Science.gov

Sample records for activity sampler ideas

  1. Iowa Developed Energy Activity Sampler (IDEAS), Grades 7-12: Language Arts.

    ERIC Educational Resources Information Center

    Simonis, Doris G.

    Presented is the Language Arts component of the Iowa Developed Energy Activity Sampler (IDEAS), a multidisciplinary energy education program designed for infusion into the curriculum of grades 7-12. Among the lessons included are an energy debate, puzzles, energy poetry, and energy life styles. Also contained in the IDEAS program are activity sets…

  2. Iowa Developed Energy Activity Sampler (IDEAS), Grades 7-12: Science.

    ERIC Educational Resources Information Center

    Simonis, Doris G.

    Presented is the Science component of the Iowa Developed Energy Activity Sampler (IDEAS), a multidisciplinary energy education program designed for infusion into the curriculum of grades 7-12. Also contained in the program are activity sets for Home Economics (SE 034 678), Industrial Arts (SE 034 679), Language Arts (SE 034 680), Mathematics (SE…

  3. Iowa Developed Energy Activity Sampler (IDEAS), Grades 7-12: Home Economics.

    ERIC Educational Resources Information Center

    Simonis, Doris G.

    Presented is the Home Economics component of the Iowa Developed Energy Activity Sampler (IDEAS), a multidisciplinary energy education program designed for infusion into the curriculum of grades 7-12. Also included in the program are activity sets for Industrial Arts (SE 034 679), Language Arts (SE 034 680), Mathematics (SE 034 681), Science (SE…

  4. Iowa Developed Energy Activity Sampler (IDEAS), Grades 7-12: Introduction.

    ERIC Educational Resources Information Center

    Simonis, Doris G.

    Presented is the Introduction for the Iowa Developed Energy Activity Sampler (IDEAS), a multidisciplinary energy education program designed for infusion into the curriculum of grades 7-12. Included in the program are activity sets for Home Economics (SE 034 678), Industrial Arts (SE 034 679), Language Arts (SE 034 680), Mathematics (SE 034 681),…

  5. Science. Iowa Developed Energy Activity Sampler, 6-12. Revised.

    ERIC Educational Resources Information Center

    Iowa State Dept. of Education, Des Moines. Div. of Instructional Services.

    The revised Iowa Developed Energy Activity Sampler (IDEAS) was compiled using the original IDEAS program and the Energy Conservation Activity Packets (ECAPS). This document is one of a series of revised IDEAS booklets, and provides activities for teaching science. The activities are intended to present energy principles in an interesting manner…

  6. Mathematics. Iowa Developed Energy Activity Sampler, 6-12. Revised.

    ERIC Educational Resources Information Center

    Iowa State Dept. of Education, Des Moines.

    The revised Iowa Developed Energy Activity Sampler (IDEAS) was compiled using the original IDEAS program and the Energy Conservation Activity Packets (ECAPS). This document is one of the series of revised IDEAS booklets, and provides activities for teaching mathematics. The activities are intended to present energy principles in an interesting…

  7. Science. Iowa Developed Energy Activity Sampler, 6-12. Revised.

    ERIC Educational Resources Information Center

    Iowa State Dept. of Education, Des Moines.

    The revised Iowa Developed Energy Activity Sampler (IDEAS) was compiled using the original IDEAS program and the Energy Conservation Activity Packets (ECAPS). This document is one of the series of revised IDEAS booklets, and provides activities for teaching science. The activities are intended to present energy principles in an interesting manner…

  8. Active Hydrazine Vapor Sampler (AHVS)

    NASA Technical Reports Server (NTRS)

    Young, Rebecca C.; Mcbrearty, Charles F.; Curran, Daniel J.

    1993-01-01

    The Active Hydrazine Vapor Sampler (AHVS) was developed to detect vapors of hydrazine (HZ) and monomethylhydrazine (MMH) in air at parts-per-billion (ppb) concentration levels. The sampler consists of a commercial personal pump that draws ambient air through paper tape treated with vanillin (4-hydroxy-3-methoxybenzaldehyde). The paper tape is sandwiched in a thin cardboard housing inserted in one of the two specially designed holders to facilitate sampling. Contaminated air reacts with vanillin to develop a yellow color. The density of the color is proportional to the concentration of HZ or MMH. The AHVS can detect 10 ppb in less than 5 minutes. The sampler is easy to use, low cost, and intrinsically safe and contains no toxic material. It is most beneficial for use in locations with no laboratory capabilities for instrumentation calibration. This paper reviews the development, laboratory test, and field test of the device.

  9. Mathematics. Iowa Developed Energy Activity Sampler, 6-12. Revised.

    ERIC Educational Resources Information Center

    Iowa State Dept. of Education, Des Moines. Div. of Instructional Services.

    The revised Iowa Developed Energy Activity Sampler (IDEAS) was compiled using the original IDEAS program and the Energy Conservation Activity Packets (ECAPS). This document contains teaching activities which are intended to strengthen students' mathematics skills and concepts, while broadening their understanding of energy concepts. Each of the 24…

  10. A Career Education Sampler: Teaching Ideas for Grades K-3.

    ERIC Educational Resources Information Center

    Douma, Elaine, Comp.

    This sampler is the product of the Career/Vocational Development Student Profile Project conducted in New Jersey in 1979-80. The purpose of the project was to field test the Career/Vocational Development K-14 Goal Matrix (see note) to see whether the goals, objectives, and indicators are realistic and appropriate for the age/grade levels they…

  11. Industrial Technology. Iowa Developed Energy Activity Sampler, 6-12. Revised.

    ERIC Educational Resources Information Center

    Iowa State Dept. of Education, Des Moines.

    The revised Iowa Developed Energy Activity Sampler (IDEAS) was compiled using the original IDEAS program and the Energy Conservation Activity Packets (ECAPS). This document is one of the series of revised IDEAS booklets, and provides activities for teaching industrial arts/technology education. The activities are intended to present energy…

  12. Industrial Technology. Iowa Developed Energy Activity Sampler, 6-12. Revised.

    ERIC Educational Resources Information Center

    Iowa State Dept. of Education, Des Moines. Div. of Instructional Services.

    The revised Iowa Developed Energy Activity Sampler (IDEAS) was compiled using the original IDEAS program and the Energy Conservation Activity Packets (ECAPS). This document is one of a series of revised IDEAS booklets, and provides learning activities for teachers to use with students in industrial arts/technology education. Each of the 17…

  13. Social Studies. Iowa Developed Energy Activity Sampler, 6-12. Revised.

    ERIC Educational Resources Information Center

    Iowa State Dept. of Education, Des Moines. Div. of Instructional Services.

    The revised Iowa Developed Energy Activity Sampler (IDEAS) was compiled using the original IDEAS program and the Energy Conservation Activity Packets (ECAPS). This document provides activities for teachers to use with students in teaching social studies. The activities are intended to demonstrate the impact of energy technology on today's society.…

  14. Home Economics. Iowa Developed Energy Activity Sampler, 6-12. Revised.

    ERIC Educational Resources Information Center

    Iowa State Dept. of Education, Des Moines. Div. of Instructional Services.

    The revised Iowa Developed Energy Activity Sampler (IDEAS) was compiled using the original IDEAS program and the Energy Conservation Activity Packets (ECAPS). This document was developed to provide home economics teachers with background information on energy, and activities that can be used/adapted with a minimum of preparation time. The…

  15. Evaluation of the particle infiltration efficiency of three passive samplers and the PS-1 active air sampler

    NASA Astrophysics Data System (ADS)

    Markovic, Milos Z.; Prokop, Sebastian; Staebler, Ralf M.; Liggio, John; Harner, Tom

    2015-07-01

    The particle infiltration efficiencies (PIE) of three passive and one active air samplers were evaluated under field conditions. A wide-range particle spectrometer operating in the 250-4140 nm range was used to acquire highly temporally resolved particle-number and size distributions for the different samplers compared to ambient air. Overall, three of the four evaluated samplers were able to acquire a representative sample of ambient particles with PIEs of 91.5 ± 13.7% for the GAPS Network sampler, 103 ± 15.5% for the Lancaster University sampler, and 89.6 ± 13.4% for a conventional PS-1 high-volume active air sampler (Hi-Vol). Significantly (p = 0.05) lower PIE of 54 ± 8.0% was acquired for the passive sampler used under the MONET program. These findings inform the comparability and use of passive and active samplers for measuring particle-associated priority chemicals in air.

  16. Library Media Skills Sampler. Volume I: A Sharing of Ideas from Practicing School Library Media Specialists in Iowa.

    ERIC Educational Resources Information Center

    Buckingham, Betty Jo, Comp.

    In response to the requests of library media workshop participants who were queried during the 1982-1983 school year by the Iowa Department of Public Instruction about what would be most helpful to them in the area of library skills, this sampler of library media skills teaching ideas was produced. Ideas were solicited from practicing library…

  17. Energy Conservation Activities for Elementary Grades (Or: How To Help Slim Down the Energy Monster). Iowa Developed Energy Activities Sampler, Primary K-2. Revised.

    ERIC Educational Resources Information Center

    Iowa State Dept. of Education, Des Moines.

    The revised Iowa Developed Energy Activity Sampler (IDEAS) was compiled using the original IDEAS program and the Energy Conservation Activity Packets (ECAPS). This booklet provides activities for teachers to use in the primary elementary grades (K-2). The activities are organized into nine units, with units 1 through 8 containing three activities…

  18. Energy Conservation Activities for Elementary Grades (Or: How to Help Slim Down the Energy Monster). Iowa Developed Energy Activities Sampler, Primary K-2.

    ERIC Educational Resources Information Center

    Iowa State Dept. of Education, Des Moines. Div. of Instructional Services.

    The revised Iowa Developed Energy Activity Sampler (IDEAS) was compiled using the original IDEAS program and the Energy Conservation Activity Packets (ECAPS). This booklet provides activities for teachers to use in the primary elementary grades (K-2). The activities are organized into nine units, with units I through VIII containing three…

  19. Energy Conservation Activities for Elementary Grades (Or: How to Help Slim Down the Energy Monster). Iowa Developed Energy Activities Sampler, Intermediate 3-5.

    ERIC Educational Resources Information Center

    Iowa State Dept. of Education, Des Moines. Div. of Instructional Services.

    The revised Iowa Developed Energy Activity Sampler (IDEAS) was compiled using the original IDEAS program and the Energy Conservation Activity Packets (ECAPS). This booklet provides activities for teachers in the intermediate elementary grades (3-5) and is designed to enable students to develop a comprehensive understanding of energy concepts. Each…

  20. Energy Conservation Activities for Elementary Grades (Or: How To Help Slim Down the Energy Monster). Iowa Developed Energy Activities Sampler, Intermediate 3-5. Revised.

    ERIC Educational Resources Information Center

    Iowa State Dept. of Education, Des Moines.

    The revised Iowa Developed Energy Activity Sampler (IDEAS) was compiled using the original IDEAS program and the Energy Conservation Activity Packets (ECAPS). This booklet provides activities for teachers in the intermediate elementary grades (3-5) and is designed to enable students to develop a comprehensive understanding of energy concepts. Each…

  1. A Career Education Sampler: Teaching Ideas for Grades 7-9.

    ERIC Educational Resources Information Center

    Douma, Elaine, Comp.

    This sampler is the product of the Career/Vocational Development Student Profile Project conducted in New Jersey in 1979-80. The purpose of the project was to field test the Career/Vocational Development K-14 Goal Matrix (see note) to see whether the goals, objectives, and indicators are realistic and appropriate for the age/grade levels they…

  2. A Career Education Sampler: Teaching Ideas for Grades 4-6.

    ERIC Educational Resources Information Center

    Douma, Elaine, Comp.

    This sampler is the product of the Career/Vocational Development Student Profile Project conducted in New Jersey in 1979-80. The purpose of the project was to field test the Career/Vocational Development K-14 Goal Matrix (see note) to see whether the goals, objectives, and indicators are realistic and appropriate for the age/grade levels they…

  3. Physical activity: practice this idea

    PubMed Central

    Guimarães, Guilherme Veiga; Ciolac, Emmanuel Gomes

    2014-01-01

    Sedentary habits or insufficient activities to promote health benefits can influence the occurrence of chronic diseases. The cardiovascular risk factors arise, at least partially, from the individual-environment interaction during life, and worsen with aging and lack of physical exercise. Health promotion and prevention are among the greatest challenges of public health policies. However, physical activity turns out to be rarely recommended and, thus have a very poor adhesion. In spite of consensus about the benefits of physical activity in both primary and secondary prevention, only 32% of adults and 66% of children and adolescents, according to Healthy People 2010 guideline, practice leisure-time physical activity. Thus, the regular practice of physical activity and healthy habits require changes in basic concepts in government and social policies. The higher involvement of public and private sectors related to health and education, the more expressive would be the reduction in socioeconomic costs and the improvement in quality of life. PMID:24551484

  4. Sea Sampler: Aquatic Activities for the Field and Classroom. Elementary, Grades K-6.

    ERIC Educational Resources Information Center

    Allen, Wendy Beard, Ed.; McLaughlin, Patty Owens, Ed.

    The samplers of aquatic activities that are contained in this guide have been reviewed and trial tested for use with both elementary and secondary level students. The activities were a result of South Carolina Sea Grant's efforts to expand marine education opportunities in the state. The table of contents alphabetically lists the activities…

  5. Ideas.

    ERIC Educational Resources Information Center

    Bazik, Edna F.; Tucker, Benny F.

    1983-01-01

    Two posters that involve digits and number activities designed to provide motivational activities for students are presented. It is thought the posters can be used to introduce some ideas from elementary number theory. Both primary objectives and possible instructional extensions are reviewed. (Author/MP)

  6. Ideas.

    ERIC Educational Resources Information Center

    Fennell, Francis (Skip); And Others

    1982-01-01

    A variety of ideas for working with money are presented. Activities provide experience in counting nickels and dimes, counting money and making change, determining sale prices by computing the percentage off a base or regular price, and keeping a record of current balances in checking and savings accounts. (MP)

  7. Behaviordelia Sampler.

    ERIC Educational Resources Information Center

    Malott, Richard W., Ed.

    Behaviordelia Sampler is based on the same principle as a candy sampler or record sampler. It compiles excerpts from a variety of texts which Behaviordelia is now publishing. It is intended as a supplementary book of readings for courses in psychology and related fields and also as a catalog of their materials. Much of the sampler uses a comic…

  8. Ideas

    ERIC Educational Resources Information Center

    Immerzeel, George; Wiederanders, Don

    1974-01-01

    Four ideas are presented, each a variation of the tic-tac-toe game. Recognizing three addends is the goal of the primary level game; experiences with basic facts and fractions are objectives for upper levels. Each worksheet includes objectives, directions, and comments. (LS)

  9. Ideas.

    ERIC Educational Resources Information Center

    Arithmetic Teacher, 1987

    1987-01-01

    Activities are presented that focus on attributes of numbers. The activities highlight such attributes as more than, equal to, greater than, less than, LCM, prime and factor. The activities provide practice in motivational game-oriented situations. (RH)

  10. Ideas.

    ERIC Educational Resources Information Center

    Shaw, Jean M.

    1993-01-01

    Focuses on connections between mathematics and environmental concerns. Activities were designed to make students aware of, and increase their knowledge of, the various materials people ordinarily use and discard and ways to use materials more conservatively. Each activity includes data gathering, graphing, and interpreting data. Activity sheets…

  11. Ideas.

    ERIC Educational Resources Information Center

    Cook, Marcy

    1989-01-01

    Provided are four activities focusing on the application of mathematics to real-world situations: (1) Baby Weight; (2) High Temperature; (3) Skin Weight; and (4) Whale Weight. Each activity contains the objective, directions, extensions, and answers with worksheet. The activities required include the skills of making charts and graphs. (YP)

  12. IDEAS.

    ERIC Educational Resources Information Center

    Barnett, Carne S.

    1991-01-01

    Four activities are described which focus on consumer awareness and judgment using data collection and judgment skills involving data from footwear. Worksheets for data collection and activities at home and at school are included. A set of ratings of sneakers from "Consumer Reports" magazine is provided. (CW)

  13. Ideas.

    ERIC Educational Resources Information Center

    Hopkins, Martha H.; Gard, Diane M.

    1992-01-01

    Describes 4 activities for levels K-2, 3-5, 4-6, and 6-8 and a family activity that asks students to describe their community; use coordinates to represent the 4 voyages of Columbus; write a story based on a line graph of Lewis and Clark's expedition; determine serving sizes for astronauts in space; and investigate different modes of…

  14. IDEAS

    ERIC Educational Resources Information Center

    Bright, George W.

    1977-01-01

    Four activities concerning addition and subtraction are described. They range in appropriate grade level from K-2 (crossing out objects) to 6-8 (solving decimal inequalities). Masters for worksheets are provided. (SD)

  15. IDEAS.

    ERIC Educational Resources Information Center

    Young, Sharon L.

    1991-01-01

    Presented are activities that focus on gathering, using, and interpreting data about fingerprints as a basis for integrating mathematics and science. Patterns, classification, logical reasoning, and mathematical relationships are explored by making graphs, classifying fingerprints, and matching identical fingerprints. A parent-involvement activity…

  16. Honey Bees (Apis mellifera, L.) as Active Samplers of Airborne Particulate Matter.

    PubMed

    Negri, Ilaria; Mavris, Christian; Di Prisco, Gennaro; Caprio, Emilio; Pellecchia, Marco

    2015-01-01

    Honey bees (Apis mellifera L.) are bioindicators of environmental pollution levels. During their wide-ranging foraging activity, these hymenopterans are exposed to pollutants, thus becoming a useful tool to trace the environmental contaminants as heavy metals, pesticides, radionuclides and volatile organic compounds. In the present work we demonstrate that bees can also be used as active samplers of airborne particulate matter. Worker bees were collected from hives located in a polluted postmining area in South West Sardinia (Italy) that is also exposed to dust emissions from industrial plants. The area is included in an official list of sites of national interest for environmental remediation, and has been characterized for the effects of pollutants on the health of the resident population. The head, wings, hind legs and alimentary canal of the bees were investigated with Scanning Electron Microscopy coupled with X-ray spectroscopy (SEM-EDX). The analyses pointed to specific morphological and chemical features of the particulate, and resulted into the identification of three categories of particles: industry-, postmining-, and soil-derived. With the exception of the gut, all the analyzed body districts displayed inorganic particles, mostly concentrated in specific areas of the body (i.e. along the costal margin of the fore wings, the medial plane of the head, and the inner surface of the hind legs). The role of both past mining activities and the industrial activity close to the study area as sources of the particulate matter is also discussed. We conclude that honey bees are able to collect samples of the main airborne particles emitted from different sources, therefore could be an ideal tool for monitoring such a kind of pollutants.

  17. Honey Bees (Apis mellifera, L.) as Active Samplers of Airborne Particulate Matter

    PubMed Central

    Di Prisco, Gennaro; Caprio, Emilio; Pellecchia, Marco

    2015-01-01

    Honey bees (Apis mellifera L.) are bioindicators of environmental pollution levels. During their wide-ranging foraging activity, these hymenopterans are exposed to pollutants, thus becoming a useful tool to trace the environmental contaminants as heavy metals, pesticides, radionuclides and volatile organic compounds. In the present work we demonstrate that bees can also be used as active samplers of airborne particulate matter. Worker bees were collected from hives located in a polluted postmining area in South West Sardinia (Italy) that is also exposed to dust emissions from industrial plants. The area is included in an official list of sites of national interest for environmental remediation, and has been characterized for the effects of pollutants on the health of the resident population. The head, wings, hind legs and alimentary canal of the bees were investigated with Scanning Electron Microscopy coupled with X-ray spectroscopy (SEM-EDX). The analyses pointed to specific morphological and chemical features of the particulate, and resulted into the identification of three categories of particles: industry -, postmining -, and soil –derived. With the exception of the gut, all the analyzed body districts displayed inorganic particles, mostly concentrated in specific areas of the body (i.e. along the costal margin of the fore wings, the medial plane of the head, and the inner surface of the hind legs). The role of both past mining activities and the industrial activity close to the study area as sources of the particulate matter is also discussed. We conclude that honey bees are able to collect samples of the main airborne particles emitted from different sources, therefore could be an ideal tool for monitoring such a kind of pollutants. PMID:26147982

  18. Sampling trace organic compounds in water: a comparison of a continuous active sampler to continuous passive and discrete sampling methods

    USGS Publications Warehouse

    Coes, Alissa L.; Paretti, Nicholas V.; Foreman, William T.; Iverson, Jana L.; Alvarez, David A.

    2014-01-01

    A continuous active sampling method was compared to continuous passive and discrete sampling methods for the sampling of trace organic compounds (TOCs) in water. Results from each method are compared and contrasted in order to provide information for future investigators to use while selecting appropriate sampling methods for their research. The continuous low-level aquatic monitoring (CLAM) sampler (C.I.Agent® Storm-Water Solutions) is a submersible, low flow-rate sampler, that continuously draws water through solid-phase extraction media. CLAM samplers were deployed at two wastewater-dominated stream field sites in conjunction with the deployment of polar organic chemical integrative samplers (POCIS) and the collection of discrete (grab) water samples. All samples were analyzed for a suite of 69 TOCs. The CLAM and POCIS samples represent time-integrated samples that accumulate the TOCs present in the water over the deployment period (19–23 h for CLAM and 29 days for POCIS); the discrete samples represent only the TOCs present in the water at the time and place of sampling. Non-metric multi-dimensional scaling and cluster analysis were used to examine patterns in both TOC detections and relative concentrations between the three sampling methods. A greater number of TOCs were detected in the CLAM samples than in corresponding discrete and POCIS samples, but TOC concentrations in the CLAM samples were significantly lower than in the discrete and (or) POCIS samples. Thirteen TOCs of varying polarity were detected by all of the three methods. TOC detections and concentrations obtained by the three sampling methods, however, are dependent on multiple factors. This study found that stream discharge, constituent loading, and compound type all affected TOC concentrations detected by each method. In addition, TOC detections and concentrations were affected by the reporting limits, bias, recovery, and performance of each method.

  19. Sampling trace organic compounds in water: a comparison of a continuous active sampler to continuous passive and discrete sampling methods.

    PubMed

    Coes, Alissa L; Paretti, Nicholas V; Foreman, William T; Iverson, Jana L; Alvarez, David A

    2014-03-01

    A continuous active sampling method was compared to continuous passive and discrete sampling methods for the sampling of trace organic compounds (TOCs) in water. Results from each method are compared and contrasted in order to provide information for future investigators to use while selecting appropriate sampling methods for their research. The continuous low-level aquatic monitoring (CLAM) sampler (C.I.Agent® Storm-Water Solutions) is a submersible, low flow-rate sampler, that continuously draws water through solid-phase extraction media. CLAM samplers were deployed at two wastewater-dominated stream field sites in conjunction with the deployment of polar organic chemical integrative samplers (POCIS) and the collection of discrete (grab) water samples. All samples were analyzed for a suite of 69 TOCs. The CLAM and POCIS samples represent time-integrated samples that accumulate the TOCs present in the water over the deployment period (19-23 h for CLAM and 29 days for POCIS); the discrete samples represent only the TOCs present in the water at the time and place of sampling. Non-metric multi-dimensional scaling and cluster analysis were used to examine patterns in both TOC detections and relative concentrations between the three sampling methods. A greater number of TOCs were detected in the CLAM samples than in corresponding discrete and POCIS samples, but TOC concentrations in the CLAM samples were significantly lower than in the discrete and (or) POCIS samples. Thirteen TOCs of varying polarity were detected by all of the three methods. TOC detections and concentrations obtained by the three sampling methods, however, are dependent on multiple factors. This study found that stream discharge, constituent loading, and compound type all affected TOC concentrations detected by each method. In addition, TOC detections and concentrations were affected by the reporting limits, bias, recovery, and performance of each method.

  20. Black History and Culture. Ideas and Activities for Studying.

    ERIC Educational Resources Information Center

    Stanton, Roland; And Others

    This booklet contains information, ideas, and activities to help schools celebrate Black History Week. It is devoted to black achievements in the areas of music, politics, and business with the intention of developing respect for, awareness of, and a sense of the relationship between past and present events in the history of black Americans. There…

  1. Use of reference chemicals to determine passive uptake rates of common indoor air VOCs by collocation deployment of active and passive samplers.

    PubMed

    Xian, Qiming; Feng, Yong-Lai; Chan, Cecilia C; Zhu, Jiping

    2011-09-01

    Passive samplers have become more popular in their application in the measurement of airborne chemicals. For volatile organic compounds, the rate of a chemical's diffusivity is a determining factor in the quantity of the chemical being collected for a given passive sampler. While uptake rate of a chemical in the passive sampler can be determined either by collocation deployment of both active and passive samplers or use of controlled facilities such as environmental chambers, a new approach without a need for accurate active flow rate in the collocation experiment was demonstrated in this study. This approach uses chemicals of known uptake rates as references to calculate the actual flow rate of the active sampling in the collocation experiment. The active sampling rate in turn can be used in the determination of the uptake rates of all other chemicals present in the passive samplers. The advantage of such approach is the elimination of the errors in actual active sampling rate associated with low flow employed in the collocation experiment. Using this approach, passive uptake rates of more than 80 volatile organic compounds commonly present in indoor air were determined. These experimentally determined uptake rates correlate well with air diffusivity of the chemicals, indicating the regression equation describing such correlation might be useful in predicting the uptake rates of other volatile organic chemicals in indoor air based on their air diffusivity.

  2. Use of depuration compounds in passive air samplers: results from active sampling-supported field deployment, potential uses, and recommendations.

    PubMed

    Moeckel, Claudia; Harner, Tom; Nizzetto, Luca; Strandberg, Bo; Lindroth, Anders; Jones, Kevin C

    2009-05-01

    Depuration compounds (DCs) are added to passive air samplers (PAS) prior to deployment to account for the wind-dependency of the sampling rate for gas-phase compounds. This correction is particularly useful for providing comparable data for samplers that are deployed in different environments and subject to different meteorological conditions such as wind speeds. Two types of PAS--the polyurethane foam (PUF) disk sampler and semipermeable membrane devices (SPMDs)--were deployed at eight heights on a 100 m tower to test whether the DC approach could yield air concentrations profiles for PCBs and organochlorine pesticides and account for the wind speed gradient with height. Average wind speeds ranged from 0.3 to 4.5 m s(-1) over the 40 day deployment, increasing with height Two low volume active air samples (AAS), one collected at 25 m and one at 73 m over the 40 day deployment showed no significant concentration differences for target compounds. As expected, the target compounds taken up by PAS reflected the wind profile with height This wind-dependency of the PAS was also reflected in the results of the DCs. A correction based on the DC approach successfully accounted for the effect of wind on PAS sampling rates, yielding a profile consistent with the AAS. Interestingly, in terms of absolute air concentrations, there were differences between the AAS and PAS-derived values for some target compounds. These were attributed to different sampling characteristics of the two approaches that may have resulted in slightly different air masses being sampled. Based on the results of this study, guidelines are presented for the use of DCs and for the calibration of PAS using AAS.

  3. Sludge sampler

    DOEpatents

    Ward, R.C.

    1981-06-25

    The disclosure relates to a sludge sampler comprising an elongated generally cylindrical housing containing a baffle containing an aperture. Connected to the aperture is a flexible tubing having a valve for maintaining and releasing pressure in the lower end of the housing and exiting the upper end of the housing. The lower end of the housing contains a ball check valve maintained in closed position by pressure. When the lower end of the device contacts the sludge bed, the pressure valve is opened, enabling sludge to enter the lower end of the housing. After the sample is collected the valve is closed. An upsetting pin opens the valve to empty a sludge sample after the sample is removed from the fluid.

  4. Sludge sampler

    DOEpatents

    Ward, Ralph C.

    1983-01-01

    The disclosure relates to a sludge sampler comprising an elongated generally cylindrical housing containing a baffle containing an aperture. Connected to the aperture is a flexible tubing having a valve for maintaining and releasing pressure in the lower end of the housing and exiting the upper end of the housing. The lower end of the housing contains a ball check valve maintained in closed position by pressure. When the lower end of the device contacts the sludge bed, the pressure valve is opened, enabling sludge to enter the lower end of the housing. After the sample is collected the valve is closed. An upsetting pin opens the valve to empty a sludge sample after the sample is removed from the fluid.

  5. Environmental Curiosity Sampler 2: For Use with Environmental Study Areas in Illinois.

    ERIC Educational Resources Information Center

    Stehney, Virginia A.

    The Sampler provides ideas and lists resources for an interdisciplinary study of environment in terms of a person's immediate surroundings, distant sites, and facilities. Although it was developed for use by parents, teachers, youth group leaders, students, and interested individuals in the state of Illinois, many of the activities would be…

  6. Floating sample-collection platform with stage-activated automatic water sampler for streams with large variation in stage

    USGS Publications Warehouse

    Tarte, Stephen R.; Schmidt, A.R.; Sullivan, Daniel J.

    1992-01-01

    A floating sample-collection platform is described for stream sites where the vertical or horizontal distance between the stream-sampling point and a safe location for the sampler exceed the suction head of the sampler. The platform allows continuous water sampling over the entire storm-runoff hydrogrpah. The platform was developed for a site in southern Illinois.

  7. A new passive sampler for collecting atmospheric tritiated water vapor

    NASA Astrophysics Data System (ADS)

    Feng, Bin; Chen, Bo; Zhuo, Weihai; Zhang, Weiyuan

    2017-04-01

    A new passive sampler was developed for collecting environmental tritiated water vapor. The construction of the sampler was improved according to computational fluid dynamics (CFD) simulations in which the influence on vapor collection by the turbulence inside the sampler was considered. Through changes in temperature from 5 °C to 35 °C and relative humidity from 45% to 90%, the new sampler revealed stable performance of the sampling rate. Compared with the previous samplers, the new sampler significantly lowered the effect of wind speed. Using the adsorption kinetic curve of the sampler provided in the co-comparison experiments, the quantitative relationship between the mass of adsorbed water and the cumulative absolute humidity exposure was established. Field applications in the vicinity of a nuclear power plant show that the data obtained by the new samplers is consistent with the active measurement. The sampler was preliminarily proven to be reliable and flexible for field investigation of HTO in the atmosphere.

  8. Creative Writing: Activity Ideas for Grades 7, 8, and 9.

    ERIC Educational Resources Information Center

    Chase, Cheryl M.; Marler, Joyce

    This booklet is one of a series developed by the Northern Colorado Educational Board of Cooperative Services to make available to teachers ideas designed and tested by other teachers. Many of the ideas are from educational journals as well as from the Educational Resources Information Center (ERIC). The booklet is divided into eight sections:…

  9. Student Activity Ideas for the Technology Sequence Systems and Foundation Courses.

    ERIC Educational Resources Information Center

    New York State Education Dept., Albany.

    This publication provides single-page outlines of brief ideas for high school student activities in each of the System and Foundation Courses of the New York State technology sequence. The idea outlines are provided as a resource to assist teachers in the development of student learning activities. The six courses for which ideas are presented are…

  10. Solid sorbent air sampler

    NASA Astrophysics Data System (ADS)

    Galen, T. J.

    1986-04-01

    A fluid sampler for collecting a plurality of discrete samples over separate time intervals is described. The sampler comprises a sample assembly having an inlet and a plurality of discreet sample tubes each of which has inlet and outlet sides. A multiport dual acting valve is provided in the sampler in order to sequentially pass air from the sample inlet into the selected sample tubes. The sample tubes extend longitudinally of the housing and are located about the outer periphery thereof so that upon removal of an enclosure cover, they are readily accessible for operation of the sampler in an analysis mode.

  11. Solid sorbent air sampler

    NASA Technical Reports Server (NTRS)

    Galen, T. J. (Inventor)

    1986-01-01

    A fluid sampler for collecting a plurality of discrete samples over separate time intervals is described. The sampler comprises a sample assembly having an inlet and a plurality of discreet sample tubes each of which has inlet and outlet sides. A multiport dual acting valve is provided in the sampler in order to sequentially pass air from the sample inlet into the selected sample tubes. The sample tubes extend longitudinally of the housing and are located about the outer periphery thereof so that upon removal of an enclosure cover, they are readily accessible for operation of the sampler in an analysis mode.

  12. Iowa Developed Energy Activity Sampler 6-12. Home Economics. Revised.

    ERIC Educational Resources Information Center

    Iowa State Dept. of Education, Des Moines. Div. of Instructional Services.

    This set of activities is intended to assist home economics teachers in incorporating basic energy education concepts into traditional home economics topics. Awareness activities that are intended to help students develop an understanding of fundamental energy conservation concepts and, at the same time, apply these concepts in home economics…

  13. Iowa Developed Energy Activity Sampler: 6-12. Social Studies. Revised 1987.

    ERIC Educational Resources Information Center

    Iowa State Dept. of Education, Des Moines.

    Thirty-eight energy related classroom activities for sixth to twelfth grade are included in this document. The activities are based on the following conceptual themes: (1) energy is basic; (2) energy's usefulness is limited; (3) energy exchanges affect the environment; (4) energy conservation is essential; and (5) people can develop and share…

  14. Engaging the Families of ELLs: Ideas, Resources, and Activities

    ERIC Educational Resources Information Center

    Rubin, Renee; Abrego, Michelle H.; Sutterby, John A.

    2012-01-01

    Learn how to involve the diverse families of English language learners with the effective, practical approaches in this book. This must-have resource for teachers and school leaders is packed with fresh ideas geared toward building a partnership between school communities and ELL families. The authors begin each chapter with realistic scenarios…

  15. Environmental Curiosity Sampler.

    ERIC Educational Resources Information Center

    Stehney, Virginia A.

    The Sampler is designed to stimulate teachers, parents, students, and groups to look at various types of open spaces and facilities as resources for environmental study. Written for use with children, but adaptable to older groups, the Sampler tries to engage the feelings as well as intellects of its users in the process of inquiry. It locates…

  16. Idea Bank.

    ERIC Educational Resources Information Center

    Science Teacher, 1993

    1993-01-01

    Presents three teaching ideas entitled (1) Rearview Mirrors; (2) Chills and Fevers; and (3) Science Activities and the Learner. The second idea presents a poem to help students with the relationship between Centigrade and Fahrenheit. The third idea presents activities on evaporation. (PR)

  17. Bright Ideas.

    ERIC Educational Resources Information Center

    Instructor, 1979

    1979-01-01

    Presents ideas for teaching techniques and learning activities in areas such as: New Year's resolutions, bird feeding, typing to spell, using thermometers, and activities utilizing old calendars. (JMB)

  18. The Shoe Box Curriculum: Practical Ideas for Active Learning.

    ERIC Educational Resources Information Center

    Molnar, Alex; Roy, Will

    This book contains 65 specific activities designed to help disadvantaged students learn to use language more skillfully and develop the ability to function well in the school environment. The descriptions of the activities are referred to as shoe box labs and generally include the title of the activity, instructions for performing the activity,…

  19. The Gibbs Centroid Sampler.

    PubMed

    Thompson, William A; Newberg, Lee A; Conlan, Sean; McCue, Lee Ann; Lawrence, Charles E

    2007-07-01

    The Gibbs Centroid Sampler is a software package designed for locating conserved elements in biopolymer sequences. The Gibbs Centroid Sampler reports a centroid alignment, i.e. an alignment that has the minimum total distance to the set of samples chosen from the a posteriori probability distribution of transcription factor binding-site alignments. In so doing, it garners information from the full ensemble of solutions, rather than only the single most probable point that is the target of many motif-finding algorithms, including its predecessor, the Gibbs Recursive Sampler. Centroid estimators have been shown to yield substantial improvements, in both sensitivity and positive predictive values, to the prediction of RNA secondary structure and motif finding. The Gibbs Centroid Sampler, along with interactive tutorials, an online user manual, and information on downloading the software, is available at: http://bayesweb.wadsworth.org/gibbs/gibbs.html.

  20. Variable percentage sampler

    DOEpatents

    Miller, Jr., William H.

    1976-01-01

    A remotely operable sampler is provided for obtaining variable percentage samples of nuclear fuel particles and the like for analyses. The sampler has a rotating cup for a sample collection chamber designed so that the effective size of the sample inlet opening to the cup varies with rotational speed. Samples of a desired size are withdrawn from a flowing stream of particles without a deterrent to the flow of remaining particles.

  1. Steal These Ideas! Winning Activities from Real Teachers

    ERIC Educational Resources Information Center

    Instructor, 2007

    2007-01-01

    This article presents several winning activities for students in the classroom. These activities include: (1) making Abraham Lincoln costumes; (2) creating frosty scenes from torn-paper collage for a grammar activity; (3) listening to Dr. Martin Luther King's "I have a Dream" speech; (4) hosting an architectural challenge for a kindergarten class;…

  2. Good Ideas: An Activity Book for Early Childhood.

    ERIC Educational Resources Information Center

    Tucker, Jamie, Comp.; And Others

    Presented are descriptions of 245 activities for use with young handicapped children. The activities, compiled by teachers in the Austin Early Childhood Special Education Program, are grouped according to the following 12 areas: pre-academic, language, science, perceptual, motor, games, music and creative expression, social-emotional, arts and…

  3. RIF Book of Ideas: Activities to Motivate Reading.

    ERIC Educational Resources Information Center

    Smithsonian Institution, Washington, DC. National Reading is Fun-damental Program.

    Readily adaptable to classrooms, youth service organizations, and other groups that serve young people, the motivation activities in this book were set up for Reading is Fundamental projects and field tested by the organization's volunteers. Following an introduction to the characteristics of a good motivational activity and some guidelines for…

  4. School-Age Ideas and Activities for After School Programs.

    ERIC Educational Resources Information Center

    Haas-Foletta, Karen; Cogley, Michele

    This guide describes activities for school-age children in after-school day care programs. These activities may also be used in other settings. An introductory section discusses program philosophy, room arrangement, multicultural curriculum, program scheduling, summer programs and holiday care, field trips and special programs, age grouping,…

  5. Student Engagement with Artefacts and Scientific Ideas in a Laboratory and a Concept-Mapping Activity

    ERIC Educational Resources Information Center

    Hamza, Karim Mikael; Wickman, Per-Olof

    2013-01-01

    The purpose of this study is to use a comparative approach to scrutinize the common assumption that certain school science activities are theoretical and therefore particularly suited for engaging students with scientific ideas, whereas others are practical and, thus, not equally conducive to engagement with scientific ideas. We compared two…

  6. Test report -- Prototype core sampler

    SciTech Connect

    Linschooten, C.G.

    1995-01-17

    The purpose of this test is to determine the adequacy of the prototype sampler, provided to Westinghouse Hanford Company (WHC) by DOE-RL. The sampler was fabricated for DOE-RL by the Concord Company by request of DOE-RL. This prototype sampler was introduced as a technology that can be easily deployed (similar to the current auger system) and will reliably collect representative samples. The sampler is similar to the Universal Sampler i.e., smooth core barrel and piston with an O-ring seal, but lacks a rotary valve near the throat of the sampler. This makes the sampler inappropriate for liquid sampling, but reduces the outside diameter of the sampler considerably, which should improve sample recovery. Recovery testing was performed with the supplied sampler in three different consistencies of Kaolin sludge simulants.

  7. Using the Historical Environment: Practical Ideas and Activities for Teachers.

    ERIC Educational Resources Information Center

    1996

    This handbook provides eight detailed interdisciplinary lesson plans, with art, archaeological, and architectural heritage of historical British sites as the introductory focus. Historical background is combined with a variety of possible content area approaches, documentary sources, and photocopiable activity sheets for classroom and on-site…

  8. Junior Achievement Lesson Plans and Activity Ideas, 1997-98.

    ERIC Educational Resources Information Center

    Junior Achievemnt, Inc., Colorado Springs, CO.

    This packet contains economics lesson plans and activities for the high school student. Detailed lesson plans and worksheets address the following concepts: (1) stock market; (2) economics of water; (3) diaper economics; (4) quality; (5) scarcity; (6) steps to success; (7) effective marketing; (8) careers and success; (9) interviewing tips and…

  9. Novel Ideas for Young Readers! Projects and Activities.

    ERIC Educational Resources Information Center

    Kuta, Katherine Wiesolek; Zernial, Susan

    This book offers 60 stimulating, classroom-tested activities to instill a love of literature and help young learners develop as readers, writers, and speakers. By using picture books, novels, or even nonfiction readings as starting points, the reproducible worksheets in the book can be implemented to strengthen students' entire spectrum of…

  10. 250+ Activities and Ideas for Developing Literacy Skills.

    ERIC Educational Resources Information Center

    Jay, Hilda L.; Jay, M. Ellen

    Designed for use at school or at home, this book focuses on the development of seven types of literacy: linguistic, visual, mathematical, scientific, geographic, economic, and computer. The book's suggested activities are each introduced with a detailed discussion of the necessary prerequisite skills, the concepts to be mastered, the materials…

  11. Energizing Your Curricula--Ideas/Activities for Immediate Classroom Implementation.

    ERIC Educational Resources Information Center

    Christensen, John; And Others

    1978-01-01

    Secondary-level activities include throwing dice to model exponential growth, measuring caloric values, and determining the efficiency of fluorescent and incandescent lighting. Students also measure the amount of heat absorbed in a closed car in the sun, and "spin" a good life web in order to visualize the entanglements of a high standard of…

  12. Creative Sciencing. Ideas and Activities for Teachers and Children. Grades K-6. Third Edition.

    ERIC Educational Resources Information Center

    De Vito, Alfred; Krockover, Gerald H.

    This resource book includes 163 science activities for both preservice and in-service teachers. Activities have been field-tested and are cross-referenced according to the processes of science and the content area covered. Each activity has been written to evoke ideas from the reader, thus enabling each activity to serve a base for additional…

  13. Breathing zone air sampler

    DOEpatents

    Tobin, John

    1989-01-01

    A sampling apparatus is provided which comprises a sampler for sampling air in the breathing zone of a wearer of the apparatus and a support for the sampler preferably in the form of a pair of eyeglasses. The sampler comprises a sampling assembly supported on the frame of the eyeglasses and including a pair of sample transport tubes which are suspended, in use, centrally of the frame so as to be disposed on opposite sides of the nose of the wearer and which each include an inlet therein that, in use, is disposed adjacent to a respective nostril of the nose of the wearer. A filter holder connected to sample transport tubes supports a removable filter for filtering out particulate material in the air sampled by the apparatus. The sample apparatus is connected to a pump for drawing air into the apparatus through the tube inlets so that the air passes through the filter.

  14. Isokinetic air sampler

    DOEpatents

    Sehmel, George A.

    1979-01-01

    An isokinetic air sampler includes a filter, a holder for the filter, an air pump for drawing air through the filter at a fixed, predetermined rate, an inlet assembly for the sampler having an inlet opening therein of a size such that isokinetic air sampling is obtained at a particular wind speed, a closure for the inlet opening and means for simultaneously opening the closure and turning on the air pump when the wind speed is such that isokinetic air sampling is obtained. A system incorporating a plurality of such samplers provided with air pumps set to draw air through the filter at the same fixed, predetermined rate and having different inlet opening sizes for use at different wind speeds is included within the ambit of the present invention as is a method of sampling air to measure airborne concentrations of particulate pollutants as a function of wind speed.

  15. Breathing zone air sampler

    SciTech Connect

    Tobin, J.

    1989-08-22

    A sampling apparatus is presented which comprises a sampler for sampling air in the breathing zone of a wearer of the apparatus and a support for the sampler preferably in the form of a pair of eyeglasses. The sampler comprises a sampling assembly supported on the frame of the eyeglasses and including a pair of sample transport tubes which are suspended, in use, centrally of the frame so as to be disposed on opposite sides of the nose of the wearer and which each include an inlet therein that, in use, is disposed adjacent to a respective nostril of the nose of the wearer. A filter holder connected to sample transport tubes supports a removable filter for filtering out particulate material in the air sampled by the apparatus. The sample apparatus is connected to a pump for drawing air into the apparatus through the tube inlets so that the air passes through the filter.

  16. Ohio Sampler: Outdoor and Environmental Education.

    ERIC Educational Resources Information Center

    Ballbach, Joann, Ed.

    This document provides practical suggestions and meaningful activities for implementing Ohio's model curriculum in science for instruction that emphasizes hands-on experience and diverse learning opportunities. It also includes a variety of nonscience activities that emphasize and utilize the outdoors. This Sampler lists activities by indoor or…

  17. Student Engagement with Artefacts and Scientific Ideas in a Laboratory and a Concept-Mapping Activity

    NASA Astrophysics Data System (ADS)

    Mikael Hamza, Karim; Wickman, Per-Olof

    2013-09-01

    The purpose of this study is to use a comparative approach to scrutinize the common assumption that certain school science activities are theoretical and therefore particularly suited for engaging students with scientific ideas, whereas others are practical and, thus, not equally conducive to engagement with scientific ideas. We compared two school science activities, one (laboratory work) that is commonly regarded as focusing attention on artefacts that may distract students from central science concepts and the other (concept mapping) that is thought to make students focus directly on these concepts. We observed students in either a laboratory activity about real galvanic cells or a concept-mapping activity about idealized galvanic cells. We used a practical epistemology analysis to compare the two activities regarding students' actions towards scientific ideas and artefacts. The comparison revealed that the two activities, despite their alleged differences along the theory-practice scale, primarily resulted in similar student actions. For instance, in both activities, students interacted extensively with artefacts and, to a lesser extent, with scientific ideas. However, only occasionally did students establish any explicit continuity between artefacts and scientific ideas. The findings indicate that some of the problems commonly considered to be unique for school science practical work may indeed be a feature of school science activities more generally.

  18. Evaluating the Relationship between Equilibrium Passive Sampler Uptake and Aquatic Organism Bioaccumulation,

    EPA Science Inventory

    Objectives. This review evaluates passive sampler uptake of hydrophobic organic contaminants (HOCs) in water column and interstitial water exposures as a surrogate for organism bioaccumulation. Approach/Activities. Fifty-five studies were found where both passive sampler uptake...

  19. Earth Child: Games, Stories, Activities, Experiments & Ideas about Living Lightly on Planet Earth.

    ERIC Educational Resources Information Center

    Sheehan, Kathryn; Waidner, Mary

    This book is a collection of activities, stories, ideas, and games designed to help adults and young children develop a shared awareness of their environment. The material is presented in eight chapters. Activities and stories are interwoven throughout each chapter to provide a holistic view of the topic covered. The end of each chapter contains…

  20. Variable depth core sampler

    DOEpatents

    Bourgeois, Peter M.; Reger, Robert J.

    1996-01-01

    A variable depth core sampler apparatus comprising a first circular hole saw member, having longitudinal sections that collapses to form a point and capture a sample, and a second circular hole saw member residing inside said first hole saw member to support the longitudinal sections of said first hole saw member and prevent them from collapsing to form a point. The second hole saw member may be raised and lowered inside said first hole saw member.

  1. High speed transient sampler

    DOEpatents

    McEwan, T.E.

    1995-11-28

    A high speed sampler comprises a meandered sample transmission line for transmitting an input signal, a straight strobe transmission line for transmitting a strobe signal, and a plurality of sampling gates along the transmission lines. The sampling gates comprise a four terminal diode bridge having a first strobe resistor connected from a first terminal of the bridge to the positive strobe line, a second strobe resistor coupled from the third terminal of the bridge to the negative strobe line, a tap connected to the second terminal of the bridge and to the sample transmission line, and a sample holding capacitor connected to the fourth terminal of the bridge. The resistance of the first and second strobe resistors is much higher than the signal transmission line impedance in the preferred system. This results in a sampling gate which applies a very small load on the sample transmission line and on the strobe generator. The sample holding capacitor is implemented using a smaller capacitor and a larger capacitor isolated from the smaller capacitor by resistance. The high speed sampler of the present invention is also characterized by other optimizations, including transmission line tap compensation, stepped impedance strobe line, a multi-layer physical layout, and unique strobe generator design. A plurality of banks of such samplers are controlled for concatenated or interleaved sample intervals to achieve long sample lengths or short sample spacing. 17 figs.

  2. High speed transient sampler

    DOEpatents

    McEwan, Thomas E.

    1995-01-01

    A high speed sampler comprises a meandered sample transmission line for transmitting an input signal, a straight strobe transmission line for transmitting a strobe signal, and a plurality of sampling gates along the transmission lines. The sampling gates comprise a four terminal diode bridge having a first strobe resistor connected from a first terminal of the bridge to the positive strobe line, a second strobe resistor coupled from the third terminal of the bridge to the negative strobe line, a tap connected to the second terminal of the bridge and to the sample transmission line, and a sample holding capacitor connected to the fourth terminal of the bridge. The resistance of the first and second strobe resistors is much higher than the signal transmission line impedance in the preferred system. This results in a sampling gate which applies a very small load on the sample transmission line and on the strobe generator. The sample holding capacitor is implemented using a smaller capacitor and a larger capacitor isolated from the smaller capacitor by resistance. The high speed sampler of the present invention is also characterized by other optimizations, including transmission line tap compensation, stepped impedance strobe line, a multi-layer physical layout, and unique strobe generator design. A plurality of banks of such samplers are controlled for concatenated or interleaved sample intervals to achieve long sample lengths or short sample spacing.

