Science.gov

Sample records for actual field application

  1. Preliminary Study on the Radar Vegetation Index (RVI) Application to Actual Paddy Fields by ALOS/PALSAR Full-polarimetry SAR Data

    NASA Astrophysics Data System (ADS)

    Yamada, Y.

    2015-04-01

    Kim and van Zyl (2001) proposed a kind of radar vegetation index (RVI). RVI = 4*min(λ1, λ2, λ3) / (λ1 + λ2 + λ3) They modified the equation as follows. (2009) RVI = 8 * σ0hv / (σ0hh + σ0vv +σ0hv ) by L-band full-polarimetric SAR data. They applied it into rice crop and soybean. (Y.Kim, T.Jackson et al., 2012) They compared RVI for L-, C- and X-bands to crop growth data, LAI and NDVI. They found L-band RVI was well correlated with Vegetation Water Content, LAI and NDVI. But the field data were collected by the multifrequency polarimetric scatterometer. The platform height was 4.16 meters from the ground. The author tried to apply the method to actual paddy fields near Tsukuba science city in Japan using ALOS/PALSAR, full-polarimetry L-band SAR data. The staple crop in Eastern Asia is rice and paddy fields are dominant land use. A rice-planting machine comes into wide use in this areas. The young rice plants were bedded regularly ridged line in the paddy fields by the machine. The space between two ridges of rice plants is about 30 cm and the wave length of PALSAR sensor is about 23 cm. Hence the Bragg scattering will appear depending upon the direction of the ridges of paddy fields. Once the Bragg scattering occurs, the backscattering values from the pixels should be very high comparing the surrounding region. Therefore the radar vegetation index (RVI) would be saturated. The RVI did not follow the increasing of vegetation anymore. Japan has launched ALOS-2 satellite and it has PALSAR-2, L-band SAR. Therefore RVI application product by PALSAR-2 will be watched with deep interest.

  2. Photovoltaic performance models: an evaluation with actual field data

    NASA Astrophysics Data System (ADS)

    TamizhMani, Govindasamy; Ishioye, John-Paul; Voropayev, Arseniy; Kang, Yi

    2008-08-01

    Prediction of energy production is crucial to the design and installation of the building integrated photovoltaic systems. This prediction should be attainable based on the commonly available parameters such as system size, orientation and tilt angle. Several commercially available as well as free downloadable software tools exist to predict energy production. Six software models have been evaluated in this study and they are: PV Watts, PVsyst, MAUI, Clean Power Estimator, Solar Advisor Model (SAM) and RETScreen. This evaluation has been done by comparing the monthly, seasonaly and annually predicted data with the actual, field data obtained over a year period on a large number of residential PV systems ranging between 2 and 3 kWdc. All the systems are located in Arizona, within the Phoenix metropolitan area which lies at latitude 33° North, and longitude 112 West, and are all connected to the electrical grid.

  3. Characterization of personal RF electromagnetic field exposure and actual absorption for the general public.

    PubMed

    Joseph, W; Vermeeren, G; Verloock, L; Heredia, Mauricio Masache; Martens, Luc

    2008-09-01

    In this paper, personal electromagnetic field exposure of the general public due to 12 different radiofrequency sources is characterized. Twenty-eight different realistic exposure scenarios based upon time, environment, activity, and location have been defined and a relevant number of measurements were performed with a personal exposure meter. Indoor exposure in office environments can be higher than outdoor exposure: 95th percentiles of field values due to WiFi ranged from 0.36 to 0.58 V m(-1), and for DECT values of 0.33 V m(-1) were measured. The downlink signals of GSM and DCS caused the highest outdoor exposures up to 0.52 V m(-1). The highest total field exposure occurred for mobile scenarios (inside a train or bus) from uplink signals of GSM and DCS (e.g., mobile phones) due to changing environmental conditions, handovers, and higher required transmitted signals from mobile phones due to penetration through windows while moving. A method to relate the exposure to the actual whole-body absorption in the human body is proposed. An application is shown where the actual absorption in a human body model due to a GSM downlink signal is determined. Fiftieth, 95th, and 99 th percentiles of the whole-body specific absorption rate (SAR) due to this GSM signal of 0.58 microW kg(-1), 2.08 microW kg(-1), and 5.01 microW kg(-1) are obtained for a 95th percentile of 0.26 V m(-1). A practical usable function is proposed for the relation between the whole-body SAR and the electric fields. The methodology of this paper enables epidemiological studies to make an analysis in combination with both electric field and actual whole-body SAR values and to compare exposure with basic restrictions. PMID:18695413

  4. Actual and 'optimum' flight speeds: field data reassessed

    PubMed

    Pennycuick

    1997-01-01

    Previously published field observations of the air speeds of 36 species of birds, all observed by the same method (ornithodolite), were compared with estimates of the corresponding minimum power speeds, calculated with a default body drag coefficient of 0.1. This value, which was derived from recent wind tunnel studies, represents a downward revision from default values previously used and leads, in turn, to an upward revision of estimated minimum power speeds. The mean observed air speeds are now distributed around the minimum power speed, rather than in between the speeds for minimum power and maximum range, as they were before. Although the field data do not represent migration, examination of the marginal effects of small changes of speed, on power and lift:drag ratio, indicates that flying at the maximum range speed on migration may not represent an 'optimal' or even a practical strategy and that cruising speeds may be limited by the muscle power available or by aerobic capacity. Caution in constructing 'optimisation' theories is indicated.

  5. 27 CFR 19.35 - Application of effective tax rate (Actual).

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... tax rate (Actual). 19.35 Section 19.35 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX... Rates § 19.35 Application of effective tax rate (Actual). Any proprietor who does not apply effective... tax rate for each batch of distilled spirits in the processing account on which credit against tax...

  6. Comprehensive Evaluation of Attitude and Orbit Estimation Using Actual Earth Magnetic Field Data

    NASA Technical Reports Server (NTRS)

    Deutschmann, Julie K.; Bar-Itzhack, Itzhack Y.

    2000-01-01

    A single, augmented Extended Kalman Filter (EKF), which simultaneously and autonomously estimates spacecraft attitude and orbit has been developed and successfully tested with real magnetometer and gyro data only. Because the earth magnetic field is a function of time and position, and because time is known quite precisely, the differences between the computed and measured magnetic field components, as measured by the magnetometers throughout the entire spacecraft orbit, are a function of both orbit and attitude errors. Thus, conceivably these differences could be used to estimate both orbit and attitude; an observability study validated this assumption. The results of testing the EKF with actual magnetometer and gyro data, from four satellites supported by the NASA Goddard Space Flight Center (GSFC) Guidance, Navigation, and Control Center, are presented and evaluated. They confirm the assumption that a single EKF can estimate both attitude and orbit when using gyros and magnetometers only.

  7. PREFACE: XVII International Youth Scientific School on Actual Problems of Magnetic Resonance and its Applications

    NASA Astrophysics Data System (ADS)

    2014-11-01

    Editors: M.S.Tagirov, V.V.Semashko, A.S.Nizamutdinov Kazan is the motherland of Electronic Paramagnetic Resonance (EPR) which was discovered in Kazan State University in 1944 by prof. E.K.Zavojskii. Since the Young Scientist School of Magnetic Resonance run by professor G.V.Skrotskii from MIPT stopped its work, Kazan took up the activity under the initiative of academician A.S.Borovik-Romanov. Nowadays this school is rejuvenated and the International Youth Scientific School studying "Actual problems of the magnetic resonance and its application" is developing. Traditionally the main subjects of the School meetings are: Magnetic Resonance in Solids, Chemistry, Geology, Biology and Medicine. The unchallenged organizers of that school are Kazan Federal University and Kazan E. K. Zavoisky Physical-Technical Institute. The rector of the School is professor Murat Tagirov, vice-rector - professor Valentine Zhikharev. Since 1997 more than 100 famous scientists from Germany, France, Switzerland, USA, Japan, Russia, Ukraine, Moldavia, Georgia provided plenary lecture presentations. Almost 700 young scientists have had an opportunity to participate in discussions of the latest scientific developments, to make their oral reports and to improve their knowledge and skills. To enhance competition among the young scientists, reports take place every year and the Program Committee members name the best reports, the authors of which are invited to prepare full-scale scientific papers. Since 2013 the International Youth Scientific School "Actual problems of the magnetic resonance and its application", following the tendency for comprehensive studies of matter properties and its interaction with electromagnetic fields, expanded "the field of interest" and opened the new section: Coherent Optics and Optical Spectroscopy. Many young people have submitted interesting reports on photonics, quantum electronics, laser physics, quantum optics, traditional optical and laser spectroscopy, non

  8. Evaluation of TENORMs field measurement with actual activity concentration in contaminated soil matrices.

    PubMed

    Saint-Fort, Roger; Alboiu, Mirtyll; Hettiaratchi, Patrick

    2007-09-01

    The occurrence of technologically enhanced naturally occurring radioactive materials (TENORMs) concentrated through anthropogenic processes in contaminated soils at oil and gas facilities represent one of the most challenging issues facing the Canadian and US oil and gas industry today. Natural occurring radioactivity materials (NORMs) field survey techniques are widely used as a rapid and cost-effective method for ascertaining NORMs risks associated with contaminated soils and waste matrices as well other components comprising the environment. Because of potentially significant liability issues with Norms if not properly managed, the development of quantitative relationships between TENORMs field measurement techniques and laboratory analysis present a practical approach in facilitating the interim safe decision process since laboratory results can take days. The primary objective of this study was to evaluate the relationships between direct measurements of field radioactivity and various laboratory batch techniques using data collection technologies for NORM and actual laboratory radioactivity concentrations. The significance of selected soil characteristics that may improve or confound these relationships in the formulation of empirical models was also achieved as an objective. The soil samples used in this study were collected from 4 different locations in western Canada and represented a wide range in terms of their selected chemical and physical properties. Multiple regression analyses for both field and batch data showed a high level of correlation between radionuclides Ra-226 and Ra-228 as a function of data collection technologies and relevant soil parameters. All R2 values for the empirical models were greater than 0.80 and significant at P<0.05. The creation of these empirical models could be valuable in improving predictability of radium contamination in soils and therefore, reduce analytical costs as well as environmental liabilities.

  9. Cadmium and zinc interactions and their transfer in soil-crop system under actual field conditions.

    PubMed

    Nan, Zhongren; Li, Jijun; Zhang, Jianming; Cheng, Guodong

    2002-02-21

    The transfer of Cd and Zn from calcareous soils nearby a non-ferrous mining and smelting bases to the spring wheat (Triticum aestivum L.) and corn (Zea mays L.) tissues and the interactions between the two metals concerned were investigated under actual field conditions. Samples of soils and entire crops were randomly collected during harvest time in 1998 in the Baiyin region. The soil metal contents showed that the furrows had been polluted (mean values: 3.16 mg kg(-1) for Cd; 146.78 mg kg(-1) for Zn) and the significant spatial variation of the soil contamination existed here (ranges, Cd: 0.14-19.3 mg kg(-1); Zn: 43.5-565.0 mg kg(-1)). The translocation ratios of the two metals from soil to crop parts in the region studied were relatively lower and the order of the element transfer in different plant tissues was root > stem > grain. The transfer ratio of element Cd was lower than that of element Zn. Cd and Zn uptake by the crop structures could be best described by four models (P < 0.01): linear; exponential; quadratic; and cubic. Apart from a linear relationship between the element Cd in the corn grains and soils, models were generally non-lincar. An analysis of Cd-Zn interaction mechanism led to the conclusion that the effects of the two metals were synergistic to each other under field conditions, in which increasing Cd and Zn contents in soils could increase the accumulations of Zn or Cd in the two crops.

  10. PREFACE: XVI International Youth Scientific School 'Actual Problems of Magnetic Resonance and its Applications'

    NASA Astrophysics Data System (ADS)

    Salakhov, M. Kh; Tagirov, M. S.; Dooglav, A. V.

    2013-12-01

    In 1997, A S Borovik-Romanov, the Academician of RAS, and A V Aganov, the head of the Physics Department of Kazan State University, suggested that the 'School of Magnetic Resonance', well known in the Soviet Union, should recommence and be regularly held in Kazan. This school was created in 1968 by G V Scrotskii, the prominent scientist in the field of magnetic resonance and the editor of many famous books on magnetic resonance (authored by A Abragam, B. Bleaney, C. Slichter, and many others) translated and edited in the Soviet Union. In 1991 the last, the 12th School, was held under the supervision of G V Scrotskii. Since 1997, more than 600 young scientists, 'schoolboys', have taken part in the School meetings, made their oral reports and participated in heated discussions. Every year a competition among the young scientist takes place and the Program Committee members name the best reports, the authors of which are invited to prepare full-scale scientific papers. The XVI International Youth Scientific School 'Actual problems of the magnetic resonance and its application' in its themes is slightly different from previous ones. A new section has been opened this year: Coherent Optics and Optical Spectroscopy. Many young people have submitted interesting reports on optical research, many of the reports are devoted to the implementation of nanotechnology in optical studies. The XVI International Youth Scientific School has been supported by the Program of development of Kazan Federal University. It is a pleasure to thank the sponsors (BRUKER Ltd, Moscow, the Russian Academy of Science, the Dynasty foundation of Dmitrii Zimin, Russia, Russian Foundation for Basic Research) and all the participants and contributors for making the International School meeting possible and interesting. A V Dooglav, M Kh Salakhov and M S Tagirov The Editors

  11. Applicability of an electrochemical Fenton-type process to actual wastewater treatment.

    PubMed

    Kishimoto, Naoyuki; Kitamura, Takuya; Nakamura, Yu

    2015-01-01

    The applicability of an electrochemical Fenton-type process (EF-HOCl-ReFe) to the treatment of three actual wastewaters, namely wastewater from an automobile factory (automobile wastewater), metal scrap-cleansing wastewater, and municipal wastewater, is discussed in this research. The EF-HOCl-ReFe successfully removed the chemical oxygen demand (COD) from automobile wastewater pre-treated by a coagulation process without any inhibition. The apparent current efficiency reached 86%, 46% of which was ascribed to the electrochemical Fenton-type mechanism. The metal scrap-cleansing wastewater had a yellow colour and high concentrations of COD (6550 mg/L) and Cl(-) (1560 mM). The EF-HOCl-ReFe could achieve almost complete COD removal and decolourization after 48 h of treatment, although a temporary intensification of colour was observed before the decolourization. The EF-HOCl-ReFe was also effective in the removal of 1,4-dioxane from municipal wastewater pre-treated by activated sludge and coagulation processes, which were unable to remove 1,4-dioxane. The 1,4-dioxane removal efficiency after 30 min of treatment reached 68.5%. Thus, the EF-HOCl-ReFe was applicable to the treatment of these actual wastewaters.

  12. Assessment of actual transpiration rate in olive tree field combining sap-flow, leaf area index and scintillometer measurements

    NASA Astrophysics Data System (ADS)

    Agnese, C.; Cammalleri, C.; Ciraolo, G.; Minacapilli, M.; Provenzano, G.; Rallo, G.; de Bruin, H. A. R.

    2009-09-01

    Models to estimate the actual evapotranspiration (ET) in sparse vegetation area can be fundamental for agricultural water managements, especially when water availability is a limiting factor. Models validation must be carried out by considering in situ measurements referred to the field scale, which is the relevant scale of the modelled variables. Moreover, a particular relevance assumes to consider separately the components of plant transpiration (T) and soil evaporation (E), because only the first is actually related to the crop stress conditions. Objective of the paper was to assess a procedure aimed to estimate olive trees actual transpiration by combining sap flow measurements with the scintillometer technique at field scale. The study area, located in Western Sicily (Italy), is mainly cultivated with olive crop and is characterized by typical Mediterranean semi-arid climate. Measurements of sap flow and crop actual evapotranspiration rate were carried out during 2008 irrigation season. Crop transpiration fluxes, measured on some plants by means of sap flow sensors, were upscaled considering the leaf area index (LAI). The comparison between evapotranspiration values, derived by displaced-beam small-aperture scintillometer (DBSAS-SLS20, Scintec AG), with the transpiration fluxes obtained by the sap flow sensors, also allowed to evaluate the contribute of soil evaporation in an area characterized by low vegetation coverage.

  13. Involved field radiation for Hodgkin's lymphoma: The actual dose to breasts in close proximity

    SciTech Connect

    Dabaja, Bouthaina; Wang Zhonglo; Stovall, Marilyn; Baker, Jamie S.; Smith, Susan A.; Khan, Meena; Ballas, Leslie; Salehpour, Mohammad R.

    2012-01-01

    To decrease the risk of late toxicities in Hodgkin's lymphoma (HL) patients treated with radiation therapy (RT) (HL), involved field radiation therapy (IFRT) has largely replaced the extended fields. To determine the out-of-field dose delivered from a typical IFRT to surrounding critical structures, we measured the dose at various points in an anthropomorphic phantom. The phantom is divided into 1-inch-thick slices with the ability to insert TLDs at 3-cm intervals grid spacing. Two treatment fields were designed, and a total of 45 TLDs were placed (equally spaced) at the margin of the each of the 2 radiation fields. After performing a computed tomography simulation, 2 treatment plans targeting the mediastinum, a typical treatment field in patients with early stage HL, were generated. A total dose of 3060 cGy was delivered to the gross tumor volume for each field consecutively. The highest measured dose detected at 1 cm from the field edge in the planning target volume was 496 cGy, equivalent to 16% of the isocentric dose. The dose dropped significantly with increasing distance from the field edge. It ranged from 1.1-3.9% of the isocentric dose at a distance of 3.2-4 cm to <1.6% at a distance of >6 cm. Although the computer treatment planning system (CTPS) frequently underestimated the dose delivered, the difference in dose between measured and generated by CTPS was <2.5% in 90 positions measured. The collateral dose of radiation to breasts from IFRT is minimal. The out-of-field dose, although mildly underestimated by CTPS, becomes insignificant at >3 cm from the field edge of the radiation field.

  14. Rheological investigation of body cream and body lotion in actual application conditions

    NASA Astrophysics Data System (ADS)

    Kwak, Min-Sun; Ahn, Hye-Jin; Song, Ki-Won

    2015-08-01

    The objective of the present study is to systematically evaluate and compare the rheological behaviors of body cream and body lotion in actual usage situations. Using a strain-controlled rheometer, the steady shear flow properties of commercially available body cream and body lotion were measured over a wide range of shear rates, and the linear viscoelastic properties of these two materials in small amplitude oscillatory shear flow fields were measured over a broad range of angular frequencies. The temperature dependency of the linear viscoelastic behaviors was additionally investigated over a temperature range most relevant to usual human life. The main findings obtained from this study are summarized as follows: (1) Body cream and body lotion exhibit a finite magnitude of yield stress. This feature is directly related to the primary (initial) skin feel that consumers usually experience during actual usage. (2) Body cream and body lotion exhibit a pronounced shear-thinning behavior. This feature is closely connected with the spreadability when cosmetics are applied onto the human skin. (3) The linear viscoelastic behaviors of body cream and body lotion are dominated by an elastic nature. These solid-like properties become a criterion to assess the selfstorage stability of cosmetic products. (4) A modified form of the Cox-Merz rule provides a good ability to predict the relationship between steady shear flow and dynamic viscoelastic properties for body cream and body lotion. (5) The storage modulus and loss modulus of body cream show a qualitatively similar tendency to gradually decrease with an increase in temperature. In the case of body lotion, with an increase in temperature, the storage modulus is progressively decreased while the loss modulus is slightly increased and then decreased. This information gives us a criterion to judge how the characteristics of cosmetic products are changed by the usual human environments.

  15. Making the Difference for Teachers: The Field Experience in Actual Practice.

    ERIC Educational Resources Information Center

    Slick, Gloria Appelt, Ed.

    This is the third in a series of four books presenting a variety of field experience program models and philosophies that drive the programs provided to preservice teachers during their undergraduate teacher preparation. This publication explores the internal workings of the relationships and events that have an impact on all the persons involved…

  16. Numerical reconstruction of part of an actual blast-wave flow field to agree with available experimental data

    NASA Astrophysics Data System (ADS)

    Lau, S. C. M.; Gottlieb, J. J.

    1983-11-01

    A method of solution is presented and validated for the numerical reconstruction of a certain part of an actual blast-wave flow field of interest for planar, cylindrical and spherical explosions, away from the explosion source where the blast-wave has become sufficiently weak that real-gas effects are unimportant. This method involves, essentially, a trial-and-error process of constructing the best possible path of a fluid particle or equivalent piston at the upstream side of the flow field of interest such that the resulting flow field constructed numerically in front of the equivalent moving piston agrees as well as possible with all available although limited experimental data. The relatively new random-choice method was suitably modified to easily handle the numerical computations of the nonstationary flow in front of the moving piston. Finally, the present method is used to reconstruct the flow field for past TNT and ANFO explosions, for which the blast-wave amplitudes are less than about 1 MPa. These results are presented in convenient graphical and tabular form, scaled for the case of a 1-kg TNT surface explosion or its equivalent in a standard atmosphere, so that they can be utilized readily for different sized explosions at the same or other atmospheric conditions.

  17. Intended release and actual retention of alfalfa leafcutting bees (Hymenoptera: Megachilidae) for pollination in commercial alfalfa seed fields.

    PubMed

    Pitts-Singer, Theresa L

    2013-04-01

    Low, medium, and high stocking densities (15,000; 30,000; and 45,000-50,000 bees per acre, respectively) of Megachile rotundata (F.) (Hymenoptera: Megachilidae), the alfalfa leafcutting bee, were released over 4 yr in three research plots of Utah alfalfa, Medicago sativa L. (Fabaceae), planted at seed-production rates. A low percentage of bees (46-79% of released) survived the incubation and field-emergence processes; of those bees, the number of females that established at the nesting sites was 25-100%. Of the three field sites, one site consistently retained more females and produced more completed nests than the other sites, all of which usually had poor female establishment and progeny production. In addition, floral resources were depleted over time, but many flowers remained unvisited over the season. Nest production decreased over time, as numbers of flowers and female bees declined. Significant positive relationships were found between the intended stocking densities and 1) the number of females that actually survived incubation and field emergence and 2) the number of females that established nests. The number of females that established nests was positively affected by the number of females that survived to emerge in the field. The percentage of females that established was not significantly affected by the intended number of released bees, countering a prediction that the release of fewer bees would allow more females to establish nests and achieve high reproductive success. For growers, it may be more frugal to use modest numbers of M. rotundata for pollination, because many of the bees at medium and high stocking densities do not nest in grower-provided bee boards.

  18. Intended release and actual retention of alfalfa leafcutting bees (Hymenoptera: Megachilidae) for pollination in commercial alfalfa seed fields.

    PubMed

    Pitts-Singer, Theresa L

    2013-04-01

    Low, medium, and high stocking densities (15,000; 30,000; and 45,000-50,000 bees per acre, respectively) of Megachile rotundata (F.) (Hymenoptera: Megachilidae), the alfalfa leafcutting bee, were released over 4 yr in three research plots of Utah alfalfa, Medicago sativa L. (Fabaceae), planted at seed-production rates. A low percentage of bees (46-79% of released) survived the incubation and field-emergence processes; of those bees, the number of females that established at the nesting sites was 25-100%. Of the three field sites, one site consistently retained more females and produced more completed nests than the other sites, all of which usually had poor female establishment and progeny production. In addition, floral resources were depleted over time, but many flowers remained unvisited over the season. Nest production decreased over time, as numbers of flowers and female bees declined. Significant positive relationships were found between the intended stocking densities and 1) the number of females that actually survived incubation and field emergence and 2) the number of females that established nests. The number of females that established nests was positively affected by the number of females that survived to emerge in the field. The percentage of females that established was not significantly affected by the intended number of released bees, countering a prediction that the release of fewer bees would allow more females to establish nests and achieve high reproductive success. For growers, it may be more frugal to use modest numbers of M. rotundata for pollination, because many of the bees at medium and high stocking densities do not nest in grower-provided bee boards. PMID:23786042

  19. Applicability of a Micromechanics Model Based on Actual Microstructure for Failure Prediction of DP Steels

    SciTech Connect

    Choi, Kyoo Sil; Soulami, Ayoub; Liu, Wenning N.; Sun, Xin; Khaleel, Mohammad A.

    2009-04-01

    In this paper, various micromechanics models based on actual microstructures of DP steels are examined in order to determine the reasonable range of martensite volume fraction where the methodology described in this study can be applied. For this purpose, various micromechanics-based finite element models are first created based on the actual microstructures of DP steels with different martensite volume fractions. These models are, then, used to investigate the influence of ductility of the constituent ferrite and martensite phases and also the influence of voids in the ferrite phase on the overall ductility of DP steels. The computational results indicate that there is a range of martensite volume fraction where the phase inhomogeneity between the ferrite and martensite phases has dominant effect on the overall ductility of DP steels, defeating the influence of the ductility of each phase and the voids in the ferrite phase, and that this phase inhomogeneity dominant region includes the range of marteniste volume fraction between 15% and 40%. Therefore, the methodology, adopted in this study, may be applied to DP steels within the phase inhomogeneity dominant region in tailoring the DP steel design for its intended purpose and desired properties.

  20. Straight ladder inclined angle in a field environment: the relationship among actual angle, method of set-up and knowledge

    PubMed Central

    Chang, Wen-Ruey; Huang, Yueng-Hsiang; Chang, Chien-Chi; Brunette, Christopher; Fallentin, Nils

    2016-01-01

    Abstract Ladder inclined angle is a critical factor that could lead to a slip at the base of portable straight ladders, a major cause of falls from heights. Despite several methods established to help workers achieve the recommended 75.5° angle for ladder set-up, it remains unclear if these methods are used in practice. This study explored ladder set-up behaviours in a field environment. Professional installers of a company in the cable and other pay TV industry were observed for ladder set-up at their worksites. The results showed that the actual angles of 265 ladder set-ups by 67 participants averaged 67.3° with a standard deviation of 3.22°. Although all the participants had training on recommended ladder set-up methods, only 3 out of 67 participants applied these methods in their daily work and even they failed to achieve the desired 75.5° angle. Therefore, ladder set-up remains problematic in real-world situations. Practitioner Summary: Professional installers of a cable company were observed for portable straight ladder set-up at their worksites. The ladder inclined angle averaged 67.3° with a standard deviation of 3.22°, while the recommended angle is 75.5°. Only a few participants used the methods that they learned during training in their daily work. PMID:26672809

  1. Straight ladder inclined angle in a field environment: the relationship among actual angle, method of set-up and knowledge.

    PubMed

    Chang, Wen-Ruey; Huang, Yueng-Hsiang; Chang, Chien-Chi; Brunette, Christopher; Fallentin, Nils

    2016-08-01

    Ladder inclined angle is a critical factor that could lead to a slip at the base of portable straight ladders, a major cause of falls from heights. Despite several methods established to help workers achieve the recommended 75.5° angle for ladder set-up, it remains unclear if these methods are used in practice. This study explored ladder set-up behaviours in a field environment. Professional installers of a company in the cable and other pay TV industry were observed for ladder set-up at their worksites. The results showed that the actual angles of 265 ladder set-ups by 67 participants averaged 67.3° with a standard deviation of 3.22°. Although all the participants had training on recommended ladder set-up methods, only 3 out of 67 participants applied these methods in their daily work and even they failed to achieve the desired 75.5° angle. Therefore, ladder set-up remains problematic in real-world situations. Practitioner Summary: Professional installers of a cable company were observed for portable straight ladder set-up at their worksites. The ladder inclined angle averaged 67.3° with a standard deviation of 3.22°, while the recommended angle is 75.5°. Only a few participants used the methods that they learned during training in their daily work.

  2. A coupled remote sensing and simplified surface energy balance approach to estimate actual evapotranspiration from irrigated fields

    USGS Publications Warehouse

    Senay, G.B.; Budde, M.; Verdin, J.P.; Melesse, Assefa M.

    2007-01-01

    Accurate crop performance monitoring and production estimation are critical for timely assessment of the food balance of several countries in the world. Since 2001, the Famine Early Warning Systems Network (FEWS NET) has been monitoring crop performance and relative production using satellite-derived data and simulation models in Africa, Central America, and Afghanistan where ground-based monitoring is limited because of a scarcity of weather stations. The commonly used crop monitoring models are based on a crop water-balance algorithm with inputs from satellite-derived rainfall estimates. These models are useful to monitor rainfed agriculture, but they are ineffective for irrigated areas. This study focused on Afghanistan, where over 80 percent of agricultural production comes from irrigated lands. We developed and implemented a Simplified Surface Energy Balance (SSEB) model to monitor and assess the performance of irrigated agriculture in Afghanistan using a combination of 1-km thermal data and 250m Normalized Difference Vegetation Index (NDVI) data, both from the Moderate Resolution Imaging Spectroradiometer (MODIS) sensor. We estimated seasonal actual evapotranspiration (ETa) over a period of six years (2000-2005) for two major irrigated river basins in Afghanistan, the Kabul and the Helmand, by analyzing up to 19 cloud-free thermal and NDVI images from each year. These seasonal ETa estimates were used as relative indicators of year-to-year production magnitude differences. The temporal water-use pattern of the two irrigated basins was indicative of the cropping patterns specific to each region. Our results were comparable to field reports and to estimates based on watershed-wide crop water-balance model results. For example, both methods found that the 2003 seasonal ETa was the highest of all six years. The method also captured water management scenarios where a unique year-to-year variability was identified in addition to water-use differences between

  3. A Coupled Remote Sensing and Simplified Surface Energy Balance Approach to Estimate Actual Evapotranspiration from Irrigated Fields

    PubMed Central

    Senay, Gabriel B.; Budde, Michael; Verdin, James P.; Melesse, Assefa M.

    2007-01-01

    Accurate crop performance monitoring and production estimation are critical for timely assessment of the food balance of several countries in the world. Since 2001, the Famine Early Warning Systems Network (FEWS NET) has been monitoring crop performance and relative production using satellite-derived data and simulation models in Africa, Central America, and Afghanistan where ground-based monitoring is limited because of a scarcity of weather stations. The commonly used crop monitoring models are based on a crop water-balance algorithm with inputs from satellite-derived rainfall estimates. These models are useful to monitor rainfed agriculture, but they are ineffective for irrigated areas. This study focused on Afghanistan, where over 80 percent of agricultural production comes from irrigated lands. We developed and implemented a Simplified Surface Energy Balance (SSEB) model to monitor and assess the performance of irrigated agriculture in Afghanistan using a combination of 1-km thermal data and 250-m Normalized Difference Vegetation Index (NDVI) data, both from the Moderate Resolution Imaging Spectroradiometer (MODIS) sensor. We estimated seasonal actual evapotranspiration (ETa) over a period of six years (2000-2005) for two major irrigated river basins in Afghanistan, the Kabul and the Helmand, by analyzing up to 19 cloud-free thermal and NDVI images from each year. These seasonal ETa estimates were used as relative indicators of year-to-year production magnitude differences. The temporal water-use pattern of the two irrigated basins was indicative of the cropping patterns specific to each region. Our results were comparable to field reports and to estimates based on watershed-wide crop water-balance model results. For example, both methods found that the 2003 seasonal ETa was the highest of all six years. The method also captured water management scenarios where a unique year-to-year variability was identified in addition to water-use differences between

  4. Estimation of Actual Evapotranspiration by Remote Sensing: Application in Thessaly Plain, Greece

    PubMed Central

    Tsouni, Alexia; Kontoes, Charalabos; Koutsoyiannis, Demetris; Elias, Panagiotis; Mamassis, Nikos

    2008-01-01

    Remote sensing can assist in improving the estimation of the geographical distribution of evapotranspiration, and consequently water demand in large cultivated areas for irrigation purposes and sustainable water resources management. In the direction of these objectives, the daily actual evapotranspiration was calculated in this study during the summer season of 2001 over the Thessaly plain in Greece, a wide irrigated area of great agricultural importance. Three different methods were adapted and applied: the remote-sensing methods by Granger (2000) and Carlson and Buffum (1989) that use satellite data in conjunction with ground meteorological measurements and an adapted FAO (Food and Agriculture Organisation) Penman-Monteith method (Allen at al. 1998), which was selected to be the reference method. The satellite data were used in conjunction with ground data collected on the three closest meteorological stations. All three methods, exploit visible channels 1 and 2 and infrared channels 4 and 5 of NOAA-AVHRR (National Oceanic and Atmospheric Administration - Advanced Very High Resolution Radiometer) sensor images to calculate albedo and NDVI (Normalised Difference Vegetation Index), as well as surface temperatures. The FAO Penman-Monteith and the Granger method have used exclusively NOAA-15 satellite images to obtain mean surface temperatures. For the Carlson-Buffum method a combination of NOAA-14 and NOAA-15 satellite images was used, since the average rate of surface temperature rise during the morning was required. The resulting estimations show that both the Carlson-Buffum and Granger methods follow in general the variations of the reference FAO Penman-Monteith method. Both methods have potential for estimating the spatial distribution of evapotranspiration, whereby the degree of the relative agreement with the reference FAO Penman-Monteith method depends on the crop growth stage. In particular, the Carlson-Buffum method performed better during the first half

  5. Implementation of the SSHAC Guidelines for Level 3 and 4 PSHAs - Experience Gained from Actual Applications

    USGS Publications Warehouse

    Hanks, Thomas C.; Abrahamson, Norm A.; Boore, David M.; Coppersmith, Kevin J.; Knepprath, Nichole E.

    2009-01-01

    In April 1997, after four years of deliberations, the Senior Seismic Hazard Analysis Committee released its report 'Recommendations for Probabilistic Seismic Hazard Analysis: Guidance on Uncertainty and Use of Experts' through the U.S. Nuclear Regulatory Commission as NUREG/CR-6372, hereafter SSHAC (1997). Known informally ever since as the 'SSHAC Guidelines', SSHAC (1997) addresses why and how multiple expert opinions - and the intrinsic uncertainties that attend them - should be used in Probabilistic Seismic Hazard Analyses (PSHA) for critical facilities such as commercial nuclear power plants. Ten years later, in September 2007, the U.S. Geological Survey (USGS) entered into a 13-month agreement with the U.S. Nuclear Regulatory Commission (NRC) titled 'Practical Procedures for Implementation of the SSHAC Guidelines and for Updating PSHAs'. The NRC was interested in understanding and documenting lessons learned from recent PSHAs conducted at the higher SSHAC Levels (3 and 4) and in gaining input from the seismic community for updating PSHAs as new information became available. This study increased in importance in anticipation of new applications for nuclear power facilities at both existing and new sites. The intent of this project was not to replace the SSHAC Guidelines but to supplement them with the experience gained from putting the SSHAC Guidelines to work in practical applications. During the course of this project, we also learned that updating PSHAs for existing nuclear power facilities involves very different issues from the implementation of the SSHAC Guidelines for new facilities. As such, we report our findings and recommendations from this study in two separate documents, this being the first. The SSHAC Guidelines were written without regard to whether the PSHAs to which they would be applied were site-specific or regional in scope. Most of the experience gained to date from high-level SSHAC studies has been for site-specific cases, although three

  6. Evaluation of a total dissolved solids model in comparison to actual field data measurements in the Cheyenne River, South Dakota, U.S.A.

    PubMed

    Berdanier, Bruce W; Ziadat, Anf H

    2006-06-01

    During the summers of 2002 and 2004, in-stream integrated flow and concentration measurements for the total dissolved solids in the Cheyenne River, South Dakota, USA was conducted in order to compare the obtained actual field measurements with the predictions values made by the Bureau of Reclamation in the Environmental Impact Statement. In comparison to the actual field measurements conducted in this study, The Bureau of Reclamation extension of a small database used in the analysis for the impact of operations at the Angostura Unit over the past 50 years and into the future to predict the annual total dissolved solid loadings doesn't represent the actual loading values and various conditions in the study area. Additional integrated flow and concentration sampling is required to characterize the impact of the current Angostura Dam operations and Angostura Irrigation District return flows on the Cheyenne River in different seasons of the year. PMID:16917716

  7. Medical applications of electromagnetic fields

    NASA Astrophysics Data System (ADS)

    Lai, Henry C.; Singh, Narendra P.

    2010-04-01

    In this article, we describe two possible applications of low-intensity non-ionizing electromagnetic fields (EMF) for the treatment of malaria and cancer, respectively. In malaria treatment, a low-intensity extremely-low frequency magnetic field can be used to induce vibration of hemozoin, a super-paramagnetic polymer particle, inside malaria parasites. This disturbance could cause free radical and mechanical damages leading to the death of the parasite. This concept has been tested in vitro on malaria parasites and found to be effective. This may provide a low cost effective treatment for malaria infection in humans. The rationale for cancer treatment using low-intensity EMF is based on two concepts that have been well established in the literature: (1) low-intensity non-thermal EMF enhances cytotoxic free radicals via the iron-mediated Fenton reaction; and (2) cancer cells have higher amounts of free iron, thus are more susceptible to the cytotoxic effects of EMF. Since normal cells contain minimal amount of free iron, the effect would be selectively targeting cancer cells. Thus, no adverse side effect would be expected as in traditional chemotherapy and radiation therapy. This concept has also been tested on human cancer cell and normal cells in vitro and proved to be feasible.

  8. Testing an Energy Balance Model for Estimating Actual Evapotranspiration Using Remotely Sensed Data. [Hannover, West Germany barley and wheat fields

    NASA Technical Reports Server (NTRS)

    Gurney, R. J.; Camillo, P. J.

    1985-01-01

    An energy-balance model is used to estimate daily evapotranspiration for 3 days for a barley field and a wheat field near Hannover, Federal Republic of Germany. The model was calibrated using once-daily estimates of surface temperatures, which may be remotely sensed. The evaporation estimates were within the 95% error bounds of independent eddy correlation estimates for the daytime periods for all three days for both sites, but the energy-balance estimates are generally higher; it is unclear which estimate is biassed. Soil moisture in the top 2 cm of soil, which may be remotely sensed, may be used to improve these evaporation estimates under partial ground cover. Sensitivity studies indicate the amount of ground data required is not excessive.

  9. Actual Condition of Paddy Field Levee Maintenance by Various Farm Households including Large-scale Farming in the Developed Land Renting Area

    NASA Astrophysics Data System (ADS)

    Sakata, Yasuyo

    The survey of interview, resource acquisition, photographic operation, and questionnaire were carried out in the “n” Community in the “y” District in Hakusan City in Ishikawa Prefecture to investigate the actual condition of paddy field levee maintenance in the area where land-renting market was proceeding, large-scale farming was dominant, and the problems of geographically scattered farm-land existed. In the study zone, 1) an agricultural production legal person rent-cultivated some of the paddy fields and maintained the levees, 2) another agricultural production legal person rent-cultivated some of the soy bean fields for crop changeover and land owners maintained the levees. The results indicated that sufficient maintenance was executed on the levees of the paddy fields cultivated by the agricultural production legal person, the soy bean fields for crop changeover, and the paddy fields cultivated by the land owners. Each reason is considered to be the managerial strategy, the economic incentive, the mutual monitoring and cross-regulatory mechanism, etc.

  10. Perceived Growth versus Actual Growth in Executive Leadership Competencies: An Application of the Stair-Step Behaviorally Anchored Evaluation Approach

    ERIC Educational Resources Information Center

    McCormick, Michael J.; Dooley, Kim E.; Lindner, James R.; Cummins, Richard L.

    2007-01-01

    The purpose of this study was to describe student learning in executive leadership core competencies after being engaged in a two-semester leadership education sequence. The researchers used evaluative research techniques to compare perceived and actual growth in learning of executive leadership competencies. Data collection consisted of a…

  11. Discrimination of rapeseed and weeds under actual field conditions based on principal component analysis and artificial neural network by VIS/NIR spectroscopy

    NASA Astrophysics Data System (ADS)

    Huang, Min; Bao, Yidan; He, Yong

    2007-11-01

    The study documented successful discrimination between five weed species and rapeseed plants under actual field conditions using visible and near infrared (Vis/NIR) spectroscopy. A hybrid recognition model, BP artificial neural networks (BP-ANN) combined with principal component analysis (PCA), had been established for discrimination of weeds in rapeseed field. Spectra tests were performed on the rapeseed and five-weed species canopy of 180 samples in the field using a spectrophotometer (325-1075 nm). 6 optimal PCs were selected as the input of BP neural networks to build the prediction model. Rapeseed samples were marked as 1, while the five weed species marked as 2, 3, 4, 5, 6, which were used as output set of BP-ANN. 120 samples were randomly selected as the training set, and the remainder as prediction set. It showed excellent predictions with the correlation value of 0.9745, and the relative standard deviation (RSD) was under 5% thus 100% of prediction accuracy was achieved. The results are promising for further work in real-time identification of weed patches in rapeseed fields for precision weed management.

  12. BOREHOLE FLOWMETERS: FIELD APPLICATION AND DATA ANALYSIS

    EPA Science Inventory

    This paper reviews application of borehole flowmeters in granular and fractured rocks. Basic data obtained in the field are the ambient flow log and the pumping-induced flow log. These basic logs may then be used to calculate other quantities of interest. The paper describes the ...

  13. Estimation of Actual Crop ET of Paddy Using the Energy Balance Model SMARET and Validation with Field Water Balance Measurements and a Crop Growth Model (ORYZA)

    NASA Astrophysics Data System (ADS)

    Nallasamy, N. D.; Muraleedharan, B. V.; Kathirvel, K.; Narasimhan, B.

    2014-12-01

    Sustainable management of water resources requires reliable estimates of actual evapotranspiration (ET) at fine spatial and temporal resolution. This is significant in the case of rice based irrigation systems, one of the major consumers of surface water resources and where ET forms a major component of water consumption. However huge tradeoff in the spatial and temporal resolution of satellite images coupled with lack of adequate number of cloud free images within a growing season act as major constraints in deriving ET at fine spatial and temporal resolution using remote sensing based energy balance models. The scale at which ET is determined is decided by the spatial and temporal scale of Land Surface Temperature (LST) and Normalized Difference Vegetation Index (NDVI), which form inputs to energy balance models. In this context, the current study employed disaggregation algorithms (NL-DisTrad and DisNDVI) to generate time series of LST and NDVI images at fine resolution. The disaggregation algorithms aimed at generating LST and NDVI at finer scale by integrating temporal information from concurrent coarse resolution data and spatial information from a single fine resolution image. The temporal frequency of the disaggregated images is further improved by employing composite images of NDVI and LST in the spatio-temporal disaggregation method. The study further employed half-hourly incoming surface insolation and outgoing long wave radiation obtained from the Indian geostationary satellite (Kalpana-1) to convert the instantaneous ET into daily ET and subsequently to the seasonal ET, thereby improving the accuracy of ET estimates. The estimates of ET were validated with field based water balance measurements carried out in Gadana, a subbasin predominated by rice paddy fields, located in Tamil Nadu, India.

  14. Space applications of superconductivity - High field magnets

    NASA Technical Reports Server (NTRS)

    Fickett, F. R.

    1979-01-01

    The paper discusses developments in superconducting magnets and their applications in space technology. Superconducting magnets are characterized by high fields (to 15T and higher) and high current densities combined with low mass and small size. The superconducting materials and coil design are being improved and new high-strength composites are being used for magnet structural components. Such problems as maintaining low cooling temperatures (near 4 K) for long periods of time and degradation of existing high-field superconductors at low strain levels can be remedied by research and engineering. Some of the proposed space applications of superconducting magnets include: cosmic ray analysis with magnetic spectrometers, energy storage and conversion, energy generation by magnetohydrodynamic and thermonuclear fusion techniques, and propulsion. Several operational superconducting magnet systems are detailed.

  15. Field ionizing elements and applications thereof

    NASA Technical Reports Server (NTRS)

    Hartley, Frank T. (Inventor)

    2003-01-01

    A field ionizing element formed of a membrane that houses electrodes therein that are located closer to one another than the mean free path of the gas being ionized. The membrane includes a supporting portion, and a non supporting portion where the ions are formed. The membrane may be used as the front end for a number of different applications including a mass spectrometer, a thruster, an ion mobility element, or an electrochemical device such as a fuel cell.

  16. Field-Sensitive Materials for Optical Applications

    NASA Technical Reports Server (NTRS)

    Choi, Sang H.; Little, Mark

    2002-01-01

    The purpose of investigation is to develop the fundamental materials and fabrication technology for field-controlled spectrally active optics that are essential for industry, NASA, and DOD (Department of Defense) applications such as: membrane optics, filters for LIDARs (Light Detection and Ranging), windows for sensors and probes, telescopes, spectroscopes, cameras, light valves, light switches, flat-panel displays, etc. The proposed idea is based on the quantum-dots (QD) array or thin-film of field-sensitive Stark and Zeeman materials and the bound excitonic state of organic crystals that will offer optical adaptability and reconfigurability. Major tasks are the development of concept demonstration article and test data of field-controlled spectrally smart active optics (FCSAO) for optical multi-functional capabilities on a selected spectral range.

  17. Nanosensors: From near field to far field applications

    NASA Astrophysics Data System (ADS)

    Herrera, Gloria M.; Félix, Hilsamar; Fierro, Pedro M.; Balaguera, Marcia; Pacheco, Leonardo; Briano, Julio G.; Marquez, Francisco; Ríos, Carlos; Hernández-Rivera, Samuel P.

    2011-06-01

    The DoD Center for Chemical Sensors Development at the University of Puerto Rico-Mayagüez has worked in developing sensors for threat agents for over 8 years. Work has continued under the ALERT DHS Center of Excellence. The approaches for sensing have covered many types of threat chemicals and some types of biological simulants, including high energetic materials, homemade explosives, mixtures and formulations, chemical agents simulants, toxic industrial chemicals and spore forming microorganisms. Sensing in the far field has been based in vibrational spectroscopy: Raman and infrared. Near field detection has been mainly based on nanotechnology enabled sensing platforms for Surface Enhanced Raman Scattering. Initial use of colloidal suspensions of silver and gold nanospheres eventually evolved to metallic and metal oxide nanorods and to particle immobilization, including sample smearing on substrates and drop-on-demand thermal inkjet printing of nanoparticles. Chemical reduction of metal ions has been substituted by clean photonic physical reduction that leaves the nanoactive surface highly exposed and overcomes the physico-chemical problem of double electrical layers posed by colloidal suspensions of nanoparticles. New avenues have open wide research endeavors by using laser techniques to form nanoprisms and interference based metallic nano-images and micro-images. UV based metal reduction on top of metal oxides nanostructures promises to provide the selectivity and sensitivity expected for the last 30-40 years. Various applications and experimental setups will be discussed.

  18. Applications of GPS technologies to field sports.

    PubMed

    Aughey, Robert J

    2011-09-01

    Global positioning system (GPS) technology was made possible after the invention of the atomic clock. The first suggestion that GPS could be used to assess the physical activity of humans followed some 40 y later. There was a rapid uptake of GPS technology, with the literature concentrating on validation studies and the measurement of steady-state movement. The first attempts were made to validate GPS for field sport applications in 2006. While GPS has been validated for applications for team sports, some doubts continue to exist on the appropriateness of GPS for measuring short high-velocity movements. Thus, GPS has been applied extensively in Australian football, cricket, hockey, rugby union and league, and soccer. There is extensive information on the activity profile of athletes from field sports in the literature stemming from GPS, and this includes total distance covered by players and distance in velocity bands. Global positioning systems have also been applied to detect fatigue in matches, identify periods of most intense play, different activity profiles by position, competition level, and sport. More recent research has integrated GPS data with the physical capacity or fitness test score of athletes, game-specific tasks, or tactical or strategic information. The future of GPS analysis will involve further miniaturization of devices, longer battery life, and integration of other inertial sensor data to more effectively quantify the effort of athletes.

  19. Field applications of ion-mobility spectrometry

    NASA Astrophysics Data System (ADS)

    Brown, Patricia A.

    1997-02-01

    Ion mobility spectrometry (IMS) is an excellent tool for detection of controlled substances under field conditions. Plasmagrams and tables showing the results of field applications will be discussed. Residues of drugs, such as cocaine and heroin, can be left anywhere including vehicles, boats, and houses. In houses, the carpets, walls, and floors are good locations for residues to adhere. Individual clothing can also be contaminated with drug residue. Vehicles that are suspected of having previously smuggled illegal substances can be vacuumed and screened. Tablets that look similar and respond the same when screened with the Marquis reagent can be differentiated by IMS. With Southern California being the 'methamphetamine capital of the world' and the resurgence of phencyclidine, IMS has proven extremely valuable in the screening of abandoned clandestine laboratory sites and vehicles in which the clandestine laboratories; chemicals and glassware were transported. IMS is very responsive to ephedrine/pseudophedrine, a precursor of methamphetamine and 1-piperidinocyclohexanecarbonitrile, an intermediate of phencyclidine. Once residues are detected, vacuum samples, and/or methanol wipes are collected and analyzed at the DEA Laboratory for confirmation of the suspected substance using GC-IRD or Mass Spectrometry.

  20. Form and Actuality

    NASA Astrophysics Data System (ADS)

    Bitbol, Michel

    A basic choice underlies physics. It consists of banishing actual situations from theoretical descriptions, in order to reach a universal formal construct. Actualities are then thought of as mere local appearances of a transcendent reality supposedly described by the formal construct. Despite its impressive success, this method has left major loopholes in the foundations of science. In this paper, I document two of these loopholes. One is the problem of time asymmetry in statistical thermodynamics, and the other is the measurement problem of quantum mechanics. Then, adopting a broader philosophical standpoint, I try to turn the whole picture upside down. Here, full priority is given to actuality (construed as a mode of the immanent reality self-reflectively being itself) over formal constructs. The characteristic aporias of this variety of "Copernican revolution" are discussed.

  1. Field Testing: A Model and Its Applications.

    ERIC Educational Resources Information Center

    Goldstein, Marjorie T.

    Described is a Social Learning Curriculum (SLC) field test model that focuses on aspects of personnel utilization, communication systems, and the quality of human communication and that highlights the role of the supervisor in the education of the mentally retarded. The four field test model phases discussed are 1) the planning phase (including…

  2. Field applications of a carbon fiber sheet material for strengthening reinforced concrete structure

    SciTech Connect

    Thomas, J.; Kliger, H.S.; Yoshizawa, Hiroyuki

    1996-12-31

    Forca Tow Sheet is now being introduced into the USA as a viable alternative to conventional concrete strengthen techniques. This carbon fiber shoot material is externally bonded to reinforced concrete and masonry structures and serves to strengthen existing conditions. Based on the growing use of Tow Sheet in the Japanese market die US infrastructure market is beginning to apply this technology on a number of diverse repair projects. This paper describes actual field applications on industrial and public structures in the US and Japan. Also included are the results of one yen of monitoring of die Japanese structure.

  3. 30 CFR 18.94 - Application for field approval; contents of application.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Application for field approval; contents of... TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS ELECTRIC MOTOR-DRIVEN MINE EQUIPMENT AND ACCESSORIES Field Approval of Electrically Operated Mining Equipment § 18.94 Application for field...

  4. Matrix field theory: Applications to superconductivity

    NASA Astrophysics Data System (ADS)

    Zhou, Lubo

    In this thesis a systematic, functional matrix field theory is developed to describe both clean and disordered s-wave and d-wave superconductors and the quantum phase transitions associated with them. The thesis can be divided into three parts. The first part includes chapters 1 to 3. In chapter one a general physical introduction is given. In chapters two and three the theory is developed and used to compute the equation of state as well as the number-density susceptibility, spin-density susceptibility, the sound attenuation coefficient, and the electrical conductivity in both clean and disordered s-wave superconductors. The second part includes chapter four. In this chapter we use the theory to describe the disorder-induced metal - superconductor quantum phase transition. The key physical idea here is that in addition to the superconducting order-parameter fluctuations, there are also additional soft fermionic fluctuations that are important at the transition. We develop a local field theory for the coupled fields describing superconducting and soft fermionic fluctuations. Using simple renormalization group and scaling ideas, we exactly determine the critical behavior at this quantum phase transition. Our theory justifies previous approaches. The third part includes chapter five. In this chapter we study the analogous quantum phase transition in disordered d-wave superconductors. This theory should be related to high Tc superconductors. Surprisingly, we show that in both the underdoped and overdoped regions, the coupling of superconducting fluctuations to the soft disordered fermionic fluctuations is much weaker than that in the s-wave case. The net result is that the disordered quantum phase transition in this case is a strong coupling, or described by an infinite disordered fixed point, transition and cannot be described by the perturbative RG description that works so well in the s-wave case. The transition appears to be related to the one that occurs in

  5. Hand geometry field application data analysis

    SciTech Connect

    Ruehle, M.; Ahrens, J.

    1997-03-01

    Over the last fifteen years, Sandia National Laboratories Security Systems and Technology Center, Department 5800, has been involved in several laboratory tests of various biometric identification devices. These laboratory tests were conducted to verify the manufacturer`s performance claims, to determine strengths and weaknesses of particular devices, and to evaluate which devices meet the US Department of Energy`s unique needs for high-security devices. However, during a recent field installation of one of these devices, significantly different performance was observed than had been predicted by these laboratory tests. This report documents the data analysis performed in the search for an explanation of these differences.

  6. Full-field OCT: applications in ophthalmology

    NASA Astrophysics Data System (ADS)

    Grieve, Kate; Dubois, Arnaud; Paques, Michel; Le Gargasson, Jean-Francois; Boccara, Albert C.

    2005-04-01

    We present images of ocular tissues obtained using ultrahigh resolution full-field OCT. The experimental setup is based on the Linnik interferometer, illuminated by a tungsten halogen lamp. En face tomographic images are obtained in real-time without scanning by computing the difference of two phase-opposed interferometric images recorded by a high-resolution CCD camera. A spatial resolution of 0.7 μm × 0.9 μm (axial × transverse) is achieved thanks to the short source coherence length and the use of high numerical aperture microscope objectives. A detection sensitivity of 90 dB is obtained by means of image averaging and pixel binning. Whole unfixed eyes and unstained tissue samples (cornea, lens, retina, choroid and sclera) of ex vivo rat, mouse, rabbit and porcine ocular tissues were examined. The unprecedented resolution of our instrument allows cellular-level resolution in the cornea and retina, and visualization of individual fibers in the lens. Transcorneal lens imaging was possible in all animals, and in albino animals, transscleral retinal imaging was achieved. We also introduce our rapid acquisition full-field optical coherence tomography system designed to accommodate in vivo ophthalmologic imaging. The variations on the original system technology include the introduction of a xenon arc lamp as source, and rapid image acquisition performed by a high-speed CMOS camera, reducing acquisition time to 5 ms per frame.

  7. Effects of herbicide applications in wheat fields

    PubMed Central

    Varshney, Sugandha; Hayat, Shamshul; Alyemeni, Mohammed Nasser; Ahmad, Aqil

    2012-01-01

    The present review encompasses the physiological and yield constraints of herbicide applications with special reference to wheat productivity. Post-independence lagging of Indian agriculture to feed its population led to haphazard use of chemical pesticides and weedicides which deteriorated the productivity pay-off particularly of wheat and rice. Past some decades witnessed the potential use of certain phytohormones in augmenting abiotic stress to get rid of yield gap and productivity constraints. We summed up with reviewing the potential role of these natural regulators in overcoming above mentioned drawbacks to substitute or to integrate these chemicals with the use of plant hormones. PMID:22516826

  8. Advanced COIL technologies for field applications

    NASA Astrophysics Data System (ADS)

    Tei, Kazuyoku; Sugimoto, Daichi; Ito, T.; Watanabe, G.; Vyskubenko, O.; Takeuchi, N.; Muto, S.; Kenzo, N.; Fujioka, Tomoo

    2005-01-01

    Chemical oxygen-iodine laser (COIL) has a great potential for applications such as decommissioning and dismantlement (D&D) of nuclear reactor, rock destruction and removal and extraction of a natural resource (Methane hydrate) because of the unique characteristics such as power scalability, high optical beam quality and optical fiber beam. Five-kilowatt Chemical oxygen-iodine laser (COIL) test facility has been developed. The chemical efficiency of 27% has been demonstrated with a moderate beam quality for optical fiber coupling. Our research program contains conventional/ejector-COIL scheme, Jet-SOG/Mist-SOG optimization, fiber delivery and long-term operation.

  9. Scalable parallel distance field construction for large-scale applications

    SciTech Connect

    Yu, Hongfeng; Xie, Jinrong; Ma, Kwan -Liu; Kolla, Hemanth; Chen, Jacqueline H.

    2015-10-01

    Computing distance fields is fundamental to many scientific and engineering applications. Distance fields can be used to direct analysis and reduce data. In this paper, we present a highly scalable method for computing 3D distance fields on massively parallel distributed-memory machines. Anew distributed spatial data structure, named parallel distance tree, is introduced to manage the level sets of data and facilitate surface tracking overtime, resulting in significantly reduced computation and communication costs for calculating the distance to the surface of interest from any spatial locations. Our method supports several data types and distance metrics from real-world applications. We demonstrate its efficiency and scalability on state-of-the-art supercomputers using both large-scale volume datasets and surface models. We also demonstrate in-situ distance field computation on dynamic turbulent flame surfaces for a petascale combustion simulation. In conclusion, our work greatly extends the usability of distance fields for demanding applications.

  10. Scalable Parallel Distance Field Construction for Large-Scale Applications.

    PubMed

    Yu, Hongfeng; Xie, Jinrong; Ma, Kwan-Liu; Kolla, Hemanth; Chen, Jacqueline H

    2015-10-01

    Computing distance fields is fundamental to many scientific and engineering applications. Distance fields can be used to direct analysis and reduce data. In this paper, we present a highly scalable method for computing 3D distance fields on massively parallel distributed-memory machines. A new distributed spatial data structure, named parallel distance tree, is introduced to manage the level sets of data and facilitate surface tracking over time, resulting in significantly reduced computation and communication costs for calculating the distance to the surface of interest from any spatial locations. Our method supports several data types and distance metrics from real-world applications. We demonstrate its efficiency and scalability on state-of-the-art supercomputers using both large-scale volume datasets and surface models. We also demonstrate in-situ distance field computation on dynamic turbulent flame surfaces for a petascale combustion simulation. Our work greatly extends the usability of distance fields for demanding applications. PMID:26357251

  11. Scalable Parallel Distance Field Construction for Large-Scale Applications.

    PubMed

    Yu, Hongfeng; Xie, Jinrong; Ma, Kwan-Liu; Kolla, Hemanth; Chen, Jacqueline H

    2015-10-01

    Computing distance fields is fundamental to many scientific and engineering applications. Distance fields can be used to direct analysis and reduce data. In this paper, we present a highly scalable method for computing 3D distance fields on massively parallel distributed-memory machines. A new distributed spatial data structure, named parallel distance tree, is introduced to manage the level sets of data and facilitate surface tracking over time, resulting in significantly reduced computation and communication costs for calculating the distance to the surface of interest from any spatial locations. Our method supports several data types and distance metrics from real-world applications. We demonstrate its efficiency and scalability on state-of-the-art supercomputers using both large-scale volume datasets and surface models. We also demonstrate in-situ distance field computation on dynamic turbulent flame surfaces for a petascale combustion simulation. Our work greatly extends the usability of distance fields for demanding applications.

  12. Various applications of Active Field Control (AFC)

    NASA Astrophysics Data System (ADS)

    Watanabe, Takayuki; Miyazaki, Hideo; Kishinaga, Shinji; Kawakami, Fukushi

    2003-10-01

    AFC is an electro-acoustic enhancement system, which has been under development at Yamaha Corporation. In this paper, several types of various AFC applications are discussed, while referring to representative projects for each application in Japan. (1) Realization of acoustics in a huge hall to classical music program, e.g., Tokyo International Forum. This venue is a multipurpose hall with approximately 5000 seats. AFC achieves loudness and reverberance equivalent to those of a hall with 2500 seats or fewer. (2) Optimization of acoustics for a variety of programs, e.g., Arkas Sasebo. AFC is used to create the optimum acoustics for each program, such as reverberance for classical concerts, acoustical support for opera singers, uniformity throughout the hall from the stage to under-balcony area, etc. (3) Control of room shape acoustical effect, e.g., Osaka Central Public Hall: In this renovation project, preservation of historically important architecture in the original form is required. AFC is installed to vary only the acoustical environment without architectural changes. (4) Assistance with crowd enthusiasm for sports entertainment, e.g., Tokyo Metropolitan Gymnasium. In this venue, which is designed as a very absorptive space for speech intelligibility, AFC is installed to enhance the atmosphere of live sports entertainment.

  13. Techniques for Field Application of Lingual Ultrasound Imaging

    ERIC Educational Resources Information Center

    Gick, Bryan; Bird, Sonya; Wilson, Ian

    2005-01-01

    Techniques are discussed for using ultrasound for lingual imaging in field-related applications. The greatest challenges we have faced distinguishing the field setting from the laboratory setting are the lack of controlled head/transducer movement, and the related issue of tissue compression. Two experiments are reported. First, a pilot study…

  14. Magnetic field applications in modern technology and medicine

    SciTech Connect

    Tenforde, T.S.

    1985-05-01

    A brief summary is given of several major applications of magnetism. A description of the range of magnetic field intensities to which humans are exposed in technologies that utilize large stationary magnetic fields is given. 12 refs., 8 figs., 3 tabs.

  15. Field effect sensors for PCR applications

    NASA Astrophysics Data System (ADS)

    Taing, Meng-Houit; Sweatman, Denis R.

    2004-03-01

    The use of field effect sensors for biological and chemical sensing is widely employed due to its ability to make detections based on charge and surface potential. Because proteins and DNA almost always carry a charge [1], silicon can be used to micro fabricate such a sensor. The EIS structure (Electrolyte on Insulator on Silicon) provides a novel, label-free and simple to fabricate way to make a field effect DNA detection sensor. The sensor responds to fluctuating capacitance caused by a depletion layer thickness change at the surface of the silicon substrate through DNA adsorption onto the dielectric oxide/PLL (Poly-L-Lysine) surface. As DNA molecules diffuse to the sensor surface, they are bound to their complimentary capture probes deposited on the surface. The negative charge exhibited by the DNA forces negative charge carriers in the substrate to move away from the surface. This causes an n-type depletion layer substrate to thicken and a p-type to thin. The depletion layer thickness can be measured by its capacitance using an LCR meter. This experiment is conducted using the ConVolt (constant voltage) approach. Nucleic acids are amplified by an on chip PCR (Polymerase Chain Reaction) system and then fed into the sensor. The low ionic solution strength will ensure that counter-ions do not affect the sensor measurements. The sensor surface contains capture probes that bind to the pathogen. The types of pathogens we"ll be detecting include salmonella, campylobacter and E.Coli DNA. They are held onto the sensor surface by the positively charged Poly-L-Lysine layer. The electrolyte is biased through a pseudo-reference electrode. Pseudo reference electrodes are usually made from metals such as Platinum or Silver. The problem associated with "floating" biasing electrodes is they cannot provide stable biasing potentials [2]. They drift due to surface charging effects and trapped charges on the surface. To eliminate this, a differential system consisting of 2 sensors

  16. Know your community: Model applications in field research

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The focus of this community is to promote the application of cropping or range system models in field research to help evaluate and develop optimum agricultural systems and management to achieve long-term economic and environmental sustainability under a changing climate. Model applications to a var...

  17. Application of Terahertz Field Enhancement Effect in Metal Microstructures

    NASA Astrophysics Data System (ADS)

    Nakajima, M.; Kurihara, T.; Tadokoro, Y.; Kang, B.; Takano, K.; Yamaguchi, K.; Watanabe, H.; Oto, K.; Suemoto, T.; Hangyo, M.

    2016-10-01

    Applications of high-field terahertz pulses are attractive in physics and terahertz technology. In this study, two applications related to high-intensity terahertz pulses are demonstrated. The field enhancement effect by subwavelength metallic microstructures is utilized for terahertz excitation measurement. The spin precession dynamics in magnetic materials was induced by a terahertz magnetic field. Spin precession was amplified by one order of magnitude in amplitude by the enhanced magnetic terahertz field in orthoferrite ErFeO3 with metal microstructures. The induced spin dynamics was analyzed and explained by LLG-LCR model. Moreover, a detection method for terahertz pulses was developed using a cholesteric liquid crystal at room temperature without any electronic devices. The beam profile of terahertz pulses was visualized and compared to other methods such as the knife edge method using pyroelectric detector and micro-bolometer array. The liquid crystal terahertz imager is very simple and has good applicability as a portable terahertz-sensing card.

  18. Field Data Collection: an Essential Element in Remote Sensing Applications

    NASA Technical Reports Server (NTRS)

    Pettinger, L. R.

    1971-01-01

    Field data collected in support of remote sensing projects are generally used for the following purposes: (1) calibration of remote sensing systems, (2) evaluation of experimental applications of remote sensing imagery on small test sites, and (3) designing and evaluating operational regional resource studies and inventories which are conducted using the remote sensing imagery obtained. Field data may be used to help develop a technique for a particular application, or to aid in the application of that technique to a resource evaluation or inventory problem for a large area. Scientists at the Forestry Remote Sensing Laboratory have utilized field data for both purposes. How meaningful field data has been collected in each case is discussed.

  19. Recent Developments and Applications of the CHARMM force fields.

    PubMed

    Zhu, Xiao; Lopes, Pedro E M; Mackerell, Alexander D

    2012-01-01

    Empirical force fields commonly used to describe the condensed phase properties of complex systems such as biological macromolecules are continuously being updated. Improvements in quantum mechanical (QM) methods used to generate target data, availability of new experimental target data, incorporation of new classes of compounds and new theoretical developments (eg. polarizable methods) make force-field development a dynamic domain of research. Accordingly, a number of improvements and extensions of the CHARMM force fields have occurred over the years. The objective of the present review is to provide an up-to-date overview of the CHARMM force fields. A limited presentation on the historical aspects of force fields will be given, including underlying methodologies and principles, along with a brief description of the strategies used for parameter development. This is followed by information on the CHARMM additive and polarizable force fields, including examples of recent applications of those force fields.

  20. A field-sweep/field-lock system for superconducting magnets--Application to high-field EPR.

    PubMed

    Maly, Thorsten; Bryant, Jeff; Ruben, David; Griffin, Robert G

    2006-12-01

    We describe a field-lock/field-sweep system for the use in superconducting magnets. The system is based on a commercially available field mapping unit and a custom designed broad-band 1H NMR probe. The NMR signal of a small water sample is used in a feedback loop to set and control the magnetic field to high accuracy. The current instrumental configuration allows field sweeps of +/-0.4 T and a resolution of up to 10(-5) T (0.1 G) and the performance of the system is demonstrated in a high-field electron paramagnetic resonance (EPR) application. The system should also be of utility in other experiments requiring precise and reproducible sweeps of the magnetic field such as DNP, ENDOR or PELDOR.

  1. A Field-Sweep/Field-Lock System for Superconducting Magnets-Application to High-Field EPR

    PubMed Central

    Maly, Thorsten; Bryant, Jeff; Ruben, David; Griffin, Robert G.

