion of the solution in Gaussian wave packets known as Gabor functions, which have good resolution properties in both real and Fourier space. The wave packets are ideally suited to capture both the large and small wavelength features that characterize mode conversion problems. The accuracy of the scheme is compared with a standard finite element approach.

  17. Symmetry and conservation laws in semiclassical wave packet dynamics

    SciTech Connect

    Ohsawa, Tomoki

    2015-03-15

    We formulate symmetries in semiclassical Gaussian wave packet dynamics and find the corresponding conserved quantities, particularly the semiclassical angular momentum, via Noether’s theorem. We consider two slightly different formulations of Gaussian wave packet dynamics; one is based on earlier works of Heller and Hagedorn and the other based on the symplectic-geometric approach by Lubich and others. In either case, we reveal the symplectic and Hamiltonian nature of the dynamics and formulate natural symmetry group actions in the setting to derive the corresponding conserved quantities (momentum maps). The semiclassical angular momentum inherits the essential properties of the classical angular momentum as well as naturally corresponds to the quantum picture.

  18. Zeno dynamics in wave-packet diffraction spreading

    SciTech Connect

    Porras, Miguel A.; Luis, Alfredo; Gonzalo, Isabel; Sanz, Angel S.

    2011-11-15

    We analyze a simple and feasible practical scheme displaying Zeno, anti-Zeno, and inverse-Zeno effects in the observation of wave-packet spreading caused by free evolution. The scheme is valid both in spatial diffraction of classical optical waves and in time diffraction of a quantum wave packet. In the optical realization, diffraction spreading is observed by placing slits between a light source and a light-power detector. We show that the occurrence of Zeno or anti-Zeno effects depends just on the frequency of observations between the source and detector. These effects are seen to be related to the diffraction mode theory in Fabry-Perot resonators.

  19. Short-time Chebyshev wave packet method for molecular photoionization

    NASA Astrophysics Data System (ADS)

    Sun, Zhaopeng; Zheng, Yujun

    2016-08-01

    In this letter we present the extended usage of short-time Chebyshev wave packet method in the laser induced molecular photoionization dynamics. In our extension, the polynomial expansion of the exponential in the time evolution operator, the Hamiltonian operator can act on the wave packet directly which neatly avoids the matrix diagonalization. This propagation scheme is of obvious advantages when the dynamical system has large Hamiltonian matrix. Computational simulations are performed for the calculation of photoelectronic distributions from intense short pulse ionization of K2 and NaI which represent the Born-Oppenheimer (BO) model and Non-BO one, respectively.

  20. Alfvénic wave packets collision in a kinetic plasma

    NASA Astrophysics Data System (ADS)

    Pezzi, Oreste; Parashar, Tulasi N.; Servidio, Sergio; Valentini, Francesco; Malara, Francesco; Matthaeus, William H.; Veltri, Pierluigi

    2016-04-01

    The problem of two colliding and counter-propagating Alfvénic wave packets has been investigated in detail since the late Seventies. In particular Moffatt [1] and Parker [2] showed that, in the framework of the incompressible magnetohydrodynamics (MHD), nonlinear interactions can develop only during the overlapping of the two packets. Here we describe a similar problem in the framework of the kinetic physics. The collision of two quasi-Alfvénic packets has been analyzed by means of MHD, Hall-MHD and kinetic simulations performed with two different hybrid codes: a PIC code [3] and a Vlasov-Maxwell code [4]. Due to the huge computational cost, only a 2D-3V phase space is allowed (two dimensions in the physical space, three dimensions in the velocity space). Preliminary results suggest that, as well as in the MHD case, the most relevant nonlinear effects occur during the overlapping of the two packets. For both the PIC and Vlasov cases, strong temperature anisotropies are present during the evolution of the wave packets. Moreover, due to the absence of numerical noise, Vlasov simulations show that the collision of the counter-propagating solitary waves produces a significant beam in the velocity distribution functions [5], which, instead, cannot be appreciated in PIC simulations. We remark that, beyond the interest of studying a well-known MHD problem in the realm of the kinetic physics, our results allows also to compare different numerical codes. [1] H.K. Moffatt, Field generation in electrically conducting fluids (Cambridge University Press, 1978). [2] E.N. Parker, Cosmical magnetic fields: their origin and their activity (Oxford University Press, 1979). [3] T.N. Parashar, M.A. Shay, P.A. Cassak and W.H. Matthaeus, Physics of Plasmas 16, 032310 (2009). [4] F. Valentini, P. Trávníček, F. Califano, P. Hellinger & A. Mangeney, Journal of Computational Physics 225, 753-770 (2007). [5] J. He, C. Tu, E. Marsch, C.H. Chen, L. Wang, Z. Pei, L. Zhang, C.S. Salem and S

  1. Endovascular management of lap belt-related abdominal aortic injury in a 9-year-old child.

    PubMed

    Papazoglou, Konstantinos O; Karkos, Christos D; Kalogirou, Thomas E; Giagtzidis, Ioakeim T

    2015-02-01

    Blunt abdominal aortic trauma is a rare occurrence in children with only a few patients having been reported in the literature. Most such cases have been described in the context of lap belt injuries. We report a 9-year-old boy who suffered lap belt trauma to the abdomen during a high-speed road traffic accident resulting to the well-recognized pattern of blunt abdominal injury, that is, the triad of intestinal perforation, fractures of the lumbar spine, and abdominal aortic injury. The latter presented with lower limb ischemia due to dissection of the infrarenal aorta and right common iliac artery. Revascularization was achieved by endovascular means using 2 self-expanding stents in the infrarenal aorta and the right common iliac artery. This case is one of the few reports of lap belt-related acute traumatic abdominal aortic dissection in a young child and highlights the feasibility of endovascular management in the pediatric population. PMID:25463338

  2. Acute cervical spinal cord injury secondary to air bag deployment without proper use of lap or shoulder harnesses.

    PubMed

    Hart, R A; Mayberry, J C; Herzberg, A M

    2000-02-01

    The authors present a case report of a patient with cervical central spinal cord syndrome caused by a hyperextension injury after a motor vehicle collision in which the air bag deployed in the absence of shoulder or lap belt harnesses. The potential for cervical spine and spinal cord hyperextension injuries in passengers positioned in front of air bags without proper use of shoulder or lap belt harnesses is discussed. Cervical central spinal cord quadriplegia occurred with cervical spondylosis and kyphosis that was managed by early three-level cervical corpectomy in a 58-year-old patient. Early improvement in the patient's neurological status occurred but was incomplete at the time of this report. Cervical hyperextension injuries are possible in passengers positioned in the front seat of cars with air bags when shoulder or lap belt harnesses are not used properly. Previous biomechanical studies have documented the potential for these types of injuries.

  3. Endovascular management of lap belt-related abdominal aortic injury in a 9-year-old child.

    PubMed

    Papazoglou, Konstantinos O; Karkos, Christos D; Kalogirou, Thomas E; Giagtzidis, Ioakeim T

    2015-02-01

    Blunt abdominal aortic trauma is a rare occurrence in children with only a few patients having been reported in the literature. Most such cases have been described in the context of lap belt injuries. We report a 9-year-old boy who suffered lap belt trauma to the abdomen during a high-speed road traffic accident resulting to the well-recognized pattern of blunt abdominal injury, that is, the triad of intestinal perforation, fractures of the lumbar spine, and abdominal aortic injury. The latter presented with lower limb ischemia due to dissection of the infrarenal aorta and right common iliac artery. Revascularization was achieved by endovascular means using 2 self-expanding stents in the infrarenal aorta and the right common iliac artery. This case is one of the few reports of lap belt-related acute traumatic abdominal aortic dissection in a young child and highlights the feasibility of endovascular management in the pediatric population.

  4. Interfacial and Mechanical Behavior of AA5456 Filling Friction-Stir-Welded Lap Joints Using Similar and Dissimilar Pins

    NASA Astrophysics Data System (ADS)

    Behmand, Saleh Alaei; Mirsalehi, Seyyed Ehsan; Omidvar, Hamid; Safarkhanian, Mohammad Ali

    2016-10-01

    In this article, filling friction stir welding (FFSW) of the remaining exit holes of AA5456 alloy friction-stir-welded lap joints was studied. For this purpose, the influences of different rotating speeds, holding times, and pin materials, AA5456 and AA2024, on the metallurgical structure and joint strength were investigated. The observations showed that defect-free lap joints are successfully obtainable by this method using similar and dissimilar consumable pins. The results indicated that the higher rotating speed and holding time adversely affect the weld performance. The best result was achieved for 30 seconds holding time, 500 rpm rotating speed, and AA2024 consumable pin. In this condition, a lap shear strength of 10 pct higher than that of the nonfilled joint, equivalent to about 94 pct of the original defect-free FSW joint, was obtained, whereas the GTAW filled joint showed only approximately 87 pct of the continuous FSW joint strength.

  5. Interfacial and Mechanical Behavior of AA5456 Filling Friction-Stir-Welded Lap Joints Using Similar and Dissimilar Pins

    NASA Astrophysics Data System (ADS)

    Behmand, Saleh Alaei; Mirsalehi, Seyyed Ehsan; Omidvar, Hamid; Safarkhanian, Mohammad Ali

    2016-06-01

    In this article, filling friction stir welding (FFSW) of the remaining exit holes of AA5456 alloy friction-stir-welded lap joints was studied. For this purpose, the influences of different rotating speeds, holding times, and pin materials, AA5456 and AA2024, on the metallurgical structure and joint strength were investigated. The observations showed that defect-free lap joints are successfully obtainable by this method using similar and dissimilar consumable pins. The results indicated that the higher rotating speed and holding time adversely affect the weld performance. The best result was achieved for 30 seconds holding time, 500 rpm rotating speed, and AA2024 consumable pin. In this condition, a lap shear strength of 10 pct higher than that of the nonfilled joint, equivalent to about 94 pct of the original defect-free FSW joint, was obtained, whereas the GTAW filled joint showed only approximately 87 pct of the continuous FSW joint strength.

  6. Using DNA devices to track anticancer drug activity.

    PubMed

    Kahanda, Dimithree; Chakrabarti, Gaurab; Mcwilliams, Marc A; Boothman, David A; Slinker, Jason D

    2016-06-15

    It is beneficial to develop systems that reproduce complex reactions of biological systems while maintaining control over specific factors involved in such processes. We demonstrated a DNA device for following the repair of DNA damage produced by a redox-cycling anticancer drug, beta-lapachone (β-lap). These chips supported ß-lap-induced biological redox cycle and tracked subsequent DNA damage repair activity with redox-modified DNA monolayers on gold. We observed drug-specific changes in square wave voltammetry from these chips at therapeutic ß-lap concentrations of high statistical significance over drug-free control. We also demonstrated a high correlation of this change with the specific ß-lap-induced redox cycle using rational controls. The concentration dependence of ß-lap revealed significant signal changes at levels of high clinical significance as well as sensitivity to sub-lethal levels of ß-lap. Catalase, an enzyme decomposing peroxide, was found to suppress DNA damage at a NQO1/catalase ratio found in healthy cells, but was clearly overcome at a higher NQO1/catalase ratio consistent with cancer cells. We found that it was necessary to reproduce key features of the cellular environment to observe this activity. Thus, this chip-based platform enabled tracking of ß-lap-induced DNA damage repair when biological criteria were met, providing a unique synthetic platform for uncovering activity normally confined to inside cells. PMID:26901461

  7. Early Childhood Motor Skills Information Packet.

    ERIC Educational Resources Information Center

    Juelsgaard, Cheri

    This activity book is designed to assist teachers in enhancing preschool children's motor skills, physical development, and social skills, and to build young children's self-esteem. The activities are designed for both disabled and nondisabled children. The first section of the book suggests specific activities in 13 categories of motor skills:…

  8. Joint source coding, transport processing, and error concealment for H.323-based packet video

    NASA Astrophysics Data System (ADS)

    Zhu, Qin-Fan; Kerofsky, Louis

    1998-12-01

    In this paper, we investigate how to adapt different parameters in H.263 source coding, transport processing and error concealment to optimize end-to-end video quality at different bitrates and packet loss rates for H.323-based packet video. First different intra coding patterns are compared and we show that the contiguous rectangle or square block pattern offers the best performance in terms of video quality in the presence of packet loss. Second, the optimal intra coding frequency is found for different bitrates and packet loss rates. The optimal number of GOB headers to be inserted in the source coding is then determined. The effect of transport processing strategies such as packetization and retransmission is also examined. For packetization, the impact of packet size and the effect of macroblock segmentation to picture quality are investigated. Finally, we show that the dejitter buffering delay can be used to the advantage for packet loss recovery with video retransmission without incurring any extra delay.