  3. Evaluation of a passive air sampler for measuring indoor formaldehyde.

    PubMed

    Kim, Sun-Tae; Yim, Bongbeen; Jeong, Jaeho

    2007-04-01

    A passive air sampler, using 4-amino-3-hydrazino-5-mercapto-1,2,4-triazole, was evaluated for the determination of formaldehyde in indoor environments. Chromatography paper cleaned using a 3% hydrogen peroxide solution was experimentally determined as being the optimum absorption filter for the collection of formaldehyde (0.05 microg cm(-2) formaldehyde). From a linear-regression analysis between the mass of formaldehyde time-collected on a passive air sampler and the formaldehyde concentration measured by an active sampler, the sampling rate of the passive air sampler was 1.52 L h(-1). The sampling rate, determined for the passive air sampler in relation to the temperature (19 - 28 degrees C) and the relative humidity (30 - 90%), were 1.56 +/- 0.04 and 1.58 +/- 0.07 L h(-1), respectively. The relationship between the sampling rate and the air velocity was a linear-regression within the observed range. In the case of exposed samplers, the stability of the collected formaldehyde decreased with increasing storage time (decrease of ca. 25% after 22 days); but with the unexposed samplers the stability of the blank remained relatively unchanged for 7 days (decrease of ca. 37% after 22 days). The detection limits for the passive air sampler with an exposure time of 1 day and 7 days were 10.4 and 1.48 microg m(-3), respectively.

  4. Idea Bank.

    ERIC Educational Resources Information Center

    Herlocker, Helen; And Others

    1988-01-01

    Provides information on motivational activities, demonstrations, experiments, software, lessons, field trips, and a game as ideas for instructional use. Includes topics on digestion in paramecium, diffusion, cells, interactive displays, slime molds, and the construction of an underwater viewing device. (RT)

  5. Vacuum probe surface sampler

    NASA Technical Reports Server (NTRS)

    Zahlava, B. A. (Inventor)

    1973-01-01

    A vacuum probe surface sampler is described for rapidly sampling relatively large surface areas which possess relatively light loading densities of micro-organism, drug particles or the like. A vacuum head with a hollow handle connected to a suitable vacuum source is frictionally attached to a cone assembly terminating in a flared tip adapted to be passed over the surface to be sampled. A fine mesh screen carried by the vacuum head provides support for a membrane filter which collects the microorganisms or other particles. The head assembly is easily removed from the cone assembly without contacting the cone assembly with human hands.

  6. Polyport atmospheric gas sampler

    DOEpatents

    Guggenheim, S. Frederic

    1995-01-01

    An atmospheric gas sampler with a multi-port valve which allows for multi, sequential sampling of air through a plurality of gas sampling tubes mounted in corresponding gas inlet ports. The gas sampler comprises a flow-through housing which defines a sampling chamber and includes a gas outlet port to accommodate a flow of gases through the housing. An apertured sample support plate defining the inlet ports extends across and encloses the sampling chamber and supports gas sampling tubes which depend into the sampling chamber and are secured across each of the inlet ports of the sample support plate in a flow-through relation to the flow of gases through the housing during sampling operations. A normally closed stopper means mounted on the sample support plate and operatively associated with each of the inlet ports blocks the flow of gases through the respective gas sampling tubes. A camming mechanism mounted on the sample support plate is adapted to rotate under and selectively lift open the stopper spring to accommodate a predetermined flow of gas through the respective gas sampling tubes when air is drawn from the housing through the outlet port.

  7. Improved high volume air sampler

    NASA Technical Reports Server (NTRS)

    King, R. B.

    1974-01-01

    Sampler permits size separations of particles by directing sampled air through cross-sectional area sufficiently large that air velocity is reduced to point where particles or larger size will settle out. Sampler conducts air downward and through slots around periphery of unit into relatively open interior of house.

  8. Preparation and Characterization of the Activated Carbon-Nylon Beads: Novel Material for In Situ Microbe Sampler and Microcosm Experiment in Groundwater Environment

    NASA Astrophysics Data System (ADS)

    Liu, J.; Liu, H.

    2015-12-01

    The organic pollution of groundwater is a widespread problem in the word. It is significant to study the microbial community especially related to organic contaminant biodegradation and their variation with groundwater environment parameters, so as to evaluate the biodegradability of the organic contaminants and then make a right decision for bioremediation. One of good ways for this study is to build a microcosm in groundwater containing target contaminant, where microbes especially relating to biodegradation will grow in the microcosm and be collected for analysis. This research aims to prepare a novel material for in situ microbe sampler and microcosm experiment in groundwater environment. The novel material, namely, the activated carbon-nylon (AC-N) beads, was prepared using activated carbon and nylon as main raw materials. The material consists of 3-4mm diameter spherical beads (Fig.1A and Fig.2 A) which have an internal surface area greater than 500 m2 g-1. FT-IR spectra (Fig.3) indicated the composition of activated carbon and nylon due to the variation of the peaks at the near 1627 cm-1and 1558 -1538 cm-1 before and after complex reaction. The equilibrium adsorption capacity of benzene on the beads was 16.76 mg/g at the initial concentration of 100 mg/L. The adsorption kinetics was found to follow the pseudo-second-order kinetic model (Fig.4). The mechanism of the adsorption process was determined from the intraparticle diffusion model. Camera and SEM images (Fig.1 B and Fig.2 A and B) showed that the beads had an open and channel pore structures, the microbes might enter into and grow up in the beads (Fig.1 C and Fig.2 C). All these results showed that the AC-N beads could form the in situ microcosm of organic pollutants and microbes, which provided a promising prospect for assessing the biodegradability of the organic pollutants by intrinsic microbes in the groundwater.

  9. Laser pulse sampler

    DOEpatents

    Vann, Charles

    1998-01-01

    The Laser Pulse Sampler (LPS) measures temporal pulse shape without the problems of a streak camera. Unlike the streak camera, the laser pulse directly illuminates a camera in the LPS, i.e., no additional equipment or energy conversions are required. The LPS has several advantages over streak cameras. The dynamic range of the LPS is limited only by the range of its camera, which for a cooled camera can be as high as 16 bits, i.e., 65,536. The LPS costs less because there are fewer components, and those components can be mass produced. The LPS is easier to calibrate and maintain because there is only one energy conversion, i.e., photons to electrons, in the camera.

  10. Parallel optical sampler

    DOEpatents

    Tauke-Pedretti, Anna; Skogen, Erik J; Vawter, Gregory A

    2014-05-20

    An optical sampler includes a first and second 1.times.n optical beam splitters splitting an input optical sampling signal and an optical analog input signal into n parallel channels, respectively, a plurality of optical delay elements providing n parallel delayed input optical sampling signals, n photodiodes converting the n parallel optical analog input signals into n respective electrical output signals, and n optical modulators modulating the input optical sampling signal or the optical analog input signal by the respective electrical output signals, and providing n successive optical samples of the optical analog input signal. A plurality of output photodiodes and eADCs convert the n successive optical samples to n successive digital samples. The optical modulator may be a photodiode interconnected Mach-Zehnder Modulator. A method of sampling the optical analog input signal is disclosed.

  11. Multispectral Resource Sampler Workshop

    NASA Technical Reports Server (NTRS)

    1979-01-01

    The utility of the multispectral resource sampler (MRS) was examined by users in the following disciplines: agriculture, atmospheric studies, engineering, forestry, geology, hydrology/oceanography, land use, and rangelands/soils. Modifications to the sensor design were recommended and the desired types of products and number of scenes required per month were indicated. The history, design, capabilities, and limitations of the MRS are discussed as well as the multilinear spectral array technology which it uses. Designed for small area inventory, the MRS can provide increased temporal, spectral, and spatial resolution, facilitate polarization measurement and atmospheric correction, and test onboard data compression techniques. The advantages of using it along with the thematic mapper are considered.

  12. Waveform Sampler CAMAC Module

    SciTech Connect

    Freytag, D.R.; Haller, G.M.; Kang, H.; Wang, J.

    1985-09-01

    A Waveform Sampler Module (WSM) for the measurement of signal shapes coming from the multi-hit drift chambers of the SLAC SLC detector is described. The module uses a high speed, high resolution analog storage device (AMU) developed in collaboration between SLAC and Stanford University. The AMU devices together with high speed TTL clocking circuitry are packaged in a hybrid which is also suitable for mounting on the detector. The module is in CAMAC format and provides eight signal channels, each recording signal amplitude versus time in 512 cells at a sampling rate of up to 360 MHz. Data are digitized by a 12-bit ADC with a 1 ..mu..s conversion time and stored in an on-board memory accessible through CAMAC.

  13. Differential atmospheric tritium sampler

    DOEpatents

    Griesbach, Otto A.; Stencel, Joseph R.

    1990-01-01

    An atmospheric tritium sampler is provided which uses a carrier gas comprised of hydrogen gas and a diluting gas, mixed in a nonexplosive concentration. Sample air and carrier gas are drawn into and mixed in a manifold. A regulator meters the carrier gas flow to the manifold. The air sample/carrier gas mixture is pulled through a first moisture trap which adsorbs water from the air sample. The mixture then passes through a combustion chamber where hydrogen gas in the form of H.sub.2 or HT is combusted into water. The manufactured water is transported by the air stream to a second moisture trap where it is adsorbed. The air is then discharged back into the atmosphere by means of a pump.

  14. Differential atmospheric tritium sampler

    DOEpatents

    Griesbach, O.A.; Stencel, J.R.

    1987-10-02

    An atmospheric tritium sampler is provided which uses a carrier gas comprised of hydrogen gas and a diluting gas, mixed in a nonexplosive concentration. Sample air and carrier gas are drawn into and mixed in a manifold. A regulator meters the carrier gas flow to the manifold. The air sample/carrier gas mixture is pulled through a first moisture trap which adsorbs water from the air sample. The moisture then passes through a combustion chamber where hydrogen gas in the form of H/sub 2/ or HT is combusted into water. The manufactured water is transported by the air stream to a second moisture trap where it is adsorbed. The air is then discharged back into the atmosphere by means of a pump.

  15. Laser pulse sampler

    DOEpatents

    Vann, C.

    1998-03-24

    The Laser Pulse Sampler (LPS) measures temporal pulse shape without the problems of a streak camera. Unlike the streak camera, the laser pulse directly illuminates a camera in the LPS, i.e., no additional equipment or energy conversions are required. The LPS has several advantages over streak cameras. The dynamic range of the LPS is limited only by the range of its camera, which for a cooled camera can be as high as 16 bits, i.e., 65,536. The LPS costs less because there are fewer components, and those components can be mass produced. The LPS is easier to calibrate and maintain because there is only one energy conversion, i.e., photons to electrons, in the camera. 5 figs.

  16. Automated particulate sampler field test model operations guide

    SciTech Connect

    Bowyer, S.M.; Miley, H.S.

    1996-10-01

    The Automated Particulate Sampler Field Test Model Operations Guide is a collection of documents which provides a complete picture of the Automated Particulate Sampler (APS) and the Field Test in which it was evaluated. The Pacific Northwest National Laboratory (PNNL) Automated Particulate Sampler was developed for the purpose of radionuclide particulate monitoring for use under the Comprehensive Test Ban Treaty (CTBT). Its design was directed by anticipated requirements of small size, low power consumption, low noise level, fully automatic operation, and most predominantly the sensitivity requirements of the Conference on Disarmament Working Paper 224 (CDWP224). This guide is intended to serve as both a reference document for the APS and to provide detailed instructions on how to operate the sampler. This document provides a complete description of the APS Field Test Model and all the activity related to its evaluation and progression.

  17. Idea Bank.

    ERIC Educational Resources Information Center

    Science Teacher, 1986

    1986-01-01

    Provides descriptions of activities and programs that have been successful with secondary science students. Includes ideas related to repairing radio-controlled cars, cooperative science-library center, observation exercises, recordkeeping skills and peer grading, DC power supply, chemistry of poison ivy, spore science, and a tic-tac-toe review…

  18. Trench Left By Sampler Scoop

    NASA Technical Reports Server (NTRS)

    1976-01-01

    A shallow 12-inch-long trench was dug by Viking 2 s surface sampler scoop yesterday (September 12) on Mars. The trench is difficult to see in this photo because it is in the shadow of a rock (out of view to the right). The sampler scoop stopped operating sometime after soil was excavated from the trench and delivered to Viking 2 s biology instrument.

  19. High speed sampler and demultiplexer

    DOEpatents

    McEwan, T.E.

    1995-12-26

    A high speed sampling demultiplexer based on a plurality of sampler banks, each bank comprising a sample transmission line for transmitting an input signal, a strobe transmission line for transmitting a strobe signal, and a plurality of sampling gates at respective positions along the sample transmission line for sampling the input signal in response to the strobe signal. Strobe control circuitry is coupled to the plurality of banks, and supplies a sequence of bank strobe signals to the strobe transmission lines in each of the plurality of banks, and includes circuits for controlling the timing of the bank strobe signals among the banks of samplers. Input circuitry is included for supplying the input signal to be sampled to the plurality of sample transmission lines in the respective banks. The strobe control circuitry can repetitively strobe the plurality of banks of samplers such that the banks of samplers are cycled to create a long sample length. Second tier demultiplexing circuitry is coupled to each of the samplers in the plurality of banks. The second tier demultiplexing circuitry senses the sample taken by the corresponding sampler each time the bank in which the sampler is found is strobed. A plurality of such samples can be stored by the second tier demultiplexing circuitry for later processing. Repetitive sampling with the high speed transient sampler induces an effect known as ``strobe kickout``. The sample transmission lines include structures which reduce strobe kickout to acceptable levels, generally 60 dB below the signal, by absorbing the kickout pulses before the next sampling repetition. 16 figs.

  20. High speed sampler and demultiplexer

    DOEpatents

    McEwan, Thomas E.

    1995-01-01

    A high speed sampling demultiplexer based on a plurality of sampler banks, each bank comprising a sample transmission line for transmitting an input signal, a strobe transmission line for transmitting a strobe signal, and a plurality of sampling gates at respective positions along the sample transmission line for sampling the input signal in response to the strobe signal. Strobe control circuitry is coupled to the plurality of banks, and supplies a sequence of bank strobe signals to the strobe transmission lines in each of the plurality of banks, and includes circuits for controlling the timing of the bank strobe signals among the banks of samplers. Input circuitry is included for supplying the input signal to be sampled to the plurality of sample transmission lines in the respective banks. The strobe control circuitry can repetitively strobe the plurality of banks of samplers such that the banks of samplers are cycled to create a long sample length. Second tier demultiplexing circuitry is coupled to each of the samplers in the plurality of banks. The second tier demultiplexing circuitry senses the sample taken by the corresponding sampler each time the bank in which the sampler is found is strobed. A plurality of such samples can be stored by the second tier demultiplexing circuitry for later processing. Repetitive sampling with the high speed transient sampler induces an effect known as "strobe kickout". The sample transmission lines include structures which reduce strobe kickout to acceptable levels, generally 60 dB below the signal, by absorbing the kickout pulses before the next sampling repetition.

  1. Teaching Ideas and Activities for Classroom: Integrating Technology into the Pedagogy of Integral Calculus and the Approximation of Definite Integrals

    ERIC Educational Resources Information Center

    Caglayan, Gunhan

    2016-01-01

    The purpose of this article is to offer teaching ideas in the treatment of the definite integral concept and the Riemann sums in a technology-supported environment. Specifically, the article offers teaching ideas and activities for classroom for the numerical methods of approximating a definite integral via left- and right-hand Riemann sums, along…

  2. Variable depth core sampler

    SciTech Connect

    Bourgeois, P.M.; Reger, R.J.

    1994-12-31

    This invention relates to a sampling means, more particularly to a device to sample hard surfaces at varying depths. Often it is desirable to take samples of a hard surface wherein the samples are of the same diameter but of varying depths. Current practice requires that a full top-to-bottom sample of the material be taken, using a hole saw, and boring a hole from one end of the material to the other. The sample thus taken is removed from the hole saw and the middle of said sample is then subjected to further investigation. This paper describes a variable depth core sampler comprimising a circular hole saw member, having longitudinal sections that collapse to form a point and capture a sample, and a second saw member residing inside the first hole saw member to support the longitudinal sections of the first member and prevent them from collapsing to form a point. The second hole saw member may be raised and lowered inside the the first hole saw member.

  3. Active Sampling Device for Determining Pollutants in Surface and Pore Water – the In Situ Sampler for Biphasic Water Monitoring

    NASA Astrophysics Data System (ADS)

    Supowit, Samuel D.; Roll, Isaac B.; Dang, Viet D.; Kroll, Kevin J.; Denslow, Nancy D.; Halden, Rolf U.

    2016-02-01

    We designed and evaluated an active sampling device, using as analytical targets a family of pesticides purported to contribute to honeybee colony collapse disorder. Simultaneous sampling of bulk water and pore water was accomplished using a low-flow, multi-channel pump to deliver water to an array of solid-phase extraction cartridges. Analytes were separated using either liquid or gas chromatography, and analysis was performed using tandem mass spectrometry (MS/MS). Achieved recoveries of fipronil and degradates in water spiked to nominal concentrations of 0.1, 1, and 10 ng/L ranged from 77 ± 12 to 110 ± 18%. Method detection limits (MDLs) were as low as 0.040–0.8 ng/L. Extraction and quantitation of total fiproles at a wastewater-receiving wetland yielded concentrations in surface water and pore water ranging from 9.9 ± 4.6 to 18.1 ± 4.6 ng/L and 9.1 ± 3.0 to 12.6 ± 2.1 ng/L, respectively. Detected concentrations were statistically indistinguishable from those determined by conventional, more laborious techniques (p > 0.2 for the three most abundant fiproles). Aside from offering time-averaged sampling capabilities for two phases simultaneously with picogram-per-liter MDLs, the novel methodology eliminates the need for water and sediment transport via in situ solid phase extraction.

  4. Active Sampling Device for Determining Pollutants in Surface and Pore Water – the In Situ Sampler for Biphasic Water Monitoring

    PubMed Central

    Supowit, Samuel D.; Roll, Isaac B.; Dang, Viet D.; Kroll, Kevin J.; Denslow, Nancy D.; Halden, Rolf U.

    2016-01-01

    We designed and evaluated an active sampling device, using as analytical targets a family of pesticides purported to contribute to honeybee colony collapse disorder. Simultaneous sampling of bulk water and pore water was accomplished using a low-flow, multi-channel pump to deliver water to an array of solid-phase extraction cartridges. Analytes were separated using either liquid or gas chromatography, and analysis was performed using tandem mass spectrometry (MS/MS). Achieved recoveries of fipronil and degradates in water spiked to nominal concentrations of 0.1, 1, and 10 ng/L ranged from 77 ± 12 to 110 ± 18%. Method detection limits (MDLs) were as low as 0.040–0.8 ng/L. Extraction and quantitation of total fiproles at a wastewater-receiving wetland yielded concentrations in surface water and pore water ranging from 9.9 ± 4.6 to 18.1 ± 4.6 ng/L and 9.1 ± 3.0 to 12.6 ± 2.1 ng/L, respectively. Detected concentrations were statistically indistinguishable from those determined by conventional, more laborious techniques (p > 0.2 for the three most abundant fiproles). Aside from offering time-averaged sampling capabilities for two phases simultaneously with picogram-per-liter MDLs, the novel methodology eliminates the need for water and sediment transport via in situ solid phase extraction. PMID:26905924

  5. Pesticide monitoring in surface water and groundwater using passive samplers

    NASA Astrophysics Data System (ADS)

    Kodes, V.; Grabic, R.

    2009-04-01

    Passive samplers as screening devices have been used within a czech national water quality monitoring network since 2002 (SPMD and DGT samplers for non polar substances and metals). The passive sampler monitoring of surface water was extended to polar substances, in 2005. Pesticide and pharmaceutical POCIS samplers have been exposed in surface water at 21 locations and analysed for polar pesticides, perfluorinated compounds, personal care products and pharmaceuticals. Pesticide POCIS samplers in groundwater were exposed at 5 locations and analysed for polar pesticides. The following active substances of plant protection products were analyzed in surface water and groundwater using LC/MS/MS: 2,4,5-T, 2,4-D, Acetochlor, Alachlor, Atrazine, Atrazine_desethyl, Azoxystrobin, Bentazone, Bromacil, Bromoxynil, Carbofuran, Clopyralid, Cyanazin, Desmetryn, Diazinon, Dicamba, Dichlobenil, Dichlorprop, Dimethoat, Diuron, Ethofumesate, Fenarimol, Fenhexamid, Fipronil, Fluazifop-p-butyl, Hexazinone, Chlorbromuron, Chlorotoluron, Imazethapyr, Isoproturon, Kresoxim-methyl, Linuron, MCPA, MCPP, Metalaxyl, Metamitron, Methabenzthiazuron, Methamidophos, Methidathion, Metobromuron, Metolachlor, Metoxuron, Metribuzin, Monolinuron, Nicosulfuron, Phorate, Phosalone, Phosphamidon, Prometryn, Propiconazole, Propyzamide, Pyridate, Rimsulfuron, Simazine, Tebuconazole, Terbuthylazine, Terbutryn, Thifensulfuron-methyl, Thiophanate-methyl and Tri-allate. The POCIS samplers performed very well being able to provide better picture than grab samples. The results show that polar pesticides and also perfluorinated compounds, personal care products and pharmaceuticals as well occur in hydrosphere of the Czech republic. Acknowledgment: Authors acknowledge the financial support of grant No. 2B06095 by the Ministry of Education, Youth and Sports.

  6. Strategies for Improving Language across the Curriculum: Ideas and Activities for Every Classroom. Series of Caribbean Volunteer Publications, No. 14.

    ERIC Educational Resources Information Center

    Voluntary Services Overseas, Castries (St. Lucia).

    This book contains 50 hands-on activities representing most subjects taught at the secondary school level in the Caribbean. It lists the order of activities by chapter and name of each activity in the general table of contents. The first chapter, Investigating and Organizing Ideas, presents six activities and discusses semantic mapping, mind maps,…

  7. Creative constraints: Brain activity and network dynamics underlying semantic interference during idea production.

    PubMed

    Beaty, Roger E; Christensen, Alexander P; Benedek, Mathias; Silvia, Paul J; Schacter, Daniel L

    2017-03-01

    Functional neuroimaging research has recently revealed brain network interactions during performance on creative thinking tasks-particularly among regions of the default and executive control networks-but the cognitive mechanisms related to these interactions remain poorly understood. Here we test the hypothesis that the executive control network can interact with the default network to inhibit salient conceptual knowledge (i.e., pre-potent responses) elicited from memory during creative idea production. Participants studied common noun-verb pairs and were given a cued-recall test with corrective feedback to strengthen the paired association in memory. They then completed a verb generation task that presented either a previously studied noun (high-constraint) or an unstudied noun (low-constraint), and were asked to "think creatively" while searching for a novel verb to relate to the presented noun. Latent Semantic Analysis of verbal responses showed decreased semantic distance values in the high-constraint (i.e., interference) condition, which corresponded to increased neural activity within regions of the default (posterior cingulate cortex and bilateral angular gyri), salience (right anterior insula), and executive control (left dorsolateral prefrontal cortex) networks. Independent component analysis of intrinsic functional connectivity networks extended this finding by revealing differential interactions among these large-scale networks across the task conditions. The results suggest that interactions between the default and executive control networks underlie response inhibition during constrained idea production, providing insight into specific neurocognitive mechanisms supporting creative cognition.

  8. A High Volume Stack Sampler

    NASA Technical Reports Server (NTRS)

    Boubel, Richard W.

    1971-01-01

    The stack sampler described in this paper has been developed to overcome the difficulties of particulate sampling with presently available equipment. Its use on emissions from hog fuel fired boilers, back-fired incinerators, wigwam burners, asphalt plants, and seed cleaning cyclones is reported. The results indicate that the sampler is rapid and reliable in its use. It is relatively simple and inexpensive to operate. For most sources it should be considered over the more complicated and expensive sampling trains being used and specified.

  9. Solid-Sorbent Air Sampler

    NASA Technical Reports Server (NTRS)

    Galen, T. J.

    1986-01-01

    Portable unit takes eight 24-hour samples. Volatile organic compounds in air collected for analysis by portable, self-contained sampling apparatus. Sampled air drawn through sorbent material, commercial porous polymer of 2, 3-diphenyl-p-phenylene oxide. High-boiling-point organic compounds adsorbed onto polymer, while low-boiling-point organics pass through and returned to atmosphere. Sampler includes eight sample tubes filled with polymeric sorbent. Organic compounds in atmosphere absorbed when air pumped through sorbent. Designed for checking air in spacecraft, sampler adaptable to other applications as leak detection, gas-mixture analysis, and ambient-air monitoring.

  10. An operation manual for a time-series, storm-activated suspended sediment sampler deployed in the coastal ocean: function, maintenance, and testing procedures

    USGS Publications Warehouse

    Rendigs, Richard R.; Bothner, Michael H.

    2004-01-01

    This manual describes the operation and testing procedures for two models of a multi-port suspended sediment sampler that are moored in the coastal ocean and that collect samples on a programmable time schedule that can be interrupted to collect during a storm. The ability to sense and collect samples before, during, and after the height of a storm is a unique feature of these instruments because it provides samples during conditions when it is difficult or impossible to sample from a surface ship. The sensors used to trigger storm sampling are a transmissometer or a pressure sensor. The purpose of such samples is to assess composition and concentration of sediment resuspended from the seafloor during storms and subsequently transported within the coastal system. Both light transmission and the standard deviation of pressure from surface waves correlate with the passage of major storms. The instruments successfully identified the onset of storms and collected samples before, during, and after the storm maximum as programmed. The accuracy of determining suspended matter concentrations collected by the sediment sampler has not been fully evaluated. Preliminary laboratory tests using a suspension of muddy sediment collected in a near-bottom sediment trap yielded excellent results. However in laboratory tests with different sediment types, the suspended matter concentrations determined with these samplers became less accurate with increasing average grain size. Future calibration work is necessary and should be conducted in a facility that ideally has a water depth of at least 30 feet to prevent cavitation of the pump that draws sea water through the filters. The test facility should also have the capability for adding suspended matter of known composition and concentration to a fixed volume of seawater that is well mixed.

  11. A modified siphon sampler for shallow water

    USGS Publications Warehouse

    Diehl, Timothy H.

    2008-01-01

    A modified siphon sampler (or 'single-stage sampler') was developed to sample shallow water at closely spaced vertical intervals. The modified design uses horizontal rather than vertical sample bottles. Previous siphon samplers are limited to water about 20 centimeters (cm) or more in depth; the modified design can sample water 10 cm deep. Several mounting options were used to deploy the modified siphon sampler in shallow bedrock streams of Middle Tennessee, while minimizing alteration of the stream bed. Sampling characteristics and limitations of the modified design are similar to those of the original design. Testing showed that the modified sampler collects unbiased samples of suspended silt and clay. Similarity of the intake to the original siphon sampler suggests that the modified sampler would probably take downward-biased samples of suspended sand. Like other siphon samplers, it does not sample isokinetically, and the efficiency of sand sampling can be expected to change with flow velocity. The sampler needs to be located in the main flow of the stream, and is subject to damage from rapid flow and floating debris. Water traps were added to the air vents to detect the flow of water through the sampler, which can cause a strong upward bias in sampled suspended-sediment concentration. Water did flow through the sampler, in some cases even when the top of the air vent remained above water. Air vents need to be extended well above maximum water level to prevent flow through the sampler.

  12. A Sampler of Ethnic Crafts.

    ERIC Educational Resources Information Center

    Donley, Susan K.; And Others

    This curriculum guide provides a sampler of the wide variety of expression practiced by cultural groups all over the world. The guide was developed to help fill the need for multicultural art resources that are respectful of both modern art education philosophy and of authentic, sensitive representation of other cultures. The types of materials…

  13. Field calibration of polyurethane foam (PUF) disk passive air samplers for PCBs and OC pesticides.

    PubMed

    Chaemfa, Chakra; Barber, Jonathan L; Gocht, Tilman; Harner, Tom; Holoubek, Ivan; Klanova, Jana; Jones, Kevin C

    2008-12-01

    Different passive air sampler (PAS) strategies have been developed for sampling in remote areas and for cost-effective simultaneous spatial mapping of POPs (persistent organic pollutants) over differing geographical scales. The polyurethane foam (PUF) disk-based PAS is probably the most widely used. In a PUF-based PAS, the PUF disk is generally mounted inside two stainless steel bowls to buffer the air flow to the disk and to shield it from precipitation and light. The field study described in this manuscript was conducted to: compare performance of 3 different designs of sampler; to further calibrate the sampler against the conventional active sampler; to derive more information on field-based uptake rates and equilibrium times of the samplers. Samplers were also deployed at different locations across the field site, and at different heights up a meteorological tower, to investigate the possible influence of sampler location. Samplers deployed <5m above ground, and not directly sheltered from the wind gave similar uptake rates. Small differences in dimensions between the 3 designs of passive sampler chamber had no discernable effect on accumulation rates, allowing comparison with previously published data.

  14. Calibration of the Ogawa passive ozone sampler for aircraft cabins

    NASA Astrophysics Data System (ADS)

    Bhangar, Seema; Singer, Brett C.; Nazaroff, William W.

    2013-02-01

    Elevated ozone levels in aircraft cabins would pose a health hazard to exposed passengers and crew. The Ogawa passive sampler is a potentially useful tool for measuring in-cabin ozone levels. Accurate interpretation of measured values requires knowing the effective collection rate of the sampler. To calibrate the passive sampler for the aircraft-cabin environment, ozone was measured simultaneously with an Ogawa sampler and an active ozone analyzer that served as a transfer standard, on 11 commercial passenger flights, during Feb-Apr 2007. An empirical pressure-independent effective collection rate that can be used to convert nitrate mass to ozone mixing ratio was determined to be 14.3 ± 0.9 atm cm3 min-1 (mean ± standard error). This value is similar to estimates from other applications where airflow rates are low, such as in personal monitoring and in chamber studies. This study represents the first field calibration of any passive sampler for the aircraft cabin environment.

  15. Ideas Exchange: Physical Education as a Dynamic Content Area Should Motivate Students to Be Physically Active. What New Ideas Can You Suggest to Kick Off the New School Year and Get Everyone "Moving" in the Right Direction?

    ERIC Educational Resources Information Center

    Chase, Melissa A.; Wright, James; Magnotta, John; Goldberg, Mark; Muller, Barbara; Reitz, Adam; Zavatto, Laura; Christenson, Bob; Winiecki, Tom; Beardsley, Rita; Connors, Shelly; Robelee, Margaret E.; Gosset, Michael; Mavrek, Srecko

    2010-01-01

    Physical education as a dynamic content area should motivate students to be physically active. In this article, readers suggest new ideas to kick off the new school year and get everyone "moving" in the right direction.

  16. Ideas Exchange: Should Students Be Granted a Waiver from Physical Education if They Are Involved in Other Activities?

    ERIC Educational Resources Information Center

    Sipe, Roberta; Belka, David; Kamla, Jim; Christenson, Robert S.; Magnotta, John; Lorenzi, David G.

    2009-01-01

    This article presents the opinions/ideas of professionals who were asked this question: "Should students be granted a waiver from physical education if they are involved in other activities?" These professionals share the pros and cons of the waiver question.

  17. Releasable Asbestos Field Sampler

    EPA Science Inventory

    Asbestos aerosolization (or releasability) is the potential for fibrous asbestos structures that are present in a material or on a solid surface to become airborne when the source is disturbed by human activities or natural forces. In turn, the magnitude of the airborne concentra...

  18. Silicone Wristbands as Personal Passive Samplers

    PubMed Central

    2014-01-01

    Active-sampling approaches are commonly used for personal monitoring, but are limited by energy usage and data that may not represent an individual’s exposure or bioavailable concentrations. Current passive techniques often involve extensive preparation, or are developed for only a small number of targeted compounds. In this work, we present a novel application for measuring bioavailable exposure with silicone wristbands as personal passive samplers. Laboratory methodology affecting precleaning, infusion, and extraction were developed from commercially available silicone, and chromatographic background interference was reduced after solvent cleanup with good extraction efficiency (>96%). After finalizing laboratory methods, 49 compounds were sequestered during an ambient deployment which encompassed a diverse set of compounds including polycyclic aromatic hydrocarbons (PAHs), consumer products, personal care products, pesticides, phthalates, and other industrial compounds ranging in log Kow from −0.07 (caffeine) to 9.49 (tris(2-ethylhexyl) phosphate). In two hot asphalt occupational settings, silicone personal samplers sequestered 25 PAHs during 8- and 40-h exposures, as well as 2 oxygenated-PAHs (benzofluorenone and fluorenone) suggesting temporal sensitivity over a single work day or week (p < 0.05, power =0.85). Additionally, the amount of PAH sequestered differed between worksites (p < 0.05, power = 0.99), suggesting spatial sensitivity using this novel application. PMID:24548134

  19. Silicone wristbands as personal passive samplers.

    PubMed

    O'Connell, Steven G; Kincl, Laurel D; Anderson, Kim A

    2014-03-18

    Active-sampling approaches are commonly used for personal monitoring, but are limited by energy usage and data that may not represent an individual's exposure or bioavailable concentrations. Current passive techniques often involve extensive preparation, or are developed for only a small number of targeted compounds. In this work, we present a novel application for measuring bioavailable exposure with silicone wristbands as personal passive samplers. Laboratory methodology affecting precleaning, infusion, and extraction were developed from commercially available silicone, and chromatographic background interference was reduced after solvent cleanup with good extraction efficiency (>96%). After finalizing laboratory methods, 49 compounds were sequestered during an ambient deployment which encompassed a diverse set of compounds including polycyclic aromatic hydrocarbons (PAHs), consumer products, personal care products, pesticides, phthalates, and other industrial compounds ranging in log K(ow) from -0.07 (caffeine) to 9.49 (tris(2-ethylhexyl) phosphate). In two hot asphalt occupational settings, silicone personal samplers sequestered 25 PAHs during 8- and 40-h exposures, as well as 2 oxygenated-PAHs (benzofluorenone and fluorenone) suggesting temporal sensitivity over a single work day or week (p < 0.05, power =0.85). Additionally, the amount of PAH sequestered differed between worksites (p < 0.05, power = 0.99), suggesting spatial sensitivity using this novel application.

  20. Application of the personal aeroallergen sampler to assess personal exposures to Japanese cedar and cypress pollens.

    PubMed

    Yamamoto, Naomichi; Matsuki, Hideaki; Yanagisawa, Yukio

    2007-11-01

    We have recently developed the Personal Aeroallergen Sampler (PAAS), a passive sampler for aeroallergens. In the present study, the applicability of the PAAS for personal exposure assessments of cedar and cypress pollens was investigated by comparing with existing reference samplers. To investigate the usability of the PAAS as a personal sampler for the airborne pollens, it was compared with the Institute of Occupational Medicine (IOM) sampler, a traditionally used active personal sampler. Overall, the result showed a good correlation between the two methods, that is, R(2)=0.8082, suggesting the usability of the PAAS for the personal pollen samplings. The ratio of the pollen numbers collected by the PAAS to the IOM sampler was approximately 30%, which was consistent with our previous study investigating ambient dust particles. Meanwhile, the comparability of the PAAS to the Durham sampler, the most widely used stationary pollen trap, was also assured. Furthermore, we exemplified the seasonal peak of the personal pollen exposures was not necessarily reflected by the outdoor concentrations, indicating insufficiency of the stationary outdoor monitoring to represent the personal pollen exposures. The PAAS, a simple passive method, could be used in future field studies to elucidate the detailed mechanisms of allergic airway diseases such as cedar pollinosis.

  1. Hydrazine-Vapor Samplers

    NASA Technical Reports Server (NTRS)

    Young, Rebecca; Mcbrearty, Charles; Curran, Dan; Leavitt, Nilgun

    1994-01-01

    Active sampling unit capable of detecting hydrazine and monomethyl hydrazine vapors at levels as low as 10 ppb in air developed. Includes detachable badge holder and pump which draws air through badge holder at selectable rate of 1 or 2 L/min. Coated strip in each badge designed to align with air passage in badge holder. Two types of badge holders constructed: one has open-face design for general monitoring of air in open spaces, while other has closed-face design with viewing window and intended for sampling through small openings to detect leaks.

  2. Opening the Creative Mind of High Need for Cognitive Closure Individuals through Activation of Uncreative Ideas

    ERIC Educational Resources Information Center

    Ong, Lay See; Leung, Angela K.-Y.

    2013-01-01

    Drawing on the integrative system theory of creativity combining the person, process, and press perspectives, this research offers the first evidence of how high-need-for-cognitive-closure (NFC) individuals' creative mind can be opened up, by making them become more cognizant of uncreative ideas as consensually invalid solutions to creative…

  3. Activities Ideas Definition Strategies (AIDS). Learning Disabilities: A Book of Resources for the Classroom Teacher.

    ERIC Educational Resources Information Center

    Barkin, Barbara; And Others

    Intended for regular classroom teachers with learning disabled children in their classes, the manual provides information and/or teaching ideas in 34 areas. Most sections are organized into three parts--examples of student behaviors, a discussion, and suggestions. Individual sections deal with the following areas: allergy, associative…

  4. The nursing research idea fair: fostering research interest and activity among nurses.

    PubMed

    Turjanica, Mary Ann; Turner, Barbra; Rodgers, Karen

    2013-01-01

    Educators need creative means to enhance nurses' understanding of the research process. The Nursing Research Idea Fair provides a multifaceted educational experience to stimulate interest in research, educate nurses about research, and engage nurses in the research process in a fun, nonintimidating way. Nurse-driven research studies have increased fourfold since implementing the fair.

  5. Demonstration/Validation of the Snap Sampler

    DTIC Science & Technology

    2011-06-01

    low-flow sampling. 5. Carefully selecting a sampling order that reduces sampler impacts on subsequent sam- pling events. 5.1.2 Baseline...flow sampling.  Carefully selecting a sampling order that reduces sampler impacts on subsequent sam- pling events. 5.2.2 Baseline Characterization...ER D C/ CR R EL T R -1 1 -1 1 Project ER-063 Demonstration/Validation of the Snap Sampler Cost and Performance: Final Report C ol d R eg

  6. Some Ideas about Idea Processors.

    ERIC Educational Resources Information Center

    Dobrin, David N.

    Idea processors are computer programs that can aid the user in creating outlines by allowing the user to move, reorder, renumber, expand upon, or delete entries with a push of a button. The question is whether these programs are useful and should be offered to students. Theoretically, an idea processor prioritizes ideas by placing them in a…

  7. SAVANNAH RIVER SITE TANK 18 AND TANK 19 WALL SAMPLER PERFORMANCE

    SciTech Connect

    Leishear, R.; Thaxton, D.; Minichan, R.; France, T.; Steeper, T.; Corbett, J.; Martin, B.; Vetsch, B.

    2009-12-19

    A sampling tool was required to evaluate residual activity ({mu}Curies per square foot) on the inner wall surfaces of underground nuclear waste storage tanks. The tool was required to collect a small sample from the 3/8 inch thick tank walls. This paper documents the design, testing, and deployment of the remotely operated sampling device. The sampler provides material from a known surface area to estimate the overall surface contamination in the tank prior to closure. The sampler consisted of a sampler and mast assembly mast assembly, control system, and the sampler, or end effector, which is defined as the operating component of a robotic arm. The mast assembly consisted of a vertical 30 feet long, 3 inch by 3 inch, vertical steel mast and a cantilevered arm hinged at the bottom of the mast and lowered by cable to align the attached sampler to the wall. The sampler and mast assembly were raised and lowered through an opening in the tank tops, called a riser. The sampler is constructed of a mounting plate, a drill, springs to provide a drive force to the drill, a removable sampler head to collect the sample, a vacuum pump to draw the sample from the drill to a filter, and controls to operate the system. Once the sampler was positioned near the wall, electromagnets attached it to the wall, and the control system was operated to turn on the drill and vacuum to remove and collect a sample from the wall. Samples were collected on filters in removable sampler heads, which were readily transported for further laboratory testing.

  8. Idea Bank.

    ERIC Educational Resources Information Center

    Talesnick, Irwin, Ed.

    1984-01-01

    Provides innovative ideas in biology, chemistry, and physics on the following topics: enzyme decomposition; chemical waste; time measurement; acid-base color magic; ball bouncing properties; heat; cell theory; and specimen boxes. Materials and procedures are listed when appropriate along with hints for expanding these ideas and investigations. (JM)

  9. Staffing Ideas.

    ERIC Educational Resources Information Center

    Child Care Information Exchange, 1987

    1987-01-01

    Presents business organization and child care center managers with ideas on how to deal with various staffing situations. Ideas include suggestions for handling informal staff networks; getting insight into what is important to people; motivating people in difficult situations; developing temporary employee services for child caregivers; and…

  10. Leadership Ideas.

    ERIC Educational Resources Information Center

    Child Care Information Exchange, 1987

    1987-01-01

    Provides day care center directors with relevant ideas for working with staff. Ideas include building "team spirit" among staff members; effective listening; gaining respect from staff members through effective decision-making skills; recognizing and correcting administrative errors; and effective group management techniques. (Author/BB)

  11. Quantitative organic vapor-particle sampler

    DOEpatents

    Gundel, Lara; Daisey, Joan M.; Stevens, Robert K.

    1998-01-01

    A quantitative organic vapor-particle sampler for sampling semi-volatile organic gases and particulate components. A semi-volatile organic reversible gas sorbent macroreticular resin agglomerates of randomly packed microspheres with the continuous porous structure of particles ranging in size between 0.05-10 .mu.m for use in an integrated diffusion vapor-particle sampler.

  12. 7 CFR 29.20 - Sampler.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Sampler. 29.20 Section 29.20 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... INSPECTION Regulations Definitions § 29.20 Sampler. Person employed, licensed, or authorized by the...

  13. A lightweight, high output soil sampler

    NASA Technical Reports Server (NTRS)

    Howard, E. A.; Imus, R. E.; Stockwell, D. W.

    1971-01-01

    Sampler is useful on or under earth's surface or on sea bottom. Larger sample amount is obtained relative to sampler size and weight and limited particle size sample material is continuously delivered. Silicone rubber linear in transport tube nearly eliminates grinding or particulate processing during sampling, and reduces required torque.

  14. Influence of meteorological factors on the atmospheric mercury measurement by a novel passive sampler

    NASA Astrophysics Data System (ADS)

    Guo, Haoli; Lin, Huiming; Zhang, Wei; Deng, Chunyan; Wang, Huanhuan; Zhang, Qianggong; Shen, Yating; Wang, Xuejun

    2014-11-01

    In recent years, an incentive for developing simple and cost-effective samplers that are capable of monitoring over an extended period and require nonattendance at remote locations was obvious. Compared to traditional active sampling approaches, passive samplers require no electric power and are more flexible in field deployment, thus they are more appropriate for screening applications and long-term sampling. However, the performance of passive samplers may be influenced by meteorological factors, therefore inducing bias for the result of passive sampling. In this study, the effects of temperature, relative humidity, and wind speed on the performance of a novel passive sampler for gaseous mercury were investigated. The meteorological factors were well controlled in an exposure chamber. The passive samplers were tested in different conditions: temperature ranging from -10 to 35 °C, relative humidity ranging from 25 to 90%, wind speed ranging from 0.5 to 5.0 m s-1. The results showed that temperature and relative humidity had no significant influence on the performance of the passive sampler. However, wind speed was found to have significant impact on the sampling rate of the passive sampler. Wind correction should be considered when making comparisons among samplings with different average wind speeds. In the field application in Beijing and Tibet site, the passively measured data were well correlated with the active measurements.

  15. Performance evaluation of two personal bioaerosol samplers.

    PubMed

    Tolchinsky, Alexander D; Sigaev, Vladimir I; Varfolomeev, Alexander N; Uspenskaya, Svetlana N; Cheng, Yung S; Su, Wei-Chung

    2011-01-01

    In this study, the performance of two newly developed personal bioaerosol samplers for monitoring the level of environmental and occupational airborne microorganisms was evaluated. These new personal bioaerosol samplers were designed based on a swirling cyclone with recirculating liquid film. The performance evaluation included collection efficiency tests using inert aerosols, the bioaerosol survival test using viable airborne microorganism, and the evaluation of using non-aqueous collection liquid for long-period sampling. The test results showed that these two newly developed personal bioaerosol samplers are capable of doing high efficiency, aerosol sampling (the cutoff diameters are around 0.7 μm for both samplers), and have proven to provide acceptable survival for the collected bioaerosols. By using an appropriate non-aqueous collection liquid, these two personal bioaerosol samplers should be able to permit continuous, long-period bioaerosol sampling with considerable viability for the captured bioaerosols.

  16. Inverse Problem Optimization Method to Design Passive Samplers for Volatile Organic Compounds: Principle and Application.

    PubMed

    Cao, Jianping; Du, Zhengjian; Mo, Jinhan; Li, Xinxiao; Xu, Qiujian; Zhang, Yinping

    2016-12-20

    Passive sampling is an alternative to active sampling for measuring concentrations of gas-phase volatile organic compounds (VOCs). However, the uncertainty or relative error of the measurements have not been minimized due to the limitations of existing design methods. In this paper, we have developed a novel method, the inverse problem optimization method, to address the problems associated with designing accurate passive samplers. The principle is to determine the most appropriate physical properties of the materials, and the optimal geometry of a passive sampler, by minimizing the relative sampling error based on the mass transfer model of VOCs for a passive sampler. As an example application, we used our proposed method to optimize radial passive samplers for the sampling of benzene and formaldehyde in a normal indoor environment. A new passive sampler, which we have called the Tsinghua Passive Diffusive Sampler (THPDS), for indoor benzene measurement was developed according to the optimized results. Silica zeolite was selected as the sorbent for the THPDS. The measured overall uncertainty of THPDS (22% for benzene) is lower than that of most commercially available passive samplers but is quite a bit larger than the modeled uncertainty (4.8% for benzene, the optimized result), suggesting that further research is required.

  17. Ideas: Recycling.

    ERIC Educational Resources Information Center

    Chessin, Debby A.; And Others

    1994-01-01

    Presents classroom ideas focusing on connections among mathematics, concern for the environment, and conservation of natural resources, including decomposition, water conservation, packaging materials, use of manufactured cans, and recycling. Includes reproducible student worksheets. (MKR)

  18. Active Learning Strategies in Face-to-Face Courses. IDEA Paper #53

    ERIC Educational Resources Information Center

    Millis, Barbara J.

    2012-01-01

    As numerous research studies suggest, teachers who desire increased student learning should adopt active learning. This article explores the research, defines active learning, discusses its value, offers suggestions for implementing it, and provides six concrete examples of active learning approaches: Thinking-Aloud Pair Problem-Solving;…

  19. Sharing Teaching Ideas.

    ERIC Educational Resources Information Center

    Mathematics Teacher, 1982

    1982-01-01

    The first idea presented is an activity aimed at teaching students to reduce a fraction to lowest terms by looking for the greatest common factor (GCF) of the numerator and denominator. The second idea looks at ways to construct solution problems that are challenging but which do not bog pupils down. (MP)

  20. Probabilistic Algorithm for Sampler Siting (PASS)

    SciTech Connect

    Lorenzetti, David M.; Sohn, Michael D.

    2007-05-29

    PASS (Probabilistic Approach to Sampler Siting) optimizes the placement of samplers in buildings. The program exhaustively checks every sampler-network that can be formed, evaluating against user-supplied simulations of the possible release scenarios. The program identifies the networks that maximize the probablity of detecting a release from among the suite of user-supllied scenarios. The user may specify how many networks to report, in order to provide a number of choices in cases where many networks have very similar behavior.