    2007-01-01

    We describe a field-lock/field-sweep system for the use in superconducting magnets. The system is based on a commercially available field mapping unit and a custom designed broad-band 1H-NMR probe. The NMR signal of a small water sample is used in a feedback loop to set and control the magnetic field to high accuracy. The current instrumental configuration allows field sweeps of ± 0.4 T and a resolution of up to 10-5 T (0.1 G) and the performance of the system is demonstrated in a high-field electron paramagnetic resonance (EPR) application. The system should also be of utility in other experiments requiring precise and reproducible sweeps of the magnetic field such as DNP, ENDOR or PELDOR. PMID:17027306

  2. 30 CFR 18.94 - Application for field approval; contents of application.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Application for field approval; contents of application. 18.94 Section 18.94 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS ELECTRIC MOTOR-DRIVEN MINE EQUIPMENT AND ACCESSORIES Field Approval of...

  3. 30 CFR 18.94 - Application for field approval; contents of application.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Application for field approval; contents of application. 18.94 Section 18.94 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS ELECTRIC MOTOR-DRIVEN MINE EQUIPMENT AND ACCESSORIES Field Approval of...

  4. Problem solving in magnetic field: Animation in mobile application

    NASA Astrophysics Data System (ADS)

    Najib, A. S. M.; Othman, A. P.; Ibarahim, Z.

    2014-09-01

    This paper is focused on the development of mobile application for smart phone, Android, tablet, iPhone, and iPad as a problem solving tool in magnetic field. Mobile application designs consist of animations that were created by using Flash8 software which could be imported and compiled to prezi.com software slide. The Prezi slide then had been duplicated in Power Point format and instead question bank with complete answer scheme was also additionally generated as a menu in the application. Results of the published mobile application can be viewed and downloaded at Infinite Monkey website or at Google Play Store from your gadgets. Statistics of the application from Google Play Developer Console shows the high impact of the application usage in all over the world.

  5. Nanotube field electron emission: principles, development, and applications.

    PubMed

    Li, Yunhan; Sun, Yonghai; Yeow, J T W

    2015-06-19

    There is a growing trend to apply field emission (FE) electron sources in vacuum electronic devices due to their fast response, high efficiency and low energy consumption compared to thermionic emission ones. Carbon nanotubes (CNTs) have been regarded as a promising class of electron field emitters since the 1990s and have promoted the development of FE technology greatly because of their high electrical and thermal conductivity, chemical stability, high aspect ratio and small size. Recent studies have shown that FE from CNTs has the potential to replace conventional thermionic emission in many areas and that it exhibits advanced features in practical applications. Consequently, FE from nanotubes and applications thereof have attracted much attention. This paper provides a comprehensive review of both recent advances in CNT field emitters and issues related to applications of CNT based FE. FE theories and principles are introduced, and the early development of field emitters is related. CNT emitter types and their FE performance are discussed. The current situation for applications based on nanotube FE is reviewed. Although challenges remain, the tremendous progress made in CNT FE over the past ten years indicates the field's development potential.

  6. Microwave noise field: active radiometry principles and applications

    NASA Astrophysics Data System (ADS)

    Polivka, Jiri

    2012-06-01

    Principles of Active Radiometry are presented. Noise radiators are used to generate the low-coherence microwave noise field, and radiometers to evaluate its intensity, polarization and coherence. Several types of noise radiators are described as well as radiometers and antennas. The following applications are introduced: Material evaluation where insertion loss and reflectivity of grainy, irregular and moving objects are preferable. Microwave Coherence Tomography allowing the depth irregularity to be detected in low-loss objects. Near-Field antenna testing, field coherence evaluation, and spatial combining of noise radiators.

  7. Compact infrared pinhole fisheye for wide field applications.

    PubMed

    Druart, Guillaume; Guérineau, Nicolas; Taboury, Jean; Rommeluère, Sylvain; Haïdar, Riad; Primot, Jérôme; Fendler, Manuel; Cigna, Jean-Charles

    2009-02-20

    The performances of a compact infrared optical system using advanced pinhole optics for wide field applications are given. This concept is adapted from the classical Tisse design in order to fit with infrared issues. Despite a low light gathering efficiency and a low resolution in comparison with classical lenses, pinhole imagery provides a long depth of field and a wide angular field of view. Moreover, by using a simple lens that compresses the field of view, the angular acceptance of this pinhole camera can be drastically widened to a value around 180°. This infrared compact system is named pinhole fisheye since it is based on the field lens of a classical fisheye system.

  8. Scalable parallel distance field construction for large-scale applications

    DOE PAGES

    Yu, Hongfeng; Xie, Jinrong; Ma, Kwan -Liu; Kolla, Hemanth; Chen, Jacqueline H.

    2015-10-01

    Computing distance fields is fundamental to many scientific and engineering applications. Distance fields can be used to direct analysis and reduce data. In this paper, we present a highly scalable method for computing 3D distance fields on massively parallel distributed-memory machines. Anew distributed spatial data structure, named parallel distance tree, is introduced to manage the level sets of data and facilitate surface tracking overtime, resulting in significantly reduced computation and communication costs for calculating the distance to the surface of interest from any spatial locations. Our method supports several data types and distance metrics from real-world applications. We demonstrate itsmore » efficiency and scalability on state-of-the-art supercomputers using both large-scale volume datasets and surface models. We also demonstrate in-situ distance field computation on dynamic turbulent flame surfaces for a petascale combustion simulation. In conclusion, our work greatly extends the usability of distance fields for demanding applications.« less

  9. Field emitter arrays for plasma and microwave source applications

    NASA Astrophysics Data System (ADS)

    Jensen, K. L.

    1999-05-01

    Field emitter arrays (FEAs) stand to strongly impact device performance when physical size, weight, power consumption, beam current, and/or high pulse repetition frequencies are an issue. FEAs are capable of instant ON/OFF performance, high brightness, high current density, large transconductance to capacitance ratio, and low voltage operation characteristics. Advanced microwave power tubes, and in particular, inductive output amplifiers, are by far the most technically challenging use to date. Other important uses include, e.g., electron sources for micropropulsion systems-Hall thrusters-and tethers for satellites, and (the most widely pursued application) field emission displays. The characteristics of field emitters that make them attractive to such applications shall be surveyed. A thorough analytical model of a field emitter array, beginning with a review of the nature of field emission and continuing with an analytical model of a single emitter and the operation of an array of emitters, shall be presented. In particular, attention shall be directed towards those features of FEAs that render them attractive as cold cathode candidates for electron beam generation. Tip characteristics, such as emission distribution, and array operation, such as space charge effects, will be analyzed in the context of the model. Finally, restricting attention to microwave applications, the performance of a tapered-helix inductive output amplifier to highlight the advantages of high frequency emission gating of the electron beam in a power tube shall be investigated.

  10. [Application of precision medicine in the field of surgery].

    PubMed

    Deng, Aiwen; Xiong, Ribo; Zeng, Canjun

    2015-11-01

    Precision medicine, based on personalized medicine, is to provide personalized and precise treatment. The emergence of 3D printing technique as well as genome sequencing provides an effective way to realize precise and personalized treatment. The application of 3D printing technique in the field of surgery is listed as following: optimize operation plan to achieve precise and personalized surgery; design personalized navigation template; personalized prosthesis production; design of personalized tissue and organ. With the development of tissue engineering, new material technology and genome sequencing and the improvement in related polices and regulations, precision medicine will step on a higher level in the field of surgery. This review introduces the application of precision medicine in the field of surgery.

  11. [Application of precision medicine in the field of surgery].

    PubMed

    Deng, Aiwen; Xiong, Ribo; Zeng, Canjun

    2015-11-01

    Precision medicine, based on personalized medicine, is to provide personalized and precise treatment. The emergence of 3D printing technique as well as genome sequencing provides an effective way to realize precise and personalized treatment. The application of 3D printing technique in the field of surgery is listed as following: optimize operation plan to achieve precise and personalized surgery; design personalized navigation template; personalized prosthesis production; design of personalized tissue and organ. With the development of tissue engineering, new material technology and genome sequencing and the improvement in related polices and regulations, precision medicine will step on a higher level in the field of surgery. This review introduces the application of precision medicine in the field of surgery. PMID:26607096

  12. Effects of Magnetic Field on Biological Cells and Applications

    NASA Astrophysics Data System (ADS)

    Chen, Ching-Jen

    2001-03-01

    While there has been extensive research performed in the physics of magnetic fields and the physics and chemistry in life sciences, independent of each other, there has been a paucity of scientific research and development investigating the possible applications of magnetic fields in life sciences. The focus of this presentation is to present the stimulation mechanism by which magnetic fields affect (a) yeast cells (b) plant cells and (c) mammalian normal and cancer cells. Recently we have found that the Saccharomyces Cerevsa yeast growth increases by about 30to a 1 tesla field and the production of CO2 increases by about 30of yeast metabolism may be due to an increase in intercellular interaction and protein channel alignment, the introduction of an alteration in the DNA from the magnetic field exposure or a combination of these mechanisms. We also have found that the application of high magnetic fields (1 tesla and above) can have marked effects on the germination and growth of plants, especially corn, beans and peas. This finding has opened up the possibility of technology developments in botanical growth systems to accelerate seed germination and crop harvesting. Most recently we have investigated the application of high magnetic fields on leukemia, CaCoII and HEP G2 cancer cell lines. We found that when leukemia are exposed to a 12 tesla field for 2 hours has an increase in cell death by about 30that were not exposed to the magnetic field. Viability of CaCoII cells sandwiched between permanent magnets of maximum strength of 1.2 tesla was measured. A decrease in viable cells by 33unexposed cells. HSP 70 was measured for HEPG2 cells that were exposed to permanent magnetic field of 1.2 tesla for 40 minutes and for unexposed cells. It was found that the exposed cells produce 19 times more HSP70 compared to unexposed cells. Our results together with other investigators report suggest a strong evidence of a reduction in the cell growth rate for cancer cells when

  13. An application for delivering field results to mobile devices

    NASA Astrophysics Data System (ADS)

    Kanta, A.; Hloupis, G.; Vallianatos, F.; Rust, D.

    2009-04-01

    Mobile devices (MD) such as personal digital assistants (PDAs) and Smartphones expand the ability of Internet communication between remote users. In particular these devices have the possibility to interact with data centres in order to request and receive information. For field surveys MDs used primarily for controlling instruments (in case of field measurements) or for entering data needed for later processing (e.g damage description after a natural hazard). It is not unusual in areas with high interest combined measurements took place. The results from these measurements usually stored in data servers and their publicity is driven mainly by web-based applications. Here we present a client / server application capable of displaying the results of several measurements for a specific area to a MD. More specific, we develop an application than can present to the screen of the MD the results of existing measurements according to the position of the user. The server side hosted at data centre and uses a relational data base (including the results), a SMS/MMS gateway and a receiver daemon application waiting for messages from MDs. The client side runs on MD and is a simple menu driven application which asks the user to enter the type of requested data and the geographical coordinates. In case of embedded GPS receiver, coordinates automatically derived from the receiver. Then a message is sent to server which responds with the results. In case of absence of Internet communication the application can switched to common Short/Multimedia Messaging Systems: the client request data using SMS and the server responds with MMS. We demonstrate the application using results from TEM, VES and HVSR measurements Acknowledgements Work of authors AK, GH and FV is partially supported by the EU-FP6-SSA in the frame of project "CYCLOPS: CYber-Infrastructure for CiviL protection Operative ProcedureS"

  14. Prospects for fusion applications of reversed-field pinches

    NASA Astrophysics Data System (ADS)

    Bathke, C. G.; Krakowski, R. A.; Hagenson, R. L.

    1985-11-01

    The applicability of the Reversed-Field Pinch (RFP) as a source of fusion neutrons for use in developing key fusion nuclear technologies is examined. This Fusion Test Facility (FTF) would emphasize high neutron wall loading, small plasma volume, low fusion and driver powers, and steady-state operation. Both parametric tradeoffs based on present-day physics understanding and a conceptual design based on an approx. 1-MW/m (neutron) driven operation are reported.

  15. [PCR-ELISA technology and its application in biomedical fields].

    PubMed

    Yan, Lin; Wang, Xiaoying; Guo, Yunchang

    2011-01-01

    Polymerase chain reaction-enzyme-linked immunosorbent assay (PCR- ELISA) technology is created by the use of the high sensitivity of PCR, nucleic acid probes of the specificity, microplate reader of objectivity; since its establishment, it has received wide attention. In this paper, a basic description of the technology was introduced, and the application of PCR-ELISA in biomedical field in recent years were reviewed.

  16. Advances toward field application of 3D hydraulic tomography

    NASA Astrophysics Data System (ADS)

    Cardiff, M. A.; Barrash, W.; Kitanidis, P. K.

    2011-12-01

    Hydraulic tomography (HT) is a technique that shows great potential for aquifer characterization and one that holds the promise of producing 3D hydraulic property distributions, given suitable equipment. First suggested over 15 years ago, HT assimilates distributed aquifer pressure (head) response data collected during a series of multiple pumping tests to produce estimates of aquifer property variability. Unlike traditional curve-matching analyses, which assume homogeneity or "effective" parameters within the radius of influence of a hydrologic test, HT analysis relies on numerical models with detailed heterogeneity in order to invert for the highly resolved 3D parameter distribution that jointly fits all data. Several numerical and laboratory investigations of characterization using HT have shown that property distributions can be accurately estimated between observation locations when experiments are correctly designed - a property not always shared by other, simpler 1D characterization approaches such as partially-penetrating slug tests. HT may represent one of the best methods available for obtaining detailed 3D aquifer property descriptions, especially in deep or "hard" aquifer materials, where direct-push methods may not be feasible. However, to date HT has not yet been widely adopted at contaminated field sites. We believe that current perceived impediments to HT adoption center around four key issues: 1) A paucity in the scientific literature of proven, cross-validated 3D field applications 2) A lack of guidelines and best practices for performing field 3D HT experiments; 3) Practical difficulty and time commitment associated with the installation of a large number of high-accuracy sampling locations, and the running of a large number of pumping tests; and 4) Computational difficulty associated with solving large-scale inverse problems for parameter identification. In this talk, we present current results in 3D HT research that addresses these four issues

  17. Overview of the GASP project; Field applications and economics

    SciTech Connect

    Sarshar, M.M.; Lovie, P.M. )

    1992-03-01

    This paper reports that the aim of the Goodfellow Assocs. subsea production (GASP) project was to develop a subsea production system for use in the development of marginal oil fields. The project was divided into three phases that culminated in testing a prototype system in a dry dock. The GASP system enables manifolding of products, separation of gas from produced liquids, and transportation of gas and liquids, and transportation of gas and liquids through separate lines. The produced liquids are pumped with a single-phase pumping system that is highly modularized for ease of installation and retrieval of key components. GASP is suitable for deepwater application and development of marginal fields far from the host platform. The economics were assessed with probabilistic methods to weigh the uncertainties. Developing marginal fields with the GASP system looks attractive, offering a development cost of $2.50 to $5.50 per barrel in many typical instances.

  18. Triaxial fiber optic magnetic field sensor for MRI applications

    NASA Astrophysics Data System (ADS)

    Filograno, Massimo L.; Pisco, Marco; Catalano, Angelo; Forte, Ernesto; Aiello, Marco; Soricelli, Andrea; Davino, Daniele; Visone, Ciro; Cutolo, Antonello; Cusano, Andrea

    2016-05-01

    In this paper, we report a fiber-optic triaxial magnetic field sensor, based on Fiber Bragg Gratings (FBGs) integrated with giant magnetostrictive material, the Terfenol-D. The realized sensor has been designed and engineered for Magnetic Resonance Imaging (MRI) applications. A full magneto-optical characterization of the triaxial sensing probe has been carried out, providing the complex relationship among the FBGs wavelength shift and the applied magnetostatic field vector. Finally, the developed fiber optic sensors have been arranged in a sensor network composed of 20 triaxial sensors for mapping the magnetic field distribution in a MRI-room at a diagnostic center in Naples (SDN), equipped with Positron emission tomography/magnetic resonance (PET/MR) instrumentation. Experimental results reveal that the proposed sensor network can be efficiently used in MRI centers for performing quality assurance tests, paving the way for novel integrated tools to measure the magnetic dose accumulated day by day by MRI operators.

  19. [Application of variable magnetic fields in medicine--15 years experience].

    PubMed

    Sieroń, Aleksander; Cieślar, Grzegorz

    2003-01-01

    The results of 15-year own experimental and clinical research on application of variable magnetic fields in medicine were presented. In experimental studies analgesic effect (related to endogenous opioid system and nitrogen oxide activity) and regenerative effect of variable magnetic fields with therapeutical parameters was observed. The influence of this fields on enzymatic and hormonal activity, free oxygen radicals, carbohydrates, protein and lipid metabolism, dielectric and rheological properties of blood as well as behavioural reactions and activity of central dopamine receptor in experimental animals was proved. In clinical studies high therapeutic efficacy of magnetotherapy and magnetostimulation in the treatment of osteoarthrosis, abnormal ossification, osteoporosis, nasosinusitis, multiple sclerosis, Parkinson's disease, spastic paresis, diabetic polyneuropathy and retinopathy, vegetative neurosis, peptic ulcers, colon irritable and trophic ulcers was confirmed. PMID:15049208

  20. An automated field phenotyping pipeline for application in grapevine research.

    PubMed

    Kicherer, Anna; Herzog, Katja; Pflanz, Michael; Wieland, Markus; Rüger, Philipp; Kecke, Steffen; Kuhlmann, Heiner; Töpfer, Reinhard

    2015-01-01

    Due to its perennial nature and size, the acquisition of phenotypic data in grapevine research is almost exclusively restricted to the field and done by visual estimation. This kind of evaluation procedure is limited by time, cost and the subjectivity of records. As a consequence, objectivity, automation and more precision of phenotypic data evaluation are needed to increase the number of samples, manage grapevine repositories, enable genetic research of new phenotypic traits and, therefore, increase the efficiency in plant research. In the present study, an automated field phenotyping pipeline was setup and applied in a plot of genetic resources. The application of the PHENObot allows image acquisition from at least 250 individual grapevines per hour directly in the field without user interaction. Data management is handled by a database (IMAGEdata). The automatic image analysis tool BIVcolor (Berries in Vineyards-color) permitted the collection of precise phenotypic data of two important fruit traits, berry size and color, within a large set of plants. The application of the PHENObot represents an automated tool for high-throughput sampling of image data in the field. The automated analysis of these images facilitates the generation of objective and precise phenotypic data on a larger scale. PMID:25730485

  1. An Automated Field Phenotyping Pipeline for Application in Grapevine Research

    PubMed Central

    Kicherer, Anna; Herzog, Katja; Pflanz, Michael; Wieland, Markus; Rüger, Philipp; Kecke, Steffen; Kuhlmann, Heiner; Töpfer, Reinhard

    2015-01-01

    Due to its perennial nature and size, the acquisition of phenotypic data in grapevine research is almost exclusively restricted to the field and done by visual estimation. This kind of evaluation procedure is limited by time, cost and the subjectivity of records. As a consequence, objectivity, automation and more precision of phenotypic data evaluation are needed to increase the number of samples, manage grapevine repositories, enable genetic research of new phenotypic traits and, therefore, increase the efficiency in plant research. In the present study, an automated field phenotyping pipeline was setup and applied in a plot of genetic resources. The application of the PHENObot allows image acquisition from at least 250 individual grapevines per hour directly in the field without user interaction. Data management is handled by a database (IMAGEdata). The automatic image analysis tool BIVcolor (Berries in Vineyards-color) permitted the collection of precise phenotypic data of two important fruit traits, berry size and color, within a large set of plants. The application of the PHENObot represents an automated tool for high-throughput sampling of image data in the field. The automated analysis of these images facilitates the generation of objective and precise phenotypic data on a larger scale. PMID:25730485

  2. Glyphosate applications on arable fields considerably coincide with migrating amphibians.

    PubMed

    Berger, Gert; Graef, Frieder; Pfeffer, Holger

    2013-01-01

    Glyphosate usage is increasing worldwide and the application schemes of this herbicide are currently changing. Amphibians migrating through arable fields may be harmed by Glyphosate applied to field crops. We investigated the population-based temporal coincidence of four amphibian species with Glyphosate from 2006 to 2008. Depending on a) age- and species-specific main migration periods, b) crop species, c) Glyphosate application mode for crops, and d) the presumed DT50 value (12 days or 47 days) of Glyphosate, we calculated up to 100% coincidence with Glyphosate. The amphibians regularly co-occur with pre-sowing/pre-emerging Glyphosate applications to maize in spring and with stubble management prior to crop sowing in late summer and autumn. Siccation treatment in summer coincides only with early pond-leaving juveniles. We suggest in-depth investigations of both acute and long-term effects of Glyphosate applications on amphibian populations not only focussed on exposure during aquatic periods but also terrestrial life stages.

  3. Enhancing resolution properties of array antennas via field extrapolation: application to MIMO systems

    NASA Astrophysics Data System (ADS)

    Reggiannini, Ruggero

    2015-12-01

    This paper is concerned with spatial properties of linear arrays of antennas spaced less than half wavelength. Possible applications are in multiple-input multiple-output (MIMO) wireless links for the purpose of increasing the spatial multiplexing gain in a scattering environment, as well as in other areas such as sonar and radar. With reference to a receiving array, we show that knowledge of the received field can be extrapolated beyond the actual array size by exploiting the finiteness of the interval of real directions from which the field components impinge on the array. This property permits to increase the performance of the array in terms of angular resolution. A simple signal processing technique is proposed allowing formation of a set of beams capable to cover uniformly the entire horizon with an angular resolution better than that achievable by a classical uniform-weighing half-wavelength-spaced linear array. Results are also applicable to active arrays. As the above approach leads to arrays operating in super-directive regime, we discuss all related critical aspects, such as sensitivity to external and internal noises and to array imperfections, and bandwidth, so as to identify the basic design criteria ensuring the array feasibility.

  4. General Multiobjective Force Field Optimization Framework, with Application to Reactive Force Fields for Silicon Carbide.

    PubMed

    Jaramillo-Botero, Andres; Naserifar, Saber; Goddard, William A

    2014-04-01

    First-principles-based force fields prepared from large quantum mechanical data sets are now the norm in predictive molecular dynamics simulations for complex chemical processes, as opposed to force fields fitted solely from phenomenological data. In principle, the former allow improved accuracy and transferability over a wider range of molecular compositions, interactions, and environmental conditions unexplored by experiments. That is, assuming they have been optimally prepared from a diverse training set. The trade-off has been force field engines that are functionally complex, with a large number of nonbonded and bonded analytical forms that give rise to rather large parameter search spaces. To address this problem, we have developed GARFfield (genetic algorithm-based reactive force field optimizer method), a hybrid multiobjective Pareto-optimal parameter development scheme based on genetic algorithms, hill-climbing routines and conjugate-gradient minimization. To demonstrate the capabilities of GARFfield we use it to develop two very different force fields: (1) the ReaxFF reactive force field for modeling the adiabatic reactive dynamics of silicon carbide growth from an methyltrichlorosilane precursor and (2) the SiC electron force field with effective core pseudopotentials for modeling nonadiabatic dynamic phenomena with highly excited electronic states. The flexible and open architecture of GARFfield enables efficient and fast parallel optimization of parameters from quantum mechanical data sets for demanding applications like ReaxFF, electronic fast forward (or electron force field), and others including atomistic reactive charge-optimized many-body interatomic potentials, Morse, and coarse-grain force fields.

  5. General Multiobjective Force Field Optimization Framework, with Application to Reactive Force Fields for Silicon Carbide.

    PubMed

    Jaramillo-Botero, Andres; Naserifar, Saber; Goddard, William A

    2014-04-01

    First-principles-based force fields prepared from large quantum mechanical data sets are now the norm in predictive molecular dynamics simulations for complex chemical processes, as opposed to force fields fitted solely from phenomenological data. In principle, the former allow improved accuracy and transferability over a wider range of molecular compositions, interactions, and environmental conditions unexplored by experiments. That is, assuming they have been optimally prepared from a diverse training set. The trade-off has been force field engines that are functionally complex, with a large number of nonbonded and bonded analytical forms that give rise to rather large parameter search spaces. To address this problem, we have developed GARFfield (genetic algorithm-based reactive force field optimizer method), a hybrid multiobjective Pareto-optimal parameter development scheme based on genetic algorithms, hill-climbing routines and conjugate-gradient minimization. To demonstrate the capabilities of GARFfield we use it to develop two very different force fields: (1) the ReaxFF reactive force field for modeling the adiabatic reactive dynamics of silicon carbide growth from an methyltrichlorosilane precursor and (2) the SiC electron force field with effective core pseudopotentials for modeling nonadiabatic dynamic phenomena with highly excited electronic states. The flexible and open architecture of GARFfield enables efficient and fast parallel optimization of parameters from quantum mechanical data sets for demanding applications like ReaxFF, electronic fast forward (or electron force field), and others including atomistic reactive charge-optimized many-body interatomic potentials, Morse, and coarse-grain force fields. PMID:26580361

  6. Near-field fiber optic chemical sensors and biological applications

    NASA Astrophysics Data System (ADS)

    Tan, Weihong; Shi, Zhong-You; Thorsrud, Bjorn A.; Harris, C.; Kopelman, Raoul

    1994-03-01

    Near-field optics has been applied in the nanofabrication of subwavelength optical fiber chemical and biological sensors and their operation in chemical and biological analysis. A thousandfold miniaturization of immobilized optical fiber sensors has been achieved by a near- field photo-nanofabrication technique, which is based on nanofabricated optical fiber tips and near-field photopolymerization. This technique has been further developed by multistep near- field nanofabrication and multidye probe fabrication. Multistep nanofabrication can further miniaturize optical fiber sensors, while multidye fabrication results in multifunctional optic and excitonic probes with extremely small size. These probes emit multiwavelength photons or produce excitons of different energy levels, and may have multiple chemical or biological sensitivities. The nondestructive submicrometer sensor has demonstrated its ability to carry out static and dynamic determinations of pH in intact rat conceptuses of varying gestational ages. The ability of the sensors to measure pH changes, in real time, in the intact rat conceptus, demonstrates their potential applications for dynamic analysis in multicellular organisms and single cells. The near-field interaction of photons with matter is discussed.

  7. Particle Production under External Fields and Its Applications

    SciTech Connect

    Yoo, Hojin

    2014-01-01

    The thesis presents studies of vacuum pair productions and its applications in early universe cosmology and high energy astrophysics. Vacuum often becomes unstable and spontaneously decays into pairs of particles in rapidly expanding universes or under strong external electromagnetic fields. Theoretically, spontaneous pair productions due to such non-trivial backgrounds of spacetimes or electromagnetic fields are well-understood. However, the effect of particle productions has not been observed so far because of experiemtal difficulties in obtaining large curvatures of space-times or strong electric fields. Although it may be impossible to observe the pair productions directly via laboratory experiments, there are still powerful sources of space-time curvatures or electric fields in cosmology and astrophysics, which result in observations. In Part I, we explore the inflationary models in early universe utilizing pair productions through gravity. We study observable signatures on the cosmic microwave background, such as isocurvature perturbations and non-Gaussianities, generated from the particle production of WIMPzillas and axions during or after inflation. In Part II, we investigate the electron-positron pair production in the magnetosphere of pulsars whose electromagnetic fields are expected to close to or even greater than the pair production threshold. In particular, we demonstrate that the pair production may be responsible for giant pulses from the Crab pulsar.

  8. EGIS - An Environmental GIS Developed for NASA Field Center Applications

    NASA Technical Reports Server (NTRS)

    Smoot, James; Cohan, Tyrus; O'Connor, Christina; Johnson, Gary; Carr, Hugh

    2001-01-01

    As the principal center for Environmental Geographic Information Systems (EGIS), the John C. Stennis Space Center (SSC), located in Hancock County, Mississippi, has been assigned technical support requirements to design and to implement a basic EGIS data base for all NASA Field Centers. The intent of this Phase I effort is to produce a baseline EGIS data base incorporating newly available remotely sensed data as well as existing environmental data. A example application of the use of the data base at Stennis Space Center will be to illustrate baseline environmental conditions for consideration with proposed propulsion test stand development and operation. To effectively answer questions related to environmental issues at each center, organization of the data layers and sources will include the following categories: Cadastral/Geodetic; Geopolitical; Hydrography; Infrastructure; Physical Geography; Socioeconomic; Remote Sensing Imagery; Associated Metadata. As part of a Phase II effort, site-specific data and applications will be implemented and added to the data base at each Field Center. This poster illustrates the framework of the design and implementation of a basic EGIS data base. Shown are example data sources, hardware and software, and data base delivery and installation. The poster also depicts future recommendations for a centrally located server to house each of the NASA Field Center data bases. The server will allow real-time data base updates with additional layers and models for each center. Expansion of the EGIS data base will continue to grow as site-specific applications are developed addressing the ongoing evolution of environmental concerns at all NASA Field Centers.

  9. Security applications of a remote electric-field sensor technology

    NASA Astrophysics Data System (ADS)

    Prance, Robert J.; Harland, Christopher J.; Prance, Helen

    2008-10-01

    A new generation of electric field sensors developed at the University of Sussex is enabling an alternative to contact voltage and non-contact magnetic field measurements. We have demonstrated the capability of this technology in a number of areas including ECG through clothing, remote off-body ECG, through wall movement sensing and electric field imaging. Clearly, there are many applications for a generic sensor technology with this capability, including long term vital sign monitoring. The non-invasive nature of the measurement also makes these sensors ideal for man/machine and human/robot interfacing. In addition, there are obvious security and biometric possibilities since we can obtain physiological data remotely, without the knowledge of the subject. This is a clear advantage if such systems are to be used for evaluating the psychological state of a subject. In this paper we report the results obtained with a new version of the sensor which is capable of acquiring electrophysiological signals remotely in an open unshielded laboratory. We believe that this technology opens up a new area of remote biometrics which could have considerable implications for security applications. We have also demonstrated the ability of EPS to function in closely-packed one and two dimensional arrays for real-time imaging.

  10. Near field magnetic communications for helmet-mounted display applications

    NASA Astrophysics Data System (ADS)

    Field, Mark; Sailer, Alan

    2005-05-01

    Helmet-mounted displays need a data feed that is typically provided by a cable or RF wireless data link to an external computer. In defense applications these solutions are problematic: a cable gets in the way and restricts use and emergency egress, while an RF wireless link can be detected at some distance giving away position and is susceptible to jamming. What is required is an alternative wireless technology that is low power, extremely localized and difficult to detect or jam. Near field magnetic communications is one possible alternative to RF communications that may fulfill these needs. This technology uses a time varying magnetic field to carry information, and is only useable over small distances of order six feet. This is expected to have significant advantages for particular applications: notably power requirements and security compared with RF wireless links. The power stored in a magnetic field falls off as 1/r6, compared with 1/r2 for RF, which means that all the power is localized around the transmitter. By having a physically small communications region around each platform or user, a large bandwidth can be guaranteed by allowing the reuse of the frequency spectrum outside the immediate vicinity. It also confers security on the data-link, as the signal is undetectable beyond the short range of the system.

  11. Application research on microchannel plate in new fields

    NASA Astrophysics Data System (ADS)

    Li, Yanhong; Chen, Xiaomei; Ni, Guoqiang

    2015-08-01

    Microchannel plate (MCP) is a photoelectron multiplier as the core component of low-level light (LLL) image intensifier. MCP has two-dimensional space, time, and energy resolution, fast response time, low background noise, wide dynamic range and high gain characteristics, as well as electrons, ions, UV and soft X-ray photon detection capability directly. In recent years, with the publication of foreign advanced technology and Chinese research staff in-depth understanding of MCP's unique characteristics, the applications of MCP have extended into many new fields accordingly in China. In addition to the image intensifier, the MCP can be used in deep space exploration and scientific experiments, detecting kinds of trace rays and particles, such as pulsars navigation, nuclear simulation diagnostics, UV, EUV, neutron, neutrino detection and imaging. North Night Vision Technology Co. Ltd (NVT) as the only unit possessing MCP production capacity in China is constantly working on improving, innovation and application research on MCP technology. In this paper, based on the researches on MCP in some new fields the NVT Company has undertaken and ongoing, the technological breakthroughs and application research progresses achieved are described.

  12. The actual goals of geoethics

    NASA Astrophysics Data System (ADS)

    Nemec, Vaclav

    2014-05-01

    The most actual goals of geoethics have been formulated as results of the International Conference on Geoethics (October 2013) held at the geoethics birth-place Pribram (Czech Republic): In the sphere of education and public enlightenment an appropriate needed minimum know how of Earth sciences should be intensively promoted together with cultivating ethical way of thinking and acting for the sustainable well-being of the society. The actual activities of the Intergovernmental Panel of Climate Changes are not sustainable with the existing knowledge of the Earth sciences (as presented in the results of the 33rd and 34th International Geological Congresses). This knowledge should be incorporated into any further work of the IPCC. In the sphere of legislation in a large international co-operation following steps are needed: - to re-formulate the term of a "false alarm" and its legal consequences, - to demand very consequently the needed evaluation of existing risks, - to solve problems of rights of individuals and minorities in cases of the optimum use of mineral resources and of the optimum protection of the local population against emergency dangers and disasters; common good (well-being) must be considered as the priority when solving ethical dilemmas. The precaution principle should be applied in any decision making process. Earth scientists presenting their expert opinions are not exempted from civil, administrative or even criminal liabilities. Details must be established by national law and jurisprudence. The well known case of the L'Aquila earthquake (2009) should serve as a serious warning because of the proven misuse of geoethics for protecting top Italian seismologists responsible and sentenced for their inadequate superficial behaviour causing lot of human victims. Another recent scandal with the Himalayan fossil fraud will be also documented. A support is needed for any effort to analyze and to disclose the problems of the deformation of the contemporary

  13. Land Application Training Center - A Field Based Classroom

    NASA Astrophysics Data System (ADS)

    Godfrey, Jonathan; Lindbo, David L.; McLaughlin, Rich

    2015-04-01

    More and more professionals have to be licensed or certified to perform activities related to soil and the environment. Many certification programs have been solely based on classroom instruction with no field experience. We saw this as a gap in training that could lead to problems with implementation and job performance. As a result we developed a field based training center to assist with both certification training and continuing education of environmental professionals. The center broke ground in 1997 and has expanded over the years to include soils and waste application, wetland restoration, and sediment and erosion control demonstrations. This presentation describes the individual components and outlines the courses offered at the training center.

  14. Process Orchestration With Modular Software Applications On Intelligent Field Devices

    NASA Astrophysics Data System (ADS)

    Orfgen, Marius; Schmitt, Mathias

    2015-07-01

    The method developed by the DFKI-IFS for extending the functionality of intelligent field devices through the use of reloadable software applications (so-called Apps) is to be further augmented with a methodology and communication concept for process orchestration. The concept allows individual Apps from different manufacturers to decentrally share information. This way of communicating forms the basis for the dynamic orchestration of Apps to complete processes, in that it allows the actions of one App (e.g. detecting a component part with a sensor App) to trigger reactions in other Apps (e.g. triggering the processing of that component part). A holistic methodology and its implementation as a configuration tool allows one to model the information flow between Apps, as well as automatically introduce it into physical production hardware via available interfaces provided by the Field Device Middleware. Consequently, configuring industrial facilities is made simpler, resulting in shorter changeover and shutdown times.

  15. [The concept of field cancerization and its clinical application].

    PubMed

    Wei, Z H; Gong, W; Zhou, M; Chen, Q M

    2016-09-01

    Head and neck squamous cell carcinoma(HNSCC) is among the most common malignances worldwide. Patients with HNSCC often develop primary tumors at multiple sites and have tendency for local recurrences following curative resectional surgery. Field cancerization theory presumes that, after repeated carcinogenic exposures, the entire superficialepitheliium of the upper aerodigestive tract has an increased risk for developing (pre)malignant lesions because of multiple genetic abnormalities. This theorywell explains the strong potential with malignant transformation and loco-regional recurrence in HNSCC, and helps to better understand the pathogenesis, and thus provides a new idea for prevention and treatment of this disease. This paper will give an overview of field cancerization, including the concept and its clinical application. PMID:27596348

  16. Application of medical gases in the field of neurobiology

    PubMed Central

    2011-01-01

    Medical gases are pharmaceutical molecules which offer solutions to a wide array of medical needs. This can range from use in burn and stroke victims to hypoxia therapy in children. More specifically however, gases such as oxygen, helium, xenon, and hydrogen have recently come under increased exploration for their potential theraputic use with various brain disease states including hypoxia-ischemia, cerebral hemorrhages, and traumatic brain injuries. As a result, this article will review the various advances in medical gas research and discuss the potential therapeutic applications and mechanisms with regards to the field of neurobiology. PMID:22146102

  17. Application of Phase Field Simulations to Fuel Behavior

    SciTech Connect

    Radhakrishnan, Balasubramaniam; Gorti, Sarma B; Clarno, Kevin T

    2015-01-01

    The application of the phase filed method to simulate the formation and the stress induced re-orientation of zirconium hydride during dry storage of the spent fuel and clad assembly is discussed. The phase field technique is able to capture qualitatively the effect of external stress on the hydride orientation in Zr-H system. However, the modeling effort to-date is far from adequate and several issues remain to be addressed before the simulations can be used as a predictive tool for the behavior of the clad during long time dry storage.

  18. State waste discharge permit application, 200-E chemical drain field

    SciTech Connect

    Not Available

    1994-06-01

    As part of the Hanford Federal Facility Agreement and Consent Order negotiations (Ecology et al. 1994), the US Department of Energy, Richland Operations Office, the US Environmental Protection Agency, and the Washington State Department of Ecology agreed that liquid effluent discharges to the ground on the Hanford Site which affect groundwater or have the potential to affect ground would be subject to permitting under the structure of Chapter 173-216 (or 173-218 where applicable) of the Washington Administrative Code, the State Waste Discharge Permit Program. As a result of this decision, the Washington State Department of Ecology and the US Department of Energy, Richland Operations Office entered into Consent Order No. DE 91NM-177, (Ecology and DOE-RL 1991). The Consent Order No. DE 91NM-177 requires a series of permitting activities for liquid effluent discharges. This document presents the State Waste Discharge Permit (SWDP) application for the 200-E Chemical Drain Field. Waste water from the 272-E Building enters the process sewer line directly through a floor drain, while waste water from the 2703-E Building is collected in two floor drains, (north and south) that act as sumps and are discharged periodically. The 272-E and 2703-E Buildings constitute the only discharges to the process sewer line and the 200-E Chemical Drain Field.

  19. 30 CFR 203.63 - Does my application have to include all leases in the field?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... and Expansion Projects § 203.63 Does my application have to include all leases in the field? (a) For... project or an expansion project, your application does not have to include all leases in the field....

  20. Magnetic nanoparticles for applications in oscillating magnetic field

    SciTech Connect

    Peeraphatdit, Chorthip

    2009-01-01

    Enzymatic and thermochemical catalysis are both important industrial processes. However, the thermal requirements for each process often render them mutually exclusive: thermochemical catalysis requires high temperature that denatures enzymes. One of the long-term goals of this project is to design a thermocatalytic system that could be used with enzymatic systems in situ to catalyze reaction sequences in one pot; this system would be useful for numerous applications e.g. conversion of biomass to biofuel and other commodity products. The desired thermocatalytic system would need to supply enough thermal energy to catalyze thermochemical reactions, while keeping the enzymes from high temperature denaturation. Magnetic nanoparticles are known to generate heat in an oscillating magnetic field through mechanisms including hysteresis and relaxational losses. We envisioned using these magnetic nanoparticles as the local heat source embedded in sub-micron size mesoporous support to spatially separate the particles from the enzymes. In this study, we set out to find the magnetic materials and instrumental conditions that are sufficient for this purpose. Magnetite was chosen as the first model magnetic material in this study because of its high magnetization values, synthetic control over particle size, shape, functionalization and proven biocompatibility. Our experimental designs were guided by a series of theoretical calculations, which provided clues to the effects of particle size, size distribution, magnetic field, frequency and reaction medium. Materials of theoretically optimal size were synthesized, functionalized, and their effects in the oscillating magnetic field were subsequently investigated. Under our conditions, the materials that clustered e.g. silica-coated and PNIPAM-coated iron oxides exhibited the highest heat generation, while iron oxides embedded in MSNs and mesoporous iron oxides exhibited the least bulk heating. It is worth noting that the specific

  1. Linguistic Theory and Actual Language.

    ERIC Educational Resources Information Center

    Segerdahl, Par

    1995-01-01

    Examines Noam Chomsky's (1957) discussion of "grammaticalness" and the role of linguistics in the "correct" way of speaking and writing. It is argued that the concern of linguistics with the tools of grammar has resulted in confusion, with the tools becoming mixed up with the actual language, thereby becoming the central element in a metaphysical…

  2. El Observatorio Gemini - Status actual

    NASA Astrophysics Data System (ADS)

    Levato, H.

    Se hace una breve descripción de la situación actual del Observatorio Gemini y de las últimas decisiones del Board para incrementar la eficiencia operativa. Se hace también una breve referencia al uso argentino del observatorio.

  3. Ac losses for the self field of an ac transport current with a dc transport current offset in high {Tc} superconducting magnet coils for MagLev application

    SciTech Connect

    Koosh, V.F.

    1993-10-01

    Although much research has been conducted concerning the losses of high-{Tc} superconductors, very little has concentrated on the self-field losses in an actual magnet arrangement. The coils studied in this work were designed for use as actual magnets in an industrial application. Self field loss measurements were made upon tape-wound 2223 superconducting helix coils. The self-field losses were produced by an AC transport current with a DC transport current offset. Losses were taken for single, double and triple tape windings, giving essentially monofilament, dual, and three filament cases. The losses measured here were varied over a range of AC current values for several different DC values, and over a range of frequencies. The currents were all AC sinusoids with a DC offset. All measurements were made at T = 77K.

  4. Vertical magnetic field and its analytic signal applicability in oil field underground pipeline detection

    NASA Astrophysics Data System (ADS)

    Guo, Zhiyong; Liu, Dejun; Pan, Qi; Zhang, Yingying; Li, Yi; Wang, Zheng

    2015-06-01

    We propose using the vertical component of the magnetic anomaly (vertical magnetic field (VMF)) and its analytic signal (AS) to detect oil field underground pipelines. The connection between two peaks of the VMF curves or the AS curves was used to calculate the pipeline azimuth, and the peak coordinates of the AS were used to determine the horizontal position of pipelines. Then, the effect of the pipeline magnetization direction and pipeline buried depth on the horizontal locating error was analyzed. Three typical pipeline models were used for verifying this method. Results indicate that this method can be used to precisely calculate the stretch direction of the pipeline and effectively improve the identification capability in detecting parallel pipelines. The horizontal position of the pipeline axis can be accurately located by the peak of the AS and the locating error increases with the increase in pipeline buried depth, but it is not affected by pipeline outer diameter, thickness, susceptibility. The instrument design and the VMF measurement strategy are realistic and applicable. The VMF detection with its AS provides a new effective method for horizontal locating and direction calculating of oil field underground pipelines.

  5. 24 CFR 200.96 - Certificates of actual cost.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... Endorsement Generally Applicable to Multifamily and Health Care Facility Mortgage Insurance Programs; and Continuing Eligibility Requirements for Existing Projects Cost Certification § 200.96 Certificates of actual... 24 Housing and Urban Development 2 2013-04-01 2013-04-01 false Certificates of actual cost....

  6. 24 CFR 200.96 - Certificates of actual cost.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... Endorsement Generally Applicable to Multifamily and Health Care Facility Mortgage Insurance Programs; and Continuing Eligibility Requirements for Existing Projects Cost Certification § 200.96 Certificates of actual... 24 Housing and Urban Development 2 2011-04-01 2011-04-01 false Certificates of actual cost....

  7. 24 CFR 200.96 - Certificates of actual cost.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... Endorsement Generally Applicable to Multifamily and Health Care Facility Mortgage Insurance Programs; and Continuing Eligibility Requirements for Existing Projects Cost Certification § 200.96 Certificates of actual... 24 Housing and Urban Development 2 2014-04-01 2014-04-01 false Certificates of actual cost....

  8. 24 CFR 200.96 - Certificates of actual cost.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... Endorsement Generally Applicable to Multifamily and Health Care Facility Mortgage Insurance Programs; and Continuing Eligibility Requirements for Existing Projects Cost Certification § 200.96 Certificates of actual... 24 Housing and Urban Development 2 2012-04-01 2012-04-01 false Certificates of actual cost....

  9. 24 CFR 200.96 - Certificates of actual cost.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... Endorsement Generally Applicable to Multifamily and Health Care Facility Mortgage Insurance Programs; and Continuing Eligibility Requirements for Existing Projects Cost Certification § 200.96 Certificates of actual... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Certificates of actual cost....

  10. [Dynamic simulation of nitrogen application level effects on rice yield and optimization analysis of fertilizer supply in paddy field].

    PubMed

    Yang, Jingping; Jiang, Ning; Chen, Jie

    2003-10-01

    Field and water tank plot experiments were conducted in Zhejiang Province in 1999 to determine the effects of nitrogen application amount and times on rice growth and yield, and rice growth simulation model ORYZA-0 and nitrogen management module were used to establish a modified nitrogen effect-rice growth model. The simulated results presented a higher positive relationship with the measured results. According to the simulated and measured results, 160 kg.hm-2 was the economic nitrogen application amount for two rice varieties production, and the nitrogen application strategies were: 1) < 100 kg.hm-2 nitrogen fertilizer should be applied within 35 days after transplanting; 2) when the nitrogen application level was between 100-200 kg.hm-2, it should be applied within 45 days after transplanting; 3) if the nitrogen application amount exceeded 200 kg.hm-2, it should be put into paddy field within 60 days after transplanting; 4) as the nitrogen application amount increased, the nitrogen supply at the later rice growth stage should be increased. As for the second cropping rice, the more times the nitrogen applied in the field, the more closeness the rice yield reached the APCUM curve(optimized nitrogen curve) suggested. But in real rice production, it is impossible for farmers to adopt more times of N applying, since labor and cost will increase. Based on the experimental parameters and real rice production situation, the reasonable nitrogen application under 160 kg.hm-2 levels for high yielding second cropping rice was split into 4 times with fraction 0.2:0.3:0.3:0.2 at 5, 20, 30, 40 days after transplanting. The rice yield could reach 5,916 kg.hm-2, resulted in a 3.12% increase as compared with the yield under actual fertilizer application amount and timing.

  11. Bi-2212 round wire development for high field applications

    NASA Astrophysics Data System (ADS)

    Miao, H.; Huang, Y.; Hong, S.; Gerace, M.; Parrell, J.

    2014-05-01

    Oxford Superconducting Technology (OST) has been continuously improving Bi-2212 round wire performance because of its potential for application in high-field magnets (> 25 T). We focused on Bi-2212 wire configuration design, filament densification and reducing carbon and hydrogen contamination to improve the engineering critical current density (JE). Several wire configurations have been developed to meet different wire diameter and operating current requirements. The swaging, cold isostatic pressing (CIP) and over-pressure heat treatment processes have been demonstrated to effectively increase Bi-2212 filament mass density in the final wire and result in high performance over long length. The JE values exceeding 550 A/mm2 at 4.2 K, 15 T have been achieved on the CIPed 1 m long sample using a 10 bar over-pressure (OP) heat treatment. The twisted Bi-2212 wire significantly reduced ac loss without the critical current degradation.

  12. Bragg-Fresnel optics: New field of applications

    SciTech Connect

    Snigirev, A.

    1997-02-01

    Bragg-Fresnel Optics shows excellent compatibility with the third generation synchrotron radiation sources such as ESRF and is capable of obtaining monochromatic submicron focal spots with 10{sup 8}-10{sup 9} photons/sec in an energy bandwidth of 10{sup -4}-10{sup -6} and in a photon energy range between 2-100 keV. New types of Bragg-Fresnel lenses like modified, ion implanted, bent and acoustically modulated were tested. Microprobe techniques like microdiffraction and microfluorescence based on Bragg-Fresnel optics were realised at the ESRF beamlines. Excellent parameters of the X-ray beam at the ESRF in terms of low emittance and quite small angular source size allow for Bragg-Fresnel optics to occupy new fields of applications such as high resolution diffraction, holography, interferometry and phase contrast imaging.

  13. Numerical modeling for an electric-field hyperthermia applicator

    NASA Technical Reports Server (NTRS)

    Wu, Te-Kao; Chou, C. K.; Chan, K. W.; Mcdougall, J.

    1993-01-01

    Hyperthermia, in conjunction with radiation and chemotherapy for treatment of cancers, is an area of current concern. Experiments have shown that hyperthermia can increase the potency of many chemotherapy drugs and the effectiveness of radiation for treating cancer. A combination of whole body or regional hyperthermia with chemotherapy or radiation should improve treatment results. Conventional methods for inducing whole body hyperthermia, such as exposing a patient in a radiant cabinet or under a hot water blanket, conduct heat very slowly from the skin to the body core. Thus a more efficient system, such as the three-plate electric-field hyperthermia applicator (EHA), is developed. This three-plate EHA has one top plate over and two lower plates beneath the patient. It is driven at 27.12 MHz with 500 Watts through a matching circuit. Using this applicator, a 50 kg pig was successfully heated to 42 C within 45 minutes. However, phantom and animal studies have indicated non-uniform heating near the side of the body. In addition, changes in the size and distance between the electrode plates can affect the heating (or electromagnetic field) pattern. Therefore, numerical models using the method of moments (MOM) or the finite difference time domain (FDTD) technique are developed to optimize the heating pattern of this EHA before it is used for human trials. The accuracy of the numerical modeling has been achieved by the good agreement between the MOM and FDTD results for the three-plate EHA without a biological body. The versatile FDTD technique is then applied to optimize the EHA design with a human body. Both the numerical and measured data in phantom blocks will be presented. The results of this study will be used to design an optimized system for whole body or regional hyperthermia.

  14. Waveguide evanescent field fluorescence microscopy & its application in cell biology

    NASA Astrophysics Data System (ADS)

    Hassanzadeh, Abdollah

    There are many powerful microscopy technologies available for the investigation of bulk materials as well as for thin film samples. Nevertheless, for imaging an interface, especially live cells on a substrate and ultra thin-films, only Total Internal Reflection Fluorescence (TIRF) microscopy is available. This TIRF microscopy allows imaging without interference of the bulk. Various approaches are employed in fluorescence microscopy applications to restrict the excitation and detection of fluorophores to a thin region of the specimen. Elimination of background fluorescence from outside the focal plane can dramatically improve the signal-to-noise ratio, and consequently, the spatial resolution of the features or events of interest. TIRF microscopy is an evanescent field based microscopy. In this method, fluorescent dyes are only excited within an evanescent field: roughly within 100 nm above a glass coverslip. This will allow imaging surface and interfacial issues of the glass coverslip and an adjacent material. Waveguide evanescent field fluorescence (WEFF) microscopy is a new development for imaging cell-substrate interactions in real time and in vitro. It is an alternative to TIRF microscopy. In this method the light is coupled into a waveguide via an optical grating. The coupled light propagates as a waveguide mode and exhibits an evanescent field on top of the waveguide. This can be used as a surface-bound illumination source to excite fluorophores. This evanescent field serves as an extremely powerful tool for quality control of thin films, to study cell-substrate contacts, and investigating the effect of external agents and drugs on the cell-substrate interaction in real time and in vitro. This new method has been established and optimized to minimize non-uniformity, scattering and photo bleaching issues. Visualizing and quantifying of the cell-substrates and solid thin films have been carried out by WEFF microscopy. The images of the cell-substrate interface

  15. Development of high temperature superconductors for magnetic field applications

    SciTech Connect

    Larbalestier, D.C.

    1991-12-31

    The key requirement for magnetic field applications of high temperature superconductor (HTS) materials is to have conductors with high transport critical current density available for magnet builders. After 3 or 4 years of being without any such object, conductor makers have had recent success in producing simple conductor prototypes. These have permitted the construction of simple HTS magnets having self fields exceeding 1 tesla at 4K. Thus the scientific feasibility of making powerful HTS magnets has been demonstrated. Attention to the technological aspects of making HTS conductors for magnets with strong flux pinning and reduced superconducting granularity is now sensible and attractive. However, extrinsic defects such as filament sausaging, cracking, misaligned grains and other perturbation to long range current flow must be controlled at a low level if the benefit of intrinsic improvements to the critical current density is to be maintained in the conductor form. Due to the great complexity of the HTS materials, there is sometimes confusion as to whether a given sample has an intrinsically or extrinsically limited critical current density. Systematic microstructure variation experiments and resistive transition analysis are shown to be particularly helpful in this phase of conductor development.

  16. Development of high temperature superconductors for magnetic field applications

    SciTech Connect

    Larbalestier, D.C.

    1991-01-01

    The key requirement for magnetic field applications of high temperature superconductor (HTS) materials is to have conductors with high transport critical current density available for magnet builders. After 3 or 4 years of being without any such object, conductor makers have had recent success in producing simple conductor prototypes. These have permitted the construction of simple HTS magnets having self fields exceeding 1 tesla at 4K. Thus the scientific feasibility of making powerful HTS magnets has been demonstrated. Attention to the technological aspects of making HTS conductors for magnets with strong flux pinning and reduced superconducting granularity is now sensible and attractive. However, extrinsic defects such as filament sausaging, cracking, misaligned grains and other perturbation to long range current flow must be controlled at a low level if the benefit of intrinsic improvements to the critical current density is to be maintained in the conductor form. Due to the great complexity of the HTS materials, there is sometimes confusion as to whether a given sample has an intrinsically or extrinsically limited critical current density. Systematic microstructure variation experiments and resistive transition analysis are shown to be particularly helpful in this phase of conductor development.

  17. Field trial of a Doppler sonar system for fisheries applications

    NASA Astrophysics Data System (ADS)

    Tollefsen, Cristina D. S.; Zedel, Len

    2003-10-01

    Various deployments of commercial Doppler current profiling systems have demonstrated that these instruments can detect fish and measure their swimming speeds. However, research into the possible application of Doppler sonar to fisheries problems is limited and has not taken advantage of coherent signal processing schemes. A field trial was undertaken in August 2002 to explore the capabilities of a coherent Doppler sonar when applied to detecting discrete targets. The passage of migrating salmon on the Fraser River in British Columbia provided an ideal test opportunity with fish of well-defined swimming behavior and allowed for comparisons with conventional fisheries acoustics techniques. The instrument tested was a 250-kHz sonar which provided for phase coding of transmit pulses and coherent sampling of successive acoustic returns. The field trial resulted in 11 consecutive days of Doppler sonar data acquired during the peak of the sockeye salmon (Oncorhynchus nerka) migration. A total of 7425 individual fish were identified and their swimming speed was measured with an accuracy of between 10 cms-1 and 20 cms-1, which depended on pulse length, pulse spacing, and target range. By comparison, water velocity measurements made with the same instrument can only achieve a theoretical accuracy of 60 cms-1.

  18. Frac-and-pack stimulation: Application, design, and field experience

    SciTech Connect

    Roodhart, L.P.; Fokker, P.A.; Davies, D.R.; Shlyapobersky, J.; Wong, G.K.

    1994-03-01

    This paper discusses the criteria for selecting wells to be frac-and-packed. The authors show how systematic study of the inflow performance can be used to assess the potential of frac-and-packed wells, to identify the controlling factors, and to optimize design parameters. They also show that fracture conductivity is often the key to successful treatment. This conductivity depends largely on proppant size; formation permeability damage around the created fracture has less effect. Appropriate allowance needs to be made for flow restrictions caused by the presence of the perforations, partial penetration, and non-Darcy effects. They describe the application of the overpressure-calibrated hydraulic fracture model in frac-and-pack treatment design, and discuss some operational considerations with reference to field examples. The full potential of this promising new completion method can be achieved only if the design is tailored to the individual well. This demands high-quality input data, which can be obtained only from a calibration test. This paper presents their strategy for frac-and-pack design, drawing on examples from field experience. They also point out several areas that the industry needs to address, such as the sizing of proppant in soft formations and the interaction between fracturing fluids and resin in resin-coated proppant.

  19. Strategies for field application of foams in heavy oil reservoirs

    SciTech Connect

    Isaacs, E.E.; Ivory, J.; Law, D.H.S.

    1995-12-31

    Steam-based processes in heavy oil reservoirs that are not stabilized by gravity have poor vertical and areal conformance. This is because gases are more mobile within the pore space than liquids and steam tends to override or channel through oil in a formation. The steam-foam process which consists of adding surfactant with or without non-condensible gas to the injected steam, was developed to improve the sweep efficiency of steam drive and cyclic steam processes. The foam-forming components injected with the steam stabilize the liquid lamellae and cause some of the steam to exist as a discontinuous phase. The steam mobility (gas relative permeability) is thereby reduced resulting in an increased pressure gradient in the steam-swept region, to divert steam to the unheated interval and displace the heated oil better. The propagation of surfactant in the reservoir is determined by its thermal stability, adsorption, precipitation, and oil partitioning behaviour. The propagation of the foam is determined by the mechanisms that generate and destroyfoam in the reservoir, including gas and liquid velocities, condensation and evaporation, non-condensible gas, and the presence of oil. Strategies were developed to minimize the chemical requirements for generating effective steam-foams. Economic steam-foam processes requires that surfactant losses are minimized, foam propagation and foam stability is maximized at surfactant concentrations lower than has hereto been used in the field. This paper, based on laboratory finding and field experience, discusses the important considerations which affect the efficient application of steam-foam in the field.

  20. Start Up Application Concerns with Field Programmable Gate Arrays (FPGAs)

    NASA Technical Reports Server (NTRS)

    Katz, Richard B.

    1999-01-01

    This note is being published to improve the visibility of this subject, as we continue to see problems surface in designs, as well as to add additional information to the previously published note for design engineers. The original application note focused on designing systems with no single point failures using Actel Field Programmable Gate Arrays (FPGAs) for critical applications. Included in that note were the basic principles of operation of the Actel FPGA and a discussion of potential single-point failures. The note also discussed the issue of startup transients for that class of device. It is unfortunate that we continue to see some design problems using these devices. This note will focus on the startup properties of certain electronic components, in general, and current Actel FPGAs, in particular. Devices that are "power-on friendly" are currently being developed by Actel, as a variant of the new SX series of FPGAs. In the ideal world, electronic components would behave much differently than they do in the real world, The chain, of course, starts with the power supply. Ideally, the voltage will immediately rise to a stable V(sub cc) level, of course, it does not. Aside from practical design considerations, inrush current limits of certain capacitors must be observed and the power supply's output may be intentionally slew rate limited to prevent a large current spike on the system power bus. In any event, power supply rise time may range from less than I msec to 100 msec or more.

  1. Computation of the gravity field and its gradient: Some applications

    NASA Astrophysics Data System (ADS)

    Dubey, C. P.; Tiwari, V. M.

    2016-03-01

    New measuring instruments of Earth's gravity gradient tensors (GGT) have offered a fresh impetus to gravimetry and its application in subsurface exploration. Several efforts have been made to provide a thorough understanding of the complex properties of the gravity gradient tensor and its mathematical formulations to compute GGT. However, there is not much open source software available. Understanding of the tensor properties leads to important guidelines in the development of real three dimensional geological models. We present a MATLAB computational algorithm to calculate the gravity field and full gravity gradient tensor for an undulated surface followed by regular geometries like an infinite horizontal slab, a vertical sheet, a solid sphere, a vertical cylinder, a normal fault model and a rectangular lamina or conglomerations of such bodies and the results are compared with responses using professional software based on different computational schemes. Real subsurface geometries of complex geological structures of interest are approximated through arrangements of vertical rectangular laminas. The geological application of this algorithm is demonstrated over a horst-type structure of Oklahoma Aulacogen, USA and Vredefort Dome, South Africa, where measured GGT data are available.

  2. Applications of T-ray spectroscopy in the petroleum field

    NASA Astrophysics Data System (ADS)

    Al-Douseri, Fatemah M.

    2005-11-01

    Because of heavy usage of petroleum products, which are the main source of energy in daily life and industry, a fast, reliable, and portable analysis system is needed to complement traditional techniques. Terahertz (THz) radiation, or T-rays, is electromagnetic radiation in the 0.1 to 10 THz frequency range. One unique attribute of T-rays is their ability to sensitively measure the induced molecular dipole moments in non-polar liquids such as aromatics, which make up the majority of the contents of many petroleum products. This information can lead to several applications in petroleum analysis. The application of T-rays to petroleum product analysis has the potential to make a significant impact in the petroleum field. In this dissertation, I show the first use of T-ray time-domain spectroscopy and Fourier transform infrared (FTIR) spectroscopy techniques for petroleum product analysis. I report on the feasibility of analyzing selected petroleum products, including gasoline, diesel, lubricating oil, and selected compounds of toluene, ethylbenzene, and xylene (BTEX). With the use of a T-ray time-domain spectrometer. I demonstrate that gasolines with different octane numbers and diesel all show specific absorption coefficients and refractive indexes in the spectral range from 0.5 to 2.0 THz. Furthermore, I report the qualitative and quantitative analysis of selected BTEX components in gasoline and diesel using FTIR spectroscopy in the 50 to 650 cm-1 region. I distinguish gasolines with different octane numbers from diesel and lubricating oil according to their different spectral features. I also determine the concentration of (o, m, p) xylene isomers in gasoline according to their specific absorption bands. The experimental results in this thesis, imply that linking between the knowledge of petroleum products and the development of T-ray spectrometer with the cooperation of industry might translate the T-ray spectroscopic system into a real world application in

  3. Applications of magnetic fields to control fluids in reduced gravity

    NASA Astrophysics Data System (ADS)

    Simmons, Benjamin Douglas

    Continued exploration of space will face many challenges of technology, time, and human endurance. Development of new technologies or maturation of existing proposed technologies will be crucial to the future of manned space exploration. Society's current dependence on cryogenic liquid fuels for heavy space rocketry and manned space vehicles presents limitations on the scope of planned missions. This work presents the development of a new computational tool that is used to study the effectiveness of a magnetic field when used to control the position of paramagnetic Liquid Oxygen(LOX) in a spacecraft tank under reduced gravity conditions. This tool, Surface Evolver , was selected because of its abilities to predict equilibrium free surface shapes and to complete a simulation in a short time period of minutes to hours, instead of the often weeks required of time accurate software tools. The development of this tool will be presented through derivation of supporting equations, validation cases, and it will be applied to study problems of varying scale. The derivation of the supporting equations will illustrate the energies of interest to the current study, and also serve as a guide for future energy model development. Validation cases are presented and analyzed for each of the new energy models developed: Potential Energy due to gravitational influence, Energy due to the presence of a fluid within a magnetic field (constant gradient, wire, and dipole magnetic fields), and other models that include Surface Tension and contact angle enforcement at boundaries. This collection of models will be used to study the effect of the direction and magnitude of the gravitational energy vector upon the resulting equilibrium free surface shape of LOX under the influence of a magnetic field. The new computational tool was used to study a range of problems from small scale experiment simulations to full-scale spacecraft applications. Conclusions are drawn as to the effectiveness of

  4. Relativistic tight-binding approximation method for materials immersed in a uniform magnetic field: Application to crystalline silicon

    NASA Astrophysics Data System (ADS)

    Higuchi, Katsuhiko; Hamal, Dipendra Bahadur; Higuchi, Masahiko

    2015-02-01

    We present a relativistic tight-binding (TB) approximation method that is applicable to actual crystalline materials immersed in a uniform magnetic field. The magnetic Bloch theorem is used to make the dimensions of the Hamiltonian matrix finite. In addition, by means of the perturbation theory, the magnetic hopping integral that appears in the Hamiltonian matrix is reasonably approximated as the relativistic hopping integral multiplied by the magnetic-field-dependent phase factor. In order to calculate the relativistic hopping integral, the relativistic version of the so-called Slater-Koster table is also given in an explicit form. We apply the present method to crystalline silicon immersed in a uniform magnetic field, and reveal its energy-band structure that is defined in the magnetic first Brillouin zone. It is found that the widths of energy-bands increase with increasing the magnetic field, which indicates the magnetic-field dependence of the appropriateness of the effective mass approximation. The recursive energy spectrum, which is the so-called butterfly diagram, can also be seen in the k -space plane perpendicular to the magnetic field.

  5. Novel 1H low field nuclear magnetic resonance applications for the field of biodiesel

    PubMed Central

    2013-01-01

    Background Biodiesel production has increased dramatically over the last decade, raising the need for new rapid and non-destructive analytical tools and technologies. 1H Low Field Nuclear Magnetic Resonance (LF-NMR) applications, which offer great potential to the field of biodiesel, have been developed by the Phyto Lipid Biotechnology Lab research team in the last few years. Results Supervised and un-supervised chemometric tools are suggested for screening new alternative biodiesel feedstocks according to oil content and viscosity. The tools allowed assignment into viscosity groups of biodiesel-petrodiesel samples whose viscosity is unknown, and uncovered biodiesel samples that have residues of unreacted acylglycerol and/or methanol, and poorly separated and cleaned glycerol and water. In the case of composite materials, relaxation time distribution, and cross-correlation methods were successfully applied to differentiate components. Continuous distributed methods were also applied to calculate the yield of the transesterification reaction, and thus monitor the progress of the common and in-situ transesterification reactions, offering a tool for optimization of reaction parameters. Conclusions Comprehensive applied tools are detailed for the characterization of new alternative biodiesel resources in their whole conformation, monitoring of the biodiesel transesterification reaction, and quality evaluation of the final product, using a non-invasive and non-destructive technology that is new to the biodiesel research area. A new integrated computational-experimental approach for analysis of 1H LF-NMR relaxometry data is also presented, suggesting improved solution stability and peak resolution. PMID:23590829

  6. Application of Pulsed-Field Gel Electrophoresis To Identify Potential Outbreaks of Campylobacteriosis in New Zealand

    PubMed Central

    Gilpin, Brent; Cornelius, Angela; Robson, Beth; Boxall, Naomi; Ferguson, Alan; Nicol, Carolyn; Henderson, Tom

    2006-01-01

    Since 2002, New Zealand's incidence of campylobacteriosis has exceeded 300 cases per 100,000 people per annum. To evaluate genetic variation in human isolates, 183 Campylobacter isolates were collected from a single clinical laboratory in Christchurch: 77 during an 8-week period in spring, and the rest 3 months later over a second 8-week period in autumn. Isolates were identified to the species level and subtyped using Penner serotyping (Campylobacter jejuni only) and pulsed-field gel electrophoresis (PFGE) using both SmaI and KpnI. Approximately two-thirds of the isolates could be grouped into clusters of between 2 and 26 isolates with indistinguishable SmaI and KpnI patterns. Less than 10% of the isolates were of the same type between the two sampling periods. The epidemiological relevance of the PFGE clusters was supported by temporal clustering, some spatial clustering, and some statistically significant demographic similarities among cases in a cluster. Conversely, patient cases yielding isolates which did not cluster with isolates from other cases were more likely to report recent overseas travel and less likely to live within larger urban centers. To identify whether these clusters actually represent common-source outbreaks, however, would require the detailed, rapid, and reiterative epidemiological investigation of cases within a PFGE cluster. The combined and timely application of subtyping and epidemiological investigation would appear to be a promising strategy for understanding campylobacteriosis in New Zealand. PMID:16455892

  7. Application of near-field microwave sensing techniques for segregation detection in concrete members

    NASA Astrophysics Data System (ADS)

    Bois, K. J.; Benally, A. D.; Zoughi, R.; Nowak, P. S.