  9. A multi-ring optical packet and circuit integrated network with optical buffering.

    PubMed

    Furukawa, Hideaki; Shinada, Satoshi; Miyazawa, Takaya; Harai, Hiroaki; Kawasaki, Wataru; Saito, Tatsuhiko; Matsunaga, Koji; Toyozumi, Tatuya; Wada, Naoya

    2012-12-17

    We newly developed a 3 × 3 integrated optical packet and circuit switch-node. Optical buffers and burst-mode erbium-doped fiber amplifiers with the gain flatness are installed in the 3 × 3 switch-node. The optical buffer can prevent packet collisions and decrease packet loss. We constructed a multi-ring optical packet and circuit integrated network testbed connecting two single-ring networks and a client network by the 3 × 3 switch-node. For the first time, we demonstrated 244 km fiber transmission and 5-node hopping of multiplexed 14-wavelength 10 Gbps optical paths and 100 Gbps optical packets encapsulating 10 Gigabit Ethernet frames on the testbed. Error-free (frame error rate < 1 × 10(-4)) operation was achieved with optical packets of various packet lengths. In addition, successful avoidance of packet collisions by optical buffers was confirmed.

  10. Contributions of kinematics and viscoelastic lap deformation on the suface figure during full aperture polishing of fused silica

    SciTech Connect

    Suratwala, T I; Steele, R A; Feit, M D

    2007-10-09

    A typical optical fabrication process involves a series of basic process steps including: (1) shaping, (2) grinding, (3) polishing, and sometimes (4) sub-aperture tool finishing. With significant innovation and development over the years in both the front end (shaping using CNC machines) and the back end (sup-aperture tool polishing), these processes have become much more deterministic. However, the intermediate stages (full aperture grinding/polishing) in the process, which can be very time consuming, still have much reliance on the optician's insight to get to the desired surface figure. Such processes are not presently very deterministic (i.e. require multiple iterations to get desired figure). The ability to deterministically finish an optical surface using a full aperture grinding/polishing will aid optical glass fabricators to achieve desired figure in a more repeatable, less iterative, and more economical manner. Developing a scientific understanding of the material removal rate is a critical step in accomplishing this. In the present study, the surface figure and material removal rate of a fused silica workpiece is measured as a function of polishing time using Ceria based slurry on a polyurethane pad or pitch lap under a variety of kinematic conditions (motion of the workpiece and lap) and loading configurations. The measured results have been applied to expand the Preston model of material removal (utilizing chemical, mechanical and tribological effects). The results show that under uniform loading, the surface figure is dominated by kinematics which can be predicted by calculating the relative velocity (between the workpiece and the lap) with time and position on the workpiece. However, in the case where the kinematics predict a time-averaged removal function over the workpiece that is uniform, we find experimentally that the surface deviates significantly from uniform removal. We show that this non-uniform removal is caused by the non-uniform stress

  11. Multifrequency Eddy Current Inspection of Corrosion in Clad Aluminum Riveted Lap Joints and Its Effect on Fatigue Life

    SciTech Connect

    Okafor, A. C.; Natarajan, S.

    2007-03-21

    Aging aircraft are prone to corrosion damage and fatigue cracks in riveted lap joints of fuselage skin panels. This can cause catastrophic failure if not detected and repaired. Hence detection of corrosion damage and monitoring its effect on structural integrity are essential. This paper presents multifrequency eddy current (EC) inspection of corrosion damage and machined material loss defect in clad A1 2024-T3 riveted lap joints and its effect on fatigue life. Results of eddy current inspection, corrosion product removal and fatigue testing are presented.

  12. Multifrequency Eddy Current Inspection of Corrosion in Clad Aluminum Riveted Lap Joints and Its Effect on Fatigue Life

    NASA Astrophysics Data System (ADS)

    Okafor, A. C.; Natarajan, S.

    2007-03-01

    Aging aircraft are prone to corrosion damage and fatigue cracks in riveted lap joints of fuselage skin panels. This can cause catastrophic failure if not detected and repaired. Hence detection of corrosion damage and monitoring its effect on structural integrity are essential. This paper presents multifrequency eddy current (EC) inspection of corrosion damage and machined material loss defect in clad A1 2024-T3 riveted lap joints and its effect on fatigue life. Results of eddy current inspection, corrosion product removal and fatigue testing are presented.

  13. Monitoring of fatigue damage in composite lap-joints using guided waves and FBG sensors

    NASA Astrophysics Data System (ADS)

    Karpenko, Oleksii; Khomenko, Anton; Koricho, Ermias; Haq, Mahmoodul; Udpa, Lalita

    2016-02-01

    Adhesive bonding is being increasingly employed in many applications as it offers possibility of light-weighting and efficient multi-material joining along with reduction in time and cost of manufacturing. However, failure initiation and progression in critical components like joints, specifically in fatigue loading is not well understood, which necessitates reliable NDE and SHM techniques to ensure structural integrity. In this work, concurrent guided wave (GW) and fiber Bragg grating (FBG) sensor measurements were used to monitor fatigue damage in adhesively bonded composite lap-joints. In the present set-up, one FBG sensor was strategically embedded in the adhesive bond-line of a lap-joint, while two other FBGs were bonded on the surface of the adherends. Full spectral responses of FBG sensors were collected and compared at specific intervals of fatigue loading. In parallel, guided waves were actuated and sensed using PZT wafers mounted on the composite adherends. Experimental results demonstrated that time-of-flight (ToF) of the fundamental modes transmitted through the bond-line and spectral response of FBG sensors were sensitive to fatigue loading and damage. Combination of guided wave and FBG measurements provided the desired redundancy and synergy in the data to evaluate the degradation in bond-line properties. Measurements taken in the presence of continuously applied load replicated the in-situ/service conditions. The approach shows promise in understanding the behavior of bonded joints subjected to complex loading.

  14. Lap Shear and Impact Testing of Ochre and Beeswax in Experimental Middle Stone Age Compound Adhesives.

    PubMed

    Kozowyk, P R B; Langejans, G H J; Poulis, J A

    2016-01-01

    The production of compound adhesives using disparate ingredients is seen as some of the best evidence of advanced cognition outside of the use of symbolism. Previous field and laboratory testing of adhesives has shown the complexities involved in creating an effective Middle Stone Age glue using Acacia gum. However, it is currently unclear how efficient different adhesive recipes are, how much specific ingredients influence their performance, and how difficult it may have been for those ingredients to be combined to maximum effect. We conducted a series of laboratory-based lap shear and impact tests, following modern adhesion testing standards, to determine the efficacy of compound adhesives, with particular regard to the ingredient ratios. We tested rosin (colophony) and gum adhesives, containing additives of beeswax and ochre in varying ratios. During both lap shear and impact tests compound rosin adhesives performed better than single component rosin adhesives, and pure acacia gum was the strongest. The large difference in performance between each base adhesive and the significant changes in performance that occur due to relatively small changes in ingredient ratios lend further support to the notion that high levels of skill and knowledge were required to consistently produce the most effective adhesives.

  15. Digital signal processing using lapped transforms with variable parameter windows and orthonormal bases

    NASA Astrophysics Data System (ADS)

    Raduenz, Brian D.

    1992-12-01

    A number of new concepts and tools for the analysis of signals using variable overlapped windows and orthonormal bases are developed and evaluated. Windowing, often employed as a spectral estimation technique, can result in irreparable distortions in the transformed signal. By placing conditions on the window and incorporating it into the orthonormal representation, any signal distortion resulting from the transformation can be eliminated or cancelled in reconstruction. This concept is critical to the theory discussed. As part of this evaluation, a tensor product based general N-point fast Fourier transform algorithm was implemented in the DOD standard language, Ada. The most prevalent criticism of Ada is slow execution time. This code is shown to be comparable in execution time performance to the corresponding FORTRAN code. Also, a new paradigm is presented for solving the finite length data problem associated with filter banks and lapped transforms. This result could have significant importance in many Air Force applications, such as processing images in which the objects of interest are near the borders. Additionally, a limited number of experiments were performed with the coding of speech. The results indicate the lapped transform evaluated has potential as a low bit rate speech coder.

  16. Lap Shear and Impact Testing of Ochre and Beeswax in Experimental Middle Stone Age Compound Adhesives

    PubMed Central

    2016-01-01

    The production of compound adhesives using disparate ingredients is seen as some of the best evidence of advanced cognition outside of the use of symbolism. Previous field and laboratory testing of adhesives has shown the complexities involved in creating an effective Middle Stone Age glue using Acacia gum. However, it is currently unclear how efficient different adhesive recipes are, how much specific ingredients influence their performance, and how difficult it may have been for those ingredients to be combined to maximum effect. We conducted a series of laboratory-based lap shear and impact tests, following modern adhesion testing standards, to determine the efficacy of compound adhesives, with particular regard to the ingredient ratios. We tested rosin (colophony) and gum adhesives, containing additives of beeswax and ochre in varying ratios. During both lap shear and impact tests compound rosin adhesives performed better than single component rosin adhesives, and pure acacia gum was the strongest. The large difference in performance between each base adhesive and the significant changes in performance that occur due to relatively small changes in ingredient ratios lend further support to the notion that high levels of skill and knowledge were required to consistently produce the most effective adhesives. PMID:26983080

  17. Large-Scale Advanced Prop-Fan (LAP) pitch change actuator and control design report

    NASA Technical Reports Server (NTRS)

    Schwartz, R. A.; Carvalho, P.; Cutler, M. J.

    1986-01-01

    In recent years, considerable attention has been directed toward improving aircraft fuel consumption. Studies have shown that the high inherent efficiency previously demonstrated by low speed turboprop propulsion systems may now be extended to today's higher speed aircraft if advanced high-speed propeller blades having thin airfoils and aerodynamic sweep are utilized. Hamilton Standard has designed a 9-foot diameter single-rotation Large-Scale Advanced Prop-Fan (LAP) which will be tested on a static test stand, in a high speed wind tunnel and on a research aircraft. The major objective of this testing is to establish the structural integrity of large-scale Prop-Fans of advanced construction in addition to the evaluation of aerodynamic performance and aeroacoustic design. This report describes the operation, design features and actual hardware of the (LAP) Prop-Fan pitch control system. The pitch control system which controls blade angle and propeller speed consists of two separate assemblies. The first is the control unit which provides the hydraulic supply, speed governing and feather function for the system. The second unit is the hydro-mechanical pitch change actuator which directly changes blade angle (pitch) as scheduled by the control.

  18. Using LAPS/STMAS as a real time surface analysis tool

    NASA Astrophysics Data System (ADS)

    Moré, Jordi; Farguell, Àngel; Altava, Vicent

    2016-04-01

    A data assimilation system based on the LAPS/STMAS software is tested for a full year (2012) to provide hourly surface analyses at high resolution (3 km) in a complex terrain area centered over Catalonia. In particular, surface observations of more than 150 automatic weather stations (AWS) of the Meteorological Service of Catalonia (SMC) are combined with the operational outputs of WRF-ARW model at 3 km available at SMC. The hourly analyses obtained are verified against independent observations in order to evaluate the system as a real time tool in a small meteorological office. Additionally, an special study is carried out focusing on temperature at 2 m by means of introducing some code modifications in the LAPS/STMAS software. These tests are compared together with a simple multiregression technique exclusively based on observational data (AWS). The comparison shows that the best results are obtained for STMAS when introducing an error weight that depends on the station topography representativeness, instead of just considering a common instrumental error for all the stations. Nevertheless, the multiregression technique still provides more accurate results on temperature and reveals that additional work has to be done in order to improve the system.

  19. Friction Stir Lap Welding of Magnesium Alloy to Steel: A Preliminary Investigation

    SciTech Connect

    Jana, Saumyadeep; Hovanski, Yuri; Grant, Glenn J.