  1. Idea Organization and Idea Recall.

    DTIC Science & Technology

    1982-11-01

    Flower & Hayes). Subjects generated ideas relevant to a specific topic on Day 1. Then they organized their ideas and wrote a coherent text on the...change, after generation as a result of the qrganizational processes involved in writing. Flower and Hayes (1979) have developed an analysis of writing...arranging goals or particular aspects of the topic to be discussed. These goals have subgoals or subtopics and supporting arguments. Flower and Hayes

  2. Homesteading: The Free Land Idea. An Activity Guide for Teachers Grades 4 through 6.

    ERIC Educational Resources Information Center

    Lamberson, Wesley; Lange, L. S.; Sutter, Jason; Sutter, Gail

    This curriculum/activity guide is designed for use by teachers and other educators who live within trip distance of Homestead National Monument of America in Nebraska. However, some activities in the guide are designed for the classroom, and some are more effective if they are conducted outdoors; but many can be completed at school. The activity…

  3. Development of the releasable asbestos field sampler.

    PubMed

    Kominsky, John R; Thornburg, Jonathan W; Shaul, Glenn M; Barrett, William M; Hall, Fred D; Konz, James J

    2010-03-01

    The releasable asbestos field sampler (RAFS) was developed as an alternative to activity-based sampling (ABS; personal breathing zone sampling during a simulated activity). The RAFS utilizes a raking motion to provide the energy that releases particulate material from the soil and aerosolizes the asbestos fibers. A gentle airflow laterally transports the generated aerosol inside of a tunnel to one end where filter sampling cassettes or real-time instruments are used to measure asbestos and particulate release. The RAFS was tested in a series of laboratory experiments to validate its performance and then was deployed for field trials in asbestos-contaminated soil at multiple geographical locations. Laboratory data showed the RAFS generated repeatable and representative aerosol particulate concentrations. Field tests showed the RAFS aerosolized asbestos concentrations were statistically correlated with total particle concentrations. Field tests also showed the RAFS aerosolized asbestos concentrations were statistically correlated with asbestos concentrations measured by multiple ABS tests with different activities, different soil/environmental conditions, and at different geographical locations. RAFS provides a direct measurement of asbestos emission from soil in situ without consideration of meteorology and personal activity on the asbestos transport to the breathing zone.

  4. A passive sampler for atmospheric ozone

    SciTech Connect

    Grosjean, D.; Hisham, M.W.M. )

    1992-02-01

    A simple, cost-effective passive sampler has been developed for the determination of atmospheric ozone. This passive sampler is based on a colorant which fades upon reaction with ozone, whose concentration can be determined by reflectance measurement of the color change. Direct, on-site measurements are possible, and no chemical analyses are needed. Sampler design and validation studies have been carried out and included quantitative determination of color change vs exposure time (1-8 days), color change vs. ozone concentration (30-350 ppb), and response to changes in sampler configuration that modify the passive sampling rate. With indigo carmine as the colorant, the detection limits are 30 ppb. day and 120 ppb. day using a plastic grid and Teflon filter, respectively, as diffusion barriers. Interferences from nitrogen dioxide, formaldehyde and peroxyacetyl nitrate are 15, 4 and 16%, respectively, thus resulting in a negligible bias when measuring ozone in ambient air.

  5. Breakthrough Ideas.

    ERIC Educational Resources Information Center

    American School & University, 1996

    1996-01-01

    Describes innovative strategies that schools and universities are using to save money and reshape operations. Focuses on ideas in energy efficiency and facilities improvement, direct purchasing, energy management, retrofitting buildings, ceiling insulation upgrades, automation systems, electric demand programs, facilities programs, warranty…

  6. Dry idea

    NASA Astrophysics Data System (ADS)

    Carlowicz, Michael

    A century before the federal government established a council for “sustainable development,” John Wesley Powell was touting the idea as way to tame the American West. Powell's quiver of intellectual tools included one that modern environmentalists swear by: integrated assessment.

  7. Bright Ideas.

    ERIC Educational Resources Information Center

    Armstrong, Phil

    1999-01-01

    Discusses how to upgrade lighting technology in schools to reduce energy consumption and cut operating costs. Explores fixture efficiency using ballast and lamp upgrades and compact fluorescent lights. Other ideas include changing exit signs to ones that use less wattage, improving luminary efficiency through use of reflectors and shielding…

  8. Teaching Ideas.

    ERIC Educational Resources Information Center

    Middleton, Kathleen, Ed.

    1979-01-01

    Ideas to aid the classroom teacher include integration of emphasis on reading into health education; definitions pertinent to contemporary health education; teaching students to read food labels; identification of implications of scientific advances such as test tube reproduction; and a card game to teach food groups to middle school children.…

  9. Idea Bank.

    ERIC Educational Resources Information Center

    Science Teacher, 1993

    1993-01-01

    Presents a series of science teaching ideas with the following titles: When Demonstrations Are Misleading, Lasers and Refraction, An Improved Stair-Step Model, Correcting Your Compass, Seeing Is Not Believing, Food Coloring: From the Kitchen to the Lab, Punny Business, Portfolios in Science, Feathers or Gold: A Case for Using the Metric System,…

  10. Evaluation of a novel personal nanoparticle sampler.

    PubMed

    Zhou, Yue; Irshad, Hammad; Tsai, Chuen-Jinn; Hung, Shao-Ming; Cheng, Yung-Sung

    2014-02-01

    This work investigated the performance in terms of collection efficiency and aspiration efficiency of a personal sampler capable of collecting ultrafine particles (nanoparticles) in the occupational environment. This sampler consists of a cyclone for respirable particle classification, micro-orifice impactor stages with an acceleration nozzle to achieve nanoparticle classification and a backup filter to collect nanoparticles. Collection efficiencies of the cyclone and impactor stages were determined using monodisperse polystyrene latex and silver particles, respectively. Calibration of the cyclone and impactor stages showed 50% cut-off diameters of 3.95 μm and 94.7 nm meeting the design requirements. Aspiration efficiencies of the sampler were tested in a wind tunnel with wind speeds of 0.5, 1.0, and 1.5 m s(-1). The test samplers were mounted on a full size mannequin with three orientations toward the wind direction (0°, 90°, and 180°). Monodisperse oleic acid aerosols tagged with sodium fluorescein in the size range of 2 to 10 μm were used in the test. For particles smaller than 2 μm, the fluorescent polystyrene latex particles were generated by using nebulizers. For comparison of the aspiration efficiency, a NIOSH two-stage personal bioaerosol sampler was also tested. Results showed that the orientation-averaged aspiration efficiency for both samplers was close to the inhalable fraction curve. However, the direction of wind strongly affected the aspiration efficiency. The results also showed that the aspiration efficiency was not affected by the ratio of free-stream velocity to the velocity through the sampler orifice. Our evaluation showed that the current design of the personal sampler met the designed criteria for collecting nanoparticles ≤100 nm in occupational environments.

  11. Exploring Students' Intuitive Ideas of Randomness Using an iPod Shuffle Activity

    ERIC Educational Resources Information Center

    Ziegler, Laura; Garfield, Joan

    2013-01-01

    This article presents an activity that engages students in considering characteristics of a random sequence, in this case, a randomly generated playlist of songs using the iPod shuffle feature. Students examine simulated sequences of randomly generated songs from a small music library in order to identify characteristics that are used to develop…

  12. New Ideas for Promoting Physical Activity among Middle Age and Older Adults

    ERIC Educational Resources Information Center

    Godbey, Geoffrey; Burnett-Wolle, Sarah; Chow, Hsueh-Wen

    2007-01-01

    Promoting physical activity among middle age and older adults to decrease the incidence of disease and premature death and to combat the health care costs associated with a sedentary lifestyle is more important now than ever. There is now a better understanding of what "successful aging" means and of what aspects of life have the greatest…

  13. Children's Caravan: A Reading Activities Idea Book for Use with Children. A Fun with Reading Book.

    ERIC Educational Resources Information Center

    Kimball, Judith A.

    Intended for elementary school teachers and librarians, this book was designed to help in the development of reading programs for young children. Five sections are included: (1) planning ahead, which includes getting organized, making decorations, collecting "junque" (craft materials and other items needed for craft activities); (2) conducting…

  14. The Complete Resource Book: An Early Childhood Curriculum. Over 2000 Activities and Ideas.

    ERIC Educational Resources Information Center

    Schiller, Pam; Hastings, Kay

    This book is a collection of developmentally appropriate activities for 3- to 5-year-olds, designed to be easily integrated into the daily schedule of an early childhood program. The book's introduction describes the collection's theme units, delineates typical half- and full-day schedules, and discusses the arrangement and management of classroom…

  15. IDEA Fiscal Monitoring and Support Activities 2011-2012 Quick Reference Document

    ERIC Educational Resources Information Center

    Regional Resource Center Program, 2011

    2011-01-01

    This Quick Reference Document is being distributed by the Regional Resource Center Program ARRA/Fiscal Priority Team to provide RRCP state liaisons and other (Technical Assistance) TA providers with a summary of critical fiscal monitoring and support activities they may be involved in during calendar years 2011 and 2012. Like other documents in…

  16. The Ideas of Geography Teachers about In-Service Geography Training Activities

    ERIC Educational Resources Information Center

    Koc, Hakan

    2013-01-01

    The aim of the study is to evaluate the geography workshop (new approaches and new knowledge in geography), in view of the teachers, conducted within the in-service training activities for the geography teachers working in Sivas and Erzurum. The questionnaire, used as the data collection tool, was developed by the researcher. The questionnaire…

  17. Presenting Theoretical Ideas Prior to Inquiry Activities Fosters Theory-Level Knowledge

    ERIC Educational Resources Information Center

    Wecker, Christof; Rachel, Alexander; Heran-Dörr, Eva; Waltner, Christine; Wiesner, Hartmut; Fischer, Frank

    2013-01-01

    In the course of inquiry activities similar to those of real scientists, learners are supposed to develop knowledge both on the level of observable phenomena and on the level of explanatory theories. However, some theories involve theoretical entities (e.g., "Weiss domains") that cannot be observed directly and therefore may be hard to…

  18. Baby Days: Activities, Ideas, and Games for Enjoying Daily Life with a Child under Three.

    ERIC Educational Resources Information Center

    Rowley, Barbara

    Noting the difficulty that many parents have finding activities to fit the busy life, budget, and energy levels of the average parent and the attention span and abilities of the typical infant and toddler, this book is designed as a reference book for parents and others looking for ways to entertain, educate, and enjoy a young child during the…

  19. People* Working . . . *Especially Women . . . A Book of Materials, Activities, and Ideas for the Classroom Teacher.

    ERIC Educational Resources Information Center

    Valiant, Sharon

    This bibliography lists publications and other media, historical facts, and suggestions for activities that show women as working and accomplishing people. Materials are from all grade levels (K-12) and many subject areas. Arrangement is in three sections. Part I deals with women who have worked but not for wages, the pioneer, the homemaker, and…

  20. A field evaluation of a SO 2 passive sampler in tropical industrial and urban air

    NASA Astrophysics Data System (ADS)

    Cruz, Lícia P. S.; Campos, Vânia P.; Silva, Adriana M. C.; Tavares, Tania M.

    Passive samplers have been widely used for over 30 years in the measurement of personal exposure to vapours and gases in the workplace. These samplers have just recently been applied in the monitoring of ambient air, which presents concentrations that are normally much smaller than those found in occupational environments. The locally constructed passive sampler was based on gas molecular diffusion through static air layer. The design used minimizes particle interference and turbulent diffusion. After exposure, the SO 2 trapped in impregnated filters with Na 2CO 3 was extracted by means of an ultrasonic bath, for 15 min, using 1.0×10 -2 mol L -1 H 2O 2. It was determined as SO 4-2 by ion chromatography. The performance of the passive sampler was evaluated at different exposure periods, being applied in industrial and urban areas. Method precision as relative standard deviation for three simultaneously applied passive samplers was within 10%. Passive sampling, when compared to active monitoring methods under real conditions, used in urban and industrial areas, showed an overall accuracy of 15%. A statistical comparison with an active method was performed to demonstrate the validity of the passive method. Sampler capacity varied between 98 and 421 μg SO 2 m -3 for exposure periods of one month and one week, respectively, which allows its use in highly polluted areas.

  1. Middle School Idea Book. A Compendium of Previously Published NABT Ideas and Activities Adapted and Reprinted for Middle School Teachers and Their Students (Grades 5-8).

    ERIC Educational Resources Information Center

    Wilcoxson, Catherine A., Ed.

    This manual specifically addresses teaching middle level students and offers teachers a variety of activities that were selected and edited to reflect middle level philosophy. It is divided into five chapters each with a different focus that contain hands-on activities designed to provide many exciting and fun experiences for adolescents. Every…

  2. An Idea for an Active Seismic Experiment on Mars in 2008

    NASA Technical Reports Server (NTRS)

    Lognonne, Ph.; Banerdt, B.; Giardini, D.; Costard, F.

    2001-01-01

    The detection of liquid water is of prime interest and should have deep implications in the understanding of the Martian hydrological cycle and also in exobiology. In the frame of the 2007 joint CNES-NASA mission to Mars, a set of 4 NETLANDERS developed by an European consortium is expected to be launched in June 2007. We propose to use a second spacecraft going or landing to Mars to release near one of the Netlander a series of artificial metallic meteorites, in order to perform an active seismic experiment providing a seismic profile of the crust and subsurface.

  3. Statistical analysis of the DWPF prototypic sampler

    SciTech Connect

    Postles, R.L.; Reeve, C.P.; Jenkins, W.J.; Bickford, D.F.

    1991-12-31

    The DWPF process will be controlled using assay measurements on samples of feed slurry. These slurries are radioactive, and thus will be sampled remotely. A Hydraguard{trademark} pump-driven sampler system will be used as the remote sampling device. A prototype Hydraguard{trademark} sampler has been studied in a full-scale mock-up of a DWPF process vessel. Two issues were of dominant interest: (1) what accuracy and precision can be provided by such a pump-driven sampler in the face of the slurry rheology; and, if the Hydraguard{trademark} sample accurately represents the slurry in its local area, (2) is the slurry homogeneous enough throughout for it to represent the entire vessel? To determine Hydraguard{trademark} Accuracy, a Grab Sampler of simpler mechanism was used as reference. This (Low) Grab Sampler was located as near to the intake port of the Hydraguard{trademark} as could be arranged. To determine Homogeneity, a second (High) Grab Sampler was located above the first. The data necessary to these determinations comes from the measurement system, so its important variables also affect the results. Thus, the design of the test involved not just Sampling variables, but also some of the Measurement variables as well. However, the main concern was the Sampler and not the Measurement System, so the test design included only such measurement variables as could not be circumvented (Vials, Dissolution Method, and Aliquoting). The test was executed by, or under the direct oversight of, expert technologists. It thus did not explore the many important particulars of ``routine`` plant operations (such as Remote Sample Preparation or Laboratory Shift Operation).

  4. Statistical analysis of the DWPF prototypic sampler

    SciTech Connect

    Postles, R.L.; Reeve, C.P.; Jenkins, W.J.; Bickford, D.F.

    1991-01-01

    The DWPF process will be controlled using assay measurements on samples of feed slurry. These slurries are radioactive, and thus will be sampled remotely. A Hydraguard{trademark} pump-driven sampler system will be used as the remote sampling device. A prototype Hydraguard{trademark} sampler has been studied in a full-scale mock-up of a DWPF process vessel. Two issues were of dominant interest: (1) what accuracy and precision can be provided by such a pump-driven sampler in the face of the slurry rheology; and, if the Hydraguard{trademark} sample accurately represents the slurry in its local area, (2) is the slurry homogeneous enough throughout for it to represent the entire vessel To determine Hydraguard{trademark} Accuracy, a Grab Sampler of simpler mechanism was used as reference. This (Low) Grab Sampler was located as near to the intake port of the Hydraguard{trademark} as could be arranged. To determine Homogeneity, a second (High) Grab Sampler was located above the first. The data necessary to these determinations comes from the measurement system, so its important variables also affect the results. Thus, the design of the test involved not just Sampling variables, but also some of the Measurement variables as well. However, the main concern was the Sampler and not the Measurement System, so the test design included only such measurement variables as could not be circumvented (Vials, Dissolution Method, and Aliquoting). The test was executed by, or under the direct oversight of, expert technologists. It thus did not explore the many important particulars of routine'' plant operations (such as Remote Sample Preparation or Laboratory Shift Operation).

  5. Changing ideas about others' intentions: updating prior expectations tunes activity in the human motor system.

    PubMed

    Jacquet, Pierre O; Roy, Alice C; Chambon, Valérian; Borghi, Anna M; Salemme, Roméo; Farnè, Alessandro; Reilly, Karen T

    2016-05-31

    Predicting intentions from observing another agent's behaviours is often thought to depend on motor resonance - i.e., the motor system's response to a perceived movement by the activation of its stored motor counterpart, but observers might also rely on prior expectations, especially when actions take place in perceptually uncertain situations. Here we assessed motor resonance during an action prediction task using transcranial magnetic stimulation to probe corticospinal excitability (CSE) and report that experimentally-induced updates in observers' prior expectations modulate CSE when predictions are made under situations of perceptual uncertainty. We show that prior expectations are updated on the basis of both biomechanical and probabilistic prior information and that the magnitude of the CSE modulation observed across participants is explained by the magnitude of change in their prior expectations. These findings provide the first evidence that when observers predict others' intentions, motor resonance mechanisms adapt to changes in their prior expectations. We propose that this adaptive adjustment might reflect a regulatory control mechanism that shares some similarities with that observed during action selection. Such a mechanism could help arbitrate the competition between biomechanical and probabilistic prior information when appropriate for prediction.

  6. Changing ideas about others’ intentions: updating prior expectations tunes activity in the human motor system

    PubMed Central

    Jacquet, Pierre O.; Roy, Alice C.; Chambon, Valérian; Borghi, Anna M.; Salemme, Roméo; Farnè, Alessandro; Reilly, Karen T.

    2016-01-01

    Predicting intentions from observing another agent’s behaviours is often thought to depend on motor resonance – i.e., the motor system’s response to a perceived movement by the activation of its stored motor counterpart, but observers might also rely on prior expectations, especially when actions take place in perceptually uncertain situations. Here we assessed motor resonance during an action prediction task using transcranial magnetic stimulation to probe corticospinal excitability (CSE) and report that experimentally-induced updates in observers’ prior expectations modulate CSE when predictions are made under situations of perceptual uncertainty. We show that prior expectations are updated on the basis of both biomechanical and probabilistic prior information and that the magnitude of the CSE modulation observed across participants is explained by the magnitude of change in their prior expectations. These findings provide the first evidence that when observers predict others’ intentions, motor resonance mechanisms adapt to changes in their prior expectations. We propose that this adaptive adjustment might reflect a regulatory control mechanism that shares some similarities with that observed during action selection. Such a mechanism could help arbitrate the competition between biomechanical and probabilistic prior information when appropriate for prediction. PMID:27243157

  7. A Gibbs Sampler for Learning DAGs

    PubMed Central

    Goudie, Robert J. B.; Mukherjee, Sach

    2017-01-01

    We propose a Gibbs sampler for structure learning in directed acyclic graph (DAG) models. The standard Markov chain Monte Carlo algorithms used for learning DAGs are random-walk Metropolis-Hastings samplers. These samplers are guaranteed to converge asymptotically but often mix slowly when exploring the large graph spaces that arise in structure learning. In each step, the sampler we propose draws entire sets of parents for multiple nodes from the appropriate conditional distribution. This provides an efficient way to make large moves in graph space, permitting faster mixing whilst retaining asymptotic guarantees of convergence. The conditional distribution is related to variable selection with candidate parents playing the role of covariates or inputs. We empirically examine the performance of the sampler using several simulated and real data examples. The proposed method gives robust results in diverse settings, outperforming several existing Bayesian and frequentist methods. In addition, our empirical results shed some light on the relative merits of Bayesian and constraint-based methods for structure learning.

  8. COMPARISON OF 24H AVERAGE VOC MONITORING RESULTS FOR RESIDENTIAL INDOOR AND OUTDOOR AIR USING CARBOPACK X-FILLED DIFFUSIVE SAMPLERS AND ACTIVE SAMPLING - A PILOT STUDY

    EPA Science Inventory

    Analytical results obtained by thermal desorption GC/MS for 24h diffusive sampling of 11 volatile organic compounds (VOCs) are compared with results of time-averaged active sampling at a known constant flow rate. Air samples were collected with co-located duplicate diffusive samp...

  9. Polymer-water partition coefficients in polymeric passive samplers.

    PubMed

    Asgarpour Khansary, Milad; Shirazian, Saeed; Asadollahzadeh, Mehdi

    2017-01-01

    Passive samplers are of the most applied methods and tools for measuring concentration of hydrophobic organic compounds in water (c 1(W) ) in which the polymer-water partition coefficients (D) are of fundamental importance for reliability of measurements. Due to the cost and time associated with the experimental researches, development of a predictive method for estimation and evaluation of performance of polymeric passive samplers for various hydrophobic organic compounds is highly needed and valuable. For this purpose, in this work, following the fundamental chemical thermodynamic equations governing the concerned local equilibrium, successful attempts were made to establish a theoretical model of polymer-water partition coefficients. Flory-Huggins model based on the Hansen solubility parameters was used for calculation of activity coefficients. The method was examined for reliability of calculations using collected data of three polymeric passive samplers and ten compounds. A regression model of form ln(D) = 0.707ln(c 1(p) ) - 2.7391 with an R (2)  = 0.9744 was obtained to relate the polymer-water partition coefficients (D) and concentration of hydrophobic organic compounds in passive sampler (c 1(p) ). It was also found that polymer-water partition coefficients are related to the concentration of hydrophobic organic compounds in water (c 1(W) ) as ln(D) = 2.412ln(c 1(p) ) - 9.348. Based on the results, the tie lines of concentration for hydrophobic organic compounds in passive sampler (c 1(p) ) and concentration of hydrophobic organic compounds in water (c 1(W) ) are in the form of ln(c 1(W) ) = 0.293ln(c 1(p) ) + 2.734. The composition of water sample and the interaction parameters of dissolved compound-water and dissolved compound-polymer, temperature, etc. actively influence the values of partition coefficient. The discrepancy observed over experimental data can be simply justified based on the local condition of sampling sites which alter

  10. Coalescent genealogy samplers: windows into population history.

    PubMed

    Kuhner, Mary K

    2009-02-01

    Coalescent genealogy samplers attempt to estimate past qualities of a population, such as its size, growth rate, patterns of gene flow or time of divergence from another population, based on samples of molecular data. Genealogy samplers are increasingly popular because of their potential to disentangle complex population histories. In the last decade they have been widely applied to systems ranging from humans to viruses. Findings include detection of unexpected reproductive inequality in fish, new estimates of historical whale abundance, exoneration of humans for the prehistoric decline of bison and inference of a selective sweep on the human Y chromosome. This review summarizes available genealogy-sampler software, including data requirements and limitations on the use of each program.

  11. Operability test report for 211BA flow proportional sampler

    SciTech Connect

    Weissenfels, R.D.

    1995-01-01

    This operability report will verify that the 211-BA flow proportional sampler functions as intended by design. The sampler was installed by Project W-007H and is part of BAT/AKART for the BCE liquid effluent stream.

  12. Using a Concept Mapping Tool with a Photograph Association Technique (CoMPAT) to Elicit Children's Ideas about Microbial Activity

    ERIC Educational Resources Information Center

    Byrne, Jenny; Grace, Marcus

    2010-01-01

    Concept mapping is a technique used to provide a visual representation of an individual's ideas about a concept or set of related concepts. This paper describes a concept mapping tool using a photograph association technique (CoMPAT) that is considered to be a novel way of eliciting children's ideas. What children at 11 years of age know about…

  13. Development and evaluation of a self-cleaning custom-built auto sampler controlled by a low-cost RaspberryPi microcomputer for online enzymatic activity measurements.

    PubMed

    Stadler, Philipp; Farnleitner, Andreas H; Zessner, Matthias

    2017-01-01

    A fully automated on-site device (SAMP-FIL) that enables water sampling with simultaneous filtration and effective cleaning procedures of the device's components was developed and field-tested. The SAMP-FIL was custom-built using commercially available components and was controlled by a RaspberryPi single-board computer operating open-source software. SAMP-FIL was designed for sample pre-treatment with minimal sample alteration to meet the requirements of on-site measurement devices that cannot handle coarse suspended solids within the measurement procedure or cycle. A highly effective cleaning procedure provides a fresh and minimally altered sample for the connected measurement device. The construction and programmed software facilitates the use of SAMP-FIL for different connected measurement devices. The SAMP-FIL sample pretreatment was tested for over one year for rapid and on-site enzymatic activity (beta-d-glucuronidase, GLUC) determination (BACTcontrol) in sediment-laden stream water. The formerly used proprietary sampling set-up was assumed to lead to significant damping of the measurement signal due to its susceptibility to clogging, debris accumulation and bio-film accumulation. The implementation of SAMP-FIL considerably increased the error-free running time and measurement accuracy of BACTcontrol devices. This paper describes how low-cost microcomputers, such as the RaspberryPi, can be used by operators to substantially improve established measuring systems via effective sampling devices. Furthermore, the results of this study highlight the importance of adequate sample pretreatment for the quality of on-site measurements.

  14. Advanced concepts report on the detection of xenon with a miniature whole air sampler capable of extended operating times

    SciTech Connect

    Motes, B.G.; McManus, G.J.; Bird, S.K.; Fernandez, S.J.

    1993-07-01

    Many monitoring activities require the collection of whole air samples over an extended time interval without loss or concentration of any atmospheric constituents. Described is the development and laboratory testing of a whole air sampler capable of collecting a 100 liter sample over a period of 0.63 days. The sampler has an empty weight of 7.79 kg and an overall size of 20.8-cm {times} 20.8-cm {times} 66.1-cm. The conceptual design for the development of smaller, higher-performance whole air samplers is also reported.

  15. The Big Book of Therapeutic Activity Ideas for Children and Teens: Inspiring Arts-Based Activities and Character Education Curricula

    ERIC Educational Resources Information Center

    Joiner, Lindsey

    2011-01-01

    For difficult or challenging children and teenagers in therapeutic or school settings, creative activities can be an excellent way of increasing enjoyment and boosting motivation, making the sessions more rewarding and successful for everyone involved. This resource provides over one hundred tried-and-tested fun and imaginative therapeutic…

  16. 21 CFR 884.1550 - Amniotic fluid sampler (amniocentesis tray).

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Amniotic fluid sampler (amniocentesis tray). 884... Diagnostic Devices § 884.1550 Amniotic fluid sampler (amniocentesis tray). (a) Identification. The amniotic fluid sampler (amniocentesis tray) is a collection of devices used to aspirate amniotic fluid from...

  17. Laboratory study of selected personal inhalable aerosol samplers.

    PubMed

    Görner, Peter; Simon, Xavier; Wrobel, Richard; Kauffer, Edmond; Witschger, Olivier

    2010-03-01

    Assessment of inhalable dust exposure requires reliable sampling methods in order to measure airborne inhalable particles' concentrations. Many inhalable aerosol samplers can be used but their performances widely vary and remain unknown in some cases. The sampling performance of inhalable samplers is strongly dependent on particle size and ambient air velocity. Five inhalable aerosol samplers have been studied in two laboratory wind tunnels using polydisperse glass-beads' test aerosol. Samplers tested were IOM sampler (UK), two versions of CIP 10-I sampler, v1 and v2 (F), 37-mm closed face cassette sampler (USA), 37-mm cassette fitted up with an ACCU-CAP insert (USA), and Button sampler (USA). Particle size-dependent sampling efficiencies were measured in a horizontal wind tunnel under a 1 m s(-1) wind velocity and in a vertical tunnel under calm air, using a specific method with Coulter(R) counter particle size number distribution determinations. Compared with CEN-ISO-ACGIH sampling criteria for inhalable dust, the experimental results show fairly high sampling efficiency for the IOM and CIP 10-I v2 samplers and slightly lower efficiencies for the Button and CIP 10-I v1 samplers. The closed face cassette (4-mm orifice) produced the poorest performances of all the tested samplers. This can be improved by using the ACCU-CAP internal capsule, which prevents inner wall losses inside the cassette. Significant differences between moving air and calm air sampling efficiency were observed for all the studied samplers.

  18. 21 CFR 884.1560 - Fetal blood sampler.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Fetal blood sampler. 884.1560 Section 884.1560... § 884.1560 Fetal blood sampler. (a) Identification. A fetal blood sampler is a device used to obtain fetal blood transcervically through an endoscope by puncturing the fetal skin with a short blade...

  19. 21 CFR 884.1560 - Fetal blood sampler.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Fetal blood sampler. 884.1560 Section 884.1560... § 884.1560 Fetal blood sampler. (a) Identification. A fetal blood sampler is a device used to obtain fetal blood transcervically through an endoscope by puncturing the fetal skin with a short blade...

  20. 21 CFR 884.1560 - Fetal blood sampler.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Fetal blood sampler. 884.1560 Section 884.1560... § 884.1560 Fetal blood sampler. (a) Identification. A fetal blood sampler is a device used to obtain fetal blood transcervically through an endoscope by puncturing the fetal skin with a short blade...

  1. 21 CFR 884.1560 - Fetal blood sampler.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Fetal blood sampler. 884.1560 Section 884.1560... § 884.1560 Fetal blood sampler. (a) Identification. A fetal blood sampler is a device used to obtain fetal blood transcervically through an endoscope by puncturing the fetal skin with a short blade...

  2. A new sampler for stratified lagoon chemical and microbiological assessments

    Technology Transfer Automated Retrieval System (TEKTRAN)

    A water column sampler was needed to study stratification of nutrients and bacteria in a swine manure lagoon. Conventional samplers yielded shallow samples near the bank or required a boat. These limitations prompted development of a new sampler to collect at multiple depths with minimal disturbanc...

  3. 21 CFR 884.1560 - Fetal blood sampler.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Fetal blood sampler. 884.1560 Section 884.1560... § 884.1560 Fetal blood sampler. (a) Identification. A fetal blood sampler is a device used to obtain fetal blood transcervically through an endoscope by puncturing the fetal skin with a short blade...

  4. 21 CFR 884.1550 - Amniotic fluid sampler (amniocentesis tray).

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Amniotic fluid sampler (amniocentesis tray). 884... Diagnostic Devices § 884.1550 Amniotic fluid sampler (amniocentesis tray). (a) Identification. The amniotic fluid sampler (amniocentesis tray) is a collection of devices used to aspirate amniotic fluid from...

  5. 21 CFR 884.1550 - Amniotic fluid sampler (amniocentesis tray).

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 21 Food and Drugs 8 2011-04-01 2011-04-01 false Amniotic fluid sampler (amniocentesis tray). 884... Diagnostic Devices § 884.1550 Amniotic fluid sampler (amniocentesis tray). (a) Identification. The amniotic fluid sampler (amniocentesis tray) is a collection of devices used to aspirate amniotic fluid from...

  6. 21 CFR 884.1550 - Amniotic fluid sampler (amniocentesis tray).

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... 21 Food and Drugs 8 2012-04-01 2012-04-01 false Amniotic fluid sampler (amniocentesis tray). 884... Diagnostic Devices § 884.1550 Amniotic fluid sampler (amniocentesis tray). (a) Identification. The amniotic fluid sampler (amniocentesis tray) is a collection of devices used to aspirate amniotic fluid from...

  7. 21 CFR 884.1550 - Amniotic fluid sampler (amniocentesis tray).

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 21 Food and Drugs 8 2013-04-01 2013-04-01 false Amniotic fluid sampler (amniocentesis tray). 884... Diagnostic Devices § 884.1550 Amniotic fluid sampler (amniocentesis tray). (a) Identification. The amniotic fluid sampler (amniocentesis tray) is a collection of devices used to aspirate amniotic fluid from...

  8. Student Sampler: Facts in Brief on North Carolina.

    ERIC Educational Resources Information Center

    North Carolina State Dept. of Public Instruction, Raleigh.

    This information sampler was compiled to assist students in their study of North Carolina. Every year North Carolina students must complete a special project on their state. The sampler was designed to introduce students to the people, places, and events that have shaped North Carolina's history. Topics in the sampler include state symbols,…

  9. The Curious Naturalist: A Handbook of Crafts, Games, Activities, and Ideas for Teaching Children about the Magical World of Nature. Second Edition.

    ERIC Educational Resources Information Center

    Mitchell, John; And Others

    This handbook offers crafts, games, activities, and ideas for teaching the novice naturalist. Equally usable by both children and adults, the handbook can be used as a simple field guide to help identify and understand the night sky, woodland plants and wildflowers, birds, and animals. The guide categorizes activities and information by the…

  10. Flighty idea

    SciTech Connect

    Slocombe, W.B.

    1987-12-01

    One of the latest arms control initiatives being debated outside the government is a proposal for a complete ban on the testing of ballistic missiles. The ban is not a new idea, but recently it has been given greater visibility through the endorsement of the initiative by all but one of the Democratic presidential candidates. Its proponents assert that a flight test ban will prevent destabilizing modernizations of ballistic-missile technology, thereby decreasing the preemptive nuclear attack threat to US. ICBMs and strategic bomber forces, lessening incentives to launch a first strike, and adding overall to crisis and arms race stability. Closer analysis suggests, however, that although some flight-test restrictions could prove to be a useful component of a broader arms control regime, a total ban on ballistic-missile flight tests is unlikely to produce anything like the dramatic benefits claimed. It would block important programs needed to maintain stable deterrence, would present a number of verification problems, and would divert the superpowers from pursuing more fruitful and effective arms-control measures.

  11. Releasable Asbestos Field Sampler (RAFS) Operation Manual

    EPA Science Inventory

    The Releasable Asbestos Field Sampler (RAFS) is a field instrument that provides an in-situ measurement of asbestos releasability from consistent and reproducible mechanical agitation of the source material such as soil. The RAFS was designed to measure concentration (asbestos st...

  12. A personal nanoparticle respiratory deposition (NRD) sampler.

    PubMed

    Cena, Lorenzo G; Anthony, T Renée; Peters, Thomas M

    2011-08-01

    A lightweight (60 g), personal nanoparticle respiratory deposition (NRD) sampler was developed to selectively collect particles smaller than 300 nm similar to their typical deposition in the respiratory tract. The sampler operates at 2.5 Lpm and consists of a respirable cyclone fitted with an impactor and a diffusion stage containing mesh screens. The cut-point diameter of the impactor was determined to be 300 nm with a sharpness σ = 1.53. The diffusion stage screens collect particles with an efficiency that matches the deposition efficiency of particles smaller than 300 nm in the respiratory tract. Impactor separation performance was unaffected by loading at typical workplace levels (p-value = 0.26). With chemical analysis of the diffusion media, the NRD sampler can be used to directly assess exposures to nanoparticles of a specific composition apart from other airborne particles. The pressure drop of the NRD sampler is sufficiently low to permit its operation with conventional, belt-mounted sampling pumps.

  13. South Philadelphia Passive Sampler and Sensor Study

    EPA Science Inventory

    From June 2013 to March 2015, a total of 41 two-week duration passive sampler deployments were conducted at 17 sites in South Philadelphia, with results for benzene discussed here. Complementary time-resolved measurements with lower cost prototype fenceline sensors and an open-pa...

  14. Retained Gas Sampler Calibration and Simulant Tests

    SciTech Connect

    CRAWFORD, B.A.

    2000-01-05

    This test plan provides a method for calibration of the retained gas sampler (RGS) for ammonia gas analysis. Simulant solutions of ammonium hydroxide at known concentrations will be diluted with isotopically labeled 0.04 M ammonium hydroxide solution. Sea sand solids will also be mixed with ammonium hydroxide solution and diluent to determine the accuracy of the system for ammonia gas analysis.

  15. USE OF PASSIVE SAMPLERS IN THE DEARS

    EPA Science Inventory

    The Detroit Exposure and Aerosol Research Study (DEARS) employs a number of passive diffusion-based samplers for the collection of select gaseous air pollutants. These pollutants include criteria gases such as ozone, carbonyls such as acrolein, and volatile organics such as 1-3, ...

  16. Quantum Gibbs Samplers: The Commuting Case

    NASA Astrophysics Data System (ADS)

    Kastoryano, Michael J.; Brandão, Fernando G. S. L.

    2016-06-01

    We analyze the problem of preparing quantum Gibbs states of lattice spin Hamiltonians with local and commuting terms on a quantum computer and in nature. Our central result is an equivalence between the behavior of correlations in the Gibbs state and the mixing time of the semigroup which drives the system to thermal equilibrium (the Gibbs sampler). We introduce a framework for analyzing the correlation and mixing properties of quantum Gibbs states and quantum Gibbs samplers, which is rooted in the theory of non-commutative {mathbb{L}_p} spaces. We consider two distinct classes of Gibbs samplers, one of them being the well-studied Davies generator modelling the dynamics of a system due to weak-coupling with a large Markovian environment. We show that their spectral gap is independent of system size if, and only if, a certain strong form of clustering of correlations holds in the Gibbs state. Therefore every Gibbs state of a commuting Hamiltonian that satisfies clustering of correlations in this strong sense can be prepared efficiently on a quantum computer. As concrete applications of our formalism, we show that for every one-dimensional lattice system, or for systems in lattices of any dimension at temperatures above a certain threshold, the Gibbs samplers of commuting Hamiltonians are always gapped, giving an efficient way of preparing the associated Gibbs states on a quantum computer.

  17. 7 CFR 29.20 - Sampler.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 2 2014-01-01 2014-01-01 false Sampler. 29.20 Section 29.20 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE COMMODITY STANDARDS AND STANDARD CONTAINER REGULATIONS...

  18. 7 CFR 29.20 - Sampler.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 2 2011-01-01 2011-01-01 false Sampler. 29.20 Section 29.20 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE COMMODITY STANDARDS AND STANDARD CONTAINER REGULATIONS...

  19. South Philadelphia Passive Sampler and Sensor Study

    EPA Science Inventory

    Starting in June 2013, the United States Environmental Protection Agency (U.S. EPA) and the City of Philadelphia Air Measurements Services began collaborative research on the use of passive samplers (PSs) and stand-alone air measurement (SAM) systems to improve information on the...

  20. Ideas: Measurement.

    ERIC Educational Resources Information Center

    Sovchik, Robert; Meconi, L. J.

    1994-01-01

    Presents measurement activities for K-3, 4-6, 5-6, and 7-8 grade levels. Activities include a measurement scavenger hunt, using a clinometer to measure angles of elevation, estimating the age of trees, measuring the height of a tree, and measuring objects at a distance. Includes reproducible worksheets. (MDH)

  1. Idea Bank.

    ERIC Educational Resources Information Center

    Stein, Robert E.; And Others

    1988-01-01

    Describes 11 hands-on activities involving genetics; principles of chemical luminescence; a nucleus model; dissection pins; science, technology, and society (STS) courseware; plant dyes; the scientific method; current events; a portable planetarium; solar energy; and burning tests. (YP)

  2. Idea Bank.

    ERIC Educational Resources Information Center

    Science Teacher, 1990

    1990-01-01

    Eight activities for use in the science classroom are presented. Included are insect collecting, laboratory procedures and safety, recycling, current events, variable manipulation, scientific method, electricity, and mechanics (Newton's Second Law of Motion). (KR)

  3. Idea Bank.

    ERIC Educational Resources Information Center

    Bisbee, Gregory D.; Fritz, Jane K.; Zurenda, Deb

    1997-01-01

    Presents three science activities: (1) Pizza Quadrants, a tool for estimating population size; (2) Ion Models, to assist students in understanding how to balance equations; and (3) Endangered Species Project, an interdisciplinary unit. (DDR)

  4. Evaluation of passive diffusion bag samplers, dialysis samplers, and nylon-screen samplers in selected wells at Andersen Air Force Base, Guam, March-April 2002

    USGS Publications Warehouse

    Vroblesky, Don A.; Joshi, Manish; Morrell, Jeff; Peterson, J.E.

    2003-01-01

    During March-April 2002, the U.S. Geological Survey, Earth Tech, and EA Engineering, Science, and Technology, Inc., in cooperation with the Air Force Center for Environmental Excellence, tested diffusion samplers at Andersen Air Force Base, Guam. Samplers were deployed in three wells at the Main Base and two wells at Marianas Bonins (MARBO) Annex as potential ground-water monitoring alternatives. Prior to sampler deployment, the wells were tested using a borehole flowmeter to characterize vertical flow within each well. Three types of diffusion samplers were tested: passive diffusion bag (PDB) samplers, dialysis samplers, and nylon-screen samplers. The primary volatile organic compounds (VOCs) tested in ground water at Andersen Air Force Base were trichloroethene and tetrachloroethene. In most comparisons, trichloroethene and tetrachloroethene concentrations in PDB samples closely matched concentrations in pumped samples. Exceptions were in wells where the pumping or ambient flow produced vertical translocation of water in a chemically stratified aquifer. In these wells, PDB samplers probably would be a viable alternative sampling method if they were placed at appropriate depths. In the remaining three test wells, the trichloroethene or tetrachloroethene concentrations obtained with the diffusion samplers closely matched the result from pumped sampling. Chloride concentrations in nylon-screen samplers were compared with chloride concentrations in dialysis and pumped samples to test inorganic-solute diffusion into the samplers across a range of concentrations. The test showed that the results from nylon-screen samplers might have underestimated chloride concentrations at depths with elevated chloride concentrations. The reason for the discrepancy in this investigation is unknown, but may be related to nylon-screen-mesh size, which was smaller than that used in previous investigations.

  5. Classroom Idea-Sparkers

    ERIC Educational Resources Information Center

    Kieff, Judith

    2007-01-01

    This article presents four Idea-Sparkers that were submitted by Jason McKinney, a graduate student at Southern Mississippi University and a 1st-grade teacher at Pisgah Elementary in Hattiesburg, Mississippi. First is entitled, "Raceway in the Classroom." This activity can help increase children's fluency and ability to identify numerous…

  6. Teaching Ideas. Potpourri 8.

    ERIC Educational Resources Information Center

    Kahl, Marilyn, Ed.

    This publication contains a collection of teaching ideas and class activities for organization, journals, dictation, creative writing, outlines, poetry, vocabulary, film review word cards, paragraphing, career research and much more. Some of the materials, listed with their authors, include: (1) "Magazine Board" (Frieda Owen); (2)…

  7. Middle Grades Ideas.

    ERIC Educational Resources Information Center

    Classroom Computer Learning, 1984

    1984-01-01

    Five ideas for computer-oriented classroom activities are presented. They include sending secret messages (while introducing the American Standard Code for Information Interchange- ASCII), conducting a computer survey, playing adventure games, showing why the END command is needed, and using control characters to protect a program. (JN)

  8. Upper Grades Ideas.

    ERIC Educational Resources Information Center

    Thornburg, David; Beane, Pam

    1983-01-01

    Presents programming ideas using LOGO, activity for converting flowchart into a computer program, and a Pascal program for generating music using paddles. Includes the article "Helping Computers Adapt to Kids" by Philip Nothnagle; a program for estimating length of lines is included. (JN)

  9. Sharing Teaching Ideas.

    ERIC Educational Resources Information Center

    Lippold, George C.

    1982-01-01

    Ideas are presented regarding: (1) unique learning activities for students who have difficulty with operations with signed numbers; (2) a mathematical inspection of a unique card trick that can be expressed as an equation; and (3) sketching of graphs of composite trigonometric functions. (MP)

  10. Middle Grades Ideas.

    ERIC Educational Resources Information Center

    Classroom Computer Learning, 1983

    1983-01-01

    Activities for middle/junior high school students are presented, including use of string variables, science lesson ideas, computer scavenger hunt, and guidelines for interviewing people who own/use computers. Includes "I'll Write...Just Lead Me to My Computer" by Robert Engberg, discussing word processing instruction. (JN)

  11. Sharing Teaching Ideas.

    ERIC Educational Resources Information Center

    Mathematics Teacher, 1992

    1992-01-01

    Presents three teaching ideas involving (1) results of participation in the annual American Statistical Association's poster contest for students in grades K-12; (2) a variation on an annuity problem in which the contribution each year is increased by a given percentage; and (3) concrete activities to help students understand the meaning of radian…

  12. Early Grades Ideas.

    ERIC Educational Resources Information Center

    Classroom Computer Learning, 1984

    1984-01-01

    Presented are six practical teaching suggestions selected from commercially available materials and ideas submitted by readers. A personalized poster program, a hiking program, and activities in which students send the Logo turtle on an egg hunt and study pattern block programing are included. (JN)

  13. Idea Bank.

    ERIC Educational Resources Information Center

    Science Teacher, 1987

    1987-01-01

    Describes four classroom activities that deal with a variety of scientific concepts. Discusses lessons on the cycles of matter in ecosystems, the calculation of the height of tall objects, bleaching techniques for bones, and the effects of force on sound when closing doors. (TW)

  14. Idea Bank.

    ERIC Educational Resources Information Center

    Buck, Cheryl A.; And Others

    1988-01-01

    Introduces 12 activities for teaching science. Includes one way to begin the school year, peristalsis demonstration, candy-coated metrics, 3-D constellations, 35-mm astrophotography, create an alien organism, jet propulsion, computer programs for pendulum calculations, plant versus animal, chocolate chip petroleum, paper rockets, and…

  15. Idea Bank.

    ERIC Educational Resources Information Center

    Science Teacher, 1989

    1989-01-01

    Describes classroom activities and models for migration, mutation, and isolation; a diffusion model; Bernoulli's principle; sound in a vacuum; time regression mystery of DNA; seating chart lesson plan; algae mystery laboratory; water as mass; science fair; flipped book; making a cloud; wet mount slide; timer adaptation; thread slide model; and…

  16. Site comparison of selected aerosol samplers in the wood industry.

    PubMed

    Kauffer, Edmond; Wrobel, Richard; Görner, Peter; Rott, Christelle; Grzebyk, Michel; Simon, Xavier; Witschger, Olivier

    2010-03-01

    Several samplers (IOM, CIP 10-I v1, ACCU-CAP, and Button) were evaluated at various wood industry companies using the CALTOOL system. The results obtained show that compared to the CALTOOL mouth, which can be considered to be representative of the exposure of a person placed at the same location under the same experimental conditions, the concentrations measured by the IOM, CIP 10-I v1, and ACCU-CAP samplers are not significantly different (respectively, 1.12, 0.94, and 0.80 compared to 1.00), the Button sampler (0.86) being close to the ACCU-CAP sampler. Comparisons of dust concentrations measured using both a closed-face cassette (CFC) and one of the above samplers were also made. In all, 235 sampling pairs (sampler + CFC) taken at six companies provided us with a comparison of concentrations measured using IOM, CIP 10-I v1, ACCU-CAP, and Button samplers with concentrations measured using a CFC. All the studied samplers collected systematically more dust than the CFC (2.0 times more for the IOM sampler, 1.84 times more for the CIP 10-I v1 sampler, 1.68 times more for the ACCU-CAP sampler, and 1.46 times more for the Button sampler). The literature most frequently compares the IOM sampler with the CFC: published results generally show larger differences compared with the CFC than those found during our research. There are several explanations for this difference, one of which involves CFC orientation during sampling. It has been shown that concentrations measured using a CFC are dependent on its orientation. Different CFC positions from one sampling session to another are therefore likely to cause differences during CFC-IOM sampler comparisons.

  17. The "Power Play! Campaign's School Idea & Resource Kits" Improve Determinants of Fruit and Vegetable Intake and Physical Activity among Fourth- and Fifth-Grade Children

    ERIC Educational Resources Information Center

    Keihner, Angie Jo; Meigs, Reba; Sugerman, Sharon; Backman, Desiree; Garbolino, Tanya; Mitchell, Patrick

    2011-01-01

    Objective: Examine the effect of the "California Children's Power Play! Campaign's School Idea & Resource Kits" for fourth/fifth grades on the psychosocial determinants of fruit and vegetable (FV) intake and physical activity (PA). Methods: Randomized, controlled trial (n = 31 low-resource public schools; 1,154 children). Ten…

  18. Three-Wheel Brush-Wheel Sampler

    NASA Technical Reports Server (NTRS)

    Duckworth, Geoffrey A.; Liu, Jun; Brown, Mark G.

    2010-01-01

    A new sampler is similar to a common snow blower, but is robust and effective in sample collection. The brush wheels are arranged in a triangle shape, each driven by a brushless DC motor and planetary gearhead embedded in the wheel shaft. Its speed can be varied from 800 - 2,000 rpm, depending on the surface regolith resistance. The sample-collecting flow path, and internal features, are designed based on flow dynamics, and the sample-collecting rates have consistently exceeded the requirement under various conditions that span the range of expected surface properties. The brush-wheel sampler (BWS) is designed so that the flow channel is the main body of the apparatus, and links the brush-wheel assembly to the sample canister. The combination of the three brush wheels, the sample flow path, and the canister location make sample collection, storage, and transfer an easier task.

  19. Dual-Sampler Processor Digitizes CCD Output

    NASA Technical Reports Server (NTRS)

    Salomon, P. M.

    1986-01-01

    Circuit for processing output of charge-coupled device (CCD) imager provides increased time for analog-to-digital conversion, thereby reducing bandwidth required for video processing. Instead of one sampleand-hold circuit of conventional processor, improved processor includes two sample-and-hold circuits alternated with each other. Dual-sampler processor operates with lower bandwidth and with timing requirements less stringent than those of single-sample processor.