    2000-05-01

    In this presentation, a simple, low-cost near-field microwave nondestructive inspection technique for segregation detection in concrete members is presented. This process employs information from the measured magnitude of reflection coefficient at the aperture of an open-ended rectangular waveguide sensor. These measurements, whose results will be presented, were conducted using a Hewlett-Packard HP8510B network analyzer. However, in practice a simple and relatively inexpensive inspection apparatus constructed from discrete microwave components can easily be employed. It is shown that the standard deviation of magnitude of reflection coefficient measurement is linearly correlated with the aggregate density in concrete. Furthermore, for concrete in which the aggregate has segregated, this measurable parameter will change as a function of vertical position of the microwave scan. Results correlating the microwave measurements to the actual aggregate density of a well consolidated concrete specimen and a specimen in which the aggregate has segregated will be presented. Finally, the simple and low cost application of this method for in situ detection of aggregate segregation in concrete structures will be discussed.

  8. Clinical application of navigation surgery using augmented reality in the abdominal field.

    PubMed

    Okamoto, Tomoyoshi; Onda, Shinji; Yanaga, Katsuhiko; Suzuki, Naoki; Hattori, Asaki

    2015-04-01

    This article presents general principles and recent advancements in the clinical application of augmented reality-based navigation surgery (AR based NS) for abdominal procedures and includes a description of our clinical trial and subsequent outcomes. Moreover, current problems and future aspects are discussed. The development of AR-based NS in the abdomen is delayed compared with another field because of the problem of intraoperative organ deformations or the existence of established modalities. Although there are a few reports on the clinical use of AR-based NS for digestive surgery, sophisticated technologies in urology have often been reported. However, the rapid widespread use of video- or robot assisted surgeries requires this technology. We have worked to develop a system of AR-based NS for hepatobiliary and pancreatic surgery. Then we developed a short rigid scope that enables surgeons to obtain 3D view. We recently focused on pancreatic surgery, because intraoperative organ shifting is minimal. The position of each organ in overlaid image almost corresponded with that of the actual organ with about 5 mm of mean registration errors. Intraoperative information generated from this system provided us with useful navigation. However, AR-based NS has several problems to overcome such as organ deformity, evaluation of utility, portability or cost.

  9. Application of chitin and chitosan derivatives in the pharmaceutical field.

    PubMed

    Kato, Yoshinori; Onishi, Hiraku; Machida, Yoshiharu

    2003-10-01

    Chitin and chitosan derivatives are used as excipients and drug carriers in the pharmaceutical field. Their derivatization contributed to expansion of application and decrease toxicity. Chitosan is used as an excipient in oral dosage form. Chitosan tablet can exhibit a sustained drug release compared to commercial products. Films prepared using chitin or chitosan have been developed as wound dressings, oral mucoadhesive and water-resisting adhesive by virtue of their release characteristics and adhesion. Intratumoral administration of gadopentetic acid-chitosan complex nanoparticles (approximately 430 nm in diameter) has been more effective for gadolinium neutron-capture therapy compared with a group treated with the solution. Compared to intragastrical feeding with diphtheria toxoid (DT) in PBS, a strong enhancement of the systemic (IgG) and local (IgA) immune responses against DT has been observed in mice fed with DT loaded chitosan microparticles (approximately 4.7 microm in size). When DNA-loaded chitosan microspheres (1.15 - 1.28 microm) were intramuscularly administrated into mice, high beta-galactosidase and luciferase productions were obtained even after a long post-transfection period (12 weeks). N-Succinyl-chitosan (Suc-Chi) has been studied for cancer chemotherapy as a drug carrier and the conjugates of mitomycin C with Suc-Chi exhibited good antitumor activities against various tumors. Furthermore, trimethyl-chitosan and monocarboxymethyl-chitosan has been shown to be effective as intestinal absorption enhancers due to their physiological properties. Chitosan-thioglycolic acid conjugates has been found to be a promising candidate as scaffold material in tissue engineering due to their physicochemical properties. This review summarizes the application of chitin and chitosan derivatives for hospital preparations and drug carriers. PMID:14529420

  10. SPARTA - Solver for Polarized Atmospheric Radiative Transfer Applications: Introduction and application to Saharan dust fields

    NASA Astrophysics Data System (ADS)

    Barlakas, Vasileios; Macke, Andreas; Wendisch, Manfred

    2016-07-01

    Non-spherical particles in the atmosphere absorb and scatter solar radiation. They change the polarization state of solar radiation depending on their shape, size, chemical composition and orientation. To quantify polarization effects, a new three-dimensional (3D) vector radiative transfer model, SPARTA (Solver for Polarized Atmospheric Radiative Transfer Applications) is introduced and validated against benchmark results. SPARTA employs the statistical forward Monte Carlo technique for efficient column-response pixel-based radiance calculations including polarization for 3D inhomogeneous cloudless and cloudy atmospheres. A sensitivity study has been carried out and exemplarily results are presented for two lidar-based mineral dust fields. The scattering and absorption properties of the dust particles have been computed for spheroids and irregular shaped particles. Polarized radiance fields in two-dimensional (2D) and one-dimensional (1D) inhomogeneous Saharan dust fields have been calculated at 532 nm wavelength. The domain-averaged results of the normalized reflected radiance are almost identical for the 1D and 2D modes. In the areas with large spatial gradient in optical thickness with expected significant horizontal photon transport, the radiance fields of the 2D mode differ by about ±12% for the first Stokes component (radiance, I) and ±8% for the second Stokes component (linear polarization, Q) from the fields of the 1D mode.

  11. 30 CFR 18.93 - Application for field approval; filing procedures.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Application for field approval; filing... TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS ELECTRIC MOTOR-DRIVEN MINE EQUIPMENT AND ACCESSORIES Field Approval of Electrically Operated Mining Equipment § 18.93 Application for field approval;...

  12. 30 CFR 18.93 - Application for field approval; filing procedures.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Application for field approval; filing... TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS ELECTRIC MOTOR-DRIVEN MINE EQUIPMENT AND ACCESSORIES Field Approval of Electrically Operated Mining Equipment § 18.93 Application for field approval;...

  13. 9 CFR 352.4 - Application for ante-mortem inspection service in the field.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Application for ante-mortem inspection... Animals § 352.4 Application for ante-mortem inspection service in the field. Any exotic animal producer desiring field ante-mortem exotic animal inspection service must receive approval of the field...

  14. Development of an electric field application system with transparent electrodes towards the electron EDM measurement with laser-cooled Fr atoms

    NASA Astrophysics Data System (ADS)

    Ishikawa, Taisuke; Ando, Shun; Aoki, Takahiro; Arikawa, Hiroshi; Harada, Ken-Ichi; Hayamizu, Tomohiro; Inoue, Takeshi; Itoh, Masatoshi; Kawamura, Hirokazu; Kato, Ko; Sakamoto, Kosuke; Uchiyama, Aiko; Sakemi, Yasuhiro

    2014-09-01

    The permanent electric dipole moment (EDM) of elementary particles is a good probe for new physics beyond the standard model. Since the francium (Fr) atom has a large enhancement factor of the electron EDM and laser-cooled atoms can have long coherence times, we plan to utilize laser-cooled Fr atoms for the electron EDM search experiment. Besides, a strong electric field is one of key issues for the EDM experiment. Recently, we have embarked on a development of the electric field application system with transparent electrodes coated by tin-doped indium oxide (ITO). The ITO electrodes break the difficulty in the coexistence of electrodes with several cooling laser lights. The actual electric field applied to the atom is evaluated by measuring the dc Stark shift for the laser-cooled rubidium atoms. In this presentation, the present status of the electric field application system will be reported. The permanent electric dipole moment (EDM) of elementary particles is a good probe for new physics beyond the standard model. Since the francium (Fr) atom has a large enhancement factor of the electron EDM and laser-cooled atoms can have long coherence times, we plan to utilize laser-cooled Fr atoms for the electron EDM search experiment. Besides, a strong electric field is one of key issues for the EDM experiment. Recently, we have embarked on a development of the electric field application system with transparent electrodes coated by tin-doped indium oxide (ITO). The ITO electrodes break the difficulty in the coexistence of electrodes with several cooling laser lights. The actual electric field applied to the atom is evaluated by measuring the dc Stark shift for the laser-cooled rubidium atoms. In this presentation, the present status of the electric field application system will be reported. This work is supported by Grants-in-Aid for Scientific Research (No. 26220705) and Tohoku University's Focused Research Project.

  15. Evanescent field: A potential light-tool for theranostics application

    NASA Astrophysics Data System (ADS)

    Polley, Nabarun; Singh, Soumendra; Giri, Anupam; Pal, Samir Kumar

    2014-03-01

    A noninvasive or minimally invasive optical approach for theranostics, which would reinforce diagnosis, treatment, and preferably guidance simultaneously, is considered to be major challenge in biomedical instrument design. In the present work, we have developed an evanescent field-based fiber optic strategy for the potential theranostics application in hyperbilirubinemia, an increased concentration of bilirubin in the blood and is a potential cause of permanent brain damage or even death in newborn babies. Potential problem of bilirubin deposition on the hydroxylated fiber surface at physiological pH (7.4), that masks the sensing efficacy and extraction of information of the pigment level, has also been addressed. Removal of bilirubin in a blood-phantom (hemoglobin and human serum albumin) solution from an enhanced level of 77 μM/l (human jaundice >50 μM/l) to ˜30 μM/l (normal level ˜25 μM/l in human) using our strategy has been successfully demonstrated. In a model experiment using chromatography paper as a mimic of biological membrane, we have shown efficient degradation of the bilirubin under continuous monitoring for guidance of immediate/future course of action.

  16. How People Actually Use Thermostats

    SciTech Connect

    Meier, Alan; Aragon, Cecilia; Hurwitz, Becky; Mujumdar, Dhawal; Peffer, Therese; Perry, Daniel; Pritoni, Marco

    2010-08-15

    Residential thermostats have been a key element in controlling heating and cooling systems for over sixty years. However, today's modern programmable thermostats (PTs) are complicated and difficult for users to understand, leading to errors in operation and wasted energy. Four separate tests of usability were conducted in preparation for a larger study. These tests included personal interviews, an on-line survey, photographing actual thermostat settings, and measurements of ability to accomplish four tasks related to effective use of a PT. The interviews revealed that many occupants used the PT as an on-off switch and most demonstrated little knowledge of how to operate it. The on-line survey found that 89% of the respondents rarely or never used the PT to set a weekday or weekend program. The photographic survey (in low income homes) found that only 30% of the PTs were actually programmed. In the usability test, we found that we could quantify the difference in usability of two PTs as measured in time to accomplish tasks. Users accomplished the tasks in consistently shorter times with the touchscreen unit than with buttons. None of these studies are representative of the entire population of users but, together, they illustrate the importance of improving user interfaces in PTs.

  17. Higher-order Fourier analysis over finite fields and applications

    NASA Astrophysics Data System (ADS)

    Hatami, Pooya

    Higher-order Fourier analysis is a powerful tool in the study of problems in additive and extremal combinatorics, for instance the study of arithmetic progressions in primes, where the traditional Fourier analysis comes short. In recent years, higher-order Fourier analysis has found multiple applications in computer science in fields such as property testing and coding theory. In this thesis, we develop new tools within this theory with several new applications such as a characterization theorem in algebraic property testing. One of our main contributions is a strong near-equidistribution result for regular collections of polynomials. The densities of small linear structures in subsets of Abelian groups can be expressed as certain analytic averages involving linear forms. Higher-order Fourier analysis examines such averages by approximating the indicator function of a subset by a function of bounded number of polynomials. Then, to approximate the average, it suffices to know the joint distribution of the polynomials applied to the linear forms. We prove a near-equidistribution theorem that describes these distributions for the group F(n/p) when p is a fixed prime. This fundamental fact was previously known only under various extra assumptions about the linear forms or the field size. We use this near-equidistribution theorem to settle a conjecture of Gowers and Wolf on the true complexity of systems of linear forms. Our next application is towards a characterization of testable algebraic properties. We prove that every locally characterized affine-invariant property of functions f : F(n/p) → R with n∈ N, is testable. In fact, we prove that any such property P is proximity-obliviously testable. More generally, we show that any affine-invariant property that is closed under subspace restrictions and has "bounded complexity" is testable. We also prove that any property that can be described as the property of decomposing into a known structure of low

  18. 30 CFR 18.93 - Application for field approval; filing procedures.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS ELECTRIC MOTOR-DRIVEN MINE EQUIPMENT AND ACCESSORIES Field Approval of Electrically Operated Mining Equipment § 18.93 Application for field approval;...

  19. Safe, Effective Use of Pesticides, A Manual for Commercial Applicators: Field Crop Pest Control.

    ERIC Educational Resources Information Center

    Erdmann, M. H.; And Others

    This manual is intended to assist pesticide applicators to meet the requirements for certification under the Michigan Pesticide Control Act of 1976. The primary focus of this publication is on field crop pest control. The five sections presented describe: (1) Field crop pests; (2) Using pesticides in field crops; (3) Weed pests of field crops; (4)…

  20. Optimizing the electric field around solid and core-shell alloy nanostructures for near-field applications.

    PubMed

    Montaño-Priede, Luis; Peña-Rodríguez, Ovidio; Rivera, Antonio; Guerrero-Martínez, Andrés; Pal, Umapada

    2016-08-21

    The near electric field enhancement around plasmonic nanoparticles (NPs) is very important for applications like surface enhanced spectroscopies, plasmonic dye-sensitized solar cells and plasmon-enhanced OLEDs, where the interactions occur close to the surface of the NPs. In this work we have calculated the near-field enhancement around solid and core-shell alloy NPs as a function of their geometrical parameters and composition. We have found that the field enhancement is lower in the AuxAg1-x alloys with respect to pure Ag NPs, but it is still high enough for most near-field applications. The higher order modes have a stronger influence over the near-field due to a sharper spatial decay of the near electric field with the increase of the order of multipolar modes. For the same reason, in AuxAg1-x@SiO2 core-shell structures, the quadrupolar mode is dominant around the core, whereas the dipolar mode is predominant around the shell. The LSPR modes can have different behaviours in the near- and the far-field, particularly for larger particles with high Ag contents, which indicates that caution must be exercised for designing plasmonic nanostructures for near-field applications, as the variations of the LSPR in the near-field cannot be inferred from those observed in the far-field. These results have important implications for the application of gold-silver alloy NPs in surface enhanced spectroscopies and in the fabrication of plasmon-based optoelectronic devices, like dye-sensitized solar cells and plasmon-enhanced organic light-emitting diodes.

  1. Optimizing the electric field around solid and core-shell alloy nanostructures for near-field applications

    NASA Astrophysics Data System (ADS)

    Montaño-Priede, Luis; Peña-Rodríguez, Ovidio; Rivera, Antonio; Guerrero-Martínez, Andrés; Pal, Umapada

    2016-08-01

    The near electric field enhancement around plasmonic nanoparticles (NPs) is very important for applications like surface enhanced spectroscopies, plasmonic dye-sensitized solar cells and plasmon-enhanced OLEDs, where the interactions occur close to the surface of the NPs. In this work we have calculated the near-field enhancement around solid and core-shell alloy NPs as a function of their geometrical parameters and composition. We have found that the field enhancement is lower in the AuxAg1-x alloys with respect to pure Ag NPs, but it is still high enough for most near-field applications. The higher order modes have a stronger influence over the near-field due to a sharper spatial decay of the near electric field with the increase of the order of multipolar modes. For the same reason, in AuxAg1-x@SiO2 core-shell structures, the quadrupolar mode is dominant around the core, whereas the dipolar mode is predominant around the shell. The LSPR modes can have different behaviours in the near- and the far-field, particularly for larger particles with high Ag contents, which indicates that caution must be exercised for designing plasmonic nanostructures for near-field applications, as the variations of the LSPR in the near-field cannot be inferred from those observed in the far-field. These results have important implications for the application of gold-silver alloy NPs in surface enhanced spectroscopies and in the fabrication of plasmon-based optoelectronic devices, like dye-sensitized solar cells and plasmon-enhanced organic light-emitting diodes.

  2. Magnetic Field Applications in Semiconductor Crystal Growth and Metallurgy

    NASA Technical Reports Server (NTRS)

    Mazuruk, Konstantin; Ramachandran, Narayanan; Grugel, Richard; Curreri, Peter A. (Technical Monitor)

    2002-01-01

    The Traveling Magnetic Field (TMF) technique, recently proposed to control meridional flow in electrically conducting melts, is reviewed. In particular, the natural convection damping capability of this technique has been numerically demonstrated with the implication of significantly improving crystal quality. Advantages of the traveling magnetic field, in comparison to the more mature rotating magnetic field method, are discussed. Finally, results of experiments with mixing metallic alloys in long ampoules using TMF is presented

  3. Explosively produced megagauss fields and recent solid state applications

    SciTech Connect

    Fowler, C.M.; Freeman, B.L.; Hults, W.L.; King, J.C.; Mueller, F.M.; Rickel, D.G.; Smith, J.L.; Brooks, J.S.; Goettee, J.D.

    1993-12-31

    Large magnetic fields may be generated by compression of an initial magnetic flux generated over a large area at relatively low magnetic field into a region of smaller area. Following a discussion of flux compression principles, the authors discuss megagauss field systems in use at Los Alamos where chemical explosives are used to compress the flux. Their use in some solid state experiments will be discussed briefly, including a planned set of experiments on YBCO to be done jointly with a Russian team, whose aim is to determine the low temperature, critical magnetic field of YBCO.

  4. Application peculiarities of magnetic materials for protection from magnetic fields

    NASA Astrophysics Data System (ADS)

    Wai, P.; Dmitrenko, V.; Grabchikov, S.; Vlasik, K.; Novikov, A.; Petrenko, D.; Trukhanov, V.; Ulin, S.; Uteshev, Z.; Chernysheva, V.; Shustov, A.

    2016-02-01

    In different materials for magnetic shields, the maximum permeability is achieved for different values of the magnetic field. This determines the choice of material. So for protection from magnetic fields strength of 10 - 150 A/m it is advisable to apply the amorphous ribbon 84KXCP. For stronger fields (more than 400 A/m) it is recommended to use MFS based on Ni20Fe80. Use of these materials allows creating an effective shield working in a wide range of magnetic field strengths.

  5. Retrieving Storm Electric Fields From Aircraft Field Mill Data. Part 2; Applications

    NASA Technical Reports Server (NTRS)

    Koshak, W. J.; Mach, D. M.; Christian, H. J.; Stewart, M. F.; Bateman, M. G.

    2005-01-01

    The Lagrange multiplier theory and "pitch down method" developed in Part I of this study are applied to complete the calibration of a Citation aircraft that is instrumented with six field mill sensors. When side constraints related to average fields are used, the method performs well in computer simulations. For mill measurement errors of 1 V/m and a 5 V/m error in the mean fair weather field function, the 3-D storm electric field is retrieved to within an error of about 12%. A side constraint that involves estimating the detailed structure of the fair weather field was also tested using computer simulations. For mill measurement errors of 1 V/m, the method retrieves the 3-D storm field to within an error of about 8% if the fair weather field estimate is typically within 1 V/m of the true fair weather field. Using this side constraint and data from fair weather field maneuvers taken on 29 June 2001, the Citation aircraft was calibrated. The resulting calibration matrix was then used to retrieve storm electric fields during a Citation flight on 2 June 2001. The storm field results are encouraging and agree favorably with the results obtained from earlier calibration analyses that were based on iterative techniques.

  6. Retrieving Storm Electric Fields from Aircrfaft Field Mill Data: Part II: Applications

    NASA Technical Reports Server (NTRS)

    Koshak, William; Mach, D. M.; Christian H. J.; Stewart, M. F.; Bateman M. G.

    2006-01-01

    The Lagrange multiplier theory developed in Part I of this study is applied to complete a relative calibration of a Citation aircraft that is instrumented with six field mill sensors. When side constraints related to average fields are used, the Lagrange multiplier method performs well in computer simulations. For mill measurement errors of 1 V m(sup -1) and a 5 V m(sup -1) error in the mean fair-weather field function, the 3D storm electric field is retrieved to within an error of about 12%. A side constraint that involves estimating the detailed structure of the fair-weather field was also tested using computer simulations. For mill measurement errors of 1 V m(sup -l), the method retrieves the 3D storm field to within an error of about 8% if the fair-weather field estimate is typically within 1 V m(sup -1) of the true fair-weather field. Using this type of side constraint and data from fair-weather field maneuvers taken on 29 June 2001, the Citation aircraft was calibrated. Absolute calibration was completed using the pitch down method developed in Part I, and conventional analyses. The resulting calibration matrices were then used to retrieve storm electric fields during a Citation flight on 2 June 2001. The storm field results are encouraging and agree favorably in many respects with results derived from earlier (iterative) techniques of calibration.

  7. A framework for modelling kinematic measurements in gravity field applications

    NASA Technical Reports Server (NTRS)

    Schwarz, K. P.; Wei, M.

    1989-01-01

    To assess the resolution of the local gravity field from kinematic measurements, a state model for motion in the gravity field of the earth is formulated. The resulting set of equations can accommodate gravity gradients, specific force, acceleration, velocity and position as input data and can take into account approximation errors as well as sensor errors.

  8. 30 CFR 203.63 - Does my application have to include all leases in the field?

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... in the field? 203.63 Section 203.63 Mineral Resources BUREAU OF SAFETY AND ENVIRONMENTAL ENFORCEMENT... Sulfur General § 203.63 Does my application have to include all leases in the field? (a) For authorized... the date of application, except as provided in paragraph (a)(3) of this section and § 203.64....

  9. The Application of Thermal Plasma to Extraction Metallurgy and Related Fields

    NASA Technical Reports Server (NTRS)

    Akashi, K.

    1980-01-01

    Various applications of thermal plasma to extraction metallurgy and related fields are surveyed, chiefly on the basis of documents published during the past two or three years. Applications to melting and smelting, to thermal decomposition, to reduction, to manufacturing of inorganic compounds, and to other fields are considered.

  10. Field evaporation ion source with possible application to electrostatic propulsion

    NASA Technical Reports Server (NTRS)

    Weizer, V. G.

    1971-01-01

    Field evaporation of solid metal electrodes has been proposed as an ion source for an electrostatic propulsion device. The chief advantage over existing ion sources is the prospect of 100 percent fuel utilization efficiency. This advantage arises as a result of the elimination of the need for a gaseous precursor state for propellant ionization. The attainment of required high surface field strengths is achieved through field-induced extrusion of the electrode geometry at elevated temperatures. Contributions of both surface and bulk transport mechanisms are taken into account.

  11. Application of the Chameleon Model to EM Field Momentum

    NASA Astrophysics Data System (ADS)

    Robertson, Glen A.

    2008-01-01

    The Chameleon scalar field model proposed by Khoury and Weltman presents an alternative mechanism for circumventing the constraints from local tests of gravity by mediating a fifth force for cosmological expansion, which could result in experimental signatures detectable through modest improvements of current laboratory set-ups in the vicinity of oscillating matter. In this paper, the oscillation of a dielectric by a crossed EM field is investigated in light of the Chameleon model. An EM excited Chameleon field-force equation is developed and compared to several EM experiments using the Barium Titanate based dielectric material.

  12. Application of the general thermal field model to simulate the behaviour of nanoscale Cu field emitters

    SciTech Connect

    Eimre, Kristjan; Aabloo, Alvo; Parviainen, Stefan Djurabekova, Flyura; Zadin, Vahur

    2015-07-21

    Strong field electron emission from a nanoscale tip can cause a temperature rise at the tip apex due to Joule heating. This becomes particularly important when the current value grows rapidly, as in the pre-breakdown (the electrostatic discharge) condition, which may occur near metal surfaces operating under high electric fields. The high temperatures introduce uncertainties in calculations of the current values when using the Fowler–Nordheim equation, since the thermionic component in such conditions cannot be neglected. In this paper, we analyze the field electron emission currents as the function of the applied electric field, given by both the conventional Fowler–Nordheim field emission and the recently developed generalized thermal field emission formalisms. We also compare the results in two limits: discrete (atomistic simulations) and continuum (finite element calculations). The discrepancies of both implementations and their effect on final results are discussed. In both approaches, the electric field, electron emission currents, and Joule heating processes are simulated concurrently and self-consistently. We show that the conventional Fowler–Nordheim equation results in significant underestimation of electron emission currents. We also show that Fowler–Nordheim plots used to estimate the field enhancement factor may lead to significant overestimation of this parameter especially in the range of relatively low electric fields.

  13. Application of the general thermal field model to simulate the behaviour of nanoscale Cu field emitters

    NASA Astrophysics Data System (ADS)

    Eimre, Kristjan; Parviainen, Stefan; Aabloo, Alvo; Djurabekova, Flyura; Zadin, Vahur

    2015-07-01

    Strong field electron emission from a nanoscale tip can cause a temperature rise at the tip apex due to Joule heating. This becomes particularly important when the current value grows rapidly, as in the pre-breakdown (the electrostatic discharge) condition, which may occur near metal surfaces operating under high electric fields. The high temperatures introduce uncertainties in calculations of the current values when using the Fowler-Nordheim equation, since the thermionic component in such conditions cannot be neglected. In this paper, we analyze the field electron emission currents as the function of the applied electric field, given by both the conventional Fowler-Nordheim field emission and the recently developed generalized thermal field emission formalisms. We also compare the results in two limits: discrete (atomistic simulations) and continuum (finite element calculations). The discrepancies of both implementations and their effect on final results are discussed. In both approaches, the electric field, electron emission currents, and Joule heating processes are simulated concurrently and self-consistently. We show that the conventional Fowler-Nordheim equation results in significant underestimation of electron emission currents. We also show that Fowler-Nordheim plots used to estimate the field enhancement factor may lead to significant overestimation of this parameter especially in the range of relatively low electric fields.

  14. Actualities and Perspectives in Neurosurgery

    PubMed Central

    Iencean, SM; Brehar, FM

    2008-01-01

    In the field of neurosurgery, like in other surgical specialties, the last decades have brought major achievements. The series of revolutionary discoveries has started during the last century in the fifties, with stereotactic radiosurgery, then continued with the implementation of operative microscope (during the seventies), the endovascular embolisation in the nineties and finally with the major improvement in robotic neurosurgery and molecular neurosurgery at the beginning of this century. The major innovation has been brought not only in the field of therapeutical measures but also in the field of neuro– imaging. Thus, the modern MRI with more than 3 Tesla, can reveal to the neurosurgeon the most intimate structures of the nervous system. Several important areas in neurosurgery like: vascular neurosurgery, functional neurosurgery and brain tumors pathology, benefit from the modern technology and from the latest discoveries from genetic and molecular biology. In conclusion, summarizing the discoveries of the last decade, we emphasize that the related areas like genetics, molecular biology, computer technology become more and more important in the future progress of the neurosurgery. PMID:20108475

  15. Markers of Field Cancerization: Proposed Clinical Applications in Prostate Biopsies

    PubMed Central

    Trujillo, Kristina A.; Jones, Anna C.; Griffith, Jeffrey K.; Bisoffi, Marco

    2012-01-01

    Field cancerization denotes the occurrence of genetic, epigenetic, and biochemical aberrations in structurally intact cells in histologically normal tissues adjacent to cancerous lesions. This paper tabulates markers of prostate field cancerization known to date and discusses their potential clinical value in the analysis of prostate biopsies, including diagnosis, monitoring progression during active surveillance, and assessing efficacy of presurgical neoadjuvant and focal therapeutic interventions. PMID:22666601

  16. Mobile application for field data collection and query: Example from wildlife research (Invited)

    NASA Astrophysics Data System (ADS)

    Bateman, H.; Lindquist, T.; Whitehouse, R.

    2013-12-01

    Field data collection is often used in many scientific disciplines and effective approaches rely on accurate data collection and recording. We designed a smartphone and tablet application (app) for field-collected data and tested it during a study on wildlife. The objective of our study was to determine the effectiveness of mobile applications in wildlife field research. Student software developers designed applications for mobile devices on the iOS and Android operating systems. Both platforms had similar user interactions via data entry on a touch screen using pre-programmed fields, checkboxes, drop-down menus, and keypad entry. The mobile application included features to insure collection of all measurements in the field through pop-up messages and could proof entries for valid formats. We used undergraduate student subjects to compare the duration of data recording and data entry, and the frequency of errors between the mobile application and traditional (paper) techniques. We field-tested the mobile application using an existing study on wildlife. From the field, technicians could query a database stored on a mobile device to view histories of previously captured animals. Overall, we found that because the mobile application allowed us to enter data in a digital format in the field we could eliminate timely steps to process handwritten data sheets and double-checking data entries. We estimated that, for a 2-month project, using the mobile application instead of traditional data entry and proofing reduced our total project time by 10%. To our knowledge, this is the first application developed for mobile devices for wildlife users interesting in viewing animal capture histories from the field and could be developed for use in other areas of field research.

  17. Hysteresis modeling of sequential application of orthogonal fields

    NASA Astrophysics Data System (ADS)

    ElBidweihy, H.; Della Torre, E.; Burgy, C. D.

    2014-05-01

    In a cumulative effort to characterize the sizes, shapes, and distributions of the domains of the structurally superior high strength steels, a characteristic magnetization measurement and a Preisach model are presented to explain and model the distinctive trends observed in the data. The study investigates the effect of a constant transverse magnetic field and a cycling longitudinal magnetic field, applied sequentially, on the major hysteresis loop of solid cylinders of high strength steel. A coupled-hysteron vector Preisach model is extended to model the longitudinal magnetization of the samples under the effect of an applied transverse field. Insights about the microstructure of the rods and the contribution of different domains and magnetization mechanisms to the magnetic response are drawn.

  18. Differential geometry with a projection: application to double field theory

    NASA Astrophysics Data System (ADS)

    Jeon, Imtak; Lee, Kanghoon; Park, Jeong-Hyuck

    2011-04-01

    In recent development of double field theory, as for the description of the massless sector of closed strings, the spacetime dimension is formally doubled, i.e. from D to D+ D, and the T-duality is realized manifestly as a global O( D, D) rotation. In this paper, we conceive a differential geometry characterized by a O( D, D) symmetric projection, as the underlying mathematical structure of double field theory. We introduce a differential operator compatible with the projection, which, contracted with the projection, can be covariantized and may replace the ordinary derivatives in the generalized Lie derivative that generates the gauge symmetry of double field theory. We construct various gauge covariant tensors which include a scalar and a tensor carrying two O( D, D) vector indices.

  19. A wind tunnel application of large-field focusing schlieren

    NASA Technical Reports Server (NTRS)

    Ponton, Michael K.; Seiner, John M.; Mitchell, L. K.; Manning, James C.; Jansen, Bernard J.; Lagen, Nicholas T.

    1992-01-01

    A large-field focusing schlieren apparatus was installed in the NASA Lewis Research Center 9 by 15 foot wind tunnel in an attempt to determine the density gradient flow field of a free jet issuing from a supersonic nozzle configuration. The nozzle exit geometry was designed to reduce acoustic emissions from the jet by enhancing plume mixing. Thus, the flow exhibited a complex three-dimensional structure which warranted utilizing the sharp focusing capability of this type of schlieren method. Design considerations concerning tunnel limitations, high-speed photography, and video tape recording are presented in the paper.

  20. Field application of cathodic prevention on reinforced concrete structures

    SciTech Connect

    Bazzoni, A.; Bazzoni, B.; Lazzari, L.; Bertolini, L.; Pedeferri, P.

    1996-11-01

    This paper illustrates the results gained during the first three years of cathodic protection application to Frejus highway viaducts in northern Italy. CP applications deal with corrosion control of chloride contaminated structures (cathodic protection application properly said) and the corrosion prevention of new non-contaminated structures, constructed with incorporated cathodic protection systems (so-called cathodic prevention). Both normal and post-tensioned structures are present: in the latter case the problems connected with the risk of hydrogen embrittlement of the tendons are discussed. The paper illustrates also the computerized system for gathering and monitoring data and the criteria adopted to evaluate and control the cathodic protection and cathodic prevention conditions as well as to avoid overprotection.

  1. ADVANCING THE FIELD EVALUATIONS AND APPLICATIONS OF LANDFILL BIOREACTORS

    EPA Science Inventory

    The US Environmental Protection Agency (EPA) is undertaking a long-term program to conduct field evaluations of landfill bioreactors. The near-term effort is focused on the development of appropriate monitoring strategies to ensure adequate control of the landfill bioreactors an...

  2. Field Studies of Wasmannia auropunctata Alkylpyrazines: Towards Management Applications

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Field bioassays with Wasmannia auropunctata (Roger) show that the alarm pheromone components 2,5-dimethyl-3-(2-methylbutyl)pyrazine and 3-methyl-2-(2-methylbutyl)pyrazine both attract and arrest ants in a natural environment. Comparisons between lures containing 2,5-dimethyl- 3-(2-methylbutyl)pyrazi...

  3. The applications of conductive nanomaterials in the biomedical field.

    PubMed

    Li, Xiaoming; Zhao, Tianxiao; Sun, Lianwen; Aifantis, Katerina E; Fan, Yubo; Feng, Qingling; Cui, Fuzhai; Watari, Fumio

    2016-01-01

    As their name suggests, conductive nanomaterials (CNMs) are a type of functional materials, which not only have a high surface area to volume ratio, but also possess excellent conductivity. Thus far, CNMs have been widely used in biomedical applications, such as effectively transferring electrical signals, and providing a large surface area to adsorb proteins and induce cellular functions. Recent works propose further applications of CNMs in biosensors, tissue engineering, neural probes, and drug delivery. This review focuses on common types of CNMs and elaborates on their unique properties, which indicate that such CNMs have a potential to develop into a class of indispensable biomaterials for the diagnosis and therapy of human diseases.

  4. Applications of high dielectric materials in high field magnetic resonance

    NASA Astrophysics Data System (ADS)

    Haines, Kristina Noel

    At high magnetic fields, radiation losses, wavelength effects, self-resonance, and the high resistance of components all contribute to losses in conventional RF MRI coil designs. The hypothesis tested here is that these problems can be combated by the use of high permittivity ceramic materials at high fields. High permittivity ceramic dielectric resonators create strong uniform magnetic fields in compact structures at high frequencies and can potentially solve some of the challenges of high field coil design. In this study NMR probes were constructed for operation at 600 MHz (14.1 Tesla) and 900 MHz (21.1 Tesla) using inductively fed CaTiO3 (relative permittivity of 156-166) cylindrical hollow bore dielectric resonators. The designs showed the electric field is largely confined to the dielectric itself, with near zero values in the hollow bore, which accommodates the sample. The 600 MHz probe has an unmatched Q value greater than 2000. Experimental and simulation mapping of the RF field show good agreement, with the ceramic resonator giving a pulse width approximately 25% less than a loop gap resonator of similar inner dimensions. High resolution images, with voxel dimensions less than 50 microm3, have been acquired from fixed zebrafish samples, showing excellent delineation of several fine structures. The 900 MHz probe has an unmatched Q value of 940 and shows Q performance five times better than Alderman-Grant and loop-gap resonators of similar dimensions. High resolution images were acquired of an excised mouse spinal cord (25 microm 3) and an excised rat soleus muscle (20 microm3). The spatial distribution of electromagnetic fields within the human body can be tailored using external dielectric materials. Here, a new material is introduced with high dielectric constant and low background MRI signal. The material is based upon metal titanates, which can be made into geometrically formable suspensions in de-ionized water. The suspension's material properties are

  5. Evaluation of downscaled daily precipitation for FIELD scale hydrologic applications

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Hydrologic and agronomic applications often require a reliable representation of precipitation sequence as well as physical consistency of precipitation series for climate change impact assessment. Herein, we evaluate the daily sequence of the state –of –art downscaled Bias Corrected Constructed Ana...

  6. Field Assessment of A Variable-rate Aerial Application System

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Several experiments were conducted to evaluate the system response of a variable-rate aerial application controller to changing flow rates. The research is collaboration between the USDA, ARS, APTRU and Houma Avionics, USA, manufacturer of a widely used flow controller designed for agricultural airc...

  7. [Application of microwave irradiation technology to the field of pharmaceutics].

    PubMed

    Zhang, Xue-Bing; Shi, Nian-Qiu; Yang, Zhi-Qiang; Wang, Xing-Lin

    2014-03-01

    Microwaves can be directly transformed into heat inside materials because of their ability of penetrating into any substance. The degree that materials are heated depends on their dielectric properties. Materials with high dielectric loss are more easily to reach a resonant state by microwaves field, then microwaves can be absorbed efficiently. Microwave irradiation technique with the unique heating mechanisms could induce drug-polymer interaction and change the properties of dissolution. Many benefits such as improving product quality, increasing energy efficiency and reducing times can be obtained by microwaves. This paper summarized characteristics of the microwave irradiation technique, new preparation techniques and formulation process in pharmaceutical industry by microwave irradiation technology. The microwave technology provides a new clue for heating and drying in the field of pharmaceutics.

  8. Field application of lightweight, hollow-glass-sphere drilling fluid

    SciTech Connect

    1997-11-01

    A new class of underbalanced drilling fluids being developed under US Dept. of Energy (US DOE) sponsorship was recently successfully field tested. The fluid uses hollow glass spheres (HGS`s) to decrease the fluid density to less than that of the base mud while maintaining incompressibility. Concentrations of up to 20 vol% were used to decrease the fluid density to 0.8 lbm/gal less than normally used in the field. Potential benefits of using these fluids include higher penetration rates, decreased formation damage, and lost-circulation mitigation. When used in place of aerated fluid, they can eliminate compressor usage and allow the use of mud-pulse measurement-while-drilling tools. These and other recent advances in technology have spurred interest in underbalanced drilling to the highest level in 30 years. Industry-wide surveys indicate that more than 12% of wells drilled in the US in 1997 will intentionally use underbalanced techniques.

  9. Neural attractor network for application in visual field data classification

    NASA Astrophysics Data System (ADS)

    Fink, Wolfgang

    2004-07-01

    The purpose was to introduce a novel method for computer-based classification of visual field data derived from perimetric examination, that may act as a ' counsellor', providing an independent 'second opinion' to the diagnosing physician. The classification system consists of a Hopfield-type neural attractor network that obtains its input data from perimetric examination results. An iterative relaxation process determines the states of the neurons dynamically. Therefore, even 'noisy' perimetric output, e.g., early stages of a disease, may eventually be classified correctly according to the predefined idealized visual field defect (scotoma) patterns, stored as attractors of the network, that are found with diseases of the eye, optic nerve and the central nervous system. Preliminary tests of the classification system on real visual field data derived from perimetric examinations have shown a classification success of over 80%. Some of the main advantages of the Hopfield-attractor-network-based approach over feed-forward type neural networks are: (1) network architecture is defined by the classification problem; (2) no training is required to determine the neural coupling strengths; (3) assignment of an auto-diagnosis confidence level is possible by means of an overlap parameter and the Hamming distance. In conclusion, the novel method for computer-based classification of visual field data, presented here, furnishes a valuable first overview and an independent 'second opinion' in judging perimetric examination results, pointing towards a final diagnosis by a physician. It should not be considered a substitute for the diagnosing physician. Thanks to the worldwide accessibility of the Internet, the classification system offers a promising perspective towards modern computer-assisted diagnosis in both medicine and tele-medicine, for example and in particular, with respect to non-ophthalmic clinics or in communities where perimetric expertise is not readily available.

  10. X-ray chemical analyzer for field applications

    DOEpatents

    Gamba, Otto O. M.

    1977-01-01

    A self-supporting portable field multichannel X-ray chemical analyzer system comprising a lightweight, flexibly connected, remotely locatable, radioisotope-excited sensing probe utilizing a cryogenically-cooled solid state semi-conductor crystal detector for fast in situ non-destructive, qualitative and quantitative analysis of elements in solid, powder, liquid or slurried form, utilizing an X-ray energy dispersive spectrometry technique.

  11. Applications of whole field interferometry in mechanics and acoustics

    NASA Astrophysics Data System (ADS)

    Molin, Nils-Erik

    1999-07-01

    A description is given of fringe formation in holographic interferometry, in electronic speckle pattern interferometry, in electro-optic or TV holography and for a newly developed system for pulsed TV-holography. A numerical example, which simulates the equations describing the different techniques, is included. A strain measuring system using defocused digital speckle photography is described. Experiments showing mode shapes of musical instruments, transient bending wave propagation in beams and plates as well as sound pressure fields in air are included.

  12. The Application of Pulsed Field Gel Electrophoresis in Clinical Studies

    PubMed Central

    Parizad, Eskandar Gholami; Valizadeh, Azar

    2016-01-01

    Pulsed-field gel electrophoresis is a method applied in separating large segments of deoxyribonucleotide using an alternating and cross field. In a uniform magnetic field, components larger than 50kb pass a route through the gel and since the movement of DNA (Deoxyribonucleic acid) molecules are in a Zigzag form, separation of DNAs as bands carried out better via gel. PFGE in microbiology is a standard method which is used for typing of bacteria. It is also a very useful tool in epidemiological studies and gene mapping in microbes and mammalian cell, also motivated development of large-insert cloning system such as bacterial and yeast artifical chromosomes. In this method, close and similar species in terms of genetic patterns show alike profiles regarding DNA separation, and those ones which don’t have similarity or are less similar, reveal different separation profiles. So this feature can be used to determine the common species as the prevalence agent of a disease. PFGE can be utilized for monitoring and evaluating different micro-organisms in clinical samples and existing ones in soil and water. This method can also be a reliable and standard method in vaccine preparation. In recent decades, PFGE is highly regarded as a powerful tool in control, prevention and monitoring diseases in different populations. PMID:26894068

  13. Structural investigations of Great Basin geothermal fields: Applications and implications

    SciTech Connect

    Faulds, James E; Hinz, Nicholas H.; Coolbaugh, Mark F

    2010-11-01

    Because fractures and faults are commonly the primary pathway for deeply circulating hydrothermal fluids, structural studies are critical to assessing geothermal systems and selecting drilling targets for geothermal wells. Important tools for structural analysis include detailed geologic mapping, kinematic analysis of faults, and estimations of stress orientations. Structural assessments are especially useful for evaluating geothermal fields in the Great Basin of the western USA, where regional extension and transtension combine with high heat flow to generate abundant geothermal activity in regions having little recent volcanic activity. The northwestern Great Basin is one of the most geothermally active areas in the USA. The prolific geothermal activity is probably due to enhanced dilation on N- to NNE-striking normal faults induced by a transfer of NW-directed dextral shear from the Walker Lane to NW-directed extension. Analysis of several geothermal fields suggests that most systems occupy discrete steps in normal fault zones or lie in belts of intersecting, overlapping, and/or terminating faults. Most fields are associated with steeply dipping faults and, in many cases, with Quaternary faults. The structural settings favoring geothermal activity are characterized by subvertical conduits of highly fractured rock along fault zones oriented approximately perpendicular to the WNW-trending least principal stress. Features indicative of these settings that may be helpful in guiding exploration for geothermal resources include major steps in normal faults, interbasinal highs, groups of relatively low discontinuous ridges, and lateral jogs or terminations of mountain ranges.

  14. Elastomers in mud motors for oil field applications

    SciTech Connect

    Hendrik, J.

    1997-08-01

    Mud motors, the most frequently used downhole drilling motors in modern drilling systems, are described in their application and function. The elastomeric liner in a mud motor acts as a huge continuous seal. Important properties of elastomers such as chemical resistance, fatigue resistance, mechanical strength, abrasion resistance, bonding to steel and processability are discussed. Advantages and disadvantages of NBR, HNBR, FKM, TFEP, and EPDM elastomers for mud motor applications are briefly described. The importance of drilling fluids and their physical and chemical impact on motor elastomers are described. Drilling fluids are categorized in: oil based-, synthetic-, and water based. Results of compatibility tests in the different drilling muds of the presented categories demonstrate the complexity of elastomer development. Elastomers with an equally good performance in all drilling muds are not available. Future developments and improvements are directed towards higher chemical resistance at higher service temperatures. This will be possible only with improved elastomer-to-metal bonding, increased mechanical and better dynamic properties.

  15. A novel structure of multipole field magnets and their applications in uniformizing beam spot at target

    NASA Astrophysics Data System (ADS)

    Guo, Zhen; Tang, Jing-Yu; Yang, Zheng; Wang, Xiang-Qi; Sun, Biao

    2012-11-01

    A novel structure of multipole field magnets is proposed, and it can provide any order either symmetric or anti-symmetric field distribution within a good-field region in a flat rectangular shape with relative field errors of about 1%. Some of these field distributions cannot be obtained by standard multipole magnets but are quite useful in some applications, thanks to the decoupling of the two halves of the magnets by a pair of shielding plates. In addition, the simplified structure compared with the standard one makes the magnet fabrication easier and cost effective. Two-dimensional magnetic field calculations for anti-symmetric sextupole, octupole, decapole and dodecapole fields show that the new types of multipole magnets have good field quality. Three-dimensional magnetic field calculations have confirmed the validity of the two-dimensional calculations. Symmetric field distributions by the simplified multipole field magnets have also been confirmed by two-dimensional field calculations. Two application examples by using numerical simulations are also given to show the effectiveness of simplified multipole field magnets in producing uniform-like beam spots at two different targets with different beam inputs. It is also shown that combinations of the lower order anti-symmetric field magnets - a merit of this magnet structure - are more advantageous than the traditional combination of octupole and dodecapole magnets in beam spot uniformization, besides with cheaper construction and operation costs. The applications of non-standard field distributions such as anti-symmetric sextupole and symmetric octupole field distributions in synchrotrons are to be exploited in the future.

  16. Applications of satellite data relay to problems of field seismology

    NASA Technical Reports Server (NTRS)

    Webster, W. J., Jr.; Miller, W. H.; Whitley, R.; Allenby, R. J.; Dennison, R. T.

    1980-01-01

    A seismic signal processor was developed and tested for use with the NOAA-GOES satellite data collection system. Performance tests on recorded, as well as real time, short period signals indicate that the event recognition technique used is nearly perfect in its rejection of cultural signals and that data can be acquired in many swarm situations with the use of solid state buffer memories. Detailed circuit diagrams are provided. The design of a complete field data collection platform is discussed and the employment of data collection platforms in seismic network is reviewed.

  17. The applicability of Brillouin scattering to flow field diagnostics

    NASA Technical Reports Server (NTRS)

    Laiosa, J.; Lederman, S.

    1979-01-01

    To fill the void between turbulence theory and experiment; particularly in the flow fields consisting of monatomic gases, for example in wind tunnels, means of measuring fluctuating quantities are needed. In the area of density fluctuation measurement, the optical method of Brillouin scattering was suggested. This was based on the theory, that the Brillouin scattered intensity is proportional to a function of density. In this investigation the potential of this method as a diagnostic tool was studied. Here the density fluctuations in gases were sought. Continuous wave lasers and interferometers were used as the primary illuminating source and scattered light filters respectively.

  18. Retroreflector field tracker. [noncontact optical position sensor for space application

    NASA Technical Reports Server (NTRS)

    Wargocki, F. E.; Ray, A. J.; Hall, G. E.

    1984-01-01

    An electrooptical position-measuring instrument, the Retroreflector Field Tracker or RFT, is described. It is part of the Dynamic Augmentation Experiment - a part of the payload of Space Shuttle flight 41-D in Summer 1984. The tracker measures and outputs the position of 23 reflective targets placed on a 32-m solar array to provide data for determination of the dynamics of the lightweight structure. The sensor uses a 256 x 256 pixel CID detector; the processor electronics include three Z-80 microprocessors. A pulsed laser diode illuminator is used.

  19. Application of edge field analysis to a blurred image

    NASA Astrophysics Data System (ADS)

    Matsumoto, Mitsuharu; Hashimoto, Shuji

    2007-02-01

    This paper introduces a method for quasi-motion extraction from a blurred image utilizing edge field analysis (EFA). Exposing a film for a certain time, we can directly photograph the trajectory of the moving object as an edge in a blurred image. As the edge trajectories are not exactly the same but similar to the optical flows, they allow us to treat the edge image as a pseudo-vector field. We define three line integrals in the edge image on closed curve similar to vector analysis. These integrals correspond to three flow primitives of the scene such as the translation, rotation and divergence. As the images, we utilized some images such as the storm, the bottle rocket and a moving object with random patterns. In order to evaluate the proposed method, we conducted the experiments of estimating the eye of the storm, the center of the explosion in terms of bottle rocket, and the centers of the rotation and divergence of the moving object.

  20. Gravitation field algorithm and its application in gene cluster

    PubMed Central

    2010-01-01

    Background Searching optima is one of the most challenging tasks in clustering genes from available experimental data or given functions. SA, GA, PSO and other similar efficient global optimization methods are used by biotechnologists. All these algorithms are based on the imitation of natural phenomena. Results This paper proposes a novel searching optimization algorithm called Gravitation Field Algorithm (GFA) which is derived from the famous astronomy theory Solar Nebular Disk Model (SNDM) of planetary formation. GFA simulates the Gravitation field and outperforms GA and SA in some multimodal functions optimization problem. And GFA also can be used in the forms of unimodal functions. GFA clusters the dataset well from the Gene Expression Omnibus. Conclusions The mathematical proof demonstrates that GFA could be convergent in the global optimum by probability 1 in three conditions for one independent variable mass functions. In addition to these results, the fundamental optimization concept in this paper is used to analyze how SA and GA affect the global search and the inherent defects in SA and GA. Some results and source code (in Matlab) are publicly available at http://ccst.jlu.edu.cn/CSBG/GFA. PMID:20854683

  1. [Application of advanced engineering technologies to medical and rehabilitation fields].

    PubMed

    Fujie, Masakatsu

    2012-07-01

    The words "Japan syndrome" can now be heard increasingly through the media. Facing the approach of an elderly-dominated society, Robot Technology(RT)is expected to play an important role in Japan's medical, rehabilitation, and daily support fields. The industrial robot, which has already spread through the world with a great success in certain isolated environments by doing the work which is specialized for the thing with the hard known characteristic. By comparison, in the medical and rehabilitation fields, environments always change intricately, and individual characteristics differ from person to person. Furthermore, there are many times when a robot will be asked to directly interact with people. Moreover, the relation between a robot and a person turns into a relation which should involve contact flexibly according to a situation, and also turns into a relation which should avoid contact. In our group, we have so far developed practical rehabilitation and medical robots which can respond to difficulties such as environmental change and individual specificity. In developing rehabilitation robots, it is especially important to consider intuitive operability and individual differences. In addition, in developing medical robots, it is important to replace the experimental knowledge of surgeons to the mechanical quantitative properties. In this article, we introduce some practical examples of rehabilitation and medical robots interweaving several detailed technologies we have so far developed. PMID:22790039

  2. [Application of advanced engineering technologies to medical and rehabilitation fields].

    PubMed

    Fujie, Masakatsu

    2012-07-01

    The words "Japan syndrome" can now be heard increasingly through the media. Facing the approach of an elderly-dominated society, Robot Technology(RT)is expected to play an important role in Japan's medical, rehabilitation, and daily support fields. The industrial robot, which has already spread through the world with a great success in certain isolated environments by doing the work which is specialized for the thing with the hard known characteristic. By comparison, in the medical and rehabilitation fields, environments always change intricately, and individual characteristics differ from person to person. Furthermore, there are many times when a robot will be asked to directly interact with people. Moreover, the relation between a robot and a person turns into a relation which should involve contact flexibly according to a situation, and also turns into a relation which should avoid contact. In our group, we have so far developed practical rehabilitation and medical robots which can respond to difficulties such as environmental change and individual specificity. In developing rehabilitation robots, it is especially important to consider intuitive operability and individual differences. In addition, in developing medical robots, it is important to replace the experimental knowledge of surgeons to the mechanical quantitative properties. In this article, we introduce some practical examples of rehabilitation and medical robots interweaving several detailed technologies we have so far developed.

  3. Cost effective spectral sensor solutions for hand held and field applications

    NASA Astrophysics Data System (ADS)

    Reetz, Edgar; Correns, Martin; Notni, Gunther

    2015-05-01

    Optical spectroscopy is without doubt one of the most important non-contact measurement principles. It is used in a wide range of applications from bio-medical to industrial fields. One recent trend is to miniaturize spectral sensors to address new areas of application. The most common spectral sensor type is based on diffraction gratings, while other types are based on micro mechanical systems (MEMS) or filter technologies. The authors represent the opinion that there is a potentially wide spread field of applications for spectrometers, but the market limits the range of applications since they cannot keep up with targeted cost requirements for consumer products. The present article explains an alternative approach for miniature multichannel spectrometer to enhance robustness for hand held field applications at a cost efficient price point.

  4. Planned versus actual outcomes as a result of animal feeding operation decisions for managing phosphorus.

    PubMed

    Cabot, Perry E; Nowak, Pete

    2005-01-01

    The paper explores how decisions made on animal feeding operations (AFOs) influence the management of manure and phosphorus. Variability among these decisions from operation to operation and from field to field can influence the validity of nutrient loss risk assessments. These assessments are based on assumptions that the decision outcomes regarding manure distribution will occur as they are planned. The discrepancy between planned versus actual outcomes in phosphorus management was explored on nine AFOs managing a contiguous set of 210 fields in south-central Wisconsin. A total of 2611 soil samples were collected and multiple interviews conducted to assign phosphorus index (PI) ratings to the fields. Spearman's rank correlation coefficients (r(S)) indicated that PI ratings were less sensitive to soil test phosphorus (STP) levels (r(S) = 0.378), universal soil loss equation (USLE) (r(S) = 0.261), ratings for chemical fertilizer application (r(S) = 0.185), and runoff class (r(S) = -0.089), and more sensitive to ratings for manure application (r(S) = 0.854). One-way ANOVA indicated that mean field STP levels were more homogenous than field PI ratings between AFOs. Kolmogorov-Smirnov (K-S) tests displayed several nonsignificant comparisons for cumulative distribution functions, S(x), of mean STP levels on AFO fields. On the other hand, the K-S tests of S(x) for PI ratings indicated that the majority of these S(x) functions were significantly different between AFOs at or greater than the 0.05 significance level. Interviews suggested multiple reasons for divergence between planned and actual outcomes in managing phosphorus, and that this divergence arises at the strategic, tactical, and operational levels of decision-making.

  5. Vertical Organic Field-Effect Transistors for Integrated Optoelectronic Applications.

    PubMed

    Yu, Hyeonggeun; Dong, Zhipeng; Guo, Jing; Kim, Doyoung; So, Franky

    2016-04-27

    Direct integration of a vertical organic field-effect transistor (VOFET) and an optoelectronic device offers a single stacked, low power optoelectronic VOFET with high aperture ratios. However, a functional optoelectronic VOFET could not be realized because of the difficulty in fabricating transparent source and gate electrodes. Here, we report a VOFET with an on/off ratio up to 10(5) as well as output current saturation by fabricating a transparent gate capacitor consisting of a perforated indium tin oxide (ITO) source electrode, HfO2 gate dielectric, and ITO gate electrode. Effects of the pore size and the pore depth within the porous ITO electrodes on the on/off characteristic of a VOFET are systematically explained in this work. By combining a phosphorescent organic light-emitting diode with an optimized VOFET structure, a vertical organic light-emitting transistor with a luminance on/off ratio of 10(4) can be fabricated.

  6. Vertical Organic Field-Effect Transistors for Integrated Optoelectronic Applications.

    PubMed

    Yu, Hyeonggeun; Dong, Zhipeng; Guo, Jing; Kim, Doyoung; So, Franky

    2016-04-27

    Direct integration of a vertical organic field-effect transistor (VOFET) and an optoelectronic device offers a single stacked, low power optoelectronic VOFET with high aperture ratios. However, a functional optoelectronic VOFET could not be realized because of the difficulty in fabricating transparent source and gate electrodes. Here, we report a VOFET with an on/off ratio up to 10(5) as well as output current saturation by fabricating a transparent gate capacitor consisting of a perforated indium tin oxide (ITO) source electrode, HfO2 gate dielectric, and ITO gate electrode. Effects of the pore size and the pore depth within the porous ITO electrodes on the on/off characteristic of a VOFET are systematically explained in this work. By combining a phosphorescent organic light-emitting diode with an optimized VOFET structure, a vertical organic light-emitting transistor with a luminance on/off ratio of 10(4) can be fabricated. PMID:27082815

  7. FINITE ELEMENT MODEL FOR TIDES AND CURRENTS WITH FIELD APPLICATIONS.

    USGS Publications Warehouse

    Walters, Roy A.

    1988-01-01

    A finite element model, based upon the shallow water equations, is used to calculate tidal amplitudes and currents for two field-scale test problems. Because tides are characterized by line spectra, the governing equations are subjected to harmonic decomposition. Thus the solution variables are the real and imaginary parts of the amplitude of sea level and velocity rather than a time series of these variables. The time series is recovered through synthesis. This scheme, coupled with a modified form of the governing equations, leads to high computational efficiency and freedom from excessive numerical noise. Two test-cases are presented. The first is a solution for eleven tidal constituents in the English Channel and southern North Sea, and three constituents are discussed. The second is an analysis of the frequency response and tidal harmonics for south San Francisco Bay.

  8. Therapeutic Application of Electric Fields in the Injured Nervous System.

    PubMed

    Haan, Niels; Song, Bing

    2014-02-01

    Significance: Nervous system injuries, both in the peripheral nervous system (PNS) and central nervous system are a major cause for pain, loss-of-function, and impairment of daily life. As nervous system injuries commonly heal slowly or incompletely, new therapeutic approaches may be required. Recent Advances: The observation that cultured neurons are able to respond to exogenous electric fields (EFs) by sprouting more neurites and directing growth along the field, along with the presence of endogenous EFs in the developing vertebrate nervous system have led to the suggestion of the use of EFs in a regenerative therapeutic setting. This review discusses the effects of EFs on nervous cells, and their use in the treatment of nervous injuries in the eye, limb nerves, and the spinal cord. Exogenous EFs have been shown to be neuroprotective in various injury models of the eye, including traumatic injury, congenital degenerative retinopathy, and glaucoma. In the PNS, EFs are able to stimulate regrowth and functional recovery in damaged limb nerves. In the spinal cord, axonal regeneration and improved quality of life may be achieved using EF stimulation. Critical Issues: The optimal paradigm for electrical stimulation has not been determined, and the mechanisms behind the effect of EF are still largely unknown. Future Directions: Although the therapeutic use of EFs in the nervous system is still in its infancy, it is a promising therapeutic avenue for otherwise hard to treat injuries. The cellular/molecular mechanisms of such regulation need to be fully investigated, and the efficiency of applied EFs during wound healing needs to be optimized in a systematic approach in both animal models and future clinical trials. PMID:24761356

  9. Multi-field plasma sandpile model in tokamaks and applications

    NASA Astrophysics Data System (ADS)

    Peng, X. D.; Xu, J. Q.

    2016-08-01

    A multi-field sandpile model of tokamak plasmas is formulated for the first time to simulate the dynamic process with interaction between avalanche events on the fast/micro time-scale and diffusive transports on the slow/macro time-scale. The main characteristics of the model are that both particle and energy avalanches of sand grains are taken into account simultaneously. New redistribution rules of a sand-relaxing process are defined according to the transport properties of special turbulence which allows the uphill particle transport. Applying the model, we first simulate the steady-state plasma profile self-sustained by drift wave turbulences in the Ohmic discharge of a tokamak. A scaling law as f = a q0 b + c for the relation of both center-density n ( 0 ) and electron (ion) temperatures T e ( 0 ) ( T i ( 0 ) ) with the center-safety-factor q 0 is found. Then interesting work about the nonlocal transport phenomenon observed in tokamak experiments proceeds. It is found that the core electron temperature increases rapidly in response to the edge cold pulse and inversely it decreases in response to the edge heat pulse. The results show that the nonlocal response of core electron temperature depending on the amplitudes of background plasma density and temperature is more remarkable in a range of gas injection rate. Analyses indicate that the avalanche transport caused by plasma drift instabilities with thresholds is a possible physical mechanism for the nonlocal transport in tokamaks. It is believed that the model is capable of being applied to more extensive questions occurring in the transport field.

  10. ISOTHERMAL PHASE TRANSFORMATION CYCLING IN STEEL BY APPLICATION OF A HIGH MAGNETIC FIELD

    SciTech Connect

    Ludtka, Gerard Michael; Jaramillo, Roger A; Ludtka, Gail Mackiewicz-; Kisner, Roger A; Wilgen, John B

    2007-01-01

    A phase transformation reversal via the application and removal of a large magnetic field was investigated. Because a large magnetic field can alter the phase equilibrium between paramagnetic austenite and ferromagnetic ferrite, volume fractions for each phase constituent can be modified at constant temperature by changing the magnetic field strength. In this research elevated temperature isothermal hold experiments were performed for 5160 steel. During the isothermal hold, the magnetic field was cycled between 0 and 30 Tesla. As companion experiments, temperature cycling and isothermal holds were performed without magnetic fields. The resulting microstructures were examined using optical and SEM metallography. These microstructures indicate that a portion of the microstructure experiences isothermal transformation cycling between austenite and ferrite due to the application and removal of the 30T (Tesla) magnetic field.

  11. Inhibition and recovery of continuous electric field application on the activity of anammox biomass.

    PubMed

    Qiao, Sen; Yin, Xin; Zhou, Jiti; Furukawa, Kenji

    2014-07-01

    In this study, the effects of electric field on the activity of anammox biomass were investigated. In batch mode, experimental results demonstrated that the nitrogen removal rate enhanced by 25.6 % compared with the control experiment at the electric field of 2 V/cm with application time of 20 min. However, continuous application (24 h) of electric field impacted a mal-effect on anammox biomass during the intensity between 1 and 4 V/cm. After the electric field was removed, the activity of anammox biomass could recover within 2 weeks. This implied that the mal-effect of electric field on anammox biomass was reversible. The decrease of heme c contents and crude enzyme activity demonstrated to be the main reason for the depress of the anammox biomass activity. Transmission electron microscope observation also proved the morphological change of anammox biomass under electric field.

  12. Generation of half-space sound fields with application to personal sound systems.

    PubMed

    Poletti, M A; Fazi, F M

    2016-03-01

    A method is presented for generating a sound field that is significantly attenuated over half of the reproduction region, which has application to the generation of two independent sound fields for two listeners. The half-space sound field is produced by attenuating the negative or positive modes in the cylindrical or spherical expansion of a plane wave or point source sound field. It is shown that this is equivalent to adding to the original sound field, in quadrature, a second field which is the Hilbert transform of the original field. The resulting analytic field has a small magnitude in one half of the plane. Methods are presented for controlling the attenuation in the unwanted half-space. Finally, a simulation is presented showing the generation of a wideband pulse that propagates across half of the area within a circular array of sources.

  13. Generation of half-space sound fields with application to personal sound systems.

    PubMed

    Poletti, M A; Fazi, F M

    2016-03-01

    A method is presented for generating a sound field that is significantly attenuated over half of the reproduction region, which has application to the generation of two independent sound fields for two listeners. The half-space sound field is produced by attenuating the negative or positive modes in the cylindrical or spherical expansion of a plane wave or point source sound field. It is shown that this is equivalent to adding to the original sound field, in quadrature, a second field which is the Hilbert transform of the original field. The resulting analytic field has a small magnitude in one half of the plane. Methods are presented for controlling the attenuation in the unwanted half-space. Finally, a simulation is presented showing the generation of a wideband pulse that propagates across half of the area within a circular array of sources. PMID:27036266

  14. 75 FR 51258 - Boott Hydropower, Inc.; Eldred L Field Hydroelectric Facility Trust; Notice of Application for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-19

    ... Energy Regulatory Commission Boott Hydropower, Inc.; Eldred L Field Hydroelectric Facility Trust; Notice... No.: 2790-055. c. Date Filed: July 6, 2010. d. Applicant: Boott Hydropower, Inc. and Eldred L Field... Hydropower, Inc., One Tech Drive, Suite 220, Andover, MA 01810. Tel: (978) 681-1900 Ext 809. i. FERC...

  15. Field scale evaluation of spray drift reduction technologies from ground and aerial application systems

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The objective of this work is to evaluate a proposed Test Plan for the validation testing of pesticide spray drift reduction technologies for row and field crops, focusing on the testing of ground and aerial application systems under full-scale field evaluations. The measure of performance for a gi...

  16. A measurement system applicable for landslide experiments in the field.

    PubMed

    Guo, Wen-Zhao; Xu, Xiang-Zhou; Wang, Wen-Long; Yang, Ji-Shan; Liu, Ya-Kun; Xu, Fei-Long

    2016-04-01

    Observation of gravity erosion in the field with strong sunshine and wind poses a challenge. Here, a novel topography meter together with a movable tent addresses the challenge. With the topography meter, a 3D geometric shape of the target surface can be digitally reconstructed. Before the commencement of a test, the laser generator position and the camera sightline should be adjusted with a sight calibrator. Typically, the topography meter can measure the gravity erosion on the slope with a gradient of 30°-70°. Two methods can be used to obtain a relatively clear video, despite the extreme steepness of the slopes. One method is to rotate the laser source away from the slope to ensure that the camera sightline remains perpendicular to the laser plane. Another way is to move the camera farther away from the slope in which the measured volume of the slope needs to be corrected; this method will reduce distortion of the image. In addition, installation of tent poles with concrete columns helps to surmount the altitude difference on steep slopes. Results observed by the topography meter in real landslide experiments are rational and reliable.

  17. A measurement system applicable for landslide experiments in the field.

    PubMed

    Guo, Wen-Zhao; Xu, Xiang-Zhou; Wang, Wen-Long; Yang, Ji-Shan; Liu, Ya-Kun; Xu, Fei-Long

    2016-04-01

    Observation of gravity erosion in the field with strong sunshine and wind poses a challenge. Here, a novel topography meter together with a movable tent addresses the challenge. With the topography meter, a 3D geometric shape of the target surface can be digitally reconstructed. Before the commencement of a test, the laser generator position and the camera sightline should be adjusted with a sight calibrator. Typically, the topography meter can measure the gravity erosion on the slope with a gradient of 30°-70°. Two methods can be used to obtain a relatively clear video, despite the extreme steepness of the slopes. One method is to rotate the laser source away from the slope to ensure that the camera sightline remains perpendicular to the laser plane. Another way is to move the camera farther away from the slope in which the measured volume of the slope needs to be corrected; this method will reduce distortion of the image. In addition, installation of tent poles with concrete columns helps to surmount the altitude difference on steep slopes. Results observed by the topography meter in real landslide experiments are rational and reliable. PMID:27131688

  18. Application of polarizable ellipsoidal force field model to pnicogen bonds.

    PubMed

    Liu, Fang; Du, Likai; Gao, Jun; Wang, Lili; Song, Bo; Liu, Chengbu

    2015-03-15

    Noncovalent interactions, such as hydrogen bonds and halogen bonds, are frequently used in drug designing and crystal engineering. Recently, a novel noncovalent pnicogen bonds have been identified as an important driving force in crystal structures with similar bonding mechanisms as hydrogen bond and halogen bond. Although the pnicogen bond is highly anisotropic, the pnicogen bond angles range from 160° to 180° due to the complicated substituent effects. To understand the anisotropic characters of pnicogen bond, a modification of the polarizable ellipsoidal force field (PEff) model previously used to define halogen bonds was proposed in this work. The potential energy surfaces (PESs) of mono- and polysubstituted PH3 -NH3 complexes were calculated at CCSD(T), MP2, and density functional theory levels and were used to examine the modified PEff model. The results indicate that the modified PEff model can precisely characterize pnicogen bond. The root mean squared error of PES obtained with PEff model is less than 0.5 kcal/mol, compared with MP2 results. In addition, the modified PEff model may be applied to other noncovalent bond interactions, which is important to understand the role of intermolecular interactions in the self-assembly structures.