    2010-12-01

    An initial study was made to evaluate the feasibility of joining Magnesium alloy AZ31 sheet to galvanized steel sheet in lap configuration using friction stir welding (FSW). Two different automotive sheet steels were used for comparative evaluation of the dissimilar joining potential; a 0.8mm thick, electro galvanized (EG) mild steel, and a 1.5mm thick hot dipped galvanized (HDG) high-strength, low-alloy steel (HSLA). These steels were joined to 2.33mm thick AZ31B magnesium sheet. A single FSW tool design was used for both dissimilar welds, and process parameters were kept the same. Average peak load for the AZ31-1.5 mm steel weld joint in lap shear mode was found to be 6.3 ± 1.0 kN. For the AZ31-0.8 mm steel weld, joint strength was 5.1 ± 1.5 kN. Microstructural investigation indicates melting of the Zn coating at the interface and subsequent alloying with the Mg sheet resulting in formation of solidified Zn-Mg alloy layer at AZ31/steel interface.

  20. Microstructure and Properties of Lap Joint Between Aluminum Alloy and Galvanized Steel by CMT

    NASA Astrophysics Data System (ADS)

    Niu, Song; Chen, Su; Dong, Honggang; Zhao, Dongsheng; Zhang, Xiaosheng; Guo, Xin; Wang, Guoqiang

    2016-05-01

    Lap joining of 1-mm-thick Novelist AC 170 PX aluminum alloy to 1.2-mm-thick ST06 Z galvanized steel sheets for automotive applications was conducted by cold metal transfer advanced welding process with ER4043 and ER4047 filler wires. Under the optimized welding parameters with ER4043 filler wire, the tensile shear strength of joint was 189 MPa, reaching 89% of the aluminum alloy base metal. Microstructure and elemental distribution were characterized by optical metalloscope and electron probe microanalysis. The lap joints with ER4043 filler wire had smaller wetting angle and longer bonded line length with better wettability than with ER4047 filler wire during welding with same parameters. The needle-like Al-Fe-Si intermetallic compounds (IMCs) were spalled into the weld and brought negative effect to the tensile strength of joints. With increasing welding current, the needle-like IMCs grew longer and spread further into the weld, which would deteriorate the tensile shear strength.

  1. (40)Ar/(39)Ar Age of Hornblende-Bearing R Chondrite LAP 04840

    NASA Technical Reports Server (NTRS)

    Righter, K.; Cosca, M.

    2015-01-01

    Chondrites have a complex chronology due to several variables affecting and operating on chondritic parent bodies such as radiogenic heating, pressure and temperature variation with depth, aqueous alteration, and shock or impact heating. Unbrecciated chondrites can record ages from 4.56 to 4.4 Ga that represent cooling in small parent bodies. Some brecciated chondrites exhibit younger ages (much less than 4 to 4.4 Ga) that may reflect the age of brecciation, disturbance, or shock and impact events (much less than 4 Ga). A unique R chondrite was recently found in the LaPaz Icefield of Antarctica - LAP 04840. This chondrite contains approximately 15% hornblende and trace amounts of biotite, making it the first of its kind. Studies have revealed an equigranular texture, mineral equilibria yielding equilibration near 650-700 C and 250-500 bars, hornblende that is dominantly OH-bearing (very little Cl or F), and high D/H ratios. To help gain a better understanding of the origin of this unique sample, we have measured the (40)Ar/(39)Ar age (LAP 04840 split 39).

  2. Joining aluminum to titanium alloy by friction stir lap welding with cutting pin

    SciTech Connect

    Wei, Yanni; Li, Jinglong; Xiong, Jiangtao; Huang, Fu; Zhang, Fusheng; Raza, Syed Hamid

    2012-09-15

    Aluminum 1060 and titanium alloy Ti-6Al-4V plates were lap joined by friction stir welding. A cutting pin of rotary burr made of tungsten carbide was employed. The microstructures of the joining interface were observed by scanning electron microscopy. Joint strength was evaluated by a tensile shear test. During the welding process, the surface layer of the titanium plate was cut off by the pin, and intensively mixed with aluminum situated on the titanium plate. The microstructures analysis showed that a visible swirl-like mixed region existed at the interface. In this region, the Al metal, Ti metal and the mixed layer of them were all presented. The ultimate tensile shear strength of joint reached 100% of 1060Al that underwent thermal cycle provided by the shoulder. - Highlights: Black-Right-Pointing-Pointer FSW with cutting pin was successfully employed to form Al/Ti lap joint. Black-Right-Pointing-Pointer Swirl-like structures formed due to mechanical mixing were found at the interface. Black-Right-Pointing-Pointer High-strength joints fractured at Al suffered thermal cycle were produced.

  3. Lap shear strength and healing capability of self-healing adhesive containing epoxy/mercaptan microcapsules

    NASA Astrophysics Data System (ADS)

    Ghazali, Habibah; Ye, Lin; Zhang, Ming-Qiu

    2016-03-01

    The aim of this work is to develop a self-healing polymeric adhesive formulation with epoxy/mercaptan microcapsules. Epoxy/mercaptan microcapsules were dispersed into a commercialize two-part epoxy adhesive for developing self-healing epoxy adhesive. The influence of different content of microcapsules on the shear strength and healing capability of epoxy adhesive were investigated using single-lap-joints with average thickness of adhesive layer of about 180 µm. This self-healing adhesive was used in bonding of 5000 series aluminum alloys adherents after mechanical and alkaline cleaning surface treatment. The adhesion strength was measured and presented as function of microcapsules loading. The results indicated that the virgin lap shear strength was increased by about 26% with addition of 3 wt% of self-healing microcapsules. 12% to 28% recovery of the shear strength is achieved after self-healing depending on the microcapsules content. Scanning electron microscopy was used to study fracture surface of the joints. The self-healing adhesives exhibit recovery of both cohesion and adhesion properties with room temperature healing.

  4. High Voltage Breakdown, Partial Discharge and Aging in Lapped Tape Insulated Cold Dielectric Model Cables

    NASA Astrophysics Data System (ADS)

    Sauers, I.; James, D. R.; Pace, M. O.; Ellis, A. R.; Muller, A. C.

    2004-06-01

    High temperature superconducting (HTS) power cables generally follow either of two generic designs, cold dielectric and warm dielectric. In the cold dielectric design, lapped tape insulation and liquid nitrogen are used in combination to provide the electrical insulation between the conductor and the ground shield of an HTS cable. Lapped tape insulated model cables have been tested at high voltage, including AC breakdown, negative impulse breakdown, partial discharge, and long term aging under AC stress. Tapes tested include Cryoflex™ (a proprietary tape developed by Southwire) and PPLP® (a commercial semi synthetic tape). Two high voltage cryostats have been built for short and long term aging studies that permit testing of model cables under the combined conditions of high electric stress, cryogenic temperature and elevated pressures up to 15 bar. For the aging studies, a log-log plot of electric stress versus time-to-breakdown has yielded an estimate of cable lifetime. Since aging at cryogenic temperatures is not expected to have a thermal cause, dielectric wear in HTS cables reduces to partial discharge as the primary aging mechanism. Phase and amplitude resolved partial discharge data of model cables in liquid nitrogen will be presented.

  5. A fracture mechanics analysis of adhesive failure in a single lap shear joint.

    NASA Technical Reports Server (NTRS)

    Devries, K. L.; Williams, M. L.; Chang, M. D.

    1972-01-01

    Discussion of adhesive fracture of single lap shear joints in terms of a maximum stress criterion and an energy balance. The Goland and Reissner (1944) analysis is used to determine the stress distribution in the adhesive assembly, and the results obtained are introduced into an energy balance to determine the initiation of adhesive fracture. In the stress analysis the loads at the edges of the joint are first determined. This is a problem in which the deformation of the joint sheets must be taken into account and is solved by using the finite-deflection theory of cylindrically bent plates. Then the stress in the joint due to applied loads is determined. This problem is formulated as one in plane strain consisting of two rectangular sheets of equal thickness and unit width. With the aid of this stress analysis and the stresses obtained from the conditions of equilibrium the contributions to the energy change with crack length are calculated. The analysis performed is then compared with a maximum stress criterion for a lap joint.

  6. Design for size and weight reduction of lap-winding type three-phase variable inductor

    NASA Astrophysics Data System (ADS)

    Nakamura, Kenji; Honma, Koya; Ohinata, Takashi; Arimatsu, Kenji; Ichinokura, Osamu

    2015-05-01

    Variable inductors have a simple structure that consists of only magnetic core and primary dc and secondary ac windings, but can control effective inductance of the secondary ac winding by the primary dc current due to magnetic saturation effect. Hence, the variable inductors can be applied as a var compensator in electric power systems. In a previous paper, a lap-winding type three-phase variable inductor, which has the primary dc and secondary ac windings concentrically arranged on the same leg, was presented. It has a good controllability and low distortion current. This paper describes size and weight reduction of the lap-winding type three-phase variable inductor by focusing on the leg width. First, an initial design method of the leg width considering the influence of the dc-biased magnetization is presented. Next, a detailed design of the leg width for the size and weight reduction of the proposed variable inductor is described. Finally, characteristics of the size- and weight-reduced variable inductor were compared to those of the previous variable inductor. It is demonstrated that the core diameter is reduced by about 6% and the weight is decreased by about 50% in comparison with the previous variable inductor.

  7. The development of laser-plasma interaction program LAP3D on thousands of processors

    SciTech Connect

    Hu, Xiaoyan Hao, Liang; Liu, Zhanjun; Zheng, Chunyang; Li, Bin Guo, Hong

    2015-08-15

    Modeling laser-plasma interaction (LPI) processes in real-size experiments scale is recognized as a challenging task. For explorering the influence of various instabilities in LPI processes, a three-dimensional laser and plasma code (LAP3D) has been developed, which includes filamentation, stimulated Brillouin backscattering (SBS), stimulated Raman backscattering (SRS), non-local heat transport and plasmas flow computation modules. In this program, a second-order upwind scheme is applied to solve the plasma equations which are represented by an Euler fluid model. Operator splitting method is used for solving the equations of the light wave propagation, where the Fast Fourier translation (FFT) is applied to compute the diffraction operator and the coordinate translations is used to solve the acoustic wave equation. The coupled terms of the different physics processes are computed by the second-order interpolations algorithm. In order to simulate the LPI processes in massively parallel computers well, several parallel techniques are used, such as the coupled parallel algorithm of FFT and fluid numerical computation, the load balance algorithm, and the data transfer algorithm. Now the phenomena of filamentation, SBS and SRS have been studied in low-density plasma successfully with LAP3D. Scalability of the program is demonstrated with a parallel efficiency above 50% on about ten thousand of processors.

  8. Multitechnique monitoring of fatigue damage in adhesively bonded composite lap-joints

    NASA Astrophysics Data System (ADS)

    Karpenko, Oleksii; Koricho, Ermias; Khomenko, Anton; Dib, Gerges; Haq, Mahmoodul; Udpa, Lalita

    2015-03-01

    The requirement for reduced structural weight has driven the development of adhesively bonded joints. However, a major issue preventing their full acceptance is the initiation of premature failure in the form of a disbond between adherends, mainly due to fatigue, manufacturing flaws or impact damage. This work presents the integrated approach for in-situ monitoring of degradation of the adhesive bond in the GFRP composite lap-joint using ultrasonic guided waves and dynamic measurements from strategically embedded FBG sensors. Guided waves are actuated with surface mounted piezoelectric elements and mode tuning is used to provide high sensitivity to the degradation of the adhesive layer parameters. Composite lap-joints are subjected to fatigue loading, and data from piezoceramic transducers are collected at regular intervals to evaluate the progression of damage. Results demonstrate that quasi-static loading affects guided wave measurements considerably, but FBG sensors can be used to monitor the applied load levels and residual strains in the adhesive bond. The proposed technique shows promise for determining the post-damage stiffness of adhesively bonded joints.