  20. A wind tunnel test of newly developed personal bioaerosol samplers.

    PubMed

    Su, Wei-Chung; Tolchinsky, Alexander D; Sigaev, Vladimir I; Cheng, Yung Sung

    2012-07-01

    In this study the performance of two newly developed personal bioaerosol samplers was evaluated. The two test samplers are cyclone-based personal samplers that incorporate a recirculating liquid film. The performance evaluations focused on the physical efficiencies that a personal bioaerosol sampler could provide, including aspiration, collection, and capture efficiencies. The evaluation tests were carried out in a wind tunnel, and the test personal samplers were mounted on the chest of a full-size manikin placed in the test chamber of the wind tunnel. Monodisperse fluorescent aerosols ranging from 0.5 to 20 microm were used to challenge the samplers. Two wind speeds of 0.5 and 2.0 m/sec were employed as the test wind speeds in this study. The test results indicated that the aspiration efficiency of the two test samplers closely agreed with the ACGIH inhalable convention within the size range of the test aerosols. The aspiration efficiency was found to be independent of the sampling orientation. The collection efficiency acquired from these two samplers showed that the 50% cutoff diameters were both around 0.6 microm. However the wall loss of these two test samplers increased as the aerosol size increased, and the wall loss of PAS-4 was considerably higher than that of PAS-5, especially in the aerosol size larger than 5 microm, which resulted in PAS-4 having a relatively lower capture efficiency than PAS-5. Overall, the PAS-5 is considered a better personal bioaerosol sampler than the PAS-4.

  1. Formed Core Sampler Hydraulic Conductivity Testing

    SciTech Connect

    Miller, D. H.; Reigel, M. M.

    2012-09-25

    A full-scale formed core sampler was designed and functionally tested for use in the Saltstone Disposal Facility (SDF). Savannah River National Laboratory (SRNL) was requested to compare properties of the formed core samples and core drilled samples taken from adjacent areas in the full-scale sampler. While several physical properties were evaluated, the primary property of interest was hydraulic conductivity. Differences in hydraulic conductivity between the samples from the formed core sampler and those representing the bulk material were noted with respect to the initial handling and storage of the samples. Due to testing conditions, the site port samples were exposed to uncontrolled temperature and humidity conditions prior to testing whereas the formed core samples were kept in sealed containers with minimal exposure to an uncontrolled environment prior to testing. Based on the results of the testing, no significant differences in porosity or density were found between the formed core samples and those representing the bulk material in the test stand.

  2. Thin layer chromatography residue applicator sampler

    DOEpatents

    Nunes, Peter J.; Kelly, Fredrick R.; Haas, Jeffrey S.; Andresen, Brian D.

    2007-07-24

    A thin layer chromatograph residue applicator sampler. The residue applicator sampler provides for rapid analysis of samples containing high explosives, chemical warfare, and other analyses of interest under field conditions. This satisfied the need for a field-deployable, small, hand-held, all-in-one device for efficient sampling, sample dissolution, and sample application to an analytical technique. The residue applicator sampler includes a sampling sponge that is resistant to most chemicals and is fastened via a plastic handle in a hermetically sealed tube containing a known amount of solvent. Upon use, the wetted sponge is removed from the sealed tube and used as a swiping device across an environmental sample. The sponge is then replaced in the hermetically sealed tube where the sample remains contained and dissolved in the solvent. A small pipette tip is removably contained in the hermetically sealed tube. The sponge is removed and placed into the pipette tip where a squeezing-out of the dissolved sample from the sponge into the pipette tip results in a droplet captured in a vial for later instrumental analysis, or applied directly to a thin layer chromatography plate for immediate analysis.

  3. Field comparison of three inhalable samplers (IOM, PGP-GSP 3.5 and Button) for welding fumes.

    PubMed

    Zugasti, Agurtzane; Montes, Natividad; Rojo, José M; Quintana, M José

    2012-02-01

    Inhalable sampler efficiency depends on the aerodynamic size of the airborne particles to be sampled and the wind speed. The aim of this study was to compare the behaviour of three personal inhalable samplers for welding fumes generated by Manual Metal Arc (MMA) and Metal Active Gas (MAG) processes. The selected samplers were the ones available in Spain when the study began: IOM, PGP-GSP 3.5 (GSP) and Button. Sampling was carried out in a welding training center that provided a homogeneous workplace environment. The static sampling assembly used allowed the placement of 12 samplers and 2 cascade impactors simultaneously. 183 samples were collected throughout 2009 and 2010. The range of welding fumes' mass concentrations was from 2 mg m(-3) to 5 mg m(-3). The pooled variation coefficients for the three inhalable samplers were less than or equal to 3.0%. Welding particle size distribution was characterized by a bimodal log-normal distribution, with MMADs of 0.7 μm and 8.2 μm. For these welding aerosols, the Button and the GSP samplers showed a similar performance (P = 0.598). The mean mass concentration ratio was 1.00 ± 0.01. The IOM sampler showed a different performance (P < 0.001). The mean mass concentration ratios were 0.90 ± 0.01 for Button/IOM and 0.92 ± 0.02 for GSP/IOM. This information is useful to consider the measurements accomplished by the IOM, GSP or Button samplers together, in order to assess the exposure at workplaces over time or to study exposure levels in a specific industrial activity, as welding operations.

  4. Budget Anthropology: A Unit Sampler.

    ERIC Educational Resources Information Center

    Fraker, G. Alan

    Creative and inexpensive teaching suggestions for high school anthropology courses are presented. They are chosen specifically for programs which cannot afford expensive curriculum materials. All activities demonstrate the application of universal anthropological principles to the American society. Seven areas which reflect the general functions…

  5. FIELD PERFORMANCE OF PM 2.5 FEDERAL REFERENCE METHOD SAMPLERS

    EPA Science Inventory

    The results of several research field studies were evaluated to estimate the precision and bias of various designated PM2.5 Federal Reference Method (FRM) samplers. Precision was high in three carefully conducted research studies where all operational activities were strictly ...

  6. NEW SOIL VOC SAMPLERS: EN CORE AND ACCU CORE SAMPLING/STORAGE DEVICES FOR VOC ANALYSIS

    SciTech Connect

    Susan S. Sorini; John F. Schabron; Joseph F. Rovani Jr

    2006-06-01

    Soil sampling and storage practices for volatile organic analysis must be designed to minimize loss of volatile organic compounds (VOCs) from samples. The En Core{reg_sign} sampler is designed to collect and store soil samples in a manner that minimizes loss of contaminants due to volatilization and/or biodegradation. An ASTM International (ASTM) standard practice, D 6418, Standard Practice for Using the Disposable En Core Sampler for Sampling and Storing Soil for Volatile Organic Analysis, describes use of the En Core sampler to collect and store a soil sample of approximately 5 grams or 25 grams for volatile organic analysis and specifies sample storage in the En Core sampler at 4 {+-} 2 C for up to 48 hours; -7 to -21 C for up to 14 days; or 4 {+-} 2 C for up to 48 hours followed by storage at -7 to -21 C for up to five days. This report discusses activities performed during the past year to promote and continue acceptance of the En Core samplers based on their performance to store soil samples for VOC analysis. The En Core sampler is designed to collect soil samples for VOC analysis at the soil surface. To date, a sampling tool for collecting and storing subsurface soil samples for VOC analysis is not available. Development of a subsurface VOC sampling/storage device was initiated in 1999. This device, which is called the Accu Core{trademark} sampler, is designed so that a soil sample can be collected below the surface using a dual-tube penetrometer and transported to the laboratory for analysis in the same container. Laboratory testing of the current Accu Core design shows that the device holds low-level concentrations of VOCs in soil samples during 48-hour storage at 4 {+-} 2 C and that the device is ready for field evaluation to generate additional performance data. This report discusses a field validation exercise that was attempted in Pennsylvania in 2004 and activities being performed to plan and conduct a field validation study in 2006. A draft ASTM

  7. Ideas Plus: A Collection of Practical Teaching Ideas. Book 16.

    ERIC Educational Resources Information Center

    Kaufmann, Felice, Comp.; Kent, Jeannette, Ed.

    Culled from ideas contributed by people attending conferences of the National Council of Teachers of English and by readers of "NOTES Plus" and "IDEAS Plus," the activities contained in this booklet are intended to promote the effective teaching of writing and literature. Teaching strategies offered in the first section of the…

  8. Research highlights: natural passive samplers--plants as biomonitors.

    PubMed

    Lin, Vivian S

    2015-06-01

    In the past decade, interest in boosting the collection of data on environmental pollutants while reducing costs has spurred intensive research into passive samplers, instruments that monitor the environment through the free flow of chemical species. These devices, although relatively inexpensive compared to active sampling technologies, are often tailored for collection of specific contaminants or monitoring of a single phase, typically water or air. Plants as versatile, natural passive samplers have gained increased attention in recent years due to their ability to absorb a diverse range of chemicals from the air, water, and soil. Trees, lichens, and other flora have evolved exquisite biological features to facilitate uptake of nutrients and water from the ground and conduct gas exchange on an extraordinary scale, making them excellent monitors of their surroundings. Sampling established plant specimens in a region also provides both historical and spatial data on environmental contaminants at relatively low cost in a non-invasive manner. This Highlight presents several recent publications that demonstrate how plant biomonitoring can be used to map the distribution of a variety of pollutants and identify their sources.

  9. Determining particle size distributions in the inhalable size range for wood dust collected by air samplers.

    PubMed

    Harper, Martin; Muller, Brian S; Bartolucci, Al

    2002-10-01

    In the absence of methods for determining particle size distributions in the inhalable size range with good discrimination, the samples collected by personal air sampling devices can only be characterized by their total mass. This parameter gives no information regarding the size distribution of the aerosol or the size-selection characteristics of different samplers in field use conditions. A method is described where the particles collected by a sampler are removed, suspended, and re-deposited on a mixed cellulose-ester filter, and examined by optical microscopy to determine particle aerodynamic diameters. This method is particularly appropriate to wood dust particles which are generally large and close to rectangular prisms in shape. Over 200 wood dust samples have been collected in three different wood-products industries, using the traditional closed-face polystyrene/acrylonitrile cassette, the Institute of Occupational Medicine inhalable sampler, and the Button sampler developed by the University of Cincinnati. A portion of these samples has been analyzed to determine the limitations of this method. Extensive quality control measures are being developed to improve the robustness of the procedure, and preliminary results suggest the method has an accuracy similar to that required of National Institute for Occupational Safety and Health (NIOSH) methods. The results should provide valuable insights into the collection characteristics of the samplers and the impact of these characteristics on comparison of sampler results to present and potential future limit values. The NIOSH Deep South Education and Research Center has a focus on research into hazards of the forestry and associated wood-products industry, and it is hoped to expand this activity in the future.

  10. A miniature flexible sampler for subsurface lunar exploration

    NASA Astrophysics Data System (ADS)

    Ling, Yun; Lu, Wei; Xiong, Pengwen; Song, Aiguo

    2016-06-01

    Lunar subsurface sampling is one of the critical technologies in the advancement of space exploration, and a lunar sampler with low weight, small volume, and low power consumption would significantly reduce the cost of space exploration. Thus, this paper proposes a novel miniature lunar sampler which adopts a flexible tape spring as its sampling arm. Compared with existing rigid-arm samplers, the proposed sampler has the merits of very low weight, reduced volume, and little power consumption. The mechanical design is illustrated in detail, the corresponding flexible kinematics model is built by considering flexibility compensation, and the working space of the sampler is depicted. The performance, e.g. the maximum acceleration, the maximum load capacity, and the sampling depth of the flexible arm, is analyzed through experiments, and each limit is established. In addition, the sampling process is demonstrated with the lab-based experiments, and the feasibility of the sampler is verified.

  11. Evaluation of three portable samplers for monitoring airborne fungi

    NASA Technical Reports Server (NTRS)

    Mehta, S. K.; Mishra, S. K.; Pierson, D. L.

    1996-01-01

    Airborne fungi were monitored at five sample sites with the Burkard portable, the RCS Plus, and the SAS Super 90 air samplers; the Andersen 2-stage impactor was used for comparison. All samplers were calibrated before being used simultaneously to collect 100-liter samples at each site. The Andersen and Burkard samplers retrieved equivalent volumes of airborne fungi; the SAS Super 90 and RCS Plus measurements did not differ from each other but were significantly lower than those obtained with the Andersen or Burkard samplers. Total fungal counts correlated linearly with Cladosporium and Penicillium counts. Alternaria species, although present at all sites, did not correlate with total count or with amounts of any other fungal genera. Sampler and location significantly influenced fungal counts, but no interactions between samplers and locations were found.

  12. Characterization of two passive air samplers for per- and polyfluoroalkyl substances.

    PubMed

    Ahrens, Lutz; Harner, Tom; Shoeib, Mahiba; Koblizkova, Martina; Reiner, Eric J

    2013-12-17

    Two passive air sampler (PAS) media were characterized under field conditions for the measurement of per- and polyfluoroalkyl substances (PFASs) in the atmosphere. The PASs, consisting of polyurethane foam (PUF) and sorbent-impregnated PUF (SIP) disks, were deployed for over one year in parallel with high volume active air samplers (HV-AAS) and low volume active air samplers (LV-AAS). Samples were analyzed for perfluoroalkyl carboxylic acids (PFCAs), perfluoroalkane sulfonic acids (PFSAs), fluorotelomer alcohols (FTOHs), fluorotelomer methacrylates (FTMACs), fluorotelomer acrylates (FTACs), perfluorooctane sulfonamides (FOSAs), and perfluorooctane sulfonamidoethanols (FOSEs). Sampling rates and the passive sampler medium (PSM)-air partition coefficient (KPSM-A) were calculated for individual PFASs. Sampling rates were similar for PFASs present in the gas phase and particle phase, and the linear sampling rate of 4 m(-3) d(-1) is recommended for calculating effective air sample volumes in the SIP-PAS and PUF-PAS for PFASs except for the FOSAs and FOSEs in the PUF-PAS. SIP disks showed very good performance for all tested PFASs while PUF disks were suitable only for the PFSAs and their precursors. Experiments evaluating the suitability of different isotopically labeled fluorinated depuration compounds (DCs) revealed that (13)C8-perfluorooctanoic acid (PFOA) was suitable for the calculation of site-specific sampling rates. Ambient temperature was the dominant factor influencing the seasonal trend of PFASs.

  13. Field evaluation of a passive personal air sampler for screening of PAH exposure in workplaces.

    PubMed

    Bohlin, Pernilla; Jones, Kevin C; Levin, Jan-Olof; Lindahl, Roger; Strandberg, Bo

    2010-07-08

    New sampling methods are needed to simplify and enable frequent monitoring of workers' exposure to polycyclic aromatic hydrocarbons (PAHs). The sampler needs to fulfil some key operational requirements for occupational exposure assessments: (i) be usable as a personal sampler; (ii) work over 8 h exposure time; (iii) sequester PAHs both in gas and particle phase, (iv) yield reliable estimates of air concentrations. Here, a new smaller design of the traditional polyurethane foam (PUF) passive air sampler (PAS) (i.e. a 'mini-PUF') was introduced and assessed against these requirements in sites with elevated PAH concentrations. The exposure times were 2 weeks and 8 hours. The obtained sampling rates (R-values) were not significantly different between gas phase (0.4-3.3 m(3) day(-1), 0.3-2.3 L min(-1)) and particle associated PAHs (0.5-1.9 m(3) day(-1), 0.4-1.3 L min(-1)). The accuracy in estimating air concentrations was within +/-25% from the active sampler for half of the PAHs for the mini-PUF under 8 h exposures. Significant correlations (p < 0.003) were found between personally deployed mini-PUFs and a co-deployed personal active sampling method. This together with the low costs and ease-of-use of the mini-PUF encourage application in exposure assessments.

  14. Comparison of water-quality samples collected by siphon samplers and automatic samplers in Wisconsin

    USGS Publications Warehouse

    Graczyk, David J.; Robertson, Dale M.; Rose, William J.; Steur, Jeffrey J.

    2000-01-01

    In small streams, flow and water-quality concentrations often change quickly in response to meteorological events. Hydrologists, field technicians, or locally hired stream ob- servers involved in water-data collection are often unable to reach streams quickly enough to observe or measure these rapid changes. Therefore, in hydrologic studies designed to describe changes in water quality, a combination of manual and automated sampling methods have commonly been used manual methods when flow is relatively stable and automated methods when flow is rapidly changing. Auto- mated sampling, which makes use of equipment programmed to collect samples in response to changes in stage and flow of a stream, has been shown to be an effective method of sampling to describe the rapid changes in water quality (Graczyk and others, 1993). Because of the high cost of automated sampling, however, especially for studies examining a large number of sites, alternative methods have been considered for collecting samples during rapidly changing stream conditions. One such method employs the siphon sampler (fig. 1). also referred to as the "single-stage sampler." Siphon samplers are inexpensive to build (about $25- $50 per sampler), operate, and maintain, so they are cost effective to use at a large number of sites. Their ability to collect samples representing the average quality of water passing though the entire cross section of a stream, however, has not been fully demonstrated for many types of stream sites.

  15. Retained gas sampler interim safety assessment

    SciTech Connect

    Pasamehmetoglu, K.O.; Miller, W.O.; Unal, C.; Fujita, R.K.

    1995-01-13

    This safety assessment addresses the proposed action to install, operate, and remove a Retained Gas Sampler (RGS) in Tank 101-SY at Hanford. Purpose of the RGS is to help characterize the gas species retained in the tank waste; the information will be used to refine models that predict the gas-producing behavior of the waste tank. The RGS will take samples of the tank from top to bottom; these samples will be analyzed for gas constituents. The proposed action is required as part of an evaluation of mitigation concepts for eliminating episodic gas releases that result in high hydrogen concentrations in the tank dome space.

  16. Development of syringe pump assisted headspace sampler.

    PubMed

    Go, Un Jeong; Eom, In-Yong

    2014-09-26

    This report describes a new platform for headspace sampling technique, i.e. a syringe pump assisted headspace sampler (SPHS). The stand type pump's syringe itself was used as a sealed sample vial and a needle trap device (NTD) was adopted as a miniaturized sorbent tube. The NTD was directly used to inject trapped VOCs into a gas chromatograph. The proposed sampler was designed to take a whole headspace volume instead of a portion of it so as to enhance easily the extraction efficiency. The performance of the SPHS-NTD system was evaluated and compared with the solid-phase microextraction (SPME) with a static headspace (HS) sampling technique. Calibration curves were obtained for aqueous TEX (toluene, ethylbenzene, and o-xylene) solutions in the concentration range of ∼0.1-45 ng/mL. The calculated limit of detections (LOD, S/N=3) for TEX were 0.13 ng/mL or less. This SPHS-NTD was successfully applied to analyze aqueous TEX in river water samples and showed highly good recovery ranged from 97.2% to 105.8% for all tested VOCs.

  17. Air sampler performance at Ford's farm range

    SciTech Connect

    Glissmeyer, J.A.; Johnston, J.W.

    1984-07-01

    An air-sampling system for a large-caliber depleted uranium (DU) penetrator firing range was tested. The objectives of the test were: to determine the bias between the monitoring readings and DU concentrations; and to determine if the target bay real-time monitor (RTM) tracks the decaying dust concentration. The test procedure was to operate total and respirable airborne particle samplers adjacent to the target bay monitors. A series of air samples was also taken after the test firings adjacent to the target bay RTM. Exhaust particle samples were analyzed for gross alpha, gross beta and uranium content. The target bay RTM correlated well (0.977) with the sequential samples. Average concentration from the RTM did not correlate with either the long-term total or respirable sampler DU concentrations. The monitor used to confirm a low dust concentration when the door is open correlated well (0.810) with the RTM; the other bay monitor did not. In the ventilation discharge, the long-term average monitor readings did not correlate with DU concentrations, probably due to levels near lower detection limits. Smearable surface-contamination samples showed highest contamination on the equipment, gravel floor and exhaust intake. The location air-intake contamination increased over the first 3 rounds. Contamination was reduced by a low-pressure water spray washdown to about the same concentration as often the second round, then remained at about twice the level. 2 references, 18 figures, 16 tables. (MF)

  18. OVERVIEW OF AN INTEGRATIVE SAMPLER FOR ...

    EPA Pesticide Factsheets

    Anthropogenic pollution is recognized as a global problem contributing to degradation of ecosystem quality, to loss of numerous plant and animal species, and to adverse impacts on human health. There is an increasing realization that a holistic hazard assessment of complex environmental contaminant mixtures requires data on the concentrations of hydrophilic organic contaminants as well. An approach to provide a time-weighted average (TWA) assessment is critical in understanding organism exposure to the complex mixture of pollutants present in the environment. A recently developed device, the polar organic chemical integrative sampler (POCIS), is designed to integratively sample the more polar waterborne organic chemicals. Laboratory trials and field deployments have demonstrated that the POCIS is very effective for sequestering hydrophilic chemicals such as antibiotics, hormones, other pharmaceutically derived chemicals, polar pesticides, surfactants, etc. Environmentally derived sample extracts from the integrative samplers are readily amenable for assays utilizing bio-indicator tests. An overview of the POCIS and selected environmental applications will be presented. The research focused on in the subtasks is the development and application of state-of the-art technologies to meet the needs of the public, Office of Water, and ORD in the area of Water Quality. Located In the subtasks are the various research projects being performed in support of this Task and

  19. COMPARISON OF INTEGRATED SAMPLERS FOR MASS AND COMPOSITION

    EPA Science Inventory

    The primary objective of EPA's Atlanta Supersites Project was to compare and evaluate a wide variety of samplers from time-integrated mass only monitors, to integrated and semi-continuous chemical speciation samplers, to single particle mass spectrometers. This paper will desc...

  20. Design and validation of a passive deposition sampler.

    PubMed

    Einstein, Stephanie A; Yu, Chang-Ho; Mainelis, Gediminas; Chen, Lung Chi; Weisel, Clifford P; Lioy, Paul J

    2012-09-01

    A new, passive particle deposition air sampler, called the Einstein-Lioy Deposition Sampler (ELDS), has been developed to fill a gap in passive sampling for near-field particle emissions. The sampler can be configured in several ways: with a protective hood for outdoor sampling, without a protective hood, and as a dust plate. In addition, there is an XRF-ready option that allows for direct sampling onto a filter-mounted XRF cartridge which can be used in conjunction with all configurations. A wind tunnel was designed and constructed to test the performance of different sampler configurations using a test dust with a known particle size distribution. The sampler configurations were also tested versus each other to evaluate whether or not the protective hood would affect the collected particle size distribution. A field study was conducted to test the sampler under actual environmental conditions and to evaluate its ability to collect samples for chemical analysis. Individual experiments for each configuration demonstrated precision of the sampler. The field experiment demonstrated the ability of the sampler to both collect mass and allow for the measurement of an environmental contaminant i.e. Cr(6+). The ELDS was demonstrated to be statistically not different for Hooded and Non-Hooded models, compared to each other and the test dust; thus, it can be used indoors and outdoors in a variety of configurations to suit the user's needs.

  1. Discipline-Based Art Education: A Curriculum Sampler.

    ERIC Educational Resources Information Center

    Alexander, Kay, Ed.; Day, Michael, Ed.

    This sampler was designed for art specialists and art museum educators with a basic understanding of teaching discipline-based art education content. The introduction offers a brief history of the Sampler and explains its intended purpose and use. Then 8 unit models with differing methodologies for relating art objectives to the four disciplines:…

  2. Design and validation of a passive deposition sampler

    PubMed Central

    Yu, Chang-Ho; Mainelis, Gediminas; Chen, Lung Chi; Weisel, Clifford P.; Lioy, Paul J.

    2014-01-01

    A new, passive particle deposition air sampler, called the Einstein–Lioy Deposition Sampler (ELDS), has been developed to fill a gap in passive sampling for near-field particle emissions. The sampler can be configured in several ways: with a protective hood for outdoor sampling, without a protective hood, and as a dust plate. In addition, there is an XRF-ready option that allows for direct sampling onto a filter-mounted XRF cartridge which can be used in conjunction with all configurations. A wind tunnel was designed and constructed to test the performance of different sampler configurations using a test dust with a known particle size distribution. The sampler configurations were also tested versus each other to evaluate whether or not the protective hood would affect the collected particle size distribution. A field study was conducted to test the sampler under actual environmental conditions and to evaluate its ability to collect samples for chemical analysis. Individual experiments for each configuration demonstrated precision of the sampler. The field experiment demonstrated the ability of the sampler to both collect mass and allow for the measurement of an environmental contaminant i.e. Cr6+. The ELDS was demonstrated to be statistically not different for Hooded and Non-Hooded models, compared to each other and the test dust; thus, it can be used indoors and outdoors in a variety of configurations to suit the user's needs. PMID:22820464

  3. Polydimethylsiloxane-based permeation passive air sampler. Part II: Effect of temperature and humidity on the calibration constants.

    PubMed

    Seethapathy, Suresh; Górecki, Tadeusz

    2010-12-10

    Polydimethylsiloxane (PDMS) has low permeability towards water vapour and low energy of activation of permeation towards volatile organic compounds (VOCs) when compared to many other polymers. Suitability of the material for use in permeation-type passive air samplers was tested as it theoretically should reduce uptake rate variations due to temperature changes and eliminate or reduce complications arising from sorbent saturation by water vapour. The calibration constants of a simple autosampler vial-based permeation passive sampler equipped with a PDMS membrane (Waterloo Membrane Sampler(®)) were determined for various analytes at different temperatures. From the data, the activation energy of permeation for PDMS towards the analytes was determined. The analytes studied belonged to various classes of compounds with wide ranging polarities, including n-alkanes, aromatic hydrocarbons, esters and alcohols. The results confirmed Arrhenius-type relationship between temperature and calibration constant and the energy of activation of permeation for PDMS ranged from -5kJ/mole for butylbenzene to -17kJ/mole for sec-butylacetate. Calibration constants of the samplers towards n-alkanes and aromatic hydrocarbons determined at humidities between 30% and 91% indicated no statistically significant variations in the uptake rate with changes in humidity for 9 of the 11 analytes studied. The results confirmed the suitability of the sampler for deployment in high humidity areas and under varying temperature conditions.

  4. Relation of Neurological Findings on Decoupling of Brain Activity from Limb Movement to Piagetian Ideas on the Origin of Thought

    ERIC Educational Resources Information Center

    Becker, Joe

    2006-01-01

    Neurological research has demonstrated that brain activity in animals originally dedicated to the production and regulation of physical activity can be decoupled from that physical activity. Furthermore, animals can use the brain activity in this new condition to achieve particular results such as moving a cursor on a screen. These findings are…

  5. Siting Samplers to Minimize Expected Time to Detection

    SciTech Connect

    Walter, Travis; Lorenzetti, David M.; Sohn, Michael D.

    2012-05-02

    We present a probabilistic approach to designing an indoor sampler network for detecting an accidental or intentional chemical or biological release, and demonstrate it for a real building. In an earlier paper, Sohn and Lorenzetti(1) developed a proof of concept algorithm that assumed samplers could return measurements only slowly (on the order of hours). This led to optimal detect to treat architectures, which maximize the probability of detecting a release. This paper develops a more general approach, and applies it to samplers that can return measurements relatively quickly (in minutes). This leads to optimal detect to warn architectures, which minimize the expected time to detection. Using a model of a real, large, commercial building, we demonstrate the approach by optimizing networks against uncertain release locations, source terms, and sampler characteristics. Finally, we speculate on rules of thumb for general sampler placement.

  6. Ideas Identified and Distributed through Project IDEA.

    ERIC Educational Resources Information Center

    American Alliance for Health, Physical Education, and Recreation, Washington, DC.

    This document contains ideas on a variety of subjects directed at the physical educator. The work was compiled by Project IDEA (Identify, Distribute, Exchange for Action). Topics include the following: (a) scheduling, (b) curriculum, (c) games, (d) specific courses, (e) life sports, (f) fitness, (g) adaptive Physical education, (h) course methods,…

  7. Monitoring solute fluxes: Integrating electrical resistivity with multi-compartment sampler techniques

    NASA Astrophysics Data System (ADS)

    Bloem, Esther; Fernandez, Perrine; French, Helen K.

    2016-04-01

    The impact of agriculture, industry, airport activities on soil and water quality is strongly influenced by soil heterogeneity. To improve risk assessment, monitoring, and treatment strategies, we require a better understanding of the effect of soil heterogeneity on contaminant movement and better methods for monitoring heterogeneous contaminated transport. Sufficient characterization of spatial and temporal distribution of contaminant transport requires measurements of water and solute fluxes at multiple locations with a high temporal resolution. During this presentation, we will show a newly developed instrument, which combines multi-compartment sampling with electrical resistivity measurements, to observe spatial and temporal fluxes of contaminants. Solute monitoring is often limited to observations of resident concentrations, while flux concentrations govern the movement of solutes in soils. Bloem et al. (2010) developed a multi-compartment sampler (MCS) which is capable of measuring fluxes at a high spatial resolution under natural conditions. The sampler is divided into 100 separate compartments of 31 by 31 mm. Flux data can be recorded at a high time resolution (every 5 minutes). Tracer leaching can be monitored by frequently sampling the collected leachate while leaving the sampler buried in situ. To optimize the monitoring of tracer leaching and measure real solute fluxes the multi-compartment sampler has been extended with 121 electrodes. The electrodes are mounted at each corner of each compartment to measure the electrical conductivity above each compartment while water percolates through the compartments. By using different electrode couples, the setup can also be used to image above the multi-compartment sampler. The instrument can be used for detailed studies both in the laboratory and in the field. For laboratory experiments a transparent column is used which fits perfect on top of the MCS. We present a selection of the integrated electrical

  8. Design and performance evaluation of a medium flow sampler for airborne brominated flame retardants (BFRs).

    PubMed

    Batterman, Stuart; Chen, Tze-Chun; Chernyak, Sergei; Godwin, Christopher

    2009-04-01

    Brominated flame retardants (BFRs), including polybrominated diphenyl ethers (PBDEs), have emerged as important and ubiquitous environmental pollutants, and there is a need to accurately measure airborne levels of these chemicals in both indoor and outdoor applications. We review and suggest performance criteria for BFR sampling systems, and then present the design of a new medium flow active sampler. The sampler uses a PTFE filter (47 mm, 1 microm pore size) in front of a polyurethane foam (PUF) adsorbent plug (22 mm dia, 76 mm length) with a nominal flow rate of 15 L min(-1) and a sampling period of one week, giving a sampling volume of 150 m(3). The sampler was evaluated using co-located systems to test precision, backup PUFs to test breakthrough, and distributed volume sampling to test linearity. Field experiments were conducted in five commercial buildings, one residence and outdoors at an urban site. A total of 20 BDE congeners were quantified. After appropriate cleaning of the PUF adsorbent, blank levels were negligible. Method detection limits (MDLs) were sufficiently low to quantify BDE congeners 17, 28, 71, 47, 100 and 99 in ambient air, and more than adequate to quantify these and other congeners in indoor air, where levels are typically much higher. The relative absolute deviation (RAD), based on distributed volume samples, ranged from 21% (BDE-71) to 81% (BDE-75) for indoor samples, and was somewhat higher for ambient samples. Only minimal breakthrough was detected in back-up samples, and over 80% of the samples had very low or negligible breakthrough. Humidity did not influence sampler performance. Overall, the medium-flow sampler can accurately measure PBDEs over a wide range of concentrations and applications.

  9. Field performance of the CATHIA-T sampler and two cyclones against the standard Cowled sampler for thoracic fiber concentrations.

    PubMed

    Lee, Eun Gyung; Nelson, John; Hintz, Patrick J; Joy, Gerald; Andrew, Michael E; Harper, Martin

    2010-07-01

    The performance of two thoracic samplers, the GK2.69 cyclone and the CATHIA-T sampler, and the GK3.51 cyclone was investigated in the field against the standard cowled sampler (current NIOSH 7400 method) to determine the effect of thoracic sampling. The CATHIA-T sampler and the GK2.69 cyclone were operated at 7 and 1.6 l min(-1), respectively. The GK3.51 sampler is related to the GK2.69 cyclone, but designed to give a thoracic cut at a flow rate of 3.2 l min(-1). A total of 136 area samples were obtained from a tremolitic talc processing mill and 148 area samples were obtained within a quarry in which metamorphosed volcanic rocks were being crushed for construction stone. Sample slides were prepared using the dimethyl formamide/Euparal technique and relocatable cover slips. NIOSH 7400 'A' counting rules were used to examine fibers. Additionally, counters were asked to record the number of fibers where a fiber meets the 'A' rules and is wider than 3-mum physical diameter in order to estimate the proportion of extra-thoracic fibers. A few slides from each sampler type were randomly selected and fiber widths for those fibers satisfying the counting rules were measured to determine median width ratios of each thoracic sampler to the cowled sampler. Overall, the combined results of this study and the previous study by the same authors (Lee et al., 2008) showed lower fiber concentrations for the CATHIA-T sampler and higher concentrations for the GK2.69 cyclone and the GK3.51 cyclone compared to the standard cowled sampler. The proportion of extra-thoracic fibers (>3-mum physical diameter) on the filters collected with each type of thoracic samplers was comparable to the proportion of such fibers collected with the cowled sampler. The most consistent result over this study and our previous study is that both cyclones gave higher fiber concentrations than the CATHIA-T sampler. However, the estimated width ratios of each cyclone type to the cowled sampler were similar to or

  10. Calibration of nylon organic chemical integrative samplers and sentinel samplers for quantitative measurement of pulsed aquatic exposures.

    PubMed

    Morrison, Shane A; Belden, Jason B

    2016-06-03

    Environmental exposures often occur through short, pulsed events; therefore, the ability to accurately measure these toxicologically-relevant concentrations is important. Three different integrative passive sampler configurations were evaluated under different flow and pulsed exposure conditions for the measurement of current-use pesticides (n=19), polyaromatic hydrocarbons (n=10), and personal care products (n=5) spanning a broad range of hydrophobicities (log Kow 1.5-7.6). Two modified POCIS-style samplers were investigated using macroporous nylon mesh membranes (35μm pores) and two different sorbent materials (i.e. Oasis HLB and Dowex Optipore L-493). A recently developed design, the Sentinel Sampler (ABS Materials), utilizing Osorb media enclosed within stainless steel mesh (145μm pores), was also investigated. Relatively high sampling rates (Rs) were achieved for all sampler configurations during the short eight-day exposure (4300-27mL/d). Under flow conditions, median Rs were approximately 5-10 times higher for POCIS-style samplers and 27 times higher for Sentinel Samplers, as compared to static conditions. The ability of samplers to rapidly measure hydrophobic contaminants may be a trade off with increased flow dependence. Analyte accumulation was integrative under pulsed and continuous exposures for POCIS-style samplers with mean difference between treatments of 11% and 33%; however, accumulation into Sentinel Samplers was more variable. Collectively, results show that reducing membrane limitations allows for rapid, integrative accumulation of a broad range of analytes even under pulsed exposures. As such, these sampler designs may be suitable for monitoring environmental substances that have short aquatic half-lives.

  11. Gibbs Recursive Sampler: finding transcription factor binding sites.

    PubMed

    Thompson, William; Rouchka, Eric C; Lawrence, Charles E

    2003-07-01

    The Gibbs Motif Sampler is a software package for locating common elements in collections of biopolymer sequences. In this paper we describe a new variation of the Gibbs Motif Sampler, the Gibbs Recursive Sampler, which has been developed specifically for locating multiple transcription factor binding sites for multiple transcription factors simultaneously in unaligned DNA sequences that may be heterogeneous in DNA composition. Here we describe the basic operation of the web-based version of this sampler. The sampler may be acces-sed at http://bayesweb.wadsworth.org/gibbs/gibbs.html and at http://www.bioinfo.rpi.edu/applications/bayesian/gibbs/gibbs.html. An online user guide is available at http://bayesweb.wadsworth.org/gibbs/bernoulli.html and at http://www.bioinfo.rpi.edu/applications/bayesian/gibbs/manual/bernoulli.html. Solaris, Solaris.x86 and Linux versions of the sampler are available as stand-alone programs for academic and not-for-profit users. Commercial licenses are also available. The Gibbs Recursive Sampler is distributed in accordance with the ISCB level 0 guidelines and a requirement for citation of use in scientific publications.

  12. Evaluation of portable air samplers for monitoring airborne culturable bacteria

    NASA Technical Reports Server (NTRS)

    Mehta, S. K.; Bell-Robinson, D. M.; Groves, T. O.; Stetzenbach, L. D.; Pierson, D. L.

    2000-01-01

    Airborne culturable bacteria were monitored at five locations (three in an office/laboratory building and two in a private residence) in a series of experiments designed to compare the efficiency of four air samplers: the Andersen two-stage, Burkard portable, RCS Plus, and SAS Super 90 samplers. A total of 280 samples was collected. The four samplers were operated simultaneously, each sampling 100 L of air with collection on trypticase soy agar. The data were corrected by applying positive hole conversion factors for the Burkard portable, Andersen two-stage, and SAS Super 90 air samplers, and were expressed as log10 values prior to statistical analysis by analysis of variance. The Burkard portable air sampler retrieved the highest number of airborne culturable bacteria at four of the five sampling sites, followed by the SAS Super 90 and the Andersen two-stage impactor. The number of bacteria retrieved by the RCS Plus was significantly less than those retrieved by the other samplers. Among the predominant bacterial genera retrieved by all samplers were Staphylococcus, Bacillus, Corynebacterium, Micrococcus, and Streptococcus.

  13. Laboratory evaluation of the CIP 10 personal dust sampler.

    PubMed

    Gero, A; Tomb, T

    1988-06-01

    The "capteur individuel de poussiere" CIP 10 personal dust sampler--developed by the Centre d'Etudes et Recherches de Charbonnages de France (CERCHAR) research organization--is a small, quiet, lightweight unit which samples at a flow rate of 10 L/min. It is a three-stage sampler, using two stages to remove nonrespirable dust particles and one stage to collect the respirable fraction. Airflow through the sampler is induced by the third stage, which is a rotating collector cup that contains a fine grade sponge. Laboratory tests were conducted in a dust chamber using aerosols of Arizona road dust, coal dust and silica dust. Aerosol concentrations measured with the CIP 10 were compared to those measured with the coal mine dust personal sampler unit used in the United States. The results of this study showed that aerosol concentrations measured with the CIP 10 were linearly related to those obtained with the coal mine dust personal sampler. The relationship, however, was dependent on preselector configuration and aerosol characteristics. The collection medium allows some small particles (less than 3 microns) to pass through the sampler without being collected. As much as 13% (by weight) of the aerosol that penetrated through the preseparating stages was exhausted from the sampler.

  14. Temporal variations of cyclic and linear volatile methylsiloxanes in the atmosphere using passive samplers and high-volume air samplers.

    PubMed

    Ahrens, Lutz; Harner, Tom; Shoeib, Mahiba

    2014-08-19

    Cyclic and linear volatile methylsiloxanes (cVMSs and lVMSs, respectively) were measured in ambient air over a period of over one year in Toronto, Canada. Air samples were collected using passive air samplers (PAS) consisting of sorbent-impregnated polyurethane foam (SIP) disks in parallel with high volume active air samplers (HV-AAS). The average difference between the SIP-PAS derived concentrations in air for the individual VMSs and those measured using HV-AAS was within a factor of 2. The air concentrations (HV-AAS) ranged 22-351 ng m(-3) and 1.3-15 ng m(-3) for ΣcVMSs (D3, D4, D5, D6) and ΣlVMSs (L3, L4, L5), respectively, with decamethylcyclopentasiloxane (D5) as the dominant compound (∼75% of the ΣVMSs). Air masses arriving from north to northwest (i.e., less populated areas) were significantly less contaminated with VMSs compared to air arriving from the south that are impacted by major urban and industrial areas in Canada and the U.S. (p < 0.05). In addition, air concentrations of ΣcVMSs were lower during major snowfall events (on average, 73 ng m(-3)) in comparison to the other sampling periods (121 ng m(-3)). Ambient temperature had a small influence on the seasonal trend of VMS concentrations in air, except for dodecamethylcyclohexasiloxane (D6), which was positively correlated with the ambient temperature (p < 0.001).

  15. Animal Activities: A Handbook of Humane Education Ideas, Resources and Materials for Elementary School Teachers. First Edition.

    ERIC Educational Resources Information Center

    Nelson, Dottie, Comp.; Ryther, Sherry, Comp.

    The information and activities in this handbook are designed to help children focus on the special needs that animals (wild and domestic) have and what children can do to help meet these needs. The following are included: (1) activities and games on the care of domestic animals; (2) instructions for making a book which shows the similarities…

  16. Web-Based Interactive Video Vignettes Create a Personalized Active Learning Classroom for Introducing Big Ideas in Introductory Biology

    ERIC Educational Resources Information Center

    Wright, L. Kate; Newman, Dina L.; Cardinale, Jean A.; Teese, Robert

    2016-01-01

    The typical "flipped classroom" delivers lecture material in video format to students outside of class in order to make space for active learning in class. But why give students passive material at all? We are developing a set of high-quality online educational materials that promote active, hands-on science learning to aid in teaching…

  17. Efficiency tests of samplers for microbiological aerosols, a review

    NASA Technical Reports Server (NTRS)

    Henningson, E.; Faengmark, I.

    1984-01-01

    To obtain comparable results from studies using a variety of samplers of microbiological aerosols with different collection performances for various particle sizes, methods reported in the literature were surveyed, evaluated, and tabulated for testing the efficiency of the samplers. It is concluded that these samplers were not thoroughly tested, using reliable methods. Tests were conducted in static air chambers and in various outdoor and work environments. Results are not reliable as it is difficult to achieve stable and reproducible conditions in these test systems. Testing in a wind tunnel is recommended.

  18. The Collector Head Of Viking Lander 1's Surface Sampler

    NASA Technical Reports Server (NTRS)

    1976-01-01

    The collector head of Viking l's surface sampler is full of Martian soil destined for the gas chromatograph mass spectrometer, the instrument which analyzes the surface material for the presence of organic molecules. The material was scooped out of the surface on August 3, but the sampler arm stopped operating while transporting it to the instrument. The Martian soil will be deposited into the instrument's processor today. The surface sampler is operating properly, but the cause of last week's problem is not yet known. This picture, taken Monday (August 9), was made for operational purposes, focusing on the collector head. Hence, the out-of-focus view of the Martian surface.

  19. Idea Swap: The Best Ideas Come from Teachers Like You!

    ERIC Educational Resources Information Center

    Instructor, 2006

    2006-01-01

    This article presents several activities and teaching ideas shared by teachers. One teacher shared how an Egyptian mummy-making activity can be a great hands-on learning through time. Another teacher shared how a bowl filled with popcorn kernels has made it easy for her to get the attention of her students.

  20. Great Constitutional Ideas: Justice, Equality, and Property.

    ERIC Educational Resources Information Center

    Starr, Isidore

    1987-01-01

    Examines the ideas of justice, equality, and property as they are represented in the Declaration of Independence, the U.S. Constitution and the Bill of Rights. Discusses how these ideas affect the way public schools operate and the lessons educators teach or don't teach about our society. Includes ideas for classroom activities. (JDH)

  1. 7 CFR 800.185 - Duties of official personnel and warehouse samplers.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 7 2010-01-01 2010-01-01 false Duties of official personnel and warehouse samplers... official personnel and warehouse samplers. (a) General. Official personnel and warehouse samplers shall... of § 800.161. (d) Scope of operations. Official personnel and warehouse samplers shall operate...

  2. A high-yield sampler for toxicological characterization of complex mixtures in combustion effluents.

    PubMed Central

    Kruzel, E L; Lafleur, A L; Braun, A G; Longwell, J P; Thilly, W G; Peters, W A

    1991-01-01

    Combustion sampling for toxicological assessment often requires that large (greater than 100 mg) lots of complex organic mixtures of wide volatility range be rapidly recovered from high temperature gases without contamination. A new sampler, meeting these criteria for studies of public health interest, has been developed and demonstrated. The device provides high sampling rates and intimate contacting of the samples stream with large volumes of a well-cooled, liquid solvent, dichloromethane (DCM). This promotes rapid organics dissolution from carrier gas and particulates and prompt dilution and quenching of the resulting solution, resulting in high organics collection efficiencies with minimal DCM losses. Solvent separation then remits large quantities of concentrated organics for chemical analysis and toxicological testing. One- to seven-hour interrogations of in-flame, post-flame, and flue gas regions gave 50- to 250-mg yields of complex organic mixtures. In side-by-side sampling of combustion exhaust, the DCM sampler provided higher yields of DCM solubles (identified with complex organic mixtures) and of S. typhimuirim mutagens (active without exogenous metabolizing agents) than did a filter/polymeric sorbent bed sampling train. The new sampler also collects polar and high volatile hydrocarbons such as benzaheyde, pentadiyne, m- and p-diethynyl-benzene, and 1-hexen-3,5-diyne. Nitration of naphthalene and pyrene in DCM solution (1 mg/mL each) was less than 1 part in 10(7) after a 345-min exposure to a bubbling flow of moist N2/air mixture (1:1 v/v) containing 107 ppm NO and 1.5 ppm NO2, indicating that for these condition a DCM sampler should resist artifactual nitration of aromatics. However, because of the very high bacterial mutagenicity of some nitroaromatics and the wide range of sampling conditions of environmental interest, nitration and all artifacts must still be scrutinized when using the DCM sampler. The DCM sampler is expected to contribute to public

  3. Creative Teaching Ideas.

    ERIC Educational Resources Information Center

    Chapman, Patricia H., Comp.; And Others

    This book contains 172 creative teaching ideas pertaining to various subject areas and aspects of business education. Most of the ideas included are intended for use in secondary and postsecondary classrooms; however, a few are applicable at all grade levels. The teaching ideas are organized according to the following subject areas/topics:…

  4. Five Big Ideas

    ERIC Educational Resources Information Center

    Morgan, Debbie

    2012-01-01

    Designing quality continuing professional development (CPD) for those teaching mathematics in primary schools is a challenge. If the CPD is to be built on the scaffold of five big ideas in mathematics, what might be these five big ideas? Might it just be a case of, if you tell me your five big ideas, then I'll tell you mine? Here, there is…

  5. The Idea Box.

    ERIC Educational Resources Information Center

    National Association for the Education of Young Children, Washington, DC.

    Five pamphlets offer helpful ideas and instructions on teacher planning, learning environments, teaching with nature, a creative curriculum, and ideas for administrators in "The Idea Box," compiled by members of the Austin Association for the Education of Young Children. Each pamphlet contains useful information for working with young children.…

  6. Evaluation of particulate air samplers for airborne aflatoxin B1

    SciTech Connect

    Silas, J.C.; Harrison, M.A.; Carpenter, J.A.

    1986-01-01

    Five air samplers (Millipore, all-glass impinger, centrifugal, Andersen, and absorbent cotton) were evaluated for their ability to collect airborne grain particles contaminated with aflatoxin B1. Corn dust containing 100 micrograms aflatoxin B1/g was aerosolized within a containment system. Each device sampled 100 I air, thus exchanging the air in the chamber two times. Aflatoxin B1 was extracted from all sampling matrices and was detected and quantitated with thin-layer chromatography and scanning fluorodensitometry. The highest efficiency was obtained with the Millipore sampler, while the efficiencies of the centrifugal and the cotton samplers were almost identical. Efficiency of an Andersen was less, with no toxin recovered from an all-glass impinger. Measurement of particle size was accomplished with the Andersen sampler.