  19. Improved Gravitation Field Algorithm and Its Application in Hierarchical Clustering

    PubMed Central

    Zheng, Ming; Sun, Ying; Liu, Gui-xia; Zhou, You; Zhou, Chun-guang

    2012-01-01

    Background Gravitation field algorithm (GFA) is a new optimization algorithm which is based on an imitation of natural phenomena. GFA can do well both for searching global minimum and multi-minima in computational biology. But GFA needs to be improved for increasing efficiency, and modified for applying to some discrete data problems in system biology. Method An improved GFA called IGFA was proposed in this paper. Two parts were improved in IGFA. The first one is the rule of random division, which is a reasonable strategy and makes running time shorter. The other one is rotation factor, which can improve the accuracy of IGFA. And to apply IGFA to the hierarchical clustering, the initial part and the movement operator were modified. Results Two kinds of experiments were used to test IGFA. And IGFA was applied to hierarchical clustering. The global minimum experiment was used with IGFA, GFA, GA (genetic algorithm) and SA (simulated annealing). Multi-minima experiment was used with IGFA and GFA. The two experiments results were compared with each other and proved the efficiency of IGFA. IGFA is better than GFA both in accuracy and running time. For the hierarchical clustering, IGFA is used to optimize the smallest distance of genes pairs, and the results were compared with GA and SA, singular-linkage clustering, UPGMA. The efficiency of IGFA is proved. PMID:23173043

  20. Transverse dispersion: From laboratory experiments to field applications

    NASA Astrophysics Data System (ADS)

    Grathwohl, Peter; Rügner, Hermann

    2016-04-01

    Transverse dispersion is relevant for dilution of contaminant plumes in groundwater and in many cases controls the length of steady state plumes during natural attenuation. Also dissolution kinetics of NAPLs in porous media and mass transfer of vapor phase compounds across the capillary fringe (e.g. supply of oxygen) is limited by transverse dispersion. In bench scale laboratory experiments typically very small dispersion coefficients are observed. Transverse dispersivities determined in DNAPL pool dissolution experiments in coarse sands are less than 0.1 mm which agrees with results from lab experiments on dilution of tracers and transfer of oxygen across the capillary fringe. Such low dispersivities lead to long-term persistence of DNAPL pools of many decades to centuries which is confirmed e.g. for chlorinated solvents and coal tars by observations at contaminated sites. However, larger scale investigations, e.g. determination of the length of steady state plumes or reduction of mass fluxes of biodegradable compounds suggest that transverse dispersivities at field scale are up to 3 orders of magnitude higher (1 -10 cm). Reasons for this discrepancy are still unclear, but may be partly explained by processes enhancing transverse mixing such as flow focusing due to aquifer geometries or high permeability inclusions and helical groundwater flow induced by herringbone structures in sediments.

  1. [Development and application of electroanalytical methods in biomedical fields].

    PubMed

    Kusu, Fumiyo

    2015-01-01

    To summarize our electroanalytical research in the biomedical field over the past 43 years, this review describes studies on specular reflection measurement, redox potential determination, amperometric acid sensing, HPLC with electrochemical detection, and potential oscillation across a liquid membrane. The specular reflection method was used for clarifying the adsorption of neurotransmitters and their related drugs onto a gold electrode and the interaction between dental alloys and compound iodine glycerin. A voltammetric screening test using a redox potential for the antioxidative effect of flavonoids was proposed. Amperometric acid sensing based on the measurement of the reduction prepeak current of 2-methyl-1,4-naphthoquinone (VK3) or 3,5-di-tert-buty1-1,2-benzoquinone (DBBQ) was applied to determine acid values of fats and oils, titrable acidity of coffee, and enzyme activity of lipase, free fatty acids (FFAs) in serum, short-chain fatty acids in feces, etc. The electrode reactions of phenothiazines, catechins, and cholesterol were applied to biomedical analysis using HPLC with electrochemical detection. A three-channel electrochemical detection system was utilized for the sensitive determination of redox compounds in Chinese herbal medicines. The behavior of barbituric acid derivatives was examined based on potential oscillation measurements.

  2. Chemically bonded phosphate ceramic sealant formulations for oil field applications

    SciTech Connect

    Wagh, Arun S.; Jeong, Seung-Young; McDaniel, Richard

    2008-10-21

    A sealant for an oil or geothermal well capable of setting within about 3 to about 6 hours at temperatures less than about 250.degree. F. for shallow wells less than about 10,000 feet and deep wells greater than about 10,000 feet having MgO present in the range of from about 9.9 to about 14.5%, KH.sub.2PO.sub.4 present in the range of from about 29.7 to about 27.2%, class C fly ash present in the range of from about 19.8 to about 36.3%, class F fly ash present in the range of from about 19.8 to about 0%, boric acid or borax present in the range of from about 0.39 to about 1.45%, and water present in the range of from about 20.3 to about 21.86% by weight of the sealant.A method of sealing wells is disclosed as are compositions for very high temperature wells is disclosed as is a composition for treating oil field wastes.

  3. Active C4 Electrodes for Local Field Potential Recording Applications

    PubMed Central

    Wang, Lu; Freedman, David; Sahin, Mesut; Ünlü, M. Selim; Knepper, Ronald

    2016-01-01

    Extracellular neural recording, with multi-electrode arrays (MEAs), is a powerful method used to study neural function at the network level. However, in a high density array, it can be costly and time consuming to integrate the active circuit with the expensive electrodes. In this paper, we present a 4 mm × 4 mm neural recording integrated circuit (IC) chip, utilizing IBM C4 bumps as recording electrodes, which enable a seamless active chip and electrode integration. The IC chip was designed and fabricated in a 0.13 μm BiCMOS process for both in vitro and in vivo applications. It has an input-referred noise of 4.6 μVrms for the bandwidth of 10 Hz to 10 kHz and a power dissipation of 11.25 mW at 2.5 V, or 43.9 μW per input channel. This prototype is scalable for implementing larger number and higher density electrode arrays. To validate the functionality of the chip, electrical testing results and acute in vivo recordings from a rat barrel cortex are presented. PMID:26861324

  4. Active C4 Electrodes for Local Field Potential Recording Applications.

    PubMed

    Wang, Lu; Freedman, David; Sahin, Mesut; Ünlü, M Selim; Knepper, Ronald

    2016-02-04

    Extracellular neural recording, with multi-electrode arrays (MEAs), is a powerful method used to study neural function at the network level. However, in a high density array, it can be costly and time consuming to integrate the active circuit with the expensive electrodes. In this paper, we present a 4 mm × 4 mm neural recording integrated circuit (IC) chip, utilizing IBM C4 bumps as recording electrodes, which enable a seamless active chip and electrode integration. The IC chip was designed and fabricated in a 0.13 μm BiCMOS process for both in vitro and in vivo applications. It has an input-referred noise of 4.6 μV rms for the bandwidth of 10 Hz to 10 kHz and a power dissipation of 11.25 mW at 2.5 V, or 43.9 μW per input channel. This prototype is scalable for implementing larger number and higher density electrode arrays. To validate the functionality of the chip, electrical testing results and acute in vivo recordings from a rat barrel cortex are presented.

  5. Color Maintenance of LEDs in Laboratory and Field Applications

    SciTech Connect

    Royer, Michael P.; Tuttle, Ralph; Rosenfeld, Scott M.; Miller, Naomi J.

    2013-09-30

    Synopsis: To date, consideration for parametric failure of LED products has largely been focused on lumen maintenance. However, color shift is a cause of early failure for some products, and is especially important to consider in certain applications, like museums, where visual appearance is critical. Example data collected by the GATEWAY program for LED lamps installed in museums shows that many have changed color beyond a reasonable tolerance well before their rated lifetime was reached, necessitating replacement. Similar data collected by the CALiPER program between 2008 and 2010 reveals that many early products shifted beyond acceptable tolerances in as little as a few thousand hours. In contrast, data from the L Prize program illustrates that commercially available LED products can have exemplary color stability that is unmatched by traditional light sources. Beyond presenting data from the aforementioned DOE programs, this report discusses the metrics used for communicating color shift—namely MacAdam ellipses and Δu'v'—as well as providing guidance for end users on how to monitor color shift and what to look for in manufacturer warranties. Also included are descriptions of the physical changes that have been documented as leading to color shift in some example types of LED packages. As with complete products, the data presented herein for LED packages shows that a wide variety of products are available; in order for specifiers and consumers to make educated choices, more detailed and standardized information should be made available.

  6. Shielding Flowers Developing under Stress: Translating Theory to Field Application.

    PubMed

    Chayut, Noam; Sobol, Shiri; Nave, Nahum; Samach, Alon

    2014-01-01

    Developing reproductive organs within a flower are sensitive to environmental stress. A higher incidence of environmental stress during this stage of a crop plants' developmental cycle will lead to major breaches in food security. Clearly, we need to understand this sensitivity and try and overcome it, by agricultural practices and/or the breeding of more tolerant cultivars. Although passion fruit vines initiate flowers all year round, flower primordia abort during warm summers. This restricts the season of fruit production in regions with warm summers. Previously, using controlled chambers, stages in flower development that are sensitive to heat were identified. Based on genetic analysis and physiological experiments in controlled environments, gibberellin activity appeared to be a possible point of horticultural intervention. Here, we aimed to shield flowers of a commercial cultivar from end of summer conditions, thus allowing fruit production in new seasons. We conducted experiments over three years in different settings, and our findings consistently show that a single application of an inhibitor of gibberellin biosynthesis to vines in mid-August can cause precocious flowering of ~2-4 weeks, leading to earlier fruit production of ~1 month. In this case, knowledge obtained on phenology, environmental constraints and genetic variation, allowed us to reach a practical solution. PMID:27135506

  7. Shielding Flowers Developing under Stress: Translating Theory to Field Application

    PubMed Central

    Chayut, Noam; Sobol, Shiri; Nave, Nahum; Samach, Alon

    2014-01-01

    Developing reproductive organs within a flower are sensitive to environmental stress. A higher incidence of environmental stress during this stage of a crop plants’ developmental cycle will lead to major breaches in food security. Clearly, we need to understand this sensitivity and try and overcome it, by agricultural practices and/or the breeding of more tolerant cultivars. Although passion fruit vines initiate flowers all year round, flower primordia abort during warm summers. This restricts the season of fruit production in regions with warm summers. Previously, using controlled chambers, stages in flower development that are sensitive to heat were identified. Based on genetic analysis and physiological experiments in controlled environments, gibberellin activity appeared to be a possible point of horticultural intervention. Here, we aimed to shield flowers of a commercial cultivar from end of summer conditions, thus allowing fruit production in new seasons. We conducted experiments over three years in different settings, and our findings consistently show that a single application of an inhibitor of gibberellin biosynthesis to vines in mid-August can cause precocious flowering of ~2–4 weeks, leading to earlier fruit production of ~1 month. In this case, knowledge obtained on phenology, environmental constraints and genetic variation, allowed us to reach a practical solution. PMID:27135506

  8. Shielding Flowers Developing under Stress: Translating Theory to Field Application.

    PubMed

    Chayut, Noam; Sobol, Shiri; Nave, Nahum; Samach, Alon

    2014-07-11

    Developing reproductive organs within a flower are sensitive to environmental stress. A higher incidence of environmental stress during this stage of a crop plants' developmental cycle will lead to major breaches in food security. Clearly, we need to understand this sensitivity and try and overcome it, by agricultural practices and/or the breeding of more tolerant cultivars. Although passion fruit vines initiate flowers all year round, flower primordia abort during warm summers. This restricts the season of fruit production in regions with warm summers. Previously, using controlled chambers, stages in flower development that are sensitive to heat were identified. Based on genetic analysis and physiological experiments in controlled environments, gibberellin activity appeared to be a possible point of horticultural intervention. Here, we aimed to shield flowers of a commercial cultivar from end of summer conditions, thus allowing fruit production in new seasons. We conducted experiments over three years in different settings, and our findings consistently show that a single application of an inhibitor of gibberellin biosynthesis to vines in mid-August can cause precocious flowering of ~2-4 weeks, leading to earlier fruit production of ~1 month. In this case, knowledge obtained on phenology, environmental constraints and genetic variation, allowed us to reach a practical solution.

  9. Evaluation of Alternative Field Buses for Lighting ControlApplications

    SciTech Connect

    Koch, Ed; Rubinstein, Francis

    2005-03-21

    The Subcontract Statement of Work consists of two major tasks. This report is the Final Report in fulfillment of the contract deliverable for Task 1. The purpose of Task 1 was to evaluate existing and emerging protocols and standards for interfacing sensors and controllers for communicating with integrated lighting control systems in commercial buildings. The detailed task description follows: Task 1. Evaluate alternative sensor/field buses. The objective of this task is to evaluate existing and emerging standards for interfacing sensors and controllers for communicating with integrated lighting control systems in commercial buildings. The protocols to be evaluated will include at least: (1) 1-Wire Net, (2) DALI, (3) MODBUS (or appropriate substitute such as EIB) and (4) ZigBee. The evaluation will include a comparative matrix for comparing the technical performance features of the different alternative systems. The performance features to be considered include: (1) directionality and network speed, (2) error control, (3) latency times, (4) allowable cable voltage drop, (5) topology, and (6) polarization. Specifically, Subcontractor will: (1) Analyze the proposed network architecture and identify potential problems that may require further research and specification. (2) Help identify and specify additional software and hardware components that may be required for the communications network to operate properly. (3) Identify areas of the architecture that can benefit from existing standards and technology and enumerate those standards and technologies. (4) Identify existing companies that may have relevant technology that can be applied to this research. (5) Help determine if new standards or technologies need to be developed.

  10. Applications of effective field theory to electron scattering

    NASA Astrophysics Data System (ADS)

    Diaconescu, Luca Radu

    In this work two calculations are presented. In the first, we compute the vector analyzing power (VAP) for the elastic scattering of transversely polarized electrons from protons at low energies, using an effective theory of electrons, protons, and photons. We study all contributions through second order in E/M, where E and M are the electron energy and nucleon mass, respectively. The leading order VAP arises from the imaginary part of the interference of one- and two-photon exchange amplitudes. Sub-leading contributions are generated by the nucleon magnetic moment and charge radius, as well as recoil corrections to the leading-order amplitude. Working to second order in E/M), we obtain a prediction for A_n that is free of unknown parameters and that agrees with the recent measurement of the VAP in backward angle electron proton scattering. In the second part of this thesis the longitudinal asymmetry due to Z exchange is calculated in quasi-elastic electron-deuteron scattering at momentum transfers |Q^2| of about 0.1 GeV^2 relevant for the SAMPLE experiment. The deuteron and pn scattering-state wave functions are obtained from solutions of a Schrodinger equation with the Argonne v18 potential. Electromagnetic and weak neutral one- and two-nucleon currents are included in the calculation. The two-nucleon currents of pion range are shown to be identical to those derived in Effective Field Theory. The results indicate that two-body contributions to the asymmetry are small (about 0.2%) around the quasi-elastic peak, but become relatively more significant (about 3%) in the high-energy wing of the quasi-elastic peak.

  11. Historical applications of induced sterilisation in field populations of mosquitoes

    PubMed Central

    Dame, David A; Curtis, Christopher F; Benedict, Mark Q; Robinson, Alan S; Knols, Bart GJ

    2009-01-01

    Research on sterile mosquito technology from 1955 to the 1980s provided a substantial body of knowledge on propagation and release of sterile mosquitoes. Radiation sterilisation and chemosterilisation have been used effectively to induce dominant lethality and thereby sterilise important mosquito vectors in the laboratory. Experimental releases of chemosterilised males provided complete control of Anopheles albimanus in a small breeding population (14-15 sq km) in El Salvador. Releases of radiation sterilised males failed to control either Aedes aegypti or Anopheles quadrimaculatus in the USA. Releases of radiation-sterilised and chemosterilised male Culex quinquefasciatus in the USA and India were successful in some instances. Development of genetic sexing systems for Anopheles and improved physical separation methods for Culex have made it possible to rear and release males almost exclusively (> 99%) minimizing the release of potential vectors, the females. Factors that affected efficacy in some field programmes included reduction of competitiveness by radiation, immigration of fertilized females from outside the release zones, and inability of laboratory-bred males to perform in the wild. Despite significant progress, institutional commitments to carry the process further were generally lacking in the late 1970s and until recently. Now, with renewed interest and support for further assessment of this technology, this paper summarizes the current knowledge base, prioritizes some areas of investigation, and challenges scientists and administrators to maintain an awareness of progress, remain realistic about the interpretation of new findings, and make decisions about the sterile insect technique on the basis of informed scientific documentation. Areas recommended for priority research status include the establishment of genetic sexing mechanisms that can be transferred to other mosquito species, re-examination of radiation sterilisation, aerial release technology

  12. Three-dimensional radar imaging techniques and systems for near-field applications

    NASA Astrophysics Data System (ADS)

    Sheen, David M.; Hall, Thomas E.; McMakin, Douglas L.; Jones, A. Mark; Tedeschi, Jonathan R.

    2016-05-01

    The Pacific Northwest National Laboratory has developed three-dimensional holographic (synthetic aperture) radar imaging techniques and systems for a wide variety of near-field applications. These applications include radar crosssection (RCS) imaging, personnel screening, standoff concealed weapon detection, concealed threat detection, throughbarrier imaging, ground penetrating radar (GPR), and non-destructive evaluation (NDE). Sequentially-switched linear arrays are used for many of these systems to enable high-speed data acquisition and 3-D imaging. In this paper, the techniques and systems will be described along with imaging results that demonstrate the utility of near-field 3-D radar imaging for these compelling applications.

  13. Keldysh theory of strong field ionization: history, applications, difficulties and perspectives

    NASA Astrophysics Data System (ADS)

    Popruzhenko, S. V.

    2014-10-01

    The history and current status of the Keldysh theory of strong field ionization are reviewed. The focus is on the fundamentals of the theory, its most important applications and those aspects which still raise difficulties and remain under discussion. The Keldysh theory is compared with other nonperturbative analytic methods of strong field atomic physics and its important generalizations are discussed. Among the difficulties, the gauge invariance problem, the tunneling time concept, the conditions of applicability and the application of the theory to ionization of systems more complex than atoms, including molecules and dielectrics, are considered. Possible prospects for the future development of the theory are also discussed.

  14. Effects of Fipronil Insecticide Application on Sympetrum sp. Larvae and Adults in Experimental Rice Paddy Field

    NASA Astrophysics Data System (ADS)

    Jinguji, Hiroshi; Ueda, Tetsuyuki; Tsunoda, Manami; Aihara, Shoko; Saito, Mitsuo

    The effect of on sowing and before transplanting application of the phenyl pyrazole insecticide, fipronil, on the survivorship Sympetrum spp. was investigated in plots of an experimental rice paddy field. In addition, the effect of two pesticide applications on rice weevils was investigated. A total of nine paddy plots were used in this study: three were treated with fipronil at the before transplanting application , three at the on sowing application, and the three remaining plots were left untreated for use as controls. Fipronil concentrations in paddy water at the time of application in before transplanting and on sowing treatments reached 1.45 and 1.20 μg/L, respectively. A comparison of experimental and control plots revealed a marked absence of Sympetrum frequens larvae, exuviae and adults from fipronil-treated fields. Adult density of Sympetrum sp. and members of Lestidae in paddy fields before transplanting application were considerably lower than in control plots. Our results show that before transplanting application is more effective than on sowing application for treating rice weevils, but that on sowing application may still be harm against dragonflies.

  15. Application of relativistic mean field and effective field theory densities to scattering observables for Ca isotopes

    NASA Astrophysics Data System (ADS)

    Bhuyan, M.; Panda, R. N.; Routray, T. R.; Patra, S. K.

    2010-12-01

    In the framework of relativistic mean field (RMF) theory, we have calculated the density distribution of protons and neutrons for Ca40,42,44,48 with NL3 and G2 parameter sets. The microscopic proton-nucleus optical potentials for p+Ca40,42,44,48 systems are evaluated from the Dirac nucleon-nucleon scattering amplitude and the density of the target nucleus using relativistic-Love-Franey and McNeil-Ray-Wallace parametrizations. We have estimated the scattering observables, such as the elastic differential scattering cross section, analyzing power and the spin observables with the relativistic impulse approximation (RIA). The results have been compared with the experimental data for a few selective cases and we find that the use of density as well as the scattering matrix parametrizations are crucial for the theoretical prediction.

  16. Application of relativistic mean field and effective field theory densities to scattering observables for Ca isotopes

    SciTech Connect

    Bhuyan, M.; Panda, R. N.; Routray, T. R.; Patra, S. K.

    2010-12-15

    In the framework of relativistic mean field (RMF) theory, we have calculated the density distribution of protons and neutrons for {sup 40,42,44,48}Ca with NL3 and G2 parameter sets. The microscopic proton-nucleus optical potentials for p+{sup 40,42,44,48}Ca systems are evaluated from the Dirac nucleon-nucleon scattering amplitude and the density of the target nucleus using relativistic-Love-Franey and McNeil-Ray-Wallace parametrizations. We have estimated the scattering observables, such as the elastic differential scattering cross section, analyzing power and the spin observables with the relativistic impulse approximation (RIA). The results have been compared with the experimental data for a few selective cases and we find that the use of density as well as the scattering matrix parametrizations are crucial for the theoretical prediction.

  17. The generation and application of megagauss fields at the Humboldt High Magnetic Field Center

    NASA Astrophysics Data System (ADS)

    Portugall, O.; Puhlmann, N.; Müller, H. U.; Barczewski, M.; Stolpe, I.; Ortenberg, M. von

    1998-05-01

    A new multi-megagauss generator has been constructed which produces 239 and 311 T with a pulse duration of 5 μs in single turn coils with an inner diameter of 10 and 5 mm, respectively. Prominent features of the installation are the vertical coil orientation, a stripline-based lightweight/low inductance discharge circuit in modular arrangement and the galvanic separation of control panels and high-voltage units. The installation is designed as a scientific instrument including suitable cryostats, fast data acquisition systems and basic setups for spectroscopical investigations. The design and performance of the field generator as well as the supplementary equipment are discussed and demonstrated in connection with cyclotron resonance measurements at temperatures down to 5 K.

  18. Passive wick fluxmeters: Design considerations and field applications

    NASA Astrophysics Data System (ADS)

    Gee, G. W.; Newman, B. D.; Green, S. R.; Meissner, R.; Rupp, H.; Zhang, Z. F.; Keller, J. M.; Waugh, W. J.; van der Velde, M.; Salazar, J.

    2009-04-01

    Optimization of water use in agriculture and quantification of percolation from landfills and watersheds require reliable estimates of vadose zone water fluxes. Current technology is limited primarily to lysimeters, which directly measure water flux but are expensive and may in some way disrupt flow, causing errors in the measured drainage. We report on design considerations and field tests of an alternative approach, passive wick fluxmeters, which use a control tube to minimize convergent or divergent flow. Design calculations with a quasi-three-dimensional model illustrate how convergence and divergence can be minimized for a range of soil and climatic conditions under steady state and transient fluxes using control tubes of varying heights. There exists a critical recharge rate for a given wick length, where the fluxmeter collection efficiency is 100% regardless of the height of the control tube. Otherwise, convergent or divergent flow will occur, especially when the control tube height is small. While divergence is eliminated in coarse soils using control tubes, it is reduced but not eliminated in finer soils, particularly for fluxes <100 mm/a. Passive wick fluxmeters were tested in soils ranging from nonvegetated semiarid settings in the United States to grasslands in Germany and rain-fed crops in New Zealand and the South Pacific. Where side-by-side comparisons of drainage were made between passive wick fluxmeters and conventional lysimeters in the United States and Germany, agreement was very good. In semiarid settings, drainage was found to depend upon precipitation distribution, surface soil, topographic relief, and the type and amount of vegetation. In Washington State, United States, soil texture dominated all factors controlling drainage from test landfill covers. As expected, drainage was greatest (>60% annual precipitation) from gravel surfaces and least (no drainage) from silt loam soils. In Oregon and New Mexico, United States, and in New Zealand

  19. Applications of Effective Field Theory Techniques to Jet Physics

    NASA Astrophysics Data System (ADS)

    Freedman, Simon M.

    In this thesis we study jet production at large energies from leptonic collisions. We use the framework of effective theories of Quantum Chromodynamics (QCD) to examine the properties of jets and systematically improve calculations. We first develop a new formulation of soft-collinear effective theory (SCET), the appropriate effective theory for jets. In this formulation, soft and collinear degrees of freedom are described using QCD fields that interact with each other through light-like Wilson lines in external currents. This formulation gives a more intuitive picture of jet processes than the traditional formulation of SCET. In particular, we show how the decoupling of soft and collinear degrees of freedom that occurs at leading order in power counting is explicit to next-to-leading order and likely beyond. We then use this formulation to write the thrust rate in a factorized form at next-to-leading order in the thrust parameter. The rate involves an incomplete sum over final states due to phase space cuts that is enforced by a measurement operator. Subleading corrections require matching onto not only the next-to-next-to leading order SCET operators, but also matching onto subleading measurement operators. We derive the appropriate hard, jet, and soft functions and show they reproduce the expected subleading thrust rate. Next, we renormalize the next-to-leading order dijet operators used for the subleading thrust rate. Constraints on matching coefficients from current conservation and reparametrization invariance are shown. We also discuss the subtleties involved in regulating the infrared divergences of the individual loop diagrams in order to extract the ultraviolet divergences. The results can be used to increase the theoretical precision of the thrust rate. Finally, we study the (exclusive) k_perp and C/A jet algorithms in SCET. Regularizing the virtualites and rapidities of the individual graphs, we are able to write the order(alpha_s) dijet cross section

  20. Applications of Effective Field Theory Techniques to Jet Physics

    NASA Astrophysics Data System (ADS)

    Freedman, Simon M.

    In this thesis we study jet production at large energies from leptonic collisions. We use the framework of effective theories of Quantum Chromodynamics (QCD) to examine the properties of jets and systematically improve calculations. We first develop a new formulation of soft-collinear effective theory (SCET), the appropriate effective theory for jets. In this formulation, soft and collinear degrees of freedom are described using QCD fields that interact with each other through light-like Wilson lines in external currents. This formulation gives a more intuitive picture of jet processes than the traditional formulation of SCET. In particular, we show how the decoupling of soft and collinear degrees of freedom that occurs at leading order in power counting is explicit to next-to-leading order and likely beyond. We then use this formulation to write the thrust rate in a factorized form at next-to-leading order in the thrust parameter. The rate involves an incomplete sum over final states due to phase space cuts that is enforced by a measurement operator. Subleading corrections require matching onto not only the next-to-next-to leading order SCET operators, but also matching onto subleading measurement operators. We derive the appropriate hard, jet, and soft functions and show they reproduce the expected subleading thrust rate. Next, we renormalize the next-to-leading order dijet operators used for the subleading thrust rate. Constraints on matching coefficients from current conservation and reparametrization invariance are shown. We also discuss the subtleties involved in regulating the infrared divergences of the individual loop diagrams in order to extract the ultraviolet divergences. The results can be used to increase the theoretical precision of the thrust rate. Finally, we study the (exclusive) k⊥ and C/A jet algorithms in SCET. Regularizing the virtualities and rapidities of the individual graphs, we are able to write the O(alpha s) dijet cross section as the

  1. Passive wick fluxmeters: Design considerations and field applications

    SciTech Connect

    Gee, Glendon W.; Newman, Brent D.; Green, S. R.; Meissner, R.; Rupp, H.; Zhang, Z. F.; Keller, Jason M.; Waugh, W. J.; van der Velde, M.; Salazar, J.

    2009-04-22

    Optimization of water use in agriculture and quantification of leachate losses from landfills and watersheds require reliable estimates of vadose-zone water fluxes. Current technology is limited primarily to lysimeters, which directly measure water flux but may in some way disrupt flow, causing errors in the measured drainage. We report on design considerations and field tests of passive-wick lysimeters (fluxmeters) that use a control tube to minimize convergent or divergent flow. Design calculations with a quasi-three-dimensional model illustrate how convergence and divergence can be minimized for a range of soil and climatic conditions under steady-state and transient fluxes using control tubes of varying heights. There exists a critical recharge rate for a given wick length, where the recharge is 100% regardless of height of the control tube. Otherwise, convergent or divergent flow will occur, especially when the control tube height is small. While divergence is eliminated in coarse soils using control tubes, it is reduced but not eliminated in finer soils, particularly for flux rates < 100 mm/yr. Passive-wick fluxmeters with 60-cm high control tubes and 60-cm long wicks were tested in soils ranging from non-vegetated semi-arid settings in the USA to grasslands in Germany and rain-fed crops in New Zealand and the South Pacific. Where side-by-side comparisons of drainage were made between passive-wick fluxmeters and conventional lysimeters in the USA and Germany, agreement was very good. In semi-arid settings, drainage was found to depend upon precipitation distribution, surface soil, topographic relief, and the type and amount of vegetation. In Washington State, USA, soil texture dominated all factors controlling drainage from test landfill covers. As expected, drainage was greatest (> 60% annual precipitation) from gravel surfaces and least (no drainage) from silt loam soils. In Oregon and New Mexico, USA, and in New Zealand, drainage showed substantial spatial

  2. Establishing seasonal chronicles of actual evapotranspiration under sloping conditions

    NASA Astrophysics Data System (ADS)

    Zitouna Chebbi, R.; Prévot, L.; Jacob, F.; Voltz, M.

    2012-04-01

    Estimation of daily and seasonal actual evapotranspiration (ETa) is strongly needed for hydrological and agricultural purposes. Although the eddy covariance method is well suited for such estimation of land surface fluxes, this method suffers from limitations when establishing long time series. Missing data are often encountered, resulting from bad meteorological conditions, rejection by quality control tests, power failures… Numerous gap fill techniques have been proposed in the literature but there applicability in sloping conditions is not well known. In order to estimate ETa over long periods (agricultural cycle) on crops cultivated in sloping areas, a pluri-annual experiment was conducted in the Kamech catchment, located in North-eastern Tunisia. This Mediterranean site is characterized by a large heterogeneity in topography, soils and crops. Land surface fluxes were measured using eddy covariance systems. Measurements were collected on the two opposite sides of the Kamech V-shaped catchment, within small fields having slopes steeper than 5%. During three different years, four crops were studied: durum wheat, oat, fava bean and pasture. The topography of the catchment and the wind regime induced upslope and downslope flows over the study fields. In this study, we showed that gap filling of the turbulent fluxes (sensible and latent heat) can be obtained through linear regressions against net radiation. To account for the effect of the topography, linear regressions were calibrated by distinguishing upslope and downslope flows. This significantly improved the quality of the reconstructed data over 30 minute intervals. This gap filling technique also improved the energy balance closure at the daily time scale. As a result, seasonal chronicles of daily ETa throughout the growth cycle of the study crops in the Kamech watershed were established, thus providing useful information about the water use of annual crops in a semi-arid rainfed and hilly area.

  3. Standard Practices for Usage of Inductive Magnetic Field Probes with Application to Electric Propulsion Testing

    NASA Technical Reports Server (NTRS)

    Polzin, Kurt A.; Hill, Carrie S.; Turchi, Peter J.; Burton, Rodney L.; Messer, Sarah; Lovberg, Ralph H.; Hallock, Ashley K.

    2013-01-01

    Inductive magnetic field probes (also known as B-dot probes and sometimes as B-probes or magnetic probes) are often employed to perform field measurements in electric propulsion applications where there are time-varying fields. Magnetic field probes provide the means to measure these magnetic fields and can even be used to measure the plasma current density indirectly through the application of Ampere's law. Measurements of this type can yield either global information related to a thruster and its performance or detailed, local data related to the specific physical processes occurring in the plasma. Results of the development of a standard for B-dot probe measurements are presented, condensing the available literature on the subject into an accessible set of rules, guidelines, and techniques to standardize the performance and presentation of future measurements.

  4. Sound field separation technique based on equivalent source method and its application in nearfield acoustic holography.

    PubMed

    Bi, Chuan-Xing; Chen, Xin-Zhao; Chen, Jian

    2008-03-01

    A technique for separating sound fields using two closely spaced parallel measurement surfaces and based on equivalent source method is proposed. The method can separate wave components crossing two measurement surfaces in opposite directions, which makes nearfield acoustic holography (NAH) applications in a field where there exist sources on the two sides of the hologram surface, in a reverberant field or in a scattered field, possible. The method is flexible in applications, simple in computation, and very easy to implement. The measurement surfaces can be arbitrarily shaped, and they are not restricted to be regular as in the traditional field separation technique. And, because the method performs field separation calculations directly in the spatial domain-not in the wave number domain--it avoids the errors and limitations (the window effects, etc.) associated with the traditional field separation technique based on the spatial Fourier transform method. In the paper, a theoretical description is first given, and the performance of the proposed field separation technique and its application in NAH are then evaluated through experiments.

  5. Hierarchically organized migration fields: the application of higher order factor analysis to population migration tables.

    PubMed

    Clayton, C

    1982-07-01

    "The structure of human geographical systems is often of a hierarchical nature. Population migration systems can usefully be conceptualized as a series of hierarchically related levels of migration fields: the fields at one level nesting within the fields at the next higher level. Such migration fields and the relationships between different levels can be extracted from large population migration origin-destination matrices with the aid of higher order factor analysis." A case study of the western United States illustrating the application of higher order factor analysis to large interaction matrices is presented.

  6. Meteorological field measurements at potential and actual wind turbine sites

    SciTech Connect

    Renne, D.S.; Sandusky, W.F.; Hadley, D.L.

    1982-09-01

    An overview of experiences gained in a meteorological measurement program conducted at a number of locations around the United States for the purpose of site evaluation for wind energy utilization is provided. The evolution of the measurement program from its inception in 1976 to the present day is discussed. Some of the major accomplishments and areas for improvement are outlined. Some conclusions on research using data from this program are presented.

  7. Applicability of the free field Sustained Auditory Attention Ability Test (SAAAT)

    PubMed Central

    Feniman, Mariza Ribeiro; Rissatto, Ariane Cristina Sampaio; Lauris, José Roberto Pereira; Mondelli, Maria Fernanda Capoani Garcia

    2012-01-01

    Summary Introduction: The attention is an underlying neuropsychology function to all the cognitive processes. The auditory deficiency compromises the normal development of the child, modifying diverse auditory abilities, including the attention. Objective: to compare the performance of children in the Test of the Ability of Auditory Attention Support, as for the different forms of application (auricular phones and free field), sort and, application order. Method: 40 children (7 years old) voluntary with typical development had participated, divided in two groups: G1 and G2, composites of 20 children each. The application of the THAAS in the G1 if gave first with auricular phones and after that in free field and the G2 the process was inverse. The evaluation consisted in: specific questionnaire, auditory tests and application of the THAAS. Results: It did not have significant difference how much to the sort. For the THAAS with phones, the G1 presented greater amount of errors of carelessness and total punctuation. For the THAAS in field it had a significant difference of the G2 for the monitoring decrease. How much to the application form, the G1 demonstrated a bigger number of errors when it was used phones. The G2 did not demonstrate difference. Conclusion: It had viability in the application of the THAAS in Free Field, being able to be adopted the same used normative values for the conventional way of evaluation. PMID:25991945

  8. Self-Actualization, Liberalism, and Humanistic Education.

    ERIC Educational Resources Information Center

    Porter, Charles Mack

    1979-01-01

    The relationship between personality factors and political orientation has long been of interest to psychologists. This study tests the hypothesis that there is no significant relationship between self-actualization and liberalism-conservatism. The hypothesis is supported. (Author)

  9. Applications, dosimetry and biological interactions of static and time-varying magnetic fields

    NASA Astrophysics Data System (ADS)

    Tenforde, T. S.

    1988-08-01

    The primary topics of this presentation include: (1) the applications of magnetic fields in research, industry, and medical technologies; (2) mechanisms of interaction of static and time-varying magnetic fields with living systems; (3) human health effects of exposure to static and time-varying magnetic fields in occupational, medical, and residential settings; and (4) recent advances in the dosimetry of extremely-low-frequency electromagnetic fields. The discussion of these topics is centered about two issues of considerable contemporary interest: (1) potential health effects of the fields used in magnetic resonance imaging and in vivo spectroscopy, and (2) the controversial issue of whether exposure to extremely-low-frequency (ELF) electromagnetic fields in the home and workplace leads to an elevated risk of cancer.

  10. Heat conduction in a turbulent magnetic field, with application to solar-wind electrons.

    NASA Technical Reports Server (NTRS)

    Hollweg, J. V.; Jokipii, J. R.

    1972-01-01

    Consideration of random, long-wavelength fluctuations in a turbulent magnetic field, showing that they can appreciably decrease the heat conductivity of a plasma along the magnetic field. In simple cases of interest, the reduction along the average field is approximately by the factor (cos delta theta) squared, where delta theta is the angle of the local magnetic field relative to the average field. Application to solar-wind electrons indicates that this reduction in heat conductivity due to observed fluctuations in the interplanetary magnetic field may be of the order of a factor of 2. This may help to explain recent measurements which indicate a rather low electron heat flux in the solar wind.

  11. Applications of digital holography in visualized measurement of acoustic and flow fields

    NASA Astrophysics Data System (ADS)

    Zhao, Jianlin; Li, Enpu; Sun, Weiwei; Di, Jianglei

    2010-03-01

    Digital holography allows recording the hologram using digitally imaging devices such as CCD, and reconstructing the holographic image by numerically simulating the diffraction of the hologram. Its main advantages are by which one can directly obtain the complex amplitude distribution of the object field, so that more impersonally measure the detail information of the object field, such as the distribution of the refractive index changing in crystals induced by light irradiation, deformation of the object surface, particle distribution, as well as acoustic field, flow field and temperature distribution in air. In this paper, we summarize the principle and some of our experimental results on the applications of digital holography in visualized measurement of acoustic standing wave (acoustic levitation field), plasma plume and water flow (Karman vortex street) fields.

  12. Applications of digital holography in visualized measurement of acoustic and flow fields

    NASA Astrophysics Data System (ADS)

    Zhao, Jianlin; Li, Enpu; Sun, Weiwei; di, Jianglei

    2009-12-01

    Digital holography allows recording the hologram using digitally imaging devices such as CCD, and reconstructing the holographic image by numerically simulating the diffraction of the hologram. Its main advantages are by which one can directly obtain the complex amplitude distribution of the object field, so that more impersonally measure the detail information of the object field, such as the distribution of the refractive index changing in crystals induced by light irradiation, deformation of the object surface, particle distribution, as well as acoustic field, flow field and temperature distribution in air. In this paper, we summarize the principle and some of our experimental results on the applications of digital holography in visualized measurement of acoustic standing wave (acoustic levitation field), plasma plume and water flow (Karman vortex street) fields.

  13. Superconducting Pb stripline resonators in parallel magnetic field and their application for microwave spectroscopy

    NASA Astrophysics Data System (ADS)

    Ebensperger, Nikolaj G.; Thiemann, Markus; Dressel, Martin; Scheffler, Marc

    2016-11-01

    Planar superconducting microwave resonators are key elements in a variety of technical applications and also act as sensitive probes for microwave spectroscopy of various materials of interest in present solid state research. Here superconducting Pb is a suitable material as a basis for microwave stripline resonators. To utilize Pb stripline resonators in a variable magnetic field (e.g. in ESR measurements), the electrodynamics of such resonators in a finite magnetic field has to be fully understood. Therefore we performed microwave transmission measurements (with ample applied power to work in linear response) on superconducting Pb stripline resonators in a variable, parallel magnetic field. We determined surface resistance, penetration depth, as well as real and imaginary parts, {σ }1 and {σ }2, of the complex conductivity of superconducting Pb as a function of a magnetic field. Here we find features reminiscent of those in temperature-dependent measurements, such as a maximum in {σ }1 (coherence peak). At magnetic fields above the critical field of this type-I superconductor we still find a low-loss microwave response, which we assign to remaining superconductivity in the form of filaments within the Pb. Hysteresis effects are found in the quality factor of resonances once the swept magnetic field has exceeded the critical magnetic field. This is due to normal conducting areas that are pinned and can therefore persist in the superconducting phase. Besides zero-field-cooling we show an alternative way to eliminate these even at T\\lt {T}c. Based on our microwave data, we also determine the critical magnetic field and the critical temperature of Pb in a temperature range between 1.6 K and 6.5 K and magnetic fields up to 140 mT, showing good agreement with BCS predictions. We also study a Sn sample in a Pb resonator to demonstrate the applicability of superconducting Pb stripline resonators in the experimental study of other (super-)conducting materials in a

  14. A new high-integrated weak field sensor for automotive applications

    NASA Astrophysics Data System (ADS)

    Thiessen, T.; Prochaska, M.

    2009-05-01

    Especially in the field of automotive applications smart sensor systems for magnetic field sensing face increasing requirements concerning low cost, low power consumption and high magnetic performance. Over the past years AMR sensors play a decisive role in this application area because of their robustness and stability. In the following a high-integrated smart sensor system for magnetic field sensing is presented. A novel approach for the detection of weak magnetic fields is shown, which is based on an AC-excitation of AMR elements. In contrast to common used sensors this concept is based on a nonlinear AMR element without Barber pole construction. By means of this methodology sensitivity as well as temperature and life time stability is significantly improved, while the production costs compared to common-used sensors are reduced. Within this novel approach new signal conditioning algorithms and analog circuit topologies are presented, which are able to meet low offset and low noise requirements.

  15. Tailoring the interplay between electromagnetic fields and nanomaterials toward applications in life sciences: a review

    NASA Astrophysics Data System (ADS)

    del Pino, Pablo

    2014-10-01

    Continuous advances in the field of bionanotechnology, particularly in the areas of synthesis and functionalization of colloidal inorganic nanoparticles with novel physicochemical properties, allow the development of innovative and/or enhanced approaches for medical solutions. Many of the present and future applications of bionanotechnology rely on the ability of nanoparticles to efficiently interact with electromagnetic (EM) fields and subsequently to produce a response via scattering or absorption of the interacting field. The cross-sections of nanoparticles are typically orders of magnitude larger than organic molecules, which provide the means for manipulating EM fields and, thereby, enable applications in therapy (e.g., photothermal therapy, hyperthermia, drug release, etc.), sensing (e.g., surface plasmon resonance, surface-enhanced Raman, energy transfer, etc.), and imaging (e.g., magnetic resonance, optoacoustic, photothermal, etc.). Herein, an overview of the most relevant parameters and promising applications of EM-active nanoparticles for applications in life science are discussed with a view toward tailoring the interaction of nanoparticles with EM fields.

  16. Enhancement of crystal homogeneity of protein crystals under application of an external alternating current electric field

    SciTech Connect

    Koizumi, H.; Uda, S.; Fujiwara, K.; Nozawa, J.; Tachibana, M.; Kojima, K.

    2014-10-06

    X-ray diffraction rocking-curve measurements were performed on tetragonal hen egg white (HEW) lysozyme crystals grown with and without the application of an external alternating current (AC) electric field. The crystal quality was assessed by the full width at half maximum (FWHM) value for each rocking curve. For two-dimensional maps of the FWHMs measured on the 440 and the 12 12 0 reflection, the crystal homogeneity was improved under application of an external electric field at 1 MHz, compared with that without. In particular, the significant improvement of the crystal homogeneity was observed for the 12 12 0 reflection.

  17. The actual citation impact of European oncological research.

    PubMed

    López-Illescas, Carmen; de Moya-Anegón, Félix; Moed, Henk F

    2008-01-01

    This study provides an overview of the research performance of major European countries in the field Oncology, the most important journals in which they published their research articles, and the most important academic institutions publishing them. The analysis was based on Thomson Scientific's Web of Science (WoS) and calculated bibliometric indicators of publication activity and actual citation impact. Studying the time period 2000-2006, it gives an update of earlier studies, but at the same time it expands their methodologies, using a broader definition of the field, calculating indicators of actual citation impact, and analysing new and policy relevant aspects. Findings suggest that the emergence of Asian countries in the field Oncology has displaced European articles more strongly than articles from the USA; that oncologists who have published their articles in important, more general journals or in journals covering other specialties, rather than in their own specialist journals, have generated a relatively high actual citation impact; and that universities from Germany, and--to a lesser extent--those from Italy, the Netherlands, UK, and Sweden, dominate a ranking of European universities based on number of articles in oncology. The outcomes illustrate that different bibliometric methodologies may lead to different outcomes, and that outcomes should be interpreted with care.

  18. Field programmable gate arrays: Evaluation report for space-flight application

    NASA Technical Reports Server (NTRS)

    Sandoe, Mike; Davarpanah, Mike; Soliman, Kamal; Suszko, Steven; Mackey, Susan

    1992-01-01

    Field Programmable Gate Arrays commonly called FPGA's are the newer generation of field programmable devices and offer more flexibility in the logic modules they incorporate and in how they are interconnected. The flexibility, the number of logic building blocks available, and the high gate densities achievable are why users find FPGA's attractive. These attributes are important in reducing product development costs and shortening the development cycle. The aerospace community is interested in incorporating this new generation of field programmable technology in space applications. To this end, a consortium was formed to evaluate the quality, reliability, and radiation performance of FPGA's. This report presents the test results on FPGA parts provided by ACTEL Corporation.

  19. Noninterferometric characterization of partially coherent scalar wave fields and application to scattered light.

    PubMed

    Aruldoss, C K; Dragomir, N M; Roberts, A

    2007-10-01

    We report on the application of a simple propagation-based phase-space tomographic technique to the determination of characteristic projections through the mutual optical intensity and the generalized radiance of a scalar, quasi-monochromatic partially coherent wave field. This method is applied to the reconstruction of the coherence functions of an initially spatially coherent optical wave field that has propagated through a suspension of polystyrene microspheres. As anticipated, we see that the field separates into a ballistic, or unscattered, component and a scattered component with a much shorter coherence length. Good agreement is obtained between experimental results and the results of a model based on a wave-transport equation.

  20. Design Architecture of field-effect transistor with back gate electrode for biosensor application

    NASA Astrophysics Data System (ADS)

    Fathil, M. F. M.; Arshad, M. K. Md.; Hashim, U.; Ruslinda, A. R.; Gopinath, Subash C. B.; M. Nuzaihan M., N.; Ayub, R. M.; Adzhri, R.; Zaki, M.; Azman, A. H.

    2016-07-01

    This paper presents the preparation method of photolithography chrome mask design used in fabrication process of field-effect transistor with back gate biasing based biosensor. Initially, the chrome masks are designed by studying the process flow of the biosensor fabrication, followed by drawing of the actual chrome mask using the AutoCAD software. The overall width and length of the device is optimized at 16 mm and 16 mm, respectively. Fabrication processes of the biosensor required five chrome masks, which included source and drain formation mask, the back gate area formation mask, electrode formation mask, front gate area formation mask, and passivation area formation mask. The complete chrome masks design will be sent for chrome mask fabrication and for future use in biosensor fabrication.

  1. [Effects of reduced nitrogen application and soybean intercropping on nitrogen balance of sugarcane field].

    PubMed

    Liu, Yu; Zhang, Ying; Yang, Wen-ting; Li, Zhi-xian; Guan, Ao-mei

    2015-03-01

    A four-year (2010-2013) field experiment was carried out to explore the effects of three planting patterns (sugarcane, soybean monoculture and sugarcane-soybean 1:2 intercropping) with two nitrogen input levels (300 and 525 kg . hm-2) on soybean nitrogen fixation, sugarcane and soybean nitrogen accumulation, and ammonia volatilization and nitrogen leaching in sugarcane field. The results showed that the soybean nitrogen fixation efficiency (NFE) of sugarcane-soybean inter-cropping was lower than that of soybean monoculture. There was no significant difference in NFE among the treatments with the two nitrogen application rates. The nitrogen application rate and inter-cropping did not remarkably affect nitrogen accumulation of sugarcane and soybean. The ammonia volatilization of the reduced nitrogen input treatment was significantly lower than that of the conventional nitrogen input treatment. Furthermore, there was no significant difference in nitrogen leaching at different nitrogen input levels and among different planting patterns. The sugarcane field nitrogen balance analysis indicated that the nitrogen application rate dominated the nitrogen budget of sugarcane field. During the four-year experiment, all treatments leaved a nitrogen surplus (from 73.10 to 400.03 kg . hm-2) , except a nitrogen deficit of 66.22 kg . hm-2 in 2011 in the treatment of sugarcane monoculture with the reduced nitrogen application. The excessive nitrogen surplus might increase the risk of nitrogen pollution in the field. In conclusion, sugarcane-soybean intercropping with reduced nitrogen application is feasible to practice in consideration of enriching the soil fertility, reducing nitrogen pollution and saving production cost in sugarcane field.

  2. Development and Application of Integrated Optical Sensors for Intense E-Field Measurement

    PubMed Central

    Zeng, Rong; Wang, Bo; Niu, Ben; Yu, Zhanqing

    2012-01-01

    The measurement of intense E-fields is a fundamental need in various research areas. Integrated optical E-field sensors (IOESs) have important advantages and are potentially suitable for intense E-field detection. This paper comprehensively reviews the development and applications of several types of IOESs over the last 30 years, including the Mach-Zehnder interferometer (MZI), coupler interferometer (CI) and common path interferometer (CPI). The features of the different types of IOESs are compared, showing that the MZI has higher sensitivity, the CI has a controllable optical bias, and the CPI has better temperature stability. More specifically, the improvement work of applying IOESs to intense E-field measurement is illustrated. Finally, typical uses of IOESs in the measurement of intense E-fields are demonstrated, including application areas such as E-fields with different frequency ranges in high-voltage engineering, simulated nuclear electromagnetic pulse in high-power electromagnetic pulses, and ion-accelerating field in high-energy physics. PMID:23112663

  3. Simulation of concomitant magnetic fields on fast switched gradient coils used in advanced application of MRI

    NASA Astrophysics Data System (ADS)

    Salinas-Muciño, G.; Torres-García, E.; Hidalgo-Tobon, S.

    2012-10-01

    The process to produce an MR image includes nuclear alignment, RF excitation, spatial encoding, and image formation. To form an image, it is necessary to perform spatial localization of the MR signals, which is achieved using gradient coils. MRI requires the use of gradient coils that generate magnetic fields, which vary linearly with position over the imaging volume. Safety issues have been a motivation to study deeply the relation between the interaction of gradient magnetic field and the peripheral nerve stimulation. In this work is presented a numerical modeling between the concomitant magnetic fields produced by the gradient coils and the electric field induced in a cube with σ conductivity by the gradient field switching in pulse sequences as Eco planar Imaging (EPI), due to this kind of sequence is the most used in advance applications of magnetic resonance imaging as functional MRI, cardiac imaging or diffusion.

  4. Experimental studies of rainbow trout populations exposed to field applications of Roundup herbicide.

    PubMed

    Hildebrand, L D; Sullivan, D S; Sullivan, T P

    1982-01-01

    This paper reports the effects of Roundup herbicide (MON 02139) on rainbow trout viability and behavior in several field experiments at the University of British Columbia Research Forest. Laboratory and field 96-hr LC50 values were similar: 54.8 and 52.0 mg/L. Avoidance-preference data indicated that fish would avoid lethal levels of Roundup. Operational application of Roundup at the recommended field dose of (2.2 kg a.e./ha), as well as 10x and 100x field dose resulted in no mortality to rainbow trout in field streams. Results indicate that operational spraying with this herbicide for weed control should not be detrimental to rainbow trout populations. Improper use or accidental spills of Roundup could be avoided by rainbow trout and should not be lethal if diluted in a moderately-flowing stream.

  5. Near-field three-dimensional radar imaging techniques and applications.

    PubMed

    Sheen, David; McMakin, Douglas; Hall, Thomas

    2010-07-01

    Three-dimensional radio frequency imaging techniques have been developed for a variety of near-field applications, including radar cross-section imaging, concealed weapon detection, ground penetrating radar imaging, through-barrier imaging, and nondestructive evaluation. These methods employ active radar transceivers that operate at various frequency ranges covering a wide range, from less than 100 MHz to in excess of 350 GHz, with the frequency range customized for each application. Computational wavefront reconstruction imaging techniques have been developed that optimize the resolution and illumination quality of the images. In this paper, rectilinear and cylindrical three-dimensional imaging techniques are described along with several application results.

  6. Near-Field Three-Dimensional Radar Imaging Techniques and Applications

    SciTech Connect

    Sheen, David M.; McMakin, Douglas L.; Hall, Thomas E.

    2010-07-01

    Three dimensional radio frequency imaging techniques have been developed for a variety of near field applications including radar cross-section imaging, concealed weapon detection, ground penetrating radar imaging, through-barrier imaging, and non-destructive evaluation. These methods employ active radar transceivers that operate at various frequency ranges covering a wide range from less than 100 MHz to in excess of 350 GHz with the frequency range customized for each application. Computational wavefront reconstruction imaging techniques have been developed that optimize the resolution and illumination quality of the images. In this paper, rectilinear and cylindrical three-dimensional imaging techniques are described along with several application results.

  7. Discovering new events beyond the catalogue—application of empirical matched field processing to Salton Sea geothermal field seismicity

    NASA Astrophysics Data System (ADS)

    Wang, Jingbo; Templeton, Dennise C.; Harris, David B.

    2015-10-01

    Using empirical matched field processing (MFP), we compare 4 yr of continuous seismic data to a set of 195 master templates from within an active geothermal field and identify over 140 per cent more events than were identified using traditional detection and location techniques alone. In managed underground reservoirs, a substantial fraction of seismic events can be excluded from the official catalogue due to an inability to clearly identify seismic-phase onsets. Empirical MFP can improve the effectiveness of current seismic detection and location methodologies by using conventionally located events with higher signal-to-noise ratios as master events to define wavefield templates that could then be used to map normally discarded indistinct seismicity. Since MFP does not require picking, it can be carried out automatically and rapidly once suitable templates are defined. In this application, we extend MFP by constructing local-distance empirical master templates using Southern California Earthquake Data Center archived waveform data of events originating within the Salton Sea Geothermal Field. We compare the empirical templates to continuous seismic data collected between 1 January 2008 and 31 December 2011. The empirical MFP method successfully identifies 6249 additional events, while the original catalogue reported 4352 events. The majority of these new events are lower-magnitude events with magnitudes between M0.2-M0.8. The increased spatial-temporal resolution of the microseismicity map within the geothermal field illustrates how empirical MFP, when combined with conventional methods, can significantly improve seismic network detection capabilities, which can aid in long-term sustainability and monitoring of managed underground reservoirs.

  8. In situ measurement of hydrocarbon fuel concentration near a spark plug in an engine cylinder using the 3.392 µm infrared laser absorption method: application to an actual engine

    NASA Astrophysics Data System (ADS)

    Tomita, Eiji; Kawahara, Nobuyuki; Nishiyama, Atsushi; Shigenaga, Masahiro

    2003-08-01

    An infrared absorption method with a 3.392 µm He-Ne laser was used to determine the hydrocarbon fuel concentration near the spark plug in a spark-ignition engine. Iso-octane was used for the fuel. The pressure and temperature dependence of the molar absorption coefficient was clarified. The molar absorption coefficients of a multi-component fuel such as gasoline were estimated by using the coefficient of each component and considering the mass balance. A sensor was developed and installed in a spark plug, which was substituted in place of an ordinary spark plug in a spark-ignition engine. Light can pass from the sensor through the engine cylinder to measure the fuel concentration. The effects of liquid droplets inside the engine cylinder, mechanical vibrations and other gases such as H2O and CO2 on the measurement accuracy were considered. Four main conclusions were drawn from this study. First, the pressure and temperature effects on the molar absorption coefficient of liquid fuel vapour were determined independently in advance using a constant-volume vessel. The pressure and temperature dependence of the molar absorption coefficient was determined under engine firing conditions. Second, the molar absorption coefficients of a multi-component hydrocarbon fuel such as gasoline were estimated by considering the molar fraction of each component. Third, in situ measurements of the hydrocarbon fuel concentration in an actual engine were obtained using the spark plug sensor and the molar absorption coefficient of iso-octane. The concentration near the spark plug just before ignition was almost in agreement with the mean value that was obtained from the measurement of the flow rate made with a burette, which represented the mean value averaged over many cycles. And fourth, no liquid droplets were observed at near-idling conditions. The effects of other gases, such as CO, CO2 and H2O, can be neglected.

  9. 32 CFR Appendix E to Part 110 - Application of 4-Week Summer Field Training Formula (Sample)

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Formula (Sample) E Appendix E to Part 110 National Defense Department of Defense OFFICE OF THE SECRETARY... COMMUTATION INSTEAD OF UNIFORMS FOR MEMBERS OF THE SENIOR RESERVE OFFICERS' TRAINING CORPS Pt. 110, App. E Appendix E to Part 110—Application of 4-Week Summer Field Training Formula (Sample) Zone I Zone II...

  10. 32 CFR Appendix E to Part 110 - Application of 4-Week Summer Field Training Formula (Sample)

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Formula (Sample) E Appendix E to Part 110 National Defense Department of Defense OFFICE OF THE SECRETARY... COMMUTATION INSTEAD OF UNIFORMS FOR MEMBERS OF THE SENIOR RESERVE OFFICERS' TRAINING CORPS Pt. 110, App. E Appendix E to Part 110—Application of 4-Week Summer Field Training Formula (Sample) Zone I Zone II...

  11. 32 CFR Appendix E to Part 110 - Application of 4-Week Summer Field Training Formula (Sample)

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Formula (Sample) E Appendix E to Part 110 National Defense Department of Defense OFFICE OF THE SECRETARY... COMMUTATION INSTEAD OF UNIFORMS FOR MEMBERS OF THE SENIOR RESERVE OFFICERS' TRAINING CORPS Pt. 110, App. E Appendix E to Part 110—Application of 4-Week Summer Field Training Formula (Sample) Zone I Zone II...

  12. 9 CFR 352.4 - Application for ante-mortem inspection service in the field.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 9 Animals and Animal Products 2 2013-01-01 2013-01-01 false Application for ante-mortem inspection service in the field. 352.4 Section 352.4 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS...

  13. 9 CFR 352.4 - Application for ante-mortem inspection service in the field.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 9 Animals and Animal Products 2 2012-01-01 2012-01-01 false Application for ante-mortem inspection service in the field. 352.4 Section 352.4 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS...

  14. 9 CFR 352.4 - Application for ante-mortem inspection service in the field.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 9 Animals and Animal Products 2 2011-01-01 2011-01-01 false Application for ante-mortem inspection service in the field. 352.4 Section 352.4 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS...

  15. The Biotic Indexing of Water Quality and Its Application to Field Work in Schools and Colleges.

    ERIC Educational Resources Information Center

    Dale, C. R.

    1980-01-01

    Discussed is the biotic indexing of water quality and its application to A-level field work with reference to the Trent Biotic Index and Chandler Score system. These indices are related to the classification of water quality used by the Department of the Environment. Interpretations and limitations of the indices are discussed. (Author/DS)

  16. Application of field-modulated generator systems to dispersed solar thermal electric generation

    NASA Technical Reports Server (NTRS)

    Ramakumar, R.

    1979-01-01

    The state-of-the-art of field modulated generation system (FMGS) is presented, and the application of FMGS to dispersed solar thermal electric generation is discussed. The control and monitoring requirements for solar generation system are defined. A comparison is presented between the FMGS approach and other options and the technological development needs are discussed.

  17. 32 CFR Appendix E to Part 110 - Application of 4-Week Summer Field Training Formula (Sample)

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Formula (Sample) E Appendix E to Part 110 National Defense Department of Defense OFFICE OF THE SECRETARY... COMMUTATION INSTEAD OF UNIFORMS FOR MEMBERS OF THE SENIOR RESERVE OFFICERS' TRAINING CORPS Pt. 110, App. E Appendix E to Part 110—Application of 4-Week Summer Field Training Formula (Sample) Zone I Zone II...

  18. A Field-Portable X-Ray Fluorescence Instrument: Design and Applications

    NASA Astrophysics Data System (ADS)

    Civici, Nikolla

    2007-04-01

    The field portable XRF (FPXRF) spectrometer is composed of a measuring head that holds the detector (Si-PIN) and the excitation sources (Cd-109 and Am-241) and the spectrum acquisition system. The application of this system for the analysis of cultural heritage artifacts will be presented and discussed.

  19. Applicability of models to predict phosphorus losses in drained fields: A review

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Most phosphorus (P) modeling studies of water quality have focused on surface runoff loses. However, a growing number of experimental studies have shown that P loses can occur in drainage water from artificially drained fields. In this review paper, we assess the applicability of nine models to pred...

  20. Image quality criteria for wide-field x-ray imaging applications

    NASA Astrophysics Data System (ADS)

    Thompson, Patrick L.; Harvey, James E.

    1999-10-01

    For staring, wide-field applications, such as a solar x-ray imager, the severe off-axis aberrations of the classical Wolter Type-I grazing incidence x-ray telescope design drastically limits the 'resolution' near the solar limb. A specification upon on-axis fractional encircled energy is thus not an appropriate image quality criterion for such wide-angle applications. A more meaningful image quality criterion would be a field-weighted-average measure of 'resolution.' Since surface scattering effects from residual optical fabrication errors are always substantial at these very short wavelengths, the field-weighted-average half- power radius is a far more appropriate measure of aerial resolution. If an ideal mosaic detector array is being used in the focal plane, the finite pixel size provides a practical limit to this system performance. Thus, the total number of aerial resolution elements enclosed by the operational field-of-view, expressed as a percentage of the n umber of ideal detector pixels, is a further improved image quality criterion. In this paper we describe the development of an image quality criterion for wide-field applications of grazing incidence x-ray telescopes which leads to a new class of grazing incidence designs described in a following companion paper.

  1. Realizing actual feedback control of complex network

    NASA Astrophysics Data System (ADS)

    Tu, Chengyi; Cheng, Yuhua

    2014-06-01

    In this paper, we present the concept of feedbackability and how to identify the Minimum Feedbackability Set of an arbitrary complex directed network. Furthermore, we design an estimator and a feedback controller accessing one MFS to realize actual feedback control, i.e. control the system to our desired state according to the estimated system internal state from the output of estimator. Last but not least, we perform numerical simulations of a small linear time-invariant dynamics network and a real simple food network to verify the theoretical results. The framework presented here could make an arbitrary complex directed network realize actual feedback control and deepen our understanding of complex systems.

  2. Optoelectrofluidic field separation based on light-intensity gradients and its applications

    NASA Astrophysics Data System (ADS)

    Yoon, Jinsung; Lee, Sanghyun; Kang, Kwan Hyoung

    2010-11-01

    Optoelectrofluidic field separation (OEFS) of particles under light-intensity gradient (LIG) is reported, where the LIG illumination on the photoconductive layer converts the short-ranged dielectrophoresis (DEP) force to the long-ranged one. The long-ranged DEP force can compete with the hydrodynamic force by alternating current electro-osmosis (ACEO) over the entire illumination area for realizing effective field separation of particles. Results of the field separation and concentration of diverse particle pairs (0.82--16 μm) are well demonstrated, and conditions determining the critical radius and effective particle manipulation are discussed. In addition, expanding the OEFS to biological applications such as rapid cell manipulation and separation will be discussed. The OEFS with LIG strategy could be a promising manipulation method of particles including biological cells in many applications where a rapid manipulation of particles over the entire working area is of interest.

  3. Field Application of Entomopathogenic Nematodes for Control of Delia radicum in Collards

    PubMed Central

    Simser, Dave

    1992-01-01

    Control of Delia radicum (cabbage maggot) in field collards (Brassica oleracea) was compared after one or two applications of entomopathogenic nematodes, Steinernema carpocapsae (All strain) and Heterorhabditis bacterophora (HP88 strain), a single application of granular chlorpyrifos, and a water-only treatment. Nematodes were applied with a sprayer during the egg stage of first-generation D. radicum, and chlorpyrifos was hand placed around collard stems during the same period. A second nematode application was made 10 days later. Chlorpyrifos treatment resulted in fewer puparia per plant, less root damage and higher yield than all other treatments, including the control. Collard yield from nematode-treated beds did not differ from controls. These data indicate that, under these field conditions, the species or strains of entomopathogenic nematodes tested did not reduce the number of active cabbage maggots, nor did they prevent collard root damage. PMID:19283012

  4. Applications of three-dimensional printing technology in the cardiovascular field.

    PubMed

    Shi, Di; Liu, Kai; Zhang, Xin; Liao, Hang; Chen, Xiaoping

    2015-10-01

    Three-dimensional (3-D) printing technology has rapidly developed in the last few decades. Meanwhile, the application of this technology has reached beyond the engineering field and expanded to almost all disciplines, including medicine. There has been much research on the medical applications of 3-D printing in neurosurgery, orthopedics, maxillofacial surgery, plastic surgery, tissue engineering, as well as other fields. Because of the complexity of the cardiovascular system, the application of this technology is limited and difficult, as compared to other disciplines, and thus there is much room for future development. Many of the difficulties associated with this technology must be overcome. Nonetheless, there is no doubt that 3-D printing technology will benefit patients with cardiovascular diseases in the near future. PMID:26220346

  5. Sparse Geologic Dictionaries for Flexible and Low-Rank Subsurface Flow Model Calibration: Field Applications

    NASA Astrophysics Data System (ADS)

    Khaninezhad, M. R. M.; Jafarpour, B.

    2014-12-01

    Inference of spatially distributed reservoir and aquifer properties from scattered and spatially limited data poses a poorly constrained nonlinear inverse problem that can have many solutions. In particular, the uncertainty in the geologic continuity model can remarkably degrade the quality of fluid displacement predictions, hence, the efficiency of resource development plans. For model calibration, instead of estimating aquifer properties for each grid cell in the model, the sparse representation of the aquifer properties is estimated from nonlinear production data. The resulting calibration problem can be solved using recent developments in sparse signal processing, widely known as compressed sensing. This novel formulation leads to a sparse data inversion technique that effectively searches for relevant geologic patterns that can explain the available spatiotemporal data. We recently introduced a new model calibration framework by using sparse geologic dictionaries that are constructed from uncertain prior geologic models. Here, we first demonstrate the effectiveness of the proposed sparse geologic dictionaries for flexible and robust model calibration under prior geologic uncertainty. We illustrate the effectiveness of the proposed approach in using limited nonlinear production data to identify a consistent geologic scenario from a number of candidate scenarios, which is usually a challenging problem in geostatistical reservoir characterization. We then evaluate the feasibility of adopting this framework for field application. In particular, we present subsurface field model calibration applications in which sparse geologic dictionaries are learned from uncertain prior information on large-scale reservoir property descriptions. We consider two large-scale field case studies, the Brugges and the Norne field examples. We discuss the construction of geologic dictionaries for large-scale problems and present reduced-order methods to speed up the computational

  6. High field volume coil with unbalance current distribution for MRI applications of rodents

    NASA Astrophysics Data System (ADS)

    Marrufo, O. R.; Hernández, J.; Rodríguez, A. O.