  9. Lap Shear and Impact Testing of Ochre and Beeswax in Experimental Middle Stone Age Compound Adhesives.

    PubMed

    Kozowyk, P R B; Langejans, G H J; Poulis, J A

    2016-01-01

    The production of compound adhesives using disparate ingredients is seen as some of the best evidence of advanced cognition outside of the use of symbolism. Previous field and laboratory testing of adhesives has shown the complexities involved in creating an effective Middle Stone Age glue using Acacia gum. However, it is currently unclear how efficient different adhesive recipes are, how much specific ingredients influence their performance, and how difficult it may have been for those ingredients to be combined to maximum effect. We conducted a series of laboratory-based lap shear and impact tests, following modern adhesion testing standards, to determine the efficacy of compound adhesives, with particular regard to the ingredient ratios. We tested rosin (colophony) and gum adhesives, containing additives of beeswax and ochre in varying ratios. During both lap shear and impact tests compound rosin adhesives performed better than single component rosin adhesives, and pure acacia gum was the strongest. The large difference in performance between each base adhesive and the significant changes in performance that occur due to relatively small changes in ingredient ratios lend further support to the notion that high levels of skill and knowledge were required to consistently produce the most effective adhesives. PMID:26983080

  10. Standard services for the capture, processing, and distribution of packetized telemetry data

    NASA Technical Reports Server (NTRS)

    Stallings, William H.

    1989-01-01

    Standard functional services for the capture, processing, and distribution of packetized data are discussed with particular reference to the future implementation of packet processing systems, such as those for the Space Station Freedom. The major functions are listed under the following major categories: input processing, packet processing, and output processing. A functional block diagram of a packet data processing facility is presented, showing the distribution of the various processing functions as well as the primary data flow through the facility.

  11. Compression of echocardiographic scan line data using wavelet packet transform

    NASA Technical Reports Server (NTRS)

    Hang, X.; Greenberg, N. L.; Qin, J.; Thomas, J. D.

    2001-01-01

    An efficient compression strategy is indispensable for digital echocardiography. Previous work has suggested improved results utilizing wavelet transforms in the compression of 2D echocardiographic images. Set partitioning in hierarchical trees (SPIHT) was modified to compress echocardiographic scanline data based on the wavelet packet transform. A compression ratio of at least 94:1 resulted in preserved image quality.

  12. A CURRICULUM FOR ENGLISH, STUDENT PACKET, GRADE 12.

    ERIC Educational Resources Information Center

    Nebraska Univ., Lincoln. Curriculum Development Center.

    THE LITERATURE PROGRAM OF THE GRADE 12 STUDENT PACKET OF THE NEBRASKA ENGLISH CURRICULUM CONSISTS OF A SELECTIVE SURVEY OF ENGLISH LITERATURE FROM THE RENAISSANCE TO THE 20TH CENTURY. IT BEGINS WITH A UNIT ON SHAKESPEAREAN TRAGEDY IN WHICH STUDENTS READ REVENGE TRAGEDIES--SENECA'S "THYESTES" AND KYD'S "THE SPANISH TRAGEDY"--AS PREPARATION FOR THE…

  13. Scattering of wave packets on atoms in the Born approximation

    NASA Astrophysics Data System (ADS)

    Karlovets, D. V.; Kotkin, G. L.; Serbo, V. G.

    2015-11-01

    It has recently been demonstrated experimentally that 200 -300 keV electrons with the unusual spatial profiles can be produced and even focused to a subnanometer scale—namely, electrons carrying nonzero orbital angular momentum and also the so-called Airy beams. Since the wave functions of such electrons do not represent plane waves, the standard Born formula for scattering of them off a potential field is no longer applicable and, hence, needs modification. In the present paper, we address the generic problem of elastic scattering of a wave packet of a fast nonrelativistic particle off a potential field. We obtain simple and convenient formulas for a number of events and an effective cross section in such a scattering, which represent generalization of the Born formula for a case when finite sizes and spatial inhomogeneity of the initial packet should be taken into account. As a benchmark, we consider two simple models corresponding to scattering of a Gaussian wave packet on a Gaussian potential and on a hydrogen atom, and perform a detailed analysis of the effects brought about by the limited sizes of the incident beam and by the finite impact parameter between the potential center and the packet's axis.

  14. Energy Crisis: Libya's and Nigeria's Role. Resource Packet.

    ERIC Educational Resources Information Center

    African-American Inst., New York, NY. School Services Div.

    This resource packet contains practical suggestions and resource materials to help secondary teachers teach about Libya's and Nigeria's roles in the energy crisis. Students become acquainted with the governments and cultures of the two countries, examine their social problems, and learn how the Libyan and Nigerian governments are using money from…

  15. Teaching about the U.S. Constitution. A Resource Packet.

    ERIC Educational Resources Information Center

    Leming, Robert S.; And Others

    The 200th anniversary of the United States Constitution offers an excellent opportunity for encouraging renewed study of the principles and foundations of constitutional government. This resource packet provides a listing of current materials and resources to aid teachers in planning lesson units. The listings include: (1) professional…

  16. 41 CFR 101-39.306 - Operator's packet.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Regulations System FEDERAL PROPERTY MANAGEMENT REGULATIONS AVIATION, TRANSPORTATION, AND MOTOR VEHICLES 39-INTERAGENCY FLEET MANAGEMENT SYSTEMS 39.3-Use and Care of GSA Interagency Fleet Management System Vehicles § 101-39.306 Operator's packet. The GSA Interagency Fleet Management System (IFMS) will provide...

  17. 41 CFR 101-39.306 - Operator's packet.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Regulations System FEDERAL PROPERTY MANAGEMENT REGULATIONS AVIATION, TRANSPORTATION, AND MOTOR VEHICLES 39-INTERAGENCY FLEET MANAGEMENT SYSTEMS 39.3-Use and Care of GSA Interagency Fleet Management System Vehicles § 101-39.306 Operator's packet. The GSA Interagency Fleet Management System (IFMS) will provide...

  18. Using the Internet To Create Primary Source Teaching Packets.

    ERIC Educational Resources Information Center

    VanFossen, Phillip J.; Shiveley, James M.

    2000-01-01

    Describes strategies and guidelines for creating age- and content-appropriate primary source documents using the Internet. Discusses the value of using topic-specific primary source teaching packets, or jackdaws. Provides three Internet generated jackdaws: New Deal/FDR, Home Front during World War II, and the Gilded Age. Addresses fair use issues.…

  19. An Efficient Conflict Detection Algorithm for Packet Filters

    NASA Astrophysics Data System (ADS)

    Lee, Chun-Liang; Lin, Guan-Yu; Chen, Yaw-Chung

    Packet classification is essential for supporting advanced network services such as firewalls, quality-of-service (QoS), virtual private networks (VPN), and policy-based routing. The rules that routers use to classify packets are called packet filters. If two or more filters overlap, a conflict occurs and leads to ambiguity in packet classification. This study proposes an algorithm that can efficiently detect and resolve filter conflicts using tuple based search. The time complexity of the proposed algorithm is O(nW+s), and the space complexity is O(nW), where n is the number of filters, W is the number of bits in a header field, and s is the number of conflicts. This study uses the synthetic filter databases generated by ClassBench to evaluate the proposed algorithm. Simulation results show that the proposed algorithm can achieve better performance than existing conflict detection algorithms both in time and space, particularly for databases with large numbers of conflicts.

  20. A CURRICULUM FOR ENGLISH, STUDENT PACKET, GRADE 7.

    ERIC Educational Resources Information Center

    Nebraska Univ., Lincoln. Curriculum Development Center.

    THE SEVENTH-GRADE STUDENT PACKET, PRODUCED BY THE NEBRASKA CURRICULUM DEVELOPMENT CENTER, BEGINS WITH THE UNIT ENTITLED "THE MAKING OF STORIES" IN WHICH STUDENTS CONSIDER WRITERS' AUDIENCES AND METHODS OF COMPOSITION AND PRESENTATION. SUCH MATERIAL AS "A CHRISTMAS CAROL" AND SELECTIONS FROM "THE ODYSSEY,""BEOWULF,""HYMN TO HERMES," AND GRIMM'S…

  1. Marine and Coastal Resources. Global Issues Education Packet.

    ERIC Educational Resources Information Center

    Holm, Amy E.

    At least 70% of the Earth is covered with water. This packet provides background information on eight areas of concern regarding marine and coastal resources. Considered are: (1) "Coastal Resources"; (2) "Mangroves"; (3) "Coral Reefs"; (4) "Ocean Resources"; (5) "Aquaculture"; (6) "Pollution"; (7) "Marine Debris"; and (8) "The Global Commons."…

  2. Teen Pregnancy Prevention and Support. An Introductory Packet.

    ERIC Educational Resources Information Center

    California Univ., Los Angeles. Center for Mental Health Schools.

    This introductory packet is designed to help those with an interest in preventing teen pregnancy. It opens with "A Brief Introduction to Teen Pregnancy Prevention and Support," an essay by the Center for Mental Health in Schools of the University of California, Los Angeles, that outlines the dimensions of the problem. "A Quick Overview of Some…

  3. Hardware packet pacing using a DMA in a parallel computer

    DOEpatents

    Chen, Dong; Heidelberger, Phillip; Vranas, Pavlos

    2013-08-13

    Method and system for hardware packet pacing using a direct memory access controller in a parallel computer which, in one aspect, keeps track of a total number of bytes put on the network as a result of a remote get operation, using a hardware token counter.

  4. "Macbeth." A Play Packet To Accompany "Elementary, My Dear Shakespeare."

    ERIC Educational Resources Information Center

    Engen, Barbara; Campbell, Joy

    Intended for use by elementary school teachers as a supplement to the book, "Elementary, My Dear Shakespeare," or for use by itself to produce one Shakespeare play, this play packet contains ready-to-reproduce materials for the production of "Macbeth." Materials include: staging suggestions for scenery, props, lighting, and costumes; a short…

  5. Environmental Education Inservice Training Packet for the Intermediate Level.

    ERIC Educational Resources Information Center

    Upper Mississippi River ECO-Center, Thomson, IL.

    The inservice teacher training packet, developed with help from the environmental education program of the Upper Mississippi River ECO-Center, is designed to help intermediate-level teachers develop teaching skills which will enable them to introduce environmental or outdoor education to their students and develop those concepts, attitudes, and…

  6. Maintaining Inequality: A Background Packet on Tracking and Ability Grouping.

    ERIC Educational Resources Information Center

    National Coalition of Education Activists, Rosendale, NY.

    This document includes a selection of materials from the National Coalition of Education Activists (NCEA) on tracking and ability grouping designed to be a tool for teachers who wish to organize their school or district against tracking. The packet contains a cover letter, a response/feedback form, and reproductions of the following articles: (1)…

  7. A CURRICULUM FOR ENGLISH, TEACHER PACKET, GRADE 11.

    ERIC Educational Resources Information Center

    Nebraska Univ., Lincoln. Curriculum Development Center.

    UNITS IN THE TEACHER PACKET FOR THE 11TH-GRADE NEBRASKA ENGLISH CURRICULUM ARE ORGANIZED AROUND THREE MAJOR THEMES IN AMERICAN LITERATURE--MAN AND NATURE, MAN AND MORAL LAW, AND MAN AND SOCIETY. THE MAN AND NATURE THEME IS EXAMINED IN TWO UNITS--"INDIVIDUALISM AND IDEALISM, SPIRITUAL AUTOBIOGRAPHY" AND "THE SEARCH FOR FORM." THE FORMER UNIT, AN…

  8. Wave packet motion in harmonic potential and computer visualization

    NASA Technical Reports Server (NTRS)

    Tsuru, Hideo; Kobayashi, Takeshi

    1993-01-01

    Wave packet motions of a single electron in harmonic potentials or a magnetic field are obtained analytically. The phase of the wave function which depends on both time and space is also presented explicitly. The probability density of the electron changes its width and central position periodically. These results are visualized using computer animation techniques.

  9. Quality Enhancement of Packet Audio with Time-Scale Modification

    NASA Astrophysics Data System (ADS)

    Liu, Fang; Kuo, C.-C. Jay

    2002-12-01

    In traditional packet voice or the emerging 2.5G and 3G wireless data services, smooth and timely delivery of audio is an essential requirement in Quality of Service (QoS) provision. It has been shown in our previous work that, by adapting time-scale modification to audio signals, an adaptive play-out algorithm can be designed to minimize packet dropping at the receiver end. By stretching the audio frame duration up and down, the proposed algorithm could adapt quickly to accommodate fluctuating delays including delay spikes. In this paper, we will address the packet audio QoS with emphasis on end-to-end delay, packet loss, and delay jitter. The characteristics of delay and loss will be discussed. Adaptive playback will enhance the audio quality by adapting to the transmission delay jitter and delay spike. Coupled with Forward Error Correction (FEC) schemes, the proposed delay and loss concealment algorithm achieves less overall application loss rate without sacrificing on the average end-to-end delay. The optimal solution of such algorithms will be discussed. We also investigate the stretching-ratio transition effect on perceived audio quality by measuring the objective Perceptual Evaluation of Speech Quality (PESQ) Mean Opinion Score (MOS).