  7. Fluidized Bed Asbestos Sampler Design and Testing

    SciTech Connect

    Karen E. Wright; Barry H. O'Brien

    2007-12-01

    A large number of samples are required to characterize a site contaminated with asbestos from previous mine or other industrial operations. Current methods, such as EPA Region 10’s glovebox method, or the Berman Elutriator method are time consuming and costly primarily because the equipment is difficult to decontaminate between samples. EPA desires a shorter and less costly method for characterizing soil samples for asbestos. The objective of this was to design and test a qualitative asbestos sampler that operates as a fluidized bed. The proposed sampler employs a conical spouted bed to vigorously mix the soil and separate fine particulate including asbestos fibers on filters. The filters are then analyzed using transmission electron microscopy for presence of asbestos. During initial testing of a glass prototype using ASTM 20/30 sand and clay fines as asbestos surrogates, fine particulate adhered to the sides of the glass vessel and the tubing to the collection filter – presumably due to static charge on the fine particulate. This limited the fines recovery to ~5% of the amount added to the sand surrogate. A second prototype was constructed of stainless steel, which improved fines recovery to about 10%. Fines recovery was increased to 15% by either humidifying the inlet air or introducing a voltage probe in the air space above the sample. Since this was not a substantial improvement, testing using the steel prototype proceeded without using these techniques. Final testing of the second prototype using asbestos suggests that the fluidized bed is considerably more sensitive than the Berman elutriator method. Using a sand/tremolite mixture with 0.005% tremolite, the Berman elutriator did not segregate any asbestos structures while the fluidized bed segregated an average of 11.7. The fluidized bed was also able to segregate structures in samples containing asbestos at a 0.0001% concentration, while the Berman elutriator method did not detect any fibers at this

  8. The MAGIC meteoric smoke particle sampler

    NASA Astrophysics Data System (ADS)

    Hedin, Jonas; Giovane, Frank; Waldemarsson, Tomas; Gumbel, Jörg; Blum, Jürgen; Stroud, Rhonda M.; Marlin, Layne; Moser, John; Siskind, David E.; Jansson, Kjell; Saunders, Russell W.; Summers, Michael E.; Reissaus, Philipp; Stegman, Jacek; Plane, John M. C.; Horányi, Mihály

    2014-10-01

    Between a few tons to several hundred tons of meteoric material enters the Earth's atmosphere each day, and most of this material is ablated and vaporized in the 70-120 km altitude region. The subsequent chemical conversion, re-condensation and coagulation of this evaporated material are thought to form nanometre sized meteoric smoke particles (MSPs). These smoke particles are then subject to further coagulation, sedimentation and global transport by the mesospheric circulation. MSPs have been proposed as a key player in the formation and evolution of ice particle layers around the mesopause region, i.e. noctilucent clouds (NLC) and polar mesosphere summer echoes (PMSE). MSPs have also been implicated in mesospheric heterogeneous chemistry to influence the mesospheric odd oxygen/odd hydrogen (Ox/HOx) chemistry, to play an important role in the mesospheric charge balance, and to be a significant component of stratospheric aerosol and enhance the depletion of O3. Despite their apparent importance, little is known about the properties of MSPs and none of the hypotheses can be verified without direct evidence of the existence, altitude and size distribution, shape and elemental composition. The aim of the MAGIC project (Mesospheric Aerosol - Genesis, Interaction and Composition) was to develop an instrument and analysis techniques to sample for the first time MSPs in the mesosphere and return them to the ground for detailed analysis in the laboratory. MAGIC meteoric smoke particle samplers have been flown on several sounding rocket payloads between 2005 and 2011. Several of these flights concerned non-summer mesosphere conditions when pure MSP populations can be expected. Other flights concerned high latitude summer conditions when MSPs are expected to be contained in ice particles in the upper mesosphere. In this paper we present the MAGIC project and describe the MAGIC MSP sampler, the measurement procedure and laboratory analysis. We also present the attempts to

  9. Validation of parachlorobenzotrifluoride, benzotrifluoride, and monochlorotoluene on diffusive samplers.

    PubMed

    Yost, C; Harper, M

    2000-01-01

    Three solvents (OXSOL 10, monochlorotoluene or mixed isomers of 1- chloro-2-methyl benzene and 1-chloro-4-methyl benzene; OXSOL 100, parachlorobenzotrifluoride or 1-chloro-4-(trifluoromethyl) benzene; and OXSOL 2000, benzotrifluoride or trifluoromethyl benzene) produced by Occidental Chemical Corporation (Niagara Falls, NY) were considered as candidates for SKC, Inc.'s on-going diffusive sampler validation program. The 575-series diffusive sampler contains coconut-shell charcoal (575-001) or Anasorb 747 (575-002). Both samplers were used in this study. Desorption efficiency was tested at loadings equivalent to eight-hour time-weighted average (TWA) exposures to 0.01-2 times the Occidental Chemical Corporation in-house limit values (respectively: 50 ppm, 25 ppm, and 100 ppm,. All results met the National Institute for Occupational Safety and Health (NIOSH) criteria of > 75 percent, and, except for the lower loadings of parachlorobenzotrifluoride, the results were in the range of 90-110 percent. The calculated uptake rates were verified for different periods of exposure, up to eight hours, and found to be within 5 percent of the calculated for all three compounds on both samplers. A detailed comparison of the results from different time periods indicated no significant reverse diffusion effects for any combination of sampler and analyte. Samplers exposed to standard atmospheres of each compound were stored for three weeks at ambient temperatures and reanalyzed with results between 94 and 107 percent of expected. Based on full validation of samplers for the lower homologue (benzene), the bi-level theory of sample validation as endorsed by international validation protocols establishes this as a complete validation of the featured samplers for sampling vapors of these chemicals in air.

  10. Characteristics and Sampling Efficiencies of OMNI 3000 Aerosol Samplers

    DTIC Science & Technology

    2006-10-01

    they impact on walls and on the slit and not reaching the inside of the contactor, compared to PSL particles that bounce off surfaces. The Omni...SAMPLING EFFICIENCIES OF OMNI 3000 AEROSOL SAMPLERS Jana S. Kesavan RESEARCH AND TECHNOLOGY DIRECTORATE Deborah R. Schepers MITRETEK SYSTEMS, INC. Falls...2006 Final Feb 2006 - Mar 2006 4. TITLE AND SUBTITLE 5a. CONTRACT NUMBER Characteristics and Sampling Efficiencies of Omni 3000 Aerosol Samplers 5b

  11. Debunking the Idea that Ligand Efficiency Indices Are Superior to pIC50 as QSAR Activities.

    PubMed

    Sheridan, Robert P

    2016-11-28

    Several papers have appeared in which a ligand efficiency index instead of pIC50 is used as the activity in QSAR. The claim is that better fits and predictions are obtained with ligand efficiency. We show on both public-domain and in-house data sets that the apparent superiority is a statistical artifact that occurs when ligand efficiency indices are correlated with the physical property included in their definition (number of non-hydrogens, ALOGP, TPSA, etc.) and when the property is easier to predict than the original pIC50.

  12. Influence of sampler configuration on the uptake kinetics of a passive air sampler.

    PubMed

    Zhang, Xianming; Wong, Cindy; Lei, Ying D; Wania, Frank

    2012-01-03

    Passive air samplers (PAS) are simple and cost-effective tools to monitor semivolatile organic compounds in air. Chemical uptake occurs by molecular diffusion from ambient air to a passive sampling medium (PSM). Previous calibration studies indicate that even for the same type of PAS, passive air sampling rates (R, m(3)(air)/d) can be highly variable due to the influence of a number of factors. Earlier studies mainly focused on factors (e.g., wind speed and temperature) influencing R via the kinetic resistance posed by the air boundary layer surrounding the PSM because that layer was deemed to be the main factor determining the uptake kinetics. Whereas recent calibration studies suggest that the PAS configuration can influence R, so far few studies have specifically focused on this factor. In this study, with the objective to understand the effect of PAS configurations on R, we applied a gravimetrical approach to study the kinetics of water vapor uptake from indoor air by silica gel placed inside cylindrical PAS of various configurations. We also conducted an indoor calibration for polychlorinated biphenyls on the same type of PAS using XAD-resin as the PSM. R was found to be proportional to the interfacial transfer area of the PSM but not the amount of the PSM because chemicals mainly accumulated in the outer layer of the PSM during the deployment time of the PAS. The sampler housing and the PSM can introduce kinetic resistance to chemical uptake as indicated by changes in R caused by positioning the PSM at different distances from the opening of the sampler housing and by using PSM of different diameters. Information gained from this study is useful for optimizing the PAS design with the objective to reduce the material and shipping costs without sacrificing sampling efficiency.

  13. An Evaluation of Polycyclic Aromatic Hydrocarbon Uptake into Polyethylene Samplers

    NASA Astrophysics Data System (ADS)

    Martynowych, D. J.; McDonough, C.; Lohmann, R.

    2013-12-01

    Polyethylene passive samplers (PEs) are simple reliable tools that have been widely used in the detection of hydrophobic organic compounds. Thick (>200μm or greater) PEs have important applications to specific sampling scenarios including biological assays, deployment on ships and aircraft (towing) and long term sampling, however little is known about their uptake kinetics. This study aimed to develop an accurate understanding of the uptake kinetics of these thick PEs. PE passive samplers of equal surface area, but differing thicknesses were co-deployed in the surface water and air of lower Narragansett Bay in 2013 to characterize differences in their uptake of polycyclic aromatic hydrocarbons (PAHs). PE samplers of approximately 50, 800, and 1600μm thicknesses were analyzed for 38 parent and alkylated PAHs, with replicate sampler reproducibility mostly within 25%. A number of smaller PAHs (typically those with a molecular weight less than 180) analyzed over a 4 week deployment equilibrated, while the larger molecules remained in the linear or curve linear uptake stages. Results from a second, 24 week deployment of 800μm and 1600μm samplers in surface waters suggest that all 38 compounds studied remained in the linear uptake stage. The PE-weight normalized concentration ratio of 1600μm to 800μm sampler fell below 1 for all analytes, implying equilibrium had not been established.

  14. Understanding the rates of nonpolar organic chemical accumulation into passive samplers deployed in the environment: Guidance for passive sampler deployments.

    PubMed

    Apell, Jennifer N; Tcaciuc, A Patricia; Gschwend, Philip M

    2016-07-01

    Polymeric passive samplers have become a common method for estimating freely dissolved concentrations in environmental media. However, this approach has not yet been adopted by investigators conducting remedial investigations of contaminated environmental sites. Successful adoption of this sampling methodology relies on an understanding of how passive samplers accumulate chemical mass as well as developing guidance for the design and deployment of passive samplers. Herein, we outline the development of a simple mathematical relationship of the environmental, polymer, and chemical properties that control the uptake rate. This relationship, called a timescale, is then used to illustrate how each property controls the rate of equilibration in samplers deployed in the water or in the sediment. Guidance is also given on how to use the timescales to select an appropriate polymer, deployment time, and suite of performance reference compounds. Integr Environ Assess Manag 2016;12:486-492. © 2015 SETAC.

  15. A Gibbs sampler for multivariate linear regression

    NASA Astrophysics Data System (ADS)

    Mantz, Adam B.

    2016-04-01

    Kelly described an efficient algorithm, using Gibbs sampling, for performing linear regression in the fairly general case where non-zero measurement errors exist for both the covariates and response variables, where these measurements may be correlated (for the same data point), where the response variable is affected by intrinsic scatter in addition to measurement error, and where the prior distribution of covariates is modelled by a flexible mixture of Gaussians rather than assumed to be uniform. Here, I extend the Kelly algorithm in two ways. First, the procedure is generalized to the case of multiple response variables. Secondly, I describe how to model the prior distribution of covariates using a Dirichlet process, which can be thought of as a Gaussian mixture where the number of mixture components is learned from the data. I present an example of multivariate regression using the extended algorithm, namely fitting scaling relations of the gas mass, temperature, and luminosity of dynamically relaxed galaxy clusters as a function of their mass and redshift. An implementation of the Gibbs sampler in the R language, called LRGS, is provided.

  16. Permeation absorption sampler with multiple detection

    DOEpatents

    Zaromb, Solomon

    1990-01-01

    A system for detecting analytes in air or aqueous systems includes a permeation absorption preconcentrator sampler for the analytes and analyte detectors. The preconcentrator has an inner fluid-permeable container into which a charge of analyte-sorbing liquid is intermittently injected, and a fluid-impermeable outer container. The sample is passed through the outer container and around the inner container for trapping and preconcentrating the analyte in the sorbing liquid. The analyte can be detected photometrically by injecting with the sorbing material a reagent which reacts with the analyte to produce a characteristic color or fluorescence which is detected by illuminating the contents of the inner container with a light source and measuring the absorbed or emitted light, or by producing a characteristic chemiluminescence which can be detected by a suitable light sensor. The analyte can also be detected amperometrically. Multiple inner containers may be provided into which a plurality of sorbing liquids are respectively introduced for simultaneously detecting different analytes. Baffles may be provided in the outer container. A calibration technique is disclosed.

  17. Transient digitizer with displacement current samplers

    DOEpatents

    McEwan, Thomas E.

    1996-01-01

    A low component count, high speed sample gate, and digitizer architecture using the sample gates is based on use of a signal transmission line, a strobe transmission line and a plurality of sample gates connected to the sample transmission line at a plurality of positions. The sample gates include a strobe pickoff structure near the strobe transmission line which generates a charge displacement current in response to propagation of the strobe signal on the strobe transmission line sufficient to trigger the sample gate. The sample gate comprises a two-diode sampling bridge and is connected to a meandered signal transmission line at one end and to a charge-holding cap at the other. The common cathodes are reverse biased. A voltage step is propagated down the strobe transmission line. As the step propagates past a capacitive pickoff, displacement current i=c(dv/dT), flows into the cathodes, driving the bridge into conduction and thereby charging the charge-holding capacitor to a value related to the signal. A charge amplifier converts the charge on the charge-holding capacitor to an output voltage. The sampler is mounted on a printed circuit board, and the sample transmission line and strobe transmission line comprise coplanar microstrips formed on a surface of the substrate. Also, the strobe pickoff structure may comprise a planar pad adjacent the strobe transmission line on the printed circuit board.

  18. Transient digitizer with displacement current samplers

    DOEpatents

    McEwan, T.E.

    1996-05-21

    A low component count, high speed sample gate, and digitizer architecture using the sample gates is based on use of a signal transmission line, a strobe transmission line and a plurality of sample gates connected to the sample transmission line at a plurality of positions. The sample gates include a strobe pickoff structure near the strobe transmission line which generates a charge displacement current in response to propagation of the strobe signal on the strobe transmission line sufficient to trigger the sample gate. The sample gate comprises a two-diode sampling bridge and is connected to a meandered signal transmission line at one end and to a charge-holding cap at the other. The common cathodes are reverse biased. A voltage step is propagated down the strobe transmission line. As the step propagates past a capacitive pickoff, displacement current i=c(dv/dT), flows into the cathodes, driving the bridge into conduction and thereby charging the charge-holding capacitor to a value related to the signal. A charge amplifier converts the charge on the charge-holding capacitor to an output voltage. The sampler is mounted on a printed circuit board, and the sample transmission line and strobe transmission line comprise coplanar microstrips formed on a surface of the substrate. Also, the strobe pickoff structure may comprise a planar pad adjacent the strobe transmission line on the printed circuit board. 16 figs.

  19. A Model Using Local Weather Data to Determine the Effective Sampling Volume for PCB Congeners Collected on Passive Air Samplers

    PubMed Central

    2016-01-01

    We have developed and evaluated a mathematical model to determine the effective sampling volumes (Veff) of PCBs and similar compounds captured using polyurethane foam passive air samplers (PUF–PAS). We account for the variability in wind speed, air temperature, and equilibrium partitioning over the course of the deployment of the samplers. The model, provided as an annotated Matlab script, predicts the Veff as a function of physical-chemical properties of each compound and meteorology from the closest Integrated Surface Database (ISD) data set obtained through NOAA’s National Centers for Environmental Information (NCEI). The model was developed to be user-friendly, only requiring basic Matlab knowledge. To illustrate the effectiveness of the model, we evaluated three independent data sets of airborne PCBs simultaneously collected using passive and active samplers: at sites in Chicago, Lancaster, UK, and Toronto, Canada. The model provides Veff values comparable to those using depuration compounds and calibration against active samplers, yielding an average congener specific concentration method ratio (active/passive) of 1.1 ± 1.2. We applied the model to PUF–PAS samples collected in Chicago and show that previous methods can underestimate concentrations of PCBs by up to 40%, especially for long deployments, deployments conducted under warming conditions, and compounds with log Koa values less than 8. PMID:26963482

  20. A Simple and Disposable Sampler for Inhalable Aerosol

    PubMed Central

    L’Orange, Christian; Anderson, Kimberly; Sleeth, Darrah; Anthony, T. Renée; Volckens, John

    2016-01-01

    The state-of-the-art for personal sampling for inhalable aerosol hazards is constrained by issues of sampler cost and complexity; these issues have limited the adoption and use of some samplers by practicing hygienists. Thus, despite the known health effects of inhalable aerosol hazards, personal exposures are routinely assessed for only a small fraction of the at-risk workforce. To address the limitations of current technologies for inhalable aerosol sampling, a disposable inhalable aerosol sampler was developed and evaluated in the laboratory. The new sampler is designed to be less expensive and simpler to use than existing technologies. The sampler incorporates a lightweight internal capsule fused to the sampling filter. This capsule-filter assembly allows for the inclusion of particles deposited on the internal walls and inlet, thus minimizing the need to wash or wipe the interior sampling cassette when conducting gravimetric analyses. Sampling efficiency and wall losses were tested in a low-velocity wind tunnel with particles ranging from 9.5 to 89.5 μm. The results were compared to the proposed low-velocity inhalability criterion as well as published data on the IOM sampler. Filter weight stability and time-to-equilibrium were evaluated as these factors affect the practicality of a design. Preliminary testing of the new sampler showed good agreement with both the IOM and the proposed low-velocity inhalability curve. The capsule and filter assemblies reached equilibrium within 25h of manufacturing when conditioned at elevated temperatures. After reaching equilibrium, the capsule-filter assemblies were stable within 0.01mg. PMID:26467335

  1. Improvement and characterization of an automatic aerosol sampler for remote (glacier) sites

    NASA Astrophysics Data System (ADS)

    Preunkert, Susanne; Wagenbach, Dietmar; Legrand, Michel

    An automatic prototype aerosol sampler has been specifically revised to gain reliable year round data sets of the chemical aerosol composition at high Alpine ice core drill sites. An unattended deployment of the new aerosol sampler at the Vallot Observatory (4361 m a.s.l., French Alps) showed that previous shortcoming such as sensitivity to lightning activities and strong passive sampling effects were successfully overcome. The latter effect was almost eliminated, leading to an improvement of the detection limits by up to a factor of 30. Detailed investigations of the blank variability and sampling characteristics revealed that the new sampler allows to quantify the aerosol species NH 4+, SO 42-, K +, oxalate as well as total Cl - and total NO 3-. In addition records of Na +, Mg 2+ and Ca 2+ can be provided though systematically underestimated. On the other hand unreliable results are derived for formate, acetate and SO 2. Considering a bi-weekly sampling interval, detection limits range from 0.2 to 2 ng m -3 STP (except for Na +: 16 ng m -3 STP). Such a detection limit is also accessible for Na + if PTFE filters are used. The aerosol data set gained at Vallot Observatory allowed preliminary estimates of mean firn/air ratios for NH 4+, SO 42- and total NO 3-. The air/firn relationship appeared to be consistent compared to other high elevation ice core drilling sites. With the improved detection limits at still minimized energy consumption, a year round deployment of the automatic aerosol sampler appears now to be feasible even at polar glacier sites.

  2. Deep-Sea Hydrothermal-Vent Sampler

    NASA Technical Reports Server (NTRS)

    Behar, Alberto E.; Venkateswaran, Kasthur; Matthews, Jaret B.

    2008-01-01

    An apparatus is being developed for sampling water for signs of microbial life in an ocean hydrothermal vent at a depth of as much as 6.5 km. Heretofore, evidence of microbial life in deep-sea hydrothermal vents has been elusive and difficult to validate. Because of the extreme conditions in these environments (high pressures and temperatures often in excess of 300 C), deep-sea hydrothermal- vent samplers must be robust. Because of the presumed low density of biomass of these environments, samplers must be capable of collecting water samples of significant volume. It is also essential to prevent contamination of samples by microbes entrained from surrounding waters. Prior to the development of the present apparatus, no sampling device was capable of satisfying these requirements. The apparatus (see figure) includes an intake equipped with a temperature probe, plus several other temperature probes located away from the intake. The readings from the temperature probes are utilized in conjunction with readings from flowmeters to determine the position of the intake relative to the hydrothermal plume and, thereby, to position the intake to sample directly from the plume. Because it is necessary to collect large samples of water in order to obtain sufficient microbial biomass but it is not practical to retain all the water from the samples, four filter arrays are used to concentrate the microbial biomass (which is assumed to consist of particles larger than 0.2 m) into smaller volumes. The apparatus can collect multiple samples per dive and is designed to process a total volume of 10 L of vent fluid, of which most passes through the filters, leaving a total possibly-microbe-containing sample volume of 200 mL remaining in filters. A rigid titanium nose at the intake is used for cooling the sample water before it enters a flexible inlet hose connected to a pump. As the water passes through the titanium nose, it must be cooled to a temperature that is above a mineral

  3. International Spring and Summer Festivals. Projects and Patterns for Holiday Gifts, Greetings, Ornaments, Decorations, and Classroom Displays. A Good Apple Seasonal Idea/Activity Book for Grades 1-6.

    ERIC Educational Resources Information Center

    Barr, Marilynn G.

    This seasonal idea/activity book for grades 1-6 features interesting facts on the origins of traditions and customs of spring and summer festivals from around the world. There are numerous hands-on art activities, a map of each country or continent of the activity's origin, and a brief explanation of each tradition. Areas and countries of the…

  4. Ideas for Creating and Overcoming Student Silences

    ERIC Educational Resources Information Center

    Woods, Donald R.; Sheardown, Heather

    2009-01-01

    The key idea is that 50 minutes of teacher talk with passive student listening is relatively ineffective in developing student learning. Teachers can create silences for productive active student learning. Students can also change from passive listeners to active talker-discussers of their learning. Ideas are given about how to overcome silences…

  5. Putting Ideas on Paper

    ERIC Educational Resources Information Center

    Allen, Jared; Rogers, Meredith Park

    2015-01-01

    Many students find it easier to express their ideas about science through talking rather than writing. However, writing in science promotes new learning, helps students consolidate and review their scientific ideas, and aids in reformulating and extending their scientific knowledge. These practices lead to formulating and defending scientific…

  6. Teaching Ideas Notebook

    ERIC Educational Resources Information Center

    Journal of Aerospace Education, 1977

    1977-01-01

    Presents teaching ideas for topics in aerospace education including: commemorating Robert Goddard Day on March 16th, commemorating Wright Brothers Day on December 17, utilizing newspaper clippings, and aerospace displays. Ideas are presented in notebook form for removal from the journal. (SL)

  7. Teaching Main Idea Comprehension.

    ERIC Educational Resources Information Center

    Baumann, James F., Ed.

    Intended to help classroom teachers, curriculum developers, and researchers, this book provides current information on theoretical and instructional aspects of main idea comprehension. Titles and authors are as follows: "The Confused World of Main Idea" (James W. Cunningham and David W. Moore); "The Comprehension of Important…

  8. ERM Ideas and Innovations

    ERIC Educational Resources Information Center

    England, Lenore

    2012-01-01

    Welcome to the new "Journal of Electronic Resources Librarianship" column entitled "ERM Ideas and Innovations," which will appear in each issue of JERL for the next 2 years, and possibly more, beginning with this issue. The overall focus of each column will be to introduce and expand ideas, discuss innovations, and ultimately encourage and foster…

  9. IDSAC-IUCAA digital sampler array controller

    NASA Astrophysics Data System (ADS)

    Chattopadhyay, Sabyasachi; Chordia, Pravin; Ramaprakash, A. N.; Burse, Mahesh P.; Joshi, Bhushan; Chillal, Kalpesh

    2016-07-01

    In order to run the large format detector arrays and mosaics that are required by most astronomical instruments, readout electronic controllers are required which can process multiple CCD outputs simultaneously at high speeds and low noise levels. These CCD controllers need to be modular and configurable, should be able to run multiple detector types to cater to a wide variety of requirements. IUCAA Digital Sampler Array Controller (IDSAC), is a generic CCD Controller based on a fully scalable architecture which is adequately flexible and powerful enough to control a wide variety of detectors used in ground based astronomy. The controller has a modular backplane architecture that consists of Single Board Controller Cards (SBCs) and can control up to 5 CCDs (mosaic or independent). Each Single Board Controller (SBC) has all the resources to a run Single large format CCD having up to four outputs. All SBCs are identical and are easily interchangeable without needing any reconfiguration. A four channel video processor on each SBC can process up to four output CCDs with or without dummy outputs at 0.5 Megapixels/Sec/Channel with 16 bit resolution. Each SBC has a USB 2.0 interface which can be connected to a host computer via optional USB to Fibre converters. The SBC uses a reconfigurable hardware (FPGA) as a Master Controller. IDSAC offers Digital Correlated Double Sampling (DCDS) to eliminate thermal kTC noise. CDS performed in Digital domain (DCDS) has several advantages over its analog counterpart, such as - less electronics, faster readout and easier post processing. It is also flexible with sampling rate and pixel throughput while maintaining the core circuit topology intact. Noise characterization of the IDSAC CDS signal chain has been performed by analytical modelling and practical measurements. Various types of noise such as white, pink, power supply, bias etc. has been considered while creating an analytical noise model tool to predict noise of a controller

  10. The neighborhood MCMC sampler for learning Bayesian networks

    NASA Astrophysics Data System (ADS)

    Alyami, Salem A.; Azad, A. K. M.; Keith, Jonathan M.

    2016-07-01

    Getting stuck in local maxima is a problem that arises while learning Bayesian networks (BNs) structures. In this paper, we studied a recently proposed Markov chain Monte Carlo (MCMC) sampler, called the Neighbourhood sampler (NS), and examined how efficiently it can sample BNs when local maxima are present. We assume that a posterior distribution f(N,E|D) has been defined, where D represents data relevant to the inference, N and E are the sets of nodes and directed edges, respectively. We illustrate the new approach by sampling from such a distribution, and inferring BNs. The simulations conducted in this paper show that the new learning approach substantially avoids getting stuck in local modes of the distribution, and achieves a more rapid rate of convergence, compared to other common algorithms e.g. the MCMC Metropolis-Hastings sampler.

  11. Improved techniques for sampling complex pedigrees with the Gibbs sampler

    PubMed Central

    Abraham, K Joseph; Totir, Liviu R; Fernando, Rohan L

    2007-01-01

    Markov chain Monte Carlo (MCMC) methods have been widely used to overcome computational problems in linkage and segregation analyses. Many variants of this approach exist and are practiced; among the most popular is the Gibbs sampler. The Gibbs sampler is simple to implement but has (in its simplest form) mixing and reducibility problems; furthermore in order to initiate a Gibbs sampling chain we need a starting genotypic or allelic configuration which is consistent with the marker data in the pedigree and which has suitable weight in the joint distribution. We outline a procedure for finding such a configuration in pedigrees which have too many loci to allow for exact peeling. We also explain how this technique could be used to implement a blocking Gibbs sampler. PMID:17212946

  12. Thickness and material selection of polymeric passive samplers for polycyclic aromatic hydrocarbons in water: Which more strongly affects sampler properties?

    PubMed

    Belles, Angel; Alary, Claire; Mamindy-Pajany, Yannick

    2016-07-01

    Three configurations of single-phase polymer passive samplers made of polyoxymethylene (POM), silicone rubber, and polyethylene (PE) were simultaneously calibrated in laboratory experiments by determining their partitioning coefficients and the POM diffusion coefficients and by validating a kinetic accumulation model. In addition, the performance of each device was evaluated under field conditions. With the support of the developed model, the device properties are discussed with regard to material selection and polymer thickness. The results show that a sampler's properties, such as its concentration-averaging period and ability to sample a large amount of polycyclic aromatic hydrocarbons, are widely affected by material selection. Sampler thickness also allows modulation of the properties of the device but with a much lower magnitude. Selection of the appropriate polymer and/or thickness allows samplers to be adapted either for quick equilibration or for the kinetic accumulation regime and promotes either membrane or water boundary layer control of the kinetic accumulation. In addition, membrane-controlled or equilibrated compounds are quantified with greater accuracy because they are not corrected by the performance reference compounds approach. However, the averaged concentrations cannot be assessed when compounds reach equilibrium in the sampler, whereas membrane-controlled devices remaining in the kinetic accumulation regime provide averaged concentrations without requiring performance reference compound correction; detection limits are then increased because of the higher mass transfer resistance of the membrane. Environ Toxicol Chem 2016;35:1708-1717. © 2015 SETAC.

  13. Improving the spatial resolution of atmospheric polycyclic aromatic hydrocarbons using passive air samplers in a multi-industrial city.

    PubMed

    Choi, Sung-Deuk; Kwon, Hye-Ok; Lee, Yun-Se; Park, Eun-Jeong; Oh, Joo-Yeon

    2012-11-30

    The source-receptor relationship of polycyclic aromatic hydrocarbons (PAHs) in the industrial city has been generally investigated using active air samplers (AAS), but they only provide low spatial resolution data. In this study, the spatial resolution of PAHs was improved by the use of polyurethane foam based passive air samplers (PUF-PAS). We deployed 40 passive air samplers in duplicate at 20 sites in the largest industrial city of Ulsan, South Korea during winter (January 7-February 25, 2011). Among the 16 US-EPA priority PAHs, 13 compounds excluding naphthalene, acenaphthylene, and acenaphthene were selected for the calculation of air concentrations. The level of gaseous ∑(13)PAHs in Ulsan (mean: 43 ng/m(3)) was not as high as we expected due to prevailing winds which transported large amounts of PAHs to the East Sea. The spatial distribution of PAHs, principal component analysis, and diagnostic ratios suggested the influence of PAH emissions from industrial complexes to the surrounding areas. This study demonstrated that the source-receptor relationship of PAHs in the industrial area can be more clearly understood using passive air samplers.

  14. Evaluation of a pneumatic Martian soil sampler concept

    NASA Technical Reports Server (NTRS)

    Schaefer, John L.; Neathery, James K.; Stencel, John M.

    1994-01-01

    The pneumatic soil sampler concept was successfully demonstrated by penetrating a Martian simulant soil to a depth of 2 meters. Working gas pressure, composition, and pulsing were evaluated with the objective of minimizing gas usage. Also, the probe penetration force was investigated with the objective of minimizing probe weight. Gas and probe penetration force, while not yet optimized, are within the range which make the soil sampler concept feasible. While the tests described in this report did not answer all the questions and address all the variables associated with pneumatic soil sampling, valuable data experience and knowledge were gained which can be used to further develop the concept.

  15. Nonwoven Textile for Use in a Nanoparticle Respiratory Deposition Sampler.

    PubMed

    Vosburgh, Donna J H; Park, Jae Hong; Mines, Levi W D; Mudunkotuwa, Imali A; Anthony, T Renée; Peters, Thomas M

    2016-11-22

    The nanoparticle respiratory deposition (NRD) sampler is a personal sampler that combines a cyclone, impactor, and a nylon mesh diffusion stage to measure a worker's exposure to nanoparticles. The concentration of titanium in the nylon mesh of the diffusion stage complicates the application of the NRD sampler for assessing exposures to titanium dioxide nanoparticles. This study evaluated commercially available nonwoven textiles for use as an alternative media in the diffusion stage of the NRD sampler. Three textiles were selected as containing little titanium from an initial screening of 11 textiles by field portable x-ray fluorescence (FPXRF). Further evaluation on these three textiles was conducted to determine the concentration of titanium and other metals by inductively coupled plasma - optical emission spectroscopy (ICP-OES), the number of layers required to achieve desired collection characteristics for use as the diffusion stage in the NRD sampler (i.e., the nanoparticulate matter, NPM, criterion), and the pressure drop associated with that number of layers. Only three (two composed of cotton fibers, C1 and C2; and one of viscose bamboo and cotton fibers, BC) of 11 textiles screened had titanium concentrations below the limit of detection the XRF device (0.15 µg/cm(2)). Multiple metals, including small amounts of titanium, were found in each of the three nonwoven textiles using ICP-OES. The number of 25-mm-diameter layers required to achieve the collection efficiency by size required for the NRD sampler was three for C1 (R(2) = 0.95 with reference to the NPM criterion), two for C2 (R(2) = 0.79), and three for BC (R(2) = 0.87). All measured pressure drops were less than the theoretical and even the greatest pressure drop of 65.4 Pa indicated that a typical personal sampling pump could accommodate any of the three nonwoven textiles in the NRD sampler. The titanium concentration, collection efficiency, and measured pressure drops show there is a potential

  16. Selecting Performance Reference Compounds (PRCS) for Low Density Polyethylene Passive Samplers

    EPA Science Inventory

    Use of equilibrium passive samplers for performing aquatic environmental monitoring at contaminated sites is becoming more common. However, a current challenge in passive sampling is determining when equilibrium is achieved between the sampler, target contaminants, and environm...

  17. Determining Passive Sampler Partition Coefficients for Dissolved-phase Organic Contaminants

    EPA Science Inventory

    Passive samplers are used for environmental and analytical purposes to measure dissolved nonionic organic contaminants (NOCs) by absorption from a contaminated medium into a clean phase, usually in the form of a synthetic organic film. Recently developed passive sampler techniqu...

  18. Limitations of Reverse Polyethylene Samplers (RePES) for Evaluating Toxicity of Field Contaminated Sediments

    EPA Science Inventory

    Passive samplers are used to measure dissolved nonionic organic contaminants (NOCs) in environmental media. More recently, reverse polyethylene samplers (RePES) have been used with spiked sediments to recreate interstitial water exposure concentrations and observed toxicity. In...

  19. Evaluating the Relationship between Equilibrium Passive Sampler Uptake and Aquatic Organism Bioaccumulation

    EPA Science Inventory

    This Critcal Review evaluates passive sampler uptake of hydrophobic organic contaminants (HOCs) in water column and interstitial water exposures as a surrogate for organism bioaccumulation. Fifty-seven studies were found where both passive sampler uptake and organism bioaccumulat...

  20. Evaluating the Relationship between Equilibrium Passive Sampler Uptake and Aquatic Organism Bioaccumulation..

    EPA Science Inventory

    This review evaluates passive sampler uptake of hydrophobic organic contaminants (HOCs) in water column and interstitial water exposures as a surrogate for organism bioaccumulation. Fifty-four studies were found where both passive sampler uptake and organism bioaccumulation wer...

  1. Passive Samplers for Investigations of Air Quality: Method Description, Implementation, and Comparison to Alternative Sampling Methods

    EPA Science Inventory

    This Paper covers the basics of passive sampler design, compares passive samplers to conventional methods of air sampling, and discusses considerations when implementing a passive sampling program. The Paper also discusses field sampling and sample analysis considerations to ensu...

  2. Ideas for Directors.

    ERIC Educational Resources Information Center

    Child Care Information Exchange, 1990

    1990-01-01

    Discusses ideas for directors. Topics include the safety of child care; profit sharing in child care; and ways to get audited, fashion a philosophy, ask for money, draw out shy employees, and beat stress. (RJC)

  3. Evaluation of the Snap Sampler for Sampling Ground Water Monitoring Wells for Inorganic Analytes

    DTIC Science & Technology

    2008-12-01

    within the well. The slits in the two discs were misaligned to limit water exchange. The discs are attached to the Snap Sampler trigger line with...ER D C/ CR R EL T R -0 8 -2 5 Evaluation of the Snap Sampler for Sampling Ground Water Monitoring Wells for Inorganic Analytes...Louise V. Parker, Nathan D. Mulherin, and Gordon E. Gooch December 2008 Well Screen Baffle Snap Sampler Trigger Line Pump Tubing Top Snap Sampler RGC

  4. Enhanced surface sampler and process for collection and release of analytes

    DOEpatents

    Addleman, Raymond S; Atkinson, David A; Bays, John T; Chouyyok, Wilaiwan; Cinson, Anthony D; Ewing, Robert G; Gerasimenko, Aleksandr A

    2015-02-03

    An enhanced swipe sampler and method of making are described. The swipe sampler is made of a fabric containing selected glass, metal oxide, and/or oxide-coated glass or metal fibers. Fibers are modified with silane ligands that are directly attached to the surface of the fibers to functionalize the sampling surface of the fabric. The swipe sampler collects various target analytes including explosives and other threat agents on the surface of the sampler.

  5. 7 CFR 801.5 - Tolerance for diverter-type mechanical samplers.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 7 2010-01-01 2010-01-01 false Tolerance for diverter-type mechanical samplers. 801.5 Section 801.5 Agriculture Regulations of the Department of Agriculture (Continued) GRAIN INSPECTION... mechanical samplers. The maintenance tolerance for diverter-type mechanical samplers (primary, or primary...

  6. 7 CFR 801.5 - Tolerance for diverter-type mechanical samplers.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 7 2011-01-01 2011-01-01 false Tolerance for diverter-type mechanical samplers. 801.5 Section 801.5 Agriculture Regulations of the Department of Agriculture (Continued) GRAIN INSPECTION... mechanical samplers. The maintenance tolerance for diverter-type mechanical samplers (primary, or primary...

  7. 7 CFR 801.5 - Tolerance for diverter-type mechanical samplers.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 7 2013-01-01 2013-01-01 false Tolerance for diverter-type mechanical samplers. 801.5 Section 801.5 Agriculture Regulations of the Department of Agriculture (Continued) GRAIN INSPECTION... mechanical samplers. The maintenance tolerance for diverter-type mechanical samplers (primary, or primary...

  8. 7 CFR 801.5 - Tolerance for diverter-type mechanical samplers.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 7 2014-01-01 2014-01-01 false Tolerance for diverter-type mechanical samplers. 801.5 Section 801.5 Agriculture Regulations of the Department of Agriculture (Continued) GRAIN INSPECTION... mechanical samplers. The maintenance tolerance for diverter-type mechanical samplers (primary, or primary...

  9. 7 CFR 801.5 - Tolerance for diverter-type mechanical samplers.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 7 2012-01-01 2012-01-01 false Tolerance for diverter-type mechanical samplers. 801.5 Section 801.5 Agriculture Regulations of the Department of Agriculture (Continued) GRAIN INSPECTION... mechanical samplers. The maintenance tolerance for diverter-type mechanical samplers (primary, or primary...

  10. In the Classroom: Empowering Girls. Idea Book.

    ERIC Educational Resources Information Center

    Peace Corps, Washington, DC. Information Collection and Exchange Div.

    Peace Corps volunteers are perceived as role models, technical specialists, teachers, counselors, heroes, and friends. This idea book shares specific ideas and frameworks for transferring the potential for positive guidance into classrooms and communities around the world. It concentrates on activities and strategies that increase girls' access…

  11. Serious Ideas and Middle School Students

    ERIC Educational Resources Information Center

    Palumbo, Anthony; Sanacore, Joseph

    2013-01-01

    With support, young adolescents crave the challenge of learning about serious ideas through serious literature. Middle-level learners also enjoy opportunities to become immersed in activities that foster a deeper understanding of serious ideas. After discussing the value of using serious narrative literature, a rationale is provided for supporting…

  12. Silicone passive equilibrium samplers as 'chemometers' in eels and sediments of a Swedish lake.

    PubMed

    Jahnke, Annika; Mayer, Philipp; McLachlan, Michael S; Wickström, Håkan; Gilbert, Dorothea; MacLeod, Matthew

    2014-03-01

    Passive equilibrium samplers deployed in two or more media of a system and allowed to come to equilibrium can be viewed as 'chemometers' that reflect the difference in chemical activities of contaminants between the media. We applied silicone-based equilibrium samplers to measure relative chemical activities of seven 'indicator' polychlorinated biphenyls (PCBs) and hexachlorobenzene in eels and sediments from a Swedish lake. Chemical concentrations in eels and sediments were also measured using exhaustive extraction methods. Lipid-normalized concentrations in eels were higher than organic carbon-normalized concentrations in sediments, with biota-sediment accumulation factors (BSAFs) of five PCBs ranging from 2.7 to 12.7. In contrast, chemical activities of the same pollutants inferred by passive sampling were 3.5 to 31.3 times lower in eels than in sediments. The apparent contradiction between BSAFs and activity ratios is consistent with the sorptive capacity of lipids exceeding that of sediment organic carbon from this ecosystem by up to 50-fold. Factors that may contribute to the elevated activity in sediments are discussed, including slower response of sediments than water to reduced emissions, sediment diagenesis and sorption to phytoplankton. The 'chemometer' approach has the potential to become a powerful tool to study the thermodynamic controls on persistent organic chemicals in the environment and should be extended to other environmental compartments.

  13. Characterization of polyurethane foam (PUF) and sorbent impregnated PUF (SIP) disk passive air samplers for measuring organophosphate flame retardants.

    PubMed

    Abdollahi, Atousa; Eng, Anita; Jantunen, Liisa M; Ahrens, Lutz; Shoeib, Mahiba; Parnis, J Mark; Harner, Tom

    2017-01-01

    This study aimed to characterize the uptake of organophosphate esters (OPEs) by polyurethane foam (PUF) and sorbent-impregnated polyurethane foam (SIP) disk passive air samplers (PAS). Atmospheric OPE concentrations were monitored with high-volume active air samplers (HV-AAS) that were co-deployed with passive air samplers. Samples were analyzed for tris(2-chloroisopropyl) phosphate (TCIPP), tri(phenyl) phosphate (TPhP), tris(2-chloroethyl) phosphate (TCEP), and tris(2,3-dichloropropyl) phosphate (TDCIPP). The mean concentration of ∑OPEs in air was 2650 pg/m(3) for the HV-AAS. Sampling rates and the passive sampler medium (PSM)-air partition coefficient (KPSM-Air) were calculated for individual OPEs. The average calculated sampling rates (R) for the four OPEs were 3.6 ± 1.2 and 4.2 ± 2.0 m(3)/day for the PUF and SIP disks, respectively, and within the range of the recommended default value of 4 ± 2 m(3)/day. Since most of the OPEs remained in the linear uptake phase during the study, COSMO-RS solvation theory and an oligomer-based model were used to estimate KPUF-Air for the OPEs. The estimated values of log KPUF-Air were 7.45 (TCIPP), 9.35 (TPhP), 8.44 (TCEP), and 9.67 (TDCIPP). Finally, four configurations of the PUF and SIP disks were tested by adjusting the distance of the gap opening between the upper and lower domes of the sampler housing: i.e. 2 cm, 1 cm, no gap and 1 cm overlap. The sampling rate did not differ significantly between these four configurations (p < 0.05).

  14. Modification and calibration of a passive air sampler for monitoring vapor and particulate phase brominated flame retardants in indoor air: application to car interiors.

    PubMed

    Abdallah, Mohamed Abou-Elwafa; Harrad, Stuart

    2010-04-15

    A passive air sampler was modified to monitor both vapor and particulate phase brominated flame retardants (BFRs) in indoor air using polyurethane foam disks and glass fiber filters (GFF). Significant correlation (p < 0.01) was observed between passive (ng day(-1)) and active sampler (ng m(-3)) derived BFR concentrations in an office microenvironment (r = 0.94 and 0.89 for vapor and particulate phase BFRs, respectively). A calibration experiment was performed where concentrations of target BFRs were obtained for an office using a low volume active sampler operated over a 50 day period alongside passive samplers. The passive uptake rates of each studied BFR ranged between (0.558-1.509 ng day(-1)) and (0.448-0.579 ng day(-1)) for vapor and particulate phases, respectively. The passive entrapment of particles by the GFF was investigated using environmental scanning electron microscopy which revealed gravitational deposition of particles as the main mechanism involved. The developed sampler was applied to monitor BFR concentrations in 21 cars. Average concentrations of SigmaHBCDs, TBBP-A, and Sigmatetra-deca BDEs were 400, 3, and 2200 pg m(-3) in cabins and 400, 1, and 1600 pg m(-3) in trunks. No significant differences (p < 0.05) were observed between levels of SigmaHBCDs and Sigmatrito hexa- BDEs in cabins and trunks. However, TBBP-A, BDE-209, and SigmaPBDEs concentrations were significantly higher in vehicle cabins.

  15. South Philadelphia Passive Sampler and Sensor Study: Interim Report

    EPA Science Inventory

    Starting in June 2013, the United States Environmental Protection Agency (U.S. EPA) and the City of Philadelphia Air Measurements Services began collaborative research on the use of passive samplers (PSs) and stand-alone air measurement (SAM) systems to improve information on the...

  16. Just Another Gibbs Sampler (JAGS): Flexible Software for MCMC Implementation

    ERIC Educational Resources Information Center

    Depaoli, Sarah; Clifton, James P.; Cobb, Patrice R.

    2016-01-01

    A review of the software Just Another Gibbs Sampler (JAGS) is provided. We cover aspects related to history and development and the elements a user needs to know to get started with the program, including (a) definition of the data, (b) definition of the model, (c) compilation of the model, and (d) initialization of the model. An example using a…

  17. Vacuum probe sampler removes micron-sized particles from surfaces

    NASA Technical Reports Server (NTRS)

    Whitfield, W. J.

    1968-01-01

    Vacuum probe sampler removes micron-sized particles from sensitive surfaces, without damage to the surface. The probe has a critical orifice to ensure an optimum airflow rate that disturbs the boundary layer of air and raises bacteria from the surface into the probe with the moving air stream.

  18. PARTICULATE ORGANIC CARBON MEASUREMENTS COLLECTED WITH LOW FLOW PERSONAL SAMPLERS

    EPA Science Inventory

    EPA's National Exposure Research Laboratory and the Research Triangle Institute (RTI) have conducted a particulate matter (PM) personal exposure study in Research Triangle Park, NC. Particulate carbon was sampled with pre-fired quartz filters using low flow PM2.5 samplers (2 L...

  19. Polyurethane foam (PUF) passive samplers for monitoring phenanthrene in stormwater.

    PubMed

    Dou, Yueqin; Zhang, Tian C; Zeng, Jing; Stansbury, John; Moussavi, Massoum; Richter-Egger, Dana L; Klein, Mitchell R

    2016-04-01

    Pollution from highway stormwater runoff has been an increasing area of concern. Many structural Best Management Practices (BMPs) have been implemented for stormwater treatment and management. One challenge for these BMPs is to sample stormwater and monitor BMP performance. The main objective of this study was to evaluate the feasibility of using polyurethane foam (PUF) passive samplers (PSs) for sampling phenanthrene (PHE) in highway stormwater runoff and BMPs. Tests were conducted using batch reactors, glass-tube columns, and laboratory-scale BMPs (bioretention cells). Results indicate that sorption for PHE by PUF is mainly linearly relative to time, and the high sorption capacity allows the PUF passive sampler to monitor stormwater events for months or years. The PUF passive samplers could be embedded in BMPs for monitoring influent and effluent PHE concentrations. Models developed to link the results of batch and column tests proved to be useful for determining removal or sorption parameters and performance of the PUF-PSs. The predicted removal efficiencies of BMPs were close to the real values obtained from the control columns with errors ranging between -8.46 and 1.52%. This research showed that it is possible to use PUF passive samplers for sampling stormwater and monitoring the performance of stormwater BMPs, which warrants the field-scale feasibility studies in the future.

  20. South Philadelphia Passive Sampler and Sensor Study - Interim Report

    EPA Science Inventory

    Starting in the June 2013, the U.S. EPA and the City of Philadelphia Air Measurements Services (AMS) began a collaborative research project to investigate how sensor-based, stand-alone air measurements (SAMs) and passive samplers (PSs) can help improve information on air pollutan...

  1. Stress analysis of portable safety platform (Core Sampler Truck)

    SciTech Connect

    Ziada, H.H.

    1995-03-30

    This document provides the stress analysis and evaluation of the portable platform of the rotary mode core sampler truck No. 2 (RMCST {number_sign}2). The platform comprises railing, posts, deck, legs, and a portable ladder; it is restrained from lateral motion by means of two brackets added to the drill-head service platform.

  2. 40 CFR 86.519-90 - Constant volume sampler calibration.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... major maintenance to assure the stability of the pump slip rate. Analysis of mass injection data will... by EPA for both PDP (Positive Displacement Pump) and CFV (Critical Flow Venturi) are outlined below... establish the flow rate of the constant volume sampler pump. All the parameters related to the pump...

  3. 40 CFR 86.519-90 - Constant volume sampler calibration.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... major maintenance to assure the stability of the pump slip rate. Analysis of mass injection data will... by EPA for both PDP (Positive Displacement Pump) and CFV (Critical Flow Venturi) are outlined below... establish the flow rate of the constant volume sampler pump. All the parameters related to the pump...

  4. 40 CFR 86.519-90 - Constant volume sampler calibration.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... major maintenance to assure the stability of the pump slip rate. Analysis of mass injection data will... by EPA for both PDP (Positive Displacement Pump) and CFV (Critical Flow Venturi) are outlined below... establish the flow rate of the constant volume sampler pump. All the parameters related to the pump...

  5. 40 CFR 86.519-90 - Constant volume sampler calibration.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... major maintenance to assure the stability of the pump slip rate. Analysis of mass injection data will... by EPA for both PDP (Positive Displacement Pump) and CFV (Critical Flow Venturi) are outlined below... establish the flow rate of the constant volume sampler pump. All the parameters related to the pump...