    2010-12-01

    The development of transceiver volume coils for high field MRI is still a very dynamic field of investigation and development Temnikov has been recently proposed a new volume coil design, similar to the to the gradiometer coil. It is also claimed that it is possible to individually tune it with a single chip capacitor. This motivated the development of a coil prototype based on this idea for whole-body MRI of rodents at 7 Tesla. Electromagnetic simulations of the RF field generated by this coil design were previously performed to study its properties. Electromagnetic simulations were also conducted for a standard birdcage coil with similar dimensions for fare comparison. In all numerical simulations, an unbalanced currents distribution was assumed by applying half the current intensity to designated legs. This coil design operated in the transceiver mode and was linear-driven. The coil size was manufactured to accommodate small rodents. Numerical simulations showed a field uniformity improvement of our coil over the standard birdcage coil. A popular birdcage coil was also constructed to compare their performances. Phantom and rat images were acquired for both volume coils to prove the viability of this coil design for high field MRI applications and standard spin echo pulse sequences Thus, these preliminary results make this coil design a good candidate for MRI and MRS applications of high magnetic fields.

  7. Direct design of two freeform optical surfaces for wide field of view line imaging applications

    NASA Astrophysics Data System (ADS)

    Nie, Yunfeng; Thienpont, Hugo; Duerr, Fabian

    2016-04-01

    In this paper, we propose a multi-fields direct design method aiming to calculate two freeform surfaces with an entrance pupil incorporated for wide field of view on-axis line imaging applications. Both infinite and finite conjugate objectives can be designed with this approach. Since a wide angle imaging system requires more than few discrete perfect imaging points, the multi-fields design approach is based on partial coupling of multiple fields, which guarantees a much more balanced imaging performance over the full field of view. The optical path lengths (OPLs) and image points of numerous off-axis fields are calculated during the procedure, thus very few initial parameters are needed. The procedure to calculate such a freeform lens is explained in detail. We have designed an exemplary monochromatic single lens to demonstrate the functionality of the design method. A rotationally symmetric counterpart following the same specifications is compared in terms of RMS spot radius to demonstrate the clear benefit that freeform lens brings to on-axis line imaging systems. In addition, a practical achromatic wide angle objective is designed by combining our multi-fields design method with classic optical design strategies, serving as a very good starting point for further optimization in a commercial optical design program. The results from the perspective of aberrations plots and MTF values show a very good and well balanced performance over the full field of view.

  8. Prototyping a large field size IORT applicator for a mobile linear accelerator

    NASA Astrophysics Data System (ADS)

    Janssen, Rogier W. J.; Faddegon, Bruce A.; Dries, Wim J. F.

    2008-04-01

    The treatment of large tumors such as sarcomas with intra-operative radiotherapy using a Mobetron® is often complicated because of the limited field size of the primary collimator and the available applicators (max Ø100 mm). To circumvent this limitation a prototype rectangular applicator of 80 × 150 mm2 was designed and built featuring an additional scattering foil located at the top of the applicator. Because of its proven accuracy in modeling linear accelerator components the design was based on the EGSnrc Monte Carlo simulation code BEAMnrc. First, the Mobetron® treatment head was simulated both without an applicator and with a standard 100 mm applicator. Next, this model was used to design an applicator foil consisting of a rectangular Al base plate covering the whole beam and a pyramid of four stacked cylindrical slabs of different diameters centered on top of it. This foil was mounted on top of a plain rectangular Al tube. A prototype was built and tested with diode dosimetry in a water tank. Here, the prototype showed clinically acceptable 80 × 150 mm2 dose distributions for 4 MeV, 6 MeV and 9 MeV, obviating the use of complicated multiple irradiations with abutting field techniques. In addition, the measurements agreed well with the MC simulations, typically within 2%/1 mm.

  9. Developing Human Resources through Actualizing Human Potential

    ERIC Educational Resources Information Center

    Clarken, Rodney H.

    2012-01-01

    The key to human resource development is in actualizing individual and collective thinking, feeling and choosing potentials related to our minds, hearts and wills respectively. These capacities and faculties must be balanced and regulated according to the standards of truth, love and justice for individual, community and institutional development,…

  10. [Actual diet of patients with gastrointestinal diseases].

    PubMed

    Loranskaia, T I; Shakhovskaia, A K; Pavliuchkova, M S

    2000-01-01

    The study of actual nutrition of patients with erosive-ulcerative lesions in the gastroduodenal zone and of patients with operated ulcer has revealed defects in intake of essential nutrients by these patients: overeating of animal fat and refined carbohydrates, deficiency of oil, vitamins A, B2, C, D and food fibers.

  11. Humanistic Education and Self-Actualization Theory.

    ERIC Educational Resources Information Center

    Farmer, Rod

    1984-01-01

    Stresses the need for theoretical justification for the development of humanistic education programs in today's schools. Explores Abraham Maslow's hierarchy of needs and theory of self-actualization. Argues that Maslow's theory may be the best available for educators concerned with educating the whole child. (JHZ)

  12. Group Counseling for Self-Actualization.

    ERIC Educational Resources Information Center

    Streich, William H.; Keeler, Douglas J.

    Self-concept, creativity, growth orientation, an integrated value system, and receptiveness to new experiences are considered to be crucial variables to the self-actualization process. A regular, year-long group counseling program was conducted with 85 randomly selected gifted secondary students in the Farmington, Connecticut Public Schools. A…

  13. Teenagers' Perceived and Actual Probabilities of Pregnancy.

    ERIC Educational Resources Information Center

    Namerow, Pearila Brickner; And Others

    1987-01-01

    Explored adolescent females' (N=425) actual and perceived probabilities of pregnancy. Subjects estimated their likelihood of becoming pregnant the last time they had intercourse, and indicated the dates of last intercourse and last menstrual period. Found that the distributions of perceived probability of pregnancy were nearly identical for both…

  14. Modification of hydrological properties in a fine textured soil following field application of pelletized biochar: investigation of the mechanism involved.

    NASA Astrophysics Data System (ADS)

    Costanza Andrenelli, Maria; Mocali, Stefano; Pellegrini, Sergio; Vignozzi, Nadia

    2016-04-01

    The application of pelletized biochar is seldom employed in field, and its effect on soil hydrological behaviour scarcely investigated. Biochar is usually added in powdered or granular form to improve the homogeneity of distribution, meanwhile favouring its interaction with soil matrix. In this study we evaluated the possibility of applying pelletized biochar as soil conditioner to enhance, during a single cropping season, the hydrological behaviour of a silty clay loam soil prone to structure degradation. For that purpose, the water retention curves (WRCs) were determined on undisturbed soil samples (0-15 cm) three months after the addition, at the rate of 14 Mg ha-1, of two differently pyrolyzed biochars (B1 and B2). Starting from the WRCs the pore size distribution was determined. The gravimetric water content at both field capacity (-10 kPa) and wilting point (-1,500 kPa) was also measured on biochar samples to assess their available water capacity (AWC). In both the treatments, soil bulk density (BD) was significantly lower compared to control, apparently as direct consequence of the addition of low density pellets. Actually, excluding the intrinsic biochar porosity from soil bulk density calculation, BD values of the treated soils remain lower of around 10% over control. Such findings suggest that a modification of soil structural characteristics might have been induced by pellet addition. Data of the WRCs indicate a significant increase of transmission (500-50 micron), storage (50-0.5 micron) and AWC pores (30-0.2 micron) in the amended soils. The two biochars affected the AWC by direct pore contribution, but the extent of such effect was related to the biochar type: the tested pelletized biomass seems to have positive effects provided that the pyrolysis temperature does not exceed 800°C, as in the case of B1. The overall hydrological improvement might be correlated to both the inherent biochar retention capacity and a merely mechanical process of

  15. Modification of hydrological properties in a fine textured soil following field application of pelletized biochar: investigation of the mechanism involved.

    NASA Astrophysics Data System (ADS)

    Costanza Andrenelli, Maria; Mocali, Stefano; Pellegrini, Sergio; Vignozzi, Nadia

    2016-04-01

    The application of pelletized biochar is seldom employed in field, and its effect on soil hydrological behaviour scarcely investigated. Biochar is usually added in powdered or granular form to improve the homogeneity of distribution, meanwhile favouring its interaction with soil matrix. In this study we evaluated the possibility of applying pelletized biochar as soil conditioner to enhance, during a single cropping season, the hydrological behaviour of a silty clay loam soil prone to structure degradation. For that purpose, the water retention curves (WRCs) were determined on undisturbed soil samples (0-15 cm) three months after the addition, at the rate of 14 Mg ha‑1, of two differently pyrolyzed biochars (B1 and B2). Starting from the WRCs the pore size distribution was determined. The gravimetric water content at both field capacity (-10 kPa) and wilting point (-1,500 kPa) was also measured on biochar samples to assess their available water capacity (AWC). In both the treatments, soil bulk density (BD) was significantly lower compared to control, apparently as direct consequence of the addition of low density pellets. Actually, excluding the intrinsic biochar porosity from soil bulk density calculation, BD values of the treated soils remain lower of around 10% over control. Such findings suggest that a modification of soil structural characteristics might have been induced by pellet addition. Data of the WRCs indicate a significant increase of transmission (500-50 micron), storage (50-0.5 micron) and AWC pores (30-0.2 micron) in the amended soils. The two biochars affected the AWC by direct pore contribution, but the extent of such effect was related to the biochar type: the tested pelletized biomass seems to have positive effects provided that the pyrolysis temperature does not exceed 800°C, as in the case of B1. The overall hydrological improvement might be correlated to both the inherent biochar retention capacity and a merely mechanical process of

  16. A highly sensitive CMOS digital Hall sensor for low magnetic field applications.

    PubMed

    Xu, Yue; Pan, Hong-Bin; He, Shu-Zhuan; Li, Li

    2012-01-01

    Integrated CMOS Hall sensors have been widely used to measure magnetic fields. However, they are difficult to work with in a low magnetic field environment due to their low sensitivity and large offset. This paper describes a highly sensitive digital Hall sensor fabricated in 0.18 μm high voltage CMOS technology for low field applications. The sensor consists of a switched cross-shaped Hall plate and a novel signal conditioner. It effectively eliminates offset and low frequency 1/f noise by applying a dynamic quadrature offset cancellation technique. The measured results show the optimal Hall plate achieves a high current related sensitivity of about 310 V/AT. The whole sensor has a remarkable ability to measure a minimum ± 2 mT magnetic field and output a digital Hall signal in a wide temperature range from -40 °C to 120 °C.

  17. A Highly Sensitive CMOS Digital Hall Sensor for Low Magnetic Field Applications

    PubMed Central

    Xu, Yue; Pan, Hong-Bin; He, Shu-Zhuan; Li, Li

    2012-01-01

    Integrated CMOS Hall sensors have been widely used to measure magnetic fields. However, they are difficult to work with in a low magnetic field environment due to their low sensitivity and large offset. This paper describes a highly sensitive digital Hall sensor fabricated in 0.18 μm high voltage CMOS technology for low field applications. The sensor consists of a switched cross-shaped Hall plate and a novel signal conditioner. It effectively eliminates offset and low frequency 1/f noise by applying a dynamic quadrature offset cancellation technique. The measured results show the optimal Hall plate achieves a high current related sensitivity of about 310 V/AT. The whole sensor has a remarkable ability to measure a minimum ±2 mT magnetic field and output a digital Hall signal in a wide temperature range from −40 °C to 120 °C. PMID:22438758

  18. Strong stretching theory for diblock copolymers in thin films under application of electric fields.

    PubMed

    Harrach, Michael F; Heckmann, Marianne; Drossel, Barbara

    2012-07-28

    We investigate the microphases of asymmetric AB diblock copolymers confined to thin films in the strong segregation limit under the application of electric fields. We evaluate the free energy of a given set of possible phases and present phase diagrams for diblock copolymers with a cylindrical bulk phase in dependence of the film thickness and the attraction between the confining walls and the A or B monomers. This is done for different field strengths and volume fractions. We find that with increasing field strength structures show a preference for alignment with the field. The alignment is stronger when the permittivity of the minority monomer is larger than that of the majority monomer. Depending on the strength of the wall potential and the film thickness, the walls can become completely wetted by the minority monomer. PMID:22852656

  19. Assessment of physical activity with the Computer Science and Applications, Inc., accelerometer: laboratory versus field validation.

    PubMed

    Nichols, J F; Morgan, C G; Chabot, L E; Sallis, J F; Calfas, K J

    2000-03-01

    Our purpose was to compare the validity of the Computer Science and Applications, (CSA) Inc., accelerometer in laboratory and field settings and establish CSA count ranges for light, moderate, and vigorous physical activity. Validity was determined in 60 adults during treadmill exercise, using oxygen consumption (VO2) as the criterion measure, while 30 adults walked and jogged outdoors on a 400-m track. The relationship between CSA counts and VO2 was linear (R2 = .89 SEE = 3.72 ml.kg-1.min-1), as was the relationship between velocity and counts in the field (R2 = .89, SEE = 0.89 mi.hr-1). However, significant differences were found (p < .05) between laboratory and field measures of CSA counts for light and vigorous intensity. We conclude that the CSA can be used to quantify walking and jogging outdoors on level ground; however, laboratory equations may not be appropriate for use in field settings, particularly for light and vigorous activity.

  20. Effects of herbicide applications in wheat fields: is phytohormones application a remedy?

    PubMed

    Varshney, Sugandha; Hayat, Shamshul; Alyemeni, Mohammed Nasser; Ahmad, Aqil

    2012-05-01

    The present review encompasses the physiological and yield constraints of herbicide applications with special reference to wheat productivity. Post-independence lagging of Indian agriculture to feed its population led to haphazard use of chemical pesticides and weedicides which deteriorated the productivity pay-off particularly of wheat and rice. Past some decades witnessed the potential use of certain phytohormones in augmenting abiotic stress to get rid of yield gap and productivity constraints. We summed up with reviewing the potential role of these natural regulators in overcoming above mentioned drawbacks to substitute or to integrate these chemicals with the use of plant hormones. PMID:22516826

  1. Recent Advances of MEMS Resonators for Lorentz Force Based Magnetic Field Sensors: Design, Applications and Challenges

    PubMed Central

    Herrera-May, Agustín Leobardo; Soler-Balcazar, Juan Carlos; Vázquez-Leal, Héctor; Martínez-Castillo, Jaime; Vigueras-Zuñiga, Marco Osvaldo; Aguilera-Cortés, Luz Antonio

    2016-01-01

    Microelectromechanical systems (MEMS) resonators have allowed the development of magnetic field sensors with potential applications such as biomedicine, automotive industry, navigation systems, space satellites, telecommunications and non-destructive testing. We present a review of recent magnetic field sensors based on MEMS resonators, which operate with Lorentz force. These sensors have a compact structure, wide measurement range, low energy consumption, high sensitivity and suitable performance. The design methodology, simulation tools, damping sources, sensing techniques and future applications of magnetic field sensors are discussed. The design process is fundamental in achieving correct selection of the operation principle, sensing technique, materials, fabrication process and readout systems of the sensors. In addition, the description of the main sensing systems and challenges of the MEMS sensors are discussed. To develop the best devices, researches of their mechanical reliability, vacuum packaging, design optimization and temperature compensation circuits are needed. Future applications will require multifunctional sensors for monitoring several physical parameters (e.g., magnetic field, acceleration, angular ratio, humidity, temperature and gases). PMID:27563912

  2. Recent Advances of MEMS Resonators for Lorentz Force Based Magnetic Field Sensors: Design, Applications and Challenges.

    PubMed

    Herrera-May, Agustín Leobardo; Soler-Balcazar, Juan Carlos; Vázquez-Leal, Héctor; Martínez-Castillo, Jaime; Vigueras-Zuñiga, Marco Osvaldo; Aguilera-Cortés, Luz Antonio

    2016-01-01

    Microelectromechanical systems (MEMS) resonators have allowed the development of magnetic field sensors with potential applications such as biomedicine, automotive industry, navigation systems, space satellites, telecommunications and non-destructive testing. We present a review of recent magnetic field sensors based on MEMS resonators, which operate with Lorentz force. These sensors have a compact structure, wide measurement range, low energy consumption, high sensitivity and suitable performance. The design methodology, simulation tools, damping sources, sensing techniques and future applications of magnetic field sensors are discussed. The design process is fundamental in achieving correct selection of the operation principle, sensing technique, materials, fabrication process and readout systems of the sensors. In addition, the description of the main sensing systems and challenges of the MEMS sensors are discussed. To develop the best devices, researches of their mechanical reliability, vacuum packaging, design optimization and temperature compensation circuits are needed. Future applications will require multifunctional sensors for monitoring several physical parameters (e.g., magnetic field, acceleration, angular ratio, humidity, temperature and gases). PMID:27563912

  3. Recent Advances of MEMS Resonators for Lorentz Force Based Magnetic Field Sensors: Design, Applications and Challenges.

    PubMed

    Herrera-May, Agustín Leobardo; Soler-Balcazar, Juan Carlos; Vázquez-Leal, Héctor; Martínez-Castillo, Jaime; Vigueras-Zuñiga, Marco Osvaldo; Aguilera-Cortés, Luz Antonio

    2016-08-24

    Microelectromechanical systems (MEMS) resonators have allowed the development of magnetic field sensors with potential applications such as biomedicine, automotive industry, navigation systems, space satellites, telecommunications and non-destructive testing. We present a review of recent magnetic field sensors based on MEMS resonators, which operate with Lorentz force. These sensors have a compact structure, wide measurement range, low energy consumption, high sensitivity and suitable performance. The design methodology, simulation tools, damping sources, sensing techniques and future applications of magnetic field sensors are discussed. The design process is fundamental in achieving correct selection of the operation principle, sensing technique, materials, fabrication process and readout systems of the sensors. In addition, the description of the main sensing systems and challenges of the MEMS sensors are discussed. To develop the best devices, researches of their mechanical reliability, vacuum packaging, design optimization and temperature compensation circuits are needed. Future applications will require multifunctional sensors for monitoring several physical parameters (e.g., magnetic field, acceleration, angular ratio, humidity, temperature and gases).

  4. An expansion of the field modulus suitable for the description of strong field gradients in axisymmetric magnetic fields: application to single-sided magnet design, field mapping and STRAFI.

    PubMed

    Hugon, Cedric; Aubert, Guy; Sakellariou, Dimitris

    2012-01-01

    Mapping (or plotting) the magnetic field has a critical importance for the achievement of the homogeneous magnetic field necessary to standard MR experiments. A powerful tool for this purpose is the Spherical Harmonic Expansion (SHE), which provides a simple way to describe the spatial variations of a field in free space. Well-controlled non-zero spatial variations of the field are critical to MRI. The resolution of the image is directly related to the strength of the gradient used to encode space. As a result, it is desirable to have strong variations of the field. In that case, the SHE cannot be used as is, because the field modulus variations are affected by the variations of all components of the field. In this paper, we propose a method based on the SHE to characterize such variations, theoretically and experimentally, in the limit of an axisymmetric magnetic field. Practical applications of this method are proposed through the examples of single-sided magnet design and characterization, along with Stray-Field Imaging (STRAFI).

  5. Novel Applications of Magnetic Fields for Fluid Flow Control and for Simulating Variable Gravity Conditions

    NASA Technical Reports Server (NTRS)

    Ramachandran, N.

    2005-01-01

    Static and dynamic magnetic fields have been used to control convection in many materials processing applications. In most of the applications, convection control (damping or enhancement) is achieved through the Lorentz force that can be tailored to counteract/assist dominant system flows. This technique has been successfully applied to liquids that are electrically conducting, such as high temperature melts of semiconductors, metals and alloys, etc. In liquids with low electrical conductivity such as ionic solutions of salts in water, the Lorentz force is weak and hence not very effective and alternate ways of flow control are necessary. If the salt in solution is paramagnetic then the variation of magnetic susceptibility with temperature and/or concentration can be used for flow control. For thermal buoyancy driven flows this can be accomplished in a temperature range below the Curie point of the salt. The magnetic force is proportional to the magnetic susceptibility and the product of the magnetic field and its gradient. By suitably positioning the experiment cell in the magnet, system flows can be assisted or countered, as desired. A similar approach can be extended to diamagnetic substances and fluids but the required magnetic force is considerably larger than that required for paramagnetic substances. The presentation will provide an overview of work to date on a NASA fluid physics sponsored project that aims to test the hypothesis of convective flow control using strong magnetic fields in protein crystal growth. The objective is to understand the nature of the various forces that come into play, delineate causative factors for fluid flow and to quantify them through experiments, analysis, and numerical modeling. The seminar will report specifically on the experimental results using paramagnetic salts and solutions in magnetic fields and compare them to analytical predictions. Applications of the concept to protein crystallization studies will be discussed

  6. Low-macroscopic field emission properties of wide bandgap copper aluminium oxide nanoparticles for low-power panel applications

    NASA Astrophysics Data System (ADS)

    Narayan Banerjee, Arghya; Joo, Sang W.

    2011-09-01

    Field emission properties of CuAlO2 nanoparticles are reported for the first time, with a low turn-on field of approximately 2 V µm - 1 and field enhancement factor around 230. The field emission process follows the standard Fowler-Nordheim tunnelling of cold electron emission. The emission mechanism is found to be a combination of low electron affinity, internal nanostructure and large field enhancement at the low-dimensional emitter tips of the nanoparticles. The field emission properties are comparable to the conventional carbon-based field emitters, and thus can become alternative candidate for field emission devices for low-power panel applications.

  7. Low-macroscopic field emission properties of wide bandgap copper aluminium oxide nanoparticles for low-power panel applications.

    PubMed

    Banerjee, Arghya Narayan; Joo, Sang W

    2011-09-01

    Field emission properties of CuAlO(2) nanoparticles are reported for the first time, with a low turn-on field of approximately 2 V µm(-1) and field enhancement factor around 230. The field emission process follows the standard Fowler-Nordheim tunnelling of cold electron emission. The emission mechanism is found to be a combination of low electron affinity, internal nanostructure and large field enhancement at the low-dimensional emitter tips of the nanoparticles. The field emission properties are comparable to the conventional carbon-based field emitters, and thus can become alternative candidate for field emission devices for low-power panel applications. PMID:21841217

  8. Scalable wide-field optical coherence tomography-based angiography for in vivo imaging applications

    PubMed Central

    Xu, Jingjiang; Wei, Wei; Song, Shaozhen; Qi, Xiaoli; Wang, Ruikang K.

    2016-01-01

    Recent advances in optical coherence tomography (OCT)-based angiography have demonstrated a variety of biomedical applications in the diagnosis and therapeutic monitoring of diseases with vascular involvement. While promising, its imaging field of view (FOV) is however still limited (typically less than 9 mm2), which somehow slows down its clinical acceptance. In this paper, we report a high-speed spectral-domain OCT operating at 1310 nm to enable wide FOV up to 750 mm2. Using optical microangiography (OMAG) algorithm, we are able to map vascular networks within living biological tissues. Thanks to 2,048 pixel-array line scan InGaAs camera operating at 147 kHz scan rate, the system delivers a ranging depth of ~7.5 mm and provides wide-field OCT-based angiography at a single data acquisition. We implement two imaging modes (i.e., wide-field mode and high-resolution mode) in the OCT system, which gives highly scalable FOV with flexible lateral resolution. We demonstrate scalable wide-field vascular imaging for multiple finger nail beds in human and whole brain in mice with skull left intact at a single 3D scan, promising new opportunities for wide-field OCT-based angiography for many clinical applications. PMID:27231630

  9. Modeling of geothermal reservoirs: Fundamental processes, computer simulation, and field applications

    SciTech Connect

    Pruess, K.

    1988-09-01

    This article attempts to critically evaluate the present state of the art of geothermal reservoir simulation. Methodological aspects of geothermal reservoir modeling are briefly reviewed, with special emphasis on flow in fractured media. Then we examine applications of numerical simulation to studies of reservoir dynamics, well test design and analysis, and modeling of specific fields. Tangible impacts of reservoir simulation technology on geothermal energy development are pointed out. We conclude with considerations on possible future developments in the mathematical modeling of geothermal fields. 45 refs., 4 figs., 2 tabs.

  10. Methods of high current magnetic field generator for transcranial magnetic stimulation application

    SciTech Connect

    Bouda, N. R. Pritchard, J.; Weber, R. J.; Mina, M.

    2015-05-07

    This paper describes the design procedures and underlying concepts of a novel High Current Magnetic Field Generator (HCMFG) with adjustable pulse width for transcranial magnetic stimulation applications. This is achieved by utilizing two different switching devices, the MOSFET and insulated gate bipolar transistor (IGBT). Results indicate that currents as high as ±1200 A can be generated with inputs of +/−20 V. Special attention to tradeoffs between field generators utilizing IGBT circuits (HCMFG{sub 1}) and MOSFET circuits (HCMFG{sub 2}) was considered. The theory of operation, design, experimental results, and electronic setup are presented and analyzed.

  11. Methods of high current magnetic field generator for transcranial magnetic stimulation application

    NASA Astrophysics Data System (ADS)

    Bouda, N. R.; Pritchard, J.; Weber, R. J.; Mina, M.

    2015-05-01

    This paper describes the design procedures and underlying concepts of a novel High Current Magnetic Field Generator (HCMFG) with adjustable pulse width for transcranial magnetic stimulation applications. This is achieved by utilizing two different switching devices, the MOSFET and insulated gate bipolar transistor (IGBT). Results indicate that currents as high as ±1200 A can be generated with inputs of +/-20 V. Special attention to tradeoffs between field generators utilizing IGBT circuits (HCMFG1) and MOSFET circuits (HCMFG2) was considered. The theory of operation, design, experimental results, and electronic setup are presented and analyzed.

  12. Vignettes from the field of mathematical biology: the application of mathematics to biology and medicine

    PubMed Central

    Murray, J. D.

    2012-01-01

    The application of mathematical models in biology and medicine has a long history. From the sparse number of papers in the first half of the twentieth century with a few scientists working in the field it has become vast with thousands of active researchers. We give a brief, and far from definitive history, of how some parts of the field have developed and how the type of research has changed. We describe in more detail just two examples of specific models which are directly related to real biological problems, namely animal coat patterns and the growth and image enhancement of glioblastoma brain tumours. PMID:23919124

  13. Techniques for application of faecal DNA methods to field studies of Ursids.

    PubMed

    Wasser, S K; Houston, C S; Koehler, G M; Cadd, G G; Fain, S R

    1997-11-01

    We describe methods for the preservation, extraction and amplification of DNA from faeces that facilitate field applications of faecal DNA technology. Mitochondrial, protein encoding and microsatellite nuclear DNA extracted and amplified from faeces of Malayan sun bears and North American black bears is shown to be identical to that extracted and amplified from the same individual's tissue or blood. A simple drying agent, silica beads, is shown to be a particularly effective preservative, allowing easy and safe transport of samples from the field. Methods are also developed to eliminate the risk of faecal DNA contamination from hair present in faeces. PMID:9394465

  14. Application of Gaussian moment method to a gene autoregulation model of rational vector field

    NASA Astrophysics Data System (ADS)

    Kang, Yan-Mei; Chen, Xi

    2016-07-01

    We take a lambda expression autoregulation model driven by multiplicative and additive noises as example to extend the Gaussian moment method from nonlinear stochastic systems of polynomial vector field to noisy biochemical systems of rational polynomial vector field. As a direct application of the extended method, we also disclose the phenomenon of stochastic resonance. It is found that the transcription rate can inhibit the stochastic resonant effect, but the degradation rate may enhance the phenomenon. These observations should be helpful in understanding the functional role of noise in gene autoregulation.

  15. Fabrication of Plasma Transient Density Structures and its Application to High-Field Plasma Devices

    SciTech Connect

    Chen Szuyuan; Wang Jyhpyng; Lin Jiunnyuan

    2006-11-27

    Fabrications of plasma transient density structures such as plasma waveguide, variable gas jet length, longitudinal density structure, and transverse wiggler by using laser machining in a gas jet are presented. The implementations of the technique of variable gas jet length with laser machining to achieve tomographic diagnosis of laser wakefield electron acceleration, x-ray lasing, and high harmonic generation are reported. Applications of these elements of high-field plasma devices and their combinations to enhance the products in high-field physics are presented or proposed.

  16. Application of digital interferogram evaluation techniques to the measurement of 3-D flow fields

    NASA Technical Reports Server (NTRS)

    Becker, Friedhelm; Yu, Yung H.

    1987-01-01

    A system for digitally evaluating interferograms, based on an image processing system connected to a host computer, was implemented. The system supports one- and two-dimensional interferogram evaluations. Interferograms are digitized, enhanced, and then segmented. The fringe coordinates are extracted, and the fringes are represented as polygonal data structures. Fringe numbering and fringe interpolation modules are implemented. The system supports editing and interactive features, as well as graphic visualization. An application of the system to the evaluation of double exposure interferograms from the transonic flow field around a helicopter blade and the reconstruction of the three dimensional flow field is given.

  17. Environmental benefits and economic costs of manure incorporation on dairy waste application fields.

    PubMed

    Osei, E; Gassman, P W; Hauck, L M; Jones, R; Beran, L; Dyke, P T; Goss, D W; Flowers, J D; McFarland, A M S; Saleh, A

    2003-05-01

    Model simulations performed representing dairies in a 93000 ha watershed in north central Texas suggest that manure incorporation results in reduced phosphorus (P) losses at relatively small to moderate cost to producers. Simulated manure incorporation with a tandem disk on fields double-cropped with sorghum/winter wheat resulted in up to 33, 45, and 37% reductions in per hectare sediment-bound, soluble, and total P losses in edge-of-field runoff, relative to simulated surface manure applications. The effects of incorporation were evaluated at three different manure application rates. On aggregate across all three manure application rates, significant declines in P losses were obtained with incorporation except for sediment-bound P losses under the N-based manure application rate scenario. We found that the practice of incorporating manure shortly after it has been broadcast on the soil surface could help reduce P losses in such situations where P-based rates alone prove inadequate. The cost the producer incurs when manure is incorporated is on average about 1% of net returns when manure is applied at the N rate and 2-3% when it is applied at alternative P-based rates. In practice the costs could be lower because producers may substitute the manure incorporation operation for a tandem disk operation performed prior to manure application. As more and more dairy producers switch to the use of sorghum and corn silage in dairy rations and consequent on-farm production of these forages, the practice of manure incorporation may help to reduce phosphorus losses resulting from dairy manure applications to fields with these forage crops. PMID:12767858

  18. Field Enhancement in Nano Photonic Applications: Transition Metamaterials, Plasmonics and Chirality

    NASA Astrophysics Data System (ADS)

    Alali, Fatema Abdullah

    This dissertation includes four chapters. Chapter 1 contains a brief introduction to the field of nanophotonics and an overview of the topics studied and methods used in this research. Chapters 2, 3 and 4 each deal with distinct and major applications of nanophotonics. Chapter 2 focuses exclusively on metamaterials, specifically transition metamaterials were the refractive index gradually decreases from positive to negative values passing through a near zero value point along the direction of propagation. We investigate the propagation of a Gaussian beam through such materials and show for the first time that unlike the case of plain waves, Gaussian beam field enhancement near the zero refractive index is attainable for normal incident. Such materials can be used for light manipulation applications such as cloaking and field concentrators. The next chapter, Chapter 3, deals with plasmonics, the science and applications of plasmons. We study the Localized Surface Plasmon Resonance (LSPR) of metallic Au nanotori and nanoring structures and compare their absorption as a function or orientation to that of other nanoparticles (nanospheres and nanorods), specifically for biomedical applications, especially photothermal therapy. We show that nanotori (nanorings) have higher averaged absorption for random orientations, which makes them well-suited for colloidal heating applications such as photothermal cancer therapy. Finally, in Chapter 4 we investigate methods for enhancing optical rotation in artificial chiral materials. We introduce the concept of multiscale chirality, a superposition of geometric and molecular chirality, to boost the effective chirality parameter kappa of a material and consequently its optical activity. The goal is to obtain a sufficiently high kappa to achieve an effective negative refractive index without requiring simultaneous negative values of permittivity and permeability, which are difficult to achieve at optical wavelengths. We also use

  19. LC-lens array with light field algorithm for 3D biomedical applications

    NASA Astrophysics Data System (ADS)

    Huang, Yi-Pai; Hsieh, Po-Yuan; Hassanfiroozi, Amir; Martinez, Manuel; Javidi, Bahram; Chu, Chao-Yu; Hsuan, Yun; Chu, Wen-Chun

    2016-03-01

    In this paper, liquid crystal lens (LC-lens) array was utilized in 3D bio-medical applications including 3D endoscope and light field microscope. Comparing with conventional plastic lens array, which was usually placed in 3D endoscope or light field microscope system to record image disparity, our LC-lens array has higher flexibility of electrically changing its focal length. By using LC-lens array, the working distance and image quality of 3D endoscope and microscope could be enhanced. Furthermore, the 2D/3D switching ability could be achieved if we turn off/on the electrical power on LClens array. In 3D endoscope case, a hexagonal micro LC-lens array with 350um diameter was placed at the front end of a 1mm diameter endoscope. With applying electric field on LC-lens array, the 3D specimen would be recorded as from seven micro-cameras with different disparity. We could calculate 3D construction of specimen with those micro images. In the other hand, if we turn off the electric field on LC-lens array, the conventional high resolution 2D endoscope image would be recorded. In light field microscope case, the LC-lens array was placed in front of the CMOS sensor. The main purpose of LC-lens array is to extend the refocusing distance of light field microscope, which is usually very narrow in focused light field microscope system, by montaging many light field images sequentially focusing on different depth. With adjusting focal length of LC-lens array from 2.4mm to 2.9mm, the refocusing distance was extended from 1mm to 11.3mm. Moreover, we could use a LC wedge to electrically shift the optics axis and increase the resolution of light field.

  20. Personnel neutron dose assessment upgrade: Volume 2, Field neutron spectrometer for health physics applications

    SciTech Connect

    Brackenbush, L.W.; Reece, W.D.; Miller, S.D.; Endres, G.W.R.; Durham, J.S.; Scherpelz, R.I.; Tomeraasen, P.L.; Stroud, C.M.; Faust, L.G.; Vallario, E.J.

    1988-07-01

    Both the (ICRP) and the (NCPR) have recommended an increase in neutron quality factors and the adoption of effective dose equivalent methods. The series of reports entitled Personnel Neutron Dose Assessment Upgrade (PNL-6620) addresses these changes. Volume 1 in this series of reports (Personnel Neutron Dosimetry Assessment) provided guidance on the characteristics, use, and calibration of personnel neutron dosimeters in order to meet the new recommendations. This report, Volume 2: Field Neutron Spectrometer for Health Physics Applications describes the development of a portable field spectrometer which can be set up for use in a few minutes by a single person. The field spectrometer described herein represents a significant advance in improving the accuracy of neutron dose assessment. It permits an immediate analysis of the energy spectral distribution associated with the radiation from which neutron quality factor can be determined. It is now possible to depart from the use of maximum Q by determining and realistically applying a lower Q based on spectral data. The field spectrometer is made up of two modules: a detector module with built-in electronics and an analysis module with a IBM PC/reg sign/-compatible computer to control the data acquisition and analysis of data in the field. The unit is simple enough to allow the operator to perform spectral measurements with minimal training. The instrument is intended for use in steady-state radiation fields with neutrons energies covering the fission spectrum range. The prototype field spectrometer has been field tested in plutonium processing facilities, and has been proven to operate satisfactorily. The prototype field spectrometer uses a /sup 3/He proportional counter to measure the neutron energy spectrum between 50 keV and 5 MeV and a tissue equivalent proportional counter (TEPC) to measure absorbed neutron dose.

  1. Reproducing Actual Morphology of Planetary Lava Flows

    NASA Astrophysics Data System (ADS)

    Miyamoto, H.; Sasaki, S.

    1996-03-01

    Assuming that lava flows behave as non-isothermal laminar Bingham fluids, we developed a numerical code of lava flows. We take the self gravity effects and cooling mechanisms into account. The calculation method is a kind of cellular automata using a reduced random space method, which can eliminate the mesh shape dependence. We can calculate large scale lava flows precisely without numerical instability and reproduce morphology of actual lava flows.

  2. The Actual Apollo 13 Prime Crew

    NASA Technical Reports Server (NTRS)

    1970-01-01

    The actual Apollo 13 lunar landing mission prime crew from left to right are: Commander, James A. Lovell Jr., Command Module pilot, John L. Swigert Jr.and Lunar Module pilot, Fred W. Haise Jr. The original Command Module pilot for this mission was Thomas 'Ken' Mattingly Jr. but due to exposure to German measles he was replaced by his backup, Command Module pilot, John L. 'Jack' Swigert Jr.

  3. Fabrication of superhydrophobic/superoleophilic cotton for application in the field of water/oil separation.

    PubMed

    Liu, Feng; Ma, Miaolian; Zang, Deli; Gao, Zhengxin; Wang, Chengyu

    2014-03-15

    Cotton with superhydrophobic and superoleophilic properties had been successfully fabricated for application in the field of oil/water separation by the combination of SiO2 nanoparticles on cotton fiber surface and subsequent octadecyltrichlorosilane modification. The as-prepared cotton could be used to selectively absorb various common oils and organic solvents up to above 50 times of its own weight while repelling water completely. The absorbed oils were easily collected by a simple vacuum filtration, and the recovered cotton could be reused for several cycles while still keeping high absorption capacity. Moreover, the as-prepared cotton was simply spun into cloth, which not only could be tailored to the water-repellent clothing but also could be used in the oil/water separation filter system. The results presented in this work might provide a simple, low-cost and environment friendly approach for application in the field of water/oil separation.

  4. Synthesis of ceramic-based porous gradient structures for applications in energy conversion and related fields

    NASA Astrophysics Data System (ADS)

    Graule, Thomas; Ozog, Paulina; Durif, Caroline; Wilkens-Heinecke, Judit; Kata, Dariusz

    2016-06-01

    Porous, graded ceramic structures are of high relevance in the field of energy conversion as well as in catalysis, and additionally in filtration technology and in biomedical applications. Among different technologies for the tailored design for such structures we demonstrate here a new environmental friendly UV curing-based concept to prepare laminated structures with pore sizes ranging from a few microns up to 50 microns in diameter and with porosities ranging from 10% up to 75 vol.% porosity.

  5. Application of evolution strategies for the solution of an inverse problem in near-field optics.

    PubMed

    Macías, Demetrio; Vial, Alexandre; Barchiesi, Dominique

    2004-08-01

    We introduce an inversion procedure for the characterization of a nanostructure from near-field intensity data. The method proposed is based on heuristic arguments and makes use of evolution strategies for the solution of the inverse problem as a nonlinear constrained-optimization problem. By means of some examples we illustrate the performance of our inversion method. We also discuss its possibilities and potential applications.

  6. Standard Practices for Usage of Inductive Magnetic Field Probes with Application to Electric Propulsion Testing

    NASA Technical Reports Server (NTRS)

    Polzin, Kurt A.; Hill, Carrie S.

    2013-01-01

    Inductive magnetic field probes (also known as B-dot probes and sometimes as B-probes or magnetic probes) are useful for performing measurements in electric space thrusters and various plasma accelerator applications where a time-varying magnetic field is present. Magnetic field probes have proven to be a mainstay in diagnosing plasma thrusters where changes occur rapidly with respect to time, providing the means to measure the magnetic fields produced by time-varying currents and even an indirect measure of the plasma current density through the application of Ampère's law. Examples of applications where this measurement technique has been employed include pulsed plasma thrusters and quasi-steady magnetoplasmadynamic thrusters. The Electric Propulsion Technical Committee (EPTC) of the American Institute of Aeronautics and Astronautics (AIAA) was asked to assemble a Committee on Standards (CoS) for Electric Propulsion Testing. The assembled CoS was tasked with developing Standards and Recommended Practices for various diagnostic techniques used in the evaluation of plasma thrusters. These include measurements that can yield either global information related to a thruster and its performance or detailed, local data related to the specific physical processes occurring in the plasma. This paper presents a summary of the standard, describing the preferred methods for fabrication, calibration, and usage of inductive magnetic field probes for use in diagnosing plasma thrusters. Inductive magnetic field probes (also called B-dot probes throughout this document) are commonly used in electric propulsion (EP) research and testing to measure unsteady magnetic fields produced by time-varying currents. The B-dot probe is relatively simple in construction, and requires minimal cost, making it a low-cost technique that is readily accessible to most researchers. While relatively simple, the design of a B-dot probe is not trivial and there are many opportunities for errors in

  7. Narrow band perfect absorber for maximum localized magnetic and electric field enhancement and sensing applications.

    PubMed

    Yong, Zhengdong; Zhang, Senlin; Gong, Chensheng; He, Sailing

    2016-01-01

    Plasmonics offer an exciting way to mediate the interaction between light and matter, allowing strong field enhancement and confinement, large absorption and scattering at resonance. However, simultaneous realization of ultra-narrow band perfect absorption and electromagnetic field enhancement is challenging due to the intrinsic high optical losses and radiative damping in metals. Here, we propose an all-metal plasmonic absorber with an absorption bandwidth less than 8 nm and polarization insensitive absorptivity exceeding 99%. Unlike traditional Metal-Dielectric-Metal configurations, we demonstrate that the narrowband perfect absorption and field enhancement are ascribed to the vertical gap plasmonic mode in the deep subwavelength scale, which has a high quality factor of 120 and mode volume of about 10(-4) × (λres/n)(3). Based on the coupled mode theory, we verify that the diluted field enhancement is proportional to the absorption, and thus perfect absorption is critical to maximum field enhancement. In addition, the proposed perfect absorber can be operated as a refractive index sensor with a sensitivity of 885 nm/RIU and figure of merit as high as 110. It provides a new design strategy for narrow band perfect absorption and local field enhancement, and has potential applications in biosensors, filters and nonlinear optics. PMID:27046540

  8. Narrow band perfect absorber for maximum localized magnetic and electric field enhancement and sensing applications

    PubMed Central

    Yong, Zhengdong; Zhang, Senlin; Gong, Chensheng; He, Sailing

    2016-01-01

    Plasmonics offer an exciting way to mediate the interaction between light and matter, allowing strong field enhancement and confinement, large absorption and scattering at resonance. However, simultaneous realization of ultra-narrow band perfect absorption and electromagnetic field enhancement is challenging due to the intrinsic high optical losses and radiative damping in metals. Here, we propose an all-metal plasmonic absorber with an absorption bandwidth less than 8 nm and polarization insensitive absorptivity exceeding 99%. Unlike traditional Metal-Dielectric-Metal configurations, we demonstrate that the narrowband perfect absorption and field enhancement are ascribed to the vertical gap plasmonic mode in the deep subwavelength scale, which has a high quality factor of 120 and mode volume of about 10−4 × (λres/n)3. Based on the coupled mode theory, we verify that the diluted field enhancement is proportional to the absorption, and thus perfect absorption is critical to maximum field enhancement. In addition, the proposed perfect absorber can be operated as a refractive index sensor with a sensitivity of 885 nm/RIU and figure of merit as high as 110. It provides a new design strategy for narrow band perfect absorption and local field enhancement, and has potential applications in biosensors, filters and nonlinear optics. PMID:27046540

  9. An iPad and Android-based Application for Digitally Recording Geologic Field Data

    NASA Astrophysics Data System (ADS)

    Malinconico, L. L.; Sunderlin, D.; Liew, C.; Ho, A. S.; Bekele, K. A.

    2011-12-01

    Field experience is a significant component in most geology courses, especially sed/strat and structural geology. Increasingly, the spatial presentation, analysis and interpretation of geologic data is done using digital methodologies (GIS, Google Earth, stereonet and spreadsheet programs). However, students and professionals continue to collect field data manually on paper maps and in the traditional "orange field notebooks". Upon returning from the field, data are then manually transferred into digital formats for processing, mapping and interpretation. The transfer process is both cumbersome and prone to transcription error. In conjunction with the computer science department, we are in the process of developing an application (App) for iOS (the iPad) and Android platforms that can be used to digitally record data measured in the field. This is not a mapping program, but rather a way of bypassing the field book step to acquire digital data directly that can then be used in various analysis and display programs. Currently, the application allows the user to select from five different structural data situations: contact, bedding, fault, joints and "other". The user can define a folder for the collection and separation of data for each project. Observations are stored as individual records of field measurements in each folder. The exact information gathered depends on the nature of the observation, but common to all pages is the ability to log date, time, and lat/long directly from the tablet. Information like strike and dip are entered using scroll wheels and formation names are also entered using scroll wheels that access easy-to-modify lists of the area's stratigraphic units. This insures uniformity in the creation of the digital records from day-to-day and across field teams. Pictures can also be taken using the tablet's camera that are linked to each record. Once the field collection is complete the data (including images) can be easily exported to a .csv file

  10. Oxypnictide SmFeAs(O,F) superconductor: a candidate for high–field magnet applications

    PubMed Central

    Iida, Kazumasa; Hänisch, Jens; Tarantini, Chiara; Kurth, Fritz; Jaroszynski, Jan; Ueda, Shinya; Naito, Michio; Ichinose, Ataru; Tsukada, Ichiro; Reich, Elke; Grinenko, Vadim; Schultz, Ludwig; Holzapfel, Bernhard

    2013-01-01

    The recently discovered oxypnictide superconductor SmFeAs(O,F) is the most attractive material among the Fe-based superconductors due to its highest transition temperature of 56 K and potential for high-field performance. In order to exploit this new material for superconducting applications, the knowledge and understanding of its electro-magnetic properties are needed. Recent success in fabricating epitaxial SmFeAs(O,F) thin films opens a great opportunity to explore their transport properties. Here we report on a high critical current density of over 105 A/cm2 at 45 T and 4.2 K for both main field orientations, feature favourable for high-field magnet applications. Additionally, by investigating the pinning properties, we observed a dimensional crossover between the superconducting coherence length and the FeAs interlayer distance at 30–40 K, indicative of a possible intrinsic Josephson junction in SmFeAs(O,F) at low temperatures that can be employed in electronics applications such as a terahertz radiation source and a superconducting Qubit. PMID:23823976

  11. Oxypnictide SmFeAs(O,F) superconductor: a candidate for high-field magnet applications.

    PubMed

    Iida, Kazumasa; Hänisch, Jens; Tarantini, Chiara; Kurth, Fritz; Jaroszynski, Jan; Ueda, Shinya; Naito, Michio; Ichinose, Ataru; Tsukada, Ichiro; Reich, Elke; Grinenko, Vadim; Schultz, Ludwig; Holzapfel, Bernhard

    2013-01-01

    The recently discovered oxypnictide superconductor SmFeAs(O,F) is the most attractive material among the Fe-based superconductors due to its highest transition temperature of 56 K and potential for high-field performance. In order to exploit this new material for superconducting applications, the knowledge and understanding of its electro-magnetic properties are needed. Recent success in fabricating epitaxial SmFeAs(O,F) thin films opens a great opportunity to explore their transport properties. Here we report on a high critical current density of over 10(5) A/cm(2) at 45 T and 4.2 K for both main field orientations, feature favourable for high-field magnet applications. Additionally, by investigating the pinning properties, we observed a dimensional crossover between the superconducting coherence length and the FeAs interlayer distance at 30-40 K, indicative of a possible intrinsic Josephson junction in SmFeAs(O,F) at low temperatures that can be employed in electronics applications such as a terahertz radiation source and a superconducting Qubit.

  12. Investigations and applications of field- and photo-emitted electron beams from a radio frequency gun

    NASA Astrophysics Data System (ADS)

    Panuganti, Sriharsha

    Production of quality electron bunches using efficient ways of generation is a crucial aspect of accelerator technology. Radio frequency electron guns are widely used to generate and rapidly accelerate electron beams to relativistic energies. In the current work, we primarily study the charge generation processes of photoemission and field emission inside an RF gun installed at Fermilab's High Brightness Electron Source Laboratory (HBESL). Specifically, we study and characterize second-order nonlinear photoemission from a Cesium Telluride (Cs2Te) semiconductor photocathode, and field emission from carbon based cathodes including diamond field emission array (DFEA) and carbon nanotube (CNT) cathodes located in the RF gun's cavity. Finally, we discuss the application experiments conducted at the facility to produce soft x-rays via inverse Compton scattering (ICS), and to generate uniformly filled ellipsoidal bunches and temporally-shaped electron beams from the Cs 2Te photocathode.

  13. Electromagnetic fields radiated from a lightning return stroke - Application of an exact solution to Maxwell's equations

    NASA Technical Reports Server (NTRS)

    Le Vine, D. M.; Meneghini, R.

    1978-01-01

    A solution is presented for the electromagnetic fields radiated by an arbitrarily oriented current filament over a conducting ground plane in the case where the current propagates along the filament at the speed of light, and this solution is interpreted in terms of radiation from lightning return strokes. The solution is exact in the fullest sense; no mathematical approximations are made, and the governing differential equations and boundary conditions are satisfied. The solution has the additional attribute of being specified in closed form in terms of elementary functions. This solution is discussed from the point of view of deducing lightning current wave forms from measurements of the electromagnetic fields and understanding the effects of channel tortuosity on the radiated fields. In addition, it is compared with two approximate solutions, the traditional moment approximation and the Fraunhofer approximation, and a set of criteria describing their applicability are presented and interpreted.

  14. Investigation of Near-Field Imaging Characteristics of Radial Polarization for Application to Optical Data Storage

    NASA Astrophysics Data System (ADS)

    Kim, Wan-Chin; Park, No-Cheol; Yoon, Yong-Joong; Choi, Hyun; Park, Young-Pil

    2007-07-01

    Radially polarized incident light can generate a more confined longitudinal electric field on a focal plane in near-field (NF) optics than focusing circularly polarized light. Using this phenomenon, it is feasible to reduce beam spot size on storage media to increase the areal density of optical data storage. A radially polarized beam generates a beam spot which is 20% more confined on the 1st surface of medium than that of circularly polarized light. However, the peak intensity of total electric field sharply decreases and its transverse component is much more dominant inside the media stack. This confirms that radially polarized optics can be a candidate not for an NF recording system but for an NF read-only memory (ROM) system. Potentially, the results could be useful to understand the effect of radial and circular polarizations inside and outside medium for various applications of NF optics.

  15. Template nanowires for spintronics applications: nanomagnet microwave resonators functioning in zero applied magnetic field.

    PubMed

    Mourachkine, A; Yazyev, O V; Ducati, C; Ansermet, J-Ph

    2008-11-01

    Low-cost spintronic devices functioning in zero applied magnetic field are required for bringing the idea of spin-based electronics into the real-world industrial applications. Here we present first microwave measurements performed on nanomagnet devices fabricated by electrodeposition inside porous membranes. In the paper, we discuss in details a microwave resonator consisting of three nanomagnets, which functions in zero external magnetic field. By applying a microwave signal at a particular frequency, the magnetization of the middle nanomagnet experiences the ferromagnetic resonance (FMR), and the device outputs a measurable direct current (spin-torque diode effect). Alternatively, the nanodevice can be used as a microwave oscillator functioning in zero field. To test the resonators at microwave frequencies, we developed a simple measurement setup.

  16. The application of ptychography in the field of high power laser

    NASA Astrophysics Data System (ADS)

    Wang, Haiyan; Liu, Cheng; Pan, Xingchen; Zhu, Jianqiang

    2015-02-01

    The commonly used interferometer and Hartmann-Shack sensor are not ideally qualified for the phase or wavefront measurement in the field of high power laser because the optical elements always have large aperture, the steep phase gradient and very irregular surface profile. The ptychography, which is a newly developed coherent diffraction method for the imaging with short wavelength, can be a perfect alternative to traditional technologies due to its outstanding advantages. The complex transmittance of the optical element can be obtained by measuring its transmitted and incident fields with ptychography and calculating their phase difference. Since ptychography can realize measurement with a resolution comparable to that of interferometry, it can find lots of applications in the field of high power laser such as the measurement of the complex transmittance of large optical element, the thermal distortion of the gas-cooled Nd:glass amplifier, and the focal length of the lens array etc.

  17. Compressive sensing of full wave field data for structural health monitoring applications.

    PubMed

    Di Ianni, Tommaso; De Marchi, Luca; Perelli, Alessandro; Marzani, Alessandro

    2015-07-01

    Numerous nondestructive evaluations and structural health monitoring approaches based on guide waves rely on analysis of wave fields recorded through scanning laser Doppler vibrometers (SLDVs) or ultrasonic scanners. The informative content which can be extracted from these inspections is relevant; however, the acquisition process is generally time-consuming, posing a limit in the applicability of such approaches. To reduce the acquisition time, we use a random sampling scheme based on compressive sensing (CS) to minimize the number of points at which the field is measured. The CS reconstruction performance is mostly influenced by the choice of a proper decomposition basis to exploit the sparsity of the acquired signal. Here, different bases have been tested to recover the guided waves wave field acquired on both an aluminum and a composite plate. Experimental results show that the proposed approach allows a reduction of the measurement locations required for accurate signal recovery to less than 34% of the original sampling grid.

  18. Plasmonic hierarchical nanostructures with cascaded field enhancement and their SERS applications

    NASA Astrophysics Data System (ADS)

    Bai, Benfeng; Zhu, Zhendong

    2016-04-01

    Plasmonic nanostructures with strong near field "hot spots" are highly demanded in many applications such as surface enhanced Raman spectroscopy (SERS). Here, we present some specially designed plasmonic hierarchical nanostructures that combine geometric features of micro- and nanoscales. Owing to the mode coupling and hybridization in these multiscale systems that can produce the cascaded field enhancement (CFE) effect, extremely strong and highly confined field hot spots can be readily generated in nanoscale volumes. Two typical hierarchical nanostructures are presented: an Mshaped grating with 30 nm narrow V-shaped grooves and a nanoparticle-in-cavity (PIC) plasmonic nanoantenna array. A cost-effective, efficient and reliable fabrication technique based on room-temperature nanoimprinting and anisotropic reactive ion etching is developed to fabricate these plasmonic hierarchical nanostructures in large area, during which the nano-features can be finely controlled and tuned. The field distributions and enhancement in the proposed structures are experimentally characterized, which agree very well with the numerical simulations. SERS experiments show the SERS enhancement factor as high as 5×108 by employing these hierarchical nanostructures as SERS substrates, which verify the strong light-matter interaction and show the great potential of these devices as low-cost and highly-active substrates for SERS applications.

  19. Synthesis of carbon nanofibres from waste chicken fat for field electron emission applications

    SciTech Connect

    Suriani, A.B.; Dalila, A.R.; Mohamed, A.; Isa, I.M.; Kamari, A.; Hashim, N.; Soga, T.; Tanemura, M.

    2015-10-15

    Highlights: • Waste chicken fat is used as a starting material to produce CNFs via TCVD method. • High heating rate applied resulted in aggregation of catalyst particles. • Aggregated catalyst produced sea urchin-like CNFs with amorphous nature. • The as-grown CNFs presented a potential for field electron emission applications. - Abstract: Carbon nanofibres (CNFs) with sea urchin-like morphology were synthesised from waste chicken fat precursor via catalytic thermal chemical vapour deposition method at 750 °C. The CNFs showed amorphous structures under high-resolution transmission electron microscopy, micro-Raman spectroscopy and X-ray diffraction examination. X-ray photoelectron spectroscopy analysis confirmed that the core of the sea urchin-like CNFs was composed of Fe{sub 3}C formed within the first 20 min of synthesis time. The growth of amorphous CNFs from agglomerated Fe{sub 3}C particles was favourable due to the high heating rate applied during the synthesis. Field electron emission examination of the CNFs indicated turn-on and threshold field values of 5.4 and 6.6 V μm{sup −1} at current density of 1 and 10 μA cm{sup −2}, respectively. This study demonstrates that waste chicken fat, a low-cost and readily available resource, can be used as an inexpensive carbon source for the production of CNFs with a potential application in field electron emitters.

  20. Ion Viscosity Mediated by Tangled Magnetic Fields: An Application to Black Hole Accretion Disks

    NASA Technical Reports Server (NTRS)

    Subramanian, Prasad; Becker, Peter A.; Kafatos, Menas

    1996-01-01

    We examine the viscosity associated with the shear stress exerted by ions in the presence of a tangled magnetic field. As an application, we consider the effect of this mechanism on the structure of black hole accretion disks. We do not attempt to include a self-consistent description of the magnetic field. Instead, we assume the existence of a tangled field with coherence length lambda(sub coh), which is the average distance between the magnetic 'kinks' that scatter the particles. For simplicity, we assume that the field is self-similar, and take lambda(sub coh) to be a fixed fraction zeta of the local disk height H. Ion viscosity in the presence of magnetic fields is generally taken to be the cross-field viscosity, wherein the effective mean free path is the ion Larmor radius lambda(sub L), which is much less than the ion-ion Coulomb mean free path A(sub ii) in hot accretion disks. However, we arrive at a formulation for a 'hybrid' viscosity in which the tangled magnetic field acts as an intermediary in the transfer of momentum between different layers in the shear flow. The hybrid viscosity greatly exceeds the standard cross-field viscosity when (lambda/lambda(sub L)) much greater than (lambda(sub L)/lambda(sub ii)), where lambda = ((lambda(sub ii)(sup -1) + lambda(sub (coh)(sup -1))(sup -1) is the effective mean free path for the ions. This inequality is well satisfied in hot accretion disks, which suggests that the ions may play a much larger role in the momentum transfer process in the presence of magnetic fields than was previously thought. The effect of the hybrid viscosity on the structure of a steady-state, two-temperature, quasi-Keplerian accretion disk is analyzed. The hybrid viscosity is influenced by the degree to which the magnetic field is tangled (represented by zeta = lambda(sub coh)), and also by the relative accretion rate M/M(sub E), where M(sub E) = L(sub E)/c(sup 2) and L(sub E) is the Eddington luminosity. We find that ion viscosity in the

  1. GeoPad: Innovative Applications of Information Technology in Field Science Education

    NASA Astrophysics Data System (ADS)

    Knoop, P. A.; van der Pluijm, B.

    2003-12-01

    educational, research, or professional careers. This approach is immediately applicable to field geology courses elsewhere and indeed to other field-oriented programs \\(e.g., in biology, archeology, ecology\\), given similar needs.

  2. Thermodynamic properties for applications in chemical industry via classical force fields.

    PubMed

    Guevara-Carrion, Gabriela; Hasse, Hans; Vrabec, Jadran

    2012-01-01

    Thermodynamic properties of fluids are of key importance for the chemical industry. Presently, the fluid property models used in process design and optimization are mostly equations of state or G (E) models, which are parameterized using experimental data. Molecular modeling and simulation based on classical force fields is a promising alternative route, which in many cases reasonably complements the well established methods. This chapter gives an introduction to the state-of-the-art in this field regarding molecular models, simulation methods, and tools. Attention is given to the way modeling and simulation on the scale of molecular force fields interact with other scales, which is mainly by parameter inheritance. Parameters for molecular force fields are determined both bottom-up from quantum chemistry and top-down from experimental data. Commonly used functional forms for describing the intra- and intermolecular interactions are presented. Several approaches for ab initio to empirical force field parameterization are discussed. Some transferable force field families, which are frequently used in chemical engineering applications, are described. Furthermore, some examples of force fields that were parameterized for specific molecules are given. Molecular dynamics and Monte Carlo methods for the calculation of transport properties and vapor-liquid equilibria are introduced. Two case studies are presented. First, using liquid ammonia as an example, the capabilities of semi-empirical force fields, parameterized on the basis of quantum chemical information and experimental data, are discussed with respect to thermodynamic properties that are relevant for the chemical industry. Second, the ability of molecular simulation methods to describe accurately vapor-liquid equilibrium properties of binary mixtures containing CO(2) is shown.

  3. Biological effects of electrical- or magnetic-field application. (Latest citations from the Life Sciences Collection data base). Published Search

    SciTech Connect

    Not Available

    1992-09-01

    The bibliography contains citations concerning the application of electrical or magnetic fields to organisms. Changes in cell structure, cell shape, metabolism, mitosis, cell orientation, neuron response, germination response, and growth rates are discussed. The citations also examine the effects of electrical or magnetic field exposure from transmission lines. Biological applications of electric field cited include genetic transfer, plant cell fusion, and seed disinfection. (Contains 250 citations and includes a subject term index and title list.)

  4. Application of near field communication for health monitoring in daily life.

    PubMed

    Strömmer, Esko; Kaartinen, Jouni; Pärkkä, Juha; Ylisaukko-Oja, Arto; Korhonen, Ilkka

    2006-01-01

    We study the possibility of applying an emerging RFID-based communication technology, NFC (Near Field Communication), to health monitoring. We suggest that NFC is, compared to other competing technologies, a high-potential technology for short-range connectivity between health monitoring devices and mobile terminals. We propose practices to apply NFC to some health monitoring applications and study the benefits that are attainable with NFC. We compare NFC to other short-range communication technologies such as Bluetooth and IrDA, and study the possibility of improving the usability of health monitoring devices with NFC. We also introduce a research platform for technical evaluation, applicability study and application demonstrations of NFC.

  5. Power Delivery from an Actual Thermoelectric Generation System

    NASA Astrophysics Data System (ADS)

    Kaibe, Hiromasa; Kajihara, Takeshi; Nagano, Kouji; Makino, Kazuya; Hachiuma, Hirokuni; Natsuume, Daisuke

    2014-06-01

    Similar to photovoltaic (PV) and fuel cells, thermoelectric generators (TEGs) supply direct-current (DC) power, essentially requiring DC/alternating current (AC) conversion for delivery as electricity into the grid network. Use of PVs is already well established through power conditioning systems (PCSs) that enable DC/AC conversion with maximum-power-point tracking, which enables commercial use by customers. From the economic, legal, and regulatory perspectives, a commercial PCS for PVs should also be available for TEGs, preferably as is or with just simple adjustment. Herein, we report use of a PV PCS with an actual TEG. The results are analyzed, and proper application for TEGs is proposed.

  6. 47 CFR 1.544 - Application for broadcast station to conduct field strength measurements and for experimental...

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 47 Telecommunication 1 2010-10-01 2010-10-01 false Application for broadcast station to conduct... FEDERAL COMMUNICATIONS COMMISSION GENERAL PRACTICE AND PROCEDURE Broadcast Applications and Proceedings General Filing Requirements § 1.544 Application for broadcast station to conduct field...

  7. Engineering a 3D microfluidic culture platform for tumor-treating field application

    NASA Astrophysics Data System (ADS)

    Pavesi, Andrea; Adriani, Giulia; Tay, Andy; Warkiani, Majid Ebrahimi; Yeap, Wei Hseun; Wong, Siew Cheng; Kamm, Roger D.

    2016-05-01

    The limitations of current cancer therapies highlight the urgent need for a more effective therapeutic strategy. One promising approach uses an alternating electric field; however, the mechanisms involved in the disruption of the cancer cell cycle as well as the potential adverse effects on non-cancerous cells must be clarified. In this study, we present a novel microfluidic device with embedded electrodes that enables the application of an alternating electric field therapy to cancer cells in a 3D extracellular matrix. To demonstrate the potential of our system to aid in designing and testing new therapeutic approaches, cancer cells and cancer cell aggregates were cultured individually or co-cultured with endothelial cells. The metastatic potential of the cancer cells was reduced after electric field treatment. Moreover, the proliferation rate of the treated cancer cells was lower compared with that of the untreated cells, whereas the morphologies and proliferative capacities of the endothelial cells were not significantly affected. These results demonstrate that our novel system can be used to rapidly screen the effect of an alternating electric field on cancer and normal cells within an in vivo-like microenvironment with the potential to optimize treatment protocols and evaluate synergies between tumor-treating field treatment and chemotherapy.

  8. Engineering a 3D microfluidic culture platform for tumor-treating field application

    PubMed Central

    Pavesi, Andrea; Adriani, Giulia; Tay, Andy; Warkiani, Majid Ebrahimi; Yeap, Wei Hseun; Wong, Siew Cheng; Kamm, Roger D.

    2016-01-01

    The limitations of current cancer therapies highlight the urgent need for a more effective therapeutic strategy. One promising approach uses an alternating electric field; however, the mechanisms involved in the disruption of the cancer cell cycle as well as the potential adverse effects on non-cancerous cells must be clarified. In this study, we present a novel microfluidic device with embedded electrodes that enables the application of an alternating electric field therapy to cancer cells in a 3D extracellular matrix. To demonstrate the potential of our system to aid in designing and testing new therapeutic approaches, cancer cells and cancer cell aggregates were cultured individually or co-cultured with endothelial cells. The metastatic potential of the cancer cells was reduced after electric field treatment. Moreover, the proliferation rate of the treated cancer cells was lower compared with that of the untreated cells, whereas the morphologies and proliferative capacities of the endothelial cells were not significantly affected. These results demonstrate that our novel system can be used to rapidly screen the effect of an alternating electric field on cancer and normal cells within an in vivo-like microenvironment with the potential to optimize treatment protocols and evaluate synergies between tumor-treating field treatment and chemotherapy. PMID:27215466

  9. Enhancement of the efficiency of non-viral gene delivery by application of pulsed magnetic field

    PubMed Central

    Kamau, Sarah W.; Hassa, Paul O.; Steitz, Benedikt; Petri-Fink, Alke; Hofmann, Heinrich; Hofmann-Amtenbrink, Margarethe; von Rechenberg, Brigitte; Hottiger, Michael O.

    2006-01-01

    New approaches to increase the efficiency of non-viral gene delivery are still required. Here we report a simple approach that enhances gene delivery using permanent and pulsating magnetic fields. DNA plasmids and novel DNA fragments (PCR products) containing sequence encoding for green fluorescent protein were coupled to polyethylenimine coated superparamagnetic nanoparticles (SPIONs). The complexes were added to cells that were subsequently exposed to permanent and pulsating magnetic fields. Presence of these magnetic fields significantly increased the transfection efficiency 40 times more than in cells not exposed to the magnetic field. The transfection efficiency was highest when the nanoparticles were sedimented on the permanent magnet before the application of the pulsating field, both for small (50 nm) and large (200–250 nm) nanoparticles. The highly efficient gene transfer already within 5 min shows that this technique is a powerful tool for future in vivo studies, where rapid gene delivery is required before systemic clearance or filtration of the gene vectors occurs. PMID:16540591

  10. Switching a normal insulator into a topological insulator via electric field with application to phosphorene.

    PubMed

    Liu, Qihang; Zhang, Xiuwen; Abdalla, L B; Fazzio, Adalberto; Zunger, Alex

    2015-02-11

    The study of topological insulators has generally involved search of materials that have this property as an innate quality, distinct from normal insulators. Here we focus on the possibility of converting a normal insulator into a topological one by application of an external electric field that shifts different bands by different energies and induces a specific band inversion, which leads to a topological state. Phosphorene is a two-dimensional (2D) material that can be isolated through mechanical exfoliation from layered black phosphorus, but unlike graphene and silicene, single-layer phosphorene has a large band gap (1.5-2.2 eV). Thus, it was unsuspected to exhibit band inversion and the ensuing topological insulator behavior. Using first-principles calculations with applied perpendicular electric field F⊥ on few-layer phosphorene we predict a continuous transition from the normal insulator to a topological insulator and eventually to a metal as a function of F⊥. The tuning of topological behavior with electric field would lead to spin-separated, gapless edge states, that is, quantum spin Hall effect. This finding opens the possibility of converting normal insulating materials into topological ones via electric field and making a multifunctional "field effect topological transistor" that could manipulate simultaneously both spin and charge carrier. We use our results to formulate some design principles for looking for other 2D materials that could have such an electrical-induced topological transition.