  10. Electronic-To-Optical-To-Electronic Packet-Data Conversion

    NASA Technical Reports Server (NTRS)

    Monacos, Steve

    1996-01-01

    Space-time multiplexer (STM) cell-based communication system designed to take advantage of both high throughput attainable in optical transmission links and flexibility and functionality of electronic processing, storage, and switching. Long packets segmented and transmitted optically by wavelength-division multiplexing. Performs optoelectronic and protocol conversion between electronic "store-and-forward" protocols and optical "hot-potato" protocols.

  11. SLIAG Advocacy Packet: A Guide for Community-Based Organizations.

    ERIC Educational Resources Information Center

    National Council of La Raza, Washington, DC.

    This packet of materials is designed as a basic guide for community-based organizations (CBOs) interested in tracking the use of State Legalization Impact Assistance Grants (SLIAG) funds and in advocating that they be used efficiently and effectively. The SLIAG program was created under the Immigration Reform and Control Act of 1986 (IRCA) to…

  12. Resonance-assisted decay of nondispersive wave packets.

    PubMed

    Wimberger, Sandro; Schlagheck, Peter; Eltschka, Christopher; Buchleitner, Andreas

    2006-07-28

    We present a quantitative semiclassical theory for the decay of nondispersive electronic wave packets in driven, ionizing Rydberg systems. Statistically robust quantities are extracted combining resonance-assisted tunneling with subsequent transport across chaotic phase space and a final ionization step.

  13. An integrated circuit/packet switched videoconferencing system

    SciTech Connect

    Kippenhan, H.A. Jr.; Lidinsky, W.P.; Roediger, G.A.; Watts, T.A.

    1995-11-01

    The HEP Network Resource Center (HEPNRC) at Fermilab and the Collider Detector Facility (CDF) collaboration have evolved a flexible, cost-effective, widely accessible videoconferencing system for use by high energy physics collaborations and others wishing to use videoconferencing. No current systems seemed to fully meet the needs of high energy physics collaborations. However, two classes of videoconferencing technology: circuit-switched and packet-switched, if integrated, might encompass most of HEP`s needs. It was also realized that, even with this integration, some additional functions were needed and some of the existing functions were not always wanted. HEPNRC with the help of members of the CDF collaboration set out to develop such an integrated system using as many existing subsystems and components as possible. This system is called VUPAC (Videoconferencing Using PAckets and Circuits). This paper begins with brief descriptions of the circuit-switched and packet-switched videoconferencing systems. Following this, issues and limitations of these systems are considered. Next the VUPAC system is described. Integration is accomplished primarily by a circuit/packet videoconferencing interface. Augmentation is centered in another subsystem called MSB (Multiport multisession Bridge). Finally, there is a discussion of the future work needed in the evolution of this system.

  14. Customized lifting multiwavelet packet information entropy for equipment condition identification

    NASA Astrophysics Data System (ADS)

    Chen, Jinglong; Zuo, Ming J.; Zi, Yanyang; He, Zhengjia; Yuan, Jing; Chen, Xuefeng

    2013-09-01

    Condition identification of mechanical equipment from vibration measurement data is significant to avoid economic loss caused by unscheduled breakdowns and catastrophic accidents. However, this task still faces challenges due to the complexity of equipment and the harsh environment. This paper provides a possibility for equipment condition identification by proposing a method called customized lifting multiwavelet packet information entropy. Benefiting from the properties of multi-resolution analysis and multiple wavelet basis functions, the multiwavelet method has advantages in characterizing non-stationary vibration signals. In order to realize the accurate detection and identification of the condition features, a customized lifting multiwavelet packet is constructed via a multiwavelet lifting scheme. Then the vibration signal from the mechanical equipment is processed by the customized lifting multiwavelet packet transform. The relative energy in each frequency band of the multiwavelet packet transform coefficients that equals a percentage of the whole signal energy is taken as the probability. The normalized information entropy is obtained based on the relative energy to describe the condition of a mechanical system. The proposed method is applied to the condition identification of a rolling mill and a demountable disk-drum aero-engine. The results support the feasibility of the proposed method in equipment condition identification.

  15. The Sphinx and the Pyramids at Giza. Educational Packet.

    ERIC Educational Resources Information Center

    Gagliano, Sara; Rapport, Wendy

    This packet of materials was created to accompany the exhibit "The Sphinx and the Pyramids: 100 Years of American Archaeology at Giza" at the Semitic Museum of Harvard University. The lessons and teacher's guide focus on the following: (1) "The Mystery of the Secret Tomb" where students take on the role of an archaeologist by attempting to solve a…

  16. Application of Cellular Automata to Detection of Malicious Network Packets

    ERIC Educational Resources Information Center

    Brown, Robert L.

    2014-01-01

    A problem in computer security is identification of attack signatures in network packets. An attack signature is a pattern of bits that characterizes a particular attack. Because there are many kinds of attacks, there are potentially many attack signatures. Furthermore, attackers may seek to avoid detection by altering the attack mechanism so that…

  17. Teacher Education Packet for Illinois Core Curriculum in Agriculture.

    ERIC Educational Resources Information Center

    Hemp, Paul; Pepple, Jerry

    Developed for use by teacher educators or state staff, this teaching packet provides preservice or inservice training to teachers and prospective teachers on how to use the Illinois Core Curriculum in Agriculture. (It is recommended that copies of the Illinois core materials be available to the students.) Three problem areas are included:…

  18. The recombinant proregion of transforming growth factor beta1 (latency-associated peptide) inhibits active transforming growth factor beta1 in transgenic mice.

    PubMed

    Böttinger, E P; Factor, V M; Tsang, M L; Weatherbee, J A; Kopp, J B; Qian, S W; Wakefield, L M; Roberts, A B; Thorgeirsson, S S; Sporn, M B

    1996-06-11

    All three isoforms of transforming growth factors beta (TGF-betal, TGF-beta2, and TGF-beta3) are secreted as latent complexes and activated extracellularly, leading to the release of the mature cytokines from their noncovalently associated proregions, also known as latency-associated peptides (LAPs). The LAP region of TGF-beta1 was expressed in a baculovirus expression system and purified to homogeneity. In vitro assays of growth inhibition and gene induction mediated by TGF-beta3 demonstrate that recombinant TGF-beta1 LAP is a potent inhibitor of the activities of TGF-betal, -beta2, and -beta3. Effective dosages of LAP for 50% neutralization of TGF-beta activities range from 4.7- to 80-fold molar excess depending on the TGF-beta isoform and activity examined. Using 125I-labeled LAP, we show that the intraperitoneal application route is effective for systemic administration of LAP. Comparison of concentrations of LAP in tissues shows a homogenous pattern in most organs with the exception of heart and muscle, in which levels of LAP are 4- to 8-fold lower. In transgenic mice with elevated hepatic levels of bioactive TGF-betal, treatment with recombinant LAP completely reverses suppression of the early proliferative response induced by TGF-beta1 in remnant livers after partial hepatectomy. The results suggest that recombinant LAP is a potent inhibitor of bioactive TGF-beta both in vitro and in vivo, after intraperitoneal administration. Recombinant LAP should be a useful tool for novel approaches to study and therapeutically modulate pathophysiological processes mediated by TGF-beta3.

  19. Exploring multiple degrees of freedom in Rydberg wave packets

    NASA Astrophysics Data System (ADS)

    Wen, Haidan

    2006-12-01

    Recent advances in the study of Rydberg atoms have focused on the control, manipulation and detection of Rydberg wave packets using novel external fields such as half-cycle pulses. The radial degree of freedom has been controlled and used to process information encoded in Rydberg states. However, these previous experiments make use of only a single degree of freedom, restricting the potential of other degrees of freedom for quantum computing in Rydberg atoms. In this dissertation, we explore the control and detection of other degrees of freedom in an electron wave packet, such as the angular momentum quantum number ℓ, the magnetic quantum number m and the electron spin; so that the full range of quantum numbers can participate in information processing. We first propose an interferometric control of the population of angular momentum states using two time-delayed phase-locked ultrafast laser pulses. The population of arbitrary angular momentum states can be greatly enhanced by optimizing the time delay and the relative phases between two laser pulses. We then qualitatively measure the evolution of angular momentum components in Stark wave packets by a weak half-cycle pulse (HCP). This measurement utilizes a time-delayed HCP and is proved to be effective for detecting various aspects of wave packet dynamics, particularly, the evolution of non-stationary states. The technique relies on the fact that the HCP redistributes the eigenstate populations and induced the population variation which reflects the evolution of eigenstate phases. Finally, we find that the dynamics of m-states could be highly correlated with the internal degree of freedom of the electron, the spin. We study the effect of spin-orbit coupling on the wave packet dynamics and observe the angular precession of a Rydberg wave packet. The population redistribution from p to s states is highly sensitive to the polarization of the HCP and changes with the precession of the electron orbit. We obtain the

  20. The Amphibole-Bearing Chondrite Meteorite LAP04840: Metamorphism and `Tectonics' in a Hydrous Asteroid

    NASA Astrophysics Data System (ADS)

    Treiman, A. H.; McCanta, M. C.; Essene, E. J.

    2006-12-01

    LAP04840 is an R-chondrite found in Antarctica, and is unique among meteorites in containing abundant amphibole and biotite. Its chondrules (>500 μm diam) sit in a granoblastic matrix of grains ~20 μm across. Amphibole and biotite grains are anhedral to subhedral, to ~100 μm, and concentrated in chondrules. Commonly, they fit among the olivine and opx grains in regions that would (in anhydrous chondrules) have been occupied by cpx, mesostasis, or glass. Minerals are unzoned, and have constant compositions: olivine Fo62Fa38, Opx En60Wo01, plagioclase An07Ab90, magnesio-hornblende, (Ca1.52Na0.81K0.44) (Mg3.60Fe1.27Mn0.01Ti0.04Cr0.08) (Si6.95Al1.02Fe0.03) O22 (OH1.94?F0.05Cl0.01), sodian phlogopite (low Ti, F, Cl), magnetite (Mt63Chr28Sp05Usp04) and Fe-Ni sulfides. This assemblage is consistent with amphibolite facies equilibrium. Amph-plg thermometry (Holland &Blundy, 1994) gives 675°C, which is consistent with limits of ~600LAP are dry and contain strongly metamorphosed clasts (but no melt rocks). Depending on bulk composition, heating can continue to and beyond the basalt solidus, with core formation and widespread melting and differentiation. An asteroid in the outer belt would accrete abundant ice, which would dilute ^{26}Al and sink much of its heat in melting and vaporization even cores of large asteroids (100+ km radius) would barely reach 675

  1. Lake Michigan and Lake Superior air quality: The 1994-2003 LADCO Aircraft Project (LAP)

    NASA Astrophysics Data System (ADS)

    Foley, T. A.; Betterton, E. A.; Jacko, R.; Hillery, J.