  6. Grab Samplers for Benthic Macroinvertebrates in the Lower Mississippi River.

    DTIC Science & Technology

    1982-07-01

    River 26. AftTRACT (Cfeo do reversn e o if neem mod Identiy by block nuibot) -- he use of any one single type and size of existing grab sampler for...was from the stern of a 40-ft* vessel. The vessel’s bow was tied to a tree on the shoreline. Although the range of water depths during sampling was

  7. Fluidic Sampler. Tanks Focus Area. OST Reference No. 2007

    SciTech Connect

    None, None

    1999-09-01

    Problem Definition; Millions of gallons of radioactive and hazardous wastes are stored in underground tanks across the U.S. Department of Energy (DOE) complex. To manage this waste, tank operators need safe, cost-effective methods for mixing tank material, transferring tank waste between tanks, and collecting samples. Samples must be collected at different depths within storage tanks containing various kinds of waste including salt, sludge, and supernatant. With current or baseline methods, a grab sampler or a core sampler is inserted into the tank, waste is maneuvered into the sample chamber, and the sample is withdrawn from the tank. The mixing pumps in the tank, which are required to keep the contents homogeneous, must be shut down before and during sampling to prevent airborne releases. These methods are expensive, require substantial hands-on labor, increase the risk of worker exposure to radiation, and often produce nonrepresentative and unreproducible samples. How It Works: The Fluidic Sampler manufactured by AEA Technology Engineering Services, Inc., enables tank sampling to be done remotely with the mixing pumps in operation. Remote operation minimizes the risk of exposure to personnel and the possibility of spills, reducing associated costs. Sampling while the tank contents are being agitated yields consistently homogeneous, representative samples and facilitates more efficient feed preparation and evaluation of the tank contents. The above-tank portion of the Fluidic Sampler and the replacement plug and pipework that insert through the tank top are shown.

  8. 30 CFR 74.4 - Specifications of sampler unit.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... centimeters) of water measured at the inlet of the pump; and (ii) for not less than 10 hours at a flow rate of....4 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND... § 74.4 Specifications of sampler unit. (a) Pump unit: (1) Dimensions. The overall dimensions of...

  9. 30 CFR 74.4 - Specifications of sampler unit.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... centimeters) of water measured at the inlet of the pump; and (ii) for not less than 10 hours at a flow rate of....4 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND... § 74.4 Specifications of sampler unit. (a) Pump unit: (1) Dimensions. The overall dimensions of...

  10. 40 CFR 86.519-90 - Constant volume sampler calibration.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... major maintenance to assure the stability of the pump slip rate. Analysis of mass injection data will... by EPA for both PDP (Positive Displacement Pump) and CFV (Critical Flow Venturi) are outlined below... establish the flow rate of the constant volume sampler pump. All the parameters related to the pump...

  11. FIELD EVALUATION OF A HIGH-VOLUME DICHOTOMOUS SAMPLER

    EPA Science Inventory

    This study presents the field evaluation of a high-volume dichotomous sampler that collects coarse (PM10-2.5) and fine (PM2.5) particulate matter. The key feature of this device is the utilization of a round-nozzle virtual impactor with a 50% cutpoint at 2.5 5m to split PM10 into...

  12. Student Sampler: Facts in Brief on North Carolina

    ERIC Educational Resources Information Center

    North Carolina Department of Public Instruction, 2006

    2006-01-01

    This student sampler has been compiled to assist North Carolina students (4th and 8th grade) in their study of North Carolina. It is designed to introduce them to the people, places and events that have shaped North Carolina history. Topics include state symbols, descriptions of the state flag, and seal, the lyrics to the state song, and the…

  13. 7 CFR 61.30 - Examination of sampler.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Examination of sampler. 61.30 Section 61.30 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) REGULATIONS AND STANDARDS UNDER...

  14. Ammonia concentration modeling based on retained gas sampler data

    SciTech Connect

    Terrones, G.; Palmer, B.J.; Cuta, J.M.

    1997-09-01

    The vertical ammonia concentration distributions determined by the retained gas sampler (RGS) apparatus were modeled for double-shell tanks (DSTs) AW-101, AN-103, AN-104, and AN-105 and single-shell tanks (SSTs) A-101, S-106, and U-103. One the vertical transport of ammonia in the tanks were used for the modeling. Transport in the non-convective settled solids and floating solids layers is assumed to occur primarily via some type of diffusion process, while transport in the convective liquid layers is incorporated into the model via mass transfer coefficients based on empirical correlations. Mass transfer between the top of the waste and the tank headspace and the effects of ventilation of the headspace are also included in the models. The resulting models contain a large number of parameters, but many of them can be determined from known properties of the waste configuration or can be estimated within reasonable bounds from data on the waste samples themselves. The models are used to extract effective diffusion coefficients for transport in the nonconvective layers based on the measured values of ammonia from the RGS apparatus. The modeling indicates that the higher concentrations of ammonia seen in bubbles trapped inside the waste relative to the ammonia concentrations in the tank headspace can be explained by a combination of slow transport of ammonia via diffusion in the nonconvective layers and ventilation of the tank headspace by either passive or active means. Slow transport by diffusion causes a higher concentration of ammonia to build up deep within the waste until the concentration gradients between the interior and top of the waste are sufficient to allow ammonia to escape at the same rate at which it is being generated in the waste.

  15. Multilevel Samplers to Assess Microbial Community Response to Biostimulation

    NASA Astrophysics Data System (ADS)

    Baldwin, B. R.; McKinley, J. P.; Peacock, A. D.; Park, M.; Ogles, D.; Istok, J. D.; Resch, C. T.; White, D. C.

    2006-05-01

    Passive multilevel samplers (MLS) containing a solid matrix for microbial colonization were used in conjunction with a push-pull biostimulation experiment designed to promote biological U(VI) and Tc(VII) reduction. MLS were deployed at 24 elevations in the injection well and two down gradient wells to investigate the spatial variability in microbial community composition and growth prior to and following biostimulation. The microbial community was characterized by real-time PCR (Q-PCR) quantification of eubacteria, NO3- reducing bacteria (nirS and nirK), δ-proteobacteria, Geobacter sp., and methanogens (mcrA). Pretest cell densities were low overall but varied substantially with significantly greater eubacterial populations detected at circumneutral pH (T-test, α=0.05) suggesting carbon substrate and low pH limitation of microbial activity. Although pretest cell densities were low, denitrifying bacteria were dominant members of the microbial community. Biostimulation with an ethanol amended groundwater resulted in concurrent NO3- and Tc(VII) reduction followed by U(VI) reduction. Q-PCR analysis of MLS revealed significant (1-2 orders of magnitude, T-test, α=0.05) increases in cell densities of eubacteria, denitrifiers, δ- proteobacteria, Geobacter sp., and methanogens in response to biostimulation. Traditionally characterization of sediment samples has been used to investigate the microbial community response to biostimulation, however, collection of sediment samples is expensive and not conducive to deep aquifers or temporal studies. The results presented demonstrate that push-pull tests with passive MLS provide an inexpensive approach to determine the effect of biostimulation on contaminant concentrations, geochemical conditions, and the microbial community composition and function.

  16. Evaluation of IOM personal sampler at different flow rates.

    PubMed

    Zhou, Yue; Cheng, Yung-Sung

    2010-02-01

    The Institute of Occupational Medicine (IOM) personal sampler is usually operated at a flow rate of 2.0 L/min, the rate at which it was designed and calibrated, for sampling the inhalable mass fraction of airborne particles in occupational environments. In an environment of low aerosol concentrations only small amounts of material are collected, and that may not be sufficient for analysis. Recently, a new sampling pump with a flow rate up to 15 L/min became available for personal samplers, with the potential of operating at higher flow rates. The flow rate of a Leland Legacy sampling pump, which operates at high flow rates, was evaluated and calibrated, and its maximum flow was found to be 10.6 L/min. IOM samplers were placed on a mannequin, and sampling was conducted in a large aerosol wind tunnel at wind speeds of 0.56 and 2.22 m/s. Monodisperse aerosols of oleic acid tagged with sodium fluorescein in the size range of 2 to 100 microm were used in the test. The IOM samplers were operated at flow rates of 2.0 and 10.6 L/min. Results showed that the IOM samplers mounted in the front of the mannequin had a higher sampling efficiency than those mounted at the side and back, regardless of the wind speed and flow rate. For the wind speed of 0.56 m/s, the direction-averaged (the average value of all orientations facing the wind direction) sampling efficiency of the samplers operated at 2.0 L/min was slightly higher than that of 10.6 L/min. For the wind speed of 2.22 m/s, the sampling efficiencies at both flow rates were similar for particles < 60 microm. The results also show that the IOM's sampling efficiency at these two different flow rates follows the inhalable mass curve for particles in the size range of 2 to 20 microm. The test results indicate that the IOM sampler can be used at higher flow rates.

  17. Significant Ideas and Progressive Change

    ERIC Educational Resources Information Center

    Morgan, Gwen; Mitchell, Anne

    2012-01-01

    Ideas are not one-time "Eureka" moments, but are parts of concepts progressing forward. Sometimes years pass before ideas are implemented. They then resurface, connect with other ideas, and move policies ahead. Meanwhile, the idea remains alive in the field, influencing decisions and goals. Ideas build on one another when implemented. The field of…

  18. A passive ozone sampler based on a reaction with iodide.

    PubMed

    Yanagisawa, Y

    1994-02-01

    A new passive sampler for ozone and its simple analytical system have been developed. Because it is small and sensitive, the sampler can be used for determining personal exposures to ozone and oxidants and for multilocation measurements. The sampler consists of an electrode, a spacer, and several layers of membrane filters and Teflon meshes. The electrode is a carbon paper disk coated with nylon-6 polymer and potassium iodide. The membrane filters are used to remove interferences. A sampling rate of ozone is controlled by the spacer and Teflon meshes. Iodine is liberated by an oxidation reaction of potassium iodide with ozone. The iodine is stabilized by forming a charge transfer complex with nylon-6 and is accumulated in the nylon-6 layer. The amount of iodine, which is proportional to the level of ozone exposure, is quantified by constant current coulometry. The discharge time of a galvanic battery is measured using the electrode as a positive electrode and a zinc plate as a counter electrode. A time-weighted average concentration of ozone is derived from the discharge time after exposing the electrode to ozone. The effects of various environmental conditions on the sampler's performance were investigated. The results indicated that the sampler showed a linear response to ozone exposure up to 1,450 parts per billion for every hour of use (ppb.hour). The minimum detectable exposure was about 400 ppb.hour. The effects of surface wind velocity, temperature, and humidity were small. However, a relative humidity below 20% resulted in an underestimation of the ozone concentration. Because the electrode requires no pretreatment and the analytical method is very simple, this method is suitable for large-scale studies of personal exposures to ozone and oxidants using multilocation measurements.

  19. IDEAS Pamphlet for CES

    NASA Technical Reports Server (NTRS)

    Miranda, David J.; Santora, Joshua D.; Hochstadt, Jake

    2017-01-01

    Pamphlet on the IDEAS project for the Game Changing Development programs NASA booth at the Consumer Electronics Show. Pamphlet covers a high level overview of the technology developed and its capabilities. The technology being developed for the Integrated Display and Environmental Awareness System (IDEAS) project is a wearable computer system with an optical heads-up display (HUD) providing various means of communication and data manipulation to the user. The wearable computer, in the form of smart glasses, would allow personnel to view and modify critical information on a transparent, interactive display. This is presented in their unobstructed field of view, without taking their eyes or hands away from their critical work. The product is being designed in a modular manner so that the user can adjust the capabilities of the device depending on need. IDEAS is a full featured hardware and softwaresystem built to enhance the capabilities of theNASA work force on the ground and in space.

  20. Evaluation of the commercial bacterial air samplers by the new bacterial aerosol generator.

    PubMed

    Furuhashi, M; Miyamae, T

    1981-03-01

    Of late microbiological air samplers of various types have been developed in monitoring the critical areas in the hospitals and pharmaceutical plants. It has not been clarified, however, that a commercial air sampler is the most suitable for such a purpose. The present studies were conducted to investigate the bacterial collection efficiency of these air samplers. The new experimental apparatus basically consists of a bacterial aerosol generator and an isokinetic sampling steel air duct. Serratia marcescens was used as the test bacteria, and then the bacterial collection efficiency of the three kinds of commercial air samplers (Andersen air sampler, Pin-hole air sampler and M/G air sampler) was examined. It was found that in these experiments these three air samplers had a high bacterial collection efficiency. All except 0.3 to 2.0% of the small bacterial particles (1 to 5 micrometer) were trapped by these tested air samplers. Furthermore, in these three air samplers it was also confirmed that for collecting the hospital airborne bacteria the bacterial collection efficiency was more than 99.9%. The authors' findings showed that these three air samplers were designed according to Ranz and Wong's theoretical and experimental results.

  1. An assessment of the variability in performance of wet atmospheric deposition samplers

    USGS Publications Warehouse

    Graham, R.C.; Robertson, J.K.; Obal, John

    1987-01-01

    The variability in performance of two brands of wet/dry atmospheric deposition samplers were compared for 1 year at a sincle site. A total of nine samplers were used. Samples were collected weekly and analyzed for pH, specific conductance, common chemical constituents, and sample volume. Additionally, data on the duration of each sampler opening were recorded using a microdatalogger. These data disprove the common perception that samplers remain open throughout a precipitation event. The sensitivity of sampler sensors within the range tested did not have a defineable impact on sample collection. The nonnormal distribution within the data set necessitated application of the nonparametric Friedman Test to assess comparability of sample chemical composition and volume between and within sampler brands. Statistically significant differences existed for most comparisons, however the test did not permit quantification of their magnitudes. Differences in analyte concentrations between samplers were small. (USGS)

  2. Considerations for sampling inorganic constituents in ground water using diffusion samplers

    USGS Publications Warehouse

    Vroblesky, D.A.; Petkewich, M.D.; Campbell, T.R.; ,

    2002-01-01

    Data indicate that nylon-screen and dialysis diffusion samplers are capable of obtaining concentrations of inorganic solutes in ground water from wells that closely correspond to concentrations obtained by low-flow sampling. Conservative solutes, such as chloride, can be sampled by filling the diffusion samplers with oxygenated water. The samplers should be filled with anaerobic water for sampling redoxsensitive solutes. Oxidation of iron within the samplers, either by using aerobic fill water or by in-well oxygenation events, can lead to erroneous iron concentrations. Lithologic and chemical heterogeneity and sampler placement depth can lead to differences between concentrations from diffusion samples and low-flow samples because of mixing during pumping. A disadvantage of regenerated cellulose dialysis samplers is that they can begin to biodegrade within the two weeks of deployment. Nylon-screen samplers buried beneath streambed sediment along the unnamed tributary in a discharge zone of arseniccontaminated ground water were useful in locating the specific discharge zone.

  3. Ideas for Directors.

    ERIC Educational Resources Information Center

    Child Care Information Exchange, 1987

    1987-01-01

    Presents child care center directors with a variety of relevant management ideas from business and the child care field. They include translating employee body language; leadership myths; on-the-job teacher training; undesirable bosses; wasting employee talent; voicing disagreement; employee anger; encouraging creativity; and coping with late…

  4. Ideas for Intercultural Education

    ERIC Educational Resources Information Center

    Marginson, Simon; Sawir, Erlenawati

    2011-01-01

    Written by a cross-cultural pair of authors, "Ideas for Intercultural Education" takes a critical look at present approaches to international education, focusing on the intercultural potential that it offers but mostly fails to deliver. The underlying premise of this profound, engaging book is that international education can be a transforming…

  5. Brainstorming for Ideas

    ERIC Educational Resources Information Center

    Mogahed, Mogahed M.

    2011-01-01

    Learners occasionally complain that they lack ideas when sitting down to write a composition. Teachers complain that they do not want to spend half the class time telling students what to write. There is an answer. Teachers brainstorm words connected with the topic in class before setting the composition for homework. The question remains: how to…

  6. Sharing Teaching Ideas.

    ERIC Educational Resources Information Center

    Crouse, Richard J.; And Others

    1991-01-01

    The first idea concerns a board game similar to tic-tac-toe in which the strategy involves the knowledge of the factorization of quadratic polynomials. The second game uses the calculation of the surface areas of solid figures applying the specific examples of cigar boxes and cylindrical tin cans. (JJK)

  7. Ideas for Directors.

    ERIC Educational Resources Information Center

    Child Care Information Exchange, 1989

    1989-01-01

    Presents a variety of ideas and guidelines for day care directors on such topics as managing a procrastinator; improving annual reports; quality commandments; mini fiestas for children, parents, and teachers; selective reading for directors; morning exercise programs for the staff; and suggestions for successful fundraising. (BB)

  8. Bulletin Board Ideas.

    ERIC Educational Resources Information Center

    Kentucky State Dept. of Education, Frankfort.

    This compilation of ideas submitted by Kentucky teachers includes over 100 8-1/2 x 5 black and white designs for bulletin board displays, as well as a list of suggested materials, design tips, special techniques, and a bibliography of ERIC articles and documents. Subject areas covered include language arts, reading and library, math, social…

  9. Sharing Teaching Ideas.

    ERIC Educational Resources Information Center

    Mathematics Teacher, 1991

    1991-01-01

    Presented are two ideas to improve instruction. The first celebrates the Christmas birthday of Isaac Newton with an essay assignment related to Newton and a party. The second suggests a more appropriate moment to introduce the technique of completing the square to promote greater flexibility in factoring problems. (MDH)

  10. Sharing Teaching Ideas.

    ERIC Educational Resources Information Center

    Mathematics Teacher, 1986

    1986-01-01

    Presents ideas related to: (1) graphs (considering patterns, periodic functions, and problem-solving); (2) curing common errors (such as an incorrect way of canceling); (3) the median of a trapezoid; and (4) using a telephone directory to teach probability, graphing, random-number tables, reading tables, calculating percentages, and other topics.…

  11. The Force of Ideas

    ERIC Educational Resources Information Center

    Ascher, Carol

    2005-01-01

    "The Force of Ideas" describes a little-known aspect of both educational history and Viennese psychoanalysis during the interwar years: the movement for psychoanalytic pedagogy. The author traces her father's own story, beginning with his application to the Vienna Psychoanalytic Society for training as a psychoanalytic pedagogue, as a…

  12. A Sobering Big Idea

    ERIC Educational Resources Information Center

    Wineburg, Sam

    2006-01-01

    Since Susan Adler, Alberta Dougan, and Jesus Garcia like "big ideas," the author offers one to ponder: young people in this country can not read with comprehension. The saddest thing about this crisis is that it is no secret. The 2001 results of the National Assessment of Educational Progress (NAEP) for reading, published in every major…

  13. To Sell An Idea.

    ERIC Educational Resources Information Center

    Stone, Alan J.

    1986-01-01

    The experiences of Aurora University, a small university that not only raised money but established new links with donors, are described. The key to fund raising is selling an idea. As donors become more sophisticated, sentiment and traditional patterns play a less significant role in motivating donors. (MLW)

  14. Seeing Children's Ideas

    ERIC Educational Resources Information Center

    Curtis, Deb

    2012-01-01

    A group of toddlers was offered long, colorful, translucent tubes to enjoy and explore. As always, they amazed adults with the many ideas they used to investigate and learn with them. The tubes are long and the children marveled at how they could easily lift these objects up taller than their bodies. At the center of the children's explorations…

  15. 50 Practical Promotion Ideas.

    ERIC Educational Resources Information Center

    Madeyski, Tom

    1997-01-01

    Includes 50 cost-effective ideas for promoting camp in the areas of recruiting new campers, encouraging returning campers, advertising strategies, printing brochures and other written materials, using photographs, targeting groups for camp facility rental, and effectively using the media. (LP)

  16. Evaluating the PAS-SIM model using a passive air sampler calibration study for pesticides.

    PubMed

    Restrepo, Andrés Ramírez; Hayward, Stephen J; Armitage, James M; Wania, Frank

    2015-07-01

    The main objective of this study was to evaluate the performance of a model for simulating the uptake of various pesticides on passive air samplers (PAS). From 2006-2007 a series of PAS using XAD-resin were deployed at Egbert, a rural agricultural site in southern Ontario, Canada, to measure the uptake of pesticides for time periods ranging from two months to one year. A continuous increase in sequestered amounts was observed for most pesticides, except for trifluralin and pendimethalin, which could conceivably be subject to substantial degradation inside the sampler. Continuous low-volume active air samples taken during the same period, along with data on weather conditions, allowed for the simulation of the uptake of the pesticides using the model (PAS-SIM). The modelled accumulation of pesticides on the PAS over the deployment period was in good agreement with the experimental data in most cases (i.e., within a factor of two) providing insight into the uptake kinetics of this type of sampler in the field. Passive sampling rates (PSR, m(3) d(-1)) were determined from the empirical data generated for this study using three different methods and compared with the PSRs generated by the model. Overall, the PAS-SIM model, which is capable of accounting for the influence of temperature and wind variations on PSRs, provided reasonable results that range between the three empirical approaches employed and well-established literature values. Further evaluation and application of the PAS-SIM model to explore the potential spatial and temporal variability in PAS uptake kinetics is warranted, particularly for established monitoring sites where detailed meteorological data are more likely to be available.

  17. Innovative Ideas for Coordinating International Space Activities: International Center for Space Medicine, International Space Authority, and other Global Youth Space Initiatives

    NASA Astrophysics Data System (ADS)

    Marshall, W.

    2002-01-01

    The Space Generation Forum SGF, at UNISPACE-III, as one of its ten formal recommendations to the United Nations in 1999, put forward the suggestion that the an international space authority should be created. Other recommendations were the establishment of an International Center for Space Medicine, creation of a global space exploration and development program, establishment of a global space (Nobel) prize, and a global space library. These projects are being further developed at the Space Generation Summit (SGS), an event at World Space Congress (WSC) which shall unite international students and young professionals to develop a youth vision and strategy for the peaceful uses of space. SGS, endorsed by the United Nations, will take place from October 11- 13th, during which the 200 delegates will discuss ongoing youth space activities, particularly those stemming from the UNISPACE-III/SGF and taken forward by the Space Generation Advisory Council. Delegates will address a variety of topics with the goal of devising new recommendations according to the theme, 'Accelerating Our Pace in Space'. The material presented here and in other technical sessions throughout WSC includes the findings of these discussions. In this paper, we present the International Space Authority idea together with recommendations on how that might be taken forward. The purpose of such an organization would be to allow: 1. Oversight and enforcement for the balanced regulation of multiple interests in space 2. Access for all peoples to the material benefits and knowledge and understanding enabled by the exploration and 3. Pooling of national and industry resources for the creation of space infrastructure, missions and enterprises for Operating principles: 1. The ISA regulatory regime would encourage commercialization and the harnessing of competitive market 2. Consistent with its charter to ensure access to all peoples, all UN member states and appropriate NGOs would 3. Close coordination with

  18. Characteristics of Twenty-Nine Aerosol Samplers Tested at U.S. Army Edgewood Chemical Biological Center (2000-2006)

    DTIC Science & Technology

    2011-02-01

    Particles 7 3. Summary of Samplers that use Impingement or Impaction in Liquid to Collect Particles 7 4. Summary of Samplers that use Impaction on a...wetted surfaces. Impaction is the mechanism used in air samplers to remove unneeded large particles from the air. Particle deposition by interception...These sampler characteristics are given in Appendixes 6-7 and Table 2. c. Samplers that use impingement and/or impaction onto a wetted surface: SKC

  19. Evaluation of the INEL passive cryogenic whole air sampler

    SciTech Connect

    McManus, G.J.; Hohorst, F.A.; Bird, S.K.; Motes, B.G.; Fernandez, S.J.

    1993-06-01

    This report documents the results of an evaluation of a portable, passive cryogenic sampler designed for the collection of whole air samples without loss or concentration of any atmospheric constituents. The design criteria included: (a) sample volume capacity greater than 100 liters STP; (b) no concentration or loss of atmospheric constituents; (c) no vertical dimension greater than 50 cm or horizontal dimension greater than 15 cm; (d) operation without electrical power; (e)sampling lifetime greater than two hours; (f) total gross weight less than 20 kg; (g) resistance to undetected tampering. The sampler described in this report has been found to meet or exceed the design criteria once safety-related add-ons (rotameter, pressure relief valves, and base-plate) are either removed or redesigned for a smaller profile.

  20. Development of a high-volume air sampler for nanoparticles.

    PubMed

    Hata, M; Thongyen, T; Bao, L; Hoshino, A; Otani, Y; Ikeda, T; Furuuchi, M

    2013-02-01

    As a tool to evaluate the characteristics of aerosol nano-particles, a high-volume air sampler for the collection of nano-particles was developed based on the inertial filter technology. Instead of the webbed fiber geometry of the existing inertial filter, wire mesh screens alternately layered using spacing sheets with circular holes aligned to provide multi-circular nozzles were newly devised and the separation performance of the filter was investigated experimentally. The separation performance was evaluated for a single-nozzle inertial filter at different filtration velocities. A webbed stainless steel fiber mat attached on the inlet surface of the developed inertial filter was discussed as a pre-separator suppressing the bouncing of particles on meshes. The separation performance of a triple-nozzle inertial filter was also discussed to investigate the influence of scale-up on the separation performance of a multi-nozzle inertial filter. The influence of particle loading on the pressure drop and separation performance was discussed. A supplemental inlet for the nano-particle collection applied to an existing portable high-volume air sampler was devised and the consistency with other types of existing samplers was discussed based on the sampling of ambient particles. The layered-mesh inertial filter with a webbed stainless steel fiber mat as a pre-separator showed good performance in the separation of particles with a d p50 ranging from 150 to 190 nm keeping the influence of loaded particles small. The developed layered-mesh inertial filter was successfully applied to the collection of particles at a d p50∼ 190 nm that was consistent with the results from existing samplers.

  1. Integrated Seawater Sampler and Data Acquisition System Prototype

    DTIC Science & Technology

    1993-04-01

    sampling systems, such as CTD profilers interfaced to rosette samplers supporting Niskin or Go-Flo bottles , satisfy the sampling requirements of most ocean...CTD readings. The basic design of the Niskin bottle causes water leakage problems when water samples are collected on the downcast. To alleviate this...problems associated with the rubber diaphragms outweighed the gain, and unfortunately the downcast sampling with Niskin bottles was dropped. In a report on

  2. A carbon monoxide passive sampler: Research and development needs

    SciTech Connect

    Traynor, G.W.; Apte, M.G.; Diamond, R.C.; Woods, A.L.

    1991-11-01

    In rare instances, carbon monoxide (CO) levels in houses can reach dangerously high concentrations, causing adverse health effects ranging from mild headaches to, under extreme conditions, death. Hundreds of fatal accidental carbon monoxide poisonings occur each year primarily due to the indoor operation of motor vehicles, the indoor use of charcoal for cooking, the operation of malfunctioning vented and unvented combustion appliances, and the misuse combustion appliances. Because there is a lack of simple, inexpensive, and accurate field sampling instrumentation, it is difficult for gas utilities and researchers to conduct field research studies designed to quantify the concentrations of CO in residences. Determining the concentration of CO in residences is the first step towards identifying the high risk appliances and high-CO environments which pose health risks. Thus, there exists an urgent need to develop and field-validate a CO-quantifying technique suitable for affordable field research. A CO passive sampler, if developed, could fulfill these requirements. Existing CO monitoring techniques are discussed as well as three potential CO-detection methods for use in a CO passive sampler. Laboratory and field research needed for the development and validation of an effective and cost-efficient CO passive sampler are also discussed.

  3. Dynamic exposure of organisms and passive samplers to hydrophobic chemicals.

    PubMed

    Bayen, Stéphane; Ter Laak, Thomas L; Buffle, Jacques; Hermens, Joop L M

    2009-04-01

    An insight into the dynamic aspects of the accumulation process is essential for understanding bioaccumulation as well as effect studies of hydrophobic organic chemicals. This review presents an overview of kinetic studies with organisms (fish, bivalve, crustacean, insect, worm, algae, and protozoan) as well as passive samplers (solid and liquid phase microextraction, semipermeable membrane device, polymer sheet, solid-phase extraction, Chemcatcher, etc.) for the uptake of neutral nonpolar chemicals from the aqueous phase. Information about uptake rates, elimination rates, and 95% equilibration times was collected and analyzed with diffusion based models. The present literature review suggests that the surface to volume ratio appears to be a critical parameter for the uptake rate of the more hydrophobic chemicals both for samplers and organisms. In addition, as a very first approximation, the combination of the first-order kinetic model with the assumption that diffusion through the aqueous boundary layers is rate limiting, gives a reasonable description of the experimental kinetic data. In this way, the presented model might be used to estimate uptake and elimination rate constants of chemicals by organisms or passive samplers.

  4. Hydrothermal Vent Sampler: Does Life Exist in High Temperature Environments?

    NASA Technical Reports Server (NTRS)

    Rivadeneyra, Cesar R.

    2005-01-01

    The main purpose of this research is to search for the existence of biomass under extreme temperature and pressure conditions to determine the upper bounds of environments on which life can exist. Vents are, simply put, underwater volcano openings located at the bottom of the sea. The conditions at these locations are considerably extreme with pressures of up to 10,000 psi, and enormous temperature gradients. The temperature of the water near these vents is around 400 C, while that of the surrounding water is about 3 C. The extremity of these conditions makes it hard to estimate the existence of life in those environments. I n order to find whether such existence happens, we need to search for biomass inside these vents. The vent sampler is a device that has the purpose of safely and accurately collecting this biomass for examination. This sampler is constituted of a Series of filters of the order of 100-0.2 microns in size. Since this is a 3-year project, it has not concluded yet; however, during the time I contributed to this project, I worked with the mechanical design of this sampler device including the selection, assembly, and testing of the various subsystems and the design and construction of the electronics enclosure.

  5. A sampler for coring sediments in rivers and estuaries

    USGS Publications Warehouse

    Prych, Edmund A.; Hubbell, D.W.

    1966-01-01

    A portable sampler developed to core submerged unconsolidated sediments collects cores that are 180 cm long and 4.75cm in diameter. The sampler is used from a 12-m boat in water depths up to 20 m and in flow velocities up to 1.5m per second to sample river and estuarine deposits ranging from silty clay to medium sand. Even in sand that cannot be penetrated with conventional corers, the sampler achieves easy penetration through the combined application of vibration, suction, and axial force. A piston in the core barrel creates suction, and the suspension system is arranged so that tension on the support cable produces both a downward force on the core barrel and a lateral support against overturning. Samples are usually retained because of slight compaction in the driving head; as a precaution, however, the bottom of the core barrel is covered by a plate that closes after the barrel is withdrawn from the bed. Tests show that sample-retainers placed within the driving head restrict penetration and limit core lengths. Stratification within cores is disrupted little as a result of the sampling process.

  6. Filter and electrostatic samplers for semivolatile aerosols: physical artifacts.

    PubMed

    Volckens, John; Leith, David

    2002-11-01

    Adsorptive and evaporative artifacts often bias measurements of semivolatile aerosols. Adsorption occurs when the sampling method disrupts the gas-particle partitioning equilibrium. Evaporation occurs because concentrations of semivolatiles are rarely constant over time. Filtration is subject to both adsorptive and evaporative artifacts. By comparison, electrostatic precipitation reduces these artifacts by minimizing the surface area of collected particles without substantially disrupting the gas-particle equilibrium. The extent of these artifacts was determined for filter samplers and electrostatic precipitator samplers for semivolatile alkane aerosols in the laboratory. Adsorption of gas-phase semivolatiles was lower in electrostatic precipitators by factors of 5-100 compared to the filter method. Particle evaporation from the electrostatic sampler was 2.3 times lower than that from TFE-coated glass-fiber filters. Use of a backup filter to correct for compound-specific adsorption artifacts can introduce positive or negative errors to the measured particle-phase concentration due to competition among the adsorbates for available adsorption sites. Adsorption of evaporated particles from the front filter onto the backup filter increased the measured evaporative artifact by a factor of 1.5-2.

  7. Numerical determination of personal aerosol sampler aspiration efficiency.

    PubMed

    Lo Savio, Simone; Paradisi, Paolo; Tampieri, Francesco; Belosi, Franco; Morigi, Maria Pia; Agostini, Sergio

    2003-04-01

    In this work the determination of the aspiration efficiency of personal aerosol samplers, commonly used in occupational exposure assessment, is investigated by means of CFD techniques. Specifically, it will be described a code to calculate the particle trajectories in a given flow field. At the present state the code considers only the effects of the mean flow field on the particle motion, whereas the turbulent diffusion effects are neglected. Comparisons with experimental measurements are also given in the framework of a research contract, supported by the European Community, with several experimental contributions from the participants. The main objective of the European research is to develop a new approach to experimentation with airborne particle flows, working on a reduced scale. This methodology has the advantage of allowing real-time aerosol determination and use of small wind tunnels, with a better experimental control. In this article we describe how the methodology has been verified using computational fluid dynamics. Experimental and numerical aspiration efficiencies have been compared and the influence of gravity and turbulence intensity in full and reduced scale has been investigated. The numerical techniques described here are in agreement with previous similar research and allow at least qualitative predictions of aspiration efficiency for real samplers, taking care of orientation from the incoming air flow. The major discrepancies among predicted and experimental results may be a consequence of bounce effects, which are very difficult to eliminate also by greasing the sampler surface.

  8. Modeling uptake of hydrophobic organic contaminants into polyethylene passive samplers.

    PubMed

    Thompson, Jay M; Hsieh, Ching-Hong; Luthy, Richard G

    2015-02-17

    Single-phase passive samplers are gaining acceptance as a method to measure hydrophobic organic contaminant (HOC) concentration in water. Although the relationship between the HOC concentration in water and passive sampler is linear at equilibrium, mass transfer models are needed for nonequilibrium conditions. We report measurements of organochlorine pesticide diffusion and partition coefficients with respect to polyethylene (PE), and present a Fickian approach to modeling HOC uptake by PE in aqueous systems. The model is an analytic solution to Fick's second law applied through an aqueous diffusive boundary layer and a polyethylene layer. Comparisons of the model with existing methods indicate agreement at appropriate boundary conditions. Laboratory release experiments on the organochlorine pesticides DDT, DDE, DDD, and chlordane in well-mixed slurries support the model's applicability to aqueous systems. In general, the advantage of the model is its application in the cases of well-agitated systems, low values of polyethylene-water partioning coefficients, thick polyethylene relative to the boundary layer thickness, and/or short exposure times. Another significant advantage is the ability to estimate, or at least bound, the needed exposure time to reach a desired CPE without empirical model inputs. A further finding of this work is that polyethylene diffusivity does not vary by transport direction through the sampler thickness.

  9. Asynchronous signal-dependent non-uniform sampler

    NASA Astrophysics Data System (ADS)

    Can-Cimino, Azime; Chaparro, Luis F.; Sejdić, Ervin

    2014-05-01

    Analog sparse signals resulting from biomedical and sensing network applications are typically non-stationary with frequency-varying spectra. By ignoring that the maximum frequency of their spectra is changing, uniform sampling of sparse signals collects unnecessary samples in quiescent segments of the signal. A more appropriate sampling approach would be signal-dependent. Moreover, in many of these applications power consumption and analog processing are issues of great importance that need to be considered. In this paper we present a signal dependent non-uniform sampler that uses a Modified Asynchronous Sigma Delta Modulator which consumes low-power and can be processed using analog procedures. Using Prolate Spheroidal Wave Functions (PSWF) interpolation of the original signal is performed, thus giving an asynchronous analog to digital and digital to analog conversion. Stable solutions are obtained by using modulated PSWFs functions. The advantage of the adapted asynchronous sampler is that range of frequencies of the sparse signal is taken into account avoiding aliasing. Moreover, it requires saving only the zero-crossing times of the non-uniform samples, or their differences, and the reconstruction can be done using their quantized values and a PSWF-based interpolation. The range of frequencies analyzed can be changed and the sampler can be implemented as a bank of filters for unknown range of frequencies. The performance of the proposed algorithm is illustrated with an electroencephalogram (EEG) signal.

  10. Development and evaluation of an ultrasonic personal aerosol sampler.

    PubMed

    Volckens, J; Quinn, C; Leith, D; Mehaffy, J; Henry, C S; Miller-Lionberg, D

    2017-03-01

    Assessing personal exposure to air pollution has long proven challenging due to technological limitations posed by the samplers themselves. Historically, wearable aerosol monitors have proven to be expensive, noisy, and burdensome. The objective of this work was to develop a new type of wearable monitor, an ultrasonic personal aerosol sampler (UPAS), to overcome many of the technological limitations in personal exposure assessment. The UPAS is a time-integrated monitor that features a novel micropump that is virtually silent during operation. A suite of onboard environmental sensors integrated with this pump measure and record mass airflow (0.5-3.0 L/min, accurate within 5%), temperature, pressure, relative humidity, light intensity, and acceleration. Rapid development of the UPAS was made possible through recent advances in low-cost electronics, open-source programming platforms, and additive manufacturing for rapid prototyping. Interchangeable cyclone inlets provided a close match to the EPA PM2.5 mass criterion (within 5%) for device flows at either 1.0 or 2.0 L/min. Battery life varied from 23 to 45 hours depending on sample flow rate and selected filter media. Laboratory tests of the UPAS prototype demonstrate excellent agreement with equivalent federal reference method samplers for gravimetric analysis of PM2.5 across a broad range of concentrations.

  11. Birds Make Learning Easy. Science Sampler

    ERIC Educational Resources Information Center

    Parott, Joanne

    2004-01-01

    Through this middle school curriculum, students observe bird feeders outside their classrooms, learn to identify birds that visit, and use a simple protocol for counting the birds and collecting other data before sending it to Cornell scientists via the Internet. The activities within the curriculum are inquiry-based and interdisciplinary. This…

  12. Development of the Releasable Asbestos Field Sampler

    EPA Science Inventory

    A risk assessment for intermittent, low-level exposure to asbestos requires personal breathing concentration data. Currently, activity-based sampling (ABS) is the preferred approach to measurement of a person’s inhalation exposure; i.e., asbestos structures per cubic centimeter ...

  13. Auto-Gopher: a wireline deep sampler driven by piezoelectric percussive actuator and EM rotary motor

    NASA Astrophysics Data System (ADS)

    Badescu, Mircea; Ressa, Aaron; Lee, Hyeong Jae; Bar-Cohen, Yoseph; Sherrit, Stewart; Zacny, Kris; Paulsen, Gale L.; Beegle, Luther; Bao, Xiaoqi

    2013-04-01

    The ability to penetrate subsurfaces and perform sample acquisition at depth of meters may be critical for future NASA in-situ exploration missions to bodies in the solar system, including Mars and Europa. A corer/sampler was developed with the goal of enabling acquisition of samples from depths of several meters where if used on Mars would be beyond the oxidized and sterilized zone. For this purpose, we developed a rotary-hammering coring drill, called Auto-Gopher, which employs a piezoelectric actuated percussive mechanism for breaking formations and an electric motor that rotates the bit to remove the powdered cuttings. This sampler is a wireline mechanism that can be fed into and retrieved from the drilled hole using a winch and a cable. It includes an inchworm anchoring mechanism allowing the drill advancement and weight on bit control without twisting the reeling and power cables. The penetration rate is being optimized by simultaneously activating the percussive and rotary motions of the Auto-Gopher. The percussive mechanism is based on the Ultrasonic/Sonic Drill/Corer (USDC) mechanism that is driven by piezoelectric stack and that was demonstrated to require low axial preload. The design and fabrication of this device were presented in previous publications. This paper presents the results of laboratory and field tests and lessons learned from this development.

  14. Auto-Gopher: A Wireline Deep Sampler Driven by Piezoelectric Percussive Actuator and EM Rotary Motor

    NASA Technical Reports Server (NTRS)

    Badescu, Mircea; Ressa, Aaron; Jae Lee, Hyeong; Bar-Cohen, Yoseph; Sherrit, Stewart; Zacny, Kris; Paulsen, Gale L.; Beegle, Luther; Bao, Xiaoqi

    2013-01-01

    The ability to penetrate subsurfaces and perform sample acquisition at depth of meters may be critical for future NASA in-situ exploration missions to bodies in the solar system, including Mars and Europa. A corer/sampler was developed with the goal of enabling acquisition of samples from depths of several meters where if used on Mars would be beyond the oxidized and sterilized zone. For this purpose, we developed a rotary-hammering coring drill, called Auto-Gopher, which employs a piezoelectric actuated percussive mechanism for breaking formations and an electric motor that rotates the bit to remove the powdered cuttings. This sampler is a wireline mechanism that can be fed into and retrieved from the drilled hole using a winch and a cable. It includes an inchworm anchoring mechanism allowing the drill advancement and weight on bit control without twisting the reeling and power cables. The penetration rate is being optimized by simultaneously activating the percussive and rotary motions of the Auto-Gopher. The percussive mechanism is based on the Ultrasonic/Sonic Drill/Corer (USDC) mechanism that is driven by piezoelectric stack and that was demonstrated to require low axial preload. The design and fabrication of this device were presented in previous publications. This paper presents the results of laboratory and field tests and lessons learned from this development.

  15. Scoops of Ideas. Activities & Ideas for Individualized Instruction. K-6.

    ERIC Educational Resources Information Center

    Oklahoma State Dept. of Education, Oklahoma City.

    This handbook provides information on establishing and running learning centers in an elementary school classroom. A learning center is a station containing instruction and materials for one particular project. Every center should include multimedia and manipulative materials that support the topic or skill that is being focused upon. Students use…

  16. Validation of a radial diffusive sampler for measuring occupational exposure to 1,3-butadiene.

    PubMed

    Carrieri, Mariella; Bartolucci, Giovanni B; Paci, Enrico; Sacco, Paolo; Pigini, Daniela; Zaratin, Laura; Cottica, Danilo; Scapellato, Maria L; Tranfo, Giovanna

    2014-08-01

    1,3-Butadiene (BD) is a major industrial chemical used in the manufacture of rubbers and latexes; it is also a ubiquitous environmental pollutant whose major source is traffic. Occupational exposure to (BD) can occur both during its production and during its use as a raw material. The objective of the study was the laboratory and field validation of a new diffusive sampler for BD. The nominal sampling rate of the Radiello diffusive sampler filled with Carbopack X is 30.5 cm(3)/min, at 0.177 mg/m(3), 20 °C and 50% relative humidity (RH), for an 8-h exposure time. A model can be used for calculating the sampling rate as a function of temperature, time and RH. The concentration does not affect the sampling rate above 30 μg/m(3). The measurement uncertainty (k=2), calculated both by laboratory data and by field comparison according to International Standard Organization (ISO) 13752, satisfies the EN 482:2006 requirement for measurements between 0.1 and 0.5 times the threshold limit value-time weighted average (TLV-TWA) (uncertainty<50%). For field validation study, 38 workers exposed to BD and 20 administrative employees, as the control group, underwent environmental and biological monitoring. Personal exposure to BD was measured by diffusive samplers (Radiello) in comparison with active samplers. The BD exposure levels detected for the exposed subjects were low (mean 0.059, range <0.010-1.340 mg/m(3)) but higher than the controls levels, all below 0.010 mg/m(3). The comparison between diffusive and active (pumped) air sampling showed a good correlation, with no systematic deviation from the ideal values of the intercept and slope of the optimized regression line. The concentrations of two biomarkers were also determined on urine samples, collected at the end of the work-shift: unchanged BD, by GC-MS, and the metabolite dihydroxybutylmercapturic acid (DHBMA), by HPLC-MS/MS. The urinary excretion of the biomarkers was on average higher in the exposed group (urinary BD

  17. Summary report on the design of the retained gas sampler system (retained gas sampler, extruder and extractor)

    SciTech Connect

    Wootan, D.W.; Bolden, R.C.; Bridges, A.E.; Cannon, N.S.; Chastain, S.A.; Hey, B.E.; Knight, R.C.; Linschooten, C.G.; Pitner, A.L.; Webb, B.J.

    1994-09-29

    This document summarizes work performs in Fiscal Year 1994 to develop the three main components of Retained Gas Sampler System (RGSS). These primary components are the Retained Gas Sampler (RGS), the Retained Gas Extruder (RGE), and the Retained Gas Extractor (RGEx). The RGS is based on the Westinghouse Hanford Company (WHC) Universal Sampler design, and includes modifications to reduce gas leakage. The primary data priorities for the RGSS are to measure the void fraction and the flammable gas concentration in the waste sample. Significant progress has been made in developing the RGSS. The RGSS is being developed by WHC to extract a representative waste sample from a Flammable Gas Watch List Tanks and to measure both the amount and composition of free and {open_quotes}bound{close_quotes} gases. Sudden releases of flammable gas mixtures are a safety concern for normal waste storage operations and eventual waste retrieval. Flow visualization testing was used to identify important fluid dynamic issues related to the sampling process. The primary data priorities for the RGSS are to measure the void fraction and the flammable gas concentration in the waste sample. The safety analysis for the RGSS is being performed by Los Alamos National Laboratory and is more than sixty percent (60%) complete.

  18. Evaluation of the Snap Sampler for Sampling Ground Water Monitoring Wells for VOCs and Explosives

    DTIC Science & Technology

    2007-08-01

    ER D C/ CR R EL T R -0 7 -1 4 Evaluation of the Snap Sampler for Sampling Ground Water Monitoring Wells for VOCs and Explosives Louise...release; distribution is unlimited. ERDC/CRREL TR-07-14 August 2007 Evaluation of the Snap Sampler for Sampling Ground Water Monitoring...determine the ability of the Snap Sampler to recover representative concentrations of VOC and explosives in ground water . For the laboratory studies

  19. Demonstration/Validation of the Snap Sampler Passive Ground Water Sampling Device

    DTIC Science & Technology

    2011-06-01

    sampling 5. Carefully selecting a sampling order that reduces sampler impacts on subsequent sampling events. 6.1.2 Baseline Characterization Prior to...sampling • Carefully selecting a sampling order that reduces sampler impacts on subsequent sampling events. 27 6.2.2 Baseline...Validation of the Snap Sampler Passive Ground Water Sampling Device June 2011 i COST & PERFORMANCE REPORT Project: ER-200630 TABLE OF CONTENTS

  20. Assessment of field-related influences on polychlorinated biphenyl exposures and sorbent amendment using polychaete bioassays and passive sampler measurements

    USGS Publications Warehouse

    Janssen, E.M.; Oen, A.M.; Luoma, S.N.; Luthy, R.G.

    2011-01-01

    Field-related influences on polychlorinated biphenyl (PCB) exposure were evaluated by employing caged deposit-feeders, Neanthes arenaceodentata, along with polyoxymethylene (POM) samplers using parallel in situ and ex situ bioassays with homogenized untreated or activated carbon (AC) amended sediment. The AC amendment achieved a remedial efficiency in reducing bioaccumulation by 90% in the laboratory and by 44% in the field transplants. In situ measurements showed that PCB uptake by POM samplers was greater for POM placed in the surface sediment compared with the underlying AC amendment, suggesting that tidal exchange of surrounding material with similar PCB availability as untreated sediment was redeposited in the cages. Polychlorinated biphenyls bioaccumulation with caged polychaetes from untreated sediment was half as large under field conditions compared with laboratory conditions. A biodynamic model was used to confirm and quantify the different processes that could have influenced these results. Three factors appeared most influential in the bioassays: AC amendment significantly reduces bioavailability under laboratory and field conditions; sediment deposition within test cages in the field partially masks the remedial benefit of underlying AC-amended sediment; and deposit-feeders exhibit less PCB uptake from untreated sediment when feeding is reduced. Ex situ and in situ experiments inevitably show some differences that are associated with measurement methods and effects of the environment. Parallel ex situ and in situ bioassays, passive sampler measurements, and quantifying important processes with a model can tease apart these field influences. ?? 2010 SETAC.

  1. Uptake rate behavior of tube-type passive samplers for volatile organic compounds under controlled atmospheric conditions

    NASA Astrophysics Data System (ADS)

    Walgraeve, Christophe; Demeestere, Kristof; Dewulf, Jo; Van Huffel, Katrijn; Van Langenhove, Herman

    2011-10-01

    A systematic laboratory research was performed to investigate the diffusive uptake of four target compounds (limonene, toluene, ethyl acetate, hexane) on axial-sampling sorbent tubes filled with Tenax TA. In a controlled atmosphere (temperature: 21.0 ± 1.8 °C; relative humidity set at different values between 5 and 80%), these passive samplers were exposed for 1, 3 and 7 days to a constant target compound concentration between 8 and 85 ppbv. Simultaneous active sampling and TD-GC-MS analysis was performed to determine VOCs concentrations. A power-law relationship between the sorbed mass on the sampler and exposure dose (11-179 ppmv min) was observed for all compounds. Compounds with a lower Tenax to air partitioning coefficient, i.e. with a lower affinity for Tenax showed a larger deviation from the expected linear relationship, assuming theoretical sampling rates on an ideal sorbent. Results showed that experimentally determined uptake rates (0.90-2.12 ng (ppmv min)-1) may be up to a factor of 2 lower than the theoretical ideal sampling rates, calculated from the molecular diffusion coefficients and the geometrical parameters of the sampler. The applicability of internal standard calibration for passive sampling was evaluated and a practical methodology is proposed with ethylbenzene-d10 as an internal standard.

  2. A minimally invasive micro sampler for quantitative sampling with an ultrahigh-aspect-ratio microneedle and a PDMS actuator.