  11. Statistical representation of high-dimensional deformation fields with application to statistically constrained 3D warping.

    PubMed

    Xue, Zhong; Shen, Dinggang; Davatzikos, Christos

    2006-10-01

    This paper proposes a 3D statistical model aiming at effectively capturing statistics of high-dimensional deformation fields and then uses this prior knowledge to constrain 3D image warping. The conventional statistical shape model methods, such as the active shape model (ASM), have been very successful in modeling shape variability. However, their accuracy and effectiveness typically drop dramatically in high-dimensionality problems involving relatively small training datasets, which is customary in 3D and 4D medical imaging applications. The proposed statistical model of deformation (SMD) uses wavelet-based decompositions coupled with PCA in each wavelet band, in order to more accurately estimate the pdf of high-dimensional deformation fields, when a relatively small number of training samples are available. SMD is further used as statistical prior to regularize the deformation field in an SMD-constrained deformable registration framework. As a result, more robust registration results are obtained relative to using generic smoothness constraints on deformation fields, such as Laplacian-based regularization. In experiments, we first illustrate the performance of SMD in representing the variability of deformation fields and then evaluate the performance of the SMD-constrained registration, via comparing a hierarchical volumetric image registration algorithm, HAMMER, with its SMD-constrained version, referred to as SMD+HAMMER. This SMD-constrained deformable registration framework can potentially incorporate various registration algorithms to improve robustness and stability via statistical shape constraints.

  12. Air resistance measurements on actual airplane parts

    NASA Technical Reports Server (NTRS)

    Weiselsberger, C

    1923-01-01

    For the calculation of the parasite resistance of an airplane, a knowledge of the resistance of the individual structural and accessory parts is necessary. The most reliable basis for this is given by tests with actual airplane parts at airspeeds which occur in practice. The data given here relate to the landing gear of a Siemanms-Schuckert DI airplane; the landing gear of a 'Luftfahrzeug-Gesellschaft' airplane (type Roland Dlla); landing gear of a 'Flugzeugbau Friedrichshafen' G airplane; a machine gun, and the exhaust manifold of a 269 HP engine.

  13. Explosive Percolation Transition is Actually Continuous

    NASA Astrophysics Data System (ADS)

    da Costa, R. A.; Dorogovtsev, S. N.; Goltsev, A. V.; Mendes, J. F. F.

    2010-12-01

    Recently a discontinuous percolation transition was reported in a new “explosive percolation” problem for irreversible systems [D. Achlioptas, R. M. D’Souza, and J. Spencer, Science 323, 1453 (2009)SCIEAS0036-807510.1126/science.1167782] in striking contrast to ordinary percolation. We consider a representative model which shows that the explosive percolation transition is actually a continuous, second order phase transition though with a uniquely small critical exponent of the percolation cluster size. We describe the unusual scaling properties of this transition and find its critical exponents and dimensions.

  14. New concept for the development of Bi-2212 wires for high-field applications

    NASA Astrophysics Data System (ADS)

    Leveratto, A.; Braccini, V.; Contarino, D.; Ferdeghini, C.; Malagoli, A.

    2016-04-01

    The first step towards high critical currents in Bi-2212 wires was recognizing that the supercurrent is blocked over long lengths by filament-diameter bubbles grown during the melt stage, which cause expansion of the wire diameter and dedensification of the superconducting filaments. While a succesful approach to reducing the problem of voids related to bubbles involved the application of a high overpressure during the heat treatment, we fabricated Bi-2212 wires by applying a new concept of suitably alternating groove-rolling and drawing techniques with the aim of densifying the phase during the working procedure prior to the heat treatment. We here for the first time were able to reach, in wires reacted with closed ends—i.e. with gas trapped in the wire as it happens in long length wires—the very same values of critical current shown in short wires reacted with open ends. This is the irrefutable evidence that, only by acting on the deformation technique, we were able to raise the critical current by properly densifying the superconducting powder inside the filaments already before the melt stage. Whole-conductor current densities in our long-length simulation wires already reach 400 A mm-2 at 4.2 K and 5 T, which can be still easily increased through architecture optimization. The actual breakthrough is that the densification is optimized without further complex treatments through a technique which can be straightforwardly applied to long length wires.

  15. Effects of sewage sludge compost application on crops and cropland in a 3-year field study.

    PubMed

    Wei, Yongjie; Liu, Yangsheng

    2005-06-01

    Composted sewage sludge can be applied to cropland to supply nutrients and improve soil physical properties. However, farmers are much concerned about heavy metal accumulation in cropland and heavy metal availability for crops. A 3-year field study was carried out in this study to investigate the effects of sewage sludge compost (SSC) application on the heavy metal accumulation in cropland soil, rapeseed germination and plumelet development, and yields of barley and Chinese cabbage, compared with conventional mineral fertilization. In addition, the availability of heavy metals for barley and Chinese cabbage was examined. Experimental results showed that SSC application produced little effects on rapeseed germination and stimulated the rape plumelet development at lower application rates (<150 ton ha(-1)). Heavy metals (Cu and Zn) were accumulated in the topsoil (0-20 cm), the barley grains and the cabbage leaves. The yields of barley and Chinese cabbage generated positive response to the SSC application. Addition of mineral N-P-K fertilizers into SSC could further increase the crop yield. Considering the heavy metals accumulation in cropland soil and their availability for crops, SSC should be applied to cropland at a limited application rate (<150 ton ha(-1)).

  16. Clinical applications at ultrahigh field (7  T). Where does it make the difference?

    PubMed

    Trattnig, Siegfried; Bogner, Wolfgang; Gruber, Stephan; Szomolanyi, Pavol; Juras, Vladimir; Robinson, Simon; Zbýň, Štefan; Haneder, Stefan

    2016-09-01

    Presently, three major MR vendors provide commercial 7-T units for clinical research under ethical permission, with the number of operating 7-T systems having increased to over 50. This rapid increase indicates the growing interest in ultrahigh-field MRI because of improved clinical results with regard to morphological as well as functional and metabolic capabilities. As the signal-to-noise ratio scales linearly with the field strength (B0 ) of the scanner, the most obvious application at 7 T is to obtain higher spatial resolution in the brain, musculoskeletal system and breast. Of specific clinical interest for neuro-applications is the cerebral cortex at 7 T, for the detection of changes in cortical structure as a sign of early dementia, as well as for the visualization of cortical microinfarcts and cortical plaques in multiple sclerosis. In the imaging of the hippocampus, even subfields of the internal hippocampal anatomy and pathology can be visualized with excellent resolution. The dynamic and static blood oxygenation level-dependent contrast increases linearly with the field strength, which significantly improves the pre-surgical evaluation of eloquent areas before tumor removal. Using susceptibility-weighted imaging, the plaque-vessel relationship and iron accumulation in multiple sclerosis can be visualized for the first time. Multi-nuclear clinical applications, such as sodium imaging for the evaluation of repair tissue quality after cartilage transplantation and (31) P spectroscopy for the differentiation between non-alcoholic benign liver disease and potentially progressive steatohepatitis, are only possible at ultrahigh fields. Although neuro- and musculoskeletal imaging have already demonstrated the clinical superiority of ultrahigh fields, whole-body clinical applications at 7 T are still limited, mainly because of the lack of suitable coils. The purpose of this article was therefore to review the clinical studies that have been performed thus

  17. The application of the Gibbs-Bogoliubov-Feynman inequality in mean field calculations for Markov random fields.

    PubMed

    Zhang, J

    1996-01-01

    The Gibbs-Bogoliubov-Feynman (GBF) inequality of statistical mechanics is adopted, with an information-theoretic interpretation, as a general optimization framework for deriving and examining various mean field approximations for Markov random fields (MRF's). The efficacy of this approach is demonstrated through the compound Gauss-Markov (CGM) model, comparisons between different mean field approximations, and experimental results in image restoration.

  18. Runoff of pharmaceuticals and personal care products following application of biosolids to an agricultural field.

    PubMed

    Topp, Edward; Monteiro, Sara C; Beck, Andrew; Coelho, Bonnie Ball; Boxall, Alistair B A; Duenk, Peter W; Kleywegt, Sonya; Lapen, David R; Payne, Michael; Sabourin, Lyne; Li, Hongxia; Metcalfe, Chris D

    2008-06-15

    Municipal biosolids are a source of nutrients for crop production. Beneficial Management Practices (BMPs) can be used to minimize the risk of contamination of adjacent water resources with chemical or microbial agents that are of public or environmental health concern. In this field study, we applied biosolids slurry at a commercial rate using either subsurface injection or broadcast application followed by incorporation. Precipitation was simulated at 1, 3, 7, 22, 36 and 266 days post-application on 2 m(2) microplots to evaluate surface runoff of 9 model pharmaceuticals and personal care products (PPCPs), atenolol, carbamazepine, cotinine, gemfibrozil, naproxen, ibuprofen, acetaminophen, sulfamethoxazole and triclosan. In runoff from the injected plots, concentrations of the model PPCPs were generally below the limits of quantitation. In contrast, in the broadcast application treatment, the concentrations of atenolol, carbamazepine, cotinine, gemfibrozil, naproxen, sulfamethoxazole and triclosan on the day following application ranged from 70-1477 ng L(-1) in runoff and generally declined thereafter with first order kinetics. The total mass of PPCPs mobilized in surface runoff per m(2) of the field ranged from 0.63 microg for atenolol to 21.1 microg for ibuprofen. For ibuprofen and acetaminophen, concentrations in runoff first decreased and then increased, suggesting that these drugs were initially chemically or physically sequestered in the biosolids slurry, and subsequently released in the soil. Carbamazepine and triclosan were detected at low concentrations in a runoff event 266 days after broadcast application. Overall, this study showed that injection of biosolids slurry below the soil surface could effectively eliminate surface runoff of PPCPs. PMID:18377955

  19. Field Emission Characteristics of Carbon Nanotubes and Their Applications in Sensors and Devices

    NASA Astrophysics Data System (ADS)

    Vaseashta, Ashok

    2003-03-01

    FIELD EMISSION CHARACTERISTICS OF CARBON NANOTUBES AND THEIR APPLICATIONS IN SENSORS AND DEVICES A. Vaseashta, C. Shaffer, M. Collins, A. Mwuara Dept of Physics, Marshall University, Huntington, WV V. Pokropivny Institute for Materials Sciences of NASU, Kiev, Ukraine. D. Dimova-Malinovska Bulgarian Academy of Sciences, Sofia, Bulgaria. The dimensionality of a system has profound influence on its physical behavior. With advances in technology over the past few decades, it has become possible to fabricate and study reduced-dimensional systems, such as carbon nanotubes (CNTs). Carbon nanotubes are especially promising candidate for cold cathode field emitter because of their electrical properties, high aspect ratio, and small radius of curvature at the tips. Electron emission from the carbon nanotubes was investigated. Based upon the field emission investigation of carbon nanotubes, several prototype devices have been suggested that operate with low swing voltages with sufficient high current densities. Characteristics that allow improved current stability and long lifetime operation for electrical and opto-electronics devices are presented. The aim of this brief overview is to illustrate the useful characteristics of carbon nanotubes and its possible application.

  20. Lateral Flow Technology for Field-Based Applications-Basics and Advanced Developments.

    PubMed

    O׳Farrell, Brendan

    2015-12-01

    In terms of their ability to provide accurate information there is a traditional continuum in diagnostics that ranges from highly accurate methods requiring infrastructure and a centralized approach to testing to less accurate technologies that can be used in a decentralized or point of care testing strategy and that require little to no supporting infrastructure. Today's lateral flow assays marry the utility of a truly field deployable, simple to use technology with the high performance of many laboratory based assay formats. Advances in recent years have allowed for the extension of performance of lateral flow assays into applications that require high accuracy and sensitivity while still maintaining the advantages of the technology from the perspective of infrastructure requirements and user friendliness. This has allowed for improved application of this technology in decentralized testing environments; veterinary, medical and otherwise. The lateral flow assay, once considered less accurate and less capable than infrastructure-heavy, laboratory based formats, is being viewed more and more as a truly versatile technology, capable of more than adequate performance at all ends of the diagnostic continuum. This article discusses the state of the art in lateral flow technology and outlines the utility of the technology in a variety of field based applications.

  1. Fipronil application on rice paddy fields reduces densities of common skimmer and scarlet skimmer.

    PubMed

    Kasai, Atsushi; Hayashi, Takehiko I; Ohnishi, Hitoshi; Suzuki, Kazutaka; Hayasaka, Daisuke; Goka, Koichi

    2016-01-01

    Several reports suggested that rice seedling nursery-box application of some systemic insecticides (neonicotinoids and fipronil) is the cause of the decline in dragonfly species noted since the 1990s in Japan. We conducted paddy mesocosm experiments to investigate the effect of the systemic insecticides clothianidin, fipronil and chlorantraniliprole on rice paddy field biological communities. Concentrations of all insecticides in the paddy water were reduced to the limit of detection within 3 months after application. However, residuals of these insecticides in the paddy soil were detected throughout the experimental period. Plankton species were affected by clothianidin and chlorantraniliprole right after the applications, but they recovered after the concentrations decreased. On the other hand, the effects of fipronil treatment, especially on Odonata, were larger than those of any other treatment. The number of adult dragonflies completing eclosion was severely decreased in the fipronil treatment. These results suggest that the accumulation of these insecticides in paddy soil reduces biodiversity by eliminating dragonfly nymphs, which occupy a high trophic level in paddy fields. PMID:26979488

  2. Fipronil application on rice paddy fields reduces densities of common skimmer and scarlet skimmer

    PubMed Central

    Kasai, Atsushi; Hayashi, Takehiko I.; Ohnishi, Hitoshi; Suzuki, Kazutaka; Hayasaka, Daisuke; Goka, Koichi

    2016-01-01

    Several reports suggested that rice seedling nursery-box application of some systemic insecticides (neonicotinoids and fipronil) is the cause of the decline in dragonfly species noted since the 1990s in Japan. We conducted paddy mesocosm experiments to investigate the effect of the systemic insecticides clothianidin, fipronil and chlorantraniliprole on rice paddy field biological communities. Concentrations of all insecticides in the paddy water were reduced to the limit of detection within 3 months after application. However, residuals of these insecticides in the paddy soil were detected throughout the experimental period. Plankton species were affected by clothianidin and chlorantraniliprole right after the applications, but they recovered after the concentrations decreased. On the other hand, the effects of fipronil treatment, especially on Odonata, were larger than those of any other treatment. The number of adult dragonflies completing eclosion was severely decreased in the fipronil treatment. These results suggest that the accumulation of these insecticides in paddy soil reduces biodiversity by eliminating dragonfly nymphs, which occupy a high trophic level in paddy fields. PMID:26979488

  3. Field experiments on high expansion (HEX) foam application for controlling LNG pool fire.

    PubMed

    Suardin, Jaffee A; Wang, Yanjun; Willson, Mike; Mannan, M Sam

    2009-06-15

    Previous research suggests that high expansion foam with an expansion ratio of 500 to 1 is one of the best options for controlling liquefied natural gas (LNG) pool fire on land. However, its effectiveness heavily depends on the foam application rate, foam generator location, and the design of LNG spill containment dike. Examination of these factors is necessary to achieve the maximum benefit for applying HEX on LNG pool fires. While theoretical study of the effects of foam on LNG fires is important, the complicated phenomena involved in LNG pool fire and foam application increase the need for LNG field experimentation. Therefore, five LNG experiments were conducted at Texas A&M University's Brayton Fire Training Field. ANGUS FIRE provided Expandol solution to form 500 to 1 high expansion foam (HEX) and its latest LNG Turbex Fixed High Expansion Foam Generators. In this paper, data collected during five experiments are presented and analyzed. The effectiveness of high expansion foam for controlling LNG pool fires with various application rates at two different types of containment pits is discussed. LNG fire behaviors and the effects of dike wall height are also presented and discussed. PMID:19056175

  4. Solid state field-cycling NMR relaxometry: instrumental improvements and new applications.

    PubMed

    Fujara, Franz; Kruk, Danuta; Privalov, Alexei F

    2014-10-01

    The paper reviews recent progress in field cycling (FC) NMR instrumentation and its application to solid state physics. Special emphasis is put on our own work during the last 15years on instrumentation, theory and applications. As far as instrumentation is concerned we report on our development of two types of electronical FC relaxometers, a mechanical FC relaxometer and a combination of FC and one-dimensional microimaging. Progress has been achieved with respect to several parameters such as the accessible field and temperature range as well as the incorporation of sample spinning. Since an appropriate analysis of FC data requires a careful consideration of relaxation theory, we include a theory section discussing the most relevant aspects of relaxation in solids which are related to residual dipolar and quadrupolar interactions. The most important limitations of relaxation theory are also discussed. With improved instrumentation and with the help of relaxation theory we get access to interesting new applications such as ionic motion in solid electrolytes, structure determination in molecular crystals, ultraslow polymer dynamics and rotational resonance phenomena.

  5. [Clinical evaluation of female pelvic tumors : Application fields of integrated PET/MRI].

    PubMed

    Grueneisen, J; Umutlu, L

    2016-07-01

    Integrated positron emission tomography (PET) and magnetic resonance imaging (MRI) scanning has recently become established in clinical imaging. Various studies have demonstrated the great potential of this new hybrid imaging procedure for applications in the field of oncology and the diagnostics of inflammatory processes. With initial studies demonstrating the feasibility and high diagnostic potential of PET/MRI comparable to PET-computed tomography (CT), the focus of future studies should be on the identification of application fields with a potential diagnostic benefit of PET/MRI over other established diagnostic tools. Both MRI and PET/CT are widely used in the diagnostic algorithms for malignancies of the female pelvis. A simultaneous acquisition of PET and MRI data within a single examination provides complementary information which can be used for a more comprehensive evaluation of the primary tumor as well as for whole body staging. Therefore, the aim of this article is to outline potential clinical applications of integrated PET/MRI for the diagnostic work-up of primary or recurrent gynecological neoplasms of the female pelvis. PMID:27315240

  6. Application of magnetic fields in industrial growth of silicon single crystals

    NASA Astrophysics Data System (ADS)

    von Ammon, W.; Gelfgat, Yu.; Gorbunov, L.; Mulbauer, A.; Muiznieks, A.; Makarov, Y.; Virbulis, J.; Muller, G.

    2006-12-01

    The use of magnetic fields for the growth of semiconductor crystals has already been considered many decades ago. As early as in 1966, Chedzey et al te{1} and Utech et al te{2} reported about InSb crystals grown in a horizontal boat under the influence of a magnetic field. They found a suppression of temperature fluctuations in the InSb melt and a decrease of growth variations (striations) in the crystal. In 1970, Witt et al te{3} applied a static transverse (horizontal) magnetic field to the Czochralski (CZ) growth of InSb crystals. 10 years later, in 1980, the transverse field was also used for the CZ growth of silicon single crystals te{4,5}. Since then, the method has received considerable attention over the years. One of the major driving forces for introducing magnetic fields in the industrial CZ growth of silicon crystals was the request by the semiconductor industry to replace floating zone (FZ) grown crystals, which had been the preferred substrate material for the manufacturing of high power devices, by low oxygen CZ crystals te{6}. The reason for this changeover was the fact that the FZ method in the early 80's could not follow the rapid crystal diameter increase as required by the industry, namely, the switch from 4" to 5" diameter in the early 80's. The application of magnetic fields to the CZ technique (MCZ) allowed the growth of low oxygen crystals with the required diameter and having similar properties as the FZ grown crystals. Figs 12, Refs 59.

  7. A novel CMOS electric field imager for lab-on-a-chip and biomedical applications

    NASA Astrophysics Data System (ADS)

    Ghallab, Yehya Hassan

    Lab-on-a-chip technology is exciting the interest of scientists in many areas. This technology can be used to synthesize chemicals, biological, cancer cells, and DNA efficiently and economically. Dielectrophoresis (DEP) is a fairly well known phenomenon for manipulating and controlling neutral particles. Recently there have been reports of the merging of the robustness of both lab-on-a-chip and DEP phenomenon, such that lab-on-a-chip based on DEP phenomenon has appeared. In support of this research work, this thesis discusses the development of a novel CMOS electric field imager for lab-on-a-chip applications. The imager contains both the sensing and actuation parts in a single chip. The actuation part is a quadupole electrode to apply the required DEP electric field. The sensing part consists of an array of novel electric field sensors, named Differential Electric Field Sensitive Field Effect Transistor (DeFET). Experimental and simulation results show that the chip can process the sensing and the actuation junctions simultaneously and it can trap, concentrate, and quantify biocells. Moreover, the proposed electric field imager can work with the biological systems at the cell level and it can extract real time information about the biological cells behavior using direct measurements. Finally, a novel Current-mode Instrumentation Amplifier (CMIA) is presented that utilizes an Operational Floating Current Conveyor (OFCC) as a basic building block. The proposed CMIA has been analyzed, simulated and experimentally tested. The experimental results verify that the proposed CMIA outperforms existing CMIAs in terms of the number of basic building blocks used, differential gain and CMRR.

  8. Field control of multiferroic spherical core-shell nanocomposites with applications in microwave range

    NASA Astrophysics Data System (ADS)

    Ionescu, D.; Kovaci, M.

    2015-11-01

    Muliferroic spherical nanoparticle configurations consisting of magnetostrictive core encapsulated in piezoelectric shell have been studied. The particles were simulated in a test configuration with help of the HFSS 13.0 (by Ansoft). An external magnetic field H0 was applied, which determines the apparition of dipolar electric fields of tens of milivolts around nanoparticle structures, used for tuning and control of different microstructures, at molecular level and in spintronics. The nanoparticle compounds are: an A2BB'O6 double perovskite with large piezoelectric coefficients and a MeFe2O4 spinel or a AFe12O19 M-type hexagonal ferrite with large magnetostriction, resulting in nanoparticle configurations with large magnetoeletric (ME) effect. The strength of the ME effect is also increased by the effect of the closed-packed shape of the spherical core-shell configuration. Different magnetic phases (spinel versus hexaferrite) were considered, in order to determine their influence in the interaction process with the applied magnetic field. The diameter of the piezoelectric shell did not exceeded 300 nm, starting from about 50 nm. The components of the magnetoelectric coefficient tensor and the effective electric and magnetic susceptibilities have been determined by simulation in microwave range (2 - 8 GHz for spinel compounds, respectively 12 - 28 GHz for hexaferrite compounds), for different magnetic fields applied for control (0 - 400 Oe), fields depending on particles size. The tensor components depend on the physical properties of the constituents and also on the constituents geometry and relative position. Nanoparticle configurations geometry and the applied H0 field were modified in order to obtain a convenient variation and control of the compound susceptibilities. Graphs are available for choosing the optimal configuration and parameter values for a specific application.

  9. Near real-time GRACE gravity field solutions for hydrological monitoring applications

    NASA Astrophysics Data System (ADS)

    Kvas, Andreas; Gouweleeuw, Ben; Mayer-Gürr, Torsten; Güntner, Andreas

    2016-04-01

    Within the EGSIEM (European Gravity Service for Improved Emergency Management) project, a demonstrator for a near real-time (NRT) gravity field service which provides daily GRACE gravity field solutions will be established. Compared to the official GRACE gravity products, these NRT solutions will increase the temporal resolution from one month to one day and reduce the latency from currently two months to five days. This fast availability allows the monitoring of total water storage variations and of hydrological extreme events as they occur, in contrast to a 'confirmation after occurrence' as is the situation today. The service will be jointly run by GFZ (German Research Centre for Geosciences) and Graz University of Technology, with each analysis center providing an independent solution. A Kalman filter framework, in which GRACE data is combined with prior information, serves as basis for the gravity field recovery in order to increase the redundancy of the gravity field estimates. The on-line nature of the NRT service necessitates a tailored smoothing algorithm as opposed to post-processing applications, where forward-backward smoothing can be applied. This contribution gives an overview on the near real-time processing chain and highlights differences between the computed NRT solutions and the standard GRACE products. We discuss the special characteristics of the Kalman filtered gravity field models as well as derived products and give an estimate of the expected error levels. Additionally, we show the added value of the NRT solutions through comparison of the first results of the pre-operational phase with in-situ data and monthly GRACE gravity field models.

  10. Recent Applications of Coaxial and Emulsion Electrospinning Methods in the Field of Tissue Engineering

    PubMed Central

    McClellan, Phillip; Landis, William J.

    2016-01-01

    Abstract Electrospinning has emerged as an effective method of producing nanoscale fibers for use in multiple fields of study. One area of significant interest is nanofiber utilization for tissue engineering because the nanofibrous mats can mimic the native extracellular matrix of biological tissues. A logical next step is the inclusion of certain molecules and compounds to accelerate or increase the efficacy of tissue regeneration. Two methods are under scrutiny for their capability to encapsulate therapeutic compounds within electrospun nanofibers: emulsion and coaxial electrospinning. Both have advantages and disadvantages, which need to be taken into careful consideration when deciding to use them in a specific application. Several examples are provided here to highlight the vast potential of multilayered nanofibers as well as the emergence of new techniques to produce three-dimensional scaffolds of nanofibers for use in the field of tissue engineering.

  11. Recent Applications of Coaxial and Emulsion Electrospinning Methods in the Field of Tissue Engineering.

    PubMed

    McClellan, Phillip; Landis, William J

    2016-01-01

    Electrospinning has emerged as an effective method of producing nanoscale fibers for use in multiple fields of study. One area of significant interest is nanofiber utilization for tissue engineering because the nanofibrous mats can mimic the native extracellular matrix of biological tissues. A logical next step is the inclusion of certain molecules and compounds to accelerate or increase the efficacy of tissue regeneration. Two methods are under scrutiny for their capability to encapsulate therapeutic compounds within electrospun nanofibers: emulsion and coaxial electrospinning. Both have advantages and disadvantages, which need to be taken into careful consideration when deciding to use them in a specific application. Several examples are provided here to highlight the vast potential of multilayered nanofibers as well as the emergence of new techniques to produce three-dimensional scaffolds of nanofibers for use in the field of tissue engineering. PMID:27610268

  12. Application of the Monte Carlo Method for the Estimation of Uncertainty in Radiofrequency Field Spot Measurements

    NASA Astrophysics Data System (ADS)

    Iakovidis, S.; Apostolidis, C.; Samaras, T.

    2015-04-01

    The objective of the present work is the application of the Monte Carlo method (GUMS1) for evaluating uncertainty in electromagnetic field measurements and the comparison of the results with the ones obtained using the 'standard' method (GUM). In particular, the two methods are applied in order to evaluate the field measurement uncertainty using a frequency selective radiation meter and the Total Exposure Quotient (TEQ) uncertainty. Comparative results are presented in order to highlight cases where GUMS1 results deviate significantly from the ones obtained using GUM, such as the presence of a non-linear mathematical model connecting the inputs with the output quantity (case of the TEQ model) or the presence of a dominant nonnormal distribution of an input quantity (case of U-shaped mismatch uncertainty). The deviation of the results obtained from the two methods can even lead to different decisions regarding the conformance with the exposure reference levels.

  13. Recent Applications of Coaxial and Emulsion Electrospinning Methods in the Field of Tissue Engineering

    PubMed Central

    McClellan, Phillip; Landis, William J.

    2016-01-01

    Abstract Electrospinning has emerged as an effective method of producing nanoscale fibers for use in multiple fields of study. One area of significant interest is nanofiber utilization for tissue engineering because the nanofibrous mats can mimic the native extracellular matrix of biological tissues. A logical next step is the inclusion of certain molecules and compounds to accelerate or increase the efficacy of tissue regeneration. Two methods are under scrutiny for their capability to encapsulate therapeutic compounds within electrospun nanofibers: emulsion and coaxial electrospinning. Both have advantages and disadvantages, which need to be taken into careful consideration when deciding to use them in a specific application. Several examples are provided here to highlight the vast potential of multilayered nanofibers as well as the emergence of new techniques to produce three-dimensional scaffolds of nanofibers for use in the field of tissue engineering. PMID:27610268

  14. Recent Applications of Coaxial and Emulsion Electrospinning Methods in the Field of Tissue Engineering.

    PubMed

    McClellan, Phillip; Landis, William J

    2016-01-01

    Electrospinning has emerged as an effective method of producing nanoscale fibers for use in multiple fields of study. One area of significant interest is nanofiber utilization for tissue engineering because the nanofibrous mats can mimic the native extracellular matrix of biological tissues. A logical next step is the inclusion of certain molecules and compounds to accelerate or increase the efficacy of tissue regeneration. Two methods are under scrutiny for their capability to encapsulate therapeutic compounds within electrospun nanofibers: emulsion and coaxial electrospinning. Both have advantages and disadvantages, which need to be taken into careful consideration when deciding to use them in a specific application. Several examples are provided here to highlight the vast potential of multilayered nanofibers as well as the emergence of new techniques to produce three-dimensional scaffolds of nanofibers for use in the field of tissue engineering.

  15. Microplatforms for gradient field generation of various properties and biological applications.

    PubMed

    Kim, Sung-Hwan; Lee, Gi-Hun; Park, Joong Yull; Lee, Sang-Hoon

    2015-04-01

    Well-designed microfluidic platforms can be excellent tools to eliminate bottleneck problems or issues that have arisen in biological fields by providing unprecedented high-resolution control of mechanical and chemical microenvironments for cell culture. Among such microtechnologies, the precise generation of biochemical concentration gradients has been highly regarded in the biorelated scientific fields; even today, the principles and mechanisms for gradient generation continue to be refined, and the number of applications for this technique is growing. Here, we review the current status of the concentration gradient generation technologies achieved in various microplatforms and how they have been and will be applied to biological issues, particularly those that have arisen from cancer research, stem cell research, and tissue engineering. We also provide information about the advances and future challenges in the technological aspects of microscale concentration gradient generation.

  16. Electro-active device using radial electric field piezo-diaphragm for sonic applications

    NASA Technical Reports Server (NTRS)

    Bryant, Robert G. (Inventor); Fox, Robert L. (Inventor)

    2005-01-01

    An electro-active transducer for sonic applications includes a ferroelectric material sandwiched by first and second electrode patterns to form a piezo-diaphragm coupled to a mounting frame. When the device is used as a sonic actuator, the first and second electrode patterns are configured to introduce an electric field into the ferroelectric material when voltage is applied to the electrode patterns. When the device is used as a sonic sensor, the first and second electrode patterns are configured to introduce an electric field into the ferroelectric material when the ferroelectric material experiences deflection in a direction substantially perpendicular thereto. In each case, the electrode patterns are designed to cause the electric field to: i) originate at a region of the ferroelectric material between the first and second electrode patterns, and ii) extend radially outward from the region of the ferroelectric material (at which the electric field originates) and substantially parallel to the plane of the ferroelectric material. The mounting frame perimetrically surrounds the peizo-diaphragm and enables attachment of the piezo-diaphragm to a housing.

  17. Is cepstrum averaging applicable to circularly polarized electric-field data?

    NASA Astrophysics Data System (ADS)

    Tunnell, T.

    1990-04-01

    In FY 1988 a cepstrum averaging technique was developed to eliminate the ground reflections from charged particle beam (CPB) electromagnetic pulse (EMP) data. The work was done for the Los Alamos National Laboratory Project DEWPOINT at SST-7. The technique averages the cepstra of horizontally and vertically polarized electric field data (i.e., linearly polarized electric field data). This cepstrum averaging technique was programmed into the FORTRAN codes CEP and CEPSIM. Steve Knox, the principal investigator for Project DEWPOINT, asked the authors to determine if the cepstrum averaging technique could be applied to circularly polarized electric field data. The answer is, Yes, but some modifications may be necessary. There are two aspects to this answer that we need to address, namely, the Yes and the modifications. First, regarding the Yes, the technique is applicable to elliptically polarized electric field data in general: circular polarization is a special case of elliptical polarization. Secondly, regarding the modifications, greater care may be required in computing the phase in the calculation of the complex logarithm. The calculation of the complex logarithm is the most critical step in cepstrum-based analysis. This memorandum documents these findings.

  18. Application of a wide-field phantom eye for optical coherence tomography and reflectance imaging

    NASA Astrophysics Data System (ADS)

    Corcoran, Anthony; Muyo, Gonzalo; van Hemert, Jano; Gorman, Alistair; Harvey, Andrew R.

    2015-12-01

    Optical coherence tomography (OCT) and reflectance imaging are used in clinical practice to measure the thickness and transverse dimensions of retinal features. The recent trend towards increasing the field of view (FOV) of these devices has led to an increasing significance of the optical aberrations of both the human eye and the device. We report the design, manufacture and application of the first phantom eye that reproduces the off-axis optical characteristics of the human eye, and allows the performance assessment of wide-field ophthalmic devices. We base our design and manufacture on the wide-field schematic eye, [Navarro, R. J. Opt. Soc. Am. A, 1985, 2.] as an accurate proxy to the human eye and enable assessment of ophthalmic imaging performance for a ? external FOV. We used multi-material 3D-printed retinal targets to assess imaging performance of the following ophthalmic instruments: the Optos 200Tx, Heidelberg Spectralis, Zeiss FF4 fundus camera and Optos OCT SLO and use the phantom to provide an insight into some of the challenges of wide-field OCT.

  19. Electrical field: a historical review of its application and contributions in wastewater sludge dewatering.

    PubMed

    Mahmoud, Akrama; Olivier, Jérémy; Vaxelaire, Jean; Hoadley, Andrew F A

    2010-04-01

    Electric field-assisted dewatering, also called electro-dewatering, is a technology in which a conventional dewatering mechanism such a pressure dewatering is combined with electrokinetic effects to realize an improved liquid/solids separation, to increase the final dry solids content and to accelerate the dewatering process with low energy consumption compared to thermal drying. Electro-dewatering is not a new idea, but the practical industrial applications have been limited to niche areas in soil mechanics, civil engineering, and the ceramics industry. Recently, it has received great attention, specially, in the fields of fine-particle sludge, gelatinous sludge, sewage sludge, pharmaceutical industries, food waste and bull kelp, which could not be successfully dewatered with conventional mechanical methods. This review focuses on the scientific and practical aspects of the application of an electrical field in laboratory/industrial dewatering, and discusses this in relation to conventional dewatering techniques. A comprehensive bibliography of research in the electro-dewatering of wastewater sludges is included. As the fine-particle suspensions possess a surface charge, usually negative, they are surrounded by a layer with a higher density of positive charges, the electric double layer. When an electric field is applied, the usually negative charged particles move towards the electrode of the opposite charge. The water, commonly with cations, is driven towards the negative electrode. Electro-dewatering thus involves the well-known phenomena of electrophoresis, electro-osmosis, and electromigration. Following a detailed outline of the role of the electric double layer and electrokinetic phenomena, an analysis of the components of applied voltage and their significance is presented from an electrochemical viewpoint. The aim of this elementary analysis is to provide a fundamental understanding of the different process variables and configurations in order to

  20. Silicon-on-insulator field effect transistor with improved body ties for rad-hard applications

    DOEpatents

    Schwank, James R.; Shaneyfelt, Marty R.; Draper, Bruce L.; Dodd, Paul E.

    2001-01-01

    A silicon-on-insulator (SOI) field-effect transistor (FET) and a method for making the same are disclosed. The SOI FET is characterized by a source which extends only partially (e.g. about half-way) through the active layer wherein the transistor is formed. Additionally, a minimal-area body tie contact is provided with a short-circuit electrical connection to the source for reducing floating body effects. The body tie contact improves the electrical characteristics of the transistor and also provides an improved single-event-upset (SEU) radiation hardness of the device for terrestrial and space applications. The SOI FET also provides an improvement in total-dose radiation hardness as compared to conventional SOI transistors fabricated without a specially prepared hardened buried oxide layer. Complementary n-channel and p-channel SOI FETs can be fabricated according to the present invention to form integrated circuits (ICs) for commercial and military applications.

  1. Simulation of GeSn/Ge tunneling field-effect transistors for complementary logic applications

    NASA Astrophysics Data System (ADS)

    Liu, Lei; Liang, Renrong; Wang, Jing; Xiao, Lei; Xu, Jun

    2016-09-01

    GeSn/Ge tunneling field-effect transistors (TFETs) with different device configurations are comprehensively investigated by numerical simulation. The lateral PIN- and PNPN-type point-tunneling and vertical line-tunneling device structures are analyzed and compared. Both n- and p-type TFETs are optimized to construct GeSn complementary logic applications. Simulation results indicate that GeSn/Ge heterochannel and heterosource structures significantly improve the device characteristics of point- and line-TFETs, respectively. Device performance and subthreshold swing can be further improved by increasing the Sn composition. GeSn/Ge heterosource line-TFETs exhibit excellent device performance and superior inverter voltage-transfer characteristic, which make them promising candidates for GeSn complementary TFET applications.

  2. Improving mass transfer to soften tissues by pulsed electric fields: fundamentals and applications.

    PubMed

    Puértolas, E; Luengo, E; Álvarez, I; Raso, J

    2012-01-01

    The mass transfer phenomenon occurs in many operations of the food industry with the purpose of obtaining a given substance of interest, removing water from foods, or introducing a given substance into the food matrix. Pretreatments that modify the permeability of the cell membranes, such as grinding, heating, or enzymatic treatment, enhance the mass transfer. However, these techniques may require a significant amount of energy and can cause losses of valuable food compounds. Pulsed electric field (PEF) technology is a nonthermal processing method that causes permeabilization of cell membranes using low energy requirements and minimizing quality deterioration of the food compounds. Many practical applications of PEF for enhancing mass transfer in the food industry have been investigated. The purpose of this chapter is to give an overview of the state of the art of application of PEF for improving mass transfer in the food industry.

  3. Separable Markov random field model and its applications in low level vision.

    PubMed

    Sun, Jian; Tappen, Marshall F

    2013-01-01

    This brief proposes a continuously-valued Markov random field (MRF) model with separable filter bank, denoted as MRFSepa, which significantly reduces the computational complexity in the MRF modeling. In this framework, we design a novel gradient-based discriminative learning method to learn the potential functions and separable filter banks. We learn MRFSepa models with 2-D and 3-D separable filter banks for the applications of gray-scale/color image denoising and color image demosaicing. By implementing MRFSepa model on graphics processing unit, we achieve real-time image denoising and fast image demosaicing with high-quality results.

  4. Application of luminescence to the field screening of chemical contaminants in the environment

    SciTech Connect

    Steinberg, S.M.; Poziomek, E.J.; Engelmann, W.H.; Rogers, K.R.

    1995-12-31

    Luminescence methods, which include fluorescence, phosphorescence, bioluminescence and chemiluminescence have been employed as analytical methods for a variety of environmental pollutants, to measure biomass, and to elucidate toxic and mutagenic effects. The recent analytical literature on the application of luminescence techniques to measurement of various classes of environmentally-significant chemicals has been reviewed. The advantages and disadvantages of luminescence for field screening measurements are discussed. The major advantages projected for luminescence versus traditional methods are greater sample throughput, simplicity, and in some cases, greater selectivity and sensitivity. 52 refs.

  5. On the energy transfer between the electromagnetic field and nanomachines for biological applications.

    PubMed

    Bellizzi, G; Bucci, O M; Capozzoli, A

    2008-07-01

    The article presents a simple expression of the power transferred from the electromagnetic field (EMF) to a biological nanomachine (NM) embedded in a background medium (BM). The expression is useful to analyse the interaction mechanism and test the hypothesis on its nature. Furthermore, it should represent a helpful tool to design remotely controlled NMs for bio-medical applications and the relative electromagnetic control apparatuses. Finally, to show its practical usefulness, we used it to discuss the hypothesis on the energy transfer mechanism proposed in the literature to explain intriguing experimental phenomena referring to the remotely controlled dehybridization of DNA molecules attached to gold nanocrystals.

  6. Design and test of field programmable gate arrays in space applications

    NASA Technical Reports Server (NTRS)

    Mckerracher, Priscilla L.; Cain, Russel P.; Barnett, Jon C.; Green, William S.; Kinnison, James D.

    1992-01-01

    Field Programmable Gate Arrays (FPGAU's) offer substantial benefits in terms of flexibility and design integration. In addition to qualifying this device for space applications by establishing its reliability and evaluating its sensitivity to radiation, screening the programmed devices with Automatic Test Equipment (ATE) and functional burn-in presents an interesting challenge. This paper presents a review of the design, qualification, and screening cycle employed for FPGA designs in a space program, and demonstrates the need for close interaction between design and test engineers.

  7. A slotted waveguide field applicator to sustain large diameter uniform plasma cylinders.

    PubMed

    Wu, C; Zhan, R; Huang, W

    2000-01-01

    We describe a slotted waveguide field applicator and present the results of experimental investigation. The experimental results show that it can efficiently transfer power to plasma in the wide pressure range. Specially, it is able to produce a large diameter uniform plasma cylinder with diameter over 160 mm. The electron temperature and density are 2-4 eV and 10(10)-10(11) cm-3, respectively, under conditions of the pressure below 135 Pa and the microwave power 500-900 w. In addition, the primary study of the surface-wave modes indicate that the mode of m = 6 can be excited and propagate.

  8. The actual status of Astronomy in Moldova

    NASA Astrophysics Data System (ADS)

    Gaina, A.

    The astronomical research in the Republic of Moldova after Nicolae Donitch (Donici)(1874-1956(?)) were renewed in 1957, when a satellites observations station was open in Chisinau. Fotometric observations and rotations of first Soviet artificial satellites were investigated under a program SPIN put in action by the Academy of Sciences of former Socialist Countries. The works were conducted by Assoc. prof. Dr. V. Grigorevskij, which conducted also research in variable stars. Later, at the beginning of 60-th, an astronomical Observatory at the Chisinau State University named after Lenin (actually: the State University of Moldova), placed in Lozovo-Ciuciuleni villages was open, which were coordinated by Odessa State University (Prof. V.P. Tsesevich) and the Astrosovet of the USSR. Two main groups worked in this area: first conducted by V. Grigorevskij (till 1971) and second conducted by L.I. Shakun (till 1988), both graduated from Odessa State University. Besides this research areas another astronomical observations were made: Comets observations, astroclimate and atmospheric optics in collaboration with the Institute of the Atmospheric optics of the Siberian branch of the USSR (V. Chernobai, I. Nacu, C. Usov and A.F. Poiata). Comets observations were also made since 1988 by D. I. Gorodetskij which came to Chisinau from Alma-Ata and collaborated with Ukrainean astronomers conducted by K.I. Churyumov. Another part of space research was made at the State University of Tiraspol since the beggining of 70-th by a group of teaching staff of the Tiraspol State Pedagogical University: M.D. Polanuer, V.S. Sholokhov. No a collaboration between Moldovan astronomers and Transdniestrian ones actually exist due to War in Transdniestria in 1992. An important area of research concerned the Radiophysics of the Ionosphere, which was conducted in Beltsy at the Beltsy State Pedagogical Institute by a group of teaching staff of the University since the beginning of 70-th: N. D. Filip, E

  9. MODIS Solar Diffuser: Modelled and Actual Performance

    NASA Technical Reports Server (NTRS)

    Waluschka, Eugene; Xiong, Xiao-Xiong; Esposito, Joe; Wang, Xin-Dong; Krebs, Carolyn (Technical Monitor)

    2001-01-01

    The Moderate Resolution Imaging Spectroradiometer (MODIS) instrument's solar diffuser is used in its radiometric calibration for the reflective solar bands (VIS, NTR, and SWIR) ranging from 0.41 to 2.1 micron. The sun illuminates the solar diffuser either directly or through a attenuation screen. The attenuation screen consists of a regular array of pin holes. The attenuated illumination pattern on the solar diffuser is not uniform, but consists of a multitude of pin-hole images of the sun. This non-uniform illumination produces small, but noticeable radiometric effects. A description of the computer model used to simulate the effects of the attenuation screen is given and the predictions of the model are compared with actual, on-orbit, calibration measurements.

  10. HIGH-CURRENT COLD CATHODE FIELD EMISSION ARRAY FOR ELECTRON LENS APPLICATION

    SciTech Connect

    Hirshfield, Jay L

    2012-12-28

    During Phase I, the following goals were achieved: (1) design and fabrication of a novel, nano-dimensional CNT field emitter assembly for high current density application, with high durability; (2) fabrication of a ceramic based micro channel plate (MCP) and characterization of its secondary electron emission; and (3) characterizing the CNT/MCP cathode for high field emission and durability. As a result of these achievements, a relatively high current density of ~ 1.2 A/cm2 from a CNT cathode and single channel MCP were measured. The emission current was also extremely stable with a peak-to-peak variation of only 1.8%. The emission current could be further enhanced to meet requirements for electron lens applications by increasing the number of MCP channels. A calculation for maximum possible current density with a 1200 channel/cm2 MCP, placed over a cathode with 1200 uniformly functioning CNTs, would be ~1.46 kA/cm2, neglecting space charge limitations. Clearly this level of emission is far greater than what is needed for the electron lens application, but it does offer a highly comforting margin to account for sub-standard emitters and/or to allow the lesser challenge of building a cathode with fewer channels/cm2. A satisfactory goal for the electron lens application would be a controllable emission of 2-4 mA per channel in an ensemble of 800-1200 uniformly-functioning channels/cm2, and a cathode with overall area of about 1 cm2.

  11. Multipolar Ewald Methods, 2: Applications Using a Quantum Mechanical Force Field

    PubMed Central

    2015-01-01

    A fully quantum mechanical force field (QMFF) based on a modified “divide-and-conquer” (mDC) framework is applied to a series of molecular simulation applications, using a generalized Particle Mesh Ewald method extended to multipolar charge densities. Simulation results are presented for three example applications: liquid water, p-nitrophenylphosphate reactivity in solution, and crystalline N,N-dimethylglycine. Simulations of liquid water using a parametrized mDC model are compared to TIP3P and TIP4P/Ew water models and experiment. The mDC model is shown to be superior for cluster binding energies and generally comparable for bulk properties. Examination of the dissociative pathway for dephosphorylation of p-nitrophenylphosphate shows that the mDC method evaluated with the DFTB3/3OB and DFTB3/OPhyd semiempirical models bracket the experimental barrier, whereas DFTB2 and AM1/d-PhoT QM/MM simulations exhibit deficiencies in the barriers, the latter for which is related, in part, to the anomalous underestimation of the p-nitrophenylate leaving group pKa. Simulations of crystalline N,N-dimethylglycine are performed and the overall structure and atomic fluctuations are compared with the experiment and the general AMBER force field (GAFF). The QMFF, which was not parametrized for this application, was shown to be in better agreement with crystallographic data than GAFF. Our simulations highlight some of the application areas that may benefit from using new QMFFs, and they demonstrate progress toward the development of accurate QMFFs using the recently developed mDC framework. PMID:25691830

  12. Multipolar Ewald methods, 2: applications using a quantum mechanical force field.

    PubMed

    Giese, Timothy J; Panteva, Maria T; Chen, Haoyuan; York, Darrin M

    2015-02-10

    A fully quantum mechanical force field (QMFF) based on a modified “divide-and-conquer” (mDC) framework is applied to a series of molecular simulation applications, using a generalized Particle Mesh Ewald method extended to multipolar charge densities. Simulation results are presented for three example applications: liquid water, p-nitrophenylphosphate reactivity in solution, and crystalline N,N-dimethylglycine. Simulations of liquid water using a parametrized mDC model are compared to TIP3P and TIP4P/Ew water models and experiment. The mDC model is shown to be superior for cluster binding energies and generally comparable for bulk properties. Examination of the dissociative pathway for dephosphorylation of p-nitrophenylphosphate shows that the mDC method evaluated with the DFTB3/3OB and DFTB3/OPhyd semiempirical models bracket the experimental barrier, whereas DFTB2 and AM1/d-PhoT QM/MM simulations exhibit deficiencies in the barriers, the latter for which is related, in part, to the anomalous underestimation of the p-nitrophenylate leaving group pKa. Simulations of crystalline N,N-dimethylglycine are performed and the overall structure and atomic fluctuations are compared with the experiment and the general AMBER force field (GAFF). The QMFF, which was not parametrized for this application, was shown to be in better agreement with crystallographic data than GAFF. Our simulations highlight some of the application areas that may benefit from using new QMFFs, and they demonstrate progress toward the development of accurate QMFFs using the recently developed mDC framework.

  13. 7 CFR 1437.101 - Actual production history.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 10 2014-01-01 2014-01-01 false Actual production history. 1437.101 Section 1437.101... Determining Yield Coverage Using Actual Production History § 1437.101 Actual production history. Actual production history (APH) is the unit's record of crop yield by crop year for the APH base period. The...

  14. 7 CFR 1437.101 - Actual production history.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 10 2012-01-01 2012-01-01 false Actual production history. 1437.101 Section 1437.101... Determining Yield Coverage Using Actual Production History § 1437.101 Actual production history. Actual production history (APH) is the unit's record of crop yield by crop year for the APH base period. The...

  15. 7 CFR 1437.101 - Actual production history.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 10 2011-01-01 2011-01-01 false Actual production history. 1437.101 Section 1437.101... Determining Yield Coverage Using Actual Production History § 1437.101 Actual production history. Actual production history (APH) is the unit's record of crop yield by crop year for the APH base period. The...

  16. 7 CFR 1437.101 - Actual production history.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 10 2013-01-01 2013-01-01 false Actual production history. 1437.101 Section 1437.101... Determining Yield Coverage Using Actual Production History § 1437.101 Actual production history. Actual production history (APH) is the unit's record of crop yield by crop year for the APH base period. The...

  17. 7 CFR 1437.101 - Actual production history.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false Actual production history. 1437.101 Section 1437.101... Determining Yield Coverage Using Actual Production History § 1437.101 Actual production history. Actual production history (APH) is the unit's record of crop yield by crop year for the APH base period. The...

  18. Biological and Agricultural Studies on Application of Discharge Plasma and Electromagnetic Fields 5. Effects of High Electric Fields on Animals

    NASA Astrophysics Data System (ADS)

    Isaka, Katsuo

    The biological effects of extremely low frequency electric fields on animals are reviewed with emphasis on studies of the nervous system, behavior, endocrinology, and blood chemistry. First, this paper provides a histrical overview of studies on the electric field effects initiated in Russia and the United States mainly regarding electric utility workers in high voltage substations and transmission lines. Then, the possible mechanisms of electric field effects are explained using the functions of surface electric fields and induced currents in biological objects. The real mechanisms have not yet been identified. The thresholds of electric field perception levels for rats, baboons, and humans are introduced and compared. The experimental results concerning the depression of melatonin secretion in rats exposed to electric fields are described.

  19. Two-photon absorption induced by electric field gradient of optical near-field and its application to photolithography

    SciTech Connect

    Yamaguchi, Maiku; Kawazoe, Tadashi; Yatsui, Takashi; Nobusada, Katsuyuki

    2015-05-11

    An electric field gradient is an inherent property of the optical near-field (ONF). We investigated its effect on electron excitation in a quantum dot via model calculations combining a density matrix formalism and a classical Lorentz model. The electric field gradient of the ONF was found to cause two-photon absorption by an unusual mechanism. Furthermore, the absorption exhibits a nonmonotonic dependence on the spatial arrangement of the nanosystem, completely different from that of conventional two-photon absorption induced by an intense electric field. The present two-photon absorption process was verified in a previous experimental observation by reinterpreting the results of ONF photolithography.

  20. Magneto-frictional Modeling of Coronal Nonlinear Force-free Fields. II. Application to Observations

    NASA Astrophysics Data System (ADS)

    Guo, Y.; Xia, C.; Keppens, R.

    2016-09-01

    A magneto-frictional module has been implemented and tested in the Message Passing Interface Adaptive Mesh Refinement Versatile Advection Code (MPI-AMRVAC) in the first paper of this series. Here, we apply the magneto-frictional method to observations to demonstrate its applicability in both Cartesian and spherical coordinates, and in uniform and block-adaptive octree grids. We first reconstruct a nonlinear force-free field (NLFFF) on a uniform grid of 1803 cells in Cartesian coordinates, with boundary conditions provided by the vector magnetic field observed by the Helioseismic and Magnetic Imager (HMI) on board the Solar Dynamics Observatory (SDO) at 06:00 UT on 2010 November 11 in active region NOAA 11123. The reconstructed NLFFF successfully reproduces the sheared and twisted field lines and magnetic null points. Next, we adopt a three-level block-adaptive grid to model the same active region with a higher spatial resolution on the bottom boundary and a coarser treatment of regions higher up. The force-free and divergence-free metrics obtained are comparable to the run with a uniform grid, and the reconstructed field topology is also very similar. Finally, a group of active regions, including NOAA 11401, 11402, 11405, and 11407, observed at 03:00 UT on 2012 January 23 by SDO/HMI is modeled with a five-level block-adaptive grid in spherical coordinates, where we reach a local resolution of 0\\buildrel{\\circ}\\over{.} 06 pixel‑1 in an area of 790 Mm × 604 Mm. Local high spatial resolution and a large field of view in NLFFF modeling can be achieved simultaneously in parallel and block-adaptive magneto-frictional relaxations.

  1. Thermodynamic Model Formulations for Inhomogeneous Solids with Application to Non-isothermal Phase Field Modelling

    NASA Astrophysics Data System (ADS)

    Gladkov, Svyatoslav; Kochmann, Julian; Reese, Stefanie; Hütter, Markus; Svendsen, Bob

    2016-04-01

    The purpose of the current work is the comparison of thermodynamic model formulations for chemically and structurally inhomogeneous solids at finite deformation based on "standard" non-equilibrium thermodynamics [SNET: e. g. S. de Groot and P. Mazur, Non-equilibrium Thermodynamics, North Holland, 1962] and the general equation for non-equilibrium reversible-irreversible coupling (GENERIC) [H. C. Öttinger, Beyond Equilibrium Thermodynamics, Wiley Interscience, 2005]. In the process, non-isothermal generalizations of standard isothermal conservative [e. g. J. W. Cahn and J. E. Hilliard, Free energy of a non-uniform system. I. Interfacial energy. J. Chem. Phys. 28 (1958), 258-267] and non-conservative [e. g. S. M. Allen and J. W. Cahn, A macroscopic theory for antiphase boundary motion and its application to antiphase domain coarsening. Acta Metall. 27 (1979), 1085-1095; A. G. Khachaturyan, Theory of Structural Transformations in Solids, Wiley, New York, 1983] diffuse interface or "phase-field" models [e. g. P. C. Hohenberg and B. I. Halperin, Theory of dynamic critical phenomena, Rev. Modern Phys. 49 (1977), 435-479; N. Provatas and K. Elder, Phase Field Methods in Material Science and Engineering, Wiley-VCH, 2010.] for solids are obtained. The current treatment is consistent with, and includes, previous works [e. g. O. Penrose and P. C. Fife, Thermodynamically consistent models of phase-field type for the kinetics of phase transitions, Phys. D 43 (1990), 44-62; O. Penrose and P. C. Fife, On the relation between the standard phase-field model and a "thermodynamically consistent" phase-field model. Phys. D 69 (1993), 107-113] on non-isothermal systems as a special case. In the context of no-flux boundary conditions, the SNET- and GENERIC-based approaches are shown to be completely consistent with each other and result in equivalent temperature evolution relations.

  2. Magneto-frictional Modeling of Coronal Nonlinear Force-free Fields. II. Application to Observations

    NASA Astrophysics Data System (ADS)

    Guo, Y.; Xia, C.; Keppens, R.

    2016-09-01

    A magneto-frictional module has been implemented and tested in the Message Passing Interface Adaptive Mesh Refinement Versatile Advection Code (MPI-AMRVAC) in the first paper of this series. Here, we apply the magneto-frictional method to observations to demonstrate its applicability in both Cartesian and spherical coordinates, and in uniform and block-adaptive octree grids. We first reconstruct a nonlinear force-free field (NLFFF) on a uniform grid of 1803 cells in Cartesian coordinates, with boundary conditions provided by the vector magnetic field observed by the Helioseismic and Magnetic Imager (HMI) on board the Solar Dynamics Observatory (SDO) at 06:00 UT on 2010 November 11 in active region NOAA 11123. The reconstructed NLFFF successfully reproduces the sheared and twisted field lines and magnetic null points. Next, we adopt a three-level block-adaptive grid to model the same active region with a higher spatial resolution on the bottom boundary and a coarser treatment of regions higher up. The force-free and divergence-free metrics obtained are comparable to the run with a uniform grid, and the reconstructed field topology is also very similar. Finally, a group of active regions, including NOAA 11401, 11402, 11405, and 11407, observed at 03:00 UT on 2012 January 23 by SDO/HMI is modeled with a five-level block-adaptive grid in spherical coordinates, where we reach a local resolution of 0\\buildrel{\\circ}\\over{.} 06 pixel-1 in an area of 790 Mm × 604 Mm. Local high spatial resolution and a large field of view in NLFFF modeling can be achieved simultaneously in parallel and block-adaptive magneto-frictional relaxations.

  3. Feasibility study of Nb3Al Rutherford cable for high field accelerator magnet application

    SciTech Connect

    Yamada, R.; Kikuchi, A.; Ambrosio, G.; Andreev, N.; Barzi, E.; Cooper, C.; Feher, S.; Kashikhin, V.V.; Lamm, M.; Novitski, I.; Takeuchi, T.; Tartaglia, M.; Turrioni, D.; Verweij, A.P.; Wake, M.; Willering, G; Zlobin, A.V.; /Fermilab

    2006-08-01

    Feasibility study of Cu stabilized Nb{sub 3}Al strand and Rutherford cable for the application to high field accelerator magnets are being done at Fermilab in collaboration with NIMS. The Nb{sub 3}Al strand, which was developed and manufactured at NIMS in Japan, has a non-copper Jc of about 844 A/mm{sup 2} at 15 Tesla at 4.2 K, a copper content of 50%, and filament size of about 50 microns. Rutherford cables with 27 Nb{sub 3}Al strands of 1.03 mm diameter were fabricated and tested. Quench tests on a short cable were done to study its stability with only its self field, utilizing a high current transformer. A pair of 2 meter long Nb{sub 3}Al cables was tested extensively at CERN at 4.3 and 1.9 K up to 11 Tesla including its self field with a high transport current of 20.2 kA. In the low field test we observed instability near splices and in the central region. This is related to the flux-jump like behavior, because of excessive amount of Nb in the Nb{sub 3}Al strand. There is possibility that the Nb in Nb{sub 3}Al can cause instability below 2 Tesla field regions. We need further investigation on this problem. Above 8 Tesla, we observed quenches near the critical surface at fast ramp rate from 1000 to 3000 A/sec, with quench velocity over 100 m/sec. A small racetrack magnet was made using a 14 m of Rutherford cable and successfully tested up to 21.8 kA, corresponding to 8.7 T.

  4. Controlling Charge and Current Neutralization of an Ion Beam Pulse in a Background Plasma by Application of a Solenoidal Magnetic Field I: Weak Magnetic Field Limit

    SciTech Connect

    Kaganovich, I. D., Startsev, E. A., Sefkow, A. B., Davidson, R. C.

    2008-10-10

    Propagation of an intense charged particle beam pulse through a background plasma is a common problem in astrophysics and plasma applications. The plasma can effectively neutralize the charge and current of the beam pulse, and thus provides a convenient medium for beam transport. The application of a small solenoidal magnetic field can drastically change the self-magnetic and self- electric fields of the beam pulse, thus allowing effective control of the beam transport through the background plasma. An analytic model is developed to describe the self-magnetic field of a finite- length ion beam pulse propagating in a cold background plasma in a solenoidal magnetic field. The analytic studies show that the solenoidal magnetic field starts to infuence the self-electric and self-magnetic fields when ωce > ωpeβb, where ωce = eβ/mec is the electron gyrofrequency, ωpe is the electron plasma frequency, and βb = Vb/c is the ion beam velocity relative to the speed of light. This condition typically holds for relatively small magnetic fields (about 100G). Analytical formulas are derived for the effective radial force acting on the beam ions, which can be used to minimize beam pinching. The results of analytic theory have been verified by comparison with the simulation results obtained from two particle-in-cell codes, which show good agreement.

  5. Non-canonical scalar fields and their applications in cosmology and astrophysics

    NASA Astrophysics Data System (ADS)

    Gauthier, Christopher S.

    In this thesis we will discuss several issues concerning cosmological applications of non-canonical scalar fields, which are generically referred to as k-essence. First, we consider two examples of k-essence. These are the rolling tachyon and static spherically symmetric solutions of non-canonical scalar fields in flat space. We find constraints on the form of the allowed interactions in the first case and on the choice of boundary conditions in the latter. For the rolling tachyon we find that at late times the tachyon matter behaves like a non-relativistic dust, thus making it a dark matter candidate. For the static spherically symmetric solutions we show that solutions which are finite at the origin must have negative energy density there. Next, we consider static spherically symmetric solutions of non-canonical scalar fields coupled to gravity as a way to explain dark matter halos as a coherent state of the scalar field. Consistent solutions are found with a smooth scalar profile which can describe observed rotation curves. The non-trivial solutions have negative energy density near the origin, though the total energy is positive. We also reconsider the no scalar hair theorems for black holes with emphasis on asymptotic boundary conditions and superluminal propagation. After this we show that, for general scalar fields, stationary configurations are possible for shift symmetric theories only. This symmetry with respect to constant translations in field space should either be manifest in the original field variables or reveal itself after an appropriate field redefinition. In particular this result implies that neither k-essence nor quintessence can have exact steady state/Bondi accretion onto black holes. Finally, we find that stationary field configurations are necessarily linear in Killing time, provided that shift symmetry is realized in terms of these field variables. The next discussion outlines a general program for reconstructing the action of non

  6. Application of Rotating Magnetic Fields to THM Growth Process: Te-CdTe

    NASA Technical Reports Server (NTRS)

    LeClair, Mark; Worlikar, Ani; Motakef, Shariar; Gillies, Donald C.

    1998-01-01

    The numerical simulation of ongoing traveling heater method (THM) solution growth experiments of CdTe from Te solvent and the influence of a Rotating Magnetic Field (RMF) on control of convection in the solution zone is presented. The application of RMF is pursued as a means to actively control thermo-solutal convection in the solution zone which otherwise would be dominated by buoyancy forces. Numerical simulation and scaling analysis are used to generate a flow-regime map demarcating the boundary separating the buoyancy- and RMF-driven convection in the solution zone. Results indicate that whereas at low gravity levels the application of RMF can completely overwhelm buoyancy-induced convection, at normal gravity levels the successful control of convection by RMF requires use of fairly thin solvent zones. Simulation results also indicate that field strengths required to dominate natural convection on earth may lead to instabilities and transition to turbulence, and an associated deleterious effect on the quality of grown crystals. These and other simulations results are discussed in reference to experimental evidence.

  7. Physical Analytics: An emerging field with real-world applications and impact

    NASA Astrophysics Data System (ADS)

    Hamann, Hendrik

    2015-03-01

    In the past most information on the internet has been originated by humans or computers. However with the emergence of cyber-physical systems, vast amount of data is now being created by sensors from devices, machines etc digitizing the physical world. While cyber-physical systems are subject to active research around the world, the vast amount of actual data generated from the physical world has attracted so far little attention from the engineering and physics community. In this presentation we use examples to highlight the opportunities in this new subject of ``Physical Analytics'' for highly inter-disciplinary research (including physics, engineering and computer science), which aims understanding real-world physical systems by leveraging cyber-physical technologies. More specifically, the convergence of the physical world with the digital domain allows applying physical principles to everyday problems in a much more effective and informed way than what was possible in the past. Very much like traditional applied physics and engineering has made enormous advances and changed our lives by making detailed measurements to understand the physics of an engineered device, we can now apply the same rigor and principles to understand large-scale physical systems. In the talk we first present a set of ``configurable'' enabling technologies for Physical Analytics including ultralow power sensing and communication technologies, physical big data management technologies, numerical modeling for physical systems, machine learning based physical model blending, and physical analytics based automation and control. Then we discuss in detail several concrete applications of Physical Analytics ranging from energy management in buildings and data centers, environmental sensing and controls, precision agriculture to renewable energy forecasting and management.

  8. [Study progress of spectral color science and its prospect of application in the field of Chinese medicine].

    PubMed

    Yin, Fang-zhou; Wu, Xiao-yan; Mao, Chun-qing; Ji, De; Cai, Bao-chang; Lu, Tu-lin

    2013-09-01

    The paper reviewed the research progress in the spectral color science, including the common model, color measurement instrument in recent years, application of color measurement technology in agriculture, food, industry, medicine and other fields. The possibility to achieve the color quantization of Chinese medicine was explored by color measurement technology, and analyzed its application prospect in the field of Chinese medicine, provided a model for the study on quality control for Chinese medicine non-destructive online

  9. Tracking Topographic Changes from Multitemporal Stereo Images, Application to the Nili Patera Dune Field

    NASA Astrophysics Data System (ADS)

    Avouac, J.; Ayoub, F.; Bridges, N. T.; Leprince, S.; Lucas, A.