    2011-12-01

    The goal of the 1994 to 2003 LADCO Airplane Project (LAP) was to study ozone formation over Lake Michigan so that equitable regional control strategies could be devised. During the ten year LAP campaign, a total of 328 flights were flown on 81 days over Lake Michigan and its southern and western boundaries. LAP also monitored air quality over Lake Superior and other areas in the Midwestern and southern United States. From 2001 to 2003, 117 flights were conducted over Lake Superior, Isle Royale National Park, Painted Rocks National Lakeshore and the Seeney National Wildlife Refuge in Michigan. 63 flights were conducted over St. Louis and 58 flights over the Dolly Sods Wilderness Area in West Virginia. We are looking for collaborators to help us analyze this vast data archive. Our first paper (Atmospheric Environment 45 (2011) 3192-3202) documented the project and presented results of our ozone analysis. Our results support the hypothesis of Dye et al. (1995), who found that the atmosphere over Lake Michigan is stable in the summer due to the air water temperature difference, which creates an efficient reaction chamber for ozone formation. They also hypothesized that the southwest winds characteristic of ozone-conducive conditions transport ozone further north over the lake before it crosses the shoreline onto land. We found that below 200 m above the lake, ozone formation is VOC-limited in the morning and becomes NOx limited in the afternoon. Above 200 m, ozone formation is NOx-limited throughout the day. The onshore NOx and VOC diurnal cycles peak during the early morning rush hour and are clearly linked to traffic patterns. Over the lake, VOC and NOy concentrations peak during the mid-morning rather than the early morning, supporting the hypothesis that the land breeze transports VOC and NOy over the lake. The diurnal NOx pattern over Lake Michigan is less clearly defined than the VOC pattern possibly as a result of emissions from five coal-burning power plants

  2. The calculation of equalizer currents in a 4.1 MW lap wound DC machine using finite element analysis

    SciTech Connect

    Pagel, A.; Meyer, A.S.; Landy, C.F.

    1995-12-31

    The design of equalizer windings for large lap wound d.c. machines is generally of an empirical nature. This paper presents an analytical technique, using finite element analysis, for the calculation of equalizer currents in lap windings. Each path in a simplex lap winding is influenced by a different pair of poles. It is practically impossible to make the fluxes of all poles identical in large d.c. machines. The result of uneven pole strength is that the voltages induced in the parallel paths are unequal. Since the paths are in parallel, circulating currents flow in the winding; when the machine is loaded the tendency will be to overload certain of the brushes. To mitigate this effect, permanent equalizer connections are usually made to the back of the winding to join points whose e.m.f should at every instant be the same. The circulating currents then superimpose a partially corrected magnetic field. Since equalizer currents cannot be easily measured during operation, this investigation was undertaken to see how finite element analysis could be used to determine the equalizer current sensitivity to changes in the structure. The analytical technique was used to determine the equalizer currents in a large lap wound d.c. generator. The machine modeled has been rebuilt after a major breakdown when problems occurred with equalizer windings burning out.

  3. An Unexpected Duo: Rubredoxin Binds Nine TPR Motifs to Form LapB, an Essential Regulator of Lipopolysaccharide Synthesis.

    PubMed

    Prince, Chelsy; Jia, Zongchao

    2015-08-01

    Lipopolysaccharide (LPS) synthesis and export are essential pathways for bacterial growth, proliferation, and virulence. The essential protein LapB from Escherichia coli has recently been identified as a regulator of LPS synthesis. We have determined the crystal structure of LapB (without the N-terminal transmembrane helix) at 2 Å resolution using zinc single-wavelength anomalous diffraction phasing derived from a single bound zinc atom. This structure demonstrates the presence of nine tetratricopeptide repeats (TPR) motifs, including two TPR folds that were not predicted from sequence, and a rubredoxin-type metal binding domain. The rubredoxin domain is bound intimately to the TPR motifs, which has not been previously observed or predicted. Mutations in the rubredoxin/TPR interface inhibit in vivo cell growth, and in vitro studies indicate that these modifications cause local displacement of rubredoxin from its binding site without changing the secondary structure of LapB. LapB is the first reported structure to contain both a rubredoxin domain and TPR motifs.

  4. Design and analysis on the kinematics of the lap-polisher for optical fiber end face based on tribological theory

    NASA Astrophysics Data System (ADS)

    Lu, Yu-Shan; Wang, Jun; Shu, Qi-Lin; Sun, Jun; Zheng, Xiao-Jiao

    2010-10-01

    In order to obtain the effects of the kinematical state to the profile precision of the fiber optic end surface in the process of lapping and polishing, a kinematical equation of the lap- polisher with the slider-crank movement is developed, and based on these equations and the tribological model of CMP, the dimensionless distribution of the material removal volume (DDMRV) and the trajectory of abrasive grains cutting on the lap-polisher are numerically simulated with the way of stochastic abrasive grains, then the effects of the parameters of the lap-polisher on the uniformity of the DDMRV and the trajectory on the fiber optical end surface are discussed, and the results are that the DDMRV and the trajectory of abrasive grains have rather better value when the crank length E is chosen in a advisable parameter region and the rotational speed n1 of the crank is increased and the rotation speed n0 of the guide plate is decreased.

  5. The Transfer Achievement Program (TAP): Information Packet.

    ERIC Educational Resources Information Center

    Segura, Armando; Noseworthy, Victoria

    Santa Barbara City College (California) created the Transfer Achievement Program (TAP) to deliver an integrated and cohesive set of services to underrepresented students to help increase their transfer rate to four-year institutions. TAP provides students with a developmental map of transfer-related activities through the use of the Transfer Task…

  6. Investigation into the formation of charge packets in polyethylene: Experiment and simulation

    NASA Astrophysics Data System (ADS)

    Zhao, J.; Chen, G.; Lewin, P. L.

    2012-08-01

    The phenomenon of charge packet has been reported in polymeric insulation materials under the application of dc electric fields in recent decades. It is noted that such charge packets could lead to substantial modification of local electric stress, which increases the possibility of failure of insulating materials. The physics of charge packets has not yet been revealed clearly. In this paper, the dynamics of positive charge packets in polyethylene is observed using the pulsed electro-acoustic technique. Negative differential mobility of positive charge carrier is found, which is believed to be crucial to the formation of charge packets. This negative differential mobility is introduced into a bipolar charge transport model to simulate the packet-like space charge in polymers. Simulation results show that not only the negative differential mobility but also weaker trapping characteristic are required to generate a positive charge packet in polyethylene under dc stress.

  7. A two-dimensional stress analysis of single lap joints subjected to external bending moments

    SciTech Connect

    Sawa, Toshiyuki; Nakano, Katsuyuki; Toratani, Hiroshi

    1995-11-01

    The stress distribution of single lap adhesive joints subjected to external bending moments are analyzed as a three-body contact problem by using a two-dimensional theory of elasticity. In the analysis, two similar adherends and an adhesive are replaced by finite strips, respectively. In the numerical calculations, the effects of the ratio of Young;s modulus of adherends to that of adhesive and the adhesive thickness on the stress distribution at the interface are examined. As the results, it is seen that the stress singularity causes at the edges of the interfaces and the peel stress at the edges of the interface increases with a decrease of Young`s modulus of the adherends. In addition, photoelastic experiments are carried out. A fairly good agreement is seen between the analytical and the experimental results.

  8. Adhesive-bonded double-lap joints. [analytical solutions for static load carrying capacity

    NASA Technical Reports Server (NTRS)

    Hart-Smith, L. J.

    1973-01-01

    Explicit analytical solutions are derived for the static load carrying capacity of double-lap adhesive-bonded joints. The analyses extend the elastic solution Volkersen and cover adhesive plasticity, adherend stiffness imbalance and thermal mismatch between the adherends. Both elastic-plastic and bi-elastic adhesive representations lead to the explicit result that the influence of the adhesive on the maximum potential bond strength is defined uniquely by the strain energy in shear per unit area of bond. Failures induced by peel stresses at the ends of the joint are examined. This failure mode is particularly important for composite adherends. The explicit solutions are sufficiently simple to be used for design purposes

  9. Stress analysis of the cracked lap shear specimens: An ASTM round robin

    NASA Technical Reports Server (NTRS)

    Johnson, W. S.

    1986-01-01

    This ASTM Round Robin was conducted to evaluate the state of the art in stress analysis of adhesively bonded joint specimens. Specifically, the participants were asked to calculate the strain-energy-release rate for two different geometry cracked lap shear (CLS) specimens at four different debond lengths. The various analytical techniques consisted of 2- and 3-dimensional finite element analysis, beam theory, plate theory, and a combination of beam theory and finite element analysis. The results were examined in terms of the total strain-energy-release rate and the mode I to mode II ratio as a function of debond length for each specimen geometry. These results basically clustered into two groups: geometric linear or geometric nonlinear analysis. The geometric nonlinear analysis is required to properly analyze the CLS specimens. The 3-D finite element analysis gave indications of edge closure plus some mode III loading. Each participant described his analytical technique and results. Nine laboratories participated.

  10. Stress analysis of the cracked-lap-shear specimen - An ASTM round-robin

    NASA Technical Reports Server (NTRS)

    Johnson, W. S.

    1987-01-01

    This ASTM Round Robin was conducted to evaluate the state of the art in stress analysis of adhesively bonded joint specimens. Specifically, the participants were asked to calculate the strain-energy-release rate for two different geometry cracked lap shear (CLS) specimens at four different debond lengths. The various analytical techniques consisted of 2- and 3-dimensional finite element analysis, beam theory, plate theory, and a combination of beam theory and finite element analysis. The results were examined in terms of the total strain-energy-release rate and the mode I to mode II ratio as a function of debond length for each specimen geometry. These results basically clustered into two groups: geometric linear or geometric nonlinear analysis. The geometric nonlinear analysis is required to properly analyze the CLS specimens. The 3-D finite element analysis gave indications of edge closure plus some mode III loading. Each participant described his analytical technique and results. Nine laboratories participated.

  11. Isolated injury of the superior mesenteric artery caused by a lap belt in a child.

    PubMed

    La Greca, Gaetano; Castello, Giorgio; Barbagallo, Francesco; Grasso, Emanuele; Latteri, Saverio; Scala, Vincenzo; Russello, Domenico

    2006-10-01

    Isolated vascular injuries are rare in cases of blunt abdominal trauma, and superior mesenteric artery injury is extremely rare but potentially lethal. The incidence of this kind of life-threatening injury has increased in recent years. The diagnosis of these isolated injuries is difficult, and its delay is associated with a higher morbidity and mortality. The authors report on the case of a child with an isolated injury of the superior mesenteric artery caused by a lap belt, during a motor-vehicle crash which was successfully managed. Correct use of all types of restraints is to be recommended. The diagnosis of this rare intraabdominal vascular injury is possible especially when the major signs are evident, but an awareness of this rare possibility is essential for the outcome.

  12. Airbag mediated death of a two-year-old child wearing a shoulder/lap belt.

    PubMed

    Cooper, J T; Balding, L E; Jordan, F B

    1998-09-01

    Airbag injuries have resulted in the deaths of several infants and small children, and such deaths are generally associated with rearward-facing infant seats or unrestrained children in front passenger seats of cars equipped with airbags. An airbag can also cause death in a small child wearing a shoulder/lap belt, however, as this case report illustrates. A two-year-old female was involved in a low-speed collision while riding in the front passenger seat of a dual-airbag-equipped automobile. Secondary impact with the airbag caused catastrophic occipitoatlantoaxial disarticulation with traumatic spinal cord separation, thermal injury and abrasions of the right forearm and distinctive patterned abrasions of the face. The possibility of airbag injury should be considered in all low-speed traffic fatalities, and the confirmatory injuries sought at postmortem examination.

  13. Abrasion and deformed layer formation of manganese-zinc ferrite in sliding contact with lapping tapes

    NASA Technical Reports Server (NTRS)

    Miyoshi, K.; Buckley, D. H.; Tanaka, K.

    1986-01-01

    Wear experiments were conducted using replication electron microscopy and reflection electron diffraction to study abrasion and the deformed layers produced in single-crystal Mn-Zn ferrite simulated heads during contact with lapping tapes. The crystaline state of the head is changed drastically during the abrasion process. Crystalline states ranging from nearly amorphous to highly textured polycrystalline can be produced on the wear surface of a single-crystal Mn-Zn ferrite head. The total thickness of the deformed layer was approximately 0.8 microns. This thickness increased as the load and abrasive grit size increased. The anisotropic wear of the ferrite was found to be inversely proportional to the hardness of the wear surface. The wear was lower in the order 211 111 10 0110. The wear of the ferrite increased markedly with an increase in sliding velocity and abrasive grit size.

  14. SRB/SLEEC (Solid Rocket Booster/Shingle Lap Extendible Exit Cone) feasibility study, volume 1

    NASA Technical Reports Server (NTRS)

    Baker, William H., Jr.