    PubMed

    Liu, Long; Wang, Yan; Yao, Jinyuan; Yang, Cuijun; Ding, Guifu

    2016-08-01

    This study describes a novel micro sampler consisting of an ultrahigh-aspect-ratio microneedle and a PDMS actuator. The microneedle was fabricated by a new method which introduced reshaped photoresist technology to form a flow channel inside. The microneedle includes two parts: shaft and pedestal. In this study, the shaft length is 1500 μm with a 45° taper angle on the tip and pedestal is 1000 μm. Besides, the shaft and pedestal are connected by an arc connection structure with a length of 600 μm. The microneedles have sufficient mechanical strength to insert into skin with a wide safety margin which was proved by mechanics tests. Moreover, a PDMS actuator with a chamber inside was designed and fabricated in this study. The chamber, acting as a reservoir in sampling process as well as providing power, was optimized by finite element analysis (FEA) to decrease dead volume and improve sampling precision. The micro sampler just needs finger press to activate the sampling process as well as used for quantitative micro injection to some extent. And a volume of 31.5 ± 0.8 μl blood was successfully sampled from the ear artery of a rabbit. This micro sampler is suitable for micro sampling for diagnose or therapy in biomedical field.

  3. Idea Generation Techniques for Sparking Creative Advertising Ideas.

    ERIC Educational Resources Information Center

    Marra, James L.

    In advertising, a creative idea can be defined as being right or on strategy in a unique way. For a copywriter, it is not easy to create an ad that has the "Big Idea" in it. Some helpful techniques that advertising students can use to generate creative ideas are (1) analogy, (2) forced relationships, (3) doing the opposite of what…

  4. Intercomparison of high-volume PM10 samplers at a site with high-particulate concentrations

    SciTech Connect

    Purdue, L.J.; Rodes, C.E.; Rehme, K.A.; Holland, D.M.; Bond, A.E.

    1986-01-01

    Commercially available high-volume PM10 samplers were intercompared at a site in Phoenix characterized by high concentrations of coarse particles. Over a 21-day period, Sierra Andersen 321A (SA 321A) samplers gave PM10 measurements 58% higher than the Wedding IP10 (WED) samplers and 16% higher than a SA 321A sampler that had an oil coating on the internal impaction surfaces of the inlet. WED samplers that were subjected to a simple brush-cleaning procedure after each sampling period gave PM10 results 16% higher than the WED samplers not subjected to cleaning. The oiled SA 321A sampler gave PM10 values 15% higher than the cleaned WED samplers. The results demonstrate that the SA 321A overestimates PM10 when sampling in an environment with high coarse-particle concentrations. The over collection results from pass-through of large particles, and can be minimized by oiling the internal impaction surfaces of the inlet. The WED sampler underestimates PM10 after several days of sampling in such an environment.

  5. Efficacy of a vacuum benthos sampler for collecting demersal fish eggs from gravel substratum

    USGS Publications Warehouse

    Ruetz, C. R.; Jennings, C.A.

    1997-01-01

    We used two densities of eggs (low=900 eggs/m2; high=5100 eggs/m2) in laboratory experiments to estimate the recovery efficiency of the Brown benthos sampler for collecting fish eggs from gravel substrate and to determine if differences (e.g., 5-fold) in egg density in the substratum could be detected with the sampler. The mean egg recovery efficiency of the sampler in the low and high density treatments was 30% (SE=8.7) and 35% (SE=3.8), respectively. The difference between the treatment means was not significant. Therefore, data from the two treatments were pooled and used to estimate the recovery efficiency of the sampler (32.7%, SE=4.4). However, we were able to detect a 5?? difference in the number of eggs collected with the sampler between the two treatments. Our estimate of the recovery efficiency of the sampler for collecting fish eggs was less than those reported for the sampler's efficiency for collecting benthic macroinvertebrates. The low recovery efficiency of the sampler for collecting fish eggs does not lessen the utility of the device. Rather, ecologists planning to use the sampler must estimate the recovery efficiency of target fauna, especially if density estimates are to be calculated, because recovery efficiency probably is less than 100%. ?? Munksgaard, 1997.

  6. Quartz measurement in coal dust with high-flow rate samplers: laboratory study.

    PubMed

    Lee, Taekhee; Lee, Eun Gyung; Kim, Seung Won; Chisholm, William P; Kashon, Michael; Harper, Martin

    2012-05-01

    A laboratory study was performed to measure quartz in coal dust using high-flow rate samplers (CIP10-R, GK2.69 cyclone, and FSP10 cyclone) and low-flow rate samplers [10-mm nylon and Higgins-Dewell type (BGI4L) cyclones] and to determine whether an increased mass collection from high-flow rate samplers would affect the subsequent quartz measurement by Fourier transform infrared (FTIR) and X-ray diffraction (XRD) analytical procedures. Two different sizes of coal dusts, mass median aerodynamic diameter 4.48 μm (Coal Dust A) and 2.33 μm (Coal Dust B), were aerosolized in a calm air chamber. The mass of coal dust collected by the samplers was measured gravimetrically, while the mass of quartz collected by the samplers was determined by FTIR (NIOSH Manual of Analytical Method 7603) and XRD (NIOSH Manual of Analytical Method 7500) after one of two different indirect preparations. Comparisons between high-flow rate samplers and low-flow rate samplers were made by calculating mass concentration ratios of coal dusts, net mass ratios of coal dusts, and quartz net mass. Mass concentrations of coal dust from the FSP10 cyclone were significantly higher than those from other samplers and mass concentrations of coal dust from 10-mm nylon cyclone were significantly lower than those from other samplers, while the CIP10-R, GK2.69, and BGI4L samplers did not show significant difference in the comparison of mass concentration of coal dusts. The BGI4L cyclone showed larger mass concentration of ∼9% compared to the 10-mm nylon cyclone. All cyclones provided dust mass concentrations that can be used in complying with the International Standard Organization standard for the determination of respirable dust concentration. The amount of coal dust collected from the high-flow rate samplers was found to be higher with a factor of 2-8 compared to the low-flow rate samplers but not in direct proportion of increased flow rates. The high-flow rate samplers collected more quartz compared to

  7. Modeling the uptake of neutral organic chemicals on XAD passive air samplers under variable temperatures, external wind speeds and ambient air concentrations (PAS-SIM).

    PubMed

    Armitage, James M; Hayward, Stephen J; Wania, Frank

    2013-01-01

    The main objective of this study was to evaluate the performance and demonstrate the utility of a fugacity-based model of XAD passive air samplers (XAD-PAS) designed to simulate the uptake of neutral organic chemicals under variable temperatures, external wind speeds and ambient air concentrations. The model (PAS-SIM) simulates the transport of the chemical across the air-side boundary layer and within the sampler medium, which is segmented into a user-defined number of thin layers. Model performance was evaluated using data for polychlorinated biphenyls (PCBs) and polycyclic aromatic hydrocarbons (PAHs) from a field calibration study (i.e., active and XAD-PAS data) conducted in Egbert, Ontario, Canada. With some exceptions, modeled PAS uptake curves are in good agreement with the empirical PAS data. The results are highly encouraging, given the uncertainty in the active air sampler data used as input and other uncertainties related to model parametrization (e.g., sampler-air partition coefficients, the influence of wind speed on sampling rates). The study supports the further development and evaluation of the PAS-SIM model as a diagnostic (e.g., to aid interpretation of calibration studies and monitoring data) and prognostic (e.g., to inform design of future passive air sampling campaigns) tool.

  8. Classroom Teacher's Idea Notebook.

    ERIC Educational Resources Information Center

    Blake, Norv; And Others

    1988-01-01

    Offers activities for high school and middle school classrooms. First activity deals with war crimes by projecting fictitious Soviet fighting in Afghanistan into the story of William Calley in Vietnam. Second activity uses the Underground Railroad during the U.S. Civil War in an interdisciplinary approach. Third activity is a self-discovery…

  9. Growing Ideas, 1990-1993.

    ERIC Educational Resources Information Center

    Pranis, Eve, Ed.

    1993-01-01

    This series of journals includes volumes 1-4 of "Growing Ideas," a journal of garden-based learning. Each issue provides instructional ideas, horticultural information and a forum for exchange among teachers using classroom gardening to stimulate learning. Ideas in each issue are separated into three sections. The "Green Tips"…

  10. Guiding New Product Idea Generation

    ERIC Educational Resources Information Center

    Park, Y.

    2003-01-01

    The creation of innovative ideas is the initial step in entrepreneurial practice and venture management. As the management of technology is now on the priority agenda of higher education institutions, there is a need to develop pedagogic schemes for idea generation. Despite its importance, the idea generation process is hard to systematize or to…

  11. Soil separator and sampler and method of sampling

    SciTech Connect

    O'Brien, Barry H; Ritter, Paul D

    2010-02-16

    A soil sampler includes a fluidized bed for receiving a soil sample. The fluidized bed may be in communication with a vacuum for drawing air through the fluidized bed and suspending particulate matter of the soil sample in the air. In a method of sampling, the air may be drawn across a filter, separating the particulate matter. Optionally, a baffle or a cyclone may be included within the fluidized bed for disentrainment, or dedusting, so only the finest particulate matter, including asbestos, will be trapped on the filter. The filter may be removable, and may be tested to determine the content of asbestos and other hazardous particulate matter in the soil sample.

  12. Application of semipermeable membrane devices (SPMDs) as passive air samplers

    USGS Publications Warehouse

    Petty, Jimmie D.; Huckins, James N.; Zajicek, James L.

    1993-01-01

    The semipermeable membrane device (SPMD), consisting of a neutral lipid (triolein) enclosed in polyethylene layflat tubing, is demonstrated to be a highly efficient passive air sampler. These devices readily sequester lipophilic organic contaminants from the vapor phase. Specifically, the SPMDs are shown to concentrate polychlorinated biphenyl (PCB) residues from a laboratory atmosphere in a linear manner through 28 days. Under the conditions of this study, a three device composite (1.4 g triolein) extracted PCB residues from ≈ 7 m3 of air per day.

  13. Performance of the Button Personal Inhalable Sampler for the measurement of outdoor aeroallergens

    NASA Astrophysics Data System (ADS)

    Adhikari, Atin; Martuzevicius, Dainius; Reponen, Tiina; Grinshpun, Sergey A.; Cho, Seung-Hyun; Sivasubramani, Satheesh K.; Zhong, Wei; Levin, Linda; Kelley, Anna L.; St. Clair, Harry G.; LeMasters, Grace

    No personal aerosol sampler has been evaluated for monitoring aeroallergens in outdoor field conditions and compared to conventional stationary aerobiological samplers. Recently developed Button Personal Inhalable Aerosol Sampler has demonstrated high sampling efficiency for non-biological particles and low sensitivity to the wind direction and velocity. The aim of the present study was to evaluate the Button Sampler for the measurement of outdoor pollen grains and fungal spores side-by-side with the widely used Rotorod Sampler. The sampling was performed for 8 months (spring, summer and fall) at a monitoring station on the roof of a two-storied office building located in the center of the city of Cincinnati. Two identical Button Samplers, one oriented towards the most prevalent wind and the other towards the opposite wind and a Rotorod Sampler were placed side-by-side. The total fungal spore concentration ranged from 129 to 12,980 spores m -3 (number per cubic meter of air) and the total pollen concentration from 4 to 4536 pollen m -3. The fungal spore concentrations obtained with the two Button Samplers correlated well ( r=0.95; p<0.0001). The pollen data also showed positive correlation. These findings strongly support the results of earlier studies conducted with non-biological aerosol particles, which demonstrated a low wind dependence of the performance of the Button Sampler compared to other samplers. The Button Sampler's inlet efficiency was found to be more dependent on wind direction when sampling larger sized Pinaceae pollen grains (aerodynamic diameter ≈65 μm). Compared to Rotorod, both Button Samplers measured significantly higher total fungal spore concentrations. For total pollen count, the Button Sampler facing the prevalent wind showed concentrations levels comparable to that of the Rotorod, but the Button Sampler oriented opposite to the prevalent wind demonstrated lower concentration levels. Overall, it was concluded that the Button Sampler is

  14. Field evaluation and calibration of a small axial passive air sampler for gaseous and particle bound polycyclic aromatic hydrocarbons (PAHs) and oxygenated PAHs.

    PubMed

    Magnusson, Roger; Arnoldsson, Kristina; Lejon, Christian; Hägglund, Lars; Wingfors, Håkan

    2016-09-01

    Polycyclic aromatic hydrocarbons (PAHs) and their oxygenated analogues (OPAHs) are ubiquitous air pollutants known to cause adverse health effects. PAH air levels are commonly monitored by active sampling but passive sampling has become popular because of its lower cost and simplicity, which facilitate long-term sampling and increased spatial coverage. However, passive samplers are less suitable for short-term sampling and are in general less accurate than active samplers because they require reliable sampling rate (Rs) measurements for individual analytes under diverse environmental conditions. In this study a small passive sampler designed to sample both particle-bound and gaseous compounds was evaluated and calibrated for PAHs and OPAHs in a traffic environment by co-deployment with active samplers for two weeks. Despite the relatively low average air concentrations of PM10 (20 μg/m(3)), PM2.5 (5 μg/m(3)), total PAHs (4.2 ng/m(3)), and OPAHs (2.3 ng/m(3)) at the site, detectable quantities (on average 24 times above blank values) of the full range of PAHs and OPAHs were captured, with low variability (average RSD of 16%). This was accomplished by using a Tenax(®) TA-modified glass fiber substrate that is compatible with highly sensitive thermal desorption GC-MS analysis, which made it possible to achieve detection limits per sample in the pg range. Experiments with inverted samplers revealed that the relative contribution of gravitational settling to the sampling of particles carrying PAHs and OPAHs was around 3.5 times larger than other deposition mechanisms. Average Rs values for individual OPAHs and PAHs were 0.046 ± 0.03 m(3)/day and 0.12 ± 0.07 m(3)/day, respectively, with no appreciable difference between the values for particle-associated and gaseous compounds. Furthermore, the Rs values were competitive with other currently used passive samplers if normalized for substrate area. Overall, the new sampler's performance, simplicity and

  15. Equilibration times, compound selectivity, and stability of diffusion samplers for collection of ground-water VOC concentrations

    USGS Publications Warehouse

    Vroblesky, D.A.; Campbell, T.R.

    2001-01-01

    Vapor-filled polyethylene diffusion samplers (typically used to locate discharge zones of volatile organic compound contaminated ground water beneath streams and lakes) and water-filled polyethylene diffusion bag samplers (typically used to obtain volatile organic compound concentrations in ground-water at wells) were tested to determine compound selectivity, equilibration times, and sample stability. The aqueous concentrations of several volatile organic compounds obtained from within water-filled diffusion samplers closely matched concentrations in ambient water outside the samplers. An exception was methyl-tert-butyl ether, which was detectable, but not reliably quantifiable using the diffusion samplers. The samplers equilibrated to a variety of volatile organic compounds within 24 h for vapor-filled passive diffusion vial samplers and within 48 h for water-filled passive diffusion bag samplers. Under field conditions, however, a longer equilibration time may be required to account for environmental disturbances caused by sampler deployment. An equilibrium period for both vapor- and water-filled diffusion samplers of approximately 2 weeks probably is adequate for most investigations in sandy formations. Longer times may be required for diffusion-sampler equilibration in poorly permeable sediment. The vapor-filled samplers should be capped and water from the diffusion bag samplers should be transferred to sampling vials immediately upon recovery to avoid volatilization losses of the gasses. ?? 2001 Elsevier Science Ltd.

  16. Middle Grades Ideas.

    ERIC Educational Resources Information Center

    Classroom Computer Learning, 1985

    1985-01-01

    Presents a collection of computer-oriented teaching activities for the middle grades. They focus on Logo activities to sharpen visualization skills, use of spreadsheets, various uses of Apple microcomputer paddles, and writing a program from program output. All activities may be adapted for lower or higher grade levels. (JN)

  17. Constantly stirred sorbent and continuous flow integrative sampler: new integrative samplers for the time weighted average water monitoring.

    PubMed

    Llorca, Julio; Gutiérrez, Cristina; Capilla, Elisabeth; Tortajada, Rafael; Sanjuán, Lorena; Fuentes, Alicia; Valor, Ignacio

    2009-07-31

    Two innovative integrative samplers have been developed enabling high sampling rates unaffected by turbulences (thus avoiding the use of performance reference compounds) and with negligible lag time values. The first, called the constantly stirred sorbent (CSS) consists of a rotator head that holds the sorbent. The rotation speed given to the head generates a constant turbulence around the sorbent making it independent of the external hydrodynamics. The second, called the continuous flow integrative sampler (CFIS) consists of a small peristaltic pump which produces a constant flow through a glass cell. The sorbent is located inside this cell. Although different sorbents can be used, poly(dimethylsiloxane) PDMS under the commercial twister format (typically used for stir bar sorptive extraction) was evaluated for the sampling of six polycyclic aromatic hydrocarbons and three organochlorine pesticides. These new devices have many analogies with passive samplers but cannot truly be defined as such since they need a small energy supply of around 0.5 W supplied by a battery. Sampling rates from 181 x 10(-3) to 791 x 10(-3) L/day were obtained with CSS and 18 x 10(-3) to 53 x 10(-3) with CFIS. Limits of detection for these devices are in the range from 0.3 to 544 pg/L with a precision below 20%. An in field evaluation for both devices was carried out for a 5 days sampling period in the outlet of a waste water treatment plant with comparable results to those obtained with a classical sampling method.

  18. Hayabusa2 Sampler: Collection of Asteroidal Surface Material

    NASA Astrophysics Data System (ADS)

    Sawada, Hirotaka; Okazaki, Ryuji; Tachibana, Shogo; Sakamoto, Kanako; Takano, Yoshinori; Okamoto, Chisato; Yano, Hajime; Miura, Yayoi; Abe, Masanao; Hasegawa, Sunao; Noguchi, Takaaki

    2017-02-01

    Japan Aerospace Exploration Agency (JAXA) launched the asteroid exploration probe "Hayabusa2" in December 3rd, 2014, following the 1st Hayabusa mission. With technological and scientific improvements from the Hayabusa probe, we plan to visit the C-type asteroid 162137 Ryugu (1999 JU3), and to sample surface materials of the C-type asteroid that is likely to be different from the S-type asteroid Itokawa and contain more pristine materials, including organic matter and/or hydrated minerals, than S-type asteroids. We developed the Hayabusa2 sampler to collect a minimum of 100 mg of surface samples including several mm-sized particles at three surface locations without any severe terrestrial contamination. The basic configuration of the sampler design is mainly as same as the 1st Hayabusa (Yano et al. in Science, 312(5778):1350-1353, 2006), with several minor but important modifications based on lessons learned from the Hayabusa to fulfill the scientific requirements and to raise the scientific value of the returned samples. In this paper, we will report the details of the sampling system of Hayabusa2 with results of performance tests during the development and the current status of the sampling system.

  19. Gradient-based MCMC samplers for dynamic causal modelling

    PubMed Central

    Sengupta, Biswa; Friston, Karl J.; Penny, Will D.

    2016-01-01

    In this technical note, we derive two MCMC (Markov chain Monte Carlo) samplers for dynamic causal models (DCMs). Specifically, we use (a) Hamiltonian MCMC (HMC-E) where sampling is simulated using Hamilton’s equation of motion and (b) Langevin Monte Carlo algorithm (LMC-R and LMC-E) that simulates the Langevin diffusion of samples using gradients either on a Euclidean (E) or on a Riemannian (R) manifold. While LMC-R requires minimal tuning, the implementation of HMC-E is heavily dependent on its tuning parameters. These parameters are therefore optimised by learning a Gaussian process model of the time-normalised sample correlation matrix. This allows one to formulate an objective function that balances tuning parameter exploration and exploitation, furnishing an intervention-free inference scheme. Using neural mass models (NMMs)—a class of biophysically motivated DCMs—we find that HMC-E is statistically more efficient than LMC-R (with a Riemannian metric); yet both gradient-based samplers are far superior to the random walk Metropolis algorithm, which proves inadequate to steer away from dynamical instability. PMID:26213349

  20. INNOVATIVE TECHNOLOGY EVALUATION REPORT, SEDIMENT SAMPLING TECHNOLOGY, ART'S MANUFACTURING, SPLIT CORE SAMPLER FOR SUBMERGED SEDIMENTS

    EPA Science Inventory


    The Split Core Sampler for Submerged Sediments (Split Core Sampler) designed and fabricated by Arts Manufacturing & Supply, Inc., was demonstrated under the U.S. Environmental Protection Agency (EPA) Superfund Innovative Technology Evaluation Program in April and May 1999 at ...

  1. Assessment of increased sampling pump flow rates in a disposable, inhalable aerosol sampler.

    PubMed

    Stewart, Justin; Sleeth, Darrah K; Handy, Rod G; Pahler, Leon F; Anthony, T Renee; Volckens, John

    2017-03-01

    A newly designed, low-cost, disposable inhalable aerosol sampler was developed to assess workers personal exposure to inhalable particles. This sampler was originally designed to operate at 10 L/min to increase sample mass and, therefore, improve analytical detection limits for filter-based methods. Computational fluid dynamics modeling revealed that sampler performance (relative to aerosol inhalability criteria) would not differ substantially at sampler flows of 2 and 10 L/min. With this in mind, the newly designed inhalable aerosol sampler was tested in a wind tunnel, simultaneously, at flows of 2 and 10 L/min flow. A mannequin was equipped with 6 sampler/pump assemblies (three pumps operated at 2 L/min and three pumps at 10 L/min) inside a wind tunnel, operated at 0.2 m/s, which has been shown to be a typical indoor workplace wind speed. In separate tests, four different particle sizes were injected to determine if the sampler's performance with the new 10 L/min flow rate significantly differed to that at 2 L/min. A comparison between inhalable mass concentrations using a Wilcoxon signed rank test found no significant difference in the concentration of particles sampled at 10 and 2 L/min for all particle sizes tested. Our results suggest that this new aerosol sampler is a versatile tool that can improve exposure assessment capabilities for the practicing industrial hygienist by improving the limit of detection and allowing for shorting sampling times.

  2. An Application of Passive Samplers to Understand Atmospheric Mercury Concentration and Dry Deposition Spatial Distributions

    EPA Science Inventory

    Two modified passive samplers were evaluated at multiple field locations. The sampling rate (SR) of the modified polyurethane foam (PUF)-disk passive sampler for total gaseous mercury (TGM) using gold-coated quartz fiber filters (GcQFF) and gaseous oxidized mercury (GOM) using io...

  3. 40 CFR 53.54 - Test for proper sampler operation following power interruptions.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... sampler's average flow rate, CV, and sample volume measurements. (iii) Accuracy of the sampler's reported... this test, an alternative certified flow measurement device may be used as long as appropriate volumetric flow rate corrections are made based on measurements of actual ambient temperature and...

  4. 40 CFR 53.54 - Test for proper sampler operation following power interruptions.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... sampler's average flow rate, CV, and sample volume measurements. (iii) Accuracy of the sampler's reported... this test, an alternative certified flow measurement device may be used as long as appropriate volumetric flow rate corrections are made based on measurements of actual ambient temperature and...

  5. 40 CFR 53.54 - Test for proper sampler operation following power interruptions.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... sampler's average flow rate, CV, and sample volume measurements. (iii) Accuracy of the sampler's reported... this test, an alternative certified flow measurement device may be used as long as appropriate volumetric flow rate corrections are made based on measurements of actual ambient temperature and...

  6. 40 CFR 53.59 - Aerosol transport test for Class I equivalent method samplers.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... air flow splitting components that may be used in a Class I candidate equivalent method sampler such... candidate samplers in which the aerosol flow path (the flow path through which sample air passes upstream of... through which sample air is flowing during performance of this test. (3) A no-flow filter is a...

  7. 40 CFR 53.54 - Test for proper sampler operation following power interruptions.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... sampler's average flow rate, CV, and sample volume measurements. (iii) Accuracy of the sampler's reported... this test, an alternative certified flow measurement device may be used as long as appropriate volumetric flow rate corrections are made based on measurements of actual ambient temperature and...

  8. 40 CFR 53.59 - Aerosol transport test for Class I equivalent method samplers.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... air flow splitting components that may be used in a Class I candidate equivalent method sampler such... candidate samplers in which the aerosol flow path (the flow path through which sample air passes upstream of... through which sample air is flowing during performance of this test. (3) A no-flow filter is a...

  9. 40 CFR 53.59 - Aerosol transport test for Class I equivalent method samplers.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... air flow splitting components that may be used in a Class I candidate equivalent method sampler such... candidate samplers in which the aerosol flow path (the flow path through which sample air passes upstream of... through which sample air is flowing during performance of this test. (3) A no-flow filter is a...

  10. Guidelines for Using Passive Samplers to Monitor Organic Contaminants at Superfund Sediment Sites

    EPA Science Inventory

    Passive samplers are monitoring tools that can provide faster, cheaper, and scientifically-sound information about the water column and interstitial water concentrations of contaminants of concern (COC) at Superfund sites. Often, the use of passive samplers is more effective tha...

  11. Evaluation of eight bioaerosol samplers challenged with aerosols of free bacteria.

    PubMed

    Jensen, P A; Todd, W F; Davis, G N; Scarpino, P V

    1992-10-01

    The need to quantify airborne microorganisms in the commercial microbiology industry (biotechnology) and during evaluations of indoor air quality, infectious disease outbreaks, and agriculture health investigations has shown there is a major technological void in bioaerosol sampling techniques to measure and identify viable and nonviable aerosols. As commercialization of microbiology increases and diversifies, it is increasingly necessary to assess occupational exposure to bioaerosols. Meaningful exposure estimates, by using area or environmental samplers, can only be ensured by the generation of data that are both precise and accurate. The Andersen six-stage viable (microbial) particle sizing sampler (6-STG) and the Ace Glass all-glass impinger-30 (AGI-30) have been suggested as the samplers of choice for the collection of viable microorganisms by the International Aerobiology Symposium and the American Conference of Governmental Industrial Hygienists. Some researchers consider these samplers inconvenient for evaluating industrial bioprocesses and indoor or outdoor environments. Alternative samplers for the collection of bioaerosols are available; however, limited information has been reported on their collection efficiencies. A study of the relative sampling efficiencies of eight bioaerosol samplers has been completed. Eight samplers were individually challenged with a bioaerosol, created with a Collison nebulizer, of either Bacillus subtilis or Escherichia coli. The samplers were evaluated under controlled conditions in a horizontal bioaerosol chamber. During each experimental run, simultaneous samples were collected with a reference AGI-30 to verify the concentration of microorganisms in the chamber from run to run and day to day.(ABSTRACT TRUNCATED AT 250 WORDS)

  12. Air sampling methodology for asphalt fume in asphalt production and asphalt roofing manufacturing facilities: total particulate sampler versus inhalable particulate sampler.

    PubMed

    Calzavara, Thomas S; Carter, Charles M; Axten, Charles

    2003-05-01

    In 2000, the American Conference of Governmental Industrial Hygienists (ACGIH(R)) changed its 1971 threshold limit value (TLV) for 8-hour time-weighted average (TWA) exposure to asphalt from 5 mg/m(3) total particulate (generally < or =40 micrometer [microm] diameter) to 0.5 mg/m(3) inhalable particulate (< or =100 microm aerodynamic diameter) as benzene-soluble aerosol. To date, no inhalable particulate sampling method has been standardized and validated for asphalt fume. Furthermore, much of the historical data were collected using total particulate samplers, and the comparability of total versus inhalable size fractions of asphalt fume is not known. Therefore, the present study compared results from two types of asphalt fume samplers: 1) a traditional total particulate sampler with a 37-mm filter in a closed-face cassette with a 4-mm orifice (NIOSH 5042) versus (2) an inhalable particulate sampler designed by the IOM with a 15-mm orifice. A total of 75 simultaneous pairs of samples were collected, including personal and area samples from 19 roofing and asphalt production facilities operated by 7 different manufacturers. Each sample was analyzed for total mass collected and for benzene-soluble mass. Data from the two sampling methods (total versus inhalable) were comparable for asphalt fumes up to an aerosol concentration of 10 mg/m(3). However, we conclude that the traditional total particulate method is preferable, for this reason: The vast majority of asphalt fume particles are <12.5 microm in diameter. The traditional sampler is designed to collect primarily particles < or =40 microm, while the IOM sampler is optimized for collecting particles < or =100 microm. Thus, the traditional sampler is less likely than the IOM sampler to collect the larger-size fraction of airborne particles, most of which are non-asphalt dust.

  13. Sharing Teaching Ideas.

    ERIC Educational Resources Information Center

    Mathematics Teacher, 1983

    1983-01-01

    Describes an activity which introduces students to each other while introducing the concept of Cartesian coordinates. Also describes an activity for finding the least common multiple, and computer programs (with listings) for generating shapes resembling windowpanes and for determining amounts wagered in a golf game. (JN)

  14. Upper Grades Ideas.

    ERIC Educational Resources Information Center

    Classroom Computer Learning, 1984

    1984-01-01

    Presents activities and program listings to print ASCII characters, examine the "IF" command (Pascal), change colors of a word on the screen (Atari), and to create a drawing tool for making designs (Logo). Also presents an activity on dummy sorting. (JN)

  15. Middle Grades Ideas.

    ERIC Educational Resources Information Center

    Classroom Computer Learning, 1984

    1984-01-01

    Presents five activities suitable for middle grades. These include listings for a car race (BASIC) and poetry (Pilot) programs, and activities on graphics without programing, new meanings (related to computers) of old words, and developing a list of historical events. (JN)

  16. Upper Grades Ideas.

    ERIC Educational Resources Information Center

    Classroom Computer Learning, 1985

    1985-01-01

    Describes computer-oriented teaching activities for the upper grades. They focus on the use of databases in history classes, checking taxes, examining aspects of the joystick button on Atari microcomputers, printing control using Logo, and a Logo program that draws whirling squares. All activities can be adapted for lower grades. (JN)

  17. Assembly, operation and disassembly manual for the Battelle Large Volume Water Sampler (BLVWS)

    SciTech Connect

    Thomas, V.W.; Campbell, R.M.

    1984-12-01

    Assembly, operation and disassembly of the Battelle Large Volume Water Sampler (BLVWS) are described in detail. Step by step instructions of assembly, general operation and disassembly are provided to allow an operator completely unfamiliar with the sampler to successfully apply the BLVWS to his research sampling needs. The sampler permits concentration of both particulate and dissolved radionuclides from large volumes of ocean and fresh water. The water sample passes through a filtration section for particle removal then through sorption or ion exchange beds where species of interest are removed. The sampler components which contact the water being sampled are constructed of polyvinylchloride (PVC). The sampler has been successfully applied to many sampling needs over the past fifteen years. 9 references, 8 figures.

  18. Silica Measurement with High Flow Rate Respirable Size Selective Samplers: A Field Study

    PubMed Central

    Lee, Taekhee; Harper, Martin; Kashon, Michael; Lee, Larry A.; Healy, Catherine B.; Coggins, Marie A.; Susi, Pam; O’Brien, Andrew

    2016-01-01

    High and low flow rate respirable size selective samplers including the CIP10-R (10 l min−1), FSP10 (11.2 l min−1), GK2.69 (4.4 l min−1), 10-mm nylon (1.7 l min−1), and Higgins-Dewell type (2.2 l min−1) were compared via side-by-side sampling in workplaces for respirable crystalline silica measurement. Sampling was conducted at eight different occupational sites in the USA and five different stonemasonry sites in Ireland. A total of 536 (268 pairs) personal samples and 55 area samples were collected. Gravimetric analysis was used to determine respirable dust mass and X-ray diffraction analysis was used to determine quartz mass. Ratios of respirable dust mass concentration, quartz mass concentration, respirable dust mass, and quartz mass from high and low flow rate samplers were compared. In general, samplers did not show significant differences greater than 30% in respirable dust mass concentration and quartz mass concentration when outliers (ratio <0.3 or >3.0) were removed from the analysis. The frequency of samples above the limit of detection and limit of quantification of quartz was significantly higher for the CIP10-R and FSP10 samplers compared to low flow rate samplers, while the GK2.69 cyclone did not show significant difference from low flow rate samplers. High flow rate samplers collected significantly more respirable dust and quartz than low flow rate samplers as expected indicating that utilizing high flow rate samplers might improve precision in quartz measurement. Although the samplers did not show significant differences in respirable dust and quartz concentrations, other practical attributes might make them more or less suitable for personal sampling. PMID:26608952

  19. Silica Measurement with High Flow Rate Respirable Size Selective Samplers: A Field Study.

    PubMed

    Lee, Taekhee; Harper, Martin; Kashon, Michael; Lee, Larry A; Healy, Catherine B; Coggins, Marie A; Susi, Pam; O'Brien, Andrew

    2016-04-01

    High and low flow rate respirable size selective samplers including the CIP10-R (10 l min(-1)), FSP10 (11.2 l min(-1)), GK2.69 (4.4 l min(-1)), 10-mm nylon (1.7 l min(-1)), and Higgins-Dewell type (2.2 l min(-1)) were compared via side-by-side sampling in workplaces for respirable crystalline silica measurement. Sampling was conducted at eight different occupational sites in the USA and five different stonemasonry sites in Ireland. A total of 536 (268 pairs) personal samples and 55 area samples were collected. Gravimetric analysis was used to determine respirable dust mass and X-ray diffraction analysis was used to determine quartz mass. Ratios of respirable dust mass concentration, quartz mass concentration, respirable dust mass, and quartz mass from high and low flow rate samplers were compared. In general, samplers did not show significant differences greater than 30% in respirable dust mass concentration and quartz mass concentration when outliers (ratio <0.3 or >3.0) were removed from the analysis. The frequency of samples above the limit of detection and limit of quantification of quartz was significantly higher for the CIP10-R and FSP10 samplers compared to low flow rate samplers, while the GK2.69 cyclone did not show significant difference from low flow rate samplers. High flow rate samplers collected significantly more respirable dust and quartz than low flow rate samplers as expected indicating that utilizing high flow rate samplers might improve precision in quartz measurement. Although the samplers did not show significant differences in respirable dust and quartz concentrations, other practical attributes might make them more or less suitable for personal sampling.

  20. Sharing Teaching Ideas.

    ERIC Educational Resources Information Center

    Hayek, Linda; Telford, William D., Jr.

    1993-01-01

    Presents two activities that utilize problem solving to promote concept development. The first uses a treasure hunt to teach locus of points. The second uses a tug-of-war model to teach mixture problems involving ratios. (MDH)

  1. Composting: Great Rotten Idea.

    ERIC Educational Resources Information Center

    Chemecology, 1992

    1992-01-01

    To help students investigate both the advantages and disadvantages of composting, various activities are presented dealing with the definitions and the applications of the concepts of recyclable and biodegradable. (MCO)

  2. Sharing Teaching Ideas.

    ERIC Educational Resources Information Center

    Hiatt, Arthur; Allen, William E.

    1994-01-01

    Includes two activities: (1) a skit to review variations of the trigonometric functions, and (2) a geometry problem about maximizing costs that exposes students to a variety of different solution strategies and makes the material more meaningful. (MKR)

  3. Idea Exchange: On Discrete.

    ERIC Educational Resources Information Center

    Crisler, Nancy; Froelich, Gary

    1990-01-01

    Discussed are summary recommendations concerning the integration of some aspects of discrete mathematics into existing secondary mathematics courses. Outlines of course activities are grouped into the three levels of prealgebra, algebra, and geometry. Some sample problems are included. (JJK)

  4. Ideas for the Accounting Classroom.

    ERIC Educational Resources Information Center

    Kerby, Debra; Romine, Jeff

    2003-01-01

    Innovative ideas for accounting education include having students study accounting across historical periods, using businesses for student research, exploring nontraditional accounting careers, and collaborating with professional associations. (SK)

  5. Beyond Idea Generation: The Power of Groups in Developing Ideas

    ERIC Educational Resources Information Center

    McMahon, Kibby; Ruggeri, Azzurra; Kämmer, Juliane E.; Katsikopoulos, Konstantinos V.

    2016-01-01

    Brainstorming research has claimed that individuals are more creative than groups. However, these conclusions are largely based on measuring creativity by the number of ideas generated, and researchers have tended to neglect other important components of creativity, such as the quality of developed ideas. These studies aim to address this gap in…

  6. Ideas Exchange: How Do You Use NASPE's Teacher Toolbox to Enhance Professional Activities with Students, Sport or Physical Education Lessons, Faculty Wellness Classes or Community Programs?

    ERIC Educational Resources Information Center

    Simpkins, Mary Ann; McNeill, Shane; Dieckman, Dale; Sissom, Mark; LoBianco, Judy; Lund, Jackie; Barney, David C.; Manson, Mara; Silva, Betsy

    2009-01-01

    NASPE's Teacher Toolbox is an instructional resource site which provides educators with a wide variety of teaching tools that focus on physical activity. This service is provided by NASPE to support instructional activities as well as promote quality programs. New monthly issues support NASPE's mission to enhance knowledge, improve professional…

  7. Get Moving! A Comparison of Ideas about Body, Health and Physical Activity in Materials Produced for Health Education in the Danish Primary School

    ERIC Educational Resources Information Center

    Svendsen, Annemari Munk

    2014-01-01

    In the debate over health, one political message has become more and more dominant in western societies over the past decade: "Get moving!" The logic seems to be that physical activity per se equals better health and that the more physical activity, the better one's health. This logic has, among other things, induced an increased…

  8. A sample-freezing drive shoe for a wire line piston core sampler

    USGS Publications Warehouse

    Murphy, F.; Herkelrath, W.N.

    1996-01-01

    Loss of fluids and samples during retrieval of cores of saturated, noncohesive sediments results in incorrect measures of fluid distributions and an inaccurate measure of the stratigraphic position of the sample. To reduce these errors, we developed a hollow drive shoe that freezes in place the lowest 3 inches (75 mm) of a 1.88-inch-diameter (48 mm), 5-foot-long (1.5 m) sediment sample taken using a commercial wire line piston core sampler. The end of the core is frozen by piping liquid carbon dioxide at ambient temperature through a steel tube from a bottle at the land surface to the drive shoe where it evaporates and expands, cooling the interior surface of the shoe to about -109??F (-78??C). Freezing a core end takes about 10 minutes. The device was used to collect samples for a study of oil-water-air distributions, and for studies of water chemistry and microbial activity in unconsolidated sediments at the site of an oil spill near Bemidji, Minnesota. Before freezing was employed, samples of sandy sediments from near the water table sometimes flowed out of the core barrel as the sampler was withdrawn. Freezing the bottom of the core allowed for the retention of all material that entered the core barrel and lessened the redistribution of fluids within the core. The device is useful in the unsaturated and shallow saturated zones, but does not freeze cores well at depths greater than about 20 feet (6 m) below water, possibly because the feed tube plugs with dry ice with increased exhaust back-pressure, or because sediment enters the annulus between the core barrel and the core barrel liner and blocks the exhaust.

  9. A sample-freezing drive shoe for a wire line piston core sampler

    SciTech Connect

    Murphy, F.; Herkelrath, W.N.

    1996-11-01

    Loss of fluids and samples during retrieval of cores of saturated, noncohesive sediments results in incorrect measures of fluid distributions and an inaccurate measure of the stratigraphic position of the sample. To reduce these errors, the authors developed a hollow drive shoe that freezes in place the lowest 3 inches (75 mm) of a 1.88-inch -diameter (48 mm), 5-foot-long (1.5 m) sediment sample taken using a commercial wire line piston core sampler. The end of the core is frozen by piping liquid carbon dioxide at ambient temperature through a steel tube from a bottle at the land surface to the drive shoe where it evaporates and expands, cooling the interior surface of the shoe to about {minus}109 F ({minus}78 C). Freezing a core end takes about 10 minutes. The device was used to collect samples for a study of oil-water-air distributions, and for studies of water chemistry and microbial activity in unconsolidated sediments at the site of an oil spill near Bemidji, Minnesota. Before freezing was employed, samples of sandy sediments from near the water table sometimes flowed out of the core barrel as the sampler was withdrawn. Freezing the bottom of the core allowed for the retention of all material that entered the core barrel and lessened the redistribution of fluids within the core. The device is useful in the unsaturated and shallow saturated zones, but does not freeze cores well at depths greater than about 20 feet (6 m) below water, possibly because the feed tube plugs with dry ice with increased exhaust back-pressure, or because sediment enters the annulus between the core barrel and the core barrel liner and blocks the exhaust.

  10. Where Do Ideas for Students Come From?

    ERIC Educational Resources Information Center

    Pushkin, David B.

    1997-01-01

    Recommends a constructivist approach to physics laboratory activities to make laboratories a place for personal maturation and cognitive growth. Describes class design in which ideas and techniques are exchanged which allow students the opportunity to initiate investigations based on early conceptual assumptions, and extend the investigation…

  11. Health Education Teaching Ideas: Elementary. Volume II.

    ERIC Educational Resources Information Center

    Hakala, Jane, Ed.; Buckner, W. P., Jr., Ed.; King, Karen, Ed.

    This guide contains innovative learning activities and teaching ideas to enhance classroom instruction. The 40 papers are divided into 12 areas: "Health Attitudes and Values" (e.g., understanding elementary students' perceptions of health through art, narrative and discussion); "Mental Health" (e.g., building community through…

  12. Fiches Pratiques (Practical Ideas).

    ERIC Educational Resources Information Center

    Parizet, Marie-Louise; And Others

    1996-01-01

    Discusses various class activities conducive to second-language learning. These include working on a legal document, group singing, a presentation on environmental pollution resulting from plastic bags, and listening to a tape on an organization and then posing and answering questions regarding dealings with that group. (CK)

  13. Classroom Idea-Sparkers

    ERIC Educational Resources Information Center

    Dettore, Ernie

    2004-01-01

    Introducing nursery rhymes to young children can inspire them to explore language and motivate them to explore word play further in meaningful experiences (like cooking) that can be integrated into all aspects of the curriculum. Whether they slice, dice, or add allspice, these actions are appealing, because they contain many activities that help…

  14. Early Grades Ideas.

    ERIC Educational Resources Information Center

    Classroom Computer Learning, 1985

    1985-01-01

    Presents a collection of computer-oriented teaching activities for the early grades. They include creating musical tones using Atari PILOT, a simulation of traffic lights, teacher-friendly password protection, drawing the alphabet using Logo, and using the Commodore 64's special character graphics. (JN)

  15. Early Grades Ideas.

    ERIC Educational Resources Information Center

    Classroom Computer Learning, 1984

    1984-01-01

    Presents computer-oriented teaching suggestions suitable for early grades. They include creating houses and stained glass ornaments using Logo, recording class activities with a database management program, making mazes with graphics programs, making drawings with a KoalaPad, and using a program to introduce computers to non-English speaking…

  16. Upper Grades Ideas.

    ERIC Educational Resources Information Center

    Classroom Computer Learning, 1985

    1985-01-01

    Presents four teaching activities (suitable for high school students) which focus on: use of LOGO paddles; a database of student interests (to use in career-oriented units/projects); probability related to two or more students having the same birthday; and reading of print statements on the monitor. (JN)

  17. Early Grades Ideas.

    ERIC Educational Resources Information Center

    Classroom Computer Learning, 1984

    1984-01-01

    Presents six computer-oriented classroom activities. They include: surveying a house for products using microprocessors, writing a program to display a flag, experimenting with LOGO's graphics capabilities, writing stories on the computer, using FOR/NEXT commands to create a blinking object, and teaching the Milton Bradley Big Trak to play…

  18. Classroom Teacher's "Idea" Notebook.

    ERIC Educational Resources Information Center

    Campanella, Alfred J.; And Others

    1983-01-01

    A scavenger hunt can be used to help secondary students develop social skills and experiential background knowledge, and a key word can help them develop better notetaking skills with audiovisual aids. A variety of activities can be used to sensitize elementary students to the visually and aurally disabled. (AM)

  19. Middle Grades Ideas.

    ERIC Educational Resources Information Center

    Classroom Computer Learning, 1984

    1984-01-01

    Six practical computer-oriented classroom activities are presented. They include making cryptograms using the search-and-replace function of word processors, making a frame for a Logo picture, examining Atari POKE commands, and comparing equivalent commands on different microcomputers. Also indicates the usefulness of marking on monitors with…

  20. Fiches Pratiques (Practical Ideas).

    ERIC Educational Resources Information Center

    Sobre Casa De Jorquera, Maria Florencia; And Others

    1996-01-01

    Presents various activities designed to foster the learning of a language. These include the use of everyday "street words" taught to advanced level students, the use of political speeches of French presidential candidates in order to familiarize advanced adolescents with political discourse, and the playing of cassette tapes and videos…

  1. Untangling Geometric Ideas

    ERIC Educational Resources Information Center

    Burgess, Claudia R.

    2014-01-01

    Designed for a broad audience, including educators, camp directors, afterschool coordinators, and preservice teachers, this investigation aims to help individuals experience mathematics in unconventional and exciting ways by engaging them in the physical activity of building geometric shapes using ropes. Through this engagement, the author…

  2. Field tests of nylon-screen diffusion samplers and pushpoint samplers for detection of metals in sediment pore water, Ashland and Clinton, Massachusetts, 2003

    USGS Publications Warehouse

    Zimmerman, Marc J.; Vroblesky, Don A.; Campo, Kimberly W.; Massey, Andrew J.; Scheible, Walter

    2005-01-01

    Efficient and economical screening methods are needed to detect and to determine the approximate concentrations of potentially toxic trace-element metals in shallow groundwater- discharge areas (pore water) where the metals may pose threats to aquatic organisms; such areas are likely to be near hazardous-waste sites. Pushpoint and nylon-screen diffusion samplers are two complementary options for use in such environments. The pushpoint sampler, a simple well point, is easy to insert manually and to use. Only 1 day is required to collect samples. The nylon-screen diffusion sampler is well suited for use in sediments that do not allow a pump to draw water into a pushpoint sampler. In this study, both types of devices were used in sediments suitable for the use of the pushpoint sampler. Sampling with the nylon-screen diffusion sampler requires at least two site visits: one to deploy the samplers in the sediment, and a second to retrieve the samplers and collect the samples after a predetermined equilibration period. Extensive laboratory quality-control studies, field testing, and laboratory analysis of samples collected at the Nyanza Chemical Waste Dump Superfund site along the Sudbury River in Ashland, Massachusetts, and at a Superfund site-assessment location on Rigby Brook in Clinton, Massachusetts, indicate that these two devices yield comparable results for most metals and should be effective tools for pore-water studies. The nylon-screen diffusion samplers equilibrated within 1-2 days in homogeneous, controlled conditions in the laboratory. Nylon-screen diffusion samplers that were not purged of dissolved oxygen prior to deployment yielded results similar to those that were purged. Further testing of the nylon-screen diffusion samplers in homogeneous media would help to resolve any ambiguities about the data variability from the field studies. Comparison of data from replicate samples taken in both study areas shows that even samples taken from sites within a

  3. Copper emissions from a high volume air sampler

    NASA Technical Reports Server (NTRS)

    King, R. B.; Toma, J.

    1975-01-01

    High volume air samplers (hi vols) are described which utilize a brush-type electric motor to power the fans used for pulling air through the filter. Anomalously high copper values were attributed to removal of copper from the commutator into the air stream due to arcing of the brushes and recirculation through the filter. Duplicate hi vols were set up under three operating conditions: (1) unmodified; (2) gasketed to prevent internal recirculation; and (3) gasketed and provided with a pipe to transport the motor exhaust some 20 feet away. The results of 5 days' operation demonstrate that hi vols can suddenly start emitting increased amounts of copper with no discernible operational indication, and that recirculation and capture on the filter can take place. Copper levels found with hi vols whose exhaust was discharged at a distance downwind were among the lowest found, and apparently provides a satisfactory solution to copper contamination.

  4. A simple pore water hydrogen diffusion syringe sampler

    USGS Publications Warehouse

    Vroblesky, D.A.; Chapelle, F.H.; Bradley, P.M.

    2007-01-01

    Molecular hydrogen (H2) is an important intermediate product and electron donor in microbial metabolism. Concentrations of dissolved H 2 are often diagnostic of the predominant terminal electron-accepting processes in ground water systems or aquatic sediments. H2 concentrations are routinely measured in ground water monitoring wells but are rarely measured in saturated aquatic sediments due to a lack of simple and practical sampling methods. This report describes the design and development (including laboratory and field testing) of a simple, syringe-based H 2 sampler in (1) saturated, riparian sediments, (2) surface water bed sediments, and (3) packed intervals of a fractured bedrock borehole that are inaccessible by standard pumped methods. ?? 2007 National Ground Water Association.

  5. DNAPL characterization using the Ribbon NAPL sampler: Methods and results

    SciTech Connect

    Riha, B.D.