    2012-12-01

    The High Resolution Imaging Science Experiment (HiRISE) in orbit around Mars provides images with a nominal ground resolution of 25cm. Its agility allows imaging a same scene with stereo view angles thus allowing for for Digital elevation Model (DEM) extraction through stereo-photogrammetry. This dataset thus offers an exceptional opportunity to measure the topography with high precision and track its eventual evolution with time. In this presentation, we will discuss how multi-temporal acquisitions of HiRISE images of the Nili Patera dune field allow tracking ripples migration, assess sand fluxes and dunes activity. We investigated in particular the use of multi-temporal DEMs to monitor the migration and morphologic evolution of the dune field. We present here the methodology used and the various challenges that must be overcome to best exploit the multi-temporal images. Two DEMs were extracted from two stereo images pairs acquired 390 earth days apart in 2010-2011 using SOCET SET photogrammetry software, with a 1m post-spacing and a vertical accuracy of few tens of centimeters. Prior to comparison the DEMs registration, which was not precise enough out of SOCET-SET, was improved by wrapping the second DEM onto the first one using the bedrock only as a support for registration. The vertical registration residual was estimated at around 40cm RMSE and is mostly due to CCD misalignment and uncorrected spacecraft attitudes. Changes of elevation over time are usually determined from DEMs differentiation: provided that DEMs are perfectly registered and sampled on the same grid, this approach readily quantifies erosion and deposition processes. As the dunes have moved horizontally, they are not physically aligned anymore in the DEMs, and their morphologic evolution cannot be recovered easily from differentiating the DEMs. In this particular setting the topographic evolution is best recovered from correlation of the DEMs. We measure that the fastest dunes have migrated by

  10. Field Experiments using Telepresence and Virtual Reality to Control Remote Vehicles: Application to Mars Rover Missions

    NASA Technical Reports Server (NTRS)

    Stoker, Carol

    1994-01-01

    This paper will describe a series of field experiments to develop and demonstrate file use of Telepresence and Virtual Reality systems for controlling rover vehicles on planetary surfaces. In 1993, NASA Ames deployed a Telepresence-Controlled Remotely Operated underwater Vehicle (TROV) into an ice-covered sea environment in Antarctica. The goal of the mission was to perform scientific exploration of an unknown environment using a remote vehicle with telepresence and virtual reality as a user interface. The vehicle was operated both locally, from above a dive hole in the ice through which it was launched, and remotely over a satellite communications link from a control room at NASA's Ames Research center, for over two months. Remote control used a bidirectional Internet link to the vehicle control computer. The operator viewed live stereo video from the TROV along with a computer-gene rated graphic representation of the underwater terrain showing file vehicle state and other related information. Tile actual vehicle could be driven either from within the virtual environment or through a telepresence interface. In March 1994, a second field experiment was performed in which [lie remote control system developed for the Antarctic TROV mission was used to control the Russian Marsokhod Rover, an advanced planetary surface rover intended for launch in 1998. Marsokhod consists of a 6-wheel chassis and is capable of traversing several kilometers of terrain each day, The rover can be controlled remotely, but is also capable of performing autonomous traverses. The rover was outfitted with a manipulator arm capable of deploying a small instrument, collecting soil samples, etc. The Marsokhod rover was deployed at Amboy Crater in the Mojave desert, a Mars analog site, and controlled remotely from Los Angeles. in two operating modes: (1) a Mars rover mission simulation with long time delay and (2) a Lunar rover mission simulation with live action video. A team of planetary

  11. The nonrelativistic limit of (central-extended) Poincare group and some consequences for quantum actualization

    SciTech Connect

    Ardenghi, Juan S.; Castagnino, M.; Campoamor-Stursberg, R.

    2009-10-15

    The nonrelativistic limit of the centrally extended Poincare group is considered and their consequences in the modal Hamiltonian interpretation of quantum mechanics are discussed [O. Lombardi and M. Castagnino, Stud. Hist. Philos. Mod. Phys 39, 380 (2008); J. Phys, Conf. Ser. 128, 012014 (2008)]. Through the assumption that in quantum field theory the Casimir operators of the Poincare group actualize, the nonrelativistic limit of the latter group yields to the actualization of the Casimir operators of the Galilei group, which is in agreement with the actualization rule of previous versions of modal Hamiltonian interpretation [Ardenghi et al., Found. Phys. (submitted)].

  12. Magnetic logging: Detection of the earth's magnetic field reversals and application to borehole magnetostratigraphy

    SciTech Connect

    Bouisset, P.; Lalanne, B.; Augustin, A. ); Pages, G. )

    1991-03-01

    TOTAL CFP and CEA (the French Atomic Energy Commission) designed and developed two magnetic logging tools for precise and reliable in-situ magnetic measurements in the low magnetized sedimentary formations encountered when drilling for oil. The tools, measuring respectively the magnetic field and the magnetic susceptibility of the rocks, are operated as standard logging tools, and logs are recorded during standard logging operations. A proper combination of these magnetic respectively the magnetic field and the magnetic susceptibility of the rocks, are operated as standard logging tools, and logs are recorded during standard logging operations. A proper combination of these magnetic measurements leads to the determination, every meter, of natural remanent magnetization polarity, from which the direction of the Earth's magnetic field at the time of sedimentation is derived. A magnetostratigraphic sequence is obtained for each well and appears to be similar to the magnetostratigraphic reference scale. Application of this method to wells in the North Sea gives good results for correlations and absolute age determination, as well as facies diachronism. Further comparison of results obtained from magnetic measurements and from sequence stratigraphy applied to conventional logs shows that third-order sequence boundaries can be diachronous in wells 80 km apart. Although the potential of magnetic measurements is still under investigation, the first encouraging results clearly show that the new dating method presented in this paper can be very helpful in petroleum geology.

  13. A novel hybrid microrobot using rotational magnetic field for medical applications.

    PubMed

    Fu, Qiang; Guo, Shuxiang; Yamauchi, Yasuhiro; Hirata, Hideyuki; Ishihara, Hidenori

    2015-04-01

    Magnetically actuated microrobots for such tools have potential accomplish procedures in biological and medical applications. In this paper, a novel magnetically actuated hybrid microrobot with hybrid motion driven by an electromagnetic actuation system has been proposed. An o-ring type permanent magnet is embedded in the hybrid microrobot as an actuator driven by rotational magnetic field which is generated by a 3 axes Helmholtz coils. It is composed by two motion mechanisms. One is the spiral jet motion moved by rotating its body. The other one is fin motion moved by vibrating its body. Because only one permanent magnet is used inside the hybrid microrobot, two motions can be controlled separately without any interference. The hybrid microrobot can change its two motions to realize multi-DOFs movement and flexibility motion. The verified experiments are conducted in the pipe. The experimental results indicate that the moving speed can be controlled by adjusting the magnetic field changing frequency and the direction of motion can be controlled by changing the magnetic field direction. PMID:25681973

  14. Wide-field four-channel fluorescence imager for biological applications

    NASA Astrophysics Data System (ADS)

    Thakur, Madhuri; Melnik, Dmitry; Barnett, Heather; Daly, Kevin; Moran, Christine H.; Chang, Wei-Shun; Link, Stephan; Bucher, Christopher Theodore; Kittrell, Carter; Curl, Robert

    2010-03-01

    A wide-field four-channel fluorescence imager has been developed. The instrument uses four expanded laser beams to image a large section (6 mm×9 mm). An object can be sequentially illuminated with any combination of 408-, 532-, 658-, and 784-nm lasers for arbitrary (down to 1 ms) exposure times for each laser. Just two notch filters block scattered light from all four lasers. The design approach described here offers great flexibility in treatment of objects, very good sensitivity, and a wide field of view at low cost. There appears to be no commercial instrument capable of simultaneous fluorescence imaging of a wide field of view with four-laser excitation. Some possible applications are following events such as flow and mixing in microchannel systems, the transmission of biological signals across a culture, and following simulations of biological membrane diffusion. It can also be used in DNA sequencing by synthesis to follow the progress of the photolytic removal of dye and terminator. Without utilizing its time resolution, it can be used to obtain four independent images of a single tissue section stained with four targeting agents, with each coupled to a different dye matching one of the lasers.

  15. The applicability of current slimhole hydraulics algorithms under field conditions-a critical review

    SciTech Connect

    Thonhauser, G.; Millheim, K.K.; Spoerker, H.F.

    1995-12-31

    Numerous publications have addressed the problems inherent to calculating well hydraulics in slimhole applications. Accurate grasp of well hydraulics is of increased importance under slimhole conditions. Most models are valid in a controlled environment, but fail to fulfill the expectations under field conditions. Factors influencing the hydraulic behavior of the well have to be critically examined, and the accuracy of these factors entering into the calculations has to be quantified together with their relative impact on the results. This work has compared several {open_quotes}established{close_quotes} approaches with field data from five deep slimhole wells, and critically reviewed limitations and possible advances in slimhole hydraulics` calculations. Analyzing field data showed phenomena that are not considered in existing simulations. This work tries to define these phenomena and evaluate their impact on future simulations. These factors influencing pressure loss and ECD development are listed and quantified, and examples from well data are presented. A successful development of simulators of such complex systems is demanding a new way of thinking, away from the deterministic towards a probabilistic view of the problem.

  16. Field application of a genetically engineered microorganism for polycyclic aromatic hydrocarbon bioremediation process monitoring and control

    SciTech Connect

    Sayler, G.S.; Cox, C.D.; Ripp, S.; Nivens, D.E.; Werner, C.; Ahn, Y.; Matrubutham, U.; Burlage, R.

    1998-11-01

    On October 30, 1996, the US Environmental Protection Agency (EPA) commenced the first test release of genetically engineered microorganisms (GEMs) for use in bioremediation. The specific objectives of the investigation were multifaceted and include (1) testing the hypothesis that a GEM can be successfully introduced and maintained in a bioremediation process, (2) testing the concept of using, at the field scale, reporter organisms for direct bioremediation process monitoring and control, and (3) acquiring data that can be used in risk assessment decision making and protocol development for future field release applications of GEMs. The genetically engineered strain under investigation is Pseudomonas fluorescens strain HK44 (King et al., 1990). The original P. fluorescens parent strain was isolated from polycyclic aromatic hydrocarbon (PAH) contaminated manufactured gas plant soil. Thus, this bacterium is able to biodegrade naphthalene (as well as other substituted naphthalenes and other PAHs) and is able to function as a living bioluminescent reporter for the presence of naphthalene contamination, its bioavailability, and the functional process of biodegradation. A unique component of this field investigation was the availability of an array of large subsurface soil lysimeters. This article describes the experience associated with the release of a genetically modified microorganism, the lysimeter facility and its associated instrumentation, as well as representative data collected during the first eighteen months of operation.

  17. A novel hybrid microrobot using rotational magnetic field for medical applications.

    PubMed

    Fu, Qiang; Guo, Shuxiang; Yamauchi, Yasuhiro; Hirata, Hideyuki; Ishihara, Hidenori

    2015-04-01

    Magnetically actuated microrobots for such tools have potential accomplish procedures in biological and medical applications. In this paper, a novel magnetically actuated hybrid microrobot with hybrid motion driven by an electromagnetic actuation system has been proposed. An o-ring type permanent magnet is embedded in the hybrid microrobot as an actuator driven by rotational magnetic field which is generated by a 3 axes Helmholtz coils. It is composed by two motion mechanisms. One is the spiral jet motion moved by rotating its body. The other one is fin motion moved by vibrating its body. Because only one permanent magnet is used inside the hybrid microrobot, two motions can be controlled separately without any interference. The hybrid microrobot can change its two motions to realize multi-DOFs movement and flexibility motion. The verified experiments are conducted in the pipe. The experimental results indicate that the moving speed can be controlled by adjusting the magnetic field changing frequency and the direction of motion can be controlled by changing the magnetic field direction.

  18. Application of a force field algorithm for creating strongly correlated multiscale sphere packings

    NASA Astrophysics Data System (ADS)

    Zauner, Thomas

    2016-05-01

    This work presents a protocol driven force field algorithm, used to create multiscale correlated dense sphere packings. It was developed as part of a tool chain for the reconstruction of realistic multiscale porous rock samples. It overcomes limitations of Monte-Carlo or deposition based approaches, that are quite common in this field and were used previously. The new algorithm can create large, low porosity sphere packings with radius distributions covering two decades. Highly correlated structures that model pore clogging and sedimentation can be generated. To achieve this, an adequate force field and proper termination strategies are necessary. By changing the algorithm parameters in a controlled way during the simulation, a complex protocol driven process can be established. The implementation of the algorithm targets large parallel computer platforms to perform simulations with more than 10 million spheres. This article includes an application of the algorithm used to generate a highly polydisperse sphere packing with roughly 106 spheres and radii from 1 to 100 μm. The continuum description of this packing is discretized at resolutions from 0.25 to 1 μm and investigated using geometric and statistical characterizations and results from Lattice-Boltzmann flow simulations. These resolution dependent results affirm that reliable, predictive calculations for multiscale porous microstructures depend on the availability of large realistic continuum models. To obtain such models the algorithm presented herein can be used as a starting point.

  19. Association of manganese effluent with the application of fertilizer and manure on tea field.

    PubMed

    Ishibashi, Yuko; Matsuo, Hiroshi; Baba, Yoshiteru; Nagafuchi, Yoshitaka; Imato, Toshihiko; Hirata, Tatemasa

    2004-07-01

    Manganese (Mn) concentrations in the tea field effluent were 1.1-3.5 mg/l over a 2 year period from June 1997 to May 1998 (first water year) and June 1998 to May 1999 (second water year). The annual Mn loads were 38,000 g/ha in the first water year and 19,000 g/ha in the second. The highest Mn loads were observed, respectively, in July 1997 (10,000 g/ha) in the first water year and in June 1998 (4100 g/ha) in the second. The water-soluble Mn content of soil of the tea field increased abruptly with decreasing soil pH in the pH region below 4.5. The large Mn load from the tea field during the rainy season is likely due to application of excess fertilizer and manure before the rainy season, which may lead to acidification of the soil. PMID:15223275

  20. Field degradation of aminopyralid and clopyralid and microbial community response to application in Alaskan soils.

    PubMed

    Tomco, Patrick L; Duddleston, Khrystyne N; Schultz, Emily Jo; Hagedorn, Birgit; Stevenson, Timothy J; Seefeldt, Steven S

    2016-02-01

    High-latitude regions experience unique conditions that affect the degradation rate of agrochemicals in the environment. In the present study, data collected from 2 field sites in Alaska, USA (Palmer and Delta) were used to generate a kinetic model for aminopyralid and clopyralid degradation and to describe the microbial community response to herbicide exposure. Field plots were sprayed with herbicides and sampled over the summer of 2013. Quantification was performed via liquid chromatrography/tandem mass spectrometry, and microbial diversity was assessed via next-generation sequencing of bacterial 16S ribosomal ribonucleic acid (rRNA) genes. Both compounds degraded rapidly via pseudo-first-order degradation kinetics between 0 d and 28 d (t1/2  = 9.1-23.0 d), and then degradation slowed thereafter through 90 d. Aminopyralid concentration was 0.048 μg/g to 0.120 μg/g at 90 d post application, whereas clopyralid degraded rapidly at the Palmer site but was recovered in Delta soil at a concentraction of 0.046 μg/g. Microbial community diversity was moderately impacted by herbicide treatment, with the effect more pronounced at Delta. These data predict reductions in crop yield when sensitive plants (potatoes, tomatoes, marigolds, etc.) are rotated onto treated fields. Agricultural operations in high-latitude regions, both commercial and residential, rely heavily on cultivation of such crops and care must be taken when rotating.

  1. Applicability of models to predict phosphorus losses in drained fields: a review.

    PubMed

    Radcliffe, David E; Reid, D Keith; Blombäck, Karin; Bolster, Carl H; Collick, Amy S; Easton, Zachary M; Francesconi, Wendy; Fuka, Daniel R; Johnsson, Holger; King, Kevin; Larsbo, Mats; Youssef, Mohamed A; Mulkey, Alisha S; Nelson, Nathan O; Persson, Kristian; Ramirez-Avila, John J; Schmieder, Frank; Smith, Douglas R

    2015-03-01

    Most phosphorus (P) modeling studies of water quality have focused on surface runoff loses. However, a growing number of experimental studies have shown that P losses can occur in drainage water from artificially drained fields. In this review, we assess the applicability of nine models to predict this type of P loss. A model of P movement in artificially drained systems will likely need to account for the partitioning of water and P into runoff, macropore flow, and matrix flow. Within the soil profile, sorption and desorption of dissolved P and filtering of particulate P will be important. Eight models are reviewed (ADAPT, APEX, DRAINMOD, HSPF, HYDRUS, ICECREAMDB, PLEASE, and SWAT) along with P Indexes. Few of the models are designed to address P loss in drainage waters. Although the SWAT model has been used extensively for modeling P loss in runoff and includes tile drain flow, P losses are not simulated in tile drain flow. ADAPT, HSPF, and most P Indexes do not simulate flow to tiles or drains. DRAINMOD simulates drains but does not simulate P. The ICECREAMDB model from Sweden is an exception in that it is designed specifically for P losses in drainage water. This model seems to be a promising, parsimonious approach in simulating critical processes, but it needs to be tested. Field experiments using a nested, paired research design are needed to improve P models for artificially drained fields. Regardless of the model used, it is imperative that uncertainty in model predictions be assessed.

  2. Halbach arrays consisting of cubic elements optimised for high field gradients in magnetic drug targeting applications

    NASA Astrophysics Data System (ADS)

    Barnsley, Lester C.; Carugo, Dario; Owen, Joshua; Stride, Eleanor

    2015-11-01

    A key challenge in the development of magnetic drug targeting (MDT) as a clinically relevant technique is designing systems that can apply sufficient magnetic force to actuate magnetic drug carriers at useful tissue depths. In this study an optimisation routine was developed to generate designs of Halbach arrays consisting of multiple layers of high grade, cubic, permanent magnet elements, configured to deliver the maximum pull or push force at a position of interest between 5 and 50 mm from the array, resulting in arrays capable of delivering useful magnetic forces to depths past 20 mm. The optimisation routine utilises a numerical model of the magnetic field and force generated by an arbitrary configuration of magnetic elements. Simulated field and force profiles of optimised arrays were evaluated, also taking into account the forces required for assembling the array in practice. The resultant selection for the array, consisting of two layers, was then constructed and characterised to verify the simulations. Finally the array was utilised in a set of in vitro experiments to demonstrate its capacity to separate and retain microbubbles loaded with magnetic nanoparticles against a constant flow. The optimised designs are presented as light-weight, inexpensive options for applying high-gradient, external magnetic fields in MDT applications.

  3. Halbach arrays consisting of cubic elements optimised for high field gradients in magnetic drug targeting applications.

    PubMed

    Barnsley, Lester C; Carugo, Dario; Owen, Joshua; Stride, Eleanor

    2015-11-01

    A key challenge in the development of magnetic drug targeting (MDT) as a clinically relevant technique is designing systems that can apply sufficient magnetic force to actuate magnetic drug carriers at useful tissue depths. In this study an optimisation routine was developed to generate designs of Halbach arrays consisting of multiple layers of high grade, cubic, permanent magnet elements, configured to deliver the maximum pull or push force at a position of interest between 5 and 50 mm from the array, resulting in arrays capable of delivering useful magnetic forces to depths past 20 mm. The optimisation routine utilises a numerical model of the magnetic field and force generated by an arbitrary configuration of magnetic elements. Simulated field and force profiles of optimised arrays were evaluated, also taking into account the forces required for assembling the array in practice. The resultant selection for the array, consisting of two layers, was then constructed and characterised to verify the simulations. Finally the array was utilised in a set of in vitro experiments to demonstrate its capacity to separate and retain microbubbles loaded with magnetic nanoparticles against a constant flow. The optimised designs are presented as light-weight, inexpensive options for applying high-gradient, external magnetic fields in MDT applications. PMID:26458056

  4. Application of closed-form solutions to a mesh point field in silicon solar cells

    NASA Technical Reports Server (NTRS)

    Lamorte, M. F.

    1985-01-01

    A computer simulation method is discussed that provides for equivalent simulation accuracy, but that exhibits significantly lower CPU running time per bias point compared to other techniques. This new method is applied to a mesh point field as is customary in numerical integration (NI) techniques. The assumption of a linear approximation for the dependent variable, which is typically used in the finite difference and finite element NI methods, is not required. Instead, the set of device transport equations is applied to, and the closed-form solutions obtained for, each mesh point. The mesh point field is generated so that the coefficients in the set of transport equations exhibit small changes between adjacent mesh points. Application of this method to high-efficiency silicon solar cells is described; and the method by which Auger recombination, ambipolar considerations, built-in and induced electric fields, bandgap narrowing, carrier confinement, and carrier diffusivities are treated. Bandgap narrowing has been investigated using Fermi-Dirac statistics, and these results show that bandgap narrowing is more pronounced and that it is temperature-dependent in contrast to the results based on Boltzmann statistics.

  5. Compact optical gimbal as a conformal beam director for large field-of-regard lasercom applications

    NASA Astrophysics Data System (ADS)

    Kesner, Jessica E.; Hinrichs, Keith M.; Narkewich, Lawrence E.; Stephens, Timothy

    2015-03-01

    Laser communication offers advantages over traditional RF communication, including reduced size, weight, and power, higher data rates, and resistance to jamming. However, existing beam directors used for large field-of-regard lasercom terminals have limitations. Traditional gimbals require either domes or large conformal windows to achieve large fields of regard. Risley prism-based beam directors have temperature- and wavelength-dependent pointing necessitating tight temperature control and pointing correction techniques. Other methods, like liquid crystal optical phased array beam directors, have low transmittance and low technology readiness levels (TRLs). This paper presents a detailed design and preliminary performance results of a prototype Compact Optical Gimbal (COG) beam director that provides a 2 inch beam over a +/- 65o field-of-regard through a small (~12 inch) flat window. The COG differs from the traditional gimbal in that it includes three-axis steering with off-axis elevation and dither control, and a folded refractive afocal telescope incorporated into the body of the gimbal to minimize size. The COG's optical system does not have the pointing challenges characteristic of Risley prisms, and it utilizes high TRL components, including many commercial off-theshelf parts, to simplify implementation. The compact size and performance support a variety of beam steering applications and platforms.

  6. Halbach arrays consisting of cubic elements optimised for high field gradients in magnetic drug targeting applications.

    PubMed

    Barnsley, Lester C; Carugo, Dario; Owen, Joshua; Stride, Eleanor

    2015-11-01

    A key challenge in the development of magnetic drug targeting (MDT) as a clinically relevant technique is designing systems that can apply sufficient magnetic force to actuate magnetic drug carriers at useful tissue depths. In this study an optimisation routine was developed to generate designs of Halbach arrays consisting of multiple layers of high grade, cubic, permanent magnet elements, configured to deliver the maximum pull or push force at a position of interest between 5 and 50 mm from the array, resulting in arrays capable of delivering useful magnetic forces to depths past 20 mm. The optimisation routine utilises a numerical model of the magnetic field and force generated by an arbitrary configuration of magnetic elements. Simulated field and force profiles of optimised arrays were evaluated, also taking into account the forces required for assembling the array in practice. The resultant selection for the array, consisting of two layers, was then constructed and characterised to verify the simulations. Finally the array was utilised in a set of in vitro experiments to demonstrate its capacity to separate and retain microbubbles loaded with magnetic nanoparticles against a constant flow. The optimised designs are presented as light-weight, inexpensive options for applying high-gradient, external magnetic fields in MDT applications.

  7. Total and available phosphorus at the field scale after long-term manure application

    NASA Astrophysics Data System (ADS)

    Machado Siqueira, Glécio; da Silva Días, Rosane; Garcia Tomillo, Aitor; Vidal Vázquez, Eva

    2013-04-01

    Application of livestock manure to agricultural fields has been shown to increase crop growth and improve the soil capacity to hold water and nutrients. However, in agricultural areas with high cattle manure and/or slurry inputs over a period of several years, soil P can accumulate to levels in excess of crop needs. Phosphate overloading in soil has the potential to enrich surface runoff causing eutrophication of water bodies. The accelerated nutrient enrichment or eutrophication of surface water by runoff has become a significant environment problem in many developed countries. This is also the case in the Atlantic temperate humid region of Galicia, north-western of Spain. Various extraction methods are used to measure available P in soils. Differences in soil phosphorus (P) concentrations measured by various techniques may have implications for agronomic and environmental testing. The aims of this study were: 1) to compare available and total P concentrations measured by various methods and 2) to assess variability of excessive P accumulated on a field with a long-term history of manure application. Forty soil samples were taken at the 0-30 cm depth on a 6 ha field with mean slope of 2%, located in Castro de Ribeira de Lea, Lugo province, Spain. The study soil had hydromorphic features and was classified as a gleyic Cambisol. Available soil P was extracted by anion-exchange resin (AER) and by Mehlich 3 (M3). Moreover, two determination methods of P contents extracted by Mehlich 3, namely molybdic acid colorimetric standard procedure (M3-COL) and inductively coupled plasma emission spectroscopy or ICP-MS (M3-ICP) were compared. Total P was determined after extraction with nitric acid combined with microwave digestion, following the USEPA method 3051, and determined by ICP-MS. Mean values for AER-P, M3-COL-P, M3-ICP-P and total-P were 160.0, 397.6, 498.2 and 1080.9 mg kg-1, respectively. Therefore a marked accumulation of P in the top soil layer occurred following

  8. Caustic-Side Solvent Extraction: Prediction of Cesium Extraction for Actual Wastes and Actual Waste Simulants

    SciTech Connect

    Delmau, L.H.; Haverlock, T.J.; Sloop, F.V., Jr.; Moyer, B.A.

    2003-02-01

    This report presents the work that followed the CSSX model development completed in FY2002. The developed cesium and potassium extraction model was based on extraction data obtained from simple aqueous media. It was tested to ensure the validity of the prediction for the cesium extraction from actual waste. Compositions of the actual tank waste were obtained from the Savannah River Site personnel and were used to prepare defined simulants and to predict cesium distribution ratios using the model. It was therefore possible to compare the cesium distribution ratios obtained from the actual waste, the simulant, and the predicted values. It was determined that the predicted values agree with the measured values for the simulants. Predicted values also agreed, with three exceptions, with measured values for the tank wastes. Discrepancies were attributed in part to the uncertainty in the cation/anion balance in the actual waste composition, but likely more so to the uncertainty in the potassium concentration in the waste, given the demonstrated large competing effect of this metal on cesium extraction. It was demonstrated that the upper limit for the potassium concentration in the feed ought to not exceed 0.05 M in order to maintain suitable cesium distribution ratios.

  9. 27 MHz hybrid evanescent-mode applicators (HEMA) with flexible heating field for deep and safe subcutaneous hyperthermia.

    PubMed

    Franconi, C; Vrba, J; Montecchia, F

    1993-01-01

    A new class of low-frequency electromagnetic applicators for hyperthermic treatment of superficial and subcutaneous tissues is described. These applicators employ an air-filled waveguide segment which is operating below the cut-off frequency, the evanescent modes of which are energized by suitable exciters to produce model field components. Direct radiators are integrated into the waveguide to generate additional direct field components. All field components may be combined in different power level ratio, phase, and orientation, to provide a composite heating field exhibiting a large variety of field sizes, shapes, and penetration features. The composite field emerging from the waveguide aperture propagates within the tissue to be heated through a non-critical air-gap. These versatile heating devices appear of potential interest to heat a variety of deep and localized subcutaneous tissues to therapeutic temperatures without injury to access fat layers of substantial thickness.

  10. Will algorithms modified with soil and weather information improve in-field reflectance-sensing corn nitrogen applications?

    Technology Transfer Automated Retrieval System (TEKTRAN)

    Nitrogen (N) needs to support corn (Zea mays L.) production can be highly variable within fields. Canopy reflectance sensing for assessing crop N health has been implemented on many farmers’ fields to side-dress or top-dress variable-rate N application, but at times farmers report the performance of...

  11. Accuracy analysis and application of extrapolation of force-free fields in solar active and quiet regions

    NASA Astrophysics Data System (ADS)

    Liu, Suo; Zhang, Hongqi; Su, Jiangtao; Song, Mutao

    2013-07-01

    In this paper, the availability, applicability and deviation of nonlinear force-free (NLFF) fields extrapolated by Approximate Vertical Integration (AVI), Boundary Integral Equation (BIE) and Optimization (Opt.) methods are studied based on the comparison with two semi-analytical fields (Low & Lou 1990). These NLFF extrapolations based on the observational vector magnetograms are used to study the spatial magnetic field in the quiet Sun.

  12. Evaluation of volcano-style field ionization source and field emitting cathodes for mass spectrometry and applications

    NASA Technical Reports Server (NTRS)

    Buttrill, S. E., Jr.; Spindt, C. A.

    1978-01-01

    A volcano-style field ionization source was tested with eight different gases: hydrogen, helium, ammonia, methane, argon, neon, water vapor, and hydrogen sulfide. For ammonia, hydrogen sulfide, and water, the ionization efficiency of the field ionization source was determined as a function of the electrical potential difference between the ionizer and its counterelectrode. The ionization efficiencies for the other gases were too low to be measured in the present apparatus. The operating characteristics of a field emission cathode, were studied, in the presence of the same eight gases at pressures up to 0.00001 torr. The presence of the gases caused little or no significant change in the electron emission from the cathodes. Results indicate that the field emission cathode has advantages over electrically heated cathodes as a source of an electron beam in spacecraft mass spectrometers.

  13. Field Results from Application of the Outdoor-Air/Economizer Diagnostician for Commissioning and O&M

    SciTech Connect

    Pratt, Robert G.; Katipamula, Srinivas; Brambley, Michael R.; Blanc, Steven L.

    2000-05-31

    This paper presents results of field testing an automated diagnostician for outdoor-air-supply and economizer systems that can be used for commissioning purposes. The fundamental capabilities of the tool are described and key results of its application on six air handlers in a large hotel building are discussed. Ancillary issues pertinent to the development and application of such tools are also presented.

  14. 34 CFR 350.55 - What are the additional considerations for selecting Field-Initiated Project applications for...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ..., DEPARTMENT OF EDUCATION DISABILITY AND REHABILITATION RESEARCH PROJECTS AND CENTERS PROGRAM How Does the... Field-Initiated Project applications for funding? 350.55 Section 350.55 Education Regulations of the... Project applications for funding? (a) The Secretary reserves funds to support some or all of the...

  15. 30 CFR 203.64 - How many applications may I file on a field or a development project?

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Development and Expansion Projects § 203.64 How many applications may I file on a field or a development... development project or an expansion project designed to produce a reservoir or set of reservoirs. However, you...; (b) You apply for royalty relief for an expansion project; (c) You withdraw the application before...

  16. 30 CFR 203.64 - How many applications may I file on a field or a development project?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Sulfur General Royalty Relief for Pre-Act Deep Water Leases and for Development and Expansion Projects... application for royalty relief during the life of the field or for a development project or an expansion... for an expansion project; (c) You withdraw the application before we make a determination; or (d)...

  17. CHILDREN'S RESIDENTIAL EXPOSURE TO CHLORPYRIFOS: APPLICATION OF CPPAES FIELD MEASUREMENTS OF CHLORPYRIFOS AND TCPY WITHIN MENTOR/SHEDS PESTICIDES MODEL

    EPA Science Inventory

    The comprehensive individual field-measurements on non-dietary exposure collected in the Children's-Post-Pesticide-Application-Exposure-Study (CPPAES) were used within MENTOR/SHEDS-Pesticides, a physically based stochastic human exposure and dose model. In this application, howev...

  18. Integration of Remote Sensing derived Actual Evapotranspiration with Meteorological Data for Real Time Demand Forecasting in Semi-arid Regions

    NASA Astrophysics Data System (ADS)

    Ullah, M. K.; Hafeez, M. M.; Chemin, Y.; Faux, R.; Sixsmith, J.

    2010-12-01

    Irrigated agriculture is major consumer of fresh water, but a large part of the water devour for irrigation is wasted due to poor management of irrigation systems. Improving water management in irrigated areas require the analysis of real time water demand in order to determine the possibilities in which it may be modified and rationalised. Real time water demand information in irrigated areas is a key for planning about sustainable use of irrigation water. These activities are needed not only to improve water productivity, but also to increase the sustainability of irrigated agriculture by saving irrigation water. Demand forecasting entail the complete understanding of spatial and expected temporal variability of metrological parameters and evapotranspiration (ET). ET is the overriding aspect for irrigation demand forecasting at farm to catchment scale. Many models have been used to measure the ET rate, either empirical or functional. The major disadvantage of this approach is that most methods generate only point values, resulting in estimates that are not representative of large areas. These methods are based on crop factors under ideal conditions and cannot therefore represent actual crop ET. Satellite remote sensing is a powerful mean to estimate ET over various spatial and temporal scales. For improved irrigation system management and operation, a holistic approach of integrating remote sensing derived ET from SAM-ET (spatial algorithm for mapping ET) algorithm, for Australian agro-ecosystem, with forecasted meteorological data and field application loss functions for major crops were used to forecast actual water demand in Coleambally Irrigation Area (CIA), New South Wales, Australia. It covers approximately 79,000 ha of intensive irrigation and comprise of number of secondary and tertiary canals. In order to capture the spatial variability, CIA has been divided into 22 nodes based on direction of flow and connectivity. All hydrological data of inflow (i

  19. Photochemical Synthesis of Silver Nanodecahedrons and Related Nanostructures for Plasmonic Field Enhancement Applications

    NASA Astrophysics Data System (ADS)

    Lu, Haifei

    Noble-metal nanocrystals have received considerable attention in recent years for their size and shape dependent localized surface Plasmon resonances (LSPR). Various applications based on colloidal nanoparticles, such as surface enhanced Raman scattering (SERS), surface enhanced fluorescence (SEF), plasmonic sensing, photothermal therapy etc., have been broadly explored in the field of biomedicine, because of their extremely large optical scattering and absorption cross sections, as well as giant electric field enhancement on their surface. However, despite its high chemical stability, gold exhibits quite large losses and electric field enhancement is comparatively weaker than silver. Silver nanoparticles synthesized by the traditional technique only cover an LSPR ranged from 420~500 nm. On the other hand, the range of 500~660 nm, which is covered by several easily available commercial laser lines, very limited colloidal silver nanostructures with controllable size and shape have been reported, and realization of tuning the resonance to longer wavelengths is very important for the practical applications. In this thesis, a systematic study on photochemical synthesis of silver nanodecahedrons (NDs) and related nanostructures, and their plasmonic field enhancements are presented. First, the roles of chemicals and the light source during the formation of silver nanoparticles have been studied. We have also developed a preparation route for the production size-controlled silver nanodecahedrons (LSPR range 420 ~ 660 nm) in high purity. Indeed our experiments indicate that both the chemicals and the light sources can affect the shape and purity of final products. Adjusting the molar ratio between sodium citrate and silver nitrate can help to control the crystal structure following rapid reduction from sodium borohydride. Light from a blue LED (465 nm) can efficiently transform the polyvinylpyrrolidone stabilized small silver nanoparticles into silver NDs through photo

  20. Actual problems of research in food science.

    PubMed

    Schmandke, H

    1981-01-01

    Starting from the necessary trend towards development in the field of food production, the author outlines, on the basis of current knowledge, the problems to be solved in food science. A general research conception is deduced for the essential nutrient "protein" (as an example) which is illustrated by results from studies on protein fibre and protein gel formation.

  1. Isolating the actual signal of paleointensity?

    NASA Astrophysics Data System (ADS)

    Valet, J. M.; Moreno, E.; Bassinot, F.; Herrero-Bervera, E.

    2011-12-01

    Signals of relative and absolute paleointensity suffer inaccuracies and contaminations that must be considered to improve our knowledge of the field variations. Climatically related changes in rock magnetic parameters are frequently suspected of influencing the signal of relative paleointensity extrated from marine sediments. High resolution measurements of climatic and magnetic parameters have been performed on two cores from the eastern China Sea and the western Caroline Basin. On both cores, magnetic parameters show a strong imprint of climatic changes but the absence of relationship between the inclination and the bulk density indicates that the directional changes do not depend on lithology. All normalization parameters yielded similar estimates of relative paleointensity (RPI), but we have noticed the persistence of climatic components in the signal. Principal Component Analysis (PCA) applied to different parameters related to climate, lithology and paleointensity has allowed to extract a "clean" magnetic signal that we refer as "principal component of paleointensity (PCP)" which is in better agreement with the Sint-2000 composite curve and provides a reliable record of relative paleointensity. The presence of climatic frequencies in RPIs most likely reflects the influence of lithology on the response of magnetization to field intensity. We suggest that PCA analysis can be very useful to approach these problems. Not only can the calculation separate overlapping climatic and magnetic signals, but it indicates what confidence should be given to the data. Incidentally, the present results emphasize the importance of carrying out detailed paleoclimatic analyses along with paleointensity studies. Many approaches have been proposed during the past 20 years for experiments of absolute paleointensity in order to reduce the duration of the experiments and increase the number of field determinations. However, this is frequently obtained to the detriment of the accuracy

  2. Improved strong-field approximation and quantum-orbit theory: Application to ionization by a bicircular laser field

    NASA Astrophysics Data System (ADS)

    Milošević, D. B.; Becker, W.

    2016-06-01

    A theory of above-threshold ionization of atoms by a strong laser field is formulated. Two versions of the strong-field approximation (SFA) are considered, the direct SFA and the improved SFA, which do not and do, respectively, take into account rescattering of the freed electron off the parent ion. The atomic bound state is included in two different ways: as an expansion in terms of Slater-type orbitals or as an asymptotic wave function. Even though we are using the single-active-electron approximation, multielectron effects are taken into account in two ways: by a proper choice of the ground state and by an adequate definition of the ionization rate. For the case of the asymptotic bound-state wave functions, using the saddle-point method, a simple expression for the T -matrix element is derived for both the direct and the improved SFA. The theory is applied to ionization by a bicircular field, which consists of two coplanar counterrotating circularly polarized components with frequencies that are integer multiples of a fundamental frequency ω . Special emphasis is on the ω -2 ω case. In this case, the threefold rotational symmetry of the field carries over to the velocity map of the liberated electrons, for both the direct and the improved SFA. The results obtained are analyzed in detail using the quantum-orbit formalism, which gives good physical insight into the above-threshold ionization process. For this purpose, a specific classification of the saddle-point solutions is introduced for both the backward-scattered and the forward-scattered electrons. The high-energy backward-scattering quantum orbits are similar to those discovered for high-order harmonic generation. The short forward-scattering quantum orbits for a bicircular field are similar to those of a linearly polarized field. The conclusion is that these orbits are universal, i.e., they do not depend much on the shape of the laser field.

  3. Optical, electrical, and magnetic field studies of organic materials for light emitting diodes and photovoltaic applications

    NASA Astrophysics Data System (ADS)

    Basel, Tek Prasad

    We studied optical, electrical, and magnetic field responses of films and devices based on organic semiconductors that are used for organic light emitting diodes (OLEDs) and photovoltaic (OPV) solar cell applications. Our studies show that the hyperfine interaction (HFI)-mediated spin mixing is the key process underlying various magnetic field effects (MFE) and spin transport in aluminum tris(8-hydroxyquinoline)[Alq3]-based OLEDs and organic spin-valve (OSV). Conductivity-detected magnetic resonance in OLEDs and magneto-resistance (MR) in OSVs show substantial isotope dependence. In contrast, isotope-insensitive behavior in the magneto-conductance (MC) of same devices is explained by the collision of spin ½ carriers with triplet polaron pairs. We used steady state optical spectroscopy for studying the energy transfer dynamics in films and OLEDs based on host-guest blends of the fluorescent polymer and phosphorescent molecule. We have also studied the magnetic-field controlled color manipulation in these devices, which provide a strong proof for the `polaron-pair' mechanism underlying the MFE in organic devices. The critical issue that hampers organic spintronics device applications is significant magneto-electroluminescence (MEL) at room temperature (RT). Whereas inorganic spin valves (ISVs) show RT magneto-resistance, MR>80%, however, the devices do not exhibit electroluminescence (EL). In contrast, OLEDs show substantive EL emission, and are particularly attractive because of their flexibility, low cost, and potential for multicolor display. We report a conceptual novel hybrid organic/inorganic spintronics device (h-OLED), where we employ both ISV with large MR at RT, and OLED that has efficient EL emission. We investigated the charge transfer process in an OPV solar cell through optical, electrical, and magnetic field measurements of thin films and devices based on a low bandgap polymer, PTB7 (fluorinated poly-thienothiophene-benzodithiophene). We found that

  4. Consequences of Predicted or Actual Asteroid Impacts

    NASA Astrophysics Data System (ADS)

    Chapman, C. R.

    2003-12-01

    Earth impact by an asteroid could have enormous physical and environmental consequences. Impactors larger than 2 km diameter could be so destructive as to threaten civilization. Since such events greatly exceed any other natural or man-made catastrophe, much extrapolation is necessary just to understand environmental implications (e.g. sudden global cooling, tsunami magnitude, toxic effects). Responses of vital elements of the ecosystem (e.g. agriculture) and of human society to such an impact are conjectural. For instance, response to the Blackout of 2003 was restrained, but response to 9/11 terrorism was arguably exaggerated and dysfunctional; would society be fragile or robust in the face of global catastrophe? Even small impacts, or predictions of impacts (accurate or faulty), could generate disproportionate responses, especially if news media reports are hyped or inaccurate or if responsible entities (e.g. military organizations in regions of conflict) are inadequately aware of the phenomenology of small impacts. Asteroid impact is the one geophysical hazard of high potential consequence with which we, fortunately, have essentially no historical experience. It is thus important that decision makers familiarize themselves with the hazard and that society (perhaps using a formal procedure, like a National Academy of Sciences study) evaluate the priority of addressing the hazard by (a) further telescopic searches for dangerous but still-undiscovered asteroids and (b) development of mitigation strategies (including deflection of an oncoming asteroid and on- Earth civil defense). I exemplify these issues by discussing several representative cases that span the range of parameters. Many of the specific physical consequences of impact involve effects like those of other geophysical disasters (flood, fire, earthquake, etc.), but the psychological and sociological aspects of predicted and actual impacts are distinctive. Standard economic cost/benefit analyses may not

  5. Enhanced oil recovery using water as a driving fluid. Part 7. Field applications of carbon dioxide flooding

    SciTech Connect

    Mungan, N.

    1981-09-01

    Spurred by Windfall Profit Tax incentives and the availability of less costly CO/sub 2/ from natural deposits, there now is increased interest and activities in the field application of CO/sub 2/ flooding in the US. Interest is focused on miscible CO/sub 2/ flooding, but it should be recognized that even without miscibility, the swelling and viscosity reduction of crude oil can significantly contribute to incremental oil recovery. Thus, CO/sub 2/ flooding may apply to the recovery of heavy oils and could serve as an alternative process to steam and hydrocarbon solvent processes in some instances. This study deals with how to identify a suitable reservoir, studies required to support a field application, guidelines for pilot testing, operational problems that may arise in the field, and a brief review of field applications to date.

  6. "Actually, All of Us Are Scapegoats"

    ERIC Educational Resources Information Center

    Yang, Li

    2007-01-01

    The author presents an interview he conducted with Liu Wen (an alias), a teacher suspected of having participated in a scam at Haozhou Normal Junior College, located in the northern part of Anhui province. The dialog centered around the purchase of theses during applications for professional titles. All of the teachers at Haozhou who bought theses…

  7. A recursive field-normalized bibliometric performance indicator: an application to the field of library and information science.

    PubMed

    Waltman, Ludo; Yan, Erjia; van Eck, Nees Jan

    2011-10-01

    Two commonly used ideas in the development of citation-based research performance indicators are the idea of normalizing citation counts based on a field classification scheme and the idea of recursive citation weighing (like in PageRank-inspired indicators). We combine these two ideas in a single indicator, referred to as the recursive mean normalized citation score indicator, and we study the validity of this indicator. Our empirical analysis shows that the proposed indicator is highly sensitive to the field classification scheme that is used. The indicator also has a strong tendency to reinforce biases caused by the classification scheme. Based on these observations, we advise against the use of indicators in which the idea of normalization based on a field classification scheme and the idea of recursive citation weighing are combined.

  8. Sensitivity Enhancement of Separated Local Field Experiments: Application to Membrane Proteins

    PubMed Central

    Gopinath, T.; Verardi, Raffaello; Traaseth, Nathaniel J.; Veglia, Gianluigi

    2010-01-01

    Separated local field (SLF) experiments have been used for almost three decades to obtain structural information in solid-state NMR. These experiments resolve chemical shift anisotropy (CSA) from dipole-dipole interactions (dipolar couplings, DC) in isolated spin systems. Both CSA and DC data can be converted into orientational constraints to elucidate the secondary structure and topology of membrane proteins in oriented lipid bilayers. Here, we propose a new suite of sensitivity enhanced SLF pulse sequences to measure CSA and DC for aligned membrane proteins and liquid crystalline molecules that will decrease the time needed for data acquisition. We demonstrate the efficacy of these new sensitivity enhanced experiments using both a single crystal of N-acetyl leucine and a single pass membrane protein sarcolipin reconstituted in aligned lipid bicelles. These results lay the groundwork for the routine application of these methods for studying the structure and topology of membrane proteins. PMID:20349983

  9. Digital Signal Processing by Virtual Instrumentation of a MEMS Magnetic Field Sensor for Biomedical Applications

    PubMed Central

    Juárez-Aguirre, Raúl; Domínguez-Nicolás, Saúl M.; Manjarrez, Elías; Tapia, Jesús A.; Figueras, Eduard; Vázquez-Leal, Héctor; Aguilera-Cortés, Luz A.; Herrera-May, Agustín L.

    2013-01-01

    We present a signal processing system with virtual instrumentation of a MEMS sensor to detect magnetic flux density for biomedical applications. This system consists of a magnetic field sensor, electronic components implemented on a printed circuit board (PCB), a data acquisition (DAQ) card, and a virtual instrument. It allows the development of a semi-portable prototype with the capacity to filter small electromagnetic interference signals through digital signal processing. The virtual instrument includes an algorithm to implement different configurations of infinite impulse response (IIR) filters. The PCB contains a precision instrumentation amplifier, a demodulator, a low-pass filter (LPF) and a buffer with operational amplifier. The proposed prototype is used for real-time non-invasive monitoring of magnetic flux density in the thoracic cage of rats. The response of the rat respiratory magnetogram displays a similar behavior as the rat electromyogram (EMG). PMID:24196434

  10. Symbiotic Activity of Pea (Pisum sativum) after Application of Nod Factors under Field Conditions

    PubMed Central

    Siczek, Anna; Lipiec, Jerzy; Wielbo, Jerzy; Kidaj, Dominika; Szarlip, Paweł

    2014-01-01

    Growth and symbiotic activity of legumes are mediated by Nod factors (LCO, lipo-chitooligosaccharides). To assess the effects of application of Nod factors on symbiotic activity and yield of pea, a two-year field experiment was conducted on a Haplic Luvisol developed from loess. Nod factors were isolated from Rhizobium leguminosarum bv. viciae strain GR09. Pea seeds were treated with the Nod factors (10−11 M) or water (control) before planting. Symbiotic activity was evaluated by measurements of nitrogenase activity (acetylene reduction assay), nodule number and mass, and top growth by shoot mass, leaf area, and seed and protein yield. Nod factors generally improved pea yield and nitrogenase activity in the relatively dry growing season 2012, but not in the wet growing season in 2013 due to different weather conditions. PMID:24786094

  11. [The application of stereology in radiology imaging and cell biology fields].

    PubMed

    Hu, Na; Wang, Yan; Feng, Yuanming; Lin, Wang

    2012-08-01

    Stereology is an interdisciplinary method for 3D morphological study developed from mathematics and morphology. It is widely used in medical image analysis and cell biology studies. Because of its unbiased, simple, fast, reliable and non-invasive characteristics, stereology has been widely used in biomedical areas for quantitative analysis and statistics, such as histology, pathology and medical imaging. Because the stereological parameters show distinct differences in different pathology, many scholars use stereological methods to do quantitative analysis in their studies in recent years, for example, in the areas of the condition of cancer cells, tumor grade, disease development and the patient's prognosis, etc. This paper describes the stereological concept and estimation methods, also illustrates the applications of stereology in the fields of CT images, MRI images and cell biology, and finally reflects the universality, the superiority and reliability of stereology. PMID:23016438

  12. [The QR code in society, economy and medicine--fields of application, options and chances].

    PubMed

    Flaig, Benno; Parzeller, Markus

    2011-01-01

    2D codes like the QR Code ("Quick Response") are becoming more and more common in society and medicine. The application spectrum and benefits in medicine and other fields are described. 2D codes can be created free of charge on any computer with internet access without any previous knowledge. The codes can be easily used in publications, presentations, on business cards and posters. Editors choose between contact details, text or a hyperlink as information behind the code. At expert conferences, linkage by QR Code allows the audience to download presentations and posters quickly. The documents obtained can then be saved, printed, processed etc. Fast access to stored data in the internet makes it possible to integrate additional and explanatory multilingual videos into medical posters. In this context, a combination of different technologies (printed handout, QR Code and screen) may be reasonable.

  13. Field testing and applications of the Ultrasonic Ranging and Data (USRAD) System

    SciTech Connect

    Dickerson, K.S.; Pickering, D.A.; Blair, M.S.; Espegren, M.L.; Nyquist, J.E.

    1989-01-01

    The Ultrasonic Ranging and Data (USRAD) System is a patented, computerized data acquisition system developed to relate the radiological surveyor's precise physical location to instantaneous radiation data taken during walk-on surveys. The USRAD System incorporates three technologies: radio frequency communications, ultrasonics, and microcomputers. Initial field testing of the USRAD System has resulted in several improvements to walk-on radiological surveys including real-time position data, reproducible survey results, on-site verification of survey coverage, on-site data reduction and graphics, and permanent data storage on magnetic media. Although the USRAD System was developed specifically for use with a gamma-ray detector, it is adaptable to other instruments. Applications of the USRAD System may include verification of remediated and uncontaminated areas, emergency response in mapping pollutant locations after accidents, and characterization of hazardous waste areas. 2 refs., 8 figs.

  14. Modeling and simulation of carbon nanotube field effect transistor and its circuit application

    NASA Astrophysics Data System (ADS)

    Singh, Amandeep; Saini, Dinesh Kumar; Agarwal, Dinesh; Aggarwal, Sajal; Khosla, Mamta; Raj, Balwinder

    2016-07-01

    The carbon nanotube field effect transistor (CNTFET) is modelled for circuit application. The model is based on the transport mechanism and it directly relates the transport mechanism with the chirality. Also, it does not consider self consistent equations and thus is used to develop the HSPICE compatible circuit model. For validation of the model, it is applied to the top gate CNTFET structure and the MATLAB simulation results are compared with the simulations of a similar structure created in NanoTCAD ViDES. For demonstrating the circuit compatibility of the model, two circuits viz. inverter and SRAM are designed and simulated in HSPICE. Finally, SRAM performance metrics are compared with those of device simulations from Nano TCAD ViDES.

  15. Engineering a material for biomedical applications with electric field assisted processing

    NASA Astrophysics Data System (ADS)

    Ahmad, Z.; Nangrejo, M.; Edirisinghe, M.; Stride, E.; Colombo, P.; Zhang, H. B.

    2009-10-01

    In this work, using multiple co-flows we demonstrate in-situ encapsulation of nano-particles, liquids and/or gases in different structural morphologies, which can also be deposited in a designated pattern by a direct write method and surface modification can be controlled to release encapsulated material. The range of possibilities offered by exposing a material solution to an applied electric field can result in a plethora of structures which can accommodate a whole host of biomedical applications from microfluidic devices (microchannels, loaded with various materials), printed 3D structures and patterns, lab-on-a-chip devices to encapsulated materials (capsules, tubes, fibres, dense multi-layered fibrous networks) for drug delivery and tissue engineering. The structures obtained in this way can vary in size from micrometer to the nanometer range and the processing is viable for all states of matter. The work shown demonstrates some novel structures and methodologies for processing a biomaterial.

  16. Gas Geothermometry Based on CO Content--Application in Italian Geothermal Fields

    SciTech Connect

    D'Amore, F.; Fancelli, R.; Saracco, L.; Truesdell, A.H.

    1987-01-20

    This paper discusses gas chemical equilibria in geothermal reservoirs involving the species CO{sub 2}, CH{sub 4}, CO, H{sub 2}S, H{sub 2}, and H{sub 2}O. A set of equations is developed correlating ratios of gas to CO{sub 2} with temperature, steam fraction, and CO{sub 2} partial pressure in the reservoir. A method for solving the set of nonlinear equations is proposed. These equations do not involve discharge gas/total H{sub 2}O ratios and may therefore be used for fumaroles and hot-spring fluids. Applications to fumarole and well-discharge fluid compositions in Italian geothermal fields show good correlations between temperatures calculated with this method and the temperatures measured in the reservoir (between 140° to 330°C). 5 tabs., 1 fig., 19 refs.

  17. A semi-automated, field-portable microscopy platform for clinical diagnostic applications

    NASA Astrophysics Data System (ADS)

    Jagannadh, Veerendra Kalyan; Srinivasan, Rajesh; Gorthi, Sai Siva

    2015-08-01

    Clinical microscopy is a versatile diagnostic platform used for diagnosis of a multitude of diseases. In the recent past, many microfluidics based point-of-care diagnostic devices have been developed, which serve as alternatives to microscopy. However, these point-of-care devices are not as multi-functional and versatile as clinical microscopy. With the use of custom designed optics and microfluidics, we have developed a versatile microscopy-based cellular diagnostic platform, which can be used at the point of care. The microscopy platform presented here is capable of detecting infections of very low parasitemia level (in a very small quantity of sample), without the use of any additional computational hardware. Such a cost-effective and portable diagnostic device, would greatly impact the quality of health care available to people living in rural locations of the world. Apart from clinical diagnostics, it's applicability to field research in environmental microbiology has also been outlined.

  18. Impact of an external radiation field on handheld XRF measurements for nuclear forensics applications

    SciTech Connect

    Steeb, Jennifer L.; Mertz, Carol J.; Finck, Martha R.; Engelstad, Gary; Carney, Kevin P.; Chamberlain, David B.

    2015-03-28

    X-ray fluorescence (XRF) is an attractive technique for nuclear forensics applications. We evaluated a handheld, portable XRF device by applying an external radiation field (10 mR/h to 17 R/h) using two types of radiography sources: a 60Co radiography camera to observe effects from high-energy gamma emissions and an 192Ir radiography camera to observe effects from several low-energy gamma (0.604, 0.468, and 0.317 MeV) and decay daughter x-ray emissions. External radiation tests proved that radiation, in general, has a significant effect on the dead time or background at dose rates over 1 R/hr for both the 192Ir and 60Co sources.

  19. Application of a weak magnetic field to improve microbial fuel cell performance.

    PubMed

    Tong, Zhong-Hua; Yu, Han-Qing; Li, Wen-Wei; Wang, Yun-Kun; Sun, Min; Liu, Xian-Wei; Sheng, Guo-Ping

    2015-12-01

    Microbial fuel cells (MFCs) have emerged as a promising technology for wastewater treatment with concomitant energy production but the performance is usually limited by low microbial activities. This has spurred intensive research interest for microbial enhancement. This study demonstrated an interesting stimulation effect of a static magnetic field (MF) on sludge-inoculated MFCs and explored into the mechanisms. The implementation of a 100-mT MF accelerated the reactor startup and led to increased electricity generation. Under the MF exposure, the activation loss of the MFC was decreased, but there was no increased secretion of redox mediators. Thus, the MF effect was mainly due to enhanced bioelectrochemical activities of anodic microorganisms, which are likely attributed to the oxidative stress and magnetohydrodynamic effects under an MF exposure. This work implies that weak MF may be applied as a simple and effective approach to stimulate microbial activities for various bioelectrochemical energy production and decontamination applications.

  20. Digital signal processing by virtual instrumentation of a MEMS magnetic field sensor for biomedical applications.

    PubMed

    Juárez-Aguirre, Raúl; Domínguez-Nicolás, Saúl M; Manjarrez, Elías; Tapia, Jesús A; Figueras, Eduard; Vázquez-Leal, Héctor; Aguilera-Cortés, Luz A; Herrera-May, Agustín L

    2013-11-05

    We present a signal processing system with virtual instrumentation of a MEMS sensor to detect magnetic flux density for biomedical applications. This system consists of a magnetic field sensor, electronic components implemented on a printed circuit board (PCB), a data acquisition (DAQ) card, and a virtual instrument. It allows the development of a semi-portable prototype with the capacity to filter small electromagnetic interference signals through digital signal processing. The virtual instrument includes an algorithm to implement different configurations of infinite impulse response (IIR) filters. The PCB contains a precision instrumentation amplifier, a demodulator, a low-pass filter (LPF) and a buffer with operational amplifier. The proposed prototype is used for real-time non-invasive monitoring of magnetic flux density in the thoracic cage of rats. The response of the rat respiratory magnetogram displays a similar behavior as the rat electromyogram (EMG).

  1. Visualization of complex flow fields, with application to the interpretation of colour flow Doppler images.

    PubMed

    Vera, N; Steinman, D A; Ethier, C R; Johnston, K W; Cobbold, R S

    1992-01-01

    The interpretation of colour flow Doppler images in regions of complex flow can be difficult. To aid in such interpretations, we have developed software which accepts as input the results of a fluid flow simulation program and produces simulated colour flow Doppler images on a workstation. This allows direct comparison between well-described flow fields and colour flow Doppler images. Application of this approach is demonstrated for flow in a two-dimensional model of a distal graft-to-vessel anastomosis, and the interpretation of the results for three-dimensional flows is briefly discussed. In addition, a method for presenting two-dimensional (vectorial) velocity data via colour coding is presented.

  2. Actual and desired computer literacy among allied health students.

    PubMed

    Agho, A O; Williams, A M

    1995-01-01

    The purpose of this study was to examine the level of computer literacy among allied health students, with specific focus on physical therapy, occupational therapy, and respiratory therapy students, and to investigate the perceived differences between actual computer literacy and desired computer literacy. Two established measurement instruments were used to collect data from a sample of 377 allied health students. T-tests and Pearson product-moment correlations were conducted to analyze the data. Results show that allied health students take very few computer courses, but they are generally aware of the applications of computers in the practice of allied health and they desire a higher level of computer literacy than they currently have.

  3. Dynamic effects and applications for nanosecond pulsed electric fields in cells and tissues

    NASA Astrophysics Data System (ADS)

    Beebe, Stephen J.; Blackmore, Peter F.; Hall, Emily; White, Jody A.; Willis, Lauren K.; Fauntleroy, Laura; Kolb, Juergen F.; Schoenbach, Karl H.

    2005-04-01

    Nanosecond, high intensity pulsed electric fields [nsPEFs] that are below the plasma membrane [PM] charging time constant have decreasing effects on the PM and increasing effects on intracellular structures and functions as the pulse duration decreases. When human cell suspensions were exposed to nsPEFs where the electric fields were sufficiently intense [10-300ns, <=300 kV/cm.], apoptosis signaling pathways could be activated in several cell models. Multiple apoptosis markers were observed in Jurkat, HL-60, 3T3L1-preadipocytes, and isolated rat adipocytes including decreased cell size and number, caspase activation, DNA fragmentation, and/or cytochrome c release into the cytoplasm. Phosphatidylserine externalization was observed as a biological response to nsPEFs in 3T3-L1 preadipocytes and p53-wildtype and -null human colon carcinoma cells. B10.2 mouse fibrosarcoma tumors that were exposed to nsPEFs ex vivo and in vivo exhibited DNA fragmentation, elevated caspase activity, and reduced size and weight compared to contralateral sham-treated control tumors. When nsPEF conditions were below thresholds for apoptosis and classical PM electroporation, non-apoptotic responses were observed similar to those initiated through PM purinergic receptors in HL-60 cells and thrombin in human platelets. These included Ca2+ mobilization from intracellular stores [endoplasmic reticulum] and subsequently through store-operated Ca2+ channels in the PM. In addition, platelet activation measured as aggregation responses were observed in human platelets. Finally, when nsPEF conditions followed classical electroporation-mediated transfection, the expression intensity and number of GFP-expressing cells were enhanced above cells exposed to electroporation conditions alone. These studies demonstrate that application of nsPEFs to cells or tissues can modulate cell-signaling mechanisms with possible applications as a new basic science tool, cancer treatment, wound healing, and gene therapy.

  4. Cell death induced by the application of alternating magnetic fields to nanoparticle-loaded dendritic cells

    NASA Astrophysics Data System (ADS)

    Marcos-Campos, I.; Asín, L.; Torres, T. E.; Marquina, C.; Tres, A.; Ibarra, M. R.; Goya, G. F.

    2011-05-01

    In this work, the capability of primary, monocyte-derived dendritic cells (DCs) to uptake iron oxide magnetic nanoparticles (MNPs) is assessed and a strategy to induce selective cell death in these MNP-loaded DCs using external alternating magnetic fields (AMFs) is reported. No significant decrease in the cell viability of MNP-loaded DCs, compared to the control samples, was observed after five days of culture. The number of MNPs incorporated into the cytoplasm was measured by magnetometry, which confirmed that 1-5 pg of the particles were uploaded per cell. The intracellular distribution of these MNPs, assessed by transmission electron microscopy, was found to be primarily inside the endosomic structures. These cells were then subjected to an AMF for 30 min and the viability of the blank DCs (i.e. without MNPs), which were used as control samples, remained essentially unaffected. However, a remarkable decrease of viability from approximately 90% to 2-5% of DCs previously loaded with MNPs was observed after the same 30 min exposure to an AMF. The same results were obtained using MNPs having either positive (NH2 + ) or negative (COOH - ) surface functional groups. In spite of the massive cell death induced by application of AMF to MNP-loaded DCs, the number of incorporated magnetic particles did not raise the temperature of the cell culture. Clear morphological changes at the cell structure after magnetic field application were observed using scanning electron microscopy. Therefore, local damage produced by the MNPs could be the main mechanism for the selective cell death of MNP-loaded DCs under an AMF. Based on the ability of these cells to evade the reticuloendothelial system, these complexes combined with an AMF should be considered as a potentially powerful tool for tumour therapy.

  5. Design, Fabrication, and Characterization of Carbon Nanotube Field Emission Devices for Advanced Applications

    NASA Astrophysics Data System (ADS)

    Radauscher, Erich Justin

    Carbon nanotubes (CNTs) have recently emerged as promising candidates for electron field emission (FE) cathodes in integrated FE devices. These nanostructured carbon materials possess exceptional properties and their synthesis can be thoroughly controlled. Their integration into advanced electronic devices, including not only FE cathodes, but sensors, energy storage devices, and circuit components, has seen rapid growth in recent years. The results of the studies presented here demonstrate that the CNT field emitter is an excellent candidate for next generation vacuum microelectronics and related electron emission devices in several advanced applications. The work presented in this study addresses determining factors that currently confine the performance and application of CNT-FE devices. Characterization studies and improvements to the FE properties of CNTs, along with Micro-Electro-Mechanical Systems (MEMS) design and fabrication, were utilized in achieving these goals. Important performance limiting parameters, including emitter lifetime and failure from poor substrate adhesion, are examined. The compatibility and integration of CNT emitters with the governing MEMS substrate (i.e., polycrystalline silicon), and its impact on these performance limiting parameters, are reported. CNT growth mechanisms and kinetics were investigated and compared to silicon (100) to improve the design of CNT emitter integrated MEMS based electronic devices, specifically in vacuum microelectronic device (VMD) applications. Improved growth allowed for design and development of novel cold-cathode FE devices utilizing CNT field emitters. A chemical ionization (CI) source based on a CNT-FE electron source was developed and evaluated in a commercial desktop mass spectrometer for explosives trace detection. This work demonstrated the first reported use of a CNT-based ion source capable of collecting CI mass spectra. The CNT-FE source demonstrated low power requirements, pulsing

  6. Near-field effects in Green's function retrieval from cross-correlation of elastic fields: experimental study with application to elastography.

    PubMed

    Benech, N; Brum, J; Catheline, S; Gallot, T; Negreira, C

    2013-05-01

    In a lossless system, the causal and acausal Green's function for elastic waves can be retrieved by cross-correlating the elastic field at two positions. This field, composed of converging and diverging waves, is interpreted in the frame of a time-reversal process. In this work, the near-field effects on the spatio-temporal focusing of elastic waves are analyzed through the elastodynamic Green's function. Contrary to the scalar field case, the spatial focusing is not symmetric preserving the directivity pattern of a simple source. One important feature of the spatial asymmetry is its dependency on the Poisson ratio of the solid. Additionally, it is shown that the retrieval of the bulk wave speed values is affected by diffraction. The correction factor depends on the relative direction between the source and the observed field. Experimental verification of the analysis is carried out on the volume of a soft-solid. A low-frequency diffuse-like field is generated by random impacts at the sample's free surface. The displacement field is imaged using ultrasound by a standard speckle tracking technique. One important application of this work is in the estimation of the shear elastic modulus in soft biological tissues, whose quantification can be useful in non-invasive diagnosis of various diseases. PMID:23654383

  7. Application of a diffusion model to simulate erosion of scoria cones in the San Francisco volcanic field, Arizona

    SciTech Connect

    Hooper, D.M.; Sheridan, M.F. )

    1992-01-01

    A computer model for simulating the erosion of scoria (cinder) cones by diffusive processes is being formulated to investigate their long-term degradation. The model uses a two-dimensional diffusion algorithm expressed in finite-difference form to operate upon a three-dimensional scoria cone input as a matrix of elevation values (essentially a DTM). The computer simulation exhibits degradation from an initial conical form, through crater infilling, and finally into a low-relief, shield-like hill. This preliminary and simplest version of the model successfully mimicked the degradation pattern observed in degraded cones of the San Francisco volcanic field, Arizona. The scoria cones in this volcanic field range in age from Early Pliocene to Holocene and demonstrate a decrease in cone height/width ratio and slope with an increase in age. Morphometric relationships offer an opportunity to establish a relative age scheme and to loosely date cones of unknown age in a given volcanic field. The systematic decrease with time of scoria cone height, height/width ratio, and slope is the basis for a relative dating scheme. Morphometry is derived from 1:24,000-scale, 20-ft.-contour topographic maps and from calibrated field photographs. Morphometric parameters obtained from computer simulations and from actual degraded cones are calibrated by a least-squares technique with cones that have been dated by radiometric or other absolute age-dating methods. Comparative morphology of scoria cones is a potentially useful age-dating tool for mapping volcanic fields.

  8. An empirical law for wavelet maxima interpretation of potential fields: Application to the Uinta Mountains range

    NASA Astrophysics Data System (ADS)

    Cavalier, Paul; Baghai-Wadji, Alireza; Poprawski, Yohann; Inggs, Michael

    2016-11-01

    Wavelet methods have been used in potential fields study to estimate source properties such as depth or structural index, through the analysis of Wavelet Transform Modulus Maxima Lines (WTMML) intersections and slopes at high scales. Little has been done on the study of maximum points of the wavelet diagram, that we call here Maximum Wavelet Coefficient Scales (MWCS). Previous works have shown interesting correlations between MWCS and source depths, depending on the wavelet used in regards to the source nature and the data derivative order. In this paper, we introduce an empirical law involving spectral parameters that have not been studied so far, which allows analytical calculation of the MWCS, knowing the source characteristics and using certain wavelets. In return, the study of MWCS allows recovering source characteristics from the use of a single wavelet, without prior knowledge on the source. We demonstrate through synthetic models that the new capability of predicting the source type and depth according to the wavelet coefficient behaviour allows new ways of potential fields' sources characterization and identification. We show an application of the formula on a real case example in the Uinta Mountains (Utah, USA).