    1986-01-01

    A preliminary design and analysis was completed for a SLEEC (Shingle Lap Extendible Exit Cone) which could be incorporated on the Space Transportation System (STS) Solid Rocket Booster (SRB). Studies were completed which predicted weights and performance increases and development plans were prepared for the full-scale bench and static test of SLEEC. In conjunction with the design studies, a series of supporting analyses were performed to assure the validity and feasibility of performance, fabrication, cost, and reliability for the selected design. The feasibility and required amounts of bench, static firing, and flight tests considered necessary for the successful incorporation of SLEEC on the Shuttle SRBs were determined. Preliminary plans were completed which define both a follow on study effort and a development program.

  15. FRACTURE MECHANICS APPROACH TO ESTIMATE FATIGUE LIVES OF WELDED LAP-SHEAR SPECIMENS

    SciTech Connect

    Lam, P.; Michigan, J.

    2014-04-25

    A full range of stress intensity factor solutions for a kinked crack is developed as a function of weld width and the sheet thickness. When used with the associated main crack solutions (global stress intensity factors) in terms of the applied load and specimen geometry, the fatigue lives can be estimated for the laser-welded lap-shear specimens. The estimations are in good agreement with the experimental data. A classical solution for an infinitesimal kink is also employed in the approach. However, the life predictions tend to overestimate the actual fatigue lives. The traditional life estimations with the structural stress along with the experimental stress-fatigue life data (S-N curve) are also provided. In this case, the estimations only agree with the experimental data under higher load conditions.

  16. A scan-angle correction for thermal infrared multispectral data using side lapping images

    USGS Publications Warehouse

    Watson, K.

    1996-01-01

    Thermal infrared multispectral scanner (TIMS) images, acquired with side lapping flight lines, provide dual angle observations of the same area on the ground and can thus be used to estimate variations in the atmospheric transmission with scan angle. The method was tested using TIMS aircraft data for six flight lines with about 30% sidelap for an area within Joshua Tree National Park, California. Generally the results correspond to predictions for the transmission scan-angle coefficient based on a standard atmospheric model although some differences were observed at the longer wavelength channels. A change was detected for the last pair of lines that may indicate either spatial or temporal atmospheric variation. The results demonstrate that the method provides information for correcting regional survey data (requiring multiple adjacent flight lines) that can be important in detecting subtle changes in lithology.

  17. Analysis of a double shear lap joint with interference fit pin

    SciTech Connect

    Sundarraj, N.; Dattaguru, B.; Ramamurthy, T.S.

    1995-04-01

    This paper presents the study of stress distribution in a double-shear lap joint with interference fit pin subjected to inplane plate loads using FELJNT, a finite element software developed for this special purpose. FELJNT accounts for the effects of clamping and flexure of the bolt without having to adopt a laborious three-dimensional analysis. It carries out stress analysis in an axisymmetric region around the pin under non-axisymmetric loading. It uses an iterative method of contact stress analysis and a dummy element concept with frontal solver for finite element solution. This paper discusses the load for initiation of separation, through-the-thickness stress distribution, and qualitatively the beneficial effects of interference on fatigue life of the joint. The paper concludes with comparison of FELJNT results with those of JACKAL, a three-dimensional finite element analysis software for joints. 13 refs.

  18. New concepts for strength enhancement of co-cured composite single lap joints

    NASA Astrophysics Data System (ADS)

    Coates, Cameron Wayne

    2001-10-01

    Often the benefits of utilizing composites are diminished by the poor performance of their joint designs. This research examines designs that seek to improve the performance of composite co-cured single lap joints under static and fatigue loading, with only minor alteration to the geometry or lay-up of a base design. The minor alteration criterion was chosen in order to reduce the cost of implementing these designs in replacing existing joints or altering existing manufacturing methods. The approach consisted of two phases, denoted Phase I and II. Phase I consisted of monotonic tests for all the proposed designs as well as Finite Element Analysis of the design showing the most improvement. The objective of Phase I was to determine whether the designs would improve monotonic strength at the joint interface and identify the most effective designs. The designs tested during Phase I may be categorized as Single Nested Overlap, Half Slice, Full Slice and Transverse Layer. The preliminary tests consisted of single lap joint composites with altered and unaltered interfaces tested under uniform extension. The configurations examined include a quasi-isotropic lay-up and a unidirectional lay-up, however the designs are applicable to any lay-up. A comparison of ultimate strengths indicated that these designs offered improvement in strength. During testing, acoustic emission equipment was used to monitor damage progression as well as detect damage initiation and accumulation. The most consistent and practical design improvements were determined to be the Single Nested Overlap and Transverse Layer configurations. A Finite Element Analysis (FEA) of the Reference joint and the Single Nested Overlap joint was performed. FE predictions of the effectiveness of the nested overlap design support the test data through a reduction in shear stress and a reversal of peel stresses.

  19. Thin plate gap bridging study for Nd:YAG pulsed laser lap welds.

    SciTech Connect

    Roach, Robert Allen; Fuerschbach, Phillip William; Bernal, John E.; Norris, Jerome T.

    2006-01-01

    In an on going study of gap bridging for thin plate Nd:YAG laser lap welds, empirical data, high speed imaging, and computer modeling were utilized to better understand surface physics attributed to the formation and solidification of a weld pool. Experimental data indicates better gap bridging can be achieved through optimized laser parameters such as pulse length, duration, and energy. Long pulse durations at low energies generating low peak powers were found to create the highest percent of gap bridging ability. At constant peak power, gap-bridging ability was further improved by using a smaller spot diameter resulting in higher irradiances. Hence, welding in focus is preferable for bridging gaps. Gas shielding was also found to greatly impact gap-bridging ability. Gapped lap welds that could not be bridged with UHP Argon gas shielding, were easily bridged when left unshielded and exposed to only air. Incident weld angle and joint offset were also investigated for their ability to improve gap bridging. Optical filters and brightlight surface illumination enabled high-speed imaging to capture the fluid dynamics of a forming and solidifying weld pool. The effects of various laser parameters and the weld pool's interaction with the laser beam could also be observed utilizing the high-speed imaging. The work described is used to develop and validate a computer model with improved weld pool physics. Finite element models have been used to derive insight into the physics of gap bridging. The dynamics of the fluid motion within the weld pool in conjunction with the free surface physics have been the primary focus of the modeling efforts. Surface tension has been found to be a more significant factor in determining final weld pool shape than expected.

  20. Mutation in TOR1AIP1 encoding LAP1B in a form of muscular dystrophy: a novel gene related to nuclear envelopathies.

    PubMed

    Kayman-Kurekci, Gulsum; Talim, Beril; Korkusuz, Petek; Sayar, Nilufer; Sarioglu, Turkan; Oncel, Ibrahim; Sharafi, Parisa; Gundesli, Hulya; Balci-Hayta, Burcu; Purali, Nuhan; Serdaroglu-Oflazer, Piraye; Topaloglu, Haluk; Dincer, Pervin

    2014-07-01

    We performed genome-wide homozygosity mapping and mapped a novel myopathic phenotype to chromosomal region 1q25 in a consanguineous family with three affected individuals manifesting proximal and distal weakness and atrophy, rigid spine and contractures of the proximal and distal interphalangeal hand joints. Additionally, cardiomyopathy and respiratory involvement were noted. DNA sequencing of torsinA-interacting protein 1 (TOR1AIP1) gene encoding lamina-associated polypeptide 1B (LAP1B), showed a homozygous c.186delG mutation that causes a frameshift resulting in a premature stop codon (p.E62fsTer25). We observed that expression of LAP1B was absent in the patient skeletal muscle fibres. Ultrastructural examination showed intact sarcomeric organization but alterations of the nuclear envelope including nuclear fragmentation, chromatin bleb formation and naked chromatin. LAP1B is a type-2 integral membrane protein localized in the inner nuclear membrane that binds to both A- and B-type lamins, and is involved in the regulation of torsinA ATPase. Interestingly, luminal domain-like LAP1 (LULL1)-an endoplasmic reticulum-localized partner of torsinA-was overexpressed in the patient's muscle in the absence of LAP1B. Therefore, the findings suggest that LAP1 and LULL1 might have a compensatory effect on each other. This study expands the spectrum of genes associated with nuclear envelopathies and highlights the critical function for LAP1B in striated muscle.

  1. Mutation in TOR1AIP1 encoding LAP1B in a form of muscular dystrophy: a novel gene related to nuclear envelopathies.

    PubMed

    Kayman-Kurekci, Gulsum; Talim, Beril; Korkusuz, Petek; Sayar, Nilufer; Sarioglu, Turkan; Oncel, Ibrahim; Sharafi, Parisa; Gundesli, Hulya; Balci-Hayta, Burcu; Purali, Nuhan; Serdaroglu-Oflazer, Piraye; Topaloglu, Haluk; Dincer, Pervin

    2014-07-01

    We performed genome-wide homozygosity mapping and mapped a novel myopathic phenotype to chromosomal region 1q25 in a consanguineous family with three affected individuals manifesting proximal and distal weakness and atrophy, rigid spine and contractures of the proximal and distal interphalangeal hand joints. Additionally, cardiomyopathy and respiratory involvement were noted. DNA sequencing of torsinA-interacting protein 1 (TOR1AIP1) gene encoding lamina-associated polypeptide 1B (LAP1B), showed a homozygous c.186delG mutation that causes a frameshift resulting in a premature stop codon (p.E62fsTer25). We observed that expression of LAP1B was absent in the patient skeletal muscle fibres. Ultrastructural examination showed intact sarcomeric organization but alterations of the nuclear envelope including nuclear fragmentation, chromatin bleb formation and naked chromatin. LAP1B is a type-2 integral membrane protein localized in the inner nuclear membrane that binds to both A- and B-type lamins, and is involved in the regulation of torsinA ATPase. Interestingly, luminal domain-like LAP1 (LULL1)-an endoplasmic reticulum-localized partner of torsinA-was overexpressed in the patient's muscle in the absence of LAP1B. Therefore, the findings suggest that LAP1 and LULL1 might have a compensatory effect on each other. This study expands the spectrum of genes associated with nuclear envelopathies and highlights the critical function for LAP1B in striated muscle. PMID:24856141

  2. Second Harmonic Generation of Nanoscale Phonon Wave Packets

    NASA Astrophysics Data System (ADS)

    Bojahr, A.; Gohlke, M.; Leitenberger, W.; Pudell, J.; Reinhardt, M.; von Reppert, A.; Roessle, M.; Sander, M.; Gaal, P.; Bargheer, M.

    2015-11-01

    Phonons are often regarded as delocalized quasiparticles with certain energy and momentum. The anharmonic interaction of phonons determines macroscopic properties of the solid, such as thermal expansion or thermal conductivity, and a detailed understanding becomes increasingly important for functional nanostructures. Although phonon-phonon scattering processes depicted in simple wave-vector diagrams are the basis of theories describing these macroscopic phenomena, experiments directly accessing these coupling channels are scarce. We synthesize monochromatic acoustic phonon wave packets with only a few cycles to introduce nonlinear phononics as the acoustic counterpart to nonlinear optics. Control of the wave vector, bandwidth, and consequently spatial extent of the phonon wave packets allows us to observe nonlinear phonon interaction, in particular, second harmonic generation, in real time by wave-vector-sensitive Brillouin scattering with x-rays and optical photons.

  3. Wave packet dynamics in the optimal superadiabatic approximation

    NASA Astrophysics Data System (ADS)

    Betz, V.; Goddard, B. D.; Manthe, U.

    2016-06-01

    We explain the concept of superadiabatic representations and show how in the context of electronically non-adiabatic transitions they lead to an explicit formula that can be used to predict transitions at avoided crossings. Based on this formula, we present a simple method for computing wave packet dynamics across avoided crossings. Only knowledge of the adiabatic potential energy surfaces near the avoided crossing is required for the computation. In particular, this means that no diabatization procedure is necessary, the adiabatic electronic energies can be computed on the fly, and they only need to be computed to higher accuracy when an avoided crossing is detected. We test the quality of our method on the paradigmatic example of photo-dissociation of NaI, finding very good agreement with results of exact wave packet calculations.

  4. Probing surface states with many-body wave packet scattering

    NASA Astrophysics Data System (ADS)

    Damon, F.; Georgeot, B.; Guéry-Odelin, D.