    2000-04-25

    The Ribbon NAPL Sampler (RNS) is a direct sampling device that provides detailed depth discrete mapping of Non Aqueous Phase Liquids (NAPLs) in a borehole. This characterization method provides a yes or no answer to the presence of NAPLs and is used to complement and enhance other characterization techniques. Several cone penetrometer deployment methods are in use and methods for other drilling techniques are under development. The RNS has been deployed in the vadose and saturated zones at four different sites. Three of the sites contain DNAPLs from cleaning and degreasing operations and the fourth site contains creosote from a wood preserving plant. A brief description of the process history and geology is provided for each site. Where available, lithology and contaminant concentration information is provided and discussed in context with the RNS results.

  6. Two-Stage Variable Sample-Rate Conversion System

    NASA Technical Reports Server (NTRS)

    Tkacenko, Andre

    2009-01-01

    A two-stage variable sample-rate conversion (SRC) system has been pro posed as part of a digital signal-processing system in a digital com munication radio receiver that utilizes a variety of data rates. The proposed system would be used as an interface between (1) an analog- todigital converter used in the front end of the receiver to sample an intermediatefrequency signal at a fixed input rate and (2) digita lly implemented tracking loops in subsequent stages that operate at v arious sample rates that are generally lower than the input sample r ate. This Two-Stage System would be capable of converting from an input sample rate to a desired lower output sample rate that could be var iable and not necessarily a rational fraction of the input rate.

  7. Operating manual for Ford's Farm Range air samplers

    SciTech Connect

    Glissmeyer, J.A.; Halverson, M.A.

    1980-10-01

    An air-sampling program was designed for a target enclosure at the Ford's Farm Range, Aberdeen Proving Ground, Maryland, where the Army test-fires tungsten and depleted-uranium armor penetrators. The primary potential particle inhalation hazard is depleted uranium. The sampling program includes workplace and filtered exhaust air sampling. Conventional isokinetic stack sampling was employed for the filtered exhaust air. Because of the need for rapid monitor response to concentration increases and decreases, conventional radioactive particle monitors were not used. Instead, real-time aerosol monitors employing a light-scattering technique were used for monitors requiring a fast response. For other monitoring functions, piezoelectric and beta-attenuation respirable-particle sampling techniques were used. The application of these technologies to the monitoring of airborne radioactive contaminants is addressed. Sampler installation and operation are detailed.

  8. Albatrosses as Ocean Samplers of Sea Surface Temperature

    NASA Astrophysics Data System (ADS)

    Shaffer, S. A.; Kappes, M.; Tremblay, Y.; Costa, D. P.; Weber, R.; Weimerskirch, H.

    2006-12-01

    Albatrosses are unique ocean voyagers because they range so widely and travel at speeds exceeding 90 km per hour. Because they can integrate vast areas of open-ocean, albatrosses are ideal ocean samplers. Between 2003 and 2005 breeding seasons, 21 Laysan and 15 black-footed albatrosses (body mass 2.5 to 3.5 kg) were equipped with 6 g leg-mounted geolocation archival data loggers at Tern Island, French Frigate Shoals, Northwest Hawaiian Islands. The tags sampled environmental temperatures every 480 or 540 s and provided a single location per day for the duration of deployment. Whenever an albatross landed on the sea surface to feed or rest, the tag sampled sea surface temperature (SST). After nearly one year of deployment, 31 albatrosses were recaptured and 29 tags provided complete records. A total of 377,455 SST readings were obtained over 7,360 bird-days at sea. Given the location errors in the geolocation methodology (200 km) and the lack of temporal resolution (1 location per day), the SST measurements can only be used to characterize broad-scale correlates between albatross distribution and the ocean environment. However, in February 2006, we deployed 45 g GPS data loggers on 10 breeding albatrosses for 2-4 day deployments. The GPS loggers were attached to feathers on the albatrosses backs, they sampled every 10 s, and were accurate to within 10 m. One albatross was also equipped with the same leg-mounted archival tag that sampled SST every 8 s. This albatross collected 6,289 SST measurements with complementary GPS quality locations in 3 days at sea. These results highlight the efficacy of albatrosses as ocean samplers. Given that Laysan and black- footed albatrosses range throughout the North Pacific Ocean, it is conceivable that these seabirds could someday become sentinels of changing oceanic conditions. Moreover, these technologies provide exciting new information about the oceanic habitats of North Pacific albatrosses.

  9. Determining the spatial variability of personal sampler inlet locations

    SciTech Connect

    Vinson, R.; Volkwein, J.; Mcwilliams, L.

    2007-09-15

    This article examines the spatial variability of dust concentrations within a coal miner's breathing zone and the impact of sampling location at the cap lamp, nose, and lapel. Tests were conducted in the National Institute for Safety and Health Pittsburgh Research Laboratory full-scale, continuous miner gallery using three prototype personal dust monitors (PDM). The dust masses detected by the PDMs were used to calculate the percentage difference of dust mass between the cap lamp and the nose and between the lapel and the nose. The calculated percentage differences of the masses ranged from plus 12% to minus 25%. Breathing zone tests were also conducted in four underground coal mines using the torso of a mannequin to simulate a miner. Coal mine dust was sampled with multi-cyclone sampling cans mounted directly in front of the mannequin near the cap lamp, nose, and lapel. These four coal mine tests found that the spatial variability of dust levels and imprecision of the current personal sampler is a greater influence than the sampler location within the breathing zone. However, a one-sample t-test of this data did find that the overall mean value of the cap lamp/nose ratio was not significantly different than 1 (p-value = 0.21). However; when applied to the overall mean value of the lapel/nose ratio there was a significant difference from 1 (p-value < 0.0001). This finding is important because the lapel has always been the sampling location for coal mine dust samples. But these results suggest that the cap location is slightly more indicative of what is breathed through the nose area.

  10. Determining the spatial variability of personal sampler inlet locations.

    PubMed

    Vinson, Robert; Volkwein, Jon; McWilliams, Linda

    2007-09-01

    This article examines the spatial variability of dust concentrations within a coal miner's breathing zone and the impact of sampling location at the cap lamp, nose, and lapel. Tests were conducted in the National Institute for Safety and Health Pittsburgh Research Laboratory full-scale, continuous miner gallery using three prototype personal dust monitors (PDM). The dust masses detected by the PDMs were used to calculate the percentage difference of dust mass between the cap lamp and the nose and between the lapel and the nose. The calculated percentage differences of the masses ranged from plus 12% to minus 25%. Breathing zone tests were also conducted in four underground coal mines using the torso of a mannequin to simulate a miner. Coal mine dust was sampled with multi-cyclone sampling cans mounted directly in front of the mannequin near the cap lamp, nose, and lapel. These four coal mine tests found that the spatial variability of dust levels and imprecision of the current personal sampler is a greater influence than the sampler location within the breathing zone. However, a one-sample t-test of this data did find that the overall mean value of the cap lamp/nose ratio was not significantly different than 1 (p-value = 0.21). However, when applied to the overall mean value of the lapel/nose ratio there was a significant difference from 1 (p-value < .0001). This finding is important because the lapel has always been the sampling location for coal mine dust samples. But these results suggest that the cap location is slightly more indicative of what is breathed through the nose area.

  11. Design Optimization of a Portable Thermophoretic Precipitator Nanoparticle Sampler

    PubMed Central

    Miller, Art; Marinos, Alek; Wendel, Chris; King, Grant; Bugarski, Aleksandar

    2015-01-01

    Researchers at the National Institute for Occupational Safety and Health (NIOSH) are developing methods for characterizing diesel particulate matter in mines. Introduction of novel engine and exhaust after treatment technologies in underground mines is changing the nature of diesel emissions, and metrics alternative to the traditional mass-based measurements are being investigated with respect to their ability to capture changes in the properties of diesel aerosols. The emphasis is given to metrics based on measurement of number and surface area concentrations, but analysis of collected particles using electron microscopy (EM) is also employed for detailed particle characterization. To collect samples for EM analysis at remote workplaces, including mining and manufacturing facilities, NIOSH is developing portable particle samplers capable of collecting airborne nano-scale particles. This paper describes the design, construction, and testing of a prototype thermophoretic precipitator (TP) particle sampler optimized for collection of particles in the size range of 1–300 nm. The device comprises heated and cooled metal plates separated by a 0.8 mm channel through which aerosol is drawn by a pump. It weighs about 2 kg, has a total footprint of 27 × 22 cm, and the collection plate size is approximately 4 × 8 cm. Low power consumption and enhanced portability were achieved by using moderate flow rates (50–150 cm3/min) and temperature gradients (10–50 K/mm with ΔT between 8 K and 40 K). The collection efficiency of the prototype, measured with a condensation particle counter using laboratory-generated polydisperse submicrometer NaCl aerosols, ranged from 14–99%, depending on temperature gradient and flow rate. Analysis of transmission electron microscopy images of samples collected with the TP confirmed that the size distributions of collected particles determined using EM are in good agreement with those determined using a Fast Mobility Particle Sizer. PMID

  12. Use of dust fall filters as passive samplers for metal concentrations in air for communities near contaminated mine tailings.

    PubMed

    Beamer, P I; Sugeng, A J; Kelly, M D; Lothrop, N; Klimecki, W; Wilkinson, S T; Loh, M

    2014-05-01

    Mine tailings are a source of metal exposures in many rural communities. Multiple air samples are necessary to assess the extent of exposures and factors contributing to these exposures. However, air sampling equipment is costly and requires trained personnel to obtain measurements, limiting the number of samples that can be collected. Simple, low-cost methods are needed to allow for increased sample collection. The objective of our study was to assess if dust fall filters can serve as passive air samplers and be used to characterize potential exposures in a community near contaminated mine tailings. We placed filters in cylinders, concurrently with active indoor air samplers, in 10 occupied homes. We calculated an estimated flow rate by dividing the mass on each dust fall filter by the bulk air concentration and the sampling duration. The mean estimated flow rate for dust fall filters was significantly different during sampling periods with precipitation. The estimated flow rate was used to estimate metal concentration in the air of these homes, as well as in 31 additional homes in another rural community impacted by contaminated mine tailings. The estimated air concentrations had a significant linear association with the measured air concentrations for beryllium, manganese and arsenic (p < 0.05), whose primary source in indoor air is resuspended soil from outdoors. In the second rural community, our estimated metal concentrations in air were comparable to active air sampling measurements taken previously. This passive air sampler is a simple low-cost method to assess potential exposures near contaminated mining sites.

  13. Students' Ideas and Radical Constructivism

    ERIC Educational Resources Information Center

    Sánchez Gómez, Pedro J.

    2016-01-01

    In this article, I study, from the point of view of the analytic philosophy of mind, the compatibility of students' ideas studies (SIS) with radical constructivism (RC). I demonstrate that RC is based on a psychology of "narrow mental states"; that is, the idea that the mental content of an individual can be fully characterised without…

  14. Essential Ideas for Healthy Childhoods

    ERIC Educational Resources Information Center

    Exchange: The Early Childhood Leaders' Magazine Since 1978, 2012

    2012-01-01

    This article presents essential ideas from various people on how to cultivate healthy childhood. Amelia Gambetti says that in terms of young children, the element of complexity offers to them the possibility to have an opportunity to learn how to think and to generate ideas. Diane Levin shares how a three-year-old kid taught her that children do…

  15. Bright ideas and their architects

    NASA Astrophysics Data System (ADS)

    Mann, Tony

    2016-12-01

    Stephen Wolfram was a child prodigy, receiving his PhD in particle physics at the age of 20. But you don't need to know about his achievements to read Wolfram's latest book Idea Makers: Personal Perspectives on the Lives and Ideas of Some Notable People.

  16. Field intercomparison of precipitation samplers for assessing wet deposition of organic contaminants. Final report

    SciTech Connect

    Eisenreich, S.J.; Franz, T.P.; Swanson, M.B.

    1990-03-01

    A field intercomparison of four wet-only precipitation samplers were performed to assess their ability to efficiently collect rain and selected organic contaminants. Samplers are evaluated and compared on the basis of their ability to efficiently collect rainfall, exhibit mechanical reliability, demonstrate adequate operational characteristics and provide precise measures of wet-only inputs. The most significant difference between the four samplers was their mechanical reliability in the field. The samplers performed equally well in assessing organic concentrations in rain. The sampler intercomparison was conducted in part to select the preferred characteristics of a rain sampler that must be deployed in the field unattended for up to two weeks. The MIC sampler, properly maintained, is suitable for such a purpose. Of the two modes of compound isolation tested, the resin adsorbent (XAD-2) exhibited modestly higher concentrations that the solvent MIC but had the disadvantage of ease of sample handling and lower blanks. Both could be operated with proper maintance to provide precise data. The stainless steel and Teflon coated funnel surfaces provided comparable data.

  17. Time-weighted average water sampling in Lake Ontario with solid-phase microextraction passive samplers.

    PubMed

    Ouyang, Gangfeng; Zhao, Wennan; Bragg, Leslie; Qin, Zhipei; Alaee, Mehran; Pawliszyn, Janusz

    2007-06-01

    In this study, three types of solid-phase microextraction (SPME) passive samplers, including a fiber-retracted device, a polydimethylsiloxane (PDMS)-rod and a PDMS-membrane, were evaluated to determine the time weighted average (TWA) concentrations of polycyclic aromatic hydrocarbons (PAHs) in Hamilton Harbor (the western tip of Lake Ontario, ON, Canada). Field trials demonstrated that these types of SPME samplers are suitable for the long-term monitoring of organic pollutants in water. These samplers possess all of the advantages of SPME: they are solvent-free, sampling, extraction and concentration are combined into one step, and they can be directly injected into a gas chromatograph (GC) for analysis without further treatment. These samplers also address the additional needs of a passive sampling technique: they are economical, easy to deploy, and the TWA concentrations of target analytes can be obtained with one sampler. Moreover, the mass uptake of these samplers is independent of the face velocity, or the effect can be calibrated, which is desirable for long-term field sampling, especially when the convection conditions of the sampling environment are difficult to measure and calibrate. Among the three types of SPME samplers that were tested, the PDMS-membrane possesses the highest surface-to-volume ratio, which results in the highest sensitivity and mass uptake and the lowest detection level.

  18. Conditional Sampling of Ammonia at Livestock Operations Using Robotically Controlled Diffusive Samplers

    NASA Astrophysics Data System (ADS)

    Ham, J. M.; Williams, C.; Stratton, J. J.; Borch, T.

    2011-12-01

    Diffusive/passive samplers can be used to measure the spatial variations in ammonia and other trace gases near livestock operations, but results are often confounded by changing weather conditions during extended deployment periods (e.g., 1 to 2 weeks). A new type of conditional sampler was developed that only exposes the passive samplers when a user-defined set of wind and weather conditions are met. The samplers were housed in air-tight tubes that could be opened and closed with a motorized actuator controlled by datalogger. Samplers were deployed on portable tripods and linked via a wireless network. Multiple tripods, equipped with Radiello diffusive NH3 samplers, were deployed near cattle feedlots and dairies and programmed to only expose the passive samplers when the upwind source area represented a specific zone of the operation. A base-station with an anemometer, wind vane, thermometer, and humidity sensor controlled sampling at all tripods. This new methodology allows improved detection of spatial variation in emissions near livestock operations and provides more accurate measurements of downwind gradients. Data could be used in inverse models to approximate site specific emissions factors for ammonia.

  19. International Fall Festivals. Projects and Patterns for Holiday Gifts, Greetings, Ornaments, Decorations, and Classroom Displays. A Seasonal Idea/Activity Book for Grades 1-6.

    ERIC Educational Resources Information Center

    Barr, Marilynn G.

    This book provides a collection of patterns and activities based on the origins of customs and traditions practiced during the fall holidays in countries around the world. Students celebrate traditional and contemporary fall holidays by creating art projects and writing about the celebrations. The book features hands-on cut-and-paste activities…

  20. International Winter Festivals. Projects and Patterns for Holiday Gifts, Greetings, Ornaments, Decorations, and Classroom Displays. A Seasonal Idea/Activity Book for Grades 1-6.

    ERIC Educational Resources Information Center

    Barr, Marilynn G.

    This book provides a collection of patterns and activities based on the origins of customs and traditions practiced during the winter holiday seasons in countries around the world. Christmas is a Christian tradition, but it is recognized by many in the world as a time of joy, hope, peace on earth, and goodwill for all. This book examines how many…

  1. Ideas that Work for Outdoor Teachers and Leaders. Papers, Activities, and Resources from the National Outdoor Education Conference (Potosi, Missouri, October 9-13, 1985).

    ERIC Educational Resources Information Center

    Riley, Cheryl L., Comp.

    Emphasizing the ethics of conservation, this conference report compiles the following information submitted by conference presenters: (1) summaries of their presentations; (2) environmental ethics statements pertinent to their subjects; (3) activities; (4) favorite quotation; and (5) resources and references including books, journals,…

  2. High-School Students Believe School Physics Helps in Developing Logical but Not Creative Thinking: Active Learning Can Change This Idea

    ERIC Educational Resources Information Center

    Marušic, Mirko; Sliško, Josip

    2014-01-01

    This study is based on two exploratory questions with the aim of determining the relative effectiveness of two different student activities, called "Reading, Presenting and Questioning" (RPQ) and "Experimenting and Discussing" (ED), in changing students' perceptions and attitudes about the impact of physics learning on the…

  3. Combined scanning electron microscopy and image analysis to investigate airborne submicron particles: a comparison between personal samplers.

    PubMed

    Zamengo, L; Barbiero, N; Gregio, M; Orrù, G

    2009-07-01

    The main objectives of this study were: (i) to compare commonly used personal samplers and verify their collection efficiency with regards to submicron particles; (ii) to investigate how the submicron particles deposit onto the filter surface in order to assess the homogeneity of the deposition; (iii) to estimate the biases which could affect results when number concentration values have to be determined by particle counting. A method based on image analysis (IA) and scanning electron microscopy (SEM) is developed and adopted to investigate a large numbers of particles. Four different personal samplers were tested: the IOM sampler, the Button sampler and the German GSP for the inhalable aerosol fraction; the PEM sampler for the thoracic aerosol fraction. In order to investigate how particles distribute on the filters surface, the area of each filter was virtually divided into circular concentric areas or deposition zones (DZ). Results from different DZ of the same filter were compared. Uniformity of deposition was mostly observed for three of the four tested samplers. A significant radial distribution was observed only for the GSP sampler. The major homogeneity was found for the Button sampler. In order to estimate the relative collection efficiency between samplers, particles number concentrations determined by particle counting were compared. The GSP sampler provided the greatest concentrations but also the greatest variability. The PEM sampler provided the lowest concentrations. The homogeneity of particle deposition on the filter surface mostly affected results when counting is performed on localized areas of the filter.

  4. Engineering Task Plan for Preparing the Type 4 In Situ Vapor Samplers (ISVS) for Use

    SciTech Connect

    BOGER, R.M.

    2000-01-06

    The DOE has identified a need to sample vapor space and exhaust ducts of several waste tanks The In-Situ Vapor Sampling (ISVS) Type IV vapor sampling cart has been identified as the appropriate monitoring tool. The ISVS carts have been out of service for a number of years. This ETP outlines the work to be performed to ready the type IV gas sampler for operation Characterization Engineering will evaluate the Type IV gas sampler carts to determine their state of readiness and will proceed to update procedures and equipment documentation to make the sampler operationally acceptable.

  5. Airborne influenza virus detection with four aerosol samplers using molecular and infectivity assays: considerations for a new infectious virus aerosol sampler

    PubMed Central

    Fabian, P.; McDevitt, J. J.; Houseman, E. A.; Milton, D. K.

    2013-01-01

    As a first step in conducting studies of airborne influenza transmission, we compared the collection performance of an SKC Biosampler, a compact cascade impactor (CCI), Teflon filters, and gelatin filters by collecting aerosolized influenza virus in a one-pass aerosol chamber. Influenza virus infectivity was determined using a fluorescent focus assay and influenza virus nucleic acid (originating from viable and non-viable viruses) was measured using quantitative PCR. The results showed that the SKC Biosampler recovered and preserved influenza virus infectivity much better than the other samplers – the CCI, Teflon, and gelatin filters recovered only 7–22% of infectious viruses compared with the Biosampler. Total virus collection was not significantly different among the SKC Biosampler, the gelatin, and Teflon filters, but was significantly lower in the CCI. Results from this study show that a new sampler is needed for virus aerosol sampling, as commercially available samplers do not efficiently collect and conserve virus infectivity. Applications for a new sampler include studies of airborne disease transmission and bioterrorism monitoring. Design parameters for a new sampler include high collection efficiency for fine particles and liquid sampling media to preserve infectivity. PMID:19689447

  6. Ideas in Context and the Idea of Renaissance Philosophy.

    PubMed

    Celenza, Christopher S

    2014-10-01

    This contribution to the symposium marking the publication of the 100th volume in the series Ideas in Context (Cambridge University Press) assesses the significance of the series for work on Renaissance philosophy.

  7. Performance of personal inhalable aerosol samplers in very slowly moving air when facing the aerosol source.

    PubMed

    Witschger, O; Grinshpun, S A; Fauvel, S; Basso, G

    2004-06-01

    While personal aerosol samplers have been characterized primarily based on wind tunnel tests conducted at relatively high wind speeds, modern indoor occupational environments are usually represented by very slow moving air. Recent surveys suggest that elevated levels of occupational exposure to inhalable airborne particles are typically observed when the worker, operating in the vicinity of the dust source, faces the source. Thus, the first objective of this study was to design and test a new, low cost experimental protocol for measuring the sampling efficiency of personal inhalable aerosol samplers in the vicinity of the aerosol source when the samplers operate in very slowly moving air. In this system, an aerosol generator, which is located in the centre of a room-sized non-ventilated chamber, continuously rotates and omnidirectionally disperses test particles of a specific size. The test and reference samplers are equally distributed around the source at the same distance from the centre and operate in parallel (in most of our experiments, the total number of simultaneously operating samplers was 15). Radial aerosol transport is driven by turbulent diffusion and some natural convection. For each specific particle size and the sampler, the aerosol mass concentration is measured by weighing the collection filter. The second objective was to utilize the new protocol to evaluate three widely used aerosol samplers: the IOM Personal Inhalable Sampler, the Button Personal Inhalable Aerosol Sampler and the 25 mm Millipore filter holder (closed-face C25 cassette). The sampling efficiencies of each instrument were measured with six particle fractions, ranging from 6.9 to 76.9 micro m in their mass median aerodynamic diameter. The Button Sampler efficiency data demonstrated a good agreement with the standard inhalable convention and especially with the low air movement inhalabilty curve. The 25 mm filter holder was found to considerably under-sample the particles larger

  8. Acquisition Reform: Three Big Ideas

    DTIC Science & Technology

    2015-05-19

    Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std Z39-18 Three Acq Reform Big Ideas 5 /19/2015 2 (1) Competing Capability Needs Among Services...to sponsor and users • Not required to be an acquisition expert • Tenure not as important Summary: 3 Big Ideas 5 /19/2015 19 (1) Competing...Acquisition Reform Three Big Ideas The provocative views expressed here are not those of the Department of Defense, DAU, or perhaps even the

  9. High efficiency CIP 10-I personal inhalable aerosol sampler

    NASA Astrophysics Data System (ADS)

    Görner, P.; Wrobel, R.; Simon, X.

    2009-02-01

    The CIP 10 personal aerosol sampler was first developed by Courbon for sampling the respirable fraction of mining dust. This respirable aerosol sampler was further improved by Fabries, then selectors for sampling thoracic and inhalable aerosols were designed. Kenny et al. evaluated the particle-size dependent sampling efficiency of the inhalable version in a large-scale wind tunnel using a life-size dummy. The authors found that the overall sampling efficiency decreases more rapidly than the CEN-ISO-ACGIH target efficiency curve. Görner and Witschger measured the aspiration efficiency of the CIP 10 omni-directional inlet. They found that the aspiration efficiency was high enough for inhalable aerosol sampling. This result led to the conclusion that the low sampling efficiency is due to some internal losses of the aspirated particles before they reach the final sampling stage, namely the CIP 10 rotating filter. Based on the assumption that the inhalable particles are selected at selector aspiration level, an experimental research project was conducted to improve particle transmission to the collection stage of the sampler. Two different inhalable selectors were designed by Görner and tested in a laboratory wind tunnel. The transmission efficiency of both models was measured by Roger following an experimental protocol described by Witschger. The T-shaped air flow circuit was finally adopted to draw the aspirated particles into the final collection stage of the CIP 10. Actually, in this selector, the almost horizontally aspirated particles should be conducted vertically to the rotating cup. In two previous prototypes, particles could be deposited in certain places by inertia (where the aerosol was forced to deviate drastically) or by sedimentation (where the aerosol decelerated). The aerodynamic behaviour of the adopted solution causes the particles to accelerate radially between two horizontal plates before they enter a vertical tube. This acceleration avoids the

  10. Ideas about Acids and Alkalis.

    ERIC Educational Resources Information Center

    Toplis, Rob

    1998-01-01

    Investigates students' ideas, conceptions, and misconceptions about acids and alkalis before and after a teaching sequence in a small-scale research project. Concludes that student understanding of acids and alkalis is lacking. (DDR)

  11. Development of a personal bioaerosol sampler based on a conical cyclone with recirculating liquid film.

    PubMed

    Tolchinsky, Alexander D; Sigaev, Vladimir I; Sigaev, Genneday I; Varfolomeev, Alexander N; Zvyagina, Ekaterina V; Brasel, Trevor; Cheng, Yung Sung

    2010-03-01

    This article describes the development of a novel, high-performance personal aerosol sampler intended to monitor occupational air pollution, specifically, microbial constituents. This prototype sampler has a horizontally positioned conical cyclone with recirculating liquid film and an ejection supply of adsorptive liquid into the inlet nozzle. Airborne pollutants were collected in the adsorptive liquid, thus improving the survivability of microbiological aerosol samples. Experimental modules of different dimensions were first evaluated. Based on the test results, a prototype sampler was fabricated and tested. Evaluation of the collection efficiency of the prototype unit indicated a higher than 90% collection efficiency for particles > 1.0 microm. The 50% cutoff diameter was between 0.70-0.75 microm. For assessment of the sampling process effect on the collected microorganisms, Bacillus thuringiensis was tested at a concentration of about 1.0 x 10(6) cells per cm(3). The viability in the prototype sampler decreased to 78% after 60 min of operation.

  12. On the efficiency and correction of vertically oriented blunt bioaerosol samplers in moving air.

    PubMed

    Michel, Dominik; Rotach, Mathias W; Gehrig, Regula; Vogt, Roland

    2012-11-01

    The aspiration efficiency of vertical and wind-oriented Air-O-Cell samplers was investigated in a field study using the pollen of hazel, sweet chestnut and birch. Collected pollen numbers were compared to measurements of a Hirst-type Burkard spore trap. The discrepancy between pollen counts is substantial in the case of vertical orientation. The results indicate a strong influence of wind velocity and inlet orientation relative to the freestream on the aspiration efficiency. Various studies reported on inertial effects on aerosol motion as function of wind velocity. The measurements were compared to a physically based model for the limited case of vertical blunt samplers. Additionally, a simple linear model based on pollen counts and wind velocity was developed. Both correction models notably reduce the error of vertically oriented samplers, whereas only the physically based model can be used on independent datasets. The study also addressed the precision error of the instruments used, which was substantial for both sampler types.

  13. Selecting Performance Reference Compounds (PRCS)for Polyethylene Passive Samplers Deployed at Contaminated Sediment Sites

    EPA Science Inventory

    Use of equilibrium passive samplers for performing aquatic environmental monitoring at contaminated sediment sites, including Superfund sites, is becoming more common. However, a current challenge in passive sampling is determining when equilibrium is achieved between the sampl...

  14. Evaluating Cost when Selecting Performance Reference Compounds for the Environmental Deployment of Polyethylene Passive Samplers

    EPA Science Inventory

    A challenge in environmental passive sampling is determining when equilibrium is achieved between the sampler, target contaminants, and environmental phases. A common approach is the use of performance reference compounds (PRCs) to indicate degree of equilibrium. One logistical...

  15. 50 CFR 697.12 - At-sea sea sampler/observer coverage.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... may request any vessel issued a Federal limited access American lobster permit to carry a NMFS... issued a Federal limited access American lobster permit, if requested by the sea sampler/observer...

  16. 50 CFR 697.12 - At-sea sea sampler/observer coverage.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... may request any vessel issued a Federal limited access American lobster permit to carry a NMFS... issued a Federal limited access American lobster permit, if requested by the sea sampler/observer...

  17. 50 CFR 697.12 - At-sea sea sampler/observer coverage.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... may request any vessel issued a Federal limited access American lobster permit to carry a NMFS... issued a Federal limited access American lobster permit, if requested by the sea sampler/observer...

  18. 50 CFR 697.12 - At-sea sea sampler/observer coverage.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... may request any vessel issued a Federal limited access American lobster permit to carry a NMFS... issued a Federal limited access American lobster permit, if requested by the sea sampler/observer...

  19. 50 CFR 697.12 - At-sea sea sampler/observer coverage.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... may request any vessel issued a Federal limited access American lobster permit to carry a NMFS... issued a Federal limited access American lobster permit, if requested by the sea sampler/observer...

  20. On the efficiency and correction of vertically oriented blunt bioaerosol samplers in moving air

    NASA Astrophysics Data System (ADS)

    Michel, Dominik; Rotach, Mathias W.; Gehrig, Regula; Vogt, Roland

    2012-11-01

    The aspiration efficiency of vertical and wind-oriented Air-O-Cell samplers was investigated in a field study using the pollen of hazel, sweet chestnut and birch. Collected pollen numbers were compared to measurements of a Hirst-type Burkard spore trap. The discrepancy between pollen counts is substantial in the case of vertical orientation. The results indicate a strong influence of wind velocity and inlet orientation relative to the freestream on the aspiration efficiency. Various studies reported on inertial effects on aerosol motion as function of wind velocity. The measurements were compared to a physically based model for the limited case of vertical blunt samplers. Additionally, a simple linear model based on pollen counts and wind velocity was developed. Both correction models notably reduce the error of vertically oriented samplers, whereas only the physically based model can be used on independent datasets. The study also addressed the precision error of the instruments used, which was substantial for both sampler types.

  1. Measuring freely dissolved water concentrations of PCBs using LDPE passive samplers and performance reference compounds (PRCs)

    EPA Science Inventory

    Low-Density polyethylene (LDPE) sheets are often used as passive samplers for aquatic environmental monitoring to measure the dissolved concentrations of hydrophobic organic contaminants (HOCs). These concentrations are then used to evaluate the potential for ecological and human...

  2. Evaluating PCB Bioavailability Using Passive Samplers and Mussles at a Contaminated Sediment Site

    EPA Science Inventory

    Passive samplers, including semi-permeable membrane devices (SPMDs), solid phase microextraction (SPME) and polyethylene devices (PEDs), provide innovative tools for measuring hydrophobic organic contaminants (HOCs) originating from contaminated waters and sediments. Because the...

  3. A remotely operated serial sampler for collecting gas-tight fluid samples

    NASA Astrophysics Data System (ADS)

    Wu, Shi-jun; Yang, Can-jun; Ding, Kang; Tan, Chun-yang

    2015-10-01

    This paper describes the design, construction and preliminary test results for a gas-tight serial sampler intended to be deployed at seafloor for long-term operation to take time-series fluid samples from deep-sea environments such as cold seeps, water column and hydrothermal vents. The serial sampler is a modular system that is based on independent and identical sampling modules, which are designed to collect six 160 ml gas-tight fluid samples maintained at high pressure to a depth of 4000 meters. With two working modes, the sampler can be deployed either with seafloor cabled observatory for remote control or as a stand-alone device for autonomous operation. A prototype of the instrument has been constructed and tested on the MARS cabled observatory for two months. The laboratory and field tests proved the success of the design and construction of the serial sampler, and indicated the potential for future ocean sciences.

  4. Improved large-volume sampler for the collection of bacterial cells from aerosol.

    PubMed

    White, L A; Hadley, D J; Davids, D E; Naylor, R

    1975-03-01

    A modified large-volume sampler was demonstrated to be an efficient device for the collection of mono-disperse aerosols of rhodamine B and poly-disperse aerosols of bacterial cells. Absolute efficiency for collection of rhodamine B varied from 100% with 5-mum particles to about 70% with 0.5-mum particles. The sampler concentrated the particles from 950 liters of air into a flow of between 1 and 2 ml of collecting fluid per min. Spores of Bacillus subtilis var. niger were collected at an efficiency of about 82% compared to the collection in the standard AGI-30 sampler. In the most desirable collecting fluids tested, aerosolized cells of Serratia marcescens, Escherichia coli, and Aerobacter aerogenes were collected at comparative efficiencies of approximately 90, 80, and 90%, respectively. The modified sampler has practical application in the study of aerosol transmission of respiratory pathogens.

  5. A source of PCB contamination in modified high-volume air samplers

    SciTech Connect

    Basu, I.; O'Dell, J.M.; Arnold, K.; Hites, R.A.

    2000-02-01

    Modified Anderson High Volume (Hi-Vol) air samplers are widely used for the collection of semi-volatile organic compounds (such as PCBs) from air. The foam gasket near the main air flow path in these samplers can become contaminated with PCBs if the sampler or the gasket is stored at a location with high indoor air PCB levels. Once the gasket is contaminated, it releases PCBs back into the air stream during sampling, and as a result, incorrectly high air PCB concentrations are measured. This paper presents data demonstrating this contamination problem using measurements from two Integrated Atmospheric Deposition Network sites: one at Sleeping Bear Dunes on Lake Michigan and the other at Point Petre on Lake Ontario. The authors recommend that these gaskets be replaced by Teflon tape and that the storage history of each sampler be carefully tracked.

  6. [Assessment of measured respirable dust sampler penetration and the sampling convention for work environment measurement].

    PubMed

    Myojo, Toshihiko

    2005-11-01

    The relationship between dust size and penetration for a static horizontal elutriator (Sibata C-30) was measured in calm air. The elutriator as a low-volume air sampler is widely used as a dust size classifier in work environment measurements. The actual penetrations were compared with the theoretical models of the sampler and with sampling convention for respirable dust in work environment measurement. The sampling convention was recently introduced into the Japanese standard for work environment measurement and is based on the ISO 7708 respirable dust convention. The bias of sampled masses from the respirable dust was calculated for two flow rates of the sampler, i.e., 50% cut sizes of 4 microm and 5 microm, from measured penetration curves. The bias of the sampler was overestimated in the 5 microm, 50% cut condition and underestimated in the 4 microm, 50% cut condition for most workplace sampling situations.

  7. Estimation of Measurement Uncertainties for the DGT Passive Sampler Used for Determination of Copper in Water

    PubMed Central

    Rauch, Sebastien; Morrison, Gregory M.

    2014-01-01

    Diffusion-based passive samplers are increasingly used for water quality monitoring. While the overall method robustness and reproducibility for passive samplers in water are widely reported, there has been a lack of a detailed description of uncertainty sources. In this paper an uncertainty budget for the determination of fully labile Cu in water using a DGT passive sampler is presented. Uncertainty from the estimation of effective cross-sectional diffusion area and the instrumental determination of accumulated mass of analyte are the most significant sources of uncertainty, while uncertainties from contamination and the estimation of diffusion coefficient are negligible. The results presented highlight issues with passive samplers which are important to address if overall method uncertainty is to be reduced and effective strategies to reduce overall method uncertainty are presented. PMID:25258629

  8. 7 CFR 52.34 - How samples are drawn by inspectors or licensed samplers.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... samplers. 52.34 Section 52.34 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL MARKETING ACT OF 1946 PROCESSED FRUITS AND VEGETABLES, PROCESSED...

  9. Stata Hybrids: Updates and Ideas

    NASA Technical Reports Server (NTRS)

    Fieldler, James

    2014-01-01

    At last year's Stata conference I presented two projects for using Python with Stata: a plugin that embeds the Python programming language within Stata and code for using Stata data sets in Python. In this talk I will describe some small improvements being made to these projects, and I will present other ideas for combining tools with Stata. Some of these ideas use Python, some use JavaScript and a web browser.

  10. Design and validation of a high-flow personal sampler for PM2.5.

    PubMed

    Adams, H S; Kenny, L C; Nieuwenhuijsen, M J; Colvile, R N; Gussman, R A

    2001-01-01

    A high-flow personal sampler (HFPS) for airborne particulate matter has been developed and fully characterised, and validation tests have been carried out. The sampler is a low-cost gravimetric instrument designed to collect particulate matter with a 50% cut point at 2.5 microm aerodynamic equivalent diameter (PM2.5), where size selection is achieved by the use of porous polyurethane foam. Development of a porous foam selector was chosen over a cyclone or impactor due to the lightweight, low-cost, and compact design that could be achieved. The sampler flow rate of 16 1/min is achieved using a portable, flow-controlled pump; this flow rate is far higher than that of conventional personal samplers and the HFPS can therefore be used for personal sampling in the ambient environment over short sampling periods of much less than 24 h. The HFPS is currently being used in a study of particle exposure of urban transport users (cyclists, car drivers, bus and Underground rail passengers) where personal sampling over short time periods representing typical commuter journey times is required. The HFPS was fully characterised in chamber studies with a TSI aerodynamic particle sizer (APS). The sampler was then validated against a co-located U.S. EPA Federal Reference PM2.5 Well Impactor Ninety Six (WINS) and a KTL cyclone, and parallel testing was performed. Initial testing showed some penetration of particles through the porous foam structure; applying an oil coating to the foam eliminated this problem. Chamber testing was carried out on a number of different selector prototypes, with the final design giving a 50% penetration diameter (i.e., d50) of 2.4 microm at 16 1/min. The new sampler exhibited good agreement in three sets of co-located tests with established samplers, and parallel testing showed excellent agreement between paired HFPS samplers.

  11. Computational fluid dynamics (CFD) simulation of a newly designed passive particle sampler.

    PubMed

    Sajjadi, H; Tavakoli, B; Ahmadi, G; Dhaniyala, S; Harner, T; Holsen, T M

    2016-07-01

    In this work a series of computational fluid dynamics (CFD) simulations were performed to predict the deposition of particles on a newly designed passive dry deposition (Pas-DD) sampler. The sampler uses a parallel plate design and a conventional polyurethane foam (PUF) disk as the deposition surface. The deposition of particles with sizes between 0.5 and 10 μm was investigated for two different geometries of the Pas-DD sampler for different wind speeds and various angles of attack. To evaluate the mean flow field, the k-ɛ turbulence model was used and turbulent fluctuating velocities were generated using the discrete random walk (DRW) model. The CFD software ANSYS-FLUENT was used for performing the numerical simulations. It was found that the deposition velocity increased with particle size or wind speed. The modeled deposition velocities were in general agreement with the experimental measurements and they increased when flow entered the sampler with a non-zero angle of attack. The particle-size dependent deposition velocity was also dependent on the geometry of the leading edge of the sampler; deposition velocities were more dependent on particle size and wind speeds for the sampler without the bend in the leading edge of the deposition plate, compared to a flat plate design. Foam roughness was also found to have a small impact on particle deposition.

  12. Use of Passive Diffusion Samplers for Monitoring Volatile Organic Compounds in Ground Water

    USGS Publications Warehouse

    Harte, Philip T.; Brayton, Michael J.; Ives, Wayne

    2000-01-01

    Passive diffusion samplers have been tested at a number of sites where volatile organic compounds (VOC's) are the principal contaminants in ground water. Test results generally show good agreement between concentrations of VOC's in samples collected with diffusion samplers and concentrations in samples collected by purging the water from a well. Diffusion samplers offer several advantages over conventional and low-flow ground-water sampling procedures: * Elimination of the need to purge a well before collecting a sample and to dispose of contaminated water. * Elimination of cross-contamination of samples associated with sampling with non-dedicated pumps or sample delivery tubes. * Reduction in sampling time by as much as 80 percent of that required for 'purge type' sampling methods. * An increase in the frequency and spatial coverage of monitoring at a site because of the associated savings in time and money. The successful use of diffusion samplers depends on the following three primary factors: (1) understanding site conditions and contaminants of interest (defining sample objectives), (2) validating of results of diffusion samplers against more widely acknowledged sampling methods, and (3) applying diffusion samplers in the field.

  13. Performance characterization of the MiniVol PM{sub 2.5} sampler

    SciTech Connect

    Hill, J.S.; Patel, P.D.; Turner, J.R.

    1999-07-01

    Measurements were conducted to assess the MiniVol PM{sub 2.5} sampler performance for various particle preseparator configurations including flat and cup impaction stages. Laboratory measurements were conducted to determine the impactor collection efficiency as a function of particle size. Impactor cut points--the aerodynamic particle diameter exhibiting 50% collection efficiency--were 2.5 mm ({approximately} 10%) for the flat stage and 3.0 mm for the cup stage. Collection efficiency curves for cascade (tandem) impactor configurations (PM{sub 10} followed by PM{sub 2.5}) generally agreed with the single stage results. In all cases the collection efficiency curves exhibited the classical sigmoidal shape, albeit less steep than required for PM{sub 2.5} Federal Reference Method (FRM) samplers. Field data were collected at urban sites in St. Louis using MiniVol samplers collocated with a PM{sub 2.5} FRM sampler to quantify the MiniVol sampler precision and accuracy. Collocated sampler precision was 6% and 10% for MiniVol cascade impactors with flat PM{sub 2.5} stages and cup PM{sub 2.5} stages, respectively (N = 31). Both of these MiniVol configurations were deemed statistically equivalent to the FRM when the reported ambient mass concentrations were corrected for field blank values (N = 15).

  14. Performance study of personal inhalable aerosol samplers at ultra-low wind speeds.

    PubMed

    Sleeth, Darrah K; Vincent, James H

    2012-03-01

    The assessment of personal inhalable aerosol samplers in a controlled laboratory setting has not previously been carried out at the ultra-low wind speed conditions that represent most modern workplaces. There is currently some concern about whether the existing inhalable aerosol convention is appropriate at these low wind speeds and an alternative has been suggested. It was therefore important to assess the performance of the most common personal samplers used to collect the inhalable aerosol fraction, especially those that were designed to match the original curve. The experimental set-up involved use of a hybrid ultra-low speed wind tunnel/calm air chamber and a rotating, heating breathing mannequin to measure the inhalable fraction of aerosol exposure. The samplers that were tested included the Institute of Occupational Medicine (IOM), Button, and GSP inhalable samplers as well as the closed-face cassette sampler that has been (and still is) widely used by occupational hygienists in many countries. The results showed that, down to ∼0.2 m s(-1), the samplers matched the current inhalability criterion relatively well but were significantly greater than this at the lowest wind speed tested. Overall, there was a significant effect of wind speed on sampling efficiency, with lower wind speeds clearly associated with an increase in sampling efficiency.

  15. The suitability of the IOM foam sampler for bioaerosol sampling in Occupational Environments.

    PubMed

    Haatainen, Susanna; Laitinen, Juha; Linnainmaa, Markku; Reponen, Tiina; Kalliokoski, Pentti

    2010-01-01

    Concurrent samples were collected with Andersen and IOM foam samplers to determine whether if the IOM foam sampler can be applied to collect culturable microorganisms. Two different kinds of aerosols were studied: peat dust in a power plant and mist from coolant fluid aerosolized during grinding of blades and rollers in a paper mill. In the power plant, the concentrations of fungi were 2-3 times higher in the IOM samples than in the Andersen samples. However, more fungal genera were identified in the latter case. The methods yielded similar concentrations of bacteria and actinobacteria in the power plant. On the other hand, the performance of the IOM foam sampler was very poor in the paper mill, where stress-sensitive gram-negative bacteria dominated; low concentration of bacteria was detected in only one IOM sample even though the concentration of bacteria often exceeded even the upper detection limit in the Andersen impactor samples. It could be concluded that the IOM foam sampler performs quite well for collecting inhalable fungi and actinobacteria. However, the Andersen sampler provides better information on fungal genera and concentrations of gram-negative bacteria. Personal sampling with the IOM foam sampler provided an important benefit in the power plant, where the concentration ratio of personal to stationary samples was much higher for bacteria than for inhalable or respirable dust.

  16. Numerical evaluation of lateral diffusion inside diffusive gradients in thin films samplers.

    PubMed

    Santner, Jakob; Kreuzeder, Andreas; Schnepf, Andrea; Wenzel, Walter W

    2015-05-19

    Using numerical simulation of diffusion inside diffusive gradients in thin films (DGT) samplers, we show that the effect of lateral diffusion inside the sampler on the solute flux into the sampler is a nonlinear function of the diffusion layer thickness and the physical sampling window size. In contrast, earlier work concluded that this effect was constant irrespective of parameters of the sampler geometry. The flux increase caused by lateral diffusion inside the sampler was determined to be ∼8.8% for standard samplers, which is considerably lower than the previous estimate of ∼20%. Lateral diffusion is also propagated to the diffusive boundary layer (DBL), where it leads to a slightly stronger decrease in the mass uptake than suggested by the common 1D diffusion model that is applied for evaluating DGT results. We introduce a simple correction procedure for lateral diffusion and demonstrate how the effect of lateral diffusion on diffusion in the DBL can be accounted for. These corrections often result in better estimates of the DBL thickness (δ) and the DGT-measured concentration than earlier approaches and will contribute to more accurate concentration measurements in solute monitoring in waters.

  17. Numerical Evaluation of Lateral Diffusion Inside Diffusive Gradients in Thin Films Samplers

    PubMed Central

    2015-01-01

    Using numerical simulation of diffusion inside diffusive gradients in thin films (DGT) samplers, we show that the effect of lateral diffusion inside the sampler on the solute flux into the sampler is a nonlinear function of the diffusion layer thickness and the physical sampling window size. In contrast, earlier work concluded that this effect was constant irrespective of parameters of the sampler geometry. The flux increase caused by lateral diffusion inside the sampler was determined to be ∼8.8% for standard samplers, which is considerably lower than the previous estimate of ∼20%. Lateral diffusion is also propagated to the diffusive boundary layer (DBL), where it leads to a slightly stronger decrease in the mass uptake than suggested by the common 1D diffusion model that is applied for evaluating DGT results. We introduce a simple correction procedure for lateral diffusion and demonstrate how the effect of lateral diffusion on diffusion in the DBL can be accounted for. These corrections often result in better estimates of the DBL thickness (δ) and the DGT-measured concentration than earlier approaches and will contribute to more accurate concentration measurements in solute monitoring in waters. PMID:25877251

  18. Career Education and English, K-12: Ideas for Teaching.

    ERIC Educational Resources Information Center

    Kilby, Jan E., Ed.; Suhor, Charles, Ed.

    This practical guide has been created for elementary and secondary school English teachers who wish to incorporate career education in their classroom activities. The guide has two sections, one on teaching ideas and one on resources. The teaching ideas are divided into discussions of career awareness during kindergarten through grade six, career…

  19. Operations of the Automated Radioxenon Sampler/Analyzer - ARSA

    SciTech Connect

    Hayes, James C.; Abel, Keith H.; Bowyer, Ted W.; Heimbigner, Tom R.; Panisko, Mark E.; Reeder, Paul L.; McIntyre, Justin I.; Thompson, Robert C.; Todd, Lindsay C.; Warner, Ray A.

    1999-09-01

    The Automated Radioxenon Sampler/ Analyzer (ARSA), designed and built by Pacific Northwest National Laboratory (PNNL), for the Department of Energy, has exceeded measurement requirements for noble gas measurement systems established by the Comprehensive Nuclear-Test-Ban Treaty. Two units, one at PNNL and a second, sent to DME Corp. of Florida, were built and extensively tested. Both systems have successfully demonstrated stable xenon yields greater than 1.5 cm3 for an eight-hour collection period, corresponding to minimum detectable concentrations for 133Xe on the order of 0.1 mBq/m3 three times per day. High stable xenon yields are critical in obtaining these low minimum detectable concentrations. A history of testing and results that led to the high xenon yields of the ARSA system is presented. A compilation of field tests, laboratory tests and baseline tests that led to cost reduction, power savings and size reduction of the ARSA are also discussed. Lastly, the type of data generated from the ARSA of interest to data center personnel are discussed.

  20. Radiation dependence of inverter propagation delay from timing sampler measurements

    NASA Technical Reports Server (NTRS)

    Buehler, M. G.; Blaes, B. R.; Lin, Y.-S.

    1989-01-01

    A timing sampler consisting of 14 four-stage inverter-pair chains with different load capacitances was fabricated in 1.6-micron n-well CMOS and irradiated with cobalt-60 at 10 rad(Si)/s. For this CMOS process the measured results indicate that the rising delay increases by about 2.2 ns/Mrad(Si) and the falling delay increase is very small, i.e., less than 300 ps/Mrad(Si). The amount of radiation-induced delay depends on the size of the load capacitance. The maximum value observed for this effect was 5.65 ns/pF-Mrad(Si). Using a sensitivity analysis, the sensitivity of the rising delay to radiation can be explained by a simple timing model and the radiation sensitivity of dc MOSFET parameters. This same approach could not explain the insensitivity of the falling delay to radiation. This may be due to a failure of the timing model and/or trapping effects.