  9. Design and application of a field sensing system for ground anchors in slopes.

    PubMed

    Choi, Se Woon; Lee, Jihoon; Kim, Jong Moon; Park, Hyo Seon

    2013-01-01

    In a ground anchor system, cables or tendons connected to a bearing plate are used for stabilization of slopes. Then, the stability of a slope is dependent on maintaining the tension levels in the cables. So far, no research on a strain-based field sensing system for ground anchors has been reported. Therefore, in this study, a practical monitoring system for long-term sensing of tension levels in tendons for anchor-reinforced slopes is proposed. The system for anchor-reinforced slopes is composed of: (1) load cells based on vibrating wire strain gauges (VWSGs), (2) wireless sensor nodes which receive and process the signals from load cells and then transmit the result to a master node through local area communication, (3) master nodes which transmit the data sent from sensor nodes to the server through mobile communication, and (4) a server located at the base station. The system was applied to field sensing of ground anchors in the 62 m-long and 26 m-high slope at the side of the highway. Based on the long-term monitoring, the safety of the anchor-reinforced slope can be secured by the timely applications of re-tensioning processes in tendons. PMID:23507820

  10. Typical Application of Sound Field in Wastewater Treatment with Fluidized Bed Photocatalytic Reactor.

    PubMed

    Si, Chong-dian; Zhou, Jing; Gao, Hong-tao; Liu, Guang-jun; Wu, Jian-jun

    2015-04-01

    The effect of a sound field on wastewater treatment with a fluidized bed photocatalytic reactor (FBPR) was investigated. With Alizarin Green (AG) being the sole infectant, the Fe-doped TiO2 catalyst prepared was used as the fluidized media. According to the Langmuir-Hinshelwood model, the photocatalytic degradation follows the pseudo-first-order reaction kinetics with respect to the concentration of AG. Sound field application allowed the fluidization of the fine powder at high liquid flow rates; thus, the mass transfer rate between organic pollutant and particle photocatalyst was enhanced and the efficiency of degradation was increased. As expected, the degradation rate constant increased with increasing sound pressure level, as well as increased with increasing sound frequency ranging from 50 to 100 Hz, then further decreased with increasing sound frequency from 100 to 200 Hz. In addition, Fe doping is also responsible for the enhanced photocurrent response of the Fe-doped TiO2 nanoparticle in FBPR relative to pure TiO2. PMID:26462082

  11. Field portable low temperature porous layer open tubular cryoadsorption headspace sampling and analysis part II: Applications.

    PubMed

    Harries, Megan; Bukovsky-Reyes, Santiago; Bruno, Thomas J

    2016-01-15

    This paper details the sampling methods used with the field portable porous layer open tubular cryoadsorption (PLOT-cryo) approach, described in Part I of this two-part series, applied to several analytes of interest. We conducted tests with coumarin and 2,4,6-trinitrotoluene (two solutes that were used in initial development of PLOT-cryo technology), naphthalene, aviation turbine kerosene, and diesel fuel, on a variety of matrices and test beds. We demonstrated that these analytes can be easily detected and reliably identified using the portable unit for analyte collection. By leveraging efficiency-boosting temperature control and the high flow rate multiple capillary wafer, very short collection times (as low as 3s) yielded accurate detection. For diesel fuel spiked on glass beads, we determined a method detection limit below 1 ppm. We observed greater variability among separate samples analyzed with the portable unit than previously documented in work using the laboratory-based PLOT-cryo technology. We identify three likely sources that may help explain the additional variation: the use of a compressed air source to generate suction, matrix geometry, and variability in the local vapor concentration around the sampling probe as solute depletion occurs both locally around the probe and in the test bed as a whole. This field-portable adaptation of the PLOT-cryo approach has numerous and diverse potential applications.

  12. Application of electrical submersible pumps in heavy crude oil in Boscan Field

    SciTech Connect

    Bortolin, L.L.

    1995-12-31

    During recent years optimization of artificial lift methods has been applied in the oil industry, in order to evaluate the effect on oil well production and to establish a company`s optimal investment policies. Higher costs on new artificial lifting equipment and facilities for new fields have created the necessity to review the latest available technology of different lifting methods and specially that related to electrical submersible pumps (ESP). Few studies in the area of heavy crude oil production optimization using ESP as a lifting method have been published. This paper discusses the results of an ESP pilot project performed in 24 wells in Boscan field, and analyzes the performance of the equipment and its application range. The ESP equipment was installed in completions at depths ranging from 7000 to 9000 feet, with a 10{degrees}API gravity crude and bottomhole temperature of 180{degrees}F. It was concluded that despite a reduction of the pump`s efficiency, the ESP equipment does qualify as a good alternative lifting method for heavy oil production. It is also possible to obtain higher production rates. The results obtained in this pilot project, confirm that submersible pumps are an alternative method for lifting heavy crude oil from relatively deep reservoirs.

  13. Alkali-vapor cell with metal coated windows for efficient application of an electric field

    NASA Astrophysics Data System (ADS)

    Sarkisyan, D.; Sarkisyan, A. S.; Guéna, J.; Lintz, M.; Bouchiat, M.-A.

    2005-05-01

    We describe the implementation of a cylindrical T-shaped alkali-vapor cell for laser spectroscopy in the presence of a longitudinal electric field. The two windows are used as two electrodes of the high-voltage assembly, which is made possible by a metallic coating which entirely covers the inner and outer sides of the windows except for a central area to let the laser beams in and out of the cell. This allows very efficient application of the electric field, up to 2kV/cm in a rather dense superheated vapor, even when significant photoemission takes place at the windows during pulsed laser irradiation. The body of the cell is made of sapphire or alumina ceramic to prevent large currents resulting from surface conduction observed in cesiated glass cells. The technique used to attach the monocrystalline sapphire windows to the cell body causes minimal stress birefringence in the windows. In addition, reflection losses at the windows can be made very small. The vapor cell operates with no buffer gas and has no magnetic part. The use of this kind of cell has resulted in an improvement of the signal-to-noise ratio in the measurement of parity violation in cesium vapor underway at ENS, Paris. The technique can be applied to other situations where a brazed assembly would give rise to unacceptably large birefringence in the windows.

  14. Design and Application of Hybrid Magnetic Field-Eddy Current Probe

    NASA Technical Reports Server (NTRS)

    Wincheski, Buzz; Wallace, Terryl; Newman, Andy; Leser, Paul; Simpson, John

    2013-01-01

    The incorporation of magnetic field sensors into eddy current probes can result in novel probe designs with unique performance characteristics. One such example is a recently developed electromagnetic probe consisting of a two-channel magnetoresistive sensor with an embedded single-strand eddy current inducer. Magnetic flux leakage maps of ferrous materials are generated from the DC sensor response while high-resolution eddy current imaging is simultaneously performed at frequencies up to 5 megahertz. In this work the design and optimization of this probe will be presented, along with an application toward analysis of sensory materials with embedded ferromagnetic shape-memory alloy (FSMA) particles. The sensory material is designed to produce a paramagnetic to ferromagnetic transition in the FSMA particles under strain. Mapping of the stray magnetic field and eddy current response of the sample with the hybrid probe can thereby image locations in the structure which have experienced an overstrain condition. Numerical modeling of the probe response is performed with good agreement with experimental results.

  15. Estimating parameters of aquifer heterogeneity using pumping tests - implications for field applications

    NASA Astrophysics Data System (ADS)

    Zech, Alraune; Arnold, Sven; Schneider, Christoph; Attinger, Sabine

    2015-09-01

    The knowledge of subsurface heterogeneity is a prerequisite to describe flow and transport in porous media. Of particular interest are the variance and the correlation scale of hydraulic conductivity. In this study, we present how these aquifer parameters can be inferred using empirical steady state pumping test data. We refer to a previously developed analytical solution of "effective well flow" and examine its applicability to pumping test data as under field conditions. It is examined how the accuracy and confidence of parameter estimates of variance and correlation length depend on the number and location of head measurements. Simulations of steady state pumping tests in a confined virtual aquifer are used to systematically reduce sampling size while determining the rating of the estimates at each level of data density. The method was then applied to estimate the statistical parameters of a fluvial heterogeneous aquifer at the test site Horkheimer Insel, Germany. We conclude that the "effective well flow" solution is a simple alternative to laboratory investigations to estimate the statistical heterogeneity parameter using steady state pumping tests. However, the accuracy and uncertainty of the estimates depend on the design of the field study. In this regard, our results can help to improve the conceptual design of pumping tests with regard to the parameter of interest.

  16. Design and application of hybrid magnetic field-eddy current probe

    NASA Astrophysics Data System (ADS)

    Wincheski, Buzz; Wallace, Terryl; Newman, Andy; Leser, Paul; Simpson, John

    2014-02-01

    The incorporation of magnetic field sensors into eddy current probes can result in novel probe designs with unique performance characteristics. One such example is a recently developed electromagnetic probe consisting of a twochannel magnetoresistive sensor with an embedded single-strand eddy current inducer. Magnetic flux leakage maps of ferrous materials are generated from the DC sensor response while high-resolution eddy current imaging is simultaneously performed at frequencies up to 5 MHz. In this work the design and optimization of this probe will be presented, along with an application toward analysis of sensory materials with embedded ferromagnetic shape-memory alloy (FSMA) particles. The sensory material is designed to produce a paramagnetic to ferromagnetic transition in the FSMA particles under strain. Mapping of the stray magnetic field and eddy current response of the sample with the hybrid probe can thereby image locations in the structure which have experienced an overstrain condition. Numerical modeling of the probe response is performed with good agreement with experimental results.

  17. Applications of matched field processing to damage detection in composite wind turbine blades

    NASA Astrophysics Data System (ADS)

    Tippmann, Jeffery D.; Lanza di Scalea, Francesco

    2015-03-01

    There are many structures serving vital infrastructure, energy, and national security purposes. Inspecting the components and areas of the structure most prone to failure during maintenance operations by using non- destructive evaluation methods has been essential in avoiding costly, but preventable, catastrophic failures. In many cases, the inspections are performed by introducing acoustic, ultrasonic, or even thermographic waves into the structure and then evaluating the response. Sometimes the structure, or a component, is not accessible for active inspection methods. Because of this, there is a growing interest to use passive methods, such as using ambient noise, or sources of opportunity, to produce a passive impulse response function similar to the active approach. Several matched field processing techniques most notably used in oceanography and seismology applications are examined in more detail. While sparse array imaging in structures has been studied for years, all methods studied previously have used an active interrogation approach. Here, structural damage detection is studied by use of the reconstructed impulse response functions in ambient noise within sparse array imaging techniques, such as matched-field processing. This has been studied in experiments on a 9-m wind turbine blade.

  18. Application methods of infrared thermal images in the health care field of traditional Chinese medicine

    NASA Astrophysics Data System (ADS)

    Li, Ziru; Zhang, Xusheng

    2008-12-01

    Infrared thermal imaging (ITI) is the potential imaging technique for the health care field of traditional Chinese medicine (TCM). Successful application demands obeying the characteristics and regularity of the ITI of human body and designing rigorous trials. First, the influence of time must be taken into account as the ITI of human body varies with time markedly. Second, relative magnitude is preferred to be the index of the image features. Third, scatter diagrams and the method of least square could present important information for evaluating the health care effect. A double-blind placebo-controlled randomized trial was undertaken to study the influences of Shengsheng capsule, one of the TCM health food with immunity adjustment function, on the ITI of human body. The results showed that the effect of Shengsheng capsule to people with weak constitution or in the period of being weak could be reflected objectively by ITI. The relative efficacy rate was 81.3% for the trial group and 30.0% for the control group, there was significant difference between the two groups (P=0.003). So the sensitivity and objectivity of ITI are of great importance to the health care field of TCM.

  19. Field application of innovative grouting agents for in situ stabilization of buried waste sites

    SciTech Connect

    Loomis, G.G.; Farnsworth, R.K.

    1997-12-31

    This paper presents field applications for two innovative grouting agents that were used to in situ stabilize buried waste sites, via jet grouting. The two grouting agents include paraffin and a proprietary iron oxide based cement grout called TECT. These materials were tested in specially designed cold test pits that simulate buried transuranic waste at the Idaho National Engineering Laboratory (INEL). The field demonstrations were performed at the INEL in an area referred to as the Cold Test Pit, which is adjacent to the INEL Radioactive Waste Management Complex (RWMC). At the RWMC, 56,000 m{sup 3} of transuranic (TRU) waste is co-mingled with over 170,000 m{sup 3} of soil in shallow land burial. Improving the confinement of this waste is one of the options for final disposition of this waste. Using jet-grouting technology to inject these materials into the pore spaces of buried waste sites results in the creation of buried monolithic waste forms that simultaneously protect the waste from subsidence, while eliminating the migratory potential of hazardous and radioactive contaminants in the waste.

  20. Field test results of the physical solvent N-Formyl morpholine for gas treating applications

    SciTech Connect

    Palla, N.; Lee, A.L.

    1997-12-31

    The Institute of Gas Technology (IGT) is developing gas processing technology that will reduce gas processing costs for current production and allow subquality gas to be economically produced that would have been otherwise, not produced. The experimental program has primarily focused on the evaluation of N-Formyl Morpholine (NFM) as a physical solvent for the cost-effective upgrading of subquality natural gas to pipeline quality. The selection of NFM for this program was based on previous work conducted by IGT in the selective removal of hydrogen sulfide, and carbon dioxide from coal gasifier effluents. That work showed that the use of NFM resulted in a significant cost advantage over 107 other solvents for that application. The project approach for the development of NFM process has been divided into following main categories: obtain vapor-liquid equilibrium, physical properties and additional published literature data; obtain mass-transfer coefficients using 2 inch absorber/stripper apparatus and calculate equation of state parameters and binary interaction parameters using VLE data; develop a gas processing model using Aspen Plus simulation program and evaluate economic advantages of the NFM process compared to commercial physical solvent; and design a pilot plant skid mounted field test unit and conduct field test experiments.

  1. Application of self-consistent field theory to self-assembled bilayer membranes

    NASA Astrophysics Data System (ADS)

    Zhang, Ping-Wen; Shi, An-Chang

    2015-12-01

    Bilayer membranes self-assembled from amphiphilic molecules such as lipids, surfactants, and block copolymers are ubiquitous in biological and physiochemical systems. The shape and structure of bilayer membranes depend crucially on their mechanical properties such as surface tension, bending moduli, and line tension. Understanding how the molecular properties of the amphiphiles determine the structure and mechanics of the self-assembled bilayers requires a molecularly detailed theoretical framework. The self-consistent field theory provides such a theoretical framework, which is capable of accurately predicting the mechanical parameters of self-assembled bilayer membranes. In this mini review we summarize the formulation of the self-consistent field theory, as exemplified by a model system composed of flexible amphiphilic chains dissolved in hydrophilic polymeric solvents, and its application to the study of self-assembled bilayer membranes. Project supported by the National Natural Science Foundation of China (Grant Nos. 11421101 and 21274005) and the Natural Sciences and Engineering Research Council (NSERC) of Canada.

  2. Temporary changes in populations of soil organisms after field application of entomopathogenic nematodes.

    PubMed

    Chevalier, R; Webster, J M

    2006-12-01

    To assess the effect of an inundative release of entomopathogenic nematodes on soil organisms, population densities of soil-dwelling organisms were monitored before and after an application of an aqueous suspension of Heterorhabditis megidis to field plots in mown grassland (Exp. I) at a level of 0.38 million/m(2) and to plots (Exp. II) situated in a forested area, a grass sports field and an orchard at a level of 1.5 million/m(2). At the forested site, heat-killed H. megidis (1.5 million/m(2)) also were applied to two plots to compare the impact on soil organisms of a large introduction of living and dead nematodes. Post-treatment, temporary changes in natural population densities of several nematode genera and other organisms were detected in H. megidis-treated plots in both experiments. Temporary changes in the nematode trophic structure occurred in the percentages of nematode omnivores, herbivores and predators in both experiments. Evidence from all sites suggests that the changes were temporary and that the presence of decaying H. megidis following treatment contributed to nutrient enrichment of the soil and to direct and indirect effects on the nematode community.

  3. Field portable low temperature porous layer open tubular cryoadsorption headspace sampling and analysis part II: Applications.

    PubMed

    Harries, Megan; Bukovsky-Reyes, Santiago; Bruno, Thomas J

    2016-01-15

    This paper details the sampling methods used with the field portable porous layer open tubular cryoadsorption (PLOT-cryo) approach, described in Part I of this two-part series, applied to several analytes of interest. We conducted tests with coumarin and 2,4,6-trinitrotoluene (two solutes that were used in initial development of PLOT-cryo technology), naphthalene, aviation turbine kerosene, and diesel fuel, on a variety of matrices and test beds. We demonstrated that these analytes can be easily detected and reliably identified using the portable unit for analyte collection. By leveraging efficiency-boosting temperature control and the high flow rate multiple capillary wafer, very short collection times (as low as 3s) yielded accurate detection. For diesel fuel spiked on glass beads, we determined a method detection limit below 1 ppm. We observed greater variability among separate samples analyzed with the portable unit than previously documented in work using the laboratory-based PLOT-cryo technology. We identify three likely sources that may help explain the additional variation: the use of a compressed air source to generate suction, matrix geometry, and variability in the local vapor concentration around the sampling probe as solute depletion occurs both locally around the probe and in the test bed as a whole. This field-portable adaptation of the PLOT-cryo approach has numerous and diverse potential applications. PMID:26726934

  4. Design and Application of a Field Sensing System for Ground Anchors in Slopes

    PubMed Central

    Choi, Se Woon; Lee, Jihoon; Kim, Jong Moon; Park, Hyo Seon

    2013-01-01

    In a ground anchor system, cables or tendons connected to a bearing plate are used for stabilization of slopes. Then, the stability of a slope is dependent on maintaining the tension levels in the cables. So far, no research on a strain-based field sensing system for ground anchors has been reported. Therefore, in this study, a practical monitoring system for long-term sensing of tension levels in tendons for anchor-reinforced slopes is proposed. The system for anchor-reinforced slopes is composed of: (1) load cells based on vibrating wire strain gauges (VWSGs), (2) wireless sensor nodes which receive and process the signals from load cells and then transmit the result to a master node through local area communication, (3) master nodes which transmit the data sent from sensor nodes to the server through mobile communication, and (4) a server located at the base station. The system was applied to field sensing of ground anchors in the 62 m-long and 26 m-high slope at the side of the highway. Based on the long-term monitoring, the safety of the anchor-reinforced slope can be secured by the timely applications of re-tensioning processes in tendons. PMID:23507820

  5. Typical Application of Sound Field in Wastewater Treatment with Fluidized Bed Photocatalytic Reactor.

    PubMed

    Si, Chong-dian; Zhou, Jing; Gao, Hong-tao; Liu, Guang-jun; Wu, Jian-jun

    2015-04-01

    The effect of a sound field on wastewater treatment with a fluidized bed photocatalytic reactor (FBPR) was investigated. With Alizarin Green (AG) being the sole infectant, the Fe-doped TiO2 catalyst prepared was used as the fluidized media. According to the Langmuir-Hinshelwood model, the photocatalytic degradation follows the pseudo-first-order reaction kinetics with respect to the concentration of AG. Sound field application allowed the fluidization of the fine powder at high liquid flow rates; thus, the mass transfer rate between organic pollutant and particle photocatalyst was enhanced and the efficiency of degradation was increased. As expected, the degradation rate constant increased with increasing sound pressure level, as well as increased with increasing sound frequency ranging from 50 to 100 Hz, then further decreased with increasing sound frequency from 100 to 200 Hz. In addition, Fe doping is also responsible for the enhanced photocurrent response of the Fe-doped TiO2 nanoparticle in FBPR relative to pure TiO2.

  6. Towards the geometric optimization of potential field models - A new spatial operator tool and applications

    NASA Astrophysics Data System (ADS)

    Haase, Claudia; Götze, Hans-Jürgen

    2014-05-01

    We present a new method for automated geometric modifications of potential field models. Computational developments and the increasing amount of available potential field data, especially gradient data from the satellite missions, lead to increasingly complex models and integrated modelling tools. Editing of these models becomes more difficult. Our approach presents an optimization tool that is designed to modify vertex-based model geometries (e.g. polygons, polyhedrons, triangulated surfaces) by applying spatial operators to the model that use an adaptive, on-the-fly model discretization. These operators deform the existing model via vertex-dragging, aiming at a minimized misfit between measured and modelled potential field anomaly. The parameters that define the operators are subject to an optimization process. This kind of parametrization provides a means for the reduction of unknowns (dimensionality of the search space), allows a variety of possible modifications and ensures that geometries are not destroyed by crossing polygon lines or punctured planes. We implemented a particle swarm optimization as a global searcher with restart option for the task of finding optimal operator parameters. This approach provides us with an ensemble of model solutions that allows a selection and geologically reasonable interpretations. The applicability of the tool is demonstrated in two 2D case studies that provide models of different extent and with different objectives. The first model is a synthetic salt structure in a horizontally layered background model. Expected geometry modifications are considerably small and localized and the initial models contain rather little information on the intended salt structure. A large scale example is given in the second study. Here, the optimization is applied to a sedimentary basin model that is based on seismic interpretation. With the aim to evaluate the seismically derived model, large scale operators are applied that mainly cause

  7. Data Mining and NIR Spectroscopy in Viticulture: Applications for Plant Phenotyping under Field Conditions †

    PubMed Central

    Gutiérrez, Salvador; Tardaguila, Javier; Fernández-Novales, Juan; Diago, Maria P.

    2016-01-01

    Plant phenotyping is a very important topic in agriculture. In this context, data mining strategies may be applied to agricultural data retrieved with new non-invasive devices, with the aim of yielding useful, reliable and objective information. This work presents some applications of machine learning algorithms along with in-field acquired NIR spectral data for plant phenotyping in viticulture, specifically for grapevine variety discrimination and assessment of plant water status. Support vector machine (SVM), rotation forests and M5 trees models were built using NIR spectra acquired in the field directly on the adaxial side of grapevine leaves, with a non-invasive portable spectrophotometer working in the spectral range between 1600 and 2400 nm. The ν-SVM algorithm was used for the training of a model for varietal classification. The classifiers’ performance for the 10 varieties reached, for cross- and external validations, the 88.7% and 92.5% marks, respectively. For water stress assessment, the models developed using the absorbance spectra of six varieties yielded the same determination coefficient for both cross- and external validations (R2 = 0.84; RMSEs of 0.164 and 0.165 MPa, respectively). Furthermore, a variety-specific model trained only with samples of Tempranillo from two different vintages yielded R2 = 0.76 and RMSE of 0.16 MPa for cross-validation and R2 = 0.79, RMSE of 0.17 MPa for external validation. These results show the power of the combined use of data mining and non-invasive NIR sensing for in-field grapevine phenotyping and their usefulness for the wine industry and precision viticulture implementations. PMID:26891304

  8. Application of cylindrical near-field acoustical holography to the visualization of aeroacoustic sources.

    PubMed

    Lee, Moohyung; Bolton, J Stuart; Mongeau, Luc

    2003-08-01

    The purpose of this study was to develop methods for visualizing the sound radiation from aeroacoustic sources in order to identify their source strength distribution, radiation patterns, and to quantify the performance of noise control solutions. Here, cylindrical Near-field Acoustical Holography was used for that purpose. In a practical holographic measurement of sources comprising either partially correlated or uncorrelated subsources, it is necessary to use a number of reference microphones so that the sound field on the hologram surface can be decomposed into mutually incoherent partial fields before holographic projection. In this article, procedures are described for determining the number of reference microphones required when visualizing partially correlated aeroacoustic sources; performing source nonstationarity compensation; and applying regularization. The procedures have been demonstrated by application to a ducted fan. Holographic tests were performed to visualize the sound radiation from that source in its original form. The system was then altered to investigate the effect of two modifications on the fan's sound radiation pattern: first, leaks were created in the fan and duct assembly, and second, sound absorbing material was used to line the downstream duct section. Results in all three cases are shown at the blade passing frequency and for a broadband noise component. In the absence of leakage, both components were found to exhibit a dipole-like radiation pattern. Leakage was found to have a strong influence on the directivity of the blade passing tone. The increase of the flow resistance caused by adding the acoustical lining resulted in a nearly symmetric reduction of sound radiation. PMID:12942967

  9. Application of cylindrical near-field acoustical holography to the visualization of aeroacoustic sources

    NASA Astrophysics Data System (ADS)

    Lee, Moohyung; Bolton, J. Stuart; Mongeau, Luc

    2003-08-01

    The purpose of this study was to develop methods for visualizing the sound radiation from aeroacoustic sources in order to identify their source strength distribution, radiation patterns, and to quantify the performance of noise control solutions. Here, cylindrical Near-field Acoustical Holography was used for that purpose. In a practical holographic measurement of sources comprising either partially correlated or uncorrelated subsources, it is necessary to use a number of reference microphones so that the sound field on the hologram surface can be decomposed into mutually incoherent partial fields before holographic projection. In this article, procedures are described for determining the number of reference microphones required when visualizing partially correlated aeroacoustic sources; performing source nonstationarity compensation; and applying regularization. The procedures have been demonstrated by application to a ducted fan. Holographic tests were performed to visualize the sound radiation from that source in its original form. The system was then altered to investigate the effect of two modifications on the fan's sound radiation pattern: first, leaks were created in the fan and duct assembly, and second, sound absorbing material was used to line the downstream duct section. Results in all three cases are shown at the blade passing frequency and for a broadband noise component. In the absence of leakage, both components were found to exhibit a dipole-like radiation pattern. Leakage was found to have a strong influence on the directivity of the blade passing tone. The increase of the flow resistance caused by adding the acoustical lining resulted in a nearly symmetric reduction of sound radiation.

  10. Optimization of inertial sensor-based motion capturing for magnetically distorted field applications.

    PubMed

    Schiefer, Christoph; Ellegast, Rolf P; Hermanns, Ingo; Kraus, Thomas; Ochsmann, Elke; Larue, Christian; Plamondon, André

    2014-12-01

    Inertial measurement units (IMU) are gaining increasing importance for human motion tracking in a large variety of applications. IMUs consist of gyroscopes, accelerometers, and magnetometers which provide angular rate, acceleration, and magnetic field information, respectively. In scenarios with a permanently distorted magnetic field, orientation estimation algorithms revert to using only angular rate and acceleration information. The result is an increasing drift error of the heading information. This article describes a method to compensate the orientation drift of IMUs using angular rate and acceleration readings in a quaternion-based algorithm. Zero points (ZP) were introduced, which provide additional heading and gyroscope bias information and were combined with bidirectional orientation computation. The necessary frequency of ZPs to achieve an acceptable error level is derived in this article. In a laboratory environment the method and the effect of varying interval length between ZPs was evaluated. Eight subjects were equipped with seven IMUs at trunk, head and upper extremities. They performed a predefined course of box handling for 40 min at different motion speeds and ranges of motion. The orientation estimation was compared to an optical motion tracking system. The resulting mean root mean squared error (RMSE) of all measurements ranged from 1.7 deg to 7.6 deg (roll and pitch) and from 3.5 deg to 15.0 deg (heading) depending on the measured segment, at a mean interval-length of 1.1 min between two ZPs without magnetometer usage. The 95% limits of agreement (LOA) ranged in best case from -2.9 deg to 3.6 deg at the hip roll angle and in worst case from -19.3 deg to 18.9 deg at the forearm heading angle. This study demonstrates that combining ZPs and bidirectional computation can reduce orientation error of IMUs in environments with magnetic field distortion.

  11. Optimization of inertial sensor-based motion capturing for magnetically distorted field applications.

    PubMed

    Schiefer, Christoph; Ellegast, Rolf P; Hermanns, Ingo; Kraus, Thomas; Ochsmann, Elke; Larue, Christian; Plamondon, André

    2014-12-01

    Inertial measurement units (IMU) are gaining increasing importance for human motion tracking in a large variety of applications. IMUs consist of gyroscopes, accelerometers, and magnetometers which provide angular rate, acceleration, and magnetic field information, respectively. In scenarios with a permanently distorted magnetic field, orientation estimation algorithms revert to using only angular rate and acceleration information. The result is an increasing drift error of the heading information. This article describes a method to compensate the orientation drift of IMUs using angular rate and acceleration readings in a quaternion-based algorithm. Zero points (ZP) were introduced, which provide additional heading and gyroscope bias information and were combined with bidirectional orientation computation. The necessary frequency of ZPs to achieve an acceptable error level is derived in this article. In a laboratory environment the method and the effect of varying interval length between ZPs was evaluated. Eight subjects were equipped with seven IMUs at trunk, head and upper extremities. They performed a predefined course of box handling for 40 min at different motion speeds and ranges of motion. The orientation estimation was compared to an optical motion tracking system. The resulting mean root mean squared error (RMSE) of all measurements ranged from 1.7 deg to 7.6 deg (roll and pitch) and from 3.5 deg to 15.0 deg (heading) depending on the measured segment, at a mean interval-length of 1.1 min between two ZPs without magnetometer usage. The 95% limits of agreement (LOA) ranged in best case from -2.9 deg to 3.6 deg at the hip roll angle and in worst case from -19.3 deg to 18.9 deg at the forearm heading angle. This study demonstrates that combining ZPs and bidirectional computation can reduce orientation error of IMUs in environments with magnetic field distortion. PMID:25321344

  12. Data Mining and NIR Spectroscopy in Viticulture: Applications for Plant Phenotyping under Field Conditions.

    PubMed

    Gutiérrez, Salvador; Tardaguila, Javier; Fernández-Novales, Juan; Diago, Maria P

    2016-01-01

    Plant phenotyping is a very important topic in agriculture. In this context, data mining strategies may be applied to agricultural data retrieved with new non-invasive devices, with the aim of yielding useful, reliable and objective information. This work presents some applications of machine learning algorithms along with in-field acquired NIR spectral data for plant phenotyping in viticulture, specifically for grapevine variety discrimination and assessment of plant water status. Support vector machine (SVM), rotation forests and M5 trees models were built using NIR spectra acquired in the field directly on the adaxial side of grapevine leaves, with a non-invasive portable spectrophotometer working in the spectral range between 1600 and 2400 nm. The ν-SVM algorithm was used for the training of a model for varietal classification. The classifiers' performance for the 10 varieties reached, for cross- and external validations, the 88.7% and 92.5% marks, respectively. For water stress assessment, the models developed using the absorbance spectra of six varieties yielded the same determination coefficient for both cross- and external validations (R² = 0.84; RMSEs of 0.164 and 0.165 MPa, respectively). Furthermore, a variety-specific model trained only with samples of Tempranillo from two different vintages yielded R² = 0.76 and RMSE of 0.16 MPa for cross-validation and R² = 0.79, RMSE of 0.17 MPa for external validation. These results show the power of the combined use of data mining and non-invasive NIR sensing for in-field grapevine phenotyping and their usefulness for the wine industry and precision viticulture implementations. PMID:26891304

  13. Network-based genomic discovery: application and comparison of Markov random field models.

    PubMed

    Wei, Peng; Pan, Wei

    2010-01-01

    As biological knowledge accumulates rapidly, gene networks encoding genome-wide gene-gene interactions have been constructed. As an improvement over the standard mixture model that tests all the genes iid a priori, Wei and Li (2007) and Wei and Pan (2008) proposed modeling a gene network as a Discrete- or Gaussian-Markov random field (DMRF or GMRF) respectively in a mixture model to analyze genomic data. However, how these methods compare in practical applications in not well understood and this is the aim here. We also propose two novel constraints in prior specifications for the GMRF model and a fully Bayesian approach to the DMRF model. We assess the accuracy of estimating the False Discovery Rate (FDR) by posterior probabilities in the context of MRF models. Applications to a ChIP-chip data set and simulated data show that the modified GMRF models has superior performance as compared with other models, while both MRF-based mixture models, with reasonable robustness to misspecified gene networks, outperform the standard mixture model.

  14. Scavenging of rodent carcasses following simulated mortality due to field applications of anticoagulant rodenticide.

    PubMed

    Montaz, Julie; Jacquot, Marion; Coeurdassier, Michaël

    2014-11-01

    Worldwide, agricultural uses of anticoagulant rodenticides (ARs) cause poisonings of non-target wildlife as observed in France where bromadiolone is used to control water vole outbreaks. Following bromadiolone field application, a part of the vole population may die aboveground of the treated plots and thus, can represent an important risk of secondary poisoning for scavengers. In this study, water voles were trapped in a non-treated area and their carcasses were placed aboveground in plots located in an area where a vole outbreak occurred. Then, the environmental persistence, the diurnal and nocturnal scavenging rates of water vole carcasses were assessed in autumn 2011 and in spring 2012. The diurnal scavenger species were also identified. The environmental persistence of the carcasses to reach at least a scavenging rate of 87.5 % was 0.5-1.5 day. The average rates of diurnal and nocturnal scavenging ranged from 67 to 100 % and 5 to 100 %, respectively. They depended on the composition of the scavenger community present near the monitored plots; diurnal scavenging rates being higher with corvids than with raptors. In autumn, the red kite and the common buzzard were the main scavengers in one of the plots, what suggests a high risk of poisoning for these raptors during post-nuptial migration. So, the collection of vole carcasses after treatments and the limitations of bromadiolone applications when high densities of predators/scavengers are observed could be implemented to mitigate the risks of secondary poisoning.

  15. Public Health Models for Preventing Child Maltreatment: Applications From the Field of Injury Prevention.

    PubMed

    Scott, Debbie; Lonne, Bob; Higgins, Daryl

    2016-10-01

    Contemporary approaches to child protection are dominated by individualized forensically focused interventions that provide limited scope for more holistic preventative responses to children at risk and the provision of support to struggling families and communities. However, in many jurisdictions, it is frequently shown, often through public inquiries and program reviews, that investigatory and removal approaches are failing in critically important ways, particularly regarding reducing the inequities that underpin neglect and abuse. Consequently, there have been increasing calls for a public health model for the protection of children, although there is often a lack of clarity as to what exactly this should entail. Yet, there are opportunities to learn from public health approaches successfully used in the field of injury prevention. Specifically, we advocate for the use of Haddon's Matrix, which provides a detailed theoretical and practical framework for the application of a comprehensive and integrated public health model to guide intervention program design and responses to child protection risk factors. A broad overview of the application of Haddon's Matrix's principles and methods is provided with examples of program and intervention design. It is argued that this framework provides the range of interventions necessary to address the complex social and structural factors contributing to inequity and the maltreatment of children. It also provides the foundation for a holistic and integrated system of prevention and intervention to contribute to system-level change and address child maltreatment. PMID:27580666

  16. Modification and Application of a Leaf Blower-vac for Field Sampling of Arthropods.

    PubMed

    Zou, Yi; van Telgen, Mario D; Chen, Junhui; Xiao, Haijun; de Kraker, Joop; Bianchi, Felix J J A; van der Werf, Wopke

    2016-01-01

    Rice fields host a large diversity of arthropods, but investigating their population dynamics and interactions is challenging. Here we describe the modification and application of a leaf blower-vac for suction sampling of arthropod populations in rice. When used in combination with an enclosure, application of this sampling device provides absolute estimates of the populations of arthropods as numbers per standardized sampling area. The sampling efficiency depends critically on the sampling duration. In a mature rice crop, a two-minute sampling in an enclosure of 0.13 m(2) yields more than 90% of the arthropod population. The device also allows sampling of arthropods dwelling on the water surface or the soil in rice paddies, but it is not suitable for sampling fast flying insects, such as predatory Odonata or larger hymenopterous parasitoids. The modified blower-vac is simple to construct, and cheaper and easier to handle than traditional suction sampling devices, such as D-vac. The low cost makes the modified blower-vac also accessible to researchers in developing countries.

  17. Preparation of Silicon Nanowire Field-effect Transistor for Chemical and Biosensing Applications.

    PubMed

    Wu, Jennifer Yun-Shin; Lin, Chih-Heng; Feng, Mei-Huei; Chen, Chien-Hung; Su, Ping-Chia; Yang, Po-Wen; Zheng, Jian-Ming; Fu, Chang-Wei; Yang, Yuh-Shyong

    2016-01-01

    Surveillance using biomarkers is critical for the early detection, rapid intervention, and reduction in the incidence of diseases. In this study, we describe the preparation of polycrystalline silicon nanowire field-effect transistors (pSNWFETs) that serve as biosensing devices for biomarker detection. A protocol for chemical and biomolecular sensing by using pSNWFETs is presented. The pSNWFET device was demonstrated to be a promising transducer for real-time, label-free, and ultra-high-sensitivity biosensing applications. The source/drain channel conductivity of a pSNWFET is sensitive to changes in the environment around its silicon nanowire (SNW) surface. Thus, by immobilizing probes on the SNW surface, the pSNWFET can be used to detect various biotargets ranging from small molecules (dopamine) to macromolecules (DNA and proteins). Immobilizing a bioprobe on the SNW surface, which is a multistep procedure, is vital for determining the specificity of the biosensor. It is essential that every step of the immobilization procedure is correctly performed. We verified surface modifications by directly observing the shift in the electric properties of the pSNWFET following each modification step. Additionally, X-ray photoelectron spectroscopy was used to examine the surface composition following each modification. Finally, we demonstrated DNA sensing on the pSNWFET. This protocol provides step-by-step procedures for verifying bioprobe immobilization and subsequent DNA biosensing application. PMID:27167162

  18. Fundamental Aspects and Applications of Low-Field Electron Emission from Nano-Carbons

    NASA Astrophysics Data System (ADS)

    Obraztsov, A. N.; Volkov, A. P.; Zakhidov, Al. A.; Lyashenko, D. A.; Petrushenko, Yu. V.; Satanovskaya, O. P.

    2004-09-01

    Low-field electron emission (LFEE) from various carbon related materials has high attractiveness for application to replace metal or semiconductor micro-tip arrays in vacuum electronic devices and electron beam technologies such as flat panel displays, microwave tubes, miniature X-ray sources, mass-spectrometers, electron-beam lithography etc. Evaluation of yhe carbon cold cathode applicability requires understanding of the LFEE mechanisms. In our work we have performed experimental and theoretical study of the electron emission from nano-carbon thin film materials grown by CVD. An empirical model of the LFEE sites was proposed on base of comprehensive study of structural and electronic characteristics of the carbon cathodes. The modifications of usual Fowler-Nordheim theory were proposed for adequate qualitative and quantitative description of the experimental LFEE observations. The prototypes of highly efficient light sources based on the nano-carbon cathodes were designed and tested. The lamps brightness of 200000 cd/m2 and record energy efficiency were demonstrated.

  19. Modification and Application of a Leaf Blower-vac for Field Sampling of Arthropods.

    PubMed

    Zou, Yi; van Telgen, Mario D; Chen, Junhui; Xiao, Haijun; de Kraker, Joop; Bianchi, Felix J J A; van der Werf, Wopke

    2016-01-01

    Rice fields host a large diversity of arthropods, but investigating their population dynamics and interactions is challenging. Here we describe the modification and application of a leaf blower-vac for suction sampling of arthropod populations in rice. When used in combination with an enclosure, application of this sampling device provides absolute estimates of the populations of arthropods as numbers per standardized sampling area. The sampling efficiency depends critically on the sampling duration. In a mature rice crop, a two-minute sampling in an enclosure of 0.13 m(2) yields more than 90% of the arthropod population. The device also allows sampling of arthropods dwelling on the water surface or the soil in rice paddies, but it is not suitable for sampling fast flying insects, such as predatory Odonata or larger hymenopterous parasitoids. The modified blower-vac is simple to construct, and cheaper and easier to handle than traditional suction sampling devices, such as D-vac. The low cost makes the modified blower-vac also accessible to researchers in developing countries. PMID:27584040

  20. Plant Resistance Inducers against Pathogens in Solanaceae Species—From Molecular Mechanisms to Field Application

    PubMed Central

    Alexandersson, Erik; Mulugeta, Tewodros; Lankinen, Åsa; Liljeroth, Erland; Andreasson, Erik

    2016-01-01

    This review provides a current summary of plant resistance inducers (PRIs) that have been successfully used in the Solanaceae plant family to protect against pathogens by activating the plant’s own defence. Solanaceous species include many important crops such as potato and tomato. We also present findings regarding the molecular processes after application of PRIs, even if the number of such studies still remains limited in this plant family. In general, there is a lack of patterns regarding the efficiency of induced resistance (IR) both between and within solanaceous species. In many cases, a hypersensitivity-like reaction needs to form in order for the PRI to be efficient. “-Omics” studies have already given insight in the complexity of responses, and can explain some of the differences seen in efficacy of PRIs between and within species as well as towards different pathogens. Finally, examples of field applications of PRIs for solanaceous crops are presented and discussed. We predict that PRIs will play a role in future plant protection strategies in Solanaceae crops if they are combined with other means of disease control in different spatial and temporal combinations. PMID:27706100

  1. [Further reduction of nitrogen fertilizer application in paddy field under green manuring of Taihu Area, China].

    PubMed

    Zhao, Dong; Yan, Ting-mei; Qiao, Jun; Yang, Lin-zhang; Tang, Fang; Song, Yun-fei

    2015-06-01

    This study focused on the nitrogen loss via runoff, change of nitrogen in different forms in surface water in paddy field, and grain yield, through further reduction of nitrogen fertilizer application rate under green manuring without basal dressing. Results showed that with 150 kg · hm(-2) inorganic N fertilizer input after return of green manure to soil, no basal dressing could not only sharply reduce N concentration in surface water and decrease 17.2% of N loss, but also increase 2.8% of grain yield in comparison with basal dressing. It was a worthwhile farming method that inorganic nitrogen fertilizer was not used for basal dressing but for topdressing after return of green ma- nure to soil in Taihu Area. However, the grain yield would decrease if the rate of topdressing nitro- gen was excessively reduced or increased. After all, it was feasible to realize harmonization of grain yield and environmental benefits in Taihu Area, with 133 kg · hm(-2) inorganic N fertilizer input after return of green manure to soil as well as no application of basal dressing, which could greatly reduce N fertilizer input and N loss as well as ensure rice yield.

  2. [Further reduction of nitrogen fertilizer application in paddy field under green manuring of Taihu Area, China].

    PubMed

    Zhao, Dong; Yan, Ting-mei; Qiao, Jun; Yang, Lin-zhang; Tang, Fang; Song, Yun-fei

    2015-06-01

    This study focused on the nitrogen loss via runoff, change of nitrogen in different forms in surface water in paddy field, and grain yield, through further reduction of nitrogen fertilizer application rate under green manuring without basal dressing. Results showed that with 150 kg · hm(-2) inorganic N fertilizer input after return of green manure to soil, no basal dressing could not only sharply reduce N concentration in surface water and decrease 17.2% of N loss, but also increase 2.8% of grain yield in comparison with basal dressing. It was a worthwhile farming method that inorganic nitrogen fertilizer was not used for basal dressing but for topdressing after return of green ma- nure to soil in Taihu Area. However, the grain yield would decrease if the rate of topdressing nitro- gen was excessively reduced or increased. After all, it was feasible to realize harmonization of grain yield and environmental benefits in Taihu Area, with 133 kg · hm(-2) inorganic N fertilizer input after return of green manure to soil as well as no application of basal dressing, which could greatly reduce N fertilizer input and N loss as well as ensure rice yield. PMID:26572018

  3. Field application of a biofilm reactor based BOD prototype in Taihu Lake, China.

    PubMed

    Liu, Changyu; Dong, Shaojun

    2013-05-15

    A tubular biofilm reactor (BFR) based online biochemical oxygen demand prototype was applied in Taihu Lake, China. Municipal tap water was used instead of conventional phosphate buffer as blank solution to avoid phosphate pollution. The background organic compounds in municipal tap water were taken into account and they were validated to result in negative deviation to accuracy. The microbial endogenous respiration was experimentally validated to be sensitive to salt ionic strength, and municipal tap water as blank was thought to generate positive deviation to accuracy. The system was continuously operated over 2 months without man intervention, and the automated monitoring data agreed well with that of the conventional BOD5 methods. The BFR resisted the frequent measurements with samples of high turbidity, and the BOD monitoring data indicated the index of biodegradable organic compounds of Taihu Lake was accorded with the second class described in the environmental quality standard of surface water. Analyzed together with permanganate index on site, Taihu Lake was revealed to be of good capacity of self cleaning. Importantly, field application study of new BOD method made it more objective in evaluating its applicability, and could provide practical information and useful improvements in the process of commercializing.

  4. Scavenging of rodent carcasses following simulated mortality due to field applications of anticoagulant rodenticide.

    PubMed

    Montaz, Julie; Jacquot, Marion; Coeurdassier, Michaël

    2014-11-01

    Worldwide, agricultural uses of anticoagulant rodenticides (ARs) cause poisonings of non-target wildlife as observed in France where bromadiolone is used to control water vole outbreaks. Following bromadiolone field application, a part of the vole population may die aboveground of the treated plots and thus, can represent an important risk of secondary poisoning for scavengers. In this study, water voles were trapped in a non-treated area and their carcasses were placed aboveground in plots located in an area where a vole outbreak occurred. Then, the environmental persistence, the diurnal and nocturnal scavenging rates of water vole carcasses were assessed in autumn 2011 and in spring 2012. The diurnal scavenger species were also identified. The environmental persistence of the carcasses to reach at least a scavenging rate of 87.5 % was 0.5-1.5 day. The average rates of diurnal and nocturnal scavenging ranged from 67 to 100 % and 5 to 100 %, respectively. They depended on the composition of the scavenger community present near the monitored plots; diurnal scavenging rates being higher with corvids than with raptors. In autumn, the red kite and the common buzzard were the main scavengers in one of the plots, what suggests a high risk of poisoning for these raptors during post-nuptial migration. So, the collection of vole carcasses after treatments and the limitations of bromadiolone applications when high densities of predators/scavengers are observed could be implemented to mitigate the risks of secondary poisoning. PMID:25147048

  5. Public Health Models for Preventing Child Maltreatment: Applications From the Field of Injury Prevention.

    PubMed

    Scott, Debbie; Lonne, Bob; Higgins, Daryl

    2016-10-01

    Contemporary approaches to child protection are dominated by individualized forensically focused interventions that provide limited scope for more holistic preventative responses to children at risk and the provision of support to struggling families and communities. However, in many jurisdictions, it is frequently shown, often through public inquiries and program reviews, that investigatory and removal approaches are failing in critically important ways, particularly regarding reducing the inequities that underpin neglect and abuse. Consequently, there have been increasing calls for a public health model for the protection of children, although there is often a lack of clarity as to what exactly this should entail. Yet, there are opportunities to learn from public health approaches successfully used in the field of injury prevention. Specifically, we advocate for the use of Haddon's Matrix, which provides a detailed theoretical and practical framework for the application of a comprehensive and integrated public health model to guide intervention program design and responses to child protection risk factors. A broad overview of the application of Haddon's Matrix's principles and methods is provided with examples of program and intervention design. It is argued that this framework provides the range of interventions necessary to address the complex social and structural factors contributing to inequity and the maltreatment of children. It also provides the foundation for a holistic and integrated system of prevention and intervention to contribute to system-level change and address child maltreatment.

  6. Short-Term Increase of Nitrogen Leaching in a Tea Field after Heavy Application of Organic Fertilizer

    NASA Astrophysics Data System (ADS)

    Miura, Nobuyuki; Uchimura, Koji; Nakamura, Takahisa; Karasuyama, Mitsuaki; Ae, Noriharu

    Since 1999, the annual amount of fertilizer applied to tea fields has been restricted to 50 kgN/10a as much as possible to avoid nitrate pollution of groundwater; however, the nitrogen application tends to be similar to the previous high fertilizer levels to sustain high yields and superior tea quality in recent years. We investigated how this restoration of the previous heavy application affects nitrogen leaching and the forms of nitrogen in the soil. According to our measurements, the increase in the application of organic fertilizer from 50 to 87-100 kgN/10a increased the concentration of nitrate leaching into underdrainage after ten months of heavy application. After another month, the nitrate concentration in the underdrainage reached the levels obtained previously under heavy application of organic fertilizer. This period (11 months) was six months shorter than the period required for the reduction of nitrate concentration to a prescribed plateau following the restriction of nitrogen application. Protein-like organic nitrogen in the soil increased one year after the heavy application of organic fertilizer with little increase in total nitrogen content. These results show that restoration of reduced nitrogen application to areas with previous heavy application rapidly increases nitrate leaching from the tea field with little increase in nitrogen accumulation in the soil. Our results suggest that restoration of the previous heavy application of organic fertilizer has the effect of rapidly increasing nitrogen loading to groundwater in tea cultivation areas.

  7. 40 CFR 74.22 - Actual SO2 emissions rate.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 40 Protection of Environment 17 2012-07-01 2012-07-01 false Actual SO2 emissions rate. 74.22... (CONTINUED) SULFUR DIOXIDE OPT-INS Allowance Calculations for Combustion Sources § 74.22 Actual SO2 emissions... actual SO2 emissions rate shall be 1985. (2) For combustion sources that commenced operation...

  8. Actualization and the Fear of Death: Retesting an Existential Hypothesis.

    ERIC Educational Resources Information Center

    Wood, Keith; Robinson, Paul J.

    1982-01-01

    Demonstrates that within a group of highly actualized individuals, the degree to which "own death" is integrated into constructs of self is a far more powerful predictor of fear of death than actualization. Findings suggest that actualization and integration are independent in their overall effect on fear of death. (Author)

  9. SU-E-T-262: Planning for Proton Pencil Beam Scanning (PBS): Applications of Gradient Optimization for Field Matching

    SciTech Connect

    Lin, H; Kirk, M; Zhai, H; Ding, X; Liu, H; Hill-Kayser, C; Lustig, R; Tochner, Z; Deville, C; Vapiwala, N; McDonough, J; Both, S

    2014-06-01

    Purpose: To propose the gradient optimization(GO) approach in planning for matching proton PBS fields and present two commonly used applications in our institution. Methods: GO is employed for PBS field matching in the scenarios that when the size of the target is beyond the field size limit of the beam delivery system or matching is required for beams from different angles to either improve the sparing of important organs or to pass through a short and simple beam path. Overlap is designed between adjacent fields and in the overlapped junction, the dose was optimized such that it gradually decreases in one field and the decrease is compensated by increase from another field. Clinical applications of this approach on craniospinal irradiation(CSI) and whole pelvis treatment were presented. Mathematical model was developed to study the relationships between dose errors, setup errors and junction lengths. Results: Uniform and conformal dose coverage to the entire target volumes was achieved for both applications using GO approach. For CSI, the gradient matching (6.7cm junction) between fields overcame the complexity of planning associated with feathering match lines. A slow dose gradient in the junction area significantly reduced the sensitivity of the treatment to setup errors. For whole pelvis, gradient matching (4cm junction) between posterior fields for superior target and bilateral fields for inferior target provided dose sparing to organs such as bowel, bladder and rectum. For a setup error of 3 mm in longitudinal direction from one field, mathematical model predicted dose errors of 10%, 6% and 4.3% for junction length of 3, 5 and 7cm. Conclusion: This GO approach improves the quality of the PBS treatment plan with matching fields while maintaining the safety of treatment delivery relative to potential misalignments.

  10. Field Utilization and Analysis of AIS 128-channel Imagery Using Microcomputers: Application to Yerington, Nevada Field Area

    NASA Technical Reports Server (NTRS)

    Lyon, R. J. P.; Lanz, K.

    1985-01-01

    Geologists in exploration need to be able to determine the mineral composition of a given outcrop, and then proceed to another in order to carry out the process of geologic mapping. Since April 1984 researchers have been developing a portable microcomputer-based imaging system (with a grey-scale of 16 shades of amber), which were demonstrated during the November 1984 GSA field trip in the field at Yerington, NV. A color-version of the same technology was recently demonstrated. The portable computer selected is a COLBY 10-Megabyte, hard disk-equipped repackaged-IBM/XT, which operates on either 110/220 VAC or on 12VDC from the cigarette lighter in a field vehicle. A COMPAQ PLUS or an IBM Portable will also work on modified software. The underlying concept is that the atmospheric transmission and surface albedo/slope terms are multiplicative, relating the spectral irradiance to the spectral color of the surface materials. Thus, the spectral color of a pixel remains after averaged log-albedo and log-irradiance have been estimated. All these steps can be carried out on the COLBY microcomputer, using 80 image lines of the 128-channel, 12-bit imagery. Results are shown for such an 80-line segment, showing the identification of an O-H bearing mineral group (of slightly varying specific characters) on the flight line.

  11. Salmonella and fecal indicator bacteria in tile waters draining poultry litter application fields in central Iowa

    NASA Astrophysics Data System (ADS)

    Hruby, C.; Soupir, M.

    2012-12-01

    E. coli and enterococci are commonly used as pathogen indicators in surface waters. Along with these indicators, pathogenic Salmonella are prevalent in poultry litter, and have the potential to be transported from land-application areas to tile waters and ultimately to impact waters that are used for drinking-water and recreation. The fate and transport of these bacteria to drainage tiles from application fields, and the correlation of fecal indicator bacteria to pathogens in this setting, is poorly understood. In this field study, samples were obtained from poultry litter, soil, and drainage tile waters below chisel-plowed and no-till cornfields in central Iowa where poultry litter was applied each year in late spring prior to planting. Litter was applied at three different rates; commercial fertilizer with no litter, a low application rate based on the nitrogen requirements of the corn (PL1), and double the low rate (PL2). This site is characterized by low sloping (0-9%) Clarion and Nicollet soils, which are derived from glacial till. Samples were collected from April to September for three years (2010-12) when tiles were flowing. Record high precipitation fell during the sampling period in 2010, while 2011 and 2012 were exceptionally dry years at this location. Grab samples were taken directly from flowing tiles after every rainfall event (>2 cm in less than 24 hours) and samples were collected hourly throughout selected events using an automatic sampling device. Concentrations of E. coli, enterococci and Salmonella spp. were quantified by membrane filtration and growth on selective agars. Peak bacteria concentrations following rainfall events were often one order of magnitude higher in tile waters discharging from no-till plots, despite the smaller size and lower tile flow rates at these plots compared to the chisel-plowed plots. Bacteria concentrations regularly varied by two orders of magnitude in response to rainfall events. Bacteria transport via macropores

  12. Flux pinning study of RE barium coper oxide coated conductors for high field magnet applications

    NASA Astrophysics Data System (ADS)

    Xu, Aixia

    REBa2Cu3O7-δ (REBCO, RE = rare earth) coated conductor (CC) holds great promise for high field magnet applications owing to its strong irreversibility field (Hirr), low electromagnetic anisotropy (γ2), and high critical current density (Jc). The work of this thesis is tightly related to the development of the funded 32 T, all-superconducting magnet project at the NHMFL. My concern is thus for understanding the optimizing of the working parameters of REBCO CC at low temperatures T, and very high magnetic fields H, focusing on how to enhance Ic and to reduce its angular dependence. Increasing the active cross-section is a direct and economical strategy to enhance the current-carrying capability for REBCO coated conductors. Unfortunately, the high Jc in thin REBCO layers is seldom sustained in thick layers because of difficulties of thick film growth control. In the presence of strong 3D (pin separation far less than film thickness) pins, a high and thickness-independent (Jc) should result. One of major tasks of this thesis is to explore what are the effective strong 3D pins that develop a high and thickness-independent Jc. High and weak thickness-dependent Jc at 77 K is obtained on most recent coated conductors, and BZO nanorods and RE2O 3 nanoparticles are identified as strong 3D pins contributing to this respectable Jc performance. At 77 K, we found that the strong pinning of BZO nanorods remains at least up to 9 T, whereas the strong pinning of RE2O3 nanoparticles gradually evolves to weak collective pinning as the irreversibility field is approached. The second principal part of this thesis concentrates on understanding and minimizing the angular dependence of Jc. Our study is based on the following procedure. First, we investigated the angular dependence of Jc (Jc(θ)) in the working condition of the future 32 T all-superconducting magnet, i.e. 4.2 K and high magnetic field up to 31 T. Our work shows that the low temperature Jc(θ) is Ginzburg-Landau-like at

  13. Controlled deposition or organic semiconductor single crystals and its application in field-effect transistors

    NASA Astrophysics Data System (ADS)

    Liu, Shuhong

    The search for low-cost, large area, flexible devices has led to a remarkable increase in the research and development of organic semiconductors. Single-crystal organic field-effect transistors (OFETs) are ideal device structures for studying fundamental science associated with charge transport in organic materials and have demonstrated high mobility and outstanding electrical characteristics. For example, an exceptionally high carrier mobility of 20 cm2/Vs has been demonstrated for rubrene single crystal field effect transistors. However, it remains a technical challenge to integrate single-crystal devices into practical electronic applications. A key difficulty is that organic single-crystal devices are usually fabricated one device at a time by handpicking a single crystal and placing it onto the device substrate. This makes it impossible to mass-produce at high density with reasonable throughput. Therefore, there is a great need for a high-throughput method for depositing large arrays of organic semiconductor single crystals directly onto device structures. In this dissertation, I develop several approaches towards realizing this goal. The first approach is a solution-processing technique, which relies on solvent wetting and de-wetting on substrates with patterned wettability to selectively direct the deposition or removal of organic crystals. The assembly of different organic crystals over centimeter-squared areas on Au, SiO 2 and flexible plastic substrates is demonstrated. By designing line features on the substrate, alignment of needle-like crystals is also achieved. As a demonstration of the potential application of this approach, arrays of organic single crystal FETs are fabricated by patterning organic single crystals directly onto and between transistor source and drain electrodes. Besides organic single crystals, this self-assembly strategy is also applicable for patterning other objects such as metallic nanowires. In the second technique, organic

  14. Configurations and control of magnetic fields for manipulating magnetic particles in microfluidic applications: magnet systems and manipulation mechanisms.

    PubMed

    Cao, Quanliang; Han, Xiaotao; Li, Liang

    2014-08-01

    The use of a magnetic field for manipulating the motion of magnetic particles in microchannels has attracted increasing attention in microfluidic applications. Generation of a flexible and controllable magnetic field plays a crucial role in making better use of the particle manipulation technology. Recent advances in the development of magnet systems and magnetic field control methods have shown that it has great potential for effective and accurate manipulation of particles in microfluidic systems. Starting with the analysis of magnetic forces acting on the particles, this review gives the configurations and evaluations of three main types of magnet system proposed in microfluidic applications. The interaction mechanisms of magnetic particles with magnetic fields are also discussed.

  15. Rapid tsunami models and earthquake source parameters: Far-field and local applications

    USGS Publications Warehouse

    Geist, E.L.

    2005-01-01

    Rapid tsunami models have recently been developed to forecast far-field tsunami amplitudes from initial earthquake information (magnitude and hypocenter). Earthquake source parameters that directly affect tsunami generation as used in rapid tsunami models are examined, with particular attention to local versus far-field application of those models. First, validity of the assumption that the focal mechanism and type of faulting for tsunamigenic earthquakes is similar in a given region can be evaluated by measuring the seismic consistency of past events. Second, the assumption that slip occurs uniformly over an area of rupture will most often underestimate the amplitude and leading-wave steepness of the local tsunami. Third, sometimes large magnitude earthquakes will exhibit a high degree of spatial heterogeneity such that tsunami sources will be composed of distinct sub-events that can cause constructive and destructive interference in the wavefield away from the source. Using a stochastic source model, it is demonstrated that local tsunami amplitudes vary by as much as a factor of two or more, depending on the local bathymetry. If other earthquake source parameters such as focal depth or shear modulus are varied in addition to the slip distribution patterns, even greater uncertainty in local tsunami amplitude is expected for earthquakes of similar magnitude. Because of the short amount of time available to issue local warnings and because of the high degree of uncertainty associated with local, model-based forecasts as suggested by this study, direct wave height observations and a strong public education and preparedness program are critical for those regions near suspected tsunami sources.

  16. Application of Effective Field Theories to Problems in Nuclear and Hadronic Physics

    NASA Astrophysics Data System (ADS)

    Mereghetti, Emanuele

    The Effective Field Theory formalism is applied to the study of problems in hadronic and nuclear physics. We develop a framework to study the exclusive two-body decays of bottomonium into two charmed mesons and apply it to study the decays of the C-even bottomonia. Using a sequence of effective field theories, we take advantage of the separation between the scales contributing to the decay processes, 2mb >> mc >> ΛQCD. We prove that, at leading order in the EFT power counting, the decay rate factorizes into the convolution of two perturbative matching coefficients and three non-perturbative matrix elements, one for each hadron. We calculate the relations between the decay rate and non-perturbative bottomonium and D-meson matrix elements at leading order, with next-to-leading log resummation. The phenomenological implications of these relations are discussed. At lower energies, we use Chiral Perturbation Theory and nuclear EFTs to set up a framework for the study of time reversal (T) symmetry in one- and few-nucleon problems. We consider T violation from the QCD theta term and from all the possible dimension 6 operators, expressed in terms of light quarks, gluons and photons, that can be added to the Standard Model Lagrangian. We construct the low energy chiral Lagrangian stemming from different TV sources, and derive the implications for the nucleon Electric Dipole Form Factor and the deuteron T violating electromagnetic Form Factors. Finally, with an eye to applications to nuclei with A ≥ 2, we construct the T violating nucleon-nucleon potential from different sources of T violation.

  17. Temporal patterns of methane emissions from wetland rice fields treated by different modes of N application

    NASA Astrophysics Data System (ADS)

    Wassmann, R.; Neue, H. U.; Lantin, R. S.; Aduna, J. B.; Alberto, M. C. R.; Andales, M. J.; Tan, M. J.; van der Gon, H. A. C. Denier; Hoffmann, H.; Papen, H.; Rennenberg, H.; Seiler, W.

    1994-08-01

    Methane emission rates from wetland rice fields were determined in Los Baños (Philippines) using an automatic system that allows continuous measurements over time. Methane emission was monitored in an irrigated Aquandic Epiaqualf planted to rice cultivar IR72. Urea fertilizer was applied using four modes: (1) broadcast 10 days after transplanting, (2) broadcast at transplanting, (3) broadcast and incorporated at final harrowing, and (4) deep placement as sulfur-coated granules. The treatments were laid out in a randomized complete block design with four replicates. Measurements were done in the 1991 wet season, 1992 dry season (four treatments), and the 1992 wet season (only treatment 3). Methane emission rates from the experimental plots showed pronounced seasonal and diel variations. The diel pattern of methane emission rates followed a consistent pattern, with highest rates observed in the early afternoon and lowest rates in the early morning. Methane emission rate was generally highest at the ripening stage. The average methane emission rate during the 1992 dry season (190 mg CH4 m-2 d-1) exceeded the average flux rates of the 1992 wet season (79 mg CH4 m-2 d-1) by a factor of 2.4. The total methane emitted from these flooded rice fields amounted to 19 g CH4 m-2 in the dry season with rice yields of 5.2-6.3 t ha-1 and 7 g CH4 m-2 in the wet season with rice yields of 2.4-3.3 t ha-1 regardless of the mode of N application. Significant amounts corresponding to 20% of the methane released under waterlogged conditions were released when the soil was drained after harvest. Emission rates increased sharply when the floodwater receded and macropores started to drain. Emission of methane stopped only when the soil became fully aerated.

  18. Superconducting Thin Films for SRF Cavity Applications: A Route to Higher Field Gradient Linacs

    NASA Astrophysics Data System (ADS)

    Roach, Wiliam Michael

    Many linear accelerator (linac) applications rely on the use of superconducting radio frequency (SRF) cavities. In order to overcome the current field gradient limits imposed by the use of bulk niobium, a model involving the deposition of alternating superconducting-insulating-superconducting (SIS) thin films onto the interior surface of SRF cavities has been proposed. Since SRF performance is a surface phenomenon, the critical surface of these cavities is less than 1 micron thick, thus enabling the use of thin films. Before such approach can successfully be implemented fundamental studies correlating the microstructure and superconducting properties of thin films are needed. To this end the effect of grain boundary density and interfacial strain in thin films has been explored. Thin films with a smaller grain boundary density were found to have better superconducting properties than films with a larger grain boundary density. Interfacial strain due to a lattice mismatch between the film and substrate lead to two regions in films, one strained region near the interface and one relaxed region away from the interface. The presence of two regions in the film resulted in two types of superconducting behavior. Niobium films were deposited onto copper surfaces to help understand why previous attempts of implementing niobium coated copper cavities in order to exploit the better thermal properties of copper had varying degrees of success. It was found that an increased growth temperature produced niobium films with larger grains and correspondingly better superconducting properties. Proof of principle multilayer samples were prepared to test the SIS model. For the first time, multilayers were produced that were capable of shielding an underlying niobium film from vortex penetration beyond the lower critical field of bulk niobium. This result provides evidence supporting the feasibility of the SIS model.

  19. Investigating electrokinetics application for in-situ inorganic oil field scale control

    NASA Astrophysics Data System (ADS)

    Hashaykeh, Manal A. I. Albadawi

    Oil well scale formation and deposition is an expensive problem and could be a nightmare for any production engineer if the rate of deposition is rapid as in the case of North Sea oil fields. Inorganic scales accumulate in surface and subsurface equipment causing a reduction in oil production and severe damage for production equipment. The major components of most oil field scale deposits are BaSO4, CaSO4 and SrSO4, which are formed due to incompatible mixing of reservoir formation water and sea water flooded in secondary enhanced oil recovery (EOR) processes. This work focuses on BaSO4 scale as it is one of the toughest scale components to be removed either by chemical means or mechanical means. Scale control methods usually involve complicated treatment using chemical dissolution methods as primary attempt and mechanical scrapping or jetting methods in case of failure of the chemical means. In this work, we devised a novel in-situ scale control method benefiting from the application of direct current (DC) which involves some of the electrokinetic (EK) phenomena. The applications of EK has been proved in our laboratories yielding high efficiency in capturing barium and separating it from sulfate before reaching the production well, thus preventing deposition in the production wellbore or wellbore formation. This objective was evaluated in our lab designed EK apparatus in three parts. In part-1, an 18.5 cm unconsolidated sand core was used which produced inconsistent results. This problem was overcome in part-2, where the porous media involved 46 cm consolidated sandcore. This also partly fulfilled the purpose of upscaling. In part-3, the porous media was extended to a 100 cm spatial distance between the injection and production wells. For all the experiments the reservoir models were made of 125 µm uniform sand particles and followed a final consolidation pressure of 30 psi. The EK-reservoir model contains 2 basic junctions; one of them injecting a 500 ppm SO4 2

  20. Application of closed field magnetron sputtering deposition in thin film photovoltaics

    NASA Astrophysics Data System (ADS)

    Gibson, D. R.; Waugh, A. R.; Upadhyaya, Hari M.; Nasikkar, P. S.; Walls, J. M.

    2009-08-01

    Thin film solar cell technology is highly promising to enable clean and low cost generation of solar electricity for various applications. The high efficiency, flexibility and lightweight advantages of thin film solar cells, together with stable performance and potentially low production costs, further enhance their attractiveness for both terrestrial and space applications. A distinct manufacturing advantage of thin film solar cells is the use of fast vacuum deposition methods, providing the high throughput essential to reduce manufacturing costs. However, an essential pre-requisite is the development of deposition techniques which combine capability to deposit the solar cell thin film multilayer preferably within a single vacuum cycle, removing the requirement for certain process steps to be carried out using non-vacuum wet chemistry. Moreover, process development is also needed to provide low temperature processing and low stress multilayer thin film structures which enable photovoltaic devices to be deposited on to low cost flexible polymer or metal substrates. In this paper a new sputtering tool strategy is introduced, utilising high plasma densities (~10mA.cm-2) and low ion energies, thereby lowering process temperature and film stress for deposition onto both flexible and solid substrates. The technique uses magnetrons of opposing magnetic polarity to create a "closed field" in which the plasma density is enhanced without the need for high applied voltages. A prototype batch system has been designed which employs a rotating vertical drum as the substrate carrier and a symmetrical array of four linear magnetrons. The magnetrons are fitted with target materials for each of the thin films required in the PV stack including the CdTe absorber layer, CdS buffer layer and the back TCO contact. Details of the system design will be provided together with optical, electrical and metrology data already obtained from ITO thin films. The "closed field" sputtering