    2016-07-01

    The scattering of 1D matter wave bright solitons on attractive potentials enables one to populate bound states, a feature impossible with noninteracting wave packets. Compared to noninteracting states, the populated states are renormalized by the attractive interactions between atoms and keep the same topology. This renormalization can even transform a virtual state into a bound state. By switching off adiabatically the interactions, the trapped wave packets converge towards the true noninteracting bound states. Our numerical studies show how such scattering experiments can reveal and characterize the surface states of a periodic structure whose translational invariance has been broken. We provide evidence that the corresponding 3D regime should be accessible with current techniques.

  5. Exciton-polariton localized wave packets in a microcavity

    NASA Astrophysics Data System (ADS)

    Voronych, Oksana; Buraczewski, Adam; Matuszewski, MichałÂ; Stobińska, Magdalena

    2016-06-01

    We investigate the possibility of creating X waves, or localized wave packets, in resonantly excited exciton-polariton superfluids. We demonstrate the existence of X-wave traveling solutions in the coupled exciton-photon system past the inflection point, where the effective mass of lower polaritons is negative in the direction perpendicular to the wave vector of the pumping beam. Contrary to the case of bright solitons, X waves do not require nonlinearity for sustaining their shape. Nevertheless, we show that nonlinearity is important for their dynamics, as it allows for their spontaneous formation from an initial Gaussian wave packet. Unique properties of exciton-polaritons may lead to applications of their X waves in long-distance signal propagation inside novel integrated optoelectronic circuits based on excitons.

  6. Very low bit rate voice for packetized mobile applications

    SciTech Connect

    Knittle, C.D.; Malone, K.T.

    1991-01-01

    Transmitting digital voice via packetized mobile communications systems that employ relatively short packet lengths and narrow bandwidths often necessitates very low bit rate coding of the voice data. Sandia National Laboratories is currently developing an efficient voice coding system operating at 800 bits per second (bps). The coding scheme is a modified version of the 2400 bps NSA LPC-10e standard. The most significant modification to the LPC-10e scheme is the vector quantization of the line spectrum frequencies associated with the synthesis filters. An outline of a hardware implementation for the 800 bps coder is presented. The speech quality of the coder is generally good, although speaker recognition is not possible. Further research is being conducted to reduce the memory requirements and complexity of the vector quantizer, and to increase the quality of the reconstructed speech. 4 refs., 2 figs., 3 tabs.

  7. Very low bit rate voice for packetized mobile applications

    SciTech Connect

    Knittle, C.D.; Malone, K.T. )

    1991-01-01

    This paper reports that transmitting digital voice via packetized mobile communications systems that employ relatively short packet lengths and narrow bandwidths often necessitates very low bit rate coding of the voice data. Sandia National Laboratories is currently developing an efficient voice coding system operating at 800 bits per second (bps). The coding scheme is a modified version of the 2400 bps NSA LPC-10e standard. The most significant modification to the LPC-10e scheme is the vector quantization of the line spectrum frequencies associated with the synthesis filters. An outline of a hardware implementation for the 800 bps coder is presented. The speech quality of the coder is generally good, although speaker recognition is not possible. Further research is being conducted to reduce the memory requirements and complexity of the vector quantizer, and to increase the quality of the reconstructed speech. This work may be of use dealing with nuclear materials.

  8. Wave packet dynamics in the optimal superadiabatic approximation.

    PubMed

    Betz, V; Goddard, B D; Manthe, U

    2016-06-14

    We explain the concept of superadiabatic representations and show how in the context of electronically non-adiabatic transitions they lead to an explicit formula that can be used to predict transitions at avoided crossings. Based on this formula, we present a simple method for computing wave packet dynamics across avoided crossings. Only knowledge of the adiabatic potential energy surfaces near the avoided crossing is required for the computation. In particular, this means that no diabatization procedure is necessary, the adiabatic electronic energies can be computed on the fly, and they only need to be computed to higher accuracy when an avoided crossing is detected. We test the quality of our method on the paradigmatic example of photo-dissociation of NaI, finding very good agreement with results of exact wave packet calculations. PMID:27305998

  9. Stochastic acceleration of ions driven by Pc1 wave packets

    SciTech Connect

    Khazanov, G. V. Sibeck, D. G.; Tel'nikhin, A. A.; Kronberg, T. K.

    2015-07-15

    The stochastic motion of protons and He{sup +} ions driven by Pc1 wave packets is studied in the context of resonant particle heating. Resonant ion cyclotron heating typically occurs when wave powers exceed 10{sup −4} nT{sup 2}/Hz. Gyroresonance breaks the first adiabatic invariant and energizes keV ions. Cherenkov resonances with the electrostatic component of wave packets can also accelerate ions. The main effect of this interaction is to accelerate thermal protons to the local Alfven speed. The dependencies of observable quantities on the wave power and plasma parameters are determined, and estimates for the heating extent and rate of particle heating in these wave-particle interactions are shown to be in reasonable agreement with known empirical data.

  10. Future directions in packet radio architectures and protocols

    NASA Astrophysics Data System (ADS)

    Shacham, Nachum; Westcott, Jil

    1987-01-01

    The technology of packet switching over multihop, multiple-access channels has evolved to the point at which its protocols can now support internetwork operation of medium-size networks whose nodes possess some degree of mobility. As regards the needs and challenges of the future operating environment, it is clear that these can be met only by enhancing the packet radio architecture and its protocols. Several enhancements that allow the organization of large, dynamic networks that can operate over multiple channels, adapt to varying conditions, and possess self-monitoring and self-control capabilities are discussed. As these areas are examined, the attendant issues and tradeoffs are discussed; in addition, some protocols and information regarding their performance are presented.

  11. Two-dimensional attosecond electron wave-packet interferometry.

    PubMed

    Xie, Xinhua

    2015-05-01

    We propose a two-dimensional interferometry based on the electron wave-packet interference by using a cycle-shaped orthogonally polarized two-color laser field. With such a method, the subcycle and intercycle interferences can be disentangled into different directions in the measured photoelectron momentum spectra. The Coulomb influence can be minimized and the overlapping of interference fringes with the complicated low-energy structures can be avoided as well. The contributions of the excitation effect and the long-range Coulomb potential can be traced in the Fourier domain of the photoelectron distribution. Because of these advantages, precise information on valence electron dynamics of atoms or molecules with attosecond temporal resolution and additional spatial information with angstrom resolution can be obtained with the two-dimensional electron wave-packet interferometry.

  12. The Interference of the Dynamically Squeezed Vibrational Wave Packets

    NASA Technical Reports Server (NTRS)

    Vinogradov, An. V.; Janszky, J.; Kobayashi, T.

    1996-01-01

    An electronic excitation of a molecule by a sequence of two femtosecond phase-locked laser pulses is considered. In this case the interference between the vibrational wave packets induced by each of the subpulses within a single molecule takes place. It is shown that due to the dynamical squeezing effect of a molecular vibrational state the interference of the vibrational wave packets allows one to measure the duration of a femtosecond laser pulse. This can be achieved experimentally by measuring the dependence of the integral fluorescence of the excited molecule on the delay time between the subpulses. The interference can lead to a sharp peak (or to a down-fall) in that dependence, the width of which is equal to the duration of the laser pulse. It is shown that finite temperature of the medium is favorable for such an experiment.

  13. Two-Dimensional Attosecond Electron Wave-Packet Interferometry

    NASA Astrophysics Data System (ADS)

    Xie, Xinhua

    2015-05-01

    We propose a two-dimensional interferometry based on the electron wave-packet interference by using a cycle-shaped orthogonally polarized two-color laser field. With such a method, the subcycle and intercycle interferences can be disentangled into different directions in the measured photoelectron momentum spectra. The Coulomb influence can be minimized and the overlapping of interference fringes with the complicated low-energy structures can be avoided as well. The contributions of the excitation effect and the long-range Coulomb potential can be traced in the Fourier domain of the photoelectron distribution. Because of these advantages, precise information on valence electron dynamics of atoms or molecules with attosecond temporal resolution and additional spatial information with angstrom resolution can be obtained with the two-dimensional electron wave-packet interferometry.

  14. Formation of wave packets in electron diffraction on crystals

    NASA Astrophysics Data System (ADS)

    Lanning, Robert; Bahrim, Cristian

    2012-02-01

    Measurements of electron diffraction typically reveal the atomic structure of crystals and allow finding the length of chemical bonds. The effective electronic charge of each atom in the crystal acts upon the incident electron beam as a netting of narrow pinholes, and Fourier transforms the unique deBroglie wavelength of the projectile electron accelerated at fixed voltage into a wave packet. Using the uncertainty principle one can understand the mechanism that makes an incident electron to become a wave packet travelling inside the crystal at a group velocity identical with the initial speed of the projectile electron. Furthermore, the Pauli Exclusion Principle allows us to understand the fast passage of the projectile electron through the crystal and also, it allows the evaluation of the characteristic time for electron transmission. The project was sponsored by the STAIRSTEP program under the NSF-DUE grant# 0757057.

  15. IP- -: A Reduced Internet Protocol for Optical Packet Networking

    NASA Astrophysics Data System (ADS)

    Ohta, Masataka; Fujikawa, Kenji

    IP- - is proposed as an Internet Protocol suitable for optical packet networking. As optical routers require much faster control than electric ones and lack of optical buffers other than those by fiber delay lines requires fixed time control, Internet Protocols must be at least as simple as IPv4 and much simpler than IPv6. IP- - also addresses issues of IP address space exhaustion and IP routing table explosion.

  16. Ground equipment for the support of packet telemetry and telecommand

    NASA Technical Reports Server (NTRS)

    Hell, Wolfgang

    1994-01-01

    This paper describes ground equipment for packet telemetry and telecommand which has been recently developed by industry for the European Space Agency. The architectural concept for this type of equipment is outlined and the actual implementation is presented. Focus is put on issues related to cross support and telescience as far as they affect the design of the interfaces to the users of the services provided by the equipment and to the management entities in charge of equipment control and monitoring.

  17. Spin-orbit states of neutron wave packets

    NASA Astrophysics Data System (ADS)

    Nsofini, Joachim; Sarenac, Dusan; Wood, Christopher J.; Cory, David G.; Arif, Muhammad; Clark, Charles W.; Huber, Michael G.; Pushin, Dmitry A.

    2016-07-01

    We propose a method to prepare an entangled spin-orbit state between the spin and the orbital angular momenta of a neutron wave packet. This spin-orbit state is created by passing neutrons through the center of a quadrupole magnetic field, which provides a coupling between the spin and orbital degrees of freedom. A Ramsey-fringe-type measurement is suggested as a means of verifying the spin-orbit correlations.

  18. Lossless Compression of Data into Fixed-Length Packets

    NASA Technical Reports Server (NTRS)

    Kiely, Aaron B.; Klimesh, Matthew A.

    2009-01-01

    A computer program effects lossless compression of data samples from a one-dimensional source into fixed-length data packets. The software makes use of adaptive prediction: it exploits the data structure in such a way as to increase the efficiency of compression beyond that otherwise achievable. Adaptive linear filtering is used to predict each sample value based on past sample values. The difference between predicted and actual sample values is encoded using a Golomb code.

  19. Software For Management Of A Packet-Radio Network

    NASA Technical Reports Server (NTRS)

    Smyth, Patrick J.; Chauvin, Todd H.; Oliver, Gordon P.; Statman, Joseph I.

    1994-01-01

    Network-management software assists in planning, monitoring, and controlling resources of Datalink network. Packet-message network featuring time-division multiple access, frequency and spatial diversity, and dynamic tree-structured routing scheme. Developed for communication between central control station on ground and instrumented aircraft flying over test range. Aircraft derives navigational data from satellites of Global Positioning System, and primary function of Datalink network feeding GPS position data from participating aircraft into control center in real time.

  20. Attosecond Electron Wave-Packet Interference Observed by Transient Absorption

    SciTech Connect

    Holler, M.; Schapper, F.; Gallmann, L.; Keller, U.

    2011-03-25

    We perform attosecond time-resolved transient absorption spectroscopy around the first ionization threshold of helium and observe rapid oscillations of the absorption of the individual harmonics as a function of time delay with respect to a superimposed, moderately strong infrared laser field. The phase relation between the absorption modulation of individual harmonics gives direct evidence for the interference of transiently bound electronic wave packets as the mechanism behind the absorption modulation.